From 1ca5b9d2183f11bb8b69e04b19a7faf7f600a840 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 4 May 2008 01:31:42 -0400 Subject: power_supply: Support serial number in olpc_battery This adds serial number support to the OLPC battery driver. Signed-off-by: David Woodhouse Signed-off-by: Andres Salomon Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index ab1e8289f07f..7524a63a54cb 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -84,6 +84,8 @@ static struct power_supply olpc_ac = { .get_property = olpc_ac_get_prop, }; +static char bat_serial[17]; /* Ick */ + /********************************************************************* * Battery properties *********************************************************************/ @@ -94,6 +96,7 @@ static int olpc_bat_get_property(struct power_supply *psy, int ret = 0; int16_t ec_word; uint8_t ec_byte; + uint64_t ser_buf; ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1); if (ret) @@ -241,6 +244,14 @@ static int olpc_bat_get_property(struct power_supply *psy, ec_word = be16_to_cpu(ec_word); val->intval = ec_word * 100 / 256; break; + case POWER_SUPPLY_PROP_SERIAL_NUMBER: + ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8); + if (ret) + return ret; + + sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf)); + val->strval = bat_serial; + break; default: ret = -EINVAL; break; @@ -260,6 +271,7 @@ static enum power_supply_property olpc_bat_props[] = { POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TEMP_AMBIENT, POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_SERIAL_NUMBER, }; /********************************************************************* -- cgit v1.2.3 From d7eb9e36c42504e87c7d92dd5c05cb6f2cf74d28 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 2 May 2008 13:41:58 -0700 Subject: power_supply: add eeprom dump file to olpc_battery's sysfs This allows you to dump 0x60 bytes from the battery's EEPROM (starting at address 0x20). Note that it does an EC command for each byte, so it's pretty slow. OTOH, if you want to grab just a single byte from somewhere in the EEPROM, you can do something like: dd bs=1 count=1 skip=16 if=/sys/class/power_supply/olpc-battery/eeprom | od -x Userspace battery collection/logging information needs this. Signed-off-by: Andres Salomon Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 49 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 7524a63a54cb..f8dc2b18bb49 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -274,6 +274,48 @@ static enum power_supply_property olpc_bat_props[] = { POWER_SUPPLY_PROP_SERIAL_NUMBER, }; +/* EEPROM reading goes completely around the power_supply API, sadly */ + +#define EEPROM_START 0x20 +#define EEPROM_END 0x80 +#define EEPROM_SIZE (EEPROM_END - EEPROM_START) + +static ssize_t olpc_bat_eeprom_read(struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, size_t count) +{ + uint8_t ec_byte; + int ret, end; + + if (off >= EEPROM_SIZE) + return 0; + if (off + count > EEPROM_SIZE) + count = EEPROM_SIZE - off; + + end = EEPROM_START + off + count; + for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) { + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, + &buf[ec_byte - EEPROM_START], 1); + if (ret) { + printk(KERN_ERR "olpc-battery: EC command " + "EC_BAT_EEPROM @ 0x%x failed -" + " %d!\n", ec_byte, ret); + return -EIO; + } + } + + return count; +} + +static struct bin_attribute olpc_bat_eeprom = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO, + .owner = THIS_MODULE, + }, + .size = 0, + .read = olpc_bat_eeprom_read, +}; + /********************************************************************* * Initialisation *********************************************************************/ @@ -327,8 +369,14 @@ static int __init olpc_bat_init(void) if (ret) goto battery_failed; + ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom); + if (ret) + goto eeprom_failed; + goto success; +eeprom_failed: + power_supply_unregister(&olpc_bat); battery_failed: power_supply_unregister(&olpc_ac); ac_failed: @@ -339,6 +387,7 @@ success: static void __exit olpc_bat_exit(void) { + device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom); power_supply_unregister(&olpc_bat); power_supply_unregister(&olpc_ac); platform_device_unregister(bat_pdev); -- cgit v1.2.3 From b2bd8a3bcdd18101eb5d85c267c1a1fb8ce9acc7 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 2 May 2008 13:41:59 -0700 Subject: power_supply: cleanup of the OLPC battery driver Move portions of the massive switch statement into functions. The layout of this thing has already caused one bug (a break in the wrong place), it needed to shrink. Signed-off-by: Andres Salomon Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 191 ++++++++++++++++++++++++++----------------- 1 file changed, 118 insertions(+), 73 deletions(-) diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index f8dc2b18bb49..d5fe6f0c9de0 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -86,6 +86,117 @@ static struct power_supply olpc_ac = { static char bat_serial[17]; /* Ick */ +static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte) +{ + if (olpc_platform_info.ecver > 0x44) { + if (ec_byte & BAT_STAT_CHARGING) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (ec_byte & BAT_STAT_DISCHARGING) + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (ec_byte & BAT_STAT_FULL) + val->intval = POWER_SUPPLY_STATUS_FULL; + else /* er,... */ + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + } else { + /* Older EC didn't report charge/discharge bits */ + if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */ + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (ec_byte & BAT_STAT_FULL) + val->intval = POWER_SUPPLY_STATUS_FULL; + else /* Not _necessarily_ true but EC doesn't tell all yet */ + val->intval = POWER_SUPPLY_STATUS_CHARGING; + } + + return 0; +} + +static int olpc_bat_get_health(union power_supply_propval *val) +{ + uint8_t ec_byte; + int ret; + + ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1); + if (ret) + return ret; + + switch (ec_byte) { + case 0: + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + + case BAT_ERR_OVERTEMP: + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + break; + + case BAT_ERR_OVERVOLTAGE: + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + break; + + case BAT_ERR_INFOFAIL: + case BAT_ERR_OUT_OF_CONTROL: + case BAT_ERR_ID_FAIL: + case BAT_ERR_ACR_FAIL: + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + break; + + default: + /* Eep. We don't know this failure code */ + ret = -EIO; + } + + return ret; +} + +static int olpc_bat_get_mfr(union power_supply_propval *val) +{ + uint8_t ec_byte; + int ret; + + ec_byte = BAT_ADDR_MFR_TYPE; + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + if (ret) + return ret; + + switch (ec_byte >> 4) { + case 1: + val->strval = "Gold Peak"; + break; + case 2: + val->strval = "BYD"; + break; + default: + val->strval = "Unknown"; + break; + } + + return ret; +} + +static int olpc_bat_get_tech(union power_supply_propval *val) +{ + uint8_t ec_byte; + int ret; + + ec_byte = BAT_ADDR_MFR_TYPE; + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + if (ret) + return ret; + + switch (ec_byte & 0xf) { + case 1: + val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH; + break; + case 2: + val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe; + break; + default: + val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; + break; + } + + return ret; +} + /********************************************************************* * Battery properties *********************************************************************/ @@ -113,25 +224,10 @@ static int olpc_bat_get_property(struct power_supply *psy, switch (psp) { case POWER_SUPPLY_PROP_STATUS: - if (olpc_platform_info.ecver > 0x44) { - if (ec_byte & BAT_STAT_CHARGING) - val->intval = POWER_SUPPLY_STATUS_CHARGING; - else if (ec_byte & BAT_STAT_DISCHARGING) - val->intval = POWER_SUPPLY_STATUS_DISCHARGING; - else if (ec_byte & BAT_STAT_FULL) - val->intval = POWER_SUPPLY_STATUS_FULL; - else /* er,... */ - val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; - } else { - /* Older EC didn't report charge/discharge bits */ - if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */ - val->intval = POWER_SUPPLY_STATUS_DISCHARGING; - else if (ec_byte & BAT_STAT_FULL) - val->intval = POWER_SUPPLY_STATUS_FULL; - else /* Not _necessarily_ true but EC doesn't tell all yet */ - val->intval = POWER_SUPPLY_STATUS_CHARGING; - break; - } + ret = olpc_bat_get_status(val, ec_byte); + if (ret) + return ret; + break; case POWER_SUPPLY_PROP_PRESENT: val->intval = !!(ec_byte & BAT_STAT_PRESENT); break; @@ -140,72 +236,21 @@ static int olpc_bat_get_property(struct power_supply *psy, if (ec_byte & BAT_STAT_DESTROY) val->intval = POWER_SUPPLY_HEALTH_DEAD; else { - ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1); + ret = olpc_bat_get_health(val); if (ret) return ret; - - switch (ec_byte) { - case 0: - val->intval = POWER_SUPPLY_HEALTH_GOOD; - break; - - case BAT_ERR_OVERTEMP: - val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; - break; - - case BAT_ERR_OVERVOLTAGE: - val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; - break; - - case BAT_ERR_INFOFAIL: - case BAT_ERR_OUT_OF_CONTROL: - case BAT_ERR_ID_FAIL: - case BAT_ERR_ACR_FAIL: - val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; - break; - - default: - /* Eep. We don't know this failure code */ - return -EIO; - } } break; case POWER_SUPPLY_PROP_MANUFACTURER: - ec_byte = BAT_ADDR_MFR_TYPE; - ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + ret = olpc_bat_get_mfr(val); if (ret) return ret; - - switch (ec_byte >> 4) { - case 1: - val->strval = "Gold Peak"; - break; - case 2: - val->strval = "BYD"; - break; - default: - val->strval = "Unknown"; - break; - } break; case POWER_SUPPLY_PROP_TECHNOLOGY: - ec_byte = BAT_ADDR_MFR_TYPE; - ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + ret = olpc_bat_get_tech(val); if (ret) return ret; - - switch (ec_byte & 0xf) { - case 1: - val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH; - break; - case 2: - val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe; - break; - default: - val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; - break; - } break; case POWER_SUPPLY_PROP_VOLTAGE_AVG: ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2); -- cgit v1.2.3 From 484d6d50cca3941db6e063113d124333aed0abc0 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 2 May 2008 13:41:59 -0700 Subject: power_supply: bump EC version check that we refuse to run with in olpc_battery Refuse to run with an EC < 0x44. We're playing it safe, and this is a pretty old EC version. Also, add a comment about why we're checking the EC version. Signed-off-by: Andres Salomon Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index d5fe6f0c9de0..c8b596a7fc94 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -389,8 +389,14 @@ static int __init olpc_bat_init(void) if (!olpc_platform_info.ecver) return -ENXIO; - if (olpc_platform_info.ecver < 0x43) { - printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver); + + /* + * We've seen a number of EC protocol changes; this driver requires + * the latest EC protocol, supported by 0x44 and above. + */ + if (olpc_platform_info.ecver < 0x44) { + printk(KERN_NOTICE "OLPC EC version 0x%02x too old for " + "battery driver.\n", olpc_platform_info.ecver); return -ENXIO; } -- cgit v1.2.3 From 8e552c36d90c03d2cabf5373788998966751b609 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Mon, 12 May 2008 21:46:29 -0400 Subject: power_supply: add CHARGE_COUNTER property and olpc_battery support for it This adds PROP_CHARGE_COUNTER to the power supply class (documenting it as well). The OLPC battery driver uses this for spitting out its ACR values (in uAh). We have some rounding errors (the data sheet claims 416.7, the math actually works out to 416.666667, so we're forced to choose between overflows or precision loss. I chose precision loss, and stuck w/ data sheet values), but I don't think anyone will care that much. Signed-off-by: Andres Salomon Signed-off-by: Anton Vorontsov --- Documentation/power/power_supply_class.txt | 4 ++++ drivers/power/olpc_battery.c | 11 ++++++++++- drivers/power/power_supply_sysfs.c | 1 + include/linux/power_supply.h | 1 + 4 files changed, 16 insertions(+), 1 deletion(-) diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index a8686e5a6857..c6cd4956047c 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -101,6 +101,10 @@ of charge when battery became full/empty". It also could mean "value of charge when battery considered full/empty at given conditions (temperature, age)". I.e. these attributes represents real thresholds, not design values. +CHARGE_COUNTER - the current charge counter (in µAh). This could easily +be negative; there is no empty or full value. It is only useful for +relative, time-based measurements. + ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. CAPACITY - capacity in percents. diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index c8b596a7fc94..9dd1589733c2 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -19,7 +19,7 @@ #define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */ #define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */ -#define EC_BAT_ACR 0x12 +#define EC_BAT_ACR 0x12 /* int16_t, *416.7, µAh */ #define EC_BAT_TEMP 0x13 /* uint16_t, *100/256, °C */ #define EC_AMB_TEMP 0x14 /* uint16_t, *100/256, °C */ #define EC_BAT_STATUS 0x15 /* uint8_t, bitmask */ @@ -289,6 +289,14 @@ static int olpc_bat_get_property(struct power_supply *psy, ec_word = be16_to_cpu(ec_word); val->intval = ec_word * 100 / 256; break; + case POWER_SUPPLY_PROP_CHARGE_COUNTER: + ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2); + if (ret) + return ret; + + ec_word = be16_to_cpu(ec_word); + val->intval = ec_word * 4167 / 10; + break; case POWER_SUPPLY_PROP_SERIAL_NUMBER: ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8); if (ret) @@ -317,6 +325,7 @@ static enum power_supply_property olpc_bat_props[] = { POWER_SUPPLY_PROP_TEMP_AMBIENT, POWER_SUPPLY_PROP_MANUFACTURER, POWER_SUPPLY_PROP_SERIAL_NUMBER, + POWER_SUPPLY_PROP_CHARGE_COUNTER, }; /* EEPROM reading goes completely around the power_supply API, sadly */ diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index c444d6b10c58..82e1246eeb0a 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -99,6 +99,7 @@ static struct device_attribute power_supply_attrs[] = { POWER_SUPPLY_ATTR(charge_empty), POWER_SUPPLY_ATTR(charge_now), POWER_SUPPLY_ATTR(charge_avg), + POWER_SUPPLY_ATTR(charge_counter), POWER_SUPPLY_ATTR(energy_full_design), POWER_SUPPLY_ATTR(energy_empty_design), POWER_SUPPLY_ATTR(energy_full), diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 68ed19ccf1f7..ea96ead1d39d 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -78,6 +78,7 @@ enum power_supply_property { POWER_SUPPLY_PROP_CHARGE_EMPTY, POWER_SUPPLY_PROP_CHARGE_NOW, POWER_SUPPLY_PROP_CHARGE_AVG, + POWER_SUPPLY_PROP_CHARGE_COUNTER, POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN, POWER_SUPPLY_PROP_ENERGY_FULL, -- cgit v1.2.3 From 75d8807962fc7529b4946e9ec92cae197be5a967 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Wed, 14 May 2008 16:20:38 -0700 Subject: power_supply: fix up CHARGE_COUNTER output to be more precise As Richard Smith pointed out, ACR * 6250 / 15 provides for less precision loss than ACR * 4167 / 10, _and_ it doesn't overflow. Switch to using that equation for CHARGE_COUNTER. Signed-off-by: Andres Salomon Cc: "Richard A. Smith" Signed-off-by: Andrew Morton Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 9dd1589733c2..32570af3c5c9 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -19,7 +19,7 @@ #define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */ #define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */ -#define EC_BAT_ACR 0x12 /* int16_t, *416.7, µAh */ +#define EC_BAT_ACR 0x12 /* int16_t, *6250/15, µAh */ #define EC_BAT_TEMP 0x13 /* uint16_t, *100/256, °C */ #define EC_AMB_TEMP 0x14 /* uint16_t, *100/256, °C */ #define EC_BAT_STATUS 0x15 /* uint8_t, bitmask */ @@ -295,7 +295,7 @@ static int olpc_bat_get_property(struct power_supply *psy, return ret; ec_word = be16_to_cpu(ec_word); - val->intval = ec_word * 4167 / 10; + val->intval = ec_word * 6250 / 15; break; case POWER_SUPPLY_PROP_SERIAL_NUMBER: ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8); -- cgit v1.2.3 From 94da1e2eff319994eefc7d04de7c911f64146e88 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:04:46 +0100 Subject: [WATCHDOG 01/57] Clean acquirewdt and check for BKL dependancies This brings the file into line with coding style. Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/acquirewdt.c | 119 ++++++++++++++++++++---------------------- 1 file changed, 58 insertions(+), 61 deletions(-) diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c index 85269c365a10..269ada2f1fc3 100644 --- a/drivers/watchdog/acquirewdt.c +++ b/drivers/watchdog/acquirewdt.c @@ -58,39 +58,46 @@ #include /* For standard types (like size_t) */ #include /* For the -ENODEV/... values */ #include /* For printk/panic/... */ -#include /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */ +#include /* For MODULE_ALIAS_MISCDEV + (WATCHDOG_MINOR) */ #include /* For the watchdog specific items */ #include /* For file operations */ #include /* For io-port access */ #include /* For platform_driver framework */ #include /* For __init/__exit/... */ -#include /* For copy_to_user/put_user/... */ -#include /* For inb/outb/... */ +#include /* For copy_to_user/put_user/... */ +#include /* For inb/outb/... */ /* Module information */ #define DRV_NAME "acquirewdt" #define PFX DRV_NAME ": " #define WATCHDOG_NAME "Acquire WDT" -#define WATCHDOG_HEARTBEAT 0 /* There is no way to see what the correct time-out period is */ +/* There is no way to see what the correct time-out period is */ +#define WATCHDOG_HEARTBEAT 0 /* internal variables */ -static struct platform_device *acq_platform_device; /* the watchdog platform device */ +/* the watchdog platform device */ +static struct platform_device *acq_platform_device; static unsigned long acq_is_open; static char expect_close; /* module parameters */ -static int wdt_stop = 0x43; /* You must set this - there is no sane way to probe for this board. */ +/* You must set this - there is no sane way to probe for this board. */ +static int wdt_stop = 0x43; module_param(wdt_stop, int, 0); MODULE_PARM_DESC(wdt_stop, "Acquire WDT 'stop' io port (default 0x43)"); -static int wdt_start = 0x443; /* You must set this - there is no sane way to probe for this board. */ +/* You must set this - there is no sane way to probe for this board. */ +static int wdt_start = 0x443; module_param(wdt_start, int, 0); MODULE_PARM_DESC(wdt_start, "Acquire WDT 'start' io port (default 0x443)"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Watchdog Operations @@ -112,18 +119,18 @@ static void acq_stop(void) * /dev/watchdog handling */ -static ssize_t acq_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t acq_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ - if(count) { + if (count) { if (!nowayout) { size_t i; - /* note: just in case someone wrote the magic character * five months ago... */ expect_close = 0; - - /* scan to see whether or not we got the magic character */ + /* scan to see whether or not we got the + magic character */ for (i = 0; i != count; i++) { char c; if (get_user(c, buf + i)) @@ -132,64 +139,55 @@ static ssize_t acq_write(struct file *file, const char __user *buf, size_t count expect_close = 42; } } - - /* Well, anyhow someone wrote to us, we should return that favour */ + /* Well, anyhow someone wrote to us, we should + return that favour */ acq_keepalive(); } return count; } -static int acq_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long acq_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { int options, retval = -EINVAL; void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident = - { + static struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = WATCHDOG_NAME, }; - switch(cmd) - { + switch (cmd) { case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - return put_user(0, p); + return put_user(0, p); case WDIOC_KEEPALIVE: - acq_keepalive(); - return 0; + acq_keepalive(); + return 0; case WDIOC_GETTIMEOUT: return put_user(WATCHDOG_HEARTBEAT, p); case WDIOC_SETOPTIONS: { - if (get_user(options, p)) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) - { - acq_stop(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) - { - acq_keepalive(); - retval = 0; - } - - return retval; + if (get_user(options, p)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + acq_stop(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + acq_keepalive(); + retval = 0; + } + return retval; } - default: - return -ENOTTY; + return -ENOTTY; } } @@ -211,7 +209,8 @@ static int acq_close(struct inode *inode, struct file *file) if (expect_close == 42) { acq_stop(); } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); acq_keepalive(); } clear_bit(0, &acq_is_open); @@ -227,7 +226,7 @@ static const struct file_operations acq_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = acq_write, - .ioctl = acq_ioctl, + .unlocked_ioctl = acq_ioctl, .open = acq_open, .release = acq_close, }; @@ -248,32 +247,29 @@ static int __devinit acq_probe(struct platform_device *dev) if (wdt_stop != wdt_start) { if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_stop); + printk(KERN_ERR PFX + "I/O address 0x%04x already in use\n", wdt_stop); ret = -EIO; goto out; } } if (!request_region(wdt_start, 1, WATCHDOG_NAME)) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", + printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", wdt_start); ret = -EIO; goto unreg_stop; } - ret = misc_register(&acq_miscdev); if (ret != 0) { - printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_regions; } - - printk (KERN_INFO PFX "initialized. (nowayout=%d)\n", - nowayout); + printk(KERN_INFO PFX "initialized. (nowayout=%d)\n", nowayout); return 0; - unreg_regions: release_region(wdt_start, 1); unreg_stop: @@ -286,9 +282,9 @@ out: static int __devexit acq_remove(struct platform_device *dev) { misc_deregister(&acq_miscdev); - release_region(wdt_start,1); - if(wdt_stop != wdt_start) - release_region(wdt_stop,1); + release_region(wdt_start, 1); + if (wdt_stop != wdt_start) + release_region(wdt_stop, 1); return 0; } @@ -313,18 +309,19 @@ static int __init acq_init(void) { int err; - printk(KERN_INFO "WDT driver for Acquire single board computer initialising.\n"); + printk(KERN_INFO + "WDT driver for Acquire single board computer initialising.\n"); err = platform_driver_register(&acquirewdt_driver); if (err) return err; - acq_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0); + acq_platform_device = platform_device_register_simple(DRV_NAME, + -1, NULL, 0); if (IS_ERR(acq_platform_device)) { err = PTR_ERR(acq_platform_device); goto unreg_platform_driver; } - return 0; unreg_platform_driver: -- cgit v1.2.3 From b6b4d9b8d07e34f745871d3109c84894db29041b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:04:51 +0100 Subject: [WATCHDOG 02/57] clean up and check advantech watchdog Clean up the advantech watchdog code and inspect for BKL problems Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/advantechwdt.c | 135 ++++++++++++++++++---------------------- 1 file changed, 62 insertions(+), 73 deletions(-) diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c index 8121cc247343..220d238ee427 100644 --- a/drivers/watchdog/advantechwdt.c +++ b/drivers/watchdog/advantechwdt.c @@ -72,35 +72,35 @@ MODULE_PARM_DESC(wdt_start, "Advantech WDT 'start' io port (default 0x443)"); static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=63, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1<= timeout <=63, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) "."); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Watchdog Operations */ -static void -advwdt_ping(void) +static void advwdt_ping(void) { /* Write a watchdog value */ outb_p(timeout, wdt_start); } -static void -advwdt_disable(void) +static void advwdt_disable(void) { inb_p(wdt_stop); } -static int -advwdt_set_heartbeat(int t) +static int advwdt_set_heartbeat(int t) { - if ((t < 1) || (t > 63)) + if (t < 1 || t > 63) return -EINVAL; - timeout = t; return 0; } @@ -109,8 +109,8 @@ advwdt_set_heartbeat(int t) * /dev/watchdog handling */ -static ssize_t -advwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t advwdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { if (count) { if (!nowayout) { @@ -131,9 +131,7 @@ advwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *pp return count; } -static int -advwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { int new_timeout; void __user *argp = (void __user *)arg; @@ -146,57 +144,50 @@ advwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof(ident))) - return -EFAULT; - break; + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - return put_user(0, p); + return put_user(0, p); case WDIOC_KEEPALIVE: - advwdt_ping(); - break; + advwdt_ping(); + break; case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - if (advwdt_set_heartbeat(new_timeout)) - return -EINVAL; - advwdt_ping(); - /* Fall */ - + if (get_user(new_timeout, p)) + return -EFAULT; + if (advwdt_set_heartbeat(new_timeout)) + return -EINVAL; + advwdt_ping(); + /* Fall */ case WDIOC_GETTIMEOUT: - return put_user(timeout, p); - + return put_user(timeout, p); case WDIOC_SETOPTIONS: { - int options, retval = -EINVAL; - - if (get_user(options, p)) - return -EFAULT; + int options, retval = -EINVAL; - if (options & WDIOS_DISABLECARD) { - advwdt_disable(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) { - advwdt_ping(); - retval = 0; - } - - return retval; + if (get_user(options, p)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + advwdt_disable(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + advwdt_ping(); + retval = 0; + } + return retval; } - default: - return -ENOTTY; + return -ENOTTY; } return 0; } -static int -advwdt_open(struct inode *inode, struct file *file) +static int advwdt_open(struct inode *inode, struct file *file) { if (test_and_set_bit(0, &advwdt_is_open)) return -EBUSY; @@ -214,7 +205,8 @@ advwdt_close(struct inode *inode, struct file *file) if (adv_expect_close == 42) { advwdt_disable(); } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); advwdt_ping(); } clear_bit(0, &advwdt_is_open); @@ -230,7 +222,7 @@ static const struct file_operations advwdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = advwdt_write, - .ioctl = advwdt_ioctl, + .unlocked_ioctl = advwdt_ioctl, .open = advwdt_open, .release = advwdt_close, }; @@ -245,23 +237,24 @@ static struct miscdevice advwdt_miscdev = { * Init & exit routines */ -static int __devinit -advwdt_probe(struct platform_device *dev) +static int __devinit advwdt_probe(struct platform_device *dev) { int ret; if (wdt_stop != wdt_start) { if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_stop); + printk(KERN_ERR PFX + "I/O address 0x%04x already in use\n", + wdt_stop); ret = -EIO; goto out; } } if (!request_region(wdt_start, 1, WATCHDOG_NAME)) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_start); + printk(KERN_ERR PFX + "I/O address 0x%04x already in use\n", + wdt_start); ret = -EIO; goto unreg_stop; } @@ -269,20 +262,19 @@ advwdt_probe(struct platform_device *dev) /* Check that the heartbeat value is within it's range ; if not reset to the default */ if (advwdt_set_heartbeat(timeout)) { advwdt_set_heartbeat(WATCHDOG_TIMEOUT); - printk (KERN_INFO PFX "timeout value must be 1<=x<=63, using %d\n", - timeout); + printk(KERN_INFO PFX + "timeout value must be 1<=x<=63, using %d\n", timeout); } ret = misc_register(&advwdt_miscdev); if (ret != 0) { - printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_regions; } - - printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", + printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); - out: return ret; unreg_regions: @@ -293,8 +285,7 @@ unreg_stop: goto out; } -static int __devexit -advwdt_remove(struct platform_device *dev) +static int __devexit advwdt_remove(struct platform_device *dev) { misc_deregister(&advwdt_miscdev); release_region(wdt_start,1); @@ -304,8 +295,7 @@ advwdt_remove(struct platform_device *dev) return 0; } -static void -advwdt_shutdown(struct platform_device *dev) +static void advwdt_shutdown(struct platform_device *dev) { /* Turn the WDT off if we have a soft shutdown */ advwdt_disable(); @@ -321,8 +311,7 @@ static struct platform_driver advwdt_driver = { }, }; -static int __init -advwdt_init(void) +static int __init advwdt_init(void) { int err; @@ -332,7 +321,8 @@ advwdt_init(void) if (err) return err; - advwdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0); + advwdt_platform_device = platform_device_register_simple(DRV_NAME, + -1, NULL, 0); if (IS_ERR(advwdt_platform_device)) { err = PTR_ERR(advwdt_platform_device); goto unreg_platform_driver; @@ -345,8 +335,7 @@ unreg_platform_driver: return err; } -static void __exit -advwdt_exit(void) +static void __exit advwdt_exit(void) { platform_device_unregister(advwdt_platform_device); platform_driver_unregister(&advwdt_driver); -- cgit v1.2.3 From 173d95bc2e68baf73eb89fb9ef1cc63a66f581a5 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:04:57 +0100 Subject: [WATCHDOG 03/57] ali: watchdog locking and style Clean up and check locking Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/alim1535_wdt.c | 186 ++++++++++++++++----------------- drivers/watchdog/alim7101_wdt.c | 224 +++++++++++++++++++++------------------- 2 files changed, 209 insertions(+), 201 deletions(-) diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c index 2b1fbdb2fcf7..88760cb5ec13 100644 --- a/drivers/watchdog/alim1535_wdt.c +++ b/drivers/watchdog/alim1535_wdt.c @@ -19,8 +19,8 @@ #include #include -#include -#include +#include +#include #define WATCHDOG_NAME "ALi_M1535" #define PFX WATCHDOG_NAME ": " @@ -30,17 +30,21 @@ static unsigned long ali_is_open; static char ali_expect_release; static struct pci_dev *ali_pci; -static u32 ali_timeout_bits; /* stores the computed timeout */ +static u32 ali_timeout_bits; /* stores the computed timeout */ static DEFINE_SPINLOCK(ali_lock); /* Guards the hardware */ /* module parameters */ static int timeout = WATCHDOG_TIMEOUT; module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (0= 18000) { timeout = WATCHDOG_TIMEOUT; - printk(KERN_INFO PFX "timeout value must be 0 #include -#include -#include +#include +#include #include #define OUR_NAME "alim7101_wdt" @@ -60,13 +60,17 @@ */ #define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ -static int timeout = WATCHDOG_TIMEOUT; /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +static int timeout = WATCHDOG_TIMEOUT; module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1<=timeout<=3600, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -static int use_gpio = 0; /* Use the pic (for a1d revision alim7101) */ +static int use_gpio; /* Use the pic (for a1d revision alim7101) */ module_param(use_gpio, int, 0); -MODULE_PARM_DESC(use_gpio, "Use the gpio watchdog. (required by old cobalt boards)"); +MODULE_PARM_DESC(use_gpio, + "Use the gpio watchdog (required by old cobalt boards)."); static void wdt_timer_ping(unsigned long); static DEFINE_TIMER(timer, wdt_timer_ping, 0, 1); @@ -77,8 +81,9 @@ static struct pci_dev *alim7101_pmu; static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Whack the dog @@ -89,23 +94,26 @@ static void wdt_timer_ping(unsigned long data) /* If we got a heartbeat pulse within the WDT_US_INTERVAL * we agree to ping the WDT */ - char tmp; + char tmp; - if(time_before(jiffies, next_heartbeat)) - { + if (time_before(jiffies, next_heartbeat)) { /* Ping the WDT (this is actually a disarm/arm sequence) */ pci_read_config_byte(alim7101_pmu, 0x92, &tmp); - pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp & ~ALI_WDT_ARM)); - pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp | ALI_WDT_ARM)); + pci_write_config_byte(alim7101_pmu, + ALI_7101_WDT, (tmp & ~ALI_WDT_ARM)); + pci_write_config_byte(alim7101_pmu, + ALI_7101_WDT, (tmp | ALI_WDT_ARM)); if (use_gpio) { - pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp); - pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp - | 0x20); - pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp - & ~0x20); + pci_read_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, &tmp); + pci_write_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, tmp | 0x20); + pci_write_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, tmp & ~0x20); } } else { - printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); + printk(KERN_WARNING PFX + "Heartbeat lost! Will not ping the watchdog\n"); } /* Re-set the timer interval */ mod_timer(&timer, jiffies + WDT_INTERVAL); @@ -121,17 +129,23 @@ static void wdt_change(int writeval) pci_read_config_byte(alim7101_pmu, ALI_7101_WDT, &tmp); if (writeval == WDT_ENABLE) { - pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp | ALI_WDT_ARM)); + pci_write_config_byte(alim7101_pmu, + ALI_7101_WDT, (tmp | ALI_WDT_ARM)); if (use_gpio) { - pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp); - pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp & ~0x20); + pci_read_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, &tmp); + pci_write_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, tmp & ~0x20); } } else { - pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp & ~ALI_WDT_ARM)); + pci_write_config_byte(alim7101_pmu, + ALI_7101_WDT, (tmp & ~ALI_WDT_ARM)); if (use_gpio) { - pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp); - pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp | 0x20); + pci_read_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, &tmp); + pci_write_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, tmp | 0x20); } } } @@ -169,10 +183,11 @@ static void wdt_keepalive(void) * /dev/watchdog handling */ -static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos) +static ssize_t fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ - if(count) { + if (count) { if (!nowayout) { size_t ofs; @@ -195,119 +210,116 @@ static ssize_t fop_write(struct file * file, const char __user * buf, size_t cou return count; } -static int fop_open(struct inode * inode, struct file * file) +static int fop_open(struct inode *inode, struct file *file) { /* Just in case we're already talking to someone... */ - if(test_and_set_bit(0, &wdt_is_open)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; /* Good, fire up the show */ wdt_startup(); return nonseekable_open(inode, file); } -static int fop_close(struct inode * inode, struct file * file) +static int fop_close(struct inode *inode, struct file *file) { - if(wdt_expect_close == 42) + if (wdt_expect_close == 42) wdt_turnoff(); else { /* wim: shouldn't there be a: del_timer(&timer); */ - printk(KERN_CRIT PFX "device file closed unexpectedly. Will not stop the WDT!\n"); + printk(KERN_CRIT PFX + "device file closed unexpectedly. Will not stop the WDT!\n"); } clear_bit(0, &wdt_is_open); wdt_expect_close = 0; return 0; } -static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident = - { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "ALiM7101", }; - switch(cmd) + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETOPTIONS: { - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; - case WDIOC_SETOPTIONS: - { - int new_options, retval = -EINVAL; - - if(get_user(new_options, p)) - return -EFAULT; - - if(new_options & WDIOS_DISABLECARD) { - wdt_turnoff(); - retval = 0; - } - - if(new_options & WDIOS_ENABLECARD) { - wdt_startup(); - retval = 0; - } + int new_options, retval = -EINVAL; - return retval; + if (get_user(new_options, p)) + return -EFAULT; + if (new_options & WDIOS_DISABLECARD) { + wdt_turnoff(); + retval = 0; } - case WDIOC_SETTIMEOUT: - { - int new_timeout; - - if(get_user(new_timeout, p)) - return -EFAULT; - - if(new_timeout < 1 || new_timeout > 3600) /* arbitrary upper limit */ - return -EINVAL; - - timeout = new_timeout; - wdt_keepalive(); - /* Fall through */ + if (new_options & WDIOS_ENABLECARD) { + wdt_startup(); + retval = 0; } - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); - default: - return -ENOTTY; + return retval; + } + case WDIOC_SETTIMEOUT: + { + int new_timeout; + + if (get_user(new_timeout, p)) + return -EFAULT; + /* arbitrary upper limit */ + if (new_timeout < 1 || new_timeout > 3600) + return -EINVAL; + timeout = new_timeout; + wdt_keepalive(); + /* Fall through */ + } + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: + return -ENOTTY; } } static const struct file_operations wdt_fops = { - .owner= THIS_MODULE, - .llseek= no_llseek, - .write= fop_write, - .open= fop_open, - .release= fop_close, - .ioctl= fop_ioctl, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = fop_write, + .open = fop_open, + .release = fop_close, + .unlocked_ioctl = fop_ioctl, }; static struct miscdevice wdt_miscdev = { - .minor=WATCHDOG_MINOR, - .name="watchdog", - .fops=&wdt_fops, + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, }; /* * Notifier for system down */ -static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) +static int wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) { - if (code==SYS_DOWN || code==SYS_HALT) + if (code == SYS_DOWN || code == SYS_HALT) wdt_turnoff(); - if (code==SYS_RESTART) { + if (code == SYS_RESTART) { /* - * Cobalt devices have no way of rebooting themselves other than - * getting the watchdog to pull reset, so we restart the watchdog on - * reboot with no heartbeat + * Cobalt devices have no way of rebooting themselves other + * than getting the watchdog to pull reset, so we restart the + * watchdog on reboot with no heartbeat */ wdt_change(WDT_ENABLE); printk(KERN_INFO PFX "Watchdog timer is now enabled with no heartbeat - should reboot in ~1 second.\n"); @@ -320,8 +332,7 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void * turn the timebomb registers off. */ -static struct notifier_block wdt_notifier= -{ +static struct notifier_block wdt_notifier = { .notifier_call = wdt_notify_sys, }; @@ -354,7 +365,8 @@ static int __init alim7101_wdt_init(void) ali1543_south = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); if (!ali1543_south) { - printk(KERN_INFO PFX "ALi 1543 South-Bridge not present - WDT not set\n"); + printk(KERN_INFO PFX + "ALi 1543 South-Bridge not present - WDT not set\n"); goto err_out; } pci_read_config_byte(ali1543_south, 0x5e, &tmp); @@ -363,24 +375,25 @@ static int __init alim7101_wdt_init(void) if (!use_gpio) { printk(KERN_INFO PFX "Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter.\n"); goto err_out; - } + } nowayout = 1; } else if ((tmp & 0x1e) != 0x12 && (tmp & 0x1e) != 0x00) { printk(KERN_INFO PFX "ALi 1543 South-Bridge does not have the correct revision number (???1001?) - WDT not set\n"); goto err_out; } - if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */ - { + if (timeout < 1 || timeout > 3600) { + /* arbitrary upper limit */ timeout = WATCHDOG_TIMEOUT; - printk(KERN_INFO PFX "timeout value must be 1<=x<=3600, using %d\n", - timeout); + printk(KERN_INFO PFX + "timeout value must be 1 <= x <= 3600, using %d\n", + timeout); } rc = register_reboot_notifier(&wdt_notifier); if (rc) { - printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - rc); + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", rc); goto err_out; } @@ -391,9 +404,8 @@ static int __init alim7101_wdt_init(void) goto err_out_reboot; } - if (nowayout) { + if (nowayout) __module_get(THIS_MODULE); - } printk(KERN_INFO PFX "WDT driver for ALi M7101 initialised. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); -- cgit v1.2.3 From fbd4714907cd54ba74b8d35228813a060ae0176a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:07 +0100 Subject: [WATCHDOG 04/57] AR7 watchdog Fix locking Use unlocked_ioctl Remove semaphores Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ar7_wdt.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c index 2eb48c0df32c..ef7b0d67095e 100644 --- a/drivers/watchdog/ar7_wdt.c +++ b/drivers/watchdog/ar7_wdt.c @@ -69,7 +69,8 @@ struct ar7_wdt { u32 prescale; }; -static struct semaphore open_semaphore; +static unsigned long wdt_is_open; +static spinlock_t wdt_lock; static unsigned expect_close; /* XXX currently fixed, allows max margin ~68.72 secs */ @@ -154,8 +155,10 @@ static void ar7_wdt_update_margin(int new_margin) u32 change; change = new_margin * (ar7_vbus_freq() / prescale_value); - if (change < 1) change = 1; - if (change > 0xffff) change = 0xffff; + if (change < 1) + change = 1; + if (change > 0xffff) + change = 0xffff; ar7_wdt_change(change); margin = change * prescale_value / ar7_vbus_freq(); printk(KERN_INFO DRVNAME @@ -179,7 +182,7 @@ static void ar7_wdt_disable_wdt(void) static int ar7_wdt_open(struct inode *inode, struct file *file) { /* only allow one at a time */ - if (down_trylock(&open_semaphore)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; ar7_wdt_enable_wdt(); expect_close = 0; @@ -195,9 +198,7 @@ static int ar7_wdt_release(struct inode *inode, struct file *file) "will not disable the watchdog timer\n"); else if (!nowayout) ar7_wdt_disable_wdt(); - - up(&open_semaphore); - + clear_bit(0, &wdt_is_open); return 0; } @@ -222,7 +223,9 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data, if (len) { size_t i; + spin_lock(&wdt_lock); ar7_wdt_kick(1); + spin_unlock(&wdt_lock); expect_close = 0; for (i = 0; i < len; ++i) { @@ -237,8 +240,8 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data, return len; } -static int ar7_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ar7_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { static struct watchdog_info ident = { .identity = LONGNAME, @@ -269,8 +272,10 @@ static int ar7_wdt_ioctl(struct inode *inode, struct file *file, if (new_margin < 1) return -EINVAL; + spin_lock(&wdt_lock); ar7_wdt_update_margin(new_margin); ar7_wdt_kick(1); + spin_unlock(&wdt_lock); case WDIOC_GETTIMEOUT: if (put_user(margin, (int *)arg)) @@ -282,7 +287,7 @@ static int ar7_wdt_ioctl(struct inode *inode, struct file *file, static const struct file_operations ar7_wdt_fops = { .owner = THIS_MODULE, .write = ar7_wdt_write, - .ioctl = ar7_wdt_ioctl, + .unlocked_ioctl = ar7_wdt_ioctl, .open = ar7_wdt_open, .release = ar7_wdt_release, }; @@ -297,6 +302,8 @@ static int __init ar7_wdt_init(void) { int rc; + spin_lock_init(&wdt_lock); + ar7_wdt_get_regs(); if (!request_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt), @@ -312,8 +319,6 @@ static int __init ar7_wdt_init(void) ar7_wdt_prescale(prescale_value); ar7_wdt_update_margin(margin); - sema_init(&open_semaphore, 1); - rc = register_reboot_notifier(&ar7_wdt_notifier); if (rc) { printk(KERN_ERR DRVNAME -- cgit v1.2.3 From a6be8e5ff95e12190fd5e5158eb553255677292f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:13 +0100 Subject: [WATCHDOG 05/57] atp watchdog Switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/at32ap700x_wdt.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c index ae0fca5e8749..c5dc5e912fb2 100644 --- a/drivers/watchdog/at32ap700x_wdt.c +++ b/drivers/watchdog/at32ap700x_wdt.c @@ -212,8 +212,8 @@ static struct watchdog_info at32_wdt_info = { /* * Handle commands from user-space. */ -static int at32_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long at32_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { int ret = -ENOTTY; int time; @@ -298,7 +298,7 @@ static ssize_t at32_wdt_write(struct file *file, const char __user *data, static const struct file_operations at32_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .ioctl = at32_wdt_ioctl, + .unlocked_ioctl = at32_wdt_ioctl, .open = at32_wdt_open, .release = at32_wdt_close, .write = at32_wdt_write, @@ -391,7 +391,6 @@ static int __exit at32_wdt_remove(struct platform_device *pdev) wdt = NULL; platform_set_drvdata(pdev, NULL); } - return 0; } -- cgit v1.2.3 From 2760600da2a13d5a2a335ba012d0f3ad5df4c098 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:19 +0100 Subject: [WATCHDOG 06/57] at91: watchdog to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/at91rm9200_wdt.c | 108 +++++++++++++++++++------------------- 1 file changed, 54 insertions(+), 54 deletions(-) diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index 9ff9a9565320..bb79f649dc7e 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include @@ -31,11 +31,14 @@ static int wdt_time = WDT_DEFAULT_TIME; static int nowayout = WATCHDOG_NOWAYOUT; module_param(wdt_time, int, 0); -MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="__MODULE_STRING(WDT_DEFAULT_TIME) ")"); +MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" + __MODULE_STRING(WDT_DEFAULT_TIME) ")"); #ifdef CONFIG_WATCHDOG_NOWAYOUT module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); #endif @@ -46,7 +49,7 @@ static unsigned long at91wdt_busy; /* * Disable the watchdog. */ -static void inline at91_wdt_stop(void) +static inline void at91_wdt_stop(void) { at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN); } @@ -54,16 +57,17 @@ static void inline at91_wdt_stop(void) /* * Enable and reset the watchdog. */ -static void inline at91_wdt_start(void) +static inline void at91_wdt_start(void) { - at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN | (((65536 * wdt_time) >> 8) & AT91_ST_WDV)); + at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN | + (((65536 * wdt_time) >> 8) & AT91_ST_WDV)); at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } /* * Reload the watchdog timer. (ie, pat the watchdog) */ -static void inline at91_wdt_reload(void) +static inline void at91_wdt_reload(void) { at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } @@ -89,8 +93,9 @@ static int at91_wdt_open(struct inode *inode, struct file *file) */ static int at91_wdt_close(struct inode *inode, struct file *file) { + /* Disable the watchdog when file is closed */ if (!nowayout) - at91_wdt_stop(); /* Disable the watchdog when file is closed */ + at91_wdt_stop(); clear_bit(0, &at91wdt_busy); return 0; @@ -110,7 +115,8 @@ static int at91_wdt_settimeout(int new_time) if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) return -EINVAL; - /* Set new watchdog time. It will be used when at91_wdt_start() is called. */ + /* Set new watchdog time. It will be used when + at91_wdt_start() is called. */ wdt_time = new_time; return 0; } @@ -123,60 +129,52 @@ static struct watchdog_info at91_wdt_info = { /* * Handle commands from user-space. */ -static int at91_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long at91_wdt_ioct(struct file *file, + unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; int new_value; - switch(cmd) { - case WDIOC_KEEPALIVE: - at91_wdt_reload(); /* pat the watchdog */ - return 0; - - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &at91_wdt_info, sizeof(at91_wdt_info)) ? -EFAULT : 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_value, p)) - return -EFAULT; - - if (at91_wdt_settimeout(new_value)) - return -EINVAL; - - /* Enable new time value */ + switch (cmd) { + case WDIOC_KEEPALIVE: + at91_wdt_reload(); /* pat the watchdog */ + return 0; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &at91_wdt_info, + sizeof(at91_wdt_info)) ? -EFAULT : 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + if (at91_wdt_settimeout(new_value)) + return -EINVAL; + /* Enable new time value */ + at91_wdt_start(); + /* Return current value */ + return put_user(wdt_time, p); + case WDIOC_GETTIMEOUT: + return put_user(wdt_time, p); + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_SETOPTIONS: + if (get_user(new_value, p)) + return -EFAULT; + if (new_value & WDIOS_DISABLECARD) + at91_wdt_stop(); + if (new_value & WDIOS_ENABLECARD) at91_wdt_start(); - - /* Return current value */ - return put_user(wdt_time, p); - - case WDIOC_GETTIMEOUT: - return put_user(wdt_time, p); - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_SETOPTIONS: - if (get_user(new_value, p)) - return -EFAULT; - - if (new_value & WDIOS_DISABLECARD) - at91_wdt_stop(); - if (new_value & WDIOS_ENABLECARD) - at91_wdt_start(); - return 0; - - default: - return -ENOTTY; + return 0; + default: + return -ENOTTY; } } /* * Pat the watchdog whenever device is written to. */ -static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) +static ssize_t at91_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { at91_wdt_reload(); /* pat the watchdog */ return len; @@ -187,7 +185,7 @@ static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, l static const struct file_operations at91wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .ioctl = at91_wdt_ioctl, + .unlocked_ioctl = at91_wdt_ioctl, .open = at91_wdt_open, .release = at91_wdt_close, .write = at91_wdt_write, @@ -211,7 +209,8 @@ static int __init at91wdt_probe(struct platform_device *pdev) if (res) return res; - printk("AT91 Watchdog Timer enabled (%d seconds%s)\n", wdt_time, nowayout ? ", nowayout" : ""); + printk(KERN_INFO "AT91 Watchdog Timer enabled (%d seconds%s)\n", + wdt_time, nowayout ? ", nowayout" : ""); return 0; } @@ -265,7 +264,8 @@ static struct platform_driver at91wdt_driver = { static int __init at91_wdt_init(void) { - /* Check that the heartbeat value is within range; if not reset to the default */ + /* Check that the heartbeat value is within range; + if not reset to the default */ if (at91_wdt_settimeout(wdt_time)) { at91_wdt_settimeout(WDT_DEFAULT_TIME); pr_info("at91_wdt: wdt_time value must be 1 <= wdt_time <= 256, using %d\n", wdt_time); -- cgit v1.2.3 From 6f932f18de7f0e22a1bdae5d0040eb5d8e4a6777 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:24 +0100 Subject: [WATCHDOG 07/57] cpu5_wdt: switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/cpu5wdt.c | 144 ++++++++++++++++++++++----------------------- 1 file changed, 70 insertions(+), 74 deletions(-) diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c index df72f90123df..ec324e5e1c99 100644 --- a/drivers/watchdog/cpu5wdt.c +++ b/drivers/watchdog/cpu5wdt.c @@ -30,16 +30,16 @@ #include #include #include -#include -#include - +#include +#include #include /* adjustable parameters */ -static int verbose = 0; +static int verbose; static int port = 0x91; static int ticks = 10000; +static spinlock_t cpu5wdt_lock; #define PFX "cpu5wdt: " @@ -70,12 +70,13 @@ static struct { static void cpu5wdt_trigger(unsigned long unused) { - if ( verbose > 2 ) + if (verbose > 2) printk(KERN_DEBUG PFX "trigger at %i ticks\n", ticks); - if( cpu5wdt_device.running ) + if (cpu5wdt_device.running) ticks--; + spin_lock(&cpu5wdt_lock); /* keep watchdog alive */ outb(1, port + CPU5WDT_TRIGGER_REG); @@ -86,6 +87,7 @@ static void cpu5wdt_trigger(unsigned long unused) /* ticks doesn't matter anyway */ complete(&cpu5wdt_device.stop); } + spin_unlock(&cpu5wdt_lock); } @@ -93,14 +95,17 @@ static void cpu5wdt_reset(void) { ticks = cpu5wdt_device.default_ticks; - if ( verbose ) + if (verbose) printk(KERN_DEBUG PFX "reset (%i ticks)\n", (int) ticks); } static void cpu5wdt_start(void) { - if ( !cpu5wdt_device.queue ) { + unsigned long flags; + + spin_lock_irqsave(&cpu5wdt_lock, flags); + if (!cpu5wdt_device.queue) { cpu5wdt_device.queue = 1; outb(0, port + CPU5WDT_TIME_A_REG); outb(0, port + CPU5WDT_TIME_B_REG); @@ -111,18 +116,20 @@ static void cpu5wdt_start(void) } /* if process dies, counter is not decremented */ cpu5wdt_device.running++; + spin_unlock_irqrestore(&cpu5wdt_lock, flags); } static int cpu5wdt_stop(void) { - if ( cpu5wdt_device.running ) - cpu5wdt_device.running = 0; + unsigned long flags; + spin_lock_irqsave(&cpu5wdt_lock, flags); + if (cpu5wdt_device.running) + cpu5wdt_device.running = 0; ticks = cpu5wdt_device.default_ticks; - - if ( verbose ) + spin_unlock_irqrestore(&cpu5wdt_lock, flags); + if (verbose) printk(KERN_CRIT PFX "stop not possible\n"); - return -EIO; } @@ -130,9 +137,8 @@ static int cpu5wdt_stop(void) static int cpu5wdt_open(struct inode *inode, struct file *file) { - if ( test_and_set_bit(0, &cpu5wdt_device.inuse) ) + if (test_and_set_bit(0, &cpu5wdt_device.inuse)) return -EBUSY; - return nonseekable_open(inode, file); } @@ -142,67 +148,58 @@ static int cpu5wdt_release(struct inode *inode, struct file *file) return 0; } -static int cpu5wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long cpu5wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; + int __user *p = argp; unsigned int value; - static struct watchdog_info ident = - { + static struct watchdog_info ident = { .options = WDIOF_CARDRESET, .identity = "CPU5 WDT", }; - switch(cmd) { - case WDIOC_KEEPALIVE: - cpu5wdt_reset(); - break; - case WDIOC_GETSTATUS: - value = inb(port + CPU5WDT_STATUS_REG); - value = (value >> 2) & 1; - if ( copy_to_user(argp, &value, sizeof(int)) ) - return -EFAULT; - break; - case WDIOC_GETBOOTSTATUS: - if ( copy_to_user(argp, &value, sizeof(int)) ) - return -EFAULT; - break; - case WDIOC_GETSUPPORT: - if ( copy_to_user(argp, &ident, sizeof(ident)) ) - return -EFAULT; - break; - case WDIOC_SETOPTIONS: - if ( copy_from_user(&value, argp, sizeof(int)) ) - return -EFAULT; - switch(value) { - case WDIOS_ENABLECARD: - cpu5wdt_start(); - break; - case WDIOS_DISABLECARD: - return cpu5wdt_stop(); - default: - return -EINVAL; - } - break; - default: - return -ENOTTY; + switch (cmd) { + case WDIOC_KEEPALIVE: + cpu5wdt_reset(); + break; + case WDIOC_GETSTATUS: + value = inb(port + CPU5WDT_STATUS_REG); + value = (value >> 2) & 1; + return put_user(value, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + case WDIOC_SETOPTIONS: + if (get_user(value, p)) + return -EFAULT; + if (value & WDIOS_ENABLECARD) + cpu5wdt_start(); + if (value & WDIOS_DISABLECARD) + cpu5wdt_stop(); + break; + default: + return -ENOTTY; } return 0; } -static ssize_t cpu5wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t cpu5wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { - if ( !count ) + if (!count) return -EIO; - cpu5wdt_reset(); - return count; } static const struct file_operations cpu5wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .ioctl = cpu5wdt_ioctl, + .unlocked_ioctl = cpu5wdt_ioctl, .open = cpu5wdt_open, .write = cpu5wdt_write, .release = cpu5wdt_release, @@ -221,37 +218,36 @@ static int __devinit cpu5wdt_init(void) unsigned int val; int err; - if ( verbose ) - printk(KERN_DEBUG PFX "port=0x%x, verbose=%i\n", port, verbose); + if (verbose) + printk(KERN_DEBUG PFX + "port=0x%x, verbose=%i\n", port, verbose); - if ( !request_region(port, CPU5WDT_EXTENT, PFX) ) { + init_completion(&cpu5wdt_device.stop); + spin_lock_init(&cpu5wdt_lock); + cpu5wdt_device.queue = 0; + setup_timer(&cpu5wdt_device.timer, cpu5wdt_trigger, 0); + cpu5wdt_device.default_ticks = ticks; + + if (!request_region(port, CPU5WDT_EXTENT, PFX)) { printk(KERN_ERR PFX "request_region failed\n"); err = -EBUSY; goto no_port; } - if ( (err = misc_register(&cpu5wdt_misc)) < 0 ) { - printk(KERN_ERR PFX "misc_register failed\n"); - goto no_misc; - } - /* watchdog reboot? */ val = inb(port + CPU5WDT_STATUS_REG); val = (val >> 2) & 1; - if ( !val ) + if (!val) printk(KERN_INFO PFX "sorry, was my fault\n"); - init_completion(&cpu5wdt_device.stop); - cpu5wdt_device.queue = 0; - - clear_bit(0, &cpu5wdt_device.inuse); - - setup_timer(&cpu5wdt_device.timer, cpu5wdt_trigger, 0); + err = misc_register(&cpu5wdt_misc); + if (err < 0) { + printk(KERN_ERR PFX "misc_register failed\n"); + goto no_misc; + } - cpu5wdt_device.default_ticks = ticks; printk(KERN_INFO PFX "init success\n"); - return 0; no_misc: @@ -267,7 +263,7 @@ static int __devinit cpu5wdt_init_module(void) static void __devexit cpu5wdt_exit(void) { - if ( cpu5wdt_device.queue ) { + if (cpu5wdt_device.queue) { cpu5wdt_device.queue = 0; wait_for_completion(&cpu5wdt_device.stop); } -- cgit v1.2.3 From f78b0a8f27618b492dd2e1a8f5e4ce6f89b3c961 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:30 +0100 Subject: [WATCHDOG 08/57] davinci_wdt: unlocked_ioctl and check locking Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/davinci_wdt.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c index 1782c79eff06..926b59c41186 100644 --- a/drivers/watchdog/davinci_wdt.c +++ b/drivers/watchdog/davinci_wdt.c @@ -22,10 +22,10 @@ #include #include #include +#include +#include #include -#include -#include #define MODULE_NAME "DAVINCI-WDT: " @@ -143,9 +143,8 @@ static struct watchdog_info ident = { .identity = "DaVinci Watchdog", }; -static int -davinci_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long davinci_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { int ret = -ENOTTY; @@ -184,7 +183,7 @@ static const struct file_operations davinci_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = davinci_wdt_write, - .ioctl = davinci_wdt_ioctl, + .unlocked_ioctl = davinci_wdt_ioctl, .open = davinci_wdt_open, .release = davinci_wdt_release, }; -- cgit v1.2.3 From f339e2ac9d65656e6d18c92b1ddc4a7801373318 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:35 +0100 Subject: [WATCHDOG 09/57] ep93xx_wdt: unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ep93xx_wdt.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c index 0e4787a0bb87..cdcdd11173a7 100644 --- a/drivers/watchdog/ep93xx_wdt.c +++ b/drivers/watchdog/ep93xx_wdt.c @@ -28,9 +28,9 @@ #include #include #include +#include #include -#include #define WDT_VERSION "0.3" #define PFX "ep93xx_wdt: " @@ -136,9 +136,8 @@ static struct watchdog_info ident = { .identity = "EP93xx Watchdog", }; -static int -ep93xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long ep93xx_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { int ret = -ENOTTY; @@ -174,8 +173,8 @@ static int ep93xx_wdt_release(struct inode *inode, struct file *file) if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) wdt_shutdown(); else - printk(KERN_CRIT PFX "Device closed unexpectedly - " - "timer will not stop\n"); + printk(KERN_CRIT PFX + "Device closed unexpectedly - timer will not stop\n"); clear_bit(WDT_IN_USE, &wdt_status); clear_bit(WDT_OK_TO_CLOSE, &wdt_status); @@ -186,7 +185,7 @@ static int ep93xx_wdt_release(struct inode *inode, struct file *file) static const struct file_operations ep93xx_wdt_fops = { .owner = THIS_MODULE, .write = ep93xx_wdt_write, - .ioctl = ep93xx_wdt_ioctl, + .unlocked_ioctl = ep93xx_wdt_ioctl, .open = ep93xx_wdt_open, .release = ep93xx_wdt_release, }; @@ -243,7 +242,9 @@ module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1<=timeout<=3600, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); MODULE_AUTHOR("Ray Lehtiniemi ," "Alessandro Zummo "); -- cgit v1.2.3 From 89ea2429873e69201173f3606ab04d751f737cc4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:41 +0100 Subject: [WATCHDOG 10/57] eurotechwdt: unlocked_ioctl, code lock check and tidy Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/eurotechwdt.c | 57 ++++++++++++++++++++++++++---------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c index b14e9d1f164d..b94e6ef4c7a7 100644 --- a/drivers/watchdog/eurotechwdt.c +++ b/drivers/watchdog/eurotechwdt.c @@ -56,14 +56,15 @@ #include #include #include +#include +#include -#include -#include #include static unsigned long eurwdt_is_open; static int eurwdt_timeout; static char eur_expect_close; +static spinlock_t eurwdt_lock; /* * You must set these - there is no sane way to probe for this board. @@ -78,7 +79,9 @@ static char *ev = "int"; static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Some symbolic names @@ -137,7 +140,8 @@ static void eurwdt_activate_timer(void) { eurwdt_disable_timer(); eurwdt_write_reg(WDT_CTRL_REG, 0x01); /* activate the WDT */ - eurwdt_write_reg(WDT_OUTPIN_CFG, !strcmp("int", ev) ? WDT_EVENT_INT : WDT_EVENT_REBOOT); + eurwdt_write_reg(WDT_OUTPIN_CFG, + !strcmp("int", ev) ? WDT_EVENT_INT : WDT_EVENT_REBOOT); /* Setting interrupt line */ if (irq == 2 || irq > 15 || irq < 0) { @@ -206,21 +210,21 @@ size_t count, loff_t *ppos) for (i = 0; i != count; i++) { char c; - if(get_user(c, buf+i)) + if (get_user(c, buf+i)) return -EFAULT; if (c == 'V') eur_expect_close = 42; } } + spin_lock(&eurwdt_lock); eurwdt_ping(); /* the default timeout */ + spin_unlock(&eurwdt_lock); } - return count; } /** * eurwdt_ioctl: - * @inode: inode of the device * @file: file handle to the device * @cmd: watchdog command * @arg: argument pointer @@ -229,13 +233,14 @@ size_t count, loff_t *ppos) * according to their available features. */ -static int eurwdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long eurwdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "WDT Eurotech CPU-1220/1410", }; @@ -243,7 +248,7 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file, int time; int options, retval = -EINVAL; - switch(cmd) { + switch (cmd) { default: return -ENOTTY; @@ -255,7 +260,9 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file, return put_user(0, p); case WDIOC_KEEPALIVE: + spin_lock(&eurwdt_lock); eurwdt_ping(); + spin_unlock(&eurwdt_lock); return 0; case WDIOC_SETTIMEOUT: @@ -266,8 +273,10 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file, if (time < 0 || time > 255) return -EINVAL; + spin_lock(&eurwdt_lock); eurwdt_timeout = time; eurwdt_set_timeout(time); + spin_unlock(&eurwdt_lock); /* Fall */ case WDIOC_GETTIMEOUT: @@ -276,6 +285,7 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file, case WDIOC_SETOPTIONS: if (get_user(options, p)) return -EFAULT; + spin_lock(&eurwdt_lock); if (options & WDIOS_DISABLECARD) { eurwdt_disable_timer(); retval = 0; @@ -285,6 +295,7 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file, eurwdt_ping(); retval = 0; } + spin_unlock(&eurwdt_lock); return retval; } } @@ -322,10 +333,11 @@ static int eurwdt_open(struct inode *inode, struct file *file) static int eurwdt_release(struct inode *inode, struct file *file) { - if (eur_expect_close == 42) { + if (eur_expect_close == 42) eurwdt_disable_timer(); - } else { - printk(KERN_CRIT "eurwdt: Unexpected close, not stopping watchdog!\n"); + else { + printk(KERN_CRIT + "eurwdt: Unexpected close, not stopping watchdog!\n"); eurwdt_ping(); } clear_bit(0, &eurwdt_is_open); @@ -362,11 +374,11 @@ static int eurwdt_notify_sys(struct notifier_block *this, unsigned long code, static const struct file_operations eurwdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = eurwdt_write, - .ioctl = eurwdt_ioctl, - .open = eurwdt_open, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = eurwdt_write, + .unlocked_ioctl = eurwdt_ioctl, + .open = eurwdt_open, .release = eurwdt_release, }; @@ -419,7 +431,7 @@ static int __init eurwdt_init(void) int ret; ret = request_irq(irq, eurwdt_interrupt, IRQF_DISABLED, "eurwdt", NULL); - if(ret) { + if (ret) { printk(KERN_ERR "eurwdt: IRQ %d is not free.\n", irq); goto out; } @@ -432,10 +444,13 @@ static int __init eurwdt_init(void) ret = register_reboot_notifier(&eurwdt_notifier); if (ret) { - printk(KERN_ERR "eurwdt: can't register reboot notifier (err=%d)\n", ret); + printk(KERN_ERR + "eurwdt: can't register reboot notifier (err=%d)\n", ret); goto outreg; } + spin_lock_init(&eurwdt_lock); + ret = misc_register(&eurwdt_miscdev); if (ret) { printk(KERN_ERR "eurwdt: can't misc_register on minor=%d\n", -- cgit v1.2.3 From 6513e2a03887c6c9bd0b30593827a01ce3f7b542 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:46 +0100 Subject: [WATCHDOG 11/57] hpwdt: couple of include cleanups clean-up includes Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/hpwdt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 6a63535fc04d..45bf66c72457 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -39,9 +39,9 @@ #include #include #include -#include +#include #include -#include +#include #define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */ #define CRU_BIOS_SIGNATURE_VALUE 0x55524324 -- cgit v1.2.3 From 2e43ba73d4e2d34ddb9843e30480be3752514c16 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:52 +0100 Subject: [WATCHDOG 12/57] ib700wdt: clean up and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ib700wdt.c | 103 ++++++++++++++++++++++---------------------- 1 file changed, 52 insertions(+), 51 deletions(-) diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c index 4b89f401691a..805a54b02aa1 100644 --- a/drivers/watchdog/ib700wdt.c +++ b/drivers/watchdog/ib700wdt.c @@ -42,8 +42,8 @@ #include #include -#include -#include +#include +#include #include static struct platform_device *ibwdt_platform_device; @@ -120,7 +120,9 @@ static int wd_margin = WD_TIMO; static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* @@ -165,8 +167,8 @@ ibwdt_set_heartbeat(int t) * /dev/watchdog handling */ -static ssize_t -ibwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t ibwdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { if (count) { if (!nowayout) { @@ -188,77 +190,71 @@ ibwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppo return count; } -static int -ibwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long ibwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { int new_margin; void __user *argp = (void __user *)arg; int __user *p = argp; static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "IB700 WDT", }; switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof(ident))) - return -EFAULT; - break; + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - return put_user(0, p); + return put_user(0, p); case WDIOC_KEEPALIVE: - ibwdt_ping(); - break; + ibwdt_ping(); + break; case WDIOC_SETTIMEOUT: - if (get_user(new_margin, p)) - return -EFAULT; - if (ibwdt_set_heartbeat(new_margin)) - return -EINVAL; - ibwdt_ping(); - /* Fall */ + if (get_user(new_margin, p)) + return -EFAULT; + if (ibwdt_set_heartbeat(new_margin)) + return -EINVAL; + ibwdt_ping(); + /* Fall */ case WDIOC_GETTIMEOUT: - return put_user(wd_times[wd_margin], p); + return put_user(wd_times[wd_margin], p); case WDIOC_SETOPTIONS: { - int options, retval = -EINVAL; + int options, retval = -EINVAL; - if (get_user(options, p)) - return -EFAULT; + if (get_user(options, p)) + return -EFAULT; - if (options & WDIOS_DISABLECARD) { - ibwdt_disable(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) { - ibwdt_ping(); - retval = 0; - } - - return retval; + if (options & WDIOS_DISABLECARD) { + ibwdt_disable(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + ibwdt_ping(); + retval = 0; + } + return retval; } - default: - return -ENOTTY; + return -ENOTTY; } return 0; } -static int -ibwdt_open(struct inode *inode, struct file *file) +static int ibwdt_open(struct inode *inode, struct file *file) { - if (test_and_set_bit(0, &ibwdt_is_open)) { + if (test_and_set_bit(0, &ibwdt_is_open)) return -EBUSY; - } if (nowayout) __module_get(THIS_MODULE); @@ -273,7 +269,8 @@ ibwdt_close(struct inode *inode, struct file *file) if (expect_close == 42) { ibwdt_disable(); } else { - printk(KERN_CRIT PFX "WDT device closed unexpectedly. WDT will not stop!\n"); + printk(KERN_CRIT PFX + "WDT device closed unexpectedly. WDT will not stop!\n"); ibwdt_ping(); } clear_bit(0, &ibwdt_is_open); @@ -289,7 +286,7 @@ static const struct file_operations ibwdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = ibwdt_write, - .ioctl = ibwdt_ioctl, + .unlocked_ioctl = ibwdt_ioctl, .open = ibwdt_open, .release = ibwdt_close, }; @@ -310,21 +307,23 @@ static int __devinit ibwdt_probe(struct platform_device *dev) #if WDT_START != WDT_STOP if (!request_region(WDT_STOP, 1, "IB700 WDT")) { - printk (KERN_ERR PFX "STOP method I/O %X is not available.\n", WDT_STOP); + printk(KERN_ERR PFX "STOP method I/O %X is not available.\n", + WDT_STOP); res = -EIO; goto out_nostopreg; } #endif if (!request_region(WDT_START, 1, "IB700 WDT")) { - printk (KERN_ERR PFX "START method I/O %X is not available.\n", WDT_START); + printk(KERN_ERR PFX "START method I/O %X is not available.\n", + WDT_START); res = -EIO; goto out_nostartreg; } res = misc_register(&ibwdt_miscdev); if (res) { - printk (KERN_ERR PFX "failed to register misc device\n"); + printk(KERN_ERR PFX "failed to register misc device\n"); goto out_nomisc; } return 0; @@ -342,9 +341,9 @@ out_nostopreg: static int __devexit ibwdt_remove(struct platform_device *dev) { misc_deregister(&ibwdt_miscdev); - release_region(WDT_START,1); + release_region(WDT_START, 1); #if WDT_START != WDT_STOP - release_region(WDT_STOP,1); + release_region(WDT_STOP, 1); #endif return 0; } @@ -369,13 +368,15 @@ static int __init ibwdt_init(void) { int err; - printk(KERN_INFO PFX "WDT driver for IB700 single board computer initialising.\n"); + printk(KERN_INFO PFX + "WDT driver for IB700 single board computer initialising.\n"); err = platform_driver_register(&ibwdt_driver); if (err) return err; - ibwdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0); + ibwdt_platform_device = platform_device_register_simple(DRV_NAME, + -1, NULL, 0); if (IS_ERR(ibwdt_platform_device)) { err = PTR_ERR(ibwdt_platform_device); goto unreg_platform_driver; -- cgit v1.2.3 From 0829291ea4a25c3c2ca4fba34aa38a1ee1e0b94b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:57 +0100 Subject: [WATCHDOG 13/57] i6300esb: Style, unlocked_ioctl, cleanup Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/i6300esb.c | 342 +++++++++++++++++++++----------------------- 1 file changed, 167 insertions(+), 175 deletions(-) diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c index ca44fd9b19bb..01a283f7a271 100644 --- a/drivers/watchdog/i6300esb.c +++ b/drivers/watchdog/i6300esb.c @@ -38,9 +38,8 @@ #include #include #include - -#include -#include +#include +#include /* Module and version information */ #define ESB_VERSION "0.03" @@ -59,17 +58,17 @@ #define ESB_RELOAD_REG BASEADDR + 0x0c /* Reload register */ /* Lock register bits */ -#define ESB_WDT_FUNC ( 0x01 << 2 ) /* Watchdog functionality */ -#define ESB_WDT_ENABLE ( 0x01 << 1 ) /* Enable WDT */ -#define ESB_WDT_LOCK ( 0x01 << 0 ) /* Lock (nowayout) */ +#define ESB_WDT_FUNC (0x01 << 2) /* Watchdog functionality */ +#define ESB_WDT_ENABLE (0x01 << 1) /* Enable WDT */ +#define ESB_WDT_LOCK (0x01 << 0) /* Lock (nowayout) */ /* Config register bits */ -#define ESB_WDT_REBOOT ( 0x01 << 5 ) /* Enable reboot on timeout */ -#define ESB_WDT_FREQ ( 0x01 << 2 ) /* Decrement frequency */ -#define ESB_WDT_INTTYPE ( 0x11 << 0 ) /* Interrupt type on timer1 timeout */ +#define ESB_WDT_REBOOT (0x01 << 5) /* Enable reboot on timeout */ +#define ESB_WDT_FREQ (0x01 << 2) /* Decrement frequency */ +#define ESB_WDT_INTTYPE (0x11 << 0) /* Interrupt type on timer1 timeout */ /* Reload register bits */ -#define ESB_WDT_RELOAD ( 0x01 << 8 ) /* prevent timeout */ +#define ESB_WDT_RELOAD (0x01 << 8) /* prevent timeout */ /* Magic constants */ #define ESB_UNLOCK1 0x80 /* Step 1 to unlock reset registers */ @@ -84,14 +83,20 @@ static unsigned short triggered; /* The status of the watchdog upon boot */ static char esb_expect_close; /* module parameters */ -#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat (1 Date: Mon, 19 May 2008 14:06:03 +0100 Subject: [WATCHDOG 14/57] ibmasr: coding style, locking verify There is a new #if 0 section here which is a suggested fix for the horrible PCI hack in the existing code. Would be good if someone with a box that uses this device could test it. Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ibmasr.c | 149 +++++++++++++++++++++++++++------------------- 1 file changed, 87 insertions(+), 62 deletions(-) diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c index 94155f6136c2..6824bf80b37e 100644 --- a/drivers/watchdog/ibmasr.c +++ b/drivers/watchdog/ibmasr.c @@ -19,9 +19,8 @@ #include #include #include - -#include -#include +#include +#include enum { @@ -70,10 +69,13 @@ static char asr_expect_close; static unsigned int asr_type, asr_base, asr_length; static unsigned int asr_read_addr, asr_write_addr; static unsigned char asr_toggle_mask, asr_disable_mask; +static spinlock_t asr_lock; -static void asr_toggle(void) +static void __asr_toggle(void) { - unsigned char reg = inb(asr_read_addr); + unsigned char reg; + + reg = inb(asr_read_addr); outb(reg & ~asr_toggle_mask, asr_write_addr); reg = inb(asr_read_addr); @@ -83,12 +85,21 @@ static void asr_toggle(void) outb(reg & ~asr_toggle_mask, asr_write_addr); reg = inb(asr_read_addr); + spin_unlock(&asr_lock); +} + +static void asr_toggle(void) +{ + spin_lock(&asr_lock); + __asr_toggle(); + spin_unlock(&asr_lock); } static void asr_enable(void) { unsigned char reg; + spin_lock(&asr_lock); if (asr_type == ASMTYPE_TOPAZ) { /* asr_write_addr == asr_read_addr */ reg = inb(asr_read_addr); @@ -99,17 +110,21 @@ static void asr_enable(void) * First make sure the hardware timer is reset by toggling * ASR hardware timer line. */ - asr_toggle(); + __asr_toggle(); reg = inb(asr_read_addr); outb(reg & ~asr_disable_mask, asr_write_addr); } reg = inb(asr_read_addr); + spin_unlock(&asr_lock); } static void asr_disable(void) { - unsigned char reg = inb(asr_read_addr); + unsigned char reg; + + spin_lock(&asr_lock); + reg = inb(asr_read_addr); if (asr_type == ASMTYPE_TOPAZ) /* asr_write_addr == asr_read_addr */ @@ -122,6 +137,7 @@ static void asr_disable(void) outb(reg | asr_disable_mask, asr_write_addr); } reg = inb(asr_read_addr); + spin_unlock(&asr_lock); } static int __init asr_get_base_address(void) @@ -133,7 +149,8 @@ static int __init asr_get_base_address(void) switch (asr_type) { case ASMTYPE_TOPAZ: - /* SELECT SuperIO CHIP FOR QUERYING (WRITE 0x07 TO BOTH 0x2E and 0x2F) */ + /* SELECT SuperIO CHIP FOR QUERYING + (WRITE 0x07 TO BOTH 0x2E and 0x2F) */ outb(0x07, 0x2e); outb(0x07, 0x2f); @@ -154,14 +171,26 @@ static int __init asr_get_base_address(void) case ASMTYPE_JASPER: type = "Jaspers "; - - /* FIXME: need to use pci_config_lock here, but it's not exported */ +#if 0 + u32 r; + /* Suggested fix */ + pdev = pci_get_bus_and_slot(0, DEVFN(0x1f, 0)); + if (pdev == NULL) + return -ENODEV; + pci_read_config_dword(pdev, 0x58, &r); + asr_base = r & 0xFFFE; + pci_dev_put(pdev); +#else + /* FIXME: need to use pci_config_lock here, + but it's not exported */ /* spin_lock_irqsave(&pci_config_lock, flags);*/ /* Select the SuperIO chip in the PCI I/O port register */ outl(0x8000f858, 0xcf8); + /* BUS 0, Slot 1F, fnc 0, offset 58 */ + /* * Read the base address for the SuperIO chip. * Only the lower 16 bits are valid, but the address is word @@ -170,7 +199,7 @@ static int __init asr_get_base_address(void) asr_base = inl(0xcfc) & 0xfffe; /* spin_unlock_irqrestore(&pci_config_lock, flags);*/ - +#endif asr_read_addr = asr_write_addr = asr_base + JASPER_ASR_REG_OFFSET; asr_toggle_mask = JASPER_ASR_TOGGLE_MASK; @@ -241,11 +270,10 @@ static ssize_t asr_write(struct file *file, const char __user *buf, return count; } -static int asr_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long asr_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { static const struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | + .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, .identity = "IBM ASR" }; @@ -254,53 +282,45 @@ static int asr_ioctl(struct inode *inode, struct file *file, int heartbeat; switch (cmd) { - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident)) ? - -EFAULT : 0; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_KEEPALIVE: + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + asr_toggle(); + return 0; + /* + * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT + * and WDIOC_GETTIMEOUT always returns 256. + */ + case WDIOC_GETTIMEOUT: + heartbeat = 256; + return put_user(heartbeat, p); + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; + if (get_user(new_options, p)) + return -EFAULT; + if (new_options & WDIOS_DISABLECARD) { + asr_disable(); + retval = 0; + } + if (new_options & WDIOS_ENABLECARD) { + asr_enable(); asr_toggle(); - return 0; - - /* - * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT - * and WDIOC_GETTIMEOUT always returns 256. - */ - case WDIOC_GETTIMEOUT: - heartbeat = 256; - return put_user(heartbeat, p); - - case WDIOC_SETOPTIONS: { - int new_options, retval = -EINVAL; - - if (get_user(new_options, p)) - return -EFAULT; - - if (new_options & WDIOS_DISABLECARD) { - asr_disable(); - retval = 0; - } - - if (new_options & WDIOS_ENABLECARD) { - asr_enable(); - asr_toggle(); - retval = 0; - } - - return retval; + retval = 0; } + return retval; + } + default: + return -ENOTTY; } - - return -ENOTTY; } static int asr_open(struct inode *inode, struct file *file) { - if(test_and_set_bit(0, &asr_is_open)) + if (test_and_set_bit(0, &asr_is_open)) return -EBUSY; asr_toggle(); @@ -314,7 +334,8 @@ static int asr_release(struct inode *inode, struct file *file) if (asr_expect_close == 42) asr_disable(); else { - printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n"); + printk(KERN_CRIT PFX + "unexpected close, not stopping watchdog!\n"); asr_toggle(); } clear_bit(0, &asr_is_open); @@ -323,12 +344,12 @@ static int asr_release(struct inode *inode, struct file *file) } static const struct file_operations asr_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = asr_write, - .ioctl = asr_ioctl, - .open = asr_open, - .release = asr_release, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = asr_write, + .unlocked_ioctl = asr_ioctl, + .open = asr_open, + .release = asr_release, }; static struct miscdevice asr_miscdev = { @@ -367,6 +388,8 @@ static int __init ibmasr_init(void) if (!asr_type) return -ENODEV; + spin_lock_init(&asr_lock); + rc = asr_get_base_address(); if (rc) return rc; @@ -395,7 +418,9 @@ module_init(ibmasr_init); module_exit(ibmasr_exit); module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); MODULE_DESCRIPTION("IBM Automatic Server Restart driver"); MODULE_AUTHOR("Andrey Panin"); -- cgit v1.2.3 From 9b9dbcca3fa13acd64dbb9258bfe997809d6073b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:08 +0100 Subject: [WATCHDOG 15/57] indydog: Clean up and tidy Switch to unlocked_ioctl as well Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/indydog.c | 114 ++++++++++++++++++++++++--------------------- 1 file changed, 62 insertions(+), 52 deletions(-) diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c index 788245bdaa7f..0bffea37404e 100644 --- a/drivers/watchdog/indydog.c +++ b/drivers/watchdog/indydog.c @@ -1,7 +1,8 @@ /* * IndyDog 0.3 A Hardware Watchdog Device for SGI IP22 * - * (c) Copyright 2002 Guido Guenther , All Rights Reserved. + * (c) Copyright 2002 Guido Guenther , + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -22,32 +23,42 @@ #include #include #include -#include +#include #include #define PFX "indydog: " -static int indydog_alive; +static unsigned long indydog_alive; +static spinlock_t indydog_lock; #define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static void indydog_start(void) { - u32 mc_ctrl0 = sgimc->cpuctrl0; + u32 mc_ctrl0; + spin_lock(&indydog_lock); + mc_ctrl0 = sgimc->cpuctrl0; mc_ctrl0 = sgimc->cpuctrl0 | SGIMC_CCTRL0_WDOG; sgimc->cpuctrl0 = mc_ctrl0; + spin_unlock(&indydog_lock); } static void indydog_stop(void) { - u32 mc_ctrl0 = sgimc->cpuctrl0; + u32 mc_ctrl0; + spin_lock(&indydog_lock); + + mc_ctrl0 = sgimc->cpuctrl0; mc_ctrl0 &= ~SGIMC_CCTRL0_WDOG; sgimc->cpuctrl0 = mc_ctrl0; + spin_unlock(&indydog_lock); printk(KERN_INFO PFX "Stopped watchdog timer.\n"); } @@ -62,7 +73,7 @@ static void indydog_ping(void) */ static int indydog_open(struct inode *inode, struct file *file) { - if (indydog_alive) + if (test_and_set_bit(0, &indydog_alive)) return -EBUSY; if (nowayout) @@ -84,23 +95,21 @@ static int indydog_release(struct inode *inode, struct file *file) * Lock it in if it's a module and we defined ...NOWAYOUT */ if (!nowayout) indydog_stop(); /* Turn the WDT off */ - - indydog_alive = 0; - + clear_bit(0, &indydog_alive); return 0; } -static ssize_t indydog_write(struct file *file, const char *data, size_t len, loff_t *ppos) +static ssize_t indydog_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { /* Refresh the timer. */ - if (len) { + if (len) indydog_ping(); - } return len; } -static int indydog_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long indydog_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int options, retval = -EINVAL; static struct watchdog_info ident = { @@ -111,42 +120,40 @@ static int indydog_ioctl(struct inode *inode, struct file *file, }; switch (cmd) { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - if (copy_to_user((struct watchdog_info *)arg, - &ident, sizeof(ident))) - return -EFAULT; - return 0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0,(int *)arg); - case WDIOC_KEEPALIVE: - indydog_ping(); - return 0; - case WDIOC_GETTIMEOUT: - return put_user(WATCHDOG_TIMEOUT,(int *)arg); - case WDIOC_SETOPTIONS: - { - if (get_user(options, (int *)arg)) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) { - indydog_stop(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) { - indydog_start(); - retval = 0; - } - - return retval; + case WDIOC_GETSUPPORT: + if (copy_to_user((struct watchdog_info *)arg, + &ident, sizeof(ident))) + return -EFAULT; + return 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, (int *)arg); + case WDIOC_KEEPALIVE: + indydog_ping(); + return 0; + case WDIOC_GETTIMEOUT: + return put_user(WATCHDOG_TIMEOUT, (int *)arg); + case WDIOC_SETOPTIONS: + { + if (get_user(options, (int *)arg)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + indydog_stop(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + indydog_start(); + retval = 0; } + return retval; + } + default: + return -ENOTTY; } } -static int indydog_notify_sys(struct notifier_block *this, unsigned long code, void *unused) +static int indydog_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) { if (code == SYS_DOWN || code == SYS_HALT) indydog_stop(); /* Turn the WDT off */ @@ -158,7 +165,7 @@ static const struct file_operations indydog_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = indydog_write, - .ioctl = indydog_ioctl, + .unlocked_ioctl = indydog_ioctl, .open = indydog_open, .release = indydog_release, }; @@ -180,17 +187,20 @@ static int __init watchdog_init(void) { int ret; + spin_lock_init(&indydog_lock); + ret = register_reboot_notifier(&indydog_notifier); if (ret) { - printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - ret); + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", ret); return ret; } ret = misc_register(&indydog_miscdev); if (ret) { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); unregister_reboot_notifier(&indydog_notifier); return ret; } -- cgit v1.2.3 From 02e3814e193ff798676793016851bc222366dc6a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:14 +0100 Subject: [WATCHDOG 16/57] iop: watchdog switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/iop_wdt.c | 46 ++++++++++++++++++++++++---------------------- 1 file changed, 24 insertions(+), 22 deletions(-) diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c index bbbd91af754d..e54c888d2afe 100644 --- a/drivers/watchdog/iop_wdt.c +++ b/drivers/watchdog/iop_wdt.c @@ -37,6 +37,7 @@ static int nowayout = WATCHDOG_NOWAYOUT; static unsigned long wdt_status; static unsigned long boot_status; +static spinlock_t wdt_lock; #define WDT_IN_USE 0 #define WDT_OK_TO_CLOSE 1 @@ -68,8 +69,10 @@ static void wdt_enable(void) /* Arm and enable the Timer to starting counting down from 0xFFFF.FFFF * Takes approx. 10.7s to timeout */ + spin_lock(&wdt_lock); write_wdtcr(IOP_WDTCR_EN_ARM); write_wdtcr(IOP_WDTCR_EN); + spin_unlock(&wdt_lock); } /* returns 0 if the timer was successfully disabled */ @@ -77,9 +80,11 @@ static int wdt_disable(void) { /* Stop Counting */ if (wdt_supports_disable()) { + spin_lock(&wdt_lock); write_wdtcr(IOP_WDTCR_DIS_ARM); write_wdtcr(IOP_WDTCR_DIS); clear_bit(WDT_ENABLED, &wdt_status); + spin_unlock(&wdt_lock); printk(KERN_INFO "WATCHDOG: Disabled\n"); return 0; } else @@ -92,16 +97,12 @@ static int iop_wdt_open(struct inode *inode, struct file *file) return -EBUSY; clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - wdt_enable(); - set_bit(WDT_ENABLED, &wdt_status); - return nonseekable_open(inode, file); } -static ssize_t -iop_wdt_write(struct file *file, const char *data, size_t len, +static ssize_t iop_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) { if (len) { @@ -121,41 +122,39 @@ iop_wdt_write(struct file *file, const char *data, size_t len, } wdt_enable(); } - return len; } -static struct watchdog_info ident = { +static const struct watchdog_info ident = { .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, .identity = "iop watchdog", }; -static int -iop_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long iop_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { int options; int ret = -ENOTTY; + int __user *argp = (int __user *)arg; switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user - ((struct watchdog_info *)arg, &ident, sizeof ident)) + if (copy_to_user(argp, &ident, sizeof ident)) ret = -EFAULT; else ret = 0; break; case WDIOC_GETSTATUS: - ret = put_user(0, (int *)arg); + ret = put_user(0, argp); break; case WDIOC_GETBOOTSTATUS: - ret = put_user(boot_status, (int *)arg); + ret = put_user(boot_status, argp); break; case WDIOC_GETTIMEOUT: - ret = put_user(iop_watchdog_timeout(), (int *)arg); + ret = put_user(iop_watchdog_timeout(), argp); break; case WDIOC_KEEPALIVE: @@ -177,14 +176,12 @@ iop_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, } else ret = 0; } - if (options & WDIOS_ENABLECARD) { wdt_enable(); ret = 0; } break; } - return ret; } @@ -214,7 +211,7 @@ static const struct file_operations iop_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = iop_wdt_write, - .ioctl = iop_wdt_ioctl, + .unlocked_ioctl = iop_wdt_ioctl, .open = iop_wdt_open, .release = iop_wdt_release, }; @@ -229,10 +226,8 @@ static int __init iop_wdt_init(void) { int ret; - ret = misc_register(&iop_wdt_miscdev); - if (ret == 0) - printk("iop watchdog timer: timeout %lu sec\n", - iop_watchdog_timeout()); + spin_lock_init(&wdt_lock); + /* check if the reset was caused by the watchdog timer */ boot_status = (read_rcsr() & IOP_RCSR_WDT) ? WDIOF_CARDRESET : 0; @@ -242,6 +237,13 @@ static int __init iop_wdt_init(void) */ write_wdtsr(IOP13XX_WDTCR_IB_RESET); + /* Register after we have the device set up so we cannot race + with an open */ + ret = misc_register(&iop_wdt_miscdev); + if (ret == 0) + printk("iop watchdog timer: timeout %lu sec\n", + iop_watchdog_timeout()); + return ret; } -- cgit v1.2.3 From 30abcec14573e3462f18d63f4a8f154a23689f1b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:19 +0100 Subject: [WATCHDOG 17/57] it8712f: unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/it8712f_wdt.c | 77 +++++++++++++++--------------------------- 1 file changed, 27 insertions(+), 50 deletions(-) diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c index 445b7e812112..51bfd5721833 100644 --- a/drivers/watchdog/it8712f_wdt.c +++ b/drivers/watchdog/it8712f_wdt.c @@ -30,9 +30,8 @@ #include #include #include - -#include -#include +#include +#include #define NAME "it8712f_wdt" @@ -50,7 +49,7 @@ static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); -static struct semaphore it8712f_wdt_sem; +static unsigned long wdt_open; static unsigned expect_close; static spinlock_t io_lock; static unsigned char revision; @@ -86,22 +85,19 @@ static unsigned short address; #define WDT_OUT_PWROK 0x10 #define WDT_OUT_KRST 0x40 -static int -superio_inb(int reg) +static int superio_inb(int reg) { outb(reg, REG); return inb(VAL); } -static void -superio_outb(int val, int reg) +static void superio_outb(int val, int reg) { outb(reg, REG); outb(val, VAL); } -static int -superio_inw(int reg) +static int superio_inw(int reg) { int val; outb(reg++, REG); @@ -111,15 +107,13 @@ superio_inw(int reg) return val; } -static inline void -superio_select(int ldn) +static inline void superio_select(int ldn) { outb(LDN, REG); outb(ldn, VAL); } -static inline void -superio_enter(void) +static inline void superio_enter(void) { spin_lock(&io_lock); outb(0x87, REG); @@ -128,22 +122,19 @@ superio_enter(void) outb(0x55, REG); } -static inline void -superio_exit(void) +static inline void superio_exit(void) { outb(0x02, REG); outb(0x02, VAL); spin_unlock(&io_lock); } -static inline void -it8712f_wdt_ping(void) +static inline void it8712f_wdt_ping(void) { inb(address); } -static void -it8712f_wdt_update_margin(void) +static void it8712f_wdt_update_margin(void) { int config = WDT_OUT_KRST | WDT_OUT_PWROK; int units = margin; @@ -165,8 +156,7 @@ it8712f_wdt_update_margin(void) superio_outb(units, WDT_TIMEOUT); } -static int -it8712f_wdt_get_status(void) +static int it8712f_wdt_get_status(void) { if (superio_inb(WDT_CONTROL) & 0x01) return WDIOF_CARDRESET; @@ -174,8 +164,7 @@ it8712f_wdt_get_status(void) return 0; } -static void -it8712f_wdt_enable(void) +static void it8712f_wdt_enable(void) { printk(KERN_DEBUG NAME ": enabling watchdog timer\n"); superio_enter(); @@ -190,8 +179,7 @@ it8712f_wdt_enable(void) it8712f_wdt_ping(); } -static void -it8712f_wdt_disable(void) +static void it8712f_wdt_disable(void) { printk(KERN_DEBUG NAME ": disabling watchdog timer\n"); @@ -207,8 +195,7 @@ it8712f_wdt_disable(void) superio_exit(); } -static int -it8712f_wdt_notify(struct notifier_block *this, +static int it8712f_wdt_notify(struct notifier_block *this, unsigned long code, void *unused) { if (code == SYS_HALT || code == SYS_POWER_OFF) @@ -222,9 +209,8 @@ static struct notifier_block it8712f_wdt_notifier = { .notifier_call = it8712f_wdt_notify, }; -static ssize_t -it8712f_wdt_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) +static ssize_t it8712f_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { /* check for a magic close character */ if (len) { @@ -245,9 +231,8 @@ it8712f_wdt_write(struct file *file, const char __user *data, return len; } -static int -it8712f_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -302,19 +287,16 @@ it8712f_wdt_ioctl(struct inode *inode, struct file *file, } } -static int -it8712f_wdt_open(struct inode *inode, struct file *file) +static int it8712f_wdt_open(struct inode *inode, struct file *file) { /* only allow one at a time */ - if (down_trylock(&it8712f_wdt_sem)) + if (test_and_set_bit(0, &wdt_open)) return -EBUSY; it8712f_wdt_enable(); - return nonseekable_open(inode, file); } -static int -it8712f_wdt_release(struct inode *inode, struct file *file) +static int it8712f_wdt_release(struct inode *inode, struct file *file) { if (expect_close != 42) { printk(KERN_WARNING NAME @@ -324,7 +306,7 @@ it8712f_wdt_release(struct inode *inode, struct file *file) it8712f_wdt_disable(); } expect_close = 0; - up(&it8712f_wdt_sem); + clear_bit(0, &wdt_open); return 0; } @@ -333,7 +315,7 @@ static const struct file_operations it8712f_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = it8712f_wdt_write, - .ioctl = it8712f_wdt_ioctl, + .unlocked_ioctl = it8712f_wdt_ioctl, .open = it8712f_wdt_open, .release = it8712f_wdt_release, }; @@ -344,8 +326,7 @@ static struct miscdevice it8712f_wdt_miscdev = { .fops = &it8712f_wdt_fops, }; -static int __init -it8712f_wdt_find(unsigned short *address) +static int __init it8712f_wdt_find(unsigned short *address) { int err = -ENODEV; int chip_type; @@ -387,8 +368,7 @@ exit: return err; } -static int __init -it8712f_wdt_init(void) +static int __init it8712f_wdt_init(void) { int err = 0; @@ -404,8 +384,6 @@ it8712f_wdt_init(void) it8712f_wdt_disable(); - sema_init(&it8712f_wdt_sem, 1); - err = register_reboot_notifier(&it8712f_wdt_notifier); if (err) { printk(KERN_ERR NAME ": unable to register reboot notifier\n"); @@ -430,8 +408,7 @@ out: return err; } -static void __exit -it8712f_wdt_exit(void) +static void __exit it8712f_wdt_exit(void) { misc_deregister(&it8712f_wdt_miscdev); unregister_reboot_notifier(&it8712f_wdt_notifier); -- cgit v1.2.3 From 0e6fa3fb38e2c89ba9abce9a8b74867f07d20d19 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:25 +0100 Subject: [WATCHDOG 18/57] iTCO: unlocked_ioctl, coding style and cleanup Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/iTCO_vendor.h | 15 ++ drivers/watchdog/iTCO_vendor_support.c | 53 +++--- drivers/watchdog/iTCO_wdt.c | 296 ++++++++++++++++----------------- 3 files changed, 189 insertions(+), 175 deletions(-) create mode 100644 drivers/watchdog/iTCO_vendor.h diff --git a/drivers/watchdog/iTCO_vendor.h b/drivers/watchdog/iTCO_vendor.h new file mode 100644 index 000000000000..9e27e6422f66 --- /dev/null +++ b/drivers/watchdog/iTCO_vendor.h @@ -0,0 +1,15 @@ +/* iTCO Vendor Specific Support hooks */ +#ifdef CONFIG_ITCO_VENDOR_SUPPORT +extern void iTCO_vendor_pre_start(unsigned long, unsigned int); +extern void iTCO_vendor_pre_stop(unsigned long); +extern void iTCO_vendor_pre_keepalive(unsigned long, unsigned int); +extern void iTCO_vendor_pre_set_heartbeat(unsigned int); +extern int iTCO_vendor_check_noreboot_on(void); +#else +#define iTCO_vendor_pre_start(acpibase, heartbeat) {} +#define iTCO_vendor_pre_stop(acpibase) {} +#define iTCO_vendor_pre_keepalive(acpibase, heartbeat) {} +#define iTCO_vendor_pre_set_heartbeat(heartbeat) {} +#define iTCO_vendor_check_noreboot_on() 1 + /* 1=check noreboot; 0=don't check */ +#endif diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index cafc465f2ae3..09e9534ac2e4 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -32,7 +32,9 @@ #include /* For __init/__exit/... */ #include /* For io-port access */ -#include /* For inb/outb/... */ +#include /* For inb/outb/... */ + +#include "iTCO_vendor.h" /* iTCO defines */ #define SMI_EN acpibase + 0x30 /* SMI Control and Enable Register */ @@ -40,10 +42,12 @@ #define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ /* List of vendor support modes */ -#define SUPERMICRO_OLD_BOARD 1 /* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */ -#define SUPERMICRO_NEW_BOARD 2 /* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */ +/* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */ +#define SUPERMICRO_OLD_BOARD 1 +/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */ +#define SUPERMICRO_NEW_BOARD 2 -static int vendorsupport = 0; +static int vendorsupport; module_param(vendorsupport, int, 0); MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+"); @@ -143,34 +147,35 @@ static void supermicro_old_pre_keepalive(unsigned long acpibase) */ /* I/O Port's */ -#define SM_REGINDEX 0x2e /* SuperMicro ICH4+ Register Index */ -#define SM_DATAIO 0x2f /* SuperMicro ICH4+ Register Data I/O */ +#define SM_REGINDEX 0x2e /* SuperMicro ICH4+ Register Index */ +#define SM_DATAIO 0x2f /* SuperMicro ICH4+ Register Data I/O */ /* Control Register's */ -#define SM_CTLPAGESW 0x07 /* SuperMicro ICH4+ Control Page Switch */ -#define SM_CTLPAGE 0x08 /* SuperMicro ICH4+ Control Page Num */ +#define SM_CTLPAGESW 0x07 /* SuperMicro ICH4+ Control Page Switch */ +#define SM_CTLPAGE 0x08 /* SuperMicro ICH4+ Control Page Num */ -#define SM_WATCHENABLE 0x30 /* Watchdog enable: Bit 0: 0=off, 1=on */ +#define SM_WATCHENABLE 0x30 /* Watchdog enable: Bit 0: 0=off, 1=on */ -#define SM_WATCHPAGE 0x87 /* Watchdog unlock control page */ +#define SM_WATCHPAGE 0x87 /* Watchdog unlock control page */ -#define SM_ENDWATCH 0xAA /* Watchdog lock control page */ +#define SM_ENDWATCH 0xAA /* Watchdog lock control page */ -#define SM_COUNTMODE 0xf5 /* Watchdog count mode select */ - /* (Bit 3: 0 = seconds, 1 = minutes */ +#define SM_COUNTMODE 0xf5 /* Watchdog count mode select */ + /* (Bit 3: 0 = seconds, 1 = minutes */ -#define SM_WATCHTIMER 0xf6 /* 8-bits, Watchdog timer counter (RW) */ +#define SM_WATCHTIMER 0xf6 /* 8-bits, Watchdog timer counter (RW) */ -#define SM_RESETCONTROL 0xf7 /* Watchdog reset control */ - /* Bit 6: timer is reset by kbd interrupt */ - /* Bit 7: timer is reset by mouse interrupt */ +#define SM_RESETCONTROL 0xf7 /* Watchdog reset control */ + /* Bit 6: timer is reset by kbd interrupt */ + /* Bit 7: timer is reset by mouse interrupt */ static void supermicro_new_unlock_watchdog(void) { - outb(SM_WATCHPAGE, SM_REGINDEX); /* Write 0x87 to port 0x2e twice */ + /* Write 0x87 to port 0x2e twice */ outb(SM_WATCHPAGE, SM_REGINDEX); - - outb(SM_CTLPAGESW, SM_REGINDEX); /* Switch to watchdog control page */ + outb(SM_WATCHPAGE, SM_REGINDEX); + /* Switch to watchdog control page */ + outb(SM_CTLPAGESW, SM_REGINDEX); outb(SM_CTLPAGE, SM_DATAIO); } @@ -192,7 +197,7 @@ static void supermicro_new_pre_start(unsigned int heartbeat) outb(val, SM_DATAIO); /* Write heartbeat interval to WDOG */ - outb (SM_WATCHTIMER, SM_REGINDEX); + outb(SM_WATCHTIMER, SM_REGINDEX); outb((heartbeat & 255), SM_DATAIO); /* Make sure keyboard/mouse interrupts don't interfere */ @@ -277,7 +282,7 @@ EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat); int iTCO_vendor_check_noreboot_on(void) { - switch(vendorsupport) { + switch (vendorsupport) { case SUPERMICRO_OLD_BOARD: return 0; default: @@ -288,13 +293,13 @@ EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on); static int __init iTCO_vendor_init_module(void) { - printk (KERN_INFO PFX "vendor-support=%d\n", vendorsupport); + printk(KERN_INFO PFX "vendor-support=%d\n", vendorsupport); return 0; } static void __exit iTCO_vendor_exit_module(void) { - printk (KERN_INFO PFX "Module Unloaded\n"); + printk(KERN_INFO PFX "Module Unloaded\n"); } module_init(iTCO_vendor_init_module); diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index 95ba985bd341..c9ca8f691d81 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -66,7 +66,8 @@ #include /* For standard types (like size_t) */ #include /* For the -ENODEV/... values */ #include /* For printk/panic/... */ -#include /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */ +#include /* For MODULE_ALIAS_MISCDEV + (WATCHDOG_MINOR) */ #include /* For the watchdog specific items */ #include /* For __init/__exit/... */ #include /* For file operations */ @@ -74,9 +75,10 @@ #include /* For pci functions */ #include /* For io-port access */ #include /* For spin_lock/spin_unlock/... */ +#include /* For copy_to_user/put_user/... */ +#include /* For inb/outb/... */ -#include /* For copy_to_user/put_user/... */ -#include /* For inb/outb/... */ +#include "iTCO_vendor.h" /* TCO related info */ enum iTCO_chipsets { @@ -140,7 +142,7 @@ static struct { {"ICH9DH", 2}, {"ICH9DO", 2}, {"631xESB/632xESB", 2}, - {NULL,0} + {NULL, 0} }; #define ITCO_PCI_DEVICE(dev, data) \ @@ -159,32 +161,32 @@ static struct { * functions that probably will be registered by other drivers. */ static struct pci_device_id iTCO_wdt_pci_tbl[] = { - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AA_0, TCO_ICH )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AB_0, TCO_ICH0 )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_0, TCO_ICH2 )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_10, TCO_ICH2M )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_0, TCO_ICH3 )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_12, TCO_ICH3M )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_0, TCO_ICH4 )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_12, TCO_ICH4M )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801E_0, TCO_CICH )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801EB_0, TCO_ICH5 )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AA_0, TCO_ICH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AB_0, TCO_ICH0)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_0, TCO_ICH2)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_10, TCO_ICH2M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_0, TCO_ICH3)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_12, TCO_ICH3M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_0, TCO_ICH4)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_12, TCO_ICH4M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801E_0, TCO_CICH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801EB_0, TCO_ICH5)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB_1, TCO_6300ESB)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6 )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7 )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8 )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M )}, - { ITCO_PCI_DEVICE(0x2918, TCO_ICH9 )}, - { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M)}, + { ITCO_PCI_DEVICE(0x2918, TCO_ICH9)}, + { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2671, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2672, TCO_631XESB)}, @@ -203,13 +205,15 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(0x267f, TCO_631XESB)}, { 0, }, /* End of list */ }; -MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl); +MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); /* Address definitions for the TCO */ -#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 /* TCO base address */ -#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 /* SMI Control and Enable Register */ +/* TCO base address */ +#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 +/* SMI Control and Enable Register */ +#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 -#define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Current Value */ +#define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Curr. Value */ #define TCOv1_TMR TCOBASE + 0x01 /* TCOv1 Timer Initial Value */ #define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */ #define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */ @@ -222,15 +226,21 @@ MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl); /* internal variables */ static unsigned long is_active; static char expect_release; -static struct { /* this is private data for the iTCO_wdt device */ - unsigned int iTCO_version; /* TCO version/generation */ - unsigned long ACPIBASE; /* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */ - unsigned long __iomem *gcs; /* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2) */ - spinlock_t io_lock; /* the lock for io operations */ - struct pci_dev *pdev; /* the PCI-device */ +static struct { /* this is private data for the iTCO_wdt device */ + /* TCO version/generation */ + unsigned int iTCO_version; + /* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */ + unsigned long ACPIBASE; + /* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2)*/ + unsigned long __iomem *gcs; + /* the lock for io operations */ + spinlock_t io_lock; + /* the PCI-device */ + struct pci_dev *pdev; } iTCO_wdt_private; -static struct platform_device *iTCO_wdt_platform_device; /* the watchdog platform device */ +/* the watchdog platform device */ +static struct platform_device *iTCO_wdt_platform_device; /* module parameters */ #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ @@ -240,22 +250,9 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2driver_data].iTCO_version; + iTCO_wdt_private.iTCO_version = + iTCO_chipset_info[ent->driver_data].iTCO_version; iTCO_wdt_private.ACPIBASE = base_address; iTCO_wdt_private.pdev = pdev; - /* Get the Memory-Mapped GCS register, we need it for the NO_REBOOT flag (TCO v2) */ - /* To get access to it you have to read RCBA from PCI Config space 0xf0 - and use it as base. GCS = RCBA + ICH6_GCS(0x3410). */ + /* Get the Memory-Mapped GCS register, we need it for the + NO_REBOOT flag (TCO v2). To get access to it you have to + read RCBA from PCI Config space 0xf0 and use it as base. + GCS = RCBA + ICH6_GCS(0x3410). */ if (iTCO_wdt_private.iTCO_version == 2) { pci_read_config_dword(pdev, 0xf0, &base_address); RCBA = base_address & 0xffffc000; - iTCO_wdt_private.gcs = ioremap((RCBA + 0x3410),4); + iTCO_wdt_private.gcs = ioremap((RCBA + 0x3410), 4); } /* Check chipset's NO_REBOOT bit */ @@ -657,8 +646,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device /* Set the TCO_EN bit in SMI_EN register */ if (!request_region(SMI_EN, 4, "iTCO_wdt")) { - printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", - SMI_EN ); + printk(KERN_ERR PFX + "I/O address 0x%04lx already in use\n", SMI_EN); ret = -EIO; goto out; } @@ -667,18 +656,20 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device outl(val32, SMI_EN); release_region(SMI_EN, 4); - /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */ - if (!request_region (TCOBASE, 0x20, "iTCO_wdt")) { - printk (KERN_ERR PFX "I/O address 0x%04lx already in use\n", + /* The TCO I/O registers reside in a 32-byte range pointed to + by the TCOBASE value */ + if (!request_region(TCOBASE, 0x20, "iTCO_wdt")) { + printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", TCOBASE); ret = -EIO; goto out; } - printk(KERN_INFO PFX "Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n", - iTCO_chipset_info[ent->driver_data].name, - iTCO_chipset_info[ent->driver_data].iTCO_version, - TCOBASE); + printk(KERN_INFO PFX + "Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n", + iTCO_chipset_info[ent->driver_data].name, + iTCO_chipset_info[ent->driver_data].iTCO_version, + TCOBASE); /* Clear out the (probably old) status */ outb(0, TCO1_STS); @@ -687,27 +678,29 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device /* Make sure the watchdog is not running */ iTCO_wdt_stop(); - /* Check that the heartbeat value is within it's range ; if not reset to the default */ + /* Check that the heartbeat value is within it's range; + if not reset to the default */ if (iTCO_wdt_set_heartbeat(heartbeat)) { iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT); - printk(KERN_INFO PFX "heartbeat value must be 2 Date: Mon, 19 May 2008 14:06:30 +0100 Subject: [WATCHDOG 19/57] bfin: watchdog cleanup and unlocked_ioctl Scan, tidy and check for unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/bfin_wdt.c | 147 +++++++++++++++++++++----------------------- 1 file changed, 71 insertions(+), 76 deletions(-) diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index 03b3e3d91e7c..2b92818cc664 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args) #define stampit() stamp("here i am") @@ -148,7 +148,8 @@ static int bfin_wdt_set_timeout(unsigned long t) int run = bfin_wdt_running(); bfin_wdt_stop(); bfin_write_WDOG_CNT(cnt); - if (run) bfin_wdt_start(); + if (run) + bfin_wdt_start(); } spin_unlock_irqrestore(&bfin_wdt_spinlock, flags); @@ -191,16 +192,15 @@ static int bfin_wdt_release(struct inode *inode, struct file *file) { stampit(); - if (expect_close == 42) { + if (expect_close == 42) bfin_wdt_stop(); - } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + else { + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); bfin_wdt_keepalive(); } - expect_close = 0; clear_bit(0, &open_check); - return 0; } @@ -214,7 +214,7 @@ static int bfin_wdt_release(struct inode *inode, struct file *file) * Pings the watchdog on write. */ static ssize_t bfin_wdt_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) + size_t len, loff_t *ppos) { stampit(); @@ -241,7 +241,6 @@ static ssize_t bfin_wdt_write(struct file *file, const char __user *data, /** * bfin_wdt_ioctl - Query Device - * @inode: inode of device * @file: file handle of device * @cmd: watchdog command * @arg: argument @@ -249,8 +248,8 @@ static ssize_t bfin_wdt_write(struct file *file, const char __user *data, * Query basic information from the device or ping it, as outlined by the * watchdog API. */ -static int bfin_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long bfin_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -258,59 +257,49 @@ static int bfin_wdt_ioctl(struct inode *inode, struct file *file, stampit(); switch (cmd) { - default: - return -ENOTTY; - - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &bfin_wdt_info, sizeof(bfin_wdt_info))) - return -EFAULT; - else - return 0; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(!!(_bfin_swrst & SWRST_RESET_WDOG), p); - - case WDIOC_KEEPALIVE: - bfin_wdt_keepalive(); + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &bfin_wdt_info, sizeof(bfin_wdt_info))) + return -EFAULT; + else return 0; - - case WDIOC_SETTIMEOUT: { - int new_timeout; - - if (get_user(new_timeout, p)) - return -EFAULT; - - if (bfin_wdt_set_timeout(new_timeout)) - return -EINVAL; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(!!(_bfin_swrst & SWRST_RESET_WDOG), p); + case WDIOC_KEEPALIVE: + bfin_wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: { + int new_timeout; + + if (get_user(new_timeout, p)) + return -EFAULT; + if (bfin_wdt_set_timeout(new_timeout)) + return -EINVAL; + } + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + case WDIOC_SETOPTIONS: { + unsigned long flags; + int options, ret = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + + spin_lock_irqsave(&bfin_wdt_spinlock, flags); + if (options & WDIOS_DISABLECARD) { + bfin_wdt_stop(); + ret = 0; } - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); - - case WDIOC_SETOPTIONS: { - unsigned long flags; - int options, ret = -EINVAL; - - if (get_user(options, p)) - return -EFAULT; - - spin_lock_irqsave(&bfin_wdt_spinlock, flags); - - if (options & WDIOS_DISABLECARD) { - bfin_wdt_stop(); - ret = 0; - } - - if (options & WDIOS_ENABLECARD) { - bfin_wdt_start(); - ret = 0; - } - - spin_unlock_irqrestore(&bfin_wdt_spinlock, flags); - - return ret; + if (options & WDIOS_ENABLECARD) { + bfin_wdt_start(); + ret = 0; } + spin_unlock_irqrestore(&bfin_wdt_spinlock, flags); + return ret; + } + default: + return -ENOTTY; } } @@ -323,8 +312,8 @@ static int bfin_wdt_ioctl(struct inode *inode, struct file *file, * Handles specific events, such as turning off the watchdog during a * shutdown event. */ -static int bfin_wdt_notify_sys(struct notifier_block *this, unsigned long code, - void *unused) +static int bfin_wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) { stampit(); @@ -379,12 +368,12 @@ static int bfin_wdt_resume(struct platform_device *pdev) #endif static const struct file_operations bfin_wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = bfin_wdt_write, - .ioctl = bfin_wdt_ioctl, - .open = bfin_wdt_open, - .release = bfin_wdt_release, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = bfin_wdt_write, + .unlocked_ioctl = bfin_wdt_ioctl, + .open = bfin_wdt_open, + .release = bfin_wdt_release, }; static struct miscdevice bfin_wdt_miscdev = { @@ -396,8 +385,8 @@ static struct miscdevice bfin_wdt_miscdev = { static struct watchdog_info bfin_wdt_info = { .identity = "Blackfin Watchdog", .options = WDIOF_SETTIMEOUT | - WDIOF_KEEPALIVEPING | - WDIOF_MAGICCLOSE, + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, }; static struct notifier_block bfin_wdt_notifier = { @@ -416,14 +405,16 @@ static int __devinit bfin_wdt_probe(struct platform_device *pdev) ret = register_reboot_notifier(&bfin_wdt_notifier); if (ret) { - pr_devinit(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret); + pr_devinit(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", ret); return ret; } ret = misc_register(&bfin_wdt_miscdev); if (ret) { - pr_devinit(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_devinit(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); unregister_reboot_notifier(&bfin_wdt_notifier); return ret; } @@ -516,7 +507,11 @@ MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); module_param(timeout, uint, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -- cgit v1.2.3 From 00e9c2059aba0a0d67d144229bac82d403c2f42a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:36 +0100 Subject: [WATCHDOG 20/57] booke watchdog: clean up and unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/booke_wdt.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index c1ba0db48501..4c423d531a89 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -18,9 +18,9 @@ #include #include #include +#include #include -#include #include /* If the kernel parameter wdt=1, the watchdog will be enabled at boot. @@ -32,7 +32,7 @@ */ #ifdef CONFIG_FSL_BOOKE -#define WDT_PERIOD_DEFAULT 63 /* Ex. wdt_period=28 bus=333Mhz , reset=~40sec */ +#define WDT_PERIOD_DEFAULT 63 /* Ex. wdt_period=28 bus=333Mhz,reset=~40sec */ #else #define WDT_PERIOD_DEFAULT 3 /* Refer to the PPC40x and PPC4xx manuals */ #endif /* for timing information */ @@ -82,16 +82,15 @@ static struct watchdog_info ident = { .identity = "PowerPC Book-E Watchdog", }; -static int booke_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long booke_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { u32 tmp = 0; u32 __user *p = (u32 __user *)arg; switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user((struct watchdog_info __user *)arg, &ident, - sizeof(struct watchdog_info))) + if (copy_to_user(arg, &ident, sizeof(struct watchdog_info))) return -EFAULT; case WDIOC_GETSTATUS: return put_user(ident.options, p); @@ -106,7 +105,8 @@ static int booke_wdt_ioctl(struct inode *inode, struct file *file, case WDIOC_SETTIMEOUT: if (get_user(booke_wdt_period, p)) return -EFAULT; - mtspr(SPRN_TCR, (mfspr(SPRN_TCR)&~WDTP(0))|WDTP(booke_wdt_period)); + mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WDTP(0)) | + WDTP(booke_wdt_period)); return 0; case WDIOC_GETTIMEOUT: return put_user(booke_wdt_period, p); @@ -132,8 +132,9 @@ static int booke_wdt_open(struct inode *inode, struct file *file) if (booke_wdt_enabled == 0) { booke_wdt_enabled = 1; on_each_cpu(__booke_wdt_enable, NULL, 0, 0); - printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled " - "(wdt_period=%d)\n", booke_wdt_period); + printk(KERN_INFO + "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n", + booke_wdt_period); } spin_unlock(&booke_wdt_lock); @@ -144,7 +145,7 @@ static const struct file_operations booke_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = booke_wdt_write, - .ioctl = booke_wdt_ioctl, + .unlocked_ioctl = booke_wdt_ioctl, .open = booke_wdt_open, }; @@ -175,8 +176,9 @@ static int __init booke_wdt_init(void) spin_lock(&booke_wdt_lock); if (booke_wdt_enabled == 1) { - printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled " - "(wdt_period=%d)\n", booke_wdt_period); + printk(KERN_INFO + "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n", + booke_wdt_period); on_each_cpu(__booke_wdt_enable, NULL, 0, 0); } spin_unlock(&booke_wdt_lock); -- cgit v1.2.3 From 640b4f685784feafcd99c24582c5eb3ea36c3c60 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:42 +0100 Subject: [WATCHDOG 21/57] ixp2000_wdt: clean up and unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ixp2000_wdt.c | 50 +++++++++++++++++++----------------------- 1 file changed, 23 insertions(+), 27 deletions(-) diff --git a/drivers/watchdog/ixp2000_wdt.c b/drivers/watchdog/ixp2000_wdt.c index dc7548dcaf35..943ceffbd683 100644 --- a/drivers/watchdog/ixp2000_wdt.c +++ b/drivers/watchdog/ixp2000_wdt.c @@ -25,42 +25,45 @@ #include #include #include +#include #include -#include static int nowayout = WATCHDOG_NOWAYOUT; static unsigned int heartbeat = 60; /* (secs) Default is 1 minute */ static unsigned long wdt_status; +static spinlock_t wdt_lock; #define WDT_IN_USE 0 #define WDT_OK_TO_CLOSE 1 static unsigned long wdt_tick_rate; -static void -wdt_enable(void) +static void wdt_enable(void) { + spin_lock(&wdt_lock); ixp2000_reg_write(IXP2000_RESET0, *(IXP2000_RESET0) | WDT_RESET_ENABLE); ixp2000_reg_write(IXP2000_TWDE, WDT_ENABLE); ixp2000_reg_write(IXP2000_T4_CLD, heartbeat * wdt_tick_rate); ixp2000_reg_write(IXP2000_T4_CTL, TIMER_DIVIDER_256 | TIMER_ENABLE); + spin_unlock(&wdt_lock); } -static void -wdt_disable(void) +static void wdt_disable(void) { + spin_lock(&wdt_lock); ixp2000_reg_write(IXP2000_T4_CTL, 0); + spin_unlock(&wdt_lock); } -static void -wdt_keepalive(void) +static void wdt_keepalive(void) { + spin_lock(&wdt_lock); ixp2000_reg_write(IXP2000_T4_CLD, heartbeat * wdt_tick_rate); + spin_unlock(&wdt_lock); } -static int -ixp2000_wdt_open(struct inode *inode, struct file *file) +static int ixp2000_wdt_open(struct inode *inode, struct file *file) { if (test_and_set_bit(WDT_IN_USE, &wdt_status)) return -EBUSY; @@ -72,8 +75,8 @@ ixp2000_wdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static ssize_t -ixp2000_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) +static ssize_t ixp2000_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { if (len) { if (!nowayout) { @@ -103,9 +106,8 @@ static struct watchdog_info ident = { .identity = "IXP2000 Watchdog", }; -static int -ixp2000_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long ixp2000_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int ret = -ENOTTY; int time; @@ -151,16 +153,13 @@ ixp2000_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, return ret; } -static int -ixp2000_wdt_release(struct inode *inode, struct file *file) +static int ixp2000_wdt_release(struct inode *inode, struct file *file) { - if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) { + if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) wdt_disable(); - } else { + else printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - " "timer will not stop\n"); - } - clear_bit(WDT_IN_USE, &wdt_status); clear_bit(WDT_OK_TO_CLOSE, &wdt_status); @@ -168,18 +167,16 @@ ixp2000_wdt_release(struct inode *inode, struct file *file) } -static const struct file_operations ixp2000_wdt_fops = -{ +static const struct file_operations ixp2000_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = ixp2000_wdt_write, - .ioctl = ixp2000_wdt_ioctl, + .unlocked_ioctl = ixp2000_wdt_ioctl, .open = ixp2000_wdt_open, .release = ixp2000_wdt_release, }; -static struct miscdevice ixp2000_wdt_miscdev = -{ +static struct miscdevice ixp2000_wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &ixp2000_wdt_fops, @@ -191,9 +188,8 @@ static int __init ixp2000_wdt_init(void) printk(KERN_INFO "Unable to use IXP2000 watchdog due to IXP2800 erratum #25.\n"); return -EIO; } - wdt_tick_rate = (*IXP2000_T1_CLD * HZ) / 256; - + spin_lock_init(&wdt_lock); return misc_register(&ixp2000_wdt_miscdev); } -- cgit v1.2.3 From 20d35f3e50ea7e573f9568b9fce4e98523aaee5d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:48 +0100 Subject: [WATCHDOG 22/57] ixp4xx_wdt: unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ixp4xx_wdt.c | 41 +++++++++++++++++------------------------ 1 file changed, 17 insertions(+), 24 deletions(-) diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c index 5864bb865cfe..24e624c847ae 100644 --- a/drivers/watchdog/ixp4xx_wdt.c +++ b/drivers/watchdog/ixp4xx_wdt.c @@ -30,40 +30,40 @@ static int nowayout = WATCHDOG_NOWAYOUT; static int heartbeat = 60; /* (secs) Default is 1 minute */ static unsigned long wdt_status; static unsigned long boot_status; +static spin_lock_t wdt_lock; #define WDT_TICK_RATE (IXP4XX_PERIPHERAL_BUS_CLOCK * 1000000UL) #define WDT_IN_USE 0 #define WDT_OK_TO_CLOSE 1 -static void -wdt_enable(void) +static void wdt_enable(void) { + spin_lock(&wdt_lock); *IXP4XX_OSWK = IXP4XX_WDT_KEY; *IXP4XX_OSWE = 0; *IXP4XX_OSWT = WDT_TICK_RATE * heartbeat; *IXP4XX_OSWE = IXP4XX_WDT_COUNT_ENABLE | IXP4XX_WDT_RESET_ENABLE; *IXP4XX_OSWK = 0; + spin_unlock(&wdt_lock); } -static void -wdt_disable(void) +static void wdt_disable(void) { + spin_lock(&wdt_lock); *IXP4XX_OSWK = IXP4XX_WDT_KEY; *IXP4XX_OSWE = 0; *IXP4XX_OSWK = 0; + spin_unlock(&wdt_lock); } -static int -ixp4xx_wdt_open(struct inode *inode, struct file *file) +static int ixp4xx_wdt_open(struct inode *inode, struct file *file) { if (test_and_set_bit(WDT_IN_USE, &wdt_status)) return -EBUSY; clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - wdt_enable(); - return nonseekable_open(inode, file); } @@ -87,7 +87,6 @@ ixp4xx_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) } wdt_enable(); } - return len; } @@ -98,9 +97,8 @@ static struct watchdog_info ident = { }; -static int -ixp4xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long ixp4xx_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int ret = -ENOTTY; int time; @@ -145,16 +143,13 @@ ixp4xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, return ret; } -static int -ixp4xx_wdt_release(struct inode *inode, struct file *file) +static int ixp4xx_wdt_release(struct inode *inode, struct file *file) { - if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) { + if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) wdt_disable(); - } else { + else printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - " "timer will not stop\n"); - } - clear_bit(WDT_IN_USE, &wdt_status); clear_bit(WDT_OK_TO_CLOSE, &wdt_status); @@ -167,7 +162,7 @@ static const struct file_operations ixp4xx_wdt_fops = .owner = THIS_MODULE, .llseek = no_llseek, .write = ixp4xx_wdt_write, - .ioctl = ixp4xx_wdt_ioctl, + .unlocked_ioctl = ixp4xx_wdt_ioctl, .open = ixp4xx_wdt_open, .release = ixp4xx_wdt_release, }; @@ -191,14 +186,12 @@ static int __init ixp4xx_wdt_init(void) return -ENODEV; } - + spin_lock_init(&wdt_lock); + boot_status = (*IXP4XX_OSST & IXP4XX_OSST_TIMER_WARM_RESET) ? + WDIOF_CARDRESET : 0; ret = misc_register(&ixp4xx_wdt_miscdev); if (ret == 0) printk("IXP4xx Watchdog Timer: heartbeat %d sec\n", heartbeat); - - boot_status = (*IXP4XX_OSST & IXP4XX_OSST_TIMER_WARM_RESET) ? - WDIOF_CARDRESET : 0; - return ret; } -- cgit v1.2.3 From f4fabce15bb9b547f934e2b6f0e5e01044108e4d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:53 +0100 Subject: [WATCHDOG 23/57] ks8695_wdt: clean up, coding style, unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ks8695_wdt.c | 119 ++++++++++++++++++++++-------------------- 1 file changed, 62 insertions(+), 57 deletions(-) diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c index df5a6b811ccd..6d052b80aa20 100644 --- a/drivers/watchdog/ks8695_wdt.c +++ b/drivers/watchdog/ks8695_wdt.c @@ -19,8 +19,8 @@ #include #include #include -#include -#include +#include +#include #include @@ -31,38 +31,44 @@ static int wdt_time = WDT_DEFAULT_TIME; static int nowayout = WATCHDOG_NOWAYOUT; module_param(wdt_time, int, 0); -MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="__MODULE_STRING(WDT_DEFAULT_TIME) ")"); +MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" + __MODULE_STRING(WDT_DEFAULT_TIME) ")"); #ifdef CONFIG_WATCHDOG_NOWAYOUT module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); #endif static unsigned long ks8695wdt_busy; +static spinlock_t ks8695_lock; /* ......................................................................... */ /* * Disable the watchdog. */ -static void inline ks8695_wdt_stop(void) +static inline void ks8695_wdt_stop(void) { unsigned long tmcon; + spin_lock(&ks8695_lock); /* disable timer0 */ tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + spin_unlock(&ks8695_lock); } /* * Enable and reset the watchdog. */ -static void inline ks8695_wdt_start(void) +static inline void ks8695_wdt_start(void) { unsigned long tmcon; unsigned long tval = wdt_time * CLOCK_TICK_RATE; + spin_lock(&ks8695_lock); /* disable timer0 */ tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); @@ -73,19 +79,22 @@ static void inline ks8695_wdt_start(void) /* re-enable timer0 */ tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); __raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + spin_unlock(&ks8695_lock); } /* * Reload the watchdog timer. (ie, pat the watchdog) */ -static void inline ks8695_wdt_reload(void) +static inline void ks8695_wdt_reload(void) { unsigned long tmcon; + spin_lock(&ks8695_lock); /* disable, then re-enable timer0 */ tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); __raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + spin_unlock(&ks8695_lock); } /* @@ -102,7 +111,8 @@ static int ks8695_wdt_settimeout(int new_time) if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) return -EINVAL; - /* Set new watchdog time. It will be used when ks8695_wdt_start() is called. */ + /* Set new watchdog time. It will be used when + ks8695_wdt_start() is called. */ wdt_time = new_time; return 0; } @@ -128,9 +138,9 @@ static int ks8695_wdt_open(struct inode *inode, struct file *file) */ static int ks8695_wdt_close(struct inode *inode, struct file *file) { + /* Disable the watchdog when file is closed */ if (!nowayout) - ks8695_wdt_stop(); /* Disable the watchdog when file is closed */ - + ks8695_wdt_stop(); clear_bit(0, &ks8695wdt_busy); return 0; } @@ -143,60 +153,52 @@ static struct watchdog_info ks8695_wdt_info = { /* * Handle commands from user-space. */ -static int ks8695_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ks8695_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; int new_value; - switch(cmd) { - case WDIOC_KEEPALIVE: - ks8695_wdt_reload(); /* pat the watchdog */ - return 0; - - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ks8695_wdt_info, sizeof(ks8695_wdt_info)) ? -EFAULT : 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_value, p)) - return -EFAULT; - - if (ks8695_wdt_settimeout(new_value)) - return -EINVAL; - - /* Enable new time value */ + switch (cmd) { + case WDIOC_KEEPALIVE: + ks8695_wdt_reload(); /* pat the watchdog */ + return 0; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ks8695_wdt_info, + sizeof(ks8695_wdt_info)) ? -EFAULT : 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + if (ks8695_wdt_settimeout(new_value)) + return -EINVAL; + /* Enable new time value */ + ks8695_wdt_start(); + /* Return current value */ + return put_user(wdt_time, p); + case WDIOC_GETTIMEOUT: + return put_user(wdt_time, p); + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_SETOPTIONS: + if (get_user(new_value, p)) + return -EFAULT; + if (new_value & WDIOS_DISABLECARD) + ks8695_wdt_stop(); + if (new_value & WDIOS_ENABLECARD) ks8695_wdt_start(); - - /* Return current value */ - return put_user(wdt_time, p); - - case WDIOC_GETTIMEOUT: - return put_user(wdt_time, p); - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_SETOPTIONS: - if (get_user(new_value, p)) - return -EFAULT; - - if (new_value & WDIOS_DISABLECARD) - ks8695_wdt_stop(); - if (new_value & WDIOS_ENABLECARD) - ks8695_wdt_start(); - return 0; - - default: - return -ENOTTY; + return 0; + default: + return -ENOTTY; } } /* * Pat the watchdog whenever device is written to. */ -static ssize_t ks8695_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) +static ssize_t ks8695_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { ks8695_wdt_reload(); /* pat the watchdog */ return len; @@ -207,7 +209,7 @@ static ssize_t ks8695_wdt_write(struct file *file, const char *data, size_t len, static const struct file_operations ks8695wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .ioctl = ks8695_wdt_ioctl, + .unlocked_ioctl = ks8695_wdt_ioctl, .open = ks8695_wdt_open, .release = ks8695_wdt_close, .write = ks8695_wdt_write, @@ -231,7 +233,8 @@ static int __init ks8695wdt_probe(struct platform_device *pdev) if (res) return res; - printk("KS8695 Watchdog Timer enabled (%d seconds%s)\n", wdt_time, nowayout ? ", nowayout" : ""); + printk(KERN_INFO "KS8695 Watchdog Timer enabled (%d seconds%s)\n", + wdt_time, nowayout ? ", nowayout" : ""); return 0; } @@ -285,12 +288,14 @@ static struct platform_driver ks8695wdt_driver = { static int __init ks8695_wdt_init(void) { - /* Check that the heartbeat value is within range; if not reset to the default */ + spin_lock_init(&ks8695_lock); + /* Check that the heartbeat value is within range; + if not reset to the default */ if (ks8695_wdt_settimeout(wdt_time)) { ks8695_wdt_settimeout(WDT_DEFAULT_TIME); - pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i, using %d\n", wdt_time, WDT_MAX_TIME); + pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i, using %d\n", + wdt_time, WDT_MAX_TIME); } - return platform_driver_register(&ks8695wdt_driver); } -- cgit v1.2.3 From 325ea4d3a8a90b19d7a076714d0f8f238a5a6a69 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:59 +0100 Subject: [WATCHDOG 24/57] machzwd: clean up, coding style, unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/machzwd.c | 108 +++++++++++++++++---------------------------- 1 file changed, 40 insertions(+), 68 deletions(-) diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c index 6905135a776c..2dfc27559bf7 100644 --- a/drivers/watchdog/machzwd.c +++ b/drivers/watchdog/machzwd.c @@ -40,9 +40,9 @@ #include #include #include +#include +#include -#include -#include #include /* ports */ @@ -95,7 +95,9 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); #define PFX "machzwd" @@ -114,7 +116,7 @@ static struct watchdog_info zf_info = { * 3 = GEN_SCI * defaults to GEN_RESET (0) */ -static int action = 0; +static int action; module_param(action, int, 0); MODULE_PARM_DESC(action, "after watchdog resets, generate: 0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI"); @@ -123,10 +125,9 @@ static void zf_ping(unsigned long data); static int zf_action = GEN_RESET; static unsigned long zf_is_open; static char zf_expect_close; -static DEFINE_SPINLOCK(zf_lock); static DEFINE_SPINLOCK(zf_port_lock); static DEFINE_TIMER(zf_timer, zf_ping, 0, 0); -static unsigned long next_heartbeat = 0; +static unsigned long next_heartbeat; /* timeout for user land heart beat (10 seconds) */ @@ -171,13 +172,13 @@ static inline void zf_set_control(unsigned short new) static inline void zf_set_timer(unsigned short new, unsigned char n) { - switch(n){ - case WD1: - zf_writew(COUNTER_1, new); - case WD2: - zf_writeb(COUNTER_2, new > 0xff ? 0xff : new); - default: - return; + switch (n) { + case WD1: + zf_writew(COUNTER_1, new); + case WD2: + zf_writeb(COUNTER_2, new > 0xff ? 0xff : new); + default: + return; } } @@ -241,10 +242,8 @@ static void zf_ping(unsigned long data) zf_writeb(COUNTER_2, 0xff); - if(time_before(jiffies, next_heartbeat)){ - + if (time_before(jiffies, next_heartbeat)) { dprintk("time_before: %ld\n", next_heartbeat - jiffies); - /* * reset event is activated by transition from 0 to 1 on * RESET_WD1 bit and we assume that it is already zero... @@ -261,24 +260,21 @@ static void zf_ping(unsigned long data) spin_unlock_irqrestore(&zf_port_lock, flags); mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO); - }else{ + } else printk(KERN_CRIT PFX ": I will reset your machine\n"); - } } static ssize_t zf_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { /* See if we got the magic character */ - if(count){ - + if (count) { /* * no need to check for close confirmation * no way to disable watchdog ;) */ if (!nowayout) { size_t ofs; - /* * note: just in case someone wrote the magic character * five months ago... @@ -286,11 +282,11 @@ static ssize_t zf_write(struct file *file, const char __user *buf, size_t count, zf_expect_close = 0; /* now scan */ - for (ofs = 0; ofs != count; ofs++){ + for (ofs = 0; ofs != count; ofs++) { char c; if (get_user(c, buf + ofs)) return -EFAULT; - if (c == 'V'){ + if (c == 'V') { zf_expect_close = 42; dprintk("zf_expect_close = 42\n"); } @@ -303,14 +299,11 @@ static ssize_t zf_write(struct file *file, const char __user *buf, size_t count, */ next_heartbeat = jiffies + ZF_USER_TIMEO; dprintk("user ping at %ld\n", jiffies); - } - return count; } -static int zf_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long zf_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -319,55 +312,38 @@ static int zf_ioctl(struct inode *inode, struct file *file, unsigned int cmd, if (copy_to_user(argp, &zf_info, sizeof(zf_info))) return -EFAULT; break; - case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: zf_ping(0); break; - default: return -ENOTTY; } - return 0; } static int zf_open(struct inode *inode, struct file *file) { - spin_lock(&zf_lock); - if(test_and_set_bit(0, &zf_is_open)) { - spin_unlock(&zf_lock); + if (test_and_set_bit(0, &zf_is_open)) return -EBUSY; - } - if (nowayout) __module_get(THIS_MODULE); - - spin_unlock(&zf_lock); - zf_timer_on(); - return nonseekable_open(inode, file); } static int zf_close(struct inode *inode, struct file *file) { - if(zf_expect_close == 42){ + if (zf_expect_close == 42) zf_timer_off(); - } else { + else { del_timer(&zf_timer); printk(KERN_ERR PFX ": device file closed unexpectedly. Will not stop the WDT!\n"); } - - spin_lock(&zf_lock); clear_bit(0, &zf_is_open); - spin_unlock(&zf_lock); - zf_expect_close = 0; - return 0; } @@ -378,23 +354,18 @@ static int zf_close(struct inode *inode, struct file *file) static int zf_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if(code == SYS_DOWN || code == SYS_HALT){ + if (code == SYS_DOWN || code == SYS_HALT) zf_timer_off(); - } - return NOTIFY_DONE; } - - - static const struct file_operations zf_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = zf_write, - .ioctl = zf_ioctl, - .open = zf_open, - .release = zf_close, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = zf_write, + .unlocked_ioctl = zf_ioctl, + .open = zf_open, + .release = zf_close, }; static struct miscdevice zf_miscdev = { @@ -402,7 +373,7 @@ static struct miscdevice zf_miscdev = { .name = "watchdog", .fops = &zf_fops, }; - + /* * The device needs to learn about soft shutdowns in order to @@ -423,22 +394,23 @@ static int __init zf_init(void) { int ret; - printk(KERN_INFO PFX ": MachZ ZF-Logic Watchdog driver initializing.\n"); + printk(KERN_INFO PFX + ": MachZ ZF-Logic Watchdog driver initializing.\n"); ret = zf_get_ZFL_version(); - if ((!ret) || (ret == 0xffff)) { + if (!ret || ret == 0xffff) { printk(KERN_WARNING PFX ": no ZF-Logic found\n"); return -ENODEV; } - if((action <= 3) && (action >= 0)){ - zf_action = zf_action>>action; - } else + if (action <= 3 && action >= 0) + zf_action = zf_action >> action; + else action = 0; zf_show_action(action); - if(!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")){ + if (!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")) { printk(KERN_ERR "cannot reserve I/O ports at %d\n", ZF_IOBASE); ret = -EBUSY; @@ -446,14 +418,14 @@ static int __init zf_init(void) } ret = register_reboot_notifier(&zf_notifier); - if(ret){ + if (ret) { printk(KERN_ERR "can't register reboot notifier (err=%d)\n", ret); goto no_reboot; } ret = misc_register(&zf_miscdev); - if (ret){ + if (ret) { printk(KERN_ERR "can't misc_register on minor=%d\n", WATCHDOG_MINOR); goto no_misc; -- cgit v1.2.3 From 3930964532f8e454910cbe0d9909e98a02d9f552 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:04 +0100 Subject: [WATCHDOG 25/57] mixcomwd: coding style locking, unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/mixcomwd.c | 133 +++++++++++++++++++++----------------------- 1 file changed, 63 insertions(+), 70 deletions(-) diff --git a/drivers/watchdog/mixcomwd.c b/drivers/watchdog/mixcomwd.c index 1adf1d56027d..2248a8187590 100644 --- a/drivers/watchdog/mixcomwd.c +++ b/drivers/watchdog/mixcomwd.c @@ -29,7 +29,8 @@ * - support for one more type board * * Version 0.5 (2001/12/14) Matt Domsch - * - added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * - added nowayout module option to override + * CONFIG_WATCHDOG_NOWAYOUT * * Version 0.6 (2002/04/12): Rob Radez * - make mixcomwd_opened unsigned, @@ -53,8 +54,8 @@ #include #include #include -#include -#include +#include +#include /* * We have two types of cards that can be probed: @@ -108,18 +109,19 @@ static char expect_close; static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static void mixcomwd_ping(void) { - outb_p(55,watchdog_port); + outb_p(55, watchdog_port); return; } static void mixcomwd_timerfun(unsigned long d) { mixcomwd_ping(); - mod_timer(&mixcomwd_timer, jiffies + 5 * HZ); } @@ -129,22 +131,22 @@ static void mixcomwd_timerfun(unsigned long d) static int mixcomwd_open(struct inode *inode, struct file *file) { - if(test_and_set_bit(0,&mixcomwd_opened)) { + if (test_and_set_bit(0, &mixcomwd_opened)) return -EBUSY; - } + mixcomwd_ping(); - if (nowayout) { + if (nowayout) /* * fops_get() code via open() has already done * a try_module_get() so it is safe to do the * __module_get(). */ __module_get(THIS_MODULE); - } else { - if(mixcomwd_timer_alive) { + else { + if (mixcomwd_timer_alive) { del_timer(&mixcomwd_timer); - mixcomwd_timer_alive=0; + mixcomwd_timer_alive = 0; } } return nonseekable_open(inode, file); @@ -153,26 +155,27 @@ static int mixcomwd_open(struct inode *inode, struct file *file) static int mixcomwd_release(struct inode *inode, struct file *file) { if (expect_close == 42) { - if(mixcomwd_timer_alive) { - printk(KERN_ERR PFX "release called while internal timer alive"); + if (mixcomwd_timer_alive) { + printk(KERN_ERR PFX + "release called while internal timer alive"); return -EBUSY; } - mixcomwd_timer_alive=1; + mixcomwd_timer_alive = 1; mod_timer(&mixcomwd_timer, jiffies + 5 * HZ); - } else { - printk(KERN_CRIT PFX "WDT device closed unexpectedly. WDT will not stop!\n"); - } + } else + printk(KERN_CRIT PFX + "WDT device closed unexpectedly. WDT will not stop!\n"); - clear_bit(0,&mixcomwd_opened); - expect_close=0; + clear_bit(0, &mixcomwd_opened); + expect_close = 0; return 0; } -static ssize_t mixcomwd_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) +static ssize_t mixcomwd_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { - if(len) - { + if (len) { if (!nowayout) { size_t i; @@ -192,8 +195,8 @@ static ssize_t mixcomwd_write(struct file *file, const char __user *data, size_t return len; } -static int mixcomwd_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long mixcomwd_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -204,32 +207,23 @@ static int mixcomwd_ioctl(struct inode *inode, struct file *file, .identity = "MixCOM watchdog", }; - switch(cmd) - { - case WDIOC_GETSTATUS: - status=mixcomwd_opened; - if (!nowayout) { - status|=mixcomwd_timer_alive; - } - if (copy_to_user(p, &status, sizeof(int))) { - return -EFAULT; - } - break; - case WDIOC_GETBOOTSTATUS: - if (copy_to_user(p, &status, sizeof(int))) { - return -EFAULT; - } - break; - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof(ident))) { - return -EFAULT; - } - break; - case WDIOC_KEEPALIVE: - mixcomwd_ping(); - break; - default: - return -ENOTTY; + switch (cmd) { + case WDIOC_GETSTATUS: + status = mixcomwd_opened; + if (!nowayout) + status |= mixcomwd_timer_alive; + return put_user(status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + case WDIOC_KEEPALIVE: + mixcomwd_ping(); + break; + default: + return -ENOTTY; } return 0; } @@ -238,7 +232,7 @@ static const struct file_operations mixcomwd_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = mixcomwd_write, - .ioctl = mixcomwd_ioctl, + .unlocked_ioctl = mixcomwd_ioctl, .open = mixcomwd_open, .release = mixcomwd_release, }; @@ -253,15 +247,14 @@ static int __init checkcard(int port, int card_id) { int id; - if (!request_region(port, 1, "MixCOM watchdog")) { + if (!request_region(port, 1, "MixCOM watchdog")) return 0; - } - id=inb_p(port); - if (card_id==MIXCOM_ID) + id = inb_p(port); + if (card_id == MIXCOM_ID) id &= 0x3f; - if (id!=card_id) { + if (id != card_id) { release_region(port, 1); return 0; } @@ -270,9 +263,7 @@ static int __init checkcard(int port, int card_id) static int __init mixcomwd_init(void) { - int i; - int ret; - int found=0; + int i, ret, found = 0; for (i = 0; !found && mixcomwd_io_info[i].ioport != 0; i++) { if (checkcard(mixcomwd_io_info[i].ioport, @@ -283,20 +274,22 @@ static int __init mixcomwd_init(void) } if (!found) { - printk(KERN_ERR PFX "No card detected, or port not available.\n"); + printk(KERN_ERR PFX + "No card detected, or port not available.\n"); return -ENODEV; } ret = misc_register(&mixcomwd_miscdev); - if (ret) - { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + if (ret) { + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto error_misc_register_watchdog; } - printk(KERN_INFO "MixCOM watchdog driver v%s, watchdog port at 0x%3x\n", - VERSION, watchdog_port); + printk(KERN_INFO + "MixCOM watchdog driver v%s, watchdog port at 0x%3x\n", + VERSION, watchdog_port); return 0; @@ -309,15 +302,15 @@ error_misc_register_watchdog: static void __exit mixcomwd_exit(void) { if (!nowayout) { - if(mixcomwd_timer_alive) { + if (mixcomwd_timer_alive) { printk(KERN_WARNING PFX "I quit now, hardware will" " probably reboot!\n"); del_timer_sync(&mixcomwd_timer); - mixcomwd_timer_alive=0; + mixcomwd_timer_alive = 0; } } misc_deregister(&mixcomwd_miscdev); - release_region(watchdog_port,1); + release_region(watchdog_port, 1); } module_init(mixcomwd_init); -- cgit v1.2.3 From f26ef3dc69467e135e2b9555e44a088aee5c7d8f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:09 +0100 Subject: [WATCHDOG 26/57] mpc watchdog: clean up and locking Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/mpc5200_wdt.c | 20 ++++++++++++-------- drivers/watchdog/mpc83xx_wdt.c | 19 ++++++++++--------- drivers/watchdog/mpc8xx_wdt.c | 37 +++++++++++++++++++------------------ 3 files changed, 41 insertions(+), 35 deletions(-) diff --git a/drivers/watchdog/mpc5200_wdt.c b/drivers/watchdog/mpc5200_wdt.c index 80a91d4cea11..ce1811d5d6b1 100644 --- a/drivers/watchdog/mpc5200_wdt.c +++ b/drivers/watchdog/mpc5200_wdt.c @@ -4,8 +4,8 @@ #include #include #include -#include -#include +#include +#include #include @@ -57,7 +57,8 @@ static int mpc5200_wdt_start(struct mpc5200_wdt *wdt) /* set timeout, with maximum prescaler */ out_be32(&wdt->regs->count, 0x0 | wdt->count); /* enable watchdog */ - out_be32(&wdt->regs->mode, GPT_MODE_CE | GPT_MODE_WDT | GPT_MODE_MS_TIMER); + out_be32(&wdt->regs->mode, GPT_MODE_CE | GPT_MODE_WDT | + GPT_MODE_MS_TIMER); spin_unlock(&wdt->io_lock); return 0; @@ -66,7 +67,8 @@ static int mpc5200_wdt_ping(struct mpc5200_wdt *wdt) { spin_lock(&wdt->io_lock); /* writing A5 to OCPW resets the watchdog */ - out_be32(&wdt->regs->mode, 0xA5000000 | (0xffffff & in_be32(&wdt->regs->mode))); + out_be32(&wdt->regs->mode, 0xA5000000 | + (0xffffff & in_be32(&wdt->regs->mode))); spin_unlock(&wdt->io_lock); return 0; } @@ -92,8 +94,8 @@ static struct watchdog_info mpc5200_wdt_info = { .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, .identity = "mpc5200 watchdog on GPT0", }; -static int mpc5200_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long mpc5200_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { struct mpc5200_wdt *wdt = file->private_data; int __user *data = (int __user *)arg; @@ -103,7 +105,7 @@ static int mpc5200_wdt_ioctl(struct inode *inode, struct file *file, switch (cmd) { case WDIOC_GETSUPPORT: ret = copy_to_user(data, &mpc5200_wdt_info, - sizeof(mpc5200_wdt_info)); + sizeof(mpc5200_wdt_info)); if (ret) ret = -EFAULT; break; @@ -135,6 +137,7 @@ static int mpc5200_wdt_ioctl(struct inode *inode, struct file *file, } return ret; } + static int mpc5200_wdt_open(struct inode *inode, struct file *file) { /* /dev/watchdog can only be opened once */ @@ -167,7 +170,8 @@ static const struct file_operations mpc5200_wdt_fops = { }; /* module operations */ -static int mpc5200_wdt_probe(struct of_device *op, const struct of_device_id *match) +static int mpc5200_wdt_probe(struct of_device *op, + const struct of_device_id *match) { struct mpc5200_wdt *wdt; int err; diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc83xx_wdt.c index b16c5cd972eb..109eea0df2d0 100644 --- a/drivers/watchdog/mpc83xx_wdt.c +++ b/drivers/watchdog/mpc83xx_wdt.c @@ -22,8 +22,8 @@ #include #include #include -#include -#include +#include +#include struct mpc83xx_wdt { __be32 res0; @@ -42,11 +42,13 @@ static struct mpc83xx_wdt __iomem *wd_base; static u16 timeout = 0xffff; module_param(timeout, ushort, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in ticks. (0start, sizeof (struct mpc83xx_wdt)); - + wd_base = ioremap(r->start, sizeof(struct mpc83xx_wdt)); if (wd_base == NULL) { ret = -ENOMEM; goto err_out; diff --git a/drivers/watchdog/mpc8xx_wdt.c b/drivers/watchdog/mpc8xx_wdt.c index 85b5734403a5..1336425acf20 100644 --- a/drivers/watchdog/mpc8xx_wdt.c +++ b/drivers/watchdog/mpc8xx_wdt.c @@ -16,36 +16,35 @@ #include #include #include -#include -#include +#include +#include #include static unsigned long wdt_opened; static int wdt_status; +static spinlock_t wdt_lock; static void mpc8xx_wdt_handler_disable(void) { volatile uint __iomem *piscr; - piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr; + piscr = (uint *)&((immap_t *)IMAP_ADDR)->im_sit.sit_piscr; if (!m8xx_has_internal_rtc) m8xx_wdt_stop_timer(); else out_be32(piscr, in_be32(piscr) & ~(PISCR_PIE | PISCR_PTE)); - printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler deactivated\n"); } static void mpc8xx_wdt_handler_enable(void) { volatile uint __iomem *piscr; - piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr; + piscr = (uint *)&((immap_t *)IMAP_ADDR)->im_sit.sit_piscr; if (!m8xx_has_internal_rtc) m8xx_wdt_install_timer(); else out_be32(piscr, in_be32(piscr) | PISCR_PIE | PISCR_PTE); - printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler activated\n"); } @@ -53,37 +52,34 @@ static int mpc8xx_wdt_open(struct inode *inode, struct file *file) { if (test_and_set_bit(0, &wdt_opened)) return -EBUSY; - m8xx_wdt_reset(); mpc8xx_wdt_handler_disable(); - return nonseekable_open(inode, file); } static int mpc8xx_wdt_release(struct inode *inode, struct file *file) { m8xx_wdt_reset(); - #if !defined(CONFIG_WATCHDOG_NOWAYOUT) mpc8xx_wdt_handler_enable(); #endif - clear_bit(0, &wdt_opened); - return 0; } -static ssize_t mpc8xx_wdt_write(struct file *file, const char *data, size_t len, - loff_t * ppos) +static ssize_t mpc8xx_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { - if (len) + if (len) { + spin_lock(&wdt_lock); m8xx_wdt_reset(); - + spin_unlock(&wdt_lock); + } return len; } -static int mpc8xx_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long mpc8xx_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { int timeout; static struct watchdog_info info = { @@ -112,15 +108,19 @@ static int mpc8xx_wdt_ioctl(struct inode *inode, struct file *file, return -EOPNOTSUPP; case WDIOC_KEEPALIVE: + spin_lock(&wdt_lock); m8xx_wdt_reset(); wdt_status |= WDIOF_KEEPALIVEPING; + spin_unlock(&wdt_lock); break; case WDIOC_SETTIMEOUT: return -EOPNOTSUPP; case WDIOC_GETTIMEOUT: + spin_lock(&wdt_lock); timeout = m8xx_wdt_get_timeout(); + spin_unlock(&wdt_lock); if (put_user(timeout, (int *)arg)) return -EFAULT; break; @@ -136,7 +136,7 @@ static const struct file_operations mpc8xx_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = mpc8xx_wdt_write, - .ioctl = mpc8xx_wdt_ioctl, + .unlocked_ioctl = mpc8xx_wdt_ioctl, .open = mpc8xx_wdt_open, .release = mpc8xx_wdt_release, }; @@ -149,6 +149,7 @@ static struct miscdevice mpc8xx_wdt_miscdev = { static int __init mpc8xx_wdt_init(void) { + spin_lock_init(&wdt_lock); return misc_register(&mpc8xx_wdt_miscdev); } -- cgit v1.2.3 From 83ab1a53f219c8139199633f60ab0ef88ef18c54 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:15 +0100 Subject: [WATCHDOG 27/57] mpcore watchdog: unlocked_ioctl and BKl work Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/mpcore_wdt.c | 53 ++++++++++++++++++++++++++----------------- 1 file changed, 32 insertions(+), 21 deletions(-) diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c index 009573b81496..5e58f8b73d00 100644 --- a/drivers/watchdog/mpcore_wdt.c +++ b/drivers/watchdog/mpcore_wdt.c @@ -29,9 +29,9 @@ #include #include #include +#include #include -#include struct mpcore_wdt { unsigned long timer_alive; @@ -43,17 +43,20 @@ struct mpcore_wdt { }; static struct platform_device *mpcore_wdt_dev; - extern unsigned int mpcore_timer_rate; #define TIMER_MARGIN 60 static int mpcore_margin = TIMER_MARGIN; module_param(mpcore_margin, int, 0); -MODULE_PARM_DESC(mpcore_margin, "MPcore timer margin in seconds. (0base + TWD_WDOG_INTSTAT)) { - dev_printk(KERN_CRIT, wdt->dev, "Triggered - Reboot ignored.\n"); - + dev_printk(KERN_CRIT, wdt->dev, + "Triggered - Reboot ignored.\n"); /* Clear the interrupt on the watchdog */ writel(1, wdt->base + TWD_WDOG_INTSTAT); - return IRQ_HANDLED; } - return IRQ_NONE; } @@ -96,22 +97,26 @@ static void mpcore_wdt_keepalive(struct mpcore_wdt *wdt) count = (mpcore_timer_rate / 256) * mpcore_margin; /* Reload the counter */ + spin_lock(&wdt_lock); writel(count + wdt->perturb, wdt->base + TWD_WDOG_LOAD); - wdt->perturb = wdt->perturb ? 0 : 1; + spin_unlock(&wdt_lock); } static void mpcore_wdt_stop(struct mpcore_wdt *wdt) { + spin_lock(&wdt_lock); writel(0x12345678, wdt->base + TWD_WDOG_DISABLE); writel(0x87654321, wdt->base + TWD_WDOG_DISABLE); writel(0x0, wdt->base + TWD_WDOG_CONTROL); + spin_unlock(&wdt_lock); } static void mpcore_wdt_start(struct mpcore_wdt *wdt) { dev_printk(KERN_INFO, wdt->dev, "enabling watchdog.\n"); + spin_lock(&wdt_lock); /* This loads the count register but does NOT start the count yet */ mpcore_wdt_keepalive(wdt); @@ -122,6 +127,7 @@ static void mpcore_wdt_start(struct mpcore_wdt *wdt) /* Enable watchdog - prescale=256, watchdog mode=1, enable=1 */ writel(0x0000FF09, wdt->base + TWD_WDOG_CONTROL); } + spin_unlock(&wdt_lock); } static int mpcore_wdt_set_heartbeat(int t) @@ -164,10 +170,11 @@ static int mpcore_wdt_release(struct inode *inode, struct file *file) * Shut off the timer. * Lock it in if it's a module and we set nowayout */ - if (wdt->expect_close == 42) { + if (wdt->expect_close == 42) mpcore_wdt_stop(wdt); - } else { - dev_printk(KERN_CRIT, wdt->dev, "unexpected close, not stopping watchdog!\n"); + else { + dev_printk(KERN_CRIT, wdt->dev, + "unexpected close, not stopping watchdog!\n"); mpcore_wdt_keepalive(wdt); } clear_bit(0, &wdt->timer_alive); @@ -175,7 +182,8 @@ static int mpcore_wdt_release(struct inode *inode, struct file *file) return 0; } -static ssize_t mpcore_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) +static ssize_t mpcore_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { struct mpcore_wdt *wdt = file->private_data; @@ -210,8 +218,8 @@ static struct watchdog_info ident = { .identity = "MPcore Watchdog", }; -static int mpcore_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long mpcore_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { struct mpcore_wdt *wdt = file->private_data; int ret; @@ -301,7 +309,7 @@ static const struct file_operations mpcore_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = mpcore_wdt_write, - .ioctl = mpcore_wdt_ioctl, + .unlocked_ioctl = mpcore_wdt_ioctl, .open = mpcore_wdt_open, .release = mpcore_wdt_release, }; @@ -349,14 +357,17 @@ static int __devinit mpcore_wdt_probe(struct platform_device *dev) mpcore_wdt_miscdev.parent = &dev->dev; ret = misc_register(&mpcore_wdt_miscdev); if (ret) { - dev_printk(KERN_ERR, _dev, "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + dev_printk(KERN_ERR, _dev, + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto err_misc; } - ret = request_irq(wdt->irq, mpcore_wdt_fire, IRQF_DISABLED, "mpcore_wdt", wdt); + ret = request_irq(wdt->irq, mpcore_wdt_fire, IRQF_DISABLED, + "mpcore_wdt", wdt); if (ret) { - dev_printk(KERN_ERR, _dev, "cannot register IRQ%d for watchdog\n", wdt->irq); + dev_printk(KERN_ERR, _dev, + "cannot register IRQ%d for watchdog\n", wdt->irq); goto err_irq; } @@ -415,7 +426,7 @@ static int __init mpcore_wdt_init(void) */ if (mpcore_wdt_set_heartbeat(mpcore_margin)) { mpcore_wdt_set_heartbeat(TIMER_MARGIN); - printk(KERN_INFO "mpcore_margin value must be 0 Date: Mon, 19 May 2008 14:07:21 +0100 Subject: [WATCHDOG 28/57] mtx-1_wdt: clean up, coding style, unlocked ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/mtx-1_wdt.c | 107 +++++++++++++++++++++---------------------- 1 file changed, 52 insertions(+), 55 deletions(-) diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index a8e67383784e..e0b8cdfa5e70 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -1,7 +1,8 @@ /* * Driver for the MTX-1 Watchdog. * - * (C) Copyright 2005 4G Systems , All Rights Reserved. + * (C) Copyright 2005 4G Systems , + * All Rights Reserved. * http://www.4g-systems.biz * * (C) Copyright 2007 OpenWrt.org, Florian Fainelli @@ -46,12 +47,11 @@ #include #include #include - -#include -#include +#include +#include +#include #include -#include #define MTX1_WDT_INTERVAL (5 * HZ) @@ -59,6 +59,7 @@ static int ticks = 100 * HZ; static struct { struct completion stop; + spinlock_t lock; int running; struct timer_list timer; int queue; @@ -71,6 +72,7 @@ static void mtx1_wdt_trigger(unsigned long unused) { u32 tmp; + spin_lock(&mtx1_wdt_device.lock); if (mtx1_wdt_device.running) ticks--; /* @@ -79,13 +81,13 @@ static void mtx1_wdt_trigger(unsigned long unused) tmp = au_readl(GPIO2_DIR); tmp = (tmp & ~(1 << mtx1_wdt_device.gpio)) | ((~tmp) & (1 << mtx1_wdt_device.gpio)); - au_writel (tmp, GPIO2_DIR); + au_writel(tmp, GPIO2_DIR); if (mtx1_wdt_device.queue && ticks) mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL); - else { + else complete(&mtx1_wdt_device.stop); - } + spin_unlock(&mtx1_wdt_device.lock); } static void mtx1_wdt_reset(void) @@ -96,23 +98,25 @@ static void mtx1_wdt_reset(void) static void mtx1_wdt_start(void) { + spin_lock_irqsave(&mtx1_wdt_device.lock, flags); if (!mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 1; gpio_set_value(mtx1_wdt_device.gpio, 1); mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL); } mtx1_wdt_device.running++; + spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags); } static int mtx1_wdt_stop(void) { + spin_lock_irqsave(&mtx1_wdt_device.lock, flags); if (mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 0; gpio_set_value(mtx1_wdt_device.gpio, 0); } - ticks = mtx1_wdt_device.default_ticks; - + spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags); return 0; } @@ -122,7 +126,6 @@ static int mtx1_wdt_open(struct inode *inode, struct file *file) { if (test_and_set_bit(0, &mtx1_wdt_device.inuse)) return -EBUSY; - return nonseekable_open(inode, file); } @@ -133,54 +136,51 @@ static int mtx1_wdt_release(struct inode *inode, struct file *file) return 0; } -static int mtx1_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long mtx1_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; + int __user *p = (int __user *)argp; unsigned int value; - static struct watchdog_info ident = - { + static const struct watchdog_info ident = { .options = WDIOF_CARDRESET, .identity = "MTX-1 WDT", }; - switch(cmd) { - case WDIOC_KEEPALIVE: - mtx1_wdt_reset(); - break; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - if ( copy_to_user(argp, &value, sizeof(int)) ) - return -EFAULT; - break; - case WDIOC_GETSUPPORT: - if ( copy_to_user(argp, &ident, sizeof(ident)) ) - return -EFAULT; - break; - case WDIOC_SETOPTIONS: - if ( copy_from_user(&value, argp, sizeof(int)) ) - return -EFAULT; - switch(value) { - case WDIOS_ENABLECARD: - mtx1_wdt_start(); - break; - case WDIOS_DISABLECARD: - return mtx1_wdt_stop(); - default: - return -EINVAL; - } - break; - default: - return -ENOTTY; + switch (cmd) { + case WDIOC_KEEPALIVE: + mtx1_wdt_reset(); + break; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + put_user(0, p); + break; + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + case WDIOC_SETOPTIONS: + if (get_user(value, p)) + return -EFAULT; + if (value & WDIOS_ENABLECARD) + mtx1_wdt_start(); + else if (value & WDIOS_DISABLECARD) + mtx1_wdt_stop(); + else + return -EINVAL; + return 0; + default: + return -ENOTTY; } return 0; } -static ssize_t mtx1_wdt_write(struct file *file, const char *buf, size_t count, loff_t *ppos) +static ssize_t mtx1_wdt_write(struct file *file, const char *buf, + size_t count, loff_t *ppos) { if (!count) return -EIO; - mtx1_wdt_reset(); return count; } @@ -188,7 +188,7 @@ static ssize_t mtx1_wdt_write(struct file *file, const char *buf, size_t count, static const struct file_operations mtx1_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .ioctl = mtx1_wdt_ioctl, + .unlocked_ioctl = mtx1_wdt_ioctl, .open = mtx1_wdt_open, .write = mtx1_wdt_write, .release = mtx1_wdt_release @@ -208,29 +208,26 @@ static int mtx1_wdt_probe(struct platform_device *pdev) mtx1_wdt_device.gpio = pdev->resource[0].start; - if ((ret = misc_register(&mtx1_wdt_misc)) < 0) { - printk(KERN_ERR " mtx-1_wdt : failed to register\n"); - return ret; - } - + spin_lock_init(&mtx1_wdt_device.lock); init_completion(&mtx1_wdt_device.stop); mtx1_wdt_device.queue = 0; - clear_bit(0, &mtx1_wdt_device.inuse); - setup_timer(&mtx1_wdt_device.timer, mtx1_wdt_trigger, 0L); - mtx1_wdt_device.default_ticks = ticks; + ret = misc_register(&mtx1_wdt_misc); + if (ret < 0) { + printk(KERN_ERR " mtx-1_wdt : failed to register\n"); + return ret; + } mtx1_wdt_start(); - printk(KERN_INFO "MTX-1 Watchdog driver\n"); - return 0; } static int mtx1_wdt_remove(struct platform_device *pdev) { + /* FIXME: do we need to lock this test ? */ if (mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 0; wait_for_completion(&mtx1_wdt_device.stop); -- cgit v1.2.3 From a86b849868f40f83781f7a7e32e5e5ef939dc570 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:26 +0100 Subject: [WATCHDOG 29/57] mv64x60_wdt: clean up and locking checks Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/mv64x60_wdt.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c index b59ca3273967..ac09fe4d9573 100644 --- a/drivers/watchdog/mv64x60_wdt.c +++ b/drivers/watchdog/mv64x60_wdt.c @@ -8,7 +8,7 @@ * and services the watchdog. * * Derived from mpc8xx_wdt.c, with the following copyright. - * + * * 2002 (c) Florian Schirmer This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express @@ -24,8 +24,8 @@ #include #include -#include -#include +#include +#include #define MV64x60_WDT_WDC_OFFSET 0 @@ -61,7 +61,9 @@ static DEFINE_SPINLOCK(mv64x60_wdt_spinlock); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static int mv64x60_wdt_toggle_wdc(int enabled_predicate, int field_shift) { @@ -150,7 +152,7 @@ static int mv64x60_wdt_release(struct inode *inode, struct file *file) } static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data, - size_t len, loff_t * ppos) + size_t len, loff_t *ppos) { if (len) { if (!nowayout) { @@ -160,7 +162,7 @@ static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data, for (i = 0; i != len; i++) { char c; - if(get_user(c, data + i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_close = 42; @@ -172,8 +174,8 @@ static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data, return len; } -static int mv64x60_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long mv64x60_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { int timeout; int options; @@ -240,7 +242,7 @@ static const struct file_operations mv64x60_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = mv64x60_wdt_write, - .ioctl = mv64x60_wdt_ioctl, + .unlocked_ioctl = mv64x60_wdt_ioctl, .open = mv64x60_wdt_open, .release = mv64x60_wdt_release, }; -- cgit v1.2.3 From 12b9df7d21d0eedfaaee925f8f9c9aafb1cafa2f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:32 +0100 Subject: [WATCHDOG 30/57] omap_wdt: locking, unlocked_ioctl, tidy Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/omap_wdt.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 74bc39aa1ce8..ccdf069792d9 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -41,9 +41,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include @@ -54,11 +54,12 @@ module_param(timer_margin, uint, 0); MODULE_PARM_DESC(timer_margin, "initial watchdog timeout (in seconds)"); static int omap_wdt_users; -static struct clk *armwdt_ck = NULL; -static struct clk *mpu_wdt_ick = NULL; -static struct clk *mpu_wdt_fck = NULL; +static struct clk *armwdt_ck; +static struct clk *mpu_wdt_ick; +static struct clk *mpu_wdt_fck; static unsigned int wdt_trgr_pattern = 0x1234; +static spinlock_t wdt_lock; static void omap_wdt_ping(void) { @@ -174,22 +175,23 @@ static int omap_wdt_release(struct inode *inode, struct file *file) return 0; } -static ssize_t -omap_wdt_write(struct file *file, const char __user *data, +static ssize_t omap_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) { /* Refresh LOAD_TIME. */ - if (len) + if (len) { + spin_lock(&wdt_lock); omap_wdt_ping(); + spin_unlock(&wdt_lock); + } return len; } -static int -omap_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long omap_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_margin; - static struct watchdog_info ident = { + static const struct watchdog_info ident = { .identity = "OMAP Watchdog", .options = WDIOF_SETTIMEOUT, .firmware_version = 0, @@ -211,18 +213,22 @@ omap_wdt_ioctl(struct inode *inode, struct file *file, return put_user(omap_prcm_get_reset_sources(), (int __user *)arg); case WDIOC_KEEPALIVE: + spin_lock(&wdt_lock); omap_wdt_ping(); + spin_unlock(&wdt_lock); return 0; case WDIOC_SETTIMEOUT: if (get_user(new_margin, (int __user *)arg)) return -EFAULT; omap_wdt_adjust_timeout(new_margin); + spin_lock(&wdt_lock); omap_wdt_disable(); omap_wdt_set_timeout(); omap_wdt_enable(); omap_wdt_ping(); + spin_unlock(&wdt_lock); /* Fall */ case WDIOC_GETTIMEOUT: return put_user(timer_margin, (int __user *)arg); @@ -232,7 +238,7 @@ omap_wdt_ioctl(struct inode *inode, struct file *file, static const struct file_operations omap_wdt_fops = { .owner = THIS_MODULE, .write = omap_wdt_write, - .ioctl = omap_wdt_ioctl, + .unlocked_ioctl = omap_wdt_ioctl, .open = omap_wdt_open, .release = omap_wdt_release, }; @@ -373,6 +379,7 @@ static struct platform_driver omap_wdt_driver = { static int __init omap_wdt_init(void) { + spin_lock_init(&wdt_lock); return platform_driver_register(&omap_wdt_driver); } -- cgit v1.2.3 From aee334c23c9a559ce6334bd6ba74a5708b600ada Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:37 +0100 Subject: [WATCHDOG 31/57] pc87413_wdt: clean up, coding style, unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/pc87413_wdt.c | 211 +++++++++++++++++------------------------ 1 file changed, 87 insertions(+), 124 deletions(-) diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c index 15e4f8887a9e..326f2d2ded3b 100644 --- a/drivers/watchdog/pc87413_wdt.c +++ b/drivers/watchdog/pc87413_wdt.c @@ -31,9 +31,9 @@ #include #include #include +#include +#include -#include -#include #include /* #define DEBUG 1 */ @@ -56,12 +56,12 @@ static int io = 0x2E; /* Address used on Portwell Boards */ -static int timeout = DEFAULT_TIMEOUT; /* timeout value */ -static unsigned long timer_enabled = 0; /* is the timer enabled? */ +static int timeout = DEFAULT_TIMEOUT; /* timeout value */ +static unsigned long timer_enabled; /* is the timer enabled? */ -static char expect_close; /* is the close expected? */ +static char expect_close; /* is the close expected? */ -static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */ +static DEFINE_SPINLOCK(io_lock); /* to guard us from io races */ static int nowayout = WATCHDOG_NOWAYOUT; @@ -69,7 +69,7 @@ static int nowayout = WATCHDOG_NOWAYOUT; /* Select pins for Watchdog output */ -static inline void pc87413_select_wdt_out (void) +static inline void pc87413_select_wdt_out(void) { unsigned int cr_data = 0; @@ -77,7 +77,7 @@ static inline void pc87413_select_wdt_out (void) outb_p(SIOCFG2, WDT_INDEX_IO_PORT); - cr_data = inb (WDT_DATA_IO_PORT); + cr_data = inb(WDT_DATA_IO_PORT); cr_data |= 0x80; /* Set Bit7 to 1*/ outb_p(SIOCFG2, WDT_INDEX_IO_PORT); @@ -85,8 +85,9 @@ static inline void pc87413_select_wdt_out (void) outb_p(cr_data, WDT_DATA_IO_PORT); #ifdef DEBUG - printk(KERN_INFO DPFX "Select multiple pin,pin55,as WDT output:" - " Bit7 to 1: %d\n", cr_data); + printk(KERN_INFO DPFX + "Select multiple pin,pin55,as WDT output: Bit7 to 1: %d\n", + cr_data); #endif } @@ -94,7 +95,7 @@ static inline void pc87413_select_wdt_out (void) static inline void pc87413_enable_swc(void) { - unsigned int cr_data=0; + unsigned int cr_data = 0; /* Step 2: Enable SWC functions */ @@ -129,12 +130,11 @@ static inline unsigned int pc87413_get_swc_base(void) addr_l = inb(WDT_DATA_IO_PORT); swc_base_addr = (addr_h << 8) + addr_l; - #ifdef DEBUG - printk(KERN_INFO DPFX "Read SWC I/O Base Address: low %d, high %d," - " res %d\n", addr_l, addr_h, swc_base_addr); + printk(KERN_INFO DPFX + "Read SWC I/O Base Address: low %d, high %d, res %d\n", + addr_l, addr_h, swc_base_addr); #endif - return swc_base_addr; } @@ -143,9 +143,7 @@ static inline unsigned int pc87413_get_swc_base(void) static inline void pc87413_swc_bank3(unsigned int swc_base_addr) { /* Step 4: Select Bank3 of SWC */ - outb_p(inb(swc_base_addr + 0x0f) | 0x03, swc_base_addr + 0x0f); - #ifdef DEBUG printk(KERN_INFO DPFX "Select Bank3 of SWC\n"); #endif @@ -157,9 +155,7 @@ static inline void pc87413_programm_wdto(unsigned int swc_base_addr, char pc87413_time) { /* Step 5: Programm WDTO, Twd. */ - outb_p(pc87413_time, swc_base_addr + WDTO); - #ifdef DEBUG printk(KERN_INFO DPFX "Set WDTO to %d minutes\n", pc87413_time); #endif @@ -170,9 +166,7 @@ static inline void pc87413_programm_wdto(unsigned int swc_base_addr, static inline void pc87413_enable_wden(unsigned int swc_base_addr) { /* Step 6: Enable WDEN */ - - outb_p(inb (swc_base_addr + WDCTL) | 0x01, swc_base_addr + WDCTL); - + outb_p(inb(swc_base_addr + WDCTL) | 0x01, swc_base_addr + WDCTL); #ifdef DEBUG printk(KERN_INFO DPFX "Enable WDEN\n"); #endif @@ -182,9 +176,7 @@ static inline void pc87413_enable_wden(unsigned int swc_base_addr) static inline void pc87413_enable_sw_wd_tren(unsigned int swc_base_addr) { /* Enable SW_WD_TREN */ - - outb_p(inb (swc_base_addr + WDCFG) | 0x80, swc_base_addr + WDCFG); - + outb_p(inb(swc_base_addr + WDCFG) | 0x80, swc_base_addr + WDCFG); #ifdef DEBUG printk(KERN_INFO DPFX "Enable SW_WD_TREN\n"); #endif @@ -195,9 +187,7 @@ static inline void pc87413_enable_sw_wd_tren(unsigned int swc_base_addr) static inline void pc87413_disable_sw_wd_tren(unsigned int swc_base_addr) { /* Disable SW_WD_TREN */ - - outb_p(inb (swc_base_addr + WDCFG) & 0x7f, swc_base_addr + WDCFG); - + outb_p(inb(swc_base_addr + WDCFG) & 0x7f, swc_base_addr + WDCFG); #ifdef DEBUG printk(KERN_INFO DPFX "pc87413 - Disable SW_WD_TREN\n"); #endif @@ -208,9 +198,7 @@ static inline void pc87413_disable_sw_wd_tren(unsigned int swc_base_addr) static inline void pc87413_enable_sw_wd_trg(unsigned int swc_base_addr) { /* Enable SW_WD_TRG */ - - outb_p(inb (swc_base_addr + WDCTL) | 0x80, swc_base_addr + WDCTL); - + outb_p(inb(swc_base_addr + WDCTL) | 0x80, swc_base_addr + WDCTL); #ifdef DEBUG printk(KERN_INFO DPFX "pc87413 - Enable SW_WD_TRG\n"); #endif @@ -221,9 +209,7 @@ static inline void pc87413_enable_sw_wd_trg(unsigned int swc_base_addr) static inline void pc87413_disable_sw_wd_trg(unsigned int swc_base_addr) { /* Disable SW_WD_TRG */ - - outb_p(inb (swc_base_addr + WDCTL) & 0x7f, swc_base_addr + WDCTL); - + outb_p(inb(swc_base_addr + WDCTL) & 0x7f, swc_base_addr + WDCTL); #ifdef DEBUG printk(KERN_INFO DPFX "Disable SW_WD_TRG\n"); #endif @@ -314,8 +300,8 @@ static int pc87413_open(struct inode *inode, struct file *file) /* Reload and activate timer */ pc87413_refresh(); - printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to" - " %d minute(s).\n", timeout); + printk(KERN_INFO MODNAME + "Watchdog enabled. Timeout set to %d minute(s).\n", timeout); return nonseekable_open(inode, file); } @@ -338,17 +324,15 @@ static int pc87413_release(struct inode *inode, struct file *file) if (expect_close == 42) { pc87413_disable(); - printk(KERN_INFO MODNAME "Watchdog disabled," - " sleeping again...\n"); + printk(KERN_INFO MODNAME + "Watchdog disabled, sleeping again...\n"); } else { - printk(KERN_CRIT MODNAME "Unexpected close, not stopping" - " watchdog!\n"); + printk(KERN_CRIT MODNAME + "Unexpected close, not stopping watchdog!\n"); pc87413_refresh(); } - clear_bit(0, &timer_enabled); expect_close = 0; - return 0; } @@ -386,7 +370,8 @@ static ssize_t pc87413_write(struct file *file, const char __user *data, /* reset expect flag */ expect_close = 0; - /* scan to see whether or not we got the magic character */ + /* scan to see whether or not we got the + magic character */ for (i = 0; i != len; i++) { char c; if (get_user(c, data+i)) @@ -404,7 +389,6 @@ static ssize_t pc87413_write(struct file *file, const char __user *data, /** * pc87413_ioctl: - * @inode: inode of the device * @file: file handle to the device * @cmd: watchdog command * @arg: argument pointer @@ -414,8 +398,8 @@ static ssize_t pc87413_write(struct file *file, const char __user *data, * querying capabilities and current status. */ -static int pc87413_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long pc87413_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_timeout; @@ -426,75 +410,58 @@ static int pc87413_ioctl(struct inode *inode, struct file *file, static struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING | - WDIOF_SETTIMEOUT | - WDIOF_MAGICCLOSE, + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "PC87413(HF/F) watchdog" }; uarg.i = (int __user *)arg; - switch(cmd) { - default: - return -ENOTTY; - - case WDIOC_GETSUPPORT: - return copy_to_user(uarg.ident, &ident, - sizeof(ident)) ? -EFAULT : 0; - - case WDIOC_GETSTATUS: - return put_user(pc87413_status(), uarg.i); - - case WDIOC_GETBOOTSTATUS: - return put_user(0, uarg.i); - - case WDIOC_KEEPALIVE: - pc87413_refresh(); + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(uarg.ident, &ident, + sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + return put_user(pc87413_status(), uarg.i); + case WDIOC_GETBOOTSTATUS: + return put_user(0, uarg.i); + case WDIOC_KEEPALIVE: + pc87413_refresh(); #ifdef DEBUG - printk(KERN_INFO DPFX "keepalive\n"); + printk(KERN_INFO DPFX "keepalive\n"); #endif - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, uarg.i)) - return -EFAULT; - - // the API states this is given in secs - new_timeout /= 60; - - if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) - return -EINVAL; - - timeout = new_timeout; - pc87413_refresh(); - - // fall through and return the new timeout... - - case WDIOC_GETTIMEOUT: - - new_timeout = timeout * 60; - - return put_user(new_timeout, uarg.i); - - case WDIOC_SETOPTIONS: - { - int options, retval = -EINVAL; - - if (get_user(options, uarg.i)) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) { - pc87413_disable(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) { - pc87413_enable(); - retval = 0; - } - - return retval; + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, uarg.i)) + return -EFAULT; + /* the API states this is given in secs */ + new_timeout /= 60; + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + timeout = new_timeout; + pc87413_refresh(); + /* fall through and return the new timeout... */ + case WDIOC_GETTIMEOUT: + new_timeout = timeout * 60; + return put_user(new_timeout, uarg.i); + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + if (get_user(options, uarg.i)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + pc87413_disable(); + retval = 0; } + if (options & WDIOS_ENABLECARD) { + pc87413_enable(); + retval = 0; + } + return retval; + } + default: + return -ENOTTY; } } @@ -517,10 +484,8 @@ static int pc87413_notify_sys(struct notifier_block *this, void *unused) { if (code == SYS_DOWN || code == SYS_HALT) - { /* Turn the card off */ pc87413_disable(); - } return NOTIFY_DONE; } @@ -530,18 +495,16 @@ static const struct file_operations pc87413_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = pc87413_write, - .ioctl = pc87413_ioctl, + .unlocked_ioctl = pc87413_ioctl, .open = pc87413_open, .release = pc87413_release, }; -static struct notifier_block pc87413_notifier = -{ +static struct notifier_block pc87413_notifier = { .notifier_call = pc87413_notify_sys, }; -static struct miscdevice pc87413_miscdev= -{ +static struct miscdevice pc87413_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &pc87413_fops @@ -561,29 +524,26 @@ static int __init pc87413_init(void) { int ret; - printk(KERN_INFO PFX "Version " VERSION " at io 0x%X\n", WDT_INDEX_IO_PORT); + printk(KERN_INFO PFX "Version " VERSION " at io 0x%X\n", + WDT_INDEX_IO_PORT); /* request_region(io, 2, "pc87413"); */ ret = register_reboot_notifier(&pc87413_notifier); if (ret != 0) { - printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - ret); + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", ret); } ret = misc_register(&pc87413_miscdev); - if (ret != 0) { printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, ret); unregister_reboot_notifier(&pc87413_notifier); return ret; } - printk(KERN_INFO PFX "initialized. timeout=%d min \n", timeout); - pc87413_enable(); - return 0; } @@ -600,8 +560,7 @@ static int __init pc87413_init(void) static void __exit pc87413_exit(void) { /* Stop the timer before we leave */ - if (!nowayout) - { + if (!nowayout) { pc87413_disable(); printk(KERN_INFO MODNAME "Watchdog disabled.\n"); } @@ -626,8 +585,12 @@ module_param(io, int, 0); MODULE_PARM_DESC(io, MODNAME " I/O port (default: " __MODULE_STRING(io) ")."); module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in minutes (default=" __MODULE_STRING(timeout) ")."); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in minutes (default=" + __MODULE_STRING(timeout) ")."); module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -- cgit v1.2.3 From 261dcc70aae926ba7b9218da7302f0ad2f665b79 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:43 +0100 Subject: [WATCHDOG 32/57] pcwd: clean up, unlocked_ioctl usage Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/pcwd.c | 179 +++++++++++++++++++++++++++--------------------- 1 file changed, 100 insertions(+), 79 deletions(-) diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c index 7b41434fac8c..e1259adf09f9 100644 --- a/drivers/watchdog/pcwd.c +++ b/drivers/watchdog/pcwd.c @@ -40,13 +40,15 @@ * fairly useless proc entry. * 990610 removed said useless proc code for the merge * 000403 Removed last traces of proc code. - * 011214 Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * 011214 Added nowayout module option to override + * CONFIG_WATCHDOG_NOWAYOUT * Added timeout module option to override default */ /* * A bells and whistles driver is available from http://www.pcwd.de/ - * More info available at http://www.berkprod.com/ or http://www.pcwatchdog.com/ + * More info available at http://www.berkprod.com/ or + * http://www.pcwatchdog.com/ */ #include /* For module specific items */ @@ -65,9 +67,8 @@ #include /* For isa devices */ #include /* For io-port access */ #include /* For spin_lock/spin_unlock/... */ - -#include /* For copy_to_user/put_user/... */ -#include /* For inb/outb/... */ +#include /* For copy_to_user/put_user/... */ +#include /* For inb/outb/... */ /* Module and version information */ #define WATCHDOG_VERSION "1.20" @@ -111,14 +112,16 @@ static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 }; #define WD_REVC_WTRP 0x01 /* Watchdog Trip status */ #define WD_REVC_HRBT 0x02 /* Watchdog Heartbeat */ #define WD_REVC_TTRP 0x04 /* Temperature Trip status */ -#define WD_REVC_RL2A 0x08 /* Relay 2 activated by on-board processor */ +#define WD_REVC_RL2A 0x08 /* Relay 2 activated by + on-board processor */ #define WD_REVC_RL1A 0x10 /* Relay 1 active */ #define WD_REVC_R2DS 0x40 /* Relay 2 disable */ #define WD_REVC_RLY2 0x80 /* Relay 2 activated? */ /* Port 2 : Control Status #2 */ #define WD_WDIS 0x10 /* Watchdog Disabled */ #define WD_ENTP 0x20 /* Watchdog Enable Temperature Trip */ -#define WD_SSEL 0x40 /* Watchdog Switch Select (1:SW1 <-> 0:SW2) */ +#define WD_SSEL 0x40 /* Watchdog Switch Select + (1:SW1 <-> 0:SW2) */ #define WD_WCMD 0x80 /* Watchdog Command Mode */ /* max. time we give an ISA watchdog card to process a command */ @@ -168,11 +171,15 @@ static int cards_found; static atomic_t open_allowed = ATOMIC_INIT(1); static char expect_close; static int temp_panic; -static struct { /* this is private data for each ISA-PC watchdog card */ + +/* this is private data for each ISA-PC watchdog card */ +static struct { char fw_ver_str[6]; /* The cards firmware version */ int revision; /* The card's revision */ - int supports_temp; /* Wether or not the card has a temperature device */ - int command_mode; /* Wether or not the card is in command mode */ + int supports_temp; /* Whether or not the card has + a temperature device */ + int command_mode; /* Whether or not the card is in + command mode */ int boot_status; /* The card's boot status */ int io_addr; /* The cards I/O address */ spinlock_t io_lock; /* the lock for io operations */ @@ -186,16 +193,20 @@ static struct { /* this is private data for each ISA-PC watchdog card */ #define DEBUG 2 /* print fancy stuff too */ static int debug = QUIET; module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)"); +MODULE_PARM_DESC(debug, + "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)"); -#define WATCHDOG_HEARTBEAT 0 /* default heartbeat = delay-time from dip-switches */ +/* default heartbeat = delay-time from dip-switches */ +#define WATCHDOG_HEARTBEAT 0 static int heartbeat = WATCHDOG_HEARTBEAT; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<=heartbeat<=7200 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2 <= heartbeat <= 7200 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Internal functions @@ -224,7 +235,7 @@ static int send_isa_command(int cmd) if (port0 == last_port0) break; /* Data is stable */ - udelay (250); + udelay(250); } if (debug >= DEBUG) @@ -236,7 +247,7 @@ static int send_isa_command(int cmd) static int set_command_mode(void) { - int i, found=0, count=0; + int i, found = 0, count = 0; /* Set the card into command mode */ spin_lock(&pcwd_private.io_lock); @@ -296,7 +307,8 @@ static inline void pcwd_get_firmware(void) ten = send_isa_command(CMD_ISA_VERSION_TENTH); hund = send_isa_command(CMD_ISA_VERSION_HUNDRETH); minor = send_isa_command(CMD_ISA_VERSION_MINOR); - sprintf(pcwd_private.fw_ver_str, "%c.%c%c%c", one, ten, hund, minor); + sprintf(pcwd_private.fw_ver_str, "%c.%c%c%c", + one, ten, hund, minor); } unset_command_mode(); @@ -305,7 +317,7 @@ static inline void pcwd_get_firmware(void) static inline int pcwd_get_option_switches(void) { - int option_switches=0; + int option_switches = 0; if (set_command_mode()) { /* Get switch settings */ @@ -322,7 +334,9 @@ static void pcwd_show_card_info(void) /* Get some extra info from the hardware (in command/debug/diag mode) */ if (pcwd_private.revision == PCWD_REVISION_A) - printk(KERN_INFO PFX "ISA-PC Watchdog (REV.A) detected at port 0x%04x\n", pcwd_private.io_addr); + printk(KERN_INFO PFX + "ISA-PC Watchdog (REV.A) detected at port 0x%04x\n", + pcwd_private.io_addr); else if (pcwd_private.revision == PCWD_REVISION_C) { pcwd_get_firmware(); printk(KERN_INFO PFX "ISA-PC Watchdog (REV.C) detected at port 0x%04x (Firmware version: %s)\n", @@ -347,12 +361,15 @@ static void pcwd_show_card_info(void) printk(KERN_INFO PFX "Previous reboot was caused by the card\n"); if (pcwd_private.boot_status & WDIOF_OVERHEAT) { - printk(KERN_EMERG PFX "Card senses a CPU Overheat. Panicking!\n"); - printk(KERN_EMERG PFX "CPU Overheat\n"); + printk(KERN_EMERG PFX + "Card senses a CPU Overheat. Panicking!\n"); + printk(KERN_EMERG PFX + "CPU Overheat\n"); } if (pcwd_private.boot_status == 0) - printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n"); + printk(KERN_INFO PFX + "No previous trip detected - Cold boot or reset\n"); } static void pcwd_timer_ping(unsigned long data) @@ -361,11 +378,12 @@ static void pcwd_timer_ping(unsigned long data) /* If we got a heartbeat pulse within the WDT_INTERVAL * we agree to ping the WDT */ - if(time_before(jiffies, pcwd_private.next_heartbeat)) { + if (time_before(jiffies, pcwd_private.next_heartbeat)) { /* Ping the watchdog */ spin_lock(&pcwd_private.io_lock); if (pcwd_private.revision == PCWD_REVISION_A) { - /* Rev A cards are reset by setting the WD_WDRST bit in register 1 */ + /* Rev A cards are reset by setting the + WD_WDRST bit in register 1 */ wdrst_stat = inb_p(pcwd_private.io_addr); wdrst_stat &= 0x0F; wdrst_stat |= WD_WDRST; @@ -381,7 +399,8 @@ static void pcwd_timer_ping(unsigned long data) spin_unlock(&pcwd_private.io_lock); } else { - printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); + printk(KERN_WARNING PFX + "Heartbeat lost! Will not ping the watchdog\n"); } } @@ -454,7 +473,7 @@ static int pcwd_keepalive(void) static int pcwd_set_heartbeat(int t) { - if ((t < 2) || (t > 7200)) /* arbitrary upper limit */ + if (t < 2 || t > 7200) /* arbitrary upper limit */ return -EINVAL; heartbeat = t; @@ -470,7 +489,7 @@ static int pcwd_get_status(int *status) { int control_status; - *status=0; + *status = 0; spin_lock(&pcwd_private.io_lock); if (pcwd_private.revision == PCWD_REVISION_A) /* Rev A cards return status information from @@ -494,9 +513,9 @@ static int pcwd_get_status(int *status) if (control_status & WD_T110) { *status |= WDIOF_OVERHEAT; if (temp_panic) { - printk(KERN_INFO PFX "Temperature overheat trip!\n"); + printk(KERN_INFO PFX + "Temperature overheat trip!\n"); kernel_power_off(); - /* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */ } } } else { @@ -506,9 +525,9 @@ static int pcwd_get_status(int *status) if (control_status & WD_REVC_TTRP) { *status |= WDIOF_OVERHEAT; if (temp_panic) { - printk(KERN_INFO PFX "Temperature overheat trip!\n"); + printk(KERN_INFO PFX + "Temperature overheat trip!\n"); kernel_power_off(); - /* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */ } } } @@ -524,18 +543,21 @@ static int pcwd_clear_status(void) spin_lock(&pcwd_private.io_lock); if (debug >= VERBOSE) - printk(KERN_INFO PFX "clearing watchdog trip status\n"); + printk(KERN_INFO PFX + "clearing watchdog trip status\n"); control_status = inb_p(pcwd_private.io_addr + 1); if (debug >= DEBUG) { - printk(KERN_DEBUG PFX "status was: 0x%02x\n", control_status); + printk(KERN_DEBUG PFX "status was: 0x%02x\n", + control_status); printk(KERN_DEBUG PFX "sending: 0x%02x\n", (control_status & WD_REVC_R2DS)); } /* clear reset status & Keep Relay 2 disable state as it is */ - outb_p((control_status & WD_REVC_R2DS), pcwd_private.io_addr + 1); + outb_p((control_status & WD_REVC_R2DS), + pcwd_private.io_addr + 1); spin_unlock(&pcwd_private.io_lock); } @@ -572,8 +594,7 @@ static int pcwd_get_temperature(int *temperature) * /dev/watchdog handling */ -static int pcwd_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long pcwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { int rv; int status; @@ -590,12 +611,12 @@ static int pcwd_ioctl(struct inode *inode, struct file *file, .identity = "PCWD", }; - switch(cmd) { + switch (cmd) { default: return -ENOTTY; case WDIOC_GETSUPPORT: - if(copy_to_user(argp, &ident, sizeof(ident))) + if (copy_to_user(argp, &ident, sizeof(ident))) return -EFAULT; return 0; @@ -613,25 +634,22 @@ static int pcwd_ioctl(struct inode *inode, struct file *file, return put_user(temperature, argp); case WDIOC_SETOPTIONS: - if (pcwd_private.revision == PCWD_REVISION_C) - { - if(copy_from_user(&rv, argp, sizeof(int))) + if (pcwd_private.revision == PCWD_REVISION_C) { + if (get_user(rv, argp)) return -EFAULT; - if (rv & WDIOS_DISABLECARD) - { - return pcwd_stop(); + if (rv & WDIOS_DISABLECARD) { + status = pcwd_stop(); + if (status < 0) + return status; } - - if (rv & WDIOS_ENABLECARD) - { - return pcwd_start(); + if (rv & WDIOS_ENABLECARD) { + status = pcwd_start(); + if (status < 0) + return status; } - if (rv & WDIOS_TEMPPANIC) - { temp_panic = 1; - } } return -EINVAL; @@ -682,16 +700,10 @@ static ssize_t pcwd_write(struct file *file, const char __user *buf, size_t len, static int pcwd_open(struct inode *inode, struct file *file) { - if (!atomic_dec_and_test(&open_allowed) ) { - if (debug >= VERBOSE) - printk(KERN_ERR PFX "Attempt to open already opened device.\n"); - atomic_inc( &open_allowed ); + if (test_and_set_bit(0, &open_allowed)) return -EBUSY; - } - if (nowayout) __module_get(THIS_MODULE); - /* Activate */ pcwd_start(); pcwd_keepalive(); @@ -700,14 +712,15 @@ static int pcwd_open(struct inode *inode, struct file *file) static int pcwd_close(struct inode *inode, struct file *file) { - if (expect_close == 42) { + if (expect_close == 42) pcwd_stop(); - } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + else { + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); pcwd_keepalive(); } expect_close = 0; - atomic_inc( &open_allowed ); + clear_bit(0, &open_allowed); return 0; } @@ -750,7 +763,7 @@ static const struct file_operations pcwd_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = pcwd_write, - .ioctl = pcwd_ioctl, + .unlocked_ioctl = pcwd_ioctl, .open = pcwd_open, .release = pcwd_close, }; @@ -788,7 +801,7 @@ static inline int get_revision(void) * presumes a floating bus reads as 0xff. */ if ((inb(pcwd_private.io_addr + 2) == 0xFF) || (inb(pcwd_private.io_addr + 3) == 0xFF)) - r=PCWD_REVISION_A; + r = PCWD_REVISION_A; spin_unlock(&pcwd_private.io_lock); return r; @@ -803,7 +816,7 @@ static inline int get_revision(void) */ static int __devinit pcwd_isa_match(struct device *dev, unsigned int id) { - int base_addr=pcwd_ioports[id]; + int base_addr = pcwd_ioports[id]; int port0, last_port0; /* Reg 0, in case it's REV A */ int port1, last_port1; /* Register 1 for REV C cards */ int i; @@ -813,7 +826,7 @@ static int __devinit pcwd_isa_match(struct device *dev, unsigned int id) printk(KERN_DEBUG PFX "pcwd_isa_match id=%d\n", id); - if (!request_region (base_addr, 4, "PCWD")) { + if (!request_region(base_addr, 4, "PCWD")) { printk(KERN_INFO PFX "Port 0x%04x unavailable\n", base_addr); return 0; } @@ -842,7 +855,7 @@ static int __devinit pcwd_isa_match(struct device *dev, unsigned int id) } } } - release_region (base_addr, 4); + release_region(base_addr, 4); return retval; } @@ -857,7 +870,8 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id) cards_found++; if (cards_found == 1) - printk(KERN_INFO PFX "v%s Ken Hollis (kenji@bitgate.com)\n", WD_VER); + printk(KERN_INFO PFX "v%s Ken Hollis (kenji@bitgate.com)\n", + WD_VER); if (cards_found > 1) { printk(KERN_ERR PFX "This driver only supports 1 device\n"); @@ -875,10 +889,11 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id) /* Check card's revision */ pcwd_private.revision = get_revision(); - if (!request_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) { + if (!request_region(pcwd_private.io_addr, + (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) { printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", pcwd_private.io_addr); - ret=-EIO; + ret = -EIO; goto error_request_region; } @@ -908,26 +923,30 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id) if (heartbeat == 0) heartbeat = heartbeat_tbl[(pcwd_get_option_switches() & 0x07)]; - /* Check that the heartbeat value is within it's range ; if not reset to the default */ + /* Check that the heartbeat value is within it's range; + if not reset to the default */ if (pcwd_set_heartbeat(heartbeat)) { pcwd_set_heartbeat(WATCHDOG_HEARTBEAT); - printk(KERN_INFO PFX "heartbeat value must be 2<=heartbeat<=7200, using %d\n", - WATCHDOG_HEARTBEAT); + printk(KERN_INFO PFX + "heartbeat value must be 2 <= heartbeat <= 7200, using %d\n", + WATCHDOG_HEARTBEAT); } if (pcwd_private.supports_temp) { ret = misc_register(&temp_miscdev); if (ret) { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - TEMP_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + TEMP_MINOR, ret); goto error_misc_register_temp; } } ret = misc_register(&pcwd_miscdev); if (ret) { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto error_misc_register_watchdog; } @@ -940,7 +959,8 @@ error_misc_register_watchdog: if (pcwd_private.supports_temp) misc_deregister(&temp_miscdev); error_misc_register_temp: - release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4); + release_region(pcwd_private.io_addr, + (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4); error_request_region: pcwd_private.io_addr = 0x0000; cards_found--; @@ -964,7 +984,8 @@ static int __devexit pcwd_isa_remove(struct device *dev, unsigned int id) misc_deregister(&pcwd_miscdev); if (pcwd_private.supports_temp) misc_deregister(&temp_miscdev); - release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4); + release_region(pcwd_private.io_addr, + (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4); pcwd_private.io_addr = 0x0000; cards_found--; -- cgit v1.2.3 From 84ca995c258df70a8914866e8c996845003ff938 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:48 +0100 Subject: [WATCHDOG 33/57] pnx4008_wdt: unlocked_ioctl setup Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/pnx4008_wdt.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 6b8483d3c783..8cd0d53941e7 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -30,8 +30,8 @@ #include #include -#include -#include +#include +#include #define MODULE_NAME "PNX4008-WDT: " @@ -144,9 +144,8 @@ static int pnx4008_wdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static ssize_t -pnx4008_wdt_write(struct file *file, const char *data, size_t len, - loff_t * ppos) +static ssize_t pnx4008_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { if (len) { if (!nowayout) { @@ -169,15 +168,14 @@ pnx4008_wdt_write(struct file *file, const char *data, size_t len, return len; } -static struct watchdog_info ident = { +static const struct watchdog_info ident = { .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, .identity = "PNX4008 Watchdog", }; -static int -pnx4008_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long pnx4008_wdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) { int ret = -ENOTTY; int time; @@ -238,7 +236,7 @@ static const struct file_operations pnx4008_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = pnx4008_wdt_write, - .ioctl = pnx4008_wdt_ioctl, + .unlocked_ioctl = pnx4008_wdt_ioctl, .open = pnx4008_wdt_open, .release = pnx4008_wdt_release, }; -- cgit v1.2.3 From 72d5c0505bafae1a393f50e169e20b682d37f28e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:54 +0100 Subject: [WATCHDOG 34/57] rm9k_wdt: clean up Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/rm9k_wdt.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/watchdog/rm9k_wdt.c b/drivers/watchdog/rm9k_wdt.c index 5c921e471564..c172906b553c 100644 --- a/drivers/watchdog/rm9k_wdt.c +++ b/drivers/watchdog/rm9k_wdt.c @@ -29,10 +29,10 @@ #include #include #include -#include +#include +#include #include #include -#include #include #include @@ -53,10 +53,12 @@ static void wdt_gpi_stop(void); static void wdt_gpi_set_timeout(unsigned int); static int wdt_gpi_open(struct inode *, struct file *); static int wdt_gpi_release(struct inode *, struct file *); -static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t, loff_t *); +static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t, + loff_t *); static long wdt_gpi_ioctl(struct file *, unsigned int, unsigned long); static int wdt_gpi_notify(struct notifier_block *, unsigned long, void *); -static const struct resource *wdt_gpi_get_resource(struct platform_device *, const char *, unsigned int); +static const struct resource *wdt_gpi_get_resource(struct platform_device *, + const char *, unsigned int); static int __init wdt_gpi_probe(struct device *); static int __exit wdt_gpi_remove(struct device *); @@ -68,7 +70,7 @@ static int locked; /* These are set from device resources */ -static void __iomem * wd_regs; +static void __iomem *wd_regs; static unsigned int wd_irq, wd_ctr; @@ -216,7 +218,8 @@ static int wdt_gpi_release(struct inode *inode, struct file *file) if (expect_close) { wdt_gpi_stop(); free_irq(wd_irq, &miscdev); - printk(KERN_INFO "%s: watchdog stopped\n", wdt_gpi_name); + printk(KERN_INFO "%s: watchdog stopped\n", + wdt_gpi_name); } else { printk(KERN_CRIT "%s: unexpected close() -" " watchdog left running\n", @@ -241,8 +244,7 @@ wdt_gpi_write(struct file *f, const char __user *d, size_t s, loff_t *o) return s ? 1 : 0; } -static long -wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg) +static long wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg) { long res = -ENOTTY; const long size = _IOC_SIZE(cmd); @@ -271,7 +273,8 @@ wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg) case WDIOC_GETSUPPORT: wdinfo.options = nowayout ? WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING : - WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE; + WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE; res = __copy_to_user(argp, &wdinfo, size) ? -EFAULT : size; break; -- cgit v1.2.3 From edef7a93f9414e1d4864150eabb49a618222c2bd Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:00 +0100 Subject: [WATCHDOG 35/57] s3c2410: watchdog cleanup and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/s3c2410_wdt.c | 148 ++++++++++++++++++++++------------------- 1 file changed, 80 insertions(+), 68 deletions(-) diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 98532c0e0689..97b4a2e8eb09 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -46,9 +46,8 @@ #include #include #include - -#include -#include +#include +#include #include @@ -65,8 +64,8 @@ static int nowayout = WATCHDOG_NOWAYOUT; static int tmr_margin = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME; static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT; -static int soft_noboot = 0; -static int debug = 0; +static int soft_noboot; +static int debug; module_param(tmr_margin, int, 0); module_param(tmr_atboot, int, 0); @@ -74,24 +73,23 @@ module_param(nowayout, int, 0); module_param(soft_noboot, int, 0); module_param(debug, int, 0); -MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")"); - -MODULE_PARM_DESC(tmr_atboot, "Watchdog is started at boot time if set to 1, default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT)); - -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); - +MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default=" + __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")"); +MODULE_PARM_DESC(tmr_atboot, + "Watchdog is started at boot time if set to 1, default=" + __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT)); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default depends on ONLY_TESTING)"); - MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug, (default 0)"); typedef enum close_state { CLOSE_STATE_NOT, - CLOSE_STATE_ALLOW=0x4021 + CLOSE_STATE_ALLOW = 0x4021 } close_state_t; -static DECLARE_MUTEX(open_lock); - +static unsigned long open_lock; static struct device *wdt_dev; /* platform device attached to */ static struct resource *wdt_mem; static struct resource *wdt_irq; @@ -99,38 +97,58 @@ static struct clk *wdt_clock; static void __iomem *wdt_base; static unsigned int wdt_count; static close_state_t allow_close; +static DEFINE_SPINLOCK(wdt_lock); /* watchdog control routines */ #define DBG(msg...) do { \ if (debug) \ printk(KERN_INFO msg); \ - } while(0) + } while (0) /* functions */ -static int s3c2410wdt_keepalive(void) +static void s3c2410wdt_keepalive(void) { + spin_lock(&wdt_lock); writel(wdt_count, wdt_base + S3C2410_WTCNT); - return 0; + spin_unlock(&wdt_lock); } -static int s3c2410wdt_stop(void) +static void __s3c2410wdt_stop(void) { unsigned long wtcon; + spin_lock(&wdt_lock); wtcon = readl(wdt_base + S3C2410_WTCON); wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN); writel(wtcon, wdt_base + S3C2410_WTCON); + spin_unlock(&wdt_lock); +} - return 0; +static void __s3c2410wdt_stop(void) +{ + unsigned long wtcon; + + wtcon = readl(wdt_base + S3C2410_WTCON); + wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN); + writel(wtcon, wdt_base + S3C2410_WTCON); +} + +static void s3c2410wdt_stop(void) +{ + spin_lock(&wdt_lock); + __s3c2410wdt_stop(); + spin_unlock(&wdt_lock); } -static int s3c2410wdt_start(void) +static void s3c2410wdt_start(void) { unsigned long wtcon; - s3c2410wdt_stop(); + spin_lock(&wdt_lock); + + __s3c2410wdt_stop(); wtcon = readl(wdt_base + S3C2410_WTCON); wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128; @@ -149,6 +167,7 @@ static int s3c2410wdt_start(void) writel(wdt_count, wdt_base + S3C2410_WTDAT); writel(wdt_count, wdt_base + S3C2410_WTCNT); writel(wtcon, wdt_base + S3C2410_WTCON); + spin_unlock(&wdt_lock); return 0; } @@ -211,7 +230,7 @@ static int s3c2410wdt_set_heartbeat(int timeout) static int s3c2410wdt_open(struct inode *inode, struct file *file) { - if(down_trylock(&open_lock)) + if (test_and_set_bit(0, &open_lock)) return -EBUSY; if (nowayout) @@ -231,15 +250,14 @@ static int s3c2410wdt_release(struct inode *inode, struct file *file) * Lock it in if it's a module and we set nowayout */ - if (allow_close == CLOSE_STATE_ALLOW) { + if (allow_close == CLOSE_STATE_ALLOW) s3c2410wdt_stop(); - } else { + else { dev_err(wdt_dev, "Unexpected close, not stopping watchdog\n"); s3c2410wdt_keepalive(); } - allow_close = CLOSE_STATE_NOT; - up(&open_lock); + clear_bit(0, &open_lock); return 0; } @@ -249,7 +267,7 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data, /* * Refresh the timer. */ - if(len) { + if (len) { if (!nowayout) { size_t i; @@ -265,7 +283,6 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data, allow_close = CLOSE_STATE_ALLOW; } } - s3c2410wdt_keepalive(); } return len; @@ -273,48 +290,41 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data, #define OPTIONS WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE -static struct watchdog_info s3c2410_wdt_ident = { +static const struct watchdog_info s3c2410_wdt_ident = { .options = OPTIONS, .firmware_version = 0, .identity = "S3C2410 Watchdog", }; -static int s3c2410wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long s3c2410wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; int new_margin; switch (cmd) { - default: - return -ENOTTY; - - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &s3c2410_wdt_ident, - sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_KEEPALIVE: - s3c2410wdt_keepalive(); - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_margin, p)) - return -EFAULT; - - if (s3c2410wdt_set_heartbeat(new_margin)) - return -EINVAL; - - s3c2410wdt_keepalive(); - return put_user(tmr_margin, p); - - case WDIOC_GETTIMEOUT: - return put_user(tmr_margin, p); + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &s3c2410_wdt_ident, + sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + s3c2410wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_margin, p)) + return -EFAULT; + if (s3c2410wdt_set_heartbeat(new_margin)) + return -EINVAL; + s3c2410wdt_keepalive(); + return put_user(tmr_margin, p); + case WDIOC_GETTIMEOUT: + return put_user(tmr_margin, p); } } @@ -324,7 +334,7 @@ static const struct file_operations s3c2410wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = s3c2410wdt_write, - .ioctl = s3c2410wdt_ioctl, + .unlocked_ioctl = s3c2410wdt_ioctl, .open = s3c2410wdt_open, .release = s3c2410wdt_release, }; @@ -411,14 +421,15 @@ static int s3c2410wdt_probe(struct platform_device *pdev) * not, try the default value */ if (s3c2410wdt_set_heartbeat(tmr_margin)) { - started = s3c2410wdt_set_heartbeat(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); + started = s3c2410wdt_set_heartbeat( + CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); - if (started == 0) { - dev_info(dev,"tmr_margin value out of range, default %d used\n", + if (started == 0) + dev_info(dev, + "tmr_margin value out of range, default %d used\n", CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); - } else { + else dev_info(dev, "default timer value is out of range, cannot start\n"); - } } ret = misc_register(&s3c2410wdt_miscdev); @@ -447,7 +458,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) (wtcon & S3C2410_WTCON_ENABLE) ? "" : "in", (wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis", (wtcon & S3C2410_WTCON_INTEN) ? "" : "en"); - + return 0; err_clk: @@ -487,7 +498,7 @@ static int s3c2410wdt_remove(struct platform_device *dev) static void s3c2410wdt_shutdown(struct platform_device *dev) { - s3c2410wdt_stop(); + s3c2410wdt_stop(); } #ifdef CONFIG_PM @@ -540,7 +551,8 @@ static struct platform_driver s3c2410wdt_driver = { }; -static char banner[] __initdata = KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n"; +static char banner[] __initdata = + KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n"; static int __init watchdog_init(void) { -- cgit v1.2.3 From f19e031265dc6e05511308a6ecb9637e335b45b0 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:05 +0100 Subject: [WATCHDOG 36/57] sa1100_wdt: Switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sa1100_wdt.c | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-) diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index 34a2b3b81800..869d538c02f9 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -26,13 +26,13 @@ #include #include #include +#include #ifdef CONFIG_ARCH_PXA #include #endif #include -#include #define OSCR_FREQ CLOCK_TICK_RATE @@ -45,7 +45,7 @@ static int boot_status; */ static int sa1100dog_open(struct inode *inode, struct file *file) { - if (test_and_set_bit(1,&sa1100wdt_users)) + if (test_and_set_bit(1, &sa1100wdt_users)) return -EBUSY; /* Activate SA1100 Watchdog timer */ @@ -66,28 +66,27 @@ static int sa1100dog_open(struct inode *inode, struct file *file) static int sa1100dog_release(struct inode *inode, struct file *file) { printk(KERN_CRIT "WATCHDOG: Device closed - timer will not stop\n"); - clear_bit(1, &sa1100wdt_users); - return 0; } -static ssize_t sa1100dog_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) +static ssize_t sa1100dog_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { if (len) /* Refresh OSMR3 timer. */ OSMR3 = OSCR + pre_margin; - return len; } -static struct watchdog_info ident = { - .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, +static const struct watchdog_info ident = { + .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT + | WDIOF_KEEPALIVEPING, .identity = "SA1100/PXA255 Watchdog", }; -static int sa1100dog_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long sa1100dog_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int ret = -ENOTTY; int time; @@ -134,18 +133,16 @@ static int sa1100dog_ioctl(struct inode *inode, struct file *file, return ret; } -static const struct file_operations sa1100dog_fops = -{ +static const struct file_operations sa1100dog_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = sa1100dog_write, - .ioctl = sa1100dog_ioctl, + .unlocked_ioctl = sa1100dog_ioctl, .open = sa1100dog_open, .release = sa1100dog_release, }; -static struct miscdevice sa1100dog_miscdev = -{ +static struct miscdevice sa1100dog_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &sa1100dog_fops, @@ -167,8 +164,9 @@ static int __init sa1100dog_init(void) ret = misc_register(&sa1100dog_miscdev); if (ret == 0) - printk("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n", - margin); + printk(KERN_INFO + "SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n", + margin); return ret; } -- cgit v1.2.3 From 1780de41406d783aa57459ba636a09aeda21d180 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:11 +0100 Subject: [WATCHDOG 37/57] sbc60xxwdt: clean up and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sbc60xxwdt.c | 223 +++++++++++++++++++++--------------------- 1 file changed, 110 insertions(+), 113 deletions(-) diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c index ef76f01625e7..e284a5d4fb1b 100644 --- a/drivers/watchdog/sbc60xxwdt.c +++ b/drivers/watchdog/sbc60xxwdt.c @@ -16,19 +16,23 @@ * * 12/4 - 2000 [Initial revision] * 25/4 - 2000 Added /dev/watchdog support - * 09/5 - 2001 [smj@oro.net] fixed fop_write to "return 1" on success + * 09/5 - 2001 [smj@oro.net] fixed fop_write to "return 1" + * on success * 12/4 - 2002 [rob@osinvestor.com] eliminate fop_read * fix possible wdt_is_open race * add CONFIG_WATCHDOG_NOWAYOUT support * remove lock_kernel/unlock_kernel pairs * added KERN_* to printk's * got rid of extraneous comments - * changed watchdog_info to correctly reflect what the driver offers - * added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS, WDIOC_SETTIMEOUT, - * WDIOC_GETTIMEOUT, and WDIOC_SETOPTIONS ioctls + * changed watchdog_info to correctly reflect what + * the driver offers + * added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS, + * WDIOC_SETTIMEOUT, WDIOC_GETTIMEOUT, and + * WDIOC_SETOPTIONS ioctls * 09/8 - 2003 [wim@iguana.be] cleanup of trailing spaces * use module_param - * made timeout (the emulated heartbeat) a module_param + * made timeout (the emulated heartbeat) a + * module_param * made the keepalive ping an internal subroutine * made wdt_stop and wdt_start module params * added extra printk's for startup problems @@ -56,9 +60,9 @@ #include #include #include +#include +#include -#include -#include #include #define OUR_NAME "sbc60xxwdt" @@ -94,13 +98,18 @@ MODULE_PARM_DESC(wdt_start, "SBC60xx WDT 'start' io port (default 0x443)"); */ #define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ -static int timeout = WATCHDOG_TIMEOUT; /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +static int timeout = WATCHDOG_TIMEOUT; /* in seconds, multiplied by HZ to + get seconds to wait for a ping */ module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1<=timeout<=3600, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static void wdt_timer_ping(unsigned long); static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0); @@ -117,15 +126,14 @@ static void wdt_timer_ping(unsigned long data) /* If we got a heartbeat pulse within the WDT_US_INTERVAL * we agree to ping the WDT */ - if(time_before(jiffies, next_heartbeat)) - { + if (time_before(jiffies, next_heartbeat)) { /* Ping the WDT by reading from wdt_start */ inb_p(wdt_start); /* Re-set the timer interval */ mod_timer(&timer, jiffies + WDT_INTERVAL); - } else { - printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); - } + } else + printk(KERN_WARNING PFX + "Heartbeat lost! Will not ping the watchdog\n"); } /* @@ -159,40 +167,40 @@ static void wdt_keepalive(void) * /dev/watchdog handling */ -static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos) +static ssize_t fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ - if(count) - { - if (!nowayout) - { + if (count) { + if (!nowayout) { size_t ofs; - /* note: just in case someone wrote the magic character - * five months ago... */ + /* note: just in case someone wrote the + magic character five months ago... */ wdt_expect_close = 0; - /* scan to see whether or not we got the magic character */ - for(ofs = 0; ofs != count; ofs++) - { + /* scan to see whether or not we got the + magic character */ + for (ofs = 0; ofs != count; ofs++) { char c; - if(get_user(c, buf+ofs)) + if (get_user(c, buf+ofs)) return -EFAULT; - if(c == 'V') + if (c == 'V') wdt_expect_close = 42; } } - /* Well, anyhow someone wrote to us, we should return that favour */ + /* Well, anyhow someone wrote to us, we should + return that favour */ wdt_keepalive(); } return count; } -static int fop_open(struct inode * inode, struct file * file) +static int fop_open(struct inode *inode, struct file *file) { /* Just in case we're already talking to someone... */ - if(test_and_set_bit(0, &wdt_is_open)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; if (nowayout) @@ -203,78 +211,72 @@ static int fop_open(struct inode * inode, struct file * file) return nonseekable_open(inode, file); } -static int fop_close(struct inode * inode, struct file * file) +static int fop_close(struct inode *inode, struct file *file) { - if(wdt_expect_close == 42) + if (wdt_expect_close == 42) wdt_turnoff(); else { del_timer(&timer); - printk(KERN_CRIT PFX "device file closed unexpectedly. Will not stop the WDT!\n"); + printk(KERN_CRIT PFX + "device file closed unexpectedly. Will not stop the WDT!\n"); } clear_bit(0, &wdt_is_open); wdt_expect_close = 0; return 0; } -static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident= - { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "SBC60xx", }; - switch(cmd) + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident))? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETOPTIONS: { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; - case WDIOC_SETOPTIONS: - { - int new_options, retval = -EINVAL; - - if(get_user(new_options, p)) - return -EFAULT; - - if(new_options & WDIOS_DISABLECARD) { - wdt_turnoff(); - retval = 0; - } - - if(new_options & WDIOS_ENABLECARD) { - wdt_startup(); - retval = 0; - } - - return retval; + int new_options, retval = -EINVAL; + if (get_user(new_options, p)) + return -EFAULT; + if (new_options & WDIOS_DISABLECARD) { + wdt_turnoff(); + retval = 0; } - case WDIOC_SETTIMEOUT: - { - int new_timeout; - - if(get_user(new_timeout, p)) - return -EFAULT; - - if(new_timeout < 1 || new_timeout > 3600) /* arbitrary upper limit */ - return -EINVAL; - - timeout = new_timeout; - wdt_keepalive(); - /* Fall through */ + if (new_options & WDIOS_ENABLECARD) { + wdt_startup(); + retval = 0; } - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); + return retval; + } + case WDIOC_SETTIMEOUT: + { + int new_timeout; + if (get_user(new_timeout, p)) + return -EFAULT; + /* arbitrary upper limit */ + if (new_timeout < 1 || new_timeout > 3600) + return -EINVAL; + + timeout = new_timeout; + wdt_keepalive(); + /* Fall through */ + } + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); } } @@ -284,7 +286,7 @@ static const struct file_operations wdt_fops = { .write = fop_write, .open = fop_open, .release = fop_close, - .ioctl = fop_ioctl, + .unlocked_ioctl = fop_ioctl, }; static struct miscdevice wdt_miscdev = { @@ -300,7 +302,7 @@ static struct miscdevice wdt_miscdev = { static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if(code==SYS_DOWN || code==SYS_HALT) + if (code == SYS_DOWN || code == SYS_HALT) wdt_turnoff(); return NOTIFY_DONE; } @@ -310,8 +312,7 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code, * turn the timebomb registers off. */ -static struct notifier_block wdt_notifier= -{ +static struct notifier_block wdt_notifier = { .notifier_call = wdt_notify_sys, }; @@ -324,23 +325,22 @@ static void __exit sbc60xxwdt_unload(void) unregister_reboot_notifier(&wdt_notifier); if ((wdt_stop != 0x45) && (wdt_stop != wdt_start)) - release_region(wdt_stop,1); - release_region(wdt_start,1); + release_region(wdt_stop, 1); + release_region(wdt_start, 1); } static int __init sbc60xxwdt_init(void) { int rc = -EBUSY; - if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */ - { + if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */ timeout = WATCHDOG_TIMEOUT; - printk(KERN_INFO PFX "timeout value must be 1<=x<=3600, using %d\n", - timeout); - } + printk(KERN_INFO PFX + "timeout value must be 1 <= x <= 3600, using %d\n", + timeout); + } - if (!request_region(wdt_start, 1, "SBC 60XX WDT")) - { + if (!request_region(wdt_start, 1, "SBC 60XX WDT")) { printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", wdt_start); rc = -EIO; @@ -348,33 +348,30 @@ static int __init sbc60xxwdt_init(void) } /* We cannot reserve 0x45 - the kernel already has! */ - if ((wdt_stop != 0x45) && (wdt_stop != wdt_start)) - { - if (!request_region(wdt_stop, 1, "SBC 60XX WDT")) - { - printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_stop); + if (wdt_stop != 0x45 && wdt_stop != wdt_start) { + if (!request_region(wdt_stop, 1, "SBC 60XX WDT")) { + printk(KERN_ERR PFX + "I/O address 0x%04x already in use\n", + wdt_stop); rc = -EIO; goto err_out_region1; } } rc = register_reboot_notifier(&wdt_notifier); - if (rc) - { - printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - rc); + if (rc) { + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", rc); goto err_out_region2; } rc = misc_register(&wdt_miscdev); - if (rc) - { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - wdt_miscdev.minor, rc); + if (rc) { + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); goto err_out_reboot; } - printk(KERN_INFO PFX "WDT driver for 60XX single board computer initialised. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); @@ -383,10 +380,10 @@ static int __init sbc60xxwdt_init(void) err_out_reboot: unregister_reboot_notifier(&wdt_notifier); err_out_region2: - if ((wdt_stop != 0x45) && (wdt_stop != wdt_start)) - release_region(wdt_stop,1); + if (wdt_stop != 0x45 && wdt_stop != wdt_start) + release_region(wdt_stop, 1); err_out_region1: - release_region(wdt_start,1); + release_region(wdt_start, 1); err_out: return rc; } -- cgit v1.2.3 From 619a8a2bb1d0c3f8270da4496a30f1e83e6eab5e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:16 +0100 Subject: [WATCHDOG 38/57] stg7240_wdt: unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sbc7240_wdt.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/watchdog/sbc7240_wdt.c b/drivers/watchdog/sbc7240_wdt.c index 4c8cefbd8627..abccbe265249 100644 --- a/drivers/watchdog/sbc7240_wdt.c +++ b/drivers/watchdog/sbc7240_wdt.c @@ -27,10 +27,10 @@ #include #include #include +#include +#include #include -#include #include -#include #define SBC7240_PREFIX "sbc7240_wdt: " @@ -159,7 +159,7 @@ static int fop_close(struct inode *inode, struct file *file) return 0; } -static struct watchdog_info ident = { +static const struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING| WDIOF_SETTIMEOUT| WDIOF_MAGICCLOSE, @@ -168,14 +168,12 @@ static struct watchdog_info ident = { }; -static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { switch (cmd) { case WDIOC_GETSUPPORT: - return copy_to_user - ((void __user *)arg, &ident, sizeof(ident)) - ? -EFAULT : 0; + return copy_to_user((void __user *)arg, &ident, sizeof(ident)) + ? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, (int __user *)arg); @@ -225,7 +223,7 @@ static const struct file_operations wdt_fops = { .write = fop_write, .open = fop_open, .release = fop_close, - .ioctl = fop_ioctl, + .unlocked_ioctl = fop_ioctl, }; static struct miscdevice wdt_miscdev = { -- cgit v1.2.3 From 9f53c8de1aef08cad678dcda0f85fd8914ad7666 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:22 +0100 Subject: [WATCHDOG 39/57] sbc8360: clean up Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sbc8360.c | 30 ++++++++++++------------------ 1 file changed, 12 insertions(+), 18 deletions(-) diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c index 2ee2677f3648..c66fa6694fc3 100644 --- a/drivers/watchdog/sbc8360.c +++ b/drivers/watchdog/sbc8360.c @@ -48,13 +48,12 @@ #include #include #include +#include +#include -#include -#include #include static unsigned long sbc8360_is_open; -static DEFINE_SPINLOCK(sbc8360_lock); static char expect_close; #define PFX "sbc8360: " @@ -204,7 +203,8 @@ module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "Index into timeout table (0-63) (default=27 (60s))"); module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, - "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Kernel methods. @@ -232,8 +232,8 @@ static void sbc8360_ping(void) } /* Userspace pings kernel driver, or requests clean close */ -static ssize_t sbc8360_write(struct file *file, const char __user * buf, - size_t count, loff_t * ppos) +static ssize_t sbc8360_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { if (count) { if (!nowayout) { @@ -257,16 +257,12 @@ static ssize_t sbc8360_write(struct file *file, const char __user * buf, static int sbc8360_open(struct inode *inode, struct file *file) { - spin_lock(&sbc8360_lock); - if (test_and_set_bit(0, &sbc8360_is_open)) { - spin_unlock(&sbc8360_lock); + if (test_and_set_bit(0, &sbc8360_is_open)) return -EBUSY; - } if (nowayout) __module_get(THIS_MODULE); /* Activate and ping once to start the countdown */ - spin_unlock(&sbc8360_lock); sbc8360_activate(); sbc8360_ping(); return nonseekable_open(inode, file); @@ -274,16 +270,14 @@ static int sbc8360_open(struct inode *inode, struct file *file) static int sbc8360_close(struct inode *inode, struct file *file) { - spin_lock(&sbc8360_lock); if (expect_close == 42) outb(0, SBC8360_ENABLE); else printk(KERN_CRIT PFX - "SBC8360 device closed unexpectedly. SBC8360 will not stop!\n"); + "SBC8360 device closed unexpectedly. SBC8360 will not stop!\n"); clear_bit(0, &sbc8360_is_open); expect_close = 0; - spin_unlock(&sbc8360_lock); return 0; } @@ -382,13 +376,13 @@ static int __init sbc8360_init(void) return 0; - out_nomisc: +out_nomisc: unregister_reboot_notifier(&sbc8360_notifier); - out_noreboot: +out_noreboot: release_region(SBC8360_BASETIME, 1); - out_nobasetimereg: +out_nobasetimereg: release_region(SBC8360_ENABLE, 1); - out: +out: return res; } -- cgit v1.2.3 From f4f6f65a554d4a11e544070c39eea7c2ecc3ebfb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:27 +0100 Subject: [WATCHDOG 40/57] sbc_epx_c3_wdt: switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sbc_epx_c3.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c index 82cbd8809a69..70ff9cbc8e9b 100644 --- a/drivers/watchdog/sbc_epx_c3.c +++ b/drivers/watchdog/sbc_epx_c3.c @@ -25,8 +25,8 @@ #include #include #include -#include -#include +#include +#include #define PFX "epx_c3: " static int epx_c3_alive; @@ -100,12 +100,12 @@ static ssize_t epx_c3_write(struct file *file, const char __user *data, return len; } -static int epx_c3_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long epx_c3_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int options, retval = -EINVAL; int __user *argp = (void __user *)arg; - static struct watchdog_info ident = { + static const struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, .firmware_version = 0, @@ -158,7 +158,7 @@ static const struct file_operations epx_c3_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = epx_c3_write, - .ioctl = epx_c3_ioctl, + .unlocked_ioctl = epx_c3_ioctl, .open = epx_c3_open, .release = epx_c3_release, }; -- cgit v1.2.3 From df3c9de3dee539c6b18a9c0797b37f6cb90c6ccb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:33 +0100 Subject: [WATCHDOG 41/57] sb_wdog: Clean up and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sb_wdog.c | 78 ++++++++++++++++++++++++---------------------- 1 file changed, 40 insertions(+), 38 deletions(-) diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c index b94431433695..c8b544ce77fb 100644 --- a/drivers/watchdog/sb_wdog.c +++ b/drivers/watchdog/sb_wdog.c @@ -57,6 +57,7 @@ #include #include +static DEFINE_SPINLOCK(sbwd_lock); /* * set the initial count value of a timer @@ -65,8 +66,10 @@ */ void sbwdog_set(char __iomem *wdog, unsigned long t) { + spin_lock(&sbwd_lock); __raw_writeb(0, wdog - 0x10); __raw_writeq(t & 0x7fffffUL, wdog); + spin_unlock(&sbwd_lock); } /* @@ -77,7 +80,9 @@ void sbwdog_set(char __iomem *wdog, unsigned long t) */ void sbwdog_pet(char __iomem *wdog) { + spin_lock(&sbwd_lock); __raw_writeb(__raw_readb(wdog) | 1, wdog); + spin_unlock(&sbwd_lock); } static unsigned long sbwdog_gate; /* keeps it to one thread only */ @@ -86,8 +91,9 @@ static char __iomem *user_dog = (char __iomem *)(IO_BASE + (A_SCD_WDOG_CFG_1)); static unsigned long timeout = 0x7fffffUL; /* useconds: 8.3ish secs. */ static int expect_close; -static struct watchdog_info ident = { - .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, +static const struct watchdog_info ident = { + .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING, .identity = "SiByte Watchdog", }; @@ -97,9 +103,8 @@ static struct watchdog_info ident = { static int sbwdog_open(struct inode *inode, struct file *file) { nonseekable_open(inode, file); - if (test_and_set_bit(0, &sbwdog_gate)) { + if (test_and_set_bit(0, &sbwdog_gate)) return -EBUSY; - } __module_get(THIS_MODULE); /* @@ -120,8 +125,9 @@ static int sbwdog_release(struct inode *inode, struct file *file) __raw_writeb(0, user_dog); module_put(THIS_MODULE); } else { - printk(KERN_CRIT "%s: Unexpected close, not stopping watchdog!\n", - ident.identity); + printk(KERN_CRIT + "%s: Unexpected close, not stopping watchdog!\n", + ident.identity); sbwdog_pet(user_dog); } clear_bit(0, &sbwdog_gate); @@ -147,12 +153,10 @@ static ssize_t sbwdog_write(struct file *file, const char __user *data, for (i = 0; i != len; i++) { char c; - if (get_user(c, data + i)) { + if (get_user(c, data + i)) return -EFAULT; - } - if (c == 'V') { + if (c == 'V') expect_close = 42; - } } sbwdog_pet(user_dog); } @@ -160,8 +164,8 @@ static ssize_t sbwdog_write(struct file *file, const char __user *data, return len; } -static int sbwdog_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long sbwdog_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int ret = -ENOTTY; unsigned long time; @@ -180,9 +184,8 @@ static int sbwdog_ioctl(struct inode *inode, struct file *file, case WDIOC_SETTIMEOUT: ret = get_user(time, p); - if (ret) { + if (ret) break; - } time *= 1000000; if (time > 0x7fffffUL) { @@ -226,18 +229,16 @@ sbwdog_notify_sys(struct notifier_block *this, unsigned long code, void *erf) return NOTIFY_DONE; } -static const struct file_operations sbwdog_fops = -{ +static const struct file_operations sbwdog_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = sbwdog_write, - .ioctl = sbwdog_ioctl, + .unlocked_ioctl = sbwdog_ioctl, .open = sbwdog_open, .release = sbwdog_release, }; -static struct miscdevice sbwdog_miscdev = -{ +static struct miscdevice sbwdog_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &sbwdog_fops, @@ -267,13 +268,12 @@ irqreturn_t sbwdog_interrupt(int irq, void *addr) /* * if it's the second watchdog timer, it's for those users */ - if (wd_cfg_reg == user_dog) { + if (wd_cfg_reg == user_dog) printk(KERN_CRIT "%s in danger of initiating system reset in %ld.%01ld seconds\n", ident.identity, wd_init / 1000000, (wd_init / 100000) % 10); - } else { + else cfg |= 1; - } __raw_writeb(cfg, wd_cfg_reg); @@ -289,28 +289,31 @@ static int __init sbwdog_init(void) */ ret = register_reboot_notifier(&sbwdog_notifier); if (ret) { - printk (KERN_ERR "%s: cannot register reboot notifier (err=%d)\n", - ident.identity, ret); + printk(KERN_ERR + "%s: cannot register reboot notifier (err=%d)\n", + ident.identity, ret); return ret; } /* * get the resources */ - ret = misc_register(&sbwdog_miscdev); - if (ret == 0) { - printk(KERN_INFO "%s: timeout is %ld.%ld secs\n", ident.identity, - timeout / 1000000, (timeout / 100000) % 10); - } ret = request_irq(1, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED, ident.identity, (void *)user_dog); if (ret) { - printk(KERN_ERR "%s: failed to request irq 1 - %d\n", ident.identity, - ret); - misc_deregister(&sbwdog_miscdev); + printk(KERN_ERR "%s: failed to request irq 1 - %d\n", + ident.identity, ret); + return ret; } + ret = misc_register(&sbwdog_miscdev); + if (ret == 0) { + printk(KERN_INFO "%s: timeout is %ld.%ld secs\n", + ident.identity, + timeout / 1000000, (timeout / 100000) % 10); + } else + free_irq(1, (void *)user_dog); return ret; } @@ -327,7 +330,7 @@ MODULE_DESCRIPTION("SiByte Watchdog"); module_param(timeout, ulong, 0); MODULE_PARM_DESC(timeout, - "Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)"); + "Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); @@ -336,16 +339,15 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); * example code that can be put in a platform code area to utilize the * first watchdog timer for the kernels own purpose. - void -platform_wd_setup(void) +void platform_wd_setup(void) { int ret; - ret = request_irq(0, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED, + ret = request_irq(1, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED, "Kernel Watchdog", IOADDR(A_SCD_WDOG_CFG_0)); if (ret) { - printk(KERN_CRIT "Watchdog IRQ zero(0) failed to be requested - %d\n", - ret); + printk(KERN_CRIT + "Watchdog IRQ zero(0) failed to be requested - %d\n", ret); } } -- cgit v1.2.3 From d14bccaadaa49b651fabcd1298b6ea07db3af552 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:38 +0100 Subject: [WATCHDOG 42/57] sc1200_wdt: clean up, fix locking and use unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sc1200wdt.c | 203 ++++++++++++++++++++++++------------------- 1 file changed, 114 insertions(+), 89 deletions(-) diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index 35cddff7020f..7e5c9cc97dee 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -15,14 +15,18 @@ * * Changelog: * 20020220 Zwane Mwaikambo Code based on datasheet, no hardware. - * 20020221 Zwane Mwaikambo Cleanups as suggested by Jeff Garzik and Alan Cox. + * 20020221 Zwane Mwaikambo Cleanups as suggested by Jeff Garzik + * and Alan Cox. * 20020222 Zwane Mwaikambo Added probing. * 20020225 Zwane Mwaikambo Added ISAPNP support. * 20020412 Rob Radez Broke out start/stop functions - * Return proper status instead of temperature warning - * Add WDIOC_GETBOOTSTATUS and WDIOC_SETOPTIONS ioctls + * Return proper status instead of + * temperature warning + * Add WDIOC_GETBOOTSTATUS and + * WDIOC_SETOPTIONS ioctls * Fix CONFIG_WATCHDOG_NOWAYOUT - * 20020530 Joel Becker Add Matt Domsch's nowayout module option + * 20020530 Joel Becker Add Matt Domsch's nowayout module + * option * 20030116 Adam Belay Updated to the latest pnp code * */ @@ -39,9 +43,8 @@ #include #include #include - -#include -#include +#include +#include #define SC1200_MODULE_VER "build 20020303" #define SC1200_MODULE_NAME "sc1200wdt" @@ -72,7 +75,7 @@ static char banner[] __initdata = KERN_INFO PFX SC1200_MODULE_VER; static int timeout = 1; static int io = -1; static int io_len = 2; /* for non plug and play */ -static struct semaphore open_sem; +static unsigned long open_flag; static char expect_close; static DEFINE_SPINLOCK(sc1200wdt_lock); /* io port access serialisation */ @@ -81,7 +84,8 @@ static int isapnp = 1; static struct pnp_dev *wdt_dev; module_param(isapnp, int, 0); -MODULE_PARM_DESC(isapnp, "When set to 0 driver ISA PnP support will be disabled"); +MODULE_PARM_DESC(isapnp, + "When set to 0 driver ISA PnP support will be disabled"); #endif module_param(io, int, 0); @@ -91,26 +95,40 @@ MODULE_PARM_DESC(timeout, "range is 0-255 minutes, default is 1"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* Read from Data Register */ -static inline void sc1200wdt_read_data(unsigned char index, unsigned char *data) +static inline void __sc1200wdt_read_data(unsigned char index, + unsigned char *data) { - spin_lock(&sc1200wdt_lock); outb_p(index, PMIR); *data = inb(PMDR); - spin_unlock(&sc1200wdt_lock); } +static void sc1200wdt_read_data(unsigned char index, unsigned char *data) +{ + spin_lock(&sc1200wdt_lock); + __sc1200wdt_read_data(index, data); + spin_unlock(&sc1200wdt_lock); +} /* Write to Data Register */ -static inline void sc1200wdt_write_data(unsigned char index, unsigned char data) +static inline void __sc1200wdt_write_data(unsigned char index, + unsigned char data) { - spin_lock(&sc1200wdt_lock); outb_p(index, PMIR); outb(data, PMDR); +} + +static inline void sc1200wdt_write_data(unsigned char index, + unsigned char data) +{ + spin_lock(&sc1200wdt_lock); + __sc1200wdt_write_data(index, data); spin_unlock(&sc1200wdt_lock); } @@ -118,13 +136,16 @@ static inline void sc1200wdt_write_data(unsigned char index, unsigned char data) static void sc1200wdt_start(void) { unsigned char reg; + spin_lock(&sc1200wdt_lock); - sc1200wdt_read_data(WDCF, ®); + __sc1200wdt_read_data(WDCF, ®); /* assert WDO when any of the following interrupts are triggered too */ reg |= (KBC_IRQ | MSE_IRQ | UART1_IRQ | UART2_IRQ); - sc1200wdt_write_data(WDCF, reg); + __sc1200wdt_write_data(WDCF, reg); /* set the timeout and get the ball rolling */ - sc1200wdt_write_data(WDTO, timeout); + __sc1200wdt_write_data(WDTO, timeout); + + spin_unlock(&sc1200wdt_lock); } @@ -144,14 +165,15 @@ static inline int sc1200wdt_status(void) * KEEPALIVEPING which is a bit of a kludge because there's nothing * else for enabled/disabled status */ - return (ret & 0x01) ? 0 : WDIOF_KEEPALIVEPING; /* bits 1 - 7 are undefined */ + return (ret & 0x01) ? 0 : WDIOF_KEEPALIVEPING; + /* bits 1 - 7 are undefined */ } static int sc1200wdt_open(struct inode *inode, struct file *file) { /* allow one at a time */ - if (down_trylock(&open_sem)) + if (test_and_set_bit(0, &open_flag)) return -EBUSY; if (timeout > MAX_TIMEOUT) @@ -164,71 +186,71 @@ static int sc1200wdt_open(struct inode *inode, struct file *file) } -static int sc1200wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long sc1200wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_timeout; void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, .firmware_version = 0, .identity = "PC87307/PC97307", }; switch (cmd) { - default: - return -ENOTTY; - - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof ident)) - return -EFAULT; - return 0; - case WDIOC_GETSTATUS: - return put_user(sc1200wdt_status(), p); + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof ident)) + return -EFAULT; + return 0; - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); + case WDIOC_GETSTATUS: + return put_user(sc1200wdt_status(), p); - case WDIOC_KEEPALIVE: - sc1200wdt_write_data(WDTO, timeout); - return 0; + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - - /* the API states this is given in secs */ - new_timeout /= 60; - if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) - return -EINVAL; - - timeout = new_timeout; - sc1200wdt_write_data(WDTO, timeout); - /* fall through and return the new timeout */ - - case WDIOC_GETTIMEOUT: - return put_user(timeout * 60, p); + case WDIOC_KEEPALIVE: + sc1200wdt_write_data(WDTO, timeout); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + /* the API states this is given in secs */ + new_timeout /= 60; + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + timeout = new_timeout; + sc1200wdt_write_data(WDTO, timeout); + /* fall through and return the new timeout */ - case WDIOC_SETOPTIONS: - { - int options, retval = -EINVAL; + case WDIOC_GETTIMEOUT: + return put_user(timeout * 60, p); - if (get_user(options, p)) - return -EFAULT; + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; - if (options & WDIOS_DISABLECARD) { - sc1200wdt_stop(); - retval = 0; - } + if (get_user(options, p)) + return -EFAULT; - if (options & WDIOS_ENABLECARD) { - sc1200wdt_start(); - retval = 0; - } + if (options & WDIOS_DISABLECARD) { + sc1200wdt_stop(); + retval = 0; + } - return retval; + if (options & WDIOS_ENABLECARD) { + sc1200wdt_start(); + retval = 0; } + + return retval; + } + default: + return -ENOTTY; } } @@ -240,16 +262,18 @@ static int sc1200wdt_release(struct inode *inode, struct file *file) printk(KERN_INFO PFX "Watchdog disabled\n"); } else { sc1200wdt_write_data(WDTO, timeout); - printk(KERN_CRIT PFX "Unexpected close!, timeout = %d min(s)\n", timeout); + printk(KERN_CRIT PFX + "Unexpected close!, timeout = %d min(s)\n", timeout); } - up(&open_sem); + clear_bit(0, &open_flag); expect_close = 0; return 0; } -static ssize_t sc1200wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) +static ssize_t sc1200wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { if (len) { if (!nowayout) { @@ -275,7 +299,8 @@ static ssize_t sc1200wdt_write(struct file *file, const char __user *data, size_ } -static int sc1200wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) +static int sc1200wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) { if (code == SYS_DOWN || code == SYS_HALT) sc1200wdt_stop(); @@ -284,23 +309,20 @@ static int sc1200wdt_notify_sys(struct notifier_block *this, unsigned long code, } -static struct notifier_block sc1200wdt_notifier = -{ +static struct notifier_block sc1200wdt_notifier = { .notifier_call = sc1200wdt_notify_sys, }; -static const struct file_operations sc1200wdt_fops = -{ +static const struct file_operations sc1200wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = sc1200wdt_write, - .ioctl = sc1200wdt_ioctl, + .unlocked_ioctl = sc1200wdt_ioctl, .open = sc1200wdt_open, .release = sc1200wdt_release, }; -static struct miscdevice sc1200wdt_miscdev = -{ +static struct miscdevice sc1200wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &sc1200wdt_fops, @@ -312,14 +334,14 @@ static int __init sc1200wdt_probe(void) /* The probe works by reading the PMC3 register's default value of 0x0e * there is one caveat, if the device disables the parallel port or any * of the UARTs we won't be able to detect it. - * Nb. This could be done with accuracy by reading the SID registers, but - * we don't have access to those io regions. + * NB. This could be done with accuracy by reading the SID registers, + * but we don't have access to those io regions. */ unsigned char reg; sc1200wdt_read_data(PMC3, ®); - reg &= 0x0f; /* we don't want the UART busy bits */ + reg &= 0x0f; /* we don't want the UART busy bits */ return (reg == 0x0e) ? 0 : -ENODEV; } @@ -332,7 +354,8 @@ static struct pnp_device_id scl200wdt_pnp_devices[] = { {.id = ""}, }; -static int scl200wdt_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id) +static int scl200wdt_pnp_probe(struct pnp_dev *dev, + const struct pnp_device_id *dev_id) { /* this driver only supports one card at a time */ if (wdt_dev || !isapnp) @@ -347,13 +370,14 @@ static int scl200wdt_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id return -EBUSY; } - printk(KERN_INFO "scl200wdt: PnP device found at io port %#x/%d\n", io, io_len); + printk(KERN_INFO "scl200wdt: PnP device found at io port %#x/%d\n", + io, io_len); return 0; } -static void scl200wdt_pnp_remove(struct pnp_dev * dev) +static void scl200wdt_pnp_remove(struct pnp_dev *dev) { - if (wdt_dev){ + if (wdt_dev) { release_region(io, io_len); wdt_dev = NULL; } @@ -375,8 +399,6 @@ static int __init sc1200wdt_init(void) printk("%s\n", banner); - sema_init(&open_sem, 1); - #if defined CONFIG_PNP if (isapnp) { ret = pnp_register_driver(&scl200wdt_pnp_driver); @@ -410,13 +432,16 @@ static int __init sc1200wdt_init(void) ret = register_reboot_notifier(&sc1200wdt_notifier); if (ret) { - printk(KERN_ERR PFX "Unable to register reboot notifier err = %d\n", ret); + printk(KERN_ERR PFX + "Unable to register reboot notifier err = %d\n", ret); goto out_io; } ret = misc_register(&sc1200wdt_miscdev); if (ret) { - printk(KERN_ERR PFX "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR); + printk(KERN_ERR PFX + "Unable to register miscdev on minor %d\n", + WATCHDOG_MINOR); goto out_rbt; } @@ -446,7 +471,7 @@ static void __exit sc1200wdt_exit(void) unregister_reboot_notifier(&sc1200wdt_notifier); #if defined CONFIG_PNP - if(isapnp) + if (isapnp) pnp_unregister_driver(&scl200wdt_pnp_driver); else #endif -- cgit v1.2.3 From ff94806057fba557abd6295f7313f5f9e972a48f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:44 +0100 Subject: [WATCHDOG 43/57] sc520_wdt: Clean up and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sc520_wdt.c | 161 +++++++++++++++++++++++-------------------- 1 file changed, 86 insertions(+), 75 deletions(-) diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c index 2847324a2be2..525555a8779c 100644 --- a/drivers/watchdog/sc520_wdt.c +++ b/drivers/watchdog/sc520_wdt.c @@ -64,9 +64,9 @@ #include #include #include +#include +#include -#include -#include #include #define OUR_NAME "sc520_wdt" @@ -91,13 +91,18 @@ */ #define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ -static int timeout = WATCHDOG_TIMEOUT; /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +static int timeout = WATCHDOG_TIMEOUT; module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1 <= timeout <= 3600, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * AMD Elan SC520 - Watchdog Timer Registers @@ -136,8 +141,7 @@ static void wdt_timer_ping(unsigned long data) /* If we got a heartbeat pulse within the WDT_US_INTERVAL * we agree to ping the WDT */ - if(time_before(jiffies, next_heartbeat)) - { + if (time_before(jiffies, next_heartbeat)) { /* Ping the WDT */ spin_lock(&wdt_spinlock); writew(0xAAAA, wdtmrctl); @@ -146,9 +150,9 @@ static void wdt_timer_ping(unsigned long data) /* Re-set the timer interval */ mod_timer(&timer, jiffies + WDT_INTERVAL); - } else { - printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); - } + } else + printk(KERN_WARNING PFX + "Heartbeat lost! Will not ping the watchdog\n"); } /* @@ -162,7 +166,7 @@ static void wdt_config(int writeval) /* buy some time (ping) */ spin_lock_irqsave(&wdt_spinlock, flags); - dummy=readw(wdtmrctl); /* ensure write synchronization */ + dummy = readw(wdtmrctl); /* ensure write synchronization */ writew(0xAAAA, wdtmrctl); writew(0x5555, wdtmrctl); /* unlock WDT = make WDT configuration register writable one time */ @@ -219,10 +223,11 @@ static int wdt_set_heartbeat(int t) * /dev/watchdog handling */ -static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos) +static ssize_t fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ - if(count) { + if (count) { if (!nowayout) { size_t ofs; @@ -231,25 +236,26 @@ static ssize_t fop_write(struct file * file, const char __user * buf, size_t cou wdt_expect_close = 0; /* now scan */ - for(ofs = 0; ofs != count; ofs++) { + for (ofs = 0; ofs != count; ofs++) { char c; if (get_user(c, buf + ofs)) return -EFAULT; - if(c == 'V') + if (c == 'V') wdt_expect_close = 42; } } - /* Well, anyhow someone wrote to us, we should return that favour */ + /* Well, anyhow someone wrote to us, we should + return that favour */ wdt_keepalive(); } return count; } -static int fop_open(struct inode * inode, struct file * file) +static int fop_open(struct inode *inode, struct file *file) { /* Just in case we're already talking to someone... */ - if(test_and_set_bit(0, &wdt_is_open)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; if (nowayout) __module_get(THIS_MODULE); @@ -259,12 +265,13 @@ static int fop_open(struct inode * inode, struct file * file) return nonseekable_open(inode, file); } -static int fop_close(struct inode * inode, struct file * file) +static int fop_close(struct inode *inode, struct file *file) { - if(wdt_expect_close == 42) { + if (wdt_expect_close == 42) wdt_turnoff(); - } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + else { + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); wdt_keepalive(); } clear_bit(0, &wdt_is_open); @@ -272,63 +279,63 @@ static int fop_close(struct inode * inode, struct file * file) return 0; } -static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static int fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "SC520", }; - switch(cmd) + switch (cmd) { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; - case WDIOC_SETOPTIONS: - { - int new_options, retval = -EINVAL; - - if(get_user(new_options, p)) - return -EFAULT; - - if(new_options & WDIOS_DISABLECARD) { - wdt_turnoff(); - retval = 0; - } + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; - if(new_options & WDIOS_ENABLECARD) { - wdt_startup(); - retval = 0; - } + if (get_user(new_options, p)) + return -EFAULT; + + if (new_options & WDIOS_DISABLECARD) { + wdt_turnoff(); + retval = 0; + } - return retval; + if (new_options & WDIOS_ENABLECARD) { + wdt_startup(); + retval = 0; } - case WDIOC_SETTIMEOUT: - { - int new_timeout; - if(get_user(new_timeout, p)) - return -EFAULT; + return retval; + } + case WDIOC_SETTIMEOUT: + { + int new_timeout; - if(wdt_set_heartbeat(new_timeout)) - return -EINVAL; + if (get_user(new_timeout, p)) + return -EFAULT; - wdt_keepalive(); - /* Fall through */ - } - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); + if (wdt_set_heartbeat(new_timeout)) + return -EINVAL; + + wdt_keepalive(); + /* Fall through */ + } + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); } } @@ -354,7 +361,7 @@ static struct miscdevice wdt_miscdev = { static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if(code==SYS_DOWN || code==SYS_HALT) + if (code == SYS_DOWN || code == SYS_HALT) wdt_turnoff(); return NOTIFY_DONE; } @@ -383,11 +390,13 @@ static int __init sc520_wdt_init(void) { int rc = -EBUSY; - /* Check that the timeout value is within it's range ; if not reset to the default */ + /* Check that the timeout value is within it's range ; + if not reset to the default */ if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); - printk(KERN_INFO PFX "timeout value must be 1<=timeout<=3600, using %d\n", - WATCHDOG_TIMEOUT); + printk(KERN_INFO PFX + "timeout value must be 1 <= timeout <= 3600, using %d\n", + WATCHDOG_TIMEOUT); } wdtmrctl = ioremap((unsigned long)(MMCR_BASE + OFFS_WDTMRCTL), 2); @@ -399,20 +408,22 @@ static int __init sc520_wdt_init(void) rc = register_reboot_notifier(&wdt_notifier); if (rc) { - printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - rc); + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", rc); goto err_out_ioremap; } rc = misc_register(&wdt_miscdev); if (rc) { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, rc); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, rc); goto err_out_notifier; } - printk(KERN_INFO PFX "WDT driver for SC520 initialised. timeout=%d sec (nowayout=%d)\n", - timeout,nowayout); + printk(KERN_INFO PFX + "WDT driver for SC520 initialised. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); return 0; -- cgit v1.2.3 From 9b748ed03cabf533a815e5ffc50108a21c98e40c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:49 +0100 Subject: [WATCHDOG 44/57] scx200_wdt: clean up and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sc520_wdt.c | 4 +-- drivers/watchdog/scx200_wdt.c | 59 ++++++++++++++++++++++--------------------- 2 files changed, 32 insertions(+), 31 deletions(-) diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c index 525555a8779c..01de239f49e8 100644 --- a/drivers/watchdog/sc520_wdt.c +++ b/drivers/watchdog/sc520_wdt.c @@ -279,7 +279,7 @@ static int fop_close(struct inode *inode, struct file *file) return 0; } -static int fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -345,7 +345,7 @@ static const struct file_operations wdt_fops = { .write = fop_write, .open = fop_open, .release = fop_close, - .ioctl = fop_ioctl, + .unlocked_ioctl = fop_ioctl, }; static struct miscdevice wdt_miscdev = { diff --git a/drivers/watchdog/scx200_wdt.c b/drivers/watchdog/scx200_wdt.c index d55882bca319..7c1de94704f3 100644 --- a/drivers/watchdog/scx200_wdt.c +++ b/drivers/watchdog/scx200_wdt.c @@ -27,9 +27,8 @@ #include #include #include - -#include -#include +#include +#include #define NAME "scx200_wdt" @@ -47,8 +46,9 @@ module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); static u16 wdto_restart; -static struct semaphore open_semaphore; static char expect_close; +static unsigned long open_lock; +static DEFINE_SPINLOCK(scx_lock); /* Bits of the WDCNFG register */ #define W_ENABLE 0x00fa /* Enable watchdog */ @@ -59,7 +59,9 @@ static char expect_close; static void scx200_wdt_ping(void) { + spin_lock(&scx_lock); outw(wdto_restart, scx200_cb_base + SCx200_WDT_WDTO); + spin_unlock(&scx_lock); } static void scx200_wdt_update_margin(void) @@ -73,9 +75,11 @@ static void scx200_wdt_enable(void) printk(KERN_DEBUG NAME ": enabling watchdog timer, wdto_restart = %d\n", wdto_restart); + spin_lock(&scx_lock); outw(0, scx200_cb_base + SCx200_WDT_WDTO); outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS); outw(W_ENABLE, scx200_cb_base + SCx200_WDT_WDCNFG); + spin_unlock(&scx_lock); scx200_wdt_ping(); } @@ -84,15 +88,17 @@ static void scx200_wdt_disable(void) { printk(KERN_DEBUG NAME ": disabling watchdog timer\n"); + spin_lock(&scx_lock); outw(0, scx200_cb_base + SCx200_WDT_WDTO); outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS); outw(W_DISABLE, scx200_cb_base + SCx200_WDT_WDCNFG); + spin_unlock(&scx_lock); } static int scx200_wdt_open(struct inode *inode, struct file *file) { /* only allow one at a time */ - if (down_trylock(&open_semaphore)) + if (test_and_set_bit(0, &open_lock)) return -EBUSY; scx200_wdt_enable(); @@ -101,13 +107,12 @@ static int scx200_wdt_open(struct inode *inode, struct file *file) static int scx200_wdt_release(struct inode *inode, struct file *file) { - if (expect_close != 42) { + if (expect_close != 42) printk(KERN_WARNING NAME ": watchdog device closed unexpectedly, will not disable the watchdog timer\n"); - } else if (!nowayout) { + else if (!nowayout) scx200_wdt_disable(); - } expect_close = 0; - up(&open_semaphore); + clear_bit(0, &open_lock); return 0; } @@ -122,8 +127,7 @@ static int scx200_wdt_notify_sys(struct notifier_block *this, return NOTIFY_DONE; } -static struct notifier_block scx200_wdt_notifier = -{ +static struct notifier_block scx200_wdt_notifier = { .notifier_call = scx200_wdt_notify_sys, }; @@ -131,8 +135,7 @@ static ssize_t scx200_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) { /* check for a magic close character */ - if (len) - { + if (len) { size_t i; scx200_wdt_ping(); @@ -152,15 +155,15 @@ static ssize_t scx200_wdt_write(struct file *file, const char __user *data, return 0; } -static int scx200_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long scx200_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident = { + static const struct watchdog_info ident = { .identity = "NatSemi SCx200 Watchdog", .firmware_version = 1, - .options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING), + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, }; int new_margin; @@ -168,7 +171,7 @@ static int scx200_wdt_ioctl(struct inode *inode, struct file *file, default: return -ENOTTY; case WDIOC_GETSUPPORT: - if(copy_to_user(argp, &ident, sizeof(ident))) + if (copy_to_user(argp, &ident, sizeof(ident))) return -EFAULT; return 0; case WDIOC_GETSTATUS: @@ -195,18 +198,18 @@ static int scx200_wdt_ioctl(struct inode *inode, struct file *file, } static const struct file_operations scx200_wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = scx200_wdt_write, - .ioctl = scx200_wdt_ioctl, - .open = scx200_wdt_open, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = scx200_wdt_write, + .unlocked_ioctl = scx200_wdt_ioctl, + .open = scx200_wdt_open, .release = scx200_wdt_release, }; static struct miscdevice scx200_wdt_miscdev = { .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &scx200_wdt_fops, + .name = "watchdog", + .fops = &scx200_wdt_fops, }; static int __init scx200_wdt_init(void) @@ -229,8 +232,6 @@ static int __init scx200_wdt_init(void) scx200_wdt_update_margin(); scx200_wdt_disable(); - sema_init(&open_semaphore, 1); - r = register_reboot_notifier(&scx200_wdt_notifier); if (r) { printk(KERN_ERR NAME ": unable to register reboot notifier"); @@ -263,7 +264,7 @@ module_exit(scx200_wdt_cleanup); /* Local variables: - compile-command: "make -k -C ../.. SUBDIRS=drivers/char modules" - c-basic-offset: 8 + compile-command: "make -k -C ../.. SUBDIRS=drivers/char modules" + c-basic-offset: 8 End: */ -- cgit v1.2.3 From 70b814ec1a484279a51bf9f7193551b996627247 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:55 +0100 Subject: [WATCHDOG 45/57] shwdt: coding style, cleanup, switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/shwdt.c | 139 ++++++++++++++++++++++++++++------------------- 1 file changed, 82 insertions(+), 57 deletions(-) diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c index 1277f7e9cc54..60f0036aaca6 100644 --- a/drivers/watchdog/shwdt.c +++ b/drivers/watchdog/shwdt.c @@ -28,9 +28,9 @@ #include #include #include -#include -#include -#include +#include +#include +#include #define PFX "shwdt: " @@ -72,6 +72,7 @@ static struct watchdog_info sh_wdt_info; static char shwdt_expect_close; static DEFINE_TIMER(timer, sh_wdt_ping, 0, 0); static unsigned long next_heartbeat; +static DEFINE_SPINLOCK(shwdt_lock); #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ @@ -86,6 +87,9 @@ static int nowayout = WATCHDOG_NOWAYOUT; static void sh_wdt_start(void) { __u8 csr; + unsigned long flags; + + spin_lock_irqsave(&wdt_lock, flags); next_heartbeat = jiffies + (heartbeat * HZ); mod_timer(&timer, next_ping_period(clock_division_ratio)); @@ -123,6 +127,7 @@ static void sh_wdt_start(void) csr &= ~RSTCSR_RSTS; sh_wdt_write_rstcsr(csr); #endif + spin_unlock_irqrestore(&wdt_lock, flags); } /** @@ -132,12 +137,16 @@ static void sh_wdt_start(void) static void sh_wdt_stop(void) { __u8 csr; + unsigned long flags; + + spin_lock_irqsave(&wdt_lock, flags); del_timer(&timer); csr = sh_wdt_read_csr(); csr &= ~WTCSR_TME; sh_wdt_write_csr(csr); + spin_unlock_irqrestore(&wdt_lock, flags); } /** @@ -146,7 +155,11 @@ static void sh_wdt_stop(void) */ static inline void sh_wdt_keepalive(void) { + unsigned long flags; + + spin_lock_irqsave(&wdt_lock, flags); next_heartbeat = jiffies + (heartbeat * HZ); + spin_unlock_irqrestore(&wdt_lock, flags); } /** @@ -155,10 +168,14 @@ static inline void sh_wdt_keepalive(void) */ static int sh_wdt_set_heartbeat(int t) { - if (unlikely((t < 1) || (t > 3600))) /* arbitrary upper limit */ + unsigned long flags; + + if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */ return -EINVAL; + spin_lock_irqsave(&wdt_lock, flags); heartbeat = t; + spin_unlock_irqrestore(&wdt_lock, flags); return 0; } @@ -170,6 +187,9 @@ static int sh_wdt_set_heartbeat(int t) */ static void sh_wdt_ping(unsigned long data) { + unsigned long flags; + + spin_lock_irqsave(&wdt_lock, flags); if (time_before(jiffies, next_heartbeat)) { __u8 csr; @@ -183,6 +203,7 @@ static void sh_wdt_ping(unsigned long data) } else printk(KERN_WARNING PFX "Heartbeat lost! Will not ping " "the watchdog\n"); + spin_unlock_irqrestore(&wdt_lock, flags); } /** @@ -310,7 +331,6 @@ static int sh_wdt_mmap(struct file *file, struct vm_area_struct *vma) /** * sh_wdt_ioctl - Query Device - * @inode: inode of device * @file: file handle of device * @cmd: watchdog command * @arg: argument @@ -318,53 +338,51 @@ static int sh_wdt_mmap(struct file *file, struct vm_area_struct *vma) * Query basic information from the device or ping it, as outlined by the * watchdog API. */ -static int sh_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long sh_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_heartbeat; int options, retval = -EINVAL; switch (cmd) { - case WDIOC_GETSUPPORT: - return copy_to_user((struct watchdog_info *)arg, - &sh_wdt_info, - sizeof(sh_wdt_info)) ? -EFAULT : 0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, (int *)arg); - case WDIOC_KEEPALIVE: - sh_wdt_keepalive(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_heartbeat, (int *)arg)) - return -EFAULT; - - if (sh_wdt_set_heartbeat(new_heartbeat)) - return -EINVAL; - - sh_wdt_keepalive(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, (int *)arg); - case WDIOC_SETOPTIONS: - if (get_user(options, (int *)arg)) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) { - sh_wdt_stop(); - retval = 0; - } + case WDIOC_GETSUPPORT: + return copy_to_user((struct watchdog_info *)arg, + &sh_wdt_info, sizeof(sh_wdt_info)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, (int *)arg); + case WDIOC_KEEPALIVE: + sh_wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, (int *)arg)) + return -EFAULT; - if (options & WDIOS_ENABLECARD) { - sh_wdt_start(); - retval = 0; - } + if (sh_wdt_set_heartbeat(new_heartbeat)) + return -EINVAL; - return retval; - default: - return -ENOTTY; - } + sh_wdt_keepalive(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, (int *)arg); + case WDIOC_SETOPTIONS: + if (get_user(options, (int *)arg)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + sh_wdt_stop(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + sh_wdt_start(); + retval = 0; + } + return retval; + default: + return -ENOTTY; + } return 0; } @@ -390,13 +408,13 @@ static const struct file_operations sh_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = sh_wdt_write, - .ioctl = sh_wdt_ioctl, + .unlocked_ioctl = sh_wdt_ioctl, .open = sh_wdt_open, .release = sh_wdt_close, .mmap = sh_wdt_mmap, }; -static struct watchdog_info sh_wdt_info = { +static const struct watchdog_info sh_wdt_info = { .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, .firmware_version = 1, @@ -422,30 +440,33 @@ static int __init sh_wdt_init(void) { int rc; - if ((clock_division_ratio < 0x5) || (clock_division_ratio > 0x7)) { + if (clock_division_ratio < 0x5 || clock_division_ratio > 0x7) { clock_division_ratio = WTCSR_CKS_4096; - printk(KERN_INFO PFX "clock_division_ratio value must " - "be 0x5<=x<=0x7, using %d\n", clock_division_ratio); + printk(KERN_INFO PFX + "clock_division_ratio value must be 0x5<=x<=0x7, using %d\n", + clock_division_ratio); } rc = sh_wdt_set_heartbeat(heartbeat); if (unlikely(rc)) { heartbeat = WATCHDOG_HEARTBEAT; - printk(KERN_INFO PFX "heartbeat value must " - "be 1<=x<=3600, using %d\n", heartbeat); + printk(KERN_INFO PFX + "heartbeat value must be 1<=x<=3600, using %d\n", + heartbeat); } rc = register_reboot_notifier(&sh_wdt_notifier); if (unlikely(rc)) { - printk(KERN_ERR PFX "Can't register reboot notifier (err=%d)\n", - rc); + printk(KERN_ERR PFX + "Can't register reboot notifier (err=%d)\n", rc); return rc; } rc = misc_register(&sh_wdt_miscdev); if (unlikely(rc)) { - printk(KERN_ERR PFX "Can't register miscdev on " - "minor=%d (err=%d)\n", sh_wdt_miscdev.minor, rc); + printk(KERN_ERR PFX + "Can't register miscdev on minor=%d (err=%d)\n", + sh_wdt_miscdev.minor, rc); unregister_reboot_notifier(&sh_wdt_notifier); return rc; } @@ -476,10 +497,14 @@ module_param(clock_division_ratio, int, 0); MODULE_PARM_DESC(clock_division_ratio, "Clock division ratio. Valid ranges are from 0x5 (1.31ms) to 0x7 (5.25ms). (default=" __MODULE_STRING(clock_division_ratio) ")"); module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1<=heartbeat<=3600, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); +MODULE_PARM_DESC(heartbeat, + "Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=" + __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); module_init(sh_wdt_init); module_exit(sh_wdt_exit); -- cgit v1.2.3 From 598467938dd8bcdcd4d88e9102c609f4caa9d9ef Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:00 +0100 Subject: [WATCHDOG 46/57] smsc37b787_wdt: coding style, switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/smsc37b787_wdt.c | 442 +++++++++++++++++++------------------- 1 file changed, 222 insertions(+), 220 deletions(-) diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c index 5d2b5ba61414..b7c6394b7d70 100644 --- a/drivers/watchdog/smsc37b787_wdt.c +++ b/drivers/watchdog/smsc37b787_wdt.c @@ -18,7 +18,7 @@ * History: * 2003 - Created version 1.0 for Linux 2.4.x. * 2006 - Ported to Linux 2.6, added nowayout and MAGICCLOSE - * features. Released version 1.1 + * features. Released version 1.1 * * Theory of operation: * @@ -55,9 +55,9 @@ #include #include #include +#include +#include -#include -#include #include /* enable support for minutes as units? */ @@ -71,15 +71,15 @@ #define UNIT_MINUTE 1 #define MODNAME "smsc37b787_wdt: " -#define VERSION "1.1" +#define VERSION "1.1" -#define IOPORT 0x3F0 +#define IOPORT 0x3F0 #define IOPORT_SIZE 2 -#define IODEV_NO 8 +#define IODEV_NO 8 -static int unit = UNIT_SECOND; /* timer's unit */ -static int timeout = 60; /* timeout value: default is 60 "units" */ -static unsigned long timer_enabled = 0; /* is the timer enabled? */ +static int unit = UNIT_SECOND; /* timer's unit */ +static int timeout = 60; /* timeout value: default is 60 "units" */ +static unsigned long timer_enabled; /* is the timer enabled? */ static char expect_close; /* is the close expected? */ @@ -93,114 +93,121 @@ static int nowayout = WATCHDOG_NOWAYOUT; static inline void open_io_config(void) { - outb(0x55, IOPORT); + outb(0x55, IOPORT); mdelay(1); - outb(0x55, IOPORT); + outb(0x55, IOPORT); } /* lock the IO chip */ static inline void close_io_config(void) { - outb(0xAA, IOPORT); + outb(0xAA, IOPORT); } /* select the IO device */ static inline void select_io_device(unsigned char devno) { - outb(0x07, IOPORT); - outb(devno, IOPORT+1); + outb(0x07, IOPORT); + outb(devno, IOPORT+1); } /* write to the control register */ static inline void write_io_cr(unsigned char reg, unsigned char data) { - outb(reg, IOPORT); - outb(data, IOPORT+1); + outb(reg, IOPORT); + outb(data, IOPORT+1); } /* read from the control register */ static inline char read_io_cr(unsigned char reg) { - outb(reg, IOPORT); - return inb(IOPORT+1); + outb(reg, IOPORT); + return inb(IOPORT+1); } /* -- Medium level functions ------------------------------------*/ static inline void gpio_bit12(unsigned char reg) { - // -- General Purpose I/O Bit 1.2 -- - // Bit 0, In/Out: 0 = Output, 1 = Input - // Bit 1, Polarity: 0 = No Invert, 1 = Invert - // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable - // Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17, - // 11 = Either Edge Triggered Intr. 2 - // Bit 5/6 (Reserved) - // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain - write_io_cr(0xE2, reg); + /* -- General Purpose I/O Bit 1.2 -- + * Bit 0, In/Out: 0 = Output, 1 = Input + * Bit 1, Polarity: 0 = No Invert, 1 = Invert + * Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable + * Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17, + * 11 = Either Edge Triggered Intr. 2 + * Bit 5/6 (Reserved) + * Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain + */ + write_io_cr(0xE2, reg); } static inline void gpio_bit13(unsigned char reg) { - // -- General Purpose I/O Bit 1.3 -- - // Bit 0, In/Out: 0 = Output, 1 = Input - // Bit 1, Polarity: 0 = No Invert, 1 = Invert - // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable - // Bit 3, Function select: 0 = GPI/O, 1 = LED - // Bit 4-6 (Reserved) - // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain - write_io_cr(0xE3, reg); + /* -- General Purpose I/O Bit 1.3 -- + * Bit 0, In/Out: 0 = Output, 1 = Input + * Bit 1, Polarity: 0 = No Invert, 1 = Invert + * Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable + * Bit 3, Function select: 0 = GPI/O, 1 = LED + * Bit 4-6 (Reserved) + * Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain + */ + write_io_cr(0xE3, reg); } static inline void wdt_timer_units(unsigned char new_units) { - // -- Watchdog timer units -- - // Bit 0-6 (Reserved) - // Bit 7, WDT Time-out Value Units Select - // (0 = Minutes, 1 = Seconds) - write_io_cr(0xF1, new_units); + /* -- Watchdog timer units -- + * Bit 0-6 (Reserved) + * Bit 7, WDT Time-out Value Units Select + * (0 = Minutes, 1 = Seconds) + */ + write_io_cr(0xF1, new_units); } static inline void wdt_timeout_value(unsigned char new_timeout) { - // -- Watchdog Timer Time-out Value -- - // Bit 0-7 Binary coded units (0=Disabled, 1..255) - write_io_cr(0xF2, new_timeout); + /* -- Watchdog Timer Time-out Value -- + * Bit 0-7 Binary coded units (0=Disabled, 1..255) + */ + write_io_cr(0xF2, new_timeout); } static inline void wdt_timer_conf(unsigned char conf) { - // -- Watchdog timer configuration -- - // Bit 0 Joystick enable: 0* = No Reset, 1 = Reset WDT upon Gameport I/O - // Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr. - // Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr. - // Bit 3 Reset the timer - // (Wrong in SMsC documentation? Given as: PowerLED Timout Enabled) - // Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled, - // 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15) - write_io_cr(0xF3, conf); + /* -- Watchdog timer configuration -- + * Bit 0 Joystick enable: 0* = No Reset, 1 = Reset WDT upon + * Gameport I/O + * Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr. + * Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr + * Bit 3 Reset the timer + * (Wrong in SMsC documentation? Given as: PowerLED Timout + * Enabled) + * Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled, + * 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15) + */ + write_io_cr(0xF3, conf); } static inline void wdt_timer_ctrl(unsigned char reg) { - // -- Watchdog timer control -- - // Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured - // Bit 1 Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz - // Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning) - // Bit 3 P20 Force Timeout enabled: - // 0 = P20 activity does not generate the WD timeout event - // 1 = P20 Allows rising edge of P20, from the keyboard - // controller, to force the WD timeout event. - // Bit 4 (Reserved) - // -- Soft power management -- - // Bit 5 Stop Counter: 1 = Stop software power down counter - // set via register 0xB8, (self-cleaning) - // (Upon read: 0 = Counter running, 1 = Counter stopped) - // Bit 6 Restart Counter: 1 = Restart software power down counter - // set via register 0xB8, (self-cleaning) - // Bit 7 SPOFF: 1 = Force software power down (self-cleaning) - - write_io_cr(0xF4, reg); + /* -- Watchdog timer control -- + * Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured + * Bit 1 Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz + * Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning) + * Bit 3 P20 Force Timeout enabled: + * 0 = P20 activity does not generate the WD timeout event + * 1 = P20 Allows rising edge of P20, from the keyboard + * controller, to force the WD timeout event. + * Bit 4 (Reserved) + * -- Soft power management -- + * Bit 5 Stop Counter: 1 = Stop software power down counter + * set via register 0xB8, (self-cleaning) + * (Upon read: 0 = Counter running, 1 = Counter stopped) + * Bit 6 Restart Counter: 1 = Restart software power down counter + * set via register 0xB8, (self-cleaning) + * Bit 7 SPOFF: 1 = Force software power down (self-cleaning) + */ + write_io_cr(0xF4, reg); } /* -- Higher level functions ------------------------------------*/ @@ -209,33 +216,34 @@ static inline void wdt_timer_ctrl(unsigned char reg) static void wb_smsc_wdt_initialize(void) { - unsigned char old; + unsigned char old; spin_lock(&io_lock); - open_io_config(); - select_io_device(IODEV_NO); + open_io_config(); + select_io_device(IODEV_NO); - // enable the watchdog - gpio_bit13(0x08); // Select pin 80 = LED not GPIO - gpio_bit12(0x0A); // Set pin 79 = WDT not GPIO/Output/Polarity=Invert + /* enable the watchdog */ + gpio_bit13(0x08); /* Select pin 80 = LED not GPIO */ + gpio_bit12(0x0A); /* Set pin 79 = WDT not + GPIO/Output/Polarity=Invert */ + /* disable the timeout */ + wdt_timeout_value(0); - // disable the timeout - wdt_timeout_value(0); + /* reset control register */ + wdt_timer_ctrl(0x00); - // reset control register - wdt_timer_ctrl(0x00); - - // reset configuration register + /* reset configuration register */ wdt_timer_conf(0x00); - // read old (timer units) register - old = read_io_cr(0xF1) & 0x7F; - if (unit == UNIT_SECOND) old |= 0x80; // set to seconds + /* read old (timer units) register */ + old = read_io_cr(0xF1) & 0x7F; + if (unit == UNIT_SECOND) + old |= 0x80; /* set to seconds */ - // set the watchdog timer units - wdt_timer_units(old); + /* set the watchdog timer units */ + wdt_timer_units(old); - close_io_config(); + close_io_config(); spin_unlock(&io_lock); } @@ -244,23 +252,23 @@ static void wb_smsc_wdt_initialize(void) static void wb_smsc_wdt_shutdown(void) { spin_lock(&io_lock); - open_io_config(); - select_io_device(IODEV_NO); + open_io_config(); + select_io_device(IODEV_NO); - // disable the watchdog - gpio_bit13(0x09); - gpio_bit12(0x09); + /* disable the watchdog */ + gpio_bit13(0x09); + gpio_bit12(0x09); - // reset watchdog config register + /* reset watchdog config register */ wdt_timer_conf(0x00); - // reset watchdog control register - wdt_timer_ctrl(0x00); + /* reset watchdog control register */ + wdt_timer_ctrl(0x00); - // disable timeout - wdt_timeout_value(0x00); + /* disable timeout */ + wdt_timeout_value(0x00); - close_io_config(); + close_io_config(); spin_unlock(&io_lock); } @@ -269,16 +277,16 @@ static void wb_smsc_wdt_shutdown(void) static void wb_smsc_wdt_set_timeout(unsigned char new_timeout) { spin_lock(&io_lock); - open_io_config(); - select_io_device(IODEV_NO); + open_io_config(); + select_io_device(IODEV_NO); - // set Power LED to blink, if we enable the timeout - wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02); + /* set Power LED to blink, if we enable the timeout */ + wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02); - // set timeout value - wdt_timeout_value(new_timeout); + /* set timeout value */ + wdt_timeout_value(new_timeout); - close_io_config(); + close_io_config(); spin_unlock(&io_lock); } @@ -286,32 +294,32 @@ static void wb_smsc_wdt_set_timeout(unsigned char new_timeout) static unsigned char wb_smsc_wdt_get_timeout(void) { - unsigned char set_timeout; + unsigned char set_timeout; spin_lock(&io_lock); - open_io_config(); - select_io_device(IODEV_NO); - set_timeout = read_io_cr(0xF2); - close_io_config(); + open_io_config(); + select_io_device(IODEV_NO); + set_timeout = read_io_cr(0xF2); + close_io_config(); spin_unlock(&io_lock); - return set_timeout; + return set_timeout; } /* disable watchdog */ static void wb_smsc_wdt_disable(void) { - // set the timeout to 0 to disable the watchdog - wb_smsc_wdt_set_timeout(0); + /* set the timeout to 0 to disable the watchdog */ + wb_smsc_wdt_set_timeout(0); } /* enable watchdog by setting the current timeout */ static void wb_smsc_wdt_enable(void) { - // set the current timeout... - wb_smsc_wdt_set_timeout(timeout); + /* set the current timeout... */ + wb_smsc_wdt_set_timeout(timeout); } /* reset the timer */ @@ -319,14 +327,14 @@ static void wb_smsc_wdt_enable(void) static void wb_smsc_wdt_reset_timer(void) { spin_lock(&io_lock); - open_io_config(); - select_io_device(IODEV_NO); + open_io_config(); + select_io_device(IODEV_NO); - // reset the timer + /* reset the timer */ wdt_timeout_value(timeout); wdt_timer_conf(0x08); - close_io_config(); + close_io_config(); spin_unlock(&io_lock); } @@ -355,7 +363,9 @@ static int wb_smsc_wdt_open(struct inode *inode, struct file *file) /* Reload and activate timer */ wb_smsc_wdt_enable(); - printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); + printk(KERN_INFO MODNAME + "Watchdog enabled. Timeout set to %d %s.\n", + timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); return nonseekable_open(inode, file); } @@ -367,10 +377,12 @@ static int wb_smsc_wdt_release(struct inode *inode, struct file *file) /* Shut off the timer. */ if (expect_close == 42) { - wb_smsc_wdt_disable(); - printk(KERN_INFO MODNAME "Watchdog disabled, sleeping again...\n"); + wb_smsc_wdt_disable(); + printk(KERN_INFO MODNAME + "Watchdog disabled, sleeping again...\n"); } else { - printk(KERN_CRIT MODNAME "Unexpected close, not stopping watchdog!\n"); + printk(KERN_CRIT MODNAME + "Unexpected close, not stopping watchdog!\n"); wb_smsc_wdt_reset_timer(); } @@ -392,7 +404,8 @@ static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data, /* reset expect flag */ expect_close = 0; - /* scan to see whether or not we got the magic character */ + /* scan to see whether or not we got the + magic character */ for (i = 0; i != len; i++) { char c; if (get_user(c, data+i)) @@ -410,8 +423,8 @@ static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data, /* ioctl => control interface */ -static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long wb_smsc_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { int new_timeout; @@ -420,9 +433,9 @@ static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file, int __user *i; } uarg; - static struct watchdog_info ident = { + static const struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING | - WDIOF_SETTIMEOUT | + WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, .firmware_version = 0, .identity = "SMsC 37B787 Watchdog" @@ -431,78 +444,62 @@ static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file, uarg.i = (int __user *)arg; switch (cmd) { - default: - return -ENOTTY; - - case WDIOC_GETSUPPORT: - return copy_to_user(uarg.ident, &ident, - sizeof(ident)) ? -EFAULT : 0; - - case WDIOC_GETSTATUS: - return put_user(wb_smsc_wdt_status(), uarg.i); - - case WDIOC_GETBOOTSTATUS: - return put_user(0, uarg.i); - - case WDIOC_KEEPALIVE: - wb_smsc_wdt_reset_timer(); - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, uarg.i)) - return -EFAULT; - - // the API states this is given in secs - if (unit == UNIT_MINUTE) - new_timeout /= 60; - - if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) - return -EINVAL; - - timeout = new_timeout; - wb_smsc_wdt_set_timeout(timeout); - - // fall through and return the new timeout... - - case WDIOC_GETTIMEOUT: - - new_timeout = timeout; - - if (unit == UNIT_MINUTE) + case WDIOC_GETSUPPORT: + return copy_to_user(uarg.ident, &ident, sizeof(ident)) + ? -EFAULT : 0; + case WDIOC_GETSTATUS: + return put_user(wb_smsc_wdt_status(), uarg.i); + case WDIOC_GETBOOTSTATUS: + return put_user(0, uarg.i); + case WDIOC_KEEPALIVE: + wb_smsc_wdt_reset_timer(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, uarg.i)) + return -EFAULT; + /* the API states this is given in secs */ + if (unit == UNIT_MINUTE) + new_timeout /= 60; + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + timeout = new_timeout; + wb_smsc_wdt_set_timeout(timeout); + /* fall through and return the new timeout... */ + case WDIOC_GETTIMEOUT: + new_timeout = timeout; + if (unit == UNIT_MINUTE) new_timeout *= 60; + return put_user(new_timeout, uarg.i); + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; - return put_user(new_timeout, uarg.i); - - case WDIOC_SETOPTIONS: - { - int options, retval = -EINVAL; - - if (get_user(options, uarg.i)) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) { - wb_smsc_wdt_disable(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) { - wb_smsc_wdt_enable(); - retval = 0; - } + if (get_user(options, uarg.i)) + return -EFAULT; - return retval; + if (options & WDIOS_DISABLECARD) { + wb_smsc_wdt_disable(); + retval = 0; } + if (options & WDIOS_ENABLECARD) { + wb_smsc_wdt_enable(); + retval = 0; + } + return retval; + } + default: + return -ENOTTY; } } /* -- Notifier funtions -----------------------------------------*/ -static int wb_smsc_wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) +static int wb_smsc_wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) { - if (code == SYS_DOWN || code == SYS_HALT) - { - // set timeout to 0, to avoid possible race-condition - timeout = 0; + if (code == SYS_DOWN || code == SYS_HALT) { + /* set timeout to 0, to avoid possible race-condition */ + timeout = 0; wb_smsc_wdt_disable(); } return NOTIFY_DONE; @@ -510,23 +507,20 @@ static int wb_smsc_wdt_notify_sys(struct notifier_block *this, unsigned long cod /* -- Module's structures ---------------------------------------*/ -static const struct file_operations wb_smsc_wdt_fops = -{ - .owner = THIS_MODULE, +static const struct file_operations wb_smsc_wdt_fops = { + .owner = THIS_MODULE, .llseek = no_llseek, .write = wb_smsc_wdt_write, - .ioctl = wb_smsc_wdt_ioctl, + .unlocked_ioctl = wb_smsc_wdt_ioctl, .open = wb_smsc_wdt_open, .release = wb_smsc_wdt_release, }; -static struct notifier_block wb_smsc_wdt_notifier = -{ +static struct notifier_block wb_smsc_wdt_notifier = { .notifier_call = wb_smsc_wdt_notify_sys, }; -static struct miscdevice wb_smsc_wdt_miscdev = -{ +static struct miscdevice wb_smsc_wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &wb_smsc_wdt_fops, @@ -540,39 +534,44 @@ static int __init wb_smsc_wdt_init(void) { int ret; - printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n"); + printk(KERN_INFO "SMsC 37B787 watchdog component driver " + VERSION " initialising...\n"); if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) { - printk(KERN_ERR MODNAME "Unable to register IO port %#x\n", IOPORT); + printk(KERN_ERR MODNAME "Unable to register IO port %#x\n", + IOPORT); ret = -EBUSY; goto out_pnp; } - // set new maximum, if it's too big - if (timeout > MAX_TIMEOUT) - timeout = MAX_TIMEOUT; + /* set new maximum, if it's too big */ + if (timeout > MAX_TIMEOUT) + timeout = MAX_TIMEOUT; - // init the watchdog timer - wb_smsc_wdt_initialize(); + /* init the watchdog timer */ + wb_smsc_wdt_initialize(); ret = register_reboot_notifier(&wb_smsc_wdt_notifier); if (ret) { - printk(KERN_ERR MODNAME "Unable to register reboot notifier err = %d\n", ret); + printk(KERN_ERR MODNAME + "Unable to register reboot notifier err = %d\n", ret); goto out_io; } ret = misc_register(&wb_smsc_wdt_miscdev); if (ret) { - printk(KERN_ERR MODNAME "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR); + printk(KERN_ERR MODNAME + "Unable to register miscdev on minor %d\n", + WATCHDOG_MINOR); goto out_rbt; } - // output info - printk(KERN_INFO MODNAME "Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); - printk(KERN_INFO MODNAME "Watchdog initialized and sleeping (nowayout=%d)...\n", nowayout); - - // ret = 0 - + /* output info */ + printk(KERN_INFO MODNAME "Timeout set to %d %s.\n", + timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); + printk(KERN_INFO MODNAME + "Watchdog initialized and sleeping (nowayout=%d)...\n", + nowayout); out_clean: return ret; @@ -591,8 +590,7 @@ out_pnp: static void __exit wb_smsc_wdt_exit(void) { /* Stop the timer before we leave */ - if (!nowayout) - { + if (!nowayout) { wb_smsc_wdt_shutdown(); printk(KERN_INFO MODNAME "Watchdog disabled.\n"); } @@ -601,25 +599,29 @@ static void __exit wb_smsc_wdt_exit(void) unregister_reboot_notifier(&wb_smsc_wdt_notifier); release_region(IOPORT, IOPORT_SIZE); - printk("SMsC 37B787 watchdog component driver removed.\n"); + printk(KERN_INFO "SMsC 37B787 watchdog component driver removed.\n"); } module_init(wb_smsc_wdt_init); module_exit(wb_smsc_wdt_exit); MODULE_AUTHOR("Sven Anders "); -MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version " VERSION ")"); +MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version " + VERSION ")"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); #ifdef SMSC_SUPPORT_MINUTES module_param(unit, int, 0); -MODULE_PARM_DESC(unit, "set unit to use, 0=seconds or 1=minutes, default is 0"); +MODULE_PARM_DESC(unit, + "set unit to use, 0=seconds or 1=minutes, default is 0"); #endif module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60"); module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -- cgit v1.2.3 From f92d3749d70265468e28643652c0e32c5a56cd2b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:06 +0100 Subject: [WATCHDOG 47/57] softdog: clean up, coding style and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/softdog.c | 87 ++++++++++++++++++++++++---------------------- 1 file changed, 46 insertions(+), 41 deletions(-) diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c index 9c3694909243..bb3c75eed9df 100644 --- a/drivers/watchdog/softdog.c +++ b/drivers/watchdog/softdog.c @@ -47,19 +47,22 @@ #include #include #include - -#include +#include #define PFX "SoftDog: " #define TIMER_MARGIN 60 /* Default is 60 seconds */ static int soft_margin = TIMER_MARGIN; /* in seconds */ module_param(soft_margin, int, 0); -MODULE_PARM_DESC(soft_margin, "Watchdog soft_margin in seconds. (0 Date: Mon, 19 May 2008 14:09:12 +0100 Subject: [WATCHDOG 48/57] txx9: Fix locking, switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/txx9wdt.c | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c index 57cefef27ce3..b729cc447df3 100644 --- a/drivers/watchdog/txx9wdt.c +++ b/drivers/watchdog/txx9wdt.c @@ -45,27 +45,34 @@ static unsigned long txx9wdt_alive; static int expect_close; static struct txx9_tmr_reg __iomem *txx9wdt_reg; static struct clk *txx9_imclk; +static DECLARE_LOCK(txx9_lock); static void txx9wdt_ping(void) { + spin_lock(&txx9_lock); __raw_writel(TXx9_TMWTMR_TWIE | TXx9_TMWTMR_TWC, &txx9wdt_reg->wtmr); + spin_unlock(&txx9_lock); } static void txx9wdt_start(void) { + spin_lock(&txx9_lock); __raw_writel(WD_TIMER_CLK * timeout, &txx9wdt_reg->cpra); __raw_writel(WD_TIMER_CCD, &txx9wdt_reg->ccdr); __raw_writel(0, &txx9wdt_reg->tisr); /* clear pending interrupt */ __raw_writel(TXx9_TMTCR_TCE | TXx9_TMTCR_CCDE | TXx9_TMTCR_TMODE_WDOG, &txx9wdt_reg->tcr); __raw_writel(TXx9_TMWTMR_TWIE | TXx9_TMWTMR_TWC, &txx9wdt_reg->wtmr); + spin_unlock(&txx9_lock); } static void txx9wdt_stop(void) { + spin_lock(&txx9_lock); __raw_writel(TXx9_TMWTMR_WDIS, &txx9wdt_reg->wtmr); __raw_writel(__raw_readl(&txx9wdt_reg->tcr) & ~TXx9_TMTCR_TCE, &txx9wdt_reg->tcr); + spin_unlock(&txx9_lock); } static int txx9wdt_open(struct inode *inode, struct file *file) @@ -120,13 +127,13 @@ static ssize_t txx9wdt_write(struct file *file, const char __user *data, return len; } -static int txx9wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long txx9wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; int new_timeout; - static struct watchdog_info ident = { + static const struct watchdog_info ident = { .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, @@ -168,18 +175,18 @@ static int txx9wdt_notify_sys(struct notifier_block *this, unsigned long code, } static const struct file_operations txx9wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = txx9wdt_write, - .ioctl = txx9wdt_ioctl, - .open = txx9wdt_open, - .release = txx9wdt_release, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = txx9wdt_write, + .unlocked_ioctl = txx9wdt_ioctl, + .open = txx9wdt_open, + .release = txx9wdt_release, }; static struct miscdevice txx9wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &txx9wdt_fops, + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &txx9wdt_fops, }; static struct notifier_block txx9wdt_notifier = { -- cgit v1.2.3 From 46a3949ddc422882cc27c88d078838cd31885d78 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:18 +0100 Subject: [WATCHDOG 49/57] w83627hf: coding style, clean up and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/w83627hf_wdt.c | 175 +++++++++++++++++++--------------------- 1 file changed, 83 insertions(+), 92 deletions(-) diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c index 386492821fc2..70c843f4201a 100644 --- a/drivers/watchdog/w83627hf_wdt.c +++ b/drivers/watchdog/w83627hf_wdt.c @@ -37,9 +37,9 @@ #include #include #include +#include +#include -#include -#include #include #define WATCHDOG_NAME "w83627hf/thf/hg WDT" @@ -57,22 +57,26 @@ MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)"); static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1 <= timeout <= 255, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) "."); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Kernel methods. */ #define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */ -#define WDT_EFIR (wdt_io+0) /* Extended Function Index Register (same as EFER) */ +#define WDT_EFIR (wdt_io+0) /* Extended Function Index Register + (same as EFER) */ #define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */ -static void -w83627hf_select_wd_register(void) +static void w83627hf_select_wd_register(void) { unsigned char c; outb_p(0x87, WDT_EFER); /* Enter extended function mode */ @@ -93,43 +97,45 @@ w83627hf_select_wd_register(void) outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */ } -static void -w83627hf_unselect_wd_register(void) +static void w83627hf_unselect_wd_register(void) { outb_p(0xAA, WDT_EFER); /* Leave extended function mode */ } /* tyan motherboards seem to set F5 to 0x4C ? * So explicitly init to appropriate value. */ -static void -w83627hf_init(void) + +static void w83627hf_init(void) { unsigned char t; w83627hf_select_wd_register(); outb_p(0xF6, WDT_EFER); /* Select CRF6 */ - t=inb_p(WDT_EFDR); /* read CRF6 */ + t = inb_p(WDT_EFDR); /* read CRF6 */ if (t != 0) { - printk (KERN_INFO PFX "Watchdog already running. Resetting timeout to %d sec\n", timeout); + printk(KERN_INFO PFX + "Watchdog already running. Resetting timeout to %d sec\n", + timeout); outb_p(timeout, WDT_EFDR); /* Write back to CRF6 */ } outb_p(0xF5, WDT_EFER); /* Select CRF5 */ - t=inb_p(WDT_EFDR); /* read CRF5 */ - t&=~0x0C; /* set second mode & disable keyboard turning off watchdog */ + t = inb_p(WDT_EFDR); /* read CRF5 */ + t &= ~0x0C; /* set second mode & disable keyboard + turning off watchdog */ outb_p(t, WDT_EFDR); /* Write back to CRF5 */ outb_p(0xF7, WDT_EFER); /* Select CRF7 */ - t=inb_p(WDT_EFDR); /* read CRF7 */ - t&=~0xC0; /* disable keyboard & mouse turning off watchdog */ + t = inb_p(WDT_EFDR); /* read CRF7 */ + t &= ~0xC0; /* disable keyboard & mouse turning off + watchdog */ outb_p(t, WDT_EFDR); /* Write back to CRF7 */ w83627hf_unselect_wd_register(); } -static void -wdt_ctrl(int timeout) +static void wdt_ctrl(int timeout) { spin_lock(&io_lock); @@ -143,32 +149,28 @@ wdt_ctrl(int timeout) spin_unlock(&io_lock); } -static int -wdt_ping(void) +static int wdt_ping(void) { wdt_ctrl(timeout); return 0; } -static int -wdt_disable(void) +static int wdt_disable(void) { wdt_ctrl(0); return 0; } -static int -wdt_set_heartbeat(int t) +static int wdt_set_heartbeat(int t) { - if ((t < 1) || (t > 255)) + if (t < 1 || t > 255) return -EINVAL; - timeout = t; return 0; } -static ssize_t -wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { if (count) { if (!nowayout) { @@ -189,72 +191,61 @@ wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) return count; } -static int -wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; int new_timeout; static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "W83627HF WDT", }; switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof(ident))) - return -EFAULT; - break; - + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - + return put_user(0, p); case WDIOC_KEEPALIVE: - wdt_ping(); - break; - + wdt_ping(); + break; case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - if (wdt_set_heartbeat(new_timeout)) - return -EINVAL; - wdt_ping(); - /* Fall */ - + if (get_user(new_timeout, p)) + return -EFAULT; + if (wdt_set_heartbeat(new_timeout)) + return -EINVAL; + wdt_ping(); + /* Fall */ case WDIOC_GETTIMEOUT: - return put_user(timeout, p); - + return put_user(timeout, p); case WDIOC_SETOPTIONS: { - int options, retval = -EINVAL; - - if (get_user(options, p)) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) { - wdt_disable(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) { - wdt_ping(); - retval = 0; - } + int options, retval = -EINVAL; - return retval; + if (get_user(options, p)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + wdt_disable(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + wdt_ping(); + retval = 0; + } + return retval; } - default: - return -ENOTTY; + return -ENOTTY; } return 0; } -static int -wdt_open(struct inode *inode, struct file *file) +static int wdt_open(struct inode *inode, struct file *file) { if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; @@ -266,13 +257,13 @@ wdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static int -wdt_close(struct inode *inode, struct file *file) +static int wdt_close(struct inode *inode, struct file *file) { - if (expect_close == 42) { + if (expect_close == 42) wdt_disable(); - } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + else { + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); wdt_ping(); } expect_close = 0; @@ -284,8 +275,7 @@ wdt_close(struct inode *inode, struct file *file) * Notifier for system down */ -static int -wdt_notify_sys(struct notifier_block *this, unsigned long code, +static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { if (code == SYS_DOWN || code == SYS_HALT) { @@ -303,7 +293,7 @@ static const struct file_operations wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdt_write, - .ioctl = wdt_ioctl, + .unlocked_ioctl = wdt_ioctl, .open = wdt_open, .release = wdt_close, }; @@ -323,8 +313,7 @@ static struct notifier_block wdt_notifier = { .notifier_call = wdt_notify_sys, }; -static int __init -wdt_init(void) +static int __init wdt_init(void) { int ret; @@ -332,12 +321,13 @@ wdt_init(void) if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); - printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n", - WATCHDOG_TIMEOUT); + printk(KERN_INFO PFX + "timeout value must be 1 <= timeout <= 255, using %d\n", + WATCHDOG_TIMEOUT); } if (!request_region(wdt_io, 1, WATCHDOG_NAME)) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", + printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", wdt_io); ret = -EIO; goto out; @@ -347,20 +337,22 @@ wdt_init(void) ret = register_reboot_notifier(&wdt_notifier); if (ret != 0) { - printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - ret); + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", ret); goto unreg_regions; } ret = misc_register(&wdt_miscdev); if (ret != 0) { - printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_reboot; } - printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", - timeout, nowayout); + printk(KERN_INFO PFX + "initialized. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); out: return ret; @@ -371,12 +363,11 @@ unreg_regions: goto out; } -static void __exit -wdt_exit(void) +static void __exit wdt_exit(void) { misc_deregister(&wdt_miscdev); unregister_reboot_notifier(&wdt_notifier); - release_region(wdt_io,1); + release_region(wdt_io, 1); } module_init(wdt_init); -- cgit v1.2.3 From c1c8dd39f53e56d6a92aa6a2db9940d912d7ee4c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:23 +0100 Subject: [WATCHDOG 50/57] w83697hf_wdt: cleanup, coding style and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/w83697hf_wdt.c | 148 ++++++++++++++++++++-------------------- 1 file changed, 73 insertions(+), 75 deletions(-) diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index 528b882420b6..06ddd38675bd 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -36,9 +36,9 @@ #include #include #include +#include +#include -#include -#include #include #define WATCHDOG_NAME "w83697hf/hg WDT" @@ -53,37 +53,43 @@ static DEFINE_SPINLOCK(io_lock); /* You must set this - there is no sane way to probe for this board. */ static int wdt_io = 0x2e; module_param(wdt_io, int, 0); -MODULE_PARM_DESC(wdt_io, "w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)"); +MODULE_PARM_DESC(wdt_io, + "w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)"); static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255 (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1<= timeout <=255 (default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static int early_disable = WATCHDOG_EARLY_DISABLE; module_param(early_disable, int, 0); -MODULE_PARM_DESC(early_disable, "Watchdog gets disabled at boot time (default=" __MODULE_STRING(WATCHDOG_EARLY_DISABLE) ")"); +MODULE_PARM_DESC(early_disable, + "Watchdog gets disabled at boot time (default=" + __MODULE_STRING(WATCHDOG_EARLY_DISABLE) ")"); /* * Kernel methods. */ -#define W83697HF_EFER (wdt_io+0) /* Extended Function Enable Register */ -#define W83697HF_EFIR (wdt_io+0) /* Extended Function Index Register (same as EFER) */ -#define W83697HF_EFDR (wdt_io+1) /* Extended Function Data Register */ +#define W83697HF_EFER (wdt_io + 0) /* Extended Function Enable Register */ +#define W83697HF_EFIR (wdt_io + 0) /* Extended Function Index Register + (same as EFER) */ +#define W83697HF_EFDR (wdt_io + 1) /* Extended Function Data Register */ -static inline void -w83697hf_unlock(void) +static inline void w83697hf_unlock(void) { outb_p(0x87, W83697HF_EFER); /* Enter extended function mode */ outb_p(0x87, W83697HF_EFER); /* Again according to manual */ } -static inline void -w83697hf_lock(void) +static inline void w83697hf_lock(void) { outb_p(0xAA, W83697HF_EFER); /* Leave extended function mode */ } @@ -93,41 +99,36 @@ w83697hf_lock(void) * w83697hf_write_timeout() must be called with the device unlocked. */ -static unsigned char -w83697hf_get_reg(unsigned char reg) +static unsigned char w83697hf_get_reg(unsigned char reg) { outb_p(reg, W83697HF_EFIR); return inb_p(W83697HF_EFDR); } -static void -w83697hf_set_reg(unsigned char reg, unsigned char data) +static void w83697hf_set_reg(unsigned char reg, unsigned char data) { outb_p(reg, W83697HF_EFIR); outb_p(data, W83697HF_EFDR); } -static void -w83697hf_write_timeout(int timeout) +static void w83697hf_write_timeout(int timeout) { - w83697hf_set_reg(0xF4, timeout); /* Write Timeout counter to CRF4 */ + /* Write Timeout counter to CRF4 */ + w83697hf_set_reg(0xF4, timeout); } -static void -w83697hf_select_wdt(void) +static void w83697hf_select_wdt(void) { w83697hf_unlock(); w83697hf_set_reg(0x07, 0x08); /* Switch to logic device 8 (GPIO2) */ } -static inline void -w83697hf_deselect_wdt(void) +static inline void w83697hf_deselect_wdt(void) { w83697hf_lock(); } -static void -w83697hf_init(void) +static void w83697hf_init(void) { unsigned char bbuf; @@ -136,7 +137,9 @@ w83697hf_init(void) bbuf = w83697hf_get_reg(0x29); bbuf &= ~0x60; bbuf |= 0x20; - w83697hf_set_reg(0x29, bbuf); /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ + + /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ + w83697hf_set_reg(0x29, bbuf); bbuf = w83697hf_get_reg(0xF3); bbuf &= ~0x04; @@ -145,8 +148,7 @@ w83697hf_init(void) w83697hf_deselect_wdt(); } -static void -wdt_ping(void) +static void wdt_ping(void) { spin_lock(&io_lock); w83697hf_select_wdt(); @@ -157,8 +159,7 @@ wdt_ping(void) spin_unlock(&io_lock); } -static void -wdt_enable(void) +static void wdt_enable(void) { spin_lock(&io_lock); w83697hf_select_wdt(); @@ -170,8 +171,7 @@ wdt_enable(void) spin_unlock(&io_lock); } -static void -wdt_disable(void) +static void wdt_disable(void) { spin_lock(&io_lock); w83697hf_select_wdt(); @@ -183,8 +183,7 @@ wdt_disable(void) spin_unlock(&io_lock); } -static unsigned char -wdt_running(void) +static unsigned char wdt_running(void) { unsigned char t; @@ -199,18 +198,17 @@ wdt_running(void) return t; } -static int -wdt_set_heartbeat(int t) +static int wdt_set_heartbeat(int t) { - if ((t < 1) || (t > 255)) + if (t < 1 || t > 255) return -EINVAL; timeout = t; return 0; } -static ssize_t -wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { if (count) { if (!nowayout) { @@ -231,15 +229,14 @@ wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) return count; } -static int -wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; int new_timeout; - static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "W83697HF WDT", }; @@ -295,8 +292,7 @@ wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, return 0; } -static int -wdt_open(struct inode *inode, struct file *file) +static int wdt_open(struct inode *inode, struct file *file) { if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; @@ -308,13 +304,13 @@ wdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static int -wdt_close(struct inode *inode, struct file *file) +static int wdt_close(struct inode *inode, struct file *file) { - if (expect_close == 42) { + if (expect_close == 42) wdt_disable(); - } else { - printk (KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + else { + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); wdt_ping(); } expect_close = 0; @@ -326,8 +322,7 @@ wdt_close(struct inode *inode, struct file *file) * Notifier for system down */ -static int -wdt_notify_sys(struct notifier_block *this, unsigned long code, +static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { if (code == SYS_DOWN || code == SYS_HALT) { @@ -345,7 +340,7 @@ static const struct file_operations wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdt_write, - .ioctl = wdt_ioctl, + .unlocked_ioctl = wdt_ioctl, .open = wdt_open, .release = wdt_close, }; @@ -365,36 +360,38 @@ static struct notifier_block wdt_notifier = { .notifier_call = wdt_notify_sys, }; -static int -w83697hf_check_wdt(void) +static int w83697hf_check_wdt(void) { if (!request_region(wdt_io, 2, WATCHDOG_NAME)) { - printk (KERN_ERR PFX "I/O address 0x%x already in use\n", wdt_io); + printk(KERN_ERR PFX + "I/O address 0x%x already in use\n", wdt_io); return -EIO; } - printk (KERN_DEBUG PFX "Looking for watchdog at address 0x%x\n", wdt_io); + printk(KERN_DEBUG PFX + "Looking for watchdog at address 0x%x\n", wdt_io); w83697hf_unlock(); if (w83697hf_get_reg(0x20) == 0x60) { - printk (KERN_INFO PFX "watchdog found at address 0x%x\n", wdt_io); + printk(KERN_INFO PFX + "watchdog found at address 0x%x\n", wdt_io); w83697hf_lock(); return 0; } - w83697hf_lock(); /* Reprotect in case it was a compatible device */ + /* Reprotect in case it was a compatible device */ + w83697hf_lock(); - printk (KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io); + printk(KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io); release_region(wdt_io, 2); return -EIO; } static int w83697hf_ioports[] = { 0x2e, 0x4e, 0x00 }; -static int __init -wdt_init(void) +static int __init wdt_init(void) { int ret, i, found = 0; - printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n"); + printk(KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n"); if (wdt_io == 0) { /* we will autodetect the W83697HF/HG watchdog */ @@ -409,7 +406,7 @@ wdt_init(void) } if (!found) { - printk (KERN_ERR PFX "No W83697HF/HG could be found\n"); + printk(KERN_ERR PFX "No W83697HF/HG could be found\n"); ret = -EIO; goto out; } @@ -423,25 +420,27 @@ wdt_init(void) if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); - printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n", - WATCHDOG_TIMEOUT); + printk(KERN_INFO PFX + "timeout value must be 1 <= timeout <= 255, using %d\n", + WATCHDOG_TIMEOUT); } ret = register_reboot_notifier(&wdt_notifier); if (ret != 0) { - printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - ret); + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", ret); goto unreg_regions; } ret = misc_register(&wdt_miscdev); if (ret != 0) { - printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_reboot; } - printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", + printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); out: @@ -453,8 +452,7 @@ unreg_regions: goto out; } -static void __exit -wdt_exit(void) +static void __exit wdt_exit(void) { misc_deregister(&wdt_miscdev); unregister_reboot_notifier(&wdt_notifier); -- cgit v1.2.3 From c1cfd1a2ffc5ee58f744b1ceb0887285df187668 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:29 +0100 Subject: [WATCHDOG 51/57] w83877f_wdt: clean up code, coding style, switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/w83877f_wdt.c | 199 +++++++++++++++++++++-------------------- 1 file changed, 101 insertions(+), 98 deletions(-) diff --git a/drivers/watchdog/w83877f_wdt.c b/drivers/watchdog/w83877f_wdt.c index f510a3a595e6..75b546d7d8c2 100644 --- a/drivers/watchdog/w83877f_wdt.c +++ b/drivers/watchdog/w83877f_wdt.c @@ -23,13 +23,16 @@ * Added KERN_* tags to printks * add CONFIG_WATCHDOG_NOWAYOUT support * fix possible wdt_is_open race - * changed watchdog_info to correctly reflect what the driver offers - * added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS, WDIOC_SETTIMEOUT, + * changed watchdog_info to correctly reflect what + * the driver offers + * added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS, + * WDIOC_SETTIMEOUT, * WDIOC_GETTIMEOUT, and WDIOC_SETOPTIONS ioctls * 09/8 - 2003 [wim@iguana.be] cleanup of trailing spaces * added extra printk's for startup problems * use module_param - * made timeout (the emulated heartbeat) a module_param + * made timeout (the emulated heartbeat) a + * module_param * made the keepalive ping an internal subroutine * * This WDT driver is different from most other Linux WDT @@ -51,8 +54,8 @@ #include #include #include -#include -#include +#include +#include #include #define OUR_NAME "w83877f_wdt" @@ -80,14 +83,19 @@ */ #define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ -static int timeout = WATCHDOG_TIMEOUT; /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +static int timeout = WATCHDOG_TIMEOUT; module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1<=timeout<=3600, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static void wdt_timer_ping(unsigned long); static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0); @@ -105,8 +113,7 @@ static void wdt_timer_ping(unsigned long data) /* If we got a heartbeat pulse within the WDT_US_INTERVAL * we agree to ping the WDT */ - if(time_before(jiffies, next_heartbeat)) - { + if (time_before(jiffies, next_heartbeat)) { /* Ping the WDT */ spin_lock(&wdt_spinlock); @@ -118,9 +125,9 @@ static void wdt_timer_ping(unsigned long data) spin_unlock(&wdt_spinlock); - } else { - printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); - } + } else + printk(KERN_WARNING PFX + "Heartbeat lost! Will not ping the watchdog\n"); } /* @@ -181,22 +188,21 @@ static void wdt_keepalive(void) * /dev/watchdog handling */ -static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos) +static ssize_t fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ - if(count) - { - if (!nowayout) - { + if (count) { + if (!nowayout) { size_t ofs; - /* note: just in case someone wrote the magic character - * five months ago... */ + /* note: just in case someone wrote the magic + character five months ago... */ wdt_expect_close = 0; - /* scan to see whether or not we got the magic character */ - for(ofs = 0; ofs != count; ofs++) - { + /* scan to see whether or not we got the + magic character */ + for (ofs = 0; ofs != count; ofs++) { char c; if (get_user(c, buf + ofs)) return -EFAULT; @@ -211,10 +217,10 @@ static ssize_t fop_write(struct file * file, const char __user * buf, size_t cou return count; } -static int fop_open(struct inode * inode, struct file * file) +static int fop_open(struct inode *inode, struct file *file) { /* Just in case we're already talking to someone... */ - if(test_and_set_bit(0, &wdt_is_open)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; /* Good, fire up the show */ @@ -222,78 +228,78 @@ static int fop_open(struct inode * inode, struct file * file) return nonseekable_open(inode, file); } -static int fop_close(struct inode * inode, struct file * file) +static int fop_close(struct inode *inode, struct file *file) { - if(wdt_expect_close == 42) + if (wdt_expect_close == 42) wdt_turnoff(); else { del_timer(&timer); - printk(KERN_CRIT PFX "device file closed unexpectedly. Will not stop the WDT!\n"); + printk(KERN_CRIT PFX + "device file closed unexpectedly. Will not stop the WDT!\n"); } clear_bit(0, &wdt_is_open); wdt_expect_close = 0; return 0; } -static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident= - { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "W83877F", }; - switch(cmd) + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETOPTIONS: { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; - case WDIOC_SETOPTIONS: - { - int new_options, retval = -EINVAL; - - if(get_user(new_options, p)) - return -EFAULT; - - if(new_options & WDIOS_DISABLECARD) { - wdt_turnoff(); - retval = 0; - } + int new_options, retval = -EINVAL; - if(new_options & WDIOS_ENABLECARD) { - wdt_startup(); - retval = 0; - } + if (get_user(new_options, p)) + return -EFAULT; - return retval; + if (new_options & WDIOS_DISABLECARD) { + wdt_turnoff(); + retval = 0; } - case WDIOC_SETTIMEOUT: - { - int new_timeout; - if(get_user(new_timeout, p)) - return -EFAULT; + if (new_options & WDIOS_ENABLECARD) { + wdt_startup(); + retval = 0; + } - if(new_timeout < 1 || new_timeout > 3600) /* arbitrary upper limit */ - return -EINVAL; + return retval; + } + case WDIOC_SETTIMEOUT: + { + int new_timeout; - timeout = new_timeout; - wdt_keepalive(); - /* Fall through */ - } - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); + if (get_user(new_timeout, p)) + return -EFAULT; + + /* arbitrary upper limit */ + if (new_timeout < 1 || new_timeout > 3600) + return -EINVAL; + + timeout = new_timeout; + wdt_keepalive(); + /* Fall through */ + } + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); } } @@ -303,7 +309,7 @@ static const struct file_operations wdt_fops = { .write = fop_write, .open = fop_open, .release = fop_close, - .ioctl = fop_ioctl, + .unlocked_ioctl = fop_ioctl, }; static struct miscdevice wdt_miscdev = { @@ -319,7 +325,7 @@ static struct miscdevice wdt_miscdev = { static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if(code==SYS_DOWN || code==SYS_HALT) + if (code == SYS_DOWN || code == SYS_HALT) wdt_turnoff(); return NOTIFY_DONE; } @@ -329,8 +335,7 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code, * turn the timebomb registers off. */ -static struct notifier_block wdt_notifier= -{ +static struct notifier_block wdt_notifier = { .notifier_call = wdt_notify_sys, }; @@ -342,31 +347,29 @@ static void __exit w83877f_wdt_unload(void) misc_deregister(&wdt_miscdev); unregister_reboot_notifier(&wdt_notifier); - release_region(WDT_PING,1); - release_region(ENABLE_W83877F_PORT,2); + release_region(WDT_PING, 1); + release_region(ENABLE_W83877F_PORT, 2); } static int __init w83877f_wdt_init(void) { int rc = -EBUSY; - if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */ - { + if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */ timeout = WATCHDOG_TIMEOUT; - printk(KERN_INFO PFX "timeout value must be 1<=x<=3600, using %d\n", - timeout); + printk(KERN_INFO PFX + "timeout value must be 1 <= x <= 3600, using %d\n", + timeout); } - if (!request_region(ENABLE_W83877F_PORT, 2, "W83877F WDT")) - { + if (!request_region(ENABLE_W83877F_PORT, 2, "W83877F WDT")) { printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", ENABLE_W83877F_PORT); rc = -EIO; goto err_out; } - if (!request_region(WDT_PING, 1, "W8387FF WDT")) - { + if (!request_region(WDT_PING, 1, "W8387FF WDT")) { printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", WDT_PING); rc = -EIO; @@ -374,22 +377,22 @@ static int __init w83877f_wdt_init(void) } rc = register_reboot_notifier(&wdt_notifier); - if (rc) - { - printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - rc); + if (rc) { + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", rc); goto err_out_region2; } rc = misc_register(&wdt_miscdev); - if (rc) - { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - wdt_miscdev.minor, rc); + if (rc) { + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); goto err_out_reboot; } - printk(KERN_INFO PFX "WDT driver for W83877F initialised. timeout=%d sec (nowayout=%d)\n", + printk(KERN_INFO PFX + "WDT driver for W83877F initialised. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); return 0; @@ -397,9 +400,9 @@ static int __init w83877f_wdt_init(void) err_out_reboot: unregister_reboot_notifier(&wdt_notifier); err_out_region2: - release_region(WDT_PING,1); + release_region(WDT_PING, 1); err_out_region1: - release_region(ENABLE_W83877F_PORT,2); + release_region(ENABLE_W83877F_PORT, 2); err_out: return rc; } -- cgit v1.2.3 From 84af401af831567967250dec9c15680bceede5e4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:34 +0100 Subject: [WATCHDOG 52/57] w83977f_wdt: clean up, coding style and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/w83977f_wdt.c | 225 ++++++++++++++++++++--------------------- 1 file changed, 111 insertions(+), 114 deletions(-) diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c index b209bcd7f789..6860a13f5bb9 100644 --- a/drivers/watchdog/w83977f_wdt.c +++ b/drivers/watchdog/w83977f_wdt.c @@ -26,10 +26,10 @@ #include #include #include +#include +#include -#include #include -#include #define WATCHDOG_VERSION "1.00" #define WATCHDOG_NAME "W83977F WDT" @@ -53,13 +53,17 @@ static char expect_close; static DEFINE_SPINLOCK(spinlock); module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (15..7635), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds (15..7635), default=" + __MODULE_STRING(DEFAULT_TIMEOUT) ")"); module_param(testmode, int, 0); -MODULE_PARM_DESC(testmode,"Watchdog testmode (1 = no reboot), default=0"); +MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Start the watchdog @@ -72,8 +76,8 @@ static int wdt_start(void) spin_lock_irqsave(&spinlock, flags); /* Unlock the SuperIO chip */ - outb_p(UNLOCK_DATA,IO_INDEX_PORT); - outb_p(UNLOCK_DATA,IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); /* * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4. @@ -81,50 +85,49 @@ static int wdt_start(void) * F3 is set to enable watchdog LED blink at timeout. * F4 is used to just clear the TIMEOUT'ed state (bit 0). */ - outb_p(DEVICE_REGISTER,IO_INDEX_PORT); - outb_p(0x08,IO_DATA_PORT); - outb_p(0xF2,IO_INDEX_PORT); - outb_p(timeoutW,IO_DATA_PORT); - outb_p(0xF3,IO_INDEX_PORT); - outb_p(0x08,IO_DATA_PORT); - outb_p(0xF4,IO_INDEX_PORT); - outb_p(0x00,IO_DATA_PORT); + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(timeoutW, IO_DATA_PORT); + outb_p(0xF3, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF4, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); /* Set device Aux2 active */ - outb_p(0x30,IO_INDEX_PORT); - outb_p(0x01,IO_DATA_PORT); + outb_p(0x30, IO_INDEX_PORT); + outb_p(0x01, IO_DATA_PORT); - /* + /* * Select device Aux1 (dev=7) to set GP16 as the watchdog output * (in reg E6) and GP13 as the watchdog LED output (in reg E3). * Map GP16 at pin 119. * In test mode watch the bit 0 on F4 to indicate "triggered" or * check watchdog LED on SBC. */ - outb_p(DEVICE_REGISTER,IO_INDEX_PORT); - outb_p(0x07,IO_DATA_PORT); - if (!testmode) - { + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x07, IO_DATA_PORT); + if (!testmode) { unsigned pin_map; - outb_p(0xE6,IO_INDEX_PORT); - outb_p(0x0A,IO_DATA_PORT); - outb_p(0x2C,IO_INDEX_PORT); + outb_p(0xE6, IO_INDEX_PORT); + outb_p(0x0A, IO_DATA_PORT); + outb_p(0x2C, IO_INDEX_PORT); pin_map = inb_p(IO_DATA_PORT); pin_map |= 0x10; pin_map &= ~(0x20); - outb_p(0x2C,IO_INDEX_PORT); - outb_p(pin_map,IO_DATA_PORT); + outb_p(0x2C, IO_INDEX_PORT); + outb_p(pin_map, IO_DATA_PORT); } - outb_p(0xE3,IO_INDEX_PORT); - outb_p(0x08,IO_DATA_PORT); + outb_p(0xE3, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); /* Set device Aux1 active */ - outb_p(0x30,IO_INDEX_PORT); - outb_p(0x01,IO_DATA_PORT); + outb_p(0x30, IO_INDEX_PORT); + outb_p(0x01, IO_DATA_PORT); /* Lock the SuperIO chip */ - outb_p(LOCK_DATA,IO_INDEX_PORT); + outb_p(LOCK_DATA, IO_INDEX_PORT); spin_unlock_irqrestore(&spinlock, flags); @@ -144,42 +147,41 @@ static int wdt_stop(void) spin_lock_irqsave(&spinlock, flags); /* Unlock the SuperIO chip */ - outb_p(UNLOCK_DATA,IO_INDEX_PORT); - outb_p(UNLOCK_DATA,IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); - /* + /* * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4. * F2 is reset to its default value (watchdog timer disabled). * F3 is reset to its default state. * F4 clears the TIMEOUT'ed state (bit 0) - back to default. */ - outb_p(DEVICE_REGISTER,IO_INDEX_PORT); - outb_p(0x08,IO_DATA_PORT); - outb_p(0xF2,IO_INDEX_PORT); - outb_p(0xFF,IO_DATA_PORT); - outb_p(0xF3,IO_INDEX_PORT); - outb_p(0x00,IO_DATA_PORT); - outb_p(0xF4,IO_INDEX_PORT); - outb_p(0x00,IO_DATA_PORT); - outb_p(0xF2,IO_INDEX_PORT); - outb_p(0x00,IO_DATA_PORT); + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(0xFF, IO_DATA_PORT); + outb_p(0xF3, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); + outb_p(0xF4, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); /* - * Select device Aux1 (dev=7) to set GP16 (in reg E6) and + * Select device Aux1 (dev=7) to set GP16 (in reg E6) and * Gp13 (in reg E3) as inputs. */ - outb_p(DEVICE_REGISTER,IO_INDEX_PORT); - outb_p(0x07,IO_DATA_PORT); - if (!testmode) - { - outb_p(0xE6,IO_INDEX_PORT); - outb_p(0x01,IO_DATA_PORT); + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x07, IO_DATA_PORT); + if (!testmode) { + outb_p(0xE6, IO_INDEX_PORT); + outb_p(0x01, IO_DATA_PORT); } - outb_p(0xE3,IO_INDEX_PORT); - outb_p(0x01,IO_DATA_PORT); + outb_p(0xE3, IO_INDEX_PORT); + outb_p(0x01, IO_DATA_PORT); /* Lock the SuperIO chip */ - outb_p(LOCK_DATA,IO_INDEX_PORT); + outb_p(LOCK_DATA, IO_INDEX_PORT); spin_unlock_irqrestore(&spinlock, flags); @@ -200,17 +202,17 @@ static int wdt_keepalive(void) spin_lock_irqsave(&spinlock, flags); /* Unlock the SuperIO chip */ - outb_p(UNLOCK_DATA,IO_INDEX_PORT); - outb_p(UNLOCK_DATA,IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); /* Select device Aux2 (device=8) to kick watchdog reg F2 */ - outb_p(DEVICE_REGISTER,IO_INDEX_PORT); - outb_p(0x08,IO_DATA_PORT); - outb_p(0xF2,IO_INDEX_PORT); - outb_p(timeoutW,IO_DATA_PORT); + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(timeoutW, IO_DATA_PORT); /* Lock the SuperIO chip */ - outb_p(LOCK_DATA,IO_INDEX_PORT); + outb_p(LOCK_DATA, IO_INDEX_PORT); spin_unlock_irqrestore(&spinlock, flags); @@ -227,7 +229,7 @@ static int wdt_set_timeout(int t) /* * Convert seconds to watchdog counter time units, rounding up. - * On PCM-5335 watchdog units are 30 seconds/step with 15 sec startup + * On PCM-5335 watchdog units are 30 seconds/step with 15 sec startup * value. This information is supplied in the PCM-5335 manual and was * checked by me on a real board. This is a bit strange because W83977f * datasheet says counter unit is in minutes! @@ -241,7 +243,7 @@ static int wdt_set_timeout(int t) return -EINVAL; /* - * timeout is the timeout in seconds, + * timeout is the timeout in seconds, * timeoutW is the timeout in watchdog counter units. */ timeoutW = tmrval; @@ -261,17 +263,17 @@ static int wdt_get_status(int *status) spin_lock_irqsave(&spinlock, flags); /* Unlock the SuperIO chip */ - outb_p(UNLOCK_DATA,IO_INDEX_PORT); - outb_p(UNLOCK_DATA,IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); /* Select device Aux2 (device=8) to read watchdog reg F4 */ - outb_p(DEVICE_REGISTER,IO_INDEX_PORT); - outb_p(0x08,IO_DATA_PORT); - outb_p(0xF4,IO_INDEX_PORT); + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF4, IO_INDEX_PORT); new_status = inb_p(IO_DATA_PORT); /* Lock the SuperIO chip */ - outb_p(LOCK_DATA,IO_INDEX_PORT); + outb_p(LOCK_DATA, IO_INDEX_PORT); spin_unlock_irqrestore(&spinlock, flags); @@ -290,7 +292,7 @@ static int wdt_get_status(int *status) static int wdt_open(struct inode *inode, struct file *file) { /* If the watchdog is alive we don't need to start it again */ - if( test_and_set_bit(0, &timer_alive) ) + if (test_and_set_bit(0, &timer_alive)) return -EBUSY; if (nowayout) @@ -306,13 +308,13 @@ static int wdt_release(struct inode *inode, struct file *file) * Shut off the timer. * Lock it in if it's a module and we set nowayout */ - if (expect_close == 42) - { + if (expect_close == 42) { wdt_stop(); clear_bit(0, &timer_alive); } else { wdt_keepalive(); - printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n"); + printk(KERN_CRIT PFX + "unexpected close, not stopping watchdog!\n"); } expect_close = 0; return 0; @@ -333,24 +335,22 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ - if(count) - { - if (!nowayout) - { + if (count) { + if (!nowayout) { size_t ofs; - /* note: just in case someone wrote the magic character long ago */ + /* note: just in case someone wrote the + magic character long ago */ expect_close = 0; - /* scan to see whether or not we got the magic character */ - for(ofs = 0; ofs != count; ofs++) - { + /* scan to see whether or not we got the + magic character */ + for (ofs = 0; ofs != count; ofs++) { char c; if (get_user(c, buf + ofs)) return -EFAULT; - if (c == 'V') { + if (c == 'V') expect_close = 42; - } } } @@ -377,8 +377,7 @@ static struct watchdog_info ident = { .identity = WATCHDOG_NAME, }; -static int wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { int status; int new_options, retval = -EINVAL; @@ -390,13 +389,13 @@ static int wdt_ioctl(struct inode *inode, struct file *file, uarg.i = (int __user *)arg; - switch(cmd) - { + switch (cmd) { default: return -ENOTTY; case WDIOC_GETSUPPORT: - return copy_to_user(uarg.ident, &ident, sizeof(ident)) ? -EFAULT : 0; + return copy_to_user(uarg.ident, &ident, + sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: wdt_get_status(&status); @@ -410,7 +409,7 @@ static int wdt_ioctl(struct inode *inode, struct file *file, return 0; case WDIOC_SETOPTIONS: - if (get_user (new_options, uarg.i)) + if (get_user(new_options, uarg.i)) return -EFAULT; if (new_options & WDIOS_DISABLECARD) { @@ -444,23 +443,21 @@ static int wdt_ioctl(struct inode *inode, struct file *file, static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code==SYS_DOWN || code==SYS_HALT) + if (code == SYS_DOWN || code == SYS_HALT) wdt_stop(); return NOTIFY_DONE; } -static const struct file_operations wdt_fops= -{ +static const struct file_operations wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdt_write, - .ioctl = wdt_ioctl, + .unlocked_ioctl = wdt_ioctl, .open = wdt_open, .release = wdt_release, }; -static struct miscdevice wdt_miscdev= -{ +static struct miscdevice wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &wdt_fops, @@ -474,20 +471,20 @@ static int __init w83977f_wdt_init(void) { int rc; - printk(KERN_INFO PFX DRIVER_VERSION); + printk(KERN_INFO PFX DRIVER_VERSION); /* - * Check that the timeout value is within it's range ; + * Check that the timeout value is within it's range; * if not reset to the default */ if (wdt_set_timeout(timeout)) { wdt_set_timeout(DEFAULT_TIMEOUT); - printk(KERN_INFO PFX "timeout value must be 15<=timeout<=7635, using %d\n", - DEFAULT_TIMEOUT); + printk(KERN_INFO PFX + "timeout value must be 15 <= timeout <= 7635, using %d\n", + DEFAULT_TIMEOUT); } - if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME)) - { + if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME)) { printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", IO_INDEX_PORT); rc = -EIO; @@ -495,30 +492,30 @@ static int __init w83977f_wdt_init(void) } rc = register_reboot_notifier(&wdt_notifier); - if (rc) - { - printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - rc); + if (rc) { + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", rc); goto err_out_region; } rc = misc_register(&wdt_miscdev); - if (rc) - { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - wdt_miscdev.minor, rc); + if (rc) { + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); goto err_out_reboot; } - printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d testmode=%d)\n", - timeout, nowayout, testmode); + printk(KERN_INFO PFX + "initialized. timeout=%d sec (nowayout=%d testmode=%d)\n", + timeout, nowayout, testmode); return 0; err_out_reboot: unregister_reboot_notifier(&wdt_notifier); err_out_region: - release_region(IO_INDEX_PORT,2); + release_region(IO_INDEX_PORT, 2); err_out: return rc; } @@ -528,7 +525,7 @@ static void __exit w83977f_wdt_exit(void) wdt_stop(); misc_deregister(&wdt_miscdev); unregister_reboot_notifier(&wdt_notifier); - release_region(IO_INDEX_PORT,2); + release_region(IO_INDEX_PORT, 2); } module_init(w83977f_wdt_init); -- cgit v1.2.3 From 694b16b2bd23bbd13163762c29f1e7885fe0da41 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:40 +0100 Subject: [WATCHDOG 53/57] wafer5823wdt: Clean up, coding style, switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/wafer5823wdt.c | 80 +++++++++++++++++++++++------------------ 1 file changed, 46 insertions(+), 34 deletions(-) diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c index 9e368091f799..886cbbcf3eed 100644 --- a/drivers/watchdog/wafer5823wdt.c +++ b/drivers/watchdog/wafer5823wdt.c @@ -36,8 +36,8 @@ #include #include #include -#include -#include +#include +#include #define WATCHDOG_NAME "Wafer 5823 WDT" #define PFX WATCHDOG_NAME ": " @@ -61,11 +61,15 @@ static int wdt_start = 0x443; static int timeout = WD_TIMO; /* in seconds */ module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WD_TIMO) "."); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1 <= timeout <= 255, default=" + __MODULE_STRING(WD_TIMO) "."); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static void wafwdt_ping(void) { @@ -90,7 +94,8 @@ wafwdt_stop(void) inb_p(wdt_stop); } -static ssize_t wafwdt_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos) +static ssize_t wafwdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ if (count) { @@ -100,7 +105,8 @@ static ssize_t wafwdt_write(struct file *file, const char __user *buf, size_t co /* In case it was set long ago */ expect_close = 0; - /* scan to see whether or not we got the magic character */ + /* scan to see whether or not we got the magic + character */ for (i = 0; i != count; i++) { char c; if (get_user(c, buf + i)) @@ -109,27 +115,29 @@ static ssize_t wafwdt_write(struct file *file, const char __user *buf, size_t co expect_close = 42; } } - /* Well, anyhow someone wrote to us, we should return that favour */ + /* Well, anyhow someone wrote to us, we should + return that favour */ wafwdt_ping(); } return count; } -static int wafwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long wafwdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_timeout; void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "Wafer 5823 WDT", }; switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof (ident))) + if (copy_to_user(argp, &ident, sizeof(ident))) return -EFAULT; break; @@ -194,10 +202,11 @@ static int wafwdt_open(struct inode *inode, struct file *file) static int wafwdt_close(struct inode *inode, struct file *file) { - if (expect_close == 42) { + if (expect_close == 42) wafwdt_stop(); - } else { - printk(KERN_CRIT PFX "WDT device closed unexpectedly. WDT will not stop!\n"); + else { + printk(KERN_CRIT PFX + "WDT device closed unexpectedly. WDT will not stop!\n"); wafwdt_ping(); } clear_bit(0, &wafwdt_is_open); @@ -209,12 +218,11 @@ wafwdt_close(struct inode *inode, struct file *file) * Notifier for system down */ -static int wafwdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) +static int wafwdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) { - if (code == SYS_DOWN || code == SYS_HALT) { - /* Turn the WDT off */ + if (code == SYS_DOWN || code == SYS_HALT) wafwdt_stop(); - } return NOTIFY_DONE; } @@ -226,7 +234,7 @@ static const struct file_operations wafwdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wafwdt_write, - .ioctl = wafwdt_ioctl, + .unlocked_ioctl = wafwdt_ioctl, .open = wafwdt_open, .release = wafwdt_close, }; @@ -250,25 +258,28 @@ static int __init wafwdt_init(void) { int ret; - printk(KERN_INFO "WDT driver for Wafer 5823 single board computer initialising.\n"); + printk(KERN_INFO + "WDT driver for Wafer 5823 single board computer initialising.\n"); if (timeout < 1 || timeout > 255) { timeout = WD_TIMO; - printk (KERN_INFO PFX "timeout value must be 1<=x<=255, using %d\n", - timeout); + printk(KERN_INFO PFX + "timeout value must be 1 <= x <= 255, using %d\n", + timeout); } if (wdt_stop != wdt_start) { - if(!request_region(wdt_stop, 1, "Wafer 5823 WDT")) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_stop); + if (!request_region(wdt_stop, 1, "Wafer 5823 WDT")) { + printk(KERN_ERR PFX + "I/O address 0x%04x already in use\n", + wdt_stop); ret = -EIO; goto error; } } - if(!request_region(wdt_start, 1, "Wafer 5823 WDT")) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", + if (!request_region(wdt_start, 1, "Wafer 5823 WDT")) { + printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", wdt_start); ret = -EIO; goto error2; @@ -276,19 +287,20 @@ static int __init wafwdt_init(void) ret = register_reboot_notifier(&wafwdt_notifier); if (ret != 0) { - printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - ret); + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", ret); goto error3; } ret = misc_register(&wafwdt_miscdev); if (ret != 0) { - printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto error4; } - printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", + printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); return ret; @@ -307,7 +319,7 @@ static void __exit wafwdt_exit(void) { misc_deregister(&wafwdt_miscdev); unregister_reboot_notifier(&wafwdt_notifier); - if(wdt_stop != wdt_start) + if (wdt_stop != wdt_start) release_region(wdt_stop, 1); release_region(wdt_start, 1); } -- cgit v1.2.3 From dae67a2835149e6518a78c5cf37d6de715c214fc Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:45 +0100 Subject: [WATCHDOG 54/57] wdrtas: clean up, coding style, switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/wdrtas.c | 103 ++++++++++++++++++---------------------------- 1 file changed, 41 insertions(+), 62 deletions(-) diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c index 1d64e277567d..20fd6715f25f 100644 --- a/drivers/watchdog/wdrtas.c +++ b/drivers/watchdog/wdrtas.c @@ -35,9 +35,9 @@ #include #include #include +#include #include -#include #define WDRTAS_MAGIC_CHAR 42 #define WDRTAS_SUPPORTED_MASK (WDIOF_SETTIMEOUT | \ @@ -56,7 +56,7 @@ static int wdrtas_nowayout = 0; #endif static atomic_t wdrtas_miscdev_open = ATOMIC_INIT(0); -static char wdrtas_expect_close = 0; +static char wdrtas_expect_close; static int wdrtas_interval; @@ -86,8 +86,8 @@ static char wdrtas_logbuffer[WDRTAS_LOGBUFFER_LEN]; * RTAS function set-indicator (surveillance). The unit of interval is * seconds. */ -static int -wdrtas_set_interval(int interval) + +static int wdrtas_set_interval(int interval) { long result; static int print_msg = 10; @@ -97,7 +97,7 @@ wdrtas_set_interval(int interval) result = rtas_call(wdrtas_token_set_indicator, 3, 1, NULL, WDRTAS_SURVEILLANCE_IND, 0, interval); - if ( (result < 0) && (print_msg) ) { + if (result < 0 && print_msg) { printk(KERN_ERR "wdrtas: setting the watchdog to %i " "timeout failed: %li\n", interval, result); print_msg--; @@ -116,16 +116,14 @@ wdrtas_set_interval(int interval) * as reported by the RTAS function ibm,get-system-parameter. The unit * of the return value is seconds. */ -static int -wdrtas_get_interval(int fallback_value) +static int wdrtas_get_interval(int fallback_value) { long result; char value[4]; result = rtas_call(wdrtas_token_get_sp, 3, 1, NULL, WDRTAS_SP_SPI, (void *)__pa(&value), 4); - if ( (value[0] != 0) || (value[1] != 2) || (value[3] != 0) || - (result < 0) ) { + if (value[0] != 0 || value[1] != 2 || value[3] != 0 || result < 0) { printk(KERN_WARNING "wdrtas: could not get sp_spi watchdog " "timeout (%li). Continuing\n", result); return fallback_value; @@ -141,8 +139,7 @@ wdrtas_get_interval(int fallback_value) * wdrtas_timer_start starts the watchdog by calling the RTAS function * set-interval (surveillance) */ -static void -wdrtas_timer_start(void) +static void wdrtas_timer_start(void) { wdrtas_set_interval(wdrtas_interval); } @@ -153,8 +150,7 @@ wdrtas_timer_start(void) * wdrtas_timer_stop stops the watchdog timer by calling the RTAS function * set-interval (surveillance) */ -static void -wdrtas_timer_stop(void) +static void wdrtas_timer_stop(void) { wdrtas_set_interval(0); } @@ -165,8 +161,7 @@ wdrtas_timer_stop(void) * wdrtas_log_scanned_event prints a message to the log buffer dumping * the results of the last event-scan call */ -static void -wdrtas_log_scanned_event(void) +static void wdrtas_log_scanned_event(void) { int i; @@ -175,13 +170,13 @@ wdrtas_log_scanned_event(void) "%02x %02x %02x %02x %02x %02x %02x %02x " "%02x %02x %02x %02x %02x %02x %02x %02x\n", (i / 16) + 1, (WDRTAS_LOGBUFFER_LEN / 16), - wdrtas_logbuffer[i + 0], wdrtas_logbuffer[i + 1], - wdrtas_logbuffer[i + 2], wdrtas_logbuffer[i + 3], - wdrtas_logbuffer[i + 4], wdrtas_logbuffer[i + 5], - wdrtas_logbuffer[i + 6], wdrtas_logbuffer[i + 7], - wdrtas_logbuffer[i + 8], wdrtas_logbuffer[i + 9], - wdrtas_logbuffer[i + 10], wdrtas_logbuffer[i + 11], - wdrtas_logbuffer[i + 12], wdrtas_logbuffer[i + 13], + wdrtas_logbuffer[i + 0], wdrtas_logbuffer[i + 1], + wdrtas_logbuffer[i + 2], wdrtas_logbuffer[i + 3], + wdrtas_logbuffer[i + 4], wdrtas_logbuffer[i + 5], + wdrtas_logbuffer[i + 6], wdrtas_logbuffer[i + 7], + wdrtas_logbuffer[i + 8], wdrtas_logbuffer[i + 9], + wdrtas_logbuffer[i + 10], wdrtas_logbuffer[i + 11], + wdrtas_logbuffer[i + 12], wdrtas_logbuffer[i + 13], wdrtas_logbuffer[i + 14], wdrtas_logbuffer[i + 15]); } @@ -192,8 +187,7 @@ wdrtas_log_scanned_event(void) * RTAS function event-scan and repeats these calls as long as there are * events available. All events will be dumped. */ -static void -wdrtas_timer_keepalive(void) +static void wdrtas_timer_keepalive(void) { long result; @@ -218,8 +212,7 @@ wdrtas_timer_keepalive(void) * wdrtas_get_temperature returns the current temperature in Fahrenheit. It * uses the RTAS call get-sensor-state, token 3 to do so */ -static int -wdrtas_get_temperature(void) +static int wdrtas_get_temperature(void) { long result; int temperature = 0; @@ -243,8 +236,7 @@ wdrtas_get_temperature(void) * returns a bitmask of defines WDIOF_... as defined in * include/linux/watchdog.h */ -static int -wdrtas_get_status(void) +static int wdrtas_get_status(void) { return 0; /* TODO */ } @@ -255,8 +247,7 @@ wdrtas_get_status(void) * returns a bitmask of defines WDIOF_... as defined in * include/linux/watchdog.h, indicating why the watchdog rebooted the system */ -static int -wdrtas_get_boot_status(void) +static int wdrtas_get_boot_status(void) { return 0; /* TODO */ } @@ -276,8 +267,7 @@ wdrtas_get_boot_status(void) * character 'V'. This character allows the watchdog device to be closed * properly. */ -static ssize_t -wdrtas_write(struct file *file, const char __user *buf, +static ssize_t wdrtas_write(struct file *file, const char __user *buf, size_t len, loff_t *ppos) { int i; @@ -306,7 +296,6 @@ out: /** * wdrtas_ioctl - ioctl function for the watchdog device - * @inode: inode structure * @file: file structure * @cmd: command for ioctl * @arg: argument pointer @@ -315,9 +304,9 @@ out: * * wdrtas_ioctl implements the watchdog API ioctls */ -static int -wdrtas_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) + +static long wdrtas_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int __user *argp = (void __user *)arg; int i; @@ -357,9 +346,9 @@ wdrtas_ioctl(struct inode *inode, struct file *file, wdrtas_timer_keepalive(); wdrtas_timer_start(); } + /* not implemented. Done by H8 if (i & WDIOS_TEMPPANIC) { - /* not implemented. Done by H8 */ - } + } */ return 0; case WDIOC_KEEPALIVE: @@ -399,8 +388,7 @@ wdrtas_ioctl(struct inode *inode, struct file *file, * * function called when watchdog device is opened */ -static int -wdrtas_open(struct inode *inode, struct file *file) +static int wdrtas_open(struct inode *inode, struct file *file) { /* only open once */ if (atomic_inc_return(&wdrtas_miscdev_open) > 1) { @@ -423,8 +411,7 @@ wdrtas_open(struct inode *inode, struct file *file) * * close function. Always succeeds */ -static int -wdrtas_close(struct inode *inode, struct file *file) +static int wdrtas_close(struct inode *inode, struct file *file) { /* only stop watchdog, if this was announced using 'V' before */ if (wdrtas_expect_close == WDRTAS_MAGIC_CHAR) @@ -453,8 +440,7 @@ wdrtas_close(struct inode *inode, struct file *file) * wdrtas_temp_read gives the temperature to the users by copying this * value as one byte into the user space buffer. The unit is Fahrenheit... */ -static ssize_t -wdrtas_temp_read(struct file *file, char __user *buf, +static ssize_t wdrtas_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { int temperature = 0; @@ -478,8 +464,7 @@ wdrtas_temp_read(struct file *file, char __user *buf, * * function called when temperature device is opened */ -static int -wdrtas_temp_open(struct inode *inode, struct file *file) +static int wdrtas_temp_open(struct inode *inode, struct file *file) { return nonseekable_open(inode, file); } @@ -493,8 +478,7 @@ wdrtas_temp_open(struct inode *inode, struct file *file) * * close function. Always succeeds */ -static int -wdrtas_temp_close(struct inode *inode, struct file *file) +static int wdrtas_temp_close(struct inode *inode, struct file *file) { return 0; } @@ -509,10 +493,10 @@ wdrtas_temp_close(struct inode *inode, struct file *file) * * wdrtas_reboot stops the watchdog in case of a reboot */ -static int -wdrtas_reboot(struct notifier_block *this, unsigned long code, void *ptr) +static int wdrtas_reboot(struct notifier_block *this, + unsigned long code, void *ptr) { - if ( (code==SYS_DOWN) || (code==SYS_HALT) ) + if (code == SYS_DOWN || code == SYS_HALT) wdrtas_timer_stop(); return NOTIFY_DONE; @@ -524,7 +508,7 @@ static const struct file_operations wdrtas_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdrtas_write, - .ioctl = wdrtas_ioctl, + .unlocked_ioctl = wdrtas_ioctl, .open = wdrtas_open, .release = wdrtas_close, }; @@ -562,8 +546,7 @@ static struct notifier_block wdrtas_notifier = { * this watchdog driver. It tolerates, if "get-sensor-state" and * "ibm,get-system-parameter" are not available. */ -static int -wdrtas_get_tokens(void) +static int wdrtas_get_tokens(void) { wdrtas_token_get_sensor_state = rtas_token("get-sensor-state"); if (wdrtas_token_get_sensor_state == RTAS_UNKNOWN_SERVICE) { @@ -603,8 +586,7 @@ wdrtas_get_tokens(void) * wdrtas_register_devs unregisters the watchdog and temperature watchdog * misc devs */ -static void -wdrtas_unregister_devs(void) +static void wdrtas_unregister_devs(void) { misc_deregister(&wdrtas_miscdev); if (wdrtas_token_get_sensor_state != RTAS_UNKNOWN_SERVICE) @@ -619,8 +601,7 @@ wdrtas_unregister_devs(void) * wdrtas_register_devs registers the watchdog and temperature watchdog * misc devs */ -static int -wdrtas_register_devs(void) +static int wdrtas_register_devs(void) { int result; @@ -651,8 +632,7 @@ wdrtas_register_devs(void) * * registers the file handlers and the reboot notifier */ -static int __init -wdrtas_init(void) +static int __init wdrtas_init(void) { if (wdrtas_get_tokens()) return -ENODEV; @@ -680,8 +660,7 @@ wdrtas_init(void) * * unregisters the file handlers and the reboot notifier */ -static void __exit -wdrtas_exit(void) +static void __exit wdrtas_exit(void) { if (!wdrtas_nowayout) wdrtas_timer_stop(); -- cgit v1.2.3 From d0e58eed05f9baf77c4f75e794ae245f6dae240a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:51 +0100 Subject: [WATCHDOG 55/57] wdt285: switch to unlocked_ioctl and tidy up oddments of coding style Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/wdt285.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c index e4cf661dc890..fea398a4ca32 100644 --- a/drivers/watchdog/wdt285.c +++ b/drivers/watchdog/wdt285.c @@ -26,9 +26,9 @@ #include #include #include +#include +#include -#include -#include #include #include #include @@ -115,8 +115,8 @@ static int watchdog_release(struct inode *inode, struct file *file) return 0; } -static ssize_t -watchdog_write(struct file *file, const char *data, size_t len, loff_t *ppos) +static ssize_t watchdog_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { /* * Refresh the timer. @@ -127,19 +127,18 @@ watchdog_write(struct file *file, const char *data, size_t len, loff_t *ppos) return len; } -static struct watchdog_info ident = { +static const struct watchdog_info ident = { .options = WDIOF_SETTIMEOUT, .identity = "Footbridge Watchdog", }; -static int -watchdog_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long watchdog_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { unsigned int new_margin; int ret = -ENOTTY; - switch(cmd) { + switch (cmd) { case WDIOC_GETSUPPORT: ret = 0; if (copy_to_user((void *)arg, &ident, sizeof(ident))) @@ -148,7 +147,7 @@ watchdog_ioctl(struct inode *inode, struct file *file, unsigned int cmd, case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - ret = put_user(0,(int *)arg); + ret = put_user(0, (int *)arg); break; case WDIOC_KEEPALIVE: @@ -182,7 +181,7 @@ static const struct file_operations watchdog_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = watchdog_write, - .ioctl = watchdog_ioctl, + .unlocked_ioctl = watchdog_ioctl, .open = watchdog_open, .release = watchdog_release, }; @@ -204,11 +203,13 @@ static int __init footbridge_watchdog_init(void) if (retval < 0) return retval; - printk("Footbridge Watchdog Timer: 0.01, timer margin: %d sec\n", - soft_margin); + printk(KERN_INFO + "Footbridge Watchdog Timer: 0.01, timer margin: %d sec\n", + soft_margin); if (machine_is_cats()) - printk("Warning: Watchdog reset may not work on this machine.\n"); + printk(KERN_WARN + "Warning: Watchdog reset may not work on this machine.\n"); return 0; } @@ -223,7 +224,7 @@ MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); module_param(soft_margin, int, 0); -MODULE_PARM_DESC(soft_margin,"Watchdog timeout in seconds"); +MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds"); module_init(footbridge_watchdog_init); module_exit(footbridge_watchdog_exit); -- cgit v1.2.3 From f2b79c6ede54cf07355ac8d8f3044d682cd0c5ca Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:57 +0100 Subject: [WATCHDOG 56/57] wdt977: clean up, coding style and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/wdt977.c | 148 +++++++++++++++++++++++----------------------- 1 file changed, 74 insertions(+), 74 deletions(-) diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c index fb4b876c9fda..bdc28e522f03 100644 --- a/drivers/watchdog/wdt977.c +++ b/drivers/watchdog/wdt977.c @@ -19,7 +19,8 @@ * 07-Jul-2003 Daniele Bellucci: Audit return code of misc_register in * nwwatchdog_init. * 25-Oct-2005 Woody Suwalski: Convert addresses to #defs, add spinlocks - * remove limitiation to be used on Netwinders only + * remove limitiation to be used on + * Netwinders only */ #include @@ -33,11 +34,11 @@ #include #include #include +#include +#include -#include #include #include -#include #define WATCHDOG_VERSION "0.04" #define WATCHDOG_NAME "Wdt977" @@ -45,7 +46,7 @@ #define DRIVER_VERSION WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n" #define IO_INDEX_PORT 0x370 /* on some systems it can be 0x3F0 */ -#define IO_DATA_PORT (IO_INDEX_PORT+1) +#define IO_DATA_PORT (IO_INDEX_PORT + 1) #define UNLOCK_DATA 0x87 #define LOCK_DATA 0xAA @@ -62,13 +63,16 @@ static char expect_close; static DEFINE_SPINLOCK(spinlock); module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (60..15300), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (60..15300), default=" + __MODULE_STRING(DEFAULT_TIMEOUT) ")"); module_param(testmode, int, 0); -MODULE_PARM_DESC(testmode,"Watchdog testmode (1 = no reboot), default=0"); +MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Start the watchdog @@ -95,14 +99,16 @@ static int wdt977_start(void) outb_p(0xF2, IO_INDEX_PORT); outb_p(timeoutM, IO_DATA_PORT); outb_p(0xF3, IO_INDEX_PORT); - outb_p(0x00, IO_DATA_PORT); /* another setting is 0E for kbd/mouse/LED */ + outb_p(0x00, IO_DATA_PORT); /* another setting is 0E for + kbd/mouse/LED */ outb_p(0xF4, IO_INDEX_PORT); outb_p(0x00, IO_DATA_PORT); - /* at last select device Aux1 (dev=7) and set GP16 as a watchdog output */ - /* in test mode watch the bit 1 on F4 to indicate "triggered" */ - if (!testmode) - { + /* At last select device Aux1 (dev=7) and set GP16 as a + * watchdog output. In test mode watch the bit 1 on F4 to + * indicate "triggered" + */ + if (!testmode) { outb_p(DEVICE_REGISTER, IO_INDEX_PORT); outb_p(0x07, IO_DATA_PORT); outb_p(0xE6, IO_INDEX_PORT); @@ -147,7 +153,8 @@ static int wdt977_stop(void) outb_p(0xF2, IO_INDEX_PORT); outb_p(0x00, IO_DATA_PORT); - /* at last select device Aux1 (dev=7) and set GP16 as a watchdog output */ + /* at last select device Aux1 (dev=7) and set + GP16 as a watchdog output */ outb_p(DEVICE_REGISTER, IO_INDEX_PORT); outb_p(0x07, IO_DATA_PORT); outb_p(0xE6, IO_INDEX_PORT); @@ -202,16 +209,18 @@ static int wdt977_set_timeout(int t) tmrval = (t + 59) / 60; if (machine_is_netwinder()) { - /* we have a hw bug somewhere, so each 977 minute is actually only 30sec - * this limits the max timeout to half of device max of 255 minutes... + /* we have a hw bug somewhere, so each 977 minute is actually + * only 30sec. This limits the max timeout to half of device + * max of 255 minutes... */ tmrval += tmrval; } - if ((tmrval < 1) || (tmrval > 255)) + if (tmrval < 1 || tmrval > 255) return -EINVAL; - /* timeout is the timeout in seconds, timeoutM is the timeout in minutes) */ + /* timeout is the timeout in seconds, timeoutM is + the timeout in minutes) */ timeout = t; timeoutM = tmrval; return 0; @@ -243,7 +252,7 @@ static int wdt977_get_status(int *status) spin_unlock_irqrestore(&spinlock, flags); - *status=0; + *status = 0; if (new_status & 1) *status |= WDIOF_CARDRESET; @@ -258,7 +267,7 @@ static int wdt977_get_status(int *status) static int wdt977_open(struct inode *inode, struct file *file) { /* If the watchdog is alive we don't need to start it again */ - if( test_and_set_bit(0,&timer_alive) ) + if (test_and_set_bit(0, &timer_alive)) return -EBUSY; if (nowayout) @@ -274,13 +283,13 @@ static int wdt977_release(struct inode *inode, struct file *file) * Shut off the timer. * Lock it in if it's a module and we set nowayout */ - if (expect_close == 42) - { + if (expect_close == 42) { wdt977_stop(); - clear_bit(0,&timer_alive); + clear_bit(0, &timer_alive); } else { wdt977_keepalive(); - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); } expect_close = 0; return 0; @@ -301,17 +310,14 @@ static int wdt977_release(struct inode *inode, struct file *file) static ssize_t wdt977_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { - if (count) - { - if (!nowayout) - { + if (count) { + if (!nowayout) { size_t i; /* In case it was set long ago */ expect_close = 0; - for (i = 0; i != count; i++) - { + for (i = 0; i != count; i++) { char c; if (get_user(c, buf + i)) return -EFAULT; @@ -326,6 +332,14 @@ static ssize_t wdt977_write(struct file *file, const char __user *buf, return count; } +static const struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .firmware_version = 1, + .identity = WATCHDOG_NAME, +}; + /* * wdt977_ioctl: * @inode: inode of the device @@ -337,16 +351,8 @@ static ssize_t wdt977_write(struct file *file, const char __user *buf, * according to their available features. */ -static struct watchdog_info ident = { - .options = WDIOF_SETTIMEOUT | - WDIOF_MAGICCLOSE | - WDIOF_KEEPALIVEPING, - .firmware_version = 1, - .identity = WATCHDOG_NAME, -}; - -static int wdt977_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long wdt977_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int status; int new_options, retval = -EINVAL; @@ -358,8 +364,7 @@ static int wdt977_ioctl(struct inode *inode, struct file *file, uarg.i = (int __user *)arg; - switch(cmd) - { + switch (cmd) { default: return -ENOTTY; @@ -379,7 +384,7 @@ static int wdt977_ioctl(struct inode *inode, struct file *file, return 0; case WDIOC_SETOPTIONS: - if (get_user (new_options, uarg.i)) + if (get_user(new_options, uarg.i)) return -EFAULT; if (new_options & WDIOS_DISABLECARD) { @@ -413,23 +418,21 @@ static int wdt977_ioctl(struct inode *inode, struct file *file, static int wdt977_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if(code==SYS_DOWN || code==SYS_HALT) + if (code == SYS_DOWN || code == SYS_HALT) wdt977_stop(); return NOTIFY_DONE; } -static const struct file_operations wdt977_fops= -{ +static const struct file_operations wdt977_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdt977_write, - .ioctl = wdt977_ioctl, + .unlocked_ioctl = wdt977_ioctl, .open = wdt977_open, .release = wdt977_release, }; -static struct miscdevice wdt977_miscdev= -{ +static struct miscdevice wdt977_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &wdt977_fops, @@ -443,51 +446,48 @@ static int __init wd977_init(void) { int rc; - //if (!machine_is_netwinder()) - // return -ENODEV; - printk(KERN_INFO PFX DRIVER_VERSION); - /* Check that the timeout value is within it's range ; if not reset to the default */ - if (wdt977_set_timeout(timeout)) - { + /* Check that the timeout value is within its range; + if not reset to the default */ + if (wdt977_set_timeout(timeout)) { wdt977_set_timeout(DEFAULT_TIMEOUT); - printk(KERN_INFO PFX "timeout value must be 60 Date: Mon, 19 May 2008 14:10:02 +0100 Subject: [WATCHDOG 57/57] wdt501/pci: Clean up, coding style and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/wdt.c | 176 +++++++++++++------------- drivers/watchdog/wdt_pci.c | 300 ++++++++++++++++++++++++++------------------- 2 files changed, 265 insertions(+), 211 deletions(-) diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c index 756fb15fdce7..53a6b18bcb9a 100644 --- a/drivers/watchdog/wdt.c +++ b/drivers/watchdog/wdt.c @@ -24,9 +24,10 @@ * Matt Crocker). * Alan Cox : Added wdt= boot option * Alan Cox : Cleaned up copy/user stuff - * Tim Hockin : Added insmod parameters, comment cleanup - * Parameterized timeout - * Tigran Aivazian : Restructured wdt_init() to handle failures + * Tim Hockin : Added insmod parameters, comment + * cleanup, parameterized timeout + * Tigran Aivazian : Restructured wdt_init() to handle + * failures * Joel Becker : Added WDIOC_GET/SETTIMEOUT * Matt Domsch : Added nowayout module option */ @@ -42,9 +43,9 @@ #include #include #include +#include +#include -#include -#include #include #include "wd501p.h" @@ -60,15 +61,19 @@ static char expect_close; static int heartbeat = WD_TIMO; static int wd_heartbeat; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0 65535)) + if (t < 1 || t > 65535) return -EINVAL; heartbeat = t; @@ -200,7 +211,7 @@ static int wdt_get_status(int *status) new_status = inb_p(WDT_SR); spin_unlock_irqrestore(&wdt_lock, flags); - *status=0; + *status = 0; if (new_status & WDC_SR_ISOI0) *status |= WDIOF_EXTERN1; if (new_status & WDC_SR_ISII1) @@ -266,7 +277,7 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id) #ifdef CONFIG_WDT_501 if (!(status & WDC_SR_TGOOD)) - printk(KERN_CRIT "Overheat alarm.(%d)\n",inb_p(WDT_RT)); + printk(KERN_CRIT "Overheat alarm.(%d)\n", inb_p(WDT_RT)); if (!(status & WDC_SR_PSUOVER)) printk(KERN_CRIT "PSU over voltage.\n"); if (!(status & WDC_SR_PSUUNDR)) @@ -304,9 +315,10 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id) * write of data will do, as we we don't define content meaning. */ -static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { - if(count) { + if (count) { if (!nowayout) { size_t i; @@ -328,7 +340,6 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count /** * wdt_ioctl: - * @inode: inode of the device * @file: file handle to the device * @cmd: watchdog command * @arg: argument pointer @@ -338,8 +349,7 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count * querying capabilities and current status. */ -static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -362,32 +372,28 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, ident.options |= WDIOF_FANFAULT; #endif /* CONFIG_WDT_501 */ - switch(cmd) - { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - - case WDIOC_GETSTATUS: - wdt_get_status(&status); - return put_user(status, p); - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_ping(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_heartbeat, p)) - return -EFAULT; - - if (wdt_set_heartbeat(new_heartbeat)) - return -EINVAL; - - wdt_ping(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, p); + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + wdt_get_status(&status); + return put_user(status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdt_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, p)) + return -EFAULT; + if (wdt_set_heartbeat(new_heartbeat)) + return -EINVAL; + wdt_ping(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); } } @@ -405,7 +411,7 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, static int wdt_open(struct inode *inode, struct file *file) { - if(test_and_set_bit(0, &wdt_is_open)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; /* * Activate @@ -432,7 +438,8 @@ static int wdt_release(struct inode *inode, struct file *file) wdt_stop(); clear_bit(0, &wdt_is_open); } else { - printk(KERN_CRIT "wdt: WDT device closed unexpectedly. WDT will not stop!\n"); + printk(KERN_CRIT + "wdt: WDT device closed unexpectedly. WDT will not stop!\n"); wdt_ping(); } expect_close = 0; @@ -451,14 +458,15 @@ static int wdt_release(struct inode *inode, struct file *file) * farenheit. It was designed by an imperial measurement luddite. */ -static ssize_t wdt_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ptr) +static ssize_t wdt_temp_read(struct file *file, char __user *buf, + size_t count, loff_t *ptr) { int temperature; if (wdt_get_temperature(&temperature)) return -EFAULT; - if (copy_to_user (buf, &temperature, 1)) + if (copy_to_user(buf, &temperature, 1)) return -EFAULT; return 1; @@ -506,10 +514,8 @@ static int wdt_temp_release(struct inode *inode, struct file *file) static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if(code==SYS_DOWN || code==SYS_HALT) { - /* Turn the card off */ + if (code == SYS_DOWN || code == SYS_HALT) wdt_stop(); - } return NOTIFY_DONE; } @@ -522,7 +528,7 @@ static const struct file_operations wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdt_write, - .ioctl = wdt_ioctl, + .unlocked_ioctl = wdt_ioctl, .open = wdt_open, .release = wdt_release, }; @@ -576,7 +582,7 @@ static void __exit wdt_exit(void) #endif /* CONFIG_WDT_501 */ unregister_reboot_notifier(&wdt_notifier); free_irq(irq, NULL); - release_region(io,8); + release_region(io, 8); } /** @@ -591,44 +597,49 @@ static int __init wdt_init(void) { int ret; - /* Check that the heartbeat value is within it's range ; if not reset to the default */ + /* Check that the heartbeat value is within it's range; + if not reset to the default */ if (wdt_set_heartbeat(heartbeat)) { wdt_set_heartbeat(WD_TIMO); - printk(KERN_INFO "wdt: heartbeat value must be 0 #include #include +#include +#include -#include -#include #include #define WDT_IS_PCI @@ -73,7 +75,7 @@ /* We can only use 1 card due to the /dev/watchdog restriction */ static int dev_count; -static struct semaphore open_sem; +static unsigned long open_lock; static DEFINE_SPINLOCK(wdtpci_lock); static char expect_close; @@ -86,18 +88,23 @@ static int irq; static int heartbeat = WD_TIMO; static int wd_heartbeat; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0>8, WDT_COUNT0+ctr); + outb(val & 0xFF, WDT_COUNT0 + ctr); + udelay(8); + outb(val >> 8, WDT_COUNT0 + ctr); + udelay(8); } /** @@ -134,23 +144,35 @@ static int wdtpci_start(void) * "pet" the watchdog, as Access says. * This resets the clock outputs. */ - inb_p(WDT_DC); /* Disable watchdog */ - wdtpci_ctr_mode(2,0); /* Program CTR2 for Mode 0: Pulse on Terminal Count */ - outb_p(0, WDT_DC); /* Enable watchdog */ - - inb_p(WDT_DC); /* Disable watchdog */ - outb_p(0, WDT_CLOCK); /* 2.0833MHz clock */ - inb_p(WDT_BUZZER); /* disable */ - inb_p(WDT_OPTONOTRST); /* disable */ - inb_p(WDT_OPTORST); /* disable */ - inb_p(WDT_PROGOUT); /* disable */ - wdtpci_ctr_mode(0,3); /* Program CTR0 for Mode 3: Square Wave Generator */ - wdtpci_ctr_mode(1,2); /* Program CTR1 for Mode 2: Rate Generator */ - wdtpci_ctr_mode(2,1); /* Program CTR2 for Mode 1: Retriggerable One-Shot */ - wdtpci_ctr_load(0,20833); /* count at 100Hz */ - wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_mode(2, 0); /* Program CTR2 for Mode 0: + Pulse on Terminal Count */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + outb(0, WDT_CLOCK); /* 2.0833MHz clock */ + udelay(8); + inb(WDT_BUZZER); /* disable */ + udelay(8); + inb(WDT_OPTONOTRST); /* disable */ + udelay(8); + inb(WDT_OPTORST); /* disable */ + udelay(8); + inb(WDT_PROGOUT); /* disable */ + udelay(8); + wdtpci_ctr_mode(0, 3); /* Program CTR0 for Mode 3: + Square Wave Generator */ + wdtpci_ctr_mode(1, 2); /* Program CTR1 for Mode 2: + Rate Generator */ + wdtpci_ctr_mode(2, 1); /* Program CTR2 for Mode 1: + Retriggerable One-Shot */ + wdtpci_ctr_load(0, 20833); /* count at 100Hz */ + wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */ /* DO NOT LOAD CTR2 on PCI card! -- JPN */ - outb_p(0, WDT_DC); /* Enable watchdog */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); spin_unlock_irqrestore(&wdtpci_lock, flags); return 0; @@ -162,14 +184,15 @@ static int wdtpci_start(void) * Stop the watchdog driver. */ -static int wdtpci_stop (void) +static int wdtpci_stop(void) { unsigned long flags; /* Turn the card off */ spin_lock_irqsave(&wdtpci_lock, flags); - inb_p(WDT_DC); /* Disable watchdog */ - wdtpci_ctr_load(2,0); /* 0 length reset pulses now */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_load(2, 0); /* 0 length reset pulses now */ spin_unlock_irqrestore(&wdtpci_lock, flags); return 0; } @@ -177,20 +200,23 @@ static int wdtpci_stop (void) /** * wdtpci_ping: * - * Reload counter one with the watchdog heartbeat. We don't bother reloading - * the cascade counter. + * Reload counter one with the watchdog heartbeat. We don't bother + * reloading the cascade counter. */ static int wdtpci_ping(void) { unsigned long flags; - /* Write a watchdog value */ spin_lock_irqsave(&wdtpci_lock, flags); - inb_p(WDT_DC); /* Disable watchdog */ - wdtpci_ctr_mode(1,2); /* Re-Program CTR1 for Mode 2: Rate Generator */ - wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */ - outb_p(0, WDT_DC); /* Enable watchdog */ + /* Write a watchdog value */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_mode(1, 2); /* Re-Program CTR1 for Mode 2: + Rate Generator */ + wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); spin_unlock_irqrestore(&wdtpci_lock, flags); return 0; } @@ -199,14 +225,14 @@ static int wdtpci_ping(void) * wdtpci_set_heartbeat: * @t: the new heartbeat value that needs to be set. * - * Set a new heartbeat value for the watchdog device. If the heartbeat value is - * incorrect we keep the old value and return -EINVAL. If successfull we - * return 0. + * Set a new heartbeat value for the watchdog device. If the heartbeat + * value is incorrect we keep the old value and return -EINVAL. + * If successful we return 0. */ static int wdtpci_set_heartbeat(int t) { /* Arbitrary, can't find the card's limits */ - if ((t < 1) || (t > 65535)) + if (t < 1 || t > 65535) return -EINVAL; heartbeat = t; @@ -227,9 +253,14 @@ static int wdtpci_set_heartbeat(int t) static int wdtpci_get_status(int *status) { - unsigned char new_status=inb_p(WDT_SR); + unsigned char new_status; + unsigned long flags; + + spin_lock_irqsave(&wdtpci_lock, flags); + new_status = inb(WDT_SR); + spin_unlock_irqrestore(&wdtpci_lock, flags); - *status=0; + *status = 0; if (new_status & WDC_SR_ISOI0) *status |= WDIOF_EXTERN1; if (new_status & WDC_SR_ISII1) @@ -259,8 +290,12 @@ static int wdtpci_get_status(int *status) static int wdtpci_get_temperature(int *temperature) { - unsigned short c=inb_p(WDT_RT); - + unsigned short c; + unsigned long flags; + spin_lock_irqsave(&wdtpci_lock, flags); + c = inb(WDT_RT); + udelay(8); + spin_unlock_irqrestore(&wdtpci_lock, flags); *temperature = (c * 11 / 15) + 7; return 0; } @@ -282,17 +317,25 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) * Read the status register see what is up and * then printk it. */ - unsigned char status=inb_p(WDT_SR); + unsigned char status; + + spin_lock(&wdtpci_lock); + + status = inb(WDT_SR); + udelay(8); printk(KERN_CRIT PFX "status %d\n", status); #ifdef CONFIG_WDT_501_PCI - if (!(status & WDC_SR_TGOOD)) - printk(KERN_CRIT PFX "Overheat alarm.(%d)\n",inb_p(WDT_RT)); + if (!(status & WDC_SR_TGOOD)) { + u8 alarm = inb(WDT_RT); + printk(KERN_CRIT PFX "Overheat alarm.(%d)\n", alarm); + udelay(8); + } if (!(status & WDC_SR_PSUOVER)) - printk(KERN_CRIT PFX "PSU over voltage.\n"); + printk(KERN_CRIT PFX "PSU over voltage.\n"); if (!(status & WDC_SR_PSUUNDR)) - printk(KERN_CRIT PFX "PSU under voltage.\n"); + printk(KERN_CRIT PFX "PSU under voltage.\n"); if (tachometer) { if (!(status & WDC_SR_FANGOOD)) printk(KERN_CRIT PFX "Possible fan fault.\n"); @@ -310,6 +353,7 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) printk(KERN_CRIT PFX "Reset in 5ms.\n"); #endif } + spin_unlock(&wdtpci_lock); return IRQ_HANDLED; } @@ -325,7 +369,8 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) * write of data will do, as we we don't define content meaning. */ -static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t wdtpci_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { if (count) { if (!nowayout) { @@ -335,7 +380,7 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co for (i = 0; i != count; i++) { char c; - if(get_user(c, buf+i)) + if (get_user(c, buf+i)) return -EFAULT; if (c == 'V') expect_close = 42; @@ -343,13 +388,11 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co } wdtpci_ping(); } - return count; } /** * wdtpci_ioctl: - * @inode: inode of the device * @file: file handle to the device * @cmd: watchdog command * @arg: argument pointer @@ -359,8 +402,8 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co * querying capabilities and current status. */ -static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long wdtpci_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_heartbeat; int status; @@ -383,33 +426,29 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd ident.options |= WDIOF_FANFAULT; #endif /* CONFIG_WDT_501_PCI */ - switch(cmd) - { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - - case WDIOC_GETSTATUS: - wdtpci_get_status(&status); - return put_user(status, p); - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdtpci_ping(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_heartbeat, p)) - return -EFAULT; - - if (wdtpci_set_heartbeat(new_heartbeat)) - return -EINVAL; - - wdtpci_ping(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, p); - } + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + wdtpci_get_status(&status); + return put_user(status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdtpci_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, p)) + return -EFAULT; + if (wdtpci_set_heartbeat(new_heartbeat)) + return -EINVAL; + wdtpci_ping(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); + } } /** @@ -426,12 +465,11 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd static int wdtpci_open(struct inode *inode, struct file *file) { - if (down_trylock(&open_sem)) + if (test_and_set_bit(0, &open_lock)) return -EBUSY; - if (nowayout) { + if (nowayout) __module_get(THIS_MODULE); - } /* * Activate */ @@ -460,7 +498,7 @@ static int wdtpci_release(struct inode *inode, struct file *file) wdtpci_ping(); } expect_close = 0; - up(&open_sem); + clear_bit(0, &open_lock); return 0; } @@ -476,14 +514,15 @@ static int wdtpci_release(struct inode *inode, struct file *file) * fahrenheit. It was designed by an imperial measurement luddite. */ -static ssize_t wdtpci_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ptr) +static ssize_t wdtpci_temp_read(struct file *file, char __user *buf, + size_t count, loff_t *ptr) { int temperature; if (wdtpci_get_temperature(&temperature)) return -EFAULT; - if (copy_to_user (buf, &temperature, 1)) + if (copy_to_user(buf, &temperature, 1)) return -EFAULT; return 1; @@ -529,12 +568,10 @@ static int wdtpci_temp_release(struct inode *inode, struct file *file) */ static int wdtpci_notify_sys(struct notifier_block *this, unsigned long code, - void *unused) + void *unused) { - if (code==SYS_DOWN || code==SYS_HALT) { - /* Turn the card off */ + if (code == SYS_DOWN || code == SYS_HALT) wdtpci_stop(); - } return NOTIFY_DONE; } @@ -547,7 +584,7 @@ static const struct file_operations wdtpci_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdtpci_write, - .ioctl = wdtpci_ioctl, + .unlocked_ioctl = wdtpci_ioctl, .open = wdtpci_open, .release = wdtpci_release, }; @@ -584,80 +621,85 @@ static struct notifier_block wdtpci_notifier = { }; -static int __devinit wdtpci_init_one (struct pci_dev *dev, - const struct pci_device_id *ent) +static int __devinit wdtpci_init_one(struct pci_dev *dev, + const struct pci_device_id *ent) { int ret = -EIO; dev_count++; if (dev_count > 1) { - printk (KERN_ERR PFX "this driver only supports 1 device\n"); + printk(KERN_ERR PFX "This driver only supports one device\n"); return -ENODEV; } - if (pci_enable_device (dev)) { - printk (KERN_ERR PFX "Not possible to enable PCI Device\n"); + if (pci_enable_device(dev)) { + printk(KERN_ERR PFX "Not possible to enable PCI Device\n"); return -ENODEV; } - if (pci_resource_start (dev, 2) == 0x0000) { - printk (KERN_ERR PFX "No I/O-Address for card detected\n"); + if (pci_resource_start(dev, 2) == 0x0000) { + printk(KERN_ERR PFX "No I/O-Address for card detected\n"); ret = -ENODEV; goto out_pci; } - sema_init(&open_sem, 1); - irq = dev->irq; - io = pci_resource_start (dev, 2); + io = pci_resource_start(dev, 2); - if (request_region (io, 16, "wdt_pci") == NULL) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", io); + if (request_region(io, 16, "wdt_pci") == NULL) { + printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", io); goto out_pci; } - if (request_irq (irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED, + if (request_irq(irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED, "wdt_pci", &wdtpci_miscdev)) { - printk (KERN_ERR PFX "IRQ %d is not free\n", irq); + printk(KERN_ERR PFX "IRQ %d is not free\n", irq); goto out_reg; } - printk ("PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n", - io, irq); + printk(KERN_INFO + "PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n", + io, irq); - /* Check that the heartbeat value is within it's range ; if not reset to the default */ + /* Check that the heartbeat value is within its range; + if not reset to the default */ if (wdtpci_set_heartbeat(heartbeat)) { wdtpci_set_heartbeat(WD_TIMO); - printk(KERN_INFO PFX "heartbeat value must be 0 Date: Tue, 24 Jun 2008 18:51:07 +0400 Subject: power_supply: Sharp SL-6000 (tosa) batteries support This patch adds common battery interface support for Sharp SL-6000 (tosa). Signed-off-by: Dmitry Baryshkov Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 7 + drivers/power/Makefile | 1 + drivers/power/tosa_battery.c | 486 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 494 insertions(+) create mode 100644 drivers/power/tosa_battery.c diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 58c806e9c58a..e3a9c37d08f6 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -49,4 +49,11 @@ config BATTERY_OLPC help Say Y to enable support for the battery on the OLPC laptop. +config BATTERY_TOSA + tristate "Sharp SL-6000 (tosa) battery" + depends on MACH_TOSA && MFD_TC6393XB + help + Say Y to enable support for the battery on the Sharp Zaurus + SL-6000 (tosa) models. + endif # POWER_SUPPLY diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 6413ded5fe5f..1e408fa268cf 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_APM_POWER) += apm_power.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o +obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c new file mode 100644 index 000000000000..bf664fbd6610 --- /dev/null +++ b/drivers/power/tosa_battery.c @@ -0,0 +1,486 @@ +/* + * Battery and Power Management code for the Sharp SL-6000x + * + * Copyright (c) 2005 Dirk Opfer + * Copyright (c) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +static DEFINE_MUTEX(bat_lock); /* protects gpio pins */ +static struct work_struct bat_work; + +struct tosa_bat { + int status; + struct power_supply psy; + int full_chrg; + + struct mutex work_lock; /* protects data */ + + bool (*is_present)(struct tosa_bat *bat); + int gpio_full; + int gpio_charge_off; + + int technology; + + int gpio_bat; + int adc_bat; + int adc_bat_divider; + int bat_max; + int bat_min; + + int gpio_temp; + int adc_temp; + int adc_temp_divider; +}; + +static struct tosa_bat tosa_bat_main; +static struct tosa_bat tosa_bat_jacket; + +static unsigned long tosa_read_bat(struct tosa_bat *bat) +{ + unsigned long value = 0; + + if (bat->gpio_bat < 0 || bat->adc_bat < 0) + return 0; + + mutex_lock(&bat_lock); + gpio_set_value(bat->gpio_bat, 1); + msleep(5); + value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, + bat->adc_bat); + gpio_set_value(bat->gpio_bat, 0); + mutex_unlock(&bat_lock); + + value = value * 1000000 / bat->adc_bat_divider; + + return value; +} + +static unsigned long tosa_read_temp(struct tosa_bat *bat) +{ + unsigned long value = 0; + + if (bat->gpio_temp < 0 || bat->adc_temp < 0) + return 0; + + mutex_lock(&bat_lock); + gpio_set_value(bat->gpio_temp, 1); + msleep(5); + value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, + bat->adc_temp); + gpio_set_value(bat->gpio_temp, 0); + mutex_unlock(&bat_lock); + + value = value * 10000 / bat->adc_temp_divider; + + return value; +} + +static int tosa_bat_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int ret = 0; + struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy); + + if (bat->is_present && !bat->is_present(bat) + && psp != POWER_SUPPLY_PROP_PRESENT) { + return -ENODEV; + } + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = bat->status; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = bat->technology; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = tosa_read_bat(bat); + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + if (bat->full_chrg == -1) + val->intval = bat->bat_max; + else + val->intval = bat->full_chrg; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = bat->bat_max; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = bat->bat_min; + break; + case POWER_SUPPLY_PROP_TEMP: + val->intval = tosa_read_temp(bat); + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = bat->is_present ? bat->is_present(bat) : 1; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static bool tosa_jacket_bat_is_present(struct tosa_bat *bat) +{ + return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0; +} + +static void tosa_bat_external_power_changed(struct power_supply *psy) +{ + schedule_work(&bat_work); +} + +static irqreturn_t tosa_bat_gpio_isr(int irq, void *data) +{ + pr_info("tosa_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq))); + schedule_work(&bat_work); + return IRQ_HANDLED; +} + +static void tosa_bat_update(struct tosa_bat *bat) +{ + int old; + struct power_supply *psy = &bat->psy; + + mutex_lock(&bat->work_lock); + + old = bat->status; + + if (bat->is_present && !bat->is_present(bat)) { + printk(KERN_NOTICE "%s not present\n", psy->name); + bat->status = POWER_SUPPLY_STATUS_UNKNOWN; + bat->full_chrg = -1; + } else if (power_supply_am_i_supplied(psy)) { + if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) { + gpio_set_value(bat->gpio_charge_off, 0); + mdelay(15); + } + + if (gpio_get_value(bat->gpio_full)) { + if (old == POWER_SUPPLY_STATUS_CHARGING || + bat->full_chrg == -1) + bat->full_chrg = tosa_read_bat(bat); + + gpio_set_value(bat->gpio_charge_off, 1); + bat->status = POWER_SUPPLY_STATUS_FULL; + } else { + gpio_set_value(bat->gpio_charge_off, 0); + bat->status = POWER_SUPPLY_STATUS_CHARGING; + } + } else { + gpio_set_value(bat->gpio_charge_off, 1); + bat->status = POWER_SUPPLY_STATUS_DISCHARGING; + } + + if (old != bat->status) + power_supply_changed(psy); + + mutex_unlock(&bat->work_lock); +} + +static void tosa_bat_work(struct work_struct *work) +{ + tosa_bat_update(&tosa_bat_main); + tosa_bat_update(&tosa_bat_jacket); +} + + +static enum power_supply_property tosa_bat_main_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_MAX, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_PRESENT, +}; + +static enum power_supply_property tosa_bat_bu_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_PRESENT, +}; + +static struct tosa_bat tosa_bat_main = { + .status = POWER_SUPPLY_STATUS_DISCHARGING, + .full_chrg = -1, + .psy = { + .name = "main-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = tosa_bat_main_props, + .num_properties = ARRAY_SIZE(tosa_bat_main_props), + .get_property = tosa_bat_get_property, + .external_power_changed = tosa_bat_external_power_changed, + .use_for_apm = 1, + }, + + .gpio_full = TOSA_GPIO_BAT0_CRG, + .gpio_charge_off = TOSA_GPIO_CHARGE_OFF, + + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + + .gpio_bat = TOSA_GPIO_BAT0_V_ON, + .adc_bat = WM97XX_AUX_ID3, + .adc_bat_divider = 414, + .bat_max = 4310000, + .bat_min = 1551 * 1000000 / 414, + + .gpio_temp = TOSA_GPIO_BAT1_TH_ON, + .adc_temp = WM97XX_AUX_ID2, + .adc_temp_divider = 10000, +}; + +static struct tosa_bat tosa_bat_jacket = { + .status = POWER_SUPPLY_STATUS_DISCHARGING, + .full_chrg = -1, + .psy = { + .name = "jacket-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = tosa_bat_main_props, + .num_properties = ARRAY_SIZE(tosa_bat_main_props), + .get_property = tosa_bat_get_property, + .external_power_changed = tosa_bat_external_power_changed, + }, + + .is_present = tosa_jacket_bat_is_present, + .gpio_full = TOSA_GPIO_BAT1_CRG, + .gpio_charge_off = TOSA_GPIO_CHARGE_OFF_JC, + + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + + .gpio_bat = TOSA_GPIO_BAT1_V_ON, + .adc_bat = WM97XX_AUX_ID3, + .adc_bat_divider = 414, + .bat_max = 4310000, + .bat_min = 1551 * 1000000 / 414, + + .gpio_temp = TOSA_GPIO_BAT0_TH_ON, + .adc_temp = WM97XX_AUX_ID2, + .adc_temp_divider = 10000, +}; + +static struct tosa_bat tosa_bat_bu = { + .status = POWER_SUPPLY_STATUS_UNKNOWN, + .full_chrg = -1, + + .psy = { + .name = "backup-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = tosa_bat_bu_props, + .num_properties = ARRAY_SIZE(tosa_bat_bu_props), + .get_property = tosa_bat_get_property, + .external_power_changed = tosa_bat_external_power_changed, + }, + + .gpio_full = -1, + .gpio_charge_off = -1, + + .technology = POWER_SUPPLY_TECHNOLOGY_LiMn, + + .gpio_bat = TOSA_GPIO_BU_CHRG_ON, + .adc_bat = WM97XX_AUX_ID4, + .adc_bat_divider = 1266, + + .gpio_temp = -1, + .adc_temp = -1, + .adc_temp_divider = -1, +}; + +static struct { + int gpio; + char *name; + bool output; + int value; +} gpios[] = { + { TOSA_GPIO_CHARGE_OFF, "main charge off", 1, 1 }, + { TOSA_GPIO_CHARGE_OFF_JC, "jacket charge off", 1, 1 }, + { TOSA_GPIO_BAT_SW_ON, "battery switch", 1, 0 }, + { TOSA_GPIO_BAT0_V_ON, "main battery", 1, 0 }, + { TOSA_GPIO_BAT1_V_ON, "jacket battery", 1, 0 }, + { TOSA_GPIO_BAT1_TH_ON, "main battery temp", 1, 0 }, + { TOSA_GPIO_BAT0_TH_ON, "jacket battery temp", 1, 0 }, + { TOSA_GPIO_BU_CHRG_ON, "backup battery", 1, 0 }, + { TOSA_GPIO_BAT0_CRG, "main battery full", 0, 0 }, + { TOSA_GPIO_BAT1_CRG, "jacket battery full", 0, 0 }, + { TOSA_GPIO_BAT0_LOW, "main battery low", 0, 0 }, + { TOSA_GPIO_BAT1_LOW, "jacket battery low", 0, 0 }, + { TOSA_GPIO_JACKET_DETECT, "jacket detect", 0, 0 }, +}; + +#ifdef CONFIG_PM +static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state) +{ + /* flush all pending status updates */ + flush_scheduled_work(); + return 0; +} + +static int tosa_bat_resume(struct platform_device *dev) +{ + /* things may have changed while we were away */ + schedule_work(&bat_work); + return 0; +} +#else +#define tosa_bat_suspend NULL +#define tosa_bat_resume NULL +#endif + +static int __devinit tosa_bat_probe(struct platform_device *dev) +{ + int ret; + int i; + + if (!machine_is_tosa()) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(gpios); i++) { + ret = gpio_request(gpios[i].gpio, gpios[i].name); + if (ret) { + i--; + goto err_gpio; + } + + if (gpios[i].output) + ret = gpio_direction_output(gpios[i].gpio, + gpios[i].value); + else + ret = gpio_direction_input(gpios[i].gpio); + + if (ret) + goto err_gpio; + } + + mutex_init(&tosa_bat_main.work_lock); + mutex_init(&tosa_bat_jacket.work_lock); + + INIT_WORK(&bat_work, tosa_bat_work); + + ret = power_supply_register(&dev->dev, &tosa_bat_main.psy); + if (ret) + goto err_psy_reg_main; + ret = power_supply_register(&dev->dev, &tosa_bat_jacket.psy); + if (ret) + goto err_psy_reg_jacket; + ret = power_supply_register(&dev->dev, &tosa_bat_bu.psy); + if (ret) + goto err_psy_reg_bu; + + ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), + tosa_bat_gpio_isr, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "main full", &tosa_bat_main); + if (ret) + goto err_req_main; + + ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), + tosa_bat_gpio_isr, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "jacket full", &tosa_bat_jacket); + if (ret) + goto err_req_jacket; + + ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), + tosa_bat_gpio_isr, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "jacket detect", &tosa_bat_jacket); + if (!ret) { + schedule_work(&bat_work); + return 0; + } + + free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket); +err_req_jacket: + free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main); +err_req_main: + power_supply_unregister(&tosa_bat_bu.psy); +err_psy_reg_bu: + power_supply_unregister(&tosa_bat_jacket.psy); +err_psy_reg_jacket: + power_supply_unregister(&tosa_bat_main.psy); +err_psy_reg_main: + + /* see comment in tosa_bat_remove */ + flush_scheduled_work(); + + i--; +err_gpio: + for (; i >= 0; i--) + gpio_free(gpios[i].gpio); + + return ret; +} + +static int __devexit tosa_bat_remove(struct platform_device *dev) +{ + int i; + + free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket); + free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket); + free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main); + + power_supply_unregister(&tosa_bat_bu.psy); + power_supply_unregister(&tosa_bat_jacket.psy); + power_supply_unregister(&tosa_bat_main.psy); + + /* + * now flush all pending work. + * we won't get any more schedules, since all + * sources (isr and external_power_changed) + * are unregistered now. + */ + flush_scheduled_work(); + + for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--) + gpio_free(gpios[i].gpio); + + return 0; +} + +static struct platform_driver tosa_bat_driver = { + .driver.name = "wm97xx-battery", + .driver.owner = THIS_MODULE, + .probe = tosa_bat_probe, + .remove = __devexit_p(tosa_bat_remove), + .suspend = tosa_bat_suspend, + .resume = tosa_bat_resume, +}; + +static int __init tosa_bat_init(void) +{ + return platform_driver_register(&tosa_bat_driver); +} + +static void __exit tosa_bat_exit(void) +{ + platform_driver_unregister(&tosa_bat_driver); +} + +module_init(tosa_bat_init); +module_exit(tosa_bat_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Dmitry Baryshkov"); +MODULE_DESCRIPTION("Tosa battery driver"); +MODULE_ALIAS("platform:wm97xx-battery"); -- cgit v1.2.3 From 2bc7509f62da572925ef33365d4fc16f8b4abdd4 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 15 Jul 2008 17:17:48 +0100 Subject: [ARM] S3C24XX: s3c243xx_clock_register() data can be __initdata Any data being passed to s3c243xx_clock_register() can be marked as __initdata as it is an array of pointers to 'struct clk' that are to be registered on initialisation. The s3c243xx_clock_register function uses this array to register clocks and does not require it to stay around after exit. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-bast.c | 2 +- arch/arm/mach-s3c2410/mach-vr1000.c | 2 +- arch/arm/mach-s3c2440/mach-anubis.c | 2 +- arch/arm/mach-s3c2440/mach-osiris.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 965f27129707..5c289c3a4378 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -562,7 +562,7 @@ static struct platform_device *bast_devices[] __initdata = { &bast_sio, }; -static struct clk *bast_clocks[] = { +static struct clk *bast_clocks[] __initdata = { &s3c24xx_dclk0, &s3c24xx_dclk1, &s3c24xx_clkout0, diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 9a0965ac5e11..7be0bb629bfa 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -344,7 +344,7 @@ static struct platform_device *vr1000_devices[] __initdata = { &vr1000_led3, }; -static struct clk *vr1000_clocks[] = { +static struct clk *vr1000_clocks[] __initdata = { &s3c24xx_dclk0, &s3c24xx_dclk1, &s3c24xx_clkout0, diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 09af8b23500b..0c33a932d65c 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -414,7 +414,7 @@ static struct platform_device *anubis_devices[] __initdata = { &anubis_device_sm501, }; -static struct clk *anubis_clocks[] = { +static struct clk *anubis_clocks[] __initdata = { &s3c24xx_dclk0, &s3c24xx_dclk1, &s3c24xx_clkout0, diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index af996b0e91e8..3869ca2c345e 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -341,7 +341,7 @@ static struct platform_device *osiris_devices[] __initdata = { &osiris_pcmcia, }; -static struct clk *osiris_clocks[] = { +static struct clk *osiris_clocks[] __initdata = { &s3c24xx_dclk0, &s3c24xx_dclk1, &s3c24xx_clkout0, -- cgit v1.2.3 From 19c1d6a34abf73d0baf8e325d018c920fa78dddc Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp" Date: Tue, 8 Jul 2008 01:03:46 +0200 Subject: [ARM] S3C24XX: Fix SERIAL_SAMSUNG entry The SERIAL_SAMSUNG needs SERIAL_CORE but doesn't select it, leading to a build failure. Adding a 'select SERIAL_CORE' cure the trouble. Signed-off-by: Arnaud Patard Signed-off-by: Ben Dooks --- drivers/serial/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 5a9754455eed..047c20d35a98 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -451,6 +451,7 @@ config SERIAL_CLPS711X_CONSOLE config SERIAL_SAMSUNG tristate "Samsung SoC serial support" depends on ARM && PLAT_S3C24XX + select SERIAL_CORE help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, providing /dev/ttySAC0, 1 and 2 (note, some machines may not -- cgit v1.2.3 From d03856bd5e5abac717da137dc60fe4a691769bd0 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Sat, 2 Aug 2008 18:51:32 -0400 Subject: ext4: Fix data corruption when writing to prealloc area Inserting an extent can cause a new entry in the already existing index block. That doesn't increase the depth of the instead. Instead it adds a new leaf block. Now with the new leaf block the path information corresponding to the logical block should be fetched from the new block. The old path will be pointing to the old leaf block. We need to recalucate the path information on extent insert even if depth doesn't change. Without this change, the extent merge after converting an unwritten extent to initialized extent takes the wrong extent and cause data corruption. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 41 +++++++++++++++++++++++------------------ 1 file changed, 23 insertions(+), 18 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 42c4c0c892ed..8ee1fa54a4e1 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2323,7 +2323,10 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, unsigned int newdepth; /* If extent has less than EXT4_EXT_ZERO_LEN zerout directly */ if (allocated <= EXT4_EXT_ZERO_LEN) { - /* Mark first half uninitialized. + /* + * iblock == ee_block is handled by the zerouout + * at the beginning. + * Mark first half uninitialized. * Mark second half initialized and zero out the * initialized extent */ @@ -2346,7 +2349,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, ex->ee_len = orig_ex.ee_len; ext4_ext_store_pblock(ex, ext_pblock(&orig_ex)); ext4_ext_dirty(handle, inode, path + depth); - /* zeroed the full extent */ + /* blocks available from iblock */ return allocated; } else if (err) @@ -2374,6 +2377,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, err = PTR_ERR(path); return err; } + /* get the second half extent details */ ex = path[depth].p_ext; err = ext4_ext_get_access(handle, inode, path + depth); @@ -2403,6 +2407,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, ext4_ext_store_pblock(ex, ext_pblock(&orig_ex)); ext4_ext_dirty(handle, inode, path + depth); /* zeroed the full extent */ + /* blocks available from iblock */ return allocated; } else if (err) @@ -2418,23 +2423,22 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, */ orig_ex.ee_len = cpu_to_le16(ee_len - ext4_ext_get_actual_len(ex3)); - if (newdepth != depth) { - depth = newdepth; - ext4_ext_drop_refs(path); - path = ext4_ext_find_extent(inode, iblock, path); - if (IS_ERR(path)) { - err = PTR_ERR(path); - goto out; - } - eh = path[depth].p_hdr; - ex = path[depth].p_ext; - if (ex2 != &newex) - ex2 = ex; - - err = ext4_ext_get_access(handle, inode, path + depth); - if (err) - goto out; + depth = newdepth; + ext4_ext_drop_refs(path); + path = ext4_ext_find_extent(inode, iblock, path); + if (IS_ERR(path)) { + err = PTR_ERR(path); + goto out; } + eh = path[depth].p_hdr; + ex = path[depth].p_ext; + if (ex2 != &newex) + ex2 = ex; + + err = ext4_ext_get_access(handle, inode, path + depth); + if (err) + goto out; + allocated = max_blocks; /* If extent has less than EXT4_EXT_ZERO_LEN and we are trying @@ -2452,6 +2456,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, ext4_ext_store_pblock(ex, ext_pblock(&orig_ex)); ext4_ext_dirty(handle, inode, path + depth); /* zero out the first half */ + /* blocks available from iblock */ return allocated; } } -- cgit v1.2.3 From 8a266467b8c4841ca994d0fe59f39e584650e3df Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 26 Jul 2008 14:34:21 -0400 Subject: ext4: Allow read/only mounts with corrupted block group checksums If the block group checksums are corrupted, still allow the mount to succeed, so e2fsck can have a chance to try to fix things up. Add code in the remount r/w path to make sure the block group checksums are valid before allowing the filesystem to be remounted read/write. Signed-off-by: "Theodore Ts'o" --- fs/ext4/super.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index b5479b1dff14..876e1c620365 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1626,7 +1626,8 @@ static int ext4_check_descriptors(struct super_block *sb) "Checksum for group %lu failed (%u!=%u)\n", i, le16_to_cpu(ext4_group_desc_csum(sbi, i, gdp)), le16_to_cpu(gdp->bg_checksum)); - return 0; + if (!(sb->s_flags & MS_RDONLY)) + return 0; } if (!flexbg_flag) first_block += EXT4_BLOCKS_PER_GROUP(sb); @@ -2961,6 +2962,7 @@ static int ext4_remount (struct super_block * sb, int * flags, char * data) ext4_fsblk_t n_blocks_count = 0; unsigned long old_sb_flags; struct ext4_mount_options old_opts; + ext4_group_t g; int err; #ifdef CONFIG_QUOTA int i; @@ -3038,6 +3040,26 @@ static int ext4_remount (struct super_block * sb, int * flags, char * data) goto restore_opts; } + /* + * Make sure the group descriptor checksums + * are sane. If they aren't, refuse to + * remount r/w. + */ + for (g = 0; g < sbi->s_groups_count; g++) { + struct ext4_group_desc *gdp = + ext4_get_group_desc(sb, g, NULL); + + if (!ext4_group_desc_csum_verify(sbi, g, gdp)) { + printk(KERN_ERR + "EXT4-fs: ext4_remount: " + "Checksum for group %lu failed (%u!=%u)\n", + g, le16_to_cpu(ext4_group_desc_csum(sbi, g, gdp)), + le16_to_cpu(gdp->bg_checksum)); + err = -EINVAL; + goto restore_opts; + } + } + /* * If we have an unprocessed orphan list hanging * around from a previously readonly bdev mount, -- cgit v1.2.3 From e29d1cde63be0b5f1739416b5574a83c34bf8eeb Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sat, 2 Aug 2008 21:21:02 -0400 Subject: ext4: sync up block and inode bitmap reading functions ext4_read_block_bitmap and read_inode_bitmap do essentially the same thing, and yet they are structured quite differently. I came across this difference while looking at doing bg locking during bg initialization. This patch: * removes unnecessary casts in the error messages * renames read_inode_bitmap to ext4_read_inode_bitmap * and more substantially, restructures the inode bitmap reading function to be more like the block bitmap counterpart. The change to the inode bitmap reader simplifies the locking to be applied in the next patch. Signed-off-by: Eric Sandeen Signed-off-by: Theodore Ts'o --- fs/ext4/balloc.c | 8 ++++---- fs/ext4/ialloc.c | 51 +++++++++++++++++++++++++++++---------------------- 2 files changed, 33 insertions(+), 26 deletions(-) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index 495ab21b9832..386cb79ac4b6 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -314,8 +314,8 @@ ext4_read_block_bitmap(struct super_block *sb, ext4_group_t block_group) if (unlikely(!bh)) { ext4_error(sb, __func__, "Cannot read block bitmap - " - "block_group = %d, block_bitmap = %llu", - (int)block_group, (unsigned long long)bitmap_blk); + "block_group = %lu, block_bitmap = %llu", + block_group, bitmap_blk); return NULL; } if (bh_uptodate_or_lock(bh)) @@ -331,8 +331,8 @@ ext4_read_block_bitmap(struct super_block *sb, ext4_group_t block_group) put_bh(bh); ext4_error(sb, __func__, "Cannot read block bitmap - " - "block_group = %d, block_bitmap = %llu", - (int)block_group, (unsigned long long)bitmap_blk); + "block_group = %lu, block_bitmap = %llu", + block_group, bitmap_blk); return NULL; } ext4_valid_block_bitmap(sb, desc, block_group, bh); diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index a92eb305344f..09cdcd5914d0 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -97,34 +97,41 @@ unsigned ext4_init_inode_bitmap(struct super_block *sb, struct buffer_head *bh, * Return buffer_head of bitmap on success or NULL. */ static struct buffer_head * -read_inode_bitmap(struct super_block *sb, ext4_group_t block_group) +ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group) { struct ext4_group_desc *desc; struct buffer_head *bh = NULL; + ext4_fsblk_t bitmap_blk; desc = ext4_get_group_desc(sb, block_group, NULL); if (!desc) - goto error_out; + return NULL; + bitmap_blk = ext4_inode_bitmap(sb, desc); + bh = sb_getblk(sb, bitmap_blk); + if (unlikely(!bh)) { + ext4_error(sb, __func__, + "Cannot read inode bitmap - " + "block_group = %lu, inode_bitmap = %llu", + block_group, bitmap_blk); + return NULL; + } + if (bh_uptodate_or_lock(bh)) + return bh; + if (desc->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)) { - bh = sb_getblk(sb, ext4_inode_bitmap(sb, desc)); - if (!buffer_uptodate(bh)) { - lock_buffer(bh); - if (!buffer_uptodate(bh)) { - ext4_init_inode_bitmap(sb, bh, block_group, - desc); - set_buffer_uptodate(bh); - } - unlock_buffer(bh); - } - } else { - bh = sb_bread(sb, ext4_inode_bitmap(sb, desc)); + ext4_init_inode_bitmap(sb, bh, block_group, desc); + set_buffer_uptodate(bh); + unlock_buffer(bh); + return bh; } - if (!bh) - ext4_error(sb, "read_inode_bitmap", + if (bh_submit_read(bh) < 0) { + put_bh(bh); + ext4_error(sb, __func__, "Cannot read inode bitmap - " "block_group = %lu, inode_bitmap = %llu", - block_group, ext4_inode_bitmap(sb, desc)); -error_out: + block_group, bitmap_blk); + return NULL; + } return bh; } @@ -200,7 +207,7 @@ void ext4_free_inode (handle_t *handle, struct inode * inode) } block_group = (ino - 1) / EXT4_INODES_PER_GROUP(sb); bit = (ino - 1) % EXT4_INODES_PER_GROUP(sb); - bitmap_bh = read_inode_bitmap(sb, block_group); + bitmap_bh = ext4_read_inode_bitmap(sb, block_group); if (!bitmap_bh) goto error_return; @@ -623,7 +630,7 @@ got_group: goto fail; brelse(bitmap_bh); - bitmap_bh = read_inode_bitmap(sb, group); + bitmap_bh = ext4_read_inode_bitmap(sb, group); if (!bitmap_bh) goto fail; @@ -891,7 +898,7 @@ struct inode *ext4_orphan_get(struct super_block *sb, unsigned long ino) block_group = (ino - 1) / EXT4_INODES_PER_GROUP(sb); bit = (ino - 1) % EXT4_INODES_PER_GROUP(sb); - bitmap_bh = read_inode_bitmap(sb, block_group); + bitmap_bh = ext4_read_inode_bitmap(sb, block_group); if (!bitmap_bh) { ext4_warning(sb, __func__, "inode bitmap error for orphan %lu", ino); @@ -969,7 +976,7 @@ unsigned long ext4_count_free_inodes (struct super_block * sb) continue; desc_count += le16_to_cpu(gdp->bg_free_inodes_count); brelse(bitmap_bh); - bitmap_bh = read_inode_bitmap(sb, i); + bitmap_bh = ext4_read_inode_bitmap(sb, i); if (!bitmap_bh) continue; -- cgit v1.2.3 From b5f10eed8125702929e57cca7e5956b1b9b6d015 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sat, 2 Aug 2008 21:21:08 -0400 Subject: ext4: lock block groups when initializing I noticed when filling a 1T filesystem with 4 threads using the fs_mark benchmark: fs_mark -d /mnt/test -D 256 -n 100000 -t 4 -s 20480 -F -S 0 that I occasionally got checksum mismatch errors: EXT4-fs error (device sdb): ext4_init_inode_bitmap: Checksum bad for group 6935 etc. I'd reliably get 4-5 of them during the run. It appears that the problem is likely a race to init the bg's when the uninit_bg feature is enabled. With the patch below, which adds sb_bgl_locking around initialization, I was able to complete several runs with no errors or warnings. Signed-off-by: Eric Sandeen Signed-off-by: Theodore Ts'o --- fs/ext4/balloc.c | 3 +++ fs/ext4/ialloc.c | 5 ++++- fs/ext4/mballoc.c | 3 +++ fs/ext4/super.c | 2 ++ 4 files changed, 12 insertions(+), 1 deletion(-) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index 386cb79ac4b6..1ae5004e93fc 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -321,12 +321,15 @@ ext4_read_block_bitmap(struct super_block *sb, ext4_group_t block_group) if (bh_uptodate_or_lock(bh)) return bh; + spin_lock(sb_bgl_lock(EXT4_SB(sb), block_group)); if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) { ext4_init_block_bitmap(sb, bh, block_group, desc); set_buffer_uptodate(bh); unlock_buffer(bh); + spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group)); return bh; } + spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group)); if (bh_submit_read(bh) < 0) { put_bh(bh); ext4_error(sb, __func__, diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index 09cdcd5914d0..655e760212b8 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -118,12 +118,15 @@ ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group) if (bh_uptodate_or_lock(bh)) return bh; + spin_lock(sb_bgl_lock(EXT4_SB(sb), block_group)); if (desc->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)) { ext4_init_inode_bitmap(sb, bh, block_group, desc); set_buffer_uptodate(bh); unlock_buffer(bh); + spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group)); return bh; } + spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group)); if (bh_submit_read(bh) < 0) { put_bh(bh); ext4_error(sb, __func__, @@ -735,7 +738,7 @@ got: /* When marking the block group with * ~EXT4_BG_INODE_UNINIT we don't want to depend - * on the value of bg_itable_unsed even though + * on the value of bg_itable_unused even though * mke2fs could have initialized the same for us. * Instead we calculated the value below */ diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 8d141a25bbee..4258d3289a6f 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -787,13 +787,16 @@ static int ext4_mb_init_cache(struct page *page, char *incore) if (bh_uptodate_or_lock(bh[i])) continue; + spin_lock(sb_bgl_lock(EXT4_SB(sb), first_group + i)); if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) { ext4_init_block_bitmap(sb, bh[i], first_group + i, desc); set_buffer_uptodate(bh[i]); unlock_buffer(bh[i]); + spin_unlock(sb_bgl_lock(EXT4_SB(sb), first_group + i)); continue; } + spin_unlock(sb_bgl_lock(EXT4_SB(sb), first_group + i)); get_bh(bh[i]); bh[i]->b_end_io = end_buffer_read_sync; submit_bh(READ, bh[i]); diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 876e1c620365..511997ef6f0e 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1621,6 +1621,7 @@ static int ext4_check_descriptors(struct super_block *sb) "(block %llu)!", i, inode_table); return 0; } + spin_lock(sb_bgl_lock(sbi, i)); if (!ext4_group_desc_csum_verify(sbi, i, gdp)) { printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: " "Checksum for group %lu failed (%u!=%u)\n", @@ -1629,6 +1630,7 @@ static int ext4_check_descriptors(struct super_block *sb) if (!(sb->s_flags & MS_RDONLY)) return 0; } + spin_unlock(sb_bgl_lock(sbi, i)); if (!flexbg_flag) first_block += EXT4_BLOCKS_PER_GROUP(sb); } -- cgit v1.2.3 From ce89f46cb833f89c58a08240faa6b5e963086b8a Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 23 Jul 2008 14:09:29 -0400 Subject: ext4: Improve error handling in mballoc Don't call BUG_ON on file system failures. Instead use ext4_error and also handle the continue case properly. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Theodore Ts'o --- fs/ext4/mballoc.c | 34 +++++++++++++++++++++++----------- 1 file changed, 23 insertions(+), 11 deletions(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 4258d3289a6f..500d3920d41d 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -3736,20 +3736,23 @@ ext4_mb_discard_group_preallocations(struct super_block *sb, bitmap_bh = ext4_read_block_bitmap(sb, group); if (bitmap_bh == NULL) { - /* error handling here */ - ext4_mb_release_desc(&e4b); - BUG_ON(bitmap_bh == NULL); + ext4_error(sb, __func__, "Error in reading block " + "bitmap for %lu\n", group); + return 0; } err = ext4_mb_load_buddy(sb, group, &e4b); - BUG_ON(err != 0); /* error handling here */ + if (err) { + ext4_error(sb, __func__, "Error in loading buddy " + "information for %lu\n", group); + put_bh(bitmap_bh); + return 0; + } if (needed == 0) needed = EXT4_BLOCKS_PER_GROUP(sb) + 1; - grp = ext4_get_group_info(sb, group); INIT_LIST_HEAD(&list); - ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS); repeat: ext4_lock_group(sb, group); @@ -3906,13 +3909,18 @@ repeat: ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, NULL); err = ext4_mb_load_buddy(sb, group, &e4b); - BUG_ON(err != 0); /* error handling here */ + if (err) { + ext4_error(sb, __func__, "Error in loading buddy " + "information for %lu\n", group); + continue; + } bitmap_bh = ext4_read_block_bitmap(sb, group); if (bitmap_bh == NULL) { - /* error handling here */ + ext4_error(sb, __func__, "Error in reading block " + "bitmap for %lu\n", group); ext4_mb_release_desc(&e4b); - BUG_ON(bitmap_bh == NULL); + continue; } ext4_lock_group(sb, group); @@ -4423,11 +4431,15 @@ do_more: count -= overflow; } bitmap_bh = ext4_read_block_bitmap(sb, block_group); - if (!bitmap_bh) + if (!bitmap_bh) { + err = -EIO; goto error_return; + } gdp = ext4_get_group_desc(sb, block_group, &gd_bh); - if (!gdp) + if (!gdp) { + err = -EIO; goto error_return; + } if (in_range(ext4_block_bitmap(sb, gdp), block, count) || in_range(ext4_inode_bitmap(sb, gdp), block, count) || -- cgit v1.2.3 From 1320cbcf771a20b44cf580712b843d213ae75cd3 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 23 Jul 2008 14:09:26 -0400 Subject: ext4: Convert the usage of NR_CPUS to nr_cpu_ids. NR_CPUS can be really large. We should be using nr_cpu_ids instead. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Theodore Ts'o --- fs/ext4/mballoc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 500d3920d41d..49bec8404c5f 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2540,7 +2540,7 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery) sbi->s_mb_history_filter = EXT4_MB_HISTORY_DEFAULT; sbi->s_mb_group_prealloc = MB_DEFAULT_GROUP_PREALLOC; - i = sizeof(struct ext4_locality_group) * NR_CPUS; + i = sizeof(struct ext4_locality_group) * nr_cpu_ids; sbi->s_locality_groups = kmalloc(i, GFP_KERNEL); if (sbi->s_locality_groups == NULL) { clear_opt(sbi->s_mount_opt, MBALLOC); @@ -2548,7 +2548,7 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery) kfree(sbi->s_mb_maxs); return -ENOMEM; } - for (i = 0; i < NR_CPUS; i++) { + for (i = 0; i < nr_cpu_ids; i++) { struct ext4_locality_group *lg; lg = &sbi->s_locality_groups[i]; mutex_init(&lg->lg_mutex); -- cgit v1.2.3 From 6be2ded1d7c51b39144b9f07d2c839e1bd8707f1 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 23 Jul 2008 14:14:05 -0400 Subject: ext4: Don't allow lg prealloc list to be grow large. Currently, the locality group prealloc list is freed only when there is a block allocation failure. This can result in large number of entries in the preallocation list making ext4_mb_use_preallocated() expensive. To fix this, we convert the locality group prealloc list to a hash list. The hash index is the order of number of blocks in the prealloc space with a max order of 9. When adding prealloc space to the list we make sure total entries for each order does not exceed 8. If it is more than 8 we discard few entries and make sure the we have only <= 5 entries. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Theodore Ts'o --- fs/ext4/mballoc.c | 213 +++++++++++++++++++++++++++++++++++++++++++++++------- fs/ext4/mballoc.h | 10 ++- 2 files changed, 193 insertions(+), 30 deletions(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 49bec8404c5f..865e9ddb44d4 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2480,7 +2480,7 @@ err_freesgi: int ext4_mb_init(struct super_block *sb, int needs_recovery) { struct ext4_sb_info *sbi = EXT4_SB(sb); - unsigned i; + unsigned i, j; unsigned offset; unsigned max; int ret; @@ -2552,7 +2552,8 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery) struct ext4_locality_group *lg; lg = &sbi->s_locality_groups[i]; mutex_init(&lg->lg_mutex); - INIT_LIST_HEAD(&lg->lg_prealloc_list); + for (j = 0; j < PREALLOC_TB_SIZE; j++) + INIT_LIST_HEAD(&lg->lg_prealloc_list[j]); spin_lock_init(&lg->lg_prealloc_lock); } @@ -3263,6 +3264,7 @@ static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac, struct ext4_prealloc_space *pa) { unsigned int len = ac->ac_o_ex.fe_len; + ext4_get_group_no_and_offset(ac->ac_sb, pa->pa_pstart, &ac->ac_b_ex.fe_group, &ac->ac_b_ex.fe_start); @@ -3285,6 +3287,7 @@ static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac, static noinline_for_stack int ext4_mb_use_preallocated(struct ext4_allocation_context *ac) { + int order, i; struct ext4_inode_info *ei = EXT4_I(ac->ac_inode); struct ext4_locality_group *lg; struct ext4_prealloc_space *pa; @@ -3325,22 +3328,29 @@ ext4_mb_use_preallocated(struct ext4_allocation_context *ac) lg = ac->ac_lg; if (lg == NULL) return 0; - - rcu_read_lock(); - list_for_each_entry_rcu(pa, &lg->lg_prealloc_list, pa_inode_list) { - spin_lock(&pa->pa_lock); - if (pa->pa_deleted == 0 && pa->pa_free >= ac->ac_o_ex.fe_len) { - atomic_inc(&pa->pa_count); - ext4_mb_use_group_pa(ac, pa); + order = fls(ac->ac_o_ex.fe_len) - 1; + if (order > PREALLOC_TB_SIZE - 1) + /* The max size of hash table is PREALLOC_TB_SIZE */ + order = PREALLOC_TB_SIZE - 1; + + for (i = order; i < PREALLOC_TB_SIZE; i++) { + rcu_read_lock(); + list_for_each_entry_rcu(pa, &lg->lg_prealloc_list[i], + pa_inode_list) { + spin_lock(&pa->pa_lock); + if (pa->pa_deleted == 0 && + pa->pa_free >= ac->ac_o_ex.fe_len) { + atomic_inc(&pa->pa_count); + ext4_mb_use_group_pa(ac, pa); + spin_unlock(&pa->pa_lock); + ac->ac_criteria = 20; + rcu_read_unlock(); + return 1; + } spin_unlock(&pa->pa_lock); - ac->ac_criteria = 20; - rcu_read_unlock(); - return 1; } - spin_unlock(&pa->pa_lock); + rcu_read_unlock(); } - rcu_read_unlock(); - return 0; } @@ -3563,6 +3573,7 @@ ext4_mb_new_group_pa(struct ext4_allocation_context *ac) pa->pa_free = pa->pa_len; atomic_set(&pa->pa_count, 1); spin_lock_init(&pa->pa_lock); + INIT_LIST_HEAD(&pa->pa_inode_list); pa->pa_deleted = 0; pa->pa_linear = 1; @@ -3583,10 +3594,10 @@ ext4_mb_new_group_pa(struct ext4_allocation_context *ac) list_add(&pa->pa_group_list, &grp->bb_prealloc_list); ext4_unlock_group(sb, ac->ac_b_ex.fe_group); - spin_lock(pa->pa_obj_lock); - list_add_tail_rcu(&pa->pa_inode_list, &lg->lg_prealloc_list); - spin_unlock(pa->pa_obj_lock); - + /* + * We will later add the new pa to the right bucket + * after updating the pa_free in ext4_mb_release_context + */ return 0; } @@ -4123,22 +4134,168 @@ ext4_mb_initialize_context(struct ext4_allocation_context *ac, } +static noinline_for_stack void +ext4_mb_discard_lg_preallocations(struct super_block *sb, + struct ext4_locality_group *lg, + int order, int total_entries) +{ + ext4_group_t group = 0; + struct ext4_buddy e4b; + struct list_head discard_list; + struct ext4_prealloc_space *pa, *tmp; + struct ext4_allocation_context *ac; + + mb_debug("discard locality group preallocation\n"); + + INIT_LIST_HEAD(&discard_list); + ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS); + + spin_lock(&lg->lg_prealloc_lock); + list_for_each_entry_rcu(pa, &lg->lg_prealloc_list[order], + pa_inode_list) { + spin_lock(&pa->pa_lock); + if (atomic_read(&pa->pa_count)) { + /* + * This is the pa that we just used + * for block allocation. So don't + * free that + */ + spin_unlock(&pa->pa_lock); + continue; + } + if (pa->pa_deleted) { + spin_unlock(&pa->pa_lock); + continue; + } + /* only lg prealloc space */ + BUG_ON(!pa->pa_linear); + + /* seems this one can be freed ... */ + pa->pa_deleted = 1; + spin_unlock(&pa->pa_lock); + + list_del_rcu(&pa->pa_inode_list); + list_add(&pa->u.pa_tmp_list, &discard_list); + + total_entries--; + if (total_entries <= 5) { + /* + * we want to keep only 5 entries + * allowing it to grow to 8. This + * mak sure we don't call discard + * soon for this list. + */ + break; + } + } + spin_unlock(&lg->lg_prealloc_lock); + + list_for_each_entry_safe(pa, tmp, &discard_list, u.pa_tmp_list) { + + ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, NULL); + if (ext4_mb_load_buddy(sb, group, &e4b)) { + ext4_error(sb, __func__, "Error in loading buddy " + "information for %lu\n", group); + continue; + } + ext4_lock_group(sb, group); + list_del(&pa->pa_group_list); + ext4_mb_release_group_pa(&e4b, pa, ac); + ext4_unlock_group(sb, group); + + ext4_mb_release_desc(&e4b); + list_del(&pa->u.pa_tmp_list); + call_rcu(&(pa)->u.pa_rcu, ext4_mb_pa_callback); + } + if (ac) + kmem_cache_free(ext4_ac_cachep, ac); +} + +/* + * We have incremented pa_count. So it cannot be freed at this + * point. Also we hold lg_mutex. So no parallel allocation is + * possible from this lg. That means pa_free cannot be updated. + * + * A parallel ext4_mb_discard_group_preallocations is possible. + * which can cause the lg_prealloc_list to be updated. + */ + +static void ext4_mb_add_n_trim(struct ext4_allocation_context *ac) +{ + int order, added = 0, lg_prealloc_count = 1; + struct super_block *sb = ac->ac_sb; + struct ext4_locality_group *lg = ac->ac_lg; + struct ext4_prealloc_space *tmp_pa, *pa = ac->ac_pa; + + order = fls(pa->pa_free) - 1; + if (order > PREALLOC_TB_SIZE - 1) + /* The max size of hash table is PREALLOC_TB_SIZE */ + order = PREALLOC_TB_SIZE - 1; + /* Add the prealloc space to lg */ + rcu_read_lock(); + list_for_each_entry_rcu(tmp_pa, &lg->lg_prealloc_list[order], + pa_inode_list) { + spin_lock(&tmp_pa->pa_lock); + if (tmp_pa->pa_deleted) { + spin_unlock(&pa->pa_lock); + continue; + } + if (!added && pa->pa_free < tmp_pa->pa_free) { + /* Add to the tail of the previous entry */ + list_add_tail_rcu(&pa->pa_inode_list, + &tmp_pa->pa_inode_list); + added = 1; + /* + * we want to count the total + * number of entries in the list + */ + } + spin_unlock(&tmp_pa->pa_lock); + lg_prealloc_count++; + } + if (!added) + list_add_tail_rcu(&pa->pa_inode_list, + &lg->lg_prealloc_list[order]); + rcu_read_unlock(); + + /* Now trim the list to be not more than 8 elements */ + if (lg_prealloc_count > 8) { + ext4_mb_discard_lg_preallocations(sb, lg, + order, lg_prealloc_count); + return; + } + return ; +} + /* * release all resource we used in allocation */ static int ext4_mb_release_context(struct ext4_allocation_context *ac) { - if (ac->ac_pa) { - if (ac->ac_pa->pa_linear) { + struct ext4_prealloc_space *pa = ac->ac_pa; + if (pa) { + if (pa->pa_linear) { /* see comment in ext4_mb_use_group_pa() */ - spin_lock(&ac->ac_pa->pa_lock); - ac->ac_pa->pa_pstart += ac->ac_b_ex.fe_len; - ac->ac_pa->pa_lstart += ac->ac_b_ex.fe_len; - ac->ac_pa->pa_free -= ac->ac_b_ex.fe_len; - ac->ac_pa->pa_len -= ac->ac_b_ex.fe_len; - spin_unlock(&ac->ac_pa->pa_lock); + spin_lock(&pa->pa_lock); + pa->pa_pstart += ac->ac_b_ex.fe_len; + pa->pa_lstart += ac->ac_b_ex.fe_len; + pa->pa_free -= ac->ac_b_ex.fe_len; + pa->pa_len -= ac->ac_b_ex.fe_len; + spin_unlock(&pa->pa_lock); + /* + * We want to add the pa to the right bucket. + * Remove it from the list and while adding + * make sure the list to which we are adding + * doesn't grow big. + */ + if (likely(pa->pa_free)) { + spin_lock(pa->pa_obj_lock); + list_del_rcu(&pa->pa_inode_list); + spin_unlock(pa->pa_obj_lock); + ext4_mb_add_n_trim(ac); + } } - ext4_mb_put_pa(ac, ac->ac_sb, ac->ac_pa); + ext4_mb_put_pa(ac, ac->ac_sb, pa); } if (ac->ac_bitmap_page) page_cache_release(ac->ac_bitmap_page); diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h index bfe6add46bcf..c7c9906c2a75 100644 --- a/fs/ext4/mballoc.h +++ b/fs/ext4/mballoc.h @@ -164,11 +164,17 @@ struct ext4_free_extent { * Locality group: * we try to group all related changes together * so that writeback can flush/allocate them together as well + * Size of lg_prealloc_list hash is determined by MB_DEFAULT_GROUP_PREALLOC + * (512). We store prealloc space into the hash based on the pa_free blocks + * order value.ie, fls(pa_free)-1; */ +#define PREALLOC_TB_SIZE 10 struct ext4_locality_group { /* for allocator */ - struct mutex lg_mutex; /* to serialize allocates */ - struct list_head lg_prealloc_list;/* list of preallocations */ + /* to serialize allocates */ + struct mutex lg_mutex; + /* list of preallocations */ + struct list_head lg_prealloc_list[PREALLOC_TB_SIZE]; spinlock_t lg_prealloc_lock; }; -- cgit v1.2.3 From 9c83a923c67df311c467ec956009f0eb4019195d Mon Sep 17 00:00:00 2001 From: Hidehiro Kawai Date: Sat, 26 Jul 2008 16:39:26 -0400 Subject: ext4: don't read inode block if the buffer has a write error A transient I/O error can corrupt inode data. Here is the scenario: (1) update inode_A at the block_B (2) pdflush writes out new inode_A to the filesystem, but it results in write I/O error, at this point, BH_Uptodate flag of the buffer for block_B is cleared and BH_Write_EIO is set (3) create new inode_C which located at block_B, and __ext4_get_inode_loc() tries to read on-disk block_B because the buffer is not uptodate (4) if it can read on-disk block_B successfully, inode_A is overwritten by old data This patch makes __ext4_get_inode_loc() not read the inode block if the buffer has BH_Write_EIO flag. In this case, the buffer should have the latest information, so setting the uptodate flag to the buffer (this avoids WARN_ON_ONCE() in mark_buffer_dirty().) According to this change, we would need to test BH_Write_EIO flag for the error checking. Currently nobody checks write I/O errors on metadata buffers, but it will be done in other patches I'm working on. Signed-off-by: Hidehiro Kawai Cc: sugita Cc: Satoshi OSHIMA Cc: Nick Piggin Cc: Jan Kara Cc: Signed-off-by: Andrew Morton Signed-off-by: Theodore Ts'o --- fs/ext4/inode.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 9843b046c235..efe8caa3811c 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3590,6 +3590,16 @@ static int __ext4_get_inode_loc(struct inode *inode, } if (!buffer_uptodate(bh)) { lock_buffer(bh); + + /* + * If the buffer has the write error flag, we have failed + * to write out another inode in the same block. In this + * case, we don't have to read the block because we may + * read the old inode data successfully. + */ + if (buffer_write_io_error(bh) && !buffer_uptodate(bh)) + set_buffer_uptodate(bh); + if (buffer_uptodate(bh)) { /* someone brought it uptodate while we waited */ unlock_buffer(bh); -- cgit v1.2.3 From e9e34f4e8f42177c66754fec1edfd35e70c18f99 Mon Sep 17 00:00:00 2001 From: Hidehiro Kawai Date: Thu, 31 Jul 2008 22:26:04 -0400 Subject: jbd2: don't abort if flushing file data failed In ordered mode, the current jbd2 aborts the journal if a file data buffer has an error. But this behavior is unintended, and we found that it has been adopted accidentally. This patch undoes it and just calls printk() instead of aborting the journal. Unlike a similar patch for ext3/jbd, file data buffers are written via generic_writepages(). But we also need to set AS_EIO into their mappings because wait_on_page_writeback_range() clears AS_EIO before a user process sees it. Signed-off-by: Hidehiro Kawai Signed-off-by: "Theodore Ts'o" --- fs/jbd2/commit.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index f8b3be873226..adf0395f318e 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -262,8 +262,18 @@ static int journal_finish_inode_data_buffers(journal_t *journal, jinode->i_flags |= JI_COMMIT_RUNNING; spin_unlock(&journal->j_list_lock); err = filemap_fdatawait(jinode->i_vfs_inode->i_mapping); - if (!ret) - ret = err; + if (err) { + /* + * Because AS_EIO is cleared by + * wait_on_page_writeback_range(), set it again so + * that user process can get -EIO from fsync(). + */ + set_bit(AS_EIO, + &jinode->i_vfs_inode->i_mapping->flags); + + if (!ret) + ret = err; + } spin_lock(&journal->j_list_lock); jinode->i_flags &= ~JI_COMMIT_RUNNING; wake_up_bit(&jinode->i_flags, __JI_COMMIT_RUNNING); @@ -670,8 +680,14 @@ start_journal_io: * commit block, which happens below in such setting. */ err = journal_finish_inode_data_buffers(journal, commit_transaction); - if (err) - jbd2_journal_abort(journal, err); + if (err) { + char b[BDEVNAME_SIZE]; + + printk(KERN_WARNING + "JBD2: Detected IO errors while flushing file data " + "on %s\n", bdevname(journal->j_fs_dev, b)); + err = 0; + } /* Lo and behold: we have just managed to send a transaction to the log. Before we can commit it, wait for the IO so far to -- cgit v1.2.3 From d5a0d4f732af3438e592efab4cb80076d1dd81b5 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sat, 2 Aug 2008 18:51:06 -0400 Subject: ext4: fix ext4_da_write_begin error path ext4_da_write_begin needs to call journal_stop before returning, if the page allocation fails. Signed-off-by: Eric Sandeen Acked-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index efe8caa3811c..37f834bc7cd6 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2280,8 +2280,11 @@ retry: } page = __grab_cache_page(mapping, index); - if (!page) - return -ENOMEM; + if (!page) { + ext4_journal_stop(handle); + ret = -ENOMEM; + goto out; + } *pagep = page; ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata, -- cgit v1.2.3 From 0123c93998511978556b03d2bb023af92aa24d55 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 1 Aug 2008 20:57:54 -0400 Subject: ext4: Fix ext4_ext_journal_restart() The ext4_ext_journal_restart() is a convenience function which checks to see if the requested number of credits is present, and if so it closes the current transaction and attaches the current handle to the new transaction. Unfortunately, it wasn't proprely checking the return value from ext4_journal_extend(), so it was starting a new transaction when one was not necessary, and returning an error when all that was necessary was to restart the handle with a new transaction. Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 8ee1fa54a4e1..f554703eb924 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -99,7 +99,7 @@ static int ext4_ext_journal_restart(handle_t *handle, int needed) if (handle->h_buffer_credits > needed) return 0; err = ext4_journal_extend(handle, needed); - if (err) + if (err <= 0) return err; return ext4_journal_restart(handle, needed); } -- cgit v1.2.3 From bc965ab3f2b4b7bb898b11d61d25295c2053b8ac Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 2 Aug 2008 21:10:38 -0400 Subject: ext4: Fix lack of credits BUG() when deleting a badly fragmented inode The extents codepath for ext4_truncate() requests journal transaction credits in very small chunks, requesting only what is needed. This means there may not be enough credits left on the transaction handle after ext4_truncate() returns and then when ext4_delete_inode() tries finish up its work, it may not have enough transaction credits, causing a BUG() oops in the jbd2 core. Also, reserve an extra 2 blocks when starting an ext4_delete_inode() since we need to update the inode bitmap, as well as update the orphaned inode linked list. Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 37f834bc7cd6..2697eaf0368f 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -191,6 +191,7 @@ static int ext4_journal_test_restart(handle_t *handle, struct inode *inode) void ext4_delete_inode (struct inode * inode) { handle_t *handle; + int err; if (ext4_should_order_data(inode)) ext4_begin_ordered_truncate(inode, 0); @@ -199,8 +200,9 @@ void ext4_delete_inode (struct inode * inode) if (is_bad_inode(inode)) goto no_delete; - handle = start_transaction(inode); + handle = ext4_journal_start(inode, blocks_for_truncate(inode)+3); if (IS_ERR(handle)) { + ext4_std_error(inode->i_sb, PTR_ERR(handle)); /* * If we're going to skip the normal cleanup, we still need to * make sure that the in-core orphan linked list is properly @@ -213,8 +215,34 @@ void ext4_delete_inode (struct inode * inode) if (IS_SYNC(inode)) handle->h_sync = 1; inode->i_size = 0; + err = ext4_mark_inode_dirty(handle, inode); + if (err) { + ext4_warning(inode->i_sb, __func__, + "couldn't mark inode dirty (err %d)", err); + goto stop_handle; + } if (inode->i_blocks) ext4_truncate(inode); + + /* + * ext4_ext_truncate() doesn't reserve any slop when it + * restarts journal transactions; therefore there may not be + * enough credits left in the handle to remove the inode from + * the orphan list and set the dtime field. + */ + if (handle->h_buffer_credits < 3) { + err = ext4_journal_extend(handle, 3); + if (err > 0) + err = ext4_journal_restart(handle, 3); + if (err != 0) { + ext4_warning(inode->i_sb, __func__, + "couldn't extend journal (err %d)", err); + stop_handle: + ext4_journal_stop(handle); + goto no_delete; + } + } + /* * Kill off the orphan record which ext4_truncate created. * AKPM: I think this can be inside the above `if'. -- cgit v1.2.3 From 34071da71a665d8c81e3b3467c9a2e7c56386fec Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 1 Aug 2008 21:59:19 -0400 Subject: ext4: don't assume extents can't cross block groups when truncating With the FLEX_BG layout, there is no reason why extents can't cross block groups, so make the truncate code reserve enough credits so we don't BUG if we come across such an extent. Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index f554703eb924..f7529e27d791 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -1910,9 +1910,13 @@ ext4_ext_rm_leaf(handle_t *handle, struct inode *inode, BUG_ON(b != ex_ee_block + ex_ee_len - 1); } - /* at present, extent can't cross block group: */ - /* leaf + bitmap + group desc + sb + inode */ - credits = 5; + /* + * 3 for leaf, sb, and inode plus 2 (bmap and group + * descriptor) for each block group; assume two block + * groups plus ex_ee_len/blocks_per_block_group for + * the worst case + */ + credits = 7 + 2*(ex_ee_len/EXT4_BLOCKS_PER_GROUP(inode->i_sb)); if (ex == EXT_FIRST_EXTENT(eh)) { correct_index = 1; credits += (ext_depth(inode)) + 1; -- cgit v1.2.3 From 12219aea6b944e36795267be31d43f9c484841be Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Thu, 17 Jul 2008 16:12:08 -0400 Subject: ext4: Cleanup the block reservation code path The truncate patch should not use the i_allocated_meta_blocks value. So add seperate functions to be used in the truncate and alloc path. We also need to release the meta-data block that we reserved for the blocks that we are truncating. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Theodore Ts'o --- fs/ext4/ext4.h | 1 - fs/ext4/inode.c | 108 +++++++++++++++++++++++++++++++++++--------------------- 2 files changed, 67 insertions(+), 42 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 303e41cf7b14..6c7924d9e358 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1044,7 +1044,6 @@ extern void ext4_mb_update_group_info(struct ext4_group_info *grp, /* inode.c */ -void ext4_da_release_space(struct inode *inode, int used, int to_free); int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode, struct buffer_head *bh, ext4_fsblk_t blocknr); struct buffer_head *ext4_getblk(handle_t *, struct inode *, diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 2697eaf0368f..85a862c9c4cc 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -980,6 +980,67 @@ out: return err; } +/* + * Calculate the number of metadata blocks need to reserve + * to allocate @blocks for non extent file based file + */ +static int ext4_indirect_calc_metadata_amount(struct inode *inode, int blocks) +{ + int icap = EXT4_ADDR_PER_BLOCK(inode->i_sb); + int ind_blks, dind_blks, tind_blks; + + /* number of new indirect blocks needed */ + ind_blks = (blocks + icap - 1) / icap; + + dind_blks = (ind_blks + icap - 1) / icap; + + tind_blks = 1; + + return ind_blks + dind_blks + tind_blks; +} + +/* + * Calculate the number of metadata blocks need to reserve + * to allocate given number of blocks + */ +static int ext4_calc_metadata_amount(struct inode *inode, int blocks) +{ + if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) + return ext4_ext_calc_metadata_amount(inode, blocks); + + return ext4_indirect_calc_metadata_amount(inode, blocks); +} + +static void ext4_da_update_reserve_space(struct inode *inode, int used) +{ + struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); + int total, mdb, mdb_free; + + spin_lock(&EXT4_I(inode)->i_block_reservation_lock); + /* recalculate the number of metablocks still need to be reserved */ + total = EXT4_I(inode)->i_reserved_data_blocks - used; + mdb = ext4_calc_metadata_amount(inode, total); + + /* figure out how many metablocks to release */ + BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); + mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb; + + /* Account for allocated meta_blocks */ + mdb_free -= EXT4_I(inode)->i_allocated_meta_blocks; + + /* update fs free blocks counter for truncate case */ + percpu_counter_add(&sbi->s_freeblocks_counter, mdb_free); + + /* update per-inode reservations */ + BUG_ON(used > EXT4_I(inode)->i_reserved_data_blocks); + EXT4_I(inode)->i_reserved_data_blocks -= used; + + BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); + EXT4_I(inode)->i_reserved_meta_blocks = mdb; + EXT4_I(inode)->i_allocated_meta_blocks = 0; + spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); +} + /* Maximum number of blocks we map for direct IO at once. */ #define DIO_MAX_BLOCKS 4096 /* @@ -1097,7 +1158,7 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block, * which were deferred till now */ if ((retval > 0) && buffer_delay(bh)) - ext4_da_release_space(inode, retval, 0); + ext4_da_update_reserve_space(inode, retval); } up_write((&EXT4_I(inode)->i_data_sem)); @@ -1465,36 +1526,6 @@ static int ext4_journalled_write_end(struct file *file, return ret ? ret : copied; } -/* - * Calculate the number of metadata blocks need to reserve - * to allocate @blocks for non extent file based file - */ -static int ext4_indirect_calc_metadata_amount(struct inode *inode, int blocks) -{ - int icap = EXT4_ADDR_PER_BLOCK(inode->i_sb); - int ind_blks, dind_blks, tind_blks; - - /* number of new indirect blocks needed */ - ind_blks = (blocks + icap - 1) / icap; - - dind_blks = (ind_blks + icap - 1) / icap; - - tind_blks = 1; - - return ind_blks + dind_blks + tind_blks; -} - -/* - * Calculate the number of metadata blocks need to reserve - * to allocate given number of blocks - */ -static int ext4_calc_metadata_amount(struct inode *inode, int blocks) -{ - if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) - return ext4_ext_calc_metadata_amount(inode, blocks); - - return ext4_indirect_calc_metadata_amount(inode, blocks); -} static int ext4_da_reserve_space(struct inode *inode, int nrblocks) { @@ -1518,7 +1549,6 @@ static int ext4_da_reserve_space(struct inode *inode, int nrblocks) spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); return -ENOSPC; } - /* reduce fs free blocks counter */ percpu_counter_sub(&sbi->s_freeblocks_counter, total); @@ -1529,35 +1559,31 @@ static int ext4_da_reserve_space(struct inode *inode, int nrblocks) return 0; /* success */ } -void ext4_da_release_space(struct inode *inode, int used, int to_free) +static void ext4_da_release_space(struct inode *inode, int to_free) { struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); int total, mdb, mdb_free, release; spin_lock(&EXT4_I(inode)->i_block_reservation_lock); /* recalculate the number of metablocks still need to be reserved */ - total = EXT4_I(inode)->i_reserved_data_blocks - used - to_free; + total = EXT4_I(inode)->i_reserved_data_blocks - to_free; mdb = ext4_calc_metadata_amount(inode, total); /* figure out how many metablocks to release */ BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb; - /* Account for allocated meta_blocks */ - mdb_free -= EXT4_I(inode)->i_allocated_meta_blocks; - release = to_free + mdb_free; /* update fs free blocks counter for truncate case */ percpu_counter_add(&sbi->s_freeblocks_counter, release); /* update per-inode reservations */ - BUG_ON(used + to_free > EXT4_I(inode)->i_reserved_data_blocks); - EXT4_I(inode)->i_reserved_data_blocks -= (used + to_free); + BUG_ON(to_free > EXT4_I(inode)->i_reserved_data_blocks); + EXT4_I(inode)->i_reserved_data_blocks -= to_free; BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); EXT4_I(inode)->i_reserved_meta_blocks = mdb; - EXT4_I(inode)->i_allocated_meta_blocks = 0; spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); } @@ -1579,7 +1605,7 @@ static void ext4_da_page_release_reservation(struct page *page, } curr_off = next_off; } while ((bh = bh->b_this_page) != head); - ext4_da_release_space(page->mapping->host, 0, to_release); + ext4_da_release_space(page->mapping->host, to_release); } /* -- cgit v1.2.3 From 317602f3e01a25320a712195b32fcf19c1297121 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sun, 20 Jul 2008 23:41:24 -0700 Subject: lockd: trivial sparse endian annotations fs/lockd/svcproc.c:115:11: warning: incorrect type in initializer (different base types) fs/lockd/svcproc.c:115:11: expected int [signed] rc fs/lockd/svcproc.c:115:11: got restricted __be32 [usertype] ... and so on... Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: J. Bruce Fields --- fs/lockd/svc4proc.c | 4 ++-- fs/lockd/svcproc.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/lockd/svc4proc.c b/fs/lockd/svc4proc.c index 399444639337..4a714f64515b 100644 --- a/fs/lockd/svc4proc.c +++ b/fs/lockd/svc4proc.c @@ -83,7 +83,7 @@ nlm4svc_proc_test(struct svc_rqst *rqstp, struct nlm_args *argp, { struct nlm_host *host; struct nlm_file *file; - int rc = rpc_success; + __be32 rc = rpc_success; dprintk("lockd: TEST4 called\n"); resp->cookie = argp->cookie; @@ -116,7 +116,7 @@ nlm4svc_proc_lock(struct svc_rqst *rqstp, struct nlm_args *argp, { struct nlm_host *host; struct nlm_file *file; - int rc = rpc_success; + __be32 rc = rpc_success; dprintk("lockd: LOCK called\n"); diff --git a/fs/lockd/svcproc.c b/fs/lockd/svcproc.c index 76019d2ff72d..76262c1986f2 100644 --- a/fs/lockd/svcproc.c +++ b/fs/lockd/svcproc.c @@ -112,7 +112,7 @@ nlmsvc_proc_test(struct svc_rqst *rqstp, struct nlm_args *argp, { struct nlm_host *host; struct nlm_file *file; - int rc = rpc_success; + __be32 rc = rpc_success; dprintk("lockd: TEST called\n"); resp->cookie = argp->cookie; @@ -146,7 +146,7 @@ nlmsvc_proc_lock(struct svc_rqst *rqstp, struct nlm_args *argp, { struct nlm_host *host; struct nlm_file *file; - int rc = rpc_success; + __be32 rc = rpc_success; dprintk("lockd: LOCK called\n"); -- cgit v1.2.3 From e8b43555a2a8c71e8501924e260f62b9545c598b Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Wed, 23 Jul 2008 08:49:50 -0400 Subject: MAINTAINERS: mention lockd and sunrpc in nfs entries The actual division of labor is a little vague in some of the common code, but if the patches get to one of us then we can sort it out. Signed-off-by: J. Bruce Fields --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0652ab384d51..c382ad39bb9b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2418,7 +2418,7 @@ L: kernel-janitors@vger.kernel.org W: http://www.kerneljanitors.org/ S: Maintained -KERNEL NFSD +KERNEL NFSD, SUNRPC, AND LOCKD SERVERS P: J. Bruce Fields M: bfields@fieldses.org P: Neil Brown @@ -3036,7 +3036,7 @@ M: ja@ssi.bg L: netdev@vger.kernel.org S: Maintained -NFS CLIENT +NFS, SUNRPC, AND LOCKD CLIENTS P: Trond Myklebust M: Trond.Myklebust@netapp.com L: linux-nfs@vger.kernel.org -- cgit v1.2.3 From c9f21aaff1d1fb5629325130af469532d19beb93 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 23 Jul 2008 12:05:51 -0700 Subject: md: move async_tx_issue_pending_all outside spin_lock_irq Some dma drivers need to call spin_lock_bh in their device_issue_pending routines. This change avoids: WARNING: at kernel/softirq.c:136 local_bh_enable_ip+0x3a/0x85() Signed-off-by: Dan Williams --- drivers/md/raid5.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 42a480ba767b..8a6f101d3225 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3809,10 +3809,8 @@ static void raid5d(mddev_t *mddev) sh = __get_priority_stripe(conf); - if (!sh) { - async_tx_issue_pending_all(); + if (!sh) break; - } spin_unlock_irq(&conf->device_lock); handled++; @@ -3825,6 +3823,7 @@ static void raid5d(mddev_t *mddev) spin_unlock_irq(&conf->device_lock); + async_tx_issue_pending_all(); unplug_slaves(mddev); pr_debug("--- raid5d inactive\n"); -- cgit v1.2.3 From 2339788376e2d69a9154130e4dacd5b21ce63094 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 23 Jul 2008 20:05:34 -0700 Subject: md: fix merge error The original STRIPE_OP_IO removal patch had the following hunk: - for (i = conf->raid_disks; i--; ) { + for (i = conf->raid_disks; i--; ) set_bit(R5_Wantwrite, &sh->dev[i].flags); - if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending)) - sh->ops.count++; - } However it appears the hunk became broken after merging: - for (i = conf->raid_disks; i--; ) { + for (i = conf->raid_disks; i--; ) set_bit(R5_Wantwrite, &sh->dev[i].flags); set_bit(R5_LOCKED, &dev->flags); s.locked++; - if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending)) - sh->ops.count++; - } Signed-off-by: Dan Williams --- drivers/md/raid5.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 8a6f101d3225..46132fca3469 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2717,10 +2717,11 @@ static void handle_stripe5(struct stripe_head *sh) if (sh->reconstruct_state == reconstruct_state_result) { sh->reconstruct_state = reconstruct_state_idle; clear_bit(STRIPE_EXPANDING, &sh->state); - for (i = conf->raid_disks; i--; ) + for (i = conf->raid_disks; i--; ) { set_bit(R5_Wantwrite, &sh->dev[i].flags); - set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_LOCKED, &sh->dev[i].flags); s.locked++; + } } if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state) && -- cgit v1.2.3 From d8e64406a037a64444175730294e449c9e21f5ec Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 23 Jul 2008 13:09:48 -0700 Subject: md: delay notification of 'active_idle' to the recovery thread sysfs_notify might sleep, so do not call it from md_safemode_timeout. Signed-off-by: Dan Williams --- drivers/md/md.c | 5 ++++- include/linux/raid/md_k.h | 1 + 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index c2ff77ccec50..0f1b83096425 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3483,7 +3483,7 @@ static void md_safemode_timeout(unsigned long data) if (!atomic_read(&mddev->writes_pending)) { mddev->safemode = 1; if (mddev->external) - sysfs_notify(&mddev->kobj, NULL, "array_state"); + set_bit(MD_NOTIFY_ARRAY_STATE, &mddev->flags); } md_wakeup_thread(mddev->thread); } @@ -6051,6 +6051,9 @@ void md_check_recovery(mddev_t *mddev) if (mddev->bitmap) bitmap_daemon_work(mddev->bitmap); + if (test_and_clear_bit(MD_NOTIFY_ARRAY_STATE, &mddev->flags)) + sysfs_notify(&mddev->kobj, NULL, "array_state"); + if (mddev->ro) return; diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h index 9f2549ac0e2d..c200b9a34aff 100644 --- a/include/linux/raid/md_k.h +++ b/include/linux/raid/md_k.h @@ -128,6 +128,7 @@ struct mddev_s #define MD_CHANGE_DEVS 0 /* Some device status has changed */ #define MD_CHANGE_CLEAN 1 /* transition to or from 'clean' */ #define MD_CHANGE_PENDING 2 /* superblock update in progress */ +#define MD_NOTIFY_ARRAY_STATE 3 /* atomic context wants to notify userspace */ int ro; -- cgit v1.2.3 From 4dfce4075aa4e2eee35e52a78dbabfe37d94c908 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Mon, 30 Jun 2008 19:06:40 +0200 Subject: WAN: cosmetic changes to generic HDLC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/hdlc.c | 25 ++++++++++++------------- drivers/net/wan/hdlc_cisco.c | 29 ++++++++++++++--------------- drivers/net/wan/hdlc_fr.c | 19 +++++++++---------- drivers/net/wan/hdlc_ppp.c | 15 +++++++-------- drivers/net/wan/hdlc_raw.c | 15 +++++++-------- drivers/net/wan/hdlc_raw_eth.c | 17 ++++++++--------- drivers/net/wan/hdlc_x25.c | 17 ++++++++--------- 7 files changed, 65 insertions(+), 72 deletions(-) diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c index e3a536477c7e..1f2a140c9f7c 100644 --- a/drivers/net/wan/hdlc.c +++ b/drivers/net/wan/hdlc.c @@ -22,20 +22,19 @@ * - proto->start() and stop() are called with spin_lock_irq held. */ -#include -#include -#include -#include #include +#include #include +#include #include -#include +#include +#include +#include #include -#include -#include +#include #include -#include -#include +#include +#include #include @@ -109,7 +108,7 @@ static int hdlc_device_event(struct notifier_block *this, unsigned long event, if (dev->get_stats != hdlc_get_stats) return NOTIFY_DONE; /* not an HDLC device */ - + if (event != NETDEV_CHANGE) return NOTIFY_DONE; /* Only interrested in carrier changes */ @@ -357,7 +356,7 @@ static struct packet_type hdlc_packet_type = { static struct notifier_block hdlc_notifier = { - .notifier_call = hdlc_device_event, + .notifier_call = hdlc_device_event, }; @@ -367,8 +366,8 @@ static int __init hdlc_module_init(void) printk(KERN_INFO "%s\n", version); if ((result = register_netdevice_notifier(&hdlc_notifier)) != 0) - return result; - dev_add_pack(&hdlc_packet_type); + return result; + dev_add_pack(&hdlc_packet_type); return 0; } diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c index 849819c2552d..44e64b15dbd1 100644 --- a/drivers/net/wan/hdlc_cisco.c +++ b/drivers/net/wan/hdlc_cisco.c @@ -9,19 +9,18 @@ * as published by the Free Software Foundation. */ -#include -#include -#include -#include #include +#include #include +#include #include -#include +#include +#include #include -#include -#include +#include #include -#include +#include +#include #undef DEBUG_HARD_HEADER @@ -68,9 +67,9 @@ struct cisco_state { static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr); -static inline struct cisco_state * state(hdlc_device *hdlc) +static inline struct cisco_state* state(hdlc_device *hdlc) { - return(struct cisco_state *)(hdlc->state); + return (struct cisco_state *)hdlc->state; } @@ -172,7 +171,7 @@ static int cisco_rx(struct sk_buff *skb) data->address != CISCO_UNICAST) goto rx_error; - switch(ntohs(data->protocol)) { + switch (ntohs(data->protocol)) { case CISCO_SYS_INFO: /* Packet is not needed, drop it. */ dev_kfree_skb_any(skb); @@ -336,7 +335,7 @@ static struct hdlc_proto proto = { static const struct header_ops cisco_header_ops = { .create = cisco_hard_header, }; - + static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr) { cisco_proto __user *cisco_s = ifr->ifr_settings.ifs_ifsu.cisco; @@ -359,10 +358,10 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr) return 0; case IF_PROTO_CISCO: - if(!capable(CAP_NET_ADMIN)) + if (!capable(CAP_NET_ADMIN)) return -EPERM; - if(dev->flags & IFF_UP) + if (dev->flags & IFF_UP) return -EBUSY; if (copy_from_user(&new_settings, cisco_s, size)) @@ -372,7 +371,7 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr) new_settings.timeout < 2) return -EINVAL; - result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); + result = hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); if (result) return result; diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index 62e93dac6b13..d3d5055741ad 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -33,20 +33,19 @@ */ -#include -#include -#include -#include #include +#include +#include #include +#include #include -#include +#include +#include #include -#include -#include +#include #include -#include -#include +#include +#include #undef DEBUG_PKT #undef DEBUG_ECN @@ -96,7 +95,7 @@ typedef struct { unsigned ea1: 1; unsigned cr: 1; unsigned dlcih: 6; - + unsigned ea2: 1; unsigned de: 1; unsigned becn: 1; diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c index 00308337928e..4efe9e6d32d5 100644 --- a/drivers/net/wan/hdlc_ppp.c +++ b/drivers/net/wan/hdlc_ppp.c @@ -9,19 +9,18 @@ * as published by the Free Software Foundation. */ -#include -#include -#include -#include #include +#include #include +#include #include -#include +#include +#include #include -#include -#include +#include #include -#include +#include +#include #include struct ppp_state { diff --git a/drivers/net/wan/hdlc_raw.c b/drivers/net/wan/hdlc_raw.c index bbbb819d764c..8612311748f4 100644 --- a/drivers/net/wan/hdlc_raw.c +++ b/drivers/net/wan/hdlc_raw.c @@ -9,19 +9,18 @@ * as published by the Free Software Foundation. */ -#include -#include -#include -#include #include +#include #include +#include #include -#include +#include +#include #include -#include -#include +#include #include -#include +#include +#include static int raw_ioctl(struct net_device *dev, struct ifreq *ifr); diff --git a/drivers/net/wan/hdlc_raw_eth.c b/drivers/net/wan/hdlc_raw_eth.c index 26dee600506f..a13fc3207520 100644 --- a/drivers/net/wan/hdlc_raw_eth.c +++ b/drivers/net/wan/hdlc_raw_eth.c @@ -9,20 +9,19 @@ * as published by the Free Software Foundation. */ -#include -#include -#include -#include #include +#include +#include #include +#include #include -#include +#include +#include #include -#include -#include +#include #include -#include -#include +#include +#include static int raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr); diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c index e808720030ef..8b7e5d2e2ac9 100644 --- a/drivers/net/wan/hdlc_x25.c +++ b/drivers/net/wan/hdlc_x25.c @@ -9,20 +9,19 @@ * as published by the Free Software Foundation. */ -#include -#include -#include -#include #include +#include #include -#include -#include -#include #include +#include +#include #include +#include +#include +#include #include -#include - +#include +#include #include static int x25_ioctl(struct net_device *dev, struct ifreq *ifr); -- cgit v1.2.3 From 86f584f08767160a745a50ed675e12b8f8bfbf30 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Tue, 1 Jul 2008 15:10:11 +0200 Subject: Remove bogus dosyncppp variable from synclink drivers. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/char/pcmcia/synclink_cs.c | 4 ---- drivers/char/synclink.c | 4 ---- drivers/char/synclink_gt.c | 5 ----- drivers/char/synclinkmp.c | 4 ---- 4 files changed, 17 deletions(-) diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index b694d430f10e..36a0afa89aaf 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -232,7 +232,6 @@ typedef struct _mgslpc_info { /* SPPP/Cisco HDLC device parts */ int netcount; - int dosyncppp; spinlock_t netlock; #if SYNCLINK_GENERIC_HDLC @@ -459,13 +458,11 @@ static int ttymajor=0; static int debug_level = 0; static int maxframe[MAX_DEVICE_COUNT] = {0,}; -static int dosyncppp[MAX_DEVICE_COUNT] = {1,1,1,1}; module_param(break_on_load, bool, 0); module_param(ttymajor, int, 0); module_param(debug_level, int, 0); module_param_array(maxframe, int, NULL, 0); -module_param_array(dosyncppp, int, NULL, 0); MODULE_LICENSE("GPL"); @@ -2914,7 +2911,6 @@ static void mgslpc_add_device(MGSLPC_INFO *info) if (info->line < MAX_DEVICE_COUNT) { if (maxframe[info->line]) info->max_frame_size = maxframe[info->line]; - info->dosyncppp = dosyncppp[info->line]; } mgslpc_device_count++; diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 527d220aa4aa..2b9e930097e4 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -304,7 +304,6 @@ struct mgsl_struct { /* generic HDLC device parts */ int netcount; - int dosyncppp; spinlock_t netlock; #if SYNCLINK_GENERIC_HDLC @@ -868,7 +867,6 @@ static int irq[MAX_ISA_DEVICES]; static int dma[MAX_ISA_DEVICES]; static int debug_level; static int maxframe[MAX_TOTAL_DEVICES]; -static int dosyncppp[MAX_TOTAL_DEVICES]; static int txdmabufs[MAX_TOTAL_DEVICES]; static int txholdbufs[MAX_TOTAL_DEVICES]; @@ -879,7 +877,6 @@ module_param_array(irq, int, NULL, 0); module_param_array(dma, int, NULL, 0); module_param(debug_level, int, 0); module_param_array(maxframe, int, NULL, 0); -module_param_array(dosyncppp, int, NULL, 0); module_param_array(txdmabufs, int, NULL, 0); module_param_array(txholdbufs, int, NULL, 0); @@ -4257,7 +4254,6 @@ static void mgsl_add_device( struct mgsl_struct *info ) if (info->line < MAX_TOTAL_DEVICES) { if (maxframe[info->line]) info->max_frame_size = maxframe[info->line]; - info->dosyncppp = dosyncppp[info->line]; if (txdmabufs[info->line]) { info->num_tx_dma_buffers = txdmabufs[info->line]; diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 2c3e43bb2cc9..88083b066261 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -128,17 +128,14 @@ static int slgt_device_count; static int ttymajor; static int debug_level; static int maxframe[MAX_DEVICES]; -static int dosyncppp[MAX_DEVICES]; module_param(ttymajor, int, 0); module_param(debug_level, int, 0); module_param_array(maxframe, int, NULL, 0); -module_param_array(dosyncppp, int, NULL, 0); MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned"); MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail"); MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)"); -MODULE_PARM_DESC(dosyncppp, "Enable synchronous net device, 0=disable 1=enable"); /* * tty support and callbacks @@ -348,7 +345,6 @@ struct slgt_info { /* SPPP/Cisco HDLC device parts */ int netcount; - int dosyncppp; spinlock_t netlock; #if SYNCLINK_GENERIC_HDLC struct net_device *netdev; @@ -3385,7 +3381,6 @@ static void add_device(struct slgt_info *info) if (info->line < MAX_DEVICES) { if (maxframe[info->line]) info->max_frame_size = maxframe[info->line]; - info->dosyncppp = dosyncppp[info->line]; } slgt_device_count++; diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 5768c4136342..f2edfad360d3 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -270,7 +270,6 @@ typedef struct _synclinkmp_info { /* SPPP/Cisco HDLC device parts */ int netcount; - int dosyncppp; spinlock_t netlock; #if SYNCLINK_GENERIC_HDLC @@ -469,13 +468,11 @@ static int ttymajor = 0; */ static int debug_level = 0; static int maxframe[MAX_DEVICES] = {0,}; -static int dosyncppp[MAX_DEVICES] = {0,}; module_param(break_on_load, bool, 0); module_param(ttymajor, int, 0); module_param(debug_level, int, 0); module_param_array(maxframe, int, NULL, 0); -module_param_array(dosyncppp, int, NULL, 0); static char *driver_name = "SyncLink MultiPort driver"; static char *driver_version = "$Revision: 4.38 $"; @@ -3751,7 +3748,6 @@ static void add_device(SLMP_INFO *info) if (info->line < MAX_DEVICES) { if (maxframe[info->line]) info->max_frame_size = maxframe[info->line]; - info->dosyncppp = dosyncppp[info->line]; } synclinkmp_device_count++; -- cgit v1.2.3 From efa415840d462caf30002d259db20338b546a94b Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Tue, 1 Jul 2008 15:28:10 +0200 Subject: Remove bogus variables from syncppp.[ch] MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/syncppp.c | 9 --------- include/net/syncppp.h | 2 -- 2 files changed, 11 deletions(-) diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c index 29b4b94e4947..327d58589e12 100644 --- a/drivers/net/wan/syncppp.c +++ b/drivers/net/wan/syncppp.c @@ -230,13 +230,6 @@ static void sppp_input (struct net_device *dev, struct sk_buff *skb) skb->dev=dev; skb_reset_mac_header(skb); - if (dev->flags & IFF_RUNNING) - { - /* Count received bytes, add FCS and one flag */ - sp->ibytes+= skb->len + 3; - sp->ipkts++; - } - if (!pskb_may_pull(skb, PPP_HEADER_LEN)) { /* Too small packet, drop it. */ if (sp->pp_flags & PP_DEBUG) @@ -832,7 +825,6 @@ static void sppp_cp_send (struct sppp *sp, u16 proto, u8 type, sppp_print_bytes ((u8*) (lh+1), len); printk (">\n"); } - sp->obytes += skb->len; /* Control is high priority so it doesn't get queued behind data */ skb->priority=TC_PRIO_CONTROL; skb->dev = dev; @@ -875,7 +867,6 @@ static void sppp_cisco_send (struct sppp *sp, int type, u32 par1, u32 par2) printk (KERN_WARNING "%s: cisco output: <%xh %xh %xh %xh %xh-%xh>\n", dev->name, ntohl (ch->type), ch->par1, ch->par2, ch->rel, ch->time0, ch->time1); - sp->obytes += skb->len; skb->priority=TC_PRIO_CONTROL; skb->dev = dev; skb_queue_tail(&tx_queue, skb); diff --git a/include/net/syncppp.h b/include/net/syncppp.h index e43f4070d892..9e306f7f579a 100644 --- a/include/net/syncppp.h +++ b/include/net/syncppp.h @@ -43,8 +43,6 @@ struct sppp u32 pp_rseq; /* remote sequence number */ struct slcp lcp; /* LCP params */ struct sipcp ipcp; /* IPCP params */ - u32 ibytes,obytes; /* Bytes in/out */ - u32 ipkts,opkts; /* Packets in/out */ struct timer_list pp_timer; struct net_device *pp_if; char pp_link_state; /* Link status */ -- cgit v1.2.3 From a24e202e3ffdbd1da45ceab8e60824720c6ab7fd Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Tue, 1 Jul 2008 20:18:49 +0200 Subject: Remove dead code from wanmain.c, CONFIG_WANPIPE_MULTPPP doesn't exist MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- net/wanrouter/wanmain.c | 26 -------------------------- 1 file changed, 26 deletions(-) diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c index b210a88d0960..de4cc975b462 100644 --- a/net/wanrouter/wanmain.c +++ b/net/wanrouter/wanmain.c @@ -567,9 +567,6 @@ static int wanrouter_device_new_if(struct wan_device *wandev, { wanif_conf_t *cnf; struct net_device *dev = NULL; -#ifdef CONFIG_WANPIPE_MULTPPP - struct ppp_device *pppdev=NULL; -#endif int err; if ((wandev->state == WAN_UNCONFIGURED) || (wandev->new_if == NULL)) @@ -588,25 +585,10 @@ static int wanrouter_device_new_if(struct wan_device *wandev, goto out; if (cnf->config_id == WANCONFIG_MPPP) { -#ifdef CONFIG_WANPIPE_MULTPPP - pppdev = kzalloc(sizeof(struct ppp_device), GFP_KERNEL); - err = -ENOBUFS; - if (pppdev == NULL) - goto out; - pppdev->dev = kzalloc(sizeof(struct net_device), GFP_KERNEL); - if (pppdev->dev == NULL) { - kfree(pppdev); - err = -ENOBUFS; - goto out; - } - err = wandev->new_if(wandev, (struct net_device *)pppdev, cnf); - dev = pppdev->dev; -#else printk(KERN_INFO "%s: Wanpipe Mulit-Port PPP support has not been compiled in!\n", wandev->name); err = -EPROTONOSUPPORT; goto out; -#endif } else { dev = kzalloc(sizeof(struct net_device), GFP_KERNEL); err = -ENOBUFS; @@ -661,17 +643,9 @@ static int wanrouter_device_new_if(struct wan_device *wandev, kfree(dev->priv); dev->priv = NULL; -#ifdef CONFIG_WANPIPE_MULTPPP - if (cnf->config_id == WANCONFIG_MPPP) - kfree(pppdev); - else - kfree(dev); -#else /* Sync PPP is disabled */ if (cnf->config_id != WANCONFIG_MPPP) kfree(dev); -#endif - out: kfree(cnf); return err; -- cgit v1.2.3 From a8817d2f6d59b0caeacf6071f56a83164b474a32 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Tue, 1 Jul 2008 20:24:10 +0200 Subject: wanmain.c doesn't need syncppp.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- net/wanrouter/wanmain.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c index de4cc975b462..7f07152bc109 100644 --- a/net/wanrouter/wanmain.c +++ b/net/wanrouter/wanmain.c @@ -57,7 +57,6 @@ #include /* vmalloc, vfree */ #include /* copy_to/from_user */ #include /* __initfunc et al. */ -#include #define KMEM_SAFETYZONE 8 -- cgit v1.2.3 From c1a0f0cdf95569c06946eed81c2fc7e04b272db4 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Tue, 1 Jul 2008 20:35:06 +0200 Subject: WAN: Remove unneeded "#include " MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/dscc4.c | 1 - drivers/net/wan/lmc/lmc_media.c | 2 -- drivers/net/wan/pc300_drv.c | 2 -- 3 files changed, 5 deletions(-) diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index 50ef5b4efd6d..f5d55ad02267 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -103,7 +103,6 @@ #include #include #include -#include #include #include diff --git a/drivers/net/wan/lmc/lmc_media.c b/drivers/net/wan/lmc/lmc_media.c index 8aa461c941ce..1cc5834ebbc2 100644 --- a/drivers/net/wan/lmc/lmc_media.c +++ b/drivers/net/wan/lmc/lmc_media.c @@ -16,8 +16,6 @@ #include #include -#include - #include /* Processor type for cache alignment. */ #include #include diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index 334170527755..694df44d2e4f 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -227,8 +227,6 @@ static char rcsid[] = #include #include #include - -#include #include #include -- cgit v1.2.3 From ea966165a306ad4243b7bf62c848288c4286a8b7 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Tue, 1 Jul 2008 21:14:43 +0200 Subject: WAN: Remove dead code from PC300 driver, part #1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/pc300.h | 36 +----------------------------------- drivers/net/wan/pc300_drv.c | 18 +++--------------- 2 files changed, 4 insertions(+), 50 deletions(-) diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h index 63e9fcf31fb8..cd24ea586dba 100644 --- a/drivers/net/wan/pc300.h +++ b/drivers/net/wan/pc300.h @@ -100,7 +100,6 @@ #define _PC300_H #include -#include #include "hd64572.h" #include "pc300-falc-lh.h" @@ -112,19 +111,11 @@ typedef __u16 ucshort; /* 16 bits, unsigned */ typedef __u8 ucchar; /* 8 bits, unsigned */ #endif /* CY_TYPES */ -#define PC300_PROTO_MLPPP 1 +#define PC300_PROTO_MLPPP 1 -#define PC300_KERNEL "2.4.x" /* Kernel supported by this driver */ - -#define PC300_DEVNAME "hdlc" /* Dev. name base (for hdlc0, hdlc1, etc.) */ -#define PC300_MAXINDEX 100 /* Max dev. name index (the '0' in hdlc0) */ - -#define PC300_MAXCARDS 4 /* Max number of cards per system */ #define PC300_MAXCHAN 2 /* Number of channels per card */ -#define PC300_PLX_WIN 0x80 /* PLX control window size (128b) */ #define PC300_RAMSIZE 0x40000 /* RAM window size (256Kb) */ -#define PC300_SCASIZE 0x400 /* SCA window size (1Kb) */ #define PC300_FALCSIZE 0x400 /* FALC window size (1Kb) */ #define PC300_OSC_CLOCK 24576000 @@ -160,7 +151,6 @@ typedef __u8 ucchar; /* 8 bits, unsigned */ * Memory access functions/macros * * (required to support Alpha systems) * ***************************************/ -#ifdef __KERNEL__ #define cpc_writeb(port,val) {writeb((ucchar)(val),(port)); mb();} #define cpc_writew(port,val) {writew((ushort)(val),(port)); mb();} #define cpc_writel(port,val) {writel((uclong)(val),(port)); mb();} @@ -169,17 +159,6 @@ typedef __u8 ucchar; /* 8 bits, unsigned */ #define cpc_readw(port) readw(port) #define cpc_readl(port) readl(port) -#else /* __KERNEL__ */ -#define cpc_writeb(port,val) (*(volatile ucchar *)(port) = (ucchar)(val)) -#define cpc_writew(port,val) (*(volatile ucshort *)(port) = (ucshort)(val)) -#define cpc_writel(port,val) (*(volatile uclong *)(port) = (uclong)(val)) - -#define cpc_readb(port) (*(volatile ucchar *)(port)) -#define cpc_readw(port) (*(volatile ucshort *)(port)) -#define cpc_readl(port) (*(volatile uclong *)(port)) - -#endif /* __KERNEL__ */ - /****** Data Structures *****************************************************/ /* @@ -321,24 +300,15 @@ typedef struct pc300patterntst { } pc300patterntst_t; typedef struct pc300dev { - void *if_ptr; /* General purpose pointer */ struct pc300ch *chan; ucchar trace_on; uclong line_on; /* DCD(X.21, RSV) / sync(TE) change counters */ uclong line_off; -#ifdef __KERNEL__ char name[16]; struct net_device *dev; - - void *private; - struct sk_buff *tx_skb; - union { /* This union has all the protocol-specific structures */ - struct ppp_device pppdev; - }ifu; #ifdef CONFIG_PC300_MLPPP void *cpc_tty; /* information to PC300 TTY driver */ #endif -#endif /* __KERNEL__ */ }pc300dev_t; typedef struct pc300hw { @@ -401,9 +371,7 @@ typedef struct pc300ch { typedef struct pc300 { pc300hw_t hw; /* hardware config. */ pc300ch_t chan[PC300_MAXCHAN]; -#ifdef __KERNEL__ spinlock_t card_lock; -#endif /* __KERNEL__ */ } pc300_t; typedef struct pc300conf { @@ -471,12 +439,10 @@ enum pc300_loopback_cmds { #define PC300_TX_QUEUE_LEN 100 #define PC300_DEF_MTU 1600 -#ifdef __KERNEL__ /* Function Prototypes */ void tx_dma_start(pc300_t *, int); int cpc_open(struct net_device *dev); int cpc_set_media(hdlc_device *, int); -#endif /* __KERNEL__ */ #endif /* _PC300_H */ diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index 694df44d2e4f..3226a745571a 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -3150,19 +3150,10 @@ int cpc_open(struct net_device *dev) printk("pc300: cpc_open"); #endif -#ifdef FIXME - if (hdlc->proto.id == IF_PROTO_PPP) { - d->if_ptr = &hdlc->state.ppp.pppdev; - } -#endif - result = hdlc_open(dev); - if (/* FIXME hdlc->proto.id == IF_PROTO_PPP*/ 0) { - dev->priv = d; - } - if (result) { + + if (result) return result; - } sprintf(ifr.ifr_name, "%s", dev->name); result = cpc_opench(d); @@ -3195,9 +3186,7 @@ static int cpc_close(struct net_device *dev) CPC_UNLOCK(card, flags); hdlc_close(dev); - if (/* FIXME hdlc->proto.id == IF_PROTO_PPP*/ 0) { - d->if_ptr = NULL; - } + #ifdef CONFIG_PC300_MLPPP if (chan->conf.proto == PC300_PROTO_MLPPP) { cpc_tty_unregister_service(d); @@ -3358,7 +3347,6 @@ static void cpc_init_card(pc300_t * card) chan->nfree_tx_bd = N_DMA_TX_BUF; d->chan = chan; - d->tx_skb = NULL; d->trace_on = 0; d->line_on = 0; d->line_off = 0; -- cgit v1.2.3 From c36936ce4bc6d2a0d6520bd798e85abbb139c2aa Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Tue, 1 Jul 2008 21:24:14 +0200 Subject: WAN: Remove dead code from PC300 driver, part #2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/pc300.h | 8 -------- drivers/net/wan/pc300_drv.c | 6 +----- 2 files changed, 1 insertion(+), 13 deletions(-) diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h index cd24ea586dba..cee799dabd97 100644 --- a/drivers/net/wan/pc300.h +++ b/drivers/net/wan/pc300.h @@ -103,13 +103,9 @@ #include "hd64572.h" #include "pc300-falc-lh.h" -#ifndef CY_TYPES -#define CY_TYPES -typedef __u64 ucdouble; /* 64 bits, unsigned */ typedef __u32 uclong; /* 32 bits, unsigned */ typedef __u16 ucshort; /* 16 bits, unsigned */ typedef __u8 ucchar; /* 8 bits, unsigned */ -#endif /* CY_TYPES */ #define PC300_PROTO_MLPPP 1 @@ -345,7 +341,6 @@ typedef struct pc300chconf { raw_hdlc_proto proto_settings; /* Encoding, parity (CRC) */ uclong media; /* HW media (RS232, V.35, etc.) */ uclong proto; /* Protocol (PPP, X.25, etc.) */ - ucchar monitor; /* Monitor mode (0 = off, !0 = on) */ /* TE-specific parameters */ ucchar lcode; /* Line Code (AMI, B8ZS, etc.) */ @@ -440,9 +435,6 @@ enum pc300_loopback_cmds { #define PC300_DEF_MTU 1600 /* Function Prototypes */ -void tx_dma_start(pc300_t *, int); int cpc_open(struct net_device *dev); -int cpc_set_media(hdlc_device *, int); #endif /* _PC300_H */ - diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index 3226a745571a..65c40cd4a08f 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -1805,11 +1805,7 @@ static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev) int i; #endif - if (chan->conf.monitor) { - /* In monitor mode no Tx is done: ignore packet */ - dev_kfree_skb(skb); - return 0; - } else if (!netif_carrier_ok(dev)) { + if (!netif_carrier_ok(dev)) { /* DCD must be OFF: drop packet */ dev_kfree_skb(skb); dev->stats.tx_errors++; -- cgit v1.2.3 From b22267d3883ebc76093e9f36c4c738125e092402 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Tue, 1 Jul 2008 21:43:39 +0200 Subject: WAN: Convert PC300 driver to use normal u8/u16/u32 types MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/pc300.h | 184 ++++++++++++++++++++++---------------------- drivers/net/wan/pc300_drv.c | 120 ++++++++++++++--------------- 2 files changed, 150 insertions(+), 154 deletions(-) diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h index cee799dabd97..2e4f84f6cad4 100644 --- a/drivers/net/wan/pc300.h +++ b/drivers/net/wan/pc300.h @@ -103,10 +103,6 @@ #include "hd64572.h" #include "pc300-falc-lh.h" -typedef __u32 uclong; /* 32 bits, unsigned */ -typedef __u16 ucshort; /* 16 bits, unsigned */ -typedef __u8 ucchar; /* 8 bits, unsigned */ - #define PC300_PROTO_MLPPP 1 #define PC300_MAXCHAN 2 /* Number of channels per card */ @@ -147,9 +143,9 @@ typedef __u8 ucchar; /* 8 bits, unsigned */ * Memory access functions/macros * * (required to support Alpha systems) * ***************************************/ -#define cpc_writeb(port,val) {writeb((ucchar)(val),(port)); mb();} +#define cpc_writeb(port,val) {writeb((u8)(val),(port)); mb();} #define cpc_writew(port,val) {writew((ushort)(val),(port)); mb();} -#define cpc_writel(port,val) {writel((uclong)(val),(port)); mb();} +#define cpc_writel(port,val) {writel((u32)(val),(port)); mb();} #define cpc_readb(port) readb(port) #define cpc_readw(port) readw(port) @@ -163,15 +159,15 @@ typedef __u8 ucchar; /* 8 bits, unsigned */ * (memory mapped). */ struct RUNTIME_9050 { - uclong loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */ - uclong loc_rom_range; /* 10h : Local ROM Range */ - uclong loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */ - uclong loc_rom_base; /* 24h : Local ROM Base */ - uclong loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */ - uclong rom_bus_descr; /* 38h : ROM Bus Descriptor */ - uclong cs_base[4]; /* 3C-48h : Chip Select Base Addrs */ - uclong intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */ - uclong init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */ + u32 loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */ + u32 loc_rom_range; /* 10h : Local ROM Range */ + u32 loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */ + u32 loc_rom_base; /* 24h : Local ROM Base */ + u32 loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */ + u32 rom_bus_descr; /* 38h : ROM Bus Descriptor */ + u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */ + u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */ + u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */ }; #define PLX_9050_LINT1_ENABLE 0x01 @@ -215,66 +211,66 @@ struct RUNTIME_9050 { #define PC300_FALC_MAXLOOP 0x0000ffff /* for falc_issue_cmd() */ typedef struct falc { - ucchar sync; /* If true FALC is synchronized */ - ucchar active; /* if TRUE then already active */ - ucchar loop_active; /* if TRUE a line loopback UP was received */ - ucchar loop_gen; /* if TRUE a line loopback UP was issued */ + u8 sync; /* If true FALC is synchronized */ + u8 active; /* if TRUE then already active */ + u8 loop_active; /* if TRUE a line loopback UP was received */ + u8 loop_gen; /* if TRUE a line loopback UP was issued */ - ucchar num_channels; - ucchar offset; /* 1 for T1, 0 for E1 */ - ucchar full_bandwidth; + u8 num_channels; + u8 offset; /* 1 for T1, 0 for E1 */ + u8 full_bandwidth; - ucchar xmb_cause; - ucchar multiframe_mode; + u8 xmb_cause; + u8 multiframe_mode; /* Statistics */ - ucshort pden; /* Pulse Density violation count */ - ucshort los; /* Loss of Signal count */ - ucshort losr; /* Loss of Signal recovery count */ - ucshort lfa; /* Loss of frame alignment count */ - ucshort farec; /* Frame Alignment Recovery count */ - ucshort lmfa; /* Loss of multiframe alignment count */ - ucshort ais; /* Remote Alarm indication Signal count */ - ucshort sec; /* One-second timer */ - ucshort es; /* Errored second */ - ucshort rai; /* remote alarm received */ - ucshort bec; - ucshort fec; - ucshort cvc; - ucshort cec; - ucshort ebc; + u16 pden; /* Pulse Density violation count */ + u16 los; /* Loss of Signal count */ + u16 losr; /* Loss of Signal recovery count */ + u16 lfa; /* Loss of frame alignment count */ + u16 farec; /* Frame Alignment Recovery count */ + u16 lmfa; /* Loss of multiframe alignment count */ + u16 ais; /* Remote Alarm indication Signal count */ + u16 sec; /* One-second timer */ + u16 es; /* Errored second */ + u16 rai; /* remote alarm received */ + u16 bec; + u16 fec; + u16 cvc; + u16 cec; + u16 ebc; /* Status */ - ucchar red_alarm; - ucchar blue_alarm; - ucchar loss_fa; - ucchar yellow_alarm; - ucchar loss_mfa; - ucchar prbs; + u8 red_alarm; + u8 blue_alarm; + u8 loss_fa; + u8 yellow_alarm; + u8 loss_mfa; + u8 prbs; } falc_t; typedef struct falc_status { - ucchar sync; /* If true FALC is synchronized */ - ucchar red_alarm; - ucchar blue_alarm; - ucchar loss_fa; - ucchar yellow_alarm; - ucchar loss_mfa; - ucchar prbs; + u8 sync; /* If true FALC is synchronized */ + u8 red_alarm; + u8 blue_alarm; + u8 loss_fa; + u8 yellow_alarm; + u8 loss_mfa; + u8 prbs; } falc_status_t; typedef struct rsv_x21_status { - ucchar dcd; - ucchar dsr; - ucchar cts; - ucchar rts; - ucchar dtr; + u8 dcd; + u8 dsr; + u8 cts; + u8 rts; + u8 dtr; } rsv_x21_status_t; typedef struct pc300stats { int hw_type; - uclong line_on; - uclong line_off; + u32 line_on; + u32 line_off; struct net_device_stats gen_stats; falc_t te_stats; } pc300stats_t; @@ -292,14 +288,14 @@ typedef struct pc300loopback { typedef struct pc300patterntst { char patrntst_on; /* 0 - off; 1 - on; 2 - read num_errors */ - ucshort num_errors; + u16 num_errors; } pc300patterntst_t; typedef struct pc300dev { struct pc300ch *chan; - ucchar trace_on; - uclong line_on; /* DCD(X.21, RSV) / sync(TE) change counters */ - uclong line_off; + u8 trace_on; + u32 line_on; /* DCD(X.21, RSV) / sync(TE) change counters */ + u32 line_off; char name[16]; struct net_device *dev; #ifdef CONFIG_PC300_MLPPP @@ -312,42 +308,42 @@ typedef struct pc300hw { int bus; /* Bus (PCI, PMC, etc.) */ int nchan; /* number of channels */ int irq; /* interrupt request level */ - uclong clock; /* Board clock */ - ucchar cpld_id; /* CPLD ID (TE only) */ - ucshort cpld_reg1; /* CPLD reg 1 (TE only) */ - ucshort cpld_reg2; /* CPLD reg 2 (TE only) */ - ucshort gpioc_reg; /* PLX GPIOC reg */ - ucshort intctl_reg; /* PLX Int Ctrl/Status reg */ - uclong iophys; /* PLX registers I/O base */ - uclong iosize; /* PLX registers I/O size */ - uclong plxphys; /* PLX registers MMIO base (physical) */ + u32 clock; /* Board clock */ + u8 cpld_id; /* CPLD ID (TE only) */ + u16 cpld_reg1; /* CPLD reg 1 (TE only) */ + u16 cpld_reg2; /* CPLD reg 2 (TE only) */ + u16 gpioc_reg; /* PLX GPIOC reg */ + u16 intctl_reg; /* PLX Int Ctrl/Status reg */ + u32 iophys; /* PLX registers I/O base */ + u32 iosize; /* PLX registers I/O size */ + u32 plxphys; /* PLX registers MMIO base (physical) */ void __iomem * plxbase; /* PLX registers MMIO base (virtual) */ - uclong plxsize; /* PLX registers MMIO size */ - uclong scaphys; /* SCA registers MMIO base (physical) */ + u32 plxsize; /* PLX registers MMIO size */ + u32 scaphys; /* SCA registers MMIO base (physical) */ void __iomem * scabase; /* SCA registers MMIO base (virtual) */ - uclong scasize; /* SCA registers MMIO size */ - uclong ramphys; /* On-board RAM MMIO base (physical) */ + u32 scasize; /* SCA registers MMIO size */ + u32 ramphys; /* On-board RAM MMIO base (physical) */ void __iomem * rambase; /* On-board RAM MMIO base (virtual) */ - uclong alloc_ramsize; /* RAM MMIO size allocated by the PCI bridge */ - uclong ramsize; /* On-board RAM MMIO size */ - uclong falcphys; /* FALC registers MMIO base (physical) */ + u32 alloc_ramsize; /* RAM MMIO size allocated by the PCI bridge */ + u32 ramsize; /* On-board RAM MMIO size */ + u32 falcphys; /* FALC registers MMIO base (physical) */ void __iomem * falcbase;/* FALC registers MMIO base (virtual) */ - uclong falcsize; /* FALC registers MMIO size */ + u32 falcsize; /* FALC registers MMIO size */ } pc300hw_t; typedef struct pc300chconf { - sync_serial_settings phys_settings; /* Clock type/rate (in bps), + sync_serial_settings phys_settings; /* Clock type/rate (in bps), loopback mode */ raw_hdlc_proto proto_settings; /* Encoding, parity (CRC) */ - uclong media; /* HW media (RS232, V.35, etc.) */ - uclong proto; /* Protocol (PPP, X.25, etc.) */ + u32 media; /* HW media (RS232, V.35, etc.) */ + u32 proto; /* Protocol (PPP, X.25, etc.) */ /* TE-specific parameters */ - ucchar lcode; /* Line Code (AMI, B8ZS, etc.) */ - ucchar fr_mode; /* Frame Mode (ESF, D4, etc.) */ - ucchar lbo; /* Line Build Out */ - ucchar rx_sens; /* Rx Sensitivity (long- or short-haul) */ - uclong tslot_bitmap; /* bit[i]=1 => timeslot _i_ is active */ + u8 lcode; /* Line Code (AMI, B8ZS, etc.) */ + u8 fr_mode; /* Frame Mode (ESF, D4, etc.) */ + u8 lbo; /* Line Build Out */ + u8 rx_sens; /* Rx Sensitivity (long- or short-haul) */ + u32 tslot_bitmap; /* bit[i]=1 => timeslot _i_ is active */ } pc300chconf_t; typedef struct pc300ch { @@ -355,12 +351,12 @@ typedef struct pc300ch { int channel; pc300dev_t d; pc300chconf_t conf; - ucchar tx_first_bd; /* First TX DMA block descr. w/ data */ - ucchar tx_next_bd; /* Next free TX DMA block descriptor */ - ucchar rx_first_bd; /* First free RX DMA block descriptor */ - ucchar rx_last_bd; /* Last free RX DMA block descriptor */ - ucchar nfree_tx_bd; /* Number of free TX DMA block descriptors */ - falc_t falc; /* FALC structure (TE only) */ + u8 tx_first_bd; /* First TX DMA block descr. w/ data */ + u8 tx_next_bd; /* Next free TX DMA block descriptor */ + u8 rx_first_bd; /* First free RX DMA block descriptor */ + u8 rx_last_bd; /* Last free RX DMA block descriptor */ + u8 nfree_tx_bd; /* Number of free TX DMA block descriptors */ + falc_t falc; /* FALC structure (TE only) */ } pc300ch_t; typedef struct pc300 { diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index 65c40cd4a08f..d0a8d1e352ac 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -283,8 +283,8 @@ static void rx_dma_buf_init(pc300_t *, int); static void tx_dma_buf_check(pc300_t *, int); static void rx_dma_buf_check(pc300_t *, int); static irqreturn_t cpc_intr(int, void *); -static int clock_rate_calc(uclong, uclong, int *); -static uclong detect_ram(pc300_t *); +static int clock_rate_calc(u32, u32, int *); +static u32 detect_ram(pc300_t *); static void plx_init(pc300_t *); static void cpc_trace(struct net_device *, struct sk_buff *, char); static int cpc_attach(struct net_device *, unsigned short, unsigned short); @@ -309,10 +309,10 @@ static void tx_dma_buf_pt_init(pc300_t * card, int ch) + DMA_TX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); for (i = 0; i < N_DMA_TX_BUF; i++, ptdescr++) { - cpc_writel(&ptdescr->next, (uclong) (DMA_TX_BD_BASE + + cpc_writel(&ptdescr->next, (u32)(DMA_TX_BD_BASE + (ch_factor + ((i + 1) & (N_DMA_TX_BUF - 1))) * sizeof(pcsca_bd_t))); - cpc_writel(&ptdescr->ptbuf, - (uclong) (DMA_TX_BASE + (ch_factor + i) * BD_DEF_LEN)); + cpc_writel(&ptdescr->ptbuf, + (u32)(DMA_TX_BASE + (ch_factor + i) * BD_DEF_LEN)); } } @@ -339,10 +339,10 @@ static void rx_dma_buf_pt_init(pc300_t * card, int ch) + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); for (i = 0; i < N_DMA_RX_BUF; i++, ptdescr++) { - cpc_writel(&ptdescr->next, (uclong) (DMA_RX_BD_BASE + - (ch_factor + ((i + 1) & (N_DMA_RX_BUF - 1))) * sizeof(pcsca_bd_t))); + cpc_writel(&ptdescr->next, (u32)(DMA_RX_BD_BASE + + (ch_factor + ((i + 1) & (N_DMA_RX_BUF - 1))) * sizeof(pcsca_bd_t))); cpc_writel(&ptdescr->ptbuf, - (uclong) (DMA_RX_BASE + (ch_factor + i) * BD_DEF_LEN)); + (u32)(DMA_RX_BASE + (ch_factor + i) * BD_DEF_LEN)); } } @@ -365,8 +365,8 @@ static void tx_dma_buf_check(pc300_t * card, int ch) { volatile pcsca_bd_t __iomem *ptdescr; int i; - ucshort first_bd = card->chan[ch].tx_first_bd; - ucshort next_bd = card->chan[ch].tx_next_bd; + u16 first_bd = card->chan[ch].tx_first_bd; + u16 next_bd = card->chan[ch].tx_next_bd; printk("#CH%d: f_bd = %d(0x%08zx), n_bd = %d(0x%08zx)\n", ch, first_bd, TX_BD_ADDR(ch, first_bd), @@ -390,9 +390,9 @@ static void tx1_dma_buf_check(pc300_t * card, int ch) { volatile pcsca_bd_t __iomem *ptdescr; int i; - ucshort first_bd = card->chan[ch].tx_first_bd; - ucshort next_bd = card->chan[ch].tx_next_bd; - uclong scabase = card->hw.scabase; + u16 first_bd = card->chan[ch].tx_first_bd; + u16 next_bd = card->chan[ch].tx_next_bd; + u32 scabase = card->hw.scabase; printk ("\nnfree_tx_bd = %d \n", card->chan[ch].nfree_tx_bd); printk("#CH%d: f_bd = %d(0x%08x), n_bd = %d(0x%08x)\n", ch, @@ -411,13 +411,13 @@ static void tx1_dma_buf_check(pc300_t * card, int ch) printk("\n"); } #endif - + static void rx_dma_buf_check(pc300_t * card, int ch) { volatile pcsca_bd_t __iomem *ptdescr; int i; - ucshort first_bd = card->chan[ch].rx_first_bd; - ucshort last_bd = card->chan[ch].rx_last_bd; + u16 first_bd = card->chan[ch].rx_first_bd; + u16 last_bd = card->chan[ch].rx_last_bd; int ch_factor; ch_factor = ch * N_DMA_RX_BUF; @@ -438,9 +438,9 @@ static void rx_dma_buf_check(pc300_t * card, int ch) static int dma_get_rx_frame_size(pc300_t * card, int ch) { volatile pcsca_bd_t __iomem *ptdescr; - ucshort first_bd = card->chan[ch].rx_first_bd; + u16 first_bd = card->chan[ch].rx_first_bd; int rcvd = 0; - volatile ucchar status; + volatile u8 status; ptdescr = (card->hw.rambase + RX_BD_ADDR(ch, first_bd)); while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) { @@ -460,12 +460,12 @@ static int dma_get_rx_frame_size(pc300_t * card, int ch) * dma_buf_write: writes a frame to the Tx DMA buffers * NOTE: this function writes one frame at a time. */ -static int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len) +static int dma_buf_write(pc300_t *card, int ch, u8 *ptdata, int len) { int i, nchar; volatile pcsca_bd_t __iomem *ptdescr; int tosend = len; - ucchar nbuf = ((len - 1) / BD_DEF_LEN) + 1; + u8 nbuf = ((len - 1) / BD_DEF_LEN) + 1; if (nbuf >= card->chan[ch].nfree_tx_bd) { return -ENOMEM; @@ -507,7 +507,7 @@ static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb) pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; volatile pcsca_bd_t __iomem *ptdescr; int rcvd = 0; - volatile ucchar status; + volatile u8 status; ptdescr = (card->hw.rambase + RX_BD_ADDR(ch, chan->rx_first_bd)); @@ -561,8 +561,8 @@ static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb) static void tx_dma_stop(pc300_t * card, int ch) { void __iomem *scabase = card->hw.scabase; - ucchar drr_ena_bit = 1 << (5 + 2 * ch); - ucchar drr_rst_bit = 1 << (1 + 2 * ch); + u8 drr_ena_bit = 1 << (5 + 2 * ch); + u8 drr_rst_bit = 1 << (1 + 2 * ch); /* Disable DMA */ cpc_writeb(scabase + DRR, drr_ena_bit); @@ -572,8 +572,8 @@ static void tx_dma_stop(pc300_t * card, int ch) static void rx_dma_stop(pc300_t * card, int ch) { void __iomem *scabase = card->hw.scabase; - ucchar drr_ena_bit = 1 << (4 + 2 * ch); - ucchar drr_rst_bit = 1 << (2 * ch); + u8 drr_ena_bit = 1 << (4 + 2 * ch); + u8 drr_rst_bit = 1 << (2 * ch); /* Disable DMA */ cpc_writeb(scabase + DRR, drr_ena_bit); @@ -605,7 +605,7 @@ static void rx_dma_start(pc300_t * card, int ch) /*************************/ /*** FALC Routines ***/ /*************************/ -static void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd) +static void falc_issue_cmd(pc300_t *card, int ch, u8 cmd) { void __iomem *falcbase = card->hw.falcbase; unsigned long i = 0; @@ -673,7 +673,7 @@ static void falc_intr_enable(pc300_t * card, int ch) static void falc_open_timeslot(pc300_t * card, int ch, int timeslot) { void __iomem *falcbase = card->hw.falcbase; - ucchar tshf = card->chan[ch].falc.offset; + u8 tshf = card->chan[ch].falc.offset; cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch), cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) & @@ -689,7 +689,7 @@ static void falc_open_timeslot(pc300_t * card, int ch, int timeslot) static void falc_close_timeslot(pc300_t * card, int ch, int timeslot) { void __iomem *falcbase = card->hw.falcbase; - ucchar tshf = card->chan[ch].falc.offset; + u8 tshf = card->chan[ch].falc.offset; cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch), cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) | @@ -810,7 +810,7 @@ static void falc_init_t1(pc300_t * card, int ch) pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; falc_t *pfalc = (falc_t *) & chan->falc; void __iomem *falcbase = card->hw.falcbase; - ucchar dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0); + u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0); /* Switch to T1 mode (PCM 24) */ cpc_writeb(falcbase + F_REG(FMR1, ch), FMR1_PMOD); @@ -979,7 +979,7 @@ static void falc_init_e1(pc300_t * card, int ch) pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; falc_t *pfalc = (falc_t *) & chan->falc; void __iomem *falcbase = card->hw.falcbase; - ucchar dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0); + u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0); /* Switch to E1 mode (PCM 30) */ cpc_writeb(falcbase + F_REG(FMR1, ch), @@ -1185,7 +1185,7 @@ static void te_config(pc300_t * card, int ch) pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; falc_t *pfalc = (falc_t *) & chan->falc; void __iomem *falcbase = card->hw.falcbase; - ucchar dummy; + u8 dummy; unsigned long flags; memset(pfalc, 0, sizeof(falc_t)); @@ -1401,7 +1401,7 @@ static void falc_update_stats(pc300_t * card, int ch) pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; falc_t *pfalc = (falc_t *) & chan->falc; void __iomem *falcbase = card->hw.falcbase; - ucshort counter; + u16 counter; counter = cpc_readb(falcbase + F_REG(FECL, ch)); counter |= cpc_readb(falcbase + F_REG(FECH, ch)) << 8; @@ -1727,7 +1727,7 @@ static void falc_pattern_test(pc300_t * card, int ch, unsigned int activate) * Description: This routine returns the bit error counter value *---------------------------------------------------------------------------- */ -static ucshort falc_pattern_test_error(pc300_t * card, int ch) +static u16 falc_pattern_test_error(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -1774,7 +1774,7 @@ static void cpc_tx_timeout(struct net_device *dev) pc300_t *card = (pc300_t *) chan->card; int ch = chan->channel; unsigned long flags; - ucchar ilar; + u8 ilar; dev->stats.tx_errors++; dev->stats.tx_aborted_errors++; @@ -1830,7 +1830,7 @@ static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev) } /* Write buffer to DMA buffers */ - if (dma_buf_write(card, ch, (ucchar *) skb->data, skb->len) != 0) { + if (dma_buf_write(card, ch, (u8 *)skb->data, skb->len) != 0) { // printk("%s: write error. Dropping TX packet.\n", dev->name); netif_stop_queue(dev); dev_kfree_skb(skb); @@ -1995,7 +1995,7 @@ static void sca_tx_intr(pc300dev_t *dev) static void sca_intr(pc300_t * card) { void __iomem *scabase = card->hw.scabase; - volatile uclong status; + volatile u32 status; int ch; int intr_count = 0; unsigned char dsr_rx; @@ -2010,7 +2010,7 @@ static void sca_intr(pc300_t * card) /**** Reception ****/ if (status & IR0_DRX((IR0_DMIA | IR0_DMIB), ch)) { - ucchar drx_stat = cpc_readb(scabase + DSR_RX(ch)); + u8 drx_stat = cpc_readb(scabase + DSR_RX(ch)); /* Clear RX interrupts */ cpc_writeb(scabase + DSR_RX(ch), drx_stat | DSR_DWE); @@ -2084,7 +2084,7 @@ static void sca_intr(pc300_t * card) /**** Transmission ****/ if (status & IR0_DTX((IR0_EFT | IR0_DMIA | IR0_DMIB), ch)) { - ucchar dtx_stat = cpc_readb(scabase + DSR_TX(ch)); + u8 dtx_stat = cpc_readb(scabase + DSR_TX(ch)); /* Clear TX interrupts */ cpc_writeb(scabase + DSR_TX(ch), dtx_stat | DSR_DWE); @@ -2128,7 +2128,7 @@ static void sca_intr(pc300_t * card) /**** MSCI ****/ if (status & IR0_M(IR0_RXINTA, ch)) { - ucchar st1 = cpc_readb(scabase + M_REG(ST1, ch)); + u8 st1 = cpc_readb(scabase + M_REG(ST1, ch)); /* Clear MSCI interrupts */ cpc_writeb(scabase + M_REG(ST1, ch), st1); @@ -2170,7 +2170,7 @@ static void sca_intr(pc300_t * card) } } -static void falc_t1_loop_detection(pc300_t * card, int ch, ucchar frs1) +static void falc_t1_loop_detection(pc300_t *card, int ch, u8 frs1) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -2195,7 +2195,7 @@ static void falc_t1_loop_detection(pc300_t * card, int ch, ucchar frs1) } } -static void falc_e1_loop_detection(pc300_t * card, int ch, ucchar rsp) +static void falc_e1_loop_detection(pc300_t *card, int ch, u8 rsp) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -2225,8 +2225,8 @@ static void falc_t1_intr(pc300_t * card, int ch) pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; void __iomem *falcbase = card->hw.falcbase; - ucchar isr0, isr3, gis; - ucchar dummy; + u8 isr0, isr3, gis; + u8 dummy; while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) { if (gis & GIS_ISR0) { @@ -2272,8 +2272,8 @@ static void falc_e1_intr(pc300_t * card, int ch) pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; void __iomem *falcbase = card->hw.falcbase; - ucchar isr1, isr2, isr3, gis, rsp; - ucchar dummy; + u8 isr1, isr2, isr3, gis, rsp; + u8 dummy; while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) { rsp = cpc_readb(falcbase + F_REG(RSP, ch)); @@ -2355,7 +2355,7 @@ static void falc_intr(pc300_t * card) static irqreturn_t cpc_intr(int irq, void *dev_id) { pc300_t *card = dev_id; - volatile ucchar plx_status; + volatile u8 plx_status; if (!card) { #ifdef PC300_DEBUG_INTR @@ -2394,7 +2394,7 @@ static irqreturn_t cpc_intr(int irq, void *dev_id) static void cpc_sca_status(pc300_t * card, int ch) { - ucchar ilar; + u8 ilar; void __iomem *scabase = card->hw.scabase; unsigned long flags; @@ -2812,7 +2812,7 @@ static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) } } -static int clock_rate_calc(uclong rate, uclong clock, int *br_io) +static int clock_rate_calc(u32 rate, u32 clock, int *br_io) { int br, tc; int br_pwr, error; @@ -2849,12 +2849,12 @@ static int ch_config(pc300dev_t * d) void __iomem *scabase = card->hw.scabase; void __iomem *plxbase = card->hw.plxbase; int ch = chan->channel; - uclong clkrate = chan->conf.phys_settings.clock_rate; - uclong clktype = chan->conf.phys_settings.clock_type; - ucshort encoding = chan->conf.proto_settings.encoding; - ucshort parity = chan->conf.proto_settings.parity; - ucchar md0, md2; - + u32 clkrate = chan->conf.phys_settings.clock_rate; + u32 clktype = chan->conf.phys_settings.clock_type; + u16 encoding = chan->conf.proto_settings.encoding; + u16 parity = chan->conf.proto_settings.parity; + u8 md0, md2; + /* Reset the channel */ cpc_writeb(scabase + M_REG(CMD, ch), CMD_CH_RST); @@ -3193,16 +3193,16 @@ static int cpc_close(struct net_device *dev) return 0; } -static uclong detect_ram(pc300_t * card) +static u32 detect_ram(pc300_t * card) { - uclong i; - ucchar data; + u32 i; + u8 data; void __iomem *rambase = card->hw.rambase; card->hw.ramsize = PC300_RAMSIZE; /* Let's find out how much RAM is present on this board */ for (i = 0; i < card->hw.ramsize; i++) { - data = (ucchar) (i & 0xff); + data = (u8)(i & 0xff); cpc_writeb(rambase + i, data); if (cpc_readb(rambase + i) != data) { break; @@ -3279,7 +3279,7 @@ static void cpc_init_card(pc300_t * card) cpc_writeb(card->hw.scabase + DMER, 0x80); if (card->hw.type == PC300_TE) { - ucchar reg1; + u8 reg1; /* Check CPLD version */ reg1 = cpc_readb(card->hw.falcbase + CPLD_REG1); @@ -3413,7 +3413,7 @@ cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int first_time = 1; int err, eeprom_outdated = 0; - ucshort device_id; + u16 device_id; pc300_t *card; if (first_time) { -- cgit v1.2.3 From 0bee8db8f63b099412fdbce5b55b01d9f177951d Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Tue, 1 Jul 2008 22:04:01 +0200 Subject: WAN: farsync driver no longer uses syncppp.c directly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/Makefile | 2 +- drivers/net/wan/farsync.c | 5 +---- drivers/net/wan/farsync.h | 6 ------ 3 files changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index d61fef36afc9..94c1d474e306 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -24,7 +24,7 @@ pc300-objs := $(pc300-y) obj-$(CONFIG_HOSTESS_SV11) += z85230.o syncppp.o hostess_sv11.o obj-$(CONFIG_SEALEVEL_4021) += z85230.o syncppp.o sealevel.o obj-$(CONFIG_COSA) += syncppp.o cosa.o -obj-$(CONFIG_FARSYNC) += syncppp.o farsync.o +obj-$(CONFIG_FARSYNC) += farsync.o obj-$(CONFIG_DSCC4) += dscc4.o obj-$(CONFIG_LANMEDIA) += syncppp.o obj-$(CONFIG_X25_ASY) += x25_asy.o diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index 754f00809e3e..9557ad078ab8 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -47,10 +47,7 @@ MODULE_LICENSE("GPL"); /* Default parameters for the link */ #define FST_TX_QUEUE_LEN 100 /* At 8Mbps a longer queue length is - * useful, the syncppp module forces - * this down assuming a slower line I - * guess. - */ + * useful */ #define FST_TXQ_DEPTH 16 /* This one is for the buffering * of frames on the way down to the card * so that we can keep the card busy diff --git a/drivers/net/wan/farsync.h b/drivers/net/wan/farsync.h index d871dafa87a1..6b27e7c3d449 100644 --- a/drivers/net/wan/farsync.h +++ b/drivers/net/wan/farsync.h @@ -54,9 +54,6 @@ /* Ioctl call command values - * - * The first three private ioctls are used by the sync-PPP module, - * allowing a little room for expansion we start our numbering at 10. */ #define FSTWRITE (SIOCDEVPRIVATE+10) #define FSTCPURESET (SIOCDEVPRIVATE+11) @@ -202,9 +199,6 @@ struct fstioc_info { #define J1 7 /* "proto" */ -#define FST_HDLC 1 /* Cisco compatible HDLC */ -#define FST_PPP 2 /* Sync PPP */ -#define FST_MONITOR 3 /* Monitor only (raw packet reception) */ #define FST_RAW 4 /* Two way raw packets */ #define FST_GEN_HDLC 5 /* Using "Generic HDLC" module */ -- cgit v1.2.3 From aca257530f7d681b953961090ad729c32aa5ad62 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Tue, 1 Jul 2008 23:40:29 +0200 Subject: WAN: Port COSA driver to generic HDLC. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/Kconfig | 2 +- drivers/net/wan/Makefile | 2 +- drivers/net/wan/cosa.c | 293 +++++++++++++++++++++-------------------------- 3 files changed, 130 insertions(+), 167 deletions(-) diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 846be60e7821..e08cd4bf7f51 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -37,7 +37,7 @@ config HOSTESS_SV11 # The COSA/SRP driver has not been tested as non-modular yet. config COSA tristate "COSA/SRP sync serial boards support" - depends on ISA && m && ISA_DMA_API + depends on ISA && m && ISA_DMA_API && HDLC ---help--- Driver for COSA and SRP synchronous serial boards. diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index 94c1d474e306..9d085e0f0f44 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -23,7 +23,7 @@ pc300-objs := $(pc300-y) obj-$(CONFIG_HOSTESS_SV11) += z85230.o syncppp.o hostess_sv11.o obj-$(CONFIG_SEALEVEL_4021) += z85230.o syncppp.o sealevel.o -obj-$(CONFIG_COSA) += syncppp.o cosa.o +obj-$(CONFIG_COSA) += cosa.o obj-$(CONFIG_FARSYNC) += farsync.o obj-$(CONFIG_DSCC4) += dscc4.o obj-$(CONFIG_LANMEDIA) += syncppp.o diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 5827324e9d9f..e38b7acc52db 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -2,6 +2,7 @@ /* * Copyright (C) 1995-1997 Jan "Yenya" Kasprzak + * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -54,7 +55,7 @@ * * The Linux driver (unlike the present *BSD drivers :-) can work even * for the COSA and SRP in one computer and allows each channel to work - * in one of the three modes (character device, Cisco HDLC, Sync PPP). + * in one of the two modes (character or network device). * * AUTHOR * @@ -72,12 +73,6 @@ * The Comtrol Hostess SV11 driver by Alan Cox * The Sync PPP/Cisco HDLC layer (syncppp.c) ported to Linux by Alan Cox */ -/* - * 5/25/1999 : Marcelo Tosatti - * fixed a deadlock in cosa_sppp_open - */ - -/* ---------- Headers, macros, data structures ---------- */ #include #include @@ -86,6 +81,7 @@ #include #include #include +#include #include #include #include @@ -93,14 +89,12 @@ #include #include #include - -#undef COSA_SLOW_IO /* for testing purposes only */ - #include #include #include -#include +#undef COSA_SLOW_IO /* for testing purposes only */ + #include "cosa.h" /* Maximum length of the identification string. */ @@ -112,7 +106,6 @@ /* Per-channel data structure */ struct channel_data { - void *if_ptr; /* General purpose pointer (used by SPPP) */ int usage; /* Usage count; >0 for chrdev, -1 for netdev */ int num; /* Number of the channel */ struct cosa_data *cosa; /* Pointer to the per-card structure */ @@ -136,10 +129,9 @@ struct channel_data { wait_queue_head_t txwaitq, rxwaitq; int tx_status, rx_status; - /* SPPP/HDLC device parts */ - struct ppp_device pppdev; + /* generic HDLC device parts */ + struct net_device *netdev; struct sk_buff *rx_skb, *tx_skb; - struct net_device_stats stats; }; /* cosa->firmware_status bits */ @@ -281,21 +273,19 @@ static int cosa_start_tx(struct channel_data *channel, char *buf, int size); static void cosa_kick(struct cosa_data *cosa); static int cosa_dma_able(struct channel_data *chan, char *buf, int data); -/* SPPP/HDLC stuff */ -static void sppp_channel_init(struct channel_data *chan); -static void sppp_channel_delete(struct channel_data *chan); -static int cosa_sppp_open(struct net_device *d); -static int cosa_sppp_close(struct net_device *d); -static void cosa_sppp_timeout(struct net_device *d); -static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *d); -static char *sppp_setup_rx(struct channel_data *channel, int size); -static int sppp_rx_done(struct channel_data *channel); -static int sppp_tx_done(struct channel_data *channel, int size); -static int cosa_sppp_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); -static struct net_device_stats *cosa_net_stats(struct net_device *dev); +/* Network device stuff */ +static int cosa_net_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity); +static int cosa_net_open(struct net_device *d); +static int cosa_net_close(struct net_device *d); +static void cosa_net_timeout(struct net_device *d); +static int cosa_net_tx(struct sk_buff *skb, struct net_device *d); +static char *cosa_net_setup_rx(struct channel_data *channel, int size); +static int cosa_net_rx_done(struct channel_data *channel); +static int cosa_net_tx_done(struct channel_data *channel, int size); +static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); /* Character device */ -static void chardev_channel_init(struct channel_data *chan); static char *chrdev_setup_rx(struct channel_data *channel, int size); static int chrdev_rx_done(struct channel_data *channel); static int chrdev_tx_done(struct channel_data *channel, int size); @@ -357,17 +347,17 @@ static void debug_status_in(struct cosa_data *cosa, int status); static void debug_status_out(struct cosa_data *cosa, int status); #endif - +static inline struct channel_data* dev_to_chan(struct net_device *dev) +{ + return (struct channel_data *)dev_to_hdlc(dev)->priv; +} + /* ---------- Initialization stuff ---------- */ static int __init cosa_init(void) { int i, err = 0; - printk(KERN_INFO "cosa v1.08 (c) 1997-2000 Jan Kasprzak \n"); -#ifdef CONFIG_SMP - printk(KERN_INFO "cosa: SMP found. Please mail any success/failure reports to the author.\n"); -#endif if (cosa_major > 0) { if (register_chrdev(cosa_major, "cosa", &cosa_fops)) { printk(KERN_WARNING "cosa: unable to get major %d\n", @@ -402,7 +392,7 @@ static int __init cosa_init(void) } err = 0; goto out; - + out_chrdev: unregister_chrdev(cosa_major, "cosa"); out: @@ -414,43 +404,29 @@ static void __exit cosa_exit(void) { struct cosa_data *cosa; int i; - printk(KERN_INFO "Unloading the cosa module\n"); - for (i=0; inchannels; i++) { + for (i = 0; i < cosa->nchannels; i++) { /* Chardev driver has no alloc'd per-channel data */ - sppp_channel_delete(cosa->chan+i); + unregister_hdlc_device(cosa->chan[i].netdev); + free_netdev(cosa->chan[i].netdev); } /* Clean up the per-card data */ kfree(cosa->chan); kfree(cosa->bouncebuf); free_irq(cosa->irq, cosa); free_dma(cosa->dma); - release_region(cosa->datareg,is_8bit(cosa)?2:4); + release_region(cosa->datareg, is_8bit(cosa) ? 2 : 4); } unregister_chrdev(cosa_major, "cosa"); } module_exit(cosa_exit); -/* - * This function should register all the net devices needed for the - * single channel. - */ -static __inline__ void channel_init(struct channel_data *chan) -{ - sprintf(chan->name, "cosa%dc%d", chan->cosa->num, chan->num); - - /* Initialize the chardev data structures */ - chardev_channel_init(chan); - - /* Register the sppp interface */ - sppp_channel_init(chan); -} - static int cosa_probe(int base, int irq, int dma) { struct cosa_data *cosa = cosa_cards+nr_cards; @@ -576,13 +552,43 @@ static int cosa_probe(int base, int irq, int dma) /* Initialize the per-channel data */ cosa->chan = kcalloc(cosa->nchannels, sizeof(struct channel_data), GFP_KERNEL); if (!cosa->chan) { - err = -ENOMEM; + err = -ENOMEM; goto err_out3; } - for (i=0; inchannels; i++) { - cosa->chan[i].cosa = cosa; - cosa->chan[i].num = i; - channel_init(cosa->chan+i); + + for (i = 0; i < cosa->nchannels; i++) { + struct channel_data *chan = &cosa->chan[i]; + + chan->cosa = cosa; + chan->num = i; + sprintf(chan->name, "cosa%dc%d", chan->cosa->num, i); + + /* Initialize the chardev data structures */ + mutex_init(&chan->rlock); + init_MUTEX(&chan->wsem); + + /* Register the network interface */ + if (!(chan->netdev = alloc_hdlcdev(chan))) { + printk(KERN_WARNING "%s: alloc_hdlcdev failed.\n", + chan->name); + goto err_hdlcdev; + } + dev_to_hdlc(chan->netdev)->attach = cosa_net_attach; + dev_to_hdlc(chan->netdev)->xmit = cosa_net_tx; + chan->netdev->open = cosa_net_open; + chan->netdev->stop = cosa_net_close; + chan->netdev->do_ioctl = cosa_net_ioctl; + chan->netdev->tx_timeout = cosa_net_timeout; + chan->netdev->watchdog_timeo = TX_TIMEOUT; + chan->netdev->base_addr = chan->cosa->datareg; + chan->netdev->irq = chan->cosa->irq; + chan->netdev->dma = chan->cosa->dma; + if (register_hdlc_device(chan->netdev)) { + printk(KERN_WARNING "%s: register_hdlc_device()" + " failed.\n", chan->netdev->name); + free_netdev(chan->netdev); + goto err_hdlcdev; + } } printk (KERN_INFO "cosa%d: %s (%s at 0x%x irq %d dma %d), %d channels\n", @@ -590,13 +596,20 @@ static int cosa_probe(int base, int irq, int dma) cosa->datareg, cosa->irq, cosa->dma, cosa->nchannels); return nr_cards++; + +err_hdlcdev: + while (i-- > 0) { + unregister_hdlc_device(cosa->chan[i].netdev); + free_netdev(cosa->chan[i].netdev); + } + kfree(cosa->chan); err_out3: kfree(cosa->bouncebuf); err_out2: free_dma(cosa->dma); err_out1: free_irq(cosa->irq, cosa); -err_out: +err_out: release_region(cosa->datareg,is_8bit(cosa)?2:4); printk(KERN_NOTICE "cosa%d: allocating resources failed\n", cosa->num); @@ -604,54 +617,19 @@ err_out: } -/*---------- SPPP/HDLC netdevice ---------- */ +/*---------- network device ---------- */ -static void cosa_setup(struct net_device *d) +static int cosa_net_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) { - d->open = cosa_sppp_open; - d->stop = cosa_sppp_close; - d->hard_start_xmit = cosa_sppp_tx; - d->do_ioctl = cosa_sppp_ioctl; - d->get_stats = cosa_net_stats; - d->tx_timeout = cosa_sppp_timeout; - d->watchdog_timeo = TX_TIMEOUT; -} - -static void sppp_channel_init(struct channel_data *chan) -{ - struct net_device *d; - chan->if_ptr = &chan->pppdev; - d = alloc_netdev(0, chan->name, cosa_setup); - if (!d) { - printk(KERN_WARNING "%s: alloc_netdev failed.\n", chan->name); - return; - } - chan->pppdev.dev = d; - d->base_addr = chan->cosa->datareg; - d->irq = chan->cosa->irq; - d->dma = chan->cosa->dma; - d->ml_priv = chan; - sppp_attach(&chan->pppdev); - if (register_netdev(d)) { - printk(KERN_WARNING "%s: register_netdev failed.\n", d->name); - sppp_detach(d); - free_netdev(d); - chan->pppdev.dev = NULL; - return; - } -} - -static void sppp_channel_delete(struct channel_data *chan) -{ - unregister_netdev(chan->pppdev.dev); - sppp_detach(chan->pppdev.dev); - free_netdev(chan->pppdev.dev); - chan->pppdev.dev = NULL; + if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT) + return 0; + return -EINVAL; } -static int cosa_sppp_open(struct net_device *d) +static int cosa_net_open(struct net_device *dev) { - struct channel_data *chan = d->ml_priv; + struct channel_data *chan = dev_to_chan(dev); int err; unsigned long flags; @@ -662,36 +640,35 @@ static int cosa_sppp_open(struct net_device *d) } spin_lock_irqsave(&chan->cosa->lock, flags); if (chan->usage != 0) { - printk(KERN_WARNING "%s: sppp_open called with usage count %d\n", - chan->name, chan->usage); + printk(KERN_WARNING "%s: cosa_net_open called with usage count" + " %d\n", chan->name, chan->usage); spin_unlock_irqrestore(&chan->cosa->lock, flags); return -EBUSY; } - chan->setup_rx = sppp_setup_rx; - chan->tx_done = sppp_tx_done; - chan->rx_done = sppp_rx_done; - chan->usage=-1; + chan->setup_rx = cosa_net_setup_rx; + chan->tx_done = cosa_net_tx_done; + chan->rx_done = cosa_net_rx_done; + chan->usage = -1; chan->cosa->usage++; spin_unlock_irqrestore(&chan->cosa->lock, flags); - err = sppp_open(d); + err = hdlc_open(dev); if (err) { spin_lock_irqsave(&chan->cosa->lock, flags); - chan->usage=0; + chan->usage = 0; chan->cosa->usage--; - spin_unlock_irqrestore(&chan->cosa->lock, flags); return err; } - netif_start_queue(d); + netif_start_queue(dev); cosa_enable_rx(chan); return 0; } -static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *dev) +static int cosa_net_tx(struct sk_buff *skb, struct net_device *dev) { - struct channel_data *chan = dev->ml_priv; + struct channel_data *chan = dev_to_chan(dev); netif_stop_queue(dev); @@ -700,16 +677,16 @@ static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *dev) return 0; } -static void cosa_sppp_timeout(struct net_device *dev) +static void cosa_net_timeout(struct net_device *dev) { - struct channel_data *chan = dev->ml_priv; + struct channel_data *chan = dev_to_chan(dev); if (test_bit(RXBIT, &chan->cosa->rxtx)) { - chan->stats.rx_errors++; - chan->stats.rx_missed_errors++; + chan->netdev->stats.rx_errors++; + chan->netdev->stats.rx_missed_errors++; } else { - chan->stats.tx_errors++; - chan->stats.tx_aborted_errors++; + chan->netdev->stats.tx_errors++; + chan->netdev->stats.tx_aborted_errors++; } cosa_kick(chan->cosa); if (chan->tx_skb) { @@ -719,13 +696,13 @@ static void cosa_sppp_timeout(struct net_device *dev) netif_wake_queue(dev); } -static int cosa_sppp_close(struct net_device *d) +static int cosa_net_close(struct net_device *dev) { - struct channel_data *chan = d->ml_priv; + struct channel_data *chan = dev_to_chan(dev); unsigned long flags; - netif_stop_queue(d); - sppp_close(d); + netif_stop_queue(dev); + hdlc_close(dev); cosa_disable_rx(chan); spin_lock_irqsave(&chan->cosa->lock, flags); if (chan->rx_skb) { @@ -736,13 +713,13 @@ static int cosa_sppp_close(struct net_device *d) kfree_skb(chan->tx_skb); chan->tx_skb = NULL; } - chan->usage=0; + chan->usage = 0; chan->cosa->usage--; spin_unlock_irqrestore(&chan->cosa->lock, flags); return 0; } -static char *sppp_setup_rx(struct channel_data *chan, int size) +static char *cosa_net_setup_rx(struct channel_data *chan, int size) { /* * We can safely fall back to non-dma-able memory, because we have @@ -754,66 +731,53 @@ static char *sppp_setup_rx(struct channel_data *chan, int size) if (chan->rx_skb == NULL) { printk(KERN_NOTICE "%s: Memory squeeze, dropping packet\n", chan->name); - chan->stats.rx_dropped++; + chan->netdev->stats.rx_dropped++; return NULL; } - chan->pppdev.dev->trans_start = jiffies; + chan->netdev->trans_start = jiffies; return skb_put(chan->rx_skb, size); } -static int sppp_rx_done(struct channel_data *chan) +static int cosa_net_rx_done(struct channel_data *chan) { if (!chan->rx_skb) { printk(KERN_WARNING "%s: rx_done with empty skb!\n", chan->name); - chan->stats.rx_errors++; - chan->stats.rx_frame_errors++; + chan->netdev->stats.rx_errors++; + chan->netdev->stats.rx_frame_errors++; return 0; } - chan->rx_skb->protocol = htons(ETH_P_WAN_PPP); - chan->rx_skb->dev = chan->pppdev.dev; + chan->rx_skb->protocol = hdlc_type_trans(chan->rx_skb, chan->netdev); + chan->rx_skb->dev = chan->netdev; skb_reset_mac_header(chan->rx_skb); - chan->stats.rx_packets++; - chan->stats.rx_bytes += chan->cosa->rxsize; + chan->netdev->stats.rx_packets++; + chan->netdev->stats.rx_bytes += chan->cosa->rxsize; netif_rx(chan->rx_skb); chan->rx_skb = NULL; - chan->pppdev.dev->last_rx = jiffies; + chan->netdev->last_rx = jiffies; return 0; } /* ARGSUSED */ -static int sppp_tx_done(struct channel_data *chan, int size) +static int cosa_net_tx_done(struct channel_data *chan, int size) { if (!chan->tx_skb) { printk(KERN_WARNING "%s: tx_done with empty skb!\n", chan->name); - chan->stats.tx_errors++; - chan->stats.tx_aborted_errors++; + chan->netdev->stats.tx_errors++; + chan->netdev->stats.tx_aborted_errors++; return 1; } dev_kfree_skb_irq(chan->tx_skb); chan->tx_skb = NULL; - chan->stats.tx_packets++; - chan->stats.tx_bytes += size; - netif_wake_queue(chan->pppdev.dev); + chan->netdev->stats.tx_packets++; + chan->netdev->stats.tx_bytes += size; + netif_wake_queue(chan->netdev); return 1; } -static struct net_device_stats *cosa_net_stats(struct net_device *dev) -{ - struct channel_data *chan = dev->ml_priv; - return &chan->stats; -} - - /*---------- Character device ---------- */ -static void chardev_channel_init(struct channel_data *chan) -{ - mutex_init(&chan->rlock); - init_MUTEX(&chan->wsem); -} - static ssize_t cosa_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { @@ -1223,16 +1187,15 @@ static int cosa_ioctl_common(struct cosa_data *cosa, return -ENOIOCTLCMD; } -static int cosa_sppp_ioctl(struct net_device *dev, struct ifreq *ifr, - int cmd) +static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { int rv; - struct channel_data *chan = dev->ml_priv; - rv = cosa_ioctl_common(chan->cosa, chan, cmd, (unsigned long)ifr->ifr_data); - if (rv == -ENOIOCTLCMD) { - return sppp_do_ioctl(dev, ifr, cmd); - } - return rv; + struct channel_data *chan = dev_to_chan(dev); + rv = cosa_ioctl_common(chan->cosa, chan, cmd, + (unsigned long)ifr->ifr_data); + if (rv != -ENOIOCTLCMD) + return rv; + return hdlc_ioctl(dev, ifr, cmd); } static int cosa_chardev_ioctl(struct inode *inode, struct file *file, -- cgit v1.2.3 From 52e8a6a2d8dc19002d1757870d16051157ce999c Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Wed, 2 Jul 2008 17:47:52 +0200 Subject: WAN: Convert Zilog-based drivers to generic HDLC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/Kconfig | 4 +- drivers/net/wan/Makefile | 6 +- drivers/net/wan/hostess_sv11.c | 382 +++++++++++++++++------------------------ drivers/net/wan/sealevel.c | 361 +++++++++++++++----------------------- drivers/net/wan/z85230.c | 193 +++++++++------------ drivers/net/wan/z85230.h | 10 +- 6 files changed, 382 insertions(+), 574 deletions(-) diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index e08cd4bf7f51..04c714aa7a6a 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -25,7 +25,7 @@ if WAN # There is no way to detect a comtrol sv11 - force it modular for now. config HOSTESS_SV11 tristate "Comtrol Hostess SV-11 support" - depends on ISA && m && ISA_DMA_API && INET + depends on ISA && m && ISA_DMA_API && INET && HDLC help Driver for Comtrol Hostess SV-11 network card which operates on low speed synchronous serial links at up to @@ -88,7 +88,7 @@ config LANMEDIA # There is no way to detect a Sealevel board. Force it modular config SEALEVEL_4021 tristate "Sealevel Systems 4021 support" - depends on ISA && m && ISA_DMA_API && INET + depends on ISA && m && ISA_DMA_API && INET && HDLC help This is a driver for the Sealevel Systems ACB 56 serial I/O adapter. diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index 9d085e0f0f44..5d27a17792cb 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -21,11 +21,11 @@ pc300-y := pc300_drv.o pc300-$(CONFIG_PC300_MLPPP) += pc300_tty.o pc300-objs := $(pc300-y) -obj-$(CONFIG_HOSTESS_SV11) += z85230.o syncppp.o hostess_sv11.o -obj-$(CONFIG_SEALEVEL_4021) += z85230.o syncppp.o sealevel.o +obj-$(CONFIG_HOSTESS_SV11) += z85230.o hostess_sv11.o +obj-$(CONFIG_SEALEVEL_4021) += z85230.o sealevel.o obj-$(CONFIG_COSA) += cosa.o obj-$(CONFIG_FARSYNC) += farsync.o -obj-$(CONFIG_DSCC4) += dscc4.o +obj-$(CONFIG_DSCC4) += dscc4.o obj-$(CONFIG_LANMEDIA) += syncppp.o obj-$(CONFIG_X25_ASY) += x25_asy.o diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c index f3065d3473fd..e299313f828a 100644 --- a/drivers/net/wan/hostess_sv11.c +++ b/drivers/net/wan/hostess_sv11.c @@ -16,6 +16,8 @@ * touching control registers. * * Port B isnt wired (why - beats me) + * + * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa */ #include @@ -26,6 +28,7 @@ #include #include #include +#include #include #include @@ -33,34 +36,31 @@ #include #include #include -#include #include "z85230.h" static int dma; -struct sv11_device -{ - void *if_ptr; /* General purpose pointer (used by SPPP) */ - struct z8530_dev sync; - struct ppp_device netdev; -}; - /* * Network driver support routines */ +static inline struct z8530_dev* dev_to_sv(struct net_device *dev) +{ + return (struct z8530_dev *)dev_to_hdlc(dev)->priv; +} + /* - * Frame receive. Simple for our card as we do sync ppp and there + * Frame receive. Simple for our card as we do HDLC and there * is no funny garbage involved */ - + static void hostess_input(struct z8530_channel *c, struct sk_buff *skb) { /* Drop the CRC - it's not a good idea to try and negotiate it ;) */ - skb_trim(skb, skb->len-2); - skb->protocol=__constant_htons(ETH_P_WAN_PPP); + skb_trim(skb, skb->len - 2); + skb->protocol = hdlc_type_trans(skb, c->netdevice); skb_reset_mac_header(skb); - skb->dev=c->netdevice; + skb->dev = c->netdevice; /* * Send it to the PPP layer. We don't have time to process * it right now. @@ -68,56 +68,51 @@ static void hostess_input(struct z8530_channel *c, struct sk_buff *skb) netif_rx(skb); c->netdevice->last_rx = jiffies; } - + /* * We've been placed in the UP state - */ - + */ + static int hostess_open(struct net_device *d) { - struct sv11_device *sv11=d->ml_priv; + struct z8530_dev *sv11 = dev_to_sv(d); int err = -1; - + /* * Link layer up */ - switch(dma) - { + switch (dma) { case 0: - err=z8530_sync_open(d, &sv11->sync.chanA); + err = z8530_sync_open(d, &sv11->chanA); break; case 1: - err=z8530_sync_dma_open(d, &sv11->sync.chanA); + err = z8530_sync_dma_open(d, &sv11->chanA); break; case 2: - err=z8530_sync_txdma_open(d, &sv11->sync.chanA); + err = z8530_sync_txdma_open(d, &sv11->chanA); break; } - - if(err) + + if (err) return err; - /* - * Begin PPP - */ - err=sppp_open(d); - if(err) - { - switch(dma) - { + + err = hdlc_open(d); + if (err) { + switch (dma) { case 0: - z8530_sync_close(d, &sv11->sync.chanA); + z8530_sync_close(d, &sv11->chanA); break; case 1: - z8530_sync_dma_close(d, &sv11->sync.chanA); + z8530_sync_dma_close(d, &sv11->chanA); break; case 2: - z8530_sync_txdma_close(d, &sv11->sync.chanA); + z8530_sync_txdma_close(d, &sv11->chanA); break; - } + } return err; } - sv11->sync.chanA.rx_function=hostess_input; - + sv11->chanA.rx_function = hostess_input; + /* * Go go go */ @@ -128,30 +123,24 @@ static int hostess_open(struct net_device *d) static int hostess_close(struct net_device *d) { - struct sv11_device *sv11=d->ml_priv; + struct z8530_dev *sv11 = dev_to_sv(d); /* * Discard new frames */ - sv11->sync.chanA.rx_function=z8530_null_rx; - /* - * PPP off - */ - sppp_close(d); - /* - * Link layer down - */ + sv11->chanA.rx_function = z8530_null_rx; + + hdlc_close(d); netif_stop_queue(d); - - switch(dma) - { + + switch (dma) { case 0: - z8530_sync_close(d, &sv11->sync.chanA); + z8530_sync_close(d, &sv11->chanA); break; case 1: - z8530_sync_dma_close(d, &sv11->sync.chanA); + z8530_sync_dma_close(d, &sv11->chanA); break; case 2: - z8530_sync_txdma_close(d, &sv11->sync.chanA); + z8530_sync_txdma_close(d, &sv11->chanA); break; } return 0; @@ -159,232 +148,174 @@ static int hostess_close(struct net_device *d) static int hostess_ioctl(struct net_device *d, struct ifreq *ifr, int cmd) { - /* struct sv11_device *sv11=d->ml_priv; - z8530_ioctl(d,&sv11->sync.chanA,ifr,cmd) */ - return sppp_do_ioctl(d, ifr,cmd); -} - -static struct net_device_stats *hostess_get_stats(struct net_device *d) -{ - struct sv11_device *sv11=d->ml_priv; - if(sv11) - return z8530_get_stats(&sv11->sync.chanA); - else - return NULL; + /* struct z8530_dev *sv11=dev_to_sv(d); + z8530_ioctl(d,&sv11->chanA,ifr,cmd) */ + return hdlc_ioctl(d, ifr, cmd); } /* - * Passed PPP frames, fire them downwind. + * Passed network frames, fire them downwind. */ - + static int hostess_queue_xmit(struct sk_buff *skb, struct net_device *d) { - struct sv11_device *sv11=d->ml_priv; - return z8530_queue_xmit(&sv11->sync.chanA, skb); + return z8530_queue_xmit(&dev_to_sv(d)->chanA, skb); } -static int hostess_neigh_setup(struct neighbour *n) +static int hostess_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) { - if (n->nud_state == NUD_NONE) { - n->ops = &arp_broken_ops; - n->output = n->ops->output; - } - return 0; -} - -static int hostess_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p) -{ - if (p->tbl->family == AF_INET) { - p->neigh_setup = hostess_neigh_setup; - p->ucast_probes = 0; - p->mcast_probes = 0; - } - return 0; -} - -static void sv11_setup(struct net_device *dev) -{ - dev->open = hostess_open; - dev->stop = hostess_close; - dev->hard_start_xmit = hostess_queue_xmit; - dev->get_stats = hostess_get_stats; - dev->do_ioctl = hostess_ioctl; - dev->neigh_setup = hostess_neigh_setup_dev; + if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT) + return 0; + return -EINVAL; } /* * Description block for a Comtrol Hostess SV11 card */ - -static struct sv11_device *sv11_init(int iobase, int irq) + +static struct z8530_dev *sv11_init(int iobase, int irq) { - struct z8530_dev *dev; - struct sv11_device *sv; - + struct z8530_dev *sv; + struct net_device *netdev; /* * Get the needed I/O space */ - - if(!request_region(iobase, 8, "Comtrol SV11")) - { - printk(KERN_WARNING "hostess: I/O 0x%X already in use.\n", iobase); + + if (!request_region(iobase, 8, "Comtrol SV11")) { + printk(KERN_WARNING "hostess: I/O 0x%X already in use.\n", + iobase); return NULL; } - - sv = kzalloc(sizeof(struct sv11_device), GFP_KERNEL); - if(!sv) - goto fail3; - - sv->if_ptr=&sv->netdev; - - sv->netdev.dev = alloc_netdev(0, "hdlc%d", sv11_setup); - if(!sv->netdev.dev) - goto fail2; - - dev=&sv->sync; - + + sv = kzalloc(sizeof(struct z8530_dev), GFP_KERNEL); + if (!sv) + goto err_kzalloc; + /* * Stuff in the I/O addressing */ - - dev->active = 0; - - dev->chanA.ctrlio=iobase+1; - dev->chanA.dataio=iobase+3; - dev->chanB.ctrlio=-1; - dev->chanB.dataio=-1; - dev->chanA.irqs=&z8530_nop; - dev->chanB.irqs=&z8530_nop; - - outb(0, iobase+4); /* DMA off */ - + + sv->active = 0; + + sv->chanA.ctrlio = iobase + 1; + sv->chanA.dataio = iobase + 3; + sv->chanB.ctrlio = -1; + sv->chanB.dataio = -1; + sv->chanA.irqs = &z8530_nop; + sv->chanB.irqs = &z8530_nop; + + outb(0, iobase + 4); /* DMA off */ + /* We want a fast IRQ for this device. Actually we'd like an even faster IRQ ;) - This is one driver RtLinux is made for */ - - if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "Hostess SV11", dev)<0) - { + + if (request_irq(irq, &z8530_interrupt, IRQF_DISABLED, + "Hostess SV11", sv) < 0) { printk(KERN_WARNING "hostess: IRQ %d already in use.\n", irq); - goto fail1; + goto err_irq; } - - dev->irq=irq; - dev->chanA.private=sv; - dev->chanA.netdevice=sv->netdev.dev; - dev->chanA.dev=dev; - dev->chanB.dev=dev; - - if(dma) - { + + sv->irq = irq; + sv->chanA.private = sv; + sv->chanA.dev = sv; + sv->chanB.dev = sv; + + if (dma) { /* * You can have DMA off or 1 and 3 thats the lot * on the Comtrol. */ - dev->chanA.txdma=3; - dev->chanA.rxdma=1; - outb(0x03|0x08, iobase+4); /* DMA on */ - if(request_dma(dev->chanA.txdma, "Hostess SV/11 (TX)")!=0) - goto fail; - - if(dma==1) - { - if(request_dma(dev->chanA.rxdma, "Hostess SV/11 (RX)")!=0) - goto dmafail; - } + sv->chanA.txdma = 3; + sv->chanA.rxdma = 1; + outb(0x03 | 0x08, iobase + 4); /* DMA on */ + if (request_dma(sv->chanA.txdma, "Hostess SV/11 (TX)")) + goto err_txdma; + + if (dma == 1) + if (request_dma(sv->chanA.rxdma, "Hostess SV/11 (RX)")) + goto err_rxdma; } /* Kill our private IRQ line the hostess can end up chattering until the configuration is set */ disable_irq(irq); - + /* * Begin normal initialise */ - - if(z8530_init(dev)!=0) - { + + if (z8530_init(sv)) { printk(KERN_ERR "Z8530 series device not found.\n"); enable_irq(irq); - goto dmafail2; + goto free_dma; } - z8530_channel_load(&dev->chanB, z8530_dead_port); - if(dev->type==Z85C30) - z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream); + z8530_channel_load(&sv->chanB, z8530_dead_port); + if (sv->type == Z85C30) + z8530_channel_load(&sv->chanA, z8530_hdlc_kilostream); else - z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230); - + z8530_channel_load(&sv->chanA, z8530_hdlc_kilostream_85230); + enable_irq(irq); - /* * Now we can take the IRQ */ - if(dev_alloc_name(dev->chanA.netdevice,"hdlc%d")>=0) - { - struct net_device *d=dev->chanA.netdevice; - /* - * Initialise the PPP components - */ - d->ml_priv = sv; - sppp_attach(&sv->netdev); - - /* - * Local fields - */ - - d->base_addr = iobase; - d->irq = irq; - - if(register_netdev(d)) - { - printk(KERN_ERR "%s: unable to register device.\n", - d->name); - sppp_detach(d); - goto dmafail2; - } + sv->chanA.netdevice = netdev = alloc_hdlcdev(sv); + if (!netdev) + goto free_dma; - z8530_describe(dev, "I/O", iobase); - dev->active=1; - return sv; + dev_to_hdlc(netdev)->attach = hostess_attach; + dev_to_hdlc(netdev)->xmit = hostess_queue_xmit; + netdev->open = hostess_open; + netdev->stop = hostess_close; + netdev->do_ioctl = hostess_ioctl; + netdev->base_addr = iobase; + netdev->irq = irq; + + if (register_hdlc_device(netdev)) { + printk(KERN_ERR "hostess: unable to register HDLC device.\n"); + free_netdev(netdev); + goto free_dma; } -dmafail2: - if(dma==1) - free_dma(dev->chanA.rxdma); -dmafail: - if(dma) - free_dma(dev->chanA.txdma); -fail: - free_irq(irq, dev); -fail1: - free_netdev(sv->netdev.dev); -fail2: + + z8530_describe(sv, "I/O", iobase); + sv->active = 1; + return sv; + +free_dma: + if (dma == 1) + free_dma(sv->chanA.rxdma); +err_rxdma: + if (dma) + free_dma(sv->chanA.txdma); +err_txdma: + free_irq(irq, sv); +err_irq: kfree(sv); -fail3: - release_region(iobase,8); +err_kzalloc: + release_region(iobase, 8); return NULL; } -static void sv11_shutdown(struct sv11_device *dev) +static void sv11_shutdown(struct z8530_dev *dev) { - sppp_detach(dev->netdev.dev); - unregister_netdev(dev->netdev.dev); - z8530_shutdown(&dev->sync); - free_irq(dev->sync.irq, dev); - if(dma) - { - if(dma==1) - free_dma(dev->sync.chanA.rxdma); - free_dma(dev->sync.chanA.txdma); + unregister_hdlc_device(dev->chanA.netdevice); + z8530_shutdown(dev); + free_irq(dev->irq, dev); + if (dma) { + if (dma == 1) + free_dma(dev->chanA.rxdma); + free_dma(dev->chanA.txdma); } - release_region(dev->sync.chanA.ctrlio-1, 8); - free_netdev(dev->netdev.dev); + release_region(dev->chanA.ctrlio - 1, 8); + free_netdev(dev->chanA.netdevice); kfree(dev); } -#ifdef MODULE - -static int io=0x200; -static int irq=9; +static int io = 0x200; +static int irq = 9; module_param(io, int, 0); MODULE_PARM_DESC(io, "The I/O base of the Comtrol Hostess SV11 card"); @@ -397,22 +328,17 @@ MODULE_AUTHOR("Alan Cox"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Modular driver for the Comtrol Hostess SV11"); -static struct sv11_device *sv11_unit; +static struct z8530_dev *sv11_unit; int init_module(void) { - printk(KERN_INFO "SV-11 Z85230 Synchronous Driver v 0.03.\n"); - printk(KERN_INFO "(c) Copyright 2001, Red Hat Inc.\n"); - if((sv11_unit=sv11_init(io,irq))==NULL) + if ((sv11_unit = sv11_init(io, irq)) == NULL) return -ENODEV; return 0; } void cleanup_module(void) { - if(sv11_unit) + if (sv11_unit) sv11_shutdown(sv11_unit); } - -#endif - diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c index 44a89df1b8bf..c0235844a4d5 100644 --- a/drivers/net/wan/sealevel.c +++ b/drivers/net/wan/sealevel.c @@ -8,6 +8,7 @@ * * (c) Copyright 1999, 2001 Alan Cox * (c) Copyright 2001 Red Hat Inc. + * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa * */ @@ -19,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -27,22 +29,19 @@ #include #include #include -#include #include "z85230.h" struct slvl_device { - void *if_ptr; /* General purpose pointer (used by SPPP) */ struct z8530_channel *chan; - struct ppp_device pppdev; int channel; }; struct slvl_board { - struct slvl_device *dev[2]; + struct slvl_device dev[2]; struct z8530_dev board; int iobase; }; @@ -51,72 +50,69 @@ struct slvl_board * Network driver support routines */ +static inline struct slvl_device* dev_to_chan(struct net_device *dev) +{ + return (struct slvl_device *)dev_to_hdlc(dev)->priv; +} + /* - * Frame receive. Simple for our card as we do sync ppp and there + * Frame receive. Simple for our card as we do HDLC and there * is no funny garbage involved */ - + static void sealevel_input(struct z8530_channel *c, struct sk_buff *skb) { /* Drop the CRC - it's not a good idea to try and negotiate it ;) */ - skb_trim(skb, skb->len-2); - skb->protocol=htons(ETH_P_WAN_PPP); + skb_trim(skb, skb->len - 2); + skb->protocol = hdlc_type_trans(skb, c->netdevice); skb_reset_mac_header(skb); - skb->dev=c->netdevice; - /* - * Send it to the PPP layer. We don't have time to process - * it right now. - */ + skb->dev = c->netdevice; netif_rx(skb); c->netdevice->last_rx = jiffies; } - + /* * We've been placed in the UP state - */ - + */ + static int sealevel_open(struct net_device *d) { - struct slvl_device *slvl=d->priv; + struct slvl_device *slvl = dev_to_chan(d); int err = -1; int unit = slvl->channel; - + /* - * Link layer up. + * Link layer up. */ - switch(unit) + switch (unit) { case 0: - err=z8530_sync_dma_open(d, slvl->chan); + err = z8530_sync_dma_open(d, slvl->chan); break; case 1: - err=z8530_sync_open(d, slvl->chan); + err = z8530_sync_open(d, slvl->chan); break; } - - if(err) + + if (err) return err; - /* - * Begin PPP - */ - err=sppp_open(d); - if(err) - { - switch(unit) - { + + err = hdlc_open(d); + if (err) { + switch (unit) { case 0: z8530_sync_dma_close(d, slvl->chan); break; case 1: z8530_sync_close(d, slvl->chan); break; - } + } return err; } - - slvl->chan->rx_function=sealevel_input; - + + slvl->chan->rx_function = sealevel_input; + /* * Go go go */ @@ -126,26 +122,19 @@ static int sealevel_open(struct net_device *d) static int sealevel_close(struct net_device *d) { - struct slvl_device *slvl=d->priv; + struct slvl_device *slvl = dev_to_chan(d); int unit = slvl->channel; - + /* * Discard new frames */ - - slvl->chan->rx_function=z8530_null_rx; - - /* - * PPP off - */ - sppp_close(d); - /* - * Link layer down - */ + slvl->chan->rx_function = z8530_null_rx; + + hdlc_close(d); netif_stop_queue(d); - - switch(unit) + + switch (unit) { case 0: z8530_sync_dma_close(d, slvl->chan); @@ -159,210 +148,153 @@ static int sealevel_close(struct net_device *d) static int sealevel_ioctl(struct net_device *d, struct ifreq *ifr, int cmd) { - /* struct slvl_device *slvl=d->priv; + /* struct slvl_device *slvl=dev_to_chan(d); z8530_ioctl(d,&slvl->sync.chanA,ifr,cmd) */ - return sppp_do_ioctl(d, ifr,cmd); -} - -static struct net_device_stats *sealevel_get_stats(struct net_device *d) -{ - struct slvl_device *slvl=d->priv; - if(slvl) - return z8530_get_stats(slvl->chan); - else - return NULL; + return hdlc_ioctl(d, ifr, cmd); } /* - * Passed PPP frames, fire them downwind. + * Passed network frames, fire them downwind. */ - + static int sealevel_queue_xmit(struct sk_buff *skb, struct net_device *d) { - struct slvl_device *slvl=d->priv; - return z8530_queue_xmit(slvl->chan, skb); + return z8530_queue_xmit(dev_to_chan(d)->chan, skb); } -static int sealevel_neigh_setup(struct neighbour *n) +static int sealevel_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) { - if (n->nud_state == NUD_NONE) { - n->ops = &arp_broken_ops; - n->output = n->ops->output; - } - return 0; + if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT) + return 0; + return -EINVAL; } -static int sealevel_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p) +static int slvl_setup(struct slvl_device *sv, int iobase, int irq) { - if (p->tbl->family == AF_INET) { - p->neigh_setup = sealevel_neigh_setup; - p->ucast_probes = 0; - p->mcast_probes = 0; + struct net_device *dev = alloc_hdlcdev(sv); + if (!dev) + return -1; + + dev_to_hdlc(dev)->attach = sealevel_attach; + dev_to_hdlc(dev)->xmit = sealevel_queue_xmit; + dev->open = sealevel_open; + dev->stop = sealevel_close; + dev->do_ioctl = sealevel_ioctl; + dev->base_addr = iobase; + dev->irq = irq; + + if (register_hdlc_device(dev)) { + printk(KERN_ERR "sealevel: unable to register HDLC device\n"); + free_netdev(dev); + return -1; } - return 0; -} -static int sealevel_attach(struct net_device *dev) -{ - struct slvl_device *sv = dev->priv; - sppp_attach(&sv->pppdev); + sv->chan->netdevice = dev; return 0; } -static void sealevel_detach(struct net_device *dev) -{ - sppp_detach(dev); -} - -static void slvl_setup(struct net_device *d) -{ - d->open = sealevel_open; - d->stop = sealevel_close; - d->init = sealevel_attach; - d->uninit = sealevel_detach; - d->hard_start_xmit = sealevel_queue_xmit; - d->get_stats = sealevel_get_stats; - d->set_multicast_list = NULL; - d->do_ioctl = sealevel_ioctl; - d->neigh_setup = sealevel_neigh_setup_dev; - d->set_mac_address = NULL; - -} - -static inline struct slvl_device *slvl_alloc(int iobase, int irq) -{ - struct net_device *d; - struct slvl_device *sv; - - d = alloc_netdev(sizeof(struct slvl_device), "hdlc%d", - slvl_setup); - - if (!d) - return NULL; - - sv = d->priv; - d->ml_priv = sv; - sv->if_ptr = &sv->pppdev; - sv->pppdev.dev = d; - d->base_addr = iobase; - d->irq = irq; - - return sv; -} - /* * Allocate and setup Sealevel board. */ - -static __init struct slvl_board *slvl_init(int iobase, int irq, + +static __init struct slvl_board *slvl_init(int iobase, int irq, int txdma, int rxdma, int slow) { struct z8530_dev *dev; struct slvl_board *b; - + /* * Get the needed I/O space */ - if(!request_region(iobase, 8, "Sealevel 4021")) - { - printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n", iobase); + if (!request_region(iobase, 8, "Sealevel 4021")) { + printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n", + iobase); return NULL; } - - b = kzalloc(sizeof(struct slvl_board), GFP_KERNEL); - if(!b) - goto fail3; - if (!(b->dev[0]= slvl_alloc(iobase, irq))) - goto fail2; + b = kzalloc(sizeof(struct slvl_board), GFP_KERNEL); + if (!b) + goto err_kzalloc; - b->dev[0]->chan = &b->board.chanA; - b->dev[0]->channel = 0; - - if (!(b->dev[1] = slvl_alloc(iobase, irq))) - goto fail1_0; + b->dev[0].chan = &b->board.chanA; + b->dev[0].channel = 0; - b->dev[1]->chan = &b->board.chanB; - b->dev[1]->channel = 1; + b->dev[1].chan = &b->board.chanB; + b->dev[1].channel = 1; dev = &b->board; - + /* * Stuff in the I/O addressing */ - + dev->active = 0; b->iobase = iobase; - + /* * Select 8530 delays for the old board */ - - if(slow) + + if (slow) iobase |= Z8530_PORT_SLEEP; - - dev->chanA.ctrlio=iobase+1; - dev->chanA.dataio=iobase; - dev->chanB.ctrlio=iobase+3; - dev->chanB.dataio=iobase+2; - - dev->chanA.irqs=&z8530_nop; - dev->chanB.irqs=&z8530_nop; - + + dev->chanA.ctrlio = iobase + 1; + dev->chanA.dataio = iobase; + dev->chanB.ctrlio = iobase + 3; + dev->chanB.dataio = iobase + 2; + + dev->chanA.irqs = &z8530_nop; + dev->chanB.irqs = &z8530_nop; + /* * Assert DTR enable DMA */ - - outb(3|(1<<7), b->iobase+4); - + + outb(3 | (1 << 7), b->iobase + 4); + /* We want a fast IRQ for this device. Actually we'd like an even faster IRQ ;) - This is one driver RtLinux is made for */ - - if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "SeaLevel", dev)<0) - { + + if (request_irq(irq, &z8530_interrupt, IRQF_DISABLED, + "SeaLevel", dev) < 0) { printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq); - goto fail1_1; + goto err_request_irq; } - - dev->irq=irq; - dev->chanA.private=&b->dev[0]; - dev->chanB.private=&b->dev[1]; - dev->chanA.netdevice=b->dev[0]->pppdev.dev; - dev->chanB.netdevice=b->dev[1]->pppdev.dev; - dev->chanA.dev=dev; - dev->chanB.dev=dev; - - dev->chanA.txdma=3; - dev->chanA.rxdma=1; - if(request_dma(dev->chanA.txdma, "SeaLevel (TX)")!=0) - goto fail; - - if(request_dma(dev->chanA.rxdma, "SeaLevel (RX)")!=0) - goto dmafail; - + + dev->irq = irq; + dev->chanA.private = &b->dev[0]; + dev->chanB.private = &b->dev[1]; + dev->chanA.dev = dev; + dev->chanB.dev = dev; + + dev->chanA.txdma = 3; + dev->chanA.rxdma = 1; + if (request_dma(dev->chanA.txdma, "SeaLevel (TX)")) + goto err_dma_tx; + + if (request_dma(dev->chanA.rxdma, "SeaLevel (RX)")) + goto err_dma_rx; + disable_irq(irq); - + /* * Begin normal initialise */ - - if(z8530_init(dev)!=0) - { + + if (z8530_init(dev) != 0) { printk(KERN_ERR "Z8530 series device not found.\n"); enable_irq(irq); - goto dmafail2; + goto free_hw; } - if(dev->type==Z85C30) - { + if (dev->type == Z85C30) { z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream); z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream); - } - else - { + } else { z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230); z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream_85230); } @@ -370,36 +302,31 @@ static __init struct slvl_board *slvl_init(int iobase, int irq, /* * Now we can take the IRQ */ - + enable_irq(irq); - if (register_netdev(b->dev[0]->pppdev.dev)) - goto dmafail2; - - if (register_netdev(b->dev[1]->pppdev.dev)) - goto fail_unit; + if (slvl_setup(&b->dev[0], iobase, irq)) + goto free_hw; + if (slvl_setup(&b->dev[1], iobase, irq)) + goto free_netdev0; z8530_describe(dev, "I/O", iobase); - dev->active=1; + dev->active = 1; return b; -fail_unit: - unregister_netdev(b->dev[0]->pppdev.dev); - -dmafail2: +free_netdev0: + unregister_hdlc_device(b->dev[0].chan->netdevice); + free_netdev(b->dev[0].chan->netdevice); +free_hw: free_dma(dev->chanA.rxdma); -dmafail: +err_dma_rx: free_dma(dev->chanA.txdma); -fail: +err_dma_tx: free_irq(irq, dev); -fail1_1: - free_netdev(b->dev[1]->pppdev.dev); -fail1_0: - free_netdev(b->dev[0]->pppdev.dev); -fail2: +err_request_irq: kfree(b); -fail3: - release_region(iobase,8); +err_kzalloc: + release_region(iobase, 8); return NULL; } @@ -408,14 +335,14 @@ static void __exit slvl_shutdown(struct slvl_board *b) int u; z8530_shutdown(&b->board); - - for(u=0; u<2; u++) + + for (u = 0; u < 2; u++) { - struct net_device *d = b->dev[u]->pppdev.dev; - unregister_netdev(d); + struct net_device *d = b->dev[u].chan->netdevice; + unregister_hdlc_device(d); free_netdev(d); } - + free_irq(b->board.irq, &b->board); free_dma(b->board.chanA.rxdma); free_dma(b->board.chanA.txdma); @@ -451,10 +378,6 @@ static struct slvl_board *slvl_unit; static int __init slvl_init_module(void) { -#ifdef MODULE - printk(KERN_INFO "SeaLevel Z85230 Synchronous Driver v 0.02.\n"); - printk(KERN_INFO "(c) Copyright 1998, Building Number Three Ltd.\n"); -#endif slvl_unit = slvl_init(io, irq, txdma, rxdma, slow); return slvl_unit ? 0 : -ENODEV; diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c index 98ef400908b8..243bd8d918fe 100644 --- a/drivers/net/wan/z85230.c +++ b/drivers/net/wan/z85230.c @@ -43,6 +43,7 @@ #include #include #include +#include #include #include #include @@ -51,7 +52,6 @@ #define RT_UNLOCK #include -#include #include "z85230.h" @@ -440,51 +440,46 @@ static void z8530_tx(struct z8530_channel *c) * A status event occurred in PIO synchronous mode. There are several * reasons the chip will bother us here. A transmit underrun means we * failed to feed the chip fast enough and just broke a packet. A DCD - * change is a line up or down. We communicate that back to the protocol - * layer for synchronous PPP to renegotiate. + * change is a line up or down. */ static void z8530_status(struct z8530_channel *chan) { u8 status, altered; - status=read_zsreg(chan, R0); - altered=chan->status^status; - - chan->status=status; - - if(status&TxEOM) - { + status = read_zsreg(chan, R0); + altered = chan->status ^ status; + + chan->status = status; + + if (status & TxEOM) { /* printk("%s: Tx underrun.\n", chan->dev->name); */ - chan->stats.tx_fifo_errors++; + chan->netdevice->stats.tx_fifo_errors++; write_zsctrl(chan, ERR_RES); z8530_tx_done(chan); } - - if(altered&chan->dcdcheck) + + if (altered & chan->dcdcheck) { - if(status&chan->dcdcheck) - { + if (status & chan->dcdcheck) { printk(KERN_INFO "%s: DCD raised\n", chan->dev->name); - write_zsreg(chan, R3, chan->regs[3]|RxENABLE); - if(chan->netdevice && - ((chan->netdevice->type == ARPHRD_HDLC) || - (chan->netdevice->type == ARPHRD_PPP))) - sppp_reopen(chan->netdevice); - } - else - { + write_zsreg(chan, R3, chan->regs[3] | RxENABLE); + if (chan->netdevice) + netif_carrier_on(chan->netdevice); + } else { printk(KERN_INFO "%s: DCD lost\n", chan->dev->name); - write_zsreg(chan, R3, chan->regs[3]&~RxENABLE); + write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE); z8530_flush_fifo(chan); + if (chan->netdevice) + netif_carrier_off(chan->netdevice); } - - } + + } write_zsctrl(chan, RES_EXT_INT); write_zsctrl(chan, RES_H_IUS); } -struct z8530_irqhandler z8530_sync= +struct z8530_irqhandler z8530_sync = { z8530_rx, z8530_tx, @@ -556,8 +551,7 @@ static void z8530_dma_tx(struct z8530_channel *chan) * * A status event occurred on the Z8530. We receive these for two reasons * when in DMA mode. Firstly if we finished a packet transfer we get one - * and kick the next packet out. Secondly we may see a DCD change and - * have to poke the protocol layer. + * and kick the next packet out. Secondly we may see a DCD change. * */ @@ -586,24 +580,21 @@ static void z8530_dma_status(struct z8530_channel *chan) } } - if(altered&chan->dcdcheck) + if (altered & chan->dcdcheck) { - if(status&chan->dcdcheck) - { + if (status & chan->dcdcheck) { printk(KERN_INFO "%s: DCD raised\n", chan->dev->name); - write_zsreg(chan, R3, chan->regs[3]|RxENABLE); - if(chan->netdevice && - ((chan->netdevice->type == ARPHRD_HDLC) || - (chan->netdevice->type == ARPHRD_PPP))) - sppp_reopen(chan->netdevice); - } - else - { + write_zsreg(chan, R3, chan->regs[3] | RxENABLE); + if (chan->netdevice) + netif_carrier_on(chan->netdevice); + } else { printk(KERN_INFO "%s:DCD lost\n", chan->dev->name); - write_zsreg(chan, R3, chan->regs[3]&~RxENABLE); + write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE); z8530_flush_fifo(chan); + if (chan->netdevice) + netif_carrier_off(chan->netdevice); } - } + } write_zsctrl(chan, RES_EXT_INT); write_zsctrl(chan, RES_H_IUS); @@ -1459,10 +1450,10 @@ static void z8530_tx_begin(struct z8530_channel *c) /* * Check if we crapped out. */ - if(get_dma_residue(c->txdma)) + if (get_dma_residue(c->txdma)) { - c->stats.tx_dropped++; - c->stats.tx_fifo_errors++; + c->netdevice->stats.tx_dropped++; + c->netdevice->stats.tx_fifo_errors++; } release_dma_lock(flags); } @@ -1534,21 +1525,21 @@ static void z8530_tx_begin(struct z8530_channel *c) * packet. This code is fairly timing sensitive. * * Called with the register lock held. - */ - + */ + static void z8530_tx_done(struct z8530_channel *c) { struct sk_buff *skb; /* Actually this can happen.*/ - if(c->tx_skb==NULL) + if (c->tx_skb == NULL) return; - skb=c->tx_skb; - c->tx_skb=NULL; + skb = c->tx_skb; + c->tx_skb = NULL; z8530_tx_begin(c); - c->stats.tx_packets++; - c->stats.tx_bytes+=skb->len; + c->netdevice->stats.tx_packets++; + c->netdevice->stats.tx_bytes += skb->len; dev_kfree_skb_irq(skb); } @@ -1558,7 +1549,7 @@ static void z8530_tx_done(struct z8530_channel *c) * @skb: The buffer * * We point the receive handler at this function when idle. Instead - * of syncppp processing the frames we get to throw them away. + * of processing the frames we get to throw them away. */ void z8530_null_rx(struct z8530_channel *c, struct sk_buff *skb) @@ -1635,10 +1626,11 @@ static void z8530_rx_done(struct z8530_channel *c) else /* Can't occur as we dont reenable the DMA irq until after the flip is done */ - printk(KERN_WARNING "%s: DMA flip overrun!\n", c->netdevice->name); - + printk(KERN_WARNING "%s: DMA flip overrun!\n", + c->netdevice->name); + release_dma_lock(flags); - + /* * Shove the old buffer into an sk_buff. We can't DMA * directly into one on a PC - it might be above the 16Mb @@ -1646,27 +1638,23 @@ static void z8530_rx_done(struct z8530_channel *c) * can avoid the copy. Optimisation 2 - make the memcpy * a copychecksum. */ - - skb=dev_alloc_skb(ct); - if(skb==NULL) - { - c->stats.rx_dropped++; - printk(KERN_WARNING "%s: Memory squeeze.\n", c->netdevice->name); - } - else - { + + skb = dev_alloc_skb(ct); + if (skb == NULL) { + c->netdevice->stats.rx_dropped++; + printk(KERN_WARNING "%s: Memory squeeze.\n", + c->netdevice->name); + } else { skb_put(skb, ct); skb_copy_to_linear_data(skb, rxb, ct); - c->stats.rx_packets++; - c->stats.rx_bytes+=ct; + c->netdevice->stats.rx_packets++; + c->netdevice->stats.rx_bytes += ct; } - c->dma_ready=1; - } - else - { - RT_LOCK; - skb=c->skb; - + c->dma_ready = 1; + } else { + RT_LOCK; + skb = c->skb; + /* * The game we play for non DMA is similar. We want to * get the controller set up for the next packet as fast @@ -1677,48 +1665,39 @@ static void z8530_rx_done(struct z8530_channel *c) * if you build a system where the sync irq isnt blocked * by the kernel IRQ disable then you need only block the * sync IRQ for the RT_LOCK area. - * + * */ ct=c->count; - + c->skb = c->skb2; c->count = 0; c->max = c->mtu; - if(c->skb) - { + if (c->skb) { c->dptr = c->skb->data; c->max = c->mtu; - } - else - { - c->count= 0; + } else { + c->count = 0; c->max = 0; } RT_UNLOCK; c->skb2 = dev_alloc_skb(c->mtu); - if(c->skb2==NULL) + if (c->skb2 == NULL) printk(KERN_WARNING "%s: memory squeeze.\n", - c->netdevice->name); + c->netdevice->name); else - { - skb_put(c->skb2,c->mtu); - } - c->stats.rx_packets++; - c->stats.rx_bytes+=ct; - + skb_put(c->skb2, c->mtu); + c->netdevice->stats.rx_packets++; + c->netdevice->stats.rx_bytes += ct; } /* * If we received a frame we must now process it. */ - if(skb) - { + if (skb) { skb_trim(skb, ct); - c->rx_function(c,skb); - } - else - { - c->stats.rx_dropped++; + c->rx_function(c, skb); + } else { + c->netdevice->stats.rx_dropped++; printk(KERN_ERR "%s: Lost a frame\n", c->netdevice->name); } } @@ -1730,7 +1709,7 @@ static void z8530_rx_done(struct z8530_channel *c) * Returns true if the buffer cross a DMA boundary on a PC. The poor * thing can only DMA within a 64K block not across the edges of it. */ - + static inline int spans_boundary(struct sk_buff *skb) { unsigned long a=(unsigned long)skb->data; @@ -1799,24 +1778,6 @@ int z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb) EXPORT_SYMBOL(z8530_queue_xmit); -/** - * z8530_get_stats - Get network statistics - * @c: The channel to use - * - * Get the statistics block. We keep the statistics in software as - * the chip doesn't do it for us. - * - * Locking is ignored here - we could lock for a copy but its - * not likely to be that big an issue - */ - -struct net_device_stats *z8530_get_stats(struct z8530_channel *c) -{ - return &c->stats; -} - -EXPORT_SYMBOL(z8530_get_stats); - /* * Module support */ diff --git a/drivers/net/wan/z85230.h b/drivers/net/wan/z85230.h index 158aea7b8eac..4f372396c512 100644 --- a/drivers/net/wan/z85230.h +++ b/drivers/net/wan/z85230.h @@ -325,7 +325,6 @@ struct z8530_channel void *private; /* For our owner */ struct net_device *netdevice; /* Network layer device */ - struct net_device_stats stats; /* Network layer statistics */ /* * Async features @@ -366,13 +365,13 @@ struct z8530_channel unsigned char tx_active; /* character is being xmitted */ unsigned char tx_stopped; /* output is suspended */ - spinlock_t *lock; /* Devicr lock */ -}; + spinlock_t *lock; /* Device lock */ +}; /* * Each Z853x0 device. - */ - + */ + struct z8530_dev { char *name; /* Device instance name */ @@ -408,7 +407,6 @@ extern int z8530_sync_txdma_open(struct net_device *, struct z8530_channel *); extern int z8530_sync_txdma_close(struct net_device *, struct z8530_channel *); extern int z8530_channel_load(struct z8530_channel *, u8 *); extern int z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb); -extern struct net_device_stats *z8530_get_stats(struct z8530_channel *c); extern void z8530_null_rx(struct z8530_channel *c, struct sk_buff *skb); -- cgit v1.2.3 From 64bef7630ad5b0ccfdd73973e95cf7b7e39224d0 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Wed, 2 Jul 2008 20:46:21 +0200 Subject: WAN: Port LMC driver to generic HDLC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/Kconfig | 7 +- drivers/net/wan/Makefile | 1 - drivers/net/wan/lmc/lmc_ioctl.h | 2 +- drivers/net/wan/lmc/lmc_main.c | 657 +++++++++++++++++----------------------- drivers/net/wan/lmc/lmc_media.c | 55 ++-- drivers/net/wan/lmc/lmc_proto.c | 146 ++------- drivers/net/wan/lmc/lmc_proto.h | 14 +- drivers/net/wan/lmc/lmc_var.h | 136 ++------- 8 files changed, 365 insertions(+), 653 deletions(-) diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 04c714aa7a6a..766b8bf2f7aa 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -61,7 +61,7 @@ config COSA # config LANMEDIA tristate "LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards" - depends on PCI && VIRT_TO_BUS + depends on PCI && VIRT_TO_BUS && HDLC ---help--- Driver for the following Lan Media family of serial boards: @@ -78,9 +78,8 @@ config LANMEDIA - LMC 5245 board connects directly to a T3 circuit saving the additional external hardware. - To change setting such as syncPPP vs Cisco HDLC or clock source you - will need lmcctl. It is available at - (broken link). + To change setting such as clock source you will need lmcctl. + It is available at (broken link). To compile this driver as a module, choose M here: the module will be called lmc. diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index 5d27a17792cb..102549605d09 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -26,7 +26,6 @@ obj-$(CONFIG_SEALEVEL_4021) += z85230.o sealevel.o obj-$(CONFIG_COSA) += cosa.o obj-$(CONFIG_FARSYNC) += farsync.o obj-$(CONFIG_DSCC4) += dscc4.o -obj-$(CONFIG_LANMEDIA) += syncppp.o obj-$(CONFIG_X25_ASY) += x25_asy.o obj-$(CONFIG_LANMEDIA) += lmc/ diff --git a/drivers/net/wan/lmc/lmc_ioctl.h b/drivers/net/wan/lmc/lmc_ioctl.h index 57dd861cd3db..72fb113a44ca 100644 --- a/drivers/net/wan/lmc/lmc_ioctl.h +++ b/drivers/net/wan/lmc/lmc_ioctl.h @@ -61,7 +61,7 @@ /* * IFTYPE defines */ -#define LMC_PPP 1 /* use sppp interface */ +#define LMC_PPP 1 /* use generic HDLC interface */ #define LMC_NET 2 /* use direct net interface */ #define LMC_RAW 3 /* use direct net interface */ diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index 62133cee446a..f64f4ca80b55 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -1,6 +1,7 @@ /* * Copyright (c) 1997-2000 LAN Media Corporation (LMC) * All rights reserved. www.lanmedia.com + * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa * * This code is written by: * Andrew Stanley-Jones (asj@cban.com) @@ -36,8 +37,6 @@ * */ -/* $Id: lmc_main.c,v 1.36 2000/04/11 05:25:25 asj Exp $ */ - #include #include #include @@ -49,6 +48,7 @@ #include #include #include +#include #include #include #include @@ -57,9 +57,6 @@ #include #include #include - -#include - #include /* Processor type for cache alignment. */ #include #include @@ -78,8 +75,6 @@ #include "lmc_debug.h" #include "lmc_proto.h" -static int lmc_first_load = 0; - static int LMC_PKT_BUF_SZ = 1542; static struct pci_device_id lmc_pci_tbl[] = { @@ -91,10 +86,9 @@ static struct pci_device_id lmc_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, lmc_pci_tbl); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); -static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev); static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev); static int lmc_rx (struct net_device *dev); static int lmc_open(struct net_device *dev); @@ -114,20 +108,14 @@ static void lmc_driver_timeout(struct net_device *dev); * linux reserves 16 device specific IOCTLs. We call them * LMCIOC* to control various bits of our world. */ -int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ +int lmc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ { - lmc_softc_t *sc; + lmc_softc_t *sc = dev_to_sc(dev); lmc_ctl_t ctl; - int ret; - u_int16_t regVal; + int ret = -EOPNOTSUPP; + u16 regVal; unsigned long flags; - struct sppp *sp; - - ret = -EOPNOTSUPP; - - sc = dev->priv; - lmc_trace(dev, "lmc_ioctl in"); /* @@ -149,7 +137,6 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ break; case LMCIOCSINFO: /*fold01*/ - sp = &((struct ppp_device *) dev)->sppp; if (!capable(CAP_NET_ADMIN)) { ret = -EPERM; break; @@ -175,25 +162,20 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ sc->TxDescriptControlInit &= ~LMC_TDES_ADD_CRC_DISABLE; } - if (ctl.keepalive_onoff == LMC_CTL_OFF) - sp->pp_flags &= ~PP_KEEPALIVE; /* Turn off */ - else - sp->pp_flags |= PP_KEEPALIVE; /* Turn on */ - ret = 0; break; case LMCIOCIFTYPE: /*fold01*/ { - u_int16_t old_type = sc->if_type; - u_int16_t new_type; + u16 old_type = sc->if_type; + u16 new_type; if (!capable(CAP_NET_ADMIN)) { ret = -EPERM; break; } - if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u_int16_t))) { + if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u16))) { ret = -EFAULT; break; } @@ -206,15 +188,11 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ } lmc_proto_close(sc); - lmc_proto_detach(sc); sc->if_type = new_type; -// lmc_proto_init(sc); lmc_proto_attach(sc); - lmc_proto_open(sc); - - ret = 0 ; - break ; + ret = lmc_proto_open(sc); + break; } case LMCIOCGETXINFO: /*fold01*/ @@ -241,51 +219,53 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ break; - case LMCIOCGETLMCSTATS: /*fold01*/ - if (sc->lmc_cardtype == LMC_CARDTYPE_T1){ - lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_LSB); - sc->stats.framingBitErrorCount += - lmc_mii_readreg (sc, 0, 18) & 0xff; - lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_MSB); - sc->stats.framingBitErrorCount += - (lmc_mii_readreg (sc, 0, 18) & 0xff) << 8; - lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_LSB); - sc->stats.lineCodeViolationCount += - lmc_mii_readreg (sc, 0, 18) & 0xff; - lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_MSB); - sc->stats.lineCodeViolationCount += - (lmc_mii_readreg (sc, 0, 18) & 0xff) << 8; - lmc_mii_writereg (sc, 0, 17, T1FRAMER_AERR); - regVal = lmc_mii_readreg (sc, 0, 18) & 0xff; - - sc->stats.lossOfFrameCount += - (regVal & T1FRAMER_LOF_MASK) >> 4; - sc->stats.changeOfFrameAlignmentCount += - (regVal & T1FRAMER_COFA_MASK) >> 2; - sc->stats.severelyErroredFrameCount += - regVal & T1FRAMER_SEF_MASK; - } - - if (copy_to_user(ifr->ifr_data, &sc->stats, - sizeof (struct lmc_statistics))) - ret = -EFAULT; - else - ret = 0; - break; + case LMCIOCGETLMCSTATS: + if (sc->lmc_cardtype == LMC_CARDTYPE_T1) { + lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_LSB); + sc->extra_stats.framingBitErrorCount += + lmc_mii_readreg(sc, 0, 18) & 0xff; + lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_MSB); + sc->extra_stats.framingBitErrorCount += + (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8; + lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_LSB); + sc->extra_stats.lineCodeViolationCount += + lmc_mii_readreg(sc, 0, 18) & 0xff; + lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_MSB); + sc->extra_stats.lineCodeViolationCount += + (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8; + lmc_mii_writereg(sc, 0, 17, T1FRAMER_AERR); + regVal = lmc_mii_readreg(sc, 0, 18) & 0xff; + + sc->extra_stats.lossOfFrameCount += + (regVal & T1FRAMER_LOF_MASK) >> 4; + sc->extra_stats.changeOfFrameAlignmentCount += + (regVal & T1FRAMER_COFA_MASK) >> 2; + sc->extra_stats.severelyErroredFrameCount += + regVal & T1FRAMER_SEF_MASK; + } + if (copy_to_user(ifr->ifr_data, &sc->lmc_device->stats, + sizeof(sc->lmc_device->stats)) || + copy_to_user(ifr->ifr_data + sizeof(sc->lmc_device->stats), + &sc->extra_stats, sizeof(sc->extra_stats))) + ret = -EFAULT; + else + ret = 0; + break; - case LMCIOCCLEARLMCSTATS: /*fold01*/ - if (!capable(CAP_NET_ADMIN)){ - ret = -EPERM; - break; - } + case LMCIOCCLEARLMCSTATS: + if (!capable(CAP_NET_ADMIN)) { + ret = -EPERM; + break; + } - memset (&sc->stats, 0, sizeof (struct lmc_statistics)); - sc->stats.check = STATCHECK; - sc->stats.version_size = (DRIVER_VERSION << 16) + - sizeof (struct lmc_statistics); - sc->stats.lmc_cardtype = sc->lmc_cardtype; - ret = 0; - break; + memset(&sc->lmc_device->stats, 0, sizeof(sc->lmc_device->stats)); + memset(&sc->extra_stats, 0, sizeof(sc->extra_stats)); + sc->extra_stats.check = STATCHECK; + sc->extra_stats.version_size = (DRIVER_VERSION << 16) + + sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats); + sc->extra_stats.lmc_cardtype = sc->lmc_cardtype; + ret = 0; + break; case LMCIOCSETCIRCUIT: /*fold01*/ if (!capable(CAP_NET_ADMIN)){ @@ -641,14 +621,12 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ /* the watchdog process that cruises around */ static void lmc_watchdog (unsigned long data) /*fold00*/ { - struct net_device *dev = (struct net_device *) data; - lmc_softc_t *sc; + struct net_device *dev = (struct net_device *)data; + lmc_softc_t *sc = dev_to_sc(dev); int link_status; u_int32_t ticks; unsigned long flags; - sc = dev->priv; - lmc_trace(dev, "lmc_watchdog in"); spin_lock_irqsave(&sc->lmc_lock, flags); @@ -677,22 +655,22 @@ static void lmc_watchdog (unsigned long data) /*fold00*/ * check for a transmit interrupt timeout * Has the packet xmt vs xmt serviced threshold been exceeded */ if (sc->lmc_taint_tx == sc->lastlmc_taint_tx && - sc->stats.tx_packets > sc->lasttx_packets && - sc->tx_TimeoutInd == 0) + sc->lmc_device->stats.tx_packets > sc->lasttx_packets && + sc->tx_TimeoutInd == 0) { /* wait for the watchdog to come around again */ sc->tx_TimeoutInd = 1; } else if (sc->lmc_taint_tx == sc->lastlmc_taint_tx && - sc->stats.tx_packets > sc->lasttx_packets && - sc->tx_TimeoutInd) + sc->lmc_device->stats.tx_packets > sc->lasttx_packets && + sc->tx_TimeoutInd) { LMC_EVENT_LOG(LMC_EVENT_XMTINTTMO, LMC_CSR_READ (sc, csr_status), 0); sc->tx_TimeoutDisplay = 1; - sc->stats.tx_TimeoutCnt++; + sc->extra_stats.tx_TimeoutCnt++; /* DEC chip is stuck, hit it with a RESET!!!! */ lmc_running_reset (dev); @@ -712,13 +690,11 @@ static void lmc_watchdog (unsigned long data) /*fold00*/ /* reset the transmit timeout detection flag */ sc->tx_TimeoutInd = 0; sc->lastlmc_taint_tx = sc->lmc_taint_tx; - sc->lasttx_packets = sc->stats.tx_packets; - } - else - { + sc->lasttx_packets = sc->lmc_device->stats.tx_packets; + } else { sc->tx_TimeoutInd = 0; sc->lastlmc_taint_tx = sc->lmc_taint_tx; - sc->lasttx_packets = sc->stats.tx_packets; + sc->lasttx_packets = sc->lmc_device->stats.tx_packets; } /* --- end time out check ----------------------------------- */ @@ -748,19 +724,7 @@ static void lmc_watchdog (unsigned long data) /*fold00*/ sc->last_link_status = 1; /* lmc_reset (sc); Again why reset??? */ - /* Inform the world that link protocol is back up. */ netif_carrier_on(dev); - - /* Now we have to tell the syncppp that we had an outage - * and that it should deal. Calling sppp_reopen here - * should do the trick, but we may have to call sppp_close - * when the link goes down, and call sppp_open here. - * Subject to more testing. - * --bbraun - */ - - lmc_proto_reopen(sc); - } /* Call media specific watchdog functions */ @@ -816,114 +780,93 @@ kick_timer: } -static void lmc_setup(struct net_device * const dev) /*fold00*/ +static int lmc_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) { - lmc_trace(dev, "lmc_setup in"); - - dev->type = ARPHRD_HDLC; - dev->hard_start_xmit = lmc_start_xmit; - dev->open = lmc_open; - dev->stop = lmc_close; - dev->get_stats = lmc_get_stats; - dev->do_ioctl = lmc_ioctl; - dev->tx_timeout = lmc_driver_timeout; - dev->watchdog_timeo = (HZ); /* 1 second */ - - lmc_trace(dev, "lmc_setup out"); + if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT) + return 0; + return -EINVAL; } - static int __devinit lmc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { - struct net_device *dev; - lmc_softc_t *sc; - u16 subdevice; - u_int16_t AdapModelNum; - int err = -ENOMEM; - static int cards_found; -#ifndef GCOM - /* We name by type not by vendor */ - static const char lmcname[] = "hdlc%d"; -#else - /* - * GCOM uses LMC vendor name so that clients can know which card - * to attach to. - */ - static const char lmcname[] = "lmc%d"; -#endif - - - /* - * Allocate our own device structure - */ - dev = alloc_netdev(sizeof(lmc_softc_t), lmcname, lmc_setup); - if (!dev) { - printk (KERN_ERR "lmc:alloc_netdev for device failed\n"); - goto out1; - } - - lmc_trace(dev, "lmc_init_one in"); - - err = pci_enable_device(pdev); - if (err) { - printk(KERN_ERR "lmc: pci enable failed:%d\n", err); - goto out2; - } - - if (pci_request_regions(pdev, "lmc")) { - printk(KERN_ERR "lmc: pci_request_region failed\n"); - err = -EIO; - goto out3; - } - - pci_set_drvdata(pdev, dev); - - if(lmc_first_load == 0){ - printk(KERN_INFO "Lan Media Corporation WAN Driver Version %d.%d.%d\n", - DRIVER_MAJOR_VERSION, DRIVER_MINOR_VERSION,DRIVER_SUB_VERSION); - lmc_first_load = 1; - } - - sc = dev->priv; - sc->lmc_device = dev; - sc->name = dev->name; - - /* Initialize the sppp layer */ - /* An ioctl can cause a subsequent detach for raw frame interface */ - dev->ml_priv = sc; - sc->if_type = LMC_PPP; - sc->check = 0xBEAFCAFE; - dev->base_addr = pci_resource_start(pdev, 0); - dev->irq = pdev->irq; - - SET_NETDEV_DEV(dev, &pdev->dev); - - /* - * This will get the protocol layer ready and do any 1 time init's - * Must have a valid sc and dev structure - */ - lmc_proto_init(sc); - - lmc_proto_attach(sc); + lmc_softc_t *sc; + struct net_device *dev; + u16 subdevice; + u16 AdapModelNum; + int err; + static int cards_found; + + /* lmc_trace(dev, "lmc_init_one in"); */ + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "lmc: pci enable failed: %d\n", err); + return err; + } - /* - * Why were we changing this??? - dev->tx_queue_len = 100; - */ + err = pci_request_regions(pdev, "lmc"); + if (err) { + printk(KERN_ERR "lmc: pci_request_region failed\n"); + goto err_req_io; + } - /* Init the spin lock so can call it latter */ + /* + * Allocate our own device structure + */ + sc = kzalloc(sizeof(lmc_softc_t), GFP_KERNEL); + if (!sc) { + err = -ENOMEM; + goto err_kzalloc; + } - spin_lock_init(&sc->lmc_lock); - pci_set_master(pdev); + dev = alloc_hdlcdev(sc); + if (!dev) { + printk(KERN_ERR "lmc:alloc_netdev for device failed\n"); + goto err_hdlcdev; + } - printk ("%s: detected at %lx, irq %d\n", dev->name, - dev->base_addr, dev->irq); - if (register_netdev (dev) != 0) { - printk (KERN_ERR "%s: register_netdev failed.\n", dev->name); - goto out4; - } + dev->type = ARPHRD_HDLC; + dev_to_hdlc(dev)->xmit = lmc_start_xmit; + dev_to_hdlc(dev)->attach = lmc_attach; + dev->open = lmc_open; + dev->stop = lmc_close; + dev->get_stats = lmc_get_stats; + dev->do_ioctl = lmc_ioctl; + dev->tx_timeout = lmc_driver_timeout; + dev->watchdog_timeo = HZ; /* 1 second */ + dev->tx_queue_len = 100; + sc->lmc_device = dev; + sc->name = dev->name; + sc->if_type = LMC_PPP; + sc->check = 0xBEAFCAFE; + dev->base_addr = pci_resource_start(pdev, 0); + dev->irq = pdev->irq; + pci_set_drvdata(pdev, dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + /* + * This will get the protocol layer ready and do any 1 time init's + * Must have a valid sc and dev structure + */ + lmc_proto_attach(sc); + + /* Init the spin lock so can call it latter */ + + spin_lock_init(&sc->lmc_lock); + pci_set_master(pdev); + + printk(KERN_INFO "%s: detected at %lx, irq %d\n", dev->name, + dev->base_addr, dev->irq); + + err = register_hdlc_device(dev); + if (err) { + printk(KERN_ERR "%s: register_netdev failed.\n", dev->name); + free_netdev(dev); + goto err_hdlcdev; + } sc->lmc_cardtype = LMC_CARDTYPE_UNKNOWN; sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT; @@ -939,27 +882,27 @@ static int __devinit lmc_init_one(struct pci_dev *pdev, switch (subdevice) { case PCI_DEVICE_ID_LMC_HSSI: - printk ("%s: LMC HSSI\n", dev->name); + printk(KERN_INFO "%s: LMC HSSI\n", dev->name); sc->lmc_cardtype = LMC_CARDTYPE_HSSI; sc->lmc_media = &lmc_hssi_media; break; case PCI_DEVICE_ID_LMC_DS3: - printk ("%s: LMC DS3\n", dev->name); + printk(KERN_INFO "%s: LMC DS3\n", dev->name); sc->lmc_cardtype = LMC_CARDTYPE_DS3; sc->lmc_media = &lmc_ds3_media; break; case PCI_DEVICE_ID_LMC_SSI: - printk ("%s: LMC SSI\n", dev->name); + printk(KERN_INFO "%s: LMC SSI\n", dev->name); sc->lmc_cardtype = LMC_CARDTYPE_SSI; sc->lmc_media = &lmc_ssi_media; break; case PCI_DEVICE_ID_LMC_T1: - printk ("%s: LMC T1\n", dev->name); + printk(KERN_INFO "%s: LMC T1\n", dev->name); sc->lmc_cardtype = LMC_CARDTYPE_T1; sc->lmc_media = &lmc_t1_media; break; default: - printk (KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name); + printk(KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name); break; } @@ -977,32 +920,28 @@ static int __devinit lmc_init_one(struct pci_dev *pdev, */ AdapModelNum = (lmc_mii_readreg (sc, 0, 3) & 0x3f0) >> 4; - if ((AdapModelNum == LMC_ADAP_T1 - && subdevice == PCI_DEVICE_ID_LMC_T1) || /* detect LMC1200 */ - (AdapModelNum == LMC_ADAP_SSI - && subdevice == PCI_DEVICE_ID_LMC_SSI) || /* detect LMC1000 */ - (AdapModelNum == LMC_ADAP_DS3 - && subdevice == PCI_DEVICE_ID_LMC_DS3) || /* detect LMC5245 */ - (AdapModelNum == LMC_ADAP_HSSI - && subdevice == PCI_DEVICE_ID_LMC_HSSI)) - { /* detect LMC5200 */ + if ((AdapModelNum != LMC_ADAP_T1 || /* detect LMC1200 */ + subdevice != PCI_DEVICE_ID_LMC_T1) && + (AdapModelNum != LMC_ADAP_SSI || /* detect LMC1000 */ + subdevice != PCI_DEVICE_ID_LMC_SSI) && + (AdapModelNum != LMC_ADAP_DS3 || /* detect LMC5245 */ + subdevice != PCI_DEVICE_ID_LMC_DS3) && + (AdapModelNum != LMC_ADAP_HSSI || /* detect LMC5200 */ + subdevice != PCI_DEVICE_ID_LMC_HSSI)) + printk(KERN_WARNING "%s: Model number (%d) miscompare for PCI" + " Subsystem ID = 0x%04x\n", + dev->name, AdapModelNum, subdevice); - } - else { - printk ("%s: Model number (%d) miscompare for PCI Subsystem ID = 0x%04x\n", - dev->name, AdapModelNum, subdevice); -// return (NULL); - } /* * reset clock */ LMC_CSR_WRITE (sc, csr_gp_timer, 0xFFFFFFFFUL); sc->board_idx = cards_found++; - sc->stats.check = STATCHECK; - sc->stats.version_size = (DRIVER_VERSION << 16) + - sizeof (struct lmc_statistics); - sc->stats.lmc_cardtype = sc->lmc_cardtype; + sc->extra_stats.check = STATCHECK; + sc->extra_stats.version_size = (DRIVER_VERSION << 16) + + sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats); + sc->extra_stats.lmc_cardtype = sc->lmc_cardtype; sc->lmc_ok = 0; sc->last_link_status = 0; @@ -1010,58 +949,51 @@ static int __devinit lmc_init_one(struct pci_dev *pdev, lmc_trace(dev, "lmc_init_one out"); return 0; - out4: - lmc_proto_detach(sc); - out3: - if (pdev) { - pci_release_regions(pdev); - pci_set_drvdata(pdev, NULL); - } - out2: - free_netdev(dev); - out1: - return err; +err_hdlcdev: + pci_set_drvdata(pdev, NULL); + kfree(sc); +err_kzalloc: + pci_release_regions(pdev); +err_req_io: + pci_disable_device(pdev); + return err; } /* * Called from pci when removing module. */ -static void __devexit lmc_remove_one (struct pci_dev *pdev) +static void __devexit lmc_remove_one(struct pci_dev *pdev) { - struct net_device *dev = pci_get_drvdata(pdev); - - if (dev) { - lmc_softc_t *sc = dev->priv; - - printk("%s: removing...\n", dev->name); - lmc_proto_detach(sc); - unregister_netdev(dev); - free_netdev(dev); - pci_release_regions(pdev); - pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); - } + struct net_device *dev = pci_get_drvdata(pdev); + + if (dev) { + printk(KERN_DEBUG "%s: removing...\n", dev->name); + unregister_hdlc_device(dev); + free_netdev(dev); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + } } /* After this is called, packets can be sent. * Does not initialize the addresses */ -static int lmc_open (struct net_device *dev) /*fold00*/ +static int lmc_open(struct net_device *dev) { - lmc_softc_t *sc = dev->priv; + lmc_softc_t *sc = dev_to_sc(dev); + int err; lmc_trace(dev, "lmc_open in"); lmc_led_on(sc, LMC_DS3_LED0); - lmc_dec_reset (sc); - lmc_reset (sc); - - LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0); - LMC_EVENT_LOG(LMC_EVENT_RESET2, - lmc_mii_readreg (sc, 0, 16), - lmc_mii_readreg (sc, 0, 17)); + lmc_dec_reset(sc); + lmc_reset(sc); + LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ(sc, csr_status), 0); + LMC_EVENT_LOG(LMC_EVENT_RESET2, lmc_mii_readreg(sc, 0, 16), + lmc_mii_readreg(sc, 0, 17)); if (sc->lmc_ok){ lmc_trace(dev, "lmc_open lmc_ok out"); @@ -1106,14 +1038,14 @@ static int lmc_open (struct net_device *dev) /*fold00*/ /* dev->flags |= IFF_UP; */ - lmc_proto_open(sc); + if ((err = lmc_proto_open(sc)) != 0) + return err; dev->do_ioctl = lmc_ioctl; netif_start_queue(dev); - - sc->stats.tx_tbusy0++ ; + sc->extra_stats.tx_tbusy0++; /* * select what interrupts we want to get @@ -1165,8 +1097,7 @@ static int lmc_open (struct net_device *dev) /*fold00*/ static void lmc_running_reset (struct net_device *dev) /*fold00*/ { - - lmc_softc_t *sc = (lmc_softc_t *) dev->priv; + lmc_softc_t *sc = dev_to_sc(dev); lmc_trace(dev, "lmc_runnig_reset in"); @@ -1184,7 +1115,7 @@ static void lmc_running_reset (struct net_device *dev) /*fold00*/ netif_wake_queue(dev); sc->lmc_txfull = 0; - sc->stats.tx_tbusy0++ ; + sc->extra_stats.tx_tbusy0++; sc->lmc_intrmask = TULIP_DEFAULT_INTR_MASK; LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask); @@ -1200,14 +1131,13 @@ static void lmc_running_reset (struct net_device *dev) /*fold00*/ * This disables the timer for the watchdog and keepalives, * and disables the irq for dev. */ -static int lmc_close (struct net_device *dev) /*fold00*/ +static int lmc_close(struct net_device *dev) { /* not calling release_region() as we should */ - lmc_softc_t *sc; + lmc_softc_t *sc = dev_to_sc(dev); lmc_trace(dev, "lmc_close in"); - - sc = dev->priv; + sc->lmc_ok = 0; sc->lmc_media->set_link_status (sc, 0); del_timer (&sc->timer); @@ -1215,7 +1145,7 @@ static int lmc_close (struct net_device *dev) /*fold00*/ lmc_ifdown (dev); lmc_trace(dev, "lmc_close out"); - + return 0; } @@ -1223,16 +1153,16 @@ static int lmc_close (struct net_device *dev) /*fold00*/ /* When the interface goes down, this is called */ static int lmc_ifdown (struct net_device *dev) /*fold00*/ { - lmc_softc_t *sc = dev->priv; + lmc_softc_t *sc = dev_to_sc(dev); u32 csr6; int i; lmc_trace(dev, "lmc_ifdown in"); - + /* Don't let anything else go on right now */ // dev->start = 0; netif_stop_queue(dev); - sc->stats.tx_tbusy1++ ; + sc->extra_stats.tx_tbusy1++; /* stop interrupts */ /* Clear the interrupt mask */ @@ -1244,8 +1174,8 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/ csr6 &= ~LMC_DEC_SR; /* Turn off the Receive bit */ LMC_CSR_WRITE (sc, csr_command, csr6); - sc->stats.rx_missed_errors += - LMC_CSR_READ (sc, csr_missed_frames) & 0xffff; + sc->lmc_device->stats.rx_missed_errors += + LMC_CSR_READ(sc, csr_missed_frames) & 0xffff; /* release the interrupt */ if(sc->got_irq == 1){ @@ -1276,7 +1206,7 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/ lmc_led_off (sc, LMC_MII16_LED_ALL); netif_wake_queue(dev); - sc->stats.tx_tbusy0++ ; + sc->extra_stats.tx_tbusy0++; lmc_trace(dev, "lmc_ifdown out"); @@ -1289,7 +1219,7 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/ { struct net_device *dev = (struct net_device *) dev_instance; - lmc_softc_t *sc; + lmc_softc_t *sc = dev_to_sc(dev); u32 csr; int i; s32 stat; @@ -1300,8 +1230,6 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/ lmc_trace(dev, "lmc_interrupt in"); - sc = dev->priv; - spin_lock(&sc->lmc_lock); /* @@ -1354,7 +1282,7 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/ int n_compl = 0 ; /* reset the transmit timeout detection flag -baz */ - sc->stats.tx_NoCompleteCnt = 0; + sc->extra_stats.tx_NoCompleteCnt = 0; badtx = sc->lmc_taint_tx; i = badtx % LMC_TXDESCS; @@ -1378,27 +1306,25 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/ if (sc->lmc_txq[i] == NULL) continue; - /* - * Check the total error summary to look for any errors - */ - if (stat & 0x8000) { - sc->stats.tx_errors++; - if (stat & 0x4104) - sc->stats.tx_aborted_errors++; - if (stat & 0x0C00) - sc->stats.tx_carrier_errors++; - if (stat & 0x0200) - sc->stats.tx_window_errors++; - if (stat & 0x0002) - sc->stats.tx_fifo_errors++; - } - else { - - sc->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff; - - sc->stats.tx_packets++; + /* + * Check the total error summary to look for any errors + */ + if (stat & 0x8000) { + sc->lmc_device->stats.tx_errors++; + if (stat & 0x4104) + sc->lmc_device->stats.tx_aborted_errors++; + if (stat & 0x0C00) + sc->lmc_device->stats.tx_carrier_errors++; + if (stat & 0x0200) + sc->lmc_device->stats.tx_window_errors++; + if (stat & 0x0002) + sc->lmc_device->stats.tx_fifo_errors++; + } else { + sc->lmc_device->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff; + + sc->lmc_device->stats.tx_packets++; } - + // dev_kfree_skb(sc->lmc_txq[i]); dev_kfree_skb_irq(sc->lmc_txq[i]); sc->lmc_txq[i] = NULL; @@ -1415,13 +1341,13 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/ LMC_EVENT_LOG(LMC_EVENT_TBUSY0, n_compl, 0); sc->lmc_txfull = 0; netif_wake_queue(dev); - sc->stats.tx_tbusy0++ ; + sc->extra_stats.tx_tbusy0++; #ifdef DEBUG - sc->stats.dirtyTx = badtx; - sc->stats.lmc_next_tx = sc->lmc_next_tx; - sc->stats.lmc_txfull = sc->lmc_txfull; + sc->extra_stats.dirtyTx = badtx; + sc->extra_stats.lmc_next_tx = sc->lmc_next_tx; + sc->extra_stats.lmc_txfull = sc->lmc_txfull; #endif sc->lmc_taint_tx = badtx; @@ -1476,9 +1402,9 @@ lmc_int_fail_out: return IRQ_RETVAL(handled); } -static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00*/ +static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev) { - lmc_softc_t *sc; + lmc_softc_t *sc = dev_to_sc(dev); u32 flag; int entry; int ret = 0; @@ -1486,8 +1412,6 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00 lmc_trace(dev, "lmc_start_xmit in"); - sc = dev->priv; - spin_lock_irqsave(&sc->lmc_lock, flags); /* normal path, tbusy known to be zero */ @@ -1532,8 +1456,8 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00 if (sc->lmc_next_tx - sc->lmc_taint_tx >= LMC_TXDESCS - 1) { /* ring full, go busy */ sc->lmc_txfull = 1; - netif_stop_queue(dev); - sc->stats.tx_tbusy1++ ; + netif_stop_queue(dev); + sc->extra_stats.tx_tbusy1++; LMC_EVENT_LOG(LMC_EVENT_TBUSY1, entry, 0); } #endif @@ -1550,7 +1474,7 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00 * the watchdog timer handler. -baz */ - sc->stats.tx_NoCompleteCnt++; + sc->extra_stats.tx_NoCompleteCnt++; sc->lmc_next_tx++; /* give ownership to the chip */ @@ -1569,9 +1493,9 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00 } -static int lmc_rx (struct net_device *dev) /*fold00*/ +static int lmc_rx(struct net_device *dev) { - lmc_softc_t *sc; + lmc_softc_t *sc = dev_to_sc(dev); int i; int rx_work_limit = LMC_RXDESCS; unsigned int next_rx; @@ -1583,8 +1507,6 @@ static int lmc_rx (struct net_device *dev) /*fold00*/ lmc_trace(dev, "lmc_rx in"); - sc = dev->priv; - lmc_led_on(sc, LMC_DS3_LED3); rxIntLoopCnt = 0; /* debug -baz */ @@ -1597,39 +1519,38 @@ static int lmc_rx (struct net_device *dev) /*fold00*/ rxIntLoopCnt++; /* debug -baz */ len = ((stat & LMC_RDES_FRAME_LENGTH) >> RDES_FRAME_LENGTH_BIT_NUMBER); if ((stat & 0x0300) != 0x0300) { /* Check first segment and last segment */ - if ((stat & 0x0000ffff) != 0x7fff) { - /* Oversized frame */ - sc->stats.rx_length_errors++; - goto skip_packet; - } - } - - if(stat & 0x00000008){ /* Catch a dribbling bit error */ - sc->stats.rx_errors++; - sc->stats.rx_frame_errors++; - goto skip_packet; - } + if ((stat & 0x0000ffff) != 0x7fff) { + /* Oversized frame */ + sc->lmc_device->stats.rx_length_errors++; + goto skip_packet; + } + } + if (stat & 0x00000008) { /* Catch a dribbling bit error */ + sc->lmc_device->stats.rx_errors++; + sc->lmc_device->stats.rx_frame_errors++; + goto skip_packet; + } - if(stat & 0x00000004){ /* Catch a CRC error by the Xilinx */ - sc->stats.rx_errors++; - sc->stats.rx_crc_errors++; - goto skip_packet; - } + if (stat & 0x00000004) { /* Catch a CRC error by the Xilinx */ + sc->lmc_device->stats.rx_errors++; + sc->lmc_device->stats.rx_crc_errors++; + goto skip_packet; + } - if (len > LMC_PKT_BUF_SZ){ - sc->stats.rx_length_errors++; - localLengthErrCnt++; - goto skip_packet; - } + if (len > LMC_PKT_BUF_SZ) { + sc->lmc_device->stats.rx_length_errors++; + localLengthErrCnt++; + goto skip_packet; + } - if (len < sc->lmc_crcSize + 2) { - sc->stats.rx_length_errors++; - sc->stats.rx_SmallPktCnt++; - localLengthErrCnt++; - goto skip_packet; - } + if (len < sc->lmc_crcSize + 2) { + sc->lmc_device->stats.rx_length_errors++; + sc->extra_stats.rx_SmallPktCnt++; + localLengthErrCnt++; + goto skip_packet; + } if(stat & 0x00004000){ printk(KERN_WARNING "%s: Receiver descriptor error, receiver out of sync?\n", dev->name); @@ -1656,8 +1577,8 @@ static int lmc_rx (struct net_device *dev) /*fold00*/ } dev->last_rx = jiffies; - sc->stats.rx_packets++; - sc->stats.rx_bytes += len; + sc->lmc_device->stats.rx_packets++; + sc->lmc_device->stats.rx_bytes += len; LMC_CONSOLE_LOG("recv", skb->data, len); @@ -1679,7 +1600,6 @@ static int lmc_rx (struct net_device *dev) /*fold00*/ skb_put (skb, len); skb->protocol = lmc_proto_type(sc, skb); - skb->protocol = htons(ETH_P_WAN_PPP); skb_reset_mac_header(skb); /* skb_reset_network_header(skb); */ skb->dev = dev; @@ -1704,7 +1624,7 @@ static int lmc_rx (struct net_device *dev) /*fold00*/ * in which care we'll try to allocate the buffer * again. (once a second) */ - sc->stats.rx_BuffAllocErr++; + sc->extra_stats.rx_BuffAllocErr++; LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len); sc->failed_recv_alloc = 1; goto skip_out_of_mem; @@ -1739,16 +1659,14 @@ static int lmc_rx (struct net_device *dev) /*fold00*/ * descriptors with bogus packets * if (localLengthErrCnt > LMC_RXDESCS - 3) { - sc->stats.rx_BadPktSurgeCnt++; - LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE, - localLengthErrCnt, - sc->stats.rx_BadPktSurgeCnt); + sc->extra_stats.rx_BadPktSurgeCnt++; + LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE, localLengthErrCnt, + sc->extra_stats.rx_BadPktSurgeCnt); } */ /* save max count of receive descriptors serviced */ - if (rxIntLoopCnt > sc->stats.rxIntLoopCnt) { - sc->stats.rxIntLoopCnt = rxIntLoopCnt; /* debug -baz */ - } + if (rxIntLoopCnt > sc->extra_stats.rxIntLoopCnt) + sc->extra_stats.rxIntLoopCnt = rxIntLoopCnt; /* debug -baz */ #ifdef DEBUG if (rxIntLoopCnt == 0) @@ -1775,23 +1693,22 @@ skip_out_of_mem: return 0; } -static struct net_device_stats *lmc_get_stats (struct net_device *dev) /*fold00*/ +static struct net_device_stats *lmc_get_stats(struct net_device *dev) { - lmc_softc_t *sc = dev->priv; + lmc_softc_t *sc = dev_to_sc(dev); unsigned long flags; lmc_trace(dev, "lmc_get_stats in"); - spin_lock_irqsave(&sc->lmc_lock, flags); - sc->stats.rx_missed_errors += LMC_CSR_READ (sc, csr_missed_frames) & 0xffff; + sc->lmc_device->stats.rx_missed_errors += LMC_CSR_READ(sc, csr_missed_frames) & 0xffff; spin_unlock_irqrestore(&sc->lmc_lock, flags); lmc_trace(dev, "lmc_get_stats out"); - return (struct net_device_stats *) &sc->stats; + return &sc->lmc_device->stats; } static struct pci_driver lmc_driver = { @@ -1970,7 +1887,7 @@ static void lmc_softreset (lmc_softc_t * const sc) /*fold00*/ { if (sc->lmc_txq[i] != NULL){ /* have buffer */ dev_kfree_skb(sc->lmc_txq[i]); /* free it */ - sc->stats.tx_dropped++; /* We just dropped a packet */ + sc->lmc_device->stats.tx_dropped++; /* We just dropped a packet */ } sc->lmc_txq[i] = NULL; sc->lmc_txring[i].status = 0x00000000; @@ -2061,7 +1978,7 @@ static void lmc_reset(lmc_softc_t * const sc) /*fold00*/ */ sc->lmc_media->init(sc); - sc->stats.resetCount++; + sc->extra_stats.resetCount++; lmc_trace(sc->lmc_device, "lmc_reset out"); } @@ -2151,23 +2068,21 @@ static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, /*fold00 lmc_trace(sc->lmc_device, "lmc_initcsrs out"); } -static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/ - lmc_softc_t *sc; +static void lmc_driver_timeout(struct net_device *dev) +{ + lmc_softc_t *sc = dev_to_sc(dev); u32 csr6; unsigned long flags; lmc_trace(dev, "lmc_driver_timeout in"); - sc = dev->priv; - spin_lock_irqsave(&sc->lmc_lock, flags); printk("%s: Xmitter busy|\n", dev->name); - sc->stats.tx_tbusy_calls++ ; - if (jiffies - dev->trans_start < TX_TIMEOUT) { - goto bug_out; - } + sc->extra_stats.tx_tbusy_calls++; + if (jiffies - dev->trans_start < TX_TIMEOUT) + goto bug_out; /* * Chip seems to have locked up @@ -2178,7 +2093,7 @@ static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/ LMC_EVENT_LOG(LMC_EVENT_XMTPRCTMO, LMC_CSR_READ (sc, csr_status), - sc->stats.tx_ProcTimeout); + sc->extra_stats.tx_ProcTimeout); lmc_running_reset (dev); @@ -2195,8 +2110,8 @@ static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/ /* immediate transmit */ LMC_CSR_WRITE (sc, csr_txpoll, 0); - sc->stats.tx_errors++; - sc->stats.tx_ProcTimeout++; /* -baz */ + sc->lmc_device->stats.tx_errors++; + sc->extra_stats.tx_ProcTimeout++; /* -baz */ dev->trans_start = jiffies; diff --git a/drivers/net/wan/lmc/lmc_media.c b/drivers/net/wan/lmc/lmc_media.c index 1cc5834ebbc2..2e0711a956cc 100644 --- a/drivers/net/wan/lmc/lmc_media.c +++ b/drivers/net/wan/lmc/lmc_media.c @@ -425,7 +425,7 @@ lmc_ds3_set_scram (lmc_softc_t * const sc, int ie) static int lmc_ds3_get_link_status (lmc_softc_t * const sc) { - u_int16_t link_status, link_status_11; + u16 link_status, link_status_11; int ret = 1; lmc_mii_writereg (sc, 0, 17, 7); @@ -447,7 +447,7 @@ lmc_ds3_get_link_status (lmc_softc_t * const sc) (link_status & LMC_FRAMER_REG0_OOFS)){ ret = 0; if(sc->last_led_err[3] != 1){ - u16 r1; + u16 r1; lmc_mii_writereg (sc, 0, 17, 01); /* Turn on Xbit error as our cisco does */ r1 = lmc_mii_readreg (sc, 0, 18); r1 &= 0xfe; @@ -460,7 +460,7 @@ lmc_ds3_get_link_status (lmc_softc_t * const sc) else { lmc_led_off(sc, LMC_DS3_LED3); /* turn on red LED */ if(sc->last_led_err[3] == 1){ - u16 r1; + u16 r1; lmc_mii_writereg (sc, 0, 17, 01); /* Turn off Xbit error */ r1 = lmc_mii_readreg (sc, 0, 18); r1 |= 0x01; @@ -538,20 +538,19 @@ lmc_ds3_watchdog (lmc_softc_t * const sc) * SSI methods */ -static void -lmc_ssi_init (lmc_softc_t * const sc) +static void lmc_ssi_init(lmc_softc_t * const sc) { - u_int16_t mii17; - int cable; + u16 mii17; + int cable; - sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1000; + sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1000; - mii17 = lmc_mii_readreg (sc, 0, 17); + mii17 = lmc_mii_readreg(sc, 0, 17); - cable = (mii17 & LMC_MII17_SSI_CABLE_MASK) >> LMC_MII17_SSI_CABLE_SHIFT; - sc->ictl.cable_type = cable; + cable = (mii17 & LMC_MII17_SSI_CABLE_MASK) >> LMC_MII17_SSI_CABLE_SHIFT; + sc->ictl.cable_type = cable; - lmc_gpio_mkoutput (sc, LMC_GEP_SSI_TXCLOCK); + lmc_gpio_mkoutput(sc, LMC_GEP_SSI_TXCLOCK); } static void @@ -679,11 +678,11 @@ lmc_ssi_set_speed (lmc_softc_t * const sc, lmc_ctl_t * ctl) static int lmc_ssi_get_link_status (lmc_softc_t * const sc) { - u_int16_t link_status; + u16 link_status; u_int32_t ticks; int ret = 1; int hw_hdsk = 1; - + /* * missing CTS? Hmm. If we require CTS on, we may never get the * link to come up, so omit it in this test. @@ -718,9 +717,9 @@ lmc_ssi_get_link_status (lmc_softc_t * const sc) } else if (ticks == 0 ) { /* no clock found ? */ ret = 0; - if(sc->last_led_err[3] != 1){ - sc->stats.tx_lossOfClockCnt++; - printk(KERN_WARNING "%s: Lost Clock, Link Down\n", sc->name); + if (sc->last_led_err[3] != 1) { + sc->extra_stats.tx_lossOfClockCnt++; + printk(KERN_WARNING "%s: Lost Clock, Link Down\n", sc->name); } sc->last_led_err[3] = 1; lmc_led_on (sc, LMC_MII16_LED3); /* turn ON red LED */ @@ -885,19 +884,13 @@ write_av9110 (lmc_softc_t * sc, u_int32_t n, u_int32_t m, u_int32_t v, | LMC_GEP_SSI_GENERATOR)); } -static void -lmc_ssi_watchdog (lmc_softc_t * const sc) +static void lmc_ssi_watchdog(lmc_softc_t * const sc) { - u_int16_t mii17 = lmc_mii_readreg (sc, 0, 17); - if (((mii17 >> 3) & 7) == 7) - { - lmc_led_off (sc, LMC_MII16_LED2); - } - else - { - lmc_led_on (sc, LMC_MII16_LED2); - } - + u16 mii17 = lmc_mii_readreg(sc, 0, 17); + if (((mii17 >> 3) & 7) == 7) + lmc_led_off(sc, LMC_MII16_LED2); + else + lmc_led_on(sc, LMC_MII16_LED2); } /* @@ -927,7 +920,7 @@ lmc_t1_read (lmc_softc_t * const sc, int a) static void lmc_t1_init (lmc_softc_t * const sc) { - u_int16_t mii16; + u16 mii16; int i; sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1200; @@ -1026,7 +1019,7 @@ lmc_t1_set_status (lmc_softc_t * const sc, lmc_ctl_t * ctl) */ static int lmc_t1_get_link_status (lmc_softc_t * const sc) { - u_int16_t link_status; + u16 link_status; int ret = 1; /* LMC5245 (DS3) & LMC1200 (DS1) LED definitions diff --git a/drivers/net/wan/lmc/lmc_proto.c b/drivers/net/wan/lmc/lmc_proto.c index 85315758198d..be9877ff551e 100644 --- a/drivers/net/wan/lmc/lmc_proto.c +++ b/drivers/net/wan/lmc/lmc_proto.c @@ -36,9 +36,6 @@ #include #include #include - -#include - #include /* Processor type for cache alignment. */ #include #include @@ -50,48 +47,6 @@ #include "lmc_ioctl.h" #include "lmc_proto.h" -/* - * The compile-time variable SPPPSTUP causes the module to be - * compiled without referencing any of the sync ppp routines. - */ -#ifdef SPPPSTUB -#define SPPP_detach(d) (void)0 -#define SPPP_open(d) 0 -#define SPPP_reopen(d) (void)0 -#define SPPP_close(d) (void)0 -#define SPPP_attach(d) (void)0 -#define SPPP_do_ioctl(d,i,c) -EOPNOTSUPP -#else -#define SPPP_attach(x) sppp_attach((x)->pd) -#define SPPP_detach(x) sppp_detach((x)->pd->dev) -#define SPPP_open(x) sppp_open((x)->pd->dev) -#define SPPP_reopen(x) sppp_reopen((x)->pd->dev) -#define SPPP_close(x) sppp_close((x)->pd->dev) -#define SPPP_do_ioctl(x, y, z) sppp_do_ioctl((x)->pd->dev, (y), (z)) -#endif - -// init -void lmc_proto_init(lmc_softc_t *sc) /*FOLD00*/ -{ - lmc_trace(sc->lmc_device, "lmc_proto_init in"); - switch(sc->if_type){ - case LMC_PPP: - sc->pd = kmalloc(sizeof(struct ppp_device), GFP_KERNEL); - if (!sc->pd) { - printk("lmc_proto_init(): kmalloc failure!\n"); - return; - } - sc->pd->dev = sc->lmc_device; - sc->if_ptr = sc->pd; - break; - case LMC_RAW: - break; - default: - break; - } - lmc_trace(sc->lmc_device, "lmc_proto_init out"); -} - // attach void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/ { @@ -100,7 +55,6 @@ void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/ case LMC_PPP: { struct net_device *dev = sc->lmc_device; - SPPP_attach(sc); dev->do_ioctl = lmc_ioctl; } break; @@ -108,7 +62,7 @@ void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/ { struct net_device *dev = sc->lmc_device; /* - * They set a few basics because they don't use sync_ppp + * They set a few basics because they don't use HDLC */ dev->flags |= IFF_POINTOPOINT; @@ -124,88 +78,39 @@ void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/ lmc_trace(sc->lmc_device, "lmc_proto_attach out"); } -// detach -void lmc_proto_detach(lmc_softc_t *sc) /*FOLD00*/ +int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd) { - switch(sc->if_type){ - case LMC_PPP: - SPPP_detach(sc); - break; - case LMC_RAW: /* Tell someone we're detaching? */ - break; - default: - break; - } - + lmc_trace(sc->lmc_device, "lmc_proto_ioctl"); + if (sc->if_type == LMC_PPP) + return hdlc_ioctl(sc->lmc_device, ifr, cmd); + return -EOPNOTSUPP; } -// reopen -void lmc_proto_reopen(lmc_softc_t *sc) /*FOLD00*/ +int lmc_proto_open(lmc_softc_t *sc) { - lmc_trace(sc->lmc_device, "lmc_proto_reopen in"); - switch(sc->if_type){ - case LMC_PPP: - SPPP_reopen(sc); - break; - case LMC_RAW: /* Reset the interface after being down, prerape to receive packets again */ - break; - default: - break; - } - lmc_trace(sc->lmc_device, "lmc_proto_reopen out"); -} + int ret = 0; + lmc_trace(sc->lmc_device, "lmc_proto_open in"); -// ioctl -int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd) /*FOLD00*/ -{ - lmc_trace(sc->lmc_device, "lmc_proto_ioctl out"); - switch(sc->if_type){ - case LMC_PPP: - return SPPP_do_ioctl (sc, ifr, cmd); - break; - default: - return -EOPNOTSUPP; - break; - } - lmc_trace(sc->lmc_device, "lmc_proto_ioctl out"); + if (sc->if_type == LMC_PPP) { + ret = hdlc_open(sc->lmc_device); + if (ret < 0) + printk(KERN_WARNING "%s: HDLC open failed: %d\n", + sc->name, ret); + } + + lmc_trace(sc->lmc_device, "lmc_proto_open out"); + return ret; } -// open -void lmc_proto_open(lmc_softc_t *sc) /*FOLD00*/ +void lmc_proto_close(lmc_softc_t *sc) { - int ret; + lmc_trace(sc->lmc_device, "lmc_proto_close in"); - lmc_trace(sc->lmc_device, "lmc_proto_open in"); - switch(sc->if_type){ - case LMC_PPP: - ret = SPPP_open(sc); - if(ret < 0) - printk("%s: syncPPP open failed: %d\n", sc->name, ret); - break; - case LMC_RAW: /* We're about to start getting packets! */ - break; - default: - break; - } - lmc_trace(sc->lmc_device, "lmc_proto_open out"); -} - -// close + if (sc->if_type == LMC_PPP) + hdlc_close(sc->lmc_device); -void lmc_proto_close(lmc_softc_t *sc) /*FOLD00*/ -{ - lmc_trace(sc->lmc_device, "lmc_proto_close in"); - switch(sc->if_type){ - case LMC_PPP: - SPPP_close(sc); - break; - case LMC_RAW: /* Interface going down */ - break; - default: - break; - } - lmc_trace(sc->lmc_device, "lmc_proto_close out"); + lmc_trace(sc->lmc_device, "lmc_proto_close out"); } __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/ @@ -213,8 +118,8 @@ __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/ lmc_trace(sc->lmc_device, "lmc_proto_type in"); switch(sc->if_type){ case LMC_PPP: - return htons(ETH_P_WAN_PPP); - break; + return hdlc_type_trans(skb, sc->lmc_device); + break; case LMC_NET: return htons(ETH_P_802_2); break; @@ -245,4 +150,3 @@ void lmc_proto_netif(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/ } lmc_trace(sc->lmc_device, "lmc_proto_netif out"); } - diff --git a/drivers/net/wan/lmc/lmc_proto.h b/drivers/net/wan/lmc/lmc_proto.h index ccaa69e8b3c7..662148c54644 100644 --- a/drivers/net/wan/lmc/lmc_proto.h +++ b/drivers/net/wan/lmc/lmc_proto.h @@ -1,16 +1,18 @@ #ifndef _LMC_PROTO_H_ #define _LMC_PROTO_H_ -void lmc_proto_init(lmc_softc_t *sc); +#include + void lmc_proto_attach(lmc_softc_t *sc); -void lmc_proto_detach(lmc_softc_t *sc); -void lmc_proto_reopen(lmc_softc_t *sc); int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd); -void lmc_proto_open(lmc_softc_t *sc); +int lmc_proto_open(lmc_softc_t *sc); void lmc_proto_close(lmc_softc_t *sc); __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb); void lmc_proto_netif(lmc_softc_t *sc, struct sk_buff *skb); -int lmc_skb_rawpackets(char *buf, char **start, off_t offset, int len, int unused); -#endif +static inline lmc_softc_t* dev_to_sc(struct net_device *dev) +{ + return (lmc_softc_t *)dev_to_hdlc(dev)->priv; +} +#endif diff --git a/drivers/net/wan/lmc/lmc_var.h b/drivers/net/wan/lmc/lmc_var.h index 6d003a39bfad..52e044209d50 100644 --- a/drivers/net/wan/lmc/lmc_var.h +++ b/drivers/net/wan/lmc/lmc_var.h @@ -1,8 +1,6 @@ #ifndef _LMC_VAR_H_ #define _LMC_VAR_H_ -/* $Id: lmc_var.h,v 1.17 2000/04/06 12:16:47 asj Exp $ */ - /* * Copyright (c) 1997-2000 LAN Media Corporation (LMC) * All rights reserved. www.lanmedia.com @@ -19,23 +17,6 @@ #include -#ifndef __KERNEL__ -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - -#define BITS_PER_LONG 32 - -#endif - /* * basic definitions used in lmc include files */ @@ -45,9 +26,6 @@ typedef struct lmc___media lmc_media_t; typedef struct lmc___ctl lmc_ctl_t; #define lmc_csrptr_t unsigned long -#define u_int16_t u16 -#define u_int8_t u8 -#define tulip_uint32_t u32 #define LMC_REG_RANGE 0x80 @@ -244,46 +222,8 @@ struct lmc___media { #define STATCHECK 0xBEEFCAFE -/* Included in this structure are first - * - standard net_device_stats - * - some other counters used for debug and driver performance - * evaluation -baz - */ -struct lmc_statistics +struct lmc_extra_statistics { - unsigned long rx_packets; /* total packets received */ - unsigned long tx_packets; /* total packets transmitted */ - unsigned long rx_bytes; - unsigned long tx_bytes; - - unsigned long rx_errors; /* bad packets received */ - unsigned long tx_errors; /* packet transmit problems */ - unsigned long rx_dropped; /* no space in linux buffers */ - unsigned long tx_dropped; /* no space available in linux */ - unsigned long multicast; /* multicast packets received */ - unsigned long collisions; - - /* detailed rx_errors: */ - unsigned long rx_length_errors; - unsigned long rx_over_errors; /* receiver ring buff overflow */ - unsigned long rx_crc_errors; /* recved pkt with crc error */ - unsigned long rx_frame_errors; /* recv'd frame alignment error */ - unsigned long rx_fifo_errors; /* recv'r fifo overrun */ - unsigned long rx_missed_errors; /* receiver missed packet */ - - /* detailed tx_errors */ - unsigned long tx_aborted_errors; - unsigned long tx_carrier_errors; - unsigned long tx_fifo_errors; - unsigned long tx_heartbeat_errors; - unsigned long tx_window_errors; - - /* for cslip etc */ - unsigned long rx_compressed; - unsigned long tx_compressed; - - /* ------------------------------------- - * Custom stats & counters follow -baz */ u_int32_t version_size; u_int32_t lmc_cardtype; @@ -325,27 +265,26 @@ struct lmc_statistics u_int32_t check; }; - typedef struct lmc_xinfo { - u_int32_t Magic0; /* BEEFCAFE */ + u_int32_t Magic0; /* BEEFCAFE */ - u_int32_t PciCardType; - u_int32_t PciSlotNumber; /* PCI slot number */ + u_int32_t PciCardType; + u_int32_t PciSlotNumber; /* PCI slot number */ - u_int16_t DriverMajorVersion; - u_int16_t DriverMinorVersion; - u_int16_t DriverSubVersion; + u16 DriverMajorVersion; + u16 DriverMinorVersion; + u16 DriverSubVersion; - u_int16_t XilinxRevisionNumber; - u_int16_t MaxFrameSize; + u16 XilinxRevisionNumber; + u16 MaxFrameSize; - u_int16_t t1_alarm1_status; - u_int16_t t1_alarm2_status; + u16 t1_alarm1_status; + u16 t1_alarm2_status; - int link_status; - u_int32_t mii_reg16; + int link_status; + u_int32_t mii_reg16; - u_int32_t Magic1; /* DEADBEEF */ + u_int32_t Magic1; /* DEADBEEF */ } LMC_XINFO; @@ -353,11 +292,10 @@ typedef struct lmc_xinfo { * forward decl */ struct lmc___softc { - void *if_ptr; /* General purpose pointer (used by SPPP) */ char *name; u8 board_idx; - struct lmc_statistics stats; - struct net_device *lmc_device; + struct lmc_extra_statistics extra_stats; + struct net_device *lmc_device; int hang, rxdesc, bad_packet, some_counter; u_int32_t txgo; @@ -381,7 +319,7 @@ struct lmc___softc { unsigned int lmc_taint_tx, lmc_taint_rx; int lmc_tx_start, lmc_txfull; int lmc_txbusy; - u_int16_t lmc_miireg16; + u16 lmc_miireg16; int lmc_ok; int last_link_status; int lmc_cardtype; @@ -408,8 +346,7 @@ struct lmc___softc { u32 num_int; spinlock_t lmc_lock; - u_int16_t if_type; /* PPP or NET */ - struct ppp_device *pd; + u16 if_type; /* HDLC/PPP or NET */ /* Failure cases */ u8 failed_ring; @@ -525,46 +462,9 @@ struct lmc___softc { #define LMC_ADAP_SSI 4 #define LMC_ADAP_T1 5 -#define HDLC_HDR_LEN 4 -#define HDLC_ADDR_LEN 1 -#define HDLC_SLARP 0x8035 #define LMC_MTU 1500 -#define SLARP_LINECHECK 2 #define LMC_CRC_LEN_16 2 /* 16-bit CRC */ #define LMC_CRC_LEN_32 4 -#ifdef LMC_HDLC -/* definition of an hdlc header. */ -struct hdlc_hdr -{ - u8 address; - u8 control; - u16 type; -}; - -/* definition of a slarp header. */ -struct slarp -{ - long code; - union sl - { - struct - { - ulong address; - ulong mask; - ushort unused; - } add; - struct - { - ulong mysequence; - ulong yoursequence; - ushort reliability; - ulong time; - } chk; - } t; -}; -#endif /* LMC_HDLC */ - - #endif /* _LMC_VAR_H_ */ -- cgit v1.2.3 From d507911c3a451986b3501417c78b568f3850b8ef Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Wed, 2 Jul 2008 20:55:58 +0200 Subject: WAN: don't mention syncppp in z8530 DocBook. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- Documentation/DocBook/z8530book.tmpl | 38 ++++++++++++------------------------ 1 file changed, 12 insertions(+), 26 deletions(-) diff --git a/Documentation/DocBook/z8530book.tmpl b/Documentation/DocBook/z8530book.tmpl index 42c75ba71ba2..a42a8a4c7689 100644 --- a/Documentation/DocBook/z8530book.tmpl +++ b/Documentation/DocBook/z8530book.tmpl @@ -69,12 +69,6 @@ device to be used as both a tty interface and as a synchronous controller is a project for Linux post the 2.4 release - - The support code handles most common card configurations and - supports running both Cisco HDLC and Synchronous PPP. With extra - glue the frame relay and X.25 protocols can also be used with this - driver. - @@ -179,35 +173,27 @@ If you wish to use the network interface facilities of the driver, then you need to attach a network device to each channel that is - present and in use. In addition to use the SyncPPP and Cisco HDLC + present and in use. In addition to use the generic HDLC you need to follow some additional plumbing rules. They may seem complex but a look at the example hostess_sv11 driver should reassure you. The network device used for each channel should be pointed to by - the netdevice field of each channel. The dev-> priv field of the + the netdevice field of each channel. The hdlc-> priv field of the network device points to your private data - you will need to be - able to find your ppp device from this. In addition to use the - sync ppp layer the private data must start with a void * pointer - to the syncppp structures. + able to find your private data from this. The way most drivers approach this particular problem is to create a structure holding the Z8530 device definition and - put that and the syncppp pointer into the private field of - the network device. The network device fields of the channels - then point back to the network devices. The ppp_device can also - be put in the private structure conveniently. + put that into the private field of the network device. The + network device fields of the channels then point back to the + network devices. - If you wish to use the synchronous ppp then you need to attach - the syncppp layer to the network device. You should do this before - you register the network device. The - sppp_attach requires that the first void * - pointer in your private data is pointing to an empty struct - ppp_device. The function fills in the initial data for the - ppp/hdlc layer. + If you wish to use the generic HDLC then you need to register + the HDLC device. Before you register your network device you will also need to @@ -314,10 +300,10 @@ buffer in sk_buff format and queues it for transmission. The caller must provide the entire packet with the exception of the bitstuffing and CRC. This is normally done by the caller via - the syncppp interface layer. It returns 0 if the buffer has been - queued and non zero values for queue full. If the function accepts - the buffer it becomes property of the Z8530 layer and the caller - should not free it. + the generic HDLC interface layer. It returns 0 if the buffer has been + queued and non zero values for queue full. If the function accepts + the buffer it becomes property of the Z8530 layer and the caller + should not free it. The function z8530_get_stats returns a pointer -- cgit v1.2.3 From 867240f7b2a37b1be4ba37d904a9064a96c82099 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Thu, 3 Jul 2008 00:39:46 +0200 Subject: WAN: Use u32 type instead of u_int32_t in LMC driver. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/lmc/lmc.h | 11 +- drivers/net/wan/lmc/lmc_debug.c | 7 +- drivers/net/wan/lmc/lmc_debug.h | 6 +- drivers/net/wan/lmc/lmc_main.c | 15 +-- drivers/net/wan/lmc/lmc_media.c | 9 +- drivers/net/wan/lmc/lmc_var.h | 234 ++++++++++++++++++++-------------------- 6 files changed, 139 insertions(+), 143 deletions(-) diff --git a/drivers/net/wan/lmc/lmc.h b/drivers/net/wan/lmc/lmc.h index 882e58c1bfd7..4ced7ac16c2c 100644 --- a/drivers/net/wan/lmc/lmc.h +++ b/drivers/net/wan/lmc/lmc.h @@ -11,12 +11,12 @@ unsigned lmc_mii_readreg(lmc_softc_t * const sc, unsigned devaddr, unsigned regno); void lmc_mii_writereg(lmc_softc_t * const sc, unsigned devaddr, unsigned regno, unsigned data); -void lmc_led_on(lmc_softc_t * const, u_int32_t); -void lmc_led_off(lmc_softc_t * const, u_int32_t); +void lmc_led_on(lmc_softc_t * const, u32); +void lmc_led_off(lmc_softc_t * const, u32); unsigned lmc_mii_readreg(lmc_softc_t * const, unsigned, unsigned); void lmc_mii_writereg(lmc_softc_t * const, unsigned, unsigned, unsigned); -void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits); -void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits); +void lmc_gpio_mkinput(lmc_softc_t * const sc, u32 bits); +void lmc_gpio_mkoutput(lmc_softc_t * const sc, u32 bits); int lmc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); @@ -26,8 +26,7 @@ extern lmc_media_t lmc_t1_media; extern lmc_media_t lmc_hssi_media; #ifdef _DBG_EVENTLOG -static void lmcEventLog( u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3 ); +static void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3); #endif #endif - diff --git a/drivers/net/wan/lmc/lmc_debug.c b/drivers/net/wan/lmc/lmc_debug.c index 3b94352b0d03..15049d711f47 100644 --- a/drivers/net/wan/lmc/lmc_debug.c +++ b/drivers/net/wan/lmc/lmc_debug.c @@ -1,4 +1,3 @@ - #include #include #include @@ -48,10 +47,10 @@ void lmcConsoleLog(char *type, unsigned char *ucData, int iLen) #endif #ifdef DEBUG -u_int32_t lmcEventLogIndex = 0; -u_int32_t lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS]; +u32 lmcEventLogIndex; +u32 lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS]; -void lmcEventLog (u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3) +void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3) { lmcEventLogBuf[lmcEventLogIndex++] = EventNum; lmcEventLogBuf[lmcEventLogIndex++] = arg2; diff --git a/drivers/net/wan/lmc/lmc_debug.h b/drivers/net/wan/lmc/lmc_debug.h index cf3563859bf3..2d46f121549f 100644 --- a/drivers/net/wan/lmc/lmc_debug.h +++ b/drivers/net/wan/lmc/lmc_debug.h @@ -38,15 +38,15 @@ #ifdef DEBUG -extern u_int32_t lmcEventLogIndex; -extern u_int32_t lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS]; +extern u32 lmcEventLogIndex; +extern u32 lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS]; #define LMC_EVENT_LOG(x, y, z) lmcEventLog((x), (y), (z)) #else #define LMC_EVENT_LOG(x,y,z) #endif /* end ifdef _DBG_EVENTLOG */ void lmcConsoleLog(char *type, unsigned char *ucData, int iLen); -void lmcEventLog (u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3); +void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3); void lmc_trace(struct net_device *dev, char *msg); #endif diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index f64f4ca80b55..f80640f5a744 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -310,7 +310,8 @@ int lmc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ ret = -EFAULT; break; } - if (copy_to_user(ifr->ifr_data + sizeof (u32), lmcEventLogBuf, sizeof (lmcEventLogBuf))) + if (copy_to_user(ifr->ifr_data + sizeof(u32), lmcEventLogBuf, + sizeof(lmcEventLogBuf))) ret = -EFAULT; else ret = 0; @@ -624,7 +625,7 @@ static void lmc_watchdog (unsigned long data) /*fold00*/ struct net_device *dev = (struct net_device *)data; lmc_softc_t *sc = dev_to_sc(dev); int link_status; - u_int32_t ticks; + u32 ticks; unsigned long flags; lmc_trace(dev, "lmc_watchdog in"); @@ -1899,7 +1900,7 @@ static void lmc_softreset (lmc_softc_t * const sc) /*fold00*/ lmc_trace(sc->lmc_device, "lmc_softreset out"); } -void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/ +void lmc_gpio_mkinput(lmc_softc_t * const sc, u32 bits) /*fold00*/ { lmc_trace(sc->lmc_device, "lmc_gpio_mkinput in"); sc->lmc_gpio_io &= ~bits; @@ -1907,7 +1908,7 @@ void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/ lmc_trace(sc->lmc_device, "lmc_gpio_mkinput out"); } -void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/ +void lmc_gpio_mkoutput(lmc_softc_t * const sc, u32 bits) /*fold00*/ { lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput in"); sc->lmc_gpio_io |= bits; @@ -1915,7 +1916,7 @@ void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/ lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput out"); } -void lmc_led_on(lmc_softc_t * const sc, u_int32_t led) /*fold00*/ +void lmc_led_on(lmc_softc_t * const sc, u32 led) /*fold00*/ { lmc_trace(sc->lmc_device, "lmc_led_on in"); if((~sc->lmc_miireg16) & led){ /* Already on! */ @@ -1928,7 +1929,7 @@ void lmc_led_on(lmc_softc_t * const sc, u_int32_t led) /*fold00*/ lmc_trace(sc->lmc_device, "lmc_led_on out"); } -void lmc_led_off(lmc_softc_t * const sc, u_int32_t led) /*fold00*/ +void lmc_led_off(lmc_softc_t * const sc, u32 led) /*fold00*/ { lmc_trace(sc->lmc_device, "lmc_led_off in"); if(sc->lmc_miireg16 & led){ /* Already set don't do anything */ @@ -1984,7 +1985,7 @@ static void lmc_reset(lmc_softc_t * const sc) /*fold00*/ static void lmc_dec_reset(lmc_softc_t * const sc) /*fold00*/ { - u_int32_t val; + u32 val; lmc_trace(sc->lmc_device, "lmc_dec_reset in"); /* diff --git a/drivers/net/wan/lmc/lmc_media.c b/drivers/net/wan/lmc/lmc_media.c index 2e0711a956cc..f327674fc93a 100644 --- a/drivers/net/wan/lmc/lmc_media.c +++ b/drivers/net/wan/lmc/lmc_media.c @@ -93,8 +93,7 @@ static void lmc_dummy_set_1 (lmc_softc_t * const, int); static void lmc_dummy_set2_1 (lmc_softc_t * const, lmc_ctl_t *); static inline void write_av9110_bit (lmc_softc_t *, int); -static void write_av9110 (lmc_softc_t *, u_int32_t, u_int32_t, u_int32_t, - u_int32_t, u_int32_t); +static void write_av9110(lmc_softc_t *, u32, u32, u32, u32, u32); lmc_media_t lmc_ds3_media = { lmc_ds3_init, /* special media init stuff */ @@ -679,7 +678,7 @@ static int lmc_ssi_get_link_status (lmc_softc_t * const sc) { u16 link_status; - u_int32_t ticks; + u32 ticks; int ret = 1; int hw_hdsk = 1; @@ -835,9 +834,7 @@ write_av9110_bit (lmc_softc_t * sc, int c) LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio); } -static void -write_av9110 (lmc_softc_t * sc, u_int32_t n, u_int32_t m, u_int32_t v, - u_int32_t x, u_int32_t r) +static void write_av9110(lmc_softc_t *sc, u32 n, u32 m, u32 v, u32 x, u32 r) { int i; diff --git a/drivers/net/wan/lmc/lmc_var.h b/drivers/net/wan/lmc/lmc_var.h index 52e044209d50..65d01978e784 100644 --- a/drivers/net/wan/lmc/lmc_var.h +++ b/drivers/net/wan/lmc/lmc_var.h @@ -100,45 +100,45 @@ struct lmc_regfile_t { * used to define bits in the second tulip_desc_t field (length) * for the transmit descriptor -baz */ -#define LMC_TDES_FIRST_BUFFER_SIZE ((u_int32_t)(0x000007FF)) -#define LMC_TDES_SECOND_BUFFER_SIZE ((u_int32_t)(0x003FF800)) -#define LMC_TDES_HASH_FILTERING ((u_int32_t)(0x00400000)) -#define LMC_TDES_DISABLE_PADDING ((u_int32_t)(0x00800000)) -#define LMC_TDES_SECOND_ADDR_CHAINED ((u_int32_t)(0x01000000)) -#define LMC_TDES_END_OF_RING ((u_int32_t)(0x02000000)) -#define LMC_TDES_ADD_CRC_DISABLE ((u_int32_t)(0x04000000)) -#define LMC_TDES_SETUP_PACKET ((u_int32_t)(0x08000000)) -#define LMC_TDES_INVERSE_FILTERING ((u_int32_t)(0x10000000)) -#define LMC_TDES_FIRST_SEGMENT ((u_int32_t)(0x20000000)) -#define LMC_TDES_LAST_SEGMENT ((u_int32_t)(0x40000000)) -#define LMC_TDES_INTERRUPT_ON_COMPLETION ((u_int32_t)(0x80000000)) +#define LMC_TDES_FIRST_BUFFER_SIZE ((u32)(0x000007FF)) +#define LMC_TDES_SECOND_BUFFER_SIZE ((u32)(0x003FF800)) +#define LMC_TDES_HASH_FILTERING ((u32)(0x00400000)) +#define LMC_TDES_DISABLE_PADDING ((u32)(0x00800000)) +#define LMC_TDES_SECOND_ADDR_CHAINED ((u32)(0x01000000)) +#define LMC_TDES_END_OF_RING ((u32)(0x02000000)) +#define LMC_TDES_ADD_CRC_DISABLE ((u32)(0x04000000)) +#define LMC_TDES_SETUP_PACKET ((u32)(0x08000000)) +#define LMC_TDES_INVERSE_FILTERING ((u32)(0x10000000)) +#define LMC_TDES_FIRST_SEGMENT ((u32)(0x20000000)) +#define LMC_TDES_LAST_SEGMENT ((u32)(0x40000000)) +#define LMC_TDES_INTERRUPT_ON_COMPLETION ((u32)(0x80000000)) #define TDES_SECOND_BUFFER_SIZE_BIT_NUMBER 11 #define TDES_COLLISION_COUNT_BIT_NUMBER 3 /* Constants for the RCV descriptor RDES */ -#define LMC_RDES_OVERFLOW ((u_int32_t)(0x00000001)) -#define LMC_RDES_CRC_ERROR ((u_int32_t)(0x00000002)) -#define LMC_RDES_DRIBBLING_BIT ((u_int32_t)(0x00000004)) -#define LMC_RDES_REPORT_ON_MII_ERR ((u_int32_t)(0x00000008)) -#define LMC_RDES_RCV_WATCHDOG_TIMEOUT ((u_int32_t)(0x00000010)) -#define LMC_RDES_FRAME_TYPE ((u_int32_t)(0x00000020)) -#define LMC_RDES_COLLISION_SEEN ((u_int32_t)(0x00000040)) -#define LMC_RDES_FRAME_TOO_LONG ((u_int32_t)(0x00000080)) -#define LMC_RDES_LAST_DESCRIPTOR ((u_int32_t)(0x00000100)) -#define LMC_RDES_FIRST_DESCRIPTOR ((u_int32_t)(0x00000200)) -#define LMC_RDES_MULTICAST_FRAME ((u_int32_t)(0x00000400)) -#define LMC_RDES_RUNT_FRAME ((u_int32_t)(0x00000800)) -#define LMC_RDES_DATA_TYPE ((u_int32_t)(0x00003000)) -#define LMC_RDES_LENGTH_ERROR ((u_int32_t)(0x00004000)) -#define LMC_RDES_ERROR_SUMMARY ((u_int32_t)(0x00008000)) -#define LMC_RDES_FRAME_LENGTH ((u_int32_t)(0x3FFF0000)) -#define LMC_RDES_OWN_BIT ((u_int32_t)(0x80000000)) +#define LMC_RDES_OVERFLOW ((u32)(0x00000001)) +#define LMC_RDES_CRC_ERROR ((u32)(0x00000002)) +#define LMC_RDES_DRIBBLING_BIT ((u32)(0x00000004)) +#define LMC_RDES_REPORT_ON_MII_ERR ((u32)(0x00000008)) +#define LMC_RDES_RCV_WATCHDOG_TIMEOUT ((u32)(0x00000010)) +#define LMC_RDES_FRAME_TYPE ((u32)(0x00000020)) +#define LMC_RDES_COLLISION_SEEN ((u32)(0x00000040)) +#define LMC_RDES_FRAME_TOO_LONG ((u32)(0x00000080)) +#define LMC_RDES_LAST_DESCRIPTOR ((u32)(0x00000100)) +#define LMC_RDES_FIRST_DESCRIPTOR ((u32)(0x00000200)) +#define LMC_RDES_MULTICAST_FRAME ((u32)(0x00000400)) +#define LMC_RDES_RUNT_FRAME ((u32)(0x00000800)) +#define LMC_RDES_DATA_TYPE ((u32)(0x00003000)) +#define LMC_RDES_LENGTH_ERROR ((u32)(0x00004000)) +#define LMC_RDES_ERROR_SUMMARY ((u32)(0x00008000)) +#define LMC_RDES_FRAME_LENGTH ((u32)(0x3FFF0000)) +#define LMC_RDES_OWN_BIT ((u32)(0x80000000)) #define RDES_FRAME_LENGTH_BIT_NUMBER 16 -#define LMC_RDES_ERROR_MASK ( (u_int32_t)( \ +#define LMC_RDES_ERROR_MASK ( (u32)( \ LMC_RDES_OVERFLOW \ | LMC_RDES_DRIBBLING_BIT \ | LMC_RDES_REPORT_ON_MII_ERR \ @@ -150,32 +150,32 @@ struct lmc_regfile_t { */ typedef struct { - u_int32_t n; - u_int32_t m; - u_int32_t v; - u_int32_t x; - u_int32_t r; - u_int32_t f; - u_int32_t exact; + u32 n; + u32 m; + u32 v; + u32 x; + u32 r; + u32 f; + u32 exact; } lmc_av9110_t; /* * Common structure passed to the ioctl code. */ struct lmc___ctl { - u_int32_t cardtype; - u_int32_t clock_source; /* HSSI, T1 */ - u_int32_t clock_rate; /* T1 */ - u_int32_t crc_length; - u_int32_t cable_length; /* DS3 */ - u_int32_t scrambler_onoff; /* DS3 */ - u_int32_t cable_type; /* T1 */ - u_int32_t keepalive_onoff; /* protocol */ - u_int32_t ticks; /* ticks/sec */ + u32 cardtype; + u32 clock_source; /* HSSI, T1 */ + u32 clock_rate; /* T1 */ + u32 crc_length; + u32 cable_length; /* DS3 */ + u32 scrambler_onoff; /* DS3 */ + u32 cable_type; /* T1 */ + u32 keepalive_onoff; /* protocol */ + u32 ticks; /* ticks/sec */ union { lmc_av9110_t ssi; } cardspec; - u_int32_t circuit_type; /* T1 or E1 */ + u32 circuit_type; /* T1 or E1 */ }; @@ -224,52 +224,52 @@ struct lmc___media { struct lmc_extra_statistics { - u_int32_t version_size; - u_int32_t lmc_cardtype; - - u_int32_t tx_ProcTimeout; - u_int32_t tx_IntTimeout; - u_int32_t tx_NoCompleteCnt; - u_int32_t tx_MaxXmtsB4Int; - u_int32_t tx_TimeoutCnt; - u_int32_t tx_OutOfSyncPtr; - u_int32_t tx_tbusy0; - u_int32_t tx_tbusy1; - u_int32_t tx_tbusy_calls; - u_int32_t resetCount; - u_int32_t lmc_txfull; - u_int32_t tbusy; - u_int32_t dirtyTx; - u_int32_t lmc_next_tx; - u_int32_t otherTypeCnt; - u_int32_t lastType; - u_int32_t lastTypeOK; - u_int32_t txLoopCnt; - u_int32_t usedXmtDescripCnt; - u_int32_t txIndexCnt; - u_int32_t rxIntLoopCnt; - - u_int32_t rx_SmallPktCnt; - u_int32_t rx_BadPktSurgeCnt; - u_int32_t rx_BuffAllocErr; - u_int32_t tx_lossOfClockCnt; - - /* T1 error counters */ - u_int32_t framingBitErrorCount; - u_int32_t lineCodeViolationCount; - - u_int32_t lossOfFrameCount; - u_int32_t changeOfFrameAlignmentCount; - u_int32_t severelyErroredFrameCount; - - u_int32_t check; + u32 version_size; + u32 lmc_cardtype; + + u32 tx_ProcTimeout; + u32 tx_IntTimeout; + u32 tx_NoCompleteCnt; + u32 tx_MaxXmtsB4Int; + u32 tx_TimeoutCnt; + u32 tx_OutOfSyncPtr; + u32 tx_tbusy0; + u32 tx_tbusy1; + u32 tx_tbusy_calls; + u32 resetCount; + u32 lmc_txfull; + u32 tbusy; + u32 dirtyTx; + u32 lmc_next_tx; + u32 otherTypeCnt; + u32 lastType; + u32 lastTypeOK; + u32 txLoopCnt; + u32 usedXmtDescripCnt; + u32 txIndexCnt; + u32 rxIntLoopCnt; + + u32 rx_SmallPktCnt; + u32 rx_BadPktSurgeCnt; + u32 rx_BuffAllocErr; + u32 tx_lossOfClockCnt; + + /* T1 error counters */ + u32 framingBitErrorCount; + u32 lineCodeViolationCount; + + u32 lossOfFrameCount; + u32 changeOfFrameAlignmentCount; + u32 severelyErroredFrameCount; + + u32 check; }; typedef struct lmc_xinfo { - u_int32_t Magic0; /* BEEFCAFE */ + u32 Magic0; /* BEEFCAFE */ - u_int32_t PciCardType; - u_int32_t PciSlotNumber; /* PCI slot number */ + u32 PciCardType; + u32 PciSlotNumber; /* PCI slot number */ u16 DriverMajorVersion; u16 DriverMinorVersion; @@ -282,9 +282,9 @@ typedef struct lmc_xinfo { u16 t1_alarm2_status; int link_status; - u_int32_t mii_reg16; + u32 mii_reg16; - u_int32_t Magic1; /* DEADBEEF */ + u32 Magic1; /* DEADBEEF */ } LMC_XINFO; @@ -298,16 +298,16 @@ struct lmc___softc { struct net_device *lmc_device; int hang, rxdesc, bad_packet, some_counter; - u_int32_t txgo; + u32 txgo; struct lmc_regfile_t lmc_csrs; - volatile u_int32_t lmc_txtick; - volatile u_int32_t lmc_rxtick; - u_int32_t lmc_flags; - u_int32_t lmc_intrmask; /* our copy of csr_intr */ - u_int32_t lmc_cmdmode; /* our copy of csr_cmdmode */ - u_int32_t lmc_busmode; /* our copy of csr_busmode */ - u_int32_t lmc_gpio_io; /* state of in/out settings */ - u_int32_t lmc_gpio; /* state of outputs */ + volatile u32 lmc_txtick; + volatile u32 lmc_rxtick; + u32 lmc_flags; + u32 lmc_intrmask; /* our copy of csr_intr */ + u32 lmc_cmdmode; /* our copy of csr_cmdmode */ + u32 lmc_busmode; /* our copy of csr_busmode */ + u32 lmc_gpio_io; /* state of in/out settings */ + u32 lmc_gpio; /* state of outputs */ struct sk_buff* lmc_txq[LMC_TXDESCS]; struct sk_buff* lmc_rxq[LMC_RXDESCS]; volatile @@ -323,37 +323,37 @@ struct lmc___softc { int lmc_ok; int last_link_status; int lmc_cardtype; - u_int32_t last_frameerr; + u32 last_frameerr; lmc_media_t *lmc_media; struct timer_list timer; lmc_ctl_t ictl; - u_int32_t TxDescriptControlInit; + u32 TxDescriptControlInit; int tx_TimeoutInd; /* additional driver state */ int tx_TimeoutDisplay; unsigned int lastlmc_taint_tx; int lasttx_packets; - u_int32_t tx_clockState; - u_int32_t lmc_crcSize; - LMC_XINFO lmc_xinfo; + u32 tx_clockState; + u32 lmc_crcSize; + LMC_XINFO lmc_xinfo; char lmc_yel, lmc_blue, lmc_red; /* for T1 and DS3 */ - char lmc_timing; /* for HSSI and SSI */ - int got_irq; + char lmc_timing; /* for HSSI and SSI */ + int got_irq; - char last_led_err[4]; + char last_led_err[4]; - u32 last_int; - u32 num_int; + u32 last_int; + u32 num_int; spinlock_t lmc_lock; u16 if_type; /* HDLC/PPP or NET */ - /* Failure cases */ - u8 failed_ring; - u8 failed_recv_alloc; + /* Failure cases */ + u8 failed_ring; + u8 failed_recv_alloc; - /* Structure check */ - u32 check; + /* Structure check */ + u32 check; }; #define LMC_PCI_TIME 1 @@ -449,8 +449,8 @@ struct lmc___softc { | TULIP_STS_TXUNDERFLOW\ | TULIP_STS_RXSTOPPED ) -#define DESC_OWNED_BY_SYSTEM ((u_int32_t)(0x00000000)) -#define DESC_OWNED_BY_DC21X4 ((u_int32_t)(0x80000000)) +#define DESC_OWNED_BY_SYSTEM ((u32)(0x00000000)) +#define DESC_OWNED_BY_DC21X4 ((u32)(0x80000000)) #ifndef TULIP_CMD_RECEIVEALL #define TULIP_CMD_RECEIVEALL 0x40000000L -- cgit v1.2.3 From 54da1174922cddd4be83d5a364b2e0fdd693f513 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Wed, 23 Jul 2008 20:52:05 +0400 Subject: posix-timers: do_schedule_next_timer: fix the setting of ->si_overrun do_schedule_next_timer() sets info->si_overrun = timr->it_overrun_last, this discards the already accumulated overruns. Signed-off-by: Oleg Nesterov Cc: Mark McLoughlin Cc: Oliver Pinter Cc: Roland McGrath Cc: stable@kernel.org Cc: Andrew Morton Signed-off-by: Thomas Gleixner --- kernel/posix-timers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c index dbd8398ddb0b..814a2bb8d2ea 100644 --- a/kernel/posix-timers.c +++ b/kernel/posix-timers.c @@ -289,7 +289,7 @@ void do_schedule_next_timer(struct siginfo *info) else schedule_next_timer(timr); - info->si_overrun = timr->it_overrun_last; + info->si_overrun += timr->it_overrun_last; } if (timr) -- cgit v1.2.3 From ba661292a2bc6ddd305a212b0526e5dc22195fe7 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Wed, 23 Jul 2008 20:52:05 +0400 Subject: posix-timers: fix posix_timer_event() vs dequeue_signal() race The bug was reported and analysed by Mark McLoughlin , the patch is based on his and Roland's suggestions. posix_timer_event() always rewrites the pre-allocated siginfo before sending the signal. Most of the written info is the same all the time, but memset(0) is very wrong. If ->sigq is queued we can race with collect_signal() which can fail to find this siginfo looking at .si_signo, or copy_siginfo() can copy the wrong .si_code/si_tid/etc. In short, sys_timer_settime() can in fact stop the active timer, or the user can receive the siginfo with the wrong .si_xxx values. Move "memset(->info, 0)" from posix_timer_event() to alloc_posix_timer(), change send_sigqueue() to set .si_overrun = 0 when ->sigq is not queued. It would be nice to move the whole sigq->info initialization from send to create path, but this is not easy to do without uglifying timer_create() further. As Roland rightly pointed out, we need more cleanups/fixes here, see the "FIXME" comment in the patch. Hopefully this patch makes sense anyway, and it can mask the most bad implications. Reported-by: Mark McLoughlin Signed-off-by: Oleg Nesterov Cc: Mark McLoughlin Cc: Oliver Pinter Cc: Roland McGrath Cc: stable@kernel.org Cc: Andrew Morton Signed-off-by: Thomas Gleixner kernel/posix-timers.c | 17 +++++++++++++---- kernel/signal.c | 1 + 2 files changed, 14 insertions(+), 4 deletions(-) --- kernel/posix-timers.c | 17 +++++++++++++---- kernel/signal.c | 1 + 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c index 814a2bb8d2ea..0ffaeb075e35 100644 --- a/kernel/posix-timers.c +++ b/kernel/posix-timers.c @@ -296,14 +296,22 @@ void do_schedule_next_timer(struct siginfo *info) unlock_timer(timr, flags); } -int posix_timer_event(struct k_itimer *timr,int si_private) +int posix_timer_event(struct k_itimer *timr, int si_private) { - memset(&timr->sigq->info, 0, sizeof(siginfo_t)); + /* + * FIXME: if ->sigq is queued we can race with + * dequeue_signal()->do_schedule_next_timer(). + * + * If dequeue_signal() sees the "right" value of + * si_sys_private it calls do_schedule_next_timer(). + * We re-queue ->sigq and drop ->it_lock(). + * do_schedule_next_timer() locks the timer + * and re-schedules it while ->sigq is pending. + * Not really bad, but not that we want. + */ timr->sigq->info.si_sys_private = si_private; - /* Send signal to the process that owns this timer.*/ timr->sigq->info.si_signo = timr->it_sigev_signo; - timr->sigq->info.si_errno = 0; timr->sigq->info.si_code = SI_TIMER; timr->sigq->info.si_tid = timr->it_id; timr->sigq->info.si_value = timr->it_sigev_value; @@ -435,6 +443,7 @@ static struct k_itimer * alloc_posix_timer(void) kmem_cache_free(posix_timers_cache, tmr); tmr = NULL; } + memset(&tmr->sigq->info, 0, sizeof(siginfo_t)); return tmr; } diff --git a/kernel/signal.c b/kernel/signal.c index 72bb4f51f963..13fab9838354 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -1280,6 +1280,7 @@ int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group) q->info.si_overrun++; goto out; } + q->info.si_overrun = 0; signalfd_notify(t, sig); pending = group ? &t->signal->shared_pending : &t->pending; -- cgit v1.2.3 From 8fa89bf5de066b11190ac804903021700c2b1185 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 14 Jul 2008 22:56:55 +0200 Subject: mv643xx_eth: fix TX hang erratum workaround The previously merged TX hang erratum workaround ("mv643xx_eth: work around TX hang hardware issue") assumes that TX_END interrupts are delivered simultaneously with or after their corresponding TX interrupts, but this is not always true in practise. In particular, it appears that TX_END interrupts are issued as soon as descriptor fetch returns an invalid descriptor, which may happen before earlier descriptors have been fully transmitted and written back to memory as being done. This hardware behavior can lead to a situation where the current driver code mistakenly assumes that the MAC has given up transmitting before noticing the packets that it is in fact still currently working on, causing the driver to re-kick the transmit queue, which will only cause the MAC to re-fetch the invalid head descriptor, and generate another TX_END interrupt, et cetera, until the packets in the pipe finally finish transmitting and have their descriptors written back to memory, which will then finally break the loop. Fix this by having the erratum workaround not check the 'number of unfinished descriptor', but instead, to compare the software's idea of what the head descriptor pointer should be to the hardware's head descriptor pointer (which is updated on the same conditions as the TX_END interupt is generated on, i.e. possibly before all previous descriptors have been transmitted and written back). Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 41 +++++++++++++++++++++++++++++------------ 1 file changed, 29 insertions(+), 12 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 8a97a0066a88..910920e21259 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -96,6 +96,7 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define TX_BW_MTU(p) (0x0458 + ((p) << 10)) #define TX_BW_BURST(p) (0x045c + ((p) << 10)) #define INT_CAUSE(p) (0x0460 + ((p) << 10)) +#define INT_TX_END_0 0x00080000 #define INT_TX_END 0x07f80000 #define INT_RX 0x0007fbfc #define INT_EXT 0x00000002 @@ -706,6 +707,7 @@ static inline __be16 sum16_as_be(__sum16 sum) static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb) { + struct mv643xx_eth_private *mp = txq_to_mp(txq); int nr_frags = skb_shinfo(skb)->nr_frags; int tx_index; struct tx_desc *desc; @@ -759,6 +761,10 @@ static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb) wmb(); desc->cmd_sts = cmd_sts; + /* clear TX_END interrupt status */ + wrl(mp, INT_CAUSE(mp->port_num), ~(INT_TX_END_0 << txq->index)); + rdl(mp, INT_CAUSE(mp->port_num)); + /* ensure all descriptors are written before poking hardware */ wmb(); txq_enable(txq); @@ -1684,7 +1690,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) struct mv643xx_eth_private *mp = netdev_priv(dev); u32 int_cause; u32 int_cause_ext; - u32 txq_active; int_cause = rdl(mp, INT_CAUSE(mp->port_num)) & (INT_TX_END | INT_RX | INT_EXT); @@ -1743,8 +1748,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) } #endif - txq_active = rdl(mp, TXQ_COMMAND(mp->port_num)); - /* * TxBuffer or TxError set for any of the 8 queues? */ @@ -1754,6 +1757,14 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) for (i = 0; i < 8; i++) if (mp->txq_mask & (1 << i)) txq_reclaim(mp->txq + i, 0); + + /* + * Enough space again in the primary TX queue for a + * full packet? + */ + spin_lock(&mp->lock); + __txq_maybe_wake(mp->txq + mp->txq_primary); + spin_unlock(&mp->lock); } /* @@ -1763,19 +1774,25 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) int i; wrl(mp, INT_CAUSE(mp->port_num), ~(int_cause & INT_TX_END)); + + spin_lock(&mp->lock); for (i = 0; i < 8; i++) { struct tx_queue *txq = mp->txq + i; - if (txq->tx_desc_count && !((txq_active >> i) & 1)) + u32 hw_desc_ptr; + u32 expected_ptr; + + if ((int_cause & (INT_TX_END_0 << i)) == 0) + continue; + + hw_desc_ptr = + rdl(mp, TXQ_CURRENT_DESC_PTR(mp->port_num, i)); + expected_ptr = (u32)txq->tx_desc_dma + + txq->tx_curr_desc * sizeof(struct tx_desc); + + if (hw_desc_ptr != expected_ptr) txq_enable(txq); } - } - - /* - * Enough space again in the primary TX queue for a full packet? - */ - if (int_cause_ext & INT_EXT_TX) { - struct tx_queue *txq = mp->txq + mp->txq_primary; - __txq_maybe_wake(txq); + spin_unlock(&mp->lock); } return IRQ_HANDLED; -- cgit v1.2.3 From 6b368f6859c80343e5d7c6e2a7c49df0a8a273c1 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 11 Jul 2008 19:38:34 +0200 Subject: mv643xx_eth: prevent breakage when link goes down during transmit When the ethernet link goes down while mv643xx_eth is transmitting data, transmit DMA can stop before all queued transmit descriptors have been processed. But even the descriptors that _have_ been processed might not be properly marked as done before the transmit DMA unit shuts down. Then when the link comes up again, the hardware transmit pointer might have advanced while not all previous packet descriptors have been marked as transmitted, causing software transmit reclaim to hang waiting for the hardware to finish transmitting a descriptor that it has already skipped. This patch forcibly reclaims all packets on the transmit ring on a link down interrupt, and then resyncs the hardware transmit pointer to what the software's idea of the first free descriptor is. Also, we need to prevent re-waking the transmit queue if we get a 'transmit done' interrupt at the same time as a 'link down' interrupt, which this patch does as well. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 57 +++++++++++++++++++++++++++++++---------------- 1 file changed, 38 insertions(+), 19 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 910920e21259..d7620c50efb1 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -405,6 +405,17 @@ static void rxq_disable(struct rx_queue *rxq) udelay(10); } +static void txq_reset_hw_ptr(struct tx_queue *txq) +{ + struct mv643xx_eth_private *mp = txq_to_mp(txq); + int off = TXQ_CURRENT_DESC_PTR(mp->port_num, txq->index); + u32 addr; + + addr = (u32)txq->tx_desc_dma; + addr += txq->tx_curr_desc * sizeof(struct tx_desc); + wrl(mp, off, addr); +} + static void txq_enable(struct tx_queue *txq) { struct mv643xx_eth_private *mp = txq_to_mp(txq); @@ -1545,8 +1556,11 @@ static int txq_init(struct mv643xx_eth_private *mp, int index) tx_desc = (struct tx_desc *)txq->tx_desc_area; for (i = 0; i < txq->tx_ring_size; i++) { + struct tx_desc *txd = tx_desc + i; int nexti = (i + 1) % txq->tx_ring_size; - tx_desc[i].next_desc_ptr = txq->tx_desc_dma + + + txd->cmd_sts = 0; + txd->next_desc_ptr = txq->tx_desc_dma + nexti * sizeof(struct tx_desc); } @@ -1583,8 +1597,11 @@ static void txq_reclaim(struct tx_queue *txq, int force) desc = &txq->tx_desc_area[tx_index]; cmd_sts = desc->cmd_sts; - if (!force && (cmd_sts & BUFFER_OWNED_BY_DMA)) - break; + if (cmd_sts & BUFFER_OWNED_BY_DMA) { + if (!force) + break; + desc->cmd_sts = cmd_sts & ~BUFFER_OWNED_BY_DMA; + } txq->tx_used_desc = (tx_index + 1) % txq->tx_ring_size; txq->tx_desc_count--; @@ -1705,8 +1722,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) { if (mp->phy_addr == -1 || mii_link_ok(&mp->mii)) { - int i; - if (mp->phy_addr != -1) { struct ethtool_cmd cmd; @@ -1714,17 +1729,24 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) update_pscr(mp, cmd.speed, cmd.duplex); } - for (i = 0; i < 8; i++) - if (mp->txq_mask & (1 << i)) - txq_enable(mp->txq + i); - if (!netif_carrier_ok(dev)) { netif_carrier_on(dev); - __txq_maybe_wake(mp->txq + mp->txq_primary); + netif_wake_queue(dev); } } else if (netif_carrier_ok(dev)) { + int i; + netif_stop_queue(dev); netif_carrier_off(dev); + + for (i = 0; i < 8; i++) { + struct tx_queue *txq = mp->txq + i; + + if (mp->txq_mask & (1 << i)) { + txq_reclaim(txq, 1); + txq_reset_hw_ptr(txq); + } + } } } @@ -1762,9 +1784,11 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) * Enough space again in the primary TX queue for a * full packet? */ - spin_lock(&mp->lock); - __txq_maybe_wake(mp->txq + mp->txq_primary); - spin_unlock(&mp->lock); + if (netif_carrier_ok(dev)) { + spin_lock(&mp->lock); + __txq_maybe_wake(mp->txq + mp->txq_primary); + spin_unlock(&mp->lock); + } } /* @@ -1851,16 +1875,11 @@ static void port_start(struct mv643xx_eth_private *mp) tx_set_rate(mp, 1000000000, 16777216); for (i = 0; i < 8; i++) { struct tx_queue *txq = mp->txq + i; - int off = TXQ_CURRENT_DESC_PTR(mp->port_num, i); - u32 addr; if ((mp->txq_mask & (1 << i)) == 0) continue; - addr = (u32)txq->tx_desc_dma; - addr += txq->tx_curr_desc * sizeof(struct tx_desc); - wrl(mp, off, addr); - + txq_reset_hw_ptr(txq); txq_set_rate(txq, 1000000000, 16777216); txq_set_fixed_prio_mode(txq); } -- cgit v1.2.3 From 4dfc1c87af46f9d8abf2ef78a4e22891d7a564c3 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 15 Jul 2008 13:34:51 +0200 Subject: mv643xx_eth: fix transmit-reclaim-in-napi-poll The mv643xx_eth driver allows doing transmit reclaim from within the napi poll routine, but after doing reclaim, it would forget to check the free transmit descriptor count and wake up the transmit queue if the reclaim caused enough descriptors for a new packet to become available. This would cause the netdev watchdog to occasionally kick in during certain workloads with combined receive and transmit traffic. Fix this by adding a wakeup check identical to the one in the interrupt handler to the napi poll routine. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index d7620c50efb1..3211369a4320 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -626,6 +626,12 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) for (i = 0; i < 8; i++) if (mp->txq_mask & (1 << i)) txq_reclaim(mp->txq + i, 0); + + if (netif_carrier_ok(mp->dev)) { + spin_lock(&mp->lock); + __txq_maybe_wake(mp->txq + mp->txq_primary); + spin_unlock(&mp->lock); + } } #endif -- cgit v1.2.3 From 65193a91fc60fdb79e392c9842c10552a1fa3e1c Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 11 Jul 2008 00:39:41 +0200 Subject: mv643xx_eth: don't fiddle with maximum receive packet size setting The maximum receive packet size field in the Port Serial Control register controls at what size received packets are flagged overlength in the receive descriptor, but it doesn't prevent overlength packets from being DMAd to memory and signaled to the host like other received packets. mv643xx_eth does not support receiving jumbo frames in 10/100 mode, but setting the packet threshold to larger than 1522 bytes in 10/100 mode won't cause breakage by itself. If we really want to enforce maximum packet size on the receiving end instead of on the sending end where it should be done, we can always just add a length check to the software receive handler instead of relying on the hardware to do the comparison for us. What's more, changing the maximum packet size field requires temporarily disabling the RX/TX paths. So once the link comes up in 10/100 Mb/s mode or 1000 Mb/s mode, we'd have to disable it again just to set the right maximum packet size field (1522 in 10/100 Mb/s mode or 9700 in 1000 Mb/s mode), just so that we can offload one comparison operation to hardware that we might as well do in software, assuming that we'd want to do it at all. Contrary to what the documentation suggests, there is no harm in just setting a 9700 byte maximum packet size in 10/100 mode, so use the maximum maximum packet size for all modes. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 3211369a4320..207d4391a6de 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -154,7 +154,6 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define SET_MII_SPEED_TO_100 (1 << 24) #define SET_GMII_SPEED_TO_1000 (1 << 23) #define SET_FULL_DUPLEX_MODE (1 << 21) -#define MAX_RX_PACKET_1522BYTE (1 << 17) #define MAX_RX_PACKET_9700BYTE (5 << 17) #define MAX_RX_PACKET_MASK (7 << 17) #define DISABLE_AUTO_NEG_SPEED_GMII (1 << 13) @@ -1674,13 +1673,12 @@ static void update_pscr(struct mv643xx_eth_private *mp, int speed, int duplex) SET_FULL_DUPLEX_MODE | MAX_RX_PACKET_MASK); - if (speed == SPEED_1000) { - pscr_n |= SET_GMII_SPEED_TO_1000 | MAX_RX_PACKET_9700BYTE; - } else { - if (speed == SPEED_100) - pscr_n |= SET_MII_SPEED_TO_100; - pscr_n |= MAX_RX_PACKET_1522BYTE; - } + pscr_n |= MAX_RX_PACKET_9700BYTE; + + if (speed == SPEED_1000) + pscr_n |= SET_GMII_SPEED_TO_1000; + else if (speed == SPEED_100) + pscr_n |= SET_MII_SPEED_TO_100; if (duplex == DUPLEX_FULL) pscr_n |= SET_FULL_DUPLEX_MODE; -- cgit v1.2.3 From ae9ae06443f7bfa4f013c0e2c035d549e999ad3e Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 15 Jul 2008 02:15:24 +0200 Subject: mv643xx_eth: also check TX_IN_PROGRESS when disabling transmit path The recommended sequence for waiting for the transmit path to clear after disabling all of the transmit queues is to wait for the TX_FIFO_EMPTY bit in the Port Status register to become set as well as the TX_IN_PROGRESS bit to clear. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 207d4391a6de..c700c1f494e9 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -90,6 +90,7 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define PORT_SERIAL_CONTROL(p) (0x043c + ((p) << 10)) #define PORT_STATUS(p) (0x0444 + ((p) << 10)) #define TX_FIFO_EMPTY 0x00000400 +#define TX_IN_PROGRESS 0x00000080 #define TXQ_COMMAND(p) (0x0448 + ((p) << 10)) #define TXQ_FIX_PRIO_CONF(p) (0x044c + ((p) << 10)) #define TX_BW_RATE(p) (0x0450 + ((p) << 10)) @@ -2039,8 +2040,14 @@ static void port_reset(struct mv643xx_eth_private *mp) if (mp->txq_mask & (1 << i)) txq_disable(mp->txq + i); } - while (!(rdl(mp, PORT_STATUS(mp->port_num)) & TX_FIFO_EMPTY)) + + while (1) { + u32 ps = rdl(mp, PORT_STATUS(mp->port_num)); + + if ((ps & (TX_IN_PROGRESS | TX_FIFO_EMPTY)) == TX_FIFO_EMPTY) + break; udelay(10); + } /* Reset the Enable bit in the Configuration Register */ data = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); -- cgit v1.2.3 From cd4ccf76bfd2c36d351e68be7e6a597268f98a1a Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 10 Jul 2008 14:40:51 +0200 Subject: mv643xx_eth: use longer DMA bursts The mv643xx_eth driver is limiting DMA bursts to 32 bytes, while using the largest burst size (128 bytes) gives a couple percentage points performance improvement in throughput tests, and the docs say that the 128 byte default should not need to be changed, so use 128 byte bursts instead. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index c700c1f494e9..9d200568d88a 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -129,21 +129,21 @@ static char mv643xx_eth_driver_version[] = "1.1"; /* * SDMA configuration register. */ -#define RX_BURST_SIZE_4_64BIT (2 << 1) +#define RX_BURST_SIZE_16_64BIT (4 << 1) #define BLM_RX_NO_SWAP (1 << 4) #define BLM_TX_NO_SWAP (1 << 5) -#define TX_BURST_SIZE_4_64BIT (2 << 22) +#define TX_BURST_SIZE_16_64BIT (4 << 22) #if defined(__BIG_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - RX_BURST_SIZE_4_64BIT | \ - TX_BURST_SIZE_4_64BIT + RX_BURST_SIZE_16_64BIT | \ + TX_BURST_SIZE_16_64BIT #elif defined(__LITTLE_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - RX_BURST_SIZE_4_64BIT | \ + RX_BURST_SIZE_16_64BIT | \ BLM_RX_NO_SWAP | \ BLM_TX_NO_SWAP | \ - TX_BURST_SIZE_4_64BIT + TX_BURST_SIZE_16_64BIT #else #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined #endif -- cgit v1.2.3 From 7f106c1d050c085c84d148ba56293e60b2c4e756 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 15 Jul 2008 02:28:47 +0200 Subject: mv643xx_eth: use symbolic MII register addresses and values Instead of hardcoding MII register addresses and values, use the symbolic constants defined in linux/mii.h. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 9d200568d88a..5bed6b33c7bc 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1831,14 +1831,14 @@ static void phy_reset(struct mv643xx_eth_private *mp) { unsigned int data; - smi_reg_read(mp, mp->phy_addr, 0, &data); - data |= 0x8000; - smi_reg_write(mp, mp->phy_addr, 0, data); + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data); + data |= BMCR_RESET; + smi_reg_write(mp, mp->phy_addr, MII_BMCR, data); do { udelay(1); - smi_reg_read(mp, mp->phy_addr, 0, &data); - } while (data & 0x8000); + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data); + } while (data & BMCR_RESET); } static void port_start(struct mv643xx_eth_private *mp) @@ -2385,14 +2385,14 @@ static int phy_detect(struct mv643xx_eth_private *mp) unsigned int data; unsigned int data2; - smi_reg_read(mp, mp->phy_addr, 0, &data); - smi_reg_write(mp, mp->phy_addr, 0, data ^ 0x1000); + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data); + smi_reg_write(mp, mp->phy_addr, MII_BMCR, data ^ BMCR_ANENABLE); - smi_reg_read(mp, mp->phy_addr, 0, &data2); - if (((data ^ data2) & 0x1000) == 0) + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data2); + if (((data ^ data2) & BMCR_ANENABLE) == 0) return -ENODEV; - smi_reg_write(mp, mp->phy_addr, 0, data); + smi_reg_write(mp, mp->phy_addr, MII_BMCR, data); return 0; } -- cgit v1.2.3 From 7dde154d3d0d9701ecfb5533017a8f1a20bb4214 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 15 Jul 2008 12:20:30 +0200 Subject: mv643xx_eth: print driver version on init Print the mv643xx_eth driver version on init to help debugging. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 5bed6b33c7bc..006ad45ddb84 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -2249,7 +2249,8 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev) int ret; if (!mv643xx_eth_version_printed++) - printk(KERN_NOTICE "MV-643xx 10/100/1000 Ethernet Driver\n"); + printk(KERN_NOTICE "MV-643xx 10/100/1000 ethernet " + "driver version %s\n", mv643xx_eth_driver_version); ret = -EINVAL; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- cgit v1.2.3 From 81600eea98789da09a32de69ca9d3be8b9503c54 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 14 Jul 2008 14:29:40 +0200 Subject: mv643xx_eth: use auto phy polling for configuring (R)(G)MII interface The mv643xx_eth hardware has a provision for polling the PHY's MII management registers to obtain the (R)(G)MII interface speed (10/100/1000) and duplex (half/full) and pause (off/symmetric) settings to use to talk to the PHY. The driver currently does not make use of this feature. Instead, whenever there is a link status change event, it reads the current link parameters from the PHY, and programs those parameters into the mv643xx_eth MAC by hand. This patch switches the mv643xx_eth driver to letting the MAC auto-determine the (R)(G)MII link parameters by PHY polling, if there is a PHY present. For PHYless ports (when e.g. the (R)(G)MII interface is connected to a hardware switch), we keep hardcoding the MII interface parameters. Signed-off-by: Lennert Buytenhek --- arch/arm/mach-kirkwood/rd88f6281-setup.c | 3 + arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c | 3 + arch/arm/mach-orion5x/rd88f5181l-ge-setup.c | 3 + arch/arm/mach-orion5x/wnr854t-setup.c | 3 + arch/arm/mach-orion5x/wrt350n-v2-setup.c | 3 + drivers/net/mv643xx_eth.c | 140 +++++++++++++-------------- 6 files changed, 81 insertions(+), 74 deletions(-) diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index e1f8de2c74a2..b6437f47a77f 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -69,6 +70,8 @@ static struct platform_device rd88f6281_nand_flash = { static struct mv643xx_eth_platform_data rd88f6281_ge00_data = { .phy_addr = -1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static struct mv_sata_platform_data rd88f6281_sata_data = { diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index d50e3650a09e..73e9242da7ad 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -88,6 +89,8 @@ static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = { static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = { .phy_addr = -1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static void __init rd88f5181l_fxo_init(void) diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index b56447d32e17..ac482019abbf 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -89,6 +90,8 @@ static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = { static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = { .phy_addr = -1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = { diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 1af093ff8cf3..25568c2a3d29 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -92,6 +93,8 @@ static struct platform_device wnr854t_nor_flash = { static struct mv643xx_eth_platform_data wnr854t_eth_data = { .phy_addr = -1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static void __init wnr854t_init(void) diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index aeab55c6a82d..9b8ee8c48bf0 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -100,6 +101,8 @@ static struct platform_device wrt350n_v2_nor_flash = { static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = { .phy_addr = -1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static void __init wrt350n_v2_init(void) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 006ad45ddb84..29d4fe37cd50 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -91,6 +91,7 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define PORT_STATUS(p) (0x0444 + ((p) << 10)) #define TX_FIFO_EMPTY 0x00000400 #define TX_IN_PROGRESS 0x00000080 +#define LINK_UP 0x00000002 #define TXQ_COMMAND(p) (0x0448 + ((p) << 10)) #define TXQ_FIX_PRIO_CONF(p) (0x044c + ((p) << 10)) #define TX_BW_RATE(p) (0x0450 + ((p) << 10)) @@ -156,7 +157,6 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define SET_GMII_SPEED_TO_1000 (1 << 23) #define SET_FULL_DUPLEX_MODE (1 << 21) #define MAX_RX_PACKET_9700BYTE (5 << 17) -#define MAX_RX_PACKET_MASK (7 << 17) #define DISABLE_AUTO_NEG_SPEED_GMII (1 << 13) #define DO_NOT_FORCE_LINK_FAIL (1 << 10) #define SERIAL_PORT_CONTROL_RESERVED (1 << 9) @@ -1135,10 +1135,28 @@ static int mv643xx_eth_get_settings(struct net_device *dev, struct ethtool_cmd * static int mv643xx_eth_get_settings_phyless(struct net_device *dev, struct ethtool_cmd *cmd) { + struct mv643xx_eth_private *mp = netdev_priv(dev); + u32 port_status; + + port_status = rdl(mp, PORT_STATUS(mp->port_num)); + cmd->supported = SUPPORTED_MII; cmd->advertising = ADVERTISED_MII; - cmd->speed = SPEED_1000; - cmd->duplex = DUPLEX_FULL; + switch (port_status & PORT_SPEED_MASK) { + case PORT_SPEED_10: + cmd->speed = SPEED_10; + break; + case PORT_SPEED_100: + cmd->speed = SPEED_100; + break; + case PORT_SPEED_1000: + cmd->speed = SPEED_1000; + break; + default: + cmd->speed = -1; + break; + } + cmd->duplex = (port_status & FULL_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF; cmd->port = PORT_MII; cmd->phy_address = 0; cmd->transceiver = XCVR_INTERNAL; @@ -1661,51 +1679,6 @@ static void txq_deinit(struct tx_queue *txq) /* netdev ops and related ***************************************************/ -static void update_pscr(struct mv643xx_eth_private *mp, int speed, int duplex) -{ - u32 pscr_o; - u32 pscr_n; - - pscr_o = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); - - /* clear speed, duplex and rx buffer size fields */ - pscr_n = pscr_o & ~(SET_MII_SPEED_TO_100 | - SET_GMII_SPEED_TO_1000 | - SET_FULL_DUPLEX_MODE | - MAX_RX_PACKET_MASK); - - pscr_n |= MAX_RX_PACKET_9700BYTE; - - if (speed == SPEED_1000) - pscr_n |= SET_GMII_SPEED_TO_1000; - else if (speed == SPEED_100) - pscr_n |= SET_MII_SPEED_TO_100; - - if (duplex == DUPLEX_FULL) - pscr_n |= SET_FULL_DUPLEX_MODE; - - if (pscr_n != pscr_o) { - if ((pscr_o & SERIAL_PORT_ENABLE) == 0) - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n); - else { - int i; - - for (i = 0; i < 8; i++) - if (mp->txq_mask & (1 << i)) - txq_disable(mp->txq + i); - - pscr_o &= ~SERIAL_PORT_ENABLE; - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_o); - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n); - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n); - - for (i = 0; i < 8; i++) - if (mp->txq_mask & (1 << i)) - txq_enable(mp->txq + i); - } - } -} - static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) { struct net_device *dev = (struct net_device *)dev_id; @@ -1726,14 +1699,7 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) } if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) { - if (mp->phy_addr == -1 || mii_link_ok(&mp->mii)) { - if (mp->phy_addr != -1) { - struct ethtool_cmd cmd; - - mii_ethtool_gset(&mp->mii, &cmd); - update_pscr(mp, cmd.speed, cmd.duplex); - } - + if (rdl(mp, PORT_STATUS(mp->port_num)) & LINK_UP) { if (!netif_carrier_ok(dev)) { netif_carrier_on(dev); netif_wake_queue(dev); @@ -1846,23 +1812,6 @@ static void port_start(struct mv643xx_eth_private *mp) u32 pscr; int i; - /* - * Configure basic link parameters. - */ - pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); - pscr &= ~(SERIAL_PORT_ENABLE | FORCE_LINK_PASS); - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); - pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL | - DISABLE_AUTO_NEG_SPEED_GMII | - DISABLE_AUTO_NEG_FOR_DUPLEX | - DO_NOT_FORCE_LINK_FAIL | - SERIAL_PORT_CONTROL_RESERVED; - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); - pscr |= SERIAL_PORT_ENABLE; - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); - - wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE); - /* * Perform PHY reset, if there is a PHY. */ @@ -1874,6 +1823,21 @@ static void port_start(struct mv643xx_eth_private *mp) mv643xx_eth_set_settings(mp->dev, &cmd); } + /* + * Configure basic link parameters. + */ + pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); + + pscr |= SERIAL_PORT_ENABLE; + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); + + pscr |= DO_NOT_FORCE_LINK_FAIL; + if (mp->phy_addr == -1) + pscr |= FORCE_LINK_PASS; + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); + + wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE); + /* * Configure TX path and queues. */ @@ -2441,12 +2405,39 @@ static int phy_init(struct mv643xx_eth_private *mp, cmd.duplex = pd->duplex; } - update_pscr(mp, cmd.speed, cmd.duplex); mv643xx_eth_set_settings(mp->dev, &cmd); return 0; } +static void init_pscr(struct mv643xx_eth_private *mp, int speed, int duplex) +{ + u32 pscr; + + pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); + if (pscr & SERIAL_PORT_ENABLE) { + pscr &= ~SERIAL_PORT_ENABLE; + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); + } + + pscr = MAX_RX_PACKET_9700BYTE | SERIAL_PORT_CONTROL_RESERVED; + if (mp->phy_addr == -1) { + pscr |= DISABLE_AUTO_NEG_SPEED_GMII; + if (speed == SPEED_1000) + pscr |= SET_GMII_SPEED_TO_1000; + else if (speed == SPEED_100) + pscr |= SET_MII_SPEED_TO_100; + + pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL; + + pscr |= DISABLE_AUTO_NEG_FOR_DUPLEX; + if (duplex == DUPLEX_FULL) + pscr |= SET_FULL_DUPLEX_MODE; + } + + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); +} + static int mv643xx_eth_probe(struct platform_device *pdev) { struct mv643xx_eth_platform_data *pd; @@ -2500,6 +2491,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev) } else { SET_ETHTOOL_OPS(dev, &mv643xx_eth_ethtool_ops_phyless); } + init_pscr(mp, pd->speed, pd->duplex); res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); -- cgit v1.2.3 From 2f7eb47a7b9f703d4f7dfdab358df6ff1f2a2204 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 24 Jul 2008 06:22:59 +0200 Subject: mv643xx_eth: print message on link status change When there is a link status change (link or phy status interrupt), print a message notifying the user of the new link status. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 91 +++++++++++++++++++++++++++++++++++------------ 1 file changed, 69 insertions(+), 22 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 29d4fe37cd50..01dd3c505d25 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -91,6 +91,12 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define PORT_STATUS(p) (0x0444 + ((p) << 10)) #define TX_FIFO_EMPTY 0x00000400 #define TX_IN_PROGRESS 0x00000080 +#define PORT_SPEED_MASK 0x00000030 +#define PORT_SPEED_1000 0x00000010 +#define PORT_SPEED_100 0x00000020 +#define PORT_SPEED_10 0x00000000 +#define FLOW_CONTROL_ENABLED 0x00000008 +#define FULL_DUPLEX 0x00000004 #define LINK_UP 0x00000002 #define TXQ_COMMAND(p) (0x0448 + ((p) << 10)) #define TXQ_FIX_PRIO_CONF(p) (0x044c + ((p) << 10)) @@ -1679,6 +1685,64 @@ static void txq_deinit(struct tx_queue *txq) /* netdev ops and related ***************************************************/ +static void handle_link_event(struct mv643xx_eth_private *mp) +{ + struct net_device *dev = mp->dev; + u32 port_status; + int speed; + int duplex; + int fc; + + port_status = rdl(mp, PORT_STATUS(mp->port_num)); + if (!(port_status & LINK_UP)) { + if (netif_carrier_ok(dev)) { + int i; + + printk(KERN_INFO "%s: link down\n", dev->name); + + netif_carrier_off(dev); + netif_stop_queue(dev); + + for (i = 0; i < 8; i++) { + struct tx_queue *txq = mp->txq + i; + + if (mp->txq_mask & (1 << i)) { + txq_reclaim(txq, 1); + txq_reset_hw_ptr(txq); + } + } + } + return; + } + + switch (port_status & PORT_SPEED_MASK) { + case PORT_SPEED_10: + speed = 10; + break; + case PORT_SPEED_100: + speed = 100; + break; + case PORT_SPEED_1000: + speed = 1000; + break; + default: + speed = -1; + break; + } + duplex = (port_status & FULL_DUPLEX) ? 1 : 0; + fc = (port_status & FLOW_CONTROL_ENABLED) ? 1 : 0; + + printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, " + "flow control %sabled\n", dev->name, + speed, duplex ? "full" : "half", + fc ? "en" : "dis"); + + if (!netif_carrier_ok(dev)) { + netif_carrier_on(dev); + netif_wake_queue(dev); + } +} + static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) { struct net_device *dev = (struct net_device *)dev_id; @@ -1698,28 +1762,8 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) wrl(mp, INT_CAUSE_EXT(mp->port_num), ~int_cause_ext); } - if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) { - if (rdl(mp, PORT_STATUS(mp->port_num)) & LINK_UP) { - if (!netif_carrier_ok(dev)) { - netif_carrier_on(dev); - netif_wake_queue(dev); - } - } else if (netif_carrier_ok(dev)) { - int i; - - netif_stop_queue(dev); - netif_carrier_off(dev); - - for (i = 0; i < 8; i++) { - struct tx_queue *txq = mp->txq + i; - - if (mp->txq_mask & (1 << i)) { - txq_reclaim(txq, 1); - txq_reset_hw_ptr(txq); - } - } - } - } + if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) + handle_link_event(mp); /* * RxBuffer or RxError set for any of the 8 queues? @@ -1970,6 +2014,9 @@ static int mv643xx_eth_open(struct net_device *dev) napi_enable(&mp->napi); #endif + netif_carrier_off(dev); + netif_stop_queue(dev); + port_start(mp); set_rx_coal(mp, 0); -- cgit v1.2.3 From e32b66175072d75bde1ddca4227a6723ca17e0af Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 24 Jul 2008 06:22:59 +0200 Subject: mv643xx_eth: enable hardware TX checksumming with vlan tags Although mv643xx_eth has no hardware support for inserting a vlan tag by twiddling some bits in the TX descriptor, it does support hardware TX checksumming on packets where the IP header starts {a limited set of values other than 14} bytes into the packet. This patch sets mv643xx_eth's ->vlan_features to NETIF_F_SG | NETIF_F_IP_CSUM, which prevents the stack from checksumming vlan'ed packets in software, and if vlan tags are present on a transmitted packet, notifies the hardware of this fact by toggling the right bits in the TX descriptor. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 01dd3c505d25..88bb1f1e8065 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -235,6 +235,8 @@ struct tx_desc { #define GEN_IP_V4_CHECKSUM 0x00040000 #define GEN_TCP_UDP_CHECKSUM 0x00020000 #define UDP_FRAME 0x00010000 +#define MAC_HDR_EXTRA_4_BYTES 0x00008000 +#define MAC_HDR_EXTRA_8_BYTES 0x00000200 #define TX_IHL_SHIFT 11 @@ -757,12 +759,36 @@ static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb) desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE); if (skb->ip_summed == CHECKSUM_PARTIAL) { - BUG_ON(skb->protocol != htons(ETH_P_IP)); + int mac_hdr_len; + + BUG_ON(skb->protocol != htons(ETH_P_IP) && + skb->protocol != htons(ETH_P_8021Q)); cmd_sts |= GEN_TCP_UDP_CHECKSUM | GEN_IP_V4_CHECKSUM | ip_hdr(skb)->ihl << TX_IHL_SHIFT; + mac_hdr_len = (void *)ip_hdr(skb) - (void *)skb->data; + switch (mac_hdr_len - ETH_HLEN) { + case 0: + break; + case 4: + cmd_sts |= MAC_HDR_EXTRA_4_BYTES; + break; + case 8: + cmd_sts |= MAC_HDR_EXTRA_8_BYTES; + break; + case 12: + cmd_sts |= MAC_HDR_EXTRA_4_BYTES; + cmd_sts |= MAC_HDR_EXTRA_8_BYTES; + break; + default: + if (net_ratelimit()) + dev_printk(KERN_ERR, &txq_to_mp(txq)->dev->dev, + "mac header length is %d?!\n", mac_hdr_len); + break; + } + switch (ip_hdr(skb)->protocol) { case IPPROTO_UDP: cmd_sts |= UDP_FRAME; @@ -2565,6 +2591,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev) * have to map the buffers to ISA memory which is only 16 MB */ dev->features = NETIF_F_SG | NETIF_F_IP_CSUM; + dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM; #endif SET_NETDEV_DEV(dev, &pdev->dev); -- cgit v1.2.3 From ac0a2d0c8ab18045ab217339a71e76c76e186ede Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 15 Jul 2008 12:26:16 +0200 Subject: mv643xx_eth: bump version to 1.2 Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 88bb1f1e8065..46819af3b062 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -55,7 +55,7 @@ #include static char mv643xx_eth_driver_name[] = "mv643xx_eth"; -static char mv643xx_eth_driver_version[] = "1.1"; +static char mv643xx_eth_driver_version[] = "1.2"; #define MV643XX_ETH_CHECKSUM_OFFLOAD_TX #define MV643XX_ETH_NAPI -- cgit v1.2.3 From ec05e868ac80cc8fc7de6e5cf773b232198e49af Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 24 Jul 2008 12:49:59 -0400 Subject: ext4: improve ext4_fill_flex_info() a bit - use kzalloc() instead of kmalloc() + memset() - improve a printk info Signed-off-by: Li Zefan Signed-off-by: Theodore Ts'o --- fs/ext4/super.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 511997ef6f0e..e34fc2d6dbf5 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1506,14 +1506,13 @@ static int ext4_fill_flex_info(struct super_block *sb) flex_group_count = (sbi->s_groups_count + groups_per_flex - 1) / groups_per_flex; - sbi->s_flex_groups = kmalloc(flex_group_count * + sbi->s_flex_groups = kzalloc(flex_group_count * sizeof(struct flex_groups), GFP_KERNEL); if (sbi->s_flex_groups == NULL) { - printk(KERN_ERR "EXT4-fs: not enough memory\n"); + printk(KERN_ERR "EXT4-fs: not enough memory for " + "%lu flex groups\n", flex_group_count); goto failed; } - memset(sbi->s_flex_groups, 0, flex_group_count * - sizeof(struct flex_groups)); gdp = ext4_get_group_desc(sb, 1, &bh); block_bitmap = ext4_block_bitmap(sb, gdp) - 1; -- cgit v1.2.3 From 0b21bb49187a863e3fc3c4f3356baf03578a9d1a Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 25 Jul 2008 14:22:02 -0500 Subject: powerpc: clean up the Book-E HW watchpoint support * CONFIG_BOOKE is selected by CONFIG_44x so we dont need both * Fixed a few comments * Go back to only using DBCR0_IDM to determine if we are using debug resources. Signed-off-by: Kumar Gala --- arch/powerpc/kernel/entry_32.S | 6 +++--- arch/powerpc/kernel/process.c | 8 ++++---- arch/powerpc/kernel/ptrace.c | 7 ++++--- arch/powerpc/kernel/signal.c | 2 +- 4 files changed, 12 insertions(+), 11 deletions(-) diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 81c8324a4a3c..da52269aec1e 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -148,7 +148,7 @@ transfer_to_handler: /* Check to see if the dbcr0 register is set up to debug. Use the internal debug mode bit to do this. */ lwz r12,THREAD_DBCR0(r12) - andis. r12,r12,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h + andis. r12,r12,DBCR0_IDM@h beq+ 3f /* From user and task is ptraced - load up global dbcr0 */ li r12,-1 /* clear all pending debug events */ @@ -292,7 +292,7 @@ syscall_exit_cont: /* If the process has its own DBCR0 value, load it up. The internal debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h + andis. r10,r0,DBCR0_IDM@h bnel- load_dbcr0 #endif #ifdef CONFIG_44x @@ -720,7 +720,7 @@ restore_user: /* Check whether this process has its own DBCR0 value. The internal debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h + andis. r10,r0,DBCR0_IDM@h bnel- load_dbcr0 #endif diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index db2497ccc111..e030f3bd5024 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -254,7 +254,7 @@ void do_dabr(struct pt_regs *regs, unsigned long address, return; /* Clear the DAC and struct entries. One shot trigger */ -#if (defined(CONFIG_44x) || defined(CONFIG_BOOKE)) +#if defined(CONFIG_BOOKE) mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM)); #endif @@ -286,7 +286,7 @@ int set_dabr(unsigned long dabr) mtspr(SPRN_DABR, dabr); #endif -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) mtspr(SPRN_DAC1, dabr); #endif @@ -373,7 +373,7 @@ struct task_struct *__switch_to(struct task_struct *prev, if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) set_dabr(new->thread.dabr); -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) /* If new thread DAC (HW breakpoint) is the same then leave it */ if (new->thread.dabr) set_dabr(new->thread.dabr); @@ -568,7 +568,7 @@ void flush_thread(void) current->thread.dabr = 0; set_dabr(0); -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W); #endif } diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index a5d0e78779c8..66204cb51a1a 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -717,7 +717,7 @@ void user_disable_single_step(struct task_struct *task) struct pt_regs *regs = task->thread.regs; -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) /* If DAC then do not single step, skip */ if (task->thread.dabr) return; @@ -744,10 +744,11 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, if (addr > 0) return -EINVAL; + /* The bottom 3 bits in dabr are flags */ if ((data & ~0x7UL) >= TASK_SIZE) return -EIO; -#ifdef CONFIG_PPC64 +#ifndef CONFIG_BOOKE /* For processors using DABR (i.e. 970), the bottom 3 bits are flags. * It was assumed, on previous implementations, that 3 bits were @@ -769,7 +770,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, task->thread.dabr = data; #endif -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) /* As described above, it was assumed 3 bits were passed with the data * address, but we will assume only the mode bits will be passed diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 7aada783ec6a..2b5eaa6c8f33 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -147,7 +147,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) */ if (current->thread.dabr) { set_dabr(current->thread.dabr); -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) mtspr(SPRN_DBCR0, current->thread.dbcr0); #endif } -- cgit v1.2.3 From 6ffac1e90a17ea0aded5c581204397421eec91b6 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 24 Jul 2008 18:07:56 -0700 Subject: x64, fpu: fix possible FPU leakage in error conditions On Thu, Jul 24, 2008 at 03:43:44PM -0700, Linus Torvalds wrote: > So how about this patch as a starting point? This is the RightThing(tm) to > do regardless, and if it then makes it easier to do some other cleanups, > we should do it first. What do you think? restore_fpu_checking() calls init_fpu() in error conditions. While this is wrong(as our main intention is to clear the fpu state of the thread), this was benign before commit 92d140e21f1 ("x86: fix taking DNA during 64bit sigreturn"). Post commit 92d140e21f1, live FPU registers may not belong to this process at this error scenario. In the error condition for restore_fpu_checking() (especially during the 64bit signal return), we are doing init_fpu(), which saves the live FPU register state (possibly belonging to some other process context) into the thread struct (through unlazy_fpu() in init_fpu()). This is wrong and can leak the FPU data. For the signal handler restore error condition in restore_i387(), clear the fpu state present in the thread struct(before ultimately sending a SIGSEGV for badframe). For the paranoid error condition check in math_state_restore(), send a SIGSEGV, if we fail to restore the state. Signed-off-by: Suresh Siddha Cc: Cc: Linus Torvalds Signed-off-by: Ingo Molnar --- arch/x86/kernel/signal_64.c | 11 ++++++++++- arch/x86/kernel/traps_64.c | 9 ++++++++- include/asm-x86/i387.h | 2 -- 3 files changed, 18 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c index b45ef8ddd651..ca316b5b742c 100644 --- a/arch/x86/kernel/signal_64.c +++ b/arch/x86/kernel/signal_64.c @@ -104,7 +104,16 @@ static inline int restore_i387(struct _fpstate __user *buf) clts(); task_thread_info(current)->status |= TS_USEDFPU; } - return restore_fpu_checking((__force struct i387_fxsave_struct *)buf); + err = restore_fpu_checking((__force struct i387_fxsave_struct *)buf); + if (unlikely(err)) { + /* + * Encountered an error while doing the restore from the + * user buffer, clear the fpu state. + */ + clear_fpu(tsk); + clear_used_math(); + } + return err; } /* diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index 3f18d73f420c..513caaca7115 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -1131,7 +1131,14 @@ asmlinkage void math_state_restore(void) } clts(); /* Allow maths ops (or we recurse) */ - restore_fpu_checking(&me->thread.xstate->fxsave); + /* + * Paranoid restore. send a SIGSEGV if we fail to restore the state. + */ + if (unlikely(restore_fpu_checking(&me->thread.xstate->fxsave))) { + stts(); + force_sig(SIGSEGV, me); + return; + } task_thread_info(me)->status |= TS_USEDFPU; me->fpu_counter++; } diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h index 96fa8449ff11..0048fb77afc4 100644 --- a/include/asm-x86/i387.h +++ b/include/asm-x86/i387.h @@ -62,8 +62,6 @@ static inline int restore_fpu_checking(struct i387_fxsave_struct *fx) #else : [fx] "cdaSDb" (fx), "m" (*fx), "0" (0)); #endif - if (unlikely(err)) - init_fpu(current); return err; } -- cgit v1.2.3 From 4c920de37d29284d4cb65d76a97a567247c2ac32 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 26 Jul 2008 12:55:09 -0500 Subject: powerpc: Fix 8xx build failure The 'powerpc ioremap_prot' broke 8xx builds: include2/asm/pgtable-ppc32.h:555: error: '_PAGE_WRITETHRU' undeclared (first use in this function) include2/asm/pgtable-ppc32.h:555: error: (Each undeclared identifier is reported only once include2/asm/pgtable-ppc32.h:555: error: for each function it appears in.) Signed-off-by: Kumar Gala --- include/asm-powerpc/pgtable-ppc32.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h index bdbab72f3ebc..6fe39e327047 100644 --- a/include/asm-powerpc/pgtable-ppc32.h +++ b/include/asm-powerpc/pgtable-ppc32.h @@ -401,6 +401,9 @@ extern int icache_44x_need_flush; #ifndef _PAGE_COHERENT #define _PAGE_COHERENT 0 #endif +#ifndef _PAGE_WRITETHRU +#define _PAGE_WRITETHRU 0 +#endif #ifndef _PMD_PRESENT_MASK #define _PMD_PRESENT_MASK _PMD_PRESENT #endif -- cgit v1.2.3 From 2b2d6d019724de6e51ac5bcf22b5ef969daefa8b Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 26 Jul 2008 16:15:44 -0400 Subject: ext4: Cleanup whitespace and other miscellaneous style issues Signed-off-by: "Theodore Ts'o" --- fs/ext4/acl.c | 188 ++++++++++++++++++------------------ fs/ext4/extents.c | 2 +- fs/ext4/inode.c | 5 +- fs/ext4/resize.c | 79 +++++++-------- fs/ext4/super.c | 283 +++++++++++++++++++++++++++--------------------------- fs/ext4/xattr.c | 2 +- 6 files changed, 277 insertions(+), 282 deletions(-) diff --git a/fs/ext4/acl.c b/fs/ext4/acl.c index c7d04e165446..694ed6fadcc8 100644 --- a/fs/ext4/acl.c +++ b/fs/ext4/acl.c @@ -40,34 +40,35 @@ ext4_acl_from_disk(const void *value, size_t size) acl = posix_acl_alloc(count, GFP_NOFS); if (!acl) return ERR_PTR(-ENOMEM); - for (n=0; n < count; n++) { + for (n = 0; n < count; n++) { ext4_acl_entry *entry = (ext4_acl_entry *)value; if ((char *)value + sizeof(ext4_acl_entry_short) > end) goto fail; acl->a_entries[n].e_tag = le16_to_cpu(entry->e_tag); acl->a_entries[n].e_perm = le16_to_cpu(entry->e_perm); - switch(acl->a_entries[n].e_tag) { - case ACL_USER_OBJ: - case ACL_GROUP_OBJ: - case ACL_MASK: - case ACL_OTHER: - value = (char *)value + - sizeof(ext4_acl_entry_short); - acl->a_entries[n].e_id = ACL_UNDEFINED_ID; - break; - - case ACL_USER: - case ACL_GROUP: - value = (char *)value + sizeof(ext4_acl_entry); - if ((char *)value > end) - goto fail; - acl->a_entries[n].e_id = - le32_to_cpu(entry->e_id); - break; - - default: + + switch (acl->a_entries[n].e_tag) { + case ACL_USER_OBJ: + case ACL_GROUP_OBJ: + case ACL_MASK: + case ACL_OTHER: + value = (char *)value + + sizeof(ext4_acl_entry_short); + acl->a_entries[n].e_id = ACL_UNDEFINED_ID; + break; + + case ACL_USER: + case ACL_GROUP: + value = (char *)value + sizeof(ext4_acl_entry); + if ((char *)value > end) goto fail; + acl->a_entries[n].e_id = + le32_to_cpu(entry->e_id); + break; + + default: + goto fail; } } if (value != end) @@ -96,27 +97,26 @@ ext4_acl_to_disk(const struct posix_acl *acl, size_t *size) return ERR_PTR(-ENOMEM); ext_acl->a_version = cpu_to_le32(EXT4_ACL_VERSION); e = (char *)ext_acl + sizeof(ext4_acl_header); - for (n=0; n < acl->a_count; n++) { + for (n = 0; n < acl->a_count; n++) { ext4_acl_entry *entry = (ext4_acl_entry *)e; entry->e_tag = cpu_to_le16(acl->a_entries[n].e_tag); entry->e_perm = cpu_to_le16(acl->a_entries[n].e_perm); - switch(acl->a_entries[n].e_tag) { - case ACL_USER: - case ACL_GROUP: - entry->e_id = - cpu_to_le32(acl->a_entries[n].e_id); - e += sizeof(ext4_acl_entry); - break; - - case ACL_USER_OBJ: - case ACL_GROUP_OBJ: - case ACL_MASK: - case ACL_OTHER: - e += sizeof(ext4_acl_entry_short); - break; - - default: - goto fail; + switch (acl->a_entries[n].e_tag) { + case ACL_USER: + case ACL_GROUP: + entry->e_id = cpu_to_le32(acl->a_entries[n].e_id); + e += sizeof(ext4_acl_entry); + break; + + case ACL_USER_OBJ: + case ACL_GROUP_OBJ: + case ACL_MASK: + case ACL_OTHER: + e += sizeof(ext4_acl_entry_short); + break; + + default: + goto fail; } } return (char *)ext_acl; @@ -167,23 +167,23 @@ ext4_get_acl(struct inode *inode, int type) if (!test_opt(inode->i_sb, POSIX_ACL)) return NULL; - switch(type) { - case ACL_TYPE_ACCESS: - acl = ext4_iget_acl(inode, &ei->i_acl); - if (acl != EXT4_ACL_NOT_CACHED) - return acl; - name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS; - break; - - case ACL_TYPE_DEFAULT: - acl = ext4_iget_acl(inode, &ei->i_default_acl); - if (acl != EXT4_ACL_NOT_CACHED) - return acl; - name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT; - break; - - default: - return ERR_PTR(-EINVAL); + switch (type) { + case ACL_TYPE_ACCESS: + acl = ext4_iget_acl(inode, &ei->i_acl); + if (acl != EXT4_ACL_NOT_CACHED) + return acl; + name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS; + break; + + case ACL_TYPE_DEFAULT: + acl = ext4_iget_acl(inode, &ei->i_default_acl); + if (acl != EXT4_ACL_NOT_CACHED) + return acl; + name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT; + break; + + default: + return ERR_PTR(-EINVAL); } retval = ext4_xattr_get(inode, name_index, "", NULL, 0); if (retval > 0) { @@ -201,14 +201,14 @@ ext4_get_acl(struct inode *inode, int type) kfree(value); if (!IS_ERR(acl)) { - switch(type) { - case ACL_TYPE_ACCESS: - ext4_iset_acl(inode, &ei->i_acl, acl); - break; - - case ACL_TYPE_DEFAULT: - ext4_iset_acl(inode, &ei->i_default_acl, acl); - break; + switch (type) { + case ACL_TYPE_ACCESS: + ext4_iset_acl(inode, &ei->i_acl, acl); + break; + + case ACL_TYPE_DEFAULT: + ext4_iset_acl(inode, &ei->i_default_acl, acl); + break; } } return acl; @@ -232,31 +232,31 @@ ext4_set_acl(handle_t *handle, struct inode *inode, int type, if (S_ISLNK(inode->i_mode)) return -EOPNOTSUPP; - switch(type) { - case ACL_TYPE_ACCESS: - name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS; - if (acl) { - mode_t mode = inode->i_mode; - error = posix_acl_equiv_mode(acl, &mode); - if (error < 0) - return error; - else { - inode->i_mode = mode; - ext4_mark_inode_dirty(handle, inode); - if (error == 0) - acl = NULL; - } + switch (type) { + case ACL_TYPE_ACCESS: + name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS; + if (acl) { + mode_t mode = inode->i_mode; + error = posix_acl_equiv_mode(acl, &mode); + if (error < 0) + return error; + else { + inode->i_mode = mode; + ext4_mark_inode_dirty(handle, inode); + if (error == 0) + acl = NULL; } - break; + } + break; - case ACL_TYPE_DEFAULT: - name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT; - if (!S_ISDIR(inode->i_mode)) - return acl ? -EACCES : 0; - break; + case ACL_TYPE_DEFAULT: + name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT; + if (!S_ISDIR(inode->i_mode)) + return acl ? -EACCES : 0; + break; - default: - return -EINVAL; + default: + return -EINVAL; } if (acl) { value = ext4_acl_to_disk(acl, &size); @@ -269,14 +269,14 @@ ext4_set_acl(handle_t *handle, struct inode *inode, int type, kfree(value); if (!error) { - switch(type) { - case ACL_TYPE_ACCESS: - ext4_iset_acl(inode, &ei->i_acl, acl); - break; - - case ACL_TYPE_DEFAULT: - ext4_iset_acl(inode, &ei->i_default_acl, acl); - break; + switch (type) { + case ACL_TYPE_ACCESS: + ext4_iset_acl(inode, &ei->i_acl, acl); + break; + + case ACL_TYPE_DEFAULT: + ext4_iset_acl(inode, &ei->i_default_acl, acl); + break; } } return error; diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index f7529e27d791..612c3d2c3824 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -1441,7 +1441,7 @@ unsigned int ext4_ext_check_overlap(struct inode *inode, /* * get the next allocated block if the extent in the path - * is before the requested block(s) + * is before the requested block(s) */ if (b2 < b1) { b2 = ext4_ext_next_allocated_block(path); diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 85a862c9c4cc..0080999d2cd4 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1054,10 +1054,9 @@ static void ext4_da_update_reserve_space(struct inode *inode, int used) /* + * The ext4_get_blocks_wrap() function try to look up the requested blocks, + * and returns if the blocks are already mapped. * - * - * ext4_ext4 get_block() wrapper function - * It will do a look up first, and returns if the blocks already mapped. * Otherwise it takes the write lock of the i_data_sem and allocate blocks * and store the allocated blocks in the result buffer head and mark it * mapped. diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index f000fbe2cd93..0a9265164265 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -73,7 +73,7 @@ static int verify_group_input(struct super_block *sb, "Inode bitmap not in group (block %llu)", (unsigned long long)input->inode_bitmap); else if (outside(input->inode_table, start, end) || - outside(itend - 1, start, end)) + outside(itend - 1, start, end)) ext4_warning(sb, __func__, "Inode table not in group (blocks %llu-%llu)", (unsigned long long)input->inode_table, itend - 1); @@ -104,7 +104,7 @@ static int verify_group_input(struct super_block *sb, (unsigned long long)input->inode_bitmap, start, metaend - 1); else if (inside(input->inode_table, start, metaend) || - inside(itend - 1, start, metaend)) + inside(itend - 1, start, metaend)) ext4_warning(sb, __func__, "Inode table (%llu-%llu) overlaps" "GDT table (%llu-%llu)", @@ -158,9 +158,9 @@ static int extend_or_restart_transaction(handle_t *handle, int thresh, if (err) { if ((err = ext4_journal_restart(handle, EXT4_MAX_TRANS_DATA))) return err; - if ((err = ext4_journal_get_write_access(handle, bh))) + if ((err = ext4_journal_get_write_access(handle, bh))) return err; - } + } return 0; } @@ -416,11 +416,11 @@ static int add_new_gdb(handle_t *handle, struct inode *inode, "EXT4-fs: ext4_add_new_gdb: adding group block %lu\n", gdb_num); - /* - * If we are not using the primary superblock/GDT copy don't resize, - * because the user tools have no way of handling this. Probably a - * bad time to do it anyways. - */ + /* + * If we are not using the primary superblock/GDT copy don't resize, + * because the user tools have no way of handling this. Probably a + * bad time to do it anyways. + */ if (EXT4_SB(sb)->s_sbh->b_blocknr != le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block)) { ext4_warning(sb, __func__, @@ -507,14 +507,14 @@ static int add_new_gdb(handle_t *handle, struct inode *inode, return 0; exit_inode: - //ext4_journal_release_buffer(handle, iloc.bh); + /* ext4_journal_release_buffer(handle, iloc.bh); */ brelse(iloc.bh); exit_dindj: - //ext4_journal_release_buffer(handle, dind); + /* ext4_journal_release_buffer(handle, dind); */ exit_primary: - //ext4_journal_release_buffer(handle, *primary); + /* ext4_journal_release_buffer(handle, *primary); */ exit_sbh: - //ext4_journal_release_buffer(handle, *primary); + /* ext4_journal_release_buffer(handle, *primary); */ exit_dind: brelse(dind); exit_bh: @@ -818,12 +818,12 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input) if ((err = ext4_journal_get_write_access(handle, sbi->s_sbh))) goto exit_journal; - /* - * We will only either add reserved group blocks to a backup group - * or remove reserved blocks for the first group in a new group block. - * Doing both would be mean more complex code, and sane people don't - * use non-sparse filesystems anymore. This is already checked above. - */ + /* + * We will only either add reserved group blocks to a backup group + * or remove reserved blocks for the first group in a new group block. + * Doing both would be mean more complex code, and sane people don't + * use non-sparse filesystems anymore. This is already checked above. + */ if (gdb_off) { primary = sbi->s_group_desc[gdb_num]; if ((err = ext4_journal_get_write_access(handle, primary))) @@ -835,24 +835,24 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input) } else if ((err = add_new_gdb(handle, inode, input, &primary))) goto exit_journal; - /* - * OK, now we've set up the new group. Time to make it active. - * - * Current kernels don't lock all allocations via lock_super(), - * so we have to be safe wrt. concurrent accesses the group - * data. So we need to be careful to set all of the relevant - * group descriptor data etc. *before* we enable the group. - * - * The key field here is sbi->s_groups_count: as long as - * that retains its old value, nobody is going to access the new - * group. - * - * So first we update all the descriptor metadata for the new - * group; then we update the total disk blocks count; then we - * update the groups count to enable the group; then finally we - * update the free space counts so that the system can start - * using the new disk blocks. - */ + /* + * OK, now we've set up the new group. Time to make it active. + * + * Current kernels don't lock all allocations via lock_super(), + * so we have to be safe wrt. concurrent accesses the group + * data. So we need to be careful to set all of the relevant + * group descriptor data etc. *before* we enable the group. + * + * The key field here is sbi->s_groups_count: as long as + * that retains its old value, nobody is going to access the new + * group. + * + * So first we update all the descriptor metadata for the new + * group; then we update the total disk blocks count; then we + * update the groups count to enable the group; then finally we + * update the free space counts so that the system can start + * using the new disk blocks. + */ /* Update group descriptor block for new group */ gdp = (struct ext4_group_desc *)((char *)primary->b_data + @@ -946,7 +946,8 @@ exit_put: return err; } /* ext4_group_add */ -/* Extend the filesystem to the new number of blocks specified. This entry +/* + * Extend the filesystem to the new number of blocks specified. This entry * point is only used to extend the current filesystem to the end of the last * existing group. It can be accessed via ioctl, or by "remount,resize=" * for emergencies (because it has no dependencies on reserved blocks). @@ -1024,7 +1025,7 @@ int ext4_group_extend(struct super_block *sb, struct ext4_super_block *es, o_blocks_count + add, add); /* See if the device is actually as big as what was requested */ - bh = sb_bread(sb, o_blocks_count + add -1); + bh = sb_bread(sb, o_blocks_count + add - 1); if (!bh) { ext4_warning(sb, __func__, "can't read last block, resize aborted"); diff --git a/fs/ext4/super.c b/fs/ext4/super.c index e34fc2d6dbf5..09e3c56782a7 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -49,20 +49,19 @@ static int ext4_load_journal(struct super_block *, struct ext4_super_block *, unsigned long journal_devnum); static int ext4_create_journal(struct super_block *, struct ext4_super_block *, unsigned int); -static void ext4_commit_super (struct super_block * sb, - struct ext4_super_block * es, - int sync); -static void ext4_mark_recovery_complete(struct super_block * sb, - struct ext4_super_block * es); -static void ext4_clear_journal_err(struct super_block * sb, - struct ext4_super_block * es); +static void ext4_commit_super(struct super_block *sb, + struct ext4_super_block *es, int sync); +static void ext4_mark_recovery_complete(struct super_block *sb, + struct ext4_super_block *es); +static void ext4_clear_journal_err(struct super_block *sb, + struct ext4_super_block *es); static int ext4_sync_fs(struct super_block *sb, int wait); -static const char *ext4_decode_error(struct super_block * sb, int errno, +static const char *ext4_decode_error(struct super_block *sb, int errno, char nbuf[16]); -static int ext4_remount (struct super_block * sb, int * flags, char * data); -static int ext4_statfs (struct dentry * dentry, struct kstatfs * buf); +static int ext4_remount(struct super_block *sb, int *flags, char *data); +static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf); static void ext4_unlockfs(struct super_block *sb); -static void ext4_write_super (struct super_block * sb); +static void ext4_write_super(struct super_block *sb); static void ext4_write_super_lockfs(struct super_block *sb); @@ -211,15 +210,15 @@ static void ext4_handle_error(struct super_block *sb) if (sb->s_flags & MS_RDONLY) return; - if (!test_opt (sb, ERRORS_CONT)) { + if (!test_opt(sb, ERRORS_CONT)) { journal_t *journal = EXT4_SB(sb)->s_journal; EXT4_SB(sb)->s_mount_opt |= EXT4_MOUNT_ABORT; if (journal) jbd2_journal_abort(journal, -EIO); } - if (test_opt (sb, ERRORS_RO)) { - printk (KERN_CRIT "Remounting filesystem read-only\n"); + if (test_opt(sb, ERRORS_RO)) { + printk(KERN_CRIT "Remounting filesystem read-only\n"); sb->s_flags |= MS_RDONLY; } ext4_commit_super(sb, es, 1); @@ -228,13 +227,13 @@ static void ext4_handle_error(struct super_block *sb) sb->s_id); } -void ext4_error (struct super_block * sb, const char * function, - const char * fmt, ...) +void ext4_error(struct super_block *sb, const char *function, + const char *fmt, ...) { va_list args; va_start(args, fmt); - printk(KERN_CRIT "EXT4-fs error (device %s): %s: ",sb->s_id, function); + printk(KERN_CRIT "EXT4-fs error (device %s): %s: ", sb->s_id, function); vprintk(fmt, args); printk("\n"); va_end(args); @@ -242,7 +241,7 @@ void ext4_error (struct super_block * sb, const char * function, ext4_handle_error(sb); } -static const char *ext4_decode_error(struct super_block * sb, int errno, +static const char *ext4_decode_error(struct super_block *sb, int errno, char nbuf[16]) { char *errstr = NULL; @@ -278,8 +277,7 @@ static const char *ext4_decode_error(struct super_block * sb, int errno, /* __ext4_std_error decodes expected errors from journaling functions * automatically and invokes the appropriate error response. */ -void __ext4_std_error (struct super_block * sb, const char * function, - int errno) +void __ext4_std_error(struct super_block *sb, const char *function, int errno) { char nbuf[16]; const char *errstr; @@ -292,8 +290,8 @@ void __ext4_std_error (struct super_block * sb, const char * function, return; errstr = ext4_decode_error(sb, errno, nbuf); - printk (KERN_CRIT "EXT4-fs error (device %s) in %s: %s\n", - sb->s_id, function, errstr); + printk(KERN_CRIT "EXT4-fs error (device %s) in %s: %s\n", + sb->s_id, function, errstr); ext4_handle_error(sb); } @@ -308,15 +306,15 @@ void __ext4_std_error (struct super_block * sb, const char * function, * case we take the easy way out and panic immediately. */ -void ext4_abort (struct super_block * sb, const char * function, - const char * fmt, ...) +void ext4_abort(struct super_block *sb, const char *function, + const char *fmt, ...) { va_list args; - printk (KERN_CRIT "ext4_abort called.\n"); + printk(KERN_CRIT "ext4_abort called.\n"); va_start(args, fmt); - printk(KERN_CRIT "EXT4-fs error (device %s): %s: ",sb->s_id, function); + printk(KERN_CRIT "EXT4-fs error (device %s): %s: ", sb->s_id, function); vprintk(fmt, args); printk("\n"); va_end(args); @@ -334,8 +332,8 @@ void ext4_abort (struct super_block * sb, const char * function, jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO); } -void ext4_warning (struct super_block * sb, const char * function, - const char * fmt, ...) +void ext4_warning(struct super_block *sb, const char *function, + const char *fmt, ...) { va_list args; @@ -496,7 +494,7 @@ static void dump_orphan_list(struct super_block *sb, struct ext4_sb_info *sbi) } } -static void ext4_put_super (struct super_block * sb) +static void ext4_put_super(struct super_block *sb) { struct ext4_sb_info *sbi = EXT4_SB(sb); struct ext4_super_block *es = sbi->s_es; @@ -647,7 +645,8 @@ static void ext4_clear_inode(struct inode *inode) &EXT4_I(inode)->jinode); } -static inline void ext4_show_quota_options(struct seq_file *seq, struct super_block *sb) +static inline void ext4_show_quota_options(struct seq_file *seq, + struct super_block *sb) { #if defined(CONFIG_QUOTA) struct ext4_sb_info *sbi = EXT4_SB(sb); @@ -822,8 +821,8 @@ static struct dentry *ext4_fh_to_parent(struct super_block *sb, struct fid *fid, } #ifdef CONFIG_QUOTA -#define QTYPE2NAME(t) ((t)==USRQUOTA?"user":"group") -#define QTYPE2MOPT(on, t) ((t)==USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA)) +#define QTYPE2NAME(t) ((t) == USRQUOTA?"user":"group") +#define QTYPE2MOPT(on, t) ((t) == USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA)) static int ext4_dquot_initialize(struct inode *inode, int type); static int ext4_dquot_drop(struct inode *inode); @@ -991,12 +990,12 @@ static ext4_fsblk_t get_sb_block(void **data) return sb_block; } -static int parse_options (char *options, struct super_block *sb, - unsigned int *inum, unsigned long *journal_devnum, - ext4_fsblk_t *n_blocks_count, int is_remount) +static int parse_options(char *options, struct super_block *sb, + unsigned int *inum, unsigned long *journal_devnum, + ext4_fsblk_t *n_blocks_count, int is_remount) { struct ext4_sb_info *sbi = EXT4_SB(sb); - char * p; + char *p; substring_t args[MAX_OPT_ARGS]; int data_opt = 0; int option; @@ -1009,7 +1008,7 @@ static int parse_options (char *options, struct super_block *sb, if (!options) return 1; - while ((p = strsep (&options, ",")) != NULL) { + while ((p = strsep(&options, ",")) != NULL) { int token; if (!*p) continue; @@ -1017,16 +1016,16 @@ static int parse_options (char *options, struct super_block *sb, token = match_token(p, tokens, args); switch (token) { case Opt_bsd_df: - clear_opt (sbi->s_mount_opt, MINIX_DF); + clear_opt(sbi->s_mount_opt, MINIX_DF); break; case Opt_minix_df: - set_opt (sbi->s_mount_opt, MINIX_DF); + set_opt(sbi->s_mount_opt, MINIX_DF); break; case Opt_grpid: - set_opt (sbi->s_mount_opt, GRPID); + set_opt(sbi->s_mount_opt, GRPID); break; case Opt_nogrpid: - clear_opt (sbi->s_mount_opt, GRPID); + clear_opt(sbi->s_mount_opt, GRPID); break; case Opt_resuid: if (match_int(&args[0], &option)) @@ -1043,41 +1042,41 @@ static int parse_options (char *options, struct super_block *sb, /* *sb_block = match_int(&args[0]); */ break; case Opt_err_panic: - clear_opt (sbi->s_mount_opt, ERRORS_CONT); - clear_opt (sbi->s_mount_opt, ERRORS_RO); - set_opt (sbi->s_mount_opt, ERRORS_PANIC); + clear_opt(sbi->s_mount_opt, ERRORS_CONT); + clear_opt(sbi->s_mount_opt, ERRORS_RO); + set_opt(sbi->s_mount_opt, ERRORS_PANIC); break; case Opt_err_ro: - clear_opt (sbi->s_mount_opt, ERRORS_CONT); - clear_opt (sbi->s_mount_opt, ERRORS_PANIC); - set_opt (sbi->s_mount_opt, ERRORS_RO); + clear_opt(sbi->s_mount_opt, ERRORS_CONT); + clear_opt(sbi->s_mount_opt, ERRORS_PANIC); + set_opt(sbi->s_mount_opt, ERRORS_RO); break; case Opt_err_cont: - clear_opt (sbi->s_mount_opt, ERRORS_RO); - clear_opt (sbi->s_mount_opt, ERRORS_PANIC); - set_opt (sbi->s_mount_opt, ERRORS_CONT); + clear_opt(sbi->s_mount_opt, ERRORS_RO); + clear_opt(sbi->s_mount_opt, ERRORS_PANIC); + set_opt(sbi->s_mount_opt, ERRORS_CONT); break; case Opt_nouid32: - set_opt (sbi->s_mount_opt, NO_UID32); + set_opt(sbi->s_mount_opt, NO_UID32); break; case Opt_nocheck: - clear_opt (sbi->s_mount_opt, CHECK); + clear_opt(sbi->s_mount_opt, CHECK); break; case Opt_debug: - set_opt (sbi->s_mount_opt, DEBUG); + set_opt(sbi->s_mount_opt, DEBUG); break; case Opt_oldalloc: - set_opt (sbi->s_mount_opt, OLDALLOC); + set_opt(sbi->s_mount_opt, OLDALLOC); break; case Opt_orlov: - clear_opt (sbi->s_mount_opt, OLDALLOC); + clear_opt(sbi->s_mount_opt, OLDALLOC); break; #ifdef CONFIG_EXT4DEV_FS_XATTR case Opt_user_xattr: - set_opt (sbi->s_mount_opt, XATTR_USER); + set_opt(sbi->s_mount_opt, XATTR_USER); break; case Opt_nouser_xattr: - clear_opt (sbi->s_mount_opt, XATTR_USER); + clear_opt(sbi->s_mount_opt, XATTR_USER); break; #else case Opt_user_xattr: @@ -1115,7 +1114,7 @@ static int parse_options (char *options, struct super_block *sb, "journal on remount\n"); return 0; } - set_opt (sbi->s_mount_opt, UPDATE_JOURNAL); + set_opt(sbi->s_mount_opt, UPDATE_JOURNAL); break; case Opt_journal_inum: if (is_remount) { @@ -1145,7 +1144,7 @@ static int parse_options (char *options, struct super_block *sb, set_opt(sbi->s_mount_opt, JOURNAL_CHECKSUM); break; case Opt_noload: - set_opt (sbi->s_mount_opt, NOLOAD); + set_opt(sbi->s_mount_opt, NOLOAD); break; case Opt_commit: if (match_int(&args[0], &option)) @@ -1331,7 +1330,7 @@ set_qf_format: "on this filesystem, use tune2fs\n"); return 0; } - set_opt (sbi->s_mount_opt, EXTENTS); + set_opt(sbi->s_mount_opt, EXTENTS); break; case Opt_noextents: /* @@ -1348,7 +1347,7 @@ set_qf_format: "-o noextents options\n"); return 0; } - clear_opt (sbi->s_mount_opt, EXTENTS); + clear_opt(sbi->s_mount_opt, EXTENTS); break; case Opt_i_version: set_opt(sbi->s_mount_opt, I_VERSION); @@ -1374,9 +1373,9 @@ set_qf_format: set_opt(sbi->s_mount_opt, DELALLOC); break; default: - printk (KERN_ERR - "EXT4-fs: Unrecognized mount option \"%s\" " - "or missing value\n", p); + printk(KERN_ERR + "EXT4-fs: Unrecognized mount option \"%s\" " + "or missing value\n", p); return 0; } } @@ -1423,31 +1422,31 @@ static int ext4_setup_super(struct super_block *sb, struct ext4_super_block *es, int res = 0; if (le32_to_cpu(es->s_rev_level) > EXT4_MAX_SUPP_REV) { - printk (KERN_ERR "EXT4-fs warning: revision level too high, " - "forcing read-only mode\n"); + printk(KERN_ERR "EXT4-fs warning: revision level too high, " + "forcing read-only mode\n"); res = MS_RDONLY; } if (read_only) return res; if (!(sbi->s_mount_state & EXT4_VALID_FS)) - printk (KERN_WARNING "EXT4-fs warning: mounting unchecked fs, " - "running e2fsck is recommended\n"); + printk(KERN_WARNING "EXT4-fs warning: mounting unchecked fs, " + "running e2fsck is recommended\n"); else if ((sbi->s_mount_state & EXT4_ERROR_FS)) - printk (KERN_WARNING - "EXT4-fs warning: mounting fs with errors, " - "running e2fsck is recommended\n"); + printk(KERN_WARNING + "EXT4-fs warning: mounting fs with errors, " + "running e2fsck is recommended\n"); else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 && le16_to_cpu(es->s_mnt_count) >= (unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count)) - printk (KERN_WARNING - "EXT4-fs warning: maximal mount count reached, " - "running e2fsck is recommended\n"); + printk(KERN_WARNING + "EXT4-fs warning: maximal mount count reached, " + "running e2fsck is recommended\n"); else if (le32_to_cpu(es->s_checkinterval) && (le32_to_cpu(es->s_lastcheck) + le32_to_cpu(es->s_checkinterval) <= get_seconds())) - printk (KERN_WARNING - "EXT4-fs warning: checktime reached, " - "running e2fsck is recommended\n"); + printk(KERN_WARNING + "EXT4-fs warning: checktime reached, " + "running e2fsck is recommended\n"); #if 0 /* @@@ We _will_ want to clear the valid bit if we find * inconsistencies, to force a fsck at reboot. But for @@ -1596,16 +1595,14 @@ static int ext4_check_descriptors(struct super_block *sb) (EXT4_BLOCKS_PER_GROUP(sb) - 1); block_bitmap = ext4_block_bitmap(sb, gdp); - if (block_bitmap < first_block || block_bitmap > last_block) - { + if (block_bitmap < first_block || block_bitmap > last_block) { printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: " "Block bitmap for group %lu not in group " "(block %llu)!", i, block_bitmap); return 0; } inode_bitmap = ext4_inode_bitmap(sb, gdp); - if (inode_bitmap < first_block || inode_bitmap > last_block) - { + if (inode_bitmap < first_block || inode_bitmap > last_block) { printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: " "Inode bitmap for group %lu not in group " "(block %llu)!", i, inode_bitmap); @@ -1613,8 +1610,7 @@ static int ext4_check_descriptors(struct super_block *sb) } inode_table = ext4_inode_table(sb, gdp); if (inode_table < first_block || - inode_table + sbi->s_itb_per_group - 1 > last_block) - { + inode_table + sbi->s_itb_per_group - 1 > last_block) { printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: " "Inode table for group %lu not in group " "(block %llu)!", i, inode_table); @@ -1635,7 +1631,7 @@ static int ext4_check_descriptors(struct super_block *sb) } ext4_free_blocks_count_set(sbi->s_es, ext4_count_free_blocks(sb)); - sbi->s_es->s_free_inodes_count=cpu_to_le32(ext4_count_free_inodes(sb)); + sbi->s_es->s_free_inodes_count = cpu_to_le32(ext4_count_free_inodes(sb)); return 1; } @@ -1656,8 +1652,8 @@ static int ext4_check_descriptors(struct super_block *sb) * e2fsck was run on this filesystem, and it must have already done the orphan * inode cleanup for us, so we can safely abort without any further action. */ -static void ext4_orphan_cleanup (struct super_block * sb, - struct ext4_super_block * es) +static void ext4_orphan_cleanup(struct super_block *sb, + struct ext4_super_block *es) { unsigned int s_flags = sb->s_flags; int nr_orphans = 0, nr_truncates = 0; @@ -1734,7 +1730,7 @@ static void ext4_orphan_cleanup (struct super_block * sb, iput(inode); /* The delete magic happens here! */ } -#define PLURAL(x) (x), ((x)==1) ? "" : "s" +#define PLURAL(x) (x), ((x) == 1) ? "" : "s" if (nr_orphans) printk(KERN_INFO "EXT4-fs: %s: %d orphan inode%s deleted\n", @@ -1901,12 +1897,12 @@ static unsigned long ext4_get_stripe_size(struct ext4_sb_info *sbi) return 0; } -static int ext4_fill_super (struct super_block *sb, void *data, int silent) +static int ext4_fill_super(struct super_block *sb, void *data, int silent) __releases(kernel_lock) __acquires(kernel_lock) { - struct buffer_head * bh; + struct buffer_head *bh; struct ext4_super_block *es = NULL; struct ext4_sb_info *sbi; ext4_fsblk_t block; @@ -1955,7 +1951,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) } if (!(bh = sb_bread(sb, logical_sb_block))) { - printk (KERN_ERR "EXT4-fs: unable to read superblock\n"); + printk(KERN_ERR "EXT4-fs: unable to read superblock\n"); goto out_fail; } /* @@ -2028,8 +2024,8 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) set_opt(sbi->s_mount_opt, DELALLOC); - if (!parse_options ((char *) data, sb, &journal_inum, &journal_devnum, - NULL, 0)) + if (!parse_options((char *) data, sb, &journal_inum, &journal_devnum, + NULL, 0)) goto failed_mount; sb->s_flags = (sb->s_flags & ~MS_POSIXACL) | @@ -2104,7 +2100,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) goto failed_mount; } - brelse (bh); + brelse(bh); logical_sb_block = sb_block * EXT4_MIN_BLOCK_SIZE; offset = do_div(logical_sb_block, blocksize); bh = sb_bread(sb, logical_sb_block); @@ -2116,8 +2112,8 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) es = (struct ext4_super_block *)(((char *)bh->b_data) + offset); sbi->s_es = es; if (es->s_magic != cpu_to_le16(EXT4_SUPER_MAGIC)) { - printk (KERN_ERR - "EXT4-fs: Magic mismatch, very weird !\n"); + printk(KERN_ERR + "EXT4-fs: Magic mismatch, very weird !\n"); goto failed_mount; } } @@ -2134,9 +2130,9 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) if ((sbi->s_inode_size < EXT4_GOOD_OLD_INODE_SIZE) || (!is_power_of_2(sbi->s_inode_size)) || (sbi->s_inode_size > blocksize)) { - printk (KERN_ERR - "EXT4-fs: unsupported inode size: %d\n", - sbi->s_inode_size); + printk(KERN_ERR + "EXT4-fs: unsupported inode size: %d\n", + sbi->s_inode_size); goto failed_mount; } if (sbi->s_inode_size > EXT4_GOOD_OLD_INODE_SIZE) @@ -2168,20 +2164,20 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) sbi->s_mount_state = le16_to_cpu(es->s_state); sbi->s_addr_per_block_bits = ilog2(EXT4_ADDR_PER_BLOCK(sb)); sbi->s_desc_per_block_bits = ilog2(EXT4_DESC_PER_BLOCK(sb)); - for (i=0; i < 4; i++) + for (i = 0; i < 4; i++) sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]); sbi->s_def_hash_version = es->s_def_hash_version; if (sbi->s_blocks_per_group > blocksize * 8) { - printk (KERN_ERR - "EXT4-fs: #blocks per group too big: %lu\n", - sbi->s_blocks_per_group); + printk(KERN_ERR + "EXT4-fs: #blocks per group too big: %lu\n", + sbi->s_blocks_per_group); goto failed_mount; } if (sbi->s_inodes_per_group > blocksize * 8) { - printk (KERN_ERR - "EXT4-fs: #inodes per group too big: %lu\n", - sbi->s_inodes_per_group); + printk(KERN_ERR + "EXT4-fs: #inodes per group too big: %lu\n", + sbi->s_inodes_per_group); goto failed_mount; } @@ -2215,10 +2211,10 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) sbi->s_groups_count = blocks_count; db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) / EXT4_DESC_PER_BLOCK(sb); - sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *), + sbi->s_group_desc = kmalloc(db_count * sizeof(struct buffer_head *), GFP_KERNEL); if (sbi->s_group_desc == NULL) { - printk (KERN_ERR "EXT4-fs: not enough memory\n"); + printk(KERN_ERR "EXT4-fs: not enough memory\n"); goto failed_mount; } @@ -2228,13 +2224,13 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) block = descriptor_loc(sb, logical_sb_block, i); sbi->s_group_desc[i] = sb_bread(sb, block); if (!sbi->s_group_desc[i]) { - printk (KERN_ERR "EXT4-fs: " - "can't read group descriptor %d\n", i); + printk(KERN_ERR "EXT4-fs: " + "can't read group descriptor %d\n", i); db_count = i; goto failed_mount2; } } - if (!ext4_check_descriptors (sb)) { + if (!ext4_check_descriptors(sb)) { printk(KERN_ERR "EXT4-fs: group descriptors corrupted!\n"); goto failed_mount2; } @@ -2310,11 +2306,11 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) EXT4_SB(sb)->s_journal->j_failed_commit) { printk(KERN_CRIT "EXT4-fs error (device %s): " "ext4_fill_super: Journal transaction " - "%u is corrupt\n", sb->s_id, + "%u is corrupt\n", sb->s_id, EXT4_SB(sb)->s_journal->j_failed_commit); - if (test_opt (sb, ERRORS_RO)) { - printk (KERN_CRIT - "Mounting filesystem read-only\n"); + if (test_opt(sb, ERRORS_RO)) { + printk(KERN_CRIT + "Mounting filesystem read-only\n"); sb->s_flags |= MS_RDONLY; EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS; es->s_state |= cpu_to_le16(EXT4_ERROR_FS); @@ -2334,9 +2330,9 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) goto failed_mount3; } else { if (!silent) - printk (KERN_ERR - "ext4: No journal on filesystem on %s\n", - sb->s_id); + printk(KERN_ERR + "ext4: No journal on filesystem on %s\n", + sb->s_id); goto failed_mount3; } @@ -2420,7 +2416,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) goto failed_mount4; } - ext4_setup_super (sb, es, sb->s_flags & MS_RDONLY); + ext4_setup_super(sb, es, sb->s_flags & MS_RDONLY); /* determine the minimum size of new large inodes, if present */ if (sbi->s_inode_size > EXT4_GOOD_OLD_INODE_SIZE) { @@ -2459,12 +2455,12 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) ext4_orphan_cleanup(sb, es); EXT4_SB(sb)->s_mount_state &= ~EXT4_ORPHAN_FS; if (needs_recovery) - printk (KERN_INFO "EXT4-fs: recovery complete.\n"); + printk(KERN_INFO "EXT4-fs: recovery complete.\n"); ext4_mark_recovery_complete(sb, es); - printk (KERN_INFO "EXT4-fs: mounted filesystem with %s data mode.\n", - test_opt(sb,DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA ? "journal": - test_opt(sb,DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA ? "ordered": - "writeback"); + printk(KERN_INFO "EXT4-fs: mounted filesystem with %s data mode.\n", + test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA ? "journal": + test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA ? "ordered": + "writeback"); if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) { printk(KERN_WARNING "EXT4-fs: Ignoring delalloc option - " @@ -2577,14 +2573,14 @@ static journal_t *ext4_get_journal(struct super_block *sb, static journal_t *ext4_get_dev_journal(struct super_block *sb, dev_t j_dev) { - struct buffer_head * bh; + struct buffer_head *bh; journal_t *journal; ext4_fsblk_t start; ext4_fsblk_t len; int hblock, blocksize; ext4_fsblk_t sb_block; unsigned long offset; - struct ext4_super_block * es; + struct ext4_super_block *es; struct block_device *bdev; bdev = ext4_blkdev_get(j_dev); @@ -2699,8 +2695,8 @@ static int ext4_load_journal(struct super_block *sb, "unavailable, cannot proceed.\n"); return -EROFS; } - printk (KERN_INFO "EXT4-fs: write access will " - "be enabled during recovery.\n"); + printk(KERN_INFO "EXT4-fs: write access will " + "be enabled during recovery.\n"); } } @@ -2753,8 +2749,8 @@ static int ext4_load_journal(struct super_block *sb, return 0; } -static int ext4_create_journal(struct super_block * sb, - struct ext4_super_block * es, +static int ext4_create_journal(struct super_block *sb, + struct ext4_super_block *es, unsigned int journal_inum) { journal_t *journal; @@ -2795,9 +2791,8 @@ static int ext4_create_journal(struct super_block * sb, return 0; } -static void ext4_commit_super (struct super_block * sb, - struct ext4_super_block * es, - int sync) +static void ext4_commit_super(struct super_block *sb, + struct ext4_super_block *es, int sync) { struct buffer_head *sbh = EXT4_SB(sb)->s_sbh; @@ -2818,8 +2813,8 @@ static void ext4_commit_super (struct super_block * sb, * remounting) the filesystem readonly, then we will end up with a * consistent fs on disk. Record that fact. */ -static void ext4_mark_recovery_complete(struct super_block * sb, - struct ext4_super_block * es) +static void ext4_mark_recovery_complete(struct super_block *sb, + struct ext4_super_block *es) { journal_t *journal = EXT4_SB(sb)->s_journal; @@ -2841,8 +2836,8 @@ static void ext4_mark_recovery_complete(struct super_block * sb, * has recorded an error from a previous lifetime, move that error to the * main filesystem now. */ -static void ext4_clear_journal_err(struct super_block * sb, - struct ext4_super_block * es) +static void ext4_clear_journal_err(struct super_block *sb, + struct ext4_super_block *es) { journal_t *journal; int j_errno; @@ -2867,7 +2862,7 @@ static void ext4_clear_journal_err(struct super_block * sb, EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS; es->s_state |= cpu_to_le16(EXT4_ERROR_FS); - ext4_commit_super (sb, es, 1); + ext4_commit_super(sb, es, 1); jbd2_journal_clear_err(journal); } @@ -2900,7 +2895,7 @@ int ext4_force_commit(struct super_block *sb) * This implicitly triggers the writebehind on sync(). */ -static void ext4_write_super (struct super_block * sb) +static void ext4_write_super(struct super_block *sb) { if (mutex_trylock(&sb->s_lock) != 0) BUG(); @@ -2956,9 +2951,9 @@ static void ext4_unlockfs(struct super_block *sb) } } -static int ext4_remount (struct super_block * sb, int * flags, char * data) +static int ext4_remount(struct super_block *sb, int *flags, char *data) { - struct ext4_super_block * es; + struct ext4_super_block *es; struct ext4_sb_info *sbi = EXT4_SB(sb); ext4_fsblk_t n_blocks_count = 0; unsigned long old_sb_flags; @@ -3086,7 +3081,7 @@ static int ext4_remount (struct super_block * sb, int * flags, char * data) sbi->s_mount_state = le16_to_cpu(es->s_state); if ((err = ext4_group_extend(sb, es, n_blocks_count))) goto restore_opts; - if (!ext4_setup_super (sb, es, 0)) + if (!ext4_setup_super(sb, es, 0)) sb->s_flags &= ~MS_RDONLY; } } @@ -3116,7 +3111,7 @@ restore_opts: return err; } -static int ext4_statfs (struct dentry * dentry, struct kstatfs * buf) +static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf) { struct super_block *sb = dentry->d_sb; struct ext4_sb_info *sbi = EXT4_SB(sb); @@ -3354,12 +3349,12 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id, } /* Journaling quota? */ if (EXT4_SB(sb)->s_qf_names[type]) { - /* Quotafile not of fs root? */ + /* Quotafile not in fs root? */ if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode) printk(KERN_WARNING "EXT4-fs: Quota file not on filesystem root. " "Journaled quota will not work.\n"); - } + } /* * When we journal data on quota file, we have to flush journal to see diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 93c5fdcdad2e..8954208b4893 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1512,7 +1512,7 @@ static inline void ext4_xattr_hash_entry(struct ext4_xattr_header *header, char *name = entry->e_name; int n; - for (n=0; n < entry->e_name_len; n++) { + for (n = 0; n < entry->e_name_len; n++) { hash = (hash << NAME_HASH_SHIFT) ^ (hash >> (8*sizeof(hash) - NAME_HASH_SHIFT)) ^ *name++; -- cgit v1.2.3 From 00b32b7fb671e797bdd2736524a497f18a8df7bf Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 26 Jul 2008 17:33:53 -0400 Subject: ext4: unexport jbd2_journal_update_superblock Remove the unused EXPORT_SYMBOL(jbd2_journal_update_superblock). Signed-off-by: Adrian Bunk Signed-off-by: "Theodore Ts'o" --- fs/jbd2/journal.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index b26c6d9fe6ae..8207a01c4edb 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -68,7 +68,6 @@ EXPORT_SYMBOL(jbd2_journal_set_features); EXPORT_SYMBOL(jbd2_journal_create); EXPORT_SYMBOL(jbd2_journal_load); EXPORT_SYMBOL(jbd2_journal_destroy); -EXPORT_SYMBOL(jbd2_journal_update_superblock); EXPORT_SYMBOL(jbd2_journal_abort); EXPORT_SYMBOL(jbd2_journal_errno); EXPORT_SYMBOL(jbd2_journal_ack_err); -- cgit v1.2.3 From f9f6dce01905179d9a209cc1e69fe9047736c112 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Thu, 17 Apr 2008 16:49:43 +1000 Subject: [XFS] Split xfs_dir2_leafn_lookup_int into its two pieces of functionality SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30834a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_dir2_node.c | 358 ++++++++++++++++++++++++++++--------------------- 1 file changed, 202 insertions(+), 156 deletions(-) diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c index 8dade711f099..e29b7c63e198 100644 --- a/fs/xfs/xfs_dir2_node.c +++ b/fs/xfs/xfs_dir2_node.c @@ -387,28 +387,26 @@ xfs_dir2_leafn_lasthash( } /* - * Look up a leaf entry in a node-format leaf block. - * If this is an addname then the extrablk in state is a freespace block, - * otherwise it's a data block. + * Look up a leaf entry for space to add a name in a node-format leaf block. + * The extrablk in state is a freespace block. */ -int -xfs_dir2_leafn_lookup_int( +STATIC int +xfs_dir2_leafn_lookup_for_addname( xfs_dabuf_t *bp, /* leaf buffer */ xfs_da_args_t *args, /* operation arguments */ int *indexp, /* out: leaf entry index */ xfs_da_state_t *state) /* state to fill in */ { - xfs_dabuf_t *curbp; /* current data/free buffer */ - xfs_dir2_db_t curdb; /* current data block number */ - xfs_dir2_db_t curfdb; /* current free block number */ - xfs_dir2_data_entry_t *dep; /* data block entry */ + xfs_dabuf_t *curbp = NULL; /* current data/free buffer */ + xfs_dir2_db_t curdb = -1; /* current data block number */ + xfs_dir2_db_t curfdb = -1; /* current free block number */ xfs_inode_t *dp; /* incore directory inode */ int error; /* error return value */ int fi; /* free entry index */ - xfs_dir2_free_t *free=NULL; /* free block structure */ + xfs_dir2_free_t *free = NULL; /* free block structure */ int index; /* leaf entry index */ xfs_dir2_leaf_t *leaf; /* leaf structure */ - int length=0; /* length of new data entry */ + int length; /* length of new data entry */ xfs_dir2_leaf_entry_t *lep; /* leaf entry */ xfs_mount_t *mp; /* filesystem mount point */ xfs_dir2_db_t newdb; /* new data block number */ @@ -431,33 +429,20 @@ xfs_dir2_leafn_lookup_int( /* * Do we have a buffer coming in? */ - if (state->extravalid) + if (state->extravalid) { + /* If so, it's a free block buffer, get the block number. */ curbp = state->extrablk.bp; - else - curbp = NULL; - /* - * For addname, it's a free block buffer, get the block number. - */ - if (args->addname) { - curfdb = curbp ? state->extrablk.blkno : -1; - curdb = -1; - length = xfs_dir2_data_entsize(args->namelen); - if ((free = (curbp ? curbp->data : NULL))) - ASSERT(be32_to_cpu(free->hdr.magic) == XFS_DIR2_FREE_MAGIC); - } - /* - * For others, it's a data block buffer, get the block number. - */ - else { - curfdb = -1; - curdb = curbp ? state->extrablk.blkno : -1; + curfdb = state->extrablk.blkno; + free = curbp->data; + ASSERT(be32_to_cpu(free->hdr.magic) == XFS_DIR2_FREE_MAGIC); } + length = xfs_dir2_data_entsize(args->namelen); /* * Loop over leaf entries with the right hash value. */ - for (lep = &leaf->ents[index]; - index < be16_to_cpu(leaf->hdr.count) && be32_to_cpu(lep->hashval) == args->hashval; - lep++, index++) { + for (lep = &leaf->ents[index]; index < be16_to_cpu(leaf->hdr.count) && + be32_to_cpu(lep->hashval) == args->hashval; + lep++, index++) { /* * Skip stale leaf entries. */ @@ -471,158 +456,218 @@ xfs_dir2_leafn_lookup_int( * For addname, we're looking for a place to put the new entry. * We want to use a data block with an entry of equal * hash value to ours if there is one with room. + * + * If this block isn't the data block we already have + * in hand, take a look at it. */ - if (args->addname) { + if (newdb != curdb) { + curdb = newdb; /* - * If this block isn't the data block we already have - * in hand, take a look at it. + * Convert the data block to the free block + * holding its freespace information. */ - if (newdb != curdb) { - curdb = newdb; - /* - * Convert the data block to the free block - * holding its freespace information. - */ - newfdb = xfs_dir2_db_to_fdb(mp, newdb); - /* - * If it's not the one we have in hand, - * read it in. - */ - if (newfdb != curfdb) { - /* - * If we had one before, drop it. - */ - if (curbp) - xfs_da_brelse(tp, curbp); - /* - * Read the free block. - */ - if ((error = xfs_da_read_buf(tp, dp, - xfs_dir2_db_to_da(mp, - newfdb), - -1, &curbp, - XFS_DATA_FORK))) { - return error; - } - free = curbp->data; - ASSERT(be32_to_cpu(free->hdr.magic) == - XFS_DIR2_FREE_MAGIC); - ASSERT((be32_to_cpu(free->hdr.firstdb) % - XFS_DIR2_MAX_FREE_BESTS(mp)) == - 0); - ASSERT(be32_to_cpu(free->hdr.firstdb) <= curdb); - ASSERT(curdb < - be32_to_cpu(free->hdr.firstdb) + - be32_to_cpu(free->hdr.nvalid)); - } - /* - * Get the index for our entry. - */ - fi = xfs_dir2_db_to_fdindex(mp, curdb); - /* - * If it has room, return it. - */ - if (unlikely(be16_to_cpu(free->bests[fi]) == NULLDATAOFF)) { - XFS_ERROR_REPORT("xfs_dir2_leafn_lookup_int", - XFS_ERRLEVEL_LOW, mp); - if (curfdb != newfdb) - xfs_da_brelse(tp, curbp); - return XFS_ERROR(EFSCORRUPTED); - } - curfdb = newfdb; - if (be16_to_cpu(free->bests[fi]) >= length) { - *indexp = index; - state->extravalid = 1; - state->extrablk.bp = curbp; - state->extrablk.blkno = curfdb; - state->extrablk.index = fi; - state->extrablk.magic = - XFS_DIR2_FREE_MAGIC; - ASSERT(args->oknoent); - return XFS_ERROR(ENOENT); - } - } - } - /* - * Not adding a new entry, so we really want to find - * the name given to us. - */ - else { + newfdb = xfs_dir2_db_to_fdb(mp, newdb); /* - * If it's a different data block, go get it. + * If it's not the one we have in hand, read it in. */ - if (newdb != curdb) { + if (newfdb != curfdb) { /* - * If we had a block before, drop it. + * If we had one before, drop it. */ if (curbp) xfs_da_brelse(tp, curbp); /* - * Read the data block. + * Read the free block. */ - if ((error = - xfs_da_read_buf(tp, dp, - xfs_dir2_db_to_da(mp, newdb), -1, - &curbp, XFS_DATA_FORK))) { + error = xfs_da_read_buf(tp, dp, + xfs_dir2_db_to_da(mp, newfdb), + -1, &curbp, XFS_DATA_FORK); + if (error) return error; - } - xfs_dir2_data_check(dp, curbp); - curdb = newdb; + free = curbp->data; + ASSERT(be32_to_cpu(free->hdr.magic) == + XFS_DIR2_FREE_MAGIC); + ASSERT((be32_to_cpu(free->hdr.firstdb) % + XFS_DIR2_MAX_FREE_BESTS(mp)) == 0); + ASSERT(be32_to_cpu(free->hdr.firstdb) <= curdb); + ASSERT(curdb < be32_to_cpu(free->hdr.firstdb) + + be32_to_cpu(free->hdr.nvalid)); } /* - * Point to the data entry. + * Get the index for our entry. */ - dep = (xfs_dir2_data_entry_t *) - ((char *)curbp->data + - xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address))); + fi = xfs_dir2_db_to_fdindex(mp, curdb); /* - * Compare the entry, return it if it matches. + * If it has room, return it. */ - if (dep->namelen == args->namelen && - dep->name[0] == args->name[0] && - memcmp(dep->name, args->name, args->namelen) == 0) { - args->inumber = be64_to_cpu(dep->inumber); - *indexp = index; - state->extravalid = 1; - state->extrablk.bp = curbp; - state->extrablk.blkno = curdb; - state->extrablk.index = - (int)((char *)dep - - (char *)curbp->data); - state->extrablk.magic = XFS_DIR2_DATA_MAGIC; - return XFS_ERROR(EEXIST); + if (unlikely(be16_to_cpu(free->bests[fi]) == NULLDATAOFF)) { + XFS_ERROR_REPORT("xfs_dir2_leafn_lookup_int", + XFS_ERRLEVEL_LOW, mp); + if (curfdb != newfdb) + xfs_da_brelse(tp, curbp); + return XFS_ERROR(EFSCORRUPTED); } + curfdb = newfdb; + if (be16_to_cpu(free->bests[fi]) >= length) + goto out; } } + /* Didn't find any space */ + fi = -1; +out: + ASSERT(args->oknoent); + if (curbp) { + /* Giving back a free block. */ + state->extravalid = 1; + state->extrablk.bp = curbp; + state->extrablk.index = fi; + state->extrablk.blkno = curfdb; + state->extrablk.magic = XFS_DIR2_FREE_MAGIC; + } else { + state->extravalid = 0; + } /* - * Didn't find a match. - * If we are holding a buffer, give it back in case our caller - * finds it useful. + * Return the index, that will be the insertion point. */ - if ((state->extravalid = (curbp != NULL))) { - state->extrablk.bp = curbp; - state->extrablk.index = -1; + *indexp = index; + return XFS_ERROR(ENOENT); +} + +/* + * Look up a leaf entry in a node-format leaf block. + * The extrablk in state a data block. + */ +STATIC int +xfs_dir2_leafn_lookup_for_entry( + xfs_dabuf_t *bp, /* leaf buffer */ + xfs_da_args_t *args, /* operation arguments */ + int *indexp, /* out: leaf entry index */ + xfs_da_state_t *state) /* state to fill in */ +{ + xfs_dabuf_t *curbp = NULL; /* current data/free buffer */ + xfs_dir2_db_t curdb = -1; /* current data block number */ + xfs_dir2_data_entry_t *dep; /* data block entry */ + xfs_inode_t *dp; /* incore directory inode */ + int error; /* error return value */ + int di; /* data entry index */ + int index; /* leaf entry index */ + xfs_dir2_leaf_t *leaf; /* leaf structure */ + xfs_dir2_leaf_entry_t *lep; /* leaf entry */ + xfs_mount_t *mp; /* filesystem mount point */ + xfs_dir2_db_t newdb; /* new data block number */ + xfs_trans_t *tp; /* transaction pointer */ + + dp = args->dp; + tp = args->trans; + mp = dp->i_mount; + leaf = bp->data; + ASSERT(be16_to_cpu(leaf->hdr.info.magic) == XFS_DIR2_LEAFN_MAGIC); +#ifdef __KERNEL__ + ASSERT(be16_to_cpu(leaf->hdr.count) > 0); +#endif + xfs_dir2_leafn_check(dp, bp); + /* + * Look up the hash value in the leaf entries. + */ + index = xfs_dir2_leaf_search_hash(args, bp); + /* + * Do we have a buffer coming in? + */ + if (state->extravalid) { + curbp = state->extrablk.bp; + curdb = state->extrablk.blkno; + } + /* + * Loop over leaf entries with the right hash value. + */ + for (lep = &leaf->ents[index]; index < be16_to_cpu(leaf->hdr.count) && + be32_to_cpu(lep->hashval) == args->hashval; + lep++, index++) { + /* + * Skip stale leaf entries. + */ + if (be32_to_cpu(lep->address) == XFS_DIR2_NULL_DATAPTR) + continue; + /* + * Pull the data block number from the entry. + */ + newdb = xfs_dir2_dataptr_to_db(mp, be32_to_cpu(lep->address)); /* - * For addname, giving back a free block. + * Not adding a new entry, so we really want to find + * the name given to us. + * + * If it's a different data block, go get it. */ - if (args->addname) { - state->extrablk.blkno = curfdb; - state->extrablk.magic = XFS_DIR2_FREE_MAGIC; + if (newdb != curdb) { + /* + * If we had a block before, drop it. + */ + if (curbp) + xfs_da_brelse(tp, curbp); + /* + * Read the data block. + */ + error = xfs_da_read_buf(tp, dp, xfs_dir2_db_to_da(mp, + newdb), -1, &curbp, XFS_DATA_FORK); + if (error) + return error; + xfs_dir2_data_check(dp, curbp); + curdb = newdb; } /* - * For other callers, giving back a data block. + * Point to the data entry. */ - else { - state->extrablk.blkno = curdb; - state->extrablk.magic = XFS_DIR2_DATA_MAGIC; + dep = (xfs_dir2_data_entry_t *)((char *)curbp->data + + xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address))); + /* + * Compare the entry, return it if it matches. + */ + if (dep->namelen == args->namelen && memcmp(dep->name, + args->name, args->namelen) == 0) { + args->inumber = be64_to_cpu(dep->inumber); + di = (int)((char *)dep - (char *)curbp->data); + error = EEXIST; + goto out; } } + /* Didn't find a match. */ + error = ENOENT; + di = -1; + ASSERT(index == be16_to_cpu(leaf->hdr.count) || args->oknoent); +out: + if (curbp) { + /* Giving back a data block. */ + state->extravalid = 1; + state->extrablk.bp = curbp; + state->extrablk.index = di; + state->extrablk.blkno = curdb; + state->extrablk.magic = XFS_DIR2_DATA_MAGIC; + } else { + state->extravalid = 0; + } /* - * Return the final index, that will be the insertion point. + * Return the index, that will be the insertion point. */ *indexp = index; - ASSERT(index == be16_to_cpu(leaf->hdr.count) || args->oknoent); - return XFS_ERROR(ENOENT); + return XFS_ERROR(error); +} + +/* + * Look up a leaf entry in a node-format leaf block. + * If this is an addname then the extrablk in state is a freespace block, + * otherwise it's a data block. + */ +int +xfs_dir2_leafn_lookup_int( + xfs_dabuf_t *bp, /* leaf buffer */ + xfs_da_args_t *args, /* operation arguments */ + int *indexp, /* out: leaf entry index */ + xfs_da_state_t *state) /* state to fill in */ +{ + if (args->addname) + return xfs_dir2_leafn_lookup_for_addname(bp, args, indexp, + state); + return xfs_dir2_leafn_lookup_for_entry(bp, args, indexp, state); } /* @@ -823,9 +868,10 @@ xfs_dir2_leafn_rebalance( */ if (!state->inleaf) blk2->index = blk1->index - be16_to_cpu(leaf1->hdr.count); - - /* - * Finally sanity check just to make sure we are not returning a negative index + + /* + * Finally sanity check just to make sure we are not returning a + * negative index */ if(blk2->index < 0) { state->inleaf = 1; -- cgit v1.2.3 From 7c12f296500e1157872ef45b3f3bb06b4b73f1c1 Mon Sep 17 00:00:00 2001 From: Tim Shimmin Date: Wed, 30 Apr 2008 18:15:28 +1000 Subject: [XFS] Fix up noattr2 so that it will properly update the versionnum and features2 fields. Previously, mounting with noattr2 failed to achieve anything because although it cleared the attr2 mount flag, it would set it again as soon as it processed the superblock fields. The fix now has an explicit noattr2 flag and uses it later to fix up the versionnum and features2 fields. SGI-PV: 980021 SGI-Modid: xfs-linux-melb:xfs-kern:31003a Signed-off-by: Tim Shimmin Signed-off-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 1 + fs/xfs/xfs_clnt.h | 1 + fs/xfs/xfs_mount.c | 12 +++++++++++- fs/xfs/xfs_mount.h | 1 + fs/xfs/xfs_sb.h | 7 +++++++ fs/xfs/xfs_vfsops.c | 9 ++++++++- 6 files changed, 29 insertions(+), 2 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 943381284e2e..1b60e46f527f 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -314,6 +314,7 @@ xfs_parseargs( args->flags |= XFSMNT_ATTR2; } else if (!strcmp(this_char, MNTOPT_NOATTR2)) { args->flags &= ~XFSMNT_ATTR2; + args->flags |= XFSMNT_NOATTR2; } else if (!strcmp(this_char, MNTOPT_FILESTREAM)) { args->flags2 |= XFSMNT2_FILESTREAMS; } else if (!strcmp(this_char, MNTOPT_NOQUOTA)) { diff --git a/fs/xfs/xfs_clnt.h b/fs/xfs/xfs_clnt.h index d5d1e60ee224..d2ce5dd70d87 100644 --- a/fs/xfs/xfs_clnt.h +++ b/fs/xfs/xfs_clnt.h @@ -78,6 +78,7 @@ struct xfs_mount_args { #define XFSMNT_IOSIZE 0x00002000 /* optimize for I/O size */ #define XFSMNT_OSYNCISOSYNC 0x00004000 /* o_sync is REALLY o_sync */ /* (osyncisdsync is default) */ +#define XFSMNT_NOATTR2 0x00008000 /* turn off ATTR2 EA format */ #define XFSMNT_32BITINODES 0x00200000 /* restrict inodes to 32 * bits of address space */ #define XFSMNT_GQUOTA 0x00400000 /* group quota accounting */ diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index da3988453b71..361c7a755a07 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -994,9 +994,19 @@ xfs_mountfs( * Re-check for ATTR2 in case it was found in bad_features2 * slot. */ - if (xfs_sb_version_hasattr2(&mp->m_sb)) + if (xfs_sb_version_hasattr2(&mp->m_sb) && + !(mp->m_flags & XFS_MOUNT_NOATTR2)) mp->m_flags |= XFS_MOUNT_ATTR2; + } + + if (xfs_sb_version_hasattr2(&mp->m_sb) && + (mp->m_flags & XFS_MOUNT_NOATTR2)) { + xfs_sb_version_removeattr2(&mp->m_sb); + update_flags |= XFS_SB_FEATURES2; + /* update sb_versionnum for the clearing of the morebits */ + if (!sbp->sb_features2) + update_flags |= XFS_SB_VERSIONNUM; } /* diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index 63e0693a358a..4aff0c125ad3 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -378,6 +378,7 @@ typedef struct xfs_mount { counters */ #define XFS_MOUNT_FILESTREAMS (1ULL << 24) /* enable the filestreams allocator */ +#define XFS_MOUNT_NOATTR2 (1ULL << 25) /* disable use of attr2 format */ /* diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h index d904efe7f871..e3204a36a222 100644 --- a/fs/xfs/xfs_sb.h +++ b/fs/xfs/xfs_sb.h @@ -473,6 +473,13 @@ static inline void xfs_sb_version_addattr2(xfs_sb_t *sbp) ((sbp)->sb_features2 | XFS_SB_VERSION2_ATTR2BIT))); } +static inline void xfs_sb_version_removeattr2(xfs_sb_t *sbp) +{ + sbp->sb_features2 &= ~XFS_SB_VERSION2_ATTR2BIT; + if (!sbp->sb_features2) + sbp->sb_versionnum &= ~XFS_SB_VERSION_MOREBITSBIT; +} + /* * end of superblock version macros */ diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c index 30bacd8bb0e5..bbc911720d81 100644 --- a/fs/xfs/xfs_vfsops.c +++ b/fs/xfs/xfs_vfsops.c @@ -284,6 +284,8 @@ xfs_start_flags( mp->m_flags |= XFS_MOUNT_DIRSYNC; if (ap->flags & XFSMNT_ATTR2) mp->m_flags |= XFS_MOUNT_ATTR2; + if (ap->flags & XFSMNT_NOATTR2) + mp->m_flags |= XFS_MOUNT_NOATTR2; if (ap->flags2 & XFSMNT2_COMPAT_IOSIZE) mp->m_flags |= XFS_MOUNT_COMPAT_IOSIZE; @@ -346,7 +348,12 @@ xfs_finish_flags( } } - if (xfs_sb_version_hasattr2(&mp->m_sb)) + /* + * mkfs'ed attr2 will turn on attr2 mount unless explicitly + * told by noattr2 to turn it off + */ + if (xfs_sb_version_hasattr2(&mp->m_sb) && + !(ap->flags & XFSMNT_NOATTR2)) mp->m_flags |= XFS_MOUNT_ATTR2; /* -- cgit v1.2.3 From f0e2d93c29dc39ffd24cac180a19d48f700c0706 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Mon, 19 May 2008 16:31:57 +1000 Subject: [XFS] Remove unused arg from kmem_free() kmem_free() function takes (ptr, size) arguments but doesn't actually use second one. This patch removes size argument from all callsites. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31050a Signed-off-by: Denys Vlasenko Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/kmem.c | 4 ++-- fs/xfs/linux-2.6/kmem.h | 2 +- fs/xfs/linux-2.6/xfs_buf.c | 9 ++++----- fs/xfs/linux-2.6/xfs_super.c | 8 ++++---- fs/xfs/quota/xfs_dquot_item.c | 4 ++-- fs/xfs/quota/xfs_qm.c | 12 ++++++------ fs/xfs/quota/xfs_qm_syscalls.c | 8 ++++---- fs/xfs/support/ktrace.c | 4 ++-- fs/xfs/xfs_attr_leaf.c | 18 +++++++++--------- fs/xfs/xfs_bmap.c | 2 +- fs/xfs/xfs_buf_item.c | 8 ++++---- fs/xfs/xfs_da_btree.c | 22 +++++++++++----------- fs/xfs/xfs_dfrag.c | 4 ++-- fs/xfs/xfs_dir2.c | 6 +++--- fs/xfs/xfs_dir2_block.c | 6 +++--- fs/xfs/xfs_dir2_leaf.c | 2 +- fs/xfs/xfs_dir2_sf.c | 8 ++++---- fs/xfs/xfs_error.c | 5 ++--- fs/xfs/xfs_extfree_item.c | 6 ++---- fs/xfs/xfs_inode.c | 34 ++++++++++++++++------------------ fs/xfs/xfs_inode_item.c | 7 +++---- fs/xfs/xfs_itable.c | 6 +++--- fs/xfs/xfs_log.c | 4 ++-- fs/xfs/xfs_log_recover.c | 21 ++++++++------------- fs/xfs/xfs_mount.c | 18 +++++++----------- fs/xfs/xfs_mru_cache.c | 8 ++++---- fs/xfs/xfs_rtalloc.c | 2 +- fs/xfs/xfs_trans.c | 4 ++-- fs/xfs/xfs_trans_inode.c | 2 +- fs/xfs/xfs_trans_item.c | 8 ++++---- fs/xfs/xfs_vfsops.c | 8 ++++---- 31 files changed, 122 insertions(+), 138 deletions(-) diff --git a/fs/xfs/linux-2.6/kmem.c b/fs/xfs/linux-2.6/kmem.c index 9b1bb17a0501..69233a52f0a6 100644 --- a/fs/xfs/linux-2.6/kmem.c +++ b/fs/xfs/linux-2.6/kmem.c @@ -90,7 +90,7 @@ kmem_zalloc_greedy(size_t *size, size_t minsize, size_t maxsize, } void -kmem_free(void *ptr, size_t size) +kmem_free(void *ptr) { if (!is_vmalloc_addr(ptr)) { kfree(ptr); @@ -110,7 +110,7 @@ kmem_realloc(void *ptr, size_t newsize, size_t oldsize, if (new) memcpy(new, ptr, ((oldsize < newsize) ? oldsize : newsize)); - kmem_free(ptr, oldsize); + kmem_free(ptr); } return new; } diff --git a/fs/xfs/linux-2.6/kmem.h b/fs/xfs/linux-2.6/kmem.h index a20683cf74dd..a3c96207e60e 100644 --- a/fs/xfs/linux-2.6/kmem.h +++ b/fs/xfs/linux-2.6/kmem.h @@ -58,7 +58,7 @@ extern void *kmem_alloc(size_t, unsigned int __nocast); extern void *kmem_zalloc(size_t, unsigned int __nocast); extern void *kmem_zalloc_greedy(size_t *, size_t, size_t, unsigned int __nocast); extern void *kmem_realloc(void *, size_t, size_t, unsigned int __nocast); -extern void kmem_free(void *, size_t); +extern void kmem_free(void *); /* * Zone interfaces diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c index 98e0e86093b4..ed03c6d3c9c1 100644 --- a/fs/xfs/linux-2.6/xfs_buf.c +++ b/fs/xfs/linux-2.6/xfs_buf.c @@ -310,8 +310,7 @@ _xfs_buf_free_pages( xfs_buf_t *bp) { if (bp->b_pages != bp->b_page_array) { - kmem_free(bp->b_pages, - bp->b_page_count * sizeof(struct page *)); + kmem_free(bp->b_pages); } } @@ -1398,7 +1397,7 @@ STATIC void xfs_free_bufhash( xfs_buftarg_t *btp) { - kmem_free(btp->bt_hash, (1<bt_hashshift) * sizeof(xfs_bufhash_t)); + kmem_free(btp->bt_hash); btp->bt_hash = NULL; } @@ -1444,7 +1443,7 @@ xfs_free_buftarg( xfs_unregister_buftarg(btp); kthread_stop(btp->bt_task); - kmem_free(btp, sizeof(*btp)); + kmem_free(btp); } STATIC int @@ -1575,7 +1574,7 @@ xfs_alloc_buftarg( return btp; error: - kmem_free(btp, sizeof(*btp)); + kmem_free(btp); return NULL; } diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 1b60e46f527f..5c7144bc3106 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1074,7 +1074,7 @@ xfssyncd( list_del(&work->w_list); if (work == &mp->m_sync_work) continue; - kmem_free(work, sizeof(struct bhv_vfs_sync_work)); + kmem_free(work); } } @@ -1222,7 +1222,7 @@ xfs_fs_remount( error = xfs_parseargs(mp, options, args, 1); if (!error) error = xfs_mntupdate(mp, flags, args); - kmem_free(args, sizeof(*args)); + kmem_free(args); return -error; } @@ -1369,7 +1369,7 @@ xfs_fs_fill_super( xfs_itrace_exit(XFS_I(sb->s_root->d_inode)); - kmem_free(args, sizeof(*args)); + kmem_free(args); return 0; fail_vnrele: @@ -1384,7 +1384,7 @@ fail_unmount: xfs_unmount(mp, 0, NULL); fail_vfsop: - kmem_free(args, sizeof(*args)); + kmem_free(args); return -error; } diff --git a/fs/xfs/quota/xfs_dquot_item.c b/fs/xfs/quota/xfs_dquot_item.c index 36e05ca78412..08d2fc89e6a1 100644 --- a/fs/xfs/quota/xfs_dquot_item.c +++ b/fs/xfs/quota/xfs_dquot_item.c @@ -576,8 +576,8 @@ xfs_qm_qoffend_logitem_committed( * xfs_trans_delete_ail() drops the AIL lock. */ xfs_trans_delete_ail(qfs->qql_item.li_mountp, (xfs_log_item_t *)qfs); - kmem_free(qfs, sizeof(xfs_qoff_logitem_t)); - kmem_free(qfe, sizeof(xfs_qoff_logitem_t)); + kmem_free(qfs); + kmem_free(qfe); return (xfs_lsn_t)-1; } diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c index d31cce1165c5..cde5c508f0e0 100644 --- a/fs/xfs/quota/xfs_qm.c +++ b/fs/xfs/quota/xfs_qm.c @@ -192,8 +192,8 @@ xfs_qm_destroy( xfs_qm_list_destroy(&(xqm->qm_usr_dqhtable[i])); xfs_qm_list_destroy(&(xqm->qm_grp_dqhtable[i])); } - kmem_free(xqm->qm_usr_dqhtable, hsize * sizeof(xfs_dqhash_t)); - kmem_free(xqm->qm_grp_dqhtable, hsize * sizeof(xfs_dqhash_t)); + kmem_free(xqm->qm_usr_dqhtable); + kmem_free(xqm->qm_grp_dqhtable); xqm->qm_usr_dqhtable = NULL; xqm->qm_grp_dqhtable = NULL; xqm->qm_dqhashmask = 0; @@ -201,7 +201,7 @@ xfs_qm_destroy( #ifdef DEBUG mutex_destroy(&qcheck_lock); #endif - kmem_free(xqm, sizeof(xfs_qm_t)); + kmem_free(xqm); } /* @@ -1134,7 +1134,7 @@ xfs_qm_init_quotainfo( * and change the superblock accordingly. */ if ((error = xfs_qm_init_quotainos(mp))) { - kmem_free(qinf, sizeof(xfs_quotainfo_t)); + kmem_free(qinf); mp->m_quotainfo = NULL; return error; } @@ -1248,7 +1248,7 @@ xfs_qm_destroy_quotainfo( qi->qi_gquotaip = NULL; } mutex_destroy(&qi->qi_quotaofflock); - kmem_free(qi, sizeof(xfs_quotainfo_t)); + kmem_free(qi); mp->m_quotainfo = NULL; } @@ -1623,7 +1623,7 @@ xfs_qm_dqiterate( break; } while (nmaps > 0); - kmem_free(map, XFS_DQITER_MAP_SIZE * sizeof(*map)); + kmem_free(map); return error; } diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c index 768a3b27d2b6..413671523cb5 100644 --- a/fs/xfs/quota/xfs_qm_syscalls.c +++ b/fs/xfs/quota/xfs_qm_syscalls.c @@ -1449,14 +1449,14 @@ xfs_qm_internalqcheck( for (d = (xfs_dqtest_t *) h1->qh_next; d != NULL; ) { xfs_dqtest_cmp(d); e = (xfs_dqtest_t *) d->HL_NEXT; - kmem_free(d, sizeof(xfs_dqtest_t)); + kmem_free(d); d = e; } h1 = &qmtest_gdqtab[i]; for (d = (xfs_dqtest_t *) h1->qh_next; d != NULL; ) { xfs_dqtest_cmp(d); e = (xfs_dqtest_t *) d->HL_NEXT; - kmem_free(d, sizeof(xfs_dqtest_t)); + kmem_free(d); d = e; } } @@ -1467,8 +1467,8 @@ xfs_qm_internalqcheck( } else { cmn_err(CE_DEBUG, "******** quotacheck successful! ********"); } - kmem_free(qmtest_udqtab, qmtest_hashmask * sizeof(xfs_dqhash_t)); - kmem_free(qmtest_gdqtab, qmtest_hashmask * sizeof(xfs_dqhash_t)); + kmem_free(qmtest_udqtab); + kmem_free(qmtest_gdqtab); mutex_unlock(&qcheck_lock); return (qmtest_nfails); } diff --git a/fs/xfs/support/ktrace.c b/fs/xfs/support/ktrace.c index 0b75d302508f..a34ef05489b1 100644 --- a/fs/xfs/support/ktrace.c +++ b/fs/xfs/support/ktrace.c @@ -89,7 +89,7 @@ ktrace_alloc(int nentries, unsigned int __nocast sleep) if (sleep & KM_SLEEP) panic("ktrace_alloc: NULL memory on KM_SLEEP request!"); - kmem_free(ktp, sizeof(*ktp)); + kmem_free(ktp); return NULL; } @@ -126,7 +126,7 @@ ktrace_free(ktrace_t *ktp) } else { entries_size = (int)(ktp->kt_nentries * sizeof(ktrace_entry_t)); - kmem_free(ktp->kt_entries, entries_size); + kmem_free(ktp->kt_entries); } kmem_zone_free(ktrace_hdr_zone, ktp); diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 303d41e4217b..a85e9caf0156 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -555,7 +555,7 @@ xfs_attr_shortform_to_leaf(xfs_da_args_t *args) out: if(bp) xfs_da_buf_done(bp); - kmem_free(tmpbuffer, size); + kmem_free(tmpbuffer); return(error); } @@ -676,7 +676,7 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context) XFS_ERRLEVEL_LOW, context->dp->i_mount, sfe); xfs_attr_trace_l_c("sf corrupted", context); - kmem_free(sbuf, sbsize); + kmem_free(sbuf); return XFS_ERROR(EFSCORRUPTED); } if (!xfs_attr_namesp_match_overrides(context->flags, sfe->flags)) { @@ -717,7 +717,7 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context) } } if (i == nsbuf) { - kmem_free(sbuf, sbsize); + kmem_free(sbuf); xfs_attr_trace_l_c("blk end", context); return(0); } @@ -747,7 +747,7 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context) cursor->offset++; } - kmem_free(sbuf, sbsize); + kmem_free(sbuf); xfs_attr_trace_l_c("sf E-O-F", context); return(0); } @@ -873,7 +873,7 @@ xfs_attr_leaf_to_shortform(xfs_dabuf_t *bp, xfs_da_args_t *args, int forkoff) error = 0; out: - kmem_free(tmpbuffer, XFS_LBSIZE(dp->i_mount)); + kmem_free(tmpbuffer); return(error); } @@ -1271,7 +1271,7 @@ xfs_attr_leaf_compact(xfs_trans_t *trans, xfs_dabuf_t *bp) be16_to_cpu(hdr_s->count), mp); xfs_da_log_buf(trans, bp, 0, XFS_LBSIZE(mp) - 1); - kmem_free(tmpbuffer, XFS_LBSIZE(mp)); + kmem_free(tmpbuffer); } /* @@ -1921,7 +1921,7 @@ xfs_attr_leaf_unbalance(xfs_da_state_t *state, xfs_da_state_blk_t *drop_blk, be16_to_cpu(drop_hdr->count), mp); } memcpy((char *)save_leaf, (char *)tmp_leaf, state->blocksize); - kmem_free(tmpbuffer, state->blocksize); + kmem_free(tmpbuffer); } xfs_da_log_buf(state->args->trans, save_blk->bp, 0, @@ -2451,7 +2451,7 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context) (int)name_rmt->namelen, valuelen, (char*)args.value); - kmem_free(args.value, valuelen); + kmem_free(args.value); } else { retval = context->put_listent(context, @@ -2954,7 +2954,7 @@ xfs_attr_leaf_inactive(xfs_trans_t **trans, xfs_inode_t *dp, xfs_dabuf_t *bp) error = tmp; /* save only the 1st errno */ } - kmem_free((xfs_caddr_t)list, size); + kmem_free((xfs_caddr_t)list); return(error); } diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index 53c259f5a5af..a612a90aae4a 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -5970,7 +5970,7 @@ unlock_and_return: xfs_iunlock_map_shared(ip, lock); xfs_iunlock(ip, XFS_IOLOCK_SHARED); - kmem_free(map, subnex * sizeof(*map)); + kmem_free(map); return error; } diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index 53a71c62025d..d86ca2c03a70 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -889,9 +889,9 @@ xfs_buf_item_relse( } #ifdef XFS_TRANS_DEBUG - kmem_free(bip->bli_orig, XFS_BUF_COUNT(bp)); + kmem_free(bip->bli_orig); bip->bli_orig = NULL; - kmem_free(bip->bli_logged, XFS_BUF_COUNT(bp) / NBBY); + kmem_free(bip->bli_logged); bip->bli_logged = NULL; #endif /* XFS_TRANS_DEBUG */ @@ -1138,9 +1138,9 @@ xfs_buf_iodone( xfs_trans_delete_ail(mp, (xfs_log_item_t *)bip); #ifdef XFS_TRANS_DEBUG - kmem_free(bip->bli_orig, XFS_BUF_COUNT(bp)); + kmem_free(bip->bli_orig); bip->bli_orig = NULL; - kmem_free(bip->bli_logged, XFS_BUF_COUNT(bp) / NBBY); + kmem_free(bip->bli_logged); bip->bli_logged = NULL; #endif /* XFS_TRANS_DEBUG */ diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index 021a8f7e563f..294780427abb 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -1598,7 +1598,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) args->firstblock, args->total, &mapp[mapi], &nmap, args->flist, NULL))) { - kmem_free(mapp, sizeof(*mapp) * count); + kmem_free(mapp); return error; } if (nmap < 1) @@ -1620,11 +1620,11 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) mapp[mapi - 1].br_startoff + mapp[mapi - 1].br_blockcount != bno + count) { if (mapp != &map) - kmem_free(mapp, sizeof(*mapp) * count); + kmem_free(mapp); return XFS_ERROR(ENOSPC); } if (mapp != &map) - kmem_free(mapp, sizeof(*mapp) * count); + kmem_free(mapp); *new_blkno = (xfs_dablk_t)bno; return 0; } @@ -2090,10 +2090,10 @@ xfs_da_do_buf( } } if (bplist) { - kmem_free(bplist, sizeof(*bplist) * nmap); + kmem_free(bplist); } if (mapp != &map) { - kmem_free(mapp, sizeof(*mapp) * nfsb); + kmem_free(mapp); } if (bpp) *bpp = rbp; @@ -2102,11 +2102,11 @@ exit1: if (bplist) { for (i = 0; i < nbplist; i++) xfs_trans_brelse(trans, bplist[i]); - kmem_free(bplist, sizeof(*bplist) * nmap); + kmem_free(bplist); } exit0: if (mapp != &map) - kmem_free(mapp, sizeof(*mapp) * nfsb); + kmem_free(mapp); if (bpp) *bpp = NULL; return error; @@ -2315,7 +2315,7 @@ xfs_da_buf_done(xfs_dabuf_t *dabuf) if (dabuf->dirty) xfs_da_buf_clean(dabuf); if (dabuf->nbuf > 1) - kmem_free(dabuf->data, BBTOB(dabuf->bbcount)); + kmem_free(dabuf->data); #ifdef XFS_DABUF_DEBUG { spin_lock(&xfs_dabuf_global_lock); @@ -2332,7 +2332,7 @@ xfs_da_buf_done(xfs_dabuf_t *dabuf) if (dabuf->nbuf == 1) kmem_zone_free(xfs_dabuf_zone, dabuf); else - kmem_free(dabuf, XFS_DA_BUF_SIZE(dabuf->nbuf)); + kmem_free(dabuf); } /* @@ -2403,7 +2403,7 @@ xfs_da_brelse(xfs_trans_t *tp, xfs_dabuf_t *dabuf) for (i = 0; i < nbuf; i++) xfs_trans_brelse(tp, bplist[i]); if (bplist != &bp) - kmem_free(bplist, nbuf * sizeof(*bplist)); + kmem_free(bplist); } /* @@ -2429,7 +2429,7 @@ xfs_da_binval(xfs_trans_t *tp, xfs_dabuf_t *dabuf) for (i = 0; i < nbuf; i++) xfs_trans_binval(tp, bplist[i]); if (bplist != &bp) - kmem_free(bplist, nbuf * sizeof(*bplist)); + kmem_free(bplist); } /* diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c index 5f3647cb9885..2211e885ef24 100644 --- a/fs/xfs/xfs_dfrag.c +++ b/fs/xfs/xfs_dfrag.c @@ -116,7 +116,7 @@ xfs_swapext( out_put_file: fput(file); out_free_sxp: - kmem_free(sxp, sizeof(xfs_swapext_t)); + kmem_free(sxp); out: return error; } @@ -381,6 +381,6 @@ xfs_swap_extents( xfs_iunlock(tip, lock_flags); } if (tempifp != NULL) - kmem_free(tempifp, sizeof(xfs_ifork_t)); + kmem_free(tempifp); return error; } diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c index 7cb26529766b..0284af1734bd 100644 --- a/fs/xfs/xfs_dir2.c +++ b/fs/xfs/xfs_dir2.c @@ -493,7 +493,7 @@ xfs_dir2_grow_inode( args->firstblock, args->total, &mapp[mapi], &nmap, args->flist, NULL))) { - kmem_free(mapp, sizeof(*mapp) * count); + kmem_free(mapp); return error; } if (nmap < 1) @@ -525,14 +525,14 @@ xfs_dir2_grow_inode( mapp[mapi - 1].br_startoff + mapp[mapi - 1].br_blockcount != bno + count) { if (mapp != &map) - kmem_free(mapp, sizeof(*mapp) * count); + kmem_free(mapp); return XFS_ERROR(ENOSPC); } /* * Done with the temporary mapping table. */ if (mapp != &map) - kmem_free(mapp, sizeof(*mapp) * count); + kmem_free(mapp); *dbp = xfs_dir2_da_to_db(mp, (xfs_dablk_t)bno); /* * Update file's size if this is the data space and it grew. diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c index fb5a556725b3..e8a7aca5fe23 100644 --- a/fs/xfs/xfs_dir2_block.c +++ b/fs/xfs/xfs_dir2_block.c @@ -1071,7 +1071,7 @@ xfs_dir2_sf_to_block( */ error = xfs_dir2_grow_inode(args, XFS_DIR2_DATA_SPACE, &blkno); if (error) { - kmem_free(buf, buf_len); + kmem_free(buf); return error; } /* @@ -1079,7 +1079,7 @@ xfs_dir2_sf_to_block( */ error = xfs_dir2_data_init(args, blkno, &bp); if (error) { - kmem_free(buf, buf_len); + kmem_free(buf); return error; } block = bp->data; @@ -1198,7 +1198,7 @@ xfs_dir2_sf_to_block( sfep = xfs_dir2_sf_nextentry(sfp, sfep); } /* Done with the temporary buffer */ - kmem_free(buf, buf_len); + kmem_free(buf); /* * Sort the leaf entries by hash value. */ diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c index bc52b803d79b..e33433408e4a 100644 --- a/fs/xfs/xfs_dir2_leaf.c +++ b/fs/xfs/xfs_dir2_leaf.c @@ -1110,7 +1110,7 @@ xfs_dir2_leaf_getdents( *offset = XFS_DIR2_MAX_DATAPTR; else *offset = xfs_dir2_byte_to_dataptr(mp, curoff); - kmem_free(map, map_size * sizeof(*map)); + kmem_free(map); if (bp) xfs_da_brelse(NULL, bp); return error; diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c index 919d275a1cef..ca33bc62edc2 100644 --- a/fs/xfs/xfs_dir2_sf.c +++ b/fs/xfs/xfs_dir2_sf.c @@ -255,7 +255,7 @@ xfs_dir2_block_to_sf( xfs_dir2_sf_check(args); out: xfs_trans_log_inode(args->trans, dp, logflags); - kmem_free(block, mp->m_dirblksize); + kmem_free(block); return error; } @@ -512,7 +512,7 @@ xfs_dir2_sf_addname_hard( sfep = xfs_dir2_sf_nextentry(sfp, sfep); memcpy(sfep, oldsfep, old_isize - nbytes); } - kmem_free(buf, old_isize); + kmem_free(buf); dp->i_d.di_size = new_isize; xfs_dir2_sf_check(args); } @@ -1174,7 +1174,7 @@ xfs_dir2_sf_toino4( /* * Clean up the inode. */ - kmem_free(buf, oldsize); + kmem_free(buf); dp->i_d.di_size = newsize; xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_DDATA); } @@ -1251,7 +1251,7 @@ xfs_dir2_sf_toino8( /* * Clean up the inode. */ - kmem_free(buf, oldsize); + kmem_free(buf); dp->i_d.di_size = newsize; xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_DDATA); } diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c index 05e5365d3c31..7380a00644c8 100644 --- a/fs/xfs/xfs_error.c +++ b/fs/xfs/xfs_error.c @@ -150,8 +150,7 @@ xfs_errortag_clearall(xfs_mount_t *mp, int loud) xfs_etest[i]); xfs_etest[i] = 0; xfs_etest_fsid[i] = 0LL; - kmem_free(xfs_etest_fsname[i], - strlen(xfs_etest_fsname[i]) + 1); + kmem_free(xfs_etest_fsname[i]); xfs_etest_fsname[i] = NULL; } } @@ -175,7 +174,7 @@ xfs_fs_vcmn_err(int level, xfs_mount_t *mp, char *fmt, va_list ap) newfmt = kmem_alloc(len, KM_SLEEP); sprintf(newfmt, "Filesystem \"%s\": %s", mp->m_fsname, fmt); icmn_err(level, newfmt, ap); - kmem_free(newfmt, len); + kmem_free(newfmt); } else { icmn_err(level, fmt, ap); } diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c index 132bd07b9bb8..8aa28f751b2a 100644 --- a/fs/xfs/xfs_extfree_item.c +++ b/fs/xfs/xfs_extfree_item.c @@ -41,8 +41,7 @@ xfs_efi_item_free(xfs_efi_log_item_t *efip) int nexts = efip->efi_format.efi_nextents; if (nexts > XFS_EFI_MAX_FAST_EXTENTS) { - kmem_free(efip, sizeof(xfs_efi_log_item_t) + - (nexts - 1) * sizeof(xfs_extent_t)); + kmem_free(efip); } else { kmem_zone_free(xfs_efi_zone, efip); } @@ -374,8 +373,7 @@ xfs_efd_item_free(xfs_efd_log_item_t *efdp) int nexts = efdp->efd_format.efd_nextents; if (nexts > XFS_EFD_MAX_FAST_EXTENTS) { - kmem_free(efdp, sizeof(xfs_efd_log_item_t) + - (nexts - 1) * sizeof(xfs_extent_t)); + kmem_free(efdp); } else { kmem_zone_free(xfs_efd_zone, efdp); } diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index e569bf5d6cf0..4b21490334b1 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -2258,7 +2258,7 @@ xfs_ifree_cluster( xfs_trans_binval(tp, bp); } - kmem_free(ip_found, ninodes * sizeof(xfs_inode_t *)); + kmem_free(ip_found); xfs_put_perag(mp, pag); } @@ -2470,7 +2470,7 @@ xfs_iroot_realloc( (int)new_size); memcpy(np, op, new_max * (uint)sizeof(xfs_dfsbno_t)); } - kmem_free(ifp->if_broot, ifp->if_broot_bytes); + kmem_free(ifp->if_broot); ifp->if_broot = new_broot; ifp->if_broot_bytes = (int)new_size; ASSERT(ifp->if_broot_bytes <= @@ -2514,7 +2514,7 @@ xfs_idata_realloc( if (new_size == 0) { if (ifp->if_u1.if_data != ifp->if_u2.if_inline_data) { - kmem_free(ifp->if_u1.if_data, ifp->if_real_bytes); + kmem_free(ifp->if_u1.if_data); } ifp->if_u1.if_data = NULL; real_size = 0; @@ -2529,7 +2529,7 @@ xfs_idata_realloc( ASSERT(ifp->if_real_bytes != 0); memcpy(ifp->if_u2.if_inline_data, ifp->if_u1.if_data, new_size); - kmem_free(ifp->if_u1.if_data, ifp->if_real_bytes); + kmem_free(ifp->if_u1.if_data); ifp->if_u1.if_data = ifp->if_u2.if_inline_data; } real_size = 0; @@ -2636,7 +2636,7 @@ xfs_idestroy_fork( ifp = XFS_IFORK_PTR(ip, whichfork); if (ifp->if_broot != NULL) { - kmem_free(ifp->if_broot, ifp->if_broot_bytes); + kmem_free(ifp->if_broot); ifp->if_broot = NULL; } @@ -2650,7 +2650,7 @@ xfs_idestroy_fork( if ((ifp->if_u1.if_data != ifp->if_u2.if_inline_data) && (ifp->if_u1.if_data != NULL)) { ASSERT(ifp->if_real_bytes != 0); - kmem_free(ifp->if_u1.if_data, ifp->if_real_bytes); + kmem_free(ifp->if_u1.if_data); ifp->if_u1.if_data = NULL; ifp->if_real_bytes = 0; } @@ -3058,7 +3058,7 @@ xfs_iflush_cluster( out_free: read_unlock(&pag->pag_ici_lock); - kmem_free(ilist, ilist_size); + kmem_free(ilist); return 0; @@ -3102,7 +3102,7 @@ cluster_corrupt_out: * Unlocks the flush lock */ xfs_iflush_abort(iq); - kmem_free(ilist, ilist_size); + kmem_free(ilist); return XFS_ERROR(EFSCORRUPTED); } @@ -3836,7 +3836,7 @@ xfs_iext_add_indirect_multi( erp = xfs_iext_irec_new(ifp, erp_idx); } memmove(&erp->er_extbuf[i], nex2_ep, byte_diff); - kmem_free(nex2_ep, byte_diff); + kmem_free(nex2_ep); erp->er_extcount += nex2; xfs_iext_irec_update_extoffs(ifp, erp_idx + 1, nex2); } @@ -4112,7 +4112,7 @@ xfs_iext_direct_to_inline( */ memcpy(ifp->if_u2.if_inline_ext, ifp->if_u1.if_extents, nextents * sizeof(xfs_bmbt_rec_t)); - kmem_free(ifp->if_u1.if_extents, ifp->if_real_bytes); + kmem_free(ifp->if_u1.if_extents); ifp->if_u1.if_extents = ifp->if_u2.if_inline_ext; ifp->if_real_bytes = 0; } @@ -4186,7 +4186,7 @@ xfs_iext_indirect_to_direct( ASSERT(ifp->if_real_bytes == XFS_IEXT_BUFSZ); ep = ifp->if_u1.if_ext_irec->er_extbuf; - kmem_free(ifp->if_u1.if_ext_irec, sizeof(xfs_ext_irec_t)); + kmem_free(ifp->if_u1.if_ext_irec); ifp->if_flags &= ~XFS_IFEXTIREC; ifp->if_u1.if_extents = ep; ifp->if_bytes = size; @@ -4212,7 +4212,7 @@ xfs_iext_destroy( } ifp->if_flags &= ~XFS_IFEXTIREC; } else if (ifp->if_real_bytes) { - kmem_free(ifp->if_u1.if_extents, ifp->if_real_bytes); + kmem_free(ifp->if_u1.if_extents); } else if (ifp->if_bytes) { memset(ifp->if_u2.if_inline_ext, 0, XFS_INLINE_EXTS * sizeof(xfs_bmbt_rec_t)); @@ -4483,7 +4483,7 @@ xfs_iext_irec_remove( if (erp->er_extbuf) { xfs_iext_irec_update_extoffs(ifp, erp_idx + 1, -erp->er_extcount); - kmem_free(erp->er_extbuf, XFS_IEXT_BUFSZ); + kmem_free(erp->er_extbuf); } /* Compact extent records */ erp = ifp->if_u1.if_ext_irec; @@ -4501,8 +4501,7 @@ xfs_iext_irec_remove( xfs_iext_realloc_indirect(ifp, nlists * sizeof(xfs_ext_irec_t)); } else { - kmem_free(ifp->if_u1.if_ext_irec, - sizeof(xfs_ext_irec_t)); + kmem_free(ifp->if_u1.if_ext_irec); } ifp->if_real_bytes = nlists * XFS_IEXT_BUFSZ; } @@ -4571,7 +4570,7 @@ xfs_iext_irec_compact_pages( * so er_extoffs don't get modified in * xfs_iext_irec_remove. */ - kmem_free(erp_next->er_extbuf, XFS_IEXT_BUFSZ); + kmem_free(erp_next->er_extbuf); erp_next->er_extbuf = NULL; xfs_iext_irec_remove(ifp, erp_idx + 1); nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; @@ -4614,8 +4613,7 @@ xfs_iext_irec_compact_full( * so er_extoffs don't get modified in * xfs_iext_irec_remove. */ - kmem_free(erp_next->er_extbuf, - erp_next->er_extcount * sizeof(xfs_bmbt_rec_t)); + kmem_free(erp_next->er_extbuf); erp_next->er_extbuf = NULL; xfs_iext_irec_remove(ifp, erp_idx + 1); erp = &ifp->if_u1.if_ext_irec[erp_idx]; diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c index 167b33f15772..0eee08a32c26 100644 --- a/fs/xfs/xfs_inode_item.c +++ b/fs/xfs/xfs_inode_item.c @@ -686,7 +686,7 @@ xfs_inode_item_unlock( ASSERT(ip->i_d.di_nextents > 0); ASSERT(iip->ili_format.ilf_fields & XFS_ILOG_DEXT); ASSERT(ip->i_df.if_bytes > 0); - kmem_free(iip->ili_extents_buf, ip->i_df.if_bytes); + kmem_free(iip->ili_extents_buf); iip->ili_extents_buf = NULL; } if (iip->ili_aextents_buf != NULL) { @@ -694,7 +694,7 @@ xfs_inode_item_unlock( ASSERT(ip->i_d.di_anextents > 0); ASSERT(iip->ili_format.ilf_fields & XFS_ILOG_AEXT); ASSERT(ip->i_afp->if_bytes > 0); - kmem_free(iip->ili_aextents_buf, ip->i_afp->if_bytes); + kmem_free(iip->ili_aextents_buf); iip->ili_aextents_buf = NULL; } @@ -957,8 +957,7 @@ xfs_inode_item_destroy( { #ifdef XFS_TRANS_DEBUG if (ip->i_itemp->ili_root_size != 0) { - kmem_free(ip->i_itemp->ili_orig_root, - ip->i_itemp->ili_root_size); + kmem_free(ip->i_itemp->ili_orig_root); } #endif kmem_zone_free(xfs_ili_zone, ip->i_itemp); diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c index 419de15aeb43..9a3ef9dcaeb9 100644 --- a/fs/xfs/xfs_itable.c +++ b/fs/xfs/xfs_itable.c @@ -257,7 +257,7 @@ xfs_bulkstat_one( *ubused = error; out_free: - kmem_free(buf, sizeof(*buf)); + kmem_free(buf); return error; } @@ -708,7 +708,7 @@ xfs_bulkstat( /* * Done, we're either out of filesystem or space to put the data. */ - kmem_free(irbuf, irbsize); + kmem_free(irbuf); *ubcountp = ubelem; /* * Found some inodes, return them now and return the error next time. @@ -914,7 +914,7 @@ xfs_inumbers( } *lastino = XFS_AGINO_TO_INO(mp, agno, agino); } - kmem_free(buffer, bcount * sizeof(*buffer)); + kmem_free(buffer); if (cur) xfs_btree_del_cursor(cur, (error ? XFS_BTREE_ERROR : XFS_BTREE_NOERROR)); diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index ad3d26ddfe31..16a01abe2490 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -1570,7 +1570,7 @@ xlog_dealloc_log(xlog_t *log) } #endif next_iclog = iclog->ic_next; - kmem_free(iclog, sizeof(xlog_in_core_t)); + kmem_free(iclog); iclog = next_iclog; } freesema(&log->l_flushsema); @@ -1587,7 +1587,7 @@ xlog_dealloc_log(xlog_t *log) } #endif log->l_mp->m_log = NULL; - kmem_free(log, sizeof(xlog_t)); + kmem_free(log); } /* xlog_dealloc_log */ /* diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index e65ab4af0955..9eb722ec744e 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1715,8 +1715,7 @@ xlog_check_buffer_cancelled( } else { prevp->bc_next = bcp->bc_next; } - kmem_free(bcp, - sizeof(xfs_buf_cancel_t)); + kmem_free(bcp); } } return 1; @@ -2519,7 +2518,7 @@ write_inode_buffer: error: if (need_free) - kmem_free(in_f, sizeof(*in_f)); + kmem_free(in_f); return XFS_ERROR(error); } @@ -2830,16 +2829,14 @@ xlog_recover_free_trans( item = item->ri_next; /* Free the regions in the item. */ for (i = 0; i < free_item->ri_cnt; i++) { - kmem_free(free_item->ri_buf[i].i_addr, - free_item->ri_buf[i].i_len); + kmem_free(free_item->ri_buf[i].i_addr); } /* Free the item itself */ - kmem_free(free_item->ri_buf, - (free_item->ri_total * sizeof(xfs_log_iovec_t))); - kmem_free(free_item, sizeof(xlog_recover_item_t)); + kmem_free(free_item->ri_buf); + kmem_free(free_item); } while (first_item != item); /* Free the transaction recover structure */ - kmem_free(trans, sizeof(xlog_recover_t)); + kmem_free(trans); } STATIC int @@ -3786,8 +3783,7 @@ xlog_do_log_recovery( error = xlog_do_recovery_pass(log, head_blk, tail_blk, XLOG_RECOVER_PASS1); if (error != 0) { - kmem_free(log->l_buf_cancel_table, - XLOG_BC_TABLE_SIZE * sizeof(xfs_buf_cancel_t*)); + kmem_free(log->l_buf_cancel_table); log->l_buf_cancel_table = NULL; return error; } @@ -3806,8 +3802,7 @@ xlog_do_log_recovery( } #endif /* DEBUG */ - kmem_free(log->l_buf_cancel_table, - XLOG_BC_TABLE_SIZE * sizeof(xfs_buf_cancel_t*)); + kmem_free(log->l_buf_cancel_table); log->l_buf_cancel_table = NULL; return error; diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 361c7a755a07..c63f410ccfaa 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -161,11 +161,8 @@ xfs_mount_free( for (agno = 0; agno < mp->m_maxagi; agno++) if (mp->m_perag[agno].pagb_list) - kmem_free(mp->m_perag[agno].pagb_list, - sizeof(xfs_perag_busy_t) * - XFS_PAGB_NUM_SLOTS); - kmem_free(mp->m_perag, - sizeof(xfs_perag_t) * mp->m_sb.sb_agcount); + kmem_free(mp->m_perag[agno].pagb_list); + kmem_free(mp->m_perag); } spinlock_destroy(&mp->m_ail_lock); @@ -176,11 +173,11 @@ xfs_mount_free( XFS_QM_DONE(mp); if (mp->m_fsname != NULL) - kmem_free(mp->m_fsname, mp->m_fsname_len); + kmem_free(mp->m_fsname); if (mp->m_rtname != NULL) - kmem_free(mp->m_rtname, strlen(mp->m_rtname) + 1); + kmem_free(mp->m_rtname); if (mp->m_logname != NULL) - kmem_free(mp->m_logname, strlen(mp->m_logname) + 1); + kmem_free(mp->m_logname); xfs_icsb_destroy_counters(mp); } @@ -1265,9 +1262,8 @@ xfs_mountfs( error2: for (agno = 0; agno < sbp->sb_agcount; agno++) if (mp->m_perag[agno].pagb_list) - kmem_free(mp->m_perag[agno].pagb_list, - sizeof(xfs_perag_busy_t) * XFS_PAGB_NUM_SLOTS); - kmem_free(mp->m_perag, sbp->sb_agcount * sizeof(xfs_perag_t)); + kmem_free(mp->m_perag[agno].pagb_list); + kmem_free(mp->m_perag); mp->m_perag = NULL; /* FALLTHROUGH */ error1: diff --git a/fs/xfs/xfs_mru_cache.c b/fs/xfs/xfs_mru_cache.c index a0b2c0a2589a..26d14a1e0e14 100644 --- a/fs/xfs/xfs_mru_cache.c +++ b/fs/xfs/xfs_mru_cache.c @@ -382,9 +382,9 @@ xfs_mru_cache_create( exit: if (err && mru && mru->lists) - kmem_free(mru->lists, mru->grp_count * sizeof(*mru->lists)); + kmem_free(mru->lists); if (err && mru) - kmem_free(mru, sizeof(*mru)); + kmem_free(mru); return err; } @@ -424,8 +424,8 @@ xfs_mru_cache_destroy( xfs_mru_cache_flush(mru); - kmem_free(mru->lists, mru->grp_count * sizeof(*mru->lists)); - kmem_free(mru, sizeof(*mru)); + kmem_free(mru->lists); + kmem_free(mru); } /* diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c index a0dc6e5bc5b9..bf87a5913504 100644 --- a/fs/xfs/xfs_rtalloc.c +++ b/fs/xfs/xfs_rtalloc.c @@ -2062,7 +2062,7 @@ xfs_growfs_rt( /* * Free the fake mp structure. */ - kmem_free(nmp, sizeof(*nmp)); + kmem_free(nmp); return error; } diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c index 140386434aa3..e4ebddd3c500 100644 --- a/fs/xfs/xfs_trans.c +++ b/fs/xfs/xfs_trans.c @@ -889,7 +889,7 @@ shut_us_down: tp->t_commit_lsn = commit_lsn; if (nvec > XFS_TRANS_LOGVEC_COUNT) { - kmem_free(log_vector, nvec * sizeof(xfs_log_iovec_t)); + kmem_free(log_vector); } /* @@ -1265,7 +1265,7 @@ xfs_trans_committed( ASSERT(!XFS_LIC_ARE_ALL_FREE(licp)); xfs_trans_chunk_committed(licp, tp->t_lsn, abortflag); next_licp = licp->lic_next; - kmem_free(licp, sizeof(xfs_log_item_chunk_t)); + kmem_free(licp); licp = next_licp; } diff --git a/fs/xfs/xfs_trans_inode.c b/fs/xfs/xfs_trans_inode.c index 4c70bf5e9985..2a1c0f071f91 100644 --- a/fs/xfs/xfs_trans_inode.c +++ b/fs/xfs/xfs_trans_inode.c @@ -291,7 +291,7 @@ xfs_trans_inode_broot_debug( iip = ip->i_itemp; if (iip->ili_root_size != 0) { ASSERT(iip->ili_orig_root != NULL); - kmem_free(iip->ili_orig_root, iip->ili_root_size); + kmem_free(iip->ili_orig_root); iip->ili_root_size = 0; iip->ili_orig_root = NULL; } diff --git a/fs/xfs/xfs_trans_item.c b/fs/xfs/xfs_trans_item.c index 66a09f0d894b..db5c83595526 100644 --- a/fs/xfs/xfs_trans_item.c +++ b/fs/xfs/xfs_trans_item.c @@ -161,7 +161,7 @@ xfs_trans_free_item(xfs_trans_t *tp, xfs_log_item_desc_t *lidp) licpp = &((*licpp)->lic_next); } *licpp = licp->lic_next; - kmem_free(licp, sizeof(xfs_log_item_chunk_t)); + kmem_free(licp); tp->t_items_free -= XFS_LIC_NUM_SLOTS; } } @@ -314,7 +314,7 @@ xfs_trans_free_items( ASSERT(!XFS_LIC_ARE_ALL_FREE(licp)); (void) xfs_trans_unlock_chunk(licp, 1, abort, NULLCOMMITLSN); next_licp = licp->lic_next; - kmem_free(licp, sizeof(xfs_log_item_chunk_t)); + kmem_free(licp); licp = next_licp; } @@ -363,7 +363,7 @@ xfs_trans_unlock_items(xfs_trans_t *tp, xfs_lsn_t commit_lsn) next_licp = licp->lic_next; if (XFS_LIC_ARE_ALL_FREE(licp)) { *licpp = next_licp; - kmem_free(licp, sizeof(xfs_log_item_chunk_t)); + kmem_free(licp); freed -= XFS_LIC_NUM_SLOTS; } else { licpp = &(licp->lic_next); @@ -530,7 +530,7 @@ xfs_trans_free_busy(xfs_trans_t *tp) lbcp = tp->t_busy.lbc_next; while (lbcp != NULL) { lbcq = lbcp->lbc_next; - kmem_free(lbcp, sizeof(xfs_log_busy_chunk_t)); + kmem_free(lbcp); lbcp = lbcq; } diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c index bbc911720d81..a005cebf5041 100644 --- a/fs/xfs/xfs_vfsops.c +++ b/fs/xfs/xfs_vfsops.c @@ -639,7 +639,7 @@ out: xfs_unmountfs(mp, credp); xfs_qmops_put(mp); xfs_dmops_put(mp); - kmem_free(mp, sizeof(xfs_mount_t)); + kmem_free(mp); } return XFS_ERROR(error); @@ -1055,7 +1055,7 @@ xfs_sync_inodes( if (XFS_FORCED_SHUTDOWN(mp) && !(flags & SYNC_CLOSE)) { XFS_MOUNT_IUNLOCK(mp); - kmem_free(ipointer, sizeof(xfs_iptr_t)); + kmem_free(ipointer); return 0; } @@ -1201,7 +1201,7 @@ xfs_sync_inodes( } XFS_MOUNT_IUNLOCK(mp); ASSERT(ipointer_in == B_FALSE); - kmem_free(ipointer, sizeof(xfs_iptr_t)); + kmem_free(ipointer); return XFS_ERROR(error); } @@ -1231,7 +1231,7 @@ xfs_sync_inodes( ASSERT(ipointer_in == B_FALSE); - kmem_free(ipointer, sizeof(xfs_iptr_t)); + kmem_free(ipointer); return XFS_ERROR(last_error); } -- cgit v1.2.3 From 4f0e8a9816e78306bb821018613dbd2513184d8a Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Mon, 19 May 2008 16:34:04 +1000 Subject: [XFS] Remove unused Falgs parameter from xfs_qm_dqpurge() SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31056a Signed-off-by: Denys Vlasenko Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/quota/xfs_dquot.c | 3 +-- fs/xfs/quota/xfs_dquot.h | 2 +- fs/xfs/quota/xfs_qm.c | 2 +- 3 files changed, 3 insertions(+), 4 deletions(-) diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c index 85df3288efd5..fc9f3fb39b7b 100644 --- a/fs/xfs/quota/xfs_dquot.c +++ b/fs/xfs/quota/xfs_dquot.c @@ -1435,8 +1435,7 @@ xfs_dqlock2( /* ARGSUSED */ int xfs_qm_dqpurge( - xfs_dquot_t *dqp, - uint flags) + xfs_dquot_t *dqp) { xfs_dqhash_t *thishash; xfs_mount_t *mp = dqp->q_mount; diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/quota/xfs_dquot.h index 5c371a92e3e2..f7393bba4e95 100644 --- a/fs/xfs/quota/xfs_dquot.h +++ b/fs/xfs/quota/xfs_dquot.h @@ -164,7 +164,7 @@ extern void xfs_qm_dqprint(xfs_dquot_t *); extern void xfs_qm_dqdestroy(xfs_dquot_t *); extern int xfs_qm_dqflush(xfs_dquot_t *, uint); -extern int xfs_qm_dqpurge(xfs_dquot_t *, uint); +extern int xfs_qm_dqpurge(xfs_dquot_t *); extern void xfs_qm_dqunpin_wait(xfs_dquot_t *); extern int xfs_qm_dqlock_nowait(xfs_dquot_t *); extern int xfs_qm_dqflock_nowait(xfs_dquot_t *); diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c index cde5c508f0e0..26370a3128f5 100644 --- a/fs/xfs/quota/xfs_qm.c +++ b/fs/xfs/quota/xfs_qm.c @@ -631,7 +631,7 @@ xfs_qm_dqpurge_int( * freelist in INACTIVE state. */ nextdqp = dqp->MPL_NEXT; - nmisses += xfs_qm_dqpurge(dqp, flags); + nmisses += xfs_qm_dqpurge(dqp); dqp = nextdqp; } xfs_qm_mplist_unlock(mp); -- cgit v1.2.3 From b41759cf11c84ad0d569c0ef200c449ad2cc24e3 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Mon, 19 May 2008 16:34:11 +1000 Subject: [XFS] Remove unused wbc parameter from xfs_start_page_writeback() SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31057a Signed-off-by: Denys Vlasenko Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_aops.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c index a55c3b26d840..0b211cba1909 100644 --- a/fs/xfs/linux-2.6/xfs_aops.c +++ b/fs/xfs/linux-2.6/xfs_aops.c @@ -409,7 +409,6 @@ xfs_start_buffer_writeback( STATIC void xfs_start_page_writeback( struct page *page, - struct writeback_control *wbc, int clear_dirty, int buffers) { @@ -858,7 +857,7 @@ xfs_convert_page( done = 1; } } - xfs_start_page_writeback(page, wbc, !page_dirty, count); + xfs_start_page_writeback(page, !page_dirty, count); } return done; @@ -1130,7 +1129,7 @@ xfs_page_state_convert( SetPageUptodate(page); if (startio) - xfs_start_page_writeback(page, wbc, 1, count); + xfs_start_page_writeback(page, 1, count); if (ioend && iomap_valid) { offset = (iomap.iomap_offset + iomap.iomap_bsize - 1) >> -- cgit v1.2.3 From d729eae8933cb3eb8edf1446532c178b66b293a9 Mon Sep 17 00:00:00 2001 From: Michael Nishimoto Date: Mon, 19 May 2008 16:34:20 +1000 Subject: [XFS] Ensure that 2 GiB xfs logs work properly. We found this while experimenting with 2GiB xfs logs. The previous code never assumed that xfs logs would ever get so large. SGI-PV: 981502 SGI-Modid: xfs-linux-melb:xfs-kern:31058a Signed-off-by: Michael Nishimoto Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_log.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 16a01abe2490..6195cc880101 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -226,20 +226,24 @@ xlog_grant_sub_space(struct log *log, int bytes) static void xlog_grant_add_space_write(struct log *log, int bytes) { - log->l_grant_write_bytes += bytes; - if (log->l_grant_write_bytes > log->l_logsize) { - log->l_grant_write_bytes -= log->l_logsize; + int tmp = log->l_logsize - log->l_grant_write_bytes; + if (tmp > bytes) + log->l_grant_write_bytes += bytes; + else { log->l_grant_write_cycle++; + log->l_grant_write_bytes = bytes - tmp; } } static void xlog_grant_add_space_reserve(struct log *log, int bytes) { - log->l_grant_reserve_bytes += bytes; - if (log->l_grant_reserve_bytes > log->l_logsize) { - log->l_grant_reserve_bytes -= log->l_logsize; + int tmp = log->l_logsize - log->l_grant_reserve_bytes; + if (tmp > bytes) + log->l_grant_reserve_bytes += bytes; + else { log->l_grant_reserve_cycle++; + log->l_grant_reserve_bytes = bytes - tmp; } } -- cgit v1.2.3 From d748c62367eb630cc30b91d561a5362f597a0892 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 19 May 2008 16:34:27 +1000 Subject: [XFS] Convert l_flushsema to a sv_t The l_flushsema doesn't exactly have completion semantics, nor mutex semantics. It's used as a list of tasks which are waiting to be notified that a flush has completed. It was also being used in a way that was potentially racy, depending on the semaphore implementation. By using a sv_t instead of a semaphore we avoid the need for a separate counter, since we know we just need to wake everything on the queue. Original waitqueue implementation from Matthew Wilcox. Cleanup and conversion to sv_t by Christoph Hellwig. SGI-PV: 981507 SGI-Modid: xfs-linux-melb:xfs-kern:31059a Signed-off-by: Matthew Wilcox Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_log.c | 29 +++++++++++++---------------- fs/xfs/xfs_log_priv.h | 6 ++---- 2 files changed, 15 insertions(+), 20 deletions(-) diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 6195cc880101..91b00a5686cd 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -1232,7 +1232,7 @@ xlog_alloc_log(xfs_mount_t *mp, spin_lock_init(&log->l_icloglock); spin_lock_init(&log->l_grant_lock); - initnsema(&log->l_flushsema, 0, "ic-flush"); + sv_init(&log->l_flush_wait, 0, "flush_wait"); /* log record size must be multiple of BBSIZE; see xlog_rec_header_t */ ASSERT((XFS_BUF_SIZE(bp) & BBMASK) == 0); @@ -1577,7 +1577,6 @@ xlog_dealloc_log(xlog_t *log) kmem_free(iclog); iclog = next_iclog; } - freesema(&log->l_flushsema); spinlock_destroy(&log->l_icloglock); spinlock_destroy(&log->l_grant_lock); @@ -2101,6 +2100,7 @@ xlog_state_do_callback( int funcdidcallbacks; /* flag: function did callbacks */ int repeats; /* for issuing console warnings if * looping too many times */ + int wake = 0; spin_lock(&log->l_icloglock); first_iclog = iclog = log->l_iclog; @@ -2282,15 +2282,13 @@ xlog_state_do_callback( } #endif - flushcnt = 0; - if (log->l_iclog->ic_state & (XLOG_STATE_ACTIVE|XLOG_STATE_IOERROR)) { - flushcnt = log->l_flushcnt; - log->l_flushcnt = 0; - } + if (log->l_iclog->ic_state & (XLOG_STATE_ACTIVE|XLOG_STATE_IOERROR)) + wake = 1; spin_unlock(&log->l_icloglock); - while (flushcnt--) - vsema(&log->l_flushsema); -} /* xlog_state_do_callback */ + + if (wake) + sv_broadcast(&log->l_flush_wait); +} /* @@ -2388,16 +2386,15 @@ restart: } iclog = log->l_iclog; - if (! (iclog->ic_state == XLOG_STATE_ACTIVE)) { - log->l_flushcnt++; - spin_unlock(&log->l_icloglock); + if (iclog->ic_state != XLOG_STATE_ACTIVE) { xlog_trace_iclog(iclog, XLOG_TRACE_SLEEP_FLUSH); XFS_STATS_INC(xs_log_noiclogs); - /* Ensure that log writes happen */ - psema(&log->l_flushsema, PINOD); + + /* Wait for log writes to have flushed */ + sv_wait(&log->l_flush_wait, 0, &log->l_icloglock, 0); goto restart; } - ASSERT(iclog->ic_state == XLOG_STATE_ACTIVE); + head = &iclog->ic_header; atomic_inc(&iclog->ic_refcnt); /* prevents sync */ diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h index 8952a392b5f3..6245913196b4 100644 --- a/fs/xfs/xfs_log_priv.h +++ b/fs/xfs/xfs_log_priv.h @@ -423,10 +423,8 @@ typedef struct log { int l_logBBsize; /* size of log in BB chunks */ /* The following block of fields are changed while holding icloglock */ - sema_t l_flushsema ____cacheline_aligned_in_smp; - /* iclog flushing semaphore */ - int l_flushcnt; /* # of procs waiting on this - * sema */ + sv_t l_flush_wait ____cacheline_aligned_in_smp; + /* waiting for iclog flush */ int l_covered_state;/* state of "covering disk * log entries" */ xlog_in_core_t *l_iclog; /* head log queue */ -- cgit v1.2.3 From 911ee3de3d1cb6620e2ac4e0678ff434867e2644 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 May 2008 16:34:34 +1000 Subject: [XFS] Kill attr_capable checks as already done in xattr_permission. No need for addition permission checks in the xattr handler, fs/xattr.c:xattr_permission() already does them, and in fact slightly more strict then what was in the attr_capable handlers. SGI-PV: 981809 SGI-Modid: xfs-linux-melb:xfs-kern:31164a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_iops.c | 13 +------------ fs/xfs/xfs_attr.c | 41 ----------------------------------------- fs/xfs/xfs_attr.h | 2 -- 3 files changed, 1 insertion(+), 55 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 5fc61c824bb9..13b6cfd366c2 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -739,15 +739,11 @@ xfs_vn_setxattr( char *attr = (char *)name; attrnames_t *namesp; int xflags = 0; - int error; namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT); if (!namesp) return -EOPNOTSUPP; attr += namesp->attr_namelen; - error = namesp->attr_capable(vp, NULL); - if (error) - return error; /* Convert Linux syscall to XFS internal ATTR flags */ if (flags & XATTR_CREATE) @@ -769,15 +765,11 @@ xfs_vn_getxattr( char *attr = (char *)name; attrnames_t *namesp; int xflags = 0; - ssize_t error; namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT); if (!namesp) return -EOPNOTSUPP; attr += namesp->attr_namelen; - error = namesp->attr_capable(vp, NULL); - if (error) - return error; /* Convert Linux syscall to XFS internal ATTR flags */ if (!size) { @@ -817,15 +809,12 @@ xfs_vn_removexattr( char *attr = (char *)name; attrnames_t *namesp; int xflags = 0; - int error; namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT); if (!namesp) return -EOPNOTSUPP; attr += namesp->attr_namelen; - error = namesp->attr_capable(vp, NULL); - if (error) - return error; + xflags |= namesp->attr_flag; return namesp->attr_remove(vp, attr, xflags); } diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index df151a859186..86d8619f279c 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -2622,43 +2622,6 @@ attr_lookup_namespace( return NULL; } -/* - * Some checks to prevent people abusing EAs to get over quota: - * - Don't allow modifying user EAs on devices/symlinks; - * - Don't allow modifying user EAs if sticky bit set; - */ -STATIC int -attr_user_capable( - bhv_vnode_t *vp, - cred_t *cred) -{ - struct inode *inode = vn_to_inode(vp); - - if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) - return -EPERM; - if (!S_ISREG(inode->i_mode) && !S_ISDIR(inode->i_mode) && - !capable(CAP_SYS_ADMIN)) - return -EPERM; - if (S_ISDIR(inode->i_mode) && (inode->i_mode & S_ISVTX) && - (current_fsuid(cred) != inode->i_uid) && !capable(CAP_FOWNER)) - return -EPERM; - return 0; -} - -STATIC int -attr_trusted_capable( - bhv_vnode_t *vp, - cred_t *cred) -{ - struct inode *inode = vn_to_inode(vp); - - if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) - return -EPERM; - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - return 0; -} - STATIC int attr_system_set( bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) @@ -2709,7 +2672,6 @@ struct attrnames attr_system = { .attr_get = attr_system_get, .attr_set = attr_system_set, .attr_remove = attr_system_remove, - .attr_capable = (attrcapable_t)fs_noerr, }; struct attrnames attr_trusted = { @@ -2719,7 +2681,6 @@ struct attrnames attr_trusted = { .attr_get = attr_generic_get, .attr_set = attr_generic_set, .attr_remove = attr_generic_remove, - .attr_capable = attr_trusted_capable, }; struct attrnames attr_secure = { @@ -2729,7 +2690,6 @@ struct attrnames attr_secure = { .attr_get = attr_generic_get, .attr_set = attr_generic_set, .attr_remove = attr_generic_remove, - .attr_capable = (attrcapable_t)fs_noerr, }; struct attrnames attr_user = { @@ -2738,7 +2698,6 @@ struct attrnames attr_user = { .attr_get = attr_generic_get, .attr_set = attr_generic_set, .attr_remove = attr_generic_remove, - .attr_capable = attr_user_capable, }; struct attrnames *attr_namespaces[] = diff --git a/fs/xfs/xfs_attr.h b/fs/xfs/xfs_attr.h index 6cfc9384fe35..9b96d171b75c 100644 --- a/fs/xfs/xfs_attr.h +++ b/fs/xfs/xfs_attr.h @@ -42,7 +42,6 @@ typedef int (*attrset_t)(bhv_vnode_t *, char *, void *, size_t, int); typedef int (*attrget_t)(bhv_vnode_t *, char *, void *, size_t, int); typedef int (*attrremove_t)(bhv_vnode_t *, char *, int); typedef int (*attrexists_t)(bhv_vnode_t *); -typedef int (*attrcapable_t)(bhv_vnode_t *, struct cred *); typedef struct attrnames { char * attr_name; @@ -52,7 +51,6 @@ typedef struct attrnames { attrset_t attr_set; attrremove_t attr_remove; attrexists_t attr_exists; - attrcapable_t attr_capable; } attrnames_t; #define ATTR_NAMECOUNT 4 -- cgit v1.2.3 From 4b166de0a061e4e89d0741a5d080b141f11e2c9b Mon Sep 17 00:00:00 2001 From: David Chinner Date: Tue, 20 May 2008 11:30:27 +1000 Subject: [XFS] Update valid fields in xfs_mount_log_sb() Recent changes to update the version number during mount (attr2 stuff) failed to change the assert that checked for calid flags being changed on mount. Clearly this path hasn't been exercised by the test code.... SGI-PV: 981950 SGI-Modid: xfs-linux-melb:xfs-kern:31183a Signed-off-by: David Chinner Signed-off-by: Eric Sandeen Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_mount.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index c63f410ccfaa..b484ca32641f 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -1934,7 +1934,8 @@ xfs_mount_log_sb( int error; ASSERT(fields & (XFS_SB_UNIT | XFS_SB_WIDTH | XFS_SB_UUID | - XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2)); + XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2 | + XFS_SB_VERSIONNUM)); tp = xfs_trans_alloc(mp, XFS_TRANS_SB_UNIT); error = xfs_trans_reserve(tp, 0, mp->m_sb.sb_sectsize + 128, 0, 0, -- cgit v1.2.3 From fa6adbe08825274a3803abb9aef365f939be7da5 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 11:30:33 +1000 Subject: [XFS] kill xfs_uuid_unmount Quite useless wrapper that doesn't help making the code more readable. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31184a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_mount.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index b484ca32641f..fca3f8af6746 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -47,7 +47,6 @@ STATIC int xfs_mount_log_sb(xfs_mount_t *, __int64_t); STATIC int xfs_uuid_mount(xfs_mount_t *); -STATIC void xfs_uuid_unmount(xfs_mount_t *mp); STATIC void xfs_unmountfs_wait(xfs_mount_t *); @@ -1268,7 +1267,7 @@ xfs_mountfs( /* FALLTHROUGH */ error1: if (uuid_mounted) - xfs_uuid_unmount(mp); + uuid_table_remove(&mp->m_sb.sb_uuid); xfs_freesb(mp); return error; } @@ -1349,7 +1348,7 @@ xfs_unmountfs(xfs_mount_t *mp, struct cred *cr) xfs_unmountfs_close(mp, cr); if ((mp->m_flags & XFS_MOUNT_NOUUID) == 0) - xfs_uuid_unmount(mp); + uuid_table_remove(&mp->m_sb.sb_uuid); #if defined(DEBUG) || defined(INDUCE_IO_ERROR) xfs_errortag_clearall(mp, 0); @@ -1910,16 +1909,6 @@ xfs_uuid_mount( return 0; } -/* - * Remove filesystem from the UUID table. - */ -STATIC void -xfs_uuid_unmount( - xfs_mount_t *mp) -{ - uuid_table_remove(&mp->m_sb.sb_uuid); -} - /* * Used to log changes to the superblock unit and width fields which could * be altered by the mount options, as well as any potential sb_features2 -- cgit v1.2.3 From 48b62a1a97f118a5a71ae9222bc6d3481d6b757b Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 11:30:39 +1000 Subject: [XFS] merge xfs_mntupdate into xfs_fs_remount xfs_mntupdate already is completely Linux specific due to the VFS flags passed in, so it might aswell be merged into xfs_fs_remount. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31185a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 23 +++++++++++++++++++++-- fs/xfs/xfs_vfsops.c | 24 ------------------------ fs/xfs/xfs_vfsops.h | 2 -- 3 files changed, 21 insertions(+), 28 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 5c7144bc3106..a3ecdf442465 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -52,6 +52,7 @@ #include "xfs_version.h" #include "xfs_log_priv.h" #include "xfs_trans_priv.h" +#include "xfs_filestream.h" #include #include @@ -1220,8 +1221,26 @@ xfs_fs_remount( int error; error = xfs_parseargs(mp, options, args, 1); - if (!error) - error = xfs_mntupdate(mp, flags, args); + if (error) + goto out_free_args; + + if (!(*flags & MS_RDONLY)) { /* rw/ro -> rw */ + if (mp->m_flags & XFS_MOUNT_RDONLY) + mp->m_flags &= ~XFS_MOUNT_RDONLY; + if (args->flags & XFSMNT_BARRIER) { + mp->m_flags |= XFS_MOUNT_BARRIER; + xfs_mountfs_check_barriers(mp); + } else { + mp->m_flags &= ~XFS_MOUNT_BARRIER; + } + } else if (!(mp->m_flags & XFS_MOUNT_RDONLY)) { /* rw -> ro */ + xfs_filestream_flush(mp); + xfs_sync(mp, SYNC_DATA_QUIESCE); + xfs_attr_quiesce(mp); + mp->m_flags |= XFS_MOUNT_RDONLY; + } + + out_free_args: kmem_free(args); return -error; } diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c index a005cebf5041..e223aeab68be 100644 --- a/fs/xfs/xfs_vfsops.c +++ b/fs/xfs/xfs_vfsops.c @@ -701,30 +701,6 @@ xfs_attr_quiesce( xfs_unmountfs_writesb(mp); } -int -xfs_mntupdate( - struct xfs_mount *mp, - int *flags, - struct xfs_mount_args *args) -{ - if (!(*flags & MS_RDONLY)) { /* rw/ro -> rw */ - if (mp->m_flags & XFS_MOUNT_RDONLY) - mp->m_flags &= ~XFS_MOUNT_RDONLY; - if (args->flags & XFSMNT_BARRIER) { - mp->m_flags |= XFS_MOUNT_BARRIER; - xfs_mountfs_check_barriers(mp); - } else { - mp->m_flags &= ~XFS_MOUNT_BARRIER; - } - } else if (!(mp->m_flags & XFS_MOUNT_RDONLY)) { /* rw -> ro */ - xfs_filestream_flush(mp); - xfs_sync(mp, SYNC_DATA_QUIESCE); - xfs_attr_quiesce(mp); - mp->m_flags |= XFS_MOUNT_RDONLY; - } - return 0; -} - /* * xfs_unmount_flush implements a set of flush operation on special * inodes, which are needed as a separate set of operations so that diff --git a/fs/xfs/xfs_vfsops.h b/fs/xfs/xfs_vfsops.h index 1688817c55ed..995091f19499 100644 --- a/fs/xfs/xfs_vfsops.h +++ b/fs/xfs/xfs_vfsops.h @@ -11,8 +11,6 @@ struct xfs_mount_args; int xfs_mount(struct xfs_mount *mp, struct xfs_mount_args *args, struct cred *credp); int xfs_unmount(struct xfs_mount *mp, int flags, struct cred *credp); -int xfs_mntupdate(struct xfs_mount *mp, int *flags, - struct xfs_mount_args *args); int xfs_sync(struct xfs_mount *mp, int flags); void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname, int lnnum); -- cgit v1.2.3 From 61436febae29085bffc7c291db03cbd709dc68a3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 11:30:46 +1000 Subject: [XFS] kill xfs_igrow_start and xfs_igrow_finish xfs_igrow_start just expands to xfs_zero_eof with two asserts that are useless in the context of the only caller and some rather confusing comments. xfs_igrow_finish is just a few lines of code decorated again with useless asserts and confusing comments. Just kill those two and merge them into xfs_setattr. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31186a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_inode.c | 61 --------------------------------------------------- fs/xfs/xfs_inode.h | 3 --- fs/xfs/xfs_vnodeops.c | 15 ++++++++++--- 3 files changed, 12 insertions(+), 67 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 4b21490334b1..199a36ac8e2d 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1763,67 +1763,6 @@ xfs_itruncate_finish( return 0; } - -/* - * xfs_igrow_start - * - * Do the first part of growing a file: zero any data in the last - * block that is beyond the old EOF. We need to do this before - * the inode is joined to the transaction to modify the i_size. - * That way we can drop the inode lock and call into the buffer - * cache to get the buffer mapping the EOF. - */ -int -xfs_igrow_start( - xfs_inode_t *ip, - xfs_fsize_t new_size, - cred_t *credp) -{ - ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL)); - ASSERT(new_size > ip->i_size); - - /* - * Zero any pages that may have been created by - * xfs_write_file() beyond the end of the file - * and any blocks between the old and new file sizes. - */ - return xfs_zero_eof(ip, new_size, ip->i_size); -} - -/* - * xfs_igrow_finish - * - * This routine is called to extend the size of a file. - * The inode must have both the iolock and the ilock locked - * for update and it must be a part of the current transaction. - * The xfs_igrow_start() function must have been called previously. - * If the change_flag is not zero, the inode change timestamp will - * be updated. - */ -void -xfs_igrow_finish( - xfs_trans_t *tp, - xfs_inode_t *ip, - xfs_fsize_t new_size, - int change_flag) -{ - ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL)); - ASSERT(ip->i_transp == tp); - ASSERT(new_size > ip->i_size); - - /* - * Update the file size. Update the inode change timestamp - * if change_flag set. - */ - ip->i_d.di_size = new_size; - ip->i_size = new_size; - if (change_flag) - xfs_ichgtime(ip, XFS_ICHGTIME_CHG); - xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); - -} - - /* * This is called when the inode's link count goes to 0. * We place the on-disk inode on a list in the AGI. It diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h index 0a999fee4f03..17a04b6321ed 100644 --- a/fs/xfs/xfs_inode.h +++ b/fs/xfs/xfs_inode.h @@ -507,9 +507,6 @@ int xfs_itruncate_start(xfs_inode_t *, uint, xfs_fsize_t); int xfs_itruncate_finish(struct xfs_trans **, xfs_inode_t *, xfs_fsize_t, int, int); int xfs_iunlink(struct xfs_trans *, xfs_inode_t *); -int xfs_igrow_start(xfs_inode_t *, xfs_fsize_t, struct cred *); -void xfs_igrow_finish(struct xfs_trans *, xfs_inode_t *, - xfs_fsize_t, int); void xfs_idestroy_fork(xfs_inode_t *, int); void xfs_idestroy(xfs_inode_t *); diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index e475e3717eb3..9b8b87fcd4ec 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -444,7 +444,13 @@ xfs_setattr( code = 0; if ((vap->va_size > ip->i_size) && (flags & ATTR_NOSIZETOK) == 0) { - code = xfs_igrow_start(ip, vap->va_size, credp); + /* + * Do the first part of growing a file: zero any data + * in the last block that is beyond the old EOF. We + * need to do this before the inode is joined to the + * transaction to modify the i_size. + */ + code = xfs_zero_eof(ip, vap->va_size, ip->i_size); } xfs_iunlock(ip, XFS_ILOCK_EXCL); @@ -512,8 +518,11 @@ xfs_setattr( timeflags |= XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG; if (vap->va_size > ip->i_size) { - xfs_igrow_finish(tp, ip, vap->va_size, - !(flags & ATTR_DMI)); + ip->i_d.di_size = vap->va_size; + ip->i_size = vap->va_size; + if (!(flags & ATTR_DMI)) + xfs_ichgtime(ip, XFS_ICHGTIME_CHG); + xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); } else if ((vap->va_size <= ip->i_size) || ((vap->va_size == 0) && ip->i_d.di_nextents)) { /* -- cgit v1.2.3 From e48ad3160e5c5f5b952c7a7ed814f6f289a60100 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 11:30:52 +1000 Subject: [XFS] merge xfs_unmount into xfs_fs_put_super / xfs_fs_fill_super xfs_unmount is small and already pretty Linux specific, so merge it into the callers. The real unmount path is simplified a little by doing a WARN_ON on the xfs_unmount_flush retval directly instead of propagating the error back to the caller, and the mout failure case in simplified significantly by removing the forced shutdown case and all the dmapi events that shouldn't be sent because the dmapi mount event hasn't been sent by that time either. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31188a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 71 ++++++++++++++++++++++++++++++++++-- fs/xfs/xfs_vfsops.c | 87 -------------------------------------------- fs/xfs/xfs_vfsops.h | 1 - 3 files changed, 67 insertions(+), 92 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index a3ecdf442465..28132e643953 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1087,14 +1087,61 @@ xfs_fs_put_super( struct super_block *sb) { struct xfs_mount *mp = XFS_M(sb); + struct xfs_inode *rip = mp->m_rootip; + int unmount_event_flags = 0; int error; kthread_stop(mp->m_sync_task); xfs_sync(mp, SYNC_ATTR | SYNC_DELWRI); - error = xfs_unmount(mp, 0, NULL); - if (error) - printk("XFS: unmount got error=%d\n", error); + +#ifdef HAVE_DMAPI + if (mp->m_flags & XFS_MOUNT_DMAPI) { + unmount_event_flags = + (mp->m_dmevmask & (1 << DM_EVENT_UNMOUNT)) ? + 0 : DM_FLAGS_UNWANTED; + /* + * Ignore error from dmapi here, first unmount is not allowed + * to fail anyway, and second we wouldn't want to fail a + * unmount because of dmapi. + */ + XFS_SEND_PREUNMOUNT(mp, rip, DM_RIGHT_NULL, rip, DM_RIGHT_NULL, + NULL, NULL, 0, 0, unmount_event_flags); + } +#endif + + /* + * Blow away any referenced inode in the filestreams cache. + * This can and will cause log traffic as inodes go inactive + * here. + */ + xfs_filestream_unmount(mp); + + XFS_bflush(mp->m_ddev_targp); + error = xfs_unmount_flush(mp, 0); + WARN_ON(error); + + IRELE(rip); + + /* + * If we're forcing a shutdown, typically because of a media error, + * we want to make sure we invalidate dirty pages that belong to + * referenced vnodes as well. + */ + if (XFS_FORCED_SHUTDOWN(mp)) { + error = xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE); + ASSERT(error != EFSCORRUPTED); + } + + if (mp->m_flags & XFS_MOUNT_DMAPI) { + XFS_SEND_UNMOUNT(mp, rip, DM_RIGHT_NULL, 0, 0, + unmount_event_flags); + } + + xfs_unmountfs(mp, NULL); + xfs_qmops_put(mp); + xfs_dmops_put(mp); + kmem_free(mp); } STATIC void @@ -1400,7 +1447,23 @@ fail_vnrele: } fail_unmount: - xfs_unmount(mp, 0, NULL); + /* + * Blow away any referenced inode in the filestreams cache. + * This can and will cause log traffic as inodes go inactive + * here. + */ + xfs_filestream_unmount(mp); + + XFS_bflush(mp->m_ddev_targp); + error = xfs_unmount_flush(mp, 0); + WARN_ON(error); + + IRELE(mp->m_rootip); + + xfs_unmountfs(mp, NULL); + xfs_qmops_put(mp); + xfs_dmops_put(mp); + kmem_free(mp); fail_vfsop: kmem_free(args); diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c index e223aeab68be..bc34f90e7eea 100644 --- a/fs/xfs/xfs_vfsops.c +++ b/fs/xfs/xfs_vfsops.c @@ -558,93 +558,6 @@ error0: return error; } -int -xfs_unmount( - xfs_mount_t *mp, - int flags, - cred_t *credp) -{ - xfs_inode_t *rip; - bhv_vnode_t *rvp; - int unmount_event_wanted = 0; - int unmount_event_flags = 0; - int xfs_unmountfs_needed = 0; - int error; - - rip = mp->m_rootip; - rvp = XFS_ITOV(rip); - -#ifdef HAVE_DMAPI - if (mp->m_flags & XFS_MOUNT_DMAPI) { - error = XFS_SEND_PREUNMOUNT(mp, - rip, DM_RIGHT_NULL, rip, DM_RIGHT_NULL, - NULL, NULL, 0, 0, - (mp->m_dmevmask & (1<m_dmevmask & (1<m_ddev_targp); - error = xfs_unmount_flush(mp, 0); - if (error) - goto out; - - ASSERT(vn_count(rvp) == 1); - - /* - * Drop the reference count - */ - IRELE(rip); - - /* - * If we're forcing a shutdown, typically because of a media error, - * we want to make sure we invalidate dirty pages that belong to - * referenced vnodes as well. - */ - if (XFS_FORCED_SHUTDOWN(mp)) { - error = xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE); - ASSERT(error != EFSCORRUPTED); - } - xfs_unmountfs_needed = 1; - -out: - /* Send DMAPI event, if required. - * Then do xfs_unmountfs() if needed. - * Then return error (or zero). - */ - if (unmount_event_wanted) { - /* Note: mp structure must still exist for - * XFS_SEND_UNMOUNT() call. - */ - XFS_SEND_UNMOUNT(mp, error == 0 ? rip : NULL, - DM_RIGHT_NULL, 0, error, unmount_event_flags); - } - if (xfs_unmountfs_needed) { - /* - * Call common unmount function to flush to disk - * and free the super block buffer & mount structures. - */ - xfs_unmountfs(mp, credp); - xfs_qmops_put(mp); - xfs_dmops_put(mp); - kmem_free(mp); - } - - return XFS_ERROR(error); -} - STATIC void xfs_quiesce_fs( xfs_mount_t *mp) diff --git a/fs/xfs/xfs_vfsops.h b/fs/xfs/xfs_vfsops.h index 995091f19499..de64bb6542df 100644 --- a/fs/xfs/xfs_vfsops.h +++ b/fs/xfs/xfs_vfsops.h @@ -10,7 +10,6 @@ struct xfs_mount_args; int xfs_mount(struct xfs_mount *mp, struct xfs_mount_args *args, struct cred *credp); -int xfs_unmount(struct xfs_mount *mp, int flags, struct cred *credp); int xfs_sync(struct xfs_mount *mp, int flags); void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname, int lnnum); -- cgit v1.2.3 From f8f15e42b408edce6ca9e9d8bd0d0e2078a39efd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 11:30:59 +1000 Subject: [XFS] merge xfs_mount into xfs_fs_fill_super xfs_mount is already pretty linux-specific so merge it into xfs_fs_fill_super to allow for a more structured mount code in the next patches. xfs_start_flags and xfs_finish_flags also move to xfs_super.c. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31189a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 360 ++++++++++++++++++++++++++++++++++++++++- fs/xfs/xfs_vfsops.c | 369 ------------------------------------------- fs/xfs/xfs_vfsops.h | 2 - 3 files changed, 355 insertions(+), 376 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 28132e643953..4b6ddf88d44e 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1366,6 +1366,235 @@ xfs_fs_setxquota( Q_XSETPQLIM), id, (caddr_t)fdq); } +/* + * This function fills in xfs_mount_t fields based on mount args. + * Note: the superblock has _not_ yet been read in. + */ +STATIC int +xfs_start_flags( + struct xfs_mount_args *ap, + struct xfs_mount *mp) +{ + /* Values are in BBs */ + if ((ap->flags & XFSMNT_NOALIGN) != XFSMNT_NOALIGN) { + /* + * At this point the superblock has not been read + * in, therefore we do not know the block size. + * Before the mount call ends we will convert + * these to FSBs. + */ + mp->m_dalign = ap->sunit; + mp->m_swidth = ap->swidth; + } + + if (ap->logbufs != -1 && + ap->logbufs != 0 && + (ap->logbufs < XLOG_MIN_ICLOGS || + ap->logbufs > XLOG_MAX_ICLOGS)) { + cmn_err(CE_WARN, + "XFS: invalid logbufs value: %d [not %d-%d]", + ap->logbufs, XLOG_MIN_ICLOGS, XLOG_MAX_ICLOGS); + return XFS_ERROR(EINVAL); + } + mp->m_logbufs = ap->logbufs; + if (ap->logbufsize != -1 && + ap->logbufsize != 0 && + (ap->logbufsize < XLOG_MIN_RECORD_BSIZE || + ap->logbufsize > XLOG_MAX_RECORD_BSIZE || + !is_power_of_2(ap->logbufsize))) { + cmn_err(CE_WARN, + "XFS: invalid logbufsize: %d [not 16k,32k,64k,128k or 256k]", + ap->logbufsize); + return XFS_ERROR(EINVAL); + } + mp->m_logbsize = ap->logbufsize; + mp->m_fsname_len = strlen(ap->fsname) + 1; + mp->m_fsname = kmem_alloc(mp->m_fsname_len, KM_SLEEP); + strcpy(mp->m_fsname, ap->fsname); + if (ap->rtname[0]) { + mp->m_rtname = kmem_alloc(strlen(ap->rtname) + 1, KM_SLEEP); + strcpy(mp->m_rtname, ap->rtname); + } + if (ap->logname[0]) { + mp->m_logname = kmem_alloc(strlen(ap->logname) + 1, KM_SLEEP); + strcpy(mp->m_logname, ap->logname); + } + + if (ap->flags & XFSMNT_WSYNC) + mp->m_flags |= XFS_MOUNT_WSYNC; +#if XFS_BIG_INUMS + if (ap->flags & XFSMNT_INO64) { + mp->m_flags |= XFS_MOUNT_INO64; + mp->m_inoadd = XFS_INO64_OFFSET; + } +#endif + if (ap->flags & XFSMNT_RETERR) + mp->m_flags |= XFS_MOUNT_RETERR; + if (ap->flags & XFSMNT_NOALIGN) + mp->m_flags |= XFS_MOUNT_NOALIGN; + if (ap->flags & XFSMNT_SWALLOC) + mp->m_flags |= XFS_MOUNT_SWALLOC; + if (ap->flags & XFSMNT_OSYNCISOSYNC) + mp->m_flags |= XFS_MOUNT_OSYNCISOSYNC; + if (ap->flags & XFSMNT_32BITINODES) + mp->m_flags |= XFS_MOUNT_32BITINODES; + + if (ap->flags & XFSMNT_IOSIZE) { + if (ap->iosizelog > XFS_MAX_IO_LOG || + ap->iosizelog < XFS_MIN_IO_LOG) { + cmn_err(CE_WARN, + "XFS: invalid log iosize: %d [not %d-%d]", + ap->iosizelog, XFS_MIN_IO_LOG, + XFS_MAX_IO_LOG); + return XFS_ERROR(EINVAL); + } + + mp->m_flags |= XFS_MOUNT_DFLT_IOSIZE; + mp->m_readio_log = mp->m_writeio_log = ap->iosizelog; + } + + if (ap->flags & XFSMNT_IKEEP) + mp->m_flags |= XFS_MOUNT_IKEEP; + if (ap->flags & XFSMNT_DIRSYNC) + mp->m_flags |= XFS_MOUNT_DIRSYNC; + if (ap->flags & XFSMNT_ATTR2) + mp->m_flags |= XFS_MOUNT_ATTR2; + if (ap->flags & XFSMNT_NOATTR2) + mp->m_flags |= XFS_MOUNT_NOATTR2; + + if (ap->flags2 & XFSMNT2_COMPAT_IOSIZE) + mp->m_flags |= XFS_MOUNT_COMPAT_IOSIZE; + + /* + * no recovery flag requires a read-only mount + */ + if (ap->flags & XFSMNT_NORECOVERY) { + if (!(mp->m_flags & XFS_MOUNT_RDONLY)) { + cmn_err(CE_WARN, + "XFS: tried to mount a FS read-write without recovery!"); + return XFS_ERROR(EINVAL); + } + mp->m_flags |= XFS_MOUNT_NORECOVERY; + } + + if (ap->flags & XFSMNT_NOUUID) + mp->m_flags |= XFS_MOUNT_NOUUID; + if (ap->flags & XFSMNT_BARRIER) + mp->m_flags |= XFS_MOUNT_BARRIER; + else + mp->m_flags &= ~XFS_MOUNT_BARRIER; + + if (ap->flags2 & XFSMNT2_FILESTREAMS) + mp->m_flags |= XFS_MOUNT_FILESTREAMS; + + if (ap->flags & XFSMNT_DMAPI) + mp->m_flags |= XFS_MOUNT_DMAPI; + return 0; +} + +/* + * This function fills in xfs_mount_t fields based on mount args. + * Note: the superblock _has_ now been read in. + */ +STATIC int +xfs_finish_flags( + struct xfs_mount_args *ap, + struct xfs_mount *mp) +{ + int ronly = (mp->m_flags & XFS_MOUNT_RDONLY); + + /* Fail a mount where the logbuf is smaller then the log stripe */ + if (xfs_sb_version_haslogv2(&mp->m_sb)) { + if ((ap->logbufsize <= 0) && + (mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE)) { + mp->m_logbsize = mp->m_sb.sb_logsunit; + } else if (ap->logbufsize > 0 && + ap->logbufsize < mp->m_sb.sb_logsunit) { + cmn_err(CE_WARN, + "XFS: logbuf size must be greater than or equal to log stripe size"); + return XFS_ERROR(EINVAL); + } + } else { + /* Fail a mount if the logbuf is larger than 32K */ + if (ap->logbufsize > XLOG_BIG_RECORD_BSIZE) { + cmn_err(CE_WARN, + "XFS: logbuf size for version 1 logs must be 16K or 32K"); + return XFS_ERROR(EINVAL); + } + } + + /* + * mkfs'ed attr2 will turn on attr2 mount unless explicitly + * told by noattr2 to turn it off + */ + if (xfs_sb_version_hasattr2(&mp->m_sb) && + !(ap->flags & XFSMNT_NOATTR2)) + mp->m_flags |= XFS_MOUNT_ATTR2; + + /* + * prohibit r/w mounts of read-only filesystems + */ + if ((mp->m_sb.sb_flags & XFS_SBF_READONLY) && !ronly) { + cmn_err(CE_WARN, + "XFS: cannot mount a read-only filesystem as read-write"); + return XFS_ERROR(EROFS); + } + + /* + * check for shared mount. + */ + if (ap->flags & XFSMNT_SHARED) { + if (!xfs_sb_version_hasshared(&mp->m_sb)) + return XFS_ERROR(EINVAL); + + /* + * For IRIX 6.5, shared mounts must have the shared + * version bit set, have the persistent readonly + * field set, must be version 0 and can only be mounted + * read-only. + */ + if (!ronly || !(mp->m_sb.sb_flags & XFS_SBF_READONLY) || + (mp->m_sb.sb_shared_vn != 0)) + return XFS_ERROR(EINVAL); + + mp->m_flags |= XFS_MOUNT_SHARED; + + /* + * Shared XFS V0 can't deal with DMI. Return EINVAL. + */ + if (mp->m_sb.sb_shared_vn == 0 && (ap->flags & XFSMNT_DMAPI)) + return XFS_ERROR(EINVAL); + } + + if (ap->flags & XFSMNT_UQUOTA) { + mp->m_qflags |= (XFS_UQUOTA_ACCT | XFS_UQUOTA_ACTIVE); + if (ap->flags & XFSMNT_UQUOTAENF) + mp->m_qflags |= XFS_UQUOTA_ENFD; + } + + if (ap->flags & XFSMNT_GQUOTA) { + mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE); + if (ap->flags & XFSMNT_GQUOTAENF) + mp->m_qflags |= XFS_OQUOTA_ENFD; + } else if (ap->flags & XFSMNT_PQUOTA) { + mp->m_qflags |= (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE); + if (ap->flags & XFSMNT_PQUOTAENF) + mp->m_qflags |= XFS_OQUOTA_ENFD; + } + + return 0; +} + +/* + * The file system configurations are: + * (1) device (partition) with data and internal log + * (2) logical volume with data and log subvolumes. + * (3) logical volume with data, log, and realtime subvolumes. + * + * We only have to handle opening the log and realtime volumes here if + * they are present. The data subvolume has already been opened by + * get_sb_bdev() and is stored in vfsp->vfs_super->s_bdev. + */ STATIC int xfs_fs_fill_super( struct super_block *sb, @@ -1375,7 +1604,9 @@ xfs_fs_fill_super( struct inode *root; struct xfs_mount *mp = NULL; struct xfs_mount_args *args = xfs_args_allocate(sb, silent); - int error; + struct block_device *ddev = sb->s_bdev; + struct block_device *logdev = NULL, *rtdev = NULL; + int flags = 0, error; mp = xfs_mount_init(); @@ -1398,10 +1629,114 @@ xfs_fs_fill_super( sb->s_qcop = &xfs_quotactl_operations; sb->s_op = &xfs_super_operations; - error = xfs_mount(mp, args, NULL); + error = xfs_dmops_get(mp, args); + if (error) + goto fail_vfsop; + error = xfs_qmops_get(mp, args); if (error) goto fail_vfsop; + if (args->flags & XFSMNT_QUIET) + flags |= XFS_MFSI_QUIET; + + /* + * Open real time and log devices - order is important. + */ + if (args->logname[0]) { + error = xfs_blkdev_get(mp, args->logname, &logdev); + if (error) + goto fail_vfsop; + } + if (args->rtname[0]) { + error = xfs_blkdev_get(mp, args->rtname, &rtdev); + if (error) { + xfs_blkdev_put(logdev); + goto fail_vfsop; + } + + if (rtdev == ddev || rtdev == logdev) { + cmn_err(CE_WARN, + "XFS: Cannot mount filesystem with identical rtdev and ddev/logdev."); + xfs_blkdev_put(logdev); + xfs_blkdev_put(rtdev); + error = EINVAL; + goto fail_vfsop; + } + } + + /* + * Setup xfs_mount buffer target pointers + */ + error = ENOMEM; + mp->m_ddev_targp = xfs_alloc_buftarg(ddev, 0); + if (!mp->m_ddev_targp) { + xfs_blkdev_put(logdev); + xfs_blkdev_put(rtdev); + goto fail_vfsop; + } + if (rtdev) { + mp->m_rtdev_targp = xfs_alloc_buftarg(rtdev, 1); + if (!mp->m_rtdev_targp) { + xfs_blkdev_put(logdev); + xfs_blkdev_put(rtdev); + goto error0; + } + } + mp->m_logdev_targp = (logdev && logdev != ddev) ? + xfs_alloc_buftarg(logdev, 1) : mp->m_ddev_targp; + if (!mp->m_logdev_targp) { + xfs_blkdev_put(logdev); + xfs_blkdev_put(rtdev); + goto error0; + } + + /* + * Setup flags based on mount(2) options and then the superblock + */ + error = xfs_start_flags(args, mp); + if (error) + goto error1; + error = xfs_readsb(mp, flags); + if (error) + goto error1; + error = xfs_finish_flags(args, mp); + if (error) + goto error2; + + /* + * Setup xfs_mount buffer target pointers based on superblock + */ + error = xfs_setsize_buftarg(mp->m_ddev_targp, mp->m_sb.sb_blocksize, + mp->m_sb.sb_sectsize); + if (!error && logdev && logdev != ddev) { + unsigned int log_sector_size = BBSIZE; + + if (xfs_sb_version_hassector(&mp->m_sb)) + log_sector_size = mp->m_sb.sb_logsectsize; + error = xfs_setsize_buftarg(mp->m_logdev_targp, + mp->m_sb.sb_blocksize, + log_sector_size); + } + if (!error && rtdev) + error = xfs_setsize_buftarg(mp->m_rtdev_targp, + mp->m_sb.sb_blocksize, + mp->m_sb.sb_sectsize); + if (error) + goto error2; + + if (mp->m_flags & XFS_MOUNT_BARRIER) + xfs_mountfs_check_barriers(mp); + + error = xfs_filestream_mount(mp); + if (error) + goto error2; + + error = xfs_mountfs(mp, flags); + if (error) + goto error2; + + XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, args->mtpt, args->fsname); + sb->s_dirt = 1; sb->s_magic = XFS_SB_MAGIC; sb->s_blocksize = mp->m_sb.sb_blocksize; @@ -1438,7 +1773,22 @@ xfs_fs_fill_super( kmem_free(args); return 0; -fail_vnrele: + error2: + if (mp->m_sb_bp) + xfs_freesb(mp); + error1: + xfs_binval(mp->m_ddev_targp); + if (logdev && logdev != ddev) + xfs_binval(mp->m_logdev_targp); + if (rtdev) + xfs_binval(mp->m_rtdev_targp); + error0: + xfs_unmountfs_close(mp, NULL); + xfs_qmops_put(mp); + xfs_dmops_put(mp); + goto fail_vfsop; + + fail_vnrele: if (sb->s_root) { dput(sb->s_root); sb->s_root = NULL; @@ -1446,7 +1796,7 @@ fail_vnrele: iput(root); } -fail_unmount: + fail_unmount: /* * Blow away any referenced inode in the filestreams cache. * This can and will cause log traffic as inodes go inactive @@ -1465,7 +1815,7 @@ fail_unmount: xfs_dmops_put(mp); kmem_free(mp); -fail_vfsop: + fail_vfsop: kmem_free(args); return -error; } diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c index bc34f90e7eea..8b5a3376c2f7 100644 --- a/fs/xfs/xfs_vfsops.c +++ b/fs/xfs/xfs_vfsops.c @@ -189,375 +189,6 @@ xfs_cleanup(void) kmem_zone_destroy(xfs_log_ticket_zone); } -/* - * xfs_start_flags - * - * This function fills in xfs_mount_t fields based on mount args. - * Note: the superblock has _not_ yet been read in. - */ -STATIC int -xfs_start_flags( - struct xfs_mount_args *ap, - struct xfs_mount *mp) -{ - /* Values are in BBs */ - if ((ap->flags & XFSMNT_NOALIGN) != XFSMNT_NOALIGN) { - /* - * At this point the superblock has not been read - * in, therefore we do not know the block size. - * Before the mount call ends we will convert - * these to FSBs. - */ - mp->m_dalign = ap->sunit; - mp->m_swidth = ap->swidth; - } - - if (ap->logbufs != -1 && - ap->logbufs != 0 && - (ap->logbufs < XLOG_MIN_ICLOGS || - ap->logbufs > XLOG_MAX_ICLOGS)) { - cmn_err(CE_WARN, - "XFS: invalid logbufs value: %d [not %d-%d]", - ap->logbufs, XLOG_MIN_ICLOGS, XLOG_MAX_ICLOGS); - return XFS_ERROR(EINVAL); - } - mp->m_logbufs = ap->logbufs; - if (ap->logbufsize != -1 && - ap->logbufsize != 0 && - (ap->logbufsize < XLOG_MIN_RECORD_BSIZE || - ap->logbufsize > XLOG_MAX_RECORD_BSIZE || - !is_power_of_2(ap->logbufsize))) { - cmn_err(CE_WARN, - "XFS: invalid logbufsize: %d [not 16k,32k,64k,128k or 256k]", - ap->logbufsize); - return XFS_ERROR(EINVAL); - } - mp->m_logbsize = ap->logbufsize; - mp->m_fsname_len = strlen(ap->fsname) + 1; - mp->m_fsname = kmem_alloc(mp->m_fsname_len, KM_SLEEP); - strcpy(mp->m_fsname, ap->fsname); - if (ap->rtname[0]) { - mp->m_rtname = kmem_alloc(strlen(ap->rtname) + 1, KM_SLEEP); - strcpy(mp->m_rtname, ap->rtname); - } - if (ap->logname[0]) { - mp->m_logname = kmem_alloc(strlen(ap->logname) + 1, KM_SLEEP); - strcpy(mp->m_logname, ap->logname); - } - - if (ap->flags & XFSMNT_WSYNC) - mp->m_flags |= XFS_MOUNT_WSYNC; -#if XFS_BIG_INUMS - if (ap->flags & XFSMNT_INO64) { - mp->m_flags |= XFS_MOUNT_INO64; - mp->m_inoadd = XFS_INO64_OFFSET; - } -#endif - if (ap->flags & XFSMNT_RETERR) - mp->m_flags |= XFS_MOUNT_RETERR; - if (ap->flags & XFSMNT_NOALIGN) - mp->m_flags |= XFS_MOUNT_NOALIGN; - if (ap->flags & XFSMNT_SWALLOC) - mp->m_flags |= XFS_MOUNT_SWALLOC; - if (ap->flags & XFSMNT_OSYNCISOSYNC) - mp->m_flags |= XFS_MOUNT_OSYNCISOSYNC; - if (ap->flags & XFSMNT_32BITINODES) - mp->m_flags |= XFS_MOUNT_32BITINODES; - - if (ap->flags & XFSMNT_IOSIZE) { - if (ap->iosizelog > XFS_MAX_IO_LOG || - ap->iosizelog < XFS_MIN_IO_LOG) { - cmn_err(CE_WARN, - "XFS: invalid log iosize: %d [not %d-%d]", - ap->iosizelog, XFS_MIN_IO_LOG, - XFS_MAX_IO_LOG); - return XFS_ERROR(EINVAL); - } - - mp->m_flags |= XFS_MOUNT_DFLT_IOSIZE; - mp->m_readio_log = mp->m_writeio_log = ap->iosizelog; - } - - if (ap->flags & XFSMNT_IKEEP) - mp->m_flags |= XFS_MOUNT_IKEEP; - if (ap->flags & XFSMNT_DIRSYNC) - mp->m_flags |= XFS_MOUNT_DIRSYNC; - if (ap->flags & XFSMNT_ATTR2) - mp->m_flags |= XFS_MOUNT_ATTR2; - if (ap->flags & XFSMNT_NOATTR2) - mp->m_flags |= XFS_MOUNT_NOATTR2; - - if (ap->flags2 & XFSMNT2_COMPAT_IOSIZE) - mp->m_flags |= XFS_MOUNT_COMPAT_IOSIZE; - - /* - * no recovery flag requires a read-only mount - */ - if (ap->flags & XFSMNT_NORECOVERY) { - if (!(mp->m_flags & XFS_MOUNT_RDONLY)) { - cmn_err(CE_WARN, - "XFS: tried to mount a FS read-write without recovery!"); - return XFS_ERROR(EINVAL); - } - mp->m_flags |= XFS_MOUNT_NORECOVERY; - } - - if (ap->flags & XFSMNT_NOUUID) - mp->m_flags |= XFS_MOUNT_NOUUID; - if (ap->flags & XFSMNT_BARRIER) - mp->m_flags |= XFS_MOUNT_BARRIER; - else - mp->m_flags &= ~XFS_MOUNT_BARRIER; - - if (ap->flags2 & XFSMNT2_FILESTREAMS) - mp->m_flags |= XFS_MOUNT_FILESTREAMS; - - if (ap->flags & XFSMNT_DMAPI) - mp->m_flags |= XFS_MOUNT_DMAPI; - return 0; -} - -/* - * This function fills in xfs_mount_t fields based on mount args. - * Note: the superblock _has_ now been read in. - */ -STATIC int -xfs_finish_flags( - struct xfs_mount_args *ap, - struct xfs_mount *mp) -{ - int ronly = (mp->m_flags & XFS_MOUNT_RDONLY); - - /* Fail a mount where the logbuf is smaller then the log stripe */ - if (xfs_sb_version_haslogv2(&mp->m_sb)) { - if ((ap->logbufsize <= 0) && - (mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE)) { - mp->m_logbsize = mp->m_sb.sb_logsunit; - } else if (ap->logbufsize > 0 && - ap->logbufsize < mp->m_sb.sb_logsunit) { - cmn_err(CE_WARN, - "XFS: logbuf size must be greater than or equal to log stripe size"); - return XFS_ERROR(EINVAL); - } - } else { - /* Fail a mount if the logbuf is larger than 32K */ - if (ap->logbufsize > XLOG_BIG_RECORD_BSIZE) { - cmn_err(CE_WARN, - "XFS: logbuf size for version 1 logs must be 16K or 32K"); - return XFS_ERROR(EINVAL); - } - } - - /* - * mkfs'ed attr2 will turn on attr2 mount unless explicitly - * told by noattr2 to turn it off - */ - if (xfs_sb_version_hasattr2(&mp->m_sb) && - !(ap->flags & XFSMNT_NOATTR2)) - mp->m_flags |= XFS_MOUNT_ATTR2; - - /* - * prohibit r/w mounts of read-only filesystems - */ - if ((mp->m_sb.sb_flags & XFS_SBF_READONLY) && !ronly) { - cmn_err(CE_WARN, - "XFS: cannot mount a read-only filesystem as read-write"); - return XFS_ERROR(EROFS); - } - - /* - * check for shared mount. - */ - if (ap->flags & XFSMNT_SHARED) { - if (!xfs_sb_version_hasshared(&mp->m_sb)) - return XFS_ERROR(EINVAL); - - /* - * For IRIX 6.5, shared mounts must have the shared - * version bit set, have the persistent readonly - * field set, must be version 0 and can only be mounted - * read-only. - */ - if (!ronly || !(mp->m_sb.sb_flags & XFS_SBF_READONLY) || - (mp->m_sb.sb_shared_vn != 0)) - return XFS_ERROR(EINVAL); - - mp->m_flags |= XFS_MOUNT_SHARED; - - /* - * Shared XFS V0 can't deal with DMI. Return EINVAL. - */ - if (mp->m_sb.sb_shared_vn == 0 && (ap->flags & XFSMNT_DMAPI)) - return XFS_ERROR(EINVAL); - } - - if (ap->flags & XFSMNT_UQUOTA) { - mp->m_qflags |= (XFS_UQUOTA_ACCT | XFS_UQUOTA_ACTIVE); - if (ap->flags & XFSMNT_UQUOTAENF) - mp->m_qflags |= XFS_UQUOTA_ENFD; - } - - if (ap->flags & XFSMNT_GQUOTA) { - mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE); - if (ap->flags & XFSMNT_GQUOTAENF) - mp->m_qflags |= XFS_OQUOTA_ENFD; - } else if (ap->flags & XFSMNT_PQUOTA) { - mp->m_qflags |= (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE); - if (ap->flags & XFSMNT_PQUOTAENF) - mp->m_qflags |= XFS_OQUOTA_ENFD; - } - - return 0; -} - -/* - * xfs_mount - * - * The file system configurations are: - * (1) device (partition) with data and internal log - * (2) logical volume with data and log subvolumes. - * (3) logical volume with data, log, and realtime subvolumes. - * - * We only have to handle opening the log and realtime volumes here if - * they are present. The data subvolume has already been opened by - * get_sb_bdev() and is stored in vfsp->vfs_super->s_bdev. - */ -int -xfs_mount( - struct xfs_mount *mp, - struct xfs_mount_args *args, - cred_t *credp) -{ - struct block_device *ddev, *logdev, *rtdev; - int flags = 0, error; - - ddev = mp->m_super->s_bdev; - logdev = rtdev = NULL; - - error = xfs_dmops_get(mp, args); - if (error) - return error; - error = xfs_qmops_get(mp, args); - if (error) - return error; - - if (args->flags & XFSMNT_QUIET) - flags |= XFS_MFSI_QUIET; - - /* - * Open real time and log devices - order is important. - */ - if (args->logname[0]) { - error = xfs_blkdev_get(mp, args->logname, &logdev); - if (error) - return error; - } - if (args->rtname[0]) { - error = xfs_blkdev_get(mp, args->rtname, &rtdev); - if (error) { - xfs_blkdev_put(logdev); - return error; - } - - if (rtdev == ddev || rtdev == logdev) { - cmn_err(CE_WARN, - "XFS: Cannot mount filesystem with identical rtdev and ddev/logdev."); - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - return EINVAL; - } - } - - /* - * Setup xfs_mount buffer target pointers - */ - error = ENOMEM; - mp->m_ddev_targp = xfs_alloc_buftarg(ddev, 0); - if (!mp->m_ddev_targp) { - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - return error; - } - if (rtdev) { - mp->m_rtdev_targp = xfs_alloc_buftarg(rtdev, 1); - if (!mp->m_rtdev_targp) { - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - goto error0; - } - } - mp->m_logdev_targp = (logdev && logdev != ddev) ? - xfs_alloc_buftarg(logdev, 1) : mp->m_ddev_targp; - if (!mp->m_logdev_targp) { - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - goto error0; - } - - /* - * Setup flags based on mount(2) options and then the superblock - */ - error = xfs_start_flags(args, mp); - if (error) - goto error1; - error = xfs_readsb(mp, flags); - if (error) - goto error1; - error = xfs_finish_flags(args, mp); - if (error) - goto error2; - - /* - * Setup xfs_mount buffer target pointers based on superblock - */ - error = xfs_setsize_buftarg(mp->m_ddev_targp, mp->m_sb.sb_blocksize, - mp->m_sb.sb_sectsize); - if (!error && logdev && logdev != ddev) { - unsigned int log_sector_size = BBSIZE; - - if (xfs_sb_version_hassector(&mp->m_sb)) - log_sector_size = mp->m_sb.sb_logsectsize; - error = xfs_setsize_buftarg(mp->m_logdev_targp, - mp->m_sb.sb_blocksize, - log_sector_size); - } - if (!error && rtdev) - error = xfs_setsize_buftarg(mp->m_rtdev_targp, - mp->m_sb.sb_blocksize, - mp->m_sb.sb_sectsize); - if (error) - goto error2; - - if (mp->m_flags & XFS_MOUNT_BARRIER) - xfs_mountfs_check_barriers(mp); - - if ((error = xfs_filestream_mount(mp))) - goto error2; - - error = xfs_mountfs(mp, flags); - if (error) - goto error2; - - XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, args->mtpt, args->fsname); - - return 0; - -error2: - if (mp->m_sb_bp) - xfs_freesb(mp); -error1: - xfs_binval(mp->m_ddev_targp); - if (logdev && logdev != ddev) - xfs_binval(mp->m_logdev_targp); - if (rtdev) - xfs_binval(mp->m_rtdev_targp); -error0: - xfs_unmountfs_close(mp, credp); - xfs_qmops_put(mp); - xfs_dmops_put(mp); - return error; -} - STATIC void xfs_quiesce_fs( xfs_mount_t *mp) diff --git a/fs/xfs/xfs_vfsops.h b/fs/xfs/xfs_vfsops.h index de64bb6542df..a74b05087da4 100644 --- a/fs/xfs/xfs_vfsops.h +++ b/fs/xfs/xfs_vfsops.h @@ -8,8 +8,6 @@ struct kstatfs; struct xfs_mount; struct xfs_mount_args; -int xfs_mount(struct xfs_mount *mp, struct xfs_mount_args *args, - struct cred *credp); int xfs_sync(struct xfs_mount *mp, int flags); void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname, int lnnum); -- cgit v1.2.3 From af15b8953a60d336aade96a2c162abffdba75ec9 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 11:31:05 +1000 Subject: [XFS] don't call xfs_freesb from xfs_mountfs failure case Freeing of the superblock is already handled in the caller, and that is more symmetric with the mount path, too. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31192a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_mount.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index fca3f8af6746..ee5df5fae829 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -1268,7 +1268,6 @@ xfs_mountfs( error1: if (uuid_mounted) uuid_table_remove(&mp->m_sb.sb_uuid); - xfs_freesb(mp); return error; } -- cgit v1.2.3 From 19f354d4c3f4c48bf6b2a86227d8e3050e5f7d50 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 11:31:13 +1000 Subject: [XFS] sort out opening and closing of the block devices Currently closing the rt/log block device is done in the wrong spot, and far too early. So revampt it: - xfs_blkdev_put moved out of xfs_free_buftarg into the caller so that it is done after tearing down the buftarg completely. - call to xfs_unmountfs_close moved from xfs_mountfs into caller so that it's done after tearing down the filesystem completely. - xfs_unmountfs_close is renamed to xfs_close_devices and made static in xfs_super.c - opening of the block devices is split into a helper xfs_open_devices that is symetric in use to xfs_close_devices - xfs_unmountfs can now lose struct cred - error handling around device opening sanitized in xfs_fs_fill_super SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31193a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_buf.c | 5 +- fs/xfs/linux-2.6/xfs_buf.h | 2 +- fs/xfs/linux-2.6/xfs_super.c | 192 +++++++++++++++++++++++++++---------------- fs/xfs/linux-2.6/xfs_super.h | 3 - fs/xfs/xfs_mount.c | 13 +-- fs/xfs/xfs_mount.h | 3 +- 6 files changed, 123 insertions(+), 95 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c index ed03c6d3c9c1..9cc8f0213095 100644 --- a/fs/xfs/linux-2.6/xfs_buf.c +++ b/fs/xfs/linux-2.6/xfs_buf.c @@ -1427,13 +1427,10 @@ xfs_unregister_buftarg( void xfs_free_buftarg( - xfs_buftarg_t *btp, - int external) + xfs_buftarg_t *btp) { xfs_flush_buftarg(btp, 1); xfs_blkdev_issue_flush(btp); - if (external) - xfs_blkdev_put(btp->bt_bdev); xfs_free_bufhash(btp); iput(btp->bt_mapping->host); diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h index f948ec7ba9a4..29d1d4adc078 100644 --- a/fs/xfs/linux-2.6/xfs_buf.h +++ b/fs/xfs/linux-2.6/xfs_buf.h @@ -429,7 +429,7 @@ static inline void xfs_bdwrite(void *mp, xfs_buf_t *bp) * Handling of buftargs. */ extern xfs_buftarg_t *xfs_alloc_buftarg(struct block_device *, int); -extern void xfs_free_buftarg(xfs_buftarg_t *, int); +extern void xfs_free_buftarg(xfs_buftarg_t *); extern void xfs_wait_buftarg(xfs_buftarg_t *); extern int xfs_setsize_buftarg(xfs_buftarg_t *, unsigned int, unsigned int); extern int xfs_flush_buftarg(xfs_buftarg_t *, int); diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 4b6ddf88d44e..055faa06ca22 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -766,6 +766,103 @@ xfs_blkdev_issue_flush( blkdev_issue_flush(buftarg->bt_bdev, NULL); } +STATIC void +xfs_close_devices( + struct xfs_mount *mp) +{ + if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) { + xfs_free_buftarg(mp->m_logdev_targp); + xfs_blkdev_put(mp->m_logdev_targp->bt_bdev); + } + if (mp->m_rtdev_targp) { + xfs_free_buftarg(mp->m_rtdev_targp); + xfs_blkdev_put(mp->m_rtdev_targp->bt_bdev); + } + xfs_free_buftarg(mp->m_ddev_targp); +} + +/* + * The file system configurations are: + * (1) device (partition) with data and internal log + * (2) logical volume with data and log subvolumes. + * (3) logical volume with data, log, and realtime subvolumes. + * + * We only have to handle opening the log and realtime volumes here if + * they are present. The data subvolume has already been opened by + * get_sb_bdev() and is stored in sb->s_bdev. + */ +STATIC int +xfs_open_devices( + struct xfs_mount *mp, + struct xfs_mount_args *args) +{ + struct block_device *ddev = mp->m_super->s_bdev; + struct block_device *logdev = NULL, *rtdev = NULL; + int error; + + /* + * Open real time and log devices - order is important. + */ + if (args->logname[0]) { + error = xfs_blkdev_get(mp, args->logname, &logdev); + if (error) + goto out; + } + + if (args->rtname[0]) { + error = xfs_blkdev_get(mp, args->rtname, &rtdev); + if (error) + goto out_close_logdev; + + if (rtdev == ddev || rtdev == logdev) { + cmn_err(CE_WARN, + "XFS: Cannot mount filesystem with identical rtdev and ddev/logdev."); + error = EINVAL; + goto out_close_rtdev; + } + } + + /* + * Setup xfs_mount buffer target pointers + */ + error = ENOMEM; + mp->m_ddev_targp = xfs_alloc_buftarg(ddev, 0); + if (!mp->m_ddev_targp) + goto out_close_rtdev; + + if (rtdev) { + mp->m_rtdev_targp = xfs_alloc_buftarg(rtdev, 1); + if (!mp->m_rtdev_targp) + goto out_free_ddev_targ; + } + + if (logdev && logdev != ddev) { + mp->m_logdev_targp = xfs_alloc_buftarg(logdev, 1); + if (!mp->m_logdev_targp) + goto out_free_rtdev_targ; + } else { + mp->m_logdev_targp = mp->m_ddev_targp; + } + + return 0; + + out_free_rtdev_targ: + if (mp->m_rtdev_targp) + xfs_free_buftarg(mp->m_rtdev_targp); + out_free_ddev_targ: + xfs_free_buftarg(mp->m_ddev_targp); + out_close_rtdev: + if (rtdev) + xfs_blkdev_put(rtdev); + out_close_logdev: + if (logdev && logdev != ddev) + xfs_blkdev_put(logdev); + out: + return error; +} + + + /* * XFS AIL push thread support */ @@ -1138,7 +1235,8 @@ xfs_fs_put_super( unmount_event_flags); } - xfs_unmountfs(mp, NULL); + xfs_unmountfs(mp); + xfs_close_devices(mp); xfs_qmops_put(mp); xfs_dmops_put(mp); kmem_free(mp); @@ -1585,16 +1683,6 @@ xfs_finish_flags( return 0; } -/* - * The file system configurations are: - * (1) device (partition) with data and internal log - * (2) logical volume with data and log subvolumes. - * (3) logical volume with data, log, and realtime subvolumes. - * - * We only have to handle opening the log and realtime volumes here if - * they are present. The data subvolume has already been opened by - * get_sb_bdev() and is stored in vfsp->vfs_super->s_bdev. - */ STATIC int xfs_fs_fill_super( struct super_block *sb, @@ -1604,8 +1692,6 @@ xfs_fs_fill_super( struct inode *root; struct xfs_mount *mp = NULL; struct xfs_mount_args *args = xfs_args_allocate(sb, silent); - struct block_device *ddev = sb->s_bdev; - struct block_device *logdev = NULL, *rtdev = NULL; int flags = 0, error; mp = xfs_mount_init(); @@ -1634,61 +1720,14 @@ xfs_fs_fill_super( goto fail_vfsop; error = xfs_qmops_get(mp, args); if (error) - goto fail_vfsop; + goto out_put_dmops; if (args->flags & XFSMNT_QUIET) flags |= XFS_MFSI_QUIET; - /* - * Open real time and log devices - order is important. - */ - if (args->logname[0]) { - error = xfs_blkdev_get(mp, args->logname, &logdev); - if (error) - goto fail_vfsop; - } - if (args->rtname[0]) { - error = xfs_blkdev_get(mp, args->rtname, &rtdev); - if (error) { - xfs_blkdev_put(logdev); - goto fail_vfsop; - } - - if (rtdev == ddev || rtdev == logdev) { - cmn_err(CE_WARN, - "XFS: Cannot mount filesystem with identical rtdev and ddev/logdev."); - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - error = EINVAL; - goto fail_vfsop; - } - } - - /* - * Setup xfs_mount buffer target pointers - */ - error = ENOMEM; - mp->m_ddev_targp = xfs_alloc_buftarg(ddev, 0); - if (!mp->m_ddev_targp) { - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - goto fail_vfsop; - } - if (rtdev) { - mp->m_rtdev_targp = xfs_alloc_buftarg(rtdev, 1); - if (!mp->m_rtdev_targp) { - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - goto error0; - } - } - mp->m_logdev_targp = (logdev && logdev != ddev) ? - xfs_alloc_buftarg(logdev, 1) : mp->m_ddev_targp; - if (!mp->m_logdev_targp) { - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - goto error0; - } + error = xfs_open_devices(mp, args); + if (error) + goto out_put_qmops; /* * Setup flags based on mount(2) options and then the superblock @@ -1708,7 +1747,9 @@ xfs_fs_fill_super( */ error = xfs_setsize_buftarg(mp->m_ddev_targp, mp->m_sb.sb_blocksize, mp->m_sb.sb_sectsize); - if (!error && logdev && logdev != ddev) { + if (error) + goto error2; + if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) { unsigned int log_sector_size = BBSIZE; if (xfs_sb_version_hassector(&mp->m_sb)) @@ -1716,13 +1757,16 @@ xfs_fs_fill_super( error = xfs_setsize_buftarg(mp->m_logdev_targp, mp->m_sb.sb_blocksize, log_sector_size); + if (error) + goto error2; } - if (!error && rtdev) + if (mp->m_rtdev_targp) { error = xfs_setsize_buftarg(mp->m_rtdev_targp, mp->m_sb.sb_blocksize, mp->m_sb.sb_sectsize); - if (error) - goto error2; + if (error) + goto error2; + } if (mp->m_flags & XFS_MOUNT_BARRIER) xfs_mountfs_check_barriers(mp); @@ -1778,13 +1822,14 @@ xfs_fs_fill_super( xfs_freesb(mp); error1: xfs_binval(mp->m_ddev_targp); - if (logdev && logdev != ddev) + if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) xfs_binval(mp->m_logdev_targp); - if (rtdev) + if (mp->m_rtdev_targp) xfs_binval(mp->m_rtdev_targp); - error0: - xfs_unmountfs_close(mp, NULL); + xfs_close_devices(mp); + out_put_qmops: xfs_qmops_put(mp); + out_put_dmops: xfs_dmops_put(mp); goto fail_vfsop; @@ -1810,7 +1855,8 @@ xfs_fs_fill_super( IRELE(mp->m_rootip); - xfs_unmountfs(mp, NULL); + xfs_unmountfs(mp); + xfs_close_devices(mp); xfs_qmops_put(mp); xfs_dmops_put(mp); kmem_free(mp); diff --git a/fs/xfs/linux-2.6/xfs_super.h b/fs/xfs/linux-2.6/xfs_super.h index 3efb7c6d3303..212bdc7a7897 100644 --- a/fs/xfs/linux-2.6/xfs_super.h +++ b/fs/xfs/linux-2.6/xfs_super.h @@ -107,9 +107,6 @@ extern void xfs_initialize_vnode(struct xfs_mount *mp, bhv_vnode_t *vp, extern void xfs_flush_inode(struct xfs_inode *); extern void xfs_flush_device(struct xfs_inode *); -extern int xfs_blkdev_get(struct xfs_mount *, const char *, - struct block_device **); -extern void xfs_blkdev_put(struct block_device *); extern void xfs_blkdev_issue_flush(struct xfs_buftarg *); extern const struct export_operations xfs_export_operations; diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index ee5df5fae829..c67f8a9ae418 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -1278,7 +1278,7 @@ xfs_mountfs( * log and makes sure that incore structures are freed. */ int -xfs_unmountfs(xfs_mount_t *mp, struct cred *cr) +xfs_unmountfs(xfs_mount_t *mp) { __uint64_t resblks; int error = 0; @@ -1345,7 +1345,6 @@ xfs_unmountfs(xfs_mount_t *mp, struct cred *cr) */ ASSERT(mp->m_inodes == NULL); - xfs_unmountfs_close(mp, cr); if ((mp->m_flags & XFS_MOUNT_NOUUID) == 0) uuid_table_remove(&mp->m_sb.sb_uuid); @@ -1356,16 +1355,6 @@ xfs_unmountfs(xfs_mount_t *mp, struct cred *cr) return 0; } -void -xfs_unmountfs_close(xfs_mount_t *mp, struct cred *cr) -{ - if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) - xfs_free_buftarg(mp->m_logdev_targp, 1); - if (mp->m_rtdev_targp) - xfs_free_buftarg(mp->m_rtdev_targp, 1); - xfs_free_buftarg(mp->m_ddev_targp, 0); -} - STATIC void xfs_unmountfs_wait(xfs_mount_t *mp) { diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index 4aff0c125ad3..5acde7fd9c0a 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -518,8 +518,7 @@ extern void xfs_mount_free(xfs_mount_t *mp); extern int xfs_mountfs(xfs_mount_t *mp, int); extern void xfs_mountfs_check_barriers(xfs_mount_t *mp); -extern int xfs_unmountfs(xfs_mount_t *, struct cred *); -extern void xfs_unmountfs_close(xfs_mount_t *, struct cred *); +extern int xfs_unmountfs(xfs_mount_t *); extern int xfs_unmountfs_writesb(xfs_mount_t *); extern int xfs_unmount_flush(xfs_mount_t *, int); extern int xfs_mod_incore_sb(xfs_mount_t *, xfs_sb_field_t, int64_t, int); -- cgit v1.2.3 From e34b562c6bbffc3c466251ffa1d2adaf163db566 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 15:10:36 +1000 Subject: [XFS] add xfs_setup_devices helper Split setting the block and sector size out of xfs_fs_fill_super into a small helper to make xfs_fs_fill_super more readable. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31194a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 58 ++++++++++++++++++++++++++------------------ 1 file changed, 35 insertions(+), 23 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 055faa06ca22..613370f9a4bd 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -861,7 +861,41 @@ xfs_open_devices( return error; } +/* + * Setup xfs_mount buffer target pointers based on superblock + */ +STATIC int +xfs_setup_devices( + struct xfs_mount *mp) +{ + int error; + error = xfs_setsize_buftarg(mp->m_ddev_targp, mp->m_sb.sb_blocksize, + mp->m_sb.sb_sectsize); + if (error) + return error; + + if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) { + unsigned int log_sector_size = BBSIZE; + + if (xfs_sb_version_hassector(&mp->m_sb)) + log_sector_size = mp->m_sb.sb_logsectsize; + error = xfs_setsize_buftarg(mp->m_logdev_targp, + mp->m_sb.sb_blocksize, + log_sector_size); + if (error) + return error; + } + if (mp->m_rtdev_targp) { + error = xfs_setsize_buftarg(mp->m_rtdev_targp, + mp->m_sb.sb_blocksize, + mp->m_sb.sb_sectsize); + if (error) + return error; + } + + return 0; +} /* * XFS AIL push thread support @@ -1742,31 +1776,9 @@ xfs_fs_fill_super( if (error) goto error2; - /* - * Setup xfs_mount buffer target pointers based on superblock - */ - error = xfs_setsize_buftarg(mp->m_ddev_targp, mp->m_sb.sb_blocksize, - mp->m_sb.sb_sectsize); + error = xfs_setup_devices(mp); if (error) goto error2; - if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) { - unsigned int log_sector_size = BBSIZE; - - if (xfs_sb_version_hassector(&mp->m_sb)) - log_sector_size = mp->m_sb.sb_logsectsize; - error = xfs_setsize_buftarg(mp->m_logdev_targp, - mp->m_sb.sb_blocksize, - log_sector_size); - if (error) - goto error2; - } - if (mp->m_rtdev_targp) { - error = xfs_setsize_buftarg(mp->m_rtdev_targp, - mp->m_sb.sb_blocksize, - mp->m_sb.sb_sectsize); - if (error) - goto error2; - } if (mp->m_flags & XFS_MOUNT_BARRIER) xfs_mountfs_check_barriers(mp); -- cgit v1.2.3 From bdd907bab78419f34113c51470192945741b839e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 15:10:44 +1000 Subject: [XFS] allow xfs_args_allocate to fail Switch xfs_args_allocate to kzalloc and handle failures. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31195a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 613370f9a4bd..d13d883d0039 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -75,7 +75,10 @@ xfs_args_allocate( { struct xfs_mount_args *args; - args = kmem_zalloc(sizeof(struct xfs_mount_args), KM_SLEEP); + args = kzalloc(sizeof(struct xfs_mount_args), GFP_KERNEL); + if (!args) + return NULL; + args->logbufs = args->logbufsize = -1; strncpy(args->fsname, sb->s_id, MAXNAMELEN); @@ -1396,9 +1399,13 @@ xfs_fs_remount( char *options) { struct xfs_mount *mp = XFS_M(sb); - struct xfs_mount_args *args = xfs_args_allocate(sb, 0); + struct xfs_mount_args *args; int error; + args = xfs_args_allocate(sb, 0); + if (!args) + return -ENOMEM; + error = xfs_parseargs(mp, options, args, 1); if (error) goto out_free_args; @@ -1420,7 +1427,7 @@ xfs_fs_remount( } out_free_args: - kmem_free(args); + kfree(args); return -error; } @@ -1725,9 +1732,13 @@ xfs_fs_fill_super( { struct inode *root; struct xfs_mount *mp = NULL; - struct xfs_mount_args *args = xfs_args_allocate(sb, silent); + struct xfs_mount_args *args; int flags = 0, error; + args = xfs_args_allocate(sb, silent); + if (!args) + return -ENOMEM; + mp = xfs_mount_init(); INIT_LIST_HEAD(&mp->m_sync_list); @@ -1826,7 +1837,7 @@ xfs_fs_fill_super( xfs_itrace_exit(XFS_I(sb->s_root->d_inode)); - kmem_free(args); + kfree(args); return 0; error2: @@ -1874,7 +1885,7 @@ xfs_fs_fill_super( kmem_free(mp); fail_vfsop: - kmem_free(args); + kfree(args); return -error; } -- cgit v1.2.3 From c962fb7902669a48a2c613649c1f03865c0ffd1e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 15:10:52 +1000 Subject: [XFS] kill xfs_mount_init xfs_mount_init is inlined into xfs_fs_fill_super and allocation switched to kzalloc. Plug a leak of the mount structure for most early mount failures. Move xfs_icsb_init_counters to as late as possible in the mount path and make sure to undo it so that no stale hotplug cpu notifiers are left around on mount failures. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31196a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 37 +++++++++++++++++++++++-------------- fs/xfs/xfs_mount.c | 30 ++---------------------------- fs/xfs/xfs_mount.h | 8 ++++---- 3 files changed, 29 insertions(+), 46 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index d13d883d0039..fe52e9276aad 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1273,10 +1273,11 @@ xfs_fs_put_super( } xfs_unmountfs(mp); + xfs_icsb_destroy_counters(mp); xfs_close_devices(mp); xfs_qmops_put(mp); xfs_dmops_put(mp); - kmem_free(mp); + kfree(mp); } STATIC void @@ -1733,14 +1734,20 @@ xfs_fs_fill_super( struct inode *root; struct xfs_mount *mp = NULL; struct xfs_mount_args *args; - int flags = 0, error; + int flags = 0, error = ENOMEM; args = xfs_args_allocate(sb, silent); if (!args) return -ENOMEM; - mp = xfs_mount_init(); + mp = kzalloc(sizeof(struct xfs_mount), GFP_KERNEL); + if (!mp) + goto out_free_args; + spin_lock_init(&mp->m_sb_lock); + mutex_init(&mp->m_ilock); + mutex_init(&mp->m_growlock); + atomic_set(&mp->m_active_trans, 0); INIT_LIST_HEAD(&mp->m_sync_list); spin_lock_init(&mp->m_sync_lock); init_waitqueue_head(&mp->m_wait_single_sync_task); @@ -1753,7 +1760,7 @@ xfs_fs_fill_super( error = xfs_parseargs(mp, (char *)data, args, 0); if (error) - goto fail_vfsop; + goto out_free_mp; sb_min_blocksize(sb, BBSIZE); sb->s_export_op = &xfs_export_operations; @@ -1762,7 +1769,7 @@ xfs_fs_fill_super( error = xfs_dmops_get(mp, args); if (error) - goto fail_vfsop; + goto out_free_mp; error = xfs_qmops_get(mp, args); if (error) goto out_put_dmops; @@ -1774,6 +1781,9 @@ xfs_fs_fill_super( if (error) goto out_put_qmops; + if (xfs_icsb_init_counters(mp)) + mp->m_flags |= XFS_MOUNT_NO_PERCPU_SB; + /* * Setup flags based on mount(2) options and then the superblock */ @@ -1849,12 +1859,18 @@ xfs_fs_fill_super( xfs_binval(mp->m_logdev_targp); if (mp->m_rtdev_targp) xfs_binval(mp->m_rtdev_targp); + out_destroy_counters: + xfs_icsb_destroy_counters(mp); xfs_close_devices(mp); out_put_qmops: xfs_qmops_put(mp); out_put_dmops: xfs_dmops_put(mp); - goto fail_vfsop; + out_free_mp: + kfree(mp); + out_free_args: + kfree(args); + return -error; fail_vnrele: if (sb->s_root) { @@ -1879,14 +1895,7 @@ xfs_fs_fill_super( IRELE(mp->m_rootip); xfs_unmountfs(mp); - xfs_close_devices(mp); - xfs_qmops_put(mp); - xfs_dmops_put(mp); - kmem_free(mp); - - fail_vfsop: - kfree(args); - return -error; + goto out_destroy_counters; } STATIC int diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index c67f8a9ae418..1bfaa204f689 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -51,7 +51,6 @@ STATIC void xfs_unmountfs_wait(xfs_mount_t *); #ifdef HAVE_PERCPU_SB -STATIC void xfs_icsb_destroy_counters(xfs_mount_t *); STATIC void xfs_icsb_balance_counter(xfs_mount_t *, xfs_sb_field_t, int); STATIC void xfs_icsb_balance_counter_locked(xfs_mount_t *, xfs_sb_field_t, @@ -62,7 +61,6 @@ STATIC void xfs_icsb_disable_counter(xfs_mount_t *, xfs_sb_field_t); #else -#define xfs_icsb_destroy_counters(mp) do { } while (0) #define xfs_icsb_balance_counter(mp, a, b) do { } while (0) #define xfs_icsb_balance_counter_locked(mp, a, b) do { } while (0) #define xfs_icsb_modify_counters(mp, a, b, c) do { } while (0) @@ -124,34 +122,12 @@ static const struct { { sizeof(xfs_sb_t), 0 } }; -/* - * Return a pointer to an initialized xfs_mount structure. - */ -xfs_mount_t * -xfs_mount_init(void) -{ - xfs_mount_t *mp; - - mp = kmem_zalloc(sizeof(xfs_mount_t), KM_SLEEP); - - if (xfs_icsb_init_counters(mp)) { - mp->m_flags |= XFS_MOUNT_NO_PERCPU_SB; - } - - spin_lock_init(&mp->m_sb_lock); - mutex_init(&mp->m_ilock); - mutex_init(&mp->m_growlock); - atomic_set(&mp->m_active_trans, 0); - - return mp; -} - /* * Free up the resources associated with a mount structure. Assume that * the structure was initially zeroed, so we can tell which fields got * initialized. */ -void +STATIC void xfs_mount_free( xfs_mount_t *mp) { @@ -177,8 +153,6 @@ xfs_mount_free( kmem_free(mp->m_rtname); if (mp->m_logname != NULL) kmem_free(mp->m_logname); - - xfs_icsb_destroy_counters(mp); } /* @@ -2093,7 +2067,7 @@ xfs_icsb_reinit_counters( xfs_icsb_unlock(mp); } -STATIC void +void xfs_icsb_destroy_counters( xfs_mount_t *mp) { diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index 5acde7fd9c0a..96d8791e9e5a 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -210,12 +210,14 @@ typedef struct xfs_icsb_cnts { extern int xfs_icsb_init_counters(struct xfs_mount *); extern void xfs_icsb_reinit_counters(struct xfs_mount *); +extern void xfs_icsb_destroy_counters(struct xfs_mount *); extern void xfs_icsb_sync_counters(struct xfs_mount *, int); extern void xfs_icsb_sync_counters_locked(struct xfs_mount *, int); #else -#define xfs_icsb_init_counters(mp) (0) -#define xfs_icsb_reinit_counters(mp) do { } while (0) +#define xfs_icsb_init_counters(mp) (0) +#define xfs_icsb_destroy_counters(mp) do { } while (0) +#define xfs_icsb_reinit_counters(mp) do { } while (0) #define xfs_icsb_sync_counters(mp, flags) do { } while (0) #define xfs_icsb_sync_counters_locked(mp, flags) do { } while (0) #endif @@ -511,10 +513,8 @@ typedef struct xfs_mod_sb { #define XFS_MOUNT_ILOCK(mp) mutex_lock(&((mp)->m_ilock)) #define XFS_MOUNT_IUNLOCK(mp) mutex_unlock(&((mp)->m_ilock)) -extern xfs_mount_t *xfs_mount_init(void); extern void xfs_mod_sb(xfs_trans_t *, __int64_t); extern int xfs_log_sbcount(xfs_mount_t *, uint); -extern void xfs_mount_free(xfs_mount_t *mp); extern int xfs_mountfs(xfs_mount_t *mp, int); extern void xfs_mountfs_check_barriers(xfs_mount_t *mp); -- cgit v1.2.3 From 95db4e21b72603217f0bcafa4da9ee01fc1d2389 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 15:10:58 +1000 Subject: [XFS] kill calls to xfs_binval in the mount error path xfs_binval aka xfs_flush_buftarg is the first thing done in xfs_free_buftarg, so there is no need to have duplicated calls just before xfs_free_buftarg in the mount failure path. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31197a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index fe52e9276aad..d2155b1de10c 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1789,10 +1789,10 @@ xfs_fs_fill_super( */ error = xfs_start_flags(args, mp); if (error) - goto error1; + goto out_destroy_counters; error = xfs_readsb(mp, flags); if (error) - goto error1; + goto out_destroy_counters; error = xfs_finish_flags(args, mp); if (error) goto error2; @@ -1853,12 +1853,6 @@ xfs_fs_fill_super( error2: if (mp->m_sb_bp) xfs_freesb(mp); - error1: - xfs_binval(mp->m_ddev_targp); - if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) - xfs_binval(mp->m_logdev_targp); - if (mp->m_rtdev_targp) - xfs_binval(mp->m_rtdev_targp); out_destroy_counters: xfs_icsb_destroy_counters(mp); xfs_close_devices(mp); -- cgit v1.2.3 From effa2eda3ab9c013585349b8afd305dc5decf771 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 15:11:05 +1000 Subject: [XFS] rename error2 goto label in xfs_fs_fill_super SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31198a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index d2155b1de10c..4c662d63d626 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1795,22 +1795,22 @@ xfs_fs_fill_super( goto out_destroy_counters; error = xfs_finish_flags(args, mp); if (error) - goto error2; + goto out_free_sb; error = xfs_setup_devices(mp); if (error) - goto error2; + goto out_free_sb; if (mp->m_flags & XFS_MOUNT_BARRIER) xfs_mountfs_check_barriers(mp); error = xfs_filestream_mount(mp); if (error) - goto error2; + goto out_free_sb; error = xfs_mountfs(mp, flags); if (error) - goto error2; + goto out_free_sb; XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, args->mtpt, args->fsname); @@ -1850,9 +1850,8 @@ xfs_fs_fill_super( kfree(args); return 0; - error2: - if (mp->m_sb_bp) - xfs_freesb(mp); + out_free_sb: + xfs_freesb(mp); out_destroy_counters: xfs_icsb_destroy_counters(mp); xfs_close_devices(mp); -- cgit v1.2.3 From 120226c11a6277d3e761393f0995c55218fabebb Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 15:11:11 +1000 Subject: [XFS] add missing call to xfs_filestream_unmount on xfs_mountfs failure SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31199a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 4c662d63d626..41eea24a46e4 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1810,7 +1810,7 @@ xfs_fs_fill_super( error = xfs_mountfs(mp, flags); if (error) - goto out_free_sb; + goto out_filestream_unmount; XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, args->mtpt, args->fsname); @@ -1850,6 +1850,8 @@ xfs_fs_fill_super( kfree(args); return 0; + out_filestream_unmount: + xfs_filestream_unmount(mp); out_free_sb: xfs_freesb(mp); out_destroy_counters: -- cgit v1.2.3 From 68f34d5107dbace3d14a1c2f060fc8941894879c Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Tue, 20 May 2008 15:11:17 +1000 Subject: [XFS] de-duplicate calls to xfs_attr_trace_enter Every call to xfs_attr_trace_enter() shares the exact same 16 args in the middle... just send in the context pointer and let the next level down split it into the ktrace. Compile tested only. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:31200a Signed-off-by: Eric Sandeen Signed-off-by: Niv Sardi Signed-off-by: Josef 'Jeff' Sipek Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_attr.c | 106 ++++++++++++--------------------------------------- fs/xfs/xfs_attr_sf.h | 10 ++--- 2 files changed, 28 insertions(+), 88 deletions(-) diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index 86d8619f279c..5e5dbe62b194 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -2300,23 +2300,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) void xfs_attr_trace_l_c(char *where, struct xfs_attr_list_context *context) { - xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_C, where, - (__psunsigned_t)context->dp, - (__psunsigned_t)context->cursor->hashval, - (__psunsigned_t)context->cursor->blkno, - (__psunsigned_t)context->cursor->offset, - (__psunsigned_t)context->alist, - (__psunsigned_t)context->bufsize, - (__psunsigned_t)context->count, - (__psunsigned_t)context->firstu, - (__psunsigned_t) - ((context->count > 0) && - !(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL))) - ? (ATTR_ENTRY(context->alist, - context->count-1)->a_valuelen) - : 0, - (__psunsigned_t)context->dupcnt, - (__psunsigned_t)context->flags, + xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_C, where, context, (__psunsigned_t)NULL, (__psunsigned_t)NULL, (__psunsigned_t)NULL); @@ -2329,23 +2313,7 @@ void xfs_attr_trace_l_cn(char *where, struct xfs_attr_list_context *context, struct xfs_da_intnode *node) { - xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CN, where, - (__psunsigned_t)context->dp, - (__psunsigned_t)context->cursor->hashval, - (__psunsigned_t)context->cursor->blkno, - (__psunsigned_t)context->cursor->offset, - (__psunsigned_t)context->alist, - (__psunsigned_t)context->bufsize, - (__psunsigned_t)context->count, - (__psunsigned_t)context->firstu, - (__psunsigned_t) - ((context->count > 0) && - !(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL))) - ? (ATTR_ENTRY(context->alist, - context->count-1)->a_valuelen) - : 0, - (__psunsigned_t)context->dupcnt, - (__psunsigned_t)context->flags, + xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CN, where, context, (__psunsigned_t)be16_to_cpu(node->hdr.count), (__psunsigned_t)be32_to_cpu(node->btree[0].hashval), (__psunsigned_t)be32_to_cpu(node->btree[ @@ -2359,23 +2327,7 @@ void xfs_attr_trace_l_cb(char *where, struct xfs_attr_list_context *context, struct xfs_da_node_entry *btree) { - xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CB, where, - (__psunsigned_t)context->dp, - (__psunsigned_t)context->cursor->hashval, - (__psunsigned_t)context->cursor->blkno, - (__psunsigned_t)context->cursor->offset, - (__psunsigned_t)context->alist, - (__psunsigned_t)context->bufsize, - (__psunsigned_t)context->count, - (__psunsigned_t)context->firstu, - (__psunsigned_t) - ((context->count > 0) && - !(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL))) - ? (ATTR_ENTRY(context->alist, - context->count-1)->a_valuelen) - : 0, - (__psunsigned_t)context->dupcnt, - (__psunsigned_t)context->flags, + xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CB, where, context, (__psunsigned_t)be32_to_cpu(btree->hashval), (__psunsigned_t)be32_to_cpu(btree->before), (__psunsigned_t)NULL); @@ -2388,23 +2340,7 @@ void xfs_attr_trace_l_cl(char *where, struct xfs_attr_list_context *context, struct xfs_attr_leafblock *leaf) { - xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CL, where, - (__psunsigned_t)context->dp, - (__psunsigned_t)context->cursor->hashval, - (__psunsigned_t)context->cursor->blkno, - (__psunsigned_t)context->cursor->offset, - (__psunsigned_t)context->alist, - (__psunsigned_t)context->bufsize, - (__psunsigned_t)context->count, - (__psunsigned_t)context->firstu, - (__psunsigned_t) - ((context->count > 0) && - !(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL))) - ? (ATTR_ENTRY(context->alist, - context->count-1)->a_valuelen) - : 0, - (__psunsigned_t)context->dupcnt, - (__psunsigned_t)context->flags, + xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CL, where, context, (__psunsigned_t)be16_to_cpu(leaf->hdr.count), (__psunsigned_t)be32_to_cpu(leaf->entries[0].hashval), (__psunsigned_t)be32_to_cpu(leaf->entries[ @@ -2417,22 +2353,30 @@ xfs_attr_trace_l_cl(char *where, struct xfs_attr_list_context *context, */ void xfs_attr_trace_enter(int type, char *where, - __psunsigned_t a2, __psunsigned_t a3, - __psunsigned_t a4, __psunsigned_t a5, - __psunsigned_t a6, __psunsigned_t a7, - __psunsigned_t a8, __psunsigned_t a9, - __psunsigned_t a10, __psunsigned_t a11, - __psunsigned_t a12, __psunsigned_t a13, - __psunsigned_t a14, __psunsigned_t a15) + struct xfs_attr_list_context *context, + __psunsigned_t a13, __psunsigned_t a14, + __psunsigned_t a15) { ASSERT(xfs_attr_trace_buf); ktrace_enter(xfs_attr_trace_buf, (void *)((__psunsigned_t)type), - (void *)where, - (void *)a2, (void *)a3, (void *)a4, - (void *)a5, (void *)a6, (void *)a7, - (void *)a8, (void *)a9, (void *)a10, - (void *)a11, (void *)a12, (void *)a13, - (void *)a14, (void *)a15); + (void *)((__psunsigned_t)where), + (void *)((__psunsigned_t)context->dp), + (void *)((__psunsigned_t)context->cursor->hashval), + (void *)((__psunsigned_t)context->cursor->blkno), + (void *)((__psunsigned_t)context->cursor->offset), + (void *)((__psunsigned_t)context->alist), + (void *)((__psunsigned_t)context->bufsize), + (void *)((__psunsigned_t)context->count), + (void *)((__psunsigned_t)context->firstu), + (void *)((__psunsigned_t) + (((context->count > 0) && + !(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL))) + ? (ATTR_ENTRY(context->alist, + context->count-1)->a_valuelen) + : 0)), + (void *)((__psunsigned_t)context->dupcnt), + (void *)((__psunsigned_t)context->flags), + (void *)a13, (void *)a14, (void *)a15); } #endif /* XFS_ATTR_TRACE */ diff --git a/fs/xfs/xfs_attr_sf.h b/fs/xfs/xfs_attr_sf.h index f67f917803b1..ea22839caed2 100644 --- a/fs/xfs/xfs_attr_sf.h +++ b/fs/xfs/xfs_attr_sf.h @@ -97,13 +97,9 @@ void xfs_attr_trace_l_cb(char *where, struct xfs_attr_list_context *context, void xfs_attr_trace_l_cl(char *where, struct xfs_attr_list_context *context, struct xfs_attr_leafblock *leaf); void xfs_attr_trace_enter(int type, char *where, - __psunsigned_t a2, __psunsigned_t a3, - __psunsigned_t a4, __psunsigned_t a5, - __psunsigned_t a6, __psunsigned_t a7, - __psunsigned_t a8, __psunsigned_t a9, - __psunsigned_t a10, __psunsigned_t a11, - __psunsigned_t a12, __psunsigned_t a13, - __psunsigned_t a14, __psunsigned_t a15); + struct xfs_attr_list_context *context, + __psunsigned_t a13, __psunsigned_t a14, + __psunsigned_t a15); #else #define xfs_attr_trace_l_c(w,c) #define xfs_attr_trace_l_cn(w,c,n) -- cgit v1.2.3 From 5163f95a08cbf058ae16452c2242c5600fedc32e Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Wed, 21 May 2008 16:41:01 +1000 Subject: [XFS] Name operation vector for hash and compare Adds two pieces of functionality for the basis of case-insensitive support in XFS: 1. A comparison result enumerated type: xfs_dacmp. It represents an exact match, case-insensitive match or no match at all. This patch only implements different and exact results. 2. xfs_nameops vector for specifying how to perform the hash generation of filenames and comparision methods. In this patch the hash vector points to the existing xfs_da_hashname function and the comparison method does a length compare, and if the same, does a memcmp and return the xfs_dacmp result. All filename functions that use the hash (create, lookup remove, rename, etc) now use the xfs_nameops.hashname function and all directory lookup functions also use the xfs_nameops.compname function. The lookup functions also handle case-insensitive results even though the default comparison function cannot return that. And important aspect of the lookup functions is that an exact match always has precedence over a case-insensitive. So while a case-insensitive match is found, we have to keep looking just in case there is an exact match. In the meantime, the info for the first case-insensitive match is retained if no exact match is found. SGI-PV: 981519 SGI-Modid: xfs-linux-melb:xfs-kern:31205a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_da_btree.c | 22 ++++++++++++++++++ fs/xfs/xfs_da_btree.h | 22 ++++++++++++++++++ fs/xfs/xfs_dir2.c | 12 ++++++---- fs/xfs/xfs_dir2_block.c | 33 +++++++++++++++++++------- fs/xfs/xfs_dir2_data.c | 5 +++- fs/xfs/xfs_dir2_leaf.c | 60 +++++++++++++++++++++++++++++++++-------------- fs/xfs/xfs_dir2_node.c | 23 +++++++++++------- fs/xfs/xfs_dir2_sf.c | 62 ++++++++++++++++++++++++++++--------------------- fs/xfs/xfs_mount.h | 2 ++ 9 files changed, 174 insertions(+), 67 deletions(-) diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index 294780427abb..ae4b18c7726b 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -1530,6 +1530,28 @@ xfs_da_hashname(const uchar_t *name, int namelen) } } +enum xfs_dacmp +xfs_da_compname( + struct xfs_da_args *args, + const char *name, + int len) +{ + return (args->namelen == len && memcmp(args->name, name, len) == 0) ? + XFS_CMP_EXACT : XFS_CMP_DIFFERENT; +} + +static xfs_dahash_t +xfs_default_hashname( + struct xfs_name *name) +{ + return xfs_da_hashname(name->name, name->len); +} + +const struct xfs_nameops xfs_default_nameops = { + .hashname = xfs_default_hashname, + .compname = xfs_da_compname +}; + /* * Add a block to the btree ahead of the file. * Return the new block number to the caller. diff --git a/fs/xfs/xfs_da_btree.h b/fs/xfs/xfs_da_btree.h index 7facf86f74f9..e64c6924996f 100644 --- a/fs/xfs/xfs_da_btree.h +++ b/fs/xfs/xfs_da_btree.h @@ -98,6 +98,15 @@ typedef struct xfs_da_node_entry xfs_da_node_entry_t; * Btree searching and modification structure definitions. *========================================================================*/ +/* + * Search comparison results + */ +enum xfs_dacmp { + XFS_CMP_DIFFERENT, /* names are completely different */ + XFS_CMP_EXACT, /* names are exactly the same */ + XFS_CMP_CASE /* names are same but differ in case */ +}; + /* * Structure to ease passing around component names. */ @@ -127,6 +136,7 @@ typedef struct xfs_da_args { unsigned char rename; /* T/F: this is an atomic rename op */ unsigned char addname; /* T/F: this is an add operation */ unsigned char oknoent; /* T/F: ok to return ENOENT, else die */ + enum xfs_dacmp cmpresult; /* name compare result for lookups */ } xfs_da_args_t; /* @@ -201,6 +211,14 @@ typedef struct xfs_da_state { (uint)(XFS_DA_LOGOFF(BASE, ADDR)), \ (uint)(XFS_DA_LOGOFF(BASE, ADDR)+(SIZE)-1) +/* + * Name ops for directory and/or attr name operations + */ +struct xfs_nameops { + xfs_dahash_t (*hashname)(struct xfs_name *); + enum xfs_dacmp (*compname)(struct xfs_da_args *, const char *, int); +}; + #ifdef __KERNEL__ /*======================================================================== @@ -249,6 +267,10 @@ int xfs_da_shrink_inode(xfs_da_args_t *args, xfs_dablk_t dead_blkno, xfs_dabuf_t *dead_buf); uint xfs_da_hashname(const uchar_t *name_string, int name_length); +enum xfs_dacmp xfs_da_compname(struct xfs_da_args *args, + const char *name, int len); + + xfs_da_state_t *xfs_da_state_alloc(void); void xfs_da_state_free(xfs_da_state_t *state); diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c index 0284af1734bd..675899bb7048 100644 --- a/fs/xfs/xfs_dir2.c +++ b/fs/xfs/xfs_dir2.c @@ -65,6 +65,7 @@ xfs_dir_mount( (mp->m_dirblksize - (uint)sizeof(xfs_da_node_hdr_t)) / (uint)sizeof(xfs_da_node_entry_t); mp->m_dir_magicpct = (mp->m_dirblksize * 37) / 100; + mp->m_dirnameops = &xfs_default_nameops; } /* @@ -164,7 +165,7 @@ xfs_dir_createname( args.name = name->name; args.namelen = name->len; - args.hashval = xfs_da_hashname(name->name, name->len); + args.hashval = dp->i_mount->m_dirnameops->hashname(name); args.inumber = inum; args.dp = dp; args.firstblock = first; @@ -210,11 +211,12 @@ xfs_dir_lookup( args.name = name->name; args.namelen = name->len; - args.hashval = xfs_da_hashname(name->name, name->len); + args.hashval = dp->i_mount->m_dirnameops->hashname(name); args.dp = dp; args.whichfork = XFS_DATA_FORK; args.trans = tp; args.oknoent = 1; + args.cmpresult = XFS_CMP_DIFFERENT; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_lookup(&args); @@ -257,7 +259,7 @@ xfs_dir_removename( args.name = name->name; args.namelen = name->len; - args.hashval = xfs_da_hashname(name->name, name->len); + args.hashval = dp->i_mount->m_dirnameops->hashname(name); args.inumber = ino; args.dp = dp; args.firstblock = first; @@ -340,7 +342,7 @@ xfs_dir_replace( args.name = name->name; args.namelen = name->len; - args.hashval = xfs_da_hashname(name->name, name->len); + args.hashval = dp->i_mount->m_dirnameops->hashname(name); args.inumber = inum; args.dp = dp; args.firstblock = first; @@ -388,7 +390,7 @@ xfs_dir_canenter( args.name = name->name; args.namelen = name->len; - args.hashval = xfs_da_hashname(name->name, name->len); + args.hashval = dp->i_mount->m_dirnameops->hashname(name); args.dp = dp; args.whichfork = XFS_DATA_FORK; args.trans = tp; diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c index e8a7aca5fe23..98588491cb0e 100644 --- a/fs/xfs/xfs_dir2_block.c +++ b/fs/xfs/xfs_dir2_block.c @@ -643,6 +643,7 @@ xfs_dir2_block_lookup_int( int mid; /* binary search current idx */ xfs_mount_t *mp; /* filesystem mount point */ xfs_trans_t *tp; /* transaction pointer */ + enum xfs_dacmp cmp; /* comparison result */ dp = args->dp; tp = args->trans; @@ -697,20 +698,31 @@ xfs_dir2_block_lookup_int( dep = (xfs_dir2_data_entry_t *) ((char *)block + xfs_dir2_dataptr_to_off(mp, addr)); /* - * Compare, if it's right give back buffer & entry number. + * Compare name and if it's an exact match, return the index + * and buffer. If it's the first case-insensitive match, store + * the index and buffer and continue looking for an exact match. */ - if (dep->namelen == args->namelen && - dep->name[0] == args->name[0] && - memcmp(dep->name, args->name, args->namelen) == 0) { + cmp = mp->m_dirnameops->compname(args, dep->name, dep->namelen); + if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) { + args->cmpresult = cmp; *bpp = bp; *entno = mid; - return 0; + if (cmp == XFS_CMP_EXACT) + return 0; } - } while (++mid < be32_to_cpu(btp->count) && be32_to_cpu(blp[mid].hashval) == hash); + } while (++mid < be32_to_cpu(btp->count) && + be32_to_cpu(blp[mid].hashval) == hash); + + ASSERT(args->oknoent); + /* + * Here, we can only be doing a lookup (not a rename or replace). + * If a case-insensitive match was found earlier, return success. + */ + if (args->cmpresult == XFS_CMP_CASE) + return 0; /* * No match, release the buffer and return ENOENT. */ - ASSERT(args->oknoent); xfs_da_brelse(tp, bp); return XFS_ERROR(ENOENT); } @@ -1033,6 +1045,7 @@ xfs_dir2_sf_to_block( xfs_dir2_sf_t *sfp; /* shortform structure */ __be16 *tagp; /* end of data entry */ xfs_trans_t *tp; /* transaction pointer */ + struct xfs_name name; xfs_dir2_trace_args("sf_to_block", args); dp = args->dp; @@ -1187,8 +1200,10 @@ xfs_dir2_sf_to_block( tagp = xfs_dir2_data_entry_tag_p(dep); *tagp = cpu_to_be16((char *)dep - (char *)block); xfs_dir2_data_log_entry(tp, bp, dep); - blp[2 + i].hashval = cpu_to_be32(xfs_da_hashname( - (char *)sfep->name, sfep->namelen)); + name.name = sfep->name; + name.len = sfep->namelen; + blp[2 + i].hashval = cpu_to_be32(mp->m_dirnameops-> + hashname(&name)); blp[2 + i].address = cpu_to_be32(xfs_dir2_byte_to_dataptr(mp, (char *)dep - (char *)block)); offset = (int)((char *)(tagp + 1) - (char *)block); diff --git a/fs/xfs/xfs_dir2_data.c b/fs/xfs/xfs_dir2_data.c index fb8c9e08b23d..498f8d694330 100644 --- a/fs/xfs/xfs_dir2_data.c +++ b/fs/xfs/xfs_dir2_data.c @@ -65,6 +65,7 @@ xfs_dir2_data_check( xfs_mount_t *mp; /* filesystem mount point */ char *p; /* current data position */ int stale; /* count of stale leaves */ + struct xfs_name name; mp = dp->i_mount; d = bp->data; @@ -140,7 +141,9 @@ xfs_dir2_data_check( addr = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk, (xfs_dir2_data_aoff_t) ((char *)dep - (char *)d)); - hash = xfs_da_hashname((char *)dep->name, dep->namelen); + name.name = dep->name; + name.len = dep->namelen; + hash = mp->m_dirnameops->hashname(&name); for (i = 0; i < be32_to_cpu(btp->count); i++) { if (be32_to_cpu(lep[i].address) == addr && be32_to_cpu(lep[i].hashval) == hash) diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c index e33433408e4a..b52903bc0b14 100644 --- a/fs/xfs/xfs_dir2_leaf.c +++ b/fs/xfs/xfs_dir2_leaf.c @@ -1331,6 +1331,8 @@ xfs_dir2_leaf_lookup_int( xfs_mount_t *mp; /* filesystem mount point */ xfs_dir2_db_t newdb; /* new data block number */ xfs_trans_t *tp; /* transaction pointer */ + xfs_dabuf_t *cbp; /* case match data buffer */ + enum xfs_dacmp cmp; /* name compare result */ dp = args->dp; tp = args->trans; @@ -1354,9 +1356,11 @@ xfs_dir2_leaf_lookup_int( * Loop over all the entries with the right hash value * looking to match the name. */ + cbp = NULL; for (lep = &leaf->ents[index], dbp = NULL, curdb = -1; - index < be16_to_cpu(leaf->hdr.count) && be32_to_cpu(lep->hashval) == args->hashval; - lep++, index++) { + index < be16_to_cpu(leaf->hdr.count) && + be32_to_cpu(lep->hashval) == args->hashval; + lep++, index++) { /* * Skip over stale leaf entries. */ @@ -1371,12 +1375,12 @@ xfs_dir2_leaf_lookup_int( * need to pitch the old one and read the new one. */ if (newdb != curdb) { - if (dbp) + if (dbp != cbp) xfs_da_brelse(tp, dbp); - if ((error = - xfs_da_read_buf(tp, dp, - xfs_dir2_db_to_da(mp, newdb), -1, &dbp, - XFS_DATA_FORK))) { + error = xfs_da_read_buf(tp, dp, + xfs_dir2_db_to_da(mp, newdb), + -1, &dbp, XFS_DATA_FORK); + if (error) { xfs_da_brelse(tp, lbp); return error; } @@ -1386,24 +1390,46 @@ xfs_dir2_leaf_lookup_int( /* * Point to the data entry. */ - dep = (xfs_dir2_data_entry_t *) - ((char *)dbp->data + - xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address))); + dep = (xfs_dir2_data_entry_t *)((char *)dbp->data + + xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address))); /* - * If it matches then return it. + * Compare name and if it's an exact match, return the index + * and buffer. If it's the first case-insensitive match, store + * the index and buffer and continue looking for an exact match. */ - if (dep->namelen == args->namelen && - dep->name[0] == args->name[0] && - memcmp(dep->name, args->name, args->namelen) == 0) { - *dbpp = dbp; + cmp = mp->m_dirnameops->compname(args, dep->name, dep->namelen); + if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) { + args->cmpresult = cmp; *indexp = index; - return 0; + /* + * case exact match: release the stored CI buffer if it + * exists and return the current buffer. + */ + if (cmp == XFS_CMP_EXACT) { + if (cbp && cbp != dbp) + xfs_da_brelse(tp, cbp); + *dbpp = dbp; + return 0; + } + cbp = dbp; } } + ASSERT(args->oknoent); + /* + * Here, we can only be doing a lookup (not a rename or replace). + * If a case-insensitive match was found earlier, release the current + * buffer and return the stored CI matching buffer. + */ + if (args->cmpresult == XFS_CMP_CASE) { + if (cbp != dbp) + xfs_da_brelse(tp, dbp); + *dbpp = cbp; + return 0; + } /* * No match found, return ENOENT. */ - ASSERT(args->oknoent); + ASSERT(cbp == NULL); if (dbp) xfs_da_brelse(tp, dbp); xfs_da_brelse(tp, lbp); diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c index e29b7c63e198..fedf8f976a10 100644 --- a/fs/xfs/xfs_dir2_node.c +++ b/fs/xfs/xfs_dir2_node.c @@ -556,6 +556,7 @@ xfs_dir2_leafn_lookup_for_entry( xfs_mount_t *mp; /* filesystem mount point */ xfs_dir2_db_t newdb; /* new data block number */ xfs_trans_t *tp; /* transaction pointer */ + enum xfs_dacmp cmp; /* comparison result */ dp = args->dp; tp = args->trans; @@ -620,17 +621,21 @@ xfs_dir2_leafn_lookup_for_entry( dep = (xfs_dir2_data_entry_t *)((char *)curbp->data + xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address))); /* - * Compare the entry, return it if it matches. + * Compare the entry and if it's an exact match, return + * EEXIST immediately. If it's the first case-insensitive + * match, store the inode number and continue looking. */ - if (dep->namelen == args->namelen && memcmp(dep->name, - args->name, args->namelen) == 0) { + cmp = mp->m_dirnameops->compname(args, dep->name, dep->namelen); + if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) { + args->cmpresult = cmp; args->inumber = be64_to_cpu(dep->inumber); di = (int)((char *)dep - (char *)curbp->data); error = EEXIST; - goto out; + if (cmp == XFS_CMP_EXACT) + goto out; } } - /* Didn't find a match. */ + /* Didn't find an exact match. */ error = ENOENT; di = -1; ASSERT(index == be16_to_cpu(leaf->hdr.count) || args->oknoent); @@ -1813,6 +1818,8 @@ xfs_dir2_node_lookup( error = xfs_da_node_lookup_int(state, &rval); if (error) rval = error; + else if (rval == ENOENT && args->cmpresult == XFS_CMP_CASE) + rval = EEXIST; /* a case-insensitive match was found */ /* * Release the btree blocks and leaf block. */ @@ -1856,9 +1863,8 @@ xfs_dir2_node_removename( * Look up the entry we're deleting, set up the cursor. */ error = xfs_da_node_lookup_int(state, &rval); - if (error) { + if (error) rval = error; - } /* * Didn't find it, upper layer screwed up. */ @@ -1875,9 +1881,8 @@ xfs_dir2_node_removename( */ error = xfs_dir2_leafn_remove(args, blk->bp, blk->index, &state->extrablk, &rval); - if (error) { + if (error) return error; - } /* * Fix the hash values up the btree. */ diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c index ca33bc62edc2..dcd09cada43f 100644 --- a/fs/xfs/xfs_dir2_sf.c +++ b/fs/xfs/xfs_dir2_sf.c @@ -814,6 +814,7 @@ xfs_dir2_sf_lookup( int i; /* entry index */ xfs_dir2_sf_entry_t *sfep; /* shortform directory entry */ xfs_dir2_sf_t *sfp; /* shortform structure */ + enum xfs_dacmp cmp; /* comparison result */ xfs_dir2_trace_args("sf_lookup", args); xfs_dir2_sf_check(args); @@ -836,6 +837,7 @@ xfs_dir2_sf_lookup( */ if (args->namelen == 1 && args->name[0] == '.') { args->inumber = dp->i_ino; + args->cmpresult = XFS_CMP_EXACT; return XFS_ERROR(EEXIST); } /* @@ -844,27 +846,39 @@ xfs_dir2_sf_lookup( if (args->namelen == 2 && args->name[0] == '.' && args->name[1] == '.') { args->inumber = xfs_dir2_sf_get_inumber(sfp, &sfp->hdr.parent); + args->cmpresult = XFS_CMP_EXACT; return XFS_ERROR(EEXIST); } /* * Loop over all the entries trying to match ours. */ - for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); - i < sfp->hdr.count; - i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) { - if (sfep->namelen == args->namelen && - sfep->name[0] == args->name[0] && - memcmp(args->name, sfep->name, args->namelen) == 0) { - args->inumber = - xfs_dir2_sf_get_inumber(sfp, - xfs_dir2_sf_inumberp(sfep)); - return XFS_ERROR(EEXIST); + for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->hdr.count; + i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) { + /* + * Compare name and if it's an exact match, return the inode + * number. If it's the first case-insensitive match, store the + * inode number and continue looking for an exact match. + */ + cmp = dp->i_mount->m_dirnameops->compname(args, sfep->name, + sfep->namelen); + if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) { + args->cmpresult = cmp; + args->inumber = xfs_dir2_sf_get_inumber(sfp, + xfs_dir2_sf_inumberp(sfep)); + if (cmp == XFS_CMP_EXACT) + return XFS_ERROR(EEXIST); } } + ASSERT(args->oknoent); + /* + * Here, we can only be doing a lookup (not a rename or replace). + * If a case-insensitive match was found earlier, return "found". + */ + if (args->cmpresult == XFS_CMP_CASE) + return XFS_ERROR(EEXIST); /* * Didn't find it. */ - ASSERT(args->oknoent); return XFS_ERROR(ENOENT); } @@ -904,24 +918,21 @@ xfs_dir2_sf_removename( * Loop over the old directory entries. * Find the one we're deleting. */ - for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); - i < sfp->hdr.count; - i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) { - if (sfep->namelen == args->namelen && - sfep->name[0] == args->name[0] && - memcmp(sfep->name, args->name, args->namelen) == 0) { + for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->hdr.count; + i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) { + if (xfs_da_compname(args, sfep->name, sfep->namelen) == + XFS_CMP_EXACT) { ASSERT(xfs_dir2_sf_get_inumber(sfp, - xfs_dir2_sf_inumberp(sfep)) == - args->inumber); + xfs_dir2_sf_inumberp(sfep)) == + args->inumber); break; } } /* * Didn't find it. */ - if (i == sfp->hdr.count) { + if (i == sfp->hdr.count) return XFS_ERROR(ENOENT); - } /* * Calculate sizes. */ @@ -1042,11 +1053,10 @@ xfs_dir2_sf_replace( */ else { for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); - i < sfp->hdr.count; - i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) { - if (sfep->namelen == args->namelen && - sfep->name[0] == args->name[0] && - memcmp(args->name, sfep->name, args->namelen) == 0) { + i < sfp->hdr.count; + i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) { + if (xfs_da_compname(args, sfep->name, sfep->namelen) == + XFS_CMP_EXACT) { #if XFS_BIG_INUMS || defined(DEBUG) ino = xfs_dir2_sf_get_inumber(sfp, xfs_dir2_sf_inumberp(sfep)); diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index 96d8791e9e5a..2a75f1703b39 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -61,6 +61,7 @@ struct xfs_bmap_free; struct xfs_extdelta; struct xfs_swapext; struct xfs_mru_cache; +struct xfs_nameops; /* * Prototypes and functions for the Data Migration subsystem. @@ -315,6 +316,7 @@ typedef struct xfs_mount { __uint8_t m_inode_quiesce;/* call quiesce on new inodes. field governed by m_ilock */ __uint8_t m_sectbb_log; /* sectlog - BBSHIFT */ + const struct xfs_nameops *m_dirnameops; /* vector of dir name ops */ int m_dirblksize; /* directory block sz--bytes */ int m_dirblkfsbs; /* directory block sz--fsbs */ xfs_dablk_t m_dirdatablk; /* blockno of dir data v2 */ -- cgit v1.2.3 From 6a178100abf01282eb697ab62b6086b2886dfc00 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Wed, 21 May 2008 16:42:05 +1000 Subject: [XFS] Add op_flags field and helpers to xfs_da_args The end of the xfs_da_args structure has 4 unsigned char fields for true/false information on directory and attr operations using the xfs_da_args structure. The following converts these 4 into a op_flags field that uses the first 4 bits for these fields and allows expansion for future operation information (eg. case-insensitive lookup request). SGI-PV: 981520 SGI-Modid: xfs-linux-melb:xfs-kern:31206a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_attr.c | 11 +++++------ fs/xfs/xfs_attr_leaf.c | 20 +++++++++++--------- fs/xfs/xfs_da_btree.c | 2 +- fs/xfs/xfs_da_btree.h | 13 +++++++++---- fs/xfs/xfs_dir2.c | 14 ++++++++------ fs/xfs/xfs_dir2_block.c | 10 +++++----- fs/xfs/xfs_dir2_leaf.c | 15 ++++++++------- fs/xfs/xfs_dir2_node.c | 16 +++++++++------- fs/xfs/xfs_dir2_sf.c | 8 ++++---- fs/xfs/xfs_dir2_trace.c | 20 +++++++++++--------- 10 files changed, 71 insertions(+), 58 deletions(-) diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index 5e5dbe62b194..557dad611de0 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -241,8 +241,7 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name, args.firstblock = &firstblock; args.flist = &flist; args.whichfork = XFS_ATTR_FORK; - args.addname = 1; - args.oknoent = 1; + args.op_flags = XFS_DA_OP_ADDNAME | XFS_DA_OP_OKNOENT; /* * Determine space new attribute will use, and if it would be @@ -974,7 +973,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args) xfs_da_brelse(args->trans, bp); return(retval); } - args->rename = 1; /* an atomic rename */ + args->op_flags |= XFS_DA_OP_RENAME; /* an atomic rename */ args->blkno2 = args->blkno; /* set 2nd entry info*/ args->index2 = args->index; args->rmtblkno2 = args->rmtblkno; @@ -1054,7 +1053,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args) * so that one disappears and one appears atomically. Then we * must remove the "old" attribute/value pair. */ - if (args->rename) { + if (args->op_flags & XFS_DA_OP_RENAME) { /* * In a separate transaction, set the incomplete flag on the * "old" attr and clear the incomplete flag on the "new" attr. @@ -1307,7 +1306,7 @@ restart: } else if (retval == EEXIST) { if (args->flags & ATTR_CREATE) goto out; - args->rename = 1; /* atomic rename op */ + args->op_flags |= XFS_DA_OP_RENAME; /* atomic rename op */ args->blkno2 = args->blkno; /* set 2nd entry info*/ args->index2 = args->index; args->rmtblkno2 = args->rmtblkno; @@ -1425,7 +1424,7 @@ restart: * so that one disappears and one appears atomically. Then we * must remove the "old" attribute/value pair. */ - if (args->rename) { + if (args->op_flags & XFS_DA_OP_RENAME) { /* * In a separate transaction, set the incomplete flag on the * "old" attr and clear the incomplete flag on the "new" attr. diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index a85e9caf0156..cb345e6e4850 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -369,9 +369,10 @@ xfs_attr_shortform_remove(xfs_da_args_t *args) * Fix up the start offset of the attribute fork */ totsize -= size; - if (totsize == sizeof(xfs_attr_sf_hdr_t) && !args->addname && - (mp->m_flags & XFS_MOUNT_ATTR2) && - (dp->i_d.di_format != XFS_DINODE_FMT_BTREE)) { + if (totsize == sizeof(xfs_attr_sf_hdr_t) && + !(args->op_flags & XFS_DA_OP_ADDNAME) && + (mp->m_flags & XFS_MOUNT_ATTR2) && + (dp->i_d.di_format != XFS_DINODE_FMT_BTREE)) { /* * Last attribute now removed, revert to original * inode format making all literal area available @@ -389,9 +390,10 @@ xfs_attr_shortform_remove(xfs_da_args_t *args) xfs_idata_realloc(dp, -size, XFS_ATTR_FORK); dp->i_d.di_forkoff = xfs_attr_shortform_bytesfit(dp, totsize); ASSERT(dp->i_d.di_forkoff); - ASSERT(totsize > sizeof(xfs_attr_sf_hdr_t) || args->addname || - !(mp->m_flags & XFS_MOUNT_ATTR2) || - dp->i_d.di_format == XFS_DINODE_FMT_BTREE); + ASSERT(totsize > sizeof(xfs_attr_sf_hdr_t) || + (args->op_flags & XFS_DA_OP_ADDNAME) || + !(mp->m_flags & XFS_MOUNT_ATTR2) || + dp->i_d.di_format == XFS_DINODE_FMT_BTREE); dp->i_afp->if_ext_max = XFS_IFORK_ASIZE(dp) / (uint)sizeof(xfs_bmbt_rec_t); dp->i_df.if_ext_max = @@ -531,7 +533,7 @@ xfs_attr_shortform_to_leaf(xfs_da_args_t *args) nargs.total = args->total; nargs.whichfork = XFS_ATTR_FORK; nargs.trans = args->trans; - nargs.oknoent = 1; + nargs.op_flags = XFS_DA_OP_OKNOENT; sfe = &sf->list[0]; for (i = 0; i < sf->hdr.count; i++) { @@ -853,7 +855,7 @@ xfs_attr_leaf_to_shortform(xfs_dabuf_t *bp, xfs_da_args_t *args, int forkoff) nargs.total = args->total; nargs.whichfork = XFS_ATTR_FORK; nargs.trans = args->trans; - nargs.oknoent = 1; + nargs.op_flags = XFS_DA_OP_OKNOENT; entry = &leaf->entries[0]; for (i = 0; i < be16_to_cpu(leaf->hdr.count); entry++, i++) { if (entry->flags & XFS_ATTR_INCOMPLETE) @@ -1155,7 +1157,7 @@ xfs_attr_leaf_add_work(xfs_dabuf_t *bp, xfs_da_args_t *args, int mapindex) entry->hashval = cpu_to_be32(args->hashval); entry->flags = tmp ? XFS_ATTR_LOCAL : 0; entry->flags |= XFS_ATTR_NSP_ARGS_TO_ONDISK(args->flags); - if (args->rename) { + if (args->op_flags & XFS_DA_OP_RENAME) { entry->flags |= XFS_ATTR_INCOMPLETE; if ((args->blkno2 == args->blkno) && (args->index2 <= args->index)) { diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index ae4b18c7726b..edc0aef4e51e 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -1431,7 +1431,7 @@ xfs_da_path_shift(xfs_da_state_t *state, xfs_da_state_path_t *path, } if (level < 0) { *result = XFS_ERROR(ENOENT); /* we're out of our tree */ - ASSERT(args->oknoent); + ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); return(0); } diff --git a/fs/xfs/xfs_da_btree.h b/fs/xfs/xfs_da_btree.h index e64c6924996f..8face64c11fb 100644 --- a/fs/xfs/xfs_da_btree.h +++ b/fs/xfs/xfs_da_btree.h @@ -132,13 +132,18 @@ typedef struct xfs_da_args { int index2; /* index of 2nd attr in blk */ xfs_dablk_t rmtblkno2; /* remote attr value starting blkno */ int rmtblkcnt2; /* remote attr value block count */ - unsigned char justcheck; /* T/F: check for ok with no space */ - unsigned char rename; /* T/F: this is an atomic rename op */ - unsigned char addname; /* T/F: this is an add operation */ - unsigned char oknoent; /* T/F: ok to return ENOENT, else die */ + int op_flags; /* operation flags */ enum xfs_dacmp cmpresult; /* name compare result for lookups */ } xfs_da_args_t; +/* + * Operation flags: + */ +#define XFS_DA_OP_JUSTCHECK 0x0001 /* check for ok with no space */ +#define XFS_DA_OP_RENAME 0x0002 /* this is an atomic rename op */ +#define XFS_DA_OP_ADDNAME 0x0004 /* this is an add operation */ +#define XFS_DA_OP_OKNOENT 0x0008 /* lookup/add op, ENOENT ok, else die */ + /* * Structure to describe buffer(s) for a block. * This is needed in the directory version 2 format case, when diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c index 675899bb7048..3387acd3e471 100644 --- a/fs/xfs/xfs_dir2.c +++ b/fs/xfs/xfs_dir2.c @@ -46,6 +46,8 @@ struct xfs_name xfs_name_dotdot = {"..", 2}; +extern const struct xfs_nameops xfs_default_nameops; + void xfs_dir_mount( xfs_mount_t *mp) @@ -173,8 +175,7 @@ xfs_dir_createname( args.total = total; args.whichfork = XFS_DATA_FORK; args.trans = tp; - args.justcheck = 0; - args.addname = args.oknoent = 1; + args.op_flags = XFS_DA_OP_ADDNAME | XFS_DA_OP_OKNOENT; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_addname(&args); @@ -215,7 +216,7 @@ xfs_dir_lookup( args.dp = dp; args.whichfork = XFS_DATA_FORK; args.trans = tp; - args.oknoent = 1; + args.op_flags = XFS_DA_OP_OKNOENT; args.cmpresult = XFS_CMP_DIFFERENT; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) @@ -267,7 +268,7 @@ xfs_dir_removename( args.total = total; args.whichfork = XFS_DATA_FORK; args.trans = tp; - args.justcheck = args.addname = args.oknoent = 0; + args.op_flags = 0; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_removename(&args); @@ -350,7 +351,7 @@ xfs_dir_replace( args.total = total; args.whichfork = XFS_DATA_FORK; args.trans = tp; - args.justcheck = args.addname = args.oknoent = 0; + args.op_flags = 0; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_replace(&args); @@ -394,7 +395,8 @@ xfs_dir_canenter( args.dp = dp; args.whichfork = XFS_DATA_FORK; args.trans = tp; - args.justcheck = args.addname = args.oknoent = 1; + args.op_flags = XFS_DA_OP_JUSTCHECK | XFS_DA_OP_ADDNAME | + XFS_DA_OP_OKNOENT; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_addname(&args); diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c index 98588491cb0e..dee225918db2 100644 --- a/fs/xfs/xfs_dir2_block.c +++ b/fs/xfs/xfs_dir2_block.c @@ -215,7 +215,7 @@ xfs_dir2_block_addname( /* * If this isn't a real add, we're done with the buffer. */ - if (args->justcheck) + if (args->op_flags & XFS_DA_OP_JUSTCHECK) xfs_da_brelse(tp, bp); /* * If we don't have space for the new entry & leaf ... @@ -225,7 +225,7 @@ xfs_dir2_block_addname( * Not trying to actually do anything, or don't have * a space reservation: return no-space. */ - if (args->justcheck || args->total == 0) + if ((args->op_flags & XFS_DA_OP_JUSTCHECK) || args->total == 0) return XFS_ERROR(ENOSPC); /* * Convert to the next larger format. @@ -240,7 +240,7 @@ xfs_dir2_block_addname( /* * Just checking, and it would work, so say so. */ - if (args->justcheck) + if (args->op_flags & XFS_DA_OP_JUSTCHECK) return 0; needlog = needscan = 0; /* @@ -674,7 +674,7 @@ xfs_dir2_block_lookup_int( else high = mid - 1; if (low > high) { - ASSERT(args->oknoent); + ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); xfs_da_brelse(tp, bp); return XFS_ERROR(ENOENT); } @@ -713,7 +713,7 @@ xfs_dir2_block_lookup_int( } while (++mid < be32_to_cpu(btp->count) && be32_to_cpu(blp[mid].hashval) == hash); - ASSERT(args->oknoent); + ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); /* * Here, we can only be doing a lookup (not a rename or replace). * If a case-insensitive match was found earlier, return success. diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c index b52903bc0b14..2ebbed4f1b0d 100644 --- a/fs/xfs/xfs_dir2_leaf.c +++ b/fs/xfs/xfs_dir2_leaf.c @@ -263,20 +263,21 @@ xfs_dir2_leaf_addname( * If we don't have enough free bytes but we can make enough * by compacting out stale entries, we'll do that. */ - if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu(leaf->hdr.count)] < needbytes && - be16_to_cpu(leaf->hdr.stale) > 1) { + if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu(leaf->hdr.count)] < + needbytes && be16_to_cpu(leaf->hdr.stale) > 1) { compact = 1; } /* * Otherwise if we don't have enough free bytes we need to * convert to node form. */ - else if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu(leaf->hdr.count)] < - needbytes) { + else if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu( + leaf->hdr.count)] < needbytes) { /* * Just checking or no space reservation, give up. */ - if (args->justcheck || args->total == 0) { + if ((args->op_flags & XFS_DA_OP_JUSTCHECK) || + args->total == 0) { xfs_da_brelse(tp, lbp); return XFS_ERROR(ENOSPC); } @@ -301,7 +302,7 @@ xfs_dir2_leaf_addname( * If just checking, then it will fit unless we needed to allocate * a new data block. */ - if (args->justcheck) { + if (args->op_flags & XFS_DA_OP_JUSTCHECK) { xfs_da_brelse(tp, lbp); return use_block == -1 ? XFS_ERROR(ENOSPC) : 0; } @@ -1414,7 +1415,7 @@ xfs_dir2_leaf_lookup_int( cbp = dbp; } } - ASSERT(args->oknoent); + ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); /* * Here, we can only be doing a lookup (not a rename or replace). * If a case-insensitive match was found earlier, release the current diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c index fedf8f976a10..c71cff85950c 100644 --- a/fs/xfs/xfs_dir2_node.c +++ b/fs/xfs/xfs_dir2_node.c @@ -226,7 +226,7 @@ xfs_dir2_leafn_add( ASSERT(index == be16_to_cpu(leaf->hdr.count) || be32_to_cpu(leaf->ents[index].hashval) >= args->hashval); - if (args->justcheck) + if (args->op_flags & XFS_DA_OP_JUSTCHECK) return 0; /* @@ -515,7 +515,7 @@ xfs_dir2_leafn_lookup_for_addname( /* Didn't find any space */ fi = -1; out: - ASSERT(args->oknoent); + ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); if (curbp) { /* Giving back a free block. */ state->extravalid = 1; @@ -638,7 +638,8 @@ xfs_dir2_leafn_lookup_for_entry( /* Didn't find an exact match. */ error = ENOENT; di = -1; - ASSERT(index == be16_to_cpu(leaf->hdr.count) || args->oknoent); + ASSERT(index == be16_to_cpu(leaf->hdr.count) || + (args->op_flags & XFS_DA_OP_OKNOENT)); out: if (curbp) { /* Giving back a data block. */ @@ -669,7 +670,7 @@ xfs_dir2_leafn_lookup_int( int *indexp, /* out: leaf entry index */ xfs_da_state_t *state) /* state to fill in */ { - if (args->addname) + if (args->op_flags & XFS_DA_OP_ADDNAME) return xfs_dir2_leafn_lookup_for_addname(bp, args, indexp, state); return xfs_dir2_leafn_lookup_for_entry(bp, args, indexp, state); @@ -1383,7 +1384,7 @@ xfs_dir2_node_addname( /* * It worked, fix the hash values up the btree. */ - if (!args->justcheck) + if (!(args->op_flags & XFS_DA_OP_JUSTCHECK)) xfs_da_fixhashpath(state, &state->path); } else { /* @@ -1566,7 +1567,8 @@ xfs_dir2_node_addname_int( /* * Not allowed to allocate, return failure. */ - if (args->justcheck || args->total == 0) { + if ((args->op_flags & XFS_DA_OP_JUSTCHECK) || + args->total == 0) { /* * Drop the freespace buffer unless it came from our * caller. @@ -1712,7 +1714,7 @@ xfs_dir2_node_addname_int( /* * If just checking, we succeeded. */ - if (args->justcheck) { + if (args->op_flags & XFS_DA_OP_JUSTCHECK) { if ((fblk == NULL || fblk->bp == NULL) && fbp != NULL) xfs_da_buf_done(fbp); return 0; diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c index dcd09cada43f..9409fd3e565f 100644 --- a/fs/xfs/xfs_dir2_sf.c +++ b/fs/xfs/xfs_dir2_sf.c @@ -332,7 +332,7 @@ xfs_dir2_sf_addname( /* * Just checking or no space reservation, it doesn't fit. */ - if (args->justcheck || args->total == 0) + if ((args->op_flags & XFS_DA_OP_JUSTCHECK) || args->total == 0) return XFS_ERROR(ENOSPC); /* * Convert to block form then add the name. @@ -345,7 +345,7 @@ xfs_dir2_sf_addname( /* * Just checking, it fits. */ - if (args->justcheck) + if (args->op_flags & XFS_DA_OP_JUSTCHECK) return 0; /* * Do it the easy way - just add it at the end. @@ -869,7 +869,7 @@ xfs_dir2_sf_lookup( return XFS_ERROR(EEXIST); } } - ASSERT(args->oknoent); + ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); /* * Here, we can only be doing a lookup (not a rename or replace). * If a case-insensitive match was found earlier, return "found". @@ -1071,7 +1071,7 @@ xfs_dir2_sf_replace( * Didn't find it. */ if (i == sfp->hdr.count) { - ASSERT(args->oknoent); + ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); #if XFS_BIG_INUMS if (i8elevated) xfs_dir2_sf_toino4(args); diff --git a/fs/xfs/xfs_dir2_trace.c b/fs/xfs/xfs_dir2_trace.c index f3fb2ffd6f5c..6cc7c0c681ac 100644 --- a/fs/xfs/xfs_dir2_trace.c +++ b/fs/xfs/xfs_dir2_trace.c @@ -85,7 +85,8 @@ xfs_dir2_trace_args( (void *)((unsigned long)(args->inumber >> 32)), (void *)((unsigned long)(args->inumber & 0xFFFFFFFF)), (void *)args->dp, (void *)args->trans, - (void *)(unsigned long)args->justcheck, NULL, NULL); + (void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK), + NULL, NULL); } void @@ -100,7 +101,7 @@ xfs_dir2_trace_args_b( (void *)((unsigned long)(args->inumber >> 32)), (void *)((unsigned long)(args->inumber & 0xFFFFFFFF)), (void *)args->dp, (void *)args->trans, - (void *)(unsigned long)args->justcheck, + (void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK), (void *)(bp ? bp->bps[0] : NULL), NULL); } @@ -117,7 +118,7 @@ xfs_dir2_trace_args_bb( (void *)((unsigned long)(args->inumber >> 32)), (void *)((unsigned long)(args->inumber & 0xFFFFFFFF)), (void *)args->dp, (void *)args->trans, - (void *)(unsigned long)args->justcheck, + (void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK), (void *)(lbp ? lbp->bps[0] : NULL), (void *)(dbp ? dbp->bps[0] : NULL)); } @@ -157,8 +158,8 @@ xfs_dir2_trace_args_db( (void *)((unsigned long)(args->inumber >> 32)), (void *)((unsigned long)(args->inumber & 0xFFFFFFFF)), (void *)args->dp, (void *)args->trans, - (void *)(unsigned long)args->justcheck, (void *)(long)db, - (void *)dbp); + (void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK), + (void *)(long)db, (void *)dbp); } void @@ -173,7 +174,7 @@ xfs_dir2_trace_args_i( (void *)((unsigned long)(args->inumber >> 32)), (void *)((unsigned long)(args->inumber & 0xFFFFFFFF)), (void *)args->dp, (void *)args->trans, - (void *)(unsigned long)args->justcheck, + (void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK), (void *)((unsigned long)(i >> 32)), (void *)((unsigned long)(i & 0xFFFFFFFF))); } @@ -190,7 +191,8 @@ xfs_dir2_trace_args_s( (void *)((unsigned long)(args->inumber >> 32)), (void *)((unsigned long)(args->inumber & 0xFFFFFFFF)), (void *)args->dp, (void *)args->trans, - (void *)(unsigned long)args->justcheck, (void *)(long)s, NULL); + (void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK), + (void *)(long)s, NULL); } void @@ -208,7 +210,7 @@ xfs_dir2_trace_args_sb( (void *)((unsigned long)(args->inumber >> 32)), (void *)((unsigned long)(args->inumber & 0xFFFFFFFF)), (void *)args->dp, (void *)args->trans, - (void *)(unsigned long)args->justcheck, (void *)(long)s, - (void *)dbp); + (void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK), + (void *)(long)s, (void *)dbp); } #endif /* XFS_DIR2_TRACE */ -- cgit v1.2.3 From 9403540c0653122ca34884a180439ddbfcbcb524 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Wed, 21 May 2008 16:50:46 +1000 Subject: dcache: Add case-insensitive support d_ci_add() routine This add a dcache entry to the dcache for lookup, but changing the name that is associated with the entry rather than the one passed in to the lookup routine. First, it sees if the case-exact match already exists in the dcache and uses it if one exists. Otherwise, it allocates a new node with the new name and splices it into the dcache. Original code from ntfs_lookup in fs/ntfs/namei.c by Anton Altaparmakov. Signed-off-by: Barry Naujok Signed-off-by: Anton Altaparmakov Acked-by: Christoph Hellwig --- fs/dcache.c | 102 +++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/dcache.h | 1 + 2 files changed, 103 insertions(+) diff --git a/fs/dcache.c b/fs/dcache.c index f2584d22cb45..101663d15e9f 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1220,6 +1220,107 @@ struct dentry *d_splice_alias(struct inode *inode, struct dentry *dentry) return new; } +/** + * d_add_ci - lookup or allocate new dentry with case-exact name + * @inode: the inode case-insensitive lookup has found + * @dentry: the negative dentry that was passed to the parent's lookup func + * @name: the case-exact name to be associated with the returned dentry + * + * This is to avoid filling the dcache with case-insensitive names to the + * same inode, only the actual correct case is stored in the dcache for + * case-insensitive filesystems. + * + * For a case-insensitive lookup match and if the the case-exact dentry + * already exists in in the dcache, use it and return it. + * + * If no entry exists with the exact case name, allocate new dentry with + * the exact case, and return the spliced entry. + */ +struct dentry *d_add_ci(struct inode *inode, struct dentry *dentry, + struct qstr *name) +{ + int error; + struct dentry *found; + struct dentry *new; + + /* Does a dentry matching the name exist already? */ + found = d_hash_and_lookup(dentry->d_parent, name); + /* If not, create it now and return */ + if (!found) { + new = d_alloc(dentry->d_parent, name); + if (!new) { + error = -ENOMEM; + goto err_out; + } + found = d_splice_alias(inode, new); + if (found) { + dput(new); + return found; + } + return new; + } + /* Matching dentry exists, check if it is negative. */ + if (found->d_inode) { + if (unlikely(found->d_inode != inode)) { + /* This can't happen because bad inodes are unhashed. */ + BUG_ON(!is_bad_inode(inode)); + BUG_ON(!is_bad_inode(found->d_inode)); + } + /* + * Already have the inode and the dentry attached, decrement + * the reference count to balance the iget() done + * earlier on. We found the dentry using d_lookup() so it + * cannot be disconnected and thus we do not need to worry + * about any NFS/disconnectedness issues here. + */ + iput(inode); + return found; + } + /* + * Negative dentry: instantiate it unless the inode is a directory and + * has a 'disconnected' dentry (i.e. IS_ROOT and DCACHE_DISCONNECTED), + * in which case d_move() that in place of the found dentry. + */ + if (!S_ISDIR(inode->i_mode)) { + /* Not a directory; everything is easy. */ + d_instantiate(found, inode); + return found; + } + spin_lock(&dcache_lock); + if (list_empty(&inode->i_dentry)) { + /* + * Directory without a 'disconnected' dentry; we need to do + * d_instantiate() by hand because it takes dcache_lock which + * we already hold. + */ + list_add(&found->d_alias, &inode->i_dentry); + found->d_inode = inode; + spin_unlock(&dcache_lock); + security_d_instantiate(found, inode); + return found; + } + /* + * Directory with a 'disconnected' dentry; get a reference to the + * 'disconnected' dentry. + */ + new = list_entry(inode->i_dentry.next, struct dentry, d_alias); + dget_locked(new); + spin_unlock(&dcache_lock); + /* Do security vodoo. */ + security_d_instantiate(found, inode); + /* Move new in place of found. */ + d_move(new, found); + /* Balance the iget() we did above. */ + iput(inode); + /* Throw away found. */ + dput(found); + /* Use new as the actual dentry. */ + return new; + +err_out: + iput(inode); + return ERR_PTR(error); +} /** * d_lookup - search for a dentry @@ -2254,6 +2355,7 @@ EXPORT_SYMBOL(d_path); EXPORT_SYMBOL(d_prune_aliases); EXPORT_SYMBOL(d_rehash); EXPORT_SYMBOL(d_splice_alias); +EXPORT_SYMBOL(d_add_ci); EXPORT_SYMBOL(d_validate); EXPORT_SYMBOL(dget_locked); EXPORT_SYMBOL(dput); diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 98202c672fde..07aa198f19ed 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -230,6 +230,7 @@ extern void d_delete(struct dentry *); extern struct dentry * d_alloc(struct dentry *, const struct qstr *); extern struct dentry * d_alloc_anon(struct inode *); extern struct dentry * d_splice_alias(struct inode *, struct dentry *); +extern struct dentry * d_add_ci(struct inode *, struct dentry *, struct qstr *); extern void shrink_dcache_sb(struct super_block *); extern void shrink_dcache_parent(struct dentry *); extern void shrink_dcache_for_umount(struct super_block *); -- cgit v1.2.3 From 384f3ced07efdddf6838f6527366089d37843c94 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Wed, 21 May 2008 16:58:22 +1000 Subject: [XFS] Return case-insensitive match for dentry cache This implements the code to store the actual filename found during a lookup in the dentry cache and to avoid multiple entries in the dcache pointing to the same inode. To avoid polluting the dcache, we implement a new directory inode operations for lookup. xfs_vn_ci_lookup() stores the correct case name in the dcache. The "actual name" is only allocated and returned for a case- insensitive match and not an actual match. Another unusual interaction with the dcache is not storing negative dentries like other filesystems doing a d_add(dentry, NULL) when an ENOENT is returned. During the VFS lookup, if a dentry returned has no inode, dput is called and ENOENT is returned. By not doing a d_add, this actually removes it completely from the dcache to be reused. create/rename have to be modified to support unhashed dentries being passed in. SGI-PV: 981521 SGI-Modid: xfs-linux-melb:xfs-kern:31208a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig --- fs/xfs/linux-2.6/xfs_export.c | 2 +- fs/xfs/linux-2.6/xfs_iops.c | 57 ++++++++++++++++++++++++++++++++++++++++++- fs/xfs/linux-2.6/xfs_iops.h | 1 + fs/xfs/xfs_da_btree.h | 1 + fs/xfs/xfs_dir2.c | 40 ++++++++++++++++++++++++++++-- fs/xfs/xfs_dir2.h | 6 ++++- fs/xfs/xfs_dir2_block.c | 9 ++++--- fs/xfs/xfs_dir2_leaf.c | 5 ++-- fs/xfs/xfs_dir2_node.c | 16 ++++++++---- fs/xfs/xfs_dir2_sf.c | 17 +++++++------ fs/xfs/xfs_vnodeops.c | 19 +++++++++++---- fs/xfs/xfs_vnodeops.h | 2 +- 12 files changed, 146 insertions(+), 29 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_export.c b/fs/xfs/linux-2.6/xfs_export.c index c672b3238b14..987fe84f7b13 100644 --- a/fs/xfs/linux-2.6/xfs_export.c +++ b/fs/xfs/linux-2.6/xfs_export.c @@ -215,7 +215,7 @@ xfs_fs_get_parent( struct xfs_inode *cip; struct dentry *parent; - error = xfs_lookup(XFS_I(child->d_inode), &xfs_name_dotdot, &cip); + error = xfs_lookup(XFS_I(child->d_inode), &xfs_name_dotdot, &cip, NULL); if (unlikely(error)) return ERR_PTR(-error); diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 13b6cfd366c2..9f0f8ee8d44d 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -382,7 +382,7 @@ xfs_vn_lookup( return ERR_PTR(-ENAMETOOLONG); xfs_dentry_to_name(&name, dentry); - error = xfs_lookup(XFS_I(dir), &name, &cip); + error = xfs_lookup(XFS_I(dir), &name, &cip, NULL); if (unlikely(error)) { if (unlikely(error != ENOENT)) return ERR_PTR(-error); @@ -393,6 +393,42 @@ xfs_vn_lookup( return d_splice_alias(cip->i_vnode, dentry); } +STATIC struct dentry * +xfs_vn_ci_lookup( + struct inode *dir, + struct dentry *dentry, + struct nameidata *nd) +{ + struct xfs_inode *ip; + struct xfs_name xname; + struct xfs_name ci_name; + struct qstr dname; + int error; + + if (dentry->d_name.len >= MAXNAMELEN) + return ERR_PTR(-ENAMETOOLONG); + + xfs_dentry_to_name(&xname, dentry); + error = xfs_lookup(XFS_I(dir), &xname, &ip, &ci_name); + if (unlikely(error)) { + if (unlikely(error != ENOENT)) + return ERR_PTR(-error); + d_add(dentry, NULL); + return NULL; + } + + /* if exact match, just splice and exit */ + if (!ci_name.name) + return d_splice_alias(ip->i_vnode, dentry); + + /* else case-insensitive match... */ + dname.name = ci_name.name; + dname.len = ci_name.len; + dentry = d_add_ci(ip->i_vnode, dentry, &dname); + kmem_free(ci_name.name); + return dentry; +} + STATIC int xfs_vn_link( struct dentry *old_dentry, @@ -892,6 +928,25 @@ const struct inode_operations xfs_dir_inode_operations = { .removexattr = xfs_vn_removexattr, }; +const struct inode_operations xfs_dir_ci_inode_operations = { + .create = xfs_vn_create, + .lookup = xfs_vn_ci_lookup, + .link = xfs_vn_link, + .unlink = xfs_vn_unlink, + .symlink = xfs_vn_symlink, + .mkdir = xfs_vn_mkdir, + .rmdir = xfs_vn_rmdir, + .mknod = xfs_vn_mknod, + .rename = xfs_vn_rename, + .permission = xfs_vn_permission, + .getattr = xfs_vn_getattr, + .setattr = xfs_vn_setattr, + .setxattr = xfs_vn_setxattr, + .getxattr = xfs_vn_getxattr, + .listxattr = xfs_vn_listxattr, + .removexattr = xfs_vn_removexattr, +}; + const struct inode_operations xfs_symlink_inode_operations = { .readlink = generic_readlink, .follow_link = xfs_vn_follow_link, diff --git a/fs/xfs/linux-2.6/xfs_iops.h b/fs/xfs/linux-2.6/xfs_iops.h index 14d0deb7afff..3b4df5863e4a 100644 --- a/fs/xfs/linux-2.6/xfs_iops.h +++ b/fs/xfs/linux-2.6/xfs_iops.h @@ -20,6 +20,7 @@ extern const struct inode_operations xfs_inode_operations; extern const struct inode_operations xfs_dir_inode_operations; +extern const struct inode_operations xfs_dir_ci_inode_operations; extern const struct inode_operations xfs_symlink_inode_operations; extern const struct file_operations xfs_file_operations; diff --git a/fs/xfs/xfs_da_btree.h b/fs/xfs/xfs_da_btree.h index 8face64c11fb..8be0b00ede9a 100644 --- a/fs/xfs/xfs_da_btree.h +++ b/fs/xfs/xfs_da_btree.h @@ -143,6 +143,7 @@ typedef struct xfs_da_args { #define XFS_DA_OP_RENAME 0x0002 /* this is an atomic rename op */ #define XFS_DA_OP_ADDNAME 0x0004 /* this is an add operation */ #define XFS_DA_OP_OKNOENT 0x0008 /* lookup/add op, ENOENT ok, else die */ +#define XFS_DA_OP_CILOOKUP 0x0010 /* lookup to return CI name if found */ /* * Structure to describe buffer(s) for a block. diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c index 3387acd3e471..882609c699c8 100644 --- a/fs/xfs/xfs_dir2.c +++ b/fs/xfs/xfs_dir2.c @@ -192,15 +192,44 @@ xfs_dir_createname( return rval; } +/* + * If doing a CI lookup and case-insensitive match, dup actual name into + * args.value. Return EEXIST for success (ie. name found) or an error. + */ +int +xfs_dir_cilookup_result( + struct xfs_da_args *args, + const char *name, + int len) +{ + if (args->cmpresult == XFS_CMP_DIFFERENT) + return ENOENT; + if (args->cmpresult != XFS_CMP_CASE || + !(args->op_flags & XFS_DA_OP_CILOOKUP)) + return EEXIST; + + args->value = kmem_alloc(len, KM_MAYFAIL); + if (!args->value) + return ENOMEM; + + memcpy(args->value, name, len); + args->valuelen = len; + return EEXIST; +} + /* * Lookup a name in a directory, give back the inode number. + * If ci_name is not NULL, returns the actual name in ci_name if it differs + * to name, or ci_name->name is set to NULL for an exact match. */ + int xfs_dir_lookup( xfs_trans_t *tp, xfs_inode_t *dp, struct xfs_name *name, - xfs_ino_t *inum) /* out: inode number */ + xfs_ino_t *inum, /* out: inode number */ + struct xfs_name *ci_name) /* out: actual name if CI match */ { xfs_da_args_t args; int rval; @@ -217,6 +246,8 @@ xfs_dir_lookup( args.whichfork = XFS_DATA_FORK; args.trans = tp; args.op_flags = XFS_DA_OP_OKNOENT; + if (ci_name) + args.op_flags |= XFS_DA_OP_CILOOKUP; args.cmpresult = XFS_CMP_DIFFERENT; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) @@ -233,8 +264,13 @@ xfs_dir_lookup( rval = xfs_dir2_node_lookup(&args); if (rval == EEXIST) rval = 0; - if (rval == 0) + if (!rval) { *inum = args.inumber; + if (ci_name) { + ci_name->name = args.value; + ci_name->len = args.valuelen; + } + } return rval; } diff --git a/fs/xfs/xfs_dir2.h b/fs/xfs/xfs_dir2.h index 6392f939029f..1d9ef96f33aa 100644 --- a/fs/xfs/xfs_dir2.h +++ b/fs/xfs/xfs_dir2.h @@ -74,7 +74,8 @@ extern int xfs_dir_createname(struct xfs_trans *tp, struct xfs_inode *dp, xfs_fsblock_t *first, struct xfs_bmap_free *flist, xfs_extlen_t tot); extern int xfs_dir_lookup(struct xfs_trans *tp, struct xfs_inode *dp, - struct xfs_name *name, xfs_ino_t *inum); + struct xfs_name *name, xfs_ino_t *inum, + struct xfs_name *ci_name); extern int xfs_dir_removename(struct xfs_trans *tp, struct xfs_inode *dp, struct xfs_name *name, xfs_ino_t ino, xfs_fsblock_t *first, @@ -99,4 +100,7 @@ extern int xfs_dir2_isleaf(struct xfs_trans *tp, struct xfs_inode *dp, extern int xfs_dir2_shrink_inode(struct xfs_da_args *args, xfs_dir2_db_t db, struct xfs_dabuf *bp); +extern int xfs_dir_cilookup_result(struct xfs_da_args *args, const char *name, + int len); + #endif /* __XFS_DIR2_H__ */ diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c index dee225918db2..e2fa0a1d8e96 100644 --- a/fs/xfs/xfs_dir2_block.c +++ b/fs/xfs/xfs_dir2_block.c @@ -610,14 +610,15 @@ xfs_dir2_block_lookup( /* * Get the offset from the leaf entry, to point to the data. */ - dep = (xfs_dir2_data_entry_t *) - ((char *)block + xfs_dir2_dataptr_to_off(mp, be32_to_cpu(blp[ent].address))); + dep = (xfs_dir2_data_entry_t *)((char *)block + + xfs_dir2_dataptr_to_off(mp, be32_to_cpu(blp[ent].address))); /* - * Fill in inode number, release the block. + * Fill in inode number, CI name if appropriate, release the block. */ args->inumber = be64_to_cpu(dep->inumber); + error = xfs_dir_cilookup_result(args, dep->name, dep->namelen); xfs_da_brelse(args->trans, bp); - return XFS_ERROR(EEXIST); + return XFS_ERROR(error); } /* diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c index 2ebbed4f1b0d..f110242d6dfc 100644 --- a/fs/xfs/xfs_dir2_leaf.c +++ b/fs/xfs/xfs_dir2_leaf.c @@ -1299,12 +1299,13 @@ xfs_dir2_leaf_lookup( ((char *)dbp->data + xfs_dir2_dataptr_to_off(dp->i_mount, be32_to_cpu(lep->address))); /* - * Return the found inode number. + * Return the found inode number & CI name if appropriate */ args->inumber = be64_to_cpu(dep->inumber); + error = xfs_dir_cilookup_result(args, dep->name, dep->namelen); xfs_da_brelse(tp, dbp); xfs_da_brelse(tp, lbp); - return XFS_ERROR(EEXIST); + return XFS_ERROR(error); } /* diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c index c71cff85950c..1b5430223461 100644 --- a/fs/xfs/xfs_dir2_node.c +++ b/fs/xfs/xfs_dir2_node.c @@ -549,7 +549,7 @@ xfs_dir2_leafn_lookup_for_entry( xfs_dir2_data_entry_t *dep; /* data block entry */ xfs_inode_t *dp; /* incore directory inode */ int error; /* error return value */ - int di; /* data entry index */ + int di = -1; /* data entry index */ int index; /* leaf entry index */ xfs_dir2_leaf_t *leaf; /* leaf structure */ xfs_dir2_leaf_entry_t *lep; /* leaf entry */ @@ -577,6 +577,7 @@ xfs_dir2_leafn_lookup_for_entry( if (state->extravalid) { curbp = state->extrablk.bp; curdb = state->extrablk.blkno; + di = state->extrablk.index; } /* * Loop over leaf entries with the right hash value. @@ -637,7 +638,6 @@ xfs_dir2_leafn_lookup_for_entry( } /* Didn't find an exact match. */ error = ENOENT; - di = -1; ASSERT(index == be16_to_cpu(leaf->hdr.count) || (args->op_flags & XFS_DA_OP_OKNOENT)); out: @@ -652,7 +652,7 @@ out: state->extravalid = 0; } /* - * Return the index, that will be the insertion point. + * Return the index, that will be the deletion point for remove/replace. */ *indexp = index; return XFS_ERROR(error); @@ -1820,8 +1820,14 @@ xfs_dir2_node_lookup( error = xfs_da_node_lookup_int(state, &rval); if (error) rval = error; - else if (rval == ENOENT && args->cmpresult == XFS_CMP_CASE) - rval = EEXIST; /* a case-insensitive match was found */ + else if (rval == ENOENT && args->cmpresult == XFS_CMP_CASE) { + /* If a CI match, dup the actual name and return EEXIST */ + xfs_dir2_data_entry_t *dep; + + dep = (xfs_dir2_data_entry_t *)((char *)state->extrablk.bp-> + data + state->extrablk.index); + rval = xfs_dir_cilookup_result(args, dep->name, dep->namelen); + } /* * Release the btree blocks and leaf block. */ diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c index 9409fd3e565f..b46af0013ec9 100644 --- a/fs/xfs/xfs_dir2_sf.c +++ b/fs/xfs/xfs_dir2_sf.c @@ -812,9 +812,11 @@ xfs_dir2_sf_lookup( { xfs_inode_t *dp; /* incore directory inode */ int i; /* entry index */ + int error; xfs_dir2_sf_entry_t *sfep; /* shortform directory entry */ xfs_dir2_sf_t *sfp; /* shortform structure */ enum xfs_dacmp cmp; /* comparison result */ + xfs_dir2_sf_entry_t *ci_sfep; /* case-insens. entry */ xfs_dir2_trace_args("sf_lookup", args); xfs_dir2_sf_check(args); @@ -852,6 +854,7 @@ xfs_dir2_sf_lookup( /* * Loop over all the entries trying to match ours. */ + ci_sfep = NULL; for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->hdr.count; i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) { /* @@ -867,19 +870,19 @@ xfs_dir2_sf_lookup( xfs_dir2_sf_inumberp(sfep)); if (cmp == XFS_CMP_EXACT) return XFS_ERROR(EEXIST); + ci_sfep = sfep; } } ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); /* * Here, we can only be doing a lookup (not a rename or replace). - * If a case-insensitive match was found earlier, return "found". + * If a case-insensitive match was not found, return ENOENT. */ - if (args->cmpresult == XFS_CMP_CASE) - return XFS_ERROR(EEXIST); - /* - * Didn't find it. - */ - return XFS_ERROR(ENOENT); + if (!ci_sfep) + return XFS_ERROR(ENOENT); + /* otherwise process the CI match as required by the caller */ + error = xfs_dir_cilookup_result(args, ci_sfep->name, ci_sfep->namelen); + return XFS_ERROR(error); } /* diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 9b8b87fcd4ec..b6a065eb25a5 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -1610,12 +1610,18 @@ xfs_inactive( return VN_INACTIVE_CACHE; } - +/* + * Lookups up an inode from "name". If ci_name is not NULL, then a CI match + * is allowed, otherwise it has to be an exact match. If a CI match is found, + * ci_name->name will point to a the actual name (caller must free) or + * will be set to NULL if an exact match is found. + */ int xfs_lookup( xfs_inode_t *dp, struct xfs_name *name, - xfs_inode_t **ipp) + xfs_inode_t **ipp, + struct xfs_name *ci_name) { xfs_ino_t inum; int error; @@ -1627,7 +1633,7 @@ xfs_lookup( return XFS_ERROR(EIO); lock_mode = xfs_ilock_map_shared(dp); - error = xfs_dir_lookup(NULL, dp, name, &inum); + error = xfs_dir_lookup(NULL, dp, name, &inum, ci_name); xfs_iunlock_map_shared(dp, lock_mode); if (error) @@ -1635,12 +1641,15 @@ xfs_lookup( error = xfs_iget(dp->i_mount, NULL, inum, 0, 0, ipp, 0); if (error) - goto out; + goto out_free_name; xfs_itrace_ref(*ipp); return 0; - out: +out_free_name: + if (ci_name) + kmem_free(ci_name->name); +out: *ipp = NULL; return error; } diff --git a/fs/xfs/xfs_vnodeops.h b/fs/xfs/xfs_vnodeops.h index 57335ba4ce53..7e9a8b241f21 100644 --- a/fs/xfs/xfs_vnodeops.h +++ b/fs/xfs/xfs_vnodeops.h @@ -22,7 +22,7 @@ int xfs_fsync(struct xfs_inode *ip); int xfs_release(struct xfs_inode *ip); int xfs_inactive(struct xfs_inode *ip); int xfs_lookup(struct xfs_inode *dp, struct xfs_name *name, - struct xfs_inode **ipp); + struct xfs_inode **ipp, struct xfs_name *ci_name); int xfs_create(struct xfs_inode *dp, struct xfs_name *name, mode_t mode, xfs_dev_t rdev, struct xfs_inode **ipp, struct cred *credp); int xfs_remove(struct xfs_inode *dp, struct xfs_name *name, -- cgit v1.2.3 From 189f4bf22bdc3c2402b038016d11fd3cb1c89f07 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Wed, 21 May 2008 16:58:55 +1000 Subject: [XFS] XFS: ASCII case-insensitive support Implement ASCII case-insensitive support. It's primary purpose is for supporting existing filesystems that already use this case-insensitive mode migrated from IRIX. But, if you only need ASCII-only case-insensitive support (ie. English only) and will never use another language, then this mode is perfectly adequate. ASCII-CI is implemented by generating hashes based on lower-case letters and doing lower-case compares. It implements a new xfs_nameops vector for doing the hashes and comparisons for all filename operations. To create a filesystem with this CI mode, use: # mkfs.xfs -n version=ci SGI-PV: 981516 SGI-Modid: xfs-linux-melb:xfs-kern:31209a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig --- fs/xfs/linux-2.6/xfs_linux.h | 1 + fs/xfs/linux-2.6/xfs_super.c | 5 ++++- fs/xfs/xfs_dir2.c | 51 +++++++++++++++++++++++++++++++++++++++++++- fs/xfs/xfs_fs.h | 1 + fs/xfs/xfs_fsops.c | 4 +++- fs/xfs/xfs_sb.h | 10 ++++++++- 6 files changed, 68 insertions(+), 4 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_linux.h b/fs/xfs/linux-2.6/xfs_linux.h index 4edc46915b57..aded57321b12 100644 --- a/fs/xfs/linux-2.6/xfs_linux.h +++ b/fs/xfs/linux-2.6/xfs_linux.h @@ -76,6 +76,7 @@ #include #include #include +#include #include #include diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 41eea24a46e4..cce59cc6e748 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -569,7 +569,10 @@ xfs_set_inodeops( inode->i_mapping->a_ops = &xfs_address_space_operations; break; case S_IFDIR: - inode->i_op = &xfs_dir_inode_operations; + if (xfs_sb_version_hasasciici(&XFS_M(inode->i_sb)->m_sb)) + inode->i_op = &xfs_dir_ci_inode_operations; + else + inode->i_op = &xfs_dir_inode_operations; inode->i_fop = &xfs_dir_file_operations; break; case S_IFLNK: diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c index 882609c699c8..b445ec314764 100644 --- a/fs/xfs/xfs_dir2.c +++ b/fs/xfs/xfs_dir2.c @@ -48,6 +48,52 @@ struct xfs_name xfs_name_dotdot = {"..", 2}; extern const struct xfs_nameops xfs_default_nameops; +/* + * ASCII case-insensitive (ie. A-Z) support for directories that was + * used in IRIX. + */ +STATIC xfs_dahash_t +xfs_ascii_ci_hashname( + struct xfs_name *name) +{ + xfs_dahash_t hash; + int i; + + for (i = 0, hash = 0; i < name->len; i++) + hash = tolower(name->name[i]) ^ rol32(hash, 7); + + return hash; +} + +STATIC enum xfs_dacmp +xfs_ascii_ci_compname( + struct xfs_da_args *args, + const char *name, + int len) +{ + enum xfs_dacmp result; + int i; + + if (args->namelen != len) + return XFS_CMP_DIFFERENT; + + result = XFS_CMP_EXACT; + for (i = 0; i < len; i++) { + if (args->name[i] == name[i]) + continue; + if (tolower(args->name[i]) != tolower(name[i])) + return XFS_CMP_DIFFERENT; + result = XFS_CMP_CASE; + } + + return result; +} + +static struct xfs_nameops xfs_ascii_ci_nameops = { + .hashname = xfs_ascii_ci_hashname, + .compname = xfs_ascii_ci_compname, +}; + void xfs_dir_mount( xfs_mount_t *mp) @@ -67,7 +113,10 @@ xfs_dir_mount( (mp->m_dirblksize - (uint)sizeof(xfs_da_node_hdr_t)) / (uint)sizeof(xfs_da_node_entry_t); mp->m_dir_magicpct = (mp->m_dirblksize * 37) / 100; - mp->m_dirnameops = &xfs_default_nameops; + if (xfs_sb_version_hasasciici(&mp->m_sb)) + mp->m_dirnameops = &xfs_ascii_ci_nameops; + else + mp->m_dirnameops = &xfs_default_nameops; } /* diff --git a/fs/xfs/xfs_fs.h b/fs/xfs/xfs_fs.h index 3bed6433d050..6ca749897c58 100644 --- a/fs/xfs/xfs_fs.h +++ b/fs/xfs/xfs_fs.h @@ -239,6 +239,7 @@ typedef struct xfs_fsop_resblks { #define XFS_FSOP_GEOM_FLAGS_LOGV2 0x0100 /* log format version 2 */ #define XFS_FSOP_GEOM_FLAGS_SECTOR 0x0200 /* sector sizes >1BB */ #define XFS_FSOP_GEOM_FLAGS_ATTR2 0x0400 /* inline attributes rework */ +#define XFS_FSOP_GEOM_FLAGS_DIRV2CI 0x1000 /* ASCII only CI names */ #define XFS_FSOP_GEOM_FLAGS_LAZYSB 0x4000 /* lazy superblock counters */ diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c index 381ebda4f7bc..84583cf73db3 100644 --- a/fs/xfs/xfs_fsops.c +++ b/fs/xfs/xfs_fsops.c @@ -95,6 +95,8 @@ xfs_fs_geometry( XFS_FSOP_GEOM_FLAGS_DIRV2 : 0) | (xfs_sb_version_hassector(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_SECTOR : 0) | + (xfs_sb_version_hasasciici(&mp->m_sb) ? + XFS_FSOP_GEOM_FLAGS_DIRV2CI : 0) | (xfs_sb_version_haslazysbcount(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_LAZYSB : 0) | (xfs_sb_version_hasattr2(&mp->m_sb) ? @@ -625,7 +627,7 @@ xfs_fs_goingdown( xfs_force_shutdown(mp, SHUTDOWN_FORCE_UMOUNT); thaw_bdev(sb->s_bdev, sb); } - + break; } case XFS_FSOP_GOING_FLAGS_LOGFLUSH: diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h index e3204a36a222..3f8cf1587f4c 100644 --- a/fs/xfs/xfs_sb.h +++ b/fs/xfs/xfs_sb.h @@ -46,10 +46,12 @@ struct xfs_mount; #define XFS_SB_VERSION_SECTORBIT 0x0800 #define XFS_SB_VERSION_EXTFLGBIT 0x1000 #define XFS_SB_VERSION_DIRV2BIT 0x2000 +#define XFS_SB_VERSION_BORGBIT 0x4000 /* ASCII only case-insens. */ #define XFS_SB_VERSION_MOREBITSBIT 0x8000 #define XFS_SB_VERSION_OKSASHFBITS \ (XFS_SB_VERSION_EXTFLGBIT | \ - XFS_SB_VERSION_DIRV2BIT) + XFS_SB_VERSION_DIRV2BIT | \ + XFS_SB_VERSION_BORGBIT) #define XFS_SB_VERSION_OKREALFBITS \ (XFS_SB_VERSION_ATTRBIT | \ XFS_SB_VERSION_NLINKBIT | \ @@ -437,6 +439,12 @@ static inline int xfs_sb_version_hassector(xfs_sb_t *sbp) ((sbp)->sb_versionnum & XFS_SB_VERSION_SECTORBIT); } +static inline int xfs_sb_version_hasasciici(xfs_sb_t *sbp) +{ + return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \ + (sbp->sb_versionnum & XFS_SB_VERSION_BORGBIT); +} + static inline int xfs_sb_version_hasmorebits(xfs_sb_t *sbp) { return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \ -- cgit v1.2.3 From d3689d7687dbbc46c5004557d53349f6952fbc93 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Wed, 21 May 2008 18:38:40 +1000 Subject: [XFS] kmem_free and kmem_realloc to use const void * SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31212a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig --- fs/xfs/linux-2.6/kmem.c | 4 ++-- fs/xfs/linux-2.6/kmem.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/xfs/linux-2.6/kmem.c b/fs/xfs/linux-2.6/kmem.c index 69233a52f0a6..1cd3b55ee3d2 100644 --- a/fs/xfs/linux-2.6/kmem.c +++ b/fs/xfs/linux-2.6/kmem.c @@ -90,7 +90,7 @@ kmem_zalloc_greedy(size_t *size, size_t minsize, size_t maxsize, } void -kmem_free(void *ptr) +kmem_free(const void *ptr) { if (!is_vmalloc_addr(ptr)) { kfree(ptr); @@ -100,7 +100,7 @@ kmem_free(void *ptr) } void * -kmem_realloc(void *ptr, size_t newsize, size_t oldsize, +kmem_realloc(const void *ptr, size_t newsize, size_t oldsize, unsigned int __nocast flags) { void *new; diff --git a/fs/xfs/linux-2.6/kmem.h b/fs/xfs/linux-2.6/kmem.h index a3c96207e60e..af6843c7ee4b 100644 --- a/fs/xfs/linux-2.6/kmem.h +++ b/fs/xfs/linux-2.6/kmem.h @@ -57,8 +57,8 @@ kmem_flags_convert(unsigned int __nocast flags) extern void *kmem_alloc(size_t, unsigned int __nocast); extern void *kmem_zalloc(size_t, unsigned int __nocast); extern void *kmem_zalloc_greedy(size_t *, size_t, size_t, unsigned int __nocast); -extern void *kmem_realloc(void *, size_t, size_t, unsigned int __nocast); -extern void kmem_free(void *); +extern void *kmem_realloc(const void *, size_t, size_t, unsigned int __nocast); +extern void kmem_free(const void *); /* * Zone interfaces -- cgit v1.2.3 From 866d5dc974682c6247d5fde94dbc6545f864e7d7 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Thu, 22 May 2008 17:21:40 +1000 Subject: [XFS] Remove d_add call for an ENOENT lookup return code SGI-PV: 981521 SGI-Modid: xfs-linux-melb:xfs-kern:31214a Signed-off-by: Barry Naujok Signed-off-by: David Chinner --- fs/xfs/linux-2.6/xfs_iops.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 9f0f8ee8d44d..62330f283951 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -413,7 +413,11 @@ xfs_vn_ci_lookup( if (unlikely(error)) { if (unlikely(error != ENOENT)) return ERR_PTR(-error); - d_add(dentry, NULL); + /* + * call d_add(dentry, NULL) here when d_drop_negative_children + * is called in xfs_vn_mknod (ie. allow negative dentries + * with CI filesystems). + */ return NULL; } -- cgit v1.2.3 From 87affd08bc9c741b99053cabb908cf54a135a0fa Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Tue, 3 Jun 2008 11:59:18 +1000 Subject: [XFS] Zero uninitialised xfs_da_args structure in xfs_dir2.c Fixes a problem in the xfs_dir2_remove and xfs_dir2_replace paths which intenally call directory format specific lookup funtions that assume args->cmpresult is zeroed. SGI-PV: 982606 SGI-Modid: xfs-linux-melb:xfs-kern:31268a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_dir2.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c index b445ec314764..80e0dc51361c 100644 --- a/fs/xfs/xfs_dir2.c +++ b/fs/xfs/xfs_dir2.c @@ -214,6 +214,7 @@ xfs_dir_createname( return rval; XFS_STATS_INC(xs_dir_create); + memset(&args, 0, sizeof(xfs_da_args_t)); args.name = name->name; args.namelen = name->len; args.hashval = dp->i_mount->m_dirnameops->hashname(name); @@ -286,8 +287,8 @@ xfs_dir_lookup( ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR); XFS_STATS_INC(xs_dir_lookup); - memset(&args, 0, sizeof(xfs_da_args_t)); + memset(&args, 0, sizeof(xfs_da_args_t)); args.name = name->name; args.namelen = name->len; args.hashval = dp->i_mount->m_dirnameops->hashname(name); @@ -297,7 +298,6 @@ xfs_dir_lookup( args.op_flags = XFS_DA_OP_OKNOENT; if (ci_name) args.op_flags |= XFS_DA_OP_CILOOKUP; - args.cmpresult = XFS_CMP_DIFFERENT; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_lookup(&args); @@ -343,6 +343,7 @@ xfs_dir_removename( ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR); XFS_STATS_INC(xs_dir_remove); + memset(&args, 0, sizeof(xfs_da_args_t)); args.name = name->name; args.namelen = name->len; args.hashval = dp->i_mount->m_dirnameops->hashname(name); @@ -353,7 +354,6 @@ xfs_dir_removename( args.total = total; args.whichfork = XFS_DATA_FORK; args.trans = tp; - args.op_flags = 0; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_removename(&args); @@ -426,6 +426,7 @@ xfs_dir_replace( if ((rval = xfs_dir_ino_validate(tp->t_mountp, inum))) return rval; + memset(&args, 0, sizeof(xfs_da_args_t)); args.name = name->name; args.namelen = name->len; args.hashval = dp->i_mount->m_dirnameops->hashname(name); @@ -436,7 +437,6 @@ xfs_dir_replace( args.total = total; args.whichfork = XFS_DATA_FORK; args.trans = tp; - args.op_flags = 0; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_replace(&args); @@ -472,8 +472,8 @@ xfs_dir_canenter( return 0; ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR); - memset(&args, 0, sizeof(xfs_da_args_t)); + memset(&args, 0, sizeof(xfs_da_args_t)); args.name = name->name; args.namelen = name->len; args.hashval = dp->i_mount->m_dirnameops->hashname(name); -- cgit v1.2.3 From d532506cd8b59543b376e155508f88a03a81dad1 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Mon, 16 Jun 2008 12:07:41 +1000 Subject: [XFS] Invalidate dentry in unlink/rmdir if in case-insensitive mode The vfs_unlink/d_delete functionality in the Linux VFS make the dentry negative if it is the only inode being referenced. Case-insensitive mode doesn't work with negative dentries, so if using CI-mode, invalidate the dentry on unlink/rmdir. SGI-PV: 983102 SGI-Modid: xfs-linux-melb:xfs-kern:31308a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig --- fs/xfs/linux-2.6/xfs_iops.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 62330f283951..190ed61bcd42 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -475,6 +475,13 @@ xfs_vn_unlink( if (likely(!error)) { xfs_validate_fields(dir); /* size needs update */ xfs_validate_fields(inode); + /* + * With unlink, the VFS makes the dentry "negative": no inode, + * but still hashed. This is incompatible with case-insensitive + * mode, so invalidate (unhash) the dentry in CI-mode. + */ + if (xfs_sb_version_hasasciici(&XFS_M(dir->i_sb)->m_sb)) + d_invalidate(dentry); } return -error; } @@ -531,6 +538,13 @@ xfs_vn_rmdir( if (likely(!error)) { xfs_validate_fields(inode); xfs_validate_fields(dir); + /* + * With rmdir, the VFS makes the dentry "negative": no inode, + * but still hashed. This is incompatible with case-insensitive + * mode, so invalidate (unhash) the dentry in CI-mode. + */ + if (xfs_sb_version_hasasciici(&XFS_M(dir->i_sb)->m_sb)) + d_invalidate(dentry); } return -error; } -- cgit v1.2.3 From 0ec585163ac81e329bde25fb6311a043a1c63952 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Mon, 23 Jun 2008 13:23:01 +1000 Subject: [XFS] Use the generic xattr methods. Use the generic set, get and removexattr methods and supply the s_xattr array with fine-grained handlers. All XFS/Linux highlevel attr handling is rewritten from scratch and placed into fs/xfs/linux-2.6/xfs_xattr.c so that it's separated from the generic low-level code. SGI-PV: 982343 SGI-Modid: xfs-linux-melb:xfs-kern:31234a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/Makefile | 3 +- fs/xfs/linux-2.6/xfs_iops.c | 118 +++---------------- fs/xfs/linux-2.6/xfs_iops.h | 1 + fs/xfs/linux-2.6/xfs_super.c | 1 + fs/xfs/linux-2.6/xfs_super.h | 1 + fs/xfs/xfs_attr.c | 272 ------------------------------------------- fs/xfs/xfs_attr.h | 17 --- 7 files changed, 18 insertions(+), 395 deletions(-) diff --git a/fs/xfs/Makefile b/fs/xfs/Makefile index 36ec614e699a..737c9a425361 100644 --- a/fs/xfs/Makefile +++ b/fs/xfs/Makefile @@ -106,7 +106,8 @@ xfs-y += $(addprefix $(XFS_LINUX)/, \ xfs_iops.o \ xfs_lrw.o \ xfs_super.o \ - xfs_vnode.o) + xfs_vnode.o \ + xfs_xattr.o) # Objects in support/ xfs-y += $(addprefix support/, \ diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 190ed61bcd42..3ae80155de3a 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -275,7 +275,7 @@ xfs_vn_mknod( struct xfs_inode *ip = NULL; xfs_acl_t *default_acl = NULL; struct xfs_name name; - attrexists_t test_default_acl = _ACL_DEFAULT_EXISTS; + int (*test_default_acl)(struct inode *) = _ACL_DEFAULT_EXISTS; int error; /* @@ -781,98 +781,6 @@ xfs_vn_truncate( WARN_ON(error); } -STATIC int -xfs_vn_setxattr( - struct dentry *dentry, - const char *name, - const void *data, - size_t size, - int flags) -{ - bhv_vnode_t *vp = vn_from_inode(dentry->d_inode); - char *attr = (char *)name; - attrnames_t *namesp; - int xflags = 0; - - namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT); - if (!namesp) - return -EOPNOTSUPP; - attr += namesp->attr_namelen; - - /* Convert Linux syscall to XFS internal ATTR flags */ - if (flags & XATTR_CREATE) - xflags |= ATTR_CREATE; - if (flags & XATTR_REPLACE) - xflags |= ATTR_REPLACE; - xflags |= namesp->attr_flag; - return namesp->attr_set(vp, attr, (void *)data, size, xflags); -} - -STATIC ssize_t -xfs_vn_getxattr( - struct dentry *dentry, - const char *name, - void *data, - size_t size) -{ - bhv_vnode_t *vp = vn_from_inode(dentry->d_inode); - char *attr = (char *)name; - attrnames_t *namesp; - int xflags = 0; - - namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT); - if (!namesp) - return -EOPNOTSUPP; - attr += namesp->attr_namelen; - - /* Convert Linux syscall to XFS internal ATTR flags */ - if (!size) { - xflags |= ATTR_KERNOVAL; - data = NULL; - } - xflags |= namesp->attr_flag; - return namesp->attr_get(vp, attr, (void *)data, size, xflags); -} - -STATIC ssize_t -xfs_vn_listxattr( - struct dentry *dentry, - char *data, - size_t size) -{ - bhv_vnode_t *vp = vn_from_inode(dentry->d_inode); - int error, xflags = ATTR_KERNAMELS; - ssize_t result; - - if (!size) - xflags |= ATTR_KERNOVAL; - xflags |= capable(CAP_SYS_ADMIN) ? ATTR_KERNFULLS : ATTR_KERNORMALS; - - error = attr_generic_list(vp, data, size, xflags, &result); - if (error < 0) - return error; - return result; -} - -STATIC int -xfs_vn_removexattr( - struct dentry *dentry, - const char *name) -{ - bhv_vnode_t *vp = vn_from_inode(dentry->d_inode); - char *attr = (char *)name; - attrnames_t *namesp; - int xflags = 0; - - namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT); - if (!namesp) - return -EOPNOTSUPP; - attr += namesp->attr_namelen; - - xflags |= namesp->attr_flag; - return namesp->attr_remove(vp, attr, xflags); -} - STATIC long xfs_vn_fallocate( struct inode *inode, @@ -920,10 +828,10 @@ const struct inode_operations xfs_inode_operations = { .truncate = xfs_vn_truncate, .getattr = xfs_vn_getattr, .setattr = xfs_vn_setattr, - .setxattr = xfs_vn_setxattr, - .getxattr = xfs_vn_getxattr, + .setxattr = generic_setxattr, + .getxattr = generic_getxattr, + .removexattr = generic_removexattr, .listxattr = xfs_vn_listxattr, - .removexattr = xfs_vn_removexattr, .fallocate = xfs_vn_fallocate, }; @@ -940,10 +848,10 @@ const struct inode_operations xfs_dir_inode_operations = { .permission = xfs_vn_permission, .getattr = xfs_vn_getattr, .setattr = xfs_vn_setattr, - .setxattr = xfs_vn_setxattr, - .getxattr = xfs_vn_getxattr, + .setxattr = generic_setxattr, + .getxattr = generic_getxattr, + .removexattr = generic_removexattr, .listxattr = xfs_vn_listxattr, - .removexattr = xfs_vn_removexattr, }; const struct inode_operations xfs_dir_ci_inode_operations = { @@ -959,10 +867,10 @@ const struct inode_operations xfs_dir_ci_inode_operations = { .permission = xfs_vn_permission, .getattr = xfs_vn_getattr, .setattr = xfs_vn_setattr, - .setxattr = xfs_vn_setxattr, - .getxattr = xfs_vn_getxattr, + .setxattr = generic_setxattr, + .getxattr = generic_getxattr, + .removexattr = generic_removexattr, .listxattr = xfs_vn_listxattr, - .removexattr = xfs_vn_removexattr, }; const struct inode_operations xfs_symlink_inode_operations = { @@ -972,8 +880,8 @@ const struct inode_operations xfs_symlink_inode_operations = { .permission = xfs_vn_permission, .getattr = xfs_vn_getattr, .setattr = xfs_vn_setattr, - .setxattr = xfs_vn_setxattr, - .getxattr = xfs_vn_getxattr, + .setxattr = generic_setxattr, + .getxattr = generic_getxattr, + .removexattr = generic_removexattr, .listxattr = xfs_vn_listxattr, - .removexattr = xfs_vn_removexattr, }; diff --git a/fs/xfs/linux-2.6/xfs_iops.h b/fs/xfs/linux-2.6/xfs_iops.h index 3b4df5863e4a..d97ba934a2ac 100644 --- a/fs/xfs/linux-2.6/xfs_iops.h +++ b/fs/xfs/linux-2.6/xfs_iops.h @@ -27,6 +27,7 @@ extern const struct file_operations xfs_file_operations; extern const struct file_operations xfs_dir_file_operations; extern const struct file_operations xfs_invis_file_operations; +extern ssize_t xfs_vn_listxattr(struct dentry *, char *data, size_t size); struct xfs_inode; extern void xfs_ichgtime(struct xfs_inode *, int); diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index cce59cc6e748..967603c46998 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1766,6 +1766,7 @@ xfs_fs_fill_super( goto out_free_mp; sb_min_blocksize(sb, BBSIZE); + sb->s_xattr = xfs_xattr_handlers; sb->s_export_op = &xfs_export_operations; sb->s_qcop = &xfs_quotactl_operations; sb->s_op = &xfs_super_operations; diff --git a/fs/xfs/linux-2.6/xfs_super.h b/fs/xfs/linux-2.6/xfs_super.h index 212bdc7a7897..b7d13da01bd6 100644 --- a/fs/xfs/linux-2.6/xfs_super.h +++ b/fs/xfs/linux-2.6/xfs_super.h @@ -110,6 +110,7 @@ extern void xfs_flush_device(struct xfs_inode *); extern void xfs_blkdev_issue_flush(struct xfs_buftarg *); extern const struct export_operations xfs_export_operations; +extern struct xattr_handler *xfs_xattr_handlers[]; #define XFS_M(sb) ((struct xfs_mount *)((sb)->s_fs_info)) diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index 557dad611de0..9d91af4929b1 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -57,11 +57,6 @@ * Provide the external interfaces to manage attribute lists. */ -#define ATTR_SYSCOUNT 2 -static struct attrnames posix_acl_access; -static struct attrnames posix_acl_default; -static struct attrnames *attr_system_names[ATTR_SYSCOUNT]; - /*======================================================================== * Function prototypes for the kernel. *========================================================================*/ @@ -2378,270 +2373,3 @@ xfs_attr_trace_enter(int type, char *where, (void *)a13, (void *)a14, (void *)a15); } #endif /* XFS_ATTR_TRACE */ - - -/*======================================================================== - * System (pseudo) namespace attribute interface routines. - *========================================================================*/ - -STATIC int -posix_acl_access_set( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - return xfs_acl_vset(vp, data, size, _ACL_TYPE_ACCESS); -} - -STATIC int -posix_acl_access_remove( - bhv_vnode_t *vp, char *name, int xflags) -{ - return xfs_acl_vremove(vp, _ACL_TYPE_ACCESS); -} - -STATIC int -posix_acl_access_get( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - return xfs_acl_vget(vp, data, size, _ACL_TYPE_ACCESS); -} - -STATIC int -posix_acl_access_exists( - bhv_vnode_t *vp) -{ - return xfs_acl_vhasacl_access(vp); -} - -STATIC int -posix_acl_default_set( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - return xfs_acl_vset(vp, data, size, _ACL_TYPE_DEFAULT); -} - -STATIC int -posix_acl_default_get( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - return xfs_acl_vget(vp, data, size, _ACL_TYPE_DEFAULT); -} - -STATIC int -posix_acl_default_remove( - bhv_vnode_t *vp, char *name, int xflags) -{ - return xfs_acl_vremove(vp, _ACL_TYPE_DEFAULT); -} - -STATIC int -posix_acl_default_exists( - bhv_vnode_t *vp) -{ - return xfs_acl_vhasacl_default(vp); -} - -static struct attrnames posix_acl_access = { - .attr_name = "posix_acl_access", - .attr_namelen = sizeof("posix_acl_access") - 1, - .attr_get = posix_acl_access_get, - .attr_set = posix_acl_access_set, - .attr_remove = posix_acl_access_remove, - .attr_exists = posix_acl_access_exists, -}; - -static struct attrnames posix_acl_default = { - .attr_name = "posix_acl_default", - .attr_namelen = sizeof("posix_acl_default") - 1, - .attr_get = posix_acl_default_get, - .attr_set = posix_acl_default_set, - .attr_remove = posix_acl_default_remove, - .attr_exists = posix_acl_default_exists, -}; - -static struct attrnames *attr_system_names[] = - { &posix_acl_access, &posix_acl_default }; - - -/*======================================================================== - * Namespace-prefix-style attribute name interface routines. - *========================================================================*/ - -STATIC int -attr_generic_set( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - return -xfs_attr_set(xfs_vtoi(vp), name, data, size, xflags); -} - -STATIC int -attr_generic_get( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - int error, asize = size; - - error = xfs_attr_get(xfs_vtoi(vp), name, data, &asize, xflags); - if (!error) - return asize; - return -error; -} - -STATIC int -attr_generic_remove( - bhv_vnode_t *vp, char *name, int xflags) -{ - return -xfs_attr_remove(xfs_vtoi(vp), name, xflags); -} - -STATIC int -attr_generic_listadd( - attrnames_t *prefix, - attrnames_t *namesp, - void *data, - size_t size, - ssize_t *result) -{ - char *p = data + *result; - - *result += prefix->attr_namelen; - *result += namesp->attr_namelen + 1; - if (!size) - return 0; - if (*result > size) - return -ERANGE; - strcpy(p, prefix->attr_name); - p += prefix->attr_namelen; - strcpy(p, namesp->attr_name); - p += namesp->attr_namelen + 1; - return 0; -} - -STATIC int -attr_system_list( - bhv_vnode_t *vp, - void *data, - size_t size, - ssize_t *result) -{ - attrnames_t *namesp; - int i, error = 0; - - for (i = 0; i < ATTR_SYSCOUNT; i++) { - namesp = attr_system_names[i]; - if (!namesp->attr_exists || !namesp->attr_exists(vp)) - continue; - error = attr_generic_listadd(&attr_system, namesp, - data, size, result); - if (error) - break; - } - return error; -} - -int -attr_generic_list( - bhv_vnode_t *vp, void *data, size_t size, int xflags, ssize_t *result) -{ - attrlist_cursor_kern_t cursor = { 0 }; - int error; - - error = xfs_attr_list(xfs_vtoi(vp), data, size, xflags, &cursor); - if (error > 0) - return -error; - *result = -error; - return attr_system_list(vp, data, size, result); -} - -attrnames_t * -attr_lookup_namespace( - char *name, - struct attrnames **names, - int nnames) -{ - int i; - - for (i = 0; i < nnames; i++) - if (!strncmp(name, names[i]->attr_name, names[i]->attr_namelen)) - return names[i]; - return NULL; -} - -STATIC int -attr_system_set( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - attrnames_t *namesp; - int error; - - if (xflags & ATTR_CREATE) - return -EINVAL; - - namesp = attr_lookup_namespace(name, attr_system_names, ATTR_SYSCOUNT); - if (!namesp) - return -EOPNOTSUPP; - error = namesp->attr_set(vp, name, data, size, xflags); - if (!error) - error = vn_revalidate(vp); - return error; -} - -STATIC int -attr_system_get( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - attrnames_t *namesp; - - namesp = attr_lookup_namespace(name, attr_system_names, ATTR_SYSCOUNT); - if (!namesp) - return -EOPNOTSUPP; - return namesp->attr_get(vp, name, data, size, xflags); -} - -STATIC int -attr_system_remove( - bhv_vnode_t *vp, char *name, int xflags) -{ - attrnames_t *namesp; - - namesp = attr_lookup_namespace(name, attr_system_names, ATTR_SYSCOUNT); - if (!namesp) - return -EOPNOTSUPP; - return namesp->attr_remove(vp, name, xflags); -} - -struct attrnames attr_system = { - .attr_name = "system.", - .attr_namelen = sizeof("system.") - 1, - .attr_flag = ATTR_SYSTEM, - .attr_get = attr_system_get, - .attr_set = attr_system_set, - .attr_remove = attr_system_remove, -}; - -struct attrnames attr_trusted = { - .attr_name = "trusted.", - .attr_namelen = sizeof("trusted.") - 1, - .attr_flag = ATTR_ROOT, - .attr_get = attr_generic_get, - .attr_set = attr_generic_set, - .attr_remove = attr_generic_remove, -}; - -struct attrnames attr_secure = { - .attr_name = "security.", - .attr_namelen = sizeof("security.") - 1, - .attr_flag = ATTR_SECURE, - .attr_get = attr_generic_get, - .attr_set = attr_generic_set, - .attr_remove = attr_generic_remove, -}; - -struct attrnames attr_user = { - .attr_name = "user.", - .attr_namelen = sizeof("user.") - 1, - .attr_get = attr_generic_get, - .attr_set = attr_generic_set, - .attr_remove = attr_generic_remove, -}; - -struct attrnames *attr_namespaces[] = - { &attr_system, &attr_trusted, &attr_secure, &attr_user }; diff --git a/fs/xfs/xfs_attr.h b/fs/xfs/xfs_attr.h index 9b96d171b75c..c1f7d43e5ecf 100644 --- a/fs/xfs/xfs_attr.h +++ b/fs/xfs/xfs_attr.h @@ -38,30 +38,14 @@ struct cred; struct xfs_attr_list_context; -typedef int (*attrset_t)(bhv_vnode_t *, char *, void *, size_t, int); -typedef int (*attrget_t)(bhv_vnode_t *, char *, void *, size_t, int); -typedef int (*attrremove_t)(bhv_vnode_t *, char *, int); -typedef int (*attrexists_t)(bhv_vnode_t *); - typedef struct attrnames { char * attr_name; unsigned int attr_namelen; - unsigned int attr_flag; - attrget_t attr_get; - attrset_t attr_set; - attrremove_t attr_remove; - attrexists_t attr_exists; } attrnames_t; -#define ATTR_NAMECOUNT 4 extern struct attrnames attr_user; extern struct attrnames attr_secure; -extern struct attrnames attr_system; extern struct attrnames attr_trusted; -extern struct attrnames *attr_namespaces[ATTR_NAMECOUNT]; - -extern attrnames_t *attr_lookup_namespace(char *, attrnames_t **, int); -extern int attr_generic_list(bhv_vnode_t *, void *, size_t, int, ssize_t *); #define ATTR_DONTFOLLOW 0x0001 /* -- unused, from IRIX -- */ #define ATTR_ROOT 0x0002 /* use attrs in root (trusted) namespace */ @@ -69,7 +53,6 @@ extern int attr_generic_list(bhv_vnode_t *, void *, size_t, int, ssize_t *); #define ATTR_SECURE 0x0008 /* use attrs in security namespace */ #define ATTR_CREATE 0x0010 /* pure create: fail if attr already exists */ #define ATTR_REPLACE 0x0020 /* pure set: fail if attr does not exist */ -#define ATTR_SYSTEM 0x0100 /* use attrs in system (pseudo) namespace */ #define ATTR_KERNACCESS 0x0400 /* [kernel] iaccess, inode held io-locked */ #define ATTR_KERNOTIME 0x1000 /* [kernel] don't update inode timestamps */ -- cgit v1.2.3 From ae23a5e87dbbf4657a82e1ff8ebc52ab50361c14 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 23 Jun 2008 13:23:32 +1000 Subject: [XFS] Pack some shortform dir2 structures for the ARM old ABI architecture. This should fix the longstanding issues with xfs and old ABI arm boxes, which lead to various asserts and xfs shutdowns, and for which an (incorrect) patch has been floating around for years. I've verified this patch by comparing the on-disk structure layouts using pahole from the dwarves package, as well as running through a bit of xfsqa under qemu-arm, modified so that the check/repair phase after each test actually executes check/repair from the x86 host, on the filesystem populated by the arm emulator. Thus far it all looks good. There are 2 other structures with extra padding at the end, but they don't seem to cause trouble. I suppose they could be packed as well: xfs_dir2_data_unused_t and xfs_dir2_sf_t. Note that userspace needs a similar treatment, and any filesystems which were running with the previous rogue "fix" will now see corruption (either in the kernel, or during xfs_repair) with this fix properly in place; it may be worth teaching xfs_repair to identify and fix that specific issue. SGI-PV: 982930 SGI-Modid: xfs-linux-melb:xfs-kern:31280a Signed-off-by: Eric Sandeen Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_linux.h | 7 +++++++ fs/xfs/xfs_dir2_sf.h | 6 +++--- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_linux.h b/fs/xfs/linux-2.6/xfs_linux.h index aded57321b12..4d45d9351a6c 100644 --- a/fs/xfs/linux-2.6/xfs_linux.h +++ b/fs/xfs/linux-2.6/xfs_linux.h @@ -300,4 +300,11 @@ static inline __uint64_t howmany_64(__uint64_t x, __uint32_t y) return x; } +/* ARM old ABI has some weird alignment/padding */ +#if defined(__arm__) && !defined(__ARM_EABI__) +#define __arch_pack __attribute__((packed)) +#else +#define __arch_pack +#endif + #endif /* __XFS_LINUX__ */ diff --git a/fs/xfs/xfs_dir2_sf.h b/fs/xfs/xfs_dir2_sf.h index 005629d702d2..deecc9d238f8 100644 --- a/fs/xfs/xfs_dir2_sf.h +++ b/fs/xfs/xfs_dir2_sf.h @@ -62,7 +62,7 @@ typedef union { * Normalized offset (in a data block) of the entry, really xfs_dir2_data_off_t. * Only need 16 bits, this is the byte offset into the single block form. */ -typedef struct { __uint8_t i[2]; } xfs_dir2_sf_off_t; +typedef struct { __uint8_t i[2]; } __arch_pack xfs_dir2_sf_off_t; /* * The parent directory has a dedicated field, and the self-pointer must @@ -76,14 +76,14 @@ typedef struct xfs_dir2_sf_hdr { __uint8_t count; /* count of entries */ __uint8_t i8count; /* count of 8-byte inode #s */ xfs_dir2_inou_t parent; /* parent dir inode number */ -} xfs_dir2_sf_hdr_t; +} __arch_pack xfs_dir2_sf_hdr_t; typedef struct xfs_dir2_sf_entry { __uint8_t namelen; /* actual name length */ xfs_dir2_sf_off_t offset; /* saved offset */ __uint8_t name[1]; /* name, variable size */ xfs_dir2_inou_t inumber; /* inode number, var. offset */ -} xfs_dir2_sf_entry_t; +} __arch_pack xfs_dir2_sf_entry_t; typedef struct xfs_dir2_sf { xfs_dir2_sf_hdr_t hdr; /* shortform header */ -- cgit v1.2.3 From caf8aabdbc6849de772850d26d3dbe35e8f63bff Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 23 Jun 2008 13:23:41 +1000 Subject: [XFS] Factor out code for whether inode has attributes or not. SGI-PV: 983394 SGI-Modid: xfs-linux-melb:xfs-kern:31323a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_attr.c | 51 +++++++++++++++++++++++---------------------------- 1 file changed, 23 insertions(+), 28 deletions(-) diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index 9d91af4929b1..49fac8d6db12 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -111,6 +111,17 @@ xfs_attr_name_to_xname( return 0; } +STATIC int +xfs_inode_hasattr( + struct xfs_inode *ip) +{ + if (!XFS_IFORK_Q(ip) || + (ip->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && + ip->i_d.di_anextents == 0)) + return 0; + return 1; +} + /*======================================================================== * Overall external interface routines. *========================================================================*/ @@ -122,10 +133,8 @@ xfs_attr_fetch(xfs_inode_t *ip, struct xfs_name *name, xfs_da_args_t args; int error; - if ((XFS_IFORK_Q(ip) == 0) || - (ip->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && - ip->i_d.di_anextents == 0)) - return(ENOATTR); + if (!xfs_inode_hasattr(ip)) + return ENOATTR; /* * Fill in the arg structure for this request. @@ -143,11 +152,7 @@ xfs_attr_fetch(xfs_inode_t *ip, struct xfs_name *name, /* * Decide on what work routines to call based on the inode size. */ - if (XFS_IFORK_Q(ip) == 0 || - (ip->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && - ip->i_d.di_anextents == 0)) { - error = XFS_ERROR(ENOATTR); - } else if (ip->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) { + if (ip->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) { error = xfs_attr_shortform_getvalue(&args); } else if (xfs_bmap_one_block(ip, XFS_ATTR_FORK)) { error = xfs_attr_leaf_get(&args); @@ -523,9 +528,7 @@ xfs_attr_remove_int(xfs_inode_t *dp, struct xfs_name *name, int flags) /* * Decide on what work routines to call based on the inode size. */ - if (XFS_IFORK_Q(dp) == 0 || - (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && - dp->i_d.di_anextents == 0)) { + if (!xfs_inode_hasattr(dp)) { error = XFS_ERROR(ENOATTR); goto out; } @@ -595,11 +598,9 @@ xfs_attr_remove( return error; xfs_ilock(dp, XFS_ILOCK_SHARED); - if (XFS_IFORK_Q(dp) == 0 || - (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && - dp->i_d.di_anextents == 0)) { + if (!xfs_inode_hasattr(dp)) { xfs_iunlock(dp, XFS_ILOCK_SHARED); - return(XFS_ERROR(ENOATTR)); + return XFS_ERROR(ENOATTR); } xfs_iunlock(dp, XFS_ILOCK_SHARED); @@ -615,9 +616,7 @@ xfs_attr_list_int(xfs_attr_list_context_t *context) /* * Decide on what work routines to call based on the inode size. */ - if (XFS_IFORK_Q(dp) == 0 || - (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && - dp->i_d.di_anextents == 0)) { + if (!xfs_inode_hasattr(dp)) { error = 0; } else if (dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) { error = xfs_attr_shortform_list(context); @@ -810,12 +809,10 @@ xfs_attr_inactive(xfs_inode_t *dp) ASSERT(! XFS_NOT_DQATTACHED(mp, dp)); xfs_ilock(dp, XFS_ILOCK_SHARED); - if ((XFS_IFORK_Q(dp) == 0) || - (dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) || - (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && - dp->i_d.di_anextents == 0)) { + if (!xfs_inode_hasattr(dp) || + dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) { xfs_iunlock(dp, XFS_ILOCK_SHARED); - return(0); + return 0; } xfs_iunlock(dp, XFS_ILOCK_SHARED); @@ -848,10 +845,8 @@ xfs_attr_inactive(xfs_inode_t *dp) /* * Decide on what work routines to call based on the inode size. */ - if ((XFS_IFORK_Q(dp) == 0) || - (dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) || - (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && - dp->i_d.di_anextents == 0)) { + if (!xfs_inode_hasattr(dp) || + dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) { error = 0; goto out; } -- cgit v1.2.3 From ad9b463aa206b8c8f0bab378cf7c090c1a9a8e34 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 23 Jun 2008 13:23:48 +1000 Subject: [XFS] Switches xfs_vn_listxattr to set it's put_listent callback directly and not go through xfs_attr_list. SGI-PV: 983395 SGI-Modid: xfs-linux-melb:xfs-kern:31324a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_acl.c | 3 +- fs/xfs/xfs_attr.c | 139 ++++++++++++++++--------------------------------- fs/xfs/xfs_attr.h | 55 ++++++++++--------- fs/xfs/xfs_attr_leaf.c | 61 +++------------------- fs/xfs/xfs_attr_leaf.h | 29 +---------- 5 files changed, 84 insertions(+), 203 deletions(-) diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c index ebee3a4f703a..93057af2fe3d 100644 --- a/fs/xfs/xfs_acl.c +++ b/fs/xfs/xfs_acl.c @@ -341,8 +341,7 @@ xfs_acl_iaccess( /* If the file has no ACL return -1. */ rval = sizeof(xfs_acl_t); - if (xfs_attr_fetch(ip, &acl_name, (char *)acl, &rval, - ATTR_ROOT | ATTR_KERNACCESS)) { + if (xfs_attr_fetch(ip, &acl_name, (char *)acl, &rval, ATTR_ROOT)) { _ACL_FREE(acl); return -1; } diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index 49fac8d6db12..78de80e3caa2 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -16,8 +16,6 @@ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include - #include "xfs.h" #include "xfs_fs.h" #include "xfs_types.h" @@ -607,12 +605,20 @@ xfs_attr_remove( return xfs_attr_remove_int(dp, &xname, flags); } -STATIC int +int xfs_attr_list_int(xfs_attr_list_context_t *context) { int error; xfs_inode_t *dp = context->dp; + XFS_STATS_INC(xs_attr_list); + + if (XFS_FORCED_SHUTDOWN(dp->i_mount)) + return EIO; + + xfs_ilock(dp, XFS_ILOCK_SHARED); + xfs_attr_trace_l_c("syscall start", context); + /* * Decide on what work routines to call based on the inode size. */ @@ -625,6 +631,10 @@ xfs_attr_list_int(xfs_attr_list_context_t *context) } else { error = xfs_attr_node_list(context); } + + xfs_iunlock(dp, XFS_ILOCK_SHARED); + xfs_attr_trace_l_c("syscall end", context); + return error; } @@ -641,74 +651,50 @@ xfs_attr_list_int(xfs_attr_list_context_t *context) */ /*ARGSUSED*/ STATIC int -xfs_attr_put_listent(xfs_attr_list_context_t *context, attrnames_t *namesp, +xfs_attr_put_listent(xfs_attr_list_context_t *context, int flags, char *name, int namelen, int valuelen, char *value) { + struct attrlist *alist = (struct attrlist *)context->alist; attrlist_ent_t *aep; int arraytop; ASSERT(!(context->flags & ATTR_KERNOVAL)); ASSERT(context->count >= 0); ASSERT(context->count < (ATTR_MAX_VALUELEN/8)); - ASSERT(context->firstu >= sizeof(*context->alist)); + ASSERT(context->firstu >= sizeof(*alist)); ASSERT(context->firstu <= context->bufsize); - arraytop = sizeof(*context->alist) + - context->count * sizeof(context->alist->al_offset[0]); + /* + * Only list entries in the right namespace. + */ + if (((context->flags & ATTR_SECURE) == 0) != + ((flags & XFS_ATTR_SECURE) == 0)) + return 0; + if (((context->flags & ATTR_ROOT) == 0) != + ((flags & XFS_ATTR_ROOT) == 0)) + return 0; + + arraytop = sizeof(*alist) + + context->count * sizeof(alist->al_offset[0]); context->firstu -= ATTR_ENTSIZE(namelen); if (context->firstu < arraytop) { xfs_attr_trace_l_c("buffer full", context); - context->alist->al_more = 1; + alist->al_more = 1; context->seen_enough = 1; return 1; } - aep = (attrlist_ent_t *)&(((char *)context->alist)[ context->firstu ]); + aep = (attrlist_ent_t *)&context->alist[context->firstu]; aep->a_valuelen = valuelen; memcpy(aep->a_name, name, namelen); - aep->a_name[ namelen ] = 0; - context->alist->al_offset[ context->count++ ] = context->firstu; - context->alist->al_count = context->count; + aep->a_name[namelen] = 0; + alist->al_offset[context->count++] = context->firstu; + alist->al_count = context->count; xfs_attr_trace_l_c("add", context); return 0; } -STATIC int -xfs_attr_kern_list(xfs_attr_list_context_t *context, attrnames_t *namesp, - char *name, int namelen, - int valuelen, char *value) -{ - char *offset; - int arraytop; - - ASSERT(context->count >= 0); - - arraytop = context->count + namesp->attr_namelen + namelen + 1; - if (arraytop > context->firstu) { - context->count = -1; /* insufficient space */ - return 1; - } - offset = (char *)context->alist + context->count; - strncpy(offset, namesp->attr_name, namesp->attr_namelen); - offset += namesp->attr_namelen; - strncpy(offset, name, namelen); /* real name */ - offset += namelen; - *offset = '\0'; - context->count += namesp->attr_namelen + namelen + 1; - return 0; -} - -/*ARGSUSED*/ -STATIC int -xfs_attr_kern_list_sizes(xfs_attr_list_context_t *context, attrnames_t *namesp, - char *name, int namelen, - int valuelen, char *value) -{ - context->count += namesp->attr_namelen + namelen + 1; - return 0; -} - /* * Generate a list of extended attribute names and optionally * also value lengths. Positive return value follows the XFS @@ -725,10 +711,9 @@ xfs_attr_list( attrlist_cursor_kern_t *cursor) { xfs_attr_list_context_t context; + struct attrlist *alist; int error; - XFS_STATS_INC(xs_attr_list); - /* * Validate the cursor. */ @@ -749,52 +734,23 @@ xfs_attr_list( /* * Initialize the output buffer. */ + memset(&context, 0, sizeof(context)); context.dp = dp; context.cursor = cursor; - context.count = 0; - context.dupcnt = 0; context.resynch = 1; context.flags = flags; - context.seen_enough = 0; - context.alist = (attrlist_t *)buffer; - context.put_value = 0; - - if (flags & ATTR_KERNAMELS) { - context.bufsize = bufsize; - context.firstu = context.bufsize; - if (flags & ATTR_KERNOVAL) - context.put_listent = xfs_attr_kern_list_sizes; - else - context.put_listent = xfs_attr_kern_list; - } else { - context.bufsize = (bufsize & ~(sizeof(int)-1)); /* align */ - context.firstu = context.bufsize; - context.alist->al_count = 0; - context.alist->al_more = 0; - context.alist->al_offset[0] = context.bufsize; - context.put_listent = xfs_attr_put_listent; - } - - if (XFS_FORCED_SHUTDOWN(dp->i_mount)) - return EIO; + context.alist = buffer; + context.bufsize = (bufsize & ~(sizeof(int)-1)); /* align */ + context.firstu = context.bufsize; + context.put_listent = xfs_attr_put_listent; - xfs_ilock(dp, XFS_ILOCK_SHARED); - xfs_attr_trace_l_c("syscall start", &context); + alist = (struct attrlist *)context.alist; + alist->al_count = 0; + alist->al_more = 0; + alist->al_offset[0] = context.bufsize; error = xfs_attr_list_int(&context); - - xfs_iunlock(dp, XFS_ILOCK_SHARED); - xfs_attr_trace_l_c("syscall end", &context); - - if (context.flags & (ATTR_KERNOVAL|ATTR_KERNAMELS)) { - /* must return negated buffer size or the error */ - if (context.count < 0) - error = XFS_ERROR(ERANGE); - else - error = -context.count; - } else - ASSERT(error >= 0); - + ASSERT(error >= 0); return error; } @@ -2357,12 +2313,7 @@ xfs_attr_trace_enter(int type, char *where, (void *)((__psunsigned_t)context->bufsize), (void *)((__psunsigned_t)context->count), (void *)((__psunsigned_t)context->firstu), - (void *)((__psunsigned_t) - (((context->count > 0) && - !(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL))) - ? (ATTR_ENTRY(context->alist, - context->count-1)->a_valuelen) - : 0)), + NULL, (void *)((__psunsigned_t)context->dupcnt), (void *)((__psunsigned_t)context->flags), (void *)a13, (void *)a14, (void *)a15); diff --git a/fs/xfs/xfs_attr.h b/fs/xfs/xfs_attr.h index c1f7d43e5ecf..41469434f413 100644 --- a/fs/xfs/xfs_attr.h +++ b/fs/xfs/xfs_attr.h @@ -18,9 +18,11 @@ #ifndef __XFS_ATTR_H__ #define __XFS_ATTR_H__ +struct xfs_inode; +struct xfs_da_args; +struct xfs_attr_list_context; + /* - * xfs_attr.h - * * Large attribute lists are structured around Btrees where all the data * elements are in the leaf nodes. Attribute names are hashed into an int, * then that int is used as the index into the Btree. Since the hashval @@ -35,17 +37,6 @@ * External interfaces *========================================================================*/ -struct cred; -struct xfs_attr_list_context; - -typedef struct attrnames { - char * attr_name; - unsigned int attr_namelen; -} attrnames_t; - -extern struct attrnames attr_user; -extern struct attrnames attr_secure; -extern struct attrnames attr_trusted; #define ATTR_DONTFOLLOW 0x0001 /* -- unused, from IRIX -- */ #define ATTR_ROOT 0x0002 /* use attrs in root (trusted) namespace */ @@ -54,14 +45,8 @@ extern struct attrnames attr_trusted; #define ATTR_CREATE 0x0010 /* pure create: fail if attr already exists */ #define ATTR_REPLACE 0x0020 /* pure set: fail if attr does not exist */ -#define ATTR_KERNACCESS 0x0400 /* [kernel] iaccess, inode held io-locked */ #define ATTR_KERNOTIME 0x1000 /* [kernel] don't update inode timestamps */ #define ATTR_KERNOVAL 0x2000 /* [kernel] get attr size only, not value */ -#define ATTR_KERNAMELS 0x4000 /* [kernel] list attr names (simple list) */ - -#define ATTR_KERNORMALS 0x0800 /* [kernel] normal attr list: user+secure */ -#define ATTR_KERNROOTLS 0x8000 /* [kernel] include root in the attr list */ -#define ATTR_KERNFULLS (ATTR_KERNORMALS|ATTR_KERNROOTLS) /* * The maximum size (into the kernel or returned from the kernel) of an @@ -129,20 +114,40 @@ typedef struct attrlist_cursor_kern { /*======================================================================== - * Function prototypes for the kernel. + * Structure used to pass context around among the routines. *========================================================================*/ -struct xfs_inode; -struct attrlist_cursor_kern; -struct xfs_da_args; + +typedef int (*put_listent_func_t)(struct xfs_attr_list_context *, int, + char *, int, int, char *); + +typedef struct xfs_attr_list_context { + struct xfs_inode *dp; /* inode */ + struct attrlist_cursor_kern *cursor; /* position in list */ + char *alist; /* output buffer */ + int seen_enough; /* T/F: seen enough of list? */ + int count; /* num used entries */ + int dupcnt; /* count dup hashvals seen */ + int bufsize; /* total buffer size */ + int firstu; /* first used byte in buffer */ + int flags; /* from VOP call */ + int resynch; /* T/F: resynch with cursor */ + int put_value; /* T/F: need value for listent */ + put_listent_func_t put_listent; /* list output fmt function */ + int index; /* index into output buffer */ +} xfs_attr_list_context_t; + + +/*======================================================================== + * Function prototypes for the kernel. + *========================================================================*/ /* * Overall external interface routines. */ int xfs_attr_inactive(struct xfs_inode *dp); - -int xfs_attr_shortform_getvalue(struct xfs_da_args *); int xfs_attr_fetch(struct xfs_inode *, struct xfs_name *, char *, int *, int); int xfs_attr_rmtval_get(struct xfs_da_args *args); +int xfs_attr_list_int(struct xfs_attr_list_context *); #endif /* __XFS_ATTR_H__ */ diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index cb345e6e4850..23ef5d7c87e1 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -94,13 +94,6 @@ STATIC int xfs_attr_leaf_entsize(xfs_attr_leafblock_t *leaf, int index); * Namespace helper routines *========================================================================*/ -STATIC_INLINE attrnames_t * -xfs_attr_flags_namesp(int flags) -{ - return ((flags & XFS_ATTR_SECURE) ? &attr_secure: - ((flags & XFS_ATTR_ROOT) ? &attr_trusted : &attr_user)); -} - /* * If namespace bits don't match return 0. * If all match then return 1. @@ -111,25 +104,6 @@ xfs_attr_namesp_match(int arg_flags, int ondisk_flags) return XFS_ATTR_NSP_ONDISK(ondisk_flags) == XFS_ATTR_NSP_ARGS_TO_ONDISK(arg_flags); } -/* - * If namespace bits don't match and we don't have an override for it - * then return 0. - * If all match or are overridable then return 1. - */ -STATIC_INLINE int -xfs_attr_namesp_match_overrides(int arg_flags, int ondisk_flags) -{ - if (((arg_flags & ATTR_SECURE) == 0) != - ((ondisk_flags & XFS_ATTR_SECURE) == 0) && - !(arg_flags & ATTR_KERNORMALS)) - return 0; - if (((arg_flags & ATTR_ROOT) == 0) != - ((ondisk_flags & XFS_ATTR_ROOT) == 0) && - !(arg_flags & ATTR_KERNROOTLS)) - return 0; - return 1; -} - /*======================================================================== * External routines when attribute fork size < XFS_LITINO(mp). @@ -626,15 +600,8 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context) (XFS_ISRESET_CURSOR(cursor) && (dp->i_afp->if_bytes + sf->hdr.count * 16) < context->bufsize)) { for (i = 0, sfe = &sf->list[0]; i < sf->hdr.count; i++) { - attrnames_t *namesp; - - if (!xfs_attr_namesp_match_overrides(context->flags, sfe->flags)) { - sfe = XFS_ATTR_SF_NEXTENTRY(sfe); - continue; - } - namesp = xfs_attr_flags_namesp(sfe->flags); error = context->put_listent(context, - namesp, + sfe->flags, (char *)sfe->nameval, (int)sfe->namelen, (int)sfe->valuelen, @@ -681,10 +648,7 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context) kmem_free(sbuf); return XFS_ERROR(EFSCORRUPTED); } - if (!xfs_attr_namesp_match_overrides(context->flags, sfe->flags)) { - sfe = XFS_ATTR_SF_NEXTENTRY(sfe); - continue; - } + sbp->entno = i; sbp->hash = xfs_da_hashname((char *)sfe->nameval, sfe->namelen); sbp->name = (char *)sfe->nameval; @@ -728,16 +692,12 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context) * Loop putting entries into the user buffer. */ for ( ; i < nsbuf; i++, sbp++) { - attrnames_t *namesp; - - namesp = xfs_attr_flags_namesp(sbp->flags); - if (cursor->hashval != sbp->hash) { cursor->hashval = sbp->hash; cursor->offset = 0; } error = context->put_listent(context, - namesp, + sbp->flags, sbp->name, sbp->namelen, sbp->valuelen, @@ -2402,8 +2362,6 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context) */ retval = 0; for ( ; (i < be16_to_cpu(leaf->hdr.count)); entry++, i++) { - attrnames_t *namesp; - if (be32_to_cpu(entry->hashval) != cursor->hashval) { cursor->hashval = be32_to_cpu(entry->hashval); cursor->offset = 0; @@ -2411,17 +2369,13 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context) if (entry->flags & XFS_ATTR_INCOMPLETE) continue; /* skip incomplete entries */ - if (!xfs_attr_namesp_match_overrides(context->flags, entry->flags)) - continue; - - namesp = xfs_attr_flags_namesp(entry->flags); if (entry->flags & XFS_ATTR_LOCAL) { xfs_attr_leaf_name_local_t *name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, i); retval = context->put_listent(context, - namesp, + entry->flags, (char *)name_loc->nameval, (int)name_loc->namelen, be16_to_cpu(name_loc->valuelen), @@ -2448,16 +2402,15 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context) if (retval) return retval; retval = context->put_listent(context, - namesp, + entry->flags, (char *)name_rmt->name, (int)name_rmt->namelen, valuelen, (char*)args.value); kmem_free(args.value); - } - else { + } else { retval = context->put_listent(context, - namesp, + entry->flags, (char *)name_rmt->name, (int)name_rmt->namelen, valuelen, diff --git a/fs/xfs/xfs_attr_leaf.h b/fs/xfs/xfs_attr_leaf.h index 040f732ce1e2..5ecf437b7825 100644 --- a/fs/xfs/xfs_attr_leaf.h +++ b/fs/xfs/xfs_attr_leaf.h @@ -30,7 +30,7 @@ struct attrlist; struct attrlist_cursor_kern; -struct attrnames; +struct xfs_attr_list_context; struct xfs_dabuf; struct xfs_da_args; struct xfs_da_state; @@ -204,33 +204,6 @@ static inline int xfs_attr_leaf_entsize_local_max(int bsize) return (((bsize) >> 1) + ((bsize) >> 2)); } - -/*======================================================================== - * Structure used to pass context around among the routines. - *========================================================================*/ - - -struct xfs_attr_list_context; - -typedef int (*put_listent_func_t)(struct xfs_attr_list_context *, struct attrnames *, - char *, int, int, char *); - -typedef struct xfs_attr_list_context { - struct xfs_inode *dp; /* inode */ - struct attrlist_cursor_kern *cursor; /* position in list */ - struct attrlist *alist; /* output buffer */ - int seen_enough; /* T/F: seen enough of list? */ - int count; /* num used entries */ - int dupcnt; /* count dup hashvals seen */ - int bufsize; /* total buffer size */ - int firstu; /* first used byte in buffer */ - int flags; /* from VOP call */ - int resynch; /* T/F: resynch with cursor */ - int put_value; /* T/F: need value for listent */ - put_listent_func_t put_listent; /* list output fmt function */ - int index; /* index into output buffer */ -} xfs_attr_list_context_t; - /* * Used to keep a list of "remote value" extents when unlinking an inode. */ -- cgit v1.2.3 From 7f871d5d1b9b126c1a0cece737a37c6980c988e3 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Mon, 23 Jun 2008 13:23:57 +1000 Subject: [XFS] make inode reclaim wait for log I/O to complete During a forced shutdown a xfs inode can be destroyed before log I/O involving that inode is complete. We need to wait for the inode to be unpinned before tearing it down. Version 2 cleans up the code a bit by relying on xfs_iflush() to do the unpinning and forced shutdown check. SGI-PV: 981240 SGI-Modid: xfs-linux-melb:xfs-kern:31326a Signed-off-by: Lachlan McIlroy Signed-off-by: David Chinner --- fs/xfs/xfs_inode.c | 2 -- fs/xfs/xfs_vnodeops.c | 30 ++++++++---------------------- 2 files changed, 8 insertions(+), 24 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 199a36ac8e2d..fcb1dcc6f036 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -3082,8 +3082,6 @@ xfs_iflush( * flush lock and do nothing. */ if (xfs_inode_clean(ip)) { - ASSERT((iip != NULL) ? - !(iip->ili_item.li_flags & XFS_LI_IN_AIL) : 1); xfs_ifunlock(ip); return 0; } diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index b6a065eb25a5..d76565bfcb7b 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -3260,7 +3260,6 @@ xfs_finish_reclaim( { xfs_perag_t *pag = xfs_get_perag(ip->i_mount, ip->i_ino); bhv_vnode_t *vp = XFS_ITOV_NULL(ip); - int error; if (vp && VN_BAD(vp)) goto reclaim; @@ -3303,29 +3302,16 @@ xfs_finish_reclaim( xfs_iflock(ip); } - if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) { - if (ip->i_update_core || - ((ip->i_itemp != NULL) && - (ip->i_itemp->ili_format.ilf_fields != 0))) { - error = xfs_iflush(ip, sync_mode); - /* - * If we hit an error, typically because of filesystem - * shutdown, we don't need to let vn_reclaim to know - * because we're gonna reclaim the inode anyway. - */ - if (error) { - xfs_iunlock(ip, XFS_ILOCK_EXCL); - goto reclaim; - } - xfs_iflock(ip); /* synchronize with xfs_iflush_done */ - } - - ASSERT(ip->i_update_core == 0); - ASSERT(ip->i_itemp == NULL || - ip->i_itemp->ili_format.ilf_fields == 0); + /* + * In the case of a forced shutdown we rely on xfs_iflush() to + * wait for the inode to be unpinned before returning an error. + */ + if (xfs_iflush(ip, sync_mode) == 0) { + /* synchronize with xfs_iflush_done */ + xfs_iflock(ip); + xfs_ifunlock(ip); } - xfs_ifunlock(ip); xfs_iunlock(ip, XFS_ILOCK_EXCL); reclaim: -- cgit v1.2.3 From 6278debdf95b100a516b803f90d6f11b41c34171 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Mon, 23 Jun 2008 13:25:02 +1000 Subject: [XFS] fix extent corruption in xfs_iext_irec_compact_full() This function is used to compact the indirect extent list by moving extents from one page to the previous to fill them up. After we move some extents to an earlier page we need to shuffle the remaining extents to the start of the page. The actual bug here is the second argument to memmove() needs to index past the extents, that were copied to the previous page, and move the remaining extents. For pages that are already full (ie ext_avail == 0) the compaction code has no net effect so don't do it. SGI-PV: 983337 SGI-Modid: xfs-linux-melb:xfs-kern:31332a Signed-off-by: Lachlan McIlroy Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_inode.c | 70 ++++++++++++++++++++++++++++++++++++------------------ 1 file changed, 47 insertions(+), 23 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index fcb1dcc6f036..bedc66163176 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -4532,39 +4532,63 @@ xfs_iext_irec_compact_full( int nlists; /* number of irec's (ex lists) */ ASSERT(ifp->if_flags & XFS_IFEXTIREC); + nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; erp = ifp->if_u1.if_ext_irec; ep = &erp->er_extbuf[erp->er_extcount]; erp_next = erp + 1; ep_next = erp_next->er_extbuf; + while (erp_idx < nlists - 1) { + /* + * Check how many extent records are available in this irec. + * If there is none skip the whole exercise. + */ ext_avail = XFS_LINEAR_EXTS - erp->er_extcount; - ext_diff = MIN(ext_avail, erp_next->er_extcount); - memcpy(ep, ep_next, ext_diff * sizeof(xfs_bmbt_rec_t)); - erp->er_extcount += ext_diff; - erp_next->er_extcount -= ext_diff; - /* Remove next page */ - if (erp_next->er_extcount == 0) { + if (ext_avail) { + /* - * Free page before removing extent record - * so er_extoffs don't get modified in - * xfs_iext_irec_remove. + * Copy over as many as possible extent records into + * the previous page. */ - kmem_free(erp_next->er_extbuf); - erp_next->er_extbuf = NULL; - xfs_iext_irec_remove(ifp, erp_idx + 1); - erp = &ifp->if_u1.if_ext_irec[erp_idx]; - nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; - /* Update next page */ - } else { - /* Move rest of page up to become next new page */ - memmove(erp_next->er_extbuf, ep_next, - erp_next->er_extcount * sizeof(xfs_bmbt_rec_t)); - ep_next = erp_next->er_extbuf; - memset(&ep_next[erp_next->er_extcount], 0, - (XFS_LINEAR_EXTS - erp_next->er_extcount) * - sizeof(xfs_bmbt_rec_t)); + ext_diff = MIN(ext_avail, erp_next->er_extcount); + memcpy(ep, ep_next, ext_diff * sizeof(xfs_bmbt_rec_t)); + erp->er_extcount += ext_diff; + erp_next->er_extcount -= ext_diff; + + /* + * If the next irec is empty now we can simply + * remove it. + */ + if (erp_next->er_extcount == 0) { + /* + * Free page before removing extent record + * so er_extoffs don't get modified in + * xfs_iext_irec_remove. + */ + kmem_free(erp_next->er_extbuf); + erp_next->er_extbuf = NULL; + xfs_iext_irec_remove(ifp, erp_idx + 1); + erp = &ifp->if_u1.if_ext_irec[erp_idx]; + nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; + + /* + * If the next irec is not empty move up the content + * that has not been copied to the previous page to + * the beggining of this one. + */ + } else { + memmove(erp_next->er_extbuf, &ep_next[ext_diff], + erp_next->er_extcount * + sizeof(xfs_bmbt_rec_t)); + ep_next = erp_next->er_extbuf; + memset(&ep_next[erp_next->er_extcount], 0, + (XFS_LINEAR_EXTS - + erp_next->er_extcount) * + sizeof(xfs_bmbt_rec_t)); + } } + if (erp->er_extcount == XFS_LINEAR_EXTS) { erp_idx++; if (erp_idx < nlists) -- cgit v1.2.3 From 61f10fad1947116055c694321d9d8f21152c0582 Mon Sep 17 00:00:00 2001 From: Tim Shimmin Date: Mon, 23 Jun 2008 13:25:09 +1000 Subject: [XFS] Fix up warning for xfs_vn_listxatt's call of list_one_attr() with context count of ssize_t versus int. Change context count to be ssize_t. SGI-PV: 983395 SGI-Modid: xfs-linux-melb:xfs-kern:31333a Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_attr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_attr.h b/fs/xfs/xfs_attr.h index 41469434f413..3115dcc67236 100644 --- a/fs/xfs/xfs_attr.h +++ b/fs/xfs/xfs_attr.h @@ -126,7 +126,7 @@ typedef struct xfs_attr_list_context { struct attrlist_cursor_kern *cursor; /* position in list */ char *alist; /* output buffer */ int seen_enough; /* T/F: seen enough of list? */ - int count; /* num used entries */ + ssize_t count; /* num used entries */ int dupcnt; /* count dup hashvals seen */ int bufsize; /* total buffer size */ int firstu; /* first used byte in buffer */ -- cgit v1.2.3 From 8f112e3bc3508afc8d1612868d178359446c08fd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 23 Jun 2008 13:25:17 +1000 Subject: [XFS] Merge xfs_rmdir into xfs_remove xfs_remove and xfs_rmdir are almost the same with a little more work performed in xfs_rmdir due to the . and .. entries. This patch merges xfs_rmdir into xfs_remove and performs these actions conditionally. Also clean up the error handling which was a nightmare in both versions before. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31335a Signed-off-by: Christoph Hellwig Signed-off-by: Barry Naujok Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_iops.c | 54 +++----- fs/xfs/xfs_vnodeops.c | 324 ++++++++++++-------------------------------- fs/xfs/xfs_vnodeops.h | 2 - 3 files changed, 102 insertions(+), 278 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 3ae80155de3a..1f89c19cd4c4 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -245,8 +245,7 @@ STATIC void xfs_cleanup_inode( struct inode *dir, struct inode *inode, - struct dentry *dentry, - int mode) + struct dentry *dentry) { struct xfs_name teardown; @@ -257,10 +256,7 @@ xfs_cleanup_inode( */ xfs_dentry_to_name(&teardown, dentry); - if (S_ISDIR(mode)) - xfs_rmdir(XFS_I(dir), &teardown, XFS_I(inode)); - else - xfs_remove(XFS_I(dir), &teardown, XFS_I(inode)); + xfs_remove(XFS_I(dir), &teardown, XFS_I(inode)); iput(inode); } @@ -342,7 +338,7 @@ xfs_vn_mknod( return -error; out_cleanup_inode: - xfs_cleanup_inode(dir, inode, dentry, mode); + xfs_cleanup_inode(dir, inode, dentry); out_free_acl: if (default_acl) _ACL_FREE(default_acl); @@ -518,37 +514,11 @@ xfs_vn_symlink( return 0; out_cleanup_inode: - xfs_cleanup_inode(dir, inode, dentry, 0); + xfs_cleanup_inode(dir, inode, dentry); out: return -error; } -STATIC int -xfs_vn_rmdir( - struct inode *dir, - struct dentry *dentry) -{ - struct inode *inode = dentry->d_inode; - struct xfs_name name; - int error; - - xfs_dentry_to_name(&name, dentry); - - error = xfs_rmdir(XFS_I(dir), &name, XFS_I(inode)); - if (likely(!error)) { - xfs_validate_fields(inode); - xfs_validate_fields(dir); - /* - * With rmdir, the VFS makes the dentry "negative": no inode, - * but still hashed. This is incompatible with case-insensitive - * mode, so invalidate (unhash) the dentry in CI-mode. - */ - if (xfs_sb_version_hasasciici(&XFS_M(dir->i_sb)->m_sb)) - d_invalidate(dentry); - } - return -error; -} - STATIC int xfs_vn_rename( struct inode *odir, @@ -842,7 +812,13 @@ const struct inode_operations xfs_dir_inode_operations = { .unlink = xfs_vn_unlink, .symlink = xfs_vn_symlink, .mkdir = xfs_vn_mkdir, - .rmdir = xfs_vn_rmdir, + /* + * Yes, XFS uses the same method for rmdir and unlink. + * + * There are some subtile differences deeper in the code, + * but we use S_ISDIR to check for those. + */ + .rmdir = xfs_vn_unlink, .mknod = xfs_vn_mknod, .rename = xfs_vn_rename, .permission = xfs_vn_permission, @@ -861,7 +837,13 @@ const struct inode_operations xfs_dir_ci_inode_operations = { .unlink = xfs_vn_unlink, .symlink = xfs_vn_symlink, .mkdir = xfs_vn_mkdir, - .rmdir = xfs_vn_rmdir, + /* + * Yes, XFS uses the same method for rmdir and unlink. + * + * There are some subtile differences deeper in the code, + * but we use S_ISDIR to check for those. + */ + .rmdir = xfs_vn_unlink, .mknod = xfs_vn_mknod, .rename = xfs_vn_rename, .permission = xfs_vn_permission, diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index d76565bfcb7b..8297a8c5af90 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -2116,13 +2116,6 @@ again: #endif } -#ifdef DEBUG -#define REMOVE_DEBUG_TRACE(x) {remove_which_error_return = (x);} -int remove_which_error_return = 0; -#else /* ! DEBUG */ -#define REMOVE_DEBUG_TRACE(x) -#endif /* ! DEBUG */ - int xfs_remove( xfs_inode_t *dp, @@ -2131,6 +2124,7 @@ xfs_remove( { xfs_mount_t *mp = dp->i_mount; xfs_trans_t *tp = NULL; + int is_dir = S_ISDIR(ip->i_d.di_mode); int error = 0; xfs_bmap_free_t free_list; xfs_fsblock_t first_block; @@ -2138,8 +2132,10 @@ xfs_remove( int committed; int link_zero; uint resblks; + uint log_count; xfs_itrace_entry(dp); + xfs_itrace_entry(ip); if (XFS_FORCED_SHUTDOWN(mp)) return XFS_ERROR(EIO); @@ -2152,19 +2148,23 @@ xfs_remove( return error; } - xfs_itrace_entry(ip); - xfs_itrace_ref(ip); - error = XFS_QM_DQATTACH(mp, dp, 0); - if (!error) - error = XFS_QM_DQATTACH(mp, ip, 0); - if (error) { - REMOVE_DEBUG_TRACE(__LINE__); + if (error) + goto std_return; + + error = XFS_QM_DQATTACH(mp, ip, 0); + if (error) goto std_return; - } - tp = xfs_trans_alloc(mp, XFS_TRANS_REMOVE); + if (is_dir) { + tp = xfs_trans_alloc(mp, XFS_TRANS_RMDIR); + log_count = XFS_DEFAULT_LOG_COUNT; + } else { + tp = xfs_trans_alloc(mp, XFS_TRANS_REMOVE); + log_count = XFS_REMOVE_LOG_COUNT; + } cancel_flags = XFS_TRANS_RELEASE_LOG_RES; + /* * We try to get the real space reservation first, * allowing for directory btree deletion(s) implying @@ -2176,25 +2176,21 @@ xfs_remove( */ resblks = XFS_REMOVE_SPACE_RES(mp); error = xfs_trans_reserve(tp, resblks, XFS_REMOVE_LOG_RES(mp), 0, - XFS_TRANS_PERM_LOG_RES, XFS_REMOVE_LOG_COUNT); + XFS_TRANS_PERM_LOG_RES, log_count); if (error == ENOSPC) { resblks = 0; error = xfs_trans_reserve(tp, 0, XFS_REMOVE_LOG_RES(mp), 0, - XFS_TRANS_PERM_LOG_RES, XFS_REMOVE_LOG_COUNT); + XFS_TRANS_PERM_LOG_RES, log_count); } if (error) { ASSERT(error != ENOSPC); - REMOVE_DEBUG_TRACE(__LINE__); - xfs_trans_cancel(tp, 0); - return error; + cancel_flags = 0; + goto out_trans_cancel; } error = xfs_lock_dir_and_entry(dp, ip); - if (error) { - REMOVE_DEBUG_TRACE(__LINE__); - xfs_trans_cancel(tp, cancel_flags); - goto std_return; - } + if (error) + goto out_trans_cancel; /* * At this point, we've gotten both the directory and the entry @@ -2206,6 +2202,21 @@ xfs_remove( IHOLD(dp); xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); + /* + * If we're removing a directory perform some additional validation. + */ + if (is_dir) { + ASSERT(ip->i_d.di_nlink >= 2); + if (ip->i_d.di_nlink != 2) { + error = XFS_ERROR(ENOTEMPTY); + goto out_trans_cancel; + } + if (!xfs_dir_isempty(ip)) { + error = XFS_ERROR(ENOTEMPTY); + goto out_trans_cancel; + } + } + /* * Entry must exist since we did a lookup in xfs_lock_dir_and_entry. */ @@ -2214,39 +2225,64 @@ xfs_remove( &first_block, &free_list, resblks); if (error) { ASSERT(error != ENOENT); - REMOVE_DEBUG_TRACE(__LINE__); - goto error1; + goto out_bmap_cancel; } xfs_ichgtime(dp, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG); + /* + * Bump the in memory generation count on the parent + * directory so that other can know that it has changed. + */ dp->i_gen++; xfs_trans_log_inode(tp, dp, XFS_ILOG_CORE); - error = xfs_droplink(tp, ip); - if (error) { - REMOVE_DEBUG_TRACE(__LINE__); - goto error1; + if (is_dir) { + /* + * Drop the link from ip's "..". + */ + error = xfs_droplink(tp, dp); + if (error) + goto out_bmap_cancel; + + /* + * Drop the link from dp to ip. + */ + error = xfs_droplink(tp, ip); + if (error) + goto out_bmap_cancel; + } else { + /* + * When removing a non-directory we need to log the parent + * inode here for the i_gen update. For a directory this is + * done implicitly by the xfs_droplink call for the ".." entry. + */ + xfs_trans_log_inode(tp, dp, XFS_ILOG_CORE); } - /* Determine if this is the last link while + /* + * Drop the "." link from ip to self. + */ + error = xfs_droplink(tp, ip); + if (error) + goto out_bmap_cancel; + + /* + * Determine if this is the last link while * we are in the transaction. */ - link_zero = (ip)->i_d.di_nlink==0; + link_zero = (ip->i_d.di_nlink == 0); /* * If this is a synchronous mount, make sure that the * remove transaction goes to disk before returning to * the user. */ - if (mp->m_flags & (XFS_MOUNT_WSYNC|XFS_MOUNT_DIRSYNC)) { + if (mp->m_flags & (XFS_MOUNT_WSYNC|XFS_MOUNT_DIRSYNC)) xfs_trans_set_sync(tp); - } error = xfs_bmap_finish(&tp, &free_list, &committed); - if (error) { - REMOVE_DEBUG_TRACE(__LINE__); - goto error_rele; - } + if (error) + goto out_bmap_cancel; error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES); if (error) @@ -2258,38 +2294,26 @@ xfs_remove( * will get killed on last close in xfs_close() so we don't * have to worry about that. */ - if (link_zero && xfs_inode_is_filestream(ip)) + if (!is_dir && link_zero && xfs_inode_is_filestream(ip)) xfs_filestream_deassociate(ip); xfs_itrace_exit(ip); + xfs_itrace_exit(dp); -/* Fall through to std_return with error = 0 */ std_return: if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTREMOVE)) { - (void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE, - dp, DM_RIGHT_NULL, - NULL, DM_RIGHT_NULL, - name->name, NULL, ip->i_d.di_mode, error, 0); + XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE, dp, DM_RIGHT_NULL, + NULL, DM_RIGHT_NULL, name->name, NULL, + ip->i_d.di_mode, error, 0); } - return error; - error1: - xfs_bmap_cancel(&free_list); - cancel_flags |= XFS_TRANS_ABORT; - xfs_trans_cancel(tp, cancel_flags); - goto std_return; + return error; - error_rele: - /* - * In this case make sure to not release the inode until after - * the current transaction is aborted. Releasing it beforehand - * can cause us to go to xfs_inactive and start a recursive - * transaction which can easily deadlock with the current one. - */ + out_bmap_cancel: xfs_bmap_cancel(&free_list); cancel_flags |= XFS_TRANS_ABORT; + out_trans_cancel: xfs_trans_cancel(tp, cancel_flags); - goto std_return; } @@ -2655,186 +2679,6 @@ std_return: goto std_return; } -int -xfs_rmdir( - xfs_inode_t *dp, - struct xfs_name *name, - xfs_inode_t *cdp) -{ - xfs_mount_t *mp = dp->i_mount; - xfs_trans_t *tp; - int error; - xfs_bmap_free_t free_list; - xfs_fsblock_t first_block; - int cancel_flags; - int committed; - int last_cdp_link; - uint resblks; - - xfs_itrace_entry(dp); - - if (XFS_FORCED_SHUTDOWN(mp)) - return XFS_ERROR(EIO); - - if (DM_EVENT_ENABLED(dp, DM_EVENT_REMOVE)) { - error = XFS_SEND_NAMESP(mp, DM_EVENT_REMOVE, - dp, DM_RIGHT_NULL, - NULL, DM_RIGHT_NULL, name->name, - NULL, cdp->i_d.di_mode, 0, 0); - if (error) - return XFS_ERROR(error); - } - - /* - * Get the dquots for the inodes. - */ - error = XFS_QM_DQATTACH(mp, dp, 0); - if (!error) - error = XFS_QM_DQATTACH(mp, cdp, 0); - if (error) { - REMOVE_DEBUG_TRACE(__LINE__); - goto std_return; - } - - tp = xfs_trans_alloc(mp, XFS_TRANS_RMDIR); - cancel_flags = XFS_TRANS_RELEASE_LOG_RES; - /* - * We try to get the real space reservation first, - * allowing for directory btree deletion(s) implying - * possible bmap insert(s). If we can't get the space - * reservation then we use 0 instead, and avoid the bmap - * btree insert(s) in the directory code by, if the bmap - * insert tries to happen, instead trimming the LAST - * block from the directory. - */ - resblks = XFS_REMOVE_SPACE_RES(mp); - error = xfs_trans_reserve(tp, resblks, XFS_REMOVE_LOG_RES(mp), 0, - XFS_TRANS_PERM_LOG_RES, XFS_DEFAULT_LOG_COUNT); - if (error == ENOSPC) { - resblks = 0; - error = xfs_trans_reserve(tp, 0, XFS_REMOVE_LOG_RES(mp), 0, - XFS_TRANS_PERM_LOG_RES, XFS_DEFAULT_LOG_COUNT); - } - if (error) { - ASSERT(error != ENOSPC); - cancel_flags = 0; - goto error_return; - } - XFS_BMAP_INIT(&free_list, &first_block); - - /* - * Now lock the child directory inode and the parent directory - * inode in the proper order. This will take care of validating - * that the directory entry for the child directory inode has - * not changed while we were obtaining a log reservation. - */ - error = xfs_lock_dir_and_entry(dp, cdp); - if (error) { - xfs_trans_cancel(tp, cancel_flags); - goto std_return; - } - - IHOLD(dp); - xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL); - - IHOLD(cdp); - xfs_trans_ijoin(tp, cdp, XFS_ILOCK_EXCL); - - ASSERT(cdp->i_d.di_nlink >= 2); - if (cdp->i_d.di_nlink != 2) { - error = XFS_ERROR(ENOTEMPTY); - goto error_return; - } - if (!xfs_dir_isempty(cdp)) { - error = XFS_ERROR(ENOTEMPTY); - goto error_return; - } - - error = xfs_dir_removename(tp, dp, name, cdp->i_ino, - &first_block, &free_list, resblks); - if (error) - goto error1; - - xfs_ichgtime(dp, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG); - - /* - * Bump the in memory generation count on the parent - * directory so that other can know that it has changed. - */ - dp->i_gen++; - - /* - * Drop the link from cdp's "..". - */ - error = xfs_droplink(tp, dp); - if (error) { - goto error1; - } - - /* - * Drop the link from dp to cdp. - */ - error = xfs_droplink(tp, cdp); - if (error) { - goto error1; - } - - /* - * Drop the "." link from cdp to self. - */ - error = xfs_droplink(tp, cdp); - if (error) { - goto error1; - } - - /* Determine these before committing transaction */ - last_cdp_link = (cdp)->i_d.di_nlink==0; - - /* - * If this is a synchronous mount, make sure that the - * rmdir transaction goes to disk before returning to - * the user. - */ - if (mp->m_flags & (XFS_MOUNT_WSYNC|XFS_MOUNT_DIRSYNC)) { - xfs_trans_set_sync(tp); - } - - error = xfs_bmap_finish (&tp, &free_list, &committed); - if (error) { - xfs_bmap_cancel(&free_list); - xfs_trans_cancel(tp, (XFS_TRANS_RELEASE_LOG_RES | - XFS_TRANS_ABORT)); - goto std_return; - } - - error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES); - if (error) { - goto std_return; - } - - - /* Fall through to std_return with error = 0 or the errno - * from xfs_trans_commit. */ - std_return: - if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTREMOVE)) { - (void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE, - dp, DM_RIGHT_NULL, - NULL, DM_RIGHT_NULL, - name->name, NULL, cdp->i_d.di_mode, - error, 0); - } - return error; - - error1: - xfs_bmap_cancel(&free_list); - cancel_flags |= XFS_TRANS_ABORT; - /* FALLTHROUGH */ - - error_return: - xfs_trans_cancel(tp, cancel_flags); - goto std_return; -} - int xfs_symlink( xfs_inode_t *dp, diff --git a/fs/xfs/xfs_vnodeops.h b/fs/xfs/xfs_vnodeops.h index 7e9a8b241f21..454fa9a3e526 100644 --- a/fs/xfs/xfs_vnodeops.h +++ b/fs/xfs/xfs_vnodeops.h @@ -31,8 +31,6 @@ int xfs_link(struct xfs_inode *tdp, struct xfs_inode *sip, struct xfs_name *target_name); int xfs_mkdir(struct xfs_inode *dp, struct xfs_name *dir_name, mode_t mode, struct xfs_inode **ipp, struct cred *credp); -int xfs_rmdir(struct xfs_inode *dp, struct xfs_name *name, - struct xfs_inode *cdp); int xfs_readdir(struct xfs_inode *dp, void *dirent, size_t bufsize, xfs_off_t *offset, filldir_t filldir); int xfs_symlink(struct xfs_inode *dp, struct xfs_name *link_name, -- cgit v1.2.3 From e5700704b2b0853c059e424284cceeff3032ea28 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 23 Jun 2008 13:25:25 +1000 Subject: [XFS] Don't update i_size for directories and special files The core kernel uses vfs_getattr to look at the inode size and similar attributes, so there is no need to keep i_size uptodate for directories or special files. This means we can remove xfs_validate_fields because the I/O path already keeps i_size uptodate for regular files. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31336a Signed-off-by: Christoph Hellwig Signed-off-by: Barry Naujok Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_iops.c | 61 ++++++++++----------------------------------- 1 file changed, 13 insertions(+), 48 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 1f89c19cd4c4..7b42569968fe 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -181,23 +181,6 @@ xfs_ichgtime_fast( mark_inode_dirty_sync(inode); } - -/* - * Pull the link count and size up from the xfs inode to the linux inode - */ -STATIC void -xfs_validate_fields( - struct inode *inode) -{ - struct xfs_inode *ip = XFS_I(inode); - loff_t size; - - /* we're under i_sem so i_size can't change under us */ - size = XFS_ISIZE(ip); - if (i_size_read(inode) != size) - i_size_write(inode, size); -} - /* * Hook in SELinux. This is not quite correct yet, what we really need * here (as we do for default ACLs) is a mechanism by which creation of @@ -331,10 +314,7 @@ xfs_vn_mknod( } - if (S_ISDIR(mode)) - xfs_validate_fields(inode); d_instantiate(dentry, inode); - xfs_validate_fields(dir); return -error; out_cleanup_inode: @@ -450,7 +430,6 @@ xfs_vn_link( } xfs_iflags_set(XFS_I(dir), XFS_IMODIFIED); - xfs_validate_fields(inode); d_instantiate(dentry, inode); return 0; } @@ -460,26 +439,23 @@ xfs_vn_unlink( struct inode *dir, struct dentry *dentry) { - struct inode *inode; struct xfs_name name; int error; - inode = dentry->d_inode; xfs_dentry_to_name(&name, dentry); - error = xfs_remove(XFS_I(dir), &name, XFS_I(inode)); - if (likely(!error)) { - xfs_validate_fields(dir); /* size needs update */ - xfs_validate_fields(inode); - /* - * With unlink, the VFS makes the dentry "negative": no inode, - * but still hashed. This is incompatible with case-insensitive - * mode, so invalidate (unhash) the dentry in CI-mode. - */ - if (xfs_sb_version_hasasciici(&XFS_M(dir->i_sb)->m_sb)) - d_invalidate(dentry); - } - return -error; + error = -xfs_remove(XFS_I(dir), &name, XFS_I(dentry->d_inode)); + if (error) + return error; + + /* + * With unlink, the VFS makes the dentry "negative": no inode, + * but still hashed. This is incompatible with case-insensitive + * mode, so invalidate (unhash) the dentry in CI-mode. + */ + if (xfs_sb_version_hasasciici(&XFS_M(dir->i_sb)->m_sb)) + d_invalidate(dentry); + return 0; } STATIC int @@ -509,8 +485,6 @@ xfs_vn_symlink( goto out_cleanup_inode; d_instantiate(dentry, inode); - xfs_validate_fields(dir); - xfs_validate_fields(inode); return 0; out_cleanup_inode: @@ -529,22 +503,13 @@ xfs_vn_rename( struct inode *new_inode = ndentry->d_inode; struct xfs_name oname; struct xfs_name nname; - int error; xfs_dentry_to_name(&oname, odentry); xfs_dentry_to_name(&nname, ndentry); - error = xfs_rename(XFS_I(odir), &oname, XFS_I(odentry->d_inode), + return -xfs_rename(XFS_I(odir), &oname, XFS_I(odentry->d_inode), XFS_I(ndir), &nname, new_inode ? XFS_I(new_inode) : NULL); - if (likely(!error)) { - if (new_inode) - xfs_validate_fields(new_inode); - xfs_validate_fields(odir); - if (ndir != odir) - xfs_validate_fields(ndir); - } - return -error; } /* -- cgit v1.2.3 From 90bb7ab077a63facbe3aa0b9e3763a0cb956a4c1 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Mon, 23 Jun 2008 13:25:38 +1000 Subject: [XFS] Fix returning case-preserved name with CI node form directories xfs_dir2_node_lookup() calls xfs_da_node_lookup_int() which iterates through leaf blocks containing the matching hash value for the name being looked up. Inside xfs_da_node_lookup_int(), it calls the xfs_dir2_leafn_lookup_for_entry() for each leaf block. xfs_dir2_leafn_lookup_for_entry() iterates through each matching hash/offset pair doing a name comparison to find the matching dirent. For CI mode, the state->extrablk retains the details of the block that has the CI match so xfs_dir2_node_lookup() can return the case-preserved name. The original implementation didn't retain the xfs_da_buf_t properly, so the lookup was returning a bogus name to be stored in the dentry. In the case of unlink, the bad name was passed and in debug mode, ASSERTed when it can't find the entry. SGI-PV: 983284 SGI-Modid: xfs-linux-melb:xfs-kern:31337a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_dir2_node.c | 69 +++++++++++++++++++++++++++++++------------------- 1 file changed, 43 insertions(+), 26 deletions(-) diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c index 1b5430223461..fa6c3a5ddbc6 100644 --- a/fs/xfs/xfs_dir2_node.c +++ b/fs/xfs/xfs_dir2_node.c @@ -549,7 +549,6 @@ xfs_dir2_leafn_lookup_for_entry( xfs_dir2_data_entry_t *dep; /* data block entry */ xfs_inode_t *dp; /* incore directory inode */ int error; /* error return value */ - int di = -1; /* data entry index */ int index; /* leaf entry index */ xfs_dir2_leaf_t *leaf; /* leaf structure */ xfs_dir2_leaf_entry_t *lep; /* leaf entry */ @@ -577,7 +576,6 @@ xfs_dir2_leafn_lookup_for_entry( if (state->extravalid) { curbp = state->extrablk.bp; curdb = state->extrablk.blkno; - di = state->extrablk.index; } /* * Loop over leaf entries with the right hash value. @@ -602,17 +600,27 @@ xfs_dir2_leafn_lookup_for_entry( */ if (newdb != curdb) { /* - * If we had a block before, drop it. + * If we had a block before that we aren't saving + * for a CI name, drop it */ - if (curbp) + if (curbp && (args->cmpresult == XFS_CMP_DIFFERENT || + curdb != state->extrablk.blkno)) xfs_da_brelse(tp, curbp); /* - * Read the data block. + * If needing the block that is saved with a CI match, + * use it otherwise read in the new data block. */ - error = xfs_da_read_buf(tp, dp, xfs_dir2_db_to_da(mp, - newdb), -1, &curbp, XFS_DATA_FORK); - if (error) - return error; + if (args->cmpresult != XFS_CMP_DIFFERENT && + newdb == state->extrablk.blkno) { + ASSERT(state->extravalid); + curbp = state->extrablk.bp; + } else { + error = xfs_da_read_buf(tp, dp, + xfs_dir2_db_to_da(mp, newdb), + -1, &curbp, XFS_DATA_FORK); + if (error) + return error; + } xfs_dir2_data_check(dp, curbp); curdb = newdb; } @@ -624,38 +632,47 @@ xfs_dir2_leafn_lookup_for_entry( /* * Compare the entry and if it's an exact match, return * EEXIST immediately. If it's the first case-insensitive - * match, store the inode number and continue looking. + * match, store the block & inode number and continue looking. */ cmp = mp->m_dirnameops->compname(args, dep->name, dep->namelen); if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) { + /* If there is a CI match block, drop it */ + if (args->cmpresult != XFS_CMP_DIFFERENT && + curdb != state->extrablk.blkno) + xfs_da_brelse(tp, state->extrablk.bp); args->cmpresult = cmp; args->inumber = be64_to_cpu(dep->inumber); - di = (int)((char *)dep - (char *)curbp->data); - error = EEXIST; + *indexp = index; + state->extravalid = 1; + state->extrablk.bp = curbp; + state->extrablk.blkno = curdb; + state->extrablk.index = (int)((char *)dep - + (char *)curbp->data); + state->extrablk.magic = XFS_DIR2_DATA_MAGIC; if (cmp == XFS_CMP_EXACT) - goto out; + return XFS_ERROR(EEXIST); } } - /* Didn't find an exact match. */ - error = ENOENT; ASSERT(index == be16_to_cpu(leaf->hdr.count) || (args->op_flags & XFS_DA_OP_OKNOENT)); -out: if (curbp) { - /* Giving back a data block. */ - state->extravalid = 1; - state->extrablk.bp = curbp; - state->extrablk.index = di; - state->extrablk.blkno = curdb; - state->extrablk.magic = XFS_DIR2_DATA_MAGIC; + if (args->cmpresult == XFS_CMP_DIFFERENT) { + /* Giving back last used data block. */ + state->extravalid = 1; + state->extrablk.bp = curbp; + state->extrablk.index = -1; + state->extrablk.blkno = curdb; + state->extrablk.magic = XFS_DIR2_DATA_MAGIC; + } else { + /* If the curbp is not the CI match block, drop it */ + if (state->extrablk.bp != curbp) + xfs_da_brelse(tp, curbp); + } } else { state->extravalid = 0; } - /* - * Return the index, that will be the deletion point for remove/replace. - */ *indexp = index; - return XFS_ERROR(error); + return XFS_ERROR(ENOENT); } /* -- cgit v1.2.3 From 6bd8fc8a55cba263bab0b1c24786e95c5a2dc720 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Mon, 23 Jun 2008 13:25:46 +1000 Subject: [XFS] Convert ASSERTs to XFS_WANT_CORRUPTED_GOTOs ASSERTs are no good to us on a non-debug build so use XFS_WANT_CORRUPTED_GOTOs to report extent btree corruption ASAP. SGI-PV: 983500 SGI-Modid: xfs-linux-melb:xfs-kern:31338a Signed-off-by: Lachlan McIlroy Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_bmap.c | 101 +++++++++++++++++++++++++++--------------------------- 1 file changed, 51 insertions(+), 50 deletions(-) diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index a612a90aae4a..c21e01a9b2dd 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -428,7 +428,8 @@ xfs_bmap_add_attrfork_btree( cur->bc_private.b.firstblock = *firstblock; if ((error = xfs_bmbt_lookup_ge(cur, 0, 0, 0, &stat))) goto error0; - ASSERT(stat == 1); /* must be at least one entry */ + /* must be at least one entry */ + XFS_WANT_CORRUPTED_GOTO(stat == 1, error0); if ((error = xfs_bmbt_newroot(cur, flags, &stat))) goto error0; if (stat == 0) { @@ -816,13 +817,13 @@ xfs_bmap_add_extent_delay_real( RIGHT.br_startblock, RIGHT.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_delete(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_decrement(cur, 0, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, LEFT.br_startoff, LEFT.br_startblock, LEFT.br_blockcount + @@ -860,7 +861,7 @@ xfs_bmap_add_extent_delay_real( LEFT.br_startblock, LEFT.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, LEFT.br_startoff, LEFT.br_startblock, LEFT.br_blockcount + @@ -895,7 +896,7 @@ xfs_bmap_add_extent_delay_real( RIGHT.br_startblock, RIGHT.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, PREV.br_startoff, new->br_startblock, PREV.br_blockcount + @@ -928,11 +929,11 @@ xfs_bmap_add_extent_delay_real( new->br_startblock, new->br_blockcount, &i))) goto done; - ASSERT(i == 0); + XFS_WANT_CORRUPTED_GOTO(i == 0, done); cur->bc_rec.b.br_state = XFS_EXT_NORM; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } *dnew = 0; /* DELTA: The in-core extent described by new changed type. */ @@ -963,7 +964,7 @@ xfs_bmap_add_extent_delay_real( LEFT.br_startblock, LEFT.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, LEFT.br_startoff, LEFT.br_startblock, LEFT.br_blockcount + @@ -1004,11 +1005,11 @@ xfs_bmap_add_extent_delay_real( new->br_startblock, new->br_blockcount, &i))) goto done; - ASSERT(i == 0); + XFS_WANT_CORRUPTED_GOTO(i == 0, done); cur->bc_rec.b.br_state = XFS_EXT_NORM; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS && ip->i_d.di_nextents > ip->i_df.if_ext_max) { @@ -1054,7 +1055,7 @@ xfs_bmap_add_extent_delay_real( RIGHT.br_startblock, RIGHT.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, new->br_startoff, new->br_startblock, new->br_blockcount + @@ -1094,11 +1095,11 @@ xfs_bmap_add_extent_delay_real( new->br_startblock, new->br_blockcount, &i))) goto done; - ASSERT(i == 0); + XFS_WANT_CORRUPTED_GOTO(i == 0, done); cur->bc_rec.b.br_state = XFS_EXT_NORM; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS && ip->i_d.di_nextents > ip->i_df.if_ext_max) { @@ -1149,11 +1150,11 @@ xfs_bmap_add_extent_delay_real( new->br_startblock, new->br_blockcount, &i))) goto done; - ASSERT(i == 0); + XFS_WANT_CORRUPTED_GOTO(i == 0, done); cur->bc_rec.b.br_state = XFS_EXT_NORM; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS && ip->i_d.di_nextents > ip->i_df.if_ext_max) { @@ -1377,19 +1378,19 @@ xfs_bmap_add_extent_unwritten_real( RIGHT.br_startblock, RIGHT.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_delete(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_decrement(cur, 0, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_delete(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_decrement(cur, 0, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, LEFT.br_startoff, LEFT.br_startblock, LEFT.br_blockcount + PREV.br_blockcount + @@ -1426,13 +1427,13 @@ xfs_bmap_add_extent_unwritten_real( PREV.br_startblock, PREV.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_delete(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_decrement(cur, 0, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, LEFT.br_startoff, LEFT.br_startblock, LEFT.br_blockcount + PREV.br_blockcount, @@ -1469,13 +1470,13 @@ xfs_bmap_add_extent_unwritten_real( RIGHT.br_startblock, RIGHT.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_delete(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_decrement(cur, 0, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, new->br_startoff, new->br_startblock, new->br_blockcount + RIGHT.br_blockcount, @@ -1508,7 +1509,7 @@ xfs_bmap_add_extent_unwritten_real( new->br_startblock, new->br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, new->br_startoff, new->br_startblock, new->br_blockcount, newext))) @@ -1549,7 +1550,7 @@ xfs_bmap_add_extent_unwritten_real( PREV.br_startblock, PREV.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, PREV.br_startoff + new->br_blockcount, PREV.br_startblock + new->br_blockcount, @@ -1596,7 +1597,7 @@ xfs_bmap_add_extent_unwritten_real( PREV.br_startblock, PREV.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, PREV.br_startoff + new->br_blockcount, PREV.br_startblock + new->br_blockcount, @@ -1606,7 +1607,7 @@ xfs_bmap_add_extent_unwritten_real( cur->bc_rec.b = *new; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } /* DELTA: One in-core extent is split in two. */ temp = PREV.br_startoff; @@ -1640,7 +1641,7 @@ xfs_bmap_add_extent_unwritten_real( PREV.br_startblock, PREV.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, PREV.br_startoff, PREV.br_startblock, PREV.br_blockcount - new->br_blockcount, @@ -1682,7 +1683,7 @@ xfs_bmap_add_extent_unwritten_real( PREV.br_startblock, PREV.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, PREV.br_startoff, PREV.br_startblock, PREV.br_blockcount - new->br_blockcount, @@ -1692,11 +1693,11 @@ xfs_bmap_add_extent_unwritten_real( new->br_startblock, new->br_blockcount, &i))) goto done; - ASSERT(i == 0); + XFS_WANT_CORRUPTED_GOTO(i == 0, done); cur->bc_rec.b.br_state = XFS_EXT_NORM; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } /* DELTA: One in-core extent is split in two. */ temp = PREV.br_startoff; @@ -1732,7 +1733,7 @@ xfs_bmap_add_extent_unwritten_real( PREV.br_startblock, PREV.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); /* new right extent - oldext */ if ((error = xfs_bmbt_update(cur, r[1].br_startoff, r[1].br_startblock, r[1].br_blockcount, @@ -1744,15 +1745,15 @@ xfs_bmap_add_extent_unwritten_real( cur->bc_rec.b = PREV; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_increment(cur, 0, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); /* new middle extent - newext */ cur->bc_rec.b = *new; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } /* DELTA: One in-core extent is split in three. */ temp = PREV.br_startoff; @@ -2097,13 +2098,13 @@ xfs_bmap_add_extent_hole_real( right.br_startblock, right.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_delete(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_decrement(cur, 0, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, left.br_startoff, left.br_startblock, left.br_blockcount + @@ -2139,7 +2140,7 @@ xfs_bmap_add_extent_hole_real( left.br_startblock, left.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, left.br_startoff, left.br_startblock, left.br_blockcount + @@ -2174,7 +2175,7 @@ xfs_bmap_add_extent_hole_real( right.br_startblock, right.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, new->br_startoff, new->br_startblock, new->br_blockcount + @@ -2208,11 +2209,11 @@ xfs_bmap_add_extent_hole_real( new->br_startblock, new->br_blockcount, &i))) goto done; - ASSERT(i == 0); + XFS_WANT_CORRUPTED_GOTO(i == 0, done); cur->bc_rec.b.br_state = new->br_state; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } /* DELTA: A new extent was added in a hole. */ temp = new->br_startoff; @@ -3131,7 +3132,7 @@ xfs_bmap_del_extent( got.br_startblock, got.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } da_old = da_new = 0; } else { @@ -3164,7 +3165,7 @@ xfs_bmap_del_extent( } if ((error = xfs_bmbt_delete(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); break; case 2: @@ -3268,7 +3269,7 @@ xfs_bmap_del_extent( got.br_startblock, temp, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); /* * Update the btree record back * to the original value. @@ -3289,7 +3290,7 @@ xfs_bmap_del_extent( error = XFS_ERROR(ENOSPC); goto done; } - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } else flags |= XFS_ILOG_FEXT(whichfork); XFS_IFORK_NEXT_SET(ip, whichfork, -- cgit v1.2.3 From ddea2d5246b4ffbe49bbfb700aa3dbe717eb0915 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Mon, 23 Jun 2008 13:25:53 +1000 Subject: [XFS] Always reset btree cursor after an insert After a btree insert operation a cursor can be invalid due to block splits and a maybe a new root block. We reset the cursor in xfs_bmbt_insert() in the cases where we think we need to but it isn't enough as we still see assertions. Just do what we do elsewhere and reset the cursor unconditionally. Also remove the fix to revalidate the original cursor in xfs_bmbt_insert(). SGI-PV: 983336 SGI-Modid: xfs-linux-melb:xfs-kern:31342a Signed-off-by: Lachlan McIlroy Signed-off-by: David Chinner --- fs/xfs/xfs_bmap.c | 13 ++++++++++--- fs/xfs/xfs_bmap_btree.c | 38 ++++---------------------------------- 2 files changed, 14 insertions(+), 37 deletions(-) diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index c21e01a9b2dd..cf4dee01983a 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -1746,11 +1746,18 @@ xfs_bmap_add_extent_unwritten_real( if ((error = xfs_bmbt_insert(cur, &i))) goto done; XFS_WANT_CORRUPTED_GOTO(i == 1, done); - if ((error = xfs_bmbt_increment(cur, 0, &i))) + /* + * Reset the cursor to the position of the new extent + * we are about to insert as we can't trust it after + * the previous insert. + */ + if ((error = xfs_bmbt_lookup_eq(cur, new->br_startoff, + new->br_startblock, new->br_blockcount, + &i))) goto done; - XFS_WANT_CORRUPTED_GOTO(i == 1, done); + XFS_WANT_CORRUPTED_GOTO(i == 0, done); /* new middle extent - newext */ - cur->bc_rec.b = *new; + cur->bc_rec.b.br_state = new->br_state; if ((error = xfs_bmbt_insert(cur, &i))) goto done; XFS_WANT_CORRUPTED_GOTO(i == 1, done); diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c index 4f0e849d973e..4aa2f11ba563 100644 --- a/fs/xfs/xfs_bmap_btree.c +++ b/fs/xfs/xfs_bmap_btree.c @@ -2029,22 +2029,8 @@ xfs_bmbt_increment( * Insert the current record at the point referenced by cur. * * A multi-level split of the tree on insert will invalidate the original - * cursor. It appears, however, that some callers assume that the cursor is - * always valid. Hence if we do a multi-level split we need to revalidate the - * cursor. - * - * When a split occurs, we will see a new cursor returned. Use that as a - * trigger to determine if we need to revalidate the original cursor. If we get - * a split, then use the original irec to lookup up the path of the record we - * just inserted. - * - * Note that the fact that the btree root is in the inode means that we can - * have the level of the tree change without a "split" occurring at the root - * level. What happens is that the root is migrated to an allocated block and - * the inode root is pointed to it. This means a single split can change the - * level of the tree (level 2 -> level 3) and invalidate the old cursor. Hence - * the level change should be accounted as a split so as to correctly trigger a - * revalidation of the old cursor. + * cursor. All callers of this function should assume that the cursor is + * no longer valid and revalidate it. */ int /* error */ xfs_bmbt_insert( @@ -2057,14 +2043,11 @@ xfs_bmbt_insert( xfs_fsblock_t nbno; xfs_btree_cur_t *ncur; xfs_bmbt_rec_t nrec; - xfs_bmbt_irec_t oirec; /* original irec */ xfs_btree_cur_t *pcur; - int splits = 0; XFS_BMBT_TRACE_CURSOR(cur, ENTRY); level = 0; nbno = NULLFSBLOCK; - oirec = cur->bc_rec.b; xfs_bmbt_disk_set_all(&nrec, &cur->bc_rec.b); ncur = NULL; pcur = cur; @@ -2073,13 +2056,11 @@ xfs_bmbt_insert( &i))) { if (pcur != cur) xfs_btree_del_cursor(pcur, XFS_BTREE_ERROR); - goto error0; + XFS_BMBT_TRACE_CURSOR(cur, ERROR); + return error; } XFS_WANT_CORRUPTED_GOTO(i == 1, error0); if (pcur != cur && (ncur || nbno == NULLFSBLOCK)) { - /* allocating a new root is effectively a split */ - if (cur->bc_nlevels != pcur->bc_nlevels) - splits++; cur->bc_nlevels = pcur->bc_nlevels; cur->bc_private.b.allocated += pcur->bc_private.b.allocated; @@ -2093,21 +2074,10 @@ xfs_bmbt_insert( xfs_btree_del_cursor(pcur, XFS_BTREE_NOERROR); } if (ncur) { - splits++; pcur = ncur; ncur = NULL; } } while (nbno != NULLFSBLOCK); - - if (splits > 1) { - /* revalidate the old cursor as we had a multi-level split */ - error = xfs_bmbt_lookup_eq(cur, oirec.br_startoff, - oirec.br_startblock, oirec.br_blockcount, &i); - if (error) - goto error0; - ASSERT(i == 1); - } - XFS_BMBT_TRACE_CURSOR(cur, EXIT); *stat = i; return 0; -- cgit v1.2.3 From f9e09f095f323948b26ba09638d2eb3b0578d094 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Mon, 23 Jun 2008 13:34:09 +1000 Subject: [XFS] Use the generic xattr methods. Add missing file fs/xfs/linux-2.6/xfs_xattr.c SGI-PV: 982343 SGI-Modid: xfs-linux-melb:xfs-kern:31234a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_xattr.c | 333 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 333 insertions(+) create mode 100644 fs/xfs/linux-2.6/xfs_xattr.c diff --git a/fs/xfs/linux-2.6/xfs_xattr.c b/fs/xfs/linux-2.6/xfs_xattr.c new file mode 100644 index 000000000000..b4acb68fc9f7 --- /dev/null +++ b/fs/xfs/linux-2.6/xfs_xattr.c @@ -0,0 +1,333 @@ +/* + * Copyright (C) 2008 Christoph Hellwig. + * Portions Copyright (C) 2000-2008 Silicon Graphics, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write the Free Software Foundation, + * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "xfs.h" +#include "xfs_da_btree.h" +#include "xfs_bmap_btree.h" +#include "xfs_inode.h" +#include "xfs_attr.h" +#include "xfs_attr_leaf.h" +#include "xfs_acl.h" +#include "xfs_vnodeops.h" + +#include +#include + + +/* + * ACL handling. Should eventually be moved into xfs_acl.c + */ + +static int +xfs_decode_acl(const char *name) +{ + if (strcmp(name, "posix_acl_access") == 0) + return _ACL_TYPE_ACCESS; + else if (strcmp(name, "posix_acl_default") == 0) + return _ACL_TYPE_DEFAULT; + return -EINVAL; +} + +/* + * Get system extended attributes which at the moment only + * includes Posix ACLs. + */ +static int +xfs_xattr_system_get(struct inode *inode, const char *name, + void *buffer, size_t size) +{ + int acl; + + acl = xfs_decode_acl(name); + if (acl < 0) + return acl; + + return xfs_acl_vget(inode, buffer, size, acl); +} + +static int +xfs_xattr_system_set(struct inode *inode, const char *name, + const void *value, size_t size, int flags) +{ + int error, acl; + + acl = xfs_decode_acl(name); + if (acl < 0) + return acl; + if (flags & XATTR_CREATE) + return -EINVAL; + + if (!value) + return xfs_acl_vremove(inode, acl); + + error = xfs_acl_vset(inode, (void *)value, size, acl); + if (!error) + vn_revalidate(inode); + return error; +} + +static struct xattr_handler xfs_xattr_system_handler = { + .prefix = XATTR_SYSTEM_PREFIX, + .get = xfs_xattr_system_get, + .set = xfs_xattr_system_set, +}; + + +/* + * Real xattr handling. The only difference between the namespaces is + * a flag passed to the low-level attr code. + */ + +static int +__xfs_xattr_get(struct inode *inode, const char *name, + void *value, size_t size, int xflags) +{ + struct xfs_inode *ip = XFS_I(inode); + int error, asize = size; + + if (strcmp(name, "") == 0) + return -EINVAL; + + /* Convert Linux syscall to XFS internal ATTR flags */ + if (!size) { + xflags |= ATTR_KERNOVAL; + value = NULL; + } + + error = -xfs_attr_get(ip, name, value, &asize, xflags); + if (error) + return error; + return asize; +} + +static int +__xfs_xattr_set(struct inode *inode, const char *name, const void *value, + size_t size, int flags, int xflags) +{ + struct xfs_inode *ip = XFS_I(inode); + + if (strcmp(name, "") == 0) + return -EINVAL; + + /* Convert Linux syscall to XFS internal ATTR flags */ + if (flags & XATTR_CREATE) + xflags |= ATTR_CREATE; + if (flags & XATTR_REPLACE) + xflags |= ATTR_REPLACE; + + if (!value) + return -xfs_attr_remove(ip, name, xflags); + return -xfs_attr_set(ip, name, (void *)value, size, xflags); +} + +static int +xfs_xattr_user_get(struct inode *inode, const char *name, + void *value, size_t size) +{ + return __xfs_xattr_get(inode, name, value, size, 0); +} + +static int +xfs_xattr_user_set(struct inode *inode, const char *name, + const void *value, size_t size, int flags) +{ + return __xfs_xattr_set(inode, name, value, size, flags, 0); +} + +static struct xattr_handler xfs_xattr_user_handler = { + .prefix = XATTR_USER_PREFIX, + .get = xfs_xattr_user_get, + .set = xfs_xattr_user_set, +}; + + +static int +xfs_xattr_trusted_get(struct inode *inode, const char *name, + void *value, size_t size) +{ + return __xfs_xattr_get(inode, name, value, size, ATTR_ROOT); +} + +static int +xfs_xattr_trusted_set(struct inode *inode, const char *name, + const void *value, size_t size, int flags) +{ + return __xfs_xattr_set(inode, name, value, size, flags, ATTR_ROOT); +} + +static struct xattr_handler xfs_xattr_trusted_handler = { + .prefix = XATTR_TRUSTED_PREFIX, + .get = xfs_xattr_trusted_get, + .set = xfs_xattr_trusted_set, +}; + + +static int +xfs_xattr_secure_get(struct inode *inode, const char *name, + void *value, size_t size) +{ + return __xfs_xattr_get(inode, name, value, size, ATTR_SECURE); +} + +static int +xfs_xattr_secure_set(struct inode *inode, const char *name, + const void *value, size_t size, int flags) +{ + return __xfs_xattr_set(inode, name, value, size, flags, ATTR_SECURE); +} + +static struct xattr_handler xfs_xattr_security_handler = { + .prefix = XATTR_SECURITY_PREFIX, + .get = xfs_xattr_secure_get, + .set = xfs_xattr_secure_set, +}; + + +struct xattr_handler *xfs_xattr_handlers[] = { + &xfs_xattr_user_handler, + &xfs_xattr_trusted_handler, + &xfs_xattr_security_handler, + &xfs_xattr_system_handler, + NULL +}; + +static unsigned int xfs_xattr_prefix_len(int flags) +{ + if (flags & XFS_ATTR_SECURE) + return sizeof("security"); + else if (flags & XFS_ATTR_ROOT) + return sizeof("trusted"); + else + return sizeof("user"); +} + +static const char *xfs_xattr_prefix(int flags) +{ + if (flags & XFS_ATTR_SECURE) + return xfs_xattr_security_handler.prefix; + else if (flags & XFS_ATTR_ROOT) + return xfs_xattr_trusted_handler.prefix; + else + return xfs_xattr_user_handler.prefix; +} + +static int +xfs_xattr_put_listent(struct xfs_attr_list_context *context, int flags, + char *name, int namelen, int valuelen, char *value) +{ + unsigned int prefix_len = xfs_xattr_prefix_len(flags); + char *offset; + int arraytop; + + ASSERT(context->count >= 0); + + /* + * Only show root namespace entries if we are actually allowed to + * see them. + */ + if ((flags & XFS_ATTR_ROOT) && !capable(CAP_SYS_ADMIN)) + return 0; + + arraytop = context->count + prefix_len + namelen + 1; + if (arraytop > context->firstu) { + context->count = -1; /* insufficient space */ + return 1; + } + offset = (char *)context->alist + context->count; + strncpy(offset, xfs_xattr_prefix(flags), prefix_len); + offset += prefix_len; + strncpy(offset, name, namelen); /* real name */ + offset += namelen; + *offset = '\0'; + context->count += prefix_len + namelen + 1; + return 0; +} + +static int +xfs_xattr_put_listent_sizes(struct xfs_attr_list_context *context, int flags, + char *name, int namelen, int valuelen, char *value) +{ + context->count += xfs_xattr_prefix_len(flags) + namelen + 1; + return 0; +} + +static int +list_one_attr(const char *name, const size_t len, void *data, + size_t size, ssize_t *result) +{ + char *p = data + *result; + + *result += len; + if (!size) + return 0; + if (*result > size) + return -ERANGE; + + strcpy(p, name); + return 0; +} + +ssize_t +xfs_vn_listxattr(struct dentry *dentry, char *data, size_t size) +{ + struct xfs_attr_list_context context; + struct attrlist_cursor_kern cursor = { 0 }; + struct inode *inode = dentry->d_inode; + int error; + + /* + * First read the regular on-disk attributes. + */ + memset(&context, 0, sizeof(context)); + context.dp = XFS_I(inode); + context.cursor = &cursor; + context.resynch = 1; + context.alist = data; + context.bufsize = size; + context.firstu = context.bufsize; + + if (size) + context.put_listent = xfs_xattr_put_listent; + else + context.put_listent = xfs_xattr_put_listent_sizes; + + xfs_attr_list_int(&context); + if (context.count < 0) + return -ERANGE; + + /* + * Then add the two synthetic ACL attributes. + */ + if (xfs_acl_vhasacl_access(inode)) { + error = list_one_attr(POSIX_ACL_XATTR_ACCESS, + strlen(POSIX_ACL_XATTR_ACCESS) + 1, + data, size, &context.count); + if (error) + return error; + } + + if (xfs_acl_vhasacl_default(inode)) { + error = list_one_attr(POSIX_ACL_XATTR_DEFAULT, + strlen(POSIX_ACL_XATTR_DEFAULT) + 1, + data, size, &context.count); + if (error) + return error; + } + + return context.count; +} -- cgit v1.2.3 From 07fe4dd48d046feeff8705a2a224a8fba050b1c6 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Fri, 27 Jun 2008 13:32:11 +1000 Subject: [XFS] Fix CI lookup in leaf-form directories Instead of comparing buffer pointers, compare buffer block numbers and don't keep buff SGI-PV: 983564 SGI-Modid: xfs-linux-melb:xfs-kern:31346a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_dir2_leaf.c | 49 +++++++++++++++++++++++++------------------------ 1 file changed, 25 insertions(+), 24 deletions(-) diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c index f110242d6dfc..93535992cb60 100644 --- a/fs/xfs/xfs_dir2_leaf.c +++ b/fs/xfs/xfs_dir2_leaf.c @@ -1321,8 +1321,8 @@ xfs_dir2_leaf_lookup_int( int *indexp, /* out: index in leaf block */ xfs_dabuf_t **dbpp) /* out: data buffer */ { - xfs_dir2_db_t curdb; /* current data block number */ - xfs_dabuf_t *dbp; /* data buffer */ + xfs_dir2_db_t curdb = -1; /* current data block number */ + xfs_dabuf_t *dbp = NULL; /* data buffer */ xfs_dir2_data_entry_t *dep; /* data entry */ xfs_inode_t *dp; /* incore directory inode */ int error; /* error return code */ @@ -1333,7 +1333,7 @@ xfs_dir2_leaf_lookup_int( xfs_mount_t *mp; /* filesystem mount point */ xfs_dir2_db_t newdb; /* new data block number */ xfs_trans_t *tp; /* transaction pointer */ - xfs_dabuf_t *cbp; /* case match data buffer */ + xfs_dir2_db_t cidb = -1; /* case match data block no. */ enum xfs_dacmp cmp; /* name compare result */ dp = args->dp; @@ -1342,11 +1342,10 @@ xfs_dir2_leaf_lookup_int( /* * Read the leaf block into the buffer. */ - if ((error = - xfs_da_read_buf(tp, dp, mp->m_dirleafblk, -1, &lbp, - XFS_DATA_FORK))) { + error = xfs_da_read_buf(tp, dp, mp->m_dirleafblk, -1, &lbp, + XFS_DATA_FORK); + if (error) return error; - } *lbpp = lbp; leaf = lbp->data; xfs_dir2_leaf_check(dp, lbp); @@ -1358,9 +1357,7 @@ xfs_dir2_leaf_lookup_int( * Loop over all the entries with the right hash value * looking to match the name. */ - cbp = NULL; - for (lep = &leaf->ents[index], dbp = NULL, curdb = -1; - index < be16_to_cpu(leaf->hdr.count) && + for (lep = &leaf->ents[index]; index < be16_to_cpu(leaf->hdr.count) && be32_to_cpu(lep->hashval) == args->hashval; lep++, index++) { /* @@ -1377,7 +1374,7 @@ xfs_dir2_leaf_lookup_int( * need to pitch the old one and read the new one. */ if (newdb != curdb) { - if (dbp != cbp) + if (dbp) xfs_da_brelse(tp, dbp); error = xfs_da_read_buf(tp, dp, xfs_dir2_db_to_da(mp, newdb), @@ -1403,35 +1400,39 @@ xfs_dir2_leaf_lookup_int( if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) { args->cmpresult = cmp; *indexp = index; - /* - * case exact match: release the stored CI buffer if it - * exists and return the current buffer. - */ + /* case exact match: return the current buffer. */ if (cmp == XFS_CMP_EXACT) { - if (cbp && cbp != dbp) - xfs_da_brelse(tp, cbp); *dbpp = dbp; return 0; } - cbp = dbp; + cidb = curdb; } } ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); /* - * Here, we can only be doing a lookup (not a rename or replace). - * If a case-insensitive match was found earlier, release the current - * buffer and return the stored CI matching buffer. + * Here, we can only be doing a lookup (not a rename or remove). + * If a case-insensitive match was found earlier, re-read the + * appropriate data block if required and return it. */ if (args->cmpresult == XFS_CMP_CASE) { - if (cbp != dbp) + ASSERT(cidb != -1); + if (cidb != curdb) { xfs_da_brelse(tp, dbp); - *dbpp = cbp; + error = xfs_da_read_buf(tp, dp, + xfs_dir2_db_to_da(mp, cidb), + -1, &dbp, XFS_DATA_FORK); + if (error) { + xfs_da_brelse(tp, lbp); + return error; + } + } + *dbpp = dbp; return 0; } /* * No match found, return ENOENT. */ - ASSERT(cbp == NULL); + ASSERT(cidb == -1); if (dbp) xfs_da_brelse(tp, dbp); xfs_da_brelse(tp, lbp); -- cgit v1.2.3 From 90ad58a83accbeb8de09de4a55d3e6b429767eae Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 27 Jun 2008 13:32:19 +1000 Subject: [XFS] Check for invalid flags in xfs_attrlist_by_handle. xfs_attrlist_by_handle should only take the ATTR_ flags for the root namespaces. The ATTR_KERN* flags may change at anytime and expect special preconditions that can't be guaranteed for userspace-originating requests. For example passing down ATTR_KERNNOVAL through xfs_attrlist_by_handle will hit an assert in debug builds currently. SGI-PV: 983677 SGI-Modid: xfs-linux-melb:xfs-kern:31351a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_ioctl.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index 01939ba2d8de..993f5720200a 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -468,6 +468,12 @@ xfs_attrlist_by_handle( if (al_hreq.buflen > XATTR_LIST_MAX) return -XFS_ERROR(EINVAL); + /* + * Reject flags, only allow namespaces. + */ + if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE)) + return -XFS_ERROR(EINVAL); + error = xfs_vget_fsop_handlereq(mp, parinode, &al_hreq.hreq, &inode); if (error) goto out; -- cgit v1.2.3 From e182f57ac019b034b40d16f3c6d8e86826aecd56 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 27 Jun 2008 13:32:31 +1000 Subject: [XFS] attrmulti cleanup xfs_attrmulti_by_handle currently request the size based on sizeof(attr_multiop_t) but should be using sizeof(xfs_attr_multiop_t) because that is what it is dealing with. Despite beeing wrong this actually harmless in practice because both structures are the same size on all platforms. But this sizeof was the only user of struct attr_multiop so we can just kill it. Also move the ATTR_OP_* defines xfs_attr.h into the struct xfs_attr_multiop defintion in xfs_fs.h because they are only used with that structure, and are part of the user ABI for the XFS_IOC_ATTRMULTI_BY_HANDLE ioctl. SGI-PV: 983508 SGI-Modid: xfs-linux-melb:xfs-kern:31352a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_ioctl.c | 2 +- fs/xfs/xfs_attr.h | 16 ---------------- fs/xfs/xfs_fs.h | 3 +++ 3 files changed, 4 insertions(+), 17 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index 993f5720200a..8eddaff36843 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -593,7 +593,7 @@ xfs_attrmulti_by_handle( goto out; error = E2BIG; - size = am_hreq.opcount * sizeof(attr_multiop_t); + size = am_hreq.opcount * sizeof(xfs_attr_multiop_t); if (!size || size > 16 * PAGE_SIZE) goto out_vn_rele; diff --git a/fs/xfs/xfs_attr.h b/fs/xfs/xfs_attr.h index 3115dcc67236..8b2d31c19e4d 100644 --- a/fs/xfs/xfs_attr.h +++ b/fs/xfs/xfs_attr.h @@ -84,22 +84,6 @@ typedef struct attrlist_ent { /* data from attr_list() */ ((attrlist_ent_t *) \ &((char *)buffer)[ ((attrlist_t *)(buffer))->al_offset[index] ]) -/* - * Multi-attribute operation vector. - */ -typedef struct attr_multiop { - int am_opcode; /* operation to perform (ATTR_OP_GET, etc.) */ - int am_error; /* [out arg] result of this sub-op (an errno) */ - char *am_attrname; /* attribute name to work with */ - char *am_attrvalue; /* [in/out arg] attribute value (raw bytes) */ - int am_length; /* [in/out arg] length of value */ - int am_flags; /* bitwise OR of attr API flags defined above */ -} attr_multiop_t; - -#define ATTR_OP_GET 1 /* return the indicated attr's value */ -#define ATTR_OP_SET 2 /* set/create the indicated attr/value pair */ -#define ATTR_OP_REMOVE 3 /* remove the indicated attr */ - /* * Kernel-internal version of the attrlist cursor. */ diff --git a/fs/xfs/xfs_fs.h b/fs/xfs/xfs_fs.h index 6ca749897c58..01c0cc88d3f3 100644 --- a/fs/xfs/xfs_fs.h +++ b/fs/xfs/xfs_fs.h @@ -372,6 +372,9 @@ typedef struct xfs_fsop_attrlist_handlereq { typedef struct xfs_attr_multiop { __u32 am_opcode; +#define ATTR_OP_GET 1 /* return the indicated attr's value */ +#define ATTR_OP_SET 2 /* set/create the indicated attr/value pair */ +#define ATTR_OP_REMOVE 3 /* remove the indicated attr */ __s32 am_error; void __user *am_attrname; void __user *am_attrvalue; -- cgit v1.2.3 From 4ddd8bb1d25f9cbb345e1f64a56c0f641a787ede Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 27 Jun 2008 13:32:53 +1000 Subject: [XFS] use minleft when allocating in xfs_bmbt_split() The bmap btree split code relies on a previous data extent allocation (from xfs_bmap_btalloc()) to find an AG that has sufficient space to perform a full btree split, when inserting the extent. When converting unwritten extents we don't allocate a data extent so a btree split will be the first allocation. In this case we need to set minleft so the allocator will pick an AG that has space to complete the split(s). SGI-PV: 983338 SGI-Modid: xfs-linux-melb:xfs-kern:31357a Signed-off-by: Lachlan McIlroy Signed-off-by: David Chinner --- fs/xfs/xfs_bmap_btree.c | 15 ++++++++++++++- fs/xfs/xfs_iomap.c | 10 ++++++++++ 2 files changed, 24 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c index 4aa2f11ba563..3fc09cd8d517 100644 --- a/fs/xfs/xfs_bmap_btree.c +++ b/fs/xfs/xfs_bmap_btree.c @@ -1493,12 +1493,25 @@ xfs_bmbt_split( left = XFS_BUF_TO_BMBT_BLOCK(lbp); args.fsbno = cur->bc_private.b.firstblock; args.firstblock = args.fsbno; + args.minleft = 0; if (args.fsbno == NULLFSBLOCK) { args.fsbno = lbno; args.type = XFS_ALLOCTYPE_START_BNO; + /* + * Make sure there is sufficient room left in the AG to + * complete a full tree split for an extent insert. If + * we are converting the middle part of an extent then + * we may need space for two tree splits. + * + * We are relying on the caller to make the correct block + * reservation for this operation to succeed. If the + * reservation amount is insufficient then we may fail a + * block allocation here and corrupt the filesystem. + */ + args.minleft = xfs_trans_get_block_res(args.tp); } else args.type = XFS_ALLOCTYPE_NEAR_BNO; - args.mod = args.minleft = args.alignment = args.total = args.isfl = + args.mod = args.alignment = args.total = args.isfl = args.userdata = args.minalignslop = 0; args.minlen = args.maxlen = args.prod = 1; args.wasdel = cur->bc_private.b.flags & XFS_BTCUR_BPRV_WASDEL; diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 7edcde691d1a..67f22b2b44b3 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -889,6 +889,16 @@ xfs_iomap_write_unwritten( count_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)offset + count); count_fsb = (xfs_filblks_t)(count_fsb - offset_fsb); + /* + * Reserve enough blocks in this transaction for two complete extent + * btree splits. We may be converting the middle part of an unwritten + * extent and in this case we will insert two new extents in the btree + * each of which could cause a full split. + * + * This reservation amount will be used in the first call to + * xfs_bmbt_split() to select an AG with enough space to satisfy the + * rest of the operation. + */ resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0) << 1; do { -- cgit v1.2.3 From b877e3d37dda0154868a3c78f02f38a1ec14ce79 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 27 Jun 2008 13:33:03 +1000 Subject: [XFS] Restore the lowspace extent allocator algorithm When free space is running low the extent allocator may choose to allocate an extent from an AG without leaving sufficient space for a btree split when inserting the new extent (see where xfs_bmap_btalloc() sets minleft to 0). In this case the allocator will enable the lowspace algorithm which is supposed to allow further allocations (such as btree splits and newroots) to allocate from sequential AGs. This algorithm has been broken for a long time and this patch restores its behaviour. SGI-PV: 983338 SGI-Modid: xfs-linux-melb:xfs-kern:31358a Signed-off-by: Lachlan McIlroy Signed-off-by: David Chinner --- fs/xfs/xfs_bmap.h | 13 ++++++++++++- fs/xfs/xfs_bmap_btree.c | 8 ++++++-- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h index 6ff70cda451c..9f3e3a836d15 100644 --- a/fs/xfs/xfs_bmap.h +++ b/fs/xfs/xfs_bmap.h @@ -54,12 +54,23 @@ typedef struct xfs_bmap_free_item /* * Header for free extent list. + * + * xbf_low is used by the allocator to activate the lowspace algorithm - + * when free space is running low the extent allocator may choose to + * allocate an extent from an AG without leaving sufficient space for + * a btree split when inserting the new extent. In this case the allocator + * will enable the lowspace algorithm which is supposed to allow further + * allocations (such as btree splits and newroots) to allocate from + * sequential AGs. In order to avoid locking AGs out of order the lowspace + * algorithm will start searching for free space from AG 0. If the correct + * transaction reservations have been made then this algorithm will eventually + * find all the space it needs. */ typedef struct xfs_bmap_free { xfs_bmap_free_item_t *xbf_first; /* list of to-be-free extents */ int xbf_count; /* count of items on list */ - int xbf_low; /* kludge: alloc in low mode */ + int xbf_low; /* alloc in low mode */ } xfs_bmap_free_t; #define XFS_BMAP_MAX_NMAP 4 diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c index 3fc09cd8d517..1140cef4ba99 100644 --- a/fs/xfs/xfs_bmap_btree.c +++ b/fs/xfs/xfs_bmap_btree.c @@ -1509,7 +1509,9 @@ xfs_bmbt_split( * block allocation here and corrupt the filesystem. */ args.minleft = xfs_trans_get_block_res(args.tp); - } else + } else if (cur->bc_private.b.flist->xbf_low) + args.type = XFS_ALLOCTYPE_START_BNO; + else args.type = XFS_ALLOCTYPE_NEAR_BNO; args.mod = args.alignment = args.total = args.isfl = args.userdata = args.minalignslop = 0; @@ -2237,7 +2239,9 @@ xfs_bmbt_newroot( #endif args.fsbno = be64_to_cpu(*pp); args.type = XFS_ALLOCTYPE_START_BNO; - } else + } else if (cur->bc_private.b.flist->xbf_low) + args.type = XFS_ALLOCTYPE_START_BNO; + else args.type = XFS_ALLOCTYPE_NEAR_BNO; if ((error = xfs_alloc_vextent(&args))) { XFS_BMBT_TRACE_CURSOR(cur, ERROR); -- cgit v1.2.3 From 313b5c767a044c7a0db5e773cb7aea70383b2627 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 27 Jun 2008 13:33:11 +1000 Subject: [XFS] Allow xfs_bmbt_split() to fallback to the lowspace allocator algorithm If xfs_bmbt_split() cannot find an AG with sufficient free space to satisfy a full extent btree split then fall back to the lowspace allocator algorithm. SGI-PV: 983338 SGI-Modid: xfs-linux-melb:xfs-kern:31359a Signed-off-by: Lachlan McIlroy Signed-off-by: David Chinner --- fs/xfs/xfs_bmap_btree.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c index 1140cef4ba99..23efad29a5cd 100644 --- a/fs/xfs/xfs_bmap_btree.c +++ b/fs/xfs/xfs_bmap_btree.c @@ -1525,6 +1525,21 @@ xfs_bmbt_split( XFS_BMBT_TRACE_CURSOR(cur, ERROR); return error; } + if (args.fsbno == NULLFSBLOCK && args.minleft) { + /* + * Could not find an AG with enough free space to satisfy + * a full btree split. Try again without minleft and if + * successful activate the lowspace algorithm. + */ + args.fsbno = 0; + args.type = XFS_ALLOCTYPE_FIRST_AG; + args.minleft = 0; + if ((error = xfs_alloc_vextent(&args))) { + XFS_BMBT_TRACE_CURSOR(cur, ERROR); + return error; + } + cur->bc_private.b.flist->xbf_low = 1; + } if (args.fsbno == NULLFSBLOCK) { XFS_BMBT_TRACE_CURSOR(cur, EXIT); *stat = 0; -- cgit v1.2.3 From 8f8670bb1cfa177d35c54e4cc96152dc425a7ab3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 27 Jun 2008 13:34:26 +1000 Subject: [XFS] Don't update mtime on rename source As reported by Michael-John Turner XFS updates the mtime on the source inode of a rename call in case it's a directory and changes the parent. This doesn't make any sense, is not mentioned in the standards and not performed by any other Linux filesystems so remove it. SGI-PV: 983684 SGI-Modid: xfs-linux-melb:xfs-kern:31364a Signed-off-by: Christoph Hellwig Signed-off-by: Barry Naujok Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_rename.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c index d8063e1ad298..d700dacdb10e 100644 --- a/fs/xfs/xfs_rename.c +++ b/fs/xfs/xfs_rename.c @@ -336,21 +336,17 @@ xfs_rename( ASSERT(error != EEXIST); if (error) goto abort_return; - xfs_ichgtime(src_ip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG); - - } else { - /* - * We always want to hit the ctime on the source inode. - * We do it in the if clause above for the 'new_parent && - * src_is_directory' case, and here we get all the other - * cases. This isn't strictly required by the standards - * since the source inode isn't really being changed, - * but old unix file systems did it and some incremental - * backup programs won't work without it. - */ - xfs_ichgtime(src_ip, XFS_ICHGTIME_CHG); } + /* + * We always want to hit the ctime on the source inode. + * + * This isn't strictly required by the standards since the source + * inode isn't really being changed, but old unix file systems did + * it and some incremental backup programs won't work without it. + */ + xfs_ichgtime(src_ip, XFS_ICHGTIME_CHG); + /* * Adjust the link count on src_dp. This is necessary when * renaming a directory, either within one parent when -- cgit v1.2.3 From 2edbddd5f46cc123b68c11179115041c54759fa2 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 27 Jun 2008 13:34:34 +1000 Subject: [XFS] Don't assert if trying to mount with blocksize > pagesize If we don't do the blocksize/PAGESIZE check before calling xfs_sb_validate_fsb_count() we can assert if we try to mount with a blocksize > pagesize. The assert is valid so leave it and just move the blocksize/pagesize check earlier. SGI-PV: 983734 SGI-Modid: xfs-linux-melb:xfs-kern:31365a Signed-off-by: Lachlan McIlroy Signed-off-by: David Chinner --- fs/xfs/xfs_mount.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 1bfaa204f689..6c5d1325e7f6 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -258,6 +258,19 @@ xfs_mount_validate_sb( return XFS_ERROR(EFSCORRUPTED); } + /* + * Until this is fixed only page-sized or smaller data blocks work. + */ + if (unlikely(sbp->sb_blocksize > PAGE_SIZE)) { + xfs_fs_mount_cmn_err(flags, + "file system with blocksize %d bytes", + sbp->sb_blocksize); + xfs_fs_mount_cmn_err(flags, + "only pagesize (%ld) or less will currently work.", + PAGE_SIZE); + return XFS_ERROR(ENOSYS); + } + if (xfs_sb_validate_fsb_count(sbp, sbp->sb_dblocks) || xfs_sb_validate_fsb_count(sbp, sbp->sb_rblocks)) { xfs_fs_mount_cmn_err(flags, @@ -279,19 +292,6 @@ xfs_mount_validate_sb( return XFS_ERROR(ENOSYS); } - /* - * Until this is fixed only page-sized or smaller data blocks work. - */ - if (unlikely(sbp->sb_blocksize > PAGE_SIZE)) { - xfs_fs_mount_cmn_err(flags, - "file system with blocksize %d bytes", - sbp->sb_blocksize); - xfs_fs_mount_cmn_err(flags, - "only pagesize (%ld) or less will currently work.", - PAGE_SIZE); - return XFS_ERROR(ENOSYS); - } - return 0; } -- cgit v1.2.3 From 136f8f21b6d564f553abe6130127d16fb50432d3 Mon Sep 17 00:00:00 2001 From: Tim Shimmin Date: Fri, 27 Jun 2008 13:34:42 +1000 Subject: [XFS] Fix up problem when CONFIG_XFS_POSIX_ACL is not set and yet we still can use the _ACL_TYPE_* definitions in linux-2.6/xfs_xattr.c. The forthcoming generic acl code will also fix this problem. SGI-PV: 982343 SGI-Modid: xfs-linux-melb:xfs-kern:31369a Signed-off-by: Tim Shimmin Signed-off-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_acl.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_acl.h b/fs/xfs/xfs_acl.h index 332a772461c4..323ee94cf831 100644 --- a/fs/xfs/xfs_acl.h +++ b/fs/xfs/xfs_acl.h @@ -46,6 +46,8 @@ typedef struct xfs_acl { #define SGI_ACL_FILE_SIZE (sizeof(SGI_ACL_FILE)-1) #define SGI_ACL_DEFAULT_SIZE (sizeof(SGI_ACL_DEFAULT)-1) +#define _ACL_TYPE_ACCESS 1 +#define _ACL_TYPE_DEFAULT 2 #ifdef CONFIG_XFS_POSIX_ACL @@ -66,8 +68,6 @@ extern int xfs_acl_vset(bhv_vnode_t *, void *, size_t, int); extern int xfs_acl_vget(bhv_vnode_t *, void *, size_t, int); extern int xfs_acl_vremove(bhv_vnode_t *, int); -#define _ACL_TYPE_ACCESS 1 -#define _ACL_TYPE_DEFAULT 2 #define _ACL_PERM_INVALID(perm) ((perm) & ~(ACL_READ|ACL_WRITE|ACL_EXECUTE)) #define _ACL_INHERIT(c,m,d) (xfs_acl_inherit(c,m,d)) -- cgit v1.2.3 From 9f8868ffb39c2f80ba69df4552cb530b6634f646 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 18 Jul 2008 17:11:46 +1000 Subject: [XFS] streamline init/exit path Currently the xfs module init/exit code is a mess. It's farmed out over a lot of function with very little error checking. This patch makes sure we propagate all initialization failures properly and clean up after them. Various runtime initializations are replaced with compile-time initializations where possible to make this easier. The exit path is similarly consolidated. There's now split out function to create/destroy the kmem zones and alloc/free the trace buffers. I've also changed the ktrace allocations to KM_MAYFAIL and handled errors resulting from that. And yes, we really should replace the XFS_*_TRACE ifdefs with a single XFS_TRACE.. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:31354a Signed-off-by: Christoph Hellwig Signed-off-by: Niv Sardi Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_stats.c | 15 +- fs/xfs/linux-2.6/xfs_stats.h | 11 +- fs/xfs/linux-2.6/xfs_super.c | 330 +++++++++++++++++++++++++++++++++++------- fs/xfs/linux-2.6/xfs_sysctl.c | 8 +- fs/xfs/linux-2.6/xfs_sysctl.h | 4 +- fs/xfs/support/uuid.c | 8 +- fs/xfs/support/uuid.h | 1 - fs/xfs/xfs_da_btree.c | 2 +- fs/xfs/xfs_error.c | 8 - fs/xfs/xfs_error.h | 1 - fs/xfs/xfs_filestream.c | 4 +- fs/xfs/xfs_mount.h | 3 - fs/xfs/xfs_mru_cache.c | 13 +- fs/xfs/xfs_vfsops.c | 131 ----------------- 14 files changed, 318 insertions(+), 221 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_stats.c b/fs/xfs/linux-2.6/xfs_stats.c index e480b6102051..3d5b67c075c7 100644 --- a/fs/xfs/linux-2.6/xfs_stats.c +++ b/fs/xfs/linux-2.6/xfs_stats.c @@ -98,12 +98,21 @@ xfs_read_xfsstats( return len; } -void +int xfs_init_procfs(void) { if (!proc_mkdir("fs/xfs", NULL)) - return; - create_proc_read_entry("fs/xfs/stat", 0, NULL, xfs_read_xfsstats, NULL); + goto out; + + if (!create_proc_read_entry("fs/xfs/stat", 0, NULL, + xfs_read_xfsstats, NULL)) + goto out_remove_entry; + return 0; + + out_remove_entry: + remove_proc_entry("fs/xfs", NULL); + out: + return -ENOMEM; } void diff --git a/fs/xfs/linux-2.6/xfs_stats.h b/fs/xfs/linux-2.6/xfs_stats.h index afd0b0d5fdb2..3fa753d7b700 100644 --- a/fs/xfs/linux-2.6/xfs_stats.h +++ b/fs/xfs/linux-2.6/xfs_stats.h @@ -134,7 +134,7 @@ DECLARE_PER_CPU(struct xfsstats, xfsstats); #define XFS_STATS_DEC(v) (per_cpu(xfsstats, current_cpu()).v--) #define XFS_STATS_ADD(v, inc) (per_cpu(xfsstats, current_cpu()).v += (inc)) -extern void xfs_init_procfs(void); +extern int xfs_init_procfs(void); extern void xfs_cleanup_procfs(void); @@ -144,8 +144,13 @@ extern void xfs_cleanup_procfs(void); # define XFS_STATS_DEC(count) # define XFS_STATS_ADD(count, inc) -static inline void xfs_init_procfs(void) { }; -static inline void xfs_cleanup_procfs(void) { }; +static inline int xfs_init_procfs(void) +{ + return 0 +}; +static inline void xfs_cleanup_procfs(void) +{ +}; #endif /* !CONFIG_PROC_FS */ diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 967603c46998..7c621dfee73d 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -53,6 +53,11 @@ #include "xfs_log_priv.h" #include "xfs_trans_priv.h" #include "xfs_filestream.h" +#include "xfs_da_btree.h" +#include "xfs_dir2_trace.h" +#include "xfs_extfree_item.h" +#include "xfs_mru_cache.h" +#include "xfs_inode_item.h" #include #include @@ -987,42 +992,6 @@ xfs_fs_inode_init_once( inode_init_once(vn_to_inode((bhv_vnode_t *)vnode)); } -STATIC int __init -xfs_init_zones(void) -{ - xfs_vnode_zone = kmem_zone_init_flags(sizeof(bhv_vnode_t), "xfs_vnode", - KM_ZONE_HWALIGN | KM_ZONE_RECLAIM | - KM_ZONE_SPREAD, - xfs_fs_inode_init_once); - if (!xfs_vnode_zone) - goto out; - - xfs_ioend_zone = kmem_zone_init(sizeof(xfs_ioend_t), "xfs_ioend"); - if (!xfs_ioend_zone) - goto out_destroy_vnode_zone; - - xfs_ioend_pool = mempool_create_slab_pool(4 * MAX_BUF_PER_PAGE, - xfs_ioend_zone); - if (!xfs_ioend_pool) - goto out_free_ioend_zone; - return 0; - - out_free_ioend_zone: - kmem_zone_destroy(xfs_ioend_zone); - out_destroy_vnode_zone: - kmem_zone_destroy(xfs_vnode_zone); - out: - return -ENOMEM; -} - -STATIC void -xfs_destroy_zones(void) -{ - mempool_destroy(xfs_ioend_pool); - kmem_zone_destroy(xfs_vnode_zone); - kmem_zone_destroy(xfs_ioend_zone); -} - /* * Attempt to flush the inode, this will actually fail * if the inode is pinned, but we dirty the inode again @@ -1939,9 +1908,235 @@ static struct file_system_type xfs_fs_type = { .fs_flags = FS_REQUIRES_DEV, }; +STATIC int __init +xfs_alloc_trace_bufs(void) +{ +#ifdef XFS_ALLOC_TRACE + xfs_alloc_trace_buf = ktrace_alloc(XFS_ALLOC_TRACE_SIZE, KM_MAYFAIL); + if (!xfs_alloc_trace_buf) + goto out; +#endif +#ifdef XFS_BMAP_TRACE + xfs_bmap_trace_buf = ktrace_alloc(XFS_BMAP_TRACE_SIZE, KM_MAYFAIL); + if (!xfs_bmap_trace_buf) + goto out_free_alloc_trace; +#endif +#ifdef XFS_BMBT_TRACE + xfs_bmbt_trace_buf = ktrace_alloc(XFS_BMBT_TRACE_SIZE, KM_MAYFAIL); + if (!xfs_bmbt_trace_buf) + goto out_free_bmap_trace; +#endif +#ifdef XFS_ATTR_TRACE + xfs_attr_trace_buf = ktrace_alloc(XFS_ATTR_TRACE_SIZE, KM_MAYFAIL); + if (!xfs_attr_trace_buf) + goto out_free_bmbt_trace; +#endif +#ifdef XFS_DIR2_TRACE + xfs_dir2_trace_buf = ktrace_alloc(XFS_DIR2_GTRACE_SIZE, KM_MAYFAIL); + if (!xfs_dir2_trace_buf) + goto out_free_attr_trace; +#endif + + return 0; + +#ifdef XFS_DIR2_TRACE + out_free_attr_trace: +#endif +#ifdef XFS_ATTR_TRACE + ktrace_free(xfs_attr_trace_buf); + out_free_bmbt_trace: +#endif +#ifdef XFS_BMBT_TRACE + ktrace_free(xfs_bmbt_trace_buf); + out_free_bmap_trace: +#endif +#ifdef XFS_BMAP_TRACE + ktrace_free(xfs_bmap_trace_buf); + out_free_alloc_trace: +#endif +#ifdef XFS_ALLOC_TRACE + ktrace_free(xfs_alloc_trace_buf); + out: +#endif + return -ENOMEM; +} + +STATIC void +xfs_free_trace_bufs(void) +{ +#ifdef XFS_DIR2_TRACE + ktrace_free(xfs_dir2_trace_buf); +#endif +#ifdef XFS_ATTR_TRACE + ktrace_free(xfs_attr_trace_buf); +#endif +#ifdef XFS_BMBT_TRACE + ktrace_free(xfs_bmbt_trace_buf); +#endif +#ifdef XFS_BMAP_TRACE + ktrace_free(xfs_bmap_trace_buf); +#endif +#ifdef XFS_ALLOC_TRACE + ktrace_free(xfs_alloc_trace_buf); +#endif +} + +STATIC int __init +xfs_init_zones(void) +{ + xfs_vnode_zone = kmem_zone_init_flags(sizeof(bhv_vnode_t), "xfs_vnode", + KM_ZONE_HWALIGN | KM_ZONE_RECLAIM | + KM_ZONE_SPREAD, + xfs_fs_inode_init_once); + if (!xfs_vnode_zone) + goto out; + + xfs_ioend_zone = kmem_zone_init(sizeof(xfs_ioend_t), "xfs_ioend"); + if (!xfs_ioend_zone) + goto out_destroy_vnode_zone; + + xfs_ioend_pool = mempool_create_slab_pool(4 * MAX_BUF_PER_PAGE, + xfs_ioend_zone); + if (!xfs_ioend_pool) + goto out_destroy_ioend_zone; + + xfs_log_ticket_zone = kmem_zone_init(sizeof(xlog_ticket_t), + "xfs_log_ticket"); + if (!xfs_log_ticket_zone) + goto out_destroy_ioend_pool; + + xfs_bmap_free_item_zone = kmem_zone_init(sizeof(xfs_bmap_free_item_t), + "xfs_bmap_free_item"); + if (!xfs_bmap_free_item_zone) + goto out_destroy_log_ticket_zone; + xfs_btree_cur_zone = kmem_zone_init(sizeof(xfs_btree_cur_t), + "xfs_btree_cur"); + if (!xfs_btree_cur_zone) + goto out_destroy_bmap_free_item_zone; + + xfs_da_state_zone = kmem_zone_init(sizeof(xfs_da_state_t), + "xfs_da_state"); + if (!xfs_da_state_zone) + goto out_destroy_btree_cur_zone; + + xfs_dabuf_zone = kmem_zone_init(sizeof(xfs_dabuf_t), "xfs_dabuf"); + if (!xfs_dabuf_zone) + goto out_destroy_da_state_zone; + + xfs_ifork_zone = kmem_zone_init(sizeof(xfs_ifork_t), "xfs_ifork"); + if (!xfs_ifork_zone) + goto out_destroy_dabuf_zone; + + xfs_trans_zone = kmem_zone_init(sizeof(xfs_trans_t), "xfs_trans"); + if (!xfs_trans_zone) + goto out_destroy_ifork_zone; + + /* + * The size of the zone allocated buf log item is the maximum + * size possible under XFS. This wastes a little bit of memory, + * but it is much faster. + */ + xfs_buf_item_zone = kmem_zone_init((sizeof(xfs_buf_log_item_t) + + (((XFS_MAX_BLOCKSIZE / XFS_BLI_CHUNK) / + NBWORD) * sizeof(int))), "xfs_buf_item"); + if (!xfs_buf_item_zone) + goto out_destroy_trans_zone; + + xfs_efd_zone = kmem_zone_init((sizeof(xfs_efd_log_item_t) + + ((XFS_EFD_MAX_FAST_EXTENTS - 1) * + sizeof(xfs_extent_t))), "xfs_efd_item"); + if (!xfs_efd_zone) + goto out_destroy_buf_item_zone; + + xfs_efi_zone = kmem_zone_init((sizeof(xfs_efi_log_item_t) + + ((XFS_EFI_MAX_FAST_EXTENTS - 1) * + sizeof(xfs_extent_t))), "xfs_efi_item"); + if (!xfs_efi_zone) + goto out_destroy_efd_zone; + + xfs_inode_zone = + kmem_zone_init_flags(sizeof(xfs_inode_t), "xfs_inode", + KM_ZONE_HWALIGN | KM_ZONE_RECLAIM | + KM_ZONE_SPREAD, NULL); + if (!xfs_inode_zone) + goto out_destroy_efi_zone; + + xfs_ili_zone = + kmem_zone_init_flags(sizeof(xfs_inode_log_item_t), "xfs_ili", + KM_ZONE_SPREAD, NULL); + if (!xfs_ili_zone) + goto out_destroy_inode_zone; + +#ifdef CONFIG_XFS_POSIX_ACL + xfs_acl_zone = kmem_zone_init(sizeof(xfs_acl_t), "xfs_acl"); + if (!xfs_acl_zone) + goto out_destroy_ili_zone; +#endif + + return 0; + +#ifdef CONFIG_XFS_POSIX_ACL + out_destroy_ili_zone: +#endif + kmem_zone_destroy(xfs_ili_zone); + out_destroy_inode_zone: + kmem_zone_destroy(xfs_inode_zone); + out_destroy_efi_zone: + kmem_zone_destroy(xfs_efi_zone); + out_destroy_efd_zone: + kmem_zone_destroy(xfs_efd_zone); + out_destroy_buf_item_zone: + kmem_zone_destroy(xfs_buf_item_zone); + out_destroy_trans_zone: + kmem_zone_destroy(xfs_trans_zone); + out_destroy_ifork_zone: + kmem_zone_destroy(xfs_ifork_zone); + out_destroy_dabuf_zone: + kmem_zone_destroy(xfs_dabuf_zone); + out_destroy_da_state_zone: + kmem_zone_destroy(xfs_da_state_zone); + out_destroy_btree_cur_zone: + kmem_zone_destroy(xfs_btree_cur_zone); + out_destroy_bmap_free_item_zone: + kmem_zone_destroy(xfs_bmap_free_item_zone); + out_destroy_log_ticket_zone: + kmem_zone_destroy(xfs_log_ticket_zone); + out_destroy_ioend_pool: + mempool_destroy(xfs_ioend_pool); + out_destroy_ioend_zone: + kmem_zone_destroy(xfs_ioend_zone); + out_destroy_vnode_zone: + kmem_zone_destroy(xfs_vnode_zone); + out: + return -ENOMEM; +} + +STATIC void +xfs_destroy_zones(void) +{ +#ifdef CONFIG_XFS_POSIX_ACL + kmem_zone_destroy(xfs_acl_zone); +#endif + kmem_zone_destroy(xfs_ili_zone); + kmem_zone_destroy(xfs_inode_zone); + kmem_zone_destroy(xfs_efi_zone); + kmem_zone_destroy(xfs_efd_zone); + kmem_zone_destroy(xfs_buf_item_zone); + kmem_zone_destroy(xfs_trans_zone); + kmem_zone_destroy(xfs_ifork_zone); + kmem_zone_destroy(xfs_dabuf_zone); + kmem_zone_destroy(xfs_da_state_zone); + kmem_zone_destroy(xfs_btree_cur_zone); + kmem_zone_destroy(xfs_bmap_free_item_zone); + kmem_zone_destroy(xfs_log_ticket_zone); + mempool_destroy(xfs_ioend_pool); + kmem_zone_destroy(xfs_ioend_zone); + kmem_zone_destroy(xfs_vnode_zone); + +} STATIC int __init -init_xfs_fs( void ) +init_xfs_fs(void) { int error; static char message[] __initdata = KERN_INFO \ @@ -1950,42 +2145,73 @@ init_xfs_fs( void ) printk(message); ktrace_init(64); + vn_init(); + xfs_dir_startup(); error = xfs_init_zones(); - if (error < 0) - goto undo_zones; + if (error) + goto out; + + error = xfs_alloc_trace_bufs(); + if (error) + goto out_destroy_zones; + + error = xfs_mru_cache_init(); + if (error) + goto out_free_trace_buffers; + + error = xfs_filestream_init(); + if (error) + goto out_mru_cache_uninit; error = xfs_buf_init(); - if (error < 0) - goto undo_buffers; + if (error) + goto out_filestream_uninit; + + error = xfs_init_procfs(); + if (error) + goto out_buf_terminate; + + error = xfs_sysctl_register(); + if (error) + goto out_cleanup_procfs; - vn_init(); - xfs_init(); - uuid_init(); vfs_initquota(); error = register_filesystem(&xfs_fs_type); if (error) - goto undo_register; + goto out_sysctl_unregister; return 0; -undo_register: + out_sysctl_unregister: + xfs_sysctl_unregister(); + out_cleanup_procfs: + xfs_cleanup_procfs(); + out_buf_terminate: xfs_buf_terminate(); - -undo_buffers: + out_filestream_uninit: + xfs_filestream_uninit(); + out_mru_cache_uninit: + xfs_mru_cache_uninit(); + out_free_trace_buffers: + xfs_free_trace_bufs(); + out_destroy_zones: xfs_destroy_zones(); - -undo_zones: + out: return error; } STATIC void __exit -exit_xfs_fs( void ) +exit_xfs_fs(void) { vfs_exitquota(); unregister_filesystem(&xfs_fs_type); - xfs_cleanup(); + xfs_sysctl_unregister(); + xfs_cleanup_procfs(); xfs_buf_terminate(); + xfs_filestream_uninit(); + xfs_mru_cache_uninit(); + xfs_free_trace_bufs(); xfs_destroy_zones(); ktrace_uninit(); } diff --git a/fs/xfs/linux-2.6/xfs_sysctl.c b/fs/xfs/linux-2.6/xfs_sysctl.c index bb997d75c05c..7dacb5bbde3f 100644 --- a/fs/xfs/linux-2.6/xfs_sysctl.c +++ b/fs/xfs/linux-2.6/xfs_sysctl.c @@ -259,15 +259,17 @@ static ctl_table xfs_root_table[] = { {} }; -void +int xfs_sysctl_register(void) { xfs_table_header = register_sysctl_table(xfs_root_table); + if (!xfs_table_header) + return -ENOMEM; + return 0; } void xfs_sysctl_unregister(void) { - if (xfs_table_header) - unregister_sysctl_table(xfs_table_header); + unregister_sysctl_table(xfs_table_header); } diff --git a/fs/xfs/linux-2.6/xfs_sysctl.h b/fs/xfs/linux-2.6/xfs_sysctl.h index 98b97e399d6f..4aadb8056c37 100644 --- a/fs/xfs/linux-2.6/xfs_sysctl.h +++ b/fs/xfs/linux-2.6/xfs_sysctl.h @@ -93,10 +93,10 @@ enum { extern xfs_param_t xfs_params; #ifdef CONFIG_SYSCTL -extern void xfs_sysctl_register(void); +extern int xfs_sysctl_register(void); extern void xfs_sysctl_unregister(void); #else -# define xfs_sysctl_register() do { } while (0) +# define xfs_sysctl_register() (0) # define xfs_sysctl_unregister() do { } while (0) #endif /* CONFIG_SYSCTL */ diff --git a/fs/xfs/support/uuid.c b/fs/xfs/support/uuid.c index 493a6ecf8590..5830c040ea7e 100644 --- a/fs/xfs/support/uuid.c +++ b/fs/xfs/support/uuid.c @@ -17,7 +17,7 @@ */ #include -static mutex_t uuid_monitor; +static DEFINE_MUTEX(uuid_monitor); static int uuid_table_size; static uuid_t *uuid_table; @@ -132,9 +132,3 @@ uuid_table_remove(uuid_t *uuid) ASSERT(i < uuid_table_size); mutex_unlock(&uuid_monitor); } - -void __init -uuid_init(void) -{ - mutex_init(&uuid_monitor); -} diff --git a/fs/xfs/support/uuid.h b/fs/xfs/support/uuid.h index b6f5922199ba..cff5b607d445 100644 --- a/fs/xfs/support/uuid.h +++ b/fs/xfs/support/uuid.h @@ -22,7 +22,6 @@ typedef struct { unsigned char __u_bits[16]; } uuid_t; -extern void uuid_init(void); extern void uuid_create_nil(uuid_t *uuid); extern int uuid_is_nil(uuid_t *uuid); extern int uuid_equal(uuid_t *uuid1, uuid_t *uuid2); diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index edc0aef4e51e..9e561a9cefca 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -2240,7 +2240,7 @@ xfs_da_state_free(xfs_da_state_t *state) #ifdef XFS_DABUF_DEBUG xfs_dabuf_t *xfs_dabuf_global_list; -spinlock_t xfs_dabuf_global_lock; +static DEFINE_SPINLOCK(xfs_dabuf_global_lock); #endif /* diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c index 7380a00644c8..f66756cfb5e8 100644 --- a/fs/xfs/xfs_error.c +++ b/fs/xfs/xfs_error.c @@ -66,14 +66,6 @@ int xfs_etest[XFS_NUM_INJECT_ERROR]; int64_t xfs_etest_fsid[XFS_NUM_INJECT_ERROR]; char * xfs_etest_fsname[XFS_NUM_INJECT_ERROR]; -void -xfs_error_test_init(void) -{ - memset(xfs_etest, 0, sizeof(xfs_etest)); - memset(xfs_etest_fsid, 0, sizeof(xfs_etest_fsid)); - memset(xfs_etest_fsname, 0, sizeof(xfs_etest_fsname)); -} - int xfs_error_test(int error_tag, int *fsidp, char *expression, int line, char *file, unsigned long randfactor) diff --git a/fs/xfs/xfs_error.h b/fs/xfs/xfs_error.h index 6490d2a9f8e1..d8559d132efa 100644 --- a/fs/xfs/xfs_error.h +++ b/fs/xfs/xfs_error.h @@ -127,7 +127,6 @@ extern void xfs_corruption_error(char *tag, int level, struct xfs_mount *mp, #if (defined(DEBUG) || defined(INDUCE_IO_ERROR)) extern int xfs_error_test(int, int *, char *, int, char *, unsigned long); -extern void xfs_error_test_init(void); #define XFS_NUM_INJECT_ERROR 10 diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c index 3f3785b10804..c38fd14fca29 100644 --- a/fs/xfs/xfs_filestream.c +++ b/fs/xfs/xfs_filestream.c @@ -397,10 +397,12 @@ int xfs_filestream_init(void) { item_zone = kmem_zone_init(sizeof(fstrm_item_t), "fstrm_item"); + if (!item_zone) + return -ENOMEM; #ifdef XFS_FILESTREAMS_TRACE xfs_filestreams_trace_buf = ktrace_alloc(XFS_FSTRM_KTRACE_SIZE, KM_SLEEP); #endif - return item_zone ? 0 : -ENOMEM; + return 0; } /* diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index 2a75f1703b39..5269bd6e3df0 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -546,9 +546,6 @@ extern void xfs_qmops_put(struct xfs_mount *); extern struct xfs_dmops xfs_dmcore_xfs; -extern int xfs_init(void); -extern void xfs_cleanup(void); - #endif /* __KERNEL__ */ #endif /* __XFS_MOUNT_H__ */ diff --git a/fs/xfs/xfs_mru_cache.c b/fs/xfs/xfs_mru_cache.c index 26d14a1e0e14..afee7eb24323 100644 --- a/fs/xfs/xfs_mru_cache.c +++ b/fs/xfs/xfs_mru_cache.c @@ -307,15 +307,18 @@ xfs_mru_cache_init(void) xfs_mru_elem_zone = kmem_zone_init(sizeof(xfs_mru_cache_elem_t), "xfs_mru_cache_elem"); if (!xfs_mru_elem_zone) - return ENOMEM; + goto out; xfs_mru_reap_wq = create_singlethread_workqueue("xfs_mru_cache"); - if (!xfs_mru_reap_wq) { - kmem_zone_destroy(xfs_mru_elem_zone); - return ENOMEM; - } + if (!xfs_mru_reap_wq) + goto out_destroy_mru_elem_zone; return 0; + + out_destroy_mru_elem_zone: + kmem_zone_destroy(xfs_mru_elem_zone); + out: + return -ENOMEM; } void diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c index 8b5a3376c2f7..4a9a43315a86 100644 --- a/fs/xfs/xfs_vfsops.c +++ b/fs/xfs/xfs_vfsops.c @@ -58,137 +58,6 @@ #include "xfs_utils.h" -int __init -xfs_init(void) -{ -#ifdef XFS_DABUF_DEBUG - extern spinlock_t xfs_dabuf_global_lock; - spin_lock_init(&xfs_dabuf_global_lock); -#endif - - /* - * Initialize all of the zone allocators we use. - */ - xfs_log_ticket_zone = kmem_zone_init(sizeof(xlog_ticket_t), - "xfs_log_ticket"); - xfs_bmap_free_item_zone = kmem_zone_init(sizeof(xfs_bmap_free_item_t), - "xfs_bmap_free_item"); - xfs_btree_cur_zone = kmem_zone_init(sizeof(xfs_btree_cur_t), - "xfs_btree_cur"); - xfs_da_state_zone = kmem_zone_init(sizeof(xfs_da_state_t), - "xfs_da_state"); - xfs_dabuf_zone = kmem_zone_init(sizeof(xfs_dabuf_t), "xfs_dabuf"); - xfs_ifork_zone = kmem_zone_init(sizeof(xfs_ifork_t), "xfs_ifork"); - xfs_trans_zone = kmem_zone_init(sizeof(xfs_trans_t), "xfs_trans"); - xfs_acl_zone_init(xfs_acl_zone, "xfs_acl"); - xfs_mru_cache_init(); - xfs_filestream_init(); - - /* - * The size of the zone allocated buf log item is the maximum - * size possible under XFS. This wastes a little bit of memory, - * but it is much faster. - */ - xfs_buf_item_zone = - kmem_zone_init((sizeof(xfs_buf_log_item_t) + - (((XFS_MAX_BLOCKSIZE / XFS_BLI_CHUNK) / - NBWORD) * sizeof(int))), - "xfs_buf_item"); - xfs_efd_zone = - kmem_zone_init((sizeof(xfs_efd_log_item_t) + - ((XFS_EFD_MAX_FAST_EXTENTS - 1) * - sizeof(xfs_extent_t))), - "xfs_efd_item"); - xfs_efi_zone = - kmem_zone_init((sizeof(xfs_efi_log_item_t) + - ((XFS_EFI_MAX_FAST_EXTENTS - 1) * - sizeof(xfs_extent_t))), - "xfs_efi_item"); - - /* - * These zones warrant special memory allocator hints - */ - xfs_inode_zone = - kmem_zone_init_flags(sizeof(xfs_inode_t), "xfs_inode", - KM_ZONE_HWALIGN | KM_ZONE_RECLAIM | - KM_ZONE_SPREAD, NULL); - xfs_ili_zone = - kmem_zone_init_flags(sizeof(xfs_inode_log_item_t), "xfs_ili", - KM_ZONE_SPREAD, NULL); - - /* - * Allocate global trace buffers. - */ -#ifdef XFS_ALLOC_TRACE - xfs_alloc_trace_buf = ktrace_alloc(XFS_ALLOC_TRACE_SIZE, KM_SLEEP); -#endif -#ifdef XFS_BMAP_TRACE - xfs_bmap_trace_buf = ktrace_alloc(XFS_BMAP_TRACE_SIZE, KM_SLEEP); -#endif -#ifdef XFS_BMBT_TRACE - xfs_bmbt_trace_buf = ktrace_alloc(XFS_BMBT_TRACE_SIZE, KM_SLEEP); -#endif -#ifdef XFS_ATTR_TRACE - xfs_attr_trace_buf = ktrace_alloc(XFS_ATTR_TRACE_SIZE, KM_SLEEP); -#endif -#ifdef XFS_DIR2_TRACE - xfs_dir2_trace_buf = ktrace_alloc(XFS_DIR2_GTRACE_SIZE, KM_SLEEP); -#endif - - xfs_dir_startup(); - -#if (defined(DEBUG) || defined(INDUCE_IO_ERROR)) - xfs_error_test_init(); -#endif /* DEBUG || INDUCE_IO_ERROR */ - - xfs_init_procfs(); - xfs_sysctl_register(); - return 0; -} - -void __exit -xfs_cleanup(void) -{ - extern kmem_zone_t *xfs_inode_zone; - extern kmem_zone_t *xfs_efd_zone; - extern kmem_zone_t *xfs_efi_zone; - - xfs_cleanup_procfs(); - xfs_sysctl_unregister(); - xfs_filestream_uninit(); - xfs_mru_cache_uninit(); - xfs_acl_zone_destroy(xfs_acl_zone); - -#ifdef XFS_DIR2_TRACE - ktrace_free(xfs_dir2_trace_buf); -#endif -#ifdef XFS_ATTR_TRACE - ktrace_free(xfs_attr_trace_buf); -#endif -#ifdef XFS_BMBT_TRACE - ktrace_free(xfs_bmbt_trace_buf); -#endif -#ifdef XFS_BMAP_TRACE - ktrace_free(xfs_bmap_trace_buf); -#endif -#ifdef XFS_ALLOC_TRACE - ktrace_free(xfs_alloc_trace_buf); -#endif - - kmem_zone_destroy(xfs_bmap_free_item_zone); - kmem_zone_destroy(xfs_btree_cur_zone); - kmem_zone_destroy(xfs_inode_zone); - kmem_zone_destroy(xfs_trans_zone); - kmem_zone_destroy(xfs_da_state_zone); - kmem_zone_destroy(xfs_dabuf_zone); - kmem_zone_destroy(xfs_buf_item_zone); - kmem_zone_destroy(xfs_efd_zone); - kmem_zone_destroy(xfs_efi_zone); - kmem_zone_destroy(xfs_ifork_zone); - kmem_zone_destroy(xfs_ili_zone); - kmem_zone_destroy(xfs_log_ticket_zone); -} - STATIC void xfs_quiesce_fs( xfs_mount_t *mp) -- cgit v1.2.3 From deeb5912db12e8b7ccf3f4b1afaad60bc29abed9 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Fri, 18 Jul 2008 17:12:18 +1000 Subject: [XFS] Disable queue flag test in barrier check. md raid1 can pass down barriers, but does not set an ordered flag on the queue, so xfs does not even attempt a barrier write, and will never use barriers on these block devices. Remove the flag check and just let the barrier write test determine barrier support. A possible risk here is that if something does not set an ordered flag and also does not properly return an error on a barrier write... but if it's any consolation jbd/ext3/reiserfs never test the flag, and don't even do a test write, they just disable barriers the first time an actual journal barrier write fails. SGI-PV: 983924 SGI-Modid: xfs-linux-melb:xfs-kern:31377a Signed-off-by: Eric Sandeen Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 7c621dfee73d..fcb4931902ac 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -746,14 +746,6 @@ xfs_mountfs_check_barriers(xfs_mount_t *mp) return; } - if (mp->m_ddev_targp->bt_bdev->bd_disk->queue->ordered == - QUEUE_ORDERED_NONE) { - xfs_fs_cmn_err(CE_NOTE, mp, - "Disabling barriers, not supported by the underlying device"); - mp->m_flags &= ~XFS_MOUNT_BARRIER; - return; - } - if (xfs_readonly_buftarg(mp->m_ddev_targp)) { xfs_fs_cmn_err(CE_NOTE, mp, "Disabling barriers, underlying device is readonly"); -- cgit v1.2.3 From 62a877e35d5085c65936ed3194d1bbaf84f419e1 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 18 Jul 2008 17:12:36 +1000 Subject: [XFS] fix mount option parsing in remount Remount currently happily accept any option thrown at it, although the only filesystem specific option it actually handles is barrier/nobarrier. And it actually doesn't handle these correctly either because it only uses the value it parsed when we're doing a ro->rw transition. In addition to that there's also a bad bug in xfs_parseargs which doesn't touch the actual option in the mount point except for a single one, XFS_MOUNT_SMALL_INUMS and thus forced any filesystem that's every remounted in some way to not support 64bit inodes with no way to recover unless unmounted. This patch changes xfs_fs_remount to use it's own linux/parser.h based options parse instead of xfs_parseargs and reject all options except for barrier/nobarrier and to the right thing in general. Eventually I'd like to have a single big option table used for mount aswell but that can wait for a while. SGI-PV: 983964 SGI-Modid: xfs-linux-melb:xfs-kern:31382a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 72 +++++++++++++++++++++++++++++++++----------- 1 file changed, 54 insertions(+), 18 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index fcb4931902ac..b40086680047 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -66,6 +66,7 @@ #include #include #include +#include static struct quotactl_ops xfs_quotactl_operations; static struct super_operations xfs_super_operations; @@ -147,6 +148,23 @@ xfs_args_allocate( #define MNTOPT_XDSM "xdsm" /* DMI enabled (DMAPI / XDSM) */ #define MNTOPT_DMI "dmi" /* DMI enabled (DMAPI / XDSM) */ +/* + * Table driven mount option parser. + * + * Currently only used for remount, but it will be used for mount + * in the future, too. + */ +enum { + Opt_barrier, Opt_nobarrier, Opt_err +}; + +static match_table_t tokens = { + {Opt_barrier, "barrier"}, + {Opt_nobarrier, "nobarrier"}, + {Opt_err, NULL} +}; + + STATIC unsigned long suffix_strtoul(char *s, char **endp, unsigned int base) { @@ -1364,36 +1382,54 @@ xfs_fs_remount( char *options) { struct xfs_mount *mp = XFS_M(sb); - struct xfs_mount_args *args; - int error; + substring_t args[MAX_OPT_ARGS]; + char *p; - args = xfs_args_allocate(sb, 0); - if (!args) - return -ENOMEM; + while ((p = strsep(&options, ",")) != NULL) { + int token; - error = xfs_parseargs(mp, options, args, 1); - if (error) - goto out_free_args; + if (!*p) + continue; - if (!(*flags & MS_RDONLY)) { /* rw/ro -> rw */ - if (mp->m_flags & XFS_MOUNT_RDONLY) - mp->m_flags &= ~XFS_MOUNT_RDONLY; - if (args->flags & XFSMNT_BARRIER) { + token = match_token(p, tokens, args); + switch (token) { + case Opt_barrier: mp->m_flags |= XFS_MOUNT_BARRIER; - xfs_mountfs_check_barriers(mp); - } else { + + /* + * Test if barriers are actually working if we can, + * else delay this check until the filesystem is + * marked writeable. + */ + if (!(mp->m_flags & XFS_MOUNT_RDONLY)) + xfs_mountfs_check_barriers(mp); + break; + case Opt_nobarrier: mp->m_flags &= ~XFS_MOUNT_BARRIER; + break; + default: + printk(KERN_INFO + "XFS: mount option \"%s\" not supported for remount\n", p); + return -EINVAL; } - } else if (!(mp->m_flags & XFS_MOUNT_RDONLY)) { /* rw -> ro */ + } + + /* rw/ro -> rw */ + if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(*flags & MS_RDONLY)) { + mp->m_flags &= ~XFS_MOUNT_RDONLY; + if (mp->m_flags & XFS_MOUNT_BARRIER) + xfs_mountfs_check_barriers(mp); + } + + /* rw -> ro */ + if (!(mp->m_flags & XFS_MOUNT_RDONLY) && (*flags & MS_RDONLY)) { xfs_filestream_flush(mp); xfs_sync(mp, SYNC_DATA_QUIESCE); xfs_attr_quiesce(mp); mp->m_flags |= XFS_MOUNT_RDONLY; } - out_free_args: - kfree(args); - return -error; + return 0; } /* -- cgit v1.2.3 From 26cc0021805e66daa6342174fb5a8c1c862f7c8e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 18 Jul 2008 17:12:43 +1000 Subject: [XFS] s/XFS_PURGE_INODE/IRELE/g s/VN_HOLD(XFS_ITOV())/IHOLD()/ SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31405a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/quota/xfs_qm.c | 10 +++++----- fs/xfs/quota/xfs_qm_syscalls.c | 4 ++-- fs/xfs/quota/xfs_quota_priv.h | 3 --- 3 files changed, 7 insertions(+), 10 deletions(-) diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c index 26370a3128f5..021934a3d456 100644 --- a/fs/xfs/quota/xfs_qm.c +++ b/fs/xfs/quota/xfs_qm.c @@ -445,11 +445,11 @@ xfs_qm_unmount_quotas( } } if (uqp) { - XFS_PURGE_INODE(uqp); + IRELE(uqp); mp->m_quotainfo->qi_uquotaip = NULL; } if (gqp) { - XFS_PURGE_INODE(gqp); + IRELE(gqp); mp->m_quotainfo->qi_gquotaip = NULL; } out: @@ -1240,11 +1240,11 @@ xfs_qm_destroy_quotainfo( xfs_qm_list_destroy(&qi->qi_dqlist); if (qi->qi_uquotaip) { - XFS_PURGE_INODE(qi->qi_uquotaip); + IRELE(qi->qi_uquotaip); qi->qi_uquotaip = NULL; /* paranoia */ } if (qi->qi_gquotaip) { - XFS_PURGE_INODE(qi->qi_gquotaip); + IRELE(qi->qi_gquotaip); qi->qi_gquotaip = NULL; } mutex_destroy(&qi->qi_quotaofflock); @@ -1394,7 +1394,7 @@ xfs_qm_qino_alloc( * locked exclusively and joined to the transaction already. */ ASSERT(xfs_isilocked(*ip, XFS_ILOCK_EXCL)); - VN_HOLD(XFS_ITOV((*ip))); + IHOLD(*ip); /* * Make the changes in the superblock, and log those too. diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c index 413671523cb5..adfb8723f65a 100644 --- a/fs/xfs/quota/xfs_qm_syscalls.c +++ b/fs/xfs/quota/xfs_qm_syscalls.c @@ -362,11 +362,11 @@ xfs_qm_scall_quotaoff( * if we don't need them anymore. */ if ((dqtype & XFS_QMOPT_UQUOTA) && XFS_QI_UQIP(mp)) { - XFS_PURGE_INODE(XFS_QI_UQIP(mp)); + IRELE(XFS_QI_UQIP(mp)); XFS_QI_UQIP(mp) = NULL; } if ((dqtype & (XFS_QMOPT_GQUOTA|XFS_QMOPT_PQUOTA)) && XFS_QI_GQIP(mp)) { - XFS_PURGE_INODE(XFS_QI_GQIP(mp)); + IRELE(XFS_QI_GQIP(mp)); XFS_QI_GQIP(mp) = NULL; } out_error: diff --git a/fs/xfs/quota/xfs_quota_priv.h b/fs/xfs/quota/xfs_quota_priv.h index 5e4a40b1c565..c4fcea600bc2 100644 --- a/fs/xfs/quota/xfs_quota_priv.h +++ b/fs/xfs/quota/xfs_quota_priv.h @@ -158,9 +158,6 @@ for ((dqp) = (qlist)->qh_next; (dqp) != (xfs_dquot_t *)(qlist); \ #define XFS_IS_SUSER_DQUOT(dqp) \ (!((dqp)->q_core.d_id)) -#define XFS_PURGE_INODE(ip) \ - IRELE(ip); - #define DQFLAGTO_TYPESTR(d) (((d)->dq_flags & XFS_DQ_USER) ? "USR" : \ (((d)->dq_flags & XFS_DQ_GROUP) ? "GRP" : \ (((d)->dq_flags & XFS_DQ_PROJ) ? "PRJ":"???"))) -- cgit v1.2.3 From 766b0925c07cd363c17ff54ebf59b6d34d8042d5 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 18 Jul 2008 17:12:50 +1000 Subject: [XFS] fix compilation without CONFIG_PROC_FS SGI-PV: 984019 SGI-Modid: xfs-linux-melb:xfs-kern:31408a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_stats.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_stats.h b/fs/xfs/linux-2.6/xfs_stats.h index 3fa753d7b700..e83820febc9f 100644 --- a/fs/xfs/linux-2.6/xfs_stats.h +++ b/fs/xfs/linux-2.6/xfs_stats.h @@ -146,11 +146,12 @@ extern void xfs_cleanup_procfs(void); static inline int xfs_init_procfs(void) { - return 0 -}; + return 0; +} + static inline void xfs_cleanup_procfs(void) { -}; +} #endif /* !CONFIG_PROC_FS */ -- cgit v1.2.3 From 6a617dd22bdbf5a4c9828db98c1a8b076c9e95c8 Mon Sep 17 00:00:00 2001 From: Tim Shimmin Date: Fri, 18 Jul 2008 17:13:04 +1000 Subject: [XFS] A bug was found in xfs_bmap_add_extent_unwritten_real(). In a particular case, the delta param which is supposed to describe the region where extents have changed was not updated appropriately. SGI-PV: 984030 SGI-Modid: xfs-linux-melb:xfs-kern:31663a Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy Signed-off-by: Olaf Weber --- fs/xfs/xfs_bmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index cf4dee01983a..3c4beb3a4326 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -1740,9 +1740,9 @@ xfs_bmap_add_extent_unwritten_real( r[1].br_state))) goto done; /* new left extent - oldext */ - PREV.br_blockcount = - new->br_startoff - PREV.br_startoff; cur->bc_rec.b = PREV; + cur->bc_rec.b.br_blockcount = + new->br_startoff - PREV.br_startoff; if ((error = xfs_bmbt_insert(cur, &i))) goto done; XFS_WANT_CORRUPTED_GOTO(i == 1, done); -- cgit v1.2.3 From c032bfcf468013643e05c8274824af10dd7cbb61 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 18 Jul 2008 17:13:12 +1000 Subject: [XFS] fix use after free with external logs or real-time devices SGI-PV: 983806 SGI-Modid: xfs-linux-melb:xfs-kern:31666a Signed-off-by: Lachlan McIlroy Signed-off-by: Christoph Hellwig --- fs/xfs/linux-2.6/xfs_super.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index b40086680047..30ae96397e31 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -792,12 +792,14 @@ xfs_close_devices( struct xfs_mount *mp) { if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) { + struct block_device *logdev = mp->m_logdev_targp->bt_bdev; xfs_free_buftarg(mp->m_logdev_targp); - xfs_blkdev_put(mp->m_logdev_targp->bt_bdev); + xfs_blkdev_put(logdev); } if (mp->m_rtdev_targp) { + struct block_device *rtdev = mp->m_rtdev_targp->bt_bdev; xfs_free_buftarg(mp->m_rtdev_targp); - xfs_blkdev_put(mp->m_rtdev_targp->bt_bdev); + xfs_blkdev_put(rtdev); } xfs_free_buftarg(mp->m_ddev_targp); } -- cgit v1.2.3 From 25fe55e814a2964c7e16d16a5d08cae6e9313a3a Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 18 Jul 2008 17:13:20 +1000 Subject: [XFS] xfs_setattr currently doesn't just handle the attributes set through ->setattr but also addition XFS-specific attributes: project id, inode flags and extent size hint. Having these in a single function makes it more complicated and forces to have us a bhv_vattr intermediate structure eating up stackspace. This patch adds a new xfs_ioctl_setattr helper for the XFS ioctls that set these attributes and remove the code to set them through xfs_setattr. SGI-PV: 984564 SGI-Modid: xfs-linux-melb:xfs-kern:31677a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_ioctl.c | 339 ++++++++++++++++++++++++++++++++++++++----- fs/xfs/linux-2.6/xfs_vnode.h | 15 -- fs/xfs/xfs_vnodeops.c | 169 +-------------------- 3 files changed, 311 insertions(+), 212 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index 8eddaff36843..d2bbb0532ef6 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -48,6 +48,8 @@ #include "xfs_dfrag.h" #include "xfs_fsops.h" #include "xfs_vnodeops.h" +#include "xfs_quota.h" +#include "xfs_inode_item.h" #include #include @@ -879,6 +881,297 @@ xfs_ioc_fsgetxattr( return 0; } +STATIC void +xfs_set_diflags( + struct xfs_inode *ip, + unsigned int xflags) +{ + unsigned int di_flags; + + /* can't set PREALLOC this way, just preserve it */ + di_flags = (ip->i_d.di_flags & XFS_DIFLAG_PREALLOC); + if (xflags & XFS_XFLAG_IMMUTABLE) + di_flags |= XFS_DIFLAG_IMMUTABLE; + if (xflags & XFS_XFLAG_APPEND) + di_flags |= XFS_DIFLAG_APPEND; + if (xflags & XFS_XFLAG_SYNC) + di_flags |= XFS_DIFLAG_SYNC; + if (xflags & XFS_XFLAG_NOATIME) + di_flags |= XFS_DIFLAG_NOATIME; + if (xflags & XFS_XFLAG_NODUMP) + di_flags |= XFS_DIFLAG_NODUMP; + if (xflags & XFS_XFLAG_PROJINHERIT) + di_flags |= XFS_DIFLAG_PROJINHERIT; + if (xflags & XFS_XFLAG_NODEFRAG) + di_flags |= XFS_DIFLAG_NODEFRAG; + if (xflags & XFS_XFLAG_FILESTREAM) + di_flags |= XFS_DIFLAG_FILESTREAM; + if ((ip->i_d.di_mode & S_IFMT) == S_IFDIR) { + if (xflags & XFS_XFLAG_RTINHERIT) + di_flags |= XFS_DIFLAG_RTINHERIT; + if (xflags & XFS_XFLAG_NOSYMLINKS) + di_flags |= XFS_DIFLAG_NOSYMLINKS; + if (xflags & XFS_XFLAG_EXTSZINHERIT) + di_flags |= XFS_DIFLAG_EXTSZINHERIT; + } else if ((ip->i_d.di_mode & S_IFMT) == S_IFREG) { + if (xflags & XFS_XFLAG_REALTIME) + di_flags |= XFS_DIFLAG_REALTIME; + if (xflags & XFS_XFLAG_EXTSIZE) + di_flags |= XFS_DIFLAG_EXTSIZE; + } + + ip->i_d.di_flags = di_flags; +} + + +#define FSX_PROJID 1 +#define FSX_EXTSIZE 2 +#define FSX_XFLAGS 4 +#define FSX_NONBLOCK 8 + +STATIC int +xfs_ioctl_setattr( + xfs_inode_t *ip, + struct fsxattr *fa, + int mask) +{ + struct xfs_mount *mp = ip->i_mount; + struct xfs_trans *tp; + unsigned int lock_flags = 0; + struct xfs_dquot *udqp = NULL, *gdqp = NULL; + struct xfs_dquot *olddquot = NULL; + int code; + + xfs_itrace_entry(ip); + + if (mp->m_flags & XFS_MOUNT_RDONLY) + return XFS_ERROR(EROFS); + if (XFS_FORCED_SHUTDOWN(mp)) + return XFS_ERROR(EIO); + + /* + * If disk quotas is on, we make sure that the dquots do exist on disk, + * before we start any other transactions. Trying to do this later + * is messy. We don't care to take a readlock to look at the ids + * in inode here, because we can't hold it across the trans_reserve. + * If the IDs do change before we take the ilock, we're covered + * because the i_*dquot fields will get updated anyway. + */ + if (XFS_IS_QUOTA_ON(mp) && (mask & FSX_PROJID)) { + code = XFS_QM_DQVOPALLOC(mp, ip, ip->i_d.di_uid, + ip->i_d.di_gid, fa->fsx_projid, + XFS_QMOPT_PQUOTA, &udqp, &gdqp); + if (code) + return code; + } + + /* + * For the other attributes, we acquire the inode lock and + * first do an error checking pass. + */ + tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE); + code = xfs_trans_reserve(tp, 0, XFS_ICHANGE_LOG_RES(mp), 0, 0, 0); + if (code) + goto error_return; + + lock_flags = XFS_ILOCK_EXCL; + xfs_ilock(ip, lock_flags); + + /* + * CAP_FOWNER overrides the following restrictions: + * + * The user ID of the calling process must be equal + * to the file owner ID, except in cases where the + * CAP_FSETID capability is applicable. + */ + if (current->fsuid != ip->i_d.di_uid && !capable(CAP_FOWNER)) { + code = XFS_ERROR(EPERM); + goto error_return; + } + + /* + * Do a quota reservation only if projid is actually going to change. + */ + if (mask & FSX_PROJID) { + if (XFS_IS_PQUOTA_ON(mp) && + ip->i_d.di_projid != fa->fsx_projid) { + ASSERT(tp); + code = XFS_QM_DQVOPCHOWNRESV(mp, tp, ip, udqp, gdqp, + capable(CAP_FOWNER) ? + XFS_QMOPT_FORCE_RES : 0); + if (code) /* out of quota */ + goto error_return; + } + } + + if (mask & FSX_EXTSIZE) { + /* + * Can't change extent size if any extents are allocated. + */ + if (ip->i_d.di_nextents && + ((ip->i_d.di_extsize << mp->m_sb.sb_blocklog) != + fa->fsx_extsize)) { + code = XFS_ERROR(EINVAL); /* EFBIG? */ + goto error_return; + } + + /* + * Extent size must be a multiple of the appropriate block + * size, if set at all. + */ + if (fa->fsx_extsize != 0) { + xfs_extlen_t size; + + if (XFS_IS_REALTIME_INODE(ip) || + ((mask & FSX_XFLAGS) && + (fa->fsx_xflags & XFS_XFLAG_REALTIME))) { + size = mp->m_sb.sb_rextsize << + mp->m_sb.sb_blocklog; + } else { + size = mp->m_sb.sb_blocksize; + } + + if (fa->fsx_extsize % size) { + code = XFS_ERROR(EINVAL); + goto error_return; + } + } + } + + + if (mask & FSX_XFLAGS) { + /* + * Can't change realtime flag if any extents are allocated. + */ + if ((ip->i_d.di_nextents || ip->i_delayed_blks) && + (XFS_IS_REALTIME_INODE(ip)) != + (fa->fsx_xflags & XFS_XFLAG_REALTIME)) { + code = XFS_ERROR(EINVAL); /* EFBIG? */ + goto error_return; + } + + /* + * If realtime flag is set then must have realtime data. + */ + if ((fa->fsx_xflags & XFS_XFLAG_REALTIME)) { + if ((mp->m_sb.sb_rblocks == 0) || + (mp->m_sb.sb_rextsize == 0) || + (ip->i_d.di_extsize % mp->m_sb.sb_rextsize)) { + code = XFS_ERROR(EINVAL); + goto error_return; + } + } + + /* + * Can't modify an immutable/append-only file unless + * we have appropriate permission. + */ + if ((ip->i_d.di_flags & + (XFS_DIFLAG_IMMUTABLE|XFS_DIFLAG_APPEND) || + (fa->fsx_xflags & + (XFS_XFLAG_IMMUTABLE | XFS_XFLAG_APPEND))) && + !capable(CAP_LINUX_IMMUTABLE)) { + code = XFS_ERROR(EPERM); + goto error_return; + } + } + + xfs_trans_ijoin(tp, ip, lock_flags); + xfs_trans_ihold(tp, ip); + + /* + * Change file ownership. Must be the owner or privileged. + * If the system was configured with the "restricted_chown" + * option, the owner is not permitted to give away the file, + * and can change the group id only to a group of which he + * or she is a member. + */ + if (mask & FSX_PROJID) { + /* + * CAP_FSETID overrides the following restrictions: + * + * The set-user-ID and set-group-ID bits of a file will be + * cleared upon successful return from chown() + */ + if ((ip->i_d.di_mode & (S_ISUID|S_ISGID)) && + !capable(CAP_FSETID)) + ip->i_d.di_mode &= ~(S_ISUID|S_ISGID); + + /* + * Change the ownerships and register quota modifications + * in the transaction. + */ + if (ip->i_d.di_projid != fa->fsx_projid) { + if (XFS_IS_PQUOTA_ON(mp)) { + olddquot = XFS_QM_DQVOPCHOWN(mp, tp, ip, + &ip->i_gdquot, gdqp); + } + ip->i_d.di_projid = fa->fsx_projid; + + /* + * We may have to rev the inode as well as + * the superblock version number since projids didn't + * exist before DINODE_VERSION_2 and SB_VERSION_NLINK. + */ + if (ip->i_d.di_version == XFS_DINODE_VERSION_1) + xfs_bump_ino_vers2(tp, ip); + } + + } + + if (mask & FSX_EXTSIZE) + ip->i_d.di_extsize = fa->fsx_extsize >> mp->m_sb.sb_blocklog; + if (mask & FSX_XFLAGS) + xfs_set_diflags(ip, fa->fsx_xflags); + + xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); + xfs_ichgtime(ip, XFS_ICHGTIME_CHG); + + XFS_STATS_INC(xs_ig_attrchg); + + /* + * If this is a synchronous mount, make sure that the + * transaction goes to disk before returning to the user. + * This is slightly sub-optimal in that truncates require + * two sync transactions instead of one for wsync filesystems. + * One for the truncate and one for the timestamps since we + * don't want to change the timestamps unless we're sure the + * truncate worked. Truncates are less than 1% of the laddis + * mix so this probably isn't worth the trouble to optimize. + */ + if (mp->m_flags & XFS_MOUNT_WSYNC) + xfs_trans_set_sync(tp); + code = xfs_trans_commit(tp, 0); + xfs_iunlock(ip, lock_flags); + + /* + * Release any dquot(s) the inode had kept before chown. + */ + XFS_QM_DQRELE(mp, olddquot); + XFS_QM_DQRELE(mp, udqp); + XFS_QM_DQRELE(mp, gdqp); + + if (code) + return code; + + if (DM_EVENT_ENABLED(ip, DM_EVENT_ATTRIBUTE)) { + XFS_SEND_NAMESP(mp, DM_EVENT_ATTRIBUTE, ip, DM_RIGHT_NULL, + NULL, DM_RIGHT_NULL, NULL, NULL, 0, 0, + (mask & FSX_NONBLOCK) ? DM_FLAGS_NDELAY : 0); + } + + vn_revalidate(XFS_ITOV(ip)); /* update flags */ + return 0; + + error_return: + XFS_QM_DQRELE(mp, udqp); + XFS_QM_DQRELE(mp, gdqp); + xfs_trans_cancel(tp, 0); + if (lock_flags) + xfs_iunlock(ip, lock_flags); + return code; +} + STATIC int xfs_ioc_fssetxattr( xfs_inode_t *ip, @@ -886,31 +1179,16 @@ xfs_ioc_fssetxattr( void __user *arg) { struct fsxattr fa; - struct bhv_vattr *vattr; - int error; - int attr_flags; + unsigned int mask; if (copy_from_user(&fa, arg, sizeof(fa))) return -EFAULT; - vattr = kmalloc(sizeof(*vattr), GFP_KERNEL); - if (unlikely(!vattr)) - return -ENOMEM; - - attr_flags = 0; + mask = FSX_XFLAGS | FSX_EXTSIZE | FSX_PROJID; if (filp->f_flags & (O_NDELAY|O_NONBLOCK)) - attr_flags |= ATTR_NONBLOCK; + mask |= FSX_NONBLOCK; - vattr->va_mask = XFS_AT_XFLAGS | XFS_AT_EXTSIZE | XFS_AT_PROJID; - vattr->va_xflags = fa.fsx_xflags; - vattr->va_extsize = fa.fsx_extsize; - vattr->va_projid = fa.fsx_projid; - - error = -xfs_setattr(ip, vattr, attr_flags, NULL); - if (!error) - vn_revalidate(XFS_ITOV(ip)); /* update flags */ - kfree(vattr); - return 0; + return -xfs_ioctl_setattr(ip, &fa, mask); } STATIC int @@ -932,10 +1210,9 @@ xfs_ioc_setxflags( struct file *filp, void __user *arg) { - struct bhv_vattr *vattr; + struct fsxattr fa; unsigned int flags; - int attr_flags; - int error; + unsigned int mask; if (copy_from_user(&flags, arg, sizeof(flags))) return -EFAULT; @@ -945,22 +1222,12 @@ xfs_ioc_setxflags( FS_SYNC_FL)) return -EOPNOTSUPP; - vattr = kmalloc(sizeof(*vattr), GFP_KERNEL); - if (unlikely(!vattr)) - return -ENOMEM; - - attr_flags = 0; + mask = FSX_XFLAGS; if (filp->f_flags & (O_NDELAY|O_NONBLOCK)) - attr_flags |= ATTR_NONBLOCK; + mask |= FSX_NONBLOCK; + fa.fsx_xflags = xfs_merge_ioc_xflags(flags, xfs_ip2xflags(ip)); - vattr->va_mask = XFS_AT_XFLAGS; - vattr->va_xflags = xfs_merge_ioc_xflags(flags, xfs_ip2xflags(ip)); - - error = -xfs_setattr(ip, vattr, attr_flags, NULL); - if (likely(!error)) - vn_revalidate(XFS_ITOV(ip)); /* update flags */ - kfree(vattr); - return error; + return -xfs_ioctl_setattr(ip, &fa, mask); } STATIC int diff --git a/fs/xfs/linux-2.6/xfs_vnode.h b/fs/xfs/linux-2.6/xfs_vnode.h index 25eb2a9e8d9b..7797c9cdb591 100644 --- a/fs/xfs/linux-2.6/xfs_vnode.h +++ b/fs/xfs/linux-2.6/xfs_vnode.h @@ -117,26 +117,11 @@ typedef struct bhv_vattr { #define XFS_AT_ACL 0x00080000 #define XFS_AT_CAP 0x00100000 #define XFS_AT_INF 0x00200000 -#define XFS_AT_XFLAGS 0x00400000 -#define XFS_AT_EXTSIZE 0x00800000 #define XFS_AT_NEXTENTS 0x01000000 #define XFS_AT_ANEXTENTS 0x02000000 -#define XFS_AT_PROJID 0x04000000 #define XFS_AT_SIZE_NOPERM 0x08000000 #define XFS_AT_GENCOUNT 0x10000000 -#define XFS_AT_ALL (XFS_AT_TYPE|XFS_AT_MODE|XFS_AT_UID|XFS_AT_GID|\ - XFS_AT_FSID|XFS_AT_NODEID|XFS_AT_NLINK|XFS_AT_SIZE|\ - XFS_AT_ATIME|XFS_AT_MTIME|XFS_AT_CTIME|XFS_AT_RDEV|\ - XFS_AT_BLKSIZE|XFS_AT_NBLOCKS|XFS_AT_VCODE|XFS_AT_MAC|\ - XFS_AT_ACL|XFS_AT_CAP|XFS_AT_INF|XFS_AT_XFLAGS|XFS_AT_EXTSIZE|\ - XFS_AT_NEXTENTS|XFS_AT_ANEXTENTS|XFS_AT_PROJID|XFS_AT_GENCOUNT) - -#define XFS_AT_STAT (XFS_AT_TYPE|XFS_AT_MODE|XFS_AT_UID|XFS_AT_GID|\ - XFS_AT_FSID|XFS_AT_NODEID|XFS_AT_NLINK|XFS_AT_SIZE|\ - XFS_AT_ATIME|XFS_AT_MTIME|XFS_AT_CTIME|XFS_AT_RDEV|\ - XFS_AT_BLKSIZE|XFS_AT_NBLOCKS|XFS_AT_PROJID) - #define XFS_AT_TIMES (XFS_AT_ATIME|XFS_AT_MTIME|XFS_AT_CTIME) #define XFS_AT_UPDTIMES (XFS_AT_UPDATIME|XFS_AT_UPDMTIME|XFS_AT_UPDCTIME) diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 8297a8c5af90..ed399523b782 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -94,7 +94,6 @@ xfs_setattr( uid_t uid=0, iuid=0; gid_t gid=0, igid=0; int timeflags = 0; - xfs_prid_t projid=0, iprojid=0; struct xfs_dquot *udqp, *gdqp, *olddquot1, *olddquot2; int file_owner; int need_iolock = 1; @@ -139,8 +138,7 @@ xfs_setattr( * If the IDs do change before we take the ilock, we're covered * because the i_*dquot fields will get updated anyway. */ - if (XFS_IS_QUOTA_ON(mp) && - (mask & (XFS_AT_UID|XFS_AT_GID|XFS_AT_PROJID))) { + if (XFS_IS_QUOTA_ON(mp) && (mask & (XFS_AT_UID|XFS_AT_GID))) { uint qflags = 0; if ((mask & XFS_AT_UID) && XFS_IS_UQUOTA_ON(mp)) { @@ -155,12 +153,7 @@ xfs_setattr( } else { gid = ip->i_d.di_gid; } - if ((mask & XFS_AT_PROJID) && XFS_IS_PQUOTA_ON(mp)) { - projid = vap->va_projid; - qflags |= XFS_QMOPT_PQUOTA; - } else { - projid = ip->i_d.di_projid; - } + /* * We take a reference when we initialize udqp and gdqp, * so it is important that we never blindly double trip on @@ -168,8 +161,8 @@ xfs_setattr( */ ASSERT(udqp == NULL); ASSERT(gdqp == NULL); - code = XFS_QM_DQVOPALLOC(mp, ip, uid, gid, projid, qflags, - &udqp, &gdqp); + code = XFS_QM_DQVOPALLOC(mp, ip, uid, gid, ip->i_d.di_projid, + qflags, &udqp, &gdqp); if (code) return code; } @@ -219,9 +212,7 @@ xfs_setattr( * Only the owner or users with CAP_FOWNER * capability may do these things. */ - if (mask & - (XFS_AT_MODE|XFS_AT_XFLAGS|XFS_AT_EXTSIZE|XFS_AT_UID| - XFS_AT_GID|XFS_AT_PROJID)) { + if (mask & (XFS_AT_MODE|XFS_AT_UID|XFS_AT_GID)) { /* * CAP_FOWNER overrides the following restrictions: * @@ -270,7 +261,7 @@ xfs_setattr( * and can change the group id only to a group of which he * or she is a member. */ - if (mask & (XFS_AT_UID|XFS_AT_GID|XFS_AT_PROJID)) { + if (mask & (XFS_AT_UID|XFS_AT_GID)) { /* * These IDs could have changed since we last looked at them. * But, we're assured that if the ownership did change @@ -278,12 +269,9 @@ xfs_setattr( * would have changed also. */ iuid = ip->i_d.di_uid; - iprojid = ip->i_d.di_projid; igid = ip->i_d.di_gid; gid = (mask & XFS_AT_GID) ? vap->va_gid : igid; uid = (mask & XFS_AT_UID) ? vap->va_uid : iuid; - projid = (mask & XFS_AT_PROJID) ? (xfs_prid_t)vap->va_projid : - iprojid; /* * CAP_CHOWN overrides the following restrictions: @@ -303,11 +291,10 @@ xfs_setattr( goto error_return; } /* - * Do a quota reservation only if uid/projid/gid is actually + * Do a quota reservation only if uid/gid is actually * going to change. */ if ((XFS_IS_UQUOTA_ON(mp) && iuid != uid) || - (XFS_IS_PQUOTA_ON(mp) && iprojid != projid) || (XFS_IS_GQUOTA_ON(mp) && igid != gid)) { ASSERT(tp); code = XFS_QM_DQVOPCHOWNRESV(mp, tp, ip, udqp, gdqp, @@ -360,78 +347,6 @@ xfs_setattr( } } - /* - * Change extent size or realtime flag. - */ - if (mask & (XFS_AT_EXTSIZE|XFS_AT_XFLAGS)) { - /* - * Can't change extent size if any extents are allocated. - */ - if (ip->i_d.di_nextents && (mask & XFS_AT_EXTSIZE) && - ((ip->i_d.di_extsize << mp->m_sb.sb_blocklog) != - vap->va_extsize) ) { - code = XFS_ERROR(EINVAL); /* EFBIG? */ - goto error_return; - } - - /* - * Can't change realtime flag if any extents are allocated. - */ - if ((ip->i_d.di_nextents || ip->i_delayed_blks) && - (mask & XFS_AT_XFLAGS) && - (XFS_IS_REALTIME_INODE(ip)) != - (vap->va_xflags & XFS_XFLAG_REALTIME)) { - code = XFS_ERROR(EINVAL); /* EFBIG? */ - goto error_return; - } - /* - * Extent size must be a multiple of the appropriate block - * size, if set at all. - */ - if ((mask & XFS_AT_EXTSIZE) && vap->va_extsize != 0) { - xfs_extlen_t size; - - if (XFS_IS_REALTIME_INODE(ip) || - ((mask & XFS_AT_XFLAGS) && - (vap->va_xflags & XFS_XFLAG_REALTIME))) { - size = mp->m_sb.sb_rextsize << - mp->m_sb.sb_blocklog; - } else { - size = mp->m_sb.sb_blocksize; - } - if (vap->va_extsize % size) { - code = XFS_ERROR(EINVAL); - goto error_return; - } - } - /* - * If realtime flag is set then must have realtime data. - */ - if ((mask & XFS_AT_XFLAGS) && - (vap->va_xflags & XFS_XFLAG_REALTIME)) { - if ((mp->m_sb.sb_rblocks == 0) || - (mp->m_sb.sb_rextsize == 0) || - (ip->i_d.di_extsize % mp->m_sb.sb_rextsize)) { - code = XFS_ERROR(EINVAL); - goto error_return; - } - } - - /* - * Can't modify an immutable/append-only file unless - * we have appropriate permission. - */ - if ((mask & XFS_AT_XFLAGS) && - (ip->i_d.di_flags & - (XFS_DIFLAG_IMMUTABLE|XFS_DIFLAG_APPEND) || - (vap->va_xflags & - (XFS_XFLAG_IMMUTABLE | XFS_XFLAG_APPEND))) && - !capable(CAP_LINUX_IMMUTABLE)) { - code = XFS_ERROR(EPERM); - goto error_return; - } - } - /* * Now we can make the changes. Before we join the inode * to the transaction, if XFS_AT_SIZE is set then take care of @@ -568,7 +483,7 @@ xfs_setattr( * and can change the group id only to a group of which he * or she is a member. */ - if (mask & (XFS_AT_UID|XFS_AT_GID|XFS_AT_PROJID)) { + if (mask & (XFS_AT_UID|XFS_AT_GID)) { /* * CAP_FSETID overrides the following restrictions: * @@ -603,23 +518,6 @@ xfs_setattr( } ip->i_d.di_gid = gid; } - if (iprojid != projid) { - if (XFS_IS_PQUOTA_ON(mp)) { - ASSERT(!XFS_IS_GQUOTA_ON(mp)); - ASSERT(mask & XFS_AT_PROJID); - ASSERT(gdqp); - olddquot2 = XFS_QM_DQVOPCHOWN(mp, tp, ip, - &ip->i_gdquot, gdqp); - } - ip->i_d.di_projid = projid; - /* - * We may have to rev the inode as well as - * the superblock version number since projids didn't - * exist before DINODE_VERSION_2 and SB_VERSION_NLINK. - */ - if (ip->i_d.di_version == XFS_DINODE_VERSION_1) - xfs_bump_ino_vers2(tp, ip); - } xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE); timeflags |= XFS_ICHGTIME_CHG; @@ -646,57 +544,6 @@ xfs_setattr( xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE); } - /* - * Change XFS-added attributes. - */ - if (mask & (XFS_AT_EXTSIZE|XFS_AT_XFLAGS)) { - if (mask & XFS_AT_EXTSIZE) { - /* - * Converting bytes to fs blocks. - */ - ip->i_d.di_extsize = vap->va_extsize >> - mp->m_sb.sb_blocklog; - } - if (mask & XFS_AT_XFLAGS) { - uint di_flags; - - /* can't set PREALLOC this way, just preserve it */ - di_flags = (ip->i_d.di_flags & XFS_DIFLAG_PREALLOC); - if (vap->va_xflags & XFS_XFLAG_IMMUTABLE) - di_flags |= XFS_DIFLAG_IMMUTABLE; - if (vap->va_xflags & XFS_XFLAG_APPEND) - di_flags |= XFS_DIFLAG_APPEND; - if (vap->va_xflags & XFS_XFLAG_SYNC) - di_flags |= XFS_DIFLAG_SYNC; - if (vap->va_xflags & XFS_XFLAG_NOATIME) - di_flags |= XFS_DIFLAG_NOATIME; - if (vap->va_xflags & XFS_XFLAG_NODUMP) - di_flags |= XFS_DIFLAG_NODUMP; - if (vap->va_xflags & XFS_XFLAG_PROJINHERIT) - di_flags |= XFS_DIFLAG_PROJINHERIT; - if (vap->va_xflags & XFS_XFLAG_NODEFRAG) - di_flags |= XFS_DIFLAG_NODEFRAG; - if (vap->va_xflags & XFS_XFLAG_FILESTREAM) - di_flags |= XFS_DIFLAG_FILESTREAM; - if ((ip->i_d.di_mode & S_IFMT) == S_IFDIR) { - if (vap->va_xflags & XFS_XFLAG_RTINHERIT) - di_flags |= XFS_DIFLAG_RTINHERIT; - if (vap->va_xflags & XFS_XFLAG_NOSYMLINKS) - di_flags |= XFS_DIFLAG_NOSYMLINKS; - if (vap->va_xflags & XFS_XFLAG_EXTSZINHERIT) - di_flags |= XFS_DIFLAG_EXTSZINHERIT; - } else if ((ip->i_d.di_mode & S_IFMT) == S_IFREG) { - if (vap->va_xflags & XFS_XFLAG_REALTIME) - di_flags |= XFS_DIFLAG_REALTIME; - if (vap->va_xflags & XFS_XFLAG_EXTSIZE) - di_flags |= XFS_DIFLAG_EXTSIZE; - } - ip->i_d.di_flags = di_flags; - } - xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); - timeflags |= XFS_ICHGTIME_CHG; - } - /* * Change file inode change time only if XFS_AT_CTIME set * AND we have been called by a DMI function. -- cgit v1.2.3 From 0f285c8a1c4cacfd9f2aec077b06e2b537ee57ab Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 18 Jul 2008 17:13:28 +1000 Subject: [XFS] Now that xfs_setattr is only used for attributes set from ->setattr it can be switched to take struct iattr directly and thus simplify the implementation greatly. Also rename the ATTR_ flags to XFS_ATTR_ to not conflict with the ATTR_ flags used by the VFS. SGI-PV: 984565 SGI-Modid: xfs-linux-melb:xfs-kern:31678a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_ioctl.c | 4 +- fs/xfs/linux-2.6/xfs_iops.c | 56 +++----------- fs/xfs/linux-2.6/xfs_vnode.h | 73 ------------------ fs/xfs/xfs_acl.c | 18 ++--- fs/xfs/xfs_dmapi.h | 2 +- fs/xfs/xfs_vnodeops.c | 172 ++++++++++++++++++------------------------- fs/xfs/xfs_vnodeops.h | 8 +- 7 files changed, 102 insertions(+), 231 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index d2bbb0532ef6..d1b0da6bcdca 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -688,9 +688,9 @@ xfs_ioc_space( return -XFS_ERROR(EFAULT); if (filp->f_flags & (O_NDELAY|O_NONBLOCK)) - attr_flags |= ATTR_NONBLOCK; + attr_flags |= XFS_ATTR_NONBLOCK; if (ioflags & IO_INVIS) - attr_flags |= ATTR_DMI; + attr_flags |= XFS_ATTR_DMI; error = xfs_change_file_space(ip, cmd, &bf, filp->f_pos, NULL, attr_flags); diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 7b42569968fe..669bbdc20857 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -648,54 +648,20 @@ xfs_vn_getattr( STATIC int xfs_vn_setattr( struct dentry *dentry, - struct iattr *attr) + struct iattr *iattr) { struct inode *inode = dentry->d_inode; - unsigned int ia_valid = attr->ia_valid; - bhv_vattr_t vattr = { 0 }; - int flags = 0; int error; - if (ia_valid & ATTR_UID) { - vattr.va_mask |= XFS_AT_UID; - vattr.va_uid = attr->ia_uid; - } - if (ia_valid & ATTR_GID) { - vattr.va_mask |= XFS_AT_GID; - vattr.va_gid = attr->ia_gid; - } - if (ia_valid & ATTR_SIZE) { - vattr.va_mask |= XFS_AT_SIZE; - vattr.va_size = attr->ia_size; - } - if (ia_valid & ATTR_ATIME) { - vattr.va_mask |= XFS_AT_ATIME; - vattr.va_atime = attr->ia_atime; - inode->i_atime = attr->ia_atime; - } - if (ia_valid & ATTR_MTIME) { - vattr.va_mask |= XFS_AT_MTIME; - vattr.va_mtime = attr->ia_mtime; - } - if (ia_valid & ATTR_CTIME) { - vattr.va_mask |= XFS_AT_CTIME; - vattr.va_ctime = attr->ia_ctime; - } - if (ia_valid & ATTR_MODE) { - vattr.va_mask |= XFS_AT_MODE; - vattr.va_mode = attr->ia_mode; + if (iattr->ia_valid & ATTR_ATIME) + inode->i_atime = iattr->ia_atime; + + if (iattr->ia_valid & ATTR_MODE) { if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID)) inode->i_mode &= ~S_ISGID; } - if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET)) - flags |= ATTR_UTIME; -#ifdef ATTR_NO_BLOCK - if ((ia_valid & ATTR_NO_BLOCK)) - flags |= ATTR_NONBLOCK; -#endif - - error = xfs_setattr(XFS_I(inode), &vattr, flags, NULL); + error = xfs_setattr(XFS_I(inode), iattr, 0, NULL); if (likely(!error)) vn_revalidate(vn_from_inode(inode)); return -error; @@ -739,18 +705,18 @@ xfs_vn_fallocate( xfs_ilock(ip, XFS_IOLOCK_EXCL); error = xfs_change_file_space(ip, XFS_IOC_RESVSP, &bf, - 0, NULL, ATTR_NOLOCK); + 0, NULL, XFS_ATTR_NOLOCK); if (!error && !(mode & FALLOC_FL_KEEP_SIZE) && offset + len > i_size_read(inode)) new_size = offset + len; /* Change file size if needed */ if (new_size) { - bhv_vattr_t va; + struct iattr iattr; - va.va_mask = XFS_AT_SIZE; - va.va_size = new_size; - error = xfs_setattr(ip, &va, ATTR_NOLOCK, NULL); + iattr.ia_valid = ATTR_SIZE; + iattr.ia_size = new_size; + error = xfs_setattr(ip, &iattr, XFS_ATTR_NOLOCK, NULL); } xfs_iunlock(ip, XFS_IOLOCK_EXCL); diff --git a/fs/xfs/linux-2.6/xfs_vnode.h b/fs/xfs/linux-2.6/xfs_vnode.h index 7797c9cdb591..96e4a7b5391c 100644 --- a/fs/xfs/linux-2.6/xfs_vnode.h +++ b/fs/xfs/linux-2.6/xfs_vnode.h @@ -19,7 +19,6 @@ #define __XFS_VNODE_H__ struct file; -struct bhv_vattr; struct xfs_iomap; struct attrlist_cursor_kern; @@ -66,69 +65,6 @@ static inline struct inode *vn_to_inode(bhv_vnode_t *vnode) Prevent VM access to the pages until the operation completes. */ -/* - * Vnode attributes. va_mask indicates those attributes the caller - * wants to set or extract. - */ -typedef struct bhv_vattr { - int va_mask; /* bit-mask of attributes present */ - mode_t va_mode; /* file access mode and type */ - xfs_nlink_t va_nlink; /* number of references to file */ - uid_t va_uid; /* owner user id */ - gid_t va_gid; /* owner group id */ - xfs_ino_t va_nodeid; /* file id */ - xfs_off_t va_size; /* file size in bytes */ - u_long va_blocksize; /* blocksize preferred for i/o */ - struct timespec va_atime; /* time of last access */ - struct timespec va_mtime; /* time of last modification */ - struct timespec va_ctime; /* time file changed */ - u_int va_gen; /* generation number of file */ - xfs_dev_t va_rdev; /* device the special file represents */ - __int64_t va_nblocks; /* number of blocks allocated */ - u_long va_xflags; /* random extended file flags */ - u_long va_extsize; /* file extent size */ - u_long va_nextents; /* number of extents in file */ - u_long va_anextents; /* number of attr extents in file */ - prid_t va_projid; /* project id */ -} bhv_vattr_t; - -/* - * setattr or getattr attributes - */ -#define XFS_AT_TYPE 0x00000001 -#define XFS_AT_MODE 0x00000002 -#define XFS_AT_UID 0x00000004 -#define XFS_AT_GID 0x00000008 -#define XFS_AT_FSID 0x00000010 -#define XFS_AT_NODEID 0x00000020 -#define XFS_AT_NLINK 0x00000040 -#define XFS_AT_SIZE 0x00000080 -#define XFS_AT_ATIME 0x00000100 -#define XFS_AT_MTIME 0x00000200 -#define XFS_AT_CTIME 0x00000400 -#define XFS_AT_RDEV 0x00000800 -#define XFS_AT_BLKSIZE 0x00001000 -#define XFS_AT_NBLOCKS 0x00002000 -#define XFS_AT_VCODE 0x00004000 -#define XFS_AT_MAC 0x00008000 -#define XFS_AT_UPDATIME 0x00010000 -#define XFS_AT_UPDMTIME 0x00020000 -#define XFS_AT_UPDCTIME 0x00040000 -#define XFS_AT_ACL 0x00080000 -#define XFS_AT_CAP 0x00100000 -#define XFS_AT_INF 0x00200000 -#define XFS_AT_NEXTENTS 0x01000000 -#define XFS_AT_ANEXTENTS 0x02000000 -#define XFS_AT_SIZE_NOPERM 0x08000000 -#define XFS_AT_GENCOUNT 0x10000000 - -#define XFS_AT_TIMES (XFS_AT_ATIME|XFS_AT_MTIME|XFS_AT_CTIME) - -#define XFS_AT_UPDTIMES (XFS_AT_UPDATIME|XFS_AT_UPDMTIME|XFS_AT_UPDCTIME) - -#define XFS_AT_NOSET (XFS_AT_NLINK|XFS_AT_RDEV|XFS_AT_FSID|XFS_AT_NODEID|\ - XFS_AT_TYPE|XFS_AT_BLKSIZE|XFS_AT_NBLOCKS|XFS_AT_VCODE|\ - XFS_AT_NEXTENTS|XFS_AT_ANEXTENTS|XFS_AT_GENCOUNT) extern void vn_init(void); extern int vn_revalidate(bhv_vnode_t *); @@ -204,15 +140,6 @@ static inline void vn_atime_to_time_t(bhv_vnode_t *vp, time_t *tt) #define VN_DIRTY(vp) mapping_tagged(vn_to_inode(vp)->i_mapping, \ PAGECACHE_TAG_DIRTY) -/* - * Flags to vop_setattr/getattr. - */ -#define ATTR_UTIME 0x01 /* non-default utime(2) request */ -#define ATTR_DMI 0x08 /* invocation from a DMI function */ -#define ATTR_LAZY 0x80 /* set/get attributes lazily */ -#define ATTR_NONBLOCK 0x100 /* return EAGAIN if operation would block */ -#define ATTR_NOLOCK 0x200 /* Don't grab any conflicting locks */ -#define ATTR_NOSIZETOK 0x400 /* Don't get the SIZE token */ /* * Tracking vnode activity. diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c index 93057af2fe3d..3e4648ad9cfc 100644 --- a/fs/xfs/xfs_acl.c +++ b/fs/xfs/xfs_acl.c @@ -719,7 +719,7 @@ xfs_acl_setmode( xfs_acl_t *acl, int *basicperms) { - bhv_vattr_t va; + struct iattr iattr; xfs_acl_entry_t *ap; xfs_acl_entry_t *gap = NULL; int i, nomask = 1; @@ -733,25 +733,25 @@ xfs_acl_setmode( * Copy the u::, g::, o::, and m:: bits from the ACL into the * mode. The m:: bits take precedence over the g:: bits. */ - va.va_mask = XFS_AT_MODE; - va.va_mode = xfs_vtoi(vp)->i_d.di_mode; - va.va_mode &= ~(S_IRWXU|S_IRWXG|S_IRWXO); + iattr.ia_valid = ATTR_MODE; + iattr.ia_mode = xfs_vtoi(vp)->i_d.di_mode; + iattr.ia_mode &= ~(S_IRWXU|S_IRWXG|S_IRWXO); ap = acl->acl_entry; for (i = 0; i < acl->acl_cnt; ++i) { switch (ap->ae_tag) { case ACL_USER_OBJ: - va.va_mode |= ap->ae_perm << 6; + iattr.ia_mode |= ap->ae_perm << 6; break; case ACL_GROUP_OBJ: gap = ap; break; case ACL_MASK: /* more than just standard modes */ nomask = 0; - va.va_mode |= ap->ae_perm << 3; + iattr.ia_mode |= ap->ae_perm << 3; *basicperms = 0; break; case ACL_OTHER: - va.va_mode |= ap->ae_perm; + iattr.ia_mode |= ap->ae_perm; break; default: /* more than just standard modes */ *basicperms = 0; @@ -762,9 +762,9 @@ xfs_acl_setmode( /* Set the group bits from ACL_GROUP_OBJ if there's no ACL_MASK */ if (gap && nomask) - va.va_mode |= gap->ae_perm << 3; + iattr.ia_mode |= gap->ae_perm << 3; - return xfs_setattr(xfs_vtoi(vp), &va, 0, sys_cred); + return xfs_setattr(xfs_vtoi(vp), &iattr, 0, sys_cred); } /* diff --git a/fs/xfs/xfs_dmapi.h b/fs/xfs/xfs_dmapi.h index f71784ab6a60..cdc2d3464a1a 100644 --- a/fs/xfs/xfs_dmapi.h +++ b/fs/xfs/xfs_dmapi.h @@ -166,6 +166,6 @@ typedef enum { #define FILP_DELAY_FLAG(filp) ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) ? \ DM_FLAGS_NDELAY : 0) -#define AT_DELAY_FLAG(f) ((f&ATTR_NONBLOCK) ? DM_FLAGS_NDELAY : 0) +#define AT_DELAY_FLAG(f) ((f & XFS_ATTR_NONBLOCK) ? DM_FLAGS_NDELAY : 0) #endif /* __XFS_DMAPI_H__ */ diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index ed399523b782..b792a121b1a7 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -75,19 +75,16 @@ xfs_open( return 0; } -/* - * xfs_setattr - */ int xfs_setattr( - xfs_inode_t *ip, - bhv_vattr_t *vap, + struct xfs_inode *ip, + struct iattr *iattr, int flags, cred_t *credp) { xfs_mount_t *mp = ip->i_mount; + int mask = iattr->ia_valid; xfs_trans_t *tp; - int mask; int code; uint lock_flags; uint commit_flags=0; @@ -103,30 +100,9 @@ xfs_setattr( if (mp->m_flags & XFS_MOUNT_RDONLY) return XFS_ERROR(EROFS); - /* - * Cannot set certain attributes. - */ - mask = vap->va_mask; - if (mask & XFS_AT_NOSET) { - return XFS_ERROR(EINVAL); - } - if (XFS_FORCED_SHUTDOWN(mp)) return XFS_ERROR(EIO); - /* - * Timestamps do not need to be logged and hence do not - * need to be done within a transaction. - */ - if (mask & XFS_AT_UPDTIMES) { - ASSERT((mask & ~XFS_AT_UPDTIMES) == 0); - timeflags = ((mask & XFS_AT_UPDATIME) ? XFS_ICHGTIME_ACC : 0) | - ((mask & XFS_AT_UPDCTIME) ? XFS_ICHGTIME_CHG : 0) | - ((mask & XFS_AT_UPDMTIME) ? XFS_ICHGTIME_MOD : 0); - xfs_ichgtime(ip, timeflags); - return 0; - } - olddquot1 = olddquot2 = NULL; udqp = gdqp = NULL; @@ -138,17 +114,17 @@ xfs_setattr( * If the IDs do change before we take the ilock, we're covered * because the i_*dquot fields will get updated anyway. */ - if (XFS_IS_QUOTA_ON(mp) && (mask & (XFS_AT_UID|XFS_AT_GID))) { + if (XFS_IS_QUOTA_ON(mp) && (mask & (ATTR_UID|ATTR_GID))) { uint qflags = 0; - if ((mask & XFS_AT_UID) && XFS_IS_UQUOTA_ON(mp)) { - uid = vap->va_uid; + if ((mask & ATTR_UID) && XFS_IS_UQUOTA_ON(mp)) { + uid = iattr->ia_uid; qflags |= XFS_QMOPT_UQUOTA; } else { uid = ip->i_d.di_uid; } - if ((mask & XFS_AT_GID) && XFS_IS_GQUOTA_ON(mp)) { - gid = vap->va_gid; + if ((mask & ATTR_GID) && XFS_IS_GQUOTA_ON(mp)) { + gid = iattr->ia_gid; qflags |= XFS_QMOPT_GQUOTA; } else { gid = ip->i_d.di_gid; @@ -173,10 +149,10 @@ xfs_setattr( */ tp = NULL; lock_flags = XFS_ILOCK_EXCL; - if (flags & ATTR_NOLOCK) + if (flags & XFS_ATTR_NOLOCK) need_iolock = 0; - if (!(mask & XFS_AT_SIZE)) { - if ((mask != (XFS_AT_CTIME|XFS_AT_ATIME|XFS_AT_MTIME)) || + if (!(mask & ATTR_SIZE)) { + if ((mask != (ATTR_CTIME|ATTR_ATIME|ATTR_MTIME)) || (mp->m_flags & XFS_MOUNT_WSYNC)) { tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE); commit_flags = 0; @@ -189,10 +165,10 @@ xfs_setattr( } } else { if (DM_EVENT_ENABLED(ip, DM_EVENT_TRUNCATE) && - !(flags & ATTR_DMI)) { + !(flags & XFS_ATTR_DMI)) { int dmflags = AT_DELAY_FLAG(flags) | DM_SEM_FLAG_WR; code = XFS_SEND_DATA(mp, DM_EVENT_TRUNCATE, ip, - vap->va_size, 0, dmflags, NULL); + iattr->ia_size, 0, dmflags, NULL); if (code) { lock_flags = 0; goto error_return; @@ -212,7 +188,7 @@ xfs_setattr( * Only the owner or users with CAP_FOWNER * capability may do these things. */ - if (mask & (XFS_AT_MODE|XFS_AT_UID|XFS_AT_GID)) { + if (mask & (ATTR_MODE|ATTR_UID|ATTR_GID)) { /* * CAP_FOWNER overrides the following restrictions: * @@ -236,21 +212,21 @@ xfs_setattr( * IDs of the calling process shall match the group owner of * the file when setting the set-group-ID bit on that file */ - if (mask & XFS_AT_MODE) { + if (mask & ATTR_MODE) { mode_t m = 0; - if ((vap->va_mode & S_ISUID) && !file_owner) + if ((iattr->ia_mode & S_ISUID) && !file_owner) m |= S_ISUID; - if ((vap->va_mode & S_ISGID) && + if ((iattr->ia_mode & S_ISGID) && !in_group_p((gid_t)ip->i_d.di_gid)) m |= S_ISGID; #if 0 /* Linux allows this, Irix doesn't. */ - if ((vap->va_mode & S_ISVTX) && !S_ISDIR(ip->i_d.di_mode)) + if ((iattr->ia_mode & S_ISVTX) && !S_ISDIR(ip->i_d.di_mode)) m |= S_ISVTX; #endif if (m && !capable(CAP_FSETID)) - vap->va_mode &= ~m; + iattr->ia_mode &= ~m; } } @@ -261,7 +237,7 @@ xfs_setattr( * and can change the group id only to a group of which he * or she is a member. */ - if (mask & (XFS_AT_UID|XFS_AT_GID)) { + if (mask & (ATTR_UID|ATTR_GID)) { /* * These IDs could have changed since we last looked at them. * But, we're assured that if the ownership did change @@ -270,8 +246,8 @@ xfs_setattr( */ iuid = ip->i_d.di_uid; igid = ip->i_d.di_gid; - gid = (mask & XFS_AT_GID) ? vap->va_gid : igid; - uid = (mask & XFS_AT_UID) ? vap->va_uid : iuid; + gid = (mask & ATTR_GID) ? iattr->ia_gid : igid; + uid = (mask & ATTR_UID) ? iattr->ia_uid : iuid; /* * CAP_CHOWN overrides the following restrictions: @@ -308,13 +284,13 @@ xfs_setattr( /* * Truncate file. Must have write permission and not be a directory. */ - if (mask & XFS_AT_SIZE) { + if (mask & ATTR_SIZE) { /* Short circuit the truncate case for zero length files */ - if ((vap->va_size == 0) && - (ip->i_size == 0) && (ip->i_d.di_nextents == 0)) { + if (iattr->ia_size == 0 && + ip->i_size == 0 && ip->i_d.di_nextents == 0) { xfs_iunlock(ip, XFS_ILOCK_EXCL); lock_flags &= ~XFS_ILOCK_EXCL; - if (mask & XFS_AT_CTIME) + if (mask & ATTR_CTIME) xfs_ichgtime(ip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG); code = 0; goto error_return; @@ -337,9 +313,9 @@ xfs_setattr( /* * Change file access or modified times. */ - if (mask & (XFS_AT_ATIME|XFS_AT_MTIME)) { + if (mask & (ATTR_ATIME|ATTR_MTIME)) { if (!file_owner) { - if ((flags & ATTR_UTIME) && + if ((mask & (ATTR_MTIME_SET|ATTR_ATIME_SET)) && !capable(CAP_FOWNER)) { code = XFS_ERROR(EPERM); goto error_return; @@ -349,23 +325,22 @@ xfs_setattr( /* * Now we can make the changes. Before we join the inode - * to the transaction, if XFS_AT_SIZE is set then take care of + * to the transaction, if ATTR_SIZE is set then take care of * the part of the truncation that must be done without the * inode lock. This needs to be done before joining the inode * to the transaction, because the inode cannot be unlocked * once it is a part of the transaction. */ - if (mask & XFS_AT_SIZE) { + if (mask & ATTR_SIZE) { code = 0; - if ((vap->va_size > ip->i_size) && - (flags & ATTR_NOSIZETOK) == 0) { + if (iattr->ia_size > ip->i_size) { /* * Do the first part of growing a file: zero any data * in the last block that is beyond the old EOF. We * need to do this before the inode is joined to the * transaction to modify the i_size. */ - code = xfs_zero_eof(ip, vap->va_size, ip->i_size); + code = xfs_zero_eof(ip, iattr->ia_size, ip->i_size); } xfs_iunlock(ip, XFS_ILOCK_EXCL); @@ -382,10 +357,10 @@ xfs_setattr( * not within the range we care about here. */ if (!code && - (ip->i_size != ip->i_d.di_size) && - (vap->va_size > ip->i_d.di_size)) { + ip->i_size != ip->i_d.di_size && + iattr->ia_size > ip->i_d.di_size) { code = xfs_flush_pages(ip, - ip->i_d.di_size, vap->va_size, + ip->i_d.di_size, iattr->ia_size, XFS_B_ASYNC, FI_NONE); } @@ -393,7 +368,7 @@ xfs_setattr( vn_iowait(ip); if (!code) - code = xfs_itruncate_data(ip, vap->va_size); + code = xfs_itruncate_data(ip, iattr->ia_size); if (code) { ASSERT(tp == NULL); lock_flags &= ~XFS_ILOCK_EXCL; @@ -422,31 +397,30 @@ xfs_setattr( /* * Truncate file. Must have write permission and not be a directory. */ - if (mask & XFS_AT_SIZE) { + if (mask & ATTR_SIZE) { /* * Only change the c/mtime if we are changing the size * or we are explicitly asked to change it. This handles * the semantic difference between truncate() and ftruncate() * as implemented in the VFS. */ - if (vap->va_size != ip->i_size || (mask & XFS_AT_CTIME)) + if (iattr->ia_size != ip->i_size || (mask & ATTR_CTIME)) timeflags |= XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG; - if (vap->va_size > ip->i_size) { - ip->i_d.di_size = vap->va_size; - ip->i_size = vap->va_size; - if (!(flags & ATTR_DMI)) + if (iattr->ia_size > ip->i_size) { + ip->i_d.di_size = iattr->ia_size; + ip->i_size = iattr->ia_size; + if (!(flags & XFS_ATTR_DMI)) xfs_ichgtime(ip, XFS_ICHGTIME_CHG); xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); - } else if ((vap->va_size <= ip->i_size) || - ((vap->va_size == 0) && ip->i_d.di_nextents)) { + } else if (iattr->ia_size <= ip->i_size || + (iattr->ia_size == 0 && ip->i_d.di_nextents)) { /* * signal a sync transaction unless * we're truncating an already unlinked * file on a wsync filesystem */ - code = xfs_itruncate_finish(&tp, ip, - (xfs_fsize_t)vap->va_size, + code = xfs_itruncate_finish(&tp, ip, iattr->ia_size, XFS_DATA_FORK, ((ip->i_d.di_nlink != 0 || !(mp->m_flags & XFS_MOUNT_WSYNC)) @@ -468,9 +442,9 @@ xfs_setattr( /* * Change file access modes. */ - if (mask & XFS_AT_MODE) { + if (mask & ATTR_MODE) { ip->i_d.di_mode &= S_IFMT; - ip->i_d.di_mode |= vap->va_mode & ~S_IFMT; + ip->i_d.di_mode |= iattr->ia_mode & ~S_IFMT; xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE); timeflags |= XFS_ICHGTIME_CHG; @@ -483,7 +457,7 @@ xfs_setattr( * and can change the group id only to a group of which he * or she is a member. */ - if (mask & (XFS_AT_UID|XFS_AT_GID)) { + if (mask & (ATTR_UID|ATTR_GID)) { /* * CAP_FSETID overrides the following restrictions: * @@ -501,7 +475,7 @@ xfs_setattr( */ if (iuid != uid) { if (XFS_IS_UQUOTA_ON(mp)) { - ASSERT(mask & XFS_AT_UID); + ASSERT(mask & ATTR_UID); ASSERT(udqp); olddquot1 = XFS_QM_DQVOPCHOWN(mp, tp, ip, &ip->i_udquot, udqp); @@ -511,7 +485,7 @@ xfs_setattr( if (igid != gid) { if (XFS_IS_GQUOTA_ON(mp)) { ASSERT(!XFS_IS_PQUOTA_ON(mp)); - ASSERT(mask & XFS_AT_GID); + ASSERT(mask & ATTR_GID); ASSERT(gdqp); olddquot2 = XFS_QM_DQVOPCHOWN(mp, tp, ip, &ip->i_gdquot, gdqp); @@ -527,31 +501,31 @@ xfs_setattr( /* * Change file access or modified times. */ - if (mask & (XFS_AT_ATIME|XFS_AT_MTIME)) { - if (mask & XFS_AT_ATIME) { - ip->i_d.di_atime.t_sec = vap->va_atime.tv_sec; - ip->i_d.di_atime.t_nsec = vap->va_atime.tv_nsec; + if (mask & (ATTR_ATIME|ATTR_MTIME)) { + if (mask & ATTR_ATIME) { + ip->i_d.di_atime.t_sec = iattr->ia_atime.tv_sec; + ip->i_d.di_atime.t_nsec = iattr->ia_atime.tv_nsec; ip->i_update_core = 1; timeflags &= ~XFS_ICHGTIME_ACC; } - if (mask & XFS_AT_MTIME) { - ip->i_d.di_mtime.t_sec = vap->va_mtime.tv_sec; - ip->i_d.di_mtime.t_nsec = vap->va_mtime.tv_nsec; + if (mask & ATTR_MTIME) { + ip->i_d.di_mtime.t_sec = iattr->ia_mtime.tv_sec; + ip->i_d.di_mtime.t_nsec = iattr->ia_mtime.tv_nsec; timeflags &= ~XFS_ICHGTIME_MOD; timeflags |= XFS_ICHGTIME_CHG; } - if (tp && (flags & ATTR_UTIME)) + if (tp && (mask & (ATTR_MTIME_SET|ATTR_ATIME_SET))) xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE); } /* - * Change file inode change time only if XFS_AT_CTIME set + * Change file inode change time only if ATTR_CTIME set * AND we have been called by a DMI function. */ - if ( (flags & ATTR_DMI) && (mask & XFS_AT_CTIME) ) { - ip->i_d.di_ctime.t_sec = vap->va_ctime.tv_sec; - ip->i_d.di_ctime.t_nsec = vap->va_ctime.tv_nsec; + if ((flags & XFS_ATTR_DMI) && (mask & ATTR_CTIME)) { + ip->i_d.di_ctime.t_sec = iattr->ia_ctime.tv_sec; + ip->i_d.di_ctime.t_nsec = iattr->ia_ctime.tv_nsec; ip->i_update_core = 1; timeflags &= ~XFS_ICHGTIME_CHG; } @@ -560,7 +534,7 @@ xfs_setattr( * Send out timestamp changes that need to be set to the * current time. Not done when called by a DMI function. */ - if (timeflags && !(flags & ATTR_DMI)) + if (timeflags && !(flags & XFS_ATTR_DMI)) xfs_ichgtime(ip, timeflags); XFS_STATS_INC(xs_ig_attrchg); @@ -598,7 +572,7 @@ xfs_setattr( } if (DM_EVENT_ENABLED(ip, DM_EVENT_ATTRIBUTE) && - !(flags & ATTR_DMI)) { + !(flags & XFS_ATTR_DMI)) { (void) XFS_SEND_NAMESP(mp, DM_EVENT_ATTRIBUTE, ip, DM_RIGHT_NULL, NULL, DM_RIGHT_NULL, NULL, NULL, 0, 0, AT_DELAY_FLAG(flags)); @@ -3113,7 +3087,7 @@ xfs_alloc_file_space( /* Generate a DMAPI event if needed. */ if (alloc_type != 0 && offset < ip->i_size && - (attr_flags&ATTR_DMI) == 0 && + (attr_flags & XFS_ATTR_DMI) == 0 && DM_EVENT_ENABLED(ip, DM_EVENT_WRITE)) { xfs_off_t end_dmi_offset; @@ -3227,7 +3201,7 @@ retry: allocatesize_fsb -= allocated_fsb; } dmapi_enospc_check: - if (error == ENOSPC && (attr_flags & ATTR_DMI) == 0 && + if (error == ENOSPC && (attr_flags & XFS_ATTR_DMI) == 0 && DM_EVENT_ENABLED(ip, DM_EVENT_NOSPACE)) { error = XFS_SEND_NAMESP(mp, DM_EVENT_NOSPACE, ip, DM_RIGHT_NULL, @@ -3374,7 +3348,7 @@ xfs_free_file_space( end_dmi_offset = offset + len; endoffset_fsb = XFS_B_TO_FSBT(mp, end_dmi_offset); - if (offset < ip->i_size && (attr_flags & ATTR_DMI) == 0 && + if (offset < ip->i_size && (attr_flags & XFS_ATTR_DMI) == 0 && DM_EVENT_ENABLED(ip, DM_EVENT_WRITE)) { if (end_dmi_offset > ip->i_size) end_dmi_offset = ip->i_size; @@ -3385,7 +3359,7 @@ xfs_free_file_space( return error; } - if (attr_flags & ATTR_NOLOCK) + if (attr_flags & XFS_ATTR_NOLOCK) need_iolock = 0; if (need_iolock) { xfs_ilock(ip, XFS_IOLOCK_EXCL); @@ -3562,7 +3536,7 @@ xfs_change_file_space( xfs_off_t startoffset; xfs_off_t llen; xfs_trans_t *tp; - bhv_vattr_t va; + struct iattr iattr; xfs_itrace_entry(ip); @@ -3636,10 +3610,10 @@ xfs_change_file_space( break; } - va.va_mask = XFS_AT_SIZE; - va.va_size = startoffset; + iattr.ia_valid = ATTR_SIZE; + iattr.ia_size = startoffset; - error = xfs_setattr(ip, &va, attr_flags, credp); + error = xfs_setattr(ip, &iattr, attr_flags, credp); if (error) return error; @@ -3669,7 +3643,7 @@ xfs_change_file_space( xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); xfs_trans_ihold(tp, ip); - if ((attr_flags & ATTR_DMI) == 0) { + if ((attr_flags & XFS_ATTR_DMI) == 0) { ip->i_d.di_mode &= ~S_ISUID; /* diff --git a/fs/xfs/xfs_vnodeops.h b/fs/xfs/xfs_vnodeops.h index 454fa9a3e526..e932a96bec54 100644 --- a/fs/xfs/xfs_vnodeops.h +++ b/fs/xfs/xfs_vnodeops.h @@ -2,9 +2,9 @@ #define _XFS_VNODEOPS_H 1 struct attrlist_cursor_kern; -struct bhv_vattr; struct cred; struct file; +struct iattr; struct inode; struct iovec; struct kiocb; @@ -15,8 +15,12 @@ struct xfs_iomap; int xfs_open(struct xfs_inode *ip); -int xfs_setattr(struct xfs_inode *ip, struct bhv_vattr *vap, int flags, +int xfs_setattr(struct xfs_inode *ip, struct iattr *vap, int flags, struct cred *credp); +#define XFS_ATTR_DMI 0x01 /* invocation from a DMI function */ +#define XFS_ATTR_NONBLOCK 0x02 /* return EAGAIN if operation would block */ +#define XFS_ATTR_NOLOCK 0x04 /* Don't grab any conflicting locks */ + int xfs_readlink(struct xfs_inode *ip, char *link); int xfs_fsync(struct xfs_inode *ip); int xfs_release(struct xfs_inode *ip); -- cgit v1.2.3 From f13fae2d2a9372a5155d20bc9da4c14f02193277 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 21 Jul 2008 16:16:15 +1000 Subject: [XFS] Remove vn_revalidate calls in xfs. These days most of the attributes in struct inode are properly kept in sync by XFS. This patch removes the need for vn_revalidate completely by: - keeping inode.i_flags uptodate after any flags are updated in xfs_ioctl_setattr - keeping i_mode, i_uid and i_gid uptodate in xfs_setattr SGI-PV: 984566 SGI-Modid: xfs-linux-melb:xfs-kern:31679a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_ioctl.c | 29 +++++++++++++++++++++++-- fs/xfs/linux-2.6/xfs_iops.c | 16 +------------- fs/xfs/linux-2.6/xfs_vnode.c | 50 -------------------------------------------- fs/xfs/linux-2.6/xfs_vnode.h | 1 - fs/xfs/linux-2.6/xfs_xattr.c | 7 ++----- fs/xfs/xfs_vnodeops.c | 9 ++++++++ 6 files changed, 39 insertions(+), 73 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index d1b0da6bcdca..acb978d9d085 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -923,6 +923,30 @@ xfs_set_diflags( ip->i_d.di_flags = di_flags; } +STATIC void +xfs_diflags_to_linux( + struct xfs_inode *ip) +{ + struct inode *inode = XFS_ITOV(ip); + unsigned int xflags = xfs_ip2xflags(ip); + + if (xflags & XFS_XFLAG_IMMUTABLE) + inode->i_flags |= S_IMMUTABLE; + else + inode->i_flags &= ~S_IMMUTABLE; + if (xflags & XFS_XFLAG_APPEND) + inode->i_flags |= S_APPEND; + else + inode->i_flags &= ~S_APPEND; + if (xflags & XFS_XFLAG_SYNC) + inode->i_flags |= S_SYNC; + else + inode->i_flags &= ~S_SYNC; + if (xflags & XFS_XFLAG_NOATIME) + inode->i_flags |= S_NOATIME; + else + inode->i_flags &= ~S_NOATIME; +} #define FSX_PROJID 1 #define FSX_EXTSIZE 2 @@ -1121,8 +1145,10 @@ xfs_ioctl_setattr( if (mask & FSX_EXTSIZE) ip->i_d.di_extsize = fa->fsx_extsize >> mp->m_sb.sb_blocklog; - if (mask & FSX_XFLAGS) + if (mask & FSX_XFLAGS) { xfs_set_diflags(ip, fa->fsx_xflags); + xfs_diflags_to_linux(ip); + } xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); xfs_ichgtime(ip, XFS_ICHGTIME_CHG); @@ -1160,7 +1186,6 @@ xfs_ioctl_setattr( (mask & FSX_NONBLOCK) ? DM_FLAGS_NDELAY : 0); } - vn_revalidate(XFS_ITOV(ip)); /* update flags */ return 0; error_return: diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 669bbdc20857..e88f51028086 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -650,21 +650,7 @@ xfs_vn_setattr( struct dentry *dentry, struct iattr *iattr) { - struct inode *inode = dentry->d_inode; - int error; - - if (iattr->ia_valid & ATTR_ATIME) - inode->i_atime = iattr->ia_atime; - - if (iattr->ia_valid & ATTR_MODE) { - if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID)) - inode->i_mode &= ~S_ISGID; - } - - error = xfs_setattr(XFS_I(inode), iattr, 0, NULL); - if (likely(!error)) - vn_revalidate(vn_from_inode(inode)); - return -error; + return -xfs_setattr(XFS_I(dentry->d_inode), iattr, 0, NULL); } /* diff --git a/fs/xfs/linux-2.6/xfs_vnode.c b/fs/xfs/linux-2.6/xfs_vnode.c index bc7afe007338..25488b6d9881 100644 --- a/fs/xfs/linux-2.6/xfs_vnode.c +++ b/fs/xfs/linux-2.6/xfs_vnode.c @@ -82,56 +82,6 @@ vn_ioerror( xfs_do_force_shutdown(ip->i_mount, SHUTDOWN_DEVICE_REQ, f, l); } -/* - * Revalidate the Linux inode from the XFS inode. - * Note: i_size _not_ updated; we must hold the inode - * semaphore when doing that - callers responsibility. - */ -int -vn_revalidate( - bhv_vnode_t *vp) -{ - struct inode *inode = vn_to_inode(vp); - struct xfs_inode *ip = XFS_I(inode); - struct xfs_mount *mp = ip->i_mount; - unsigned long xflags; - - xfs_itrace_entry(ip); - - if (XFS_FORCED_SHUTDOWN(mp)) - return -EIO; - - xfs_ilock(ip, XFS_ILOCK_SHARED); - inode->i_mode = ip->i_d.di_mode; - inode->i_uid = ip->i_d.di_uid; - inode->i_gid = ip->i_d.di_gid; - inode->i_mtime.tv_sec = ip->i_d.di_mtime.t_sec; - inode->i_mtime.tv_nsec = ip->i_d.di_mtime.t_nsec; - inode->i_ctime.tv_sec = ip->i_d.di_ctime.t_sec; - inode->i_ctime.tv_nsec = ip->i_d.di_ctime.t_nsec; - - xflags = xfs_ip2xflags(ip); - if (xflags & XFS_XFLAG_IMMUTABLE) - inode->i_flags |= S_IMMUTABLE; - else - inode->i_flags &= ~S_IMMUTABLE; - if (xflags & XFS_XFLAG_APPEND) - inode->i_flags |= S_APPEND; - else - inode->i_flags &= ~S_APPEND; - if (xflags & XFS_XFLAG_SYNC) - inode->i_flags |= S_SYNC; - else - inode->i_flags &= ~S_SYNC; - if (xflags & XFS_XFLAG_NOATIME) - inode->i_flags |= S_NOATIME; - else - inode->i_flags &= ~S_NOATIME; - xfs_iunlock(ip, XFS_ILOCK_SHARED); - - xfs_iflags_clear(ip, XFS_IMODIFIED); - return 0; -} /* * Add a reference to a referenced vnode. diff --git a/fs/xfs/linux-2.6/xfs_vnode.h b/fs/xfs/linux-2.6/xfs_vnode.h index 96e4a7b5391c..41ca2cec5d31 100644 --- a/fs/xfs/linux-2.6/xfs_vnode.h +++ b/fs/xfs/linux-2.6/xfs_vnode.h @@ -67,7 +67,6 @@ static inline struct inode *vn_to_inode(bhv_vnode_t *vnode) extern void vn_init(void); -extern int vn_revalidate(bhv_vnode_t *); /* * Yeah, these don't take vnode anymore at all, all this should be diff --git a/fs/xfs/linux-2.6/xfs_xattr.c b/fs/xfs/linux-2.6/xfs_xattr.c index b4acb68fc9f7..964621fde6ed 100644 --- a/fs/xfs/linux-2.6/xfs_xattr.c +++ b/fs/xfs/linux-2.6/xfs_xattr.c @@ -64,7 +64,7 @@ static int xfs_xattr_system_set(struct inode *inode, const char *name, const void *value, size_t size, int flags) { - int error, acl; + int acl; acl = xfs_decode_acl(name); if (acl < 0) @@ -75,10 +75,7 @@ xfs_xattr_system_set(struct inode *inode, const char *name, if (!value) return xfs_acl_vremove(inode, acl); - error = xfs_acl_vset(inode, (void *)value, size, acl); - if (!error) - vn_revalidate(inode); - return error; + return xfs_acl_vset(inode, (void *)value, size, acl); } static struct xattr_handler xfs_xattr_system_handler = { diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index b792a121b1a7..76a1166af822 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -83,6 +83,7 @@ xfs_setattr( cred_t *credp) { xfs_mount_t *mp = ip->i_mount; + struct inode *inode = XFS_ITOV(ip); int mask = iattr->ia_valid; xfs_trans_t *tp; int code; @@ -446,6 +447,9 @@ xfs_setattr( ip->i_d.di_mode &= S_IFMT; ip->i_d.di_mode |= iattr->ia_mode & ~S_IFMT; + inode->i_mode &= S_IFMT; + inode->i_mode |= iattr->ia_mode & ~S_IFMT; + xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE); timeflags |= XFS_ICHGTIME_CHG; } @@ -481,6 +485,7 @@ xfs_setattr( &ip->i_udquot, udqp); } ip->i_d.di_uid = uid; + inode->i_uid = uid; } if (igid != gid) { if (XFS_IS_GQUOTA_ON(mp)) { @@ -491,6 +496,7 @@ xfs_setattr( &ip->i_gdquot, gdqp); } ip->i_d.di_gid = gid; + inode->i_gid = gid; } xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE); @@ -503,12 +509,14 @@ xfs_setattr( */ if (mask & (ATTR_ATIME|ATTR_MTIME)) { if (mask & ATTR_ATIME) { + inode->i_atime = iattr->ia_atime; ip->i_d.di_atime.t_sec = iattr->ia_atime.tv_sec; ip->i_d.di_atime.t_nsec = iattr->ia_atime.tv_nsec; ip->i_update_core = 1; timeflags &= ~XFS_ICHGTIME_ACC; } if (mask & ATTR_MTIME) { + inode->i_mtime = iattr->ia_mtime; ip->i_d.di_mtime.t_sec = iattr->ia_mtime.tv_sec; ip->i_d.di_mtime.t_nsec = iattr->ia_mtime.tv_nsec; timeflags &= ~XFS_ICHGTIME_MOD; @@ -524,6 +532,7 @@ xfs_setattr( */ if ((flags & XFS_ATTR_DMI) && (mask & ATTR_CTIME)) { + inode->i_ctime = iattr->ia_ctime; ip->i_d.di_ctime.t_sec = iattr->ia_ctime.tv_sec; ip->i_d.di_ctime.t_nsec = iattr->ia_ctime.tv_nsec; ip->i_update_core = 1; -- cgit v1.2.3 From 17b6f586b8e27914b36c9ed7f3e4d289e6274a80 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 28 Jul 2008 00:44:29 -0700 Subject: sparc64: Fix global reg snapshotting on self-cpu. We were picking %i7 out of the wrong register window stack slot. Signed-off-by: David S. Miller --- arch/sparc64/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index 8a9cd3e165b9..0f60547c24d9 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -319,7 +319,7 @@ static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs, rw = (struct reg_window *) (regs->u_regs[UREG_FP] + STACK_BIAS); - global_reg_snapshot[this_cpu].i7 = rw->ins[6]; + global_reg_snapshot[this_cpu].i7 = rw->ins[7]; } else global_reg_snapshot[this_cpu].i7 = 0; -- cgit v1.2.3 From 221d62c1882d05fc20163347d7e6af279bdffb8e Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 16 Jul 2008 08:46:08 +0200 Subject: [ARM] mx2: add missing Kconfig dependency It seems this small label was lost in the last merge. Without it no CPU type is selected for the MX2 family of processors. And a build will fail badly... Signed-off-by: Juergen Beisert Signed-off-by: Sascha Hauer --- arch/arm/mm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 3a6c8ec34cd9..399d1d66bf93 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -187,7 +187,7 @@ config CPU_ARM926T ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \ ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \ ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \ - ARCH_NS9XXX || ARCH_DAVINCI + ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2 default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || \ ARCH_OMAP730 || ARCH_OMAP16XX || \ ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \ -- cgit v1.2.3 From 2809fc06f2fc0aac180644cabf9330e50f015bbb Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 18 Jul 2008 08:33:26 +0200 Subject: [ARM] mx1ads: make mmc platform data available for modules Signed-off-by: Paulius Zaleckas Acked-by: Pavel Pisa Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mx1ads.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index 9635d5812bcd..baeff24ff02d 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -125,7 +125,7 @@ static struct platform_device *devices[] __initdata = { &imx_uart2_device, }; -#ifdef CONFIG_MMC_IMX +#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE) static int mx1ads_mmc_card_present(struct device *dev) { /* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */ @@ -143,7 +143,7 @@ mx1ads_init(void) #ifdef CONFIG_LEDS imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2); #endif -#ifdef CONFIG_MMC_IMX +#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE) /* SD/MMC card detect */ imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20); imx_set_mmc_info(&mx1ads_mmc_info); -- cgit v1.2.3 From d7098e31404a25f70f82aa7513e7f5893763576b Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Thu, 17 Jul 2008 19:10:20 +0300 Subject: [ARM] i.MX: remove set_imx_fb_info() export Remove not needed export and fix warning: WARNING: vmlinux.o(__ksymtab+0x400): Section mismatch in reference from the variable __ksymtab_set_imx_fb_info to the function .init.text:set_imx_fb_info() The symbol set_imx_fb_info is exported and annotated __init Fix this by removing the __init annotation of set_imx_fb_info or drop the export. Signed-off-by: Paulius Zaleckas Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/generic.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c index 98ddd8a6d05f..c40650dcddf5 100644 --- a/arch/arm/mach-imx/generic.c +++ b/arch/arm/mach-imx/generic.c @@ -251,7 +251,6 @@ void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info) { memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imxfb_mach_info)); } -EXPORT_SYMBOL(set_imx_fb_info); static struct resource imxfb_resources[] = { [0] = { -- cgit v1.2.3 From 79a13b29782e252d4f4e8f6111b978519b876cf7 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Mon, 21 Jul 2008 18:44:13 +0300 Subject: [ARM] i.MX: add missing clock functions exports Export missing Clock API symbols. Signed-off-by: Paulius Zaleckas Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/clock.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c index 6a90fe5578df..8915a5fc63cd 100644 --- a/arch/arm/mach-imx/clock.c +++ b/arch/arm/mach-imx/clock.c @@ -172,24 +172,29 @@ found: return clk; } +EXPORT_SYMBOL(clk_get); void clk_put(struct clk *clk) { } +EXPORT_SYMBOL(clk_put); int clk_enable(struct clk *clk) { return 0; } +EXPORT_SYMBOL(clk_enable); void clk_disable(struct clk *clk) { } +EXPORT_SYMBOL(clk_disable); unsigned long clk_get_rate(struct clk *clk) { return clk->get_rate(); } +EXPORT_SYMBOL(clk_get_rate); int imx_clocks_init(void) { -- cgit v1.2.3 From 86183a5fd0ce67cb28d6e4af4775105edc8872b7 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 24 Jul 2008 23:50:35 +0200 Subject: [ARM] add Sascha Hauer as Freescale i.MX Maintainer Signed-off-by: Sascha Hauer --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 03c5d6ccb9f8..de35fb7edd68 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -502,6 +502,12 @@ L: openezx-devel@lists.openezx.org (subscribers-only) W: http://www.openezx.org/ S: Maintained +ARM/FREESCALE IMX / MXC ARM ARCHITECTURE +P: Sascha Hauer +M: kernel@pengutronix.de +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +S: Maintained + ARM/GLOMATION GESBC9312SX MACHINE SUPPORT P: Lennert Buytenhek M: kernel@wantstofly.org -- cgit v1.2.3 From 157124c11f4217733691223ecf5ee47558ae9495 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 28 Jul 2008 11:53:11 +0200 Subject: sched: fix warning in hrtick_start_fair() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Benjamin Herrenschmidt reported: > I get that on ppc64 ... > > In file included from kernel/sched.c:1595: > kernel/sched_fair.c: In function ‘hrtick_start_fair’: > kernel/sched_fair.c:902: warning: comparison of distinct pointer types lacks a cast > > Probably harmless but annoying. s64 delta = slice - ran; --> delta = max(10000LL, delta); Probably ppc64's s64 is long vs long long.. I think hpa was looking at sanitizing all these 64bit types across the architectures. Use max_t with an explicit type meanwhile. Reported-by: Benjamin Herrenschmid Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index cf2cd6ce4cb2..0fe94ea43f32 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -899,7 +899,7 @@ static void hrtick_start_fair(struct rq *rq, struct task_struct *p) * doesn't make sense. Rely on vruntime for fairness. */ if (rq->curr != p) - delta = max(10000LL, delta); + delta = max_t(s64, 10000LL, delta); hrtick_start(rq, delta); } -- cgit v1.2.3 From 94f565598827e2015dce97f4c1ac4871ab84407b Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Sun, 27 Jul 2008 20:27:06 +0900 Subject: sched: fix SCHED_HRTICK dependency Currently, it seems SCHED_HRTICK allowed for !SMP. But, it seems to have no dependency of it. Fix it. Signed-off-by: OGAWA Hirofumi Signed-off-by: Ingo Molnar --- kernel/Kconfig.hz | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/Kconfig.hz b/kernel/Kconfig.hz index 382dd5a8b2d7..94fabd534b03 100644 --- a/kernel/Kconfig.hz +++ b/kernel/Kconfig.hz @@ -55,4 +55,4 @@ config HZ default 1000 if HZ_1000 config SCHED_HRTICK - def_bool HIGH_RES_TIMERS && USE_GENERIC_SMP_HELPERS + def_bool HIGH_RES_TIMERS && (!SMP || USE_GENERIC_SMP_HELPERS) -- cgit v1.2.3 From e193325e3e3de188ae2aa5207adc7129aacc5c9d Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 28 Jul 2008 10:43:22 +0200 Subject: cpm2: Implement GPIO LIB API on CPM2 Freescale SoC. This patch implement GPIO LIB support for the CPM2 GPIOs. The code can also be used for CPM1 GPIO port E, as both cores are compatible at the register level. Based on earlier work by Laurent Pinchart. Signed-off-by: Jochen Friedrich Cc: Laurent Pinchart Signed-off-by: Kumar Gala --- arch/powerpc/platforms/Kconfig | 2 + arch/powerpc/sysdev/cpm2.c | 11 ++++ arch/powerpc/sysdev/cpm_common.c | 123 +++++++++++++++++++++++++++++++++++++++ include/asm-powerpc/cpm.h | 3 + 4 files changed, 139 insertions(+) diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 1d0968775c0a..18a71839dc9e 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -254,6 +254,8 @@ config CPM2 select CPM select PPC_LIB_RHEAP select PPC_PCI_CHOICE + select ARCH_REQUIRE_GPIOLIB + select GENERIC_GPIO help The CPM2 (Communications Processor Module) is a coprocessor on embedded CPUs made by Freescale. Selecting this option means that diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c index 5a6c5dfc53ef..9311778a5082 100644 --- a/arch/powerpc/sysdev/cpm2.c +++ b/arch/powerpc/sysdev/cpm2.c @@ -377,3 +377,14 @@ void cpm2_set_pin(int port, int pin, int flags) else clrbits32(&iop[port].odr, pin); } + +static int cpm_init_par_io(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "fsl,cpm2-pario-bank") + cpm2_gpiochip_add32(np); + return 0; +} +arch_initcall(cpm_init_par_io); + diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c index e4b7296acb2c..53da8a079f96 100644 --- a/arch/powerpc/sysdev/cpm_common.c +++ b/arch/powerpc/sysdev/cpm_common.c @@ -19,6 +19,8 @@ #include #include +#include +#include #include #include @@ -28,6 +30,10 @@ #include +#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO) +#include +#endif + #ifdef CONFIG_PPC_EARLY_DEBUG_CPM static u32 __iomem *cpm_udbg_txdesc = (u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR; @@ -207,3 +213,120 @@ dma_addr_t cpm_muram_dma(void __iomem *addr) return muram_pbase + ((u8 __iomem *)addr - muram_vbase); } EXPORT_SYMBOL(cpm_muram_dma); + +#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO) + +struct cpm2_ioports { + u32 dir, par, sor, odr, dat; + u32 res[3]; +}; + +struct cpm2_gpio32_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u32 cpdata; +}; + +static inline struct cpm2_gpio32_chip * +to_cpm2_gpio32_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct cpm2_gpio32_chip, mm_gc); +} + +static void cpm2_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + + cpm2_gc->cpdata = in_be32(&iop->dat); +} + +static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + return !!(in_be32(&iop->dat) & pin_mask); +} + +static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + unsigned long flags; + u32 pin_mask = 1 << (31 - gpio); + + spin_lock_irqsave(&cpm2_gc->lock, flags); + + if (value) + cpm2_gc->cpdata |= pin_mask; + else + cpm2_gc->cpdata &= ~pin_mask; + + out_be32(&iop->dat, cpm2_gc->cpdata); + + spin_unlock_irqrestore(&cpm2_gc->lock, flags); +} + +static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + setbits32(&iop->dir, pin_mask); + + cpm2_gpio32_set(gc, gpio, val); + + return 0; +} + +static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + clrbits32(&iop->dir, pin_mask); + + return 0; +} + +int cpm2_gpiochip_add32(struct device_node *np) +{ + struct cpm2_gpio32_chip *cpm2_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL); + if (!cpm2_gc) + return -ENOMEM; + + spin_lock_init(&cpm2_gc->lock); + + mm_gc = &cpm2_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = cpm2_gpio32_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 32; + gc->direction_input = cpm2_gpio32_dir_in; + gc->direction_output = cpm2_gpio32_dir_out; + gc->get = cpm2_gpio32_get; + gc->set = cpm2_gpio32_set; + + return of_mm_gpiochip_add(np, mm_gc); +} +#endif /* CONFIG_CPM2 || CONFIG_8xx_GPIO */ diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h index 63a55337c2de..24d79e3abd8e 100644 --- a/include/asm-powerpc/cpm.h +++ b/include/asm-powerpc/cpm.h @@ -3,6 +3,7 @@ #include #include +#include /* Opcodes common to CPM1 and CPM2 */ @@ -100,4 +101,6 @@ unsigned long cpm_muram_offset(void __iomem *addr); dma_addr_t cpm_muram_dma(void __iomem *addr); int cpm_command(u32 command, u8 opcode); +int cpm2_gpiochip_add32(struct device_node *np); + #endif -- cgit v1.2.3 From dc2380ec8572fcd7f7e9579afc9fb223300d922f Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Thu, 3 Jul 2008 02:18:23 +1000 Subject: powerpc: implement GPIO LIB API on CPM1 Freescale SoC. This patch implement GPIO LIB support for the CPM1 GPIOs. Signed-off-by: Jochen Friedrich Signed-off-by: Kumar Gala --- arch/powerpc/platforms/8xx/Kconfig | 10 ++ arch/powerpc/sysdev/cpm1.c | 267 ++++++++++++++++++++++++++++++++++++- 2 files changed, 272 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 6fc849e51e48..71d7562e190b 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -105,6 +105,16 @@ config 8xx_COPYBACK If in doubt, say Y here. +config 8xx_GPIO + bool "GPIO API Support" + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Saying Y here will cause the ports on an MPC8xx processor to be used + with the GPIO API. If you say N here, the kernel needs less memory. + + If in doubt, say Y here. + config 8xx_CPU6 bool "CPU6 Silicon Errata (860 Pre Rev. C)" help diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index 661df42830b9..4a04823e8423 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -42,6 +43,10 @@ #include +#ifdef CONFIG_8xx_GPIO +#include +#endif + #define CPM_MAP_SIZE (0x4000) cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */ @@ -290,20 +295,24 @@ struct cpm_ioport16 { __be16 res[3]; }; -struct cpm_ioport32 { - __be32 dir, par, sor; +struct cpm_ioport32b { + __be32 dir, par, odr, dat; +}; + +struct cpm_ioport32e { + __be32 dir, par, sor, odr, dat; }; static void cpm1_set_pin32(int port, int pin, int flags) { - struct cpm_ioport32 __iomem *iop; + struct cpm_ioport32e __iomem *iop; pin = 1 << (31 - pin); if (port == CPM_PORTB) - iop = (struct cpm_ioport32 __iomem *) + iop = (struct cpm_ioport32e __iomem *) &mpc8xx_immr->im_cpm.cp_pbdir; else - iop = (struct cpm_ioport32 __iomem *) + iop = (struct cpm_ioport32e __iomem *) &mpc8xx_immr->im_cpm.cp_pedir; if (flags & CPM_PIN_OUTPUT) @@ -498,3 +507,251 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode) return 0; } + +/* + * GPIO LIB API implementation + */ +#ifdef CONFIG_8xx_GPIO + +struct cpm1_gpio16_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u16 cpdata; +}; + +static inline struct cpm1_gpio16_chip * +to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc); +} + +static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + + cpm1_gc->cpdata = in_be16(&iop->dat); +} + +static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + return !!(in_be16(&iop->dat) & pin_mask); +} + +static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + unsigned long flags; + u16 pin_mask = 1 << (15 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + if (value) + cpm1_gc->cpdata |= pin_mask; + else + cpm1_gc->cpdata &= ~pin_mask; + + out_be16(&iop->dat, cpm1_gc->cpdata); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); +} + +static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + setbits16(&iop->dir, pin_mask); + + cpm1_gpio16_set(gc, gpio, val); + + return 0; +} + +static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + clrbits16(&iop->dir, pin_mask); + + return 0; +} + +int cpm1_gpiochip_add16(struct device_node *np) +{ + struct cpm1_gpio16_chip *cpm1_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); + if (!cpm1_gc) + return -ENOMEM; + + spin_lock_init(&cpm1_gc->lock); + + mm_gc = &cpm1_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = cpm1_gpio16_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 16; + gc->direction_input = cpm1_gpio16_dir_in; + gc->direction_output = cpm1_gpio16_dir_out; + gc->get = cpm1_gpio16_get; + gc->set = cpm1_gpio16_set; + + return of_mm_gpiochip_add(np, mm_gc); +} + +struct cpm1_gpio32_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u32 cpdata; +}; + +static inline struct cpm1_gpio32_chip * +to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc); +} + +static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + + cpm1_gc->cpdata = in_be32(&iop->dat); +} + +static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + return !!(in_be32(&iop->dat) & pin_mask); +} + +static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + unsigned long flags; + u32 pin_mask = 1 << (31 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + if (value) + cpm1_gc->cpdata |= pin_mask; + else + cpm1_gc->cpdata &= ~pin_mask; + + out_be32(&iop->dat, cpm1_gc->cpdata); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); +} + +static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + setbits32(&iop->dir, pin_mask); + + cpm1_gpio32_set(gc, gpio, val); + + return 0; +} + +static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + clrbits32(&iop->dir, pin_mask); + + return 0; +} + +int cpm1_gpiochip_add32(struct device_node *np) +{ + struct cpm1_gpio32_chip *cpm1_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); + if (!cpm1_gc) + return -ENOMEM; + + spin_lock_init(&cpm1_gc->lock); + + mm_gc = &cpm1_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = cpm1_gpio32_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 32; + gc->direction_input = cpm1_gpio32_dir_in; + gc->direction_output = cpm1_gpio32_dir_out; + gc->get = cpm1_gpio32_get; + gc->set = cpm1_gpio32_set; + + return of_mm_gpiochip_add(np, mm_gc); +} + +static int cpm_init_par_io(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a") + cpm1_gpiochip_add16(np); + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b") + cpm1_gpiochip_add32(np); + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c") + cpm1_gpiochip_add16(np); + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d") + cpm1_gpiochip_add16(np); + + /* Port E uses CPM2 layout */ + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e") + cpm2_gpiochip_add32(np); + return 0; +} +arch_initcall(cpm_init_par_io); + +#endif /* CONFIG_8xx_GPIO */ -- cgit v1.2.3 From 7485d26b7e13ee8ff82adb271ac90a996c1fe830 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 24 Jul 2008 18:36:37 +0200 Subject: cpm_uart: Modem control lines support This patch replaces the get_mctrl/set_mctrl stubs with modem control line read/write access through the GPIO lib. Available modem control lines are described in the device tree using GPIO bindings. The driver expect a GPIO pin for each of the CTS, RTS, DCD, DSR, DTR and RI signals. Unused control lines can be left out. Signed-off-by: Laurent Pinchart Signed-off-by: Kumar Gala --- .../powerpc/dts-bindings/fsl/cpm_qe/serial.txt | 11 ++++++ drivers/serial/cpm_uart/cpm_uart.h | 10 ++++++ drivers/serial/cpm_uart/cpm_uart_core.c | 40 ++++++++++++++++++++-- 3 files changed, 58 insertions(+), 3 deletions(-) diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt index b35f3482e3e4..2ea76d9d137c 100644 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt @@ -7,6 +7,15 @@ Currently defined compatibles: - fsl,cpm2-scc-uart - fsl,qe-uart +Modem control lines connected to GPIO controllers are listed in the gpios +property as described in booting-without-of.txt, section IX.1 in the following +order: + +CTS, RTS, DCD, DSR, DTR, and RI. + +The gpios property is optional and can be left out when control lines are +not used. + Example: serial@11a00 { @@ -18,4 +27,6 @@ Example: interrupt-parent = <&PIC>; fsl,cpm-brg = <1>; fsl,cpm-command = <00800000>; + gpios = <&gpio_c 15 0 + &gpio_d 29 0>; }; diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index 5c76e0ae0582..5999ef5ac78e 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -50,6 +50,15 @@ #define SCC_WAIT_CLOSING 100 +#define GPIO_CTS 0 +#define GPIO_RTS 1 +#define GPIO_DCD 2 +#define GPIO_DSR 3 +#define GPIO_DTR 4 +#define GPIO_RI 5 + +#define NUM_GPIOS (GPIO_RI+1) + struct uart_cpm_port { struct uart_port port; u16 rx_nrfifos; @@ -82,6 +91,7 @@ struct uart_cpm_port { int wait_closing; /* value to combine with opcode to form cpm command */ u32 command; + int gpios[NUM_GPIOS]; }; extern int cpm_uart_nr; diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index a4f86927a74b..5e0c17f71653 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -43,6 +43,8 @@ #include #include #include +#include +#include #include #include @@ -96,13 +98,41 @@ static unsigned int cpm_uart_tx_empty(struct uart_port *port) static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { - /* Whee. Do nothing. */ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (pinfo->gpios[GPIO_RTS] >= 0) + gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS)); + + if (pinfo->gpios[GPIO_DTR] >= 0) + gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR)); } static unsigned int cpm_uart_get_mctrl(struct uart_port *port) { - /* Whee. Do nothing. */ - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + if (pinfo->gpios[GPIO_CTS] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_CTS])) + mctrl &= ~TIOCM_CTS; + } + + if (pinfo->gpios[GPIO_DSR] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DSR])) + mctrl &= ~TIOCM_DSR; + } + + if (pinfo->gpios[GPIO_DCD] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DCD])) + mctrl &= ~TIOCM_CAR; + } + + if (pinfo->gpios[GPIO_RI] >= 0) { + if (!gpio_get_value(pinfo->gpios[GPIO_RI])) + mctrl |= TIOCM_RNG; + } + + return mctrl; } /* @@ -991,6 +1021,7 @@ static int cpm_uart_init_port(struct device_node *np, void __iomem *mem, *pram; int len; int ret; + int i; data = of_get_property(np, "fsl,cpm-brg", &len); if (!data || len != 4) { @@ -1050,6 +1081,9 @@ static int cpm_uart_init_port(struct device_node *np, goto out_pram; } + for (i = 0; i < NUM_GPIOS; i++) + pinfo->gpios[i] = of_get_gpio(np, i); + return cpm_uart_request_port(&pinfo->port); out_pram: -- cgit v1.2.3 From 80776554b6c93cf828ddc702010c6a189aa0d0e9 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 28 Jul 2008 10:42:16 +0200 Subject: cpm_uart: Add generic clock API support to set baudrates This patch introduces baudrate setting support via the generic clock API. When present the optional device tree clock property is used instead of fsl-cpm-brg. Platforms can then define complex clock schemes, to output the serial clock on an external pin for instance. Signed-off-by: Laurent Pinchart Signed-off-by: Kumar Gala --- arch/powerpc/platforms/Kconfig | 1 + drivers/serial/cpm_uart/cpm_uart.h | 1 + drivers/serial/cpm_uart/cpm_uart_core.c | 26 +++++++++++++++++++------- 3 files changed, 21 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 18a71839dc9e..4c900efa164e 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -283,6 +283,7 @@ config FSL_ULI1575 config CPM bool + select PPC_CLOCK config OF_RTC bool diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index 5999ef5ac78e..7274b527a3c1 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -77,6 +77,7 @@ struct uart_cpm_port { unsigned char *rx_buf; u32 flags; void (*set_lineif)(struct uart_cpm_port *); + struct clk *clk; u8 brg; uint dp_addr; void *mem_addr; diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 5e0c17f71653..25efca5a7a1f 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include @@ -596,7 +597,10 @@ static void cpm_uart_set_termios(struct uart_port *port, out_be16(&sccp->scc_psmr, (sbits << 12) | scval); } - cpm_set_brg(pinfo->brg - 1, baud); + if (pinfo->clk) + clk_set_rate(pinfo->clk, baud); + else + cpm_set_brg(pinfo->brg - 1, baud); spin_unlock_irqrestore(&port->lock, flags); } @@ -1023,13 +1027,21 @@ static int cpm_uart_init_port(struct device_node *np, int ret; int i; - data = of_get_property(np, "fsl,cpm-brg", &len); - if (!data || len != 4) { - printk(KERN_ERR "CPM UART %s has no/invalid " - "fsl,cpm-brg property.\n", np->name); - return -EINVAL; + data = of_get_property(np, "clock", NULL); + if (data) { + struct clk *clk = clk_get(NULL, (const char*)data); + if (!IS_ERR(clk)) + pinfo->clk = clk; + } + if (!pinfo->clk) { + data = of_get_property(np, "fsl,cpm-brg", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %s has no/invalid " + "fsl,cpm-brg property.\n", np->name); + return -EINVAL; + } + pinfo->brg = *data; } - pinfo->brg = *data; data = of_get_property(np, "fsl,cpm-command", &len); if (!data || len != 4) { -- cgit v1.2.3 From e517881e427757afc3cce6d76173b1d898b30ab3 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 12 Jun 2008 03:04:31 +0400 Subject: powerpc: rtc_cmos_setup: assign interrupts only if there is i8259 PIC i8259 PIC is disabled on MPC8610HPCD boards, thus currently rtc-cmos driver fails to probe. To fix the issue, we lookup the device tree for "chrp,iic" and "pnpPNP,000" compatible devices, and if not found we do not assign RTC IRQ and assuming that i8259 was disabled. Though this patch fixes RTC on some boards (and surely should not break any other), the whole approach is still broken. We can't easily fix this though, because old device trees do not specify i8259 interrupts for the cmos rtc node. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/rtc_cmos_setup.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c index c09ddc0dbeb3..c1879ebfd4f4 100644 --- a/arch/powerpc/sysdev/rtc_cmos_setup.c +++ b/arch/powerpc/sysdev/rtc_cmos_setup.c @@ -21,6 +21,7 @@ static int __init add_rtc(void) struct device_node *np; struct platform_device *pd; struct resource res[2]; + unsigned int num_res = 1; int ret; memset(&res, 0, sizeof(res)); @@ -41,14 +42,24 @@ static int __init add_rtc(void) if (res[0].start != RTC_PORT(0)) return -EINVAL; - /* Use a fixed interrupt value of 8 since on PPC if we are using this - * its off an i8259 which we ensure has interrupt numbers 0..15. */ - res[1].start = 8; - res[1].end = 8; - res[1].flags = IORESOURCE_IRQ; + np = of_find_compatible_node(NULL, NULL, "chrp,iic"); + if (!np) + np = of_find_compatible_node(NULL, NULL, "pnpPNP,000"); + if (np) { + of_node_put(np); + /* + * Use a fixed interrupt value of 8 since on PPC if we are + * using this its off an i8259 which we ensure has interrupt + * numbers 0..15. + */ + res[1].start = 8; + res[1].end = 8; + res[1].flags = IORESOURCE_IRQ; + num_res++; + } pd = platform_device_register_simple("rtc_cmos", -1, - &res[0], 2); + &res[0], num_res); if (IS_ERR(pd)) return PTR_ERR(pd); -- cgit v1.2.3 From dddb8d311157d054da5441385f681b8cc0e5a94b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 22 Jul 2008 18:00:43 +0200 Subject: cpm2: Rework baud rate generators configuration to support external clocks. The CPM2 BRG setup functions cpm_setbrg and cpm2_fastbrg don't support external clocks. This patch adds a new exported __cpm2_setbrg function that takes the clock rate and clock source as extra parameters, and moves cpm_setbrg and cpm2_fastbrg to include/asm-powerpc/cpm2.h where they become inline wrappers around __cpm2_setbrg. Signed-off-by: Laurent Pinchart Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/cpm2.c | 34 ++++------------------------------ include/asm-powerpc/cpm2.h | 46 +++++++++++++++++++++++++++++++++------------- 2 files changed, 37 insertions(+), 43 deletions(-) diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c index 9311778a5082..f1c3395633b9 100644 --- a/arch/powerpc/sysdev/cpm2.c +++ b/arch/powerpc/sysdev/cpm2.c @@ -115,16 +115,10 @@ EXPORT_SYMBOL(cpm_command); * Baud rate clocks are zero-based in the driver code (as that maps * to port numbers). Documentation uses 1-based numbering. */ -#define BRG_INT_CLK (get_brgfreq()) -#define BRG_UART_CLK (BRG_INT_CLK/16) - -/* This function is used by UARTS, or anything else that uses a 16x - * oversampled clock. - */ -void -cpm_setbrg(uint brg, uint rate) +void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src) { u32 __iomem *bp; + u32 val; /* This is good enough to get SMCs running..... */ @@ -135,34 +129,14 @@ cpm_setbrg(uint brg, uint rate) brg -= 4; } bp += brg; - out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN); - - cpm2_unmap(bp); -} - -/* This function is used to set high speed synchronous baud rate - * clocks. - */ -void -cpm2_fastbrg(uint brg, uint rate, int div16) -{ - u32 __iomem *bp; - u32 val; - - if (brg < 4) { - bp = cpm2_map_size(im_brgc1, 16); - } else { - bp = cpm2_map_size(im_brgc5, 16); - brg -= 4; - } - bp += brg; - val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN; + val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src; if (div16) val |= CPM_BRG_DIV16; out_be32(bp, val); cpm2_unmap(bp); } +EXPORT_SYMBOL(__cpm2_setbrg); int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) { diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h index 2c7fd9cee291..2a6fa0183ac9 100644 --- a/include/asm-powerpc/cpm2.h +++ b/include/asm-powerpc/cpm2.h @@ -12,6 +12,7 @@ #include #include +#include #ifdef CONFIG_PPC_85xx #define CPM_MAP_ADDR (get_immrbase() + 0x80000) @@ -93,10 +94,40 @@ extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */ #define cpm_dpfree cpm_muram_free #define cpm_dpram_addr cpm_muram_addr -extern void cpm_setbrg(uint brg, uint rate); -extern void cpm2_fastbrg(uint brg, uint rate, int div16); extern void cpm2_reset(void); +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +#define CPM2_BRG_INT_CLK (get_brgfreq()) +#define CPM2_BRG_UART_CLK (CPM2_BRG_INT_CLK/16) + +extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src); + +/* This function is used by UARTS, or anything else that uses a 16x + * oversampled clock. + */ +static inline void cpm_setbrg(uint brg, uint rate) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT); +} + +/* This function is used to set high speed synchronous baud rate + * clocks. + */ +static inline void cpm2_fastbrg(uint brg, uint rate, int div16) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT); +} + /* Function code bits, usually generic to devices. */ #define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ @@ -195,17 +226,6 @@ typedef struct smc_uart { #define SMCM_TX ((unsigned char)0x02) #define SMCM_RX ((unsigned char)0x01) -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - /* SCCs. */ #define SCC_GSMRH_IRP ((uint)0x00040000) -- cgit v1.2.3 From e26873bb10f722f10b1af9de05119a3d7cbc07b2 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Tue, 22 Jul 2008 16:51:15 -0400 Subject: sched: test runtime rather than period in global_rt_runtime() Test runtime rather than period Signed-off-by: Roel Kluin Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 0236958addcb..0d1717b00225 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -834,7 +834,7 @@ static inline u64 global_rt_period(void) static inline u64 global_rt_runtime(void) { - if (sysctl_sched_rt_period < 0) + if (sysctl_sched_rt_runtime < 0) return RUNTIME_INF; return (u64)sysctl_sched_rt_runtime * NSEC_PER_USEC; -- cgit v1.2.3 From 2c3d103ba90827cfb478bf10464d9b5b9cea369c Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Fri, 25 Jul 2008 19:45:00 +0100 Subject: sched: move sched_clock before first use Move sched_clock() up to stop warning: weak declaration of `sched_clock' after first use results in unspecified behavior (if -fno-unit-at-a-time). Signed-off-by: Hugh Dickins Cc: Mike Travis Cc: Ben Herrenschmidt Cc: Linuxppc-dev@ozlabs.org Signed-off-by: Ingo Molnar --- kernel/sched_clock.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c index 22ed55d1167f..5a2dc7d8fd98 100644 --- a/kernel/sched_clock.c +++ b/kernel/sched_clock.c @@ -32,6 +32,15 @@ #include #include +/* + * Scheduler clock - returns current time in nanosec units. + * This is default implementation. + * Architectures and sub-architectures can override this. + */ +unsigned long long __attribute__((weak)) sched_clock(void) +{ + return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ); +} #ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK @@ -321,16 +330,6 @@ EXPORT_SYMBOL_GPL(sched_clock_idle_wakeup_event); #endif -/* - * Scheduler clock - returns current time in nanosec units. - * This is default implementation. - * Architectures and sub-architectures can override this. - */ -unsigned long long __attribute__((weak)) sched_clock(void) -{ - return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ); -} - unsigned long long cpu_clock(int cpu) { unsigned long long clock; -- cgit v1.2.3 From 0e09c863dbb8b1816ebc106df1a1cae4c588ce0e Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Mon, 28 Jul 2008 16:37:10 +0200 Subject: pcmcia: rsrc_nonstatic: check value, not pointer Bug found by Harvey Harrison and Stephen Rothwell. Signed-off-by: Dominik Brodowski --- drivers/pcmcia/rsrc_nonstatic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index d0c1d63d1891..203e579ebbd2 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -275,7 +275,7 @@ static int readable(struct pcmcia_socket *s, struct resource *res, destroy_cis_cache(s); } s->cis_mem.res = NULL; - if ((ret != 0) || (count == 0)) + if ((ret != 0) || (*count == 0)) return 0; return 1; } -- cgit v1.2.3 From 7c896834735f497cc405068d16a51717f993af7f Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 28 Jul 2008 16:57:22 +0100 Subject: [ARM] 5180/1: at91: Fix at91_nand -> atmel_nand rename fallout struct at91_nand has been renamed atmel_nand. Fix the four boards that were added since the patch was created. Signed-off-by: Haavard Skinnemoen Acked-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/board-qil-a9260.c | 2 +- arch/arm/mach-at91/board-sam9g20ek.c | 2 +- arch/arm/mach-at91/board-usb-a9260.c | 2 +- arch/arm/mach-at91/board-usb-a9263.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 99b4ec3818d6..f847a53b4eb6 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -140,7 +140,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 45617c201240..a751a7d615cf 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -143,7 +143,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio } /* det_pin is not connected */ -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, .rdy_pin = AT91_PIN_PC13, diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 837aedf8ffeb..0339a7b6f049 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -114,7 +114,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index 95800d32bd49..128570669812 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -127,7 +127,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected -- cgit v1.2.3 From 0e241ffd306c0896bb9959be7faa4d4cfcb706d9 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 24 Jul 2008 16:58:42 -0700 Subject: locking: fix mutex @key parameter kernel-doc notation Fix @key parameter to mutex_init() and one of its callers. Warning(linux-2.6.26-git11//drivers/base/class.c:210): No description found for parameter 'key' Signed-off-by: Randy Dunlap Acked-by: Greg Kroah-Hartman Signed-off-by: Ingo Molnar --- drivers/base/class.c | 1 + kernel/mutex.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/base/class.c b/drivers/base/class.c index 839d27cecb36..5667c2f02c51 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -198,6 +198,7 @@ static void class_create_release(struct class *cls) * class_create - create a struct class structure * @owner: pointer to the module that is to "own" this struct class * @name: pointer to a string for the name of this class. + * @key: the lock_class_key for this class; used by mutex lock debugging * * This is used to create a struct class pointer that can then be used * in calls to device_create(). diff --git a/kernel/mutex.c b/kernel/mutex.c index bcdc9ac8ef60..12c779dc65d4 100644 --- a/kernel/mutex.c +++ b/kernel/mutex.c @@ -34,6 +34,7 @@ /*** * mutex_init - initialize the mutex * @lock: the mutex to be initialized + * @key: the lock_class_key for the class; used by mutex lock debugging * * Initialize the mutex to unlocked state. * -- cgit v1.2.3 From 74deace2f952f7a28d2c516facc9954199881937 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 28 Jul 2008 14:50:31 -0400 Subject: Documentation: remove old sbc8260 board specific information This file contains 8 yr. old board specific information that was for the now gone ppc implementation, and it pre-dates widespread u-boot support. Any of the technical details of the board memory map would be more appropriately captured in a dts if I revive it as powerpc anyway. Signed-off-by: Paul Gortmaker Acked-by: Jason Wessel Signed-off-by: Kumar Gala --- Documentation/powerpc/00-INDEX | 2 - Documentation/powerpc/SBC8260_memory_mapping.txt | 197 ----------------------- 2 files changed, 199 deletions(-) delete mode 100644 Documentation/powerpc/SBC8260_memory_mapping.txt diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX index 3be84aa38dfe..29d839ce7327 100644 --- a/Documentation/powerpc/00-INDEX +++ b/Documentation/powerpc/00-INDEX @@ -20,8 +20,6 @@ mpc52xx-device-tree-bindings.txt - MPC5200 Device Tree Bindings ppc_htab.txt - info about the Linux/PPC /proc/ppc_htab entry -SBC8260_memory_mapping.txt - - EST SBC8260 board info smp.txt - use and state info about Linux/PPC on MP machines sound.txt diff --git a/Documentation/powerpc/SBC8260_memory_mapping.txt b/Documentation/powerpc/SBC8260_memory_mapping.txt deleted file mode 100644 index e6e9ee0506c3..000000000000 --- a/Documentation/powerpc/SBC8260_memory_mapping.txt +++ /dev/null @@ -1,197 +0,0 @@ -Please mail me (Jon Diekema, diekema_jon@si.com or diekema@cideas.com) -if you have questions, comments or corrections. - - * EST SBC8260 Linux memory mapping rules - - http://www.estc.com/ - http://www.estc.com/products/boards/SBC8260-8240_ds.html - - Initial conditions: - ------------------- - - Tasks that need to be perform by the boot ROM before control is - transferred to zImage (compressed Linux kernel): - - - Define the IMMR to 0xf0000000 - - - Initialize the memory controller so that RAM is available at - physical address 0x00000000. On the SBC8260 is this 16M (64M) - SDRAM. - - - The boot ROM should only clear the RAM that it is using. - - The reason for doing this is to enhances the chances of a - successful post mortem on a Linux panic. One of the first - items to examine is the 16k (LOG_BUF_LEN) circular console - buffer called log_buf which is defined in kernel/printk.c. - - - To enhance boot ROM performance, the I-cache can be enabled. - - Date: Mon, 22 May 2000 14:21:10 -0700 - From: Neil Russell - - LiMon (LInux MONitor) runs with and starts Linux with MMU - off, I-cache enabled, D-cache disabled. The I-cache doesn't - need hints from the MMU to work correctly as the D-cache - does. No D-cache means no special code to handle devices in - the presence of cache (no snooping, etc). The use of the - I-cache means that the monitor can run acceptably fast - directly from ROM, rather than having to copy it to RAM. - - - Build the board information structure (see - include/asm-ppc/est8260.h for its definition) - - - The compressed Linux kernel (zImage) contains a bootstrap loader - that is position independent; you can load it into any RAM, - ROM or FLASH memory address >= 0x00500000 (above 5 MB), or - at its link address of 0x00400000 (4 MB). - - Note: If zImage is loaded at its link address of 0x00400000 (4 MB), - then zImage will skip the step of moving itself to - its link address. - - - Load R3 with the address of the board information structure - - - Transfer control to zImage - - - The Linux console port is SMC1, and the baud rate is controlled - from the bi_baudrate field of the board information structure. - On thing to keep in mind when picking the baud rate, is that - there is no flow control on the SMC ports. I would stick - with something safe and standard like 19200. - - On the EST SBC8260, the SMC1 port is on the COM1 connector of - the board. - - - EST SBC8260 defaults: - --------------------- - - Chip - Memory Sel Bus Use - --------------------- --- --- ---------------------------------- - 0x00000000-0x03FFFFFF CS2 60x (16M or 64M)/64M SDRAM - 0x04000000-0x04FFFFFF CS4 local 4M/16M SDRAM (soldered to the board) - 0x21000000-0x21000000 CS7 60x 1B/64K Flash present detect (from the flash SIMM) - 0x21000001-0x21000001 CS7 60x 1B/64K Switches (read) and LEDs (write) - 0x22000000-0x2200FFFF CS5 60x 8K/64K EEPROM - 0xFC000000-0xFCFFFFFF CS6 60x 2M/16M flash (8 bits wide, soldered to the board) - 0xFE000000-0xFFFFFFFF CS0 60x 4M/16M flash (SIMM) - - Notes: - ------ - - - The chip selects can map 32K blocks and up (powers of 2) - - - The SDRAM machine can handled up to 128Mbytes per chip select - - - Linux uses the 60x bus memory (the SDRAM DIMM) for the - communications buffers. - - - BATs can map 128K-256Mbytes each. There are four data BATs and - four instruction BATs. Generally the data and instruction BATs - are mapped the same. - - - The IMMR must be set above the kernel virtual memory addresses, - which start at 0xC0000000. Otherwise, the kernel may crash as - soon as you start any threads or processes due to VM collisions - in the kernel or user process space. - - - Details from Dan Malek on 10/29/1999: - - The user application virtual space consumes the first 2 Gbytes - (0x00000000 to 0x7FFFFFFF). The kernel virtual text starts at - 0xC0000000, with data following. There is a "protection hole" - between the end of kernel data and the start of the kernel - dynamically allocated space, but this space is still within - 0xCxxxxxxx. - - Obviously the kernel can't map any physical addresses 1:1 in - these ranges. - - - Details from Dan Malek on 5/19/2000: - - During the early kernel initialization, the kernel virtual - memory allocator is not operational. Prior to this KVM - initialization, we choose to map virtual to physical addresses - 1:1. That is, the kernel virtual address exactly matches the - physical address on the bus. These mappings are typically done - in arch/ppc/kernel/head.S, or arch/ppc/mm/init.c. Only - absolutely necessary mappings should be done at this time, for - example board control registers or a serial uart. Normal device - driver initialization should map resources later when necessary. - - Although platform dependent, and certainly the case for embedded - 8xx, traditionally memory is mapped at physical address zero, - and I/O devices above physical address 0x80000000. The lowest - and highest (above 0xf0000000) I/O addresses are traditionally - used for devices or registers we need to map during kernel - initialization and prior to KVM operation. For this reason, - and since it followed prior PowerPC platform examples, I chose - to map the embedded 8xx kernel to the 0xc0000000 virtual address. - This way, we can enable the MMU to map the kernel for proper - operation, and still map a few windows before the KVM is operational. - - On some systems, you could possibly run the kernel at the - 0x80000000 or any other virtual address. It just depends upon - mapping that must be done prior to KVM operational. You can never - map devices or kernel spaces that overlap with the user virtual - space. This is why default IMMR mapping used by most BDM tools - won't work. They put the IMMR at something like 0x10000000 or - 0x02000000 for example. You simply can't map these addresses early - in the kernel, and continue proper system operation. - - The embedded 8xx/82xx kernel is mature enough that all you should - need to do is map the IMMR someplace at or above 0xf0000000 and it - should boot far enough to get serial console messages and KGDB - connected on any platform. There are lots of other subtle memory - management design features that you simply don't need to worry - about. If you are changing functions related to MMU initialization, - you are likely breaking things that are known to work and are - heading down a path of disaster and frustration. Your changes - should be to make the flexibility of the processor fit Linux, - not force arbitrary and non-workable memory mappings into Linux. - - - You don't want to change KERNELLOAD or KERNELBASE, otherwise the - virtual memory and MMU code will get confused. - - arch/ppc/Makefile:KERNELLOAD = 0xc0000000 - - include/asm-ppc/page.h:#define PAGE_OFFSET 0xc0000000 - include/asm-ppc/page.h:#define KERNELBASE PAGE_OFFSET - - - RAM is at physical address 0x00000000, and gets mapped to - virtual address 0xC0000000 for the kernel. - - - Physical addresses used by the Linux kernel: - -------------------------------------------- - - 0x00000000-0x3FFFFFFF 1GB reserved for RAM - 0xF0000000-0xF001FFFF 128K IMMR 64K used for dual port memory, - 64K for 8260 registers - - - Logical addresses used by the Linux kernel: - ------------------------------------------- - - 0xF0000000-0xFFFFFFFF 256M BAT0 (IMMR: dual port RAM, registers) - 0xE0000000-0xEFFFFFFF 256M BAT1 (I/O space for custom boards) - 0xC0000000-0xCFFFFFFF 256M BAT2 (RAM) - 0xD0000000-0xDFFFFFFF 256M BAT3 (if RAM > 256MByte) - - - EST SBC8260 Linux mapping: - -------------------------- - - DBAT0, IBAT0, cache inhibited: - - Chip - Memory Sel Use - --------------------- --- --------------------------------- - 0xF0000000-0xF001FFFF n/a IMMR: dual port RAM, registers - - DBAT1, IBAT1, cache inhibited: - -- cgit v1.2.3 From 6d0b365731682857ecc754163e7c5cb9edaae846 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 28 Jul 2008 22:31:02 +0900 Subject: sh: rsk7203: Add smc911x platform data. This hooks up platform data for the SMC9118 on the RSK+7203. Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/rsk7203/setup.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/sh/boards/renesas/rsk7203/setup.c b/arch/sh/boards/renesas/rsk7203/setup.c index 0bbda04b03b9..ffbedc59a973 100644 --- a/arch/sh/boards/renesas/rsk7203/setup.c +++ b/arch/sh/boards/renesas/rsk7203/setup.c @@ -10,13 +10,20 @@ #include #include #include +#include #include #include #include #include +#include #include #include +static struct smc911x_platdata smc911x_info = { + .flags = SMC911X_USE_16BIT, + .irq_flags = IRQF_TRIGGER_LOW, +}; + static struct resource smc911x_resources[] = { [0] = { .start = 0x24000000, @@ -35,6 +42,9 @@ static struct platform_device smc911x_device = { .id = -1, .num_resources = ARRAY_SIZE(smc911x_resources), .resource = smc911x_resources, + .dev = { + .platform_data = &smc911x_info, + }, }; static const char *probes[] = { "cmdlinepart", NULL }; -- cgit v1.2.3 From 11325f035edba6ba4bc005d2cdebea19d7d8f388 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 28 Jul 2008 22:31:43 +0900 Subject: sh: rsk7203: update defconfig. Signed-off-by: Paul Mundt --- arch/sh/configs/rsk7203_defconfig | 179 ++++++++++++++++++++++++++++++-------- 1 file changed, 142 insertions(+), 37 deletions(-) diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig index a0ebd439cbd2..840fe3843ffa 100644 --- a/arch/sh/configs/rsk7203_defconfig +++ b/arch/sh/configs/rsk7203_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Tue Jun 3 13:02:42 2008 +# Linux kernel version: 2.6.26 +# Mon Jul 28 22:23:03 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -33,21 +33,22 @@ CONFIG_LOCALVERSION="" CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +# CONFIG_IKCONFIG_PROC is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -72,26 +73,36 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y +# CONFIG_SLAB is not set # CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_SLOB=y CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_MODULES is not set +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -162,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -196,6 +209,7 @@ CONFIG_CPU_HAS_FPU=y # # Board support # +CONFIG_SH_RSK7203=y # # Timer and clock configuration @@ -274,6 +288,7 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel" # # Executable file formats # +CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y @@ -424,8 +439,8 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x20000000 -CONFIG_MTD_PHYSMAP_LEN=0x01000000 +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -456,9 +471,11 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -475,7 +492,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -487,15 +503,15 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set -CONFIG_SMC91X=y +# CONFIG_SMC91X is not set +CONFIG_SMC911X=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set -CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -503,6 +519,15 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -587,6 +612,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -605,6 +631,7 @@ CONFIG_SSB_POSSIBLE=y # Multimedia drivers # CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -618,26 +645,96 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +CONFIG_USB_R8A66597_HCD=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -677,6 +774,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -734,6 +832,7 @@ CONFIG_SYSFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y @@ -743,12 +842,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -775,16 +873,20 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_OBJECTS=y +# CONFIG_DEBUG_OBJECTS_SELFTEST is not set +# CONFIG_DEBUG_OBJECTS_FREE is not set +# CONFIG_DEBUG_OBJECTS_TIMERS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -797,12 +899,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set +CONFIG_DEBUG_VM=y +CONFIG_DEBUG_WRITECOUNT=y +# CONFIG_DEBUG_MEMORY_INIT is not set +CONFIG_DEBUG_LIST=y +CONFIG_DEBUG_SG=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set @@ -830,6 +934,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set -- cgit v1.2.3 From 103340cc36384c1afee4453b65a784d8b20d9d8d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 28 Jul 2008 22:32:03 +0900 Subject: sh: Fix up unaligned current_text_addr(). As noted by Adrian: Commit 3ab83521378268044a448113c6aa9a9e245f4d2f (kexec jump) causes the following build error on sh: <-- snip --> ... CC kernel/kexec.o {standard input}: Assembler messages: {standard input}:1518: Error: offset to unaligned destination make[2]: *** [kernel/kexec.o] Error 1 <-- snip --> If I understand the assembler correctly it fails at include/asm-sh/kexec.h:59 The issue here is that the mova reference lacks an explicit alignment, and previous code paths would end up with this on a 16-bit boundary, so we make the alignment explicit. Reported-by: Adrian Bunk Signed-off-by: Paul Mundt --- include/asm-sh/processor_32.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h index c6583f267071..0dadd75bd93c 100644 --- a/include/asm-sh/processor_32.h +++ b/include/asm-sh/processor_32.h @@ -19,7 +19,7 @@ * Default implementation of macro that returns current * instruction pointer ("program counter"). */ -#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n1:":"=z" (pc)); pc; }) +#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n.align 2\n1:":"=z" (pc)); pc; }) /* Core Processor Version Register */ #define CCN_PVR 0xff000030 -- cgit v1.2.3 From 5c806b208b390969a6051543e96bb4eae40554ac Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 06:34:01 +0900 Subject: MAINTAINERS: Switch SUPERH to Supported. Apparently the SH entry ought to be Supported instead of Maintained, given the suble difference in terminology. Though it's been this way for years now, thanks to Renesas. Signed-off-by: Paul Mundt --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index deedc0d827b5..5f043d19cedc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3968,7 +3968,7 @@ M: lethal@linux-sh.org L: linux-sh@vger.kernel.org W: http://www.linux-sh.org T: git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git -S: Maintained +S: Supported SUN3/3X P: Sam Creasey -- cgit v1.2.3 From 25326277d8d1393d1c66240e6255aca780f9e3eb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 06:39:26 +0900 Subject: video: Kill off leaked CONFIG_FB_SH7343VOU reference. This came in with the SH-Mobile LCDC changes in commit cfb4f5d1750e05f43902197713c50c29e7dfbc99, kill it off. Reported-by: Robert P. J. Day Signed-off-by: Paul Mundt --- drivers/video/Makefile | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 0ebc1bfd2514..a6b55297a7fb 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -118,7 +118,6 @@ obj-$(CONFIG_FB_PS3) += ps3fb.o obj-$(CONFIG_FB_SM501) += sm501fb.o obj-$(CONFIG_FB_XILINX) += xilinxfb.o obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o -obj-$(CONFIG_FB_SH7343VOU) += sh7343_voufb.o obj-$(CONFIG_FB_OMAP) += omap/ obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o obj-$(CONFIG_FB_CARMINE) += carminefb.o -- cgit v1.2.3 From 905a09d57afcc49511de18a95605c11ad9c88649 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 6 Jun 2008 16:34:03 +0800 Subject: [ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann Signed-off-by: Lennert Buytenhek Signed-off-by: Eric Miao Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 8 ++ arch/arm/mm/cache-xsc3l2.c | 182 +++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mm/proc-xsc3.S | 22 ------ 3 files changed, 190 insertions(+), 22 deletions(-) create mode 100644 arch/arm/mm/cache-xsc3l2.c diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 399d1d66bf93..ed15f876c725 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -742,3 +742,11 @@ config CACHE_L2X0 select OUTER_CACHE help This option enables the L2x0 PrimeCell. + +config CACHE_XSC3L2 + bool "Enable the L2 cache on XScale3" + depends on CPU_XSC3 + default y + select OUTER_CACHE + help + This option enables the L2 cache on XScale3. diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c new file mode 100644 index 000000000000..158bd96763d3 --- /dev/null +++ b/arch/arm/mm/cache-xsc3l2.c @@ -0,0 +1,182 @@ +/* + * arch/arm/mm/cache-xsc3l2.c - XScale3 L2 cache controller support + * + * Copyright (C) 2007 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include + +#include +#include +#include + +#define CR_L2 (1 << 26) + +#define CACHE_LINE_SIZE 32 +#define CACHE_LINE_SHIFT 5 +#define CACHE_WAY_PER_SET 8 + +#define CACHE_WAY_SIZE(l2ctype) (8192 << (((l2ctype) >> 8) & 0xf)) +#define CACHE_SET_SIZE(l2ctype) (CACHE_WAY_SIZE(l2ctype) >> CACHE_LINE_SHIFT) + +static inline int xsc3_l2_present(void) +{ + unsigned long l2ctype; + + __asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype)); + + return !!(l2ctype & 0xf8); +} + +static inline void xsc3_l2_clean_mva(unsigned long addr) +{ + __asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr)); +} + +static inline void xsc3_l2_clean_pa(unsigned long addr) +{ + xsc3_l2_clean_mva(__phys_to_virt(addr)); +} + +static inline void xsc3_l2_inv_mva(unsigned long addr) +{ + __asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr)); +} + +static inline void xsc3_l2_inv_pa(unsigned long addr) +{ + xsc3_l2_inv_mva(__phys_to_virt(addr)); +} + +static inline void xsc3_l2_inv_all(void) +{ + unsigned long l2ctype, set_way; + int set, way; + + __asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype)); + + for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) { + for (way = 0; way < CACHE_WAY_PER_SET; way++) { + set_way = (way << 29) | (set << 5); + __asm__("mcr p15, 1, %0, c7, c11, 2" : : "r"(set_way)); + } + } + + dsb(); +} + +static void xsc3_l2_inv_range(unsigned long start, unsigned long end) +{ + if (start == 0 && end == -1ul) { + xsc3_l2_inv_all(); + return; + } + + /* + * Clean and invalidate partial first cache line. + */ + if (start & (CACHE_LINE_SIZE - 1)) { + xsc3_l2_clean_pa(start & ~(CACHE_LINE_SIZE - 1)); + xsc3_l2_inv_pa(start & ~(CACHE_LINE_SIZE - 1)); + start = (start | (CACHE_LINE_SIZE - 1)) + 1; + } + + /* + * Clean and invalidate partial last cache line. + */ + if (end & (CACHE_LINE_SIZE - 1)) { + xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1)); + xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1)); + end &= ~(CACHE_LINE_SIZE - 1); + } + + /* + * Invalidate all full cache lines between 'start' and 'end'. + */ + while (start != end) { + xsc3_l2_inv_pa(start); + start += CACHE_LINE_SIZE; + } + + dsb(); +} + +static void xsc3_l2_clean_range(unsigned long start, unsigned long end) +{ + start &= ~(CACHE_LINE_SIZE - 1); + while (start < end) { + xsc3_l2_clean_pa(start); + start += CACHE_LINE_SIZE; + } + + dsb(); +} + +/* + * optimize L2 flush all operation by set/way format + */ +static inline void xsc3_l2_flush_all(void) +{ + unsigned long l2ctype, set_way; + int set, way; + + __asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype)); + + for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) { + for (way = 0; way < CACHE_WAY_PER_SET; way++) { + set_way = (way << 29) | (set << 5); + __asm__("mcr p15, 1, %0, c7, c15, 2" : : "r"(set_way)); + } + } + + dsb(); +} + +static void xsc3_l2_flush_range(unsigned long start, unsigned long end) +{ + if (start == 0 && end == -1ul) { + xsc3_l2_flush_all(); + return; + } + + start &= ~(CACHE_LINE_SIZE - 1); + while (start < end) { + xsc3_l2_clean_pa(start); + xsc3_l2_inv_pa(start); + start += CACHE_LINE_SIZE; + } + + dsb(); +} + +static int __init xsc3_l2_init(void) +{ + if (!cpu_is_xsc3() || !xsc3_l2_present()) + return 0; + + if (!(get_cr() & CR_L2)) { + pr_info("XScale3 L2 cache enabled.\n"); + adjust_cr(CR_L2, CR_L2); + xsc3_l2_inv_all(); + } + + outer_cache.inv_range = xsc3_l2_inv_range; + outer_cache.clean_range = xsc3_l2_clean_range; + outer_cache.flush_range = xsc3_l2_flush_range; + + return 0; +} +core_initcall(xsc3_l2_init); diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 3533741a76f6..6ff53c24510f 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -51,11 +51,6 @@ */ #define CACHESIZE 32768 -/* - * Run with L2 enabled. - */ -#define L2_CACHE_ENABLE 1 - /* * This macro is used to wait for a CP15 write and is needed when we * have to ensure that the last operation to the coprocessor was @@ -265,12 +260,9 @@ ENTRY(xsc3_dma_inv_range) tst r0, #CACHELINESIZE - 1 bic r0, r0, #CACHELINESIZE - 1 mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D line - mcrne p15, 1, r0, c7, c11, 1 @ clean L2 line tst r1, #CACHELINESIZE - 1 mcrne p15, 0, r1, c7, c10, 1 @ clean L1 D line - mcrne p15, 1, r1, c7, c11, 1 @ clean L2 line 1: mcr p15, 0, r0, c7, c6, 1 @ invalidate L1 D line - mcr p15, 1, r0, c7, c7, 1 @ invalidate L2 line add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b @@ -288,7 +280,6 @@ ENTRY(xsc3_dma_inv_range) ENTRY(xsc3_dma_clean_range) bic r0, r0, #CACHELINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line - mcr p15, 1, r0, c7, c11, 1 @ clean L2 line add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b @@ -306,8 +297,6 @@ ENTRY(xsc3_dma_clean_range) ENTRY(xsc3_dma_flush_range) bic r0, r0, #CACHELINESIZE - 1 1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line - mcr p15, 1, r0, c7, c11, 1 @ clean L2 line - mcr p15, 1, r0, c7, c7, 1 @ invalidate L2 line add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b @@ -347,9 +336,7 @@ ENTRY(cpu_xsc3_switch_mm) mcr p15, 0, ip, c7, c5, 0 @ invalidate L1 I cache and BTB mcr p15, 0, ip, c7, c10, 4 @ data write barrier mcr p15, 0, ip, c7, c5, 4 @ prefetch flush -#ifdef L2_CACHE_ENABLE orr r0, r0, #0x18 @ cache the page table in L2 -#endif mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs cpwait_ret lr, ip @@ -378,12 +365,10 @@ ENTRY(cpu_xsc3_set_pte_ext) orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w @ combined with user -> user r/w -#if L2_CACHE_ENABLE @ If it's cacheable, it needs to be in L2 also. eor ip, r1, #L_PTE_CACHEABLE tst ip, #L_PTE_CACHEABLE orreq r2, r2, #PTE_EXT_TEX(0x5) -#endif tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young? movne r2, #0 @ no -> fault @@ -408,9 +393,7 @@ __xsc3_setup: mcr p15, 0, ip, c7, c10, 4 @ data write barrier mcr p15, 0, ip, c7, c5, 4 @ prefetch flush mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs -#if L2_CACHE_ENABLE orr r4, r4, #0x18 @ cache the page table in L2 -#endif mcr p15, 0, r4, c2, c0, 0 @ load page table pointer mov r0, #0 @ don't allow CP access @@ -418,9 +401,7 @@ __xsc3_setup: mrc p15, 0, r0, c1, c0, 1 @ get auxiliary control reg and r0, r0, #2 @ preserve bit P bit setting -#if L2_CACHE_ENABLE orr r0, r0, #(1 << 10) @ enable L2 for LLR cache -#endif mcr p15, 0, r0, c1, c0, 1 @ set auxiliary control reg adr r5, xsc3_crval @@ -429,9 +410,6 @@ __xsc3_setup: bic r0, r0, r5 @ ..V. ..R. .... ..A. orr r0, r0, r6 @ ..VI Z..S .... .C.M (mmu) @ ...I Z..S .... .... (uc) -#if L2_CACHE_ENABLE - orr r0, r0, #0x04000000 @ L2 enable -#endif mov pc, lr .size __xsc3_setup, . - __xsc3_setup -- cgit v1.2.3 From f15cbe6f1a4b4d9df59142fc8e4abb973302cf44 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 08:09:44 +0900 Subject: sh: migrate to arch/sh/include/ This follows the sparc changes a439fe51a1f8eb087c22dd24d69cebae4a3addac. Most of the moving about was done with Sam's directions at: http://marc.info/?l=linux-sh&m=121724823706062&w=2 with subsequent hacking and fixups entirely my fault. Signed-off-by: Sam Ravnborg Signed-off-by: Paul Mundt --- arch/sh/Makefile | 61 +-- arch/sh/boards/cayman/irq.c | 2 +- arch/sh/boards/cayman/setup.c | 2 +- arch/sh/boards/dreamcast/irq.c | 2 +- arch/sh/boards/dreamcast/setup.c | 4 +- arch/sh/boards/hp6xx/pm.c | 2 +- arch/sh/boards/hp6xx/pm_wakeup.S | 2 +- arch/sh/boards/hp6xx/setup.c | 2 +- arch/sh/boards/landisk/gio.c | 4 +- arch/sh/boards/landisk/irq.c | 2 +- arch/sh/boards/landisk/psw.c | 2 +- arch/sh/boards/landisk/setup.c | 2 +- arch/sh/boards/renesas/r7780rp/psw.c | 2 +- arch/sh/boards/se/7343/io.c | 2 +- arch/sh/boards/se/7343/setup.c | 4 +- arch/sh/boards/sh03/setup.c | 4 +- arch/sh/boards/snapgear/setup.c | 2 +- arch/sh/boot/compressed/head_64.S | 4 +- arch/sh/drivers/dma/dma-g2.c | 4 +- arch/sh/drivers/dma/dma-pvr2.c | 4 +- arch/sh/drivers/dma/dma-sh.c | 2 +- arch/sh/drivers/dma/dma-sh.h | 2 +- arch/sh/drivers/pci/fixups-dreamcast.c | 2 +- arch/sh/drivers/pci/ops-cayman.c | 2 +- arch/sh/drivers/pci/ops-dreamcast.c | 2 +- arch/sh/drivers/pci/pci-sh5.c | 2 +- arch/sh/include/asm/.gitignore | 1 + arch/sh/include/asm/Kbuild | 8 + arch/sh/include/asm/a.out.h | 20 + arch/sh/include/asm/adc.h | 13 + arch/sh/include/asm/addrspace.h | 53 +++ arch/sh/include/asm/atomic-grb.h | 169 ++++++++ arch/sh/include/asm/atomic-irq.h | 71 +++ arch/sh/include/asm/atomic-llsc.h | 107 +++++ arch/sh/include/asm/atomic.h | 89 ++++ arch/sh/include/asm/auxvec.h | 36 ++ arch/sh/include/asm/bitops-grb.h | 169 ++++++++ arch/sh/include/asm/bitops-irq.h | 91 ++++ arch/sh/include/asm/bitops.h | 103 +++++ arch/sh/include/asm/bug.h | 79 ++++ arch/sh/include/asm/bugs.h | 73 ++++ arch/sh/include/asm/byteorder.h | 70 +++ arch/sh/include/asm/cache.h | 51 +++ arch/sh/include/asm/cacheflush.h | 81 ++++ arch/sh/include/asm/checksum.h | 5 + arch/sh/include/asm/checksum_32.h | 215 +++++++++ arch/sh/include/asm/checksum_64.h | 78 ++++ arch/sh/include/asm/clock.h | 97 +++++ arch/sh/include/asm/cmpxchg-grb.h | 70 +++ arch/sh/include/asm/cmpxchg-irq.h | 40 ++ arch/sh/include/asm/cpu-features.h | 25 ++ arch/sh/include/asm/cputime.h | 6 + arch/sh/include/asm/current.h | 20 + arch/sh/include/asm/delay.h | 26 ++ arch/sh/include/asm/device.h | 12 + arch/sh/include/asm/div64.h | 1 + arch/sh/include/asm/dma-mapping.h | 192 +++++++++ arch/sh/include/asm/dma.h | 166 +++++++ arch/sh/include/asm/dmabrg.h | 23 + arch/sh/include/asm/edosk7705.h | 30 ++ arch/sh/include/asm/elf.h | 244 +++++++++++ arch/sh/include/asm/emergency-restart.h | 6 + arch/sh/include/asm/entry-macros.S | 33 ++ arch/sh/include/asm/errno.h | 6 + arch/sh/include/asm/fb.h | 19 + arch/sh/include/asm/fcntl.h | 1 + arch/sh/include/asm/fixmap.h | 117 +++++ arch/sh/include/asm/flat.h | 24 ++ arch/sh/include/asm/fpu.h | 55 +++ arch/sh/include/asm/freq.h | 18 + arch/sh/include/asm/futex-irq.h | 111 +++++ arch/sh/include/asm/futex.h | 77 ++++ arch/sh/include/asm/gpio.h | 19 + arch/sh/include/asm/hardirq.h | 16 + arch/sh/include/asm/hd64461.h | 250 +++++++++++ arch/sh/include/asm/hd64465/gpio.h | 46 ++ arch/sh/include/asm/hd64465/hd64465.h | 256 +++++++++++ arch/sh/include/asm/hd64465/io.h | 44 ++ arch/sh/include/asm/heartbeat.h | 17 + arch/sh/include/asm/hp6xx.h | 58 +++ arch/sh/include/asm/hugetlb.h | 92 ++++ arch/sh/include/asm/hw_irq.h | 123 ++++++ arch/sh/include/asm/i2c-sh7760.h | 22 + arch/sh/include/asm/ilsel.h | 45 ++ arch/sh/include/asm/io.h | 366 ++++++++++++++++ arch/sh/include/asm/io_generic.h | 49 +++ arch/sh/include/asm/io_trapped.h | 58 +++ arch/sh/include/asm/ioctl.h | 1 + arch/sh/include/asm/ioctls.h | 103 +++++ arch/sh/include/asm/ipcbuf.h | 29 ++ arch/sh/include/asm/irq.h | 57 +++ arch/sh/include/asm/irq_regs.h | 1 + arch/sh/include/asm/irqflags.h | 34 ++ arch/sh/include/asm/irqflags_32.h | 99 +++++ arch/sh/include/asm/irqflags_64.h | 85 ++++ arch/sh/include/asm/kdebug.h | 9 + arch/sh/include/asm/kexec.h | 62 +++ arch/sh/include/asm/kgdb.h | 69 +++ arch/sh/include/asm/kmap_types.h | 32 ++ arch/sh/include/asm/lboxre2.h | 27 ++ arch/sh/include/asm/linkage.h | 7 + arch/sh/include/asm/local.h | 7 + arch/sh/include/asm/machvec.h | 70 +++ arch/sh/include/asm/magicpanelr2.h | 67 +++ arch/sh/include/asm/mc146818rtc.h | 7 + arch/sh/include/asm/microdev.h | 80 ++++ arch/sh/include/asm/migor.h | 65 +++ arch/sh/include/asm/mman.h | 17 + arch/sh/include/asm/mmu.h | 76 ++++ arch/sh/include/asm/mmu_context.h | 185 ++++++++ arch/sh/include/asm/mmu_context_32.h | 47 ++ arch/sh/include/asm/mmu_context_64.h | 78 ++++ arch/sh/include/asm/mmzone.h | 48 +++ arch/sh/include/asm/module.h | 44 ++ arch/sh/include/asm/msgbuf.h | 31 ++ arch/sh/include/asm/mutex.h | 9 + arch/sh/include/asm/page.h | 183 ++++++++ arch/sh/include/asm/param.h | 22 + arch/sh/include/asm/parport.h | 16 + arch/sh/include/asm/pci.h | 144 +++++++ arch/sh/include/asm/percpu.h | 6 + arch/sh/include/asm/pgalloc.h | 96 +++++ arch/sh/include/asm/pgtable.h | 152 +++++++ arch/sh/include/asm/pgtable_32.h | 479 +++++++++++++++++++++ arch/sh/include/asm/pgtable_64.h | 314 ++++++++++++++ arch/sh/include/asm/pm.h | 17 + arch/sh/include/asm/poll.h | 1 + arch/sh/include/asm/posix_types.h | 13 + arch/sh/include/asm/posix_types_32.h | 122 ++++++ arch/sh/include/asm/posix_types_64.h | 131 ++++++ arch/sh/include/asm/processor.h | 66 +++ arch/sh/include/asm/processor_32.h | 216 ++++++++++ arch/sh/include/asm/processor_64.h | 275 ++++++++++++ arch/sh/include/asm/ptrace.h | 130 ++++++ arch/sh/include/asm/push-switch.h | 31 ++ arch/sh/include/asm/r7780rp.h | 198 +++++++++ arch/sh/include/asm/resource.h | 6 + arch/sh/include/asm/rtc.h | 16 + arch/sh/include/asm/rts7751r2d.h | 70 +++ arch/sh/include/asm/rwsem.h | 188 ++++++++ arch/sh/include/asm/scatterlist.h | 27 ++ arch/sh/include/asm/sdk7780.h | 81 ++++ arch/sh/include/asm/se.h | 99 +++++ arch/sh/include/asm/se7206.h | 13 + arch/sh/include/asm/se7343.h | 149 +++++++ arch/sh/include/asm/se7721.h | 70 +++ arch/sh/include/asm/se7722.h | 112 +++++ arch/sh/include/asm/se7751.h | 73 ++++ arch/sh/include/asm/se7780.h | 108 +++++ arch/sh/include/asm/sections.h | 11 + arch/sh/include/asm/segment.h | 34 ++ arch/sh/include/asm/sembuf.h | 25 ++ arch/sh/include/asm/serial.h | 36 ++ arch/sh/include/asm/setup.h | 27 ++ arch/sh/include/asm/sfp-machine.h | 84 ++++ arch/sh/include/asm/sh7760fb.h | 197 +++++++++ arch/sh/include/asm/sh7763rdp.h | 54 +++ arch/sh/include/asm/sh7785lcr.h | 55 +++ arch/sh/include/asm/sh_bios.h | 19 + arch/sh/include/asm/sh_keysc.h | 13 + arch/sh/include/asm/sh_mobile_lcdc.h | 66 +++ arch/sh/include/asm/shmbuf.h | 42 ++ arch/sh/include/asm/shmin.h | 9 + arch/sh/include/asm/shmparam.h | 22 + arch/sh/include/asm/sigcontext.h | 40 ++ arch/sh/include/asm/siginfo.h | 6 + arch/sh/include/asm/signal.h | 160 +++++++ arch/sh/include/asm/smc37c93x.h | 190 ++++++++ arch/sh/include/asm/smp.h | 50 +++ arch/sh/include/asm/snapgear.h | 71 +++ arch/sh/include/asm/socket.h | 57 +++ arch/sh/include/asm/sockios.h | 14 + arch/sh/include/asm/sparsemem.h | 16 + arch/sh/include/asm/spi.h | 13 + arch/sh/include/asm/spinlock.h | 223 ++++++++++ arch/sh/include/asm/spinlock_types.h | 21 + arch/sh/include/asm/stat.h | 138 ++++++ arch/sh/include/asm/statfs.h | 6 + arch/sh/include/asm/string.h | 5 + arch/sh/include/asm/string_32.h | 131 ++++++ arch/sh/include/asm/string_64.h | 17 + arch/sh/include/asm/system.h | 190 ++++++++ arch/sh/include/asm/system_32.h | 102 +++++ arch/sh/include/asm/system_64.h | 40 ++ arch/sh/include/asm/systemh7751.h | 71 +++ arch/sh/include/asm/termbits.h | 198 +++++++++ arch/sh/include/asm/termios.h | 90 ++++ arch/sh/include/asm/thread_info.h | 141 ++++++ arch/sh/include/asm/timer.h | 44 ++ arch/sh/include/asm/timex.h | 18 + arch/sh/include/asm/titan.h | 17 + arch/sh/include/asm/tlb.h | 27 ++ arch/sh/include/asm/tlb_64.h | 77 ++++ arch/sh/include/asm/tlbflush.h | 49 +++ arch/sh/include/asm/topology.h | 47 ++ arch/sh/include/asm/types.h | 35 ++ arch/sh/include/asm/uaccess.h | 256 +++++++++++ arch/sh/include/asm/uaccess_32.h | 249 +++++++++++ arch/sh/include/asm/uaccess_64.h | 79 ++++ arch/sh/include/asm/ubc.h | 64 +++ arch/sh/include/asm/ucontext.h | 12 + arch/sh/include/asm/unaligned.h | 19 + arch/sh/include/asm/unistd.h | 13 + arch/sh/include/asm/unistd_32.h | 384 +++++++++++++++++ arch/sh/include/asm/unistd_64.h | 423 ++++++++++++++++++ arch/sh/include/asm/user.h | 67 +++ arch/sh/include/asm/vga.h | 6 + arch/sh/include/asm/watchdog.h | 107 +++++ arch/sh/include/asm/xor.h | 1 + arch/sh/include/cpu-sh2/cpu/addrspace.h | 19 + arch/sh/include/cpu-sh2/cpu/cache.h | 41 ++ arch/sh/include/cpu-sh2/cpu/cacheflush.h | 44 ++ arch/sh/include/cpu-sh2/cpu/dma.h | 23 + arch/sh/include/cpu-sh2/cpu/freq.h | 18 + arch/sh/include/cpu-sh2/cpu/mmu_context.h | 16 + arch/sh/include/cpu-sh2/cpu/rtc.h | 8 + arch/sh/include/cpu-sh2/cpu/sigcontext.h | 17 + arch/sh/include/cpu-sh2/cpu/timer.h | 6 + arch/sh/include/cpu-sh2/cpu/ubc.h | 32 ++ arch/sh/include/cpu-sh2/cpu/watchdog.h | 69 +++ arch/sh/include/cpu-sh2a/cpu/addrspace.h | 10 + arch/sh/include/cpu-sh2a/cpu/cache.h | 40 ++ arch/sh/include/cpu-sh2a/cpu/cacheflush.h | 44 ++ arch/sh/include/cpu-sh2a/cpu/dma.h | 23 + arch/sh/include/cpu-sh2a/cpu/freq.h | 16 + arch/sh/include/cpu-sh2a/cpu/mmu_context.h | 16 + arch/sh/include/cpu-sh2a/cpu/rtc.h | 8 + arch/sh/include/cpu-sh2a/cpu/timer.h | 6 + arch/sh/include/cpu-sh2a/cpu/ubc.h | 32 ++ arch/sh/include/cpu-sh2a/cpu/watchdog.h | 69 +++ arch/sh/include/cpu-sh3/cpu/adc.h | 28 ++ arch/sh/include/cpu-sh3/cpu/addrspace.h | 19 + arch/sh/include/cpu-sh3/cpu/cache.h | 43 ++ arch/sh/include/cpu-sh3/cpu/cacheflush.h | 70 +++ arch/sh/include/cpu-sh3/cpu/dac.h | 41 ++ arch/sh/include/cpu-sh3/cpu/dma.h | 51 +++ arch/sh/include/cpu-sh3/cpu/freq.h | 27 ++ arch/sh/include/cpu-sh3/cpu/gpio.h | 67 +++ arch/sh/include/cpu-sh3/cpu/mmu_context.h | 44 ++ arch/sh/include/cpu-sh3/cpu/rtc.h | 8 + arch/sh/include/cpu-sh3/cpu/sigcontext.h | 17 + arch/sh/include/cpu-sh3/cpu/timer.h | 67 +++ arch/sh/include/cpu-sh3/cpu/ubc.h | 42 ++ arch/sh/include/cpu-sh3/cpu/watchdog.h | 25 ++ arch/sh/include/cpu-sh4/cpu/addrspace.h | 35 ++ arch/sh/include/cpu-sh4/cpu/cache.h | 42 ++ arch/sh/include/cpu-sh4/cpu/cacheflush.h | 43 ++ arch/sh/include/cpu-sh4/cpu/dma-sh7780.h | 39 ++ arch/sh/include/cpu-sh4/cpu/dma.h | 65 +++ arch/sh/include/cpu-sh4/cpu/fpu.h | 32 ++ arch/sh/include/cpu-sh4/cpu/freq.h | 44 ++ arch/sh/include/cpu-sh4/cpu/mmu_context.h | 63 +++ arch/sh/include/cpu-sh4/cpu/rtc.h | 13 + arch/sh/include/cpu-sh4/cpu/sigcontext.h | 24 ++ arch/sh/include/cpu-sh4/cpu/sq.h | 35 ++ arch/sh/include/cpu-sh4/cpu/timer.h | 60 +++ arch/sh/include/cpu-sh4/cpu/ubc.h | 64 +++ arch/sh/include/cpu-sh4/cpu/watchdog.h | 25 ++ arch/sh/include/cpu-sh5/cpu/addrspace.h | 11 + arch/sh/include/cpu-sh5/cpu/cache.h | 97 +++++ arch/sh/include/cpu-sh5/cpu/cacheflush.h | 33 ++ arch/sh/include/cpu-sh5/cpu/dma.h | 6 + arch/sh/include/cpu-sh5/cpu/irq.h | 117 +++++ arch/sh/include/cpu-sh5/cpu/mmu_context.h | 21 + arch/sh/include/cpu-sh5/cpu/registers.h | 106 +++++ arch/sh/include/cpu-sh5/cpu/rtc.h | 8 + arch/sh/include/cpu-sh5/cpu/timer.h | 4 + arch/sh/include/mach-dreamcast/mach/dma.h | 34 ++ arch/sh/include/mach-dreamcast/mach/maple.h | 37 ++ arch/sh/include/mach-dreamcast/mach/pci.h | 25 ++ arch/sh/include/mach-dreamcast/mach/sysasic.h | 43 ++ arch/sh/include/mach-landisk/mach/gio.h | 37 ++ arch/sh/include/mach-landisk/mach/iodata_landisk.h | 42 ++ arch/sh/include/mach-sh03/mach/io.h | 25 ++ arch/sh/include/mach-sh03/mach/sh03.h | 18 + arch/sh/kernel/cpu/irq/intc-sh5.c | 2 +- arch/sh/kernel/cpu/sh2/entry.S | 2 +- arch/sh/kernel/cpu/sh2a/entry.S | 2 +- arch/sh/kernel/cpu/sh3/entry.S | 2 +- arch/sh/kernel/cpu/sh4/fpu.c | 2 +- arch/sh/kernel/cpu/sh4/softfloat.c | 2 +- arch/sh/kernel/cpu/sh4/sq.c | 2 +- arch/sh/kernel/cpu/sh5/entry.S | 2 +- arch/sh/kernel/head_64.S | 4 +- arch/sh/kernel/irq.c | 2 +- arch/sh/kernel/time_64.c | 4 +- arch/sh/lib64/panic.c | 2 +- arch/sh/mm/fault_64.c | 2 +- arch/sh/tools/Makefile | 4 +- include/asm-sh/.gitignore | 3 - include/asm-sh/Kbuild | 8 - include/asm-sh/a.out.h | 20 - include/asm-sh/adc.h | 13 - include/asm-sh/addrspace.h | 53 --- include/asm-sh/atomic-grb.h | 169 -------- include/asm-sh/atomic-irq.h | 71 --- include/asm-sh/atomic-llsc.h | 107 ----- include/asm-sh/atomic.h | 89 ---- include/asm-sh/auxvec.h | 36 -- include/asm-sh/bitops-grb.h | 169 -------- include/asm-sh/bitops-irq.h | 91 ---- include/asm-sh/bitops.h | 103 ----- include/asm-sh/bug.h | 79 ---- include/asm-sh/bugs.h | 73 ---- include/asm-sh/byteorder.h | 70 --- include/asm-sh/cache.h | 51 --- include/asm-sh/cacheflush.h | 81 ---- include/asm-sh/checksum.h | 5 - include/asm-sh/checksum_32.h | 215 --------- include/asm-sh/checksum_64.h | 78 ---- include/asm-sh/clock.h | 97 ----- include/asm-sh/cmpxchg-grb.h | 70 --- include/asm-sh/cmpxchg-irq.h | 40 -- include/asm-sh/cpu-features.h | 25 -- include/asm-sh/cpu-sh2/addrspace.h | 19 - include/asm-sh/cpu-sh2/cache.h | 41 -- include/asm-sh/cpu-sh2/cacheflush.h | 44 -- include/asm-sh/cpu-sh2/dma.h | 23 - include/asm-sh/cpu-sh2/freq.h | 18 - include/asm-sh/cpu-sh2/mmu_context.h | 16 - include/asm-sh/cpu-sh2/rtc.h | 8 - include/asm-sh/cpu-sh2/sigcontext.h | 17 - include/asm-sh/cpu-sh2/timer.h | 6 - include/asm-sh/cpu-sh2/ubc.h | 32 -- include/asm-sh/cpu-sh2/watchdog.h | 69 --- include/asm-sh/cpu-sh2a/addrspace.h | 10 - include/asm-sh/cpu-sh2a/cache.h | 40 -- include/asm-sh/cpu-sh2a/cacheflush.h | 1 - include/asm-sh/cpu-sh2a/dma.h | 1 - include/asm-sh/cpu-sh2a/freq.h | 16 - include/asm-sh/cpu-sh2a/mmu_context.h | 1 - include/asm-sh/cpu-sh2a/rtc.h | 8 - include/asm-sh/cpu-sh2a/timer.h | 1 - include/asm-sh/cpu-sh2a/ubc.h | 1 - include/asm-sh/cpu-sh2a/watchdog.h | 1 - include/asm-sh/cpu-sh3/adc.h | 28 -- include/asm-sh/cpu-sh3/addrspace.h | 19 - include/asm-sh/cpu-sh3/cache.h | 43 -- include/asm-sh/cpu-sh3/cacheflush.h | 70 --- include/asm-sh/cpu-sh3/dac.h | 41 -- include/asm-sh/cpu-sh3/dma.h | 51 --- include/asm-sh/cpu-sh3/freq.h | 27 -- include/asm-sh/cpu-sh3/gpio.h | 67 --- include/asm-sh/cpu-sh3/mmu_context.h | 44 -- include/asm-sh/cpu-sh3/rtc.h | 8 - include/asm-sh/cpu-sh3/sigcontext.h | 17 - include/asm-sh/cpu-sh3/timer.h | 67 --- include/asm-sh/cpu-sh3/ubc.h | 42 -- include/asm-sh/cpu-sh3/watchdog.h | 25 -- include/asm-sh/cpu-sh4/addrspace.h | 35 -- include/asm-sh/cpu-sh4/cache.h | 42 -- include/asm-sh/cpu-sh4/cacheflush.h | 43 -- include/asm-sh/cpu-sh4/dma-sh7780.h | 39 -- include/asm-sh/cpu-sh4/dma.h | 65 --- include/asm-sh/cpu-sh4/fpu.h | 32 -- include/asm-sh/cpu-sh4/freq.h | 44 -- include/asm-sh/cpu-sh4/mmu_context.h | 63 --- include/asm-sh/cpu-sh4/rtc.h | 13 - include/asm-sh/cpu-sh4/sigcontext.h | 24 -- include/asm-sh/cpu-sh4/sq.h | 35 -- include/asm-sh/cpu-sh4/timer.h | 60 --- include/asm-sh/cpu-sh4/ubc.h | 64 --- include/asm-sh/cpu-sh4/watchdog.h | 25 -- include/asm-sh/cpu-sh5/addrspace.h | 11 - include/asm-sh/cpu-sh5/cache.h | 97 ----- include/asm-sh/cpu-sh5/cacheflush.h | 33 -- include/asm-sh/cpu-sh5/dma.h | 6 - include/asm-sh/cpu-sh5/irq.h | 117 ----- include/asm-sh/cpu-sh5/mmu_context.h | 21 - include/asm-sh/cpu-sh5/registers.h | 106 ----- include/asm-sh/cpu-sh5/rtc.h | 8 - include/asm-sh/cpu-sh5/timer.h | 4 - include/asm-sh/cputime.h | 6 - include/asm-sh/current.h | 20 - include/asm-sh/delay.h | 26 -- include/asm-sh/device.h | 12 - include/asm-sh/div64.h | 1 - include/asm-sh/dma-mapping.h | 192 --------- include/asm-sh/dma.h | 166 ------- include/asm-sh/dmabrg.h | 23 - include/asm-sh/dreamcast/dma.h | 34 -- include/asm-sh/dreamcast/maple.h | 37 -- include/asm-sh/dreamcast/pci.h | 25 -- include/asm-sh/dreamcast/sysasic.h | 43 -- include/asm-sh/edosk7705.h | 30 -- include/asm-sh/elf.h | 244 ----------- include/asm-sh/emergency-restart.h | 6 - include/asm-sh/entry-macros.S | 33 -- include/asm-sh/errno.h | 6 - include/asm-sh/fb.h | 19 - include/asm-sh/fcntl.h | 1 - include/asm-sh/fixmap.h | 117 ----- include/asm-sh/flat.h | 24 -- include/asm-sh/fpu.h | 55 --- include/asm-sh/freq.h | 18 - include/asm-sh/futex-irq.h | 111 ----- include/asm-sh/futex.h | 77 ---- include/asm-sh/gpio.h | 19 - include/asm-sh/hardirq.h | 16 - include/asm-sh/hd64461.h | 250 ----------- include/asm-sh/hd64465/gpio.h | 46 -- include/asm-sh/hd64465/hd64465.h | 256 ----------- include/asm-sh/hd64465/io.h | 44 -- include/asm-sh/heartbeat.h | 17 - include/asm-sh/hp6xx.h | 58 --- include/asm-sh/hugetlb.h | 92 ---- include/asm-sh/hw_irq.h | 123 ------ include/asm-sh/i2c-sh7760.h | 22 - include/asm-sh/ilsel.h | 45 -- include/asm-sh/io.h | 366 ---------------- include/asm-sh/io_generic.h | 49 --- include/asm-sh/io_trapped.h | 58 --- include/asm-sh/ioctl.h | 1 - include/asm-sh/ioctls.h | 103 ----- include/asm-sh/ipcbuf.h | 29 -- include/asm-sh/irq.h | 57 --- include/asm-sh/irq_regs.h | 1 - include/asm-sh/irqflags.h | 34 -- include/asm-sh/irqflags_32.h | 99 ----- include/asm-sh/irqflags_64.h | 85 ---- include/asm-sh/kdebug.h | 9 - include/asm-sh/kexec.h | 62 --- include/asm-sh/kgdb.h | 69 --- include/asm-sh/kmap_types.h | 32 -- include/asm-sh/landisk/gio.h | 37 -- include/asm-sh/landisk/iodata_landisk.h | 42 -- include/asm-sh/lboxre2.h | 27 -- include/asm-sh/linkage.h | 7 - include/asm-sh/local.h | 7 - include/asm-sh/machvec.h | 70 --- include/asm-sh/magicpanelr2.h | 67 --- include/asm-sh/mc146818rtc.h | 7 - include/asm-sh/microdev.h | 80 ---- include/asm-sh/migor.h | 65 --- include/asm-sh/mman.h | 17 - include/asm-sh/mmu.h | 76 ---- include/asm-sh/mmu_context.h | 185 -------- include/asm-sh/mmu_context_32.h | 47 -- include/asm-sh/mmu_context_64.h | 78 ---- include/asm-sh/mmzone.h | 48 --- include/asm-sh/module.h | 44 -- include/asm-sh/msgbuf.h | 31 -- include/asm-sh/mutex.h | 9 - include/asm-sh/page.h | 183 -------- include/asm-sh/param.h | 22 - include/asm-sh/parport.h | 16 - include/asm-sh/pci.h | 144 ------- include/asm-sh/percpu.h | 6 - include/asm-sh/pgalloc.h | 96 ----- include/asm-sh/pgtable.h | 152 ------- include/asm-sh/pgtable_32.h | 479 --------------------- include/asm-sh/pgtable_64.h | 314 -------------- include/asm-sh/pm.h | 17 - include/asm-sh/poll.h | 1 - include/asm-sh/posix_types.h | 13 - include/asm-sh/posix_types_32.h | 122 ------ include/asm-sh/posix_types_64.h | 131 ------ include/asm-sh/processor.h | 66 --- include/asm-sh/processor_32.h | 216 ---------- include/asm-sh/processor_64.h | 275 ------------ include/asm-sh/ptrace.h | 130 ------ include/asm-sh/push-switch.h | 31 -- include/asm-sh/r7780rp.h | 198 --------- include/asm-sh/resource.h | 6 - include/asm-sh/rtc.h | 16 - include/asm-sh/rts7751r2d.h | 70 --- include/asm-sh/rwsem.h | 188 -------- include/asm-sh/scatterlist.h | 27 -- include/asm-sh/sdk7780.h | 81 ---- include/asm-sh/se.h | 99 ----- include/asm-sh/se7206.h | 13 - include/asm-sh/se7343.h | 149 ------- include/asm-sh/se7721.h | 70 --- include/asm-sh/se7722.h | 112 ----- include/asm-sh/se7751.h | 73 ---- include/asm-sh/se7780.h | 108 ----- include/asm-sh/sections.h | 11 - include/asm-sh/segment.h | 34 -- include/asm-sh/sembuf.h | 25 -- include/asm-sh/serial.h | 36 -- include/asm-sh/setup.h | 27 -- include/asm-sh/sfp-machine.h | 84 ---- include/asm-sh/sh03/io.h | 25 -- include/asm-sh/sh03/sh03.h | 18 - include/asm-sh/sh7760fb.h | 197 --------- include/asm-sh/sh7763rdp.h | 54 --- include/asm-sh/sh7785lcr.h | 55 --- include/asm-sh/sh_bios.h | 19 - include/asm-sh/sh_keysc.h | 13 - include/asm-sh/sh_mobile_lcdc.h | 66 --- include/asm-sh/shmbuf.h | 42 -- include/asm-sh/shmin.h | 9 - include/asm-sh/shmparam.h | 22 - include/asm-sh/sigcontext.h | 40 -- include/asm-sh/siginfo.h | 6 - include/asm-sh/signal.h | 160 ------- include/asm-sh/smc37c93x.h | 190 -------- include/asm-sh/smp.h | 50 --- include/asm-sh/snapgear.h | 71 --- include/asm-sh/socket.h | 57 --- include/asm-sh/sockios.h | 14 - include/asm-sh/sparsemem.h | 16 - include/asm-sh/spi.h | 13 - include/asm-sh/spinlock.h | 223 ---------- include/asm-sh/spinlock_types.h | 21 - include/asm-sh/stat.h | 138 ------ include/asm-sh/statfs.h | 6 - include/asm-sh/string.h | 5 - include/asm-sh/string_32.h | 131 ------ include/asm-sh/string_64.h | 17 - include/asm-sh/system.h | 190 -------- include/asm-sh/system_32.h | 102 ----- include/asm-sh/system_64.h | 40 -- include/asm-sh/systemh7751.h | 71 --- include/asm-sh/termbits.h | 198 --------- include/asm-sh/termios.h | 90 ---- include/asm-sh/thread_info.h | 141 ------ include/asm-sh/timer.h | 44 -- include/asm-sh/timex.h | 18 - include/asm-sh/titan.h | 17 - include/asm-sh/tlb.h | 27 -- include/asm-sh/tlb_64.h | 77 ---- include/asm-sh/tlbflush.h | 49 --- include/asm-sh/topology.h | 47 -- include/asm-sh/types.h | 35 -- include/asm-sh/uaccess.h | 256 ----------- include/asm-sh/uaccess_32.h | 249 ----------- include/asm-sh/uaccess_64.h | 79 ---- include/asm-sh/ubc.h | 64 --- include/asm-sh/ucontext.h | 12 - include/asm-sh/unaligned.h | 19 - include/asm-sh/unistd.h | 13 - include/asm-sh/unistd_32.h | 384 ----------------- include/asm-sh/unistd_64.h | 423 ------------------ include/asm-sh/user.h | 67 --- include/asm-sh/vga.h | 6 - include/asm-sh/watchdog.h | 107 ----- include/asm-sh/xor.h | 1 - sound/sh/aica.c | 2 +- 539 files changed, 16622 insertions(+), 16485 deletions(-) create mode 100644 arch/sh/include/asm/.gitignore create mode 100644 arch/sh/include/asm/Kbuild create mode 100644 arch/sh/include/asm/a.out.h create mode 100644 arch/sh/include/asm/adc.h create mode 100644 arch/sh/include/asm/addrspace.h create mode 100644 arch/sh/include/asm/atomic-grb.h create mode 100644 arch/sh/include/asm/atomic-irq.h create mode 100644 arch/sh/include/asm/atomic-llsc.h create mode 100644 arch/sh/include/asm/atomic.h create mode 100644 arch/sh/include/asm/auxvec.h create mode 100644 arch/sh/include/asm/bitops-grb.h create mode 100644 arch/sh/include/asm/bitops-irq.h create mode 100644 arch/sh/include/asm/bitops.h create mode 100644 arch/sh/include/asm/bug.h create mode 100644 arch/sh/include/asm/bugs.h create mode 100644 arch/sh/include/asm/byteorder.h create mode 100644 arch/sh/include/asm/cache.h create mode 100644 arch/sh/include/asm/cacheflush.h create mode 100644 arch/sh/include/asm/checksum.h create mode 100644 arch/sh/include/asm/checksum_32.h create mode 100644 arch/sh/include/asm/checksum_64.h create mode 100644 arch/sh/include/asm/clock.h create mode 100644 arch/sh/include/asm/cmpxchg-grb.h create mode 100644 arch/sh/include/asm/cmpxchg-irq.h create mode 100644 arch/sh/include/asm/cpu-features.h create mode 100644 arch/sh/include/asm/cputime.h create mode 100644 arch/sh/include/asm/current.h create mode 100644 arch/sh/include/asm/delay.h create mode 100644 arch/sh/include/asm/device.h create mode 100644 arch/sh/include/asm/div64.h create mode 100644 arch/sh/include/asm/dma-mapping.h create mode 100644 arch/sh/include/asm/dma.h create mode 100644 arch/sh/include/asm/dmabrg.h create mode 100644 arch/sh/include/asm/edosk7705.h create mode 100644 arch/sh/include/asm/elf.h create mode 100644 arch/sh/include/asm/emergency-restart.h create mode 100644 arch/sh/include/asm/entry-macros.S create mode 100644 arch/sh/include/asm/errno.h create mode 100644 arch/sh/include/asm/fb.h create mode 100644 arch/sh/include/asm/fcntl.h create mode 100644 arch/sh/include/asm/fixmap.h create mode 100644 arch/sh/include/asm/flat.h create mode 100644 arch/sh/include/asm/fpu.h create mode 100644 arch/sh/include/asm/freq.h create mode 100644 arch/sh/include/asm/futex-irq.h create mode 100644 arch/sh/include/asm/futex.h create mode 100644 arch/sh/include/asm/gpio.h create mode 100644 arch/sh/include/asm/hardirq.h create mode 100644 arch/sh/include/asm/hd64461.h create mode 100644 arch/sh/include/asm/hd64465/gpio.h create mode 100644 arch/sh/include/asm/hd64465/hd64465.h create mode 100644 arch/sh/include/asm/hd64465/io.h create mode 100644 arch/sh/include/asm/heartbeat.h create mode 100644 arch/sh/include/asm/hp6xx.h create mode 100644 arch/sh/include/asm/hugetlb.h create mode 100644 arch/sh/include/asm/hw_irq.h create mode 100644 arch/sh/include/asm/i2c-sh7760.h create mode 100644 arch/sh/include/asm/ilsel.h create mode 100644 arch/sh/include/asm/io.h create mode 100644 arch/sh/include/asm/io_generic.h create mode 100644 arch/sh/include/asm/io_trapped.h create mode 100644 arch/sh/include/asm/ioctl.h create mode 100644 arch/sh/include/asm/ioctls.h create mode 100644 arch/sh/include/asm/ipcbuf.h create mode 100644 arch/sh/include/asm/irq.h create mode 100644 arch/sh/include/asm/irq_regs.h create mode 100644 arch/sh/include/asm/irqflags.h create mode 100644 arch/sh/include/asm/irqflags_32.h create mode 100644 arch/sh/include/asm/irqflags_64.h create mode 100644 arch/sh/include/asm/kdebug.h create mode 100644 arch/sh/include/asm/kexec.h create mode 100644 arch/sh/include/asm/kgdb.h create mode 100644 arch/sh/include/asm/kmap_types.h create mode 100644 arch/sh/include/asm/lboxre2.h create mode 100644 arch/sh/include/asm/linkage.h create mode 100644 arch/sh/include/asm/local.h create mode 100644 arch/sh/include/asm/machvec.h create mode 100644 arch/sh/include/asm/magicpanelr2.h create mode 100644 arch/sh/include/asm/mc146818rtc.h create mode 100644 arch/sh/include/asm/microdev.h create mode 100644 arch/sh/include/asm/migor.h create mode 100644 arch/sh/include/asm/mman.h create mode 100644 arch/sh/include/asm/mmu.h create mode 100644 arch/sh/include/asm/mmu_context.h create mode 100644 arch/sh/include/asm/mmu_context_32.h create mode 100644 arch/sh/include/asm/mmu_context_64.h create mode 100644 arch/sh/include/asm/mmzone.h create mode 100644 arch/sh/include/asm/module.h create mode 100644 arch/sh/include/asm/msgbuf.h create mode 100644 arch/sh/include/asm/mutex.h create mode 100644 arch/sh/include/asm/page.h create mode 100644 arch/sh/include/asm/param.h create mode 100644 arch/sh/include/asm/parport.h create mode 100644 arch/sh/include/asm/pci.h create mode 100644 arch/sh/include/asm/percpu.h create mode 100644 arch/sh/include/asm/pgalloc.h create mode 100644 arch/sh/include/asm/pgtable.h create mode 100644 arch/sh/include/asm/pgtable_32.h create mode 100644 arch/sh/include/asm/pgtable_64.h create mode 100644 arch/sh/include/asm/pm.h create mode 100644 arch/sh/include/asm/poll.h create mode 100644 arch/sh/include/asm/posix_types.h create mode 100644 arch/sh/include/asm/posix_types_32.h create mode 100644 arch/sh/include/asm/posix_types_64.h create mode 100644 arch/sh/include/asm/processor.h create mode 100644 arch/sh/include/asm/processor_32.h create mode 100644 arch/sh/include/asm/processor_64.h create mode 100644 arch/sh/include/asm/ptrace.h create mode 100644 arch/sh/include/asm/push-switch.h create mode 100644 arch/sh/include/asm/r7780rp.h create mode 100644 arch/sh/include/asm/resource.h create mode 100644 arch/sh/include/asm/rtc.h create mode 100644 arch/sh/include/asm/rts7751r2d.h create mode 100644 arch/sh/include/asm/rwsem.h create mode 100644 arch/sh/include/asm/scatterlist.h create mode 100644 arch/sh/include/asm/sdk7780.h create mode 100644 arch/sh/include/asm/se.h create mode 100644 arch/sh/include/asm/se7206.h create mode 100644 arch/sh/include/asm/se7343.h create mode 100644 arch/sh/include/asm/se7721.h create mode 100644 arch/sh/include/asm/se7722.h create mode 100644 arch/sh/include/asm/se7751.h create mode 100644 arch/sh/include/asm/se7780.h create mode 100644 arch/sh/include/asm/sections.h create mode 100644 arch/sh/include/asm/segment.h create mode 100644 arch/sh/include/asm/sembuf.h create mode 100644 arch/sh/include/asm/serial.h create mode 100644 arch/sh/include/asm/setup.h create mode 100644 arch/sh/include/asm/sfp-machine.h create mode 100644 arch/sh/include/asm/sh7760fb.h create mode 100644 arch/sh/include/asm/sh7763rdp.h create mode 100644 arch/sh/include/asm/sh7785lcr.h create mode 100644 arch/sh/include/asm/sh_bios.h create mode 100644 arch/sh/include/asm/sh_keysc.h create mode 100644 arch/sh/include/asm/sh_mobile_lcdc.h create mode 100644 arch/sh/include/asm/shmbuf.h create mode 100644 arch/sh/include/asm/shmin.h create mode 100644 arch/sh/include/asm/shmparam.h create mode 100644 arch/sh/include/asm/sigcontext.h create mode 100644 arch/sh/include/asm/siginfo.h create mode 100644 arch/sh/include/asm/signal.h create mode 100644 arch/sh/include/asm/smc37c93x.h create mode 100644 arch/sh/include/asm/smp.h create mode 100644 arch/sh/include/asm/snapgear.h create mode 100644 arch/sh/include/asm/socket.h create mode 100644 arch/sh/include/asm/sockios.h create mode 100644 arch/sh/include/asm/sparsemem.h create mode 100644 arch/sh/include/asm/spi.h create mode 100644 arch/sh/include/asm/spinlock.h create mode 100644 arch/sh/include/asm/spinlock_types.h create mode 100644 arch/sh/include/asm/stat.h create mode 100644 arch/sh/include/asm/statfs.h create mode 100644 arch/sh/include/asm/string.h create mode 100644 arch/sh/include/asm/string_32.h create mode 100644 arch/sh/include/asm/string_64.h create mode 100644 arch/sh/include/asm/system.h create mode 100644 arch/sh/include/asm/system_32.h create mode 100644 arch/sh/include/asm/system_64.h create mode 100644 arch/sh/include/asm/systemh7751.h create mode 100644 arch/sh/include/asm/termbits.h create mode 100644 arch/sh/include/asm/termios.h create mode 100644 arch/sh/include/asm/thread_info.h create mode 100644 arch/sh/include/asm/timer.h create mode 100644 arch/sh/include/asm/timex.h create mode 100644 arch/sh/include/asm/titan.h create mode 100644 arch/sh/include/asm/tlb.h create mode 100644 arch/sh/include/asm/tlb_64.h create mode 100644 arch/sh/include/asm/tlbflush.h create mode 100644 arch/sh/include/asm/topology.h create mode 100644 arch/sh/include/asm/types.h create mode 100644 arch/sh/include/asm/uaccess.h create mode 100644 arch/sh/include/asm/uaccess_32.h create mode 100644 arch/sh/include/asm/uaccess_64.h create mode 100644 arch/sh/include/asm/ubc.h create mode 100644 arch/sh/include/asm/ucontext.h create mode 100644 arch/sh/include/asm/unaligned.h create mode 100644 arch/sh/include/asm/unistd.h create mode 100644 arch/sh/include/asm/unistd_32.h create mode 100644 arch/sh/include/asm/unistd_64.h create mode 100644 arch/sh/include/asm/user.h create mode 100644 arch/sh/include/asm/vga.h create mode 100644 arch/sh/include/asm/watchdog.h create mode 100644 arch/sh/include/asm/xor.h create mode 100644 arch/sh/include/cpu-sh2/cpu/addrspace.h create mode 100644 arch/sh/include/cpu-sh2/cpu/cache.h create mode 100644 arch/sh/include/cpu-sh2/cpu/cacheflush.h create mode 100644 arch/sh/include/cpu-sh2/cpu/dma.h create mode 100644 arch/sh/include/cpu-sh2/cpu/freq.h create mode 100644 arch/sh/include/cpu-sh2/cpu/mmu_context.h create mode 100644 arch/sh/include/cpu-sh2/cpu/rtc.h create mode 100644 arch/sh/include/cpu-sh2/cpu/sigcontext.h create mode 100644 arch/sh/include/cpu-sh2/cpu/timer.h create mode 100644 arch/sh/include/cpu-sh2/cpu/ubc.h create mode 100644 arch/sh/include/cpu-sh2/cpu/watchdog.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/addrspace.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/cache.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/cacheflush.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/dma.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/freq.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/mmu_context.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/rtc.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/timer.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/ubc.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/watchdog.h create mode 100644 arch/sh/include/cpu-sh3/cpu/adc.h create mode 100644 arch/sh/include/cpu-sh3/cpu/addrspace.h create mode 100644 arch/sh/include/cpu-sh3/cpu/cache.h create mode 100644 arch/sh/include/cpu-sh3/cpu/cacheflush.h create mode 100644 arch/sh/include/cpu-sh3/cpu/dac.h create mode 100644 arch/sh/include/cpu-sh3/cpu/dma.h create mode 100644 arch/sh/include/cpu-sh3/cpu/freq.h create mode 100644 arch/sh/include/cpu-sh3/cpu/gpio.h create mode 100644 arch/sh/include/cpu-sh3/cpu/mmu_context.h create mode 100644 arch/sh/include/cpu-sh3/cpu/rtc.h create mode 100644 arch/sh/include/cpu-sh3/cpu/sigcontext.h create mode 100644 arch/sh/include/cpu-sh3/cpu/timer.h create mode 100644 arch/sh/include/cpu-sh3/cpu/ubc.h create mode 100644 arch/sh/include/cpu-sh3/cpu/watchdog.h create mode 100644 arch/sh/include/cpu-sh4/cpu/addrspace.h create mode 100644 arch/sh/include/cpu-sh4/cpu/cache.h create mode 100644 arch/sh/include/cpu-sh4/cpu/cacheflush.h create mode 100644 arch/sh/include/cpu-sh4/cpu/dma-sh7780.h create mode 100644 arch/sh/include/cpu-sh4/cpu/dma.h create mode 100644 arch/sh/include/cpu-sh4/cpu/fpu.h create mode 100644 arch/sh/include/cpu-sh4/cpu/freq.h create mode 100644 arch/sh/include/cpu-sh4/cpu/mmu_context.h create mode 100644 arch/sh/include/cpu-sh4/cpu/rtc.h create mode 100644 arch/sh/include/cpu-sh4/cpu/sigcontext.h create mode 100644 arch/sh/include/cpu-sh4/cpu/sq.h create mode 100644 arch/sh/include/cpu-sh4/cpu/timer.h create mode 100644 arch/sh/include/cpu-sh4/cpu/ubc.h create mode 100644 arch/sh/include/cpu-sh4/cpu/watchdog.h create mode 100644 arch/sh/include/cpu-sh5/cpu/addrspace.h create mode 100644 arch/sh/include/cpu-sh5/cpu/cache.h create mode 100644 arch/sh/include/cpu-sh5/cpu/cacheflush.h create mode 100644 arch/sh/include/cpu-sh5/cpu/dma.h create mode 100644 arch/sh/include/cpu-sh5/cpu/irq.h create mode 100644 arch/sh/include/cpu-sh5/cpu/mmu_context.h create mode 100644 arch/sh/include/cpu-sh5/cpu/registers.h create mode 100644 arch/sh/include/cpu-sh5/cpu/rtc.h create mode 100644 arch/sh/include/cpu-sh5/cpu/timer.h create mode 100644 arch/sh/include/mach-dreamcast/mach/dma.h create mode 100644 arch/sh/include/mach-dreamcast/mach/maple.h create mode 100644 arch/sh/include/mach-dreamcast/mach/pci.h create mode 100644 arch/sh/include/mach-dreamcast/mach/sysasic.h create mode 100644 arch/sh/include/mach-landisk/mach/gio.h create mode 100644 arch/sh/include/mach-landisk/mach/iodata_landisk.h create mode 100644 arch/sh/include/mach-sh03/mach/io.h create mode 100644 arch/sh/include/mach-sh03/mach/sh03.h delete mode 100644 include/asm-sh/.gitignore delete mode 100644 include/asm-sh/Kbuild delete mode 100644 include/asm-sh/a.out.h delete mode 100644 include/asm-sh/adc.h delete mode 100644 include/asm-sh/addrspace.h delete mode 100644 include/asm-sh/atomic-grb.h delete mode 100644 include/asm-sh/atomic-irq.h delete mode 100644 include/asm-sh/atomic-llsc.h delete mode 100644 include/asm-sh/atomic.h delete mode 100644 include/asm-sh/auxvec.h delete mode 100644 include/asm-sh/bitops-grb.h delete mode 100644 include/asm-sh/bitops-irq.h delete mode 100644 include/asm-sh/bitops.h delete mode 100644 include/asm-sh/bug.h delete mode 100644 include/asm-sh/bugs.h delete mode 100644 include/asm-sh/byteorder.h delete mode 100644 include/asm-sh/cache.h delete mode 100644 include/asm-sh/cacheflush.h delete mode 100644 include/asm-sh/checksum.h delete mode 100644 include/asm-sh/checksum_32.h delete mode 100644 include/asm-sh/checksum_64.h delete mode 100644 include/asm-sh/clock.h delete mode 100644 include/asm-sh/cmpxchg-grb.h delete mode 100644 include/asm-sh/cmpxchg-irq.h delete mode 100644 include/asm-sh/cpu-features.h delete mode 100644 include/asm-sh/cpu-sh2/addrspace.h delete mode 100644 include/asm-sh/cpu-sh2/cache.h delete mode 100644 include/asm-sh/cpu-sh2/cacheflush.h delete mode 100644 include/asm-sh/cpu-sh2/dma.h delete mode 100644 include/asm-sh/cpu-sh2/freq.h delete mode 100644 include/asm-sh/cpu-sh2/mmu_context.h delete mode 100644 include/asm-sh/cpu-sh2/rtc.h delete mode 100644 include/asm-sh/cpu-sh2/sigcontext.h delete mode 100644 include/asm-sh/cpu-sh2/timer.h delete mode 100644 include/asm-sh/cpu-sh2/ubc.h delete mode 100644 include/asm-sh/cpu-sh2/watchdog.h delete mode 100644 include/asm-sh/cpu-sh2a/addrspace.h delete mode 100644 include/asm-sh/cpu-sh2a/cache.h delete mode 100644 include/asm-sh/cpu-sh2a/cacheflush.h delete mode 100644 include/asm-sh/cpu-sh2a/dma.h delete mode 100644 include/asm-sh/cpu-sh2a/freq.h delete mode 100644 include/asm-sh/cpu-sh2a/mmu_context.h delete mode 100644 include/asm-sh/cpu-sh2a/rtc.h delete mode 100644 include/asm-sh/cpu-sh2a/timer.h delete mode 100644 include/asm-sh/cpu-sh2a/ubc.h delete mode 100644 include/asm-sh/cpu-sh2a/watchdog.h delete mode 100644 include/asm-sh/cpu-sh3/adc.h delete mode 100644 include/asm-sh/cpu-sh3/addrspace.h delete mode 100644 include/asm-sh/cpu-sh3/cache.h delete mode 100644 include/asm-sh/cpu-sh3/cacheflush.h delete mode 100644 include/asm-sh/cpu-sh3/dac.h delete mode 100644 include/asm-sh/cpu-sh3/dma.h delete mode 100644 include/asm-sh/cpu-sh3/freq.h delete mode 100644 include/asm-sh/cpu-sh3/gpio.h delete mode 100644 include/asm-sh/cpu-sh3/mmu_context.h delete mode 100644 include/asm-sh/cpu-sh3/rtc.h delete mode 100644 include/asm-sh/cpu-sh3/sigcontext.h delete mode 100644 include/asm-sh/cpu-sh3/timer.h delete mode 100644 include/asm-sh/cpu-sh3/ubc.h delete mode 100644 include/asm-sh/cpu-sh3/watchdog.h delete mode 100644 include/asm-sh/cpu-sh4/addrspace.h delete mode 100644 include/asm-sh/cpu-sh4/cache.h delete mode 100644 include/asm-sh/cpu-sh4/cacheflush.h delete mode 100644 include/asm-sh/cpu-sh4/dma-sh7780.h delete mode 100644 include/asm-sh/cpu-sh4/dma.h delete mode 100644 include/asm-sh/cpu-sh4/fpu.h delete mode 100644 include/asm-sh/cpu-sh4/freq.h delete mode 100644 include/asm-sh/cpu-sh4/mmu_context.h delete mode 100644 include/asm-sh/cpu-sh4/rtc.h delete mode 100644 include/asm-sh/cpu-sh4/sigcontext.h delete mode 100644 include/asm-sh/cpu-sh4/sq.h delete mode 100644 include/asm-sh/cpu-sh4/timer.h delete mode 100644 include/asm-sh/cpu-sh4/ubc.h delete mode 100644 include/asm-sh/cpu-sh4/watchdog.h delete mode 100644 include/asm-sh/cpu-sh5/addrspace.h delete mode 100644 include/asm-sh/cpu-sh5/cache.h delete mode 100644 include/asm-sh/cpu-sh5/cacheflush.h delete mode 100644 include/asm-sh/cpu-sh5/dma.h delete mode 100644 include/asm-sh/cpu-sh5/irq.h delete mode 100644 include/asm-sh/cpu-sh5/mmu_context.h delete mode 100644 include/asm-sh/cpu-sh5/registers.h delete mode 100644 include/asm-sh/cpu-sh5/rtc.h delete mode 100644 include/asm-sh/cpu-sh5/timer.h delete mode 100644 include/asm-sh/cputime.h delete mode 100644 include/asm-sh/current.h delete mode 100644 include/asm-sh/delay.h delete mode 100644 include/asm-sh/device.h delete mode 100644 include/asm-sh/div64.h delete mode 100644 include/asm-sh/dma-mapping.h delete mode 100644 include/asm-sh/dma.h delete mode 100644 include/asm-sh/dmabrg.h delete mode 100644 include/asm-sh/dreamcast/dma.h delete mode 100644 include/asm-sh/dreamcast/maple.h delete mode 100644 include/asm-sh/dreamcast/pci.h delete mode 100644 include/asm-sh/dreamcast/sysasic.h delete mode 100644 include/asm-sh/edosk7705.h delete mode 100644 include/asm-sh/elf.h delete mode 100644 include/asm-sh/emergency-restart.h delete mode 100644 include/asm-sh/entry-macros.S delete mode 100644 include/asm-sh/errno.h delete mode 100644 include/asm-sh/fb.h delete mode 100644 include/asm-sh/fcntl.h delete mode 100644 include/asm-sh/fixmap.h delete mode 100644 include/asm-sh/flat.h delete mode 100644 include/asm-sh/fpu.h delete mode 100644 include/asm-sh/freq.h delete mode 100644 include/asm-sh/futex-irq.h delete mode 100644 include/asm-sh/futex.h delete mode 100644 include/asm-sh/gpio.h delete mode 100644 include/asm-sh/hardirq.h delete mode 100644 include/asm-sh/hd64461.h delete mode 100644 include/asm-sh/hd64465/gpio.h delete mode 100644 include/asm-sh/hd64465/hd64465.h delete mode 100644 include/asm-sh/hd64465/io.h delete mode 100644 include/asm-sh/heartbeat.h delete mode 100644 include/asm-sh/hp6xx.h delete mode 100644 include/asm-sh/hugetlb.h delete mode 100644 include/asm-sh/hw_irq.h delete mode 100644 include/asm-sh/i2c-sh7760.h delete mode 100644 include/asm-sh/ilsel.h delete mode 100644 include/asm-sh/io.h delete mode 100644 include/asm-sh/io_generic.h delete mode 100644 include/asm-sh/io_trapped.h delete mode 100644 include/asm-sh/ioctl.h delete mode 100644 include/asm-sh/ioctls.h delete mode 100644 include/asm-sh/ipcbuf.h delete mode 100644 include/asm-sh/irq.h delete mode 100644 include/asm-sh/irq_regs.h delete mode 100644 include/asm-sh/irqflags.h delete mode 100644 include/asm-sh/irqflags_32.h delete mode 100644 include/asm-sh/irqflags_64.h delete mode 100644 include/asm-sh/kdebug.h delete mode 100644 include/asm-sh/kexec.h delete mode 100644 include/asm-sh/kgdb.h delete mode 100644 include/asm-sh/kmap_types.h delete mode 100644 include/asm-sh/landisk/gio.h delete mode 100644 include/asm-sh/landisk/iodata_landisk.h delete mode 100644 include/asm-sh/lboxre2.h delete mode 100644 include/asm-sh/linkage.h delete mode 100644 include/asm-sh/local.h delete mode 100644 include/asm-sh/machvec.h delete mode 100644 include/asm-sh/magicpanelr2.h delete mode 100644 include/asm-sh/mc146818rtc.h delete mode 100644 include/asm-sh/microdev.h delete mode 100644 include/asm-sh/migor.h delete mode 100644 include/asm-sh/mman.h delete mode 100644 include/asm-sh/mmu.h delete mode 100644 include/asm-sh/mmu_context.h delete mode 100644 include/asm-sh/mmu_context_32.h delete mode 100644 include/asm-sh/mmu_context_64.h delete mode 100644 include/asm-sh/mmzone.h delete mode 100644 include/asm-sh/module.h delete mode 100644 include/asm-sh/msgbuf.h delete mode 100644 include/asm-sh/mutex.h delete mode 100644 include/asm-sh/page.h delete mode 100644 include/asm-sh/param.h delete mode 100644 include/asm-sh/parport.h delete mode 100644 include/asm-sh/pci.h delete mode 100644 include/asm-sh/percpu.h delete mode 100644 include/asm-sh/pgalloc.h delete mode 100644 include/asm-sh/pgtable.h delete mode 100644 include/asm-sh/pgtable_32.h delete mode 100644 include/asm-sh/pgtable_64.h delete mode 100644 include/asm-sh/pm.h delete mode 100644 include/asm-sh/poll.h delete mode 100644 include/asm-sh/posix_types.h delete mode 100644 include/asm-sh/posix_types_32.h delete mode 100644 include/asm-sh/posix_types_64.h delete mode 100644 include/asm-sh/processor.h delete mode 100644 include/asm-sh/processor_32.h delete mode 100644 include/asm-sh/processor_64.h delete mode 100644 include/asm-sh/ptrace.h delete mode 100644 include/asm-sh/push-switch.h delete mode 100644 include/asm-sh/r7780rp.h delete mode 100644 include/asm-sh/resource.h delete mode 100644 include/asm-sh/rtc.h delete mode 100644 include/asm-sh/rts7751r2d.h delete mode 100644 include/asm-sh/rwsem.h delete mode 100644 include/asm-sh/scatterlist.h delete mode 100644 include/asm-sh/sdk7780.h delete mode 100644 include/asm-sh/se.h delete mode 100644 include/asm-sh/se7206.h delete mode 100644 include/asm-sh/se7343.h delete mode 100644 include/asm-sh/se7721.h delete mode 100644 include/asm-sh/se7722.h delete mode 100644 include/asm-sh/se7751.h delete mode 100644 include/asm-sh/se7780.h delete mode 100644 include/asm-sh/sections.h delete mode 100644 include/asm-sh/segment.h delete mode 100644 include/asm-sh/sembuf.h delete mode 100644 include/asm-sh/serial.h delete mode 100644 include/asm-sh/setup.h delete mode 100644 include/asm-sh/sfp-machine.h delete mode 100644 include/asm-sh/sh03/io.h delete mode 100644 include/asm-sh/sh03/sh03.h delete mode 100644 include/asm-sh/sh7760fb.h delete mode 100644 include/asm-sh/sh7763rdp.h delete mode 100644 include/asm-sh/sh7785lcr.h delete mode 100644 include/asm-sh/sh_bios.h delete mode 100644 include/asm-sh/sh_keysc.h delete mode 100644 include/asm-sh/sh_mobile_lcdc.h delete mode 100644 include/asm-sh/shmbuf.h delete mode 100644 include/asm-sh/shmin.h delete mode 100644 include/asm-sh/shmparam.h delete mode 100644 include/asm-sh/sigcontext.h delete mode 100644 include/asm-sh/siginfo.h delete mode 100644 include/asm-sh/signal.h delete mode 100644 include/asm-sh/smc37c93x.h delete mode 100644 include/asm-sh/smp.h delete mode 100644 include/asm-sh/snapgear.h delete mode 100644 include/asm-sh/socket.h delete mode 100644 include/asm-sh/sockios.h delete mode 100644 include/asm-sh/sparsemem.h delete mode 100644 include/asm-sh/spi.h delete mode 100644 include/asm-sh/spinlock.h delete mode 100644 include/asm-sh/spinlock_types.h delete mode 100644 include/asm-sh/stat.h delete mode 100644 include/asm-sh/statfs.h delete mode 100644 include/asm-sh/string.h delete mode 100644 include/asm-sh/string_32.h delete mode 100644 include/asm-sh/string_64.h delete mode 100644 include/asm-sh/system.h delete mode 100644 include/asm-sh/system_32.h delete mode 100644 include/asm-sh/system_64.h delete mode 100644 include/asm-sh/systemh7751.h delete mode 100644 include/asm-sh/termbits.h delete mode 100644 include/asm-sh/termios.h delete mode 100644 include/asm-sh/thread_info.h delete mode 100644 include/asm-sh/timer.h delete mode 100644 include/asm-sh/timex.h delete mode 100644 include/asm-sh/titan.h delete mode 100644 include/asm-sh/tlb.h delete mode 100644 include/asm-sh/tlb_64.h delete mode 100644 include/asm-sh/tlbflush.h delete mode 100644 include/asm-sh/topology.h delete mode 100644 include/asm-sh/types.h delete mode 100644 include/asm-sh/uaccess.h delete mode 100644 include/asm-sh/uaccess_32.h delete mode 100644 include/asm-sh/uaccess_64.h delete mode 100644 include/asm-sh/ubc.h delete mode 100644 include/asm-sh/ucontext.h delete mode 100644 include/asm-sh/unaligned.h delete mode 100644 include/asm-sh/unistd.h delete mode 100644 include/asm-sh/unistd_32.h delete mode 100644 include/asm-sh/unistd_64.h delete mode 100644 include/asm-sh/user.h delete mode 100644 include/asm-sh/vga.h delete mode 100644 include/asm-sh/watchdog.h delete mode 100644 include/asm-sh/xor.h diff --git a/arch/sh/Makefile b/arch/sh/Makefile index c627e45c4df7..fbf875628312 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -91,8 +91,6 @@ LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' LDFLAGS += -EB endif -KBUILD_CFLAGS += -pipe $(cflags-y) -KBUILD_AFLAGS += $(cflags-y) head-y := arch/sh/kernel/init_task.o head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o @@ -160,57 +158,17 @@ drivers-$(CONFIG_OPROFILE) += arch/sh/oprofile/ boot := arch/sh/boot -ifneq ($(KBUILD_SRC),) -incdir-prefix := $(srctree)/include/asm-sh/ -else -incdir-prefix := -endif - -# Update machine arch and proc symlinks if something which affects -# them changed. We use .arch and .mach to indicate when they were -# updated last, otherwise make uses the target directory mtime. +cflags-y += -Iarch/sh/include/$(cpuincdir-y) +cflags-y += $(foreach d, $(incdir-y), -Iarch/sh/include/mach-$(d)) -include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \ - include/config/auto.conf FORCE - @echo ' SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)' - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi - $(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu - @touch $@ - -# Most boards have their own mach directories. For the ones that -# don't, just reference the parent directory so the semantics are -# kept roughly the same. -# -# When multiple boards are compiled in at the same time, preference -# for the mach link is given to whichever has a directory for its -# headers. However, this is only a workaround until platforms that -# can live in the same kernel image back away from relying on the -# mach link. - -include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \ - include/config/auto.conf FORCE - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi - $(Q)rm -f include/asm-sh/mach - $(Q)for i in $(incdir-y); do \ - if [ -d $(srctree)/include/asm-sh/$$i ]; then \ - echo -n ' SYMLINK include/asm-sh/mach -> '; \ - echo -e "include/asm-sh/$$i"; \ - ln -fsn $(incdir-prefix)$$i \ - include/asm-sh/mach; \ - else \ - if [ ! -d include/asm-sh/mach ]; then \ - echo -n ' SYMLINK include/asm-sh/mach -> '; \ - echo -e 'include/asm-sh'; \ - ln -fsn $(incdir-prefix)../asm-sh include/asm-sh/mach; \ - fi; \ - fi; \ - done - @touch $@ +KBUILD_CFLAGS += -pipe $(cflags-y) +KBUILD_CPPFLAGS += $(cflags-y) +KBUILD_AFLAGS += $(cflags-y) PHONY += maketools FORCE maketools: include/linux/version.h FORCE - $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h + $(Q)$(MAKE) $(build)=arch/sh/tools arch/sh/include/asm/machtypes.h all: $(KBUILD_IMAGE) @@ -219,8 +177,7 @@ zImage uImage uImage.srec vmlinux.srec: vmlinux compressed: zImage -archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools \ - arch/sh/lib64/syscalltab.h +archprepare: maketools arch/sh/lib64/syscalltab.h archclean: $(Q)$(MAKE) $(clean)=$(boot) @@ -262,6 +219,4 @@ arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S $(call filechk,gen-syscalltab) CLEAN_FILES += arch/sh/lib64/syscalltab.h \ - include/asm-sh/machtypes.h \ - include/asm-sh/cpu include/asm-sh/.cpu \ - include/asm-sh/mach include/asm-sh/.mach + arch/sh/include/asm/machtypes.h diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/cayman/irq.c index 30ec7bebfaf1..ceb37ae92c70 100644 --- a/arch/sh/boards/cayman/irq.c +++ b/arch/sh/boards/cayman/irq.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include /* Setup for the SMSC FDC37C935 / LAN91C100FD */ diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/cayman/setup.c index 8c9fa472d8f5..e7f9cc5f2ff1 100644 --- a/arch/sh/boards/cayman/setup.c +++ b/arch/sh/boards/cayman/setup.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include /* * Platform Dependent Interrupt Priorities. diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c index 9d0673a9092a..67bdc33dd411 100644 --- a/arch/sh/boards/dreamcast/irq.c +++ b/arch/sh/boards/dreamcast/irq.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include /* Dreamcast System ASIC Hardware Events - diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c index 2581c8cd5df7..14c3e57ff410 100644 --- a/arch/sh/boards/dreamcast/setup.c +++ b/arch/sh/boards/dreamcast/setup.c @@ -25,8 +25,8 @@ #include #include #include -#include -#include +#include +#include extern struct hw_interrupt_type systemasic_int; extern void aica_time_init(void); diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/hp6xx/pm.c index d22f6eac9cca..e96684def788 100644 --- a/arch/sh/boards/hp6xx/pm.c +++ b/arch/sh/boards/hp6xx/pm.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #define STBCR 0xffffff82 diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/hp6xx/pm_wakeup.S index 45e9bf0b9115..44b648cf6f23 100644 --- a/arch/sh/boards/hp6xx/pm_wakeup.S +++ b/arch/sh/boards/hp6xx/pm_wakeup.S @@ -8,7 +8,7 @@ */ #include -#include +#include #define k0 r0 #define k1 r1 diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c index 2f414ac3c690..475b46caec1f 100644 --- a/arch/sh/boards/hp6xx/setup.c +++ b/arch/sh/boards/hp6xx/setup.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #define SCPCR 0xa4000116 #define SCPDR 0xa4000136 diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c index 0c15b0a50b99..edcde082032d 100644 --- a/arch/sh/boards/landisk/gio.c +++ b/arch/sh/boards/landisk/gio.c @@ -20,8 +20,8 @@ #include #include #include -#include -#include +#include +#include #define DEVCOUNT 4 #define GIO_MINOR 2 /* GIO minor no. */ diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c index 258649491d44..d0f9378f6ff4 100644 --- a/arch/sh/boards/landisk/irq.c +++ b/arch/sh/boards/landisk/irq.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include static void disable_landisk_irq(unsigned int irq) { diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/landisk/psw.c index 5a9b70b5decb..4bd502cbaeeb 100644 --- a/arch/sh/boards/landisk/psw.c +++ b/arch/sh/boards/landisk/psw.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include static irqreturn_t psw_irq_handler(int irq, void *arg) diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c index 2b708ec72558..470c78111681 100644 --- a/arch/sh/boards/landisk/setup.c +++ b/arch/sh/boards/landisk/setup.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include void init_landisk_IRQ(void); diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/renesas/r7780rp/psw.c index c844dfa5d58d..0b3e062e96cc 100644 --- a/arch/sh/boards/renesas/r7780rp/psw.c +++ b/arch/sh/boards/renesas/r7780rp/psw.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include static irqreturn_t psw_irq_handler(int irq, void *arg) diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/se/7343/io.c index 3a6d11424938..e2fae32d27d7 100644 --- a/arch/sh/boards/se/7343/io.c +++ b/arch/sh/boards/se/7343/io.c @@ -6,7 +6,7 @@ */ #include #include -#include +#include #define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index 8ae718d6c710..59dc92e20f64 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -1,8 +1,8 @@ #include #include #include -#include -#include +#include +#include #include #include #include diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c index 934ac4f1c48f..cd9cff1ed349 100644 --- a/arch/sh/boards/sh03/setup.c +++ b/arch/sh/boards/sh03/setup.c @@ -11,8 +11,8 @@ #include #include #include -#include -#include +#include +#include #include static void __init init_sh03_IRQ(void) diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c index 7022483f98e8..a5e349d3dda2 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/snapgear/setup.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include /* * EraseConfig handling functions diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S index f72c1989f5f2..622eac3cf556 100644 --- a/arch/sh/boot/compressed/head_64.S +++ b/arch/sh/boot/compressed/head_64.S @@ -14,8 +14,8 @@ * Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com) */ #include -#include -#include +#include +#include /* * Fixed TLB entries to identity map the beginning of RAM diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c index 0caf11bb7e27..af7bb589c2c8 100644 --- a/arch/sh/drivers/dma/dma-g2.c +++ b/arch/sh/drivers/dma/dma-g2.c @@ -14,8 +14,8 @@ #include #include #include -#include -#include +#include +#include #include struct g2_channel { diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c index 838fad566eaf..391cbe1c2956 100644 --- a/arch/sh/drivers/dma/dma-pvr2.c +++ b/arch/sh/drivers/dma/dma-pvr2.c @@ -13,8 +13,8 @@ #include #include #include -#include -#include +#include +#include #include #include diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 71ff3d6f26e2..bd305483c144 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include "dma-sh.h" diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h index 0f591fbc922d..b05af34fc15d 100644 --- a/arch/sh/drivers/dma/dma-sh.h +++ b/arch/sh/drivers/dma/dma-sh.h @@ -11,7 +11,7 @@ #ifndef __DMA_SH_H #define __DMA_SH_H -#include +#include /* Definitions for the SuperH DMAC */ #define REQ_L 0x00000000 diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index c44699301eeb..2bf85cf091e1 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -26,7 +26,7 @@ #include #include -#include +#include static void __init gapspci_fixup_resources(struct pci_dev *dev) { diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c index 980275ffa30b..5ccf9ea3a9de 100644 --- a/arch/sh/drivers/pci/ops-cayman.c +++ b/arch/sh/drivers/pci/ops-cayman.c @@ -2,7 +2,7 @@ #include #include #include -#include +#include #include "pci-sh5.h" static inline u8 bridge_swizzle(u8 pin, u8 slot) diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index f54c291db37b..f5d2a2aa6f3f 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -26,7 +26,7 @@ #include #include -#include +#include static struct resource gapspci_io_resource = { .name = "GAPSPCI IO", diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index a00a4df8c02d..7a97438762c8 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include #include #include "pci-sh5.h" diff --git a/arch/sh/include/asm/.gitignore b/arch/sh/include/asm/.gitignore new file mode 100644 index 000000000000..378db779fb6c --- /dev/null +++ b/arch/sh/include/asm/.gitignore @@ -0,0 +1 @@ +machtypes.h diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild new file mode 100644 index 000000000000..43910cdf78a5 --- /dev/null +++ b/arch/sh/include/asm/Kbuild @@ -0,0 +1,8 @@ +include include/asm-generic/Kbuild.asm + +header-y += cpu-features.h + +unifdef-y += unistd_32.h +unifdef-y += unistd_64.h +unifdef-y += posix_types_32.h +unifdef-y += posix_types_64.h diff --git a/arch/sh/include/asm/a.out.h b/arch/sh/include/asm/a.out.h new file mode 100644 index 000000000000..1f93130e179c --- /dev/null +++ b/arch/sh/include/asm/a.out.h @@ -0,0 +1,20 @@ +#ifndef __ASM_SH_A_OUT_H +#define __ASM_SH_A_OUT_H + +struct exec +{ + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#endif /* __ASM_SH_A_OUT_H */ diff --git a/arch/sh/include/asm/adc.h b/arch/sh/include/asm/adc.h new file mode 100644 index 000000000000..48824c1fab80 --- /dev/null +++ b/arch/sh/include/asm/adc.h @@ -0,0 +1,13 @@ +#ifndef __ASM_ADC_H +#define __ASM_ADC_H +#ifdef __KERNEL__ +/* + * Copyright (C) 2004 Andriy Skulysh + */ + +#include + +int adc_single(unsigned int channel); + +#endif /* __KERNEL__ */ +#endif /* __ASM_ADC_H */ diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h new file mode 100644 index 000000000000..2702d81bfc0d --- /dev/null +++ b/arch/sh/include/asm/addrspace.h @@ -0,0 +1,53 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Kaz Kojima + * + * Defitions for the address spaces of the SH CPUs. + */ +#ifndef __ASM_SH_ADDRSPACE_H +#define __ASM_SH_ADDRSPACE_H + +#ifdef __KERNEL__ + +#include + +/* If this CPU supports segmentation, hook up the helpers */ +#ifdef P1SEG + +/* + [ P0/U0 (virtual) ] 0x00000000 <------ User space + [ P1 (fixed) cached ] 0x80000000 <------ Kernel space + [ P2 (fixed) non-cachable] 0xA0000000 <------ Physical access + [ P3 (virtual) cached] 0xC0000000 <------ vmalloced area + [ P4 control ] 0xE0000000 + */ + +/* Returns the privileged segment base of a given address */ +#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000) + +/* Returns the physical address of a PnSEG (n=1,2) address */ +#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) + +#ifdef CONFIG_29BIT +/* + * Map an address to a certain privileged segment + */ +#define P1SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG)) +#define P2SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG)) +#define P3SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG)) +#define P4SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG)) +#endif /* 29BIT */ +#endif /* P1SEG */ + +/* Check if an address can be reached in 29 bits */ +#define IS_29BIT(a) (((unsigned long)(a)) < 0x20000000) + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_ADDRSPACE_H */ diff --git a/arch/sh/include/asm/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h new file mode 100644 index 000000000000..4c5b7dbfcedb --- /dev/null +++ b/arch/sh/include/asm/atomic-grb.h @@ -0,0 +1,169 @@ +#ifndef __ASM_SH_ATOMIC_GRB_H +#define __ASM_SH_ATOMIC_GRB_H + +static inline void atomic_add(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " add %2, %0 \n\t" /* add */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory" , "r0", "r1"); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " sub %2, %0 \n\t" /* sub */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory" , "r0", "r1"); +} + +static inline int atomic_add_return(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " add %2, %0 \n\t" /* add */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory" , "r0", "r1"); + + return tmp; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " sub %2, %0 \n\t" /* sub */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory", "r0", "r1"); + + return tmp; +} + +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) +{ + int tmp; + unsigned int _mask = ~mask; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " and %2, %0 \n\t" /* add */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (_mask) + : "memory" , "r0", "r1"); +} + +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " or %2, %0 \n\t" /* or */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" + " nop \n\t" + " mov r15, r1 \n\t" + " mov #-8, r15 \n\t" + " mov.l @%1, %0 \n\t" + " cmp/eq %2, %0 \n\t" + " bf 1f \n\t" + " mov.l %3, @%1 \n\t" + "1: mov r1, r15 \n\t" + : "=&r" (ret) + : "r" (v), "r" (old), "r" (new) + : "memory" , "r0", "r1" , "t"); + + return ret; +} + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" + " nop \n\t" + " mov r15, r1 \n\t" + " mov #-12, r15 \n\t" + " mov.l @%2, %1 \n\t" + " mov %1, %0 \n\t" + " cmp/eq %4, %0 \n\t" + " bt/s 1f \n\t" + " add %3, %1 \n\t" + " mov.l %1, @%2 \n\t" + "1: mov r1, r15 \n\t" + : "=&r" (ret), "=&r" (tmp) + : "r" (v), "r" (a), "r" (u) + : "memory" , "r0", "r1" , "t"); + + return ret != u; +} +#endif /* __ASM_SH_ATOMIC_GRB_H */ diff --git a/arch/sh/include/asm/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h new file mode 100644 index 000000000000..74f7943cff6f --- /dev/null +++ b/arch/sh/include/asm/atomic-irq.h @@ -0,0 +1,71 @@ +#ifndef __ASM_SH_ATOMIC_IRQ_H +#define __ASM_SH_ATOMIC_IRQ_H + +/* + * To get proper branch prediction for the main line, we must branch + * forward to code at the end of this object's .text section, then + * branch back to restart the operation. + */ +static inline void atomic_add(int i, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v += i; + local_irq_restore(flags); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v -= i; + local_irq_restore(flags); +} + +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long temp, flags; + + local_irq_save(flags); + temp = *(long *)v; + temp += i; + *(long *)v = temp; + local_irq_restore(flags); + + return temp; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long temp, flags; + + local_irq_save(flags); + temp = *(long *)v; + temp -= i; + *(long *)v = temp; + local_irq_restore(flags); + + return temp; +} + +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v &= ~mask; + local_irq_restore(flags); +} + +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v |= mask; + local_irq_restore(flags); +} + +#endif /* __ASM_SH_ATOMIC_IRQ_H */ diff --git a/arch/sh/include/asm/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h new file mode 100644 index 000000000000..4b00b78e3f4f --- /dev/null +++ b/arch/sh/include/asm/atomic-llsc.h @@ -0,0 +1,107 @@ +#ifndef __ASM_SH_ATOMIC_LLSC_H +#define __ASM_SH_ATOMIC_LLSC_H + +/* + * To get proper branch prediction for the main line, we must branch + * forward to code at the end of this object's .text section, then + * branch back to restart the operation. + */ +static inline void atomic_add(int i, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_add \n" +" add %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (i), "r" (&v->counter) + : "t"); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_sub \n" +" sub %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (i), "r" (&v->counter) + : "t"); +} + +/* + * SH-4A note: + * + * We basically get atomic_xxx_return() for free compared with + * atomic_xxx(). movli.l/movco.l require r0 due to the instruction + * encoding, so the retval is automatically set without having to + * do any special work. + */ +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long temp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_add_return \n" +" add %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" +" synco \n" + : "=&z" (temp) + : "r" (i), "r" (&v->counter) + : "t"); + + return temp; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long temp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_sub_return \n" +" sub %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" +" synco \n" + : "=&z" (temp) + : "r" (i), "r" (&v->counter) + : "t"); + + return temp; +} + +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_clear_mask \n" +" and %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (~mask), "r" (&v->counter) + : "t"); +} + +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_set_mask \n" +" or %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (mask), "r" (&v->counter) + : "t"); +} + +#endif /* __ASM_SH_ATOMIC_LLSC_H */ diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h new file mode 100644 index 000000000000..c043ef003028 --- /dev/null +++ b/arch/sh/include/asm/atomic.h @@ -0,0 +1,89 @@ +#ifndef __ASM_SH_ATOMIC_H +#define __ASM_SH_ATOMIC_H + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + * + */ + +typedef struct { volatile int counter; } atomic_t; + +#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) + +#define atomic_read(v) ((v)->counter) +#define atomic_set(v,i) ((v)->counter = (i)) + +#include +#include + +#if defined(CONFIG_GUSA_RB) +#include +#elif defined(CONFIG_CPU_SH4A) +#include +#else +#include +#endif + +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) + +#define atomic_dec_return(v) atomic_sub_return(1,(v)) +#define atomic_inc_return(v) atomic_add_return(1,(v)) + +/* + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) + +#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) + +#define atomic_inc(v) atomic_add(1,(v)) +#define atomic_dec(v) atomic_sub(1,(v)) + +#ifndef CONFIG_GUSA_RB +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (ret != u) + v->counter += a; + local_irq_restore(flags); + + return ret != u; +} +#endif + +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +/* Atomic operations are already serializing on SH */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include +#endif /* __ASM_SH_ATOMIC_H */ diff --git a/arch/sh/include/asm/auxvec.h b/arch/sh/include/asm/auxvec.h new file mode 100644 index 000000000000..a6b9d4f4859e --- /dev/null +++ b/arch/sh/include/asm/auxvec.h @@ -0,0 +1,36 @@ +#ifndef __ASM_SH_AUXVEC_H +#define __ASM_SH_AUXVEC_H + +/* + * Architecture-neutral AT_ values in 0-17, leave some room + * for more of them. + */ + +/* + * This entry gives some information about the FPU initialization + * performed by the kernel. + */ +#define AT_FPUCW 18 /* Used FPU control word. */ + +#ifdef CONFIG_VSYSCALL +/* + * Only define this in the vsyscall case, the entry point to + * the vsyscall page gets placed here. The kernel will attempt + * to build a gate VMA we don't care about otherwise.. + */ +#define AT_SYSINFO_EHDR 33 +#endif + +/* + * More complete cache descriptions than AT_[DIU]CACHEBSIZE. If the + * value is -1, then the cache doesn't exist. Otherwise: + * + * bit 0-3: Cache set-associativity; 0 means fully associative. + * bit 4-7: Log2 of cacheline size. + * bit 8-31: Size of the entire cache >> 8. + */ +#define AT_L1I_CACHESHAPE 34 +#define AT_L1D_CACHESHAPE 35 +#define AT_L2_CACHESHAPE 36 + +#endif /* __ASM_SH_AUXVEC_H */ diff --git a/arch/sh/include/asm/bitops-grb.h b/arch/sh/include/asm/bitops-grb.h new file mode 100644 index 000000000000..a5907b94395b --- /dev/null +++ b/arch/sh/include/asm/bitops-grb.h @@ -0,0 +1,169 @@ +#ifndef __ASM_SH_BITOPS_GRB_H +#define __ASM_SH_BITOPS_GRB_H + +static inline void set_bit(int nr, volatile void * addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " or %2, %0 \n\t" /* or */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline void clear_bit(int nr, volatile void * addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = ~(1 << (nr & 0x1f)); + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " and %2, %0 \n\t" /* and */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline void change_bit(int nr, volatile void * addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " xor %2, %0 \n\t" /* xor */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline int test_and_set_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-14, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%2, %0 \n\t" /* load old value */ + " mov %0, %1 \n\t" + " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ + " mov #-1, %1 \n\t" /* retvat = -1 */ + " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ + " or %3, %0 \n\t" + " mov.l %0, @%2 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "=&r" (retval), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1" ,"t"); + + return retval; +} + +static inline int test_and_clear_bit(int nr, volatile void * addr) +{ + int mask, retval,not_mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + not_mask = ~mask; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-14, r15 \n\t" /* LOGIN */ + " mov.l @%2, %0 \n\t" /* load old value */ + " mov %0, %1 \n\t" /* %1 = *a */ + " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ + " mov #-1, %1 \n\t" /* retvat = -1 */ + " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ + " and %4, %0 \n\t" + " mov.l %0, @%2 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "=&r" (retval), + "+r" (a) + : "r" (mask), + "r" (not_mask) + : "memory" , "r0", "r1", "t"); + + return retval; +} + +static inline int test_and_change_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-14, r15 \n\t" /* LOGIN */ + " mov.l @%2, %0 \n\t" /* load old value */ + " mov %0, %1 \n\t" /* %1 = *a */ + " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ + " mov #-1, %1 \n\t" /* retvat = -1 */ + " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ + " xor %3, %0 \n\t" + " mov.l %0, @%2 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "=&r" (retval), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1", "t"); + + return retval; +} +#endif /* __ASM_SH_BITOPS_GRB_H */ diff --git a/arch/sh/include/asm/bitops-irq.h b/arch/sh/include/asm/bitops-irq.h new file mode 100644 index 000000000000..653a12750584 --- /dev/null +++ b/arch/sh/include/asm/bitops-irq.h @@ -0,0 +1,91 @@ +#ifndef __ASM_SH_BITOPS_IRQ_H +#define __ASM_SH_BITOPS_IRQ_H + +static inline void set_bit(int nr, volatile void *addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a |= mask; + local_irq_restore(flags); +} + +static inline void clear_bit(int nr, volatile void *addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a &= ~mask; + local_irq_restore(flags); +} + +static inline void change_bit(int nr, volatile void *addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a ^= mask; + local_irq_restore(flags); +} + +static inline int test_and_set_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a |= mask; + local_irq_restore(flags); + + return retval; +} + +static inline int test_and_clear_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a &= ~mask; + local_irq_restore(flags); + + return retval; +} + +static inline int test_and_change_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a ^= mask; + local_irq_restore(flags); + + return retval; +} + +#endif /* __ASM_SH_BITOPS_IRQ_H */ diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h new file mode 100644 index 000000000000..d7d382f63ee5 --- /dev/null +++ b/arch/sh/include/asm/bitops.h @@ -0,0 +1,103 @@ +#ifndef __ASM_SH_BITOPS_H +#define __ASM_SH_BITOPS_H + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#include +/* For __swab32 */ +#include + +#ifdef CONFIG_GUSA_RB +#include +#else +#include +#endif + + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +#include + +#ifdef CONFIG_SUPERH32 +static inline unsigned long ffz(unsigned long word) +{ + unsigned long result; + + __asm__("1:\n\t" + "shlr %1\n\t" + "bt/s 1b\n\t" + " add #1, %0" + : "=r" (result), "=r" (word) + : "0" (~0L), "1" (word) + : "t"); + return result; +} + +/** + * __ffs - find first bit in word. + * @word: The word to search + * + * Undefined if no bit exists, so code should check against 0 first. + */ +static inline unsigned long __ffs(unsigned long word) +{ + unsigned long result; + + __asm__("1:\n\t" + "shlr %1\n\t" + "bf/s 1b\n\t" + " add #1, %0" + : "=r" (result), "=r" (word) + : "0" (~0L), "1" (word) + : "t"); + return result; +} +#else +static inline unsigned long ffz(unsigned long word) +{ + unsigned long result, __d2, __d3; + + __asm__("gettr tr0, %2\n\t" + "pta $+32, tr0\n\t" + "andi %1, 1, %3\n\t" + "beq %3, r63, tr0\n\t" + "pta $+4, tr0\n" + "0:\n\t" + "shlri.l %1, 1, %1\n\t" + "addi %0, 1, %0\n\t" + "andi %1, 1, %3\n\t" + "beqi %3, 1, tr0\n" + "1:\n\t" + "ptabs %2, tr0\n\t" + : "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3) + : "0" (0L), "1" (word)); + + return result; +} + +#include +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_BITOPS_H */ diff --git a/arch/sh/include/asm/bug.h b/arch/sh/include/asm/bug.h new file mode 100644 index 000000000000..c01718040166 --- /dev/null +++ b/arch/sh/include/asm/bug.h @@ -0,0 +1,79 @@ +#ifndef __ASM_SH_BUG_H +#define __ASM_SH_BUG_H + +#define TRAPA_BUG_OPCODE 0xc33e /* trapa #0x3e */ + +#ifdef CONFIG_GENERIC_BUG +#define HAVE_ARCH_BUG +#define HAVE_ARCH_WARN_ON + +/** + * _EMIT_BUG_ENTRY + * %1 - __FILE__ + * %2 - __LINE__ + * %3 - trap type + * %4 - sizeof(struct bug_entry) + * + * The trapa opcode itself sits in %0. + * The %O notation is used to avoid # generation. + * + * The offending file and line are encoded in the __bug_table section. + */ +#ifdef CONFIG_DEBUG_BUGVERBOSE +#define _EMIT_BUG_ENTRY \ + "\t.pushsection __bug_table,\"a\"\n" \ + "2:\t.long 1b, %O1\n" \ + "\t.short %O2, %O3\n" \ + "\t.org 2b+%O4\n" \ + "\t.popsection\n" +#else +#define _EMIT_BUG_ENTRY \ + "\t.pushsection __bug_table,\"a\"\n" \ + "2:\t.long 1b\n" \ + "\t.short %O3\n" \ + "\t.org 2b+%O4\n" \ + "\t.popsection\n" +#endif + +#define BUG() \ +do { \ + __asm__ __volatile__ ( \ + "1:\t.short %O0\n" \ + _EMIT_BUG_ENTRY \ + : \ + : "n" (TRAPA_BUG_OPCODE), \ + "i" (__FILE__), \ + "i" (__LINE__), "i" (0), \ + "i" (sizeof(struct bug_entry))); \ +} while (0) + +#define __WARN() \ +do { \ + __asm__ __volatile__ ( \ + "1:\t.short %O0\n" \ + _EMIT_BUG_ENTRY \ + : \ + : "n" (TRAPA_BUG_OPCODE), \ + "i" (__FILE__), \ + "i" (__LINE__), \ + "i" (BUGFLAG_WARNING), \ + "i" (sizeof(struct bug_entry))); \ +} while (0) + +#define WARN_ON(x) ({ \ + int __ret_warn_on = !!(x); \ + if (__builtin_constant_p(__ret_warn_on)) { \ + if (__ret_warn_on) \ + __WARN(); \ + } else { \ + if (unlikely(__ret_warn_on)) \ + __WARN(); \ + } \ + unlikely(__ret_warn_on); \ +}) + +#endif /* CONFIG_GENERIC_BUG */ + +#include + +#endif /* __ASM_SH_BUG_H */ diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h new file mode 100644 index 000000000000..121b2ecddfc3 --- /dev/null +++ b/arch/sh/include/asm/bugs.h @@ -0,0 +1,73 @@ +#ifndef __ASM_SH_BUGS_H +#define __ASM_SH_BUGS_H + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ + +/* + * I don't know of any Super-H bugs yet. + */ + +#include + +static void __init check_bugs(void) +{ + extern unsigned long loops_per_jiffy; + char *p = &init_utsname()->machine[2]; /* "sh" */ + + current_cpu_data.loops_per_jiffy = loops_per_jiffy; + + switch (current_cpu_data.type) { + case CPU_SH7619: + *p++ = '2'; + break; + case CPU_SH7203 ... CPU_MXG: + *p++ = '2'; + *p++ = 'a'; + break; + case CPU_SH7705 ... CPU_SH7729: + *p++ = '3'; + break; + case CPU_SH7750 ... CPU_SH4_501: + *p++ = '4'; + break; + case CPU_SH7763 ... CPU_SHX3: + *p++ = '4'; + *p++ = 'a'; + break; + case CPU_SH7343 ... CPU_SH7366: + *p++ = '4'; + *p++ = 'a'; + *p++ = 'l'; + *p++ = '-'; + *p++ = 'd'; + *p++ = 's'; + *p++ = 'p'; + break; + case CPU_SH5_101 ... CPU_SH5_103: + *p++ = '6'; + *p++ = '4'; + break; + case CPU_SH_NONE: + /* + * Specifically use CPU_SH_NONE rather than default:, + * so we're able to have the compiler whine about + * unhandled enumerations. + */ + break; + } + + printk("CPU: %s\n", get_cpu_subtype(¤t_cpu_data)); + +#ifndef __LITTLE_ENDIAN__ + /* 'eb' means 'Endian Big' */ + *p++ = 'e'; + *p++ = 'b'; +#endif + *p = '\0'; +} +#endif /* __ASM_SH_BUGS_H */ diff --git a/arch/sh/include/asm/byteorder.h b/arch/sh/include/asm/byteorder.h new file mode 100644 index 000000000000..4c13e6117563 --- /dev/null +++ b/arch/sh/include/asm/byteorder.h @@ -0,0 +1,70 @@ +#ifndef __ASM_SH_BYTEORDER_H +#define __ASM_SH_BYTEORDER_H + +/* + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2000, 2001 Paolo Alberelli + */ +#include +#include + +static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) +{ + __asm__( +#ifdef __SH5__ + "byterev %0, %0\n\t" + "shari %0, 32, %0" +#else + "swap.b %0, %0\n\t" + "swap.w %0, %0\n\t" + "swap.b %0, %0" +#endif + : "=r" (x) + : "0" (x)); + + return x; +} + +static inline __attribute_const__ __u16 ___arch__swab16(__u16 x) +{ + __asm__( +#ifdef __SH5__ + "byterev %0, %0\n\t" + "shari %0, 32, %0" +#else + "swap.b %0, %0" +#endif + : "=r" (x) + : "0" (x)); + + return x; +} + +static inline __u64 ___arch__swab64(__u64 val) +{ + union { + struct { __u32 a,b; } s; + __u64 u; + } v, w; + v.u = val; + w.s.b = ___arch__swab32(v.s.a); + w.s.a = ___arch__swab32(v.s.b); + return w.u; +} + +#define __arch__swab64(x) ___arch__swab64(x) +#define __arch__swab32(x) ___arch__swab32(x) +#define __arch__swab16(x) ___arch__swab16(x) + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#ifdef __LITTLE_ENDIAN__ +#include +#else +#include +#endif + +#endif /* __ASM_SH_BYTEORDER_H */ diff --git a/arch/sh/include/asm/cache.h b/arch/sh/include/asm/cache.h new file mode 100644 index 000000000000..02df18ea9608 --- /dev/null +++ b/arch/sh/include/asm/cache.h @@ -0,0 +1,51 @@ +/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $ + * + * include/asm-sh/cache.h + * + * Copyright 1999 (C) Niibe Yutaka + * Copyright 2002, 2003 (C) Paul Mundt + */ +#ifndef __ASM_SH_CACHE_H +#define __ASM_SH_CACHE_H +#ifdef __KERNEL__ + +#include +#include + +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define __read_mostly __attribute__((__section__(".data.read_mostly"))) + +#ifndef __ASSEMBLY__ +struct cache_info { + unsigned int ways; /* Number of cache ways */ + unsigned int sets; /* Number of cache sets */ + unsigned int linesz; /* Cache line size (bytes) */ + + unsigned int way_size; /* sets * line size */ + + /* + * way_incr is the address offset for accessing the next way + * in memory mapped cache array ops. + */ + unsigned int way_incr; + unsigned int entry_shift; + unsigned int entry_mask; + + /* + * Compute a mask which selects the address bits which overlap between + * 1. those used to select the cache set during indexing + * 2. those in the physical page number. + */ + unsigned int alias_mask; + + unsigned int n_aliases; /* Number of aliases */ + + unsigned long flags; +}; + +int __init detect_cpu_and_cache_system(void); + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_CACHE_H */ diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h new file mode 100644 index 000000000000..09acbc32d6c7 --- /dev/null +++ b/arch/sh/include/asm/cacheflush.h @@ -0,0 +1,81 @@ +#ifndef __ASM_SH_CACHEFLUSH_H +#define __ASM_SH_CACHEFLUSH_H + +#ifdef __KERNEL__ + +#ifdef CONFIG_CACHE_OFF +/* + * Nothing to do when the cache is disabled, initial flush and explicit + * disabling is handled at CPU init time. + * + * See arch/sh/kernel/cpu/init.c:cache_init(). + */ +#define p3_cache_init() do { } while (0) +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_cache_sigtramp(vaddr) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define __flush_wback_region(start, size) do { (void)(start); } while (0) +#define __flush_purge_region(start, size) do { (void)(start); } while (0) +#define __flush_invalidate_region(start, size) do { (void)(start); } while (0) +#else +#include + +/* + * Consistent DMA requires that the __flush_xxx() primitives must be set + * for any of the enabled non-coherent caches (most of the UP CPUs), + * regardless of PIPT or VIPT cache configurations. + */ + +/* Flush (write-back only) a region (smaller than a page) */ +extern void __flush_wback_region(void *start, int size); +/* Flush (write-back & invalidate) a region (smaller than a page) */ +extern void __flush_purge_region(void *start, int size); +/* Flush (invalidate only) a region (smaller than a page) */ +extern void __flush_invalidate_region(void *start, int size); +#endif + +#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE +static inline void flush_kernel_dcache_page(struct page *page) +{ + flush_dcache_page(page); +} + +#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF) +extern void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len); + +extern void copy_from_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len); +#else +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + flush_cache_page(vma, vaddr, page_to_pfn(page));\ + memcpy(dst, src, len); \ + flush_icache_user_range(vma, page, vaddr, len); \ + } while (0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + flush_cache_page(vma, vaddr, page_to_pfn(page));\ + memcpy(dst, src, len); \ + } while (0) +#endif + +#define flush_cache_vmap(start, end) flush_cache_all() +#define flush_cache_vunmap(start, end) flush_cache_all() + +#define HAVE_ARCH_UNMAPPED_AREA + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_CACHEFLUSH_H */ diff --git a/arch/sh/include/asm/checksum.h b/arch/sh/include/asm/checksum.h new file mode 100644 index 000000000000..67496ab0ef04 --- /dev/null +++ b/arch/sh/include/asm/checksum.h @@ -0,0 +1,5 @@ +#ifdef CONFIG_SUPERH32 +# include "checksum_32.h" +#else +# include "checksum_64.h" +#endif diff --git a/arch/sh/include/asm/checksum_32.h b/arch/sh/include/asm/checksum_32.h new file mode 100644 index 000000000000..14b7ac2f0a07 --- /dev/null +++ b/arch/sh/include/asm/checksum_32.h @@ -0,0 +1,215 @@ +#ifndef __ASM_SH_CHECKSUM_H +#define __ASM_SH_CHECKSUM_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Kaz Kojima & Niibe Yutaka + */ + +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums, and handles user-space pointer exceptions correctly, when needed. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, + int len, __wsum sum, + int *src_err_ptr, int *dst_err_ptr); + +/* + * Note: when you get a NULL pointer exception here this means someone + * passed in an incorrect kernel address to one of these functions. + * + * If you use these functions directly please don't forget the + * access_ok(). + */ +static inline +__wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum) +{ + return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL); +} + +static inline +__wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *err_ptr) +{ + return csum_partial_copy_generic((__force const void *)src, dst, + len, sum, err_ptr, NULL); +} + +/* + * Fold a partial checksum + */ + +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int __dummy; + __asm__("swap.w %0, %1\n\t" + "extu.w %0, %0\n\t" + "extu.w %1, %1\n\t" + "add %1, %0\n\t" + "swap.w %0, %1\n\t" + "add %1, %0\n\t" + "not %0, %0\n\t" + : "=r" (sum), "=&r" (__dummy) + : "0" (sum) + : "t"); + return (__force __sum16)sum; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + * + * i386 version by Jorge Cwik , adapted + * for linux by * Arnt Gulbrandsen. + */ +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + unsigned int sum, __dummy0, __dummy1; + + __asm__ __volatile__( + "mov.l @%1+, %0\n\t" + "mov.l @%1+, %3\n\t" + "add #-2, %2\n\t" + "clrt\n\t" + "1:\t" + "addc %3, %0\n\t" + "movt %4\n\t" + "mov.l @%1+, %3\n\t" + "dt %2\n\t" + "bf/s 1b\n\t" + " cmp/eq #1, %4\n\t" + "addc %3, %0\n\t" + "addc %2, %0" /* Here %2 is 0, add carry-bit */ + /* Since the input registers which are loaded with iph and ihl + are modified, we must also specify them as outputs, or gcc + will assume they contain their original values. */ + : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1) + : "1" (iph), "2" (ihl) + : "t", "memory"); + + return csum_fold(sum); +} + +static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ +#ifdef __LITTLE_ENDIAN__ + unsigned long len_proto = (proto + len) << 8; +#else + unsigned long len_proto = proto + len; +#endif + __asm__("clrt\n\t" + "addc %0, %1\n\t" + "addc %2, %1\n\t" + "addc %3, %1\n\t" + "movt %0\n\t" + "add %1, %0" + : "=r" (sum), "=r" (len_proto) + : "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum) + : "t"); + + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, unsigned short proto, + __wsum sum) +{ + unsigned int __dummy; + __asm__("clrt\n\t" + "mov.l @(0,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(4,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(8,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(12,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(0,%3), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(4,%3), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(8,%3), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(12,%3), %1\n\t" + "addc %1, %0\n\t" + "addc %4, %0\n\t" + "addc %5, %0\n\t" + "movt %1\n\t" + "add %1, %0\n" + : "=r" (sum), "=&r" (__dummy) + : "r" (saddr), "r" (daddr), + "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) + : "t"); + + return csum_fold(sum); +} + +/* + * Copy and checksum to user + */ +#define HAVE_CSUM_COPY_USER +static inline __wsum csum_and_copy_to_user(const void *src, + void __user *dst, + int len, __wsum sum, + int *err_ptr) +{ + if (access_ok(VERIFY_WRITE, dst, len)) + return csum_partial_copy_generic((__force const void *)src, + dst, len, sum, NULL, err_ptr); + + if (len) + *err_ptr = -EFAULT; + + return (__force __wsum)-1; /* invalid checksum */ +} +#endif /* __ASM_SH_CHECKSUM_H */ diff --git a/arch/sh/include/asm/checksum_64.h b/arch/sh/include/asm/checksum_64.h new file mode 100644 index 000000000000..9c62a031a8f5 --- /dev/null +++ b/arch/sh/include/asm/checksum_64.h @@ -0,0 +1,78 @@ +#ifndef __ASM_SH_CHECKSUM_64_H +#define __ASM_SH_CHECKSUM_64_H + +/* + * include/asm-sh/checksum_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * Note: when you get a NULL pointer exception here this means someone + * passed in an incorrect kernel address to one of these functions. + * + * If you use these functions directly please don't forget the + * access_ok(). + */ + + +__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, + __wsum sum); + +__wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *err_ptr); + +static inline __sum16 csum_fold(__wsum csum) +{ + u32 sum = (__force u32)csum; + sum = (sum & 0xffff) + (sum >> 16); + sum = (sum & 0xffff) + (sum >> 16); + return (__force __sum16)~sum; +} + +__sum16 ip_fast_csum(const void *iph, unsigned int ihl); + +__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, unsigned short proto, + __wsum sum); + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#endif /* __ASM_SH_CHECKSUM_64_H */ diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h new file mode 100644 index 000000000000..720dfab7b15e --- /dev/null +++ b/arch/sh/include/asm/clock.h @@ -0,0 +1,97 @@ +#ifndef __ASM_SH_CLOCK_H +#define __ASM_SH_CLOCK_H + +#include +#include +#include +#include +#include + +struct clk; + +struct clk_ops { + void (*init)(struct clk *clk); + void (*enable)(struct clk *clk); + void (*disable)(struct clk *clk); + void (*recalc)(struct clk *clk); + int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id); + long (*round_rate)(struct clk *clk, unsigned long rate); +}; + +struct clk { + struct list_head node; + const char *name; + int id; + struct module *owner; + + struct clk *parent; + struct clk_ops *ops; + + struct kref kref; + + unsigned long rate; + unsigned long flags; + unsigned long arch_flags; +}; + +#define CLK_ALWAYS_ENABLED (1 << 0) +#define CLK_RATE_PROPAGATES (1 << 1) + +/* Should be defined by processor-specific code */ +void arch_init_clk_ops(struct clk_ops **, int type); + +/* arch/sh/kernel/cpu/clock.c */ +int clk_init(void); + +void clk_recalc_rate(struct clk *); + +int clk_register(struct clk *); +void clk_unregister(struct clk *); + +static inline int clk_always_enable(const char *id) +{ + struct clk *clk; + int ret; + + clk = clk_get(NULL, id); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = clk_enable(clk); + if (ret) + clk_put(clk); + + return ret; +} + +/* the exported API, in addition to clk_set_rate */ +/** + * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter + * @clk: clock source + * @rate: desired clock rate in Hz + * @algo_id: algorithm id to be passed down to ops->set_rate + * + * Returns success (0) or negative errno. + */ +int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id); + +enum clk_sh_algo_id { + NO_CHANGE = 0, + + IUS_N1_N1, + IUS_322, + IUS_522, + IUS_N11, + + SB_N1, + + SB3_N1, + SB3_32, + SB3_43, + SB3_54, + + BP_N1, + + IP_N1, +}; +#endif /* __ASM_SH_CLOCK_H */ diff --git a/arch/sh/include/asm/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h new file mode 100644 index 000000000000..e2681abe764f --- /dev/null +++ b/arch/sh/include/asm/cmpxchg-grb.h @@ -0,0 +1,70 @@ +#ifndef __ASM_SH_CMPXCHG_GRB_H +#define __ASM_SH_CMPXCHG_GRB_H + +static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) +{ + unsigned long retval; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " nop \n\t" + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-4, r15 \n\t" /* LOGIN */ + " mov.l @%1, %0 \n\t" /* load old value */ + " mov.l %2, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (retval), + "+r" (m) + : "r" (val) + : "memory", "r0", "r1"); + + return retval; +} + +static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) +{ + unsigned long retval; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN */ + " mov.b @%1, %0 \n\t" /* load old value */ + " extu.b %0, %0 \n\t" /* extend as unsigned */ + " mov.b %2, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (retval), + "+r" (m) + : "r" (val) + : "memory" , "r0", "r1"); + + return retval; +} + +static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old, + unsigned long new) +{ + unsigned long retval; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " nop \n\t" + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-8, r15 \n\t" /* LOGIN */ + " mov.l @%1, %0 \n\t" /* load old value */ + " cmp/eq %0, %2 \n\t" + " bf 1f \n\t" /* if not equal */ + " mov.l %2, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (retval), + "+r" (m) + : "r" (new) + : "memory" , "r0", "r1", "t"); + + return retval; +} + +#endif /* __ASM_SH_CMPXCHG_GRB_H */ diff --git a/arch/sh/include/asm/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h new file mode 100644 index 000000000000..43049ec0554b --- /dev/null +++ b/arch/sh/include/asm/cmpxchg-irq.h @@ -0,0 +1,40 @@ +#ifndef __ASM_SH_CMPXCHG_IRQ_H +#define __ASM_SH_CMPXCHG_IRQ_H + +static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) +{ + unsigned long flags, retval; + + local_irq_save(flags); + retval = *m; + *m = val; + local_irq_restore(flags); + return retval; +} + +static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) +{ + unsigned long flags, retval; + + local_irq_save(flags); + retval = *m; + *m = val & 0xff; + local_irq_restore(flags); + return retval; +} + +static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old, + unsigned long new) +{ + __u32 retval; + unsigned long flags; + + local_irq_save(flags); + retval = *m; + if (retval == old) + *m = new; + local_irq_restore(flags); /* implies memory barrier */ + return retval; +} + +#endif /* __ASM_SH_CMPXCHG_IRQ_H */ diff --git a/arch/sh/include/asm/cpu-features.h b/arch/sh/include/asm/cpu-features.h new file mode 100644 index 000000000000..86308aa39731 --- /dev/null +++ b/arch/sh/include/asm/cpu-features.h @@ -0,0 +1,25 @@ +#ifndef __ASM_SH_CPU_FEATURES_H +#define __ASM_SH_CPU_FEATURES_H + +/* + * Processor flags + * + * Note: When adding a new flag, keep cpu_flags[] in + * arch/sh/kernel/setup.c in sync so symbolic name + * mapping of the processor flags has a chance of being + * reasonably accurate. + * + * These flags are also available through the ELF + * auxiliary vector as AT_HWCAP. + */ +#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */ +#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */ +#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */ +#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */ +#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */ +#define CPU_HAS_PTEA 0x0020 /* PTEA register */ +#define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */ +#define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */ +#define CPU_HAS_OP32 0x0100 /* 32-bit instruction support */ + +#endif /* __ASM_SH_CPU_FEATURES_H */ diff --git a/arch/sh/include/asm/cputime.h b/arch/sh/include/asm/cputime.h new file mode 100644 index 000000000000..6ca395d1393e --- /dev/null +++ b/arch/sh/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __SH_CPUTIME_H +#define __SH_CPUTIME_H + +#include + +#endif /* __SH_CPUTIME_H */ diff --git a/arch/sh/include/asm/current.h b/arch/sh/include/asm/current.h new file mode 100644 index 000000000000..62b63880b333 --- /dev/null +++ b/arch/sh/include/asm/current.h @@ -0,0 +1,20 @@ +#ifndef __ASM_SH_CURRENT_H +#define __ASM_SH_CURRENT_H + +/* + * Copyright (C) 1999 Niibe Yutaka + * + */ + +#include + +struct task_struct; + +static __inline__ struct task_struct * get_current(void) +{ + return current_thread_info()->task; +} + +#define current get_current() + +#endif /* __ASM_SH_CURRENT_H */ diff --git a/arch/sh/include/asm/delay.h b/arch/sh/include/asm/delay.h new file mode 100644 index 000000000000..4b16bf9b56bd --- /dev/null +++ b/arch/sh/include/asm/delay.h @@ -0,0 +1,26 @@ +#ifndef __ASM_SH_DELAY_H +#define __ASM_SH_DELAY_H + +/* + * Copyright (C) 1993 Linus Torvalds + * + * Delay routines calling functions in arch/sh/lib/delay.c + */ + +extern void __bad_udelay(void); +extern void __bad_ndelay(void); + +extern void __udelay(unsigned long usecs); +extern void __ndelay(unsigned long nsecs); +extern void __const_udelay(unsigned long xloops); +extern void __delay(unsigned long loops); + +#define udelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \ + __udelay(n)) + +#define ndelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \ + __ndelay(n)) + +#endif /* __ASM_SH_DELAY_H */ diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h new file mode 100644 index 000000000000..efd511d0803a --- /dev/null +++ b/arch/sh/include/asm/device.h @@ -0,0 +1,12 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include + +struct platform_device; +/* allocate contiguous memory chunk and fill in struct resource */ +int platform_resource_setup_memory(struct platform_device *pdev, + char *name, unsigned long memsize); + diff --git a/arch/sh/include/asm/div64.h b/arch/sh/include/asm/div64.h new file mode 100644 index 000000000000..6cd978cefb28 --- /dev/null +++ b/arch/sh/include/asm/div64.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h new file mode 100644 index 000000000000..6c0b8a2de143 --- /dev/null +++ b/arch/sh/include/asm/dma-mapping.h @@ -0,0 +1,192 @@ +#ifndef __ASM_SH_DMA_MAPPING_H +#define __ASM_SH_DMA_MAPPING_H + +#include +#include +#include +#include + +extern struct bus_type pci_bus_type; + +#define dma_supported(dev, mask) (1) + +static inline int dma_set_mask(struct device *dev, u64 mask) +{ + if (!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + + *dev->dma_mask = mask; + + return 0; +} + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); + +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + +void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction dir); + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) +#define dma_is_consistent(d, h) (1) + +static inline dma_addr_t dma_map_single(struct device *dev, + void *ptr, size_t size, + enum dma_data_direction dir) +{ +#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) + if (dev->bus == &pci_bus_type) + return virt_to_phys(ptr); +#endif + dma_cache_sync(dev, ptr, size, dir); + + return virt_to_phys(ptr); +} + +#define dma_unmap_single(dev, addr, size, dir) do { } while (0) + +static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir) +{ + int i; + + for (i = 0; i < nents; i++) { +#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) + dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); +#endif + sg[i].dma_address = sg_phys(&sg[i]); + } + + return nents; +} + +#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0) + +static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ + return dma_map_single(dev, page_address(page) + offset, size, dir); +} + +static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, enum dma_data_direction dir) +{ + dma_unmap_single(dev, dma_address, size, dir); +} + +static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction dir) +{ +#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) + if (dev->bus == &pci_bus_type) + return; +#endif + dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir); +} + +static inline void dma_sync_single_range(struct device *dev, + dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ +#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) + if (dev->bus == &pci_bus_type) + return; +#endif + dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir); +} + +static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction dir) +{ + int i; + + for (i = 0; i < nelems; i++) { +#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) + dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); +#endif + sg[i].dma_address = sg_phys(&sg[i]); + } +} + +static inline void dma_sync_single_for_cpu(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction dir) +{ + dma_sync_single(dev, dma_handle, size, dir); +} + +static inline void dma_sync_single_for_device(struct device *dev, + dma_addr_t dma_handle, + size_t size, + enum dma_data_direction dir) +{ + dma_sync_single(dev, dma_handle, size, dir); +} + +static inline void dma_sync_single_range_for_cpu(struct device *dev, + dma_addr_t dma_handle, + unsigned long offset, + size_t size, + enum dma_data_direction direction) +{ + dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction); +} + +static inline void dma_sync_single_range_for_device(struct device *dev, + dma_addr_t dma_handle, + unsigned long offset, + size_t size, + enum dma_data_direction direction) +{ + dma_sync_single_for_device(dev, dma_handle+offset, size, direction); +} + + +static inline void dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sg, int nelems, + enum dma_data_direction dir) +{ + dma_sync_sg(dev, sg, nelems, dir); +} + +static inline void dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sg, int nelems, + enum dma_data_direction dir) +{ + dma_sync_sg(dev, sg, nelems, dir); +} + + +static inline int dma_get_cache_alignment(void) +{ + /* + * Each processor family will define its own L1_CACHE_SHIFT, + * L1_CACHE_BYTES wraps to this, so this is always safe. + */ + return L1_CACHE_BYTES; +} + +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return dma_addr == 0; +} + +#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY + +extern int +dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, + dma_addr_t device_addr, size_t size, int flags); + +extern void +dma_release_declared_memory(struct device *dev); + +extern void * +dma_mark_declared_memory_occupied(struct device *dev, + dma_addr_t device_addr, size_t size); + +#endif /* __ASM_SH_DMA_MAPPING_H */ diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h new file mode 100644 index 000000000000..beca7128e2ab --- /dev/null +++ b/arch/sh/include/asm/dma.h @@ -0,0 +1,166 @@ +/* + * include/asm-sh/dma.h + * + * Copyright (C) 2003, 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_DMA_H +#define __ASM_SH_DMA_H +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +/* The maximum address that we can perform a DMA transfer to on this platform */ +/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any + occurrence should be flagged as an error. */ +/* But... */ +/* XXX: This is not applicable to SuperH, just needed for alloc_bootmem */ +#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x10000000) + +#ifdef CONFIG_NR_DMA_CHANNELS +# define MAX_DMA_CHANNELS (CONFIG_NR_DMA_CHANNELS) +#else +# define MAX_DMA_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS) +#endif + +/* + * Read and write modes can mean drastically different things depending on the + * channel configuration. Consult your DMAC documentation and module + * implementation for further clues. + */ +#define DMA_MODE_READ 0x00 +#define DMA_MODE_WRITE 0x01 +#define DMA_MODE_MASK 0x01 + +#define DMA_AUTOINIT 0x10 + +/* + * DMAC (dma_info) flags + */ +enum { + DMAC_CHANNELS_CONFIGURED = 0x01, + DMAC_CHANNELS_TEI_CAPABLE = 0x02, /* Transfer end interrupt */ +}; + +/* + * DMA channel capabilities / flags + */ +enum { + DMA_CONFIGURED = 0x01, + + /* + * Transfer end interrupt, inherited from DMAC. + * wait_queue used in dma_wait_for_completion. + */ + DMA_TEI_CAPABLE = 0x02, +}; + +extern spinlock_t dma_spin_lock; + +struct dma_channel; + +struct dma_ops { + int (*request)(struct dma_channel *chan); + void (*free)(struct dma_channel *chan); + + int (*get_residue)(struct dma_channel *chan); + int (*xfer)(struct dma_channel *chan); + int (*configure)(struct dma_channel *chan, unsigned long flags); + int (*extend)(struct dma_channel *chan, unsigned long op, void *param); +}; + +struct dma_channel { + char dev_id[16]; /* unique name per DMAC of channel */ + + unsigned int chan; /* DMAC channel number */ + unsigned int vchan; /* Virtual channel number */ + + unsigned int mode; + unsigned int count; + + unsigned long sar; + unsigned long dar; + + const char **caps; + + unsigned long flags; + atomic_t busy; + + wait_queue_head_t wait_queue; + + struct sys_device dev; + void *priv_data; +}; + +struct dma_info { + struct platform_device *pdev; + + const char *name; + unsigned int nr_channels; + unsigned long flags; + + struct dma_ops *ops; + struct dma_channel *channels; + + struct list_head list; + int first_channel_nr; + int first_vchannel_nr; +}; + +struct dma_chan_caps { + int ch_num; + const char **caplist; +}; + +#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev) + +/* arch/sh/drivers/dma/dma-api.c */ +extern int dma_xfer(unsigned int chan, unsigned long from, + unsigned long to, size_t size, unsigned int mode); + +#define dma_write(chan, from, to, size) \ + dma_xfer(chan, from, to, size, DMA_MODE_WRITE) +#define dma_write_page(chan, from, to) \ + dma_write(chan, from, to, PAGE_SIZE) + +#define dma_read(chan, from, to, size) \ + dma_xfer(chan, from, to, size, DMA_MODE_READ) +#define dma_read_page(chan, from, to) \ + dma_read(chan, from, to, PAGE_SIZE) + +extern int request_dma_bycap(const char **dmac, const char **caps, + const char *dev_id); +extern int request_dma(unsigned int chan, const char *dev_id); +extern void free_dma(unsigned int chan); +extern int get_dma_residue(unsigned int chan); +extern struct dma_info *get_dma_info(unsigned int chan); +extern struct dma_channel *get_dma_channel(unsigned int chan); +extern void dma_wait_for_completion(unsigned int chan); +extern void dma_configure_channel(unsigned int chan, unsigned long flags); + +extern int register_dmac(struct dma_info *info); +extern void unregister_dmac(struct dma_info *info); +extern struct dma_info *get_dma_info_by_name(const char *dmac_name); + +extern int dma_extend(unsigned int chan, unsigned long op, void *param); +extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist); + +/* arch/sh/drivers/dma/dma-sysfs.c */ +extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *); +extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *); + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_DMA_H */ diff --git a/arch/sh/include/asm/dmabrg.h b/arch/sh/include/asm/dmabrg.h new file mode 100644 index 000000000000..c5edba216cf1 --- /dev/null +++ b/arch/sh/include/asm/dmabrg.h @@ -0,0 +1,23 @@ +/* + * SH7760 DMABRG (USB/Audio) support + */ + +#ifndef _DMABRG_H_ +#define _DMABRG_H_ + +/* IRQ sources */ +#define DMABRGIRQ_USBDMA 0 +#define DMABRGIRQ_USBDMAERR 1 +#define DMABRGIRQ_A0TXF 2 +#define DMABRGIRQ_A0TXH 3 +#define DMABRGIRQ_A0RXF 4 +#define DMABRGIRQ_A0RXH 5 +#define DMABRGIRQ_A1TXF 6 +#define DMABRGIRQ_A1TXH 7 +#define DMABRGIRQ_A1RXF 8 +#define DMABRGIRQ_A1RXH 9 + +extern int dmabrg_request_irq(unsigned int, void(*)(void *), void *); +extern void dmabrg_free_irq(unsigned int); + +#endif diff --git a/arch/sh/include/asm/edosk7705.h b/arch/sh/include/asm/edosk7705.h new file mode 100644 index 000000000000..5bdc9d9be3de --- /dev/null +++ b/arch/sh/include/asm/edosk7705.h @@ -0,0 +1,30 @@ +/* + * include/asm-sh/edosk7705.h + * + * Modified version of io_se.h for the EDOSK7705 specific functions. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * IO functions for an Hitachi EDOSK7705 development board + */ + +#ifndef __ASM_SH_EDOSK7705_IO_H +#define __ASM_SH_EDOSK7705_IO_H + +#include + +extern unsigned char sh_edosk7705_inb(unsigned long port); +extern unsigned int sh_edosk7705_inl(unsigned long port); + +extern void sh_edosk7705_outb(unsigned char value, unsigned long port); +extern void sh_edosk7705_outl(unsigned int value, unsigned long port); + +extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count); +extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count); +extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count); +extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count); + +extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset); + +#endif /* __ASM_SH_EDOSK7705_IO_H */ diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h new file mode 100644 index 000000000000..f01449a8d378 --- /dev/null +++ b/arch/sh/include/asm/elf.h @@ -0,0 +1,244 @@ +#ifndef __ASM_SH_ELF_H +#define __ASM_SH_ELF_H + +#include +#include +#include +#include + +/* ELF header e_flags defines */ +#define EF_SH_PIC 0x100 /* -fpic */ +#define EF_SH_FDPIC 0x8000 /* -mfdpic */ + +/* SH (particularly SHcompact) relocation types */ +#define R_SH_NONE 0 +#define R_SH_DIR32 1 +#define R_SH_REL32 2 +#define R_SH_DIR8WPN 3 +#define R_SH_IND12W 4 +#define R_SH_DIR8WPL 5 +#define R_SH_DIR8WPZ 6 +#define R_SH_DIR8BP 7 +#define R_SH_DIR8W 8 +#define R_SH_DIR8L 9 +#define R_SH_SWITCH16 25 +#define R_SH_SWITCH32 26 +#define R_SH_USES 27 +#define R_SH_COUNT 28 +#define R_SH_ALIGN 29 +#define R_SH_CODE 30 +#define R_SH_DATA 31 +#define R_SH_LABEL 32 +#define R_SH_SWITCH8 33 +#define R_SH_GNU_VTINHERIT 34 +#define R_SH_GNU_VTENTRY 35 +#define R_SH_TLS_GD_32 144 +#define R_SH_TLS_LD_32 145 +#define R_SH_TLS_LDO_32 146 +#define R_SH_TLS_IE_32 147 +#define R_SH_TLS_LE_32 148 +#define R_SH_TLS_DTPMOD32 149 +#define R_SH_TLS_DTPOFF32 150 +#define R_SH_TLS_TPOFF32 151 +#define R_SH_GOT32 160 +#define R_SH_PLT32 161 +#define R_SH_COPY 162 +#define R_SH_GLOB_DAT 163 +#define R_SH_JMP_SLOT 164 +#define R_SH_RELATIVE 165 +#define R_SH_GOTOFF 166 +#define R_SH_GOTPC 167 + +/* FDPIC relocs */ +#define R_SH_GOT20 70 +#define R_SH_GOTOFF20 71 +#define R_SH_GOTFUNCDESC 72 +#define R_SH_GOTFUNCDESC20 73 +#define R_SH_GOTOFFFUNCDESC 74 +#define R_SH_GOTOFFFUNCDESC20 75 +#define R_SH_FUNCDESC 76 +#define R_SH_FUNCDESC_VALUE 77 + +#if 0 /* XXX - later .. */ +#define R_SH_GOT20 198 +#define R_SH_GOTOFF20 199 +#define R_SH_GOTFUNCDESC 200 +#define R_SH_GOTFUNCDESC20 201 +#define R_SH_GOTOFFFUNCDESC 202 +#define R_SH_GOTOFFFUNCDESC20 203 +#define R_SH_FUNCDESC 204 +#define R_SH_FUNCDESC_VALUE 205 +#endif + +/* SHmedia relocs */ +#define R_SH_IMM_LOW16 246 +#define R_SH_IMM_LOW16_PCREL 247 +#define R_SH_IMM_MEDLOW16 248 +#define R_SH_IMM_MEDLOW16_PCREL 249 +/* Keep this the last entry. */ +#define R_SH_NUM 256 + +/* + * ELF register definitions.. + */ + +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_fpu_struct elf_fpregset_t; + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#ifdef __LITTLE_ENDIAN__ +#define ELF_DATA ELFDATA2LSB +#else +#define ELF_DATA ELFDATA2MSB +#endif +#define ELF_ARCH EM_SH + +#ifdef __KERNEL__ +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_SH) +#define elf_check_fdpic(x) ((x)->e_flags & EF_SH_FDPIC) +#define elf_check_const_displacement(x) ((x)->e_flags & EF_SH_PIC) + +#define USE_ELF_CORE_DUMP +#define ELF_FDPIC_CORE_EFLAGS EF_SH_FDPIC +#define ELF_EXEC_PAGESIZE PAGE_SIZE + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) + +#define ELF_CORE_COPY_REGS(_dest,_regs) \ + memcpy((char *) &_dest, (char *) _regs, \ + sizeof(struct pt_regs)); + +/* This yields a mask that user programs can use to figure out what + instruction set this CPU supports. This could be done in user space, + but it's not easy, and we've already done it here. */ + +#define ELF_HWCAP (boot_cpu_data.flags) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. + + For the moment, we have only optimizations for the Intel generations, + but that could change... */ + +#define ELF_PLATFORM (utsname()->machine) + +#ifdef __SH5__ +#define ELF_PLAT_INIT(_r, load_addr) \ + do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ + _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ + _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ + _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \ + _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \ + _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \ + _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \ + _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \ + _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \ + _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \ + _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \ + _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \ + _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \ + _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \ + _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \ + _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \ + _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \ + _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \ + _r->sr = SR_FD | SR_MMU; } while (0) +#else +#define ELF_PLAT_INIT(_r, load_addr) \ + do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ + _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ + _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ + _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \ + _r->sr = SR_FD; } while (0) + +#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, \ + _dynamic_addr) \ +do { \ + _r->regs[0] = 0; \ + _r->regs[1] = 0; \ + _r->regs[2] = 0; \ + _r->regs[3] = 0; \ + _r->regs[4] = 0; \ + _r->regs[5] = 0; \ + _r->regs[6] = 0; \ + _r->regs[7] = 0; \ + _r->regs[8] = _exec_map_addr; \ + _r->regs[9] = _interp_map_addr; \ + _r->regs[10] = _dynamic_addr; \ + _r->regs[11] = 0; \ + _r->regs[12] = 0; \ + _r->regs[13] = 0; \ + _r->regs[14] = 0; \ + _r->sr = SR_FD; \ +} while (0) +#endif + +#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) +struct task_struct; +extern int dump_task_regs (struct task_struct *, elf_gregset_t *); +extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *); + +#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) +#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs) + +#ifdef CONFIG_VSYSCALL +/* vDSO has arch_setup_additional_pages */ +#define ARCH_HAS_SETUP_ADDITIONAL_PAGES +struct linux_binprm; +extern int arch_setup_additional_pages(struct linux_binprm *bprm, + int executable_stack); + +extern unsigned int vdso_enabled; +extern void __kernel_vsyscall; + +#define VDSO_BASE ((unsigned long)current->mm->context.vdso) +#define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x)) + +#define VSYSCALL_AUX_ENT \ + if (vdso_enabled) \ + NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); +#else +#define VSYSCALL_AUX_ENT +#endif /* CONFIG_VSYSCALL */ + +#ifdef CONFIG_SH_FPU +#define FPU_AUX_ENT NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT) +#else +#define FPU_AUX_ENT +#endif + +extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape; + +/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */ +#define ARCH_DLINFO \ +do { \ + /* Optional FPU initialization */ \ + FPU_AUX_ENT; \ + \ + /* Optional vsyscall entry */ \ + VSYSCALL_AUX_ENT; \ + \ + /* Cache desc */ \ + NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape); \ + NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape); \ + NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape); \ +} while (0) + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_ELF_H */ diff --git a/arch/sh/include/asm/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h new file mode 100644 index 000000000000..108d8c48e42e --- /dev/null +++ b/arch/sh/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S new file mode 100644 index 000000000000..2dab0b8d9454 --- /dev/null +++ b/arch/sh/include/asm/entry-macros.S @@ -0,0 +1,33 @@ +! entry.S macro define + + .macro cli + stc sr, r0 + or #0xf0, r0 + ldc r0, sr + .endm + + .macro sti + mov #0xf0, r11 + extu.b r11, r11 + not r11, r11 + stc sr, r10 + and r11, r10 +#ifdef CONFIG_CPU_HAS_SR_RB + stc k_g_imask, r11 + or r11, r10 +#endif + ldc r10, sr + .endm + + .macro get_current_thread_info, ti, tmp +#ifdef CONFIG_CPU_HAS_SR_RB + stc r7_bank, \ti +#else + mov #((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp + shll8 \tmp + shll2 \tmp + mov r15, \ti + and \tmp, \ti +#endif + .endm + diff --git a/arch/sh/include/asm/errno.h b/arch/sh/include/asm/errno.h new file mode 100644 index 000000000000..51cf6f9cebb8 --- /dev/null +++ b/arch/sh/include/asm/errno.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_ERRNO_H +#define __ASM_SH_ERRNO_H + +#include + +#endif /* __ASM_SH_ERRNO_H */ diff --git a/arch/sh/include/asm/fb.h b/arch/sh/include/asm/fb.h new file mode 100644 index 000000000000..d92e99cd8c8a --- /dev/null +++ b/arch/sh/include/asm/fb.h @@ -0,0 +1,19 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include +#include +#include + +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); +} + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/sh/include/asm/fcntl.h b/arch/sh/include/asm/fcntl.h new file mode 100644 index 000000000000..46ab12db5739 --- /dev/null +++ b/arch/sh/include/asm/fcntl.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/asm/fixmap.h b/arch/sh/include/asm/fixmap.h new file mode 100644 index 000000000000..721fcc4d5e98 --- /dev/null +++ b/arch/sh/include/asm/fixmap.h @@ -0,0 +1,117 @@ +/* + * fixmap.h: compile-time virtual memory allocation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Ingo Molnar + * + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 + */ + +#ifndef _ASM_FIXMAP_H +#define _ASM_FIXMAP_H + +#include +#include +#ifdef CONFIG_HIGHMEM +#include +#include +#endif + +/* + * Here we define all the compile-time 'special' virtual + * addresses. The point is to have a constant address at + * compile time, but to set the physical address only + * in the boot process. We allocate these special addresses + * from the end of P3 backwards. + * Also this lets us do fail-safe vmalloc(), we + * can guarantee that these special addresses and + * vmalloc()-ed addresses never overlap. + * + * these 'compile-time allocated' memory buffers are + * fixed-size 4k pages. (or larger if used with an increment + * highger than 1) use fixmap_set(idx,phys) to associate + * physical memory with fixmap indices. + * + * TLB entries of such buffers will not be flushed across + * task switches. + */ + +/* + * on UP currently we will have no trace of the fixmap mechanizm, + * no page table allocations, etc. This might change in the + * future, say framebuffers for the console driver(s) could be + * fix-mapped? + */ +enum fixed_addresses { +#define FIX_N_COLOURS 16 + FIX_CMAP_BEGIN, + FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS, + FIX_UNCACHED, +#ifdef CONFIG_HIGHMEM + FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ + FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, +#endif + __end_of_fixed_addresses +}; + +extern void __set_fixmap(enum fixed_addresses idx, + unsigned long phys, pgprot_t flags); + +#define set_fixmap(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL) +/* + * Some hardware wants to get fixmapped without caching. + */ +#define set_fixmap_nocache(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) +/* + * used by vmalloc.c. + * + * Leave one empty page between vmalloc'ed areas and + * the start of the fixmap, and leave one page empty + * at the top of mem.. + */ +#ifdef CONFIG_SUPERH32 +#define FIXADDR_TOP (P4SEG - PAGE_SIZE) +#else +#define FIXADDR_TOP (0xff000000 - PAGE_SIZE) +#endif +#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) + +#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) +#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) + +extern void __this_fixmap_does_not_exist(void); + +/* + * 'index to address' translation. If anyone tries to use the idx + * directly without tranlation, we catch the bug with a NULL-deference + * kernel oops. Illegal ranges of incoming indices are caught too. + */ +static inline unsigned long fix_to_virt(const unsigned int idx) +{ + /* + * this branch gets completely eliminated after inlining, + * except when someone tries to use fixaddr indices in an + * illegal way. (such as mixing up address types or using + * out-of-range indices). + * + * If it doesn't get removed, the linker will complain + * loudly with a reasonably clear error message.. + */ + if (idx >= __end_of_fixed_addresses) + __this_fixmap_does_not_exist(); + + return __fix_to_virt(idx); +} + +static inline unsigned long virt_to_fix(const unsigned long vaddr) +{ + BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); + return __virt_to_fix(vaddr); +} +#endif diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h new file mode 100644 index 000000000000..0cc800299e06 --- /dev/null +++ b/arch/sh/include/asm/flat.h @@ -0,0 +1,24 @@ +/* + * include/asm-sh/flat.h + * + * uClinux flat-format executables + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive for + * more details. + */ +#ifndef __ASM_SH_FLAT_H +#define __ASM_SH_FLAT_H + +#define flat_stack_align(sp) /* nothing needed */ +#define flat_argvp_envp_on_stack() 0 +#define flat_old_ram_flag(flags) (flags) +#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) +#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp) +#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) +#define flat_get_relocate_addr(rel) (rel) +#define flat_set_persistent(relval, p) ({ (void)p; 0; }) + +#endif /* __ASM_SH_FLAT_H */ diff --git a/arch/sh/include/asm/fpu.h b/arch/sh/include/asm/fpu.h new file mode 100644 index 000000000000..91462fea1507 --- /dev/null +++ b/arch/sh/include/asm/fpu.h @@ -0,0 +1,55 @@ +#ifndef __ASM_SH_FPU_H +#define __ASM_SH_FPU_H + +#ifndef __ASSEMBLY__ +#include +#include + +#ifdef CONFIG_SH_FPU +static inline void release_fpu(struct pt_regs *regs) +{ + regs->sr |= SR_FD; +} + +static inline void grab_fpu(struct pt_regs *regs) +{ + regs->sr &= ~SR_FD; +} + +struct task_struct; + +extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs); +#else + +#define release_fpu(regs) do { } while (0) +#define grab_fpu(regs) do { } while (0) + +static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + clear_tsk_thread_flag(tsk, TIF_USEDFPU); +} +#endif + +extern int do_fpu_inst(unsigned short, struct pt_regs *); + +static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + preempt_disable(); + if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) + save_fpu(tsk, regs); + preempt_enable(); +} + +static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + preempt_disable(); + if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { + clear_tsk_thread_flag(tsk, TIF_USEDFPU); + release_fpu(regs); + } + preempt_enable(); +} + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_SH_FPU_H */ diff --git a/arch/sh/include/asm/freq.h b/arch/sh/include/asm/freq.h new file mode 100644 index 000000000000..4ece90b09b9c --- /dev/null +++ b/arch/sh/include/asm/freq.h @@ -0,0 +1,18 @@ +/* + * include/asm-sh/freq.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __ASM_SH_FREQ_H +#define __ASM_SH_FREQ_H +#ifdef __KERNEL__ + +#include + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_FREQ_H */ diff --git a/arch/sh/include/asm/futex-irq.h b/arch/sh/include/asm/futex-irq.h new file mode 100644 index 000000000000..a9f16a7f9aea --- /dev/null +++ b/arch/sh/include/asm/futex-irq.h @@ -0,0 +1,111 @@ +#ifndef __ASM_SH_FUTEX_IRQ_H +#define __ASM_SH_FUTEX_IRQ_H + +#include + +static inline int atomic_futex_op_xchg_set(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_add(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval + oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_or(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval | oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_and(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval & oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_xor(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval ^ oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_cmpxchg_inatomic(int __user *uaddr, + int oldval, int newval) +{ + unsigned long flags; + int ret, prev = 0; + + local_irq_save(flags); + + ret = get_user(prev, uaddr); + if (!ret && oldval == prev) + ret = put_user(newval, uaddr); + + local_irq_restore(flags); + + if (ret) + return ret; + + return prev; +} + +#endif /* __ASM_SH_FUTEX_IRQ_H */ diff --git a/arch/sh/include/asm/futex.h b/arch/sh/include/asm/futex.h new file mode 100644 index 000000000000..68256ec5fa35 --- /dev/null +++ b/arch/sh/include/asm/futex.h @@ -0,0 +1,77 @@ +#ifndef __ASM_SH_FUTEX_H +#define __ASM_SH_FUTEX_H + +#ifdef __KERNEL__ + +#include +#include +#include + +/* XXX: UP variants, fix for SH-4A and SMP.. */ +#include + +static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + ret = atomic_futex_op_xchg_set(oparg, uaddr, &oldval); + break; + case FUTEX_OP_ADD: + ret = atomic_futex_op_xchg_add(oparg, uaddr, &oldval); + break; + case FUTEX_OP_OR: + ret = atomic_futex_op_xchg_or(oparg, uaddr, &oldval); + break; + case FUTEX_OP_ANDN: + ret = atomic_futex_op_xchg_and(~oparg, uaddr, &oldval); + break; + case FUTEX_OP_XOR: + ret = atomic_futex_op_xchg_xor(oparg, uaddr, &oldval); + break; + default: + ret = -ENOSYS; + break; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + return atomic_futex_op_cmpxchg_inatomic(uaddr, oldval, newval); +} + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_FUTEX_H */ diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h new file mode 100644 index 000000000000..cf32bd2df881 --- /dev/null +++ b/arch/sh/include/asm/gpio.h @@ -0,0 +1,19 @@ +/* + * include/asm-sh/gpio.h + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * Addresses for the Pin Function Controller + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_GPIO_H +#define __ASM_SH_GPIO_H + +#if defined(CONFIG_CPU_SH3) +#include +#endif + +#endif /* __ASM_SH_GPIO_H */ diff --git a/arch/sh/include/asm/hardirq.h b/arch/sh/include/asm/hardirq.h new file mode 100644 index 000000000000..715ee237fc77 --- /dev/null +++ b/arch/sh/include/asm/hardirq.h @@ -0,0 +1,16 @@ +#ifndef __ASM_SH_HARDIRQ_H +#define __ASM_SH_HARDIRQ_H + +#include +#include + +/* entry.S is sensitive to the offsets of these fields */ +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +extern void ack_bad_irq(unsigned int irq); + +#endif /* __ASM_SH_HARDIRQ_H */ diff --git a/arch/sh/include/asm/hd64461.h b/arch/sh/include/asm/hd64461.h new file mode 100644 index 000000000000..8c1353baf00f --- /dev/null +++ b/arch/sh/include/asm/hd64461.h @@ -0,0 +1,250 @@ +#ifndef __ASM_SH_HD64461 +#define __ASM_SH_HD64461 +/* + * Copyright (C) 2007 Kristoffer Ericson + * Copyright (C) 2004 Paul Mundt + * Copyright (C) 2000 YAEGASHI Takeshi + * + * Hitachi HD64461 companion chip support + * (please note manual reference 0x10000000 = 0xb0000000) + */ + +/* Constants for PCMCIA mappings */ +#define HD64461_PCC_WINDOW 0x01000000 + +/* Area 6 - Slot 0 - memory and/or IO card */ +#define HD64461_PCC0_BASE (CONFIG_HD64461_IOBASE + 0x8000000) +#define HD64461_PCC0_ATTR (HD64461_PCC0_BASE) /* 0xb80000000 */ +#define HD64461_PCC0_COMM (HD64461_PCC0_BASE+HD64461_PCC_WINDOW) /* 0xb90000000 */ +#define HD64461_PCC0_IO (HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW) /* 0xba0000000 */ + +/* Area 5 - Slot 1 - memory card only */ +#define HD64461_PCC1_BASE (CONFIG_HD64461_IOBASE + 0x4000000) +#define HD64461_PCC1_ATTR (HD64461_PCC1_BASE) /* 0xb4000000 */ +#define HD64461_PCC1_COMM (HD64461_PCC1_BASE+HD64461_PCC_WINDOW) /* 0xb5000000 */ + +/* Standby Control Register for HD64461 */ +#define HD64461_STBCR CONFIG_HD64461_IOBASE +#define HD64461_STBCR_CKIO_STBY 0x2000 +#define HD64461_STBCR_SAFECKE_IST 0x1000 +#define HD64461_STBCR_SLCKE_IST 0x0800 +#define HD64461_STBCR_SAFECKE_OST 0x0400 +#define HD64461_STBCR_SLCKE_OST 0x0200 +#define HD64461_STBCR_SMIAST 0x0100 +#define HD64461_STBCR_SLCDST 0x0080 +#define HD64461_STBCR_SPC0ST 0x0040 +#define HD64461_STBCR_SPC1ST 0x0020 +#define HD64461_STBCR_SAFEST 0x0010 +#define HD64461_STBCR_STM0ST 0x0008 +#define HD64461_STBCR_STM1ST 0x0004 +#define HD64461_STBCR_SIRST 0x0002 +#define HD64461_STBCR_SURTST 0x0001 + +/* System Configuration Register */ +#define HD64461_SYSCR (CONFIG_HD64461_IOBASE + 0x02) + +/* CPU Data Bus Control Register */ +#define HD64461_SCPUCR (CONFIG_HD64461_IOBASE + 0x04) + +/* Base Address Register */ +#define HD64461_LCDCBAR (CONFIG_HD64461_IOBASE + 0x1000) + +/* Line increment address */ +#define HD64461_LCDCLOR (CONFIG_HD64461_IOBASE + 0x1002) + +/* Controls LCD controller */ +#define HD64461_LCDCCR (CONFIG_HD64461_IOBASE + 0x1004) + +/* LCCDR control bits */ +#define HD64461_LCDCCR_STBACK 0x0400 /* Standby Back */ +#define HD64461_LCDCCR_STREQ 0x0100 /* Standby Request */ +#define HD64461_LCDCCR_MOFF 0x0080 /* Memory Off */ +#define HD64461_LCDCCR_REFSEL 0x0040 /* Refresh Select */ +#define HD64461_LCDCCR_EPON 0x0020 /* End Power On */ +#define HD64461_LCDCCR_SPON 0x0010 /* Start Power On */ + +/* Controls LCD (1) */ +#define HD64461_LDR1 (CONFIG_HD64461_IOBASE + 0x1010) +#define HD64461_LDR1_DON 0x01 /* Display On */ +#define HD64461_LDR1_DINV 0x80 /* Display Invert */ + +/* Controls LCD (2) */ +#define HD64461_LDR2 (CONFIG_HD64461_IOBASE + 0x1012) +#define HD64461_LDHNCR (CONFIG_HD64461_IOBASE + 0x1014) /* Number of horizontal characters */ +#define HD64461_LDHNSR (CONFIG_HD64461_IOBASE + 0x1016) /* Specify output start position + width of CL1 */ +#define HD64461_LDVNTR (CONFIG_HD64461_IOBASE + 0x1018) /* Specify total vertical lines */ +#define HD64461_LDVNDR (CONFIG_HD64461_IOBASE + 0x101a) /* specify number of display vertical lines */ +#define HD64461_LDVSPR (CONFIG_HD64461_IOBASE + 0x101c) /* specify vertical synchronization pos and AC nr */ + +/* Controls LCD (3) */ +#define HD64461_LDR3 (CONFIG_HD64461_IOBASE + 0x101e) + +/* Palette Registers */ +#define HD64461_CPTWAR (CONFIG_HD64461_IOBASE + 0x1030) /* Color Palette Write Address Register */ +#define HD64461_CPTWDR (CONFIG_HD64461_IOBASE + 0x1032) /* Color Palette Write Data Register */ +#define HD64461_CPTRAR (CONFIG_HD64461_IOBASE + 0x1034) /* Color Palette Read Address Register */ +#define HD64461_CPTRDR (CONFIG_HD64461_IOBASE + 0x1036) /* Color Palette Read Data Register */ + +#define HD64461_GRDOR (CONFIG_HD64461_IOBASE + 0x1040) /* Display Resolution Offset Register */ +#define HD64461_GRSCR (CONFIG_HD64461_IOBASE + 0x1042) /* Solid Color Register */ +#define HD64461_GRCFGR (CONFIG_HD64461_IOBASE + 0x1044) /* Accelerator Configuration Register */ + +#define HD64461_GRCFGR_ACCSTATUS 0x10 /* Accelerator Status */ +#define HD64461_GRCFGR_ACCRESET 0x08 /* Accelerator Reset */ +#define HD64461_GRCFGR_ACCSTART_BITBLT 0x06 /* Accelerator Start BITBLT */ +#define HD64461_GRCFGR_ACCSTART_LINE 0x04 /* Accelerator Start Line Drawing */ +#define HD64461_GRCFGR_COLORDEPTH16 0x01 /* Sets Colordepth 16 for Accelerator */ +#define HD64461_GRCFGR_COLORDEPTH8 0x01 /* Sets Colordepth 8 for Accelerator */ + +/* Line Drawing Registers */ +#define HD64461_LNSARH (CONFIG_HD64461_IOBASE + 0x1046) /* Line Start Address Register (H) */ +#define HD64461_LNSARL (CONFIG_HD64461_IOBASE + 0x1048) /* Line Start Address Register (L) */ +#define HD64461_LNAXLR (CONFIG_HD64461_IOBASE + 0x104a) /* Axis Pixel Length Register */ +#define HD64461_LNDGR (CONFIG_HD64461_IOBASE + 0x104c) /* Diagonal Register */ +#define HD64461_LNAXR (CONFIG_HD64461_IOBASE + 0x104e) /* Axial Register */ +#define HD64461_LNERTR (CONFIG_HD64461_IOBASE + 0x1050) /* Start Error Term Register */ +#define HD64461_LNMDR (CONFIG_HD64461_IOBASE + 0x1052) /* Line Mode Register */ + +/* BitBLT Registers */ +#define HD64461_BBTSSARH (CONFIG_HD64461_IOBASE + 0x1054) /* Source Start Address Register (H) */ +#define HD64461_BBTSSARL (CONFIG_HD64461_IOBASE + 0x1056) /* Source Start Address Register (L) */ +#define HD64461_BBTDSARH (CONFIG_HD64461_IOBASE + 0x1058) /* Destination Start Address Register (H) */ +#define HD64461_BBTDSARL (CONFIG_HD64461_IOBASE + 0x105a) /* Destination Start Address Register (L) */ +#define HD64461_BBTDWR (CONFIG_HD64461_IOBASE + 0x105c) /* Destination Block Width Register */ +#define HD64461_BBTDHR (CONFIG_HD64461_IOBASE + 0x105e) /* Destination Block Height Register */ +#define HD64461_BBTPARH (CONFIG_HD64461_IOBASE + 0x1060) /* Pattern Start Address Register (H) */ +#define HD64461_BBTPARL (CONFIG_HD64461_IOBASE + 0x1062) /* Pattern Start Address Register (L) */ +#define HD64461_BBTMARH (CONFIG_HD64461_IOBASE + 0x1064) /* Mask Start Address Register (H) */ +#define HD64461_BBTMARL (CONFIG_HD64461_IOBASE + 0x1066) /* Mask Start Address Register (L) */ +#define HD64461_BBTROPR (CONFIG_HD64461_IOBASE + 0x1068) /* ROP Register */ +#define HD64461_BBTMDR (CONFIG_HD64461_IOBASE + 0x106a) /* BitBLT Mode Register */ + +/* PC Card Controller Registers */ +/* Maps to Physical Area 6 */ +#define HD64461_PCC0ISR (CONFIG_HD64461_IOBASE + 0x2000) /* socket 0 interface status */ +#define HD64461_PCC0GCR (CONFIG_HD64461_IOBASE + 0x2002) /* socket 0 general control */ +#define HD64461_PCC0CSCR (CONFIG_HD64461_IOBASE + 0x2004) /* socket 0 card status change */ +#define HD64461_PCC0CSCIER (CONFIG_HD64461_IOBASE + 0x2006) /* socket 0 card status change interrupt enable */ +#define HD64461_PCC0SCR (CONFIG_HD64461_IOBASE + 0x2008) /* socket 0 software control */ +/* Maps to Physical Area 5 */ +#define HD64461_PCC1ISR (CONFIG_HD64461_IOBASE + 0x2010) /* socket 1 interface status */ +#define HD64461_PCC1GCR (CONFIG_HD64461_IOBASE + 0x2012) /* socket 1 general control */ +#define HD64461_PCC1CSCR (CONFIG_HD64461_IOBASE + 0x2014) /* socket 1 card status change */ +#define HD64461_PCC1CSCIER (CONFIG_HD64461_IOBASE + 0x2016) /* socket 1 card status change interrupt enable */ +#define HD64461_PCC1SCR (CONFIG_HD64461_IOBASE + 0x2018) /* socket 1 software control */ + +/* PCC Interface Status Register */ +#define HD64461_PCCISR_READY 0x80 /* card ready */ +#define HD64461_PCCISR_MWP 0x40 /* card write-protected */ +#define HD64461_PCCISR_VS2 0x20 /* voltage select pin 2 */ +#define HD64461_PCCISR_VS1 0x10 /* voltage select pin 1 */ +#define HD64461_PCCISR_CD2 0x08 /* card detect 2 */ +#define HD64461_PCCISR_CD1 0x04 /* card detect 1 */ +#define HD64461_PCCISR_BVD2 0x02 /* battery 1 */ +#define HD64461_PCCISR_BVD1 0x01 /* battery 1 */ + +#define HD64461_PCCISR_PCD_MASK 0x0c /* card detect */ +#define HD64461_PCCISR_BVD_MASK 0x03 /* battery voltage */ +#define HD64461_PCCISR_BVD_BATGOOD 0x03 /* battery good */ +#define HD64461_PCCISR_BVD_BATWARN 0x01 /* battery low warning */ +#define HD64461_PCCISR_BVD_BATDEAD1 0x02 /* battery dead */ +#define HD64461_PCCISR_BVD_BATDEAD2 0x00 /* battery dead */ + +/* PCC General Control Register */ +#define HD64461_PCCGCR_DRVE 0x80 /* output drive */ +#define HD64461_PCCGCR_PCCR 0x40 /* PC card reset */ +#define HD64461_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */ +#define HD64461_PCCGCR_VCC0 0x10 /* voltage control pin VCC0SEL0 */ +#define HD64461_PCCGCR_PMMOD 0x08 /* memory mode */ +#define HD64461_PCCGCR_PA25 0x04 /* pin A25 */ +#define HD64461_PCCGCR_PA24 0x02 /* pin A24 */ +#define HD64461_PCCGCR_REG 0x01 /* pin PCC0REG# */ + +/* PCC Card Status Change Register */ +#define HD64461_PCCCSCR_SCDI 0x80 /* sw card detect intr */ +#define HD64461_PCCCSCR_SRV1 0x40 /* reserved */ +#define HD64461_PCCCSCR_IREQ 0x20 /* IREQ intr req */ +#define HD64461_PCCCSCR_SC 0x10 /* STSCHG (status change) pin */ +#define HD64461_PCCCSCR_CDC 0x08 /* CD (card detect) change */ +#define HD64461_PCCCSCR_RC 0x04 /* READY change */ +#define HD64461_PCCCSCR_BW 0x02 /* battery warning change */ +#define HD64461_PCCCSCR_BD 0x01 /* battery dead change */ + +/* PCC Card Status Change Interrupt Enable Register */ +#define HD64461_PCCCSCIER_CRE 0x80 /* change reset enable */ +#define HD64461_PCCCSCIER_IREQE_MASK 0x60 /* IREQ enable */ +#define HD64461_PCCCSCIER_IREQE_DISABLED 0x00 /* IREQ disabled */ +#define HD64461_PCCCSCIER_IREQE_LEVEL 0x20 /* IREQ level-triggered */ +#define HD64461_PCCCSCIER_IREQE_FALLING 0x40 /* IREQ falling-edge-trig */ +#define HD64461_PCCCSCIER_IREQE_RISING 0x60 /* IREQ rising-edge-trig */ + +#define HD64461_PCCCSCIER_SCE 0x10 /* status change enable */ +#define HD64461_PCCCSCIER_CDE 0x08 /* card detect change enable */ +#define HD64461_PCCCSCIER_RE 0x04 /* ready change enable */ +#define HD64461_PCCCSCIER_BWE 0x02 /* battery warn change enable */ +#define HD64461_PCCCSCIER_BDE 0x01 /* battery dead change enable*/ + +/* PCC Software Control Register */ +#define HD64461_PCCSCR_VCC1 0x02 /* voltage control pin 1 */ +#define HD64461_PCCSCR_SWP 0x01 /* write protect */ + +/* PCC0 Output Pins Control Register */ +#define HD64461_P0OCR (CONFIG_HD64461_IOBASE + 0x202a) + +/* PCC1 Output Pins Control Register */ +#define HD64461_P1OCR (CONFIG_HD64461_IOBASE + 0x202c) + +/* PC Card General Control Register */ +#define HD64461_PGCR (CONFIG_HD64461_IOBASE + 0x202e) + +/* Port Control Registers */ +#define HD64461_GPACR (CONFIG_HD64461_IOBASE + 0x4000) /* Port A - Handles IRDA/TIMER */ +#define HD64461_GPBCR (CONFIG_HD64461_IOBASE + 0x4002) /* Port B - Handles UART */ +#define HD64461_GPCCR (CONFIG_HD64461_IOBASE + 0x4004) /* Port C - Handles PCMCIA 1 */ +#define HD64461_GPDCR (CONFIG_HD64461_IOBASE + 0x4006) /* Port D - Handles PCMCIA 1 */ + +/* Port Control Data Registers */ +#define HD64461_GPADR (CONFIG_HD64461_IOBASE + 0x4010) /* A */ +#define HD64461_GPBDR (CONFIG_HD64461_IOBASE + 0x4012) /* B */ +#define HD64461_GPCDR (CONFIG_HD64461_IOBASE + 0x4014) /* C */ +#define HD64461_GPDDR (CONFIG_HD64461_IOBASE + 0x4016) /* D */ + +/* Interrupt Control Registers */ +#define HD64461_GPAICR (CONFIG_HD64461_IOBASE + 0x4020) /* A */ +#define HD64461_GPBICR (CONFIG_HD64461_IOBASE + 0x4022) /* B */ +#define HD64461_GPCICR (CONFIG_HD64461_IOBASE + 0x4024) /* C */ +#define HD64461_GPDICR (CONFIG_HD64461_IOBASE + 0x4026) /* D */ + +/* Interrupt Status Registers */ +#define HD64461_GPAISR (CONFIG_HD64461_IOBASE + 0x4040) /* A */ +#define HD64461_GPBISR (CONFIG_HD64461_IOBASE + 0x4042) /* B */ +#define HD64461_GPCISR (CONFIG_HD64461_IOBASE + 0x4044) /* C */ +#define HD64461_GPDISR (CONFIG_HD64461_IOBASE + 0x4046) /* D */ + +/* Interrupt Request Register & Interrupt Mask Register */ +#define HD64461_NIRR (CONFIG_HD64461_IOBASE + 0x5000) +#define HD64461_NIMR (CONFIG_HD64461_IOBASE + 0x5002) + +#define HD64461_IRQBASE OFFCHIP_IRQ_BASE +#define OFFCHIP_IRQ_BASE 64 +#define HD64461_IRQ_NUM 16 + +#define HD64461_IRQ_UART (HD64461_IRQBASE+5) +#define HD64461_IRQ_IRDA (HD64461_IRQBASE+6) +#define HD64461_IRQ_TMU1 (HD64461_IRQBASE+9) +#define HD64461_IRQ_TMU0 (HD64461_IRQBASE+10) +#define HD64461_IRQ_GPIO (HD64461_IRQBASE+11) +#define HD64461_IRQ_AFE (HD64461_IRQBASE+12) +#define HD64461_IRQ_PCC1 (HD64461_IRQBASE+13) +#define HD64461_IRQ_PCC0 (HD64461_IRQBASE+14) + +#define __IO_PREFIX hd64461 +#include + +/* arch/sh/cchips/hd6446x/hd64461/setup.c */ +int hd64461_irq_demux(int irq); +void hd64461_register_irq_demux(int irq, + int (*demux) (int irq, void *dev), void *dev); +void hd64461_unregister_irq_demux(int irq); + +#endif diff --git a/arch/sh/include/asm/hd64465/gpio.h b/arch/sh/include/asm/hd64465/gpio.h new file mode 100644 index 000000000000..a3cdca2713dd --- /dev/null +++ b/arch/sh/include/asm/hd64465/gpio.h @@ -0,0 +1,46 @@ +#ifndef _ASM_SH_HD64465_GPIO_ +#define _ASM_SH_HD64465_GPIO_ 1 +/* + * $Id: gpio.h,v 1.3 2003/05/04 19:30:14 lethal Exp $ + * + * Hitachi HD64465 companion chip: General Purpose IO pins support. + * This layer enables other device drivers to configure GPIO + * pins, get and set their values, and register an interrupt + * routine for when input pins change in hardware. + * + * by Greg Banks + * (c) 2000 PocketPenguins Inc. + */ +#include + +/* Macro to construct a portpin number (used in all + * subsequent functions) from a port letter and a pin + * number, e.g. HD64465_GPIO_PORTPIN('A', 5). + */ +#define HD64465_GPIO_PORTPIN(port,pin) (((port)-'A')<<3|(pin)) + +/* Pin configuration constants for _configure() */ +#define HD64465_GPIO_FUNCTION2 0 /* use the pin's *other* function */ +#define HD64465_GPIO_OUT 1 /* output */ +#define HD64465_GPIO_IN_PULLUP 2 /* input, pull-up MOS on */ +#define HD64465_GPIO_IN 3 /* input */ + +/* Configure a pin's direction */ +extern void hd64465_gpio_configure(int portpin, int direction); + +/* Get, set value */ +extern void hd64465_gpio_set_pin(int portpin, unsigned int value); +extern unsigned int hd64465_gpio_get_pin(int portpin); +extern void hd64465_gpio_set_port(int port, unsigned int value); +extern unsigned int hd64465_gpio_get_port(int port); + +/* mode constants for _register_irq() */ +#define HD64465_GPIO_FALLING 0 +#define HD64465_GPIO_RISING 1 + +/* Interrupt on external value change */ +extern void hd64465_gpio_register_irq(int portpin, int mode, + void (*handler)(int portpin, void *dev), void *dev); +extern void hd64465_gpio_unregister_irq(int portpin); + +#endif /* _ASM_SH_HD64465_GPIO_ */ diff --git a/arch/sh/include/asm/hd64465/hd64465.h b/arch/sh/include/asm/hd64465/hd64465.h new file mode 100644 index 000000000000..cfd0e803d2a2 --- /dev/null +++ b/arch/sh/include/asm/hd64465/hd64465.h @@ -0,0 +1,256 @@ +#ifndef _ASM_SH_HD64465_ +#define _ASM_SH_HD64465_ 1 +/* + * $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $ + * + * Hitachi HD64465 companion chip support + * + * by Greg Banks + * (c) 2000 PocketPenguins Inc. + * + * Derived from which bore the message: + * Copyright (C) 2000 YAEGASHI Takeshi + */ +#include +#include + +/* + * Note that registers are defined here as virtual port numbers, + * which have no meaning except to get translated by hd64465_isa_port2addr() + * to an address in the range 0xb0000000-0xb3ffffff. Note that + * this translation happens to consist of adding the lower 16 bits + * of the virtual port number to 0xb0000000. Note also that the manual + * shows addresses as absolute physical addresses starting at 0x10000000, + * so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the + * manual, and accessed using address 0xb0005000 - Greg. + */ + +/* System registers */ +#define HD64465_REG_SRR 0x1000c /* System Revision Register */ +#define HD64465_REG_SDID 0x10010 /* System Device ID Reg */ +#define HD64465_SDID 0x8122 /* 64465 device ID */ + +/* Power Management registers */ +#define HD64465_REG_SMSCR 0x10000 /* System Module Standby Control Reg */ +#define HD64465_SMSCR_PS2ST 0x4000 /* PS/2 Standby */ +#define HD64465_SMSCR_ADCST 0x1000 /* ADC Standby */ +#define HD64465_SMSCR_UARTST 0x0800 /* UART Standby */ +#define HD64465_SMSCR_SCDIST 0x0200 /* Serial Codec Standby */ +#define HD64465_SMSCR_PPST 0x0100 /* Parallel Port Standby */ +#define HD64465_SMSCR_PC0ST 0x0040 /* PCMCIA0 Standby */ +#define HD64465_SMSCR_PC1ST 0x0020 /* PCMCIA1 Standby */ +#define HD64465_SMSCR_AFEST 0x0010 /* AFE Standby */ +#define HD64465_SMSCR_TM0ST 0x0008 /* Timer0 Standby */ +#define HD64465_SMSCR_TM1ST 0x0004 /* Timer1 Standby */ +#define HD64465_SMSCR_IRDAST 0x0002 /* IRDA Standby */ +#define HD64465_SMSCR_KBCST 0x0001 /* Keyboard Controller Standby */ + +/* Interrupt Controller registers */ +#define HD64465_REG_NIRR 0x15000 /* Interrupt Request Register */ +#define HD64465_REG_NIMR 0x15002 /* Interrupt Mask Register */ +#define HD64465_REG_NITR 0x15004 /* Interrupt Trigger Mode Register */ + +/* Timer registers */ +#define HD64465_REG_TCVR1 0x16000 /* Timer 1 constant value register */ +#define HD64465_REG_TCVR0 0x16002 /* Timer 0 constant value register */ +#define HD64465_REG_TRVR1 0x16004 /* Timer 1 read value register */ +#define HD64465_REG_TRVR0 0x16006 /* Timer 0 read value register */ +#define HD64465_REG_TCR1 0x16008 /* Timer 1 control register */ +#define HD64465_REG_TCR0 0x1600A /* Timer 0 control register */ +#define HD64465_TCR_EADT 0x10 /* Enable ADTRIG# signal */ +#define HD64465_TCR_ETMO 0x08 /* Enable TMO signal */ +#define HD64465_TCR_PST_MASK 0x06 /* Clock Prescale */ +#define HD64465_TCR_PST_1 0x06 /* 1:1 */ +#define HD64465_TCR_PST_4 0x04 /* 1:4 */ +#define HD64465_TCR_PST_8 0x02 /* 1:8 */ +#define HD64465_TCR_PST_16 0x00 /* 1:16 */ +#define HD64465_TCR_TSTP 0x01 /* Start/Stop timer */ +#define HD64465_REG_TIRR 0x1600C /* Timer interrupt request register */ +#define HD64465_REG_TIDR 0x1600E /* Timer interrupt disable register */ +#define HD64465_REG_PWM1CS 0x16010 /* PWM 1 clock scale register */ +#define HD64465_REG_PWM1LPC 0x16012 /* PWM 1 low pulse width counter register */ +#define HD64465_REG_PWM1HPC 0x16014 /* PWM 1 high pulse width counter register */ +#define HD64465_REG_PWM0CS 0x16018 /* PWM 0 clock scale register */ +#define HD64465_REG_PWM0LPC 0x1601A /* PWM 0 low pulse width counter register */ +#define HD64465_REG_PWM0HPC 0x1601C /* PWM 0 high pulse width counter register */ + +/* Analog/Digital Converter registers */ +#define HD64465_REG_ADDRA 0x1E000 /* A/D data register A */ +#define HD64465_REG_ADDRB 0x1E002 /* A/D data register B */ +#define HD64465_REG_ADDRC 0x1E004 /* A/D data register C */ +#define HD64465_REG_ADDRD 0x1E006 /* A/D data register D */ +#define HD64465_REG_ADCSR 0x1E008 /* A/D control/status register */ +#define HD64465_ADCSR_ADF 0x80 /* A/D End Flag */ +#define HD64465_ADCSR_ADST 0x40 /* A/D Start Flag */ +#define HD64465_ADCSR_ADIS 0x20 /* A/D Interrupt Status */ +#define HD64465_ADCSR_TRGE 0x10 /* A/D Trigger Enable */ +#define HD64465_ADCSR_ADIE 0x08 /* A/D Interrupt Enable */ +#define HD64465_ADCSR_SCAN 0x04 /* A/D Scan Mode */ +#define HD64465_ADCSR_CH_MASK 0x03 /* A/D Channel */ +#define HD64465_REG_ADCALCR 0x1E00A /* A/D calibration sample control */ +#define HD64465_REG_ADCAL 0x1E00C /* A/D calibration data register */ + + +/* General Purpose I/O ports registers */ +#define HD64465_REG_GPACR 0x14000 /* Port A Control Register */ +#define HD64465_REG_GPBCR 0x14002 /* Port B Control Register */ +#define HD64465_REG_GPCCR 0x14004 /* Port C Control Register */ +#define HD64465_REG_GPDCR 0x14006 /* Port D Control Register */ +#define HD64465_REG_GPECR 0x14008 /* Port E Control Register */ +#define HD64465_REG_GPADR 0x14010 /* Port A Data Register */ +#define HD64465_REG_GPBDR 0x14012 /* Port B Data Register */ +#define HD64465_REG_GPCDR 0x14014 /* Port C Data Register */ +#define HD64465_REG_GPDDR 0x14016 /* Port D Data Register */ +#define HD64465_REG_GPEDR 0x14018 /* Port E Data Register */ +#define HD64465_REG_GPAICR 0x14020 /* Port A Interrupt Control Register */ +#define HD64465_REG_GPBICR 0x14022 /* Port B Interrupt Control Register */ +#define HD64465_REG_GPCICR 0x14024 /* Port C Interrupt Control Register */ +#define HD64465_REG_GPDICR 0x14026 /* Port D Interrupt Control Register */ +#define HD64465_REG_GPEICR 0x14028 /* Port E Interrupt Control Register */ +#define HD64465_REG_GPAISR 0x14040 /* Port A Interrupt Status Register */ +#define HD64465_REG_GPBISR 0x14042 /* Port B Interrupt Status Register */ +#define HD64465_REG_GPCISR 0x14044 /* Port C Interrupt Status Register */ +#define HD64465_REG_GPDISR 0x14046 /* Port D Interrupt Status Register */ +#define HD64465_REG_GPEISR 0x14048 /* Port E Interrupt Status Register */ + +/* PCMCIA bridge interface */ +#define HD64465_REG_PCC0ISR 0x12000 /* socket 0 interface status */ +#define HD64465_PCCISR_PREADY 0x80 /* mem card ready / io card IREQ */ +#define HD64465_PCCISR_PIREQ 0x80 +#define HD64465_PCCISR_PMWP 0x40 /* mem card write-protected */ +#define HD64465_PCCISR_PVS2 0x20 /* voltage select pin 2 */ +#define HD64465_PCCISR_PVS1 0x10 /* voltage select pin 1 */ +#define HD64465_PCCISR_PCD_MASK 0x0c /* card detect */ +#define HD64465_PCCISR_PBVD_MASK 0x03 /* battery voltage */ +#define HD64465_PCCISR_PBVD_BATGOOD 0x03 /* battery good */ +#define HD64465_PCCISR_PBVD_BATWARN 0x01 /* battery low warning */ +#define HD64465_PCCISR_PBVD_BATDEAD1 0x02 /* battery dead */ +#define HD64465_PCCISR_PBVD_BATDEAD2 0x00 /* battery dead */ +#define HD64465_REG_PCC0GCR 0x12002 /* socket 0 general control */ +#define HD64465_PCCGCR_PDRV 0x80 /* output drive */ +#define HD64465_PCCGCR_PCCR 0x40 /* PC card reset */ +#define HD64465_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */ +#define HD64465_PCCGCR_PVCC0 0x10 /* voltage control pin VCC0SEL0 */ +#define HD64465_PCCGCR_PMMOD 0x08 /* memory mode */ +#define HD64465_PCCGCR_PPA25 0x04 /* pin A25 */ +#define HD64465_PCCGCR_PPA24 0x02 /* pin A24 */ +#define HD64465_PCCGCR_PREG 0x01 /* ping PCC0REG# */ +#define HD64465_REG_PCC0CSCR 0x12004 /* socket 0 card status change */ +#define HD64465_PCCCSCR_PSCDI 0x80 /* sw card detect intr */ +#define HD64465_PCCCSCR_PSWSEL 0x40 /* power select */ +#define HD64465_PCCCSCR_PIREQ 0x20 /* IREQ intr req */ +#define HD64465_PCCCSCR_PSC 0x10 /* STSCHG (status change) pin */ +#define HD64465_PCCCSCR_PCDC 0x08 /* CD (card detect) change */ +#define HD64465_PCCCSCR_PRC 0x04 /* ready change */ +#define HD64465_PCCCSCR_PBW 0x02 /* battery warning change */ +#define HD64465_PCCCSCR_PBD 0x01 /* battery dead change */ +#define HD64465_REG_PCC0CSCIER 0x12006 /* socket 0 card status change interrupt enable */ +#define HD64465_PCCCSCIER_PCRE 0x80 /* change reset enable */ +#define HD64465_PCCCSCIER_PIREQE_MASK 0x60 /* IREQ enable */ +#define HD64465_PCCCSCIER_PIREQE_DISABLED 0x00 /* IREQ disabled */ +#define HD64465_PCCCSCIER_PIREQE_LEVEL 0x20 /* IREQ level-triggered */ +#define HD64465_PCCCSCIER_PIREQE_FALLING 0x40 /* IREQ falling-edge-trig */ +#define HD64465_PCCCSCIER_PIREQE_RISING 0x60 /* IREQ rising-edge-trig */ +#define HD64465_PCCCSCIER_PSCE 0x10 /* status change enable */ +#define HD64465_PCCCSCIER_PCDE 0x08 /* card detect change enable */ +#define HD64465_PCCCSCIER_PRE 0x04 /* ready change enable */ +#define HD64465_PCCCSCIER_PBWE 0x02 /* battery warn change enable */ +#define HD64465_PCCCSCIER_PBDE 0x01 /* battery dead change enable*/ +#define HD64465_REG_PCC0SCR 0x12008 /* socket 0 software control */ +#define HD64465_PCCSCR_SHDN 0x10 /* TPS2206 SHutDowN pin */ +#define HD64465_PCCSCR_SWP 0x01 /* write protect */ +#define HD64465_REG_PCCPSR 0x1200A /* serial power switch control */ +#define HD64465_REG_PCC1ISR 0x12010 /* socket 1 interface status */ +#define HD64465_REG_PCC1GCR 0x12012 /* socket 1 general control */ +#define HD64465_REG_PCC1CSCR 0x12014 /* socket 1 card status change */ +#define HD64465_REG_PCC1CSCIER 0x12016 /* socket 1 card status change interrupt enable */ +#define HD64465_REG_PCC1SCR 0x12018 /* socket 1 software control */ + + +/* PS/2 Keyboard and mouse controller -- *not* register compatible */ +#define HD64465_REG_KBCSR 0x1dc00 /* Keyboard Control/Status reg */ +#define HD64465_KBCSR_KBCIE 0x8000 /* KBCK Input Enable */ +#define HD64465_KBCSR_KBCOE 0x4000 /* KBCK Output Enable */ +#define HD64465_KBCSR_KBDOE 0x2000 /* KB DATA Output Enable */ +#define HD64465_KBCSR_KBCD 0x1000 /* KBCK Driven */ +#define HD64465_KBCSR_KBDD 0x0800 /* KB DATA Driven */ +#define HD64465_KBCSR_KBCS 0x0400 /* KBCK pin Status */ +#define HD64465_KBCSR_KBDS 0x0200 /* KB DATA pin Status */ +#define HD64465_KBCSR_KBDP 0x0100 /* KB DATA Parity bit */ +#define HD64465_KBCSR_KBD_MASK 0x00ff /* KD DATA shift reg */ +#define HD64465_REG_KBISR 0x1dc04 /* Keyboard Interrupt Status reg */ +#define HD64465_KBISR_KBRDF 0x0001 /* KB Received Data Full */ +#define HD64465_REG_MSCSR 0x1dc10 /* Mouse Control/Status reg */ +#define HD64465_REG_MSISR 0x1dc14 /* Mouse Interrupt Status reg */ + + +/* + * Logical address at which the HD64465 is mapped. Note that this + * should always be in the P2 segment (uncached and untranslated). + */ +#ifndef CONFIG_HD64465_IOBASE +#define CONFIG_HD64465_IOBASE 0xb0000000 +#endif +/* + * The HD64465 multiplexes all its modules' interrupts onto + * this single interrupt. + */ +#ifndef CONFIG_HD64465_IRQ +#define CONFIG_HD64465_IRQ 5 +#endif + + +#define _HD64465_IO_MASK 0xf8000000 +#define is_hd64465_addr(addr) \ + ((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK)) + +/* + * A range of 16 virtual interrupts generated by + * demuxing the HD64465 muxed interrupt. + */ +#define HD64465_IRQ_BASE OFFCHIP_IRQ_BASE +#define HD64465_IRQ_NUM 16 +#define HD64465_IRQ_ADC (HD64465_IRQ_BASE+0) +#define HD64465_IRQ_USB (HD64465_IRQ_BASE+1) +#define HD64465_IRQ_SCDI (HD64465_IRQ_BASE+2) +#define HD64465_IRQ_PARALLEL (HD64465_IRQ_BASE+3) +/* bit 4 is reserved */ +#define HD64465_IRQ_UART (HD64465_IRQ_BASE+5) +#define HD64465_IRQ_IRDA (HD64465_IRQ_BASE+6) +#define HD64465_IRQ_PS2MOUSE (HD64465_IRQ_BASE+7) +#define HD64465_IRQ_KBC (HD64465_IRQ_BASE+8) +#define HD64465_IRQ_TIMER1 (HD64465_IRQ_BASE+9) +#define HD64465_IRQ_TIMER0 (HD64465_IRQ_BASE+10) +#define HD64465_IRQ_GPIO (HD64465_IRQ_BASE+11) +#define HD64465_IRQ_AFE (HD64465_IRQ_BASE+12) +#define HD64465_IRQ_PCMCIA1 (HD64465_IRQ_BASE+13) +#define HD64465_IRQ_PCMCIA0 (HD64465_IRQ_BASE+14) +#define HD64465_IRQ_PS2KBD (HD64465_IRQ_BASE+15) + +/* Constants for PCMCIA mappings */ +#define HD64465_PCC_WINDOW 0x01000000 + +#define HD64465_PCC0_BASE 0xb8000000 /* area 6 */ +#define HD64465_PCC0_ATTR (HD64465_PCC0_BASE) +#define HD64465_PCC0_COMM (HD64465_PCC0_BASE+HD64465_PCC_WINDOW) +#define HD64465_PCC0_IO (HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW) + +#define HD64465_PCC1_BASE 0xb4000000 /* area 5 */ +#define HD64465_PCC1_ATTR (HD64465_PCC1_BASE) +#define HD64465_PCC1_COMM (HD64465_PCC1_BASE+HD64465_PCC_WINDOW) +#define HD64465_PCC1_IO (HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW) + +/* + * Base of USB controller interface (as memory) + */ +#define HD64465_USB_BASE (CONFIG_HD64465_IOBASE+0xb000) +#define HD64465_USB_LEN 0x1000 +/* + * Base of embedded SRAM, used for USB controller. + */ +#define HD64465_SRAM_BASE (CONFIG_HD64465_IOBASE+0x9000) +#define HD64465_SRAM_LEN 0x1000 + + + +#endif /* _ASM_SH_HD64465_ */ diff --git a/arch/sh/include/asm/hd64465/io.h b/arch/sh/include/asm/hd64465/io.h new file mode 100644 index 000000000000..139f1472e5bb --- /dev/null +++ b/arch/sh/include/asm/hd64465/io.h @@ -0,0 +1,44 @@ +/* + * include/asm-sh/hd64465/io.h + * + * By Greg Banks + * (c) 2000 PocketPenguins Inc. + * + * Derived from io_hd64461.h, which bore the message: + * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * IO functions for an HD64465 "Windows CE Intelligent Peripheral Controller". + */ + +#ifndef _ASM_SH_IO_HD64465_H +#define _ASM_SH_IO_HD64465_H + +extern unsigned char hd64465_inb(unsigned long port); +extern unsigned short hd64465_inw(unsigned long port); +extern unsigned int hd64465_inl(unsigned long port); + +extern void hd64465_outb(unsigned char value, unsigned long port); +extern void hd64465_outw(unsigned short value, unsigned long port); +extern void hd64465_outl(unsigned int value, unsigned long port); + +extern unsigned char hd64465_inb_p(unsigned long port); +extern void hd64465_outb_p(unsigned char value, unsigned long port); + +extern unsigned long hd64465_isa_port2addr(unsigned long offset); +extern int hd64465_irq_demux(int irq); +/* Provision for generic secondary demux step -- used by PCMCIA code */ +extern void hd64465_register_irq_demux(int irq, + int (*demux)(int irq, void *dev), void *dev); +extern void hd64465_unregister_irq_demux(int irq); +/* Set this variable to 1 to see port traffic */ +extern int hd64465_io_debug; +/* Map a range of ports to a range of kernel virtual memory. + */ +extern void hd64465_port_map(unsigned short baseport, unsigned int nports, + unsigned long addr, unsigned char shift); +extern void hd64465_port_unmap(unsigned short baseport, unsigned int nports); + +#endif /* _ASM_SH_IO_HD64465_H */ diff --git a/arch/sh/include/asm/heartbeat.h b/arch/sh/include/asm/heartbeat.h new file mode 100644 index 000000000000..724a43ed245e --- /dev/null +++ b/arch/sh/include/asm/heartbeat.h @@ -0,0 +1,17 @@ +#ifndef __ASM_SH_HEARTBEAT_H +#define __ASM_SH_HEARTBEAT_H + +#include + +#define HEARTBEAT_INVERTED (1 << 0) + +struct heartbeat_data { + void __iomem *base; + unsigned char *bit_pos; + unsigned int nr_bits; + struct timer_list timer; + unsigned int regsize; + unsigned long flags; +}; + +#endif /* __ASM_SH_HEARTBEAT_H */ diff --git a/arch/sh/include/asm/hp6xx.h b/arch/sh/include/asm/hp6xx.h new file mode 100644 index 000000000000..0d4165a32dcd --- /dev/null +++ b/arch/sh/include/asm/hp6xx.h @@ -0,0 +1,58 @@ +#ifndef __ASM_SH_HP6XX_H +#define __ASM_SH_HP6XX_H + +/* + * Copyright (C) 2003, 2004, 2005 Andriy Skulysh + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#define HP680_BTN_IRQ 32 /* IRQ0_IRQ */ +#define HP680_TS_IRQ 35 /* IRQ3_IRQ */ +#define HP680_HD64461_IRQ 36 /* IRQ4_IRQ */ + +#define DAC_LCD_BRIGHTNESS 0 +#define DAC_SPEAKER_VOLUME 1 + +#define PGDR_OPENED 0x01 +#define PGDR_MAIN_BATTERY_OUT 0x04 +#define PGDR_PLAY_BUTTON 0x08 +#define PGDR_REWIND_BUTTON 0x10 +#define PGDR_RECORD_BUTTON 0x20 + +#define PHDR_TS_PEN_DOWN 0x08 + +#define PJDR_LED_BLINK 0x02 + +#define PKDR_LED_GREEN 0x10 + +#define SCPDR_TS_SCAN_ENABLE 0x20 +#define SCPDR_TS_SCAN_Y 0x02 +#define SCPDR_TS_SCAN_X 0x01 + +#define SCPCR_TS_ENABLE 0x405 +#define SCPCR_TS_MASK 0xc0f + +#define ADC_CHANNEL_TS_Y 1 +#define ADC_CHANNEL_TS_X 2 +#define ADC_CHANNEL_BATTERY 3 +#define ADC_CHANNEL_BACKUP 4 +#define ADC_CHANNEL_CHARGE 5 + +#define HD64461_GPADR_SPEAKER 0x01 +#define HD64461_GPADR_PCMCIA0 (0x02|0x08) + +#define HD64461_GPBDR_LCDOFF 0x01 +#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78 +#define HD64461_GPBDR_LED_RED 0x80 + +#include +#include + +#define PJDR 0xa4000130 +#define PKDR 0xa4000132 + +#endif /* __ASM_SH_HP6XX_H */ diff --git a/arch/sh/include/asm/hugetlb.h b/arch/sh/include/asm/hugetlb.h new file mode 100644 index 000000000000..967068fb79ac --- /dev/null +++ b/arch/sh/include/asm/hugetlb.h @@ -0,0 +1,92 @@ +#ifndef _ASM_SH_HUGETLB_H +#define _ASM_SH_HUGETLB_H + +#include + + +static inline int is_hugepage_only_range(struct mm_struct *mm, + unsigned long addr, + unsigned long len) { + return 0; +} + +/* + * If the arch doesn't supply something else, assume that hugepage + * size aligned regions are ok without further preparation. + */ +static inline int prepare_hugepage_range(struct file *file, + unsigned long addr, unsigned long len) +{ + if (len & ~HPAGE_MASK) + return -EINVAL; + if (addr & ~HPAGE_MASK) + return -EINVAL; + return 0; +} + +static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) { +} + +static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb, + unsigned long addr, unsigned long end, + unsigned long floor, + unsigned long ceiling) +{ + free_pgd_range(tlb, addr, end, floor, ceiling); +} + +static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ + set_pte_at(mm, addr, ptep, pte); +} + +static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + return ptep_get_and_clear(mm, addr, ptep); +} + +static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ +} + +static inline int huge_pte_none(pte_t pte) +{ + return pte_none(pte); +} + +static inline pte_t huge_pte_wrprotect(pte_t pte) +{ + return pte_wrprotect(pte); +} + +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + ptep_set_wrprotect(mm, addr, ptep); +} + +static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, + pte_t pte, int dirty) +{ + return ptep_set_access_flags(vma, addr, ptep, pte, dirty); +} + +static inline pte_t huge_ptep_get(pte_t *ptep) +{ + return *ptep; +} + +static inline int arch_prepare_hugepage(struct page *page) +{ + return 0; +} + +static inline void arch_release_hugepage(struct page *page) +{ +} + +#endif /* _ASM_SH_HUGETLB_H */ diff --git a/arch/sh/include/asm/hw_irq.h b/arch/sh/include/asm/hw_irq.h new file mode 100644 index 000000000000..d557b00111bf --- /dev/null +++ b/arch/sh/include/asm/hw_irq.h @@ -0,0 +1,123 @@ +#ifndef __ASM_SH_HW_IRQ_H +#define __ASM_SH_HW_IRQ_H + +#include +#include + +extern atomic_t irq_err_count; + +struct ipr_data { + unsigned char irq; + unsigned char ipr_idx; /* Index for the IPR registered */ + unsigned char shift; /* Number of bits to shift the data */ + unsigned char priority; /* The priority */ +}; + +struct ipr_desc { + unsigned long *ipr_offsets; + unsigned int nr_offsets; + struct ipr_data *ipr_data; + unsigned int nr_irqs; + struct irq_chip chip; +}; + +void register_ipr_controller(struct ipr_desc *); + +typedef unsigned char intc_enum; + +struct intc_vect { + intc_enum enum_id; + unsigned short vect; +}; + +#define INTC_VECT(enum_id, vect) { enum_id, vect } +#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq)) + +struct intc_group { + intc_enum enum_id; + intc_enum enum_ids[32]; +}; + +#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } } + +struct intc_mask_reg { + unsigned long set_reg, clr_reg, reg_width; + intc_enum enum_ids[32]; +#ifdef CONFIG_SMP + unsigned long smp; +#endif +}; + +struct intc_prio_reg { + unsigned long set_reg, clr_reg, reg_width, field_width; + intc_enum enum_ids[16]; +#ifdef CONFIG_SMP + unsigned long smp; +#endif +}; + +struct intc_sense_reg { + unsigned long reg, reg_width, field_width; + intc_enum enum_ids[16]; +}; + +#ifdef CONFIG_SMP +#define INTC_SMP(stride, nr) .smp = (stride) | ((nr) << 8) +#else +#define INTC_SMP(stride, nr) +#endif + +struct intc_desc { + struct intc_vect *vectors; + unsigned int nr_vectors; + struct intc_group *groups; + unsigned int nr_groups; + struct intc_mask_reg *mask_regs; + unsigned int nr_mask_regs; + struct intc_prio_reg *prio_regs; + unsigned int nr_prio_regs; + struct intc_sense_reg *sense_regs; + unsigned int nr_sense_regs; + char *name; +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) + struct intc_mask_reg *ack_regs; + unsigned int nr_ack_regs; +#endif +}; + +#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a) +#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups, \ + mask_regs, prio_regs, sense_regs) \ +struct intc_desc symbol __initdata = { \ + _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \ + _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \ + _INTC_ARRAY(sense_regs), \ + chipname, \ +} + +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) +#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \ + mask_regs, prio_regs, sense_regs, ack_regs) \ +struct intc_desc symbol __initdata = { \ + _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \ + _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \ + _INTC_ARRAY(sense_regs), \ + chipname, \ + _INTC_ARRAY(ack_regs), \ +} +#endif + +void __init register_intc_controller(struct intc_desc *desc); +int intc_set_priority(unsigned int irq, unsigned int prio); + +void __init plat_irq_setup(void); +#ifdef CONFIG_CPU_SH3 +void __init plat_irq_setup_sh3(void); +#endif + +enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210, + IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK, + IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 }; +void __init plat_irq_setup_pins(int mode); + +#endif /* __ASM_SH_HW_IRQ_H */ diff --git a/arch/sh/include/asm/i2c-sh7760.h b/arch/sh/include/asm/i2c-sh7760.h new file mode 100644 index 000000000000..24182116711f --- /dev/null +++ b/arch/sh/include/asm/i2c-sh7760.h @@ -0,0 +1,22 @@ +/* + * MMIO/IRQ and platform data for SH7760 I2C channels + */ + +#ifndef _I2C_SH7760_H_ +#define _I2C_SH7760_H_ + +#define SH7760_I2C_DEVNAME "sh7760-i2c" + +#define SH7760_I2C0_MMIO 0xFE140000 +#define SH7760_I2C0_MMIOEND 0xFE14003B +#define SH7760_I2C0_IRQ 62 + +#define SH7760_I2C1_MMIO 0xFE150000 +#define SH7760_I2C1_MMIOEND 0xFE15003B +#define SH7760_I2C1_IRQ 63 + +struct sh7760_i2c_platdata { + unsigned int speed_khz; +}; + +#endif diff --git a/arch/sh/include/asm/ilsel.h b/arch/sh/include/asm/ilsel.h new file mode 100644 index 000000000000..e3d304b280f6 --- /dev/null +++ b/arch/sh/include/asm/ilsel.h @@ -0,0 +1,45 @@ +#ifndef __ASM_SH_ILSEL_H +#define __ASM_SH_ILSEL_H + +typedef enum { + ILSEL_NONE, + ILSEL_LAN, + ILSEL_USBH_I, + ILSEL_USBH_S, + ILSEL_USBH_V, + ILSEL_RTC, + ILSEL_USBP_I, + ILSEL_USBP_S, + ILSEL_USBP_V, + ILSEL_KEY, + + /* + * ILSEL Aliases - corner cases for interleaved level tables. + * + * Someone thought this was a good idea and less hassle than + * demuxing a shared vector, really. + */ + + /* ILSEL0 and 2 */ + ILSEL_FPGA0, + ILSEL_FPGA1, + ILSEL_EX1, + ILSEL_EX2, + ILSEL_EX3, + ILSEL_EX4, + + /* ILSEL1 and 3 */ + ILSEL_FPGA2 = ILSEL_FPGA0, + ILSEL_FPGA3 = ILSEL_FPGA1, + ILSEL_EX5 = ILSEL_EX1, + ILSEL_EX6 = ILSEL_EX2, + ILSEL_EX7 = ILSEL_EX3, + ILSEL_EX8 = ILSEL_EX4, +} ilsel_source_t; + +/* arch/sh/boards/renesas/x3proto/ilsel.c */ +int ilsel_enable(ilsel_source_t set); +int ilsel_enable_fixed(ilsel_source_t set, unsigned int level); +void ilsel_disable(unsigned int irq); + +#endif /* __ASM_SH_ILSEL_H */ diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h new file mode 100644 index 000000000000..a4fbf0c84fb1 --- /dev/null +++ b/arch/sh/include/asm/io.h @@ -0,0 +1,366 @@ +#ifndef __ASM_SH_IO_H +#define __ASM_SH_IO_H + +/* + * Convention: + * read{b,w,l}/write{b,w,l} are for PCI, + * while in{b,w,l}/out{b,w,l} are for ISA + * These may (will) be platform specific function. + * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p + * and 'string' versions: ins{b,w,l}/outs{b,w,l} + * For read{b,w,l} and write{b,w,l} there are also __raw versions, which + * do not have a memory barrier after them. + * + * In addition, we have + * ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O. + * which are processor specific. + */ + +/* + * We follow the Alpha convention here: + * __inb expands to an inline function call (which calls via the mv) + * _inb is a real function call (note ___raw fns are _ version of __raw) + * inb by default expands to _inb, but the machine specific code may + * define it to __inb if it chooses. + */ +#include +#include +#include +#include +#include +#include + +#ifdef __KERNEL__ + +/* + * Depending on which platform we are running on, we need different + * I/O functions. + */ +#define __IO_PREFIX generic +#include +#include + +#define maybebadio(port) \ + printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \ + __FUNCTION__, __LINE__, (port), (u32)__builtin_return_address(0)) + +/* + * Since boards are able to define their own set of I/O routines through + * their respective machine vector, we always wrap through the mv. + * + * Also, in the event that a board hasn't provided its own definition for + * a given routine, it will be wrapped to generic code at run-time. + */ + +#define __inb(p) sh_mv.mv_inb((p)) +#define __inw(p) sh_mv.mv_inw((p)) +#define __inl(p) sh_mv.mv_inl((p)) +#define __outb(x,p) sh_mv.mv_outb((x),(p)) +#define __outw(x,p) sh_mv.mv_outw((x),(p)) +#define __outl(x,p) sh_mv.mv_outl((x),(p)) + +#define __inb_p(p) sh_mv.mv_inb_p((p)) +#define __inw_p(p) sh_mv.mv_inw_p((p)) +#define __inl_p(p) sh_mv.mv_inl_p((p)) +#define __outb_p(x,p) sh_mv.mv_outb_p((x),(p)) +#define __outw_p(x,p) sh_mv.mv_outw_p((x),(p)) +#define __outl_p(x,p) sh_mv.mv_outl_p((x),(p)) + +#define __insb(p,b,c) sh_mv.mv_insb((p), (b), (c)) +#define __insw(p,b,c) sh_mv.mv_insw((p), (b), (c)) +#define __insl(p,b,c) sh_mv.mv_insl((p), (b), (c)) +#define __outsb(p,b,c) sh_mv.mv_outsb((p), (b), (c)) +#define __outsw(p,b,c) sh_mv.mv_outsw((p), (b), (c)) +#define __outsl(p,b,c) sh_mv.mv_outsl((p), (b), (c)) + +#define __readb(a) sh_mv.mv_readb((a)) +#define __readw(a) sh_mv.mv_readw((a)) +#define __readl(a) sh_mv.mv_readl((a)) +#define __writeb(v,a) sh_mv.mv_writeb((v),(a)) +#define __writew(v,a) sh_mv.mv_writew((v),(a)) +#define __writel(v,a) sh_mv.mv_writel((v),(a)) + +#define inb __inb +#define inw __inw +#define inl __inl +#define outb __outb +#define outw __outw +#define outl __outl + +#define inb_p __inb_p +#define inw_p __inw_p +#define inl_p __inl_p +#define outb_p __outb_p +#define outw_p __outw_p +#define outl_p __outl_p + +#define insb __insb +#define insw __insw +#define insl __insl +#define outsb __outsb +#define outsw __outsw +#define outsl __outsl + +#define __raw_readb(a) __readb((void __iomem *)(a)) +#define __raw_readw(a) __readw((void __iomem *)(a)) +#define __raw_readl(a) __readl((void __iomem *)(a)) +#define __raw_writeb(v, a) __writeb(v, (void __iomem *)(a)) +#define __raw_writew(v, a) __writew(v, (void __iomem *)(a)) +#define __raw_writel(v, a) __writel(v, (void __iomem *)(a)) + +void __raw_writesl(unsigned long addr, const void *data, int longlen); +void __raw_readsl(unsigned long addr, void *data, int longlen); + +/* + * The platform header files may define some of these macros to use + * the inlined versions where appropriate. These macros may also be + * redefined by userlevel programs. + */ +#ifdef __readb +# define readb(a) ({ unsigned int r_ = __raw_readb(a); mb(); r_; }) +#endif +#ifdef __raw_readw +# define readw(a) ({ unsigned int r_ = __raw_readw(a); mb(); r_; }) +#endif +#ifdef __raw_readl +# define readl(a) ({ unsigned int r_ = __raw_readl(a); mb(); r_; }) +#endif + +#ifdef __raw_writeb +# define writeb(v,a) ({ __raw_writeb((v),(a)); mb(); }) +#endif +#ifdef __raw_writew +# define writew(v,a) ({ __raw_writew((v),(a)); mb(); }) +#endif +#ifdef __raw_writel +# define writel(v,a) ({ __raw_writel((v),(a)); mb(); }) +#endif + +#define __BUILD_MEMORY_STRING(bwlq, type) \ + \ +static inline void writes##bwlq(volatile void __iomem *mem, \ + const void *addr, unsigned int count) \ +{ \ + const volatile type *__addr = addr; \ + \ + while (count--) { \ + __raw_write##bwlq(*__addr, mem); \ + __addr++; \ + } \ +} \ + \ +static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \ + unsigned int count) \ +{ \ + volatile type *__addr = addr; \ + \ + while (count--) { \ + *__addr = __raw_read##bwlq(mem); \ + __addr++; \ + } \ +} + +__BUILD_MEMORY_STRING(b, u8) +__BUILD_MEMORY_STRING(w, u16) +#define writesl __raw_writesl +#define readsl __raw_readsl + +#define readb_relaxed(a) readb(a) +#define readw_relaxed(a) readw(a) +#define readl_relaxed(a) readl(a) + +/* Simple MMIO */ +#define ioread8(a) readb(a) +#define ioread16(a) readw(a) +#define ioread16be(a) be16_to_cpu(__raw_readw((a))) +#define ioread32(a) readl(a) +#define ioread32be(a) be32_to_cpu(__raw_readl((a))) + +#define iowrite8(v,a) writeb((v),(a)) +#define iowrite16(v,a) writew((v),(a)) +#define iowrite16be(v,a) __raw_writew(cpu_to_be16((v)),(a)) +#define iowrite32(v,a) writel((v),(a)) +#define iowrite32be(v,a) __raw_writel(cpu_to_be32((v)),(a)) + +#define ioread8_rep(a, d, c) readsb((a), (d), (c)) +#define ioread16_rep(a, d, c) readsw((a), (d), (c)) +#define ioread32_rep(a, d, c) readsl((a), (d), (c)) + +#define iowrite8_rep(a, s, c) writesb((a), (s), (c)) +#define iowrite16_rep(a, s, c) writesw((a), (s), (c)) +#define iowrite32_rep(a, s, c) writesl((a), (s), (c)) + +#define mmiowb() wmb() /* synco on SH-4A, otherwise a nop */ + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * This function provides a method for the generic case where a board-specific + * ioport_map simply needs to return the port + some arbitrary port base. + * + * We use this at board setup time to implicitly set the port base, and + * as a result, we can use the generic ioport_map. + */ +static inline void __set_io_port_base(unsigned long pbase) +{ + extern unsigned long generic_io_base; + + generic_io_base = pbase; +} + +#define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n)) + +/* We really want to try and get these to memcpy etc */ +extern void memcpy_fromio(void *, volatile void __iomem *, unsigned long); +extern void memcpy_toio(volatile void __iomem *, const void *, unsigned long); +extern void memset_io(volatile void __iomem *, int, unsigned long); + +/* SuperH on-chip I/O functions */ +static inline unsigned char ctrl_inb(unsigned long addr) +{ + return *(volatile unsigned char*)addr; +} + +static inline unsigned short ctrl_inw(unsigned long addr) +{ + return *(volatile unsigned short*)addr; +} + +static inline unsigned int ctrl_inl(unsigned long addr) +{ + return *(volatile unsigned long*)addr; +} + +static inline unsigned long long ctrl_inq(unsigned long addr) +{ + return *(volatile unsigned long long*)addr; +} + +static inline void ctrl_outb(unsigned char b, unsigned long addr) +{ + *(volatile unsigned char*)addr = b; +} + +static inline void ctrl_outw(unsigned short b, unsigned long addr) +{ + *(volatile unsigned short*)addr = b; +} + +static inline void ctrl_outl(unsigned int b, unsigned long addr) +{ + *(volatile unsigned long*)addr = b; +} + +static inline void ctrl_outq(unsigned long long b, unsigned long addr) +{ + *(volatile unsigned long long*)addr = b; +} + +static inline void ctrl_delay(void) +{ +#ifdef P2SEG + ctrl_inw(P2SEG); +#endif +} + +/* Quad-word real-mode I/O, don't ask.. */ +unsigned long long peek_real_address_q(unsigned long long addr); +unsigned long long poke_real_address_q(unsigned long long addr, + unsigned long long val); + +#if !defined(CONFIG_MMU) +#define virt_to_phys(address) ((unsigned long)(address)) +#define phys_to_virt(address) ((void *)(address)) +#else +#define virt_to_phys(address) (__pa(address)) +#define phys_to_virt(address) (__va(address)) +#endif + +/* + * On 32-bit SH, we traditionally have the whole physical address space + * mapped at all times (as MIPS does), so "ioremap()" and "iounmap()" do + * not need to do anything but place the address in the proper segment. + * This is true for P1 and P2 addresses, as well as some P3 ones. + * However, most of the P3 addresses and newer cores using extended + * addressing need to map through page tables, so the ioremap() + * implementation becomes a bit more complicated. + * + * See arch/sh/mm/ioremap.c for additional notes on this. + * + * We cheat a bit and always return uncachable areas until we've fixed + * the drivers to handle caching properly. + * + * On the SH-5 the concept of segmentation in the 1:1 PXSEG sense simply + * doesn't exist, so everything must go through page tables. + */ +#ifdef CONFIG_MMU +void __iomem *__ioremap(unsigned long offset, unsigned long size, + unsigned long flags); +void __iounmap(void __iomem *addr); + +/* arch/sh/mm/ioremap_64.c */ +unsigned long onchip_remap(unsigned long addr, unsigned long size, + const char *name); +extern void onchip_unmap(unsigned long vaddr); +#else +#define __ioremap(offset, size, flags) ((void __iomem *)(offset)) +#define __iounmap(addr) do { } while (0) +#define onchip_remap(addr, size, name) (addr) +#define onchip_unmap(addr) do { } while (0) +#endif /* CONFIG_MMU */ + +static inline void __iomem * +__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) +{ +#ifdef CONFIG_SUPERH32 + unsigned long last_addr = offset + size - 1; +#endif + void __iomem *ret; + + ret = __ioremap_trapped(offset, size); + if (ret) + return ret; + +#ifdef CONFIG_SUPERH32 + /* + * For P1 and P2 space this is trivial, as everything is already + * mapped. Uncached access for P1 addresses are done through P2. + * In the P3 case or for addresses outside of the 29-bit space, + * mapping must be done by the PMB or by using page tables. + */ + if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) { + if (unlikely(flags & _PAGE_CACHABLE)) + return (void __iomem *)P1SEGADDR(offset); + + return (void __iomem *)P2SEGADDR(offset); + } +#endif + + return __ioremap(offset, size, flags); +} + +#define ioremap(offset, size) \ + __ioremap_mode((offset), (size), 0) +#define ioremap_nocache(offset, size) \ + __ioremap_mode((offset), (size), 0) +#define ioremap_cache(offset, size) \ + __ioremap_mode((offset), (size), _PAGE_CACHABLE) +#define p3_ioremap(offset, size, flags) \ + __ioremap((offset), (size), (flags)) +#define iounmap(addr) \ + __iounmap((addr)) + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_IO_H */ diff --git a/arch/sh/include/asm/io_generic.h b/arch/sh/include/asm/io_generic.h new file mode 100644 index 000000000000..92fc6070d7b3 --- /dev/null +++ b/arch/sh/include/asm/io_generic.h @@ -0,0 +1,49 @@ +/* + * Trivial I/O routine definitions, intentionally meant to be included + * multiple times. Ugly I/O routine concatenation helpers taken from + * alpha. Must be included _before_ io.h to avoid preprocessor-induced + * routine mismatch. + */ +#define IO_CONCAT(a,b) _IO_CONCAT(a,b) +#define _IO_CONCAT(a,b) a ## _ ## b + +#ifndef __IO_PREFIX +#error "Don't include this header without a valid system prefix" +#endif + +u8 IO_CONCAT(__IO_PREFIX,inb)(unsigned long); +u16 IO_CONCAT(__IO_PREFIX,inw)(unsigned long); +u32 IO_CONCAT(__IO_PREFIX,inl)(unsigned long); + +void IO_CONCAT(__IO_PREFIX,outb)(u8, unsigned long); +void IO_CONCAT(__IO_PREFIX,outw)(u16, unsigned long); +void IO_CONCAT(__IO_PREFIX,outl)(u32, unsigned long); + +u8 IO_CONCAT(__IO_PREFIX,inb_p)(unsigned long); +u16 IO_CONCAT(__IO_PREFIX,inw_p)(unsigned long); +u32 IO_CONCAT(__IO_PREFIX,inl_p)(unsigned long); +void IO_CONCAT(__IO_PREFIX,outb_p)(u8, unsigned long); +void IO_CONCAT(__IO_PREFIX,outw_p)(u16, unsigned long); +void IO_CONCAT(__IO_PREFIX,outl_p)(u32, unsigned long); + +void IO_CONCAT(__IO_PREFIX,insb)(unsigned long, void *dst, unsigned long count); +void IO_CONCAT(__IO_PREFIX,insw)(unsigned long, void *dst, unsigned long count); +void IO_CONCAT(__IO_PREFIX,insl)(unsigned long, void *dst, unsigned long count); +void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long count); +void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count); +void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count); + +u8 IO_CONCAT(__IO_PREFIX,readb)(void __iomem *); +u16 IO_CONCAT(__IO_PREFIX,readw)(void __iomem *); +u32 IO_CONCAT(__IO_PREFIX,readl)(void __iomem *); +void IO_CONCAT(__IO_PREFIX,writeb)(u8, void __iomem *); +void IO_CONCAT(__IO_PREFIX,writew)(u16, void __iomem *); +void IO_CONCAT(__IO_PREFIX,writel)(u32, void __iomem *); + +void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size); +void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr); + +void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size); +void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr); + +#undef __IO_PREFIX diff --git a/arch/sh/include/asm/io_trapped.h b/arch/sh/include/asm/io_trapped.h new file mode 100644 index 000000000000..f1251d4f0ba9 --- /dev/null +++ b/arch/sh/include/asm/io_trapped.h @@ -0,0 +1,58 @@ +#ifndef __ASM_SH_IO_TRAPPED_H +#define __ASM_SH_IO_TRAPPED_H + +#include +#include +#include + +#define IO_TRAPPED_MAGIC 0xfeedbeef + +struct trapped_io { + unsigned int magic; + struct resource *resource; + unsigned int num_resources; + unsigned int minimum_bus_width; + struct list_head list; + void __iomem *virt_base; +} __aligned(PAGE_SIZE); + +#ifdef CONFIG_IO_TRAPPED +int register_trapped_io(struct trapped_io *tiop); +int handle_trapped_io(struct pt_regs *regs, unsigned long address); + +void __iomem *match_trapped_io_handler(struct list_head *list, + unsigned long offset, + unsigned long size); + +#ifdef CONFIG_HAS_IOMEM +extern struct list_head trapped_mem; + +static inline void __iomem * +__ioremap_trapped(unsigned long offset, unsigned long size) +{ + return match_trapped_io_handler(&trapped_mem, offset, size); +} +#else +#define __ioremap_trapped(offset, size) NULL +#endif + +#ifdef CONFIG_HAS_IOPORT +extern struct list_head trapped_io; + +static inline void __iomem * +__ioport_map_trapped(unsigned long offset, unsigned long size) +{ + return match_trapped_io_handler(&trapped_io, offset, size); +} +#else +#define __ioport_map_trapped(offset, size) NULL +#endif + +#else +#define register_trapped_io(tiop) (-1) +#define handle_trapped_io(tiop, address) 0 +#define __ioremap_trapped(offset, size) NULL +#define __ioport_map_trapped(offset, size) NULL +#endif + +#endif /* __ASM_SH_IO_TRAPPED_H */ diff --git a/arch/sh/include/asm/ioctl.h b/arch/sh/include/asm/ioctl.h new file mode 100644 index 000000000000..b279fe06dfe5 --- /dev/null +++ b/arch/sh/include/asm/ioctl.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/asm/ioctls.h b/arch/sh/include/asm/ioctls.h new file mode 100644 index 000000000000..c212c371a4a5 --- /dev/null +++ b/arch/sh/include/asm/ioctls.h @@ -0,0 +1,103 @@ +#ifndef __ASM_SH_IOCTLS_H +#define __ASM_SH_IOCTLS_H + +#include + +#define FIOCLEX _IO('f', 1) +#define FIONCLEX _IO('f', 2) +#define FIOASYNC _IOW('f', 125, int) +#define FIONBIO _IOW('f', 126, int) +#define FIONREAD _IOR('f', 127, int) +#define TIOCINQ FIONREAD +#define FIOQSIZE _IOR('f', 128, loff_t) + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 + +#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */ +#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */ +#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */ +#define TCSETAF 0x4012741C /* _IOW('t', 28, struct termio) */ + +#define TCSBRK _IO('t', 29) +#define TCXONC _IO('t', 30) +#define TCFLSH _IO('t', 31) + +#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */ +#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */ +#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ +#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ +#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ + +#define TIOCSPGRP _IOW('t', 118, int) +#define TIOCGPGRP _IOR('t', 119, int) + +#define TIOCEXCL _IO('T', 12) /* 0x540C */ +#define TIOCNXCL _IO('T', 13) /* 0x540D */ +#define TIOCSCTTY _IO('T', 14) /* 0x540E */ + +#define TIOCSTI _IOW('T', 18, char) /* 0x5412 */ +#define TIOCMGET _IOR('T', 21, unsigned int) /* 0x5415 */ +#define TIOCMBIS _IOW('T', 22, unsigned int) /* 0x5416 */ +#define TIOCMBIC _IOW('T', 23, unsigned int) /* 0x5417 */ +#define TIOCMSET _IOW('T', 24, unsigned int) /* 0x5418 */ +# define TIOCM_LE 0x001 +# define TIOCM_DTR 0x002 +# define TIOCM_RTS 0x004 +# define TIOCM_ST 0x008 +# define TIOCM_SR 0x010 +# define TIOCM_CTS 0x020 +# define TIOCM_CAR 0x040 +# define TIOCM_RNG 0x080 +# define TIOCM_DSR 0x100 +# define TIOCM_CD TIOCM_CAR +# define TIOCM_RI TIOCM_RNG + +#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) /* 0x5419 */ +#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) /* 0x541A */ +#define TIOCLINUX _IOW('T', 28, char) /* 0x541C */ +#define TIOCCONS _IO('T', 29) /* 0x541D */ +#define TIOCGSERIAL 0x803C541E /* _IOR('T', 30, struct serial_struct) 0x541E */ +#define TIOCSSERIAL 0x403C541F /* _IOW('T', 31, struct serial_struct) 0x541F */ +#define TIOCPKT _IOW('T', 32, int) /* 0x5420 */ +# define TIOCPKT_DATA 0 +# define TIOCPKT_FLUSHREAD 1 +# define TIOCPKT_FLUSHWRITE 2 +# define TIOCPKT_STOP 4 +# define TIOCPKT_START 8 +# define TIOCPKT_NOSTOP 16 +# define TIOCPKT_DOSTOP 32 + + +#define TIOCNOTTY _IO('T', 34) /* 0x5422 */ +#define TIOCSETD _IOW('T', 35, int) /* 0x5423 */ +#define TIOCGETD _IOR('T', 36, int) /* 0x5424 */ +#define TCSBRKP _IOW('T', 37, int) /* 0x5425 */ /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK _IO('T', 39) /* 0x5427 */ /* BSD compatibility */ +#define TIOCCBRK _IO('T', 40) /* 0x5428 */ /* BSD compatibility */ +#define TIOCGSID _IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */ +#define TCGETS2 _IOR('T', 42, struct termios2) +#define TCSETS2 _IOW('T', 43, struct termios2) +#define TCSETSW2 _IOW('T', 44, struct termios2) +#define TCSETSF2 _IOW('T', 45, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */ +#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */ +#define TIOCSERSWILD _IOW('T', 85, int) /* 0x5455 */ +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x80d85458 /* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */ +#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */ + /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ +# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ +#define TIOCSERGETMULTI 0x80A8545A /* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */ +#define TIOCSERSETMULTI 0x40A8545B /* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */ + +#define TIOCMIWAIT _IO('T', 92) /* 0x545C */ /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ + +#endif /* __ASM_SH_IOCTLS_H */ diff --git a/arch/sh/include/asm/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h new file mode 100644 index 000000000000..5ffc9972a7ea --- /dev/null +++ b/arch/sh/include/asm/ipcbuf.h @@ -0,0 +1,29 @@ +#ifndef __ASM_SH_IPCBUF_H__ +#define __ASM_SH_IPCBUF_H__ + +/* + * The ipc64_perm structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __ASM_SH_IPCBUF_H__ */ diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h new file mode 100644 index 000000000000..6195a531c1b0 --- /dev/null +++ b/arch/sh/include/asm/irq.h @@ -0,0 +1,57 @@ +#ifndef __ASM_SH_IRQ_H +#define __ASM_SH_IRQ_H + +#include + +/* + * A sane default based on a reasonable vector table size, platforms are + * advised to cap this at the hard limit that they're interested in + * through the machvec. + */ +#define NR_IRQS 256 + +/* + * Convert back and forth between INTEVT and IRQ values. + */ +#ifdef CONFIG_CPU_HAS_INTEVT +#define evt2irq(evt) (((evt) >> 5) - 16) +#define irq2evt(irq) (((irq) + 16) << 5) +#else +#define evt2irq(evt) (evt) +#define irq2evt(irq) (irq) +#endif + +/* + * Simple Mask Register Support + */ +extern void make_maskreg_irq(unsigned int irq); +extern unsigned short *irq_mask_register; + +/* + * PINT IRQs + */ +void init_IRQ_pint(void); +void make_imask_irq(unsigned int irq); + +static inline int generic_irq_demux(int irq) +{ + return irq; +} + +#define irq_canonicalize(irq) (irq) +#define irq_demux(irq) sh_mv.mv_irq_demux(irq) + +#ifdef CONFIG_IRQSTACKS +extern void irq_ctx_init(int cpu); +extern void irq_ctx_exit(int cpu); +# define __ARCH_HAS_DO_SOFTIRQ +#else +# define irq_ctx_init(cpu) do { } while (0) +# define irq_ctx_exit(cpu) do { } while (0) +#endif + +#ifdef CONFIG_CPU_SH5 +#include +#endif + +#endif /* __ASM_SH_IRQ_H */ diff --git a/arch/sh/include/asm/irq_regs.h b/arch/sh/include/asm/irq_regs.h new file mode 100644 index 000000000000..3dd9c0b70270 --- /dev/null +++ b/arch/sh/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/asm/irqflags.h b/arch/sh/include/asm/irqflags.h new file mode 100644 index 000000000000..46e71da5be6b --- /dev/null +++ b/arch/sh/include/asm/irqflags.h @@ -0,0 +1,34 @@ +#ifndef __ASM_SH_IRQFLAGS_H +#define __ASM_SH_IRQFLAGS_H + +#ifdef CONFIG_SUPERH32 +#include "irqflags_32.h" +#else +#include "irqflags_64.h" +#endif + +#define raw_local_save_flags(flags) \ + do { (flags) = __raw_local_save_flags(); } while (0) + +static inline int raw_irqs_disabled_flags(unsigned long flags) +{ + return (flags != 0); +} + +static inline int raw_irqs_disabled(void) +{ + unsigned long flags = __raw_local_save_flags(); + + return raw_irqs_disabled_flags(flags); +} + +#define raw_local_irq_save(flags) \ + do { (flags) = __raw_local_irq_save(); } while (0) + +static inline void raw_local_irq_restore(unsigned long flags) +{ + if ((flags & 0xf0) != 0xf0) + raw_local_irq_enable(); +} + +#endif /* __ASM_SH_IRQFLAGS_H */ diff --git a/arch/sh/include/asm/irqflags_32.h b/arch/sh/include/asm/irqflags_32.h new file mode 100644 index 000000000000..60218f541340 --- /dev/null +++ b/arch/sh/include/asm/irqflags_32.h @@ -0,0 +1,99 @@ +#ifndef __ASM_SH_IRQFLAGS_32_H +#define __ASM_SH_IRQFLAGS_32_H + +static inline void raw_local_irq_enable(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and %1, %0\n\t" +#ifdef CONFIG_CPU_HAS_SR_RB + "stc r6_bank, %1\n\t" + "or %1, %0\n\t" +#endif + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~0x000000f0) + : "memory" + ); +} + +static inline void raw_local_irq_disable(void) +{ + unsigned long flags; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "or #0xf0, %0\n\t" + "ldc %0, sr\n\t" + : "=&z" (flags) + : /* no inputs */ + : "memory" + ); +} + +static inline void set_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "or %2, %0\n\t" + "and %3, %0\n\t" + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "r" (0x10000000), "r" (0xffffff0f) + : "memory" + ); +} + +static inline void clear_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and %2, %0\n\t" + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~0x10000000) + : "memory" + ); +} + +static inline unsigned long __raw_local_save_flags(void) +{ + unsigned long flags; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and #0xf0, %0\n\t" + : "=&z" (flags) + : /* no inputs */ + : "memory" + ); + + return flags; +} + +static inline unsigned long __raw_local_irq_save(void) +{ + unsigned long flags, __dummy; + + __asm__ __volatile__ ( + "stc sr, %1\n\t" + "mov %1, %0\n\t" + "or #0xf0, %0\n\t" + "ldc %0, sr\n\t" + "mov %1, %0\n\t" + "and #0xf0, %0\n\t" + : "=&z" (flags), "=&r" (__dummy) + : /* no inputs */ + : "memory" + ); + + return flags; +} + +#endif /* __ASM_SH_IRQFLAGS_32_H */ diff --git a/arch/sh/include/asm/irqflags_64.h b/arch/sh/include/asm/irqflags_64.h new file mode 100644 index 000000000000..88f65222c1d4 --- /dev/null +++ b/arch/sh/include/asm/irqflags_64.h @@ -0,0 +1,85 @@ +#ifndef __ASM_SH_IRQFLAGS_64_H +#define __ASM_SH_IRQFLAGS_64_H + +#include + +#define SR_MASK_LL 0x00000000000000f0LL +#define SR_BL_LL 0x0000000010000000LL + +static inline void raw_local_irq_enable(void) +{ + unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); +} + +static inline void raw_local_irq_disable(void) +{ + unsigned long long __dummy0, __dummy1 = SR_MASK_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "or %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); +} + +static inline void set_bl_bit(void) +{ + unsigned long long __dummy0, __dummy1 = SR_BL_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "or %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); + +} + +static inline void clear_bl_bit(void) +{ + unsigned long long __dummy0, __dummy1 = ~SR_BL_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); +} + +static inline unsigned long __raw_local_save_flags(void) +{ + unsigned long long __dummy = SR_MASK_LL; + unsigned long flags; + + __asm__ __volatile__ ( + "getcon " __SR ", %0\n\t" + "and %0, %1, %0" + : "=&r" (flags) + : "r" (__dummy)); + + return flags; +} + +static inline unsigned long __raw_local_irq_save(void) +{ + unsigned long long __dummy0, __dummy1 = SR_MASK_LL; + unsigned long flags; + + __asm__ __volatile__ ( + "getcon " __SR ", %1\n\t" + "or %1, r63, %0\n\t" + "or %1, %2, %1\n\t" + "putcon %1, " __SR "\n\t" + "and %0, %2, %0" + : "=&r" (flags), "=&r" (__dummy0) + : "r" (__dummy1)); + + return flags; +} + +#endif /* __ASM_SH_IRQFLAGS_64_H */ diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h new file mode 100644 index 000000000000..49cd69051a88 --- /dev/null +++ b/arch/sh/include/asm/kdebug.h @@ -0,0 +1,9 @@ +#ifndef __ASM_SH_KDEBUG_H +#define __ASM_SH_KDEBUG_H + +/* Grossly misnamed. */ +enum die_val { + DIE_TRAP, +}; + +#endif /* __ASM_SH_KDEBUG_H */ diff --git a/arch/sh/include/asm/kexec.h b/arch/sh/include/asm/kexec.h new file mode 100644 index 000000000000..00f4260ef09b --- /dev/null +++ b/arch/sh/include/asm/kexec.h @@ -0,0 +1,62 @@ +#ifndef __ASM_SH_KEXEC_H +#define __ASM_SH_KEXEC_H + +#include +#include + +/* + * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return. + * I.e. Maximum page that is mapped directly into kernel memory, + * and kmap is not required. + * + * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct + * calculation for the amount of memory directly mappable into the + * kernel memory space. + */ + +/* Maximum physical address we can use pages from */ +#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) +/* Maximum address we can reach in physical address mode */ +#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) +/* Maximum address we can use for the control code buffer */ +#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE + +#define KEXEC_CONTROL_CODE_SIZE 4096 + +/* The native architecture */ +#define KEXEC_ARCH KEXEC_ARCH_SH + +static inline void crash_setup_regs(struct pt_regs *newregs, + struct pt_regs *oldregs) +{ + if (oldregs) + memcpy(newregs, oldregs, sizeof(*newregs)); + else { + __asm__ __volatile__ ("mov r0, %0" : "=r" (newregs->regs[0])); + __asm__ __volatile__ ("mov r1, %0" : "=r" (newregs->regs[1])); + __asm__ __volatile__ ("mov r2, %0" : "=r" (newregs->regs[2])); + __asm__ __volatile__ ("mov r3, %0" : "=r" (newregs->regs[3])); + __asm__ __volatile__ ("mov r4, %0" : "=r" (newregs->regs[4])); + __asm__ __volatile__ ("mov r5, %0" : "=r" (newregs->regs[5])); + __asm__ __volatile__ ("mov r6, %0" : "=r" (newregs->regs[6])); + __asm__ __volatile__ ("mov r7, %0" : "=r" (newregs->regs[7])); + __asm__ __volatile__ ("mov r8, %0" : "=r" (newregs->regs[8])); + __asm__ __volatile__ ("mov r9, %0" : "=r" (newregs->regs[9])); + __asm__ __volatile__ ("mov r10, %0" : "=r" (newregs->regs[10])); + __asm__ __volatile__ ("mov r11, %0" : "=r" (newregs->regs[11])); + __asm__ __volatile__ ("mov r12, %0" : "=r" (newregs->regs[12])); + __asm__ __volatile__ ("mov r13, %0" : "=r" (newregs->regs[13])); + __asm__ __volatile__ ("mov r14, %0" : "=r" (newregs->regs[14])); + __asm__ __volatile__ ("mov r15, %0" : "=r" (newregs->regs[15])); + + __asm__ __volatile__ ("sts pr, %0" : "=r" (newregs->pr)); + __asm__ __volatile__ ("sts macl, %0" : "=r" (newregs->macl)); + __asm__ __volatile__ ("sts mach, %0" : "=r" (newregs->mach)); + + __asm__ __volatile__ ("stc gbr, %0" : "=r" (newregs->gbr)); + __asm__ __volatile__ ("stc sr, %0" : "=r" (newregs->sr)); + + newregs->pc = (unsigned long)current_text_addr(); + } +} +#endif /* __ASM_SH_KEXEC_H */ diff --git a/arch/sh/include/asm/kgdb.h b/arch/sh/include/asm/kgdb.h new file mode 100644 index 000000000000..24e42078f36f --- /dev/null +++ b/arch/sh/include/asm/kgdb.h @@ -0,0 +1,69 @@ +/* + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Based on original code by Glenn Engel, Jim Kingdon, + * David Grothe , Tigran Aivazian, and + * Amit S. Kale + * + * Super-H port based on sh-stub.c (Ben Lee and Steve Chamberlain) by + * Henry Bell + * + * Header file for low-level support for remote debug using GDB. + * + */ + +#ifndef __KGDB_H +#define __KGDB_H + +#include + +/* Same as pt_regs but has vbr in place of syscall_nr */ +struct kgdb_regs { + unsigned long regs[16]; + unsigned long pc; + unsigned long pr; + unsigned long sr; + unsigned long gbr; + unsigned long mach; + unsigned long macl; + unsigned long vbr; +}; + +/* State info */ +extern char kgdb_in_gdb_mode; +extern int kgdb_nofault; /* Ignore bus errors (in gdb mem access) */ +extern char in_nmi; /* Debounce flag to prevent NMI reentry*/ + +/* SCI */ +extern int kgdb_portnum; +extern int kgdb_baud; +extern char kgdb_parity; +extern char kgdb_bits; + +/* Init and interface stuff */ +extern int kgdb_init(void); +extern int (*kgdb_getchar)(void); +extern void (*kgdb_putchar)(int); + +/* Trap functions */ +typedef void (kgdb_debug_hook_t)(struct pt_regs *regs); +typedef void (kgdb_bus_error_hook_t)(void); +extern kgdb_debug_hook_t *kgdb_debug_hook; +extern kgdb_bus_error_hook_t *kgdb_bus_err_hook; + +/* Console */ +struct console; +void kgdb_console_write(struct console *co, const char *s, unsigned count); +extern int kgdb_console_setup(struct console *, char *); + +/* Prototypes for jmp fns */ +#define _JBLEN 9 +typedef int jmp_buf[_JBLEN]; +extern void longjmp(jmp_buf __jmpb, int __retval); +extern int setjmp(jmp_buf __jmpb); + +/* Forced breakpoint */ +#define breakpoint() __asm__ __volatile__("trapa #0x3c") + +#endif diff --git a/arch/sh/include/asm/kmap_types.h b/arch/sh/include/asm/kmap_types.h new file mode 100644 index 000000000000..84d565c696be --- /dev/null +++ b/arch/sh/include/asm/kmap_types.h @@ -0,0 +1,32 @@ +#ifndef __SH_KMAP_TYPES_H +#define __SH_KMAP_TYPES_H + +/* Dummy header just to define km_type. */ + + +#ifdef CONFIG_DEBUG_HIGHMEM +# define D(n) __KM_FENCE_##n , +#else +# define D(n) +#endif + +enum km_type { +D(0) KM_BOUNCE_READ, +D(1) KM_SKB_SUNRPC_DATA, +D(2) KM_SKB_DATA_SOFTIRQ, +D(3) KM_USER0, +D(4) KM_USER1, +D(5) KM_BIO_SRC_IRQ, +D(6) KM_BIO_DST_IRQ, +D(7) KM_PTE0, +D(8) KM_PTE1, +D(9) KM_IRQ0, +D(10) KM_IRQ1, +D(11) KM_SOFTIRQ0, +D(12) KM_SOFTIRQ1, +D(13) KM_TYPE_NR +}; + +#undef D + +#endif diff --git a/arch/sh/include/asm/lboxre2.h b/arch/sh/include/asm/lboxre2.h new file mode 100644 index 000000000000..e6d160504923 --- /dev/null +++ b/arch/sh/include/asm/lboxre2.h @@ -0,0 +1,27 @@ +#ifndef __ASM_SH_LBOXRE2_H +#define __ASM_SH_LBOXRE2_H + +/* + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * NTT COMWARE L-BOX RE2 support + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#define IRQ_CF1 9 /* CF1 */ +#define IRQ_CF0 10 /* CF0 */ +#define IRQ_INTD 11 /* INTD */ +#define IRQ_ETH1 12 /* Ether1 */ +#define IRQ_ETH0 13 /* Ether0 */ +#define IRQ_INTA 14 /* INTA */ + +void init_lboxre2_IRQ(void); + +#define __IO_PREFIX lboxre2 +#include + +#endif /* __ASM_SH_LBOXRE2_H */ diff --git a/arch/sh/include/asm/linkage.h b/arch/sh/include/asm/linkage.h new file mode 100644 index 000000000000..3565a4f4009f --- /dev/null +++ b/arch/sh/include/asm/linkage.h @@ -0,0 +1,7 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define __ALIGN .balign 4 +#define __ALIGN_STR ".balign 4" + +#endif diff --git a/arch/sh/include/asm/local.h b/arch/sh/include/asm/local.h new file mode 100644 index 000000000000..9ed9b9cb459a --- /dev/null +++ b/arch/sh/include/asm/local.h @@ -0,0 +1,7 @@ +#ifndef __ASM_SH_LOCAL_H +#define __ASM_SH_LOCAL_H + +#include + +#endif /* __ASM_SH_LOCAL_H */ + diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h new file mode 100644 index 000000000000..b2e4124070ae --- /dev/null +++ b/arch/sh/include/asm/machvec.h @@ -0,0 +1,70 @@ +/* + * include/asm-sh/machvec.h + * + * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ + +#ifndef _ASM_SH_MACHVEC_H +#define _ASM_SH_MACHVEC_H + +#include +#include +#include + +struct device; + +struct sh_machine_vector { + void (*mv_setup)(char **cmdline_p); + const char *mv_name; + int mv_nr_irqs; + + u8 (*mv_inb)(unsigned long); + u16 (*mv_inw)(unsigned long); + u32 (*mv_inl)(unsigned long); + void (*mv_outb)(u8, unsigned long); + void (*mv_outw)(u16, unsigned long); + void (*mv_outl)(u32, unsigned long); + + u8 (*mv_inb_p)(unsigned long); + u16 (*mv_inw_p)(unsigned long); + u32 (*mv_inl_p)(unsigned long); + void (*mv_outb_p)(u8, unsigned long); + void (*mv_outw_p)(u16, unsigned long); + void (*mv_outl_p)(u32, unsigned long); + + void (*mv_insb)(unsigned long, void *dst, unsigned long count); + void (*mv_insw)(unsigned long, void *dst, unsigned long count); + void (*mv_insl)(unsigned long, void *dst, unsigned long count); + void (*mv_outsb)(unsigned long, const void *src, unsigned long count); + void (*mv_outsw)(unsigned long, const void *src, unsigned long count); + void (*mv_outsl)(unsigned long, const void *src, unsigned long count); + + u8 (*mv_readb)(void __iomem *); + u16 (*mv_readw)(void __iomem *); + u32 (*mv_readl)(void __iomem *); + void (*mv_writeb)(u8, void __iomem *); + void (*mv_writew)(u16, void __iomem *); + void (*mv_writel)(u32, void __iomem *); + + int (*mv_irq_demux)(int irq); + + void (*mv_init_irq)(void); + void (*mv_init_pci)(void); + + void (*mv_heartbeat)(void); + + void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size); + void (*mv_ioport_unmap)(void __iomem *); +}; + +extern struct sh_machine_vector sh_mv; + +#define get_system_type() sh_mv.mv_name + +#define __initmv \ + __used __section(.machvec.init) + +#endif /* _ASM_SH_MACHVEC_H */ diff --git a/arch/sh/include/asm/magicpanelr2.h b/arch/sh/include/asm/magicpanelr2.h new file mode 100644 index 000000000000..c644a77ee357 --- /dev/null +++ b/arch/sh/include/asm/magicpanelr2.h @@ -0,0 +1,67 @@ +/* + * include/asm-sh/magicpanelr2.h + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * I/O addresses and bitmasks for Magic Panel Release 2 board + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ASM_SH_MAGICPANELR2_H +#define __ASM_SH_MAGICPANELR2_H + +#include + +#define __IO_PREFIX mpr2 +#include + + +#define SETBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) | mask, reg) +#define SETBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) | mask, reg) +#define SETBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) | mask, reg) +#define CLRBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) & ~mask, reg) +#define CLRBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) & ~mask, reg) +#define CLRBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) & ~mask, reg) + + +#define PA_LED PORT_PADR /* LED */ + + +/* BSC */ +#define CMNCR 0xA4FD0000UL +#define CS0BCR 0xA4FD0004UL +#define CS2BCR 0xA4FD0008UL +#define CS3BCR 0xA4FD000CUL +#define CS4BCR 0xA4FD0010UL +#define CS5ABCR 0xA4FD0014UL +#define CS5BBCR 0xA4FD0018UL +#define CS6ABCR 0xA4FD001CUL +#define CS6BBCR 0xA4FD0020UL +#define CS0WCR 0xA4FD0024UL +#define CS2WCR 0xA4FD0028UL +#define CS3WCR 0xA4FD002CUL +#define CS4WCR 0xA4FD0030UL +#define CS5AWCR 0xA4FD0034UL +#define CS5BWCR 0xA4FD0038UL +#define CS6AWCR 0xA4FD003CUL +#define CS6BWCR 0xA4FD0040UL + + +/* usb */ + +#define PORT_UTRCTL 0xA405012CUL +#define PORT_UCLKCR_W 0xA40A0008UL + +#define INTC_ICR0 0xA414FEE0UL +#define INTC_ICR1 0xA4140010UL +#define INTC_ICR2 0xA4140012UL + +/* MTD */ + +#define MPR2_MTD_BOOTLOADER_SIZE 0x00060000UL +#define MPR2_MTD_KERNEL_SIZE 0x00200000UL + +#endif /* __ASM_SH_MAGICPANELR2_H */ diff --git a/arch/sh/include/asm/mc146818rtc.h b/arch/sh/include/asm/mc146818rtc.h new file mode 100644 index 000000000000..0aee96a97330 --- /dev/null +++ b/arch/sh/include/asm/mc146818rtc.h @@ -0,0 +1,7 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef _ASM_MC146818RTC_H +#define _ASM_MC146818RTC_H + +#endif /* _ASM_MC146818RTC_H */ diff --git a/arch/sh/include/asm/microdev.h b/arch/sh/include/asm/microdev.h new file mode 100644 index 000000000000..1aed15856e11 --- /dev/null +++ b/arch/sh/include/asm/microdev.h @@ -0,0 +1,80 @@ +/* + * linux/include/asm-sh/microdev.h + * + * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) + * + * Definitions for the SuperH SH4-202 MicroDev board. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#ifndef __ASM_SH_MICRODEV_H +#define __ASM_SH_MICRODEV_H + +extern void init_microdev_irq(void); +extern void microdev_print_fpga_intc_status(void); + +/* + * The following are useful macros for manipulating the interrupt + * controller (INTC) on the CPU-board FPGA. should be noted that there + * is an INTC on the FPGA, and a separate INTC on the SH4-202 core - + * these are two different things, both of which need to be prorammed to + * correctly route - unfortunately, they have the same name and + * abbreviations! + */ +#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */ +#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interrupt mask to enable/disable INTC in CPU-board FPGA */ +#define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */ +#define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTSRC_REG (MICRODEV_FPGA_INTC_BASE+0x30ul) /* Interrupt Source Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */ + + +/* + * The following are the IRQ numbers for the Linux Kernel for external + * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'. + */ +#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ +#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */ +#define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */ +#define MICRODEV_LINUX_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ +#define MICRODEV_LINUX_IRQ_USB_HC 7 /* on-board USB HC */ +#define MICRODEV_LINUX_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ +#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */ +#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */ + +/* + * The following are the IRQ numbers for the INTC on the FPGA for + * external interrupts. i.e. the bits in the INTC registers in the + * FPGA. + */ +#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ +#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */ +#define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ +#define MICRODEV_FPGA_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ +#define MICRODEV_FPGA_IRQ_IDE1 14 /* SuperIO IDE #1 */ +#define MICRODEV_FPGA_IRQ_IDE2 15 /* SuperIO IDE #2 */ +#define MICRODEV_FPGA_IRQ_USB_HC 16 /* on-board USB HC */ +#define MICRODEV_FPGA_IRQ_ETHERNET 18 /* on-board Ethnernet */ + +#define MICRODEV_IRQ_PCI_INTA 8 +#define MICRODEV_IRQ_PCI_INTB 9 +#define MICRODEV_IRQ_PCI_INTC 10 +#define MICRODEV_IRQ_PCI_INTD 11 + +#define __IO_PREFIX microdev +#include + +#if defined(CONFIG_PCI) +unsigned char microdev_pci_inb(unsigned long port); +unsigned short microdev_pci_inw(unsigned long port); +unsigned long microdev_pci_inl(unsigned long port); +void microdev_pci_outb(unsigned char data, unsigned long port); +void microdev_pci_outw(unsigned short data, unsigned long port); +void microdev_pci_outl(unsigned long data, unsigned long port); +#endif + +#endif /* __ASM_SH_MICRODEV_H */ diff --git a/arch/sh/include/asm/migor.h b/arch/sh/include/asm/migor.h new file mode 100644 index 000000000000..10016e0f4a4e --- /dev/null +++ b/arch/sh/include/asm/migor.h @@ -0,0 +1,65 @@ +#ifndef __ASM_SH_MIGOR_H +#define __ASM_SH_MIGOR_H + +/* + * linux/include/asm-sh/migor.h + * + * Copyright (C) 2008 Renesas Solutions + * + * Portions Copyright (C) 2007 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include + +/* GPIO */ +#define PORT_PACR 0xa4050100 +#define PORT_PDCR 0xa4050106 +#define PORT_PECR 0xa4050108 +#define PORT_PHCR 0xa405010e +#define PORT_PJCR 0xa4050110 +#define PORT_PKCR 0xa4050112 +#define PORT_PLCR 0xa4050114 +#define PORT_PMCR 0xa4050116 +#define PORT_PRCR 0xa405011c +#define PORT_PTCR 0xa4050140 +#define PORT_PUCR 0xa4050142 +#define PORT_PVCR 0xa4050144 +#define PORT_PWCR 0xa4050146 +#define PORT_PXCR 0xa4050148 +#define PORT_PYCR 0xa405014a +#define PORT_PZCR 0xa405014c +#define PORT_PADR 0xa4050120 +#define PORT_PHDR 0xa405012e +#define PORT_PTDR 0xa4050160 +#define PORT_PWDR 0xa4050166 + +#define PORT_HIZCRA 0xa4050158 +#define PORT_HIZCRC 0xa405015c + +#define PORT_MSELCRB 0xa4050182 + +#define MSTPCR1 0xa4150034 +#define MSTPCR2 0xa4150038 + +#define PORT_PSELA 0xa405014e +#define PORT_PSELB 0xa4050150 +#define PORT_PSELC 0xa4050152 +#define PORT_PSELD 0xa4050154 +#define PORT_PSELE 0xa4050156 + +#define PORT_HIZCRA 0xa4050158 +#define PORT_HIZCRB 0xa405015a +#define PORT_HIZCRC 0xa405015c + +#define BSC_CS6ABCR 0xfec1001c + +#include + +int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); + +#endif /* __ASM_SH_MIGOR_H */ diff --git a/arch/sh/include/asm/mman.h b/arch/sh/include/asm/mman.h new file mode 100644 index 000000000000..156eb0225cf6 --- /dev/null +++ b/arch/sh/include/asm/mman.h @@ -0,0 +1,17 @@ +#ifndef __ASM_SH_MMAN_H +#define __ASM_SH_MMAN_H + +#include + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* __ASM_SH_MMAN_H */ diff --git a/arch/sh/include/asm/mmu.h b/arch/sh/include/asm/mmu.h new file mode 100644 index 000000000000..fdcb93bc6d11 --- /dev/null +++ b/arch/sh/include/asm/mmu.h @@ -0,0 +1,76 @@ +#ifndef __MMU_H +#define __MMU_H + +/* Default "unsigned long" context */ +typedef unsigned long mm_context_id_t[NR_CPUS]; + +typedef struct { +#ifdef CONFIG_MMU + mm_context_id_t id; + void *vdso; +#else + struct vm_list_struct *vmlist; + unsigned long end_brk; +#endif +#ifdef CONFIG_BINFMT_ELF_FDPIC + unsigned long exec_fdpic_loadmap; + unsigned long interp_fdpic_loadmap; +#endif +} mm_context_t; + +/* + * Privileged Space Mapping Buffer (PMB) definitions + */ +#define PMB_PASCR 0xff000070 +#define PMB_IRMCR 0xff000078 + +#define PMB_ADDR 0xf6100000 +#define PMB_DATA 0xf7100000 +#define PMB_ENTRY_MAX 16 +#define PMB_E_MASK 0x0000000f +#define PMB_E_SHIFT 8 + +#define PMB_SZ_16M 0x00000000 +#define PMB_SZ_64M 0x00000010 +#define PMB_SZ_128M 0x00000080 +#define PMB_SZ_512M 0x00000090 +#define PMB_SZ_MASK PMB_SZ_512M +#define PMB_C 0x00000008 +#define PMB_WT 0x00000001 +#define PMB_UB 0x00000200 +#define PMB_V 0x00000100 + +#define PMB_NO_ENTRY (-1) + +struct pmb_entry; + +struct pmb_entry { + unsigned long vpn; + unsigned long ppn; + unsigned long flags; + + /* + * 0 .. NR_PMB_ENTRIES for specific entry selection, or + * PMB_NO_ENTRY to search for a free one + */ + int entry; + + struct pmb_entry *next; + /* Adjacent entry link for contiguous multi-entry mappings */ + struct pmb_entry *link; +}; + +/* arch/sh/mm/pmb.c */ +int __set_pmb_entry(unsigned long vpn, unsigned long ppn, + unsigned long flags, int *entry); +int set_pmb_entry(struct pmb_entry *pmbe); +void clear_pmb_entry(struct pmb_entry *pmbe); +struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn, + unsigned long flags); +void pmb_free(struct pmb_entry *pmbe); +long pmb_remap(unsigned long virt, unsigned long phys, + unsigned long size, unsigned long flags); +void pmb_unmap(unsigned long addr); + +#endif /* __MMU_H */ + diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h new file mode 100644 index 000000000000..04c0c9733ad6 --- /dev/null +++ b/arch/sh/include/asm/mmu_context.h @@ -0,0 +1,185 @@ +/* + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2003 - 2007 Paul Mundt + * + * ASID handling idea taken from MIPS implementation. + */ +#ifndef __ASM_SH_MMU_CONTEXT_H +#define __ASM_SH_MMU_CONTEXT_H + +#ifdef __KERNEL__ +#include +#include +#include +#include +#include + +/* + * The MMU "context" consists of two things: + * (a) TLB cache version (or round, cycle whatever expression you like) + * (b) ASID (Address Space IDentifier) + */ +#define MMU_CONTEXT_ASID_MASK 0x000000ff +#define MMU_CONTEXT_VERSION_MASK 0xffffff00 +#define MMU_CONTEXT_FIRST_VERSION 0x00000100 +#define NO_CONTEXT 0 + +/* ASID is 8-bit value, so it can't be 0x100 */ +#define MMU_NO_ASID 0x100 + +#define asid_cache(cpu) (cpu_data[cpu].asid_cache) + +#ifdef CONFIG_MMU +#define cpu_context(cpu, mm) ((mm)->context.id[cpu]) + +#define cpu_asid(cpu, mm) \ + (cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK) + +/* + * Virtual Page Number mask + */ +#define MMU_VPN_MASK 0xfffff000 + +#if defined(CONFIG_SUPERH32) +#include "mmu_context_32.h" +#else +#include "mmu_context_64.h" +#endif + +/* + * Get MMU context if needed. + */ +static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu) +{ + unsigned long asid = asid_cache(cpu); + + /* Check if we have old version of context. */ + if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0) + /* It's up to date, do nothing */ + return; + + /* It's old, we need to get new context with new version. */ + if (!(++asid & MMU_CONTEXT_ASID_MASK)) { + /* + * We exhaust ASID of this version. + * Flush all TLB and start new cycle. + */ + flush_tlb_all(); + +#ifdef CONFIG_SUPERH64 + /* + * The SH-5 cache uses the ASIDs, requiring both the I and D + * cache to be flushed when the ASID is exhausted. Weak. + */ + flush_cache_all(); +#endif + + /* + * Fix version; Note that we avoid version #0 + * to distingush NO_CONTEXT. + */ + if (!asid) + asid = MMU_CONTEXT_FIRST_VERSION; + } + + cpu_context(cpu, mm) = asid_cache(cpu) = asid; +} + +/* + * Initialize the context related info for a new mm_struct + * instance. + */ +static inline int init_new_context(struct task_struct *tsk, + struct mm_struct *mm) +{ + int i; + + for (i = 0; i < num_online_cpus(); i++) + cpu_context(i, mm) = NO_CONTEXT; + + return 0; +} + +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +static inline void activate_context(struct mm_struct *mm, unsigned int cpu) +{ + get_mmu_context(mm, cpu); + set_asid(cpu_asid(cpu, mm)); +} + +static inline void switch_mm(struct mm_struct *prev, + struct mm_struct *next, + struct task_struct *tsk) +{ + unsigned int cpu = smp_processor_id(); + + if (likely(prev != next)) { + cpu_set(cpu, next->cpu_vm_mask); + set_TTB(next->pgd); + activate_context(next, cpu); + } else + if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) + activate_context(next, cpu); +} +#else +#define get_mmu_context(mm) do { } while (0) +#define init_new_context(tsk,mm) (0) +#define destroy_context(mm) do { } while (0) +#define set_asid(asid) do { } while (0) +#define get_asid() (0) +#define cpu_asid(cpu, mm) ({ (void)cpu; 0; }) +#define switch_and_save_asid(asid) (0) +#define set_TTB(pgd) do { } while (0) +#define get_TTB() (0) +#define activate_context(mm,cpu) do { } while (0) +#define switch_mm(prev,next,tsk) do { } while (0) +#endif /* CONFIG_MMU */ + +#define activate_mm(prev, next) switch_mm((prev),(next),NULL) +#define deactivate_mm(tsk,mm) do { } while (0) +#define enter_lazy_tlb(mm,tsk) do { } while (0) + +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4) +/* + * If this processor has an MMU, we need methods to turn it off/on .. + * paging_init() will also have to be updated for the processor in + * question. + */ +static inline void enable_mmu(void) +{ + unsigned int cpu = smp_processor_id(); + + /* Enable MMU */ + ctrl_outl(MMU_CONTROL_INIT, MMUCR); + ctrl_barrier(); + + if (asid_cache(cpu) == NO_CONTEXT) + asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION; + + set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK); +} + +static inline void disable_mmu(void) +{ + unsigned long cr; + + cr = ctrl_inl(MMUCR); + cr &= ~MMU_CONTROL_INIT; + ctrl_outl(cr, MMUCR); + + ctrl_barrier(); +} +#else +/* + * MMU control handlers for processors lacking memory + * management hardware. + */ +#define enable_mmu() do { } while (0) +#define disable_mmu() do { } while (0) +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_MMU_CONTEXT_H */ diff --git a/arch/sh/include/asm/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h new file mode 100644 index 000000000000..f4f9aebd68b7 --- /dev/null +++ b/arch/sh/include/asm/mmu_context_32.h @@ -0,0 +1,47 @@ +#ifndef __ASM_SH_MMU_CONTEXT_32_H +#define __ASM_SH_MMU_CONTEXT_32_H + +/* + * Destroy context related info for an mm_struct that is about + * to be put to rest. + */ +static inline void destroy_context(struct mm_struct *mm) +{ + /* Do nothing */ +} + +static inline void set_asid(unsigned long asid) +{ + unsigned long __dummy; + + __asm__ __volatile__ ("mov.l %2, %0\n\t" + "and %3, %0\n\t" + "or %1, %0\n\t" + "mov.l %0, %2" + : "=&r" (__dummy) + : "r" (asid), "m" (__m(MMU_PTEH)), + "r" (0xffffff00)); +} + +static inline unsigned long get_asid(void) +{ + unsigned long asid; + + __asm__ __volatile__ ("mov.l %1, %0" + : "=r" (asid) + : "m" (__m(MMU_PTEH))); + asid &= MMU_CONTEXT_ASID_MASK; + return asid; +} + +/* MMU_TTB is used for optimizing the fault handling. */ +static inline void set_TTB(pgd_t *pgd) +{ + ctrl_outl((unsigned long)pgd, MMU_TTB); +} + +static inline pgd_t *get_TTB(void) +{ + return (pgd_t *)ctrl_inl(MMU_TTB); +} +#endif /* __ASM_SH_MMU_CONTEXT_32_H */ diff --git a/arch/sh/include/asm/mmu_context_64.h b/arch/sh/include/asm/mmu_context_64.h new file mode 100644 index 000000000000..de121025d87f --- /dev/null +++ b/arch/sh/include/asm/mmu_context_64.h @@ -0,0 +1,78 @@ +#ifndef __ASM_SH_MMU_CONTEXT_64_H +#define __ASM_SH_MMU_CONTEXT_64_H + +/* + * sh64-specific mmu_context interface. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include + +#define SR_ASID_MASK 0xffffffffff00ffffULL +#define SR_ASID_SHIFT 16 + +/* + * Destroy context related info for an mm_struct that is about + * to be put to rest. + */ +static inline void destroy_context(struct mm_struct *mm) +{ + /* Well, at least free TLB entries */ + flush_tlb_mm(mm); +} + +static inline unsigned long get_asid(void) +{ + unsigned long long sr; + + asm volatile ("getcon " __SR ", %0\n\t" + : "=r" (sr)); + + sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK; + return (unsigned long) sr; +} + +/* Set ASID into SR */ +static inline void set_asid(unsigned long asid) +{ + unsigned long long sr, pc; + + asm volatile ("getcon " __SR ", %0" : "=r" (sr)); + + sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT); + + /* + * It is possible that this function may be inlined and so to avoid + * the assembler reporting duplicate symbols we make use of the + * gas trick of generating symbols using numerics and forward + * reference. + */ + asm volatile ("movi 1, %1\n\t" + "shlli %1, 28, %1\n\t" + "or %0, %1, %1\n\t" + "putcon %1, " __SR "\n\t" + "putcon %0, " __SSR "\n\t" + "movi 1f, %1\n\t" + "ori %1, 1 , %1\n\t" + "putcon %1, " __SPC "\n\t" + "rte\n" + "1:\n\t" + : "=r" (sr), "=r" (pc) : "0" (sr)); +} + +/* arch/sh/kernel/cpu/sh5/entry.S */ +extern unsigned long switch_and_save_asid(unsigned long new_asid); + +/* No spare register to twiddle, so use a software cache */ +extern pgd_t *mmu_pdtp_cache; + +#define set_TTB(pgd) (mmu_pdtp_cache = (pgd)) +#define get_TTB() (mmu_pdtp_cache) + +#endif /* __ASM_SH_MMU_CONTEXT_64_H */ diff --git a/arch/sh/include/asm/mmzone.h b/arch/sh/include/asm/mmzone.h new file mode 100644 index 000000000000..2969253c4042 --- /dev/null +++ b/arch/sh/include/asm/mmzone.h @@ -0,0 +1,48 @@ +#ifndef __ASM_SH_MMZONE_H +#define __ASM_SH_MMZONE_H + +#ifdef __KERNEL__ + +#ifdef CONFIG_NEED_MULTIPLE_NODES +extern struct pglist_data *node_data[]; +#define NODE_DATA(nid) (node_data[nid]) + +#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) +#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \ + NODE_DATA(nid)->node_spanned_pages) + +static inline int pfn_to_nid(unsigned long pfn) +{ + int nid; + + for (nid = 0; nid < MAX_NUMNODES; nid++) + if (pfn >= node_start_pfn(nid) && pfn <= node_end_pfn(nid)) + break; + + return nid; +} + +static inline struct pglist_data *pfn_to_pgdat(unsigned long pfn) +{ + return NODE_DATA(pfn_to_nid(pfn)); +} + +/* arch/sh/mm/numa.c */ +void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end); +#else +static inline void +setup_bootmem_node(int nid, unsigned long start, unsigned long end) +{ +} +#endif /* CONFIG_NEED_MULTIPLE_NODES */ + +/* Platform specific mem init */ +void __init plat_mem_setup(void); + +/* arch/sh/kernel/setup.c */ +void __init setup_bootmem_allocator(unsigned long start_pfn); +void __init __add_active_range(unsigned int nid, unsigned long start_pfn, + unsigned long end_pfn); + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_MMZONE_H */ diff --git a/arch/sh/include/asm/module.h b/arch/sh/include/asm/module.h new file mode 100644 index 000000000000..46eccd331660 --- /dev/null +++ b/arch/sh/include/asm/module.h @@ -0,0 +1,44 @@ +#ifndef _ASM_SH_MODULE_H +#define _ASM_SH_MODULE_H + +/* + * This file contains the SH architecture specific module code. + */ + +struct mod_arch_specific { + /* Nothing to see here .. */ +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +#ifdef CONFIG_CPU_LITTLE_ENDIAN +# ifdef CONFIG_CPU_SH2 +# define MODULE_PROC_FAMILY "SH2LE " +# elif defined CONFIG_CPU_SH3 +# define MODULE_PROC_FAMILY "SH3LE " +# elif defined CONFIG_CPU_SH4 +# define MODULE_PROC_FAMILY "SH4LE " +# elif defined CONFIG_CPU_SH5 +# define MODULE_PROC_FAMILY "SH5LE " +# else +# error unknown processor family +# endif +#else +# ifdef CONFIG_CPU_SH2 +# define MODULE_PROC_FAMILY "SH2BE " +# elif defined CONFIG_CPU_SH3 +# define MODULE_PROC_FAMILY "SH3BE " +# elif defined CONFIG_CPU_SH4 +# define MODULE_PROC_FAMILY "SH4BE " +# elif defined CONFIG_CPU_SH5 +# define MODULE_PROC_FAMILY "SH5BE " +# else +# error unknown processor family +# endif +#endif + +#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY + +#endif /* _ASM_SH_MODULE_H */ diff --git a/arch/sh/include/asm/msgbuf.h b/arch/sh/include/asm/msgbuf.h new file mode 100644 index 000000000000..517432343fb5 --- /dev/null +++ b/arch/sh/include/asm/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef __ASM_SH_MSGBUF_H +#define __ASM_SH_MSGBUF_H + +/* + * The msqid64_ds structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* __ASM_SH_MSGBUF_H */ diff --git a/arch/sh/include/asm/mutex.h b/arch/sh/include/asm/mutex.h new file mode 100644 index 000000000000..458c1f7fbc18 --- /dev/null +++ b/arch/sh/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h new file mode 100644 index 000000000000..77fb8bf02e4e --- /dev/null +++ b/arch/sh/include/asm/page.h @@ -0,0 +1,183 @@ +#ifndef __ASM_SH_PAGE_H +#define __ASM_SH_PAGE_H + +/* + * Copyright (C) 1999 Niibe Yutaka + */ + +#include + +/* PAGE_SHIFT determines the page size */ +#if defined(CONFIG_PAGE_SIZE_4KB) +# define PAGE_SHIFT 12 +#elif defined(CONFIG_PAGE_SIZE_8KB) +# define PAGE_SHIFT 13 +#elif defined(CONFIG_PAGE_SIZE_16KB) +# define PAGE_SHIFT 14 +#elif defined(CONFIG_PAGE_SIZE_64KB) +# define PAGE_SHIFT 16 +#else +# error "Bogus kernel page size?" +#endif + +#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) +#define PTE_MASK PAGE_MASK + +#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +#define HPAGE_SHIFT 16 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) +#define HPAGE_SHIFT 18 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +#define HPAGE_SHIFT 20 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) +#define HPAGE_SHIFT 22 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) +#define HPAGE_SHIFT 26 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) +#define HPAGE_SHIFT 29 +#endif + +#ifdef CONFIG_HUGETLB_PAGE +#define HPAGE_SIZE (1UL << HPAGE_SHIFT) +#define HPAGE_MASK (~(HPAGE_SIZE-1)) +#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT-PAGE_SHIFT) +#endif + +#ifndef __ASSEMBLY__ + +extern unsigned long shm_align_mask; +extern unsigned long max_low_pfn, min_low_pfn; +extern unsigned long memory_start, memory_end; + +extern void clear_page(void *to); +extern void copy_page(void *to, void *from); + +#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \ + (defined(CONFIG_CPU_SH5) || defined(CONFIG_CPU_SH4) || \ + defined(CONFIG_SH7705_CACHE_32KB)) +struct page; +struct vm_area_struct; +extern void clear_user_page(void *to, unsigned long address, struct page *page); +extern void copy_user_page(void *to, void *from, unsigned long address, + struct page *page); +#if defined(CONFIG_CPU_SH4) +extern void copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma); +#define __HAVE_ARCH_COPY_USER_HIGHPAGE +#endif +#else +#define clear_user_page(page, vaddr, pg) clear_page(page) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) +#endif + +/* + * These are used to make use of C type-checking.. + */ +#ifdef CONFIG_X2TLB +typedef struct { unsigned long pte_low, pte_high; } pte_t; +typedef struct { unsigned long long pgprot; } pgprot_t; +typedef struct { unsigned long long pgd; } pgd_t; +#define pte_val(x) \ + ((x).pte_low | ((unsigned long long)(x).pte_high << 32)) +#define __pte(x) \ + ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; }) +#elif defined(CONFIG_SUPERH32) +typedef struct { unsigned long pte_low; } pte_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct { unsigned long pgd; } pgd_t; +#define pte_val(x) ((x).pte_low) +#define __pte(x) ((pte_t) { (x) } ) +#else +typedef struct { unsigned long long pte_low; } pte_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct { unsigned long pgd; } pgd_t; +#define pte_val(x) ((x).pte_low) +#define __pte(x) ((pte_t) { (x) } ) +#endif + +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +typedef struct page *pgtable_t; + +#endif /* !__ASSEMBLY__ */ + +/* + * __MEMORY_START and SIZE are the physical addresses and size of RAM. + */ +#define __MEMORY_START CONFIG_MEMORY_START +#define __MEMORY_SIZE CONFIG_MEMORY_SIZE + +/* + * PAGE_OFFSET is the virtual address of the start of kernel address + * space. + */ +#define PAGE_OFFSET CONFIG_PAGE_OFFSET + +/* + * Virtual to physical RAM address translation. + * + * In 29 bit mode, the physical offset of RAM from address 0 is visible in + * the kernel virtual address space, and thus we don't have to take + * this into account when translating. However in 32 bit mode this offset + * is not visible (it is part of the PMB mapping) and so needs to be + * added or subtracted as required. + */ +#ifdef CONFIG_32BIT +#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START) +#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START)) +#else +#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET) +#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET)) +#endif + +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +/* + * PFN = physical frame number (ie PFN 0 == physical address 0) + * PFN_START is the PFN of the first page of RAM. By defining this we + * don't have struct page entries for the portion of address space + * between physical address 0 and the start of RAM. + */ +#define PFN_START (__MEMORY_START >> PAGE_SHIFT) +#define ARCH_PFN_OFFSET (PFN_START) +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#ifdef CONFIG_FLATMEM +#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn) +#endif +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#include +#include + +/* vDSO support */ +#ifdef CONFIG_VSYSCALL +#define __HAVE_ARCH_GATE_AREA +#endif + +/* + * Some drivers need to perform DMA into kmalloc'ed buffers + * and so we have to increase the kmalloc minalign for this. + */ +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES + +#ifdef CONFIG_SUPERH64 +/* + * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still + * happily generate {ld/st}.q pairs, requiring us to have 8-byte + * alignment to avoid traps. The kmalloc alignment is gauranteed by + * virtue of L1_CACHE_BYTES, requiring this to only be special cased + * for slab caches. + */ +#define ARCH_SLAB_MINALIGN 8 +#endif + +#endif /* __ASM_SH_PAGE_H */ diff --git a/arch/sh/include/asm/param.h b/arch/sh/include/asm/param.h new file mode 100644 index 000000000000..ae245afdfd6a --- /dev/null +++ b/arch/sh/include/asm/param.h @@ -0,0 +1,22 @@ +#ifndef __ASM_SH_PARAM_H +#define __ASM_SH_PARAM_H + +#ifdef __KERNEL__ +# define HZ CONFIG_HZ +# define USER_HZ 100 /* User interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* __ASM_SH_PARAM_H */ diff --git a/arch/sh/include/asm/parport.h b/arch/sh/include/asm/parport.h new file mode 100644 index 000000000000..f67ba60a2acd --- /dev/null +++ b/arch/sh/include/asm/parport.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 1999, 2000 Tim Waugh + * + * This file should only be included by drivers/parport/parport_pc.c. + */ +#ifndef __ASM_SH_PARPORT_H +#define __ASM_SH_PARPORT_H + +static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma); + +static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma) +{ + return parport_pc_find_isa_ports(autoirq, autodma); +} + +#endif /* __ASM_SH_PARPORT_H */ diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h new file mode 100644 index 000000000000..df1d383e18a5 --- /dev/null +++ b/arch/sh/include/asm/pci.h @@ -0,0 +1,144 @@ +#ifndef __ASM_SH_PCI_H +#define __ASM_SH_PCI_H + +#ifdef __KERNEL__ + +#include + +/* Can be used to override the logic in pci_scan_bus for skipping + already-configured bus numbers - to be used for buggy BIOSes + or architectures with incomplete PCI setup by the loader */ + +#define pcibios_assign_all_busses() 1 +#define pcibios_scan_all_fns(a, b) 0 + +/* + * A board can define one or more PCI channels that represent built-in (or + * external) PCI controllers. + */ +struct pci_channel { + struct pci_ops *pci_ops; + struct resource *io_resource; + struct resource *mem_resource; + int first_devfn; + int last_devfn; +}; + +/* + * Each board initializes this array and terminates it with a NULL entry. + */ +extern struct pci_channel board_pci_channels[]; + +#define PCIBIOS_MIN_IO board_pci_channels->io_resource->start +#define PCIBIOS_MIN_MEM board_pci_channels->mem_resource->start + +/* + * I/O routine helpers + */ +#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785) +#define PCI_IO_AREA 0xFE400000 +#define PCI_IO_SIZE 0x00400000 +#elif defined(CONFIG_CPU_SH5) +extern unsigned long PCI_IO_AREA; +#define PCI_IO_SIZE 0x00010000 +#else +#define PCI_IO_AREA 0xFE240000 +#define PCI_IO_SIZE 0x00040000 +#endif + +#define PCI_MEM_SIZE 0x01000000 + +#define SH4_PCIIOBR_MASK 0xFFFC0000 +#define pci_ioaddr(addr) (PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK)) + +#if defined(CONFIG_PCI) +#define is_pci_ioaddr(port) \ + (((port) >= PCIBIOS_MIN_IO) && \ + ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE))) +#define is_pci_memaddr(port) \ + (((port) >= PCIBIOS_MIN_MEM) && \ + ((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE))) +#else +#define is_pci_ioaddr(port) (0) +#define is_pci_memaddr(port) (0) +#endif + +struct pci_dev; + +extern void pcibios_set_master(struct pci_dev *dev); + +static inline void pcibios_penalize_isa_irq(int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +/* Dynamic DMA mapping stuff. + * SuperH has everything mapped statically like x86. + */ + +/* The PCI address space does equal the physical memory + * address space. The networking and block device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) + +#include +#include +#include +#include +#include + +/* pci_unmap_{single,page} being a nop depends upon the + * configuration. + */ +#ifdef CONFIG_SH_PCIDMA_NONCOHERENT +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) +#else +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) +#define pci_unmap_addr(PTR, ADDR_NAME) (0) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define pci_unmap_len(PTR, LEN_NAME) (0) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) +#endif + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif + +/* Board-specific fixup routines. */ +void pcibios_fixup(void); +int pcibios_init_platform(void); +int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin); + +#ifdef CONFIG_PCI_AUTO +int pciauto_assign_resources(int busno, struct pci_channel *hose); +#endif + +#endif /* __KERNEL__ */ + +/* generic pci stuff */ +#include + +/* generic DMA-mapping stuff */ +#include + +#endif /* __ASM_SH_PCI_H */ + diff --git a/arch/sh/include/asm/percpu.h b/arch/sh/include/asm/percpu.h new file mode 100644 index 000000000000..4db4b39a4399 --- /dev/null +++ b/arch/sh/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ARCH_SH_PERCPU +#define __ARCH_SH_PERCPU + +#include + +#endif /* __ARCH_SH_PERCPU */ diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h new file mode 100644 index 000000000000..84dd2db7104c --- /dev/null +++ b/arch/sh/include/asm/pgalloc.h @@ -0,0 +1,96 @@ +#ifndef __ASM_SH_PGALLOC_H +#define __ASM_SH_PGALLOC_H + +#include +#include + +#define QUICK_PGD 0 /* We preserve special mappings over free */ +#define QUICK_PT 1 /* Other page table pages that are zero on free */ + +static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, + pte_t *pte) +{ + set_pmd(pmd, __pmd((unsigned long)pte)); +} + +static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, + pgtable_t pte) +{ + set_pmd(pmd, __pmd((unsigned long)page_address(pte))); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +static inline void pgd_ctor(void *x) +{ + pgd_t *pgd = x; + + memcpy(pgd + USER_PTRS_PER_PGD, + swapper_pg_dir + USER_PTRS_PER_PGD, + (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); +} + +/* + * Allocate and free page tables. + */ +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor); +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + quicklist_free(QUICK_PGD, NULL, pgd); +} + +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); +} + +static inline pgtable_t pte_alloc_one(struct mm_struct *mm, + unsigned long address) +{ + struct page *page; + void *pg; + + pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); + if (!pg) + return NULL; + page = virt_to_page(pg); + pgtable_page_ctor(page); + return page; +} + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + quicklist_free(QUICK_PT, NULL, pte); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t pte) +{ + pgtable_page_dtor(pte); + quicklist_free_page(QUICK_PT, NULL, pte); +} + +#define __pte_free_tlb(tlb,pte) \ +do { \ + pgtable_page_dtor(pte); \ + tlb_remove_page((tlb), (pte)); \ +} while (0) + +/* + * allocating and freeing a pmd is trivial: the 1-entry pmd is + * inside the pgd, so has no extra memory associated with it. + */ + +#define pmd_free(mm, x) do { } while (0) +#define __pmd_free_tlb(tlb,x) do { } while (0) + +static inline void check_pgt_cache(void) +{ + quicklist_trim(QUICK_PGD, NULL, 25, 16); + quicklist_trim(QUICK_PT, NULL, 25, 16); +} + +#endif /* __ASM_SH_PGALLOC_H */ diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h new file mode 100644 index 000000000000..a4a8f8b93463 --- /dev/null +++ b/arch/sh/include/asm/pgtable.h @@ -0,0 +1,152 @@ +/* + * This file contains the functions and defines necessary to modify and + * use the SuperH page table tree. + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2002 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + */ +#ifndef __ASM_SH_PGTABLE_H +#define __ASM_SH_PGTABLE_H + +#include +#include + +#ifndef __ASSEMBLY__ +#include +#include + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) + +#endif /* !__ASSEMBLY__ */ + +/* + * Effective and physical address definitions, to aid with sign + * extension. + */ +#define NEFF 32 +#define NEFF_SIGN (1LL << (NEFF - 1)) +#define NEFF_MASK (-1LL << NEFF) + +#ifdef CONFIG_29BIT +#define NPHYS 29 +#else +#define NPHYS 32 +#endif + +#define NPHYS_SIGN (1LL << (NPHYS - 1)) +#define NPHYS_MASK (-1LL << NPHYS) + +/* + * traditional two-level paging structure + */ +/* PTE bits */ +#if defined(CONFIG_X2TLB) || defined(CONFIG_SUPERH64) +# define PTE_MAGNITUDE 3 /* 64-bit PTEs on extended mode SH-X2 TLB */ +#else +# define PTE_MAGNITUDE 2 /* 32-bit PTEs */ +#endif +#define PTE_SHIFT PAGE_SHIFT +#define PTE_BITS (PTE_SHIFT - PTE_MAGNITUDE) + +/* PGD bits */ +#define PGDIR_SHIFT (PTE_SHIFT + PTE_BITS) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* Entries per level */ +#define PTRS_PER_PTE (PAGE_SIZE / (1 << PTE_MAGNITUDE)) +#define PTRS_PER_PGD (PAGE_SIZE / sizeof(pgd_t)) + +#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +#ifdef CONFIG_32BIT +#define PHYS_ADDR_MASK 0xffffffff +#else +#define PHYS_ADDR_MASK 0x1fffffff +#endif + +#define PTE_PHYS_MASK (PHYS_ADDR_MASK & PAGE_MASK) + +#ifdef CONFIG_SUPERH32 +#define VMALLOC_START (P3SEG) +#else +#define VMALLOC_START (0xf0000000) +#endif +#define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE) + +#if defined(CONFIG_SUPERH32) +#include +#else +#include +#endif + +/* + * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page + * protection for execute, and considers it the same as a read. Also, write + * permission implies read permission. This is the closest we can get.. + * + * SH-X2 (SH7785) and later parts take this to the opposite end of the extreme, + * not only supporting separate execute, read, and write bits, but having + * completely separate permission bits for user and kernel space. + */ + /*xwr*/ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_EXECREAD +#define __P101 PAGE_EXECREAD +#define __P110 PAGE_COPY +#define __P111 PAGE_COPY + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_WRITEONLY +#define __S011 PAGE_SHARED +#define __S100 PAGE_EXECREAD +#define __S101 PAGE_EXECREAD +#define __S110 PAGE_RWX +#define __S111 PAGE_RWX + +typedef pte_t *pte_addr_t; + +#define kern_addr_valid(addr) (1) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +#define pte_pfn(x) ((unsigned long)(((x).pte_low >> PAGE_SHIFT))) + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \ + defined(CONFIG_SH7705_CACHE_32KB)) +struct mm_struct; +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); +#endif + +struct vm_area_struct; +extern void update_mmu_cache(struct vm_area_struct * vma, + unsigned long address, pte_t pte); +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; +extern void paging_init(void); +extern void page_table_range_init(unsigned long start, unsigned long end, + pgd_t *pgd); + +#include + +#endif /* __ASM_SH_PGTABLE_H */ diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h new file mode 100644 index 000000000000..72ea209195bd --- /dev/null +++ b/arch/sh/include/asm/pgtable_32.h @@ -0,0 +1,479 @@ +#ifndef __ASM_SH_PGTABLE_32_H +#define __ASM_SH_PGTABLE_32_H + +/* + * Linux PTEL encoding. + * + * Hardware and software bit definitions for the PTEL value (see below for + * notes on SH-X2 MMUs and 64-bit PTEs): + * + * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4). + * + * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the + * hardware PTEL value can't have the SH-bit set when MMUCR.IX is set, + * which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT). + * + * In order to keep this relatively clean, do not use these for defining + * SH-3 specific flags until all of the other unused bits have been + * exhausted. + * + * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE. + * + * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages. + * Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused. + * + * - On 29 bit platforms, bits 31 to 29 are used for the space attributes + * and timing control which (together with bit 0) are moved into the + * old-style PTEA on the parts that support it. + * + * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day. + * + * SH-X2 MMUs and extended PTEs + * + * SH-X2 supports an extended mode TLB with split data arrays due to the + * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and + * SZ bit placeholders still exist in data array 1, but are implemented as + * reserved bits, with the real logic existing in data array 2. + * + * The downside to this is that we can no longer fit everything in to a 32-bit + * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus + * side, this gives us quite a few spare bits to play with for future usage. + */ +/* Legacy and compat mode bits */ +#define _PAGE_WT 0x001 /* WT-bit on SH-4, 0 on SH-3 */ +#define _PAGE_HW_SHARED 0x002 /* SH-bit : shared among processes */ +#define _PAGE_DIRTY 0x004 /* D-bit : page changed */ +#define _PAGE_CACHABLE 0x008 /* C-bit : cachable */ +#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */ +#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */ +#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed*/ +#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */ +#define _PAGE_PRESENT 0x100 /* V-bit : page is valid */ +#define _PAGE_PROTNONE 0x200 /* software: if not present */ +#define _PAGE_ACCESSED 0x400 /* software: page referenced */ +#define _PAGE_FILE _PAGE_WT /* software: pagecache or swap? */ + +#define _PAGE_SZ_MASK (_PAGE_SZ0 | _PAGE_SZ1) +#define _PAGE_PR_MASK (_PAGE_RW | _PAGE_USER) + +/* Extended mode bits */ +#define _PAGE_EXT_ESZ0 0x0010 /* ESZ0-bit: Size of page */ +#define _PAGE_EXT_ESZ1 0x0020 /* ESZ1-bit: Size of page */ +#define _PAGE_EXT_ESZ2 0x0040 /* ESZ2-bit: Size of page */ +#define _PAGE_EXT_ESZ3 0x0080 /* ESZ3-bit: Size of page */ + +#define _PAGE_EXT_USER_EXEC 0x0100 /* EPR0-bit: User space executable */ +#define _PAGE_EXT_USER_WRITE 0x0200 /* EPR1-bit: User space writable */ +#define _PAGE_EXT_USER_READ 0x0400 /* EPR2-bit: User space readable */ + +#define _PAGE_EXT_KERN_EXEC 0x0800 /* EPR3-bit: Kernel space executable */ +#define _PAGE_EXT_KERN_WRITE 0x1000 /* EPR4-bit: Kernel space writable */ +#define _PAGE_EXT_KERN_READ 0x2000 /* EPR5-bit: Kernel space readable */ + +/* Wrapper for extended mode pgprot twiddling */ +#define _PAGE_EXT(x) ((unsigned long long)(x) << 32) + +/* software: moves to PTEA.TC (Timing Control) */ +#define _PAGE_PCC_AREA5 0x00000000 /* use BSC registers for area5 */ +#define _PAGE_PCC_AREA6 0x80000000 /* use BSC registers for area6 */ + +/* software: moves to PTEA.SA[2:0] (Space Attributes) */ +#define _PAGE_PCC_IODYN 0x00000001 /* IO space, dynamically sized bus */ +#define _PAGE_PCC_IO8 0x20000000 /* IO space, 8 bit bus */ +#define _PAGE_PCC_IO16 0x20000001 /* IO space, 16 bit bus */ +#define _PAGE_PCC_COM8 0x40000000 /* Common Memory space, 8 bit bus */ +#define _PAGE_PCC_COM16 0x40000001 /* Common Memory space, 16 bit bus */ +#define _PAGE_PCC_ATR8 0x60000000 /* Attribute Memory space, 8 bit bus */ +#define _PAGE_PCC_ATR16 0x60000001 /* Attribute Memory space, 6 bit bus */ + +/* Mask which drops unused bits from the PTEL value */ +#if defined(CONFIG_CPU_SH3) +#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED| \ + _PAGE_FILE | _PAGE_SZ1 | \ + _PAGE_HW_SHARED) +#elif defined(CONFIG_X2TLB) +/* Get rid of the legacy PR/SZ bits when using extended mode */ +#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | \ + _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK) +#else +#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE) +#endif + +#define _PAGE_FLAGS_HARDWARE_MASK (PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS)) + +/* Hardware flags, page size encoding */ +#if !defined(CONFIG_MMU) +# define _PAGE_FLAGS_HARD 0ULL +#elif defined(CONFIG_X2TLB) +# if defined(CONFIG_PAGE_SIZE_4KB) +# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ0) +# elif defined(CONFIG_PAGE_SIZE_8KB) +# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ1) +# elif defined(CONFIG_PAGE_SIZE_64KB) +# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ2) +# endif +#else +# if defined(CONFIG_PAGE_SIZE_4KB) +# define _PAGE_FLAGS_HARD _PAGE_SZ0 +# elif defined(CONFIG_PAGE_SIZE_64KB) +# define _PAGE_FLAGS_HARD _PAGE_SZ1 +# endif +#endif + +#if defined(CONFIG_X2TLB) +# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ3) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3) +# endif +#else +# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +# define _PAGE_SZHUGE (_PAGE_SZ1) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +# define _PAGE_SZHUGE (_PAGE_SZ0 | _PAGE_SZ1) +# endif +#endif + +/* + * Stub out _PAGE_SZHUGE if we don't have a good definition for it, + * to make pte_mkhuge() happy. + */ +#ifndef _PAGE_SZHUGE +# define _PAGE_SZHUGE (_PAGE_FLAGS_HARD) +#endif + +#define _PAGE_CHG_MASK \ + (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY) + +#ifndef __ASSEMBLY__ + +#if defined(CONFIG_X2TLB) /* SH-X2 TLB */ +#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_USER_READ | \ + _PAGE_EXT_USER_WRITE)) + +#define PAGE_EXECREAD __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \ + _PAGE_EXT_KERN_READ | \ + _PAGE_EXT_USER_EXEC | \ + _PAGE_EXT_USER_READ)) + +#define PAGE_COPY PAGE_EXECREAD + +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_USER_READ)) + +#define PAGE_WRITEONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_USER_WRITE)) + +#define PAGE_RWX __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_EXEC | \ + _PAGE_EXT_USER_WRITE | \ + _PAGE_EXT_USER_READ | \ + _PAGE_EXT_USER_EXEC)) + +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_EXEC)) + +#define PAGE_KERNEL_NOCACHE \ + __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_HW_SHARED | \ + _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_EXEC)) + +#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_EXEC)) + +#define PAGE_KERNEL_PCC(slot, type) \ + __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_EXEC) \ + (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ + (type)) + +#elif defined(CONFIG_MMU) /* SH-X TLB */ +#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \ + _PAGE_CACHABLE | _PAGE_ACCESSED | \ + _PAGE_FLAGS_HARD) + +#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_EXECREAD PAGE_READONLY +#define PAGE_RWX PAGE_SHARED +#define PAGE_WRITEONLY PAGE_SHARED + +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) + +#define PAGE_KERNEL_NOCACHE \ + __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_HW_SHARED | \ + _PAGE_FLAGS_HARD) + +#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) + +#define PAGE_KERNEL_PCC(slot, type) \ + __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ + (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ + (type)) +#else /* no mmu */ +#define PAGE_NONE __pgprot(0) +#define PAGE_SHARED __pgprot(0) +#define PAGE_COPY __pgprot(0) +#define PAGE_EXECREAD __pgprot(0) +#define PAGE_RWX __pgprot(0) +#define PAGE_READONLY __pgprot(0) +#define PAGE_WRITEONLY __pgprot(0) +#define PAGE_KERNEL __pgprot(0) +#define PAGE_KERNEL_NOCACHE __pgprot(0) +#define PAGE_KERNEL_RO __pgprot(0) + +#define PAGE_KERNEL_PCC(slot, type) \ + __pgprot(0) +#endif + +#endif /* __ASSEMBLY__ */ + +#ifndef __ASSEMBLY__ + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#ifdef CONFIG_X2TLB +static inline void set_pte(pte_t *ptep, pte_t pte) +{ + ptep->pte_high = pte.pte_high; + smp_wmb(); + ptep->pte_low = pte.pte_low; +} +#else +#define set_pte(pteptr, pteval) (*(pteptr) = pteval) +#endif + +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +/* + * (pmds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) + +#define pfn_pte(pfn, prot) \ + __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) \ + __pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#define pte_none(x) (!pte_val(x)) +#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE)) + +#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) + +#define pmd_none(x) (!pmd_val(x)) +#define pmd_present(x) (pmd_val(x)) +#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) +#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK) + +#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) +#define pte_page(x) pfn_to_page(pte_pfn(x)) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +#define pte_not_present(pte) (!((pte).pte_low & _PAGE_PRESENT)) +#define pte_dirty(pte) ((pte).pte_low & _PAGE_DIRTY) +#define pte_young(pte) ((pte).pte_low & _PAGE_ACCESSED) +#define pte_file(pte) ((pte).pte_low & _PAGE_FILE) +#define pte_special(pte) (0) + +#ifdef CONFIG_X2TLB +#define pte_write(pte) ((pte).pte_high & _PAGE_EXT_USER_WRITE) +#else +#define pte_write(pte) ((pte).pte_low & _PAGE_RW) +#endif + +#define PTE_BIT_FUNC(h,fn,op) \ +static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; } + +#ifdef CONFIG_X2TLB +/* + * We cheat a bit in the SH-X2 TLB case. As the permission bits are + * individually toggled (and user permissions are entirely decoupled from + * kernel permissions), we attempt to couple them a bit more sanely here. + */ +PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE); +PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE); +PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE); +#else +PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW); +PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW); +PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE); +#endif + +PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY); +PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY); +PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED); +PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED); + +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +/* + * Macro and implementation to make a page protection as uncachable. + */ +#define pgprot_writecombine(prot) \ + __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) + +#define pgprot_noncached pgprot_writecombine + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + * + * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) + */ +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte.pte_low &= _PAGE_CHG_MASK; + pte.pte_low |= pgprot_val(newprot); + +#ifdef CONFIG_X2TLB + pte.pte_high |= pgprot_val(newprot) >> 32; +#endif + + return pte; +} + +#define pmd_page_vaddr(pmd) ((unsigned long)pmd_val(pmd)) +#define pmd_page(pmd) (virt_to_page(pmd_val(pmd))) + +/* to find an entry in a page-table-directory. */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* Find an entry in the third-level page table.. */ +#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) +#define pte_offset_map(dir, address) pte_offset_kernel(dir, address) +#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address) + +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +#ifdef CONFIG_X2TLB +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \ + &(e), (e).pte_high, (e).pte_low) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e)) +#else +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) +#endif + +/* + * Encode and de-code a swap entry + * + * Constraints: + * _PAGE_FILE at bit 0 + * _PAGE_PRESENT at bit 8 + * _PAGE_PROTNONE at bit 9 + * + * For the normal case, we encode the swap type into bits 0:7 and the + * swap offset into bits 10:30. For the 64-bit PTE case, we keep the + * preserved bits in the low 32-bits and use the upper 32 as the swap + * offset (along with a 5-bit type), following the same approach as x86 + * PAE. This keeps the logic quite simple, and allows for a full 32 + * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with + * in the pte_low case. + * + * As is evident by the Alpha code, if we ever get a 64-bit unsigned + * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes + * much cleaner.. + * + * NOTE: We should set ZEROs at the position of _PAGE_PRESENT + * and _PAGE_PROTNONE bits + */ +#ifdef CONFIG_X2TLB +#define __swp_type(x) ((x).val & 0x1f) +#define __swp_offset(x) ((x).val >> 5) +#define __swp_entry(type, offset) ((swp_entry_t){ (type) | (offset) << 5}) +#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high }) +#define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val }) + +/* + * Encode and decode a nonlinear file mapping entry + */ +#define pte_to_pgoff(pte) ((pte).pte_high) +#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) }) + +#define PTE_FILE_MAX_BITS 32 +#else +#define __swp_type(x) ((x).val & 0xff) +#define __swp_offset(x) ((x).val >> 10) +#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10}) + +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 }) + +/* + * Encode and decode a nonlinear file mapping entry + */ +#define PTE_FILE_MAX_BITS 29 +#define pte_to_pgoff(pte) (pte_val(pte) >> 1) +#define pgoff_to_pte(off) ((pte_t) { ((off) << 1) | _PAGE_FILE }) +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_PGTABLE_32_H */ diff --git a/arch/sh/include/asm/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h new file mode 100644 index 000000000000..c78990cda557 --- /dev/null +++ b/arch/sh/include/asm/pgtable_64.h @@ -0,0 +1,314 @@ +#ifndef __ASM_SH_PGTABLE_64_H +#define __ASM_SH_PGTABLE_64_H + +/* + * include/asm-sh/pgtable_64.h + * + * This file contains the functions and defines necessary to modify and use + * the SuperH page table tree. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003, 2004 Paul Mundt + * Copyright (C) 2003, 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include + +/* + * Error outputs. + */ +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +/* + * Table setting routines. Used within arch/mm only. + */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) + +static __inline__ void set_pte(pte_t *pteptr, pte_t pteval) +{ + unsigned long long x = ((unsigned long long) pteval.pte_low); + unsigned long long *xp = (unsigned long long *) pteptr; + /* + * Sign-extend based on NPHYS. + */ + *(xp) = (x & NPHYS_SIGN) ? (x | NPHYS_MASK) : x; +} +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep) +{ + pmd_val(*pmdp) = (unsigned long) ptep; +} + +/* + * PGD defines. Top level. + */ + +/* To find an entry in a generic PGD. */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define __pgd_offset(address) pgd_index(address) +#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) + +/* To find an entry in a kernel PGD. */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* + * PMD level access routines. Same notes as above. + */ +#define _PMD_EMPTY 0x0 +/* Either the PMD is empty or present, it's not paged out */ +#define pmd_present(pmd_entry) (pmd_val(pmd_entry) & _PAGE_PRESENT) +#define pmd_clear(pmd_entry_p) (set_pmd((pmd_entry_p), __pmd(_PMD_EMPTY))) +#define pmd_none(pmd_entry) (pmd_val((pmd_entry)) == _PMD_EMPTY) +#define pmd_bad(pmd_entry) ((pmd_val(pmd_entry) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) + +#define pmd_page_vaddr(pmd_entry) \ + ((unsigned long) __va(pmd_val(pmd_entry) & PAGE_MASK)) + +#define pmd_page(pmd) \ + (virt_to_page(pmd_val(pmd))) + +/* PMD to PTE dereferencing */ +#define pte_index(address) \ + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) + +#define pte_offset_kernel(dir, addr) \ + ((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr))) + +#define pte_offset_map(dir,addr) pte_offset_kernel(dir, addr) +#define pte_offset_map_nested(dir,addr) pte_offset_kernel(dir, addr) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +#ifndef __ASSEMBLY__ +#define IOBASE_VADDR 0xff000000 +#define IOBASE_END 0xffffffff + +/* + * PTEL coherent flags. + * See Chapter 17 ST50 CPU Core Volume 1, Architecture. + */ +/* The bits that are required in the SH-5 TLB are placed in the h/w-defined + positions, to avoid expensive bit shuffling on every refill. The remaining + bits are used for s/w purposes and masked out on each refill. + + Note, the PTE slots are used to hold data of type swp_entry_t when a page is + swapped out. Only the _PAGE_PRESENT flag is significant when the page is + swapped out, and it must be placed so that it doesn't overlap either the + type or offset fields of swp_entry_t. For x86, offset is at [31:8] and type + at [6:1], with _PAGE_PRESENT at bit 0 for both pte_t and swp_entry_t. This + scheme doesn't map to SH-5 because bit [0] controls cacheability. So bit + [2] is used for _PAGE_PRESENT and the type field of swp_entry_t is split + into 2 pieces. That is handled by SWP_ENTRY and SWP_TYPE below. */ +#define _PAGE_WT 0x001 /* CB0: if cacheable, 1->write-thru, 0->write-back */ +#define _PAGE_DEVICE 0x001 /* CB0: if uncacheable, 1->device (i.e. no write-combining or reordering at bus level) */ +#define _PAGE_CACHABLE 0x002 /* CB1: uncachable/cachable */ +#define _PAGE_PRESENT 0x004 /* software: page referenced */ +#define _PAGE_FILE 0x004 /* software: only when !present */ +#define _PAGE_SIZE0 0x008 /* SZ0-bit : size of page */ +#define _PAGE_SIZE1 0x010 /* SZ1-bit : size of page */ +#define _PAGE_SHARED 0x020 /* software: reflects PTEH's SH */ +#define _PAGE_READ 0x040 /* PR0-bit : read access allowed */ +#define _PAGE_EXECUTE 0x080 /* PR1-bit : execute access allowed */ +#define _PAGE_WRITE 0x100 /* PR2-bit : write access allowed */ +#define _PAGE_USER 0x200 /* PR3-bit : user space access allowed */ +#define _PAGE_DIRTY 0x400 /* software: page accessed in write */ +#define _PAGE_ACCESSED 0x800 /* software: page referenced */ + +/* Mask which drops software flags */ +#define _PAGE_FLAGS_HARDWARE_MASK 0xfffffffffffff3dbLL + +/* + * HugeTLB support + */ +#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +#define _PAGE_SZHUGE (_PAGE_SIZE0) +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +#define _PAGE_SZHUGE (_PAGE_SIZE1) +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) +#define _PAGE_SZHUGE (_PAGE_SIZE0 | _PAGE_SIZE1) +#endif + +/* + * Stub out _PAGE_SZHUGE if we don't have a good definition for it, + * to make pte_mkhuge() happy. + */ +#ifndef _PAGE_SZHUGE +# define _PAGE_SZHUGE (0) +#endif + +/* + * Default flags for a Kernel page. + * This is fundametally also SHARED because the main use of this define + * (other than for PGD/PMD entries) is for the VMALLOC pool which is + * contextless. + * + * _PAGE_EXECUTE is required for modules + * + */ +#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ + _PAGE_EXECUTE | \ + _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_DIRTY | \ + _PAGE_SHARED) + +/* Default flags for a User page */ +#define _PAGE_TABLE (_KERNPG_TABLE | _PAGE_USER) + +#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) + +/* + * We have full permissions (Read/Write/Execute/Shared). + */ +#define _PAGE_COMMON (_PAGE_PRESENT | _PAGE_USER | \ + _PAGE_CACHABLE | _PAGE_ACCESSED) + +#define PAGE_NONE __pgprot(_PAGE_CACHABLE | _PAGE_ACCESSED) +#define PAGE_SHARED __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_WRITE | \ + _PAGE_SHARED) +#define PAGE_EXECREAD __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_EXECUTE) + +/* + * We need to include PAGE_EXECUTE in PAGE_COPY because it is the default + * protection mode for the stack. + */ +#define PAGE_COPY PAGE_EXECREAD + +#define PAGE_READONLY __pgprot(_PAGE_COMMON | _PAGE_READ) +#define PAGE_WRITEONLY __pgprot(_PAGE_COMMON | _PAGE_WRITE) +#define PAGE_RWX __pgprot(_PAGE_COMMON | _PAGE_READ | \ + _PAGE_WRITE | _PAGE_EXECUTE) +#define PAGE_KERNEL __pgprot(_KERNPG_TABLE) + +#define PAGE_KERNEL_NOCACHE \ + __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ + _PAGE_EXECUTE | _PAGE_ACCESSED | \ + _PAGE_DIRTY | _PAGE_SHARED) + +/* Make it a device mapping for maximum safety (e.g. for mapping device + registers into user-space via /dev/map). */ +#define pgprot_noncached(x) __pgprot(((x).pgprot & ~(_PAGE_CACHABLE)) | _PAGE_DEVICE) +#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) + +/* + * Handling allocation failures during page table setup. + */ +extern void __handle_bad_pmd_kernel(pmd_t * pmd); +#define __handle_bad_pmd(x) __handle_bad_pmd_kernel(x) + +/* + * PTE level access routines. + * + * Note1: + * It's the tree walk leaf. This is physical address to be stored. + * + * Note 2: + * Regarding the choice of _PTE_EMPTY: + + We must choose a bit pattern that cannot be valid, whether or not the page + is present. bit[2]==1 => present, bit[2]==0 => swapped out. If swapped + out, bits [31:8], [6:3], [1:0] are under swapper control, so only bit[7] is + left for us to select. If we force bit[7]==0 when swapped out, we could use + the combination bit[7,2]=2'b10 to indicate an empty PTE. Alternatively, if + we force bit[7]==1 when swapped out, we can use all zeroes to indicate + empty. This is convenient, because the page tables get cleared to zero + when they are allocated. + + */ +#define _PTE_EMPTY 0x0 +#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) +#define pte_clear(mm,addr,xp) (set_pte_at(mm, addr, xp, __pte(_PTE_EMPTY))) +#define pte_none(x) (pte_val(x) == _PTE_EMPTY) + +/* + * Some definitions to translate between mem_map, PTEs, and page + * addresses: + */ + +/* + * Given a PTE, return the index of the mem_map[] entry corresponding + * to the page frame the PTE. Get the absolute physical address, make + * a relative physical address and translate it to an index. + */ +#define pte_pagenr(x) (((unsigned long) (pte_val(x)) - \ + __MEMORY_START) >> PAGE_SHIFT) + +/* + * Given a PTE, return the "struct page *". + */ +#define pte_page(x) (mem_map + pte_pagenr(x)) + +/* + * Return number of (down rounded) MB corresponding to x pages. + */ +#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) + + +/* + * The following have defined behavior only work if pte_present() is true. + */ +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } +static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } +static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; } +static inline int pte_special(pte_t pte){ return 0; } + +static inline pte_t pte_wrprotect(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_WRITE)); return pte; } +static inline pte_t pte_mkclean(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; } +static inline pte_t pte_mkold(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; } +static inline pte_t pte_mkwrite(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_WRITE)); return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; } +static inline pte_t pte_mkhuge(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; } +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + + +/* + * Conversion functions: convert a page and protection to a page entry. + * + * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) + */ +#define mk_pte(page,pgprot) \ +({ \ + pte_t __pte; \ + \ + set_pte(&__pte, __pte((((page)-mem_map) << PAGE_SHIFT) | \ + __MEMORY_START | pgprot_val((pgprot)))); \ + __pte; \ +}) + +/* + * This takes a (absolute) physical page address that is used + * by the remapping functions + */ +#define mk_pte_phys(physpage, pgprot) \ +({ pte_t __pte; set_pte(&__pte, __pte(physpage | pgprot_val(pgprot))); __pte; }) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; } + +/* Encode and decode a swap entry */ +#define __swp_type(x) (((x).val & 3) + (((x).val >> 1) & 0x3c)) +#define __swp_offset(x) ((x).val >> 8) +#define __swp_entry(type, offset) ((swp_entry_t) { ((offset << 8) + ((type & 0x3c) << 1) + (type & 3)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +/* Encode and decode a nonlinear file mapping entry */ +#define PTE_FILE_MAX_BITS 29 +#define pte_to_pgoff(pte) (pte_val(pte)) +#define pgoff_to_pte(off) ((pte_t) { (off) | _PAGE_FILE }) + +#endif /* !__ASSEMBLY__ */ + +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#endif /* __ASM_SH_PGTABLE_64_H */ diff --git a/arch/sh/include/asm/pm.h b/arch/sh/include/asm/pm.h new file mode 100644 index 000000000000..56fdbd6b1c94 --- /dev/null +++ b/arch/sh/include/asm/pm.h @@ -0,0 +1,17 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright 2006 (c) Andriy Skulysh + * + */ +#ifndef __ASM_SH_PM_H +#define __ASM_SH_PM_H + +extern u8 wakeup_start; +extern u8 wakeup_end; + +void pm_enter(void); + +#endif diff --git a/arch/sh/include/asm/poll.h b/arch/sh/include/asm/poll.h new file mode 100644 index 000000000000..c98509d3149e --- /dev/null +++ b/arch/sh/include/asm/poll.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/asm/posix_types.h b/arch/sh/include/asm/posix_types.h new file mode 100644 index 000000000000..4eeb723aee7e --- /dev/null +++ b/arch/sh/include/asm/posix_types.h @@ -0,0 +1,13 @@ +#ifdef __KERNEL__ +# ifdef CONFIG_SUPERH32 +# include "posix_types_32.h" +# else +# include "posix_types_64.h" +# endif +#else +# ifdef __SH5__ +# include "posix_types_64.h" +# else +# include "posix_types_32.h" +# endif +#endif /* __KERNEL__ */ diff --git a/arch/sh/include/asm/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h new file mode 100644 index 000000000000..0a3d2f54ab27 --- /dev/null +++ b/arch/sh/include/asm/posix_types_32.h @@ -0,0 +1,122 @@ +#ifndef __ASM_SH_POSIX_TYPES_H +#define __ASM_SH_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* __ASM_SH_POSIX_TYPES_H */ diff --git a/arch/sh/include/asm/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h new file mode 100644 index 000000000000..0620317a6f0f --- /dev/null +++ b/arch/sh/include/asm/posix_types_64.h @@ -0,0 +1,131 @@ +#ifndef __ASM_SH64_POSIX_TYPES_H +#define __ASM_SH64_POSIX_TYPES_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * include/asm-sh64/posix_types.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef long unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* __ASM_SH64_POSIX_TYPES_H */ diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h new file mode 100644 index 000000000000..15d9f92ca383 --- /dev/null +++ b/arch/sh/include/asm/processor.h @@ -0,0 +1,66 @@ +#ifndef __ASM_SH_PROCESSOR_H +#define __ASM_SH_PROCESSOR_H + +#include +#include + +#ifndef __ASSEMBLY__ +/* + * CPU type and hardware bug flags. Kept separately for each CPU. + * + * Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry + * in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c + * for parsing the subtype in get_cpu_subtype(). + */ +enum cpu_type { + /* SH-2 types */ + CPU_SH7619, + + /* SH-2A types */ + CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG, + + /* SH-3 types */ + CPU_SH7705, CPU_SH7706, CPU_SH7707, + CPU_SH7708, CPU_SH7708S, CPU_SH7708R, + CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712, + CPU_SH7720, CPU_SH7721, CPU_SH7729, + + /* SH-4 types */ + CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R, + CPU_SH7760, CPU_SH4_202, CPU_SH4_501, + + /* SH-4A types */ + CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, + CPU_SH7723, CPU_SHX3, + + /* SH4AL-DSP types */ + CPU_SH7343, CPU_SH7722, CPU_SH7366, + + /* SH-5 types */ + CPU_SH5_101, CPU_SH5_103, + + /* Unknown subtype */ + CPU_SH_NONE +}; + +/* Forward decl */ +struct sh_cpuinfo; + +/* arch/sh/kernel/setup.c */ +const char *get_cpu_subtype(struct sh_cpuinfo *c); + +#ifdef CONFIG_VSYSCALL +int vsyscall_init(void); +#else +#define vsyscall_init() do { } while (0) +#endif + +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_SUPERH32 +# include "processor_32.h" +#else +# include "processor_64.h" +#endif + +#endif /* __ASM_SH_PROCESSOR_H */ diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h new file mode 100644 index 000000000000..0dadd75bd93c --- /dev/null +++ b/arch/sh/include/asm/processor_32.h @@ -0,0 +1,216 @@ +/* + * include/asm-sh/processor.h + * + * Copyright (C) 1999, 2000 Niibe Yutaka + * Copyright (C) 2002, 2003 Paul Mundt + */ + +#ifndef __ASM_SH_PROCESSOR_32_H +#define __ASM_SH_PROCESSOR_32_H +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n.align 2\n1:":"=z" (pc)); pc; }) + +/* Core Processor Version Register */ +#define CCN_PVR 0xff000030 +#define CCN_CVR 0xff000040 +#define CCN_PRR 0xff000044 + +struct sh_cpuinfo { + unsigned int type; + int cut_major, cut_minor; + unsigned long loops_per_jiffy; + unsigned long asid_cache; + + struct cache_info icache; /* Primary I-cache */ + struct cache_info dcache; /* Primary D-cache */ + struct cache_info scache; /* Secondary cache */ + + unsigned long flags; +} __attribute__ ((aligned(L1_CACHE_BYTES))); + +extern struct sh_cpuinfo cpu_data[]; +#define boot_cpu_data cpu_data[0] +#define current_cpu_data cpu_data[smp_processor_id()] +#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] + +/* + * User space process size: 2GB. + * + * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff + */ +#define TASK_SIZE 0x7c000000UL + +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) + +/* + * Bit of SR register + * + * FD-bit: + * When it's set, it means the processor doesn't have right to use FPU, + * and it results exception when the floating operation is executed. + * + * IMASK-bit: + * Interrupt level mask + */ +#define SR_DSP 0x00001000 +#define SR_IMASK 0x000000f0 +#define SR_FD 0x00008000 + +/* + * FPU structure and data + */ + +struct sh_fpu_hard_struct { + unsigned long fp_regs[16]; + unsigned long xfp_regs[16]; + unsigned long fpscr; + unsigned long fpul; + + long status; /* software status information */ +}; + +/* Dummy fpu emulator */ +struct sh_fpu_soft_struct { + unsigned long fp_regs[16]; + unsigned long xfp_regs[16]; + unsigned long fpscr; + unsigned long fpul; + + unsigned char lookahead; + unsigned long entry_pc; +}; + +union sh_fpu_union { + struct sh_fpu_hard_struct hard; + struct sh_fpu_soft_struct soft; +}; + +struct thread_struct { + /* Saved registers when thread is descheduled */ + unsigned long sp; + unsigned long pc; + + /* Hardware debugging registers */ + unsigned long ubc_pc; + + /* floating point info */ + union sh_fpu_union fpu; +}; + +/* Count of active tasks with UBC settings */ +extern int ubc_usercnt; + +#define INIT_THREAD { \ + .sp = sizeof(init_stack) + (long) &init_stack, \ +} + +/* + * Do necessary setup to start up a newly executed thread. + */ +#define start_thread(regs, new_pc, new_sp) \ + set_fs(USER_DS); \ + regs->pr = 0; \ + regs->sr = SR_FD; /* User mode. */ \ + regs->pc = new_pc; \ + regs->regs[15] = new_sp + +/* Forward declaration, a strange C thing */ +struct task_struct; +struct mm_struct; + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +/* + * create a kernel thread without removing it from tasklists + */ +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* Copy and release all segment info associated with a VM */ +#define copy_segments(p, mm) do { } while(0) +#define release_segments(mm) do { } while(0) + +/* + * FPU lazy state save handling. + */ + +static __inline__ void disable_fpu(void) +{ + unsigned long __dummy; + + /* Set FD flag in SR */ + __asm__ __volatile__("stc sr, %0\n\t" + "or %1, %0\n\t" + "ldc %0, sr" + : "=&r" (__dummy) + : "r" (SR_FD)); +} + +static __inline__ void enable_fpu(void) +{ + unsigned long __dummy; + + /* Clear out FD flag in SR */ + __asm__ __volatile__("stc sr, %0\n\t" + "and %1, %0\n\t" + "ldc %0, sr" + : "=&r" (__dummy) + : "r" (~SR_FD)); +} + +/* Double presision, NANS as NANS, rounding to nearest, no exceptions */ +#define FPSCR_INIT 0x00080000 + +#define FPSCR_CAUSE_MASK 0x0001f000 /* Cause bits */ +#define FPSCR_FLAG_MASK 0x0000007c /* Flag bits */ + +/* + * Return saved PC of a blocked thread. + */ +#define thread_saved_pc(tsk) (tsk->thread.pc) + +void show_trace(struct task_struct *tsk, unsigned long *sp, + struct pt_regs *regs); +extern unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc) +#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[15]) + +#define cpu_sleep() __asm__ __volatile__ ("sleep" : : : "memory") +#define cpu_relax() barrier() + +#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \ + defined(CONFIG_CPU_SH4) +#define PREFETCH_STRIDE L1_CACHE_BYTES +#define ARCH_HAS_PREFETCH +#define ARCH_HAS_PREFETCHW +static inline void prefetch(void *x) +{ + __asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory"); +} + +#define prefetchw(x) prefetch(x) +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_PROCESSOR_32_H */ diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h new file mode 100644 index 000000000000..770d5169983b --- /dev/null +++ b/arch/sh/include/asm/processor_64.h @@ -0,0 +1,275 @@ +#ifndef __ASM_SH_PROCESSOR_64_H +#define __ASM_SH_PROCESSOR_64_H + +/* + * include/asm-sh/processor_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASSEMBLY__ + +#include +#include +#include +#include +#include +#include + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ \ +void *pc; \ +unsigned long long __dummy = 0; \ +__asm__("gettr tr0, %1\n\t" \ + "pta 4, tr0\n\t" \ + "gettr tr0, %0\n\t" \ + "ptabs %1, tr0\n\t" \ + :"=r" (pc), "=r" (__dummy) \ + : "1" (__dummy)); \ +pc; }) + +/* + * TLB information structure + * + * Defined for both I and D tlb, per-processor. + */ +struct tlb_info { + unsigned long long next; + unsigned long long first; + unsigned long long last; + + unsigned int entries; + unsigned int step; + + unsigned long flags; +}; + +struct sh_cpuinfo { + enum cpu_type type; + unsigned long loops_per_jiffy; + unsigned long asid_cache; + + unsigned int cpu_clock, master_clock, bus_clock, module_clock; + + /* Cache info */ + struct cache_info icache; + struct cache_info dcache; + struct cache_info scache; + + /* TLB info */ + struct tlb_info itlb; + struct tlb_info dtlb; + + unsigned long flags; +}; + +extern struct sh_cpuinfo cpu_data[]; +#define boot_cpu_data cpu_data[0] +#define current_cpu_data cpu_data[smp_processor_id()] +#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] + +#endif + +/* + * User space process size: 2GB - 4k. + */ +#define TASK_SIZE 0x7ffff000UL + +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) + +/* + * Bit of SR register + * + * FD-bit: + * When it's set, it means the processor doesn't have right to use FPU, + * and it results exception when the floating operation is executed. + * + * IMASK-bit: + * Interrupt level mask + * + * STEP-bit: + * Single step bit + * + */ +#if defined(CONFIG_SH64_SR_WATCH) +#define SR_MMU 0x84000000 +#else +#define SR_MMU 0x80000000 +#endif + +#define SR_IMASK 0x000000f0 +#define SR_FD 0x00008000 +#define SR_SSTEP 0x08000000 + +#ifndef __ASSEMBLY__ + +/* + * FPU structure and data : require 8-byte alignment as we need to access it + with fld.p, fst.p + */ + +struct sh_fpu_hard_struct { + unsigned long fp_regs[64]; + unsigned int fpscr; + /* long status; * software status information */ +}; + +#if 0 +/* Dummy fpu emulator */ +struct sh_fpu_soft_struct { + unsigned long long fp_regs[32]; + unsigned int fpscr; + unsigned char lookahead; + unsigned long entry_pc; +}; +#endif + +union sh_fpu_union { + struct sh_fpu_hard_struct hard; + /* 'hard' itself only produces 32 bit alignment, yet we need + to access it using 64 bit load/store as well. */ + unsigned long long alignment_dummy; +}; + +struct thread_struct { + unsigned long sp; + unsigned long pc; + /* This stores the address of the pt_regs built during a context + switch, or of the register save area built for a kernel mode + exception. It is used for backtracing the stack of a sleeping task + or one that traps in kernel mode. */ + struct pt_regs *kregs; + /* This stores the address of the pt_regs constructed on entry from + user mode. It is a fixed value over the lifetime of a process, or + NULL for a kernel thread. */ + struct pt_regs *uregs; + + unsigned long trap_no, error_code; + unsigned long address; + /* Hardware debugging registers may come here */ + + /* floating point info */ + union sh_fpu_union fpu; +}; + +#define INIT_MMAP \ +{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL } + +extern struct pt_regs fake_swapper_regs; + +#define INIT_THREAD { \ + .sp = sizeof(init_stack) + \ + (long) &init_stack, \ + .pc = 0, \ + .kregs = &fake_swapper_regs, \ + .uregs = NULL, \ + .trap_no = 0, \ + .error_code = 0, \ + .address = 0, \ + .fpu = { { { 0, } }, } \ +} + +/* + * Do necessary setup to start up a newly executed thread. + */ +#define SR_USER (SR_MMU | SR_FD) + +#define start_thread(regs, new_pc, new_sp) \ + set_fs(USER_DS); \ + regs->sr = SR_USER; /* User mode. */ \ + regs->pc = new_pc - 4; /* Compensate syscall exit */ \ + regs->pc |= 1; /* Set SHmedia ! */ \ + regs->regs[18] = 0; \ + regs->regs[15] = new_sp + +/* Forward declaration, a strange C thing */ +struct task_struct; +struct mm_struct; + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); +/* + * create a kernel thread without removing it from tasklists + */ +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + + +/* Copy and release all segment info associated with a VM */ +#define copy_segments(p, mm) do { } while (0) +#define release_segments(mm) do { } while (0) +#define forget_segments() do { } while (0) +#define prepare_to_copy(tsk) do { } while (0) +/* + * FPU lazy state save handling. + */ + +static inline void disable_fpu(void) +{ + unsigned long long __dummy; + + /* Set FD flag in SR */ + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "or %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy) + : "r" (SR_FD)); +} + +static inline void enable_fpu(void) +{ + unsigned long long __dummy; + + /* Clear out FD flag in SR */ + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy) + : "r" (~SR_FD)); +} + +/* Round to nearest, no exceptions on inexact, overflow, underflow, + zero-divide, invalid. Configure option for whether to flush denorms to + zero, or except if a denorm is encountered. */ +#if defined(CONFIG_SH64_FPU_DENORM_FLUSH) +#define FPSCR_INIT 0x00040000 +#else +#define FPSCR_INIT 0x00000000 +#endif + +#ifdef CONFIG_SH_FPU +/* Initialise the FP state of a task */ +void fpinit(struct sh_fpu_hard_struct *fpregs); +#else +#define fpinit(fpregs) do { } while (0) +#endif + +extern struct task_struct *last_task_used_math; + +/* + * Return saved PC of a blocked thread. + */ +#define thread_saved_pc(tsk) (tsk->thread.pc) + +extern unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) ((tsk)->thread.pc) +#define KSTK_ESP(tsk) ((tsk)->thread.sp) + +#define cpu_relax() barrier() + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_PROCESSOR_64_H */ diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h new file mode 100644 index 000000000000..643ab5a7cf3b --- /dev/null +++ b/arch/sh/include/asm/ptrace.h @@ -0,0 +1,130 @@ +#ifndef __ASM_SH_PTRACE_H +#define __ASM_SH_PTRACE_H + +/* + * Copyright (C) 1999, 2000 Niibe Yutaka + * + */ +#if defined(__SH5__) +struct pt_regs { + unsigned long long pc; + unsigned long long sr; + unsigned long long syscall_nr; + unsigned long long regs[63]; + unsigned long long tregs[8]; + unsigned long long pad[2]; +}; +#else +/* + * GCC defines register number like this: + * ----------------------------- + * 0 - 15 are integer registers + * 17 - 22 are control/special registers + * 24 - 39 fp registers + * 40 - 47 xd registers + * 48 - fpscr register + * ----------------------------- + * + * We follows above, except: + * 16 --- program counter (PC) + * 22 --- syscall # + * 23 --- floating point communication register + */ +#define REG_REG0 0 +#define REG_REG15 15 + +#define REG_PC 16 + +#define REG_PR 17 +#define REG_SR 18 +#define REG_GBR 19 +#define REG_MACH 20 +#define REG_MACL 21 + +#define REG_SYSCALL 22 + +#define REG_FPREG0 23 +#define REG_FPREG15 38 +#define REG_XFREG0 39 +#define REG_XFREG15 54 + +#define REG_FPSCR 55 +#define REG_FPUL 56 + +/* + * This struct defines the way the registers are stored on the + * kernel stack during a system call or other kernel entry. + */ +struct pt_regs { + unsigned long regs[16]; + unsigned long pc; + unsigned long pr; + unsigned long sr; + unsigned long gbr; + unsigned long mach; + unsigned long macl; + long tra; +}; + +/* + * This struct defines the way the DSP registers are stored on the + * kernel stack during a system call or other kernel entry. + */ +struct pt_dspregs { + unsigned long a1; + unsigned long a0g; + unsigned long a1g; + unsigned long m0; + unsigned long m1; + unsigned long a0; + unsigned long x0; + unsigned long x1; + unsigned long y0; + unsigned long y1; + unsigned long dsr; + unsigned long rs; + unsigned long re; + unsigned long mod; +}; + +#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ + +#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ +#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ + +#define PTRACE_GETDSPREGS 55 +#define PTRACE_SETDSPREGS 56 +#endif + +#ifdef __KERNEL__ +#include + +#define user_mode(regs) (((regs)->sr & 0x40000000)==0) +#define instruction_pointer(regs) ((unsigned long)(regs)->pc) + +extern void show_regs(struct pt_regs *); + +#ifdef CONFIG_SH_DSP +#define task_pt_regs(task) \ + ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ + - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1) +#else +#define task_pt_regs(task) \ + ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ + - sizeof(unsigned long)) - 1) +#endif + +static inline unsigned long profile_pc(struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + +#ifdef P2SEG + if (pc >= P2SEG && pc < P3SEG) + pc -= 0x20000000; +#endif + + return pc; +} +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_PTRACE_H */ diff --git a/arch/sh/include/asm/push-switch.h b/arch/sh/include/asm/push-switch.h new file mode 100644 index 000000000000..4903f9e52dd8 --- /dev/null +++ b/arch/sh/include/asm/push-switch.h @@ -0,0 +1,31 @@ +#ifndef __ASM_SH_PUSH_SWITCH_H +#define __ASM_SH_PUSH_SWITCH_H + +#include +#include +#include +#include + +struct push_switch { + /* switch state */ + unsigned int state:1; + /* debounce timer */ + struct timer_list debounce; + /* workqueue */ + struct work_struct work; + /* platform device, for workqueue handler */ + struct platform_device *pdev; +}; + +struct push_switch_platform_info { + /* IRQ handler */ + irqreturn_t (*irq_handler)(int irq, void *data); + /* Special IRQ flags */ + unsigned int irq_flags; + /* Bit location of switch */ + unsigned int bit; + /* Symbolic switch name */ + const char *name; +}; + +#endif /* __ASM_SH_PUSH_SWITCH_H */ diff --git a/arch/sh/include/asm/r7780rp.h b/arch/sh/include/asm/r7780rp.h new file mode 100644 index 000000000000..306f7359f7d4 --- /dev/null +++ b/arch/sh/include/asm/r7780rp.h @@ -0,0 +1,198 @@ +#ifndef __ASM_SH_RENESAS_R7780RP_H +#define __ASM_SH_RENESAS_R7780RP_H + +/* Box specific addresses. */ +#if defined(CONFIG_SH_R7780MP) +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_SDPOW (-1) + +#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ +#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ +#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */ +#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */ +#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */ +#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */ +#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */ +#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */ +#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */ +#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */ +#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */ +#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */ +#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */ +#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */ +#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ +#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ +#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ +#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ +#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ +#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */ +#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ +#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ +#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ +#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */ +#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */ +#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */ +#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */ +#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */ +#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */ +#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */ +#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */ +#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */ +#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */ +#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */ +#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */ +#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */ +#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */ +#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */ +#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */ +#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */ +#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */ +#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */ +#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */ +#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */ +#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */ +#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */ +#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */ +#define PA_SMCR (PA_BCR+0x0600) /* 2-wire Serial control */ +#define PA_SMSMADR (PA_BCR+0x0602) /* 2-wire Serial Slave control */ +#define PA_SMMR (PA_BCR+0x0604) /* 2-wire Serial Mode control */ +#define PA_SMSADR1 (PA_BCR+0x0606) /* 2-wire Serial Address1 control */ +#define PA_SMTRDR1 (PA_BCR+0x0646) /* 2-wire Serial Data1 control */ +#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */ +#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */ +#define PA_PMR (PA_BCR+0x0900) /* */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ +#define IVDR_CK_ON 8 /* iVDR Clock ON */ + +#elif defined(CONFIG_SH_R7780RP) +#define PA_POFF (-1) + +#define PA_BCR 0xa5000000 /* FPGA */ +#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ +#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ +#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */ +#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */ +#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */ +#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */ +#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */ +#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */ +#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */ +#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */ +#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */ +#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */ +#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */ +#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */ +#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ +#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ +#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ +#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ +#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ +#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */ +#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */ +#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */ +#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ +#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ +#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ +#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */ +#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */ +#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */ +#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */ +#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */ +#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */ +#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */ +#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */ +#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */ +#define PA_SMCR (PA_BCR+0x0500) /* 2-wire Serial control */ +#define PA_SMSMADR (PA_BCR+0x0502) /* 2-wire Serial Slave control */ +#define PA_SMMR (PA_BCR+0x0504) /* 2-wire Serial Mode control */ +#define PA_SMSADR1 (PA_BCR+0x0506) /* 2-wire Serial Address1 control */ +#define PA_SMTRDR1 (PA_BCR+0x0546) /* 2-wire Serial Data1 control */ +#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */ + +#define PA_AX88796L 0xa5800400 /* AX88796L Area */ +#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */ +#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ +#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ + +#define IVDR_CK_ON 8 /* iVDR Clock ON */ + +#elif defined(CONFIG_SH_R7785RP) +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_SDPOW (-1) + +#define PA_PCISCR (PA_BCR+0x0000) +#define PA_IRLPRA (PA_BCR+0x0002) +#define PA_IRLPRB (PA_BCR+0x0004) +#define PA_IRLPRC (PA_BCR+0x0006) +#define PA_IRLPRD (PA_BCR+0x0008) +#define IRLCNTR1 (PA_BCR+0x0010) +#define PA_IRLPRE (PA_BCR+0x000a) +#define PA_IRLPRF (PA_BCR+0x000c) +#define PA_EXIRLCR (PA_BCR+0x000e) +#define PA_IRLMCR1 (PA_BCR+0x0010) +#define PA_IRLMCR2 (PA_BCR+0x0012) +#define PA_IRLSSR1 (PA_BCR+0x0014) +#define PA_IRLSSR2 (PA_BCR+0x0016) +#define PA_CFTCR (PA_BCR+0x0100) +#define PA_CFPCR (PA_BCR+0x0102) +#define PA_PCICR (PA_BCR+0x0110) +#define PA_IVDRCTL (PA_BCR+0x0112) +#define PA_IVDRSR (PA_BCR+0x0114) +#define PA_PDRSTCR (PA_BCR+0x0116) +#define PA_POFF (PA_BCR+0x0120) +#define PA_LCDCR (PA_BCR+0x0130) +#define PA_TPCR (PA_BCR+0x0140) +#define PA_TPCKCR (PA_BCR+0x0142) +#define PA_TPRSTR (PA_BCR+0x0144) +#define PA_TPXPDR (PA_BCR+0x0146) +#define PA_TPYPDR (PA_BCR+0x0148) +#define PA_GPIOPFR (PA_BCR+0x0150) +#define PA_GPIODR (PA_BCR+0x0152) +#define PA_OBLED (PA_BCR+0x0154) +#define PA_SWSR (PA_BCR+0x0156) +#define PA_VERREG (PA_BCR+0x0158) +#define PA_SMCR (PA_BCR+0x0200) +#define PA_SMSMADR (PA_BCR+0x0202) +#define PA_SMMR (PA_BCR+0x0204) +#define PA_SMSADR1 (PA_BCR+0x0206) +#define PA_SMSADR32 (PA_BCR+0x0244) +#define PA_SMTRDR1 (PA_BCR+0x0246) +#define PA_SMTRDR16 (PA_BCR+0x0264) +#define PA_CU3MDR (PA_BCR+0x0300) +#define PA_CU5MDR (PA_BCR+0x0302) +#define PA_MMSR (PA_BCR+0x0400) + +#define IVDR_CK_ON 4 /* iVDR Clock ON */ +#endif + +#define HL_FPGA_IRQ_BASE 200 +#define HL_NR_IRL 15 + +#define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0) +#define IRQ_CF (HL_FPGA_IRQ_BASE + 1) +#define IRQ_PSW (HL_FPGA_IRQ_BASE + 2) +#define IRQ_EXT0 (HL_FPGA_IRQ_BASE + 3) +#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 4) +#define IRQ_EXT2 (HL_FPGA_IRQ_BASE + 5) +#define IRQ_EXT3 (HL_FPGA_IRQ_BASE + 6) +#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 7) +#define IRQ_EXT5 (HL_FPGA_IRQ_BASE + 8) +#define IRQ_EXT6 (HL_FPGA_IRQ_BASE + 9) +#define IRQ_EXT7 (HL_FPGA_IRQ_BASE + 10) +#define IRQ_SMBUS (HL_FPGA_IRQ_BASE + 11) +#define IRQ_TP (HL_FPGA_IRQ_BASE + 12) +#define IRQ_RTC (HL_FPGA_IRQ_BASE + 13) +#define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14) +#define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15) +#define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16) + +unsigned char *highlander_plat_irq_setup(void); + +#endif /* __ASM_SH_RENESAS_R7780RP */ diff --git a/arch/sh/include/asm/resource.h b/arch/sh/include/asm/resource.h new file mode 100644 index 000000000000..9c2499a86ec0 --- /dev/null +++ b/arch/sh/include/asm/resource.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_RESOURCE_H +#define __ASM_SH_RESOURCE_H + +#include + +#endif /* __ASM_SH_RESOURCE_H */ diff --git a/arch/sh/include/asm/rtc.h b/arch/sh/include/asm/rtc.h new file mode 100644 index 000000000000..1813f4202a24 --- /dev/null +++ b/arch/sh/include/asm/rtc.h @@ -0,0 +1,16 @@ +#ifndef _ASM_RTC_H +#define _ASM_RTC_H + +extern void (*board_time_init)(void); +extern void (*rtc_sh_get_time)(struct timespec *); +extern int (*rtc_sh_set_time)(const time_t); + +#define RTC_CAP_4_DIGIT_YEAR (1 << 0) + +struct sh_rtc_platform_info { + unsigned long capabilities; +}; + +#include + +#endif /* _ASM_RTC_H */ diff --git a/arch/sh/include/asm/rts7751r2d.h b/arch/sh/include/asm/rts7751r2d.h new file mode 100644 index 000000000000..0a800157b826 --- /dev/null +++ b/arch/sh/include/asm/rts7751r2d.h @@ -0,0 +1,70 @@ +#ifndef __ASM_SH_RENESAS_RTS7751R2D_H +#define __ASM_SH_RENESAS_RTS7751R2D_H + +/* + * linux/include/asm-sh/renesas_rts7751r2d.h + * + * Copyright (C) 2000 Atom Create Engineering Co., Ltd. + * + * Renesas Technology Sales RTS7751R2D support + */ + +/* Board specific addresses. */ + +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_IRLMON 0xa4000002 /* Interrupt Status control */ +#define PA_CFCTL 0xa4000004 /* CF Timing control */ +#define PA_CFPOW 0xa4000006 /* CF Power control */ +#define PA_DISPCTL 0xa4000008 /* Display Timing control */ +#define PA_SDMPOW 0xa400000a /* SD Power control */ +#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */ +#define PA_PCICD 0xa400000e /* PCI Extention detect control */ +#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */ + +#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */ +#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */ +#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */ +#define PA_R2D1_EXTRST 0xa4000028 /* Extention Reset control */ +#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */ + +#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */ +#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */ +#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extention Reset control */ +#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */ +#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */ + +#define PA_POWOFF 0xa4000030 /* Board Power OFF control */ +#define PA_VERREG 0xa4000032 /* FPGA Version Register */ +#define PA_INPORT 0xa4000034 /* KEY Input Port control */ +#define PA_OUTPORT 0xa4000036 /* LED control */ +#define PA_BVERREG 0xa4000038 /* Board Revision Register */ + +#define PA_AX88796L 0xaa000400 /* AX88796L Area */ +#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */ +#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ +#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ + +#define R2D_FPGA_IRQ_BASE 100 + +#define IRQ_VOYAGER (R2D_FPGA_IRQ_BASE + 0) +#define IRQ_EXT (R2D_FPGA_IRQ_BASE + 1) +#define IRQ_TP (R2D_FPGA_IRQ_BASE + 2) +#define IRQ_RTC_T (R2D_FPGA_IRQ_BASE + 3) +#define IRQ_RTC_A (R2D_FPGA_IRQ_BASE + 4) +#define IRQ_SDCARD (R2D_FPGA_IRQ_BASE + 5) +#define IRQ_CF_CD (R2D_FPGA_IRQ_BASE + 6) +#define IRQ_CF_IDE (R2D_FPGA_IRQ_BASE + 7) +#define IRQ_AX88796 (R2D_FPGA_IRQ_BASE + 8) +#define IRQ_KEY (R2D_FPGA_IRQ_BASE + 9) +#define IRQ_PCI_INTA (R2D_FPGA_IRQ_BASE + 10) +#define IRQ_PCI_INTB (R2D_FPGA_IRQ_BASE + 11) +#define IRQ_PCI_INTC (R2D_FPGA_IRQ_BASE + 12) +#define IRQ_PCI_INTD (R2D_FPGA_IRQ_BASE + 13) + +/* arch/sh/boards/renesas/rts7751r2d/irq.c */ +void init_rts7751r2d_IRQ(void); +int rts7751r2d_irq_demux(int); + +#endif /* __ASM_SH_RENESAS_RTS7751R2D */ diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h new file mode 100644 index 000000000000..1987f3ea7f1b --- /dev/null +++ b/arch/sh/include/asm/rwsem.h @@ -0,0 +1,188 @@ +/* + * include/asm-sh/rwsem.h: R/W semaphores for SH using the stuff + * in lib/rwsem.c. + */ + +#ifndef _ASM_SH_RWSEM_H +#define _ASM_SH_RWSEM_H + +#ifndef _LINUX_RWSEM_H +#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead" +#endif + +#ifdef __KERNEL__ +#include +#include +#include +#include + +/* + * the semaphore definition + */ +struct rw_semaphore { + long count; +#define RWSEM_UNLOCKED_VALUE 0x00000000 +#define RWSEM_ACTIVE_BIAS 0x00000001 +#define RWSEM_ACTIVE_MASK 0x0000ffff +#define RWSEM_WAITING_BIAS (-0x00010000) +#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS +#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) + spinlock_t wait_lock; + struct list_head wait_list; +#ifdef CONFIG_DEBUG_LOCK_ALLOC + struct lockdep_map dep_map; +#endif +}; + +#ifdef CONFIG_DEBUG_LOCK_ALLOC +# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } +#else +# define __RWSEM_DEP_MAP_INIT(lockname) +#endif + +#define __RWSEM_INITIALIZER(name) \ + { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ + LIST_HEAD_INIT((name).wait_list) \ + __RWSEM_DEP_MAP_INIT(name) } + +#define DECLARE_RWSEM(name) \ + struct rw_semaphore name = __RWSEM_INITIALIZER(name) + +extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); + +extern void __init_rwsem(struct rw_semaphore *sem, const char *name, + struct lock_class_key *key); + +#define init_rwsem(sem) \ +do { \ + static struct lock_class_key __key; \ + \ + __init_rwsem((sem), #sem, &__key); \ +} while (0) + +static inline void init_rwsem(struct rw_semaphore *sem) +{ + sem->count = RWSEM_UNLOCKED_VALUE; + spin_lock_init(&sem->wait_lock); + INIT_LIST_HEAD(&sem->wait_list); +} + +/* + * lock for reading + */ +static inline void __down_read(struct rw_semaphore *sem) +{ + if (atomic_inc_return((atomic_t *)(&sem->count)) > 0) + smp_wmb(); + else + rwsem_down_read_failed(sem); +} + +static inline int __down_read_trylock(struct rw_semaphore *sem) +{ + int tmp; + + while ((tmp = sem->count) >= 0) { + if (tmp == cmpxchg(&sem->count, tmp, + tmp + RWSEM_ACTIVE_READ_BIAS)) { + smp_wmb(); + return 1; + } + } + return 0; +} + +/* + * lock for writing + */ +static inline void __down_write(struct rw_semaphore *sem) +{ + int tmp; + + tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS, + (atomic_t *)(&sem->count)); + if (tmp == RWSEM_ACTIVE_WRITE_BIAS) + smp_wmb(); + else + rwsem_down_write_failed(sem); +} + +static inline int __down_write_trylock(struct rw_semaphore *sem) +{ + int tmp; + + tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE, + RWSEM_ACTIVE_WRITE_BIAS); + smp_wmb(); + return tmp == RWSEM_UNLOCKED_VALUE; +} + +/* + * unlock after reading + */ +static inline void __up_read(struct rw_semaphore *sem) +{ + int tmp; + + smp_wmb(); + tmp = atomic_dec_return((atomic_t *)(&sem->count)); + if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0) + rwsem_wake(sem); +} + +/* + * unlock after writing + */ +static inline void __up_write(struct rw_semaphore *sem) +{ + smp_wmb(); + if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS, + (atomic_t *)(&sem->count)) < 0) + rwsem_wake(sem); +} + +/* + * implement atomic add functionality + */ +static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) +{ + atomic_add(delta, (atomic_t *)(&sem->count)); +} + +/* + * downgrade write lock to read lock + */ +static inline void __downgrade_write(struct rw_semaphore *sem) +{ + int tmp; + + smp_wmb(); + tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count)); + if (tmp < 0) + rwsem_downgrade_wake(sem); +} + +static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) +{ + __down_write(sem); +} + +/* + * implement exchange and add functionality + */ +static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) +{ + smp_mb(); + return atomic_add_return(delta, (atomic_t *)(&sem->count)); +} + +static inline int rwsem_is_locked(struct rw_semaphore *sem) +{ + return (sem->count != 0); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_SH_RWSEM_H */ diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h new file mode 100644 index 000000000000..2084d0373693 --- /dev/null +++ b/arch/sh/include/asm/scatterlist.h @@ -0,0 +1,27 @@ +#ifndef __ASM_SH_SCATTERLIST_H +#define __ASM_SH_SCATTERLIST_H + +#include + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset;/* for highmem, page offset */ + dma_addr_t dma_address; + unsigned int length; +}; + +#define ISA_DMA_THRESHOLD PHYS_ADDR_MASK + +/* These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#endif /* !(__ASM_SH_SCATTERLIST_H) */ diff --git a/arch/sh/include/asm/sdk7780.h b/arch/sh/include/asm/sdk7780.h new file mode 100644 index 000000000000..697dc865f21b --- /dev/null +++ b/arch/sh/include/asm/sdk7780.h @@ -0,0 +1,81 @@ +#ifndef __ASM_SH_RENESAS_SDK7780_H +#define __ASM_SH_RENESAS_SDK7780_H + +/* + * linux/include/asm-sh/sdk7780.h + * + * Renesas Solutions SH7780 SDK Support + * Copyright (C) 2008 Nicholas Beck + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0xa0800000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x00400000 /* Flash-ROM size 4M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */ +#define PA_SDRAM_SIZE 0x08000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 +#define PA_EXT_USER PA_EXT4 /* User Expansion Space */ + +#define PA_PERIPHERAL PA_AREA5_IO + +/* SRAM/Reserved */ +#define PA_RESERVED (PA_PERIPHERAL + 0) +/* FPGA base address */ +#define PA_FPGA (PA_PERIPHERAL + 0x01000000) +/* SMC LAN91C111 */ +#define PA_LAN (PA_PERIPHERAL + 0x01800000) + + +#define FPGA_SRSTR (PA_FPGA + 0x000) /* System reset */ +#define FPGA_IRQ0SR (PA_FPGA + 0x010) /* IRQ0 status */ +#define FPGA_IRQ0MR (PA_FPGA + 0x020) /* IRQ0 mask */ +#define FPGA_BDMR (PA_FPGA + 0x030) /* Board operating mode */ +#define FPGA_INTT0PRTR (PA_FPGA + 0x040) /* Interrupt test mode0 port */ +#define FPGA_INTT0SELR (PA_FPGA + 0x050) /* Int. test mode0 select */ +#define FPGA_INTT1POLR (PA_FPGA + 0x060) /* Int. test mode0 polarity */ +#define FPGA_NMIR (PA_FPGA + 0x070) /* NMI source */ +#define FPGA_NMIMR (PA_FPGA + 0x080) /* NMI mask */ +#define FPGA_IRQR (PA_FPGA + 0x090) /* IRQX source */ +#define FPGA_IRQMR (PA_FPGA + 0x0A0) /* IRQX mask */ +#define FPGA_SLEDR (PA_FPGA + 0x0B0) /* LED control */ +#define PA_LED FPGA_SLEDR +#define FPGA_MAPSWR (PA_FPGA + 0x0C0) /* Map switch */ +#define FPGA_FPVERR (PA_FPGA + 0x0D0) /* FPGA version */ +#define FPGA_FPDATER (PA_FPGA + 0x0E0) /* FPGA date */ +#define FPGA_RSE (PA_FPGA + 0x100) /* Reset source */ +#define FPGA_EASR (PA_FPGA + 0x110) /* External area select */ +#define FPGA_SPER (PA_FPGA + 0x120) /* Serial port enable */ +#define FPGA_IMSR (PA_FPGA + 0x130) /* Interrupt mode select */ +#define FPGA_PCIMR (PA_FPGA + 0x140) /* PCI Mode */ +#define FPGA_DIPSWMR (PA_FPGA + 0x150) /* DIPSW monitor */ +#define FPGA_FPODR (PA_FPGA + 0x160) /* Output port data */ +#define FPGA_ATAESR (PA_FPGA + 0x170) /* ATA extended bus status */ +#define FPGA_IRQPOLR (PA_FPGA + 0x180) /* IRQx polarity */ + + +#define SDK7780_NR_IRL 15 +/* IDE/ATA interrupt */ +#define IRQ_CFCARD 14 +/* SMC interrupt */ +#define IRQ_ETHERNET 6 + + +/* arch/sh/boards/renesas/sdk7780/irq.c */ +void init_sdk7780_IRQ(void); + +#define __IO_PREFIX sdk7780 +#include + +#endif /* __ASM_SH_RENESAS_SDK7780_H */ diff --git a/arch/sh/include/asm/se.h b/arch/sh/include/asm/se.h new file mode 100644 index 000000000000..eb23000e1bbe --- /dev/null +++ b/arch/sh/include/asm/se.h @@ -0,0 +1,99 @@ +#ifndef __ASM_SH_HITACHI_SE_H +#define __ASM_SH_HITACHI_SE_H + +/* + * linux/include/asm-sh/hitachi_se.h + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine support + */ + +/* Box specific addresses. */ + +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0x01000000 /* EPROM */ +#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0x12000000 +#define PA_EXT4_SIZE 0x02000000 +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ + +#define PA_83902 0xb0000000 /* DP83902A */ +#define PA_83902_IF 0xb0040000 /* DP83902A remote io port */ +#define PA_83902_RST 0xb0080000 /* DP83902A reset port */ + +#define PA_SUPERIO 0xb0400000 /* SMC37C935A super io chip */ +#define PA_DIPSW0 0xb0800000 /* Dip switch 5,6 */ +#define PA_DIPSW1 0xb0800002 /* Dip switch 7,8 */ +#define PA_LED 0xb0c00000 /* LED */ +#if defined(CONFIG_CPU_SUBTYPE_SH7705) +#define PA_BCR 0xb0e00000 +#else +#define PA_BCR 0xb1400000 /* FPGA */ +#endif + +#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define BCR_ILCRA (PA_BCR + 0) +#define BCR_ILCRB (PA_BCR + 2) +#define BCR_ILCRC (PA_BCR + 4) +#define BCR_ILCRD (PA_BCR + 6) +#define BCR_ILCRE (PA_BCR + 8) +#define BCR_ILCRF (PA_BCR + 10) +#define BCR_ILCRG (PA_BCR + 12) + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) +#define IRQ_STNIC 12 +#define IRQ_CFCARD 14 +#else +#define IRQ_STNIC 10 +#define IRQ_CFCARD 7 +#endif + +/* SH Ether support (SH7710/SH7712) */ +/* Base address */ +#define SH_ETH0_BASE 0xA7000000 +#define SH_ETH1_BASE 0xA7000400 +/* PHY ID */ +#if defined(CONFIG_CPU_SUBTYPE_SH7710) +# define PHY_ID 0x00 +#elif defined(CONFIG_CPU_SUBTYPE_SH7712) +# define PHY_ID 0x01 +#endif +/* Ether IRQ */ +#define SH_ETH0_IRQ 80 +#define SH_ETH1_IRQ 81 +#define SH_TSU_IRQ 82 + +void init_se_IRQ(void); + +#define __IO_PREFIX se +#include + +#endif /* __ASM_SH_HITACHI_SE_H */ diff --git a/arch/sh/include/asm/se7206.h b/arch/sh/include/asm/se7206.h new file mode 100644 index 000000000000..698eb80389ab --- /dev/null +++ b/arch/sh/include/asm/se7206.h @@ -0,0 +1,13 @@ +#ifndef __ASM_SH_SE7206_H +#define __ASM_SH_SE7206_H + +#define PA_SMSC 0x30000000 +#define PA_MRSHPC 0x34000000 +#define PA_LED 0x31400000 + +void init_se7206_IRQ(void); + +#define __IO_PREFIX se7206 +#include + +#endif /* __ASM_SH_SE7206_H */ diff --git a/arch/sh/include/asm/se7343.h b/arch/sh/include/asm/se7343.h new file mode 100644 index 000000000000..98458460e632 --- /dev/null +++ b/arch/sh/include/asm/se7343.h @@ -0,0 +1,149 @@ +#ifndef __ASM_SH_HITACHI_SE7343_H +#define __ASM_SH_HITACHI_SE7343_H + +/* + * include/asm-sh/se/se7343.h + * + * Copyright (C) 2003 Takashi Kusuda + * + * SH-Mobile SolutionEngine 7343 support + */ + +/* Box specific addresses. */ + +/* Area 0 */ +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */ +#define PA_FROM 0x00400000 /* Flash ROM */ +#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */ +#define PA_SRAM 0x00800000 /* SRAM */ +#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */ +/* Area 1 */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +/* Area 2 */ +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +/* Area 3 */ +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 +/* Area 4 */ +#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */ +#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) +#define PA_LED 0xb0C00000 /* LED */ +#define LED_SHIFT 0 +#define PA_DIPSW 0xb0900000 /* Dip switch 31 */ +#define PA_CPLD_MODESET 0xb1400004 /* CPLD Mode set register */ +#define PA_CPLD_ST 0xb1400008 /* CPLD Interrupt status register */ +#define PA_CPLD_IMSK 0xb140000a /* CPLD Interrupt mask register */ +/* Area 5 */ +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +/* Area 6 */ +#define PA_LCD1 0xb8000000 +#define PA_LCD2 0xb8800000 + +#define PORT_PACR 0xA4050100 +#define PORT_PBCR 0xA4050102 +#define PORT_PCCR 0xA4050104 +#define PORT_PDCR 0xA4050106 +#define PORT_PECR 0xA4050108 +#define PORT_PFCR 0xA405010A +#define PORT_PGCR 0xA405010C +#define PORT_PHCR 0xA405010E +#define PORT_PJCR 0xA4050110 +#define PORT_PKCR 0xA4050112 +#define PORT_PLCR 0xA4050114 +#define PORT_PMCR 0xA4050116 +#define PORT_PNCR 0xA4050118 +#define PORT_PQCR 0xA405011A +#define PORT_PRCR 0xA405011C +#define PORT_PSCR 0xA405011E +#define PORT_PTCR 0xA4050140 +#define PORT_PUCR 0xA4050142 +#define PORT_PVCR 0xA4050144 +#define PORT_PWCR 0xA4050146 +#define PORT_PYCR 0xA4050148 +#define PORT_PZCR 0xA405014A + +#define PORT_PSELA 0xA405014C +#define PORT_PSELB 0xA405014E +#define PORT_PSELC 0xA4050150 +#define PORT_PSELD 0xA4050152 +#define PORT_PSELE 0xA4050154 + +#define PORT_HIZCRA 0xA4050156 +#define PORT_HIZCRB 0xA4050158 +#define PORT_HIZCRC 0xA405015C + +#define PORT_DRVCR 0xA4050180 + +#define PORT_PADR 0xA4050120 +#define PORT_PBDR 0xA4050122 +#define PORT_PCDR 0xA4050124 +#define PORT_PDDR 0xA4050126 +#define PORT_PEDR 0xA4050128 +#define PORT_PFDR 0xA405012A +#define PORT_PGDR 0xA405012C +#define PORT_PHDR 0xA405012E +#define PORT_PJDR 0xA4050130 +#define PORT_PKDR 0xA4050132 +#define PORT_PLDR 0xA4050134 +#define PORT_PMDR 0xA4050136 +#define PORT_PNDR 0xA4050138 +#define PORT_PQDR 0xA405013A +#define PORT_PRDR 0xA405013C +#define PORT_PTDR 0xA4050160 +#define PORT_PUDR 0xA4050162 +#define PORT_PVDR 0xA4050164 +#define PORT_PWDR 0xA4050166 +#define PORT_PYDR 0xA4050168 + +#define FPGA_IN 0xb1400000 +#define FPGA_OUT 0xb1400002 + +#define __IO_PREFIX sh7343se +#include + +#define IRQ0_IRQ 32 +#define IRQ1_IRQ 33 +#define IRQ4_IRQ 36 +#define IRQ5_IRQ 37 + +#define SE7343_FPGA_IRQ_MRSHPC0 0 +#define SE7343_FPGA_IRQ_MRSHPC1 1 +#define SE7343_FPGA_IRQ_MRSHPC2 2 +#define SE7343_FPGA_IRQ_MRSHPC3 3 +#define SE7343_FPGA_IRQ_SMC 6 /* EXT_IRQ2 */ +#define SE7343_FPGA_IRQ_USB 8 + +#define SE7343_FPGA_IRQ_NR 11 +#define SE7343_FPGA_IRQ_BASE 120 + +#define MRSHPC_IRQ3 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3) +#define MRSHPC_IRQ2 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2) +#define MRSHPC_IRQ1 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1) +#define MRSHPC_IRQ0 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0) +#define SMC_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC) +#define USB_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB) + +/* arch/sh/boards/se/7343/irq.c */ +void init_7343se_IRQ(void); + +#endif /* __ASM_SH_HITACHI_SE7343_H */ diff --git a/arch/sh/include/asm/se7721.h b/arch/sh/include/asm/se7721.h new file mode 100644 index 000000000000..b957f6041193 --- /dev/null +++ b/arch/sh/include/asm/se7721.h @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2008 Renesas Solutions Corp. + * + * Hitachi UL SolutionEngine 7721 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#ifndef __ASM_SH_SE7721_H +#define __ASM_SH_SE7721_H +#include + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 2 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */ +#define PA_FROM 0xa1000000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SDRAM 0xaC000000 /* SDRAM(Area3) 64MB */ +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 + +#define PA_PERIPHERAL 0xB8000000 + +#define PA_PCIC PA_PERIPHERAL +#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) +#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) +#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) +#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define PA_LED 0xB6800000 /* 8bit LED */ +#define PA_FPGA 0xB7000000 /* FPGA base address */ + +#define MRSHPC_IRQ0 10 + +#define FPGA_ILSR1 (PA_FPGA + 0x02) +#define FPGA_ILSR2 (PA_FPGA + 0x03) +#define FPGA_ILSR3 (PA_FPGA + 0x04) +#define FPGA_ILSR4 (PA_FPGA + 0x05) +#define FPGA_ILSR5 (PA_FPGA + 0x06) +#define FPGA_ILSR6 (PA_FPGA + 0x07) +#define FPGA_ILSR7 (PA_FPGA + 0x08) +#define FPGA_ILSR8 (PA_FPGA + 0x09) + +void init_se7721_IRQ(void); + +#define __IO_PREFIX se7721 +#include + +#endif /* __ASM_SH_SE7721_H */ diff --git a/arch/sh/include/asm/se7722.h b/arch/sh/include/asm/se7722.h new file mode 100644 index 000000000000..e971d9a82f4a --- /dev/null +++ b/arch/sh/include/asm/se7722.h @@ -0,0 +1,112 @@ +#ifndef __ASM_SH_SE7722_H +#define __ASM_SH_SE7722_H + +/* + * linux/include/asm-sh/se7722.h + * + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * Hitachi UL SolutionEngine 7722 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */ +#define PA_FROM 0xa1000000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SDRAM 0xaC000000 /* DDR-SDRAM(Area3) 64MB */ +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 + +#define PA_PERIPHERAL 0xB0000000 + +#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */ +#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) /* MR-SHPC-01 I/O window base */ +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define PA_LED (PA_PERIPHERAL + 0x00800000) /* 8bit LED */ +#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */ + +#define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */ +/* GPIO */ +#define FPGA_IN 0xb1840000UL +#define FPGA_OUT 0xb1840004UL + +#define PORT_PECR 0xA4050108UL +#define PORT_PJCR 0xA4050110UL +#define PORT_PSELD 0xA4050154UL +#define PORT_PSELB 0xA4050150UL + +#define PORT_PSELC 0xA4050152UL +#define PORT_PKCR 0xA4050112UL +#define PORT_PHCR 0xA405010EUL +#define PORT_PLCR 0xA4050114UL +#define PORT_PMCR 0xA4050116UL +#define PORT_PRCR 0xA405011CUL +#define PORT_PXCR 0xA4050148UL +#define PORT_PSELA 0xA405014EUL +#define PORT_PYCR 0xA405014AUL +#define PORT_PZCR 0xA405014CUL +#define PORT_HIZCRA 0xA4050158UL +#define PORT_HIZCRC 0xA405015CUL + +/* IRQ */ +#define IRQ0_IRQ 32 +#define IRQ1_IRQ 33 + +#define IRQ01_MODE 0xb1800000 +#define IRQ01_STS 0xb1800004 +#define IRQ01_MASK 0xb1800008 + +/* Bits in IRQ01_* registers */ + +#define SE7722_FPGA_IRQ_USB 0 /* IRQ0 */ +#define SE7722_FPGA_IRQ_SMC 1 /* IRQ0 */ +#define SE7722_FPGA_IRQ_MRSHPC0 2 /* IRQ1 */ +#define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */ +#define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */ +#define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */ + +#define SE7722_FPGA_IRQ_NR 6 +#define SE7722_FPGA_IRQ_BASE 110 + +#define MRSHPC_IRQ3 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3) +#define MRSHPC_IRQ2 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2) +#define MRSHPC_IRQ1 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1) +#define MRSHPC_IRQ0 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0) +#define SMC_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC) +#define USB_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB) + +/* arch/sh/boards/se/7722/irq.c */ +void init_se7722_IRQ(void); + +#define __IO_PREFIX se7722 +#include + +#endif /* __ASM_SH_SE7722_H */ diff --git a/arch/sh/include/asm/se7751.h b/arch/sh/include/asm/se7751.h new file mode 100644 index 000000000000..b36792ac5d66 --- /dev/null +++ b/arch/sh/include/asm/se7751.h @@ -0,0 +1,73 @@ +#ifndef __ASM_SH_HITACHI_7751SE_H +#define __ASM_SH_HITACHI_7751SE_H + +/* + * linux/include/asm-sh/hitachi_7751se.h + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine support + + * Modified for 7751 Solution Engine by + * Ian da Silva and Jeremy Siegel, 2001. + */ + +/* Box specific addresses. */ + +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0x01000000 /* EPROM */ +#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0x12000000 +#define PA_EXT4_SIZE 0x02000000 +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ + +#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */ +#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */ +#define PA_LED 0xba000000 /* LED */ +#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ + +#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_MODE (PA_MRSHPC + 4) +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define BCR_ILCRA (PA_BCR + 0) +#define BCR_ILCRB (PA_BCR + 2) +#define BCR_ILCRC (PA_BCR + 4) +#define BCR_ILCRD (PA_BCR + 6) +#define BCR_ILCRE (PA_BCR + 8) +#define BCR_ILCRF (PA_BCR + 10) +#define BCR_ILCRG (PA_BCR + 12) + +#define IRQ_79C973 13 + +void init_7751se_IRQ(void); + +#define __IO_PREFIX sh7751se +#include + +#endif /* __ASM_SH_HITACHI_7751SE_H */ diff --git a/arch/sh/include/asm/se7780.h b/arch/sh/include/asm/se7780.h new file mode 100644 index 000000000000..40e9b41458cd --- /dev/null +++ b/arch/sh/include/asm/se7780.h @@ -0,0 +1,108 @@ +#ifndef __ASM_SH_SE7780_H +#define __ASM_SH_SE7780_H + +/* + * linux/include/asm-sh/se7780.h + * + * Copyright (C) 2006,2007 Nobuhiro Iwamatsu + * + * Hitachi UL SolutionEngine 7780 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0xa1000000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SM501 PA_EXT1 /* Graphic IC (SM501) */ +#define PA_SM501_SIZE PA_EXT1_SIZE /* Graphic IC (SM501) */ +#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */ +#define PA_SDRAM_SIZE 0x08000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 +#define PA_EXT_FLASH PA_EXT4 /* Expansion Flash-ROM */ + +#define PA_PERIPHERAL PA_AREA6_IO /* SW6-6=ON */ + +#define PA_LAN (PA_PERIPHERAL + 0) /* SMC LAN91C111 */ +#define PA_LED_DISP (PA_PERIPHERAL + 0x02000000) /* 8words LED Display */ +#define DISP_CHAR_RAM (7 << 3) +#define DISP_SEL0_ADDR (DISP_CHAR_RAM + 0) +#define DISP_SEL1_ADDR (DISP_CHAR_RAM + 1) +#define DISP_SEL2_ADDR (DISP_CHAR_RAM + 2) +#define DISP_SEL3_ADDR (DISP_CHAR_RAM + 3) +#define DISP_SEL4_ADDR (DISP_CHAR_RAM + 4) +#define DISP_SEL5_ADDR (DISP_CHAR_RAM + 5) +#define DISP_SEL6_ADDR (DISP_CHAR_RAM + 6) +#define DISP_SEL7_ADDR (DISP_CHAR_RAM + 7) + +#define DISP_UDC_RAM (5 << 3) +#define PA_FPGA (PA_PERIPHERAL + 0x03000000) /* FPGA base address */ + +/* FPGA register address and bit */ +#define FPGA_SFTRST (PA_FPGA + 0) /* Soft reset register */ +#define FPGA_INTMSK1 (PA_FPGA + 2) /* Interrupt Mask register 1 */ +#define FPGA_INTMSK2 (PA_FPGA + 4) /* Interrupt Mask register 2 */ +#define FPGA_INTSEL1 (PA_FPGA + 6) /* Interrupt select register 1 */ +#define FPGA_INTSEL2 (PA_FPGA + 8) /* Interrupt select register 2 */ +#define FPGA_INTSEL3 (PA_FPGA + 10) /* Interrupt select register 3 */ +#define FPGA_PCI_INTSEL1 (PA_FPGA + 12) /* PCI Interrupt select register 1 */ +#define FPGA_PCI_INTSEL2 (PA_FPGA + 14) /* PCI Interrupt select register 2 */ +#define FPGA_INTSET (PA_FPGA + 16) /* IRQ/IRL select register */ +#define FPGA_INTSTS1 (PA_FPGA + 18) /* Interrupt status register 1 */ +#define FPGA_INTSTS2 (PA_FPGA + 20) /* Interrupt status register 2 */ +#define FPGA_REQSEL (PA_FPGA + 22) /* REQ/GNT select register */ +#define FPGA_DBG_LED (PA_FPGA + 32) /* Debug LED(D-LED[8:1] */ +#define PA_LED FPGA_DBG_LED +#define FPGA_IVDRID (PA_FPGA + 36) /* iVDR ID Register */ +#define FPGA_IVDRPW (PA_FPGA + 38) /* iVDR Power ON Register */ +#define FPGA_MMCID (PA_FPGA + 40) /* MMC ID Register */ + +/* FPGA INTSEL position */ +/* INTSEL1 */ +#define IRQPOS_SMC91CX (0 * 4) +#define IRQPOS_SM501 (1 * 4) +/* INTSEL2 */ +#define IRQPOS_EXTINT1 (0 * 4) +#define IRQPOS_EXTINT2 (1 * 4) +#define IRQPOS_EXTINT3 (2 * 4) +#define IRQPOS_EXTINT4 (3 * 4) +/* INTSEL3 */ +#define IRQPOS_PCCPW (0 * 4) + +/* IDE interrupt */ +#define IRQ_IDE0 67 /* iVDR */ + +/* SMC interrupt */ +#define SMC_IRQ 8 + +/* SM501 interrupt */ +#define SM501_IRQ 0 + +/* interrupt pin */ +#define IRQPIN_EXTINT1 0 /* IRQ0 pin */ +#define IRQPIN_EXTINT2 1 /* IRQ1 pin */ +#define IRQPIN_EXTINT3 2 /* IRQ2 pin */ +#define IRQPIN_SMC91CX 3 /* IRQ3 pin */ +#define IRQPIN_EXTINT4 4 /* IRQ4 pin */ +#define IRQPIN_PCC0 5 /* IRQ5 pin */ +#define IRQPIN_PCC2 6 /* IRQ6 pin */ +#define IRQPIN_SM501 7 /* IRQ7 pin */ +#define IRQPIN_PCCPW 7 /* IRQ7 pin */ + +/* arch/sh/boards/se/7780/irq.c */ +void init_se7780_IRQ(void); + +#define __IO_PREFIX se7780 +#include + +#endif /* __ASM_SH_SE7780_H */ diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h new file mode 100644 index 000000000000..8f8f4ad400df --- /dev/null +++ b/arch/sh/include/asm/sections.h @@ -0,0 +1,11 @@ +#ifndef __ASM_SH_SECTIONS_H +#define __ASM_SH_SECTIONS_H + +#include + +extern long __machvec_start, __machvec_end; +extern char __uncached_start, __uncached_end; +extern char _ebss[]; + +#endif /* __ASM_SH_SECTIONS_H */ + diff --git a/arch/sh/include/asm/segment.h b/arch/sh/include/asm/segment.h new file mode 100644 index 000000000000..5e2725f4ac49 --- /dev/null +++ b/arch/sh/include/asm/segment.h @@ -0,0 +1,34 @@ +#ifndef __ASM_SH_SEGMENT_H +#define __ASM_SH_SEGMENT_H + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + */ +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) +#ifdef CONFIG_MMU +#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) +#else +#define USER_DS KERNEL_DS +#endif + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#define get_ds() (KERNEL_DS) + +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_SEGMENT_H */ diff --git a/arch/sh/include/asm/sembuf.h b/arch/sh/include/asm/sembuf.h new file mode 100644 index 000000000000..d79f3bd570b2 --- /dev/null +++ b/arch/sh/include/asm/sembuf.h @@ -0,0 +1,25 @@ +#ifndef __ASM_SH_SEMBUF_H +#define __ASM_SH_SEMBUF_H + +/* + * The semid64_ds structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* __ASM_SH_SEMBUF_H */ diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h new file mode 100644 index 000000000000..e13cc948ee60 --- /dev/null +++ b/arch/sh/include/asm/serial.h @@ -0,0 +1,36 @@ +/* + * include/asm-sh/serial.h + * + * Configuration details for 8250, 16450, 16550, etc. serial ports + */ + +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H + +#include + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD ( 1843200 / 16 ) + +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) + +#ifdef CONFIG_HD64465 +#include + +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ + +#else + +#define SERIAL_PORT_DFNS + +#endif + +#endif /* _ASM_SERIAL_H */ diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h new file mode 100644 index 000000000000..55a2bd328d99 --- /dev/null +++ b/arch/sh/include/asm/setup.h @@ -0,0 +1,27 @@ +#ifndef _SH_SETUP_H +#define _SH_SETUP_H + +#define COMMAND_LINE_SIZE 256 + +#ifdef __KERNEL__ + +/* + * This is set up by the setup-routine at boot-time + */ +#define PARAM ((unsigned char *)empty_zero_page) + +#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000)) +#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004)) +#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008)) +#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c)) +#define INITRD_START (*(unsigned long *) (PARAM+0x010)) +#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014)) +/* ... */ +#define COMMAND_LINE ((char *) (PARAM+0x100)) + +int setup_early_printk(char *); +void sh_mv_setup(void); + +#endif /* __KERNEL__ */ + +#endif /* _SH_SETUP_H */ diff --git a/arch/sh/include/asm/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h new file mode 100644 index 000000000000..d3c548443f2a --- /dev/null +++ b/arch/sh/include/asm/sfp-machine.h @@ -0,0 +1,84 @@ +/* Machine-dependent software floating-point definitions. + SuperH kernel version. + Copyright (C) 1997,1998,1999 Free Software Foundation, Inc. + This file is part of the GNU C Library. + Contributed by Richard Henderson (rth@cygnus.com), + Jakub Jelinek (jj@ultra.linux.cz), + David S. Miller (davem@redhat.com) and + Peter Maydell (pmaydell@chiark.greenend.org.uk). + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If + not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef _SFP_MACHINE_H +#define _SFP_MACHINE_H + +#define _FP_W_TYPE_SIZE 32 +#define _FP_W_TYPE unsigned long +#define _FP_WS_TYPE signed long +#define _FP_I_TYPE long + +#define _FP_MUL_MEAT_S(R,X,Y) \ + _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_D(R,X,Y) \ + _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_Q(R,X,Y) \ + _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm) + +#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y) +#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y) +#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y) + +#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1) +#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1 +#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1 +#define _FP_NANSIGN_S 0 +#define _FP_NANSIGN_D 0 +#define _FP_NANSIGN_Q 0 + +#define _FP_KEEPNANFRACP 1 + +/* + * If one NaN is signaling and the other is not, + * we choose that one, otherwise we choose X. + */ +#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \ + do { \ + if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs) \ + && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)) \ + { \ + R##_s = Y##_s; \ + _FP_FRAC_COPY_##wc(R,Y); \ + } \ + else \ + { \ + R##_s = X##_s; \ + _FP_FRAC_COPY_##wc(R,X); \ + } \ + R##_c = FP_CLS_NAN; \ + } while (0) + +//#define FP_ROUNDMODE FPSCR_RM +#define FP_DENORM_ZERO 1/*FPSCR_DN*/ + +/* Exception flags. */ +#define FP_EX_INVALID (1<<4) +#define FP_EX_DIVZERO (1<<3) +#define FP_EX_OVERFLOW (1<<2) +#define FP_EX_UNDERFLOW (1<<1) +#define FP_EX_INEXACT (1<<0) + +#endif + diff --git a/arch/sh/include/asm/sh7760fb.h b/arch/sh/include/asm/sh7760fb.h new file mode 100644 index 000000000000..8767f61aceca --- /dev/null +++ b/arch/sh/include/asm/sh7760fb.h @@ -0,0 +1,197 @@ +/* + * sh7760fb.h -- platform data for SH7760/SH7763 LCDC framebuffer driver. + * + * (c) 2006-2008 MSC Vertriebsges.m.b.H., + * Manuel Lauss + * (c) 2008 Nobuhiro Iwamatsu + */ + +#ifndef _ASM_SH_SH7760FB_H +#define _ASM_SH_SH7760FB_H + +/* + * some bits of the colormap registers should be written as zero. + * create a mask for that. + */ +#define SH7760FB_PALETTE_MASK 0x00f8fcf8 + +/* The LCDC dma engine always sets bits 27-26 to 1: this is Area3 */ +#define SH7760FB_DMA_MASK 0x0C000000 + +/* palette */ +#define LDPR(x) (((x) << 2)) + +/* framebuffer registers and bits */ +#define LDICKR 0x400 +#define LDMTR 0x402 +/* see sh7760fb.h for LDMTR bits */ +#define LDDFR 0x404 +#define LDDFR_PABD (1 << 8) +#define LDDFR_COLOR_MASK 0x7F +#define LDSMR 0x406 +#define LDSMR_ROT (1 << 13) +#define LDSARU 0x408 +#define LDSARL 0x40c +#define LDLAOR 0x410 +#define LDPALCR 0x412 +#define LDPALCR_PALS (1 << 4) +#define LDPALCR_PALEN (1 << 0) +#define LDHCNR 0x414 +#define LDHSYNR 0x416 +#define LDVDLNR 0x418 +#define LDVTLNR 0x41a +#define LDVSYNR 0x41c +#define LDACLNR 0x41e +#define LDINTR 0x420 +#define LDPMMR 0x424 +#define LDPSPR 0x426 +#define LDCNTR 0x428 +#define LDCNTR_DON (1 << 0) +#define LDCNTR_DON2 (1 << 4) + +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +# define LDLIRNR 0x440 +/* LDINTR bit */ +# define LDINTR_MINTEN (1 << 15) +# define LDINTR_FINTEN (1 << 14) +# define LDINTR_VSINTEN (1 << 13) +# define LDINTR_VEINTEN (1 << 12) +# define LDINTR_MINTS (1 << 11) +# define LDINTR_FINTS (1 << 10) +# define LDINTR_VSINTS (1 << 9) +# define LDINTR_VEINTS (1 << 8) +# define VINT_START (LDINTR_VSINTEN) +# define VINT_CHECK (LDINTR_VSINTS) +#else +/* LDINTR bit */ +# define LDINTR_VINTSEL (1 << 12) +# define LDINTR_VINTE (1 << 8) +# define LDINTR_VINTS (1 << 0) +# define VINT_START (LDINTR_VINTSEL) +# define VINT_CHECK (LDINTR_VINTS) +#endif + +/* HSYNC polarity inversion */ +#define LDMTR_FLMPOL (1 << 15) + +/* VSYNC polarity inversion */ +#define LDMTR_CL1POL (1 << 14) + +/* DISPLAY-ENABLE polarity inversion */ +#define LDMTR_DISPEN_LOWACT (1 << 13) + +/* DISPLAY DATA BUS polarity inversion */ +#define LDMTR_DPOL_LOWACT (1 << 12) + +/* AC modulation signal enable */ +#define LDMTR_MCNT (1 << 10) + +/* Disable output of HSYNC during VSYNC period */ +#define LDMTR_CL1CNT (1 << 9) + +/* Disable output of VSYNC during VSYNC period */ +#define LDMTR_CL2CNT (1 << 8) + +/* Display types supported by the LCDC */ +#define LDMTR_STN_MONO_4 0x00 +#define LDMTR_STN_MONO_8 0x01 +#define LDMTR_STN_COLOR_4 0x08 +#define LDMTR_STN_COLOR_8 0x09 +#define LDMTR_STN_COLOR_12 0x0A +#define LDMTR_STN_COLOR_16 0x0B +#define LDMTR_DSTN_MONO_8 0x11 +#define LDMTR_DSTN_MONO_16 0x13 +#define LDMTR_DSTN_COLOR_8 0x19 +#define LDMTR_DSTN_COLOR_12 0x1A +#define LDMTR_DSTN_COLOR_16 0x1B +#define LDMTR_TFT_COLOR_16 0x2B + +/* framebuffer color layout */ +#define LDDFR_1BPP_MONO 0x00 +#define LDDFR_2BPP_MONO 0x01 +#define LDDFR_4BPP_MONO 0x02 +#define LDDFR_6BPP_MONO 0x04 +#define LDDFR_4BPP 0x0A +#define LDDFR_8BPP 0x0C +#define LDDFR_16BPP_RGB555 0x1D +#define LDDFR_16BPP_RGB565 0x2D + +/* LCDC Pixclock sources */ +#define LCDC_CLKSRC_BUSCLOCK 0 +#define LCDC_CLKSRC_PERIPHERAL 1 +#define LCDC_CLKSRC_EXTERNAL 2 + +#define LDICKR_CLKSRC(x) \ + (((x) & 3) << 12) + +/* LCDC pixclock input divider. Set to 1 at a minimum! */ +#define LDICKR_CLKDIV(x) \ + ((x) & 0x1f) + +struct sh7760fb_platdata { + + /* Set this member to a valid fb_videmode for the display you + * wish to use. The following members must be initialized: + * xres, yres, hsync_len, vsync_len, sync, + * {left,right,upper,lower}_margin. + * The driver uses the above members to calculate register values + * and memory requirements. Other members are ignored but may + * be used by other framebuffer layer components. + */ + struct fb_videomode *def_mode; + + /* LDMTR includes display type and signal polarity. The + * HSYNC/VSYNC polarities are derived from the fb_var_screeninfo + * data above; however the polarities of the following signals + * must be encoded in the ldmtr member: + * Display Enable signal (default high-active) DISPEN_LOWACT + * Display Data signals (default high-active) DPOL_LOWACT + * AC Modulation signal (default off) MCNT + * Hsync-During-Vsync suppression (default off) CL1CNT + * Vsync-during-vsync suppression (default off) CL2CNT + * NOTE: also set a display type! + * (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16}) + */ + u16 ldmtr; + + /* LDDFR controls framebuffer image format (depth, organization) + * Use ONE of the LDDFR_?BPP_* macros! + */ + u16 lddfr; + + /* LDPMMR and LDPSPR control the timing of the power signals + * for the display. Please read the SH7760 Hardware Manual, + * Chapters 30.3.17, 30.3.18 and 30.4.6! + */ + u16 ldpmmr; + u16 ldpspr; + + /* LDACLNR contains the line numbers after which the AC modulation + * signal is to toggle. Set to ZERO for TFTs or displays which + * do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual). + */ + u16 ldaclnr; + + /* LDICKR contains information on pixelclock source and config. + * Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros. + * minimal value for CLKDIV() must be 1!. + */ + u16 ldickr; + + /* set this member to 1 if you wish to use the LCDC's hardware + * rotation function. This is limited to displays <= 320x200 + * pixels resolution! + */ + int rotate; /* set to 1 to rotate 90 CCW */ + + /* set this to 1 to suppress vsync irq use. */ + int novsync; + + /* blanking hook for platform. Set this if your platform can do + * more than the LCDC in terms of blanking (e.g. disable clock + * generator / backlight power supply / etc. + */ + void (*blank) (int); +}; + +#endif /* _ASM_SH_SH7760FB_H */ diff --git a/arch/sh/include/asm/sh7763rdp.h b/arch/sh/include/asm/sh7763rdp.h new file mode 100644 index 000000000000..8750cc852977 --- /dev/null +++ b/arch/sh/include/asm/sh7763rdp.h @@ -0,0 +1,54 @@ +#ifndef __ASM_SH_SH7763RDP_H +#define __ASM_SH_SH7763RDP_H + +/* + * linux/include/asm-sh/sh7763drp.h + * + * Copyright (C) 2008 Renesas Solutions + * Copyright (C) 2008 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include + +/* clock control */ +#define MSTPCR1 0xFFC80038 + +/* PORT */ +#define PORT_PSEL0 0xFFEF0070 +#define PORT_PSEL1 0xFFEF0072 +#define PORT_PSEL2 0xFFEF0074 +#define PORT_PSEL3 0xFFEF0076 +#define PORT_PSEL4 0xFFEF0078 + +#define PORT_PACR 0xFFEF0000 +#define PORT_PCCR 0xFFEF0004 +#define PORT_PFCR 0xFFEF000A +#define PORT_PGCR 0xFFEF000C +#define PORT_PHCR 0xFFEF000E +#define PORT_PICR 0xFFEF0010 +#define PORT_PJCR 0xFFEF0012 +#define PORT_PKCR 0xFFEF0014 +#define PORT_PLCR 0xFFEF0016 +#define PORT_PMCR 0xFFEF0018 +#define PORT_PNCR 0xFFEF001A + +/* FPGA */ +#define CPLD_BOARD_ID_ERV_REG 0xB1000000 +#define CPLD_CPLD_CMD_REG 0xB1000006 + +/* + * USB SH7763RDP board can use Host only. + */ +#define USB_USBHSC 0xFFEC80f0 + +/* arch/sh/boards/renesas/sh7763rdp/irq.c */ +void init_sh7763rdp_IRQ(void); +int sh7763rdp_irq_demux(int irq); +#define __IO_PREFIX sh7763rdp +#include + +#endif /* __ASM_SH_SH7763RDP_H */ diff --git a/arch/sh/include/asm/sh7785lcr.h b/arch/sh/include/asm/sh7785lcr.h new file mode 100644 index 000000000000..1ce27d5c7491 --- /dev/null +++ b/arch/sh/include/asm/sh7785lcr.h @@ -0,0 +1,55 @@ +#ifndef __ASM_SH_RENESAS_SH7785LCR_H +#define __ASM_SH_RENESAS_SH7785LCR_H + +/* + * This board has 2 physical memory maps. + * It can be changed with DIP switch(S2-5). + * + * phys address | S2-5 = OFF | S2-5 = ON + * -----------------------------+---------------+--------------- + * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash + * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD + * 0x06000000 - 0x07ffffff(CS1) | reserved | I2C + * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM + * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM + * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 + * 0x14000000 - 0x17ffffff(CS5) | I2C | USB + * 0x18000000 - 0x1bffffff(CS6) | reserved | SD + * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) + * + */ + +#define NOR_FLASH_ADDR 0x00000000 +#define NOR_FLASH_SIZE 0x04000000 + +#define PLD_BASE_ADDR 0x04000000 +#define PLD_PCICR (PLD_BASE_ADDR + 0x00) +#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02) +#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04) +#define PLD_POFCR (PLD_BASE_ADDR + 0x06) +#define PLD_LEDCR (PLD_BASE_ADDR + 0x08) +#define PLD_SWSR (PLD_BASE_ADDR + 0x0a) +#define PLD_VERSR (PLD_BASE_ADDR + 0x0c) +#define PLD_MMSR (PLD_BASE_ADDR + 0x0e) + +#define SM107_MEM_ADDR 0x10000000 +#define SM107_MEM_SIZE 0x00e00000 +#define SM107_REG_ADDR 0x13e00000 +#define SM107_REG_SIZE 0x00200000 + +#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS) +#define R8A66597_ADDR 0x14000000 /* USB */ +#define CG200_ADDR 0x18000000 /* SD */ +#define PCA9564_ADDR 0x06000000 /* I2C */ +#else +#define R8A66597_ADDR 0x08000000 +#define CG200_ADDR 0x0c000000 +#define PCA9564_ADDR 0x14000000 +#endif + +#define R8A66597_SIZE 0x00000100 +#define CG200_SIZE 0x00010000 +#define PCA9564_SIZE 0x00000100 + +#endif /* __ASM_SH_RENESAS_SH7785LCR_H */ + diff --git a/arch/sh/include/asm/sh_bios.h b/arch/sh/include/asm/sh_bios.h new file mode 100644 index 000000000000..0ca261956e3d --- /dev/null +++ b/arch/sh/include/asm/sh_bios.h @@ -0,0 +1,19 @@ +#ifndef __ASM_SH_BIOS_H +#define __ASM_SH_BIOS_H + +/* + * Copyright (C) 2000 Greg Banks, Mitch Davis + * C API to interface to the standard LinuxSH BIOS + * usually from within the early stages of kernel boot. + */ + + +extern void sh_bios_console_write(const char *buf, unsigned int len); +extern void sh_bios_char_out(char ch); +extern int sh_bios_in_gdb_mode(void); +extern void sh_bios_gdb_detach(void); + +extern void sh_bios_get_node_addr(unsigned char *node_addr); +extern void sh_bios_shutdown(unsigned int how); + +#endif /* __ASM_SH_BIOS_H */ diff --git a/arch/sh/include/asm/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h new file mode 100644 index 000000000000..b5a4dd5a9729 --- /dev/null +++ b/arch/sh/include/asm/sh_keysc.h @@ -0,0 +1,13 @@ +#ifndef __ASM_KEYSC_H__ +#define __ASM_KEYSC_H__ + +#define SH_KEYSC_MAXKEYS 30 + +struct sh_keysc_info { + enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode; + int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */ + int delay; + int keycodes[SH_KEYSC_MAXKEYS]; +}; + +#endif /* __ASM_KEYSC_H__ */ diff --git a/arch/sh/include/asm/sh_mobile_lcdc.h b/arch/sh/include/asm/sh_mobile_lcdc.h new file mode 100644 index 000000000000..27677727df4d --- /dev/null +++ b/arch/sh/include/asm/sh_mobile_lcdc.h @@ -0,0 +1,66 @@ +#ifndef __ASM_SH_MOBILE_LCDC_H__ +#define __ASM_SH_MOBILE_LCDC_H__ + +#include + +enum { RGB8, /* 24bpp, 8:8:8 */ + RGB9, /* 18bpp, 9:9 */ + RGB12A, /* 24bpp, 12:12 */ + RGB12B, /* 12bpp */ + RGB16, /* 16bpp */ + RGB18, /* 18bpp */ + RGB24, /* 24bpp */ + SYS8A, /* 24bpp, 8:8:8 */ + SYS8B, /* 18bpp, 8:8:2 */ + SYS8C, /* 18bpp, 2:8:8 */ + SYS8D, /* 16bpp, 8:8 */ + SYS9, /* 18bpp, 9:9 */ + SYS12, /* 24bpp, 12:12 */ + SYS16A, /* 16bpp */ + SYS16B, /* 18bpp, 16:2 */ + SYS16C, /* 18bpp, 2:16 */ + SYS18, /* 18bpp */ + SYS24 };/* 24bpp */ + +enum { LCDC_CHAN_DISABLED = 0, + LCDC_CHAN_MAINLCD, + LCDC_CHAN_SUBLCD }; + +enum { LCDC_CLK_BUS, LCDC_CLK_PERIPHERAL, LCDC_CLK_EXTERNAL }; + +struct sh_mobile_lcdc_sys_bus_cfg { + unsigned long ldmt2r; + unsigned long ldmt3r; +}; + +struct sh_mobile_lcdc_sys_bus_ops { + void (*write_index)(void *handle, unsigned long data); + void (*write_data)(void *handle, unsigned long data); + unsigned long (*read_data)(void *handle); +}; + +struct sh_mobile_lcdc_board_cfg { + void *board_data; + int (*setup_sys)(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); + void (*display_on)(void *board_data); + void (*display_off)(void *board_data); +}; + +struct sh_mobile_lcdc_chan_cfg { + int chan; + int bpp; + int interface_type; /* selects RGBn or SYSn I/F, see above */ + int clock_divider; + struct fb_videomode lcd_cfg; + struct sh_mobile_lcdc_board_cfg board_cfg; + struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */ +}; + +struct sh_mobile_lcdc_info { + unsigned long lddckr; + int clock_source; + struct sh_mobile_lcdc_chan_cfg ch[2]; +}; + +#endif /* __ASM_SH_MOBILE_LCDC_H__ */ diff --git a/arch/sh/include/asm/shmbuf.h b/arch/sh/include/asm/shmbuf.h new file mode 100644 index 000000000000..b2101f490521 --- /dev/null +++ b/arch/sh/include/asm/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef __ASM_SH_SHMBUF_H +#define __ASM_SH_SHMBUF_H + +/* + * The shmid64_ds structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* __ASM_SH_SHMBUF_H */ diff --git a/arch/sh/include/asm/shmin.h b/arch/sh/include/asm/shmin.h new file mode 100644 index 000000000000..36ba138a81fb --- /dev/null +++ b/arch/sh/include/asm/shmin.h @@ -0,0 +1,9 @@ +#ifndef __ASM_SH_SHMIN_H +#define __ASM_SH_SHMIN_H + +#define SHMIN_IO_BASE 0xb0000000UL + +#define SHMIN_NE_IRQ IRQ2_IRQ +#define SHMIN_NE_BASE 0x300 + +#endif diff --git a/arch/sh/include/asm/shmparam.h b/arch/sh/include/asm/shmparam.h new file mode 100644 index 000000000000..ba1758d90106 --- /dev/null +++ b/arch/sh/include/asm/shmparam.h @@ -0,0 +1,22 @@ +/* + * include/asm-sh/shmparam.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_SHMPARAM_H +#define __ASM_SH_SHMPARAM_H + +/* + * SH-4 and SH-3 7705 have an aliasing dcache. Bump this up to a sensible value + * for everyone, and work out the specifics from the probed cache descriptor. + */ +#define SHMLBA 0x4000 /* attach addr a multiple of this */ + +#define __ARCH_FORCE_SHMLBA + +#endif /* __ASM_SH_SHMPARAM_H */ diff --git a/arch/sh/include/asm/sigcontext.h b/arch/sh/include/asm/sigcontext.h new file mode 100644 index 000000000000..8ce1435bc0bf --- /dev/null +++ b/arch/sh/include/asm/sigcontext.h @@ -0,0 +1,40 @@ +#ifndef __ASM_SH_SIGCONTEXT_H +#define __ASM_SH_SIGCONTEXT_H + +struct sigcontext { + unsigned long oldmask; + +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) + /* CPU registers */ + unsigned long long sc_regs[63]; + unsigned long long sc_tregs[8]; + unsigned long long sc_pc; + unsigned long long sc_sr; + + /* FPU registers */ + unsigned long long sc_fpregs[32]; + unsigned int sc_fpscr; + unsigned int sc_fpvalid; +#else + /* CPU registers */ + unsigned long sc_regs[16]; + unsigned long sc_pc; + unsigned long sc_pr; + unsigned long sc_sr; + unsigned long sc_gbr; + unsigned long sc_mach; + unsigned long sc_macl; + +#if defined(__SH4__) || defined(CONFIG_CPU_SH4) || \ + defined(__SH2A__) || defined(CONFIG_CPU_SH2A) + /* FPU registers */ + unsigned long sc_fpregs[16]; + unsigned long sc_xfpregs[16]; + unsigned int sc_fpscr; + unsigned int sc_fpul; + unsigned int sc_ownedfp; +#endif +#endif +}; + +#endif /* __ASM_SH_SIGCONTEXT_H */ diff --git a/arch/sh/include/asm/siginfo.h b/arch/sh/include/asm/siginfo.h new file mode 100644 index 000000000000..813040ed68a9 --- /dev/null +++ b/arch/sh/include/asm/siginfo.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_SIGINFO_H +#define __ASM_SH_SIGINFO_H + +#include + +#endif /* __ASM_SH_SIGINFO_H */ diff --git a/arch/sh/include/asm/signal.h b/arch/sh/include/asm/signal.h new file mode 100644 index 000000000000..5c5c1e852089 --- /dev/null +++ b/arch/sh/include/asm/signal.h @@ -0,0 +1,160 @@ +#ifndef __ASM_SH_SIGNAL_H +#define __ASM_SH_SIGNAL_H + +#include + +/* Avoid too many header ordering problems. */ +struct pt_regs; +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +#include + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_SIGNAL_H */ diff --git a/arch/sh/include/asm/smc37c93x.h b/arch/sh/include/asm/smc37c93x.h new file mode 100644 index 000000000000..585da2a8fc45 --- /dev/null +++ b/arch/sh/include/asm/smc37c93x.h @@ -0,0 +1,190 @@ +#ifndef __ASM_SH_SMC37C93X_H +#define __ASM_SH_SMC37C93X_H + +/* + * linux/include/asm-sh/smc37c93x.h + * + * Copyright (C) 2000 Kazumoto Kojima + * + * SMSC 37C93x Super IO Chip support + */ + +/* Default base I/O address */ +#define FDC_PRIMARY_BASE 0x3f0 +#define IDE1_PRIMARY_BASE 0x1f0 +#define IDE1_SECONDARY_BASE 0x170 +#define PARPORT_PRIMARY_BASE 0x378 +#define COM1_PRIMARY_BASE 0x2f8 +#define COM2_PRIMARY_BASE 0x3f8 +#define RTC_PRIMARY_BASE 0x070 +#define KBC_PRIMARY_BASE 0x060 +#define AUXIO_PRIMARY_BASE 0x000 /* XXX */ + +/* Logical device number */ +#define LDN_FDC 0 +#define LDN_IDE1 1 +#define LDN_IDE2 2 +#define LDN_PARPORT 3 +#define LDN_COM1 4 +#define LDN_COM2 5 +#define LDN_RTC 6 +#define LDN_KBC 7 +#define LDN_AUXIO 8 + +/* Configuration port and key */ +#define CONFIG_PORT 0x3f0 +#define INDEX_PORT CONFIG_PORT +#define DATA_PORT 0x3f1 +#define CONFIG_ENTER 0x55 +#define CONFIG_EXIT 0xaa + +/* Configuration index */ +#define CURRENT_LDN_INDEX 0x07 +#define POWER_CONTROL_INDEX 0x22 +#define ACTIVATE_INDEX 0x30 +#define IO_BASE_HI_INDEX 0x60 +#define IO_BASE_LO_INDEX 0x61 +#define IRQ_SELECT_INDEX 0x70 +#define DMA_SELECT_INDEX 0x74 + +#define GPIO46_INDEX 0xc6 +#define GPIO47_INDEX 0xc7 + +/* UART stuff. Only for debugging. */ +/* UART Register */ + +#define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */ +#define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */ +#define UART_IER 0x2 /* Interrupt Enable Register */ +#define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */ +#define UART_FCR 0x4 /* FIFO Control Register (Write Only) */ +#define UART_LCR 0x6 /* Line Control Register */ +#define UART_MCR 0x8 /* MODEM Control Register */ +#define UART_LSR 0xa /* Line Status Register */ +#define UART_MSR 0xc /* MODEM Status Register */ +#define UART_SCR 0xe /* Scratch Register */ +#define UART_DLL 0x0 /* Divisor Latch (LS) */ +#define UART_DLM 0x2 /* Divisor Latch (MS) */ + +#ifndef __ASSEMBLY__ +typedef struct uart_reg { + volatile __u16 rbr; + volatile __u16 ier; + volatile __u16 iir; + volatile __u16 lcr; + volatile __u16 mcr; + volatile __u16 lsr; + volatile __u16 msr; + volatile __u16 scr; +} uart_reg; +#endif /* ! __ASSEMBLY__ */ + +/* Alias for Write Only Register */ + +#define thr rbr +#define tcr iir + +/* Alias for Divisor Latch Register */ + +#define dll rbr +#define dlm ier +#define fcr iir + +/* Interrupt Enable Register */ + +#define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */ +#define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */ +#define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */ +#define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */ + +/* Interrupt Ident Register */ + +#define IIR_IP 0x0100 /* "0" if Interrupt Pending */ +#define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */ +#define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */ +#define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */ +#define IIR_FIFO 0xc000 /* FIFOs enabled */ + +/* FIFO Control Register */ + +#define FCR_FEN 0x0100 /* FIFO enable */ +#define FCR_RFRES 0x0200 /* Receiver FIFO reset */ +#define FCR_TFRES 0x0400 /* Transmitter FIFO reset */ +#define FCR_DMA 0x0800 /* DMA mode select */ +#define FCR_RTL 0x4000 /* Receiver triger (LSB) */ +#define FCR_RTM 0x8000 /* Receiver triger (MSB) */ + +/* Line Control Register */ + +#define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */ +#define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */ +#define LCR_STB 0x0400 /* Number of Stop Bits */ +#define LCR_PEN 0x0800 /* Parity Enable */ +#define LCR_EPS 0x1000 /* Even Parity Select */ +#define LCR_SP 0x2000 /* Stick Parity */ +#define LCR_SB 0x4000 /* Set Break */ +#define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */ + +/* MODEM Control Register */ + +#define MCR_DTR 0x0100 /* Data Terminal Ready */ +#define MCR_RTS 0x0200 /* Request to Send */ +#define MCR_OUT1 0x0400 /* Out 1 */ +#define MCR_IRQEN 0x0800 /* IRQ Enable */ +#define MCR_LOOP 0x1000 /* Loop */ + +/* Line Status Register */ + +#define LSR_DR 0x0100 /* Data Ready */ +#define LSR_OE 0x0200 /* Overrun Error */ +#define LSR_PE 0x0400 /* Parity Error */ +#define LSR_FE 0x0800 /* Framing Error */ +#define LSR_BI 0x1000 /* Break Interrupt */ +#define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */ +#define LSR_TEMT 0x4000 /* Transmitter Empty */ +#define LSR_FIFOE 0x8000 /* Receiver FIFO error */ + +/* MODEM Status Register */ + +#define MSR_DCTS 0x0100 /* Delta Clear to Send */ +#define MSR_DDSR 0x0200 /* Delta Data Set Ready */ +#define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */ +#define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */ +#define MSR_CTS 0x1000 /* Clear to Send */ +#define MSR_DSR 0x2000 /* Data Set Ready */ +#define MSR_RI 0x4000 /* Ring Indicator */ +#define MSR_DCD 0x8000 /* Data Carrier Detect */ + +/* Baud Rate Divisor */ + +#define UART_CLK (1843200) /* 1.8432 MHz */ +#define UART_BAUD(x) (UART_CLK / (16 * (x))) + +/* RTC register definition */ +#define RTC_SECONDS 0 +#define RTC_SECONDS_ALARM 1 +#define RTC_MINUTES 2 +#define RTC_MINUTES_ALARM 3 +#define RTC_HOURS 4 +#define RTC_HOURS_ALARM 5 +#define RTC_DAY_OF_WEEK 6 +#define RTC_DAY_OF_MONTH 7 +#define RTC_MONTH 8 +#define RTC_YEAR 9 +#define RTC_FREQ_SELECT 10 +# define RTC_UIP 0x80 +# define RTC_DIV_CTL 0x70 +/* This RTC can work under 32.768KHz clock only. */ +# define RTC_OSC_ENABLE 0x20 +# define RTC_OSC_DISABLE 0x00 +#define RTC_CONTROL 11 +# define RTC_SET 0x80 +# define RTC_PIE 0x40 +# define RTC_AIE 0x20 +# define RTC_UIE 0x10 +# define RTC_SQWE 0x08 +# define RTC_DM_BINARY 0x04 +# define RTC_24H 0x02 +# define RTC_DST_EN 0x01 + +#endif /* __ASM_SH_SMC37C93X_H */ diff --git a/arch/sh/include/asm/smp.h b/arch/sh/include/asm/smp.h new file mode 100644 index 000000000000..593343cd26ee --- /dev/null +++ b/arch/sh/include/asm/smp.h @@ -0,0 +1,50 @@ +#ifndef __ASM_SH_SMP_H +#define __ASM_SH_SMP_H + +#include +#include + +#ifdef CONFIG_SMP + +#include +#include +#include + +#define raw_smp_processor_id() (current_thread_info()->cpu) +#define hard_smp_processor_id() plat_smp_processor_id() + +/* Map from cpu id to sequential logical cpu number. */ +extern int __cpu_number_map[NR_CPUS]; +#define cpu_number_map(cpu) __cpu_number_map[cpu] + +/* The reverse map from sequential logical cpu number to cpu id. */ +extern int __cpu_logical_map[NR_CPUS]; +#define cpu_logical_map(cpu) __cpu_logical_map[cpu] + +/* I've no idea what the real meaning of this is */ +#define PROC_CHANGE_PENALTY 20 + +#define NO_PROC_ID (-1) + +#define SMP_MSG_FUNCTION 0 +#define SMP_MSG_RESCHEDULE 1 +#define SMP_MSG_FUNCTION_SINGLE 2 +#define SMP_MSG_NR 3 + +void plat_smp_setup(void); +void plat_prepare_cpus(unsigned int max_cpus); +int plat_smp_processor_id(void); +void plat_start_cpu(unsigned int cpu, unsigned long entry_point); +void plat_send_ipi(unsigned int cpu, unsigned int message); +int plat_register_ipi_handler(unsigned int message, + void (*handler)(void *), void *arg); +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi(cpumask_t mask); + +#else + +#define hard_smp_processor_id() (0) + +#endif /* CONFIG_SMP */ + +#endif /* __ASM_SH_SMP_H */ diff --git a/arch/sh/include/asm/snapgear.h b/arch/sh/include/asm/snapgear.h new file mode 100644 index 000000000000..042d95f51c4d --- /dev/null +++ b/arch/sh/include/asm/snapgear.h @@ -0,0 +1,71 @@ +/* + * include/asm-sh/snapgear.h + * + * Modified version of io_se.h for the snapgear-specific functions. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * IO functions for a SnapGear + */ + +#ifndef _ASM_SH_IO_SNAPGEAR_H +#define _ASM_SH_IO_SNAPGEAR_H + +#if defined(CONFIG_CPU_SH4) +/* + * The external interrupt lines, these take up ints 0 - 15 inclusive + * depending on the priority for the interrupt. In fact the priority + * is the interrupt :-) + */ + +#define IRL0_IRQ 2 +#define IRL0_PRIORITY 13 + +#define IRL1_IRQ 5 +#define IRL1_PRIORITY 10 + +#define IRL2_IRQ 8 +#define IRL2_PRIORITY 7 + +#define IRL3_IRQ 11 +#define IRL3_PRIORITY 4 +#endif + +#define __IO_PREFIX snapgear +#include + +#ifdef CONFIG_SH_SECUREEDGE5410 +/* + * We need to remember what was written to the ioport as some bits + * are shared with other functions and you cannot read back what was + * written :-| + * + * Bit Read Write + * ----------------------------------------------- + * D0 DCD on ttySC1 power + * D1 Reset Switch heatbeat + * D2 ttySC0 CTS (7100) LAN + * D3 - WAN + * D4 ttySC0 DCD (7100) CONSOLE + * D5 - ONLINE + * D6 - VPN + * D7 - DTR on ttySC1 + * D8 - ttySC0 RTS (7100) + * D9 - ttySC0 DTR (7100) + * D10 - RTC SCLK + * D11 RTC DATA RTC DATA + * D12 - RTS RESET + */ + +#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000) +extern unsigned short secureedge5410_ioport; + +#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \ + (secureedge5410_ioport = \ + ((secureedge5410_ioport & ~(mask)) | ((val) & (mask))))) +#define SECUREEDGE_READ_IOPORT() \ + ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817)) +#endif + +#endif /* _ASM_SH_IO_SNAPGEAR_H */ diff --git a/arch/sh/include/asm/socket.h b/arch/sh/include/asm/socket.h new file mode 100644 index 000000000000..6d4bf6512959 --- /dev/null +++ b/arch/sh/include/asm/socket.h @@ -0,0 +1,57 @@ +#ifndef __ASM_SH_SOCKET_H +#define __ASM_SH_SOCKET_H + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_RCVBUFFORCE 32 +#define SO_SNDBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#endif /* __ASM_SH_SOCKET_H */ diff --git a/arch/sh/include/asm/sockios.h b/arch/sh/include/asm/sockios.h new file mode 100644 index 000000000000..cf8b96b1f9ab --- /dev/null +++ b/arch/sh/include/asm/sockios.h @@ -0,0 +1,14 @@ +#ifndef __ASM_SH_SOCKIOS_H +#define __ASM_SH_SOCKIOS_H + +/* Socket-level I/O control calls. */ +#define FIOGETOWN _IOR('f', 123, int) +#define FIOSETOWN _IOW('f', 124, int) + +#define SIOCATMARK _IOR('s', 7, int) +#define SIOCSPGRP _IOW('s', 8, pid_t) +#define SIOCGPGRP _IOR('s', 9, pid_t) + +#define SIOCGSTAMP _IOR('s', 100, struct timeval) /* Get stamp (timeval) */ +#define SIOCGSTAMPNS _IOR('s', 101, struct timespec) /* Get stamp (timespec) */ +#endif /* __ASM_SH_SOCKIOS_H */ diff --git a/arch/sh/include/asm/sparsemem.h b/arch/sh/include/asm/sparsemem.h new file mode 100644 index 000000000000..547a540b6667 --- /dev/null +++ b/arch/sh/include/asm/sparsemem.h @@ -0,0 +1,16 @@ +#ifndef __ASM_SH_SPARSEMEM_H +#define __ASM_SH_SPARSEMEM_H + +#ifdef __KERNEL__ +/* + * SECTION_SIZE_BITS 2^N: how big each section will be + * MAX_PHYSADDR_BITS 2^N: how much physical address space we have + * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space + */ +#define SECTION_SIZE_BITS 26 +#define MAX_PHYSADDR_BITS 32 +#define MAX_PHYSMEM_BITS 32 + +#endif + +#endif /* __ASM_SH_SPARSEMEM_H */ diff --git a/arch/sh/include/asm/spi.h b/arch/sh/include/asm/spi.h new file mode 100644 index 000000000000..e96f5b0953c8 --- /dev/null +++ b/arch/sh/include/asm/spi.h @@ -0,0 +1,13 @@ +#ifndef __ASM_SPI_H__ +#define __ASM_SPI_H__ + +struct sh_spi_info; + +struct sh_spi_info { + int bus_num; + int num_chipselect; + + void (*chip_select)(struct sh_spi_info *spi, int cs, int state); +}; + +#endif /* __ASM_SPI_H__ */ diff --git a/arch/sh/include/asm/spinlock.h b/arch/sh/include/asm/spinlock.h new file mode 100644 index 000000000000..e793181d64da --- /dev/null +++ b/arch/sh/include/asm/spinlock.h @@ -0,0 +1,223 @@ +/* + * include/asm-sh/spinlock.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * Copyright (C) 2006, 2007 Akio Idehara + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_SPINLOCK_H +#define __ASM_SH_SPINLOCK_H + +/* + * The only locking implemented here uses SH-4A opcodes. For others, + * split this out as per atomic-*.h. + */ +#ifndef CONFIG_CPU_SH4A +#error "Need movli.l/movco.l for spinlocks" +#endif + +/* + * Your basic SMP spinlocks, allowing only a single CPU anywhere + */ + +#define __raw_spin_is_locked(x) ((x)->lock <= 0) +#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) +#define __raw_spin_unlock_wait(x) \ + do { cpu_relax(); } while ((x)->lock) + +/* + * Simple spin lock operations. There are two variants, one clears IRQ's + * on the local processor, one does not. + * + * We make no fairness assumptions. They have a cost. + */ +static inline void __raw_spin_lock(raw_spinlock_t *lock) +{ + unsigned long tmp; + unsigned long oldval; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%2, %0 ! __raw_spin_lock \n\t" + "mov %0, %1 \n\t" + "mov #0, %0 \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "cmp/pl %1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp), "=&r" (oldval) + : "r" (&lock->lock) + : "t", "memory" + ); +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lock) +{ + unsigned long tmp; + + __asm__ __volatile__ ( + "mov #1, %0 ! __raw_spin_unlock \n\t" + "mov.l %0, @%1 \n\t" + : "=&z" (tmp) + : "r" (&lock->lock) + : "t", "memory" + ); +} + +static inline int __raw_spin_trylock(raw_spinlock_t *lock) +{ + unsigned long tmp, oldval; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%2, %0 ! __raw_spin_trylock \n\t" + "mov %0, %1 \n\t" + "mov #0, %0 \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "synco \n\t" + : "=&z" (tmp), "=&r" (oldval) + : "r" (&lock->lock) + : "t", "memory" + ); + + return oldval; +} + +/* + * Read-write spinlocks, allowing multiple readers but only one writer. + * + * NOTE! it is quite common to have readers in interrupts but no interrupt + * writers. For those circumstances we can "mix" irq-safe locks - any writer + * needs to get a irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + */ + +/** + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_read_can_lock(x) ((x)->lock > 0) + +/** + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS) + +static inline void __raw_read_lock(raw_rwlock_t *rw) +{ + unsigned long tmp; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%1, %0 ! __raw_read_lock \n\t" + "cmp/pl %0 \n\t" + "bf 1b \n\t" + "add #-1, %0 \n\t" + "movco.l %0, @%1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp) + : "r" (&rw->lock) + : "t", "memory" + ); +} + +static inline void __raw_read_unlock(raw_rwlock_t *rw) +{ + unsigned long tmp; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%1, %0 ! __raw_read_unlock \n\t" + "add #1, %0 \n\t" + "movco.l %0, @%1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp) + : "r" (&rw->lock) + : "t", "memory" + ); +} + +static inline void __raw_write_lock(raw_rwlock_t *rw) +{ + unsigned long tmp; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%1, %0 ! __raw_write_lock \n\t" + "cmp/hs %2, %0 \n\t" + "bf 1b \n\t" + "sub %2, %0 \n\t" + "movco.l %0, @%1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp) + : "r" (&rw->lock), "r" (RW_LOCK_BIAS) + : "t", "memory" + ); +} + +static inline void __raw_write_unlock(raw_rwlock_t *rw) +{ + __asm__ __volatile__ ( + "mov.l %1, @%0 ! __raw_write_unlock \n\t" + : + : "r" (&rw->lock), "r" (RW_LOCK_BIAS) + : "t", "memory" + ); +} + +static inline int __raw_read_trylock(raw_rwlock_t *rw) +{ + unsigned long tmp, oldval; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%2, %0 ! __raw_read_trylock \n\t" + "mov %0, %1 \n\t" + "cmp/pl %0 \n\t" + "bf 2f \n\t" + "add #-1, %0 \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "2: \n\t" + "synco \n\t" + : "=&z" (tmp), "=&r" (oldval) + : "r" (&rw->lock) + : "t", "memory" + ); + + return (oldval > 0); +} + +static inline int __raw_write_trylock(raw_rwlock_t *rw) +{ + unsigned long tmp, oldval; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%2, %0 ! __raw_write_trylock \n\t" + "mov %0, %1 \n\t" + "cmp/hs %3, %0 \n\t" + "bf 2f \n\t" + "sub %3, %0 \n\t" + "2: \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "synco \n\t" + : "=&z" (tmp), "=&r" (oldval) + : "r" (&rw->lock), "r" (RW_LOCK_BIAS) + : "t", "memory" + ); + + return (oldval > (RW_LOCK_BIAS - 1)); +} + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* __ASM_SH_SPINLOCK_H */ diff --git a/arch/sh/include/asm/spinlock_types.h b/arch/sh/include/asm/spinlock_types.h new file mode 100644 index 000000000000..b4d244e7b60c --- /dev/null +++ b/arch/sh/include/asm/spinlock_types.h @@ -0,0 +1,21 @@ +#ifndef __ASM_SH_SPINLOCK_TYPES_H +#define __ASM_SH_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct { + volatile unsigned int lock; +} raw_spinlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 1 } + +typedef struct { + volatile unsigned int lock; +} raw_rwlock_t; + +#define RW_LOCK_BIAS 0x01000000 +#define __RAW_RW_LOCK_UNLOCKED { RW_LOCK_BIAS } + +#endif diff --git a/arch/sh/include/asm/stat.h b/arch/sh/include/asm/stat.h new file mode 100644 index 000000000000..e1810cc6e3da --- /dev/null +++ b/arch/sh/include/asm/stat.h @@ -0,0 +1,138 @@ +#ifndef __ASM_SH_STAT_H +#define __ASM_SH_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned short st_dev; + unsigned char __pad0[10]; + + unsigned long st_ino; + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned short st_rdev; + unsigned char __pad3[10]; + + long long st_size; + unsigned long st_blksize; + + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __pad4; /* future possible st_blocks high bits */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ + + unsigned long __unused1; + unsigned long __unused2; +}; +#else +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned long st_rdev; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad0[4]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[4]; + + long long st_size; + unsigned long st_blksize; + + unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#define STAT_HAVE_NSEC 1 +#endif + +#endif /* __ASM_SH_STAT_H */ diff --git a/arch/sh/include/asm/statfs.h b/arch/sh/include/asm/statfs.h new file mode 100644 index 000000000000..9202a023328f --- /dev/null +++ b/arch/sh/include/asm/statfs.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_STATFS_H +#define __ASM_SH_STATFS_H + +#include + +#endif /* __ASM_SH_STATFS_H */ diff --git a/arch/sh/include/asm/string.h b/arch/sh/include/asm/string.h new file mode 100644 index 000000000000..8c1ea21dc0ae --- /dev/null +++ b/arch/sh/include/asm/string.h @@ -0,0 +1,5 @@ +#ifdef CONFIG_SUPERH32 +# include "string_32.h" +#else +# include "string_64.h" +#endif diff --git a/arch/sh/include/asm/string_32.h b/arch/sh/include/asm/string_32.h new file mode 100644 index 000000000000..55f8db6bc1d7 --- /dev/null +++ b/arch/sh/include/asm/string_32.h @@ -0,0 +1,131 @@ +#ifndef __ASM_SH_STRING_H +#define __ASM_SH_STRING_H + +#ifdef __KERNEL__ + +/* + * Copyright (C) 1999 Niibe Yutaka + * But consider these trivial functions to be public domain. + */ + +#define __HAVE_ARCH_STRCPY +static inline char *strcpy(char *__dest, const char *__src) +{ + register char *__xdest = __dest; + unsigned long __dummy; + + __asm__ __volatile__("1:\n\t" + "mov.b @%1+, %2\n\t" + "mov.b %2, @%0\n\t" + "cmp/eq #0, %2\n\t" + "bf/s 1b\n\t" + " add #1, %0\n\t" + : "=r" (__dest), "=r" (__src), "=&z" (__dummy) + : "0" (__dest), "1" (__src) + : "memory", "t"); + + return __xdest; +} + +#define __HAVE_ARCH_STRNCPY +static inline char *strncpy(char *__dest, const char *__src, size_t __n) +{ + register char *__xdest = __dest; + unsigned long __dummy; + + if (__n == 0) + return __xdest; + + __asm__ __volatile__( + "1:\n" + "mov.b @%1+, %2\n\t" + "mov.b %2, @%0\n\t" + "cmp/eq #0, %2\n\t" + "bt/s 2f\n\t" + " cmp/eq %5,%1\n\t" + "bf/s 1b\n\t" + " add #1, %0\n" + "2:" + : "=r" (__dest), "=r" (__src), "=&z" (__dummy) + : "0" (__dest), "1" (__src), "r" (__src+__n) + : "memory", "t"); + + return __xdest; +} + +#define __HAVE_ARCH_STRCMP +static inline int strcmp(const char *__cs, const char *__ct) +{ + register int __res; + unsigned long __dummy; + + __asm__ __volatile__( + "mov.b @%1+, %3\n" + "1:\n\t" + "mov.b @%0+, %2\n\t" + "cmp/eq #0, %3\n\t" + "bt 2f\n\t" + "cmp/eq %2, %3\n\t" + "bt/s 1b\n\t" + " mov.b @%1+, %3\n\t" + "add #-2, %1\n\t" + "mov.b @%1, %3\n\t" + "sub %3, %2\n" + "2:" + : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) + : "0" (__cs), "1" (__ct) + : "t"); + + return __res; +} + +#define __HAVE_ARCH_STRNCMP +static inline int strncmp(const char *__cs, const char *__ct, size_t __n) +{ + register int __res; + unsigned long __dummy; + + if (__n == 0) + return 0; + + __asm__ __volatile__( + "mov.b @%1+, %3\n" + "1:\n\t" + "mov.b @%0+, %2\n\t" + "cmp/eq %6, %0\n\t" + "bt/s 2f\n\t" + " cmp/eq #0, %3\n\t" + "bt/s 3f\n\t" + " cmp/eq %3, %2\n\t" + "bt/s 1b\n\t" + " mov.b @%1+, %3\n\t" + "add #-2, %1\n\t" + "mov.b @%1, %3\n" + "2:\n\t" + "sub %3, %2\n" + "3:" + :"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) + : "0" (__cs), "1" (__ct), "r" (__cs+__n) + : "t"); + + return __res; +} + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *__s, int __c, size_t __count); + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *__to, __const__ void *__from, size_t __n); + +#define __HAVE_ARCH_MEMMOVE +extern void *memmove(void *__dest, __const__ void *__src, size_t __n); + +#define __HAVE_ARCH_MEMCHR +extern void *memchr(const void *__s, int __c, size_t __n); + +#define __HAVE_ARCH_STRLEN +extern size_t strlen(const char *); + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_STRING_H */ diff --git a/arch/sh/include/asm/string_64.h b/arch/sh/include/asm/string_64.h new file mode 100644 index 000000000000..aa1fef229c78 --- /dev/null +++ b/arch/sh/include/asm/string_64.h @@ -0,0 +1,17 @@ +#ifndef __ASM_SH_STRING_64_H +#define __ASM_SH_STRING_64_H + +/* + * include/asm-sh/string_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *dest, const void *src, size_t count); + +#endif /* __ASM_SH_STRING_64_H */ diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h new file mode 100644 index 000000000000..056d68cd2108 --- /dev/null +++ b/arch/sh/include/asm/system.h @@ -0,0 +1,190 @@ +#ifndef __ASM_SH_SYSTEM_H +#define __ASM_SH_SYSTEM_H + +/* + * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima + * Copyright (C) 2002 Paul Mundt + */ + +#include +#include +#include +#include +#include + +#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */ + +#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) +#define __icbi() \ +{ \ + unsigned long __addr; \ + __addr = 0xa8000000; \ + __asm__ __volatile__( \ + "icbi %0\n\t" \ + : /* no output */ \ + : "m" (__m(__addr))); \ +} +#endif + +/* + * A brief note on ctrl_barrier(), the control register write barrier. + * + * Legacy SH cores typically require a sequence of 8 nops after + * modification of a control register in order for the changes to take + * effect. On newer cores (like the sh4a and sh5) this is accomplished + * with icbi. + * + * Also note that on sh4a in the icbi case we can forego a synco for the + * write barrier, as it's not necessary for control registers. + * + * Historically we have only done this type of barrier for the MMUCR, but + * it's also necessary for the CCR, so we make it generic here instead. + */ +#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) +#define mb() __asm__ __volatile__ ("synco": : :"memory") +#define rmb() mb() +#define wmb() __asm__ __volatile__ ("synco": : :"memory") +#define ctrl_barrier() __icbi() +#define read_barrier_depends() do { } while(0) +#else +#define mb() __asm__ __volatile__ ("": : :"memory") +#define rmb() mb() +#define wmb() __asm__ __volatile__ ("": : :"memory") +#define ctrl_barrier() __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop") +#define read_barrier_depends() do { } while(0) +#endif + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while(0) +#endif + +#define set_mb(var, value) do { (void)xchg(&var, value); } while (0) + +#ifdef CONFIG_GUSA_RB +#include +#else +#include +#endif + +extern void __xchg_called_with_bad_pointer(void); + +#define __xchg(ptr, x, size) \ +({ \ + unsigned long __xchg__res; \ + volatile void *__xchg_ptr = (ptr); \ + switch (size) { \ + case 4: \ + __xchg__res = xchg_u32(__xchg_ptr, x); \ + break; \ + case 1: \ + __xchg__res = xchg_u8(__xchg_ptr, x); \ + break; \ + default: \ + __xchg_called_with_bad_pointer(); \ + __xchg__res = x; \ + break; \ + } \ + \ + __xchg__res; \ +}) + +#define xchg(ptr,x) \ + ((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr)))) + +/* This function doesn't exist, so you'll get a linker error + * if something tries to do an invalid cmpxchg(). */ +extern void __cmpxchg_called_with_bad_pointer(void); + +#define __HAVE_ARCH_CMPXCHG 1 + +static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32(ptr, old, new); + } + __cmpxchg_called_with_bad_pointer(); + return old; +} + +#define cmpxchg(ptr,o,n) \ + ({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ + }) + +extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn)); + +extern void *set_exception_table_vec(unsigned int vec, void *handler); + +static inline void *set_exception_table_evt(unsigned int evt, void *handler) +{ + return set_exception_table_vec(evt >> 5, handler); +} + +/* + * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks. + */ +#ifdef CONFIG_CPU_SH2A +extern unsigned int instruction_size(unsigned int insn); +#elif defined(CONFIG_SUPERH32) +#define instruction_size(insn) (2) +#else +#define instruction_size(insn) (4) +#endif + +extern unsigned long cached_to_uncached; + +extern struct dentry *sh_debugfs_root; + +void per_cpu_trap_init(void); + +asmlinkage void break_point_trap(void); + +#ifdef CONFIG_SUPERH32 +#define BUILD_TRAP_HANDLER(name) \ +asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5, \ + unsigned long r6, unsigned long r7, \ + struct pt_regs __regs) + +#define TRAP_HANDLER_DECL \ + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); \ + unsigned int vec = regs->tra; \ + (void)vec; +#else +#define BUILD_TRAP_HANDLER(name) \ +asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs) +#define TRAP_HANDLER_DECL +#endif + +BUILD_TRAP_HANDLER(address_error); +BUILD_TRAP_HANDLER(debug); +BUILD_TRAP_HANDLER(bug); +BUILD_TRAP_HANDLER(fpu_error); +BUILD_TRAP_HANDLER(fpu_state_restore); + +#define arch_align_stack(x) (x) + +struct mem_access { + unsigned long (*from)(void *dst, const void *src, unsigned long cnt); + unsigned long (*to)(void *dst, const void *src, unsigned long cnt); +}; + +#ifdef CONFIG_SUPERH32 +# include "system_32.h" +#else +# include "system_64.h" +#endif + +#endif diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h new file mode 100644 index 000000000000..f11bcf0855ed --- /dev/null +++ b/arch/sh/include/asm/system_32.h @@ -0,0 +1,102 @@ +#ifndef __ASM_SH_SYSTEM_32_H +#define __ASM_SH_SYSTEM_32_H + +#include + +struct task_struct *__switch_to(struct task_struct *prev, + struct task_struct *next); + +/* + * switch_to() should switch tasks to task nr n, first + */ +#define switch_to(prev, next, last) \ +do { \ + register u32 *__ts1 __asm__ ("r1") = (u32 *)&prev->thread.sp; \ + register u32 *__ts2 __asm__ ("r2") = (u32 *)&prev->thread.pc; \ + register u32 *__ts4 __asm__ ("r4") = (u32 *)prev; \ + register u32 *__ts5 __asm__ ("r5") = (u32 *)next; \ + register u32 *__ts6 __asm__ ("r6") = (u32 *)&next->thread.sp; \ + register u32 __ts7 __asm__ ("r7") = next->thread.pc; \ + struct task_struct *__last; \ + \ + __asm__ __volatile__ ( \ + ".balign 4\n\t" \ + "stc.l gbr, @-r15\n\t" \ + "sts.l pr, @-r15\n\t" \ + "mov.l r8, @-r15\n\t" \ + "mov.l r9, @-r15\n\t" \ + "mov.l r10, @-r15\n\t" \ + "mov.l r11, @-r15\n\t" \ + "mov.l r12, @-r15\n\t" \ + "mov.l r13, @-r15\n\t" \ + "mov.l r14, @-r15\n\t" \ + "mov.l r15, @r1\t! save SP\n\t" \ + "mov.l @r6, r15\t! change to new stack\n\t" \ + "mova 1f, %0\n\t" \ + "mov.l %0, @r2\t! save PC\n\t" \ + "mov.l 2f, %0\n\t" \ + "jmp @%0\t! call __switch_to\n\t" \ + " lds r7, pr\t! with return to new PC\n\t" \ + ".balign 4\n" \ + "2:\n\t" \ + ".long __switch_to\n" \ + "1:\n\t" \ + "mov.l @r15+, r14\n\t" \ + "mov.l @r15+, r13\n\t" \ + "mov.l @r15+, r12\n\t" \ + "mov.l @r15+, r11\n\t" \ + "mov.l @r15+, r10\n\t" \ + "mov.l @r15+, r9\n\t" \ + "mov.l @r15+, r8\n\t" \ + "lds.l @r15+, pr\n\t" \ + "ldc.l @r15+, gbr\n\t" \ + : "=z" (__last) \ + : "r" (__ts1), "r" (__ts2), "r" (__ts4), \ + "r" (__ts5), "r" (__ts6), "r" (__ts7) \ + : "r3", "t"); \ + \ + last = __last; \ +} while (0) + +#define __uses_jump_to_uncached __attribute__ ((__section__ (".uncached.text"))) + +/* + * Jump to uncached area. + * When handling TLB or caches, we need to do it from an uncached area. + */ +#define jump_to_uncached() \ +do { \ + unsigned long __dummy; \ + \ + __asm__ __volatile__( \ + "mova 1f, %0\n\t" \ + "add %1, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1:" \ + : "=&z" (__dummy) \ + : "r" (cached_to_uncached)); \ +} while (0) + +/* + * Back to cached area. + */ +#define back_to_cached() \ +do { \ + unsigned long __dummy; \ + ctrl_barrier(); \ + __asm__ __volatile__( \ + "mov.l 1f, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1: .long 2f\n" \ + "2:" \ + : "=&r" (__dummy)); \ +} while (0) + +int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs, + struct mem_access *ma); + +#endif /* __ASM_SH_SYSTEM_32_H */ diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h new file mode 100644 index 000000000000..943acf5ea07c --- /dev/null +++ b/arch/sh/include/asm/system_64.h @@ -0,0 +1,40 @@ +#ifndef __ASM_SH_SYSTEM_64_H +#define __ASM_SH_SYSTEM_64_H + +/* + * include/asm-sh/system_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include + +/* + * switch_to() should switch tasks to task nr n, first + */ +struct task_struct *sh64_switch_to(struct task_struct *prev, + struct thread_struct *prev_thread, + struct task_struct *next, + struct thread_struct *next_thread); + +#define switch_to(prev,next,last) \ +do { \ + if (last_task_used_math != next) { \ + struct pt_regs *regs = next->thread.uregs; \ + if (regs) regs->sr |= SR_FD; \ + } \ + last = sh64_switch_to(prev, &prev->thread, next, \ + &next->thread); \ +} while (0) + +#define __uses_jump_to_uncached + +#define jump_to_uncached() do { } while (0) +#define back_to_cached() do { } while (0) + +#endif /* __ASM_SH_SYSTEM_64_H */ diff --git a/arch/sh/include/asm/systemh7751.h b/arch/sh/include/asm/systemh7751.h new file mode 100644 index 000000000000..4161122c84ef --- /dev/null +++ b/arch/sh/include/asm/systemh7751.h @@ -0,0 +1,71 @@ +#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H +#define __ASM_SH_SYSTEMH_7751SYSTEMH_H + +/* + * linux/include/asm-sh/systemh/7751systemh.h + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SystemH support + + * Modified for 7751 SystemH by + * Jonathan Short, 2002. + */ + +/* Box specific addresses. */ + +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0x01000000 /* EPROM */ +#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0x12000000 +#define PA_EXT4_SIZE 0x02000000 +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ + +#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */ +#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */ +#define PA_LED 0xba000000 /* LED */ +#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ + +#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_MODE (PA_MRSHPC + 4) +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define BCR_ILCRA (PA_BCR + 0) +#define BCR_ILCRB (PA_BCR + 2) +#define BCR_ILCRC (PA_BCR + 4) +#define BCR_ILCRD (PA_BCR + 6) +#define BCR_ILCRE (PA_BCR + 8) +#define BCR_ILCRF (PA_BCR + 10) +#define BCR_ILCRG (PA_BCR + 12) + +#define IRQ_79C973 13 + +#define __IO_PREFIX sh7751systemh +#include + +#endif /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */ diff --git a/arch/sh/include/asm/termbits.h b/arch/sh/include/asm/termbits.h new file mode 100644 index 000000000000..77db116948cf --- /dev/null +++ b/arch/sh/include/asm/termbits.h @@ -0,0 +1,198 @@ +#ifndef __ASM_SH_TERMBITS_H +#define __ASM_SH_TERMBITS_H + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* __ASM_SH_TERMBITS_H */ diff --git a/arch/sh/include/asm/termios.h b/arch/sh/include/asm/termios.h new file mode 100644 index 000000000000..0a8c793c76f2 --- /dev/null +++ b/arch/sh/include/asm/termios.h @@ -0,0 +1,90 @@ +#ifndef __ASM_SH_TERMIOS_H +#define __ASM_SH_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +#ifdef __KERNEL__ + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp,&(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_TERMIOS_H */ diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h new file mode 100644 index 000000000000..eeb4c747119e --- /dev/null +++ b/arch/sh/include/asm/thread_info.h @@ -0,0 +1,141 @@ +#ifndef __ASM_SH_THREAD_INFO_H +#define __ASM_SH_THREAD_INFO_H + +/* SuperH version + * Copyright (C) 2002 Niibe Yutaka + * + * The copyright of original i386 version is: + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ +#ifdef __KERNEL__ +#include + +#ifndef __ASSEMBLY__ +#include + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + __u32 cpu; + int preempt_count; /* 0 => preemptable, <0 => BUG */ + mm_segment_t addr_limit; /* thread address space */ + struct restart_block restart_block; + unsigned long previous_sp; /* sp of previous stack in case + of nested IRQ stacks */ + __u8 supervisor_stack[0]; +}; + +#endif + +#define PREEMPT_ACTIVE 0x10000000 + +#if defined(CONFIG_4KSTACKS) +#define THREAD_SIZE_ORDER (0) +#elif defined(CONFIG_PAGE_SIZE_4KB) +#define THREAD_SIZE_ORDER (1) +#elif defined(CONFIG_PAGE_SIZE_8KB) +#define THREAD_SIZE_ORDER (1) +#elif defined(CONFIG_PAGE_SIZE_16KB) +#define THREAD_SIZE_ORDER (0) +#elif defined(CONFIG_PAGE_SIZE_64KB) +#define THREAD_SIZE_ORDER (0) +#else +#error "Unknown thread size" +#endif + +#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) +#define STACK_WARN (THREAD_SIZE >> 3) + +/* + * macros/functions for gaining access to the thread information structure + */ +#ifndef __ASSEMBLY__ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* how to get the current stack pointer from C */ +register unsigned long current_stack_pointer asm("r15") __used; + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; +#if defined(CONFIG_SUPERH64) + __asm__ __volatile__ ("getcon cr17, %0" : "=r" (ti)); +#elif defined(CONFIG_CPU_HAS_SR_RB) + __asm__ __volatile__ ("stc r7_bank, %0" : "=r" (ti)); +#else + unsigned long __dummy; + + __asm__ __volatile__ ( + "mov r15, %0\n\t" + "and %1, %0\n\t" + : "=&r" (ti), "=r" (__dummy) + : "1" (~(THREAD_SIZE - 1)) + : "memory"); +#endif + + return ti; +} + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(ti) kzalloc(THREAD_SIZE, GFP_KERNEL) +#else +#define alloc_thread_info(ti) kmalloc(THREAD_SIZE, GFP_KERNEL) +#endif +#define free_thread_info(ti) kfree(ti) + +#endif /* __ASSEMBLY__ */ + +/* + * thread information flags + * - these are process state flags that various assembly files may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_RESTORE_SIGMASK 3 /* restore signal mask in do_signal() */ +#define TIF_SINGLESTEP 4 /* singlestepping active */ +#define TIF_SYSCALL_AUDIT 5 +#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ +#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 18 +#define TIF_FREEZE 19 + +#define _TIF_SYSCALL_TRACE (1< +#include +#include + +struct sys_timer_ops { + int (*init)(void); + int (*start)(void); + int (*stop)(void); + cycle_t (*read)(void); +#ifndef CONFIG_GENERIC_TIME + unsigned long (*get_offset)(void); +#endif +}; + +struct sys_timer { + const char *name; + + struct sys_device dev; + struct sys_timer_ops *ops; +}; + +#define TICK_SIZE (tick_nsec / 1000) + +extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer; +extern struct sys_timer *sys_timer; + +#ifndef CONFIG_GENERIC_TIME +static inline unsigned long get_timer_offset(void) +{ + return sys_timer->ops->get_offset(); +} +#endif + +/* arch/sh/kernel/timers/timer.c */ +struct sys_timer *get_sys_timer(void); + +/* arch/sh/kernel/time.c */ +void handle_timer_tick(void); +extern unsigned long sh_hpt_frequency; + +#endif /* __ASM_SH_TIMER_H */ diff --git a/arch/sh/include/asm/timex.h b/arch/sh/include/asm/timex.h new file mode 100644 index 000000000000..a873e24113cf --- /dev/null +++ b/arch/sh/include/asm/timex.h @@ -0,0 +1,18 @@ +/* + * linux/include/asm-sh/timex.h + * + * sh architecture timex specifications + */ +#ifndef __ASM_SH_TIMEX_H +#define __ASM_SH_TIMEX_H + +#define CLOCK_TICK_RATE (CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */ + +typedef unsigned long long cycles_t; + +static __inline__ cycles_t get_cycles (void) +{ + return 0; +} + +#endif /* __ASM_SH_TIMEX_H */ diff --git a/arch/sh/include/asm/titan.h b/arch/sh/include/asm/titan.h new file mode 100644 index 000000000000..03f3583c8918 --- /dev/null +++ b/arch/sh/include/asm/titan.h @@ -0,0 +1,17 @@ +/* + * Platform defintions for Titan + */ +#ifndef _ASM_SH_TITAN_H +#define _ASM_SH_TITAN_H + +#define __IO_PREFIX titan +#include + +/* IRQ assignments */ +#define TITAN_IRQ_WAN 2 /* eth0 (WAN) */ +#define TITAN_IRQ_LAN 5 /* eth1 (LAN) */ +#define TITAN_IRQ_MPCIA 8 /* mPCI A */ +#define TITAN_IRQ_MPCIB 11 /* mPCI B */ +#define TITAN_IRQ_USB 11 /* USB */ + +#endif /* __ASM_SH_TITAN_H */ diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h new file mode 100644 index 000000000000..88ff1ae8a6b8 --- /dev/null +++ b/arch/sh/include/asm/tlb.h @@ -0,0 +1,27 @@ +#ifndef __ASM_SH_TLB_H +#define __ASM_SH_TLB_H + +#ifdef CONFIG_SUPERH64 +# include "tlb_64.h" +#endif + +#ifndef __ASSEMBLY__ + +#define tlb_start_vma(tlb, vma) \ + flush_cache_range(vma, vma->vm_start, vma->vm_end) + +#define tlb_end_vma(tlb, vma) \ + flush_tlb_range(vma, vma->vm_start, vma->vm_end) + +#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) + +/* + * Flush whole TLBs for MM + */ +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#include +#include + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_TLB_H */ diff --git a/arch/sh/include/asm/tlb_64.h b/arch/sh/include/asm/tlb_64.h new file mode 100644 index 000000000000..0a96f3af69e3 --- /dev/null +++ b/arch/sh/include/asm/tlb_64.h @@ -0,0 +1,77 @@ +/* + * include/asm-sh/tlb_64.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_TLB_64_H +#define __ASM_SH_TLB_64_H + +/* ITLB defines */ +#define ITLB_FIXED 0x00000000 /* First fixed ITLB, see head.S */ +#define ITLB_LAST_VAR_UNRESTRICTED 0x000003F0 /* Last ITLB */ + +/* DTLB defines */ +#define DTLB_FIXED 0x00800000 /* First fixed DTLB, see head.S */ +#define DTLB_LAST_VAR_UNRESTRICTED 0x008003F0 /* Last DTLB */ + +#ifndef __ASSEMBLY__ + +/** + * for_each_dtlb_entry + * + * @tlb: TLB entry + * + * Iterate over free (non-wired) DTLB entries + */ +#define for_each_dtlb_entry(tlb) \ + for (tlb = cpu_data->dtlb.first; \ + tlb <= cpu_data->dtlb.last; \ + tlb += cpu_data->dtlb.step) + +/** + * for_each_itlb_entry + * + * @tlb: TLB entry + * + * Iterate over free (non-wired) ITLB entries + */ +#define for_each_itlb_entry(tlb) \ + for (tlb = cpu_data->itlb.first; \ + tlb <= cpu_data->itlb.last; \ + tlb += cpu_data->itlb.step) + +/** + * __flush_tlb_slot + * + * @slot: Address of TLB slot. + * + * Flushes TLB slot @slot. + */ +static inline void __flush_tlb_slot(unsigned long long slot) +{ + __asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot)); +} + +#ifdef CONFIG_MMU +/* arch/sh64/mm/tlb.c */ +int sh64_tlb_init(void); +unsigned long long sh64_next_free_dtlb_entry(void); +unsigned long long sh64_get_wired_dtlb_entry(void); +int sh64_put_wired_dtlb_entry(unsigned long long entry); +void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr, + unsigned long asid, unsigned long paddr); +void sh64_teardown_tlb_slot(unsigned long long config_addr); +#else +#define sh64_tlb_init() do { } while (0) +#define sh64_next_free_dtlb_entry() (0) +#define sh64_get_wired_dtlb_entry() (0) +#define sh64_put_wired_dtlb_entry(entry) do { } while (0) +#define sh64_setup_tlb_slot(conf, virt, asid, phys) do { } while (0) +#define sh64_teardown_tlb_slot(addr) do { } while (0) +#endif /* CONFIG_MMU */ +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_TLB_64_H */ diff --git a/arch/sh/include/asm/tlbflush.h b/arch/sh/include/asm/tlbflush.h new file mode 100644 index 000000000000..e0ac97221ae6 --- /dev/null +++ b/arch/sh/include/asm/tlbflush.h @@ -0,0 +1,49 @@ +#ifndef __ASM_SH_TLBFLUSH_H +#define __ASM_SH_TLBFLUSH_H + +/* + * TLB flushing: + * + * - flush_tlb_all() flushes all processes TLBs + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + */ +extern void local_flush_tlb_all(void); +extern void local_flush_tlb_mm(struct mm_struct *mm); +extern void local_flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, + unsigned long end); +extern void local_flush_tlb_page(struct vm_area_struct *vma, + unsigned long page); +extern void local_flush_tlb_kernel_range(unsigned long start, + unsigned long end); +extern void local_flush_tlb_one(unsigned long asid, unsigned long page); + +#ifdef CONFIG_SMP + +extern void flush_tlb_all(void); +extern void flush_tlb_mm(struct mm_struct *mm); +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); +extern void flush_tlb_one(unsigned long asid, unsigned long page); + +#else + +#define flush_tlb_all() local_flush_tlb_all() +#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) +#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page) +#define flush_tlb_one(asid, page) local_flush_tlb_one(asid, page) + +#define flush_tlb_range(vma, start, end) \ + local_flush_tlb_range(vma, start, end) + +#define flush_tlb_kernel_range(start, end) \ + local_flush_tlb_kernel_range(start, end) + +#endif /* CONFIG_SMP */ + +#endif /* __ASM_SH_TLBFLUSH_H */ diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h new file mode 100644 index 000000000000..95f0085e098a --- /dev/null +++ b/arch/sh/include/asm/topology.h @@ -0,0 +1,47 @@ +#ifndef _ASM_SH_TOPOLOGY_H +#define _ASM_SH_TOPOLOGY_H + +#ifdef CONFIG_NUMA + +/* sched_domains SD_NODE_INIT for sh machines */ +#define SD_NODE_INIT (struct sched_domain) { \ + .span = CPU_MASK_NONE, \ + .parent = NULL, \ + .child = NULL, \ + .groups = NULL, \ + .min_interval = 8, \ + .max_interval = 32, \ + .busy_factor = 32, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 2, \ + .busy_idx = 3, \ + .idle_idx = 2, \ + .newidle_idx = 2, \ + .wake_idx = 1, \ + .forkexec_idx = 1, \ + .flags = SD_LOAD_BALANCE \ + | SD_BALANCE_FORK \ + | SD_BALANCE_EXEC \ + | SD_SERIALIZE \ + | SD_WAKE_BALANCE, \ + .last_balance = jiffies, \ + .balance_interval = 1, \ + .nr_balance_failed = 0, \ +} + +#define cpu_to_node(cpu) ((void)(cpu),0) +#define parent_node(node) ((void)(node),0) + +#define node_to_cpumask(node) ((void)node, cpu_online_map) +#define node_to_first_cpu(node) ((void)(node),0) + +#define pcibus_to_node(bus) ((void)(bus), -1) +#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ + CPU_MASK_ALL : \ + node_to_cpumask(pcibus_to_node(bus)) \ + ) +#endif + +#include + +#endif /* _ASM_SH_TOPOLOGY_H */ diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h new file mode 100644 index 000000000000..beea4e6f8dfd --- /dev/null +++ b/arch/sh/include/asm/types.h @@ -0,0 +1,35 @@ +#ifndef __ASM_SH_TYPES_H +#define __ASM_SH_TYPES_H + +#include + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +#ifdef CONFIG_SUPERH32 +typedef u16 opcode_t; +#else +typedef u32 opcode_t; +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_TYPES_H */ diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h new file mode 100644 index 000000000000..45c2c9b2993d --- /dev/null +++ b/arch/sh/include/asm/uaccess.h @@ -0,0 +1,256 @@ +#ifndef __ASM_SH_UACCESS_H +#define __ASM_SH_UACCESS_H + +#include +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define __addr_ok(addr) \ + ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) + +/* + * __access_ok: Check if address with size is OK or not. + * + * Uhhuh, this needs 33-bit arithmetic. We have a carry.. + * + * sum := addr + size; carry? --> flag = true; + * if (sum >= addr_limit) flag = true; + */ +#define __access_ok(addr, size) \ + (__addr_ok((addr) + (size))) +#define access_ok(type, addr, size) \ + (__chk_user_ptr(addr), \ + __access_ok((unsigned long __force)(addr), (size))) + +/* + * Uh, these should become the main single-value transfer routines ... + * They automatically use the right size if we just have the right + * pointer type ... + * + * As SuperH uses the same address space for kernel and user data, we + * can just do these as direct assignments. + * + * Careful to not + * (a) re-use the arguments for side effects (sizeof is ok) + * (b) require any knowledge of processes at this stage + */ +#define put_user(x,ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) +#define get_user(x,ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the user has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x,ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) +#define __get_user(x,ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct __user *)(x)) + +#define __get_user_nocheck(x,ptr,size) \ +({ \ + long __gu_err; \ + unsigned long __gu_val; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_check(x,ptr,size) \ +({ \ + long __gu_err = -EFAULT; \ + unsigned long __gu_val = 0; \ + const __typeof__(*(ptr)) *__gu_addr = (ptr); \ + if (likely(access_ok(VERIFY_READ, __gu_addr, (size)))) \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __put_user_nocheck(x,ptr,size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __put_user_size((x), __pu_addr, (size), __pu_err); \ + __pu_err; \ +}) + +#define __put_user_check(x,ptr,size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \ + __put_user_size((x), __pu_addr, (size), \ + __pu_err); \ + __pu_err; \ +}) + +#ifdef CONFIG_SUPERH32 +# include "uaccess_32.h" +#else +# include "uaccess_64.h" +#endif + +/* Generic arbitrary sized copy. */ +/* Return the number of bytes NOT copied */ +__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); + +static __always_inline unsigned long +__copy_from_user(void *to, const void __user *from, unsigned long n) +{ + return __copy_user(to, (__force void *)from, n); +} + +static __always_inline unsigned long __must_check +__copy_to_user(void __user *to, const void *from, unsigned long n) +{ + return __copy_user((__force void *)to, from, n); +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +/* + * Clear the area and return remaining number of bytes + * (on failure. Usually it's 0.) + */ +__kernel_size_t __clear_user(void *addr, __kernel_size_t size); + +#define clear_user(addr,n) \ +({ \ + void __user * __cl_addr = (addr); \ + unsigned long __cl_size = (n); \ + \ + if (__cl_size && access_ok(VERIFY_WRITE, \ + ((unsigned long)(__cl_addr)), __cl_size)) \ + __cl_size = __clear_user(__cl_addr, __cl_size); \ + \ + __cl_size; \ +}) + +/** + * strncpy_from_user: - Copy a NUL terminated string from userspace. + * @dst: Destination address, in kernel space. This buffer must be at + * least @count bytes long. + * @src: Source address, in user space. + * @count: Maximum number of bytes to copy, including the trailing NUL. + * + * Copies a NUL-terminated string from userspace to kernel space. + * + * On success, returns the length of the string (not including the trailing + * NUL). + * + * If access to userspace fails, returns -EFAULT (some data may have been + * copied). + * + * If @count is smaller than the length of the string, copies @count bytes + * and returns @count. + */ +#define strncpy_from_user(dest,src,count) \ +({ \ + unsigned long __sfu_src = (unsigned long)(src); \ + int __sfu_count = (int)(count); \ + long __sfu_res = -EFAULT; \ + \ + if (__access_ok(__sfu_src, __sfu_count)) \ + __sfu_res = __strncpy_from_user((unsigned long)(dest), \ + __sfu_src, __sfu_count); \ + \ + __sfu_res; \ +}) + +static inline unsigned long +copy_from_user(void *to, const void __user *from, unsigned long n) +{ + unsigned long __copy_from = (unsigned long) from; + __kernel_size_t __copy_size = (__kernel_size_t) n; + + if (__copy_size && __access_ok(__copy_from, __copy_size)) + return __copy_user(to, from, __copy_size); + + return __copy_size; +} + +static inline unsigned long +copy_to_user(void __user *to, const void *from, unsigned long n) +{ + unsigned long __copy_to = (unsigned long) to; + __kernel_size_t __copy_size = (__kernel_size_t) n; + + if (__copy_size && __access_ok(__copy_to, __copy_size)) + return __copy_user(to, from, __copy_size); + + return __copy_size; +} + +/** + * strnlen_user: - Get the size of a string in user space. + * @s: The string to measure. + * @n: The maximum valid length + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * If the string is too long, returns a value greater than @n. + */ +static inline long strnlen_user(const char __user *s, long n) +{ + if (!__addr_ok(s)) + return 0; + else + return __strnlen_user(s, n); +} + +/** + * strlen_user: - Get the size of a string in user space. + * @str: The string to measure. + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * + * If there is a limit on the length of a valid string, you may wish to + * consider using strnlen_user() instead. + */ +#define strlen_user(str) strnlen_user(str, ~0UL >> 1) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ +struct exception_table_entry { + unsigned long insn, fixup; +}; + +#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU) +#define ARCH_HAS_SEARCH_EXTABLE +#endif + +int fixup_exception(struct pt_regs *regs); +/* Returns 0 if exception not found and fixup.unit otherwise. */ +unsigned long search_exception_table(unsigned long addr); +const struct exception_table_entry *search_exception_tables(unsigned long addr); + + +#endif /* __ASM_SH_UACCESS_H */ diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h new file mode 100644 index 000000000000..892fd6dea9db --- /dev/null +++ b/arch/sh/include/asm/uaccess_32.h @@ -0,0 +1,249 @@ +/* + * User space memory access functions + * + * Copyright (C) 1999, 2002 Niibe Yutaka + * Copyright (C) 2003 - 2008 Paul Mundt + * + * Based on: + * MIPS implementation version 1.15 by + * Copyright (C) 1996, 1997, 1998 by Ralf Baechle + * and i386 version. + */ +#ifndef __ASM_SH_UACCESS_32_H +#define __ASM_SH_UACCESS_32_H + +#define __get_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: \ + __get_user_asm(x, ptr, retval, "b"); \ + break; \ + case 2: \ + __get_user_asm(x, ptr, retval, "w"); \ + break; \ + case 4: \ + __get_user_asm(x, ptr, retval, "l"); \ + break; \ + default: \ + __get_user_unknown(); \ + break; \ + } \ +} while (0) + +#ifdef CONFIG_MMU +#define __get_user_asm(x, addr, err, insn) \ +({ \ +__asm__ __volatile__( \ + "1:\n\t" \ + "mov." insn " %2, %1\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov #0, %1\n\t" \ + "mov.l 4f, %0\n\t" \ + "jmp @%0\n\t" \ + " mov %3, %0\n\t" \ + ".balign 4\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + :"=&r" (err), "=&r" (x) \ + :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); }) +#else +#define __get_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "mov." insn " %1, %0\n\t" \ + : "=&r" (x) \ + : "m" (__m(addr)) \ + ); \ +} while (0) +#endif /* CONFIG_MMU */ + +extern void __get_user_unknown(void); + +#define __put_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: \ + __put_user_asm(x, ptr, retval, "b"); \ + break; \ + case 2: \ + __put_user_asm(x, ptr, retval, "w"); \ + break; \ + case 4: \ + __put_user_asm((u32)x, ptr, \ + retval, "l"); \ + break; \ + case 8: \ + __put_user_u64(x, ptr, retval); \ + break; \ + default: \ + __put_user_unknown(); \ + } \ +} while (0) + +#ifdef CONFIG_MMU +#define __put_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "1:\n\t" \ + "mov." insn " %1, %2\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov.l 4f, %0\n\t" \ + "jmp @%0\n\t" \ + " mov %3, %0\n\t" \ + ".balign 4\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + : "=&r" (err) \ + : "r" (x), "m" (__m(addr)), "i" (-EFAULT), \ + "0" (err) \ + : "memory" \ + ); \ +} while (0) +#else +#define __put_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "mov." insn " %0, %1\n\t" \ + : /* no outputs */ \ + : "r" (x), "m" (__m(addr)) \ + : "memory" \ + ); \ +} while (0) +#endif /* CONFIG_MMU */ + +#if defined(CONFIG_CPU_LITTLE_ENDIAN) +#define __put_user_u64(val,addr,retval) \ +({ \ +__asm__ __volatile__( \ + "1:\n\t" \ + "mov.l %R1,%2\n\t" \ + "mov.l %S1,%T2\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov.l 4f,%0\n\t" \ + "jmp @%0\n\t" \ + " mov %3,%0\n\t" \ + ".balign 4\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + : "=r" (retval) \ + : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \ + : "memory"); }) +#else +#define __put_user_u64(val,addr,retval) \ +({ \ +__asm__ __volatile__( \ + "1:\n\t" \ + "mov.l %S1,%2\n\t" \ + "mov.l %R1,%T2\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov.l 4f,%0\n\t" \ + "jmp @%0\n\t" \ + " mov %3,%0\n\t" \ + ".balign 4\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + : "=r" (retval) \ + : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \ + : "memory"); }) +#endif + +extern void __put_user_unknown(void); + +static inline int +__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count) +{ + __kernel_size_t res; + unsigned long __dummy, _d, _s, _c; + + __asm__ __volatile__( + "9:\n" + "mov.b @%2+, %1\n\t" + "cmp/eq #0, %1\n\t" + "bt/s 2f\n" + "1:\n" + "mov.b %1, @%3\n\t" + "dt %4\n\t" + "bf/s 9b\n\t" + " add #1, %3\n\t" + "2:\n\t" + "sub %4, %0\n" + "3:\n" + ".section .fixup,\"ax\"\n" + "4:\n\t" + "mov.l 5f, %1\n\t" + "jmp @%1\n\t" + " mov %9, %0\n\t" + ".balign 4\n" + "5: .long 3b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + " .balign 4\n" + " .long 9b,4b\n" + ".previous" + : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c) + : "0" (__count), "2" (__src), "3" (__dest), "4" (__count), + "i" (-EFAULT) + : "memory", "t"); + + return res; +} + +/* + * Return the size of a string (including the ending 0 even when we have + * exceeded the maximum string length). + */ +static inline long __strnlen_user(const char __user *__s, long __n) +{ + unsigned long res; + unsigned long __dummy; + + __asm__ __volatile__( + "1:\t" + "mov.b @(%0,%3), %1\n\t" + "cmp/eq %4, %0\n\t" + "bt/s 2f\n\t" + " add #1, %0\n\t" + "tst %1, %1\n\t" + "bf 1b\n\t" + "2:\n" + ".section .fixup,\"ax\"\n" + "3:\n\t" + "mov.l 4f, %1\n\t" + "jmp @%1\n\t" + " mov #0, %0\n" + ".balign 4\n" + "4: .long 2b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + " .balign 4\n" + " .long 1b,3b\n" + ".previous" + : "=z" (res), "=&r" (__dummy) + : "0" (0), "r" (__s), "r" (__n) + : "t"); + return res; +} + +#endif /* __ASM_SH_UACCESS_32_H */ diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h new file mode 100644 index 000000000000..81b3d515fcb3 --- /dev/null +++ b/arch/sh/include/asm/uaccess_64.h @@ -0,0 +1,79 @@ +#ifndef __ASM_SH_UACCESS_64_H +#define __ASM_SH_UACCESS_64_H + +/* + * include/asm-sh/uaccess_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003, 2004 Paul Mundt + * + * User space memory access functions + * + * Copyright (C) 1999 Niibe Yutaka + * + * Based on: + * MIPS implementation version 1.15 by + * Copyright (C) 1996, 1997, 1998 by Ralf Baechle + * and i386 version. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#define __get_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: \ + retval = __get_user_asm_b(x, ptr); \ + break; \ + case 2: \ + retval = __get_user_asm_w(x, ptr); \ + break; \ + case 4: \ + retval = __get_user_asm_l(x, ptr); \ + break; \ + case 8: \ + retval = __get_user_asm_q(x, ptr); \ + break; \ + default: \ + __get_user_unknown(); \ + break; \ + } \ +} while (0) + +extern long __get_user_asm_b(void *, long); +extern long __get_user_asm_w(void *, long); +extern long __get_user_asm_l(void *, long); +extern long __get_user_asm_q(void *, long); +extern void __get_user_unknown(void); + +#define __put_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: \ + retval = __put_user_asm_b(x, ptr); \ + break; \ + case 2: \ + retval = __put_user_asm_w(x, ptr); \ + break; \ + case 4: \ + retval = __put_user_asm_l(x, ptr); \ + break; \ + case 8: \ + retval = __put_user_asm_q(x, ptr); \ + break; \ + default: \ + __put_user_unknown(); \ + } \ +} while (0) + +extern long __put_user_asm_b(void *, long); +extern long __put_user_asm_w(void *, long); +extern long __put_user_asm_l(void *, long); +extern long __put_user_asm_q(void *, long); +extern void __put_user_unknown(void); + +#endif /* __ASM_SH_UACCESS_64_H */ diff --git a/arch/sh/include/asm/ubc.h b/arch/sh/include/asm/ubc.h new file mode 100644 index 000000000000..a7b9028bbfbb --- /dev/null +++ b/arch/sh/include/asm/ubc.h @@ -0,0 +1,64 @@ +/* + * include/asm-sh/ubc.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_UBC_H +#define __ASM_SH_UBC_H +#ifdef __KERNEL__ + +#include + +/* User Break Controller */ +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) +#define UBC_TYPE_SH7729 (current_cpu_data.type == CPU_SH7729) +#else +#define UBC_TYPE_SH7729 0 +#endif + +#define BAMR_ASID (1 << 2) +#define BAMR_NONE 0 +#define BAMR_10 0x1 +#define BAMR_12 0x2 +#define BAMR_ALL 0x3 +#define BAMR_16 0x8 +#define BAMR_20 0x9 + +#define BBR_INST (1 << 4) +#define BBR_DATA (2 << 4) +#define BBR_READ (1 << 2) +#define BBR_WRITE (2 << 2) +#define BBR_BYTE 0x1 +#define BBR_HALF 0x2 +#define BBR_LONG 0x3 +#define BBR_QUAD (1 << 6) /* SH7750 */ +#define BBR_CPU (1 << 6) /* SH7709A,SH7729 */ +#define BBR_DMA (2 << 6) /* SH7709A,SH7729 */ + +#define BRCR_CMFA (1 << 15) +#define BRCR_CMFB (1 << 14) +#define BRCR_PCTE (1 << 11) +#define BRCR_PCBA (1 << 10) /* 1: after execution */ +#define BRCR_DBEB (1 << 7) +#define BRCR_PCBB (1 << 6) +#define BRCR_SEQ (1 << 3) +#define BRCR_UBDE (1 << 0) + +#ifndef __ASSEMBLY__ +/* arch/sh/kernel/cpu/ubc.S */ +extern void ubc_sleep(void); + +#ifdef CONFIG_UBC_WAKEUP +extern void ubc_wakeup(void); +#else +#define ubc_wakeup() do { } while (0) +#endif +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_UBC_H */ diff --git a/arch/sh/include/asm/ucontext.h b/arch/sh/include/asm/ucontext.h new file mode 100644 index 000000000000..202ef1d5a3c4 --- /dev/null +++ b/arch/sh/include/asm/ucontext.h @@ -0,0 +1,12 @@ +#ifndef __ASM_SH_UCONTEXT_H +#define __ASM_SH_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* __ASM_SH_UCONTEXT_H */ diff --git a/arch/sh/include/asm/unaligned.h b/arch/sh/include/asm/unaligned.h new file mode 100644 index 000000000000..c1641a01d50f --- /dev/null +++ b/arch/sh/include/asm/unaligned.h @@ -0,0 +1,19 @@ +#ifndef _ASM_SH_UNALIGNED_H +#define _ASM_SH_UNALIGNED_H + +/* SH can't handle unaligned accesses. */ +#ifdef __LITTLE_ENDIAN__ +# include +# include +# include +# define get_unaligned __get_unaligned_le +# define put_unaligned __put_unaligned_le +#else +# include +# include +# include +# define get_unaligned __get_unaligned_be +# define put_unaligned __put_unaligned_be +#endif + +#endif /* _ASM_SH_UNALIGNED_H */ diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h new file mode 100644 index 000000000000..65be656ead7d --- /dev/null +++ b/arch/sh/include/asm/unistd.h @@ -0,0 +1,13 @@ +#ifdef __KERNEL__ +# ifdef CONFIG_SUPERH32 +# include "unistd_32.h" +# else +# include "unistd_64.h" +# endif +#else +# ifdef __SH5__ +# include "unistd_64.h" +# else +# include "unistd_32.h" +# endif +#endif diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h new file mode 100644 index 000000000000..d52c000cf924 --- /dev/null +++ b/arch/sh/include/asm/unistd_32.h @@ -0,0 +1,384 @@ +#ifndef __ASM_SH_UNISTD_H +#define __ASM_SH_UNISTD_H + +/* + * Copyright (C) 1999 Niibe Yutaka + */ + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86old 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_vm86 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_streams1 188 /* some people actually want it */ +#define __NR_streams2 189 /* some people actually want it */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 +#define __NR_getdents64 220 +#define __NR_fcntl64 221 +/* 223 is unused */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 +#define __NR_set_thread_area 243 +#define __NR_get_thread_area 244 +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 +#define __NR_fadvise64 250 + +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_epoll_create 254 +#define __NR_epoll_ctl 255 +#define __NR_epoll_wait 256 +#define __NR_remap_file_pages 257 +#define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 268 +#define __NR_fstatfs64 269 +#define __NR_tgkill 270 +#define __NR_utimes 271 +#define __NR_fadvise64_64 272 +#define __NR_vserver 273 +#define __NR_mbind 274 +#define __NR_get_mempolicy 275 +#define __NR_set_mempolicy 276 +#define __NR_mq_open 277 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 283 +#define __NR_waitid 284 +#define __NR_add_key 285 +#define __NR_request_key 286 +#define __NR_keyctl 287 +#define __NR_ioprio_set 288 +#define __NR_ioprio_get 289 +#define __NR_inotify_init 290 +#define __NR_inotify_add_watch 291 +#define __NR_inotify_rm_watch 292 +/* 293 is unused */ +#define __NR_migrate_pages 294 +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 +#define __NR_set_robust_list 311 +#define __NR_get_robust_list 312 +#define __NR_splice 313 +#define __NR_sync_file_range 314 +#define __NR_tee 315 +#define __NR_vmsplice 316 +#define __NR_move_pages 317 +#define __NR_getcpu 318 +#define __NR_epoll_pwait 319 +#define __NR_utimensat 320 +#define __NR_signalfd 321 +#define __NR_timerfd_create 322 +#define __NR_eventfd 323 +#define __NR_fallocate 324 +#define __NR_timerfd_settime 325 +#define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 + +#define NR_syscalls 333 + +#ifdef __KERNEL__ + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#ifndef cond_syscall +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_UNISTD_H */ diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h new file mode 100644 index 000000000000..7c54e91753c1 --- /dev/null +++ b/arch/sh/include/asm/unistd_64.h @@ -0,0 +1,423 @@ +#ifndef __ASM_SH_UNISTD_64_H +#define __ASM_SH_UNISTD_64_H + +/* + * include/asm-sh/unistd_64.h + * + * This file contains the system call numbers. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 - 2007 Paul Mundt + * Copyright (C) 2004 Sean McGoogan + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 /* old implementation of socket systemcall */ +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86old 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_vm86 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_streams1 188 /* some people actually want it */ +#define __NR_streams2 189 /* some people actually want it */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 + +/* Non-multiplexed socket family */ +#define __NR_socket 220 +#define __NR_bind 221 +#define __NR_connect 222 +#define __NR_listen 223 +#define __NR_accept 224 +#define __NR_getsockname 225 +#define __NR_getpeername 226 +#define __NR_socketpair 227 +#define __NR_send 228 +#define __NR_sendto 229 +#define __NR_recv 230 +#define __NR_recvfrom 231 +#define __NR_shutdown 232 +#define __NR_setsockopt 233 +#define __NR_getsockopt 234 +#define __NR_sendmsg 235 +#define __NR_recvmsg 236 + +/* Non-multiplexed IPC family */ +#define __NR_semop 237 +#define __NR_semget 238 +#define __NR_semctl 239 +#define __NR_msgsnd 240 +#define __NR_msgrcv 241 +#define __NR_msgget 242 +#define __NR_msgctl 243 +#if 0 +#define __NR_shmatcall 244 +#endif +#define __NR_shmdt 245 +#define __NR_shmget 246 +#define __NR_shmctl 247 + +#define __NR_getdents64 248 +#define __NR_fcntl64 249 +/* 223 is unused */ +#define __NR_gettid 252 +#define __NR_readahead 253 +#define __NR_setxattr 254 +#define __NR_lsetxattr 255 +#define __NR_fsetxattr 256 +#define __NR_getxattr 257 +#define __NR_lgetxattr 258 +#define __NR_fgetxattr 269 +#define __NR_listxattr 260 +#define __NR_llistxattr 261 +#define __NR_flistxattr 262 +#define __NR_removexattr 263 +#define __NR_lremovexattr 264 +#define __NR_fremovexattr 265 +#define __NR_tkill 266 +#define __NR_sendfile64 267 +#define __NR_futex 268 +#define __NR_sched_setaffinity 269 +#define __NR_sched_getaffinity 270 +#define __NR_set_thread_area 271 +#define __NR_get_thread_area 272 +#define __NR_io_setup 273 +#define __NR_io_destroy 274 +#define __NR_io_getevents 275 +#define __NR_io_submit 276 +#define __NR_io_cancel 277 +#define __NR_fadvise64 278 +#define __NR_exit_group 280 + +#define __NR_lookup_dcookie 281 +#define __NR_epoll_create 282 +#define __NR_epoll_ctl 283 +#define __NR_epoll_wait 284 +#define __NR_remap_file_pages 285 +#define __NR_set_tid_address 286 +#define __NR_timer_create 287 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 296 +#define __NR_fstatfs64 297 +#define __NR_tgkill 298 +#define __NR_utimes 299 +#define __NR_fadvise64_64 300 +#define __NR_vserver 301 +#define __NR_mbind 302 +#define __NR_get_mempolicy 303 +#define __NR_set_mempolicy 304 +#define __NR_mq_open 305 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 311 +#define __NR_waitid 312 +#define __NR_add_key 313 +#define __NR_request_key 314 +#define __NR_keyctl 315 +#define __NR_ioprio_set 316 +#define __NR_ioprio_get 317 +#define __NR_inotify_init 318 +#define __NR_inotify_add_watch 319 +#define __NR_inotify_rm_watch 320 +/* 321 is unused */ +#define __NR_migrate_pages 322 +#define __NR_openat 323 +#define __NR_mkdirat 324 +#define __NR_mknodat 325 +#define __NR_fchownat 326 +#define __NR_futimesat 327 +#define __NR_fstatat64 328 +#define __NR_unlinkat 329 +#define __NR_renameat 330 +#define __NR_linkat 331 +#define __NR_symlinkat 332 +#define __NR_readlinkat 333 +#define __NR_fchmodat 334 +#define __NR_faccessat 335 +#define __NR_pselect6 336 +#define __NR_ppoll 337 +#define __NR_unshare 338 +#define __NR_set_robust_list 339 +#define __NR_get_robust_list 340 +#define __NR_splice 341 +#define __NR_sync_file_range 342 +#define __NR_tee 343 +#define __NR_vmsplice 344 +#define __NR_move_pages 345 +#define __NR_getcpu 346 +#define __NR_epoll_pwait 347 +#define __NR_utimensat 348 +#define __NR_signalfd 349 +#define __NR_timerfd_create 350 +#define __NR_eventfd 351 +#define __NR_fallocate 352 +#define __NR_timerfd_settime 353 +#define __NR_timerfd_gettime 354 +#define __NR_signalfd4 355 +#define __NR_eventfd2 356 +#define __NR_epoll_create1 357 +#define __NR_dup3 358 +#define __NR_pipe2 359 +#define __NR_inotify_init1 360 + +#ifdef __KERNEL__ + +#define NR_syscalls 361 + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#ifndef cond_syscall +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_UNISTD_64_H */ diff --git a/arch/sh/include/asm/user.h b/arch/sh/include/asm/user.h new file mode 100644 index 000000000000..8fd3cf6c58d4 --- /dev/null +++ b/arch/sh/include/asm/user.h @@ -0,0 +1,67 @@ +#ifndef __ASM_SH_USER_H +#define __ASM_SH_USER_H + +#include +#include + +/* + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd). The file contents are as follows: + * + * upage: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page long. + * data: The data segment follows next. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * stack: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these in order to be able + * to write an integer number of pages. + */ + +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) +struct user_fpu_struct { + unsigned long fp_regs[32]; + unsigned int fpscr; +}; +#else +struct user_fpu_struct { + unsigned long fp_regs[16]; + unsigned long xfp_regs[16]; + unsigned long fpscr; + unsigned long fpul; +}; +#endif + +struct user { + struct pt_regs regs; /* entire machine state */ + struct user_fpu_struct fpu; /* Math Co-processor registers */ + int u_fpvalid; /* True if math co-processor being used */ + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + unsigned long u_ar0; /* help gdb find registers */ + struct user_fpu_struct* u_fpstate; /* Math Co-processor pointer */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* __ASM_SH_USER_H */ diff --git a/arch/sh/include/asm/vga.h b/arch/sh/include/asm/vga.h new file mode 100644 index 000000000000..06a5de8ace1a --- /dev/null +++ b/arch/sh/include/asm/vga.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_VGA_H +#define __ASM_SH_VGA_H + +/* Stupid drivers. */ + +#endif /* __ASM_SH_VGA_H */ diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h new file mode 100644 index 000000000000..f024fed00a72 --- /dev/null +++ b/arch/sh/include/asm/watchdog.h @@ -0,0 +1,107 @@ +/* + * include/asm-sh/watchdog.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __ASM_SH_WATCHDOG_H +#define __ASM_SH_WATCHDOG_H +#ifdef __KERNEL__ + +#include +#include +#include + +/* + * See cpu-sh2/watchdog.h for explanation of this stupidity.. + */ +#ifndef WTCNT_R +# define WTCNT_R WTCNT +#endif + +#ifndef WTCSR_R +# define WTCSR_R WTCSR +#endif + +#define WTCNT_HIGH 0x5a +#define WTCSR_HIGH 0xa5 + +#define WTCSR_CKS2 0x04 +#define WTCSR_CKS1 0x02 +#define WTCSR_CKS0 0x01 + +/* + * CKS0-2 supports a number of clock division ratios. At the time the watchdog + * is enabled, it defaults to a 41 usec overflow period .. we overload this to + * something a little more reasonable, and really can't deal with anything + * lower than WTCSR_CKS_1024, else we drop back into the usec range. + * + * Clock Division Ratio Overflow Period + * -------------------------------------------- + * 1/32 (initial value) 41 usecs + * 1/64 82 usecs + * 1/128 164 usecs + * 1/256 328 usecs + * 1/512 656 usecs + * 1/1024 1.31 msecs + * 1/2048 2.62 msecs + * 1/4096 5.25 msecs + */ +#define WTCSR_CKS_32 0x00 +#define WTCSR_CKS_64 0x01 +#define WTCSR_CKS_128 0x02 +#define WTCSR_CKS_256 0x03 +#define WTCSR_CKS_512 0x04 +#define WTCSR_CKS_1024 0x05 +#define WTCSR_CKS_2048 0x06 +#define WTCSR_CKS_4096 0x07 + +/** + * sh_wdt_read_cnt - Read from Counter + * Reads back the WTCNT value. + */ +static inline __u8 sh_wdt_read_cnt(void) +{ + return ctrl_inb(WTCNT_R); +} + +/** + * sh_wdt_write_cnt - Write to Counter + * @val: Value to write + * + * Writes the given value @val to the lower byte of the timer counter. + * The upper byte is set manually on each write. + */ +static inline void sh_wdt_write_cnt(__u8 val) +{ + ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT); +} + +/** + * sh_wdt_read_csr - Read from Control/Status Register + * + * Reads back the WTCSR value. + */ +static inline __u8 sh_wdt_read_csr(void) +{ + return ctrl_inb(WTCSR_R); +} + +/** + * sh_wdt_write_csr - Write to Control/Status Register + * @val: Value to write + * + * Writes the given value @val to the lower byte of the control/status + * register. The upper byte is set manually on each write. + */ +static inline void sh_wdt_write_csr(__u8 val) +{ + ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR); +} + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_WATCHDOG_H */ diff --git a/arch/sh/include/asm/xor.h b/arch/sh/include/asm/xor.h new file mode 100644 index 000000000000..c82eb12a5b18 --- /dev/null +++ b/arch/sh/include/asm/xor.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/cpu-sh2/cpu/addrspace.h b/arch/sh/include/cpu-sh2/cpu/addrspace.h new file mode 100644 index 000000000000..2b9ab93efa4e --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/addrspace.h @@ -0,0 +1,19 @@ +/* + * Definitions for the address spaces of the SH-2 CPUs. + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_ADDRSPACE_H +#define __ASM_CPU_SH2_ADDRSPACE_H + +#define P0SEG 0x00000000 +#define P1SEG 0x80000000 +#define P2SEG 0xa0000000 +#define P3SEG 0xc0000000 +#define P4SEG 0xe0000000 + +#endif /* __ASM_CPU_SH2_ADDRSPACE_H */ diff --git a/arch/sh/include/cpu-sh2/cpu/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h new file mode 100644 index 000000000000..4e0b16500686 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/cache.h @@ -0,0 +1,41 @@ +/* + * include/asm-sh/cpu-sh2/cache.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_CACHE_H +#define __ASM_CPU_SH2_CACHE_H + +#define L1_CACHE_SHIFT 4 + +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + +#if defined(CONFIG_CPU_SUBTYPE_SH7619) +#define CCR 0xffffffec + +#define CCR_CACHE_CE 0x01 /* Cache enable */ +#define CCR_CACHE_WT 0x06 /* CCR[bit1=1,bit2=1] */ + /* 0x00000000-0x7fffffff: Write-through */ + /* 0x80000000-0x9fffffff: Write-back */ + /* 0xc0000000-0xdfffffff: Write-through */ +#define CCR_CACHE_CB 0x00 /* CCR[bit1=0,bit2=0] */ + /* 0x00000000-0x7fffffff: Write-back */ + /* 0x80000000-0x9fffffff: Write-through */ + /* 0xc0000000-0xdfffffff: Write-back */ +#define CCR_CACHE_CF 0x08 /* Cache invalidate */ + +#define CACHE_OC_ADDRESS_ARRAY 0xf0000000 +#define CACHE_OC_DATA_ARRAY 0xf1000000 + +#define CCR_CACHE_ENABLE CCR_CACHE_CE +#define CCR_CACHE_INVALIDATE CCR_CACHE_CF +#endif + +#endif /* __ASM_CPU_SH2_CACHE_H */ diff --git a/arch/sh/include/cpu-sh2/cpu/cacheflush.h b/arch/sh/include/cpu-sh2/cpu/cacheflush.h new file mode 100644 index 000000000000..2979efb26de3 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/cacheflush.h @@ -0,0 +1,44 @@ +/* + * include/asm-sh/cpu-sh2/cacheflush.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_CACHEFLUSH_H +#define __ASM_CPU_SH2_CACHEFLUSH_H + +/* + * Cache flushing: + * + * - flush_cache_all() flushes entire cache + * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking + * - flush_cache_page(mm, vmaddr, pfn) flushes a single page + * - flush_cache_range(vma, start, end) flushes a range of pages + * + * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache + * - flush_icache_range(start, end) flushes(invalidates) a range for icache + * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache + * + * Caches are indexed (effectively) by physical address on SH-2, so + * we don't need them. + */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_sigtramp(vaddr) do { } while (0) + +#define p3_cache_init() do { } while (0) +#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */ + diff --git a/arch/sh/include/cpu-sh2/cpu/dma.h b/arch/sh/include/cpu-sh2/cpu/dma.h new file mode 100644 index 000000000000..d66b43cdc637 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/dma.h @@ -0,0 +1,23 @@ +/* + * Definitions for the SH-2 DMAC. + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_DMA_H +#define __ASM_CPU_SH2_DMA_H + +#define SH_MAX_DMA_CHANNELS 2 + +#define SAR ((unsigned long[]){ 0xffffff80, 0xffffff90 }) +#define DAR ((unsigned long[]){ 0xffffff84, 0xffffff94 }) +#define DMATCR ((unsigned long[]){ 0xffffff88, 0xffffff98 }) +#define CHCR ((unsigned long[]){ 0xfffffffc, 0xffffff9c }) + +#define DMAOR 0xffffffb0 + +#endif /* __ASM_CPU_SH2_DMA_H */ + diff --git a/arch/sh/include/cpu-sh2/cpu/freq.h b/arch/sh/include/cpu-sh2/cpu/freq.h new file mode 100644 index 000000000000..31de475da70b --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/freq.h @@ -0,0 +1,18 @@ +/* + * include/asm-sh/cpu-sh2/freq.h + * + * Copyright (C) 2006 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_FREQ_H +#define __ASM_CPU_SH2_FREQ_H + +#if defined(CONFIG_CPU_SUBTYPE_SH7619) +#define FREQCR 0xf815ff80 +#endif + +#endif /* __ASM_CPU_SH2_FREQ_H */ + diff --git a/arch/sh/include/cpu-sh2/cpu/mmu_context.h b/arch/sh/include/cpu-sh2/cpu/mmu_context.h new file mode 100644 index 000000000000..beeb299e01ec --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/mmu_context.h @@ -0,0 +1,16 @@ +/* + * include/asm-sh/cpu-sh2/mmu_context.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H +#define __ASM_CPU_SH2_MMU_CONTEXT_H + +/* No MMU */ + +#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */ + diff --git a/arch/sh/include/cpu-sh2/cpu/rtc.h b/arch/sh/include/cpu-sh2/cpu/rtc.h new file mode 100644 index 000000000000..39e2d6e94782 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH2_RTC_H +#define __ASM_SH_CPU_SH2_RTC_H + +#define rtc_reg_size sizeof(u16) +#define RTC_BIT_INVERTED 0 +#define RTC_DEF_CAPABILITIES 0UL + +#endif /* __ASM_SH_CPU_SH2_RTC_H */ diff --git a/arch/sh/include/cpu-sh2/cpu/sigcontext.h b/arch/sh/include/cpu-sh2/cpu/sigcontext.h new file mode 100644 index 000000000000..fe5c15dd6e87 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/sigcontext.h @@ -0,0 +1,17 @@ +#ifndef __ASM_CPU_SH2_SIGCONTEXT_H +#define __ASM_CPU_SH2_SIGCONTEXT_H + +struct sigcontext { + unsigned long oldmask; + + /* CPU registers */ + unsigned long sc_regs[16]; + unsigned long sc_pc; + unsigned long sc_pr; + unsigned long sc_sr; + unsigned long sc_gbr; + unsigned long sc_mach; + unsigned long sc_macl; +}; + +#endif /* __ASM_CPU_SH2_SIGCONTEXT_H */ diff --git a/arch/sh/include/cpu-sh2/cpu/timer.h b/arch/sh/include/cpu-sh2/cpu/timer.h new file mode 100644 index 000000000000..a39c241e8195 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/timer.h @@ -0,0 +1,6 @@ +#ifndef __ASM_CPU_SH2_TIMER_H +#define __ASM_CPU_SH2_TIMER_H + +/* Nothing needed yet */ + +#endif /* __ASM_CPU_SH2_TIMER_H */ diff --git a/arch/sh/include/cpu-sh2/cpu/ubc.h b/arch/sh/include/cpu-sh2/cpu/ubc.h new file mode 100644 index 000000000000..ba0e87f19c7a --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/ubc.h @@ -0,0 +1,32 @@ +/* + * include/asm-sh/cpu-sh2/ubc.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_UBC_H +#define __ASM_CPU_SH2_UBC_H + +#define UBC_BARA 0xffffff40 +#define UBC_BAMRA 0xffffff44 +#define UBC_BBRA 0xffffff48 +#define UBC_BARB 0xffffff60 +#define UBC_BAMRB 0xffffff64 +#define UBC_BBRB 0xffffff68 +#define UBC_BDRB 0xffffff70 +#define UBC_BDMRB 0xffffff74 +#define UBC_BRCR 0xffffff78 + +/* + * We don't have any ASID changes to make in the UBC on the SH-2. + * + * Make these purposely invalid to track misuse. + */ +#define UBC_BASRA 0x00000000 +#define UBC_BASRB 0x00000000 + +#endif /* __ASM_CPU_SH2_UBC_H */ + diff --git a/arch/sh/include/cpu-sh2/cpu/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h new file mode 100644 index 000000000000..393161c9c6d0 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/watchdog.h @@ -0,0 +1,69 @@ +/* + * include/asm-sh/cpu-sh2/watchdog.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_WATCHDOG_H +#define __ASM_CPU_SH2_WATCHDOG_H + +/* + * More SH-2 brilliance .. its not good enough that we can't read + * and write the same sizes to WTCNT, now we have to read and write + * with different sizes at different addresses for WTCNT _and_ RSTCSR. + * + * At least on the bright side no one has managed to screw over WTCSR + * in this fashion .. yet. + */ +/* Register definitions */ +#define WTCNT 0xfffffe80 +#define WTCSR 0xfffffe80 +#define RSTCSR 0xfffffe82 + +#define WTCNT_R (WTCNT + 1) +#define RSTCSR_R (RSTCSR + 1) + +/* Bit definitions */ +#define WTCSR_IOVF 0x80 +#define WTCSR_WT 0x40 +#define WTCSR_TME 0x20 +#define WTCSR_RSTS 0x00 + +#define RSTCSR_RSTS 0x20 + +/** + * sh_wdt_read_rstcsr - Read from Reset Control/Status Register + * + * Reads back the RSTCSR value. + */ +static inline __u8 sh_wdt_read_rstcsr(void) +{ + /* + * Same read/write brain-damage as for WTCNT here.. + */ + return ctrl_inb(RSTCSR_R); +} + +/** + * sh_wdt_write_csr - Write to Reset Control/Status Register + * + * @val: Value to write + * + * Writes the given value @val to the lower byte of the control/status + * register. The upper byte is set manually on each write. + */ +static inline void sh_wdt_write_rstcsr(__u8 val) +{ + /* + * Note: Due to the brain-damaged nature of this register, + * we can't presently touch the WOVF bit, since the upper byte + * has to be swapped for this. So just leave it alone.. + */ + ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR); +} + +#endif /* __ASM_CPU_SH2_WATCHDOG_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/addrspace.h b/arch/sh/include/cpu-sh2a/cpu/addrspace.h new file mode 100644 index 000000000000..795ddd6856a3 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/addrspace.h @@ -0,0 +1,10 @@ +#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H +#define __ASM_SH_CPU_SH2A_ADDRSPACE_H + +#define P0SEG 0x00000000 +#define P1SEG 0x00000000 +#define P2SEG 0x20000000 +#define P3SEG 0x00000000 +#define P4SEG 0x80000000 + +#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h new file mode 100644 index 000000000000..afe228b3f493 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/cache.h @@ -0,0 +1,40 @@ +/* + * include/asm-sh/cpu-sh2a/cache.h + * + * Copyright (C) 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2A_CACHE_H +#define __ASM_CPU_SH2A_CACHE_H + +#define L1_CACHE_SHIFT 4 + +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + +#define CCR 0xfffc1000 /* CCR1 */ +#define CCR2 0xfffc1004 + +/* + * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not + * listed here are reserved. + */ +#define CCR_CACHE_CB 0x0000 /* Hack */ +#define CCR_CACHE_OCE 0x0001 +#define CCR_CACHE_WT 0x0002 +#define CCR_CACHE_OCI 0x0008 /* OCF */ +#define CCR_CACHE_ICE 0x0100 +#define CCR_CACHE_ICI 0x0800 /* ICF */ + +#define CACHE_IC_ADDRESS_ARRAY 0xf0000000 +#define CACHE_OC_ADDRESS_ARRAY 0xf0800000 + +#define CCR_CACHE_ENABLE (CCR_CACHE_OCE | CCR_CACHE_ICE) +#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI | CCR_CACHE_ICI) + +#endif /* __ASM_CPU_SH2A_CACHE_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h new file mode 100644 index 000000000000..2979efb26de3 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h @@ -0,0 +1,44 @@ +/* + * include/asm-sh/cpu-sh2/cacheflush.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_CACHEFLUSH_H +#define __ASM_CPU_SH2_CACHEFLUSH_H + +/* + * Cache flushing: + * + * - flush_cache_all() flushes entire cache + * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking + * - flush_cache_page(mm, vmaddr, pfn) flushes a single page + * - flush_cache_range(vma, start, end) flushes a range of pages + * + * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache + * - flush_icache_range(start, end) flushes(invalidates) a range for icache + * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache + * + * Caches are indexed (effectively) by physical address on SH-2, so + * we don't need them. + */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_sigtramp(vaddr) do { } while (0) + +#define p3_cache_init() do { } while (0) +#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/dma.h b/arch/sh/include/cpu-sh2a/cpu/dma.h new file mode 100644 index 000000000000..d66b43cdc637 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/dma.h @@ -0,0 +1,23 @@ +/* + * Definitions for the SH-2 DMAC. + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_DMA_H +#define __ASM_CPU_SH2_DMA_H + +#define SH_MAX_DMA_CHANNELS 2 + +#define SAR ((unsigned long[]){ 0xffffff80, 0xffffff90 }) +#define DAR ((unsigned long[]){ 0xffffff84, 0xffffff94 }) +#define DMATCR ((unsigned long[]){ 0xffffff88, 0xffffff98 }) +#define CHCR ((unsigned long[]){ 0xfffffffc, 0xffffff9c }) + +#define DMAOR 0xffffffb0 + +#endif /* __ASM_CPU_SH2_DMA_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/freq.h b/arch/sh/include/cpu-sh2a/cpu/freq.h new file mode 100644 index 000000000000..830fd43b6cdc --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/freq.h @@ -0,0 +1,16 @@ +/* + * include/asm-sh/cpu-sh2a/freq.h + * + * Copyright (C) 2006 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2A_FREQ_H +#define __ASM_CPU_SH2A_FREQ_H + +#define FREQCR 0xfffe0010 + +#endif /* __ASM_CPU_SH2A_FREQ_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/mmu_context.h b/arch/sh/include/cpu-sh2a/cpu/mmu_context.h new file mode 100644 index 000000000000..beeb299e01ec --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/mmu_context.h @@ -0,0 +1,16 @@ +/* + * include/asm-sh/cpu-sh2/mmu_context.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H +#define __ASM_CPU_SH2_MMU_CONTEXT_H + +/* No MMU */ + +#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/rtc.h b/arch/sh/include/cpu-sh2a/cpu/rtc.h new file mode 100644 index 000000000000..afb511e2bed7 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH2A_RTC_H +#define __ASM_SH_CPU_SH2A_RTC_H + +#define rtc_reg_size sizeof(u16) +#define RTC_BIT_INVERTED 0 +#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR + +#endif /* __ASM_SH_CPU_SH2A_RTC_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/timer.h b/arch/sh/include/cpu-sh2a/cpu/timer.h new file mode 100644 index 000000000000..a39c241e8195 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/timer.h @@ -0,0 +1,6 @@ +#ifndef __ASM_CPU_SH2_TIMER_H +#define __ASM_CPU_SH2_TIMER_H + +/* Nothing needed yet */ + +#endif /* __ASM_CPU_SH2_TIMER_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h new file mode 100644 index 000000000000..ba0e87f19c7a --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/ubc.h @@ -0,0 +1,32 @@ +/* + * include/asm-sh/cpu-sh2/ubc.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_UBC_H +#define __ASM_CPU_SH2_UBC_H + +#define UBC_BARA 0xffffff40 +#define UBC_BAMRA 0xffffff44 +#define UBC_BBRA 0xffffff48 +#define UBC_BARB 0xffffff60 +#define UBC_BAMRB 0xffffff64 +#define UBC_BBRB 0xffffff68 +#define UBC_BDRB 0xffffff70 +#define UBC_BDMRB 0xffffff74 +#define UBC_BRCR 0xffffff78 + +/* + * We don't have any ASID changes to make in the UBC on the SH-2. + * + * Make these purposely invalid to track misuse. + */ +#define UBC_BASRA 0x00000000 +#define UBC_BASRB 0x00000000 + +#endif /* __ASM_CPU_SH2_UBC_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h new file mode 100644 index 000000000000..393161c9c6d0 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/watchdog.h @@ -0,0 +1,69 @@ +/* + * include/asm-sh/cpu-sh2/watchdog.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_WATCHDOG_H +#define __ASM_CPU_SH2_WATCHDOG_H + +/* + * More SH-2 brilliance .. its not good enough that we can't read + * and write the same sizes to WTCNT, now we have to read and write + * with different sizes at different addresses for WTCNT _and_ RSTCSR. + * + * At least on the bright side no one has managed to screw over WTCSR + * in this fashion .. yet. + */ +/* Register definitions */ +#define WTCNT 0xfffffe80 +#define WTCSR 0xfffffe80 +#define RSTCSR 0xfffffe82 + +#define WTCNT_R (WTCNT + 1) +#define RSTCSR_R (RSTCSR + 1) + +/* Bit definitions */ +#define WTCSR_IOVF 0x80 +#define WTCSR_WT 0x40 +#define WTCSR_TME 0x20 +#define WTCSR_RSTS 0x00 + +#define RSTCSR_RSTS 0x20 + +/** + * sh_wdt_read_rstcsr - Read from Reset Control/Status Register + * + * Reads back the RSTCSR value. + */ +static inline __u8 sh_wdt_read_rstcsr(void) +{ + /* + * Same read/write brain-damage as for WTCNT here.. + */ + return ctrl_inb(RSTCSR_R); +} + +/** + * sh_wdt_write_csr - Write to Reset Control/Status Register + * + * @val: Value to write + * + * Writes the given value @val to the lower byte of the control/status + * register. The upper byte is set manually on each write. + */ +static inline void sh_wdt_write_rstcsr(__u8 val) +{ + /* + * Note: Due to the brain-damaged nature of this register, + * we can't presently touch the WOVF bit, since the upper byte + * has to be swapped for this. So just leave it alone.. + */ + ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR); +} + +#endif /* __ASM_CPU_SH2_WATCHDOG_H */ + diff --git a/arch/sh/include/cpu-sh3/cpu/adc.h b/arch/sh/include/cpu-sh3/cpu/adc.h new file mode 100644 index 000000000000..b289e3ca19a6 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/adc.h @@ -0,0 +1,28 @@ +#ifndef __ASM_CPU_SH3_ADC_H +#define __ASM_CPU_SH3_ADC_H + +/* + * Copyright (C) 2004 Andriy Skulysh + */ + + +#define ADDRAH 0xa4000080 +#define ADDRAL 0xa4000082 +#define ADDRBH 0xa4000084 +#define ADDRBL 0xa4000086 +#define ADDRCH 0xa4000088 +#define ADDRCL 0xa400008a +#define ADDRDH 0xa400008c +#define ADDRDL 0xa400008e +#define ADCSR 0xa4000090 + +#define ADCSR_ADF 0x80 +#define ADCSR_ADIE 0x40 +#define ADCSR_ADST 0x20 +#define ADCSR_MULTI 0x10 +#define ADCSR_CKS 0x08 +#define ADCSR_CH_MASK 0x07 + +#define ADCR 0xa4000092 + +#endif /* __ASM_CPU_SH3_ADC_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/addrspace.h b/arch/sh/include/cpu-sh3/cpu/addrspace.h new file mode 100644 index 000000000000..0f94726c7d62 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/addrspace.h @@ -0,0 +1,19 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Kaz Kojima + * + * Defitions for the address spaces of the SH-3 CPUs. + */ +#ifndef __ASM_CPU_SH3_ADDRSPACE_H +#define __ASM_CPU_SH3_ADDRSPACE_H + +#define P0SEG 0x00000000 +#define P1SEG 0x80000000 +#define P2SEG 0xa0000000 +#define P3SEG 0xc0000000 +#define P4SEG 0xe0000000 + +#endif /* __ASM_CPU_SH3_ADDRSPACE_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/cache.h b/arch/sh/include/cpu-sh3/cpu/cache.h new file mode 100644 index 000000000000..bee2d81c56bf --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/cache.h @@ -0,0 +1,43 @@ +/* + * include/asm-sh/cpu-sh3/cache.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_CACHE_H +#define __ASM_CPU_SH3_CACHE_H + +#define L1_CACHE_SHIFT 4 + +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + +#define CCR 0xffffffec /* Address of Cache Control Register */ + +#define CCR_CACHE_CE 0x01 /* Cache Enable */ +#define CCR_CACHE_WT 0x02 /* Write-Through (for P0,U0,P3) (else writeback) */ +#define CCR_CACHE_CB 0x04 /* Write-Back (for P1) (else writethrough) */ +#define CCR_CACHE_CF 0x08 /* Cache Flush */ +#define CCR_CACHE_ORA 0x20 /* RAM mode */ + +#define CACHE_OC_ADDRESS_ARRAY 0xf0000000 +#define CACHE_PHYSADDR_MASK 0x1ffffc00 + +#define CCR_CACHE_ENABLE CCR_CACHE_CE +#define CCR_CACHE_INVALIDATE CCR_CACHE_CF + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) +#define CCR3_REG 0xa40000b4 +#define CCR_CACHE_16KB 0x00010000 +#define CCR_CACHE_32KB 0x00020000 +#endif + +#endif /* __ASM_CPU_SH3_CACHE_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h new file mode 100644 index 000000000000..f70d8ef76a15 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h @@ -0,0 +1,70 @@ +/* + * include/asm-sh/cpu-sh3/cacheflush.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_CACHEFLUSH_H +#define __ASM_CPU_SH3_CACHEFLUSH_H + +/* + * Cache flushing: + * + * - flush_cache_all() flushes entire cache + * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking + * - flush_cache_page(mm, vmaddr, pfn) flushes a single page + * - flush_cache_range(vma, start, end) flushes a range of pages + * + * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache + * - flush_icache_range(start, end) flushes(invalidates) a range for icache + * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache + * + * Caches are indexed (effectively) by physical address on SH-3, so + * we don't need them. + */ + +#if defined(CONFIG_SH7705_CACHE_32KB) + +/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the + * SH4. Unlike the SH4 this is a unified cache so we need to do some work + * in mmap when 'exec'ing a new binary + */ + /* 32KB cache, 4kb PAGE sizes need to check bit 12 */ +#define CACHE_ALIAS 0x00001000 + +#define PG_mapped PG_arch_1 + +void flush_cache_all(void); +void flush_cache_mm(struct mm_struct *mm); +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn); +void flush_dcache_page(struct page *pg); +void flush_icache_range(unsigned long start, unsigned long end); +void flush_icache_page(struct vm_area_struct *vma, struct page *page); +#else +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#endif + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +/* SH3 has unified cache so no special action needed here */ +#define flush_cache_sigtramp(vaddr) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) + +#define p3_cache_init() do { } while (0) + +#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h new file mode 100644 index 000000000000..05fda8316ebc --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/dac.h @@ -0,0 +1,41 @@ +#ifndef __ASM_CPU_SH3_DAC_H +#define __ASM_CPU_SH3_DAC_H + +/* + * Copyright (C) 2003 Andriy Skulysh + */ + + +#define DADR0 0xa40000a0 +#define DADR1 0xa40000a2 +#define DACR 0xa40000a4 +#define DACR_DAOE1 0x80 +#define DACR_DAOE0 0x40 +#define DACR_DAE 0x20 + + +static __inline__ void sh_dac_enable(int channel) +{ + unsigned char v; + v = ctrl_inb(DACR); + if(channel) v |= DACR_DAOE1; + else v |= DACR_DAOE0; + ctrl_outb(v,DACR); +} + +static __inline__ void sh_dac_disable(int channel) +{ + unsigned char v; + v = ctrl_inb(DACR); + if(channel) v &= ~DACR_DAOE1; + else v &= ~DACR_DAOE0; + ctrl_outb(v,DACR); +} + +static __inline__ void sh_dac_output(u8 value, int channel) +{ + if(channel) ctrl_outb(value,DADR1); + else ctrl_outb(value,DADR0); +} + +#endif /* __ASM_CPU_SH3_DAC_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h new file mode 100644 index 000000000000..6813c3220a1d --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/dma.h @@ -0,0 +1,51 @@ +#ifndef __ASM_CPU_SH3_DMA_H +#define __ASM_CPU_SH3_DMA_H + + +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) +#define SH_DMAC_BASE 0xa4010020 +#else +#define SH_DMAC_BASE 0xa4000020 +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709) +#define DMTE0_IRQ 48 +#define DMTE1_IRQ 49 +#define DMTE2_IRQ 50 +#define DMTE3_IRQ 51 +#define DMTE4_IRQ 76 +#define DMTE5_IRQ 77 +#endif + +/* Definitions for the SuperH DMAC */ +#define TM_BURST 0x00000020 +#define TS_8 0x00000000 +#define TS_16 0x00000008 +#define TS_32 0x00000010 +#define TS_128 0x00000018 + +#define CHCR_TS_MASK 0x18 +#define CHCR_TS_SHIFT 3 + +#define DMAOR_INIT DMAOR_DME + +/* + * The SuperH DMAC supports a number of transmit sizes, we list them here, + * with their respective values as they appear in the CHCR registers. + */ +enum { + XMIT_SZ_8BIT, + XMIT_SZ_16BIT, + XMIT_SZ_32BIT, + XMIT_SZ_128BIT, +}; + +static unsigned int ts_shift[] __maybe_unused = { + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + [XMIT_SZ_128BIT] = 4, +}; + +#endif /* __ASM_CPU_SH3_DMA_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/freq.h b/arch/sh/include/cpu-sh3/cpu/freq.h new file mode 100644 index 000000000000..53c62302b2e3 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/freq.h @@ -0,0 +1,27 @@ +/* + * include/asm-sh/cpu-sh3/freq.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_FREQ_H +#define __ASM_CPU_SH3_FREQ_H + +#ifdef CONFIG_CPU_SUBTYPE_SH7712 +#define FRQCR 0xA415FF80 +#else +#define FRQCR 0xffffff80 +#endif + +#define MIN_DIVISOR_NR 0 +#define MAX_DIVISOR_NR 4 + +#define FRQCR_CKOEN 0x0100 +#define FRQCR_PLLEN 0x0080 +#define FRQCR_PSTBY 0x0040 + +#endif /* __ASM_CPU_SH3_FREQ_H */ + diff --git a/arch/sh/include/cpu-sh3/cpu/gpio.h b/arch/sh/include/cpu-sh3/cpu/gpio.h new file mode 100644 index 000000000000..4e53eb314b8f --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/gpio.h @@ -0,0 +1,67 @@ +/* + * include/asm-sh/cpu-sh3/gpio.h + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * Addresses for the Pin Function Controller + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef _CPU_SH3_GPIO_H +#define _CPU_SH3_GPIO_H + +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) + +/* Control registers */ +#define PORT_PACR 0xA4050100UL +#define PORT_PBCR 0xA4050102UL +#define PORT_PCCR 0xA4050104UL +#define PORT_PDCR 0xA4050106UL +#define PORT_PECR 0xA4050108UL +#define PORT_PFCR 0xA405010AUL +#define PORT_PGCR 0xA405010CUL +#define PORT_PHCR 0xA405010EUL +#define PORT_PJCR 0xA4050110UL +#define PORT_PKCR 0xA4050112UL +#define PORT_PLCR 0xA4050114UL +#define PORT_PMCR 0xA4050116UL +#define PORT_PPCR 0xA4050118UL +#define PORT_PRCR 0xA405011AUL +#define PORT_PSCR 0xA405011CUL +#define PORT_PTCR 0xA405011EUL +#define PORT_PUCR 0xA4050120UL +#define PORT_PVCR 0xA4050122UL + +/* Data registers */ +#define PORT_PADR 0xA4050140UL +/* Address of PORT_PBDR is wrong in the datasheet, see errata 2005-09-21 */ +#define PORT_PBDR 0xA4050142UL +#define PORT_PCDR 0xA4050144UL +#define PORT_PDDR 0xA4050146UL +#define PORT_PEDR 0xA4050148UL +#define PORT_PFDR 0xA405014AUL +#define PORT_PGDR 0xA405014CUL +#define PORT_PHDR 0xA405014EUL +#define PORT_PJDR 0xA4050150UL +#define PORT_PKDR 0xA4050152UL +#define PORT_PLDR 0xA4050154UL +#define PORT_PMDR 0xA4050156UL +#define PORT_PPDR 0xA4050158UL +#define PORT_PRDR 0xA405015AUL +#define PORT_PSDR 0xA405015CUL +#define PORT_PTDR 0xA405015EUL +#define PORT_PUDR 0xA4050160UL +#define PORT_PVDR 0xA4050162UL + +/* Pin Select Registers */ +#define PORT_PSELA 0xA4050124UL +#define PORT_PSELB 0xA4050126UL +#define PORT_PSELC 0xA4050128UL +#define PORT_PSELD 0xA405012AUL + +#endif + +#endif diff --git a/arch/sh/include/cpu-sh3/cpu/mmu_context.h b/arch/sh/include/cpu-sh3/cpu/mmu_context.h new file mode 100644 index 000000000000..ab09da73ce77 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/mmu_context.h @@ -0,0 +1,44 @@ +/* + * include/asm-sh/cpu-sh3/mmu_context.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_MMU_CONTEXT_H +#define __ASM_CPU_SH3_MMU_CONTEXT_H + +#define MMU_PTEH 0xFFFFFFF0 /* Page table entry register HIGH */ +#define MMU_PTEL 0xFFFFFFF4 /* Page table entry register LOW */ +#define MMU_TTB 0xFFFFFFF8 /* Translation table base register */ +#define MMU_TEA 0xFFFFFFFC /* TLB Exception Address */ + +#define MMUCR 0xFFFFFFE0 /* MMU Control Register */ + +#define MMU_TLB_ADDRESS_ARRAY 0xF2000000 +#define MMU_PAGE_ASSOC_BIT 0x80 + +#define MMU_NTLB_ENTRIES 128 /* for 7708 */ +#define MMU_NTLB_WAYS 4 +#define MMU_CONTROL_INIT 0x007 /* SV=0, TF=1, IX=1, AT=1 */ + +#define TRA 0xffffffd0 +#define EXPEVT 0xffffffd4 + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7712) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) +#define INTEVT 0xa4000000 /* INTEVTE2(0xa4000000) */ +#else +#define INTEVT 0xffffffd8 +#endif + +#endif /* __ASM_CPU_SH3_MMU_CONTEXT_H */ + diff --git a/arch/sh/include/cpu-sh3/cpu/rtc.h b/arch/sh/include/cpu-sh3/cpu/rtc.h new file mode 100644 index 000000000000..319404aaee37 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH3_RTC_H +#define __ASM_SH_CPU_SH3_RTC_H + +#define rtc_reg_size sizeof(u16) +#define RTC_BIT_INVERTED 0 /* No bug on SH7708, SH7709A */ +#define RTC_DEF_CAPABILITIES 0UL + +#endif /* __ASM_SH_CPU_SH3_RTC_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/sigcontext.h b/arch/sh/include/cpu-sh3/cpu/sigcontext.h new file mode 100644 index 000000000000..17310dc03dcd --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/sigcontext.h @@ -0,0 +1,17 @@ +#ifndef __ASM_CPU_SH3_SIGCONTEXT_H +#define __ASM_CPU_SH3_SIGCONTEXT_H + +struct sigcontext { + unsigned long oldmask; + + /* CPU registers */ + unsigned long sc_regs[16]; + unsigned long sc_pc; + unsigned long sc_pr; + unsigned long sc_sr; + unsigned long sc_gbr; + unsigned long sc_mach; + unsigned long sc_macl; +}; + +#endif /* __ASM_CPU_SH3_SIGCONTEXT_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/timer.h b/arch/sh/include/cpu-sh3/cpu/timer.h new file mode 100644 index 000000000000..793acf12aa08 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/timer.h @@ -0,0 +1,67 @@ +/* + * include/asm-sh/cpu-sh3/timer.h + * + * Copyright (C) 2004 Lineo Solutions, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_TIMER_H +#define __ASM_CPU_SH3_TIMER_H + +/* + * --------------------------------------------------------------------------- + * TMU Common definitions for SH3 processors + * SH7706 + * SH7709S + * SH7727 + * SH7729R + * SH7710 + * SH7720 + * SH7710 + * --------------------------------------------------------------------------- + */ + +#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721) +#define TMU_TOCR 0xfffffe90 /* Byte access */ +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) +#define TMU_012_TSTR 0xa412fe92 /* Byte access */ + +#define TMU0_TCOR 0xa412fe94 /* Long access */ +#define TMU0_TCNT 0xa412fe98 /* Long access */ +#define TMU0_TCR 0xa412fe9c /* Word access */ + +#define TMU1_TCOR 0xa412fea0 /* Long access */ +#define TMU1_TCNT 0xa412fea4 /* Long access */ +#define TMU1_TCR 0xa412fea8 /* Word access */ + +#define TMU2_TCOR 0xa412feac /* Long access */ +#define TMU2_TCNT 0xa412feb0 /* Long access */ +#define TMU2_TCR 0xa412feb4 /* Word access */ + +#else +#define TMU_012_TSTR 0xfffffe92 /* Byte access */ + +#define TMU0_TCOR 0xfffffe94 /* Long access */ +#define TMU0_TCNT 0xfffffe98 /* Long access */ +#define TMU0_TCR 0xfffffe9c /* Word access */ + +#define TMU1_TCOR 0xfffffea0 /* Long access */ +#define TMU1_TCNT 0xfffffea4 /* Long access */ +#define TMU1_TCR 0xfffffea8 /* Word access */ + +#define TMU2_TCOR 0xfffffeac /* Long access */ +#define TMU2_TCNT 0xfffffeb0 /* Long access */ +#define TMU2_TCR 0xfffffeb4 /* Word access */ +#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721) +#define TMU2_TCPR2 0xfffffeb8 /* Long access */ +#endif +#endif + +#endif /* __ASM_CPU_SH3_TIMER_H */ + diff --git a/arch/sh/include/cpu-sh3/cpu/ubc.h b/arch/sh/include/cpu-sh3/cpu/ubc.h new file mode 100644 index 000000000000..4e6381d5ff7a --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/ubc.h @@ -0,0 +1,42 @@ +/* + * include/asm-sh/cpu-sh3/ubc.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_UBC_H +#define __ASM_CPU_SH3_UBC_H + +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) +#define UBC_BARA 0xa4ffffb0 +#define UBC_BAMRA 0xa4ffffb4 +#define UBC_BBRA 0xa4ffffb8 +#define UBC_BASRA 0xffffffe4 +#define UBC_BARB 0xa4ffffa0 +#define UBC_BAMRB 0xa4ffffa4 +#define UBC_BBRB 0xa4ffffa8 +#define UBC_BASRB 0xffffffe8 +#define UBC_BDRB 0xa4ffff90 +#define UBC_BDMRB 0xa4ffff94 +#define UBC_BRCR 0xa4ffff98 +#else +#define UBC_BARA 0xffffffb0 +#define UBC_BAMRA 0xffffffb4 +#define UBC_BBRA 0xffffffb8 +#define UBC_BASRA 0xffffffe4 +#define UBC_BARB 0xffffffa0 +#define UBC_BAMRB 0xffffffa4 +#define UBC_BBRB 0xffffffa8 +#define UBC_BASRB 0xffffffe8 +#define UBC_BDRB 0xffffff90 +#define UBC_BDMRB 0xffffff94 +#define UBC_BRCR 0xffffff98 +#endif + +#endif /* __ASM_CPU_SH3_UBC_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/watchdog.h b/arch/sh/include/cpu-sh3/cpu/watchdog.h new file mode 100644 index 000000000000..4ee0347298d8 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/watchdog.h @@ -0,0 +1,25 @@ +/* + * include/asm-sh/cpu-sh3/watchdog.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_WATCHDOG_H +#define __ASM_CPU_SH3_WATCHDOG_H + +/* Register definitions */ +#define WTCNT 0xffffff84 +#define WTCSR 0xffffff86 + +/* Bit definitions */ +#define WTCSR_TME 0x80 +#define WTCSR_WT 0x40 +#define WTCSR_RSTS 0x20 +#define WTCSR_WOVF 0x10 +#define WTCSR_IOVF 0x08 + +#endif /* __ASM_CPU_SH3_WATCHDOG_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h new file mode 100644 index 000000000000..a3fa733c1c7d --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/addrspace.h @@ -0,0 +1,35 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Kaz Kojima + * + * Defitions for the address spaces of the SH-4 CPUs. + */ +#ifndef __ASM_CPU_SH4_ADDRSPACE_H +#define __ASM_CPU_SH4_ADDRSPACE_H + +#define P0SEG 0x00000000 +#define P1SEG 0x80000000 +#define P2SEG 0xa0000000 +#define P3SEG 0xc0000000 +#define P4SEG 0xe0000000 + +/* Detailed P4SEG */ +#define P4SEG_STORE_QUE (P4SEG) +#define P4SEG_IC_ADDR 0xf0000000 +#define P4SEG_IC_DATA 0xf1000000 +#define P4SEG_ITLB_ADDR 0xf2000000 +#define P4SEG_ITLB_DATA 0xf3000000 +#define P4SEG_OC_ADDR 0xf4000000 +#define P4SEG_OC_DATA 0xf5000000 +#define P4SEG_TLB_ADDR 0xf6000000 +#define P4SEG_TLB_DATA 0xf7000000 +#define P4SEG_REG_BASE 0xff000000 + +#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */ +#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */ + +#endif /* __ASM_CPU_SH4_ADDRSPACE_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h new file mode 100644 index 000000000000..1c61ebf5c8e3 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/cache.h @@ -0,0 +1,42 @@ +/* + * include/asm-sh/cpu-sh4/cache.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_CACHE_H +#define __ASM_CPU_SH4_CACHE_H + +#define L1_CACHE_SHIFT 5 + +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + +#define CCR 0xff00001c /* Address of Cache Control Register */ +#define CCR_CACHE_OCE 0x0001 /* Operand Cache Enable */ +#define CCR_CACHE_WT 0x0002 /* Write-Through (for P0,U0,P3) (else writeback)*/ +#define CCR_CACHE_CB 0x0004 /* Copy-Back (for P1) (else writethrough) */ +#define CCR_CACHE_OCI 0x0008 /* OC Invalidate */ +#define CCR_CACHE_ORA 0x0020 /* OC RAM Mode */ +#define CCR_CACHE_OIX 0x0080 /* OC Index Enable */ +#define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */ +#define CCR_CACHE_ICI 0x0800 /* IC Invalidate */ +#define CCR_CACHE_IIX 0x8000 /* IC Index Enable */ +#ifndef CONFIG_CPU_SH4A +#define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */ +#endif + +/* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */ +#define CCR_CACHE_ENABLE (CCR_CACHE_OCE|CCR_CACHE_ICE) +#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI|CCR_CACHE_ICI) + +#define CACHE_IC_ADDRESS_ARRAY 0xf0000000 +#define CACHE_OC_ADDRESS_ARRAY 0xf4000000 + +#endif /* __ASM_CPU_SH4_CACHE_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h new file mode 100644 index 000000000000..065306d376eb --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h @@ -0,0 +1,43 @@ +/* + * include/asm-sh/cpu-sh4/cacheflush.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_CACHEFLUSH_H +#define __ASM_CPU_SH4_CACHEFLUSH_H + +/* + * Caches are broken on SH-4 (unless we use write-through + * caching; in which case they're only semi-broken), + * so we need them. + */ +void flush_cache_all(void); +void flush_dcache_all(void); +void flush_cache_mm(struct mm_struct *mm); +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, + unsigned long pfn); +void flush_dcache_page(struct page *pg); + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +void flush_icache_range(unsigned long start, unsigned long end); +void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long addr, int len); + +#define flush_icache_page(vma,pg) do { } while (0) + +/* Initialization of P3 area for copy_user_page */ +void p3_cache_init(void); + +#define PG_mapped PG_arch_1 + +#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h new file mode 100644 index 000000000000..71b426a6e482 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h @@ -0,0 +1,39 @@ +#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H +#define __ASM_SH_CPU_SH4_DMA_SH7780_H + +#define REQ_HE 0x000000C0 +#define REQ_H 0x00000080 +#define REQ_LE 0x00000040 +#define TM_BURST 0x0000020 +#define TS_8 0x00000000 +#define TS_16 0x00000008 +#define TS_32 0x00000010 +#define TS_16BLK 0x00000018 +#define TS_32BLK 0x00100000 + +/* + * The SuperH DMAC supports a number of transmit sizes, we list them here, + * with their respective values as they appear in the CHCR registers. + * + * Defaults to a 64-bit transfer size. + */ +enum { + XMIT_SZ_8BIT, + XMIT_SZ_16BIT, + XMIT_SZ_32BIT, + XMIT_SZ_128BIT, + XMIT_SZ_256BIT, +}; + +/* + * The DMA count is defined as the number of bytes to transfer. + */ +static unsigned int ts_shift[] __maybe_unused = { + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + [XMIT_SZ_128BIT] = 4, + [XMIT_SZ_256BIT] = 5, +}; + +#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h new file mode 100644 index 000000000000..235b7cd1fc9a --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/dma.h @@ -0,0 +1,65 @@ +#ifndef __ASM_CPU_SH4_DMA_H +#define __ASM_CPU_SH4_DMA_H + +#define DMAOR_INIT ( 0x8000 | DMAOR_DME ) + +/* SH7751/7760/7780 DMA IRQ sources */ +#define DMTE0_IRQ 34 +#define DMTE1_IRQ 35 +#define DMTE2_IRQ 36 +#define DMTE3_IRQ 37 +#define DMTE4_IRQ 44 +#define DMTE5_IRQ 45 +#define DMTE6_IRQ 46 +#define DMTE7_IRQ 47 +#define DMAE_IRQ 38 + +#ifdef CONFIG_CPU_SH4A +#define SH_DMAC_BASE 0xfc808020 + +#define CHCR_TS_MASK 0x18 +#define CHCR_TS_SHIFT 3 + +#include +#else +#define SH_DMAC_BASE 0xffa00000 + +/* Definitions for the SuperH DMAC */ +#define TM_BURST 0x0000080 +#define TS_8 0x00000010 +#define TS_16 0x00000020 +#define TS_32 0x00000030 +#define TS_64 0x00000000 + +#define CHCR_TS_MASK 0x70 +#define CHCR_TS_SHIFT 4 + +#define DMAOR_COD 0x00000008 + +/* + * The SuperH DMAC supports a number of transmit sizes, we list them here, + * with their respective values as they appear in the CHCR registers. + * + * Defaults to a 64-bit transfer size. + */ +enum { + XMIT_SZ_64BIT, + XMIT_SZ_8BIT, + XMIT_SZ_16BIT, + XMIT_SZ_32BIT, + XMIT_SZ_256BIT, +}; + +/* + * The DMA count is defined as the number of bytes to transfer. + */ +static unsigned int ts_shift[] __maybe_unused = { + [XMIT_SZ_64BIT] = 3, + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + [XMIT_SZ_256BIT] = 5, +}; +#endif + +#endif /* __ASM_CPU_SH4_DMA_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/fpu.h b/arch/sh/include/cpu-sh4/cpu/fpu.h new file mode 100644 index 000000000000..febef7342528 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/fpu.h @@ -0,0 +1,32 @@ +/* + * linux/arch/sh/kernel/cpu/sh4/sh4_fpu.h + * + * Copyright (C) 2006 STMicroelectronics Limited + * Author: Carl Shaw + * + * May be copied or modified under the terms of the GNU General Public + * License Version 2. See linux/COPYING for more information. + * + * Definitions for SH4 FPU operations + */ + +#ifndef __CPU_SH4_FPU_H +#define __CPU_SH4_FPU_H + +#define FPSCR_ENABLE_MASK 0x00000f80UL + +#define FPSCR_FMOV_DOUBLE (1<<1) + +#define FPSCR_CAUSE_INEXACT (1<<12) +#define FPSCR_CAUSE_UNDERFLOW (1<<13) +#define FPSCR_CAUSE_OVERFLOW (1<<14) +#define FPSCR_CAUSE_DIVZERO (1<<15) +#define FPSCR_CAUSE_INVALID (1<<16) +#define FPSCR_CAUSE_ERROR (1<<17) + +#define FPSCR_DBL_PRECISION (1<<19) +#define FPSCR_ROUNDING_MODE(x) ((x >> 20) & 3) +#define FPSCR_RM_NEAREST (0) +#define FPSCR_RM_ZERO (1) + +#endif diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h new file mode 100644 index 000000000000..c23af81c2e70 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/freq.h @@ -0,0 +1,44 @@ +/* + * include/asm-sh/cpu-sh4/freq.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_FREQ_H +#define __ASM_CPU_SH4_FREQ_H + +#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \ + defined(CONFIG_CPU_SUBTYPE_SH7723) || \ + defined(CONFIG_CPU_SUBTYPE_SH7343) || \ + defined(CONFIG_CPU_SUBTYPE_SH7366) +#define FRQCR 0xa4150000 +#define VCLKCR 0xa4150004 +#define SCLKACR 0xa4150008 +#define SCLKBCR 0xa415000c +#define IrDACLKCR 0xa4150010 +#define MSTPCR0 0xa4150030 +#define MSTPCR1 0xa4150034 +#define MSTPCR2 0xa4150038 +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) +#define FRQCR 0xffc80000 +#elif defined(CONFIG_CPU_SUBTYPE_SH7785) +#define FRQCR0 0xffc80000 +#define FRQCR1 0xffc80004 +#define FRQMR1 0xffc80014 +#elif defined(CONFIG_CPU_SUBTYPE_SHX3) +#define FRQCR 0xffc00014 +#else +#define FRQCR 0xffc00000 +#define FRQCR_PSTBY 0x0200 +#define FRQCR_PLLEN 0x0400 +#define FRQCR_CKOEN 0x0800 +#endif +#define MIN_DIVISOR_NR 0 +#define MAX_DIVISOR_NR 3 + +#endif /* __ASM_CPU_SH4_FREQ_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h new file mode 100644 index 000000000000..9ea8eb27b18e --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h @@ -0,0 +1,63 @@ +/* + * include/asm-sh/cpu-sh4/mmu_context.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_MMU_CONTEXT_H +#define __ASM_CPU_SH4_MMU_CONTEXT_H + +#define MMU_PTEH 0xFF000000 /* Page table entry register HIGH */ +#define MMU_PTEL 0xFF000004 /* Page table entry register LOW */ +#define MMU_TTB 0xFF000008 /* Translation table base register */ +#define MMU_TEA 0xFF00000C /* TLB Exception Address */ +#define MMU_PTEA 0xFF000034 /* Page table entry assistance register */ + +#define MMUCR 0xFF000010 /* MMU Control Register */ + +#define MMU_ITLB_ADDRESS_ARRAY 0xF2000000 +#define MMU_UTLB_ADDRESS_ARRAY 0xF6000000 +#define MMU_PAGE_ASSOC_BIT 0x80 + +#define MMUCR_TI (1<<2) + +#ifdef CONFIG_X2TLB +#define MMUCR_ME (1 << 7) +#else +#define MMUCR_ME (0) +#endif + +#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40) +#define MMUCR_SE (1 << 4) +#else +#define MMUCR_SE (0) +#endif + +#ifdef CONFIG_SH_STORE_QUEUES +#define MMUCR_SQMD (1 << 9) +#else +#define MMUCR_SQMD (0) +#endif + +#define MMU_NTLB_ENTRIES 64 +#define MMU_CONTROL_INIT (0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE) + +#define MMU_ITLB_DATA_ARRAY 0xF3000000 +#define MMU_UTLB_DATA_ARRAY 0xF7000000 + +#define MMU_UTLB_ENTRIES 64 +#define MMU_U_ENTRY_SHIFT 8 +#define MMU_UTLB_VALID 0x100 +#define MMU_ITLB_ENTRIES 4 +#define MMU_I_ENTRY_SHIFT 8 +#define MMU_ITLB_VALID 0x100 + +#define TRA 0xff000020 +#define EXPEVT 0xff000024 +#define INTEVT 0xff000028 + +#endif /* __ASM_CPU_SH4_MMU_CONTEXT_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h new file mode 100644 index 000000000000..25b1e6adfe8c --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/rtc.h @@ -0,0 +1,13 @@ +#ifndef __ASM_SH_CPU_SH4_RTC_H +#define __ASM_SH_CPU_SH4_RTC_H + +#ifdef CONFIG_CPU_SUBTYPE_SH7723 +#define rtc_reg_size sizeof(u16) +#else +#define rtc_reg_size sizeof(u32) +#endif + +#define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */ +#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR + +#endif /* __ASM_SH_CPU_SH4_RTC_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/sigcontext.h b/arch/sh/include/cpu-sh4/cpu/sigcontext.h new file mode 100644 index 000000000000..ab392f120e06 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/sigcontext.h @@ -0,0 +1,24 @@ +#ifndef __ASM_CPU_SH4_SIGCONTEXT_H +#define __ASM_CPU_SH4_SIGCONTEXT_H + +struct sigcontext { + unsigned long oldmask; + + /* CPU registers */ + unsigned long sc_regs[16]; + unsigned long sc_pc; + unsigned long sc_pr; + unsigned long sc_sr; + unsigned long sc_gbr; + unsigned long sc_mach; + unsigned long sc_macl; + + /* FPU registers */ + unsigned long sc_fpregs[16]; + unsigned long sc_xfpregs[16]; + unsigned int sc_fpscr; + unsigned int sc_fpul; + unsigned int sc_ownedfp; +}; + +#endif /* __ASM_CPU_SH4_SIGCONTEXT_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h new file mode 100644 index 000000000000..586d6491816a --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/sq.h @@ -0,0 +1,35 @@ +/* + * include/asm-sh/cpu-sh4/sq.h + * + * Copyright (C) 2001, 2002, 2003 Paul Mundt + * Copyright (C) 2001, 2002 M. R. Brown + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_SQ_H +#define __ASM_CPU_SH4_SQ_H + +#include + +/* + * Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be + * mapped to any physical address space. Since data is written (and aligned) + * to 32-byte boundaries, we need to be sure that all allocations are aligned. + */ +#define SQ_SIZE 32 +#define SQ_ALIGN_MASK (~(SQ_SIZE - 1)) +#define SQ_ALIGN(addr) (((addr)+SQ_SIZE-1) & SQ_ALIGN_MASK) + +#define SQ_QACR0 (P4SEG_REG_BASE + 0x38) +#define SQ_QACR1 (P4SEG_REG_BASE + 0x3c) +#define SQ_ADDRMAX (P4SEG_STORE_QUE + 0x04000000) + +/* arch/sh/kernel/cpu/sh4/sq.c */ +unsigned long sq_remap(unsigned long phys, unsigned int size, + const char *name, unsigned long flags); +void sq_unmap(unsigned long vaddr); +void sq_flush_range(unsigned long start, unsigned int len); + +#endif /* __ASM_CPU_SH4_SQ_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/timer.h b/arch/sh/include/cpu-sh4/cpu/timer.h new file mode 100644 index 000000000000..d1e796b96888 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/timer.h @@ -0,0 +1,60 @@ +/* + * include/asm-sh/cpu-sh4/timer.h + * + * Copyright (C) 2004 Lineo Solutions, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_TIMER_H +#define __ASM_CPU_SH4_TIMER_H + +/* + * --------------------------------------------------------------------------- + * TMU Common definitions for SH4 processors + * SH7750S/SH7750R + * SH7751/SH7751R + * SH7760 + * SH-X3 + * --------------------------------------------------------------------------- + */ +#ifdef CONFIG_CPU_SUBTYPE_SHX3 +#define TMU_012_BASE 0xffc10000 +#define TMU_345_BASE 0xffc20000 +#else +#define TMU_012_BASE 0xffd80000 +#define TMU_345_BASE 0xfe100000 +#endif + +#define TMU_TOCR TMU_012_BASE /* Not supported on all CPUs */ + +#define TMU_012_TSTR (TMU_012_BASE + 0x04) +#define TMU_345_TSTR (TMU_345_BASE + 0x04) + +#define TMU0_TCOR (TMU_012_BASE + 0x08) +#define TMU0_TCNT (TMU_012_BASE + 0x0c) +#define TMU0_TCR (TMU_012_BASE + 0x10) + +#define TMU1_TCOR (TMU_012_BASE + 0x14) +#define TMU1_TCNT (TMU_012_BASE + 0x18) +#define TMU1_TCR (TMU_012_BASE + 0x1c) + +#define TMU2_TCOR (TMU_012_BASE + 0x20) +#define TMU2_TCNT (TMU_012_BASE + 0x24) +#define TMU2_TCR (TMU_012_BASE + 0x28) +#define TMU2_TCPR (TMU_012_BASE + 0x2c) + +#define TMU3_TCOR (TMU_345_BASE + 0x08) +#define TMU3_TCNT (TMU_345_BASE + 0x0c) +#define TMU3_TCR (TMU_345_BASE + 0x10) + +#define TMU4_TCOR (TMU_345_BASE + 0x14) +#define TMU4_TCNT (TMU_345_BASE + 0x18) +#define TMU4_TCR (TMU_345_BASE + 0x1c) + +#define TMU5_TCOR (TMU_345_BASE + 0x20) +#define TMU5_TCNT (TMU_345_BASE + 0x24) +#define TMU5_TCR (TMU_345_BASE + 0x28) + +#endif /* __ASM_CPU_SH4_TIMER_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/ubc.h b/arch/sh/include/cpu-sh4/cpu/ubc.h new file mode 100644 index 000000000000..c86e17050935 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/ubc.h @@ -0,0 +1,64 @@ +/* + * include/asm-sh/cpu-sh4/ubc.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_UBC_H +#define __ASM_CPU_SH4_UBC_H + +#if defined(CONFIG_CPU_SH4A) +#define UBC_CBR0 0xff200000 +#define UBC_CRR0 0xff200004 +#define UBC_CAR0 0xff200008 +#define UBC_CAMR0 0xff20000c +#define UBC_CBR1 0xff200020 +#define UBC_CRR1 0xff200024 +#define UBC_CAR1 0xff200028 +#define UBC_CAMR1 0xff20002c +#define UBC_CDR1 0xff200030 +#define UBC_CDMR1 0xff200034 +#define UBC_CETR1 0xff200038 +#define UBC_CCMFR 0xff200600 +#define UBC_CBCR 0xff200620 + +/* CBR */ +#define UBC_CBR_AIE (0x01<<30) +#define UBC_CBR_ID_INST (0x01<<4) +#define UBC_CBR_RW_READ (0x01<<1) +#define UBC_CBR_CE (0x01) + +#define UBC_CBR_AIV_MASK (0x00FF0000) +#define UBC_CBR_AIV_SHIFT (16) +#define UBC_CBR_AIV_SET(asid) (((asid)<| + * +-----------------------------+-----------------+------+----------+------+ + * | | | ways |set index |offset| + * +-----------------------------+-----------------+------+----------+------+ + * ^ 2 bits 8 bits 5 bits + * +- Bit 31 + * + * Cacheline size is based on offset: 5 bits = 32 bytes per line + * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG + * have a broader space for registers. These are outlined by + * CACHE_?C_*_STEP below. + * + */ + +/* Instruction cache */ +#define CACHE_IC_ADDRESS_ARRAY 0x01000000 + +/* Operand Cache */ +#define CACHE_OC_ADDRESS_ARRAY 0x01800000 + +/* These declarations relate to cache 'synonyms' in the operand cache. A + 'synonym' occurs where effective address bits overlap between those used for + indexing the cache sets and those passed to the MMU for translation. In the + case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */ + +#define CACHE_OC_N_SYNBITS 1 /* Number of synonym bits */ +#define CACHE_OC_SYN_SHIFT 12 +/* Mask to select synonym bit(s) */ +#define CACHE_OC_SYN_MASK (((1UL<). +** Assigns symbolic names to control & target registers. +*/ + +/* + * Define some useful aliases for control registers. + */ +#define SR cr0 +#define SSR cr1 +#define PSSR cr2 + /* cr3 UNDEFINED */ +#define INTEVT cr4 +#define EXPEVT cr5 +#define PEXPEVT cr6 +#define TRA cr7 +#define SPC cr8 +#define PSPC cr9 +#define RESVEC cr10 +#define VBR cr11 + /* cr12 UNDEFINED */ +#define TEA cr13 + /* cr14-cr15 UNDEFINED */ +#define DCR cr16 +#define KCR0 cr17 +#define KCR1 cr18 + /* cr19-cr31 UNDEFINED */ + /* cr32-cr61 RESERVED */ +#define CTC cr62 +#define USR cr63 + +/* + * ABI dependent registers (general purpose set) + */ +#define RET r2 +#define ARG1 r2 +#define ARG2 r3 +#define ARG3 r4 +#define ARG4 r5 +#define ARG5 r6 +#define ARG6 r7 +#define SP r15 +#define LINK r18 +#define ZERO r63 + +/* + * Status register defines: used only by assembly sources (and + * syntax independednt) + */ +#define SR_RESET_VAL 0x0000000050008000 +#define SR_HARMLESS 0x00000000500080f0 /* Write ignores for most */ +#define SR_ENABLE_FPU 0xffffffffffff7fff /* AND with this */ + +#if defined (CONFIG_SH64_SR_WATCH) +#define SR_ENABLE_MMU 0x0000000084000000 /* OR with this */ +#else +#define SR_ENABLE_MMU 0x0000000080000000 /* OR with this */ +#endif + +#define SR_UNBLOCK_EXC 0xffffffffefffffff /* AND with this */ +#define SR_BLOCK_EXC 0x0000000010000000 /* OR with this */ + +#else /* Not __ASSEMBLY__ syntax */ + +/* +** Stringify reg. name +*/ +#define __str(x) #x + +/* Stringify control register names for use in inline assembly */ +#define __SR __str(SR) +#define __SSR __str(SSR) +#define __PSSR __str(PSSR) +#define __INTEVT __str(INTEVT) +#define __EXPEVT __str(EXPEVT) +#define __PEXPEVT __str(PEXPEVT) +#define __TRA __str(TRA) +#define __SPC __str(SPC) +#define __PSPC __str(PSPC) +#define __RESVEC __str(RESVEC) +#define __VBR __str(VBR) +#define __TEA __str(TEA) +#define __DCR __str(DCR) +#define __KCR0 __str(KCR0) +#define __KCR1 __str(KCR1) +#define __CTC __str(CTC) +#define __USR __str(USR) + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_CPU_SH5_REGISTERS_H */ diff --git a/arch/sh/include/cpu-sh5/cpu/rtc.h b/arch/sh/include/cpu-sh5/cpu/rtc.h new file mode 100644 index 000000000000..12ea0ed144e1 --- /dev/null +++ b/arch/sh/include/cpu-sh5/cpu/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH5_RTC_H +#define __ASM_SH_CPU_SH5_RTC_H + +#define rtc_reg_size sizeof(u32) +#define RTC_BIT_INVERTED 0 /* The SH-5 RTC is surprisingly sane! */ +#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR + +#endif /* __ASM_SH_CPU_SH5_RTC_H */ diff --git a/arch/sh/include/cpu-sh5/cpu/timer.h b/arch/sh/include/cpu-sh5/cpu/timer.h new file mode 100644 index 000000000000..88da9b341a36 --- /dev/null +++ b/arch/sh/include/cpu-sh5/cpu/timer.h @@ -0,0 +1,4 @@ +#ifndef __ASM_SH_CPU_SH5_TIMER_H +#define __ASM_SH_CPU_SH5_TIMER_H + +#endif /* __ASM_SH_CPU_SH5_TIMER_H */ diff --git a/arch/sh/include/mach-dreamcast/mach/dma.h b/arch/sh/include/mach-dreamcast/mach/dma.h new file mode 100644 index 000000000000..ddd68e788705 --- /dev/null +++ b/arch/sh/include/mach-dreamcast/mach/dma.h @@ -0,0 +1,34 @@ +/* + * include/asm-sh/dreamcast/dma.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_DREAMCAST_DMA_H +#define __ASM_SH_DREAMCAST_DMA_H + +/* Number of DMA channels */ +#define ONCHIP_NR_DMA_CHANNELS 4 +#define G2_NR_DMA_CHANNELS 4 +#define PVR2_NR_DMA_CHANNELS 1 + +/* Channels for cascading */ +#define PVR2_CASCADE_CHAN 2 +#define G2_CASCADE_CHAN 3 + +/* PVR2 DMA Registers */ +#define PVR2_DMA_BASE 0xa05f6800 +#define PVR2_DMA_ADDR (PVR2_DMA_BASE + 0) +#define PVR2_DMA_COUNT (PVR2_DMA_BASE + 4) +#define PVR2_DMA_MODE (PVR2_DMA_BASE + 8) +#define PVR2_DMA_LMMODE0 (PVR2_DMA_BASE + 132) +#define PVR2_DMA_LMMODE1 (PVR2_DMA_BASE + 136) + +/* G2 DMA Register */ +#define G2_DMA_BASE 0xa05f7800 + +#endif /* __ASM_SH_DREAMCAST_DMA_H */ + diff --git a/arch/sh/include/mach-dreamcast/mach/maple.h b/arch/sh/include/mach-dreamcast/mach/maple.h new file mode 100644 index 000000000000..51f6a87f1f11 --- /dev/null +++ b/arch/sh/include/mach-dreamcast/mach/maple.h @@ -0,0 +1,37 @@ +#ifndef __ASM_MAPLE_H +#define __ASM_MAPLE_H + +#define MAPLE_PORTS 4 +#define MAPLE_PNP_INTERVAL HZ +#define MAPLE_MAXPACKETS 8 +#define MAPLE_DMA_ORDER 14 +#define MAPLE_DMA_SIZE (1 << MAPLE_DMA_ORDER) +#define MAPLE_DMA_PAGES ((MAPLE_DMA_ORDER > PAGE_SHIFT) ? \ + MAPLE_DMA_ORDER - PAGE_SHIFT : 0) + +/* Maple Bus registers */ +#define MAPLE_BASE 0xa05f6c00 +#define MAPLE_DMAADDR (MAPLE_BASE+0x04) +#define MAPLE_TRIGTYPE (MAPLE_BASE+0x10) +#define MAPLE_ENABLE (MAPLE_BASE+0x14) +#define MAPLE_STATE (MAPLE_BASE+0x18) +#define MAPLE_SPEED (MAPLE_BASE+0x80) +#define MAPLE_RESET (MAPLE_BASE+0x8c) + +#define MAPLE_MAGIC 0x6155404f +#define MAPLE_2MBPS 0 +#define MAPLE_TIMEOUT(n) ((n)<<15) + +/* Function codes */ +#define MAPLE_FUNC_CONTROLLER 0x001 +#define MAPLE_FUNC_MEMCARD 0x002 +#define MAPLE_FUNC_LCD 0x004 +#define MAPLE_FUNC_CLOCK 0x008 +#define MAPLE_FUNC_MICROPHONE 0x010 +#define MAPLE_FUNC_ARGUN 0x020 +#define MAPLE_FUNC_KEYBOARD 0x040 +#define MAPLE_FUNC_LIGHTGUN 0x080 +#define MAPLE_FUNC_PURUPURU 0x100 +#define MAPLE_FUNC_MOUSE 0x200 + +#endif /* __ASM_MAPLE_H */ diff --git a/arch/sh/include/mach-dreamcast/mach/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h new file mode 100644 index 000000000000..9264ff46c63e --- /dev/null +++ b/arch/sh/include/mach-dreamcast/mach/pci.h @@ -0,0 +1,25 @@ +/* + * include/asm-sh/dreamcast/pci.h + * + * Copyright (C) 2001, 2002 M. R. Brown + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_DREAMCAST_PCI_H +#define __ASM_SH_DREAMCAST_PCI_H + +#include + +#define GAPSPCI_REGS 0x01001400 +#define GAPSPCI_DMA_BASE 0x01840000 +#define GAPSPCI_DMA_SIZE 32768 +#define GAPSPCI_BBA_CONFIG 0x01001600 +#define GAPSPCI_BBA_CONFIG_SIZE 0x2000 + +#define GAPSPCI_IRQ HW_EVENT_EXTERNAL + +#endif /* __ASM_SH_DREAMCAST_PCI_H */ + diff --git a/arch/sh/include/mach-dreamcast/mach/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h new file mode 100644 index 000000000000..f33426608a87 --- /dev/null +++ b/arch/sh/include/mach-dreamcast/mach/sysasic.h @@ -0,0 +1,43 @@ +/* include/asm-sh/dreamcast/sysasic.h + * + * Definitions for the Dreamcast System ASIC and related peripherals. + * + * Copyright (c) 2001 M. R. Brown + * Copyright (C) 2003 Paul Mundt + * + * This file is part of the LinuxDC project (www.linuxdc.org) + * + * Released under the terms of the GNU GPL v2.0. + * + */ +#ifndef __ASM_SH_DREAMCAST_SYSASIC_H +#define __ASM_SH_DREAMCAST_SYSASIC_H + +#include + +/* Hardware events - + + Each of these events correspond to a bit within the Event Mask Registers/ + Event Status Registers. Because of the virtual IRQ numbering scheme, a + base offset must be used when calculating the virtual IRQ that each event + takes. +*/ + +#define HW_EVENT_IRQ_BASE 48 + +/* IRQ 13 */ +#define HW_EVENT_VSYNC (HW_EVENT_IRQ_BASE + 5) /* VSync */ +#define HW_EVENT_MAPLE_DMA (HW_EVENT_IRQ_BASE + 12) /* Maple DMA complete */ +#define HW_EVENT_GDROM_DMA (HW_EVENT_IRQ_BASE + 14) /* GD-ROM DMA complete */ +#define HW_EVENT_G2_DMA (HW_EVENT_IRQ_BASE + 15) /* G2 DMA complete */ +#define HW_EVENT_PVR2_DMA (HW_EVENT_IRQ_BASE + 19) /* PVR2 DMA complete */ + +/* IRQ 11 */ +#define HW_EVENT_GDROM_CMD (HW_EVENT_IRQ_BASE + 32) /* GD-ROM cmd. complete */ +#define HW_EVENT_AICA_SYS (HW_EVENT_IRQ_BASE + 33) /* AICA-related */ +#define HW_EVENT_EXTERNAL (HW_EVENT_IRQ_BASE + 35) /* Ext. (expansion) */ + +#define HW_EVENT_IRQ_MAX (HW_EVENT_IRQ_BASE + 95) + +#endif /* __ASM_SH_DREAMCAST_SYSASIC_H */ + diff --git a/arch/sh/include/mach-landisk/mach/gio.h b/arch/sh/include/mach-landisk/mach/gio.h new file mode 100644 index 000000000000..35d7368b718a --- /dev/null +++ b/arch/sh/include/mach-landisk/mach/gio.h @@ -0,0 +1,37 @@ +#ifndef __ASM_SH_LANDISK_GIO_H +#define __ASM_SH_LANDISK_GIO_H + +#include + +/* version */ +#define VERSION_STR "1.00" + +/* Driver name */ +#define GIO_DRIVER_NAME "/dev/giodrv" + +/* Use 'k' as magic number */ +#define GIODRV_IOC_MAGIC 'k' + +#define GIODRV_IOCRESET _IO(GIODRV_IOC_MAGIC, 0) +/* + * S means "Set" through a ptr, + * T means "Tell" directly + * G means "Get" (to a pointed var) + * Q means "Query", response is on the return value + * X means "eXchange": G and S atomically + * H means "sHift": T and Q atomically + */ +#define GIODRV_IOCSGIODATA1 _IOW(GIODRV_IOC_MAGIC, 1, unsigned char *) +#define GIODRV_IOCGGIODATA1 _IOR(GIODRV_IOC_MAGIC, 2, unsigned char *) +#define GIODRV_IOCSGIODATA2 _IOW(GIODRV_IOC_MAGIC, 3, unsigned short *) +#define GIODRV_IOCGGIODATA2 _IOR(GIODRV_IOC_MAGIC, 4, unsigned short *) +#define GIODRV_IOCSGIODATA4 _IOW(GIODRV_IOC_MAGIC, 5, unsigned long *) +#define GIODRV_IOCGGIODATA4 _IOR(GIODRV_IOC_MAGIC, 6, unsigned long *) +#define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC, 7, unsigned long *) +#define GIODRV_IOCHARDRESET _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */ +#define GIODRV_IOC_MAXNR 8 + +#define GIO_READ 0x00000000 +#define GIO_WRITE 0x00000001 + +#endif /* __ASM_SH_LANDISK_GIO_H */ diff --git a/arch/sh/include/mach-landisk/mach/iodata_landisk.h b/arch/sh/include/mach-landisk/mach/iodata_landisk.h new file mode 100644 index 000000000000..6fb04ab38b9f --- /dev/null +++ b/arch/sh/include/mach-landisk/mach/iodata_landisk.h @@ -0,0 +1,42 @@ +#ifndef __ASM_SH_IODATA_LANDISK_H +#define __ASM_SH_IODATA_LANDISK_H + +/* + * linux/include/asm-sh/landisk/iodata_landisk.h + * + * Copyright (C) 2000 Atom Create Engineering Co., Ltd. + * + * IO-DATA LANDISK support + */ + +/* Box specific addresses. */ + +#define PA_USB 0xa4000000 /* USB Controller M66590 */ + +#define PA_ATARST 0xb0000000 /* ATA/FATA Access Control Register */ +#define PA_LED 0xb0000001 /* LED Control Register */ +#define PA_STATUS 0xb0000002 /* Switch Status Register */ +#define PA_SHUTDOWN 0xb0000003 /* Shutdown Control Register */ +#define PA_PCIPME 0xb0000004 /* PCI PME Status Register */ +#define PA_IMASK 0xb0000005 /* Interrupt Mask Register */ +/* 2003.10.31 I-O DATA NSD NWG add. for shutdown port clear */ +#define PA_PWRINT_CLR 0xb0000006 /* Shutdown Interrupt clear Register */ + +#define PA_PIDE_OFFSET 0x40 /* CF IDE Offset */ +#define PA_SIDE_OFFSET 0x40 /* HDD IDE Offset */ + +#define IRQ_PCIINTA 5 /* PCI INTA IRQ */ +#define IRQ_PCIINTB 6 /* PCI INTB IRQ */ +#define IRQ_PCIINDC 7 /* PCI INTC IRQ */ +#define IRQ_PCIINTD 8 /* PCI INTD IRQ */ +#define IRQ_ATA 9 /* ATA IRQ */ +#define IRQ_FATA 10 /* FATA IRQ */ +#define IRQ_POWER 11 /* Power Switch IRQ */ +#define IRQ_BUTTON 12 /* USL-5P Button IRQ */ +#define IRQ_FAULT 13 /* USL-5P Fault IRQ */ + +#define __IO_PREFIX landisk +#include + +#endif /* __ASM_SH_IODATA_LANDISK_H */ + diff --git a/arch/sh/include/mach-sh03/mach/io.h b/arch/sh/include/mach-sh03/mach/io.h new file mode 100644 index 000000000000..c39c785bba94 --- /dev/null +++ b/arch/sh/include/mach-sh03/mach/io.h @@ -0,0 +1,25 @@ +/* + * include/asm-sh/sh03/io.h + * + * Copyright 2004 Interface Co.,Ltd. Saito.K + * + * IO functions for an Interface CTP/PCI-SH03 + */ + +#ifndef _ASM_SH_IO_SH03_H +#define _ASM_SH_IO_SH03_H + +#include + +#define IRL0_IRQ 2 +#define IRL0_PRIORITY 13 +#define IRL1_IRQ 5 +#define IRL1_PRIORITY 10 +#define IRL2_IRQ 8 +#define IRL2_PRIORITY 7 +#define IRL3_IRQ 11 +#define IRL3_PRIORITY 4 + +void heartbeat_sh03(void); + +#endif /* _ASM_SH_IO_SH03_H */ diff --git a/arch/sh/include/mach-sh03/mach/sh03.h b/arch/sh/include/mach-sh03/mach/sh03.h new file mode 100644 index 000000000000..19c40b80428d --- /dev/null +++ b/arch/sh/include/mach-sh03/mach/sh03.h @@ -0,0 +1,18 @@ +#ifndef __ASM_SH_SH03_H +#define __ASM_SH_SH03_H + +/* + * linux/include/asm-sh/sh03/sh03.h + * + * Copyright (C) 2004 Interface Co., Ltd. Saito.K + * + * Interface CTP/PCI-SH03 support + */ + +#define PA_PCI_IO (0xbe240000) /* PCI I/O space */ +#define PA_PCI_MEM (0xbd000000) /* PCI MEM space */ + +#define PCIPAR (0xa4000cf8) /* PCI Config address */ +#define PCIPDR (0xa4000cfc) /* PCI Config data */ + +#endif /* __ASM_SH_SH03_H */ diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index 79baa47af977..726f0335da76 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include /* diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index ee894e5a45e7..becc54c45692 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S index 47096dc3d206..ab3903eeda5c 100644 --- a/arch/sh/kernel/cpu/sh2a/entry.S +++ b/arch/sh/kernel/cpu/sh2a/entry.S @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 4004073f98cd..3fe482dd05c1 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include ! NOTE: diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index 8020796139f1..2d452f67fb87 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c index 7b2d337ee412..828cb57cb959 100644 --- a/arch/sh/kernel/cpu/sh4/softfloat.c +++ b/arch/sh/kernel/cpu/sh4/softfloat.c @@ -36,7 +36,7 @@ * and Kamel Khelifi */ #include -#include +#include #define LIT64( a ) a##LL diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index 9561b02ade0e..dcdf959a3d44 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include struct sq_mapping; diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index 05372ed6c568..ca08e7f26a3a 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -11,7 +11,7 @@ */ #include #include -#include +#include #include #include #include diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S index f42d4c0feb76..7ccfb995a398 100644 --- a/arch/sh/kernel/head_64.S +++ b/arch/sh/kernel/head_64.S @@ -11,8 +11,8 @@ #include #include #include -#include -#include +#include +#include #include /* diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index a2a99e487e33..64b7690c664c 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include atomic_t irq_err_count; diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c index 022a55f1c1d4..791edabf7d83 100644 --- a/arch/sh/kernel/time_64.c +++ b/arch/sh/kernel/time_64.c @@ -33,8 +33,8 @@ #include #include #include -#include /* required by inline __asm__ stmt. */ -#include +#include /* required by inline __asm__ stmt. */ +#include #include #include #include diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c index ff559e2a96f7..da32ba7b5fcc 100644 --- a/arch/sh/lib64/panic.c +++ b/arch/sh/lib64/panic.c @@ -8,7 +8,7 @@ #include #include -#include +#include /* THIS IS A PHYSICAL ADDRESS */ #define HDSP2534_ADDR (0x04002100) diff --git a/arch/sh/mm/fault_64.c b/arch/sh/mm/fault_64.c index 399d53710d2f..bd63b961b2a9 100644 --- a/arch/sh/mm/fault_64.c +++ b/arch/sh/mm/fault_64.c @@ -39,7 +39,7 @@ #include #include #include -#include +#include /* Callable from fault.c, so not static */ inline void __do_tlb_refill(unsigned long address, diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile index 567516b58acc..b5d202be8206 100644 --- a/arch/sh/tools/Makefile +++ b/arch/sh/tools/Makefile @@ -10,7 +10,7 @@ # Shamelessly cloned from ARM. # -include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types +arch/sh/include/asm/machtypes.h: $(src)/gen-mach-types $(src)/mach-types @echo ' Generating $@' - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi + $(Q)if [ ! -d arch/sh/include/asm ]; then mkdir -p arch/sh/include/asm; fi $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/include/asm-sh/.gitignore b/include/asm-sh/.gitignore deleted file mode 100644 index 9218ef82b698..000000000000 --- a/include/asm-sh/.gitignore +++ /dev/null @@ -1,3 +0,0 @@ -cpu -mach -machtypes.h diff --git a/include/asm-sh/Kbuild b/include/asm-sh/Kbuild deleted file mode 100644 index 43910cdf78a5..000000000000 --- a/include/asm-sh/Kbuild +++ /dev/null @@ -1,8 +0,0 @@ -include include/asm-generic/Kbuild.asm - -header-y += cpu-features.h - -unifdef-y += unistd_32.h -unifdef-y += unistd_64.h -unifdef-y += posix_types_32.h -unifdef-y += posix_types_64.h diff --git a/include/asm-sh/a.out.h b/include/asm-sh/a.out.h deleted file mode 100644 index 1f93130e179c..000000000000 --- a/include/asm-sh/a.out.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_SH_A_OUT_H -#define __ASM_SH_A_OUT_H - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#endif /* __ASM_SH_A_OUT_H */ diff --git a/include/asm-sh/adc.h b/include/asm-sh/adc.h deleted file mode 100644 index 5f85cf74d59d..000000000000 --- a/include/asm-sh/adc.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_ADC_H -#define __ASM_ADC_H -#ifdef __KERNEL__ -/* - * Copyright (C) 2004 Andriy Skulysh - */ - -#include - -int adc_single(unsigned int channel); - -#endif /* __KERNEL__ */ -#endif /* __ASM_ADC_H */ diff --git a/include/asm-sh/addrspace.h b/include/asm-sh/addrspace.h deleted file mode 100644 index fa544fc38c23..000000000000 --- a/include/asm-sh/addrspace.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Kaz Kojima - * - * Defitions for the address spaces of the SH CPUs. - */ -#ifndef __ASM_SH_ADDRSPACE_H -#define __ASM_SH_ADDRSPACE_H - -#ifdef __KERNEL__ - -#include - -/* If this CPU supports segmentation, hook up the helpers */ -#ifdef P1SEG - -/* - [ P0/U0 (virtual) ] 0x00000000 <------ User space - [ P1 (fixed) cached ] 0x80000000 <------ Kernel space - [ P2 (fixed) non-cachable] 0xA0000000 <------ Physical access - [ P3 (virtual) cached] 0xC0000000 <------ vmalloced area - [ P4 control ] 0xE0000000 - */ - -/* Returns the privileged segment base of a given address */ -#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000) - -/* Returns the physical address of a PnSEG (n=1,2) address */ -#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) - -#ifdef CONFIG_29BIT -/* - * Map an address to a certain privileged segment - */ -#define P1SEGADDR(a) \ - ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG)) -#define P2SEGADDR(a) \ - ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG)) -#define P3SEGADDR(a) \ - ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG)) -#define P4SEGADDR(a) \ - ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG)) -#endif /* 29BIT */ -#endif /* P1SEG */ - -/* Check if an address can be reached in 29 bits */ -#define IS_29BIT(a) (((unsigned long)(a)) < 0x20000000) - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_ADDRSPACE_H */ diff --git a/include/asm-sh/atomic-grb.h b/include/asm-sh/atomic-grb.h deleted file mode 100644 index 4c5b7dbfcedb..000000000000 --- a/include/asm-sh/atomic-grb.h +++ /dev/null @@ -1,169 +0,0 @@ -#ifndef __ASM_SH_ATOMIC_GRB_H -#define __ASM_SH_ATOMIC_GRB_H - -static inline void atomic_add(int i, atomic_t *v) -{ - int tmp; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " add %2, %0 \n\t" /* add */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (v) - : "r" (i) - : "memory" , "r0", "r1"); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - int tmp; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " sub %2, %0 \n\t" /* sub */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (v) - : "r" (i) - : "memory" , "r0", "r1"); -} - -static inline int atomic_add_return(int i, atomic_t *v) -{ - int tmp; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " add %2, %0 \n\t" /* add */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (v) - : "r" (i) - : "memory" , "r0", "r1"); - - return tmp; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - int tmp; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " sub %2, %0 \n\t" /* sub */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (v) - : "r" (i) - : "memory", "r0", "r1"); - - return tmp; -} - -static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) -{ - int tmp; - unsigned int _mask = ~mask; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " and %2, %0 \n\t" /* add */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (v) - : "r" (_mask) - : "memory" , "r0", "r1"); -} - -static inline void atomic_set_mask(unsigned int mask, atomic_t *v) -{ - int tmp; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " or %2, %0 \n\t" /* or */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (v) - : "r" (mask) - : "memory" , "r0", "r1"); -} - -static inline int atomic_cmpxchg(atomic_t *v, int old, int new) -{ - int ret; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" - " nop \n\t" - " mov r15, r1 \n\t" - " mov #-8, r15 \n\t" - " mov.l @%1, %0 \n\t" - " cmp/eq %2, %0 \n\t" - " bf 1f \n\t" - " mov.l %3, @%1 \n\t" - "1: mov r1, r15 \n\t" - : "=&r" (ret) - : "r" (v), "r" (old), "r" (new) - : "memory" , "r0", "r1" , "t"); - - return ret; -} - -static inline int atomic_add_unless(atomic_t *v, int a, int u) -{ - int ret; - unsigned long tmp; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" - " nop \n\t" - " mov r15, r1 \n\t" - " mov #-12, r15 \n\t" - " mov.l @%2, %1 \n\t" - " mov %1, %0 \n\t" - " cmp/eq %4, %0 \n\t" - " bt/s 1f \n\t" - " add %3, %1 \n\t" - " mov.l %1, @%2 \n\t" - "1: mov r1, r15 \n\t" - : "=&r" (ret), "=&r" (tmp) - : "r" (v), "r" (a), "r" (u) - : "memory" , "r0", "r1" , "t"); - - return ret != u; -} -#endif /* __ASM_SH_ATOMIC_GRB_H */ diff --git a/include/asm-sh/atomic-irq.h b/include/asm-sh/atomic-irq.h deleted file mode 100644 index 74f7943cff6f..000000000000 --- a/include/asm-sh/atomic-irq.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef __ASM_SH_ATOMIC_IRQ_H -#define __ASM_SH_ATOMIC_IRQ_H - -/* - * To get proper branch prediction for the main line, we must branch - * forward to code at the end of this object's .text section, then - * branch back to restart the operation. - */ -static inline void atomic_add(int i, atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - *(long *)v += i; - local_irq_restore(flags); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - *(long *)v -= i; - local_irq_restore(flags); -} - -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long temp, flags; - - local_irq_save(flags); - temp = *(long *)v; - temp += i; - *(long *)v = temp; - local_irq_restore(flags); - - return temp; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long temp, flags; - - local_irq_save(flags); - temp = *(long *)v; - temp -= i; - *(long *)v = temp; - local_irq_restore(flags); - - return temp; -} - -static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - *(long *)v &= ~mask; - local_irq_restore(flags); -} - -static inline void atomic_set_mask(unsigned int mask, atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - *(long *)v |= mask; - local_irq_restore(flags); -} - -#endif /* __ASM_SH_ATOMIC_IRQ_H */ diff --git a/include/asm-sh/atomic-llsc.h b/include/asm-sh/atomic-llsc.h deleted file mode 100644 index 4b00b78e3f4f..000000000000 --- a/include/asm-sh/atomic-llsc.h +++ /dev/null @@ -1,107 +0,0 @@ -#ifndef __ASM_SH_ATOMIC_LLSC_H -#define __ASM_SH_ATOMIC_LLSC_H - -/* - * To get proper branch prediction for the main line, we must branch - * forward to code at the end of this object's .text section, then - * branch back to restart the operation. - */ -static inline void atomic_add(int i, atomic_t *v) -{ - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_add \n" -" add %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (i), "r" (&v->counter) - : "t"); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_sub \n" -" sub %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (i), "r" (&v->counter) - : "t"); -} - -/* - * SH-4A note: - * - * We basically get atomic_xxx_return() for free compared with - * atomic_xxx(). movli.l/movco.l require r0 due to the instruction - * encoding, so the retval is automatically set without having to - * do any special work. - */ -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long temp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_add_return \n" -" add %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" -" synco \n" - : "=&z" (temp) - : "r" (i), "r" (&v->counter) - : "t"); - - return temp; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long temp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_sub_return \n" -" sub %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" -" synco \n" - : "=&z" (temp) - : "r" (i), "r" (&v->counter) - : "t"); - - return temp; -} - -static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) -{ - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_clear_mask \n" -" and %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (~mask), "r" (&v->counter) - : "t"); -} - -static inline void atomic_set_mask(unsigned int mask, atomic_t *v) -{ - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_set_mask \n" -" or %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (mask), "r" (&v->counter) - : "t"); -} - -#endif /* __ASM_SH_ATOMIC_LLSC_H */ diff --git a/include/asm-sh/atomic.h b/include/asm-sh/atomic.h deleted file mode 100644 index c043ef003028..000000000000 --- a/include/asm-sh/atomic.h +++ /dev/null @@ -1,89 +0,0 @@ -#ifndef __ASM_SH_ATOMIC_H -#define __ASM_SH_ATOMIC_H - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - * - */ - -typedef struct { volatile int counter; } atomic_t; - -#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) - -#define atomic_read(v) ((v)->counter) -#define atomic_set(v,i) ((v)->counter = (i)) - -#include -#include - -#if defined(CONFIG_GUSA_RB) -#include -#elif defined(CONFIG_CPU_SH4A) -#include -#else -#include -#endif - -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) - -#define atomic_dec_return(v) atomic_sub_return(1,(v)) -#define atomic_inc_return(v) atomic_add_return(1,(v)) - -/* - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) - -#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) - -#define atomic_inc(v) atomic_add(1,(v)) -#define atomic_dec(v) atomic_sub(1,(v)) - -#ifndef CONFIG_GUSA_RB -static inline int atomic_cmpxchg(atomic_t *v, int old, int new) -{ - int ret; - unsigned long flags; - - local_irq_save(flags); - ret = v->counter; - if (likely(ret == old)) - v->counter = new; - local_irq_restore(flags); - - return ret; -} - -static inline int atomic_add_unless(atomic_t *v, int a, int u) -{ - int ret; - unsigned long flags; - - local_irq_save(flags); - ret = v->counter; - if (ret != u) - v->counter += a; - local_irq_restore(flags); - - return ret != u; -} -#endif - -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -/* Atomic operations are already serializing on SH */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include -#endif /* __ASM_SH_ATOMIC_H */ diff --git a/include/asm-sh/auxvec.h b/include/asm-sh/auxvec.h deleted file mode 100644 index a6b9d4f4859e..000000000000 --- a/include/asm-sh/auxvec.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef __ASM_SH_AUXVEC_H -#define __ASM_SH_AUXVEC_H - -/* - * Architecture-neutral AT_ values in 0-17, leave some room - * for more of them. - */ - -/* - * This entry gives some information about the FPU initialization - * performed by the kernel. - */ -#define AT_FPUCW 18 /* Used FPU control word. */ - -#ifdef CONFIG_VSYSCALL -/* - * Only define this in the vsyscall case, the entry point to - * the vsyscall page gets placed here. The kernel will attempt - * to build a gate VMA we don't care about otherwise.. - */ -#define AT_SYSINFO_EHDR 33 -#endif - -/* - * More complete cache descriptions than AT_[DIU]CACHEBSIZE. If the - * value is -1, then the cache doesn't exist. Otherwise: - * - * bit 0-3: Cache set-associativity; 0 means fully associative. - * bit 4-7: Log2 of cacheline size. - * bit 8-31: Size of the entire cache >> 8. - */ -#define AT_L1I_CACHESHAPE 34 -#define AT_L1D_CACHESHAPE 35 -#define AT_L2_CACHESHAPE 36 - -#endif /* __ASM_SH_AUXVEC_H */ diff --git a/include/asm-sh/bitops-grb.h b/include/asm-sh/bitops-grb.h deleted file mode 100644 index a5907b94395b..000000000000 --- a/include/asm-sh/bitops-grb.h +++ /dev/null @@ -1,169 +0,0 @@ -#ifndef __ASM_SH_BITOPS_GRB_H -#define __ASM_SH_BITOPS_GRB_H - -static inline void set_bit(int nr, volatile void * addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long tmp; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " or %2, %0 \n\t" /* or */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (a) - : "r" (mask) - : "memory" , "r0", "r1"); -} - -static inline void clear_bit(int nr, volatile void * addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long tmp; - - a += nr >> 5; - mask = ~(1 << (nr & 0x1f)); - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " and %2, %0 \n\t" /* and */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (a) - : "r" (mask) - : "memory" , "r0", "r1"); -} - -static inline void change_bit(int nr, volatile void * addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long tmp; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%1, %0 \n\t" /* load old value */ - " xor %2, %0 \n\t" /* xor */ - " mov.l %0, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "+r" (a) - : "r" (mask) - : "memory" , "r0", "r1"); -} - -static inline int test_and_set_bit(int nr, volatile void * addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long tmp; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-14, r15 \n\t" /* LOGIN: r15 = size */ - " mov.l @%2, %0 \n\t" /* load old value */ - " mov %0, %1 \n\t" - " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ - " mov #-1, %1 \n\t" /* retvat = -1 */ - " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ - " or %3, %0 \n\t" - " mov.l %0, @%2 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "=&r" (retval), - "+r" (a) - : "r" (mask) - : "memory" , "r0", "r1" ,"t"); - - return retval; -} - -static inline int test_and_clear_bit(int nr, volatile void * addr) -{ - int mask, retval,not_mask; - volatile unsigned int *a = addr; - unsigned long tmp; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - - not_mask = ~mask; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-14, r15 \n\t" /* LOGIN */ - " mov.l @%2, %0 \n\t" /* load old value */ - " mov %0, %1 \n\t" /* %1 = *a */ - " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ - " mov #-1, %1 \n\t" /* retvat = -1 */ - " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ - " and %4, %0 \n\t" - " mov.l %0, @%2 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "=&r" (retval), - "+r" (a) - : "r" (mask), - "r" (not_mask) - : "memory" , "r0", "r1", "t"); - - return retval; -} - -static inline int test_and_change_bit(int nr, volatile void * addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long tmp; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-14, r15 \n\t" /* LOGIN */ - " mov.l @%2, %0 \n\t" /* load old value */ - " mov %0, %1 \n\t" /* %1 = *a */ - " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ - " mov #-1, %1 \n\t" /* retvat = -1 */ - " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ - " xor %3, %0 \n\t" - " mov.l %0, @%2 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (tmp), - "=&r" (retval), - "+r" (a) - : "r" (mask) - : "memory" , "r0", "r1", "t"); - - return retval; -} -#endif /* __ASM_SH_BITOPS_GRB_H */ diff --git a/include/asm-sh/bitops-irq.h b/include/asm-sh/bitops-irq.h deleted file mode 100644 index 653a12750584..000000000000 --- a/include/asm-sh/bitops-irq.h +++ /dev/null @@ -1,91 +0,0 @@ -#ifndef __ASM_SH_BITOPS_IRQ_H -#define __ASM_SH_BITOPS_IRQ_H - -static inline void set_bit(int nr, volatile void *addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - *a |= mask; - local_irq_restore(flags); -} - -static inline void clear_bit(int nr, volatile void *addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - *a &= ~mask; - local_irq_restore(flags); -} - -static inline void change_bit(int nr, volatile void *addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - *a ^= mask; - local_irq_restore(flags); -} - -static inline int test_and_set_bit(int nr, volatile void *addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - retval = (mask & *a) != 0; - *a |= mask; - local_irq_restore(flags); - - return retval; -} - -static inline int test_and_clear_bit(int nr, volatile void *addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - retval = (mask & *a) != 0; - *a &= ~mask; - local_irq_restore(flags); - - return retval; -} - -static inline int test_and_change_bit(int nr, volatile void *addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - retval = (mask & *a) != 0; - *a ^= mask; - local_irq_restore(flags); - - return retval; -} - -#endif /* __ASM_SH_BITOPS_IRQ_H */ diff --git a/include/asm-sh/bitops.h b/include/asm-sh/bitops.h deleted file mode 100644 index d7d382f63ee5..000000000000 --- a/include/asm-sh/bitops.h +++ /dev/null @@ -1,103 +0,0 @@ -#ifndef __ASM_SH_BITOPS_H -#define __ASM_SH_BITOPS_H - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include -/* For __swab32 */ -#include - -#ifdef CONFIG_GUSA_RB -#include -#else -#include -#endif - - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -#include - -#ifdef CONFIG_SUPERH32 -static inline unsigned long ffz(unsigned long word) -{ - unsigned long result; - - __asm__("1:\n\t" - "shlr %1\n\t" - "bt/s 1b\n\t" - " add #1, %0" - : "=r" (result), "=r" (word) - : "0" (~0L), "1" (word) - : "t"); - return result; -} - -/** - * __ffs - find first bit in word. - * @word: The word to search - * - * Undefined if no bit exists, so code should check against 0 first. - */ -static inline unsigned long __ffs(unsigned long word) -{ - unsigned long result; - - __asm__("1:\n\t" - "shlr %1\n\t" - "bf/s 1b\n\t" - " add #1, %0" - : "=r" (result), "=r" (word) - : "0" (~0L), "1" (word) - : "t"); - return result; -} -#else -static inline unsigned long ffz(unsigned long word) -{ - unsigned long result, __d2, __d3; - - __asm__("gettr tr0, %2\n\t" - "pta $+32, tr0\n\t" - "andi %1, 1, %3\n\t" - "beq %3, r63, tr0\n\t" - "pta $+4, tr0\n" - "0:\n\t" - "shlri.l %1, 1, %1\n\t" - "addi %0, 1, %0\n\t" - "andi %1, 1, %3\n\t" - "beqi %3, 1, tr0\n" - "1:\n\t" - "ptabs %2, tr0\n\t" - : "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3) - : "0" (0L), "1" (word)); - - return result; -} - -#include -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_BITOPS_H */ diff --git a/include/asm-sh/bug.h b/include/asm-sh/bug.h deleted file mode 100644 index c01718040166..000000000000 --- a/include/asm-sh/bug.h +++ /dev/null @@ -1,79 +0,0 @@ -#ifndef __ASM_SH_BUG_H -#define __ASM_SH_BUG_H - -#define TRAPA_BUG_OPCODE 0xc33e /* trapa #0x3e */ - -#ifdef CONFIG_GENERIC_BUG -#define HAVE_ARCH_BUG -#define HAVE_ARCH_WARN_ON - -/** - * _EMIT_BUG_ENTRY - * %1 - __FILE__ - * %2 - __LINE__ - * %3 - trap type - * %4 - sizeof(struct bug_entry) - * - * The trapa opcode itself sits in %0. - * The %O notation is used to avoid # generation. - * - * The offending file and line are encoded in the __bug_table section. - */ -#ifdef CONFIG_DEBUG_BUGVERBOSE -#define _EMIT_BUG_ENTRY \ - "\t.pushsection __bug_table,\"a\"\n" \ - "2:\t.long 1b, %O1\n" \ - "\t.short %O2, %O3\n" \ - "\t.org 2b+%O4\n" \ - "\t.popsection\n" -#else -#define _EMIT_BUG_ENTRY \ - "\t.pushsection __bug_table,\"a\"\n" \ - "2:\t.long 1b\n" \ - "\t.short %O3\n" \ - "\t.org 2b+%O4\n" \ - "\t.popsection\n" -#endif - -#define BUG() \ -do { \ - __asm__ __volatile__ ( \ - "1:\t.short %O0\n" \ - _EMIT_BUG_ENTRY \ - : \ - : "n" (TRAPA_BUG_OPCODE), \ - "i" (__FILE__), \ - "i" (__LINE__), "i" (0), \ - "i" (sizeof(struct bug_entry))); \ -} while (0) - -#define __WARN() \ -do { \ - __asm__ __volatile__ ( \ - "1:\t.short %O0\n" \ - _EMIT_BUG_ENTRY \ - : \ - : "n" (TRAPA_BUG_OPCODE), \ - "i" (__FILE__), \ - "i" (__LINE__), \ - "i" (BUGFLAG_WARNING), \ - "i" (sizeof(struct bug_entry))); \ -} while (0) - -#define WARN_ON(x) ({ \ - int __ret_warn_on = !!(x); \ - if (__builtin_constant_p(__ret_warn_on)) { \ - if (__ret_warn_on) \ - __WARN(); \ - } else { \ - if (unlikely(__ret_warn_on)) \ - __WARN(); \ - } \ - unlikely(__ret_warn_on); \ -}) - -#endif /* CONFIG_GENERIC_BUG */ - -#include - -#endif /* __ASM_SH_BUG_H */ diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h deleted file mode 100644 index 121b2ecddfc3..000000000000 --- a/include/asm-sh/bugs.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef __ASM_SH_BUGS_H -#define __ASM_SH_BUGS_H - -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - */ - -/* - * I don't know of any Super-H bugs yet. - */ - -#include - -static void __init check_bugs(void) -{ - extern unsigned long loops_per_jiffy; - char *p = &init_utsname()->machine[2]; /* "sh" */ - - current_cpu_data.loops_per_jiffy = loops_per_jiffy; - - switch (current_cpu_data.type) { - case CPU_SH7619: - *p++ = '2'; - break; - case CPU_SH7203 ... CPU_MXG: - *p++ = '2'; - *p++ = 'a'; - break; - case CPU_SH7705 ... CPU_SH7729: - *p++ = '3'; - break; - case CPU_SH7750 ... CPU_SH4_501: - *p++ = '4'; - break; - case CPU_SH7763 ... CPU_SHX3: - *p++ = '4'; - *p++ = 'a'; - break; - case CPU_SH7343 ... CPU_SH7366: - *p++ = '4'; - *p++ = 'a'; - *p++ = 'l'; - *p++ = '-'; - *p++ = 'd'; - *p++ = 's'; - *p++ = 'p'; - break; - case CPU_SH5_101 ... CPU_SH5_103: - *p++ = '6'; - *p++ = '4'; - break; - case CPU_SH_NONE: - /* - * Specifically use CPU_SH_NONE rather than default:, - * so we're able to have the compiler whine about - * unhandled enumerations. - */ - break; - } - - printk("CPU: %s\n", get_cpu_subtype(¤t_cpu_data)); - -#ifndef __LITTLE_ENDIAN__ - /* 'eb' means 'Endian Big' */ - *p++ = 'e'; - *p++ = 'b'; -#endif - *p = '\0'; -} -#endif /* __ASM_SH_BUGS_H */ diff --git a/include/asm-sh/byteorder.h b/include/asm-sh/byteorder.h deleted file mode 100644 index 4c13e6117563..000000000000 --- a/include/asm-sh/byteorder.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef __ASM_SH_BYTEORDER_H -#define __ASM_SH_BYTEORDER_H - -/* - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2000, 2001 Paolo Alberelli - */ -#include -#include - -static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) -{ - __asm__( -#ifdef __SH5__ - "byterev %0, %0\n\t" - "shari %0, 32, %0" -#else - "swap.b %0, %0\n\t" - "swap.w %0, %0\n\t" - "swap.b %0, %0" -#endif - : "=r" (x) - : "0" (x)); - - return x; -} - -static inline __attribute_const__ __u16 ___arch__swab16(__u16 x) -{ - __asm__( -#ifdef __SH5__ - "byterev %0, %0\n\t" - "shari %0, 32, %0" -#else - "swap.b %0, %0" -#endif - : "=r" (x) - : "0" (x)); - - return x; -} - -static inline __u64 ___arch__swab64(__u64 val) -{ - union { - struct { __u32 a,b; } s; - __u64 u; - } v, w; - v.u = val; - w.s.b = ___arch__swab32(v.s.a); - w.s.a = ___arch__swab32(v.s.b); - return w.u; -} - -#define __arch__swab64(x) ___arch__swab64(x) -#define __arch__swab32(x) ___arch__swab32(x) -#define __arch__swab16(x) ___arch__swab16(x) - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#ifdef __LITTLE_ENDIAN__ -#include -#else -#include -#endif - -#endif /* __ASM_SH_BYTEORDER_H */ diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h deleted file mode 100644 index 083419f47c65..000000000000 --- a/include/asm-sh/cache.h +++ /dev/null @@ -1,51 +0,0 @@ -/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $ - * - * include/asm-sh/cache.h - * - * Copyright 1999 (C) Niibe Yutaka - * Copyright 2002, 2003 (C) Paul Mundt - */ -#ifndef __ASM_SH_CACHE_H -#define __ASM_SH_CACHE_H -#ifdef __KERNEL__ - -#include -#include - -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) - -#ifndef __ASSEMBLY__ -struct cache_info { - unsigned int ways; /* Number of cache ways */ - unsigned int sets; /* Number of cache sets */ - unsigned int linesz; /* Cache line size (bytes) */ - - unsigned int way_size; /* sets * line size */ - - /* - * way_incr is the address offset for accessing the next way - * in memory mapped cache array ops. - */ - unsigned int way_incr; - unsigned int entry_shift; - unsigned int entry_mask; - - /* - * Compute a mask which selects the address bits which overlap between - * 1. those used to select the cache set during indexing - * 2. those in the physical page number. - */ - unsigned int alias_mask; - - unsigned int n_aliases; /* Number of aliases */ - - unsigned long flags; -}; - -int __init detect_cpu_and_cache_system(void); - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_CACHE_H */ diff --git a/include/asm-sh/cacheflush.h b/include/asm-sh/cacheflush.h deleted file mode 100644 index e034c3604111..000000000000 --- a/include/asm-sh/cacheflush.h +++ /dev/null @@ -1,81 +0,0 @@ -#ifndef __ASM_SH_CACHEFLUSH_H -#define __ASM_SH_CACHEFLUSH_H - -#ifdef __KERNEL__ - -#ifdef CONFIG_CACHE_OFF -/* - * Nothing to do when the cache is disabled, initial flush and explicit - * disabling is handled at CPU init time. - * - * See arch/sh/kernel/cpu/init.c:cache_init(). - */ -#define p3_cache_init() do { } while (0) -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_dcache_page(page) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_cache_sigtramp(vaddr) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define __flush_wback_region(start, size) do { (void)(start); } while (0) -#define __flush_purge_region(start, size) do { (void)(start); } while (0) -#define __flush_invalidate_region(start, size) do { (void)(start); } while (0) -#else -#include - -/* - * Consistent DMA requires that the __flush_xxx() primitives must be set - * for any of the enabled non-coherent caches (most of the UP CPUs), - * regardless of PIPT or VIPT cache configurations. - */ - -/* Flush (write-back only) a region (smaller than a page) */ -extern void __flush_wback_region(void *start, int size); -/* Flush (write-back & invalidate) a region (smaller than a page) */ -extern void __flush_purge_region(void *start, int size); -/* Flush (invalidate only) a region (smaller than a page) */ -extern void __flush_invalidate_region(void *start, int size); -#endif - -#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE -static inline void flush_kernel_dcache_page(struct page *page) -{ - flush_dcache_page(page); -} - -#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF) -extern void copy_to_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len); - -extern void copy_from_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len); -#else -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - flush_cache_page(vma, vaddr, page_to_pfn(page));\ - memcpy(dst, src, len); \ - flush_icache_user_range(vma, page, vaddr, len); \ - } while (0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - flush_cache_page(vma, vaddr, page_to_pfn(page));\ - memcpy(dst, src, len); \ - } while (0) -#endif - -#define flush_cache_vmap(start, end) flush_cache_all() -#define flush_cache_vunmap(start, end) flush_cache_all() - -#define HAVE_ARCH_UNMAPPED_AREA - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_CACHEFLUSH_H */ diff --git a/include/asm-sh/checksum.h b/include/asm-sh/checksum.h deleted file mode 100644 index 67496ab0ef04..000000000000 --- a/include/asm-sh/checksum.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifdef CONFIG_SUPERH32 -# include "checksum_32.h" -#else -# include "checksum_64.h" -#endif diff --git a/include/asm-sh/checksum_32.h b/include/asm-sh/checksum_32.h deleted file mode 100644 index 14b7ac2f0a07..000000000000 --- a/include/asm-sh/checksum_32.h +++ /dev/null @@ -1,215 +0,0 @@ -#ifndef __ASM_SH_CHECKSUM_H -#define __ASM_SH_CHECKSUM_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Kaz Kojima & Niibe Yutaka - */ - -#include - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums, and handles user-space pointer exceptions correctly, when needed. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, - int len, __wsum sum, - int *src_err_ptr, int *dst_err_ptr); - -/* - * Note: when you get a NULL pointer exception here this means someone - * passed in an incorrect kernel address to one of these functions. - * - * If you use these functions directly please don't forget the - * access_ok(). - */ -static inline -__wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum) -{ - return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL); -} - -static inline -__wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *err_ptr) -{ - return csum_partial_copy_generic((__force const void *)src, dst, - len, sum, err_ptr, NULL); -} - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int __dummy; - __asm__("swap.w %0, %1\n\t" - "extu.w %0, %0\n\t" - "extu.w %1, %1\n\t" - "add %1, %0\n\t" - "swap.w %0, %1\n\t" - "add %1, %0\n\t" - "not %0, %0\n\t" - : "=r" (sum), "=&r" (__dummy) - : "0" (sum) - : "t"); - return (__force __sum16)sum; -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - * - * i386 version by Jorge Cwik , adapted - * for linux by * Arnt Gulbrandsen. - */ -static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - unsigned int sum, __dummy0, __dummy1; - - __asm__ __volatile__( - "mov.l @%1+, %0\n\t" - "mov.l @%1+, %3\n\t" - "add #-2, %2\n\t" - "clrt\n\t" - "1:\t" - "addc %3, %0\n\t" - "movt %4\n\t" - "mov.l @%1+, %3\n\t" - "dt %2\n\t" - "bf/s 1b\n\t" - " cmp/eq #1, %4\n\t" - "addc %3, %0\n\t" - "addc %2, %0" /* Here %2 is 0, add carry-bit */ - /* Since the input registers which are loaded with iph and ihl - are modified, we must also specify them as outputs, or gcc - will assume they contain their original values. */ - : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1) - : "1" (iph), "2" (ihl) - : "t", "memory"); - - return csum_fold(sum); -} - -static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ -#ifdef __LITTLE_ENDIAN__ - unsigned long len_proto = (proto + len) << 8; -#else - unsigned long len_proto = proto + len; -#endif - __asm__("clrt\n\t" - "addc %0, %1\n\t" - "addc %2, %1\n\t" - "addc %3, %1\n\t" - "movt %0\n\t" - "add %1, %0" - : "=r" (sum), "=r" (len_proto) - : "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum) - : "t"); - - return sum; -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -#define _HAVE_ARCH_IPV6_CSUM -static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, - const struct in6_addr *daddr, - __u32 len, unsigned short proto, - __wsum sum) -{ - unsigned int __dummy; - __asm__("clrt\n\t" - "mov.l @(0,%2), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(4,%2), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(8,%2), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(12,%2), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(0,%3), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(4,%3), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(8,%3), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(12,%3), %1\n\t" - "addc %1, %0\n\t" - "addc %4, %0\n\t" - "addc %5, %0\n\t" - "movt %1\n\t" - "add %1, %0\n" - : "=r" (sum), "=&r" (__dummy) - : "r" (saddr), "r" (daddr), - "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) - : "t"); - - return csum_fold(sum); -} - -/* - * Copy and checksum to user - */ -#define HAVE_CSUM_COPY_USER -static inline __wsum csum_and_copy_to_user(const void *src, - void __user *dst, - int len, __wsum sum, - int *err_ptr) -{ - if (access_ok(VERIFY_WRITE, dst, len)) - return csum_partial_copy_generic((__force const void *)src, - dst, len, sum, NULL, err_ptr); - - if (len) - *err_ptr = -EFAULT; - - return (__force __wsum)-1; /* invalid checksum */ -} -#endif /* __ASM_SH_CHECKSUM_H */ diff --git a/include/asm-sh/checksum_64.h b/include/asm-sh/checksum_64.h deleted file mode 100644 index 9c62a031a8f5..000000000000 --- a/include/asm-sh/checksum_64.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef __ASM_SH_CHECKSUM_64_H -#define __ASM_SH_CHECKSUM_64_H - -/* - * include/asm-sh/checksum_64.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * Note: when you get a NULL pointer exception here this means someone - * passed in an incorrect kernel address to one of these functions. - * - * If you use these functions directly please don't forget the - * access_ok(). - */ - - -__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, - __wsum sum); - -__wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *err_ptr); - -static inline __sum16 csum_fold(__wsum csum) -{ - u32 sum = (__force u32)csum; - sum = (sum & 0xffff) + (sum >> 16); - sum = (sum & 0xffff) + (sum >> 16); - return (__force __sum16)~sum; -} - -__sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, unsigned short proto, - __wsum sum); - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -#endif /* __ASM_SH_CHECKSUM_64_H */ diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h deleted file mode 100644 index 720dfab7b15e..000000000000 --- a/include/asm-sh/clock.h +++ /dev/null @@ -1,97 +0,0 @@ -#ifndef __ASM_SH_CLOCK_H -#define __ASM_SH_CLOCK_H - -#include -#include -#include -#include -#include - -struct clk; - -struct clk_ops { - void (*init)(struct clk *clk); - void (*enable)(struct clk *clk); - void (*disable)(struct clk *clk); - void (*recalc)(struct clk *clk); - int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id); - long (*round_rate)(struct clk *clk, unsigned long rate); -}; - -struct clk { - struct list_head node; - const char *name; - int id; - struct module *owner; - - struct clk *parent; - struct clk_ops *ops; - - struct kref kref; - - unsigned long rate; - unsigned long flags; - unsigned long arch_flags; -}; - -#define CLK_ALWAYS_ENABLED (1 << 0) -#define CLK_RATE_PROPAGATES (1 << 1) - -/* Should be defined by processor-specific code */ -void arch_init_clk_ops(struct clk_ops **, int type); - -/* arch/sh/kernel/cpu/clock.c */ -int clk_init(void); - -void clk_recalc_rate(struct clk *); - -int clk_register(struct clk *); -void clk_unregister(struct clk *); - -static inline int clk_always_enable(const char *id) -{ - struct clk *clk; - int ret; - - clk = clk_get(NULL, id); - if (IS_ERR(clk)) - return PTR_ERR(clk); - - ret = clk_enable(clk); - if (ret) - clk_put(clk); - - return ret; -} - -/* the exported API, in addition to clk_set_rate */ -/** - * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter - * @clk: clock source - * @rate: desired clock rate in Hz - * @algo_id: algorithm id to be passed down to ops->set_rate - * - * Returns success (0) or negative errno. - */ -int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id); - -enum clk_sh_algo_id { - NO_CHANGE = 0, - - IUS_N1_N1, - IUS_322, - IUS_522, - IUS_N11, - - SB_N1, - - SB3_N1, - SB3_32, - SB3_43, - SB3_54, - - BP_N1, - - IP_N1, -}; -#endif /* __ASM_SH_CLOCK_H */ diff --git a/include/asm-sh/cmpxchg-grb.h b/include/asm-sh/cmpxchg-grb.h deleted file mode 100644 index e2681abe764f..000000000000 --- a/include/asm-sh/cmpxchg-grb.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef __ASM_SH_CMPXCHG_GRB_H -#define __ASM_SH_CMPXCHG_GRB_H - -static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) -{ - unsigned long retval; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " nop \n\t" - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-4, r15 \n\t" /* LOGIN */ - " mov.l @%1, %0 \n\t" /* load old value */ - " mov.l %2, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (retval), - "+r" (m) - : "r" (val) - : "memory", "r0", "r1"); - - return retval; -} - -static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) -{ - unsigned long retval; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-6, r15 \n\t" /* LOGIN */ - " mov.b @%1, %0 \n\t" /* load old value */ - " extu.b %0, %0 \n\t" /* extend as unsigned */ - " mov.b %2, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (retval), - "+r" (m) - : "r" (val) - : "memory" , "r0", "r1"); - - return retval; -} - -static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old, - unsigned long new) -{ - unsigned long retval; - - __asm__ __volatile__ ( - " .align 2 \n\t" - " mova 1f, r0 \n\t" /* r0 = end point */ - " nop \n\t" - " mov r15, r1 \n\t" /* r1 = saved sp */ - " mov #-8, r15 \n\t" /* LOGIN */ - " mov.l @%1, %0 \n\t" /* load old value */ - " cmp/eq %0, %2 \n\t" - " bf 1f \n\t" /* if not equal */ - " mov.l %2, @%1 \n\t" /* store new value */ - "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (retval), - "+r" (m) - : "r" (new) - : "memory" , "r0", "r1", "t"); - - return retval; -} - -#endif /* __ASM_SH_CMPXCHG_GRB_H */ diff --git a/include/asm-sh/cmpxchg-irq.h b/include/asm-sh/cmpxchg-irq.h deleted file mode 100644 index 43049ec0554b..000000000000 --- a/include/asm-sh/cmpxchg-irq.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef __ASM_SH_CMPXCHG_IRQ_H -#define __ASM_SH_CMPXCHG_IRQ_H - -static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) -{ - unsigned long flags, retval; - - local_irq_save(flags); - retval = *m; - *m = val; - local_irq_restore(flags); - return retval; -} - -static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) -{ - unsigned long flags, retval; - - local_irq_save(flags); - retval = *m; - *m = val & 0xff; - local_irq_restore(flags); - return retval; -} - -static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old, - unsigned long new) -{ - __u32 retval; - unsigned long flags; - - local_irq_save(flags); - retval = *m; - if (retval == old) - *m = new; - local_irq_restore(flags); /* implies memory barrier */ - return retval; -} - -#endif /* __ASM_SH_CMPXCHG_IRQ_H */ diff --git a/include/asm-sh/cpu-features.h b/include/asm-sh/cpu-features.h deleted file mode 100644 index 86308aa39731..000000000000 --- a/include/asm-sh/cpu-features.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef __ASM_SH_CPU_FEATURES_H -#define __ASM_SH_CPU_FEATURES_H - -/* - * Processor flags - * - * Note: When adding a new flag, keep cpu_flags[] in - * arch/sh/kernel/setup.c in sync so symbolic name - * mapping of the processor flags has a chance of being - * reasonably accurate. - * - * These flags are also available through the ELF - * auxiliary vector as AT_HWCAP. - */ -#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */ -#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */ -#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */ -#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */ -#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */ -#define CPU_HAS_PTEA 0x0020 /* PTEA register */ -#define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */ -#define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */ -#define CPU_HAS_OP32 0x0100 /* 32-bit instruction support */ - -#endif /* __ASM_SH_CPU_FEATURES_H */ diff --git a/include/asm-sh/cpu-sh2/addrspace.h b/include/asm-sh/cpu-sh2/addrspace.h deleted file mode 100644 index 2b9ab93efa4e..000000000000 --- a/include/asm-sh/cpu-sh2/addrspace.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Definitions for the address spaces of the SH-2 CPUs. - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_ADDRSPACE_H -#define __ASM_CPU_SH2_ADDRSPACE_H - -#define P0SEG 0x00000000 -#define P1SEG 0x80000000 -#define P2SEG 0xa0000000 -#define P3SEG 0xc0000000 -#define P4SEG 0xe0000000 - -#endif /* __ASM_CPU_SH2_ADDRSPACE_H */ diff --git a/include/asm-sh/cpu-sh2/cache.h b/include/asm-sh/cpu-sh2/cache.h deleted file mode 100644 index 4e0b16500686..000000000000 --- a/include/asm-sh/cpu-sh2/cache.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * include/asm-sh/cpu-sh2/cache.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_CACHE_H -#define __ASM_CPU_SH2_CACHE_H - -#define L1_CACHE_SHIFT 4 - -#define SH_CACHE_VALID 1 -#define SH_CACHE_UPDATED 2 -#define SH_CACHE_COMBINED 4 -#define SH_CACHE_ASSOC 8 - -#if defined(CONFIG_CPU_SUBTYPE_SH7619) -#define CCR 0xffffffec - -#define CCR_CACHE_CE 0x01 /* Cache enable */ -#define CCR_CACHE_WT 0x06 /* CCR[bit1=1,bit2=1] */ - /* 0x00000000-0x7fffffff: Write-through */ - /* 0x80000000-0x9fffffff: Write-back */ - /* 0xc0000000-0xdfffffff: Write-through */ -#define CCR_CACHE_CB 0x00 /* CCR[bit1=0,bit2=0] */ - /* 0x00000000-0x7fffffff: Write-back */ - /* 0x80000000-0x9fffffff: Write-through */ - /* 0xc0000000-0xdfffffff: Write-back */ -#define CCR_CACHE_CF 0x08 /* Cache invalidate */ - -#define CACHE_OC_ADDRESS_ARRAY 0xf0000000 -#define CACHE_OC_DATA_ARRAY 0xf1000000 - -#define CCR_CACHE_ENABLE CCR_CACHE_CE -#define CCR_CACHE_INVALIDATE CCR_CACHE_CF -#endif - -#endif /* __ASM_CPU_SH2_CACHE_H */ diff --git a/include/asm-sh/cpu-sh2/cacheflush.h b/include/asm-sh/cpu-sh2/cacheflush.h deleted file mode 100644 index 2979efb26de3..000000000000 --- a/include/asm-sh/cpu-sh2/cacheflush.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-sh/cpu-sh2/cacheflush.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_CACHEFLUSH_H -#define __ASM_CPU_SH2_CACHEFLUSH_H - -/* - * Cache flushing: - * - * - flush_cache_all() flushes entire cache - * - flush_cache_mm(mm) flushes the specified mm context's cache lines - * - flush_cache_dup mm(mm) handles cache flushing when forking - * - flush_cache_page(mm, vmaddr, pfn) flushes a single page - * - flush_cache_range(vma, start, end) flushes a range of pages - * - * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache - * - flush_icache_range(start, end) flushes(invalidates) a range for icache - * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache - * - * Caches are indexed (effectively) by physical address on SH-2, so - * we don't need them. - */ -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define flush_cache_sigtramp(vaddr) do { } while (0) - -#define p3_cache_init() do { } while (0) -#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */ - diff --git a/include/asm-sh/cpu-sh2/dma.h b/include/asm-sh/cpu-sh2/dma.h deleted file mode 100644 index d66b43cdc637..000000000000 --- a/include/asm-sh/cpu-sh2/dma.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Definitions for the SH-2 DMAC. - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_DMA_H -#define __ASM_CPU_SH2_DMA_H - -#define SH_MAX_DMA_CHANNELS 2 - -#define SAR ((unsigned long[]){ 0xffffff80, 0xffffff90 }) -#define DAR ((unsigned long[]){ 0xffffff84, 0xffffff94 }) -#define DMATCR ((unsigned long[]){ 0xffffff88, 0xffffff98 }) -#define CHCR ((unsigned long[]){ 0xfffffffc, 0xffffff9c }) - -#define DMAOR 0xffffffb0 - -#endif /* __ASM_CPU_SH2_DMA_H */ - diff --git a/include/asm-sh/cpu-sh2/freq.h b/include/asm-sh/cpu-sh2/freq.h deleted file mode 100644 index 31de475da70b..000000000000 --- a/include/asm-sh/cpu-sh2/freq.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * include/asm-sh/cpu-sh2/freq.h - * - * Copyright (C) 2006 Yoshinori Sato - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_FREQ_H -#define __ASM_CPU_SH2_FREQ_H - -#if defined(CONFIG_CPU_SUBTYPE_SH7619) -#define FREQCR 0xf815ff80 -#endif - -#endif /* __ASM_CPU_SH2_FREQ_H */ - diff --git a/include/asm-sh/cpu-sh2/mmu_context.h b/include/asm-sh/cpu-sh2/mmu_context.h deleted file mode 100644 index beeb299e01ec..000000000000 --- a/include/asm-sh/cpu-sh2/mmu_context.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-sh/cpu-sh2/mmu_context.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H -#define __ASM_CPU_SH2_MMU_CONTEXT_H - -/* No MMU */ - -#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */ - diff --git a/include/asm-sh/cpu-sh2/rtc.h b/include/asm-sh/cpu-sh2/rtc.h deleted file mode 100644 index 39e2d6e94782..000000000000 --- a/include/asm-sh/cpu-sh2/rtc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_SH_CPU_SH2_RTC_H -#define __ASM_SH_CPU_SH2_RTC_H - -#define rtc_reg_size sizeof(u16) -#define RTC_BIT_INVERTED 0 -#define RTC_DEF_CAPABILITIES 0UL - -#endif /* __ASM_SH_CPU_SH2_RTC_H */ diff --git a/include/asm-sh/cpu-sh2/sigcontext.h b/include/asm-sh/cpu-sh2/sigcontext.h deleted file mode 100644 index fe5c15dd6e87..000000000000 --- a/include/asm-sh/cpu-sh2/sigcontext.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_CPU_SH2_SIGCONTEXT_H -#define __ASM_CPU_SH2_SIGCONTEXT_H - -struct sigcontext { - unsigned long oldmask; - - /* CPU registers */ - unsigned long sc_regs[16]; - unsigned long sc_pc; - unsigned long sc_pr; - unsigned long sc_sr; - unsigned long sc_gbr; - unsigned long sc_mach; - unsigned long sc_macl; -}; - -#endif /* __ASM_CPU_SH2_SIGCONTEXT_H */ diff --git a/include/asm-sh/cpu-sh2/timer.h b/include/asm-sh/cpu-sh2/timer.h deleted file mode 100644 index a39c241e8195..000000000000 --- a/include/asm-sh/cpu-sh2/timer.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_CPU_SH2_TIMER_H -#define __ASM_CPU_SH2_TIMER_H - -/* Nothing needed yet */ - -#endif /* __ASM_CPU_SH2_TIMER_H */ diff --git a/include/asm-sh/cpu-sh2/ubc.h b/include/asm-sh/cpu-sh2/ubc.h deleted file mode 100644 index ba0e87f19c7a..000000000000 --- a/include/asm-sh/cpu-sh2/ubc.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-sh/cpu-sh2/ubc.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_UBC_H -#define __ASM_CPU_SH2_UBC_H - -#define UBC_BARA 0xffffff40 -#define UBC_BAMRA 0xffffff44 -#define UBC_BBRA 0xffffff48 -#define UBC_BARB 0xffffff60 -#define UBC_BAMRB 0xffffff64 -#define UBC_BBRB 0xffffff68 -#define UBC_BDRB 0xffffff70 -#define UBC_BDMRB 0xffffff74 -#define UBC_BRCR 0xffffff78 - -/* - * We don't have any ASID changes to make in the UBC on the SH-2. - * - * Make these purposely invalid to track misuse. - */ -#define UBC_BASRA 0x00000000 -#define UBC_BASRB 0x00000000 - -#endif /* __ASM_CPU_SH2_UBC_H */ - diff --git a/include/asm-sh/cpu-sh2/watchdog.h b/include/asm-sh/cpu-sh2/watchdog.h deleted file mode 100644 index 393161c9c6d0..000000000000 --- a/include/asm-sh/cpu-sh2/watchdog.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * include/asm-sh/cpu-sh2/watchdog.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_WATCHDOG_H -#define __ASM_CPU_SH2_WATCHDOG_H - -/* - * More SH-2 brilliance .. its not good enough that we can't read - * and write the same sizes to WTCNT, now we have to read and write - * with different sizes at different addresses for WTCNT _and_ RSTCSR. - * - * At least on the bright side no one has managed to screw over WTCSR - * in this fashion .. yet. - */ -/* Register definitions */ -#define WTCNT 0xfffffe80 -#define WTCSR 0xfffffe80 -#define RSTCSR 0xfffffe82 - -#define WTCNT_R (WTCNT + 1) -#define RSTCSR_R (RSTCSR + 1) - -/* Bit definitions */ -#define WTCSR_IOVF 0x80 -#define WTCSR_WT 0x40 -#define WTCSR_TME 0x20 -#define WTCSR_RSTS 0x00 - -#define RSTCSR_RSTS 0x20 - -/** - * sh_wdt_read_rstcsr - Read from Reset Control/Status Register - * - * Reads back the RSTCSR value. - */ -static inline __u8 sh_wdt_read_rstcsr(void) -{ - /* - * Same read/write brain-damage as for WTCNT here.. - */ - return ctrl_inb(RSTCSR_R); -} - -/** - * sh_wdt_write_csr - Write to Reset Control/Status Register - * - * @val: Value to write - * - * Writes the given value @val to the lower byte of the control/status - * register. The upper byte is set manually on each write. - */ -static inline void sh_wdt_write_rstcsr(__u8 val) -{ - /* - * Note: Due to the brain-damaged nature of this register, - * we can't presently touch the WOVF bit, since the upper byte - * has to be swapped for this. So just leave it alone.. - */ - ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR); -} - -#endif /* __ASM_CPU_SH2_WATCHDOG_H */ - diff --git a/include/asm-sh/cpu-sh2a/addrspace.h b/include/asm-sh/cpu-sh2a/addrspace.h deleted file mode 100644 index 795ddd6856a3..000000000000 --- a/include/asm-sh/cpu-sh2a/addrspace.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H -#define __ASM_SH_CPU_SH2A_ADDRSPACE_H - -#define P0SEG 0x00000000 -#define P1SEG 0x00000000 -#define P2SEG 0x20000000 -#define P3SEG 0x00000000 -#define P4SEG 0x80000000 - -#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */ diff --git a/include/asm-sh/cpu-sh2a/cache.h b/include/asm-sh/cpu-sh2a/cache.h deleted file mode 100644 index afe228b3f493..000000000000 --- a/include/asm-sh/cpu-sh2a/cache.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * include/asm-sh/cpu-sh2a/cache.h - * - * Copyright (C) 2004 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2A_CACHE_H -#define __ASM_CPU_SH2A_CACHE_H - -#define L1_CACHE_SHIFT 4 - -#define SH_CACHE_VALID 1 -#define SH_CACHE_UPDATED 2 -#define SH_CACHE_COMBINED 4 -#define SH_CACHE_ASSOC 8 - -#define CCR 0xfffc1000 /* CCR1 */ -#define CCR2 0xfffc1004 - -/* - * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not - * listed here are reserved. - */ -#define CCR_CACHE_CB 0x0000 /* Hack */ -#define CCR_CACHE_OCE 0x0001 -#define CCR_CACHE_WT 0x0002 -#define CCR_CACHE_OCI 0x0008 /* OCF */ -#define CCR_CACHE_ICE 0x0100 -#define CCR_CACHE_ICI 0x0800 /* ICF */ - -#define CACHE_IC_ADDRESS_ARRAY 0xf0000000 -#define CACHE_OC_ADDRESS_ARRAY 0xf0800000 - -#define CCR_CACHE_ENABLE (CCR_CACHE_OCE | CCR_CACHE_ICE) -#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI | CCR_CACHE_ICI) - -#endif /* __ASM_CPU_SH2A_CACHE_H */ diff --git a/include/asm-sh/cpu-sh2a/cacheflush.h b/include/asm-sh/cpu-sh2a/cacheflush.h deleted file mode 100644 index fa3186c73350..000000000000 --- a/include/asm-sh/cpu-sh2a/cacheflush.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh2a/dma.h b/include/asm-sh/cpu-sh2a/dma.h deleted file mode 100644 index 0d5ad85c1de8..000000000000 --- a/include/asm-sh/cpu-sh2a/dma.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh2a/freq.h b/include/asm-sh/cpu-sh2a/freq.h deleted file mode 100644 index 830fd43b6cdc..000000000000 --- a/include/asm-sh/cpu-sh2a/freq.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-sh/cpu-sh2a/freq.h - * - * Copyright (C) 2006 Yoshinori Sato - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2A_FREQ_H -#define __ASM_CPU_SH2A_FREQ_H - -#define FREQCR 0xfffe0010 - -#endif /* __ASM_CPU_SH2A_FREQ_H */ - diff --git a/include/asm-sh/cpu-sh2a/mmu_context.h b/include/asm-sh/cpu-sh2a/mmu_context.h deleted file mode 100644 index cd2387f7db9e..000000000000 --- a/include/asm-sh/cpu-sh2a/mmu_context.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh2a/rtc.h b/include/asm-sh/cpu-sh2a/rtc.h deleted file mode 100644 index afb511e2bed7..000000000000 --- a/include/asm-sh/cpu-sh2a/rtc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_SH_CPU_SH2A_RTC_H -#define __ASM_SH_CPU_SH2A_RTC_H - -#define rtc_reg_size sizeof(u16) -#define RTC_BIT_INVERTED 0 -#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR - -#endif /* __ASM_SH_CPU_SH2A_RTC_H */ diff --git a/include/asm-sh/cpu-sh2a/timer.h b/include/asm-sh/cpu-sh2a/timer.h deleted file mode 100644 index fee504adf11e..000000000000 --- a/include/asm-sh/cpu-sh2a/timer.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh2a/ubc.h b/include/asm-sh/cpu-sh2a/ubc.h deleted file mode 100644 index cf28062b96a2..000000000000 --- a/include/asm-sh/cpu-sh2a/ubc.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh2a/watchdog.h b/include/asm-sh/cpu-sh2a/watchdog.h deleted file mode 100644 index c1b3e2488478..000000000000 --- a/include/asm-sh/cpu-sh2a/watchdog.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh3/adc.h b/include/asm-sh/cpu-sh3/adc.h deleted file mode 100644 index b289e3ca19a6..000000000000 --- a/include/asm-sh/cpu-sh3/adc.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __ASM_CPU_SH3_ADC_H -#define __ASM_CPU_SH3_ADC_H - -/* - * Copyright (C) 2004 Andriy Skulysh - */ - - -#define ADDRAH 0xa4000080 -#define ADDRAL 0xa4000082 -#define ADDRBH 0xa4000084 -#define ADDRBL 0xa4000086 -#define ADDRCH 0xa4000088 -#define ADDRCL 0xa400008a -#define ADDRDH 0xa400008c -#define ADDRDL 0xa400008e -#define ADCSR 0xa4000090 - -#define ADCSR_ADF 0x80 -#define ADCSR_ADIE 0x40 -#define ADCSR_ADST 0x20 -#define ADCSR_MULTI 0x10 -#define ADCSR_CKS 0x08 -#define ADCSR_CH_MASK 0x07 - -#define ADCR 0xa4000092 - -#endif /* __ASM_CPU_SH3_ADC_H */ diff --git a/include/asm-sh/cpu-sh3/addrspace.h b/include/asm-sh/cpu-sh3/addrspace.h deleted file mode 100644 index 0f94726c7d62..000000000000 --- a/include/asm-sh/cpu-sh3/addrspace.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Kaz Kojima - * - * Defitions for the address spaces of the SH-3 CPUs. - */ -#ifndef __ASM_CPU_SH3_ADDRSPACE_H -#define __ASM_CPU_SH3_ADDRSPACE_H - -#define P0SEG 0x00000000 -#define P1SEG 0x80000000 -#define P2SEG 0xa0000000 -#define P3SEG 0xc0000000 -#define P4SEG 0xe0000000 - -#endif /* __ASM_CPU_SH3_ADDRSPACE_H */ diff --git a/include/asm-sh/cpu-sh3/cache.h b/include/asm-sh/cpu-sh3/cache.h deleted file mode 100644 index bee2d81c56bf..000000000000 --- a/include/asm-sh/cpu-sh3/cache.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/cache.h - * - * Copyright (C) 1999 Niibe Yutaka - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_CACHE_H -#define __ASM_CPU_SH3_CACHE_H - -#define L1_CACHE_SHIFT 4 - -#define SH_CACHE_VALID 1 -#define SH_CACHE_UPDATED 2 -#define SH_CACHE_COMBINED 4 -#define SH_CACHE_ASSOC 8 - -#define CCR 0xffffffec /* Address of Cache Control Register */ - -#define CCR_CACHE_CE 0x01 /* Cache Enable */ -#define CCR_CACHE_WT 0x02 /* Write-Through (for P0,U0,P3) (else writeback) */ -#define CCR_CACHE_CB 0x04 /* Write-Back (for P1) (else writethrough) */ -#define CCR_CACHE_CF 0x08 /* Cache Flush */ -#define CCR_CACHE_ORA 0x20 /* RAM mode */ - -#define CACHE_OC_ADDRESS_ARRAY 0xf0000000 -#define CACHE_PHYSADDR_MASK 0x1ffffc00 - -#define CCR_CACHE_ENABLE CCR_CACHE_CE -#define CCR_CACHE_INVALIDATE CCR_CACHE_CF - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7710) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) -#define CCR3_REG 0xa40000b4 -#define CCR_CACHE_16KB 0x00010000 -#define CCR_CACHE_32KB 0x00020000 -#endif - -#endif /* __ASM_CPU_SH3_CACHE_H */ diff --git a/include/asm-sh/cpu-sh3/cacheflush.h b/include/asm-sh/cpu-sh3/cacheflush.h deleted file mode 100644 index f70d8ef76a15..000000000000 --- a/include/asm-sh/cpu-sh3/cacheflush.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/cacheflush.h - * - * Copyright (C) 1999 Niibe Yutaka - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_CACHEFLUSH_H -#define __ASM_CPU_SH3_CACHEFLUSH_H - -/* - * Cache flushing: - * - * - flush_cache_all() flushes entire cache - * - flush_cache_mm(mm) flushes the specified mm context's cache lines - * - flush_cache_dup mm(mm) handles cache flushing when forking - * - flush_cache_page(mm, vmaddr, pfn) flushes a single page - * - flush_cache_range(vma, start, end) flushes a range of pages - * - * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache - * - flush_icache_range(start, end) flushes(invalidates) a range for icache - * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache - * - * Caches are indexed (effectively) by physical address on SH-3, so - * we don't need them. - */ - -#if defined(CONFIG_SH7705_CACHE_32KB) - -/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the - * SH4. Unlike the SH4 this is a unified cache so we need to do some work - * in mmap when 'exec'ing a new binary - */ - /* 32KB cache, 4kb PAGE sizes need to check bit 12 */ -#define CACHE_ALIAS 0x00001000 - -#define PG_mapped PG_arch_1 - -void flush_cache_all(void); -void flush_cache_mm(struct mm_struct *mm); -#define flush_cache_dup_mm(mm) flush_cache_mm(mm) -void flush_cache_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn); -void flush_dcache_page(struct page *pg); -void flush_icache_range(unsigned long start, unsigned long end); -void flush_icache_page(struct vm_area_struct *vma, struct page *page); -#else -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_dcache_page(page) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) -#endif - -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -/* SH3 has unified cache so no special action needed here */ -#define flush_cache_sigtramp(vaddr) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) - -#define p3_cache_init() do { } while (0) - -#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */ diff --git a/include/asm-sh/cpu-sh3/dac.h b/include/asm-sh/cpu-sh3/dac.h deleted file mode 100644 index 05fda8316ebc..000000000000 --- a/include/asm-sh/cpu-sh3/dac.h +++ /dev/null @@ -1,41 +0,0 @@ -#ifndef __ASM_CPU_SH3_DAC_H -#define __ASM_CPU_SH3_DAC_H - -/* - * Copyright (C) 2003 Andriy Skulysh - */ - - -#define DADR0 0xa40000a0 -#define DADR1 0xa40000a2 -#define DACR 0xa40000a4 -#define DACR_DAOE1 0x80 -#define DACR_DAOE0 0x40 -#define DACR_DAE 0x20 - - -static __inline__ void sh_dac_enable(int channel) -{ - unsigned char v; - v = ctrl_inb(DACR); - if(channel) v |= DACR_DAOE1; - else v |= DACR_DAOE0; - ctrl_outb(v,DACR); -} - -static __inline__ void sh_dac_disable(int channel) -{ - unsigned char v; - v = ctrl_inb(DACR); - if(channel) v &= ~DACR_DAOE1; - else v &= ~DACR_DAOE0; - ctrl_outb(v,DACR); -} - -static __inline__ void sh_dac_output(u8 value, int channel) -{ - if(channel) ctrl_outb(value,DADR1); - else ctrl_outb(value,DADR0); -} - -#endif /* __ASM_CPU_SH3_DAC_H */ diff --git a/include/asm-sh/cpu-sh3/dma.h b/include/asm-sh/cpu-sh3/dma.h deleted file mode 100644 index 6813c3220a1d..000000000000 --- a/include/asm-sh/cpu-sh3/dma.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef __ASM_CPU_SH3_DMA_H -#define __ASM_CPU_SH3_DMA_H - - -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) -#define SH_DMAC_BASE 0xa4010020 -#else -#define SH_DMAC_BASE 0xa4000020 -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709) -#define DMTE0_IRQ 48 -#define DMTE1_IRQ 49 -#define DMTE2_IRQ 50 -#define DMTE3_IRQ 51 -#define DMTE4_IRQ 76 -#define DMTE5_IRQ 77 -#endif - -/* Definitions for the SuperH DMAC */ -#define TM_BURST 0x00000020 -#define TS_8 0x00000000 -#define TS_16 0x00000008 -#define TS_32 0x00000010 -#define TS_128 0x00000018 - -#define CHCR_TS_MASK 0x18 -#define CHCR_TS_SHIFT 3 - -#define DMAOR_INIT DMAOR_DME - -/* - * The SuperH DMAC supports a number of transmit sizes, we list them here, - * with their respective values as they appear in the CHCR registers. - */ -enum { - XMIT_SZ_8BIT, - XMIT_SZ_16BIT, - XMIT_SZ_32BIT, - XMIT_SZ_128BIT, -}; - -static unsigned int ts_shift[] __maybe_unused = { - [XMIT_SZ_8BIT] = 0, - [XMIT_SZ_16BIT] = 1, - [XMIT_SZ_32BIT] = 2, - [XMIT_SZ_128BIT] = 4, -}; - -#endif /* __ASM_CPU_SH3_DMA_H */ diff --git a/include/asm-sh/cpu-sh3/freq.h b/include/asm-sh/cpu-sh3/freq.h deleted file mode 100644 index 53c62302b2e3..000000000000 --- a/include/asm-sh/cpu-sh3/freq.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/freq.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_FREQ_H -#define __ASM_CPU_SH3_FREQ_H - -#ifdef CONFIG_CPU_SUBTYPE_SH7712 -#define FRQCR 0xA415FF80 -#else -#define FRQCR 0xffffff80 -#endif - -#define MIN_DIVISOR_NR 0 -#define MAX_DIVISOR_NR 4 - -#define FRQCR_CKOEN 0x0100 -#define FRQCR_PLLEN 0x0080 -#define FRQCR_PSTBY 0x0040 - -#endif /* __ASM_CPU_SH3_FREQ_H */ - diff --git a/include/asm-sh/cpu-sh3/gpio.h b/include/asm-sh/cpu-sh3/gpio.h deleted file mode 100644 index 4e53eb314b8f..000000000000 --- a/include/asm-sh/cpu-sh3/gpio.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/gpio.h - * - * Copyright (C) 2007 Markus Brunner, Mark Jonas - * - * Addresses for the Pin Function Controller - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef _CPU_SH3_GPIO_H -#define _CPU_SH3_GPIO_H - -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) - -/* Control registers */ -#define PORT_PACR 0xA4050100UL -#define PORT_PBCR 0xA4050102UL -#define PORT_PCCR 0xA4050104UL -#define PORT_PDCR 0xA4050106UL -#define PORT_PECR 0xA4050108UL -#define PORT_PFCR 0xA405010AUL -#define PORT_PGCR 0xA405010CUL -#define PORT_PHCR 0xA405010EUL -#define PORT_PJCR 0xA4050110UL -#define PORT_PKCR 0xA4050112UL -#define PORT_PLCR 0xA4050114UL -#define PORT_PMCR 0xA4050116UL -#define PORT_PPCR 0xA4050118UL -#define PORT_PRCR 0xA405011AUL -#define PORT_PSCR 0xA405011CUL -#define PORT_PTCR 0xA405011EUL -#define PORT_PUCR 0xA4050120UL -#define PORT_PVCR 0xA4050122UL - -/* Data registers */ -#define PORT_PADR 0xA4050140UL -/* Address of PORT_PBDR is wrong in the datasheet, see errata 2005-09-21 */ -#define PORT_PBDR 0xA4050142UL -#define PORT_PCDR 0xA4050144UL -#define PORT_PDDR 0xA4050146UL -#define PORT_PEDR 0xA4050148UL -#define PORT_PFDR 0xA405014AUL -#define PORT_PGDR 0xA405014CUL -#define PORT_PHDR 0xA405014EUL -#define PORT_PJDR 0xA4050150UL -#define PORT_PKDR 0xA4050152UL -#define PORT_PLDR 0xA4050154UL -#define PORT_PMDR 0xA4050156UL -#define PORT_PPDR 0xA4050158UL -#define PORT_PRDR 0xA405015AUL -#define PORT_PSDR 0xA405015CUL -#define PORT_PTDR 0xA405015EUL -#define PORT_PUDR 0xA4050160UL -#define PORT_PVDR 0xA4050162UL - -/* Pin Select Registers */ -#define PORT_PSELA 0xA4050124UL -#define PORT_PSELB 0xA4050126UL -#define PORT_PSELC 0xA4050128UL -#define PORT_PSELD 0xA405012AUL - -#endif - -#endif diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/include/asm-sh/cpu-sh3/mmu_context.h deleted file mode 100644 index ab09da73ce77..000000000000 --- a/include/asm-sh/cpu-sh3/mmu_context.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/mmu_context.h - * - * Copyright (C) 1999 Niibe Yutaka - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_MMU_CONTEXT_H -#define __ASM_CPU_SH3_MMU_CONTEXT_H - -#define MMU_PTEH 0xFFFFFFF0 /* Page table entry register HIGH */ -#define MMU_PTEL 0xFFFFFFF4 /* Page table entry register LOW */ -#define MMU_TTB 0xFFFFFFF8 /* Translation table base register */ -#define MMU_TEA 0xFFFFFFFC /* TLB Exception Address */ - -#define MMUCR 0xFFFFFFE0 /* MMU Control Register */ - -#define MMU_TLB_ADDRESS_ARRAY 0xF2000000 -#define MMU_PAGE_ASSOC_BIT 0x80 - -#define MMU_NTLB_ENTRIES 128 /* for 7708 */ -#define MMU_NTLB_WAYS 4 -#define MMU_CONTROL_INIT 0x007 /* SV=0, TF=1, IX=1, AT=1 */ - -#define TRA 0xffffffd0 -#define EXPEVT 0xffffffd4 - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7710) || \ - defined(CONFIG_CPU_SUBTYPE_SH7712) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) -#define INTEVT 0xa4000000 /* INTEVTE2(0xa4000000) */ -#else -#define INTEVT 0xffffffd8 -#endif - -#endif /* __ASM_CPU_SH3_MMU_CONTEXT_H */ - diff --git a/include/asm-sh/cpu-sh3/rtc.h b/include/asm-sh/cpu-sh3/rtc.h deleted file mode 100644 index 319404aaee37..000000000000 --- a/include/asm-sh/cpu-sh3/rtc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_SH_CPU_SH3_RTC_H -#define __ASM_SH_CPU_SH3_RTC_H - -#define rtc_reg_size sizeof(u16) -#define RTC_BIT_INVERTED 0 /* No bug on SH7708, SH7709A */ -#define RTC_DEF_CAPABILITIES 0UL - -#endif /* __ASM_SH_CPU_SH3_RTC_H */ diff --git a/include/asm-sh/cpu-sh3/sigcontext.h b/include/asm-sh/cpu-sh3/sigcontext.h deleted file mode 100644 index 17310dc03dcd..000000000000 --- a/include/asm-sh/cpu-sh3/sigcontext.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_CPU_SH3_SIGCONTEXT_H -#define __ASM_CPU_SH3_SIGCONTEXT_H - -struct sigcontext { - unsigned long oldmask; - - /* CPU registers */ - unsigned long sc_regs[16]; - unsigned long sc_pc; - unsigned long sc_pr; - unsigned long sc_sr; - unsigned long sc_gbr; - unsigned long sc_mach; - unsigned long sc_macl; -}; - -#endif /* __ASM_CPU_SH3_SIGCONTEXT_H */ diff --git a/include/asm-sh/cpu-sh3/timer.h b/include/asm-sh/cpu-sh3/timer.h deleted file mode 100644 index 793acf12aa08..000000000000 --- a/include/asm-sh/cpu-sh3/timer.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/timer.h - * - * Copyright (C) 2004 Lineo Solutions, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_TIMER_H -#define __ASM_CPU_SH3_TIMER_H - -/* - * --------------------------------------------------------------------------- - * TMU Common definitions for SH3 processors - * SH7706 - * SH7709S - * SH7727 - * SH7729R - * SH7710 - * SH7720 - * SH7710 - * --------------------------------------------------------------------------- - */ - -#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721) -#define TMU_TOCR 0xfffffe90 /* Byte access */ -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) -#define TMU_012_TSTR 0xa412fe92 /* Byte access */ - -#define TMU0_TCOR 0xa412fe94 /* Long access */ -#define TMU0_TCNT 0xa412fe98 /* Long access */ -#define TMU0_TCR 0xa412fe9c /* Word access */ - -#define TMU1_TCOR 0xa412fea0 /* Long access */ -#define TMU1_TCNT 0xa412fea4 /* Long access */ -#define TMU1_TCR 0xa412fea8 /* Word access */ - -#define TMU2_TCOR 0xa412feac /* Long access */ -#define TMU2_TCNT 0xa412feb0 /* Long access */ -#define TMU2_TCR 0xa412feb4 /* Word access */ - -#else -#define TMU_012_TSTR 0xfffffe92 /* Byte access */ - -#define TMU0_TCOR 0xfffffe94 /* Long access */ -#define TMU0_TCNT 0xfffffe98 /* Long access */ -#define TMU0_TCR 0xfffffe9c /* Word access */ - -#define TMU1_TCOR 0xfffffea0 /* Long access */ -#define TMU1_TCNT 0xfffffea4 /* Long access */ -#define TMU1_TCR 0xfffffea8 /* Word access */ - -#define TMU2_TCOR 0xfffffeac /* Long access */ -#define TMU2_TCNT 0xfffffeb0 /* Long access */ -#define TMU2_TCR 0xfffffeb4 /* Word access */ -#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721) -#define TMU2_TCPR2 0xfffffeb8 /* Long access */ -#endif -#endif - -#endif /* __ASM_CPU_SH3_TIMER_H */ - diff --git a/include/asm-sh/cpu-sh3/ubc.h b/include/asm-sh/cpu-sh3/ubc.h deleted file mode 100644 index 4e6381d5ff7a..000000000000 --- a/include/asm-sh/cpu-sh3/ubc.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/ubc.h - * - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_UBC_H -#define __ASM_CPU_SH3_UBC_H - -#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) -#define UBC_BARA 0xa4ffffb0 -#define UBC_BAMRA 0xa4ffffb4 -#define UBC_BBRA 0xa4ffffb8 -#define UBC_BASRA 0xffffffe4 -#define UBC_BARB 0xa4ffffa0 -#define UBC_BAMRB 0xa4ffffa4 -#define UBC_BBRB 0xa4ffffa8 -#define UBC_BASRB 0xffffffe8 -#define UBC_BDRB 0xa4ffff90 -#define UBC_BDMRB 0xa4ffff94 -#define UBC_BRCR 0xa4ffff98 -#else -#define UBC_BARA 0xffffffb0 -#define UBC_BAMRA 0xffffffb4 -#define UBC_BBRA 0xffffffb8 -#define UBC_BASRA 0xffffffe4 -#define UBC_BARB 0xffffffa0 -#define UBC_BAMRB 0xffffffa4 -#define UBC_BBRB 0xffffffa8 -#define UBC_BASRB 0xffffffe8 -#define UBC_BDRB 0xffffff90 -#define UBC_BDMRB 0xffffff94 -#define UBC_BRCR 0xffffff98 -#endif - -#endif /* __ASM_CPU_SH3_UBC_H */ diff --git a/include/asm-sh/cpu-sh3/watchdog.h b/include/asm-sh/cpu-sh3/watchdog.h deleted file mode 100644 index 4ee0347298d8..000000000000 --- a/include/asm-sh/cpu-sh3/watchdog.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/watchdog.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_WATCHDOG_H -#define __ASM_CPU_SH3_WATCHDOG_H - -/* Register definitions */ -#define WTCNT 0xffffff84 -#define WTCSR 0xffffff86 - -/* Bit definitions */ -#define WTCSR_TME 0x80 -#define WTCSR_WT 0x40 -#define WTCSR_RSTS 0x20 -#define WTCSR_WOVF 0x10 -#define WTCSR_IOVF 0x08 - -#endif /* __ASM_CPU_SH3_WATCHDOG_H */ - diff --git a/include/asm-sh/cpu-sh4/addrspace.h b/include/asm-sh/cpu-sh4/addrspace.h deleted file mode 100644 index a3fa733c1c7d..000000000000 --- a/include/asm-sh/cpu-sh4/addrspace.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Kaz Kojima - * - * Defitions for the address spaces of the SH-4 CPUs. - */ -#ifndef __ASM_CPU_SH4_ADDRSPACE_H -#define __ASM_CPU_SH4_ADDRSPACE_H - -#define P0SEG 0x00000000 -#define P1SEG 0x80000000 -#define P2SEG 0xa0000000 -#define P3SEG 0xc0000000 -#define P4SEG 0xe0000000 - -/* Detailed P4SEG */ -#define P4SEG_STORE_QUE (P4SEG) -#define P4SEG_IC_ADDR 0xf0000000 -#define P4SEG_IC_DATA 0xf1000000 -#define P4SEG_ITLB_ADDR 0xf2000000 -#define P4SEG_ITLB_DATA 0xf3000000 -#define P4SEG_OC_ADDR 0xf4000000 -#define P4SEG_OC_DATA 0xf5000000 -#define P4SEG_TLB_ADDR 0xf6000000 -#define P4SEG_TLB_DATA 0xf7000000 -#define P4SEG_REG_BASE 0xff000000 - -#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */ -#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */ - -#endif /* __ASM_CPU_SH4_ADDRSPACE_H */ - diff --git a/include/asm-sh/cpu-sh4/cache.h b/include/asm-sh/cpu-sh4/cache.h deleted file mode 100644 index 1c61ebf5c8e3..000000000000 --- a/include/asm-sh/cpu-sh4/cache.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/cache.h - * - * Copyright (C) 1999 Niibe Yutaka - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_CACHE_H -#define __ASM_CPU_SH4_CACHE_H - -#define L1_CACHE_SHIFT 5 - -#define SH_CACHE_VALID 1 -#define SH_CACHE_UPDATED 2 -#define SH_CACHE_COMBINED 4 -#define SH_CACHE_ASSOC 8 - -#define CCR 0xff00001c /* Address of Cache Control Register */ -#define CCR_CACHE_OCE 0x0001 /* Operand Cache Enable */ -#define CCR_CACHE_WT 0x0002 /* Write-Through (for P0,U0,P3) (else writeback)*/ -#define CCR_CACHE_CB 0x0004 /* Copy-Back (for P1) (else writethrough) */ -#define CCR_CACHE_OCI 0x0008 /* OC Invalidate */ -#define CCR_CACHE_ORA 0x0020 /* OC RAM Mode */ -#define CCR_CACHE_OIX 0x0080 /* OC Index Enable */ -#define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */ -#define CCR_CACHE_ICI 0x0800 /* IC Invalidate */ -#define CCR_CACHE_IIX 0x8000 /* IC Index Enable */ -#ifndef CONFIG_CPU_SH4A -#define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */ -#endif - -/* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */ -#define CCR_CACHE_ENABLE (CCR_CACHE_OCE|CCR_CACHE_ICE) -#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI|CCR_CACHE_ICI) - -#define CACHE_IC_ADDRESS_ARRAY 0xf0000000 -#define CACHE_OC_ADDRESS_ARRAY 0xf4000000 - -#endif /* __ASM_CPU_SH4_CACHE_H */ - diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/include/asm-sh/cpu-sh4/cacheflush.h deleted file mode 100644 index 065306d376eb..000000000000 --- a/include/asm-sh/cpu-sh4/cacheflush.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/cacheflush.h - * - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_CACHEFLUSH_H -#define __ASM_CPU_SH4_CACHEFLUSH_H - -/* - * Caches are broken on SH-4 (unless we use write-through - * caching; in which case they're only semi-broken), - * so we need them. - */ -void flush_cache_all(void); -void flush_dcache_all(void); -void flush_cache_mm(struct mm_struct *mm); -#define flush_cache_dup_mm(mm) flush_cache_mm(mm) -void flush_cache_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, - unsigned long pfn); -void flush_dcache_page(struct page *pg); - -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -void flush_icache_range(unsigned long start, unsigned long end); -void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, - unsigned long addr, int len); - -#define flush_icache_page(vma,pg) do { } while (0) - -/* Initialization of P3 area for copy_user_page */ -void p3_cache_init(void); - -#define PG_mapped PG_arch_1 - -#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */ diff --git a/include/asm-sh/cpu-sh4/dma-sh7780.h b/include/asm-sh/cpu-sh4/dma-sh7780.h deleted file mode 100644 index 71b426a6e482..000000000000 --- a/include/asm-sh/cpu-sh4/dma-sh7780.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H -#define __ASM_SH_CPU_SH4_DMA_SH7780_H - -#define REQ_HE 0x000000C0 -#define REQ_H 0x00000080 -#define REQ_LE 0x00000040 -#define TM_BURST 0x0000020 -#define TS_8 0x00000000 -#define TS_16 0x00000008 -#define TS_32 0x00000010 -#define TS_16BLK 0x00000018 -#define TS_32BLK 0x00100000 - -/* - * The SuperH DMAC supports a number of transmit sizes, we list them here, - * with their respective values as they appear in the CHCR registers. - * - * Defaults to a 64-bit transfer size. - */ -enum { - XMIT_SZ_8BIT, - XMIT_SZ_16BIT, - XMIT_SZ_32BIT, - XMIT_SZ_128BIT, - XMIT_SZ_256BIT, -}; - -/* - * The DMA count is defined as the number of bytes to transfer. - */ -static unsigned int ts_shift[] __maybe_unused = { - [XMIT_SZ_8BIT] = 0, - [XMIT_SZ_16BIT] = 1, - [XMIT_SZ_32BIT] = 2, - [XMIT_SZ_128BIT] = 4, - [XMIT_SZ_256BIT] = 5, -}; - -#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */ diff --git a/include/asm-sh/cpu-sh4/dma.h b/include/asm-sh/cpu-sh4/dma.h deleted file mode 100644 index aaf71b018c28..000000000000 --- a/include/asm-sh/cpu-sh4/dma.h +++ /dev/null @@ -1,65 +0,0 @@ -#ifndef __ASM_CPU_SH4_DMA_H -#define __ASM_CPU_SH4_DMA_H - -#define DMAOR_INIT ( 0x8000 | DMAOR_DME ) - -/* SH7751/7760/7780 DMA IRQ sources */ -#define DMTE0_IRQ 34 -#define DMTE1_IRQ 35 -#define DMTE2_IRQ 36 -#define DMTE3_IRQ 37 -#define DMTE4_IRQ 44 -#define DMTE5_IRQ 45 -#define DMTE6_IRQ 46 -#define DMTE7_IRQ 47 -#define DMAE_IRQ 38 - -#ifdef CONFIG_CPU_SH4A -#define SH_DMAC_BASE 0xfc808020 - -#define CHCR_TS_MASK 0x18 -#define CHCR_TS_SHIFT 3 - -#include -#else -#define SH_DMAC_BASE 0xffa00000 - -/* Definitions for the SuperH DMAC */ -#define TM_BURST 0x0000080 -#define TS_8 0x00000010 -#define TS_16 0x00000020 -#define TS_32 0x00000030 -#define TS_64 0x00000000 - -#define CHCR_TS_MASK 0x70 -#define CHCR_TS_SHIFT 4 - -#define DMAOR_COD 0x00000008 - -/* - * The SuperH DMAC supports a number of transmit sizes, we list them here, - * with their respective values as they appear in the CHCR registers. - * - * Defaults to a 64-bit transfer size. - */ -enum { - XMIT_SZ_64BIT, - XMIT_SZ_8BIT, - XMIT_SZ_16BIT, - XMIT_SZ_32BIT, - XMIT_SZ_256BIT, -}; - -/* - * The DMA count is defined as the number of bytes to transfer. - */ -static unsigned int ts_shift[] __maybe_unused = { - [XMIT_SZ_64BIT] = 3, - [XMIT_SZ_8BIT] = 0, - [XMIT_SZ_16BIT] = 1, - [XMIT_SZ_32BIT] = 2, - [XMIT_SZ_256BIT] = 5, -}; -#endif - -#endif /* __ASM_CPU_SH4_DMA_H */ diff --git a/include/asm-sh/cpu-sh4/fpu.h b/include/asm-sh/cpu-sh4/fpu.h deleted file mode 100644 index febef7342528..000000000000 --- a/include/asm-sh/cpu-sh4/fpu.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * linux/arch/sh/kernel/cpu/sh4/sh4_fpu.h - * - * Copyright (C) 2006 STMicroelectronics Limited - * Author: Carl Shaw - * - * May be copied or modified under the terms of the GNU General Public - * License Version 2. See linux/COPYING for more information. - * - * Definitions for SH4 FPU operations - */ - -#ifndef __CPU_SH4_FPU_H -#define __CPU_SH4_FPU_H - -#define FPSCR_ENABLE_MASK 0x00000f80UL - -#define FPSCR_FMOV_DOUBLE (1<<1) - -#define FPSCR_CAUSE_INEXACT (1<<12) -#define FPSCR_CAUSE_UNDERFLOW (1<<13) -#define FPSCR_CAUSE_OVERFLOW (1<<14) -#define FPSCR_CAUSE_DIVZERO (1<<15) -#define FPSCR_CAUSE_INVALID (1<<16) -#define FPSCR_CAUSE_ERROR (1<<17) - -#define FPSCR_DBL_PRECISION (1<<19) -#define FPSCR_ROUNDING_MODE(x) ((x >> 20) & 3) -#define FPSCR_RM_NEAREST (0) -#define FPSCR_RM_ZERO (1) - -#endif diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h deleted file mode 100644 index c23af81c2e70..000000000000 --- a/include/asm-sh/cpu-sh4/freq.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/freq.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_FREQ_H -#define __ASM_CPU_SH4_FREQ_H - -#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \ - defined(CONFIG_CPU_SUBTYPE_SH7723) || \ - defined(CONFIG_CPU_SUBTYPE_SH7343) || \ - defined(CONFIG_CPU_SUBTYPE_SH7366) -#define FRQCR 0xa4150000 -#define VCLKCR 0xa4150004 -#define SCLKACR 0xa4150008 -#define SCLKBCR 0xa415000c -#define IrDACLKCR 0xa4150010 -#define MSTPCR0 0xa4150030 -#define MSTPCR1 0xa4150034 -#define MSTPCR2 0xa4150038 -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) -#define FRQCR 0xffc80000 -#elif defined(CONFIG_CPU_SUBTYPE_SH7785) -#define FRQCR0 0xffc80000 -#define FRQCR1 0xffc80004 -#define FRQMR1 0xffc80014 -#elif defined(CONFIG_CPU_SUBTYPE_SHX3) -#define FRQCR 0xffc00014 -#else -#define FRQCR 0xffc00000 -#define FRQCR_PSTBY 0x0200 -#define FRQCR_PLLEN 0x0400 -#define FRQCR_CKOEN 0x0800 -#endif -#define MIN_DIVISOR_NR 0 -#define MAX_DIVISOR_NR 3 - -#endif /* __ASM_CPU_SH4_FREQ_H */ - diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/include/asm-sh/cpu-sh4/mmu_context.h deleted file mode 100644 index 9ea8eb27b18e..000000000000 --- a/include/asm-sh/cpu-sh4/mmu_context.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/mmu_context.h - * - * Copyright (C) 1999 Niibe Yutaka - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_MMU_CONTEXT_H -#define __ASM_CPU_SH4_MMU_CONTEXT_H - -#define MMU_PTEH 0xFF000000 /* Page table entry register HIGH */ -#define MMU_PTEL 0xFF000004 /* Page table entry register LOW */ -#define MMU_TTB 0xFF000008 /* Translation table base register */ -#define MMU_TEA 0xFF00000C /* TLB Exception Address */ -#define MMU_PTEA 0xFF000034 /* Page table entry assistance register */ - -#define MMUCR 0xFF000010 /* MMU Control Register */ - -#define MMU_ITLB_ADDRESS_ARRAY 0xF2000000 -#define MMU_UTLB_ADDRESS_ARRAY 0xF6000000 -#define MMU_PAGE_ASSOC_BIT 0x80 - -#define MMUCR_TI (1<<2) - -#ifdef CONFIG_X2TLB -#define MMUCR_ME (1 << 7) -#else -#define MMUCR_ME (0) -#endif - -#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40) -#define MMUCR_SE (1 << 4) -#else -#define MMUCR_SE (0) -#endif - -#ifdef CONFIG_SH_STORE_QUEUES -#define MMUCR_SQMD (1 << 9) -#else -#define MMUCR_SQMD (0) -#endif - -#define MMU_NTLB_ENTRIES 64 -#define MMU_CONTROL_INIT (0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE) - -#define MMU_ITLB_DATA_ARRAY 0xF3000000 -#define MMU_UTLB_DATA_ARRAY 0xF7000000 - -#define MMU_UTLB_ENTRIES 64 -#define MMU_U_ENTRY_SHIFT 8 -#define MMU_UTLB_VALID 0x100 -#define MMU_ITLB_ENTRIES 4 -#define MMU_I_ENTRY_SHIFT 8 -#define MMU_ITLB_VALID 0x100 - -#define TRA 0xff000020 -#define EXPEVT 0xff000024 -#define INTEVT 0xff000028 - -#endif /* __ASM_CPU_SH4_MMU_CONTEXT_H */ - diff --git a/include/asm-sh/cpu-sh4/rtc.h b/include/asm-sh/cpu-sh4/rtc.h deleted file mode 100644 index 25b1e6adfe8c..000000000000 --- a/include/asm-sh/cpu-sh4/rtc.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_SH_CPU_SH4_RTC_H -#define __ASM_SH_CPU_SH4_RTC_H - -#ifdef CONFIG_CPU_SUBTYPE_SH7723 -#define rtc_reg_size sizeof(u16) -#else -#define rtc_reg_size sizeof(u32) -#endif - -#define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */ -#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR - -#endif /* __ASM_SH_CPU_SH4_RTC_H */ diff --git a/include/asm-sh/cpu-sh4/sigcontext.h b/include/asm-sh/cpu-sh4/sigcontext.h deleted file mode 100644 index ab392f120e06..000000000000 --- a/include/asm-sh/cpu-sh4/sigcontext.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef __ASM_CPU_SH4_SIGCONTEXT_H -#define __ASM_CPU_SH4_SIGCONTEXT_H - -struct sigcontext { - unsigned long oldmask; - - /* CPU registers */ - unsigned long sc_regs[16]; - unsigned long sc_pc; - unsigned long sc_pr; - unsigned long sc_sr; - unsigned long sc_gbr; - unsigned long sc_mach; - unsigned long sc_macl; - - /* FPU registers */ - unsigned long sc_fpregs[16]; - unsigned long sc_xfpregs[16]; - unsigned int sc_fpscr; - unsigned int sc_fpul; - unsigned int sc_ownedfp; -}; - -#endif /* __ASM_CPU_SH4_SIGCONTEXT_H */ diff --git a/include/asm-sh/cpu-sh4/sq.h b/include/asm-sh/cpu-sh4/sq.h deleted file mode 100644 index 586d6491816a..000000000000 --- a/include/asm-sh/cpu-sh4/sq.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/sq.h - * - * Copyright (C) 2001, 2002, 2003 Paul Mundt - * Copyright (C) 2001, 2002 M. R. Brown - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_SQ_H -#define __ASM_CPU_SH4_SQ_H - -#include - -/* - * Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be - * mapped to any physical address space. Since data is written (and aligned) - * to 32-byte boundaries, we need to be sure that all allocations are aligned. - */ -#define SQ_SIZE 32 -#define SQ_ALIGN_MASK (~(SQ_SIZE - 1)) -#define SQ_ALIGN(addr) (((addr)+SQ_SIZE-1) & SQ_ALIGN_MASK) - -#define SQ_QACR0 (P4SEG_REG_BASE + 0x38) -#define SQ_QACR1 (P4SEG_REG_BASE + 0x3c) -#define SQ_ADDRMAX (P4SEG_STORE_QUE + 0x04000000) - -/* arch/sh/kernel/cpu/sh4/sq.c */ -unsigned long sq_remap(unsigned long phys, unsigned int size, - const char *name, unsigned long flags); -void sq_unmap(unsigned long vaddr); -void sq_flush_range(unsigned long start, unsigned int len); - -#endif /* __ASM_CPU_SH4_SQ_H */ diff --git a/include/asm-sh/cpu-sh4/timer.h b/include/asm-sh/cpu-sh4/timer.h deleted file mode 100644 index d1e796b96888..000000000000 --- a/include/asm-sh/cpu-sh4/timer.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/timer.h - * - * Copyright (C) 2004 Lineo Solutions, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_TIMER_H -#define __ASM_CPU_SH4_TIMER_H - -/* - * --------------------------------------------------------------------------- - * TMU Common definitions for SH4 processors - * SH7750S/SH7750R - * SH7751/SH7751R - * SH7760 - * SH-X3 - * --------------------------------------------------------------------------- - */ -#ifdef CONFIG_CPU_SUBTYPE_SHX3 -#define TMU_012_BASE 0xffc10000 -#define TMU_345_BASE 0xffc20000 -#else -#define TMU_012_BASE 0xffd80000 -#define TMU_345_BASE 0xfe100000 -#endif - -#define TMU_TOCR TMU_012_BASE /* Not supported on all CPUs */ - -#define TMU_012_TSTR (TMU_012_BASE + 0x04) -#define TMU_345_TSTR (TMU_345_BASE + 0x04) - -#define TMU0_TCOR (TMU_012_BASE + 0x08) -#define TMU0_TCNT (TMU_012_BASE + 0x0c) -#define TMU0_TCR (TMU_012_BASE + 0x10) - -#define TMU1_TCOR (TMU_012_BASE + 0x14) -#define TMU1_TCNT (TMU_012_BASE + 0x18) -#define TMU1_TCR (TMU_012_BASE + 0x1c) - -#define TMU2_TCOR (TMU_012_BASE + 0x20) -#define TMU2_TCNT (TMU_012_BASE + 0x24) -#define TMU2_TCR (TMU_012_BASE + 0x28) -#define TMU2_TCPR (TMU_012_BASE + 0x2c) - -#define TMU3_TCOR (TMU_345_BASE + 0x08) -#define TMU3_TCNT (TMU_345_BASE + 0x0c) -#define TMU3_TCR (TMU_345_BASE + 0x10) - -#define TMU4_TCOR (TMU_345_BASE + 0x14) -#define TMU4_TCNT (TMU_345_BASE + 0x18) -#define TMU4_TCR (TMU_345_BASE + 0x1c) - -#define TMU5_TCOR (TMU_345_BASE + 0x20) -#define TMU5_TCNT (TMU_345_BASE + 0x24) -#define TMU5_TCR (TMU_345_BASE + 0x28) - -#endif /* __ASM_CPU_SH4_TIMER_H */ diff --git a/include/asm-sh/cpu-sh4/ubc.h b/include/asm-sh/cpu-sh4/ubc.h deleted file mode 100644 index c86e17050935..000000000000 --- a/include/asm-sh/cpu-sh4/ubc.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/ubc.h - * - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt - * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_UBC_H -#define __ASM_CPU_SH4_UBC_H - -#if defined(CONFIG_CPU_SH4A) -#define UBC_CBR0 0xff200000 -#define UBC_CRR0 0xff200004 -#define UBC_CAR0 0xff200008 -#define UBC_CAMR0 0xff20000c -#define UBC_CBR1 0xff200020 -#define UBC_CRR1 0xff200024 -#define UBC_CAR1 0xff200028 -#define UBC_CAMR1 0xff20002c -#define UBC_CDR1 0xff200030 -#define UBC_CDMR1 0xff200034 -#define UBC_CETR1 0xff200038 -#define UBC_CCMFR 0xff200600 -#define UBC_CBCR 0xff200620 - -/* CBR */ -#define UBC_CBR_AIE (0x01<<30) -#define UBC_CBR_ID_INST (0x01<<4) -#define UBC_CBR_RW_READ (0x01<<1) -#define UBC_CBR_CE (0x01) - -#define UBC_CBR_AIV_MASK (0x00FF0000) -#define UBC_CBR_AIV_SHIFT (16) -#define UBC_CBR_AIV_SET(asid) (((asid)<| - * +-----------------------------+-----------------+------+----------+------+ - * | | | ways |set index |offset| - * +-----------------------------+-----------------+------+----------+------+ - * ^ 2 bits 8 bits 5 bits - * +- Bit 31 - * - * Cacheline size is based on offset: 5 bits = 32 bytes per line - * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG - * have a broader space for registers. These are outlined by - * CACHE_?C_*_STEP below. - * - */ - -/* Instruction cache */ -#define CACHE_IC_ADDRESS_ARRAY 0x01000000 - -/* Operand Cache */ -#define CACHE_OC_ADDRESS_ARRAY 0x01800000 - -/* These declarations relate to cache 'synonyms' in the operand cache. A - 'synonym' occurs where effective address bits overlap between those used for - indexing the cache sets and those passed to the MMU for translation. In the - case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */ - -#define CACHE_OC_N_SYNBITS 1 /* Number of synonym bits */ -#define CACHE_OC_SYN_SHIFT 12 -/* Mask to select synonym bit(s) */ -#define CACHE_OC_SYN_MASK (((1UL<). -** Assigns symbolic names to control & target registers. -*/ - -/* - * Define some useful aliases for control registers. - */ -#define SR cr0 -#define SSR cr1 -#define PSSR cr2 - /* cr3 UNDEFINED */ -#define INTEVT cr4 -#define EXPEVT cr5 -#define PEXPEVT cr6 -#define TRA cr7 -#define SPC cr8 -#define PSPC cr9 -#define RESVEC cr10 -#define VBR cr11 - /* cr12 UNDEFINED */ -#define TEA cr13 - /* cr14-cr15 UNDEFINED */ -#define DCR cr16 -#define KCR0 cr17 -#define KCR1 cr18 - /* cr19-cr31 UNDEFINED */ - /* cr32-cr61 RESERVED */ -#define CTC cr62 -#define USR cr63 - -/* - * ABI dependent registers (general purpose set) - */ -#define RET r2 -#define ARG1 r2 -#define ARG2 r3 -#define ARG3 r4 -#define ARG4 r5 -#define ARG5 r6 -#define ARG6 r7 -#define SP r15 -#define LINK r18 -#define ZERO r63 - -/* - * Status register defines: used only by assembly sources (and - * syntax independednt) - */ -#define SR_RESET_VAL 0x0000000050008000 -#define SR_HARMLESS 0x00000000500080f0 /* Write ignores for most */ -#define SR_ENABLE_FPU 0xffffffffffff7fff /* AND with this */ - -#if defined (CONFIG_SH64_SR_WATCH) -#define SR_ENABLE_MMU 0x0000000084000000 /* OR with this */ -#else -#define SR_ENABLE_MMU 0x0000000080000000 /* OR with this */ -#endif - -#define SR_UNBLOCK_EXC 0xffffffffefffffff /* AND with this */ -#define SR_BLOCK_EXC 0x0000000010000000 /* OR with this */ - -#else /* Not __ASSEMBLY__ syntax */ - -/* -** Stringify reg. name -*/ -#define __str(x) #x - -/* Stringify control register names for use in inline assembly */ -#define __SR __str(SR) -#define __SSR __str(SSR) -#define __PSSR __str(PSSR) -#define __INTEVT __str(INTEVT) -#define __EXPEVT __str(EXPEVT) -#define __PEXPEVT __str(PEXPEVT) -#define __TRA __str(TRA) -#define __SPC __str(SPC) -#define __PSPC __str(PSPC) -#define __RESVEC __str(RESVEC) -#define __VBR __str(VBR) -#define __TEA __str(TEA) -#define __DCR __str(DCR) -#define __KCR0 __str(KCR0) -#define __KCR1 __str(KCR1) -#define __CTC __str(CTC) -#define __USR __str(USR) - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH_CPU_SH5_REGISTERS_H */ diff --git a/include/asm-sh/cpu-sh5/rtc.h b/include/asm-sh/cpu-sh5/rtc.h deleted file mode 100644 index 12ea0ed144e1..000000000000 --- a/include/asm-sh/cpu-sh5/rtc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_SH_CPU_SH5_RTC_H -#define __ASM_SH_CPU_SH5_RTC_H - -#define rtc_reg_size sizeof(u32) -#define RTC_BIT_INVERTED 0 /* The SH-5 RTC is surprisingly sane! */ -#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR - -#endif /* __ASM_SH_CPU_SH5_RTC_H */ diff --git a/include/asm-sh/cpu-sh5/timer.h b/include/asm-sh/cpu-sh5/timer.h deleted file mode 100644 index 88da9b341a36..000000000000 --- a/include/asm-sh/cpu-sh5/timer.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASM_SH_CPU_SH5_TIMER_H -#define __ASM_SH_CPU_SH5_TIMER_H - -#endif /* __ASM_SH_CPU_SH5_TIMER_H */ diff --git a/include/asm-sh/cputime.h b/include/asm-sh/cputime.h deleted file mode 100644 index 6ca395d1393e..000000000000 --- a/include/asm-sh/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __SH_CPUTIME_H -#define __SH_CPUTIME_H - -#include - -#endif /* __SH_CPUTIME_H */ diff --git a/include/asm-sh/current.h b/include/asm-sh/current.h deleted file mode 100644 index 62b63880b333..000000000000 --- a/include/asm-sh/current.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_SH_CURRENT_H -#define __ASM_SH_CURRENT_H - -/* - * Copyright (C) 1999 Niibe Yutaka - * - */ - -#include - -struct task_struct; - -static __inline__ struct task_struct * get_current(void) -{ - return current_thread_info()->task; -} - -#define current get_current() - -#endif /* __ASM_SH_CURRENT_H */ diff --git a/include/asm-sh/delay.h b/include/asm-sh/delay.h deleted file mode 100644 index 4b16bf9b56bd..000000000000 --- a/include/asm-sh/delay.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef __ASM_SH_DELAY_H -#define __ASM_SH_DELAY_H - -/* - * Copyright (C) 1993 Linus Torvalds - * - * Delay routines calling functions in arch/sh/lib/delay.c - */ - -extern void __bad_udelay(void); -extern void __bad_ndelay(void); - -extern void __udelay(unsigned long usecs); -extern void __ndelay(unsigned long nsecs); -extern void __const_udelay(unsigned long xloops); -extern void __delay(unsigned long loops); - -#define udelay(n) (__builtin_constant_p(n) ? \ - ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \ - __udelay(n)) - -#define ndelay(n) (__builtin_constant_p(n) ? \ - ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \ - __ndelay(n)) - -#endif /* __ASM_SH_DELAY_H */ diff --git a/include/asm-sh/device.h b/include/asm-sh/device.h deleted file mode 100644 index efd511d0803a..000000000000 --- a/include/asm-sh/device.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - -struct platform_device; -/* allocate contiguous memory chunk and fill in struct resource */ -int platform_resource_setup_memory(struct platform_device *pdev, - char *name, unsigned long memsize); - diff --git a/include/asm-sh/div64.h b/include/asm-sh/div64.h deleted file mode 100644 index 6cd978cefb28..000000000000 --- a/include/asm-sh/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h deleted file mode 100644 index 6c0b8a2de143..000000000000 --- a/include/asm-sh/dma-mapping.h +++ /dev/null @@ -1,192 +0,0 @@ -#ifndef __ASM_SH_DMA_MAPPING_H -#define __ASM_SH_DMA_MAPPING_H - -#include -#include -#include -#include - -extern struct bus_type pci_bus_type; - -#define dma_supported(dev, mask) (1) - -static inline int dma_set_mask(struct device *dev, u64 mask) -{ - if (!dev->dma_mask || !dma_supported(dev, mask)) - return -EIO; - - *dev->dma_mask = mask; - - return 0; -} - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction dir); - -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) -#define dma_is_consistent(d, h) (1) - -static inline dma_addr_t dma_map_single(struct device *dev, - void *ptr, size_t size, - enum dma_data_direction dir) -{ -#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) - if (dev->bus == &pci_bus_type) - return virt_to_phys(ptr); -#endif - dma_cache_sync(dev, ptr, size, dir); - - return virt_to_phys(ptr); -} - -#define dma_unmap_single(dev, addr, size, dir) do { } while (0) - -static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir) -{ - int i; - - for (i = 0; i < nents; i++) { -#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) - dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); -#endif - sg[i].dma_address = sg_phys(&sg[i]); - } - - return nents; -} - -#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0) - -static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction dir) -{ - return dma_map_single(dev, page_address(page) + offset, size, dir); -} - -static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, enum dma_data_direction dir) -{ - dma_unmap_single(dev, dma_address, size, dir); -} - -static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction dir) -{ -#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) - if (dev->bus == &pci_bus_type) - return; -#endif - dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir); -} - -static inline void dma_sync_single_range(struct device *dev, - dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction dir) -{ -#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) - if (dev->bus == &pci_bus_type) - return; -#endif - dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir); -} - -static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction dir) -{ - int i; - - for (i = 0; i < nelems; i++) { -#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) - dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); -#endif - sg[i].dma_address = sg_phys(&sg[i]); - } -} - -static inline void dma_sync_single_for_cpu(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction dir) -{ - dma_sync_single(dev, dma_handle, size, dir); -} - -static inline void dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, - size_t size, - enum dma_data_direction dir) -{ - dma_sync_single(dev, dma_handle, size, dir); -} - -static inline void dma_sync_single_range_for_cpu(struct device *dev, - dma_addr_t dma_handle, - unsigned long offset, - size_t size, - enum dma_data_direction direction) -{ - dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction); -} - -static inline void dma_sync_single_range_for_device(struct device *dev, - dma_addr_t dma_handle, - unsigned long offset, - size_t size, - enum dma_data_direction direction) -{ - dma_sync_single_for_device(dev, dma_handle+offset, size, direction); -} - - -static inline void dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sg, int nelems, - enum dma_data_direction dir) -{ - dma_sync_sg(dev, sg, nelems, dir); -} - -static inline void dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sg, int nelems, - enum dma_data_direction dir) -{ - dma_sync_sg(dev, sg, nelems, dir); -} - - -static inline int dma_get_cache_alignment(void) -{ - /* - * Each processor family will define its own L1_CACHE_SHIFT, - * L1_CACHE_BYTES wraps to this, so this is always safe. - */ - return L1_CACHE_BYTES; -} - -static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) -{ - return dma_addr == 0; -} - -#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY - -extern int -dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, - dma_addr_t device_addr, size_t size, int flags); - -extern void -dma_release_declared_memory(struct device *dev); - -extern void * -dma_mark_declared_memory_occupied(struct device *dev, - dma_addr_t device_addr, size_t size); - -#endif /* __ASM_SH_DMA_MAPPING_H */ diff --git a/include/asm-sh/dma.h b/include/asm-sh/dma.h deleted file mode 100644 index a65b02fd186e..000000000000 --- a/include/asm-sh/dma.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - * include/asm-sh/dma.h - * - * Copyright (C) 2003, 2004 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_DMA_H -#define __ASM_SH_DMA_H -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -/* The maximum address that we can perform a DMA transfer to on this platform */ -/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any - occurrence should be flagged as an error. */ -/* But... */ -/* XXX: This is not applicable to SuperH, just needed for alloc_bootmem */ -#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x10000000) - -#ifdef CONFIG_NR_DMA_CHANNELS -# define MAX_DMA_CHANNELS (CONFIG_NR_DMA_CHANNELS) -#else -# define MAX_DMA_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS) -#endif - -/* - * Read and write modes can mean drastically different things depending on the - * channel configuration. Consult your DMAC documentation and module - * implementation for further clues. - */ -#define DMA_MODE_READ 0x00 -#define DMA_MODE_WRITE 0x01 -#define DMA_MODE_MASK 0x01 - -#define DMA_AUTOINIT 0x10 - -/* - * DMAC (dma_info) flags - */ -enum { - DMAC_CHANNELS_CONFIGURED = 0x01, - DMAC_CHANNELS_TEI_CAPABLE = 0x02, /* Transfer end interrupt */ -}; - -/* - * DMA channel capabilities / flags - */ -enum { - DMA_CONFIGURED = 0x01, - - /* - * Transfer end interrupt, inherited from DMAC. - * wait_queue used in dma_wait_for_completion. - */ - DMA_TEI_CAPABLE = 0x02, -}; - -extern spinlock_t dma_spin_lock; - -struct dma_channel; - -struct dma_ops { - int (*request)(struct dma_channel *chan); - void (*free)(struct dma_channel *chan); - - int (*get_residue)(struct dma_channel *chan); - int (*xfer)(struct dma_channel *chan); - int (*configure)(struct dma_channel *chan, unsigned long flags); - int (*extend)(struct dma_channel *chan, unsigned long op, void *param); -}; - -struct dma_channel { - char dev_id[16]; /* unique name per DMAC of channel */ - - unsigned int chan; /* DMAC channel number */ - unsigned int vchan; /* Virtual channel number */ - - unsigned int mode; - unsigned int count; - - unsigned long sar; - unsigned long dar; - - const char **caps; - - unsigned long flags; - atomic_t busy; - - wait_queue_head_t wait_queue; - - struct sys_device dev; - void *priv_data; -}; - -struct dma_info { - struct platform_device *pdev; - - const char *name; - unsigned int nr_channels; - unsigned long flags; - - struct dma_ops *ops; - struct dma_channel *channels; - - struct list_head list; - int first_channel_nr; - int first_vchannel_nr; -}; - -struct dma_chan_caps { - int ch_num; - const char **caplist; -}; - -#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev) - -/* arch/sh/drivers/dma/dma-api.c */ -extern int dma_xfer(unsigned int chan, unsigned long from, - unsigned long to, size_t size, unsigned int mode); - -#define dma_write(chan, from, to, size) \ - dma_xfer(chan, from, to, size, DMA_MODE_WRITE) -#define dma_write_page(chan, from, to) \ - dma_write(chan, from, to, PAGE_SIZE) - -#define dma_read(chan, from, to, size) \ - dma_xfer(chan, from, to, size, DMA_MODE_READ) -#define dma_read_page(chan, from, to) \ - dma_read(chan, from, to, PAGE_SIZE) - -extern int request_dma_bycap(const char **dmac, const char **caps, - const char *dev_id); -extern int request_dma(unsigned int chan, const char *dev_id); -extern void free_dma(unsigned int chan); -extern int get_dma_residue(unsigned int chan); -extern struct dma_info *get_dma_info(unsigned int chan); -extern struct dma_channel *get_dma_channel(unsigned int chan); -extern void dma_wait_for_completion(unsigned int chan); -extern void dma_configure_channel(unsigned int chan, unsigned long flags); - -extern int register_dmac(struct dma_info *info); -extern void unregister_dmac(struct dma_info *info); -extern struct dma_info *get_dma_info_by_name(const char *dmac_name); - -extern int dma_extend(unsigned int chan, unsigned long op, void *param); -extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist); - -/* arch/sh/drivers/dma/dma-sysfs.c */ -extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *); -extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *); - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_DMA_H */ diff --git a/include/asm-sh/dmabrg.h b/include/asm-sh/dmabrg.h deleted file mode 100644 index c5edba216cf1..000000000000 --- a/include/asm-sh/dmabrg.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * SH7760 DMABRG (USB/Audio) support - */ - -#ifndef _DMABRG_H_ -#define _DMABRG_H_ - -/* IRQ sources */ -#define DMABRGIRQ_USBDMA 0 -#define DMABRGIRQ_USBDMAERR 1 -#define DMABRGIRQ_A0TXF 2 -#define DMABRGIRQ_A0TXH 3 -#define DMABRGIRQ_A0RXF 4 -#define DMABRGIRQ_A0RXH 5 -#define DMABRGIRQ_A1TXF 6 -#define DMABRGIRQ_A1TXH 7 -#define DMABRGIRQ_A1RXF 8 -#define DMABRGIRQ_A1RXH 9 - -extern int dmabrg_request_irq(unsigned int, void(*)(void *), void *); -extern void dmabrg_free_irq(unsigned int); - -#endif diff --git a/include/asm-sh/dreamcast/dma.h b/include/asm-sh/dreamcast/dma.h deleted file mode 100644 index ddd68e788705..000000000000 --- a/include/asm-sh/dreamcast/dma.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * include/asm-sh/dreamcast/dma.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_DREAMCAST_DMA_H -#define __ASM_SH_DREAMCAST_DMA_H - -/* Number of DMA channels */ -#define ONCHIP_NR_DMA_CHANNELS 4 -#define G2_NR_DMA_CHANNELS 4 -#define PVR2_NR_DMA_CHANNELS 1 - -/* Channels for cascading */ -#define PVR2_CASCADE_CHAN 2 -#define G2_CASCADE_CHAN 3 - -/* PVR2 DMA Registers */ -#define PVR2_DMA_BASE 0xa05f6800 -#define PVR2_DMA_ADDR (PVR2_DMA_BASE + 0) -#define PVR2_DMA_COUNT (PVR2_DMA_BASE + 4) -#define PVR2_DMA_MODE (PVR2_DMA_BASE + 8) -#define PVR2_DMA_LMMODE0 (PVR2_DMA_BASE + 132) -#define PVR2_DMA_LMMODE1 (PVR2_DMA_BASE + 136) - -/* G2 DMA Register */ -#define G2_DMA_BASE 0xa05f7800 - -#endif /* __ASM_SH_DREAMCAST_DMA_H */ - diff --git a/include/asm-sh/dreamcast/maple.h b/include/asm-sh/dreamcast/maple.h deleted file mode 100644 index 51f6a87f1f11..000000000000 --- a/include/asm-sh/dreamcast/maple.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef __ASM_MAPLE_H -#define __ASM_MAPLE_H - -#define MAPLE_PORTS 4 -#define MAPLE_PNP_INTERVAL HZ -#define MAPLE_MAXPACKETS 8 -#define MAPLE_DMA_ORDER 14 -#define MAPLE_DMA_SIZE (1 << MAPLE_DMA_ORDER) -#define MAPLE_DMA_PAGES ((MAPLE_DMA_ORDER > PAGE_SHIFT) ? \ - MAPLE_DMA_ORDER - PAGE_SHIFT : 0) - -/* Maple Bus registers */ -#define MAPLE_BASE 0xa05f6c00 -#define MAPLE_DMAADDR (MAPLE_BASE+0x04) -#define MAPLE_TRIGTYPE (MAPLE_BASE+0x10) -#define MAPLE_ENABLE (MAPLE_BASE+0x14) -#define MAPLE_STATE (MAPLE_BASE+0x18) -#define MAPLE_SPEED (MAPLE_BASE+0x80) -#define MAPLE_RESET (MAPLE_BASE+0x8c) - -#define MAPLE_MAGIC 0x6155404f -#define MAPLE_2MBPS 0 -#define MAPLE_TIMEOUT(n) ((n)<<15) - -/* Function codes */ -#define MAPLE_FUNC_CONTROLLER 0x001 -#define MAPLE_FUNC_MEMCARD 0x002 -#define MAPLE_FUNC_LCD 0x004 -#define MAPLE_FUNC_CLOCK 0x008 -#define MAPLE_FUNC_MICROPHONE 0x010 -#define MAPLE_FUNC_ARGUN 0x020 -#define MAPLE_FUNC_KEYBOARD 0x040 -#define MAPLE_FUNC_LIGHTGUN 0x080 -#define MAPLE_FUNC_PURUPURU 0x100 -#define MAPLE_FUNC_MOUSE 0x200 - -#endif /* __ASM_MAPLE_H */ diff --git a/include/asm-sh/dreamcast/pci.h b/include/asm-sh/dreamcast/pci.h deleted file mode 100644 index e401b24b0d8e..000000000000 --- a/include/asm-sh/dreamcast/pci.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * include/asm-sh/dreamcast/pci.h - * - * Copyright (C) 2001, 2002 M. R. Brown - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_DREAMCAST_PCI_H -#define __ASM_SH_DREAMCAST_PCI_H - -#include - -#define GAPSPCI_REGS 0x01001400 -#define GAPSPCI_DMA_BASE 0x01840000 -#define GAPSPCI_DMA_SIZE 32768 -#define GAPSPCI_BBA_CONFIG 0x01001600 -#define GAPSPCI_BBA_CONFIG_SIZE 0x2000 - -#define GAPSPCI_IRQ HW_EVENT_EXTERNAL - -#endif /* __ASM_SH_DREAMCAST_PCI_H */ - diff --git a/include/asm-sh/dreamcast/sysasic.h b/include/asm-sh/dreamcast/sysasic.h deleted file mode 100644 index f33426608a87..000000000000 --- a/include/asm-sh/dreamcast/sysasic.h +++ /dev/null @@ -1,43 +0,0 @@ -/* include/asm-sh/dreamcast/sysasic.h - * - * Definitions for the Dreamcast System ASIC and related peripherals. - * - * Copyright (c) 2001 M. R. Brown - * Copyright (C) 2003 Paul Mundt - * - * This file is part of the LinuxDC project (www.linuxdc.org) - * - * Released under the terms of the GNU GPL v2.0. - * - */ -#ifndef __ASM_SH_DREAMCAST_SYSASIC_H -#define __ASM_SH_DREAMCAST_SYSASIC_H - -#include - -/* Hardware events - - - Each of these events correspond to a bit within the Event Mask Registers/ - Event Status Registers. Because of the virtual IRQ numbering scheme, a - base offset must be used when calculating the virtual IRQ that each event - takes. -*/ - -#define HW_EVENT_IRQ_BASE 48 - -/* IRQ 13 */ -#define HW_EVENT_VSYNC (HW_EVENT_IRQ_BASE + 5) /* VSync */ -#define HW_EVENT_MAPLE_DMA (HW_EVENT_IRQ_BASE + 12) /* Maple DMA complete */ -#define HW_EVENT_GDROM_DMA (HW_EVENT_IRQ_BASE + 14) /* GD-ROM DMA complete */ -#define HW_EVENT_G2_DMA (HW_EVENT_IRQ_BASE + 15) /* G2 DMA complete */ -#define HW_EVENT_PVR2_DMA (HW_EVENT_IRQ_BASE + 19) /* PVR2 DMA complete */ - -/* IRQ 11 */ -#define HW_EVENT_GDROM_CMD (HW_EVENT_IRQ_BASE + 32) /* GD-ROM cmd. complete */ -#define HW_EVENT_AICA_SYS (HW_EVENT_IRQ_BASE + 33) /* AICA-related */ -#define HW_EVENT_EXTERNAL (HW_EVENT_IRQ_BASE + 35) /* Ext. (expansion) */ - -#define HW_EVENT_IRQ_MAX (HW_EVENT_IRQ_BASE + 95) - -#endif /* __ASM_SH_DREAMCAST_SYSASIC_H */ - diff --git a/include/asm-sh/edosk7705.h b/include/asm-sh/edosk7705.h deleted file mode 100644 index 5bdc9d9be3de..000000000000 --- a/include/asm-sh/edosk7705.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * include/asm-sh/edosk7705.h - * - * Modified version of io_se.h for the EDOSK7705 specific functions. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for an Hitachi EDOSK7705 development board - */ - -#ifndef __ASM_SH_EDOSK7705_IO_H -#define __ASM_SH_EDOSK7705_IO_H - -#include - -extern unsigned char sh_edosk7705_inb(unsigned long port); -extern unsigned int sh_edosk7705_inl(unsigned long port); - -extern void sh_edosk7705_outb(unsigned char value, unsigned long port); -extern void sh_edosk7705_outl(unsigned int value, unsigned long port); - -extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count); -extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count); -extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count); -extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count); - -extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset); - -#endif /* __ASM_SH_EDOSK7705_IO_H */ diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h deleted file mode 100644 index f01449a8d378..000000000000 --- a/include/asm-sh/elf.h +++ /dev/null @@ -1,244 +0,0 @@ -#ifndef __ASM_SH_ELF_H -#define __ASM_SH_ELF_H - -#include -#include -#include -#include - -/* ELF header e_flags defines */ -#define EF_SH_PIC 0x100 /* -fpic */ -#define EF_SH_FDPIC 0x8000 /* -mfdpic */ - -/* SH (particularly SHcompact) relocation types */ -#define R_SH_NONE 0 -#define R_SH_DIR32 1 -#define R_SH_REL32 2 -#define R_SH_DIR8WPN 3 -#define R_SH_IND12W 4 -#define R_SH_DIR8WPL 5 -#define R_SH_DIR8WPZ 6 -#define R_SH_DIR8BP 7 -#define R_SH_DIR8W 8 -#define R_SH_DIR8L 9 -#define R_SH_SWITCH16 25 -#define R_SH_SWITCH32 26 -#define R_SH_USES 27 -#define R_SH_COUNT 28 -#define R_SH_ALIGN 29 -#define R_SH_CODE 30 -#define R_SH_DATA 31 -#define R_SH_LABEL 32 -#define R_SH_SWITCH8 33 -#define R_SH_GNU_VTINHERIT 34 -#define R_SH_GNU_VTENTRY 35 -#define R_SH_TLS_GD_32 144 -#define R_SH_TLS_LD_32 145 -#define R_SH_TLS_LDO_32 146 -#define R_SH_TLS_IE_32 147 -#define R_SH_TLS_LE_32 148 -#define R_SH_TLS_DTPMOD32 149 -#define R_SH_TLS_DTPOFF32 150 -#define R_SH_TLS_TPOFF32 151 -#define R_SH_GOT32 160 -#define R_SH_PLT32 161 -#define R_SH_COPY 162 -#define R_SH_GLOB_DAT 163 -#define R_SH_JMP_SLOT 164 -#define R_SH_RELATIVE 165 -#define R_SH_GOTOFF 166 -#define R_SH_GOTPC 167 - -/* FDPIC relocs */ -#define R_SH_GOT20 70 -#define R_SH_GOTOFF20 71 -#define R_SH_GOTFUNCDESC 72 -#define R_SH_GOTFUNCDESC20 73 -#define R_SH_GOTOFFFUNCDESC 74 -#define R_SH_GOTOFFFUNCDESC20 75 -#define R_SH_FUNCDESC 76 -#define R_SH_FUNCDESC_VALUE 77 - -#if 0 /* XXX - later .. */ -#define R_SH_GOT20 198 -#define R_SH_GOTOFF20 199 -#define R_SH_GOTFUNCDESC 200 -#define R_SH_GOTFUNCDESC20 201 -#define R_SH_GOTOFFFUNCDESC 202 -#define R_SH_GOTOFFFUNCDESC20 203 -#define R_SH_FUNCDESC 204 -#define R_SH_FUNCDESC_VALUE 205 -#endif - -/* SHmedia relocs */ -#define R_SH_IMM_LOW16 246 -#define R_SH_IMM_LOW16_PCREL 247 -#define R_SH_IMM_MEDLOW16 248 -#define R_SH_IMM_MEDLOW16_PCREL 249 -/* Keep this the last entry. */ -#define R_SH_NUM 256 - -/* - * ELF register definitions.. - */ - -typedef unsigned long elf_greg_t; - -#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct user_fpu_struct elf_fpregset_t; - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#ifdef __LITTLE_ENDIAN__ -#define ELF_DATA ELFDATA2LSB -#else -#define ELF_DATA ELFDATA2MSB -#endif -#define ELF_ARCH EM_SH - -#ifdef __KERNEL__ -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ((x)->e_machine == EM_SH) -#define elf_check_fdpic(x) ((x)->e_flags & EF_SH_FDPIC) -#define elf_check_const_displacement(x) ((x)->e_flags & EF_SH_PIC) - -#define USE_ELF_CORE_DUMP -#define ELF_FDPIC_CORE_EFLAGS EF_SH_FDPIC -#define ELF_EXEC_PAGESIZE PAGE_SIZE - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) - -#define ELF_CORE_COPY_REGS(_dest,_regs) \ - memcpy((char *) &_dest, (char *) _regs, \ - sizeof(struct pt_regs)); - -/* This yields a mask that user programs can use to figure out what - instruction set this CPU supports. This could be done in user space, - but it's not easy, and we've already done it here. */ - -#define ELF_HWCAP (boot_cpu_data.flags) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. - - For the moment, we have only optimizations for the Intel generations, - but that could change... */ - -#define ELF_PLATFORM (utsname()->machine) - -#ifdef __SH5__ -#define ELF_PLAT_INIT(_r, load_addr) \ - do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ - _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ - _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ - _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \ - _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \ - _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \ - _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \ - _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \ - _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \ - _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \ - _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \ - _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \ - _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \ - _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \ - _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \ - _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \ - _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \ - _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \ - _r->sr = SR_FD | SR_MMU; } while (0) -#else -#define ELF_PLAT_INIT(_r, load_addr) \ - do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ - _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ - _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ - _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \ - _r->sr = SR_FD; } while (0) - -#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, \ - _dynamic_addr) \ -do { \ - _r->regs[0] = 0; \ - _r->regs[1] = 0; \ - _r->regs[2] = 0; \ - _r->regs[3] = 0; \ - _r->regs[4] = 0; \ - _r->regs[5] = 0; \ - _r->regs[6] = 0; \ - _r->regs[7] = 0; \ - _r->regs[8] = _exec_map_addr; \ - _r->regs[9] = _interp_map_addr; \ - _r->regs[10] = _dynamic_addr; \ - _r->regs[11] = 0; \ - _r->regs[12] = 0; \ - _r->regs[13] = 0; \ - _r->regs[14] = 0; \ - _r->sr = SR_FD; \ -} while (0) -#endif - -#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) -struct task_struct; -extern int dump_task_regs (struct task_struct *, elf_gregset_t *); -extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *); - -#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) -#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs) - -#ifdef CONFIG_VSYSCALL -/* vDSO has arch_setup_additional_pages */ -#define ARCH_HAS_SETUP_ADDITIONAL_PAGES -struct linux_binprm; -extern int arch_setup_additional_pages(struct linux_binprm *bprm, - int executable_stack); - -extern unsigned int vdso_enabled; -extern void __kernel_vsyscall; - -#define VDSO_BASE ((unsigned long)current->mm->context.vdso) -#define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x)) - -#define VSYSCALL_AUX_ENT \ - if (vdso_enabled) \ - NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); -#else -#define VSYSCALL_AUX_ENT -#endif /* CONFIG_VSYSCALL */ - -#ifdef CONFIG_SH_FPU -#define FPU_AUX_ENT NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT) -#else -#define FPU_AUX_ENT -#endif - -extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape; - -/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */ -#define ARCH_DLINFO \ -do { \ - /* Optional FPU initialization */ \ - FPU_AUX_ENT; \ - \ - /* Optional vsyscall entry */ \ - VSYSCALL_AUX_ENT; \ - \ - /* Cache desc */ \ - NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape); \ - NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape); \ - NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape); \ -} while (0) - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_ELF_H */ diff --git a/include/asm-sh/emergency-restart.h b/include/asm-sh/emergency-restart.h deleted file mode 100644 index 108d8c48e42e..000000000000 --- a/include/asm-sh/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-sh/entry-macros.S b/include/asm-sh/entry-macros.S deleted file mode 100644 index 2dab0b8d9454..000000000000 --- a/include/asm-sh/entry-macros.S +++ /dev/null @@ -1,33 +0,0 @@ -! entry.S macro define - - .macro cli - stc sr, r0 - or #0xf0, r0 - ldc r0, sr - .endm - - .macro sti - mov #0xf0, r11 - extu.b r11, r11 - not r11, r11 - stc sr, r10 - and r11, r10 -#ifdef CONFIG_CPU_HAS_SR_RB - stc k_g_imask, r11 - or r11, r10 -#endif - ldc r10, sr - .endm - - .macro get_current_thread_info, ti, tmp -#ifdef CONFIG_CPU_HAS_SR_RB - stc r7_bank, \ti -#else - mov #((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp - shll8 \tmp - shll2 \tmp - mov r15, \ti - and \tmp, \ti -#endif - .endm - diff --git a/include/asm-sh/errno.h b/include/asm-sh/errno.h deleted file mode 100644 index 51cf6f9cebb8..000000000000 --- a/include/asm-sh/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_ERRNO_H -#define __ASM_SH_ERRNO_H - -#include - -#endif /* __ASM_SH_ERRNO_H */ diff --git a/include/asm-sh/fb.h b/include/asm-sh/fb.h deleted file mode 100644 index d92e99cd8c8a..000000000000 --- a/include/asm-sh/fb.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ - -#include -#include -#include - -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); -} - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-sh/fcntl.h b/include/asm-sh/fcntl.h deleted file mode 100644 index 46ab12db5739..000000000000 --- a/include/asm-sh/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/fixmap.h b/include/asm-sh/fixmap.h deleted file mode 100644 index 721fcc4d5e98..000000000000 --- a/include/asm-sh/fixmap.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * fixmap.h: compile-time virtual memory allocation - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998 Ingo Molnar - * - * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 - */ - -#ifndef _ASM_FIXMAP_H -#define _ASM_FIXMAP_H - -#include -#include -#ifdef CONFIG_HIGHMEM -#include -#include -#endif - -/* - * Here we define all the compile-time 'special' virtual - * addresses. The point is to have a constant address at - * compile time, but to set the physical address only - * in the boot process. We allocate these special addresses - * from the end of P3 backwards. - * Also this lets us do fail-safe vmalloc(), we - * can guarantee that these special addresses and - * vmalloc()-ed addresses never overlap. - * - * these 'compile-time allocated' memory buffers are - * fixed-size 4k pages. (or larger if used with an increment - * highger than 1) use fixmap_set(idx,phys) to associate - * physical memory with fixmap indices. - * - * TLB entries of such buffers will not be flushed across - * task switches. - */ - -/* - * on UP currently we will have no trace of the fixmap mechanizm, - * no page table allocations, etc. This might change in the - * future, say framebuffers for the console driver(s) could be - * fix-mapped? - */ -enum fixed_addresses { -#define FIX_N_COLOURS 16 - FIX_CMAP_BEGIN, - FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS, - FIX_UNCACHED, -#ifdef CONFIG_HIGHMEM - FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ - FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, -#endif - __end_of_fixed_addresses -}; - -extern void __set_fixmap(enum fixed_addresses idx, - unsigned long phys, pgprot_t flags); - -#define set_fixmap(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL) -/* - * Some hardware wants to get fixmapped without caching. - */ -#define set_fixmap_nocache(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) -/* - * used by vmalloc.c. - * - * Leave one empty page between vmalloc'ed areas and - * the start of the fixmap, and leave one page empty - * at the top of mem.. - */ -#ifdef CONFIG_SUPERH32 -#define FIXADDR_TOP (P4SEG - PAGE_SIZE) -#else -#define FIXADDR_TOP (0xff000000 - PAGE_SIZE) -#endif -#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) -#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) - -#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) -#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) - -extern void __this_fixmap_does_not_exist(void); - -/* - * 'index to address' translation. If anyone tries to use the idx - * directly without tranlation, we catch the bug with a NULL-deference - * kernel oops. Illegal ranges of incoming indices are caught too. - */ -static inline unsigned long fix_to_virt(const unsigned int idx) -{ - /* - * this branch gets completely eliminated after inlining, - * except when someone tries to use fixaddr indices in an - * illegal way. (such as mixing up address types or using - * out-of-range indices). - * - * If it doesn't get removed, the linker will complain - * loudly with a reasonably clear error message.. - */ - if (idx >= __end_of_fixed_addresses) - __this_fixmap_does_not_exist(); - - return __fix_to_virt(idx); -} - -static inline unsigned long virt_to_fix(const unsigned long vaddr) -{ - BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); - return __virt_to_fix(vaddr); -} -#endif diff --git a/include/asm-sh/flat.h b/include/asm-sh/flat.h deleted file mode 100644 index 0cc800299e06..000000000000 --- a/include/asm-sh/flat.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * include/asm-sh/flat.h - * - * uClinux flat-format executables - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive for - * more details. - */ -#ifndef __ASM_SH_FLAT_H -#define __ASM_SH_FLAT_H - -#define flat_stack_align(sp) /* nothing needed */ -#define flat_argvp_envp_on_stack() 0 -#define flat_old_ram_flag(flags) (flags) -#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp) -#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) -#define flat_get_relocate_addr(rel) (rel) -#define flat_set_persistent(relval, p) ({ (void)p; 0; }) - -#endif /* __ASM_SH_FLAT_H */ diff --git a/include/asm-sh/fpu.h b/include/asm-sh/fpu.h deleted file mode 100644 index 91462fea1507..000000000000 --- a/include/asm-sh/fpu.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef __ASM_SH_FPU_H -#define __ASM_SH_FPU_H - -#ifndef __ASSEMBLY__ -#include -#include - -#ifdef CONFIG_SH_FPU -static inline void release_fpu(struct pt_regs *regs) -{ - regs->sr |= SR_FD; -} - -static inline void grab_fpu(struct pt_regs *regs) -{ - regs->sr &= ~SR_FD; -} - -struct task_struct; - -extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs); -#else - -#define release_fpu(regs) do { } while (0) -#define grab_fpu(regs) do { } while (0) - -static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs) -{ - clear_tsk_thread_flag(tsk, TIF_USEDFPU); -} -#endif - -extern int do_fpu_inst(unsigned short, struct pt_regs *); - -static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs) -{ - preempt_disable(); - if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) - save_fpu(tsk, regs); - preempt_enable(); -} - -static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs) -{ - preempt_disable(); - if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { - clear_tsk_thread_flag(tsk, TIF_USEDFPU); - release_fpu(regs); - } - preempt_enable(); -} - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_SH_FPU_H */ diff --git a/include/asm-sh/freq.h b/include/asm-sh/freq.h deleted file mode 100644 index 39c0e091cf58..000000000000 --- a/include/asm-sh/freq.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * include/asm-sh/freq.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __ASM_SH_FREQ_H -#define __ASM_SH_FREQ_H -#ifdef __KERNEL__ - -#include - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_FREQ_H */ diff --git a/include/asm-sh/futex-irq.h b/include/asm-sh/futex-irq.h deleted file mode 100644 index a9f16a7f9aea..000000000000 --- a/include/asm-sh/futex-irq.h +++ /dev/null @@ -1,111 +0,0 @@ -#ifndef __ASM_SH_FUTEX_IRQ_H -#define __ASM_SH_FUTEX_IRQ_H - -#include - -static inline int atomic_futex_op_xchg_set(int oparg, int __user *uaddr, - int *oldval) -{ - unsigned long flags; - int ret; - - local_irq_save(flags); - - ret = get_user(*oldval, uaddr); - if (!ret) - ret = put_user(oparg, uaddr); - - local_irq_restore(flags); - - return ret; -} - -static inline int atomic_futex_op_xchg_add(int oparg, int __user *uaddr, - int *oldval) -{ - unsigned long flags; - int ret; - - local_irq_save(flags); - - ret = get_user(*oldval, uaddr); - if (!ret) - ret = put_user(*oldval + oparg, uaddr); - - local_irq_restore(flags); - - return ret; -} - -static inline int atomic_futex_op_xchg_or(int oparg, int __user *uaddr, - int *oldval) -{ - unsigned long flags; - int ret; - - local_irq_save(flags); - - ret = get_user(*oldval, uaddr); - if (!ret) - ret = put_user(*oldval | oparg, uaddr); - - local_irq_restore(flags); - - return ret; -} - -static inline int atomic_futex_op_xchg_and(int oparg, int __user *uaddr, - int *oldval) -{ - unsigned long flags; - int ret; - - local_irq_save(flags); - - ret = get_user(*oldval, uaddr); - if (!ret) - ret = put_user(*oldval & oparg, uaddr); - - local_irq_restore(flags); - - return ret; -} - -static inline int atomic_futex_op_xchg_xor(int oparg, int __user *uaddr, - int *oldval) -{ - unsigned long flags; - int ret; - - local_irq_save(flags); - - ret = get_user(*oldval, uaddr); - if (!ret) - ret = put_user(*oldval ^ oparg, uaddr); - - local_irq_restore(flags); - - return ret; -} - -static inline int atomic_futex_op_cmpxchg_inatomic(int __user *uaddr, - int oldval, int newval) -{ - unsigned long flags; - int ret, prev = 0; - - local_irq_save(flags); - - ret = get_user(prev, uaddr); - if (!ret && oldval == prev) - ret = put_user(newval, uaddr); - - local_irq_restore(flags); - - if (ret) - return ret; - - return prev; -} - -#endif /* __ASM_SH_FUTEX_IRQ_H */ diff --git a/include/asm-sh/futex.h b/include/asm-sh/futex.h deleted file mode 100644 index 68256ec5fa35..000000000000 --- a/include/asm-sh/futex.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef __ASM_SH_FUTEX_H -#define __ASM_SH_FUTEX_H - -#ifdef __KERNEL__ - -#include -#include -#include - -/* XXX: UP variants, fix for SH-4A and SMP.. */ -#include - -static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr) -{ - int op = (encoded_op >> 28) & 7; - int cmp = (encoded_op >> 24) & 15; - int oparg = (encoded_op << 8) >> 20; - int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; - - if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) - oparg = 1 << oparg; - - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - pagefault_disable(); - - switch (op) { - case FUTEX_OP_SET: - ret = atomic_futex_op_xchg_set(oparg, uaddr, &oldval); - break; - case FUTEX_OP_ADD: - ret = atomic_futex_op_xchg_add(oparg, uaddr, &oldval); - break; - case FUTEX_OP_OR: - ret = atomic_futex_op_xchg_or(oparg, uaddr, &oldval); - break; - case FUTEX_OP_ANDN: - ret = atomic_futex_op_xchg_and(~oparg, uaddr, &oldval); - break; - case FUTEX_OP_XOR: - ret = atomic_futex_op_xchg_xor(oparg, uaddr, &oldval); - break; - default: - ret = -ENOSYS; - break; - } - - pagefault_enable(); - - if (!ret) { - switch (cmp) { - case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; - case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; - case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; - case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; - case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; - case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; - default: ret = -ENOSYS; - } - } - - return ret; -} - -static inline int -futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) -{ - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - return atomic_futex_op_cmpxchg_inatomic(uaddr, oldval, newval); -} - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_FUTEX_H */ diff --git a/include/asm-sh/gpio.h b/include/asm-sh/gpio.h deleted file mode 100644 index 9bb27e0f11a4..000000000000 --- a/include/asm-sh/gpio.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-sh/gpio.h - * - * Copyright (C) 2007 Markus Brunner, Mark Jonas - * - * Addresses for the Pin Function Controller - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_GPIO_H -#define __ASM_SH_GPIO_H - -#if defined(CONFIG_CPU_SH3) -#include -#endif - -#endif /* __ASM_SH_GPIO_H */ diff --git a/include/asm-sh/hardirq.h b/include/asm-sh/hardirq.h deleted file mode 100644 index 715ee237fc77..000000000000 --- a/include/asm-sh/hardirq.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_SH_HARDIRQ_H -#define __ASM_SH_HARDIRQ_H - -#include -#include - -/* entry.S is sensitive to the offsets of these fields */ -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -extern void ack_bad_irq(unsigned int irq); - -#endif /* __ASM_SH_HARDIRQ_H */ diff --git a/include/asm-sh/hd64461.h b/include/asm-sh/hd64461.h deleted file mode 100644 index 8c1353baf00f..000000000000 --- a/include/asm-sh/hd64461.h +++ /dev/null @@ -1,250 +0,0 @@ -#ifndef __ASM_SH_HD64461 -#define __ASM_SH_HD64461 -/* - * Copyright (C) 2007 Kristoffer Ericson - * Copyright (C) 2004 Paul Mundt - * Copyright (C) 2000 YAEGASHI Takeshi - * - * Hitachi HD64461 companion chip support - * (please note manual reference 0x10000000 = 0xb0000000) - */ - -/* Constants for PCMCIA mappings */ -#define HD64461_PCC_WINDOW 0x01000000 - -/* Area 6 - Slot 0 - memory and/or IO card */ -#define HD64461_PCC0_BASE (CONFIG_HD64461_IOBASE + 0x8000000) -#define HD64461_PCC0_ATTR (HD64461_PCC0_BASE) /* 0xb80000000 */ -#define HD64461_PCC0_COMM (HD64461_PCC0_BASE+HD64461_PCC_WINDOW) /* 0xb90000000 */ -#define HD64461_PCC0_IO (HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW) /* 0xba0000000 */ - -/* Area 5 - Slot 1 - memory card only */ -#define HD64461_PCC1_BASE (CONFIG_HD64461_IOBASE + 0x4000000) -#define HD64461_PCC1_ATTR (HD64461_PCC1_BASE) /* 0xb4000000 */ -#define HD64461_PCC1_COMM (HD64461_PCC1_BASE+HD64461_PCC_WINDOW) /* 0xb5000000 */ - -/* Standby Control Register for HD64461 */ -#define HD64461_STBCR CONFIG_HD64461_IOBASE -#define HD64461_STBCR_CKIO_STBY 0x2000 -#define HD64461_STBCR_SAFECKE_IST 0x1000 -#define HD64461_STBCR_SLCKE_IST 0x0800 -#define HD64461_STBCR_SAFECKE_OST 0x0400 -#define HD64461_STBCR_SLCKE_OST 0x0200 -#define HD64461_STBCR_SMIAST 0x0100 -#define HD64461_STBCR_SLCDST 0x0080 -#define HD64461_STBCR_SPC0ST 0x0040 -#define HD64461_STBCR_SPC1ST 0x0020 -#define HD64461_STBCR_SAFEST 0x0010 -#define HD64461_STBCR_STM0ST 0x0008 -#define HD64461_STBCR_STM1ST 0x0004 -#define HD64461_STBCR_SIRST 0x0002 -#define HD64461_STBCR_SURTST 0x0001 - -/* System Configuration Register */ -#define HD64461_SYSCR (CONFIG_HD64461_IOBASE + 0x02) - -/* CPU Data Bus Control Register */ -#define HD64461_SCPUCR (CONFIG_HD64461_IOBASE + 0x04) - -/* Base Address Register */ -#define HD64461_LCDCBAR (CONFIG_HD64461_IOBASE + 0x1000) - -/* Line increment address */ -#define HD64461_LCDCLOR (CONFIG_HD64461_IOBASE + 0x1002) - -/* Controls LCD controller */ -#define HD64461_LCDCCR (CONFIG_HD64461_IOBASE + 0x1004) - -/* LCCDR control bits */ -#define HD64461_LCDCCR_STBACK 0x0400 /* Standby Back */ -#define HD64461_LCDCCR_STREQ 0x0100 /* Standby Request */ -#define HD64461_LCDCCR_MOFF 0x0080 /* Memory Off */ -#define HD64461_LCDCCR_REFSEL 0x0040 /* Refresh Select */ -#define HD64461_LCDCCR_EPON 0x0020 /* End Power On */ -#define HD64461_LCDCCR_SPON 0x0010 /* Start Power On */ - -/* Controls LCD (1) */ -#define HD64461_LDR1 (CONFIG_HD64461_IOBASE + 0x1010) -#define HD64461_LDR1_DON 0x01 /* Display On */ -#define HD64461_LDR1_DINV 0x80 /* Display Invert */ - -/* Controls LCD (2) */ -#define HD64461_LDR2 (CONFIG_HD64461_IOBASE + 0x1012) -#define HD64461_LDHNCR (CONFIG_HD64461_IOBASE + 0x1014) /* Number of horizontal characters */ -#define HD64461_LDHNSR (CONFIG_HD64461_IOBASE + 0x1016) /* Specify output start position + width of CL1 */ -#define HD64461_LDVNTR (CONFIG_HD64461_IOBASE + 0x1018) /* Specify total vertical lines */ -#define HD64461_LDVNDR (CONFIG_HD64461_IOBASE + 0x101a) /* specify number of display vertical lines */ -#define HD64461_LDVSPR (CONFIG_HD64461_IOBASE + 0x101c) /* specify vertical synchronization pos and AC nr */ - -/* Controls LCD (3) */ -#define HD64461_LDR3 (CONFIG_HD64461_IOBASE + 0x101e) - -/* Palette Registers */ -#define HD64461_CPTWAR (CONFIG_HD64461_IOBASE + 0x1030) /* Color Palette Write Address Register */ -#define HD64461_CPTWDR (CONFIG_HD64461_IOBASE + 0x1032) /* Color Palette Write Data Register */ -#define HD64461_CPTRAR (CONFIG_HD64461_IOBASE + 0x1034) /* Color Palette Read Address Register */ -#define HD64461_CPTRDR (CONFIG_HD64461_IOBASE + 0x1036) /* Color Palette Read Data Register */ - -#define HD64461_GRDOR (CONFIG_HD64461_IOBASE + 0x1040) /* Display Resolution Offset Register */ -#define HD64461_GRSCR (CONFIG_HD64461_IOBASE + 0x1042) /* Solid Color Register */ -#define HD64461_GRCFGR (CONFIG_HD64461_IOBASE + 0x1044) /* Accelerator Configuration Register */ - -#define HD64461_GRCFGR_ACCSTATUS 0x10 /* Accelerator Status */ -#define HD64461_GRCFGR_ACCRESET 0x08 /* Accelerator Reset */ -#define HD64461_GRCFGR_ACCSTART_BITBLT 0x06 /* Accelerator Start BITBLT */ -#define HD64461_GRCFGR_ACCSTART_LINE 0x04 /* Accelerator Start Line Drawing */ -#define HD64461_GRCFGR_COLORDEPTH16 0x01 /* Sets Colordepth 16 for Accelerator */ -#define HD64461_GRCFGR_COLORDEPTH8 0x01 /* Sets Colordepth 8 for Accelerator */ - -/* Line Drawing Registers */ -#define HD64461_LNSARH (CONFIG_HD64461_IOBASE + 0x1046) /* Line Start Address Register (H) */ -#define HD64461_LNSARL (CONFIG_HD64461_IOBASE + 0x1048) /* Line Start Address Register (L) */ -#define HD64461_LNAXLR (CONFIG_HD64461_IOBASE + 0x104a) /* Axis Pixel Length Register */ -#define HD64461_LNDGR (CONFIG_HD64461_IOBASE + 0x104c) /* Diagonal Register */ -#define HD64461_LNAXR (CONFIG_HD64461_IOBASE + 0x104e) /* Axial Register */ -#define HD64461_LNERTR (CONFIG_HD64461_IOBASE + 0x1050) /* Start Error Term Register */ -#define HD64461_LNMDR (CONFIG_HD64461_IOBASE + 0x1052) /* Line Mode Register */ - -/* BitBLT Registers */ -#define HD64461_BBTSSARH (CONFIG_HD64461_IOBASE + 0x1054) /* Source Start Address Register (H) */ -#define HD64461_BBTSSARL (CONFIG_HD64461_IOBASE + 0x1056) /* Source Start Address Register (L) */ -#define HD64461_BBTDSARH (CONFIG_HD64461_IOBASE + 0x1058) /* Destination Start Address Register (H) */ -#define HD64461_BBTDSARL (CONFIG_HD64461_IOBASE + 0x105a) /* Destination Start Address Register (L) */ -#define HD64461_BBTDWR (CONFIG_HD64461_IOBASE + 0x105c) /* Destination Block Width Register */ -#define HD64461_BBTDHR (CONFIG_HD64461_IOBASE + 0x105e) /* Destination Block Height Register */ -#define HD64461_BBTPARH (CONFIG_HD64461_IOBASE + 0x1060) /* Pattern Start Address Register (H) */ -#define HD64461_BBTPARL (CONFIG_HD64461_IOBASE + 0x1062) /* Pattern Start Address Register (L) */ -#define HD64461_BBTMARH (CONFIG_HD64461_IOBASE + 0x1064) /* Mask Start Address Register (H) */ -#define HD64461_BBTMARL (CONFIG_HD64461_IOBASE + 0x1066) /* Mask Start Address Register (L) */ -#define HD64461_BBTROPR (CONFIG_HD64461_IOBASE + 0x1068) /* ROP Register */ -#define HD64461_BBTMDR (CONFIG_HD64461_IOBASE + 0x106a) /* BitBLT Mode Register */ - -/* PC Card Controller Registers */ -/* Maps to Physical Area 6 */ -#define HD64461_PCC0ISR (CONFIG_HD64461_IOBASE + 0x2000) /* socket 0 interface status */ -#define HD64461_PCC0GCR (CONFIG_HD64461_IOBASE + 0x2002) /* socket 0 general control */ -#define HD64461_PCC0CSCR (CONFIG_HD64461_IOBASE + 0x2004) /* socket 0 card status change */ -#define HD64461_PCC0CSCIER (CONFIG_HD64461_IOBASE + 0x2006) /* socket 0 card status change interrupt enable */ -#define HD64461_PCC0SCR (CONFIG_HD64461_IOBASE + 0x2008) /* socket 0 software control */ -/* Maps to Physical Area 5 */ -#define HD64461_PCC1ISR (CONFIG_HD64461_IOBASE + 0x2010) /* socket 1 interface status */ -#define HD64461_PCC1GCR (CONFIG_HD64461_IOBASE + 0x2012) /* socket 1 general control */ -#define HD64461_PCC1CSCR (CONFIG_HD64461_IOBASE + 0x2014) /* socket 1 card status change */ -#define HD64461_PCC1CSCIER (CONFIG_HD64461_IOBASE + 0x2016) /* socket 1 card status change interrupt enable */ -#define HD64461_PCC1SCR (CONFIG_HD64461_IOBASE + 0x2018) /* socket 1 software control */ - -/* PCC Interface Status Register */ -#define HD64461_PCCISR_READY 0x80 /* card ready */ -#define HD64461_PCCISR_MWP 0x40 /* card write-protected */ -#define HD64461_PCCISR_VS2 0x20 /* voltage select pin 2 */ -#define HD64461_PCCISR_VS1 0x10 /* voltage select pin 1 */ -#define HD64461_PCCISR_CD2 0x08 /* card detect 2 */ -#define HD64461_PCCISR_CD1 0x04 /* card detect 1 */ -#define HD64461_PCCISR_BVD2 0x02 /* battery 1 */ -#define HD64461_PCCISR_BVD1 0x01 /* battery 1 */ - -#define HD64461_PCCISR_PCD_MASK 0x0c /* card detect */ -#define HD64461_PCCISR_BVD_MASK 0x03 /* battery voltage */ -#define HD64461_PCCISR_BVD_BATGOOD 0x03 /* battery good */ -#define HD64461_PCCISR_BVD_BATWARN 0x01 /* battery low warning */ -#define HD64461_PCCISR_BVD_BATDEAD1 0x02 /* battery dead */ -#define HD64461_PCCISR_BVD_BATDEAD2 0x00 /* battery dead */ - -/* PCC General Control Register */ -#define HD64461_PCCGCR_DRVE 0x80 /* output drive */ -#define HD64461_PCCGCR_PCCR 0x40 /* PC card reset */ -#define HD64461_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */ -#define HD64461_PCCGCR_VCC0 0x10 /* voltage control pin VCC0SEL0 */ -#define HD64461_PCCGCR_PMMOD 0x08 /* memory mode */ -#define HD64461_PCCGCR_PA25 0x04 /* pin A25 */ -#define HD64461_PCCGCR_PA24 0x02 /* pin A24 */ -#define HD64461_PCCGCR_REG 0x01 /* pin PCC0REG# */ - -/* PCC Card Status Change Register */ -#define HD64461_PCCCSCR_SCDI 0x80 /* sw card detect intr */ -#define HD64461_PCCCSCR_SRV1 0x40 /* reserved */ -#define HD64461_PCCCSCR_IREQ 0x20 /* IREQ intr req */ -#define HD64461_PCCCSCR_SC 0x10 /* STSCHG (status change) pin */ -#define HD64461_PCCCSCR_CDC 0x08 /* CD (card detect) change */ -#define HD64461_PCCCSCR_RC 0x04 /* READY change */ -#define HD64461_PCCCSCR_BW 0x02 /* battery warning change */ -#define HD64461_PCCCSCR_BD 0x01 /* battery dead change */ - -/* PCC Card Status Change Interrupt Enable Register */ -#define HD64461_PCCCSCIER_CRE 0x80 /* change reset enable */ -#define HD64461_PCCCSCIER_IREQE_MASK 0x60 /* IREQ enable */ -#define HD64461_PCCCSCIER_IREQE_DISABLED 0x00 /* IREQ disabled */ -#define HD64461_PCCCSCIER_IREQE_LEVEL 0x20 /* IREQ level-triggered */ -#define HD64461_PCCCSCIER_IREQE_FALLING 0x40 /* IREQ falling-edge-trig */ -#define HD64461_PCCCSCIER_IREQE_RISING 0x60 /* IREQ rising-edge-trig */ - -#define HD64461_PCCCSCIER_SCE 0x10 /* status change enable */ -#define HD64461_PCCCSCIER_CDE 0x08 /* card detect change enable */ -#define HD64461_PCCCSCIER_RE 0x04 /* ready change enable */ -#define HD64461_PCCCSCIER_BWE 0x02 /* battery warn change enable */ -#define HD64461_PCCCSCIER_BDE 0x01 /* battery dead change enable*/ - -/* PCC Software Control Register */ -#define HD64461_PCCSCR_VCC1 0x02 /* voltage control pin 1 */ -#define HD64461_PCCSCR_SWP 0x01 /* write protect */ - -/* PCC0 Output Pins Control Register */ -#define HD64461_P0OCR (CONFIG_HD64461_IOBASE + 0x202a) - -/* PCC1 Output Pins Control Register */ -#define HD64461_P1OCR (CONFIG_HD64461_IOBASE + 0x202c) - -/* PC Card General Control Register */ -#define HD64461_PGCR (CONFIG_HD64461_IOBASE + 0x202e) - -/* Port Control Registers */ -#define HD64461_GPACR (CONFIG_HD64461_IOBASE + 0x4000) /* Port A - Handles IRDA/TIMER */ -#define HD64461_GPBCR (CONFIG_HD64461_IOBASE + 0x4002) /* Port B - Handles UART */ -#define HD64461_GPCCR (CONFIG_HD64461_IOBASE + 0x4004) /* Port C - Handles PCMCIA 1 */ -#define HD64461_GPDCR (CONFIG_HD64461_IOBASE + 0x4006) /* Port D - Handles PCMCIA 1 */ - -/* Port Control Data Registers */ -#define HD64461_GPADR (CONFIG_HD64461_IOBASE + 0x4010) /* A */ -#define HD64461_GPBDR (CONFIG_HD64461_IOBASE + 0x4012) /* B */ -#define HD64461_GPCDR (CONFIG_HD64461_IOBASE + 0x4014) /* C */ -#define HD64461_GPDDR (CONFIG_HD64461_IOBASE + 0x4016) /* D */ - -/* Interrupt Control Registers */ -#define HD64461_GPAICR (CONFIG_HD64461_IOBASE + 0x4020) /* A */ -#define HD64461_GPBICR (CONFIG_HD64461_IOBASE + 0x4022) /* B */ -#define HD64461_GPCICR (CONFIG_HD64461_IOBASE + 0x4024) /* C */ -#define HD64461_GPDICR (CONFIG_HD64461_IOBASE + 0x4026) /* D */ - -/* Interrupt Status Registers */ -#define HD64461_GPAISR (CONFIG_HD64461_IOBASE + 0x4040) /* A */ -#define HD64461_GPBISR (CONFIG_HD64461_IOBASE + 0x4042) /* B */ -#define HD64461_GPCISR (CONFIG_HD64461_IOBASE + 0x4044) /* C */ -#define HD64461_GPDISR (CONFIG_HD64461_IOBASE + 0x4046) /* D */ - -/* Interrupt Request Register & Interrupt Mask Register */ -#define HD64461_NIRR (CONFIG_HD64461_IOBASE + 0x5000) -#define HD64461_NIMR (CONFIG_HD64461_IOBASE + 0x5002) - -#define HD64461_IRQBASE OFFCHIP_IRQ_BASE -#define OFFCHIP_IRQ_BASE 64 -#define HD64461_IRQ_NUM 16 - -#define HD64461_IRQ_UART (HD64461_IRQBASE+5) -#define HD64461_IRQ_IRDA (HD64461_IRQBASE+6) -#define HD64461_IRQ_TMU1 (HD64461_IRQBASE+9) -#define HD64461_IRQ_TMU0 (HD64461_IRQBASE+10) -#define HD64461_IRQ_GPIO (HD64461_IRQBASE+11) -#define HD64461_IRQ_AFE (HD64461_IRQBASE+12) -#define HD64461_IRQ_PCC1 (HD64461_IRQBASE+13) -#define HD64461_IRQ_PCC0 (HD64461_IRQBASE+14) - -#define __IO_PREFIX hd64461 -#include - -/* arch/sh/cchips/hd6446x/hd64461/setup.c */ -int hd64461_irq_demux(int irq); -void hd64461_register_irq_demux(int irq, - int (*demux) (int irq, void *dev), void *dev); -void hd64461_unregister_irq_demux(int irq); - -#endif diff --git a/include/asm-sh/hd64465/gpio.h b/include/asm-sh/hd64465/gpio.h deleted file mode 100644 index a3cdca2713dd..000000000000 --- a/include/asm-sh/hd64465/gpio.h +++ /dev/null @@ -1,46 +0,0 @@ -#ifndef _ASM_SH_HD64465_GPIO_ -#define _ASM_SH_HD64465_GPIO_ 1 -/* - * $Id: gpio.h,v 1.3 2003/05/04 19:30:14 lethal Exp $ - * - * Hitachi HD64465 companion chip: General Purpose IO pins support. - * This layer enables other device drivers to configure GPIO - * pins, get and set their values, and register an interrupt - * routine for when input pins change in hardware. - * - * by Greg Banks - * (c) 2000 PocketPenguins Inc. - */ -#include - -/* Macro to construct a portpin number (used in all - * subsequent functions) from a port letter and a pin - * number, e.g. HD64465_GPIO_PORTPIN('A', 5). - */ -#define HD64465_GPIO_PORTPIN(port,pin) (((port)-'A')<<3|(pin)) - -/* Pin configuration constants for _configure() */ -#define HD64465_GPIO_FUNCTION2 0 /* use the pin's *other* function */ -#define HD64465_GPIO_OUT 1 /* output */ -#define HD64465_GPIO_IN_PULLUP 2 /* input, pull-up MOS on */ -#define HD64465_GPIO_IN 3 /* input */ - -/* Configure a pin's direction */ -extern void hd64465_gpio_configure(int portpin, int direction); - -/* Get, set value */ -extern void hd64465_gpio_set_pin(int portpin, unsigned int value); -extern unsigned int hd64465_gpio_get_pin(int portpin); -extern void hd64465_gpio_set_port(int port, unsigned int value); -extern unsigned int hd64465_gpio_get_port(int port); - -/* mode constants for _register_irq() */ -#define HD64465_GPIO_FALLING 0 -#define HD64465_GPIO_RISING 1 - -/* Interrupt on external value change */ -extern void hd64465_gpio_register_irq(int portpin, int mode, - void (*handler)(int portpin, void *dev), void *dev); -extern void hd64465_gpio_unregister_irq(int portpin); - -#endif /* _ASM_SH_HD64465_GPIO_ */ diff --git a/include/asm-sh/hd64465/hd64465.h b/include/asm-sh/hd64465/hd64465.h deleted file mode 100644 index cfd0e803d2a2..000000000000 --- a/include/asm-sh/hd64465/hd64465.h +++ /dev/null @@ -1,256 +0,0 @@ -#ifndef _ASM_SH_HD64465_ -#define _ASM_SH_HD64465_ 1 -/* - * $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $ - * - * Hitachi HD64465 companion chip support - * - * by Greg Banks - * (c) 2000 PocketPenguins Inc. - * - * Derived from which bore the message: - * Copyright (C) 2000 YAEGASHI Takeshi - */ -#include -#include - -/* - * Note that registers are defined here as virtual port numbers, - * which have no meaning except to get translated by hd64465_isa_port2addr() - * to an address in the range 0xb0000000-0xb3ffffff. Note that - * this translation happens to consist of adding the lower 16 bits - * of the virtual port number to 0xb0000000. Note also that the manual - * shows addresses as absolute physical addresses starting at 0x10000000, - * so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the - * manual, and accessed using address 0xb0005000 - Greg. - */ - -/* System registers */ -#define HD64465_REG_SRR 0x1000c /* System Revision Register */ -#define HD64465_REG_SDID 0x10010 /* System Device ID Reg */ -#define HD64465_SDID 0x8122 /* 64465 device ID */ - -/* Power Management registers */ -#define HD64465_REG_SMSCR 0x10000 /* System Module Standby Control Reg */ -#define HD64465_SMSCR_PS2ST 0x4000 /* PS/2 Standby */ -#define HD64465_SMSCR_ADCST 0x1000 /* ADC Standby */ -#define HD64465_SMSCR_UARTST 0x0800 /* UART Standby */ -#define HD64465_SMSCR_SCDIST 0x0200 /* Serial Codec Standby */ -#define HD64465_SMSCR_PPST 0x0100 /* Parallel Port Standby */ -#define HD64465_SMSCR_PC0ST 0x0040 /* PCMCIA0 Standby */ -#define HD64465_SMSCR_PC1ST 0x0020 /* PCMCIA1 Standby */ -#define HD64465_SMSCR_AFEST 0x0010 /* AFE Standby */ -#define HD64465_SMSCR_TM0ST 0x0008 /* Timer0 Standby */ -#define HD64465_SMSCR_TM1ST 0x0004 /* Timer1 Standby */ -#define HD64465_SMSCR_IRDAST 0x0002 /* IRDA Standby */ -#define HD64465_SMSCR_KBCST 0x0001 /* Keyboard Controller Standby */ - -/* Interrupt Controller registers */ -#define HD64465_REG_NIRR 0x15000 /* Interrupt Request Register */ -#define HD64465_REG_NIMR 0x15002 /* Interrupt Mask Register */ -#define HD64465_REG_NITR 0x15004 /* Interrupt Trigger Mode Register */ - -/* Timer registers */ -#define HD64465_REG_TCVR1 0x16000 /* Timer 1 constant value register */ -#define HD64465_REG_TCVR0 0x16002 /* Timer 0 constant value register */ -#define HD64465_REG_TRVR1 0x16004 /* Timer 1 read value register */ -#define HD64465_REG_TRVR0 0x16006 /* Timer 0 read value register */ -#define HD64465_REG_TCR1 0x16008 /* Timer 1 control register */ -#define HD64465_REG_TCR0 0x1600A /* Timer 0 control register */ -#define HD64465_TCR_EADT 0x10 /* Enable ADTRIG# signal */ -#define HD64465_TCR_ETMO 0x08 /* Enable TMO signal */ -#define HD64465_TCR_PST_MASK 0x06 /* Clock Prescale */ -#define HD64465_TCR_PST_1 0x06 /* 1:1 */ -#define HD64465_TCR_PST_4 0x04 /* 1:4 */ -#define HD64465_TCR_PST_8 0x02 /* 1:8 */ -#define HD64465_TCR_PST_16 0x00 /* 1:16 */ -#define HD64465_TCR_TSTP 0x01 /* Start/Stop timer */ -#define HD64465_REG_TIRR 0x1600C /* Timer interrupt request register */ -#define HD64465_REG_TIDR 0x1600E /* Timer interrupt disable register */ -#define HD64465_REG_PWM1CS 0x16010 /* PWM 1 clock scale register */ -#define HD64465_REG_PWM1LPC 0x16012 /* PWM 1 low pulse width counter register */ -#define HD64465_REG_PWM1HPC 0x16014 /* PWM 1 high pulse width counter register */ -#define HD64465_REG_PWM0CS 0x16018 /* PWM 0 clock scale register */ -#define HD64465_REG_PWM0LPC 0x1601A /* PWM 0 low pulse width counter register */ -#define HD64465_REG_PWM0HPC 0x1601C /* PWM 0 high pulse width counter register */ - -/* Analog/Digital Converter registers */ -#define HD64465_REG_ADDRA 0x1E000 /* A/D data register A */ -#define HD64465_REG_ADDRB 0x1E002 /* A/D data register B */ -#define HD64465_REG_ADDRC 0x1E004 /* A/D data register C */ -#define HD64465_REG_ADDRD 0x1E006 /* A/D data register D */ -#define HD64465_REG_ADCSR 0x1E008 /* A/D control/status register */ -#define HD64465_ADCSR_ADF 0x80 /* A/D End Flag */ -#define HD64465_ADCSR_ADST 0x40 /* A/D Start Flag */ -#define HD64465_ADCSR_ADIS 0x20 /* A/D Interrupt Status */ -#define HD64465_ADCSR_TRGE 0x10 /* A/D Trigger Enable */ -#define HD64465_ADCSR_ADIE 0x08 /* A/D Interrupt Enable */ -#define HD64465_ADCSR_SCAN 0x04 /* A/D Scan Mode */ -#define HD64465_ADCSR_CH_MASK 0x03 /* A/D Channel */ -#define HD64465_REG_ADCALCR 0x1E00A /* A/D calibration sample control */ -#define HD64465_REG_ADCAL 0x1E00C /* A/D calibration data register */ - - -/* General Purpose I/O ports registers */ -#define HD64465_REG_GPACR 0x14000 /* Port A Control Register */ -#define HD64465_REG_GPBCR 0x14002 /* Port B Control Register */ -#define HD64465_REG_GPCCR 0x14004 /* Port C Control Register */ -#define HD64465_REG_GPDCR 0x14006 /* Port D Control Register */ -#define HD64465_REG_GPECR 0x14008 /* Port E Control Register */ -#define HD64465_REG_GPADR 0x14010 /* Port A Data Register */ -#define HD64465_REG_GPBDR 0x14012 /* Port B Data Register */ -#define HD64465_REG_GPCDR 0x14014 /* Port C Data Register */ -#define HD64465_REG_GPDDR 0x14016 /* Port D Data Register */ -#define HD64465_REG_GPEDR 0x14018 /* Port E Data Register */ -#define HD64465_REG_GPAICR 0x14020 /* Port A Interrupt Control Register */ -#define HD64465_REG_GPBICR 0x14022 /* Port B Interrupt Control Register */ -#define HD64465_REG_GPCICR 0x14024 /* Port C Interrupt Control Register */ -#define HD64465_REG_GPDICR 0x14026 /* Port D Interrupt Control Register */ -#define HD64465_REG_GPEICR 0x14028 /* Port E Interrupt Control Register */ -#define HD64465_REG_GPAISR 0x14040 /* Port A Interrupt Status Register */ -#define HD64465_REG_GPBISR 0x14042 /* Port B Interrupt Status Register */ -#define HD64465_REG_GPCISR 0x14044 /* Port C Interrupt Status Register */ -#define HD64465_REG_GPDISR 0x14046 /* Port D Interrupt Status Register */ -#define HD64465_REG_GPEISR 0x14048 /* Port E Interrupt Status Register */ - -/* PCMCIA bridge interface */ -#define HD64465_REG_PCC0ISR 0x12000 /* socket 0 interface status */ -#define HD64465_PCCISR_PREADY 0x80 /* mem card ready / io card IREQ */ -#define HD64465_PCCISR_PIREQ 0x80 -#define HD64465_PCCISR_PMWP 0x40 /* mem card write-protected */ -#define HD64465_PCCISR_PVS2 0x20 /* voltage select pin 2 */ -#define HD64465_PCCISR_PVS1 0x10 /* voltage select pin 1 */ -#define HD64465_PCCISR_PCD_MASK 0x0c /* card detect */ -#define HD64465_PCCISR_PBVD_MASK 0x03 /* battery voltage */ -#define HD64465_PCCISR_PBVD_BATGOOD 0x03 /* battery good */ -#define HD64465_PCCISR_PBVD_BATWARN 0x01 /* battery low warning */ -#define HD64465_PCCISR_PBVD_BATDEAD1 0x02 /* battery dead */ -#define HD64465_PCCISR_PBVD_BATDEAD2 0x00 /* battery dead */ -#define HD64465_REG_PCC0GCR 0x12002 /* socket 0 general control */ -#define HD64465_PCCGCR_PDRV 0x80 /* output drive */ -#define HD64465_PCCGCR_PCCR 0x40 /* PC card reset */ -#define HD64465_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */ -#define HD64465_PCCGCR_PVCC0 0x10 /* voltage control pin VCC0SEL0 */ -#define HD64465_PCCGCR_PMMOD 0x08 /* memory mode */ -#define HD64465_PCCGCR_PPA25 0x04 /* pin A25 */ -#define HD64465_PCCGCR_PPA24 0x02 /* pin A24 */ -#define HD64465_PCCGCR_PREG 0x01 /* ping PCC0REG# */ -#define HD64465_REG_PCC0CSCR 0x12004 /* socket 0 card status change */ -#define HD64465_PCCCSCR_PSCDI 0x80 /* sw card detect intr */ -#define HD64465_PCCCSCR_PSWSEL 0x40 /* power select */ -#define HD64465_PCCCSCR_PIREQ 0x20 /* IREQ intr req */ -#define HD64465_PCCCSCR_PSC 0x10 /* STSCHG (status change) pin */ -#define HD64465_PCCCSCR_PCDC 0x08 /* CD (card detect) change */ -#define HD64465_PCCCSCR_PRC 0x04 /* ready change */ -#define HD64465_PCCCSCR_PBW 0x02 /* battery warning change */ -#define HD64465_PCCCSCR_PBD 0x01 /* battery dead change */ -#define HD64465_REG_PCC0CSCIER 0x12006 /* socket 0 card status change interrupt enable */ -#define HD64465_PCCCSCIER_PCRE 0x80 /* change reset enable */ -#define HD64465_PCCCSCIER_PIREQE_MASK 0x60 /* IREQ enable */ -#define HD64465_PCCCSCIER_PIREQE_DISABLED 0x00 /* IREQ disabled */ -#define HD64465_PCCCSCIER_PIREQE_LEVEL 0x20 /* IREQ level-triggered */ -#define HD64465_PCCCSCIER_PIREQE_FALLING 0x40 /* IREQ falling-edge-trig */ -#define HD64465_PCCCSCIER_PIREQE_RISING 0x60 /* IREQ rising-edge-trig */ -#define HD64465_PCCCSCIER_PSCE 0x10 /* status change enable */ -#define HD64465_PCCCSCIER_PCDE 0x08 /* card detect change enable */ -#define HD64465_PCCCSCIER_PRE 0x04 /* ready change enable */ -#define HD64465_PCCCSCIER_PBWE 0x02 /* battery warn change enable */ -#define HD64465_PCCCSCIER_PBDE 0x01 /* battery dead change enable*/ -#define HD64465_REG_PCC0SCR 0x12008 /* socket 0 software control */ -#define HD64465_PCCSCR_SHDN 0x10 /* TPS2206 SHutDowN pin */ -#define HD64465_PCCSCR_SWP 0x01 /* write protect */ -#define HD64465_REG_PCCPSR 0x1200A /* serial power switch control */ -#define HD64465_REG_PCC1ISR 0x12010 /* socket 1 interface status */ -#define HD64465_REG_PCC1GCR 0x12012 /* socket 1 general control */ -#define HD64465_REG_PCC1CSCR 0x12014 /* socket 1 card status change */ -#define HD64465_REG_PCC1CSCIER 0x12016 /* socket 1 card status change interrupt enable */ -#define HD64465_REG_PCC1SCR 0x12018 /* socket 1 software control */ - - -/* PS/2 Keyboard and mouse controller -- *not* register compatible */ -#define HD64465_REG_KBCSR 0x1dc00 /* Keyboard Control/Status reg */ -#define HD64465_KBCSR_KBCIE 0x8000 /* KBCK Input Enable */ -#define HD64465_KBCSR_KBCOE 0x4000 /* KBCK Output Enable */ -#define HD64465_KBCSR_KBDOE 0x2000 /* KB DATA Output Enable */ -#define HD64465_KBCSR_KBCD 0x1000 /* KBCK Driven */ -#define HD64465_KBCSR_KBDD 0x0800 /* KB DATA Driven */ -#define HD64465_KBCSR_KBCS 0x0400 /* KBCK pin Status */ -#define HD64465_KBCSR_KBDS 0x0200 /* KB DATA pin Status */ -#define HD64465_KBCSR_KBDP 0x0100 /* KB DATA Parity bit */ -#define HD64465_KBCSR_KBD_MASK 0x00ff /* KD DATA shift reg */ -#define HD64465_REG_KBISR 0x1dc04 /* Keyboard Interrupt Status reg */ -#define HD64465_KBISR_KBRDF 0x0001 /* KB Received Data Full */ -#define HD64465_REG_MSCSR 0x1dc10 /* Mouse Control/Status reg */ -#define HD64465_REG_MSISR 0x1dc14 /* Mouse Interrupt Status reg */ - - -/* - * Logical address at which the HD64465 is mapped. Note that this - * should always be in the P2 segment (uncached and untranslated). - */ -#ifndef CONFIG_HD64465_IOBASE -#define CONFIG_HD64465_IOBASE 0xb0000000 -#endif -/* - * The HD64465 multiplexes all its modules' interrupts onto - * this single interrupt. - */ -#ifndef CONFIG_HD64465_IRQ -#define CONFIG_HD64465_IRQ 5 -#endif - - -#define _HD64465_IO_MASK 0xf8000000 -#define is_hd64465_addr(addr) \ - ((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK)) - -/* - * A range of 16 virtual interrupts generated by - * demuxing the HD64465 muxed interrupt. - */ -#define HD64465_IRQ_BASE OFFCHIP_IRQ_BASE -#define HD64465_IRQ_NUM 16 -#define HD64465_IRQ_ADC (HD64465_IRQ_BASE+0) -#define HD64465_IRQ_USB (HD64465_IRQ_BASE+1) -#define HD64465_IRQ_SCDI (HD64465_IRQ_BASE+2) -#define HD64465_IRQ_PARALLEL (HD64465_IRQ_BASE+3) -/* bit 4 is reserved */ -#define HD64465_IRQ_UART (HD64465_IRQ_BASE+5) -#define HD64465_IRQ_IRDA (HD64465_IRQ_BASE+6) -#define HD64465_IRQ_PS2MOUSE (HD64465_IRQ_BASE+7) -#define HD64465_IRQ_KBC (HD64465_IRQ_BASE+8) -#define HD64465_IRQ_TIMER1 (HD64465_IRQ_BASE+9) -#define HD64465_IRQ_TIMER0 (HD64465_IRQ_BASE+10) -#define HD64465_IRQ_GPIO (HD64465_IRQ_BASE+11) -#define HD64465_IRQ_AFE (HD64465_IRQ_BASE+12) -#define HD64465_IRQ_PCMCIA1 (HD64465_IRQ_BASE+13) -#define HD64465_IRQ_PCMCIA0 (HD64465_IRQ_BASE+14) -#define HD64465_IRQ_PS2KBD (HD64465_IRQ_BASE+15) - -/* Constants for PCMCIA mappings */ -#define HD64465_PCC_WINDOW 0x01000000 - -#define HD64465_PCC0_BASE 0xb8000000 /* area 6 */ -#define HD64465_PCC0_ATTR (HD64465_PCC0_BASE) -#define HD64465_PCC0_COMM (HD64465_PCC0_BASE+HD64465_PCC_WINDOW) -#define HD64465_PCC0_IO (HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW) - -#define HD64465_PCC1_BASE 0xb4000000 /* area 5 */ -#define HD64465_PCC1_ATTR (HD64465_PCC1_BASE) -#define HD64465_PCC1_COMM (HD64465_PCC1_BASE+HD64465_PCC_WINDOW) -#define HD64465_PCC1_IO (HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW) - -/* - * Base of USB controller interface (as memory) - */ -#define HD64465_USB_BASE (CONFIG_HD64465_IOBASE+0xb000) -#define HD64465_USB_LEN 0x1000 -/* - * Base of embedded SRAM, used for USB controller. - */ -#define HD64465_SRAM_BASE (CONFIG_HD64465_IOBASE+0x9000) -#define HD64465_SRAM_LEN 0x1000 - - - -#endif /* _ASM_SH_HD64465_ */ diff --git a/include/asm-sh/hd64465/io.h b/include/asm-sh/hd64465/io.h deleted file mode 100644 index 139f1472e5bb..000000000000 --- a/include/asm-sh/hd64465/io.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-sh/hd64465/io.h - * - * By Greg Banks - * (c) 2000 PocketPenguins Inc. - * - * Derived from io_hd64461.h, which bore the message: - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for an HD64465 "Windows CE Intelligent Peripheral Controller". - */ - -#ifndef _ASM_SH_IO_HD64465_H -#define _ASM_SH_IO_HD64465_H - -extern unsigned char hd64465_inb(unsigned long port); -extern unsigned short hd64465_inw(unsigned long port); -extern unsigned int hd64465_inl(unsigned long port); - -extern void hd64465_outb(unsigned char value, unsigned long port); -extern void hd64465_outw(unsigned short value, unsigned long port); -extern void hd64465_outl(unsigned int value, unsigned long port); - -extern unsigned char hd64465_inb_p(unsigned long port); -extern void hd64465_outb_p(unsigned char value, unsigned long port); - -extern unsigned long hd64465_isa_port2addr(unsigned long offset); -extern int hd64465_irq_demux(int irq); -/* Provision for generic secondary demux step -- used by PCMCIA code */ -extern void hd64465_register_irq_demux(int irq, - int (*demux)(int irq, void *dev), void *dev); -extern void hd64465_unregister_irq_demux(int irq); -/* Set this variable to 1 to see port traffic */ -extern int hd64465_io_debug; -/* Map a range of ports to a range of kernel virtual memory. - */ -extern void hd64465_port_map(unsigned short baseport, unsigned int nports, - unsigned long addr, unsigned char shift); -extern void hd64465_port_unmap(unsigned short baseport, unsigned int nports); - -#endif /* _ASM_SH_IO_HD64465_H */ diff --git a/include/asm-sh/heartbeat.h b/include/asm-sh/heartbeat.h deleted file mode 100644 index 724a43ed245e..000000000000 --- a/include/asm-sh/heartbeat.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_SH_HEARTBEAT_H -#define __ASM_SH_HEARTBEAT_H - -#include - -#define HEARTBEAT_INVERTED (1 << 0) - -struct heartbeat_data { - void __iomem *base; - unsigned char *bit_pos; - unsigned int nr_bits; - struct timer_list timer; - unsigned int regsize; - unsigned long flags; -}; - -#endif /* __ASM_SH_HEARTBEAT_H */ diff --git a/include/asm-sh/hp6xx.h b/include/asm-sh/hp6xx.h deleted file mode 100644 index 0d4165a32dcd..000000000000 --- a/include/asm-sh/hp6xx.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef __ASM_SH_HP6XX_H -#define __ASM_SH_HP6XX_H - -/* - * Copyright (C) 2003, 2004, 2005 Andriy Skulysh - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#define HP680_BTN_IRQ 32 /* IRQ0_IRQ */ -#define HP680_TS_IRQ 35 /* IRQ3_IRQ */ -#define HP680_HD64461_IRQ 36 /* IRQ4_IRQ */ - -#define DAC_LCD_BRIGHTNESS 0 -#define DAC_SPEAKER_VOLUME 1 - -#define PGDR_OPENED 0x01 -#define PGDR_MAIN_BATTERY_OUT 0x04 -#define PGDR_PLAY_BUTTON 0x08 -#define PGDR_REWIND_BUTTON 0x10 -#define PGDR_RECORD_BUTTON 0x20 - -#define PHDR_TS_PEN_DOWN 0x08 - -#define PJDR_LED_BLINK 0x02 - -#define PKDR_LED_GREEN 0x10 - -#define SCPDR_TS_SCAN_ENABLE 0x20 -#define SCPDR_TS_SCAN_Y 0x02 -#define SCPDR_TS_SCAN_X 0x01 - -#define SCPCR_TS_ENABLE 0x405 -#define SCPCR_TS_MASK 0xc0f - -#define ADC_CHANNEL_TS_Y 1 -#define ADC_CHANNEL_TS_X 2 -#define ADC_CHANNEL_BATTERY 3 -#define ADC_CHANNEL_BACKUP 4 -#define ADC_CHANNEL_CHARGE 5 - -#define HD64461_GPADR_SPEAKER 0x01 -#define HD64461_GPADR_PCMCIA0 (0x02|0x08) - -#define HD64461_GPBDR_LCDOFF 0x01 -#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78 -#define HD64461_GPBDR_LED_RED 0x80 - -#include -#include - -#define PJDR 0xa4000130 -#define PKDR 0xa4000132 - -#endif /* __ASM_SH_HP6XX_H */ diff --git a/include/asm-sh/hugetlb.h b/include/asm-sh/hugetlb.h deleted file mode 100644 index 967068fb79ac..000000000000 --- a/include/asm-sh/hugetlb.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef _ASM_SH_HUGETLB_H -#define _ASM_SH_HUGETLB_H - -#include - - -static inline int is_hugepage_only_range(struct mm_struct *mm, - unsigned long addr, - unsigned long len) { - return 0; -} - -/* - * If the arch doesn't supply something else, assume that hugepage - * size aligned regions are ok without further preparation. - */ -static inline int prepare_hugepage_range(struct file *file, - unsigned long addr, unsigned long len) -{ - if (len & ~HPAGE_MASK) - return -EINVAL; - if (addr & ~HPAGE_MASK) - return -EINVAL; - return 0; -} - -static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) { -} - -static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb, - unsigned long addr, unsigned long end, - unsigned long floor, - unsigned long ceiling) -{ - free_pgd_range(tlb, addr, end, floor, ceiling); -} - -static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) -{ - set_pte_at(mm, addr, ptep, pte); -} - -static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - return ptep_get_and_clear(mm, addr, ptep); -} - -static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep) -{ -} - -static inline int huge_pte_none(pte_t pte) -{ - return pte_none(pte); -} - -static inline pte_t huge_pte_wrprotect(pte_t pte) -{ - return pte_wrprotect(pte); -} - -static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - ptep_set_wrprotect(mm, addr, ptep); -} - -static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep, - pte_t pte, int dirty) -{ - return ptep_set_access_flags(vma, addr, ptep, pte, dirty); -} - -static inline pte_t huge_ptep_get(pte_t *ptep) -{ - return *ptep; -} - -static inline int arch_prepare_hugepage(struct page *page) -{ - return 0; -} - -static inline void arch_release_hugepage(struct page *page) -{ -} - -#endif /* _ASM_SH_HUGETLB_H */ diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h deleted file mode 100644 index d557b00111bf..000000000000 --- a/include/asm-sh/hw_irq.h +++ /dev/null @@ -1,123 +0,0 @@ -#ifndef __ASM_SH_HW_IRQ_H -#define __ASM_SH_HW_IRQ_H - -#include -#include - -extern atomic_t irq_err_count; - -struct ipr_data { - unsigned char irq; - unsigned char ipr_idx; /* Index for the IPR registered */ - unsigned char shift; /* Number of bits to shift the data */ - unsigned char priority; /* The priority */ -}; - -struct ipr_desc { - unsigned long *ipr_offsets; - unsigned int nr_offsets; - struct ipr_data *ipr_data; - unsigned int nr_irqs; - struct irq_chip chip; -}; - -void register_ipr_controller(struct ipr_desc *); - -typedef unsigned char intc_enum; - -struct intc_vect { - intc_enum enum_id; - unsigned short vect; -}; - -#define INTC_VECT(enum_id, vect) { enum_id, vect } -#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq)) - -struct intc_group { - intc_enum enum_id; - intc_enum enum_ids[32]; -}; - -#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } } - -struct intc_mask_reg { - unsigned long set_reg, clr_reg, reg_width; - intc_enum enum_ids[32]; -#ifdef CONFIG_SMP - unsigned long smp; -#endif -}; - -struct intc_prio_reg { - unsigned long set_reg, clr_reg, reg_width, field_width; - intc_enum enum_ids[16]; -#ifdef CONFIG_SMP - unsigned long smp; -#endif -}; - -struct intc_sense_reg { - unsigned long reg, reg_width, field_width; - intc_enum enum_ids[16]; -}; - -#ifdef CONFIG_SMP -#define INTC_SMP(stride, nr) .smp = (stride) | ((nr) << 8) -#else -#define INTC_SMP(stride, nr) -#endif - -struct intc_desc { - struct intc_vect *vectors; - unsigned int nr_vectors; - struct intc_group *groups; - unsigned int nr_groups; - struct intc_mask_reg *mask_regs; - unsigned int nr_mask_regs; - struct intc_prio_reg *prio_regs; - unsigned int nr_prio_regs; - struct intc_sense_reg *sense_regs; - unsigned int nr_sense_regs; - char *name; -#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) - struct intc_mask_reg *ack_regs; - unsigned int nr_ack_regs; -#endif -}; - -#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a) -#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups, \ - mask_regs, prio_regs, sense_regs) \ -struct intc_desc symbol __initdata = { \ - _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \ - _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \ - _INTC_ARRAY(sense_regs), \ - chipname, \ -} - -#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) -#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \ - mask_regs, prio_regs, sense_regs, ack_regs) \ -struct intc_desc symbol __initdata = { \ - _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \ - _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \ - _INTC_ARRAY(sense_regs), \ - chipname, \ - _INTC_ARRAY(ack_regs), \ -} -#endif - -void __init register_intc_controller(struct intc_desc *desc); -int intc_set_priority(unsigned int irq, unsigned int prio); - -void __init plat_irq_setup(void); -#ifdef CONFIG_CPU_SH3 -void __init plat_irq_setup_sh3(void); -#endif - -enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210, - IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK, - IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 }; -void __init plat_irq_setup_pins(int mode); - -#endif /* __ASM_SH_HW_IRQ_H */ diff --git a/include/asm-sh/i2c-sh7760.h b/include/asm-sh/i2c-sh7760.h deleted file mode 100644 index 24182116711f..000000000000 --- a/include/asm-sh/i2c-sh7760.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * MMIO/IRQ and platform data for SH7760 I2C channels - */ - -#ifndef _I2C_SH7760_H_ -#define _I2C_SH7760_H_ - -#define SH7760_I2C_DEVNAME "sh7760-i2c" - -#define SH7760_I2C0_MMIO 0xFE140000 -#define SH7760_I2C0_MMIOEND 0xFE14003B -#define SH7760_I2C0_IRQ 62 - -#define SH7760_I2C1_MMIO 0xFE150000 -#define SH7760_I2C1_MMIOEND 0xFE15003B -#define SH7760_I2C1_IRQ 63 - -struct sh7760_i2c_platdata { - unsigned int speed_khz; -}; - -#endif diff --git a/include/asm-sh/ilsel.h b/include/asm-sh/ilsel.h deleted file mode 100644 index e3d304b280f6..000000000000 --- a/include/asm-sh/ilsel.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifndef __ASM_SH_ILSEL_H -#define __ASM_SH_ILSEL_H - -typedef enum { - ILSEL_NONE, - ILSEL_LAN, - ILSEL_USBH_I, - ILSEL_USBH_S, - ILSEL_USBH_V, - ILSEL_RTC, - ILSEL_USBP_I, - ILSEL_USBP_S, - ILSEL_USBP_V, - ILSEL_KEY, - - /* - * ILSEL Aliases - corner cases for interleaved level tables. - * - * Someone thought this was a good idea and less hassle than - * demuxing a shared vector, really. - */ - - /* ILSEL0 and 2 */ - ILSEL_FPGA0, - ILSEL_FPGA1, - ILSEL_EX1, - ILSEL_EX2, - ILSEL_EX3, - ILSEL_EX4, - - /* ILSEL1 and 3 */ - ILSEL_FPGA2 = ILSEL_FPGA0, - ILSEL_FPGA3 = ILSEL_FPGA1, - ILSEL_EX5 = ILSEL_EX1, - ILSEL_EX6 = ILSEL_EX2, - ILSEL_EX7 = ILSEL_EX3, - ILSEL_EX8 = ILSEL_EX4, -} ilsel_source_t; - -/* arch/sh/boards/renesas/x3proto/ilsel.c */ -int ilsel_enable(ilsel_source_t set); -int ilsel_enable_fixed(ilsel_source_t set, unsigned int level); -void ilsel_disable(unsigned int irq); - -#endif /* __ASM_SH_ILSEL_H */ diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h deleted file mode 100644 index a4fbf0c84fb1..000000000000 --- a/include/asm-sh/io.h +++ /dev/null @@ -1,366 +0,0 @@ -#ifndef __ASM_SH_IO_H -#define __ASM_SH_IO_H - -/* - * Convention: - * read{b,w,l}/write{b,w,l} are for PCI, - * while in{b,w,l}/out{b,w,l} are for ISA - * These may (will) be platform specific function. - * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p - * and 'string' versions: ins{b,w,l}/outs{b,w,l} - * For read{b,w,l} and write{b,w,l} there are also __raw versions, which - * do not have a memory barrier after them. - * - * In addition, we have - * ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O. - * which are processor specific. - */ - -/* - * We follow the Alpha convention here: - * __inb expands to an inline function call (which calls via the mv) - * _inb is a real function call (note ___raw fns are _ version of __raw) - * inb by default expands to _inb, but the machine specific code may - * define it to __inb if it chooses. - */ -#include -#include -#include -#include -#include -#include - -#ifdef __KERNEL__ - -/* - * Depending on which platform we are running on, we need different - * I/O functions. - */ -#define __IO_PREFIX generic -#include -#include - -#define maybebadio(port) \ - printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \ - __FUNCTION__, __LINE__, (port), (u32)__builtin_return_address(0)) - -/* - * Since boards are able to define their own set of I/O routines through - * their respective machine vector, we always wrap through the mv. - * - * Also, in the event that a board hasn't provided its own definition for - * a given routine, it will be wrapped to generic code at run-time. - */ - -#define __inb(p) sh_mv.mv_inb((p)) -#define __inw(p) sh_mv.mv_inw((p)) -#define __inl(p) sh_mv.mv_inl((p)) -#define __outb(x,p) sh_mv.mv_outb((x),(p)) -#define __outw(x,p) sh_mv.mv_outw((x),(p)) -#define __outl(x,p) sh_mv.mv_outl((x),(p)) - -#define __inb_p(p) sh_mv.mv_inb_p((p)) -#define __inw_p(p) sh_mv.mv_inw_p((p)) -#define __inl_p(p) sh_mv.mv_inl_p((p)) -#define __outb_p(x,p) sh_mv.mv_outb_p((x),(p)) -#define __outw_p(x,p) sh_mv.mv_outw_p((x),(p)) -#define __outl_p(x,p) sh_mv.mv_outl_p((x),(p)) - -#define __insb(p,b,c) sh_mv.mv_insb((p), (b), (c)) -#define __insw(p,b,c) sh_mv.mv_insw((p), (b), (c)) -#define __insl(p,b,c) sh_mv.mv_insl((p), (b), (c)) -#define __outsb(p,b,c) sh_mv.mv_outsb((p), (b), (c)) -#define __outsw(p,b,c) sh_mv.mv_outsw((p), (b), (c)) -#define __outsl(p,b,c) sh_mv.mv_outsl((p), (b), (c)) - -#define __readb(a) sh_mv.mv_readb((a)) -#define __readw(a) sh_mv.mv_readw((a)) -#define __readl(a) sh_mv.mv_readl((a)) -#define __writeb(v,a) sh_mv.mv_writeb((v),(a)) -#define __writew(v,a) sh_mv.mv_writew((v),(a)) -#define __writel(v,a) sh_mv.mv_writel((v),(a)) - -#define inb __inb -#define inw __inw -#define inl __inl -#define outb __outb -#define outw __outw -#define outl __outl - -#define inb_p __inb_p -#define inw_p __inw_p -#define inl_p __inl_p -#define outb_p __outb_p -#define outw_p __outw_p -#define outl_p __outl_p - -#define insb __insb -#define insw __insw -#define insl __insl -#define outsb __outsb -#define outsw __outsw -#define outsl __outsl - -#define __raw_readb(a) __readb((void __iomem *)(a)) -#define __raw_readw(a) __readw((void __iomem *)(a)) -#define __raw_readl(a) __readl((void __iomem *)(a)) -#define __raw_writeb(v, a) __writeb(v, (void __iomem *)(a)) -#define __raw_writew(v, a) __writew(v, (void __iomem *)(a)) -#define __raw_writel(v, a) __writel(v, (void __iomem *)(a)) - -void __raw_writesl(unsigned long addr, const void *data, int longlen); -void __raw_readsl(unsigned long addr, void *data, int longlen); - -/* - * The platform header files may define some of these macros to use - * the inlined versions where appropriate. These macros may also be - * redefined by userlevel programs. - */ -#ifdef __readb -# define readb(a) ({ unsigned int r_ = __raw_readb(a); mb(); r_; }) -#endif -#ifdef __raw_readw -# define readw(a) ({ unsigned int r_ = __raw_readw(a); mb(); r_; }) -#endif -#ifdef __raw_readl -# define readl(a) ({ unsigned int r_ = __raw_readl(a); mb(); r_; }) -#endif - -#ifdef __raw_writeb -# define writeb(v,a) ({ __raw_writeb((v),(a)); mb(); }) -#endif -#ifdef __raw_writew -# define writew(v,a) ({ __raw_writew((v),(a)); mb(); }) -#endif -#ifdef __raw_writel -# define writel(v,a) ({ __raw_writel((v),(a)); mb(); }) -#endif - -#define __BUILD_MEMORY_STRING(bwlq, type) \ - \ -static inline void writes##bwlq(volatile void __iomem *mem, \ - const void *addr, unsigned int count) \ -{ \ - const volatile type *__addr = addr; \ - \ - while (count--) { \ - __raw_write##bwlq(*__addr, mem); \ - __addr++; \ - } \ -} \ - \ -static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \ - unsigned int count) \ -{ \ - volatile type *__addr = addr; \ - \ - while (count--) { \ - *__addr = __raw_read##bwlq(mem); \ - __addr++; \ - } \ -} - -__BUILD_MEMORY_STRING(b, u8) -__BUILD_MEMORY_STRING(w, u16) -#define writesl __raw_writesl -#define readsl __raw_readsl - -#define readb_relaxed(a) readb(a) -#define readw_relaxed(a) readw(a) -#define readl_relaxed(a) readl(a) - -/* Simple MMIO */ -#define ioread8(a) readb(a) -#define ioread16(a) readw(a) -#define ioread16be(a) be16_to_cpu(__raw_readw((a))) -#define ioread32(a) readl(a) -#define ioread32be(a) be32_to_cpu(__raw_readl((a))) - -#define iowrite8(v,a) writeb((v),(a)) -#define iowrite16(v,a) writew((v),(a)) -#define iowrite16be(v,a) __raw_writew(cpu_to_be16((v)),(a)) -#define iowrite32(v,a) writel((v),(a)) -#define iowrite32be(v,a) __raw_writel(cpu_to_be32((v)),(a)) - -#define ioread8_rep(a, d, c) readsb((a), (d), (c)) -#define ioread16_rep(a, d, c) readsw((a), (d), (c)) -#define ioread32_rep(a, d, c) readsl((a), (d), (c)) - -#define iowrite8_rep(a, s, c) writesb((a), (s), (c)) -#define iowrite16_rep(a, s, c) writesw((a), (s), (c)) -#define iowrite32_rep(a, s, c) writesl((a), (s), (c)) - -#define mmiowb() wmb() /* synco on SH-4A, otherwise a nop */ - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * This function provides a method for the generic case where a board-specific - * ioport_map simply needs to return the port + some arbitrary port base. - * - * We use this at board setup time to implicitly set the port base, and - * as a result, we can use the generic ioport_map. - */ -static inline void __set_io_port_base(unsigned long pbase) -{ - extern unsigned long generic_io_base; - - generic_io_base = pbase; -} - -#define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n)) - -/* We really want to try and get these to memcpy etc */ -extern void memcpy_fromio(void *, volatile void __iomem *, unsigned long); -extern void memcpy_toio(volatile void __iomem *, const void *, unsigned long); -extern void memset_io(volatile void __iomem *, int, unsigned long); - -/* SuperH on-chip I/O functions */ -static inline unsigned char ctrl_inb(unsigned long addr) -{ - return *(volatile unsigned char*)addr; -} - -static inline unsigned short ctrl_inw(unsigned long addr) -{ - return *(volatile unsigned short*)addr; -} - -static inline unsigned int ctrl_inl(unsigned long addr) -{ - return *(volatile unsigned long*)addr; -} - -static inline unsigned long long ctrl_inq(unsigned long addr) -{ - return *(volatile unsigned long long*)addr; -} - -static inline void ctrl_outb(unsigned char b, unsigned long addr) -{ - *(volatile unsigned char*)addr = b; -} - -static inline void ctrl_outw(unsigned short b, unsigned long addr) -{ - *(volatile unsigned short*)addr = b; -} - -static inline void ctrl_outl(unsigned int b, unsigned long addr) -{ - *(volatile unsigned long*)addr = b; -} - -static inline void ctrl_outq(unsigned long long b, unsigned long addr) -{ - *(volatile unsigned long long*)addr = b; -} - -static inline void ctrl_delay(void) -{ -#ifdef P2SEG - ctrl_inw(P2SEG); -#endif -} - -/* Quad-word real-mode I/O, don't ask.. */ -unsigned long long peek_real_address_q(unsigned long long addr); -unsigned long long poke_real_address_q(unsigned long long addr, - unsigned long long val); - -#if !defined(CONFIG_MMU) -#define virt_to_phys(address) ((unsigned long)(address)) -#define phys_to_virt(address) ((void *)(address)) -#else -#define virt_to_phys(address) (__pa(address)) -#define phys_to_virt(address) (__va(address)) -#endif - -/* - * On 32-bit SH, we traditionally have the whole physical address space - * mapped at all times (as MIPS does), so "ioremap()" and "iounmap()" do - * not need to do anything but place the address in the proper segment. - * This is true for P1 and P2 addresses, as well as some P3 ones. - * However, most of the P3 addresses and newer cores using extended - * addressing need to map through page tables, so the ioremap() - * implementation becomes a bit more complicated. - * - * See arch/sh/mm/ioremap.c for additional notes on this. - * - * We cheat a bit and always return uncachable areas until we've fixed - * the drivers to handle caching properly. - * - * On the SH-5 the concept of segmentation in the 1:1 PXSEG sense simply - * doesn't exist, so everything must go through page tables. - */ -#ifdef CONFIG_MMU -void __iomem *__ioremap(unsigned long offset, unsigned long size, - unsigned long flags); -void __iounmap(void __iomem *addr); - -/* arch/sh/mm/ioremap_64.c */ -unsigned long onchip_remap(unsigned long addr, unsigned long size, - const char *name); -extern void onchip_unmap(unsigned long vaddr); -#else -#define __ioremap(offset, size, flags) ((void __iomem *)(offset)) -#define __iounmap(addr) do { } while (0) -#define onchip_remap(addr, size, name) (addr) -#define onchip_unmap(addr) do { } while (0) -#endif /* CONFIG_MMU */ - -static inline void __iomem * -__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) -{ -#ifdef CONFIG_SUPERH32 - unsigned long last_addr = offset + size - 1; -#endif - void __iomem *ret; - - ret = __ioremap_trapped(offset, size); - if (ret) - return ret; - -#ifdef CONFIG_SUPERH32 - /* - * For P1 and P2 space this is trivial, as everything is already - * mapped. Uncached access for P1 addresses are done through P2. - * In the P3 case or for addresses outside of the 29-bit space, - * mapping must be done by the PMB or by using page tables. - */ - if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) { - if (unlikely(flags & _PAGE_CACHABLE)) - return (void __iomem *)P1SEGADDR(offset); - - return (void __iomem *)P2SEGADDR(offset); - } -#endif - - return __ioremap(offset, size, flags); -} - -#define ioremap(offset, size) \ - __ioremap_mode((offset), (size), 0) -#define ioremap_nocache(offset, size) \ - __ioremap_mode((offset), (size), 0) -#define ioremap_cache(offset, size) \ - __ioremap_mode((offset), (size), _PAGE_CACHABLE) -#define p3_ioremap(offset, size, flags) \ - __ioremap((offset), (size), (flags)) -#define iounmap(addr) \ - __iounmap((addr)) - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_IO_H */ diff --git a/include/asm-sh/io_generic.h b/include/asm-sh/io_generic.h deleted file mode 100644 index 92fc6070d7b3..000000000000 --- a/include/asm-sh/io_generic.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Trivial I/O routine definitions, intentionally meant to be included - * multiple times. Ugly I/O routine concatenation helpers taken from - * alpha. Must be included _before_ io.h to avoid preprocessor-induced - * routine mismatch. - */ -#define IO_CONCAT(a,b) _IO_CONCAT(a,b) -#define _IO_CONCAT(a,b) a ## _ ## b - -#ifndef __IO_PREFIX -#error "Don't include this header without a valid system prefix" -#endif - -u8 IO_CONCAT(__IO_PREFIX,inb)(unsigned long); -u16 IO_CONCAT(__IO_PREFIX,inw)(unsigned long); -u32 IO_CONCAT(__IO_PREFIX,inl)(unsigned long); - -void IO_CONCAT(__IO_PREFIX,outb)(u8, unsigned long); -void IO_CONCAT(__IO_PREFIX,outw)(u16, unsigned long); -void IO_CONCAT(__IO_PREFIX,outl)(u32, unsigned long); - -u8 IO_CONCAT(__IO_PREFIX,inb_p)(unsigned long); -u16 IO_CONCAT(__IO_PREFIX,inw_p)(unsigned long); -u32 IO_CONCAT(__IO_PREFIX,inl_p)(unsigned long); -void IO_CONCAT(__IO_PREFIX,outb_p)(u8, unsigned long); -void IO_CONCAT(__IO_PREFIX,outw_p)(u16, unsigned long); -void IO_CONCAT(__IO_PREFIX,outl_p)(u32, unsigned long); - -void IO_CONCAT(__IO_PREFIX,insb)(unsigned long, void *dst, unsigned long count); -void IO_CONCAT(__IO_PREFIX,insw)(unsigned long, void *dst, unsigned long count); -void IO_CONCAT(__IO_PREFIX,insl)(unsigned long, void *dst, unsigned long count); -void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long count); -void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count); -void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count); - -u8 IO_CONCAT(__IO_PREFIX,readb)(void __iomem *); -u16 IO_CONCAT(__IO_PREFIX,readw)(void __iomem *); -u32 IO_CONCAT(__IO_PREFIX,readl)(void __iomem *); -void IO_CONCAT(__IO_PREFIX,writeb)(u8, void __iomem *); -void IO_CONCAT(__IO_PREFIX,writew)(u16, void __iomem *); -void IO_CONCAT(__IO_PREFIX,writel)(u32, void __iomem *); - -void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size); -void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr); - -void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size); -void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr); - -#undef __IO_PREFIX diff --git a/include/asm-sh/io_trapped.h b/include/asm-sh/io_trapped.h deleted file mode 100644 index f1251d4f0ba9..000000000000 --- a/include/asm-sh/io_trapped.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef __ASM_SH_IO_TRAPPED_H -#define __ASM_SH_IO_TRAPPED_H - -#include -#include -#include - -#define IO_TRAPPED_MAGIC 0xfeedbeef - -struct trapped_io { - unsigned int magic; - struct resource *resource; - unsigned int num_resources; - unsigned int minimum_bus_width; - struct list_head list; - void __iomem *virt_base; -} __aligned(PAGE_SIZE); - -#ifdef CONFIG_IO_TRAPPED -int register_trapped_io(struct trapped_io *tiop); -int handle_trapped_io(struct pt_regs *regs, unsigned long address); - -void __iomem *match_trapped_io_handler(struct list_head *list, - unsigned long offset, - unsigned long size); - -#ifdef CONFIG_HAS_IOMEM -extern struct list_head trapped_mem; - -static inline void __iomem * -__ioremap_trapped(unsigned long offset, unsigned long size) -{ - return match_trapped_io_handler(&trapped_mem, offset, size); -} -#else -#define __ioremap_trapped(offset, size) NULL -#endif - -#ifdef CONFIG_HAS_IOPORT -extern struct list_head trapped_io; - -static inline void __iomem * -__ioport_map_trapped(unsigned long offset, unsigned long size) -{ - return match_trapped_io_handler(&trapped_io, offset, size); -} -#else -#define __ioport_map_trapped(offset, size) NULL -#endif - -#else -#define register_trapped_io(tiop) (-1) -#define handle_trapped_io(tiop, address) 0 -#define __ioremap_trapped(offset, size) NULL -#define __ioport_map_trapped(offset, size) NULL -#endif - -#endif /* __ASM_SH_IO_TRAPPED_H */ diff --git a/include/asm-sh/ioctl.h b/include/asm-sh/ioctl.h deleted file mode 100644 index b279fe06dfe5..000000000000 --- a/include/asm-sh/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/ioctls.h b/include/asm-sh/ioctls.h deleted file mode 100644 index c212c371a4a5..000000000000 --- a/include/asm-sh/ioctls.h +++ /dev/null @@ -1,103 +0,0 @@ -#ifndef __ASM_SH_IOCTLS_H -#define __ASM_SH_IOCTLS_H - -#include - -#define FIOCLEX _IO('f', 1) -#define FIONCLEX _IO('f', 2) -#define FIOASYNC _IOW('f', 125, int) -#define FIONBIO _IOW('f', 126, int) -#define FIONREAD _IOR('f', 127, int) -#define TIOCINQ FIONREAD -#define FIOQSIZE _IOR('f', 128, loff_t) - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 - -#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */ -#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */ -#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */ -#define TCSETAF 0x4012741C /* _IOW('t', 28, struct termio) */ - -#define TCSBRK _IO('t', 29) -#define TCXONC _IO('t', 30) -#define TCFLSH _IO('t', 31) - -#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */ -#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */ -#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ -#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ -#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ - -#define TIOCSPGRP _IOW('t', 118, int) -#define TIOCGPGRP _IOR('t', 119, int) - -#define TIOCEXCL _IO('T', 12) /* 0x540C */ -#define TIOCNXCL _IO('T', 13) /* 0x540D */ -#define TIOCSCTTY _IO('T', 14) /* 0x540E */ - -#define TIOCSTI _IOW('T', 18, char) /* 0x5412 */ -#define TIOCMGET _IOR('T', 21, unsigned int) /* 0x5415 */ -#define TIOCMBIS _IOW('T', 22, unsigned int) /* 0x5416 */ -#define TIOCMBIC _IOW('T', 23, unsigned int) /* 0x5417 */ -#define TIOCMSET _IOW('T', 24, unsigned int) /* 0x5418 */ -# define TIOCM_LE 0x001 -# define TIOCM_DTR 0x002 -# define TIOCM_RTS 0x004 -# define TIOCM_ST 0x008 -# define TIOCM_SR 0x010 -# define TIOCM_CTS 0x020 -# define TIOCM_CAR 0x040 -# define TIOCM_RNG 0x080 -# define TIOCM_DSR 0x100 -# define TIOCM_CD TIOCM_CAR -# define TIOCM_RI TIOCM_RNG - -#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) /* 0x5419 */ -#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) /* 0x541A */ -#define TIOCLINUX _IOW('T', 28, char) /* 0x541C */ -#define TIOCCONS _IO('T', 29) /* 0x541D */ -#define TIOCGSERIAL 0x803C541E /* _IOR('T', 30, struct serial_struct) 0x541E */ -#define TIOCSSERIAL 0x403C541F /* _IOW('T', 31, struct serial_struct) 0x541F */ -#define TIOCPKT _IOW('T', 32, int) /* 0x5420 */ -# define TIOCPKT_DATA 0 -# define TIOCPKT_FLUSHREAD 1 -# define TIOCPKT_FLUSHWRITE 2 -# define TIOCPKT_STOP 4 -# define TIOCPKT_START 8 -# define TIOCPKT_NOSTOP 16 -# define TIOCPKT_DOSTOP 32 - - -#define TIOCNOTTY _IO('T', 34) /* 0x5422 */ -#define TIOCSETD _IOW('T', 35, int) /* 0x5423 */ -#define TIOCGETD _IOR('T', 36, int) /* 0x5424 */ -#define TCSBRKP _IOW('T', 37, int) /* 0x5425 */ /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK _IO('T', 39) /* 0x5427 */ /* BSD compatibility */ -#define TIOCCBRK _IO('T', 40) /* 0x5428 */ /* BSD compatibility */ -#define TIOCGSID _IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */ -#define TCGETS2 _IOR('T', 42, struct termios2) -#define TCSETS2 _IOW('T', 43, struct termios2) -#define TCSETSW2 _IOW('T', 44, struct termios2) -#define TCSETSF2 _IOW('T', 45, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */ -#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */ -#define TIOCSERSWILD _IOW('T', 85, int) /* 0x5455 */ -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x80d85458 /* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */ -#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */ - /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ -# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ -#define TIOCSERGETMULTI 0x80A8545A /* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */ -#define TIOCSERSETMULTI 0x40A8545B /* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */ - -#define TIOCMIWAIT _IO('T', 92) /* 0x545C */ /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ - -#endif /* __ASM_SH_IOCTLS_H */ diff --git a/include/asm-sh/ipcbuf.h b/include/asm-sh/ipcbuf.h deleted file mode 100644 index 5ffc9972a7ea..000000000000 --- a/include/asm-sh/ipcbuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __ASM_SH_IPCBUF_H__ -#define __ASM_SH_IPCBUF_H__ - -/* - * The ipc64_perm structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __ASM_SH_IPCBUF_H__ */ diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h deleted file mode 100644 index ca66e5df69dc..000000000000 --- a/include/asm-sh/irq.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef __ASM_SH_IRQ_H -#define __ASM_SH_IRQ_H - -#include - -/* - * A sane default based on a reasonable vector table size, platforms are - * advised to cap this at the hard limit that they're interested in - * through the machvec. - */ -#define NR_IRQS 256 - -/* - * Convert back and forth between INTEVT and IRQ values. - */ -#ifdef CONFIG_CPU_HAS_INTEVT -#define evt2irq(evt) (((evt) >> 5) - 16) -#define irq2evt(irq) (((irq) + 16) << 5) -#else -#define evt2irq(evt) (evt) -#define irq2evt(irq) (irq) -#endif - -/* - * Simple Mask Register Support - */ -extern void make_maskreg_irq(unsigned int irq); -extern unsigned short *irq_mask_register; - -/* - * PINT IRQs - */ -void init_IRQ_pint(void); -void make_imask_irq(unsigned int irq); - -static inline int generic_irq_demux(int irq) -{ - return irq; -} - -#define irq_canonicalize(irq) (irq) -#define irq_demux(irq) sh_mv.mv_irq_demux(irq) - -#ifdef CONFIG_IRQSTACKS -extern void irq_ctx_init(int cpu); -extern void irq_ctx_exit(int cpu); -# define __ARCH_HAS_DO_SOFTIRQ -#else -# define irq_ctx_init(cpu) do { } while (0) -# define irq_ctx_exit(cpu) do { } while (0) -#endif - -#ifdef CONFIG_CPU_SH5 -#include -#endif - -#endif /* __ASM_SH_IRQ_H */ diff --git a/include/asm-sh/irq_regs.h b/include/asm-sh/irq_regs.h deleted file mode 100644 index 3dd9c0b70270..000000000000 --- a/include/asm-sh/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/irqflags.h b/include/asm-sh/irqflags.h deleted file mode 100644 index 46e71da5be6b..000000000000 --- a/include/asm-sh/irqflags.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef __ASM_SH_IRQFLAGS_H -#define __ASM_SH_IRQFLAGS_H - -#ifdef CONFIG_SUPERH32 -#include "irqflags_32.h" -#else -#include "irqflags_64.h" -#endif - -#define raw_local_save_flags(flags) \ - do { (flags) = __raw_local_save_flags(); } while (0) - -static inline int raw_irqs_disabled_flags(unsigned long flags) -{ - return (flags != 0); -} - -static inline int raw_irqs_disabled(void) -{ - unsigned long flags = __raw_local_save_flags(); - - return raw_irqs_disabled_flags(flags); -} - -#define raw_local_irq_save(flags) \ - do { (flags) = __raw_local_irq_save(); } while (0) - -static inline void raw_local_irq_restore(unsigned long flags) -{ - if ((flags & 0xf0) != 0xf0) - raw_local_irq_enable(); -} - -#endif /* __ASM_SH_IRQFLAGS_H */ diff --git a/include/asm-sh/irqflags_32.h b/include/asm-sh/irqflags_32.h deleted file mode 100644 index 60218f541340..000000000000 --- a/include/asm-sh/irqflags_32.h +++ /dev/null @@ -1,99 +0,0 @@ -#ifndef __ASM_SH_IRQFLAGS_32_H -#define __ASM_SH_IRQFLAGS_32_H - -static inline void raw_local_irq_enable(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "and %1, %0\n\t" -#ifdef CONFIG_CPU_HAS_SR_RB - "stc r6_bank, %1\n\t" - "or %1, %0\n\t" -#endif - "ldc %0, sr\n\t" - : "=&r" (__dummy0), "=r" (__dummy1) - : "1" (~0x000000f0) - : "memory" - ); -} - -static inline void raw_local_irq_disable(void) -{ - unsigned long flags; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "or #0xf0, %0\n\t" - "ldc %0, sr\n\t" - : "=&z" (flags) - : /* no inputs */ - : "memory" - ); -} - -static inline void set_bl_bit(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "or %2, %0\n\t" - "and %3, %0\n\t" - "ldc %0, sr\n\t" - : "=&r" (__dummy0), "=r" (__dummy1) - : "r" (0x10000000), "r" (0xffffff0f) - : "memory" - ); -} - -static inline void clear_bl_bit(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "and %2, %0\n\t" - "ldc %0, sr\n\t" - : "=&r" (__dummy0), "=r" (__dummy1) - : "1" (~0x10000000) - : "memory" - ); -} - -static inline unsigned long __raw_local_save_flags(void) -{ - unsigned long flags; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "and #0xf0, %0\n\t" - : "=&z" (flags) - : /* no inputs */ - : "memory" - ); - - return flags; -} - -static inline unsigned long __raw_local_irq_save(void) -{ - unsigned long flags, __dummy; - - __asm__ __volatile__ ( - "stc sr, %1\n\t" - "mov %1, %0\n\t" - "or #0xf0, %0\n\t" - "ldc %0, sr\n\t" - "mov %1, %0\n\t" - "and #0xf0, %0\n\t" - : "=&z" (flags), "=&r" (__dummy) - : /* no inputs */ - : "memory" - ); - - return flags; -} - -#endif /* __ASM_SH_IRQFLAGS_32_H */ diff --git a/include/asm-sh/irqflags_64.h b/include/asm-sh/irqflags_64.h deleted file mode 100644 index 4f6b8a56e7bd..000000000000 --- a/include/asm-sh/irqflags_64.h +++ /dev/null @@ -1,85 +0,0 @@ -#ifndef __ASM_SH_IRQFLAGS_64_H -#define __ASM_SH_IRQFLAGS_64_H - -#include - -#define SR_MASK_LL 0x00000000000000f0LL -#define SR_BL_LL 0x0000000010000000LL - -static inline void raw_local_irq_enable(void) -{ - unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL; - - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "and %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); -} - -static inline void raw_local_irq_disable(void) -{ - unsigned long long __dummy0, __dummy1 = SR_MASK_LL; - - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "or %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); -} - -static inline void set_bl_bit(void) -{ - unsigned long long __dummy0, __dummy1 = SR_BL_LL; - - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "or %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); - -} - -static inline void clear_bl_bit(void) -{ - unsigned long long __dummy0, __dummy1 = ~SR_BL_LL; - - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "and %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); -} - -static inline unsigned long __raw_local_save_flags(void) -{ - unsigned long long __dummy = SR_MASK_LL; - unsigned long flags; - - __asm__ __volatile__ ( - "getcon " __SR ", %0\n\t" - "and %0, %1, %0" - : "=&r" (flags) - : "r" (__dummy)); - - return flags; -} - -static inline unsigned long __raw_local_irq_save(void) -{ - unsigned long long __dummy0, __dummy1 = SR_MASK_LL; - unsigned long flags; - - __asm__ __volatile__ ( - "getcon " __SR ", %1\n\t" - "or %1, r63, %0\n\t" - "or %1, %2, %1\n\t" - "putcon %1, " __SR "\n\t" - "and %0, %2, %0" - : "=&r" (flags), "=&r" (__dummy0) - : "r" (__dummy1)); - - return flags; -} - -#endif /* __ASM_SH_IRQFLAGS_64_H */ diff --git a/include/asm-sh/kdebug.h b/include/asm-sh/kdebug.h deleted file mode 100644 index 49cd69051a88..000000000000 --- a/include/asm-sh/kdebug.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_SH_KDEBUG_H -#define __ASM_SH_KDEBUG_H - -/* Grossly misnamed. */ -enum die_val { - DIE_TRAP, -}; - -#endif /* __ASM_SH_KDEBUG_H */ diff --git a/include/asm-sh/kexec.h b/include/asm-sh/kexec.h deleted file mode 100644 index 00f4260ef09b..000000000000 --- a/include/asm-sh/kexec.h +++ /dev/null @@ -1,62 +0,0 @@ -#ifndef __ASM_SH_KEXEC_H -#define __ASM_SH_KEXEC_H - -#include -#include - -/* - * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return. - * I.e. Maximum page that is mapped directly into kernel memory, - * and kmap is not required. - * - * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct - * calculation for the amount of memory directly mappable into the - * kernel memory space. - */ - -/* Maximum physical address we can use pages from */ -#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) -/* Maximum address we can reach in physical address mode */ -#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) -/* Maximum address we can use for the control code buffer */ -#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE - -#define KEXEC_CONTROL_CODE_SIZE 4096 - -/* The native architecture */ -#define KEXEC_ARCH KEXEC_ARCH_SH - -static inline void crash_setup_regs(struct pt_regs *newregs, - struct pt_regs *oldregs) -{ - if (oldregs) - memcpy(newregs, oldregs, sizeof(*newregs)); - else { - __asm__ __volatile__ ("mov r0, %0" : "=r" (newregs->regs[0])); - __asm__ __volatile__ ("mov r1, %0" : "=r" (newregs->regs[1])); - __asm__ __volatile__ ("mov r2, %0" : "=r" (newregs->regs[2])); - __asm__ __volatile__ ("mov r3, %0" : "=r" (newregs->regs[3])); - __asm__ __volatile__ ("mov r4, %0" : "=r" (newregs->regs[4])); - __asm__ __volatile__ ("mov r5, %0" : "=r" (newregs->regs[5])); - __asm__ __volatile__ ("mov r6, %0" : "=r" (newregs->regs[6])); - __asm__ __volatile__ ("mov r7, %0" : "=r" (newregs->regs[7])); - __asm__ __volatile__ ("mov r8, %0" : "=r" (newregs->regs[8])); - __asm__ __volatile__ ("mov r9, %0" : "=r" (newregs->regs[9])); - __asm__ __volatile__ ("mov r10, %0" : "=r" (newregs->regs[10])); - __asm__ __volatile__ ("mov r11, %0" : "=r" (newregs->regs[11])); - __asm__ __volatile__ ("mov r12, %0" : "=r" (newregs->regs[12])); - __asm__ __volatile__ ("mov r13, %0" : "=r" (newregs->regs[13])); - __asm__ __volatile__ ("mov r14, %0" : "=r" (newregs->regs[14])); - __asm__ __volatile__ ("mov r15, %0" : "=r" (newregs->regs[15])); - - __asm__ __volatile__ ("sts pr, %0" : "=r" (newregs->pr)); - __asm__ __volatile__ ("sts macl, %0" : "=r" (newregs->macl)); - __asm__ __volatile__ ("sts mach, %0" : "=r" (newregs->mach)); - - __asm__ __volatile__ ("stc gbr, %0" : "=r" (newregs->gbr)); - __asm__ __volatile__ ("stc sr, %0" : "=r" (newregs->sr)); - - newregs->pc = (unsigned long)current_text_addr(); - } -} -#endif /* __ASM_SH_KEXEC_H */ diff --git a/include/asm-sh/kgdb.h b/include/asm-sh/kgdb.h deleted file mode 100644 index 24e42078f36f..000000000000 --- a/include/asm-sh/kgdb.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Based on original code by Glenn Engel, Jim Kingdon, - * David Grothe , Tigran Aivazian, and - * Amit S. Kale - * - * Super-H port based on sh-stub.c (Ben Lee and Steve Chamberlain) by - * Henry Bell - * - * Header file for low-level support for remote debug using GDB. - * - */ - -#ifndef __KGDB_H -#define __KGDB_H - -#include - -/* Same as pt_regs but has vbr in place of syscall_nr */ -struct kgdb_regs { - unsigned long regs[16]; - unsigned long pc; - unsigned long pr; - unsigned long sr; - unsigned long gbr; - unsigned long mach; - unsigned long macl; - unsigned long vbr; -}; - -/* State info */ -extern char kgdb_in_gdb_mode; -extern int kgdb_nofault; /* Ignore bus errors (in gdb mem access) */ -extern char in_nmi; /* Debounce flag to prevent NMI reentry*/ - -/* SCI */ -extern int kgdb_portnum; -extern int kgdb_baud; -extern char kgdb_parity; -extern char kgdb_bits; - -/* Init and interface stuff */ -extern int kgdb_init(void); -extern int (*kgdb_getchar)(void); -extern void (*kgdb_putchar)(int); - -/* Trap functions */ -typedef void (kgdb_debug_hook_t)(struct pt_regs *regs); -typedef void (kgdb_bus_error_hook_t)(void); -extern kgdb_debug_hook_t *kgdb_debug_hook; -extern kgdb_bus_error_hook_t *kgdb_bus_err_hook; - -/* Console */ -struct console; -void kgdb_console_write(struct console *co, const char *s, unsigned count); -extern int kgdb_console_setup(struct console *, char *); - -/* Prototypes for jmp fns */ -#define _JBLEN 9 -typedef int jmp_buf[_JBLEN]; -extern void longjmp(jmp_buf __jmpb, int __retval); -extern int setjmp(jmp_buf __jmpb); - -/* Forced breakpoint */ -#define breakpoint() __asm__ __volatile__("trapa #0x3c") - -#endif diff --git a/include/asm-sh/kmap_types.h b/include/asm-sh/kmap_types.h deleted file mode 100644 index 84d565c696be..000000000000 --- a/include/asm-sh/kmap_types.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef __SH_KMAP_TYPES_H -#define __SH_KMAP_TYPES_H - -/* Dummy header just to define km_type. */ - - -#ifdef CONFIG_DEBUG_HIGHMEM -# define D(n) __KM_FENCE_##n , -#else -# define D(n) -#endif - -enum km_type { -D(0) KM_BOUNCE_READ, -D(1) KM_SKB_SUNRPC_DATA, -D(2) KM_SKB_DATA_SOFTIRQ, -D(3) KM_USER0, -D(4) KM_USER1, -D(5) KM_BIO_SRC_IRQ, -D(6) KM_BIO_DST_IRQ, -D(7) KM_PTE0, -D(8) KM_PTE1, -D(9) KM_IRQ0, -D(10) KM_IRQ1, -D(11) KM_SOFTIRQ0, -D(12) KM_SOFTIRQ1, -D(13) KM_TYPE_NR -}; - -#undef D - -#endif diff --git a/include/asm-sh/landisk/gio.h b/include/asm-sh/landisk/gio.h deleted file mode 100644 index 35d7368b718a..000000000000 --- a/include/asm-sh/landisk/gio.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef __ASM_SH_LANDISK_GIO_H -#define __ASM_SH_LANDISK_GIO_H - -#include - -/* version */ -#define VERSION_STR "1.00" - -/* Driver name */ -#define GIO_DRIVER_NAME "/dev/giodrv" - -/* Use 'k' as magic number */ -#define GIODRV_IOC_MAGIC 'k' - -#define GIODRV_IOCRESET _IO(GIODRV_IOC_MAGIC, 0) -/* - * S means "Set" through a ptr, - * T means "Tell" directly - * G means "Get" (to a pointed var) - * Q means "Query", response is on the return value - * X means "eXchange": G and S atomically - * H means "sHift": T and Q atomically - */ -#define GIODRV_IOCSGIODATA1 _IOW(GIODRV_IOC_MAGIC, 1, unsigned char *) -#define GIODRV_IOCGGIODATA1 _IOR(GIODRV_IOC_MAGIC, 2, unsigned char *) -#define GIODRV_IOCSGIODATA2 _IOW(GIODRV_IOC_MAGIC, 3, unsigned short *) -#define GIODRV_IOCGGIODATA2 _IOR(GIODRV_IOC_MAGIC, 4, unsigned short *) -#define GIODRV_IOCSGIODATA4 _IOW(GIODRV_IOC_MAGIC, 5, unsigned long *) -#define GIODRV_IOCGGIODATA4 _IOR(GIODRV_IOC_MAGIC, 6, unsigned long *) -#define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC, 7, unsigned long *) -#define GIODRV_IOCHARDRESET _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */ -#define GIODRV_IOC_MAXNR 8 - -#define GIO_READ 0x00000000 -#define GIO_WRITE 0x00000001 - -#endif /* __ASM_SH_LANDISK_GIO_H */ diff --git a/include/asm-sh/landisk/iodata_landisk.h b/include/asm-sh/landisk/iodata_landisk.h deleted file mode 100644 index 6fb04ab38b9f..000000000000 --- a/include/asm-sh/landisk/iodata_landisk.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef __ASM_SH_IODATA_LANDISK_H -#define __ASM_SH_IODATA_LANDISK_H - -/* - * linux/include/asm-sh/landisk/iodata_landisk.h - * - * Copyright (C) 2000 Atom Create Engineering Co., Ltd. - * - * IO-DATA LANDISK support - */ - -/* Box specific addresses. */ - -#define PA_USB 0xa4000000 /* USB Controller M66590 */ - -#define PA_ATARST 0xb0000000 /* ATA/FATA Access Control Register */ -#define PA_LED 0xb0000001 /* LED Control Register */ -#define PA_STATUS 0xb0000002 /* Switch Status Register */ -#define PA_SHUTDOWN 0xb0000003 /* Shutdown Control Register */ -#define PA_PCIPME 0xb0000004 /* PCI PME Status Register */ -#define PA_IMASK 0xb0000005 /* Interrupt Mask Register */ -/* 2003.10.31 I-O DATA NSD NWG add. for shutdown port clear */ -#define PA_PWRINT_CLR 0xb0000006 /* Shutdown Interrupt clear Register */ - -#define PA_PIDE_OFFSET 0x40 /* CF IDE Offset */ -#define PA_SIDE_OFFSET 0x40 /* HDD IDE Offset */ - -#define IRQ_PCIINTA 5 /* PCI INTA IRQ */ -#define IRQ_PCIINTB 6 /* PCI INTB IRQ */ -#define IRQ_PCIINDC 7 /* PCI INTC IRQ */ -#define IRQ_PCIINTD 8 /* PCI INTD IRQ */ -#define IRQ_ATA 9 /* ATA IRQ */ -#define IRQ_FATA 10 /* FATA IRQ */ -#define IRQ_POWER 11 /* Power Switch IRQ */ -#define IRQ_BUTTON 12 /* USL-5P Button IRQ */ -#define IRQ_FAULT 13 /* USL-5P Fault IRQ */ - -#define __IO_PREFIX landisk -#include - -#endif /* __ASM_SH_IODATA_LANDISK_H */ - diff --git a/include/asm-sh/lboxre2.h b/include/asm-sh/lboxre2.h deleted file mode 100644 index e6d160504923..000000000000 --- a/include/asm-sh/lboxre2.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __ASM_SH_LBOXRE2_H -#define __ASM_SH_LBOXRE2_H - -/* - * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * NTT COMWARE L-BOX RE2 support - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#define IRQ_CF1 9 /* CF1 */ -#define IRQ_CF0 10 /* CF0 */ -#define IRQ_INTD 11 /* INTD */ -#define IRQ_ETH1 12 /* Ether1 */ -#define IRQ_ETH0 13 /* Ether0 */ -#define IRQ_INTA 14 /* INTA */ - -void init_lboxre2_IRQ(void); - -#define __IO_PREFIX lboxre2 -#include - -#endif /* __ASM_SH_LBOXRE2_H */ diff --git a/include/asm-sh/linkage.h b/include/asm-sh/linkage.h deleted file mode 100644 index 3565a4f4009f..000000000000 --- a/include/asm-sh/linkage.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -#define __ALIGN .balign 4 -#define __ALIGN_STR ".balign 4" - -#endif diff --git a/include/asm-sh/local.h b/include/asm-sh/local.h deleted file mode 100644 index 9ed9b9cb459a..000000000000 --- a/include/asm-sh/local.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_SH_LOCAL_H -#define __ASM_SH_LOCAL_H - -#include - -#endif /* __ASM_SH_LOCAL_H */ - diff --git a/include/asm-sh/machvec.h b/include/asm-sh/machvec.h deleted file mode 100644 index b2e4124070ae..000000000000 --- a/include/asm-sh/machvec.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * include/asm-sh/machvec.h - * - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - */ - -#ifndef _ASM_SH_MACHVEC_H -#define _ASM_SH_MACHVEC_H - -#include -#include -#include - -struct device; - -struct sh_machine_vector { - void (*mv_setup)(char **cmdline_p); - const char *mv_name; - int mv_nr_irqs; - - u8 (*mv_inb)(unsigned long); - u16 (*mv_inw)(unsigned long); - u32 (*mv_inl)(unsigned long); - void (*mv_outb)(u8, unsigned long); - void (*mv_outw)(u16, unsigned long); - void (*mv_outl)(u32, unsigned long); - - u8 (*mv_inb_p)(unsigned long); - u16 (*mv_inw_p)(unsigned long); - u32 (*mv_inl_p)(unsigned long); - void (*mv_outb_p)(u8, unsigned long); - void (*mv_outw_p)(u16, unsigned long); - void (*mv_outl_p)(u32, unsigned long); - - void (*mv_insb)(unsigned long, void *dst, unsigned long count); - void (*mv_insw)(unsigned long, void *dst, unsigned long count); - void (*mv_insl)(unsigned long, void *dst, unsigned long count); - void (*mv_outsb)(unsigned long, const void *src, unsigned long count); - void (*mv_outsw)(unsigned long, const void *src, unsigned long count); - void (*mv_outsl)(unsigned long, const void *src, unsigned long count); - - u8 (*mv_readb)(void __iomem *); - u16 (*mv_readw)(void __iomem *); - u32 (*mv_readl)(void __iomem *); - void (*mv_writeb)(u8, void __iomem *); - void (*mv_writew)(u16, void __iomem *); - void (*mv_writel)(u32, void __iomem *); - - int (*mv_irq_demux)(int irq); - - void (*mv_init_irq)(void); - void (*mv_init_pci)(void); - - void (*mv_heartbeat)(void); - - void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size); - void (*mv_ioport_unmap)(void __iomem *); -}; - -extern struct sh_machine_vector sh_mv; - -#define get_system_type() sh_mv.mv_name - -#define __initmv \ - __used __section(.machvec.init) - -#endif /* _ASM_SH_MACHVEC_H */ diff --git a/include/asm-sh/magicpanelr2.h b/include/asm-sh/magicpanelr2.h deleted file mode 100644 index c644a77ee357..000000000000 --- a/include/asm-sh/magicpanelr2.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * include/asm-sh/magicpanelr2.h - * - * Copyright (C) 2007 Markus Brunner, Mark Jonas - * - * I/O addresses and bitmasks for Magic Panel Release 2 board - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef __ASM_SH_MAGICPANELR2_H -#define __ASM_SH_MAGICPANELR2_H - -#include - -#define __IO_PREFIX mpr2 -#include - - -#define SETBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) | mask, reg) -#define SETBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) | mask, reg) -#define SETBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) | mask, reg) -#define CLRBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) & ~mask, reg) -#define CLRBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) & ~mask, reg) -#define CLRBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) & ~mask, reg) - - -#define PA_LED PORT_PADR /* LED */ - - -/* BSC */ -#define CMNCR 0xA4FD0000UL -#define CS0BCR 0xA4FD0004UL -#define CS2BCR 0xA4FD0008UL -#define CS3BCR 0xA4FD000CUL -#define CS4BCR 0xA4FD0010UL -#define CS5ABCR 0xA4FD0014UL -#define CS5BBCR 0xA4FD0018UL -#define CS6ABCR 0xA4FD001CUL -#define CS6BBCR 0xA4FD0020UL -#define CS0WCR 0xA4FD0024UL -#define CS2WCR 0xA4FD0028UL -#define CS3WCR 0xA4FD002CUL -#define CS4WCR 0xA4FD0030UL -#define CS5AWCR 0xA4FD0034UL -#define CS5BWCR 0xA4FD0038UL -#define CS6AWCR 0xA4FD003CUL -#define CS6BWCR 0xA4FD0040UL - - -/* usb */ - -#define PORT_UTRCTL 0xA405012CUL -#define PORT_UCLKCR_W 0xA40A0008UL - -#define INTC_ICR0 0xA414FEE0UL -#define INTC_ICR1 0xA4140010UL -#define INTC_ICR2 0xA4140012UL - -/* MTD */ - -#define MPR2_MTD_BOOTLOADER_SIZE 0x00060000UL -#define MPR2_MTD_KERNEL_SIZE 0x00200000UL - -#endif /* __ASM_SH_MAGICPANELR2_H */ diff --git a/include/asm-sh/mc146818rtc.h b/include/asm-sh/mc146818rtc.h deleted file mode 100644 index 0aee96a97330..000000000000 --- a/include/asm-sh/mc146818rtc.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Machine dependent access functions for RTC registers. - */ -#ifndef _ASM_MC146818RTC_H -#define _ASM_MC146818RTC_H - -#endif /* _ASM_MC146818RTC_H */ diff --git a/include/asm-sh/microdev.h b/include/asm-sh/microdev.h deleted file mode 100644 index 1aed15856e11..000000000000 --- a/include/asm-sh/microdev.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * linux/include/asm-sh/microdev.h - * - * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) - * - * Definitions for the SuperH SH4-202 MicroDev board. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - */ -#ifndef __ASM_SH_MICRODEV_H -#define __ASM_SH_MICRODEV_H - -extern void init_microdev_irq(void); -extern void microdev_print_fpga_intc_status(void); - -/* - * The following are useful macros for manipulating the interrupt - * controller (INTC) on the CPU-board FPGA. should be noted that there - * is an INTC on the FPGA, and a separate INTC on the SH4-202 core - - * these are two different things, both of which need to be prorammed to - * correctly route - unfortunately, they have the same name and - * abbreviations! - */ -#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */ -#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interrupt mask to enable/disable INTC in CPU-board FPGA */ -#define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */ -#define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTSRC_REG (MICRODEV_FPGA_INTC_BASE+0x30ul) /* Interrupt Source Register on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */ - - -/* - * The following are the IRQ numbers for the Linux Kernel for external - * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'. - */ -#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ -#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */ -#define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */ -#define MICRODEV_LINUX_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ -#define MICRODEV_LINUX_IRQ_USB_HC 7 /* on-board USB HC */ -#define MICRODEV_LINUX_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ -#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */ -#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */ - -/* - * The following are the IRQ numbers for the INTC on the FPGA for - * external interrupts. i.e. the bits in the INTC registers in the - * FPGA. - */ -#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ -#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */ -#define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ -#define MICRODEV_FPGA_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ -#define MICRODEV_FPGA_IRQ_IDE1 14 /* SuperIO IDE #1 */ -#define MICRODEV_FPGA_IRQ_IDE2 15 /* SuperIO IDE #2 */ -#define MICRODEV_FPGA_IRQ_USB_HC 16 /* on-board USB HC */ -#define MICRODEV_FPGA_IRQ_ETHERNET 18 /* on-board Ethnernet */ - -#define MICRODEV_IRQ_PCI_INTA 8 -#define MICRODEV_IRQ_PCI_INTB 9 -#define MICRODEV_IRQ_PCI_INTC 10 -#define MICRODEV_IRQ_PCI_INTD 11 - -#define __IO_PREFIX microdev -#include - -#if defined(CONFIG_PCI) -unsigned char microdev_pci_inb(unsigned long port); -unsigned short microdev_pci_inw(unsigned long port); -unsigned long microdev_pci_inl(unsigned long port); -void microdev_pci_outb(unsigned char data, unsigned long port); -void microdev_pci_outw(unsigned short data, unsigned long port); -void microdev_pci_outl(unsigned long data, unsigned long port); -#endif - -#endif /* __ASM_SH_MICRODEV_H */ diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h deleted file mode 100644 index 10016e0f4a4e..000000000000 --- a/include/asm-sh/migor.h +++ /dev/null @@ -1,65 +0,0 @@ -#ifndef __ASM_SH_MIGOR_H -#define __ASM_SH_MIGOR_H - -/* - * linux/include/asm-sh/migor.h - * - * Copyright (C) 2008 Renesas Solutions - * - * Portions Copyright (C) 2007 Nobuhiro Iwamatsu - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#include - -/* GPIO */ -#define PORT_PACR 0xa4050100 -#define PORT_PDCR 0xa4050106 -#define PORT_PECR 0xa4050108 -#define PORT_PHCR 0xa405010e -#define PORT_PJCR 0xa4050110 -#define PORT_PKCR 0xa4050112 -#define PORT_PLCR 0xa4050114 -#define PORT_PMCR 0xa4050116 -#define PORT_PRCR 0xa405011c -#define PORT_PTCR 0xa4050140 -#define PORT_PUCR 0xa4050142 -#define PORT_PVCR 0xa4050144 -#define PORT_PWCR 0xa4050146 -#define PORT_PXCR 0xa4050148 -#define PORT_PYCR 0xa405014a -#define PORT_PZCR 0xa405014c -#define PORT_PADR 0xa4050120 -#define PORT_PHDR 0xa405012e -#define PORT_PTDR 0xa4050160 -#define PORT_PWDR 0xa4050166 - -#define PORT_HIZCRA 0xa4050158 -#define PORT_HIZCRC 0xa405015c - -#define PORT_MSELCRB 0xa4050182 - -#define MSTPCR1 0xa4150034 -#define MSTPCR2 0xa4150038 - -#define PORT_PSELA 0xa405014e -#define PORT_PSELB 0xa4050150 -#define PORT_PSELC 0xa4050152 -#define PORT_PSELD 0xa4050154 -#define PORT_PSELE 0xa4050156 - -#define PORT_HIZCRA 0xa4050158 -#define PORT_HIZCRB 0xa405015a -#define PORT_HIZCRC 0xa405015c - -#define BSC_CS6ABCR 0xfec1001c - -#include - -int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle, - struct sh_mobile_lcdc_sys_bus_ops *sys_ops); - -#endif /* __ASM_SH_MIGOR_H */ diff --git a/include/asm-sh/mman.h b/include/asm-sh/mman.h deleted file mode 100644 index 156eb0225cf6..000000000000 --- a/include/asm-sh/mman.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_SH_MMAN_H -#define __ASM_SH_MMAN_H - -#include - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* __ASM_SH_MMAN_H */ diff --git a/include/asm-sh/mmu.h b/include/asm-sh/mmu.h deleted file mode 100644 index fdcb93bc6d11..000000000000 --- a/include/asm-sh/mmu.h +++ /dev/null @@ -1,76 +0,0 @@ -#ifndef __MMU_H -#define __MMU_H - -/* Default "unsigned long" context */ -typedef unsigned long mm_context_id_t[NR_CPUS]; - -typedef struct { -#ifdef CONFIG_MMU - mm_context_id_t id; - void *vdso; -#else - struct vm_list_struct *vmlist; - unsigned long end_brk; -#endif -#ifdef CONFIG_BINFMT_ELF_FDPIC - unsigned long exec_fdpic_loadmap; - unsigned long interp_fdpic_loadmap; -#endif -} mm_context_t; - -/* - * Privileged Space Mapping Buffer (PMB) definitions - */ -#define PMB_PASCR 0xff000070 -#define PMB_IRMCR 0xff000078 - -#define PMB_ADDR 0xf6100000 -#define PMB_DATA 0xf7100000 -#define PMB_ENTRY_MAX 16 -#define PMB_E_MASK 0x0000000f -#define PMB_E_SHIFT 8 - -#define PMB_SZ_16M 0x00000000 -#define PMB_SZ_64M 0x00000010 -#define PMB_SZ_128M 0x00000080 -#define PMB_SZ_512M 0x00000090 -#define PMB_SZ_MASK PMB_SZ_512M -#define PMB_C 0x00000008 -#define PMB_WT 0x00000001 -#define PMB_UB 0x00000200 -#define PMB_V 0x00000100 - -#define PMB_NO_ENTRY (-1) - -struct pmb_entry; - -struct pmb_entry { - unsigned long vpn; - unsigned long ppn; - unsigned long flags; - - /* - * 0 .. NR_PMB_ENTRIES for specific entry selection, or - * PMB_NO_ENTRY to search for a free one - */ - int entry; - - struct pmb_entry *next; - /* Adjacent entry link for contiguous multi-entry mappings */ - struct pmb_entry *link; -}; - -/* arch/sh/mm/pmb.c */ -int __set_pmb_entry(unsigned long vpn, unsigned long ppn, - unsigned long flags, int *entry); -int set_pmb_entry(struct pmb_entry *pmbe); -void clear_pmb_entry(struct pmb_entry *pmbe); -struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn, - unsigned long flags); -void pmb_free(struct pmb_entry *pmbe); -long pmb_remap(unsigned long virt, unsigned long phys, - unsigned long size, unsigned long flags); -void pmb_unmap(unsigned long addr); - -#endif /* __MMU_H */ - diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h deleted file mode 100644 index 8589a50febd0..000000000000 --- a/include/asm-sh/mmu_context.h +++ /dev/null @@ -1,185 +0,0 @@ -/* - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2003 - 2007 Paul Mundt - * - * ASID handling idea taken from MIPS implementation. - */ -#ifndef __ASM_SH_MMU_CONTEXT_H -#define __ASM_SH_MMU_CONTEXT_H - -#ifdef __KERNEL__ -#include -#include -#include -#include -#include - -/* - * The MMU "context" consists of two things: - * (a) TLB cache version (or round, cycle whatever expression you like) - * (b) ASID (Address Space IDentifier) - */ -#define MMU_CONTEXT_ASID_MASK 0x000000ff -#define MMU_CONTEXT_VERSION_MASK 0xffffff00 -#define MMU_CONTEXT_FIRST_VERSION 0x00000100 -#define NO_CONTEXT 0 - -/* ASID is 8-bit value, so it can't be 0x100 */ -#define MMU_NO_ASID 0x100 - -#define asid_cache(cpu) (cpu_data[cpu].asid_cache) - -#ifdef CONFIG_MMU -#define cpu_context(cpu, mm) ((mm)->context.id[cpu]) - -#define cpu_asid(cpu, mm) \ - (cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK) - -/* - * Virtual Page Number mask - */ -#define MMU_VPN_MASK 0xfffff000 - -#if defined(CONFIG_SUPERH32) -#include "mmu_context_32.h" -#else -#include "mmu_context_64.h" -#endif - -/* - * Get MMU context if needed. - */ -static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu) -{ - unsigned long asid = asid_cache(cpu); - - /* Check if we have old version of context. */ - if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0) - /* It's up to date, do nothing */ - return; - - /* It's old, we need to get new context with new version. */ - if (!(++asid & MMU_CONTEXT_ASID_MASK)) { - /* - * We exhaust ASID of this version. - * Flush all TLB and start new cycle. - */ - flush_tlb_all(); - -#ifdef CONFIG_SUPERH64 - /* - * The SH-5 cache uses the ASIDs, requiring both the I and D - * cache to be flushed when the ASID is exhausted. Weak. - */ - flush_cache_all(); -#endif - - /* - * Fix version; Note that we avoid version #0 - * to distingush NO_CONTEXT. - */ - if (!asid) - asid = MMU_CONTEXT_FIRST_VERSION; - } - - cpu_context(cpu, mm) = asid_cache(cpu) = asid; -} - -/* - * Initialize the context related info for a new mm_struct - * instance. - */ -static inline int init_new_context(struct task_struct *tsk, - struct mm_struct *mm) -{ - int i; - - for (i = 0; i < num_online_cpus(); i++) - cpu_context(i, mm) = NO_CONTEXT; - - return 0; -} - -/* - * After we have set current->mm to a new value, this activates - * the context for the new mm so we see the new mappings. - */ -static inline void activate_context(struct mm_struct *mm, unsigned int cpu) -{ - get_mmu_context(mm, cpu); - set_asid(cpu_asid(cpu, mm)); -} - -static inline void switch_mm(struct mm_struct *prev, - struct mm_struct *next, - struct task_struct *tsk) -{ - unsigned int cpu = smp_processor_id(); - - if (likely(prev != next)) { - cpu_set(cpu, next->cpu_vm_mask); - set_TTB(next->pgd); - activate_context(next, cpu); - } else - if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) - activate_context(next, cpu); -} -#else -#define get_mmu_context(mm) do { } while (0) -#define init_new_context(tsk,mm) (0) -#define destroy_context(mm) do { } while (0) -#define set_asid(asid) do { } while (0) -#define get_asid() (0) -#define cpu_asid(cpu, mm) ({ (void)cpu; 0; }) -#define switch_and_save_asid(asid) (0) -#define set_TTB(pgd) do { } while (0) -#define get_TTB() (0) -#define activate_context(mm,cpu) do { } while (0) -#define switch_mm(prev,next,tsk) do { } while (0) -#endif /* CONFIG_MMU */ - -#define activate_mm(prev, next) switch_mm((prev),(next),NULL) -#define deactivate_mm(tsk,mm) do { } while (0) -#define enter_lazy_tlb(mm,tsk) do { } while (0) - -#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4) -/* - * If this processor has an MMU, we need methods to turn it off/on .. - * paging_init() will also have to be updated for the processor in - * question. - */ -static inline void enable_mmu(void) -{ - unsigned int cpu = smp_processor_id(); - - /* Enable MMU */ - ctrl_outl(MMU_CONTROL_INIT, MMUCR); - ctrl_barrier(); - - if (asid_cache(cpu) == NO_CONTEXT) - asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION; - - set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK); -} - -static inline void disable_mmu(void) -{ - unsigned long cr; - - cr = ctrl_inl(MMUCR); - cr &= ~MMU_CONTROL_INIT; - ctrl_outl(cr, MMUCR); - - ctrl_barrier(); -} -#else -/* - * MMU control handlers for processors lacking memory - * management hardware. - */ -#define enable_mmu() do { } while (0) -#define disable_mmu() do { } while (0) -#endif - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_MMU_CONTEXT_H */ diff --git a/include/asm-sh/mmu_context_32.h b/include/asm-sh/mmu_context_32.h deleted file mode 100644 index f4f9aebd68b7..000000000000 --- a/include/asm-sh/mmu_context_32.h +++ /dev/null @@ -1,47 +0,0 @@ -#ifndef __ASM_SH_MMU_CONTEXT_32_H -#define __ASM_SH_MMU_CONTEXT_32_H - -/* - * Destroy context related info for an mm_struct that is about - * to be put to rest. - */ -static inline void destroy_context(struct mm_struct *mm) -{ - /* Do nothing */ -} - -static inline void set_asid(unsigned long asid) -{ - unsigned long __dummy; - - __asm__ __volatile__ ("mov.l %2, %0\n\t" - "and %3, %0\n\t" - "or %1, %0\n\t" - "mov.l %0, %2" - : "=&r" (__dummy) - : "r" (asid), "m" (__m(MMU_PTEH)), - "r" (0xffffff00)); -} - -static inline unsigned long get_asid(void) -{ - unsigned long asid; - - __asm__ __volatile__ ("mov.l %1, %0" - : "=r" (asid) - : "m" (__m(MMU_PTEH))); - asid &= MMU_CONTEXT_ASID_MASK; - return asid; -} - -/* MMU_TTB is used for optimizing the fault handling. */ -static inline void set_TTB(pgd_t *pgd) -{ - ctrl_outl((unsigned long)pgd, MMU_TTB); -} - -static inline pgd_t *get_TTB(void) -{ - return (pgd_t *)ctrl_inl(MMU_TTB); -} -#endif /* __ASM_SH_MMU_CONTEXT_32_H */ diff --git a/include/asm-sh/mmu_context_64.h b/include/asm-sh/mmu_context_64.h deleted file mode 100644 index 9649f1c07caf..000000000000 --- a/include/asm-sh/mmu_context_64.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef __ASM_SH_MMU_CONTEXT_64_H -#define __ASM_SH_MMU_CONTEXT_64_H - -/* - * sh64-specific mmu_context interface. - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 - 2007 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include - -#define SR_ASID_MASK 0xffffffffff00ffffULL -#define SR_ASID_SHIFT 16 - -/* - * Destroy context related info for an mm_struct that is about - * to be put to rest. - */ -static inline void destroy_context(struct mm_struct *mm) -{ - /* Well, at least free TLB entries */ - flush_tlb_mm(mm); -} - -static inline unsigned long get_asid(void) -{ - unsigned long long sr; - - asm volatile ("getcon " __SR ", %0\n\t" - : "=r" (sr)); - - sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK; - return (unsigned long) sr; -} - -/* Set ASID into SR */ -static inline void set_asid(unsigned long asid) -{ - unsigned long long sr, pc; - - asm volatile ("getcon " __SR ", %0" : "=r" (sr)); - - sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT); - - /* - * It is possible that this function may be inlined and so to avoid - * the assembler reporting duplicate symbols we make use of the - * gas trick of generating symbols using numerics and forward - * reference. - */ - asm volatile ("movi 1, %1\n\t" - "shlli %1, 28, %1\n\t" - "or %0, %1, %1\n\t" - "putcon %1, " __SR "\n\t" - "putcon %0, " __SSR "\n\t" - "movi 1f, %1\n\t" - "ori %1, 1 , %1\n\t" - "putcon %1, " __SPC "\n\t" - "rte\n" - "1:\n\t" - : "=r" (sr), "=r" (pc) : "0" (sr)); -} - -/* arch/sh/kernel/cpu/sh5/entry.S */ -extern unsigned long switch_and_save_asid(unsigned long new_asid); - -/* No spare register to twiddle, so use a software cache */ -extern pgd_t *mmu_pdtp_cache; - -#define set_TTB(pgd) (mmu_pdtp_cache = (pgd)) -#define get_TTB() (mmu_pdtp_cache) - -#endif /* __ASM_SH_MMU_CONTEXT_64_H */ diff --git a/include/asm-sh/mmzone.h b/include/asm-sh/mmzone.h deleted file mode 100644 index 2969253c4042..000000000000 --- a/include/asm-sh/mmzone.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef __ASM_SH_MMZONE_H -#define __ASM_SH_MMZONE_H - -#ifdef __KERNEL__ - -#ifdef CONFIG_NEED_MULTIPLE_NODES -extern struct pglist_data *node_data[]; -#define NODE_DATA(nid) (node_data[nid]) - -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \ - NODE_DATA(nid)->node_spanned_pages) - -static inline int pfn_to_nid(unsigned long pfn) -{ - int nid; - - for (nid = 0; nid < MAX_NUMNODES; nid++) - if (pfn >= node_start_pfn(nid) && pfn <= node_end_pfn(nid)) - break; - - return nid; -} - -static inline struct pglist_data *pfn_to_pgdat(unsigned long pfn) -{ - return NODE_DATA(pfn_to_nid(pfn)); -} - -/* arch/sh/mm/numa.c */ -void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end); -#else -static inline void -setup_bootmem_node(int nid, unsigned long start, unsigned long end) -{ -} -#endif /* CONFIG_NEED_MULTIPLE_NODES */ - -/* Platform specific mem init */ -void __init plat_mem_setup(void); - -/* arch/sh/kernel/setup.c */ -void __init setup_bootmem_allocator(unsigned long start_pfn); -void __init __add_active_range(unsigned int nid, unsigned long start_pfn, - unsigned long end_pfn); - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_MMZONE_H */ diff --git a/include/asm-sh/module.h b/include/asm-sh/module.h deleted file mode 100644 index 46eccd331660..000000000000 --- a/include/asm-sh/module.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef _ASM_SH_MODULE_H -#define _ASM_SH_MODULE_H - -/* - * This file contains the SH architecture specific module code. - */ - -struct mod_arch_specific { - /* Nothing to see here .. */ -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -# ifdef CONFIG_CPU_SH2 -# define MODULE_PROC_FAMILY "SH2LE " -# elif defined CONFIG_CPU_SH3 -# define MODULE_PROC_FAMILY "SH3LE " -# elif defined CONFIG_CPU_SH4 -# define MODULE_PROC_FAMILY "SH4LE " -# elif defined CONFIG_CPU_SH5 -# define MODULE_PROC_FAMILY "SH5LE " -# else -# error unknown processor family -# endif -#else -# ifdef CONFIG_CPU_SH2 -# define MODULE_PROC_FAMILY "SH2BE " -# elif defined CONFIG_CPU_SH3 -# define MODULE_PROC_FAMILY "SH3BE " -# elif defined CONFIG_CPU_SH4 -# define MODULE_PROC_FAMILY "SH4BE " -# elif defined CONFIG_CPU_SH5 -# define MODULE_PROC_FAMILY "SH5BE " -# else -# error unknown processor family -# endif -#endif - -#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY - -#endif /* _ASM_SH_MODULE_H */ diff --git a/include/asm-sh/msgbuf.h b/include/asm-sh/msgbuf.h deleted file mode 100644 index 517432343fb5..000000000000 --- a/include/asm-sh/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef __ASM_SH_MSGBUF_H -#define __ASM_SH_MSGBUF_H - -/* - * The msqid64_ds structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* __ASM_SH_MSGBUF_H */ diff --git a/include/asm-sh/mutex.h b/include/asm-sh/mutex.h deleted file mode 100644 index 458c1f7fbc18..000000000000 --- a/include/asm-sh/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h deleted file mode 100644 index 77fb8bf02e4e..000000000000 --- a/include/asm-sh/page.h +++ /dev/null @@ -1,183 +0,0 @@ -#ifndef __ASM_SH_PAGE_H -#define __ASM_SH_PAGE_H - -/* - * Copyright (C) 1999 Niibe Yutaka - */ - -#include - -/* PAGE_SHIFT determines the page size */ -#if defined(CONFIG_PAGE_SIZE_4KB) -# define PAGE_SHIFT 12 -#elif defined(CONFIG_PAGE_SIZE_8KB) -# define PAGE_SHIFT 13 -#elif defined(CONFIG_PAGE_SIZE_16KB) -# define PAGE_SHIFT 14 -#elif defined(CONFIG_PAGE_SIZE_64KB) -# define PAGE_SHIFT 16 -#else -# error "Bogus kernel page size?" -#endif - -#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) -#define PTE_MASK PAGE_MASK - -#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -#define HPAGE_SHIFT 16 -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) -#define HPAGE_SHIFT 18 -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) -#define HPAGE_SHIFT 20 -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) -#define HPAGE_SHIFT 22 -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) -#define HPAGE_SHIFT 26 -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) -#define HPAGE_SHIFT 29 -#endif - -#ifdef CONFIG_HUGETLB_PAGE -#define HPAGE_SIZE (1UL << HPAGE_SHIFT) -#define HPAGE_MASK (~(HPAGE_SIZE-1)) -#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT-PAGE_SHIFT) -#endif - -#ifndef __ASSEMBLY__ - -extern unsigned long shm_align_mask; -extern unsigned long max_low_pfn, min_low_pfn; -extern unsigned long memory_start, memory_end; - -extern void clear_page(void *to); -extern void copy_page(void *to, void *from); - -#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \ - (defined(CONFIG_CPU_SH5) || defined(CONFIG_CPU_SH4) || \ - defined(CONFIG_SH7705_CACHE_32KB)) -struct page; -struct vm_area_struct; -extern void clear_user_page(void *to, unsigned long address, struct page *page); -extern void copy_user_page(void *to, void *from, unsigned long address, - struct page *page); -#if defined(CONFIG_CPU_SH4) -extern void copy_user_highpage(struct page *to, struct page *from, - unsigned long vaddr, struct vm_area_struct *vma); -#define __HAVE_ARCH_COPY_USER_HIGHPAGE -#endif -#else -#define clear_user_page(page, vaddr, pg) clear_page(page) -#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) -#endif - -/* - * These are used to make use of C type-checking.. - */ -#ifdef CONFIG_X2TLB -typedef struct { unsigned long pte_low, pte_high; } pte_t; -typedef struct { unsigned long long pgprot; } pgprot_t; -typedef struct { unsigned long long pgd; } pgd_t; -#define pte_val(x) \ - ((x).pte_low | ((unsigned long long)(x).pte_high << 32)) -#define __pte(x) \ - ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; }) -#elif defined(CONFIG_SUPERH32) -typedef struct { unsigned long pte_low; } pte_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct { unsigned long pgd; } pgd_t; -#define pte_val(x) ((x).pte_low) -#define __pte(x) ((pte_t) { (x) } ) -#else -typedef struct { unsigned long long pte_low; } pte_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct { unsigned long pgd; } pgd_t; -#define pte_val(x) ((x).pte_low) -#define __pte(x) ((pte_t) { (x) } ) -#endif - -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -typedef struct page *pgtable_t; - -#endif /* !__ASSEMBLY__ */ - -/* - * __MEMORY_START and SIZE are the physical addresses and size of RAM. - */ -#define __MEMORY_START CONFIG_MEMORY_START -#define __MEMORY_SIZE CONFIG_MEMORY_SIZE - -/* - * PAGE_OFFSET is the virtual address of the start of kernel address - * space. - */ -#define PAGE_OFFSET CONFIG_PAGE_OFFSET - -/* - * Virtual to physical RAM address translation. - * - * In 29 bit mode, the physical offset of RAM from address 0 is visible in - * the kernel virtual address space, and thus we don't have to take - * this into account when translating. However in 32 bit mode this offset - * is not visible (it is part of the PMB mapping) and so needs to be - * added or subtracted as required. - */ -#ifdef CONFIG_32BIT -#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START) -#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START)) -#else -#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET) -#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET)) -#endif - -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) - -/* - * PFN = physical frame number (ie PFN 0 == physical address 0) - * PFN_START is the PFN of the first page of RAM. By defining this we - * don't have struct page entries for the portion of address space - * between physical address 0 and the start of RAM. - */ -#define PFN_START (__MEMORY_START >> PAGE_SHIFT) -#define ARCH_PFN_OFFSET (PFN_START) -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#ifdef CONFIG_FLATMEM -#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn) -#endif -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#include -#include - -/* vDSO support */ -#ifdef CONFIG_VSYSCALL -#define __HAVE_ARCH_GATE_AREA -#endif - -/* - * Some drivers need to perform DMA into kmalloc'ed buffers - * and so we have to increase the kmalloc minalign for this. - */ -#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES - -#ifdef CONFIG_SUPERH64 -/* - * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still - * happily generate {ld/st}.q pairs, requiring us to have 8-byte - * alignment to avoid traps. The kmalloc alignment is gauranteed by - * virtue of L1_CACHE_BYTES, requiring this to only be special cased - * for slab caches. - */ -#define ARCH_SLAB_MINALIGN 8 -#endif - -#endif /* __ASM_SH_PAGE_H */ diff --git a/include/asm-sh/param.h b/include/asm-sh/param.h deleted file mode 100644 index ae245afdfd6a..000000000000 --- a/include/asm-sh/param.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef __ASM_SH_PARAM_H -#define __ASM_SH_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ -# define USER_HZ 100 /* User interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* __ASM_SH_PARAM_H */ diff --git a/include/asm-sh/parport.h b/include/asm-sh/parport.h deleted file mode 100644 index f67ba60a2acd..000000000000 --- a/include/asm-sh/parport.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 1999, 2000 Tim Waugh - * - * This file should only be included by drivers/parport/parport_pc.c. - */ -#ifndef __ASM_SH_PARPORT_H -#define __ASM_SH_PARPORT_H - -static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma); - -static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma) -{ - return parport_pc_find_isa_ports(autoirq, autodma); -} - -#endif /* __ASM_SH_PARPORT_H */ diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h deleted file mode 100644 index df1d383e18a5..000000000000 --- a/include/asm-sh/pci.h +++ /dev/null @@ -1,144 +0,0 @@ -#ifndef __ASM_SH_PCI_H -#define __ASM_SH_PCI_H - -#ifdef __KERNEL__ - -#include - -/* Can be used to override the logic in pci_scan_bus for skipping - already-configured bus numbers - to be used for buggy BIOSes - or architectures with incomplete PCI setup by the loader */ - -#define pcibios_assign_all_busses() 1 -#define pcibios_scan_all_fns(a, b) 0 - -/* - * A board can define one or more PCI channels that represent built-in (or - * external) PCI controllers. - */ -struct pci_channel { - struct pci_ops *pci_ops; - struct resource *io_resource; - struct resource *mem_resource; - int first_devfn; - int last_devfn; -}; - -/* - * Each board initializes this array and terminates it with a NULL entry. - */ -extern struct pci_channel board_pci_channels[]; - -#define PCIBIOS_MIN_IO board_pci_channels->io_resource->start -#define PCIBIOS_MIN_MEM board_pci_channels->mem_resource->start - -/* - * I/O routine helpers - */ -#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785) -#define PCI_IO_AREA 0xFE400000 -#define PCI_IO_SIZE 0x00400000 -#elif defined(CONFIG_CPU_SH5) -extern unsigned long PCI_IO_AREA; -#define PCI_IO_SIZE 0x00010000 -#else -#define PCI_IO_AREA 0xFE240000 -#define PCI_IO_SIZE 0x00040000 -#endif - -#define PCI_MEM_SIZE 0x01000000 - -#define SH4_PCIIOBR_MASK 0xFFFC0000 -#define pci_ioaddr(addr) (PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK)) - -#if defined(CONFIG_PCI) -#define is_pci_ioaddr(port) \ - (((port) >= PCIBIOS_MIN_IO) && \ - ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE))) -#define is_pci_memaddr(port) \ - (((port) >= PCIBIOS_MIN_MEM) && \ - ((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE))) -#else -#define is_pci_ioaddr(port) (0) -#define is_pci_memaddr(port) (0) -#endif - -struct pci_dev; - -extern void pcibios_set_master(struct pci_dev *dev); - -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - -/* Dynamic DMA mapping stuff. - * SuperH has everything mapped statically like x86. - */ - -/* The PCI address space does equal the physical memory - * address space. The networking and block device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (1) - -#include -#include -#include -#include -#include - -/* pci_unmap_{single,page} being a nop depends upon the - * configuration. - */ -#ifdef CONFIG_SH_PCIDMA_NONCOHERENT -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ - dma_addr_t ADDR_NAME; -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ - __u32 LEN_NAME; -#define pci_unmap_addr(PTR, ADDR_NAME) \ - ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ - (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) \ - ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ - (((PTR)->LEN_NAME) = (VAL)) -#else -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) -#endif - -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - *strat = PCI_DMA_BURST_INFINITY; - *strategy_parameter = ~0UL; -} -#endif - -/* Board-specific fixup routines. */ -void pcibios_fixup(void); -int pcibios_init_platform(void); -int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin); - -#ifdef CONFIG_PCI_AUTO -int pciauto_assign_resources(int busno, struct pci_channel *hose); -#endif - -#endif /* __KERNEL__ */ - -/* generic pci stuff */ -#include - -/* generic DMA-mapping stuff */ -#include - -#endif /* __ASM_SH_PCI_H */ - diff --git a/include/asm-sh/percpu.h b/include/asm-sh/percpu.h deleted file mode 100644 index 4db4b39a4399..000000000000 --- a/include/asm-sh/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARCH_SH_PERCPU -#define __ARCH_SH_PERCPU - -#include - -#endif /* __ARCH_SH_PERCPU */ diff --git a/include/asm-sh/pgalloc.h b/include/asm-sh/pgalloc.h deleted file mode 100644 index 84dd2db7104c..000000000000 --- a/include/asm-sh/pgalloc.h +++ /dev/null @@ -1,96 +0,0 @@ -#ifndef __ASM_SH_PGALLOC_H -#define __ASM_SH_PGALLOC_H - -#include -#include - -#define QUICK_PGD 0 /* We preserve special mappings over free */ -#define QUICK_PT 1 /* Other page table pages that are zero on free */ - -static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, - pte_t *pte) -{ - set_pmd(pmd, __pmd((unsigned long)pte)); -} - -static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, - pgtable_t pte) -{ - set_pmd(pmd, __pmd((unsigned long)page_address(pte))); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -static inline void pgd_ctor(void *x) -{ - pgd_t *pgd = x; - - memcpy(pgd + USER_PTRS_PER_PGD, - swapper_pg_dir + USER_PTRS_PER_PGD, - (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); -} - -/* - * Allocate and free page tables. - */ -static inline pgd_t *pgd_alloc(struct mm_struct *mm) -{ - return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor); -} - -static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - quicklist_free(QUICK_PGD, NULL, pgd); -} - -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long address) -{ - return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); -} - -static inline pgtable_t pte_alloc_one(struct mm_struct *mm, - unsigned long address) -{ - struct page *page; - void *pg; - - pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); - if (!pg) - return NULL; - page = virt_to_page(pg); - pgtable_page_ctor(page); - return page; -} - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - quicklist_free(QUICK_PT, NULL, pte); -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t pte) -{ - pgtable_page_dtor(pte); - quicklist_free_page(QUICK_PT, NULL, pte); -} - -#define __pte_free_tlb(tlb,pte) \ -do { \ - pgtable_page_dtor(pte); \ - tlb_remove_page((tlb), (pte)); \ -} while (0) - -/* - * allocating and freeing a pmd is trivial: the 1-entry pmd is - * inside the pgd, so has no extra memory associated with it. - */ - -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb,x) do { } while (0) - -static inline void check_pgt_cache(void) -{ - quicklist_trim(QUICK_PGD, NULL, 25, 16); - quicklist_trim(QUICK_PT, NULL, 25, 16); -} - -#endif /* __ASM_SH_PGALLOC_H */ diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h deleted file mode 100644 index a4a8f8b93463..000000000000 --- a/include/asm-sh/pgtable.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This file contains the functions and defines necessary to modify and - * use the SuperH page table tree. - * - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2002 - 2007 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of this - * archive for more details. - */ -#ifndef __ASM_SH_PGTABLE_H -#define __ASM_SH_PGTABLE_H - -#include -#include - -#ifndef __ASSEMBLY__ -#include -#include - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) - -#endif /* !__ASSEMBLY__ */ - -/* - * Effective and physical address definitions, to aid with sign - * extension. - */ -#define NEFF 32 -#define NEFF_SIGN (1LL << (NEFF - 1)) -#define NEFF_MASK (-1LL << NEFF) - -#ifdef CONFIG_29BIT -#define NPHYS 29 -#else -#define NPHYS 32 -#endif - -#define NPHYS_SIGN (1LL << (NPHYS - 1)) -#define NPHYS_MASK (-1LL << NPHYS) - -/* - * traditional two-level paging structure - */ -/* PTE bits */ -#if defined(CONFIG_X2TLB) || defined(CONFIG_SUPERH64) -# define PTE_MAGNITUDE 3 /* 64-bit PTEs on extended mode SH-X2 TLB */ -#else -# define PTE_MAGNITUDE 2 /* 32-bit PTEs */ -#endif -#define PTE_SHIFT PAGE_SHIFT -#define PTE_BITS (PTE_SHIFT - PTE_MAGNITUDE) - -/* PGD bits */ -#define PGDIR_SHIFT (PTE_SHIFT + PTE_BITS) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* Entries per level */ -#define PTRS_PER_PTE (PAGE_SIZE / (1 << PTE_MAGNITUDE)) -#define PTRS_PER_PGD (PAGE_SIZE / sizeof(pgd_t)) - -#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -#ifdef CONFIG_32BIT -#define PHYS_ADDR_MASK 0xffffffff -#else -#define PHYS_ADDR_MASK 0x1fffffff -#endif - -#define PTE_PHYS_MASK (PHYS_ADDR_MASK & PAGE_MASK) - -#ifdef CONFIG_SUPERH32 -#define VMALLOC_START (P3SEG) -#else -#define VMALLOC_START (0xf0000000) -#endif -#define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE) - -#if defined(CONFIG_SUPERH32) -#include -#else -#include -#endif - -/* - * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page - * protection for execute, and considers it the same as a read. Also, write - * permission implies read permission. This is the closest we can get.. - * - * SH-X2 (SH7785) and later parts take this to the opposite end of the extreme, - * not only supporting separate execute, read, and write bits, but having - * completely separate permission bits for user and kernel space. - */ - /*xwr*/ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY -#define __P100 PAGE_EXECREAD -#define __P101 PAGE_EXECREAD -#define __P110 PAGE_COPY -#define __P111 PAGE_COPY - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY -#define __S010 PAGE_WRITEONLY -#define __S011 PAGE_SHARED -#define __S100 PAGE_EXECREAD -#define __S101 PAGE_EXECREAD -#define __S110 PAGE_RWX -#define __S111 PAGE_RWX - -typedef pte_t *pte_addr_t; - -#define kern_addr_valid(addr) (1) - -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) - -#define pte_pfn(x) ((unsigned long)(((x).pte_low >> PAGE_SHIFT))) - -/* - * No page table caches to initialise - */ -#define pgtable_cache_init() do { } while (0) - -#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \ - defined(CONFIG_SH7705_CACHE_32KB)) -struct mm_struct; -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); -#endif - -struct vm_area_struct; -extern void update_mmu_cache(struct vm_area_struct * vma, - unsigned long address, pte_t pte); -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -extern void paging_init(void); -extern void page_table_range_init(unsigned long start, unsigned long end, - pgd_t *pgd); - -#include - -#endif /* __ASM_SH_PGTABLE_H */ diff --git a/include/asm-sh/pgtable_32.h b/include/asm-sh/pgtable_32.h deleted file mode 100644 index 72ea209195bd..000000000000 --- a/include/asm-sh/pgtable_32.h +++ /dev/null @@ -1,479 +0,0 @@ -#ifndef __ASM_SH_PGTABLE_32_H -#define __ASM_SH_PGTABLE_32_H - -/* - * Linux PTEL encoding. - * - * Hardware and software bit definitions for the PTEL value (see below for - * notes on SH-X2 MMUs and 64-bit PTEs): - * - * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4). - * - * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the - * hardware PTEL value can't have the SH-bit set when MMUCR.IX is set, - * which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT). - * - * In order to keep this relatively clean, do not use these for defining - * SH-3 specific flags until all of the other unused bits have been - * exhausted. - * - * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE. - * - * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages. - * Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused. - * - * - On 29 bit platforms, bits 31 to 29 are used for the space attributes - * and timing control which (together with bit 0) are moved into the - * old-style PTEA on the parts that support it. - * - * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day. - * - * SH-X2 MMUs and extended PTEs - * - * SH-X2 supports an extended mode TLB with split data arrays due to the - * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and - * SZ bit placeholders still exist in data array 1, but are implemented as - * reserved bits, with the real logic existing in data array 2. - * - * The downside to this is that we can no longer fit everything in to a 32-bit - * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus - * side, this gives us quite a few spare bits to play with for future usage. - */ -/* Legacy and compat mode bits */ -#define _PAGE_WT 0x001 /* WT-bit on SH-4, 0 on SH-3 */ -#define _PAGE_HW_SHARED 0x002 /* SH-bit : shared among processes */ -#define _PAGE_DIRTY 0x004 /* D-bit : page changed */ -#define _PAGE_CACHABLE 0x008 /* C-bit : cachable */ -#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */ -#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */ -#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed*/ -#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */ -#define _PAGE_PRESENT 0x100 /* V-bit : page is valid */ -#define _PAGE_PROTNONE 0x200 /* software: if not present */ -#define _PAGE_ACCESSED 0x400 /* software: page referenced */ -#define _PAGE_FILE _PAGE_WT /* software: pagecache or swap? */ - -#define _PAGE_SZ_MASK (_PAGE_SZ0 | _PAGE_SZ1) -#define _PAGE_PR_MASK (_PAGE_RW | _PAGE_USER) - -/* Extended mode bits */ -#define _PAGE_EXT_ESZ0 0x0010 /* ESZ0-bit: Size of page */ -#define _PAGE_EXT_ESZ1 0x0020 /* ESZ1-bit: Size of page */ -#define _PAGE_EXT_ESZ2 0x0040 /* ESZ2-bit: Size of page */ -#define _PAGE_EXT_ESZ3 0x0080 /* ESZ3-bit: Size of page */ - -#define _PAGE_EXT_USER_EXEC 0x0100 /* EPR0-bit: User space executable */ -#define _PAGE_EXT_USER_WRITE 0x0200 /* EPR1-bit: User space writable */ -#define _PAGE_EXT_USER_READ 0x0400 /* EPR2-bit: User space readable */ - -#define _PAGE_EXT_KERN_EXEC 0x0800 /* EPR3-bit: Kernel space executable */ -#define _PAGE_EXT_KERN_WRITE 0x1000 /* EPR4-bit: Kernel space writable */ -#define _PAGE_EXT_KERN_READ 0x2000 /* EPR5-bit: Kernel space readable */ - -/* Wrapper for extended mode pgprot twiddling */ -#define _PAGE_EXT(x) ((unsigned long long)(x) << 32) - -/* software: moves to PTEA.TC (Timing Control) */ -#define _PAGE_PCC_AREA5 0x00000000 /* use BSC registers for area5 */ -#define _PAGE_PCC_AREA6 0x80000000 /* use BSC registers for area6 */ - -/* software: moves to PTEA.SA[2:0] (Space Attributes) */ -#define _PAGE_PCC_IODYN 0x00000001 /* IO space, dynamically sized bus */ -#define _PAGE_PCC_IO8 0x20000000 /* IO space, 8 bit bus */ -#define _PAGE_PCC_IO16 0x20000001 /* IO space, 16 bit bus */ -#define _PAGE_PCC_COM8 0x40000000 /* Common Memory space, 8 bit bus */ -#define _PAGE_PCC_COM16 0x40000001 /* Common Memory space, 16 bit bus */ -#define _PAGE_PCC_ATR8 0x60000000 /* Attribute Memory space, 8 bit bus */ -#define _PAGE_PCC_ATR16 0x60000001 /* Attribute Memory space, 6 bit bus */ - -/* Mask which drops unused bits from the PTEL value */ -#if defined(CONFIG_CPU_SH3) -#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED| \ - _PAGE_FILE | _PAGE_SZ1 | \ - _PAGE_HW_SHARED) -#elif defined(CONFIG_X2TLB) -/* Get rid of the legacy PR/SZ bits when using extended mode */ -#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | \ - _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK) -#else -#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE) -#endif - -#define _PAGE_FLAGS_HARDWARE_MASK (PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS)) - -/* Hardware flags, page size encoding */ -#if !defined(CONFIG_MMU) -# define _PAGE_FLAGS_HARD 0ULL -#elif defined(CONFIG_X2TLB) -# if defined(CONFIG_PAGE_SIZE_4KB) -# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ0) -# elif defined(CONFIG_PAGE_SIZE_8KB) -# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ1) -# elif defined(CONFIG_PAGE_SIZE_64KB) -# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ2) -# endif -#else -# if defined(CONFIG_PAGE_SIZE_4KB) -# define _PAGE_FLAGS_HARD _PAGE_SZ0 -# elif defined(CONFIG_PAGE_SIZE_64KB) -# define _PAGE_FLAGS_HARD _PAGE_SZ1 -# endif -#endif - -#if defined(CONFIG_X2TLB) -# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2) -# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) -# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2) -# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) -# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2) -# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) -# define _PAGE_SZHUGE (_PAGE_EXT_ESZ3) -# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) -# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3) -# endif -#else -# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -# define _PAGE_SZHUGE (_PAGE_SZ1) -# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) -# define _PAGE_SZHUGE (_PAGE_SZ0 | _PAGE_SZ1) -# endif -#endif - -/* - * Stub out _PAGE_SZHUGE if we don't have a good definition for it, - * to make pte_mkhuge() happy. - */ -#ifndef _PAGE_SZHUGE -# define _PAGE_SZHUGE (_PAGE_FLAGS_HARD) -#endif - -#define _PAGE_CHG_MASK \ - (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY) - -#ifndef __ASSEMBLY__ - -#if defined(CONFIG_X2TLB) /* SH-X2 TLB */ -#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD) - -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_USER_READ | \ - _PAGE_EXT_USER_WRITE)) - -#define PAGE_EXECREAD __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \ - _PAGE_EXT_KERN_READ | \ - _PAGE_EXT_USER_EXEC | \ - _PAGE_EXT_USER_READ)) - -#define PAGE_COPY PAGE_EXECREAD - -#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_USER_READ)) - -#define PAGE_WRITEONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_USER_WRITE)) - -#define PAGE_RWX __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_EXEC | \ - _PAGE_EXT_USER_WRITE | \ - _PAGE_EXT_USER_READ | \ - _PAGE_EXT_USER_EXEC)) - -#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ - _PAGE_DIRTY | _PAGE_ACCESSED | \ - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_KERN_EXEC)) - -#define PAGE_KERNEL_NOCACHE \ - __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ - _PAGE_ACCESSED | _PAGE_HW_SHARED | \ - _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_KERN_EXEC)) - -#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ - _PAGE_DIRTY | _PAGE_ACCESSED | \ - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_EXEC)) - -#define PAGE_KERNEL_PCC(slot, type) \ - __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_KERN_EXEC) \ - (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ - (type)) - -#elif defined(CONFIG_MMU) /* SH-X TLB */ -#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD) - -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \ - _PAGE_CACHABLE | _PAGE_ACCESSED | \ - _PAGE_FLAGS_HARD) - -#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD) - -#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD) - -#define PAGE_EXECREAD PAGE_READONLY -#define PAGE_RWX PAGE_SHARED -#define PAGE_WRITEONLY PAGE_SHARED - -#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \ - _PAGE_DIRTY | _PAGE_ACCESSED | \ - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) - -#define PAGE_KERNEL_NOCACHE \ - __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ - _PAGE_ACCESSED | _PAGE_HW_SHARED | \ - _PAGE_FLAGS_HARD) - -#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ - _PAGE_DIRTY | _PAGE_ACCESSED | \ - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) - -#define PAGE_KERNEL_PCC(slot, type) \ - __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ - (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ - (type)) -#else /* no mmu */ -#define PAGE_NONE __pgprot(0) -#define PAGE_SHARED __pgprot(0) -#define PAGE_COPY __pgprot(0) -#define PAGE_EXECREAD __pgprot(0) -#define PAGE_RWX __pgprot(0) -#define PAGE_READONLY __pgprot(0) -#define PAGE_WRITEONLY __pgprot(0) -#define PAGE_KERNEL __pgprot(0) -#define PAGE_KERNEL_NOCACHE __pgprot(0) -#define PAGE_KERNEL_RO __pgprot(0) - -#define PAGE_KERNEL_PCC(slot, type) \ - __pgprot(0) -#endif - -#endif /* __ASSEMBLY__ */ - -#ifndef __ASSEMBLY__ - -/* - * Certain architectures need to do special things when PTEs - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -#ifdef CONFIG_X2TLB -static inline void set_pte(pte_t *ptep, pte_t pte) -{ - ptep->pte_high = pte.pte_high; - smp_wmb(); - ptep->pte_low = pte.pte_low; -} -#else -#define set_pte(pteptr, pteval) (*(pteptr) = pteval) -#endif - -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) - -/* - * (pmds are folded into pgds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) - -#define pfn_pte(pfn, prot) \ - __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) \ - __pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) - -#define pte_none(x) (!pte_val(x)) -#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE)) - -#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) - -#define pmd_none(x) (!pmd_val(x)) -#define pmd_present(x) (pmd_val(x)) -#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) -#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK) - -#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) -#define pte_page(x) pfn_to_page(pte_pfn(x)) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -#define pte_not_present(pte) (!((pte).pte_low & _PAGE_PRESENT)) -#define pte_dirty(pte) ((pte).pte_low & _PAGE_DIRTY) -#define pte_young(pte) ((pte).pte_low & _PAGE_ACCESSED) -#define pte_file(pte) ((pte).pte_low & _PAGE_FILE) -#define pte_special(pte) (0) - -#ifdef CONFIG_X2TLB -#define pte_write(pte) ((pte).pte_high & _PAGE_EXT_USER_WRITE) -#else -#define pte_write(pte) ((pte).pte_low & _PAGE_RW) -#endif - -#define PTE_BIT_FUNC(h,fn,op) \ -static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; } - -#ifdef CONFIG_X2TLB -/* - * We cheat a bit in the SH-X2 TLB case. As the permission bits are - * individually toggled (and user permissions are entirely decoupled from - * kernel permissions), we attempt to couple them a bit more sanely here. - */ -PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE); -PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE); -PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE); -#else -PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW); -PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW); -PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE); -#endif - -PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY); -PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY); -PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED); -PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED); - -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - -/* - * Macro and implementation to make a page protection as uncachable. - */ -#define pgprot_writecombine(prot) \ - __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) - -#define pgprot_noncached pgprot_writecombine - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - * - * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) - */ -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte.pte_low &= _PAGE_CHG_MASK; - pte.pte_low |= pgprot_val(newprot); - -#ifdef CONFIG_X2TLB - pte.pte_high |= pgprot_val(newprot) >> 32; -#endif - - return pte; -} - -#define pmd_page_vaddr(pmd) ((unsigned long)pmd_val(pmd)) -#define pmd_page(pmd) (virt_to_page(pmd_val(pmd))) - -/* to find an entry in a page-table-directory. */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) -#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) - -/* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* Find an entry in the third-level page table.. */ -#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset_kernel(dir, address) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) -#define pte_offset_map(dir, address) pte_offset_kernel(dir, address) -#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address) - -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) - -#ifdef CONFIG_X2TLB -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \ - &(e), (e).pte_high, (e).pte_low) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e)) -#else -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) -#endif - -/* - * Encode and de-code a swap entry - * - * Constraints: - * _PAGE_FILE at bit 0 - * _PAGE_PRESENT at bit 8 - * _PAGE_PROTNONE at bit 9 - * - * For the normal case, we encode the swap type into bits 0:7 and the - * swap offset into bits 10:30. For the 64-bit PTE case, we keep the - * preserved bits in the low 32-bits and use the upper 32 as the swap - * offset (along with a 5-bit type), following the same approach as x86 - * PAE. This keeps the logic quite simple, and allows for a full 32 - * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with - * in the pte_low case. - * - * As is evident by the Alpha code, if we ever get a 64-bit unsigned - * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes - * much cleaner.. - * - * NOTE: We should set ZEROs at the position of _PAGE_PRESENT - * and _PAGE_PROTNONE bits - */ -#ifdef CONFIG_X2TLB -#define __swp_type(x) ((x).val & 0x1f) -#define __swp_offset(x) ((x).val >> 5) -#define __swp_entry(type, offset) ((swp_entry_t){ (type) | (offset) << 5}) -#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high }) -#define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val }) - -/* - * Encode and decode a nonlinear file mapping entry - */ -#define pte_to_pgoff(pte) ((pte).pte_high) -#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) }) - -#define PTE_FILE_MAX_BITS 32 -#else -#define __swp_type(x) ((x).val & 0xff) -#define __swp_offset(x) ((x).val >> 10) -#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10}) - -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 }) - -/* - * Encode and decode a nonlinear file mapping entry - */ -#define PTE_FILE_MAX_BITS 29 -#define pte_to_pgoff(pte) (pte_val(pte) >> 1) -#define pgoff_to_pte(off) ((pte_t) { ((off) << 1) | _PAGE_FILE }) -#endif - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH_PGTABLE_32_H */ diff --git a/include/asm-sh/pgtable_64.h b/include/asm-sh/pgtable_64.h deleted file mode 100644 index c78990cda557..000000000000 --- a/include/asm-sh/pgtable_64.h +++ /dev/null @@ -1,314 +0,0 @@ -#ifndef __ASM_SH_PGTABLE_64_H -#define __ASM_SH_PGTABLE_64_H - -/* - * include/asm-sh/pgtable_64.h - * - * This file contains the functions and defines necessary to modify and use - * the SuperH page table tree. - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - * Copyright (C) 2003, 2004 Richard Curnow - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include - -/* - * Error outputs. - */ -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - -/* - * Table setting routines. Used within arch/mm only. - */ -#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) - -static __inline__ void set_pte(pte_t *pteptr, pte_t pteval) -{ - unsigned long long x = ((unsigned long long) pteval.pte_low); - unsigned long long *xp = (unsigned long long *) pteptr; - /* - * Sign-extend based on NPHYS. - */ - *(xp) = (x & NPHYS_SIGN) ? (x | NPHYS_MASK) : x; -} -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) - -static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep) -{ - pmd_val(*pmdp) = (unsigned long) ptep; -} - -/* - * PGD defines. Top level. - */ - -/* To find an entry in a generic PGD. */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) -#define __pgd_offset(address) pgd_index(address) -#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) - -/* To find an entry in a kernel PGD. */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* - * PMD level access routines. Same notes as above. - */ -#define _PMD_EMPTY 0x0 -/* Either the PMD is empty or present, it's not paged out */ -#define pmd_present(pmd_entry) (pmd_val(pmd_entry) & _PAGE_PRESENT) -#define pmd_clear(pmd_entry_p) (set_pmd((pmd_entry_p), __pmd(_PMD_EMPTY))) -#define pmd_none(pmd_entry) (pmd_val((pmd_entry)) == _PMD_EMPTY) -#define pmd_bad(pmd_entry) ((pmd_val(pmd_entry) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) - -#define pmd_page_vaddr(pmd_entry) \ - ((unsigned long) __va(pmd_val(pmd_entry) & PAGE_MASK)) - -#define pmd_page(pmd) \ - (virt_to_page(pmd_val(pmd))) - -/* PMD to PTE dereferencing */ -#define pte_index(address) \ - ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) - -#define pte_offset_kernel(dir, addr) \ - ((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr))) - -#define pte_offset_map(dir,addr) pte_offset_kernel(dir, addr) -#define pte_offset_map_nested(dir,addr) pte_offset_kernel(dir, addr) -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) - -#ifndef __ASSEMBLY__ -#define IOBASE_VADDR 0xff000000 -#define IOBASE_END 0xffffffff - -/* - * PTEL coherent flags. - * See Chapter 17 ST50 CPU Core Volume 1, Architecture. - */ -/* The bits that are required in the SH-5 TLB are placed in the h/w-defined - positions, to avoid expensive bit shuffling on every refill. The remaining - bits are used for s/w purposes and masked out on each refill. - - Note, the PTE slots are used to hold data of type swp_entry_t when a page is - swapped out. Only the _PAGE_PRESENT flag is significant when the page is - swapped out, and it must be placed so that it doesn't overlap either the - type or offset fields of swp_entry_t. For x86, offset is at [31:8] and type - at [6:1], with _PAGE_PRESENT at bit 0 for both pte_t and swp_entry_t. This - scheme doesn't map to SH-5 because bit [0] controls cacheability. So bit - [2] is used for _PAGE_PRESENT and the type field of swp_entry_t is split - into 2 pieces. That is handled by SWP_ENTRY and SWP_TYPE below. */ -#define _PAGE_WT 0x001 /* CB0: if cacheable, 1->write-thru, 0->write-back */ -#define _PAGE_DEVICE 0x001 /* CB0: if uncacheable, 1->device (i.e. no write-combining or reordering at bus level) */ -#define _PAGE_CACHABLE 0x002 /* CB1: uncachable/cachable */ -#define _PAGE_PRESENT 0x004 /* software: page referenced */ -#define _PAGE_FILE 0x004 /* software: only when !present */ -#define _PAGE_SIZE0 0x008 /* SZ0-bit : size of page */ -#define _PAGE_SIZE1 0x010 /* SZ1-bit : size of page */ -#define _PAGE_SHARED 0x020 /* software: reflects PTEH's SH */ -#define _PAGE_READ 0x040 /* PR0-bit : read access allowed */ -#define _PAGE_EXECUTE 0x080 /* PR1-bit : execute access allowed */ -#define _PAGE_WRITE 0x100 /* PR2-bit : write access allowed */ -#define _PAGE_USER 0x200 /* PR3-bit : user space access allowed */ -#define _PAGE_DIRTY 0x400 /* software: page accessed in write */ -#define _PAGE_ACCESSED 0x800 /* software: page referenced */ - -/* Mask which drops software flags */ -#define _PAGE_FLAGS_HARDWARE_MASK 0xfffffffffffff3dbLL - -/* - * HugeTLB support - */ -#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -#define _PAGE_SZHUGE (_PAGE_SIZE0) -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) -#define _PAGE_SZHUGE (_PAGE_SIZE1) -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) -#define _PAGE_SZHUGE (_PAGE_SIZE0 | _PAGE_SIZE1) -#endif - -/* - * Stub out _PAGE_SZHUGE if we don't have a good definition for it, - * to make pte_mkhuge() happy. - */ -#ifndef _PAGE_SZHUGE -# define _PAGE_SZHUGE (0) -#endif - -/* - * Default flags for a Kernel page. - * This is fundametally also SHARED because the main use of this define - * (other than for PGD/PMD entries) is for the VMALLOC pool which is - * contextless. - * - * _PAGE_EXECUTE is required for modules - * - */ -#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ - _PAGE_EXECUTE | \ - _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_DIRTY | \ - _PAGE_SHARED) - -/* Default flags for a User page */ -#define _PAGE_TABLE (_KERNPG_TABLE | _PAGE_USER) - -#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) - -/* - * We have full permissions (Read/Write/Execute/Shared). - */ -#define _PAGE_COMMON (_PAGE_PRESENT | _PAGE_USER | \ - _PAGE_CACHABLE | _PAGE_ACCESSED) - -#define PAGE_NONE __pgprot(_PAGE_CACHABLE | _PAGE_ACCESSED) -#define PAGE_SHARED __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_WRITE | \ - _PAGE_SHARED) -#define PAGE_EXECREAD __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_EXECUTE) - -/* - * We need to include PAGE_EXECUTE in PAGE_COPY because it is the default - * protection mode for the stack. - */ -#define PAGE_COPY PAGE_EXECREAD - -#define PAGE_READONLY __pgprot(_PAGE_COMMON | _PAGE_READ) -#define PAGE_WRITEONLY __pgprot(_PAGE_COMMON | _PAGE_WRITE) -#define PAGE_RWX __pgprot(_PAGE_COMMON | _PAGE_READ | \ - _PAGE_WRITE | _PAGE_EXECUTE) -#define PAGE_KERNEL __pgprot(_KERNPG_TABLE) - -#define PAGE_KERNEL_NOCACHE \ - __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ - _PAGE_EXECUTE | _PAGE_ACCESSED | \ - _PAGE_DIRTY | _PAGE_SHARED) - -/* Make it a device mapping for maximum safety (e.g. for mapping device - registers into user-space via /dev/map). */ -#define pgprot_noncached(x) __pgprot(((x).pgprot & ~(_PAGE_CACHABLE)) | _PAGE_DEVICE) -#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) - -/* - * Handling allocation failures during page table setup. - */ -extern void __handle_bad_pmd_kernel(pmd_t * pmd); -#define __handle_bad_pmd(x) __handle_bad_pmd_kernel(x) - -/* - * PTE level access routines. - * - * Note1: - * It's the tree walk leaf. This is physical address to be stored. - * - * Note 2: - * Regarding the choice of _PTE_EMPTY: - - We must choose a bit pattern that cannot be valid, whether or not the page - is present. bit[2]==1 => present, bit[2]==0 => swapped out. If swapped - out, bits [31:8], [6:3], [1:0] are under swapper control, so only bit[7] is - left for us to select. If we force bit[7]==0 when swapped out, we could use - the combination bit[7,2]=2'b10 to indicate an empty PTE. Alternatively, if - we force bit[7]==1 when swapped out, we can use all zeroes to indicate - empty. This is convenient, because the page tables get cleared to zero - when they are allocated. - - */ -#define _PTE_EMPTY 0x0 -#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) -#define pte_clear(mm,addr,xp) (set_pte_at(mm, addr, xp, __pte(_PTE_EMPTY))) -#define pte_none(x) (pte_val(x) == _PTE_EMPTY) - -/* - * Some definitions to translate between mem_map, PTEs, and page - * addresses: - */ - -/* - * Given a PTE, return the index of the mem_map[] entry corresponding - * to the page frame the PTE. Get the absolute physical address, make - * a relative physical address and translate it to an index. - */ -#define pte_pagenr(x) (((unsigned long) (pte_val(x)) - \ - __MEMORY_START) >> PAGE_SHIFT) - -/* - * Given a PTE, return the "struct page *". - */ -#define pte_page(x) (mem_map + pte_pagenr(x)) - -/* - * Return number of (down rounded) MB corresponding to x pages. - */ -#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) - - -/* - * The following have defined behavior only work if pte_present() is true. - */ -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } -static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; } -static inline int pte_special(pte_t pte){ return 0; } - -static inline pte_t pte_wrprotect(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_WRITE)); return pte; } -static inline pte_t pte_mkclean(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; } -static inline pte_t pte_mkold(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; } -static inline pte_t pte_mkwrite(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_WRITE)); return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; } -static inline pte_t pte_mkhuge(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; } -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - - -/* - * Conversion functions: convert a page and protection to a page entry. - * - * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) - */ -#define mk_pte(page,pgprot) \ -({ \ - pte_t __pte; \ - \ - set_pte(&__pte, __pte((((page)-mem_map) << PAGE_SHIFT) | \ - __MEMORY_START | pgprot_val((pgprot)))); \ - __pte; \ -}) - -/* - * This takes a (absolute) physical page address that is used - * by the remapping functions - */ -#define mk_pte_phys(physpage, pgprot) \ -({ pte_t __pte; set_pte(&__pte, __pte(physpage | pgprot_val(pgprot))); __pte; }) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; } - -/* Encode and decode a swap entry */ -#define __swp_type(x) (((x).val & 3) + (((x).val >> 1) & 0x3c)) -#define __swp_offset(x) ((x).val >> 8) -#define __swp_entry(type, offset) ((swp_entry_t) { ((offset << 8) + ((type & 0x3c) << 1) + (type & 3)) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -/* Encode and decode a nonlinear file mapping entry */ -#define PTE_FILE_MAX_BITS 29 -#define pte_to_pgoff(pte) (pte_val(pte)) -#define pgoff_to_pte(off) ((pte_t) { (off) | _PAGE_FILE }) - -#endif /* !__ASSEMBLY__ */ - -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) - -#endif /* __ASM_SH_PGTABLE_64_H */ diff --git a/include/asm-sh/pm.h b/include/asm-sh/pm.h deleted file mode 100644 index 56fdbd6b1c94..000000000000 --- a/include/asm-sh/pm.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright 2006 (c) Andriy Skulysh - * - */ -#ifndef __ASM_SH_PM_H -#define __ASM_SH_PM_H - -extern u8 wakeup_start; -extern u8 wakeup_end; - -void pm_enter(void); - -#endif diff --git a/include/asm-sh/poll.h b/include/asm-sh/poll.h deleted file mode 100644 index c98509d3149e..000000000000 --- a/include/asm-sh/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/posix_types.h b/include/asm-sh/posix_types.h deleted file mode 100644 index 4eeb723aee7e..000000000000 --- a/include/asm-sh/posix_types.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifdef __KERNEL__ -# ifdef CONFIG_SUPERH32 -# include "posix_types_32.h" -# else -# include "posix_types_64.h" -# endif -#else -# ifdef __SH5__ -# include "posix_types_64.h" -# else -# include "posix_types_32.h" -# endif -#endif /* __KERNEL__ */ diff --git a/include/asm-sh/posix_types_32.h b/include/asm-sh/posix_types_32.h deleted file mode 100644 index 0a3d2f54ab27..000000000000 --- a/include/asm-sh/posix_types_32.h +++ /dev/null @@ -1,122 +0,0 @@ -#ifndef __ASM_SH_POSIX_TYPES_H -#define __ASM_SH_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) - int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ -} __kernel_fsid_t; - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); -} - - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *__p) -{ - unsigned long *__tmp = __p->fds_bits; - int __i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - __tmp[ 8] = 0; __tmp[ 9] = 0; - __tmp[10] = 0; __tmp[11] = 0; - __tmp[12] = 0; __tmp[13] = 0; - __tmp[14] = 0; __tmp[15] = 0; - return; - - case 8: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - return; - - case 4: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - return; - } - } - __i = __FDSET_LONGS; - while (__i) { - __i--; - *__tmp = 0; - __tmp++; - } -} - -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ - -#endif /* __ASM_SH_POSIX_TYPES_H */ diff --git a/include/asm-sh/posix_types_64.h b/include/asm-sh/posix_types_64.h deleted file mode 100644 index 0620317a6f0f..000000000000 --- a/include/asm-sh/posix_types_64.h +++ /dev/null @@ -1,131 +0,0 @@ -#ifndef __ASM_SH64_POSIX_TYPES_H -#define __ASM_SH64_POSIX_TYPES_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/posix_types.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef long unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) - int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ -} __kernel_fsid_t; - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); -} - - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *__p) -{ - unsigned long *__tmp = __p->fds_bits; - int __i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - __tmp[ 8] = 0; __tmp[ 9] = 0; - __tmp[10] = 0; __tmp[11] = 0; - __tmp[12] = 0; __tmp[13] = 0; - __tmp[14] = 0; __tmp[15] = 0; - return; - - case 8: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - return; - - case 4: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - return; - } - } - __i = __FDSET_LONGS; - while (__i) { - __i--; - *__tmp = 0; - __tmp++; - } -} - -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ - -#endif /* __ASM_SH64_POSIX_TYPES_H */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h deleted file mode 100644 index 15d9f92ca383..000000000000 --- a/include/asm-sh/processor.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef __ASM_SH_PROCESSOR_H -#define __ASM_SH_PROCESSOR_H - -#include -#include - -#ifndef __ASSEMBLY__ -/* - * CPU type and hardware bug flags. Kept separately for each CPU. - * - * Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry - * in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c - * for parsing the subtype in get_cpu_subtype(). - */ -enum cpu_type { - /* SH-2 types */ - CPU_SH7619, - - /* SH-2A types */ - CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG, - - /* SH-3 types */ - CPU_SH7705, CPU_SH7706, CPU_SH7707, - CPU_SH7708, CPU_SH7708S, CPU_SH7708R, - CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712, - CPU_SH7720, CPU_SH7721, CPU_SH7729, - - /* SH-4 types */ - CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R, - CPU_SH7760, CPU_SH4_202, CPU_SH4_501, - - /* SH-4A types */ - CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, - CPU_SH7723, CPU_SHX3, - - /* SH4AL-DSP types */ - CPU_SH7343, CPU_SH7722, CPU_SH7366, - - /* SH-5 types */ - CPU_SH5_101, CPU_SH5_103, - - /* Unknown subtype */ - CPU_SH_NONE -}; - -/* Forward decl */ -struct sh_cpuinfo; - -/* arch/sh/kernel/setup.c */ -const char *get_cpu_subtype(struct sh_cpuinfo *c); - -#ifdef CONFIG_VSYSCALL -int vsyscall_init(void); -#else -#define vsyscall_init() do { } while (0) -#endif - -#endif /* __ASSEMBLY__ */ - -#ifdef CONFIG_SUPERH32 -# include "processor_32.h" -#else -# include "processor_64.h" -#endif - -#endif /* __ASM_SH_PROCESSOR_H */ diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h deleted file mode 100644 index 0dadd75bd93c..000000000000 --- a/include/asm-sh/processor_32.h +++ /dev/null @@ -1,216 +0,0 @@ -/* - * include/asm-sh/processor.h - * - * Copyright (C) 1999, 2000 Niibe Yutaka - * Copyright (C) 2002, 2003 Paul Mundt - */ - -#ifndef __ASM_SH_PROCESSOR_32_H -#define __ASM_SH_PROCESSOR_32_H -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n.align 2\n1:":"=z" (pc)); pc; }) - -/* Core Processor Version Register */ -#define CCN_PVR 0xff000030 -#define CCN_CVR 0xff000040 -#define CCN_PRR 0xff000044 - -struct sh_cpuinfo { - unsigned int type; - int cut_major, cut_minor; - unsigned long loops_per_jiffy; - unsigned long asid_cache; - - struct cache_info icache; /* Primary I-cache */ - struct cache_info dcache; /* Primary D-cache */ - struct cache_info scache; /* Secondary cache */ - - unsigned long flags; -} __attribute__ ((aligned(L1_CACHE_BYTES))); - -extern struct sh_cpuinfo cpu_data[]; -#define boot_cpu_data cpu_data[0] -#define current_cpu_data cpu_data[smp_processor_id()] -#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] - -/* - * User space process size: 2GB. - * - * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff - */ -#define TASK_SIZE 0x7c000000UL - -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) - -/* - * Bit of SR register - * - * FD-bit: - * When it's set, it means the processor doesn't have right to use FPU, - * and it results exception when the floating operation is executed. - * - * IMASK-bit: - * Interrupt level mask - */ -#define SR_DSP 0x00001000 -#define SR_IMASK 0x000000f0 -#define SR_FD 0x00008000 - -/* - * FPU structure and data - */ - -struct sh_fpu_hard_struct { - unsigned long fp_regs[16]; - unsigned long xfp_regs[16]; - unsigned long fpscr; - unsigned long fpul; - - long status; /* software status information */ -}; - -/* Dummy fpu emulator */ -struct sh_fpu_soft_struct { - unsigned long fp_regs[16]; - unsigned long xfp_regs[16]; - unsigned long fpscr; - unsigned long fpul; - - unsigned char lookahead; - unsigned long entry_pc; -}; - -union sh_fpu_union { - struct sh_fpu_hard_struct hard; - struct sh_fpu_soft_struct soft; -}; - -struct thread_struct { - /* Saved registers when thread is descheduled */ - unsigned long sp; - unsigned long pc; - - /* Hardware debugging registers */ - unsigned long ubc_pc; - - /* floating point info */ - union sh_fpu_union fpu; -}; - -/* Count of active tasks with UBC settings */ -extern int ubc_usercnt; - -#define INIT_THREAD { \ - .sp = sizeof(init_stack) + (long) &init_stack, \ -} - -/* - * Do necessary setup to start up a newly executed thread. - */ -#define start_thread(regs, new_pc, new_sp) \ - set_fs(USER_DS); \ - regs->pr = 0; \ - regs->sr = SR_FD; /* User mode. */ \ - regs->pc = new_pc; \ - regs->regs[15] = new_sp - -/* Forward declaration, a strange C thing */ -struct task_struct; -struct mm_struct; - -/* Free all resources held by a thread. */ -extern void release_thread(struct task_struct *); - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -/* - * create a kernel thread without removing it from tasklists - */ -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* Copy and release all segment info associated with a VM */ -#define copy_segments(p, mm) do { } while(0) -#define release_segments(mm) do { } while(0) - -/* - * FPU lazy state save handling. - */ - -static __inline__ void disable_fpu(void) -{ - unsigned long __dummy; - - /* Set FD flag in SR */ - __asm__ __volatile__("stc sr, %0\n\t" - "or %1, %0\n\t" - "ldc %0, sr" - : "=&r" (__dummy) - : "r" (SR_FD)); -} - -static __inline__ void enable_fpu(void) -{ - unsigned long __dummy; - - /* Clear out FD flag in SR */ - __asm__ __volatile__("stc sr, %0\n\t" - "and %1, %0\n\t" - "ldc %0, sr" - : "=&r" (__dummy) - : "r" (~SR_FD)); -} - -/* Double presision, NANS as NANS, rounding to nearest, no exceptions */ -#define FPSCR_INIT 0x00080000 - -#define FPSCR_CAUSE_MASK 0x0001f000 /* Cause bits */ -#define FPSCR_FLAG_MASK 0x0000007c /* Flag bits */ - -/* - * Return saved PC of a blocked thread. - */ -#define thread_saved_pc(tsk) (tsk->thread.pc) - -void show_trace(struct task_struct *tsk, unsigned long *sp, - struct pt_regs *regs); -extern unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc) -#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[15]) - -#define cpu_sleep() __asm__ __volatile__ ("sleep" : : : "memory") -#define cpu_relax() barrier() - -#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \ - defined(CONFIG_CPU_SH4) -#define PREFETCH_STRIDE L1_CACHE_BYTES -#define ARCH_HAS_PREFETCH -#define ARCH_HAS_PREFETCHW -static inline void prefetch(void *x) -{ - __asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory"); -} - -#define prefetchw(x) prefetch(x) -#endif - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_PROCESSOR_32_H */ diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h deleted file mode 100644 index fc7fc685ba27..000000000000 --- a/include/asm-sh/processor_64.h +++ /dev/null @@ -1,275 +0,0 @@ -#ifndef __ASM_SH_PROCESSOR_64_H -#define __ASM_SH_PROCESSOR_64_H - -/* - * include/asm-sh/processor_64.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * Copyright (C) 2004 Richard Curnow - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASSEMBLY__ - -#include -#include -#include -#include -#include -#include - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ \ -void *pc; \ -unsigned long long __dummy = 0; \ -__asm__("gettr tr0, %1\n\t" \ - "pta 4, tr0\n\t" \ - "gettr tr0, %0\n\t" \ - "ptabs %1, tr0\n\t" \ - :"=r" (pc), "=r" (__dummy) \ - : "1" (__dummy)); \ -pc; }) - -/* - * TLB information structure - * - * Defined for both I and D tlb, per-processor. - */ -struct tlb_info { - unsigned long long next; - unsigned long long first; - unsigned long long last; - - unsigned int entries; - unsigned int step; - - unsigned long flags; -}; - -struct sh_cpuinfo { - enum cpu_type type; - unsigned long loops_per_jiffy; - unsigned long asid_cache; - - unsigned int cpu_clock, master_clock, bus_clock, module_clock; - - /* Cache info */ - struct cache_info icache; - struct cache_info dcache; - struct cache_info scache; - - /* TLB info */ - struct tlb_info itlb; - struct tlb_info dtlb; - - unsigned long flags; -}; - -extern struct sh_cpuinfo cpu_data[]; -#define boot_cpu_data cpu_data[0] -#define current_cpu_data cpu_data[smp_processor_id()] -#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] - -#endif - -/* - * User space process size: 2GB - 4k. - */ -#define TASK_SIZE 0x7ffff000UL - -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) - -/* - * Bit of SR register - * - * FD-bit: - * When it's set, it means the processor doesn't have right to use FPU, - * and it results exception when the floating operation is executed. - * - * IMASK-bit: - * Interrupt level mask - * - * STEP-bit: - * Single step bit - * - */ -#if defined(CONFIG_SH64_SR_WATCH) -#define SR_MMU 0x84000000 -#else -#define SR_MMU 0x80000000 -#endif - -#define SR_IMASK 0x000000f0 -#define SR_FD 0x00008000 -#define SR_SSTEP 0x08000000 - -#ifndef __ASSEMBLY__ - -/* - * FPU structure and data : require 8-byte alignment as we need to access it - with fld.p, fst.p - */ - -struct sh_fpu_hard_struct { - unsigned long fp_regs[64]; - unsigned int fpscr; - /* long status; * software status information */ -}; - -#if 0 -/* Dummy fpu emulator */ -struct sh_fpu_soft_struct { - unsigned long long fp_regs[32]; - unsigned int fpscr; - unsigned char lookahead; - unsigned long entry_pc; -}; -#endif - -union sh_fpu_union { - struct sh_fpu_hard_struct hard; - /* 'hard' itself only produces 32 bit alignment, yet we need - to access it using 64 bit load/store as well. */ - unsigned long long alignment_dummy; -}; - -struct thread_struct { - unsigned long sp; - unsigned long pc; - /* This stores the address of the pt_regs built during a context - switch, or of the register save area built for a kernel mode - exception. It is used for backtracing the stack of a sleeping task - or one that traps in kernel mode. */ - struct pt_regs *kregs; - /* This stores the address of the pt_regs constructed on entry from - user mode. It is a fixed value over the lifetime of a process, or - NULL for a kernel thread. */ - struct pt_regs *uregs; - - unsigned long trap_no, error_code; - unsigned long address; - /* Hardware debugging registers may come here */ - - /* floating point info */ - union sh_fpu_union fpu; -}; - -#define INIT_MMAP \ -{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL } - -extern struct pt_regs fake_swapper_regs; - -#define INIT_THREAD { \ - .sp = sizeof(init_stack) + \ - (long) &init_stack, \ - .pc = 0, \ - .kregs = &fake_swapper_regs, \ - .uregs = NULL, \ - .trap_no = 0, \ - .error_code = 0, \ - .address = 0, \ - .fpu = { { { 0, } }, } \ -} - -/* - * Do necessary setup to start up a newly executed thread. - */ -#define SR_USER (SR_MMU | SR_FD) - -#define start_thread(regs, new_pc, new_sp) \ - set_fs(USER_DS); \ - regs->sr = SR_USER; /* User mode. */ \ - regs->pc = new_pc - 4; /* Compensate syscall exit */ \ - regs->pc |= 1; /* Set SHmedia ! */ \ - regs->regs[18] = 0; \ - regs->regs[15] = new_sp - -/* Forward declaration, a strange C thing */ -struct task_struct; -struct mm_struct; - -/* Free all resources held by a thread. */ -extern void release_thread(struct task_struct *); -/* - * create a kernel thread without removing it from tasklists - */ -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - - -/* Copy and release all segment info associated with a VM */ -#define copy_segments(p, mm) do { } while (0) -#define release_segments(mm) do { } while (0) -#define forget_segments() do { } while (0) -#define prepare_to_copy(tsk) do { } while (0) -/* - * FPU lazy state save handling. - */ - -static inline void disable_fpu(void) -{ - unsigned long long __dummy; - - /* Set FD flag in SR */ - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "or %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy) - : "r" (SR_FD)); -} - -static inline void enable_fpu(void) -{ - unsigned long long __dummy; - - /* Clear out FD flag in SR */ - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "and %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy) - : "r" (~SR_FD)); -} - -/* Round to nearest, no exceptions on inexact, overflow, underflow, - zero-divide, invalid. Configure option for whether to flush denorms to - zero, or except if a denorm is encountered. */ -#if defined(CONFIG_SH64_FPU_DENORM_FLUSH) -#define FPSCR_INIT 0x00040000 -#else -#define FPSCR_INIT 0x00000000 -#endif - -#ifdef CONFIG_SH_FPU -/* Initialise the FP state of a task */ -void fpinit(struct sh_fpu_hard_struct *fpregs); -#else -#define fpinit(fpregs) do { } while (0) -#endif - -extern struct task_struct *last_task_used_math; - -/* - * Return saved PC of a blocked thread. - */ -#define thread_saved_pc(tsk) (tsk->thread.pc) - -extern unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) ((tsk)->thread.pc) -#define KSTK_ESP(tsk) ((tsk)->thread.sp) - -#define cpu_relax() barrier() - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH_PROCESSOR_64_H */ diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h deleted file mode 100644 index 643ab5a7cf3b..000000000000 --- a/include/asm-sh/ptrace.h +++ /dev/null @@ -1,130 +0,0 @@ -#ifndef __ASM_SH_PTRACE_H -#define __ASM_SH_PTRACE_H - -/* - * Copyright (C) 1999, 2000 Niibe Yutaka - * - */ -#if defined(__SH5__) -struct pt_regs { - unsigned long long pc; - unsigned long long sr; - unsigned long long syscall_nr; - unsigned long long regs[63]; - unsigned long long tregs[8]; - unsigned long long pad[2]; -}; -#else -/* - * GCC defines register number like this: - * ----------------------------- - * 0 - 15 are integer registers - * 17 - 22 are control/special registers - * 24 - 39 fp registers - * 40 - 47 xd registers - * 48 - fpscr register - * ----------------------------- - * - * We follows above, except: - * 16 --- program counter (PC) - * 22 --- syscall # - * 23 --- floating point communication register - */ -#define REG_REG0 0 -#define REG_REG15 15 - -#define REG_PC 16 - -#define REG_PR 17 -#define REG_SR 18 -#define REG_GBR 19 -#define REG_MACH 20 -#define REG_MACL 21 - -#define REG_SYSCALL 22 - -#define REG_FPREG0 23 -#define REG_FPREG15 38 -#define REG_XFREG0 39 -#define REG_XFREG15 54 - -#define REG_FPSCR 55 -#define REG_FPUL 56 - -/* - * This struct defines the way the registers are stored on the - * kernel stack during a system call or other kernel entry. - */ -struct pt_regs { - unsigned long regs[16]; - unsigned long pc; - unsigned long pr; - unsigned long sr; - unsigned long gbr; - unsigned long mach; - unsigned long macl; - long tra; -}; - -/* - * This struct defines the way the DSP registers are stored on the - * kernel stack during a system call or other kernel entry. - */ -struct pt_dspregs { - unsigned long a1; - unsigned long a0g; - unsigned long a1g; - unsigned long m0; - unsigned long m1; - unsigned long a0; - unsigned long x0; - unsigned long x1; - unsigned long y0; - unsigned long y1; - unsigned long dsr; - unsigned long rs; - unsigned long re; - unsigned long mod; -}; - -#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ - -#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ -#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ - -#define PTRACE_GETDSPREGS 55 -#define PTRACE_SETDSPREGS 56 -#endif - -#ifdef __KERNEL__ -#include - -#define user_mode(regs) (((regs)->sr & 0x40000000)==0) -#define instruction_pointer(regs) ((unsigned long)(regs)->pc) - -extern void show_regs(struct pt_regs *); - -#ifdef CONFIG_SH_DSP -#define task_pt_regs(task) \ - ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ - - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1) -#else -#define task_pt_regs(task) \ - ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ - - sizeof(unsigned long)) - 1) -#endif - -static inline unsigned long profile_pc(struct pt_regs *regs) -{ - unsigned long pc = instruction_pointer(regs); - -#ifdef P2SEG - if (pc >= P2SEG && pc < P3SEG) - pc -= 0x20000000; -#endif - - return pc; -} -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_PTRACE_H */ diff --git a/include/asm-sh/push-switch.h b/include/asm-sh/push-switch.h deleted file mode 100644 index 4903f9e52dd8..000000000000 --- a/include/asm-sh/push-switch.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef __ASM_SH_PUSH_SWITCH_H -#define __ASM_SH_PUSH_SWITCH_H - -#include -#include -#include -#include - -struct push_switch { - /* switch state */ - unsigned int state:1; - /* debounce timer */ - struct timer_list debounce; - /* workqueue */ - struct work_struct work; - /* platform device, for workqueue handler */ - struct platform_device *pdev; -}; - -struct push_switch_platform_info { - /* IRQ handler */ - irqreturn_t (*irq_handler)(int irq, void *data); - /* Special IRQ flags */ - unsigned int irq_flags; - /* Bit location of switch */ - unsigned int bit; - /* Symbolic switch name */ - const char *name; -}; - -#endif /* __ASM_SH_PUSH_SWITCH_H */ diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h deleted file mode 100644 index 306f7359f7d4..000000000000 --- a/include/asm-sh/r7780rp.h +++ /dev/null @@ -1,198 +0,0 @@ -#ifndef __ASM_SH_RENESAS_R7780RP_H -#define __ASM_SH_RENESAS_R7780RP_H - -/* Box specific addresses. */ -#if defined(CONFIG_SH_R7780MP) -#define PA_BCR 0xa4000000 /* FPGA */ -#define PA_SDPOW (-1) - -#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ -#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ -#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */ -#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */ -#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */ -#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */ -#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */ -#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */ -#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */ -#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */ -#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */ -#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */ -#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */ -#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */ -#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */ -#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ -#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ -#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ -#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ -#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ -#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ -#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */ -#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ -#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ -#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ -#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */ -#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */ -#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */ -#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */ -#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */ -#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */ -#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */ -#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */ -#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */ -#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */ -#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */ -#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */ -#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */ -#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */ -#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */ -#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */ -#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */ -#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */ -#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */ -#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */ -#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */ -#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */ -#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */ -#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */ -#define PA_SMCR (PA_BCR+0x0600) /* 2-wire Serial control */ -#define PA_SMSMADR (PA_BCR+0x0602) /* 2-wire Serial Slave control */ -#define PA_SMMR (PA_BCR+0x0604) /* 2-wire Serial Mode control */ -#define PA_SMSADR1 (PA_BCR+0x0606) /* 2-wire Serial Address1 control */ -#define PA_SMTRDR1 (PA_BCR+0x0646) /* 2-wire Serial Data1 control */ -#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */ -#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */ -#define PA_PMR (PA_BCR+0x0900) /* */ - -#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ -#define IVDR_CK_ON 8 /* iVDR Clock ON */ - -#elif defined(CONFIG_SH_R7780RP) -#define PA_POFF (-1) - -#define PA_BCR 0xa5000000 /* FPGA */ -#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ -#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ -#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */ -#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */ -#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */ -#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */ -#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */ -#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */ -#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */ -#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */ -#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */ -#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */ -#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */ -#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */ -#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */ -#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ -#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ -#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ -#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ -#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ -#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ -#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */ -#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */ -#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */ -#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ -#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ -#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ -#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */ -#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */ -#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */ -#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */ -#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */ -#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */ -#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */ -#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */ -#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */ -#define PA_SMCR (PA_BCR+0x0500) /* 2-wire Serial control */ -#define PA_SMSMADR (PA_BCR+0x0502) /* 2-wire Serial Slave control */ -#define PA_SMMR (PA_BCR+0x0504) /* 2-wire Serial Mode control */ -#define PA_SMSADR1 (PA_BCR+0x0506) /* 2-wire Serial Address1 control */ -#define PA_SMTRDR1 (PA_BCR+0x0546) /* 2-wire Serial Data1 control */ -#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */ - -#define PA_AX88796L 0xa5800400 /* AX88796L Area */ -#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */ -#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ -#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ - -#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ - -#define IVDR_CK_ON 8 /* iVDR Clock ON */ - -#elif defined(CONFIG_SH_R7785RP) -#define PA_BCR 0xa4000000 /* FPGA */ -#define PA_SDPOW (-1) - -#define PA_PCISCR (PA_BCR+0x0000) -#define PA_IRLPRA (PA_BCR+0x0002) -#define PA_IRLPRB (PA_BCR+0x0004) -#define PA_IRLPRC (PA_BCR+0x0006) -#define PA_IRLPRD (PA_BCR+0x0008) -#define IRLCNTR1 (PA_BCR+0x0010) -#define PA_IRLPRE (PA_BCR+0x000a) -#define PA_IRLPRF (PA_BCR+0x000c) -#define PA_EXIRLCR (PA_BCR+0x000e) -#define PA_IRLMCR1 (PA_BCR+0x0010) -#define PA_IRLMCR2 (PA_BCR+0x0012) -#define PA_IRLSSR1 (PA_BCR+0x0014) -#define PA_IRLSSR2 (PA_BCR+0x0016) -#define PA_CFTCR (PA_BCR+0x0100) -#define PA_CFPCR (PA_BCR+0x0102) -#define PA_PCICR (PA_BCR+0x0110) -#define PA_IVDRCTL (PA_BCR+0x0112) -#define PA_IVDRSR (PA_BCR+0x0114) -#define PA_PDRSTCR (PA_BCR+0x0116) -#define PA_POFF (PA_BCR+0x0120) -#define PA_LCDCR (PA_BCR+0x0130) -#define PA_TPCR (PA_BCR+0x0140) -#define PA_TPCKCR (PA_BCR+0x0142) -#define PA_TPRSTR (PA_BCR+0x0144) -#define PA_TPXPDR (PA_BCR+0x0146) -#define PA_TPYPDR (PA_BCR+0x0148) -#define PA_GPIOPFR (PA_BCR+0x0150) -#define PA_GPIODR (PA_BCR+0x0152) -#define PA_OBLED (PA_BCR+0x0154) -#define PA_SWSR (PA_BCR+0x0156) -#define PA_VERREG (PA_BCR+0x0158) -#define PA_SMCR (PA_BCR+0x0200) -#define PA_SMSMADR (PA_BCR+0x0202) -#define PA_SMMR (PA_BCR+0x0204) -#define PA_SMSADR1 (PA_BCR+0x0206) -#define PA_SMSADR32 (PA_BCR+0x0244) -#define PA_SMTRDR1 (PA_BCR+0x0246) -#define PA_SMTRDR16 (PA_BCR+0x0264) -#define PA_CU3MDR (PA_BCR+0x0300) -#define PA_CU5MDR (PA_BCR+0x0302) -#define PA_MMSR (PA_BCR+0x0400) - -#define IVDR_CK_ON 4 /* iVDR Clock ON */ -#endif - -#define HL_FPGA_IRQ_BASE 200 -#define HL_NR_IRL 15 - -#define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0) -#define IRQ_CF (HL_FPGA_IRQ_BASE + 1) -#define IRQ_PSW (HL_FPGA_IRQ_BASE + 2) -#define IRQ_EXT0 (HL_FPGA_IRQ_BASE + 3) -#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 4) -#define IRQ_EXT2 (HL_FPGA_IRQ_BASE + 5) -#define IRQ_EXT3 (HL_FPGA_IRQ_BASE + 6) -#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 7) -#define IRQ_EXT5 (HL_FPGA_IRQ_BASE + 8) -#define IRQ_EXT6 (HL_FPGA_IRQ_BASE + 9) -#define IRQ_EXT7 (HL_FPGA_IRQ_BASE + 10) -#define IRQ_SMBUS (HL_FPGA_IRQ_BASE + 11) -#define IRQ_TP (HL_FPGA_IRQ_BASE + 12) -#define IRQ_RTC (HL_FPGA_IRQ_BASE + 13) -#define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14) -#define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15) -#define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16) - -unsigned char *highlander_plat_irq_setup(void); - -#endif /* __ASM_SH_RENESAS_R7780RP */ diff --git a/include/asm-sh/resource.h b/include/asm-sh/resource.h deleted file mode 100644 index 9c2499a86ec0..000000000000 --- a/include/asm-sh/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_RESOURCE_H -#define __ASM_SH_RESOURCE_H - -#include - -#endif /* __ASM_SH_RESOURCE_H */ diff --git a/include/asm-sh/rtc.h b/include/asm-sh/rtc.h deleted file mode 100644 index ec45ba8e11d9..000000000000 --- a/include/asm-sh/rtc.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _ASM_RTC_H -#define _ASM_RTC_H - -extern void (*board_time_init)(void); -extern void (*rtc_sh_get_time)(struct timespec *); -extern int (*rtc_sh_set_time)(const time_t); - -#define RTC_CAP_4_DIGIT_YEAR (1 << 0) - -struct sh_rtc_platform_info { - unsigned long capabilities; -}; - -#include - -#endif /* _ASM_RTC_H */ diff --git a/include/asm-sh/rts7751r2d.h b/include/asm-sh/rts7751r2d.h deleted file mode 100644 index 0a800157b826..000000000000 --- a/include/asm-sh/rts7751r2d.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef __ASM_SH_RENESAS_RTS7751R2D_H -#define __ASM_SH_RENESAS_RTS7751R2D_H - -/* - * linux/include/asm-sh/renesas_rts7751r2d.h - * - * Copyright (C) 2000 Atom Create Engineering Co., Ltd. - * - * Renesas Technology Sales RTS7751R2D support - */ - -/* Board specific addresses. */ - -#define PA_BCR 0xa4000000 /* FPGA */ -#define PA_IRLMON 0xa4000002 /* Interrupt Status control */ -#define PA_CFCTL 0xa4000004 /* CF Timing control */ -#define PA_CFPOW 0xa4000006 /* CF Power control */ -#define PA_DISPCTL 0xa4000008 /* Display Timing control */ -#define PA_SDMPOW 0xa400000a /* SD Power control */ -#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */ -#define PA_PCICD 0xa400000e /* PCI Extention detect control */ -#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */ - -#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */ -#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */ -#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */ -#define PA_R2D1_EXTRST 0xa4000028 /* Extention Reset control */ -#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */ - -#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */ -#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */ -#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extention Reset control */ -#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */ -#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */ - -#define PA_POWOFF 0xa4000030 /* Board Power OFF control */ -#define PA_VERREG 0xa4000032 /* FPGA Version Register */ -#define PA_INPORT 0xa4000034 /* KEY Input Port control */ -#define PA_OUTPORT 0xa4000036 /* LED control */ -#define PA_BVERREG 0xa4000038 /* Board Revision Register */ - -#define PA_AX88796L 0xaa000400 /* AX88796L Area */ -#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */ -#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ -#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ - -#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ - -#define R2D_FPGA_IRQ_BASE 100 - -#define IRQ_VOYAGER (R2D_FPGA_IRQ_BASE + 0) -#define IRQ_EXT (R2D_FPGA_IRQ_BASE + 1) -#define IRQ_TP (R2D_FPGA_IRQ_BASE + 2) -#define IRQ_RTC_T (R2D_FPGA_IRQ_BASE + 3) -#define IRQ_RTC_A (R2D_FPGA_IRQ_BASE + 4) -#define IRQ_SDCARD (R2D_FPGA_IRQ_BASE + 5) -#define IRQ_CF_CD (R2D_FPGA_IRQ_BASE + 6) -#define IRQ_CF_IDE (R2D_FPGA_IRQ_BASE + 7) -#define IRQ_AX88796 (R2D_FPGA_IRQ_BASE + 8) -#define IRQ_KEY (R2D_FPGA_IRQ_BASE + 9) -#define IRQ_PCI_INTA (R2D_FPGA_IRQ_BASE + 10) -#define IRQ_PCI_INTB (R2D_FPGA_IRQ_BASE + 11) -#define IRQ_PCI_INTC (R2D_FPGA_IRQ_BASE + 12) -#define IRQ_PCI_INTD (R2D_FPGA_IRQ_BASE + 13) - -/* arch/sh/boards/renesas/rts7751r2d/irq.c */ -void init_rts7751r2d_IRQ(void); -int rts7751r2d_irq_demux(int); - -#endif /* __ASM_SH_RENESAS_RTS7751R2D */ diff --git a/include/asm-sh/rwsem.h b/include/asm-sh/rwsem.h deleted file mode 100644 index 1987f3ea7f1b..000000000000 --- a/include/asm-sh/rwsem.h +++ /dev/null @@ -1,188 +0,0 @@ -/* - * include/asm-sh/rwsem.h: R/W semaphores for SH using the stuff - * in lib/rwsem.c. - */ - -#ifndef _ASM_SH_RWSEM_H -#define _ASM_SH_RWSEM_H - -#ifndef _LINUX_RWSEM_H -#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead" -#endif - -#ifdef __KERNEL__ -#include -#include -#include -#include - -/* - * the semaphore definition - */ -struct rw_semaphore { - long count; -#define RWSEM_UNLOCKED_VALUE 0x00000000 -#define RWSEM_ACTIVE_BIAS 0x00000001 -#define RWSEM_ACTIVE_MASK 0x0000ffff -#define RWSEM_WAITING_BIAS (-0x00010000) -#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS -#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) - spinlock_t wait_lock; - struct list_head wait_list; -#ifdef CONFIG_DEBUG_LOCK_ALLOC - struct lockdep_map dep_map; -#endif -}; - -#ifdef CONFIG_DEBUG_LOCK_ALLOC -# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } -#else -# define __RWSEM_DEP_MAP_INIT(lockname) -#endif - -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ - LIST_HEAD_INIT((name).wait_list) \ - __RWSEM_DEP_MAP_INIT(name) } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); - -extern void __init_rwsem(struct rw_semaphore *sem, const char *name, - struct lock_class_key *key); - -#define init_rwsem(sem) \ -do { \ - static struct lock_class_key __key; \ - \ - __init_rwsem((sem), #sem, &__key); \ -} while (0) - -static inline void init_rwsem(struct rw_semaphore *sem) -{ - sem->count = RWSEM_UNLOCKED_VALUE; - spin_lock_init(&sem->wait_lock); - INIT_LIST_HEAD(&sem->wait_list); -} - -/* - * lock for reading - */ -static inline void __down_read(struct rw_semaphore *sem) -{ - if (atomic_inc_return((atomic_t *)(&sem->count)) > 0) - smp_wmb(); - else - rwsem_down_read_failed(sem); -} - -static inline int __down_read_trylock(struct rw_semaphore *sem) -{ - int tmp; - - while ((tmp = sem->count) >= 0) { - if (tmp == cmpxchg(&sem->count, tmp, - tmp + RWSEM_ACTIVE_READ_BIAS)) { - smp_wmb(); - return 1; - } - } - return 0; -} - -/* - * lock for writing - */ -static inline void __down_write(struct rw_semaphore *sem) -{ - int tmp; - - tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS, - (atomic_t *)(&sem->count)); - if (tmp == RWSEM_ACTIVE_WRITE_BIAS) - smp_wmb(); - else - rwsem_down_write_failed(sem); -} - -static inline int __down_write_trylock(struct rw_semaphore *sem) -{ - int tmp; - - tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE, - RWSEM_ACTIVE_WRITE_BIAS); - smp_wmb(); - return tmp == RWSEM_UNLOCKED_VALUE; -} - -/* - * unlock after reading - */ -static inline void __up_read(struct rw_semaphore *sem) -{ - int tmp; - - smp_wmb(); - tmp = atomic_dec_return((atomic_t *)(&sem->count)); - if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0) - rwsem_wake(sem); -} - -/* - * unlock after writing - */ -static inline void __up_write(struct rw_semaphore *sem) -{ - smp_wmb(); - if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS, - (atomic_t *)(&sem->count)) < 0) - rwsem_wake(sem); -} - -/* - * implement atomic add functionality - */ -static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) -{ - atomic_add(delta, (atomic_t *)(&sem->count)); -} - -/* - * downgrade write lock to read lock - */ -static inline void __downgrade_write(struct rw_semaphore *sem) -{ - int tmp; - - smp_wmb(); - tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count)); - if (tmp < 0) - rwsem_downgrade_wake(sem); -} - -static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) -{ - __down_write(sem); -} - -/* - * implement exchange and add functionality - */ -static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) -{ - smp_mb(); - return atomic_add_return(delta, (atomic_t *)(&sem->count)); -} - -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_SH_RWSEM_H */ diff --git a/include/asm-sh/scatterlist.h b/include/asm-sh/scatterlist.h deleted file mode 100644 index 2084d0373693..000000000000 --- a/include/asm-sh/scatterlist.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __ASM_SH_SCATTERLIST_H -#define __ASM_SH_SCATTERLIST_H - -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset;/* for highmem, page offset */ - dma_addr_t dma_address; - unsigned int length; -}; - -#define ISA_DMA_THRESHOLD PHYS_ADDR_MASK - -/* These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#endif /* !(__ASM_SH_SCATTERLIST_H) */ diff --git a/include/asm-sh/sdk7780.h b/include/asm-sh/sdk7780.h deleted file mode 100644 index 697dc865f21b..000000000000 --- a/include/asm-sh/sdk7780.h +++ /dev/null @@ -1,81 +0,0 @@ -#ifndef __ASM_SH_RENESAS_SDK7780_H -#define __ASM_SH_RENESAS_SDK7780_H - -/* - * linux/include/asm-sh/sdk7780.h - * - * Renesas Solutions SH7780 SDK Support - * Copyright (C) 2008 Nicholas Beck - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include - -/* Box specific addresses. */ -#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ -#define PA_ROM 0xa0000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_FROM 0xa0800000 /* Flash-ROM */ -#define PA_FROM_SIZE 0x00400000 /* Flash-ROM size 4M byte */ -#define PA_EXT1 0xa4000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */ -#define PA_SDRAM_SIZE 0x08000000 - -#define PA_EXT4 0xb0000000 -#define PA_EXT4_SIZE 0x04000000 -#define PA_EXT_USER PA_EXT4 /* User Expansion Space */ - -#define PA_PERIPHERAL PA_AREA5_IO - -/* SRAM/Reserved */ -#define PA_RESERVED (PA_PERIPHERAL + 0) -/* FPGA base address */ -#define PA_FPGA (PA_PERIPHERAL + 0x01000000) -/* SMC LAN91C111 */ -#define PA_LAN (PA_PERIPHERAL + 0x01800000) - - -#define FPGA_SRSTR (PA_FPGA + 0x000) /* System reset */ -#define FPGA_IRQ0SR (PA_FPGA + 0x010) /* IRQ0 status */ -#define FPGA_IRQ0MR (PA_FPGA + 0x020) /* IRQ0 mask */ -#define FPGA_BDMR (PA_FPGA + 0x030) /* Board operating mode */ -#define FPGA_INTT0PRTR (PA_FPGA + 0x040) /* Interrupt test mode0 port */ -#define FPGA_INTT0SELR (PA_FPGA + 0x050) /* Int. test mode0 select */ -#define FPGA_INTT1POLR (PA_FPGA + 0x060) /* Int. test mode0 polarity */ -#define FPGA_NMIR (PA_FPGA + 0x070) /* NMI source */ -#define FPGA_NMIMR (PA_FPGA + 0x080) /* NMI mask */ -#define FPGA_IRQR (PA_FPGA + 0x090) /* IRQX source */ -#define FPGA_IRQMR (PA_FPGA + 0x0A0) /* IRQX mask */ -#define FPGA_SLEDR (PA_FPGA + 0x0B0) /* LED control */ -#define PA_LED FPGA_SLEDR -#define FPGA_MAPSWR (PA_FPGA + 0x0C0) /* Map switch */ -#define FPGA_FPVERR (PA_FPGA + 0x0D0) /* FPGA version */ -#define FPGA_FPDATER (PA_FPGA + 0x0E0) /* FPGA date */ -#define FPGA_RSE (PA_FPGA + 0x100) /* Reset source */ -#define FPGA_EASR (PA_FPGA + 0x110) /* External area select */ -#define FPGA_SPER (PA_FPGA + 0x120) /* Serial port enable */ -#define FPGA_IMSR (PA_FPGA + 0x130) /* Interrupt mode select */ -#define FPGA_PCIMR (PA_FPGA + 0x140) /* PCI Mode */ -#define FPGA_DIPSWMR (PA_FPGA + 0x150) /* DIPSW monitor */ -#define FPGA_FPODR (PA_FPGA + 0x160) /* Output port data */ -#define FPGA_ATAESR (PA_FPGA + 0x170) /* ATA extended bus status */ -#define FPGA_IRQPOLR (PA_FPGA + 0x180) /* IRQx polarity */ - - -#define SDK7780_NR_IRL 15 -/* IDE/ATA interrupt */ -#define IRQ_CFCARD 14 -/* SMC interrupt */ -#define IRQ_ETHERNET 6 - - -/* arch/sh/boards/renesas/sdk7780/irq.c */ -void init_sdk7780_IRQ(void); - -#define __IO_PREFIX sdk7780 -#include - -#endif /* __ASM_SH_RENESAS_SDK7780_H */ diff --git a/include/asm-sh/se.h b/include/asm-sh/se.h deleted file mode 100644 index eb23000e1bbe..000000000000 --- a/include/asm-sh/se.h +++ /dev/null @@ -1,99 +0,0 @@ -#ifndef __ASM_SH_HITACHI_SE_H -#define __ASM_SH_HITACHI_SE_H - -/* - * linux/include/asm-sh/hitachi_se.h - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SolutionEngine support - */ - -/* Box specific addresses. */ - -#define PA_ROM 0x00000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_FROM 0x01000000 /* EPROM */ -#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_EXT1 0x04000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_EXT2 0x08000000 -#define PA_EXT2_SIZE 0x04000000 -#define PA_SDRAM 0x0c000000 -#define PA_SDRAM_SIZE 0x04000000 - -#define PA_EXT4 0x12000000 -#define PA_EXT4_SIZE 0x02000000 -#define PA_EXT5 0x14000000 -#define PA_EXT5_SIZE 0x04000000 -#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ - -#define PA_83902 0xb0000000 /* DP83902A */ -#define PA_83902_IF 0xb0040000 /* DP83902A remote io port */ -#define PA_83902_RST 0xb0080000 /* DP83902A reset port */ - -#define PA_SUPERIO 0xb0400000 /* SMC37C935A super io chip */ -#define PA_DIPSW0 0xb0800000 /* Dip switch 5,6 */ -#define PA_DIPSW1 0xb0800002 /* Dip switch 7,8 */ -#define PA_LED 0xb0c00000 /* LED */ -#if defined(CONFIG_CPU_SUBTYPE_SH7705) -#define PA_BCR 0xb0e00000 -#else -#define PA_BCR 0xb1400000 /* FPGA */ -#endif - -#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) - -#define BCR_ILCRA (PA_BCR + 0) -#define BCR_ILCRB (PA_BCR + 2) -#define BCR_ILCRC (PA_BCR + 4) -#define BCR_ILCRD (PA_BCR + 6) -#define BCR_ILCRE (PA_BCR + 8) -#define BCR_ILCRF (PA_BCR + 10) -#define BCR_ILCRG (PA_BCR + 12) - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) -#define IRQ_STNIC 12 -#define IRQ_CFCARD 14 -#else -#define IRQ_STNIC 10 -#define IRQ_CFCARD 7 -#endif - -/* SH Ether support (SH7710/SH7712) */ -/* Base address */ -#define SH_ETH0_BASE 0xA7000000 -#define SH_ETH1_BASE 0xA7000400 -/* PHY ID */ -#if defined(CONFIG_CPU_SUBTYPE_SH7710) -# define PHY_ID 0x00 -#elif defined(CONFIG_CPU_SUBTYPE_SH7712) -# define PHY_ID 0x01 -#endif -/* Ether IRQ */ -#define SH_ETH0_IRQ 80 -#define SH_ETH1_IRQ 81 -#define SH_TSU_IRQ 82 - -void init_se_IRQ(void); - -#define __IO_PREFIX se -#include - -#endif /* __ASM_SH_HITACHI_SE_H */ diff --git a/include/asm-sh/se7206.h b/include/asm-sh/se7206.h deleted file mode 100644 index 698eb80389ab..000000000000 --- a/include/asm-sh/se7206.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_SH_SE7206_H -#define __ASM_SH_SE7206_H - -#define PA_SMSC 0x30000000 -#define PA_MRSHPC 0x34000000 -#define PA_LED 0x31400000 - -void init_se7206_IRQ(void); - -#define __IO_PREFIX se7206 -#include - -#endif /* __ASM_SH_SE7206_H */ diff --git a/include/asm-sh/se7343.h b/include/asm-sh/se7343.h deleted file mode 100644 index 98458460e632..000000000000 --- a/include/asm-sh/se7343.h +++ /dev/null @@ -1,149 +0,0 @@ -#ifndef __ASM_SH_HITACHI_SE7343_H -#define __ASM_SH_HITACHI_SE7343_H - -/* - * include/asm-sh/se/se7343.h - * - * Copyright (C) 2003 Takashi Kusuda - * - * SH-Mobile SolutionEngine 7343 support - */ - -/* Box specific addresses. */ - -/* Area 0 */ -#define PA_ROM 0x00000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */ -#define PA_FROM 0x00400000 /* Flash ROM */ -#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */ -#define PA_SRAM 0x00800000 /* SRAM */ -#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */ -/* Area 1 */ -#define PA_EXT1 0x04000000 -#define PA_EXT1_SIZE 0x04000000 -/* Area 2 */ -#define PA_EXT2 0x08000000 -#define PA_EXT2_SIZE 0x04000000 -/* Area 3 */ -#define PA_SDRAM 0x0c000000 -#define PA_SDRAM_SIZE 0x04000000 -/* Area 4 */ -#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */ -#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */ -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) -#define PA_LED 0xb0C00000 /* LED */ -#define LED_SHIFT 0 -#define PA_DIPSW 0xb0900000 /* Dip switch 31 */ -#define PA_CPLD_MODESET 0xb1400004 /* CPLD Mode set register */ -#define PA_CPLD_ST 0xb1400008 /* CPLD Interrupt status register */ -#define PA_CPLD_IMSK 0xb140000a /* CPLD Interrupt mask register */ -/* Area 5 */ -#define PA_EXT5 0x14000000 -#define PA_EXT5_SIZE 0x04000000 -/* Area 6 */ -#define PA_LCD1 0xb8000000 -#define PA_LCD2 0xb8800000 - -#define PORT_PACR 0xA4050100 -#define PORT_PBCR 0xA4050102 -#define PORT_PCCR 0xA4050104 -#define PORT_PDCR 0xA4050106 -#define PORT_PECR 0xA4050108 -#define PORT_PFCR 0xA405010A -#define PORT_PGCR 0xA405010C -#define PORT_PHCR 0xA405010E -#define PORT_PJCR 0xA4050110 -#define PORT_PKCR 0xA4050112 -#define PORT_PLCR 0xA4050114 -#define PORT_PMCR 0xA4050116 -#define PORT_PNCR 0xA4050118 -#define PORT_PQCR 0xA405011A -#define PORT_PRCR 0xA405011C -#define PORT_PSCR 0xA405011E -#define PORT_PTCR 0xA4050140 -#define PORT_PUCR 0xA4050142 -#define PORT_PVCR 0xA4050144 -#define PORT_PWCR 0xA4050146 -#define PORT_PYCR 0xA4050148 -#define PORT_PZCR 0xA405014A - -#define PORT_PSELA 0xA405014C -#define PORT_PSELB 0xA405014E -#define PORT_PSELC 0xA4050150 -#define PORT_PSELD 0xA4050152 -#define PORT_PSELE 0xA4050154 - -#define PORT_HIZCRA 0xA4050156 -#define PORT_HIZCRB 0xA4050158 -#define PORT_HIZCRC 0xA405015C - -#define PORT_DRVCR 0xA4050180 - -#define PORT_PADR 0xA4050120 -#define PORT_PBDR 0xA4050122 -#define PORT_PCDR 0xA4050124 -#define PORT_PDDR 0xA4050126 -#define PORT_PEDR 0xA4050128 -#define PORT_PFDR 0xA405012A -#define PORT_PGDR 0xA405012C -#define PORT_PHDR 0xA405012E -#define PORT_PJDR 0xA4050130 -#define PORT_PKDR 0xA4050132 -#define PORT_PLDR 0xA4050134 -#define PORT_PMDR 0xA4050136 -#define PORT_PNDR 0xA4050138 -#define PORT_PQDR 0xA405013A -#define PORT_PRDR 0xA405013C -#define PORT_PTDR 0xA4050160 -#define PORT_PUDR 0xA4050162 -#define PORT_PVDR 0xA4050164 -#define PORT_PWDR 0xA4050166 -#define PORT_PYDR 0xA4050168 - -#define FPGA_IN 0xb1400000 -#define FPGA_OUT 0xb1400002 - -#define __IO_PREFIX sh7343se -#include - -#define IRQ0_IRQ 32 -#define IRQ1_IRQ 33 -#define IRQ4_IRQ 36 -#define IRQ5_IRQ 37 - -#define SE7343_FPGA_IRQ_MRSHPC0 0 -#define SE7343_FPGA_IRQ_MRSHPC1 1 -#define SE7343_FPGA_IRQ_MRSHPC2 2 -#define SE7343_FPGA_IRQ_MRSHPC3 3 -#define SE7343_FPGA_IRQ_SMC 6 /* EXT_IRQ2 */ -#define SE7343_FPGA_IRQ_USB 8 - -#define SE7343_FPGA_IRQ_NR 11 -#define SE7343_FPGA_IRQ_BASE 120 - -#define MRSHPC_IRQ3 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3) -#define MRSHPC_IRQ2 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2) -#define MRSHPC_IRQ1 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1) -#define MRSHPC_IRQ0 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0) -#define SMC_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC) -#define USB_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB) - -/* arch/sh/boards/se/7343/irq.c */ -void init_7343se_IRQ(void); - -#endif /* __ASM_SH_HITACHI_SE7343_H */ diff --git a/include/asm-sh/se7721.h b/include/asm-sh/se7721.h deleted file mode 100644 index b957f6041193..000000000000 --- a/include/asm-sh/se7721.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright (C) 2008 Renesas Solutions Corp. - * - * Hitachi UL SolutionEngine 7721 Support. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#ifndef __ASM_SH_SE7721_H -#define __ASM_SH_SE7721_H -#include - -/* Box specific addresses. */ -#define SE_AREA0_WIDTH 2 /* Area0: 32bit */ -#define PA_ROM 0xa0000000 /* EPROM */ -#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */ -#define PA_FROM 0xa1000000 /* Flash-ROM */ -#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ -#define PA_EXT1 0xa4000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_SDRAM 0xaC000000 /* SDRAM(Area3) 64MB */ -#define PA_SDRAM_SIZE 0x04000000 - -#define PA_EXT4 0xb0000000 -#define PA_EXT4_SIZE 0x04000000 - -#define PA_PERIPHERAL 0xB8000000 - -#define PA_PCIC PA_PERIPHERAL -#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) -#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) -#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) -#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) - -#define PA_LED 0xB6800000 /* 8bit LED */ -#define PA_FPGA 0xB7000000 /* FPGA base address */ - -#define MRSHPC_IRQ0 10 - -#define FPGA_ILSR1 (PA_FPGA + 0x02) -#define FPGA_ILSR2 (PA_FPGA + 0x03) -#define FPGA_ILSR3 (PA_FPGA + 0x04) -#define FPGA_ILSR4 (PA_FPGA + 0x05) -#define FPGA_ILSR5 (PA_FPGA + 0x06) -#define FPGA_ILSR6 (PA_FPGA + 0x07) -#define FPGA_ILSR7 (PA_FPGA + 0x08) -#define FPGA_ILSR8 (PA_FPGA + 0x09) - -void init_se7721_IRQ(void); - -#define __IO_PREFIX se7721 -#include - -#endif /* __ASM_SH_SE7721_H */ diff --git a/include/asm-sh/se7722.h b/include/asm-sh/se7722.h deleted file mode 100644 index e971d9a82f4a..000000000000 --- a/include/asm-sh/se7722.h +++ /dev/null @@ -1,112 +0,0 @@ -#ifndef __ASM_SH_SE7722_H -#define __ASM_SH_SE7722_H - -/* - * linux/include/asm-sh/se7722.h - * - * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * Hitachi UL SolutionEngine 7722 Support. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#include - -/* Box specific addresses. */ -#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ -#define PA_ROM 0xa0000000 /* EPROM */ -#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */ -#define PA_FROM 0xa1000000 /* Flash-ROM */ -#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ -#define PA_EXT1 0xa4000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_SDRAM 0xaC000000 /* DDR-SDRAM(Area3) 64MB */ -#define PA_SDRAM_SIZE 0x04000000 - -#define PA_EXT4 0xb0000000 -#define PA_EXT4_SIZE 0x04000000 - -#define PA_PERIPHERAL 0xB0000000 - -#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */ -#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) /* MR-SHPC-01 I/O window base */ -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) - -#define PA_LED (PA_PERIPHERAL + 0x00800000) /* 8bit LED */ -#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */ - -#define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */ -/* GPIO */ -#define FPGA_IN 0xb1840000UL -#define FPGA_OUT 0xb1840004UL - -#define PORT_PECR 0xA4050108UL -#define PORT_PJCR 0xA4050110UL -#define PORT_PSELD 0xA4050154UL -#define PORT_PSELB 0xA4050150UL - -#define PORT_PSELC 0xA4050152UL -#define PORT_PKCR 0xA4050112UL -#define PORT_PHCR 0xA405010EUL -#define PORT_PLCR 0xA4050114UL -#define PORT_PMCR 0xA4050116UL -#define PORT_PRCR 0xA405011CUL -#define PORT_PXCR 0xA4050148UL -#define PORT_PSELA 0xA405014EUL -#define PORT_PYCR 0xA405014AUL -#define PORT_PZCR 0xA405014CUL -#define PORT_HIZCRA 0xA4050158UL -#define PORT_HIZCRC 0xA405015CUL - -/* IRQ */ -#define IRQ0_IRQ 32 -#define IRQ1_IRQ 33 - -#define IRQ01_MODE 0xb1800000 -#define IRQ01_STS 0xb1800004 -#define IRQ01_MASK 0xb1800008 - -/* Bits in IRQ01_* registers */ - -#define SE7722_FPGA_IRQ_USB 0 /* IRQ0 */ -#define SE7722_FPGA_IRQ_SMC 1 /* IRQ0 */ -#define SE7722_FPGA_IRQ_MRSHPC0 2 /* IRQ1 */ -#define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */ -#define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */ -#define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */ - -#define SE7722_FPGA_IRQ_NR 6 -#define SE7722_FPGA_IRQ_BASE 110 - -#define MRSHPC_IRQ3 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3) -#define MRSHPC_IRQ2 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2) -#define MRSHPC_IRQ1 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1) -#define MRSHPC_IRQ0 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0) -#define SMC_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC) -#define USB_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB) - -/* arch/sh/boards/se/7722/irq.c */ -void init_se7722_IRQ(void); - -#define __IO_PREFIX se7722 -#include - -#endif /* __ASM_SH_SE7722_H */ diff --git a/include/asm-sh/se7751.h b/include/asm-sh/se7751.h deleted file mode 100644 index b36792ac5d66..000000000000 --- a/include/asm-sh/se7751.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef __ASM_SH_HITACHI_7751SE_H -#define __ASM_SH_HITACHI_7751SE_H - -/* - * linux/include/asm-sh/hitachi_7751se.h - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SolutionEngine support - - * Modified for 7751 Solution Engine by - * Ian da Silva and Jeremy Siegel, 2001. - */ - -/* Box specific addresses. */ - -#define PA_ROM 0x00000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_FROM 0x01000000 /* EPROM */ -#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_EXT1 0x04000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_EXT2 0x08000000 -#define PA_EXT2_SIZE 0x04000000 -#define PA_SDRAM 0x0c000000 -#define PA_SDRAM_SIZE 0x04000000 - -#define PA_EXT4 0x12000000 -#define PA_EXT4_SIZE 0x02000000 -#define PA_EXT5 0x14000000 -#define PA_EXT5_SIZE 0x04000000 -#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ - -#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */ -#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */ -#define PA_LED 0xba000000 /* LED */ -#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ - -#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ -#define MRSHPC_MODE (PA_MRSHPC + 4) -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) - -#define BCR_ILCRA (PA_BCR + 0) -#define BCR_ILCRB (PA_BCR + 2) -#define BCR_ILCRC (PA_BCR + 4) -#define BCR_ILCRD (PA_BCR + 6) -#define BCR_ILCRE (PA_BCR + 8) -#define BCR_ILCRF (PA_BCR + 10) -#define BCR_ILCRG (PA_BCR + 12) - -#define IRQ_79C973 13 - -void init_7751se_IRQ(void); - -#define __IO_PREFIX sh7751se -#include - -#endif /* __ASM_SH_HITACHI_7751SE_H */ diff --git a/include/asm-sh/se7780.h b/include/asm-sh/se7780.h deleted file mode 100644 index 40e9b41458cd..000000000000 --- a/include/asm-sh/se7780.h +++ /dev/null @@ -1,108 +0,0 @@ -#ifndef __ASM_SH_SE7780_H -#define __ASM_SH_SE7780_H - -/* - * linux/include/asm-sh/se7780.h - * - * Copyright (C) 2006,2007 Nobuhiro Iwamatsu - * - * Hitachi UL SolutionEngine 7780 Support. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include - -/* Box specific addresses. */ -#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ -#define PA_ROM 0xa0000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_FROM 0xa1000000 /* Flash-ROM */ -#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ -#define PA_EXT1 0xa4000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_SM501 PA_EXT1 /* Graphic IC (SM501) */ -#define PA_SM501_SIZE PA_EXT1_SIZE /* Graphic IC (SM501) */ -#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */ -#define PA_SDRAM_SIZE 0x08000000 - -#define PA_EXT4 0xb0000000 -#define PA_EXT4_SIZE 0x04000000 -#define PA_EXT_FLASH PA_EXT4 /* Expansion Flash-ROM */ - -#define PA_PERIPHERAL PA_AREA6_IO /* SW6-6=ON */ - -#define PA_LAN (PA_PERIPHERAL + 0) /* SMC LAN91C111 */ -#define PA_LED_DISP (PA_PERIPHERAL + 0x02000000) /* 8words LED Display */ -#define DISP_CHAR_RAM (7 << 3) -#define DISP_SEL0_ADDR (DISP_CHAR_RAM + 0) -#define DISP_SEL1_ADDR (DISP_CHAR_RAM + 1) -#define DISP_SEL2_ADDR (DISP_CHAR_RAM + 2) -#define DISP_SEL3_ADDR (DISP_CHAR_RAM + 3) -#define DISP_SEL4_ADDR (DISP_CHAR_RAM + 4) -#define DISP_SEL5_ADDR (DISP_CHAR_RAM + 5) -#define DISP_SEL6_ADDR (DISP_CHAR_RAM + 6) -#define DISP_SEL7_ADDR (DISP_CHAR_RAM + 7) - -#define DISP_UDC_RAM (5 << 3) -#define PA_FPGA (PA_PERIPHERAL + 0x03000000) /* FPGA base address */ - -/* FPGA register address and bit */ -#define FPGA_SFTRST (PA_FPGA + 0) /* Soft reset register */ -#define FPGA_INTMSK1 (PA_FPGA + 2) /* Interrupt Mask register 1 */ -#define FPGA_INTMSK2 (PA_FPGA + 4) /* Interrupt Mask register 2 */ -#define FPGA_INTSEL1 (PA_FPGA + 6) /* Interrupt select register 1 */ -#define FPGA_INTSEL2 (PA_FPGA + 8) /* Interrupt select register 2 */ -#define FPGA_INTSEL3 (PA_FPGA + 10) /* Interrupt select register 3 */ -#define FPGA_PCI_INTSEL1 (PA_FPGA + 12) /* PCI Interrupt select register 1 */ -#define FPGA_PCI_INTSEL2 (PA_FPGA + 14) /* PCI Interrupt select register 2 */ -#define FPGA_INTSET (PA_FPGA + 16) /* IRQ/IRL select register */ -#define FPGA_INTSTS1 (PA_FPGA + 18) /* Interrupt status register 1 */ -#define FPGA_INTSTS2 (PA_FPGA + 20) /* Interrupt status register 2 */ -#define FPGA_REQSEL (PA_FPGA + 22) /* REQ/GNT select register */ -#define FPGA_DBG_LED (PA_FPGA + 32) /* Debug LED(D-LED[8:1] */ -#define PA_LED FPGA_DBG_LED -#define FPGA_IVDRID (PA_FPGA + 36) /* iVDR ID Register */ -#define FPGA_IVDRPW (PA_FPGA + 38) /* iVDR Power ON Register */ -#define FPGA_MMCID (PA_FPGA + 40) /* MMC ID Register */ - -/* FPGA INTSEL position */ -/* INTSEL1 */ -#define IRQPOS_SMC91CX (0 * 4) -#define IRQPOS_SM501 (1 * 4) -/* INTSEL2 */ -#define IRQPOS_EXTINT1 (0 * 4) -#define IRQPOS_EXTINT2 (1 * 4) -#define IRQPOS_EXTINT3 (2 * 4) -#define IRQPOS_EXTINT4 (3 * 4) -/* INTSEL3 */ -#define IRQPOS_PCCPW (0 * 4) - -/* IDE interrupt */ -#define IRQ_IDE0 67 /* iVDR */ - -/* SMC interrupt */ -#define SMC_IRQ 8 - -/* SM501 interrupt */ -#define SM501_IRQ 0 - -/* interrupt pin */ -#define IRQPIN_EXTINT1 0 /* IRQ0 pin */ -#define IRQPIN_EXTINT2 1 /* IRQ1 pin */ -#define IRQPIN_EXTINT3 2 /* IRQ2 pin */ -#define IRQPIN_SMC91CX 3 /* IRQ3 pin */ -#define IRQPIN_EXTINT4 4 /* IRQ4 pin */ -#define IRQPIN_PCC0 5 /* IRQ5 pin */ -#define IRQPIN_PCC2 6 /* IRQ6 pin */ -#define IRQPIN_SM501 7 /* IRQ7 pin */ -#define IRQPIN_PCCPW 7 /* IRQ7 pin */ - -/* arch/sh/boards/se/7780/irq.c */ -void init_se7780_IRQ(void); - -#define __IO_PREFIX se7780 -#include - -#endif /* __ASM_SH_SE7780_H */ diff --git a/include/asm-sh/sections.h b/include/asm-sh/sections.h deleted file mode 100644 index 8f8f4ad400df..000000000000 --- a/include/asm-sh/sections.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_SH_SECTIONS_H -#define __ASM_SH_SECTIONS_H - -#include - -extern long __machvec_start, __machvec_end; -extern char __uncached_start, __uncached_end; -extern char _ebss[]; - -#endif /* __ASM_SH_SECTIONS_H */ - diff --git a/include/asm-sh/segment.h b/include/asm-sh/segment.h deleted file mode 100644 index 5e2725f4ac49..000000000000 --- a/include/asm-sh/segment.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef __ASM_SH_SEGMENT_H -#define __ASM_SH_SEGMENT_H - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) -#ifdef CONFIG_MMU -#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) -#else -#define USER_DS KERNEL_DS -#endif - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#define get_ds() (KERNEL_DS) - -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH_SEGMENT_H */ diff --git a/include/asm-sh/sembuf.h b/include/asm-sh/sembuf.h deleted file mode 100644 index d79f3bd570b2..000000000000 --- a/include/asm-sh/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef __ASM_SH_SEMBUF_H -#define __ASM_SH_SEMBUF_H - -/* - * The semid64_ds structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* __ASM_SH_SEMBUF_H */ diff --git a/include/asm-sh/serial.h b/include/asm-sh/serial.h deleted file mode 100644 index 21f6d330f189..000000000000 --- a/include/asm-sh/serial.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * include/asm-sh/serial.h - * - * Configuration details for 8250, 16450, 16550, etc. serial ports - */ - -#ifndef _ASM_SERIAL_H -#define _ASM_SERIAL_H - -#include - -/* - * This assumes you have a 1.8432 MHz clock for your UART. - * - * It'd be nice if someone built a serial card with a 24.576 MHz - * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. - */ -#define BASE_BAUD ( 1843200 / 16 ) - -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - -#ifdef CONFIG_HD64465 -#include - -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ - -#else - -#define SERIAL_PORT_DFNS - -#endif - -#endif /* _ASM_SERIAL_H */ diff --git a/include/asm-sh/setup.h b/include/asm-sh/setup.h deleted file mode 100644 index 55a2bd328d99..000000000000 --- a/include/asm-sh/setup.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _SH_SETUP_H -#define _SH_SETUP_H - -#define COMMAND_LINE_SIZE 256 - -#ifdef __KERNEL__ - -/* - * This is set up by the setup-routine at boot-time - */ -#define PARAM ((unsigned char *)empty_zero_page) - -#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000)) -#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004)) -#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008)) -#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c)) -#define INITRD_START (*(unsigned long *) (PARAM+0x010)) -#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014)) -/* ... */ -#define COMMAND_LINE ((char *) (PARAM+0x100)) - -int setup_early_printk(char *); -void sh_mv_setup(void); - -#endif /* __KERNEL__ */ - -#endif /* _SH_SETUP_H */ diff --git a/include/asm-sh/sfp-machine.h b/include/asm-sh/sfp-machine.h deleted file mode 100644 index d3c548443f2a..000000000000 --- a/include/asm-sh/sfp-machine.h +++ /dev/null @@ -1,84 +0,0 @@ -/* Machine-dependent software floating-point definitions. - SuperH kernel version. - Copyright (C) 1997,1998,1999 Free Software Foundation, Inc. - This file is part of the GNU C Library. - Contributed by Richard Henderson (rth@cygnus.com), - Jakub Jelinek (jj@ultra.linux.cz), - David S. Miller (davem@redhat.com) and - Peter Maydell (pmaydell@chiark.greenend.org.uk). - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Library General Public License as - published by the Free Software Foundation; either version 2 of the - License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Library General Public License for more details. - - You should have received a copy of the GNU Library General Public - License along with the GNU C Library; see the file COPYING.LIB. If - not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - -#ifndef _SFP_MACHINE_H -#define _SFP_MACHINE_H - -#define _FP_W_TYPE_SIZE 32 -#define _FP_W_TYPE unsigned long -#define _FP_WS_TYPE signed long -#define _FP_I_TYPE long - -#define _FP_MUL_MEAT_S(R,X,Y) \ - _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm) -#define _FP_MUL_MEAT_D(R,X,Y) \ - _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm) -#define _FP_MUL_MEAT_Q(R,X,Y) \ - _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm) - -#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y) -#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y) -#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y) - -#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1) -#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1 -#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1 -#define _FP_NANSIGN_S 0 -#define _FP_NANSIGN_D 0 -#define _FP_NANSIGN_Q 0 - -#define _FP_KEEPNANFRACP 1 - -/* - * If one NaN is signaling and the other is not, - * we choose that one, otherwise we choose X. - */ -#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \ - do { \ - if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs) \ - && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)) \ - { \ - R##_s = Y##_s; \ - _FP_FRAC_COPY_##wc(R,Y); \ - } \ - else \ - { \ - R##_s = X##_s; \ - _FP_FRAC_COPY_##wc(R,X); \ - } \ - R##_c = FP_CLS_NAN; \ - } while (0) - -//#define FP_ROUNDMODE FPSCR_RM -#define FP_DENORM_ZERO 1/*FPSCR_DN*/ - -/* Exception flags. */ -#define FP_EX_INVALID (1<<4) -#define FP_EX_DIVZERO (1<<3) -#define FP_EX_OVERFLOW (1<<2) -#define FP_EX_UNDERFLOW (1<<1) -#define FP_EX_INEXACT (1<<0) - -#endif - diff --git a/include/asm-sh/sh03/io.h b/include/asm-sh/sh03/io.h deleted file mode 100644 index c39c785bba94..000000000000 --- a/include/asm-sh/sh03/io.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * include/asm-sh/sh03/io.h - * - * Copyright 2004 Interface Co.,Ltd. Saito.K - * - * IO functions for an Interface CTP/PCI-SH03 - */ - -#ifndef _ASM_SH_IO_SH03_H -#define _ASM_SH_IO_SH03_H - -#include - -#define IRL0_IRQ 2 -#define IRL0_PRIORITY 13 -#define IRL1_IRQ 5 -#define IRL1_PRIORITY 10 -#define IRL2_IRQ 8 -#define IRL2_PRIORITY 7 -#define IRL3_IRQ 11 -#define IRL3_PRIORITY 4 - -void heartbeat_sh03(void); - -#endif /* _ASM_SH_IO_SH03_H */ diff --git a/include/asm-sh/sh03/sh03.h b/include/asm-sh/sh03/sh03.h deleted file mode 100644 index 19c40b80428d..000000000000 --- a/include/asm-sh/sh03/sh03.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef __ASM_SH_SH03_H -#define __ASM_SH_SH03_H - -/* - * linux/include/asm-sh/sh03/sh03.h - * - * Copyright (C) 2004 Interface Co., Ltd. Saito.K - * - * Interface CTP/PCI-SH03 support - */ - -#define PA_PCI_IO (0xbe240000) /* PCI I/O space */ -#define PA_PCI_MEM (0xbd000000) /* PCI MEM space */ - -#define PCIPAR (0xa4000cf8) /* PCI Config address */ -#define PCIPDR (0xa4000cfc) /* PCI Config data */ - -#endif /* __ASM_SH_SH03_H */ diff --git a/include/asm-sh/sh7760fb.h b/include/asm-sh/sh7760fb.h deleted file mode 100644 index 8767f61aceca..000000000000 --- a/include/asm-sh/sh7760fb.h +++ /dev/null @@ -1,197 +0,0 @@ -/* - * sh7760fb.h -- platform data for SH7760/SH7763 LCDC framebuffer driver. - * - * (c) 2006-2008 MSC Vertriebsges.m.b.H., - * Manuel Lauss - * (c) 2008 Nobuhiro Iwamatsu - */ - -#ifndef _ASM_SH_SH7760FB_H -#define _ASM_SH_SH7760FB_H - -/* - * some bits of the colormap registers should be written as zero. - * create a mask for that. - */ -#define SH7760FB_PALETTE_MASK 0x00f8fcf8 - -/* The LCDC dma engine always sets bits 27-26 to 1: this is Area3 */ -#define SH7760FB_DMA_MASK 0x0C000000 - -/* palette */ -#define LDPR(x) (((x) << 2)) - -/* framebuffer registers and bits */ -#define LDICKR 0x400 -#define LDMTR 0x402 -/* see sh7760fb.h for LDMTR bits */ -#define LDDFR 0x404 -#define LDDFR_PABD (1 << 8) -#define LDDFR_COLOR_MASK 0x7F -#define LDSMR 0x406 -#define LDSMR_ROT (1 << 13) -#define LDSARU 0x408 -#define LDSARL 0x40c -#define LDLAOR 0x410 -#define LDPALCR 0x412 -#define LDPALCR_PALS (1 << 4) -#define LDPALCR_PALEN (1 << 0) -#define LDHCNR 0x414 -#define LDHSYNR 0x416 -#define LDVDLNR 0x418 -#define LDVTLNR 0x41a -#define LDVSYNR 0x41c -#define LDACLNR 0x41e -#define LDINTR 0x420 -#define LDPMMR 0x424 -#define LDPSPR 0x426 -#define LDCNTR 0x428 -#define LDCNTR_DON (1 << 0) -#define LDCNTR_DON2 (1 << 4) - -#ifdef CONFIG_CPU_SUBTYPE_SH7763 -# define LDLIRNR 0x440 -/* LDINTR bit */ -# define LDINTR_MINTEN (1 << 15) -# define LDINTR_FINTEN (1 << 14) -# define LDINTR_VSINTEN (1 << 13) -# define LDINTR_VEINTEN (1 << 12) -# define LDINTR_MINTS (1 << 11) -# define LDINTR_FINTS (1 << 10) -# define LDINTR_VSINTS (1 << 9) -# define LDINTR_VEINTS (1 << 8) -# define VINT_START (LDINTR_VSINTEN) -# define VINT_CHECK (LDINTR_VSINTS) -#else -/* LDINTR bit */ -# define LDINTR_VINTSEL (1 << 12) -# define LDINTR_VINTE (1 << 8) -# define LDINTR_VINTS (1 << 0) -# define VINT_START (LDINTR_VINTSEL) -# define VINT_CHECK (LDINTR_VINTS) -#endif - -/* HSYNC polarity inversion */ -#define LDMTR_FLMPOL (1 << 15) - -/* VSYNC polarity inversion */ -#define LDMTR_CL1POL (1 << 14) - -/* DISPLAY-ENABLE polarity inversion */ -#define LDMTR_DISPEN_LOWACT (1 << 13) - -/* DISPLAY DATA BUS polarity inversion */ -#define LDMTR_DPOL_LOWACT (1 << 12) - -/* AC modulation signal enable */ -#define LDMTR_MCNT (1 << 10) - -/* Disable output of HSYNC during VSYNC period */ -#define LDMTR_CL1CNT (1 << 9) - -/* Disable output of VSYNC during VSYNC period */ -#define LDMTR_CL2CNT (1 << 8) - -/* Display types supported by the LCDC */ -#define LDMTR_STN_MONO_4 0x00 -#define LDMTR_STN_MONO_8 0x01 -#define LDMTR_STN_COLOR_4 0x08 -#define LDMTR_STN_COLOR_8 0x09 -#define LDMTR_STN_COLOR_12 0x0A -#define LDMTR_STN_COLOR_16 0x0B -#define LDMTR_DSTN_MONO_8 0x11 -#define LDMTR_DSTN_MONO_16 0x13 -#define LDMTR_DSTN_COLOR_8 0x19 -#define LDMTR_DSTN_COLOR_12 0x1A -#define LDMTR_DSTN_COLOR_16 0x1B -#define LDMTR_TFT_COLOR_16 0x2B - -/* framebuffer color layout */ -#define LDDFR_1BPP_MONO 0x00 -#define LDDFR_2BPP_MONO 0x01 -#define LDDFR_4BPP_MONO 0x02 -#define LDDFR_6BPP_MONO 0x04 -#define LDDFR_4BPP 0x0A -#define LDDFR_8BPP 0x0C -#define LDDFR_16BPP_RGB555 0x1D -#define LDDFR_16BPP_RGB565 0x2D - -/* LCDC Pixclock sources */ -#define LCDC_CLKSRC_BUSCLOCK 0 -#define LCDC_CLKSRC_PERIPHERAL 1 -#define LCDC_CLKSRC_EXTERNAL 2 - -#define LDICKR_CLKSRC(x) \ - (((x) & 3) << 12) - -/* LCDC pixclock input divider. Set to 1 at a minimum! */ -#define LDICKR_CLKDIV(x) \ - ((x) & 0x1f) - -struct sh7760fb_platdata { - - /* Set this member to a valid fb_videmode for the display you - * wish to use. The following members must be initialized: - * xres, yres, hsync_len, vsync_len, sync, - * {left,right,upper,lower}_margin. - * The driver uses the above members to calculate register values - * and memory requirements. Other members are ignored but may - * be used by other framebuffer layer components. - */ - struct fb_videomode *def_mode; - - /* LDMTR includes display type and signal polarity. The - * HSYNC/VSYNC polarities are derived from the fb_var_screeninfo - * data above; however the polarities of the following signals - * must be encoded in the ldmtr member: - * Display Enable signal (default high-active) DISPEN_LOWACT - * Display Data signals (default high-active) DPOL_LOWACT - * AC Modulation signal (default off) MCNT - * Hsync-During-Vsync suppression (default off) CL1CNT - * Vsync-during-vsync suppression (default off) CL2CNT - * NOTE: also set a display type! - * (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16}) - */ - u16 ldmtr; - - /* LDDFR controls framebuffer image format (depth, organization) - * Use ONE of the LDDFR_?BPP_* macros! - */ - u16 lddfr; - - /* LDPMMR and LDPSPR control the timing of the power signals - * for the display. Please read the SH7760 Hardware Manual, - * Chapters 30.3.17, 30.3.18 and 30.4.6! - */ - u16 ldpmmr; - u16 ldpspr; - - /* LDACLNR contains the line numbers after which the AC modulation - * signal is to toggle. Set to ZERO for TFTs or displays which - * do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual). - */ - u16 ldaclnr; - - /* LDICKR contains information on pixelclock source and config. - * Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros. - * minimal value for CLKDIV() must be 1!. - */ - u16 ldickr; - - /* set this member to 1 if you wish to use the LCDC's hardware - * rotation function. This is limited to displays <= 320x200 - * pixels resolution! - */ - int rotate; /* set to 1 to rotate 90 CCW */ - - /* set this to 1 to suppress vsync irq use. */ - int novsync; - - /* blanking hook for platform. Set this if your platform can do - * more than the LCDC in terms of blanking (e.g. disable clock - * generator / backlight power supply / etc. - */ - void (*blank) (int); -}; - -#endif /* _ASM_SH_SH7760FB_H */ diff --git a/include/asm-sh/sh7763rdp.h b/include/asm-sh/sh7763rdp.h deleted file mode 100644 index 8750cc852977..000000000000 --- a/include/asm-sh/sh7763rdp.h +++ /dev/null @@ -1,54 +0,0 @@ -#ifndef __ASM_SH_SH7763RDP_H -#define __ASM_SH_SH7763RDP_H - -/* - * linux/include/asm-sh/sh7763drp.h - * - * Copyright (C) 2008 Renesas Solutions - * Copyright (C) 2008 Nobuhiro Iwamatsu - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#include - -/* clock control */ -#define MSTPCR1 0xFFC80038 - -/* PORT */ -#define PORT_PSEL0 0xFFEF0070 -#define PORT_PSEL1 0xFFEF0072 -#define PORT_PSEL2 0xFFEF0074 -#define PORT_PSEL3 0xFFEF0076 -#define PORT_PSEL4 0xFFEF0078 - -#define PORT_PACR 0xFFEF0000 -#define PORT_PCCR 0xFFEF0004 -#define PORT_PFCR 0xFFEF000A -#define PORT_PGCR 0xFFEF000C -#define PORT_PHCR 0xFFEF000E -#define PORT_PICR 0xFFEF0010 -#define PORT_PJCR 0xFFEF0012 -#define PORT_PKCR 0xFFEF0014 -#define PORT_PLCR 0xFFEF0016 -#define PORT_PMCR 0xFFEF0018 -#define PORT_PNCR 0xFFEF001A - -/* FPGA */ -#define CPLD_BOARD_ID_ERV_REG 0xB1000000 -#define CPLD_CPLD_CMD_REG 0xB1000006 - -/* - * USB SH7763RDP board can use Host only. - */ -#define USB_USBHSC 0xFFEC80f0 - -/* arch/sh/boards/renesas/sh7763rdp/irq.c */ -void init_sh7763rdp_IRQ(void); -int sh7763rdp_irq_demux(int irq); -#define __IO_PREFIX sh7763rdp -#include - -#endif /* __ASM_SH_SH7763RDP_H */ diff --git a/include/asm-sh/sh7785lcr.h b/include/asm-sh/sh7785lcr.h deleted file mode 100644 index 1ce27d5c7491..000000000000 --- a/include/asm-sh/sh7785lcr.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef __ASM_SH_RENESAS_SH7785LCR_H -#define __ASM_SH_RENESAS_SH7785LCR_H - -/* - * This board has 2 physical memory maps. - * It can be changed with DIP switch(S2-5). - * - * phys address | S2-5 = OFF | S2-5 = ON - * -----------------------------+---------------+--------------- - * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash - * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD - * 0x06000000 - 0x07ffffff(CS1) | reserved | I2C - * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM - * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM - * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 - * 0x14000000 - 0x17ffffff(CS5) | I2C | USB - * 0x18000000 - 0x1bffffff(CS6) | reserved | SD - * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) - * - */ - -#define NOR_FLASH_ADDR 0x00000000 -#define NOR_FLASH_SIZE 0x04000000 - -#define PLD_BASE_ADDR 0x04000000 -#define PLD_PCICR (PLD_BASE_ADDR + 0x00) -#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02) -#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04) -#define PLD_POFCR (PLD_BASE_ADDR + 0x06) -#define PLD_LEDCR (PLD_BASE_ADDR + 0x08) -#define PLD_SWSR (PLD_BASE_ADDR + 0x0a) -#define PLD_VERSR (PLD_BASE_ADDR + 0x0c) -#define PLD_MMSR (PLD_BASE_ADDR + 0x0e) - -#define SM107_MEM_ADDR 0x10000000 -#define SM107_MEM_SIZE 0x00e00000 -#define SM107_REG_ADDR 0x13e00000 -#define SM107_REG_SIZE 0x00200000 - -#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS) -#define R8A66597_ADDR 0x14000000 /* USB */ -#define CG200_ADDR 0x18000000 /* SD */ -#define PCA9564_ADDR 0x06000000 /* I2C */ -#else -#define R8A66597_ADDR 0x08000000 -#define CG200_ADDR 0x0c000000 -#define PCA9564_ADDR 0x14000000 -#endif - -#define R8A66597_SIZE 0x00000100 -#define CG200_SIZE 0x00010000 -#define PCA9564_SIZE 0x00000100 - -#endif /* __ASM_SH_RENESAS_SH7785LCR_H */ - diff --git a/include/asm-sh/sh_bios.h b/include/asm-sh/sh_bios.h deleted file mode 100644 index 0ca261956e3d..000000000000 --- a/include/asm-sh/sh_bios.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef __ASM_SH_BIOS_H -#define __ASM_SH_BIOS_H - -/* - * Copyright (C) 2000 Greg Banks, Mitch Davis - * C API to interface to the standard LinuxSH BIOS - * usually from within the early stages of kernel boot. - */ - - -extern void sh_bios_console_write(const char *buf, unsigned int len); -extern void sh_bios_char_out(char ch); -extern int sh_bios_in_gdb_mode(void); -extern void sh_bios_gdb_detach(void); - -extern void sh_bios_get_node_addr(unsigned char *node_addr); -extern void sh_bios_shutdown(unsigned int how); - -#endif /* __ASM_SH_BIOS_H */ diff --git a/include/asm-sh/sh_keysc.h b/include/asm-sh/sh_keysc.h deleted file mode 100644 index b5a4dd5a9729..000000000000 --- a/include/asm-sh/sh_keysc.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_KEYSC_H__ -#define __ASM_KEYSC_H__ - -#define SH_KEYSC_MAXKEYS 30 - -struct sh_keysc_info { - enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode; - int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */ - int delay; - int keycodes[SH_KEYSC_MAXKEYS]; -}; - -#endif /* __ASM_KEYSC_H__ */ diff --git a/include/asm-sh/sh_mobile_lcdc.h b/include/asm-sh/sh_mobile_lcdc.h deleted file mode 100644 index 27677727df4d..000000000000 --- a/include/asm-sh/sh_mobile_lcdc.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef __ASM_SH_MOBILE_LCDC_H__ -#define __ASM_SH_MOBILE_LCDC_H__ - -#include - -enum { RGB8, /* 24bpp, 8:8:8 */ - RGB9, /* 18bpp, 9:9 */ - RGB12A, /* 24bpp, 12:12 */ - RGB12B, /* 12bpp */ - RGB16, /* 16bpp */ - RGB18, /* 18bpp */ - RGB24, /* 24bpp */ - SYS8A, /* 24bpp, 8:8:8 */ - SYS8B, /* 18bpp, 8:8:2 */ - SYS8C, /* 18bpp, 2:8:8 */ - SYS8D, /* 16bpp, 8:8 */ - SYS9, /* 18bpp, 9:9 */ - SYS12, /* 24bpp, 12:12 */ - SYS16A, /* 16bpp */ - SYS16B, /* 18bpp, 16:2 */ - SYS16C, /* 18bpp, 2:16 */ - SYS18, /* 18bpp */ - SYS24 };/* 24bpp */ - -enum { LCDC_CHAN_DISABLED = 0, - LCDC_CHAN_MAINLCD, - LCDC_CHAN_SUBLCD }; - -enum { LCDC_CLK_BUS, LCDC_CLK_PERIPHERAL, LCDC_CLK_EXTERNAL }; - -struct sh_mobile_lcdc_sys_bus_cfg { - unsigned long ldmt2r; - unsigned long ldmt3r; -}; - -struct sh_mobile_lcdc_sys_bus_ops { - void (*write_index)(void *handle, unsigned long data); - void (*write_data)(void *handle, unsigned long data); - unsigned long (*read_data)(void *handle); -}; - -struct sh_mobile_lcdc_board_cfg { - void *board_data; - int (*setup_sys)(void *board_data, void *sys_ops_handle, - struct sh_mobile_lcdc_sys_bus_ops *sys_ops); - void (*display_on)(void *board_data); - void (*display_off)(void *board_data); -}; - -struct sh_mobile_lcdc_chan_cfg { - int chan; - int bpp; - int interface_type; /* selects RGBn or SYSn I/F, see above */ - int clock_divider; - struct fb_videomode lcd_cfg; - struct sh_mobile_lcdc_board_cfg board_cfg; - struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */ -}; - -struct sh_mobile_lcdc_info { - unsigned long lddckr; - int clock_source; - struct sh_mobile_lcdc_chan_cfg ch[2]; -}; - -#endif /* __ASM_SH_MOBILE_LCDC_H__ */ diff --git a/include/asm-sh/shmbuf.h b/include/asm-sh/shmbuf.h deleted file mode 100644 index b2101f490521..000000000000 --- a/include/asm-sh/shmbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef __ASM_SH_SHMBUF_H -#define __ASM_SH_SHMBUF_H - -/* - * The shmid64_ds structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* __ASM_SH_SHMBUF_H */ diff --git a/include/asm-sh/shmin.h b/include/asm-sh/shmin.h deleted file mode 100644 index 36ba138a81fb..000000000000 --- a/include/asm-sh/shmin.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_SH_SHMIN_H -#define __ASM_SH_SHMIN_H - -#define SHMIN_IO_BASE 0xb0000000UL - -#define SHMIN_NE_IRQ IRQ2_IRQ -#define SHMIN_NE_BASE 0x300 - -#endif diff --git a/include/asm-sh/shmparam.h b/include/asm-sh/shmparam.h deleted file mode 100644 index ba1758d90106..000000000000 --- a/include/asm-sh/shmparam.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-sh/shmparam.h - * - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_SHMPARAM_H -#define __ASM_SH_SHMPARAM_H - -/* - * SH-4 and SH-3 7705 have an aliasing dcache. Bump this up to a sensible value - * for everyone, and work out the specifics from the probed cache descriptor. - */ -#define SHMLBA 0x4000 /* attach addr a multiple of this */ - -#define __ARCH_FORCE_SHMLBA - -#endif /* __ASM_SH_SHMPARAM_H */ diff --git a/include/asm-sh/sigcontext.h b/include/asm-sh/sigcontext.h deleted file mode 100644 index 8ce1435bc0bf..000000000000 --- a/include/asm-sh/sigcontext.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef __ASM_SH_SIGCONTEXT_H -#define __ASM_SH_SIGCONTEXT_H - -struct sigcontext { - unsigned long oldmask; - -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) - /* CPU registers */ - unsigned long long sc_regs[63]; - unsigned long long sc_tregs[8]; - unsigned long long sc_pc; - unsigned long long sc_sr; - - /* FPU registers */ - unsigned long long sc_fpregs[32]; - unsigned int sc_fpscr; - unsigned int sc_fpvalid; -#else - /* CPU registers */ - unsigned long sc_regs[16]; - unsigned long sc_pc; - unsigned long sc_pr; - unsigned long sc_sr; - unsigned long sc_gbr; - unsigned long sc_mach; - unsigned long sc_macl; - -#if defined(__SH4__) || defined(CONFIG_CPU_SH4) || \ - defined(__SH2A__) || defined(CONFIG_CPU_SH2A) - /* FPU registers */ - unsigned long sc_fpregs[16]; - unsigned long sc_xfpregs[16]; - unsigned int sc_fpscr; - unsigned int sc_fpul; - unsigned int sc_ownedfp; -#endif -#endif -}; - -#endif /* __ASM_SH_SIGCONTEXT_H */ diff --git a/include/asm-sh/siginfo.h b/include/asm-sh/siginfo.h deleted file mode 100644 index 813040ed68a9..000000000000 --- a/include/asm-sh/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_SIGINFO_H -#define __ASM_SH_SIGINFO_H - -#include - -#endif /* __ASM_SH_SIGINFO_H */ diff --git a/include/asm-sh/signal.h b/include/asm-sh/signal.h deleted file mode 100644 index 5c5c1e852089..000000000000 --- a/include/asm-sh/signal.h +++ /dev/null @@ -1,160 +0,0 @@ -#ifndef __ASM_SH_SIGNAL_H -#define __ASM_SH_SIGNAL_H - -#include - -/* Avoid too many header ordering problems. */ -struct pt_regs; -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -#include - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_SIGNAL_H */ diff --git a/include/asm-sh/smc37c93x.h b/include/asm-sh/smc37c93x.h deleted file mode 100644 index 585da2a8fc45..000000000000 --- a/include/asm-sh/smc37c93x.h +++ /dev/null @@ -1,190 +0,0 @@ -#ifndef __ASM_SH_SMC37C93X_H -#define __ASM_SH_SMC37C93X_H - -/* - * linux/include/asm-sh/smc37c93x.h - * - * Copyright (C) 2000 Kazumoto Kojima - * - * SMSC 37C93x Super IO Chip support - */ - -/* Default base I/O address */ -#define FDC_PRIMARY_BASE 0x3f0 -#define IDE1_PRIMARY_BASE 0x1f0 -#define IDE1_SECONDARY_BASE 0x170 -#define PARPORT_PRIMARY_BASE 0x378 -#define COM1_PRIMARY_BASE 0x2f8 -#define COM2_PRIMARY_BASE 0x3f8 -#define RTC_PRIMARY_BASE 0x070 -#define KBC_PRIMARY_BASE 0x060 -#define AUXIO_PRIMARY_BASE 0x000 /* XXX */ - -/* Logical device number */ -#define LDN_FDC 0 -#define LDN_IDE1 1 -#define LDN_IDE2 2 -#define LDN_PARPORT 3 -#define LDN_COM1 4 -#define LDN_COM2 5 -#define LDN_RTC 6 -#define LDN_KBC 7 -#define LDN_AUXIO 8 - -/* Configuration port and key */ -#define CONFIG_PORT 0x3f0 -#define INDEX_PORT CONFIG_PORT -#define DATA_PORT 0x3f1 -#define CONFIG_ENTER 0x55 -#define CONFIG_EXIT 0xaa - -/* Configuration index */ -#define CURRENT_LDN_INDEX 0x07 -#define POWER_CONTROL_INDEX 0x22 -#define ACTIVATE_INDEX 0x30 -#define IO_BASE_HI_INDEX 0x60 -#define IO_BASE_LO_INDEX 0x61 -#define IRQ_SELECT_INDEX 0x70 -#define DMA_SELECT_INDEX 0x74 - -#define GPIO46_INDEX 0xc6 -#define GPIO47_INDEX 0xc7 - -/* UART stuff. Only for debugging. */ -/* UART Register */ - -#define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */ -#define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */ -#define UART_IER 0x2 /* Interrupt Enable Register */ -#define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */ -#define UART_FCR 0x4 /* FIFO Control Register (Write Only) */ -#define UART_LCR 0x6 /* Line Control Register */ -#define UART_MCR 0x8 /* MODEM Control Register */ -#define UART_LSR 0xa /* Line Status Register */ -#define UART_MSR 0xc /* MODEM Status Register */ -#define UART_SCR 0xe /* Scratch Register */ -#define UART_DLL 0x0 /* Divisor Latch (LS) */ -#define UART_DLM 0x2 /* Divisor Latch (MS) */ - -#ifndef __ASSEMBLY__ -typedef struct uart_reg { - volatile __u16 rbr; - volatile __u16 ier; - volatile __u16 iir; - volatile __u16 lcr; - volatile __u16 mcr; - volatile __u16 lsr; - volatile __u16 msr; - volatile __u16 scr; -} uart_reg; -#endif /* ! __ASSEMBLY__ */ - -/* Alias for Write Only Register */ - -#define thr rbr -#define tcr iir - -/* Alias for Divisor Latch Register */ - -#define dll rbr -#define dlm ier -#define fcr iir - -/* Interrupt Enable Register */ - -#define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */ -#define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */ -#define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */ -#define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */ - -/* Interrupt Ident Register */ - -#define IIR_IP 0x0100 /* "0" if Interrupt Pending */ -#define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */ -#define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */ -#define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */ -#define IIR_FIFO 0xc000 /* FIFOs enabled */ - -/* FIFO Control Register */ - -#define FCR_FEN 0x0100 /* FIFO enable */ -#define FCR_RFRES 0x0200 /* Receiver FIFO reset */ -#define FCR_TFRES 0x0400 /* Transmitter FIFO reset */ -#define FCR_DMA 0x0800 /* DMA mode select */ -#define FCR_RTL 0x4000 /* Receiver triger (LSB) */ -#define FCR_RTM 0x8000 /* Receiver triger (MSB) */ - -/* Line Control Register */ - -#define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */ -#define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */ -#define LCR_STB 0x0400 /* Number of Stop Bits */ -#define LCR_PEN 0x0800 /* Parity Enable */ -#define LCR_EPS 0x1000 /* Even Parity Select */ -#define LCR_SP 0x2000 /* Stick Parity */ -#define LCR_SB 0x4000 /* Set Break */ -#define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */ - -/* MODEM Control Register */ - -#define MCR_DTR 0x0100 /* Data Terminal Ready */ -#define MCR_RTS 0x0200 /* Request to Send */ -#define MCR_OUT1 0x0400 /* Out 1 */ -#define MCR_IRQEN 0x0800 /* IRQ Enable */ -#define MCR_LOOP 0x1000 /* Loop */ - -/* Line Status Register */ - -#define LSR_DR 0x0100 /* Data Ready */ -#define LSR_OE 0x0200 /* Overrun Error */ -#define LSR_PE 0x0400 /* Parity Error */ -#define LSR_FE 0x0800 /* Framing Error */ -#define LSR_BI 0x1000 /* Break Interrupt */ -#define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */ -#define LSR_TEMT 0x4000 /* Transmitter Empty */ -#define LSR_FIFOE 0x8000 /* Receiver FIFO error */ - -/* MODEM Status Register */ - -#define MSR_DCTS 0x0100 /* Delta Clear to Send */ -#define MSR_DDSR 0x0200 /* Delta Data Set Ready */ -#define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */ -#define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */ -#define MSR_CTS 0x1000 /* Clear to Send */ -#define MSR_DSR 0x2000 /* Data Set Ready */ -#define MSR_RI 0x4000 /* Ring Indicator */ -#define MSR_DCD 0x8000 /* Data Carrier Detect */ - -/* Baud Rate Divisor */ - -#define UART_CLK (1843200) /* 1.8432 MHz */ -#define UART_BAUD(x) (UART_CLK / (16 * (x))) - -/* RTC register definition */ -#define RTC_SECONDS 0 -#define RTC_SECONDS_ALARM 1 -#define RTC_MINUTES 2 -#define RTC_MINUTES_ALARM 3 -#define RTC_HOURS 4 -#define RTC_HOURS_ALARM 5 -#define RTC_DAY_OF_WEEK 6 -#define RTC_DAY_OF_MONTH 7 -#define RTC_MONTH 8 -#define RTC_YEAR 9 -#define RTC_FREQ_SELECT 10 -# define RTC_UIP 0x80 -# define RTC_DIV_CTL 0x70 -/* This RTC can work under 32.768KHz clock only. */ -# define RTC_OSC_ENABLE 0x20 -# define RTC_OSC_DISABLE 0x00 -#define RTC_CONTROL 11 -# define RTC_SET 0x80 -# define RTC_PIE 0x40 -# define RTC_AIE 0x20 -# define RTC_UIE 0x10 -# define RTC_SQWE 0x08 -# define RTC_DM_BINARY 0x04 -# define RTC_24H 0x02 -# define RTC_DST_EN 0x01 - -#endif /* __ASM_SH_SMC37C93X_H */ diff --git a/include/asm-sh/smp.h b/include/asm-sh/smp.h deleted file mode 100644 index 593343cd26ee..000000000000 --- a/include/asm-sh/smp.h +++ /dev/null @@ -1,50 +0,0 @@ -#ifndef __ASM_SH_SMP_H -#define __ASM_SH_SMP_H - -#include -#include - -#ifdef CONFIG_SMP - -#include -#include -#include - -#define raw_smp_processor_id() (current_thread_info()->cpu) -#define hard_smp_processor_id() plat_smp_processor_id() - -/* Map from cpu id to sequential logical cpu number. */ -extern int __cpu_number_map[NR_CPUS]; -#define cpu_number_map(cpu) __cpu_number_map[cpu] - -/* The reverse map from sequential logical cpu number to cpu id. */ -extern int __cpu_logical_map[NR_CPUS]; -#define cpu_logical_map(cpu) __cpu_logical_map[cpu] - -/* I've no idea what the real meaning of this is */ -#define PROC_CHANGE_PENALTY 20 - -#define NO_PROC_ID (-1) - -#define SMP_MSG_FUNCTION 0 -#define SMP_MSG_RESCHEDULE 1 -#define SMP_MSG_FUNCTION_SINGLE 2 -#define SMP_MSG_NR 3 - -void plat_smp_setup(void); -void plat_prepare_cpus(unsigned int max_cpus); -int plat_smp_processor_id(void); -void plat_start_cpu(unsigned int cpu, unsigned long entry_point); -void plat_send_ipi(unsigned int cpu, unsigned int message); -int plat_register_ipi_handler(unsigned int message, - void (*handler)(void *), void *arg); -extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi(cpumask_t mask); - -#else - -#define hard_smp_processor_id() (0) - -#endif /* CONFIG_SMP */ - -#endif /* __ASM_SH_SMP_H */ diff --git a/include/asm-sh/snapgear.h b/include/asm-sh/snapgear.h deleted file mode 100644 index 042d95f51c4d..000000000000 --- a/include/asm-sh/snapgear.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * include/asm-sh/snapgear.h - * - * Modified version of io_se.h for the snapgear-specific functions. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for a SnapGear - */ - -#ifndef _ASM_SH_IO_SNAPGEAR_H -#define _ASM_SH_IO_SNAPGEAR_H - -#if defined(CONFIG_CPU_SH4) -/* - * The external interrupt lines, these take up ints 0 - 15 inclusive - * depending on the priority for the interrupt. In fact the priority - * is the interrupt :-) - */ - -#define IRL0_IRQ 2 -#define IRL0_PRIORITY 13 - -#define IRL1_IRQ 5 -#define IRL1_PRIORITY 10 - -#define IRL2_IRQ 8 -#define IRL2_PRIORITY 7 - -#define IRL3_IRQ 11 -#define IRL3_PRIORITY 4 -#endif - -#define __IO_PREFIX snapgear -#include - -#ifdef CONFIG_SH_SECUREEDGE5410 -/* - * We need to remember what was written to the ioport as some bits - * are shared with other functions and you cannot read back what was - * written :-| - * - * Bit Read Write - * ----------------------------------------------- - * D0 DCD on ttySC1 power - * D1 Reset Switch heatbeat - * D2 ttySC0 CTS (7100) LAN - * D3 - WAN - * D4 ttySC0 DCD (7100) CONSOLE - * D5 - ONLINE - * D6 - VPN - * D7 - DTR on ttySC1 - * D8 - ttySC0 RTS (7100) - * D9 - ttySC0 DTR (7100) - * D10 - RTC SCLK - * D11 RTC DATA RTC DATA - * D12 - RTS RESET - */ - -#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000) -extern unsigned short secureedge5410_ioport; - -#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \ - (secureedge5410_ioport = \ - ((secureedge5410_ioport & ~(mask)) | ((val) & (mask))))) -#define SECUREEDGE_READ_IOPORT() \ - ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817)) -#endif - -#endif /* _ASM_SH_IO_SNAPGEAR_H */ diff --git a/include/asm-sh/socket.h b/include/asm-sh/socket.h deleted file mode 100644 index 6d4bf6512959..000000000000 --- a/include/asm-sh/socket.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef __ASM_SH_SOCKET_H -#define __ASM_SH_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_RCVBUFFORCE 32 -#define SO_SNDBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#endif /* __ASM_SH_SOCKET_H */ diff --git a/include/asm-sh/sockios.h b/include/asm-sh/sockios.h deleted file mode 100644 index cf8b96b1f9ab..000000000000 --- a/include/asm-sh/sockios.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __ASM_SH_SOCKIOS_H -#define __ASM_SH_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOGETOWN _IOR('f', 123, int) -#define FIOSETOWN _IOW('f', 124, int) - -#define SIOCATMARK _IOR('s', 7, int) -#define SIOCSPGRP _IOW('s', 8, pid_t) -#define SIOCGPGRP _IOR('s', 9, pid_t) - -#define SIOCGSTAMP _IOR('s', 100, struct timeval) /* Get stamp (timeval) */ -#define SIOCGSTAMPNS _IOR('s', 101, struct timespec) /* Get stamp (timespec) */ -#endif /* __ASM_SH_SOCKIOS_H */ diff --git a/include/asm-sh/sparsemem.h b/include/asm-sh/sparsemem.h deleted file mode 100644 index 547a540b6667..000000000000 --- a/include/asm-sh/sparsemem.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_SH_SPARSEMEM_H -#define __ASM_SH_SPARSEMEM_H - -#ifdef __KERNEL__ -/* - * SECTION_SIZE_BITS 2^N: how big each section will be - * MAX_PHYSADDR_BITS 2^N: how much physical address space we have - * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space - */ -#define SECTION_SIZE_BITS 26 -#define MAX_PHYSADDR_BITS 32 -#define MAX_PHYSMEM_BITS 32 - -#endif - -#endif /* __ASM_SH_SPARSEMEM_H */ diff --git a/include/asm-sh/spi.h b/include/asm-sh/spi.h deleted file mode 100644 index e96f5b0953c8..000000000000 --- a/include/asm-sh/spi.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_SPI_H__ -#define __ASM_SPI_H__ - -struct sh_spi_info; - -struct sh_spi_info { - int bus_num; - int num_chipselect; - - void (*chip_select)(struct sh_spi_info *spi, int cs, int state); -}; - -#endif /* __ASM_SPI_H__ */ diff --git a/include/asm-sh/spinlock.h b/include/asm-sh/spinlock.h deleted file mode 100644 index e793181d64da..000000000000 --- a/include/asm-sh/spinlock.h +++ /dev/null @@ -1,223 +0,0 @@ -/* - * include/asm-sh/spinlock.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * Copyright (C) 2006, 2007 Akio Idehara - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_SPINLOCK_H -#define __ASM_SH_SPINLOCK_H - -/* - * The only locking implemented here uses SH-4A opcodes. For others, - * split this out as per atomic-*.h. - */ -#ifndef CONFIG_CPU_SH4A -#error "Need movli.l/movco.l for spinlocks" -#endif - -/* - * Your basic SMP spinlocks, allowing only a single CPU anywhere - */ - -#define __raw_spin_is_locked(x) ((x)->lock <= 0) -#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) -#define __raw_spin_unlock_wait(x) \ - do { cpu_relax(); } while ((x)->lock) - -/* - * Simple spin lock operations. There are two variants, one clears IRQ's - * on the local processor, one does not. - * - * We make no fairness assumptions. They have a cost. - */ -static inline void __raw_spin_lock(raw_spinlock_t *lock) -{ - unsigned long tmp; - unsigned long oldval; - - __asm__ __volatile__ ( - "1: \n\t" - "movli.l @%2, %0 ! __raw_spin_lock \n\t" - "mov %0, %1 \n\t" - "mov #0, %0 \n\t" - "movco.l %0, @%2 \n\t" - "bf 1b \n\t" - "cmp/pl %1 \n\t" - "bf 1b \n\t" - : "=&z" (tmp), "=&r" (oldval) - : "r" (&lock->lock) - : "t", "memory" - ); -} - -static inline void __raw_spin_unlock(raw_spinlock_t *lock) -{ - unsigned long tmp; - - __asm__ __volatile__ ( - "mov #1, %0 ! __raw_spin_unlock \n\t" - "mov.l %0, @%1 \n\t" - : "=&z" (tmp) - : "r" (&lock->lock) - : "t", "memory" - ); -} - -static inline int __raw_spin_trylock(raw_spinlock_t *lock) -{ - unsigned long tmp, oldval; - - __asm__ __volatile__ ( - "1: \n\t" - "movli.l @%2, %0 ! __raw_spin_trylock \n\t" - "mov %0, %1 \n\t" - "mov #0, %0 \n\t" - "movco.l %0, @%2 \n\t" - "bf 1b \n\t" - "synco \n\t" - : "=&z" (tmp), "=&r" (oldval) - : "r" (&lock->lock) - : "t", "memory" - ); - - return oldval; -} - -/* - * Read-write spinlocks, allowing multiple readers but only one writer. - * - * NOTE! it is quite common to have readers in interrupts but no interrupt - * writers. For those circumstances we can "mix" irq-safe locks - any writer - * needs to get a irq-safe write-lock, but readers can get non-irqsafe - * read-locks. - */ - -/** - * read_can_lock - would read_trylock() succeed? - * @lock: the rwlock in question. - */ -#define __raw_read_can_lock(x) ((x)->lock > 0) - -/** - * write_can_lock - would write_trylock() succeed? - * @lock: the rwlock in question. - */ -#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS) - -static inline void __raw_read_lock(raw_rwlock_t *rw) -{ - unsigned long tmp; - - __asm__ __volatile__ ( - "1: \n\t" - "movli.l @%1, %0 ! __raw_read_lock \n\t" - "cmp/pl %0 \n\t" - "bf 1b \n\t" - "add #-1, %0 \n\t" - "movco.l %0, @%1 \n\t" - "bf 1b \n\t" - : "=&z" (tmp) - : "r" (&rw->lock) - : "t", "memory" - ); -} - -static inline void __raw_read_unlock(raw_rwlock_t *rw) -{ - unsigned long tmp; - - __asm__ __volatile__ ( - "1: \n\t" - "movli.l @%1, %0 ! __raw_read_unlock \n\t" - "add #1, %0 \n\t" - "movco.l %0, @%1 \n\t" - "bf 1b \n\t" - : "=&z" (tmp) - : "r" (&rw->lock) - : "t", "memory" - ); -} - -static inline void __raw_write_lock(raw_rwlock_t *rw) -{ - unsigned long tmp; - - __asm__ __volatile__ ( - "1: \n\t" - "movli.l @%1, %0 ! __raw_write_lock \n\t" - "cmp/hs %2, %0 \n\t" - "bf 1b \n\t" - "sub %2, %0 \n\t" - "movco.l %0, @%1 \n\t" - "bf 1b \n\t" - : "=&z" (tmp) - : "r" (&rw->lock), "r" (RW_LOCK_BIAS) - : "t", "memory" - ); -} - -static inline void __raw_write_unlock(raw_rwlock_t *rw) -{ - __asm__ __volatile__ ( - "mov.l %1, @%0 ! __raw_write_unlock \n\t" - : - : "r" (&rw->lock), "r" (RW_LOCK_BIAS) - : "t", "memory" - ); -} - -static inline int __raw_read_trylock(raw_rwlock_t *rw) -{ - unsigned long tmp, oldval; - - __asm__ __volatile__ ( - "1: \n\t" - "movli.l @%2, %0 ! __raw_read_trylock \n\t" - "mov %0, %1 \n\t" - "cmp/pl %0 \n\t" - "bf 2f \n\t" - "add #-1, %0 \n\t" - "movco.l %0, @%2 \n\t" - "bf 1b \n\t" - "2: \n\t" - "synco \n\t" - : "=&z" (tmp), "=&r" (oldval) - : "r" (&rw->lock) - : "t", "memory" - ); - - return (oldval > 0); -} - -static inline int __raw_write_trylock(raw_rwlock_t *rw) -{ - unsigned long tmp, oldval; - - __asm__ __volatile__ ( - "1: \n\t" - "movli.l @%2, %0 ! __raw_write_trylock \n\t" - "mov %0, %1 \n\t" - "cmp/hs %3, %0 \n\t" - "bf 2f \n\t" - "sub %3, %0 \n\t" - "2: \n\t" - "movco.l %0, @%2 \n\t" - "bf 1b \n\t" - "synco \n\t" - : "=&z" (tmp), "=&r" (oldval) - : "r" (&rw->lock), "r" (RW_LOCK_BIAS) - : "t", "memory" - ); - - return (oldval > (RW_LOCK_BIAS - 1)); -} - -#define _raw_spin_relax(lock) cpu_relax() -#define _raw_read_relax(lock) cpu_relax() -#define _raw_write_relax(lock) cpu_relax() - -#endif /* __ASM_SH_SPINLOCK_H */ diff --git a/include/asm-sh/spinlock_types.h b/include/asm-sh/spinlock_types.h deleted file mode 100644 index b4d244e7b60c..000000000000 --- a/include/asm-sh/spinlock_types.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_SH_SPINLOCK_TYPES_H -#define __ASM_SH_SPINLOCK_TYPES_H - -#ifndef __LINUX_SPINLOCK_TYPES_H -# error "please don't include this file directly" -#endif - -typedef struct { - volatile unsigned int lock; -} raw_spinlock_t; - -#define __RAW_SPIN_LOCK_UNLOCKED { 1 } - -typedef struct { - volatile unsigned int lock; -} raw_rwlock_t; - -#define RW_LOCK_BIAS 0x01000000 -#define __RAW_RW_LOCK_UNLOCKED { RW_LOCK_BIAS } - -#endif diff --git a/include/asm-sh/stat.h b/include/asm-sh/stat.h deleted file mode 100644 index e1810cc6e3da..000000000000 --- a/include/asm-sh/stat.h +++ /dev/null @@ -1,138 +0,0 @@ -#ifndef __ASM_SH_STAT_H -#define __ASM_SH_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) -struct stat { - unsigned short st_dev; - unsigned short __pad1; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned short __pad2; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned short st_dev; - unsigned char __pad0[10]; - - unsigned long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned short st_rdev; - unsigned char __pad3[10]; - - long long st_size; - unsigned long st_blksize; - - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long __pad4; /* future possible st_blocks high bits */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ - - unsigned long __unused1; - unsigned long __unused2; -}; -#else -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned long st_rdev; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned long long st_dev; - unsigned char __pad0[4]; - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - unsigned char __pad3[4]; - - long long st_size; - unsigned long st_blksize; - - unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long long st_ino; -}; - -#define STAT_HAVE_NSEC 1 -#endif - -#endif /* __ASM_SH_STAT_H */ diff --git a/include/asm-sh/statfs.h b/include/asm-sh/statfs.h deleted file mode 100644 index 9202a023328f..000000000000 --- a/include/asm-sh/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_STATFS_H -#define __ASM_SH_STATFS_H - -#include - -#endif /* __ASM_SH_STATFS_H */ diff --git a/include/asm-sh/string.h b/include/asm-sh/string.h deleted file mode 100644 index 8c1ea21dc0ae..000000000000 --- a/include/asm-sh/string.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifdef CONFIG_SUPERH32 -# include "string_32.h" -#else -# include "string_64.h" -#endif diff --git a/include/asm-sh/string_32.h b/include/asm-sh/string_32.h deleted file mode 100644 index 55f8db6bc1d7..000000000000 --- a/include/asm-sh/string_32.h +++ /dev/null @@ -1,131 +0,0 @@ -#ifndef __ASM_SH_STRING_H -#define __ASM_SH_STRING_H - -#ifdef __KERNEL__ - -/* - * Copyright (C) 1999 Niibe Yutaka - * But consider these trivial functions to be public domain. - */ - -#define __HAVE_ARCH_STRCPY -static inline char *strcpy(char *__dest, const char *__src) -{ - register char *__xdest = __dest; - unsigned long __dummy; - - __asm__ __volatile__("1:\n\t" - "mov.b @%1+, %2\n\t" - "mov.b %2, @%0\n\t" - "cmp/eq #0, %2\n\t" - "bf/s 1b\n\t" - " add #1, %0\n\t" - : "=r" (__dest), "=r" (__src), "=&z" (__dummy) - : "0" (__dest), "1" (__src) - : "memory", "t"); - - return __xdest; -} - -#define __HAVE_ARCH_STRNCPY -static inline char *strncpy(char *__dest, const char *__src, size_t __n) -{ - register char *__xdest = __dest; - unsigned long __dummy; - - if (__n == 0) - return __xdest; - - __asm__ __volatile__( - "1:\n" - "mov.b @%1+, %2\n\t" - "mov.b %2, @%0\n\t" - "cmp/eq #0, %2\n\t" - "bt/s 2f\n\t" - " cmp/eq %5,%1\n\t" - "bf/s 1b\n\t" - " add #1, %0\n" - "2:" - : "=r" (__dest), "=r" (__src), "=&z" (__dummy) - : "0" (__dest), "1" (__src), "r" (__src+__n) - : "memory", "t"); - - return __xdest; -} - -#define __HAVE_ARCH_STRCMP -static inline int strcmp(const char *__cs, const char *__ct) -{ - register int __res; - unsigned long __dummy; - - __asm__ __volatile__( - "mov.b @%1+, %3\n" - "1:\n\t" - "mov.b @%0+, %2\n\t" - "cmp/eq #0, %3\n\t" - "bt 2f\n\t" - "cmp/eq %2, %3\n\t" - "bt/s 1b\n\t" - " mov.b @%1+, %3\n\t" - "add #-2, %1\n\t" - "mov.b @%1, %3\n\t" - "sub %3, %2\n" - "2:" - : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) - : "0" (__cs), "1" (__ct) - : "t"); - - return __res; -} - -#define __HAVE_ARCH_STRNCMP -static inline int strncmp(const char *__cs, const char *__ct, size_t __n) -{ - register int __res; - unsigned long __dummy; - - if (__n == 0) - return 0; - - __asm__ __volatile__( - "mov.b @%1+, %3\n" - "1:\n\t" - "mov.b @%0+, %2\n\t" - "cmp/eq %6, %0\n\t" - "bt/s 2f\n\t" - " cmp/eq #0, %3\n\t" - "bt/s 3f\n\t" - " cmp/eq %3, %2\n\t" - "bt/s 1b\n\t" - " mov.b @%1+, %3\n\t" - "add #-2, %1\n\t" - "mov.b @%1, %3\n" - "2:\n\t" - "sub %3, %2\n" - "3:" - :"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) - : "0" (__cs), "1" (__ct), "r" (__cs+__n) - : "t"); - - return __res; -} - -#define __HAVE_ARCH_MEMSET -extern void *memset(void *__s, int __c, size_t __count); - -#define __HAVE_ARCH_MEMCPY -extern void *memcpy(void *__to, __const__ void *__from, size_t __n); - -#define __HAVE_ARCH_MEMMOVE -extern void *memmove(void *__dest, __const__ void *__src, size_t __n); - -#define __HAVE_ARCH_MEMCHR -extern void *memchr(const void *__s, int __c, size_t __n); - -#define __HAVE_ARCH_STRLEN -extern size_t strlen(const char *); - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_STRING_H */ diff --git a/include/asm-sh/string_64.h b/include/asm-sh/string_64.h deleted file mode 100644 index aa1fef229c78..000000000000 --- a/include/asm-sh/string_64.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_SH_STRING_64_H -#define __ASM_SH_STRING_64_H - -/* - * include/asm-sh/string_64.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#define __HAVE_ARCH_MEMCPY -extern void *memcpy(void *dest, const void *src, size_t count); - -#endif /* __ASM_SH_STRING_64_H */ diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h deleted file mode 100644 index 056d68cd2108..000000000000 --- a/include/asm-sh/system.h +++ /dev/null @@ -1,190 +0,0 @@ -#ifndef __ASM_SH_SYSTEM_H -#define __ASM_SH_SYSTEM_H - -/* - * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima - * Copyright (C) 2002 Paul Mundt - */ - -#include -#include -#include -#include -#include - -#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */ - -#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) -#define __icbi() \ -{ \ - unsigned long __addr; \ - __addr = 0xa8000000; \ - __asm__ __volatile__( \ - "icbi %0\n\t" \ - : /* no output */ \ - : "m" (__m(__addr))); \ -} -#endif - -/* - * A brief note on ctrl_barrier(), the control register write barrier. - * - * Legacy SH cores typically require a sequence of 8 nops after - * modification of a control register in order for the changes to take - * effect. On newer cores (like the sh4a and sh5) this is accomplished - * with icbi. - * - * Also note that on sh4a in the icbi case we can forego a synco for the - * write barrier, as it's not necessary for control registers. - * - * Historically we have only done this type of barrier for the MMUCR, but - * it's also necessary for the CCR, so we make it generic here instead. - */ -#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) -#define mb() __asm__ __volatile__ ("synco": : :"memory") -#define rmb() mb() -#define wmb() __asm__ __volatile__ ("synco": : :"memory") -#define ctrl_barrier() __icbi() -#define read_barrier_depends() do { } while(0) -#else -#define mb() __asm__ __volatile__ ("": : :"memory") -#define rmb() mb() -#define wmb() __asm__ __volatile__ ("": : :"memory") -#define ctrl_barrier() __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop") -#define read_barrier_depends() do { } while(0) -#endif - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) -#endif - -#define set_mb(var, value) do { (void)xchg(&var, value); } while (0) - -#ifdef CONFIG_GUSA_RB -#include -#else -#include -#endif - -extern void __xchg_called_with_bad_pointer(void); - -#define __xchg(ptr, x, size) \ -({ \ - unsigned long __xchg__res; \ - volatile void *__xchg_ptr = (ptr); \ - switch (size) { \ - case 4: \ - __xchg__res = xchg_u32(__xchg_ptr, x); \ - break; \ - case 1: \ - __xchg__res = xchg_u8(__xchg_ptr, x); \ - break; \ - default: \ - __xchg_called_with_bad_pointer(); \ - __xchg__res = x; \ - break; \ - } \ - \ - __xchg__res; \ -}) - -#define xchg(ptr,x) \ - ((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr)))) - -/* This function doesn't exist, so you'll get a linker error - * if something tries to do an invalid cmpxchg(). */ -extern void __cmpxchg_called_with_bad_pointer(void); - -#define __HAVE_ARCH_CMPXCHG 1 - -static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old, - unsigned long new, int size) -{ - switch (size) { - case 4: - return __cmpxchg_u32(ptr, old, new); - } - __cmpxchg_called_with_bad_pointer(); - return old; -} - -#define cmpxchg(ptr,o,n) \ - ({ \ - __typeof__(*(ptr)) _o_ = (o); \ - __typeof__(*(ptr)) _n_ = (n); \ - (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ - (unsigned long)_n_, sizeof(*(ptr))); \ - }) - -extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn)); - -extern void *set_exception_table_vec(unsigned int vec, void *handler); - -static inline void *set_exception_table_evt(unsigned int evt, void *handler) -{ - return set_exception_table_vec(evt >> 5, handler); -} - -/* - * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks. - */ -#ifdef CONFIG_CPU_SH2A -extern unsigned int instruction_size(unsigned int insn); -#elif defined(CONFIG_SUPERH32) -#define instruction_size(insn) (2) -#else -#define instruction_size(insn) (4) -#endif - -extern unsigned long cached_to_uncached; - -extern struct dentry *sh_debugfs_root; - -void per_cpu_trap_init(void); - -asmlinkage void break_point_trap(void); - -#ifdef CONFIG_SUPERH32 -#define BUILD_TRAP_HANDLER(name) \ -asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5, \ - unsigned long r6, unsigned long r7, \ - struct pt_regs __regs) - -#define TRAP_HANDLER_DECL \ - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); \ - unsigned int vec = regs->tra; \ - (void)vec; -#else -#define BUILD_TRAP_HANDLER(name) \ -asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs) -#define TRAP_HANDLER_DECL -#endif - -BUILD_TRAP_HANDLER(address_error); -BUILD_TRAP_HANDLER(debug); -BUILD_TRAP_HANDLER(bug); -BUILD_TRAP_HANDLER(fpu_error); -BUILD_TRAP_HANDLER(fpu_state_restore); - -#define arch_align_stack(x) (x) - -struct mem_access { - unsigned long (*from)(void *dst, const void *src, unsigned long cnt); - unsigned long (*to)(void *dst, const void *src, unsigned long cnt); -}; - -#ifdef CONFIG_SUPERH32 -# include "system_32.h" -#else -# include "system_64.h" -#endif - -#endif diff --git a/include/asm-sh/system_32.h b/include/asm-sh/system_32.h deleted file mode 100644 index f11bcf0855ed..000000000000 --- a/include/asm-sh/system_32.h +++ /dev/null @@ -1,102 +0,0 @@ -#ifndef __ASM_SH_SYSTEM_32_H -#define __ASM_SH_SYSTEM_32_H - -#include - -struct task_struct *__switch_to(struct task_struct *prev, - struct task_struct *next); - -/* - * switch_to() should switch tasks to task nr n, first - */ -#define switch_to(prev, next, last) \ -do { \ - register u32 *__ts1 __asm__ ("r1") = (u32 *)&prev->thread.sp; \ - register u32 *__ts2 __asm__ ("r2") = (u32 *)&prev->thread.pc; \ - register u32 *__ts4 __asm__ ("r4") = (u32 *)prev; \ - register u32 *__ts5 __asm__ ("r5") = (u32 *)next; \ - register u32 *__ts6 __asm__ ("r6") = (u32 *)&next->thread.sp; \ - register u32 __ts7 __asm__ ("r7") = next->thread.pc; \ - struct task_struct *__last; \ - \ - __asm__ __volatile__ ( \ - ".balign 4\n\t" \ - "stc.l gbr, @-r15\n\t" \ - "sts.l pr, @-r15\n\t" \ - "mov.l r8, @-r15\n\t" \ - "mov.l r9, @-r15\n\t" \ - "mov.l r10, @-r15\n\t" \ - "mov.l r11, @-r15\n\t" \ - "mov.l r12, @-r15\n\t" \ - "mov.l r13, @-r15\n\t" \ - "mov.l r14, @-r15\n\t" \ - "mov.l r15, @r1\t! save SP\n\t" \ - "mov.l @r6, r15\t! change to new stack\n\t" \ - "mova 1f, %0\n\t" \ - "mov.l %0, @r2\t! save PC\n\t" \ - "mov.l 2f, %0\n\t" \ - "jmp @%0\t! call __switch_to\n\t" \ - " lds r7, pr\t! with return to new PC\n\t" \ - ".balign 4\n" \ - "2:\n\t" \ - ".long __switch_to\n" \ - "1:\n\t" \ - "mov.l @r15+, r14\n\t" \ - "mov.l @r15+, r13\n\t" \ - "mov.l @r15+, r12\n\t" \ - "mov.l @r15+, r11\n\t" \ - "mov.l @r15+, r10\n\t" \ - "mov.l @r15+, r9\n\t" \ - "mov.l @r15+, r8\n\t" \ - "lds.l @r15+, pr\n\t" \ - "ldc.l @r15+, gbr\n\t" \ - : "=z" (__last) \ - : "r" (__ts1), "r" (__ts2), "r" (__ts4), \ - "r" (__ts5), "r" (__ts6), "r" (__ts7) \ - : "r3", "t"); \ - \ - last = __last; \ -} while (0) - -#define __uses_jump_to_uncached __attribute__ ((__section__ (".uncached.text"))) - -/* - * Jump to uncached area. - * When handling TLB or caches, we need to do it from an uncached area. - */ -#define jump_to_uncached() \ -do { \ - unsigned long __dummy; \ - \ - __asm__ __volatile__( \ - "mova 1f, %0\n\t" \ - "add %1, %0\n\t" \ - "jmp @%0\n\t" \ - " nop\n\t" \ - ".balign 4\n" \ - "1:" \ - : "=&z" (__dummy) \ - : "r" (cached_to_uncached)); \ -} while (0) - -/* - * Back to cached area. - */ -#define back_to_cached() \ -do { \ - unsigned long __dummy; \ - ctrl_barrier(); \ - __asm__ __volatile__( \ - "mov.l 1f, %0\n\t" \ - "jmp @%0\n\t" \ - " nop\n\t" \ - ".balign 4\n" \ - "1: .long 2f\n" \ - "2:" \ - : "=&r" (__dummy)); \ -} while (0) - -int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs, - struct mem_access *ma); - -#endif /* __ASM_SH_SYSTEM_32_H */ diff --git a/include/asm-sh/system_64.h b/include/asm-sh/system_64.h deleted file mode 100644 index 943acf5ea07c..000000000000 --- a/include/asm-sh/system_64.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef __ASM_SH_SYSTEM_64_H -#define __ASM_SH_SYSTEM_64_H - -/* - * include/asm-sh/system_64.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * Copyright (C) 2004 Richard Curnow - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include - -/* - * switch_to() should switch tasks to task nr n, first - */ -struct task_struct *sh64_switch_to(struct task_struct *prev, - struct thread_struct *prev_thread, - struct task_struct *next, - struct thread_struct *next_thread); - -#define switch_to(prev,next,last) \ -do { \ - if (last_task_used_math != next) { \ - struct pt_regs *regs = next->thread.uregs; \ - if (regs) regs->sr |= SR_FD; \ - } \ - last = sh64_switch_to(prev, &prev->thread, next, \ - &next->thread); \ -} while (0) - -#define __uses_jump_to_uncached - -#define jump_to_uncached() do { } while (0) -#define back_to_cached() do { } while (0) - -#endif /* __ASM_SH_SYSTEM_64_H */ diff --git a/include/asm-sh/systemh7751.h b/include/asm-sh/systemh7751.h deleted file mode 100644 index 4161122c84ef..000000000000 --- a/include/asm-sh/systemh7751.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H -#define __ASM_SH_SYSTEMH_7751SYSTEMH_H - -/* - * linux/include/asm-sh/systemh/7751systemh.h - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SystemH support - - * Modified for 7751 SystemH by - * Jonathan Short, 2002. - */ - -/* Box specific addresses. */ - -#define PA_ROM 0x00000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_FROM 0x01000000 /* EPROM */ -#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_EXT1 0x04000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_EXT2 0x08000000 -#define PA_EXT2_SIZE 0x04000000 -#define PA_SDRAM 0x0c000000 -#define PA_SDRAM_SIZE 0x04000000 - -#define PA_EXT4 0x12000000 -#define PA_EXT4_SIZE 0x02000000 -#define PA_EXT5 0x14000000 -#define PA_EXT5_SIZE 0x04000000 -#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ - -#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */ -#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */ -#define PA_LED 0xba000000 /* LED */ -#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ - -#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ -#define MRSHPC_MODE (PA_MRSHPC + 4) -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) - -#define BCR_ILCRA (PA_BCR + 0) -#define BCR_ILCRB (PA_BCR + 2) -#define BCR_ILCRC (PA_BCR + 4) -#define BCR_ILCRD (PA_BCR + 6) -#define BCR_ILCRE (PA_BCR + 8) -#define BCR_ILCRF (PA_BCR + 10) -#define BCR_ILCRG (PA_BCR + 12) - -#define IRQ_79C973 13 - -#define __IO_PREFIX sh7751systemh -#include - -#endif /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */ diff --git a/include/asm-sh/termbits.h b/include/asm-sh/termbits.h deleted file mode 100644 index 77db116948cf..000000000000 --- a/include/asm-sh/termbits.h +++ /dev/null @@ -1,198 +0,0 @@ -#ifndef __ASM_SH_TERMBITS_H -#define __ASM_SH_TERMBITS_H - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ASM_SH_TERMBITS_H */ diff --git a/include/asm-sh/termios.h b/include/asm-sh/termios.h deleted file mode 100644 index 0a8c793c76f2..000000000000 --- a/include/asm-sh/termios.h +++ /dev/null @@ -1,90 +0,0 @@ -#ifndef __ASM_SH_TERMIOS_H -#define __ASM_SH_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_TERMIOS_H */ diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h deleted file mode 100644 index eeb4c747119e..000000000000 --- a/include/asm-sh/thread_info.h +++ /dev/null @@ -1,141 +0,0 @@ -#ifndef __ASM_SH_THREAD_INFO_H -#define __ASM_SH_THREAD_INFO_H - -/* SuperH version - * Copyright (C) 2002 Niibe Yutaka - * - * The copyright of original i386 version is: - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ -#ifdef __KERNEL__ -#include - -#ifndef __ASSEMBLY__ -#include - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - __u32 cpu; - int preempt_count; /* 0 => preemptable, <0 => BUG */ - mm_segment_t addr_limit; /* thread address space */ - struct restart_block restart_block; - unsigned long previous_sp; /* sp of previous stack in case - of nested IRQ stacks */ - __u8 supervisor_stack[0]; -}; - -#endif - -#define PREEMPT_ACTIVE 0x10000000 - -#if defined(CONFIG_4KSTACKS) -#define THREAD_SIZE_ORDER (0) -#elif defined(CONFIG_PAGE_SIZE_4KB) -#define THREAD_SIZE_ORDER (1) -#elif defined(CONFIG_PAGE_SIZE_8KB) -#define THREAD_SIZE_ORDER (1) -#elif defined(CONFIG_PAGE_SIZE_16KB) -#define THREAD_SIZE_ORDER (0) -#elif defined(CONFIG_PAGE_SIZE_64KB) -#define THREAD_SIZE_ORDER (0) -#else -#error "Unknown thread size" -#endif - -#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) -#define STACK_WARN (THREAD_SIZE >> 3) - -/* - * macros/functions for gaining access to the thread information structure - */ -#ifndef __ASSEMBLY__ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -/* how to get the current stack pointer from C */ -register unsigned long current_stack_pointer asm("r15") __used; - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; -#if defined(CONFIG_SUPERH64) - __asm__ __volatile__ ("getcon cr17, %0" : "=r" (ti)); -#elif defined(CONFIG_CPU_HAS_SR_RB) - __asm__ __volatile__ ("stc r7_bank, %0" : "=r" (ti)); -#else - unsigned long __dummy; - - __asm__ __volatile__ ( - "mov r15, %0\n\t" - "and %1, %0\n\t" - : "=&r" (ti), "=r" (__dummy) - : "1" (~(THREAD_SIZE - 1)) - : "memory"); -#endif - - return ti; -} - -#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR - -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define alloc_thread_info(ti) kzalloc(THREAD_SIZE, GFP_KERNEL) -#else -#define alloc_thread_info(ti) kmalloc(THREAD_SIZE, GFP_KERNEL) -#endif -#define free_thread_info(ti) kfree(ti) - -#endif /* __ASSEMBLY__ */ - -/* - * thread information flags - * - these are process state flags that various assembly files may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_RESTORE_SIGMASK 3 /* restore signal mask in do_signal() */ -#define TIF_SINGLESTEP 4 /* singlestepping active */ -#define TIF_SYSCALL_AUDIT 5 -#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ -#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 18 -#define TIF_FREEZE 19 - -#define _TIF_SYSCALL_TRACE (1< -#include -#include - -struct sys_timer_ops { - int (*init)(void); - int (*start)(void); - int (*stop)(void); - cycle_t (*read)(void); -#ifndef CONFIG_GENERIC_TIME - unsigned long (*get_offset)(void); -#endif -}; - -struct sys_timer { - const char *name; - - struct sys_device dev; - struct sys_timer_ops *ops; -}; - -#define TICK_SIZE (tick_nsec / 1000) - -extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer; -extern struct sys_timer *sys_timer; - -#ifndef CONFIG_GENERIC_TIME -static inline unsigned long get_timer_offset(void) -{ - return sys_timer->ops->get_offset(); -} -#endif - -/* arch/sh/kernel/timers/timer.c */ -struct sys_timer *get_sys_timer(void); - -/* arch/sh/kernel/time.c */ -void handle_timer_tick(void); -extern unsigned long sh_hpt_frequency; - -#endif /* __ASM_SH_TIMER_H */ diff --git a/include/asm-sh/timex.h b/include/asm-sh/timex.h deleted file mode 100644 index a873e24113cf..000000000000 --- a/include/asm-sh/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-sh/timex.h - * - * sh architecture timex specifications - */ -#ifndef __ASM_SH_TIMEX_H -#define __ASM_SH_TIMEX_H - -#define CLOCK_TICK_RATE (CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */ - -typedef unsigned long long cycles_t; - -static __inline__ cycles_t get_cycles (void) -{ - return 0; -} - -#endif /* __ASM_SH_TIMEX_H */ diff --git a/include/asm-sh/titan.h b/include/asm-sh/titan.h deleted file mode 100644 index 03f3583c8918..000000000000 --- a/include/asm-sh/titan.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Platform defintions for Titan - */ -#ifndef _ASM_SH_TITAN_H -#define _ASM_SH_TITAN_H - -#define __IO_PREFIX titan -#include - -/* IRQ assignments */ -#define TITAN_IRQ_WAN 2 /* eth0 (WAN) */ -#define TITAN_IRQ_LAN 5 /* eth1 (LAN) */ -#define TITAN_IRQ_MPCIA 8 /* mPCI A */ -#define TITAN_IRQ_MPCIB 11 /* mPCI B */ -#define TITAN_IRQ_USB 11 /* USB */ - -#endif /* __ASM_SH_TITAN_H */ diff --git a/include/asm-sh/tlb.h b/include/asm-sh/tlb.h deleted file mode 100644 index 88ff1ae8a6b8..000000000000 --- a/include/asm-sh/tlb.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __ASM_SH_TLB_H -#define __ASM_SH_TLB_H - -#ifdef CONFIG_SUPERH64 -# include "tlb_64.h" -#endif - -#ifndef __ASSEMBLY__ - -#define tlb_start_vma(tlb, vma) \ - flush_cache_range(vma, vma->vm_start, vma->vm_end) - -#define tlb_end_vma(tlb, vma) \ - flush_tlb_range(vma, vma->vm_start, vma->vm_end) - -#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) - -/* - * Flush whole TLBs for MM - */ -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -#include -#include - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH_TLB_H */ diff --git a/include/asm-sh/tlb_64.h b/include/asm-sh/tlb_64.h deleted file mode 100644 index 0a96f3af69e3..000000000000 --- a/include/asm-sh/tlb_64.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * include/asm-sh/tlb_64.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_TLB_64_H -#define __ASM_SH_TLB_64_H - -/* ITLB defines */ -#define ITLB_FIXED 0x00000000 /* First fixed ITLB, see head.S */ -#define ITLB_LAST_VAR_UNRESTRICTED 0x000003F0 /* Last ITLB */ - -/* DTLB defines */ -#define DTLB_FIXED 0x00800000 /* First fixed DTLB, see head.S */ -#define DTLB_LAST_VAR_UNRESTRICTED 0x008003F0 /* Last DTLB */ - -#ifndef __ASSEMBLY__ - -/** - * for_each_dtlb_entry - * - * @tlb: TLB entry - * - * Iterate over free (non-wired) DTLB entries - */ -#define for_each_dtlb_entry(tlb) \ - for (tlb = cpu_data->dtlb.first; \ - tlb <= cpu_data->dtlb.last; \ - tlb += cpu_data->dtlb.step) - -/** - * for_each_itlb_entry - * - * @tlb: TLB entry - * - * Iterate over free (non-wired) ITLB entries - */ -#define for_each_itlb_entry(tlb) \ - for (tlb = cpu_data->itlb.first; \ - tlb <= cpu_data->itlb.last; \ - tlb += cpu_data->itlb.step) - -/** - * __flush_tlb_slot - * - * @slot: Address of TLB slot. - * - * Flushes TLB slot @slot. - */ -static inline void __flush_tlb_slot(unsigned long long slot) -{ - __asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot)); -} - -#ifdef CONFIG_MMU -/* arch/sh64/mm/tlb.c */ -int sh64_tlb_init(void); -unsigned long long sh64_next_free_dtlb_entry(void); -unsigned long long sh64_get_wired_dtlb_entry(void); -int sh64_put_wired_dtlb_entry(unsigned long long entry); -void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr, - unsigned long asid, unsigned long paddr); -void sh64_teardown_tlb_slot(unsigned long long config_addr); -#else -#define sh64_tlb_init() do { } while (0) -#define sh64_next_free_dtlb_entry() (0) -#define sh64_get_wired_dtlb_entry() (0) -#define sh64_put_wired_dtlb_entry(entry) do { } while (0) -#define sh64_setup_tlb_slot(conf, virt, asid, phys) do { } while (0) -#define sh64_teardown_tlb_slot(addr) do { } while (0) -#endif /* CONFIG_MMU */ -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH_TLB_64_H */ diff --git a/include/asm-sh/tlbflush.h b/include/asm-sh/tlbflush.h deleted file mode 100644 index e0ac97221ae6..000000000000 --- a/include/asm-sh/tlbflush.h +++ /dev/null @@ -1,49 +0,0 @@ -#ifndef __ASM_SH_TLBFLUSH_H -#define __ASM_SH_TLBFLUSH_H - -/* - * TLB flushing: - * - * - flush_tlb_all() flushes all processes TLBs - * - flush_tlb_mm(mm) flushes the specified mm context TLB's - * - flush_tlb_page(vma, vmaddr) flushes one page - * - flush_tlb_range(vma, start, end) flushes a range of pages - * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages - */ -extern void local_flush_tlb_all(void); -extern void local_flush_tlb_mm(struct mm_struct *mm); -extern void local_flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, - unsigned long end); -extern void local_flush_tlb_page(struct vm_area_struct *vma, - unsigned long page); -extern void local_flush_tlb_kernel_range(unsigned long start, - unsigned long end); -extern void local_flush_tlb_one(unsigned long asid, unsigned long page); - -#ifdef CONFIG_SMP - -extern void flush_tlb_all(void); -extern void flush_tlb_mm(struct mm_struct *mm); -extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page); -extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); -extern void flush_tlb_one(unsigned long asid, unsigned long page); - -#else - -#define flush_tlb_all() local_flush_tlb_all() -#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) -#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page) -#define flush_tlb_one(asid, page) local_flush_tlb_one(asid, page) - -#define flush_tlb_range(vma, start, end) \ - local_flush_tlb_range(vma, start, end) - -#define flush_tlb_kernel_range(start, end) \ - local_flush_tlb_kernel_range(start, end) - -#endif /* CONFIG_SMP */ - -#endif /* __ASM_SH_TLBFLUSH_H */ diff --git a/include/asm-sh/topology.h b/include/asm-sh/topology.h deleted file mode 100644 index 95f0085e098a..000000000000 --- a/include/asm-sh/topology.h +++ /dev/null @@ -1,47 +0,0 @@ -#ifndef _ASM_SH_TOPOLOGY_H -#define _ASM_SH_TOPOLOGY_H - -#ifdef CONFIG_NUMA - -/* sched_domains SD_NODE_INIT for sh machines */ -#define SD_NODE_INIT (struct sched_domain) { \ - .span = CPU_MASK_NONE, \ - .parent = NULL, \ - .child = NULL, \ - .groups = NULL, \ - .min_interval = 8, \ - .max_interval = 32, \ - .busy_factor = 32, \ - .imbalance_pct = 125, \ - .cache_nice_tries = 2, \ - .busy_idx = 3, \ - .idle_idx = 2, \ - .newidle_idx = 2, \ - .wake_idx = 1, \ - .forkexec_idx = 1, \ - .flags = SD_LOAD_BALANCE \ - | SD_BALANCE_FORK \ - | SD_BALANCE_EXEC \ - | SD_SERIALIZE \ - | SD_WAKE_BALANCE, \ - .last_balance = jiffies, \ - .balance_interval = 1, \ - .nr_balance_failed = 0, \ -} - -#define cpu_to_node(cpu) ((void)(cpu),0) -#define parent_node(node) ((void)(node),0) - -#define node_to_cpumask(node) ((void)node, cpu_online_map) -#define node_to_first_cpu(node) ((void)(node),0) - -#define pcibus_to_node(bus) ((void)(bus), -1) -#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ - CPU_MASK_ALL : \ - node_to_cpumask(pcibus_to_node(bus)) \ - ) -#endif - -#include - -#endif /* _ASM_SH_TOPOLOGY_H */ diff --git a/include/asm-sh/types.h b/include/asm-sh/types.h deleted file mode 100644 index beea4e6f8dfd..000000000000 --- a/include/asm-sh/types.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef __ASM_SH_TYPES_H -#define __ASM_SH_TYPES_H - -#include - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; - -#ifdef CONFIG_SUPERH32 -typedef u16 opcode_t; -#else -typedef u32 opcode_t; -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_TYPES_H */ diff --git a/include/asm-sh/uaccess.h b/include/asm-sh/uaccess.h deleted file mode 100644 index 45c2c9b2993d..000000000000 --- a/include/asm-sh/uaccess.h +++ /dev/null @@ -1,256 +0,0 @@ -#ifndef __ASM_SH_UACCESS_H -#define __ASM_SH_UACCESS_H - -#include -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -#define __addr_ok(addr) \ - ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) - -/* - * __access_ok: Check if address with size is OK or not. - * - * Uhhuh, this needs 33-bit arithmetic. We have a carry.. - * - * sum := addr + size; carry? --> flag = true; - * if (sum >= addr_limit) flag = true; - */ -#define __access_ok(addr, size) \ - (__addr_ok((addr) + (size))) -#define access_ok(type, addr, size) \ - (__chk_user_ptr(addr), \ - __access_ok((unsigned long __force)(addr), (size))) - -/* - * Uh, these should become the main single-value transfer routines ... - * They automatically use the right size if we just have the right - * pointer type ... - * - * As SuperH uses the same address space for kernel and user data, we - * can just do these as direct assignments. - * - * Careful to not - * (a) re-use the arguments for side effects (sizeof is ok) - * (b) require any knowledge of processes at this stage - */ -#define put_user(x,ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) -#define get_user(x,ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the user has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x,ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) -#define __get_user(x,ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct __user *)(x)) - -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - const __typeof__(*(ptr)) *__gu_addr = (ptr); \ - if (likely(access_ok(VERIFY_READ, __gu_addr, (size)))) \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \ - __put_user_size((x), __pu_addr, (size), \ - __pu_err); \ - __pu_err; \ -}) - -#ifdef CONFIG_SUPERH32 -# include "uaccess_32.h" -#else -# include "uaccess_64.h" -#endif - -/* Generic arbitrary sized copy. */ -/* Return the number of bytes NOT copied */ -__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); - -static __always_inline unsigned long -__copy_from_user(void *to, const void __user *from, unsigned long n) -{ - return __copy_user(to, (__force void *)from, n); -} - -static __always_inline unsigned long __must_check -__copy_to_user(void __user *to, const void *from, unsigned long n) -{ - return __copy_user((__force void *)to, from, n); -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -/* - * Clear the area and return remaining number of bytes - * (on failure. Usually it's 0.) - */ -__kernel_size_t __clear_user(void *addr, __kernel_size_t size); - -#define clear_user(addr,n) \ -({ \ - void __user * __cl_addr = (addr); \ - unsigned long __cl_size = (n); \ - \ - if (__cl_size && access_ok(VERIFY_WRITE, \ - ((unsigned long)(__cl_addr)), __cl_size)) \ - __cl_size = __clear_user(__cl_addr, __cl_size); \ - \ - __cl_size; \ -}) - -/** - * strncpy_from_user: - Copy a NUL terminated string from userspace. - * @dst: Destination address, in kernel space. This buffer must be at - * least @count bytes long. - * @src: Source address, in user space. - * @count: Maximum number of bytes to copy, including the trailing NUL. - * - * Copies a NUL-terminated string from userspace to kernel space. - * - * On success, returns the length of the string (not including the trailing - * NUL). - * - * If access to userspace fails, returns -EFAULT (some data may have been - * copied). - * - * If @count is smaller than the length of the string, copies @count bytes - * and returns @count. - */ -#define strncpy_from_user(dest,src,count) \ -({ \ - unsigned long __sfu_src = (unsigned long)(src); \ - int __sfu_count = (int)(count); \ - long __sfu_res = -EFAULT; \ - \ - if (__access_ok(__sfu_src, __sfu_count)) \ - __sfu_res = __strncpy_from_user((unsigned long)(dest), \ - __sfu_src, __sfu_count); \ - \ - __sfu_res; \ -}) - -static inline unsigned long -copy_from_user(void *to, const void __user *from, unsigned long n) -{ - unsigned long __copy_from = (unsigned long) from; - __kernel_size_t __copy_size = (__kernel_size_t) n; - - if (__copy_size && __access_ok(__copy_from, __copy_size)) - return __copy_user(to, from, __copy_size); - - return __copy_size; -} - -static inline unsigned long -copy_to_user(void __user *to, const void *from, unsigned long n) -{ - unsigned long __copy_to = (unsigned long) to; - __kernel_size_t __copy_size = (__kernel_size_t) n; - - if (__copy_size && __access_ok(__copy_to, __copy_size)) - return __copy_user(to, from, __copy_size); - - return __copy_size; -} - -/** - * strnlen_user: - Get the size of a string in user space. - * @s: The string to measure. - * @n: The maximum valid length - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * If the string is too long, returns a value greater than @n. - */ -static inline long strnlen_user(const char __user *s, long n) -{ - if (!__addr_ok(s)) - return 0; - else - return __strnlen_user(s, n); -} - -/** - * strlen_user: - Get the size of a string in user space. - * @str: The string to measure. - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * - * If there is a limit on the length of a valid string, you may wish to - * consider using strnlen_user() instead. - */ -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ -struct exception_table_entry { - unsigned long insn, fixup; -}; - -#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU) -#define ARCH_HAS_SEARCH_EXTABLE -#endif - -int fixup_exception(struct pt_regs *regs); -/* Returns 0 if exception not found and fixup.unit otherwise. */ -unsigned long search_exception_table(unsigned long addr); -const struct exception_table_entry *search_exception_tables(unsigned long addr); - - -#endif /* __ASM_SH_UACCESS_H */ diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h deleted file mode 100644 index 892fd6dea9db..000000000000 --- a/include/asm-sh/uaccess_32.h +++ /dev/null @@ -1,249 +0,0 @@ -/* - * User space memory access functions - * - * Copyright (C) 1999, 2002 Niibe Yutaka - * Copyright (C) 2003 - 2008 Paul Mundt - * - * Based on: - * MIPS implementation version 1.15 by - * Copyright (C) 1996, 1997, 1998 by Ralf Baechle - * and i386 version. - */ -#ifndef __ASM_SH_UACCESS_32_H -#define __ASM_SH_UACCESS_32_H - -#define __get_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - __get_user_asm(x, ptr, retval, "b"); \ - break; \ - case 2: \ - __get_user_asm(x, ptr, retval, "w"); \ - break; \ - case 4: \ - __get_user_asm(x, ptr, retval, "l"); \ - break; \ - default: \ - __get_user_unknown(); \ - break; \ - } \ -} while (0) - -#ifdef CONFIG_MMU -#define __get_user_asm(x, addr, err, insn) \ -({ \ -__asm__ __volatile__( \ - "1:\n\t" \ - "mov." insn " %2, %1\n\t" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3:\n\t" \ - "mov #0, %1\n\t" \ - "mov.l 4f, %0\n\t" \ - "jmp @%0\n\t" \ - " mov %3, %0\n\t" \ - ".balign 4\n" \ - "4: .long 2b\n\t" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 3b\n\t" \ - ".previous" \ - :"=&r" (err), "=&r" (x) \ - :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); }) -#else -#define __get_user_asm(x, addr, err, insn) \ -do { \ - __asm__ __volatile__ ( \ - "mov." insn " %1, %0\n\t" \ - : "=&r" (x) \ - : "m" (__m(addr)) \ - ); \ -} while (0) -#endif /* CONFIG_MMU */ - -extern void __get_user_unknown(void); - -#define __put_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - __put_user_asm(x, ptr, retval, "b"); \ - break; \ - case 2: \ - __put_user_asm(x, ptr, retval, "w"); \ - break; \ - case 4: \ - __put_user_asm((u32)x, ptr, \ - retval, "l"); \ - break; \ - case 8: \ - __put_user_u64(x, ptr, retval); \ - break; \ - default: \ - __put_user_unknown(); \ - } \ -} while (0) - -#ifdef CONFIG_MMU -#define __put_user_asm(x, addr, err, insn) \ -do { \ - __asm__ __volatile__ ( \ - "1:\n\t" \ - "mov." insn " %1, %2\n\t" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3:\n\t" \ - "mov.l 4f, %0\n\t" \ - "jmp @%0\n\t" \ - " mov %3, %0\n\t" \ - ".balign 4\n" \ - "4: .long 2b\n\t" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 3b\n\t" \ - ".previous" \ - : "=&r" (err) \ - : "r" (x), "m" (__m(addr)), "i" (-EFAULT), \ - "0" (err) \ - : "memory" \ - ); \ -} while (0) -#else -#define __put_user_asm(x, addr, err, insn) \ -do { \ - __asm__ __volatile__ ( \ - "mov." insn " %0, %1\n\t" \ - : /* no outputs */ \ - : "r" (x), "m" (__m(addr)) \ - : "memory" \ - ); \ -} while (0) -#endif /* CONFIG_MMU */ - -#if defined(CONFIG_CPU_LITTLE_ENDIAN) -#define __put_user_u64(val,addr,retval) \ -({ \ -__asm__ __volatile__( \ - "1:\n\t" \ - "mov.l %R1,%2\n\t" \ - "mov.l %S1,%T2\n\t" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3:\n\t" \ - "mov.l 4f,%0\n\t" \ - "jmp @%0\n\t" \ - " mov %3,%0\n\t" \ - ".balign 4\n" \ - "4: .long 2b\n\t" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 3b\n\t" \ - ".previous" \ - : "=r" (retval) \ - : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \ - : "memory"); }) -#else -#define __put_user_u64(val,addr,retval) \ -({ \ -__asm__ __volatile__( \ - "1:\n\t" \ - "mov.l %S1,%2\n\t" \ - "mov.l %R1,%T2\n\t" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3:\n\t" \ - "mov.l 4f,%0\n\t" \ - "jmp @%0\n\t" \ - " mov %3,%0\n\t" \ - ".balign 4\n" \ - "4: .long 2b\n\t" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 3b\n\t" \ - ".previous" \ - : "=r" (retval) \ - : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \ - : "memory"); }) -#endif - -extern void __put_user_unknown(void); - -static inline int -__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count) -{ - __kernel_size_t res; - unsigned long __dummy, _d, _s, _c; - - __asm__ __volatile__( - "9:\n" - "mov.b @%2+, %1\n\t" - "cmp/eq #0, %1\n\t" - "bt/s 2f\n" - "1:\n" - "mov.b %1, @%3\n\t" - "dt %4\n\t" - "bf/s 9b\n\t" - " add #1, %3\n\t" - "2:\n\t" - "sub %4, %0\n" - "3:\n" - ".section .fixup,\"ax\"\n" - "4:\n\t" - "mov.l 5f, %1\n\t" - "jmp @%1\n\t" - " mov %9, %0\n\t" - ".balign 4\n" - "5: .long 3b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .balign 4\n" - " .long 9b,4b\n" - ".previous" - : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c) - : "0" (__count), "2" (__src), "3" (__dest), "4" (__count), - "i" (-EFAULT) - : "memory", "t"); - - return res; -} - -/* - * Return the size of a string (including the ending 0 even when we have - * exceeded the maximum string length). - */ -static inline long __strnlen_user(const char __user *__s, long __n) -{ - unsigned long res; - unsigned long __dummy; - - __asm__ __volatile__( - "1:\t" - "mov.b @(%0,%3), %1\n\t" - "cmp/eq %4, %0\n\t" - "bt/s 2f\n\t" - " add #1, %0\n\t" - "tst %1, %1\n\t" - "bf 1b\n\t" - "2:\n" - ".section .fixup,\"ax\"\n" - "3:\n\t" - "mov.l 4f, %1\n\t" - "jmp @%1\n\t" - " mov #0, %0\n" - ".balign 4\n" - "4: .long 2b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .balign 4\n" - " .long 1b,3b\n" - ".previous" - : "=z" (res), "=&r" (__dummy) - : "0" (0), "r" (__s), "r" (__n) - : "t"); - return res; -} - -#endif /* __ASM_SH_UACCESS_32_H */ diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h deleted file mode 100644 index 81b3d515fcb3..000000000000 --- a/include/asm-sh/uaccess_64.h +++ /dev/null @@ -1,79 +0,0 @@ -#ifndef __ASM_SH_UACCESS_64_H -#define __ASM_SH_UACCESS_64_H - -/* - * include/asm-sh/uaccess_64.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - * - * User space memory access functions - * - * Copyright (C) 1999 Niibe Yutaka - * - * Based on: - * MIPS implementation version 1.15 by - * Copyright (C) 1996, 1997, 1998 by Ralf Baechle - * and i386 version. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#define __get_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - retval = __get_user_asm_b(x, ptr); \ - break; \ - case 2: \ - retval = __get_user_asm_w(x, ptr); \ - break; \ - case 4: \ - retval = __get_user_asm_l(x, ptr); \ - break; \ - case 8: \ - retval = __get_user_asm_q(x, ptr); \ - break; \ - default: \ - __get_user_unknown(); \ - break; \ - } \ -} while (0) - -extern long __get_user_asm_b(void *, long); -extern long __get_user_asm_w(void *, long); -extern long __get_user_asm_l(void *, long); -extern long __get_user_asm_q(void *, long); -extern void __get_user_unknown(void); - -#define __put_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - retval = __put_user_asm_b(x, ptr); \ - break; \ - case 2: \ - retval = __put_user_asm_w(x, ptr); \ - break; \ - case 4: \ - retval = __put_user_asm_l(x, ptr); \ - break; \ - case 8: \ - retval = __put_user_asm_q(x, ptr); \ - break; \ - default: \ - __put_user_unknown(); \ - } \ -} while (0) - -extern long __put_user_asm_b(void *, long); -extern long __put_user_asm_w(void *, long); -extern long __put_user_asm_l(void *, long); -extern long __put_user_asm_q(void *, long); -extern void __put_user_unknown(void); - -#endif /* __ASM_SH_UACCESS_64_H */ diff --git a/include/asm-sh/ubc.h b/include/asm-sh/ubc.h deleted file mode 100644 index 56f4e30dc49c..000000000000 --- a/include/asm-sh/ubc.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * include/asm-sh/ubc.h - * - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_SH_UBC_H -#define __ASM_SH_UBC_H -#ifdef __KERNEL__ - -#include - -/* User Break Controller */ -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) -#define UBC_TYPE_SH7729 (current_cpu_data.type == CPU_SH7729) -#else -#define UBC_TYPE_SH7729 0 -#endif - -#define BAMR_ASID (1 << 2) -#define BAMR_NONE 0 -#define BAMR_10 0x1 -#define BAMR_12 0x2 -#define BAMR_ALL 0x3 -#define BAMR_16 0x8 -#define BAMR_20 0x9 - -#define BBR_INST (1 << 4) -#define BBR_DATA (2 << 4) -#define BBR_READ (1 << 2) -#define BBR_WRITE (2 << 2) -#define BBR_BYTE 0x1 -#define BBR_HALF 0x2 -#define BBR_LONG 0x3 -#define BBR_QUAD (1 << 6) /* SH7750 */ -#define BBR_CPU (1 << 6) /* SH7709A,SH7729 */ -#define BBR_DMA (2 << 6) /* SH7709A,SH7729 */ - -#define BRCR_CMFA (1 << 15) -#define BRCR_CMFB (1 << 14) -#define BRCR_PCTE (1 << 11) -#define BRCR_PCBA (1 << 10) /* 1: after execution */ -#define BRCR_DBEB (1 << 7) -#define BRCR_PCBB (1 << 6) -#define BRCR_SEQ (1 << 3) -#define BRCR_UBDE (1 << 0) - -#ifndef __ASSEMBLY__ -/* arch/sh/kernel/cpu/ubc.S */ -extern void ubc_sleep(void); - -#ifdef CONFIG_UBC_WAKEUP -extern void ubc_wakeup(void); -#else -#define ubc_wakeup() do { } while (0) -#endif -#endif - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_UBC_H */ diff --git a/include/asm-sh/ucontext.h b/include/asm-sh/ucontext.h deleted file mode 100644 index 202ef1d5a3c4..000000000000 --- a/include/asm-sh/ucontext.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __ASM_SH_UCONTEXT_H -#define __ASM_SH_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* __ASM_SH_UCONTEXT_H */ diff --git a/include/asm-sh/unaligned.h b/include/asm-sh/unaligned.h deleted file mode 100644 index c1641a01d50f..000000000000 --- a/include/asm-sh/unaligned.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_SH_UNALIGNED_H -#define _ASM_SH_UNALIGNED_H - -/* SH can't handle unaligned accesses. */ -#ifdef __LITTLE_ENDIAN__ -# include -# include -# include -# define get_unaligned __get_unaligned_le -# define put_unaligned __put_unaligned_le -#else -# include -# include -# include -# define get_unaligned __get_unaligned_be -# define put_unaligned __put_unaligned_be -#endif - -#endif /* _ASM_SH_UNALIGNED_H */ diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h deleted file mode 100644 index 65be656ead7d..000000000000 --- a/include/asm-sh/unistd.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifdef __KERNEL__ -# ifdef CONFIG_SUPERH32 -# include "unistd_32.h" -# else -# include "unistd_64.h" -# endif -#else -# ifdef __SH5__ -# include "unistd_64.h" -# else -# include "unistd_32.h" -# endif -#endif diff --git a/include/asm-sh/unistd_32.h b/include/asm-sh/unistd_32.h deleted file mode 100644 index d52c000cf924..000000000000 --- a/include/asm-sh/unistd_32.h +++ /dev/null @@ -1,384 +0,0 @@ -#ifndef __ASM_SH_UNISTD_H -#define __ASM_SH_UNISTD_H - -/* - * Copyright (C) 1999 Niibe Yutaka - */ - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_vm86old 113 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_vm86 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_streams1 188 /* some people actually want it */ -#define __NR_streams2 189 /* some people actually want it */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 -#define __NR_getdents64 220 -#define __NR_fcntl64 221 -/* 223 is unused */ -#define __NR_gettid 224 -#define __NR_readahead 225 -#define __NR_setxattr 226 -#define __NR_lsetxattr 227 -#define __NR_fsetxattr 228 -#define __NR_getxattr 229 -#define __NR_lgetxattr 230 -#define __NR_fgetxattr 231 -#define __NR_listxattr 232 -#define __NR_llistxattr 233 -#define __NR_flistxattr 234 -#define __NR_removexattr 235 -#define __NR_lremovexattr 236 -#define __NR_fremovexattr 237 -#define __NR_tkill 238 -#define __NR_sendfile64 239 -#define __NR_futex 240 -#define __NR_sched_setaffinity 241 -#define __NR_sched_getaffinity 242 -#define __NR_set_thread_area 243 -#define __NR_get_thread_area 244 -#define __NR_io_setup 245 -#define __NR_io_destroy 246 -#define __NR_io_getevents 247 -#define __NR_io_submit 248 -#define __NR_io_cancel 249 -#define __NR_fadvise64 250 - -#define __NR_exit_group 252 -#define __NR_lookup_dcookie 253 -#define __NR_epoll_create 254 -#define __NR_epoll_ctl 255 -#define __NR_epoll_wait 256 -#define __NR_remap_file_pages 257 -#define __NR_set_tid_address 258 -#define __NR_timer_create 259 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 268 -#define __NR_fstatfs64 269 -#define __NR_tgkill 270 -#define __NR_utimes 271 -#define __NR_fadvise64_64 272 -#define __NR_vserver 273 -#define __NR_mbind 274 -#define __NR_get_mempolicy 275 -#define __NR_set_mempolicy 276 -#define __NR_mq_open 277 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) -#define __NR_kexec_load 283 -#define __NR_waitid 284 -#define __NR_add_key 285 -#define __NR_request_key 286 -#define __NR_keyctl 287 -#define __NR_ioprio_set 288 -#define __NR_ioprio_get 289 -#define __NR_inotify_init 290 -#define __NR_inotify_add_watch 291 -#define __NR_inotify_rm_watch 292 -/* 293 is unused */ -#define __NR_migrate_pages 294 -#define __NR_openat 295 -#define __NR_mkdirat 296 -#define __NR_mknodat 297 -#define __NR_fchownat 298 -#define __NR_futimesat 299 -#define __NR_fstatat64 300 -#define __NR_unlinkat 301 -#define __NR_renameat 302 -#define __NR_linkat 303 -#define __NR_symlinkat 304 -#define __NR_readlinkat 305 -#define __NR_fchmodat 306 -#define __NR_faccessat 307 -#define __NR_pselect6 308 -#define __NR_ppoll 309 -#define __NR_unshare 310 -#define __NR_set_robust_list 311 -#define __NR_get_robust_list 312 -#define __NR_splice 313 -#define __NR_sync_file_range 314 -#define __NR_tee 315 -#define __NR_vmsplice 316 -#define __NR_move_pages 317 -#define __NR_getcpu 318 -#define __NR_epoll_pwait 319 -#define __NR_utimensat 320 -#define __NR_signalfd 321 -#define __NR_timerfd_create 322 -#define __NR_eventfd 323 -#define __NR_fallocate 324 -#define __NR_timerfd_settime 325 -#define __NR_timerfd_gettime 326 -#define __NR_signalfd4 327 -#define __NR_eventfd2 328 -#define __NR_epoll_create1 329 -#define __NR_dup3 330 -#define __NR_pipe2 331 -#define __NR_inotify_init1 332 - -#define NR_syscalls 333 - -#ifdef __KERNEL__ - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#ifndef cond_syscall -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") -#endif - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_UNISTD_H */ diff --git a/include/asm-sh/unistd_64.h b/include/asm-sh/unistd_64.h deleted file mode 100644 index 7c54e91753c1..000000000000 --- a/include/asm-sh/unistd_64.h +++ /dev/null @@ -1,423 +0,0 @@ -#ifndef __ASM_SH_UNISTD_64_H -#define __ASM_SH_UNISTD_64_H - -/* - * include/asm-sh/unistd_64.h - * - * This file contains the system call numbers. - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 - 2007 Paul Mundt - * Copyright (C) 2004 Sean McGoogan - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 /* old implementation of socket systemcall */ -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_vm86old 113 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_vm86 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_streams1 188 /* some people actually want it */ -#define __NR_streams2 189 /* some people actually want it */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 - -/* Non-multiplexed socket family */ -#define __NR_socket 220 -#define __NR_bind 221 -#define __NR_connect 222 -#define __NR_listen 223 -#define __NR_accept 224 -#define __NR_getsockname 225 -#define __NR_getpeername 226 -#define __NR_socketpair 227 -#define __NR_send 228 -#define __NR_sendto 229 -#define __NR_recv 230 -#define __NR_recvfrom 231 -#define __NR_shutdown 232 -#define __NR_setsockopt 233 -#define __NR_getsockopt 234 -#define __NR_sendmsg 235 -#define __NR_recvmsg 236 - -/* Non-multiplexed IPC family */ -#define __NR_semop 237 -#define __NR_semget 238 -#define __NR_semctl 239 -#define __NR_msgsnd 240 -#define __NR_msgrcv 241 -#define __NR_msgget 242 -#define __NR_msgctl 243 -#if 0 -#define __NR_shmatcall 244 -#endif -#define __NR_shmdt 245 -#define __NR_shmget 246 -#define __NR_shmctl 247 - -#define __NR_getdents64 248 -#define __NR_fcntl64 249 -/* 223 is unused */ -#define __NR_gettid 252 -#define __NR_readahead 253 -#define __NR_setxattr 254 -#define __NR_lsetxattr 255 -#define __NR_fsetxattr 256 -#define __NR_getxattr 257 -#define __NR_lgetxattr 258 -#define __NR_fgetxattr 269 -#define __NR_listxattr 260 -#define __NR_llistxattr 261 -#define __NR_flistxattr 262 -#define __NR_removexattr 263 -#define __NR_lremovexattr 264 -#define __NR_fremovexattr 265 -#define __NR_tkill 266 -#define __NR_sendfile64 267 -#define __NR_futex 268 -#define __NR_sched_setaffinity 269 -#define __NR_sched_getaffinity 270 -#define __NR_set_thread_area 271 -#define __NR_get_thread_area 272 -#define __NR_io_setup 273 -#define __NR_io_destroy 274 -#define __NR_io_getevents 275 -#define __NR_io_submit 276 -#define __NR_io_cancel 277 -#define __NR_fadvise64 278 -#define __NR_exit_group 280 - -#define __NR_lookup_dcookie 281 -#define __NR_epoll_create 282 -#define __NR_epoll_ctl 283 -#define __NR_epoll_wait 284 -#define __NR_remap_file_pages 285 -#define __NR_set_tid_address 286 -#define __NR_timer_create 287 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 296 -#define __NR_fstatfs64 297 -#define __NR_tgkill 298 -#define __NR_utimes 299 -#define __NR_fadvise64_64 300 -#define __NR_vserver 301 -#define __NR_mbind 302 -#define __NR_get_mempolicy 303 -#define __NR_set_mempolicy 304 -#define __NR_mq_open 305 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) -#define __NR_kexec_load 311 -#define __NR_waitid 312 -#define __NR_add_key 313 -#define __NR_request_key 314 -#define __NR_keyctl 315 -#define __NR_ioprio_set 316 -#define __NR_ioprio_get 317 -#define __NR_inotify_init 318 -#define __NR_inotify_add_watch 319 -#define __NR_inotify_rm_watch 320 -/* 321 is unused */ -#define __NR_migrate_pages 322 -#define __NR_openat 323 -#define __NR_mkdirat 324 -#define __NR_mknodat 325 -#define __NR_fchownat 326 -#define __NR_futimesat 327 -#define __NR_fstatat64 328 -#define __NR_unlinkat 329 -#define __NR_renameat 330 -#define __NR_linkat 331 -#define __NR_symlinkat 332 -#define __NR_readlinkat 333 -#define __NR_fchmodat 334 -#define __NR_faccessat 335 -#define __NR_pselect6 336 -#define __NR_ppoll 337 -#define __NR_unshare 338 -#define __NR_set_robust_list 339 -#define __NR_get_robust_list 340 -#define __NR_splice 341 -#define __NR_sync_file_range 342 -#define __NR_tee 343 -#define __NR_vmsplice 344 -#define __NR_move_pages 345 -#define __NR_getcpu 346 -#define __NR_epoll_pwait 347 -#define __NR_utimensat 348 -#define __NR_signalfd 349 -#define __NR_timerfd_create 350 -#define __NR_eventfd 351 -#define __NR_fallocate 352 -#define __NR_timerfd_settime 353 -#define __NR_timerfd_gettime 354 -#define __NR_signalfd4 355 -#define __NR_eventfd2 356 -#define __NR_epoll_create1 357 -#define __NR_dup3 358 -#define __NR_pipe2 359 -#define __NR_inotify_init1 360 - -#ifdef __KERNEL__ - -#define NR_syscalls 361 - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#ifndef cond_syscall -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") -#endif - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_UNISTD_64_H */ diff --git a/include/asm-sh/user.h b/include/asm-sh/user.h deleted file mode 100644 index 8fd3cf6c58d4..000000000000 --- a/include/asm-sh/user.h +++ /dev/null @@ -1,67 +0,0 @@ -#ifndef __ASM_SH_USER_H -#define __ASM_SH_USER_H - -#include -#include - -/* - * Core file format: The core file is written in such a way that gdb - * can understand it and provide useful information to the user (under - * linux we use the `trad-core' bfd). The file contents are as follows: - * - * upage: 1 page consisting of a user struct that tells gdb - * what is present in the file. Directly after this is a - * copy of the task_struct, which is currently not used by gdb, - * but it may come in handy at some point. All of the registers - * are stored as part of the upage. The upage should always be - * only one page long. - * data: The data segment follows next. We use current->end_text to - * current->brk to pick up all of the user variables, plus any memory - * that may have been sbrk'ed. No attempt is made to determine if a - * page is demand-zero or if a page is totally unused, we just cover - * the entire range. All of the addresses are rounded in such a way - * that an integral number of pages is written. - * stack: We need the stack information in order to get a meaningful - * backtrace. We need to write the data from usp to - * current->start_stack, so we round each of these in order to be able - * to write an integer number of pages. - */ - -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) -struct user_fpu_struct { - unsigned long fp_regs[32]; - unsigned int fpscr; -}; -#else -struct user_fpu_struct { - unsigned long fp_regs[16]; - unsigned long xfp_regs[16]; - unsigned long fpscr; - unsigned long fpul; -}; -#endif - -struct user { - struct pt_regs regs; /* entire machine state */ - struct user_fpu_struct fpu; /* Math Co-processor registers */ - int u_fpvalid; /* True if math co-processor being used */ - size_t u_tsize; /* text size (pages) */ - size_t u_dsize; /* data size (pages) */ - size_t u_ssize; /* stack size (pages) */ - unsigned long start_code; /* text starting address */ - unsigned long start_data; /* data starting address */ - unsigned long start_stack; /* stack starting address */ - long int signal; /* signal causing core dump */ - unsigned long u_ar0; /* help gdb find registers */ - struct user_fpu_struct* u_fpstate; /* Math Co-processor pointer */ - unsigned long magic; /* identifies a core file */ - char u_comm[32]; /* user command name */ -}; - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_DATA_START_ADDR (u.start_data) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif /* __ASM_SH_USER_H */ diff --git a/include/asm-sh/vga.h b/include/asm-sh/vga.h deleted file mode 100644 index 06a5de8ace1a..000000000000 --- a/include/asm-sh/vga.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_VGA_H -#define __ASM_SH_VGA_H - -/* Stupid drivers. */ - -#endif /* __ASM_SH_VGA_H */ diff --git a/include/asm-sh/watchdog.h b/include/asm-sh/watchdog.h deleted file mode 100644 index d19ea62ef8c6..000000000000 --- a/include/asm-sh/watchdog.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * include/asm-sh/watchdog.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __ASM_SH_WATCHDOG_H -#define __ASM_SH_WATCHDOG_H -#ifdef __KERNEL__ - -#include -#include -#include - -/* - * See asm/cpu-sh2/watchdog.h for explanation of this stupidity.. - */ -#ifndef WTCNT_R -# define WTCNT_R WTCNT -#endif - -#ifndef WTCSR_R -# define WTCSR_R WTCSR -#endif - -#define WTCNT_HIGH 0x5a -#define WTCSR_HIGH 0xa5 - -#define WTCSR_CKS2 0x04 -#define WTCSR_CKS1 0x02 -#define WTCSR_CKS0 0x01 - -/* - * CKS0-2 supports a number of clock division ratios. At the time the watchdog - * is enabled, it defaults to a 41 usec overflow period .. we overload this to - * something a little more reasonable, and really can't deal with anything - * lower than WTCSR_CKS_1024, else we drop back into the usec range. - * - * Clock Division Ratio Overflow Period - * -------------------------------------------- - * 1/32 (initial value) 41 usecs - * 1/64 82 usecs - * 1/128 164 usecs - * 1/256 328 usecs - * 1/512 656 usecs - * 1/1024 1.31 msecs - * 1/2048 2.62 msecs - * 1/4096 5.25 msecs - */ -#define WTCSR_CKS_32 0x00 -#define WTCSR_CKS_64 0x01 -#define WTCSR_CKS_128 0x02 -#define WTCSR_CKS_256 0x03 -#define WTCSR_CKS_512 0x04 -#define WTCSR_CKS_1024 0x05 -#define WTCSR_CKS_2048 0x06 -#define WTCSR_CKS_4096 0x07 - -/** - * sh_wdt_read_cnt - Read from Counter - * Reads back the WTCNT value. - */ -static inline __u8 sh_wdt_read_cnt(void) -{ - return ctrl_inb(WTCNT_R); -} - -/** - * sh_wdt_write_cnt - Write to Counter - * @val: Value to write - * - * Writes the given value @val to the lower byte of the timer counter. - * The upper byte is set manually on each write. - */ -static inline void sh_wdt_write_cnt(__u8 val) -{ - ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT); -} - -/** - * sh_wdt_read_csr - Read from Control/Status Register - * - * Reads back the WTCSR value. - */ -static inline __u8 sh_wdt_read_csr(void) -{ - return ctrl_inb(WTCSR_R); -} - -/** - * sh_wdt_write_csr - Write to Control/Status Register - * @val: Value to write - * - * Writes the given value @val to the lower byte of the control/status - * register. The upper byte is set manually on each write. - */ -static inline void sh_wdt_write_csr(__u8 val) -{ - ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR); -} - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_WATCHDOG_H */ diff --git a/include/asm-sh/xor.h b/include/asm-sh/xor.h deleted file mode 100644 index c82eb12a5b18..000000000000 --- a/include/asm-sh/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/sound/sh/aica.c b/sound/sh/aica.c index 9ca113326143..54df8baf916f 100644 --- a/sound/sh/aica.c +++ b/sound/sh/aica.c @@ -42,7 +42,7 @@ #include #include #include -#include +#include #include "aica.h" MODULE_AUTHOR("Adrian McMenamin "); -- cgit v1.2.3 From cc64f7f70033d6cf18f716c885a7df858ad51766 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 08:24:50 +0900 Subject: sh: dreamcast: fix build failure from header reorg. Oops, machvec.h is in asm/, it was previously removed due to overzealous trimming. Fix up the path again. Signed-off-by: Paul Mundt --- arch/sh/boards/dreamcast/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c index 14c3e57ff410..7d944fc75e93 100644 --- a/arch/sh/boards/dreamcast/setup.c +++ b/arch/sh/boards/dreamcast/setup.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include extern struct hw_interrupt_type systemasic_int; -- cgit v1.2.3 From b9edb17cc268bc4c6f344264fb9af73f646a02c1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 08:29:32 +0900 Subject: sh: Add an arch/sh/kernel/.gitignore Ignore vmlinux.lds. Signed-off-by: Paul Mundt --- arch/sh/kernel/.gitignore | 1 + 1 file changed, 1 insertion(+) create mode 100644 arch/sh/kernel/.gitignore diff --git a/arch/sh/kernel/.gitignore b/arch/sh/kernel/.gitignore new file mode 100644 index 000000000000..c5f676c3c224 --- /dev/null +++ b/arch/sh/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds -- cgit v1.2.3 From d27e0854d5773fffe1a1d475032b715d124325ae Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 09:15:01 +0900 Subject: sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation. If none is defined, provide a sane default, as we do for the other options. Signed-off-by: Paul Mundt --- arch/sh/boot/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 8b37869a8227..5b54965eef98 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -18,9 +18,10 @@ CONFIG_PAGE_OFFSET ?= 0x80000000 CONFIG_MEMORY_START ?= 0x0c000000 CONFIG_BOOT_LINK_OFFSET ?= 0x00800000 CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000 +CONFIG_ENTRY_OFFSET ?= 0x00001000 export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \ - CONFIG_ZERO_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET targets := zImage vmlinux.srec uImage uImage.srec subdir- := compressed -- cgit v1.2.3 From 6de9c6481d47c6da5f8b81f75a5c24c69c366f37 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 29 Jul 2008 09:16:33 +0900 Subject: sh: Proper __put_user_asm() size mismatch fix. This fixes up the workaround in 2b4b2bb42137c779ef0084de5df66ff21b4cd86e and cleans up __put_user_asm() to get the sizing right from the onset. Signed-off-by: OGAWA Hirofumi Signed-off-by: Paul Mundt --- arch/sh/include/asm/uaccess.h | 6 ++++-- arch/sh/include/asm/uaccess_32.h | 3 +-- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h index 45c2c9b2993d..075848f43b6a 100644 --- a/arch/sh/include/asm/uaccess.h +++ b/arch/sh/include/asm/uaccess.h @@ -77,8 +77,9 @@ struct __large_struct { unsigned long buf[100]; }; ({ \ long __pu_err; \ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = x; \ __chk_user_ptr(ptr); \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ + __put_user_size(__pu_val, __pu_addr, (size), __pu_err); \ __pu_err; \ }) @@ -86,8 +87,9 @@ struct __large_struct { unsigned long buf[100]; }; ({ \ long __pu_err = -EFAULT; \ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = x; \ if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \ - __put_user_size((x), __pu_addr, (size), \ + __put_user_size(__pu_val, __pu_addr, (size), \ __pu_err); \ __pu_err; \ }) diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h index 892fd6dea9db..ae0d24f6653f 100644 --- a/arch/sh/include/asm/uaccess_32.h +++ b/arch/sh/include/asm/uaccess_32.h @@ -76,8 +76,7 @@ do { \ __put_user_asm(x, ptr, retval, "w"); \ break; \ case 4: \ - __put_user_asm((u32)x, ptr, \ - retval, "l"); \ + __put_user_asm(x, ptr, retval, "l"); \ break; \ case 8: \ __put_user_u64(x, ptr, retval); \ -- cgit v1.2.3 From df10cfbc4d7ab93260d997df754219d390d62a9d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 28 Jul 2008 23:10:39 -0700 Subject: md: do not progress the resync process if the stripe was blocked handle_stripe will take no action on a stripe when waiting for userspace to unblock the array, so do not report completed sectors. Signed-off-by: Dan Williams --- drivers/md/raid5.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 46132fca3469..b428e15d59af 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2507,7 +2507,7 @@ static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh, * */ -static void handle_stripe5(struct stripe_head *sh) +static bool handle_stripe5(struct stripe_head *sh) { raid5_conf_t *conf = sh->raid_conf; int disks = sh->disks, i; @@ -2755,9 +2755,11 @@ static void handle_stripe5(struct stripe_head *sh) ops_run_io(sh, &s); return_io(return_bi); + + return blocked_rdev == NULL; } -static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) +static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page) { raid6_conf_t *conf = sh->raid_conf; int disks = sh->disks; @@ -2968,14 +2970,17 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) ops_run_io(sh, &s); return_io(return_bi); + + return blocked_rdev == NULL; } -static void handle_stripe(struct stripe_head *sh, struct page *tmp_page) +/* returns true if the stripe was handled */ +static bool handle_stripe(struct stripe_head *sh, struct page *tmp_page) { if (sh->raid_conf->level == 6) - handle_stripe6(sh, tmp_page); + return handle_stripe6(sh, tmp_page); else - handle_stripe5(sh); + return handle_stripe5(sh); } @@ -3691,7 +3696,9 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski clear_bit(STRIPE_INSYNC, &sh->state); spin_unlock(&sh->lock); - handle_stripe(sh, NULL); + /* wait for any blocked device to be handled */ + while(unlikely(!handle_stripe(sh, NULL))) + ; release_stripe(sh); return STRIPE_SECTORS; -- cgit v1.2.3 From e542713529e323ff09d7aeb5806cf29f6f160f53 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 28 Jul 2008 23:28:06 -0700 Subject: md: do not count blocked devices as spares remove_and_add_spares() assumes that failed devices have been hot-removed from the array. Removal is skipped in the 'blocked' case so do not count a device in this state as 'spare'. Signed-off-by: Dan Williams --- drivers/md/md.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 0f1b83096425..c7aae66c6f9b 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5996,7 +5996,8 @@ static int remove_and_add_spares(mddev_t *mddev) if (mddev->degraded) { rdev_for_each(rdev, rtmp, mddev) { if (rdev->raid_disk >= 0 && - !test_bit(In_sync, &rdev->flags)) + !test_bit(In_sync, &rdev->flags) && + !test_bit(Blocked, &rdev->flags)) spares++; if (rdev->raid_disk < 0 && !test_bit(Faulty, &rdev->flags)) { -- cgit v1.2.3 From 558a171d778293176bf70bc34e18a92faef5bfa1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 29 Jul 2008 01:14:59 -0400 Subject: Input: wm97xx - enable sub-drivers by default Currently the support for each WM97xx touchscreen model is compiled out by default, meaning that the default configuration when the driver is built is for it to support no hardware. This is suboptimal and leads to problems like distribution kernels shipping a non-functional driver. Change the default to support all controllers and update the help text to reflect this. Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/Kconfig | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 6e60a97a234c..25287e80e236 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -249,29 +249,26 @@ config TOUCHSCREEN_WM97XX config TOUCHSCREEN_WM9705 bool "WM9705 Touchscreen interface support" depends on TOUCHSCREEN_WM97XX + default y help - Say Y here if you have a Wolfson Microelectronics WM9705 - touchscreen controller connected to your system. - - If unsure, say N. + Say Y here to enable support for the Wolfson Microelectronics + WM9705 touchscreen controller. config TOUCHSCREEN_WM9712 bool "WM9712 Touchscreen interface support" depends on TOUCHSCREEN_WM97XX + default y help - Say Y here if you have a Wolfson Microelectronics WM9712 - touchscreen controller connected to your system. - - If unsure, say N. + Say Y here to enable support for the Wolfson Microelectronics + WM9712 touchscreen controller. config TOUCHSCREEN_WM9713 bool "WM9713 Touchscreen interface support" depends on TOUCHSCREEN_WM97XX + default y help - Say Y here if you have a Wolfson Microelectronics WM9713 touchscreen - controller connected to your system. - - If unsure, say N. + Say Y here to enable support for the Wolfson Microelectronics + WM9713 touchscreen controller. config TOUCHSCREEN_WM97XX_MAINSTONE tristate "WM97xx Mainstone accelerated touch" -- cgit v1.2.3 From 4864841a34ad77a5054f20d18453ae38a926afd8 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 29 Jul 2008 14:37:25 +0900 Subject: sh: Fix compile error of Solution Engine When I compiled Solution Engine, this become compile error because plaform device of sh_eth device becomes enable. When sh7710/sh7712 which could use sh_eth was chosen, revised it so that platform device of sh_eth device became enable. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/boards/se/770x/setup.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index cf4a5ba12df4..6c64d774da3a 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -113,6 +113,8 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; +#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7712) /* SH771X Ethernet driver */ static struct resource sh_eth0_resources[] = { [0] = { @@ -159,12 +161,16 @@ static struct platform_device sh_eth1_device = { .num_resources = ARRAY_SIZE(sh_eth1_resources), .resource = sh_eth1_resources, }; +#endif static struct platform_device *se_devices[] __initdata = { &heartbeat_device, &cf_ide_device, +#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7712) &sh_eth0_device, &sh_eth1_device, +#endif }; static int __init se_devices_setup(void) -- cgit v1.2.3 From a1708ce8a362c4999f1201237ae7b77c4d13af82 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Fri, 25 Jul 2008 16:26:39 +0200 Subject: KVM: Allow reading aliases with mmu_lock This allows the mmu notifier code to run unalias_gfn with only the mmu_lock held. Only alias writes need the mmu_lock held. Readers will either take the slots_lock in read mode or the mmu_lock. Signed-off-by: Andrea Arcangeli Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 5916191420c7..9870ce422920 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1495,6 +1495,7 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm, goto out; down_write(&kvm->slots_lock); + spin_lock(&kvm->mmu_lock); p = &kvm->arch.aliases[alias->slot]; p->base_gfn = alias->guest_phys_addr >> PAGE_SHIFT; @@ -1506,6 +1507,7 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm, break; kvm->arch.naliases = n; + spin_unlock(&kvm->mmu_lock); kvm_mmu_zap_all(kvm); up_write(&kvm->slots_lock); -- cgit v1.2.3 From 604b38ac0369bd50fcbb33344aa5553c071009f7 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Fri, 25 Jul 2008 16:32:03 +0200 Subject: KVM: Allow browsing memslots with mmu_lock This allows reading memslots with only the mmu_lock hold for mmu notifiers that runs in atomic context and with mmu_lock held. Signed-off-by: Andrea Arcangeli Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 21 ++++++++++++++------- virt/kvm/kvm_main.c | 20 ++++++++++++++++---- 2 files changed, 30 insertions(+), 11 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 9870ce422920..c7b01efe0646 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -3974,16 +3974,23 @@ int kvm_arch_set_memory_region(struct kvm *kvm, */ if (!user_alloc) { if (npages && !old.rmap) { + unsigned long userspace_addr; + down_write(¤t->mm->mmap_sem); - memslot->userspace_addr = do_mmap(NULL, 0, - npages * PAGE_SIZE, - PROT_READ | PROT_WRITE, - MAP_SHARED | MAP_ANONYMOUS, - 0); + userspace_addr = do_mmap(NULL, 0, + npages * PAGE_SIZE, + PROT_READ | PROT_WRITE, + MAP_SHARED | MAP_ANONYMOUS, + 0); up_write(¤t->mm->mmap_sem); - if (IS_ERR((void *)memslot->userspace_addr)) - return PTR_ERR((void *)memslot->userspace_addr); + if (IS_ERR((void *)userspace_addr)) + return PTR_ERR((void *)userspace_addr); + + /* set userspace_addr atomically for kvm_hva_to_rmapp */ + spin_lock(&kvm->mmu_lock); + memslot->userspace_addr = userspace_addr; + spin_unlock(&kvm->mmu_lock); } else { if (!old.user_alloc && old.rmap) { int ret; diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index a845890b6800..3735212cd3f8 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -375,7 +375,15 @@ int __kvm_set_memory_region(struct kvm *kvm, memset(new.rmap, 0, npages * sizeof(*new.rmap)); new.user_alloc = user_alloc; - new.userspace_addr = mem->userspace_addr; + /* + * hva_to_rmmap() serialzies with the mmu_lock and to be + * safe it has to ignore memslots with !user_alloc && + * !userspace_addr. + */ + if (user_alloc) + new.userspace_addr = mem->userspace_addr; + else + new.userspace_addr = 0; } if (npages && !new.lpage_info) { int largepages = npages / KVM_PAGES_PER_HPAGE; @@ -408,17 +416,21 @@ int __kvm_set_memory_region(struct kvm *kvm, } #endif /* not defined CONFIG_S390 */ - if (mem->slot >= kvm->nmemslots) - kvm->nmemslots = mem->slot + 1; - if (!npages) kvm_arch_flush_shadow(kvm); + spin_lock(&kvm->mmu_lock); + if (mem->slot >= kvm->nmemslots) + kvm->nmemslots = mem->slot + 1; + *memslot = new; + spin_unlock(&kvm->mmu_lock); r = kvm_arch_set_memory_region(kvm, mem, old, user_alloc); if (r) { + spin_lock(&kvm->mmu_lock); *memslot = old; + spin_unlock(&kvm->mmu_lock); goto out_free; } -- cgit v1.2.3 From e930bffe95e1e886a1ede80726ea38df5838d067 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Fri, 25 Jul 2008 16:24:52 +0200 Subject: KVM: Synchronize guest physical memory map to host virtual memory map Synchronize changes to host virtual addresses which are part of a KVM memory slot to the KVM shadow mmu. This allows pte operations like swapping, page migration, and madvise() to transparently work with KVM. Signed-off-by: Andrea Arcangeli Signed-off-by: Avi Kivity --- arch/x86/kvm/mmu.c | 100 +++++++++++++++++++++++++++++++++ arch/x86/kvm/paging_tmpl.h | 12 ++++ include/asm-x86/kvm_host.h | 6 ++ include/linux/kvm_host.h | 24 ++++++++ virt/kvm/kvm_main.c | 135 +++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 277 insertions(+) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 2fa231923cf7..0bfe2bd305eb 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -653,6 +653,84 @@ static void rmap_write_protect(struct kvm *kvm, u64 gfn) account_shadowed(kvm, gfn); } +static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp) +{ + u64 *spte; + int need_tlb_flush = 0; + + while ((spte = rmap_next(kvm, rmapp, NULL))) { + BUG_ON(!(*spte & PT_PRESENT_MASK)); + rmap_printk("kvm_rmap_unmap_hva: spte %p %llx\n", spte, *spte); + rmap_remove(kvm, spte); + set_shadow_pte(spte, shadow_trap_nonpresent_pte); + need_tlb_flush = 1; + } + return need_tlb_flush; +} + +static int kvm_handle_hva(struct kvm *kvm, unsigned long hva, + int (*handler)(struct kvm *kvm, unsigned long *rmapp)) +{ + int i; + int retval = 0; + + /* + * If mmap_sem isn't taken, we can look the memslots with only + * the mmu_lock by skipping over the slots with userspace_addr == 0. + */ + for (i = 0; i < kvm->nmemslots; i++) { + struct kvm_memory_slot *memslot = &kvm->memslots[i]; + unsigned long start = memslot->userspace_addr; + unsigned long end; + + /* mmu_lock protects userspace_addr */ + if (!start) + continue; + + end = start + (memslot->npages << PAGE_SHIFT); + if (hva >= start && hva < end) { + gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT; + retval |= handler(kvm, &memslot->rmap[gfn_offset]); + retval |= handler(kvm, + &memslot->lpage_info[ + gfn_offset / + KVM_PAGES_PER_HPAGE].rmap_pde); + } + } + + return retval; +} + +int kvm_unmap_hva(struct kvm *kvm, unsigned long hva) +{ + return kvm_handle_hva(kvm, hva, kvm_unmap_rmapp); +} + +static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp) +{ + u64 *spte; + int young = 0; + + spte = rmap_next(kvm, rmapp, NULL); + while (spte) { + int _young; + u64 _spte = *spte; + BUG_ON(!(_spte & PT_PRESENT_MASK)); + _young = _spte & PT_ACCESSED_MASK; + if (_young) { + young = 1; + clear_bit(PT_ACCESSED_SHIFT, (unsigned long *)spte); + } + spte = rmap_next(kvm, rmapp, spte); + } + return young; +} + +int kvm_age_hva(struct kvm *kvm, unsigned long hva) +{ + return kvm_handle_hva(kvm, hva, kvm_age_rmapp); +} + #ifdef MMU_DEBUG static int is_empty_shadow_page(u64 *spt) { @@ -1203,6 +1281,7 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn) int r; int largepage = 0; pfn_t pfn; + unsigned long mmu_seq; down_read(¤t->mm->mmap_sem); if (is_largepage_backed(vcpu, gfn & ~(KVM_PAGES_PER_HPAGE-1))) { @@ -1210,6 +1289,8 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn) largepage = 1; } + mmu_seq = vcpu->kvm->mmu_notifier_seq; + /* implicit mb(), we'll read before PT lock is unlocked */ pfn = gfn_to_pfn(vcpu->kvm, gfn); up_read(¤t->mm->mmap_sem); @@ -1220,6 +1301,8 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn) } spin_lock(&vcpu->kvm->mmu_lock); + if (mmu_notifier_retry(vcpu, mmu_seq)) + goto out_unlock; kvm_mmu_free_some_pages(vcpu); r = __direct_map(vcpu, v, write, largepage, gfn, pfn, PT32E_ROOT_LEVEL); @@ -1227,6 +1310,11 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn) return r; + +out_unlock: + spin_unlock(&vcpu->kvm->mmu_lock); + kvm_release_pfn_clean(pfn); + return 0; } @@ -1345,6 +1433,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa, int r; int largepage = 0; gfn_t gfn = gpa >> PAGE_SHIFT; + unsigned long mmu_seq; ASSERT(vcpu); ASSERT(VALID_PAGE(vcpu->arch.mmu.root_hpa)); @@ -1358,6 +1447,8 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa, gfn &= ~(KVM_PAGES_PER_HPAGE-1); largepage = 1; } + mmu_seq = vcpu->kvm->mmu_notifier_seq; + /* implicit mb(), we'll read before PT lock is unlocked */ pfn = gfn_to_pfn(vcpu->kvm, gfn); up_read(¤t->mm->mmap_sem); if (is_error_pfn(pfn)) { @@ -1365,12 +1456,19 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa, return 1; } spin_lock(&vcpu->kvm->mmu_lock); + if (mmu_notifier_retry(vcpu, mmu_seq)) + goto out_unlock; kvm_mmu_free_some_pages(vcpu); r = __direct_map(vcpu, gpa, error_code & PFERR_WRITE_MASK, largepage, gfn, pfn, kvm_x86_ops->get_tdp_level()); spin_unlock(&vcpu->kvm->mmu_lock); return r; + +out_unlock: + spin_unlock(&vcpu->kvm->mmu_lock); + kvm_release_pfn_clean(pfn); + return 0; } static void nonpaging_free(struct kvm_vcpu *vcpu) @@ -1670,6 +1768,8 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, gfn &= ~(KVM_PAGES_PER_HPAGE-1); vcpu->arch.update_pte.largepage = 1; } + vcpu->arch.update_pte.mmu_seq = vcpu->kvm->mmu_notifier_seq; + /* implicit mb(), we'll read before PT lock is unlocked */ pfn = gfn_to_pfn(vcpu->kvm, gfn); up_read(¤t->mm->mmap_sem); diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index 4d918220baeb..f72ac1fa35f0 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -263,6 +263,8 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page, pfn = vcpu->arch.update_pte.pfn; if (is_error_pfn(pfn)) return; + if (mmu_notifier_retry(vcpu, vcpu->arch.update_pte.mmu_seq)) + return; kvm_get_pfn(pfn); mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0, gpte & PT_DIRTY_MASK, NULL, largepage, gpte_to_gfn(gpte), @@ -380,6 +382,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, int r; pfn_t pfn; int largepage = 0; + unsigned long mmu_seq; pgprintk("%s: addr %lx err %x\n", __func__, addr, error_code); kvm_mmu_audit(vcpu, "pre page fault"); @@ -413,6 +416,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, largepage = 1; } } + mmu_seq = vcpu->kvm->mmu_notifier_seq; + /* implicit mb(), we'll read before PT lock is unlocked */ pfn = gfn_to_pfn(vcpu->kvm, walker.gfn); up_read(¤t->mm->mmap_sem); @@ -424,6 +429,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, } spin_lock(&vcpu->kvm->mmu_lock); + if (mmu_notifier_retry(vcpu, mmu_seq)) + goto out_unlock; kvm_mmu_free_some_pages(vcpu); shadow_pte = FNAME(fetch)(vcpu, addr, &walker, user_fault, write_fault, largepage, &write_pt, pfn); @@ -439,6 +446,11 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, spin_unlock(&vcpu->kvm->mmu_lock); return write_pt; + +out_unlock: + spin_unlock(&vcpu->kvm->mmu_lock); + kvm_release_pfn_clean(pfn); + return 0; } static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr) diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h index bc34dc21f178..0f3c53114614 100644 --- a/include/asm-x86/kvm_host.h +++ b/include/asm-x86/kvm_host.h @@ -13,6 +13,7 @@ #include #include +#include #include #include @@ -251,6 +252,7 @@ struct kvm_vcpu_arch { gfn_t gfn; /* presumed gfn during guest pte update */ pfn_t pfn; /* pfn corresponding to that gfn */ int largepage; + unsigned long mmu_seq; } update_pte; struct i387_fxsave_struct host_fx_image; @@ -729,4 +731,8 @@ asmlinkage void kvm_handle_fault_on_reboot(void); KVM_EX_ENTRY " 666b, 667b \n\t" \ ".popsection" +#define KVM_ARCH_WANT_MMU_NOTIFIER +int kvm_unmap_hva(struct kvm *kvm, unsigned long hva); +int kvm_age_hva(struct kvm *kvm, unsigned long hva); + #endif diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 07d68a8ae8e9..8525afc53107 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -121,6 +121,12 @@ struct kvm { struct kvm_coalesced_mmio_dev *coalesced_mmio_dev; struct kvm_coalesced_mmio_ring *coalesced_mmio_ring; #endif + +#ifdef KVM_ARCH_WANT_MMU_NOTIFIER + struct mmu_notifier mmu_notifier; + unsigned long mmu_notifier_seq; + long mmu_notifier_count; +#endif }; /* The guest did something we don't support. */ @@ -332,4 +338,22 @@ int kvm_trace_ioctl(unsigned int ioctl, unsigned long arg) #define kvm_trace_cleanup() ((void)0) #endif +#ifdef KVM_ARCH_WANT_MMU_NOTIFIER +static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_seq) +{ + if (unlikely(vcpu->kvm->mmu_notifier_count)) + return 1; + /* + * Both reads happen under the mmu_lock and both values are + * modified under mmu_lock, so there's no need of smb_rmb() + * here in between, otherwise mmu_notifier_count should be + * read before mmu_notifier_seq, see + * mmu_notifier_invalidate_range_end write side. + */ + if (vcpu->kvm->mmu_notifier_seq != mmu_seq) + return 1; + return 0; +} +#endif + #endif diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 3735212cd3f8..7dd9b0b85e4e 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -192,6 +192,123 @@ void kvm_vcpu_uninit(struct kvm_vcpu *vcpu) } EXPORT_SYMBOL_GPL(kvm_vcpu_uninit); +#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER) +static inline struct kvm *mmu_notifier_to_kvm(struct mmu_notifier *mn) +{ + return container_of(mn, struct kvm, mmu_notifier); +} + +static void kvm_mmu_notifier_invalidate_page(struct mmu_notifier *mn, + struct mm_struct *mm, + unsigned long address) +{ + struct kvm *kvm = mmu_notifier_to_kvm(mn); + int need_tlb_flush; + + /* + * When ->invalidate_page runs, the linux pte has been zapped + * already but the page is still allocated until + * ->invalidate_page returns. So if we increase the sequence + * here the kvm page fault will notice if the spte can't be + * established because the page is going to be freed. If + * instead the kvm page fault establishes the spte before + * ->invalidate_page runs, kvm_unmap_hva will release it + * before returning. + * + * The sequence increase only need to be seen at spin_unlock + * time, and not at spin_lock time. + * + * Increasing the sequence after the spin_unlock would be + * unsafe because the kvm page fault could then establish the + * pte after kvm_unmap_hva returned, without noticing the page + * is going to be freed. + */ + spin_lock(&kvm->mmu_lock); + kvm->mmu_notifier_seq++; + need_tlb_flush = kvm_unmap_hva(kvm, address); + spin_unlock(&kvm->mmu_lock); + + /* we've to flush the tlb before the pages can be freed */ + if (need_tlb_flush) + kvm_flush_remote_tlbs(kvm); + +} + +static void kvm_mmu_notifier_invalidate_range_start(struct mmu_notifier *mn, + struct mm_struct *mm, + unsigned long start, + unsigned long end) +{ + struct kvm *kvm = mmu_notifier_to_kvm(mn); + int need_tlb_flush = 0; + + spin_lock(&kvm->mmu_lock); + /* + * The count increase must become visible at unlock time as no + * spte can be established without taking the mmu_lock and + * count is also read inside the mmu_lock critical section. + */ + kvm->mmu_notifier_count++; + for (; start < end; start += PAGE_SIZE) + need_tlb_flush |= kvm_unmap_hva(kvm, start); + spin_unlock(&kvm->mmu_lock); + + /* we've to flush the tlb before the pages can be freed */ + if (need_tlb_flush) + kvm_flush_remote_tlbs(kvm); +} + +static void kvm_mmu_notifier_invalidate_range_end(struct mmu_notifier *mn, + struct mm_struct *mm, + unsigned long start, + unsigned long end) +{ + struct kvm *kvm = mmu_notifier_to_kvm(mn); + + spin_lock(&kvm->mmu_lock); + /* + * This sequence increase will notify the kvm page fault that + * the page that is going to be mapped in the spte could have + * been freed. + */ + kvm->mmu_notifier_seq++; + /* + * The above sequence increase must be visible before the + * below count decrease but both values are read by the kvm + * page fault under mmu_lock spinlock so we don't need to add + * a smb_wmb() here in between the two. + */ + kvm->mmu_notifier_count--; + spin_unlock(&kvm->mmu_lock); + + BUG_ON(kvm->mmu_notifier_count < 0); +} + +static int kvm_mmu_notifier_clear_flush_young(struct mmu_notifier *mn, + struct mm_struct *mm, + unsigned long address) +{ + struct kvm *kvm = mmu_notifier_to_kvm(mn); + int young; + + spin_lock(&kvm->mmu_lock); + young = kvm_age_hva(kvm, address); + spin_unlock(&kvm->mmu_lock); + + if (young) + kvm_flush_remote_tlbs(kvm); + + return young; +} + +static const struct mmu_notifier_ops kvm_mmu_notifier_ops = { + .invalidate_page = kvm_mmu_notifier_invalidate_page, + .invalidate_range_start = kvm_mmu_notifier_invalidate_range_start, + .invalidate_range_end = kvm_mmu_notifier_invalidate_range_end, + .clear_flush_young = kvm_mmu_notifier_clear_flush_young, +}; +#endif /* CONFIG_MMU_NOTIFIER && KVM_ARCH_WANT_MMU_NOTIFIER */ + static struct kvm *kvm_create_vm(void) { struct kvm *kvm = kvm_arch_create_vm(); @@ -212,6 +329,21 @@ static struct kvm *kvm_create_vm(void) (struct kvm_coalesced_mmio_ring *)page_address(page); #endif +#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER) + { + int err; + kvm->mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->mmu_notifier, current->mm); + if (err) { +#ifdef KVM_COALESCED_MMIO_PAGE_OFFSET + put_page(page); +#endif + kfree(kvm); + return ERR_PTR(err); + } + } +#endif + kvm->mm = current->mm; atomic_inc(&kvm->mm->mm_count); spin_lock_init(&kvm->mmu_lock); @@ -271,6 +403,9 @@ static void kvm_destroy_vm(struct kvm *kvm) #ifdef KVM_COALESCED_MMIO_PAGE_OFFSET if (kvm->coalesced_mmio_ring != NULL) free_page((unsigned long)kvm->coalesced_mmio_ring); +#endif +#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER) + mmu_notifier_unregister(&kvm->mmu_notifier, kvm->mm); #endif kvm_arch_destroy_vm(kvm); mmdrop(mm); -- cgit v1.2.3 From ed8486243379ef3e6c61363df915882945c0eaec Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 29 Jul 2008 11:30:57 +0300 Subject: KVM: Advertise synchronized mmu support to userspace Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 1 + include/linux/kvm.h | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index c7b01efe0646..0d682fc6aeb3 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -883,6 +883,7 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_PIT: case KVM_CAP_NOP_IO_DELAY: case KVM_CAP_MP_STATE: + case KVM_CAP_SYNC_MMU: r = 1; break; case KVM_CAP_COALESCED_MMIO: diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 0ea064cbfbc8..69511f74f912 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -371,6 +371,7 @@ struct kvm_trace_rec { #define KVM_CAP_PV_MMU 13 #define KVM_CAP_MP_STATE 14 #define KVM_CAP_COALESCED_MMIO 15 +#define KVM_CAP_SYNC_MMU 16 /* Changes to host mmap are reflected in guest */ /* * ioctls for VM fds -- cgit v1.2.3 From a7b815169aae65072017efb1fba9dcecc82ba7c1 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sat, 26 Jul 2008 20:43:01 +0800 Subject: ALSA: sound/soc/pxa/tosa.c: removed duplicated include Removed duplicated include in sound/soc/pxa/tosa.c. Signed-off-by: Huang Weiyi Acked-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/soc/pxa/tosa.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c index fe6cca9c9e76..22971a0f040e 100644 --- a/sound/soc/pxa/tosa.c +++ b/sound/soc/pxa/tosa.c @@ -33,7 +33,6 @@ #include #include #include -#include #include "../codecs/wm9712.h" #include "pxa2xx-pcm.h" -- cgit v1.2.3 From be41e941d5f1a48bde7f44d09d56e8d2605f98e1 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 28 Jul 2008 17:04:39 -0500 Subject: ALSA: asoc: restrict sample rate and size in Freescale MPC8610 sound drivers The Freescale MPC8610 SSI device has the option of using one clock for both transmit and receive (synchronous mode), or independent clocks (asynchronous). The SSI driver, however, programs the SSI into synchronous mode and then tries to program the clock registers independently. The result is that the wrong sample size is usually generated during recording. This patch fixes the discrepancy by restricting the sample rate and sample size of the playback and capture streams. The SSI driver remembers which stream is opened first. When a second stream is opened, that stream is constrained to the same sample rate and size as the first stream. A future version of this driver will lift the sample size restriction. Supporting independent sample rates is more difficult, because only certain codecs provide dual independent clocks. Signed-off-by: Timur Tabi Signed-off-by: Takashi Iwai --- sound/soc/fsl/fsl_dma.c | 7 ++++- sound/soc/fsl/fsl_ssi.c | 74 ++++++++++++++++++++++++++++++++++++++++++------- 2 files changed, 70 insertions(+), 11 deletions(-) diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index da2bc5902864..7ceea2bba1f5 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -132,12 +132,17 @@ struct fsl_dma_private { * Since each link descriptor has a 32-bit byte count field, we set * period_bytes_max to the largest 32-bit number. We also have no maximum * number of periods. + * + * Note that we specify SNDRV_PCM_INFO_JOINT_DUPLEX here, but only because a + * limitation in the SSI driver requires the sample rates for playback and + * capture to be the same. */ static const struct snd_pcm_hardware fsl_dma_hardware = { .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_JOINT_DUPLEX, .formats = FSLDMA_PCM_FORMATS, .rates = FSLDMA_PCM_RATES, .rate_min = 5512, diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 71bff33f5528..157a7895ffa1 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -67,6 +67,8 @@ * @ssi: pointer to the SSI's registers * @ssi_phys: physical address of the SSI registers * @irq: IRQ of this SSI + * @first_stream: pointer to the stream that was opened first + * @second_stream: pointer to second stream * @dev: struct device pointer * @playback: the number of playback streams opened * @capture: the number of capture streams opened @@ -79,6 +81,8 @@ struct fsl_ssi_private { struct ccsr_ssi __iomem *ssi; dma_addr_t ssi_phys; unsigned int irq; + struct snd_pcm_substream *first_stream; + struct snd_pcm_substream *second_stream; struct device *dev; unsigned int playback; unsigned int capture; @@ -342,6 +346,49 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream) */ } + if (!ssi_private->first_stream) + ssi_private->first_stream = substream; + else { + /* This is the second stream open, so we need to impose sample + * rate and maybe sample size constraints. Note that this can + * cause a race condition if the second stream is opened before + * the first stream is fully initialized. + * + * We provide some protection by checking to make sure the first + * stream is initialized, but it's not perfect. ALSA sometimes + * re-initializes the driver with a different sample rate or + * size. If the second stream is opened before the first stream + * has received its final parameters, then the second stream may + * be constrained to the wrong sample rate or size. + * + * FIXME: This code does not handle opening and closing streams + * repeatedly. If you open two streams and then close the first + * one, you may not be able to open another stream until you + * close the second one as well. + */ + struct snd_pcm_runtime *first_runtime = + ssi_private->first_stream->runtime; + + if (!first_runtime->rate || !first_runtime->sample_bits) { + dev_err(substream->pcm->card->dev, + "set sample rate and size in %s stream first\n", + substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? "capture" : "playback"); + return -EAGAIN; + } + + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, + first_runtime->rate, first_runtime->rate); + + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_SAMPLE_BITS, + first_runtime->sample_bits, + first_runtime->sample_bits); + + ssi_private->second_stream = substream; + } + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ssi_private->playback++; @@ -371,18 +418,16 @@ static int fsl_ssi_prepare(struct snd_pcm_substream *substream) struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data; struct ccsr_ssi __iomem *ssi = ssi_private->ssi; - u32 wl; - wl = CCSR_SSI_SxCCR_WL(snd_pcm_format_width(runtime->format)); + if (substream == ssi_private->first_stream) { + u32 wl; - clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + /* The SSI should always be disabled at this points (SSIEN=0) */ + wl = CCSR_SSI_SxCCR_WL(snd_pcm_format_width(runtime->format)); - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + /* In synchronous mode, the SSI uses STCCR for capture */ clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl); - else - clrsetbits_be32(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl); - - setbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + } return 0; } @@ -407,9 +452,13 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - setbits32(&ssi->scr, CCSR_SSI_SCR_TE); + clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + setbits32(&ssi->scr, + CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE); } else { - setbits32(&ssi->scr, CCSR_SSI_SCR_RE); + clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + setbits32(&ssi->scr, + CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE); /* * I think we need this delay to allow time for the SSI @@ -452,6 +501,11 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream) if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) ssi_private->capture--; + if (ssi_private->first_stream == substream) + ssi_private->first_stream = ssi_private->second_stream; + + ssi_private->second_stream = NULL; + /* * If this is the last active substream, disable the SSI and release * the IRQ. -- cgit v1.2.3 From 877db3c1af24a65f78ae865b1fb642165e065a8b Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Tue, 29 Jul 2008 11:42:22 +0100 Subject: ALSA: ASoC: Update Poodle to current ASoC API Signed-off-by: Dmitry Baryshkov Cc: Richard Purdie Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/soc/pxa/poodle.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index 65a4e9a8c39e..d968cf71b569 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -85,17 +85,13 @@ static int poodle_startup(struct snd_pcm_substream *substream) } /* we need to unmute the HP at shutdown as the mute burns power on poodle */ -static int poodle_shutdown(struct snd_pcm_substream *substream) +static void poodle_shutdown(struct snd_pcm_substream *substream) { - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_codec *codec = rtd->socdev->codec; - /* set = unmute headphone */ locomo_gpio_write(&poodle_locomo_device.dev, POODLE_LOCOMO_GPIO_MUTE_L, 1); locomo_gpio_write(&poodle_locomo_device.dev, POODLE_LOCOMO_GPIO_MUTE_R, 1); - return 0; } static int poodle_hw_params(struct snd_pcm_substream *substream, @@ -232,7 +228,7 @@ static const struct soc_enum poodle_enum[] = { SOC_ENUM_SINGLE_EXT(2, spk_function), }; -static const snd_kcontrol_new_t wm8731_poodle_controls[] = { +static const struct snd_kcontrol_new wm8731_poodle_controls[] = { SOC_ENUM_EXT("Jack Function", poodle_enum[0], poodle_get_jack, poodle_set_jack), SOC_ENUM_EXT("Speaker Function", poodle_enum[1], poodle_get_spk, -- cgit v1.2.3 From f42b7e3dbe1e2c004a47aa89f09137ee5f04499d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 20:12:51 +0900 Subject: sh: Add ARCH_DEFCONFIG entries for sh and sh64. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 7bfb0d219d67..81eaa4b72f4a 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -23,6 +23,11 @@ config SUPERH32 config SUPERH64 def_bool y if CPU_SH5 +config ARCH_DEFCONFIG + string + default "arch/sh/configs/shx3_defconfig" if SUPERH32 + default "arch/sh/configs/cayman_defconfig" if SUPERH64 + config RWSEM_GENERIC_SPINLOCK def_bool y -- cgit v1.2.3 From cfb81f361a3e73bb4eb7207a88f720e2f652dd63 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 20:19:43 +0900 Subject: sh: Switch KBUILD_DEFCONFIG to shx3_defconfig. Signed-off-by: Paul Mundt --- arch/sh/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/Makefile b/arch/sh/Makefile index fbf875628312..f2b07b54c912 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -68,7 +68,7 @@ OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \ defaultimage-$(CONFIG_SUPERH32) := zImage # Set some sensible Kbuild defaults -KBUILD_DEFCONFIG := r7780mp_defconfig +KBUILD_DEFCONFIG := shx3_defconfig KBUILD_IMAGE := $(defaultimage-y) # -- cgit v1.2.3 From 71b8064e7df5698520d73b4c1566a3dbc98eb9ef Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 20:20:36 +0900 Subject: sh: dma-sh: Fix up dreamcast dma.h mach path. Signed-off-by: Paul Mundt --- arch/sh/drivers/dma/dma-sh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index bd305483c144..b2ffe649c7c0 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include "dma-sh.h" -- cgit v1.2.3 From da2014a2b080e7f3024a4eb6917d47069ad9620b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 21:01:19 +0900 Subject: sh: Shuffle the board directories in to mach groups. This flattens out the board directories in to individual mach groups, we will use this for getting rid of unneeded directories, simplifying the build system, and becoming more coherent with the refactored arch/sh/include topology. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 10 +- arch/sh/Makefile | 60 +-- arch/sh/boards/cayman/Makefile | 5 - arch/sh/boards/cayman/irq.c | 197 ---------- arch/sh/boards/cayman/led.c | 51 --- arch/sh/boards/cayman/setup.c | 187 ---------- arch/sh/boards/dreamcast/Makefile | 6 - arch/sh/boards/dreamcast/irq.c | 153 -------- arch/sh/boards/dreamcast/rtc.c | 81 ----- arch/sh/boards/dreamcast/setup.c | 64 ---- arch/sh/boards/hp6xx/Makefile | 7 - arch/sh/boards/hp6xx/hp6xx_apm.c | 111 ------ arch/sh/boards/hp6xx/pm.c | 81 ----- arch/sh/boards/hp6xx/pm_wakeup.S | 58 --- arch/sh/boards/hp6xx/setup.c | 121 ------- arch/sh/boards/landisk/Makefile | 5 - arch/sh/boards/landisk/gio.c | 171 --------- arch/sh/boards/landisk/irq.c | 56 --- arch/sh/boards/landisk/psw.c | 143 -------- arch/sh/boards/landisk/setup.c | 105 ------ arch/sh/boards/lboxre2/Makefile | 5 - arch/sh/boards/lboxre2/irq.c | 31 -- arch/sh/boards/lboxre2/setup.c | 84 ----- arch/sh/boards/mach-ap325rxa/Makefile | 1 + arch/sh/boards/mach-ap325rxa/setup.c | 313 ++++++++++++++++ arch/sh/boards/mach-cayman/Makefile | 5 + arch/sh/boards/mach-cayman/irq.c | 197 ++++++++++ arch/sh/boards/mach-cayman/led.c | 51 +++ arch/sh/boards/mach-cayman/setup.c | 187 ++++++++++ arch/sh/boards/mach-dreamcast/Makefile | 6 + arch/sh/boards/mach-dreamcast/irq.c | 153 ++++++++ arch/sh/boards/mach-dreamcast/rtc.c | 81 +++++ arch/sh/boards/mach-dreamcast/setup.c | 64 ++++ arch/sh/boards/mach-edosk7705/Makefile | 6 + arch/sh/boards/mach-edosk7705/io.c | 94 +++++ arch/sh/boards/mach-edosk7705/setup.c | 43 +++ arch/sh/boards/mach-highlander/Kconfig | 24 ++ arch/sh/boards/mach-highlander/Makefile | 11 + arch/sh/boards/mach-highlander/irq-r7780mp.c | 74 ++++ arch/sh/boards/mach-highlander/irq-r7780rp.c | 67 ++++ arch/sh/boards/mach-highlander/irq-r7785rp.c | 86 +++++ arch/sh/boards/mach-highlander/psw.c | 122 +++++++ arch/sh/boards/mach-highlander/setup.c | 345 ++++++++++++++++++ arch/sh/boards/mach-hp6xx/Makefile | 7 + arch/sh/boards/mach-hp6xx/hp6xx_apm.c | 111 ++++++ arch/sh/boards/mach-hp6xx/pm.c | 81 +++++ arch/sh/boards/mach-hp6xx/pm_wakeup.S | 58 +++ arch/sh/boards/mach-hp6xx/setup.c | 121 +++++++ arch/sh/boards/mach-landisk/Makefile | 5 + arch/sh/boards/mach-landisk/gio.c | 171 +++++++++ arch/sh/boards/mach-landisk/irq.c | 56 +++ arch/sh/boards/mach-landisk/psw.c | 143 ++++++++ arch/sh/boards/mach-landisk/setup.c | 105 ++++++ arch/sh/boards/mach-lboxre2/Makefile | 5 + arch/sh/boards/mach-lboxre2/irq.c | 31 ++ arch/sh/boards/mach-lboxre2/setup.c | 84 +++++ arch/sh/boards/mach-magicpanelr2/Kconfig | 13 + arch/sh/boards/mach-magicpanelr2/Makefile | 5 + arch/sh/boards/mach-magicpanelr2/setup.c | 394 ++++++++++++++++++++ arch/sh/boards/mach-microdev/Makefile | 8 + arch/sh/boards/mach-microdev/io.c | 367 +++++++++++++++++++ arch/sh/boards/mach-microdev/irq.c | 183 ++++++++++ arch/sh/boards/mach-microdev/led.c | 101 ++++++ arch/sh/boards/mach-microdev/setup.c | 405 +++++++++++++++++++++ arch/sh/boards/mach-migor/Kconfig | 15 + arch/sh/boards/mach-migor/Makefile | 2 + arch/sh/boards/mach-migor/lcd_qvga.c | 165 +++++++++ arch/sh/boards/mach-migor/setup.c | 523 +++++++++++++++++++++++++++ arch/sh/boards/mach-r2d/Kconfig | 23 ++ arch/sh/boards/mach-r2d/Makefile | 5 + arch/sh/boards/mach-r2d/irq.c | 155 ++++++++ arch/sh/boards/mach-r2d/setup.c | 258 +++++++++++++ arch/sh/boards/mach-rsk7203/Makefile | 1 + arch/sh/boards/mach-rsk7203/setup.c | 136 +++++++ arch/sh/boards/mach-sdk7780/Kconfig | 16 + arch/sh/boards/mach-sdk7780/Makefile | 5 + arch/sh/boards/mach-sdk7780/irq.c | 46 +++ arch/sh/boards/mach-sdk7780/setup.c | 109 ++++++ arch/sh/boards/mach-se/7206/Makefile | 5 + arch/sh/boards/mach-se/7206/io.c | 104 ++++++ arch/sh/boards/mach-se/7206/irq.c | 146 ++++++++ arch/sh/boards/mach-se/7206/setup.c | 108 ++++++ arch/sh/boards/mach-se/7343/Makefile | 5 + arch/sh/boards/mach-se/7343/io.c | 273 ++++++++++++++ arch/sh/boards/mach-se/7343/irq.c | 80 ++++ arch/sh/boards/mach-se/7343/setup.c | 152 ++++++++ arch/sh/boards/mach-se/7619/Makefile | 5 + arch/sh/boards/mach-se/7619/setup.c | 21 ++ arch/sh/boards/mach-se/770x/Makefile | 5 + arch/sh/boards/mach-se/770x/io.c | 156 ++++++++ arch/sh/boards/mach-se/770x/irq.c | 108 ++++++ arch/sh/boards/mach-se/770x/setup.c | 222 ++++++++++++ arch/sh/boards/mach-se/7721/Makefile | 1 + arch/sh/boards/mach-se/7721/irq.c | 45 +++ arch/sh/boards/mach-se/7721/setup.c | 99 +++++ arch/sh/boards/mach-se/7722/Makefile | 10 + arch/sh/boards/mach-se/7722/irq.c | 76 ++++ arch/sh/boards/mach-se/7722/setup.c | 194 ++++++++++ arch/sh/boards/mach-se/7751/Makefile | 7 + arch/sh/boards/mach-se/7751/io.c | 135 +++++++ arch/sh/boards/mach-se/7751/irq.c | 50 +++ arch/sh/boards/mach-se/7751/pci.c | 147 ++++++++ arch/sh/boards/mach-se/7751/setup.c | 78 ++++ arch/sh/boards/mach-se/7780/Makefile | 10 + arch/sh/boards/mach-se/7780/irq.c | 46 +++ arch/sh/boards/mach-se/7780/setup.c | 124 +++++++ arch/sh/boards/mach-sh03/Makefile | 5 + arch/sh/boards/mach-sh03/rtc.c | 132 +++++++ arch/sh/boards/mach-sh03/setup.c | 75 ++++ arch/sh/boards/mach-sh7763rdp/Makefile | 1 + arch/sh/boards/mach-sh7763rdp/irq.c | 45 +++ arch/sh/boards/mach-sh7763rdp/setup.c | 128 +++++++ arch/sh/boards/mach-sh7785lcr/Makefile | 1 + arch/sh/boards/mach-sh7785lcr/setup.c | 302 ++++++++++++++++ arch/sh/boards/mach-shmin/Makefile | 5 + arch/sh/boards/mach-shmin/setup.c | 42 +++ arch/sh/boards/mach-snapgear/Makefile | 5 + arch/sh/boards/mach-snapgear/io.c | 137 +++++++ arch/sh/boards/mach-snapgear/setup.c | 95 +++++ arch/sh/boards/mach-systemh/Makefile | 13 + arch/sh/boards/mach-systemh/io.c | 174 +++++++++ arch/sh/boards/mach-systemh/irq.c | 102 ++++++ arch/sh/boards/mach-systemh/setup.c | 57 +++ arch/sh/boards/mach-titan/Makefile | 5 + arch/sh/boards/mach-titan/io.c | 126 +++++++ arch/sh/boards/mach-titan/setup.c | 44 +++ arch/sh/boards/mach-x3proto/Makefile | 1 + arch/sh/boards/mach-x3proto/ilsel.c | 151 ++++++++ arch/sh/boards/mach-x3proto/setup.c | 136 +++++++ arch/sh/boards/magicpanelr2/Kconfig | 13 - arch/sh/boards/magicpanelr2/Makefile | 5 - arch/sh/boards/magicpanelr2/setup.c | 394 -------------------- arch/sh/boards/renesas/ap325rxa/Makefile | 1 - arch/sh/boards/renesas/ap325rxa/setup.c | 313 ---------------- arch/sh/boards/renesas/edosk7705/Makefile | 6 - arch/sh/boards/renesas/edosk7705/io.c | 94 ----- arch/sh/boards/renesas/edosk7705/setup.c | 43 --- arch/sh/boards/renesas/migor/Kconfig | 15 - arch/sh/boards/renesas/migor/Makefile | 2 - arch/sh/boards/renesas/migor/lcd_qvga.c | 165 --------- arch/sh/boards/renesas/migor/setup.c | 523 --------------------------- arch/sh/boards/renesas/r7780rp/Kconfig | 24 -- arch/sh/boards/renesas/r7780rp/Makefile | 11 - arch/sh/boards/renesas/r7780rp/irq-r7780mp.c | 74 ---- arch/sh/boards/renesas/r7780rp/irq-r7780rp.c | 67 ---- arch/sh/boards/renesas/r7780rp/irq-r7785rp.c | 86 ----- arch/sh/boards/renesas/r7780rp/psw.c | 122 ------- arch/sh/boards/renesas/r7780rp/setup.c | 345 ------------------ arch/sh/boards/renesas/rsk7203/Makefile | 1 - arch/sh/boards/renesas/rsk7203/setup.c | 136 ------- arch/sh/boards/renesas/rts7751r2d/Kconfig | 23 -- arch/sh/boards/renesas/rts7751r2d/Makefile | 5 - arch/sh/boards/renesas/rts7751r2d/irq.c | 155 -------- arch/sh/boards/renesas/rts7751r2d/setup.c | 258 ------------- arch/sh/boards/renesas/sdk7780/Kconfig | 16 - arch/sh/boards/renesas/sdk7780/Makefile | 5 - arch/sh/boards/renesas/sdk7780/irq.c | 46 --- arch/sh/boards/renesas/sdk7780/setup.c | 109 ------ arch/sh/boards/renesas/sh7763rdp/Makefile | 1 - arch/sh/boards/renesas/sh7763rdp/irq.c | 45 --- arch/sh/boards/renesas/sh7763rdp/setup.c | 128 ------- arch/sh/boards/renesas/sh7785lcr/Makefile | 1 - arch/sh/boards/renesas/sh7785lcr/setup.c | 302 ---------------- arch/sh/boards/renesas/systemh/Makefile | 13 - arch/sh/boards/renesas/systemh/io.c | 174 --------- arch/sh/boards/renesas/systemh/irq.c | 102 ------ arch/sh/boards/renesas/systemh/setup.c | 57 --- arch/sh/boards/renesas/x3proto/Makefile | 1 - arch/sh/boards/renesas/x3proto/ilsel.c | 151 -------- arch/sh/boards/renesas/x3proto/setup.c | 136 ------- arch/sh/boards/se/7206/Makefile | 5 - arch/sh/boards/se/7206/io.c | 104 ------ arch/sh/boards/se/7206/irq.c | 146 -------- arch/sh/boards/se/7206/setup.c | 108 ------ arch/sh/boards/se/7343/Makefile | 5 - arch/sh/boards/se/7343/io.c | 273 -------------- arch/sh/boards/se/7343/irq.c | 80 ---- arch/sh/boards/se/7343/setup.c | 152 -------- arch/sh/boards/se/7619/Makefile | 5 - arch/sh/boards/se/7619/setup.c | 21 -- arch/sh/boards/se/770x/Makefile | 5 - arch/sh/boards/se/770x/io.c | 156 -------- arch/sh/boards/se/770x/irq.c | 108 ------ arch/sh/boards/se/770x/setup.c | 222 ------------ arch/sh/boards/se/7721/Makefile | 1 - arch/sh/boards/se/7721/irq.c | 45 --- arch/sh/boards/se/7721/setup.c | 99 ----- arch/sh/boards/se/7722/Makefile | 10 - arch/sh/boards/se/7722/irq.c | 76 ---- arch/sh/boards/se/7722/setup.c | 194 ---------- arch/sh/boards/se/7751/Makefile | 7 - arch/sh/boards/se/7751/io.c | 135 ------- arch/sh/boards/se/7751/irq.c | 50 --- arch/sh/boards/se/7751/pci.c | 147 -------- arch/sh/boards/se/7751/setup.c | 78 ---- arch/sh/boards/se/7780/Makefile | 10 - arch/sh/boards/se/7780/irq.c | 46 --- arch/sh/boards/se/7780/setup.c | 124 ------- arch/sh/boards/sh03/Makefile | 5 - arch/sh/boards/sh03/rtc.c | 132 ------- arch/sh/boards/sh03/setup.c | 75 ---- arch/sh/boards/shmin/Makefile | 5 - arch/sh/boards/shmin/setup.c | 42 --- arch/sh/boards/snapgear/Makefile | 5 - arch/sh/boards/snapgear/io.c | 137 ------- arch/sh/boards/snapgear/setup.c | 95 ----- arch/sh/boards/superh/microdev/Makefile | 8 - arch/sh/boards/superh/microdev/io.c | 367 ------------------- arch/sh/boards/superh/microdev/irq.c | 183 ---------- arch/sh/boards/superh/microdev/led.c | 101 ------ arch/sh/boards/superh/microdev/setup.c | 405 --------------------- arch/sh/boards/titan/Makefile | 5 - arch/sh/boards/titan/io.c | 126 ------- arch/sh/boards/titan/setup.c | 44 --- 214 files changed, 10072 insertions(+), 10072 deletions(-) delete mode 100644 arch/sh/boards/cayman/Makefile delete mode 100644 arch/sh/boards/cayman/irq.c delete mode 100644 arch/sh/boards/cayman/led.c delete mode 100644 arch/sh/boards/cayman/setup.c delete mode 100644 arch/sh/boards/dreamcast/Makefile delete mode 100644 arch/sh/boards/dreamcast/irq.c delete mode 100644 arch/sh/boards/dreamcast/rtc.c delete mode 100644 arch/sh/boards/dreamcast/setup.c delete mode 100644 arch/sh/boards/hp6xx/Makefile delete mode 100644 arch/sh/boards/hp6xx/hp6xx_apm.c delete mode 100644 arch/sh/boards/hp6xx/pm.c delete mode 100644 arch/sh/boards/hp6xx/pm_wakeup.S delete mode 100644 arch/sh/boards/hp6xx/setup.c delete mode 100644 arch/sh/boards/landisk/Makefile delete mode 100644 arch/sh/boards/landisk/gio.c delete mode 100644 arch/sh/boards/landisk/irq.c delete mode 100644 arch/sh/boards/landisk/psw.c delete mode 100644 arch/sh/boards/landisk/setup.c delete mode 100644 arch/sh/boards/lboxre2/Makefile delete mode 100644 arch/sh/boards/lboxre2/irq.c delete mode 100644 arch/sh/boards/lboxre2/setup.c create mode 100644 arch/sh/boards/mach-ap325rxa/Makefile create mode 100644 arch/sh/boards/mach-ap325rxa/setup.c create mode 100644 arch/sh/boards/mach-cayman/Makefile create mode 100644 arch/sh/boards/mach-cayman/irq.c create mode 100644 arch/sh/boards/mach-cayman/led.c create mode 100644 arch/sh/boards/mach-cayman/setup.c create mode 100644 arch/sh/boards/mach-dreamcast/Makefile create mode 100644 arch/sh/boards/mach-dreamcast/irq.c create mode 100644 arch/sh/boards/mach-dreamcast/rtc.c create mode 100644 arch/sh/boards/mach-dreamcast/setup.c create mode 100644 arch/sh/boards/mach-edosk7705/Makefile create mode 100644 arch/sh/boards/mach-edosk7705/io.c create mode 100644 arch/sh/boards/mach-edosk7705/setup.c create mode 100644 arch/sh/boards/mach-highlander/Kconfig create mode 100644 arch/sh/boards/mach-highlander/Makefile create mode 100644 arch/sh/boards/mach-highlander/irq-r7780mp.c create mode 100644 arch/sh/boards/mach-highlander/irq-r7780rp.c create mode 100644 arch/sh/boards/mach-highlander/irq-r7785rp.c create mode 100644 arch/sh/boards/mach-highlander/psw.c create mode 100644 arch/sh/boards/mach-highlander/setup.c create mode 100644 arch/sh/boards/mach-hp6xx/Makefile create mode 100644 arch/sh/boards/mach-hp6xx/hp6xx_apm.c create mode 100644 arch/sh/boards/mach-hp6xx/pm.c create mode 100644 arch/sh/boards/mach-hp6xx/pm_wakeup.S create mode 100644 arch/sh/boards/mach-hp6xx/setup.c create mode 100644 arch/sh/boards/mach-landisk/Makefile create mode 100644 arch/sh/boards/mach-landisk/gio.c create mode 100644 arch/sh/boards/mach-landisk/irq.c create mode 100644 arch/sh/boards/mach-landisk/psw.c create mode 100644 arch/sh/boards/mach-landisk/setup.c create mode 100644 arch/sh/boards/mach-lboxre2/Makefile create mode 100644 arch/sh/boards/mach-lboxre2/irq.c create mode 100644 arch/sh/boards/mach-lboxre2/setup.c create mode 100644 arch/sh/boards/mach-magicpanelr2/Kconfig create mode 100644 arch/sh/boards/mach-magicpanelr2/Makefile create mode 100644 arch/sh/boards/mach-magicpanelr2/setup.c create mode 100644 arch/sh/boards/mach-microdev/Makefile create mode 100644 arch/sh/boards/mach-microdev/io.c create mode 100644 arch/sh/boards/mach-microdev/irq.c create mode 100644 arch/sh/boards/mach-microdev/led.c create mode 100644 arch/sh/boards/mach-microdev/setup.c create mode 100644 arch/sh/boards/mach-migor/Kconfig create mode 100644 arch/sh/boards/mach-migor/Makefile create mode 100644 arch/sh/boards/mach-migor/lcd_qvga.c create mode 100644 arch/sh/boards/mach-migor/setup.c create mode 100644 arch/sh/boards/mach-r2d/Kconfig create mode 100644 arch/sh/boards/mach-r2d/Makefile create mode 100644 arch/sh/boards/mach-r2d/irq.c create mode 100644 arch/sh/boards/mach-r2d/setup.c create mode 100644 arch/sh/boards/mach-rsk7203/Makefile create mode 100644 arch/sh/boards/mach-rsk7203/setup.c create mode 100644 arch/sh/boards/mach-sdk7780/Kconfig create mode 100644 arch/sh/boards/mach-sdk7780/Makefile create mode 100644 arch/sh/boards/mach-sdk7780/irq.c create mode 100644 arch/sh/boards/mach-sdk7780/setup.c create mode 100644 arch/sh/boards/mach-se/7206/Makefile create mode 100644 arch/sh/boards/mach-se/7206/io.c create mode 100644 arch/sh/boards/mach-se/7206/irq.c create mode 100644 arch/sh/boards/mach-se/7206/setup.c create mode 100644 arch/sh/boards/mach-se/7343/Makefile create mode 100644 arch/sh/boards/mach-se/7343/io.c create mode 100644 arch/sh/boards/mach-se/7343/irq.c create mode 100644 arch/sh/boards/mach-se/7343/setup.c create mode 100644 arch/sh/boards/mach-se/7619/Makefile create mode 100644 arch/sh/boards/mach-se/7619/setup.c create mode 100644 arch/sh/boards/mach-se/770x/Makefile create mode 100644 arch/sh/boards/mach-se/770x/io.c create mode 100644 arch/sh/boards/mach-se/770x/irq.c create mode 100644 arch/sh/boards/mach-se/770x/setup.c create mode 100644 arch/sh/boards/mach-se/7721/Makefile create mode 100644 arch/sh/boards/mach-se/7721/irq.c create mode 100644 arch/sh/boards/mach-se/7721/setup.c create mode 100644 arch/sh/boards/mach-se/7722/Makefile create mode 100644 arch/sh/boards/mach-se/7722/irq.c create mode 100644 arch/sh/boards/mach-se/7722/setup.c create mode 100644 arch/sh/boards/mach-se/7751/Makefile create mode 100644 arch/sh/boards/mach-se/7751/io.c create mode 100644 arch/sh/boards/mach-se/7751/irq.c create mode 100644 arch/sh/boards/mach-se/7751/pci.c create mode 100644 arch/sh/boards/mach-se/7751/setup.c create mode 100644 arch/sh/boards/mach-se/7780/Makefile create mode 100644 arch/sh/boards/mach-se/7780/irq.c create mode 100644 arch/sh/boards/mach-se/7780/setup.c create mode 100644 arch/sh/boards/mach-sh03/Makefile create mode 100644 arch/sh/boards/mach-sh03/rtc.c create mode 100644 arch/sh/boards/mach-sh03/setup.c create mode 100644 arch/sh/boards/mach-sh7763rdp/Makefile create mode 100644 arch/sh/boards/mach-sh7763rdp/irq.c create mode 100644 arch/sh/boards/mach-sh7763rdp/setup.c create mode 100644 arch/sh/boards/mach-sh7785lcr/Makefile create mode 100644 arch/sh/boards/mach-sh7785lcr/setup.c create mode 100644 arch/sh/boards/mach-shmin/Makefile create mode 100644 arch/sh/boards/mach-shmin/setup.c create mode 100644 arch/sh/boards/mach-snapgear/Makefile create mode 100644 arch/sh/boards/mach-snapgear/io.c create mode 100644 arch/sh/boards/mach-snapgear/setup.c create mode 100644 arch/sh/boards/mach-systemh/Makefile create mode 100644 arch/sh/boards/mach-systemh/io.c create mode 100644 arch/sh/boards/mach-systemh/irq.c create mode 100644 arch/sh/boards/mach-systemh/setup.c create mode 100644 arch/sh/boards/mach-titan/Makefile create mode 100644 arch/sh/boards/mach-titan/io.c create mode 100644 arch/sh/boards/mach-titan/setup.c create mode 100644 arch/sh/boards/mach-x3proto/Makefile create mode 100644 arch/sh/boards/mach-x3proto/ilsel.c create mode 100644 arch/sh/boards/mach-x3proto/setup.c delete mode 100644 arch/sh/boards/magicpanelr2/Kconfig delete mode 100644 arch/sh/boards/magicpanelr2/Makefile delete mode 100644 arch/sh/boards/magicpanelr2/setup.c delete mode 100644 arch/sh/boards/renesas/ap325rxa/Makefile delete mode 100644 arch/sh/boards/renesas/ap325rxa/setup.c delete mode 100644 arch/sh/boards/renesas/edosk7705/Makefile delete mode 100644 arch/sh/boards/renesas/edosk7705/io.c delete mode 100644 arch/sh/boards/renesas/edosk7705/setup.c delete mode 100644 arch/sh/boards/renesas/migor/Kconfig delete mode 100644 arch/sh/boards/renesas/migor/Makefile delete mode 100644 arch/sh/boards/renesas/migor/lcd_qvga.c delete mode 100644 arch/sh/boards/renesas/migor/setup.c delete mode 100644 arch/sh/boards/renesas/r7780rp/Kconfig delete mode 100644 arch/sh/boards/renesas/r7780rp/Makefile delete mode 100644 arch/sh/boards/renesas/r7780rp/irq-r7780mp.c delete mode 100644 arch/sh/boards/renesas/r7780rp/irq-r7780rp.c delete mode 100644 arch/sh/boards/renesas/r7780rp/irq-r7785rp.c delete mode 100644 arch/sh/boards/renesas/r7780rp/psw.c delete mode 100644 arch/sh/boards/renesas/r7780rp/setup.c delete mode 100644 arch/sh/boards/renesas/rsk7203/Makefile delete mode 100644 arch/sh/boards/renesas/rsk7203/setup.c delete mode 100644 arch/sh/boards/renesas/rts7751r2d/Kconfig delete mode 100644 arch/sh/boards/renesas/rts7751r2d/Makefile delete mode 100644 arch/sh/boards/renesas/rts7751r2d/irq.c delete mode 100644 arch/sh/boards/renesas/rts7751r2d/setup.c delete mode 100644 arch/sh/boards/renesas/sdk7780/Kconfig delete mode 100644 arch/sh/boards/renesas/sdk7780/Makefile delete mode 100644 arch/sh/boards/renesas/sdk7780/irq.c delete mode 100644 arch/sh/boards/renesas/sdk7780/setup.c delete mode 100644 arch/sh/boards/renesas/sh7763rdp/Makefile delete mode 100644 arch/sh/boards/renesas/sh7763rdp/irq.c delete mode 100644 arch/sh/boards/renesas/sh7763rdp/setup.c delete mode 100644 arch/sh/boards/renesas/sh7785lcr/Makefile delete mode 100644 arch/sh/boards/renesas/sh7785lcr/setup.c delete mode 100644 arch/sh/boards/renesas/systemh/Makefile delete mode 100644 arch/sh/boards/renesas/systemh/io.c delete mode 100644 arch/sh/boards/renesas/systemh/irq.c delete mode 100644 arch/sh/boards/renesas/systemh/setup.c delete mode 100644 arch/sh/boards/renesas/x3proto/Makefile delete mode 100644 arch/sh/boards/renesas/x3proto/ilsel.c delete mode 100644 arch/sh/boards/renesas/x3proto/setup.c delete mode 100644 arch/sh/boards/se/7206/Makefile delete mode 100644 arch/sh/boards/se/7206/io.c delete mode 100644 arch/sh/boards/se/7206/irq.c delete mode 100644 arch/sh/boards/se/7206/setup.c delete mode 100644 arch/sh/boards/se/7343/Makefile delete mode 100644 arch/sh/boards/se/7343/io.c delete mode 100644 arch/sh/boards/se/7343/irq.c delete mode 100644 arch/sh/boards/se/7343/setup.c delete mode 100644 arch/sh/boards/se/7619/Makefile delete mode 100644 arch/sh/boards/se/7619/setup.c delete mode 100644 arch/sh/boards/se/770x/Makefile delete mode 100644 arch/sh/boards/se/770x/io.c delete mode 100644 arch/sh/boards/se/770x/irq.c delete mode 100644 arch/sh/boards/se/770x/setup.c delete mode 100644 arch/sh/boards/se/7721/Makefile delete mode 100644 arch/sh/boards/se/7721/irq.c delete mode 100644 arch/sh/boards/se/7721/setup.c delete mode 100644 arch/sh/boards/se/7722/Makefile delete mode 100644 arch/sh/boards/se/7722/irq.c delete mode 100644 arch/sh/boards/se/7722/setup.c delete mode 100644 arch/sh/boards/se/7751/Makefile delete mode 100644 arch/sh/boards/se/7751/io.c delete mode 100644 arch/sh/boards/se/7751/irq.c delete mode 100644 arch/sh/boards/se/7751/pci.c delete mode 100644 arch/sh/boards/se/7751/setup.c delete mode 100644 arch/sh/boards/se/7780/Makefile delete mode 100644 arch/sh/boards/se/7780/irq.c delete mode 100644 arch/sh/boards/se/7780/setup.c delete mode 100644 arch/sh/boards/sh03/Makefile delete mode 100644 arch/sh/boards/sh03/rtc.c delete mode 100644 arch/sh/boards/sh03/setup.c delete mode 100644 arch/sh/boards/shmin/Makefile delete mode 100644 arch/sh/boards/shmin/setup.c delete mode 100644 arch/sh/boards/snapgear/Makefile delete mode 100644 arch/sh/boards/snapgear/io.c delete mode 100644 arch/sh/boards/snapgear/setup.c delete mode 100644 arch/sh/boards/superh/microdev/Makefile delete mode 100644 arch/sh/boards/superh/microdev/io.c delete mode 100644 arch/sh/boards/superh/microdev/irq.c delete mode 100644 arch/sh/boards/superh/microdev/led.c delete mode 100644 arch/sh/boards/superh/microdev/setup.c delete mode 100644 arch/sh/boards/titan/Makefile delete mode 100644 arch/sh/boards/titan/io.c delete mode 100644 arch/sh/boards/titan/setup.c diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 81eaa4b72f4a..83d170ccb0f8 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -594,11 +594,11 @@ config SH_CAYMAN endmenu -source "arch/sh/boards/renesas/rts7751r2d/Kconfig" -source "arch/sh/boards/renesas/r7780rp/Kconfig" -source "arch/sh/boards/renesas/sdk7780/Kconfig" -source "arch/sh/boards/renesas/migor/Kconfig" -source "arch/sh/boards/magicpanelr2/Kconfig" +source "arch/sh/boards/mach-r2d/Kconfig" +source "arch/sh/boards/mach-highlander/Kconfig" +source "arch/sh/boards/mach-sdk7780/Kconfig" +source "arch/sh/boards/mach-migor/Kconfig" +source "arch/sh/boards/mach-magicpanelr2/Kconfig" menu "Timer and clock configuration" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index f2b07b54c912..47bbfd8ae664 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -102,36 +102,36 @@ core-y += arch/sh/kernel/ arch/sh/mm/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ # Boards -machdir-$(CONFIG_SH_SOLUTION_ENGINE) += se/770x -machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722 -machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751 -machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780 -machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343 -machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += se/7721 -machdir-$(CONFIG_SH_HP6XX) += hp6xx -machdir-$(CONFIG_SH_DREAMCAST) += dreamcast -machdir-$(CONFIG_SH_SH03) += sh03 -machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear -machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d -machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh -machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705 -machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp -machdir-$(CONFIG_SH_MIGOR) += renesas/migor -machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780 -machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto -machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203 -machdir-$(CONFIG_SH_AP325RXA) += renesas/ap325rxa -machdir-$(CONFIG_SH_SH7763RDP) += renesas/sh7763rdp -machdir-$(CONFIG_SH_SH7785LCR) += renesas/sh7785lcr -machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev -machdir-$(CONFIG_SH_LANDISK) += landisk -machdir-$(CONFIG_SH_TITAN) += titan -machdir-$(CONFIG_SH_SHMIN) += shmin -machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += se/7206 -machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += se/7619 -machdir-$(CONFIG_SH_LBOX_RE2) += lboxre2 -machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += magicpanelr2 -machdir-$(CONFIG_SH_CAYMAN) += cayman +machdir-$(CONFIG_SH_SOLUTION_ENGINE) += mach-se/770x +machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += mach-se/7206 +machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += mach-se/7619 +machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += mach-se/7722 +machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += mach-se/7751 +machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += mach-se/7780 +machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += mach-se/7343 +machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += mach-se/7721 +machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx +machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast +machdir-$(CONFIG_SH_SH03) += mach-sh03 +machdir-$(CONFIG_SH_SECUREEDGE5410) += mach-snapgear +machdir-$(CONFIG_SH_RTS7751R2D) += mach-r2d +machdir-$(CONFIG_SH_7751_SYSTEMH) += mach-systemh +machdir-$(CONFIG_SH_EDOSK7705) += mach-edosk7705 +machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander +machdir-$(CONFIG_SH_MIGOR) += mach-migor +machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780 +machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto +machdir-$(CONFIG_SH_RSK7203) += mach-rsk7203 +machdir-$(CONFIG_SH_AP325RXA) += mach-ap325rxa +machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp +machdir-$(CONFIG_SH_SH7785LCR) += mach-sh7785lcr +machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev +machdir-$(CONFIG_SH_LANDISK) += mach-landisk +machdir-$(CONFIG_SH_TITAN) += mach-titan +machdir-$(CONFIG_SH_SHMIN) += mach-shmin +machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2 +machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += mach-magicpanelr2 +machdir-$(CONFIG_SH_CAYMAN) += mach-cayman incdir-y := $(notdir $(machdir-y)) diff --git a/arch/sh/boards/cayman/Makefile b/arch/sh/boards/cayman/Makefile deleted file mode 100644 index 489a8f867368..000000000000 --- a/arch/sh/boards/cayman/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Hitachi Cayman specific parts of the kernel -# -obj-y := setup.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/cayman/irq.c deleted file mode 100644 index ceb37ae92c70..000000000000 --- a/arch/sh/boards/cayman/irq.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support - * - * This file handles the board specific parts of the Cayman interrupt system - * - * Copyright (C) 2002 Stuart Menefy - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include - -/* Setup for the SMSC FDC37C935 / LAN91C100FD */ -#define SMSC_IRQ IRQ_IRL1 - -/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */ -#define PCI2_IRQ IRQ_IRL3 - -unsigned long epld_virt; - -#define EPLD_BASE 0x04002000 -#define EPLD_STATUS_BASE (epld_virt + 0x10) -#define EPLD_MASK_BASE (epld_virt + 0x20) - -/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto - the same SH-5 interrupt */ - -static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id) -{ - printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n"); - return IRQ_NONE; -} - -static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id) -{ - printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq); - return IRQ_NONE; -} - -static struct irqaction cayman_action_smsc = { - .name = "Cayman SMSC Mux", - .handler = cayman_interrupt_smsc, - .flags = IRQF_DISABLED, -}; - -static struct irqaction cayman_action_pci2 = { - .name = "Cayman PCI2 Mux", - .handler = cayman_interrupt_pci2, - .flags = IRQF_DISABLED, -}; - -static void enable_cayman_irq(unsigned int irq) -{ - unsigned long flags; - unsigned long mask; - unsigned int reg; - unsigned char bit; - - irq -= START_EXT_IRQS; - reg = EPLD_MASK_BASE + ((irq / 8) << 2); - bit = 1<<(irq % 8); - local_irq_save(flags); - mask = ctrl_inl(reg); - mask |= bit; - ctrl_outl(mask, reg); - local_irq_restore(flags); -} - -void disable_cayman_irq(unsigned int irq) -{ - unsigned long flags; - unsigned long mask; - unsigned int reg; - unsigned char bit; - - irq -= START_EXT_IRQS; - reg = EPLD_MASK_BASE + ((irq / 8) << 2); - bit = 1<<(irq % 8); - local_irq_save(flags); - mask = ctrl_inl(reg); - mask &= ~bit; - ctrl_outl(mask, reg); - local_irq_restore(flags); -} - -static void ack_cayman_irq(unsigned int irq) -{ - disable_cayman_irq(irq); -} - -static void end_cayman_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_cayman_irq(irq); -} - -static unsigned int startup_cayman_irq(unsigned int irq) -{ - enable_cayman_irq(irq); - return 0; /* never anything pending */ -} - -static void shutdown_cayman_irq(unsigned int irq) -{ - disable_cayman_irq(irq); -} - -struct hw_interrupt_type cayman_irq_type = { - .typename = "Cayman-IRQ", - .startup = startup_cayman_irq, - .shutdown = shutdown_cayman_irq, - .enable = enable_cayman_irq, - .disable = disable_cayman_irq, - .ack = ack_cayman_irq, - .end = end_cayman_irq, -}; - -int cayman_irq_demux(int evt) -{ - int irq = intc_evt_to_irq[evt]; - - if (irq == SMSC_IRQ) { - unsigned long status; - int i; - - status = ctrl_inl(EPLD_STATUS_BASE) & - ctrl_inl(EPLD_MASK_BASE) & 0xff; - if (status == 0) { - irq = -1; - } else { - for (i=0; i<8; i++) { - if (status & (1<= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) { - return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24)); - } - - return 0; -} -#endif - -void init_cayman_irq(void) -{ - int i; - - epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD"); - if (!epld_virt) { - printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n"); - return; - } - - for (i=0; i - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Flash the LEDs - */ -#include - -/* -** It is supposed these functions to be used for a low level -** debugging (via Cayman LEDs), hence to be available as soon -** as possible. -** Unfortunately Cayman LEDs relies on Cayman EPLD to be mapped -** (this happen when IRQ are initialized... quite late). -** These triky dependencies should be removed. Temporary, it -** may be enough to NOP until EPLD is mapped. -*/ - -extern unsigned long epld_virt; - -#define LED_ADDR (epld_virt + 0x008) -#define HDSP2534_ADDR (epld_virt + 0x100) - -void mach_led(int position, int value) -{ - if (!epld_virt) - return; - - if (value) - ctrl_outl(0, LED_ADDR); - else - ctrl_outl(1, LED_ADDR); - -} - -void mach_alphanum(int position, unsigned char value) -{ - if (!epld_virt) - return; - - ctrl_outb(value, HDSP2534_ADDR + 0xe0 + (position << 2)); -} - -void mach_alphanum_brightness(int setting) -{ - ctrl_outb(setting & 7, HDSP2534_ADDR + 0xc0); -} diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/cayman/setup.c deleted file mode 100644 index e7f9cc5f2ff1..000000000000 --- a/arch/sh/boards/cayman/setup.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * arch/sh/mach-cayman/setup.c - * - * SH5 Cayman support - * - * Copyright (C) 2002 David J. Mckay & Benedict Gaster - * Copyright (C) 2003 - 2007 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include - -/* - * Platform Dependent Interrupt Priorities. - */ - -/* Using defaults defined in irq.h */ -#define RES NO_PRIORITY /* Disabled */ -#define IR0 IRL0_PRIORITY /* IRLs */ -#define IR1 IRL1_PRIORITY -#define IR2 IRL2_PRIORITY -#define IR3 IRL3_PRIORITY -#define PCA INTA_PRIORITY /* PCI Ints */ -#define PCB INTB_PRIORITY -#define PCC INTC_PRIORITY -#define PCD INTD_PRIORITY -#define SER TOP_PRIORITY -#define ERR TOP_PRIORITY -#define PW0 TOP_PRIORITY -#define PW1 TOP_PRIORITY -#define PW2 TOP_PRIORITY -#define PW3 TOP_PRIORITY -#define DM0 NO_PRIORITY /* DMA Ints */ -#define DM1 NO_PRIORITY -#define DM2 NO_PRIORITY -#define DM3 NO_PRIORITY -#define DAE NO_PRIORITY -#define TU0 TIMER_PRIORITY /* TMU Ints */ -#define TU1 NO_PRIORITY -#define TU2 NO_PRIORITY -#define TI2 NO_PRIORITY -#define ATI NO_PRIORITY /* RTC Ints */ -#define PRI NO_PRIORITY -#define CUI RTC_PRIORITY -#define ERI SCIF_PRIORITY /* SCIF Ints */ -#define RXI SCIF_PRIORITY -#define BRI SCIF_PRIORITY -#define TXI SCIF_PRIORITY -#define ITI TOP_PRIORITY /* WDT Ints */ - -/* Setup for the SMSC FDC37C935 */ -#define SMSC_SUPERIO_BASE 0x04000000 -#define SMSC_CONFIG_PORT_ADDR 0x3f0 -#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR -#define SMSC_DATA_PORT_ADDR 0x3f1 - -#define SMSC_ENTER_CONFIG_KEY 0x55 -#define SMSC_EXIT_CONFIG_KEY 0xaa - -#define SMCS_LOGICAL_DEV_INDEX 0x07 -#define SMSC_DEVICE_ID_INDEX 0x20 -#define SMSC_DEVICE_REV_INDEX 0x21 -#define SMSC_ACTIVATE_INDEX 0x30 -#define SMSC_PRIMARY_BASE_INDEX 0x60 -#define SMSC_SECONDARY_BASE_INDEX 0x62 -#define SMSC_PRIMARY_INT_INDEX 0x70 -#define SMSC_SECONDARY_INT_INDEX 0x72 - -#define SMSC_IDE1_DEVICE 1 -#define SMSC_KEYBOARD_DEVICE 7 -#define SMSC_CONFIG_REGISTERS 8 - -#define SMSC_SUPERIO_READ_INDEXED(index) ({ \ - outb((index), SMSC_INDEX_PORT_ADDR); \ - inb(SMSC_DATA_PORT_ADDR); }) -#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \ - outb((index), SMSC_INDEX_PORT_ADDR); \ - outb((val), SMSC_DATA_PORT_ADDR); }) - -#define IDE1_PRIMARY_BASE 0x01f0 -#define IDE1_SECONDARY_BASE 0x03f6 - -unsigned long smsc_superio_virt; - -int platform_int_priority[NR_INTC_IRQS] = { - IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */ - RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */ - PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */ - RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */ - TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */ - RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */ - RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */ - RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */ -}; - -static int __init smsc_superio_setup(void) -{ - unsigned char devid, devrev; - - smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO"); - if (!smsc_superio_virt) { - panic("Unable to remap SMSC SuperIO\n"); - } - - /* Initially the chip is in run state */ - /* Put it into configuration state */ - outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); - outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); - - /* Read device ID info */ - devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX); - devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX); - printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev); - - /* Select the keyboard device */ - SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX); - - /* enable it */ - SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); - - /* Select the interrupts */ - /* On a PC keyboard is IRQ1, mouse is IRQ12 */ - SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX); - SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX); - -#ifdef CONFIG_IDE - /* - * Only IDE1 exists on the Cayman - */ - - /* Power it on */ - SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22); - - SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX); - SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); - - SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8, - SMSC_PRIMARY_BASE_INDEX + 0); - SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff, - SMSC_PRIMARY_BASE_INDEX + 1); - - SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8, - SMSC_SECONDARY_BASE_INDEX + 0); - SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff, - SMSC_SECONDARY_BASE_INDEX + 1); - - SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX); - - SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, - SMCS_LOGICAL_DEV_INDEX); - - SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */ - SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */ - SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */ - SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */ -#endif - - /* Exit the configuration state */ - outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); - - return 0; -} -__initcall(smsc_superio_setup); - -static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len) -{ - if (port < 0x400) { - extern unsigned long smsc_superio_virt; - return (void __iomem *)((port << 2) | smsc_superio_virt); - } - - return (void __iomem *)port; -} - -extern void init_cayman_irq(void); - -static struct sh_machine_vector mv_cayman __initmv = { - .mv_name = "Hitachi Cayman", - .mv_nr_irqs = 64, - .mv_ioport_map = cayman_ioport_map, - .mv_init_irq = init_cayman_irq, -}; diff --git a/arch/sh/boards/dreamcast/Makefile b/arch/sh/boards/dreamcast/Makefile deleted file mode 100644 index 7b97546c7e5f..000000000000 --- a/arch/sh/boards/dreamcast/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the Sega Dreamcast specific parts of the kernel -# - -obj-y := setup.o irq.o rtc.o - diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c deleted file mode 100644 index 67bdc33dd411..000000000000 --- a/arch/sh/boards/dreamcast/irq.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * arch/sh/boards/dreamcast/irq.c - * - * Holly IRQ support for the Sega Dreamcast. - * - * Copyright (c) 2001, 2002 M. R. Brown - * - * This file is part of the LinuxDC project (www.linuxdc.org) - * Released under the terms of the GNU GPL v2.0 - */ - -#include -#include -#include -#include - -/* Dreamcast System ASIC Hardware Events - - - The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving - hardware events from system peripherals and triggering an SH7750 IRQ. - Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are - set in the Event Mask Registers (EMRs). When a hardware event is - triggered, it's corresponding bit in the Event Status Registers (ESRs) - is set, and that bit should be rewritten to the ESR to acknowledge that - event. - - There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908. Event - types can be found in include/asm-sh/dreamcast/sysasic.h. There are three - groups of EMRs that parallel the ESRs. Each EMR group corresponds to an - IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928 - triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9. - - In the kernel, these events are mapped to virtual IRQs so that drivers can - respond to them as they would a normal interrupt. In order to keep this - mapping simple, the events are mapped as: - - 6900/6910 - Events 0-31, IRQ 13 - 6904/6924 - Events 32-63, IRQ 11 - 6908/6938 - Events 64-95, IRQ 9 - -*/ - -#define ESR_BASE 0x005f6900 /* Base event status register */ -#define EMR_BASE 0x005f6910 /* Base event mask register */ - -/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910, - 1 = 0x6920, 2 = 0x6930; also determine the event offset */ -#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32) - -/* Return the hardware event's bit positon within the EMR/ESR */ -#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31) - -/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ - (logically mapped to the corresponding bit for the hardware event). */ - -/* Disable the hardware event by masking its bit in its EMR */ -static inline void disable_systemasic_irq(unsigned int irq) -{ - __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); - __u32 mask; - - mask = inl(emr); - mask &= ~(1 << EVENT_BIT(irq)); - outl(mask, emr); -} - -/* Enable the hardware event by setting its bit in its EMR */ -static inline void enable_systemasic_irq(unsigned int irq) -{ - __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); - __u32 mask; - - mask = inl(emr); - mask |= (1 << EVENT_BIT(irq)); - outl(mask, emr); -} - -/* Acknowledge a hardware event by writing its bit back to its ESR */ -static void ack_systemasic_irq(unsigned int irq) -{ - __u32 esr = ESR_BASE + (LEVEL(irq) << 2); - disable_systemasic_irq(irq); - outl((1 << EVENT_BIT(irq)), esr); -} - -/* After a IRQ has been ack'd and responded to, it needs to be renabled */ -static void end_systemasic_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_systemasic_irq(irq); -} - -static unsigned int startup_systemasic_irq(unsigned int irq) -{ - enable_systemasic_irq(irq); - - return 0; -} - -static void shutdown_systemasic_irq(unsigned int irq) -{ - disable_systemasic_irq(irq); -} - -struct hw_interrupt_type systemasic_int = { - .typename = "System ASIC", - .startup = startup_systemasic_irq, - .shutdown = shutdown_systemasic_irq, - .enable = enable_systemasic_irq, - .disable = disable_systemasic_irq, - .ack = ack_systemasic_irq, - .end = end_systemasic_irq, -}; - -/* - * Map the hardware event indicated by the processor IRQ to a virtual IRQ. - */ -int systemasic_irq_demux(int irq) -{ - __u32 emr, esr, status, level; - __u32 j, bit; - - switch (irq) { - case 13: - level = 0; - break; - case 11: - level = 1; - break; - case 9: - level = 2; - break; - default: - return irq; - } - emr = EMR_BASE + (level << 4) + (level << 2); - esr = ESR_BASE + (level << 2); - - /* Mask the ESR to filter any spurious, unwanted interrupts */ - status = inl(esr); - status &= inl(emr); - - /* Now scan and find the first set bit as the event to map */ - for (bit = 1, j = 0; j < 32; bit <<= 1, j++) { - if (status & bit) { - irq = HW_EVENT_IRQ_BASE + j + (level << 5); - return irq; - } - } - - /* Not reached */ - return irq; -} diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/dreamcast/rtc.c deleted file mode 100644 index a7433685798d..000000000000 --- a/arch/sh/boards/dreamcast/rtc.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * arch/sh/boards/dreamcast/rtc.c - * - * Dreamcast AICA RTC routines. - * - * Copyright (c) 2001, 2002 M. R. Brown - * Copyright (c) 2002 Paul Mundt - * - * Released under the terms of the GNU GPL v2.0. - * - */ - -#include -#include -#include - -/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in - seconds) to get the standard Unix Epoch when getting the time, and add - 20 years when setting the time. */ -#define TWENTY_YEARS ((20 * 365LU + 5) * 86400) - -/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit - registers.*/ -#define AICA_RTC_SECS_H 0xa0710000 -#define AICA_RTC_SECS_L 0xa0710004 - -/** - * aica_rtc_gettimeofday - Get the time from the AICA RTC - * @ts: pointer to resulting timespec - * - * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch. - */ -static void aica_rtc_gettimeofday(struct timespec *ts) -{ - unsigned long val1, val2; - - do { - val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); - - val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); - } while (val1 != val2); - - ts->tv_sec = val1 - TWENTY_YEARS; - - /* Can't get nanoseconds with just a seconds counter. */ - ts->tv_nsec = 0; -} - -/** - * aica_rtc_settimeofday - Set the AICA RTC to the current time - * @secs: contains the time_t to set - * - * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter. - */ -static int aica_rtc_settimeofday(const time_t secs) -{ - unsigned long val1, val2; - unsigned long adj = secs + TWENTY_YEARS; - - do { - ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H); - ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L); - - val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); - - val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); - } while (val1 != val2); - - return 0; -} - -void aica_time_init(void) -{ - rtc_sh_get_time = aica_rtc_gettimeofday; - rtc_sh_set_time = aica_rtc_settimeofday; -} - diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c deleted file mode 100644 index 7d944fc75e93..000000000000 --- a/arch/sh/boards/dreamcast/setup.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * arch/sh/boards/dreamcast/setup.c - * - * Hardware support for the Sega Dreamcast. - * - * Copyright (c) 2001, 2002 M. R. Brown - * Copyright (c) 2002, 2003, 2004 Paul Mundt - * - * This file is part of the LinuxDC project (www.linuxdc.org) - * - * Released under the terms of the GNU GPL v2.0. - * - * This file originally bore the message (with enclosed-$): - * Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp - * SEGA Dreamcast support - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -extern struct hw_interrupt_type systemasic_int; -extern void aica_time_init(void); -extern int gapspci_init(void); -extern int systemasic_irq_demux(int); - -static void __init dreamcast_setup(char **cmdline_p) -{ - int i; - - /* Mask all hardware events */ - /* XXX */ - - /* Acknowledge any previous events */ - /* XXX */ - - __set_io_port_base(0xa0000000); - - /* Assign all virtual IRQs to the System ASIC int. handler */ - for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) - irq_desc[i].chip = &systemasic_int; - - board_time_init = aica_time_init; - -#ifdef CONFIG_PCI - if (gapspci_init() < 0) - printk(KERN_WARNING "GAPSPCI was not detected.\n"); -#endif -} - -static struct sh_machine_vector mv_dreamcast __initmv = { - .mv_name = "Sega Dreamcast", - .mv_setup = dreamcast_setup, - .mv_irq_demux = systemasic_irq_demux, -}; diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/hp6xx/Makefile deleted file mode 100644 index b3124278247c..000000000000 --- a/arch/sh/boards/hp6xx/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the HP6xx specific parts of the kernel -# - -obj-y := setup.o -obj-$(CONFIG_PM) += pm.o pm_wakeup.o -obj-$(CONFIG_APM_EMULATION) += hp6xx_apm.o diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/hp6xx/hp6xx_apm.c deleted file mode 100644 index 177f4f028e0d..000000000000 --- a/arch/sh/boards/hp6xx/hp6xx_apm.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * bios-less APM driver for hp680 - * - * Copyright 2005 (c) Andriy Skulysh - * Copyright 2008 (c) Kristoffer Ericson - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -/* percentage values */ -#define APM_CRITICAL 10 -#define APM_LOW 30 - -/* resonably sane values */ -#define HP680_BATTERY_MAX 898 -#define HP680_BATTERY_MIN 486 -#define HP680_BATTERY_AC_ON 1023 - -#define MODNAME "hp6x0_apm" - -#define PGDR 0xa400012c - -static void hp6x0_apm_get_power_status(struct apm_power_info *info) -{ - int battery, backup, charging, percentage; - u8 pgdr; - - battery = adc_single(ADC_CHANNEL_BATTERY); - backup = adc_single(ADC_CHANNEL_BACKUP); - charging = adc_single(ADC_CHANNEL_CHARGE); - - percentage = 100 * (battery - HP680_BATTERY_MIN) / - (HP680_BATTERY_MAX - HP680_BATTERY_MIN); - - /* % of full battery */ - info->battery_life = percentage; - - /* We want our estimates in minutes */ - info->units = 0; - - /* Extremely(!!) rough estimate, we will replace this with a datalist later on */ - info->time = (2 * battery); - - info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ? - APM_AC_ONLINE : APM_AC_OFFLINE; - - pgdr = ctrl_inb(PGDR); - if (pgdr & PGDR_MAIN_BATTERY_OUT) { - info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT; - info->battery_flag = 0x80; - } else if (charging < 8) { - info->battery_status = APM_BATTERY_STATUS_CHARGING; - info->battery_flag = 0x08; - info->ac_line_status = 0x01; - } else if (percentage <= APM_CRITICAL) { - info->battery_status = APM_BATTERY_STATUS_CRITICAL; - info->battery_flag = 0x04; - } else if (percentage <= APM_LOW) { - info->battery_status = APM_BATTERY_STATUS_LOW; - info->battery_flag = 0x02; - } else { - info->battery_status = APM_BATTERY_STATUS_HIGH; - info->battery_flag = 0x01; - } -} - -static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev) -{ - if (!APM_DISABLED) - apm_queue_event(APM_USER_SUSPEND); - - return IRQ_HANDLED; -} - -static int __init hp6x0_apm_init(void) -{ - int ret; - - ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt, - IRQF_DISABLED, MODNAME, NULL); - if (unlikely(ret < 0)) { - printk(KERN_ERR MODNAME ": IRQ %d request failed\n", - HP680_BTN_IRQ); - return ret; - } - - apm_get_power_status = hp6x0_apm_get_power_status; - - return ret; -} - -static void __exit hp6x0_apm_exit(void) -{ - free_irq(HP680_BTN_IRQ, 0); -} - -module_init(hp6x0_apm_init); -module_exit(hp6x0_apm_exit); - -MODULE_AUTHOR("Adriy Skulysh"); -MODULE_DESCRIPTION("hp6xx Advanced Power Management"); -MODULE_LICENSE("GPL"); diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/hp6xx/pm.c deleted file mode 100644 index e96684def788..000000000000 --- a/arch/sh/boards/hp6xx/pm.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * hp6x0 Power Management Routines - * - * Copyright (c) 2006 Andriy Skulysh - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define STBCR 0xffffff82 -#define STBCR2 0xffffff88 - -static int hp6x0_pm_enter(suspend_state_t state) -{ - u8 stbcr, stbcr2; -#ifdef CONFIG_HD64461_ENABLER - u8 scr; - u16 hd64461_stbcr; -#endif - -#ifdef CONFIG_HD64461_ENABLER - outb(0, HD64461_PCC1CSCIER); - - scr = inb(HD64461_PCC1SCR); - scr |= HD64461_PCCSCR_VCC1; - outb(scr, HD64461_PCC1SCR); - - hd64461_stbcr = inw(HD64461_STBCR); - hd64461_stbcr |= HD64461_STBCR_SPC1ST; - outw(hd64461_stbcr, HD64461_STBCR); -#endif - - ctrl_outb(0x1f, DACR); - - stbcr = ctrl_inb(STBCR); - ctrl_outb(0x01, STBCR); - - stbcr2 = ctrl_inb(STBCR2); - ctrl_outb(0x7f , STBCR2); - - outw(0xf07f, HD64461_SCPUCR); - - pm_enter(); - - outw(0, HD64461_SCPUCR); - ctrl_outb(stbcr, STBCR); - ctrl_outb(stbcr2, STBCR2); - -#ifdef CONFIG_HD64461_ENABLER - hd64461_stbcr = inw(HD64461_STBCR); - hd64461_stbcr &= ~HD64461_STBCR_SPC1ST; - outw(hd64461_stbcr, HD64461_STBCR); - - outb(0x4c, HD64461_PCC1CSCIER); - outb(0x00, HD64461_PCC1CSCR); -#endif - - return 0; -} - -static struct platform_suspend_ops hp6x0_pm_ops = { - .enter = hp6x0_pm_enter, - .valid = suspend_valid_only_mem, -}; - -static int __init hp6x0_pm_init(void) -{ - suspend_set_ops(&hp6x0_pm_ops); - return 0; -} - -late_initcall(hp6x0_pm_init); diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/hp6xx/pm_wakeup.S deleted file mode 100644 index 44b648cf6f23..000000000000 --- a/arch/sh/boards/hp6xx/pm_wakeup.S +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (c) 2006 Andriy Skulysh - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#include -#include - -#define k0 r0 -#define k1 r1 -#define k2 r2 -#define k3 r3 -#define k4 r4 - -/* - * Kernel mode register usage: - * k0 scratch - * k1 scratch - * k2 scratch (Exception code) - * k3 scratch (Return address) - * k4 scratch - * k5 reserved - * k6 Global Interrupt Mask (0--15 << 4) - * k7 CURRENT_THREAD_INFO (pointer to current thread info) - */ - -ENTRY(wakeup_start) -! clear STBY bit - mov #-126, k2 - and #127, k0 - mov.b k0, @k2 -! enable refresh - mov.l 5f, k1 - mov.w 6f, k0 - mov.w k0, @k1 -! jump to handler - mov.l 2f, k2 - mov.l 3f, k3 - mov.l @k2, k2 - - mov.l 4f, k1 - jmp @k1 - nop - - .align 2 -1: .long EXPEVT -2: .long INTEVT -3: .long ret_from_irq -4: .long handle_exception -5: .long 0xffffff68 -6: .word 0x0524 - -ENTRY(wakeup_end) - nop diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c deleted file mode 100644 index 475b46caec1f..000000000000 --- a/arch/sh/boards/hp6xx/setup.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * linux/arch/sh/boards/hp6xx/setup.c - * - * Copyright (C) 2002 Andriy Skulysh - * Copyright (C) 2007 Kristoffer Ericson - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only) - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#define SCPCR 0xa4000116 -#define SCPDR 0xa4000136 - -/* CF Slot */ -static struct resource cf_ide_resources[] = { - [0] = { - .start = 0x15000000 + 0x1f0, - .end = 0x15000000 + 0x1f0 + 0x08 - 0x01, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x15000000 + 0x1fe, - .end = 0x15000000 + 0x1fe + 0x01, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 77, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cf_ide_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(cf_ide_resources), - .resource = cf_ide_resources, -}; - -static struct platform_device jornadakbd_device = { - .name = "jornada680_kbd", - .id = -1, -}; - -static struct platform_device *hp6xx_devices[] __initdata = { - &cf_ide_device, - &jornadakbd_device, -}; - -static void __init hp6xx_init_irq(void) -{ - /* Gets touchscreen and powerbutton IRQ working */ - plat_irq_setup_pins(IRQ_MODE_IRQ); -} - -static int __init hp6xx_devices_setup(void) -{ - return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices)); -} - -static void __init hp6xx_setup(char **cmdline_p) -{ - u8 v8; - u16 v; - - v = inw(HD64461_STBCR); - v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST | - HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST | - HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST | - HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST| - HD64461_STBCR_SAFECKE_IST; -#ifndef CONFIG_HD64461_ENABLER - v |= HD64461_STBCR_SPC1ST; -#endif - outw(v, HD64461_STBCR); - v = inw(HD64461_GPADR); - v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0; - outw(v, HD64461_GPADR); - - outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR); - -#ifndef CONFIG_HD64461_ENABLER - outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR); -#endif - - sh_dac_output(0, DAC_SPEAKER_VOLUME); - sh_dac_disable(DAC_SPEAKER_VOLUME); - v8 = ctrl_inb(DACR); - v8 &= ~DACR_DAE; - ctrl_outb(v8,DACR); - - v8 = ctrl_inb(SCPDR); - v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y; - v8 &= ~SCPDR_TS_SCAN_ENABLE; - ctrl_outb(v8, SCPDR); - - v = ctrl_inw(SCPCR); - v &= ~SCPCR_TS_MASK; - v |= SCPCR_TS_ENABLE; - ctrl_outw(v, SCPCR); -} -device_initcall(hp6xx_devices_setup); - -static struct sh_machine_vector mv_hp6xx __initmv = { - .mv_name = "hp6xx", - .mv_setup = hp6xx_setup, - /* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */ - .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6, - .mv_irq_demux = hd64461_irq_demux, - /* Enable IRQ0 -> IRQ3 in IRQ_MODE */ - .mv_init_irq = hp6xx_init_irq, -}; diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/landisk/Makefile deleted file mode 100644 index a696b4277fa9..000000000000 --- a/arch/sh/boards/landisk/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for I-O DATA DEVICE, INC. "LANDISK Series" -# - -obj-y := setup.o irq.o psw.o gio.o diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c deleted file mode 100644 index edcde082032d..000000000000 --- a/arch/sh/boards/landisk/gio.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * arch/sh/boards/landisk/gio.c - driver for landisk - * - * This driver will also support the I-O DATA Device, Inc. LANDISK Board. - * LANDISK and USL-5P Button, LED and GIO driver drive function. - * - * Copylight (C) 2006 kogiidena - * Copylight (C) 2002 Atom Create Engineering Co., Ltd. * - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DEVCOUNT 4 -#define GIO_MINOR 2 /* GIO minor no. */ - -static dev_t dev; -static struct cdev *cdev_p; -static int openCnt; - -static int gio_open(struct inode *inode, struct file *filp) -{ - int minor; - int ret = -ENOENT; - - lock_kernel(); - minor = MINOR(inode->i_rdev); - if (minor < DEVCOUNT) { - if (openCnt > 0) { - ret = -EALREADY; - } else { - openCnt++; - ret = 0; - } - } - unlock_kernel(); - return ret; -} - -static int gio_close(struct inode *inode, struct file *filp) -{ - int minor; - - minor = MINOR(inode->i_rdev); - if (minor < DEVCOUNT) { - openCnt--; - } - return 0; -} - -static int gio_ioctl(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - unsigned int data; - static unsigned int addr = 0; - - if (cmd & 0x01) { /* write */ - if (copy_from_user(&data, (int *)arg, sizeof(int))) { - return -EFAULT; - } - } - - switch (cmd) { - case GIODRV_IOCSGIOSETADDR: /* address set */ - addr = data; - break; - - case GIODRV_IOCSGIODATA1: /* write byte */ - ctrl_outb((unsigned char)(0x0ff & data), addr); - break; - - case GIODRV_IOCSGIODATA2: /* write word */ - if (addr & 0x01) { - return -EFAULT; - } - ctrl_outw((unsigned short int)(0x0ffff & data), addr); - break; - - case GIODRV_IOCSGIODATA4: /* write long */ - if (addr & 0x03) { - return -EFAULT; - } - ctrl_outl(data, addr); - break; - - case GIODRV_IOCGGIODATA1: /* read byte */ - data = ctrl_inb(addr); - break; - - case GIODRV_IOCGGIODATA2: /* read word */ - if (addr & 0x01) { - return -EFAULT; - } - data = ctrl_inw(addr); - break; - - case GIODRV_IOCGGIODATA4: /* read long */ - if (addr & 0x03) { - return -EFAULT; - } - data = ctrl_inl(addr); - break; - default: - return -EFAULT; - break; - } - - if ((cmd & 0x01) == 0) { /* read */ - if (copy_to_user((int *)arg, &data, sizeof(int))) { - return -EFAULT; - } - } - return 0; -} - -static const struct file_operations gio_fops = { - .owner = THIS_MODULE, - .open = gio_open, /* open */ - .release = gio_close, /* release */ - .ioctl = gio_ioctl, /* ioctl */ -}; - -static int __init gio_init(void) -{ - int error; - - printk(KERN_INFO "gio: driver initialized\n"); - - openCnt = 0; - - if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) { - printk(KERN_ERR - "gio: Couldn't alloc_chrdev_region, error=%d\n", - error); - return 1; - } - - cdev_p = cdev_alloc(); - cdev_p->ops = &gio_fops; - error = cdev_add(cdev_p, dev, DEVCOUNT); - if (error) { - printk(KERN_ERR - "gio: Couldn't cdev_add, error=%d\n", error); - return 1; - } - - return 0; -} - -static void __exit gio_exit(void) -{ - cdev_del(cdev_p); - unregister_chrdev_region(dev, DEVCOUNT); -} - -module_init(gio_init); -module_exit(gio_exit); - -MODULE_LICENSE("GPL"); diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c deleted file mode 100644 index d0f9378f6ff4..000000000000 --- a/arch/sh/boards/landisk/irq.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * arch/sh/boards/landisk/irq.c - * - * I-O DATA Device, Inc. LANDISK Support - * - * Copyright (C) 2005-2007 kogiidena - * - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include - -static void disable_landisk_irq(unsigned int irq) -{ - unsigned char mask = 0xff ^ (0x01 << (irq - 5)); - - ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK); -} - -static void enable_landisk_irq(unsigned int irq) -{ - unsigned char value = (0x01 << (irq - 5)); - - ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK); -} - -static struct irq_chip landisk_irq_chip __read_mostly = { - .name = "LANDISK", - .mask = disable_landisk_irq, - .unmask = enable_landisk_irq, - .mask_ack = disable_landisk_irq, -}; - -/* - * Initialize IRQ setting - */ -void __init init_landisk_IRQ(void) -{ - int i; - - for (i = 5; i < 14; i++) { - disable_irq_nosync(i); - set_irq_chip_and_handler_name(i, &landisk_irq_chip, - handle_level_irq, "level"); - enable_landisk_irq(i); - } - ctrl_outb(0x00, PA_PWRINT_CLR); -} diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/landisk/psw.c deleted file mode 100644 index 4bd502cbaeeb..000000000000 --- a/arch/sh/boards/landisk/psw.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * arch/sh/boards/landisk/psw.c - * - * push switch support for LANDISK and USL-5P - * - * Copyright (C) 2006-2007 Paul Mundt - * Copyright (C) 2007 kogiidena - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include - -static irqreturn_t psw_irq_handler(int irq, void *arg) -{ - struct platform_device *pdev = arg; - struct push_switch *psw = platform_get_drvdata(pdev); - struct push_switch_platform_info *psw_info = pdev->dev.platform_data; - unsigned int sw_value; - int ret = 0; - - sw_value = (0x0ff & (~ctrl_inb(PA_STATUS))); - - /* Nothing to do if there's no state change */ - if (psw->state) { - ret = 1; - goto out; - } - - /* Figure out who raised it */ - if (sw_value & (1 << psw_info->bit)) { - psw->state = 1; - mod_timer(&psw->debounce, jiffies + 50); - ret = 1; - } - -out: - /* Clear the switch IRQs */ - ctrl_outb(0x00, PA_PWRINT_CLR); - - return IRQ_RETVAL(ret); -} - -static struct resource psw_power_resources[] = { - [0] = { - .start = IRQ_POWER, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource psw_usl5p_resources[] = { - [0] = { - .start = IRQ_BUTTON, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct push_switch_platform_info psw_power_platform_data = { - .name = "psw_power", - .bit = 4, - .irq_flags = IRQF_SHARED, - .irq_handler = psw_irq_handler, -}; - -static struct push_switch_platform_info psw1_platform_data = { - .name = "psw1", - .bit = 0, - .irq_flags = IRQF_SHARED, - .irq_handler = psw_irq_handler, -}; - -static struct push_switch_platform_info psw2_platform_data = { - .name = "psw2", - .bit = 2, - .irq_flags = IRQF_SHARED, - .irq_handler = psw_irq_handler, -}; - -static struct push_switch_platform_info psw3_platform_data = { - .name = "psw3", - .bit = 1, - .irq_flags = IRQF_SHARED, - .irq_handler = psw_irq_handler, -}; - -static struct platform_device psw_power_switch_device = { - .name = "push-switch", - .id = 0, - .num_resources = ARRAY_SIZE(psw_power_resources), - .resource = psw_power_resources, - .dev = { - .platform_data = &psw_power_platform_data, - }, -}; - -static struct platform_device psw1_switch_device = { - .name = "push-switch", - .id = 1, - .num_resources = ARRAY_SIZE(psw_usl5p_resources), - .resource = psw_usl5p_resources, - .dev = { - .platform_data = &psw1_platform_data, - }, -}; - -static struct platform_device psw2_switch_device = { - .name = "push-switch", - .id = 2, - .num_resources = ARRAY_SIZE(psw_usl5p_resources), - .resource = psw_usl5p_resources, - .dev = { - .platform_data = &psw2_platform_data, - }, -}; - -static struct platform_device psw3_switch_device = { - .name = "push-switch", - .id = 3, - .num_resources = ARRAY_SIZE(psw_usl5p_resources), - .resource = psw_usl5p_resources, - .dev = { - .platform_data = &psw3_platform_data, - }, -}; - -static struct platform_device *psw_devices[] = { - &psw_power_switch_device, - &psw1_switch_device, - &psw2_switch_device, - &psw3_switch_device, -}; - -static int __init psw_init(void) -{ - return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices)); -} -module_init(psw_init); diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c deleted file mode 100644 index 470c78111681..000000000000 --- a/arch/sh/boards/landisk/setup.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * arch/sh/boards/landisk/setup.c - * - * I-O DATA Device, Inc. LANDISK Support. - * - * Copyright (C) 2000 Kazumoto Kojima - * Copyright (C) 2002 Paul Mundt - * Copylight (C) 2002 Atom Create Engineering Co., Ltd. - * Copyright (C) 2005-2007 kogiidena - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -void init_landisk_IRQ(void); - -static void landisk_power_off(void) -{ - ctrl_outb(0x01, PA_SHUTDOWN); -} - -static struct resource cf_ide_resources[3]; - -static struct pata_platform_info pata_info = { - .ioport_shift = 1, -}; - -static struct platform_device cf_ide_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(cf_ide_resources), - .resource = cf_ide_resources, - .dev = { - .platform_data = &pata_info, - }, -}; - -static struct platform_device rtc_device = { - .name = "rs5c313", - .id = -1, -}; - -static struct platform_device *landisk_devices[] __initdata = { - &cf_ide_device, - &rtc_device, -}; - -static int __init landisk_devices_setup(void) -{ - pgprot_t prot; - unsigned long paddrbase; - void *cf_ide_base; - - /* open I/O area window */ - paddrbase = virt_to_phys((void *)PA_AREA5_IO); - prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16); - cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot); - if (!cf_ide_base) { - printk("allocate_cf_area : can't open CF I/O window!\n"); - return -ENOMEM; - } - - /* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */ - cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40; - cf_ide_resources[0].end = (unsigned long)cf_ide_base + 0x40 + 0x0f; - cf_ide_resources[0].flags = IORESOURCE_IO; - cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c; - cf_ide_resources[1].end = (unsigned long)cf_ide_base + 0x2c + 0x03; - cf_ide_resources[1].flags = IORESOURCE_IO; - cf_ide_resources[2].start = IRQ_FATA; - cf_ide_resources[2].flags = IORESOURCE_IRQ; - - return platform_add_devices(landisk_devices, - ARRAY_SIZE(landisk_devices)); -} - -__initcall(landisk_devices_setup); - -static void __init landisk_setup(char **cmdline_p) -{ - /* LED ON */ - ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED); - - printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n"); - pm_power_off = landisk_power_off; -} - -/* - * The Machine Vector - */ -static struct sh_machine_vector mv_landisk __initmv = { - .mv_name = "LANDISK", - .mv_nr_irqs = 72, - .mv_setup = landisk_setup, - .mv_init_irq = init_landisk_IRQ, -}; diff --git a/arch/sh/boards/lboxre2/Makefile b/arch/sh/boards/lboxre2/Makefile deleted file mode 100644 index e9ed140c06f6..000000000000 --- a/arch/sh/boards/lboxre2/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the L-BOX RE2 specific parts of the kernel -# Copyright (c) 2007 Nobuhiro Iwamatsu - -obj-y := setup.o irq.o diff --git a/arch/sh/boards/lboxre2/irq.c b/arch/sh/boards/lboxre2/irq.c deleted file mode 100644 index 5a1c3bbe7b50..000000000000 --- a/arch/sh/boards/lboxre2/irq.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/arch/sh/boards/lboxre2/irq.c - * - * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * NTT COMWARE L-BOX RE2 Support. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#include -#include -#include -#include -#include -#include - -/* - * Initialize IRQ setting - */ -void __init init_lboxre2_IRQ(void) -{ - make_imask_irq(IRQ_CF1); - make_imask_irq(IRQ_CF0); - make_imask_irq(IRQ_INTD); - make_imask_irq(IRQ_ETH1); - make_imask_irq(IRQ_ETH0); - make_imask_irq(IRQ_INTA); -} diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/lboxre2/setup.c deleted file mode 100644 index c74440d38ee9..000000000000 --- a/arch/sh/boards/lboxre2/setup.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * linux/arch/sh/boards/lbox/setup.c - * - * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * NTT COMWARE L-BOX RE2 Support - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -static struct resource cf_ide_resources[] = { - [0] = { - .start = 0x1f0, - .end = 0x1f0 + 8 , - .flags = IORESOURCE_IO, - }, - [1] = { - .start = 0x1f0 + 0x206, - .end = 0x1f0 +8 + 0x206 + 8, - .flags = IORESOURCE_IO, - }, - [2] = { - .start = IRQ_CF0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cf_ide_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(cf_ide_resources), - .resource = cf_ide_resources, -}; - -static struct platform_device *lboxre2_devices[] __initdata = { - &cf_ide_device, -}; - -static int __init lboxre2_devices_setup(void) -{ - u32 cf0_io_base; /* Boot CF base address */ - pgprot_t prot; - unsigned long paddrbase, psize; - - /* open I/O area window */ - paddrbase = virt_to_phys((void*)PA_AREA5_IO); - psize = PAGE_SIZE; - prot = PAGE_KERNEL_PCC( 1 , _PAGE_PCC_IO16); - cf0_io_base = (u32)p3_ioremap(paddrbase, psize, prot.pgprot); - if (!cf0_io_base) { - printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ ); - return -ENOMEM; - } - - cf_ide_resources[0].start += cf0_io_base ; - cf_ide_resources[0].end += cf0_io_base ; - cf_ide_resources[1].start += cf0_io_base ; - cf_ide_resources[1].end += cf0_io_base ; - - return platform_add_devices(lboxre2_devices, - ARRAY_SIZE(lboxre2_devices)); - -} -device_initcall(lboxre2_devices_setup); - -/* - * The Machine Vector - */ -static struct sh_machine_vector mv_lboxre2 __initmv = { - .mv_name = "L-BOX RE2", - .mv_nr_irqs = 72, - .mv_init_irq = init_lboxre2_IRQ, -}; diff --git a/arch/sh/boards/mach-ap325rxa/Makefile b/arch/sh/boards/mach-ap325rxa/Makefile new file mode 100644 index 000000000000..f663768429f0 --- /dev/null +++ b/arch/sh/boards/mach-ap325rxa/Makefile @@ -0,0 +1 @@ +obj-y := setup.o diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c new file mode 100644 index 000000000000..7fa74462bd9f --- /dev/null +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -0,0 +1,313 @@ +/* + * Renesas - AP-325RXA + * (Compatible with Algo System ., LTD. - AP-320A) + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Author : Yusuke Goda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct smc911x_platdata smc911x_info = { + .flags = SMC911X_USE_32BIT, + .irq_flags = IRQF_TRIGGER_LOW, +}; + +static struct resource smc9118_resources[] = { + [0] = { + .start = 0xb6080000, + .end = 0xb60fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 35, + .end = 35, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc9118_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc9118_resources), + .resource = smc9118_resources, + .dev = { + .platform_data = &smc911x_info, + }, +}; + +static struct mtd_partition ap325rxa_nor_flash_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = (1 * 1024 * 1024), + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = (2 * 1024 * 1024), + }, { + .name = "other", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data ap325rxa_nor_flash_data = { + .width = 2, + .parts = ap325rxa_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(ap325rxa_nor_flash_partitions), +}; + +static struct resource ap325rxa_nor_flash_resources[] = { + [0] = { + .name = "NOR Flash", + .start = 0x00000000, + .end = 0x00ffffff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device ap325rxa_nor_flash_device = { + .name = "physmap-flash", + .resource = ap325rxa_nor_flash_resources, + .num_resources = ARRAY_SIZE(ap325rxa_nor_flash_resources), + .dev = { + .platform_data = &ap325rxa_nor_flash_data, + }, +}; + +#define FPGA_LCDREG 0xB4100180 +#define FPGA_BKLREG 0xB4100212 +#define FPGA_LCDREG_VAL 0x0018 +#define PORT_PHCR 0xA405010E +#define PORT_PLCR 0xA4050114 +#define PORT_PMCR 0xA4050116 +#define PORT_PRCR 0xA405011C +#define PORT_PSCR 0xA405011E +#define PORT_PZCR 0xA405014C +#define PORT_HIZCRA 0xA4050158 +#define PORT_MSELCRB 0xA4050182 +#define PORT_PSDR 0xA405013E +#define PORT_PZDR 0xA405016C +#define PORT_PSELD 0xA4050154 + +static void ap320_wvga_power_on(void *board_data) +{ + msleep(100); + + /* ASD AP-320/325 LCD ON */ + ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG); + + /* backlight */ + ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR); + ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR); + ctrl_outw(0x100, FPGA_BKLREG); +} + +static struct sh_mobile_lcdc_info lcdc_info = { + .clock_source = LCDC_CLK_EXTERNAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB18, + .clock_divider = 1, + .lcd_cfg = { + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 40, + .right_margin = 160, + .hsync_len = 8, + .upper_margin = 63, + .lower_margin = 80, + .vsync_len = 1, + .sync = 0, /* hsync and vsync are active low */ + }, + .board_cfg = { + .display_on = ap320_wvga_power_on, + }, + } +}; + +static struct resource lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe941fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc_resources), + .resource = lcdc_resources, + .dev = { + .platform_data = &lcdc_info, + }, +}; + +static unsigned char camera_ncm03j_magic[] = +{ + 0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8, + 0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36, + 0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F, + 0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55, + 0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12, + 0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0, + 0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F, + 0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A, + 0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A, + 0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A, + 0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56, + 0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37, + 0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A, + 0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56, + 0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC, + 0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F, +}; + +static int camera_set_capture(struct soc_camera_platform_info *info, + int enable) +{ + struct i2c_adapter *a = i2c_get_adapter(0); + struct i2c_msg msg; + int ret = 0; + int i; + + if (!enable) + return 0; /* no disable for now */ + + for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) { + u_int8_t buf[8]; + + msg.addr = 0x6e; + msg.buf = buf; + msg.len = 2; + msg.flags = 0; + + buf[0] = camera_ncm03j_magic[i]; + buf[1] = camera_ncm03j_magic[i + 1]; + + ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1); + } + + return ret; +} + +static struct soc_camera_platform_info camera_info = { + .iface = 0, + .format_name = "UYVY", + .format_depth = 16, + .format = { + .pixelformat = V4L2_PIX_FMT_UYVY, + .colorspace = V4L2_COLORSPACE_SMPTE170M, + .width = 640, + .height = 480, + }, + .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, + .set_capture = camera_set_capture, +}; + +static struct platform_device camera_device = { + .name = "soc_camera_platform", + .dev = { + .platform_data = &camera_info, + }, +}; + +static struct sh_mobile_ceu_info sh_mobile_ceu_info = { + .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, +}; + +static struct resource ceu_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 52, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device ceu_device = { + .name = "sh_mobile_ceu", + .num_resources = ARRAY_SIZE(ceu_resources), + .resource = ceu_resources, + .dev = { + .platform_data = &sh_mobile_ceu_info, + }, +}; + +static struct platform_device *ap325rxa_devices[] __initdata = { + &smc9118_device, + &ap325rxa_nor_flash_device, + &lcdc_device, + &ceu_device, + &camera_device, +}; + +static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { +}; + +static int __init ap325rxa_devices_setup(void) +{ + clk_always_enable("mstp200"); /* LCDC */ + clk_always_enable("mstp203"); /* CEU */ + + platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20); + + i2c_register_board_info(0, ap325rxa_i2c_devices, + ARRAY_SIZE(ap325rxa_i2c_devices)); + + return platform_add_devices(ap325rxa_devices, + ARRAY_SIZE(ap325rxa_devices)); +} +device_initcall(ap325rxa_devices_setup); + +static void __init ap325rxa_setup(char **cmdline_p) +{ + /* LCDC configuration */ + ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR); + ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR); + ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA); + + /* CEU */ + ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD); + ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR); + ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR); +} + +static struct sh_machine_vector mv_ap325rxa __initmv = { + .mv_name = "AP-325RXA", + .mv_setup = ap325rxa_setup, +}; diff --git a/arch/sh/boards/mach-cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile new file mode 100644 index 000000000000..489a8f867368 --- /dev/null +++ b/arch/sh/boards/mach-cayman/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Hitachi Cayman specific parts of the kernel +# +obj-y := setup.o irq.o +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c new file mode 100644 index 000000000000..ceb37ae92c70 --- /dev/null +++ b/arch/sh/boards/mach-cayman/irq.c @@ -0,0 +1,197 @@ +/* + * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support + * + * This file handles the board specific parts of the Cayman interrupt system + * + * Copyright (C) 2002 Stuart Menefy + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +/* Setup for the SMSC FDC37C935 / LAN91C100FD */ +#define SMSC_IRQ IRQ_IRL1 + +/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */ +#define PCI2_IRQ IRQ_IRL3 + +unsigned long epld_virt; + +#define EPLD_BASE 0x04002000 +#define EPLD_STATUS_BASE (epld_virt + 0x10) +#define EPLD_MASK_BASE (epld_virt + 0x20) + +/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto + the same SH-5 interrupt */ + +static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id) +{ + printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n"); + return IRQ_NONE; +} + +static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id) +{ + printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq); + return IRQ_NONE; +} + +static struct irqaction cayman_action_smsc = { + .name = "Cayman SMSC Mux", + .handler = cayman_interrupt_smsc, + .flags = IRQF_DISABLED, +}; + +static struct irqaction cayman_action_pci2 = { + .name = "Cayman PCI2 Mux", + .handler = cayman_interrupt_pci2, + .flags = IRQF_DISABLED, +}; + +static void enable_cayman_irq(unsigned int irq) +{ + unsigned long flags; + unsigned long mask; + unsigned int reg; + unsigned char bit; + + irq -= START_EXT_IRQS; + reg = EPLD_MASK_BASE + ((irq / 8) << 2); + bit = 1<<(irq % 8); + local_irq_save(flags); + mask = ctrl_inl(reg); + mask |= bit; + ctrl_outl(mask, reg); + local_irq_restore(flags); +} + +void disable_cayman_irq(unsigned int irq) +{ + unsigned long flags; + unsigned long mask; + unsigned int reg; + unsigned char bit; + + irq -= START_EXT_IRQS; + reg = EPLD_MASK_BASE + ((irq / 8) << 2); + bit = 1<<(irq % 8); + local_irq_save(flags); + mask = ctrl_inl(reg); + mask &= ~bit; + ctrl_outl(mask, reg); + local_irq_restore(flags); +} + +static void ack_cayman_irq(unsigned int irq) +{ + disable_cayman_irq(irq); +} + +static void end_cayman_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_cayman_irq(irq); +} + +static unsigned int startup_cayman_irq(unsigned int irq) +{ + enable_cayman_irq(irq); + return 0; /* never anything pending */ +} + +static void shutdown_cayman_irq(unsigned int irq) +{ + disable_cayman_irq(irq); +} + +struct hw_interrupt_type cayman_irq_type = { + .typename = "Cayman-IRQ", + .startup = startup_cayman_irq, + .shutdown = shutdown_cayman_irq, + .enable = enable_cayman_irq, + .disable = disable_cayman_irq, + .ack = ack_cayman_irq, + .end = end_cayman_irq, +}; + +int cayman_irq_demux(int evt) +{ + int irq = intc_evt_to_irq[evt]; + + if (irq == SMSC_IRQ) { + unsigned long status; + int i; + + status = ctrl_inl(EPLD_STATUS_BASE) & + ctrl_inl(EPLD_MASK_BASE) & 0xff; + if (status == 0) { + irq = -1; + } else { + for (i=0; i<8; i++) { + if (status & (1<= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) { + return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24)); + } + + return 0; +} +#endif + +void init_cayman_irq(void) +{ + int i; + + epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD"); + if (!epld_virt) { + printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n"); + return; + } + + for (i=0; i + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Flash the LEDs + */ +#include + +/* +** It is supposed these functions to be used for a low level +** debugging (via Cayman LEDs), hence to be available as soon +** as possible. +** Unfortunately Cayman LEDs relies on Cayman EPLD to be mapped +** (this happen when IRQ are initialized... quite late). +** These triky dependencies should be removed. Temporary, it +** may be enough to NOP until EPLD is mapped. +*/ + +extern unsigned long epld_virt; + +#define LED_ADDR (epld_virt + 0x008) +#define HDSP2534_ADDR (epld_virt + 0x100) + +void mach_led(int position, int value) +{ + if (!epld_virt) + return; + + if (value) + ctrl_outl(0, LED_ADDR); + else + ctrl_outl(1, LED_ADDR); + +} + +void mach_alphanum(int position, unsigned char value) +{ + if (!epld_virt) + return; + + ctrl_outb(value, HDSP2534_ADDR + 0xe0 + (position << 2)); +} + +void mach_alphanum_brightness(int setting) +{ + ctrl_outb(setting & 7, HDSP2534_ADDR + 0xc0); +} diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c new file mode 100644 index 000000000000..e7f9cc5f2ff1 --- /dev/null +++ b/arch/sh/boards/mach-cayman/setup.c @@ -0,0 +1,187 @@ +/* + * arch/sh/mach-cayman/setup.c + * + * SH5 Cayman support + * + * Copyright (C) 2002 David J. Mckay & Benedict Gaster + * Copyright (C) 2003 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +/* + * Platform Dependent Interrupt Priorities. + */ + +/* Using defaults defined in irq.h */ +#define RES NO_PRIORITY /* Disabled */ +#define IR0 IRL0_PRIORITY /* IRLs */ +#define IR1 IRL1_PRIORITY +#define IR2 IRL2_PRIORITY +#define IR3 IRL3_PRIORITY +#define PCA INTA_PRIORITY /* PCI Ints */ +#define PCB INTB_PRIORITY +#define PCC INTC_PRIORITY +#define PCD INTD_PRIORITY +#define SER TOP_PRIORITY +#define ERR TOP_PRIORITY +#define PW0 TOP_PRIORITY +#define PW1 TOP_PRIORITY +#define PW2 TOP_PRIORITY +#define PW3 TOP_PRIORITY +#define DM0 NO_PRIORITY /* DMA Ints */ +#define DM1 NO_PRIORITY +#define DM2 NO_PRIORITY +#define DM3 NO_PRIORITY +#define DAE NO_PRIORITY +#define TU0 TIMER_PRIORITY /* TMU Ints */ +#define TU1 NO_PRIORITY +#define TU2 NO_PRIORITY +#define TI2 NO_PRIORITY +#define ATI NO_PRIORITY /* RTC Ints */ +#define PRI NO_PRIORITY +#define CUI RTC_PRIORITY +#define ERI SCIF_PRIORITY /* SCIF Ints */ +#define RXI SCIF_PRIORITY +#define BRI SCIF_PRIORITY +#define TXI SCIF_PRIORITY +#define ITI TOP_PRIORITY /* WDT Ints */ + +/* Setup for the SMSC FDC37C935 */ +#define SMSC_SUPERIO_BASE 0x04000000 +#define SMSC_CONFIG_PORT_ADDR 0x3f0 +#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR +#define SMSC_DATA_PORT_ADDR 0x3f1 + +#define SMSC_ENTER_CONFIG_KEY 0x55 +#define SMSC_EXIT_CONFIG_KEY 0xaa + +#define SMCS_LOGICAL_DEV_INDEX 0x07 +#define SMSC_DEVICE_ID_INDEX 0x20 +#define SMSC_DEVICE_REV_INDEX 0x21 +#define SMSC_ACTIVATE_INDEX 0x30 +#define SMSC_PRIMARY_BASE_INDEX 0x60 +#define SMSC_SECONDARY_BASE_INDEX 0x62 +#define SMSC_PRIMARY_INT_INDEX 0x70 +#define SMSC_SECONDARY_INT_INDEX 0x72 + +#define SMSC_IDE1_DEVICE 1 +#define SMSC_KEYBOARD_DEVICE 7 +#define SMSC_CONFIG_REGISTERS 8 + +#define SMSC_SUPERIO_READ_INDEXED(index) ({ \ + outb((index), SMSC_INDEX_PORT_ADDR); \ + inb(SMSC_DATA_PORT_ADDR); }) +#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \ + outb((index), SMSC_INDEX_PORT_ADDR); \ + outb((val), SMSC_DATA_PORT_ADDR); }) + +#define IDE1_PRIMARY_BASE 0x01f0 +#define IDE1_SECONDARY_BASE 0x03f6 + +unsigned long smsc_superio_virt; + +int platform_int_priority[NR_INTC_IRQS] = { + IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */ + RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */ + PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */ + RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */ + TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */ + RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */ + RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */ + RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */ +}; + +static int __init smsc_superio_setup(void) +{ + unsigned char devid, devrev; + + smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO"); + if (!smsc_superio_virt) { + panic("Unable to remap SMSC SuperIO\n"); + } + + /* Initially the chip is in run state */ + /* Put it into configuration state */ + outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); + outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); + + /* Read device ID info */ + devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX); + devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX); + printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev); + + /* Select the keyboard device */ + SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX); + + /* enable it */ + SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + + /* Select the interrupts */ + /* On a PC keyboard is IRQ1, mouse is IRQ12 */ + SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX); + SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX); + +#ifdef CONFIG_IDE + /* + * Only IDE1 exists on the Cayman + */ + + /* Power it on */ + SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22); + + SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX); + SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + + SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8, + SMSC_PRIMARY_BASE_INDEX + 0); + SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff, + SMSC_PRIMARY_BASE_INDEX + 1); + + SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8, + SMSC_SECONDARY_BASE_INDEX + 0); + SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff, + SMSC_SECONDARY_BASE_INDEX + 1); + + SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX); + + SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, + SMCS_LOGICAL_DEV_INDEX); + + SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */ + SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */ + SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */ + SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */ +#endif + + /* Exit the configuration state */ + outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); + + return 0; +} +__initcall(smsc_superio_setup); + +static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len) +{ + if (port < 0x400) { + extern unsigned long smsc_superio_virt; + return (void __iomem *)((port << 2) | smsc_superio_virt); + } + + return (void __iomem *)port; +} + +extern void init_cayman_irq(void); + +static struct sh_machine_vector mv_cayman __initmv = { + .mv_name = "Hitachi Cayman", + .mv_nr_irqs = 64, + .mv_ioport_map = cayman_ioport_map, + .mv_init_irq = init_cayman_irq, +}; diff --git a/arch/sh/boards/mach-dreamcast/Makefile b/arch/sh/boards/mach-dreamcast/Makefile new file mode 100644 index 000000000000..7b97546c7e5f --- /dev/null +++ b/arch/sh/boards/mach-dreamcast/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Sega Dreamcast specific parts of the kernel +# + +obj-y := setup.o irq.o rtc.o + diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c new file mode 100644 index 000000000000..67bdc33dd411 --- /dev/null +++ b/arch/sh/boards/mach-dreamcast/irq.c @@ -0,0 +1,153 @@ +/* + * arch/sh/boards/dreamcast/irq.c + * + * Holly IRQ support for the Sega Dreamcast. + * + * Copyright (c) 2001, 2002 M. R. Brown + * + * This file is part of the LinuxDC project (www.linuxdc.org) + * Released under the terms of the GNU GPL v2.0 + */ + +#include +#include +#include +#include + +/* Dreamcast System ASIC Hardware Events - + + The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving + hardware events from system peripherals and triggering an SH7750 IRQ. + Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are + set in the Event Mask Registers (EMRs). When a hardware event is + triggered, it's corresponding bit in the Event Status Registers (ESRs) + is set, and that bit should be rewritten to the ESR to acknowledge that + event. + + There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908. Event + types can be found in include/asm-sh/dreamcast/sysasic.h. There are three + groups of EMRs that parallel the ESRs. Each EMR group corresponds to an + IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928 + triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9. + + In the kernel, these events are mapped to virtual IRQs so that drivers can + respond to them as they would a normal interrupt. In order to keep this + mapping simple, the events are mapped as: + + 6900/6910 - Events 0-31, IRQ 13 + 6904/6924 - Events 32-63, IRQ 11 + 6908/6938 - Events 64-95, IRQ 9 + +*/ + +#define ESR_BASE 0x005f6900 /* Base event status register */ +#define EMR_BASE 0x005f6910 /* Base event mask register */ + +/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910, + 1 = 0x6920, 2 = 0x6930; also determine the event offset */ +#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32) + +/* Return the hardware event's bit positon within the EMR/ESR */ +#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31) + +/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ + (logically mapped to the corresponding bit for the hardware event). */ + +/* Disable the hardware event by masking its bit in its EMR */ +static inline void disable_systemasic_irq(unsigned int irq) +{ + __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); + __u32 mask; + + mask = inl(emr); + mask &= ~(1 << EVENT_BIT(irq)); + outl(mask, emr); +} + +/* Enable the hardware event by setting its bit in its EMR */ +static inline void enable_systemasic_irq(unsigned int irq) +{ + __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); + __u32 mask; + + mask = inl(emr); + mask |= (1 << EVENT_BIT(irq)); + outl(mask, emr); +} + +/* Acknowledge a hardware event by writing its bit back to its ESR */ +static void ack_systemasic_irq(unsigned int irq) +{ + __u32 esr = ESR_BASE + (LEVEL(irq) << 2); + disable_systemasic_irq(irq); + outl((1 << EVENT_BIT(irq)), esr); +} + +/* After a IRQ has been ack'd and responded to, it needs to be renabled */ +static void end_systemasic_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_systemasic_irq(irq); +} + +static unsigned int startup_systemasic_irq(unsigned int irq) +{ + enable_systemasic_irq(irq); + + return 0; +} + +static void shutdown_systemasic_irq(unsigned int irq) +{ + disable_systemasic_irq(irq); +} + +struct hw_interrupt_type systemasic_int = { + .typename = "System ASIC", + .startup = startup_systemasic_irq, + .shutdown = shutdown_systemasic_irq, + .enable = enable_systemasic_irq, + .disable = disable_systemasic_irq, + .ack = ack_systemasic_irq, + .end = end_systemasic_irq, +}; + +/* + * Map the hardware event indicated by the processor IRQ to a virtual IRQ. + */ +int systemasic_irq_demux(int irq) +{ + __u32 emr, esr, status, level; + __u32 j, bit; + + switch (irq) { + case 13: + level = 0; + break; + case 11: + level = 1; + break; + case 9: + level = 2; + break; + default: + return irq; + } + emr = EMR_BASE + (level << 4) + (level << 2); + esr = ESR_BASE + (level << 2); + + /* Mask the ESR to filter any spurious, unwanted interrupts */ + status = inl(esr); + status &= inl(emr); + + /* Now scan and find the first set bit as the event to map */ + for (bit = 1, j = 0; j < 32; bit <<= 1, j++) { + if (status & bit) { + irq = HW_EVENT_IRQ_BASE + j + (level << 5); + return irq; + } + } + + /* Not reached */ + return irq; +} diff --git a/arch/sh/boards/mach-dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c new file mode 100644 index 000000000000..a7433685798d --- /dev/null +++ b/arch/sh/boards/mach-dreamcast/rtc.c @@ -0,0 +1,81 @@ +/* + * arch/sh/boards/dreamcast/rtc.c + * + * Dreamcast AICA RTC routines. + * + * Copyright (c) 2001, 2002 M. R. Brown + * Copyright (c) 2002 Paul Mundt + * + * Released under the terms of the GNU GPL v2.0. + * + */ + +#include +#include +#include + +/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in + seconds) to get the standard Unix Epoch when getting the time, and add + 20 years when setting the time. */ +#define TWENTY_YEARS ((20 * 365LU + 5) * 86400) + +/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit + registers.*/ +#define AICA_RTC_SECS_H 0xa0710000 +#define AICA_RTC_SECS_L 0xa0710004 + +/** + * aica_rtc_gettimeofday - Get the time from the AICA RTC + * @ts: pointer to resulting timespec + * + * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch. + */ +static void aica_rtc_gettimeofday(struct timespec *ts) +{ + unsigned long val1, val2; + + do { + val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + + val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + } while (val1 != val2); + + ts->tv_sec = val1 - TWENTY_YEARS; + + /* Can't get nanoseconds with just a seconds counter. */ + ts->tv_nsec = 0; +} + +/** + * aica_rtc_settimeofday - Set the AICA RTC to the current time + * @secs: contains the time_t to set + * + * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter. + */ +static int aica_rtc_settimeofday(const time_t secs) +{ + unsigned long val1, val2; + unsigned long adj = secs + TWENTY_YEARS; + + do { + ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H); + ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L); + + val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + + val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + } while (val1 != val2); + + return 0; +} + +void aica_time_init(void) +{ + rtc_sh_get_time = aica_rtc_gettimeofday; + rtc_sh_set_time = aica_rtc_settimeofday; +} + diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c new file mode 100644 index 000000000000..7d944fc75e93 --- /dev/null +++ b/arch/sh/boards/mach-dreamcast/setup.c @@ -0,0 +1,64 @@ +/* + * arch/sh/boards/dreamcast/setup.c + * + * Hardware support for the Sega Dreamcast. + * + * Copyright (c) 2001, 2002 M. R. Brown + * Copyright (c) 2002, 2003, 2004 Paul Mundt + * + * This file is part of the LinuxDC project (www.linuxdc.org) + * + * Released under the terms of the GNU GPL v2.0. + * + * This file originally bore the message (with enclosed-$): + * Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp + * SEGA Dreamcast support + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern struct hw_interrupt_type systemasic_int; +extern void aica_time_init(void); +extern int gapspci_init(void); +extern int systemasic_irq_demux(int); + +static void __init dreamcast_setup(char **cmdline_p) +{ + int i; + + /* Mask all hardware events */ + /* XXX */ + + /* Acknowledge any previous events */ + /* XXX */ + + __set_io_port_base(0xa0000000); + + /* Assign all virtual IRQs to the System ASIC int. handler */ + for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) + irq_desc[i].chip = &systemasic_int; + + board_time_init = aica_time_init; + +#ifdef CONFIG_PCI + if (gapspci_init() < 0) + printk(KERN_WARNING "GAPSPCI was not detected.\n"); +#endif +} + +static struct sh_machine_vector mv_dreamcast __initmv = { + .mv_name = "Sega Dreamcast", + .mv_setup = dreamcast_setup, + .mv_irq_demux = systemasic_irq_demux, +}; diff --git a/arch/sh/boards/mach-edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile new file mode 100644 index 000000000000..14bdd531f116 --- /dev/null +++ b/arch/sh/boards/mach-edosk7705/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the EDOSK7705 specific parts of the kernel +# + +obj-y := setup.o io.o + diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c new file mode 100644 index 000000000000..541cea2a652f --- /dev/null +++ b/arch/sh/boards/mach-edosk7705/io.c @@ -0,0 +1,94 @@ +/* + * arch/sh/boards/renesas/edosk7705/io.c + * + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routines for Hitachi EDOSK7705 board. + * + */ + +#include +#include +#include +#include +#include + +#define SMC_IOADDR 0xA2000000 + +#define maybebadio(name,port) \ + printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ + #name, (port), (__u32) __builtin_return_address(0)) + +/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */ +unsigned long sh_edosk7705_isa_port2addr(unsigned long port) +{ + if (port >= 0x300 && port < 0x320) { + /* SMC91C96 registers are 4 byte aligned rather than the + * usual 2 byte! + */ + return SMC_IOADDR + ( (port - 0x300) * 2); + } + + maybebadio(sh_edosk7705_isa_port2addr, port); + return port; +} + +/* Trying to read / write bytes on odd-byte boundaries to the Ethernet + * registers causes problems. So we bit-shift the value and read / write + * in 2 byte chunks. Setting the low byte to 0 does not cause problems + * now as odd byte writes are only made on the bit mask / interrupt + * register. This may not be the case in future Mar-2003 SJD + */ +unsigned char sh_edosk7705_inb(unsigned long port) +{ + if (port >= 0x300 && port < 0x320 && port & 0x01) { + return (volatile unsigned char)(generic_inw(port -1) >> 8); + } + return *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port); +} + +unsigned int sh_edosk7705_inl(unsigned long port) +{ + return *(volatile unsigned long *)port; +} + +void sh_edosk7705_outb(unsigned char value, unsigned long port) +{ + if (port >= 0x300 && port < 0x320 && port & 0x01) { + generic_outw(((unsigned short)value << 8), port -1); + return; + } + *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port) = value; +} + +void sh_edosk7705_outl(unsigned int value, unsigned long port) +{ + *(volatile unsigned long *)port = value; +} + +void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count) +{ + unsigned char *p = addr; + while (count--) *p++ = sh_edosk7705_inb(port); +} + +void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count) +{ + unsigned long *p = (unsigned long*)addr; + while (count--) + *p++ = *(volatile unsigned long *)port; +} + +void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count) +{ + unsigned char *p = (unsigned char*)addr; + while (count--) sh_edosk7705_outb(*p++, port); +} + +void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count) +{ + unsigned long *p = (unsigned long*)addr; + while (count--) sh_edosk7705_outl(*p++, port); +} + diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c new file mode 100644 index 000000000000..f076c45308dd --- /dev/null +++ b/arch/sh/boards/mach-edosk7705/setup.c @@ -0,0 +1,43 @@ +/* + * arch/sh/boards/renesas/edosk7705/setup.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine Support. + * + * Modified for edosk7705 development + * board by S. Dunn, 2003. + */ +#include +#include +#include + +static void __init sh_edosk7705_init_irq(void) +{ + /* This is the Ethernet interrupt */ + make_imask_irq(0x09); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_edosk7705 __initmv = { + .mv_name = "EDOSK7705", + .mv_nr_irqs = 80, + + .mv_inb = sh_edosk7705_inb, + .mv_inl = sh_edosk7705_inl, + .mv_outb = sh_edosk7705_outb, + .mv_outl = sh_edosk7705_outl, + + .mv_inl_p = sh_edosk7705_inl, + .mv_outl_p = sh_edosk7705_outl, + + .mv_insb = sh_edosk7705_insb, + .mv_insl = sh_edosk7705_insl, + .mv_outsb = sh_edosk7705_outsb, + .mv_outsl = sh_edosk7705_outsl, + + .mv_isa_port2addr = sh_edosk7705_isa_port2addr, + .mv_init_irq = sh_edosk7705_init_irq, +}; diff --git a/arch/sh/boards/mach-highlander/Kconfig b/arch/sh/boards/mach-highlander/Kconfig new file mode 100644 index 000000000000..fc8f28e04ba3 --- /dev/null +++ b/arch/sh/boards/mach-highlander/Kconfig @@ -0,0 +1,24 @@ +if SH_HIGHLANDER + +choice + prompt "Highlander options" + default SH_R7780MP + +config SH_R7780RP + bool "R7780RP-1 board support" + depends on CPU_SUBTYPE_SH7780 + +config SH_R7780MP + bool "R7780MP board support" + depends on CPU_SUBTYPE_SH7780 + help + Selecting this option will enable support for the mass-production + version of the R7780RP. If in doubt, say Y. + +config SH_R7785RP + bool "R7785RP board support" + depends on CPU_SUBTYPE_SH7785 + +endchoice + +endif diff --git a/arch/sh/boards/mach-highlander/Makefile b/arch/sh/boards/mach-highlander/Makefile new file mode 100644 index 000000000000..20a10080b11f --- /dev/null +++ b/arch/sh/boards/mach-highlander/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the R7780RP-1 specific parts of the kernel +# +irqinit-$(CONFIG_SH_R7780MP) := irq-r7780mp.o +irqinit-$(CONFIG_SH_R7785RP) := irq-r7785rp.o +irqinit-$(CONFIG_SH_R7780RP) := irq-r7780rp.o +obj-y := setup.o $(irqinit-y) + +ifneq ($(CONFIG_SH_R7785RP),y) +obj-$(CONFIG_PUSH_SWITCH) += psw.o +endif diff --git a/arch/sh/boards/mach-highlander/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c new file mode 100644 index 000000000000..ae1cfcb29700 --- /dev/null +++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c @@ -0,0 +1,74 @@ +/* + * Renesas Solutions Highlander R7780MP Support. + * + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2007 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +enum { + UNUSED = 0, + + /* board specific interrupt sources */ + CF, /* Compact Flash */ + TP, /* Touch panel */ + SCIF1, /* FPGA SCIF1 */ + SCIF0, /* FPGA SCIF0 */ + SMBUS, /* SMBUS */ + RTC, /* RTC Alarm */ + AX88796, /* Ethernet controller */ + PSW, /* Push Switch */ + + /* external bus connector */ + EXT1, EXT2, EXT4, EXT5, EXT6, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(CF, IRQ_CF), + INTC_IRQ(TP, IRQ_TP), + INTC_IRQ(SCIF1, IRQ_SCIF1), + INTC_IRQ(SCIF0, IRQ_SCIF0), + INTC_IRQ(SMBUS, IRQ_SMBUS), + INTC_IRQ(RTC, IRQ_RTC), + INTC_IRQ(AX88796, IRQ_AX88796), + INTC_IRQ(PSW, IRQ_PSW), + + INTC_IRQ(EXT1, IRQ_EXT1), INTC_IRQ(EXT2, IRQ_EXT2), + INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5), + INTC_IRQ(EXT6, IRQ_EXT6), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa4000000, 0, 16, /* IRLMSK */ + { SCIF0, SCIF1, RTC, 0, CF, 0, TP, SMBUS, + 0, EXT6, EXT5, EXT4, EXT2, EXT1, PSW, AX88796 } }, +}; + +static unsigned char irl2irq[HL_NR_IRL] __initdata = { + 0, IRQ_CF, IRQ_TP, IRQ_SCIF1, + IRQ_SCIF0, IRQ_SMBUS, IRQ_RTC, IRQ_EXT6, + IRQ_EXT5, IRQ_EXT4, IRQ_EXT2, IRQ_EXT1, + 0, IRQ_AX88796, IRQ_PSW, +}; + +static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors, + NULL, mask_registers, NULL, NULL); + +unsigned char * __init highlander_plat_irq_setup(void) +{ + if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) { + printk(KERN_INFO "Using r7780mp interrupt controller.\n"); + register_intc_controller(&intc_desc); + return irl2irq; + } + + return NULL; +} diff --git a/arch/sh/boards/mach-highlander/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c new file mode 100644 index 000000000000..9d3921fe27c0 --- /dev/null +++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c @@ -0,0 +1,67 @@ +/* + * Renesas Solutions Highlander R7780RP-1 Support. + * + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2008 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +enum { + UNUSED = 0, + + /* board specific interrupt sources */ + + AX88796, /* Ethernet controller */ + PSW, /* Push Switch */ + CF, /* Compact Flash */ + + PCI_A, + PCI_B, + PCI_C, + PCI_D, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(PCI_A, 65), /* dirty: overwrite cpu vectors for pci */ + INTC_IRQ(PCI_B, 66), + INTC_IRQ(PCI_C, 67), + INTC_IRQ(PCI_D, 68), + INTC_IRQ(CF, IRQ_CF), + INTC_IRQ(PSW, IRQ_PSW), + INTC_IRQ(AX88796, IRQ_AX88796), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa5000000, 0, 16, /* IRLMSK */ + { PCI_A, PCI_B, PCI_C, PCI_D, CF, 0, 0, 0, + 0, 0, 0, 0, 0, 0, PSW, AX88796 } }, +}; + +static unsigned char irl2irq[HL_NR_IRL] __initdata = { + 65, 66, 67, 68, + IRQ_CF, 0, 0, 0, + 0, 0, 0, 0, + IRQ_AX88796, IRQ_PSW +}; + +static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors, + NULL, mask_registers, NULL, NULL); + +unsigned char * __init highlander_plat_irq_setup(void) +{ + if (ctrl_inw(0xa5000600)) { + printk(KERN_INFO "Using r7780rp interrupt controller.\n"); + register_intc_controller(&intc_desc); + return irl2irq; + } + + return NULL; +} diff --git a/arch/sh/boards/mach-highlander/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c new file mode 100644 index 000000000000..896c045aa39d --- /dev/null +++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c @@ -0,0 +1,86 @@ +/* + * Renesas Solutions Highlander R7785RP Support. + * + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2006 - 2008 Paul Mundt + * Copyright (C) 2007 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +enum { + UNUSED = 0, + + /* FPGA specific interrupt sources */ + CF, /* Compact Flash */ + SMBUS, /* SMBUS */ + TP, /* Touch panel */ + RTC, /* RTC Alarm */ + TH_ALERT, /* Temperature sensor */ + AX88796, /* Ethernet controller */ + + /* external bus connector */ + EXT0, EXT1, EXT2, EXT3, EXT4, EXT5, EXT6, EXT7, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(CF, IRQ_CF), + INTC_IRQ(SMBUS, IRQ_SMBUS), + INTC_IRQ(TP, IRQ_TP), + INTC_IRQ(RTC, IRQ_RTC), + INTC_IRQ(TH_ALERT, IRQ_TH_ALERT), + + INTC_IRQ(EXT0, IRQ_EXT0), INTC_IRQ(EXT1, IRQ_EXT1), + INTC_IRQ(EXT2, IRQ_EXT2), INTC_IRQ(EXT3, IRQ_EXT3), + + INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5), + INTC_IRQ(EXT6, IRQ_EXT6), INTC_IRQ(EXT7, IRQ_EXT7), + + INTC_IRQ(AX88796, IRQ_AX88796), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa4000010, 0, 16, /* IRLMCR1 */ + { 0, 0, 0, 0, CF, AX88796, SMBUS, TP, + RTC, 0, TH_ALERT, 0, 0, 0, 0, 0 } }, + { 0xa4000012, 0, 16, /* IRLMCR2 */ + { 0, 0, 0, 0, 0, 0, 0, 0, + EXT7, EXT6, EXT5, EXT4, EXT3, EXT2, EXT1, EXT0 } }, +}; + +static unsigned char irl2irq[HL_NR_IRL] __initdata = { + 0, IRQ_CF, IRQ_EXT4, IRQ_EXT5, + IRQ_EXT6, IRQ_EXT7, IRQ_SMBUS, IRQ_TP, + IRQ_RTC, IRQ_TH_ALERT, IRQ_AX88796, IRQ_EXT0, + IRQ_EXT1, IRQ_EXT2, IRQ_EXT3, +}; + +static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors, + NULL, mask_registers, NULL, NULL); + +unsigned char * __init highlander_plat_irq_setup(void) +{ + if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000) + return NULL; + + printk(KERN_INFO "Using r7785rp interrupt controller.\n"); + + ctrl_outw(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */ + + /* Setup the FPGA IRL */ + ctrl_outw(0x0000, PA_IRLPRA); /* FPGA IRLA */ + ctrl_outw(0xe598, PA_IRLPRB); /* FPGA IRLB */ + ctrl_outw(0x7060, PA_IRLPRC); /* FPGA IRLC */ + ctrl_outw(0x0000, PA_IRLPRD); /* FPGA IRLD */ + ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */ + ctrl_outw(0xdcba, PA_IRLPRF); /* FPGA IRLF */ + + register_intc_controller(&intc_desc); + return irl2irq; +} diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c new file mode 100644 index 000000000000..0b3e062e96cc --- /dev/null +++ b/arch/sh/boards/mach-highlander/psw.c @@ -0,0 +1,122 @@ +/* + * arch/sh/boards/renesas/r7780rp/psw.c + * + * push switch support for RDBRP-1/RDBREVRP-1 debug boards. + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +static irqreturn_t psw_irq_handler(int irq, void *arg) +{ + struct platform_device *pdev = arg; + struct push_switch *psw = platform_get_drvdata(pdev); + struct push_switch_platform_info *psw_info = pdev->dev.platform_data; + unsigned int l, mask; + int ret = 0; + + l = ctrl_inw(PA_DBSW); + + /* Nothing to do if there's no state change */ + if (psw->state) { + ret = 1; + goto out; + } + + mask = l & 0x70; + /* Figure out who raised it */ + if (mask & (1 << psw_info->bit)) { + psw->state = !!(mask & (1 << psw_info->bit)); + if (psw->state) /* debounce */ + mod_timer(&psw->debounce, jiffies + 50); + + ret = 1; + } + +out: + /* Clear the switch IRQs */ + l |= (0x7 << 12); + ctrl_outw(l, PA_DBSW); + + return IRQ_RETVAL(ret); +} + +static struct resource psw_resources[] = { + [0] = { + .start = IRQ_PSW, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct push_switch_platform_info s2_platform_data = { + .name = "s2", + .bit = 6, + .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct platform_device s2_switch_device = { + .name = "push-switch", + .id = 0, + .num_resources = ARRAY_SIZE(psw_resources), + .resource = psw_resources, + .dev = { + .platform_data = &s2_platform_data, + }, +}; + +static struct push_switch_platform_info s3_platform_data = { + .name = "s3", + .bit = 5, + .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct platform_device s3_switch_device = { + .name = "push-switch", + .id = 1, + .num_resources = ARRAY_SIZE(psw_resources), + .resource = psw_resources, + .dev = { + .platform_data = &s3_platform_data, + }, +}; + +static struct push_switch_platform_info s4_platform_data = { + .name = "s4", + .bit = 4, + .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct platform_device s4_switch_device = { + .name = "push-switch", + .id = 2, + .num_resources = ARRAY_SIZE(psw_resources), + .resource = psw_resources, + .dev = { + .platform_data = &s4_platform_data, + }, +}; + +static struct platform_device *psw_devices[] = { + &s2_switch_device, &s3_switch_device, &s4_switch_device, +}; + +static int __init psw_init(void) +{ + return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices)); +} +module_init(psw_init); diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c new file mode 100644 index 000000000000..bc79afb6fc4c --- /dev/null +++ b/arch/sh/boards/mach-highlander/setup.c @@ -0,0 +1,345 @@ +/* + * arch/sh/boards/renesas/r7780rp/setup.c + * + * Renesas Solutions Highlander Support. + * + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2005 - 2008 Paul Mundt + * + * This contains support for the R7780RP-1, R7780MP, and R7785RP + * Highlander modules. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct resource r8a66597_usb_host_resources[] = { + [0] = { + .name = "r8a66597_hcd", + .start = 0xA4200000, + .end = 0xA42000FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "r8a66597_hcd", + .start = IRQ_EXT1, /* irq number */ + .end = IRQ_EXT1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device r8a66597_usb_host_device = { + .name = "r8a66597_hcd", + .id = -1, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), + .resource = r8a66597_usb_host_resources, +}; + +static struct resource m66592_usb_peripheral_resources[] = { + [0] = { + .name = "m66592_udc", + .start = 0xb0000000, + .end = 0xb00000FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "m66592_udc", + .start = IRQ_EXT4, /* irq number */ + .end = IRQ_EXT4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device m66592_usb_peripheral_device = { + .name = "m66592_udc", + .id = -1, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources), + .resource = m66592_usb_peripheral_resources, +}; + +static struct resource cf_ide_resources[] = { + [0] = { + .start = PA_AREA5_IO + 0x1000, + .end = PA_AREA5_IO + 0x1000 + 0x08 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PA_AREA5_IO + 0x80c, + .end = PA_AREA5_IO + 0x80c + 0x16 - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_CF, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct pata_platform_info pata_info = { + .ioport_shift = 1, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, + .dev = { + .platform_data = &pata_info, + }, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_OBLED, + .end = PA_OBLED, + .flags = IORESOURCE_MEM, + }, +}; + +#ifndef CONFIG_SH_R7785RP +static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 }; + +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), +}; +#endif + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + + /* R7785RP has a slightly more sensible FPGA.. */ +#ifndef CONFIG_SH_R7785RP + .dev = { + .platform_data = &heartbeat_data, + }, +#endif + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct ax_plat_data ax88796_platdata = { + .flags = AXFLG_HAS_93CX6, + .wordlength = 2, + .dcr_val = 0x1, + .rcr_val = 0x40, +}; + +static struct resource ax88796_resources[] = { + { +#ifdef CONFIG_SH_R7780RP + .start = 0xa5800400, + .end = 0xa5800400 + (0x20 * 0x2) - 1, +#else + .start = 0xa4100400, + .end = 0xa4100400 + (0x20 * 0x2) - 1, +#endif + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_AX88796, + .end = IRQ_AX88796, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ax88796_device = { + .name = "ax88796", + .id = 0, + + .dev = { + .platform_data = &ax88796_platdata, + }, + + .num_resources = ARRAY_SIZE(ax88796_resources), + .resource = ax88796_resources, +}; + +static struct resource smbus_resources[] = { + [0] = { + .start = PA_SMCR, + .end = PA_SMCR + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SMBUS, + .end = IRQ_SMBUS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smbus_device = { + .name = "i2c-highlander", + .id = 0, + .num_resources = ARRAY_SIZE(smbus_resources), + .resource = smbus_resources, +}; + +static struct i2c_board_info __initdata highlander_i2c_devices[] = { + { + I2C_BOARD_INFO("r2025sd", 0x32), + }, +}; + +static struct platform_device *r7780rp_devices[] __initdata = { + &r8a66597_usb_host_device, + &m66592_usb_peripheral_device, + &heartbeat_device, + &smbus_device, +#ifndef CONFIG_SH_R7780RP + &ax88796_device, +#endif +}; + +/* + * The CF is connected using a 16-bit bus where 8-bit operations are + * unsupported. The linux ata driver is however using 8-bit operations, so + * insert a trapped io filter to convert 8-bit operations into 16-bit. + */ +static struct trapped_io cf_trapped_io = { + .resource = cf_ide_resources, + .num_resources = 2, + .minimum_bus_width = 16, +}; + +static int __init r7780rp_devices_setup(void) +{ + int ret = 0; + +#ifndef CONFIG_SH_R7780RP + if (register_trapped_io(&cf_trapped_io) == 0) + ret |= platform_device_register(&cf_ide_device); +#endif + + ret |= platform_add_devices(r7780rp_devices, + ARRAY_SIZE(r7780rp_devices)); + + ret |= i2c_register_board_info(0, highlander_i2c_devices, + ARRAY_SIZE(highlander_i2c_devices)); + + return ret; +} +device_initcall(r7780rp_devices_setup); + +/* + * Platform specific clocks + */ +static void ivdr_clk_enable(struct clk *clk) +{ + ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL); +} + +static void ivdr_clk_disable(struct clk *clk) +{ + ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL); +} + +static struct clk_ops ivdr_clk_ops = { + .enable = ivdr_clk_enable, + .disable = ivdr_clk_disable, +}; + +static struct clk ivdr_clk = { + .name = "ivdr_clk", + .ops = &ivdr_clk_ops, +}; + +static struct clk *r7780rp_clocks[] = { + &ivdr_clk, +}; + +static void r7780rp_power_off(void) +{ + if (mach_is_r7780mp() || mach_is_r7785rp()) + ctrl_outw(0x0001, PA_POFF); +} + +/* + * Initialize the board + */ +static void __init highlander_setup(char **cmdline_p) +{ + u16 ver = ctrl_inw(PA_VERREG); + int i; + + printk(KERN_INFO "Renesas Solutions Highlander %s support.\n", + mach_is_r7780rp() ? "R7780RP-1" : + mach_is_r7780mp() ? "R7780MP" : + "R7785RP"); + + printk(KERN_INFO "Board version: %d (revision %d), " + "FPGA version: %d (revision %d)\n", + (ver >> 12) & 0xf, (ver >> 8) & 0xf, + (ver >> 4) & 0xf, ver & 0xf); + + /* + * Enable the important clocks right away.. + */ + for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) { + struct clk *clk = r7780rp_clocks[i]; + + clk_register(clk); + clk_enable(clk); + } + + ctrl_outw(0x0000, PA_OBLED); /* Clear LED. */ + + if (mach_is_r7780rp()) + ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */ + + ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */ + + pm_power_off = r7780rp_power_off; +} + +static unsigned char irl2irq[HL_NR_IRL]; + +static int highlander_irq_demux(int irq) +{ + if (irq >= HL_NR_IRL || !irl2irq[irq]) + return irq; + + return irl2irq[irq]; +} + +static void __init highlander_init_irq(void) +{ + unsigned char *ucp = highlander_plat_irq_setup(); + + if (ucp) { + plat_irq_setup_pins(IRQ_MODE_IRL3210); + memcpy(irl2irq, ucp, HL_NR_IRL); + } +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_highlander __initmv = { + .mv_name = "Highlander", + .mv_setup = highlander_setup, + .mv_init_irq = highlander_init_irq, + .mv_irq_demux = highlander_irq_demux, +}; diff --git a/arch/sh/boards/mach-hp6xx/Makefile b/arch/sh/boards/mach-hp6xx/Makefile new file mode 100644 index 000000000000..b3124278247c --- /dev/null +++ b/arch/sh/boards/mach-hp6xx/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the HP6xx specific parts of the kernel +# + +obj-y := setup.o +obj-$(CONFIG_PM) += pm.o pm_wakeup.o +obj-$(CONFIG_APM_EMULATION) += hp6xx_apm.o diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c new file mode 100644 index 000000000000..177f4f028e0d --- /dev/null +++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c @@ -0,0 +1,111 @@ +/* + * bios-less APM driver for hp680 + * + * Copyright 2005 (c) Andriy Skulysh + * Copyright 2008 (c) Kristoffer Ericson + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +/* percentage values */ +#define APM_CRITICAL 10 +#define APM_LOW 30 + +/* resonably sane values */ +#define HP680_BATTERY_MAX 898 +#define HP680_BATTERY_MIN 486 +#define HP680_BATTERY_AC_ON 1023 + +#define MODNAME "hp6x0_apm" + +#define PGDR 0xa400012c + +static void hp6x0_apm_get_power_status(struct apm_power_info *info) +{ + int battery, backup, charging, percentage; + u8 pgdr; + + battery = adc_single(ADC_CHANNEL_BATTERY); + backup = adc_single(ADC_CHANNEL_BACKUP); + charging = adc_single(ADC_CHANNEL_CHARGE); + + percentage = 100 * (battery - HP680_BATTERY_MIN) / + (HP680_BATTERY_MAX - HP680_BATTERY_MIN); + + /* % of full battery */ + info->battery_life = percentage; + + /* We want our estimates in minutes */ + info->units = 0; + + /* Extremely(!!) rough estimate, we will replace this with a datalist later on */ + info->time = (2 * battery); + + info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ? + APM_AC_ONLINE : APM_AC_OFFLINE; + + pgdr = ctrl_inb(PGDR); + if (pgdr & PGDR_MAIN_BATTERY_OUT) { + info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT; + info->battery_flag = 0x80; + } else if (charging < 8) { + info->battery_status = APM_BATTERY_STATUS_CHARGING; + info->battery_flag = 0x08; + info->ac_line_status = 0x01; + } else if (percentage <= APM_CRITICAL) { + info->battery_status = APM_BATTERY_STATUS_CRITICAL; + info->battery_flag = 0x04; + } else if (percentage <= APM_LOW) { + info->battery_status = APM_BATTERY_STATUS_LOW; + info->battery_flag = 0x02; + } else { + info->battery_status = APM_BATTERY_STATUS_HIGH; + info->battery_flag = 0x01; + } +} + +static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev) +{ + if (!APM_DISABLED) + apm_queue_event(APM_USER_SUSPEND); + + return IRQ_HANDLED; +} + +static int __init hp6x0_apm_init(void) +{ + int ret; + + ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt, + IRQF_DISABLED, MODNAME, NULL); + if (unlikely(ret < 0)) { + printk(KERN_ERR MODNAME ": IRQ %d request failed\n", + HP680_BTN_IRQ); + return ret; + } + + apm_get_power_status = hp6x0_apm_get_power_status; + + return ret; +} + +static void __exit hp6x0_apm_exit(void) +{ + free_irq(HP680_BTN_IRQ, 0); +} + +module_init(hp6x0_apm_init); +module_exit(hp6x0_apm_exit); + +MODULE_AUTHOR("Adriy Skulysh"); +MODULE_DESCRIPTION("hp6xx Advanced Power Management"); +MODULE_LICENSE("GPL"); diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c new file mode 100644 index 000000000000..e96684def788 --- /dev/null +++ b/arch/sh/boards/mach-hp6xx/pm.c @@ -0,0 +1,81 @@ +/* + * hp6x0 Power Management Routines + * + * Copyright (c) 2006 Andriy Skulysh + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define STBCR 0xffffff82 +#define STBCR2 0xffffff88 + +static int hp6x0_pm_enter(suspend_state_t state) +{ + u8 stbcr, stbcr2; +#ifdef CONFIG_HD64461_ENABLER + u8 scr; + u16 hd64461_stbcr; +#endif + +#ifdef CONFIG_HD64461_ENABLER + outb(0, HD64461_PCC1CSCIER); + + scr = inb(HD64461_PCC1SCR); + scr |= HD64461_PCCSCR_VCC1; + outb(scr, HD64461_PCC1SCR); + + hd64461_stbcr = inw(HD64461_STBCR); + hd64461_stbcr |= HD64461_STBCR_SPC1ST; + outw(hd64461_stbcr, HD64461_STBCR); +#endif + + ctrl_outb(0x1f, DACR); + + stbcr = ctrl_inb(STBCR); + ctrl_outb(0x01, STBCR); + + stbcr2 = ctrl_inb(STBCR2); + ctrl_outb(0x7f , STBCR2); + + outw(0xf07f, HD64461_SCPUCR); + + pm_enter(); + + outw(0, HD64461_SCPUCR); + ctrl_outb(stbcr, STBCR); + ctrl_outb(stbcr2, STBCR2); + +#ifdef CONFIG_HD64461_ENABLER + hd64461_stbcr = inw(HD64461_STBCR); + hd64461_stbcr &= ~HD64461_STBCR_SPC1ST; + outw(hd64461_stbcr, HD64461_STBCR); + + outb(0x4c, HD64461_PCC1CSCIER); + outb(0x00, HD64461_PCC1CSCR); +#endif + + return 0; +} + +static struct platform_suspend_ops hp6x0_pm_ops = { + .enter = hp6x0_pm_enter, + .valid = suspend_valid_only_mem, +}; + +static int __init hp6x0_pm_init(void) +{ + suspend_set_ops(&hp6x0_pm_ops); + return 0; +} + +late_initcall(hp6x0_pm_init); diff --git a/arch/sh/boards/mach-hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S new file mode 100644 index 000000000000..44b648cf6f23 --- /dev/null +++ b/arch/sh/boards/mach-hp6xx/pm_wakeup.S @@ -0,0 +1,58 @@ +/* + * Copyright (c) 2006 Andriy Skulysh + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#include +#include + +#define k0 r0 +#define k1 r1 +#define k2 r2 +#define k3 r3 +#define k4 r4 + +/* + * Kernel mode register usage: + * k0 scratch + * k1 scratch + * k2 scratch (Exception code) + * k3 scratch (Return address) + * k4 scratch + * k5 reserved + * k6 Global Interrupt Mask (0--15 << 4) + * k7 CURRENT_THREAD_INFO (pointer to current thread info) + */ + +ENTRY(wakeup_start) +! clear STBY bit + mov #-126, k2 + and #127, k0 + mov.b k0, @k2 +! enable refresh + mov.l 5f, k1 + mov.w 6f, k0 + mov.w k0, @k1 +! jump to handler + mov.l 2f, k2 + mov.l 3f, k3 + mov.l @k2, k2 + + mov.l 4f, k1 + jmp @k1 + nop + + .align 2 +1: .long EXPEVT +2: .long INTEVT +3: .long ret_from_irq +4: .long handle_exception +5: .long 0xffffff68 +6: .word 0x0524 + +ENTRY(wakeup_end) + nop diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c new file mode 100644 index 000000000000..475b46caec1f --- /dev/null +++ b/arch/sh/boards/mach-hp6xx/setup.c @@ -0,0 +1,121 @@ +/* + * linux/arch/sh/boards/hp6xx/setup.c + * + * Copyright (C) 2002 Andriy Skulysh + * Copyright (C) 2007 Kristoffer Ericson + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only) + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define SCPCR 0xa4000116 +#define SCPDR 0xa4000136 + +/* CF Slot */ +static struct resource cf_ide_resources[] = { + [0] = { + .start = 0x15000000 + 0x1f0, + .end = 0x15000000 + 0x1f0 + 0x08 - 0x01, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x15000000 + 0x1fe, + .end = 0x15000000 + 0x1fe + 0x01, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = 77, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, +}; + +static struct platform_device jornadakbd_device = { + .name = "jornada680_kbd", + .id = -1, +}; + +static struct platform_device *hp6xx_devices[] __initdata = { + &cf_ide_device, + &jornadakbd_device, +}; + +static void __init hp6xx_init_irq(void) +{ + /* Gets touchscreen and powerbutton IRQ working */ + plat_irq_setup_pins(IRQ_MODE_IRQ); +} + +static int __init hp6xx_devices_setup(void) +{ + return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices)); +} + +static void __init hp6xx_setup(char **cmdline_p) +{ + u8 v8; + u16 v; + + v = inw(HD64461_STBCR); + v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST | + HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST | + HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST | + HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST| + HD64461_STBCR_SAFECKE_IST; +#ifndef CONFIG_HD64461_ENABLER + v |= HD64461_STBCR_SPC1ST; +#endif + outw(v, HD64461_STBCR); + v = inw(HD64461_GPADR); + v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0; + outw(v, HD64461_GPADR); + + outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR); + +#ifndef CONFIG_HD64461_ENABLER + outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR); +#endif + + sh_dac_output(0, DAC_SPEAKER_VOLUME); + sh_dac_disable(DAC_SPEAKER_VOLUME); + v8 = ctrl_inb(DACR); + v8 &= ~DACR_DAE; + ctrl_outb(v8,DACR); + + v8 = ctrl_inb(SCPDR); + v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y; + v8 &= ~SCPDR_TS_SCAN_ENABLE; + ctrl_outb(v8, SCPDR); + + v = ctrl_inw(SCPCR); + v &= ~SCPCR_TS_MASK; + v |= SCPCR_TS_ENABLE; + ctrl_outw(v, SCPCR); +} +device_initcall(hp6xx_devices_setup); + +static struct sh_machine_vector mv_hp6xx __initmv = { + .mv_name = "hp6xx", + .mv_setup = hp6xx_setup, + /* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */ + .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6, + .mv_irq_demux = hd64461_irq_demux, + /* Enable IRQ0 -> IRQ3 in IRQ_MODE */ + .mv_init_irq = hp6xx_init_irq, +}; diff --git a/arch/sh/boards/mach-landisk/Makefile b/arch/sh/boards/mach-landisk/Makefile new file mode 100644 index 000000000000..a696b4277fa9 --- /dev/null +++ b/arch/sh/boards/mach-landisk/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for I-O DATA DEVICE, INC. "LANDISK Series" +# + +obj-y := setup.o irq.o psw.o gio.o diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c new file mode 100644 index 000000000000..edcde082032d --- /dev/null +++ b/arch/sh/boards/mach-landisk/gio.c @@ -0,0 +1,171 @@ +/* + * arch/sh/boards/landisk/gio.c - driver for landisk + * + * This driver will also support the I-O DATA Device, Inc. LANDISK Board. + * LANDISK and USL-5P Button, LED and GIO driver drive function. + * + * Copylight (C) 2006 kogiidena + * Copylight (C) 2002 Atom Create Engineering Co., Ltd. * + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DEVCOUNT 4 +#define GIO_MINOR 2 /* GIO minor no. */ + +static dev_t dev; +static struct cdev *cdev_p; +static int openCnt; + +static int gio_open(struct inode *inode, struct file *filp) +{ + int minor; + int ret = -ENOENT; + + lock_kernel(); + minor = MINOR(inode->i_rdev); + if (minor < DEVCOUNT) { + if (openCnt > 0) { + ret = -EALREADY; + } else { + openCnt++; + ret = 0; + } + } + unlock_kernel(); + return ret; +} + +static int gio_close(struct inode *inode, struct file *filp) +{ + int minor; + + minor = MINOR(inode->i_rdev); + if (minor < DEVCOUNT) { + openCnt--; + } + return 0; +} + +static int gio_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + unsigned int data; + static unsigned int addr = 0; + + if (cmd & 0x01) { /* write */ + if (copy_from_user(&data, (int *)arg, sizeof(int))) { + return -EFAULT; + } + } + + switch (cmd) { + case GIODRV_IOCSGIOSETADDR: /* address set */ + addr = data; + break; + + case GIODRV_IOCSGIODATA1: /* write byte */ + ctrl_outb((unsigned char)(0x0ff & data), addr); + break; + + case GIODRV_IOCSGIODATA2: /* write word */ + if (addr & 0x01) { + return -EFAULT; + } + ctrl_outw((unsigned short int)(0x0ffff & data), addr); + break; + + case GIODRV_IOCSGIODATA4: /* write long */ + if (addr & 0x03) { + return -EFAULT; + } + ctrl_outl(data, addr); + break; + + case GIODRV_IOCGGIODATA1: /* read byte */ + data = ctrl_inb(addr); + break; + + case GIODRV_IOCGGIODATA2: /* read word */ + if (addr & 0x01) { + return -EFAULT; + } + data = ctrl_inw(addr); + break; + + case GIODRV_IOCGGIODATA4: /* read long */ + if (addr & 0x03) { + return -EFAULT; + } + data = ctrl_inl(addr); + break; + default: + return -EFAULT; + break; + } + + if ((cmd & 0x01) == 0) { /* read */ + if (copy_to_user((int *)arg, &data, sizeof(int))) { + return -EFAULT; + } + } + return 0; +} + +static const struct file_operations gio_fops = { + .owner = THIS_MODULE, + .open = gio_open, /* open */ + .release = gio_close, /* release */ + .ioctl = gio_ioctl, /* ioctl */ +}; + +static int __init gio_init(void) +{ + int error; + + printk(KERN_INFO "gio: driver initialized\n"); + + openCnt = 0; + + if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) { + printk(KERN_ERR + "gio: Couldn't alloc_chrdev_region, error=%d\n", + error); + return 1; + } + + cdev_p = cdev_alloc(); + cdev_p->ops = &gio_fops; + error = cdev_add(cdev_p, dev, DEVCOUNT); + if (error) { + printk(KERN_ERR + "gio: Couldn't cdev_add, error=%d\n", error); + return 1; + } + + return 0; +} + +static void __exit gio_exit(void) +{ + cdev_del(cdev_p); + unregister_chrdev_region(dev, DEVCOUNT); +} + +module_init(gio_init); +module_exit(gio_exit); + +MODULE_LICENSE("GPL"); diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c new file mode 100644 index 000000000000..d0f9378f6ff4 --- /dev/null +++ b/arch/sh/boards/mach-landisk/irq.c @@ -0,0 +1,56 @@ +/* + * arch/sh/boards/landisk/irq.c + * + * I-O DATA Device, Inc. LANDISK Support + * + * Copyright (C) 2005-2007 kogiidena + * + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +static void disable_landisk_irq(unsigned int irq) +{ + unsigned char mask = 0xff ^ (0x01 << (irq - 5)); + + ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK); +} + +static void enable_landisk_irq(unsigned int irq) +{ + unsigned char value = (0x01 << (irq - 5)); + + ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK); +} + +static struct irq_chip landisk_irq_chip __read_mostly = { + .name = "LANDISK", + .mask = disable_landisk_irq, + .unmask = enable_landisk_irq, + .mask_ack = disable_landisk_irq, +}; + +/* + * Initialize IRQ setting + */ +void __init init_landisk_IRQ(void) +{ + int i; + + for (i = 5; i < 14; i++) { + disable_irq_nosync(i); + set_irq_chip_and_handler_name(i, &landisk_irq_chip, + handle_level_irq, "level"); + enable_landisk_irq(i); + } + ctrl_outb(0x00, PA_PWRINT_CLR); +} diff --git a/arch/sh/boards/mach-landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c new file mode 100644 index 000000000000..4bd502cbaeeb --- /dev/null +++ b/arch/sh/boards/mach-landisk/psw.c @@ -0,0 +1,143 @@ +/* + * arch/sh/boards/landisk/psw.c + * + * push switch support for LANDISK and USL-5P + * + * Copyright (C) 2006-2007 Paul Mundt + * Copyright (C) 2007 kogiidena + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +static irqreturn_t psw_irq_handler(int irq, void *arg) +{ + struct platform_device *pdev = arg; + struct push_switch *psw = platform_get_drvdata(pdev); + struct push_switch_platform_info *psw_info = pdev->dev.platform_data; + unsigned int sw_value; + int ret = 0; + + sw_value = (0x0ff & (~ctrl_inb(PA_STATUS))); + + /* Nothing to do if there's no state change */ + if (psw->state) { + ret = 1; + goto out; + } + + /* Figure out who raised it */ + if (sw_value & (1 << psw_info->bit)) { + psw->state = 1; + mod_timer(&psw->debounce, jiffies + 50); + ret = 1; + } + +out: + /* Clear the switch IRQs */ + ctrl_outb(0x00, PA_PWRINT_CLR); + + return IRQ_RETVAL(ret); +} + +static struct resource psw_power_resources[] = { + [0] = { + .start = IRQ_POWER, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource psw_usl5p_resources[] = { + [0] = { + .start = IRQ_BUTTON, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct push_switch_platform_info psw_power_platform_data = { + .name = "psw_power", + .bit = 4, + .irq_flags = IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct push_switch_platform_info psw1_platform_data = { + .name = "psw1", + .bit = 0, + .irq_flags = IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct push_switch_platform_info psw2_platform_data = { + .name = "psw2", + .bit = 2, + .irq_flags = IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct push_switch_platform_info psw3_platform_data = { + .name = "psw3", + .bit = 1, + .irq_flags = IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct platform_device psw_power_switch_device = { + .name = "push-switch", + .id = 0, + .num_resources = ARRAY_SIZE(psw_power_resources), + .resource = psw_power_resources, + .dev = { + .platform_data = &psw_power_platform_data, + }, +}; + +static struct platform_device psw1_switch_device = { + .name = "push-switch", + .id = 1, + .num_resources = ARRAY_SIZE(psw_usl5p_resources), + .resource = psw_usl5p_resources, + .dev = { + .platform_data = &psw1_platform_data, + }, +}; + +static struct platform_device psw2_switch_device = { + .name = "push-switch", + .id = 2, + .num_resources = ARRAY_SIZE(psw_usl5p_resources), + .resource = psw_usl5p_resources, + .dev = { + .platform_data = &psw2_platform_data, + }, +}; + +static struct platform_device psw3_switch_device = { + .name = "push-switch", + .id = 3, + .num_resources = ARRAY_SIZE(psw_usl5p_resources), + .resource = psw_usl5p_resources, + .dev = { + .platform_data = &psw3_platform_data, + }, +}; + +static struct platform_device *psw_devices[] = { + &psw_power_switch_device, + &psw1_switch_device, + &psw2_switch_device, + &psw3_switch_device, +}; + +static int __init psw_init(void) +{ + return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices)); +} +module_init(psw_init); diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c new file mode 100644 index 000000000000..470c78111681 --- /dev/null +++ b/arch/sh/boards/mach-landisk/setup.c @@ -0,0 +1,105 @@ +/* + * arch/sh/boards/landisk/setup.c + * + * I-O DATA Device, Inc. LANDISK Support. + * + * Copyright (C) 2000 Kazumoto Kojima + * Copyright (C) 2002 Paul Mundt + * Copylight (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2005-2007 kogiidena + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +void init_landisk_IRQ(void); + +static void landisk_power_off(void) +{ + ctrl_outb(0x01, PA_SHUTDOWN); +} + +static struct resource cf_ide_resources[3]; + +static struct pata_platform_info pata_info = { + .ioport_shift = 1, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, + .dev = { + .platform_data = &pata_info, + }, +}; + +static struct platform_device rtc_device = { + .name = "rs5c313", + .id = -1, +}; + +static struct platform_device *landisk_devices[] __initdata = { + &cf_ide_device, + &rtc_device, +}; + +static int __init landisk_devices_setup(void) +{ + pgprot_t prot; + unsigned long paddrbase; + void *cf_ide_base; + + /* open I/O area window */ + paddrbase = virt_to_phys((void *)PA_AREA5_IO); + prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16); + cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot); + if (!cf_ide_base) { + printk("allocate_cf_area : can't open CF I/O window!\n"); + return -ENOMEM; + } + + /* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */ + cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40; + cf_ide_resources[0].end = (unsigned long)cf_ide_base + 0x40 + 0x0f; + cf_ide_resources[0].flags = IORESOURCE_IO; + cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c; + cf_ide_resources[1].end = (unsigned long)cf_ide_base + 0x2c + 0x03; + cf_ide_resources[1].flags = IORESOURCE_IO; + cf_ide_resources[2].start = IRQ_FATA; + cf_ide_resources[2].flags = IORESOURCE_IRQ; + + return platform_add_devices(landisk_devices, + ARRAY_SIZE(landisk_devices)); +} + +__initcall(landisk_devices_setup); + +static void __init landisk_setup(char **cmdline_p) +{ + /* LED ON */ + ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED); + + printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n"); + pm_power_off = landisk_power_off; +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_landisk __initmv = { + .mv_name = "LANDISK", + .mv_nr_irqs = 72, + .mv_setup = landisk_setup, + .mv_init_irq = init_landisk_IRQ, +}; diff --git a/arch/sh/boards/mach-lboxre2/Makefile b/arch/sh/boards/mach-lboxre2/Makefile new file mode 100644 index 000000000000..e9ed140c06f6 --- /dev/null +++ b/arch/sh/boards/mach-lboxre2/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the L-BOX RE2 specific parts of the kernel +# Copyright (c) 2007 Nobuhiro Iwamatsu + +obj-y := setup.o irq.o diff --git a/arch/sh/boards/mach-lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c new file mode 100644 index 000000000000..5a1c3bbe7b50 --- /dev/null +++ b/arch/sh/boards/mach-lboxre2/irq.c @@ -0,0 +1,31 @@ +/* + * linux/arch/sh/boards/lboxre2/irq.c + * + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * NTT COMWARE L-BOX RE2 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include +#include +#include +#include +#include +#include + +/* + * Initialize IRQ setting + */ +void __init init_lboxre2_IRQ(void) +{ + make_imask_irq(IRQ_CF1); + make_imask_irq(IRQ_CF0); + make_imask_irq(IRQ_INTD); + make_imask_irq(IRQ_ETH1); + make_imask_irq(IRQ_ETH0); + make_imask_irq(IRQ_INTA); +} diff --git a/arch/sh/boards/mach-lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c new file mode 100644 index 000000000000..c74440d38ee9 --- /dev/null +++ b/arch/sh/boards/mach-lboxre2/setup.c @@ -0,0 +1,84 @@ +/* + * linux/arch/sh/boards/lbox/setup.c + * + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * NTT COMWARE L-BOX RE2 Support + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +static struct resource cf_ide_resources[] = { + [0] = { + .start = 0x1f0, + .end = 0x1f0 + 8 , + .flags = IORESOURCE_IO, + }, + [1] = { + .start = 0x1f0 + 0x206, + .end = 0x1f0 +8 + 0x206 + 8, + .flags = IORESOURCE_IO, + }, + [2] = { + .start = IRQ_CF0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, +}; + +static struct platform_device *lboxre2_devices[] __initdata = { + &cf_ide_device, +}; + +static int __init lboxre2_devices_setup(void) +{ + u32 cf0_io_base; /* Boot CF base address */ + pgprot_t prot; + unsigned long paddrbase, psize; + + /* open I/O area window */ + paddrbase = virt_to_phys((void*)PA_AREA5_IO); + psize = PAGE_SIZE; + prot = PAGE_KERNEL_PCC( 1 , _PAGE_PCC_IO16); + cf0_io_base = (u32)p3_ioremap(paddrbase, psize, prot.pgprot); + if (!cf0_io_base) { + printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ ); + return -ENOMEM; + } + + cf_ide_resources[0].start += cf0_io_base ; + cf_ide_resources[0].end += cf0_io_base ; + cf_ide_resources[1].start += cf0_io_base ; + cf_ide_resources[1].end += cf0_io_base ; + + return platform_add_devices(lboxre2_devices, + ARRAY_SIZE(lboxre2_devices)); + +} +device_initcall(lboxre2_devices_setup); + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_lboxre2 __initmv = { + .mv_name = "L-BOX RE2", + .mv_nr_irqs = 72, + .mv_init_irq = init_lboxre2_IRQ, +}; diff --git a/arch/sh/boards/mach-magicpanelr2/Kconfig b/arch/sh/boards/mach-magicpanelr2/Kconfig new file mode 100644 index 000000000000..b0abddc3e84f --- /dev/null +++ b/arch/sh/boards/mach-magicpanelr2/Kconfig @@ -0,0 +1,13 @@ +if SH_MAGIC_PANEL_R2 + +menu "Magic Panel R2 options" + +config SH_MAGIC_PANEL_R2_VERSION + int SH_MAGIC_PANEL_R2_VERSION + default "3" + help + Set the version of the Magic Panel R2 + +endmenu + +endif diff --git a/arch/sh/boards/mach-magicpanelr2/Makefile b/arch/sh/boards/mach-magicpanelr2/Makefile new file mode 100644 index 000000000000..7a6d586b9072 --- /dev/null +++ b/arch/sh/boards/mach-magicpanelr2/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Magic Panel specific parts +# + +obj-y := setup.o \ No newline at end of file diff --git a/arch/sh/boards/mach-magicpanelr2/setup.c b/arch/sh/boards/mach-magicpanelr2/setup.c new file mode 100644 index 000000000000..f3b8b07ea5d6 --- /dev/null +++ b/arch/sh/boards/mach-magicpanelr2/setup.c @@ -0,0 +1,394 @@ +/* + * linux/arch/sh/boards/magicpanel/setup.c + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * Magic Panel Release 2 board setup + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL) + +/* Prefer cmdline over RedBoot */ +static const char *probes[] = { "cmdlinepart", "RedBoot", NULL }; + +/* Wait until reset finished. Timeout is 100ms. */ +static int __init ethernet_reset_finished(void) +{ + int i; + + if (LAN9115_READY) + return 1; + + for (i = 0; i < 10; ++i) { + mdelay(10); + if (LAN9115_READY) + return 1; + } + + return 0; +} + +static void __init reset_ethernet(void) +{ + /* PMDR: LAN_RESET=on */ + CLRBITS_OUTB(0x10, PORT_PMDR); + + udelay(200); + + /* PMDR: LAN_RESET=off */ + SETBITS_OUTB(0x10, PORT_PMDR); +} + +static void __init setup_chip_select(void) +{ + /* CS2: LAN (0x08000000 - 0x0bffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x36db0400, CS2BCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x000003c0, CS2WCR); + + /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS4BCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x00100981, CS4WCR); + + /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS5ABCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x00100981, CS5AWCR); + + /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS5BBCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x00100981, CS5BWCR); + + /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS6ABCR); + /* (SW:1.5 WR:3 HW:1.5), no ext. wait */ + ctrl_outl(0x001009C1, CS6AWCR); +} + +static void __init setup_port_multiplexing(void) +{ + /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5); + * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1); + */ + ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */ + + /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1); + * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0); + */ + ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */ + + /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4); + * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; + */ + ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */ + + /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4); + * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0); + */ + ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */ + + /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP; + * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM; + */ + ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */ + + /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3; + * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc); + */ + ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */ + + /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2); + * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9); + */ + ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */ + + /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE); + * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR; + */ + ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */ + + /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3; + * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC; + */ + ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */ + + /* K7 (x); K6 (x); K5 (x); K4 (x); + * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY) + */ + ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */ + + /* L7 TRST; L6 TMS; L5 TDO; L4 TDI; + * L3 TCK; L2 (x); L1 (x); L0 (x); + */ + ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */ + + /* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED); + * M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL); + * M1 CS5B(CAN3_CS); M0 GPI+(nc); + */ + ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */ + + /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit, + * LAN_RESET=off, BUZZER=off, LCD_BL=off + */ +#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2 + ctrl_outb(0x30, PORT_PMDR); +#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3 + ctrl_outb(0xF0, PORT_PMDR); +#else +#error Unknown revision of PLATFORM_MP_R2 +#endif + + /* P7 (x); P6 (x); P5 (x); + * P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ); + * P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ) + */ + ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */ + ctrl_outb(0x10, PORT_PPDR); + + /* R7 A25; R6 A24; R5 A23; R4 A22; + * R3 A21; R2 A20; R1 A19; R0 A0; + */ + ctrl_outw(0x0000, PORT_PRCR); /* 00 00 00 00 00 00 00 00 */ + + /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2); + * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK; + */ + ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */ + + /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS; + * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG) + */ + ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */ + + /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT); + * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK; + */ + ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */ + + /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2); + * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT); + */ + ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */ +} + +static void __init mpr2_setup(char **cmdline_p) +{ + __set_io_port_base(0xa0000000); + + /* set Pin Select Register A: + * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2, + * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND + */ + ctrl_outw(0xAABC, PORT_PSELA); + /* set Pin Select Register B: + * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC, + * LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved + */ + ctrl_outw(0x3C00, PORT_PSELB); + /* set Pin Select Register C: + * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved + */ + ctrl_outw(0x0000, PORT_PSELC); + /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK, + * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved + */ + ctrl_outw(0x0000, PORT_PSELD); + /* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */ + ctrl_outw(0x0101, PORT_UTRCTL); + /* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */ + ctrl_outw(0xA5C0, PORT_UCLKCR_W); + + setup_chip_select(); + + setup_port_multiplexing(); + + reset_ethernet(); + + printk(KERN_INFO "Magic Panel Release 2 A.%i\n", + CONFIG_SH_MAGIC_PANEL_R2_VERSION); + + if (ethernet_reset_finished() == 0) + printk(KERN_WARNING "Ethernet not ready\n"); +} + +static struct resource smc911x_resources[] = { + [0] = { + .start = 0xa8000000, + .end = 0xabffffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 35, + .end = 35, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc911x_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc911x_resources), + .resource = smc911x_resources, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM, + }, +}; + +static struct heartbeat_data heartbeat_data = { + .flags = HEARTBEAT_INVERTED, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct mtd_partition *parsed_partitions; + +static struct mtd_partition mpr2_partitions[] = { + /* Reserved for bootloader, read-only */ + { + .name = "Bootloader", + .offset = 0x00000000UL, + .size = MPR2_MTD_BOOTLOADER_SIZE, + .mask_flags = MTD_WRITEABLE, + }, + /* Reserved for kernel image */ + { + .name = "Kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = MPR2_MTD_KERNEL_SIZE, + }, + /* Rest is used for Flash FS */ + { + .name = "Flash_FS", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data flash_data = { + .width = 2, +}; + +static struct resource flash_resource = { + .start = 0x00000000, + .end = 0x2000000UL, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = -1, + .resource = &flash_resource, + .num_resources = 1, + .dev = { + .platform_data = &flash_data, + }, +}; + +static struct mtd_info *flash_mtd; + +static struct map_info mpr2_flash_map = { + .name = "Magic Panel R2 Flash", + .size = 0x2000000UL, + .bankwidth = 2, +}; + +static void __init set_mtd_partitions(void) +{ + int nr_parts = 0; + + simple_map_init(&mpr2_flash_map); + flash_mtd = do_map_probe("cfi_probe", &mpr2_flash_map); + nr_parts = parse_mtd_partitions(flash_mtd, probes, + &parsed_partitions, 0); + /* If there is no partition table, used the hard coded table */ + if (nr_parts <= 0) { + flash_data.parts = mpr2_partitions; + flash_data.nr_parts = ARRAY_SIZE(mpr2_partitions); + } else { + flash_data.nr_parts = nr_parts; + flash_data.parts = parsed_partitions; + } +} + +/* + * Add all resources to the platform_device + */ + +static struct platform_device *mpr2_devices[] __initdata = { + &heartbeat_device, + &smc911x_device, + &flash_device, +}; + + +static int __init mpr2_devices_setup(void) +{ + set_mtd_partitions(); + return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices)); +} +device_initcall(mpr2_devices_setup); + +/* + * Initialize IRQ setting + */ +static void __init init_mpr2_IRQ(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */ + + set_irq_type(32, IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */ + set_irq_type(33, IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */ + set_irq_type(34, IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */ + set_irq_type(35, IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */ + set_irq_type(36, IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */ + set_irq_type(37, IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */ + + intc_set_priority(32, 13); /* IRQ0 CAN1 */ + intc_set_priority(33, 13); /* IRQ0 CAN2 */ + intc_set_priority(34, 13); /* IRQ0 CAN3 */ + intc_set_priority(35, 6); /* IRQ3 SMSC9115 */ +} + +/* + * The Machine Vector + */ + +static struct sh_machine_vector mv_mpr2 __initmv = { + .mv_name = "mpr2", + .mv_setup = mpr2_setup, + .mv_init_irq = init_mpr2_IRQ, +}; diff --git a/arch/sh/boards/mach-microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile new file mode 100644 index 000000000000..1387dd6c85eb --- /dev/null +++ b/arch/sh/boards/mach-microdev/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the SuperH MicroDev specific parts of the kernel +# + +obj-y := setup.o irq.o io.o + +obj-$(CONFIG_HEARTBEAT) += led.o + diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c new file mode 100644 index 000000000000..9f8a540f7e14 --- /dev/null +++ b/arch/sh/boards/mach-microdev/io.c @@ -0,0 +1,367 @@ +/* + * linux/arch/sh/boards/superh/microdev/io.c + * + * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) + * Copyright (C) 2003, 2004 SuperH, Inc. + * Copyright (C) 2004 Paul Mundt + * + * SuperH SH4-202 MicroDev board support. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ + +#include +#include +#include +#include +#include + + /* + * we need to have a 'safe' address to re-direct all I/O requests + * that we do not explicitly wish to handle. This safe address + * must have the following properies: + * + * * writes are ignored (no exception) + * * reads are benign (no side-effects) + * * accesses of width 1, 2 and 4-bytes are all valid. + * + * The Processor Version Register (PVR) has these properties. + */ +#define PVR 0xff000030 /* Processor Version Register */ + + +#define IO_IDE2_BASE 0x170ul /* I/O base for SMSC FDC37C93xAPM IDE #2 */ +#define IO_IDE1_BASE 0x1f0ul /* I/O base for SMSC FDC37C93xAPM IDE #1 */ +#define IO_ISP1161_BASE 0x290ul /* I/O port for Philips ISP1161x USB chip */ +#define IO_SERIAL2_BASE 0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */ +#define IO_LAN91C111_BASE 0x300ul /* I/O base for SMSC LAN91C111 Ethernet chip */ +#define IO_IDE2_MISC 0x376ul /* I/O misc for SMSC FDC37C93xAPM IDE #2 */ +#define IO_SUPERIO_BASE 0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */ +#define IO_IDE1_MISC 0x3f6ul /* I/O misc for SMSC FDC37C93xAPM IDE #1 */ +#define IO_SERIAL1_BASE 0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */ + +#define IO_ISP1161_EXTENT 0x04ul /* I/O extent for Philips ISP1161x USB chip */ +#define IO_LAN91C111_EXTENT 0x10ul /* I/O extent for SMSC LAN91C111 Ethernet chip */ +#define IO_SUPERIO_EXTENT 0x02ul /* I/O extent for SMSC FDC37C93xAPM SuperIO chip */ +#define IO_IDE_EXTENT 0x08ul /* I/O extent for IDE Task Register set */ +#define IO_SERIAL_EXTENT 0x10ul + +#define IO_LAN91C111_PHYS 0xa7500000ul /* Physical address of SMSC LAN91C111 Ethernet chip */ +#define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */ +#define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */ + +/* + * map I/O ports to memory-mapped addresses + */ +static unsigned long microdev_isa_port2addr(unsigned long offset) +{ + unsigned long result; + + if ((offset >= IO_LAN91C111_BASE) && + (offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) { + /* + * SMSC LAN91C111 Ethernet chip + */ + result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE; + } else if ((offset >= IO_SUPERIO_BASE) && + (offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * Configuration Registers + */ + result = IO_SUPERIO_PHYS + (offset << 1); +#if 0 + } else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG || + offset == KBD_STATUS_REG) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * PS/2 Keyboard + Mouse (ports 0x60 and 0x64). + */ + result = IO_SUPERIO_PHYS + (offset << 1); +#endif + } else if (((offset >= IO_IDE1_BASE) && + (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) || + (offset == IO_IDE1_MISC)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * IDE #1 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if (((offset >= IO_IDE2_BASE) && + (offset < IO_IDE2_BASE + IO_IDE_EXTENT)) || + (offset == IO_IDE2_MISC)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * IDE #2 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if ((offset >= IO_SERIAL1_BASE) && + (offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * Serial #1 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if ((offset >= IO_SERIAL2_BASE) && + (offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * Serial #2 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if ((offset >= IO_ISP1161_BASE) && + (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) { + /* + * Philips USB ISP1161x chip + */ + result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE; + } else { + /* + * safe default. + */ + printk("Warning: unexpected port in %s( offset = 0x%lx )\n", + __func__, offset); + result = PVR; + } + + return result; +} + +#define PORT2ADDR(x) (microdev_isa_port2addr(x)) + +static inline void delay(void) +{ +#if defined(CONFIG_PCI) + /* System board present, just make a dummy SRAM access. (CS0 will be + mapped to PCI memory, probably good to avoid it.) */ + ctrl_inw(0xa6800000); +#else + /* CS0 will be mapped to flash, ROM etc so safe to access it. */ + ctrl_inw(0xa0000000); +#endif +} + +unsigned char microdev_inb(unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) + return microdev_pci_inb(port); +#endif + return *(volatile unsigned char*)PORT2ADDR(port); +} + +unsigned short microdev_inw(unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) + return microdev_pci_inw(port); +#endif + return *(volatile unsigned short*)PORT2ADDR(port); +} + +unsigned int microdev_inl(unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) + return microdev_pci_inl(port); +#endif + return *(volatile unsigned int*)PORT2ADDR(port); +} + +void microdev_outw(unsigned short b, unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) { + microdev_pci_outw(b, port); + return; + } +#endif + *(volatile unsigned short*)PORT2ADDR(port) = b; +} + +void microdev_outb(unsigned char b, unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) { + microdev_pci_outb(b, port); + return; + } +#endif + + /* + * There is a board feature with the current SH4-202 MicroDev in + * that the 2 byte enables (nBE0 and nBE1) are tied together (and + * to the Chip Select Line (Ethernet_CS)). Due to this connectivity, + * it is not possible to safely perform 8-bit writes to the + * Ethernet registers, as 16-bits will be consumed from the Data + * lines (corrupting the other byte). Hence, this function is + * written to implement 16-bit read/modify/write for all byte-wide + * accesses. + * + * Note: there is no problem with byte READS (even or odd). + * + * Sean McGoogan - 16th June 2003. + */ + if ((port >= IO_LAN91C111_BASE) && + (port < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) { + /* + * Then are trying to perform a byte-write to the + * LAN91C111. This needs special care. + */ + if (port % 2 == 1) { /* is the port odd ? */ + /* unset bit-0, i.e. make even */ + const unsigned long evenPort = port-1; + unsigned short word; + + /* + * do a 16-bit read/write to write to 'port', + * preserving even byte. + * + * Even addresses are bits 0-7 + * Odd addresses are bits 8-15 + */ + word = microdev_inw(evenPort); + word = (word & 0xffu) | (b << 8); + microdev_outw(word, evenPort); + } else { + /* else, we are trying to do an even byte write */ + unsigned short word; + + /* + * do a 16-bit read/write to write to 'port', + * preserving odd byte. + * + * Even addresses are bits 0-7 + * Odd addresses are bits 8-15 + */ + word = microdev_inw(port); + word = (word & 0xff00u) | (b); + microdev_outw(word, port); + } + } else { + *(volatile unsigned char*)PORT2ADDR(port) = b; + } +} + +void microdev_outl(unsigned int b, unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) { + microdev_pci_outl(b, port); + return; + } +#endif + *(volatile unsigned int*)PORT2ADDR(port) = b; +} + +unsigned char microdev_inb_p(unsigned long port) +{ + unsigned char v = microdev_inb(port); + delay(); + return v; +} + +unsigned short microdev_inw_p(unsigned long port) +{ + unsigned short v = microdev_inw(port); + delay(); + return v; +} + +unsigned int microdev_inl_p(unsigned long port) +{ + unsigned int v = microdev_inl(port); + delay(); + return v; +} + +void microdev_outb_p(unsigned char b, unsigned long port) +{ + microdev_outb(b, port); + delay(); +} + +void microdev_outw_p(unsigned short b, unsigned long port) +{ + microdev_outw(b, port); + delay(); +} + +void microdev_outl_p(unsigned int b, unsigned long port) +{ + microdev_outl(b, port); + delay(); +} + +void microdev_insb(unsigned long port, void *buffer, unsigned long count) +{ + volatile unsigned char *port_addr; + unsigned char *buf = buffer; + + port_addr = (volatile unsigned char *)PORT2ADDR(port); + + while (count--) + *buf++ = *port_addr; +} + +void microdev_insw(unsigned long port, void *buffer, unsigned long count) +{ + volatile unsigned short *port_addr; + unsigned short *buf = buffer; + + port_addr = (volatile unsigned short *)PORT2ADDR(port); + + while (count--) + *buf++ = *port_addr; +} + +void microdev_insl(unsigned long port, void *buffer, unsigned long count) +{ + volatile unsigned long *port_addr; + unsigned int *buf = buffer; + + port_addr = (volatile unsigned long *)PORT2ADDR(port); + + while (count--) + *buf++ = *port_addr; +} + +void microdev_outsb(unsigned long port, const void *buffer, unsigned long count) +{ + volatile unsigned char *port_addr; + const unsigned char *buf = buffer; + + port_addr = (volatile unsigned char *)PORT2ADDR(port); + + while (count--) + *port_addr = *buf++; +} + +void microdev_outsw(unsigned long port, const void *buffer, unsigned long count) +{ + volatile unsigned short *port_addr; + const unsigned short *buf = buffer; + + port_addr = (volatile unsigned short *)PORT2ADDR(port); + + while (count--) + *port_addr = *buf++; +} + +void microdev_outsl(unsigned long port, const void *buffer, unsigned long count) +{ + volatile unsigned long *port_addr; + const unsigned int *buf = buffer; + + port_addr = (volatile unsigned long *)PORT2ADDR(port); + + while (count--) + *port_addr = *buf++; +} diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c new file mode 100644 index 000000000000..4d335077a3ff --- /dev/null +++ b/arch/sh/boards/mach-microdev/irq.c @@ -0,0 +1,183 @@ +/* + * arch/sh/boards/superh/microdev/irq.c + * + * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) + * + * SuperH SH4-202 MicroDev board support. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ + +#include +#include +#include +#include +#include +#include + +#define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */ + +static const struct { + unsigned char fpgaIrq; + unsigned char mapped; + const char *name; +} fpgaIrqTable[NUM_EXTERNAL_IRQS] = { + { 0, 0, "unused" }, /* IRQ #0 IRL=15 0x200 */ + { MICRODEV_FPGA_IRQ_KEYBOARD, 1, "keyboard" }, /* IRQ #1 IRL=14 0x220 */ + { MICRODEV_FPGA_IRQ_SERIAL1, 1, "Serial #1"}, /* IRQ #2 IRL=13 0x240 */ + { MICRODEV_FPGA_IRQ_ETHERNET, 1, "Ethernet" }, /* IRQ #3 IRL=12 0x260 */ + { MICRODEV_FPGA_IRQ_SERIAL2, 0, "Serial #2"}, /* IRQ #4 IRL=11 0x280 */ + { 0, 0, "unused" }, /* IRQ #5 IRL=10 0x2a0 */ + { 0, 0, "unused" }, /* IRQ #6 IRL=9 0x2c0 */ + { MICRODEV_FPGA_IRQ_USB_HC, 1, "USB" }, /* IRQ #7 IRL=8 0x2e0 */ + { MICRODEV_IRQ_PCI_INTA, 1, "PCI INTA" }, /* IRQ #8 IRL=7 0x300 */ + { MICRODEV_IRQ_PCI_INTB, 1, "PCI INTB" }, /* IRQ #9 IRL=6 0x320 */ + { MICRODEV_IRQ_PCI_INTC, 1, "PCI INTC" }, /* IRQ #10 IRL=5 0x340 */ + { MICRODEV_IRQ_PCI_INTD, 1, "PCI INTD" }, /* IRQ #11 IRL=4 0x360 */ + { MICRODEV_FPGA_IRQ_MOUSE, 1, "mouse" }, /* IRQ #12 IRL=3 0x380 */ + { MICRODEV_FPGA_IRQ_IDE2, 1, "IDE #2" }, /* IRQ #13 IRL=2 0x3a0 */ + { MICRODEV_FPGA_IRQ_IDE1, 1, "IDE #1" }, /* IRQ #14 IRL=1 0x3c0 */ + { 0, 0, "unused" }, /* IRQ #15 IRL=0 0x3e0 */ +}; + +#if (MICRODEV_LINUX_IRQ_KEYBOARD != 1) +# error Inconsistancy in defining the IRQ# for Keyboard! +#endif + +#if (MICRODEV_LINUX_IRQ_ETHERNET != 3) +# error Inconsistancy in defining the IRQ# for Ethernet! +#endif + +#if (MICRODEV_LINUX_IRQ_USB_HC != 7) +# error Inconsistancy in defining the IRQ# for USB! +#endif + +#if (MICRODEV_LINUX_IRQ_MOUSE != 12) +# error Inconsistancy in defining the IRQ# for PS/2 Mouse! +#endif + +#if (MICRODEV_LINUX_IRQ_IDE2 != 13) +# error Inconsistancy in defining the IRQ# for secondary IDE! +#endif + +#if (MICRODEV_LINUX_IRQ_IDE1 != 14) +# error Inconsistancy in defining the IRQ# for primary IDE! +#endif + +static void enable_microdev_irq(unsigned int irq); +static void disable_microdev_irq(unsigned int irq); + + /* shutdown is same as "disable" */ +#define shutdown_microdev_irq disable_microdev_irq + +static void mask_and_ack_microdev(unsigned int); +static void end_microdev_irq(unsigned int irq); + +static unsigned int startup_microdev_irq(unsigned int irq) +{ + enable_microdev_irq(irq); + return 0; /* never anything pending */ +} + +static struct hw_interrupt_type microdev_irq_type = { + .typename = "MicroDev-IRQ", + .startup = startup_microdev_irq, + .shutdown = shutdown_microdev_irq, + .enable = enable_microdev_irq, + .disable = disable_microdev_irq, + .ack = mask_and_ack_microdev, + .end = end_microdev_irq +}; + +static void disable_microdev_irq(unsigned int irq) +{ + unsigned int fpgaIrq; + + if (irq >= NUM_EXTERNAL_IRQS) + return; + if (!fpgaIrqTable[irq].mapped) + return; + + fpgaIrq = fpgaIrqTable[irq].fpgaIrq; + + /* disable interrupts on the FPGA INTC register */ + ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG); +} + +static void enable_microdev_irq(unsigned int irq) +{ + unsigned long priorityReg, priorities, pri; + unsigned int fpgaIrq; + + if (unlikely(irq >= NUM_EXTERNAL_IRQS)) + return; + if (unlikely(!fpgaIrqTable[irq].mapped)) + return; + + pri = 15 - irq; + + fpgaIrq = fpgaIrqTable[irq].fpgaIrq; + priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq); + + /* set priority for the interrupt */ + priorities = ctrl_inl(priorityReg); + priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq); + priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri); + ctrl_outl(priorities, priorityReg); + + /* enable interrupts on the FPGA INTC register */ + ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG); +} + + /* This functions sets the desired irq handler to be a MicroDev type */ +static void __init make_microdev_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].chip = µdev_irq_type; + disable_microdev_irq(irq); +} + +static void mask_and_ack_microdev(unsigned int irq) +{ + disable_microdev_irq(irq); +} + +static void end_microdev_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_microdev_irq(irq); +} + +extern void __init init_microdev_irq(void) +{ + int i; + + /* disable interrupts on the FPGA INTC register */ + ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG); + + for (i = 0; i < NUM_EXTERNAL_IRQS; i++) + make_microdev_irq(i); +} + +extern void microdev_print_fpga_intc_status(void) +{ + volatile unsigned int * const intenb = (unsigned int*)MICRODEV_FPGA_INTENB_REG; + volatile unsigned int * const intdsb = (unsigned int*)MICRODEV_FPGA_INTDSB_REG; + volatile unsigned int * const intpria = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(0); + volatile unsigned int * const intprib = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(8); + volatile unsigned int * const intpric = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(16); + volatile unsigned int * const intprid = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(24); + volatile unsigned int * const intsrc = (unsigned int*)MICRODEV_FPGA_INTSRC_REG; + volatile unsigned int * const intreq = (unsigned int*)MICRODEV_FPGA_INTREQ_REG; + + printk("-------------------------- microdev_print_fpga_intc_status() ------------------\n"); + printk("FPGA_INTENB = 0x%08x\n", *intenb); + printk("FPGA_INTDSB = 0x%08x\n", *intdsb); + printk("FPGA_INTSRC = 0x%08x\n", *intsrc); + printk("FPGA_INTREQ = 0x%08x\n", *intreq); + printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria); + printk("-------------------------------------------------------------------------------\n"); +} + + diff --git a/arch/sh/boards/mach-microdev/led.c b/arch/sh/boards/mach-microdev/led.c new file mode 100644 index 000000000000..36e54b47a752 --- /dev/null +++ b/arch/sh/boards/mach-microdev/led.c @@ -0,0 +1,101 @@ +/* + * linux/arch/sh/boards/superh/microdev/led.c + * + * Copyright (C) 2002 Stuart Menefy + * Copyright (C) 2003 Richard Curnow (Richard.Curnow@superh.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + */ + +#include + +#define LED_REGISTER 0xa6104d20 + +static void mach_led_d9(int value) +{ + unsigned long reg; + reg = ctrl_inl(LED_REGISTER); + reg &= ~1; + reg |= (value & 1); + ctrl_outl(reg, LED_REGISTER); + return; +} + +static void mach_led_d10(int value) +{ + unsigned long reg; + reg = ctrl_inl(LED_REGISTER); + reg &= ~2; + reg |= ((value & 1) << 1); + ctrl_outl(reg, LED_REGISTER); + return; +} + + +#ifdef CONFIG_HEARTBEAT +#include + +static unsigned char banner_table[] = { + 0x11, 0x01, 0x11, 0x01, 0x11, 0x03, + 0x11, 0x01, 0x11, 0x01, 0x13, 0x03, + 0x11, 0x01, 0x13, 0x01, 0x13, 0x01, 0x11, 0x03, + 0x11, 0x03, + 0x11, 0x01, 0x13, 0x01, 0x11, 0x03, + 0x11, 0x01, 0x11, 0x01, 0x11, 0x01, 0x11, 0x07, + 0x13, 0x01, 0x13, 0x03, + 0x11, 0x01, 0x11, 0x03, + 0x13, 0x01, 0x11, 0x01, 0x13, 0x01, 0x11, 0x03, + 0x11, 0x01, 0x13, 0x01, 0x11, 0x03, + 0x13, 0x01, 0x13, 0x01, 0x13, 0x03, + 0x13, 0x01, 0x11, 0x01, 0x11, 0x03, + 0x11, 0x03, + 0x11, 0x01, 0x11, 0x01, 0x11, 0x01, 0x13, 0x07, + 0xff +}; + +static void banner(void) +{ + static int pos = 0; + static int count = 0; + + if (count) { + count--; + } else { + int val = banner_table[pos]; + if (val == 0xff) { + pos = 0; + val = banner_table[pos]; + } + pos++; + mach_led_d10((val >> 4) & 1); + count = 10 * (val & 0xf); + } +} + +/* From heartbeat_harp in the stboards directory */ +/* acts like an actual heart beat -- ie thump-thump-pause... */ +void microdev_heartbeat(void) +{ + static unsigned cnt = 0, period = 0, dist = 0; + + if (cnt == 0 || cnt == dist) + mach_led_d9(1); + else if (cnt == 7 || cnt == dist+7) + mach_led_d9(0); + + if (++cnt > period) { + cnt = 0; + /* The hyperbolic function below modifies the heartbeat period + * length in dependency of the current (5min) load. It goes + * through the points f(0)=126, f(1)=86, f(5)=51, + * f(inf)->30. */ + period = ((672< +#include +#include +#include + It is advised, but not required that you turn on the + CONFIG_FRAME_POINTER kernel option. This option inserts code to + into the compiled executable which saves the frame information in + registers or on the stack at different points which will allow a + debugger such as gdb to more accurately construct stack back traces + while debugging the kernel. + + Next you should choose one of more I/O drivers to interconnect debugging host and debugged target. Early boot debugging requires a KGDB I/O driver that supports early debugging and the driver must be diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb index 2cfd2721f7ed..9b5d1d7f2ef7 100644 --- a/lib/Kconfig.kgdb +++ b/lib/Kconfig.kgdb @@ -4,14 +4,17 @@ config HAVE_ARCH_KGDB menuconfig KGDB bool "KGDB: kernel debugging with remote gdb" - select FRAME_POINTER depends on HAVE_ARCH_KGDB depends on DEBUG_KERNEL && EXPERIMENTAL help If you say Y here, it will be possible to remotely debug the - kernel using gdb. Documentation of kernel debugger is available - at http://kgdb.sourceforge.net as well as in DocBook form - in Documentation/DocBook/. If unsure, say N. + kernel using gdb. It is recommended but not required, that + you also turn on the kernel config option + CONFIG_FRAME_POINTER to aid in producing more reliable stack + backtraces in the external debugger. Documentation of + kernel debugger is available at http://kgdb.sourceforge.net + as well as in DocBook form in Documentation/DocBook/. If + unsure, say N. if KGDB -- cgit v1.2.3 From a9b60bf4c29e07a5a2f26a6f74937972fee9b58b Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 1 Aug 2008 08:39:34 -0500 Subject: kgdb: fix kgdb_validate_break_address to perform a mem write A regression to the kgdb core was found in the case of using the CONFIG_DEBUG_RODATA kernel option. When this option is on, a breakpoint cannot be written into any readonly memory page. When an external debugger requests a breakpoint to get set, the kgdb_validate_break_address() was only checking to see if the address to place the breakpoint was readable and lacked a write check. This patch changes the validate routine to try reading (via the breakpoint set request) and also to try immediately writing the break point. If either fails, an error is correctly returned and the debugger behaves correctly. Then an end user can make the descision to use hardware breakpoints. Also update the documentation to reflect that using CONFIG_DEBUG_RODATA will inhibit the use of software breakpoints. Signed-off-by: Jason Wessel --- Documentation/DocBook/kgdb.tmpl | 10 ++++++++++ kernel/kgdb.c | 26 +++++++++++++++++++------- 2 files changed, 29 insertions(+), 7 deletions(-) diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl index 54d3b158d080..372dec20c8da 100644 --- a/Documentation/DocBook/kgdb.tmpl +++ b/Documentation/DocBook/kgdb.tmpl @@ -106,6 +106,16 @@ while debugging the kernel. + If the architecture that you are using supports the kernel option + CONFIG_DEBUG_RODATA, you should consider turning it off. This + option will prevent the use of software breakpoints because it + marks certain regions of the kernel's memory space as read-only. + If kgdb supports it for the architecture you are using, you can + use hardware breakpoints if you desire to run with the + CONFIG_DEBUG_RODATA option turned on, else you need to turn off + this option. + + Next you should choose one of more I/O drivers to interconnect debugging host and debugged target. Early boot debugging requires a KGDB I/O driver that supports early debugging and the driver must be diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 3ec23c3ec97f..c0d45b2c4d79 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -166,13 +166,6 @@ early_param("nokgdbroundup", opt_nokgdbroundup); * Weak aliases for breakpoint management, * can be overriden by architectures when needed: */ -int __weak kgdb_validate_break_address(unsigned long addr) -{ - char tmp_variable[BREAK_INSTR_SIZE]; - - return probe_kernel_read(tmp_variable, (char *)addr, BREAK_INSTR_SIZE); -} - int __weak kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) { int err; @@ -191,6 +184,25 @@ int __weak kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle) (char *)bundle, BREAK_INSTR_SIZE); } +int __weak kgdb_validate_break_address(unsigned long addr) +{ + char tmp_variable[BREAK_INSTR_SIZE]; + int err; + /* Validate setting the breakpoint and then removing it. In the + * remove fails, the kernel needs to emit a bad message because we + * are deep trouble not being able to put things back the way we + * found them. + */ + err = kgdb_arch_set_breakpoint(addr, tmp_variable); + if (err) + return err; + err = kgdb_arch_remove_breakpoint(addr, tmp_variable); + if (err) + printk(KERN_ERR "KGDB: Critical breakpoint error, kernel " + "memory destroyed at: %lx", addr); + return err; +} + unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs) { return instruction_pointer(regs); -- cgit v1.2.3 From 25fc999913839a45cbb48ac7872e67f7521e7ed9 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 1 Aug 2008 08:39:35 -0500 Subject: kgdb: fix gdb serial thread queries The command "info threads" did not work correctly with kgdb. It would result in a silent kernel hang if used. This patach addresses several problems. - Fix use of deprecated NR_CPUS - Fix kgdb to not walk linearly through the pid space - Correctly implement shadow pids - Change the threads per query to a #define - Fix kgdb_hex2long to work with negated values The threads 0 and -1 are reserved to represent the current task. That means that CPU 0 will start with a shadow thread id of -2, and CPU 1 will have a shadow thread id of -3, etc... From the debugger you can switch to a shadow thread to see what one of the other cpus was doing, however it is not possible to execute run control operations on any other cpu execept the cpu executing the kgdb_handle_exception(). Signed-off-by: Jason Wessel --- kernel/kgdb.c | 68 +++++++++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 50 insertions(+), 18 deletions(-) diff --git a/kernel/kgdb.c b/kernel/kgdb.c index c0d45b2c4d79..eaa21fc9ad1d 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -56,12 +56,14 @@ static int kgdb_break_asap; +#define KGDB_MAX_THREAD_QUERY 17 struct kgdb_state { int ex_vector; int signo; int err_code; int cpu; int pass_exception; + unsigned long thr_query; unsigned long threadid; long kgdb_usethreadid; struct pt_regs *linux_regs; @@ -445,9 +447,14 @@ int kgdb_hex2long(char **ptr, unsigned long *long_val) { int hex_val; int num = 0; + int negate = 0; *long_val = 0; + if (**ptr == '-') { + negate = 1; + (*ptr)++; + } while (**ptr) { hex_val = hex(**ptr); if (hex_val < 0) @@ -458,6 +465,9 @@ int kgdb_hex2long(char **ptr, unsigned long *long_val) (*ptr)++; } + if (negate) + *long_val = -*long_val; + return num; } @@ -527,10 +537,16 @@ static void int_to_threadref(unsigned char *id, int value) static struct task_struct *getthread(struct pt_regs *regs, int tid) { /* - * Non-positive TIDs are remapped idle tasks: + * Non-positive TIDs are remapped to the cpu shadow information */ - if (tid <= 0) - return idle_task(-tid); + if (tid == 0 || tid == -1) + tid = -atomic_read(&kgdb_active) - 2; + if (tid < 0) { + if (kgdb_info[-tid - 2].task) + return kgdb_info[-tid - 2].task; + else + return idle_task(-tid - 2); + } /* * find_task_by_pid_ns() does not take the tasklist lock anymore @@ -737,14 +753,15 @@ setundefined: } /* - * Remap normal tasks to their real PID, idle tasks to -1 ... -NR_CPUs: + * Remap normal tasks to their real PID, + * CPU shadow threads are mapped to -CPU - 2 */ static inline int shadow_pid(int realpid) { if (realpid) return realpid; - return -1-raw_smp_processor_id(); + return -raw_smp_processor_id() - 2; } static char gdbmsgbuf[BUFMAX + 1]; @@ -838,7 +855,7 @@ static void gdb_cmd_getregs(struct kgdb_state *ks) local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo; } else { local_debuggerinfo = NULL; - for (i = 0; i < NR_CPUS; i++) { + for_each_online_cpu(i) { /* * Try to find the task on some other * or possibly this node if we do not @@ -972,10 +989,13 @@ static int gdb_cmd_reboot(struct kgdb_state *ks) /* Handle the 'q' query packets */ static void gdb_cmd_query(struct kgdb_state *ks) { - struct task_struct *thread; + struct task_struct *g; + struct task_struct *p; unsigned char thref[8]; char *ptr; int i; + int cpu; + int finished = 0; switch (remcom_in_buffer[1]) { case 's': @@ -985,22 +1005,34 @@ static void gdb_cmd_query(struct kgdb_state *ks) break; } - if (remcom_in_buffer[1] == 'f') - ks->threadid = 1; - + i = 0; remcom_out_buffer[0] = 'm'; ptr = remcom_out_buffer + 1; - - for (i = 0; i < 17; ks->threadid++) { - thread = getthread(ks->linux_regs, ks->threadid); - if (thread) { - int_to_threadref(thref, ks->threadid); + if (remcom_in_buffer[1] == 'f') { + /* Each cpu is a shadow thread */ + for_each_online_cpu(cpu) { + ks->thr_query = 0; + int_to_threadref(thref, -cpu - 2); pack_threadid(ptr, thref); ptr += BUF_THREAD_ID_SIZE; *(ptr++) = ','; i++; } } + + do_each_thread(g, p) { + if (i >= ks->thr_query && !finished) { + int_to_threadref(thref, p->pid); + pack_threadid(ptr, thref); + ptr += BUF_THREAD_ID_SIZE; + *(ptr++) = ','; + ks->thr_query++; + if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0) + finished = 1; + } + i++; + } while_each_thread(g, p); + *(--ptr) = '\0'; break; @@ -1023,15 +1055,15 @@ static void gdb_cmd_query(struct kgdb_state *ks) error_packet(remcom_out_buffer, -EINVAL); break; } - if (ks->threadid > 0) { + if ((int)ks->threadid > 0) { kgdb_mem2hex(getthread(ks->linux_regs, ks->threadid)->comm, remcom_out_buffer, 16); } else { static char tmpstr[23 + BUF_THREAD_ID_SIZE]; - sprintf(tmpstr, "Shadow task %d for pid 0", - (int)(-ks->threadid-1)); + sprintf(tmpstr, "shadowCPU%d", + (int)(-ks->threadid - 2)); kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr)); } break; -- cgit v1.2.3 From fc1f397b2c7ef1c9bad58778e4041dfabf20c71c Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 30 Jul 2008 12:34:56 -0700 Subject: [MTD] [NAND] drivers/mtd/nand/nandsim.c needs div64.h drivers/mtd/nand/nandsim.c: In function 'divide': drivers/mtd/nand/nandsim.c:462: error: implicit declaration of function 'do_div' Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/nandsim.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 7428a6c1135e..5d08514f553c 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 963724462a11668185dc67879ea8fe7590973322 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 30 Jul 2008 12:34:57 -0700 Subject: [MTD] [NAND] diskonchip.c fix sparse endian warnings Signed-off-by: Harvey Harrison Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/diskonchip.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index 765d4f0f7c86..e4226e02d63e 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -1125,9 +1125,9 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio goto out; mh = (struct NFTLMediaHeader *)buf; - mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits); - mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN); - mh->FormattedSize = le32_to_cpu(mh->FormattedSize); + le16_to_cpus(&mh->NumEraseUnits); + le16_to_cpus(&mh->FirstPhysicalEUN); + le32_to_cpus(&mh->FormattedSize); printk(KERN_INFO " DataOrgID = %s\n" " NumEraseUnits = %d\n" @@ -1235,12 +1235,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift); mh = (struct INFTLMediaHeader *)buf; - mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks); - mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions); - mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions); - mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits); - mh->FormatFlags = le32_to_cpu(mh->FormatFlags); - mh->PercentUsed = le32_to_cpu(mh->PercentUsed); + le32_to_cpus(&mh->NoOfBootImageBlocks); + le32_to_cpus(&mh->NoOfBinaryPartitions); + le32_to_cpus(&mh->NoOfBDTLPartitions); + le32_to_cpus(&mh->BlockMultiplierBits); + le32_to_cpus(&mh->FormatFlags); + le32_to_cpus(&mh->PercentUsed); printk(KERN_INFO " bootRecordID = %s\n" " NoOfBootImageBlocks = %d\n" @@ -1277,12 +1277,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti /* Scan the partitions */ for (i = 0; (i < 4); i++) { ip = &(mh->Partitions[i]); - ip->virtualUnits = le32_to_cpu(ip->virtualUnits); - ip->firstUnit = le32_to_cpu(ip->firstUnit); - ip->lastUnit = le32_to_cpu(ip->lastUnit); - ip->flags = le32_to_cpu(ip->flags); - ip->spareUnits = le32_to_cpu(ip->spareUnits); - ip->Reserved0 = le32_to_cpu(ip->Reserved0); + le32_to_cpus(&ip->virtualUnits); + le32_to_cpus(&ip->firstUnit); + le32_to_cpus(&ip->lastUnit); + le32_to_cpus(&ip->flags); + le32_to_cpus(&ip->spareUnits); + le32_to_cpus(&ip->Reserved0); printk(KERN_INFO " PARTITION[%d] ->\n" " virtualUnits = %d\n" -- cgit v1.2.3 From c2bb4e5d497823437f0a11d342024ccdc6ff5b0d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:08 +0200 Subject: [S390] Remove last P390 trace. Seems like I forgot this hunk... Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/setup.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h index 4ba14e463e83..2bd9faeb3919 100644 --- a/include/asm-s390/setup.h +++ b/include/asm-s390/setup.h @@ -65,7 +65,6 @@ extern unsigned long machine_flags; #define MACHINE_FLAG_VM (1UL << 0) #define MACHINE_FLAG_IEEE (1UL << 1) -#define MACHINE_FLAG_P390 (1UL << 2) #define MACHINE_FLAG_CSP (1UL << 3) #define MACHINE_FLAG_MVPG (1UL << 4) #define MACHINE_FLAG_DIAG44 (1UL << 5) -- cgit v1.2.3 From 4abb08c24b5fa7b6ad0807c07077f0f216f6788b Mon Sep 17 00:00:00 2001 From: Stefan Weinhuber Date: Fri, 1 Aug 2008 16:39:09 +0200 Subject: [S390] dasd: Add support for enhanced VM UID When z/VM provides two virtual devices (minidisks) that reside on the same real device, both will receive the configuration data from the real device and thus get the same uid. To fix this problem, z/VM provides an additional configuration data record that allows to distinguish between minidisks. z/VM APAR VM64273 needs be installed so this fix has an effect. Signed-off-by: Stefan Weinhuber Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_alias.c | 4 +- drivers/s390/block/dasd_devmap.c | 16 +++- drivers/s390/block/dasd_eckd.c | 147 +++++++++++++++++++++++-------- drivers/s390/block/dasd_eckd.h | 184 +++++++++++++-------------------------- drivers/s390/block/dasd_int.h | 1 + 5 files changed, 189 insertions(+), 163 deletions(-) diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index 2d8df0b30538..20676cdef4a5 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -91,7 +91,8 @@ static struct alias_pav_group *_find_group(struct alias_lcu *lcu, else search_unit_addr = uid->base_unit_addr; list_for_each_entry(pos, &lcu->grouplist, group) { - if (pos->uid.base_unit_addr == search_unit_addr) + if (pos->uid.base_unit_addr == search_unit_addr && + !strncmp(pos->uid.vduit, uid->vduit, sizeof(uid->vduit))) return pos; }; return NULL; @@ -332,6 +333,7 @@ static int _add_device_to_lcu(struct alias_lcu *lcu, group->uid.base_unit_addr = uid->real_unit_addr; else group->uid.base_unit_addr = uid->base_unit_addr; + memcpy(group->uid.vduit, uid->vduit, sizeof(uid->vduit)); INIT_LIST_HEAD(&group->group); INIT_LIST_HEAD(&group->baselist); INIT_LIST_HEAD(&group->aliaslist); diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c index d774e79476fe..cd3335c1c307 100644 --- a/drivers/s390/block/dasd_devmap.c +++ b/drivers/s390/block/dasd_devmap.c @@ -913,7 +913,8 @@ dasd_vendor_show(struct device *dev, struct device_attribute *attr, char *buf) static DEVICE_ATTR(vendor, 0444, dasd_vendor_show, NULL); #define UID_STRLEN ( /* vendor */ 3 + 1 + /* serial */ 14 + 1 +\ - /* SSID */ 4 + 1 + /* unit addr */ 2 + 1) + /* SSID */ 4 + 1 + /* unit addr */ 2 + 1 +\ + /* vduit */ 32 + 1) static ssize_t dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -945,8 +946,17 @@ dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf) sprintf(ua_string, "%02x", uid->real_unit_addr); break; } - snprintf(uid_string, sizeof(uid_string), "%s.%s.%04x.%s", - uid->vendor, uid->serial, uid->ssid, ua_string); + if (strlen(uid->vduit) > 0) + snprintf(uid_string, sizeof(uid_string), + "%s.%s.%04x.%s.%s", + uid->vendor, uid->serial, + uid->ssid, ua_string, + uid->vduit); + else + snprintf(uid_string, sizeof(uid_string), + "%s.%s.%04x.%s", + uid->vendor, uid->serial, + uid->ssid, ua_string); spin_unlock(&dasd_devmap_lock); return snprintf(buf, PAGE_SIZE, "%s\n", uid_string); } diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 3590fdb5b2fd..773b3fe275b2 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -313,8 +313,8 @@ static int prefix(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata, int trk, memset(pfxdata, 0, sizeof(*pfxdata)); /* prefix data */ pfxdata->format = 0; - pfxdata->base_address = basepriv->conf_data.ned1.unit_addr; - pfxdata->base_lss = basepriv->conf_data.ned1.ID; + pfxdata->base_address = basepriv->ned->unit_addr; + pfxdata->base_lss = basepriv->ned->ID; pfxdata->validity.define_extend = 1; /* private uid is kept up to date, conf_data may be outdated */ @@ -536,36 +536,40 @@ dasd_eckd_cdl_reclen(int recid) /* * Generate device unique id that specifies the physical device. */ -static int -dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid) +static int dasd_eckd_generate_uid(struct dasd_device *device, + struct dasd_uid *uid) { struct dasd_eckd_private *private; - struct dasd_eckd_confdata *confdata; + int count; private = (struct dasd_eckd_private *) device->private; if (!private) return -ENODEV; - confdata = &private->conf_data; - if (!confdata) + if (!private->ned || !private->gneq) return -ENODEV; memset(uid, 0, sizeof(struct dasd_uid)); - memcpy(uid->vendor, confdata->ned1.HDA_manufacturer, + memcpy(uid->vendor, private->ned->HDA_manufacturer, sizeof(uid->vendor) - 1); EBCASC(uid->vendor, sizeof(uid->vendor) - 1); - memcpy(uid->serial, confdata->ned1.HDA_location, + memcpy(uid->serial, private->ned->HDA_location, sizeof(uid->serial) - 1); EBCASC(uid->serial, sizeof(uid->serial) - 1); - uid->ssid = confdata->neq.subsystemID; - uid->real_unit_addr = confdata->ned1.unit_addr; - if (confdata->ned2.sneq.flags == 0x40 && - confdata->ned2.sneq.format == 0x0001) { - uid->type = confdata->ned2.sneq.sua_flags; + uid->ssid = private->gneq->subsystemID; + uid->real_unit_addr = private->ned->unit_addr;; + if (private->sneq) { + uid->type = private->sneq->sua_flags; if (uid->type == UA_BASE_PAV_ALIAS) - uid->base_unit_addr = confdata->ned2.sneq.base_unit_addr; + uid->base_unit_addr = private->sneq->base_unit_addr; } else { uid->type = UA_BASE_DEVICE; } + if (private->vdsneq) { + for (count = 0; count < 16; count++) { + sprintf(uid->vduit+2*count, "%02x", + private->vdsneq->uit[count]); + } + } return 0; } @@ -623,6 +627,15 @@ static int dasd_eckd_read_conf_lpm(struct dasd_device *device, ret = -ENOMEM; goto out_error; } + + /* + * buffer has to start with EBCDIC "V1.0" to show + * support for virtual device SNEQ + */ + rcd_buf[0] = 0xE5; + rcd_buf[1] = 0xF1; + rcd_buf[2] = 0x4B; + rcd_buf[3] = 0xF0; cqr = dasd_eckd_build_rcd_lpm(device, rcd_buf, ciw, lpm); if (IS_ERR(cqr)) { ret = PTR_ERR(cqr); @@ -646,8 +659,62 @@ out_error: return ret; } -static int -dasd_eckd_read_conf(struct dasd_device *device) +static int dasd_eckd_identify_conf_parts(struct dasd_eckd_private *private) +{ + + struct dasd_sneq *sneq; + int i, count; + + private->ned = NULL; + private->sneq = NULL; + private->vdsneq = NULL; + private->gneq = NULL; + count = private->conf_len / sizeof(struct dasd_sneq); + sneq = (struct dasd_sneq *)private->conf_data; + for (i = 0; i < count; ++i) { + if (sneq->flags.identifier == 1 && sneq->format == 1) + private->sneq = sneq; + else if (sneq->flags.identifier == 1 && sneq->format == 4) + private->vdsneq = (struct vd_sneq *)sneq; + else if (sneq->flags.identifier == 2) + private->gneq = (struct dasd_gneq *)sneq; + else if (sneq->flags.identifier == 3 && sneq->res1 == 1) + private->ned = (struct dasd_ned *)sneq; + sneq++; + } + if (!private->ned || !private->gneq) { + private->ned = NULL; + private->sneq = NULL; + private->vdsneq = NULL; + private->gneq = NULL; + return -EINVAL; + } + return 0; + +}; + +static unsigned char dasd_eckd_path_access(void *conf_data, int conf_len) +{ + struct dasd_gneq *gneq; + int i, count, found; + + count = conf_len / sizeof(*gneq); + gneq = (struct dasd_gneq *)conf_data; + found = 0; + for (i = 0; i < count; ++i) { + if (gneq->flags.identifier == 2) { + found = 1; + break; + } + gneq++; + } + if (found) + return ((char *)gneq)[18] & 0x07; + else + return 0; +} + +static int dasd_eckd_read_conf(struct dasd_device *device) { void *conf_data; int conf_len, conf_data_saved; @@ -661,7 +728,6 @@ dasd_eckd_read_conf(struct dasd_device *device) path_data->opm = ccw_device_get_path_mask(device->cdev); lpm = 0x80; conf_data_saved = 0; - /* get configuration data per operational path */ for (lpm = 0x80; lpm; lpm>>= 1) { if (lpm & path_data->opm){ @@ -678,22 +744,20 @@ dasd_eckd_read_conf(struct dasd_device *device) "data retrieved"); continue; /* no error */ } - if (conf_len != sizeof(struct dasd_eckd_confdata)) { - MESSAGE(KERN_WARNING, - "sizes of configuration data mismatch" - "%d (read) vs %ld (expected)", - conf_len, - sizeof(struct dasd_eckd_confdata)); - kfree(conf_data); - continue; /* no error */ - } /* save first valid configuration data */ - if (!conf_data_saved){ - memcpy(&private->conf_data, conf_data, - sizeof(struct dasd_eckd_confdata)); + if (!conf_data_saved) { + kfree(private->conf_data); + private->conf_data = conf_data; + private->conf_len = conf_len; + if (dasd_eckd_identify_conf_parts(private)) { + private->conf_data = NULL; + private->conf_len = 0; + kfree(conf_data); + continue; + } conf_data_saved++; } - switch (((char *)conf_data)[242] & 0x07){ + switch (dasd_eckd_path_access(conf_data, conf_len)) { case 0x02: path_data->npm |= lpm; break; @@ -701,7 +765,8 @@ dasd_eckd_read_conf(struct dasd_device *device) path_data->ppm |= lpm; break; } - kfree(conf_data); + if (conf_data != private->conf_data) + kfree(conf_data); } } return 0; @@ -952,6 +1017,7 @@ out_err2: dasd_free_block(device->block); device->block = NULL; out_err1: + kfree(private->conf_data); kfree(device->private); device->private = NULL; return rc; @@ -959,7 +1025,17 @@ out_err1: static void dasd_eckd_uncheck_device(struct dasd_device *device) { + struct dasd_eckd_private *private; + + private = (struct dasd_eckd_private *) device->private; dasd_alias_disconnect_device_from_lcu(device); + private->ned = NULL; + private->sneq = NULL; + private->vdsneq = NULL; + private->gneq = NULL; + private->conf_len = 0; + kfree(private->conf_data); + private->conf_data = NULL; } static struct dasd_ccw_req * @@ -1746,9 +1822,10 @@ dasd_eckd_fill_info(struct dasd_device * device, info->characteristics_size = sizeof(struct dasd_eckd_characteristics); memcpy(info->characteristics, &private->rdc_data, sizeof(struct dasd_eckd_characteristics)); - info->confdata_size = sizeof(struct dasd_eckd_confdata); - memcpy(info->configuration_data, &private->conf_data, - sizeof(struct dasd_eckd_confdata)); + info->confdata_size = min((unsigned long)private->conf_len, + sizeof(info->configuration_data)); + memcpy(info->configuration_data, private->conf_data, + info->confdata_size); return 0; } diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h index fc2509c939bc..4bf0aa5112c1 100644 --- a/drivers/s390/block/dasd_eckd.h +++ b/drivers/s390/block/dasd_eckd.h @@ -231,133 +231,62 @@ struct dasd_eckd_characteristics { __u8 reserved3[10]; } __attribute__ ((packed)); -struct dasd_eckd_confdata { +/* elements of the configuration data */ +struct dasd_ned { struct { - struct { - unsigned char identifier:2; - unsigned char token_id:1; - unsigned char sno_valid:1; - unsigned char subst_sno:1; - unsigned char recNED:1; - unsigned char emuNED:1; - unsigned char reserved:1; - } __attribute__ ((packed)) flags; - __u8 descriptor; - __u8 dev_class; - __u8 reserved; - unsigned char dev_type[6]; - unsigned char dev_model[3]; - unsigned char HDA_manufacturer[3]; - unsigned char HDA_location[2]; - unsigned char HDA_seqno[12]; - __u8 ID; - __u8 unit_addr; - } __attribute__ ((packed)) ned1; - union { - struct { - struct { - unsigned char identifier:2; - unsigned char token_id:1; - unsigned char sno_valid:1; - unsigned char subst_sno:1; - unsigned char recNED:1; - unsigned char emuNED:1; - unsigned char reserved:1; - } __attribute__ ((packed)) flags; - __u8 descriptor; - __u8 reserved[2]; - unsigned char dev_type[6]; - unsigned char dev_model[3]; - unsigned char DASD_manufacturer[3]; - unsigned char DASD_location[2]; - unsigned char DASD_seqno[12]; - __u16 ID; - } __attribute__ ((packed)) ned; - struct { - unsigned char flags; /* byte 0 */ - unsigned char res1; /* byte 1 */ - __u16 format; /* byte 2-3 */ - unsigned char res2[4]; /* byte 4-7 */ - unsigned char sua_flags; /* byte 8 */ - __u8 base_unit_addr; /* byte 9 */ - unsigned char res3[22]; /* byte 10-31 */ - } __attribute__ ((packed)) sneq; - } __attribute__ ((packed)) ned2; + __u8 identifier:2; + __u8 token_id:1; + __u8 sno_valid:1; + __u8 subst_sno:1; + __u8 recNED:1; + __u8 emuNED:1; + __u8 reserved:1; + } __attribute__ ((packed)) flags; + __u8 descriptor; + __u8 dev_class; + __u8 reserved; + __u8 dev_type[6]; + __u8 dev_model[3]; + __u8 HDA_manufacturer[3]; + __u8 HDA_location[2]; + __u8 HDA_seqno[12]; + __u8 ID; + __u8 unit_addr; +} __attribute__ ((packed)); + +struct dasd_sneq { struct { - struct { - unsigned char identifier:2; - unsigned char token_id:1; - unsigned char sno_valid:1; - unsigned char subst_sno:1; - unsigned char recNED:1; - unsigned char emuNED:1; - unsigned char reserved:1; - } __attribute__ ((packed)) flags; - __u8 descriptor; - __u8 reserved[2]; - unsigned char cont_type[6]; - unsigned char cont_model[3]; - unsigned char cont_manufacturer[3]; - unsigned char cont_location[2]; - unsigned char cont_seqno[12]; - __u16 ID; - } __attribute__ ((packed)) ned3; + __u8 identifier:2; + __u8 reserved:6; + } __attribute__ ((packed)) flags; + __u8 res1; + __u16 format; + __u8 res2[4]; /* byte 4- 7 */ + __u8 sua_flags; /* byte 8 */ + __u8 base_unit_addr; /* byte 9 */ + __u8 res3[22]; /* byte 10-31 */ +} __attribute__ ((packed)); + +struct vd_sneq { struct { - struct { - unsigned char identifier:2; - unsigned char token_id:1; - unsigned char sno_valid:1; - unsigned char subst_sno:1; - unsigned char recNED:1; - unsigned char emuNED:1; - unsigned char reserved:1; - } __attribute__ ((packed)) flags; - __u8 descriptor; - __u8 reserved[2]; - unsigned char cont_type[6]; - unsigned char empty[3]; - unsigned char cont_manufacturer[3]; - unsigned char cont_location[2]; - unsigned char cont_seqno[12]; - __u16 ID; - } __attribute__ ((packed)) ned4; - unsigned char ned5[32]; - unsigned char ned6[32]; - unsigned char ned7[32]; + __u8 identifier:2; + __u8 reserved:6; + } __attribute__ ((packed)) flags; + __u8 res1; + __u16 format; + __u8 res2[4]; /* byte 4- 7 */ + __u8 uit[16]; /* byte 8-23 */ + __u8 res3[8]; /* byte 24-31 */ +} __attribute__ ((packed)); + +struct dasd_gneq { struct { - struct { - unsigned char identifier:2; - unsigned char reserved:6; - } __attribute__ ((packed)) flags; - __u8 selector; - __u16 interfaceID; - __u32 reserved; - __u16 subsystemID; - struct { - unsigned char sp0:1; - unsigned char sp1:1; - unsigned char reserved:5; - unsigned char scluster:1; - } __attribute__ ((packed)) spathID; - __u8 unit_address; - __u8 dev_ID; - __u8 dev_address; - __u8 adapterID; - __u16 link_address; - struct { - unsigned char parallel:1; - unsigned char escon:1; - unsigned char reserved:1; - unsigned char ficon:1; - unsigned char reserved2:4; - } __attribute__ ((packed)) protocol_type; - struct { - unsigned char PID_in_236:1; - unsigned char reserved:7; - } __attribute__ ((packed)) format_flags; - __u8 log_dev_address; - unsigned char reserved2[12]; - } __attribute__ ((packed)) neq; + __u8 identifier:2; + __u8 reserved:6; + } __attribute__ ((packed)) flags; + __u8 reserved[7]; + __u16 subsystemID; + __u8 reserved2[22]; } __attribute__ ((packed)); struct dasd_eckd_path { @@ -463,7 +392,14 @@ struct alias_pav_group { struct dasd_eckd_private { struct dasd_eckd_characteristics rdc_data; - struct dasd_eckd_confdata conf_data; + u8 *conf_data; + int conf_len; + /* pointers to specific parts in the conf_data */ + struct dasd_ned *ned; + struct dasd_sneq *sneq; + struct vd_sneq *vdsneq; + struct dasd_gneq *gneq; + struct dasd_eckd_path path_data; struct eckd_count count_area[5]; int init_cqr_status; diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index fb2f931cf844..31ecaa4a40e4 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -307,6 +307,7 @@ struct dasd_uid { __u16 ssid; __u8 real_unit_addr; __u8 base_unit_addr; + char vduit[33]; }; /* -- cgit v1.2.3 From 3a95e8eb34f595a0144adb6e5513d456319bd8a5 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Fri, 1 Aug 2008 16:39:10 +0200 Subject: [S390] ipl: Reboot from alternate device does not work when booting from file During startup we check if diag308 works using diag 308 subcode 6, which stores the actual ipl information. This fails with rc = 0x102, if the system has been ipled from the HMC using load from CD or load from file. In the case of rc = 0x102 we have to assume that diag 308 is working, since it still can be used to ipl from an alternative device. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ipl.c | 5 ++++- include/asm-s390/ipl.h | 3 ++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 54b2779b5e2f..2dcf590faba6 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -1705,7 +1705,10 @@ void __init setup_ipl(void) void __init ipl_update_parameters(void) { - if (diag308(DIAG308_STORE, &ipl_block) == DIAG308_RC_OK) + int rc; + + rc = diag308(DIAG308_STORE, &ipl_block); + if ((rc == DIAG308_RC_OK) || (rc == DIAG308_RC_NOCONFIG)) diag308_set_works = 1; } diff --git a/include/asm-s390/ipl.h b/include/asm-s390/ipl.h index eaca6dff5405..1171e6d144a3 100644 --- a/include/asm-s390/ipl.h +++ b/include/asm-s390/ipl.h @@ -159,7 +159,8 @@ enum diag308_vm_flags { }; enum diag308_rc { - DIAG308_RC_OK = 1, + DIAG308_RC_OK = 0x0001, + DIAG308_RC_NOCONFIG = 0x0102, }; extern int diag308(unsigned long subcode, void *addr); -- cgit v1.2.3 From 934b2857cc576ae53c92a66e63fce7ddcfa74691 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:11 +0200 Subject: [S390] nohz/sclp: disable timer on synchronous waits. sclp_sync_wait wait synchronously for an sclp interrupt and disables timer interrupts. However on the irq enter paths there is an extra check if a timer interrupt would be due and calls the timer callback. This would schedule softirqs in the wrong context. So introduce local_tick_enable/disable which prevents this. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/lib/delay.c | 4 ++-- drivers/s390/char/sclp.c | 6 ++++-- include/asm-s390/hardirq.h | 14 ++++++++++++++ 3 files changed, 20 insertions(+), 4 deletions(-) diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index eae21a8ac72d..fc6ab6094df8 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -43,7 +43,7 @@ void __udelay(unsigned long usecs) local_bh_disable(); local_irq_save(flags); if (raw_irqs_disabled_flags(flags)) { - old_cc = S390_lowcore.clock_comparator; + old_cc = local_tick_disable(); S390_lowcore.clock_comparator = -1ULL; __ctl_store(cr0, 0, 0); dummy = (cr0 & 0xffff00e0) | 0x00000800; @@ -65,7 +65,7 @@ void __udelay(unsigned long usecs) if (raw_irqs_disabled_flags(flags)) { __ctl_load(cr0, 0, 0); - S390_lowcore.clock_comparator = old_cc; + local_tick_enable(old_cc); } if (!irq_context) _local_bh_enable(); diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c index 3c8b25e6c345..1fd8f2193ed8 100644 --- a/drivers/s390/char/sclp.c +++ b/drivers/s390/char/sclp.c @@ -399,6 +399,7 @@ sclp_tod_from_jiffies(unsigned long jiffies) void sclp_sync_wait(void) { + unsigned long long old_tick; unsigned long flags; unsigned long cr0, cr0_sync; u64 timeout; @@ -419,11 +420,12 @@ sclp_sync_wait(void) if (!irq_context) local_bh_disable(); /* Enable service-signal interruption, disable timer interrupts */ + old_tick = local_tick_disable(); trace_hardirqs_on(); __ctl_store(cr0, 0, 0); cr0_sync = cr0; + cr0_sync &= 0xffff00a0; cr0_sync |= 0x00000200; - cr0_sync &= 0xFFFFF3AC; __ctl_load(cr0_sync, 0, 0); __raw_local_irq_stosm(0x01); /* Loop until driver state indicates finished request */ @@ -439,9 +441,9 @@ sclp_sync_wait(void) __ctl_load(cr0, 0, 0); if (!irq_context) _local_bh_enable(); + local_tick_enable(old_tick); local_irq_restore(flags); } - EXPORT_SYMBOL(sclp_sync_wait); /* Dispatch changes in send and receive mask to registered listeners. */ diff --git a/include/asm-s390/hardirq.h b/include/asm-s390/hardirq.h index 4b7cb964ff35..89ec7056da28 100644 --- a/include/asm-s390/hardirq.h +++ b/include/asm-s390/hardirq.h @@ -34,4 +34,18 @@ typedef struct { void clock_comparator_work(void); +static inline unsigned long long local_tick_disable(void) +{ + unsigned long long old; + + old = S390_lowcore.clock_comparator; + S390_lowcore.clock_comparator = -1ULL; + return old; +} + +static inline void local_tick_enable(unsigned long long comp) +{ + S390_lowcore.clock_comparator = comp; +} + #endif /* __ASM_HARDIRQ_H */ -- cgit v1.2.3 From a4b526b3ba6353cd89a38e41da48ed83b0ead16f Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 1 Aug 2008 16:39:12 +0200 Subject: [S390] Optimize storage key operations for anon pages For anonymous pages without a swap cache backing the check in page_remove_rmap for the physical dirty bit in page_remove_rmap is unnecessary. The instructions that are used to check and reset the dirty bit are expensive. Removing the check noticably speeds up process exit. In addition the clearing of the dirty bit in __SetPageUptodate is pointless as well. With these two changes there is no storage key operation for an anonymous page anymore if it does not hit the swap space. The micro benchmark which repeatedly executes an empty shell script gets about 5% faster. Signed-off-by: Martin Schwidefsky --- include/linux/page-flags.h | 3 --- mm/rmap.c | 3 ++- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 54590a9a103e..25aaccdb2f26 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -239,9 +239,6 @@ static inline void __SetPageUptodate(struct page *page) { smp_wmb(); __set_bit(PG_uptodate, &(page)->flags); -#ifdef CONFIG_S390 - page_clear_dirty(page); -#endif } static inline void SetPageUptodate(struct page *page) diff --git a/mm/rmap.c b/mm/rmap.c index 99bc3f9cd796..94a5246a3f98 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -667,7 +667,8 @@ void page_remove_rmap(struct page *page, struct vm_area_struct *vma) * Leaving it set also helps swapoff to reinstate ptes * faster for those pages still in swapcache. */ - if (page_test_dirty(page)) { + if ((!PageAnon(page) || PageSwapCache(page)) && + page_test_dirty(page)) { page_clear_dirty(page); set_page_dirty(page); } -- cgit v1.2.3 From 683d718a893575a88c551ad71ea2c382eedbf67e Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Fri, 1 Aug 2008 16:39:13 +0200 Subject: [S390] qeth: preallocated qeth header for hiper socket For hiper socket devices this patch will economize the reallocation of the tx skb data segment by allocating separate memory for the qdio transport information (qeth header). Signed-off-by: Frank Blaschka Signed-off-by: Martin Schwidefsky --- drivers/s390/net/qeth_core.h | 5 ++-- drivers/s390/net/qeth_core_main.c | 59 ++++++++++++++++++++++++++++++--------- drivers/s390/net/qeth_l2_main.c | 50 +++++++++++++++++++++++++-------- drivers/s390/net/qeth_l3_main.c | 51 ++++++++++++++++++++++++--------- 4 files changed, 126 insertions(+), 39 deletions(-) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 1895dbb553cd..80971c21ea1a 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -419,6 +419,7 @@ struct qeth_qdio_out_buffer { int next_element_to_fill; struct sk_buff_head skb_list; struct list_head ctx_list; + int is_header[16]; }; struct qeth_card; @@ -785,7 +786,7 @@ void qeth_core_remove_osn_attributes(struct device *); /* exports for qeth discipline device drivers */ extern struct qeth_card_list_struct qeth_core_card_list; - +extern struct kmem_cache *qeth_core_header_cache; extern struct qeth_dbf_info qeth_dbf[QETH_DBF_INFOS]; void qeth_set_allowed_threads(struct qeth_card *, unsigned long , int); @@ -843,7 +844,7 @@ int qeth_get_priority_queue(struct qeth_card *, struct sk_buff *, int, int); int qeth_get_elements_no(struct qeth_card *, void *, struct sk_buff *, int); int qeth_do_send_packet_fast(struct qeth_card *, struct qeth_qdio_out_q *, struct sk_buff *, struct qeth_hdr *, int, - struct qeth_eddp_context *); + struct qeth_eddp_context *, int, int); int qeth_do_send_packet(struct qeth_card *, struct qeth_qdio_out_q *, struct sk_buff *, struct qeth_hdr *, int, struct qeth_eddp_context *); diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index cebb25e36e82..7a5549919717 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -48,6 +48,8 @@ EXPORT_SYMBOL_GPL(qeth_dbf); struct qeth_card_list_struct qeth_core_card_list; EXPORT_SYMBOL_GPL(qeth_core_card_list); +struct kmem_cache *qeth_core_header_cache; +EXPORT_SYMBOL_GPL(qeth_core_header_cache); static struct device *qeth_core_root_dev; static unsigned int known_devices[][10] = QETH_MODELLIST_ARRAY; @@ -933,6 +935,10 @@ static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue, } qeth_eddp_buf_release_contexts(buf); for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(queue->card); ++i) { + if (buf->buffer->element[i].addr && buf->is_header[i]) + kmem_cache_free(qeth_core_header_cache, + buf->buffer->element[i].addr); + buf->is_header[i] = 0; buf->buffer->element[i].length = 0; buf->buffer->element[i].addr = NULL; buf->buffer->element[i].flags = 0; @@ -3002,8 +3008,8 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr, if (skb_shinfo(skb)->nr_frags > 0) elements_needed = (skb_shinfo(skb)->nr_frags + 1); if (elements_needed == 0) - elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE) - + skb->len) >> PAGE_SHIFT); + elements_needed = 1 + (((((unsigned long) skb->data) % + PAGE_SIZE) + skb->len) >> PAGE_SHIFT); if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) { QETH_DBF_MESSAGE(2, "Invalid size of IP packet " "(Number=%d / Length=%d). Discarded.\n", @@ -3015,7 +3021,8 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr, EXPORT_SYMBOL_GPL(qeth_get_elements_no); static inline void __qeth_fill_buffer(struct sk_buff *skb, - struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill) + struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill, + int offset) { int length = skb->len; int length_here; @@ -3027,6 +3034,11 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb, data = skb->data; first_lap = (is_tso == 0 ? 1 : 0); + if (offset >= 0) { + data = skb->data + offset; + first_lap = 0; + } + while (length > 0) { /* length_here is the remaining amount of data in this page */ length_here = PAGE_SIZE - ((unsigned long) data % PAGE_SIZE); @@ -3058,22 +3070,22 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb, } static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue, - struct qeth_qdio_out_buffer *buf, struct sk_buff *skb) + struct qeth_qdio_out_buffer *buf, struct sk_buff *skb, + struct qeth_hdr *hdr, int offset, int hd_len) { struct qdio_buffer *buffer; - struct qeth_hdr_tso *hdr; int flush_cnt = 0, hdr_len, large_send = 0; buffer = buf->buffer; atomic_inc(&skb->users); skb_queue_tail(&buf->skb_list, skb); - hdr = (struct qeth_hdr_tso *) skb->data; /*check first on TSO ....*/ - if (hdr->hdr.hdr.l3.id == QETH_HEADER_TYPE_TSO) { + if (hdr->hdr.l3.id == QETH_HEADER_TYPE_TSO) { int element = buf->next_element_to_fill; - hdr_len = sizeof(struct qeth_hdr_tso) + hdr->ext.dg_hdr_len; + hdr_len = sizeof(struct qeth_hdr_tso) + + ((struct qeth_hdr_tso *)hdr)->ext.dg_hdr_len; /*fill first buffer entry only with header information */ buffer->element[element].addr = skb->data; buffer->element[element].length = hdr_len; @@ -3083,9 +3095,20 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue, skb->len -= hdr_len; large_send = 1; } + + if (offset >= 0) { + int element = buf->next_element_to_fill; + buffer->element[element].addr = hdr; + buffer->element[element].length = sizeof(struct qeth_hdr) + + hd_len; + buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG; + buf->is_header[element] = 1; + buf->next_element_to_fill++; + } + if (skb_shinfo(skb)->nr_frags == 0) __qeth_fill_buffer(skb, buffer, large_send, - (int *)&buf->next_element_to_fill); + (int *)&buf->next_element_to_fill, offset); else __qeth_fill_buffer_frag(skb, buffer, large_send, (int *)&buf->next_element_to_fill); @@ -3115,7 +3138,7 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue, int qeth_do_send_packet_fast(struct qeth_card *card, struct qeth_qdio_out_q *queue, struct sk_buff *skb, struct qeth_hdr *hdr, int elements_needed, - struct qeth_eddp_context *ctx) + struct qeth_eddp_context *ctx, int offset, int hd_len) { struct qeth_qdio_out_buffer *buffer; int buffers_needed = 0; @@ -3148,7 +3171,7 @@ int qeth_do_send_packet_fast(struct qeth_card *card, } atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); if (ctx == NULL) { - qeth_fill_buffer(queue, buffer, skb); + qeth_fill_buffer(queue, buffer, skb, hdr, offset, hd_len); qeth_flush_buffers(queue, index, 1); } else { flush_cnt = qeth_eddp_fill_buffer(queue, ctx, index); @@ -3224,7 +3247,7 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue, } } if (ctx == NULL) - tmp = qeth_fill_buffer(queue, buffer, skb); + tmp = qeth_fill_buffer(queue, buffer, skb, hdr, -1, 0); else { tmp = qeth_eddp_fill_buffer(queue, ctx, queue->next_buf_to_fill); @@ -4443,8 +4466,17 @@ static int __init qeth_core_init(void) rc = IS_ERR(qeth_core_root_dev) ? PTR_ERR(qeth_core_root_dev) : 0; if (rc) goto register_err; - return 0; + qeth_core_header_cache = kmem_cache_create("qeth_hdr", + sizeof(struct qeth_hdr) + ETH_HLEN, 64, 0, NULL); + if (!qeth_core_header_cache) { + rc = -ENOMEM; + goto slab_err; + } + + return 0; +slab_err: + s390_root_dev_unregister(qeth_core_root_dev); register_err: driver_remove_file(&qeth_core_ccwgroup_driver.driver, &driver_attr_group); @@ -4466,6 +4498,7 @@ static void __exit qeth_core_exit(void) &driver_attr_group); ccwgroup_driver_unregister(&qeth_core_ccwgroup_driver); ccw_driver_unregister(&qeth_ccw_driver); + kmem_cache_destroy(qeth_core_header_cache); qeth_unregister_dbf_views(); PRINT_INFO("core functions removed\n"); } diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index a8b069cd9a4c..b3cee032f578 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -243,8 +243,7 @@ static void qeth_l2_get_packet_type(struct qeth_card *card, static void qeth_l2_fill_header(struct qeth_card *card, struct qeth_hdr *hdr, struct sk_buff *skb, int ipv, int cast_type) { - struct vlan_ethhdr *veth = (struct vlan_ethhdr *)((skb->data) + - QETH_HEADER_SIZE); + struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb_mac_header(skb); memset(hdr, 0, sizeof(struct qeth_hdr)); hdr->hdr.l2.id = QETH_HEADER_TYPE_LAYER2; @@ -621,6 +620,9 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) int tx_bytes = skb->len; enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO; struct qeth_eddp_context *ctx = NULL; + int data_offset = -1; + int elements_needed = 0; + int hd_len = 0; if ((card->state != CARD_STATE_UP) || !card->lan_online) { card->stats.tx_carrier_errors++; @@ -643,13 +645,32 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) if (card->info.type == QETH_CARD_TYPE_OSN) hdr = (struct qeth_hdr *)skb->data; else { - /* create a clone with writeable headroom */ - new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr)); - if (!new_skb) - goto tx_drop; - hdr = (struct qeth_hdr *)skb_push(new_skb, + if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) && + (skb_shinfo(skb)->nr_frags == 0)) { + new_skb = skb; + data_offset = ETH_HLEN; + hd_len = ETH_HLEN; + hdr = kmem_cache_alloc(qeth_core_header_cache, + GFP_ATOMIC); + if (!hdr) + goto tx_drop; + elements_needed++; + skb_reset_mac_header(new_skb); + qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type); + hdr->hdr.l2.pkt_length = new_skb->len; + memcpy(((char *)hdr) + sizeof(struct qeth_hdr), + skb_mac_header(new_skb), ETH_HLEN); + } else { + /* create a clone with writeable headroom */ + new_skb = skb_realloc_headroom(skb, + sizeof(struct qeth_hdr)); + if (!new_skb) + goto tx_drop; + hdr = (struct qeth_hdr *)skb_push(new_skb, sizeof(struct qeth_hdr)); - qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type); + skb_set_mac_header(new_skb, sizeof(struct qeth_hdr)); + qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type); + } } if (large_send == QETH_LARGE_SEND_EDDP) { @@ -660,9 +681,13 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) goto tx_drop; } } else { - elements = qeth_get_elements_no(card, (void *)hdr, new_skb, 0); - if (!elements) + elements = qeth_get_elements_no(card, (void *)hdr, new_skb, + elements_needed); + if (!elements) { + if (data_offset >= 0) + kmem_cache_free(qeth_core_header_cache, hdr); goto tx_drop; + } } if ((large_send == QETH_LARGE_SEND_NO) && @@ -674,7 +699,7 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) elements, ctx); else rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr, - elements, ctx); + elements, ctx, data_offset, hd_len); if (!rc) { card->stats.tx_packets++; card->stats.tx_bytes += tx_bytes; @@ -701,6 +726,9 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) if (ctx != NULL) qeth_eddp_put_context(ctx); + if (data_offset >= 0) + kmem_cache_free(qeth_core_header_cache, hdr); + if (rc == -EBUSY) { if (new_skb != skb) dev_kfree_skb_any(new_skb); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 3e1d13857350..dd72c3c20165 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2604,6 +2604,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) int tx_bytes = skb->len; enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO; struct qeth_eddp_context *ctx = NULL; + int data_offset = -1; if ((card->info.type == QETH_CARD_TYPE_IQD) && (skb->protocol != htons(ETH_P_IPV6)) && @@ -2624,14 +2625,28 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) card->perf_stats.outbound_start_time = qeth_get_micros(); } - /* create a clone with writeable headroom */ - new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso) + - VLAN_HLEN); - if (!new_skb) - goto tx_drop; + if (skb_is_gso(skb)) + large_send = card->options.large_send; + + if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) && + (skb_shinfo(skb)->nr_frags == 0)) { + new_skb = skb; + data_offset = ETH_HLEN; + hdr = kmem_cache_alloc(qeth_core_header_cache, GFP_ATOMIC); + if (!hdr) + goto tx_drop; + elements_needed++; + } else { + /* create a clone with writeable headroom */ + new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso) + + VLAN_HLEN); + if (!new_skb) + goto tx_drop; + } if (card->info.type == QETH_CARD_TYPE_IQD) { - skb_pull(new_skb, ETH_HLEN); + if (data_offset < 0) + skb_pull(new_skb, ETH_HLEN); } else { if (new_skb->protocol == htons(ETH_P_IP)) { if (card->dev->type == ARPHRD_IEEE802_TR) @@ -2657,9 +2672,6 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) netif_stop_queue(dev); - if (skb_is_gso(new_skb)) - large_send = card->options.large_send; - /* fix hardware limitation: as long as we do not have sbal * chaining we can not send long frag lists so we temporary * switch to EDDP @@ -2677,9 +2689,16 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) qeth_tso_fill_header(card, hdr, new_skb); elements_needed++; } else { - hdr = (struct qeth_hdr *)skb_push(new_skb, + if (data_offset < 0) { + hdr = (struct qeth_hdr *)skb_push(new_skb, sizeof(struct qeth_hdr)); - qeth_l3_fill_header(card, hdr, new_skb, ipv, cast_type); + qeth_l3_fill_header(card, hdr, new_skb, ipv, + cast_type); + } else { + qeth_l3_fill_header(card, hdr, new_skb, ipv, + cast_type); + hdr->hdr.l3.length = new_skb->len - data_offset; + } } if (large_send == QETH_LARGE_SEND_EDDP) { @@ -2695,8 +2714,11 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) } else { int elems = qeth_get_elements_no(card, (void *)hdr, new_skb, elements_needed); - if (!elems) + if (!elems) { + if (data_offset >= 0) + kmem_cache_free(qeth_core_header_cache, hdr); goto tx_drop; + } elements_needed += elems; } @@ -2709,7 +2731,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) elements_needed, ctx); else rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr, - elements_needed, ctx); + elements_needed, ctx, data_offset, 0); if (!rc) { card->stats.tx_packets++; @@ -2737,6 +2759,9 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) if (ctx != NULL) qeth_eddp_put_context(ctx); + if (data_offset >= 0) + kmem_cache_free(qeth_core_header_cache, hdr); + if (rc == -EBUSY) { if (new_skb != skb) dev_kfree_skb_any(new_skb); -- cgit v1.2.3 From 883e512c99fc398d1b2b5e8e92b6bacff2551756 Mon Sep 17 00:00:00 2001 From: Michael Ernst Date: Fri, 1 Aug 2008 16:39:14 +0200 Subject: [S390] cio: Memory allocation for idset changed. Memory allocation for the quite huge idset changed from kzalloc to vmalloc. Signed-off-by: Michael Ernst Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/idset.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/s390/cio/idset.c b/drivers/s390/cio/idset.c index ef7bc0a125ef..cf8f24a4b5eb 100644 --- a/drivers/s390/cio/idset.c +++ b/drivers/s390/cio/idset.c @@ -5,7 +5,7 @@ * Author(s): Peter Oberparleiter */ -#include +#include #include #include "idset.h" #include "css.h" @@ -25,18 +25,18 @@ static struct idset *idset_new(int num_ssid, int num_id) { struct idset *set; - set = kzalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id), - GFP_KERNEL); + set = vmalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id)); if (set) { set->num_ssid = num_ssid; set->num_id = num_id; + memset(set->bitmap, 0, bitmap_size(num_ssid, num_id)); } return set; } void idset_free(struct idset *set) { - kfree(set); + vfree(set); } void idset_clear(struct idset *set) -- cgit v1.2.3 From 519620cc3d723d41522191ebd150fba4a3790296 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:15 +0200 Subject: [S390] Wire up new syscalls. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/compat_wrapper.S | 37 +++++++++++++++++++++++++++++++++++++ arch/s390/kernel/syscalls.S | 6 ++++++ include/asm-s390/unistd.h | 8 +++++++- 3 files changed, 50 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index d003a6e16afb..328a20e880b5 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1732,3 +1732,40 @@ compat_sys_timerfd_gettime_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # struct compat_itimerspec * jg compat_sys_timerfd_gettime + + .globl compat_sys_signalfd4_wrapper +compat_sys_signalfd4_wrapper: + lgfr %r2,%r2 # int + llgtr %r3,%r3 # compat_sigset_t * + llgfr %r4,%r4 # compat_size_t + lgfr %r5,%r5 # int + jg compat_sys_signalfd4 + + .globl sys_eventfd2_wrapper +sys_eventfd2_wrapper: + llgfr %r2,%r2 # unsigned int + lgfr %r3,%r3 # int + jg sys_eventfd2 + + .globl sys_inotify_init1_wrapper +sys_inotify_init1_wrapper: + lgfr %r2,%r2 # int + jg sys_inotify_init1 + + .globl sys_pipe2_wrapper +sys_pipe2_wrapper: + llgtr %r2,%r2 # u32 * + lgfr %r3,%r3 # int + jg sys_pipe2 # branch to system call + + .globl sys_dup3_wrapper +sys_dup3_wrapper: + llgfr %r2,%r2 # unsigned int + llgfr %r3,%r3 # unsigned int + lgfr %r4,%r4 # int + jg sys_dup3 # branch to system call + + .globl sys_epoll_create1_wrapper +sys_epoll_create1_wrapper: + lgfr %r2,%r2 # int + jg sys_epoll_create1 # branch to system call diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index c87ec687d4c6..c66d35e55142 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -330,3 +330,9 @@ SYSCALL(sys_eventfd,sys_eventfd,sys_eventfd_wrapper) SYSCALL(sys_timerfd_create,sys_timerfd_create,sys_timerfd_create_wrapper) SYSCALL(sys_timerfd_settime,sys_timerfd_settime,compat_sys_timerfd_settime_wrapper) /* 320 */ SYSCALL(sys_timerfd_gettime,sys_timerfd_gettime,compat_sys_timerfd_gettime_wrapper) +SYSCALL(sys_signalfd4,sys_signalfd4,compat_sys_signalfd4_wrapper) +SYSCALL(sys_eventfd2,sys_eventfd2,sys_eventfd2_wrapper) +SYSCALL(sys_inotify_init1,sys_inotify_init1,sys_inotify_init1_wrapper) +SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */ +SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper) +SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper) diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h index 583da807ea97..c8ad350d1444 100644 --- a/include/asm-s390/unistd.h +++ b/include/asm-s390/unistd.h @@ -259,7 +259,13 @@ #define __NR_timerfd_create 319 #define __NR_timerfd_settime 320 #define __NR_timerfd_gettime 321 -#define NR_syscalls 322 +#define __NR_signalfd4 322 +#define __NR_eventfd2 323 +#define __NR_inotify_init1 324 +#define __NR_pipe2 325 +#define __NR_dup3 326 +#define __NR_epoll_create1 327 +#define NR_syscalls 328 /* * There are some system calls that are not present on 64 bit, some -- cgit v1.2.3 From 7e9238fbc10373effc2c3b0b516b0bdc8fefc27b Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Fri, 1 Aug 2008 16:39:16 +0200 Subject: [S390] Add support for memory hot-remove. This patch enables memory hot-remove on s390. Signed-off-by: Gerald Schaefer Signed-off-by: Heiko Carstens Cc: Martin Schwidefsky --- arch/s390/Kconfig | 3 +++ arch/s390/mm/init.c | 13 ++++++++++++- drivers/s390/char/sclp_cmd.c | 5 +++++ 3 files changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 2ed88122be93..8d41908e2513 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -317,6 +317,9 @@ config ARCH_ENABLE_MEMORY_HOTPLUG def_bool y depends on SPARSEMEM +config ARCH_ENABLE_MEMORY_HOTREMOVE + def_bool y + source "mm/Kconfig" comment "I/O subsystem configuration" diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 4993b0f594eb..1169130a97ef 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -179,7 +179,7 @@ int arch_add_memory(int nid, u64 start, u64 size) int rc; pgdat = NODE_DATA(nid); - zone = pgdat->node_zones + ZONE_NORMAL; + zone = pgdat->node_zones + ZONE_MOVABLE; rc = vmem_add_mapping(start, size); if (rc) return rc; @@ -189,3 +189,14 @@ int arch_add_memory(int nid, u64 start, u64 size) return rc; } #endif /* CONFIG_MEMORY_HOTPLUG */ + +#ifdef CONFIG_MEMORY_HOTREMOVE +int remove_memory(u64 start, u64 size) +{ + unsigned long start_pfn, end_pfn; + + start_pfn = PFN_DOWN(start); + end_pfn = start_pfn + PFN_DOWN(size); + return offline_pages(start_pfn, end_pfn, 120 * HZ); +} +#endif /* CONFIG_MEMORY_HOTREMOVE */ diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index 0c2b77493db4..eb5f1b8bc57f 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -427,6 +427,8 @@ static int sclp_mem_notifier(struct notifier_block *nb, sclp_attach_storage(id); switch (action) { case MEM_ONLINE: + case MEM_GOING_OFFLINE: + case MEM_CANCEL_OFFLINE: break; case MEM_GOING_ONLINE: rc = sclp_mem_change_state(start, size, 1); @@ -434,6 +436,9 @@ static int sclp_mem_notifier(struct notifier_block *nb, case MEM_CANCEL_ONLINE: sclp_mem_change_state(start, size, 0); break; + case MEM_OFFLINE: + sclp_mem_change_state(start, size, 0); + break; default: rc = -EINVAL; break; -- cgit v1.2.3 From 3b8e3004aea95c687e8991583e7b150ec1416ff3 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Fri, 1 Aug 2008 16:39:17 +0200 Subject: [S390] qdio: make sure qdr is aligned to page size kzalloc does not guarantee the required alignment of qdr to page size, use get_zeroed_page instead. Signed-off-by: Jan Glauber --- drivers/s390/cio/qdio_main.c | 2 +- drivers/s390/cio/qdio_setup.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index d10c73cc1688..d15648514a0f 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -1355,7 +1355,7 @@ int qdio_allocate(struct qdio_initialize *init_data) goto out_rel; /* qdr is used in ccw1.cda which is u32 */ - irq_ptr->qdr = kzalloc(sizeof(struct qdr), GFP_KERNEL | GFP_DMA); + irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA); if (!irq_ptr->qdr) goto out_rel; WARN_ON((unsigned long)irq_ptr->qdr & 0xfff); diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c index f0923a8aceda..56fdd57ba192 100644 --- a/drivers/s390/cio/qdio_setup.c +++ b/drivers/s390/cio/qdio_setup.c @@ -325,7 +325,7 @@ void qdio_release_memory(struct qdio_irq *irq_ptr) kmem_cache_free(qdio_q_cache, q); } } - kfree(irq_ptr->qdr); + free_page((unsigned long) irq_ptr->qdr); free_page(irq_ptr->chsc_page); free_page((unsigned long) irq_ptr); } -- cgit v1.2.3 From d918fe2bd72830dfbe8ca2bb30d49930d1356e6d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:18 +0200 Subject: [S390] Remove diag 0x260 call from memory detection. The result of the diag 0x260 call is not always what one would expect. So just remove it. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/mem_detect.c | 23 ----------------------- 1 file changed, 23 deletions(-) diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c index 18ed7abe16c5..9872999c66d1 100644 --- a/arch/s390/kernel/mem_detect.c +++ b/arch/s390/kernel/mem_detect.c @@ -9,27 +9,6 @@ #include #include -static int memory_fast_detect(struct mem_chunk *chunk) -{ - unsigned long val0 = 0; - unsigned long val1 = 0xc; - int rc = -EOPNOTSUPP; - - if (ipl_flags & IPL_NSS_VALID) - return -EOPNOTSUPP; - asm volatile( - " diag %1,%2,0x260\n" - "0: lhi %0,0\n" - "1:\n" - EX_TABLE(0b,1b) - : "+d" (rc), "+d" (val0), "+d" (val1) : : "cc"); - - if (rc || val0 != val1) - return -EOPNOTSUPP; - chunk->size = val0 + 1; - return 0; -} - static inline int tprot(unsigned long addr) { int rc = -EFAULT; @@ -84,8 +63,6 @@ void detect_memory_layout(struct mem_chunk chunk[]) unsigned long flags, cr0; memset(chunk, 0, MEMORY_CHUNKS * sizeof(struct mem_chunk)); - if (memory_fast_detect(&chunk[0]) == 0) - return; /* Disable IRQs, DAT and low address protection so tprot does the * right thing and we don't get scheduled away with low address * protection disabled. -- cgit v1.2.3 From 8f8470032570988af2eeff520ca01a32fd908b2b Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:19 +0200 Subject: [S390] stp: fix section mismatch warning. Fix these two (false positive) warnings by adding an __init annoation: WARNING: vmlinux.o(.text+0x7e6a): Section mismatch in reference from the function stp_reset() to the function .init.text:__alloc_bootmem() The function stp_reset() references the function __init __alloc_bootmem(). This is often because stp_reset lacks a __init annotation or the annotation of __alloc_bootmem is wrong. WARNING: vmlinux.o(.text+0x7ece): Section mismatch in reference from the function stp_reset() to the function .init.text:free_bootmem() The function stp_reset() references the function __init free_bootmem(). This is often because stp_reset lacks a __init annotation or the annotation of free_bootmem is wrong. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index ab70d9bd9261..ca114fe46ffb 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -1348,7 +1348,7 @@ early_param("stp", early_parse_stp); /* * Reset STP attachment. */ -static void stp_reset(void) +static void __init stp_reset(void) { int rc; -- cgit v1.2.3 From 3f1934bc1a0dcc2b7c31c8fd4f41ea2dd6522c3e Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:20 +0200 Subject: [S390] qdio: fix section mismatch bug. Fix the two section mismatch warnings below. This fixes two real bugs since the code which has __exit annotations may already be gone when it is called. WARNING: vmlinux.o(.init.text+0x1cc4a): Section mismatch in reference from the function init_QDIO() to the function .exit.text:qdio_setup_exit() The function __init init_QDIO() references a function __exit qdio_setup_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __exit annotation of qdio_setup_exit() so it may be used outside an exit section. WARNING: vmlinux.o(.init.text+0x1cc7a): Section mismatch in reference from the function init_QDIO() to the function .exit.text:qdio_remove_perf_stats() The function __init init_QDIO() references a function __exit qdio_remove_perf_stats(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __exit annotation of qdio_remove_perf_stats() so it may be used outside an exit section. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio_perf.c | 2 +- drivers/s390/cio/qdio_setup.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c index ea01b85b1cc9..ec5c4a414235 100644 --- a/drivers/s390/cio/qdio_perf.c +++ b/drivers/s390/cio/qdio_perf.c @@ -142,7 +142,7 @@ int __init qdio_setup_perf_stats(void) return 0; } -void __exit qdio_remove_perf_stats(void) +void qdio_remove_perf_stats(void) { #ifdef CONFIG_PROC_FS remove_proc_entry("qdio_perf", NULL); diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c index 56fdd57ba192..1bd2a208db28 100644 --- a/drivers/s390/cio/qdio_setup.c +++ b/drivers/s390/cio/qdio_setup.c @@ -515,7 +515,7 @@ int __init qdio_setup_init(void) return 0; } -void __exit qdio_setup_exit(void) +void qdio_setup_exit(void) { kmem_cache_destroy(qdio_q_cache); } -- cgit v1.2.3 From 1378ee9b67298176edbcec0ab87b38e913d76ab9 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Fri, 1 Aug 2008 16:39:21 +0200 Subject: [S390] cio: Include linux/string.h in schid.h. schid.h needs string.h for memset and memcmp. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- include/asm-s390/schid.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-s390/schid.h b/include/asm-s390/schid.h index 7bdc0fe15691..825503cf3dc2 100644 --- a/include/asm-s390/schid.h +++ b/include/asm-s390/schid.h @@ -11,6 +11,7 @@ struct subchannel_id { } __attribute__ ((packed, aligned(4))); #ifdef __KERNEL__ +#include /* Helper function for sane state of pre-allocated subchannel_id. */ static inline void -- cgit v1.2.3 From 26f746f3e3bb44b37a894318aa8e808b914ad663 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:22 +0200 Subject: [S390] virtio console: fix section mismatch warning. Fix these two false positive warnings: WARNING: vmlinux.o(.text+0x2e1cc4): Section mismatch in reference from the function s390_virtio_console_init() to the function .init.text:early_put_chars() The function s390_virtio_console_init() references the function __init early_put_chars(). This is often because s390_virtio_console_init lacks a __init annotation or the annotation of early_put_chars is wrong. WARNING: vmlinux.o(.text+0x2e1cd0): Section mismatch in reference from the function s390_virtio_console_init() to the function .init.text:virtio_cons_early_init() The function s390_virtio_console_init() references the function __init virtio_cons_early_init(). This is often because s390_virtio_console_init lacks a __init annotation or the annotation of virtio_cons_early_init is wrong. Cc: Christian Borntraeger Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/kvm/kvm_virtio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index 79954bd6bfa5..292b60da6dc7 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -352,7 +352,7 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count) return len; } -void s390_virtio_console_init(void) +void __init s390_virtio_console_init(void) { virtio_cons_early_init(early_put_chars); } -- cgit v1.2.3 From fc7e1e4b1ca69109d0f694e47ef2328dcb0ebe6e Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:23 +0200 Subject: [S390] dont use kthread for smp_rescan_cpus(). Since git commit 3da1c84c00c7e5fa8348336bd8c342f9128b0f14 "workqueues: make get_online_cpus() useable for work->func()" it is safe to call get_online_cpus() from workqueue context. So remove the kthread workaround again. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_config.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/s390/char/sclp_config.c b/drivers/s390/char/sclp_config.c index fff4ff485d9b..4cebd6ee6d27 100644 --- a/drivers/s390/char/sclp_config.c +++ b/drivers/s390/char/sclp_config.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -41,19 +40,9 @@ static void sclp_cpu_capability_notify(struct work_struct *work) put_online_cpus(); } -static int sclp_cpu_kthread(void *data) -{ - smp_rescan_cpus(); - return 0; -} - static void __ref sclp_cpu_change_notify(struct work_struct *work) { - /* Can't call smp_rescan_cpus() from workqueue context since it may - * deadlock in case of cpu hotplug. So we have to create a kernel - * thread in order to call it. - */ - kthread_run(sclp_cpu_kthread, NULL, "cpu_rescan"); + smp_rescan_cpus(); } static void sclp_conf_receiver_fn(struct evbuf_header *evbuf) -- cgit v1.2.3 From ab4227cb2d936886069ef1056c02500d05beb15d Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 1 Aug 2008 16:39:24 +0200 Subject: [S390] qeth: avoid use of include/asm-s390 The planned move of include/asm-s390 to arch/s390/include/asm requires that all includes for asm headers use include/asm and not include/asm-s390. Signed-off-by: Martin Schwidefsky --- drivers/s390/net/qeth_core_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 7a5549919717..bd420d1b9a0d 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -19,8 +19,8 @@ #include #include -#include -#include +#include +#include #include #include "qeth_core.h" -- cgit v1.2.3 From e274f025e2caaadc1a6dd41adc9c9a19be075110 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 30 Jul 2008 12:34:59 -0700 Subject: [MTD] [NAND] Blackfin NFC Driver: fix bug - do not clobber the status from the first 256 bytes if operating on 512 pages Singed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/bf5xx_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index e87a57297328..3254348f8581 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -273,7 +273,7 @@ static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat, dat += 256; read_ecc += 8; calc_ecc += 8; - ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc); + ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc); } return ret; -- cgit v1.2.3 From cf840392e83914b9fcdbce8a8a2bc17a84cf0353 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 30 Jul 2008 12:35:00 -0700 Subject: [MTD] [NAND] Blackfin NFC Driver: fix bug - hw ecc calc by making sure we extract 11 bits from each register instead of 10 Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/bf5xx_nand.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 3254348f8581..fc58afe4733a 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -298,7 +298,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd, ecc0 = bfin_read_NFC_ECC0(); ecc1 = bfin_read_NFC_ECC1(); - code[0] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11); + code[0] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11); dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]); @@ -310,7 +310,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd, if (page_size == 512) { ecc0 = bfin_read_NFC_ECC2(); ecc1 = bfin_read_NFC_ECC3(); - code[1] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11); + code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11); /* second 3 bytes in ecc_code for second 256 * bytes of 512 page size -- cgit v1.2.3 From fcb90ba7e9ba9a17ca5103be3f3ae3a446dadc14 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 30 Jul 2008 12:35:01 -0700 Subject: [MTD] [NAND] Blackfin NFC Driver: add support for the ECC layout the Blackfin bootrom uses Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/Kconfig | 12 ++++++++++++ drivers/mtd/nand/bf5xx_nand.c | 40 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 52 insertions(+) diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 71406e517857..c075b47e11ad 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -109,6 +109,18 @@ config MTD_NAND_BF5XX_HWECC Enable the use of the BF5XX's internal ECC generator when using NAND. +config MTD_NAND_BF5XX_BOOTROM_ECC + bool "Use Blackfin BootROM ECC Layout" + default n + depends on MTD_NAND_BF5XX_HWECC + help + If you wish to modify NAND pages and allow the Blackfin on-chip + BootROM to boot from them, say Y here. This is only necessary + if you are booting U-Boot out of NAND and you wish to update + U-Boot from Linux' userspace. Otherwise, you should say N here. + + If unsure, say N. + config MTD_NAND_RTC_FROM4 tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)" depends on SH_SOLUTION_ENGINE diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index fc58afe4733a..3555f6b3ebe0 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -91,6 +91,41 @@ static const unsigned short bfin_nfc_pin_req[] = P_NAND_ALE, 0}; +#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC +static uint8_t bbt_pattern[] = { 0xff }; + +static struct nand_bbt_descr bootrom_bbt = { + .options = 0, + .offs = 63, + .len = 1, + .pattern = bbt_pattern, +}; + +static struct nand_ecclayout bootrom_ecclayout = { + .eccbytes = 24, + .eccpos = { + 0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2, + 0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2, + 0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2, + 0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2, + 0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2, + 0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2, + 0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2, + 0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2 + }, + .oobfree = { + { 0x8 * 0 + 3, 5 }, + { 0x8 * 1 + 3, 5 }, + { 0x8 * 2 + 3, 5 }, + { 0x8 * 3 + 3, 5 }, + { 0x8 * 4 + 3, 5 }, + { 0x8 * 5 + 3, 5 }, + { 0x8 * 6 + 3, 5 }, + { 0x8 * 7 + 3, 5 }, + } +}; +#endif + /* * Data structures for bf5xx nand flash controller driver */ @@ -712,6 +747,11 @@ static int bf5xx_nand_probe(struct platform_device *pdev) /* setup hardware ECC data struct */ if (hardware_ecc) { +#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC + chip->badblock_pattern = &bootrom_bbt; + chip->ecc.layout = &bootrom_ecclayout; +#endif + if (plat->page_size == NFC_PG_SIZE_256) { chip->ecc.bytes = 3; chip->ecc.size = 256; -- cgit v1.2.3 From 2445af3853928bf3ee7960e09f548a1b07924091 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 30 Jul 2008 12:35:02 -0700 Subject: [MTD] [NAND] Blackfin NFC Driver: add proper devinit/devexit markings to probe/remove functions Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/bf5xx_nand.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 3555f6b3ebe0..e259a7b75b2d 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -640,7 +640,7 @@ static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info) #endif } -static int bf5xx_nand_remove(struct platform_device *pdev) +static int __devexit bf5xx_nand_remove(struct platform_device *pdev) { struct bf5xx_nand_info *info = to_nand_info(pdev); struct mtd_info *mtd = NULL; @@ -673,7 +673,7 @@ static int bf5xx_nand_remove(struct platform_device *pdev) * it can allocate all necessary resources then calls the * nand layer to look for devices */ -static int bf5xx_nand_probe(struct platform_device *pdev) +static int __devinit bf5xx_nand_probe(struct platform_device *pdev) { struct bf5xx_nand_platform *plat = to_nand_plat(pdev); struct bf5xx_nand_info *info = NULL; @@ -815,7 +815,7 @@ static int bf5xx_nand_resume(struct platform_device *dev) /* driver device registration */ static struct platform_driver bf5xx_nand_driver = { .probe = bf5xx_nand_probe, - .remove = bf5xx_nand_remove, + .remove = __devexit_p(bf5xx_nand_remove), .suspend = bf5xx_nand_suspend, .resume = bf5xx_nand_resume, .driver = { -- cgit v1.2.3 From a0dd20184becf5c90996d9ee0bb69426fe63581a Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 30 Jul 2008 12:35:02 -0700 Subject: [MTD] [NAND] Blackfin NFC Driver: enable Blackfin nand HWECC support by default Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index c075b47e11ad..02f9cc30d77b 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -104,6 +104,7 @@ config MTD_NAND_BF5XX config MTD_NAND_BF5XX_HWECC bool "BF5XX NAND Hardware ECC" + default y depends on MTD_NAND_BF5XX help Enable the use of the BF5XX's internal ECC generator when -- cgit v1.2.3 From 0ee002b041cb45ab3cc5384b86271d41ccf90fe1 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 30 Jul 2008 12:35:03 -0700 Subject: [MTD] [NAND] Blackfin NFC Driver: use standard dev_err() rather than printk() Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/bf5xx_nand.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index e259a7b75b2d..6cf7fb86c256 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -684,8 +684,7 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "(%p)\n", pdev); if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) { - printk(KERN_ERR DRV_NAME - ": Requesting Peripherals failed\n"); + dev_err(&pdev->dev, "requesting Peripherals failed\n"); return -EFAULT; } -- cgit v1.2.3 From 4f0ca70e52b67f41287d853f0d572dafa875e485 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Wed, 30 Jul 2008 12:35:04 -0700 Subject: [MTD] [NAND] Blackfin NFC Driver: Cleanup the error exit path of bf5xx_nand_probe function Signed-off-by: Bryan Wu Cc: Mike Frysinger Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/bf5xx_nand.c | 38 ++++++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 14 deletions(-) diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 6cf7fb86c256..9af2a2cc1153 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -549,7 +549,6 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd, /* * System initialization functions */ - static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info) { int ret; @@ -582,6 +581,13 @@ static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info) return 0; } +static void bf5xx_nand_dma_remove(struct bf5xx_nand_info *info) +{ + /* Free NFC DMA channel */ + if (hardware_ecc) + free_dma(CH_NFC); +} + /* * BF5XX NFC hardware initialization * - pin mux setup @@ -658,6 +664,7 @@ static int __devexit bf5xx_nand_remove(struct platform_device *pdev) } peripheral_free_list(bfin_nfc_pin_req); + bf5xx_nand_dma_remove(info); /* free the common resources */ kfree(info); @@ -683,21 +690,21 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "(%p)\n", pdev); + if (!plat) { + dev_err(&pdev->dev, "no platform specific information\n"); + return -EINVAL; + } + if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) { dev_err(&pdev->dev, "requesting Peripherals failed\n"); return -EFAULT; } - if (!plat) { - dev_err(&pdev->dev, "no platform specific information\n"); - goto exit_error; - } - info = kzalloc(sizeof(*info), GFP_KERNEL); if (info == NULL) { dev_err(&pdev->dev, "no memory for flash info\n"); err = -ENOMEM; - goto exit_error; + goto out_err_kzalloc; } platform_set_drvdata(pdev, info); @@ -741,8 +748,8 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev) /* initialise the hardware */ err = bf5xx_nand_hw_init(info); - if (err != 0) - goto exit_error; + if (err) + goto out_err_hw_init; /* setup hardware ECC data struct */ if (hardware_ecc) { @@ -772,7 +779,7 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev) /* scan hardware nand chip and setup mtd info data struct */ if (nand_scan(mtd, 1)) { err = -ENXIO; - goto exit_error; + goto out_err_nand_scan; } /* add NAND partition */ @@ -781,11 +788,14 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "initialised ok\n"); return 0; -exit_error: - bf5xx_nand_remove(pdev); +out_err_nand_scan: + bf5xx_nand_dma_remove(info); +out_err_hw_init: + platform_set_drvdata(pdev, NULL); + kfree(info); +out_err_kzalloc: + peripheral_free_list(bfin_nfc_pin_req); - if (err == 0) - err = -EINVAL; return err; } -- cgit v1.2.3 From e4c094a595ba8ea402e6b2153f7bbf6ef039eea0 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 30 Jul 2008 12:35:04 -0700 Subject: [MTD] [NAND] drivers/mtd/nand/nandsim.c: fix printk warnings Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/nandsim.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 5d08514f553c..556e8131ecdc 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -586,7 +586,8 @@ static int init_nandsim(struct mtd_info *mtd) if (ns->busw == 16) NS_WARN("16-bit flashes support wasn't tested\n"); - printk("flash size: %llu MiB\n", ns->geom.totsz >> 20); + printk("flash size: %llu MiB\n", + (unsigned long long)ns->geom.totsz >> 20); printk("page size: %u bytes\n", ns->geom.pgsz); printk("OOB area size: %u bytes\n", ns->geom.oobsz); printk("sector size: %u KiB\n", ns->geom.secsz >> 10); @@ -595,8 +596,9 @@ static int init_nandsim(struct mtd_info *mtd) printk("bus width: %u\n", ns->busw); printk("bits in sector size: %u\n", ns->geom.secshift); printk("bits in page size: %u\n", ns->geom.pgshift); - printk("bits in OOB size: %u\n", ns->geom.oobshift); - printk("flash size with OOB: %llu KiB\n", ns->geom.totszoob >> 10); + printk("bits in OOB size: %u\n", ns->geom.oobshift); + printk("flash size with OOB: %llu KiB\n", + (unsigned long long)ns->geom.totszoob >> 10); printk("page address bytes: %u\n", ns->geom.pgaddrbytes); printk("sector address bytes: %u\n", ns->geom.secaddrbytes); printk("options: %#x\n", ns->options); -- cgit v1.2.3 From f418b006079ce537daf9436215f1d2a47e451602 Mon Sep 17 00:00:00 2001 From: Stephen Smalley Date: Mon, 28 Jul 2008 13:32:38 -0400 Subject: Re: BUG at security/selinux/avc.c:883 (was: Re: linux-next: Tree for July 17: early crash on x86-64) SELinux needs MAY_APPEND to be passed down to the security hook. Otherwise, we get permission denials when only append permission is granted by policy even if the opening process specified O_APPEND. Shows up as a regression in the ltp selinux testsuite, fixed by this patch. Signed-off-by: Stephen Smalley Signed-off-by: Al Viro --- fs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index a7b0a0b80128..b91e9732b24a 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -274,7 +274,7 @@ int inode_permission(struct inode *inode, int mask) return retval; return security_inode_permission(inode, - mask & (MAY_READ|MAY_WRITE|MAY_EXEC)); + mask & (MAY_READ|MAY_WRITE|MAY_EXEC|MAY_APPEND)); } /** -- cgit v1.2.3 From a1bc6eb4b499ae67ada9a01660010580b6569403 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 30 Jul 2008 06:32:52 -0400 Subject: [PATCH] ipv4_static_sysctl_init() should be under CONFIG_SYSCTL Signed-off-by: Al Viro --- net/ipv4/route.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 380d6474cf66..a72a5ad46ec5 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -3216,6 +3216,7 @@ int __init ip_rt_init(void) return rc; } +#ifdef CONFIG_SYSCTL /* * We really need to sanitize the damn ipv4 init order, then all * this nonsense will go away. @@ -3224,6 +3225,7 @@ void __init ip_static_sysctl_init(void) { register_sysctl_paths(ipv4_route_path, ipv4_route_table); } +#endif EXPORT_SYMBOL(__ip_select_ident); EXPORT_SYMBOL(ip_route_input); -- cgit v1.2.3 From 1027abe8827b47f7e9c4ed6514fde3d44f79963c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 30 Jul 2008 04:13:04 -0400 Subject: [PATCH] merge locate_fd() and get_unused_fd() New primitive: alloc_fd(start, flags). get_unused_fd() and get_unused_fd_flags() become wrappers on top of it. Signed-off-by: Al Viro --- fs/fcntl.c | 87 +++++++++------------------------------------------- fs/file.c | 61 ++++++++++++++++++++++++++++++++++++ fs/open.c | 56 --------------------------------- include/linux/file.h | 3 +- 4 files changed, 77 insertions(+), 130 deletions(-) diff --git a/fs/fcntl.c b/fs/fcntl.c index 61d625136813..2e40799daad6 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -49,73 +49,6 @@ static int get_close_on_exec(unsigned int fd) return res; } -/* - * locate_fd finds a free file descriptor in the open_fds fdset, - * expanding the fd arrays if necessary. Must be called with the - * file_lock held for write. - */ - -static int locate_fd(unsigned int orig_start, int cloexec) -{ - struct files_struct *files = current->files; - unsigned int newfd; - unsigned int start; - int error; - struct fdtable *fdt; - - spin_lock(&files->file_lock); -repeat: - fdt = files_fdtable(files); - /* - * Someone might have closed fd's in the range - * orig_start..fdt->next_fd - */ - start = orig_start; - if (start < files->next_fd) - start = files->next_fd; - - newfd = start; - if (start < fdt->max_fds) - newfd = find_next_zero_bit(fdt->open_fds->fds_bits, - fdt->max_fds, start); - - error = expand_files(files, newfd); - if (error < 0) - goto out; - - /* - * If we needed to expand the fs array we - * might have blocked - try again. - */ - if (error) - goto repeat; - - if (start <= files->next_fd) - files->next_fd = newfd + 1; - - FD_SET(newfd, fdt->open_fds); - if (cloexec) - FD_SET(newfd, fdt->close_on_exec); - else - FD_CLR(newfd, fdt->close_on_exec); - error = newfd; - -out: - spin_unlock(&files->file_lock); - return error; -} - -static int dupfd(struct file *file, unsigned int start, int cloexec) -{ - int fd = locate_fd(start, cloexec); - if (fd >= 0) - fd_install(fd, file); - else - fput(file); - - return fd; -} - asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags) { int err = -EBADF; @@ -194,10 +127,15 @@ asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd) asmlinkage long sys_dup(unsigned int fildes) { int ret = -EBADF; - struct file * file = fget(fildes); - - if (file) - ret = dupfd(file, 0, 0); + struct file *file = fget(fildes); + + if (file) { + ret = get_unused_fd(); + if (ret >= 0) + fd_install(ret, file); + else + fput(file); + } return ret; } @@ -322,8 +260,11 @@ static long do_fcntl(int fd, unsigned int cmd, unsigned long arg, case F_DUPFD_CLOEXEC: if (arg >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur) break; - get_file(filp); - err = dupfd(filp, arg, cmd == F_DUPFD_CLOEXEC); + err = alloc_fd(arg, cmd == F_DUPFD_CLOEXEC ? O_CLOEXEC : 0); + if (err >= 0) { + get_file(filp); + fd_install(err, filp); + } break; case F_GETFD: err = get_close_on_exec(fd) ? FD_CLOEXEC : 0; diff --git a/fs/file.c b/fs/file.c index d8773b19fe47..f313314f996f 100644 --- a/fs/file.c +++ b/fs/file.c @@ -6,6 +6,7 @@ * Manage the dynamic fd arrays in the process files_struct. */ +#include #include #include #include @@ -432,3 +433,63 @@ struct files_struct init_files = { }, .file_lock = __SPIN_LOCK_UNLOCKED(init_task.file_lock), }; + +/* + * allocate a file descriptor, mark it busy. + */ +int alloc_fd(unsigned start, unsigned flags) +{ + struct files_struct *files = current->files; + unsigned int fd; + int error; + struct fdtable *fdt; + + spin_lock(&files->file_lock); +repeat: + fdt = files_fdtable(files); + fd = start; + if (fd < files->next_fd) + fd = files->next_fd; + + if (fd < fdt->max_fds) + fd = find_next_zero_bit(fdt->open_fds->fds_bits, + fdt->max_fds, fd); + + error = expand_files(files, fd); + if (error < 0) + goto out; + + /* + * If we needed to expand the fs array we + * might have blocked - try again. + */ + if (error) + goto repeat; + + if (start <= files->next_fd) + files->next_fd = fd + 1; + + FD_SET(fd, fdt->open_fds); + if (flags & O_CLOEXEC) + FD_SET(fd, fdt->close_on_exec); + else + FD_CLR(fd, fdt->close_on_exec); + error = fd; +#if 1 + /* Sanity check */ + if (rcu_dereference(fdt->fd[fd]) != NULL) { + printk(KERN_WARNING "alloc_fd: slot %d not NULL!\n", fd); + rcu_assign_pointer(fdt->fd[fd], NULL); + } +#endif + +out: + spin_unlock(&files->file_lock); + return error; +} + +int get_unused_fd(void) +{ + return alloc_fd(0, 0); +} +EXPORT_SYMBOL(get_unused_fd); diff --git a/fs/open.c b/fs/open.c index 52647be277a2..07da9359481c 100644 --- a/fs/open.c +++ b/fs/open.c @@ -963,62 +963,6 @@ struct file *dentry_open(struct dentry *dentry, struct vfsmount *mnt, int flags) } EXPORT_SYMBOL(dentry_open); -/* - * Find an empty file descriptor entry, and mark it busy. - */ -int get_unused_fd_flags(int flags) -{ - struct files_struct * files = current->files; - int fd, error; - struct fdtable *fdt; - - spin_lock(&files->file_lock); - -repeat: - fdt = files_fdtable(files); - fd = find_next_zero_bit(fdt->open_fds->fds_bits, fdt->max_fds, - files->next_fd); - - /* Do we need to expand the fd array or fd set? */ - error = expand_files(files, fd); - if (error < 0) - goto out; - - if (error) { - /* - * If we needed to expand the fs array we - * might have blocked - try again. - */ - goto repeat; - } - - FD_SET(fd, fdt->open_fds); - if (flags & O_CLOEXEC) - FD_SET(fd, fdt->close_on_exec); - else - FD_CLR(fd, fdt->close_on_exec); - files->next_fd = fd + 1; -#if 1 - /* Sanity check */ - if (fdt->fd[fd] != NULL) { - printk(KERN_WARNING "get_unused_fd: slot %d not NULL!\n", fd); - fdt->fd[fd] = NULL; - } -#endif - error = fd; - -out: - spin_unlock(&files->file_lock); - return error; -} - -int get_unused_fd(void) -{ - return get_unused_fd_flags(0); -} - -EXPORT_SYMBOL(get_unused_fd); - static void __put_unused_fd(struct files_struct *files, unsigned int fd) { struct fdtable *fdt = files_fdtable(files); diff --git a/include/linux/file.h b/include/linux/file.h index 27c64bdc68c9..a20259e248a5 100644 --- a/include/linux/file.h +++ b/include/linux/file.h @@ -34,8 +34,9 @@ extern struct file *fget(unsigned int fd); extern struct file *fget_light(unsigned int fd, int *fput_needed); extern void set_close_on_exec(unsigned int fd, int flag); extern void put_filp(struct file *); +extern int alloc_fd(unsigned start, unsigned flags); extern int get_unused_fd(void); -extern int get_unused_fd_flags(int flags); +#define get_unused_fd_flags(flags) alloc_fd(0, (flags)) extern void put_unused_fd(unsigned int fd); extern void fd_install(unsigned int fd, struct file *file); -- cgit v1.2.3 From 1b7e190b4764ea3ca1080404dd593eae5230d2b3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 30 Jul 2008 06:18:03 -0400 Subject: [PATCH] clean dup2() up a bit Signed-off-by: Al Viro --- fs/fcntl.c | 53 +++++++++++++++++++++++++++-------------------------- 1 file changed, 27 insertions(+), 26 deletions(-) diff --git a/fs/fcntl.c b/fs/fcntl.c index 2e40799daad6..ac4f7db9f134 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -63,31 +63,35 @@ asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags) return -EINVAL; spin_lock(&files->file_lock); - if (!(file = fcheck(oldfd))) - goto out_unlock; - get_file(file); /* We are now finished with oldfd */ - err = expand_files(files, newfd); + file = fcheck(oldfd); + if (unlikely(!file)) + goto Ebadf; if (unlikely(err < 0)) { if (err == -EMFILE) - err = -EBADF; - goto out_fput; + goto Ebadf; + goto out_unlock; } - - /* To avoid races with open() and dup(), we will mark the fd as - * in-use in the open-file bitmap throughout the entire dup2() - * process. This is quite safe: do_close() uses the fd array - * entry, not the bitmap, to decide what work needs to be - * done. --sct */ - /* Doesn't work. open() might be there first. --AV */ - - /* Yes. It's a race. In user space. Nothing sane to do */ + /* + * We need to detect attempts to do dup2() over allocated but still + * not finished descriptor. NB: OpenBSD avoids that at the price of + * extra work in their equivalent of fget() - they insert struct + * file immediately after grabbing descriptor, mark it larval if + * more work (e.g. actual opening) is needed and make sure that + * fget() treats larval files as absent. Potentially interesting, + * but while extra work in fget() is trivial, locking implications + * and amount of surgery on open()-related paths in VFS are not. + * FreeBSD fails with -EBADF in the same situation, NetBSD "solution" + * deadlocks in rather amusing ways, AFAICS. All of that is out of + * scope of POSIX or SUS, since neither considers shared descriptor + * tables and this condition does not arise without those. + */ err = -EBUSY; fdt = files_fdtable(files); tofree = fdt->fd[newfd]; if (!tofree && FD_ISSET(newfd, fdt->open_fds)) - goto out_fput; - + goto out_unlock; + get_file(file); rcu_assign_pointer(fdt->fd[newfd], file); FD_SET(newfd, fdt->open_fds); if (flags & O_CLOEXEC) @@ -98,17 +102,14 @@ asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags) if (tofree) filp_close(tofree, files); - err = newfd; -out: - return err; -out_unlock: - spin_unlock(&files->file_lock); - goto out; -out_fput: + return newfd; + +Ebadf: + err = -EBADF; +out_unlock: spin_unlock(&files->file_lock); - fput(file); - goto out; + return err; } asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd) -- cgit v1.2.3 From 77e69dac3cefacee939cb107ae9cd520a62338e0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 1 Aug 2008 04:29:18 -0400 Subject: [PATCH] fix races and leaks in vfs_quota_on() users * new helper: vfs_quota_on_path(); equivalent of vfs_quota_on() sans the pathname resolution. * callers of vfs_quota_on() that do their own pathname resolution and checks based on it are switched to vfs_quota_on_path(); that way we avoid the races. * reiserfs leaked dentry/vfsmount references on several failure exits. Signed-off-by: Al Viro --- fs/dquot.c | 33 ++++++++++++++++++++------------- fs/ext3/super.c | 3 ++- fs/ext4/super.c | 3 ++- fs/reiserfs/super.c | 16 +++++++++------- include/linux/quotaops.h | 2 ++ 5 files changed, 35 insertions(+), 22 deletions(-) diff --git a/fs/dquot.c b/fs/dquot.c index 1346eebe74ce..8ec4d6cc7633 100644 --- a/fs/dquot.c +++ b/fs/dquot.c @@ -1793,6 +1793,21 @@ static int vfs_quota_on_remount(struct super_block *sb, int type) return ret; } +int vfs_quota_on_path(struct super_block *sb, int type, int format_id, + struct path *path) +{ + int error = security_quota_on(path->dentry); + if (error) + return error; + /* Quota file not on the same filesystem? */ + if (path->mnt->mnt_sb != sb) + error = -EXDEV; + else + error = vfs_quota_on_inode(path->dentry->d_inode, type, + format_id); + return error; +} + /* Actual function called from quotactl() */ int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path, int remount) @@ -1804,19 +1819,10 @@ int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path, return vfs_quota_on_remount(sb, type); error = path_lookup(path, LOOKUP_FOLLOW, &nd); - if (error < 0) - return error; - error = security_quota_on(nd.path.dentry); - if (error) - goto out_path; - /* Quota file not on the same filesystem? */ - if (nd.path.mnt->mnt_sb != sb) - error = -EXDEV; - else - error = vfs_quota_on_inode(nd.path.dentry->d_inode, type, - format_id); -out_path: - path_put(&nd.path); + if (!error) { + error = vfs_quota_on_path(sb, type, format_id, &nd.path); + path_put(&nd.path); + } return error; } @@ -2185,6 +2191,7 @@ EXPORT_SYMBOL(unregister_quota_format); EXPORT_SYMBOL(dqstats); EXPORT_SYMBOL(dq_data_lock); EXPORT_SYMBOL(vfs_quota_on); +EXPORT_SYMBOL(vfs_quota_on_path); EXPORT_SYMBOL(vfs_quota_on_mount); EXPORT_SYMBOL(vfs_quota_off); EXPORT_SYMBOL(vfs_quota_sync); diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 8ddced384674..f38a5afc39a1 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -2810,8 +2810,9 @@ static int ext3_quota_on(struct super_block *sb, int type, int format_id, journal_unlock_updates(EXT3_SB(sb)->s_journal); } + err = vfs_quota_on_path(sb, type, format_id, &nd.path); path_put(&nd.path); - return vfs_quota_on(sb, type, format_id, path, remount); + return err; } /* Read data from quotafile - avoid pagecache and such because we cannot afford diff --git a/fs/ext4/super.c b/fs/ext4/super.c index b5479b1dff14..1e69f29a8c55 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3352,8 +3352,9 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id, jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal); } + err = vfs_quota_on_path(sb, type, format_id, &nd.path); path_put(&nd.path); - return vfs_quota_on(sb, type, format_id, path, remount); + return err; } /* Read data from quotafile - avoid pagecache and such because we cannot afford diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index 879e54d35c2d..282a13596c70 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -2076,8 +2076,8 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id, return err; /* Quotafile not on the same filesystem? */ if (nd.path.mnt->mnt_sb != sb) { - path_put(&nd.path); - return -EXDEV; + err = -EXDEV; + goto out; } inode = nd.path.dentry->d_inode; /* We must not pack tails for quota files on reiserfs for quota IO to work */ @@ -2087,8 +2087,8 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id, reiserfs_warning(sb, "reiserfs: Unpacking tail of quota file failed" " (%d). Cannot turn on quotas.", err); - path_put(&nd.path); - return -EINVAL; + err = -EINVAL; + goto out; } mark_inode_dirty(inode); } @@ -2109,13 +2109,15 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id, /* Just start temporary transaction and finish it */ err = journal_begin(&th, sb, 1); if (err) - return err; + goto out; err = journal_end_sync(&th, sb, 1); if (err) - return err; + goto out; } + err = vfs_quota_on_path(sb, type, format_id, &nd.path); +out: path_put(&nd.path); - return vfs_quota_on(sb, type, format_id, path, 0); + return err; } /* Read data from quotafile - avoid pagecache and such because we cannot afford diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index 742187f7a05c..ca6b9b5c8d52 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -43,6 +43,8 @@ int dquot_mark_dquot_dirty(struct dquot *dquot); int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path, int remount); +int vfs_quota_on_path(struct super_block *sb, int type, int format_id, + struct path *path); int vfs_quota_on_mount(struct super_block *sb, char *qf_name, int format_id, int type); int vfs_quota_off(struct super_block *sb, int type, int remount); -- cgit v1.2.3 From 8266602033d6adc6d10cb8811c1fd694767909b0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 1 Aug 2008 05:32:04 -0400 Subject: [PATCH] fix bdev leak in block_dev.c do_open() Callers expect it to drop reference to bdev on all failure exits. Signed-off-by: Al Viro --- fs/block_dev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/block_dev.c b/fs/block_dev.c index dcf37cada369..e664b0b70489 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -941,8 +941,10 @@ static int do_open(struct block_device *bdev, struct file *file, int for_part) * hooks: /n/, see "layering violations". */ ret = devcgroup_inode_permission(bdev->bd_inode, perm); - if (ret != 0) + if (ret != 0) { + bdput(bdev); return ret; + } ret = -ENXIO; file->f_mapping = bdev->bd_inode->i_mapping; -- cgit v1.2.3 From 67935df49dae836fa86621861979fafdfd37ae59 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 26 Jul 2008 11:18:28 +0400 Subject: [PATCH 1/2] proc: fix inode number bogorithmetic Id which proc gets from IDR for inode number and id which proc removes from IDR do not match. E.g. 0x11a transforms into 0x8000011a. Which stayed unnoticed for a long time because, surprise, idr_remove() masks out that high bit before doing anything. All of this due to "| ~MAX_ID_MASK" in release_inode_number(). I still don't understand how it's supposed to work, because "| ~MASK" is not an inversion for "& MAX" operation. So, use just one nice, working addition. Make start offset unsigned int, while I'm at it. It's longness is not used anywhere. Signed-off-by: Alexey Dobriyan Signed-off-by: Al Viro --- fs/proc/generic.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/fs/proc/generic.c b/fs/proc/generic.c index cb4096cc3fb7..b85e36e153ba 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -303,7 +303,7 @@ out: static DEFINE_IDR(proc_inum_idr); static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */ -#define PROC_DYNAMIC_FIRST 0xF0000000UL +#define PROC_DYNAMIC_FIRST 0xF0000000U /* * Return an inode number between PROC_DYNAMIC_FIRST and @@ -311,7 +311,7 @@ static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */ */ static unsigned int get_inode_number(void) { - int i, inum = 0; + unsigned int i; int error; retry: @@ -326,21 +326,18 @@ retry: else if (error) return 0; - inum = (i & MAX_ID_MASK) + PROC_DYNAMIC_FIRST; - - /* inum will never be more than 0xf0ffffff, so no check - * for overflow. - */ - - return inum; + if (i > UINT_MAX - PROC_DYNAMIC_FIRST) { + spin_lock(&proc_inum_lock); + idr_remove(&proc_inum_idr, i); + spin_unlock(&proc_inum_lock); + } + return PROC_DYNAMIC_FIRST + i; } static void release_inode_number(unsigned int inum) { - int id = (inum - PROC_DYNAMIC_FIRST) | ~MAX_ID_MASK; - spin_lock(&proc_inum_lock); - idr_remove(&proc_inum_idr, id); + idr_remove(&proc_inum_idr, inum - PROC_DYNAMIC_FIRST); spin_unlock(&proc_inum_lock); } -- cgit v1.2.3 From 9a18540915faaaadd7f71c16fa877a0c19675923 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 26 Jul 2008 11:21:37 +0400 Subject: [PATCH 2/2] proc: switch inode number allocation to IDA proc doesn't use "associate pointer with id" feature of IDR, so switch to IDA. NOTE, NOTE, NOTE: Do not apply if release_inode_number() still mantions MAX_ID_MASK! Signed-off-by: Alexey Dobriyan Signed-off-by: Al Viro --- fs/proc/generic.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/proc/generic.c b/fs/proc/generic.c index b85e36e153ba..4fb81e9c94e3 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -300,7 +300,7 @@ out: return rtn; } -static DEFINE_IDR(proc_inum_idr); +static DEFINE_IDA(proc_inum_ida); static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */ #define PROC_DYNAMIC_FIRST 0xF0000000U @@ -315,11 +315,11 @@ static unsigned int get_inode_number(void) int error; retry: - if (idr_pre_get(&proc_inum_idr, GFP_KERNEL) == 0) + if (ida_pre_get(&proc_inum_ida, GFP_KERNEL) == 0) return 0; spin_lock(&proc_inum_lock); - error = idr_get_new(&proc_inum_idr, NULL, &i); + error = ida_get_new(&proc_inum_ida, &i); spin_unlock(&proc_inum_lock); if (error == -EAGAIN) goto retry; @@ -328,7 +328,7 @@ retry: if (i > UINT_MAX - PROC_DYNAMIC_FIRST) { spin_lock(&proc_inum_lock); - idr_remove(&proc_inum_idr, i); + ida_remove(&proc_inum_ida, i); spin_unlock(&proc_inum_lock); } return PROC_DYNAMIC_FIRST + i; @@ -337,7 +337,7 @@ retry: static void release_inode_number(unsigned int inum) { spin_lock(&proc_inum_lock); - idr_remove(&proc_inum_idr, inum - PROC_DYNAMIC_FIRST); + ida_remove(&proc_inum_ida, inum - PROC_DYNAMIC_FIRST); spin_unlock(&proc_inum_lock); } -- cgit v1.2.3 From 7ee7c12b7121cd49d528de219e4ffd5459657998 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 26 Jul 2008 11:42:16 +0400 Subject: [PATCH] devpts: switch to IDA Devpts code wants just numbers for tty indexes. Signed-off-by: Alexey Dobriyan Signed-off-by: Al Viro --- fs/devpts/inode.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c index 285b64a8b06e..488eb424f662 100644 --- a/fs/devpts/inode.c +++ b/fs/devpts/inode.c @@ -29,7 +29,7 @@ #define DEVPTS_DEFAULT_MODE 0600 extern int pty_limit; /* Config limit on Unix98 ptys */ -static DEFINE_IDR(allocated_ptys); +static DEFINE_IDA(allocated_ptys); static DEFINE_MUTEX(allocated_ptys_lock); static struct vfsmount *devpts_mnt; @@ -180,24 +180,24 @@ static struct dentry *get_node(int num) int devpts_new_index(void) { int index; - int idr_ret; + int ida_ret; retry: - if (!idr_pre_get(&allocated_ptys, GFP_KERNEL)) { + if (!ida_pre_get(&allocated_ptys, GFP_KERNEL)) { return -ENOMEM; } mutex_lock(&allocated_ptys_lock); - idr_ret = idr_get_new(&allocated_ptys, NULL, &index); - if (idr_ret < 0) { + ida_ret = ida_get_new(&allocated_ptys, &index); + if (ida_ret < 0) { mutex_unlock(&allocated_ptys_lock); - if (idr_ret == -EAGAIN) + if (ida_ret == -EAGAIN) goto retry; return -EIO; } if (index >= pty_limit) { - idr_remove(&allocated_ptys, index); + ida_remove(&allocated_ptys, index); mutex_unlock(&allocated_ptys_lock); return -EIO; } @@ -208,7 +208,7 @@ retry: void devpts_kill_index(int idx) { mutex_lock(&allocated_ptys_lock); - idr_remove(&allocated_ptys, idx); + ida_remove(&allocated_ptys, idx); mutex_unlock(&allocated_ptys_lock); } -- cgit v1.2.3 From a95164d979c5ca061f15bcaadc829c146693d4d9 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 30 Jul 2008 15:08:48 +0200 Subject: [patch 3/4] vfs: remove unused nameidata argument of may_create() Signed-off-by: Miklos Szeredi Signed-off-by: Al Viro --- fs/namei.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index b91e9732b24a..4ea63ed5e791 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1431,8 +1431,7 @@ static int may_delete(struct inode *dir,struct dentry *victim,int isdir) * 3. We should have write and exec permissions on dir * 4. We can't do it if dir is immutable (done in permission()) */ -static inline int may_create(struct inode *dir, struct dentry *child, - struct nameidata *nd) +static inline int may_create(struct inode *dir, struct dentry *child) { if (child->d_inode) return -EEXIST; @@ -1504,7 +1503,7 @@ void unlock_rename(struct dentry *p1, struct dentry *p2) int vfs_create(struct inode *dir, struct dentry *dentry, int mode, struct nameidata *nd) { - int error = may_create(dir, dentry, nd); + int error = may_create(dir, dentry); if (error) return error; @@ -1948,7 +1947,7 @@ EXPORT_SYMBOL_GPL(lookup_create); int vfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev) { - int error = may_create(dir, dentry, NULL); + int error = may_create(dir, dentry); if (error) return error; @@ -2049,7 +2048,7 @@ asmlinkage long sys_mknod(const char __user *filename, int mode, unsigned dev) int vfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) { - int error = may_create(dir, dentry, NULL); + int error = may_create(dir, dentry); if (error) return error; @@ -2316,7 +2315,7 @@ asmlinkage long sys_unlink(const char __user *pathname) int vfs_symlink(struct inode *dir, struct dentry *dentry, const char *oldname) { - int error = may_create(dir, dentry, NULL); + int error = may_create(dir, dentry); if (error) return error; @@ -2386,7 +2385,7 @@ int vfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_de if (!inode) return -ENOENT; - error = may_create(dir, new_dentry, NULL); + error = may_create(dir, new_dentry); if (error) return error; @@ -2595,7 +2594,7 @@ int vfs_rename(struct inode *old_dir, struct dentry *old_dentry, return error; if (!new_dentry->d_inode) - error = may_create(new_dir, new_dentry, NULL); + error = may_create(new_dir, new_dentry); else error = may_delete(new_dir, new_dentry, is_dir); if (error) -- cgit v1.2.3 From d5686b444ff3f72808d2b3fbd58672a86cdf38e7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 1 Aug 2008 05:00:11 -0400 Subject: [PATCH] switch mtd and dm-table to lookup_bdev() No need to open-code it... Signed-off-by: Al Viro --- drivers/md/dm-table.c | 29 ++++++----------------------- drivers/mtd/mtdsuper.c | 33 +++++++++++---------------------- fs/block_dev.c | 1 + 3 files changed, 18 insertions(+), 45 deletions(-) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 798e468103b8..61f441409234 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -316,29 +316,12 @@ static inline int check_space(struct dm_table *t) */ static int lookup_device(const char *path, dev_t *dev) { - int r; - struct nameidata nd; - struct inode *inode; - - if ((r = path_lookup(path, LOOKUP_FOLLOW, &nd))) - return r; - - inode = nd.path.dentry->d_inode; - if (!inode) { - r = -ENOENT; - goto out; - } - - if (!S_ISBLK(inode->i_mode)) { - r = -ENOTBLK; - goto out; - } - - *dev = inode->i_rdev; - - out: - path_put(&nd.path); - return r; + struct block_device *bdev = lookup_bdev(path); + if (IS_ERR(bdev)) + return PTR_ERR(bdev); + *dev = bdev->bd_dev; + bdput(bdev); + return 0; } /* diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c index 28cc6787a800..9b6af7e74a65 100644 --- a/drivers/mtd/mtdsuper.c +++ b/drivers/mtd/mtdsuper.c @@ -125,7 +125,7 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags, int (*fill_super)(struct super_block *, void *, int), struct vfsmount *mnt) { - struct nameidata nd; + struct block_device *bdev; int mtdnr, ret; if (!dev_name) @@ -181,29 +181,20 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags, /* try the old way - the hack where we allowed users to mount * /dev/mtdblock$(n) but didn't actually _use_ the blockdev */ - ret = path_lookup(dev_name, LOOKUP_FOLLOW, &nd); - - DEBUG(1, "MTDSB: path_lookup() returned %d, inode %p\n", - ret, nd.path.dentry ? nd.path.dentry->d_inode : NULL); - - if (ret) + bdev = lookup_bdev(dev_name); + if (IS_ERR(bdev)) { + ret = PTR_ERR(bdev); + DEBUG(1, "MTDSB: lookup_bdev() returned %d\n", ret); return ret; - - ret = -EINVAL; - - if (!S_ISBLK(nd.path.dentry->d_inode->i_mode)) - goto out; - - if (nd.path.mnt->mnt_flags & MNT_NODEV) { - ret = -EACCES; - goto out; } + DEBUG(1, "MTDSB: lookup_bdev() returned 0\n"); - if (imajor(nd.path.dentry->d_inode) != MTD_BLOCK_MAJOR) + ret = -EINVAL; + if (MAJOR(bdev->bd_dev) != MTD_BLOCK_MAJOR) goto not_an_MTD_device; - mtdnr = iminor(nd.path.dentry->d_inode); - path_put(&nd.path); + mtdnr = MINOR(bdev->bd_dev); + bdput(bdev); return get_sb_mtd_nr(fs_type, flags, dev_name, data, mtdnr, fill_super, mnt); @@ -213,10 +204,8 @@ not_an_MTD_device: printk(KERN_NOTICE "MTD: Attempt to mount non-MTD device \"%s\"\n", dev_name); -out: - path_put(&nd.path); + bdput(bdev); return ret; - } EXPORT_SYMBOL_GPL(get_sb_mtd); diff --git a/fs/block_dev.c b/fs/block_dev.c index e664b0b70489..aff54219e049 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -1236,6 +1236,7 @@ fail: bdev = ERR_PTR(error); goto out; } +EXPORT_SYMBOL(lookup_bdev); /** * open_bdev_excl - open a block device by name and set it up for use -- cgit v1.2.3 From 8d66bf5481002b0960aa49aed0987c73f5d7816c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 1 Aug 2008 09:05:54 -0400 Subject: [PATCH] pass struct path * to do_add_mount() Signed-off-by: Al Viro --- fs/afs/mntpt.c | 2 +- fs/cifs/cifs_dfs_ref.c | 2 +- fs/namespace.c | 16 ++++++++-------- fs/nfs/namespace.c | 2 +- include/linux/mount.h | 3 ++- 5 files changed, 13 insertions(+), 12 deletions(-) diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c index 2f5503902c37..78db4953a800 100644 --- a/fs/afs/mntpt.c +++ b/fs/afs/mntpt.c @@ -232,7 +232,7 @@ static void *afs_mntpt_follow_link(struct dentry *dentry, struct nameidata *nd) } mntget(newmnt); - err = do_add_mount(newmnt, nd, MNT_SHRINKABLE, &afs_vfsmounts); + err = do_add_mount(newmnt, &nd->path, MNT_SHRINKABLE, &afs_vfsmounts); switch (err) { case 0: path_put(&nd->path); diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index d82374c9e329..d2c8eef84f3c 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -226,7 +226,7 @@ static int add_mount_helper(struct vfsmount *newmnt, struct nameidata *nd, int err; mntget(newmnt); - err = do_add_mount(newmnt, nd, nd->path.mnt->mnt_flags, mntlist); + err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags, mntlist); switch (err) { case 0: path_put(&nd->path); diff --git a/fs/namespace.c b/fs/namespace.c index 411728c0c8bb..6e283c93b50d 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1667,31 +1667,31 @@ static noinline int do_new_mount(struct nameidata *nd, char *type, int flags, if (IS_ERR(mnt)) return PTR_ERR(mnt); - return do_add_mount(mnt, nd, mnt_flags, NULL); + return do_add_mount(mnt, &nd->path, mnt_flags, NULL); } /* * add a mount into a namespace's mount tree * - provide the option of adding the new mount to an expiration list */ -int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd, +int do_add_mount(struct vfsmount *newmnt, struct path *path, int mnt_flags, struct list_head *fslist) { int err; down_write(&namespace_sem); /* Something was mounted here while we slept */ - while (d_mountpoint(nd->path.dentry) && - follow_down(&nd->path.mnt, &nd->path.dentry)) + while (d_mountpoint(path->dentry) && + follow_down(&path->mnt, &path->dentry)) ; err = -EINVAL; - if (!check_mnt(nd->path.mnt)) + if (!check_mnt(path->mnt)) goto unlock; /* Refuse the same filesystem on the same mount point */ err = -EBUSY; - if (nd->path.mnt->mnt_sb == newmnt->mnt_sb && - nd->path.mnt->mnt_root == nd->path.dentry) + if (path->mnt->mnt_sb == newmnt->mnt_sb && + path->mnt->mnt_root == path->dentry) goto unlock; err = -EINVAL; @@ -1699,7 +1699,7 @@ int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd, goto unlock; newmnt->mnt_flags = mnt_flags; - if ((err = graft_tree(newmnt, &nd->path))) + if ((err = graft_tree(newmnt, path))) goto unlock; if (fslist) /* add to the specified expiration list */ diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c index 2f285ef76399..66df08dd1caf 100644 --- a/fs/nfs/namespace.c +++ b/fs/nfs/namespace.c @@ -129,7 +129,7 @@ static void * nfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd) goto out_err; mntget(mnt); - err = do_add_mount(mnt, nd, nd->path.mnt->mnt_flags|MNT_SHRINKABLE, + err = do_add_mount(mnt, &nd->path, nd->path.mnt->mnt_flags|MNT_SHRINKABLE, &nfs_automount_list); if (err < 0) { mntput(mnt); diff --git a/include/linux/mount.h b/include/linux/mount.h index b5efaa2132ab..30a1d63b6fb5 100644 --- a/include/linux/mount.h +++ b/include/linux/mount.h @@ -105,7 +105,8 @@ extern struct vfsmount *vfs_kern_mount(struct file_system_type *type, struct nameidata; -extern int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd, +struct path; +extern int do_add_mount(struct vfsmount *newmnt, struct path *path, int mnt_flags, struct list_head *fslist); extern void mark_mounts_for_expiry(struct list_head *mounts); -- cgit v1.2.3 From ee1d315663ee0b494898f813a266d6244b263b4f Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Mon, 7 Jul 2008 10:49:45 -0400 Subject: [PATCH] Audit: Collect signal info when SIGUSR2 is sent to auditd Makes the kernel audit subsystem collect information about the sending process when that process sends SIGUSR2 to the userspace audit daemon. SIGUSR2 is a new interesting signal to auditd telling auditd that it should try to start logging to disk again and the error condition which caused it to stop logging to disk (usually out of space) has been rectified. Signed-off-by: Eric Paris Signed-off-by: Al Viro --- kernel/auditsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 4699950e65bd..580a5389fd99 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -2375,7 +2375,7 @@ int __audit_signal_info(int sig, struct task_struct *t) struct audit_context *ctx = tsk->audit_context; if (audit_pid && t->tgid == audit_pid) { - if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1) { + if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1 || sig == SIGUSR2) { audit_sig_pid = tsk->pid; if (tsk->loginuid != -1) audit_sig_uid = tsk->loginuid; -- cgit v1.2.3 From 1d6c9649e236caa2e93e3647256216e57172b011 Mon Sep 17 00:00:00 2001 From: Vesa-Matti J Kari Date: Wed, 23 Jul 2008 00:06:13 +0300 Subject: kernel/audit.c control character detection is off-by-one Hello, According to my understanding there is an off-by-one bug in the function: audit_string_contains_control() in: kernel/audit.c Patch is included. I do not know from how many places the function is called from, but for example, SELinux Access Vector Cache tries to log untrusted filenames via call path: avc_audit() audit_log_untrustedstring() audit_log_n_untrustedstring() audit_string_contains_control() If audit_string_contains_control() detects control characters, then the string is hex-encoded. But the hex=0x7f dec=127, DEL-character, is not detected. I guess this could have at least some minor security implications, since a user can create a filename with 0x7f in it, causing logged filename to possibly look different when someone reads it on the terminal. Signed-off-by: Vesa-Matti Kari Signed-off-by: Al Viro --- kernel/audit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/audit.c b/kernel/audit.c index e092f1c0ce30..6d903182c6b7 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -1366,7 +1366,7 @@ int audit_string_contains_control(const char *string, size_t len) { const unsigned char *p; for (p = string; p < (const unsigned char *)string + len && *p; p++) { - if (*p == '"' || *p < 0x21 || *p > 0x7f) + if (*p == '"' || *p < 0x21 || *p > 0x7e) return 1; } return 0; -- cgit v1.2.3 From 036bbf76ad9f83781590623111b80ba0b82930ac Mon Sep 17 00:00:00 2001 From: zhangxiliang Date: Fri, 1 Aug 2008 09:47:01 +0800 Subject: Re: [PATCH] the loginuid field should be output in all AUDIT_CONFIG_CHANGE audit messages > shouldn't these be using the "audit_get_loginuid(current)" and if we > are going to output loginuid we also should be outputting sessionid Thanks for your detailed explanation. I have made a new patch for outputing "loginuid" and "sessionid" by audit_get_loginuid(current) and audit_get_sessionid(current). If there are some deficiencies, please give me your indication. Signed-off-by: Zhang Xiliang Signed-off-by: Al Viro --- kernel/auditfilter.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index 98c50cc671bb..b7d354e2b0ef 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1022,8 +1022,11 @@ static void audit_update_watch(struct audit_parent *parent, struct audit_buffer *ab; ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE); + audit_log_format(ab, "auid=%u ses=%u", + audit_get_loginuid(current), + audit_get_sessionid(current)); audit_log_format(ab, - "op=updated rules specifying path="); + " op=updated rules specifying path="); audit_log_untrustedstring(ab, owatch->path); audit_log_format(ab, " with dev=%u ino=%lu\n", dev, ino); @@ -1058,7 +1061,10 @@ static void audit_remove_parent_watches(struct audit_parent *parent) struct audit_buffer *ab; ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE); - audit_log_format(ab, "op=remove rule path="); + audit_log_format(ab, "auid=%u ses=%u", + audit_get_loginuid(current), + audit_get_sessionid(current)); + audit_log_format(ab, " op=remove rule path="); audit_log_untrustedstring(ab, w->path); if (r->filterkey) { audit_log_format(ab, " key="); -- cgit v1.2.3 From 980dfb0db340b95094732d78b55311f2c539c1af Mon Sep 17 00:00:00 2001 From: zhangxiliang Date: Fri, 1 Aug 2008 19:15:47 +0800 Subject: [PATCH] Fix the kernel panic of audit_filter_task when key field is set When calling audit_filter_task(), it calls audit_filter_rules() with audit_context is NULL. If the key field is set, the result in audit_filter_rules() will be set to 1 and ctx->filterkey will be set to key. But the ctx is NULL in this condition, so kernel will panic. Signed-off-by: Zhang Xiliang Signed-off-by: Al Viro --- kernel/auditsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 580a5389fd99..496c3dd37276 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -610,7 +610,7 @@ static int audit_filter_rules(struct task_struct *tsk, if (!result) return 0; } - if (rule->filterkey) + if (rule->filterkey && ctx) ctx->filterkey = kstrdup(rule->filterkey, GFP_ATOMIC); switch (rule->action) { case AUDIT_NEVER: *state = AUDIT_DISABLED; break; -- cgit v1.2.3 From 20c6aaa39ab735c7ed78e4e5a214d250efae0a6e Mon Sep 17 00:00:00 2001 From: zhangxiliang Date: Thu, 31 Jul 2008 10:11:19 +0800 Subject: [PATCH] Fix the bug of using AUDIT_STATUS_RATE_LIMIT when set fail, no error output. When the "status_get->mask" is "AUDIT_STATUS_RATE_LIMIT || AUDIT_STATUS_BACKLOG_LIMIT". If "audit_set_rate_limit" fails and "audit_set_backlog_limit" succeeds, the "err" value will be greater than or equal to 0. It will miss the failure of rate set. Signed-off-by: Zhang Xiliang Acked-by: Eric Paris Signed-off-by: Al Viro --- kernel/audit.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/kernel/audit.c b/kernel/audit.c index 6d903182c6b7..4414e93d8750 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -707,12 +707,14 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) if (status_get->mask & AUDIT_STATUS_ENABLED) { err = audit_set_enabled(status_get->enabled, loginuid, sessionid, sid); - if (err < 0) return err; + if (err < 0) + return err; } if (status_get->mask & AUDIT_STATUS_FAILURE) { err = audit_set_failure(status_get->failure, loginuid, sessionid, sid); - if (err < 0) return err; + if (err < 0) + return err; } if (status_get->mask & AUDIT_STATUS_PID) { int new_pid = status_get->pid; @@ -725,9 +727,12 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) audit_pid = new_pid; audit_nlk_pid = NETLINK_CB(skb).pid; } - if (status_get->mask & AUDIT_STATUS_RATE_LIMIT) + if (status_get->mask & AUDIT_STATUS_RATE_LIMIT) { err = audit_set_rate_limit(status_get->rate_limit, loginuid, sessionid, sid); + if (err < 0) + return err; + } if (status_get->mask & AUDIT_STATUS_BACKLOG_LIMIT) err = audit_set_backlog_limit(status_get->backlog_limit, loginuid, sessionid, sid); -- cgit v1.2.3 From 4a3cba32cb514168bb2516c045b178e6660421d1 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 29 Jul 2008 00:11:16 +0200 Subject: sdhci: handle bug in JMB38x for sizes < 4 bytes Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci-pci.c | 3 ++- drivers/mmc/host/sdhci.c | 9 +++++++++ drivers/mmc/host/sdhci.h | 2 ++ 3 files changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index deb607c52c0d..fcb14c2346cc 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -143,7 +143,8 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE | SDHCI_QUIRK_32BIT_ADMA_SIZE | - SDHCI_QUIRK_RESET_AFTER_REQUEST; + SDHCI_QUIRK_RESET_AFTER_REQUEST | + SDHCI_QUIRK_BROKEN_SMALL_PIO; } /* diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 5f95e10229b5..be09739f692d 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -278,6 +278,15 @@ static void sdhci_transfer_pio(struct sdhci_host *host) else mask = SDHCI_SPACE_AVAILABLE; + /* + * Some controllers (JMicron JMB38x) mess up the buffer bits + * for transfers < 4 bytes. As long as it is just one block, + * we can ignore the bits. + */ + if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) && + (host->data->blocks == 1)) + mask = ~0; + while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) { if (host->data->flags & MMC_DATA_READ) sdhci_read_block_pio(host); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index e354faee5df0..197d4a05f4ae 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -206,6 +206,8 @@ struct sdhci_host { #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11) /* Controller provides an incorrect timeout value for transfers */ #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) +/* Controller has an issue with buffer bits for small transfers */ +#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */ -- cgit v1.2.3 From ebd6d357848edb8709dd9bed4b93834d1b4d7044 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 29 Jul 2008 00:45:51 +0200 Subject: sdhci: disable DMA for req, not completely The wrong flag was manipulated when an invalid sg list was given, turning off DMA on the next (and all subsequent) request instead of the current one. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index be09739f692d..9191aaf2e52c 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -654,7 +654,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) * us an invalid request. */ WARN_ON(1); - host->flags &= ~SDHCI_USE_DMA; + host->flags &= ~SDHCI_REQ_USE_DMA; } else { writel(host->adma_addr, host->ioaddr + SDHCI_ADMA_ADDRESS); @@ -673,7 +673,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) * us an invalid request. */ WARN_ON(1); - host->flags &= ~SDHCI_USE_DMA; + host->flags &= ~SDHCI_REQ_USE_DMA; } else { WARN_ON(sg_cnt != 1); writel(sg_dma_address(data->sg), -- cgit v1.2.3 From 980167b7fb20fb181766218b4771fc7420a7bbb4 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 29 Jul 2008 00:53:20 +0200 Subject: sdhci: check correct return value Fix a copy-and-paste error. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 9191aaf2e52c..e3a8133560a2 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -448,7 +448,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host, host->adma_addr = dma_map_single(mmc_dev(host->mmc), host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE); - if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr)) + if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr)) goto unmap_entries; BUG_ON(host->adma_addr & 0x3); -- cgit v1.2.3 From b7ac2cf1cdf346b34cbc2104d386a9d29d12aa4c Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 29 Jul 2008 01:05:22 +0200 Subject: mmc_test: Revert "mmc_test: test oversized sg lists" This reverts commit 48b5352ea1891455eb8e824cf7d92f66931a090f. Oversized sg lists are not allowed anymore, and the core even checks for them in debug mode, so this test is entirely incorrect. Signed-off-by: Pierre Ossman --- drivers/mmc/card/mmc_test.c | 85 ++------------------------------------------- 1 file changed, 3 insertions(+), 82 deletions(-) diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index a067fe436301..f26b01d811ae 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -388,16 +388,14 @@ static int mmc_test_transfer(struct mmc_test_card *test, int ret, i; unsigned long flags; - BUG_ON(blocks * blksz > BUFFER_SIZE); - if (write) { for (i = 0;i < blocks * blksz;i++) test->scratch[i] = i; } else { - memset(test->scratch, 0, blocks * blksz); + memset(test->scratch, 0, BUFFER_SIZE); } local_irq_save(flags); - sg_copy_from_buffer(sg, sg_len, test->scratch, blocks * blksz); + sg_copy_from_buffer(sg, sg_len, test->scratch, BUFFER_SIZE); local_irq_restore(flags); ret = mmc_test_set_blksize(test, blksz); @@ -444,7 +442,7 @@ static int mmc_test_transfer(struct mmc_test_card *test, } } else { local_irq_save(flags); - sg_copy_to_buffer(sg, sg_len, test->scratch, blocks * blksz); + sg_copy_to_buffer(sg, sg_len, test->scratch, BUFFER_SIZE); local_irq_restore(flags); for (i = 0;i < blocks * blksz;i++) { if (test->scratch[i] != (u8)i) @@ -805,69 +803,6 @@ static int mmc_test_multi_xfersize_read(struct mmc_test_card *test) return 0; } -static int mmc_test_bigsg_write(struct mmc_test_card *test) -{ - int ret; - unsigned int size; - struct scatterlist sg; - - if (test->card->host->max_blk_count == 1) - return RESULT_UNSUP_HOST; - - size = PAGE_SIZE * 2; - size = min(size, test->card->host->max_req_size); - size = min(size, test->card->host->max_seg_size); - size = min(size, test->card->host->max_blk_count * 512); - - memset(test->buffer, 0, BUFFER_SIZE); - - if (size < 1024) - return RESULT_UNSUP_HOST; - - sg_init_table(&sg, 1); - sg_init_one(&sg, test->buffer, BUFFER_SIZE); - - ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1); - if (ret) - return ret; - - return 0; -} - -static int mmc_test_bigsg_read(struct mmc_test_card *test) -{ - int ret, i; - unsigned int size; - struct scatterlist sg; - - if (test->card->host->max_blk_count == 1) - return RESULT_UNSUP_HOST; - - size = PAGE_SIZE * 2; - size = min(size, test->card->host->max_req_size); - size = min(size, test->card->host->max_seg_size); - size = min(size, test->card->host->max_blk_count * 512); - - if (size < 1024) - return RESULT_UNSUP_HOST; - - memset(test->buffer, 0xCD, BUFFER_SIZE); - - sg_init_table(&sg, 1); - sg_init_one(&sg, test->buffer, BUFFER_SIZE); - ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0); - if (ret) - return ret; - - /* mmc_test_transfer() doesn't check for read overflows */ - for (i = size;i < BUFFER_SIZE;i++) { - if (test->buffer[i] != 0xCD) - return RESULT_FAIL; - } - - return 0; -} - #ifdef CONFIG_HIGHMEM static int mmc_test_write_high(struct mmc_test_card *test) @@ -1071,20 +1006,6 @@ static const struct mmc_test_case mmc_test_cases[] = { .run = mmc_test_multi_xfersize_read, }, - { - .name = "Over-sized SG list write", - .prepare = mmc_test_prepare_write, - .run = mmc_test_bigsg_write, - .cleanup = mmc_test_cleanup, - }, - - { - .name = "Over-sized SG list read", - .prepare = mmc_test_prepare_read, - .run = mmc_test_bigsg_read, - .cleanup = mmc_test_cleanup, - }, - #ifdef CONFIG_HIGHMEM { -- cgit v1.2.3 From a84756c5735f28bf000617f18734a9e94426386a Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 29 Jul 2008 01:09:37 +0200 Subject: mmc: properly iterate over sg list in debug check Signed-off-by: Pierre Ossman --- drivers/mmc/core/core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 3ee5b8c3b5ce..044d84eeed7c 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -121,6 +121,7 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) { #ifdef CONFIG_MMC_DEBUG unsigned int i, sz; + struct scatterlist *sg; #endif pr_debug("%s: starting CMD%u arg %08x flags %08x\n", @@ -156,8 +157,8 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) #ifdef CONFIG_MMC_DEBUG sz = 0; - for (i = 0;i < mrq->data->sg_len;i++) - sz += mrq->data->sg[i].length; + for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i) + sz += sg->length; BUG_ON(sz != mrq->data->blocks * mrq->data->blksz); #endif -- cgit v1.2.3 From b41e9c7b8e14ea57aa0fc05fd63a0de0e935d58d Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 29 Jul 2008 01:23:24 +0200 Subject: mmc_block: use proper sg iterators Signed-off-by: Pierre Ossman --- drivers/mmc/card/block.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 66e5a5487c20..86dbb366415a 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -213,7 +213,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) struct mmc_blk_data *md = mq->data; struct mmc_card *card = md->queue.card; struct mmc_blk_request brq; - int ret = 1, sg_pos, data_size; + int ret = 1, data_size, i; + struct scatterlist *sg; mmc_claim_host(card->host); @@ -267,18 +268,22 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) mmc_queue_bounce_pre(mq); + /* + * Adjust the sg list so it is the same size as the + * request. + */ if (brq.data.blocks != (req->nr_sectors >> (md->block_bits - 9))) { data_size = brq.data.blocks * brq.data.blksz; - for (sg_pos = 0; sg_pos < brq.data.sg_len; sg_pos++) { - data_size -= mq->sg[sg_pos].length; + for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) { + data_size -= sg->length; if (data_size <= 0) { - mq->sg[sg_pos].length += data_size; - sg_pos++; + sg->length += data_size; + i++; break; } } - brq.data.sg_len = sg_pos; + brq.data.sg_len = i; } mmc_wait_for_req(card->host, &brq.mrq); -- cgit v1.2.3 From e491d230fd398bb730e3c2dd734c5447463b9d38 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Tue, 29 Jul 2008 10:10:49 +0200 Subject: au1xmmc: raise segment size limit. Raise the DMA block size limit from 2048 bytes to the maximum supported by the DMA controllers on the chip (64KB on Au1100, 4MB on Au1200). This gives a very small performance boost and apparently fixes an oops when MMC-DMA and network traffic are active at the same time. Signed-off-by: Manuel Lauss Signed-off-by: Pierre Ossman --- drivers/mmc/host/au1xmmc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index 99b20917cc0f..d3f55615c099 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -61,7 +61,13 @@ /* Hardware definitions */ #define AU1XMMC_DESCRIPTOR_COUNT 1 -#define AU1XMMC_DESCRIPTOR_SIZE 2048 + +/* max DMA seg size: 64KB on Au1100, 4MB on Au1200 */ +#ifdef CONFIG_SOC_AU1100 +#define AU1XMMC_DESCRIPTOR_SIZE 0x0000ffff +#else /* Au1200 */ +#define AU1XMMC_DESCRIPTOR_SIZE 0x003fffff +#endif #define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \ MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \ -- cgit v1.2.3 From 7f30491ccd28627742e37899453ae20e3da8e18f Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Fri, 1 Aug 2008 10:13:32 -0700 Subject: [IA64] Move include/asm-ia64 to arch/ia64/include/asm After moving the the include files there were a few clean-ups: 1) Some files used #include , changed to 2) Some comments alerted maintainers to look at various header files to make matching updates if certain code were to be changed. Updated these comments to use the new include paths. 3) Some header files mentioned their own names in initial comments. Just deleted these self references. Signed-off-by: Tony Luck --- arch/ia64/include/asm/Kbuild | 16 + arch/ia64/include/asm/a.out.h | 32 + arch/ia64/include/asm/acpi-ext.h | 21 + arch/ia64/include/asm/acpi.h | 165 ++ arch/ia64/include/asm/agp.h | 30 + arch/ia64/include/asm/asmmacro.h | 135 + arch/ia64/include/asm/atomic.h | 226 ++ arch/ia64/include/asm/auxvec.h | 11 + arch/ia64/include/asm/bitops.h | 468 ++++ arch/ia64/include/asm/break.h | 23 + arch/ia64/include/asm/bug.h | 14 + arch/ia64/include/asm/bugs.h | 19 + arch/ia64/include/asm/byteorder.h | 42 + arch/ia64/include/asm/cache.h | 29 + arch/ia64/include/asm/cacheflush.h | 51 + arch/ia64/include/asm/checksum.h | 79 + arch/ia64/include/asm/compat.h | 207 ++ arch/ia64/include/asm/cpu.h | 22 + arch/ia64/include/asm/cputime.h | 109 + arch/ia64/include/asm/current.h | 17 + arch/ia64/include/asm/cyclone.h | 15 + arch/ia64/include/asm/delay.h | 88 + arch/ia64/include/asm/device.h | 15 + arch/ia64/include/asm/div64.h | 1 + arch/ia64/include/asm/dma-mapping.h | 97 + arch/ia64/include/asm/dma.h | 24 + arch/ia64/include/asm/dmi.h | 11 + arch/ia64/include/asm/elf.h | 269 ++ arch/ia64/include/asm/emergency-restart.h | 6 + arch/ia64/include/asm/errno.h | 1 + arch/ia64/include/asm/esi.h | 29 + arch/ia64/include/asm/fb.h | 23 + arch/ia64/include/asm/fcntl.h | 13 + arch/ia64/include/asm/fpswa.h | 73 + arch/ia64/include/asm/fpu.h | 66 + arch/ia64/include/asm/futex.h | 124 + arch/ia64/include/asm/gcc_intrin.h | 620 +++++ arch/ia64/include/asm/hardirq.h | 37 + arch/ia64/include/asm/hpsim.h | 16 + arch/ia64/include/asm/hugetlb.h | 80 + arch/ia64/include/asm/hw_irq.h | 192 ++ arch/ia64/include/asm/ia32.h | 40 + arch/ia64/include/asm/ia64regs.h | 100 + arch/ia64/include/asm/intel_intrin.h | 161 ++ arch/ia64/include/asm/intrinsics.h | 241 ++ arch/ia64/include/asm/io.h | 459 ++++ arch/ia64/include/asm/ioctl.h | 1 + arch/ia64/include/asm/ioctls.h | 93 + arch/ia64/include/asm/iosapic.h | 126 + arch/ia64/include/asm/ipcbuf.h | 28 + arch/ia64/include/asm/irq.h | 34 + arch/ia64/include/asm/irq_regs.h | 1 + arch/ia64/include/asm/kdebug.h | 57 + arch/ia64/include/asm/kexec.h | 44 + arch/ia64/include/asm/kmap_types.h | 30 + arch/ia64/include/asm/kprobes.h | 132 + arch/ia64/include/asm/kregs.h | 165 ++ arch/ia64/include/asm/kvm.h | 211 ++ arch/ia64/include/asm/kvm_host.h | 527 ++++ arch/ia64/include/asm/kvm_para.h | 27 + arch/ia64/include/asm/libata-portmap.h | 12 + arch/ia64/include/asm/linkage.h | 14 + arch/ia64/include/asm/local.h | 1 + arch/ia64/include/asm/machvec.h | 460 ++++ arch/ia64/include/asm/machvec_dig.h | 16 + arch/ia64/include/asm/machvec_hpsim.h | 18 + arch/ia64/include/asm/machvec_hpzx1.h | 37 + arch/ia64/include/asm/machvec_hpzx1_swiotlb.h | 42 + arch/ia64/include/asm/machvec_init.h | 33 + arch/ia64/include/asm/machvec_sn2.h | 139 + arch/ia64/include/asm/machvec_uv.h | 26 + arch/ia64/include/asm/mc146818rtc.h | 10 + arch/ia64/include/asm/mca.h | 179 ++ arch/ia64/include/asm/mca_asm.h | 242 ++ arch/ia64/include/asm/meminit.h | 75 + arch/ia64/include/asm/mman.h | 33 + arch/ia64/include/asm/mmu.h | 13 + arch/ia64/include/asm/mmu_context.h | 198 ++ arch/ia64/include/asm/mmzone.h | 50 + arch/ia64/include/asm/module.h | 36 + arch/ia64/include/asm/msgbuf.h | 27 + arch/ia64/include/asm/mutex.h | 92 + arch/ia64/include/asm/native/inst.h | 175 ++ arch/ia64/include/asm/native/irq.h | 33 + arch/ia64/include/asm/nodedata.h | 63 + arch/ia64/include/asm/numa.h | 82 + arch/ia64/include/asm/page.h | 223 ++ arch/ia64/include/asm/pal.h | 1827 ++++++++++++ arch/ia64/include/asm/param.h | 33 + arch/ia64/include/asm/paravirt.h | 253 ++ arch/ia64/include/asm/paravirt_privop.h | 112 + arch/ia64/include/asm/parport.h | 20 + arch/ia64/include/asm/patch.h | 27 + arch/ia64/include/asm/pci.h | 167 ++ arch/ia64/include/asm/percpu.h | 51 + arch/ia64/include/asm/perfmon.h | 279 ++ arch/ia64/include/asm/perfmon_default_smpl.h | 83 + arch/ia64/include/asm/pgalloc.h | 122 + arch/ia64/include/asm/pgtable.h | 615 +++++ arch/ia64/include/asm/poll.h | 1 + arch/ia64/include/asm/posix_types.h | 126 + arch/ia64/include/asm/processor.h | 771 ++++++ arch/ia64/include/asm/ptrace.h | 364 +++ arch/ia64/include/asm/ptrace_offsets.h | 268 ++ arch/ia64/include/asm/resource.h | 7 + arch/ia64/include/asm/rse.h | 66 + arch/ia64/include/asm/rwsem.h | 182 ++ arch/ia64/include/asm/sal.h | 905 ++++++ arch/ia64/include/asm/scatterlist.h | 38 + arch/ia64/include/asm/sections.h | 25 + arch/ia64/include/asm/segment.h | 6 + arch/ia64/include/asm/sembuf.h | 22 + arch/ia64/include/asm/serial.h | 17 + arch/ia64/include/asm/setup.h | 6 + arch/ia64/include/asm/shmbuf.h | 38 + arch/ia64/include/asm/shmparam.h | 12 + arch/ia64/include/asm/sigcontext.h | 70 + arch/ia64/include/asm/siginfo.h | 139 + arch/ia64/include/asm/signal.h | 160 ++ arch/ia64/include/asm/smp.h | 138 + arch/ia64/include/asm/sn/acpi.h | 17 + arch/ia64/include/asm/sn/addrs.h | 299 ++ arch/ia64/include/asm/sn/arch.h | 86 + arch/ia64/include/asm/sn/bte.h | 233 ++ arch/ia64/include/asm/sn/clksupport.h | 28 + arch/ia64/include/asm/sn/geo.h | 132 + arch/ia64/include/asm/sn/intr.h | 68 + arch/ia64/include/asm/sn/io.h | 274 ++ arch/ia64/include/asm/sn/ioc3.h | 241 ++ arch/ia64/include/asm/sn/klconfig.h | 246 ++ arch/ia64/include/asm/sn/l1.h | 51 + arch/ia64/include/asm/sn/leds.h | 33 + arch/ia64/include/asm/sn/module.h | 127 + arch/ia64/include/asm/sn/mspec.h | 59 + arch/ia64/include/asm/sn/nodepda.h | 82 + arch/ia64/include/asm/sn/pcibr_provider.h | 150 + arch/ia64/include/asm/sn/pcibus_provider_defs.h | 68 + arch/ia64/include/asm/sn/pcidev.h | 85 + arch/ia64/include/asm/sn/pda.h | 69 + arch/ia64/include/asm/sn/pic.h | 261 ++ arch/ia64/include/asm/sn/rw_mmr.h | 28 + arch/ia64/include/asm/sn/shub_mmr.h | 502 ++++ arch/ia64/include/asm/sn/shubio.h | 3358 +++++++++++++++++++++++ arch/ia64/include/asm/sn/simulator.h | 25 + arch/ia64/include/asm/sn/sn2/sn_hwperf.h | 242 ++ arch/ia64/include/asm/sn/sn_cpuid.h | 132 + arch/ia64/include/asm/sn/sn_feature_sets.h | 58 + arch/ia64/include/asm/sn/sn_sal.h | 1188 ++++++++ arch/ia64/include/asm/sn/tioca.h | 596 ++++ arch/ia64/include/asm/sn/tioca_provider.h | 207 ++ arch/ia64/include/asm/sn/tioce.h | 760 +++++ arch/ia64/include/asm/sn/tioce_provider.h | 63 + arch/ia64/include/asm/sn/tiocp.h | 257 ++ arch/ia64/include/asm/sn/tiocx.h | 72 + arch/ia64/include/asm/sn/types.h | 26 + arch/ia64/include/asm/socket.h | 66 + arch/ia64/include/asm/sockios.h | 20 + arch/ia64/include/asm/sparsemem.h | 20 + arch/ia64/include/asm/spinlock.h | 220 ++ arch/ia64/include/asm/spinlock_types.h | 21 + arch/ia64/include/asm/stat.h | 51 + arch/ia64/include/asm/statfs.h | 62 + arch/ia64/include/asm/string.h | 21 + arch/ia64/include/asm/suspend.h | 1 + arch/ia64/include/asm/system.h | 292 ++ arch/ia64/include/asm/termbits.h | 207 ++ arch/ia64/include/asm/termios.h | 97 + arch/ia64/include/asm/thread_info.h | 148 + arch/ia64/include/asm/timex.h | 42 + arch/ia64/include/asm/tlb.h | 257 ++ arch/ia64/include/asm/tlbflush.h | 102 + arch/ia64/include/asm/topology.h | 126 + arch/ia64/include/asm/types.h | 46 + arch/ia64/include/asm/uaccess.h | 401 +++ arch/ia64/include/asm/ucontext.h | 12 + arch/ia64/include/asm/unaligned.h | 11 + arch/ia64/include/asm/uncached.h | 12 + arch/ia64/include/asm/unistd.h | 384 +++ arch/ia64/include/asm/unwind.h | 233 ++ arch/ia64/include/asm/user.h | 58 + arch/ia64/include/asm/ustack.h | 20 + arch/ia64/include/asm/uv/uv_hub.h | 309 +++ arch/ia64/include/asm/uv/uv_mmrs.h | 673 +++++ arch/ia64/include/asm/vga.h | 25 + arch/ia64/include/asm/xor.h | 31 + arch/ia64/kernel/asm-offsets.c | 10 +- arch/ia64/kernel/head.S | 2 +- arch/ia64/kernel/iosapic.c | 2 +- arch/ia64/kernel/jprobes.S | 2 +- arch/ia64/kernel/nr-irqs.c | 2 +- arch/ia64/kernel/setup.c | 2 +- arch/ia64/sn/kernel/iomv.c | 2 +- include/asm-ia64/Kbuild | 16 - include/asm-ia64/a.out.h | 32 - include/asm-ia64/acpi-ext.h | 21 - include/asm-ia64/acpi.h | 167 -- include/asm-ia64/agp.h | 30 - include/asm-ia64/asmmacro.h | 135 - include/asm-ia64/atomic.h | 226 -- include/asm-ia64/auxvec.h | 11 - include/asm-ia64/bitops.h | 468 ---- include/asm-ia64/break.h | 23 - include/asm-ia64/bug.h | 14 - include/asm-ia64/bugs.h | 19 - include/asm-ia64/byteorder.h | 42 - include/asm-ia64/cache.h | 29 - include/asm-ia64/cacheflush.h | 51 - include/asm-ia64/checksum.h | 79 - include/asm-ia64/compat.h | 207 -- include/asm-ia64/cpu.h | 22 - include/asm-ia64/cputime.h | 110 - include/asm-ia64/current.h | 17 - include/asm-ia64/cyclone.h | 15 - include/asm-ia64/delay.h | 88 - include/asm-ia64/device.h | 15 - include/asm-ia64/div64.h | 1 - include/asm-ia64/dma-mapping.h | 97 - include/asm-ia64/dma.h | 24 - include/asm-ia64/dmi.h | 11 - include/asm-ia64/elf.h | 269 -- include/asm-ia64/emergency-restart.h | 6 - include/asm-ia64/errno.h | 1 - include/asm-ia64/esi.h | 29 - include/asm-ia64/fb.h | 23 - include/asm-ia64/fcntl.h | 13 - include/asm-ia64/fpswa.h | 73 - include/asm-ia64/fpu.h | 66 - include/asm-ia64/futex.h | 124 - include/asm-ia64/gcc_intrin.h | 620 ----- include/asm-ia64/hardirq.h | 37 - include/asm-ia64/hpsim.h | 16 - include/asm-ia64/hugetlb.h | 80 - include/asm-ia64/hw_irq.h | 192 -- include/asm-ia64/ia32.h | 40 - include/asm-ia64/ia64regs.h | 100 - include/asm-ia64/intel_intrin.h | 161 -- include/asm-ia64/intrinsics.h | 241 -- include/asm-ia64/io.h | 459 ---- include/asm-ia64/ioctl.h | 1 - include/asm-ia64/ioctls.h | 93 - include/asm-ia64/iosapic.h | 126 - include/asm-ia64/ipcbuf.h | 28 - include/asm-ia64/irq.h | 34 - include/asm-ia64/irq_regs.h | 1 - include/asm-ia64/kdebug.h | 59 - include/asm-ia64/kexec.h | 44 - include/asm-ia64/kmap_types.h | 30 - include/asm-ia64/kprobes.h | 133 - include/asm-ia64/kregs.h | 165 -- include/asm-ia64/kvm.h | 211 -- include/asm-ia64/kvm_host.h | 527 ---- include/asm-ia64/kvm_para.h | 29 - include/asm-ia64/libata-portmap.h | 12 - include/asm-ia64/linkage.h | 14 - include/asm-ia64/local.h | 1 - include/asm-ia64/machvec.h | 460 ---- include/asm-ia64/machvec_dig.h | 16 - include/asm-ia64/machvec_hpsim.h | 18 - include/asm-ia64/machvec_hpzx1.h | 37 - include/asm-ia64/machvec_hpzx1_swiotlb.h | 42 - include/asm-ia64/machvec_init.h | 33 - include/asm-ia64/machvec_sn2.h | 139 - include/asm-ia64/machvec_uv.h | 26 - include/asm-ia64/mc146818rtc.h | 10 - include/asm-ia64/mca.h | 179 -- include/asm-ia64/mca_asm.h | 242 -- include/asm-ia64/meminit.h | 75 - include/asm-ia64/mman.h | 33 - include/asm-ia64/mmu.h | 13 - include/asm-ia64/mmu_context.h | 198 -- include/asm-ia64/mmzone.h | 50 - include/asm-ia64/module.h | 36 - include/asm-ia64/msgbuf.h | 27 - include/asm-ia64/mutex.h | 92 - include/asm-ia64/native/inst.h | 175 -- include/asm-ia64/native/irq.h | 35 - include/asm-ia64/nodedata.h | 63 - include/asm-ia64/numa.h | 82 - include/asm-ia64/page.h | 223 -- include/asm-ia64/pal.h | 1827 ------------ include/asm-ia64/param.h | 33 - include/asm-ia64/paravirt.h | 255 -- include/asm-ia64/paravirt_privop.h | 114 - include/asm-ia64/parport.h | 20 - include/asm-ia64/patch.h | 27 - include/asm-ia64/pci.h | 167 -- include/asm-ia64/percpu.h | 51 - include/asm-ia64/perfmon.h | 279 -- include/asm-ia64/perfmon_default_smpl.h | 83 - include/asm-ia64/pgalloc.h | 122 - include/asm-ia64/pgtable.h | 615 ----- include/asm-ia64/poll.h | 1 - include/asm-ia64/posix_types.h | 126 - include/asm-ia64/processor.h | 771 ------ include/asm-ia64/ptrace.h | 364 --- include/asm-ia64/ptrace_offsets.h | 268 -- include/asm-ia64/resource.h | 7 - include/asm-ia64/rse.h | 66 - include/asm-ia64/rwsem.h | 182 -- include/asm-ia64/sal.h | 905 ------ include/asm-ia64/scatterlist.h | 38 - include/asm-ia64/sections.h | 25 - include/asm-ia64/segment.h | 6 - include/asm-ia64/sembuf.h | 22 - include/asm-ia64/serial.h | 19 - include/asm-ia64/setup.h | 6 - include/asm-ia64/shmbuf.h | 38 - include/asm-ia64/shmparam.h | 12 - include/asm-ia64/sigcontext.h | 70 - include/asm-ia64/siginfo.h | 139 - include/asm-ia64/signal.h | 160 -- include/asm-ia64/smp.h | 138 - include/asm-ia64/sn/acpi.h | 17 - include/asm-ia64/sn/addrs.h | 299 -- include/asm-ia64/sn/arch.h | 86 - include/asm-ia64/sn/bte.h | 233 -- include/asm-ia64/sn/clksupport.h | 28 - include/asm-ia64/sn/geo.h | 132 - include/asm-ia64/sn/intr.h | 68 - include/asm-ia64/sn/io.h | 274 -- include/asm-ia64/sn/ioc3.h | 241 -- include/asm-ia64/sn/klconfig.h | 246 -- include/asm-ia64/sn/l1.h | 51 - include/asm-ia64/sn/leds.h | 33 - include/asm-ia64/sn/module.h | 127 - include/asm-ia64/sn/mspec.h | 59 - include/asm-ia64/sn/nodepda.h | 82 - include/asm-ia64/sn/pcibr_provider.h | 150 - include/asm-ia64/sn/pcibus_provider_defs.h | 68 - include/asm-ia64/sn/pcidev.h | 85 - include/asm-ia64/sn/pda.h | 69 - include/asm-ia64/sn/pic.h | 261 -- include/asm-ia64/sn/rw_mmr.h | 28 - include/asm-ia64/sn/shub_mmr.h | 502 ---- include/asm-ia64/sn/shubio.h | 3358 ----------------------- include/asm-ia64/sn/simulator.h | 25 - include/asm-ia64/sn/sn2/sn_hwperf.h | 242 -- include/asm-ia64/sn/sn_cpuid.h | 132 - include/asm-ia64/sn/sn_feature_sets.h | 58 - include/asm-ia64/sn/sn_sal.h | 1188 -------- include/asm-ia64/sn/tioca.h | 596 ---- include/asm-ia64/sn/tioca_provider.h | 207 -- include/asm-ia64/sn/tioce.h | 760 ----- include/asm-ia64/sn/tioce_provider.h | 63 - include/asm-ia64/sn/tiocp.h | 257 -- include/asm-ia64/sn/tiocx.h | 72 - include/asm-ia64/sn/types.h | 26 - include/asm-ia64/socket.h | 66 - include/asm-ia64/sockios.h | 20 - include/asm-ia64/sparsemem.h | 20 - include/asm-ia64/spinlock.h | 220 -- include/asm-ia64/spinlock_types.h | 21 - include/asm-ia64/stat.h | 51 - include/asm-ia64/statfs.h | 62 - include/asm-ia64/string.h | 21 - include/asm-ia64/suspend.h | 1 - include/asm-ia64/system.h | 292 -- include/asm-ia64/termbits.h | 207 -- include/asm-ia64/termios.h | 97 - include/asm-ia64/thread_info.h | 148 - include/asm-ia64/timex.h | 42 - include/asm-ia64/tlb.h | 257 -- include/asm-ia64/tlbflush.h | 102 - include/asm-ia64/topology.h | 128 - include/asm-ia64/types.h | 46 - include/asm-ia64/uaccess.h | 401 --- include/asm-ia64/ucontext.h | 12 - include/asm-ia64/unaligned.h | 11 - include/asm-ia64/uncached.h | 12 - include/asm-ia64/unistd.h | 384 --- include/asm-ia64/unwind.h | 233 -- include/asm-ia64/user.h | 58 - include/asm-ia64/ustack.h | 20 - include/asm-ia64/uv/uv_hub.h | 309 --- include/asm-ia64/uv/uv_mmrs.h | 673 ----- include/asm-ia64/vga.h | 25 - include/asm-ia64/xor.h | 33 - 377 files changed, 29374 insertions(+), 29394 deletions(-) create mode 100644 arch/ia64/include/asm/Kbuild create mode 100644 arch/ia64/include/asm/a.out.h create mode 100644 arch/ia64/include/asm/acpi-ext.h create mode 100644 arch/ia64/include/asm/acpi.h create mode 100644 arch/ia64/include/asm/agp.h create mode 100644 arch/ia64/include/asm/asmmacro.h create mode 100644 arch/ia64/include/asm/atomic.h create mode 100644 arch/ia64/include/asm/auxvec.h create mode 100644 arch/ia64/include/asm/bitops.h create mode 100644 arch/ia64/include/asm/break.h create mode 100644 arch/ia64/include/asm/bug.h create mode 100644 arch/ia64/include/asm/bugs.h create mode 100644 arch/ia64/include/asm/byteorder.h create mode 100644 arch/ia64/include/asm/cache.h create mode 100644 arch/ia64/include/asm/cacheflush.h create mode 100644 arch/ia64/include/asm/checksum.h create mode 100644 arch/ia64/include/asm/compat.h create mode 100644 arch/ia64/include/asm/cpu.h create mode 100644 arch/ia64/include/asm/cputime.h create mode 100644 arch/ia64/include/asm/current.h create mode 100644 arch/ia64/include/asm/cyclone.h create mode 100644 arch/ia64/include/asm/delay.h create mode 100644 arch/ia64/include/asm/device.h create mode 100644 arch/ia64/include/asm/div64.h create mode 100644 arch/ia64/include/asm/dma-mapping.h create mode 100644 arch/ia64/include/asm/dma.h create mode 100644 arch/ia64/include/asm/dmi.h create mode 100644 arch/ia64/include/asm/elf.h create mode 100644 arch/ia64/include/asm/emergency-restart.h create mode 100644 arch/ia64/include/asm/errno.h create mode 100644 arch/ia64/include/asm/esi.h create mode 100644 arch/ia64/include/asm/fb.h create mode 100644 arch/ia64/include/asm/fcntl.h create mode 100644 arch/ia64/include/asm/fpswa.h create mode 100644 arch/ia64/include/asm/fpu.h create mode 100644 arch/ia64/include/asm/futex.h create mode 100644 arch/ia64/include/asm/gcc_intrin.h create mode 100644 arch/ia64/include/asm/hardirq.h create mode 100644 arch/ia64/include/asm/hpsim.h create mode 100644 arch/ia64/include/asm/hugetlb.h create mode 100644 arch/ia64/include/asm/hw_irq.h create mode 100644 arch/ia64/include/asm/ia32.h create mode 100644 arch/ia64/include/asm/ia64regs.h create mode 100644 arch/ia64/include/asm/intel_intrin.h create mode 100644 arch/ia64/include/asm/intrinsics.h create mode 100644 arch/ia64/include/asm/io.h create mode 100644 arch/ia64/include/asm/ioctl.h create mode 100644 arch/ia64/include/asm/ioctls.h create mode 100644 arch/ia64/include/asm/iosapic.h create mode 100644 arch/ia64/include/asm/ipcbuf.h create mode 100644 arch/ia64/include/asm/irq.h create mode 100644 arch/ia64/include/asm/irq_regs.h create mode 100644 arch/ia64/include/asm/kdebug.h create mode 100644 arch/ia64/include/asm/kexec.h create mode 100644 arch/ia64/include/asm/kmap_types.h create mode 100644 arch/ia64/include/asm/kprobes.h create mode 100644 arch/ia64/include/asm/kregs.h create mode 100644 arch/ia64/include/asm/kvm.h create mode 100644 arch/ia64/include/asm/kvm_host.h create mode 100644 arch/ia64/include/asm/kvm_para.h create mode 100644 arch/ia64/include/asm/libata-portmap.h create mode 100644 arch/ia64/include/asm/linkage.h create mode 100644 arch/ia64/include/asm/local.h create mode 100644 arch/ia64/include/asm/machvec.h create mode 100644 arch/ia64/include/asm/machvec_dig.h create mode 100644 arch/ia64/include/asm/machvec_hpsim.h create mode 100644 arch/ia64/include/asm/machvec_hpzx1.h create mode 100644 arch/ia64/include/asm/machvec_hpzx1_swiotlb.h create mode 100644 arch/ia64/include/asm/machvec_init.h create mode 100644 arch/ia64/include/asm/machvec_sn2.h create mode 100644 arch/ia64/include/asm/machvec_uv.h create mode 100644 arch/ia64/include/asm/mc146818rtc.h create mode 100644 arch/ia64/include/asm/mca.h create mode 100644 arch/ia64/include/asm/mca_asm.h create mode 100644 arch/ia64/include/asm/meminit.h create mode 100644 arch/ia64/include/asm/mman.h create mode 100644 arch/ia64/include/asm/mmu.h create mode 100644 arch/ia64/include/asm/mmu_context.h create mode 100644 arch/ia64/include/asm/mmzone.h create mode 100644 arch/ia64/include/asm/module.h create mode 100644 arch/ia64/include/asm/msgbuf.h create mode 100644 arch/ia64/include/asm/mutex.h create mode 100644 arch/ia64/include/asm/native/inst.h create mode 100644 arch/ia64/include/asm/native/irq.h create mode 100644 arch/ia64/include/asm/nodedata.h create mode 100644 arch/ia64/include/asm/numa.h create mode 100644 arch/ia64/include/asm/page.h create mode 100644 arch/ia64/include/asm/pal.h create mode 100644 arch/ia64/include/asm/param.h create mode 100644 arch/ia64/include/asm/paravirt.h create mode 100644 arch/ia64/include/asm/paravirt_privop.h create mode 100644 arch/ia64/include/asm/parport.h create mode 100644 arch/ia64/include/asm/patch.h create mode 100644 arch/ia64/include/asm/pci.h create mode 100644 arch/ia64/include/asm/percpu.h create mode 100644 arch/ia64/include/asm/perfmon.h create mode 100644 arch/ia64/include/asm/perfmon_default_smpl.h create mode 100644 arch/ia64/include/asm/pgalloc.h create mode 100644 arch/ia64/include/asm/pgtable.h create mode 100644 arch/ia64/include/asm/poll.h create mode 100644 arch/ia64/include/asm/posix_types.h create mode 100644 arch/ia64/include/asm/processor.h create mode 100644 arch/ia64/include/asm/ptrace.h create mode 100644 arch/ia64/include/asm/ptrace_offsets.h create mode 100644 arch/ia64/include/asm/resource.h create mode 100644 arch/ia64/include/asm/rse.h create mode 100644 arch/ia64/include/asm/rwsem.h create mode 100644 arch/ia64/include/asm/sal.h create mode 100644 arch/ia64/include/asm/scatterlist.h create mode 100644 arch/ia64/include/asm/sections.h create mode 100644 arch/ia64/include/asm/segment.h create mode 100644 arch/ia64/include/asm/sembuf.h create mode 100644 arch/ia64/include/asm/serial.h create mode 100644 arch/ia64/include/asm/setup.h create mode 100644 arch/ia64/include/asm/shmbuf.h create mode 100644 arch/ia64/include/asm/shmparam.h create mode 100644 arch/ia64/include/asm/sigcontext.h create mode 100644 arch/ia64/include/asm/siginfo.h create mode 100644 arch/ia64/include/asm/signal.h create mode 100644 arch/ia64/include/asm/smp.h create mode 100644 arch/ia64/include/asm/sn/acpi.h create mode 100644 arch/ia64/include/asm/sn/addrs.h create mode 100644 arch/ia64/include/asm/sn/arch.h create mode 100644 arch/ia64/include/asm/sn/bte.h create mode 100644 arch/ia64/include/asm/sn/clksupport.h create mode 100644 arch/ia64/include/asm/sn/geo.h create mode 100644 arch/ia64/include/asm/sn/intr.h create mode 100644 arch/ia64/include/asm/sn/io.h create mode 100644 arch/ia64/include/asm/sn/ioc3.h create mode 100644 arch/ia64/include/asm/sn/klconfig.h create mode 100644 arch/ia64/include/asm/sn/l1.h create mode 100644 arch/ia64/include/asm/sn/leds.h create mode 100644 arch/ia64/include/asm/sn/module.h create mode 100644 arch/ia64/include/asm/sn/mspec.h create mode 100644 arch/ia64/include/asm/sn/nodepda.h create mode 100644 arch/ia64/include/asm/sn/pcibr_provider.h create mode 100644 arch/ia64/include/asm/sn/pcibus_provider_defs.h create mode 100644 arch/ia64/include/asm/sn/pcidev.h create mode 100644 arch/ia64/include/asm/sn/pda.h create mode 100644 arch/ia64/include/asm/sn/pic.h create mode 100644 arch/ia64/include/asm/sn/rw_mmr.h create mode 100644 arch/ia64/include/asm/sn/shub_mmr.h create mode 100644 arch/ia64/include/asm/sn/shubio.h create mode 100644 arch/ia64/include/asm/sn/simulator.h create mode 100644 arch/ia64/include/asm/sn/sn2/sn_hwperf.h create mode 100644 arch/ia64/include/asm/sn/sn_cpuid.h create mode 100644 arch/ia64/include/asm/sn/sn_feature_sets.h create mode 100644 arch/ia64/include/asm/sn/sn_sal.h create mode 100644 arch/ia64/include/asm/sn/tioca.h create mode 100644 arch/ia64/include/asm/sn/tioca_provider.h create mode 100644 arch/ia64/include/asm/sn/tioce.h create mode 100644 arch/ia64/include/asm/sn/tioce_provider.h create mode 100644 arch/ia64/include/asm/sn/tiocp.h create mode 100644 arch/ia64/include/asm/sn/tiocx.h create mode 100644 arch/ia64/include/asm/sn/types.h create mode 100644 arch/ia64/include/asm/socket.h create mode 100644 arch/ia64/include/asm/sockios.h create mode 100644 arch/ia64/include/asm/sparsemem.h create mode 100644 arch/ia64/include/asm/spinlock.h create mode 100644 arch/ia64/include/asm/spinlock_types.h create mode 100644 arch/ia64/include/asm/stat.h create mode 100644 arch/ia64/include/asm/statfs.h create mode 100644 arch/ia64/include/asm/string.h create mode 100644 arch/ia64/include/asm/suspend.h create mode 100644 arch/ia64/include/asm/system.h create mode 100644 arch/ia64/include/asm/termbits.h create mode 100644 arch/ia64/include/asm/termios.h create mode 100644 arch/ia64/include/asm/thread_info.h create mode 100644 arch/ia64/include/asm/timex.h create mode 100644 arch/ia64/include/asm/tlb.h create mode 100644 arch/ia64/include/asm/tlbflush.h create mode 100644 arch/ia64/include/asm/topology.h create mode 100644 arch/ia64/include/asm/types.h create mode 100644 arch/ia64/include/asm/uaccess.h create mode 100644 arch/ia64/include/asm/ucontext.h create mode 100644 arch/ia64/include/asm/unaligned.h create mode 100644 arch/ia64/include/asm/uncached.h create mode 100644 arch/ia64/include/asm/unistd.h create mode 100644 arch/ia64/include/asm/unwind.h create mode 100644 arch/ia64/include/asm/user.h create mode 100644 arch/ia64/include/asm/ustack.h create mode 100644 arch/ia64/include/asm/uv/uv_hub.h create mode 100644 arch/ia64/include/asm/uv/uv_mmrs.h create mode 100644 arch/ia64/include/asm/vga.h create mode 100644 arch/ia64/include/asm/xor.h delete mode 100644 include/asm-ia64/Kbuild delete mode 100644 include/asm-ia64/a.out.h delete mode 100644 include/asm-ia64/acpi-ext.h delete mode 100644 include/asm-ia64/acpi.h delete mode 100644 include/asm-ia64/agp.h delete mode 100644 include/asm-ia64/asmmacro.h delete mode 100644 include/asm-ia64/atomic.h delete mode 100644 include/asm-ia64/auxvec.h delete mode 100644 include/asm-ia64/bitops.h delete mode 100644 include/asm-ia64/break.h delete mode 100644 include/asm-ia64/bug.h delete mode 100644 include/asm-ia64/bugs.h delete mode 100644 include/asm-ia64/byteorder.h delete mode 100644 include/asm-ia64/cache.h delete mode 100644 include/asm-ia64/cacheflush.h delete mode 100644 include/asm-ia64/checksum.h delete mode 100644 include/asm-ia64/compat.h delete mode 100644 include/asm-ia64/cpu.h delete mode 100644 include/asm-ia64/cputime.h delete mode 100644 include/asm-ia64/current.h delete mode 100644 include/asm-ia64/cyclone.h delete mode 100644 include/asm-ia64/delay.h delete mode 100644 include/asm-ia64/device.h delete mode 100644 include/asm-ia64/div64.h delete mode 100644 include/asm-ia64/dma-mapping.h delete mode 100644 include/asm-ia64/dma.h delete mode 100644 include/asm-ia64/dmi.h delete mode 100644 include/asm-ia64/elf.h delete mode 100644 include/asm-ia64/emergency-restart.h delete mode 100644 include/asm-ia64/errno.h delete mode 100644 include/asm-ia64/esi.h delete mode 100644 include/asm-ia64/fb.h delete mode 100644 include/asm-ia64/fcntl.h delete mode 100644 include/asm-ia64/fpswa.h delete mode 100644 include/asm-ia64/fpu.h delete mode 100644 include/asm-ia64/futex.h delete mode 100644 include/asm-ia64/gcc_intrin.h delete mode 100644 include/asm-ia64/hardirq.h delete mode 100644 include/asm-ia64/hpsim.h delete mode 100644 include/asm-ia64/hugetlb.h delete mode 100644 include/asm-ia64/hw_irq.h delete mode 100644 include/asm-ia64/ia32.h delete mode 100644 include/asm-ia64/ia64regs.h delete mode 100644 include/asm-ia64/intel_intrin.h delete mode 100644 include/asm-ia64/intrinsics.h delete mode 100644 include/asm-ia64/io.h delete mode 100644 include/asm-ia64/ioctl.h delete mode 100644 include/asm-ia64/ioctls.h delete mode 100644 include/asm-ia64/iosapic.h delete mode 100644 include/asm-ia64/ipcbuf.h delete mode 100644 include/asm-ia64/irq.h delete mode 100644 include/asm-ia64/irq_regs.h delete mode 100644 include/asm-ia64/kdebug.h delete mode 100644 include/asm-ia64/kexec.h delete mode 100644 include/asm-ia64/kmap_types.h delete mode 100644 include/asm-ia64/kprobes.h delete mode 100644 include/asm-ia64/kregs.h delete mode 100644 include/asm-ia64/kvm.h delete mode 100644 include/asm-ia64/kvm_host.h delete mode 100644 include/asm-ia64/kvm_para.h delete mode 100644 include/asm-ia64/libata-portmap.h delete mode 100644 include/asm-ia64/linkage.h delete mode 100644 include/asm-ia64/local.h delete mode 100644 include/asm-ia64/machvec.h delete mode 100644 include/asm-ia64/machvec_dig.h delete mode 100644 include/asm-ia64/machvec_hpsim.h delete mode 100644 include/asm-ia64/machvec_hpzx1.h delete mode 100644 include/asm-ia64/machvec_hpzx1_swiotlb.h delete mode 100644 include/asm-ia64/machvec_init.h delete mode 100644 include/asm-ia64/machvec_sn2.h delete mode 100644 include/asm-ia64/machvec_uv.h delete mode 100644 include/asm-ia64/mc146818rtc.h delete mode 100644 include/asm-ia64/mca.h delete mode 100644 include/asm-ia64/mca_asm.h delete mode 100644 include/asm-ia64/meminit.h delete mode 100644 include/asm-ia64/mman.h delete mode 100644 include/asm-ia64/mmu.h delete mode 100644 include/asm-ia64/mmu_context.h delete mode 100644 include/asm-ia64/mmzone.h delete mode 100644 include/asm-ia64/module.h delete mode 100644 include/asm-ia64/msgbuf.h delete mode 100644 include/asm-ia64/mutex.h delete mode 100644 include/asm-ia64/native/inst.h delete mode 100644 include/asm-ia64/native/irq.h delete mode 100644 include/asm-ia64/nodedata.h delete mode 100644 include/asm-ia64/numa.h delete mode 100644 include/asm-ia64/page.h delete mode 100644 include/asm-ia64/pal.h delete mode 100644 include/asm-ia64/param.h delete mode 100644 include/asm-ia64/paravirt.h delete mode 100644 include/asm-ia64/paravirt_privop.h delete mode 100644 include/asm-ia64/parport.h delete mode 100644 include/asm-ia64/patch.h delete mode 100644 include/asm-ia64/pci.h delete mode 100644 include/asm-ia64/percpu.h delete mode 100644 include/asm-ia64/perfmon.h delete mode 100644 include/asm-ia64/perfmon_default_smpl.h delete mode 100644 include/asm-ia64/pgalloc.h delete mode 100644 include/asm-ia64/pgtable.h delete mode 100644 include/asm-ia64/poll.h delete mode 100644 include/asm-ia64/posix_types.h delete mode 100644 include/asm-ia64/processor.h delete mode 100644 include/asm-ia64/ptrace.h delete mode 100644 include/asm-ia64/ptrace_offsets.h delete mode 100644 include/asm-ia64/resource.h delete mode 100644 include/asm-ia64/rse.h delete mode 100644 include/asm-ia64/rwsem.h delete mode 100644 include/asm-ia64/sal.h delete mode 100644 include/asm-ia64/scatterlist.h delete mode 100644 include/asm-ia64/sections.h delete mode 100644 include/asm-ia64/segment.h delete mode 100644 include/asm-ia64/sembuf.h delete mode 100644 include/asm-ia64/serial.h delete mode 100644 include/asm-ia64/setup.h delete mode 100644 include/asm-ia64/shmbuf.h delete mode 100644 include/asm-ia64/shmparam.h delete mode 100644 include/asm-ia64/sigcontext.h delete mode 100644 include/asm-ia64/siginfo.h delete mode 100644 include/asm-ia64/signal.h delete mode 100644 include/asm-ia64/smp.h delete mode 100644 include/asm-ia64/sn/acpi.h delete mode 100644 include/asm-ia64/sn/addrs.h delete mode 100644 include/asm-ia64/sn/arch.h delete mode 100644 include/asm-ia64/sn/bte.h delete mode 100644 include/asm-ia64/sn/clksupport.h delete mode 100644 include/asm-ia64/sn/geo.h delete mode 100644 include/asm-ia64/sn/intr.h delete mode 100644 include/asm-ia64/sn/io.h delete mode 100644 include/asm-ia64/sn/ioc3.h delete mode 100644 include/asm-ia64/sn/klconfig.h delete mode 100644 include/asm-ia64/sn/l1.h delete mode 100644 include/asm-ia64/sn/leds.h delete mode 100644 include/asm-ia64/sn/module.h delete mode 100644 include/asm-ia64/sn/mspec.h delete mode 100644 include/asm-ia64/sn/nodepda.h delete mode 100644 include/asm-ia64/sn/pcibr_provider.h delete mode 100644 include/asm-ia64/sn/pcibus_provider_defs.h delete mode 100644 include/asm-ia64/sn/pcidev.h delete mode 100644 include/asm-ia64/sn/pda.h delete mode 100644 include/asm-ia64/sn/pic.h delete mode 100644 include/asm-ia64/sn/rw_mmr.h delete mode 100644 include/asm-ia64/sn/shub_mmr.h delete mode 100644 include/asm-ia64/sn/shubio.h delete mode 100644 include/asm-ia64/sn/simulator.h delete mode 100644 include/asm-ia64/sn/sn2/sn_hwperf.h delete mode 100644 include/asm-ia64/sn/sn_cpuid.h delete mode 100644 include/asm-ia64/sn/sn_feature_sets.h delete mode 100644 include/asm-ia64/sn/sn_sal.h delete mode 100644 include/asm-ia64/sn/tioca.h delete mode 100644 include/asm-ia64/sn/tioca_provider.h delete mode 100644 include/asm-ia64/sn/tioce.h delete mode 100644 include/asm-ia64/sn/tioce_provider.h delete mode 100644 include/asm-ia64/sn/tiocp.h delete mode 100644 include/asm-ia64/sn/tiocx.h delete mode 100644 include/asm-ia64/sn/types.h delete mode 100644 include/asm-ia64/socket.h delete mode 100644 include/asm-ia64/sockios.h delete mode 100644 include/asm-ia64/sparsemem.h delete mode 100644 include/asm-ia64/spinlock.h delete mode 100644 include/asm-ia64/spinlock_types.h delete mode 100644 include/asm-ia64/stat.h delete mode 100644 include/asm-ia64/statfs.h delete mode 100644 include/asm-ia64/string.h delete mode 100644 include/asm-ia64/suspend.h delete mode 100644 include/asm-ia64/system.h delete mode 100644 include/asm-ia64/termbits.h delete mode 100644 include/asm-ia64/termios.h delete mode 100644 include/asm-ia64/thread_info.h delete mode 100644 include/asm-ia64/timex.h delete mode 100644 include/asm-ia64/tlb.h delete mode 100644 include/asm-ia64/tlbflush.h delete mode 100644 include/asm-ia64/topology.h delete mode 100644 include/asm-ia64/types.h delete mode 100644 include/asm-ia64/uaccess.h delete mode 100644 include/asm-ia64/ucontext.h delete mode 100644 include/asm-ia64/unaligned.h delete mode 100644 include/asm-ia64/uncached.h delete mode 100644 include/asm-ia64/unistd.h delete mode 100644 include/asm-ia64/unwind.h delete mode 100644 include/asm-ia64/user.h delete mode 100644 include/asm-ia64/ustack.h delete mode 100644 include/asm-ia64/uv/uv_hub.h delete mode 100644 include/asm-ia64/uv/uv_mmrs.h delete mode 100644 include/asm-ia64/vga.h delete mode 100644 include/asm-ia64/xor.h diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild new file mode 100644 index 000000000000..ccbe8ae47a61 --- /dev/null +++ b/arch/ia64/include/asm/Kbuild @@ -0,0 +1,16 @@ +include include/asm-generic/Kbuild.asm + +header-y += break.h +header-y += fpu.h +header-y += fpswa.h +header-y += ia64regs.h +header-y += intel_intrin.h +header-y += perfmon_default_smpl.h +header-y += ptrace_offsets.h +header-y += rse.h +header-y += ucontext.h + +unifdef-y += gcc_intrin.h +unifdef-y += intrinsics.h +unifdef-y += perfmon.h +unifdef-y += ustack.h diff --git a/arch/ia64/include/asm/a.out.h b/arch/ia64/include/asm/a.out.h new file mode 100644 index 000000000000..193dcfb67596 --- /dev/null +++ b/arch/ia64/include/asm/a.out.h @@ -0,0 +1,32 @@ +#ifndef _ASM_IA64_A_OUT_H +#define _ASM_IA64_A_OUT_H + +/* + * No a.out format has been (or should be) defined so this file is + * just a dummy that allows us to get binfmt_elf compiled. It + * probably would be better to clean up binfmt_elf.c so it does not + * necessarily depend on there being a.out support. + * + * Modified 1998-2002 + * David Mosberger-Tang , Hewlett-Packard Co. + */ + +#include + +struct exec { + unsigned long a_info; + unsigned long a_text; + unsigned long a_data; + unsigned long a_bss; + unsigned long a_entry; +}; + +#define N_TXTADDR(x) 0 +#define N_DATADDR(x) 0 +#define N_BSSADDR(x) 0 +#define N_DRSIZE(x) 0 +#define N_TRSIZE(x) 0 +#define N_SYMSIZE(x) 0 +#define N_TXTOFF(x) 0 + +#endif /* _ASM_IA64_A_OUT_H */ diff --git a/arch/ia64/include/asm/acpi-ext.h b/arch/ia64/include/asm/acpi-ext.h new file mode 100644 index 000000000000..734d137dda6e --- /dev/null +++ b/arch/ia64/include/asm/acpi-ext.h @@ -0,0 +1,21 @@ +/* + * (c) Copyright 2003, 2006 Hewlett-Packard Development Company, L.P. + * Alex Williamson + * Bjorn Helgaas + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Vendor specific extensions to ACPI. + */ + +#ifndef _ASM_IA64_ACPI_EXT_H +#define _ASM_IA64_ACPI_EXT_H + +#include +#include + +extern acpi_status hp_acpi_csr_space (acpi_handle, u64 *base, u64 *length); + +#endif /* _ASM_IA64_ACPI_EXT_H */ diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h new file mode 100644 index 000000000000..0f82cc2934e1 --- /dev/null +++ b/arch/ia64/include/asm/acpi.h @@ -0,0 +1,165 @@ +/* + * Copyright (C) 1999 VA Linux Systems + * Copyright (C) 1999 Walt Drummond + * Copyright (C) 2000,2001 J.I. Lee + * Copyright (C) 2001,2002 Paul Diefenbaugh + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#ifndef _ASM_ACPI_H +#define _ASM_ACPI_H + +#ifdef __KERNEL__ + +#include + +#include +#include +#include +#include + +#define COMPILER_DEPENDENT_INT64 long +#define COMPILER_DEPENDENT_UINT64 unsigned long + +/* + * Calling conventions: + * + * ACPI_SYSTEM_XFACE - Interfaces to host OS (handlers, threads) + * ACPI_EXTERNAL_XFACE - External ACPI interfaces + * ACPI_INTERNAL_XFACE - Internal ACPI interfaces + * ACPI_INTERNAL_VAR_XFACE - Internal variable-parameter list interfaces + */ +#define ACPI_SYSTEM_XFACE +#define ACPI_EXTERNAL_XFACE +#define ACPI_INTERNAL_XFACE +#define ACPI_INTERNAL_VAR_XFACE + +/* Asm macros */ + +#define ACPI_ASM_MACROS +#define BREAKPOINT3 +#define ACPI_DISABLE_IRQS() local_irq_disable() +#define ACPI_ENABLE_IRQS() local_irq_enable() +#define ACPI_FLUSH_CPU_CACHE() + +static inline int +ia64_acpi_acquire_global_lock (unsigned int *lock) +{ + unsigned int old, new, val; + do { + old = *lock; + new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1)); + val = ia64_cmpxchg4_acq(lock, new, old); + } while (unlikely (val != old)); + return (new < 3) ? -1 : 0; +} + +static inline int +ia64_acpi_release_global_lock (unsigned int *lock) +{ + unsigned int old, new, val; + do { + old = *lock; + new = old & ~0x3; + val = ia64_cmpxchg4_acq(lock, new, old); + } while (unlikely (val != old)); + return old & 0x1; +} + +#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \ + ((Acq) = ia64_acpi_acquire_global_lock(&facs->global_lock)) + +#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \ + ((Acq) = ia64_acpi_release_global_lock(&facs->global_lock)) + +#define acpi_disabled 0 /* ACPI always enabled on IA64 */ +#define acpi_noirq 0 /* ACPI always enabled on IA64 */ +#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */ +#define acpi_strict 1 /* no ACPI spec workarounds on IA64 */ +#define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */ +static inline void disable_acpi(void) { } + +const char *acpi_get_sysname (void); +int acpi_request_vector (u32 int_type); +int acpi_gsi_to_irq (u32 gsi, unsigned int *irq); + +/* routines for saving/restoring kernel state */ +extern int acpi_save_state_mem(void); +extern void acpi_restore_state_mem(void); +extern unsigned long acpi_wakeup_address; + +/* + * Record the cpei override flag and current logical cpu. This is + * useful for CPU removal. + */ +extern unsigned int can_cpei_retarget(void); +extern unsigned int is_cpu_cpei_target(unsigned int cpu); +extern void set_cpei_target_cpu(unsigned int cpu); +extern unsigned int get_cpei_target_cpu(void); +extern void prefill_possible_map(void); +#ifdef CONFIG_ACPI_HOTPLUG_CPU +extern int additional_cpus; +#else +#define additional_cpus 0 +#endif + +#ifdef CONFIG_ACPI_NUMA +#if MAX_NUMNODES > 256 +#define MAX_PXM_DOMAINS MAX_NUMNODES +#else +#define MAX_PXM_DOMAINS (256) +#endif +extern int __devinitdata pxm_to_nid_map[MAX_PXM_DOMAINS]; +extern int __initdata nid_to_pxm_map[MAX_NUMNODES]; +#endif + +#define acpi_unlazy_tlb(x) + +#ifdef CONFIG_ACPI_NUMA +extern cpumask_t early_cpu_possible_map; +#define for_each_possible_early_cpu(cpu) \ + for_each_cpu_mask((cpu), early_cpu_possible_map) + +static inline void per_cpu_scan_finalize(int min_cpus, int reserve_cpus) +{ + int low_cpu, high_cpu; + int cpu; + int next_nid = 0; + + low_cpu = cpus_weight(early_cpu_possible_map); + + high_cpu = max(low_cpu, min_cpus); + high_cpu = min(high_cpu + reserve_cpus, NR_CPUS); + + for (cpu = low_cpu; cpu < high_cpu; cpu++) { + cpu_set(cpu, early_cpu_possible_map); + if (node_cpuid[cpu].nid == NUMA_NO_NODE) { + node_cpuid[cpu].nid = next_nid; + next_nid++; + if (next_nid >= num_online_nodes()) + next_nid = 0; + } + } +} +#endif /* CONFIG_ACPI_NUMA */ + +#endif /*__KERNEL__*/ + +#endif /*_ASM_ACPI_H*/ diff --git a/arch/ia64/include/asm/agp.h b/arch/ia64/include/asm/agp.h new file mode 100644 index 000000000000..c11fdd8ab4d7 --- /dev/null +++ b/arch/ia64/include/asm/agp.h @@ -0,0 +1,30 @@ +#ifndef _ASM_IA64_AGP_H +#define _ASM_IA64_AGP_H + +/* + * IA-64 specific AGP definitions. + * + * Copyright (C) 2002-2003 Hewlett-Packard Co + * David Mosberger-Tang + */ + +/* + * To avoid memory-attribute aliasing issues, we require that the AGPGART engine operate + * in coherent mode, which lets us map the AGP memory as normal (write-back) memory + * (unlike x86, where it gets mapped "write-coalescing"). + */ +#define map_page_into_agp(page) /* nothing */ +#define unmap_page_from_agp(page) /* nothing */ +#define flush_agp_cache() mb() + +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + +#endif /* _ASM_IA64_AGP_H */ diff --git a/arch/ia64/include/asm/asmmacro.h b/arch/ia64/include/asm/asmmacro.h new file mode 100644 index 000000000000..c1642fd64029 --- /dev/null +++ b/arch/ia64/include/asm/asmmacro.h @@ -0,0 +1,135 @@ +#ifndef _ASM_IA64_ASMMACRO_H +#define _ASM_IA64_ASMMACRO_H + +/* + * Copyright (C) 2000-2001, 2003-2004 Hewlett-Packard Co + * David Mosberger-Tang + */ + + +#define ENTRY(name) \ + .align 32; \ + .proc name; \ +name: + +#define ENTRY_MIN_ALIGN(name) \ + .align 16; \ + .proc name; \ +name: + +#define GLOBAL_ENTRY(name) \ + .global name; \ + ENTRY(name) + +#define END(name) \ + .endp name + +/* + * Helper macros to make unwind directives more readable: + */ + +/* prologue_gr: */ +#define ASM_UNW_PRLG_RP 0x8 +#define ASM_UNW_PRLG_PFS 0x4 +#define ASM_UNW_PRLG_PSP 0x2 +#define ASM_UNW_PRLG_PR 0x1 +#define ASM_UNW_PRLG_GRSAVE(ninputs) (32+(ninputs)) + +/* + * Helper macros for accessing user memory. + * + * When adding any new .section/.previous entries here, make sure to + * also add it to the DISCARD section in arch/ia64/kernel/gate.lds.S or + * unpleasant things will happen. + */ + + .section "__ex_table", "a" // declare section & section attributes + .previous + +# define EX(y,x...) \ + .xdata4 "__ex_table", 99f-., y-.; \ + [99:] x +# define EXCLR(y,x...) \ + .xdata4 "__ex_table", 99f-., y-.+4; \ + [99:] x + +/* + * Tag MCA recoverable instruction ranges. + */ + + .section "__mca_table", "a" // declare section & section attributes + .previous + +# define MCA_RECOVER_RANGE(y) \ + .xdata4 "__mca_table", y-., 99f-.; \ + [99:] + +/* + * Mark instructions that need a load of a virtual address patched to be + * a load of a physical address. We use this either in critical performance + * path (ivt.S - TLB miss processing) or in places where it might not be + * safe to use a "tpa" instruction (mca_asm.S - error recovery). + */ + .section ".data.patch.vtop", "a" // declare section & section attributes + .previous + +#define LOAD_PHYSICAL(pr, reg, obj) \ +[1:](pr)movl reg = obj; \ + .xdata4 ".data.patch.vtop", 1b-. + +/* + * For now, we always put in the McKinley E9 workaround. On CPUs that don't need it, + * we'll patch out the work-around bundles with NOPs, so their impact is minimal. + */ +#define DO_MCKINLEY_E9_WORKAROUND + +#ifdef DO_MCKINLEY_E9_WORKAROUND + .section ".data.patch.mckinley_e9", "a" + .previous +/* workaround for Itanium 2 Errata 9: */ +# define FSYS_RETURN \ + .xdata4 ".data.patch.mckinley_e9", 1f-.; \ +1:{ .mib; \ + nop.m 0; \ + mov r16=ar.pfs; \ + br.call.sptk.many b7=2f;; \ + }; \ +2:{ .mib; \ + nop.m 0; \ + mov ar.pfs=r16; \ + br.ret.sptk.many b6;; \ + } +#else +# define FSYS_RETURN br.ret.sptk.many b6 +#endif + +/* + * If physical stack register size is different from DEF_NUM_STACK_REG, + * dynamically patch the kernel for correct size. + */ + .section ".data.patch.phys_stack_reg", "a" + .previous +#define LOAD_PHYS_STACK_REG_SIZE(reg) \ +[1:] adds reg=IA64_NUM_PHYS_STACK_REG*8+8,r0; \ + .xdata4 ".data.patch.phys_stack_reg", 1b-. + +/* + * Up until early 2004, use of .align within a function caused bad unwind info. + * TEXT_ALIGN(n) expands into ".align n" if a fixed GAS is available or into nothing + * otherwise. + */ +#ifdef HAVE_WORKING_TEXT_ALIGN +# define TEXT_ALIGN(n) .align n +#else +# define TEXT_ALIGN(n) +#endif + +#ifdef HAVE_SERIALIZE_DIRECTIVE +# define dv_serialize_data .serialize.data +# define dv_serialize_instruction .serialize.instruction +#else +# define dv_serialize_data +# define dv_serialize_instruction +#endif + +#endif /* _ASM_IA64_ASMMACRO_H */ diff --git a/arch/ia64/include/asm/atomic.h b/arch/ia64/include/asm/atomic.h new file mode 100644 index 000000000000..50c2b83fd5a0 --- /dev/null +++ b/arch/ia64/include/asm/atomic.h @@ -0,0 +1,226 @@ +#ifndef _ASM_IA64_ATOMIC_H +#define _ASM_IA64_ATOMIC_H + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + * + * NOTE: don't mess with the types below! The "unsigned long" and + * "int" types were carefully placed so as to ensure proper operation + * of the macros. + * + * Copyright (C) 1998, 1999, 2002-2003 Hewlett-Packard Co + * David Mosberger-Tang + */ +#include + +#include +#include + +/* + * On IA-64, counter must always be volatile to ensure that that the + * memory accesses are ordered. + */ +typedef struct { volatile __s32 counter; } atomic_t; +typedef struct { volatile __s64 counter; } atomic64_t; + +#define ATOMIC_INIT(i) ((atomic_t) { (i) }) +#define ATOMIC64_INIT(i) ((atomic64_t) { (i) }) + +#define atomic_read(v) ((v)->counter) +#define atomic64_read(v) ((v)->counter) + +#define atomic_set(v,i) (((v)->counter) = (i)) +#define atomic64_set(v,i) (((v)->counter) = (i)) + +static __inline__ int +ia64_atomic_add (int i, atomic_t *v) +{ + __s32 old, new; + CMPXCHG_BUGCHECK_DECL + + do { + CMPXCHG_BUGCHECK(v); + old = atomic_read(v); + new = old + i; + } while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old); + return new; +} + +static __inline__ int +ia64_atomic64_add (__s64 i, atomic64_t *v) +{ + __s64 old, new; + CMPXCHG_BUGCHECK_DECL + + do { + CMPXCHG_BUGCHECK(v); + old = atomic64_read(v); + new = old + i; + } while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old); + return new; +} + +static __inline__ int +ia64_atomic_sub (int i, atomic_t *v) +{ + __s32 old, new; + CMPXCHG_BUGCHECK_DECL + + do { + CMPXCHG_BUGCHECK(v); + old = atomic_read(v); + new = old - i; + } while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old); + return new; +} + +static __inline__ int +ia64_atomic64_sub (__s64 i, atomic64_t *v) +{ + __s64 old, new; + CMPXCHG_BUGCHECK_DECL + + do { + CMPXCHG_BUGCHECK(v); + old = atomic64_read(v); + new = old - i; + } while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old); + return new; +} + +#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new)) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +#define atomic64_cmpxchg(v, old, new) \ + (cmpxchg(&((v)->counter), old, new)) +#define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) + +static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + c = atomic_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) +{ + long c, old; + c = atomic64_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic64_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) + +#define atomic_add_return(i,v) \ +({ \ + int __ia64_aar_i = (i); \ + (__builtin_constant_p(i) \ + && ( (__ia64_aar_i == 1) || (__ia64_aar_i == 4) \ + || (__ia64_aar_i == 8) || (__ia64_aar_i == 16) \ + || (__ia64_aar_i == -1) || (__ia64_aar_i == -4) \ + || (__ia64_aar_i == -8) || (__ia64_aar_i == -16))) \ + ? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter) \ + : ia64_atomic_add(__ia64_aar_i, v); \ +}) + +#define atomic64_add_return(i,v) \ +({ \ + long __ia64_aar_i = (i); \ + (__builtin_constant_p(i) \ + && ( (__ia64_aar_i == 1) || (__ia64_aar_i == 4) \ + || (__ia64_aar_i == 8) || (__ia64_aar_i == 16) \ + || (__ia64_aar_i == -1) || (__ia64_aar_i == -4) \ + || (__ia64_aar_i == -8) || (__ia64_aar_i == -16))) \ + ? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter) \ + : ia64_atomic64_add(__ia64_aar_i, v); \ +}) + +/* + * Atomically add I to V and return TRUE if the resulting value is + * negative. + */ +static __inline__ int +atomic_add_negative (int i, atomic_t *v) +{ + return atomic_add_return(i, v) < 0; +} + +static __inline__ int +atomic64_add_negative (__s64 i, atomic64_t *v) +{ + return atomic64_add_return(i, v) < 0; +} + +#define atomic_sub_return(i,v) \ +({ \ + int __ia64_asr_i = (i); \ + (__builtin_constant_p(i) \ + && ( (__ia64_asr_i == 1) || (__ia64_asr_i == 4) \ + || (__ia64_asr_i == 8) || (__ia64_asr_i == 16) \ + || (__ia64_asr_i == -1) || (__ia64_asr_i == -4) \ + || (__ia64_asr_i == -8) || (__ia64_asr_i == -16))) \ + ? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter) \ + : ia64_atomic_sub(__ia64_asr_i, v); \ +}) + +#define atomic64_sub_return(i,v) \ +({ \ + long __ia64_asr_i = (i); \ + (__builtin_constant_p(i) \ + && ( (__ia64_asr_i == 1) || (__ia64_asr_i == 4) \ + || (__ia64_asr_i == 8) || (__ia64_asr_i == 16) \ + || (__ia64_asr_i == -1) || (__ia64_asr_i == -4) \ + || (__ia64_asr_i == -8) || (__ia64_asr_i == -16))) \ + ? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter) \ + : ia64_atomic64_sub(__ia64_asr_i, v); \ +}) + +#define atomic_dec_return(v) atomic_sub_return(1, (v)) +#define atomic_inc_return(v) atomic_add_return(1, (v)) +#define atomic64_dec_return(v) atomic64_sub_return(1, (v)) +#define atomic64_inc_return(v) atomic64_add_return(1, (v)) + +#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) +#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) +#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0) +#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0) +#define atomic64_inc_and_test(v) (atomic64_add_return(1, (v)) == 0) + +#define atomic_add(i,v) atomic_add_return((i), (v)) +#define atomic_sub(i,v) atomic_sub_return((i), (v)) +#define atomic_inc(v) atomic_add(1, (v)) +#define atomic_dec(v) atomic_sub(1, (v)) + +#define atomic64_add(i,v) atomic64_add_return((i), (v)) +#define atomic64_sub(i,v) atomic64_sub_return((i), (v)) +#define atomic64_inc(v) atomic64_add(1, (v)) +#define atomic64_dec(v) atomic64_sub(1, (v)) + +/* Atomic operations are already serializing */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include +#endif /* _ASM_IA64_ATOMIC_H */ diff --git a/arch/ia64/include/asm/auxvec.h b/arch/ia64/include/asm/auxvec.h new file mode 100644 index 000000000000..23cebe5685b9 --- /dev/null +++ b/arch/ia64/include/asm/auxvec.h @@ -0,0 +1,11 @@ +#ifndef _ASM_IA64_AUXVEC_H +#define _ASM_IA64_AUXVEC_H + +/* + * Architecture-neutral AT_ values are in the range 0-17. Leave some room for more of + * them, start the architecture-specific ones at 32. + */ +#define AT_SYSINFO 32 +#define AT_SYSINFO_EHDR 33 + +#endif /* _ASM_IA64_AUXVEC_H */ diff --git a/arch/ia64/include/asm/bitops.h b/arch/ia64/include/asm/bitops.h new file mode 100644 index 000000000000..e2ca80037335 --- /dev/null +++ b/arch/ia64/include/asm/bitops.h @@ -0,0 +1,468 @@ +#ifndef _ASM_IA64_BITOPS_H +#define _ASM_IA64_BITOPS_H + +/* + * Copyright (C) 1998-2003 Hewlett-Packard Co + * David Mosberger-Tang + * + * 02/06/02 find_next_bit() and find_first_bit() added from Erich Focht's ia64 + * O(1) scheduler patch + */ + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#include +#include +#include + +/** + * set_bit - Atomically set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * This function is atomic and may not be reordered. See __set_bit() + * if you do not require the atomic guarantees. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + * + * The address must be (at least) "long" aligned. + * Note that there are driver (e.g., eepro100) which use these operations to + * operate on hw-defined data-structures, so we can't easily change these + * operations to force a bigger alignment. + * + * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). + */ +static __inline__ void +set_bit (int nr, volatile void *addr) +{ + __u32 bit, old, new; + volatile __u32 *m; + CMPXCHG_BUGCHECK_DECL + + m = (volatile __u32 *) addr + (nr >> 5); + bit = 1 << (nr & 31); + do { + CMPXCHG_BUGCHECK(m); + old = *m; + new = old | bit; + } while (cmpxchg_acq(m, old, new) != old); +} + +/** + * __set_bit - Set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * Unlike set_bit(), this function is non-atomic and may be reordered. + * If it's called on the same region of memory simultaneously, the effect + * may be that only one operation succeeds. + */ +static __inline__ void +__set_bit (int nr, volatile void *addr) +{ + *((__u32 *) addr + (nr >> 5)) |= (1 << (nr & 31)); +} + +/* + * clear_bit() has "acquire" semantics. + */ +#define smp_mb__before_clear_bit() smp_mb() +#define smp_mb__after_clear_bit() do { /* skip */; } while (0) + +/** + * clear_bit - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and may not be reordered. However, it does + * not contain a memory barrier, so if it is used for locking purposes, + * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * in order to ensure changes are visible on other processors. + */ +static __inline__ void +clear_bit (int nr, volatile void *addr) +{ + __u32 mask, old, new; + volatile __u32 *m; + CMPXCHG_BUGCHECK_DECL + + m = (volatile __u32 *) addr + (nr >> 5); + mask = ~(1 << (nr & 31)); + do { + CMPXCHG_BUGCHECK(m); + old = *m; + new = old & mask; + } while (cmpxchg_acq(m, old, new) != old); +} + +/** + * clear_bit_unlock - Clears a bit in memory with release + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit_unlock() is atomic and may not be reordered. It does + * contain a memory barrier suitable for unlock type operations. + */ +static __inline__ void +clear_bit_unlock (int nr, volatile void *addr) +{ + __u32 mask, old, new; + volatile __u32 *m; + CMPXCHG_BUGCHECK_DECL + + m = (volatile __u32 *) addr + (nr >> 5); + mask = ~(1 << (nr & 31)); + do { + CMPXCHG_BUGCHECK(m); + old = *m; + new = old & mask; + } while (cmpxchg_rel(m, old, new) != old); +} + +/** + * __clear_bit_unlock - Non-atomically clears a bit in memory with release + * @nr: Bit to clear + * @addr: Address to start counting from + * + * Similarly to clear_bit_unlock, the implementation uses a store + * with release semantics. See also __raw_spin_unlock(). + */ +static __inline__ void +__clear_bit_unlock(int nr, void *addr) +{ + __u32 * const m = (__u32 *) addr + (nr >> 5); + __u32 const new = *m & ~(1 << (nr & 31)); + + ia64_st4_rel_nta(m, new); +} + +/** + * __clear_bit - Clears a bit in memory (non-atomic version) + * @nr: the bit to clear + * @addr: the address to start counting from + * + * Unlike clear_bit(), this function is non-atomic and may be reordered. + * If it's called on the same region of memory simultaneously, the effect + * may be that only one operation succeeds. + */ +static __inline__ void +__clear_bit (int nr, volatile void *addr) +{ + *((__u32 *) addr + (nr >> 5)) &= ~(1 << (nr & 31)); +} + +/** + * change_bit - Toggle a bit in memory + * @nr: Bit to toggle + * @addr: Address to start counting from + * + * change_bit() is atomic and may not be reordered. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static __inline__ void +change_bit (int nr, volatile void *addr) +{ + __u32 bit, old, new; + volatile __u32 *m; + CMPXCHG_BUGCHECK_DECL + + m = (volatile __u32 *) addr + (nr >> 5); + bit = (1 << (nr & 31)); + do { + CMPXCHG_BUGCHECK(m); + old = *m; + new = old ^ bit; + } while (cmpxchg_acq(m, old, new) != old); +} + +/** + * __change_bit - Toggle a bit in memory + * @nr: the bit to toggle + * @addr: the address to start counting from + * + * Unlike change_bit(), this function is non-atomic and may be reordered. + * If it's called on the same region of memory simultaneously, the effect + * may be that only one operation succeeds. + */ +static __inline__ void +__change_bit (int nr, volatile void *addr) +{ + *((__u32 *) addr + (nr >> 5)) ^= (1 << (nr & 31)); +} + +/** + * test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies the acquisition side of the memory barrier. + */ +static __inline__ int +test_and_set_bit (int nr, volatile void *addr) +{ + __u32 bit, old, new; + volatile __u32 *m; + CMPXCHG_BUGCHECK_DECL + + m = (volatile __u32 *) addr + (nr >> 5); + bit = 1 << (nr & 31); + do { + CMPXCHG_BUGCHECK(m); + old = *m; + new = old | bit; + } while (cmpxchg_acq(m, old, new) != old); + return (old & bit) != 0; +} + +/** + * test_and_set_bit_lock - Set a bit and return its old value for lock + * @nr: Bit to set + * @addr: Address to count from + * + * This is the same as test_and_set_bit on ia64 + */ +#define test_and_set_bit_lock test_and_set_bit + +/** + * __test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is non-atomic and can be reordered. + * If two examples of this operation race, one can appear to succeed + * but actually fail. You must protect multiple accesses with a lock. + */ +static __inline__ int +__test_and_set_bit (int nr, volatile void *addr) +{ + __u32 *p = (__u32 *) addr + (nr >> 5); + __u32 m = 1 << (nr & 31); + int oldbitset = (*p & m) != 0; + + *p |= m; + return oldbitset; +} + +/** + * test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to clear + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies the acquisition side of the memory barrier. + */ +static __inline__ int +test_and_clear_bit (int nr, volatile void *addr) +{ + __u32 mask, old, new; + volatile __u32 *m; + CMPXCHG_BUGCHECK_DECL + + m = (volatile __u32 *) addr + (nr >> 5); + mask = ~(1 << (nr & 31)); + do { + CMPXCHG_BUGCHECK(m); + old = *m; + new = old & mask; + } while (cmpxchg_acq(m, old, new) != old); + return (old & ~mask) != 0; +} + +/** + * __test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to clear + * @addr: Address to count from + * + * This operation is non-atomic and can be reordered. + * If two examples of this operation race, one can appear to succeed + * but actually fail. You must protect multiple accesses with a lock. + */ +static __inline__ int +__test_and_clear_bit(int nr, volatile void * addr) +{ + __u32 *p = (__u32 *) addr + (nr >> 5); + __u32 m = 1 << (nr & 31); + int oldbitset = *p & m; + + *p &= ~m; + return oldbitset; +} + +/** + * test_and_change_bit - Change a bit and return its old value + * @nr: Bit to change + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies the acquisition side of the memory barrier. + */ +static __inline__ int +test_and_change_bit (int nr, volatile void *addr) +{ + __u32 bit, old, new; + volatile __u32 *m; + CMPXCHG_BUGCHECK_DECL + + m = (volatile __u32 *) addr + (nr >> 5); + bit = (1 << (nr & 31)); + do { + CMPXCHG_BUGCHECK(m); + old = *m; + new = old ^ bit; + } while (cmpxchg_acq(m, old, new) != old); + return (old & bit) != 0; +} + +/** + * __test_and_change_bit - Change a bit and return its old value + * @nr: Bit to change + * @addr: Address to count from + * + * This operation is non-atomic and can be reordered. + */ +static __inline__ int +__test_and_change_bit (int nr, void *addr) +{ + __u32 old, bit = (1 << (nr & 31)); + __u32 *m = (__u32 *) addr + (nr >> 5); + + old = *m; + *m = old ^ bit; + return (old & bit) != 0; +} + +static __inline__ int +test_bit (int nr, const volatile void *addr) +{ + return 1 & (((const volatile __u32 *) addr)[nr >> 5] >> (nr & 31)); +} + +/** + * ffz - find the first zero bit in a long word + * @x: The long word to find the bit in + * + * Returns the bit-number (0..63) of the first (least significant) zero bit. + * Undefined if no zero exists, so code should check against ~0UL first... + */ +static inline unsigned long +ffz (unsigned long x) +{ + unsigned long result; + + result = ia64_popcnt(x & (~x - 1)); + return result; +} + +/** + * __ffs - find first bit in word. + * @x: The word to search + * + * Undefined if no bit exists, so code should check against 0 first. + */ +static __inline__ unsigned long +__ffs (unsigned long x) +{ + unsigned long result; + + result = ia64_popcnt((x-1) & ~x); + return result; +} + +#ifdef __KERNEL__ + +/* + * Return bit number of last (most-significant) bit set. Undefined + * for x==0. Bits are numbered from 0..63 (e.g., ia64_fls(9) == 3). + */ +static inline unsigned long +ia64_fls (unsigned long x) +{ + long double d = x; + long exp; + + exp = ia64_getf_exp(d); + return exp - 0xffff; +} + +/* + * Find the last (most significant) bit set. Returns 0 for x==0 and + * bits are numbered from 1..32 (e.g., fls(9) == 4). + */ +static inline int +fls (int t) +{ + unsigned long x = t & 0xffffffffu; + + if (!x) + return 0; + x |= x >> 1; + x |= x >> 2; + x |= x >> 4; + x |= x >> 8; + x |= x >> 16; + return ia64_popcnt(x); +} + +/* + * Find the last (most significant) bit set. Undefined for x==0. + * Bits are numbered from 0..63 (e.g., __fls(9) == 3). + */ +static inline unsigned long +__fls (unsigned long x) +{ + x |= x >> 1; + x |= x >> 2; + x |= x >> 4; + x |= x >> 8; + x |= x >> 16; + x |= x >> 32; + return ia64_popcnt(x) - 1; +} + +#include + +/* + * ffs: find first bit set. This is defined the same way as the libc and + * compiler builtin ffs routines, therefore differs in spirit from the above + * ffz (man ffs): it operates on "int" values only and the result value is the + * bit number + 1. ffs(0) is defined to return zero. + */ +#define ffs(x) __builtin_ffs(x) + +/* + * hweightN: returns the hamming weight (i.e. the number + * of bits set) of a N-bit word + */ +static __inline__ unsigned long +hweight64 (unsigned long x) +{ + unsigned long result; + result = ia64_popcnt(x); + return result; +} + +#define hweight32(x) (unsigned int) hweight64((x) & 0xfffffffful) +#define hweight16(x) (unsigned int) hweight64((x) & 0xfffful) +#define hweight8(x) (unsigned int) hweight64((x) & 0xfful) + +#endif /* __KERNEL__ */ + +#include + +#ifdef __KERNEL__ + +#include + +#define ext2_set_bit_atomic(l,n,a) test_and_set_bit(n,a) +#define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a) + +#include +#include + +#endif /* __KERNEL__ */ + +#endif /* _ASM_IA64_BITOPS_H */ diff --git a/arch/ia64/include/asm/break.h b/arch/ia64/include/asm/break.h new file mode 100644 index 000000000000..f03402039896 --- /dev/null +++ b/arch/ia64/include/asm/break.h @@ -0,0 +1,23 @@ +#ifndef _ASM_IA64_BREAK_H +#define _ASM_IA64_BREAK_H + +/* + * IA-64 Linux break numbers. + * + * Copyright (C) 1999 Hewlett-Packard Co + * Copyright (C) 1999 David Mosberger-Tang + */ + +/* + * OS-specific debug break numbers: + */ +#define __IA64_BREAK_KDB 0x80100 +#define __IA64_BREAK_KPROBE 0x81000 /* .. 0x81fff */ +#define __IA64_BREAK_JPROBE 0x82000 + +/* + * OS-specific break numbers: + */ +#define __IA64_BREAK_SYSCALL 0x100000 + +#endif /* _ASM_IA64_BREAK_H */ diff --git a/arch/ia64/include/asm/bug.h b/arch/ia64/include/asm/bug.h new file mode 100644 index 000000000000..823616b5020b --- /dev/null +++ b/arch/ia64/include/asm/bug.h @@ -0,0 +1,14 @@ +#ifndef _ASM_IA64_BUG_H +#define _ASM_IA64_BUG_H + +#ifdef CONFIG_BUG +#define ia64_abort() __builtin_trap() +#define BUG() do { printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); ia64_abort(); } while (0) + +/* should this BUG be made generic? */ +#define HAVE_ARCH_BUG +#endif + +#include + +#endif diff --git a/arch/ia64/include/asm/bugs.h b/arch/ia64/include/asm/bugs.h new file mode 100644 index 000000000000..433523e3b2ed --- /dev/null +++ b/arch/ia64/include/asm/bugs.h @@ -0,0 +1,19 @@ +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + * + * Based on . + * + * Modified 1998, 1999, 2003 + * David Mosberger-Tang , Hewlett-Packard Co. + */ +#ifndef _ASM_IA64_BUGS_H +#define _ASM_IA64_BUGS_H + +#include + +extern void check_bugs (void); + +#endif /* _ASM_IA64_BUGS_H */ diff --git a/arch/ia64/include/asm/byteorder.h b/arch/ia64/include/asm/byteorder.h new file mode 100644 index 000000000000..69bd41d7c26e --- /dev/null +++ b/arch/ia64/include/asm/byteorder.h @@ -0,0 +1,42 @@ +#ifndef _ASM_IA64_BYTEORDER_H +#define _ASM_IA64_BYTEORDER_H + +/* + * Modified 1998, 1999 + * David Mosberger-Tang , Hewlett-Packard Co. + */ + +#include +#include +#include + +static __inline__ __attribute_const__ __u64 +__ia64_swab64 (__u64 x) +{ + __u64 result; + + result = ia64_mux1(x, ia64_mux1_rev); + return result; +} + +static __inline__ __attribute_const__ __u32 +__ia64_swab32 (__u32 x) +{ + return __ia64_swab64(x) >> 32; +} + +static __inline__ __attribute_const__ __u16 +__ia64_swab16(__u16 x) +{ + return __ia64_swab64(x) >> 48; +} + +#define __arch__swab64(x) __ia64_swab64(x) +#define __arch__swab32(x) __ia64_swab32(x) +#define __arch__swab16(x) __ia64_swab16(x) + +#define __BYTEORDER_HAS_U64__ + +#include + +#endif /* _ASM_IA64_BYTEORDER_H */ diff --git a/arch/ia64/include/asm/cache.h b/arch/ia64/include/asm/cache.h new file mode 100644 index 000000000000..e7482bd628ff --- /dev/null +++ b/arch/ia64/include/asm/cache.h @@ -0,0 +1,29 @@ +#ifndef _ASM_IA64_CACHE_H +#define _ASM_IA64_CACHE_H + + +/* + * Copyright (C) 1998-2000 Hewlett-Packard Co + * David Mosberger-Tang + */ + +/* Bytes per L1 (data) cache line. */ +#define L1_CACHE_SHIFT CONFIG_IA64_L1_CACHE_SHIFT +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#ifdef CONFIG_SMP +# define SMP_CACHE_SHIFT L1_CACHE_SHIFT +# define SMP_CACHE_BYTES L1_CACHE_BYTES +#else + /* + * The "aligned" directive can only _increase_ alignment, so this is + * safe and provides an easy way to avoid wasting space on a + * uni-processor: + */ +# define SMP_CACHE_SHIFT 3 +# define SMP_CACHE_BYTES (1 << 3) +#endif + +#define __read_mostly __attribute__((__section__(".data.read_mostly"))) + +#endif /* _ASM_IA64_CACHE_H */ diff --git a/arch/ia64/include/asm/cacheflush.h b/arch/ia64/include/asm/cacheflush.h new file mode 100644 index 000000000000..afcfbda76e20 --- /dev/null +++ b/arch/ia64/include/asm/cacheflush.h @@ -0,0 +1,51 @@ +#ifndef _ASM_IA64_CACHEFLUSH_H +#define _ASM_IA64_CACHEFLUSH_H + +/* + * Copyright (C) 2002 Hewlett-Packard Co + * David Mosberger-Tang + */ + +#include +#include + +#include + +/* + * Cache flushing routines. This is the kind of stuff that can be very expensive, so try + * to avoid them whenever possible. + */ + +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_icache_page(vma,page) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +#define flush_dcache_page(page) \ +do { \ + clear_bit(PG_arch_1, &(page)->flags); \ +} while (0) + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +extern void flush_icache_range (unsigned long start, unsigned long end); + +#define flush_icache_user_range(vma, page, user_addr, len) \ +do { \ + unsigned long _addr = (unsigned long) page_address(page) + ((user_addr) & ~PAGE_MASK); \ + flush_icache_range(_addr, _addr + (len)); \ +} while (0) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ +do { memcpy(dst, src, len); \ + flush_icache_user_range(vma, page, vaddr, len); \ +} while (0) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +#endif /* _ASM_IA64_CACHEFLUSH_H */ diff --git a/arch/ia64/include/asm/checksum.h b/arch/ia64/include/asm/checksum.h new file mode 100644 index 000000000000..97af155057e4 --- /dev/null +++ b/arch/ia64/include/asm/checksum.h @@ -0,0 +1,79 @@ +#ifndef _ASM_IA64_CHECKSUM_H +#define _ASM_IA64_CHECKSUM_H + +/* + * Modified 1998, 1999 + * David Mosberger-Tang , Hewlett-Packard Co + */ + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); + +/* + * Computes the checksum of the TCP/UDP pseudo-header returns a 16-bit + * checksum, already complemented + */ +extern __sum16 csum_tcpudp_magic (__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum); + +extern __wsum csum_tcpudp_nofold (__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum); + +/* + * Computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +extern __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * Same as csum_partial, but copies from src while it checksums. + * + * Here it is even more important to align src and dst on a 32-bit (or + * even better 64-bit) boundary. + */ +extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, + int *errp); + +extern __wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum); + +/* + * This routine is used for miscellaneous IP-like checksums, mainly in + * icmp.c + */ +extern __sum16 ip_compute_csum(const void *buff, int len); + +/* + * Fold a partial checksum without adding pseudo headers. + */ +static inline __sum16 csum_fold(__wsum csum) +{ + u32 sum = (__force u32)csum; + sum = (sum & 0xffff) + (sum >> 16); + sum = (sum & 0xffff) + (sum >> 16); + return (__force __sum16)~sum; +} + +#define _HAVE_ARCH_IPV6_CSUM 1 +struct in6_addr; +extern __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, __u32 len, unsigned short proto, + __wsum csum); + +#endif /* _ASM_IA64_CHECKSUM_H */ diff --git a/arch/ia64/include/asm/compat.h b/arch/ia64/include/asm/compat.h new file mode 100644 index 000000000000..dfcf75b8426d --- /dev/null +++ b/arch/ia64/include/asm/compat.h @@ -0,0 +1,207 @@ +#ifndef _ASM_IA64_COMPAT_H +#define _ASM_IA64_COMPAT_H +/* + * Architecture specific compatibility types + */ +#include + +#define COMPAT_USER_HZ 100 + +typedef u32 compat_size_t; +typedef s32 compat_ssize_t; +typedef s32 compat_time_t; +typedef s32 compat_clock_t; +typedef s32 compat_key_t; +typedef s32 compat_pid_t; +typedef u16 __compat_uid_t; +typedef u16 __compat_gid_t; +typedef u32 __compat_uid32_t; +typedef u32 __compat_gid32_t; +typedef u16 compat_mode_t; +typedef u32 compat_ino_t; +typedef u16 compat_dev_t; +typedef s32 compat_off_t; +typedef s64 compat_loff_t; +typedef u16 compat_nlink_t; +typedef u16 compat_ipc_pid_t; +typedef s32 compat_daddr_t; +typedef u32 compat_caddr_t; +typedef __kernel_fsid_t compat_fsid_t; +typedef s32 compat_timer_t; + +typedef s32 compat_int_t; +typedef s32 compat_long_t; +typedef s64 __attribute__((aligned(4))) compat_s64; +typedef u32 compat_uint_t; +typedef u32 compat_ulong_t; +typedef u64 __attribute__((aligned(4))) compat_u64; + +struct compat_timespec { + compat_time_t tv_sec; + s32 tv_nsec; +}; + +struct compat_timeval { + compat_time_t tv_sec; + s32 tv_usec; +}; + +struct compat_stat { + compat_dev_t st_dev; + u16 __pad1; + compat_ino_t st_ino; + compat_mode_t st_mode; + compat_nlink_t st_nlink; + __compat_uid_t st_uid; + __compat_gid_t st_gid; + compat_dev_t st_rdev; + u16 __pad2; + u32 st_size; + u32 st_blksize; + u32 st_blocks; + u32 st_atime; + u32 st_atime_nsec; + u32 st_mtime; + u32 st_mtime_nsec; + u32 st_ctime; + u32 st_ctime_nsec; + u32 __unused4; + u32 __unused5; +}; + +struct compat_flock { + short l_type; + short l_whence; + compat_off_t l_start; + compat_off_t l_len; + compat_pid_t l_pid; +}; + +#define F_GETLK64 12 +#define F_SETLK64 13 +#define F_SETLKW64 14 + +/* + * IA32 uses 4 byte alignment for 64 bit quantities, + * so we need to pack this structure. + */ +struct compat_flock64 { + short l_type; + short l_whence; + compat_loff_t l_start; + compat_loff_t l_len; + compat_pid_t l_pid; +} __attribute__((packed)); + +struct compat_statfs { + int f_type; + int f_bsize; + int f_blocks; + int f_bfree; + int f_bavail; + int f_files; + int f_ffree; + compat_fsid_t f_fsid; + int f_namelen; /* SunOS ignores this field. */ + int f_frsize; + int f_spare[5]; +}; + +#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff +#define COMPAT_RLIM_INFINITY 0xffffffff + +typedef u32 compat_old_sigset_t; /* at least 32 bits */ + +#define _COMPAT_NSIG 64 +#define _COMPAT_NSIG_BPW 32 + +typedef u32 compat_sigset_word; + +#define COMPAT_OFF_T_MAX 0x7fffffff +#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL + +struct compat_ipc64_perm { + compat_key_t key; + __compat_uid32_t uid; + __compat_gid32_t gid; + __compat_uid32_t cuid; + __compat_gid32_t cgid; + unsigned short mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + compat_ulong_t unused1; + compat_ulong_t unused2; +}; + +struct compat_semid64_ds { + struct compat_ipc64_perm sem_perm; + compat_time_t sem_otime; + compat_ulong_t __unused1; + compat_time_t sem_ctime; + compat_ulong_t __unused2; + compat_ulong_t sem_nsems; + compat_ulong_t __unused3; + compat_ulong_t __unused4; +}; + +struct compat_msqid64_ds { + struct compat_ipc64_perm msg_perm; + compat_time_t msg_stime; + compat_ulong_t __unused1; + compat_time_t msg_rtime; + compat_ulong_t __unused2; + compat_time_t msg_ctime; + compat_ulong_t __unused3; + compat_ulong_t msg_cbytes; + compat_ulong_t msg_qnum; + compat_ulong_t msg_qbytes; + compat_pid_t msg_lspid; + compat_pid_t msg_lrpid; + compat_ulong_t __unused4; + compat_ulong_t __unused5; +}; + +struct compat_shmid64_ds { + struct compat_ipc64_perm shm_perm; + compat_size_t shm_segsz; + compat_time_t shm_atime; + compat_ulong_t __unused1; + compat_time_t shm_dtime; + compat_ulong_t __unused2; + compat_time_t shm_ctime; + compat_ulong_t __unused3; + compat_pid_t shm_cpid; + compat_pid_t shm_lpid; + compat_ulong_t shm_nattch; + compat_ulong_t __unused4; + compat_ulong_t __unused5; +}; + +/* + * A pointer passed in from user mode. This should not be used for syscall parameters, + * just declare them as pointers because the syscall entry code will have appropriately + * converted them already. + */ +typedef u32 compat_uptr_t; + +static inline void __user * +compat_ptr (compat_uptr_t uptr) +{ + return (void __user *) (unsigned long) uptr; +} + +static inline compat_uptr_t +ptr_to_compat(void __user *uptr) +{ + return (u32)(unsigned long)uptr; +} + +static __inline__ void __user * +compat_alloc_user_space (long len) +{ + struct pt_regs *regs = task_pt_regs(current); + return (void __user *) (((regs->r12 & 0xffffffff) & -16) - len); +} + +#endif /* _ASM_IA64_COMPAT_H */ diff --git a/arch/ia64/include/asm/cpu.h b/arch/ia64/include/asm/cpu.h new file mode 100644 index 000000000000..fcca30b9f110 --- /dev/null +++ b/arch/ia64/include/asm/cpu.h @@ -0,0 +1,22 @@ +#ifndef _ASM_IA64_CPU_H_ +#define _ASM_IA64_CPU_H_ + +#include +#include +#include +#include + +struct ia64_cpu { + struct cpu cpu; +}; + +DECLARE_PER_CPU(struct ia64_cpu, cpu_devices); + +DECLARE_PER_CPU(int, cpu_state); + +#ifdef CONFIG_HOTPLUG_CPU +extern int arch_register_cpu(int num); +extern void arch_unregister_cpu(int); +#endif + +#endif /* _ASM_IA64_CPU_H_ */ diff --git a/arch/ia64/include/asm/cputime.h b/arch/ia64/include/asm/cputime.h new file mode 100644 index 000000000000..d20b998cb91d --- /dev/null +++ b/arch/ia64/include/asm/cputime.h @@ -0,0 +1,109 @@ +/* + * Definitions for measuring cputime on ia64 machines. + * + * Based on . + * + * Copyright (C) 2007 FUJITSU LIMITED + * Copyright (C) 2007 Hidetoshi Seto + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in nsec. + * Otherwise we measure cpu time in jiffies using the generic definitions. + */ + +#ifndef __IA64_CPUTIME_H +#define __IA64_CPUTIME_H + +#ifndef CONFIG_VIRT_CPU_ACCOUNTING +#include +#else + +#include +#include +#include + +typedef u64 cputime_t; +typedef u64 cputime64_t; + +#define cputime_zero ((cputime_t)0) +#define cputime_max ((~((cputime_t)0) >> 1) - 1) +#define cputime_add(__a, __b) ((__a) + (__b)) +#define cputime_sub(__a, __b) ((__a) - (__b)) +#define cputime_div(__a, __n) ((__a) / (__n)) +#define cputime_halve(__a) ((__a) >> 1) +#define cputime_eq(__a, __b) ((__a) == (__b)) +#define cputime_gt(__a, __b) ((__a) > (__b)) +#define cputime_ge(__a, __b) ((__a) >= (__b)) +#define cputime_lt(__a, __b) ((__a) < (__b)) +#define cputime_le(__a, __b) ((__a) <= (__b)) + +#define cputime64_zero ((cputime64_t)0) +#define cputime64_add(__a, __b) ((__a) + (__b)) +#define cputime64_sub(__a, __b) ((__a) - (__b)) +#define cputime_to_cputime64(__ct) (__ct) + +/* + * Convert cputime <-> jiffies (HZ) + */ +#define cputime_to_jiffies(__ct) ((__ct) / (NSEC_PER_SEC / HZ)) +#define jiffies_to_cputime(__jif) ((__jif) * (NSEC_PER_SEC / HZ)) +#define cputime64_to_jiffies64(__ct) ((__ct) / (NSEC_PER_SEC / HZ)) +#define jiffies64_to_cputime64(__jif) ((__jif) * (NSEC_PER_SEC / HZ)) + +/* + * Convert cputime <-> milliseconds + */ +#define cputime_to_msecs(__ct) ((__ct) / NSEC_PER_MSEC) +#define msecs_to_cputime(__msecs) ((__msecs) * NSEC_PER_MSEC) + +/* + * Convert cputime <-> seconds + */ +#define cputime_to_secs(__ct) ((__ct) / NSEC_PER_SEC) +#define secs_to_cputime(__secs) ((__secs) * NSEC_PER_SEC) + +/* + * Convert cputime <-> timespec (nsec) + */ +static inline cputime_t timespec_to_cputime(const struct timespec *val) +{ + cputime_t ret = val->tv_sec * NSEC_PER_SEC; + return (ret + val->tv_nsec); +} +static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val) +{ + val->tv_sec = ct / NSEC_PER_SEC; + val->tv_nsec = ct % NSEC_PER_SEC; +} + +/* + * Convert cputime <-> timeval (msec) + */ +static inline cputime_t timeval_to_cputime(struct timeval *val) +{ + cputime_t ret = val->tv_sec * NSEC_PER_SEC; + return (ret + val->tv_usec * NSEC_PER_USEC); +} +static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val) +{ + val->tv_sec = ct / NSEC_PER_SEC; + val->tv_usec = (ct % NSEC_PER_SEC) / NSEC_PER_USEC; +} + +/* + * Convert cputime <-> clock (USER_HZ) + */ +#define cputime_to_clock_t(__ct) ((__ct) / (NSEC_PER_SEC / USER_HZ)) +#define clock_t_to_cputime(__x) ((__x) * (NSEC_PER_SEC / USER_HZ)) + +/* + * Convert cputime64 to clock. + */ +#define cputime64_to_clock_t(__ct) cputime_to_clock_t((cputime_t)__ct) + +#endif /* CONFIG_VIRT_CPU_ACCOUNTING */ +#endif /* __IA64_CPUTIME_H */ diff --git a/arch/ia64/include/asm/current.h b/arch/ia64/include/asm/current.h new file mode 100644 index 000000000000..c659f90fbfd9 --- /dev/null +++ b/arch/ia64/include/asm/current.h @@ -0,0 +1,17 @@ +#ifndef _ASM_IA64_CURRENT_H +#define _ASM_IA64_CURRENT_H + +/* + * Modified 1998-2000 + * David Mosberger-Tang , Hewlett-Packard Co + */ + +#include + +/* + * In kernel mode, thread pointer (r13) is used to point to the current task + * structure. + */ +#define current ((struct task_struct *) ia64_getreg(_IA64_REG_TP)) + +#endif /* _ASM_IA64_CURRENT_H */ diff --git a/arch/ia64/include/asm/cyclone.h b/arch/ia64/include/asm/cyclone.h new file mode 100644 index 000000000000..88f6500e84ab --- /dev/null +++ b/arch/ia64/include/asm/cyclone.h @@ -0,0 +1,15 @@ +#ifndef ASM_IA64_CYCLONE_H +#define ASM_IA64_CYCLONE_H + +#ifdef CONFIG_IA64_CYCLONE +extern int use_cyclone; +extern void __init cyclone_setup(void); +#else /* CONFIG_IA64_CYCLONE */ +#define use_cyclone 0 +static inline void cyclone_setup(void) +{ + printk(KERN_ERR "Cyclone Counter: System not configured" + " w/ CONFIG_IA64_CYCLONE.\n"); +} +#endif /* CONFIG_IA64_CYCLONE */ +#endif /* !ASM_IA64_CYCLONE_H */ diff --git a/arch/ia64/include/asm/delay.h b/arch/ia64/include/asm/delay.h new file mode 100644 index 000000000000..a30a62f235e1 --- /dev/null +++ b/arch/ia64/include/asm/delay.h @@ -0,0 +1,88 @@ +#ifndef _ASM_IA64_DELAY_H +#define _ASM_IA64_DELAY_H + +/* + * Delay routines using a pre-computed "cycles/usec" value. + * + * Copyright (C) 1998, 1999 Hewlett-Packard Co + * David Mosberger-Tang + * Copyright (C) 1999 VA Linux Systems + * Copyright (C) 1999 Walt Drummond + * Copyright (C) 1999 Asit Mallick + * Copyright (C) 1999 Don Dugger + */ + +#include +#include +#include + +#include +#include + +static __inline__ void +ia64_set_itm (unsigned long val) +{ + ia64_setreg(_IA64_REG_CR_ITM, val); + ia64_srlz_d(); +} + +static __inline__ unsigned long +ia64_get_itm (void) +{ + unsigned long result; + + result = ia64_getreg(_IA64_REG_CR_ITM); + ia64_srlz_d(); + return result; +} + +static __inline__ void +ia64_set_itv (unsigned long val) +{ + ia64_setreg(_IA64_REG_CR_ITV, val); + ia64_srlz_d(); +} + +static __inline__ unsigned long +ia64_get_itv (void) +{ + return ia64_getreg(_IA64_REG_CR_ITV); +} + +static __inline__ void +ia64_set_itc (unsigned long val) +{ + ia64_setreg(_IA64_REG_AR_ITC, val); + ia64_srlz_d(); +} + +static __inline__ unsigned long +ia64_get_itc (void) +{ + unsigned long result; + + result = ia64_getreg(_IA64_REG_AR_ITC); + ia64_barrier(); +#ifdef CONFIG_ITANIUM + while (unlikely((__s32) result == -1)) { + result = ia64_getreg(_IA64_REG_AR_ITC); + ia64_barrier(); + } +#endif + return result; +} + +extern void ia64_delay_loop (unsigned long loops); + +static __inline__ void +__delay (unsigned long loops) +{ + if (unlikely(loops < 1)) + return; + + ia64_delay_loop (loops - 1); +} + +extern void udelay (unsigned long usecs); + +#endif /* _ASM_IA64_DELAY_H */ diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h new file mode 100644 index 000000000000..3db6daf7f251 --- /dev/null +++ b/arch/ia64/include/asm/device.h @@ -0,0 +1,15 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#ifndef _ASM_IA64_DEVICE_H +#define _ASM_IA64_DEVICE_H + +struct dev_archdata { +#ifdef CONFIG_ACPI + void *acpi_handle; +#endif +}; + +#endif /* _ASM_IA64_DEVICE_H */ diff --git a/arch/ia64/include/asm/div64.h b/arch/ia64/include/asm/div64.h new file mode 100644 index 000000000000..6cd978cefb28 --- /dev/null +++ b/arch/ia64/include/asm/div64.h @@ -0,0 +1 @@ +#include diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h new file mode 100644 index 000000000000..9f0df9bd46b7 --- /dev/null +++ b/arch/ia64/include/asm/dma-mapping.h @@ -0,0 +1,97 @@ +#ifndef _ASM_IA64_DMA_MAPPING_H +#define _ASM_IA64_DMA_MAPPING_H + +/* + * Copyright (C) 2003-2004 Hewlett-Packard Co + * David Mosberger-Tang + */ +#include +#include + +#define dma_alloc_coherent platform_dma_alloc_coherent +/* coherent mem. is cheap */ +static inline void * +dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle, + gfp_t flag) +{ + return dma_alloc_coherent(dev, size, dma_handle, flag); +} +#define dma_free_coherent platform_dma_free_coherent +static inline void +dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t dma_handle) +{ + dma_free_coherent(dev, size, cpu_addr, dma_handle); +} +#define dma_map_single_attrs platform_dma_map_single_attrs +static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, + size_t size, int dir) +{ + return dma_map_single_attrs(dev, cpu_addr, size, dir, NULL); +} +#define dma_map_sg_attrs platform_dma_map_sg_attrs +static inline int dma_map_sg(struct device *dev, struct scatterlist *sgl, + int nents, int dir) +{ + return dma_map_sg_attrs(dev, sgl, nents, dir, NULL); +} +#define dma_unmap_single_attrs platform_dma_unmap_single_attrs +static inline void dma_unmap_single(struct device *dev, dma_addr_t cpu_addr, + size_t size, int dir) +{ + return dma_unmap_single_attrs(dev, cpu_addr, size, dir, NULL); +} +#define dma_unmap_sg_attrs platform_dma_unmap_sg_attrs +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sgl, + int nents, int dir) +{ + return dma_unmap_sg_attrs(dev, sgl, nents, dir, NULL); +} +#define dma_sync_single_for_cpu platform_dma_sync_single_for_cpu +#define dma_sync_sg_for_cpu platform_dma_sync_sg_for_cpu +#define dma_sync_single_for_device platform_dma_sync_single_for_device +#define dma_sync_sg_for_device platform_dma_sync_sg_for_device +#define dma_mapping_error platform_dma_mapping_error + +#define dma_map_page(dev, pg, off, size, dir) \ + dma_map_single(dev, page_address(pg) + (off), (size), (dir)) +#define dma_unmap_page(dev, dma_addr, size, dir) \ + dma_unmap_single(dev, dma_addr, size, dir) + +/* + * Rest of this file is part of the "Advanced DMA API". Use at your own risk. + * See Documentation/DMA-API.txt for details. + */ + +#define dma_sync_single_range_for_cpu(dev, dma_handle, offset, size, dir) \ + dma_sync_single_for_cpu(dev, dma_handle, size, dir) +#define dma_sync_single_range_for_device(dev, dma_handle, offset, size, dir) \ + dma_sync_single_for_device(dev, dma_handle, size, dir) + +#define dma_supported platform_dma_supported + +static inline int +dma_set_mask (struct device *dev, u64 mask) +{ + if (!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + *dev->dma_mask = mask; + return 0; +} + +extern int dma_get_cache_alignment(void); + +static inline void +dma_cache_sync (struct device *dev, void *vaddr, size_t size, + enum dma_data_direction dir) +{ + /* + * IA-64 is cache-coherent, so this is mostly a no-op. However, we do need to + * ensure that dma_cache_sync() enforces order, hence the mb(). + */ + mb(); +} + +#define dma_is_consistent(d, h) (1) /* all we do is coherent memory... */ + +#endif /* _ASM_IA64_DMA_MAPPING_H */ diff --git a/arch/ia64/include/asm/dma.h b/arch/ia64/include/asm/dma.h new file mode 100644 index 000000000000..4d97f60f1ef5 --- /dev/null +++ b/arch/ia64/include/asm/dma.h @@ -0,0 +1,24 @@ +#ifndef _ASM_IA64_DMA_H +#define _ASM_IA64_DMA_H + +/* + * Copyright (C) 1998-2002 Hewlett-Packard Co + * David Mosberger-Tang + */ + + +#include /* need byte IO */ + +extern unsigned long MAX_DMA_ADDRESS; + +#ifdef CONFIG_PCI + extern int isa_dma_bridge_buggy; +#else +# define isa_dma_bridge_buggy (0) +#endif + +#define free_dma(x) + +void dma_mark_clean(void *addr, size_t size); + +#endif /* _ASM_IA64_DMA_H */ diff --git a/arch/ia64/include/asm/dmi.h b/arch/ia64/include/asm/dmi.h new file mode 100644 index 000000000000..00eb1b130b63 --- /dev/null +++ b/arch/ia64/include/asm/dmi.h @@ -0,0 +1,11 @@ +#ifndef _ASM_DMI_H +#define _ASM_DMI_H 1 + +#include + +/* Use normal IO mappings for DMI */ +#define dmi_ioremap ioremap +#define dmi_iounmap(x,l) iounmap(x) +#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC) + +#endif diff --git a/arch/ia64/include/asm/elf.h b/arch/ia64/include/asm/elf.h new file mode 100644 index 000000000000..5e0c1a6bce8d --- /dev/null +++ b/arch/ia64/include/asm/elf.h @@ -0,0 +1,269 @@ +#ifndef _ASM_IA64_ELF_H +#define _ASM_IA64_ELF_H + +/* + * ELF-specific definitions. + * + * Copyright (C) 1998-1999, 2002-2004 Hewlett-Packard Co + * David Mosberger-Tang + */ + + +#include +#include +#include + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_IA_64) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS64 +#define ELF_DATA ELFDATA2LSB +#define ELF_ARCH EM_IA_64 + +#define USE_ELF_CORE_DUMP +#define CORE_DUMP_USE_REGSET + +/* Least-significant four bits of ELF header's e_flags are OS-specific. The bits are + interpreted as follows by Linux: */ +#define EF_IA_64_LINUX_EXECUTABLE_STACK 0x1 /* is stack (& heap) executable by default? */ + +#define ELF_EXEC_PAGESIZE PAGE_SIZE + +/* + * This is the location that an ET_DYN program is loaded if exec'ed. + * Typical use of this is to invoke "./ld.so someprog" to test out a + * new version of the loader. We need to make sure that it is out of + * the way of the program that it will "exec", and that there is + * sufficient room for the brk. + */ +#define ELF_ET_DYN_BASE (TASK_UNMAPPED_BASE + 0x800000000UL) + +#define PT_IA_64_UNWIND 0x70000001 + +/* IA-64 relocations: */ +#define R_IA64_NONE 0x00 /* none */ +#define R_IA64_IMM14 0x21 /* symbol + addend, add imm14 */ +#define R_IA64_IMM22 0x22 /* symbol + addend, add imm22 */ +#define R_IA64_IMM64 0x23 /* symbol + addend, mov imm64 */ +#define R_IA64_DIR32MSB 0x24 /* symbol + addend, data4 MSB */ +#define R_IA64_DIR32LSB 0x25 /* symbol + addend, data4 LSB */ +#define R_IA64_DIR64MSB 0x26 /* symbol + addend, data8 MSB */ +#define R_IA64_DIR64LSB 0x27 /* symbol + addend, data8 LSB */ +#define R_IA64_GPREL22 0x2a /* @gprel(sym+add), add imm22 */ +#define R_IA64_GPREL64I 0x2b /* @gprel(sym+add), mov imm64 */ +#define R_IA64_GPREL32MSB 0x2c /* @gprel(sym+add), data4 MSB */ +#define R_IA64_GPREL32LSB 0x2d /* @gprel(sym+add), data4 LSB */ +#define R_IA64_GPREL64MSB 0x2e /* @gprel(sym+add), data8 MSB */ +#define R_IA64_GPREL64LSB 0x2f /* @gprel(sym+add), data8 LSB */ +#define R_IA64_LTOFF22 0x32 /* @ltoff(sym+add), add imm22 */ +#define R_IA64_LTOFF64I 0x33 /* @ltoff(sym+add), mov imm64 */ +#define R_IA64_PLTOFF22 0x3a /* @pltoff(sym+add), add imm22 */ +#define R_IA64_PLTOFF64I 0x3b /* @pltoff(sym+add), mov imm64 */ +#define R_IA64_PLTOFF64MSB 0x3e /* @pltoff(sym+add), data8 MSB */ +#define R_IA64_PLTOFF64LSB 0x3f /* @pltoff(sym+add), data8 LSB */ +#define R_IA64_FPTR64I 0x43 /* @fptr(sym+add), mov imm64 */ +#define R_IA64_FPTR32MSB 0x44 /* @fptr(sym+add), data4 MSB */ +#define R_IA64_FPTR32LSB 0x45 /* @fptr(sym+add), data4 LSB */ +#define R_IA64_FPTR64MSB 0x46 /* @fptr(sym+add), data8 MSB */ +#define R_IA64_FPTR64LSB 0x47 /* @fptr(sym+add), data8 LSB */ +#define R_IA64_PCREL60B 0x48 /* @pcrel(sym+add), brl */ +#define R_IA64_PCREL21B 0x49 /* @pcrel(sym+add), ptb, call */ +#define R_IA64_PCREL21M 0x4a /* @pcrel(sym+add), chk.s */ +#define R_IA64_PCREL21F 0x4b /* @pcrel(sym+add), fchkf */ +#define R_IA64_PCREL32MSB 0x4c /* @pcrel(sym+add), data4 MSB */ +#define R_IA64_PCREL32LSB 0x4d /* @pcrel(sym+add), data4 LSB */ +#define R_IA64_PCREL64MSB 0x4e /* @pcrel(sym+add), data8 MSB */ +#define R_IA64_PCREL64LSB 0x4f /* @pcrel(sym+add), data8 LSB */ +#define R_IA64_LTOFF_FPTR22 0x52 /* @ltoff(@fptr(s+a)), imm22 */ +#define R_IA64_LTOFF_FPTR64I 0x53 /* @ltoff(@fptr(s+a)), imm64 */ +#define R_IA64_LTOFF_FPTR32MSB 0x54 /* @ltoff(@fptr(s+a)), 4 MSB */ +#define R_IA64_LTOFF_FPTR32LSB 0x55 /* @ltoff(@fptr(s+a)), 4 LSB */ +#define R_IA64_LTOFF_FPTR64MSB 0x56 /* @ltoff(@fptr(s+a)), 8 MSB */ +#define R_IA64_LTOFF_FPTR64LSB 0x57 /* @ltoff(@fptr(s+a)), 8 LSB */ +#define R_IA64_SEGREL32MSB 0x5c /* @segrel(sym+add), data4 MSB */ +#define R_IA64_SEGREL32LSB 0x5d /* @segrel(sym+add), data4 LSB */ +#define R_IA64_SEGREL64MSB 0x5e /* @segrel(sym+add), data8 MSB */ +#define R_IA64_SEGREL64LSB 0x5f /* @segrel(sym+add), data8 LSB */ +#define R_IA64_SECREL32MSB 0x64 /* @secrel(sym+add), data4 MSB */ +#define R_IA64_SECREL32LSB 0x65 /* @secrel(sym+add), data4 LSB */ +#define R_IA64_SECREL64MSB 0x66 /* @secrel(sym+add), data8 MSB */ +#define R_IA64_SECREL64LSB 0x67 /* @secrel(sym+add), data8 LSB */ +#define R_IA64_REL32MSB 0x6c /* data 4 + REL */ +#define R_IA64_REL32LSB 0x6d /* data 4 + REL */ +#define R_IA64_REL64MSB 0x6e /* data 8 + REL */ +#define R_IA64_REL64LSB 0x6f /* data 8 + REL */ +#define R_IA64_LTV32MSB 0x74 /* symbol + addend, data4 MSB */ +#define R_IA64_LTV32LSB 0x75 /* symbol + addend, data4 LSB */ +#define R_IA64_LTV64MSB 0x76 /* symbol + addend, data8 MSB */ +#define R_IA64_LTV64LSB 0x77 /* symbol + addend, data8 LSB */ +#define R_IA64_PCREL21BI 0x79 /* @pcrel(sym+add), ptb, call */ +#define R_IA64_PCREL22 0x7a /* @pcrel(sym+add), imm22 */ +#define R_IA64_PCREL64I 0x7b /* @pcrel(sym+add), imm64 */ +#define R_IA64_IPLTMSB 0x80 /* dynamic reloc, imported PLT, MSB */ +#define R_IA64_IPLTLSB 0x81 /* dynamic reloc, imported PLT, LSB */ +#define R_IA64_COPY 0x84 /* dynamic reloc, data copy */ +#define R_IA64_SUB 0x85 /* -symbol + addend, add imm22 */ +#define R_IA64_LTOFF22X 0x86 /* LTOFF22, relaxable. */ +#define R_IA64_LDXMOV 0x87 /* Use of LTOFF22X. */ +#define R_IA64_TPREL14 0x91 /* @tprel(sym+add), add imm14 */ +#define R_IA64_TPREL22 0x92 /* @tprel(sym+add), add imm22 */ +#define R_IA64_TPREL64I 0x93 /* @tprel(sym+add), add imm64 */ +#define R_IA64_TPREL64MSB 0x96 /* @tprel(sym+add), data8 MSB */ +#define R_IA64_TPREL64LSB 0x97 /* @tprel(sym+add), data8 LSB */ +#define R_IA64_LTOFF_TPREL22 0x9a /* @ltoff(@tprel(s+a)), add imm22 */ +#define R_IA64_DTPMOD64MSB 0xa6 /* @dtpmod(sym+add), data8 MSB */ +#define R_IA64_DTPMOD64LSB 0xa7 /* @dtpmod(sym+add), data8 LSB */ +#define R_IA64_LTOFF_DTPMOD22 0xaa /* @ltoff(@dtpmod(s+a)), imm22 */ +#define R_IA64_DTPREL14 0xb1 /* @dtprel(sym+add), imm14 */ +#define R_IA64_DTPREL22 0xb2 /* @dtprel(sym+add), imm22 */ +#define R_IA64_DTPREL64I 0xb3 /* @dtprel(sym+add), imm64 */ +#define R_IA64_DTPREL32MSB 0xb4 /* @dtprel(sym+add), data4 MSB */ +#define R_IA64_DTPREL32LSB 0xb5 /* @dtprel(sym+add), data4 LSB */ +#define R_IA64_DTPREL64MSB 0xb6 /* @dtprel(sym+add), data8 MSB */ +#define R_IA64_DTPREL64LSB 0xb7 /* @dtprel(sym+add), data8 LSB */ +#define R_IA64_LTOFF_DTPREL22 0xba /* @ltoff(@dtprel(s+a)), imm22 */ + +/* IA-64 specific section flags: */ +#define SHF_IA_64_SHORT 0x10000000 /* section near gp */ + +/* + * We use (abuse?) this macro to insert the (empty) vm_area that is + * used to map the register backing store. I don't see any better + * place to do this, but we should discuss this with Linus once we can + * talk to him... + */ +extern void ia64_init_addr_space (void); +#define ELF_PLAT_INIT(_r, load_addr) ia64_init_addr_space() + +/* ELF register definitions. This is needed for core dump support. */ + +/* + * elf_gregset_t contains the application-level state in the following order: + * r0-r31 + * NaT bits (for r0-r31; bit N == 1 iff rN is a NaT) + * predicate registers (p0-p63) + * b0-b7 + * ip cfm psr + * ar.rsc ar.bsp ar.bspstore ar.rnat + * ar.ccv ar.unat ar.fpsr ar.pfs ar.lc ar.ec ar.csd ar.ssd + */ +#define ELF_NGREG 128 /* we really need just 72 but let's leave some headroom... */ +#define ELF_NFPREG 128 /* f0 and f1 could be omitted, but so what... */ + +/* elf_gregset_t register offsets */ +#define ELF_GR_0_OFFSET 0 +#define ELF_NAT_OFFSET (32 * sizeof(elf_greg_t)) +#define ELF_PR_OFFSET (33 * sizeof(elf_greg_t)) +#define ELF_BR_0_OFFSET (34 * sizeof(elf_greg_t)) +#define ELF_CR_IIP_OFFSET (42 * sizeof(elf_greg_t)) +#define ELF_CFM_OFFSET (43 * sizeof(elf_greg_t)) +#define ELF_CR_IPSR_OFFSET (44 * sizeof(elf_greg_t)) +#define ELF_GR_OFFSET(i) (ELF_GR_0_OFFSET + i * sizeof(elf_greg_t)) +#define ELF_BR_OFFSET(i) (ELF_BR_0_OFFSET + i * sizeof(elf_greg_t)) +#define ELF_AR_RSC_OFFSET (45 * sizeof(elf_greg_t)) +#define ELF_AR_BSP_OFFSET (46 * sizeof(elf_greg_t)) +#define ELF_AR_BSPSTORE_OFFSET (47 * sizeof(elf_greg_t)) +#define ELF_AR_RNAT_OFFSET (48 * sizeof(elf_greg_t)) +#define ELF_AR_CCV_OFFSET (49 * sizeof(elf_greg_t)) +#define ELF_AR_UNAT_OFFSET (50 * sizeof(elf_greg_t)) +#define ELF_AR_FPSR_OFFSET (51 * sizeof(elf_greg_t)) +#define ELF_AR_PFS_OFFSET (52 * sizeof(elf_greg_t)) +#define ELF_AR_LC_OFFSET (53 * sizeof(elf_greg_t)) +#define ELF_AR_EC_OFFSET (54 * sizeof(elf_greg_t)) +#define ELF_AR_CSD_OFFSET (55 * sizeof(elf_greg_t)) +#define ELF_AR_SSD_OFFSET (56 * sizeof(elf_greg_t)) +#define ELF_AR_END_OFFSET (57 * sizeof(elf_greg_t)) + +typedef unsigned long elf_fpxregset_t; + +typedef unsigned long elf_greg_t; +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct ia64_fpreg elf_fpreg_t; +typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; + + + +struct pt_regs; /* forward declaration... */ +extern void ia64_elf_core_copy_regs (struct pt_regs *src, elf_gregset_t dst); +#define ELF_CORE_COPY_REGS(_dest,_regs) ia64_elf_core_copy_regs(_regs, _dest); + +/* This macro yields a bitmask that programs can use to figure out + what instruction set this CPU supports. */ +#define ELF_HWCAP 0 + +/* This macro yields a string that ld.so will use to load + implementation specific libraries for optimization. Not terribly + relevant until we have real hardware to play with... */ +#define ELF_PLATFORM NULL + +#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX) +#define elf_read_implies_exec(ex, executable_stack) \ + ((executable_stack!=EXSTACK_DISABLE_X) && ((ex).e_flags & EF_IA_64_LINUX_EXECUTABLE_STACK) != 0) + +struct task_struct; + +#define GATE_EHDR ((const struct elfhdr *) GATE_ADDR) + +/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */ +#define ARCH_DLINFO \ +do { \ + extern char __kernel_syscall_via_epc[]; \ + NEW_AUX_ENT(AT_SYSINFO, (unsigned long) __kernel_syscall_via_epc); \ + NEW_AUX_ENT(AT_SYSINFO_EHDR, (unsigned long) GATE_EHDR); \ +} while (0) + + +/* + * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out + * extra segments containing the gate DSO contents. Dumping its + * contents makes post-mortem fully interpretable later without matching up + * the same kernel and hardware config to see what PC values meant. + * Dumping its extra ELF program headers includes all the other information + * a debugger needs to easily find how the gate DSO was being used. + */ +#define ELF_CORE_EXTRA_PHDRS (GATE_EHDR->e_phnum) +#define ELF_CORE_WRITE_EXTRA_PHDRS \ +do { \ + const struct elf_phdr *const gate_phdrs = \ + (const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff); \ + int i; \ + Elf64_Off ofs = 0; \ + for (i = 0; i < GATE_EHDR->e_phnum; ++i) { \ + struct elf_phdr phdr = gate_phdrs[i]; \ + if (phdr.p_type == PT_LOAD) { \ + phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz); \ + phdr.p_filesz = phdr.p_memsz; \ + if (ofs == 0) { \ + ofs = phdr.p_offset = offset; \ + offset += phdr.p_filesz; \ + } \ + else \ + phdr.p_offset = ofs; \ + } \ + else \ + phdr.p_offset += ofs; \ + phdr.p_paddr = 0; /* match other core phdrs */ \ + DUMP_WRITE(&phdr, sizeof(phdr)); \ + } \ +} while (0) +#define ELF_CORE_WRITE_EXTRA_DATA \ +do { \ + const struct elf_phdr *const gate_phdrs = \ + (const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff); \ + int i; \ + for (i = 0; i < GATE_EHDR->e_phnum; ++i) { \ + if (gate_phdrs[i].p_type == PT_LOAD) { \ + DUMP_WRITE((void *) gate_phdrs[i].p_vaddr, \ + PAGE_ALIGN(gate_phdrs[i].p_memsz)); \ + break; \ + } \ + } \ +} while (0) + +#endif /* _ASM_IA64_ELF_H */ diff --git a/arch/ia64/include/asm/emergency-restart.h b/arch/ia64/include/asm/emergency-restart.h new file mode 100644 index 000000000000..108d8c48e42e --- /dev/null +++ b/arch/ia64/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/ia64/include/asm/errno.h b/arch/ia64/include/asm/errno.h new file mode 100644 index 000000000000..4c82b503d92f --- /dev/null +++ b/arch/ia64/include/asm/errno.h @@ -0,0 +1 @@ +#include diff --git a/arch/ia64/include/asm/esi.h b/arch/ia64/include/asm/esi.h new file mode 100644 index 000000000000..40991c6ba647 --- /dev/null +++ b/arch/ia64/include/asm/esi.h @@ -0,0 +1,29 @@ +/* + * ESI service calls. + * + * Copyright (c) Copyright 2005-2006 Hewlett-Packard Development Company, L.P. + * Alex Williamson + */ +#ifndef esi_h +#define esi_h + +#include + +#define ESI_QUERY 0x00000001 +#define ESI_OPEN_HANDLE 0x02000000 +#define ESI_CLOSE_HANDLE 0x02000001 + +enum esi_proc_type { + ESI_PROC_SERIALIZED, /* calls need to be serialized */ + ESI_PROC_MP_SAFE, /* MP-safe, but not reentrant */ + ESI_PROC_REENTRANT /* MP-safe and reentrant */ +}; + +extern struct ia64_sal_retval esi_call_phys (void *, u64 *); +extern int ia64_esi_call(efi_guid_t, struct ia64_sal_retval *, + enum esi_proc_type, + u64, u64, u64, u64, u64, u64, u64, u64); +extern int ia64_esi_call_phys(efi_guid_t, struct ia64_sal_retval *, u64, u64, + u64, u64, u64, u64, u64, u64); + +#endif /* esi_h */ diff --git a/arch/ia64/include/asm/fb.h b/arch/ia64/include/asm/fb.h new file mode 100644 index 000000000000..89a397cee90a --- /dev/null +++ b/arch/ia64/include/asm/fb.h @@ -0,0 +1,23 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include +#include +#include +#include + +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + if (efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start)) + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); + else + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); +} + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/ia64/include/asm/fcntl.h b/arch/ia64/include/asm/fcntl.h new file mode 100644 index 000000000000..1dd275dc8f65 --- /dev/null +++ b/arch/ia64/include/asm/fcntl.h @@ -0,0 +1,13 @@ +#ifndef _ASM_IA64_FCNTL_H +#define _ASM_IA64_FCNTL_H +/* + * Modified 1998-2000 + * David Mosberger-Tang , Hewlett-Packard Co. + */ + +#define force_o_largefile() \ + (personality(current->personality) != PER_LINUX32) + +#include + +#endif /* _ASM_IA64_FCNTL_H */ diff --git a/arch/ia64/include/asm/fpswa.h b/arch/ia64/include/asm/fpswa.h new file mode 100644 index 000000000000..62edfceadaa6 --- /dev/null +++ b/arch/ia64/include/asm/fpswa.h @@ -0,0 +1,73 @@ +#ifndef _ASM_IA64_FPSWA_H +#define _ASM_IA64_FPSWA_H + +/* + * Floating-point Software Assist + * + * Copyright (C) 1999 Intel Corporation. + * Copyright (C) 1999 Asit Mallick + * Copyright (C) 1999 Goutham Rao + */ + +typedef struct { + /* 4 * 128 bits */ + unsigned long fp_lp[4*2]; +} fp_state_low_preserved_t; + +typedef struct { + /* 10 * 128 bits */ + unsigned long fp_lv[10 * 2]; +} fp_state_low_volatile_t; + +typedef struct { + /* 16 * 128 bits */ + unsigned long fp_hp[16 * 2]; +} fp_state_high_preserved_t; + +typedef struct { + /* 96 * 128 bits */ + unsigned long fp_hv[96 * 2]; +} fp_state_high_volatile_t; + +/** + * floating point state to be passed to the FP emulation library by + * the trap/fault handler + */ +typedef struct { + unsigned long bitmask_low64; + unsigned long bitmask_high64; + fp_state_low_preserved_t *fp_state_low_preserved; + fp_state_low_volatile_t *fp_state_low_volatile; + fp_state_high_preserved_t *fp_state_high_preserved; + fp_state_high_volatile_t *fp_state_high_volatile; +} fp_state_t; + +typedef struct { + unsigned long status; + unsigned long err0; + unsigned long err1; + unsigned long err2; +} fpswa_ret_t; + +/** + * function header for the Floating Point software assist + * library. This function is invoked by the Floating point software + * assist trap/fault handler. + */ +typedef fpswa_ret_t (*efi_fpswa_t) (unsigned long trap_type, void *bundle, unsigned long *ipsr, + unsigned long *fsr, unsigned long *isr, unsigned long *preds, + unsigned long *ifs, fp_state_t *fp_state); + +/** + * This is the FPSWA library interface as defined by EFI. We need to pass a + * pointer to the interface itself on a call to the assist library + */ +typedef struct { + unsigned int revision; + unsigned int reserved; + efi_fpswa_t fpswa; +} fpswa_interface_t; + +extern fpswa_interface_t *fpswa_interface; + +#endif /* _ASM_IA64_FPSWA_H */ diff --git a/arch/ia64/include/asm/fpu.h b/arch/ia64/include/asm/fpu.h new file mode 100644 index 000000000000..3859558ff0a4 --- /dev/null +++ b/arch/ia64/include/asm/fpu.h @@ -0,0 +1,66 @@ +#ifndef _ASM_IA64_FPU_H +#define _ASM_IA64_FPU_H + +/* + * Copyright (C) 1998, 1999, 2002, 2003 Hewlett-Packard Co + * David Mosberger-Tang + */ + +#include + +/* floating point status register: */ +#define FPSR_TRAP_VD (1 << 0) /* invalid op trap disabled */ +#define FPSR_TRAP_DD (1 << 1) /* denormal trap disabled */ +#define FPSR_TRAP_ZD (1 << 2) /* zero-divide trap disabled */ +#define FPSR_TRAP_OD (1 << 3) /* overflow trap disabled */ +#define FPSR_TRAP_UD (1 << 4) /* underflow trap disabled */ +#define FPSR_TRAP_ID (1 << 5) /* inexact trap disabled */ +#define FPSR_S0(x) ((x) << 6) +#define FPSR_S1(x) ((x) << 19) +#define FPSR_S2(x) (__IA64_UL(x) << 32) +#define FPSR_S3(x) (__IA64_UL(x) << 45) + +/* floating-point status field controls: */ +#define FPSF_FTZ (1 << 0) /* flush-to-zero */ +#define FPSF_WRE (1 << 1) /* widest-range exponent */ +#define FPSF_PC(x) (((x) & 0x3) << 2) /* precision control */ +#define FPSF_RC(x) (((x) & 0x3) << 4) /* rounding control */ +#define FPSF_TD (1 << 6) /* trap disabled */ + +/* floating-point status field flags: */ +#define FPSF_V (1 << 7) /* invalid operation flag */ +#define FPSF_D (1 << 8) /* denormal/unnormal operand flag */ +#define FPSF_Z (1 << 9) /* zero divide (IEEE) flag */ +#define FPSF_O (1 << 10) /* overflow (IEEE) flag */ +#define FPSF_U (1 << 11) /* underflow (IEEE) flag */ +#define FPSF_I (1 << 12) /* inexact (IEEE) flag) */ + +/* floating-point rounding control: */ +#define FPRC_NEAREST 0x0 +#define FPRC_NEGINF 0x1 +#define FPRC_POSINF 0x2 +#define FPRC_TRUNC 0x3 + +#define FPSF_DEFAULT (FPSF_PC (0x3) | FPSF_RC (FPRC_NEAREST)) + +/* This default value is the same as HP-UX uses. Don't change it + without a very good reason. */ +#define FPSR_DEFAULT (FPSR_TRAP_VD | FPSR_TRAP_DD | FPSR_TRAP_ZD \ + | FPSR_TRAP_OD | FPSR_TRAP_UD | FPSR_TRAP_ID \ + | FPSR_S0 (FPSF_DEFAULT) \ + | FPSR_S1 (FPSF_DEFAULT | FPSF_TD | FPSF_WRE) \ + | FPSR_S2 (FPSF_DEFAULT | FPSF_TD) \ + | FPSR_S3 (FPSF_DEFAULT | FPSF_TD)) + +# ifndef __ASSEMBLY__ + +struct ia64_fpreg { + union { + unsigned long bits[2]; + long double __dummy; /* force 16-byte alignment */ + } u; +}; + +# endif /* __ASSEMBLY__ */ + +#endif /* _ASM_IA64_FPU_H */ diff --git a/arch/ia64/include/asm/futex.h b/arch/ia64/include/asm/futex.h new file mode 100644 index 000000000000..c7f0f062239c --- /dev/null +++ b/arch/ia64/include/asm/futex.h @@ -0,0 +1,124 @@ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#include +#include +#include +#include + +#define __futex_atomic_op1(insn, ret, oldval, uaddr, oparg) \ +do { \ + register unsigned long r8 __asm ("r8") = 0; \ + __asm__ __volatile__( \ + " mf;; \n" \ + "[1:] " insn ";; \n" \ + " .xdata4 \"__ex_table\", 1b-., 2f-. \n" \ + "[2:]" \ + : "+r" (r8), "=r" (oldval) \ + : "r" (uaddr), "r" (oparg) \ + : "memory"); \ + ret = r8; \ +} while (0) + +#define __futex_atomic_op2(insn, ret, oldval, uaddr, oparg) \ +do { \ + register unsigned long r8 __asm ("r8") = 0; \ + int val, newval; \ + do { \ + __asm__ __volatile__( \ + " mf;; \n" \ + "[1:] ld4 %3=[%4];; \n" \ + " mov %2=%3 \n" \ + insn ";; \n" \ + " mov ar.ccv=%2;; \n" \ + "[2:] cmpxchg4.acq %1=[%4],%3,ar.ccv;; \n" \ + " .xdata4 \"__ex_table\", 1b-., 3f-.\n" \ + " .xdata4 \"__ex_table\", 2b-., 3f-.\n" \ + "[3:]" \ + : "+r" (r8), "=r" (val), "=&r" (oldval), \ + "=&r" (newval) \ + : "r" (uaddr), "r" (oparg) \ + : "memory"); \ + if (unlikely (r8)) \ + break; \ + } while (unlikely (val != oldval)); \ + ret = r8; \ +} while (0) + +static inline int +futex_atomic_op_inuser (int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + __futex_atomic_op1("xchg4 %1=[%2],%3", ret, oldval, uaddr, + oparg); + break; + case FUTEX_OP_ADD: + __futex_atomic_op2("add %3=%3,%5", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_atomic_op2("or %3=%3,%5", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_atomic_op2("and %3=%3,%5", ret, oldval, uaddr, + ~oparg); + break; + case FUTEX_OP_XOR: + __futex_atomic_op2("xor %3=%3,%5", ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + { + register unsigned long r8 __asm ("r8"); + __asm__ __volatile__( + " mf;; \n" + " mov ar.ccv=%3;; \n" + "[1:] cmpxchg4.acq %0=[%1],%2,ar.ccv \n" + " .xdata4 \"__ex_table\", 1b-., 2f-. \n" + "[2:]" + : "=r" (r8) + : "r" (uaddr), "r" (newval), + "rO" ((long) (unsigned) oldval) + : "memory"); + return r8; + } +} + +#endif /* _ASM_FUTEX_H */ diff --git a/arch/ia64/include/asm/gcc_intrin.h b/arch/ia64/include/asm/gcc_intrin.h new file mode 100644 index 000000000000..0f5b55921758 --- /dev/null +++ b/arch/ia64/include/asm/gcc_intrin.h @@ -0,0 +1,620 @@ +#ifndef _ASM_IA64_GCC_INTRIN_H +#define _ASM_IA64_GCC_INTRIN_H +/* + * + * Copyright (C) 2002,2003 Jun Nakajima + * Copyright (C) 2002,2003 Suresh Siddha + */ + +#include + +/* define this macro to get some asm stmts included in 'c' files */ +#define ASM_SUPPORTED + +/* Optimization barrier */ +/* The "volatile" is due to gcc bugs */ +#define ia64_barrier() asm volatile ("":::"memory") + +#define ia64_stop() asm volatile (";;"::) + +#define ia64_invala_gr(regnum) asm volatile ("invala.e r%0" :: "i"(regnum)) + +#define ia64_invala_fr(regnum) asm volatile ("invala.e f%0" :: "i"(regnum)) + +#define ia64_flushrs() asm volatile ("flushrs;;":::"memory") + +#define ia64_loadrs() asm volatile ("loadrs;;":::"memory") + +extern void ia64_bad_param_for_setreg (void); +extern void ia64_bad_param_for_getreg (void); + +#ifdef __KERNEL__ +register unsigned long ia64_r13 asm ("r13") __used; +#endif + +#define ia64_native_setreg(regnum, val) \ +({ \ + switch (regnum) { \ + case _IA64_REG_PSR_L: \ + asm volatile ("mov psr.l=%0" :: "r"(val) : "memory"); \ + break; \ + case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC: \ + asm volatile ("mov ar%0=%1" :: \ + "i" (regnum - _IA64_REG_AR_KR0), \ + "r"(val): "memory"); \ + break; \ + case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1: \ + asm volatile ("mov cr%0=%1" :: \ + "i" (regnum - _IA64_REG_CR_DCR), \ + "r"(val): "memory" ); \ + break; \ + case _IA64_REG_SP: \ + asm volatile ("mov r12=%0" :: \ + "r"(val): "memory"); \ + break; \ + case _IA64_REG_GP: \ + asm volatile ("mov gp=%0" :: "r"(val) : "memory"); \ + break; \ + default: \ + ia64_bad_param_for_setreg(); \ + break; \ + } \ +}) + +#define ia64_native_getreg(regnum) \ +({ \ + __u64 ia64_intri_res; \ + \ + switch (regnum) { \ + case _IA64_REG_GP: \ + asm volatile ("mov %0=gp" : "=r"(ia64_intri_res)); \ + break; \ + case _IA64_REG_IP: \ + asm volatile ("mov %0=ip" : "=r"(ia64_intri_res)); \ + break; \ + case _IA64_REG_PSR: \ + asm volatile ("mov %0=psr" : "=r"(ia64_intri_res)); \ + break; \ + case _IA64_REG_TP: /* for current() */ \ + ia64_intri_res = ia64_r13; \ + break; \ + case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC: \ + asm volatile ("mov %0=ar%1" : "=r" (ia64_intri_res) \ + : "i"(regnum - _IA64_REG_AR_KR0)); \ + break; \ + case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1: \ + asm volatile ("mov %0=cr%1" : "=r" (ia64_intri_res) \ + : "i" (regnum - _IA64_REG_CR_DCR)); \ + break; \ + case _IA64_REG_SP: \ + asm volatile ("mov %0=sp" : "=r" (ia64_intri_res)); \ + break; \ + default: \ + ia64_bad_param_for_getreg(); \ + break; \ + } \ + ia64_intri_res; \ +}) + +#define ia64_hint_pause 0 + +#define ia64_hint(mode) \ +({ \ + switch (mode) { \ + case ia64_hint_pause: \ + asm volatile ("hint @pause" ::: "memory"); \ + break; \ + } \ +}) + + +/* Integer values for mux1 instruction */ +#define ia64_mux1_brcst 0 +#define ia64_mux1_mix 8 +#define ia64_mux1_shuf 9 +#define ia64_mux1_alt 10 +#define ia64_mux1_rev 11 + +#define ia64_mux1(x, mode) \ +({ \ + __u64 ia64_intri_res; \ + \ + switch (mode) { \ + case ia64_mux1_brcst: \ + asm ("mux1 %0=%1,@brcst" : "=r" (ia64_intri_res) : "r" (x)); \ + break; \ + case ia64_mux1_mix: \ + asm ("mux1 %0=%1,@mix" : "=r" (ia64_intri_res) : "r" (x)); \ + break; \ + case ia64_mux1_shuf: \ + asm ("mux1 %0=%1,@shuf" : "=r" (ia64_intri_res) : "r" (x)); \ + break; \ + case ia64_mux1_alt: \ + asm ("mux1 %0=%1,@alt" : "=r" (ia64_intri_res) : "r" (x)); \ + break; \ + case ia64_mux1_rev: \ + asm ("mux1 %0=%1,@rev" : "=r" (ia64_intri_res) : "r" (x)); \ + break; \ + } \ + ia64_intri_res; \ +}) + +#if __GNUC__ >= 4 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) +# define ia64_popcnt(x) __builtin_popcountl(x) +#else +# define ia64_popcnt(x) \ + ({ \ + __u64 ia64_intri_res; \ + asm ("popcnt %0=%1" : "=r" (ia64_intri_res) : "r" (x)); \ + \ + ia64_intri_res; \ + }) +#endif + +#define ia64_getf_exp(x) \ +({ \ + long ia64_intri_res; \ + \ + asm ("getf.exp %0=%1" : "=r"(ia64_intri_res) : "f"(x)); \ + \ + ia64_intri_res; \ +}) + +#define ia64_shrp(a, b, count) \ +({ \ + __u64 ia64_intri_res; \ + asm ("shrp %0=%1,%2,%3" : "=r"(ia64_intri_res) : "r"(a), "r"(b), "i"(count)); \ + ia64_intri_res; \ +}) + +#define ia64_ldfs(regnum, x) \ +({ \ + register double __f__ asm ("f"#regnum); \ + asm volatile ("ldfs %0=[%1]" :"=f"(__f__): "r"(x)); \ +}) + +#define ia64_ldfd(regnum, x) \ +({ \ + register double __f__ asm ("f"#regnum); \ + asm volatile ("ldfd %0=[%1]" :"=f"(__f__): "r"(x)); \ +}) + +#define ia64_ldfe(regnum, x) \ +({ \ + register double __f__ asm ("f"#regnum); \ + asm volatile ("ldfe %0=[%1]" :"=f"(__f__): "r"(x)); \ +}) + +#define ia64_ldf8(regnum, x) \ +({ \ + register double __f__ asm ("f"#regnum); \ + asm volatile ("ldf8 %0=[%1]" :"=f"(__f__): "r"(x)); \ +}) + +#define ia64_ldf_fill(regnum, x) \ +({ \ + register double __f__ asm ("f"#regnum); \ + asm volatile ("ldf.fill %0=[%1]" :"=f"(__f__): "r"(x)); \ +}) + +#define ia64_st4_rel_nta(m, val) \ +({ \ + asm volatile ("st4.rel.nta [%0] = %1\n\t" :: "r"(m), "r"(val)); \ +}) + +#define ia64_stfs(x, regnum) \ +({ \ + register double __f__ asm ("f"#regnum); \ + asm volatile ("stfs [%0]=%1" :: "r"(x), "f"(__f__) : "memory"); \ +}) + +#define ia64_stfd(x, regnum) \ +({ \ + register double __f__ asm ("f"#regnum); \ + asm volatile ("stfd [%0]=%1" :: "r"(x), "f"(__f__) : "memory"); \ +}) + +#define ia64_stfe(x, regnum) \ +({ \ + register double __f__ asm ("f"#regnum); \ + asm volatile ("stfe [%0]=%1" :: "r"(x), "f"(__f__) : "memory"); \ +}) + +#define ia64_stf8(x, regnum) \ +({ \ + register double __f__ asm ("f"#regnum); \ + asm volatile ("stf8 [%0]=%1" :: "r"(x), "f"(__f__) : "memory"); \ +}) + +#define ia64_stf_spill(x, regnum) \ +({ \ + register double __f__ asm ("f"#regnum); \ + asm volatile ("stf.spill [%0]=%1" :: "r"(x), "f"(__f__) : "memory"); \ +}) + +#define ia64_fetchadd4_acq(p, inc) \ +({ \ + \ + __u64 ia64_intri_res; \ + asm volatile ("fetchadd4.acq %0=[%1],%2" \ + : "=r"(ia64_intri_res) : "r"(p), "i" (inc) \ + : "memory"); \ + \ + ia64_intri_res; \ +}) + +#define ia64_fetchadd4_rel(p, inc) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("fetchadd4.rel %0=[%1],%2" \ + : "=r"(ia64_intri_res) : "r"(p), "i" (inc) \ + : "memory"); \ + \ + ia64_intri_res; \ +}) + +#define ia64_fetchadd8_acq(p, inc) \ +({ \ + \ + __u64 ia64_intri_res; \ + asm volatile ("fetchadd8.acq %0=[%1],%2" \ + : "=r"(ia64_intri_res) : "r"(p), "i" (inc) \ + : "memory"); \ + \ + ia64_intri_res; \ +}) + +#define ia64_fetchadd8_rel(p, inc) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("fetchadd8.rel %0=[%1],%2" \ + : "=r"(ia64_intri_res) : "r"(p), "i" (inc) \ + : "memory"); \ + \ + ia64_intri_res; \ +}) + +#define ia64_xchg1(ptr,x) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("xchg1 %0=[%1],%2" \ + : "=r" (ia64_intri_res) : "r" (ptr), "r" (x) : "memory"); \ + ia64_intri_res; \ +}) + +#define ia64_xchg2(ptr,x) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("xchg2 %0=[%1],%2" : "=r" (ia64_intri_res) \ + : "r" (ptr), "r" (x) : "memory"); \ + ia64_intri_res; \ +}) + +#define ia64_xchg4(ptr,x) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("xchg4 %0=[%1],%2" : "=r" (ia64_intri_res) \ + : "r" (ptr), "r" (x) : "memory"); \ + ia64_intri_res; \ +}) + +#define ia64_xchg8(ptr,x) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("xchg8 %0=[%1],%2" : "=r" (ia64_intri_res) \ + : "r" (ptr), "r" (x) : "memory"); \ + ia64_intri_res; \ +}) + +#define ia64_cmpxchg1_acq(ptr, new, old) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ + asm volatile ("cmpxchg1.acq %0=[%1],%2,ar.ccv": \ + "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ + ia64_intri_res; \ +}) + +#define ia64_cmpxchg1_rel(ptr, new, old) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ + asm volatile ("cmpxchg1.rel %0=[%1],%2,ar.ccv": \ + "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ + ia64_intri_res; \ +}) + +#define ia64_cmpxchg2_acq(ptr, new, old) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ + asm volatile ("cmpxchg2.acq %0=[%1],%2,ar.ccv": \ + "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ + ia64_intri_res; \ +}) + +#define ia64_cmpxchg2_rel(ptr, new, old) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ + \ + asm volatile ("cmpxchg2.rel %0=[%1],%2,ar.ccv": \ + "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ + ia64_intri_res; \ +}) + +#define ia64_cmpxchg4_acq(ptr, new, old) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ + asm volatile ("cmpxchg4.acq %0=[%1],%2,ar.ccv": \ + "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ + ia64_intri_res; \ +}) + +#define ia64_cmpxchg4_rel(ptr, new, old) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ + asm volatile ("cmpxchg4.rel %0=[%1],%2,ar.ccv": \ + "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ + ia64_intri_res; \ +}) + +#define ia64_cmpxchg8_acq(ptr, new, old) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ + asm volatile ("cmpxchg8.acq %0=[%1],%2,ar.ccv": \ + "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ + ia64_intri_res; \ +}) + +#define ia64_cmpxchg8_rel(ptr, new, old) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ + \ + asm volatile ("cmpxchg8.rel %0=[%1],%2,ar.ccv": \ + "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ + ia64_intri_res; \ +}) + +#define ia64_mf() asm volatile ("mf" ::: "memory") +#define ia64_mfa() asm volatile ("mf.a" ::: "memory") + +#define ia64_invala() asm volatile ("invala" ::: "memory") + +#define ia64_native_thash(addr) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("thash %0=%1" : "=r"(ia64_intri_res) : "r" (addr)); \ + ia64_intri_res; \ +}) + +#define ia64_srlz_i() asm volatile (";; srlz.i ;;" ::: "memory") +#define ia64_srlz_d() asm volatile (";; srlz.d" ::: "memory"); + +#ifdef HAVE_SERIALIZE_DIRECTIVE +# define ia64_dv_serialize_data() asm volatile (".serialize.data"); +# define ia64_dv_serialize_instruction() asm volatile (".serialize.instruction"); +#else +# define ia64_dv_serialize_data() +# define ia64_dv_serialize_instruction() +#endif + +#define ia64_nop(x) asm volatile ("nop %0"::"i"(x)); + +#define ia64_itci(addr) asm volatile ("itc.i %0;;" :: "r"(addr) : "memory") + +#define ia64_itcd(addr) asm volatile ("itc.d %0;;" :: "r"(addr) : "memory") + + +#define ia64_itri(trnum, addr) asm volatile ("itr.i itr[%0]=%1" \ + :: "r"(trnum), "r"(addr) : "memory") + +#define ia64_itrd(trnum, addr) asm volatile ("itr.d dtr[%0]=%1" \ + :: "r"(trnum), "r"(addr) : "memory") + +#define ia64_tpa(addr) \ +({ \ + __u64 ia64_pa; \ + asm volatile ("tpa %0 = %1" : "=r"(ia64_pa) : "r"(addr) : "memory"); \ + ia64_pa; \ +}) + +#define __ia64_set_dbr(index, val) \ + asm volatile ("mov dbr[%0]=%1" :: "r"(index), "r"(val) : "memory") + +#define ia64_set_ibr(index, val) \ + asm volatile ("mov ibr[%0]=%1" :: "r"(index), "r"(val) : "memory") + +#define ia64_set_pkr(index, val) \ + asm volatile ("mov pkr[%0]=%1" :: "r"(index), "r"(val) : "memory") + +#define ia64_set_pmc(index, val) \ + asm volatile ("mov pmc[%0]=%1" :: "r"(index), "r"(val) : "memory") + +#define ia64_set_pmd(index, val) \ + asm volatile ("mov pmd[%0]=%1" :: "r"(index), "r"(val) : "memory") + +#define ia64_native_set_rr(index, val) \ + asm volatile ("mov rr[%0]=%1" :: "r"(index), "r"(val) : "memory"); + +#define ia64_native_get_cpuid(index) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("mov %0=cpuid[%r1]" : "=r"(ia64_intri_res) : "rO"(index)); \ + ia64_intri_res; \ +}) + +#define __ia64_get_dbr(index) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("mov %0=dbr[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ + ia64_intri_res; \ +}) + +#define ia64_get_ibr(index) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("mov %0=ibr[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ + ia64_intri_res; \ +}) + +#define ia64_get_pkr(index) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("mov %0=pkr[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ + ia64_intri_res; \ +}) + +#define ia64_get_pmc(index) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("mov %0=pmc[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ + ia64_intri_res; \ +}) + + +#define ia64_native_get_pmd(index) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("mov %0=pmd[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ + ia64_intri_res; \ +}) + +#define ia64_native_get_rr(index) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("mov %0=rr[%1]" : "=r"(ia64_intri_res) : "r" (index)); \ + ia64_intri_res; \ +}) + +#define ia64_native_fc(addr) asm volatile ("fc %0" :: "r"(addr) : "memory") + + +#define ia64_sync_i() asm volatile (";; sync.i" ::: "memory") + +#define ia64_native_ssm(mask) asm volatile ("ssm %0":: "i"((mask)) : "memory") +#define ia64_native_rsm(mask) asm volatile ("rsm %0":: "i"((mask)) : "memory") +#define ia64_sum(mask) asm volatile ("sum %0":: "i"((mask)) : "memory") +#define ia64_rum(mask) asm volatile ("rum %0":: "i"((mask)) : "memory") + +#define ia64_ptce(addr) asm volatile ("ptc.e %0" :: "r"(addr)) + +#define ia64_native_ptcga(addr, size) \ +do { \ + asm volatile ("ptc.ga %0,%1" :: "r"(addr), "r"(size) : "memory"); \ + ia64_dv_serialize_data(); \ +} while (0) + +#define ia64_ptcl(addr, size) \ +do { \ + asm volatile ("ptc.l %0,%1" :: "r"(addr), "r"(size) : "memory"); \ + ia64_dv_serialize_data(); \ +} while (0) + +#define ia64_ptri(addr, size) \ + asm volatile ("ptr.i %0,%1" :: "r"(addr), "r"(size) : "memory") + +#define ia64_ptrd(addr, size) \ + asm volatile ("ptr.d %0,%1" :: "r"(addr), "r"(size) : "memory") + +#define ia64_ttag(addr) \ +({ \ + __u64 ia64_intri_res; \ + asm volatile ("ttag %0=%1" : "=r"(ia64_intri_res) : "r" (addr)); \ + ia64_intri_res; \ +}) + + +/* Values for lfhint in ia64_lfetch and ia64_lfetch_fault */ + +#define ia64_lfhint_none 0 +#define ia64_lfhint_nt1 1 +#define ia64_lfhint_nt2 2 +#define ia64_lfhint_nta 3 + +#define ia64_lfetch(lfhint, y) \ +({ \ + switch (lfhint) { \ + case ia64_lfhint_none: \ + asm volatile ("lfetch [%0]" : : "r"(y)); \ + break; \ + case ia64_lfhint_nt1: \ + asm volatile ("lfetch.nt1 [%0]" : : "r"(y)); \ + break; \ + case ia64_lfhint_nt2: \ + asm volatile ("lfetch.nt2 [%0]" : : "r"(y)); \ + break; \ + case ia64_lfhint_nta: \ + asm volatile ("lfetch.nta [%0]" : : "r"(y)); \ + break; \ + } \ +}) + +#define ia64_lfetch_excl(lfhint, y) \ +({ \ + switch (lfhint) { \ + case ia64_lfhint_none: \ + asm volatile ("lfetch.excl [%0]" :: "r"(y)); \ + break; \ + case ia64_lfhint_nt1: \ + asm volatile ("lfetch.excl.nt1 [%0]" :: "r"(y)); \ + break; \ + case ia64_lfhint_nt2: \ + asm volatile ("lfetch.excl.nt2 [%0]" :: "r"(y)); \ + break; \ + case ia64_lfhint_nta: \ + asm volatile ("lfetch.excl.nta [%0]" :: "r"(y)); \ + break; \ + } \ +}) + +#define ia64_lfetch_fault(lfhint, y) \ +({ \ + switch (lfhint) { \ + case ia64_lfhint_none: \ + asm volatile ("lfetch.fault [%0]" : : "r"(y)); \ + break; \ + case ia64_lfhint_nt1: \ + asm volatile ("lfetch.fault.nt1 [%0]" : : "r"(y)); \ + break; \ + case ia64_lfhint_nt2: \ + asm volatile ("lfetch.fault.nt2 [%0]" : : "r"(y)); \ + break; \ + case ia64_lfhint_nta: \ + asm volatile ("lfetch.fault.nta [%0]" : : "r"(y)); \ + break; \ + } \ +}) + +#define ia64_lfetch_fault_excl(lfhint, y) \ +({ \ + switch (lfhint) { \ + case ia64_lfhint_none: \ + asm volatile ("lfetch.fault.excl [%0]" :: "r"(y)); \ + break; \ + case ia64_lfhint_nt1: \ + asm volatile ("lfetch.fault.excl.nt1 [%0]" :: "r"(y)); \ + break; \ + case ia64_lfhint_nt2: \ + asm volatile ("lfetch.fault.excl.nt2 [%0]" :: "r"(y)); \ + break; \ + case ia64_lfhint_nta: \ + asm volatile ("lfetch.fault.excl.nta [%0]" :: "r"(y)); \ + break; \ + } \ +}) + +#define ia64_native_intrin_local_irq_restore(x) \ +do { \ + asm volatile (";; cmp.ne p6,p7=%0,r0;;" \ + "(p6) ssm psr.i;" \ + "(p7) rsm psr.i;;" \ + "(p6) srlz.d" \ + :: "r"((x)) : "p6", "p7", "memory"); \ +} while (0) + +#endif /* _ASM_IA64_GCC_INTRIN_H */ diff --git a/arch/ia64/include/asm/hardirq.h b/arch/ia64/include/asm/hardirq.h new file mode 100644 index 000000000000..140e495b8e0e --- /dev/null +++ b/arch/ia64/include/asm/hardirq.h @@ -0,0 +1,37 @@ +#ifndef _ASM_IA64_HARDIRQ_H +#define _ASM_IA64_HARDIRQ_H + +/* + * Modified 1998-2002, 2004 Hewlett-Packard Co + * David Mosberger-Tang + */ + + +#include +#include + +#include + +/* + * No irq_cpustat_t for IA-64. The data is held in the per-CPU data structure. + */ + +#define __ARCH_IRQ_STAT 1 + +#define local_softirq_pending() (local_cpu_data->softirq_pending) + +#define HARDIRQ_BITS 14 + +/* + * The hardirq mask has to be large enough to have space for potentially all IRQ sources + * in the system nesting on a single CPU: + */ +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +extern void __iomem *ipi_base_addr; + +void ack_bad_irq(unsigned int irq); + +#endif /* _ASM_IA64_HARDIRQ_H */ diff --git a/arch/ia64/include/asm/hpsim.h b/arch/ia64/include/asm/hpsim.h new file mode 100644 index 000000000000..892ab198a9da --- /dev/null +++ b/arch/ia64/include/asm/hpsim.h @@ -0,0 +1,16 @@ +#ifndef _ASMIA64_HPSIM_H +#define _ASMIA64_HPSIM_H + +#ifndef CONFIG_HP_SIMSERIAL_CONSOLE +static inline int simcons_register(void) { return 1; } +#else +int simcons_register(void); +#endif + +struct tty_driver; +extern struct tty_driver *hp_simserial_driver; + +void ia64_ssc_connect_irq(long intr, long irq); +void ia64_ctl_trace(long on); + +#endif diff --git a/arch/ia64/include/asm/hugetlb.h b/arch/ia64/include/asm/hugetlb.h new file mode 100644 index 000000000000..da55c63728e0 --- /dev/null +++ b/arch/ia64/include/asm/hugetlb.h @@ -0,0 +1,80 @@ +#ifndef _ASM_IA64_HUGETLB_H +#define _ASM_IA64_HUGETLB_H + +#include + + +void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, + unsigned long end, unsigned long floor, + unsigned long ceiling); + +int prepare_hugepage_range(struct file *file, + unsigned long addr, unsigned long len); + +static inline int is_hugepage_only_range(struct mm_struct *mm, + unsigned long addr, + unsigned long len) +{ + return (REGION_NUMBER(addr) == RGN_HPAGE || + REGION_NUMBER((addr)+(len)-1) == RGN_HPAGE); +} + +static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) +{ +} + +static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ + set_pte_at(mm, addr, ptep, pte); +} + +static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + return ptep_get_and_clear(mm, addr, ptep); +} + +static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ +} + +static inline int huge_pte_none(pte_t pte) +{ + return pte_none(pte); +} + +static inline pte_t huge_pte_wrprotect(pte_t pte) +{ + return pte_wrprotect(pte); +} + +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + ptep_set_wrprotect(mm, addr, ptep); +} + +static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, + pte_t pte, int dirty) +{ + return ptep_set_access_flags(vma, addr, ptep, pte, dirty); +} + +static inline pte_t huge_ptep_get(pte_t *ptep) +{ + return *ptep; +} + +static inline int arch_prepare_hugepage(struct page *page) +{ + return 0; +} + +static inline void arch_release_hugepage(struct page *page) +{ +} + +#endif /* _ASM_IA64_HUGETLB_H */ diff --git a/arch/ia64/include/asm/hw_irq.h b/arch/ia64/include/asm/hw_irq.h new file mode 100644 index 000000000000..5c99cbcb8a0d --- /dev/null +++ b/arch/ia64/include/asm/hw_irq.h @@ -0,0 +1,192 @@ +#ifndef _ASM_IA64_HW_IRQ_H +#define _ASM_IA64_HW_IRQ_H + +/* + * Copyright (C) 2001-2003 Hewlett-Packard Co + * David Mosberger-Tang + */ + +#include +#include +#include +#include + +#include +#include +#include + +#ifndef CONFIG_PARAVIRT +typedef u8 ia64_vector; +#else +typedef u16 ia64_vector; +#endif + +/* + * 0 special + * + * 1,3-14 are reserved from firmware + * + * 16-255 (vectored external interrupts) are available + * + * 15 spurious interrupt (see IVR) + * + * 16 lowest priority, 255 highest priority + * + * 15 classes of 16 interrupts each. + */ +#define IA64_MIN_VECTORED_IRQ 16 +#define IA64_MAX_VECTORED_IRQ 255 +#define IA64_NUM_VECTORS 256 + +#define AUTO_ASSIGN -1 + +#define IA64_SPURIOUS_INT_VECTOR 0x0f + +/* + * Vectors 0x10-0x1f are used for low priority interrupts, e.g. CMCI. + */ +#define IA64_CPEP_VECTOR 0x1c /* corrected platform error polling vector */ +#define IA64_CMCP_VECTOR 0x1d /* corrected machine-check polling vector */ +#define IA64_CPE_VECTOR 0x1e /* corrected platform error interrupt vector */ +#define IA64_CMC_VECTOR 0x1f /* corrected machine-check interrupt vector */ +/* + * Vectors 0x20-0x2f are reserved for legacy ISA IRQs. + * Use vectors 0x30-0xe7 as the default device vector range for ia64. + * Platforms may choose to reduce this range in platform_irq_setup, but the + * platform range must fall within + * [IA64_DEF_FIRST_DEVICE_VECTOR..IA64_DEF_LAST_DEVICE_VECTOR] + */ +extern int ia64_first_device_vector; +extern int ia64_last_device_vector; + +#define IA64_DEF_FIRST_DEVICE_VECTOR 0x30 +#define IA64_DEF_LAST_DEVICE_VECTOR 0xe7 +#define IA64_FIRST_DEVICE_VECTOR ia64_first_device_vector +#define IA64_LAST_DEVICE_VECTOR ia64_last_device_vector +#define IA64_MAX_DEVICE_VECTORS (IA64_DEF_LAST_DEVICE_VECTOR - IA64_DEF_FIRST_DEVICE_VECTOR + 1) +#define IA64_NUM_DEVICE_VECTORS (IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1) + +#define IA64_MCA_RENDEZ_VECTOR 0xe8 /* MCA rendez interrupt */ +#define IA64_PERFMON_VECTOR 0xee /* performance monitor interrupt vector */ +#define IA64_TIMER_VECTOR 0xef /* use highest-prio group 15 interrupt for timer */ +#define IA64_MCA_WAKEUP_VECTOR 0xf0 /* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */ +#define IA64_IPI_LOCAL_TLB_FLUSH 0xfc /* SMP flush local TLB */ +#define IA64_IPI_RESCHEDULE 0xfd /* SMP reschedule */ +#define IA64_IPI_VECTOR 0xfe /* inter-processor interrupt vector */ + +/* Used for encoding redirected irqs */ + +#define IA64_IRQ_REDIRECTED (1 << 31) + +/* IA64 inter-cpu interrupt related definitions */ + +#define IA64_IPI_DEFAULT_BASE_ADDR 0xfee00000 + +/* Delivery modes for inter-cpu interrupts */ +enum { + IA64_IPI_DM_INT = 0x0, /* pend an external interrupt */ + IA64_IPI_DM_PMI = 0x2, /* pend a PMI */ + IA64_IPI_DM_NMI = 0x4, /* pend an NMI (vector 2) */ + IA64_IPI_DM_INIT = 0x5, /* pend an INIT interrupt */ + IA64_IPI_DM_EXTINT = 0x7, /* pend an 8259-compatible interrupt. */ +}; + +extern __u8 isa_irq_to_vector_map[16]; +#define isa_irq_to_vector(x) isa_irq_to_vector_map[(x)] + +struct irq_cfg { + ia64_vector vector; + cpumask_t domain; + cpumask_t old_domain; + unsigned move_cleanup_count; + u8 move_in_progress : 1; +}; +extern spinlock_t vector_lock; +extern struct irq_cfg irq_cfg[NR_IRQS]; +#define irq_to_domain(x) irq_cfg[(x)].domain +DECLARE_PER_CPU(int[IA64_NUM_VECTORS], vector_irq); + +extern struct hw_interrupt_type irq_type_ia64_lsapic; /* CPU-internal interrupt controller */ + +#ifdef CONFIG_PARAVIRT_GUEST +#include +#else +#define ia64_register_ipi ia64_native_register_ipi +#define assign_irq_vector ia64_native_assign_irq_vector +#define free_irq_vector ia64_native_free_irq_vector +#define register_percpu_irq ia64_native_register_percpu_irq +#define ia64_resend_irq ia64_native_resend_irq +#endif + +extern void ia64_native_register_ipi(void); +extern int bind_irq_vector(int irq, int vector, cpumask_t domain); +extern int ia64_native_assign_irq_vector (int irq); /* allocate a free vector */ +extern void ia64_native_free_irq_vector (int vector); +extern int reserve_irq_vector (int vector); +extern void __setup_vector_irq(int cpu); +extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect); +extern void ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action); +extern int check_irq_used (int irq); +extern void destroy_and_reserve_irq (unsigned int irq); + +#if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG)) +extern int irq_prepare_move(int irq, int cpu); +extern void irq_complete_move(unsigned int irq); +#else +static inline int irq_prepare_move(int irq, int cpu) { return 0; } +static inline void irq_complete_move(unsigned int irq) {} +#endif + +static inline void ia64_native_resend_irq(unsigned int vector) +{ + platform_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0); +} + +/* + * Default implementations for the irq-descriptor API: + */ + +extern irq_desc_t irq_desc[NR_IRQS]; + +#ifndef CONFIG_IA64_GENERIC +static inline ia64_vector __ia64_irq_to_vector(int irq) +{ + return irq_cfg[irq].vector; +} + +static inline unsigned int +__ia64_local_vector_to_irq (ia64_vector vec) +{ + return __get_cpu_var(vector_irq)[vec]; +} +#endif + +/* + * Next follows the irq descriptor interface. On IA-64, each CPU supports 256 interrupt + * vectors. On smaller systems, there is a one-to-one correspondence between interrupt + * vectors and the Linux irq numbers. However, larger systems may have multiple interrupt + * domains meaning that the translation from vector number to irq number depends on the + * interrupt domain that a CPU belongs to. This API abstracts such platform-dependent + * differences and provides a uniform means to translate between vector and irq numbers + * and to obtain the irq descriptor for a given irq number. + */ + +/* Extract the IA-64 vector that corresponds to IRQ. */ +static inline ia64_vector +irq_to_vector (int irq) +{ + return platform_irq_to_vector(irq); +} + +/* + * Convert the local IA-64 vector to the corresponding irq number. This translation is + * done in the context of the interrupt domain that the currently executing CPU belongs + * to. + */ +static inline unsigned int +local_vector_to_irq (ia64_vector vec) +{ + return platform_local_vector_to_irq(vec); +} + +#endif /* _ASM_IA64_HW_IRQ_H */ diff --git a/arch/ia64/include/asm/ia32.h b/arch/ia64/include/asm/ia32.h new file mode 100644 index 000000000000..2390ee145aa1 --- /dev/null +++ b/arch/ia64/include/asm/ia32.h @@ -0,0 +1,40 @@ +#ifndef _ASM_IA64_IA32_H +#define _ASM_IA64_IA32_H + + +#include +#include + +#define IA32_NR_syscalls 285 /* length of syscall table */ +#define IA32_PAGE_SHIFT 12 /* 4KB pages */ + +#ifndef __ASSEMBLY__ + +# ifdef CONFIG_IA32_SUPPORT + +#define IA32_PAGE_OFFSET 0xc0000000 + +extern void ia32_cpu_init (void); +extern void ia32_mem_init (void); +extern void ia32_gdt_init (void); +extern int ia32_exception (struct pt_regs *regs, unsigned long isr); +extern int ia32_intercept (struct pt_regs *regs, unsigned long isr); +extern int ia32_clone_tls (struct task_struct *child, struct pt_regs *childregs); + +# endif /* !CONFIG_IA32_SUPPORT */ + +/* Declare this unconditionally, so we don't get warnings for unreachable code. */ +extern int ia32_setup_frame1 (int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs); +#if PAGE_SHIFT > IA32_PAGE_SHIFT +extern int ia32_copy_ia64_partial_page_list(struct task_struct *, + unsigned long); +extern void ia32_drop_ia64_partial_page_list(struct task_struct *); +#else +# define ia32_copy_ia64_partial_page_list(a1, a2) 0 +# define ia32_drop_ia64_partial_page_list(a1) do { ; } while (0) +#endif + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_IA64_IA32_H */ diff --git a/arch/ia64/include/asm/ia64regs.h b/arch/ia64/include/asm/ia64regs.h new file mode 100644 index 000000000000..1757f1c11ad4 --- /dev/null +++ b/arch/ia64/include/asm/ia64regs.h @@ -0,0 +1,100 @@ +/* + * Copyright (C) 2002,2003 Intel Corp. + * Jun Nakajima + * Suresh Siddha + */ + +#ifndef _ASM_IA64_IA64REGS_H +#define _ASM_IA64_IA64REGS_H + +/* + * Register Names for getreg() and setreg(). + * + * The "magic" numbers happen to match the values used by the Intel compiler's + * getreg()/setreg() intrinsics. + */ + +/* Special Registers */ + +#define _IA64_REG_IP 1016 /* getreg only */ +#define _IA64_REG_PSR 1019 +#define _IA64_REG_PSR_L 1019 + +/* General Integer Registers */ + +#define _IA64_REG_GP 1025 /* R1 */ +#define _IA64_REG_R8 1032 /* R8 */ +#define _IA64_REG_R9 1033 /* R9 */ +#define _IA64_REG_SP 1036 /* R12 */ +#define _IA64_REG_TP 1037 /* R13 */ + +/* Application Registers */ + +#define _IA64_REG_AR_KR0 3072 +#define _IA64_REG_AR_KR1 3073 +#define _IA64_REG_AR_KR2 3074 +#define _IA64_REG_AR_KR3 3075 +#define _IA64_REG_AR_KR4 3076 +#define _IA64_REG_AR_KR5 3077 +#define _IA64_REG_AR_KR6 3078 +#define _IA64_REG_AR_KR7 3079 +#define _IA64_REG_AR_RSC 3088 +#define _IA64_REG_AR_BSP 3089 +#define _IA64_REG_AR_BSPSTORE 3090 +#define _IA64_REG_AR_RNAT 3091 +#define _IA64_REG_AR_FCR 3093 +#define _IA64_REG_AR_EFLAG 3096 +#define _IA64_REG_AR_CSD 3097 +#define _IA64_REG_AR_SSD 3098 +#define _IA64_REG_AR_CFLAG 3099 +#define _IA64_REG_AR_FSR 3100 +#define _IA64_REG_AR_FIR 3101 +#define _IA64_REG_AR_FDR 3102 +#define _IA64_REG_AR_CCV 3104 +#define _IA64_REG_AR_UNAT 3108 +#define _IA64_REG_AR_FPSR 3112 +#define _IA64_REG_AR_ITC 3116 +#define _IA64_REG_AR_PFS 3136 +#define _IA64_REG_AR_LC 3137 +#define _IA64_REG_AR_EC 3138 + +/* Control Registers */ + +#define _IA64_REG_CR_DCR 4096 +#define _IA64_REG_CR_ITM 4097 +#define _IA64_REG_CR_IVA 4098 +#define _IA64_REG_CR_PTA 4104 +#define _IA64_REG_CR_IPSR 4112 +#define _IA64_REG_CR_ISR 4113 +#define _IA64_REG_CR_IIP 4115 +#define _IA64_REG_CR_IFA 4116 +#define _IA64_REG_CR_ITIR 4117 +#define _IA64_REG_CR_IIPA 4118 +#define _IA64_REG_CR_IFS 4119 +#define _IA64_REG_CR_IIM 4120 +#define _IA64_REG_CR_IHA 4121 +#define _IA64_REG_CR_LID 4160 +#define _IA64_REG_CR_IVR 4161 /* getreg only */ +#define _IA64_REG_CR_TPR 4162 +#define _IA64_REG_CR_EOI 4163 +#define _IA64_REG_CR_IRR0 4164 /* getreg only */ +#define _IA64_REG_CR_IRR1 4165 /* getreg only */ +#define _IA64_REG_CR_IRR2 4166 /* getreg only */ +#define _IA64_REG_CR_IRR3 4167 /* getreg only */ +#define _IA64_REG_CR_ITV 4168 +#define _IA64_REG_CR_PMV 4169 +#define _IA64_REG_CR_CMCV 4170 +#define _IA64_REG_CR_LRR0 4176 +#define _IA64_REG_CR_LRR1 4177 + +/* Indirect Registers for getindreg() and setindreg() */ + +#define _IA64_REG_INDR_CPUID 9000 /* getindreg only */ +#define _IA64_REG_INDR_DBR 9001 +#define _IA64_REG_INDR_IBR 9002 +#define _IA64_REG_INDR_PKR 9003 +#define _IA64_REG_INDR_PMC 9004 +#define _IA64_REG_INDR_PMD 9005 +#define _IA64_REG_INDR_RR 9006 + +#endif /* _ASM_IA64_IA64REGS_H */ diff --git a/arch/ia64/include/asm/intel_intrin.h b/arch/ia64/include/asm/intel_intrin.h new file mode 100644 index 000000000000..53cec577558a --- /dev/null +++ b/arch/ia64/include/asm/intel_intrin.h @@ -0,0 +1,161 @@ +#ifndef _ASM_IA64_INTEL_INTRIN_H +#define _ASM_IA64_INTEL_INTRIN_H +/* + * Intel Compiler Intrinsics + * + * Copyright (C) 2002,2003 Jun Nakajima + * Copyright (C) 2002,2003 Suresh Siddha + * Copyright (C) 2005,2006 Hongjiu Lu + * + */ +#include + +#define ia64_barrier() __memory_barrier() + +#define ia64_stop() /* Nothing: As of now stop bit is generated for each + * intrinsic + */ + +#define ia64_native_getreg __getReg +#define ia64_native_setreg __setReg + +#define ia64_hint __hint +#define ia64_hint_pause __hint_pause + +#define ia64_mux1_brcst _m64_mux1_brcst +#define ia64_mux1_mix _m64_mux1_mix +#define ia64_mux1_shuf _m64_mux1_shuf +#define ia64_mux1_alt _m64_mux1_alt +#define ia64_mux1_rev _m64_mux1_rev + +#define ia64_mux1(x,v) _m_to_int64(_m64_mux1(_m_from_int64(x), (v))) +#define ia64_popcnt _m64_popcnt +#define ia64_getf_exp __getf_exp +#define ia64_shrp _m64_shrp + +#define ia64_tpa __tpa +#define ia64_invala __invala +#define ia64_invala_gr __invala_gr +#define ia64_invala_fr __invala_fr +#define ia64_nop __nop +#define ia64_sum __sum +#define ia64_native_ssm __ssm +#define ia64_rum __rum +#define ia64_native_rsm __rsm +#define ia64_native_fc __fc + +#define ia64_ldfs __ldfs +#define ia64_ldfd __ldfd +#define ia64_ldfe __ldfe +#define ia64_ldf8 __ldf8 +#define ia64_ldf_fill __ldf_fill + +#define ia64_stfs __stfs +#define ia64_stfd __stfd +#define ia64_stfe __stfe +#define ia64_stf8 __stf8 +#define ia64_stf_spill __stf_spill + +#define ia64_mf __mf +#define ia64_mfa __mfa + +#define ia64_fetchadd4_acq __fetchadd4_acq +#define ia64_fetchadd4_rel __fetchadd4_rel +#define ia64_fetchadd8_acq __fetchadd8_acq +#define ia64_fetchadd8_rel __fetchadd8_rel + +#define ia64_xchg1 _InterlockedExchange8 +#define ia64_xchg2 _InterlockedExchange16 +#define ia64_xchg4 _InterlockedExchange +#define ia64_xchg8 _InterlockedExchange64 + +#define ia64_cmpxchg1_rel _InterlockedCompareExchange8_rel +#define ia64_cmpxchg1_acq _InterlockedCompareExchange8_acq +#define ia64_cmpxchg2_rel _InterlockedCompareExchange16_rel +#define ia64_cmpxchg2_acq _InterlockedCompareExchange16_acq +#define ia64_cmpxchg4_rel _InterlockedCompareExchange_rel +#define ia64_cmpxchg4_acq _InterlockedCompareExchange_acq +#define ia64_cmpxchg8_rel _InterlockedCompareExchange64_rel +#define ia64_cmpxchg8_acq _InterlockedCompareExchange64_acq + +#define __ia64_set_dbr(index, val) \ + __setIndReg(_IA64_REG_INDR_DBR, index, val) +#define ia64_set_ibr(index, val) \ + __setIndReg(_IA64_REG_INDR_IBR, index, val) +#define ia64_set_pkr(index, val) \ + __setIndReg(_IA64_REG_INDR_PKR, index, val) +#define ia64_set_pmc(index, val) \ + __setIndReg(_IA64_REG_INDR_PMC, index, val) +#define ia64_set_pmd(index, val) \ + __setIndReg(_IA64_REG_INDR_PMD, index, val) +#define ia64_native_set_rr(index, val) \ + __setIndReg(_IA64_REG_INDR_RR, index, val) + +#define ia64_native_get_cpuid(index) \ + __getIndReg(_IA64_REG_INDR_CPUID, index) +#define __ia64_get_dbr(index) __getIndReg(_IA64_REG_INDR_DBR, index) +#define ia64_get_ibr(index) __getIndReg(_IA64_REG_INDR_IBR, index) +#define ia64_get_pkr(index) __getIndReg(_IA64_REG_INDR_PKR, index) +#define ia64_get_pmc(index) __getIndReg(_IA64_REG_INDR_PMC, index) +#define ia64_native_get_pmd(index) __getIndReg(_IA64_REG_INDR_PMD, index) +#define ia64_native_get_rr(index) __getIndReg(_IA64_REG_INDR_RR, index) + +#define ia64_srlz_d __dsrlz +#define ia64_srlz_i __isrlz + +#define ia64_dv_serialize_data() +#define ia64_dv_serialize_instruction() + +#define ia64_st1_rel __st1_rel +#define ia64_st2_rel __st2_rel +#define ia64_st4_rel __st4_rel +#define ia64_st8_rel __st8_rel + +/* FIXME: need st4.rel.nta intrinsic */ +#define ia64_st4_rel_nta __st4_rel + +#define ia64_ld1_acq __ld1_acq +#define ia64_ld2_acq __ld2_acq +#define ia64_ld4_acq __ld4_acq +#define ia64_ld8_acq __ld8_acq + +#define ia64_sync_i __synci +#define ia64_native_thash __thash +#define ia64_native_ttag __ttag +#define ia64_itcd __itcd +#define ia64_itci __itci +#define ia64_itrd __itrd +#define ia64_itri __itri +#define ia64_ptce __ptce +#define ia64_ptcl __ptcl +#define ia64_native_ptcg __ptcg +#define ia64_native_ptcga __ptcga +#define ia64_ptri __ptri +#define ia64_ptrd __ptrd +#define ia64_dep_mi _m64_dep_mi + +/* Values for lfhint in __lfetch and __lfetch_fault */ + +#define ia64_lfhint_none __lfhint_none +#define ia64_lfhint_nt1 __lfhint_nt1 +#define ia64_lfhint_nt2 __lfhint_nt2 +#define ia64_lfhint_nta __lfhint_nta + +#define ia64_lfetch __lfetch +#define ia64_lfetch_excl __lfetch_excl +#define ia64_lfetch_fault __lfetch_fault +#define ia64_lfetch_fault_excl __lfetch_fault_excl + +#define ia64_native_intrin_local_irq_restore(x) \ +do { \ + if ((x) != 0) { \ + ia64_native_ssm(IA64_PSR_I); \ + ia64_srlz_d(); \ + } else { \ + ia64_native_rsm(IA64_PSR_I); \ + } \ +} while (0) + +#define __builtin_trap() __break(0); + +#endif /* _ASM_IA64_INTEL_INTRIN_H */ diff --git a/arch/ia64/include/asm/intrinsics.h b/arch/ia64/include/asm/intrinsics.h new file mode 100644 index 000000000000..47d686dba1eb --- /dev/null +++ b/arch/ia64/include/asm/intrinsics.h @@ -0,0 +1,241 @@ +#ifndef _ASM_IA64_INTRINSICS_H +#define _ASM_IA64_INTRINSICS_H + +/* + * Compiler-dependent intrinsics. + * + * Copyright (C) 2002-2003 Hewlett-Packard Co + * David Mosberger-Tang + */ + +#ifndef __ASSEMBLY__ + +/* include compiler specific intrinsics */ +#include +#ifdef __INTEL_COMPILER +# include +#else +# include +#endif + +#define ia64_native_get_psr_i() (ia64_native_getreg(_IA64_REG_PSR) & IA64_PSR_I) + +#define ia64_native_set_rr0_to_rr4(val0, val1, val2, val3, val4) \ +do { \ + ia64_native_set_rr(0x0000000000000000UL, (val0)); \ + ia64_native_set_rr(0x2000000000000000UL, (val1)); \ + ia64_native_set_rr(0x4000000000000000UL, (val2)); \ + ia64_native_set_rr(0x6000000000000000UL, (val3)); \ + ia64_native_set_rr(0x8000000000000000UL, (val4)); \ +} while (0) + +/* + * Force an unresolved reference if someone tries to use + * ia64_fetch_and_add() with a bad value. + */ +extern unsigned long __bad_size_for_ia64_fetch_and_add (void); +extern unsigned long __bad_increment_for_ia64_fetch_and_add (void); + +#define IA64_FETCHADD(tmp,v,n,sz,sem) \ +({ \ + switch (sz) { \ + case 4: \ + tmp = ia64_fetchadd4_##sem((unsigned int *) v, n); \ + break; \ + \ + case 8: \ + tmp = ia64_fetchadd8_##sem((unsigned long *) v, n); \ + break; \ + \ + default: \ + __bad_size_for_ia64_fetch_and_add(); \ + } \ +}) + +#define ia64_fetchadd(i,v,sem) \ +({ \ + __u64 _tmp; \ + volatile __typeof__(*(v)) *_v = (v); \ + /* Can't use a switch () here: gcc isn't always smart enough for that... */ \ + if ((i) == -16) \ + IA64_FETCHADD(_tmp, _v, -16, sizeof(*(v)), sem); \ + else if ((i) == -8) \ + IA64_FETCHADD(_tmp, _v, -8, sizeof(*(v)), sem); \ + else if ((i) == -4) \ + IA64_FETCHADD(_tmp, _v, -4, sizeof(*(v)), sem); \ + else if ((i) == -1) \ + IA64_FETCHADD(_tmp, _v, -1, sizeof(*(v)), sem); \ + else if ((i) == 1) \ + IA64_FETCHADD(_tmp, _v, 1, sizeof(*(v)), sem); \ + else if ((i) == 4) \ + IA64_FETCHADD(_tmp, _v, 4, sizeof(*(v)), sem); \ + else if ((i) == 8) \ + IA64_FETCHADD(_tmp, _v, 8, sizeof(*(v)), sem); \ + else if ((i) == 16) \ + IA64_FETCHADD(_tmp, _v, 16, sizeof(*(v)), sem); \ + else \ + _tmp = __bad_increment_for_ia64_fetch_and_add(); \ + (__typeof__(*(v))) (_tmp); /* return old value */ \ +}) + +#define ia64_fetch_and_add(i,v) (ia64_fetchadd(i, v, rel) + (i)) /* return new value */ + +/* + * This function doesn't exist, so you'll get a linker error if + * something tries to do an invalid xchg(). + */ +extern void ia64_xchg_called_with_bad_pointer (void); + +#define __xchg(x,ptr,size) \ +({ \ + unsigned long __xchg_result; \ + \ + switch (size) { \ + case 1: \ + __xchg_result = ia64_xchg1((__u8 *)ptr, x); \ + break; \ + \ + case 2: \ + __xchg_result = ia64_xchg2((__u16 *)ptr, x); \ + break; \ + \ + case 4: \ + __xchg_result = ia64_xchg4((__u32 *)ptr, x); \ + break; \ + \ + case 8: \ + __xchg_result = ia64_xchg8((__u64 *)ptr, x); \ + break; \ + default: \ + ia64_xchg_called_with_bad_pointer(); \ + } \ + __xchg_result; \ +}) + +#define xchg(ptr,x) \ + ((__typeof__(*(ptr))) __xchg ((unsigned long) (x), (ptr), sizeof(*(ptr)))) + +/* + * Atomic compare and exchange. Compare OLD with MEM, if identical, + * store NEW in MEM. Return the initial value in MEM. Success is + * indicated by comparing RETURN with OLD. + */ + +#define __HAVE_ARCH_CMPXCHG 1 + +/* + * This function doesn't exist, so you'll get a linker error + * if something tries to do an invalid cmpxchg(). + */ +extern long ia64_cmpxchg_called_with_bad_pointer (void); + +#define ia64_cmpxchg(sem,ptr,old,new,size) \ +({ \ + __u64 _o_, _r_; \ + \ + switch (size) { \ + case 1: _o_ = (__u8 ) (long) (old); break; \ + case 2: _o_ = (__u16) (long) (old); break; \ + case 4: _o_ = (__u32) (long) (old); break; \ + case 8: _o_ = (__u64) (long) (old); break; \ + default: break; \ + } \ + switch (size) { \ + case 1: \ + _r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_); \ + break; \ + \ + case 2: \ + _r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_); \ + break; \ + \ + case 4: \ + _r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_); \ + break; \ + \ + case 8: \ + _r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_); \ + break; \ + \ + default: \ + _r_ = ia64_cmpxchg_called_with_bad_pointer(); \ + break; \ + } \ + (__typeof__(old)) _r_; \ +}) + +#define cmpxchg_acq(ptr, o, n) \ + ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr))) +#define cmpxchg_rel(ptr, o, n) \ + ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr))) + +/* for compatibility with other platforms: */ +#define cmpxchg(ptr, o, n) cmpxchg_acq((ptr), (o), (n)) +#define cmpxchg64(ptr, o, n) cmpxchg_acq((ptr), (o), (n)) + +#define cmpxchg_local cmpxchg +#define cmpxchg64_local cmpxchg64 + +#ifdef CONFIG_IA64_DEBUG_CMPXCHG +# define CMPXCHG_BUGCHECK_DECL int _cmpxchg_bugcheck_count = 128; +# define CMPXCHG_BUGCHECK(v) \ + do { \ + if (_cmpxchg_bugcheck_count-- <= 0) { \ + void *ip; \ + extern int printk(const char *fmt, ...); \ + ip = (void *) ia64_getreg(_IA64_REG_IP); \ + printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v)); \ + break; \ + } \ + } while (0) +#else /* !CONFIG_IA64_DEBUG_CMPXCHG */ +# define CMPXCHG_BUGCHECK_DECL +# define CMPXCHG_BUGCHECK(v) +#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */ + +#endif + +#ifdef __KERNEL__ +#include +#endif + +#ifndef __ASSEMBLY__ +#if defined(CONFIG_PARAVIRT) && defined(__KERNEL__) +#define IA64_INTRINSIC_API(name) pv_cpu_ops.name +#define IA64_INTRINSIC_MACRO(name) paravirt_ ## name +#else +#define IA64_INTRINSIC_API(name) ia64_native_ ## name +#define IA64_INTRINSIC_MACRO(name) ia64_native_ ## name +#endif + +/************************************************/ +/* Instructions paravirtualized for correctness */ +/************************************************/ +/* fc, thash, get_cpuid, get_pmd, get_eflags, set_eflags */ +/* Note that "ttag" and "cover" are also privilege-sensitive; "ttag" + * is not currently used (though it may be in a long-format VHPT system!) + */ +#define ia64_fc IA64_INTRINSIC_API(fc) +#define ia64_thash IA64_INTRINSIC_API(thash) +#define ia64_get_cpuid IA64_INTRINSIC_API(get_cpuid) +#define ia64_get_pmd IA64_INTRINSIC_API(get_pmd) + + +/************************************************/ +/* Instructions paravirtualized for performance */ +/************************************************/ +#define ia64_ssm IA64_INTRINSIC_MACRO(ssm) +#define ia64_rsm IA64_INTRINSIC_MACRO(rsm) +#define ia64_getreg IA64_INTRINSIC_API(getreg) +#define ia64_setreg IA64_INTRINSIC_API(setreg) +#define ia64_set_rr IA64_INTRINSIC_API(set_rr) +#define ia64_get_rr IA64_INTRINSIC_API(get_rr) +#define ia64_ptcga IA64_INTRINSIC_API(ptcga) +#define ia64_get_psr_i IA64_INTRINSIC_API(get_psr_i) +#define ia64_intrin_local_irq_restore \ + IA64_INTRINSIC_API(intrin_local_irq_restore) +#define ia64_set_rr0_to_rr4 IA64_INTRINSIC_API(set_rr0_to_rr4) + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_IA64_INTRINSICS_H */ diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h new file mode 100644 index 000000000000..260a85ac9d6a --- /dev/null +++ b/arch/ia64/include/asm/io.h @@ -0,0 +1,459 @@ +#ifndef _ASM_IA64_IO_H +#define _ASM_IA64_IO_H + +/* + * This file contains the definitions for the emulated IO instructions + * inb/inw/inl/outb/outw/outl and the "string versions" of the same + * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" + * versions of the single-IO instructions (inb_p/inw_p/..). + * + * This file is not meant to be obfuscating: it's just complicated to + * (a) handle it all in a way that makes gcc able to optimize it as + * well as possible and (b) trying to avoid writing the same thing + * over and over again with slight variations and possibly making a + * mistake somewhere. + * + * Copyright (C) 1998-2003 Hewlett-Packard Co + * David Mosberger-Tang + * Copyright (C) 1999 Asit Mallick + * Copyright (C) 1999 Don Dugger + */ + +/* We don't use IO slowdowns on the ia64, but.. */ +#define __SLOW_DOWN_IO do { } while (0) +#define SLOW_DOWN_IO do { } while (0) + +#define __IA64_UNCACHED_OFFSET RGN_BASE(RGN_UNCACHED) + +/* + * The legacy I/O space defined by the ia64 architecture supports only 65536 ports, but + * large machines may have multiple other I/O spaces so we can't place any a priori limit + * on IO_SPACE_LIMIT. These additional spaces are described in ACPI. + */ +#define IO_SPACE_LIMIT 0xffffffffffffffffUL + +#define MAX_IO_SPACES_BITS 8 +#define MAX_IO_SPACES (1UL << MAX_IO_SPACES_BITS) +#define IO_SPACE_BITS 24 +#define IO_SPACE_SIZE (1UL << IO_SPACE_BITS) + +#define IO_SPACE_NR(port) ((port) >> IO_SPACE_BITS) +#define IO_SPACE_BASE(space) ((space) << IO_SPACE_BITS) +#define IO_SPACE_PORT(port) ((port) & (IO_SPACE_SIZE - 1)) + +#define IO_SPACE_SPARSE_ENCODING(p) ((((p) >> 2) << 12) | ((p) & 0xfff)) + +struct io_space { + unsigned long mmio_base; /* base in MMIO space */ + int sparse; +}; + +extern struct io_space io_space[]; +extern unsigned int num_io_spaces; + +# ifdef __KERNEL__ + +/* + * All MMIO iomem cookies are in region 6; anything less is a PIO cookie: + * 0xCxxxxxxxxxxxxxxx MMIO cookie (return from ioremap) + * 0x000000001SPPPPPP PIO cookie (S=space number, P..P=port) + * + * ioread/writeX() uses the leading 1 in PIO cookies (PIO_OFFSET) to catch + * code that uses bare port numbers without the prerequisite pci_iomap(). + */ +#define PIO_OFFSET (1UL << (MAX_IO_SPACES_BITS + IO_SPACE_BITS)) +#define PIO_MASK (PIO_OFFSET - 1) +#define PIO_RESERVED __IA64_UNCACHED_OFFSET +#define HAVE_ARCH_PIO_SIZE + +#include +#include +#include +#include +#include + +/* + * Change virtual addresses to physical addresses and vv. + */ +static inline unsigned long +virt_to_phys (volatile void *address) +{ + return (unsigned long) address - PAGE_OFFSET; +} + +static inline void* +phys_to_virt (unsigned long address) +{ + return (void *) (address + PAGE_OFFSET); +} + +#define ARCH_HAS_VALID_PHYS_ADDR_RANGE +extern u64 kern_mem_attribute (unsigned long phys_addr, unsigned long size); +extern int valid_phys_addr_range (unsigned long addr, size_t count); /* efi.c */ +extern int valid_mmap_phys_addr_range (unsigned long pfn, size_t count); + +/* + * The following two macros are deprecated and scheduled for removal. + * Please use the PCI-DMA interface defined in instead. + */ +#define bus_to_virt phys_to_virt +#define virt_to_bus virt_to_phys +#define page_to_bus page_to_phys + +# endif /* KERNEL */ + +/* + * Memory fence w/accept. This should never be used in code that is + * not IA-64 specific. + */ +#define __ia64_mf_a() ia64_mfa() + +/** + * ___ia64_mmiowb - I/O write barrier + * + * Ensure ordering of I/O space writes. This will make sure that writes + * following the barrier will arrive after all previous writes. For most + * ia64 platforms, this is a simple 'mf.a' instruction. + * + * See Documentation/DocBook/deviceiobook.tmpl for more information. + */ +static inline void ___ia64_mmiowb(void) +{ + ia64_mfa(); +} + +static inline void* +__ia64_mk_io_addr (unsigned long port) +{ + struct io_space *space; + unsigned long offset; + + space = &io_space[IO_SPACE_NR(port)]; + port = IO_SPACE_PORT(port); + if (space->sparse) + offset = IO_SPACE_SPARSE_ENCODING(port); + else + offset = port; + + return (void *) (space->mmio_base | offset); +} + +#define __ia64_inb ___ia64_inb +#define __ia64_inw ___ia64_inw +#define __ia64_inl ___ia64_inl +#define __ia64_outb ___ia64_outb +#define __ia64_outw ___ia64_outw +#define __ia64_outl ___ia64_outl +#define __ia64_readb ___ia64_readb +#define __ia64_readw ___ia64_readw +#define __ia64_readl ___ia64_readl +#define __ia64_readq ___ia64_readq +#define __ia64_readb_relaxed ___ia64_readb +#define __ia64_readw_relaxed ___ia64_readw +#define __ia64_readl_relaxed ___ia64_readl +#define __ia64_readq_relaxed ___ia64_readq +#define __ia64_writeb ___ia64_writeb +#define __ia64_writew ___ia64_writew +#define __ia64_writel ___ia64_writel +#define __ia64_writeq ___ia64_writeq +#define __ia64_mmiowb ___ia64_mmiowb + +/* + * For the in/out routines, we need to do "mf.a" _after_ doing the I/O access to ensure + * that the access has completed before executing other I/O accesses. Since we're doing + * the accesses through an uncachable (UC) translation, the CPU will execute them in + * program order. However, we still need to tell the compiler not to shuffle them around + * during optimization, which is why we use "volatile" pointers. + */ + +static inline unsigned int +___ia64_inb (unsigned long port) +{ + volatile unsigned char *addr = __ia64_mk_io_addr(port); + unsigned char ret; + + ret = *addr; + __ia64_mf_a(); + return ret; +} + +static inline unsigned int +___ia64_inw (unsigned long port) +{ + volatile unsigned short *addr = __ia64_mk_io_addr(port); + unsigned short ret; + + ret = *addr; + __ia64_mf_a(); + return ret; +} + +static inline unsigned int +___ia64_inl (unsigned long port) +{ + volatile unsigned int *addr = __ia64_mk_io_addr(port); + unsigned int ret; + + ret = *addr; + __ia64_mf_a(); + return ret; +} + +static inline void +___ia64_outb (unsigned char val, unsigned long port) +{ + volatile unsigned char *addr = __ia64_mk_io_addr(port); + + *addr = val; + __ia64_mf_a(); +} + +static inline void +___ia64_outw (unsigned short val, unsigned long port) +{ + volatile unsigned short *addr = __ia64_mk_io_addr(port); + + *addr = val; + __ia64_mf_a(); +} + +static inline void +___ia64_outl (unsigned int val, unsigned long port) +{ + volatile unsigned int *addr = __ia64_mk_io_addr(port); + + *addr = val; + __ia64_mf_a(); +} + +static inline void +__insb (unsigned long port, void *dst, unsigned long count) +{ + unsigned char *dp = dst; + + while (count--) + *dp++ = platform_inb(port); +} + +static inline void +__insw (unsigned long port, void *dst, unsigned long count) +{ + unsigned short *dp = dst; + + while (count--) + *dp++ = platform_inw(port); +} + +static inline void +__insl (unsigned long port, void *dst, unsigned long count) +{ + unsigned int *dp = dst; + + while (count--) + *dp++ = platform_inl(port); +} + +static inline void +__outsb (unsigned long port, const void *src, unsigned long count) +{ + const unsigned char *sp = src; + + while (count--) + platform_outb(*sp++, port); +} + +static inline void +__outsw (unsigned long port, const void *src, unsigned long count) +{ + const unsigned short *sp = src; + + while (count--) + platform_outw(*sp++, port); +} + +static inline void +__outsl (unsigned long port, const void *src, unsigned long count) +{ + const unsigned int *sp = src; + + while (count--) + platform_outl(*sp++, port); +} + +/* + * Unfortunately, some platforms are broken and do not follow the IA-64 architecture + * specification regarding legacy I/O support. Thus, we have to make these operations + * platform dependent... + */ +#define __inb platform_inb +#define __inw platform_inw +#define __inl platform_inl +#define __outb platform_outb +#define __outw platform_outw +#define __outl platform_outl +#define __mmiowb platform_mmiowb + +#define inb(p) __inb(p) +#define inw(p) __inw(p) +#define inl(p) __inl(p) +#define insb(p,d,c) __insb(p,d,c) +#define insw(p,d,c) __insw(p,d,c) +#define insl(p,d,c) __insl(p,d,c) +#define outb(v,p) __outb(v,p) +#define outw(v,p) __outw(v,p) +#define outl(v,p) __outl(v,p) +#define outsb(p,s,c) __outsb(p,s,c) +#define outsw(p,s,c) __outsw(p,s,c) +#define outsl(p,s,c) __outsl(p,s,c) +#define mmiowb() __mmiowb() + +/* + * The address passed to these functions are ioremap()ped already. + * + * We need these to be machine vectors since some platforms don't provide + * DMA coherence via PIO reads (PCI drivers and the spec imply that this is + * a good idea). Writes are ok though for all existing ia64 platforms (and + * hopefully it'll stay that way). + */ +static inline unsigned char +___ia64_readb (const volatile void __iomem *addr) +{ + return *(volatile unsigned char __force *)addr; +} + +static inline unsigned short +___ia64_readw (const volatile void __iomem *addr) +{ + return *(volatile unsigned short __force *)addr; +} + +static inline unsigned int +___ia64_readl (const volatile void __iomem *addr) +{ + return *(volatile unsigned int __force *) addr; +} + +static inline unsigned long +___ia64_readq (const volatile void __iomem *addr) +{ + return *(volatile unsigned long __force *) addr; +} + +static inline void +__writeb (unsigned char val, volatile void __iomem *addr) +{ + *(volatile unsigned char __force *) addr = val; +} + +static inline void +__writew (unsigned short val, volatile void __iomem *addr) +{ + *(volatile unsigned short __force *) addr = val; +} + +static inline void +__writel (unsigned int val, volatile void __iomem *addr) +{ + *(volatile unsigned int __force *) addr = val; +} + +static inline void +__writeq (unsigned long val, volatile void __iomem *addr) +{ + *(volatile unsigned long __force *) addr = val; +} + +#define __readb platform_readb +#define __readw platform_readw +#define __readl platform_readl +#define __readq platform_readq +#define __readb_relaxed platform_readb_relaxed +#define __readw_relaxed platform_readw_relaxed +#define __readl_relaxed platform_readl_relaxed +#define __readq_relaxed platform_readq_relaxed + +#define readb(a) __readb((a)) +#define readw(a) __readw((a)) +#define readl(a) __readl((a)) +#define readq(a) __readq((a)) +#define readb_relaxed(a) __readb_relaxed((a)) +#define readw_relaxed(a) __readw_relaxed((a)) +#define readl_relaxed(a) __readl_relaxed((a)) +#define readq_relaxed(a) __readq_relaxed((a)) +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl +#define __raw_readq readq +#define __raw_readb_relaxed readb_relaxed +#define __raw_readw_relaxed readw_relaxed +#define __raw_readl_relaxed readl_relaxed +#define __raw_readq_relaxed readq_relaxed +#define writeb(v,a) __writeb((v), (a)) +#define writew(v,a) __writew((v), (a)) +#define writel(v,a) __writel((v), (a)) +#define writeq(v,a) __writeq((v), (a)) +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel +#define __raw_writeq writeq + +#ifndef inb_p +# define inb_p inb +#endif +#ifndef inw_p +# define inw_p inw +#endif +#ifndef inl_p +# define inl_p inl +#endif + +#ifndef outb_p +# define outb_p outb +#endif +#ifndef outw_p +# define outw_p outw +#endif +#ifndef outl_p +# define outl_p outl +#endif + +# ifdef __KERNEL__ + +extern void __iomem * ioremap(unsigned long offset, unsigned long size); +extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size); +extern void iounmap (volatile void __iomem *addr); + +/* + * String version of IO memory access ops: + */ +extern void memcpy_fromio(void *dst, const volatile void __iomem *src, long n); +extern void memcpy_toio(volatile void __iomem *dst, const void *src, long n); +extern void memset_io(volatile void __iomem *s, int c, long n); + +# endif /* __KERNEL__ */ + +/* + * Enabling BIO_VMERGE_BOUNDARY forces us to turn off I/O MMU bypassing. It is said that + * BIO-level virtual merging can give up to 4% performance boost (not verified for ia64). + * On the other hand, we know that I/O MMU bypassing gives ~8% performance improvement on + * SPECweb-like workloads on zx1-based machines. Thus, for now we favor I/O MMU bypassing + * over BIO-level virtual merging. + */ +extern unsigned long ia64_max_iommu_merge_mask; +#if 1 +#define BIO_VMERGE_BOUNDARY 0 +#else +/* + * It makes no sense at all to have this BIO_VMERGE_BOUNDARY macro here. Should be + * replaced by dma_merge_mask() or something of that sort. Note: the only way + * BIO_VMERGE_BOUNDARY is used is to mask off bits. Effectively, our definition gets + * expanded into: + * + * addr & ((ia64_max_iommu_merge_mask + 1) - 1) == (addr & ia64_max_iommu_vmerge_mask) + * + * which is precisely what we want. + */ +#define BIO_VMERGE_BOUNDARY (ia64_max_iommu_merge_mask + 1) +#endif + +#endif /* _ASM_IA64_IO_H */ diff --git a/arch/ia64/include/asm/ioctl.h b/arch/ia64/include/asm/ioctl.h new file mode 100644 index 000000000000..b279fe06dfe5 --- /dev/null +++ b/arch/ia64/include/asm/ioctl.h @@ -0,0 +1 @@ +#include diff --git a/arch/ia64/include/asm/ioctls.h b/arch/ia64/include/asm/ioctls.h new file mode 100644 index 000000000000..f41b636a0bf6 --- /dev/null +++ b/arch/ia64/include/asm/ioctls.h @@ -0,0 +1,93 @@ +#ifndef _ASM_IA64_IOCTLS_H +#define _ASM_IA64_IOCTLS_H + +/* + * Based on + * + * Modified 1998, 1999, 2002 + * David Mosberger-Tang , Hewlett-Packard Co + */ + +#include + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */ +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ +#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ +#define FIOQSIZE 0x5460 + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* _ASM_IA64_IOCTLS_H */ diff --git a/arch/ia64/include/asm/iosapic.h b/arch/ia64/include/asm/iosapic.h new file mode 100644 index 000000000000..b9c102e15f22 --- /dev/null +++ b/arch/ia64/include/asm/iosapic.h @@ -0,0 +1,126 @@ +#ifndef __ASM_IA64_IOSAPIC_H +#define __ASM_IA64_IOSAPIC_H + +#define IOSAPIC_REG_SELECT 0x0 +#define IOSAPIC_WINDOW 0x10 +#define IOSAPIC_EOI 0x40 + +#define IOSAPIC_VERSION 0x1 + +/* + * Redirection table entry + */ +#define IOSAPIC_RTE_LOW(i) (0x10+i*2) +#define IOSAPIC_RTE_HIGH(i) (0x11+i*2) + +#define IOSAPIC_DEST_SHIFT 16 + +/* + * Delivery mode + */ +#define IOSAPIC_DELIVERY_SHIFT 8 +#define IOSAPIC_FIXED 0x0 +#define IOSAPIC_LOWEST_PRIORITY 0x1 +#define IOSAPIC_PMI 0x2 +#define IOSAPIC_NMI 0x4 +#define IOSAPIC_INIT 0x5 +#define IOSAPIC_EXTINT 0x7 + +/* + * Interrupt polarity + */ +#define IOSAPIC_POLARITY_SHIFT 13 +#define IOSAPIC_POL_HIGH 0 +#define IOSAPIC_POL_LOW 1 + +/* + * Trigger mode + */ +#define IOSAPIC_TRIGGER_SHIFT 15 +#define IOSAPIC_EDGE 0 +#define IOSAPIC_LEVEL 1 + +/* + * Mask bit + */ + +#define IOSAPIC_MASK_SHIFT 16 +#define IOSAPIC_MASK (1< +#else +#define iosapic_pcat_compat_init ia64_native_iosapic_pcat_compat_init +#define __iosapic_read __ia64_native_iosapic_read +#define __iosapic_write __ia64_native_iosapic_write +#define iosapic_get_irq_chip ia64_native_iosapic_get_irq_chip +#endif + +extern void __init ia64_native_iosapic_pcat_compat_init(void); +extern struct irq_chip *ia64_native_iosapic_get_irq_chip(unsigned long trigger); + +static inline unsigned int +__ia64_native_iosapic_read(char __iomem *iosapic, unsigned int reg) +{ + writel(reg, iosapic + IOSAPIC_REG_SELECT); + return readl(iosapic + IOSAPIC_WINDOW); +} + +static inline void +__ia64_native_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val) +{ + writel(reg, iosapic + IOSAPIC_REG_SELECT); + writel(val, iosapic + IOSAPIC_WINDOW); +} + +static inline void iosapic_eoi(char __iomem *iosapic, u32 vector) +{ + writel(vector, iosapic + IOSAPIC_EOI); +} + +extern void __init iosapic_system_init (int pcat_compat); +extern int __devinit iosapic_init (unsigned long address, + unsigned int gsi_base); +#ifdef CONFIG_HOTPLUG +extern int iosapic_remove (unsigned int gsi_base); +#else +#define iosapic_remove(gsi_base) (-EINVAL) +#endif /* CONFIG_HOTPLUG */ +extern int gsi_to_irq (unsigned int gsi); +extern int iosapic_register_intr (unsigned int gsi, unsigned long polarity, + unsigned long trigger); +extern void iosapic_unregister_intr (unsigned int irq); +extern void __devinit iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi, + unsigned long polarity, + unsigned long trigger); +extern int __init iosapic_register_platform_intr (u32 int_type, + unsigned int gsi, + int pmi_vector, + u16 eid, u16 id, + unsigned long polarity, + unsigned long trigger); + +#ifdef CONFIG_NUMA +extern void __devinit map_iosapic_to_node (unsigned int, int); +#endif +#else +#define iosapic_system_init(pcat_compat) do { } while (0) +#define iosapic_init(address,gsi_base) (-EINVAL) +#define iosapic_remove(gsi_base) (-ENODEV) +#define iosapic_register_intr(gsi,polarity,trigger) (gsi) +#define iosapic_unregister_intr(irq) do { } while (0) +#define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger) do { } while (0) +#define iosapic_register_platform_intr(type,gsi,pmi,eid,id, \ + polarity,trigger) (gsi) +#endif + +# endif /* !__ASSEMBLY__ */ +#endif /* __ASM_IA64_IOSAPIC_H */ diff --git a/arch/ia64/include/asm/ipcbuf.h b/arch/ia64/include/asm/ipcbuf.h new file mode 100644 index 000000000000..079899ae7d32 --- /dev/null +++ b/arch/ia64/include/asm/ipcbuf.h @@ -0,0 +1,28 @@ +#ifndef _ASM_IA64_IPCBUF_H +#define _ASM_IA64_IPCBUF_H + +/* + * The ipc64_perm structure for IA-64 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit seq + * - 2 miscellaneous 64-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid_t uid; + __kernel_gid_t gid; + __kernel_uid_t cuid; + __kernel_gid_t cgid; + __kernel_mode_t mode; + unsigned short seq; + unsigned short __pad1; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ASM_IA64_IPCBUF_H */ diff --git a/arch/ia64/include/asm/irq.h b/arch/ia64/include/asm/irq.h new file mode 100644 index 000000000000..3627116fb0e2 --- /dev/null +++ b/arch/ia64/include/asm/irq.h @@ -0,0 +1,34 @@ +#ifndef _ASM_IA64_IRQ_H +#define _ASM_IA64_IRQ_H + +/* + * Copyright (C) 1999-2000, 2002 Hewlett-Packard Co + * David Mosberger-Tang + * Stephane Eranian + * + * 11/24/98 S.Eranian updated TIMER_IRQ and irq_canonicalize + * 01/20/99 S.Eranian added keyboard interrupt + * 02/29/00 D.Mosberger moved most things into hw_irq.h + */ + +#include +#include +#include + +static __inline__ int +irq_canonicalize (int irq) +{ + /* + * We do the legacy thing here of pretending that irqs < 16 + * are 8259 irqs. This really shouldn't be necessary at all, + * but we keep it here as serial.c still uses it... + */ + return ((irq == 2) ? 9 : irq); +} + +extern void set_irq_affinity_info (unsigned int irq, int dest, int redir); +bool is_affinity_mask_valid(cpumask_t cpumask); + +#define is_affinity_mask_valid is_affinity_mask_valid + +#endif /* _ASM_IA64_IRQ_H */ diff --git a/arch/ia64/include/asm/irq_regs.h b/arch/ia64/include/asm/irq_regs.h new file mode 100644 index 000000000000..3dd9c0b70270 --- /dev/null +++ b/arch/ia64/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include diff --git a/arch/ia64/include/asm/kdebug.h b/arch/ia64/include/asm/kdebug.h new file mode 100644 index 000000000000..d11a69855036 --- /dev/null +++ b/arch/ia64/include/asm/kdebug.h @@ -0,0 +1,57 @@ +#ifndef _IA64_KDEBUG_H +#define _IA64_KDEBUG_H 1 +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) Intel Corporation, 2005 + * + * 2005-Apr Rusty Lynch and Anil S Keshavamurthy + * adopted from + * include/asm-x86_64/kdebug.h + * + * 2005-Oct Keith Owens . Expand notify_die to cover more + * events. + */ + +enum die_val { + DIE_BREAK = 1, + DIE_FAULT, + DIE_OOPS, + DIE_MACHINE_HALT, + DIE_MACHINE_RESTART, + DIE_MCA_MONARCH_ENTER, + DIE_MCA_MONARCH_PROCESS, + DIE_MCA_MONARCH_LEAVE, + DIE_MCA_SLAVE_ENTER, + DIE_MCA_SLAVE_PROCESS, + DIE_MCA_SLAVE_LEAVE, + DIE_MCA_RENDZVOUS_ENTER, + DIE_MCA_RENDZVOUS_PROCESS, + DIE_MCA_RENDZVOUS_LEAVE, + DIE_MCA_NEW_TIMEOUT, + DIE_INIT_ENTER, + DIE_INIT_MONARCH_ENTER, + DIE_INIT_MONARCH_PROCESS, + DIE_INIT_MONARCH_LEAVE, + DIE_INIT_SLAVE_ENTER, + DIE_INIT_SLAVE_PROCESS, + DIE_INIT_SLAVE_LEAVE, + DIE_KDEBUG_ENTER, + DIE_KDEBUG_LEAVE, + DIE_KDUMP_ENTER, + DIE_KDUMP_LEAVE, +}; + +#endif diff --git a/arch/ia64/include/asm/kexec.h b/arch/ia64/include/asm/kexec.h new file mode 100644 index 000000000000..541be835fc5a --- /dev/null +++ b/arch/ia64/include/asm/kexec.h @@ -0,0 +1,44 @@ +#ifndef _ASM_IA64_KEXEC_H +#define _ASM_IA64_KEXEC_H + + +/* Maximum physical address we can use pages from */ +#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) +/* Maximum address we can reach in physical address mode */ +#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) +/* Maximum address we can use for the control code buffer */ +#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE + +#define KEXEC_CONTROL_CODE_SIZE (8192 + 8192 + 4096) + +/* The native architecture */ +#define KEXEC_ARCH KEXEC_ARCH_IA_64 + +#define kexec_flush_icache_page(page) do { \ + unsigned long page_addr = (unsigned long)page_address(page); \ + flush_icache_range(page_addr, page_addr + PAGE_SIZE); \ + } while(0) + +extern struct kimage *ia64_kimage; +extern const unsigned int relocate_new_kernel_size; +extern void relocate_new_kernel(unsigned long, unsigned long, + struct ia64_boot_param *, unsigned long); +static inline void +crash_setup_regs(struct pt_regs *newregs, struct pt_regs *oldregs) +{ +} +extern struct resource efi_memmap_res; +extern struct resource boot_param_res; +extern void kdump_smp_send_stop(void); +extern void kdump_smp_send_init(void); +extern void kexec_disable_iosapic(void); +extern void crash_save_this_cpu(void); +struct rsvd_region; +extern unsigned long kdump_find_rsvd_region(unsigned long size, + struct rsvd_region *rsvd_regions, int n); +extern void kdump_cpu_freeze(struct unw_frame_info *info, void *arg); +extern int kdump_status[]; +extern atomic_t kdump_cpu_freezed; +extern atomic_t kdump_in_progress; + +#endif /* _ASM_IA64_KEXEC_H */ diff --git a/arch/ia64/include/asm/kmap_types.h b/arch/ia64/include/asm/kmap_types.h new file mode 100644 index 000000000000..5d1658aa2b3b --- /dev/null +++ b/arch/ia64/include/asm/kmap_types.h @@ -0,0 +1,30 @@ +#ifndef _ASM_IA64_KMAP_TYPES_H +#define _ASM_IA64_KMAP_TYPES_H + + +#ifdef CONFIG_DEBUG_HIGHMEM +# define D(n) __KM_FENCE_##n , +#else +# define D(n) +#endif + +enum km_type { +D(0) KM_BOUNCE_READ, +D(1) KM_SKB_SUNRPC_DATA, +D(2) KM_SKB_DATA_SOFTIRQ, +D(3) KM_USER0, +D(4) KM_USER1, +D(5) KM_BIO_SRC_IRQ, +D(6) KM_BIO_DST_IRQ, +D(7) KM_PTE0, +D(8) KM_PTE1, +D(9) KM_IRQ0, +D(10) KM_IRQ1, +D(11) KM_SOFTIRQ0, +D(12) KM_SOFTIRQ1, +D(13) KM_TYPE_NR +}; + +#undef D + +#endif /* _ASM_IA64_KMAP_TYPES_H */ diff --git a/arch/ia64/include/asm/kprobes.h b/arch/ia64/include/asm/kprobes.h new file mode 100644 index 000000000000..dbf83fb28db3 --- /dev/null +++ b/arch/ia64/include/asm/kprobes.h @@ -0,0 +1,132 @@ +#ifndef _ASM_KPROBES_H +#define _ASM_KPROBES_H +/* + * Kernel Probes (KProbes) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2002, 2004 + * Copyright (C) Intel Corporation, 2005 + * + * 2005-Apr Rusty Lynch and Anil S Keshavamurthy + * adapted from i386 + */ +#include +#include +#include +#include + +#define __ARCH_WANT_KPROBES_INSN_SLOT +#define MAX_INSN_SIZE 2 /* last half is for kprobe-booster */ +#define BREAK_INST (long)(__IA64_BREAK_KPROBE << 6) +#define NOP_M_INST (long)(1<<27) +#define BRL_INST(i1, i2) ((long)((0xcL << 37) | /* brl */ \ + (0x1L << 12) | /* many */ \ + (((i1) & 1) << 36) | ((i2) << 13))) /* imm */ + +typedef union cmp_inst { + struct { + unsigned long long qp : 6; + unsigned long long p1 : 6; + unsigned long long c : 1; + unsigned long long r2 : 7; + unsigned long long r3 : 7; + unsigned long long p2 : 6; + unsigned long long ta : 1; + unsigned long long x2 : 2; + unsigned long long tb : 1; + unsigned long long opcode : 4; + unsigned long long reserved : 23; + }f; + unsigned long long l; +} cmp_inst_t; + +struct kprobe; + +typedef struct _bundle { + struct { + unsigned long long template : 5; + unsigned long long slot0 : 41; + unsigned long long slot1_p0 : 64-46; + } quad0; + struct { + unsigned long long slot1_p1 : 41 - (64-46); + unsigned long long slot2 : 41; + } quad1; +} __attribute__((__aligned__(16))) bundle_t; + +struct prev_kprobe { + struct kprobe *kp; + unsigned long status; +}; + +#define MAX_PARAM_RSE_SIZE (0x60+0x60/0x3f) +/* per-cpu kprobe control block */ +#define ARCH_PREV_KPROBE_SZ 2 +struct kprobe_ctlblk { + unsigned long kprobe_status; + struct pt_regs jprobe_saved_regs; + unsigned long jprobes_saved_stacked_regs[MAX_PARAM_RSE_SIZE]; + unsigned long *bsp; + unsigned long cfm; + atomic_t prev_kprobe_index; + struct prev_kprobe prev_kprobe[ARCH_PREV_KPROBE_SZ]; +}; + +#define kretprobe_blacklist_size 0 + +#define SLOT0_OPCODE_SHIFT (37) +#define SLOT1_p1_OPCODE_SHIFT (37 - (64-46)) +#define SLOT2_OPCODE_SHIFT (37) + +#define INDIRECT_CALL_OPCODE (1) +#define IP_RELATIVE_CALL_OPCODE (5) +#define IP_RELATIVE_BRANCH_OPCODE (4) +#define IP_RELATIVE_PREDICT_OPCODE (7) +#define LONG_BRANCH_OPCODE (0xC) +#define LONG_CALL_OPCODE (0xD) +#define flush_insn_slot(p) do { } while (0) + +typedef struct kprobe_opcode { + bundle_t bundle; +} kprobe_opcode_t; + +struct fnptr { + unsigned long ip; + unsigned long gp; +}; + +/* Architecture specific copy of original instruction*/ +struct arch_specific_insn { + /* copy of the instruction to be emulated */ + kprobe_opcode_t *insn; + #define INST_FLAG_FIX_RELATIVE_IP_ADDR 1 + #define INST_FLAG_FIX_BRANCH_REG 2 + #define INST_FLAG_BREAK_INST 4 + #define INST_FLAG_BOOSTABLE 8 + unsigned long inst_flag; + unsigned short target_br_reg; + unsigned short slot; +}; + +extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr); +extern int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); + +extern void invalidate_stacked_regs(void); +extern void flush_register_stack(void); +extern void arch_remove_kprobe(struct kprobe *p); + +#endif /* _ASM_KPROBES_H */ diff --git a/arch/ia64/include/asm/kregs.h b/arch/ia64/include/asm/kregs.h new file mode 100644 index 000000000000..aefcdfee7f23 --- /dev/null +++ b/arch/ia64/include/asm/kregs.h @@ -0,0 +1,165 @@ +#ifndef _ASM_IA64_KREGS_H +#define _ASM_IA64_KREGS_H + +/* + * Copyright (C) 2001-2002 Hewlett-Packard Co + * David Mosberger-Tang + */ +/* + * This file defines the kernel register usage convention used by Linux/ia64. + */ + +/* + * Kernel registers: + */ +#define IA64_KR_IO_BASE 0 /* ar.k0: legacy I/O base address */ +#define IA64_KR_TSSD 1 /* ar.k1: IVE uses this as the TSSD */ +#define IA64_KR_PER_CPU_DATA 3 /* ar.k3: physical per-CPU base */ +#define IA64_KR_CURRENT_STACK 4 /* ar.k4: what's mapped in IA64_TR_CURRENT_STACK */ +#define IA64_KR_FPU_OWNER 5 /* ar.k5: fpu-owner (UP only, at the moment) */ +#define IA64_KR_CURRENT 6 /* ar.k6: "current" task pointer */ +#define IA64_KR_PT_BASE 7 /* ar.k7: page table base address (physical) */ + +#define _IA64_KR_PASTE(x,y) x##y +#define _IA64_KR_PREFIX(n) _IA64_KR_PASTE(ar.k, n) +#define IA64_KR(n) _IA64_KR_PREFIX(IA64_KR_##n) + +/* + * Translation registers: + */ +#define IA64_TR_KERNEL 0 /* itr0, dtr0: maps kernel image (code & data) */ +#define IA64_TR_PALCODE 1 /* itr1: maps PALcode as required by EFI */ +#define IA64_TR_CURRENT_STACK 1 /* dtr1: maps kernel's memory- & register-stacks */ + +#define IA64_TR_ALLOC_BASE 2 /* itr&dtr: Base of dynamic TR resource*/ +#define IA64_TR_ALLOC_MAX 32 /* Max number for dynamic use*/ + +/* Processor status register bits: */ +#define IA64_PSR_BE_BIT 1 +#define IA64_PSR_UP_BIT 2 +#define IA64_PSR_AC_BIT 3 +#define IA64_PSR_MFL_BIT 4 +#define IA64_PSR_MFH_BIT 5 +#define IA64_PSR_IC_BIT 13 +#define IA64_PSR_I_BIT 14 +#define IA64_PSR_PK_BIT 15 +#define IA64_PSR_DT_BIT 17 +#define IA64_PSR_DFL_BIT 18 +#define IA64_PSR_DFH_BIT 19 +#define IA64_PSR_SP_BIT 20 +#define IA64_PSR_PP_BIT 21 +#define IA64_PSR_DI_BIT 22 +#define IA64_PSR_SI_BIT 23 +#define IA64_PSR_DB_BIT 24 +#define IA64_PSR_LP_BIT 25 +#define IA64_PSR_TB_BIT 26 +#define IA64_PSR_RT_BIT 27 +/* The following are not affected by save_flags()/restore_flags(): */ +#define IA64_PSR_CPL0_BIT 32 +#define IA64_PSR_CPL1_BIT 33 +#define IA64_PSR_IS_BIT 34 +#define IA64_PSR_MC_BIT 35 +#define IA64_PSR_IT_BIT 36 +#define IA64_PSR_ID_BIT 37 +#define IA64_PSR_DA_BIT 38 +#define IA64_PSR_DD_BIT 39 +#define IA64_PSR_SS_BIT 40 +#define IA64_PSR_RI_BIT 41 +#define IA64_PSR_ED_BIT 43 +#define IA64_PSR_BN_BIT 44 +#define IA64_PSR_IA_BIT 45 + +/* A mask of PSR bits that we generally don't want to inherit across a clone2() or an + execve(). Only list flags here that need to be cleared/set for BOTH clone2() and + execve(). */ +#define IA64_PSR_BITS_TO_CLEAR (IA64_PSR_MFL | IA64_PSR_MFH | IA64_PSR_DB | IA64_PSR_LP | \ + IA64_PSR_TB | IA64_PSR_ID | IA64_PSR_DA | IA64_PSR_DD | \ + IA64_PSR_SS | IA64_PSR_ED | IA64_PSR_IA) +#define IA64_PSR_BITS_TO_SET (IA64_PSR_DFH | IA64_PSR_SP) + +#define IA64_PSR_BE (__IA64_UL(1) << IA64_PSR_BE_BIT) +#define IA64_PSR_UP (__IA64_UL(1) << IA64_PSR_UP_BIT) +#define IA64_PSR_AC (__IA64_UL(1) << IA64_PSR_AC_BIT) +#define IA64_PSR_MFL (__IA64_UL(1) << IA64_PSR_MFL_BIT) +#define IA64_PSR_MFH (__IA64_UL(1) << IA64_PSR_MFH_BIT) +#define IA64_PSR_IC (__IA64_UL(1) << IA64_PSR_IC_BIT) +#define IA64_PSR_I (__IA64_UL(1) << IA64_PSR_I_BIT) +#define IA64_PSR_PK (__IA64_UL(1) << IA64_PSR_PK_BIT) +#define IA64_PSR_DT (__IA64_UL(1) << IA64_PSR_DT_BIT) +#define IA64_PSR_DFL (__IA64_UL(1) << IA64_PSR_DFL_BIT) +#define IA64_PSR_DFH (__IA64_UL(1) << IA64_PSR_DFH_BIT) +#define IA64_PSR_SP (__IA64_UL(1) << IA64_PSR_SP_BIT) +#define IA64_PSR_PP (__IA64_UL(1) << IA64_PSR_PP_BIT) +#define IA64_PSR_DI (__IA64_UL(1) << IA64_PSR_DI_BIT) +#define IA64_PSR_SI (__IA64_UL(1) << IA64_PSR_SI_BIT) +#define IA64_PSR_DB (__IA64_UL(1) << IA64_PSR_DB_BIT) +#define IA64_PSR_LP (__IA64_UL(1) << IA64_PSR_LP_BIT) +#define IA64_PSR_TB (__IA64_UL(1) << IA64_PSR_TB_BIT) +#define IA64_PSR_RT (__IA64_UL(1) << IA64_PSR_RT_BIT) +/* The following are not affected by save_flags()/restore_flags(): */ +#define IA64_PSR_CPL (__IA64_UL(3) << IA64_PSR_CPL0_BIT) +#define IA64_PSR_IS (__IA64_UL(1) << IA64_PSR_IS_BIT) +#define IA64_PSR_MC (__IA64_UL(1) << IA64_PSR_MC_BIT) +#define IA64_PSR_IT (__IA64_UL(1) << IA64_PSR_IT_BIT) +#define IA64_PSR_ID (__IA64_UL(1) << IA64_PSR_ID_BIT) +#define IA64_PSR_DA (__IA64_UL(1) << IA64_PSR_DA_BIT) +#define IA64_PSR_DD (__IA64_UL(1) << IA64_PSR_DD_BIT) +#define IA64_PSR_SS (__IA64_UL(1) << IA64_PSR_SS_BIT) +#define IA64_PSR_RI (__IA64_UL(3) << IA64_PSR_RI_BIT) +#define IA64_PSR_ED (__IA64_UL(1) << IA64_PSR_ED_BIT) +#define IA64_PSR_BN (__IA64_UL(1) << IA64_PSR_BN_BIT) +#define IA64_PSR_IA (__IA64_UL(1) << IA64_PSR_IA_BIT) + +/* User mask bits: */ +#define IA64_PSR_UM (IA64_PSR_BE | IA64_PSR_UP | IA64_PSR_AC | IA64_PSR_MFL | IA64_PSR_MFH) + +/* Default Control Register */ +#define IA64_DCR_PP_BIT 0 /* privileged performance monitor default */ +#define IA64_DCR_BE_BIT 1 /* big-endian default */ +#define IA64_DCR_LC_BIT 2 /* ia32 lock-check enable */ +#define IA64_DCR_DM_BIT 8 /* defer TLB miss faults */ +#define IA64_DCR_DP_BIT 9 /* defer page-not-present faults */ +#define IA64_DCR_DK_BIT 10 /* defer key miss faults */ +#define IA64_DCR_DX_BIT 11 /* defer key permission faults */ +#define IA64_DCR_DR_BIT 12 /* defer access right faults */ +#define IA64_DCR_DA_BIT 13 /* defer access bit faults */ +#define IA64_DCR_DD_BIT 14 /* defer debug faults */ + +#define IA64_DCR_PP (__IA64_UL(1) << IA64_DCR_PP_BIT) +#define IA64_DCR_BE (__IA64_UL(1) << IA64_DCR_BE_BIT) +#define IA64_DCR_LC (__IA64_UL(1) << IA64_DCR_LC_BIT) +#define IA64_DCR_DM (__IA64_UL(1) << IA64_DCR_DM_BIT) +#define IA64_DCR_DP (__IA64_UL(1) << IA64_DCR_DP_BIT) +#define IA64_DCR_DK (__IA64_UL(1) << IA64_DCR_DK_BIT) +#define IA64_DCR_DX (__IA64_UL(1) << IA64_DCR_DX_BIT) +#define IA64_DCR_DR (__IA64_UL(1) << IA64_DCR_DR_BIT) +#define IA64_DCR_DA (__IA64_UL(1) << IA64_DCR_DA_BIT) +#define IA64_DCR_DD (__IA64_UL(1) << IA64_DCR_DD_BIT) + +/* Interrupt Status Register */ +#define IA64_ISR_X_BIT 32 /* execute access */ +#define IA64_ISR_W_BIT 33 /* write access */ +#define IA64_ISR_R_BIT 34 /* read access */ +#define IA64_ISR_NA_BIT 35 /* non-access */ +#define IA64_ISR_SP_BIT 36 /* speculative load exception */ +#define IA64_ISR_RS_BIT 37 /* mandatory register-stack exception */ +#define IA64_ISR_IR_BIT 38 /* invalid register frame exception */ +#define IA64_ISR_CODE_MASK 0xf + +#define IA64_ISR_X (__IA64_UL(1) << IA64_ISR_X_BIT) +#define IA64_ISR_W (__IA64_UL(1) << IA64_ISR_W_BIT) +#define IA64_ISR_R (__IA64_UL(1) << IA64_ISR_R_BIT) +#define IA64_ISR_NA (__IA64_UL(1) << IA64_ISR_NA_BIT) +#define IA64_ISR_SP (__IA64_UL(1) << IA64_ISR_SP_BIT) +#define IA64_ISR_RS (__IA64_UL(1) << IA64_ISR_RS_BIT) +#define IA64_ISR_IR (__IA64_UL(1) << IA64_ISR_IR_BIT) + +/* ISR code field for non-access instructions */ +#define IA64_ISR_CODE_TPA 0 +#define IA64_ISR_CODE_FC 1 +#define IA64_ISR_CODE_PROBE 2 +#define IA64_ISR_CODE_TAK 3 +#define IA64_ISR_CODE_LFETCH 4 +#define IA64_ISR_CODE_PROBEF 5 + +#endif /* _ASM_IA64_kREGS_H */ diff --git a/arch/ia64/include/asm/kvm.h b/arch/ia64/include/asm/kvm.h new file mode 100644 index 000000000000..f38472ac2267 --- /dev/null +++ b/arch/ia64/include/asm/kvm.h @@ -0,0 +1,211 @@ +#ifndef __ASM_IA64_KVM_H +#define __ASM_IA64_KVM_H + +/* + * kvm structure definitions for ia64 + * + * Copyright (C) 2007 Xiantao Zhang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + */ + +#include + +#include + +/* Architectural interrupt line count. */ +#define KVM_NR_INTERRUPTS 256 + +#define KVM_IOAPIC_NUM_PINS 48 + +struct kvm_ioapic_state { + __u64 base_address; + __u32 ioregsel; + __u32 id; + __u32 irr; + __u32 pad; + union { + __u64 bits; + struct { + __u8 vector; + __u8 delivery_mode:3; + __u8 dest_mode:1; + __u8 delivery_status:1; + __u8 polarity:1; + __u8 remote_irr:1; + __u8 trig_mode:1; + __u8 mask:1; + __u8 reserve:7; + __u8 reserved[4]; + __u8 dest_id; + } fields; + } redirtbl[KVM_IOAPIC_NUM_PINS]; +}; + +#define KVM_IRQCHIP_PIC_MASTER 0 +#define KVM_IRQCHIP_PIC_SLAVE 1 +#define KVM_IRQCHIP_IOAPIC 2 + +#define KVM_CONTEXT_SIZE 8*1024 + +struct kvm_fpreg { + union { + unsigned long bits[2]; + long double __dummy; /* force 16-byte alignment */ + } u; +}; + +union context { + /* 8K size */ + char dummy[KVM_CONTEXT_SIZE]; + struct { + unsigned long psr; + unsigned long pr; + unsigned long caller_unat; + unsigned long pad; + unsigned long gr[32]; + unsigned long ar[128]; + unsigned long br[8]; + unsigned long cr[128]; + unsigned long rr[8]; + unsigned long ibr[8]; + unsigned long dbr[8]; + unsigned long pkr[8]; + struct kvm_fpreg fr[128]; + }; +}; + +struct thash_data { + union { + struct { + unsigned long p : 1; /* 0 */ + unsigned long rv1 : 1; /* 1 */ + unsigned long ma : 3; /* 2-4 */ + unsigned long a : 1; /* 5 */ + unsigned long d : 1; /* 6 */ + unsigned long pl : 2; /* 7-8 */ + unsigned long ar : 3; /* 9-11 */ + unsigned long ppn : 38; /* 12-49 */ + unsigned long rv2 : 2; /* 50-51 */ + unsigned long ed : 1; /* 52 */ + unsigned long ig1 : 11; /* 53-63 */ + }; + struct { + unsigned long __rv1 : 53; /* 0-52 */ + unsigned long contiguous : 1; /*53 */ + unsigned long tc : 1; /* 54 TR or TC */ + unsigned long cl : 1; + /* 55 I side or D side cache line */ + unsigned long len : 4; /* 56-59 */ + unsigned long io : 1; /* 60 entry is for io or not */ + unsigned long nomap : 1; + /* 61 entry cann't be inserted into machine TLB.*/ + unsigned long checked : 1; + /* 62 for VTLB/VHPT sanity check */ + unsigned long invalid : 1; + /* 63 invalid entry */ + }; + unsigned long page_flags; + }; /* same for VHPT and TLB */ + + union { + struct { + unsigned long rv3 : 2; + unsigned long ps : 6; + unsigned long key : 24; + unsigned long rv4 : 32; + }; + unsigned long itir; + }; + union { + struct { + unsigned long ig2 : 12; + unsigned long vpn : 49; + unsigned long vrn : 3; + }; + unsigned long ifa; + unsigned long vadr; + struct { + unsigned long tag : 63; + unsigned long ti : 1; + }; + unsigned long etag; + }; + union { + struct thash_data *next; + unsigned long rid; + unsigned long gpaddr; + }; +}; + +#define NITRS 8 +#define NDTRS 8 + +struct saved_vpd { + unsigned long vhpi; + unsigned long vgr[16]; + unsigned long vbgr[16]; + unsigned long vnat; + unsigned long vbnat; + unsigned long vcpuid[5]; + unsigned long vpsr; + unsigned long vpr; + unsigned long vcr[128]; +}; + +struct kvm_regs { + char *saved_guest; + char *saved_stack; + struct saved_vpd vpd; + /*Arch-regs*/ + int mp_state; + unsigned long vmm_rr; + /* TR and TC. */ + struct thash_data itrs[NITRS]; + struct thash_data dtrs[NDTRS]; + /* Bit is set if there is a tr/tc for the region. */ + unsigned char itr_regions; + unsigned char dtr_regions; + unsigned char tc_regions; + + char irq_check; + unsigned long saved_itc; + unsigned long itc_check; + unsigned long timer_check; + unsigned long timer_pending; + unsigned long last_itc; + + unsigned long vrr[8]; + unsigned long ibr[8]; + unsigned long dbr[8]; + unsigned long insvc[4]; /* Interrupt in service. */ + unsigned long xtp; + + unsigned long metaphysical_rr0; /* from kvm_arch (so is pinned) */ + unsigned long metaphysical_rr4; /* from kvm_arch (so is pinned) */ + unsigned long metaphysical_saved_rr0; /* from kvm_arch */ + unsigned long metaphysical_saved_rr4; /* from kvm_arch */ + unsigned long fp_psr; /*used for lazy float register */ + unsigned long saved_gp; + /*for phycial emulation */ +}; + +struct kvm_sregs { +}; + +struct kvm_fpu { +}; + +#endif diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h new file mode 100644 index 000000000000..1efe513a9941 --- /dev/null +++ b/arch/ia64/include/asm/kvm_host.h @@ -0,0 +1,527 @@ +/* + * kvm_host.h: used for kvm module, and hold ia64-specific sections. + * + * Copyright (C) 2007, Intel Corporation. + * + * Xiantao Zhang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + */ + +#ifndef __ASM_KVM_HOST_H +#define __ASM_KVM_HOST_H + + +#include +#include +#include +#include +#include + +#include +#include + +#define KVM_MAX_VCPUS 4 +#define KVM_MEMORY_SLOTS 32 +/* memory slots that does not exposed to userspace */ +#define KVM_PRIVATE_MEM_SLOTS 4 + +#define KVM_COALESCED_MMIO_PAGE_OFFSET 1 + +/* define exit reasons from vmm to kvm*/ +#define EXIT_REASON_VM_PANIC 0 +#define EXIT_REASON_MMIO_INSTRUCTION 1 +#define EXIT_REASON_PAL_CALL 2 +#define EXIT_REASON_SAL_CALL 3 +#define EXIT_REASON_SWITCH_RR6 4 +#define EXIT_REASON_VM_DESTROY 5 +#define EXIT_REASON_EXTERNAL_INTERRUPT 6 +#define EXIT_REASON_IPI 7 +#define EXIT_REASON_PTC_G 8 + +/*Define vmm address space and vm data space.*/ +#define KVM_VMM_SIZE (16UL<<20) +#define KVM_VMM_SHIFT 24 +#define KVM_VMM_BASE 0xD000000000000000UL +#define VMM_SIZE (8UL<<20) + +/* + * Define vm_buffer, used by PAL Services, base address. + * Note: vmbuffer is in the VMM-BLOCK, the size must be < 8M + */ +#define KVM_VM_BUFFER_BASE (KVM_VMM_BASE + VMM_SIZE) +#define KVM_VM_BUFFER_SIZE (8UL<<20) + +/*Define Virtual machine data layout.*/ +#define KVM_VM_DATA_SHIFT 24 +#define KVM_VM_DATA_SIZE (1UL << KVM_VM_DATA_SHIFT) +#define KVM_VM_DATA_BASE (KVM_VMM_BASE + KVM_VMM_SIZE) + + +#define KVM_P2M_BASE KVM_VM_DATA_BASE +#define KVM_P2M_OFS 0 +#define KVM_P2M_SIZE (8UL << 20) + +#define KVM_VHPT_BASE (KVM_P2M_BASE + KVM_P2M_SIZE) +#define KVM_VHPT_OFS KVM_P2M_SIZE +#define KVM_VHPT_BLOCK_SIZE (2UL << 20) +#define VHPT_SHIFT 18 +#define VHPT_SIZE (1UL << VHPT_SHIFT) +#define VHPT_NUM_ENTRIES (1<<(VHPT_SHIFT-5)) + +#define KVM_VTLB_BASE (KVM_VHPT_BASE+KVM_VHPT_BLOCK_SIZE) +#define KVM_VTLB_OFS (KVM_VHPT_OFS+KVM_VHPT_BLOCK_SIZE) +#define KVM_VTLB_BLOCK_SIZE (1UL<<20) +#define VTLB_SHIFT 17 +#define VTLB_SIZE (1UL<vcpu_id) << 24) + +/* + *Delivery mode + */ +#define SAPIC_DELIV_SHIFT 8 +#define SAPIC_FIXED 0x0 +#define SAPIC_LOWEST_PRIORITY 0x1 +#define SAPIC_PMI 0x2 +#define SAPIC_NMI 0x4 +#define SAPIC_INIT 0x5 +#define SAPIC_EXTINT 0x7 + +/* + * vcpu->requests bit members for arch + */ +#define KVM_REQ_PTC_G 32 +#define KVM_REQ_RESUME 33 + +#define KVM_PAGES_PER_HPAGE 1 + +struct kvm; +struct kvm_vcpu; +struct kvm_guest_debug{ +}; + +struct kvm_mmio_req { + uint64_t addr; /* physical address */ + uint64_t size; /* size in bytes */ + uint64_t data; /* data (or paddr of data) */ + uint8_t state:4; + uint8_t dir:1; /* 1=read, 0=write */ +}; + +/*Pal data struct */ +struct kvm_pal_call{ + /*In area*/ + uint64_t gr28; + uint64_t gr29; + uint64_t gr30; + uint64_t gr31; + /*Out area*/ + struct ia64_pal_retval ret; +}; + +/* Sal data structure */ +struct kvm_sal_call{ + /*In area*/ + uint64_t in0; + uint64_t in1; + uint64_t in2; + uint64_t in3; + uint64_t in4; + uint64_t in5; + uint64_t in6; + uint64_t in7; + struct sal_ret_values ret; +}; + +/*Guest change rr6*/ +struct kvm_switch_rr6 { + uint64_t old_rr; + uint64_t new_rr; +}; + +union ia64_ipi_a{ + unsigned long val; + struct { + unsigned long rv : 3; + unsigned long ir : 1; + unsigned long eid : 8; + unsigned long id : 8; + unsigned long ib_base : 44; + }; +}; + +union ia64_ipi_d { + unsigned long val; + struct { + unsigned long vector : 8; + unsigned long dm : 3; + unsigned long ig : 53; + }; +}; + +/*ipi check exit data*/ +struct kvm_ipi_data{ + union ia64_ipi_a addr; + union ia64_ipi_d data; +}; + +/*global purge data*/ +struct kvm_ptc_g { + unsigned long vaddr; + unsigned long rr; + unsigned long ps; + struct kvm_vcpu *vcpu; +}; + +/*Exit control data */ +struct exit_ctl_data{ + uint32_t exit_reason; + uint32_t vm_status; + union { + struct kvm_mmio_req ioreq; + struct kvm_pal_call pal_data; + struct kvm_sal_call sal_data; + struct kvm_switch_rr6 rr_data; + struct kvm_ipi_data ipi_data; + struct kvm_ptc_g ptc_g_data; + } u; +}; + +union pte_flags { + unsigned long val; + struct { + unsigned long p : 1; /*0 */ + unsigned long : 1; /* 1 */ + unsigned long ma : 3; /* 2-4 */ + unsigned long a : 1; /* 5 */ + unsigned long d : 1; /* 6 */ + unsigned long pl : 2; /* 7-8 */ + unsigned long ar : 3; /* 9-11 */ + unsigned long ppn : 38; /* 12-49 */ + unsigned long : 2; /* 50-51 */ + unsigned long ed : 1; /* 52 */ + }; +}; + +union ia64_pta { + unsigned long val; + struct { + unsigned long ve : 1; + unsigned long reserved0 : 1; + unsigned long size : 6; + unsigned long vf : 1; + unsigned long reserved1 : 6; + unsigned long base : 49; + }; +}; + +struct thash_cb { + /* THASH base information */ + struct thash_data *hash; /* hash table pointer */ + union ia64_pta pta; + int num; +}; + +struct kvm_vcpu_stat { +}; + +struct kvm_vcpu_arch { + int launched; + int last_exit; + int last_run_cpu; + int vmm_tr_slot; + int vm_tr_slot; + +#define KVM_MP_STATE_RUNNABLE 0 +#define KVM_MP_STATE_UNINITIALIZED 1 +#define KVM_MP_STATE_INIT_RECEIVED 2 +#define KVM_MP_STATE_HALTED 3 + int mp_state; + +#define MAX_PTC_G_NUM 3 + int ptc_g_count; + struct kvm_ptc_g ptc_g_data[MAX_PTC_G_NUM]; + + /*halt timer to wake up sleepy vcpus*/ + struct hrtimer hlt_timer; + long ht_active; + + struct kvm_lapic *apic; /* kernel irqchip context */ + struct vpd *vpd; + + /* Exit data for vmm_transition*/ + struct exit_ctl_data exit_data; + + cpumask_t cache_coherent_map; + + unsigned long vmm_rr; + unsigned long host_rr6; + unsigned long psbits[8]; + unsigned long cr_iipa; + unsigned long cr_isr; + unsigned long vsa_base; + unsigned long dirty_log_lock_pa; + unsigned long __gp; + /* TR and TC. */ + struct thash_data itrs[NITRS]; + struct thash_data dtrs[NDTRS]; + /* Bit is set if there is a tr/tc for the region. */ + unsigned char itr_regions; + unsigned char dtr_regions; + unsigned char tc_regions; + /* purge all */ + unsigned long ptce_base; + unsigned long ptce_count[2]; + unsigned long ptce_stride[2]; + /* itc/itm */ + unsigned long last_itc; + long itc_offset; + unsigned long itc_check; + unsigned long timer_check; + unsigned long timer_pending; + + unsigned long vrr[8]; + unsigned long ibr[8]; + unsigned long dbr[8]; + unsigned long insvc[4]; /* Interrupt in service. */ + unsigned long xtp; + + unsigned long metaphysical_rr0; /* from kvm_arch (so is pinned) */ + unsigned long metaphysical_rr4; /* from kvm_arch (so is pinned) */ + unsigned long metaphysical_saved_rr0; /* from kvm_arch */ + unsigned long metaphysical_saved_rr4; /* from kvm_arch */ + unsigned long fp_psr; /*used for lazy float register */ + unsigned long saved_gp; + /*for phycial emulation */ + int mode_flags; + struct thash_cb vtlb; + struct thash_cb vhpt; + char irq_check; + char irq_new_pending; + + unsigned long opcode; + unsigned long cause; + union context host; + union context guest; +}; + +struct kvm_vm_stat { + u64 remote_tlb_flush; +}; + +struct kvm_sal_data { + unsigned long boot_ip; + unsigned long boot_gp; +}; + +struct kvm_arch { + unsigned long vm_base; + unsigned long metaphysical_rr0; + unsigned long metaphysical_rr4; + unsigned long vmm_init_rr; + unsigned long vhpt_base; + unsigned long vtlb_base; + unsigned long vpd_base; + spinlock_t dirty_log_lock; + struct kvm_ioapic *vioapic; + struct kvm_vm_stat stat; + struct kvm_sal_data rdv_sal_data; +}; + +union cpuid3_t { + u64 value; + struct { + u64 number : 8; + u64 revision : 8; + u64 model : 8; + u64 family : 8; + u64 archrev : 8; + u64 rv : 24; + }; +}; + +struct kvm_pt_regs { + /* The following registers are saved by SAVE_MIN: */ + unsigned long b6; /* scratch */ + unsigned long b7; /* scratch */ + + unsigned long ar_csd; /* used by cmp8xchg16 (scratch) */ + unsigned long ar_ssd; /* reserved for future use (scratch) */ + + unsigned long r8; /* scratch (return value register 0) */ + unsigned long r9; /* scratch (return value register 1) */ + unsigned long r10; /* scratch (return value register 2) */ + unsigned long r11; /* scratch (return value register 3) */ + + unsigned long cr_ipsr; /* interrupted task's psr */ + unsigned long cr_iip; /* interrupted task's instruction pointer */ + unsigned long cr_ifs; /* interrupted task's function state */ + + unsigned long ar_unat; /* interrupted task's NaT register (preserved) */ + unsigned long ar_pfs; /* prev function state */ + unsigned long ar_rsc; /* RSE configuration */ + /* The following two are valid only if cr_ipsr.cpl > 0: */ + unsigned long ar_rnat; /* RSE NaT */ + unsigned long ar_bspstore; /* RSE bspstore */ + + unsigned long pr; /* 64 predicate registers (1 bit each) */ + unsigned long b0; /* return pointer (bp) */ + unsigned long loadrs; /* size of dirty partition << 16 */ + + unsigned long r1; /* the gp pointer */ + unsigned long r12; /* interrupted task's memory stack pointer */ + unsigned long r13; /* thread pointer */ + + unsigned long ar_fpsr; /* floating point status (preserved) */ + unsigned long r15; /* scratch */ + + /* The remaining registers are NOT saved for system calls. */ + unsigned long r14; /* scratch */ + unsigned long r2; /* scratch */ + unsigned long r3; /* scratch */ + unsigned long r16; /* scratch */ + unsigned long r17; /* scratch */ + unsigned long r18; /* scratch */ + unsigned long r19; /* scratch */ + unsigned long r20; /* scratch */ + unsigned long r21; /* scratch */ + unsigned long r22; /* scratch */ + unsigned long r23; /* scratch */ + unsigned long r24; /* scratch */ + unsigned long r25; /* scratch */ + unsigned long r26; /* scratch */ + unsigned long r27; /* scratch */ + unsigned long r28; /* scratch */ + unsigned long r29; /* scratch */ + unsigned long r30; /* scratch */ + unsigned long r31; /* scratch */ + unsigned long ar_ccv; /* compare/exchange value (scratch) */ + + /* + * Floating point registers that the kernel considers scratch: + */ + struct ia64_fpreg f6; /* scratch */ + struct ia64_fpreg f7; /* scratch */ + struct ia64_fpreg f8; /* scratch */ + struct ia64_fpreg f9; /* scratch */ + struct ia64_fpreg f10; /* scratch */ + struct ia64_fpreg f11; /* scratch */ + + unsigned long r4; /* preserved */ + unsigned long r5; /* preserved */ + unsigned long r6; /* preserved */ + unsigned long r7; /* preserved */ + unsigned long eml_unat; /* used for emulating instruction */ + unsigned long pad0; /* alignment pad */ +}; + +static inline struct kvm_pt_regs *vcpu_regs(struct kvm_vcpu *v) +{ + return (struct kvm_pt_regs *) ((unsigned long) v + IA64_STK_OFFSET) - 1; +} + +typedef int kvm_vmm_entry(void); +typedef void kvm_tramp_entry(union context *host, union context *guest); + +struct kvm_vmm_info{ + struct module *module; + kvm_vmm_entry *vmm_entry; + kvm_tramp_entry *tramp_entry; + unsigned long vmm_ivt; +}; + +int kvm_highest_pending_irq(struct kvm_vcpu *vcpu); +int kvm_emulate_halt(struct kvm_vcpu *vcpu); +int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run); +void kvm_sal_emul(struct kvm_vcpu *vcpu); + +static inline void kvm_inject_nmi(struct kvm_vcpu *vcpu) {} + +#endif diff --git a/arch/ia64/include/asm/kvm_para.h b/arch/ia64/include/asm/kvm_para.h new file mode 100644 index 000000000000..0d6d8ca07b8c --- /dev/null +++ b/arch/ia64/include/asm/kvm_para.h @@ -0,0 +1,27 @@ +#ifndef __IA64_KVM_PARA_H +#define __IA64_KVM_PARA_H + +/* + * Copyright (C) 2007 Xiantao Zhang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + */ + +static inline unsigned int kvm_arch_para_features(void) +{ + return 0; +} + +#endif diff --git a/arch/ia64/include/asm/libata-portmap.h b/arch/ia64/include/asm/libata-portmap.h new file mode 100644 index 000000000000..0e00c9a9f410 --- /dev/null +++ b/arch/ia64/include/asm/libata-portmap.h @@ -0,0 +1,12 @@ +#ifndef __ASM_IA64_LIBATA_PORTMAP_H +#define __ASM_IA64_LIBATA_PORTMAP_H + +#define ATA_PRIMARY_CMD 0x1F0 +#define ATA_PRIMARY_CTL 0x3F6 +#define ATA_PRIMARY_IRQ(dev) isa_irq_to_vector(14) + +#define ATA_SECONDARY_CMD 0x170 +#define ATA_SECONDARY_CTL 0x376 +#define ATA_SECONDARY_IRQ(dev) isa_irq_to_vector(15) + +#endif diff --git a/arch/ia64/include/asm/linkage.h b/arch/ia64/include/asm/linkage.h new file mode 100644 index 000000000000..ef22a45c1890 --- /dev/null +++ b/arch/ia64/include/asm/linkage.h @@ -0,0 +1,14 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#ifndef __ASSEMBLY__ + +#define asmlinkage CPP_ASMLINKAGE __attribute__((syscall_linkage)) + +#else + +#include + +#endif + +#endif diff --git a/arch/ia64/include/asm/local.h b/arch/ia64/include/asm/local.h new file mode 100644 index 000000000000..c11c530f74d0 --- /dev/null +++ b/arch/ia64/include/asm/local.h @@ -0,0 +1 @@ +#include diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h new file mode 100644 index 000000000000..2b850ccafef5 --- /dev/null +++ b/arch/ia64/include/asm/machvec.h @@ -0,0 +1,460 @@ +/* + * Machine vector for IA-64. + * + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) Srinivasa Thirumalachar + * Copyright (C) Vijay Chander + * Copyright (C) 1999-2001, 2003-2004 Hewlett-Packard Co. + * David Mosberger-Tang + */ +#ifndef _ASM_IA64_MACHVEC_H +#define _ASM_IA64_MACHVEC_H + +#include + +/* forward declarations: */ +struct device; +struct pt_regs; +struct scatterlist; +struct page; +struct mm_struct; +struct pci_bus; +struct task_struct; +struct pci_dev; +struct msi_desc; +struct dma_attrs; + +typedef void ia64_mv_setup_t (char **); +typedef void ia64_mv_cpu_init_t (void); +typedef void ia64_mv_irq_init_t (void); +typedef void ia64_mv_send_ipi_t (int, int, int, int); +typedef void ia64_mv_timer_interrupt_t (int, void *); +typedef void ia64_mv_global_tlb_purge_t (struct mm_struct *, unsigned long, unsigned long, unsigned long); +typedef void ia64_mv_tlb_migrate_finish_t (struct mm_struct *); +typedef u8 ia64_mv_irq_to_vector (int); +typedef unsigned int ia64_mv_local_vector_to_irq (u8); +typedef char *ia64_mv_pci_get_legacy_mem_t (struct pci_bus *); +typedef int ia64_mv_pci_legacy_read_t (struct pci_bus *, u16 port, u32 *val, + u8 size); +typedef int ia64_mv_pci_legacy_write_t (struct pci_bus *, u16 port, u32 val, + u8 size); +typedef void ia64_mv_migrate_t(struct task_struct * task); +typedef void ia64_mv_pci_fixup_bus_t (struct pci_bus *); +typedef void ia64_mv_kernel_launch_event_t(void); + +/* DMA-mapping interface: */ +typedef void ia64_mv_dma_init (void); +typedef void *ia64_mv_dma_alloc_coherent (struct device *, size_t, dma_addr_t *, gfp_t); +typedef void ia64_mv_dma_free_coherent (struct device *, size_t, void *, dma_addr_t); +typedef dma_addr_t ia64_mv_dma_map_single (struct device *, void *, size_t, int); +typedef void ia64_mv_dma_unmap_single (struct device *, dma_addr_t, size_t, int); +typedef int ia64_mv_dma_map_sg (struct device *, struct scatterlist *, int, int); +typedef void ia64_mv_dma_unmap_sg (struct device *, struct scatterlist *, int, int); +typedef void ia64_mv_dma_sync_single_for_cpu (struct device *, dma_addr_t, size_t, int); +typedef void ia64_mv_dma_sync_sg_for_cpu (struct device *, struct scatterlist *, int, int); +typedef void ia64_mv_dma_sync_single_for_device (struct device *, dma_addr_t, size_t, int); +typedef void ia64_mv_dma_sync_sg_for_device (struct device *, struct scatterlist *, int, int); +typedef int ia64_mv_dma_mapping_error(struct device *, dma_addr_t dma_addr); +typedef int ia64_mv_dma_supported (struct device *, u64); + +typedef dma_addr_t ia64_mv_dma_map_single_attrs (struct device *, void *, size_t, int, struct dma_attrs *); +typedef void ia64_mv_dma_unmap_single_attrs (struct device *, dma_addr_t, size_t, int, struct dma_attrs *); +typedef int ia64_mv_dma_map_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *); +typedef void ia64_mv_dma_unmap_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *); + +/* + * WARNING: The legacy I/O space is _architected_. Platforms are + * expected to follow this architected model (see Section 10.7 in the + * IA-64 Architecture Software Developer's Manual). Unfortunately, + * some broken machines do not follow that model, which is why we have + * to make the inX/outX operations part of the machine vector. + * Platform designers should follow the architected model whenever + * possible. + */ +typedef unsigned int ia64_mv_inb_t (unsigned long); +typedef unsigned int ia64_mv_inw_t (unsigned long); +typedef unsigned int ia64_mv_inl_t (unsigned long); +typedef void ia64_mv_outb_t (unsigned char, unsigned long); +typedef void ia64_mv_outw_t (unsigned short, unsigned long); +typedef void ia64_mv_outl_t (unsigned int, unsigned long); +typedef void ia64_mv_mmiowb_t (void); +typedef unsigned char ia64_mv_readb_t (const volatile void __iomem *); +typedef unsigned short ia64_mv_readw_t (const volatile void __iomem *); +typedef unsigned int ia64_mv_readl_t (const volatile void __iomem *); +typedef unsigned long ia64_mv_readq_t (const volatile void __iomem *); +typedef unsigned char ia64_mv_readb_relaxed_t (const volatile void __iomem *); +typedef unsigned short ia64_mv_readw_relaxed_t (const volatile void __iomem *); +typedef unsigned int ia64_mv_readl_relaxed_t (const volatile void __iomem *); +typedef unsigned long ia64_mv_readq_relaxed_t (const volatile void __iomem *); + +typedef int ia64_mv_setup_msi_irq_t (struct pci_dev *pdev, struct msi_desc *); +typedef void ia64_mv_teardown_msi_irq_t (unsigned int irq); + +static inline void +machvec_noop (void) +{ +} + +static inline void +machvec_noop_mm (struct mm_struct *mm) +{ +} + +static inline void +machvec_noop_task (struct task_struct *task) +{ +} + +static inline void +machvec_noop_bus (struct pci_bus *bus) +{ +} + +extern void machvec_setup (char **); +extern void machvec_timer_interrupt (int, void *); +extern void machvec_dma_sync_single (struct device *, dma_addr_t, size_t, int); +extern void machvec_dma_sync_sg (struct device *, struct scatterlist *, int, int); +extern void machvec_tlb_migrate_finish (struct mm_struct *); + +# if defined (CONFIG_IA64_HP_SIM) +# include +# elif defined (CONFIG_IA64_DIG) +# include +# elif defined (CONFIG_IA64_HP_ZX1) +# include +# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB) +# include +# elif defined (CONFIG_IA64_SGI_SN2) +# include +# elif defined (CONFIG_IA64_SGI_UV) +# include +# elif defined (CONFIG_IA64_GENERIC) + +# ifdef MACHVEC_PLATFORM_HEADER +# include MACHVEC_PLATFORM_HEADER +# else +# define platform_name ia64_mv.name +# define platform_setup ia64_mv.setup +# define platform_cpu_init ia64_mv.cpu_init +# define platform_irq_init ia64_mv.irq_init +# define platform_send_ipi ia64_mv.send_ipi +# define platform_timer_interrupt ia64_mv.timer_interrupt +# define platform_global_tlb_purge ia64_mv.global_tlb_purge +# define platform_tlb_migrate_finish ia64_mv.tlb_migrate_finish +# define platform_dma_init ia64_mv.dma_init +# define platform_dma_alloc_coherent ia64_mv.dma_alloc_coherent +# define platform_dma_free_coherent ia64_mv.dma_free_coherent +# define platform_dma_map_single_attrs ia64_mv.dma_map_single_attrs +# define platform_dma_unmap_single_attrs ia64_mv.dma_unmap_single_attrs +# define platform_dma_map_sg_attrs ia64_mv.dma_map_sg_attrs +# define platform_dma_unmap_sg_attrs ia64_mv.dma_unmap_sg_attrs +# define platform_dma_sync_single_for_cpu ia64_mv.dma_sync_single_for_cpu +# define platform_dma_sync_sg_for_cpu ia64_mv.dma_sync_sg_for_cpu +# define platform_dma_sync_single_for_device ia64_mv.dma_sync_single_for_device +# define platform_dma_sync_sg_for_device ia64_mv.dma_sync_sg_for_device +# define platform_dma_mapping_error ia64_mv.dma_mapping_error +# define platform_dma_supported ia64_mv.dma_supported +# define platform_irq_to_vector ia64_mv.irq_to_vector +# define platform_local_vector_to_irq ia64_mv.local_vector_to_irq +# define platform_pci_get_legacy_mem ia64_mv.pci_get_legacy_mem +# define platform_pci_legacy_read ia64_mv.pci_legacy_read +# define platform_pci_legacy_write ia64_mv.pci_legacy_write +# define platform_inb ia64_mv.inb +# define platform_inw ia64_mv.inw +# define platform_inl ia64_mv.inl +# define platform_outb ia64_mv.outb +# define platform_outw ia64_mv.outw +# define platform_outl ia64_mv.outl +# define platform_mmiowb ia64_mv.mmiowb +# define platform_readb ia64_mv.readb +# define platform_readw ia64_mv.readw +# define platform_readl ia64_mv.readl +# define platform_readq ia64_mv.readq +# define platform_readb_relaxed ia64_mv.readb_relaxed +# define platform_readw_relaxed ia64_mv.readw_relaxed +# define platform_readl_relaxed ia64_mv.readl_relaxed +# define platform_readq_relaxed ia64_mv.readq_relaxed +# define platform_migrate ia64_mv.migrate +# define platform_setup_msi_irq ia64_mv.setup_msi_irq +# define platform_teardown_msi_irq ia64_mv.teardown_msi_irq +# define platform_pci_fixup_bus ia64_mv.pci_fixup_bus +# define platform_kernel_launch_event ia64_mv.kernel_launch_event +# endif + +/* __attribute__((__aligned__(16))) is required to make size of the + * structure multiple of 16 bytes. + * This will fillup the holes created because of section 3.3.1 in + * Software Conventions guide. + */ +struct ia64_machine_vector { + const char *name; + ia64_mv_setup_t *setup; + ia64_mv_cpu_init_t *cpu_init; + ia64_mv_irq_init_t *irq_init; + ia64_mv_send_ipi_t *send_ipi; + ia64_mv_timer_interrupt_t *timer_interrupt; + ia64_mv_global_tlb_purge_t *global_tlb_purge; + ia64_mv_tlb_migrate_finish_t *tlb_migrate_finish; + ia64_mv_dma_init *dma_init; + ia64_mv_dma_alloc_coherent *dma_alloc_coherent; + ia64_mv_dma_free_coherent *dma_free_coherent; + ia64_mv_dma_map_single_attrs *dma_map_single_attrs; + ia64_mv_dma_unmap_single_attrs *dma_unmap_single_attrs; + ia64_mv_dma_map_sg_attrs *dma_map_sg_attrs; + ia64_mv_dma_unmap_sg_attrs *dma_unmap_sg_attrs; + ia64_mv_dma_sync_single_for_cpu *dma_sync_single_for_cpu; + ia64_mv_dma_sync_sg_for_cpu *dma_sync_sg_for_cpu; + ia64_mv_dma_sync_single_for_device *dma_sync_single_for_device; + ia64_mv_dma_sync_sg_for_device *dma_sync_sg_for_device; + ia64_mv_dma_mapping_error *dma_mapping_error; + ia64_mv_dma_supported *dma_supported; + ia64_mv_irq_to_vector *irq_to_vector; + ia64_mv_local_vector_to_irq *local_vector_to_irq; + ia64_mv_pci_get_legacy_mem_t *pci_get_legacy_mem; + ia64_mv_pci_legacy_read_t *pci_legacy_read; + ia64_mv_pci_legacy_write_t *pci_legacy_write; + ia64_mv_inb_t *inb; + ia64_mv_inw_t *inw; + ia64_mv_inl_t *inl; + ia64_mv_outb_t *outb; + ia64_mv_outw_t *outw; + ia64_mv_outl_t *outl; + ia64_mv_mmiowb_t *mmiowb; + ia64_mv_readb_t *readb; + ia64_mv_readw_t *readw; + ia64_mv_readl_t *readl; + ia64_mv_readq_t *readq; + ia64_mv_readb_relaxed_t *readb_relaxed; + ia64_mv_readw_relaxed_t *readw_relaxed; + ia64_mv_readl_relaxed_t *readl_relaxed; + ia64_mv_readq_relaxed_t *readq_relaxed; + ia64_mv_migrate_t *migrate; + ia64_mv_setup_msi_irq_t *setup_msi_irq; + ia64_mv_teardown_msi_irq_t *teardown_msi_irq; + ia64_mv_pci_fixup_bus_t *pci_fixup_bus; + ia64_mv_kernel_launch_event_t *kernel_launch_event; +} __attribute__((__aligned__(16))); /* align attrib? see above comment */ + +#define MACHVEC_INIT(name) \ +{ \ + #name, \ + platform_setup, \ + platform_cpu_init, \ + platform_irq_init, \ + platform_send_ipi, \ + platform_timer_interrupt, \ + platform_global_tlb_purge, \ + platform_tlb_migrate_finish, \ + platform_dma_init, \ + platform_dma_alloc_coherent, \ + platform_dma_free_coherent, \ + platform_dma_map_single_attrs, \ + platform_dma_unmap_single_attrs, \ + platform_dma_map_sg_attrs, \ + platform_dma_unmap_sg_attrs, \ + platform_dma_sync_single_for_cpu, \ + platform_dma_sync_sg_for_cpu, \ + platform_dma_sync_single_for_device, \ + platform_dma_sync_sg_for_device, \ + platform_dma_mapping_error, \ + platform_dma_supported, \ + platform_irq_to_vector, \ + platform_local_vector_to_irq, \ + platform_pci_get_legacy_mem, \ + platform_pci_legacy_read, \ + platform_pci_legacy_write, \ + platform_inb, \ + platform_inw, \ + platform_inl, \ + platform_outb, \ + platform_outw, \ + platform_outl, \ + platform_mmiowb, \ + platform_readb, \ + platform_readw, \ + platform_readl, \ + platform_readq, \ + platform_readb_relaxed, \ + platform_readw_relaxed, \ + platform_readl_relaxed, \ + platform_readq_relaxed, \ + platform_migrate, \ + platform_setup_msi_irq, \ + platform_teardown_msi_irq, \ + platform_pci_fixup_bus, \ + platform_kernel_launch_event \ +} + +extern struct ia64_machine_vector ia64_mv; +extern void machvec_init (const char *name); +extern void machvec_init_from_cmdline(const char *cmdline); + +# else +# error Unknown configuration. Update arch/ia64/include/asm/machvec.h. +# endif /* CONFIG_IA64_GENERIC */ + +/* + * Declare default routines which aren't declared anywhere else: + */ +extern ia64_mv_dma_init swiotlb_init; +extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent; +extern ia64_mv_dma_free_coherent swiotlb_free_coherent; +extern ia64_mv_dma_map_single swiotlb_map_single; +extern ia64_mv_dma_map_single_attrs swiotlb_map_single_attrs; +extern ia64_mv_dma_unmap_single swiotlb_unmap_single; +extern ia64_mv_dma_unmap_single_attrs swiotlb_unmap_single_attrs; +extern ia64_mv_dma_map_sg swiotlb_map_sg; +extern ia64_mv_dma_map_sg_attrs swiotlb_map_sg_attrs; +extern ia64_mv_dma_unmap_sg swiotlb_unmap_sg; +extern ia64_mv_dma_unmap_sg_attrs swiotlb_unmap_sg_attrs; +extern ia64_mv_dma_sync_single_for_cpu swiotlb_sync_single_for_cpu; +extern ia64_mv_dma_sync_sg_for_cpu swiotlb_sync_sg_for_cpu; +extern ia64_mv_dma_sync_single_for_device swiotlb_sync_single_for_device; +extern ia64_mv_dma_sync_sg_for_device swiotlb_sync_sg_for_device; +extern ia64_mv_dma_mapping_error swiotlb_dma_mapping_error; +extern ia64_mv_dma_supported swiotlb_dma_supported; + +/* + * Define default versions so we can extend machvec for new platforms without having + * to update the machvec files for all existing platforms. + */ +#ifndef platform_setup +# define platform_setup machvec_setup +#endif +#ifndef platform_cpu_init +# define platform_cpu_init machvec_noop +#endif +#ifndef platform_irq_init +# define platform_irq_init machvec_noop +#endif + +#ifndef platform_send_ipi +# define platform_send_ipi ia64_send_ipi /* default to architected version */ +#endif +#ifndef platform_timer_interrupt +# define platform_timer_interrupt machvec_timer_interrupt +#endif +#ifndef platform_global_tlb_purge +# define platform_global_tlb_purge ia64_global_tlb_purge /* default to architected version */ +#endif +#ifndef platform_tlb_migrate_finish +# define platform_tlb_migrate_finish machvec_noop_mm +#endif +#ifndef platform_kernel_launch_event +# define platform_kernel_launch_event machvec_noop +#endif +#ifndef platform_dma_init +# define platform_dma_init swiotlb_init +#endif +#ifndef platform_dma_alloc_coherent +# define platform_dma_alloc_coherent swiotlb_alloc_coherent +#endif +#ifndef platform_dma_free_coherent +# define platform_dma_free_coherent swiotlb_free_coherent +#endif +#ifndef platform_dma_map_single_attrs +# define platform_dma_map_single_attrs swiotlb_map_single_attrs +#endif +#ifndef platform_dma_unmap_single_attrs +# define platform_dma_unmap_single_attrs swiotlb_unmap_single_attrs +#endif +#ifndef platform_dma_map_sg_attrs +# define platform_dma_map_sg_attrs swiotlb_map_sg_attrs +#endif +#ifndef platform_dma_unmap_sg_attrs +# define platform_dma_unmap_sg_attrs swiotlb_unmap_sg_attrs +#endif +#ifndef platform_dma_sync_single_for_cpu +# define platform_dma_sync_single_for_cpu swiotlb_sync_single_for_cpu +#endif +#ifndef platform_dma_sync_sg_for_cpu +# define platform_dma_sync_sg_for_cpu swiotlb_sync_sg_for_cpu +#endif +#ifndef platform_dma_sync_single_for_device +# define platform_dma_sync_single_for_device swiotlb_sync_single_for_device +#endif +#ifndef platform_dma_sync_sg_for_device +# define platform_dma_sync_sg_for_device swiotlb_sync_sg_for_device +#endif +#ifndef platform_dma_mapping_error +# define platform_dma_mapping_error swiotlb_dma_mapping_error +#endif +#ifndef platform_dma_supported +# define platform_dma_supported swiotlb_dma_supported +#endif +#ifndef platform_irq_to_vector +# define platform_irq_to_vector __ia64_irq_to_vector +#endif +#ifndef platform_local_vector_to_irq +# define platform_local_vector_to_irq __ia64_local_vector_to_irq +#endif +#ifndef platform_pci_get_legacy_mem +# define platform_pci_get_legacy_mem ia64_pci_get_legacy_mem +#endif +#ifndef platform_pci_legacy_read +# define platform_pci_legacy_read ia64_pci_legacy_read +extern int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size); +#endif +#ifndef platform_pci_legacy_write +# define platform_pci_legacy_write ia64_pci_legacy_write +extern int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size); +#endif +#ifndef platform_inb +# define platform_inb __ia64_inb +#endif +#ifndef platform_inw +# define platform_inw __ia64_inw +#endif +#ifndef platform_inl +# define platform_inl __ia64_inl +#endif +#ifndef platform_outb +# define platform_outb __ia64_outb +#endif +#ifndef platform_outw +# define platform_outw __ia64_outw +#endif +#ifndef platform_outl +# define platform_outl __ia64_outl +#endif +#ifndef platform_mmiowb +# define platform_mmiowb __ia64_mmiowb +#endif +#ifndef platform_readb +# define platform_readb __ia64_readb +#endif +#ifndef platform_readw +# define platform_readw __ia64_readw +#endif +#ifndef platform_readl +# define platform_readl __ia64_readl +#endif +#ifndef platform_readq +# define platform_readq __ia64_readq +#endif +#ifndef platform_readb_relaxed +# define platform_readb_relaxed __ia64_readb_relaxed +#endif +#ifndef platform_readw_relaxed +# define platform_readw_relaxed __ia64_readw_relaxed +#endif +#ifndef platform_readl_relaxed +# define platform_readl_relaxed __ia64_readl_relaxed +#endif +#ifndef platform_readq_relaxed +# define platform_readq_relaxed __ia64_readq_relaxed +#endif +#ifndef platform_migrate +# define platform_migrate machvec_noop_task +#endif +#ifndef platform_setup_msi_irq +# define platform_setup_msi_irq ((ia64_mv_setup_msi_irq_t*)NULL) +#endif +#ifndef platform_teardown_msi_irq +# define platform_teardown_msi_irq ((ia64_mv_teardown_msi_irq_t*)NULL) +#endif +#ifndef platform_pci_fixup_bus +# define platform_pci_fixup_bus machvec_noop_bus +#endif + +#endif /* _ASM_IA64_MACHVEC_H */ diff --git a/arch/ia64/include/asm/machvec_dig.h b/arch/ia64/include/asm/machvec_dig.h new file mode 100644 index 000000000000..8a0752f40987 --- /dev/null +++ b/arch/ia64/include/asm/machvec_dig.h @@ -0,0 +1,16 @@ +#ifndef _ASM_IA64_MACHVEC_DIG_h +#define _ASM_IA64_MACHVEC_DIG_h + +extern ia64_mv_setup_t dig_setup; + +/* + * This stuff has dual use! + * + * For a generic kernel, the macros are used to initialize the + * platform's machvec structure. When compiling a non-generic kernel, + * the macros are used directly. + */ +#define platform_name "dig" +#define platform_setup dig_setup + +#endif /* _ASM_IA64_MACHVEC_DIG_h */ diff --git a/arch/ia64/include/asm/machvec_hpsim.h b/arch/ia64/include/asm/machvec_hpsim.h new file mode 100644 index 000000000000..cf72fc87fdfe --- /dev/null +++ b/arch/ia64/include/asm/machvec_hpsim.h @@ -0,0 +1,18 @@ +#ifndef _ASM_IA64_MACHVEC_HPSIM_h +#define _ASM_IA64_MACHVEC_HPSIM_h + +extern ia64_mv_setup_t hpsim_setup; +extern ia64_mv_irq_init_t hpsim_irq_init; + +/* + * This stuff has dual use! + * + * For a generic kernel, the macros are used to initialize the + * platform's machvec structure. When compiling a non-generic kernel, + * the macros are used directly. + */ +#define platform_name "hpsim" +#define platform_setup hpsim_setup +#define platform_irq_init hpsim_irq_init + +#endif /* _ASM_IA64_MACHVEC_HPSIM_h */ diff --git a/arch/ia64/include/asm/machvec_hpzx1.h b/arch/ia64/include/asm/machvec_hpzx1.h new file mode 100644 index 000000000000..2f57f5144b9f --- /dev/null +++ b/arch/ia64/include/asm/machvec_hpzx1.h @@ -0,0 +1,37 @@ +#ifndef _ASM_IA64_MACHVEC_HPZX1_h +#define _ASM_IA64_MACHVEC_HPZX1_h + +extern ia64_mv_setup_t dig_setup; +extern ia64_mv_dma_alloc_coherent sba_alloc_coherent; +extern ia64_mv_dma_free_coherent sba_free_coherent; +extern ia64_mv_dma_map_single_attrs sba_map_single_attrs; +extern ia64_mv_dma_unmap_single_attrs sba_unmap_single_attrs; +extern ia64_mv_dma_map_sg_attrs sba_map_sg_attrs; +extern ia64_mv_dma_unmap_sg_attrs sba_unmap_sg_attrs; +extern ia64_mv_dma_supported sba_dma_supported; +extern ia64_mv_dma_mapping_error sba_dma_mapping_error; + +/* + * This stuff has dual use! + * + * For a generic kernel, the macros are used to initialize the + * platform's machvec structure. When compiling a non-generic kernel, + * the macros are used directly. + */ +#define platform_name "hpzx1" +#define platform_setup dig_setup +#define platform_dma_init machvec_noop +#define platform_dma_alloc_coherent sba_alloc_coherent +#define platform_dma_free_coherent sba_free_coherent +#define platform_dma_map_single_attrs sba_map_single_attrs +#define platform_dma_unmap_single_attrs sba_unmap_single_attrs +#define platform_dma_map_sg_attrs sba_map_sg_attrs +#define platform_dma_unmap_sg_attrs sba_unmap_sg_attrs +#define platform_dma_sync_single_for_cpu machvec_dma_sync_single +#define platform_dma_sync_sg_for_cpu machvec_dma_sync_sg +#define platform_dma_sync_single_for_device machvec_dma_sync_single +#define platform_dma_sync_sg_for_device machvec_dma_sync_sg +#define platform_dma_supported sba_dma_supported +#define platform_dma_mapping_error sba_dma_mapping_error + +#endif /* _ASM_IA64_MACHVEC_HPZX1_h */ diff --git a/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h b/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h new file mode 100644 index 000000000000..a842cdda827b --- /dev/null +++ b/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h @@ -0,0 +1,42 @@ +#ifndef _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h +#define _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h + +extern ia64_mv_setup_t dig_setup; +extern ia64_mv_dma_alloc_coherent hwsw_alloc_coherent; +extern ia64_mv_dma_free_coherent hwsw_free_coherent; +extern ia64_mv_dma_map_single_attrs hwsw_map_single_attrs; +extern ia64_mv_dma_unmap_single_attrs hwsw_unmap_single_attrs; +extern ia64_mv_dma_map_sg_attrs hwsw_map_sg_attrs; +extern ia64_mv_dma_unmap_sg_attrs hwsw_unmap_sg_attrs; +extern ia64_mv_dma_supported hwsw_dma_supported; +extern ia64_mv_dma_mapping_error hwsw_dma_mapping_error; +extern ia64_mv_dma_sync_single_for_cpu hwsw_sync_single_for_cpu; +extern ia64_mv_dma_sync_sg_for_cpu hwsw_sync_sg_for_cpu; +extern ia64_mv_dma_sync_single_for_device hwsw_sync_single_for_device; +extern ia64_mv_dma_sync_sg_for_device hwsw_sync_sg_for_device; + +/* + * This stuff has dual use! + * + * For a generic kernel, the macros are used to initialize the + * platform's machvec structure. When compiling a non-generic kernel, + * the macros are used directly. + */ +#define platform_name "hpzx1_swiotlb" + +#define platform_setup dig_setup +#define platform_dma_init machvec_noop +#define platform_dma_alloc_coherent hwsw_alloc_coherent +#define platform_dma_free_coherent hwsw_free_coherent +#define platform_dma_map_single_attrs hwsw_map_single_attrs +#define platform_dma_unmap_single_attrs hwsw_unmap_single_attrs +#define platform_dma_map_sg_attrs hwsw_map_sg_attrs +#define platform_dma_unmap_sg_attrs hwsw_unmap_sg_attrs +#define platform_dma_supported hwsw_dma_supported +#define platform_dma_mapping_error hwsw_dma_mapping_error +#define platform_dma_sync_single_for_cpu hwsw_sync_single_for_cpu +#define platform_dma_sync_sg_for_cpu hwsw_sync_sg_for_cpu +#define platform_dma_sync_single_for_device hwsw_sync_single_for_device +#define platform_dma_sync_sg_for_device hwsw_sync_sg_for_device + +#endif /* _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h */ diff --git a/arch/ia64/include/asm/machvec_init.h b/arch/ia64/include/asm/machvec_init.h new file mode 100644 index 000000000000..7f21249fba3f --- /dev/null +++ b/arch/ia64/include/asm/machvec_init.h @@ -0,0 +1,33 @@ +#include + +extern ia64_mv_send_ipi_t ia64_send_ipi; +extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge; +extern ia64_mv_irq_to_vector __ia64_irq_to_vector; +extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq; +extern ia64_mv_pci_get_legacy_mem_t ia64_pci_get_legacy_mem; +extern ia64_mv_pci_legacy_read_t ia64_pci_legacy_read; +extern ia64_mv_pci_legacy_write_t ia64_pci_legacy_write; + +extern ia64_mv_inb_t __ia64_inb; +extern ia64_mv_inw_t __ia64_inw; +extern ia64_mv_inl_t __ia64_inl; +extern ia64_mv_outb_t __ia64_outb; +extern ia64_mv_outw_t __ia64_outw; +extern ia64_mv_outl_t __ia64_outl; +extern ia64_mv_mmiowb_t __ia64_mmiowb; +extern ia64_mv_readb_t __ia64_readb; +extern ia64_mv_readw_t __ia64_readw; +extern ia64_mv_readl_t __ia64_readl; +extern ia64_mv_readq_t __ia64_readq; +extern ia64_mv_readb_t __ia64_readb_relaxed; +extern ia64_mv_readw_t __ia64_readw_relaxed; +extern ia64_mv_readl_t __ia64_readl_relaxed; +extern ia64_mv_readq_t __ia64_readq_relaxed; + +#define MACHVEC_HELPER(name) \ + struct ia64_machine_vector machvec_##name __attribute__ ((unused, __section__ (".machvec"))) \ + = MACHVEC_INIT(name); + +#define MACHVEC_DEFINE(name) MACHVEC_HELPER(name) + +MACHVEC_DEFINE(MACHVEC_PLATFORM_NAME) diff --git a/arch/ia64/include/asm/machvec_sn2.h b/arch/ia64/include/asm/machvec_sn2.h new file mode 100644 index 000000000000..781308ea7b88 --- /dev/null +++ b/arch/ia64/include/asm/machvec_sn2.h @@ -0,0 +1,139 @@ +/* + * Copyright (c) 2002-2003,2006 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * For further information regarding this notice, see: + * + * http://oss.sgi.com/projects/GenInfo/NoticeExplan + */ + +#ifndef _ASM_IA64_MACHVEC_SN2_H +#define _ASM_IA64_MACHVEC_SN2_H + +extern ia64_mv_setup_t sn_setup; +extern ia64_mv_cpu_init_t sn_cpu_init; +extern ia64_mv_irq_init_t sn_irq_init; +extern ia64_mv_send_ipi_t sn2_send_IPI; +extern ia64_mv_timer_interrupt_t sn_timer_interrupt; +extern ia64_mv_global_tlb_purge_t sn2_global_tlb_purge; +extern ia64_mv_tlb_migrate_finish_t sn_tlb_migrate_finish; +extern ia64_mv_irq_to_vector sn_irq_to_vector; +extern ia64_mv_local_vector_to_irq sn_local_vector_to_irq; +extern ia64_mv_pci_get_legacy_mem_t sn_pci_get_legacy_mem; +extern ia64_mv_pci_legacy_read_t sn_pci_legacy_read; +extern ia64_mv_pci_legacy_write_t sn_pci_legacy_write; +extern ia64_mv_inb_t __sn_inb; +extern ia64_mv_inw_t __sn_inw; +extern ia64_mv_inl_t __sn_inl; +extern ia64_mv_outb_t __sn_outb; +extern ia64_mv_outw_t __sn_outw; +extern ia64_mv_outl_t __sn_outl; +extern ia64_mv_mmiowb_t __sn_mmiowb; +extern ia64_mv_readb_t __sn_readb; +extern ia64_mv_readw_t __sn_readw; +extern ia64_mv_readl_t __sn_readl; +extern ia64_mv_readq_t __sn_readq; +extern ia64_mv_readb_t __sn_readb_relaxed; +extern ia64_mv_readw_t __sn_readw_relaxed; +extern ia64_mv_readl_t __sn_readl_relaxed; +extern ia64_mv_readq_t __sn_readq_relaxed; +extern ia64_mv_dma_alloc_coherent sn_dma_alloc_coherent; +extern ia64_mv_dma_free_coherent sn_dma_free_coherent; +extern ia64_mv_dma_map_single_attrs sn_dma_map_single_attrs; +extern ia64_mv_dma_unmap_single_attrs sn_dma_unmap_single_attrs; +extern ia64_mv_dma_map_sg_attrs sn_dma_map_sg_attrs; +extern ia64_mv_dma_unmap_sg_attrs sn_dma_unmap_sg_attrs; +extern ia64_mv_dma_sync_single_for_cpu sn_dma_sync_single_for_cpu; +extern ia64_mv_dma_sync_sg_for_cpu sn_dma_sync_sg_for_cpu; +extern ia64_mv_dma_sync_single_for_device sn_dma_sync_single_for_device; +extern ia64_mv_dma_sync_sg_for_device sn_dma_sync_sg_for_device; +extern ia64_mv_dma_mapping_error sn_dma_mapping_error; +extern ia64_mv_dma_supported sn_dma_supported; +extern ia64_mv_migrate_t sn_migrate; +extern ia64_mv_kernel_launch_event_t sn_kernel_launch_event; +extern ia64_mv_setup_msi_irq_t sn_setup_msi_irq; +extern ia64_mv_teardown_msi_irq_t sn_teardown_msi_irq; +extern ia64_mv_pci_fixup_bus_t sn_pci_fixup_bus; + + +/* + * This stuff has dual use! + * + * For a generic kernel, the macros are used to initialize the + * platform's machvec structure. When compiling a non-generic kernel, + * the macros are used directly. + */ +#define platform_name "sn2" +#define platform_setup sn_setup +#define platform_cpu_init sn_cpu_init +#define platform_irq_init sn_irq_init +#define platform_send_ipi sn2_send_IPI +#define platform_timer_interrupt sn_timer_interrupt +#define platform_global_tlb_purge sn2_global_tlb_purge +#define platform_tlb_migrate_finish sn_tlb_migrate_finish +#define platform_pci_fixup sn_pci_fixup +#define platform_inb __sn_inb +#define platform_inw __sn_inw +#define platform_inl __sn_inl +#define platform_outb __sn_outb +#define platform_outw __sn_outw +#define platform_outl __sn_outl +#define platform_mmiowb __sn_mmiowb +#define platform_readb __sn_readb +#define platform_readw __sn_readw +#define platform_readl __sn_readl +#define platform_readq __sn_readq +#define platform_readb_relaxed __sn_readb_relaxed +#define platform_readw_relaxed __sn_readw_relaxed +#define platform_readl_relaxed __sn_readl_relaxed +#define platform_readq_relaxed __sn_readq_relaxed +#define platform_irq_to_vector sn_irq_to_vector +#define platform_local_vector_to_irq sn_local_vector_to_irq +#define platform_pci_get_legacy_mem sn_pci_get_legacy_mem +#define platform_pci_legacy_read sn_pci_legacy_read +#define platform_pci_legacy_write sn_pci_legacy_write +#define platform_dma_init machvec_noop +#define platform_dma_alloc_coherent sn_dma_alloc_coherent +#define platform_dma_free_coherent sn_dma_free_coherent +#define platform_dma_map_single_attrs sn_dma_map_single_attrs +#define platform_dma_unmap_single_attrs sn_dma_unmap_single_attrs +#define platform_dma_map_sg_attrs sn_dma_map_sg_attrs +#define platform_dma_unmap_sg_attrs sn_dma_unmap_sg_attrs +#define platform_dma_sync_single_for_cpu sn_dma_sync_single_for_cpu +#define platform_dma_sync_sg_for_cpu sn_dma_sync_sg_for_cpu +#define platform_dma_sync_single_for_device sn_dma_sync_single_for_device +#define platform_dma_sync_sg_for_device sn_dma_sync_sg_for_device +#define platform_dma_mapping_error sn_dma_mapping_error +#define platform_dma_supported sn_dma_supported +#define platform_migrate sn_migrate +#define platform_kernel_launch_event sn_kernel_launch_event +#ifdef CONFIG_PCI_MSI +#define platform_setup_msi_irq sn_setup_msi_irq +#define platform_teardown_msi_irq sn_teardown_msi_irq +#else +#define platform_setup_msi_irq ((ia64_mv_setup_msi_irq_t*)NULL) +#define platform_teardown_msi_irq ((ia64_mv_teardown_msi_irq_t*)NULL) +#endif +#define platform_pci_fixup_bus sn_pci_fixup_bus + +#include + +#endif /* _ASM_IA64_MACHVEC_SN2_H */ diff --git a/arch/ia64/include/asm/machvec_uv.h b/arch/ia64/include/asm/machvec_uv.h new file mode 100644 index 000000000000..2931447f3813 --- /dev/null +++ b/arch/ia64/include/asm/machvec_uv.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * SGI UV Core Functions + * + * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_MACHVEC_UV_H +#define _ASM_IA64_MACHVEC_UV_H + +extern ia64_mv_setup_t uv_setup; + +/* + * This stuff has dual use! + * + * For a generic kernel, the macros are used to initialize the + * platform's machvec structure. When compiling a non-generic kernel, + * the macros are used directly. + */ +#define platform_name "uv" +#define platform_setup uv_setup + +#endif /* _ASM_IA64_MACHVEC_UV_H */ diff --git a/arch/ia64/include/asm/mc146818rtc.h b/arch/ia64/include/asm/mc146818rtc.h new file mode 100644 index 000000000000..407787a237ba --- /dev/null +++ b/arch/ia64/include/asm/mc146818rtc.h @@ -0,0 +1,10 @@ +#ifndef _ASM_IA64_MC146818RTC_H +#define _ASM_IA64_MC146818RTC_H + +/* + * Machine dependent access functions for RTC registers. + */ + +/* empty include file to satisfy the include in genrtc.c */ + +#endif /* _ASM_IA64_MC146818RTC_H */ diff --git a/arch/ia64/include/asm/mca.h b/arch/ia64/include/asm/mca.h new file mode 100644 index 000000000000..18a4321349a3 --- /dev/null +++ b/arch/ia64/include/asm/mca.h @@ -0,0 +1,179 @@ +/* + * File: mca.h + * Purpose: Machine check handling specific defines + * + * Copyright (C) 1999, 2004 Silicon Graphics, Inc. + * Copyright (C) Vijay Chander + * Copyright (C) Srinivasa Thirumalachar + * Copyright (C) Russ Anderson + */ + +#ifndef _ASM_IA64_MCA_H +#define _ASM_IA64_MCA_H + +#if !defined(__ASSEMBLY__) + +#include +#include + +#include +#include +#include +#include + +#define IA64_MCA_RENDEZ_TIMEOUT (20 * 1000) /* value in milliseconds - 20 seconds */ + +typedef struct ia64_fptr { + unsigned long fp; + unsigned long gp; +} ia64_fptr_t; + +typedef union cmcv_reg_u { + u64 cmcv_regval; + struct { + u64 cmcr_vector : 8; + u64 cmcr_reserved1 : 4; + u64 cmcr_ignored1 : 1; + u64 cmcr_reserved2 : 3; + u64 cmcr_mask : 1; + u64 cmcr_ignored2 : 47; + } cmcv_reg_s; + +} cmcv_reg_t; + +#define cmcv_mask cmcv_reg_s.cmcr_mask +#define cmcv_vector cmcv_reg_s.cmcr_vector + +enum { + IA64_MCA_RENDEZ_CHECKIN_NOTDONE = 0x0, + IA64_MCA_RENDEZ_CHECKIN_DONE = 0x1, + IA64_MCA_RENDEZ_CHECKIN_INIT = 0x2, + IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA = 0x3, +}; + +/* Information maintained by the MC infrastructure */ +typedef struct ia64_mc_info_s { + u64 imi_mca_handler; + size_t imi_mca_handler_size; + u64 imi_monarch_init_handler; + size_t imi_monarch_init_handler_size; + u64 imi_slave_init_handler; + size_t imi_slave_init_handler_size; + u8 imi_rendez_checkin[NR_CPUS]; + +} ia64_mc_info_t; + +/* Handover state from SAL to OS and vice versa, for both MCA and INIT events. + * Besides the handover state, it also contains some saved registers from the + * time of the event. + * Note: mca_asm.S depends on the precise layout of this structure. + */ + +struct ia64_sal_os_state { + + /* SAL to OS */ + u64 os_gp; /* GP of the os registered with the SAL, physical */ + u64 pal_proc; /* PAL_PROC entry point, physical */ + u64 sal_proc; /* SAL_PROC entry point, physical */ + u64 rv_rc; /* MCA - Rendezvous state, INIT - reason code */ + u64 proc_state_param; /* from R18 */ + u64 monarch; /* 1 for a monarch event, 0 for a slave */ + + /* common */ + u64 sal_ra; /* Return address in SAL, physical */ + u64 sal_gp; /* GP of the SAL - physical */ + pal_min_state_area_t *pal_min_state; /* from R17. physical in asm, virtual in C */ + /* Previous values of IA64_KR(CURRENT) and IA64_KR(CURRENT_STACK). + * Note: if the MCA/INIT recovery code wants to resume to a new context + * then it must change these values to reflect the new kernel stack. + */ + u64 prev_IA64_KR_CURRENT; /* previous value of IA64_KR(CURRENT) */ + u64 prev_IA64_KR_CURRENT_STACK; + struct task_struct *prev_task; /* previous task, NULL if it is not useful */ + /* Some interrupt registers are not saved in minstate, pt_regs or + * switch_stack. Because MCA/INIT can occur when interrupts are + * disabled, we need to save the additional interrupt registers over + * MCA/INIT and resume. + */ + u64 isr; + u64 ifa; + u64 itir; + u64 iipa; + u64 iim; + u64 iha; + + /* OS to SAL */ + u64 os_status; /* OS status to SAL, enum below */ + u64 context; /* 0 if return to same context + 1 if return to new context */ +}; + +enum { + IA64_MCA_CORRECTED = 0x0, /* Error has been corrected by OS_MCA */ + IA64_MCA_WARM_BOOT = -1, /* Warm boot of the system need from SAL */ + IA64_MCA_COLD_BOOT = -2, /* Cold boot of the system need from SAL */ + IA64_MCA_HALT = -3 /* System to be halted by SAL */ +}; + +enum { + IA64_INIT_RESUME = 0x0, /* Resume after return from INIT */ + IA64_INIT_WARM_BOOT = -1, /* Warm boot of the system need from SAL */ +}; + +enum { + IA64_MCA_SAME_CONTEXT = 0x0, /* SAL to return to same context */ + IA64_MCA_NEW_CONTEXT = -1 /* SAL to return to new context */ +}; + +/* Per-CPU MCA state that is too big for normal per-CPU variables. */ + +struct ia64_mca_cpu { + u64 mca_stack[KERNEL_STACK_SIZE/8]; + u64 init_stack[KERNEL_STACK_SIZE/8]; +}; + +/* Array of physical addresses of each CPU's MCA area. */ +extern unsigned long __per_cpu_mca[NR_CPUS]; + +extern int cpe_vector; +extern int ia64_cpe_irq; +extern void ia64_mca_init(void); +extern void ia64_mca_cpu_init(void *); +extern void ia64_os_mca_dispatch(void); +extern void ia64_os_mca_dispatch_end(void); +extern void ia64_mca_ucmc_handler(struct pt_regs *, struct ia64_sal_os_state *); +extern void ia64_init_handler(struct pt_regs *, + struct switch_stack *, + struct ia64_sal_os_state *); +extern void ia64_monarch_init_handler(void); +extern void ia64_slave_init_handler(void); +extern void ia64_mca_cmc_vector_setup(void); +extern int ia64_reg_MCA_extension(int (*fn)(void *, struct ia64_sal_os_state *)); +extern void ia64_unreg_MCA_extension(void); +extern u64 ia64_get_rnat(u64 *); +extern void ia64_mca_printk(const char * fmt, ...) + __attribute__ ((format (printf, 1, 2))); + +struct ia64_mca_notify_die { + struct ia64_sal_os_state *sos; + int *monarch_cpu; + int *data; +}; + +DECLARE_PER_CPU(u64, ia64_mca_pal_base); + +#else /* __ASSEMBLY__ */ + +#define IA64_MCA_CORRECTED 0x0 /* Error has been corrected by OS_MCA */ +#define IA64_MCA_WARM_BOOT -1 /* Warm boot of the system need from SAL */ +#define IA64_MCA_COLD_BOOT -2 /* Cold boot of the system need from SAL */ +#define IA64_MCA_HALT -3 /* System to be halted by SAL */ + +#define IA64_INIT_RESUME 0x0 /* Resume after return from INIT */ +#define IA64_INIT_WARM_BOOT -1 /* Warm boot of the system need from SAL */ + +#define IA64_MCA_SAME_CONTEXT 0x0 /* SAL to return to same context */ +#define IA64_MCA_NEW_CONTEXT -1 /* SAL to return to new context */ + +#endif /* !__ASSEMBLY__ */ +#endif /* _ASM_IA64_MCA_H */ diff --git a/arch/ia64/include/asm/mca_asm.h b/arch/ia64/include/asm/mca_asm.h new file mode 100644 index 000000000000..dd2a5b134390 --- /dev/null +++ b/arch/ia64/include/asm/mca_asm.h @@ -0,0 +1,242 @@ +/* + * File: mca_asm.h + * Purpose: Machine check handling specific defines + * + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) Vijay Chander + * Copyright (C) Srinivasa Thirumalachar + * Copyright (C) 2000 Hewlett-Packard Co. + * Copyright (C) 2000 David Mosberger-Tang + * Copyright (C) 2002 Intel Corp. + * Copyright (C) 2002 Jenna Hall + * Copyright (C) 2005 Silicon Graphics, Inc + * Copyright (C) 2005 Keith Owens + */ +#ifndef _ASM_IA64_MCA_ASM_H +#define _ASM_IA64_MCA_ASM_H + +#define PSR_IC 13 +#define PSR_I 14 +#define PSR_DT 17 +#define PSR_RT 27 +#define PSR_MC 35 +#define PSR_IT 36 +#define PSR_BN 44 + +/* + * This macro converts a instruction virtual address to a physical address + * Right now for simulation purposes the virtual addresses are + * direct mapped to physical addresses. + * 1. Lop off bits 61 thru 63 in the virtual address + */ +#define INST_VA_TO_PA(addr) \ + dep addr = 0, addr, 61, 3 +/* + * This macro converts a data virtual address to a physical address + * Right now for simulation purposes the virtual addresses are + * direct mapped to physical addresses. + * 1. Lop off bits 61 thru 63 in the virtual address + */ +#define DATA_VA_TO_PA(addr) \ + tpa addr = addr +/* + * This macro converts a data physical address to a virtual address + * Right now for simulation purposes the virtual addresses are + * direct mapped to physical addresses. + * 1. Put 0x7 in bits 61 thru 63. + */ +#define DATA_PA_TO_VA(addr,temp) \ + mov temp = 0x7 ;; \ + dep addr = temp, addr, 61, 3 + +#define GET_THIS_PADDR(reg, var) \ + mov reg = IA64_KR(PER_CPU_DATA);; \ + addl reg = THIS_CPU(var), reg + +/* + * This macro jumps to the instruction at the given virtual address + * and starts execution in physical mode with all the address + * translations turned off. + * 1. Save the current psr + * 2. Make sure that all the upper 32 bits are off + * + * 3. Clear the interrupt enable and interrupt state collection bits + * in the psr before updating the ipsr and iip. + * + * 4. Turn off the instruction, data and rse translation bits of the psr + * and store the new value into ipsr + * Also make sure that the interrupts are disabled. + * Ensure that we are in little endian mode. + * [psr.{rt, it, dt, i, be} = 0] + * + * 5. Get the physical address corresponding to the virtual address + * of the next instruction bundle and put it in iip. + * (Using magic numbers 24 and 40 in the deposint instruction since + * the IA64_SDK code directly maps to lower 24bits as physical address + * from a virtual address). + * + * 6. Do an rfi to move the values from ipsr to psr and iip to ip. + */ +#define PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \ + mov old_psr = psr; \ + ;; \ + dep old_psr = 0, old_psr, 32, 32; \ + \ + mov ar.rsc = 0 ; \ + ;; \ + srlz.d; \ + mov temp2 = ar.bspstore; \ + ;; \ + DATA_VA_TO_PA(temp2); \ + ;; \ + mov temp1 = ar.rnat; \ + ;; \ + mov ar.bspstore = temp2; \ + ;; \ + mov ar.rnat = temp1; \ + mov temp1 = psr; \ + mov temp2 = psr; \ + ;; \ + \ + dep temp2 = 0, temp2, PSR_IC, 2; \ + ;; \ + mov psr.l = temp2; \ + ;; \ + srlz.d; \ + dep temp1 = 0, temp1, 32, 32; \ + ;; \ + dep temp1 = 0, temp1, PSR_IT, 1; \ + ;; \ + dep temp1 = 0, temp1, PSR_DT, 1; \ + ;; \ + dep temp1 = 0, temp1, PSR_RT, 1; \ + ;; \ + dep temp1 = 0, temp1, PSR_I, 1; \ + ;; \ + dep temp1 = 0, temp1, PSR_IC, 1; \ + ;; \ + dep temp1 = -1, temp1, PSR_MC, 1; \ + ;; \ + mov cr.ipsr = temp1; \ + ;; \ + LOAD_PHYSICAL(p0, temp2, start_addr); \ + ;; \ + mov cr.iip = temp2; \ + mov cr.ifs = r0; \ + DATA_VA_TO_PA(sp); \ + DATA_VA_TO_PA(gp); \ + ;; \ + srlz.i; \ + ;; \ + nop 1; \ + nop 2; \ + nop 1; \ + nop 2; \ + rfi; \ + ;; + +/* + * This macro jumps to the instruction at the given virtual address + * and starts execution in virtual mode with all the address + * translations turned on. + * 1. Get the old saved psr + * + * 2. Clear the interrupt state collection bit in the current psr. + * + * 3. Set the instruction translation bit back in the old psr + * Note we have to do this since we are right now saving only the + * lower 32-bits of old psr.(Also the old psr has the data and + * rse translation bits on) + * + * 4. Set ipsr to this old_psr with "it" bit set and "bn" = 1. + * + * 5. Reset the current thread pointer (r13). + * + * 6. Set iip to the virtual address of the next instruction bundle. + * + * 7. Do an rfi to move ipsr to psr and iip to ip. + */ + +#define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \ + mov temp2 = psr; \ + ;; \ + mov old_psr = temp2; \ + ;; \ + dep temp2 = 0, temp2, PSR_IC, 2; \ + ;; \ + mov psr.l = temp2; \ + mov ar.rsc = 0; \ + ;; \ + srlz.d; \ + mov r13 = ar.k6; \ + mov temp2 = ar.bspstore; \ + ;; \ + DATA_PA_TO_VA(temp2,temp1); \ + ;; \ + mov temp1 = ar.rnat; \ + ;; \ + mov ar.bspstore = temp2; \ + ;; \ + mov ar.rnat = temp1; \ + ;; \ + mov temp1 = old_psr; \ + ;; \ + mov temp2 = 1; \ + ;; \ + dep temp1 = temp2, temp1, PSR_IC, 1; \ + ;; \ + dep temp1 = temp2, temp1, PSR_IT, 1; \ + ;; \ + dep temp1 = temp2, temp1, PSR_DT, 1; \ + ;; \ + dep temp1 = temp2, temp1, PSR_RT, 1; \ + ;; \ + dep temp1 = temp2, temp1, PSR_BN, 1; \ + ;; \ + \ + mov cr.ipsr = temp1; \ + movl temp2 = start_addr; \ + ;; \ + mov cr.iip = temp2; \ + movl gp = __gp \ + ;; \ + DATA_PA_TO_VA(sp, temp1); \ + srlz.i; \ + ;; \ + nop 1; \ + nop 2; \ + nop 1; \ + rfi \ + ;; + +/* + * The MCA and INIT stacks in struct ia64_mca_cpu look like normal kernel + * stacks, except that the SAL/OS state and a switch_stack are stored near the + * top of the MCA/INIT stack. To support concurrent entry to MCA or INIT, as + * well as MCA over INIT, each event needs its own SAL/OS state. All entries + * are 16 byte aligned. + * + * +---------------------------+ + * | pt_regs | + * +---------------------------+ + * | switch_stack | + * +---------------------------+ + * | SAL/OS state | + * +---------------------------+ + * | 16 byte scratch area | + * +---------------------------+ <-------- SP at start of C MCA handler + * | ..... | + * +---------------------------+ + * | RBS for MCA/INIT handler | + * +---------------------------+ + * | struct task for MCA/INIT | + * +---------------------------+ <-------- Bottom of MCA/INIT stack + */ + +#define ALIGN16(x) ((x)&~15) +#define MCA_PT_REGS_OFFSET ALIGN16(KERNEL_STACK_SIZE-IA64_PT_REGS_SIZE) +#define MCA_SWITCH_STACK_OFFSET ALIGN16(MCA_PT_REGS_OFFSET-IA64_SWITCH_STACK_SIZE) +#define MCA_SOS_OFFSET ALIGN16(MCA_SWITCH_STACK_OFFSET-IA64_SAL_OS_STATE_SIZE) +#define MCA_SP_OFFSET ALIGN16(MCA_SOS_OFFSET-16) + +#endif /* _ASM_IA64_MCA_ASM_H */ diff --git a/arch/ia64/include/asm/meminit.h b/arch/ia64/include/asm/meminit.h new file mode 100644 index 000000000000..7245a5781594 --- /dev/null +++ b/arch/ia64/include/asm/meminit.h @@ -0,0 +1,75 @@ +#ifndef meminit_h +#define meminit_h + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + + +/* + * Entries defined so far: + * - boot param structure itself + * - memory map + * - initrd (optional) + * - command line string + * - kernel code & data + * - crash dumping code reserved region + * - Kernel memory map built from EFI memory map + * - ELF core header + * + * More could be added if necessary + */ +#define IA64_MAX_RSVD_REGIONS 8 + +struct rsvd_region { + unsigned long start; /* virtual address of beginning of element */ + unsigned long end; /* virtual address of end of element + 1 */ +}; + +extern struct rsvd_region rsvd_region[IA64_MAX_RSVD_REGIONS + 1]; +extern int num_rsvd_regions; + +extern void find_memory (void); +extern void reserve_memory (void); +extern void find_initrd (void); +extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg); +extern int filter_memory (unsigned long start, unsigned long end, void *arg); +extern unsigned long efi_memmap_init(unsigned long *s, unsigned long *e); +extern int find_max_min_low_pfn (unsigned long , unsigned long, void *); + +extern unsigned long vmcore_find_descriptor_size(unsigned long address); +extern int reserve_elfcorehdr(unsigned long *start, unsigned long *end); + +/* + * For rounding an address to the next IA64_GRANULE_SIZE or order + */ +#define GRANULEROUNDDOWN(n) ((n) & ~(IA64_GRANULE_SIZE-1)) +#define GRANULEROUNDUP(n) (((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1)) +#define ORDERROUNDDOWN(n) ((n) & ~((PAGE_SIZE< than this */ + extern unsigned long vmalloc_end; + extern struct page *vmem_map; + extern int find_largest_hole (u64 start, u64 end, void *arg); + extern int create_mem_map_page_table (u64 start, u64 end, void *arg); + extern int vmemmap_find_next_valid_pfn(int, int); +#else +static inline int vmemmap_find_next_valid_pfn(int node, int i) +{ + return i + 1; +} +#endif +#endif /* meminit_h */ diff --git a/arch/ia64/include/asm/mman.h b/arch/ia64/include/asm/mman.h new file mode 100644 index 000000000000..c73b87832a1e --- /dev/null +++ b/arch/ia64/include/asm/mman.h @@ -0,0 +1,33 @@ +#ifndef _ASM_IA64_MMAN_H +#define _ASM_IA64_MMAN_H + +/* + * Based on . + * + * Modified 1998-2000, 2002 + * David Mosberger-Tang , Hewlett-Packard Co + */ + +#include + +#define MAP_GROWSDOWN 0x00100 /* stack-like segment */ +#define MAP_GROWSUP 0x00200 /* register stack-like segment */ +#define MAP_DENYWRITE 0x00800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x01000 /* mark it as an executable */ +#define MAP_LOCKED 0x02000 /* pages are locked */ +#define MAP_NORESERVE 0x04000 /* don't check for reservations */ +#define MAP_POPULATE 0x08000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ +#define arch_mmap_check ia64_mmap_check +int ia64_mmap_check(unsigned long addr, unsigned long len, + unsigned long flags); +#endif +#endif + +#endif /* _ASM_IA64_MMAN_H */ diff --git a/arch/ia64/include/asm/mmu.h b/arch/ia64/include/asm/mmu.h new file mode 100644 index 000000000000..611432ba579c --- /dev/null +++ b/arch/ia64/include/asm/mmu.h @@ -0,0 +1,13 @@ +#ifndef __MMU_H +#define __MMU_H + +/* + * Type for a context number. We declare it volatile to ensure proper + * ordering when it's accessed outside of spinlock'd critical sections + * (e.g., as done in activate_mm() and init_new_context()). + */ +typedef volatile unsigned long mm_context_t; + +typedef unsigned long nv_mm_context_t; + +#endif diff --git a/arch/ia64/include/asm/mmu_context.h b/arch/ia64/include/asm/mmu_context.h new file mode 100644 index 000000000000..040bc87db930 --- /dev/null +++ b/arch/ia64/include/asm/mmu_context.h @@ -0,0 +1,198 @@ +#ifndef _ASM_IA64_MMU_CONTEXT_H +#define _ASM_IA64_MMU_CONTEXT_H + +/* + * Copyright (C) 1998-2002 Hewlett-Packard Co + * David Mosberger-Tang + */ + +/* + * Routines to manage the allocation of task context numbers. Task context + * numbers are used to reduce or eliminate the need to perform TLB flushes + * due to context switches. Context numbers are implemented using ia-64 + * region ids. Since the IA-64 TLB does not consider the region number when + * performing a TLB lookup, we need to assign a unique region id to each + * region in a process. We use the least significant three bits in aregion + * id for this purpose. + */ + +#define IA64_REGION_ID_KERNEL 0 /* the kernel's region id (tlb.c depends on this being 0) */ + +#define ia64_rid(ctx,addr) (((ctx) << 3) | (addr >> 61)) + +# include +# ifndef __ASSEMBLY__ + +#include +#include +#include +#include + +#include +#include + +struct ia64_ctx { + spinlock_t lock; + unsigned int next; /* next context number to use */ + unsigned int limit; /* available free range */ + unsigned int max_ctx; /* max. context value supported by all CPUs */ + /* call wrap_mmu_context when next >= max */ + unsigned long *bitmap; /* bitmap size is max_ctx+1 */ + unsigned long *flushmap;/* pending rid to be flushed */ +}; + +extern struct ia64_ctx ia64_ctx; +DECLARE_PER_CPU(u8, ia64_need_tlb_flush); + +extern void mmu_context_init (void); +extern void wrap_mmu_context (struct mm_struct *mm); + +static inline void +enter_lazy_tlb (struct mm_struct *mm, struct task_struct *tsk) +{ +} + +/* + * When the context counter wraps around all TLBs need to be flushed because + * an old context number might have been reused. This is signalled by the + * ia64_need_tlb_flush per-CPU variable, which is checked in the routine + * below. Called by activate_mm(). + */ +static inline void +delayed_tlb_flush (void) +{ + extern void local_flush_tlb_all (void); + unsigned long flags; + + if (unlikely(__ia64_per_cpu_var(ia64_need_tlb_flush))) { + spin_lock_irqsave(&ia64_ctx.lock, flags); + if (__ia64_per_cpu_var(ia64_need_tlb_flush)) { + local_flush_tlb_all(); + __ia64_per_cpu_var(ia64_need_tlb_flush) = 0; + } + spin_unlock_irqrestore(&ia64_ctx.lock, flags); + } +} + +static inline nv_mm_context_t +get_mmu_context (struct mm_struct *mm) +{ + unsigned long flags; + nv_mm_context_t context = mm->context; + + if (likely(context)) + goto out; + + spin_lock_irqsave(&ia64_ctx.lock, flags); + /* re-check, now that we've got the lock: */ + context = mm->context; + if (context == 0) { + cpus_clear(mm->cpu_vm_mask); + if (ia64_ctx.next >= ia64_ctx.limit) { + ia64_ctx.next = find_next_zero_bit(ia64_ctx.bitmap, + ia64_ctx.max_ctx, ia64_ctx.next); + ia64_ctx.limit = find_next_bit(ia64_ctx.bitmap, + ia64_ctx.max_ctx, ia64_ctx.next); + if (ia64_ctx.next >= ia64_ctx.max_ctx) + wrap_mmu_context(mm); + } + mm->context = context = ia64_ctx.next++; + __set_bit(context, ia64_ctx.bitmap); + } + spin_unlock_irqrestore(&ia64_ctx.lock, flags); +out: + /* + * Ensure we're not starting to use "context" before any old + * uses of it are gone from our TLB. + */ + delayed_tlb_flush(); + + return context; +} + +/* + * Initialize context number to some sane value. MM is guaranteed to be a + * brand-new address-space, so no TLB flushing is needed, ever. + */ +static inline int +init_new_context (struct task_struct *p, struct mm_struct *mm) +{ + mm->context = 0; + return 0; +} + +static inline void +destroy_context (struct mm_struct *mm) +{ + /* Nothing to do. */ +} + +static inline void +reload_context (nv_mm_context_t context) +{ + unsigned long rid; + unsigned long rid_incr = 0; + unsigned long rr0, rr1, rr2, rr3, rr4, old_rr4; + + old_rr4 = ia64_get_rr(RGN_BASE(RGN_HPAGE)); + rid = context << 3; /* make space for encoding the region number */ + rid_incr = 1 << 8; + + /* encode the region id, preferred page size, and VHPT enable bit: */ + rr0 = (rid << 8) | (PAGE_SHIFT << 2) | 1; + rr1 = rr0 + 1*rid_incr; + rr2 = rr0 + 2*rid_incr; + rr3 = rr0 + 3*rid_incr; + rr4 = rr0 + 4*rid_incr; +#ifdef CONFIG_HUGETLB_PAGE + rr4 = (rr4 & (~(0xfcUL))) | (old_rr4 & 0xfc); + +# if RGN_HPAGE != 4 +# error "reload_context assumes RGN_HPAGE is 4" +# endif +#endif + + ia64_set_rr0_to_rr4(rr0, rr1, rr2, rr3, rr4); + ia64_srlz_i(); /* srlz.i implies srlz.d */ +} + +/* + * Must be called with preemption off + */ +static inline void +activate_context (struct mm_struct *mm) +{ + nv_mm_context_t context; + + do { + context = get_mmu_context(mm); + if (!cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) + cpu_set(smp_processor_id(), mm->cpu_vm_mask); + reload_context(context); + /* + * in the unlikely event of a TLB-flush by another thread, + * redo the load. + */ + } while (unlikely(context != mm->context)); +} + +#define deactivate_mm(tsk,mm) do { } while (0) + +/* + * Switch from address space PREV to address space NEXT. + */ +static inline void +activate_mm (struct mm_struct *prev, struct mm_struct *next) +{ + /* + * We may get interrupts here, but that's OK because interrupt + * handlers cannot touch user-space. + */ + ia64_set_kr(IA64_KR_PT_BASE, __pa(next->pgd)); + activate_context(next); +} + +#define switch_mm(prev_mm,next_mm,next_task) activate_mm(prev_mm, next_mm) + +# endif /* ! __ASSEMBLY__ */ +#endif /* _ASM_IA64_MMU_CONTEXT_H */ diff --git a/arch/ia64/include/asm/mmzone.h b/arch/ia64/include/asm/mmzone.h new file mode 100644 index 000000000000..34efe88eb849 --- /dev/null +++ b/arch/ia64/include/asm/mmzone.h @@ -0,0 +1,50 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2000,2003 Silicon Graphics, Inc. All rights reserved. + * Copyright (c) 2002 NEC Corp. + * Copyright (c) 2002 Erich Focht + * Copyright (c) 2002 Kimio Suganuma + */ +#ifndef _ASM_IA64_MMZONE_H +#define _ASM_IA64_MMZONE_H + +#include +#include +#include + +#ifdef CONFIG_NUMA + +static inline int pfn_to_nid(unsigned long pfn) +{ +#ifdef CONFIG_NUMA + extern int paddr_to_nid(unsigned long); + int nid = paddr_to_nid(pfn << PAGE_SHIFT); + if (nid < 0) + return 0; + else + return nid; +#else + return 0; +#endif +} + +#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID +extern int early_pfn_to_nid(unsigned long pfn); +#endif + +#ifdef CONFIG_IA64_DIG /* DIG systems are small */ +# define MAX_PHYSNODE_ID 8 +# define NR_NODE_MEMBLKS (MAX_NUMNODES * 8) +#else /* sn2 is the biggest case, so we use that if !DIG */ +# define MAX_PHYSNODE_ID 2048 +# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4) +#endif + +#else /* CONFIG_NUMA */ +# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4) +#endif /* CONFIG_NUMA */ + +#endif /* _ASM_IA64_MMZONE_H */ diff --git a/arch/ia64/include/asm/module.h b/arch/ia64/include/asm/module.h new file mode 100644 index 000000000000..d2da61e4c49b --- /dev/null +++ b/arch/ia64/include/asm/module.h @@ -0,0 +1,36 @@ +#ifndef _ASM_IA64_MODULE_H +#define _ASM_IA64_MODULE_H + +/* + * IA-64-specific support for kernel module loader. + * + * Copyright (C) 2003 Hewlett-Packard Co + * David Mosberger-Tang + */ + +struct elf64_shdr; /* forward declration */ + +struct mod_arch_specific { + struct elf64_shdr *core_plt; /* core PLT section */ + struct elf64_shdr *init_plt; /* init PLT section */ + struct elf64_shdr *got; /* global offset table */ + struct elf64_shdr *opd; /* official procedure descriptors */ + struct elf64_shdr *unwind; /* unwind-table section */ + unsigned long gp; /* global-pointer for module */ + + void *core_unw_table; /* core unwind-table cookie returned by unwinder */ + void *init_unw_table; /* init unwind-table cookie returned by unwinder */ + unsigned int next_got_entry; /* index of next available got entry */ +}; + +#define Elf_Shdr Elf64_Shdr +#define Elf_Sym Elf64_Sym +#define Elf_Ehdr Elf64_Ehdr + +#define MODULE_PROC_FAMILY "ia64" +#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY \ + "gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__) + +#define ARCH_SHF_SMALL SHF_IA_64_SHORT + +#endif /* _ASM_IA64_MODULE_H */ diff --git a/arch/ia64/include/asm/msgbuf.h b/arch/ia64/include/asm/msgbuf.h new file mode 100644 index 000000000000..6c64c0d2aae1 --- /dev/null +++ b/arch/ia64/include/asm/msgbuf.h @@ -0,0 +1,27 @@ +#ifndef _ASM_IA64_MSGBUF_H +#define _ASM_IA64_MSGBUF_H + +/* + * The msqid64_ds structure for IA-64 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 2 miscellaneous 64-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + __kernel_time_t msg_rtime; /* last msgrcv time */ + __kernel_time_t msg_ctime; /* last change time */ + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ASM_IA64_MSGBUF_H */ diff --git a/arch/ia64/include/asm/mutex.h b/arch/ia64/include/asm/mutex.h new file mode 100644 index 000000000000..bed73a643a56 --- /dev/null +++ b/arch/ia64/include/asm/mutex.h @@ -0,0 +1,92 @@ +/* + * ia64 implementation of the mutex fastpath. + * + * Copyright (C) 2006 Ken Chen + * + */ + +#ifndef _ASM_MUTEX_H +#define _ASM_MUTEX_H + +/** + * __mutex_fastpath_lock - try to take the lock by moving the count + * from 1 to a 0 value + * @count: pointer of type atomic_t + * @fail_fn: function to call if the original value was not 1 + * + * Change the count from 1 to a value lower than 1, and call if + * it wasn't 1 originally. This function MUST leave the value lower than + * 1 even when the "1" assertion wasn't true. + */ +static inline void +__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) +{ + if (unlikely(ia64_fetchadd4_acq(count, -1) != 1)) + fail_fn(count); +} + +/** + * __mutex_fastpath_lock_retval - try to take the lock by moving the count + * from 1 to a 0 value + * @count: pointer of type atomic_t + * @fail_fn: function to call if the original value was not 1 + * + * Change the count from 1 to a value lower than 1, and call if + * it wasn't 1 originally. This function returns 0 if the fastpath succeeds, + * or anything the slow path function returns. + */ +static inline int +__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) +{ + if (unlikely(ia64_fetchadd4_acq(count, -1) != 1)) + return fail_fn(count); + return 0; +} + +/** + * __mutex_fastpath_unlock - try to promote the count from 0 to 1 + * @count: pointer of type atomic_t + * @fail_fn: function to call if the original value was not 0 + * + * Try to promote the count from 0 to 1. If it wasn't 0, call . + * In the failure case, this function is allowed to either set the value to + * 1, or to set it to a value lower than 1. + * + * If the implementation sets it to a value of lower than 1, then the + * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs + * to return 0 otherwise. + */ +static inline void +__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *)) +{ + int ret = ia64_fetchadd4_rel(count, 1); + if (unlikely(ret < 0)) + fail_fn(count); +} + +#define __mutex_slowpath_needs_to_unlock() 1 + +/** + * __mutex_fastpath_trylock - try to acquire the mutex, without waiting + * + * @count: pointer of type atomic_t + * @fail_fn: fallback function + * + * Change the count from 1 to a value lower than 1, and return 0 (failure) + * if it wasn't 1 originally, or return 1 (success) otherwise. This function + * MUST leave the value lower than 1 even when the "1" assertion wasn't true. + * Additionally, if the value was < 0 originally, this function must not leave + * it to 0 on failure. + * + * If the architecture has no effective trylock variant, it should call the + * spinlock-based trylock variant unconditionally. + */ +static inline int +__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) +{ + if (cmpxchg_acq(count, 1, 0) == 1) + return 1; + return 0; +} + +#endif diff --git a/arch/ia64/include/asm/native/inst.h b/arch/ia64/include/asm/native/inst.h new file mode 100644 index 000000000000..c8efbf7b849e --- /dev/null +++ b/arch/ia64/include/asm/native/inst.h @@ -0,0 +1,175 @@ +/****************************************************************************** + * arch/ia64/include/asm/native/inst.h + * + * Copyright (c) 2008 Isaku Yamahata + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#define DO_SAVE_MIN IA64_NATIVE_DO_SAVE_MIN + +#define __paravirt_switch_to ia64_native_switch_to +#define __paravirt_leave_syscall ia64_native_leave_syscall +#define __paravirt_work_processed_syscall ia64_native_work_processed_syscall +#define __paravirt_leave_kernel ia64_native_leave_kernel +#define __paravirt_pending_syscall_end ia64_work_pending_syscall_end +#define __paravirt_work_processed_syscall_target \ + ia64_work_processed_syscall + +#ifdef CONFIG_PARAVIRT_GUEST_ASM_CLOBBER_CHECK +# define PARAVIRT_POISON 0xdeadbeefbaadf00d +# define CLOBBER(clob) \ + ;; \ + movl clob = PARAVIRT_POISON; \ + ;; +#else +# define CLOBBER(clob) /* nothing */ +#endif + +#define MOV_FROM_IFA(reg) \ + mov reg = cr.ifa + +#define MOV_FROM_ITIR(reg) \ + mov reg = cr.itir + +#define MOV_FROM_ISR(reg) \ + mov reg = cr.isr + +#define MOV_FROM_IHA(reg) \ + mov reg = cr.iha + +#define MOV_FROM_IPSR(pred, reg) \ +(pred) mov reg = cr.ipsr + +#define MOV_FROM_IIM(reg) \ + mov reg = cr.iim + +#define MOV_FROM_IIP(reg) \ + mov reg = cr.iip + +#define MOV_FROM_IVR(reg, clob) \ + mov reg = cr.ivr \ + CLOBBER(clob) + +#define MOV_FROM_PSR(pred, reg, clob) \ +(pred) mov reg = psr \ + CLOBBER(clob) + +#define MOV_TO_IFA(reg, clob) \ + mov cr.ifa = reg \ + CLOBBER(clob) + +#define MOV_TO_ITIR(pred, reg, clob) \ +(pred) mov cr.itir = reg \ + CLOBBER(clob) + +#define MOV_TO_IHA(pred, reg, clob) \ +(pred) mov cr.iha = reg \ + CLOBBER(clob) + +#define MOV_TO_IPSR(pred, reg, clob) \ +(pred) mov cr.ipsr = reg \ + CLOBBER(clob) + +#define MOV_TO_IFS(pred, reg, clob) \ +(pred) mov cr.ifs = reg \ + CLOBBER(clob) + +#define MOV_TO_IIP(reg, clob) \ + mov cr.iip = reg \ + CLOBBER(clob) + +#define MOV_TO_KR(kr, reg, clob0, clob1) \ + mov IA64_KR(kr) = reg \ + CLOBBER(clob0) \ + CLOBBER(clob1) + +#define ITC_I(pred, reg, clob) \ +(pred) itc.i reg \ + CLOBBER(clob) + +#define ITC_D(pred, reg, clob) \ +(pred) itc.d reg \ + CLOBBER(clob) + +#define ITC_I_AND_D(pred_i, pred_d, reg, clob) \ +(pred_i) itc.i reg; \ +(pred_d) itc.d reg \ + CLOBBER(clob) + +#define THASH(pred, reg0, reg1, clob) \ +(pred) thash reg0 = reg1 \ + CLOBBER(clob) + +#define SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(clob0, clob1) \ + ssm psr.ic | PSR_DEFAULT_BITS \ + CLOBBER(clob0) \ + CLOBBER(clob1) \ + ;; \ + srlz.i /* guarantee that interruption collectin is on */ \ + ;; + +#define SSM_PSR_IC_AND_SRLZ_D(clob0, clob1) \ + ssm psr.ic \ + CLOBBER(clob0) \ + CLOBBER(clob1) \ + ;; \ + srlz.d + +#define RSM_PSR_IC(clob) \ + rsm psr.ic \ + CLOBBER(clob) + +#define SSM_PSR_I(pred, pred_clob, clob) \ +(pred) ssm psr.i \ + CLOBBER(clob) + +#define RSM_PSR_I(pred, clob0, clob1) \ +(pred) rsm psr.i \ + CLOBBER(clob0) \ + CLOBBER(clob1) + +#define RSM_PSR_I_IC(clob0, clob1, clob2) \ + rsm psr.i | psr.ic \ + CLOBBER(clob0) \ + CLOBBER(clob1) \ + CLOBBER(clob2) + +#define RSM_PSR_DT \ + rsm psr.dt + +#define SSM_PSR_DT_AND_SRLZ_I \ + ssm psr.dt \ + ;; \ + srlz.i + +#define BSW_0(clob0, clob1, clob2) \ + bsw.0 \ + CLOBBER(clob0) \ + CLOBBER(clob1) \ + CLOBBER(clob2) + +#define BSW_1(clob0, clob1) \ + bsw.1 \ + CLOBBER(clob0) \ + CLOBBER(clob1) + +#define COVER \ + cover + +#define RFI \ + rfi diff --git a/arch/ia64/include/asm/native/irq.h b/arch/ia64/include/asm/native/irq.h new file mode 100644 index 000000000000..887a228e2edb --- /dev/null +++ b/arch/ia64/include/asm/native/irq.h @@ -0,0 +1,33 @@ +/****************************************************************************** + * arch/ia64/include/asm/native/irq.h + * + * Copyright (c) 2008 Isaku Yamahata + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_IA64_NATIVE_IRQ_H +#define _ASM_IA64_NATIVE_IRQ_H + +#define NR_VECTORS 256 + +#if (NR_VECTORS + 32 * NR_CPUS) < 1024 +#define IA64_NATIVE_NR_IRQS (NR_VECTORS + 32 * NR_CPUS) +#else +#define IA64_NATIVE_NR_IRQS 1024 +#endif + +#endif /* _ASM_IA64_NATIVE_IRQ_H */ diff --git a/arch/ia64/include/asm/nodedata.h b/arch/ia64/include/asm/nodedata.h new file mode 100644 index 000000000000..2fb337b0e9b7 --- /dev/null +++ b/arch/ia64/include/asm/nodedata.h @@ -0,0 +1,63 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2000 Silicon Graphics, Inc. All rights reserved. + * Copyright (c) 2002 NEC Corp. + * Copyright (c) 2002 Erich Focht + * Copyright (c) 2002 Kimio Suganuma + */ +#ifndef _ASM_IA64_NODEDATA_H +#define _ASM_IA64_NODEDATA_H + +#include + +#include +#include + +#ifdef CONFIG_NUMA + +/* + * Node Data. One of these structures is located on each node of a NUMA system. + */ + +struct pglist_data; +struct ia64_node_data { + short active_cpu_count; + short node; + struct pglist_data *pg_data_ptrs[MAX_NUMNODES]; +}; + + +/* + * Return a pointer to the node_data structure for the executing cpu. + */ +#define local_node_data (local_cpu_data->node_data) + +/* + * Given a node id, return a pointer to the pg_data_t for the node. + * + * NODE_DATA - should be used in all code not related to system + * initialization. It uses pernode data structures to minimize + * offnode memory references. However, these structure are not + * present during boot. This macro can be used once cpu_init + * completes. + */ +#define NODE_DATA(nid) (local_node_data->pg_data_ptrs[nid]) + +/* + * LOCAL_DATA_ADDR - This is to calculate the address of other node's + * "local_node_data" at hot-plug phase. The local_node_data + * is pointed by per_cpu_page. Kernel usually use it for + * just executing cpu. However, when new node is hot-added, + * the addresses of local data for other nodes are necessary + * to update all of them. + */ +#define LOCAL_DATA_ADDR(pgdat) \ + ((struct ia64_node_data *)((u64)(pgdat) + \ + L1_CACHE_ALIGN(sizeof(struct pglist_data)))) + +#endif /* CONFIG_NUMA */ + +#endif /* _ASM_IA64_NODEDATA_H */ diff --git a/arch/ia64/include/asm/numa.h b/arch/ia64/include/asm/numa.h new file mode 100644 index 000000000000..3499ff57bf42 --- /dev/null +++ b/arch/ia64/include/asm/numa.h @@ -0,0 +1,82 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * This file contains NUMA specific prototypes and definitions. + * + * 2002/08/05 Erich Focht + * + */ +#ifndef _ASM_IA64_NUMA_H +#define _ASM_IA64_NUMA_H + + +#ifdef CONFIG_NUMA + +#include +#include +#include +#include +#include + +#include + +#define NUMA_NO_NODE -1 + +extern u16 cpu_to_node_map[NR_CPUS] __cacheline_aligned; +extern cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned; +extern pg_data_t *pgdat_list[MAX_NUMNODES]; + +/* Stuff below this line could be architecture independent */ + +extern int num_node_memblks; /* total number of memory chunks */ + +/* + * List of node memory chunks. Filled when parsing SRAT table to + * obtain information about memory nodes. +*/ + +struct node_memblk_s { + unsigned long start_paddr; + unsigned long size; + int nid; /* which logical node contains this chunk? */ + int bank; /* which mem bank on this node */ +}; + +struct node_cpuid_s { + u16 phys_id; /* id << 8 | eid */ + int nid; /* logical node containing this CPU */ +}; + +extern struct node_memblk_s node_memblk[NR_NODE_MEMBLKS]; +extern struct node_cpuid_s node_cpuid[NR_CPUS]; + +/* + * ACPI 2.0 SLIT (System Locality Information Table) + * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf + * + * This is a matrix with "distances" between nodes, they should be + * proportional to the memory access latency ratios. + */ + +extern u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES]; +#define node_distance(from,to) (numa_slit[(from) * num_online_nodes() + (to)]) + +extern int paddr_to_nid(unsigned long paddr); + +#define local_nodeid (cpu_to_node_map[smp_processor_id()]) + +extern void map_cpu_to_node(int cpu, int nid); +extern void unmap_cpu_from_node(int cpu, int nid); + + +#else /* !CONFIG_NUMA */ +#define map_cpu_to_node(cpu, nid) do{}while(0) +#define unmap_cpu_from_node(cpu, nid) do{}while(0) + +#define paddr_to_nid(addr) 0 + +#endif /* CONFIG_NUMA */ + +#endif /* _ASM_IA64_NUMA_H */ diff --git a/arch/ia64/include/asm/page.h b/arch/ia64/include/asm/page.h new file mode 100644 index 000000000000..5f271bc712ee --- /dev/null +++ b/arch/ia64/include/asm/page.h @@ -0,0 +1,223 @@ +#ifndef _ASM_IA64_PAGE_H +#define _ASM_IA64_PAGE_H +/* + * Pagetable related stuff. + * + * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co + * David Mosberger-Tang + */ + +#include +#include + +/* + * The top three bits of an IA64 address are its Region Number. + * Different regions are assigned to different purposes. + */ +#define RGN_SHIFT (61) +#define RGN_BASE(r) (__IA64_UL_CONST(r)<> PAGE_SHIFT) + +#ifdef CONFIG_VIRTUAL_MEM_MAP +extern int ia64_pfn_valid (unsigned long pfn); +#else +# define ia64_pfn_valid(pfn) 1 +#endif + +#ifdef CONFIG_VIRTUAL_MEM_MAP +extern struct page *vmem_map; +#ifdef CONFIG_DISCONTIGMEM +# define page_to_pfn(page) ((unsigned long) (page - vmem_map)) +# define pfn_to_page(pfn) (vmem_map + (pfn)) +#else +# include +#endif +#else +# include +#endif + +#ifdef CONFIG_FLATMEM +# define pfn_valid(pfn) (((pfn) < max_mapnr) && ia64_pfn_valid(pfn)) +#elif defined(CONFIG_DISCONTIGMEM) +extern unsigned long min_low_pfn; +extern unsigned long max_low_pfn; +# define pfn_valid(pfn) (((pfn) >= min_low_pfn) && ((pfn) < max_low_pfn) && ia64_pfn_valid(pfn)) +#endif + +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) + +typedef union ia64_va { + struct { + unsigned long off : 61; /* intra-region offset */ + unsigned long reg : 3; /* region number */ + } f; + unsigned long l; + void *p; +} ia64_va; + +/* + * Note: These macros depend on the fact that PAGE_OFFSET has all + * region bits set to 1 and all other bits set to zero. They are + * expressed in this way to ensure they result in a single "dep" + * instruction. + */ +#define __pa(x) ({ia64_va _v; _v.l = (long) (x); _v.f.reg = 0; _v.l;}) +#define __va(x) ({ia64_va _v; _v.l = (long) (x); _v.f.reg = -1; _v.p;}) + +#define REGION_NUMBER(x) ({ia64_va _v; _v.l = (long) (x); _v.f.reg;}) +#define REGION_OFFSET(x) ({ia64_va _v; _v.l = (long) (x); _v.f.off;}) + +#ifdef CONFIG_HUGETLB_PAGE +# define htlbpage_to_page(x) (((unsigned long) REGION_NUMBER(x) << 61) \ + | (REGION_OFFSET(x) >> (HPAGE_SHIFT-PAGE_SHIFT))) +# define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) +extern unsigned int hpage_shift; +#endif + +static __inline__ int +get_order (unsigned long size) +{ + long double d = size - 1; + long order; + + order = ia64_getf_exp(d); + order = order - PAGE_SHIFT - 0xffff + 1; + if (order < 0) + order = 0; + return order; +} + +#endif /* !__ASSEMBLY__ */ + +#ifdef STRICT_MM_TYPECHECKS + /* + * These are used to make use of C type-checking.. + */ + typedef struct { unsigned long pte; } pte_t; + typedef struct { unsigned long pmd; } pmd_t; +#ifdef CONFIG_PGTABLE_4 + typedef struct { unsigned long pud; } pud_t; +#endif + typedef struct { unsigned long pgd; } pgd_t; + typedef struct { unsigned long pgprot; } pgprot_t; + typedef struct page *pgtable_t; + +# define pte_val(x) ((x).pte) +# define pmd_val(x) ((x).pmd) +#ifdef CONFIG_PGTABLE_4 +# define pud_val(x) ((x).pud) +#endif +# define pgd_val(x) ((x).pgd) +# define pgprot_val(x) ((x).pgprot) + +# define __pte(x) ((pte_t) { (x) } ) +# define __pgprot(x) ((pgprot_t) { (x) } ) + +#else /* !STRICT_MM_TYPECHECKS */ + /* + * .. while these make it easier on the compiler + */ +# ifndef __ASSEMBLY__ + typedef unsigned long pte_t; + typedef unsigned long pmd_t; + typedef unsigned long pgd_t; + typedef unsigned long pgprot_t; + typedef struct page *pgtable_t; +# endif + +# define pte_val(x) (x) +# define pmd_val(x) (x) +# define pgd_val(x) (x) +# define pgprot_val(x) (x) + +# define __pte(x) (x) +# define __pgd(x) (x) +# define __pgprot(x) (x) +#endif /* !STRICT_MM_TYPECHECKS */ + +#define PAGE_OFFSET RGN_BASE(RGN_KERNEL) + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC | \ + (((current->personality & READ_IMPLIES_EXEC) != 0) \ + ? VM_EXEC : 0)) + +#endif /* _ASM_IA64_PAGE_H */ diff --git a/arch/ia64/include/asm/pal.h b/arch/ia64/include/asm/pal.h new file mode 100644 index 000000000000..67b02901ead4 --- /dev/null +++ b/arch/ia64/include/asm/pal.h @@ -0,0 +1,1827 @@ +#ifndef _ASM_IA64_PAL_H +#define _ASM_IA64_PAL_H + +/* + * Processor Abstraction Layer definitions. + * + * This is based on Intel IA-64 Architecture Software Developer's Manual rev 1.0 + * chapter 11 IA-64 Processor Abstraction Layer + * + * Copyright (C) 1998-2001 Hewlett-Packard Co + * David Mosberger-Tang + * Stephane Eranian + * Copyright (C) 1999 VA Linux Systems + * Copyright (C) 1999 Walt Drummond + * Copyright (C) 1999 Srinivasa Prasad Thirumalachar + * Copyright (C) 2008 Silicon Graphics, Inc. (SGI) + * + * 99/10/01 davidm Make sure we pass zero for reserved parameters. + * 00/03/07 davidm Updated pal_cache_flush() to be in sync with PAL v2.6. + * 00/03/23 cfleck Modified processor min-state save area to match updated PAL & SAL info + * 00/05/24 eranian Updated to latest PAL spec, fix structures bugs, added + * 00/05/25 eranian Support for stack calls, and static physical calls + * 00/06/18 eranian Support for stacked physical calls + * 06/10/26 rja Support for Intel Itanium Architecture Software Developer's + * Manual Rev 2.2 (Jan 2006) + */ + +/* + * Note that some of these calls use a static-register only calling + * convention which has nothing to do with the regular calling + * convention. + */ +#define PAL_CACHE_FLUSH 1 /* flush i/d cache */ +#define PAL_CACHE_INFO 2 /* get detailed i/d cache info */ +#define PAL_CACHE_INIT 3 /* initialize i/d cache */ +#define PAL_CACHE_SUMMARY 4 /* get summary of cache hierarchy */ +#define PAL_MEM_ATTRIB 5 /* list supported memory attributes */ +#define PAL_PTCE_INFO 6 /* purge TLB info */ +#define PAL_VM_INFO 7 /* return supported virtual memory features */ +#define PAL_VM_SUMMARY 8 /* return summary on supported vm features */ +#define PAL_BUS_GET_FEATURES 9 /* return processor bus interface features settings */ +#define PAL_BUS_SET_FEATURES 10 /* set processor bus features */ +#define PAL_DEBUG_INFO 11 /* get number of debug registers */ +#define PAL_FIXED_ADDR 12 /* get fixed component of processors's directed address */ +#define PAL_FREQ_BASE 13 /* base frequency of the platform */ +#define PAL_FREQ_RATIOS 14 /* ratio of processor, bus and ITC frequency */ +#define PAL_PERF_MON_INFO 15 /* return performance monitor info */ +#define PAL_PLATFORM_ADDR 16 /* set processor interrupt block and IO port space addr */ +#define PAL_PROC_GET_FEATURES 17 /* get configurable processor features & settings */ +#define PAL_PROC_SET_FEATURES 18 /* enable/disable configurable processor features */ +#define PAL_RSE_INFO 19 /* return rse information */ +#define PAL_VERSION 20 /* return version of PAL code */ +#define PAL_MC_CLEAR_LOG 21 /* clear all processor log info */ +#define PAL_MC_DRAIN 22 /* drain operations which could result in an MCA */ +#define PAL_MC_EXPECTED 23 /* set/reset expected MCA indicator */ +#define PAL_MC_DYNAMIC_STATE 24 /* get processor dynamic state */ +#define PAL_MC_ERROR_INFO 25 /* get processor MCA info and static state */ +#define PAL_MC_RESUME 26 /* Return to interrupted process */ +#define PAL_MC_REGISTER_MEM 27 /* Register memory for PAL to use during MCAs and inits */ +#define PAL_HALT 28 /* enter the low power HALT state */ +#define PAL_HALT_LIGHT 29 /* enter the low power light halt state*/ +#define PAL_COPY_INFO 30 /* returns info needed to relocate PAL */ +#define PAL_CACHE_LINE_INIT 31 /* init tags & data of cache line */ +#define PAL_PMI_ENTRYPOINT 32 /* register PMI memory entry points with the processor */ +#define PAL_ENTER_IA_32_ENV 33 /* enter IA-32 system environment */ +#define PAL_VM_PAGE_SIZE 34 /* return vm TC and page walker page sizes */ + +#define PAL_MEM_FOR_TEST 37 /* get amount of memory needed for late processor test */ +#define PAL_CACHE_PROT_INFO 38 /* get i/d cache protection info */ +#define PAL_REGISTER_INFO 39 /* return AR and CR register information*/ +#define PAL_SHUTDOWN 40 /* enter processor shutdown state */ +#define PAL_PREFETCH_VISIBILITY 41 /* Make Processor Prefetches Visible */ +#define PAL_LOGICAL_TO_PHYSICAL 42 /* returns information on logical to physical processor mapping */ +#define PAL_CACHE_SHARED_INFO 43 /* returns information on caches shared by logical processor */ +#define PAL_GET_HW_POLICY 48 /* Get current hardware resource sharing policy */ +#define PAL_SET_HW_POLICY 49 /* Set current hardware resource sharing policy */ +#define PAL_VP_INFO 50 /* Information about virtual processor features */ +#define PAL_MC_HW_TRACKING 51 /* Hardware tracking status */ + +#define PAL_COPY_PAL 256 /* relocate PAL procedures and PAL PMI */ +#define PAL_HALT_INFO 257 /* return the low power capabilities of processor */ +#define PAL_TEST_PROC 258 /* perform late processor self-test */ +#define PAL_CACHE_READ 259 /* read tag & data of cacheline for diagnostic testing */ +#define PAL_CACHE_WRITE 260 /* write tag & data of cacheline for diagnostic testing */ +#define PAL_VM_TR_READ 261 /* read contents of translation register */ +#define PAL_GET_PSTATE 262 /* get the current P-state */ +#define PAL_SET_PSTATE 263 /* set the P-state */ +#define PAL_BRAND_INFO 274 /* Processor branding information */ + +#define PAL_GET_PSTATE_TYPE_LASTSET 0 +#define PAL_GET_PSTATE_TYPE_AVGANDRESET 1 +#define PAL_GET_PSTATE_TYPE_AVGNORESET 2 +#define PAL_GET_PSTATE_TYPE_INSTANT 3 + +#define PAL_MC_ERROR_INJECT 276 /* Injects processor error or returns injection capabilities */ + +#ifndef __ASSEMBLY__ + +#include +#include + +/* + * Data types needed to pass information into PAL procedures and + * interpret information returned by them. + */ + +/* Return status from the PAL procedure */ +typedef s64 pal_status_t; + +#define PAL_STATUS_SUCCESS 0 /* No error */ +#define PAL_STATUS_UNIMPLEMENTED (-1) /* Unimplemented procedure */ +#define PAL_STATUS_EINVAL (-2) /* Invalid argument */ +#define PAL_STATUS_ERROR (-3) /* Error */ +#define PAL_STATUS_CACHE_INIT_FAIL (-4) /* Could not initialize the + * specified level and type of + * cache without sideeffects + * and "restrict" was 1 + */ +#define PAL_STATUS_REQUIRES_MEMORY (-9) /* Call requires PAL memory buffer */ + +/* Processor cache level in the hierarchy */ +typedef u64 pal_cache_level_t; +#define PAL_CACHE_LEVEL_L0 0 /* L0 */ +#define PAL_CACHE_LEVEL_L1 1 /* L1 */ +#define PAL_CACHE_LEVEL_L2 2 /* L2 */ + + +/* Processor cache type at a particular level in the hierarchy */ + +typedef u64 pal_cache_type_t; +#define PAL_CACHE_TYPE_INSTRUCTION 1 /* Instruction cache */ +#define PAL_CACHE_TYPE_DATA 2 /* Data or unified cache */ +#define PAL_CACHE_TYPE_INSTRUCTION_DATA 3 /* Both Data & Instruction */ + + +#define PAL_CACHE_FLUSH_INVALIDATE 1 /* Invalidate clean lines */ +#define PAL_CACHE_FLUSH_CHK_INTRS 2 /* check for interrupts/mc while flushing */ + +/* Processor cache line size in bytes */ +typedef int pal_cache_line_size_t; + +/* Processor cache line state */ +typedef u64 pal_cache_line_state_t; +#define PAL_CACHE_LINE_STATE_INVALID 0 /* Invalid */ +#define PAL_CACHE_LINE_STATE_SHARED 1 /* Shared */ +#define PAL_CACHE_LINE_STATE_EXCLUSIVE 2 /* Exclusive */ +#define PAL_CACHE_LINE_STATE_MODIFIED 3 /* Modified */ + +typedef struct pal_freq_ratio { + u32 den, num; /* numerator & denominator */ +} itc_ratio, proc_ratio; + +typedef union pal_cache_config_info_1_s { + struct { + u64 u : 1, /* 0 Unified cache ? */ + at : 2, /* 2-1 Cache mem attr*/ + reserved : 5, /* 7-3 Reserved */ + associativity : 8, /* 16-8 Associativity*/ + line_size : 8, /* 23-17 Line size */ + stride : 8, /* 31-24 Stride */ + store_latency : 8, /*39-32 Store latency*/ + load_latency : 8, /* 47-40 Load latency*/ + store_hints : 8, /* 55-48 Store hints*/ + load_hints : 8; /* 63-56 Load hints */ + } pcci1_bits; + u64 pcci1_data; +} pal_cache_config_info_1_t; + +typedef union pal_cache_config_info_2_s { + struct { + u32 cache_size; /*cache size in bytes*/ + + + u32 alias_boundary : 8, /* 39-32 aliased addr + * separation for max + * performance. + */ + tag_ls_bit : 8, /* 47-40 LSb of addr*/ + tag_ms_bit : 8, /* 55-48 MSb of addr*/ + reserved : 8; /* 63-56 Reserved */ + } pcci2_bits; + u64 pcci2_data; +} pal_cache_config_info_2_t; + + +typedef struct pal_cache_config_info_s { + pal_status_t pcci_status; + pal_cache_config_info_1_t pcci_info_1; + pal_cache_config_info_2_t pcci_info_2; + u64 pcci_reserved; +} pal_cache_config_info_t; + +#define pcci_ld_hints pcci_info_1.pcci1_bits.load_hints +#define pcci_st_hints pcci_info_1.pcci1_bits.store_hints +#define pcci_ld_latency pcci_info_1.pcci1_bits.load_latency +#define pcci_st_latency pcci_info_1.pcci1_bits.store_latency +#define pcci_stride pcci_info_1.pcci1_bits.stride +#define pcci_line_size pcci_info_1.pcci1_bits.line_size +#define pcci_assoc pcci_info_1.pcci1_bits.associativity +#define pcci_cache_attr pcci_info_1.pcci1_bits.at +#define pcci_unified pcci_info_1.pcci1_bits.u +#define pcci_tag_msb pcci_info_2.pcci2_bits.tag_ms_bit +#define pcci_tag_lsb pcci_info_2.pcci2_bits.tag_ls_bit +#define pcci_alias_boundary pcci_info_2.pcci2_bits.alias_boundary +#define pcci_cache_size pcci_info_2.pcci2_bits.cache_size + + + +/* Possible values for cache attributes */ + +#define PAL_CACHE_ATTR_WT 0 /* Write through cache */ +#define PAL_CACHE_ATTR_WB 1 /* Write back cache */ +#define PAL_CACHE_ATTR_WT_OR_WB 2 /* Either write thru or write + * back depending on TLB + * memory attributes + */ + + +/* Possible values for cache hints */ + +#define PAL_CACHE_HINT_TEMP_1 0 /* Temporal level 1 */ +#define PAL_CACHE_HINT_NTEMP_1 1 /* Non-temporal level 1 */ +#define PAL_CACHE_HINT_NTEMP_ALL 3 /* Non-temporal all levels */ + +/* Processor cache protection information */ +typedef union pal_cache_protection_element_u { + u32 pcpi_data; + struct { + u32 data_bits : 8, /* # data bits covered by + * each unit of protection + */ + + tagprot_lsb : 6, /* Least -do- */ + tagprot_msb : 6, /* Most Sig. tag address + * bit that this + * protection covers. + */ + prot_bits : 6, /* # of protection bits */ + method : 4, /* Protection method */ + t_d : 2; /* Indicates which part + * of the cache this + * protection encoding + * applies. + */ + } pcp_info; +} pal_cache_protection_element_t; + +#define pcpi_cache_prot_part pcp_info.t_d +#define pcpi_prot_method pcp_info.method +#define pcpi_prot_bits pcp_info.prot_bits +#define pcpi_tagprot_msb pcp_info.tagprot_msb +#define pcpi_tagprot_lsb pcp_info.tagprot_lsb +#define pcpi_data_bits pcp_info.data_bits + +/* Processor cache part encodings */ +#define PAL_CACHE_PROT_PART_DATA 0 /* Data protection */ +#define PAL_CACHE_PROT_PART_TAG 1 /* Tag protection */ +#define PAL_CACHE_PROT_PART_TAG_DATA 2 /* Tag+data protection (tag is + * more significant ) + */ +#define PAL_CACHE_PROT_PART_DATA_TAG 3 /* Data+tag protection (data is + * more significant ) + */ +#define PAL_CACHE_PROT_PART_MAX 6 + + +typedef struct pal_cache_protection_info_s { + pal_status_t pcpi_status; + pal_cache_protection_element_t pcp_info[PAL_CACHE_PROT_PART_MAX]; +} pal_cache_protection_info_t; + + +/* Processor cache protection method encodings */ +#define PAL_CACHE_PROT_METHOD_NONE 0 /* No protection */ +#define PAL_CACHE_PROT_METHOD_ODD_PARITY 1 /* Odd parity */ +#define PAL_CACHE_PROT_METHOD_EVEN_PARITY 2 /* Even parity */ +#define PAL_CACHE_PROT_METHOD_ECC 3 /* ECC protection */ + + +/* Processor cache line identification in the hierarchy */ +typedef union pal_cache_line_id_u { + u64 pclid_data; + struct { + u64 cache_type : 8, /* 7-0 cache type */ + level : 8, /* 15-8 level of the + * cache in the + * hierarchy. + */ + way : 8, /* 23-16 way in the set + */ + part : 8, /* 31-24 part of the + * cache + */ + reserved : 32; /* 63-32 is reserved*/ + } pclid_info_read; + struct { + u64 cache_type : 8, /* 7-0 cache type */ + level : 8, /* 15-8 level of the + * cache in the + * hierarchy. + */ + way : 8, /* 23-16 way in the set + */ + part : 8, /* 31-24 part of the + * cache + */ + mesi : 8, /* 39-32 cache line + * state + */ + start : 8, /* 47-40 lsb of data to + * invert + */ + length : 8, /* 55-48 #bits to + * invert + */ + trigger : 8; /* 63-56 Trigger error + * by doing a load + * after the write + */ + + } pclid_info_write; +} pal_cache_line_id_u_t; + +#define pclid_read_part pclid_info_read.part +#define pclid_read_way pclid_info_read.way +#define pclid_read_level pclid_info_read.level +#define pclid_read_cache_type pclid_info_read.cache_type + +#define pclid_write_trigger pclid_info_write.trigger +#define pclid_write_length pclid_info_write.length +#define pclid_write_start pclid_info_write.start +#define pclid_write_mesi pclid_info_write.mesi +#define pclid_write_part pclid_info_write.part +#define pclid_write_way pclid_info_write.way +#define pclid_write_level pclid_info_write.level +#define pclid_write_cache_type pclid_info_write.cache_type + +/* Processor cache line part encodings */ +#define PAL_CACHE_LINE_ID_PART_DATA 0 /* Data */ +#define PAL_CACHE_LINE_ID_PART_TAG 1 /* Tag */ +#define PAL_CACHE_LINE_ID_PART_DATA_PROT 2 /* Data protection */ +#define PAL_CACHE_LINE_ID_PART_TAG_PROT 3 /* Tag protection */ +#define PAL_CACHE_LINE_ID_PART_DATA_TAG_PROT 4 /* Data+tag + * protection + */ +typedef struct pal_cache_line_info_s { + pal_status_t pcli_status; /* Return status of the read cache line + * info call. + */ + u64 pcli_data; /* 64-bit data, tag, protection bits .. */ + u64 pcli_data_len; /* data length in bits */ + pal_cache_line_state_t pcli_cache_line_state; /* mesi state */ + +} pal_cache_line_info_t; + + +/* Machine Check related crap */ + +/* Pending event status bits */ +typedef u64 pal_mc_pending_events_t; + +#define PAL_MC_PENDING_MCA (1 << 0) +#define PAL_MC_PENDING_INIT (1 << 1) + +/* Error information type */ +typedef u64 pal_mc_info_index_t; + +#define PAL_MC_INFO_PROCESSOR 0 /* Processor */ +#define PAL_MC_INFO_CACHE_CHECK 1 /* Cache check */ +#define PAL_MC_INFO_TLB_CHECK 2 /* Tlb check */ +#define PAL_MC_INFO_BUS_CHECK 3 /* Bus check */ +#define PAL_MC_INFO_REQ_ADDR 4 /* Requestor address */ +#define PAL_MC_INFO_RESP_ADDR 5 /* Responder address */ +#define PAL_MC_INFO_TARGET_ADDR 6 /* Target address */ +#define PAL_MC_INFO_IMPL_DEP 7 /* Implementation + * dependent + */ + +#define PAL_TLB_CHECK_OP_PURGE 8 + +typedef struct pal_process_state_info_s { + u64 reserved1 : 2, + rz : 1, /* PAL_CHECK processor + * rendezvous + * successful. + */ + + ra : 1, /* PAL_CHECK attempted + * a rendezvous. + */ + me : 1, /* Distinct multiple + * errors occurred + */ + + mn : 1, /* Min. state save + * area has been + * registered with PAL + */ + + sy : 1, /* Storage integrity + * synched + */ + + + co : 1, /* Continuable */ + ci : 1, /* MC isolated */ + us : 1, /* Uncontained storage + * damage. + */ + + + hd : 1, /* Non-essential hw + * lost (no loss of + * functionality) + * causing the + * processor to run in + * degraded mode. + */ + + tl : 1, /* 1 => MC occurred + * after an instr was + * executed but before + * the trap that + * resulted from instr + * execution was + * generated. + * (Trap Lost ) + */ + mi : 1, /* More information available + * call PAL_MC_ERROR_INFO + */ + pi : 1, /* Precise instruction pointer */ + pm : 1, /* Precise min-state save area */ + + dy : 1, /* Processor dynamic + * state valid + */ + + + in : 1, /* 0 = MC, 1 = INIT */ + rs : 1, /* RSE valid */ + cm : 1, /* MC corrected */ + ex : 1, /* MC is expected */ + cr : 1, /* Control regs valid*/ + pc : 1, /* Perf cntrs valid */ + dr : 1, /* Debug regs valid */ + tr : 1, /* Translation regs + * valid + */ + rr : 1, /* Region regs valid */ + ar : 1, /* App regs valid */ + br : 1, /* Branch regs valid */ + pr : 1, /* Predicate registers + * valid + */ + + fp : 1, /* fp registers valid*/ + b1 : 1, /* Preserved bank one + * general registers + * are valid + */ + b0 : 1, /* Preserved bank zero + * general registers + * are valid + */ + gr : 1, /* General registers + * are valid + * (excl. banked regs) + */ + dsize : 16, /* size of dynamic + * state returned + * by the processor + */ + + se : 1, /* Shared error. MCA in a + shared structure */ + reserved2 : 10, + cc : 1, /* Cache check */ + tc : 1, /* TLB check */ + bc : 1, /* Bus check */ + rc : 1, /* Register file check */ + uc : 1; /* Uarch check */ + +} pal_processor_state_info_t; + +typedef struct pal_cache_check_info_s { + u64 op : 4, /* Type of cache + * operation that + * caused the machine + * check. + */ + level : 2, /* Cache level */ + reserved1 : 2, + dl : 1, /* Failure in data part + * of cache line + */ + tl : 1, /* Failure in tag part + * of cache line + */ + dc : 1, /* Failure in dcache */ + ic : 1, /* Failure in icache */ + mesi : 3, /* Cache line state */ + mv : 1, /* mesi valid */ + way : 5, /* Way in which the + * error occurred + */ + wiv : 1, /* Way field valid */ + reserved2 : 1, + dp : 1, /* Data poisoned on MBE */ + reserved3 : 6, + hlth : 2, /* Health indicator */ + + index : 20, /* Cache line index */ + reserved4 : 2, + + is : 1, /* instruction set (1 == ia32) */ + iv : 1, /* instruction set field valid */ + pl : 2, /* privilege level */ + pv : 1, /* privilege level field valid */ + mcc : 1, /* Machine check corrected */ + tv : 1, /* Target address + * structure is valid + */ + rq : 1, /* Requester identifier + * structure is valid + */ + rp : 1, /* Responder identifier + * structure is valid + */ + pi : 1; /* Precise instruction pointer + * structure is valid + */ +} pal_cache_check_info_t; + +typedef struct pal_tlb_check_info_s { + + u64 tr_slot : 8, /* Slot# of TR where + * error occurred + */ + trv : 1, /* tr_slot field is valid */ + reserved1 : 1, + level : 2, /* TLB level where failure occurred */ + reserved2 : 4, + dtr : 1, /* Fail in data TR */ + itr : 1, /* Fail in inst TR */ + dtc : 1, /* Fail in data TC */ + itc : 1, /* Fail in inst. TC */ + op : 4, /* Cache operation */ + reserved3 : 6, + hlth : 2, /* Health indicator */ + reserved4 : 22, + + is : 1, /* instruction set (1 == ia32) */ + iv : 1, /* instruction set field valid */ + pl : 2, /* privilege level */ + pv : 1, /* privilege level field valid */ + mcc : 1, /* Machine check corrected */ + tv : 1, /* Target address + * structure is valid + */ + rq : 1, /* Requester identifier + * structure is valid + */ + rp : 1, /* Responder identifier + * structure is valid + */ + pi : 1; /* Precise instruction pointer + * structure is valid + */ +} pal_tlb_check_info_t; + +typedef struct pal_bus_check_info_s { + u64 size : 5, /* Xaction size */ + ib : 1, /* Internal bus error */ + eb : 1, /* External bus error */ + cc : 1, /* Error occurred + * during cache-cache + * transfer. + */ + type : 8, /* Bus xaction type*/ + sev : 5, /* Bus error severity*/ + hier : 2, /* Bus hierarchy level */ + dp : 1, /* Data poisoned on MBE */ + bsi : 8, /* Bus error status + * info + */ + reserved2 : 22, + + is : 1, /* instruction set (1 == ia32) */ + iv : 1, /* instruction set field valid */ + pl : 2, /* privilege level */ + pv : 1, /* privilege level field valid */ + mcc : 1, /* Machine check corrected */ + tv : 1, /* Target address + * structure is valid + */ + rq : 1, /* Requester identifier + * structure is valid + */ + rp : 1, /* Responder identifier + * structure is valid + */ + pi : 1; /* Precise instruction pointer + * structure is valid + */ +} pal_bus_check_info_t; + +typedef struct pal_reg_file_check_info_s { + u64 id : 4, /* Register file identifier */ + op : 4, /* Type of register + * operation that + * caused the machine + * check. + */ + reg_num : 7, /* Register number */ + rnv : 1, /* reg_num valid */ + reserved2 : 38, + + is : 1, /* instruction set (1 == ia32) */ + iv : 1, /* instruction set field valid */ + pl : 2, /* privilege level */ + pv : 1, /* privilege level field valid */ + mcc : 1, /* Machine check corrected */ + reserved3 : 3, + pi : 1; /* Precise instruction pointer + * structure is valid + */ +} pal_reg_file_check_info_t; + +typedef struct pal_uarch_check_info_s { + u64 sid : 5, /* Structure identification */ + level : 3, /* Level of failure */ + array_id : 4, /* Array identification */ + op : 4, /* Type of + * operation that + * caused the machine + * check. + */ + way : 6, /* Way of structure */ + wv : 1, /* way valid */ + xv : 1, /* index valid */ + reserved1 : 6, + hlth : 2, /* Health indicator */ + index : 8, /* Index or set of the uarch + * structure that failed. + */ + reserved2 : 24, + + is : 1, /* instruction set (1 == ia32) */ + iv : 1, /* instruction set field valid */ + pl : 2, /* privilege level */ + pv : 1, /* privilege level field valid */ + mcc : 1, /* Machine check corrected */ + tv : 1, /* Target address + * structure is valid + */ + rq : 1, /* Requester identifier + * structure is valid + */ + rp : 1, /* Responder identifier + * structure is valid + */ + pi : 1; /* Precise instruction pointer + * structure is valid + */ +} pal_uarch_check_info_t; + +typedef union pal_mc_error_info_u { + u64 pmei_data; + pal_processor_state_info_t pme_processor; + pal_cache_check_info_t pme_cache; + pal_tlb_check_info_t pme_tlb; + pal_bus_check_info_t pme_bus; + pal_reg_file_check_info_t pme_reg_file; + pal_uarch_check_info_t pme_uarch; +} pal_mc_error_info_t; + +#define pmci_proc_unknown_check pme_processor.uc +#define pmci_proc_bus_check pme_processor.bc +#define pmci_proc_tlb_check pme_processor.tc +#define pmci_proc_cache_check pme_processor.cc +#define pmci_proc_dynamic_state_size pme_processor.dsize +#define pmci_proc_gpr_valid pme_processor.gr +#define pmci_proc_preserved_bank0_gpr_valid pme_processor.b0 +#define pmci_proc_preserved_bank1_gpr_valid pme_processor.b1 +#define pmci_proc_fp_valid pme_processor.fp +#define pmci_proc_predicate_regs_valid pme_processor.pr +#define pmci_proc_branch_regs_valid pme_processor.br +#define pmci_proc_app_regs_valid pme_processor.ar +#define pmci_proc_region_regs_valid pme_processor.rr +#define pmci_proc_translation_regs_valid pme_processor.tr +#define pmci_proc_debug_regs_valid pme_processor.dr +#define pmci_proc_perf_counters_valid pme_processor.pc +#define pmci_proc_control_regs_valid pme_processor.cr +#define pmci_proc_machine_check_expected pme_processor.ex +#define pmci_proc_machine_check_corrected pme_processor.cm +#define pmci_proc_rse_valid pme_processor.rs +#define pmci_proc_machine_check_or_init pme_processor.in +#define pmci_proc_dynamic_state_valid pme_processor.dy +#define pmci_proc_operation pme_processor.op +#define pmci_proc_trap_lost pme_processor.tl +#define pmci_proc_hardware_damage pme_processor.hd +#define pmci_proc_uncontained_storage_damage pme_processor.us +#define pmci_proc_machine_check_isolated pme_processor.ci +#define pmci_proc_continuable pme_processor.co +#define pmci_proc_storage_intergrity_synced pme_processor.sy +#define pmci_proc_min_state_save_area_regd pme_processor.mn +#define pmci_proc_distinct_multiple_errors pme_processor.me +#define pmci_proc_pal_attempted_rendezvous pme_processor.ra +#define pmci_proc_pal_rendezvous_complete pme_processor.rz + + +#define pmci_cache_level pme_cache.level +#define pmci_cache_line_state pme_cache.mesi +#define pmci_cache_line_state_valid pme_cache.mv +#define pmci_cache_line_index pme_cache.index +#define pmci_cache_instr_cache_fail pme_cache.ic +#define pmci_cache_data_cache_fail pme_cache.dc +#define pmci_cache_line_tag_fail pme_cache.tl +#define pmci_cache_line_data_fail pme_cache.dl +#define pmci_cache_operation pme_cache.op +#define pmci_cache_way_valid pme_cache.wv +#define pmci_cache_target_address_valid pme_cache.tv +#define pmci_cache_way pme_cache.way +#define pmci_cache_mc pme_cache.mc + +#define pmci_tlb_instr_translation_cache_fail pme_tlb.itc +#define pmci_tlb_data_translation_cache_fail pme_tlb.dtc +#define pmci_tlb_instr_translation_reg_fail pme_tlb.itr +#define pmci_tlb_data_translation_reg_fail pme_tlb.dtr +#define pmci_tlb_translation_reg_slot pme_tlb.tr_slot +#define pmci_tlb_mc pme_tlb.mc + +#define pmci_bus_status_info pme_bus.bsi +#define pmci_bus_req_address_valid pme_bus.rq +#define pmci_bus_resp_address_valid pme_bus.rp +#define pmci_bus_target_address_valid pme_bus.tv +#define pmci_bus_error_severity pme_bus.sev +#define pmci_bus_transaction_type pme_bus.type +#define pmci_bus_cache_cache_transfer pme_bus.cc +#define pmci_bus_transaction_size pme_bus.size +#define pmci_bus_internal_error pme_bus.ib +#define pmci_bus_external_error pme_bus.eb +#define pmci_bus_mc pme_bus.mc + +/* + * NOTE: this min_state_save area struct only includes the 1KB + * architectural state save area. The other 3 KB is scratch space + * for PAL. + */ + +typedef struct pal_min_state_area_s { + u64 pmsa_nat_bits; /* nat bits for saved GRs */ + u64 pmsa_gr[15]; /* GR1 - GR15 */ + u64 pmsa_bank0_gr[16]; /* GR16 - GR31 */ + u64 pmsa_bank1_gr[16]; /* GR16 - GR31 */ + u64 pmsa_pr; /* predicate registers */ + u64 pmsa_br0; /* branch register 0 */ + u64 pmsa_rsc; /* ar.rsc */ + u64 pmsa_iip; /* cr.iip */ + u64 pmsa_ipsr; /* cr.ipsr */ + u64 pmsa_ifs; /* cr.ifs */ + u64 pmsa_xip; /* previous iip */ + u64 pmsa_xpsr; /* previous psr */ + u64 pmsa_xfs; /* previous ifs */ + u64 pmsa_br1; /* branch register 1 */ + u64 pmsa_reserved[70]; /* pal_min_state_area should total to 1KB */ +} pal_min_state_area_t; + + +struct ia64_pal_retval { + /* + * A zero status value indicates call completed without error. + * A negative status value indicates reason of call failure. + * A positive status value indicates success but an + * informational value should be printed (e.g., "reboot for + * change to take effect"). + */ + s64 status; + u64 v0; + u64 v1; + u64 v2; +}; + +/* + * Note: Currently unused PAL arguments are generally labeled + * "reserved" so the value specified in the PAL documentation + * (generally 0) MUST be passed. Reserved parameters are not optional + * parameters. + */ +extern struct ia64_pal_retval ia64_pal_call_static (u64, u64, u64, u64); +extern struct ia64_pal_retval ia64_pal_call_stacked (u64, u64, u64, u64); +extern struct ia64_pal_retval ia64_pal_call_phys_static (u64, u64, u64, u64); +extern struct ia64_pal_retval ia64_pal_call_phys_stacked (u64, u64, u64, u64); +extern void ia64_save_scratch_fpregs (struct ia64_fpreg *); +extern void ia64_load_scratch_fpregs (struct ia64_fpreg *); + +#define PAL_CALL(iprv,a0,a1,a2,a3) do { \ + struct ia64_fpreg fr[6]; \ + ia64_save_scratch_fpregs(fr); \ + iprv = ia64_pal_call_static(a0, a1, a2, a3); \ + ia64_load_scratch_fpregs(fr); \ +} while (0) + +#define PAL_CALL_STK(iprv,a0,a1,a2,a3) do { \ + struct ia64_fpreg fr[6]; \ + ia64_save_scratch_fpregs(fr); \ + iprv = ia64_pal_call_stacked(a0, a1, a2, a3); \ + ia64_load_scratch_fpregs(fr); \ +} while (0) + +#define PAL_CALL_PHYS(iprv,a0,a1,a2,a3) do { \ + struct ia64_fpreg fr[6]; \ + ia64_save_scratch_fpregs(fr); \ + iprv = ia64_pal_call_phys_static(a0, a1, a2, a3); \ + ia64_load_scratch_fpregs(fr); \ +} while (0) + +#define PAL_CALL_PHYS_STK(iprv,a0,a1,a2,a3) do { \ + struct ia64_fpreg fr[6]; \ + ia64_save_scratch_fpregs(fr); \ + iprv = ia64_pal_call_phys_stacked(a0, a1, a2, a3); \ + ia64_load_scratch_fpregs(fr); \ +} while (0) + +typedef int (*ia64_pal_handler) (u64, ...); +extern ia64_pal_handler ia64_pal; +extern void ia64_pal_handler_init (void *); + +extern ia64_pal_handler ia64_pal; + +extern pal_cache_config_info_t l0d_cache_config_info; +extern pal_cache_config_info_t l0i_cache_config_info; +extern pal_cache_config_info_t l1_cache_config_info; +extern pal_cache_config_info_t l2_cache_config_info; + +extern pal_cache_protection_info_t l0d_cache_protection_info; +extern pal_cache_protection_info_t l0i_cache_protection_info; +extern pal_cache_protection_info_t l1_cache_protection_info; +extern pal_cache_protection_info_t l2_cache_protection_info; + +extern pal_cache_config_info_t pal_cache_config_info_get(pal_cache_level_t, + pal_cache_type_t); + +extern pal_cache_protection_info_t pal_cache_protection_info_get(pal_cache_level_t, + pal_cache_type_t); + + +extern void pal_error(int); + + +/* Useful wrappers for the current list of pal procedures */ + +typedef union pal_bus_features_u { + u64 pal_bus_features_val; + struct { + u64 pbf_reserved1 : 29; + u64 pbf_req_bus_parking : 1; + u64 pbf_bus_lock_mask : 1; + u64 pbf_enable_half_xfer_rate : 1; + u64 pbf_reserved2 : 20; + u64 pbf_enable_shared_line_replace : 1; + u64 pbf_enable_exclusive_line_replace : 1; + u64 pbf_disable_xaction_queueing : 1; + u64 pbf_disable_resp_err_check : 1; + u64 pbf_disable_berr_check : 1; + u64 pbf_disable_bus_req_internal_err_signal : 1; + u64 pbf_disable_bus_req_berr_signal : 1; + u64 pbf_disable_bus_init_event_check : 1; + u64 pbf_disable_bus_init_event_signal : 1; + u64 pbf_disable_bus_addr_err_check : 1; + u64 pbf_disable_bus_addr_err_signal : 1; + u64 pbf_disable_bus_data_err_check : 1; + } pal_bus_features_s; +} pal_bus_features_u_t; + +extern void pal_bus_features_print (u64); + +/* Provide information about configurable processor bus features */ +static inline s64 +ia64_pal_bus_get_features (pal_bus_features_u_t *features_avail, + pal_bus_features_u_t *features_status, + pal_bus_features_u_t *features_control) +{ + struct ia64_pal_retval iprv; + PAL_CALL_PHYS(iprv, PAL_BUS_GET_FEATURES, 0, 0, 0); + if (features_avail) + features_avail->pal_bus_features_val = iprv.v0; + if (features_status) + features_status->pal_bus_features_val = iprv.v1; + if (features_control) + features_control->pal_bus_features_val = iprv.v2; + return iprv.status; +} + +/* Enables/disables specific processor bus features */ +static inline s64 +ia64_pal_bus_set_features (pal_bus_features_u_t feature_select) +{ + struct ia64_pal_retval iprv; + PAL_CALL_PHYS(iprv, PAL_BUS_SET_FEATURES, feature_select.pal_bus_features_val, 0, 0); + return iprv.status; +} + +/* Get detailed cache information */ +static inline s64 +ia64_pal_cache_config_info (u64 cache_level, u64 cache_type, pal_cache_config_info_t *conf) +{ + struct ia64_pal_retval iprv; + + PAL_CALL(iprv, PAL_CACHE_INFO, cache_level, cache_type, 0); + + if (iprv.status == 0) { + conf->pcci_status = iprv.status; + conf->pcci_info_1.pcci1_data = iprv.v0; + conf->pcci_info_2.pcci2_data = iprv.v1; + conf->pcci_reserved = iprv.v2; + } + return iprv.status; + +} + +/* Get detailed cche protection information */ +static inline s64 +ia64_pal_cache_prot_info (u64 cache_level, u64 cache_type, pal_cache_protection_info_t *prot) +{ + struct ia64_pal_retval iprv; + + PAL_CALL(iprv, PAL_CACHE_PROT_INFO, cache_level, cache_type, 0); + + if (iprv.status == 0) { + prot->pcpi_status = iprv.status; + prot->pcp_info[0].pcpi_data = iprv.v0 & 0xffffffff; + prot->pcp_info[1].pcpi_data = iprv.v0 >> 32; + prot->pcp_info[2].pcpi_data = iprv.v1 & 0xffffffff; + prot->pcp_info[3].pcpi_data = iprv.v1 >> 32; + prot->pcp_info[4].pcpi_data = iprv.v2 & 0xffffffff; + prot->pcp_info[5].pcpi_data = iprv.v2 >> 32; + } + return iprv.status; +} + +/* + * Flush the processor instruction or data caches. *PROGRESS must be + * initialized to zero before calling this for the first time.. + */ +static inline s64 +ia64_pal_cache_flush (u64 cache_type, u64 invalidate, u64 *progress, u64 *vector) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_CACHE_FLUSH, cache_type, invalidate, *progress); + if (vector) + *vector = iprv.v0; + *progress = iprv.v1; + return iprv.status; +} + + +/* Initialize the processor controlled caches */ +static inline s64 +ia64_pal_cache_init (u64 level, u64 cache_type, u64 rest) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_CACHE_INIT, level, cache_type, rest); + return iprv.status; +} + +/* Initialize the tags and data of a data or unified cache line of + * processor controlled cache to known values without the availability + * of backing memory. + */ +static inline s64 +ia64_pal_cache_line_init (u64 physical_addr, u64 data_value) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_CACHE_LINE_INIT, physical_addr, data_value, 0); + return iprv.status; +} + + +/* Read the data and tag of a processor controlled cache line for diags */ +static inline s64 +ia64_pal_cache_read (pal_cache_line_id_u_t line_id, u64 physical_addr) +{ + struct ia64_pal_retval iprv; + PAL_CALL_PHYS_STK(iprv, PAL_CACHE_READ, line_id.pclid_data, + physical_addr, 0); + return iprv.status; +} + +/* Return summary information about the hierarchy of caches controlled by the processor */ +static inline s64 +ia64_pal_cache_summary (u64 *cache_levels, u64 *unique_caches) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_CACHE_SUMMARY, 0, 0, 0); + if (cache_levels) + *cache_levels = iprv.v0; + if (unique_caches) + *unique_caches = iprv.v1; + return iprv.status; +} + +/* Write the data and tag of a processor-controlled cache line for diags */ +static inline s64 +ia64_pal_cache_write (pal_cache_line_id_u_t line_id, u64 physical_addr, u64 data) +{ + struct ia64_pal_retval iprv; + PAL_CALL_PHYS_STK(iprv, PAL_CACHE_WRITE, line_id.pclid_data, + physical_addr, data); + return iprv.status; +} + + +/* Return the parameters needed to copy relocatable PAL procedures from ROM to memory */ +static inline s64 +ia64_pal_copy_info (u64 copy_type, u64 num_procs, u64 num_iopics, + u64 *buffer_size, u64 *buffer_align) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_COPY_INFO, copy_type, num_procs, num_iopics); + if (buffer_size) + *buffer_size = iprv.v0; + if (buffer_align) + *buffer_align = iprv.v1; + return iprv.status; +} + +/* Copy relocatable PAL procedures from ROM to memory */ +static inline s64 +ia64_pal_copy_pal (u64 target_addr, u64 alloc_size, u64 processor, u64 *pal_proc_offset) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_COPY_PAL, target_addr, alloc_size, processor); + if (pal_proc_offset) + *pal_proc_offset = iprv.v0; + return iprv.status; +} + +/* Return the number of instruction and data debug register pairs */ +static inline s64 +ia64_pal_debug_info (u64 *inst_regs, u64 *data_regs) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_DEBUG_INFO, 0, 0, 0); + if (inst_regs) + *inst_regs = iprv.v0; + if (data_regs) + *data_regs = iprv.v1; + + return iprv.status; +} + +#ifdef TBD +/* Switch from IA64-system environment to IA-32 system environment */ +static inline s64 +ia64_pal_enter_ia32_env (ia32_env1, ia32_env2, ia32_env3) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_ENTER_IA_32_ENV, ia32_env1, ia32_env2, ia32_env3); + return iprv.status; +} +#endif + +/* Get unique geographical address of this processor on its bus */ +static inline s64 +ia64_pal_fixed_addr (u64 *global_unique_addr) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_FIXED_ADDR, 0, 0, 0); + if (global_unique_addr) + *global_unique_addr = iprv.v0; + return iprv.status; +} + +/* Get base frequency of the platform if generated by the processor */ +static inline s64 +ia64_pal_freq_base (u64 *platform_base_freq) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_FREQ_BASE, 0, 0, 0); + if (platform_base_freq) + *platform_base_freq = iprv.v0; + return iprv.status; +} + +/* + * Get the ratios for processor frequency, bus frequency and interval timer to + * to base frequency of the platform + */ +static inline s64 +ia64_pal_freq_ratios (struct pal_freq_ratio *proc_ratio, struct pal_freq_ratio *bus_ratio, + struct pal_freq_ratio *itc_ratio) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_FREQ_RATIOS, 0, 0, 0); + if (proc_ratio) + *(u64 *)proc_ratio = iprv.v0; + if (bus_ratio) + *(u64 *)bus_ratio = iprv.v1; + if (itc_ratio) + *(u64 *)itc_ratio = iprv.v2; + return iprv.status; +} + +/* + * Get the current hardware resource sharing policy of the processor + */ +static inline s64 +ia64_pal_get_hw_policy (u64 proc_num, u64 *cur_policy, u64 *num_impacted, + u64 *la) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_GET_HW_POLICY, proc_num, 0, 0); + if (cur_policy) + *cur_policy = iprv.v0; + if (num_impacted) + *num_impacted = iprv.v1; + if (la) + *la = iprv.v2; + return iprv.status; +} + +/* Make the processor enter HALT or one of the implementation dependent low + * power states where prefetching and execution are suspended and cache and + * TLB coherency is not maintained. + */ +static inline s64 +ia64_pal_halt (u64 halt_state) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_HALT, halt_state, 0, 0); + return iprv.status; +} + +typedef union pal_power_mgmt_info_u { + u64 ppmi_data; + struct { + u64 exit_latency : 16, + entry_latency : 16, + power_consumption : 28, + im : 1, + co : 1, + reserved : 2; + } pal_power_mgmt_info_s; +} pal_power_mgmt_info_u_t; + +/* Return information about processor's optional power management capabilities. */ +static inline s64 +ia64_pal_halt_info (pal_power_mgmt_info_u_t *power_buf) +{ + struct ia64_pal_retval iprv; + PAL_CALL_STK(iprv, PAL_HALT_INFO, (unsigned long) power_buf, 0, 0); + return iprv.status; +} + +/* Get the current P-state information */ +static inline s64 +ia64_pal_get_pstate (u64 *pstate_index, unsigned long type) +{ + struct ia64_pal_retval iprv; + PAL_CALL_STK(iprv, PAL_GET_PSTATE, type, 0, 0); + *pstate_index = iprv.v0; + return iprv.status; +} + +/* Set the P-state */ +static inline s64 +ia64_pal_set_pstate (u64 pstate_index) +{ + struct ia64_pal_retval iprv; + PAL_CALL_STK(iprv, PAL_SET_PSTATE, pstate_index, 0, 0); + return iprv.status; +} + +/* Processor branding information*/ +static inline s64 +ia64_pal_get_brand_info (char *brand_info) +{ + struct ia64_pal_retval iprv; + PAL_CALL_STK(iprv, PAL_BRAND_INFO, 0, (u64)brand_info, 0); + return iprv.status; +} + +/* Cause the processor to enter LIGHT HALT state, where prefetching and execution are + * suspended, but cache and TLB coherency is maintained. + */ +static inline s64 +ia64_pal_halt_light (void) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_HALT_LIGHT, 0, 0, 0); + return iprv.status; +} + +/* Clear all the processor error logging registers and reset the indicator that allows + * the error logging registers to be written. This procedure also checks the pending + * machine check bit and pending INIT bit and reports their states. + */ +static inline s64 +ia64_pal_mc_clear_log (u64 *pending_vector) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_MC_CLEAR_LOG, 0, 0, 0); + if (pending_vector) + *pending_vector = iprv.v0; + return iprv.status; +} + +/* Ensure that all outstanding transactions in a processor are completed or that any + * MCA due to thes outstanding transaction is taken. + */ +static inline s64 +ia64_pal_mc_drain (void) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_MC_DRAIN, 0, 0, 0); + return iprv.status; +} + +/* Return the machine check dynamic processor state */ +static inline s64 +ia64_pal_mc_dynamic_state (u64 info_type, u64 dy_buffer, u64 *size) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_MC_DYNAMIC_STATE, info_type, dy_buffer, 0); + if (size) + *size = iprv.v0; + return iprv.status; +} + +/* Return processor machine check information */ +static inline s64 +ia64_pal_mc_error_info (u64 info_index, u64 type_index, u64 *size, u64 *error_info) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_MC_ERROR_INFO, info_index, type_index, 0); + if (size) + *size = iprv.v0; + if (error_info) + *error_info = iprv.v1; + return iprv.status; +} + +/* Injects the requested processor error or returns info on + * supported injection capabilities for current processor implementation + */ +static inline s64 +ia64_pal_mc_error_inject_phys (u64 err_type_info, u64 err_struct_info, + u64 err_data_buffer, u64 *capabilities, u64 *resources) +{ + struct ia64_pal_retval iprv; + PAL_CALL_PHYS_STK(iprv, PAL_MC_ERROR_INJECT, err_type_info, + err_struct_info, err_data_buffer); + if (capabilities) + *capabilities= iprv.v0; + if (resources) + *resources= iprv.v1; + return iprv.status; +} + +static inline s64 +ia64_pal_mc_error_inject_virt (u64 err_type_info, u64 err_struct_info, + u64 err_data_buffer, u64 *capabilities, u64 *resources) +{ + struct ia64_pal_retval iprv; + PAL_CALL_STK(iprv, PAL_MC_ERROR_INJECT, err_type_info, + err_struct_info, err_data_buffer); + if (capabilities) + *capabilities= iprv.v0; + if (resources) + *resources= iprv.v1; + return iprv.status; +} + +/* Inform PALE_CHECK whether a machine check is expected so that PALE_CHECK willnot + * attempt to correct any expected machine checks. + */ +static inline s64 +ia64_pal_mc_expected (u64 expected, u64 *previous) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_MC_EXPECTED, expected, 0, 0); + if (previous) + *previous = iprv.v0; + return iprv.status; +} + +typedef union pal_hw_tracking_u { + u64 pht_data; + struct { + u64 itc :4, /* Instruction cache tracking */ + dct :4, /* Date cache tracking */ + itt :4, /* Instruction TLB tracking */ + ddt :4, /* Data TLB tracking */ + reserved:48; + } pal_hw_tracking_s; +} pal_hw_tracking_u_t; + +/* + * Hardware tracking status. + */ +static inline s64 +ia64_pal_mc_hw_tracking (u64 *status) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_MC_HW_TRACKING, 0, 0, 0); + if (status) + *status = iprv.v0; + return iprv.status; +} + +/* Register a platform dependent location with PAL to which it can save + * minimal processor state in the event of a machine check or initialization + * event. + */ +static inline s64 +ia64_pal_mc_register_mem (u64 physical_addr, u64 size, u64 *req_size) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_MC_REGISTER_MEM, physical_addr, size, 0); + if (req_size) + *req_size = iprv.v0; + return iprv.status; +} + +/* Restore minimal architectural processor state, set CMC interrupt if necessary + * and resume execution + */ +static inline s64 +ia64_pal_mc_resume (u64 set_cmci, u64 save_ptr) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_MC_RESUME, set_cmci, save_ptr, 0); + return iprv.status; +} + +/* Return the memory attributes implemented by the processor */ +static inline s64 +ia64_pal_mem_attrib (u64 *mem_attrib) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_MEM_ATTRIB, 0, 0, 0); + if (mem_attrib) + *mem_attrib = iprv.v0 & 0xff; + return iprv.status; +} + +/* Return the amount of memory needed for second phase of processor + * self-test and the required alignment of memory. + */ +static inline s64 +ia64_pal_mem_for_test (u64 *bytes_needed, u64 *alignment) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_MEM_FOR_TEST, 0, 0, 0); + if (bytes_needed) + *bytes_needed = iprv.v0; + if (alignment) + *alignment = iprv.v1; + return iprv.status; +} + +typedef union pal_perf_mon_info_u { + u64 ppmi_data; + struct { + u64 generic : 8, + width : 8, + cycles : 8, + retired : 8, + reserved : 32; + } pal_perf_mon_info_s; +} pal_perf_mon_info_u_t; + +/* Return the performance monitor information about what can be counted + * and how to configure the monitors to count the desired events. + */ +static inline s64 +ia64_pal_perf_mon_info (u64 *pm_buffer, pal_perf_mon_info_u_t *pm_info) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_PERF_MON_INFO, (unsigned long) pm_buffer, 0, 0); + if (pm_info) + pm_info->ppmi_data = iprv.v0; + return iprv.status; +} + +/* Specifies the physical address of the processor interrupt block + * and I/O port space. + */ +static inline s64 +ia64_pal_platform_addr (u64 type, u64 physical_addr) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_PLATFORM_ADDR, type, physical_addr, 0); + return iprv.status; +} + +/* Set the SAL PMI entrypoint in memory */ +static inline s64 +ia64_pal_pmi_entrypoint (u64 sal_pmi_entry_addr) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_PMI_ENTRYPOINT, sal_pmi_entry_addr, 0, 0); + return iprv.status; +} + +struct pal_features_s; +/* Provide information about configurable processor features */ +static inline s64 +ia64_pal_proc_get_features (u64 *features_avail, + u64 *features_status, + u64 *features_control, + u64 features_set) +{ + struct ia64_pal_retval iprv; + PAL_CALL_PHYS(iprv, PAL_PROC_GET_FEATURES, 0, features_set, 0); + if (iprv.status == 0) { + *features_avail = iprv.v0; + *features_status = iprv.v1; + *features_control = iprv.v2; + } + return iprv.status; +} + +/* Enable/disable processor dependent features */ +static inline s64 +ia64_pal_proc_set_features (u64 feature_select) +{ + struct ia64_pal_retval iprv; + PAL_CALL_PHYS(iprv, PAL_PROC_SET_FEATURES, feature_select, 0, 0); + return iprv.status; +} + +/* + * Put everything in a struct so we avoid the global offset table whenever + * possible. + */ +typedef struct ia64_ptce_info_s { + u64 base; + u32 count[2]; + u32 stride[2]; +} ia64_ptce_info_t; + +/* Return the information required for the architected loop used to purge + * (initialize) the entire TC + */ +static inline s64 +ia64_get_ptce (ia64_ptce_info_t *ptce) +{ + struct ia64_pal_retval iprv; + + if (!ptce) + return -1; + + PAL_CALL(iprv, PAL_PTCE_INFO, 0, 0, 0); + if (iprv.status == 0) { + ptce->base = iprv.v0; + ptce->count[0] = iprv.v1 >> 32; + ptce->count[1] = iprv.v1 & 0xffffffff; + ptce->stride[0] = iprv.v2 >> 32; + ptce->stride[1] = iprv.v2 & 0xffffffff; + } + return iprv.status; +} + +/* Return info about implemented application and control registers. */ +static inline s64 +ia64_pal_register_info (u64 info_request, u64 *reg_info_1, u64 *reg_info_2) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_REGISTER_INFO, info_request, 0, 0); + if (reg_info_1) + *reg_info_1 = iprv.v0; + if (reg_info_2) + *reg_info_2 = iprv.v1; + return iprv.status; +} + +typedef union pal_hints_u { + u64 ph_data; + struct { + u64 si : 1, + li : 1, + reserved : 62; + } pal_hints_s; +} pal_hints_u_t; + +/* Return information about the register stack and RSE for this processor + * implementation. + */ +static inline s64 +ia64_pal_rse_info (u64 *num_phys_stacked, pal_hints_u_t *hints) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_RSE_INFO, 0, 0, 0); + if (num_phys_stacked) + *num_phys_stacked = iprv.v0; + if (hints) + hints->ph_data = iprv.v1; + return iprv.status; +} + +/* + * Set the current hardware resource sharing policy of the processor + */ +static inline s64 +ia64_pal_set_hw_policy (u64 policy) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_SET_HW_POLICY, policy, 0, 0); + return iprv.status; +} + +/* Cause the processor to enter SHUTDOWN state, where prefetching and execution are + * suspended, but cause cache and TLB coherency to be maintained. + * This is usually called in IA-32 mode. + */ +static inline s64 +ia64_pal_shutdown (void) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_SHUTDOWN, 0, 0, 0); + return iprv.status; +} + +/* Perform the second phase of processor self-test. */ +static inline s64 +ia64_pal_test_proc (u64 test_addr, u64 test_size, u64 attributes, u64 *self_test_state) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_TEST_PROC, test_addr, test_size, attributes); + if (self_test_state) + *self_test_state = iprv.v0; + return iprv.status; +} + +typedef union pal_version_u { + u64 pal_version_val; + struct { + u64 pv_pal_b_rev : 8; + u64 pv_pal_b_model : 8; + u64 pv_reserved1 : 8; + u64 pv_pal_vendor : 8; + u64 pv_pal_a_rev : 8; + u64 pv_pal_a_model : 8; + u64 pv_reserved2 : 16; + } pal_version_s; +} pal_version_u_t; + + +/* + * Return PAL version information. While the documentation states that + * PAL_VERSION can be called in either physical or virtual mode, some + * implementations only allow physical calls. We don't call it very often, + * so the overhead isn't worth eliminating. + */ +static inline s64 +ia64_pal_version (pal_version_u_t *pal_min_version, pal_version_u_t *pal_cur_version) +{ + struct ia64_pal_retval iprv; + PAL_CALL_PHYS(iprv, PAL_VERSION, 0, 0, 0); + if (pal_min_version) + pal_min_version->pal_version_val = iprv.v0; + + if (pal_cur_version) + pal_cur_version->pal_version_val = iprv.v1; + + return iprv.status; +} + +typedef union pal_tc_info_u { + u64 pti_val; + struct { + u64 num_sets : 8, + associativity : 8, + num_entries : 16, + pf : 1, + unified : 1, + reduce_tr : 1, + reserved : 29; + } pal_tc_info_s; +} pal_tc_info_u_t; + +#define tc_reduce_tr pal_tc_info_s.reduce_tr +#define tc_unified pal_tc_info_s.unified +#define tc_pf pal_tc_info_s.pf +#define tc_num_entries pal_tc_info_s.num_entries +#define tc_associativity pal_tc_info_s.associativity +#define tc_num_sets pal_tc_info_s.num_sets + + +/* Return information about the virtual memory characteristics of the processor + * implementation. + */ +static inline s64 +ia64_pal_vm_info (u64 tc_level, u64 tc_type, pal_tc_info_u_t *tc_info, u64 *tc_pages) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_VM_INFO, tc_level, tc_type, 0); + if (tc_info) + tc_info->pti_val = iprv.v0; + if (tc_pages) + *tc_pages = iprv.v1; + return iprv.status; +} + +/* Get page size information about the virtual memory characteristics of the processor + * implementation. + */ +static inline s64 +ia64_pal_vm_page_size (u64 *tr_pages, u64 *vw_pages) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_VM_PAGE_SIZE, 0, 0, 0); + if (tr_pages) + *tr_pages = iprv.v0; + if (vw_pages) + *vw_pages = iprv.v1; + return iprv.status; +} + +typedef union pal_vm_info_1_u { + u64 pvi1_val; + struct { + u64 vw : 1, + phys_add_size : 7, + key_size : 8, + max_pkr : 8, + hash_tag_id : 8, + max_dtr_entry : 8, + max_itr_entry : 8, + max_unique_tcs : 8, + num_tc_levels : 8; + } pal_vm_info_1_s; +} pal_vm_info_1_u_t; + +#define PAL_MAX_PURGES 0xFFFF /* all ones is means unlimited */ + +typedef union pal_vm_info_2_u { + u64 pvi2_val; + struct { + u64 impl_va_msb : 8, + rid_size : 8, + max_purges : 16, + reserved : 32; + } pal_vm_info_2_s; +} pal_vm_info_2_u_t; + +/* Get summary information about the virtual memory characteristics of the processor + * implementation. + */ +static inline s64 +ia64_pal_vm_summary (pal_vm_info_1_u_t *vm_info_1, pal_vm_info_2_u_t *vm_info_2) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_VM_SUMMARY, 0, 0, 0); + if (vm_info_1) + vm_info_1->pvi1_val = iprv.v0; + if (vm_info_2) + vm_info_2->pvi2_val = iprv.v1; + return iprv.status; +} + +typedef union pal_vp_info_u { + u64 pvi_val; + struct { + u64 index: 48, /* virtual feature set info */ + vmm_id: 16; /* feature set id */ + } pal_vp_info_s; +} pal_vp_info_u_t; + +/* + * Returns infomation about virtual processor features + */ +static inline s64 +ia64_pal_vp_info (u64 feature_set, u64 vp_buffer, u64 *vp_info, u64 *vmm_id) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_VP_INFO, feature_set, vp_buffer, 0); + if (vp_info) + *vp_info = iprv.v0; + if (vmm_id) + *vmm_id = iprv.v1; + return iprv.status; +} + +typedef union pal_itr_valid_u { + u64 piv_val; + struct { + u64 access_rights_valid : 1, + priv_level_valid : 1, + dirty_bit_valid : 1, + mem_attr_valid : 1, + reserved : 60; + } pal_tr_valid_s; +} pal_tr_valid_u_t; + +/* Read a translation register */ +static inline s64 +ia64_pal_tr_read (u64 reg_num, u64 tr_type, u64 *tr_buffer, pal_tr_valid_u_t *tr_valid) +{ + struct ia64_pal_retval iprv; + PAL_CALL_PHYS_STK(iprv, PAL_VM_TR_READ, reg_num, tr_type,(u64)ia64_tpa(tr_buffer)); + if (tr_valid) + tr_valid->piv_val = iprv.v0; + return iprv.status; +} + +/* + * PAL_PREFETCH_VISIBILITY transaction types + */ +#define PAL_VISIBILITY_VIRTUAL 0 +#define PAL_VISIBILITY_PHYSICAL 1 + +/* + * PAL_PREFETCH_VISIBILITY return codes + */ +#define PAL_VISIBILITY_OK 1 +#define PAL_VISIBILITY_OK_REMOTE_NEEDED 0 +#define PAL_VISIBILITY_INVAL_ARG -2 +#define PAL_VISIBILITY_ERROR -3 + +static inline s64 +ia64_pal_prefetch_visibility (s64 trans_type) +{ + struct ia64_pal_retval iprv; + PAL_CALL(iprv, PAL_PREFETCH_VISIBILITY, trans_type, 0, 0); + return iprv.status; +} + +/* data structure for getting information on logical to physical mappings */ +typedef union pal_log_overview_u { + struct { + u64 num_log :16, /* Total number of logical + * processors on this die + */ + tpc :8, /* Threads per core */ + reserved3 :8, /* Reserved */ + cpp :8, /* Cores per processor */ + reserved2 :8, /* Reserved */ + ppid :8, /* Physical processor ID */ + reserved1 :8; /* Reserved */ + } overview_bits; + u64 overview_data; +} pal_log_overview_t; + +typedef union pal_proc_n_log_info1_u{ + struct { + u64 tid :16, /* Thread id */ + reserved2 :16, /* Reserved */ + cid :16, /* Core id */ + reserved1 :16; /* Reserved */ + } ppli1_bits; + u64 ppli1_data; +} pal_proc_n_log_info1_t; + +typedef union pal_proc_n_log_info2_u { + struct { + u64 la :16, /* Logical address */ + reserved :48; /* Reserved */ + } ppli2_bits; + u64 ppli2_data; +} pal_proc_n_log_info2_t; + +typedef struct pal_logical_to_physical_s +{ + pal_log_overview_t overview; + pal_proc_n_log_info1_t ppli1; + pal_proc_n_log_info2_t ppli2; +} pal_logical_to_physical_t; + +#define overview_num_log overview.overview_bits.num_log +#define overview_tpc overview.overview_bits.tpc +#define overview_cpp overview.overview_bits.cpp +#define overview_ppid overview.overview_bits.ppid +#define log1_tid ppli1.ppli1_bits.tid +#define log1_cid ppli1.ppli1_bits.cid +#define log2_la ppli2.ppli2_bits.la + +/* Get information on logical to physical processor mappings. */ +static inline s64 +ia64_pal_logical_to_phys(u64 proc_number, pal_logical_to_physical_t *mapping) +{ + struct ia64_pal_retval iprv; + + PAL_CALL(iprv, PAL_LOGICAL_TO_PHYSICAL, proc_number, 0, 0); + + if (iprv.status == PAL_STATUS_SUCCESS) + { + mapping->overview.overview_data = iprv.v0; + mapping->ppli1.ppli1_data = iprv.v1; + mapping->ppli2.ppli2_data = iprv.v2; + } + + return iprv.status; +} + +typedef struct pal_cache_shared_info_s +{ + u64 num_shared; + pal_proc_n_log_info1_t ppli1; + pal_proc_n_log_info2_t ppli2; +} pal_cache_shared_info_t; + +/* Get information on logical to physical processor mappings. */ +static inline s64 +ia64_pal_cache_shared_info(u64 level, + u64 type, + u64 proc_number, + pal_cache_shared_info_t *info) +{ + struct ia64_pal_retval iprv; + + PAL_CALL(iprv, PAL_CACHE_SHARED_INFO, level, type, proc_number); + + if (iprv.status == PAL_STATUS_SUCCESS) { + info->num_shared = iprv.v0; + info->ppli1.ppli1_data = iprv.v1; + info->ppli2.ppli2_data = iprv.v2; + } + + return iprv.status; +} +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_IA64_PAL_H */ diff --git a/arch/ia64/include/asm/param.h b/arch/ia64/include/asm/param.h new file mode 100644 index 000000000000..0964c32c1358 --- /dev/null +++ b/arch/ia64/include/asm/param.h @@ -0,0 +1,33 @@ +#ifndef _ASM_IA64_PARAM_H +#define _ASM_IA64_PARAM_H + +/* + * Fundamental kernel parameters. + * + * Based on . + * + * Modified 1998, 1999, 2002-2003 + * David Mosberger-Tang , Hewlett-Packard Co + */ + +#define EXEC_PAGESIZE 65536 + +#ifndef NOGROUP +# define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#ifdef __KERNEL__ +# define HZ CONFIG_HZ +# define USER_HZ HZ +# define CLOCKS_PER_SEC HZ /* frequency at which times() counts */ +#else + /* + * Technically, this is wrong, but some old apps still refer to it. The proper way to + * get the HZ value is via sysconf(_SC_CLK_TCK). + */ +# define HZ 1024 +#endif + +#endif /* _ASM_IA64_PARAM_H */ diff --git a/arch/ia64/include/asm/paravirt.h b/arch/ia64/include/asm/paravirt.h new file mode 100644 index 000000000000..660cab044834 --- /dev/null +++ b/arch/ia64/include/asm/paravirt.h @@ -0,0 +1,253 @@ +/****************************************************************************** + * Copyright (c) 2008 Isaku Yamahata + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + + +#ifndef __ASM_PARAVIRT_H +#define __ASM_PARAVIRT_H + +#ifdef CONFIG_PARAVIRT_GUEST + +#define PARAVIRT_HYPERVISOR_TYPE_DEFAULT 0 +#define PARAVIRT_HYPERVISOR_TYPE_XEN 1 + +#ifndef __ASSEMBLY__ + +#include +#include + +/****************************************************************************** + * general info + */ +struct pv_info { + unsigned int kernel_rpl; + int paravirt_enabled; + const char *name; +}; + +extern struct pv_info pv_info; + +static inline int paravirt_enabled(void) +{ + return pv_info.paravirt_enabled; +} + +static inline unsigned int get_kernel_rpl(void) +{ + return pv_info.kernel_rpl; +} + +/****************************************************************************** + * initialization hooks. + */ +struct rsvd_region; + +struct pv_init_ops { + void (*banner)(void); + + int (*reserve_memory)(struct rsvd_region *region); + + void (*arch_setup_early)(void); + void (*arch_setup_console)(char **cmdline_p); + int (*arch_setup_nomca)(void); + + void (*post_smp_prepare_boot_cpu)(void); +}; + +extern struct pv_init_ops pv_init_ops; + +static inline void paravirt_banner(void) +{ + if (pv_init_ops.banner) + pv_init_ops.banner(); +} + +static inline int paravirt_reserve_memory(struct rsvd_region *region) +{ + if (pv_init_ops.reserve_memory) + return pv_init_ops.reserve_memory(region); + return 0; +} + +static inline void paravirt_arch_setup_early(void) +{ + if (pv_init_ops.arch_setup_early) + pv_init_ops.arch_setup_early(); +} + +static inline void paravirt_arch_setup_console(char **cmdline_p) +{ + if (pv_init_ops.arch_setup_console) + pv_init_ops.arch_setup_console(cmdline_p); +} + +static inline int paravirt_arch_setup_nomca(void) +{ + if (pv_init_ops.arch_setup_nomca) + return pv_init_ops.arch_setup_nomca(); + return 0; +} + +static inline void paravirt_post_smp_prepare_boot_cpu(void) +{ + if (pv_init_ops.post_smp_prepare_boot_cpu) + pv_init_ops.post_smp_prepare_boot_cpu(); +} + +/****************************************************************************** + * replacement of iosapic operations. + */ + +struct pv_iosapic_ops { + void (*pcat_compat_init)(void); + + struct irq_chip *(*get_irq_chip)(unsigned long trigger); + + unsigned int (*__read)(char __iomem *iosapic, unsigned int reg); + void (*__write)(char __iomem *iosapic, unsigned int reg, u32 val); +}; + +extern struct pv_iosapic_ops pv_iosapic_ops; + +static inline void +iosapic_pcat_compat_init(void) +{ + if (pv_iosapic_ops.pcat_compat_init) + pv_iosapic_ops.pcat_compat_init(); +} + +static inline struct irq_chip* +iosapic_get_irq_chip(unsigned long trigger) +{ + return pv_iosapic_ops.get_irq_chip(trigger); +} + +static inline unsigned int +__iosapic_read(char __iomem *iosapic, unsigned int reg) +{ + return pv_iosapic_ops.__read(iosapic, reg); +} + +static inline void +__iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val) +{ + return pv_iosapic_ops.__write(iosapic, reg, val); +} + +/****************************************************************************** + * replacement of irq operations. + */ + +struct pv_irq_ops { + void (*register_ipi)(void); + + int (*assign_irq_vector)(int irq); + void (*free_irq_vector)(int vector); + + void (*register_percpu_irq)(ia64_vector vec, + struct irqaction *action); + + void (*resend_irq)(unsigned int vector); +}; + +extern struct pv_irq_ops pv_irq_ops; + +static inline void +ia64_register_ipi(void) +{ + pv_irq_ops.register_ipi(); +} + +static inline int +assign_irq_vector(int irq) +{ + return pv_irq_ops.assign_irq_vector(irq); +} + +static inline void +free_irq_vector(int vector) +{ + return pv_irq_ops.free_irq_vector(vector); +} + +static inline void +register_percpu_irq(ia64_vector vec, struct irqaction *action) +{ + pv_irq_ops.register_percpu_irq(vec, action); +} + +static inline void +ia64_resend_irq(unsigned int vector) +{ + pv_irq_ops.resend_irq(vector); +} + +/****************************************************************************** + * replacement of time operations. + */ + +extern struct itc_jitter_data_t itc_jitter_data; +extern volatile int time_keeper_id; + +struct pv_time_ops { + void (*init_missing_ticks_accounting)(int cpu); + int (*do_steal_accounting)(unsigned long *new_itm); + + void (*clocksource_resume)(void); +}; + +extern struct pv_time_ops pv_time_ops; + +static inline void +paravirt_init_missing_ticks_accounting(int cpu) +{ + if (pv_time_ops.init_missing_ticks_accounting) + pv_time_ops.init_missing_ticks_accounting(cpu); +} + +static inline int +paravirt_do_steal_accounting(unsigned long *new_itm) +{ + return pv_time_ops.do_steal_accounting(new_itm); +} + +#endif /* !__ASSEMBLY__ */ + +#else +/* fallback for native case */ + +#ifndef __ASSEMBLY__ + +#define paravirt_banner() do { } while (0) +#define paravirt_reserve_memory(region) 0 + +#define paravirt_arch_setup_early() do { } while (0) +#define paravirt_arch_setup_console(cmdline_p) do { } while (0) +#define paravirt_arch_setup_nomca() 0 +#define paravirt_post_smp_prepare_boot_cpu() do { } while (0) + +#define paravirt_init_missing_ticks_accounting(cpu) do { } while (0) +#define paravirt_do_steal_accounting(new_itm) 0 + +#endif /* __ASSEMBLY__ */ + + +#endif /* CONFIG_PARAVIRT_GUEST */ + +#endif /* __ASM_PARAVIRT_H */ diff --git a/arch/ia64/include/asm/paravirt_privop.h b/arch/ia64/include/asm/paravirt_privop.h new file mode 100644 index 000000000000..d577aac11835 --- /dev/null +++ b/arch/ia64/include/asm/paravirt_privop.h @@ -0,0 +1,112 @@ +/****************************************************************************** + * Copyright (c) 2008 Isaku Yamahata + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef _ASM_IA64_PARAVIRT_PRIVOP_H +#define _ASM_IA64_PARAVIRT_PRIVOP_H + +#ifdef CONFIG_PARAVIRT + +#ifndef __ASSEMBLY__ + +#include +#include /* for IA64_PSR_I */ + +/****************************************************************************** + * replacement of intrinsics operations. + */ + +struct pv_cpu_ops { + void (*fc)(unsigned long addr); + unsigned long (*thash)(unsigned long addr); + unsigned long (*get_cpuid)(int index); + unsigned long (*get_pmd)(int index); + unsigned long (*getreg)(int reg); + void (*setreg)(int reg, unsigned long val); + void (*ptcga)(unsigned long addr, unsigned long size); + unsigned long (*get_rr)(unsigned long index); + void (*set_rr)(unsigned long index, unsigned long val); + void (*set_rr0_to_rr4)(unsigned long val0, unsigned long val1, + unsigned long val2, unsigned long val3, + unsigned long val4); + void (*ssm_i)(void); + void (*rsm_i)(void); + unsigned long (*get_psr_i)(void); + void (*intrin_local_irq_restore)(unsigned long flags); +}; + +extern struct pv_cpu_ops pv_cpu_ops; + +extern void ia64_native_setreg_func(int regnum, unsigned long val); +extern unsigned long ia64_native_getreg_func(int regnum); + +/************************************************/ +/* Instructions paravirtualized for performance */ +/************************************************/ + +/* mask for ia64_native_ssm/rsm() must be constant.("i" constraing). + * static inline function doesn't satisfy it. */ +#define paravirt_ssm(mask) \ + do { \ + if ((mask) == IA64_PSR_I) \ + pv_cpu_ops.ssm_i(); \ + else \ + ia64_native_ssm(mask); \ + } while (0) + +#define paravirt_rsm(mask) \ + do { \ + if ((mask) == IA64_PSR_I) \ + pv_cpu_ops.rsm_i(); \ + else \ + ia64_native_rsm(mask); \ + } while (0) + +/****************************************************************************** + * replacement of hand written assembly codes. + */ +struct pv_cpu_asm_switch { + unsigned long switch_to; + unsigned long leave_syscall; + unsigned long work_processed_syscall; + unsigned long leave_kernel; +}; +void paravirt_cpu_asm_init(const struct pv_cpu_asm_switch *cpu_asm_switch); + +#endif /* __ASSEMBLY__ */ + +#define IA64_PARAVIRT_ASM_FUNC(name) paravirt_ ## name + +#else + +/* fallback for native case */ +#define IA64_PARAVIRT_ASM_FUNC(name) ia64_native_ ## name + +#endif /* CONFIG_PARAVIRT */ + +/* these routines utilize privilege-sensitive or performance-sensitive + * privileged instructions so the code must be replaced with + * paravirtualized versions */ +#define ia64_switch_to IA64_PARAVIRT_ASM_FUNC(switch_to) +#define ia64_leave_syscall IA64_PARAVIRT_ASM_FUNC(leave_syscall) +#define ia64_work_processed_syscall \ + IA64_PARAVIRT_ASM_FUNC(work_processed_syscall) +#define ia64_leave_kernel IA64_PARAVIRT_ASM_FUNC(leave_kernel) + +#endif /* _ASM_IA64_PARAVIRT_PRIVOP_H */ diff --git a/arch/ia64/include/asm/parport.h b/arch/ia64/include/asm/parport.h new file mode 100644 index 000000000000..67e16adfcd25 --- /dev/null +++ b/arch/ia64/include/asm/parport.h @@ -0,0 +1,20 @@ +/* + * parport.h: platform-specific PC-style parport initialisation + * + * Copyright (C) 1999, 2000 Tim Waugh + * + * This file should only be included by drivers/parport/parport_pc.c. + */ + +#ifndef _ASM_IA64_PARPORT_H +#define _ASM_IA64_PARPORT_H 1 + +static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); + +static int __devinit +parport_pc_find_nonpci_ports (int autoirq, int autodma) +{ + return parport_pc_find_isa_ports(autoirq, autodma); +} + +#endif /* _ASM_IA64_PARPORT_H */ diff --git a/arch/ia64/include/asm/patch.h b/arch/ia64/include/asm/patch.h new file mode 100644 index 000000000000..295fe6ab4584 --- /dev/null +++ b/arch/ia64/include/asm/patch.h @@ -0,0 +1,27 @@ +#ifndef _ASM_IA64_PATCH_H +#define _ASM_IA64_PATCH_H + +/* + * Copyright (C) 2003 Hewlett-Packard Co + * David Mosberger-Tang + * + * There are a number of reasons for patching instructions. Rather than duplicating code + * all over the place, we put the common stuff here. Reasons for patching: in-kernel + * module-loader, virtual-to-physical patch-list, McKinley Errata 9 workaround, and gate + * shared library. Undoubtedly, some of these reasons will disappear and others will + * be added over time. + */ +#include +#include + +extern void ia64_patch (u64 insn_addr, u64 mask, u64 val); /* patch any insn slot */ +extern void ia64_patch_imm64 (u64 insn_addr, u64 val); /* patch "movl" w/abs. value*/ +extern void ia64_patch_imm60 (u64 insn_addr, u64 val); /* patch "brl" w/ip-rel value */ + +extern void ia64_patch_mckinley_e9 (unsigned long start, unsigned long end); +extern void ia64_patch_vtop (unsigned long start, unsigned long end); +extern void ia64_patch_phys_stack_reg(unsigned long val); +extern void ia64_patch_rse (unsigned long start, unsigned long end); +extern void ia64_patch_gate (void); + +#endif /* _ASM_IA64_PATCH_H */ diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h new file mode 100644 index 000000000000..0149097b736d --- /dev/null +++ b/arch/ia64/include/asm/pci.h @@ -0,0 +1,167 @@ +#ifndef _ASM_IA64_PCI_H +#define _ASM_IA64_PCI_H + +#include +#include +#include +#include +#include + +#include +#include +#include + +/* + * Can be used to override the logic in pci_scan_bus for skipping already-configured bus + * numbers - to be used for buggy BIOSes or architectures with incomplete PCI setup by the + * loader. + */ +#define pcibios_assign_all_busses() 0 +#define pcibios_scan_all_fns(a, b) 0 + +#define PCIBIOS_MIN_IO 0x1000 +#define PCIBIOS_MIN_MEM 0x10000000 + +void pcibios_config_init(void); + +struct pci_dev; + +/* + * PCI_DMA_BUS_IS_PHYS should be set to 1 if there is _necessarily_ a direct + * correspondence between device bus addresses and CPU physical addresses. + * Platforms with a hardware I/O MMU _must_ turn this off to suppress the + * bounce buffer handling code in the block and network device layers. + * Platforms with separate bus address spaces _must_ turn this off and provide + * a device DMA mapping implementation that takes care of the necessary + * address translation. + * + * For now, the ia64 platforms which may have separate/multiple bus address + * spaces all have I/O MMUs which support the merging of physically + * discontiguous buffers, so we can use that as the sole factor to determine + * the setting of PCI_DMA_BUS_IS_PHYS. + */ +extern unsigned long ia64_max_iommu_merge_mask; +#define PCI_DMA_BUS_IS_PHYS (ia64_max_iommu_merge_mask == ~0UL) + +static inline void +pcibios_set_master (struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + +static inline void +pcibios_penalize_isa_irq (int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +#include + +/* pci_unmap_{single,page} is not a nop, thus... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + unsigned long cacheline_size; + u8 byte; + + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte); + if (byte == 0) + cacheline_size = 1024; + else + cacheline_size = (int) byte * 4; + + *strat = PCI_DMA_BURST_MULTIPLE; + *strategy_parameter = cacheline_size; +} +#endif + +#define HAVE_PCI_MMAP +extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); +#define HAVE_PCI_LEGACY +extern int pci_mmap_legacy_page_range(struct pci_bus *bus, + struct vm_area_struct *vma); +extern ssize_t pci_read_legacy_io(struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count); +extern ssize_t pci_write_legacy_io(struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count); +extern int pci_mmap_legacy_mem(struct kobject *kobj, + struct bin_attribute *attr, + struct vm_area_struct *vma); + +#define pci_get_legacy_mem platform_pci_get_legacy_mem +#define pci_legacy_read platform_pci_legacy_read +#define pci_legacy_write platform_pci_legacy_write + +struct pci_window { + struct resource resource; + u64 offset; +}; + +struct pci_controller { + void *acpi_handle; + void *iommu; + int segment; + int node; /* nearest node with memory or -1 for global allocation */ + + unsigned int windows; + struct pci_window *window; + + void *platform_data; +}; + +#define PCI_CONTROLLER(busdev) ((struct pci_controller *) busdev->sysdata) +#define pci_domain_nr(busdev) (PCI_CONTROLLER(busdev)->segment) + +extern struct pci_ops pci_root_ops; + +static inline int pci_proc_domain(struct pci_bus *bus) +{ + return (pci_domain_nr(bus) != 0); +} + +extern void pcibios_resource_to_bus(struct pci_dev *dev, + struct pci_bus_region *region, struct resource *res); + +extern void pcibios_bus_to_resource(struct pci_dev *dev, + struct resource *res, struct pci_bus_region *region); + +static inline struct resource * +pcibios_select_root(struct pci_dev *pdev, struct resource *res) +{ + struct resource *root = NULL; + + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + if (res->flags & IORESOURCE_MEM) + root = &iomem_resource; + + return root; +} + +#define pcibios_scan_all_fns(a, b) 0 + +#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return channel ? isa_irq_to_vector(15) : isa_irq_to_vector(14); +} + +#endif /* _ASM_IA64_PCI_H */ diff --git a/arch/ia64/include/asm/percpu.h b/arch/ia64/include/asm/percpu.h new file mode 100644 index 000000000000..77f30b664b4e --- /dev/null +++ b/arch/ia64/include/asm/percpu.h @@ -0,0 +1,51 @@ +#ifndef _ASM_IA64_PERCPU_H +#define _ASM_IA64_PERCPU_H + +/* + * Copyright (C) 2002-2003 Hewlett-Packard Co + * David Mosberger-Tang + */ + +#define PERCPU_ENOUGH_ROOM PERCPU_PAGE_SIZE + +#ifdef __ASSEMBLY__ +# define THIS_CPU(var) (per_cpu__##var) /* use this to mark accesses to per-CPU variables... */ +#else /* !__ASSEMBLY__ */ + + +#include + +#ifdef CONFIG_SMP + +#ifdef HAVE_MODEL_SMALL_ATTRIBUTE +# define PER_CPU_ATTRIBUTES __attribute__((__model__ (__small__))) +#endif + +#define __my_cpu_offset __ia64_per_cpu_var(local_per_cpu_offset) + +extern void *per_cpu_init(void); + +#else /* ! SMP */ + +#define PER_CPU_ATTRIBUTES __attribute__((__section__(".data.percpu"))) + +#define per_cpu_init() (__phys_per_cpu_start) + +#endif /* SMP */ + +/* + * Be extremely careful when taking the address of this variable! Due to virtual + * remapping, it is different from the canonical address returned by __get_cpu_var(var)! + * On the positive side, using __ia64_per_cpu_var() instead of __get_cpu_var() is slightly + * more efficient. + */ +#define __ia64_per_cpu_var(var) per_cpu__##var + +#include + +/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */ +DECLARE_PER_CPU(unsigned long, local_per_cpu_offset); + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_IA64_PERCPU_H */ diff --git a/arch/ia64/include/asm/perfmon.h b/arch/ia64/include/asm/perfmon.h new file mode 100644 index 000000000000..7f3333dd00e4 --- /dev/null +++ b/arch/ia64/include/asm/perfmon.h @@ -0,0 +1,279 @@ +/* + * Copyright (C) 2001-2003 Hewlett-Packard Co + * Stephane Eranian + */ + +#ifndef _ASM_IA64_PERFMON_H +#define _ASM_IA64_PERFMON_H + +/* + * perfmon comamnds supported on all CPU models + */ +#define PFM_WRITE_PMCS 0x01 +#define PFM_WRITE_PMDS 0x02 +#define PFM_READ_PMDS 0x03 +#define PFM_STOP 0x04 +#define PFM_START 0x05 +#define PFM_ENABLE 0x06 /* obsolete */ +#define PFM_DISABLE 0x07 /* obsolete */ +#define PFM_CREATE_CONTEXT 0x08 +#define PFM_DESTROY_CONTEXT 0x09 /* obsolete use close() */ +#define PFM_RESTART 0x0a +#define PFM_PROTECT_CONTEXT 0x0b /* obsolete */ +#define PFM_GET_FEATURES 0x0c +#define PFM_DEBUG 0x0d +#define PFM_UNPROTECT_CONTEXT 0x0e /* obsolete */ +#define PFM_GET_PMC_RESET_VAL 0x0f +#define PFM_LOAD_CONTEXT 0x10 +#define PFM_UNLOAD_CONTEXT 0x11 + +/* + * PMU model specific commands (may not be supported on all PMU models) + */ +#define PFM_WRITE_IBRS 0x20 +#define PFM_WRITE_DBRS 0x21 + +/* + * context flags + */ +#define PFM_FL_NOTIFY_BLOCK 0x01 /* block task on user level notifications */ +#define PFM_FL_SYSTEM_WIDE 0x02 /* create a system wide context */ +#define PFM_FL_OVFL_NO_MSG 0x80 /* do not post overflow/end messages for notification */ + +/* + * event set flags + */ +#define PFM_SETFL_EXCL_IDLE 0x01 /* exclude idle task (syswide only) XXX: DO NOT USE YET */ + +/* + * PMC flags + */ +#define PFM_REGFL_OVFL_NOTIFY 0x1 /* send notification on overflow */ +#define PFM_REGFL_RANDOM 0x2 /* randomize sampling interval */ + +/* + * PMD/PMC/IBR/DBR return flags (ignored on input) + * + * Those flags are used on output and must be checked in case EAGAIN is returned + * by any of the calls using a pfarg_reg_t or pfarg_dbreg_t structure. + */ +#define PFM_REG_RETFL_NOTAVAIL (1UL<<31) /* set if register is implemented but not available */ +#define PFM_REG_RETFL_EINVAL (1UL<<30) /* set if register entry is invalid */ +#define PFM_REG_RETFL_MASK (PFM_REG_RETFL_NOTAVAIL|PFM_REG_RETFL_EINVAL) + +#define PFM_REG_HAS_ERROR(flag) (((flag) & PFM_REG_RETFL_MASK) != 0) + +typedef unsigned char pfm_uuid_t[16]; /* custom sampling buffer identifier type */ + +/* + * Request structure used to define a context + */ +typedef struct { + pfm_uuid_t ctx_smpl_buf_id; /* which buffer format to use (if needed) */ + unsigned long ctx_flags; /* noblock/block */ + unsigned short ctx_nextra_sets; /* number of extra event sets (you always get 1) */ + unsigned short ctx_reserved1; /* for future use */ + int ctx_fd; /* return arg: unique identification for context */ + void *ctx_smpl_vaddr; /* return arg: virtual address of sampling buffer, is used */ + unsigned long ctx_reserved2[11];/* for future use */ +} pfarg_context_t; + +/* + * Request structure used to write/read a PMC or PMD + */ +typedef struct { + unsigned int reg_num; /* which register */ + unsigned short reg_set; /* event set for this register */ + unsigned short reg_reserved1; /* for future use */ + + unsigned long reg_value; /* initial pmc/pmd value */ + unsigned long reg_flags; /* input: pmc/pmd flags, return: reg error */ + + unsigned long reg_long_reset; /* reset after buffer overflow notification */ + unsigned long reg_short_reset; /* reset after counter overflow */ + + unsigned long reg_reset_pmds[4]; /* which other counters to reset on overflow */ + unsigned long reg_random_seed; /* seed value when randomization is used */ + unsigned long reg_random_mask; /* bitmask used to limit random value */ + unsigned long reg_last_reset_val;/* return: PMD last reset value */ + + unsigned long reg_smpl_pmds[4]; /* which pmds are accessed when PMC overflows */ + unsigned long reg_smpl_eventid; /* opaque sampling event identifier */ + + unsigned long reg_reserved2[3]; /* for future use */ +} pfarg_reg_t; + +typedef struct { + unsigned int dbreg_num; /* which debug register */ + unsigned short dbreg_set; /* event set for this register */ + unsigned short dbreg_reserved1; /* for future use */ + unsigned long dbreg_value; /* value for debug register */ + unsigned long dbreg_flags; /* return: dbreg error */ + unsigned long dbreg_reserved2[1]; /* for future use */ +} pfarg_dbreg_t; + +typedef struct { + unsigned int ft_version; /* perfmon: major [16-31], minor [0-15] */ + unsigned int ft_reserved; /* reserved for future use */ + unsigned long reserved[4]; /* for future use */ +} pfarg_features_t; + +typedef struct { + pid_t load_pid; /* process to load the context into */ + unsigned short load_set; /* first event set to load */ + unsigned short load_reserved1; /* for future use */ + unsigned long load_reserved2[3]; /* for future use */ +} pfarg_load_t; + +typedef struct { + int msg_type; /* generic message header */ + int msg_ctx_fd; /* generic message header */ + unsigned long msg_ovfl_pmds[4]; /* which PMDs overflowed */ + unsigned short msg_active_set; /* active set at the time of overflow */ + unsigned short msg_reserved1; /* for future use */ + unsigned int msg_reserved2; /* for future use */ + unsigned long msg_tstamp; /* for perf tuning/debug */ +} pfm_ovfl_msg_t; + +typedef struct { + int msg_type; /* generic message header */ + int msg_ctx_fd; /* generic message header */ + unsigned long msg_tstamp; /* for perf tuning */ +} pfm_end_msg_t; + +typedef struct { + int msg_type; /* type of the message */ + int msg_ctx_fd; /* unique identifier for the context */ + unsigned long msg_tstamp; /* for perf tuning */ +} pfm_gen_msg_t; + +#define PFM_MSG_OVFL 1 /* an overflow happened */ +#define PFM_MSG_END 2 /* task to which context was attached ended */ + +typedef union { + pfm_ovfl_msg_t pfm_ovfl_msg; + pfm_end_msg_t pfm_end_msg; + pfm_gen_msg_t pfm_gen_msg; +} pfm_msg_t; + +/* + * Define the version numbers for both perfmon as a whole and the sampling buffer format. + */ +#define PFM_VERSION_MAJ 2U +#define PFM_VERSION_MIN 0U +#define PFM_VERSION (((PFM_VERSION_MAJ&0xffff)<<16)|(PFM_VERSION_MIN & 0xffff)) +#define PFM_VERSION_MAJOR(x) (((x)>>16) & 0xffff) +#define PFM_VERSION_MINOR(x) ((x) & 0xffff) + + +/* + * miscellaneous architected definitions + */ +#define PMU_FIRST_COUNTER 4 /* first counting monitor (PMC/PMD) */ +#define PMU_MAX_PMCS 256 /* maximum architected number of PMC registers */ +#define PMU_MAX_PMDS 256 /* maximum architected number of PMD registers */ + +#ifdef __KERNEL__ + +extern long perfmonctl(int fd, int cmd, void *arg, int narg); + +typedef struct { + void (*handler)(int irq, void *arg, struct pt_regs *regs); +} pfm_intr_handler_desc_t; + +extern void pfm_save_regs (struct task_struct *); +extern void pfm_load_regs (struct task_struct *); + +extern void pfm_exit_thread(struct task_struct *); +extern int pfm_use_debug_registers(struct task_struct *); +extern int pfm_release_debug_registers(struct task_struct *); +extern void pfm_syst_wide_update_task(struct task_struct *, unsigned long info, int is_ctxswin); +extern void pfm_inherit(struct task_struct *task, struct pt_regs *regs); +extern void pfm_init_percpu(void); +extern void pfm_handle_work(void); +extern int pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *h); +extern int pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *h); + + + +/* + * Reset PMD register flags + */ +#define PFM_PMD_SHORT_RESET 0 +#define PFM_PMD_LONG_RESET 1 + +typedef union { + unsigned int val; + struct { + unsigned int notify_user:1; /* notify user program of overflow */ + unsigned int reset_ovfl_pmds:1; /* reset overflowed PMDs */ + unsigned int block_task:1; /* block monitored task on kernel exit */ + unsigned int mask_monitoring:1; /* mask monitors via PMCx.plm */ + unsigned int reserved:28; /* for future use */ + } bits; +} pfm_ovfl_ctrl_t; + +typedef struct { + unsigned char ovfl_pmd; /* index of overflowed PMD */ + unsigned char ovfl_notify; /* =1 if monitor requested overflow notification */ + unsigned short active_set; /* event set active at the time of the overflow */ + pfm_ovfl_ctrl_t ovfl_ctrl; /* return: perfmon controls to set by handler */ + + unsigned long pmd_last_reset; /* last reset value of of the PMD */ + unsigned long smpl_pmds[4]; /* bitmask of other PMD of interest on overflow */ + unsigned long smpl_pmds_values[PMU_MAX_PMDS]; /* values for the other PMDs of interest */ + unsigned long pmd_value; /* current 64-bit value of the PMD */ + unsigned long pmd_eventid; /* eventid associated with PMD */ +} pfm_ovfl_arg_t; + + +typedef struct { + char *fmt_name; + pfm_uuid_t fmt_uuid; + size_t fmt_arg_size; + unsigned long fmt_flags; + + int (*fmt_validate)(struct task_struct *task, unsigned int flags, int cpu, void *arg); + int (*fmt_getsize)(struct task_struct *task, unsigned int flags, int cpu, void *arg, unsigned long *size); + int (*fmt_init)(struct task_struct *task, void *buf, unsigned int flags, int cpu, void *arg); + int (*fmt_handler)(struct task_struct *task, void *buf, pfm_ovfl_arg_t *arg, struct pt_regs *regs, unsigned long stamp); + int (*fmt_restart)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs); + int (*fmt_restart_active)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs); + int (*fmt_exit)(struct task_struct *task, void *buf, struct pt_regs *regs); + + struct list_head fmt_list; +} pfm_buffer_fmt_t; + +extern int pfm_register_buffer_fmt(pfm_buffer_fmt_t *fmt); +extern int pfm_unregister_buffer_fmt(pfm_uuid_t uuid); + +/* + * perfmon interface exported to modules + */ +extern int pfm_mod_read_pmds(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs); +extern int pfm_mod_write_pmcs(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs); +extern int pfm_mod_write_ibrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs); +extern int pfm_mod_write_dbrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs); + +/* + * describe the content of the local_cpu_date->pfm_syst_info field + */ +#define PFM_CPUINFO_SYST_WIDE 0x1 /* if set a system wide session exists */ +#define PFM_CPUINFO_DCR_PP 0x2 /* if set the system wide session has started */ +#define PFM_CPUINFO_EXCL_IDLE 0x4 /* the system wide session excludes the idle task */ + +/* + * sysctl control structure. visible to sampling formats + */ +typedef struct { + int debug; /* turn on/off debugging via syslog */ + int debug_ovfl; /* turn on/off debug printk in overflow handler */ + int fastctxsw; /* turn on/off fast (unsecure) ctxsw */ + int expert_mode; /* turn on/off value checking */ +} pfm_sysctl_t; +extern pfm_sysctl_t pfm_sysctl; + + +#endif /* __KERNEL__ */ + +#endif /* _ASM_IA64_PERFMON_H */ diff --git a/arch/ia64/include/asm/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h new file mode 100644 index 000000000000..48822c0811d8 --- /dev/null +++ b/arch/ia64/include/asm/perfmon_default_smpl.h @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2002-2003 Hewlett-Packard Co + * Stephane Eranian + * + * This file implements the default sampling buffer format + * for Linux/ia64 perfmon subsystem. + */ +#ifndef __PERFMON_DEFAULT_SMPL_H__ +#define __PERFMON_DEFAULT_SMPL_H__ 1 + +#define PFM_DEFAULT_SMPL_UUID { \ + 0x4d, 0x72, 0xbe, 0xc0, 0x06, 0x64, 0x41, 0x43, 0x82, 0xb4, 0xd3, 0xfd, 0x27, 0x24, 0x3c, 0x97} + +/* + * format specific parameters (passed at context creation) + */ +typedef struct { + unsigned long buf_size; /* size of the buffer in bytes */ + unsigned int flags; /* buffer specific flags */ + unsigned int res1; /* for future use */ + unsigned long reserved[2]; /* for future use */ +} pfm_default_smpl_arg_t; + +/* + * combined context+format specific structure. Can be passed + * to PFM_CONTEXT_CREATE + */ +typedef struct { + pfarg_context_t ctx_arg; + pfm_default_smpl_arg_t buf_arg; +} pfm_default_smpl_ctx_arg_t; + +/* + * This header is at the beginning of the sampling buffer returned to the user. + * It is directly followed by the first record. + */ +typedef struct { + unsigned long hdr_count; /* how many valid entries */ + unsigned long hdr_cur_offs; /* current offset from top of buffer */ + unsigned long hdr_reserved2; /* reserved for future use */ + + unsigned long hdr_overflows; /* how many times the buffer overflowed */ + unsigned long hdr_buf_size; /* how many bytes in the buffer */ + + unsigned int hdr_version; /* contains perfmon version (smpl format diffs) */ + unsigned int hdr_reserved1; /* for future use */ + unsigned long hdr_reserved[10]; /* for future use */ +} pfm_default_smpl_hdr_t; + +/* + * Entry header in the sampling buffer. The header is directly followed + * with the values of the PMD registers of interest saved in increasing + * index order: PMD4, PMD5, and so on. How many PMDs are present depends + * on how the session was programmed. + * + * In the case where multiple counters overflow at the same time, multiple + * entries are written consecutively. + * + * last_reset_value member indicates the initial value of the overflowed PMD. + */ +typedef struct { + int pid; /* thread id (for NPTL, this is gettid()) */ + unsigned char reserved1[3]; /* reserved for future use */ + unsigned char ovfl_pmd; /* index of overflowed PMD */ + + unsigned long last_reset_val; /* initial value of overflowed PMD */ + unsigned long ip; /* where did the overflow interrupt happened */ + unsigned long tstamp; /* ar.itc when entering perfmon intr. handler */ + + unsigned short cpu; /* cpu on which the overfow occured */ + unsigned short set; /* event set active when overflow ocurred */ + int tgid; /* thread group id (for NPTL, this is getpid()) */ +} pfm_default_smpl_entry_t; + +#define PFM_DEFAULT_MAX_PMDS 64 /* how many pmds supported by data structures (sizeof(unsigned long) */ +#define PFM_DEFAULT_MAX_ENTRY_SIZE (sizeof(pfm_default_smpl_entry_t)+(sizeof(unsigned long)*PFM_DEFAULT_MAX_PMDS)) +#define PFM_DEFAULT_SMPL_MIN_BUF_SIZE (sizeof(pfm_default_smpl_hdr_t)+PFM_DEFAULT_MAX_ENTRY_SIZE) + +#define PFM_DEFAULT_SMPL_VERSION_MAJ 2U +#define PFM_DEFAULT_SMPL_VERSION_MIN 0U +#define PFM_DEFAULT_SMPL_VERSION (((PFM_DEFAULT_SMPL_VERSION_MAJ&0xffff)<<16)|(PFM_DEFAULT_SMPL_VERSION_MIN & 0xffff)) + +#endif /* __PERFMON_DEFAULT_SMPL_H__ */ diff --git a/arch/ia64/include/asm/pgalloc.h b/arch/ia64/include/asm/pgalloc.h new file mode 100644 index 000000000000..b9ac1a6fc216 --- /dev/null +++ b/arch/ia64/include/asm/pgalloc.h @@ -0,0 +1,122 @@ +#ifndef _ASM_IA64_PGALLOC_H +#define _ASM_IA64_PGALLOC_H + +/* + * This file contains the functions and defines necessary to allocate + * page tables. + * + * This hopefully works with any (fixed) ia-64 page-size, as defined + * in (currently 8192). + * + * Copyright (C) 1998-2001 Hewlett-Packard Co + * David Mosberger-Tang + * Copyright (C) 2000, Goutham Rao + */ + + +#include +#include +#include +#include +#include + +#include + +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + return quicklist_alloc(0, GFP_KERNEL, NULL); +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + quicklist_free(0, NULL, pgd); +} + +#ifdef CONFIG_PGTABLE_4 +static inline void +pgd_populate(struct mm_struct *mm, pgd_t * pgd_entry, pud_t * pud) +{ + pgd_val(*pgd_entry) = __pa(pud); +} + +static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + return quicklist_alloc(0, GFP_KERNEL, NULL); +} + +static inline void pud_free(struct mm_struct *mm, pud_t *pud) +{ + quicklist_free(0, NULL, pud); +} +#define __pud_free_tlb(tlb, pud) pud_free((tlb)->mm, pud) +#endif /* CONFIG_PGTABLE_4 */ + +static inline void +pud_populate(struct mm_struct *mm, pud_t * pud_entry, pmd_t * pmd) +{ + pud_val(*pud_entry) = __pa(pmd); +} + +static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + return quicklist_alloc(0, GFP_KERNEL, NULL); +} + +static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) +{ + quicklist_free(0, NULL, pmd); +} + +#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd) + +static inline void +pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, pgtable_t pte) +{ + pmd_val(*pmd_entry) = page_to_phys(pte); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +static inline void +pmd_populate_kernel(struct mm_struct *mm, pmd_t * pmd_entry, pte_t * pte) +{ + pmd_val(*pmd_entry) = __pa(pte); +} + +static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + struct page *page; + void *pg; + + pg = quicklist_alloc(0, GFP_KERNEL, NULL); + if (!pg) + return NULL; + page = virt_to_page(pg); + pgtable_page_ctor(page); + return page; +} + +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long addr) +{ + return quicklist_alloc(0, GFP_KERNEL, NULL); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t pte) +{ + pgtable_page_dtor(pte); + quicklist_free_page(0, NULL, pte); +} + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + quicklist_free(0, NULL, pte); +} + +static inline void check_pgt_cache(void) +{ + quicklist_trim(0, NULL, 25, 16); +} + +#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) + +#endif /* _ASM_IA64_PGALLOC_H */ diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h new file mode 100644 index 000000000000..7a9bff47564f --- /dev/null +++ b/arch/ia64/include/asm/pgtable.h @@ -0,0 +1,615 @@ +#ifndef _ASM_IA64_PGTABLE_H +#define _ASM_IA64_PGTABLE_H + +/* + * This file contains the functions and defines necessary to modify and use + * the IA-64 page table tree. + * + * This hopefully works with any (fixed) IA-64 page-size, as defined + * in . + * + * Copyright (C) 1998-2005 Hewlett-Packard Co + * David Mosberger-Tang + */ + + +#include +#include +#include +#include +#include + +#define IA64_MAX_PHYS_BITS 50 /* max. number of physical address bits (architected) */ + +/* + * First, define the various bits in a PTE. Note that the PTE format + * matches the VHPT short format, the firt doubleword of the VHPD long + * format, and the first doubleword of the TLB insertion format. + */ +#define _PAGE_P_BIT 0 +#define _PAGE_A_BIT 5 +#define _PAGE_D_BIT 6 + +#define _PAGE_P (1 << _PAGE_P_BIT) /* page present bit */ +#define _PAGE_MA_WB (0x0 << 2) /* write back memory attribute */ +#define _PAGE_MA_UC (0x4 << 2) /* uncacheable memory attribute */ +#define _PAGE_MA_UCE (0x5 << 2) /* UC exported attribute */ +#define _PAGE_MA_WC (0x6 << 2) /* write coalescing memory attribute */ +#define _PAGE_MA_NAT (0x7 << 2) /* not-a-thing attribute */ +#define _PAGE_MA_MASK (0x7 << 2) +#define _PAGE_PL_0 (0 << 7) /* privilege level 0 (kernel) */ +#define _PAGE_PL_1 (1 << 7) /* privilege level 1 (unused) */ +#define _PAGE_PL_2 (2 << 7) /* privilege level 2 (unused) */ +#define _PAGE_PL_3 (3 << 7) /* privilege level 3 (user) */ +#define _PAGE_PL_MASK (3 << 7) +#define _PAGE_AR_R (0 << 9) /* read only */ +#define _PAGE_AR_RX (1 << 9) /* read & execute */ +#define _PAGE_AR_RW (2 << 9) /* read & write */ +#define _PAGE_AR_RWX (3 << 9) /* read, write & execute */ +#define _PAGE_AR_R_RW (4 << 9) /* read / read & write */ +#define _PAGE_AR_RX_RWX (5 << 9) /* read & exec / read, write & exec */ +#define _PAGE_AR_RWX_RW (6 << 9) /* read, write & exec / read & write */ +#define _PAGE_AR_X_RX (7 << 9) /* exec & promote / read & exec */ +#define _PAGE_AR_MASK (7 << 9) +#define _PAGE_AR_SHIFT 9 +#define _PAGE_A (1 << _PAGE_A_BIT) /* page accessed bit */ +#define _PAGE_D (1 << _PAGE_D_BIT) /* page dirty bit */ +#define _PAGE_PPN_MASK (((__IA64_UL(1) << IA64_MAX_PHYS_BITS) - 1) & ~0xfffUL) +#define _PAGE_ED (__IA64_UL(1) << 52) /* exception deferral */ +#define _PAGE_PROTNONE (__IA64_UL(1) << 63) + +/* Valid only for a PTE with the present bit cleared: */ +#define _PAGE_FILE (1 << 1) /* see swap & file pte remarks below */ + +#define _PFN_MASK _PAGE_PPN_MASK +/* Mask of bits which may be changed by pte_modify(); the odd bits are there for _PAGE_PROTNONE */ +#define _PAGE_CHG_MASK (_PAGE_P | _PAGE_PROTNONE | _PAGE_PL_MASK | _PAGE_AR_MASK | _PAGE_ED) + +#define _PAGE_SIZE_4K 12 +#define _PAGE_SIZE_8K 13 +#define _PAGE_SIZE_16K 14 +#define _PAGE_SIZE_64K 16 +#define _PAGE_SIZE_256K 18 +#define _PAGE_SIZE_1M 20 +#define _PAGE_SIZE_4M 22 +#define _PAGE_SIZE_16M 24 +#define _PAGE_SIZE_64M 26 +#define _PAGE_SIZE_256M 28 +#define _PAGE_SIZE_1G 30 +#define _PAGE_SIZE_4G 32 + +#define __ACCESS_BITS _PAGE_ED | _PAGE_A | _PAGE_P | _PAGE_MA_WB +#define __DIRTY_BITS_NO_ED _PAGE_A | _PAGE_P | _PAGE_D | _PAGE_MA_WB +#define __DIRTY_BITS _PAGE_ED | __DIRTY_BITS_NO_ED + +/* + * How many pointers will a page table level hold expressed in shift + */ +#define PTRS_PER_PTD_SHIFT (PAGE_SHIFT-3) + +/* + * Definitions for fourth level: + */ +#define PTRS_PER_PTE (__IA64_UL(1) << (PTRS_PER_PTD_SHIFT)) + +/* + * Definitions for third level: + * + * PMD_SHIFT determines the size of the area a third-level page table + * can map. + */ +#define PMD_SHIFT (PAGE_SHIFT + (PTRS_PER_PTD_SHIFT)) +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) +#define PTRS_PER_PMD (1UL << (PTRS_PER_PTD_SHIFT)) + +#ifdef CONFIG_PGTABLE_4 +/* + * Definitions for second level: + * + * PUD_SHIFT determines the size of the area a second-level page table + * can map. + */ +#define PUD_SHIFT (PMD_SHIFT + (PTRS_PER_PTD_SHIFT)) +#define PUD_SIZE (1UL << PUD_SHIFT) +#define PUD_MASK (~(PUD_SIZE-1)) +#define PTRS_PER_PUD (1UL << (PTRS_PER_PTD_SHIFT)) +#endif + +/* + * Definitions for first level: + * + * PGDIR_SHIFT determines what a first-level page table entry can map. + */ +#ifdef CONFIG_PGTABLE_4 +#define PGDIR_SHIFT (PUD_SHIFT + (PTRS_PER_PTD_SHIFT)) +#else +#define PGDIR_SHIFT (PMD_SHIFT + (PTRS_PER_PTD_SHIFT)) +#endif +#define PGDIR_SIZE (__IA64_UL(1) << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) +#define PTRS_PER_PGD_SHIFT PTRS_PER_PTD_SHIFT +#define PTRS_PER_PGD (1UL << PTRS_PER_PGD_SHIFT) +#define USER_PTRS_PER_PGD (5*PTRS_PER_PGD/8) /* regions 0-4 are user regions */ +#define FIRST_USER_ADDRESS 0 + +/* + * All the normal masks have the "page accessed" bits on, as any time + * they are used, the page is accessed. They are cleared only by the + * page-out routines. + */ +#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_A) +#define PAGE_SHARED __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RW) +#define PAGE_READONLY __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R) +#define PAGE_COPY __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R) +#define PAGE_COPY_EXEC __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX) +#define PAGE_GATE __pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_X_RX) +#define PAGE_KERNEL __pgprot(__DIRTY_BITS | _PAGE_PL_0 | _PAGE_AR_RWX) +#define PAGE_KERNELRX __pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_RX) + +# ifndef __ASSEMBLY__ + +#include /* for mm_struct */ +#include +#include +#include +#include + +/* + * Next come the mappings that determine how mmap() protection bits + * (PROT_EXEC, PROT_READ, PROT_WRITE, PROT_NONE) get implemented. The + * _P version gets used for a private shared memory segment, the _S + * version gets used for a shared memory segment with MAP_SHARED on. + * In a private shared memory segment, we do a copy-on-write if a task + * attempts to write to the page. + */ + /* xwr */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_READONLY /* write to priv pg -> copy & make writable */ +#define __P011 PAGE_READONLY /* ditto */ +#define __P100 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX) +#define __P101 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX) +#define __P110 PAGE_COPY_EXEC +#define __P111 PAGE_COPY_EXEC + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_SHARED /* we don't have (and don't need) write-only */ +#define __S011 PAGE_SHARED +#define __S100 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX) +#define __S101 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX) +#define __S110 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX) +#define __S111 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX) + +#define pgd_ERROR(e) printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e)) +#ifdef CONFIG_PGTABLE_4 +#define pud_ERROR(e) printk("%s:%d: bad pud %016lx.\n", __FILE__, __LINE__, pud_val(e)) +#endif +#define pmd_ERROR(e) printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e)) +#define pte_ERROR(e) printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e)) + + +/* + * Some definitions to translate between mem_map, PTEs, and page addresses: + */ + + +/* Quick test to see if ADDR is a (potentially) valid physical address. */ +static inline long +ia64_phys_addr_valid (unsigned long addr) +{ + return (addr & (local_cpu_data->unimpl_pa_mask)) == 0; +} + +/* + * kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel + * memory. For the return value to be meaningful, ADDR must be >= + * PAGE_OFFSET. This operation can be relatively expensive (e.g., + * require a hash-, or multi-level tree-lookup or something of that + * sort) but it guarantees to return TRUE only if accessing the page + * at that address does not cause an error. Note that there may be + * addresses for which kern_addr_valid() returns FALSE even though an + * access would not cause an error (e.g., this is typically true for + * memory mapped I/O regions. + * + * XXX Need to implement this for IA-64. + */ +#define kern_addr_valid(addr) (1) + + +/* + * Now come the defines and routines to manage and access the three-level + * page table. + */ + + +#define VMALLOC_START (RGN_BASE(RGN_GATE) + 0x200000000UL) +#ifdef CONFIG_VIRTUAL_MEM_MAP +# define VMALLOC_END_INIT (RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 9))) +# define VMALLOC_END vmalloc_end + extern unsigned long vmalloc_end; +#else +#if defined(CONFIG_SPARSEMEM) && defined(CONFIG_SPARSEMEM_VMEMMAP) +/* SPARSEMEM_VMEMMAP uses half of vmalloc... */ +# define VMALLOC_END (RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 10))) +# define vmemmap ((struct page *)VMALLOC_END) +#else +# define VMALLOC_END (RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 9))) +#endif +#endif + +/* fs/proc/kcore.c */ +#define kc_vaddr_to_offset(v) ((v) - RGN_BASE(RGN_GATE)) +#define kc_offset_to_vaddr(o) ((o) + RGN_BASE(RGN_GATE)) + +#define RGN_MAP_SHIFT (PGDIR_SHIFT + PTRS_PER_PGD_SHIFT - 3) +#define RGN_MAP_LIMIT ((1UL << RGN_MAP_SHIFT) - PAGE_SIZE) /* per region addr limit */ + +/* + * Conversion functions: convert page frame number (pfn) and a protection value to a page + * table entry (pte). + */ +#define pfn_pte(pfn, pgprot) \ +({ pte_t __pte; pte_val(__pte) = ((pfn) << PAGE_SHIFT) | pgprot_val(pgprot); __pte; }) + +/* Extract pfn from pte. */ +#define pte_pfn(_pte) ((pte_val(_pte) & _PFN_MASK) >> PAGE_SHIFT) + +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) + +/* This takes a physical page address that is used by the remapping functions */ +#define mk_pte_phys(physpage, pgprot) \ +({ pte_t __pte; pte_val(__pte) = physpage + pgprot_val(pgprot); __pte; }) + +#define pte_modify(_pte, newprot) \ + (__pte((pte_val(_pte) & ~_PAGE_CHG_MASK) | (pgprot_val(newprot) & _PAGE_CHG_MASK))) + +#define pte_none(pte) (!pte_val(pte)) +#define pte_present(pte) (pte_val(pte) & (_PAGE_P | _PAGE_PROTNONE)) +#define pte_clear(mm,addr,pte) (pte_val(*(pte)) = 0UL) +/* pte_page() returns the "struct page *" corresponding to the PTE: */ +#define pte_page(pte) virt_to_page(((pte_val(pte) & _PFN_MASK) + PAGE_OFFSET)) + +#define pmd_none(pmd) (!pmd_val(pmd)) +#define pmd_bad(pmd) (!ia64_phys_addr_valid(pmd_val(pmd))) +#define pmd_present(pmd) (pmd_val(pmd) != 0UL) +#define pmd_clear(pmdp) (pmd_val(*(pmdp)) = 0UL) +#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val(pmd) & _PFN_MASK)) +#define pmd_page(pmd) virt_to_page((pmd_val(pmd) + PAGE_OFFSET)) + +#define pud_none(pud) (!pud_val(pud)) +#define pud_bad(pud) (!ia64_phys_addr_valid(pud_val(pud))) +#define pud_present(pud) (pud_val(pud) != 0UL) +#define pud_clear(pudp) (pud_val(*(pudp)) = 0UL) +#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & _PFN_MASK)) +#define pud_page(pud) virt_to_page((pud_val(pud) + PAGE_OFFSET)) + +#ifdef CONFIG_PGTABLE_4 +#define pgd_none(pgd) (!pgd_val(pgd)) +#define pgd_bad(pgd) (!ia64_phys_addr_valid(pgd_val(pgd))) +#define pgd_present(pgd) (pgd_val(pgd) != 0UL) +#define pgd_clear(pgdp) (pgd_val(*(pgdp)) = 0UL) +#define pgd_page_vaddr(pgd) ((unsigned long) __va(pgd_val(pgd) & _PFN_MASK)) +#define pgd_page(pgd) virt_to_page((pgd_val(pgd) + PAGE_OFFSET)) +#endif + +/* + * The following have defined behavior only work if pte_present() is true. + */ +#define pte_write(pte) ((unsigned) (((pte_val(pte) & _PAGE_AR_MASK) >> _PAGE_AR_SHIFT) - 2) <= 4) +#define pte_exec(pte) ((pte_val(pte) & _PAGE_AR_RX) != 0) +#define pte_dirty(pte) ((pte_val(pte) & _PAGE_D) != 0) +#define pte_young(pte) ((pte_val(pte) & _PAGE_A) != 0) +#define pte_file(pte) ((pte_val(pte) & _PAGE_FILE) != 0) +#define pte_special(pte) 0 + +/* + * Note: we convert AR_RWX to AR_RX and AR_RW to AR_R by clearing the 2nd bit in the + * access rights: + */ +#define pte_wrprotect(pte) (__pte(pte_val(pte) & ~_PAGE_AR_RW)) +#define pte_mkwrite(pte) (__pte(pte_val(pte) | _PAGE_AR_RW)) +#define pte_mkold(pte) (__pte(pte_val(pte) & ~_PAGE_A)) +#define pte_mkyoung(pte) (__pte(pte_val(pte) | _PAGE_A)) +#define pte_mkclean(pte) (__pte(pte_val(pte) & ~_PAGE_D)) +#define pte_mkdirty(pte) (__pte(pte_val(pte) | _PAGE_D)) +#define pte_mkhuge(pte) (__pte(pte_val(pte))) +#define pte_mkspecial(pte) (pte) + +/* + * Because ia64's Icache and Dcache is not coherent (on a cpu), we need to + * sync icache and dcache when we insert *new* executable page. + * __ia64_sync_icache_dcache() check Pg_arch_1 bit and flush icache + * if necessary. + * + * set_pte() is also called by the kernel, but we can expect that the kernel + * flushes icache explicitly if necessary. + */ +#define pte_present_exec_user(pte)\ + ((pte_val(pte) & (_PAGE_P | _PAGE_PL_MASK | _PAGE_AR_RX)) == \ + (_PAGE_P | _PAGE_PL_3 | _PAGE_AR_RX)) + +extern void __ia64_sync_icache_dcache(pte_t pteval); +static inline void set_pte(pte_t *ptep, pte_t pteval) +{ + /* page is present && page is user && page is executable + * && (page swapin or new page or page migraton + * || copy_on_write with page copying.) + */ + if (pte_present_exec_user(pteval) && + (!pte_present(*ptep) || + pte_pfn(*ptep) != pte_pfn(pteval))) + /* load_module() calles flush_icache_range() explicitly*/ + __ia64_sync_icache_dcache(pteval); + *ptep = pteval; +} + +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +/* + * Make page protection values cacheable, uncacheable, or write- + * combining. Note that "protection" is really a misnomer here as the + * protection value contains the memory attribute bits, dirty bits, and + * various other bits as well. + */ +#define pgprot_cacheable(prot) __pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_WB) +#define pgprot_noncached(prot) __pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_UC) +#define pgprot_writecombine(prot) __pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_WC) + +struct file; +extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot); +#define __HAVE_PHYS_MEM_ACCESS_PROT + +static inline unsigned long +pgd_index (unsigned long address) +{ + unsigned long region = address >> 61; + unsigned long l1index = (address >> PGDIR_SHIFT) & ((PTRS_PER_PGD >> 3) - 1); + + return (region << (PAGE_SHIFT - 6)) | l1index; +} + +/* The offset in the 1-level directory is given by the 3 region bits + (61..63) and the level-1 bits. */ +static inline pgd_t* +pgd_offset (const struct mm_struct *mm, unsigned long address) +{ + return mm->pgd + pgd_index(address); +} + +/* In the kernel's mapped region we completely ignore the region number + (since we know it's in region number 5). */ +#define pgd_offset_k(addr) \ + (init_mm.pgd + (((addr) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))) + +/* Look up a pgd entry in the gate area. On IA-64, the gate-area + resides in the kernel-mapped segment, hence we use pgd_offset_k() + here. */ +#define pgd_offset_gate(mm, addr) pgd_offset_k(addr) + +#ifdef CONFIG_PGTABLE_4 +/* Find an entry in the second-level page table.. */ +#define pud_offset(dir,addr) \ + ((pud_t *) pgd_page_vaddr(*(dir)) + (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))) +#endif + +/* Find an entry in the third-level page table.. */ +#define pmd_offset(dir,addr) \ + ((pmd_t *) pud_page_vaddr(*(dir)) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))) + +/* + * Find an entry in the third-level page table. This looks more complicated than it + * should be because some platforms place page tables in high memory. + */ +#define pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset_kernel(dir,addr) ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr)) +#define pte_offset_map(dir,addr) pte_offset_kernel(dir, addr) +#define pte_offset_map_nested(dir,addr) pte_offset_map(dir, addr) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +/* atomic versions of the some PTE manipulations: */ + +static inline int +ptep_test_and_clear_young (struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) +{ +#ifdef CONFIG_SMP + if (!pte_young(*ptep)) + return 0; + return test_and_clear_bit(_PAGE_A_BIT, ptep); +#else + pte_t pte = *ptep; + if (!pte_young(pte)) + return 0; + set_pte_at(vma->vm_mm, addr, ptep, pte_mkold(pte)); + return 1; +#endif +} + +static inline pte_t +ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ +#ifdef CONFIG_SMP + return __pte(xchg((long *) ptep, 0)); +#else + pte_t pte = *ptep; + pte_clear(mm, addr, ptep); + return pte; +#endif +} + +static inline void +ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ +#ifdef CONFIG_SMP + unsigned long new, old; + + do { + old = pte_val(*ptep); + new = pte_val(pte_wrprotect(__pte (old))); + } while (cmpxchg((unsigned long *) ptep, old, new) != old); +#else + pte_t old_pte = *ptep; + set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte)); +#endif +} + +static inline int +pte_same (pte_t a, pte_t b) +{ + return pte_val(a) == pte_val(b); +} + +#define update_mmu_cache(vma, address, pte) do { } while (0) + +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; +extern void paging_init (void); + +/* + * Note: The macros below rely on the fact that MAX_SWAPFILES_SHIFT <= number of + * bits in the swap-type field of the swap pte. It would be nice to + * enforce that, but we can't easily include here. + * (Of course, better still would be to define MAX_SWAPFILES_SHIFT here...). + * + * Format of swap pte: + * bit 0 : present bit (must be zero) + * bit 1 : _PAGE_FILE (must be zero) + * bits 2- 8: swap-type + * bits 9-62: swap offset + * bit 63 : _PAGE_PROTNONE bit + * + * Format of file pte: + * bit 0 : present bit (must be zero) + * bit 1 : _PAGE_FILE (must be one) + * bits 2-62: file_offset/PAGE_SIZE + * bit 63 : _PAGE_PROTNONE bit + */ +#define __swp_type(entry) (((entry).val >> 2) & 0x7f) +#define __swp_offset(entry) (((entry).val << 1) >> 10) +#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((long) (offset) << 9) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +#define PTE_FILE_MAX_BITS 61 +#define pte_to_pgoff(pte) ((pte_val(pte) << 1) >> 3) +#define pgoff_to_pte(off) ((pte_t) { ((off) << 2) | _PAGE_FILE }) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)]; +extern struct page *zero_page_memmap_ptr; +#define ZERO_PAGE(vaddr) (zero_page_memmap_ptr) + +/* We provide our own get_unmapped_area to cope with VA holes for userland */ +#define HAVE_ARCH_UNMAPPED_AREA + +#ifdef CONFIG_HUGETLB_PAGE +#define HUGETLB_PGDIR_SHIFT (HPAGE_SHIFT + 2*(PAGE_SHIFT-3)) +#define HUGETLB_PGDIR_SIZE (__IA64_UL(1) << HUGETLB_PGDIR_SHIFT) +#define HUGETLB_PGDIR_MASK (~(HUGETLB_PGDIR_SIZE-1)) +#endif + + +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +/* + * Update PTEP with ENTRY, which is guaranteed to be a less + * restrictive PTE. That is, ENTRY may have the ACCESSED, DIRTY, and + * WRITABLE bits turned on, when the value at PTEP did not. The + * WRITABLE bit may only be turned if SAFELY_WRITABLE is TRUE. + * + * SAFELY_WRITABLE is TRUE if we can update the value at PTEP without + * having to worry about races. On SMP machines, there are only two + * cases where this is true: + * + * (1) *PTEP has the PRESENT bit turned OFF + * (2) ENTRY has the DIRTY bit turned ON + * + * On ia64, we could implement this routine with a cmpxchg()-loop + * which ORs in the _PAGE_A/_PAGE_D bit if they're set in ENTRY. + * However, like on x86, we can get a more streamlined version by + * observing that it is OK to drop ACCESSED bit updates when + * SAFELY_WRITABLE is FALSE. Besides being rare, all that would do is + * result in an extra Access-bit fault, which would then turn on the + * ACCESSED bit in the low-level fault handler (iaccess_bit or + * daccess_bit in ivt.S). + */ +#ifdef CONFIG_SMP +# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable) \ +({ \ + int __changed = !pte_same(*(__ptep), __entry); \ + if (__changed && __safely_writable) { \ + set_pte(__ptep, __entry); \ + flush_tlb_page(__vma, __addr); \ + } \ + __changed; \ +}) +#else +# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable) \ +({ \ + int __changed = !pte_same(*(__ptep), __entry); \ + if (__changed) { \ + set_pte_at((__vma)->vm_mm, (__addr), __ptep, __entry); \ + flush_tlb_page(__vma, __addr); \ + } \ + __changed; \ +}) +#endif + +# ifdef CONFIG_VIRTUAL_MEM_MAP + /* arch mem_map init routine is needed due to holes in a virtual mem_map */ +# define __HAVE_ARCH_MEMMAP_INIT + extern void memmap_init (unsigned long size, int nid, unsigned long zone, + unsigned long start_pfn); +# endif /* CONFIG_VIRTUAL_MEM_MAP */ +# endif /* !__ASSEMBLY__ */ + +/* + * Identity-mapped regions use a large page size. We'll call such large pages + * "granules". If you can think of a better name that's unambiguous, let me + * know... + */ +#if defined(CONFIG_IA64_GRANULE_64MB) +# define IA64_GRANULE_SHIFT _PAGE_SIZE_64M +#elif defined(CONFIG_IA64_GRANULE_16MB) +# define IA64_GRANULE_SHIFT _PAGE_SIZE_16M +#endif +#define IA64_GRANULE_SIZE (1 << IA64_GRANULE_SHIFT) +/* + * log2() of the page size we use to map the kernel image (IA64_TR_KERNEL): + */ +#define KERNEL_TR_PAGE_SHIFT _PAGE_SIZE_64M +#define KERNEL_TR_PAGE_SIZE (1 << KERNEL_TR_PAGE_SHIFT) + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +/* These tell get_user_pages() that the first gate page is accessible from user-level. */ +#define FIXADDR_USER_START GATE_ADDR +#ifdef HAVE_BUGGY_SEGREL +# define FIXADDR_USER_END (GATE_ADDR + 2*PAGE_SIZE) +#else +# define FIXADDR_USER_END (GATE_ADDR + 2*PERCPU_PAGE_SIZE) +#endif + +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +#define __HAVE_ARCH_PTE_SAME +#define __HAVE_ARCH_PGD_OFFSET_GATE + + +#ifndef CONFIG_PGTABLE_4 +#include +#endif +#include + +#endif /* _ASM_IA64_PGTABLE_H */ diff --git a/arch/ia64/include/asm/poll.h b/arch/ia64/include/asm/poll.h new file mode 100644 index 000000000000..c98509d3149e --- /dev/null +++ b/arch/ia64/include/asm/poll.h @@ -0,0 +1 @@ +#include diff --git a/arch/ia64/include/asm/posix_types.h b/arch/ia64/include/asm/posix_types.h new file mode 100644 index 000000000000..17885567b731 --- /dev/null +++ b/arch/ia64/include/asm/posix_types.h @@ -0,0 +1,126 @@ +#ifndef _ASM_IA64_POSIX_TYPES_H +#define _ASM_IA64_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + * + * Based on . + * + * Modified 1998-2000, 2003 + * David Mosberger-Tang , Hewlett-Packard Co + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned int __kernel_mode_t; +typedef unsigned int __kernel_nlink_t; +typedef long __kernel_off_t; +typedef long long __kernel_loff_t; +typedef int __kernel_pid_t; +typedef int __kernel_ipc_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; +typedef long __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned long __kernel_sigset_t; /* at least 32 bits */ +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +typedef __kernel_uid_t __kernel_old_uid_t; +typedef __kernel_gid_t __kernel_old_gid_t; +typedef __kernel_uid_t __kernel_uid32_t; +typedef __kernel_gid_t __kernel_gid32_t; + +typedef unsigned int __kernel_old_dev_t; + +# ifdef __KERNEL__ + +# ifndef __GNUC__ + +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) +#define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0) +#define __FD_ZERO(set) \ + ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set))) + +# else /* !__GNUC__ */ + +/* With GNU C, use inline functions instead so args are evaluated only once: */ + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] |= (1UL<<_rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); +} + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long fd, const __kernel_fd_set *p) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *p) +{ + unsigned long *tmp = p->fds_bits; + int i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; + tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0; + tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0; + return; + + case 8: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; + return; + + case 4: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + return; + } + } + i = __FDSET_LONGS; + while (i) { + i--; + *tmp = 0; + tmp++; + } +} + +# endif /* !__GNUC__ */ +# endif /* __KERNEL__ */ +#endif /* _ASM_IA64_POSIX_TYPES_H */ diff --git a/arch/ia64/include/asm/processor.h b/arch/ia64/include/asm/processor.h new file mode 100644 index 000000000000..f88fa054d01d --- /dev/null +++ b/arch/ia64/include/asm/processor.h @@ -0,0 +1,771 @@ +#ifndef _ASM_IA64_PROCESSOR_H +#define _ASM_IA64_PROCESSOR_H + +/* + * Copyright (C) 1998-2004 Hewlett-Packard Co + * David Mosberger-Tang + * Stephane Eranian + * Copyright (C) 1999 Asit Mallick + * Copyright (C) 1999 Don Dugger + * + * 11/24/98 S.Eranian added ia64_set_iva() + * 12/03/99 D. Mosberger implement thread_saved_pc() via kernel unwind API + * 06/16/00 A. Mallick added csd/ssd/tssd for ia32 support + */ + + +#include +#include +#include +#include + +#define IA64_NUM_PHYS_STACK_REG 96 +#define IA64_NUM_DBG_REGS 8 + +#define DEFAULT_MAP_BASE __IA64_UL_CONST(0x2000000000000000) +#define DEFAULT_TASK_SIZE __IA64_UL_CONST(0xa000000000000000) + +/* + * TASK_SIZE really is a mis-named. It really is the maximum user + * space address (plus one). On IA-64, there are five regions of 2TB + * each (assuming 8KB page size), for a total of 8TB of user virtual + * address space. + */ +#define TASK_SIZE_OF(tsk) ((tsk)->thread.task_size) +#define TASK_SIZE TASK_SIZE_OF(current) + +/* + * This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (current->thread.map_base) + +#define IA64_THREAD_FPH_VALID (__IA64_UL(1) << 0) /* floating-point high state valid? */ +#define IA64_THREAD_DBG_VALID (__IA64_UL(1) << 1) /* debug registers valid? */ +#define IA64_THREAD_PM_VALID (__IA64_UL(1) << 2) /* performance registers valid? */ +#define IA64_THREAD_UAC_NOPRINT (__IA64_UL(1) << 3) /* don't log unaligned accesses */ +#define IA64_THREAD_UAC_SIGBUS (__IA64_UL(1) << 4) /* generate SIGBUS on unaligned acc. */ +#define IA64_THREAD_MIGRATION (__IA64_UL(1) << 5) /* require migration + sync at ctx sw */ +#define IA64_THREAD_FPEMU_NOPRINT (__IA64_UL(1) << 6) /* don't log any fpswa faults */ +#define IA64_THREAD_FPEMU_SIGFPE (__IA64_UL(1) << 7) /* send a SIGFPE for fpswa faults */ + +#define IA64_THREAD_UAC_SHIFT 3 +#define IA64_THREAD_UAC_MASK (IA64_THREAD_UAC_NOPRINT | IA64_THREAD_UAC_SIGBUS) +#define IA64_THREAD_FPEMU_SHIFT 6 +#define IA64_THREAD_FPEMU_MASK (IA64_THREAD_FPEMU_NOPRINT | IA64_THREAD_FPEMU_SIGFPE) + + +/* + * This shift should be large enough to be able to represent 1000000000/itc_freq with good + * accuracy while being small enough to fit 10*1000000000< +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_NUMA +#include +#endif + +/* like above but expressed as bitfields for more efficient access: */ +struct ia64_psr { + __u64 reserved0 : 1; + __u64 be : 1; + __u64 up : 1; + __u64 ac : 1; + __u64 mfl : 1; + __u64 mfh : 1; + __u64 reserved1 : 7; + __u64 ic : 1; + __u64 i : 1; + __u64 pk : 1; + __u64 reserved2 : 1; + __u64 dt : 1; + __u64 dfl : 1; + __u64 dfh : 1; + __u64 sp : 1; + __u64 pp : 1; + __u64 di : 1; + __u64 si : 1; + __u64 db : 1; + __u64 lp : 1; + __u64 tb : 1; + __u64 rt : 1; + __u64 reserved3 : 4; + __u64 cpl : 2; + __u64 is : 1; + __u64 mc : 1; + __u64 it : 1; + __u64 id : 1; + __u64 da : 1; + __u64 dd : 1; + __u64 ss : 1; + __u64 ri : 2; + __u64 ed : 1; + __u64 bn : 1; + __u64 reserved4 : 19; +}; + +union ia64_isr { + __u64 val; + struct { + __u64 code : 16; + __u64 vector : 8; + __u64 reserved1 : 8; + __u64 x : 1; + __u64 w : 1; + __u64 r : 1; + __u64 na : 1; + __u64 sp : 1; + __u64 rs : 1; + __u64 ir : 1; + __u64 ni : 1; + __u64 so : 1; + __u64 ei : 2; + __u64 ed : 1; + __u64 reserved2 : 20; + }; +}; + +union ia64_lid { + __u64 val; + struct { + __u64 rv : 16; + __u64 eid : 8; + __u64 id : 8; + __u64 ig : 32; + }; +}; + +union ia64_tpr { + __u64 val; + struct { + __u64 ig0 : 4; + __u64 mic : 4; + __u64 rsv : 8; + __u64 mmi : 1; + __u64 ig1 : 47; + }; +}; + +union ia64_itir { + __u64 val; + struct { + __u64 rv3 : 2; /* 0-1 */ + __u64 ps : 6; /* 2-7 */ + __u64 key : 24; /* 8-31 */ + __u64 rv4 : 32; /* 32-63 */ + }; +}; + +union ia64_rr { + __u64 val; + struct { + __u64 ve : 1; /* enable hw walker */ + __u64 reserved0: 1; /* reserved */ + __u64 ps : 6; /* log page size */ + __u64 rid : 24; /* region id */ + __u64 reserved1: 32; /* reserved */ + }; +}; + +/* + * CPU type, hardware bug flags, and per-CPU state. Frequently used + * state comes earlier: + */ +struct cpuinfo_ia64 { + __u32 softirq_pending; + __u64 itm_delta; /* # of clock cycles between clock ticks */ + __u64 itm_next; /* interval timer mask value to use for next clock tick */ + __u64 nsec_per_cyc; /* (1000000000<thread.flags = (((task)->thread.flags & ~IA64_THREAD_UAC_MASK) \ + | (((value) << IA64_THREAD_UAC_SHIFT) & IA64_THREAD_UAC_MASK)); \ + 0; \ +}) +#define GET_UNALIGN_CTL(task,addr) \ +({ \ + put_user(((task)->thread.flags & IA64_THREAD_UAC_MASK) >> IA64_THREAD_UAC_SHIFT, \ + (int __user *) (addr)); \ +}) + +#define SET_FPEMU_CTL(task,value) \ +({ \ + (task)->thread.flags = (((task)->thread.flags & ~IA64_THREAD_FPEMU_MASK) \ + | (((value) << IA64_THREAD_FPEMU_SHIFT) & IA64_THREAD_FPEMU_MASK)); \ + 0; \ +}) +#define GET_FPEMU_CTL(task,addr) \ +({ \ + put_user(((task)->thread.flags & IA64_THREAD_FPEMU_MASK) >> IA64_THREAD_FPEMU_SHIFT, \ + (int __user *) (addr)); \ +}) + +#ifdef CONFIG_IA32_SUPPORT +struct desc_struct { + unsigned int a, b; +}; + +#define desc_empty(desc) (!((desc)->a | (desc)->b)) +#define desc_equal(desc1, desc2) (((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b)) + +#define GDT_ENTRY_TLS_ENTRIES 3 +#define GDT_ENTRY_TLS_MIN 6 +#define GDT_ENTRY_TLS_MAX (GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1) + +#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8) + +struct ia64_partial_page_list; +#endif + +struct thread_struct { + __u32 flags; /* various thread flags (see IA64_THREAD_*) */ + /* writing on_ustack is performance-critical, so it's worth spending 8 bits on it... */ + __u8 on_ustack; /* executing on user-stacks? */ + __u8 pad[3]; + __u64 ksp; /* kernel stack pointer */ + __u64 map_base; /* base address for get_unmapped_area() */ + __u64 task_size; /* limit for task size */ + __u64 rbs_bot; /* the base address for the RBS */ + int last_fph_cpu; /* CPU that may hold the contents of f32-f127 */ + +#ifdef CONFIG_IA32_SUPPORT + __u64 eflag; /* IA32 EFLAGS reg */ + __u64 fsr; /* IA32 floating pt status reg */ + __u64 fcr; /* IA32 floating pt control reg */ + __u64 fir; /* IA32 fp except. instr. reg */ + __u64 fdr; /* IA32 fp except. data reg */ + __u64 old_k1; /* old value of ar.k1 */ + __u64 old_iob; /* old IOBase value */ + struct ia64_partial_page_list *ppl; /* partial page list for 4K page size issue */ + /* cached TLS descriptors. */ + struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES]; + +# define INIT_THREAD_IA32 .eflag = 0, \ + .fsr = 0, \ + .fcr = 0x17800000037fULL, \ + .fir = 0, \ + .fdr = 0, \ + .old_k1 = 0, \ + .old_iob = 0, \ + .ppl = NULL, +#else +# define INIT_THREAD_IA32 +#endif /* CONFIG_IA32_SUPPORT */ +#ifdef CONFIG_PERFMON + void *pfm_context; /* pointer to detailed PMU context */ + unsigned long pfm_needs_checking; /* when >0, pending perfmon work on kernel exit */ +# define INIT_THREAD_PM .pfm_context = NULL, \ + .pfm_needs_checking = 0UL, +#else +# define INIT_THREAD_PM +#endif + __u64 dbr[IA64_NUM_DBG_REGS]; + __u64 ibr[IA64_NUM_DBG_REGS]; + struct ia64_fpreg fph[96]; /* saved/loaded on demand */ +}; + +#define INIT_THREAD { \ + .flags = 0, \ + .on_ustack = 0, \ + .ksp = 0, \ + .map_base = DEFAULT_MAP_BASE, \ + .rbs_bot = STACK_TOP - DEFAULT_USER_STACK_SIZE, \ + .task_size = DEFAULT_TASK_SIZE, \ + .last_fph_cpu = -1, \ + INIT_THREAD_IA32 \ + INIT_THREAD_PM \ + .dbr = {0, }, \ + .ibr = {0, }, \ + .fph = {{{{0}}}, } \ +} + +#define start_thread(regs,new_ip,new_sp) do { \ + set_fs(USER_DS); \ + regs->cr_ipsr = ((regs->cr_ipsr | (IA64_PSR_BITS_TO_SET | IA64_PSR_CPL)) \ + & ~(IA64_PSR_BITS_TO_CLEAR | IA64_PSR_RI | IA64_PSR_IS)); \ + regs->cr_iip = new_ip; \ + regs->ar_rsc = 0xf; /* eager mode, privilege level 3 */ \ + regs->ar_rnat = 0; \ + regs->ar_bspstore = current->thread.rbs_bot; \ + regs->ar_fpsr = FPSR_DEFAULT; \ + regs->loadrs = 0; \ + regs->r8 = get_dumpable(current->mm); /* set "don't zap registers" flag */ \ + regs->r12 = new_sp - 16; /* allocate 16 byte scratch area */ \ + if (unlikely(!get_dumpable(current->mm))) { \ + /* \ + * Zap scratch regs to avoid leaking bits between processes with different \ + * uid/privileges. \ + */ \ + regs->ar_pfs = 0; regs->b0 = 0; regs->pr = 0; \ + regs->r1 = 0; regs->r9 = 0; regs->r11 = 0; regs->r13 = 0; regs->r15 = 0; \ + } \ +} while (0) + +/* Forward declarations, a strange C thing... */ +struct mm_struct; +struct task_struct; + +/* + * Free all resources held by a thread. This is called after the + * parent of DEAD_TASK has collected the exit status of the task via + * wait(). + */ +#define release_thread(dead_task) + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +/* + * This is the mechanism for creating a new kernel thread. + * + * NOTE 1: Only a kernel-only process (ie the swapper or direct + * descendants who haven't done an "execve()") should use this: it + * will work within a system call from a "real" process, but the + * process memory space will not be free'd until both the parent and + * the child have exited. + * + * NOTE 2: This MUST NOT be an inlined function. Otherwise, we get + * into trouble in init/main.c when the child thread returns to + * do_basic_setup() and the timing is such that free_initmem() has + * been called already. + */ +extern pid_t kernel_thread (int (*fn)(void *), void *arg, unsigned long flags); + +/* Get wait channel for task P. */ +extern unsigned long get_wchan (struct task_struct *p); + +/* Return instruction pointer of blocked task TSK. */ +#define KSTK_EIP(tsk) \ + ({ \ + struct pt_regs *_regs = task_pt_regs(tsk); \ + _regs->cr_iip + ia64_psr(_regs)->ri; \ + }) + +/* Return stack pointer of blocked task TSK. */ +#define KSTK_ESP(tsk) ((tsk)->thread.ksp) + +extern void ia64_getreg_unknown_kr (void); +extern void ia64_setreg_unknown_kr (void); + +#define ia64_get_kr(regnum) \ +({ \ + unsigned long r = 0; \ + \ + switch (regnum) { \ + case 0: r = ia64_getreg(_IA64_REG_AR_KR0); break; \ + case 1: r = ia64_getreg(_IA64_REG_AR_KR1); break; \ + case 2: r = ia64_getreg(_IA64_REG_AR_KR2); break; \ + case 3: r = ia64_getreg(_IA64_REG_AR_KR3); break; \ + case 4: r = ia64_getreg(_IA64_REG_AR_KR4); break; \ + case 5: r = ia64_getreg(_IA64_REG_AR_KR5); break; \ + case 6: r = ia64_getreg(_IA64_REG_AR_KR6); break; \ + case 7: r = ia64_getreg(_IA64_REG_AR_KR7); break; \ + default: ia64_getreg_unknown_kr(); break; \ + } \ + r; \ +}) + +#define ia64_set_kr(regnum, r) \ +({ \ + switch (regnum) { \ + case 0: ia64_setreg(_IA64_REG_AR_KR0, r); break; \ + case 1: ia64_setreg(_IA64_REG_AR_KR1, r); break; \ + case 2: ia64_setreg(_IA64_REG_AR_KR2, r); break; \ + case 3: ia64_setreg(_IA64_REG_AR_KR3, r); break; \ + case 4: ia64_setreg(_IA64_REG_AR_KR4, r); break; \ + case 5: ia64_setreg(_IA64_REG_AR_KR5, r); break; \ + case 6: ia64_setreg(_IA64_REG_AR_KR6, r); break; \ + case 7: ia64_setreg(_IA64_REG_AR_KR7, r); break; \ + default: ia64_setreg_unknown_kr(); break; \ + } \ +}) + +/* + * The following three macros can't be inline functions because we don't have struct + * task_struct at this point. + */ + +/* + * Return TRUE if task T owns the fph partition of the CPU we're running on. + * Must be called from code that has preemption disabled. + */ +#define ia64_is_local_fpu_owner(t) \ +({ \ + struct task_struct *__ia64_islfo_task = (t); \ + (__ia64_islfo_task->thread.last_fph_cpu == smp_processor_id() \ + && __ia64_islfo_task == (struct task_struct *) ia64_get_kr(IA64_KR_FPU_OWNER)); \ +}) + +/* + * Mark task T as owning the fph partition of the CPU we're running on. + * Must be called from code that has preemption disabled. + */ +#define ia64_set_local_fpu_owner(t) do { \ + struct task_struct *__ia64_slfo_task = (t); \ + __ia64_slfo_task->thread.last_fph_cpu = smp_processor_id(); \ + ia64_set_kr(IA64_KR_FPU_OWNER, (unsigned long) __ia64_slfo_task); \ +} while (0) + +/* Mark the fph partition of task T as being invalid on all CPUs. */ +#define ia64_drop_fpu(t) ((t)->thread.last_fph_cpu = -1) + +extern void __ia64_init_fpu (void); +extern void __ia64_save_fpu (struct ia64_fpreg *fph); +extern void __ia64_load_fpu (struct ia64_fpreg *fph); +extern void ia64_save_debug_regs (unsigned long *save_area); +extern void ia64_load_debug_regs (unsigned long *save_area); + +#ifdef CONFIG_IA32_SUPPORT +extern void ia32_save_state (struct task_struct *task); +extern void ia32_load_state (struct task_struct *task); +#endif + +#define ia64_fph_enable() do { ia64_rsm(IA64_PSR_DFH); ia64_srlz_d(); } while (0) +#define ia64_fph_disable() do { ia64_ssm(IA64_PSR_DFH); ia64_srlz_d(); } while (0) + +/* load fp 0.0 into fph */ +static inline void +ia64_init_fpu (void) { + ia64_fph_enable(); + __ia64_init_fpu(); + ia64_fph_disable(); +} + +/* save f32-f127 at FPH */ +static inline void +ia64_save_fpu (struct ia64_fpreg *fph) { + ia64_fph_enable(); + __ia64_save_fpu(fph); + ia64_fph_disable(); +} + +/* load f32-f127 from FPH */ +static inline void +ia64_load_fpu (struct ia64_fpreg *fph) { + ia64_fph_enable(); + __ia64_load_fpu(fph); + ia64_fph_disable(); +} + +static inline __u64 +ia64_clear_ic (void) +{ + __u64 psr; + psr = ia64_getreg(_IA64_REG_PSR); + ia64_stop(); + ia64_rsm(IA64_PSR_I | IA64_PSR_IC); + ia64_srlz_i(); + return psr; +} + +/* + * Restore the psr. + */ +static inline void +ia64_set_psr (__u64 psr) +{ + ia64_stop(); + ia64_setreg(_IA64_REG_PSR_L, psr); + ia64_srlz_i(); +} + +/* + * Insert a translation into an instruction and/or data translation + * register. + */ +static inline void +ia64_itr (__u64 target_mask, __u64 tr_num, + __u64 vmaddr, __u64 pte, + __u64 log_page_size) +{ + ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2)); + ia64_setreg(_IA64_REG_CR_IFA, vmaddr); + ia64_stop(); + if (target_mask & 0x1) + ia64_itri(tr_num, pte); + if (target_mask & 0x2) + ia64_itrd(tr_num, pte); +} + +/* + * Insert a translation into the instruction and/or data translation + * cache. + */ +static inline void +ia64_itc (__u64 target_mask, __u64 vmaddr, __u64 pte, + __u64 log_page_size) +{ + ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2)); + ia64_setreg(_IA64_REG_CR_IFA, vmaddr); + ia64_stop(); + /* as per EAS2.6, itc must be the last instruction in an instruction group */ + if (target_mask & 0x1) + ia64_itci(pte); + if (target_mask & 0x2) + ia64_itcd(pte); +} + +/* + * Purge a range of addresses from instruction and/or data translation + * register(s). + */ +static inline void +ia64_ptr (__u64 target_mask, __u64 vmaddr, __u64 log_size) +{ + if (target_mask & 0x1) + ia64_ptri(vmaddr, (log_size << 2)); + if (target_mask & 0x2) + ia64_ptrd(vmaddr, (log_size << 2)); +} + +/* Set the interrupt vector address. The address must be suitably aligned (32KB). */ +static inline void +ia64_set_iva (void *ivt_addr) +{ + ia64_setreg(_IA64_REG_CR_IVA, (__u64) ivt_addr); + ia64_srlz_i(); +} + +/* Set the page table address and control bits. */ +static inline void +ia64_set_pta (__u64 pta) +{ + /* Note: srlz.i implies srlz.d */ + ia64_setreg(_IA64_REG_CR_PTA, pta); + ia64_srlz_i(); +} + +static inline void +ia64_eoi (void) +{ + ia64_setreg(_IA64_REG_CR_EOI, 0); + ia64_srlz_d(); +} + +#define cpu_relax() ia64_hint(ia64_hint_pause) + +static inline int +ia64_get_irr(unsigned int vector) +{ + unsigned int reg = vector / 64; + unsigned int bit = vector % 64; + u64 irr; + + switch (reg) { + case 0: irr = ia64_getreg(_IA64_REG_CR_IRR0); break; + case 1: irr = ia64_getreg(_IA64_REG_CR_IRR1); break; + case 2: irr = ia64_getreg(_IA64_REG_CR_IRR2); break; + case 3: irr = ia64_getreg(_IA64_REG_CR_IRR3); break; + } + + return test_bit(bit, &irr); +} + +static inline void +ia64_set_lrr0 (unsigned long val) +{ + ia64_setreg(_IA64_REG_CR_LRR0, val); + ia64_srlz_d(); +} + +static inline void +ia64_set_lrr1 (unsigned long val) +{ + ia64_setreg(_IA64_REG_CR_LRR1, val); + ia64_srlz_d(); +} + + +/* + * Given the address to which a spill occurred, return the unat bit + * number that corresponds to this address. + */ +static inline __u64 +ia64_unat_pos (void *spill_addr) +{ + return ((__u64) spill_addr >> 3) & 0x3f; +} + +/* + * Set the NaT bit of an integer register which was spilled at address + * SPILL_ADDR. UNAT is the mask to be updated. + */ +static inline void +ia64_set_unat (__u64 *unat, void *spill_addr, unsigned long nat) +{ + __u64 bit = ia64_unat_pos(spill_addr); + __u64 mask = 1UL << bit; + + *unat = (*unat & ~mask) | (nat << bit); +} + +/* + * Return saved PC of a blocked thread. + * Note that the only way T can block is through a call to schedule() -> switch_to(). + */ +static inline unsigned long +thread_saved_pc (struct task_struct *t) +{ + struct unw_frame_info info; + unsigned long ip; + + unw_init_from_blocked_task(&info, t); + if (unw_unwind(&info) < 0) + return 0; + unw_get_ip(&info, &ip); + return ip; +} + +/* + * Get the current instruction/program counter value. + */ +#define current_text_addr() \ + ({ void *_pc; _pc = (void *)ia64_getreg(_IA64_REG_IP); _pc; }) + +static inline __u64 +ia64_get_ivr (void) +{ + __u64 r; + ia64_srlz_d(); + r = ia64_getreg(_IA64_REG_CR_IVR); + ia64_srlz_d(); + return r; +} + +static inline void +ia64_set_dbr (__u64 regnum, __u64 value) +{ + __ia64_set_dbr(regnum, value); +#ifdef CONFIG_ITANIUM + ia64_srlz_d(); +#endif +} + +static inline __u64 +ia64_get_dbr (__u64 regnum) +{ + __u64 retval; + + retval = __ia64_get_dbr(regnum); +#ifdef CONFIG_ITANIUM + ia64_srlz_d(); +#endif + return retval; +} + +static inline __u64 +ia64_rotr (__u64 w, __u64 n) +{ + return (w >> n) | (w << (64 - n)); +} + +#define ia64_rotl(w,n) ia64_rotr((w), (64) - (n)) + +/* + * Take a mapped kernel address and return the equivalent address + * in the region 7 identity mapped virtual area. + */ +static inline void * +ia64_imva (void *addr) +{ + void *result; + result = (void *) ia64_tpa(addr); + return __va(result); +} + +#define ARCH_HAS_PREFETCH +#define ARCH_HAS_PREFETCHW +#define ARCH_HAS_SPINLOCK_PREFETCH +#define PREFETCH_STRIDE L1_CACHE_BYTES + +static inline void +prefetch (const void *x) +{ + ia64_lfetch(ia64_lfhint_none, x); +} + +static inline void +prefetchw (const void *x) +{ + ia64_lfetch_excl(ia64_lfhint_none, x); +} + +#define spin_lock_prefetch(x) prefetchw(x) + +extern unsigned long boot_option_idle_override; +extern unsigned long idle_halt; +extern unsigned long idle_nomwait; + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_IA64_PROCESSOR_H */ diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h new file mode 100644 index 000000000000..15f8dcfe6eee --- /dev/null +++ b/arch/ia64/include/asm/ptrace.h @@ -0,0 +1,364 @@ +#ifndef _ASM_IA64_PTRACE_H +#define _ASM_IA64_PTRACE_H + +/* + * Copyright (C) 1998-2004 Hewlett-Packard Co + * David Mosberger-Tang + * Stephane Eranian + * Copyright (C) 2003 Intel Co + * Suresh Siddha + * Fenghua Yu + * Arun Sharma + * + * 12/07/98 S. Eranian added pt_regs & switch_stack + * 12/21/98 D. Mosberger updated to match latest code + * 6/17/99 D. Mosberger added second unat member to "struct switch_stack" + * + */ +/* + * When a user process is blocked, its state looks as follows: + * + * +----------------------+ ------- IA64_STK_OFFSET + * | | ^ + * | struct pt_regs | | + * | | | + * +----------------------+ | + * | | | + * | memory stack | | + * | (growing downwards) | | + * //.....................// | + * | + * //.....................// | + * | | | + * +----------------------+ | + * | struct switch_stack | | + * | | | + * +----------------------+ | + * | | | + * //.....................// | + * | + * //.....................// | + * | | | + * | register stack | | + * | (growing upwards) | | + * | | | + * +----------------------+ | --- IA64_RBS_OFFSET + * | struct thread_info | | ^ + * +----------------------+ | | + * | | | | + * | struct task_struct | | | + * current -> | | | | + * +----------------------+ ------- + * + * Note that ar.ec is not saved explicitly in pt_reg or switch_stack. + * This is because ar.ec is saved as part of ar.pfs. + */ + + +#include + +#ifdef __KERNEL__ +#ifndef ASM_OFFSETS_C +#include +#endif + +/* + * Base-2 logarithm of number of pages to allocate per task structure + * (including register backing store and memory stack): + */ +#if defined(CONFIG_IA64_PAGE_SIZE_4KB) +# define KERNEL_STACK_SIZE_ORDER 3 +#elif defined(CONFIG_IA64_PAGE_SIZE_8KB) +# define KERNEL_STACK_SIZE_ORDER 2 +#elif defined(CONFIG_IA64_PAGE_SIZE_16KB) +# define KERNEL_STACK_SIZE_ORDER 1 +#else +# define KERNEL_STACK_SIZE_ORDER 0 +#endif + +#define IA64_RBS_OFFSET ((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 31) & ~31) +#define IA64_STK_OFFSET ((1 << KERNEL_STACK_SIZE_ORDER)*PAGE_SIZE) + +#define KERNEL_STACK_SIZE IA64_STK_OFFSET + +#endif /* __KERNEL__ */ + +#ifndef __ASSEMBLY__ + +/* + * This struct defines the way the registers are saved on system + * calls. + * + * We don't save all floating point register because the kernel + * is compiled to use only a very small subset, so the other are + * untouched. + * + * THIS STRUCTURE MUST BE A MULTIPLE 16-BYTE IN SIZE + * (because the memory stack pointer MUST ALWAYS be aligned this way) + * + */ +struct pt_regs { + /* The following registers are saved by SAVE_MIN: */ + unsigned long b6; /* scratch */ + unsigned long b7; /* scratch */ + + unsigned long ar_csd; /* used by cmp8xchg16 (scratch) */ + unsigned long ar_ssd; /* reserved for future use (scratch) */ + + unsigned long r8; /* scratch (return value register 0) */ + unsigned long r9; /* scratch (return value register 1) */ + unsigned long r10; /* scratch (return value register 2) */ + unsigned long r11; /* scratch (return value register 3) */ + + unsigned long cr_ipsr; /* interrupted task's psr */ + unsigned long cr_iip; /* interrupted task's instruction pointer */ + /* + * interrupted task's function state; if bit 63 is cleared, it + * contains syscall's ar.pfs.pfm: + */ + unsigned long cr_ifs; + + unsigned long ar_unat; /* interrupted task's NaT register (preserved) */ + unsigned long ar_pfs; /* prev function state */ + unsigned long ar_rsc; /* RSE configuration */ + /* The following two are valid only if cr_ipsr.cpl > 0 || ti->flags & _TIF_MCA_INIT */ + unsigned long ar_rnat; /* RSE NaT */ + unsigned long ar_bspstore; /* RSE bspstore */ + + unsigned long pr; /* 64 predicate registers (1 bit each) */ + unsigned long b0; /* return pointer (bp) */ + unsigned long loadrs; /* size of dirty partition << 16 */ + + unsigned long r1; /* the gp pointer */ + unsigned long r12; /* interrupted task's memory stack pointer */ + unsigned long r13; /* thread pointer */ + + unsigned long ar_fpsr; /* floating point status (preserved) */ + unsigned long r15; /* scratch */ + + /* The remaining registers are NOT saved for system calls. */ + + unsigned long r14; /* scratch */ + unsigned long r2; /* scratch */ + unsigned long r3; /* scratch */ + + /* The following registers are saved by SAVE_REST: */ + unsigned long r16; /* scratch */ + unsigned long r17; /* scratch */ + unsigned long r18; /* scratch */ + unsigned long r19; /* scratch */ + unsigned long r20; /* scratch */ + unsigned long r21; /* scratch */ + unsigned long r22; /* scratch */ + unsigned long r23; /* scratch */ + unsigned long r24; /* scratch */ + unsigned long r25; /* scratch */ + unsigned long r26; /* scratch */ + unsigned long r27; /* scratch */ + unsigned long r28; /* scratch */ + unsigned long r29; /* scratch */ + unsigned long r30; /* scratch */ + unsigned long r31; /* scratch */ + + unsigned long ar_ccv; /* compare/exchange value (scratch) */ + + /* + * Floating point registers that the kernel considers scratch: + */ + struct ia64_fpreg f6; /* scratch */ + struct ia64_fpreg f7; /* scratch */ + struct ia64_fpreg f8; /* scratch */ + struct ia64_fpreg f9; /* scratch */ + struct ia64_fpreg f10; /* scratch */ + struct ia64_fpreg f11; /* scratch */ +}; + +/* + * This structure contains the addition registers that need to + * preserved across a context switch. This generally consists of + * "preserved" registers. + */ +struct switch_stack { + unsigned long caller_unat; /* user NaT collection register (preserved) */ + unsigned long ar_fpsr; /* floating-point status register */ + + struct ia64_fpreg f2; /* preserved */ + struct ia64_fpreg f3; /* preserved */ + struct ia64_fpreg f4; /* preserved */ + struct ia64_fpreg f5; /* preserved */ + + struct ia64_fpreg f12; /* scratch, but untouched by kernel */ + struct ia64_fpreg f13; /* scratch, but untouched by kernel */ + struct ia64_fpreg f14; /* scratch, but untouched by kernel */ + struct ia64_fpreg f15; /* scratch, but untouched by kernel */ + struct ia64_fpreg f16; /* preserved */ + struct ia64_fpreg f17; /* preserved */ + struct ia64_fpreg f18; /* preserved */ + struct ia64_fpreg f19; /* preserved */ + struct ia64_fpreg f20; /* preserved */ + struct ia64_fpreg f21; /* preserved */ + struct ia64_fpreg f22; /* preserved */ + struct ia64_fpreg f23; /* preserved */ + struct ia64_fpreg f24; /* preserved */ + struct ia64_fpreg f25; /* preserved */ + struct ia64_fpreg f26; /* preserved */ + struct ia64_fpreg f27; /* preserved */ + struct ia64_fpreg f28; /* preserved */ + struct ia64_fpreg f29; /* preserved */ + struct ia64_fpreg f30; /* preserved */ + struct ia64_fpreg f31; /* preserved */ + + unsigned long r4; /* preserved */ + unsigned long r5; /* preserved */ + unsigned long r6; /* preserved */ + unsigned long r7; /* preserved */ + + unsigned long b0; /* so we can force a direct return in copy_thread */ + unsigned long b1; + unsigned long b2; + unsigned long b3; + unsigned long b4; + unsigned long b5; + + unsigned long ar_pfs; /* previous function state */ + unsigned long ar_lc; /* loop counter (preserved) */ + unsigned long ar_unat; /* NaT bits for r4-r7 */ + unsigned long ar_rnat; /* RSE NaT collection register */ + unsigned long ar_bspstore; /* RSE dirty base (preserved) */ + unsigned long pr; /* 64 predicate registers (1 bit each) */ +}; + +#ifdef __KERNEL__ + +#include +#include + +/* + * We use the ia64_psr(regs)->ri to determine which of the three + * instructions in bundle (16 bytes) took the sample. Generate + * the canonical representation by adding to instruction pointer. + */ +# define instruction_pointer(regs) ((regs)->cr_iip + ia64_psr(regs)->ri) + +#define regs_return_value(regs) ((regs)->r8) + +/* Conserve space in histogram by encoding slot bits in address + * bits 2 and 3 rather than bits 0 and 1. + */ +#define profile_pc(regs) \ +({ \ + unsigned long __ip = instruction_pointer(regs); \ + (__ip & ~3UL) + ((__ip & 3UL) << 2); \ +}) + + /* given a pointer to a task_struct, return the user's pt_regs */ +# define task_pt_regs(t) (((struct pt_regs *) ((char *) (t) + IA64_STK_OFFSET)) - 1) +# define ia64_psr(regs) ((struct ia64_psr *) &(regs)->cr_ipsr) +# define user_mode(regs) (((struct ia64_psr *) &(regs)->cr_ipsr)->cpl != 0) +# define user_stack(task,regs) ((long) regs - (long) task == IA64_STK_OFFSET - sizeof(*regs)) +# define fsys_mode(task,regs) \ + ({ \ + struct task_struct *_task = (task); \ + struct pt_regs *_regs = (regs); \ + !user_mode(_regs) && user_stack(_task, _regs); \ + }) + + /* + * System call handlers that, upon successful completion, need to return a negative value + * should call force_successful_syscall_return() right before returning. On architectures + * where the syscall convention provides for a separate error flag (e.g., alpha, ia64, + * ppc{,64}, sparc{,64}, possibly others), this macro can be used to ensure that the error + * flag will not get set. On architectures which do not support a separate error flag, + * the macro is a no-op and the spurious error condition needs to be filtered out by some + * other means (e.g., in user-level, by passing an extra argument to the syscall handler, + * or something along those lines). + * + * On ia64, we can clear the user's pt_regs->r8 to force a successful syscall. + */ +# define force_successful_syscall_return() (task_pt_regs(current)->r8 = 0) + + struct task_struct; /* forward decl */ + struct unw_frame_info; /* forward decl */ + + extern void show_regs (struct pt_regs *); + extern void ia64_do_show_stack (struct unw_frame_info *, void *); + extern unsigned long ia64_get_user_rbs_end (struct task_struct *, struct pt_regs *, + unsigned long *); + extern long ia64_peek (struct task_struct *, struct switch_stack *, unsigned long, + unsigned long, long *); + extern long ia64_poke (struct task_struct *, struct switch_stack *, unsigned long, + unsigned long, long); + extern void ia64_flush_fph (struct task_struct *); + extern void ia64_sync_fph (struct task_struct *); + extern void ia64_sync_krbs(void); + extern long ia64_sync_user_rbs (struct task_struct *, struct switch_stack *, + unsigned long, unsigned long); + + /* get nat bits for scratch registers such that bit N==1 iff scratch register rN is a NaT */ + extern unsigned long ia64_get_scratch_nat_bits (struct pt_regs *pt, unsigned long scratch_unat); + /* put nat bits for scratch registers such that scratch register rN is a NaT iff bit N==1 */ + extern unsigned long ia64_put_scratch_nat_bits (struct pt_regs *pt, unsigned long nat); + + extern void ia64_increment_ip (struct pt_regs *pt); + extern void ia64_decrement_ip (struct pt_regs *pt); + + extern void ia64_ptrace_stop(void); + #define arch_ptrace_stop(code, info) \ + ia64_ptrace_stop() + #define arch_ptrace_stop_needed(code, info) \ + (!test_thread_flag(TIF_RESTORE_RSE)) + + extern void ptrace_attach_sync_user_rbs (struct task_struct *); + #define arch_ptrace_attach(child) \ + ptrace_attach_sync_user_rbs(child) + + #define arch_has_single_step() (1) + extern void user_enable_single_step(struct task_struct *); + extern void user_disable_single_step(struct task_struct *); + + #define arch_has_block_step() (1) + extern void user_enable_block_step(struct task_struct *); + +#endif /* !__KERNEL__ */ + +/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */ +struct pt_all_user_regs { + unsigned long nat; + unsigned long cr_iip; + unsigned long cfm; + unsigned long cr_ipsr; + unsigned long pr; + + unsigned long gr[32]; + unsigned long br[8]; + unsigned long ar[128]; + struct ia64_fpreg fr[128]; +}; + +#endif /* !__ASSEMBLY__ */ + +/* indices to application-registers array in pt_all_user_regs */ +#define PT_AUR_RSC 16 +#define PT_AUR_BSP 17 +#define PT_AUR_BSPSTORE 18 +#define PT_AUR_RNAT 19 +#define PT_AUR_CCV 32 +#define PT_AUR_UNAT 36 +#define PT_AUR_FPSR 40 +#define PT_AUR_PFS 64 +#define PT_AUR_LC 65 +#define PT_AUR_EC 66 + +/* + * The numbers chosen here are somewhat arbitrary but absolutely MUST + * not overlap with any of the number assigned in . + */ +#define PTRACE_SINGLEBLOCK 12 /* resume execution until next branch */ +#define PTRACE_OLD_GETSIGINFO 13 /* (replaced by PTRACE_GETSIGINFO in ) */ +#define PTRACE_OLD_SETSIGINFO 14 /* (replaced by PTRACE_SETSIGINFO in ) */ +#define PTRACE_GETREGS 18 /* get all registers (pt_all_user_regs) in one shot */ +#define PTRACE_SETREGS 19 /* set all registers (pt_all_user_regs) in one shot */ + +#define PTRACE_OLDSETOPTIONS 21 + +#endif /* _ASM_IA64_PTRACE_H */ diff --git a/arch/ia64/include/asm/ptrace_offsets.h b/arch/ia64/include/asm/ptrace_offsets.h new file mode 100644 index 000000000000..b712773c759e --- /dev/null +++ b/arch/ia64/include/asm/ptrace_offsets.h @@ -0,0 +1,268 @@ +#ifndef _ASM_IA64_PTRACE_OFFSETS_H +#define _ASM_IA64_PTRACE_OFFSETS_H + +/* + * Copyright (C) 1999, 2003 Hewlett-Packard Co + * David Mosberger-Tang + */ +/* + * The "uarea" that can be accessed via PEEKUSER and POKEUSER is a + * virtual structure that would have the following definition: + * + * struct uarea { + * struct ia64_fpreg fph[96]; // f32-f127 + * unsigned long nat_bits; + * unsigned long empty1; + * struct ia64_fpreg f2; // f2-f5 + * : + * struct ia64_fpreg f5; + * struct ia64_fpreg f10; // f10-f31 + * : + * struct ia64_fpreg f31; + * unsigned long r4; // r4-r7 + * : + * unsigned long r7; + * unsigned long b1; // b1-b5 + * : + * unsigned long b5; + * unsigned long ar_ec; + * unsigned long ar_lc; + * unsigned long empty2[5]; + * unsigned long cr_ipsr; + * unsigned long cr_iip; + * unsigned long cfm; + * unsigned long ar_unat; + * unsigned long ar_pfs; + * unsigned long ar_rsc; + * unsigned long ar_rnat; + * unsigned long ar_bspstore; + * unsigned long pr; + * unsigned long b6; + * unsigned long ar_bsp; + * unsigned long r1; + * unsigned long r2; + * unsigned long r3; + * unsigned long r12; + * unsigned long r13; + * unsigned long r14; + * unsigned long r15; + * unsigned long r8; + * unsigned long r9; + * unsigned long r10; + * unsigned long r11; + * unsigned long r16; + * : + * unsigned long r31; + * unsigned long ar_ccv; + * unsigned long ar_fpsr; + * unsigned long b0; + * unsigned long b7; + * unsigned long f6; + * unsigned long f7; + * unsigned long f8; + * unsigned long f9; + * unsigned long ar_csd; + * unsigned long ar_ssd; + * unsigned long rsvd1[710]; + * unsigned long dbr[8]; + * unsigned long rsvd2[504]; + * unsigned long ibr[8]; + * unsigned long rsvd3[504]; + * unsigned long pmd[4]; + * } + */ + +/* fph: */ +#define PT_F32 0x0000 +#define PT_F33 0x0010 +#define PT_F34 0x0020 +#define PT_F35 0x0030 +#define PT_F36 0x0040 +#define PT_F37 0x0050 +#define PT_F38 0x0060 +#define PT_F39 0x0070 +#define PT_F40 0x0080 +#define PT_F41 0x0090 +#define PT_F42 0x00a0 +#define PT_F43 0x00b0 +#define PT_F44 0x00c0 +#define PT_F45 0x00d0 +#define PT_F46 0x00e0 +#define PT_F47 0x00f0 +#define PT_F48 0x0100 +#define PT_F49 0x0110 +#define PT_F50 0x0120 +#define PT_F51 0x0130 +#define PT_F52 0x0140 +#define PT_F53 0x0150 +#define PT_F54 0x0160 +#define PT_F55 0x0170 +#define PT_F56 0x0180 +#define PT_F57 0x0190 +#define PT_F58 0x01a0 +#define PT_F59 0x01b0 +#define PT_F60 0x01c0 +#define PT_F61 0x01d0 +#define PT_F62 0x01e0 +#define PT_F63 0x01f0 +#define PT_F64 0x0200 +#define PT_F65 0x0210 +#define PT_F66 0x0220 +#define PT_F67 0x0230 +#define PT_F68 0x0240 +#define PT_F69 0x0250 +#define PT_F70 0x0260 +#define PT_F71 0x0270 +#define PT_F72 0x0280 +#define PT_F73 0x0290 +#define PT_F74 0x02a0 +#define PT_F75 0x02b0 +#define PT_F76 0x02c0 +#define PT_F77 0x02d0 +#define PT_F78 0x02e0 +#define PT_F79 0x02f0 +#define PT_F80 0x0300 +#define PT_F81 0x0310 +#define PT_F82 0x0320 +#define PT_F83 0x0330 +#define PT_F84 0x0340 +#define PT_F85 0x0350 +#define PT_F86 0x0360 +#define PT_F87 0x0370 +#define PT_F88 0x0380 +#define PT_F89 0x0390 +#define PT_F90 0x03a0 +#define PT_F91 0x03b0 +#define PT_F92 0x03c0 +#define PT_F93 0x03d0 +#define PT_F94 0x03e0 +#define PT_F95 0x03f0 +#define PT_F96 0x0400 +#define PT_F97 0x0410 +#define PT_F98 0x0420 +#define PT_F99 0x0430 +#define PT_F100 0x0440 +#define PT_F101 0x0450 +#define PT_F102 0x0460 +#define PT_F103 0x0470 +#define PT_F104 0x0480 +#define PT_F105 0x0490 +#define PT_F106 0x04a0 +#define PT_F107 0x04b0 +#define PT_F108 0x04c0 +#define PT_F109 0x04d0 +#define PT_F110 0x04e0 +#define PT_F111 0x04f0 +#define PT_F112 0x0500 +#define PT_F113 0x0510 +#define PT_F114 0x0520 +#define PT_F115 0x0530 +#define PT_F116 0x0540 +#define PT_F117 0x0550 +#define PT_F118 0x0560 +#define PT_F119 0x0570 +#define PT_F120 0x0580 +#define PT_F121 0x0590 +#define PT_F122 0x05a0 +#define PT_F123 0x05b0 +#define PT_F124 0x05c0 +#define PT_F125 0x05d0 +#define PT_F126 0x05e0 +#define PT_F127 0x05f0 + +#define PT_NAT_BITS 0x0600 + +#define PT_F2 0x0610 +#define PT_F3 0x0620 +#define PT_F4 0x0630 +#define PT_F5 0x0640 +#define PT_F10 0x0650 +#define PT_F11 0x0660 +#define PT_F12 0x0670 +#define PT_F13 0x0680 +#define PT_F14 0x0690 +#define PT_F15 0x06a0 +#define PT_F16 0x06b0 +#define PT_F17 0x06c0 +#define PT_F18 0x06d0 +#define PT_F19 0x06e0 +#define PT_F20 0x06f0 +#define PT_F21 0x0700 +#define PT_F22 0x0710 +#define PT_F23 0x0720 +#define PT_F24 0x0730 +#define PT_F25 0x0740 +#define PT_F26 0x0750 +#define PT_F27 0x0760 +#define PT_F28 0x0770 +#define PT_F29 0x0780 +#define PT_F30 0x0790 +#define PT_F31 0x07a0 +#define PT_R4 0x07b0 +#define PT_R5 0x07b8 +#define PT_R6 0x07c0 +#define PT_R7 0x07c8 + +#define PT_B1 0x07d8 +#define PT_B2 0x07e0 +#define PT_B3 0x07e8 +#define PT_B4 0x07f0 +#define PT_B5 0x07f8 + +#define PT_AR_EC 0x0800 +#define PT_AR_LC 0x0808 + +#define PT_CR_IPSR 0x0830 +#define PT_CR_IIP 0x0838 +#define PT_CFM 0x0840 +#define PT_AR_UNAT 0x0848 +#define PT_AR_PFS 0x0850 +#define PT_AR_RSC 0x0858 +#define PT_AR_RNAT 0x0860 +#define PT_AR_BSPSTORE 0x0868 +#define PT_PR 0x0870 +#define PT_B6 0x0878 +#define PT_AR_BSP 0x0880 /* note: this points to the *end* of the backing store! */ +#define PT_R1 0x0888 +#define PT_R2 0x0890 +#define PT_R3 0x0898 +#define PT_R12 0x08a0 +#define PT_R13 0x08a8 +#define PT_R14 0x08b0 +#define PT_R15 0x08b8 +#define PT_R8 0x08c0 +#define PT_R9 0x08c8 +#define PT_R10 0x08d0 +#define PT_R11 0x08d8 +#define PT_R16 0x08e0 +#define PT_R17 0x08e8 +#define PT_R18 0x08f0 +#define PT_R19 0x08f8 +#define PT_R20 0x0900 +#define PT_R21 0x0908 +#define PT_R22 0x0910 +#define PT_R23 0x0918 +#define PT_R24 0x0920 +#define PT_R25 0x0928 +#define PT_R26 0x0930 +#define PT_R27 0x0938 +#define PT_R28 0x0940 +#define PT_R29 0x0948 +#define PT_R30 0x0950 +#define PT_R31 0x0958 +#define PT_AR_CCV 0x0960 +#define PT_AR_FPSR 0x0968 +#define PT_B0 0x0970 +#define PT_B7 0x0978 +#define PT_F6 0x0980 +#define PT_F7 0x0990 +#define PT_F8 0x09a0 +#define PT_F9 0x09b0 +#define PT_AR_CSD 0x09c0 +#define PT_AR_SSD 0x09c8 + +#define PT_DBR 0x2000 /* data breakpoint registers */ +#define PT_IBR 0x3000 /* instruction breakpoint registers */ +#define PT_PMD 0x4000 /* performance monitoring counters */ + +#endif /* _ASM_IA64_PTRACE_OFFSETS_H */ diff --git a/arch/ia64/include/asm/resource.h b/arch/ia64/include/asm/resource.h new file mode 100644 index 000000000000..ba2272a87fc7 --- /dev/null +++ b/arch/ia64/include/asm/resource.h @@ -0,0 +1,7 @@ +#ifndef _ASM_IA64_RESOURCE_H +#define _ASM_IA64_RESOURCE_H + +#include +#include + +#endif /* _ASM_IA64_RESOURCE_H */ diff --git a/arch/ia64/include/asm/rse.h b/arch/ia64/include/asm/rse.h new file mode 100644 index 000000000000..02830a3b0196 --- /dev/null +++ b/arch/ia64/include/asm/rse.h @@ -0,0 +1,66 @@ +#ifndef _ASM_IA64_RSE_H +#define _ASM_IA64_RSE_H + +/* + * Copyright (C) 1998, 1999 Hewlett-Packard Co + * Copyright (C) 1998, 1999 David Mosberger-Tang + * + * Register stack engine related helper functions. This file may be + * used in applications, so be careful about the name-space and give + * some consideration to non-GNU C compilers (though __inline__ is + * fine). + */ + +static __inline__ unsigned long +ia64_rse_slot_num (unsigned long *addr) +{ + return (((unsigned long) addr) >> 3) & 0x3f; +} + +/* + * Return TRUE if ADDR is the address of an RNAT slot. + */ +static __inline__ unsigned long +ia64_rse_is_rnat_slot (unsigned long *addr) +{ + return ia64_rse_slot_num(addr) == 0x3f; +} + +/* + * Returns the address of the RNAT slot that covers the slot at + * address SLOT_ADDR. + */ +static __inline__ unsigned long * +ia64_rse_rnat_addr (unsigned long *slot_addr) +{ + return (unsigned long *) ((unsigned long) slot_addr | (0x3f << 3)); +} + +/* + * Calculate the number of registers in the dirty partition starting at BSPSTORE and + * ending at BSP. This isn't simply (BSP-BSPSTORE)/8 because every 64th slot stores + * ar.rnat. + */ +static __inline__ unsigned long +ia64_rse_num_regs (unsigned long *bspstore, unsigned long *bsp) +{ + unsigned long slots = (bsp - bspstore); + + return slots - (ia64_rse_slot_num(bspstore) + slots)/0x40; +} + +/* + * The inverse of the above: given bspstore and the number of + * registers, calculate ar.bsp. + */ +static __inline__ unsigned long * +ia64_rse_skip_regs (unsigned long *addr, long num_regs) +{ + long delta = ia64_rse_slot_num(addr) + num_regs; + + if (num_regs < 0) + delta -= 0x3e; + return addr + num_regs + delta/0x3f; +} + +#endif /* _ASM_IA64_RSE_H */ diff --git a/arch/ia64/include/asm/rwsem.h b/arch/ia64/include/asm/rwsem.h new file mode 100644 index 000000000000..fbee74b15782 --- /dev/null +++ b/arch/ia64/include/asm/rwsem.h @@ -0,0 +1,182 @@ +/* + * R/W semaphores for ia64 + * + * Copyright (C) 2003 Ken Chen + * Copyright (C) 2003 Asit Mallick + * Copyright (C) 2005 Christoph Lameter + * + * Based on asm-i386/rwsem.h and other architecture implementation. + * + * The MSW of the count is the negated number of active writers and + * waiting lockers, and the LSW is the total number of active locks. + * + * The lock count is initialized to 0 (no active and no waiting lockers). + * + * When a writer subtracts WRITE_BIAS, it'll get 0xffffffff00000001 for + * the case of an uncontended lock. Readers increment by 1 and see a positive + * value when uncontended, negative if there are writers (and maybe) readers + * waiting (in which case it goes to sleep). + */ + +#ifndef _ASM_IA64_RWSEM_H +#define _ASM_IA64_RWSEM_H + +#ifndef _LINUX_RWSEM_H +#error "Please don't include directly, use instead." +#endif + +#include +#include + +#include + +/* + * the semaphore definition + */ +struct rw_semaphore { + signed long count; + spinlock_t wait_lock; + struct list_head wait_list; +}; + +#define RWSEM_UNLOCKED_VALUE __IA64_UL_CONST(0x0000000000000000) +#define RWSEM_ACTIVE_BIAS __IA64_UL_CONST(0x0000000000000001) +#define RWSEM_ACTIVE_MASK __IA64_UL_CONST(0x00000000ffffffff) +#define RWSEM_WAITING_BIAS -__IA64_UL_CONST(0x0000000100000000) +#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS +#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) + +#define __RWSEM_INITIALIZER(name) \ + { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ + LIST_HEAD_INIT((name).wait_list) } + +#define DECLARE_RWSEM(name) \ + struct rw_semaphore name = __RWSEM_INITIALIZER(name) + +extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); + +static inline void +init_rwsem (struct rw_semaphore *sem) +{ + sem->count = RWSEM_UNLOCKED_VALUE; + spin_lock_init(&sem->wait_lock); + INIT_LIST_HEAD(&sem->wait_list); +} + +/* + * lock for reading + */ +static inline void +__down_read (struct rw_semaphore *sem) +{ + long result = ia64_fetchadd8_acq((unsigned long *)&sem->count, 1); + + if (result < 0) + rwsem_down_read_failed(sem); +} + +/* + * lock for writing + */ +static inline void +__down_write (struct rw_semaphore *sem) +{ + long old, new; + + do { + old = sem->count; + new = old + RWSEM_ACTIVE_WRITE_BIAS; + } while (cmpxchg_acq(&sem->count, old, new) != old); + + if (old != 0) + rwsem_down_write_failed(sem); +} + +/* + * unlock after reading + */ +static inline void +__up_read (struct rw_semaphore *sem) +{ + long result = ia64_fetchadd8_rel((unsigned long *)&sem->count, -1); + + if (result < 0 && (--result & RWSEM_ACTIVE_MASK) == 0) + rwsem_wake(sem); +} + +/* + * unlock after writing + */ +static inline void +__up_write (struct rw_semaphore *sem) +{ + long old, new; + + do { + old = sem->count; + new = old - RWSEM_ACTIVE_WRITE_BIAS; + } while (cmpxchg_rel(&sem->count, old, new) != old); + + if (new < 0 && (new & RWSEM_ACTIVE_MASK) == 0) + rwsem_wake(sem); +} + +/* + * trylock for reading -- returns 1 if successful, 0 if contention + */ +static inline int +__down_read_trylock (struct rw_semaphore *sem) +{ + long tmp; + while ((tmp = sem->count) >= 0) { + if (tmp == cmpxchg_acq(&sem->count, tmp, tmp+1)) { + return 1; + } + } + return 0; +} + +/* + * trylock for writing -- returns 1 if successful, 0 if contention + */ +static inline int +__down_write_trylock (struct rw_semaphore *sem) +{ + long tmp = cmpxchg_acq(&sem->count, RWSEM_UNLOCKED_VALUE, + RWSEM_ACTIVE_WRITE_BIAS); + return tmp == RWSEM_UNLOCKED_VALUE; +} + +/* + * downgrade write lock to read lock + */ +static inline void +__downgrade_write (struct rw_semaphore *sem) +{ + long old, new; + + do { + old = sem->count; + new = old - RWSEM_WAITING_BIAS; + } while (cmpxchg_rel(&sem->count, old, new) != old); + + if (old < 0) + rwsem_downgrade_wake(sem); +} + +/* + * Implement atomic add functionality. These used to be "inline" functions, but GCC v3.1 + * doesn't quite optimize this stuff right and ends up with bad calls to fetchandadd. + */ +#define rwsem_atomic_add(delta, sem) atomic64_add(delta, (atomic64_t *)(&(sem)->count)) +#define rwsem_atomic_update(delta, sem) atomic64_add_return(delta, (atomic64_t *)(&(sem)->count)) + +static inline int rwsem_is_locked(struct rw_semaphore *sem) +{ + return (sem->count != 0); +} + +#endif /* _ASM_IA64_RWSEM_H */ diff --git a/arch/ia64/include/asm/sal.h b/arch/ia64/include/asm/sal.h new file mode 100644 index 000000000000..89594b442f83 --- /dev/null +++ b/arch/ia64/include/asm/sal.h @@ -0,0 +1,905 @@ +#ifndef _ASM_IA64_SAL_H +#define _ASM_IA64_SAL_H + +/* + * System Abstraction Layer definitions. + * + * This is based on version 2.5 of the manual "IA-64 System + * Abstraction Layer". + * + * Copyright (C) 2001 Intel + * Copyright (C) 2002 Jenna Hall + * Copyright (C) 2001 Fred Lewis + * Copyright (C) 1998, 1999, 2001, 2003 Hewlett-Packard Co + * David Mosberger-Tang + * Copyright (C) 1999 Srinivasa Prasad Thirumalachar + * + * 02/01/04 J. Hall Updated Error Record Structures to conform to July 2001 + * revision of the SAL spec. + * 01/01/03 fvlewis Updated Error Record Structures to conform with Nov. 2000 + * revision of the SAL spec. + * 99/09/29 davidm Updated for SAL 2.6. + * 00/03/29 cfleck Updated SAL Error Logging info for processor (SAL 2.6) + * (plus examples of platform error info structures from smariset @ Intel) + */ + +#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK_BIT 0 +#define IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT_BIT 1 +#define IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT_BIT 2 +#define IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT 3 + +#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK (1< +#include +#include + +#include +#include +#include + +extern spinlock_t sal_lock; + +/* SAL spec _requires_ eight args for each call. */ +#define __IA64_FW_CALL(entry,result,a0,a1,a2,a3,a4,a5,a6,a7) \ + result = (*entry)(a0,a1,a2,a3,a4,a5,a6,a7) + +# define IA64_FW_CALL(entry,result,args...) do { \ + unsigned long __ia64_sc_flags; \ + struct ia64_fpreg __ia64_sc_fr[6]; \ + ia64_save_scratch_fpregs(__ia64_sc_fr); \ + spin_lock_irqsave(&sal_lock, __ia64_sc_flags); \ + __IA64_FW_CALL(entry, result, args); \ + spin_unlock_irqrestore(&sal_lock, __ia64_sc_flags); \ + ia64_load_scratch_fpregs(__ia64_sc_fr); \ +} while (0) + +# define SAL_CALL(result,args...) \ + IA64_FW_CALL(ia64_sal, result, args); + +# define SAL_CALL_NOLOCK(result,args...) do { \ + unsigned long __ia64_scn_flags; \ + struct ia64_fpreg __ia64_scn_fr[6]; \ + ia64_save_scratch_fpregs(__ia64_scn_fr); \ + local_irq_save(__ia64_scn_flags); \ + __IA64_FW_CALL(ia64_sal, result, args); \ + local_irq_restore(__ia64_scn_flags); \ + ia64_load_scratch_fpregs(__ia64_scn_fr); \ +} while (0) + +# define SAL_CALL_REENTRANT(result,args...) do { \ + struct ia64_fpreg __ia64_scs_fr[6]; \ + ia64_save_scratch_fpregs(__ia64_scs_fr); \ + preempt_disable(); \ + __IA64_FW_CALL(ia64_sal, result, args); \ + preempt_enable(); \ + ia64_load_scratch_fpregs(__ia64_scs_fr); \ +} while (0) + +#define SAL_SET_VECTORS 0x01000000 +#define SAL_GET_STATE_INFO 0x01000001 +#define SAL_GET_STATE_INFO_SIZE 0x01000002 +#define SAL_CLEAR_STATE_INFO 0x01000003 +#define SAL_MC_RENDEZ 0x01000004 +#define SAL_MC_SET_PARAMS 0x01000005 +#define SAL_REGISTER_PHYSICAL_ADDR 0x01000006 + +#define SAL_CACHE_FLUSH 0x01000008 +#define SAL_CACHE_INIT 0x01000009 +#define SAL_PCI_CONFIG_READ 0x01000010 +#define SAL_PCI_CONFIG_WRITE 0x01000011 +#define SAL_FREQ_BASE 0x01000012 +#define SAL_PHYSICAL_ID_INFO 0x01000013 + +#define SAL_UPDATE_PAL 0x01000020 + +struct ia64_sal_retval { + /* + * A zero status value indicates call completed without error. + * A negative status value indicates reason of call failure. + * A positive status value indicates success but an + * informational value should be printed (e.g., "reboot for + * change to take effect"). + */ + s64 status; + u64 v0; + u64 v1; + u64 v2; +}; + +typedef struct ia64_sal_retval (*ia64_sal_handler) (u64, ...); + +enum { + SAL_FREQ_BASE_PLATFORM = 0, + SAL_FREQ_BASE_INTERVAL_TIMER = 1, + SAL_FREQ_BASE_REALTIME_CLOCK = 2 +}; + +/* + * The SAL system table is followed by a variable number of variable + * length descriptors. The structure of these descriptors follows + * below. + * The defininition follows SAL specs from July 2000 + */ +struct ia64_sal_systab { + u8 signature[4]; /* should be "SST_" */ + u32 size; /* size of this table in bytes */ + u8 sal_rev_minor; + u8 sal_rev_major; + u16 entry_count; /* # of entries in variable portion */ + u8 checksum; + u8 reserved1[7]; + u8 sal_a_rev_minor; + u8 sal_a_rev_major; + u8 sal_b_rev_minor; + u8 sal_b_rev_major; + /* oem_id & product_id: terminating NUL is missing if string is exactly 32 bytes long. */ + u8 oem_id[32]; + u8 product_id[32]; /* ASCII product id */ + u8 reserved2[8]; +}; + +enum sal_systab_entry_type { + SAL_DESC_ENTRY_POINT = 0, + SAL_DESC_MEMORY = 1, + SAL_DESC_PLATFORM_FEATURE = 2, + SAL_DESC_TR = 3, + SAL_DESC_PTC = 4, + SAL_DESC_AP_WAKEUP = 5 +}; + +/* + * Entry type: Size: + * 0 48 + * 1 32 + * 2 16 + * 3 32 + * 4 16 + * 5 16 + */ +#define SAL_DESC_SIZE(type) "\060\040\020\040\020\020"[(unsigned) type] + +typedef struct ia64_sal_desc_entry_point { + u8 type; + u8 reserved1[7]; + u64 pal_proc; + u64 sal_proc; + u64 gp; + u8 reserved2[16]; +}ia64_sal_desc_entry_point_t; + +typedef struct ia64_sal_desc_memory { + u8 type; + u8 used_by_sal; /* needs to be mapped for SAL? */ + u8 mem_attr; /* current memory attribute setting */ + u8 access_rights; /* access rights set up by SAL */ + u8 mem_attr_mask; /* mask of supported memory attributes */ + u8 reserved1; + u8 mem_type; /* memory type */ + u8 mem_usage; /* memory usage */ + u64 addr; /* physical address of memory */ + u32 length; /* length (multiple of 4KB pages) */ + u32 reserved2; + u8 oem_reserved[8]; +} ia64_sal_desc_memory_t; + +typedef struct ia64_sal_desc_platform_feature { + u8 type; + u8 feature_mask; + u8 reserved1[14]; +} ia64_sal_desc_platform_feature_t; + +typedef struct ia64_sal_desc_tr { + u8 type; + u8 tr_type; /* 0 == instruction, 1 == data */ + u8 regnum; /* translation register number */ + u8 reserved1[5]; + u64 addr; /* virtual address of area covered */ + u64 page_size; /* encoded page size */ + u8 reserved2[8]; +} ia64_sal_desc_tr_t; + +typedef struct ia64_sal_desc_ptc { + u8 type; + u8 reserved1[3]; + u32 num_domains; /* # of coherence domains */ + u64 domain_info; /* physical address of domain info table */ +} ia64_sal_desc_ptc_t; + +typedef struct ia64_sal_ptc_domain_info { + u64 proc_count; /* number of processors in domain */ + u64 proc_list; /* physical address of LID array */ +} ia64_sal_ptc_domain_info_t; + +typedef struct ia64_sal_ptc_domain_proc_entry { + u64 id : 8; /* id of processor */ + u64 eid : 8; /* eid of processor */ +} ia64_sal_ptc_domain_proc_entry_t; + + +#define IA64_SAL_AP_EXTERNAL_INT 0 + +typedef struct ia64_sal_desc_ap_wakeup { + u8 type; + u8 mechanism; /* 0 == external interrupt */ + u8 reserved1[6]; + u64 vector; /* interrupt vector in range 0x10-0xff */ +} ia64_sal_desc_ap_wakeup_t ; + +extern ia64_sal_handler ia64_sal; +extern struct ia64_sal_desc_ptc *ia64_ptc_domain_info; + +extern unsigned short sal_revision; /* supported SAL spec revision */ +extern unsigned short sal_version; /* SAL version; OEM dependent */ +#define SAL_VERSION_CODE(major, minor) ((BIN2BCD(major) << 8) | BIN2BCD(minor)) + +extern const char *ia64_sal_strerror (long status); +extern void ia64_sal_init (struct ia64_sal_systab *sal_systab); + +/* SAL information type encodings */ +enum { + SAL_INFO_TYPE_MCA = 0, /* Machine check abort information */ + SAL_INFO_TYPE_INIT = 1, /* Init information */ + SAL_INFO_TYPE_CMC = 2, /* Corrected machine check information */ + SAL_INFO_TYPE_CPE = 3 /* Corrected platform error information */ +}; + +/* Encodings for machine check parameter types */ +enum { + SAL_MC_PARAM_RENDEZ_INT = 1, /* Rendezvous interrupt */ + SAL_MC_PARAM_RENDEZ_WAKEUP = 2, /* Wakeup */ + SAL_MC_PARAM_CPE_INT = 3 /* Corrected Platform Error Int */ +}; + +/* Encodings for rendezvous mechanisms */ +enum { + SAL_MC_PARAM_MECHANISM_INT = 1, /* Use interrupt */ + SAL_MC_PARAM_MECHANISM_MEM = 2 /* Use memory synchronization variable*/ +}; + +/* Encodings for vectors which can be registered by the OS with SAL */ +enum { + SAL_VECTOR_OS_MCA = 0, + SAL_VECTOR_OS_INIT = 1, + SAL_VECTOR_OS_BOOT_RENDEZ = 2 +}; + +/* Encodings for mca_opt parameter sent to SAL_MC_SET_PARAMS */ +#define SAL_MC_PARAM_RZ_ALWAYS 0x1 +#define SAL_MC_PARAM_BINIT_ESCALATE 0x10 + +/* + * Definition of the SAL Error Log from the SAL spec + */ + +/* SAL Error Record Section GUID Definitions */ +#define SAL_PROC_DEV_ERR_SECT_GUID \ + EFI_GUID(0xe429faf1, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) +#define SAL_PLAT_MEM_DEV_ERR_SECT_GUID \ + EFI_GUID(0xe429faf2, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) +#define SAL_PLAT_SEL_DEV_ERR_SECT_GUID \ + EFI_GUID(0xe429faf3, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) +#define SAL_PLAT_PCI_BUS_ERR_SECT_GUID \ + EFI_GUID(0xe429faf4, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) +#define SAL_PLAT_SMBIOS_DEV_ERR_SECT_GUID \ + EFI_GUID(0xe429faf5, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) +#define SAL_PLAT_PCI_COMP_ERR_SECT_GUID \ + EFI_GUID(0xe429faf6, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) +#define SAL_PLAT_SPECIFIC_ERR_SECT_GUID \ + EFI_GUID(0xe429faf7, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) +#define SAL_PLAT_HOST_CTLR_ERR_SECT_GUID \ + EFI_GUID(0xe429faf8, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) +#define SAL_PLAT_BUS_ERR_SECT_GUID \ + EFI_GUID(0xe429faf9, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) +#define PROCESSOR_ABSTRACTION_LAYER_OVERWRITE_GUID \ + EFI_GUID(0x6cb0a200, 0x893a, 0x11da, 0x96, 0xd2, 0x0, 0x10, 0x83, 0xff, \ + 0xca, 0x4d) + +#define MAX_CACHE_ERRORS 6 +#define MAX_TLB_ERRORS 6 +#define MAX_BUS_ERRORS 1 + +/* Definition of version according to SAL spec for logging purposes */ +typedef struct sal_log_revision { + u8 minor; /* BCD (0..99) */ + u8 major; /* BCD (0..99) */ +} sal_log_revision_t; + +/* Definition of timestamp according to SAL spec for logging purposes */ +typedef struct sal_log_timestamp { + u8 slh_second; /* Second (0..59) */ + u8 slh_minute; /* Minute (0..59) */ + u8 slh_hour; /* Hour (0..23) */ + u8 slh_reserved; + u8 slh_day; /* Day (1..31) */ + u8 slh_month; /* Month (1..12) */ + u8 slh_year; /* Year (00..99) */ + u8 slh_century; /* Century (19, 20, 21, ...) */ +} sal_log_timestamp_t; + +/* Definition of log record header structures */ +typedef struct sal_log_record_header { + u64 id; /* Unique monotonically increasing ID */ + sal_log_revision_t revision; /* Major and Minor revision of header */ + u8 severity; /* Error Severity */ + u8 validation_bits; /* 0: platform_guid, 1: !timestamp */ + u32 len; /* Length of this error log in bytes */ + sal_log_timestamp_t timestamp; /* Timestamp */ + efi_guid_t platform_guid; /* Unique OEM Platform ID */ +} sal_log_record_header_t; + +#define sal_log_severity_recoverable 0 +#define sal_log_severity_fatal 1 +#define sal_log_severity_corrected 2 + +/* Definition of log section header structures */ +typedef struct sal_log_sec_header { + efi_guid_t guid; /* Unique Section ID */ + sal_log_revision_t revision; /* Major and Minor revision of Section */ + u16 reserved; + u32 len; /* Section length */ +} sal_log_section_hdr_t; + +typedef struct sal_log_mod_error_info { + struct { + u64 check_info : 1, + requestor_identifier : 1, + responder_identifier : 1, + target_identifier : 1, + precise_ip : 1, + reserved : 59; + } valid; + u64 check_info; + u64 requestor_identifier; + u64 responder_identifier; + u64 target_identifier; + u64 precise_ip; +} sal_log_mod_error_info_t; + +typedef struct sal_processor_static_info { + struct { + u64 minstate : 1, + br : 1, + cr : 1, + ar : 1, + rr : 1, + fr : 1, + reserved : 58; + } valid; + pal_min_state_area_t min_state_area; + u64 br[8]; + u64 cr[128]; + u64 ar[128]; + u64 rr[8]; + struct ia64_fpreg __attribute__ ((packed)) fr[128]; +} sal_processor_static_info_t; + +struct sal_cpuid_info { + u64 regs[5]; + u64 reserved; +}; + +typedef struct sal_log_processor_info { + sal_log_section_hdr_t header; + struct { + u64 proc_error_map : 1, + proc_state_param : 1, + proc_cr_lid : 1, + psi_static_struct : 1, + num_cache_check : 4, + num_tlb_check : 4, + num_bus_check : 4, + num_reg_file_check : 4, + num_ms_check : 4, + cpuid_info : 1, + reserved1 : 39; + } valid; + u64 proc_error_map; + u64 proc_state_parameter; + u64 proc_cr_lid; + /* + * The rest of this structure consists of variable-length arrays, which can't be + * expressed in C. + */ + sal_log_mod_error_info_t info[0]; + /* + * This is what the rest looked like if C supported variable-length arrays: + * + * sal_log_mod_error_info_t cache_check_info[.valid.num_cache_check]; + * sal_log_mod_error_info_t tlb_check_info[.valid.num_tlb_check]; + * sal_log_mod_error_info_t bus_check_info[.valid.num_bus_check]; + * sal_log_mod_error_info_t reg_file_check_info[.valid.num_reg_file_check]; + * sal_log_mod_error_info_t ms_check_info[.valid.num_ms_check]; + * struct sal_cpuid_info cpuid_info; + * sal_processor_static_info_t processor_static_info; + */ +} sal_log_processor_info_t; + +/* Given a sal_log_processor_info_t pointer, return a pointer to the processor_static_info: */ +#define SAL_LPI_PSI_INFO(l) \ +({ sal_log_processor_info_t *_l = (l); \ + ((sal_processor_static_info_t *) \ + ((char *) _l->info + ((_l->valid.num_cache_check + _l->valid.num_tlb_check \ + + _l->valid.num_bus_check + _l->valid.num_reg_file_check \ + + _l->valid.num_ms_check) * sizeof(sal_log_mod_error_info_t) \ + + sizeof(struct sal_cpuid_info)))); \ +}) + +/* platform error log structures */ + +typedef struct sal_log_mem_dev_err_info { + sal_log_section_hdr_t header; + struct { + u64 error_status : 1, + physical_addr : 1, + addr_mask : 1, + node : 1, + card : 1, + module : 1, + bank : 1, + device : 1, + row : 1, + column : 1, + bit_position : 1, + requestor_id : 1, + responder_id : 1, + target_id : 1, + bus_spec_data : 1, + oem_id : 1, + oem_data : 1, + reserved : 47; + } valid; + u64 error_status; + u64 physical_addr; + u64 addr_mask; + u16 node; + u16 card; + u16 module; + u16 bank; + u16 device; + u16 row; + u16 column; + u16 bit_position; + u64 requestor_id; + u64 responder_id; + u64 target_id; + u64 bus_spec_data; + u8 oem_id[16]; + u8 oem_data[1]; /* Variable length data */ +} sal_log_mem_dev_err_info_t; + +typedef struct sal_log_sel_dev_err_info { + sal_log_section_hdr_t header; + struct { + u64 record_id : 1, + record_type : 1, + generator_id : 1, + evm_rev : 1, + sensor_type : 1, + sensor_num : 1, + event_dir : 1, + event_data1 : 1, + event_data2 : 1, + event_data3 : 1, + reserved : 54; + } valid; + u16 record_id; + u8 record_type; + u8 timestamp[4]; + u16 generator_id; + u8 evm_rev; + u8 sensor_type; + u8 sensor_num; + u8 event_dir; + u8 event_data1; + u8 event_data2; + u8 event_data3; +} sal_log_sel_dev_err_info_t; + +typedef struct sal_log_pci_bus_err_info { + sal_log_section_hdr_t header; + struct { + u64 err_status : 1, + err_type : 1, + bus_id : 1, + bus_address : 1, + bus_data : 1, + bus_cmd : 1, + requestor_id : 1, + responder_id : 1, + target_id : 1, + oem_data : 1, + reserved : 54; + } valid; + u64 err_status; + u16 err_type; + u16 bus_id; + u32 reserved; + u64 bus_address; + u64 bus_data; + u64 bus_cmd; + u64 requestor_id; + u64 responder_id; + u64 target_id; + u8 oem_data[1]; /* Variable length data */ +} sal_log_pci_bus_err_info_t; + +typedef struct sal_log_smbios_dev_err_info { + sal_log_section_hdr_t header; + struct { + u64 event_type : 1, + length : 1, + time_stamp : 1, + data : 1, + reserved1 : 60; + } valid; + u8 event_type; + u8 length; + u8 time_stamp[6]; + u8 data[1]; /* data of variable length, length == slsmb_length */ +} sal_log_smbios_dev_err_info_t; + +typedef struct sal_log_pci_comp_err_info { + sal_log_section_hdr_t header; + struct { + u64 err_status : 1, + comp_info : 1, + num_mem_regs : 1, + num_io_regs : 1, + reg_data_pairs : 1, + oem_data : 1, + reserved : 58; + } valid; + u64 err_status; + struct { + u16 vendor_id; + u16 device_id; + u8 class_code[3]; + u8 func_num; + u8 dev_num; + u8 bus_num; + u8 seg_num; + u8 reserved[5]; + } comp_info; + u32 num_mem_regs; + u32 num_io_regs; + u64 reg_data_pairs[1]; + /* + * array of address/data register pairs is num_mem_regs + num_io_regs elements + * long. Each array element consists of a u64 address followed by a u64 data + * value. The oem_data array immediately follows the reg_data_pairs array + */ + u8 oem_data[1]; /* Variable length data */ +} sal_log_pci_comp_err_info_t; + +typedef struct sal_log_plat_specific_err_info { + sal_log_section_hdr_t header; + struct { + u64 err_status : 1, + guid : 1, + oem_data : 1, + reserved : 61; + } valid; + u64 err_status; + efi_guid_t guid; + u8 oem_data[1]; /* platform specific variable length data */ +} sal_log_plat_specific_err_info_t; + +typedef struct sal_log_host_ctlr_err_info { + sal_log_section_hdr_t header; + struct { + u64 err_status : 1, + requestor_id : 1, + responder_id : 1, + target_id : 1, + bus_spec_data : 1, + oem_data : 1, + reserved : 58; + } valid; + u64 err_status; + u64 requestor_id; + u64 responder_id; + u64 target_id; + u64 bus_spec_data; + u8 oem_data[1]; /* Variable length OEM data */ +} sal_log_host_ctlr_err_info_t; + +typedef struct sal_log_plat_bus_err_info { + sal_log_section_hdr_t header; + struct { + u64 err_status : 1, + requestor_id : 1, + responder_id : 1, + target_id : 1, + bus_spec_data : 1, + oem_data : 1, + reserved : 58; + } valid; + u64 err_status; + u64 requestor_id; + u64 responder_id; + u64 target_id; + u64 bus_spec_data; + u8 oem_data[1]; /* Variable length OEM data */ +} sal_log_plat_bus_err_info_t; + +/* Overall platform error section structure */ +typedef union sal_log_platform_err_info { + sal_log_mem_dev_err_info_t mem_dev_err; + sal_log_sel_dev_err_info_t sel_dev_err; + sal_log_pci_bus_err_info_t pci_bus_err; + sal_log_smbios_dev_err_info_t smbios_dev_err; + sal_log_pci_comp_err_info_t pci_comp_err; + sal_log_plat_specific_err_info_t plat_specific_err; + sal_log_host_ctlr_err_info_t host_ctlr_err; + sal_log_plat_bus_err_info_t plat_bus_err; +} sal_log_platform_err_info_t; + +/* SAL log over-all, multi-section error record structure (processor+platform) */ +typedef struct err_rec { + sal_log_record_header_t sal_elog_header; + sal_log_processor_info_t proc_err; + sal_log_platform_err_info_t plat_err; + u8 oem_data_pad[1024]; +} ia64_err_rec_t; + +/* + * Now define a couple of inline functions for improved type checking + * and convenience. + */ + +extern s64 ia64_sal_cache_flush (u64 cache_type); +extern void __init check_sal_cache_flush (void); + +/* Initialize all the processor and platform level instruction and data caches */ +static inline s64 +ia64_sal_cache_init (void) +{ + struct ia64_sal_retval isrv; + SAL_CALL(isrv, SAL_CACHE_INIT, 0, 0, 0, 0, 0, 0, 0); + return isrv.status; +} + +/* + * Clear the processor and platform information logged by SAL with respect to the machine + * state at the time of MCA's, INITs, CMCs, or CPEs. + */ +static inline s64 +ia64_sal_clear_state_info (u64 sal_info_type) +{ + struct ia64_sal_retval isrv; + SAL_CALL_REENTRANT(isrv, SAL_CLEAR_STATE_INFO, sal_info_type, 0, + 0, 0, 0, 0, 0); + return isrv.status; +} + + +/* Get the processor and platform information logged by SAL with respect to the machine + * state at the time of the MCAs, INITs, CMCs, or CPEs. + */ +static inline u64 +ia64_sal_get_state_info (u64 sal_info_type, u64 *sal_info) +{ + struct ia64_sal_retval isrv; + SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO, sal_info_type, 0, + sal_info, 0, 0, 0, 0); + if (isrv.status) + return 0; + + return isrv.v0; +} + +/* + * Get the maximum size of the information logged by SAL with respect to the machine state + * at the time of MCAs, INITs, CMCs, or CPEs. + */ +static inline u64 +ia64_sal_get_state_info_size (u64 sal_info_type) +{ + struct ia64_sal_retval isrv; + SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO_SIZE, sal_info_type, 0, + 0, 0, 0, 0, 0); + if (isrv.status) + return 0; + return isrv.v0; +} + +/* + * Causes the processor to go into a spin loop within SAL where SAL awaits a wakeup from + * the monarch processor. Must not lock, because it will not return on any cpu until the + * monarch processor sends a wake up. + */ +static inline s64 +ia64_sal_mc_rendez (void) +{ + struct ia64_sal_retval isrv; + SAL_CALL_NOLOCK(isrv, SAL_MC_RENDEZ, 0, 0, 0, 0, 0, 0, 0); + return isrv.status; +} + +/* + * Allow the OS to specify the interrupt number to be used by SAL to interrupt OS during + * the machine check rendezvous sequence as well as the mechanism to wake up the + * non-monarch processor at the end of machine check processing. + * Returns the complete ia64_sal_retval because some calls return more than just a status + * value. + */ +static inline struct ia64_sal_retval +ia64_sal_mc_set_params (u64 param_type, u64 i_or_m, u64 i_or_m_val, u64 timeout, u64 rz_always) +{ + struct ia64_sal_retval isrv; + SAL_CALL(isrv, SAL_MC_SET_PARAMS, param_type, i_or_m, i_or_m_val, + timeout, rz_always, 0, 0); + return isrv; +} + +/* Read from PCI configuration space */ +static inline s64 +ia64_sal_pci_config_read (u64 pci_config_addr, int type, u64 size, u64 *value) +{ + struct ia64_sal_retval isrv; + SAL_CALL(isrv, SAL_PCI_CONFIG_READ, pci_config_addr, size, type, 0, 0, 0, 0); + if (value) + *value = isrv.v0; + return isrv.status; +} + +/* Write to PCI configuration space */ +static inline s64 +ia64_sal_pci_config_write (u64 pci_config_addr, int type, u64 size, u64 value) +{ + struct ia64_sal_retval isrv; + SAL_CALL(isrv, SAL_PCI_CONFIG_WRITE, pci_config_addr, size, value, + type, 0, 0, 0); + return isrv.status; +} + +/* + * Register physical addresses of locations needed by SAL when SAL procedures are invoked + * in virtual mode. + */ +static inline s64 +ia64_sal_register_physical_addr (u64 phys_entry, u64 phys_addr) +{ + struct ia64_sal_retval isrv; + SAL_CALL(isrv, SAL_REGISTER_PHYSICAL_ADDR, phys_entry, phys_addr, + 0, 0, 0, 0, 0); + return isrv.status; +} + +/* + * Register software dependent code locations within SAL. These locations are handlers or + * entry points where SAL will pass control for the specified event. These event handlers + * are for the bott rendezvous, MCAs and INIT scenarios. + */ +static inline s64 +ia64_sal_set_vectors (u64 vector_type, + u64 handler_addr1, u64 gp1, u64 handler_len1, + u64 handler_addr2, u64 gp2, u64 handler_len2) +{ + struct ia64_sal_retval isrv; + SAL_CALL(isrv, SAL_SET_VECTORS, vector_type, + handler_addr1, gp1, handler_len1, + handler_addr2, gp2, handler_len2); + + return isrv.status; +} + +/* Update the contents of PAL block in the non-volatile storage device */ +static inline s64 +ia64_sal_update_pal (u64 param_buf, u64 scratch_buf, u64 scratch_buf_size, + u64 *error_code, u64 *scratch_buf_size_needed) +{ + struct ia64_sal_retval isrv; + SAL_CALL(isrv, SAL_UPDATE_PAL, param_buf, scratch_buf, scratch_buf_size, + 0, 0, 0, 0); + if (error_code) + *error_code = isrv.v0; + if (scratch_buf_size_needed) + *scratch_buf_size_needed = isrv.v1; + return isrv.status; +} + +/* Get physical processor die mapping in the platform. */ +static inline s64 +ia64_sal_physical_id_info(u16 *splid) +{ + struct ia64_sal_retval isrv; + + if (sal_revision < SAL_VERSION_CODE(3,2)) + return -1; + + SAL_CALL(isrv, SAL_PHYSICAL_ID_INFO, 0, 0, 0, 0, 0, 0, 0); + if (splid) + *splid = isrv.v0; + return isrv.status; +} + +extern unsigned long sal_platform_features; + +extern int (*salinfo_platform_oemdata)(const u8 *, u8 **, u64 *); + +struct sal_ret_values { + long r8; long r9; long r10; long r11; +}; + +#define IA64_SAL_OEMFUNC_MIN 0x02000000 +#define IA64_SAL_OEMFUNC_MAX 0x03ffffff + +extern int ia64_sal_oemcall(struct ia64_sal_retval *, u64, u64, u64, u64, u64, + u64, u64, u64); +extern int ia64_sal_oemcall_nolock(struct ia64_sal_retval *, u64, u64, u64, + u64, u64, u64, u64, u64); +extern int ia64_sal_oemcall_reentrant(struct ia64_sal_retval *, u64, u64, u64, + u64, u64, u64, u64, u64); +extern long +ia64_sal_freq_base (unsigned long which, unsigned long *ticks_per_second, + unsigned long *drift_info); +#ifdef CONFIG_HOTPLUG_CPU +/* + * System Abstraction Layer Specification + * Section 3.2.5.1: OS_BOOT_RENDEZ to SAL return State. + * Note: region regs are stored first in head.S _start. Hence they must + * stay up front. + */ +struct sal_to_os_boot { + u64 rr[8]; /* Region Registers */ + u64 br[6]; /* br0: + * return addr into SAL boot rendez routine */ + u64 gr1; /* SAL:GP */ + u64 gr12; /* SAL:SP */ + u64 gr13; /* SAL: Task Pointer */ + u64 fpsr; + u64 pfs; + u64 rnat; + u64 unat; + u64 bspstore; + u64 dcr; /* Default Control Register */ + u64 iva; + u64 pta; + u64 itv; + u64 pmv; + u64 cmcv; + u64 lrr[2]; + u64 gr[4]; + u64 pr; /* Predicate registers */ + u64 lc; /* Loop Count */ + struct ia64_fpreg fp[20]; +}; + +/* + * Global array allocated for NR_CPUS at boot time + */ +extern struct sal_to_os_boot sal_boot_rendez_state[NR_CPUS]; + +extern void ia64_jump_to_sal(struct sal_to_os_boot *); +#endif + +extern void ia64_sal_handler_init(void *entry_point, void *gpval); + +#define PALO_MAX_TLB_PURGES 0xFFFF +#define PALO_SIG "PALO" + +struct palo_table { + u8 signature[4]; /* Should be "PALO" */ + u32 length; + u8 minor_revision; + u8 major_revision; + u8 checksum; + u8 reserved1[5]; + u16 max_tlb_purges; + u8 reserved2[6]; +}; + +#define NPTCG_FROM_PAL 0 +#define NPTCG_FROM_PALO 1 +#define NPTCG_FROM_KERNEL_PARAMETER 2 + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_IA64_SAL_H */ diff --git a/arch/ia64/include/asm/scatterlist.h b/arch/ia64/include/asm/scatterlist.h new file mode 100644 index 000000000000..d6f57874041d --- /dev/null +++ b/arch/ia64/include/asm/scatterlist.h @@ -0,0 +1,38 @@ +#ifndef _ASM_IA64_SCATTERLIST_H +#define _ASM_IA64_SCATTERLIST_H + +/* + * Modified 1998-1999, 2001-2002, 2004 + * David Mosberger-Tang , Hewlett-Packard Co + */ + +#include + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + unsigned int length; /* buffer length */ + + dma_addr_t dma_address; + unsigned int dma_length; +}; + +/* + * It used to be that ISA_DMA_THRESHOLD had something to do with the + * DMA-limits of ISA-devices. Nowadays, its only remaining use (apart + * from the aha1542.c driver, which isn't 64-bit clean anyhow) is to + * tell the block-layer (via BLK_BOUNCE_ISA) what the max. physical + * address of a page is that is allocated with GFP_DMA. On IA-64, + * that's 4GB - 1. + */ +#define ISA_DMA_THRESHOLD 0xffffffff + +#define sg_dma_len(sg) ((sg)->dma_length) +#define sg_dma_address(sg) ((sg)->dma_address) + +#define ARCH_HAS_SG_CHAIN + +#endif /* _ASM_IA64_SCATTERLIST_H */ diff --git a/arch/ia64/include/asm/sections.h b/arch/ia64/include/asm/sections.h new file mode 100644 index 000000000000..7286e4a9fe84 --- /dev/null +++ b/arch/ia64/include/asm/sections.h @@ -0,0 +1,25 @@ +#ifndef _ASM_IA64_SECTIONS_H +#define _ASM_IA64_SECTIONS_H + +/* + * Copyright (C) 1998-2003 Hewlett-Packard Co + * David Mosberger-Tang + */ + +#include + +extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[]; +extern char __start___vtop_patchlist[], __end___vtop_patchlist[]; +extern char __start___rse_patchlist[], __end___rse_patchlist[]; +extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[]; +extern char __start___phys_stack_reg_patchlist[], __end___phys_stack_reg_patchlist[]; +extern char __start_gate_section[]; +extern char __start_gate_mckinley_e9_patchlist[], __end_gate_mckinley_e9_patchlist[]; +extern char __start_gate_vtop_patchlist[], __end_gate_vtop_patchlist[]; +extern char __start_gate_fsyscall_patchlist[], __end_gate_fsyscall_patchlist[]; +extern char __start_gate_brl_fsys_bubble_down_patchlist[], __end_gate_brl_fsys_bubble_down_patchlist[]; +extern char __start_unwind[], __end_unwind[]; +extern char __start_ivt_text[], __end_ivt_text[]; + +#endif /* _ASM_IA64_SECTIONS_H */ + diff --git a/arch/ia64/include/asm/segment.h b/arch/ia64/include/asm/segment.h new file mode 100644 index 000000000000..b89e2b3d648f --- /dev/null +++ b/arch/ia64/include/asm/segment.h @@ -0,0 +1,6 @@ +#ifndef _ASM_IA64_SEGMENT_H +#define _ASM_IA64_SEGMENT_H + +/* Only here because we have some old header files that expect it.. */ + +#endif /* _ASM_IA64_SEGMENT_H */ diff --git a/arch/ia64/include/asm/sembuf.h b/arch/ia64/include/asm/sembuf.h new file mode 100644 index 000000000000..1340fbc04d3e --- /dev/null +++ b/arch/ia64/include/asm/sembuf.h @@ -0,0 +1,22 @@ +#ifndef _ASM_IA64_SEMBUF_H +#define _ASM_IA64_SEMBUF_H + +/* + * The semid64_ds structure for IA-64 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 2 miscellaneous 64-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + __kernel_time_t sem_ctime; /* last change time */ + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ASM_IA64_SEMBUF_H */ diff --git a/arch/ia64/include/asm/serial.h b/arch/ia64/include/asm/serial.h new file mode 100644 index 000000000000..068be11583df --- /dev/null +++ b/arch/ia64/include/asm/serial.h @@ -0,0 +1,17 @@ +/* + * Derived from the i386 version. + */ + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD ( 1843200 / 16 ) + +/* + * All legacy serial ports should be enumerated via ACPI namespace, so + * we need not list them here. + */ diff --git a/arch/ia64/include/asm/setup.h b/arch/ia64/include/asm/setup.h new file mode 100644 index 000000000000..4399a44355b3 --- /dev/null +++ b/arch/ia64/include/asm/setup.h @@ -0,0 +1,6 @@ +#ifndef __IA64_SETUP_H +#define __IA64_SETUP_H + +#define COMMAND_LINE_SIZE 2048 + +#endif diff --git a/arch/ia64/include/asm/shmbuf.h b/arch/ia64/include/asm/shmbuf.h new file mode 100644 index 000000000000..585002a77acd --- /dev/null +++ b/arch/ia64/include/asm/shmbuf.h @@ -0,0 +1,38 @@ +#ifndef _ASM_IA64_SHMBUF_H +#define _ASM_IA64_SHMBUF_H + +/* + * The shmid64_ds structure for IA-64 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 2 miscellaneous 64-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + __kernel_time_t shm_dtime; /* last detach time */ + __kernel_time_t shm_ctime; /* last change time */ + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused1; + unsigned long __unused2; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_IA64_SHMBUF_H */ diff --git a/arch/ia64/include/asm/shmparam.h b/arch/ia64/include/asm/shmparam.h new file mode 100644 index 000000000000..d07508dc54ae --- /dev/null +++ b/arch/ia64/include/asm/shmparam.h @@ -0,0 +1,12 @@ +#ifndef _ASM_IA64_SHMPARAM_H +#define _ASM_IA64_SHMPARAM_H + +/* + * SHMLBA controls minimum alignment at which shared memory segments + * get attached. The IA-64 architecture says that there may be a + * performance degradation when there are virtual aliases within 1MB. + * To reduce the chance of this, we set SHMLBA to 1MB. --davidm 00/12/20 + */ +#define SHMLBA (1024*1024) + +#endif /* _ASM_IA64_SHMPARAM_H */ diff --git a/arch/ia64/include/asm/sigcontext.h b/arch/ia64/include/asm/sigcontext.h new file mode 100644 index 000000000000..57ff777bcc40 --- /dev/null +++ b/arch/ia64/include/asm/sigcontext.h @@ -0,0 +1,70 @@ +#ifndef _ASM_IA64_SIGCONTEXT_H +#define _ASM_IA64_SIGCONTEXT_H + +/* + * Copyright (C) 1998, 1999, 2001 Hewlett-Packard Co + * Copyright (C) 1998, 1999, 2001 David Mosberger-Tang + */ + +#include + +#define IA64_SC_FLAG_ONSTACK_BIT 0 /* is handler running on signal stack? */ +#define IA64_SC_FLAG_IN_SYSCALL_BIT 1 /* did signal interrupt a syscall? */ +#define IA64_SC_FLAG_FPH_VALID_BIT 2 /* is state in f[32]-f[127] valid? */ + +#define IA64_SC_FLAG_ONSTACK (1 << IA64_SC_FLAG_ONSTACK_BIT) +#define IA64_SC_FLAG_IN_SYSCALL (1 << IA64_SC_FLAG_IN_SYSCALL_BIT) +#define IA64_SC_FLAG_FPH_VALID (1 << IA64_SC_FLAG_FPH_VALID_BIT) + +# ifndef __ASSEMBLY__ + +/* + * Note on handling of register backing store: sc_ar_bsp contains the address that would + * be found in ar.bsp after executing a "cover" instruction the context in which the + * signal was raised. If signal delivery required switching to an alternate signal stack + * (sc_rbs_base is not NULL), the "dirty" partition (as it would exist after executing the + * imaginary "cover" instruction) is backed by the *alternate* signal stack, not the + * original one. In this case, sc_rbs_base contains the base address of the new register + * backing store. The number of registers in the dirty partition can be calculated as: + * + * ndirty = ia64_rse_num_regs(sc_rbs_base, sc_rbs_base + (sc_loadrs >> 16)) + * + */ + +struct sigcontext { + unsigned long sc_flags; /* see manifest constants above */ + unsigned long sc_nat; /* bit i == 1 iff scratch reg gr[i] is a NaT */ + stack_t sc_stack; /* previously active stack */ + + unsigned long sc_ip; /* instruction pointer */ + unsigned long sc_cfm; /* current frame marker */ + unsigned long sc_um; /* user mask bits */ + unsigned long sc_ar_rsc; /* register stack configuration register */ + unsigned long sc_ar_bsp; /* backing store pointer */ + unsigned long sc_ar_rnat; /* RSE NaT collection register */ + unsigned long sc_ar_ccv; /* compare and exchange compare value register */ + unsigned long sc_ar_unat; /* ar.unat of interrupted context */ + unsigned long sc_ar_fpsr; /* floating-point status register */ + unsigned long sc_ar_pfs; /* previous function state */ + unsigned long sc_ar_lc; /* loop count register */ + unsigned long sc_pr; /* predicate registers */ + unsigned long sc_br[8]; /* branch registers */ + /* Note: sc_gr[0] is used as the "uc_link" member of ucontext_t */ + unsigned long sc_gr[32]; /* general registers (static partition) */ + struct ia64_fpreg sc_fr[128]; /* floating-point registers */ + + unsigned long sc_rbs_base; /* NULL or new base of sighandler's rbs */ + unsigned long sc_loadrs; /* see description above */ + + unsigned long sc_ar25; /* cmp8xchg16 uses this */ + unsigned long sc_ar26; /* rsvd for scratch use */ + unsigned long sc_rsvd[12]; /* reserved for future use */ + /* + * The mask must come last so we can increase _NSIG_WORDS + * without breaking binary compatibility. + */ + sigset_t sc_mask; /* signal mask to restore after handler returns */ +}; + +# endif /* __ASSEMBLY__ */ +#endif /* _ASM_IA64_SIGCONTEXT_H */ diff --git a/arch/ia64/include/asm/siginfo.h b/arch/ia64/include/asm/siginfo.h new file mode 100644 index 000000000000..9294e4b0c8bc --- /dev/null +++ b/arch/ia64/include/asm/siginfo.h @@ -0,0 +1,139 @@ +#ifndef _ASM_IA64_SIGINFO_H +#define _ASM_IA64_SIGINFO_H + +/* + * Based on . + * + * Modified 1998-2002 + * David Mosberger-Tang , Hewlett-Packard Co + */ + +#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) + +#define HAVE_ARCH_SIGINFO_T +#define HAVE_ARCH_COPY_SIGINFO +#define HAVE_ARCH_COPY_SIGINFO_TO_USER + +#include + +typedef struct siginfo { + int si_signo; + int si_errno; + int si_code; + int __pad0; + + union { + int _pad[SI_PAD_SIZE]; + + /* kill() */ + struct { + pid_t _pid; /* sender's pid */ + uid_t _uid; /* sender's uid */ + } _kill; + + /* POSIX.1b timers */ + struct { + timer_t _tid; /* timer id */ + int _overrun; /* overrun count */ + char _pad[sizeof(__ARCH_SI_UID_T) - sizeof(int)]; + sigval_t _sigval; /* must overlay ._rt._sigval! */ + int _sys_private; /* not to be passed to user */ + } _timer; + + /* POSIX.1b signals */ + struct { + pid_t _pid; /* sender's pid */ + uid_t _uid; /* sender's uid */ + sigval_t _sigval; + } _rt; + + /* SIGCHLD */ + struct { + pid_t _pid; /* which child */ + uid_t _uid; /* sender's uid */ + int _status; /* exit code */ + clock_t _utime; + clock_t _stime; + } _sigchld; + + /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ + struct { + void __user *_addr; /* faulting insn/memory ref. */ + int _imm; /* immediate value for "break" */ + unsigned int _flags; /* see below */ + unsigned long _isr; /* isr */ + } _sigfault; + + /* SIGPOLL */ + struct { + long _band; /* POLL_IN, POLL_OUT, POLL_MSG (XPG requires a "long") */ + int _fd; + } _sigpoll; + } _sifields; +} siginfo_t; + +#define si_imm _sifields._sigfault._imm /* as per UNIX SysV ABI spec */ +#define si_flags _sifields._sigfault._flags +/* + * si_isr is valid for SIGILL, SIGFPE, SIGSEGV, SIGBUS, and SIGTRAP provided that + * si_code is non-zero and __ISR_VALID is set in si_flags. + */ +#define si_isr _sifields._sigfault._isr + +/* + * Flag values for si_flags: + */ +#define __ISR_VALID_BIT 0 +#define __ISR_VALID (1 << __ISR_VALID_BIT) + +/* + * SIGILL si_codes + */ +#define ILL_BADIADDR (__SI_FAULT|9) /* unimplemented instruction address */ +#define __ILL_BREAK (__SI_FAULT|10) /* illegal break */ +#define __ILL_BNDMOD (__SI_FAULT|11) /* bundle-update (modification) in progress */ +#undef NSIGILL +#define NSIGILL 11 + +/* + * SIGFPE si_codes + */ +#define __FPE_DECOVF (__SI_FAULT|9) /* decimal overflow */ +#define __FPE_DECDIV (__SI_FAULT|10) /* decimal division by zero */ +#define __FPE_DECERR (__SI_FAULT|11) /* packed decimal error */ +#define __FPE_INVASC (__SI_FAULT|12) /* invalid ASCII digit */ +#define __FPE_INVDEC (__SI_FAULT|13) /* invalid decimal digit */ +#undef NSIGFPE +#define NSIGFPE 13 + +/* + * SIGSEGV si_codes + */ +#define __SEGV_PSTKOVF (__SI_FAULT|3) /* paragraph stack overflow */ +#undef NSIGSEGV +#define NSIGSEGV 3 + +/* + * SIGTRAP si_codes + */ +#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */ +#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint or watchpoint */ +#undef NSIGTRAP +#define NSIGTRAP 4 + +#ifdef __KERNEL__ +#include + +static inline void +copy_siginfo (siginfo_t *to, siginfo_t *from) +{ + if (from->si_code < 0) + memcpy(to, from, sizeof(siginfo_t)); + else + /* _sigchld is currently the largest know union member */ + memcpy(to, from, 4*sizeof(int) + sizeof(from->_sifields._sigchld)); +} + +#endif /* __KERNEL__ */ + +#endif /* _ASM_IA64_SIGINFO_H */ diff --git a/arch/ia64/include/asm/signal.h b/arch/ia64/include/asm/signal.h new file mode 100644 index 000000000000..4f5ca5643cb1 --- /dev/null +++ b/arch/ia64/include/asm/signal.h @@ -0,0 +1,160 @@ +#ifndef _ASM_IA64_SIGNAL_H +#define _ASM_IA64_SIGNAL_H + +/* + * Modified 1998-2001, 2003 + * David Mosberger-Tang , Hewlett-Packard Co + * + * Unfortunately, this file is being included by bits/signal.h in + * glibc-2.x. Hence the #ifdef __KERNEL__ ugliness. + */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +/* signal 31 is no longer "unused", but the SIGUNUSED macro remains for backwards compatibility */ +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +/* + * The minimum stack size needs to be fairly large because we want to + * be sure that an app compiled for today's CPUs will continue to run + * on all future CPU models. The CPU model matters because the signal + * frame needs to have space for the complete machine state, including + * all physical stacked registers. The number of physical stacked + * registers is CPU model dependent, but given that the width of + * ar.rsc.loadrs is 14 bits, we can assume that they'll never take up + * more than 16KB of space. + */ +#if 1 + /* + * This is a stupid typo: the value was _meant_ to be 131072 (0x20000), but I typed it + * in wrong. ;-( To preserve backwards compatibility, we leave the kernel at the + * incorrect value and fix libc only. + */ +# define MINSIGSTKSZ 131027 /* min. stack size for sigaltstack() */ +#else +# define MINSIGSTKSZ 131072 /* min. stack size for sigaltstack() */ +#endif +#define SIGSTKSZ 262144 /* default stack size for sigaltstack() */ + +#ifdef __KERNEL__ + +#define _NSIG 64 +#define _NSIG_BPW 64 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +#endif /* __KERNEL__ */ + +#include + +# ifndef __ASSEMBLY__ + +# include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ + +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +typedef unsigned long old_sigset_t; + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; + +# include + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +# endif /* !__ASSEMBLY__ */ +#endif /* _ASM_IA64_SIGNAL_H */ diff --git a/arch/ia64/include/asm/smp.h b/arch/ia64/include/asm/smp.h new file mode 100644 index 000000000000..12d96e0cd513 --- /dev/null +++ b/arch/ia64/include/asm/smp.h @@ -0,0 +1,138 @@ +/* + * SMP Support + * + * Copyright (C) 1999 VA Linux Systems + * Copyright (C) 1999 Walt Drummond + * (c) Copyright 2001-2003, 2005 Hewlett-Packard Development Company, L.P. + * David Mosberger-Tang + * Bjorn Helgaas + */ +#ifndef _ASM_IA64_SMP_H +#define _ASM_IA64_SMP_H + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +static inline unsigned int +ia64_get_lid (void) +{ + union { + struct { + unsigned long reserved : 16; + unsigned long eid : 8; + unsigned long id : 8; + unsigned long ignored : 32; + } f; + unsigned long bits; + } lid; + + lid.bits = ia64_getreg(_IA64_REG_CR_LID); + return lid.f.id << 8 | lid.f.eid; +} + +#define hard_smp_processor_id() ia64_get_lid() + +#ifdef CONFIG_SMP + +#define XTP_OFFSET 0x1e0008 + +#define SMP_IRQ_REDIRECTION (1 << 0) +#define SMP_IPI_REDIRECTION (1 << 1) + +#define raw_smp_processor_id() (current_thread_info()->cpu) + +extern struct smp_boot_data { + int cpu_count; + int cpu_phys_id[NR_CPUS]; +} smp_boot_data __initdata; + +extern char no_int_routing __devinitdata; + +extern cpumask_t cpu_online_map; +extern cpumask_t cpu_core_map[NR_CPUS]; +DECLARE_PER_CPU(cpumask_t, cpu_sibling_map); +extern int smp_num_siblings; +extern void __iomem *ipi_base_addr; +extern unsigned char smp_int_redirect; + +extern volatile int ia64_cpu_to_sapicid[]; +#define cpu_physical_id(i) ia64_cpu_to_sapicid[i] + +extern unsigned long ap_wakeup_vector; + +/* + * Function to map hard smp processor id to logical id. Slow, so don't use this in + * performance-critical code. + */ +static inline int +cpu_logical_id (int cpuid) +{ + int i; + + for (i = 0; i < NR_CPUS; ++i) + if (cpu_physical_id(i) == cpuid) + break; + return i; +} + +/* + * XTP control functions: + * min_xtp : route all interrupts to this CPU + * normal_xtp: nominal XTP value + * max_xtp : never deliver interrupts to this CPU. + */ + +static inline void +min_xtp (void) +{ + if (smp_int_redirect & SMP_IRQ_REDIRECTION) + writeb(0x00, ipi_base_addr + XTP_OFFSET); /* XTP to min */ +} + +static inline void +normal_xtp (void) +{ + if (smp_int_redirect & SMP_IRQ_REDIRECTION) + writeb(0x08, ipi_base_addr + XTP_OFFSET); /* XTP normal */ +} + +static inline void +max_xtp (void) +{ + if (smp_int_redirect & SMP_IRQ_REDIRECTION) + writeb(0x0f, ipi_base_addr + XTP_OFFSET); /* Set XTP to max */ +} + +/* Upping and downing of CPUs */ +extern int __cpu_disable (void); +extern void __cpu_die (unsigned int cpu); +extern void cpu_die (void) __attribute__ ((noreturn)); +extern void __init smp_build_cpu_map(void); + +extern void __init init_smp_config (void); +extern void smp_do_timer (struct pt_regs *regs); + +extern irqreturn_t handle_IPI(int irq, void *dev_id); +extern void smp_send_reschedule (int cpu); +extern void identify_siblings (struct cpuinfo_ia64 *); +extern int is_multithreading_enabled(void); + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi(cpumask_t mask); + +#else /* CONFIG_SMP */ + +#define cpu_logical_id(i) 0 +#define cpu_physical_id(i) ia64_get_lid() + +#endif /* CONFIG_SMP */ +#endif /* _ASM_IA64_SMP_H */ diff --git a/arch/ia64/include/asm/sn/acpi.h b/arch/ia64/include/asm/sn/acpi.h new file mode 100644 index 000000000000..9ce2801cbd57 --- /dev/null +++ b/arch/ia64/include/asm/sn/acpi.h @@ -0,0 +1,17 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_ACPI_H +#define _ASM_IA64_SN_ACPI_H + +#include "acpi/acglobal.h" + +extern int sn_acpi_rev; +#define SN_ACPI_BASE_SUPPORT() (sn_acpi_rev >= 0x20101) + +#endif /* _ASM_IA64_SN_ACPI_H */ diff --git a/arch/ia64/include/asm/sn/addrs.h b/arch/ia64/include/asm/sn/addrs.h new file mode 100644 index 000000000000..e715c794b186 --- /dev/null +++ b/arch/ia64/include/asm/sn/addrs.h @@ -0,0 +1,299 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1992-1999,2001-2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_ADDRS_H +#define _ASM_IA64_SN_ADDRS_H + +#include +#include +#include +#include + +/* + * Memory/SHUB Address Format: + * +-+---------+--+--------------+ + * |0| NASID |AS| NodeOffset | + * +-+---------+--+--------------+ + * + * NASID: (low NASID bit is 0) Memory and SHUB MMRs + * AS: 2-bit Address Space Identifier. Used only if low NASID bit is 0 + * 00: Local Resources and MMR space + * Top bit of NodeOffset + * 0: Local resources space + * node id: + * 0: IA64/NT compatibility space + * 2: Local MMR Space + * 4: Local memory, regardless of local node id + * 1: Global MMR space + * 01: GET space. + * 10: AMO space. + * 11: Cacheable memory space. + * + * NodeOffset: byte offset + * + * + * TIO address format: + * +-+----------+--+--------------+ + * |0| NASID |AS| Nodeoffset | + * +-+----------+--+--------------+ + * + * NASID: (low NASID bit is 1) TIO + * AS: 2-bit Chiplet Identifier + * 00: TIO LB (Indicates TIO MMR access.) + * 01: TIO ICE (indicates coretalk space access.) + * + * NodeOffset: top bit must be set. + * + * + * Note that in both of the above address formats, the low + * NASID bit indicates if the reference is to the SHUB or TIO MMRs. + */ + + +/* + * Define basic shift & mask constants for manipulating NASIDs and AS values. + */ +#define NASID_BITMASK (sn_hub_info->nasid_bitmask) +#define NASID_SHIFT (sn_hub_info->nasid_shift) +#define AS_SHIFT (sn_hub_info->as_shift) +#define AS_BITMASK 0x3UL + +#define NASID_MASK ((u64)NASID_BITMASK << NASID_SHIFT) +#define AS_MASK ((u64)AS_BITMASK << AS_SHIFT) + + +/* + * AS values. These are the same on both SHUB1 & SHUB2. + */ +#define AS_GET_VAL 1UL +#define AS_AMO_VAL 2UL +#define AS_CAC_VAL 3UL +#define AS_GET_SPACE (AS_GET_VAL << AS_SHIFT) +#define AS_AMO_SPACE (AS_AMO_VAL << AS_SHIFT) +#define AS_CAC_SPACE (AS_CAC_VAL << AS_SHIFT) + + +/* + * Virtual Mode Local & Global MMR space. + */ +#define SH1_LOCAL_MMR_OFFSET 0x8000000000UL +#define SH2_LOCAL_MMR_OFFSET 0x0200000000UL +#define LOCAL_MMR_OFFSET (is_shub2() ? SH2_LOCAL_MMR_OFFSET : SH1_LOCAL_MMR_OFFSET) +#define LOCAL_MMR_SPACE (__IA64_UNCACHED_OFFSET | LOCAL_MMR_OFFSET) +#define LOCAL_PHYS_MMR_SPACE (RGN_BASE(RGN_HPAGE) | LOCAL_MMR_OFFSET) + +#define SH1_GLOBAL_MMR_OFFSET 0x0800000000UL +#define SH2_GLOBAL_MMR_OFFSET 0x0300000000UL +#define GLOBAL_MMR_OFFSET (is_shub2() ? SH2_GLOBAL_MMR_OFFSET : SH1_GLOBAL_MMR_OFFSET) +#define GLOBAL_MMR_SPACE (__IA64_UNCACHED_OFFSET | GLOBAL_MMR_OFFSET) + +/* + * Physical mode addresses + */ +#define GLOBAL_PHYS_MMR_SPACE (RGN_BASE(RGN_HPAGE) | GLOBAL_MMR_OFFSET) + + +/* + * Clear region & AS bits. + */ +#define TO_PHYS_MASK (~(RGN_BITS | AS_MASK)) + + +/* + * Misc NASID manipulation. + */ +#define NASID_SPACE(n) ((u64)(n) << NASID_SHIFT) +#define REMOTE_ADDR(n,a) (NASID_SPACE(n) | (a)) +#define NODE_OFFSET(x) ((x) & (NODE_ADDRSPACE_SIZE - 1)) +#define NODE_ADDRSPACE_SIZE (1UL << AS_SHIFT) +#define NASID_GET(x) (int) (((u64) (x) >> NASID_SHIFT) & NASID_BITMASK) +#define LOCAL_MMR_ADDR(a) (LOCAL_MMR_SPACE | (a)) +#define GLOBAL_MMR_ADDR(n,a) (GLOBAL_MMR_SPACE | REMOTE_ADDR(n,a)) +#define GLOBAL_MMR_PHYS_ADDR(n,a) (GLOBAL_PHYS_MMR_SPACE | REMOTE_ADDR(n,a)) +#define GLOBAL_CAC_ADDR(n,a) (CAC_BASE | REMOTE_ADDR(n,a)) +#define CHANGE_NASID(n,x) ((void *)(((u64)(x) & ~NASID_MASK) | NASID_SPACE(n))) +#define IS_TIO_NASID(n) ((n) & 1) + + +/* non-II mmr's start at top of big window space (4G) */ +#define BWIN_TOP 0x0000000100000000UL + +/* + * general address defines + */ +#define CAC_BASE (PAGE_OFFSET | AS_CAC_SPACE) +#define AMO_BASE (__IA64_UNCACHED_OFFSET | AS_AMO_SPACE) +#define AMO_PHYS_BASE (RGN_BASE(RGN_HPAGE) | AS_AMO_SPACE) +#define GET_BASE (PAGE_OFFSET | AS_GET_SPACE) + +/* + * Convert Memory addresses between various addressing modes. + */ +#define TO_PHYS(x) (TO_PHYS_MASK & (x)) +#define TO_CAC(x) (CAC_BASE | TO_PHYS(x)) +#ifdef CONFIG_SGI_SN +#define TO_AMO(x) (AMO_BASE | TO_PHYS(x)) +#define TO_GET(x) (GET_BASE | TO_PHYS(x)) +#else +#define TO_AMO(x) ({ BUG(); x; }) +#define TO_GET(x) ({ BUG(); x; }) +#endif + +/* + * Covert from processor physical address to II/TIO physical address: + * II - squeeze out the AS bits + * TIO- requires a chiplet id in bits 38-39. For DMA to memory, + * the chiplet id is zero. If we implement TIO-TIO dma, we might need + * to insert a chiplet id into this macro. However, it is our belief + * right now that this chiplet id will be ICE, which is also zero. + */ +#define SH1_TIO_PHYS_TO_DMA(x) \ + ((((u64)(NASID_GET(x))) << 40) | NODE_OFFSET(x)) + +#define SH2_NETWORK_BANK_OFFSET(x) \ + ((u64)(x) & ((1UL << (sn_hub_info->nasid_shift - 4)) -1)) + +#define SH2_NETWORK_BANK_SELECT(x) \ + ((((u64)(x) & (0x3UL << (sn_hub_info->nasid_shift - 4))) \ + >> (sn_hub_info->nasid_shift - 4)) << 36) + +#define SH2_NETWORK_ADDRESS(x) \ + (SH2_NETWORK_BANK_OFFSET(x) | SH2_NETWORK_BANK_SELECT(x)) + +#define SH2_TIO_PHYS_TO_DMA(x) \ + (((u64)(NASID_GET(x)) << 40) | SH2_NETWORK_ADDRESS(x)) + +#define PHYS_TO_TIODMA(x) \ + (is_shub1() ? SH1_TIO_PHYS_TO_DMA(x) : SH2_TIO_PHYS_TO_DMA(x)) + +#define PHYS_TO_DMA(x) \ + ((((u64)(x) & NASID_MASK) >> 2) | NODE_OFFSET(x)) + + +/* + * Macros to test for address type. + */ +#define IS_AMO_ADDRESS(x) (((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_BASE) +#define IS_AMO_PHYS_ADDRESS(x) (((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_PHYS_BASE) + + +/* + * The following definitions pertain to the IO special address + * space. They define the location of the big and little windows + * of any given node. + */ +#define BWIN_SIZE_BITS 29 /* big window size: 512M */ +#define TIO_BWIN_SIZE_BITS 30 /* big window size: 1G */ +#define NODE_SWIN_BASE(n, w) ((w == 0) ? NODE_BWIN_BASE((n), SWIN0_BIGWIN) \ + : RAW_NODE_SWIN_BASE(n, w)) +#define TIO_SWIN_BASE(n, w) (TIO_IO_BASE(n) + \ + ((u64) (w) << TIO_SWIN_SIZE_BITS)) +#define NODE_IO_BASE(n) (GLOBAL_MMR_SPACE | NASID_SPACE(n)) +#define TIO_IO_BASE(n) (__IA64_UNCACHED_OFFSET | NASID_SPACE(n)) +#define BWIN_SIZE (1UL << BWIN_SIZE_BITS) +#define NODE_BWIN_BASE0(n) (NODE_IO_BASE(n) + BWIN_SIZE) +#define NODE_BWIN_BASE(n, w) (NODE_BWIN_BASE0(n) + ((u64) (w) << BWIN_SIZE_BITS)) +#define RAW_NODE_SWIN_BASE(n, w) (NODE_IO_BASE(n) + ((u64) (w) << SWIN_SIZE_BITS)) +#define BWIN_WIDGET_MASK 0x7 +#define BWIN_WINDOWNUM(x) (((x) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK) +#define SH1_IS_BIG_WINDOW_ADDR(x) ((x) & BWIN_TOP) + +#define TIO_BWIN_WINDOW_SELECT_MASK 0x7 +#define TIO_BWIN_WINDOWNUM(x) (((x) >> TIO_BWIN_SIZE_BITS) & TIO_BWIN_WINDOW_SELECT_MASK) + +#define TIO_HWIN_SHIFT_BITS 33 +#define TIO_HWIN(x) (NODE_OFFSET(x) >> TIO_HWIN_SHIFT_BITS) + +/* + * The following definitions pertain to the IO special address + * space. They define the location of the big and little windows + * of any given node. + */ + +#define SWIN_SIZE_BITS 24 +#define SWIN_WIDGET_MASK 0xF + +#define TIO_SWIN_SIZE_BITS 28 +#define TIO_SWIN_SIZE (1UL << TIO_SWIN_SIZE_BITS) +#define TIO_SWIN_WIDGET_MASK 0x3 + +/* + * Convert smallwindow address to xtalk address. + * + * 'addr' can be physical or virtual address, but will be converted + * to Xtalk address in the range 0 -> SWINZ_SIZEMASK + */ +#define SWIN_WIDGETNUM(x) (((x) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK) +#define TIO_SWIN_WIDGETNUM(x) (((x) >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK) + + +/* + * The following macros produce the correct base virtual address for + * the hub registers. The REMOTE_HUB_* macro produce + * the address for the specified hub's registers. The intent is + * that the appropriate PI, MD, NI, or II register would be substituted + * for x. + * + * WARNING: + * When certain Hub chip workaround are defined, it's not sufficient + * to dereference the *_HUB_ADDR() macros. You should instead use + * HUB_L() and HUB_S() if you must deal with pointers to hub registers. + * Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S(). + * They're always safe. + */ +/* Shub1 TIO & MMR addressing macros */ +#define SH1_TIO_IOSPACE_ADDR(n,x) \ + GLOBAL_MMR_ADDR(n,x) + +#define SH1_REMOTE_BWIN_MMR(n,x) \ + GLOBAL_MMR_ADDR(n,x) + +#define SH1_REMOTE_SWIN_MMR(n,x) \ + (NODE_SWIN_BASE(n,1) + 0x800000UL + (x)) + +#define SH1_REMOTE_MMR(n,x) \ + (SH1_IS_BIG_WINDOW_ADDR(x) ? SH1_REMOTE_BWIN_MMR(n,x) : \ + SH1_REMOTE_SWIN_MMR(n,x)) + +/* Shub1 TIO & MMR addressing macros */ +#define SH2_TIO_IOSPACE_ADDR(n,x) \ + ((__IA64_UNCACHED_OFFSET | REMOTE_ADDR(n,x) | 1UL << (NASID_SHIFT - 2))) + +#define SH2_REMOTE_MMR(n,x) \ + GLOBAL_MMR_ADDR(n,x) + + +/* TIO & MMR addressing macros that work on both shub1 & shub2 */ +#define TIO_IOSPACE_ADDR(n,x) \ + ((u64 *)(is_shub1() ? SH1_TIO_IOSPACE_ADDR(n,x) : \ + SH2_TIO_IOSPACE_ADDR(n,x))) + +#define SH_REMOTE_MMR(n,x) \ + (is_shub1() ? SH1_REMOTE_MMR(n,x) : SH2_REMOTE_MMR(n,x)) + +#define REMOTE_HUB_ADDR(n,x) \ + (IS_TIO_NASID(n) ? ((volatile u64*)TIO_IOSPACE_ADDR(n,x)) : \ + ((volatile u64*)SH_REMOTE_MMR(n,x))) + + +#define HUB_L(x) (*((volatile typeof(*x) *)x)) +#define HUB_S(x,d) (*((volatile typeof(*x) *)x) = (d)) + +#define REMOTE_HUB_L(n, a) HUB_L(REMOTE_HUB_ADDR((n), (a))) +#define REMOTE_HUB_S(n, a, d) HUB_S(REMOTE_HUB_ADDR((n), (a)), (d)) + +/* + * Coretalk address breakdown + */ +#define CTALK_NASID_SHFT 40 +#define CTALK_NASID_MASK (0x3FFFULL << CTALK_NASID_SHFT) +#define CTALK_CID_SHFT 38 +#define CTALK_CID_MASK (0x3ULL << CTALK_CID_SHFT) +#define CTALK_NODE_OFFSET 0x3FFFFFFFFF + +#endif /* _ASM_IA64_SN_ADDRS_H */ diff --git a/arch/ia64/include/asm/sn/arch.h b/arch/ia64/include/asm/sn/arch.h new file mode 100644 index 000000000000..7caa1f44cd95 --- /dev/null +++ b/arch/ia64/include/asm/sn/arch.h @@ -0,0 +1,86 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * SGI specific setup. + * + * Copyright (C) 1995-1997,1999,2001-2005 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_IA64_SN_ARCH_H +#define _ASM_IA64_SN_ARCH_H + +#include +#include +#include +#include +#include + +/* + * This is the maximum number of NUMALINK nodes that can be part of a single + * SSI kernel. This number includes C-brick, M-bricks, and TIOs. Nodes in + * remote partitions are NOT included in this number. + * The number of compact nodes cannot exceed size of a coherency domain. + * The purpose of this define is to specify a node count that includes + * all C/M/TIO nodes in an SSI system. + * + * SGI system can currently support up to 256 C/M nodes plus additional TIO nodes. + * + * Note: ACPI20 has an architectural limit of 256 nodes. When we upgrade + * to ACPI3.0, this limit will be removed. The notion of "compact nodes" + * should be deleted and TIOs should be included in MAX_NUMNODES. + */ +#define MAX_TIO_NODES MAX_NUMNODES +#define MAX_COMPACT_NODES (MAX_NUMNODES + MAX_TIO_NODES) + +/* + * Maximum number of nodes in all partitions and in all coherency domains. + * This is the total number of nodes accessible in the numalink fabric. It + * includes all C & M bricks, plus all TIOs. + * + * This value is also the value of the maximum number of NASIDs in the numalink + * fabric. + */ +#define MAX_NUMALINK_NODES 16384 + +/* + * The following defines attributes of the HUB chip. These attributes are + * frequently referenced. They are kept in the per-cpu data areas of each cpu. + * They are kept together in a struct to minimize cache misses. + */ +struct sn_hub_info_s { + u8 shub2; + u8 nasid_shift; + u8 as_shift; + u8 shub_1_1_found; + u16 nasid_bitmask; +}; +DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info); +#define sn_hub_info (&__get_cpu_var(__sn_hub_info)) +#define is_shub2() (sn_hub_info->shub2) +#define is_shub1() (sn_hub_info->shub2 == 0) + +/* + * Use this macro to test if shub 1.1 wars should be enabled + */ +#define enable_shub_wars_1_1() (sn_hub_info->shub_1_1_found) + + +/* + * Compact node ID to nasid mappings kept in the per-cpu data areas of each + * cpu. + */ +DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]); +#define sn_cnodeid_to_nasid (&__get_cpu_var(__sn_cnodeid_to_nasid[0])) + + +extern u8 sn_partition_id; +extern u8 sn_system_size; +extern u8 sn_sharing_domain_size; +extern u8 sn_region_size; + +extern void sn_flush_all_caches(long addr, long bytes); +extern bool sn_cpu_disable_allowed(int cpu); + +#endif /* _ASM_IA64_SN_ARCH_H */ diff --git a/arch/ia64/include/asm/sn/bte.h b/arch/ia64/include/asm/sn/bte.h new file mode 100644 index 000000000000..a0d214f43115 --- /dev/null +++ b/arch/ia64/include/asm/sn/bte.h @@ -0,0 +1,233 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. + */ + + +#ifndef _ASM_IA64_SN_BTE_H +#define _ASM_IA64_SN_BTE_H + +#include +#include +#include +#include +#include +#include + +#define IBCT_NOTIFY (0x1UL << 4) +#define IBCT_ZFIL_MODE (0x1UL << 0) + +/* #define BTE_DEBUG */ +/* #define BTE_DEBUG_VERBOSE */ + +#ifdef BTE_DEBUG +# define BTE_PRINTK(x) printk x /* Terse */ +# ifdef BTE_DEBUG_VERBOSE +# define BTE_PRINTKV(x) printk x /* Verbose */ +# else +# define BTE_PRINTKV(x) +# endif /* BTE_DEBUG_VERBOSE */ +#else +# define BTE_PRINTK(x) +# define BTE_PRINTKV(x) +#endif /* BTE_DEBUG */ + + +/* BTE status register only supports 16 bits for length field */ +#define BTE_LEN_BITS (16) +#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1) +#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES) + + +/* Define hardware */ +#define BTES_PER_NODE (is_shub2() ? 4 : 2) +#define MAX_BTES_PER_NODE 4 + +#define BTE2OFF_CTRL 0 +#define BTE2OFF_SRC (SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0) +#define BTE2OFF_DEST (SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0) +#define BTE2OFF_NOTIFY (SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0) + +#define BTE_BASE_ADDR(interface) \ + (is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 : \ + (interface == 1) ? SH2_BT_ENG_CSR_1 : \ + (interface == 2) ? SH2_BT_ENG_CSR_2 : \ + SH2_BT_ENG_CSR_3 \ + : (interface == 0) ? IIO_IBLS0 : IIO_IBLS1) + +#define BTE_SOURCE_ADDR(base) \ + (is_shub2() ? base + (BTE2OFF_SRC/8) \ + : base + (BTEOFF_SRC/8)) + +#define BTE_DEST_ADDR(base) \ + (is_shub2() ? base + (BTE2OFF_DEST/8) \ + : base + (BTEOFF_DEST/8)) + +#define BTE_CTRL_ADDR(base) \ + (is_shub2() ? base + (BTE2OFF_CTRL/8) \ + : base + (BTEOFF_CTRL/8)) + +#define BTE_NOTIF_ADDR(base) \ + (is_shub2() ? base + (BTE2OFF_NOTIFY/8) \ + : base + (BTEOFF_NOTIFY/8)) + +/* Define hardware modes */ +#define BTE_NOTIFY IBCT_NOTIFY +#define BTE_NORMAL BTE_NOTIFY +#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE) +/* Use a reserved bit to let the caller specify a wait for any BTE */ +#define BTE_WACQUIRE 0x4000 +/* Use the BTE on the node with the destination memory */ +#define BTE_USE_DEST (BTE_WACQUIRE << 1) +/* Use any available BTE interface on any node for the transfer */ +#define BTE_USE_ANY (BTE_USE_DEST << 1) +/* macro to force the IBCT0 value valid */ +#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE)) + +#define BTE_ACTIVE (IBLS_BUSY | IBLS_ERROR) +#define BTE_WORD_AVAILABLE (IBLS_BUSY << 1) +#define BTE_WORD_BUSY (~BTE_WORD_AVAILABLE) + +/* + * Some macros to simplify reading. + * Start with macros to locate the BTE control registers. + */ +#define BTE_LNSTAT_LOAD(_bte) \ + HUB_L(_bte->bte_base_addr) +#define BTE_LNSTAT_STORE(_bte, _x) \ + HUB_S(_bte->bte_base_addr, (_x)) +#define BTE_SRC_STORE(_bte, _x) \ +({ \ + u64 __addr = ((_x) & ~AS_MASK); \ + if (is_shub2()) \ + __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ + HUB_S(_bte->bte_source_addr, __addr); \ +}) +#define BTE_DEST_STORE(_bte, _x) \ +({ \ + u64 __addr = ((_x) & ~AS_MASK); \ + if (is_shub2()) \ + __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ + HUB_S(_bte->bte_destination_addr, __addr); \ +}) +#define BTE_CTRL_STORE(_bte, _x) \ + HUB_S(_bte->bte_control_addr, (_x)) +#define BTE_NOTIF_STORE(_bte, _x) \ +({ \ + u64 __addr = ia64_tpa((_x) & ~AS_MASK); \ + if (is_shub2()) \ + __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ + HUB_S(_bte->bte_notify_addr, __addr); \ +}) + +#define BTE_START_TRANSFER(_bte, _len, _mode) \ + is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \ + : BTE_LNSTAT_STORE(_bte, _len); \ + BTE_CTRL_STORE(_bte, _mode) + +/* Possible results from bte_copy and bte_unaligned_copy */ +/* The following error codes map into the BTE hardware codes + * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses + * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero + * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error + * codes to give the following error codes. + */ +#define BTEFAIL_OFFSET 1 + +typedef enum { + BTE_SUCCESS, /* 0 is success */ + BTEFAIL_DIR, /* Directory error due to IIO access*/ + BTEFAIL_POISON, /* poison error on IO access (write to poison page) */ + BTEFAIL_WERR, /* Write error (ie WINV to a Read only line) */ + BTEFAIL_ACCESS, /* access error (protection violation) */ + BTEFAIL_PWERR, /* Partial Write Error */ + BTEFAIL_PRERR, /* Partial Read Error */ + BTEFAIL_TOUT, /* CRB Time out */ + BTEFAIL_XTERR, /* Incoming xtalk pkt had error bit */ + BTEFAIL_NOTAVAIL, /* BTE not available */ +} bte_result_t; + +#define BTEFAIL_SH2_RESP_SHORT 0x1 /* bit 000001 */ +#define BTEFAIL_SH2_RESP_LONG 0x2 /* bit 000010 */ +#define BTEFAIL_SH2_RESP_DSP 0x4 /* bit 000100 */ +#define BTEFAIL_SH2_RESP_ACCESS 0x8 /* bit 001000 */ +#define BTEFAIL_SH2_CRB_TO 0x10 /* bit 010000 */ +#define BTEFAIL_SH2_NACK_LIMIT 0x20 /* bit 100000 */ +#define BTEFAIL_SH2_ALL 0x3F /* bit 111111 */ + +#define BTE_ERR_BITS 0x3FUL +#define BTE_ERR_SHIFT 36 +#define BTE_ERR_MASK (BTE_ERR_BITS << BTE_ERR_SHIFT) + +#define BTE_ERROR_RETRY(value) \ + (is_shub2() ? (value != BTEFAIL_SH2_CRB_TO) \ + : (value != BTEFAIL_TOUT)) + +/* + * On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2() + */ +#define BTE_SHUB2_ERROR(_status) \ + ((_status & BTE_ERR_MASK) \ + ? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \ + : _status) + +#define BTE_GET_ERROR_STATUS(_status) \ + (BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR) + +#define BTE_VALID_SH2_ERROR(value) \ + ((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL)) + +/* + * Structure defining a bte. An instance of this + * structure is created in the nodepda for each + * bte on that node (as defined by BTES_PER_NODE) + * This structure contains everything necessary + * to work with a BTE. + */ +struct bteinfo_s { + volatile u64 notify ____cacheline_aligned; + u64 *bte_base_addr ____cacheline_aligned; + u64 *bte_source_addr; + u64 *bte_destination_addr; + u64 *bte_control_addr; + u64 *bte_notify_addr; + spinlock_t spinlock; + cnodeid_t bte_cnode; /* cnode */ + int bte_error_count; /* Number of errors encountered */ + int bte_num; /* 0 --> BTE0, 1 --> BTE1 */ + int cleanup_active; /* Interface is locked for cleanup */ + volatile bte_result_t bh_error; /* error while processing */ + volatile u64 *most_rcnt_na; + struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE]; +}; + + +/* + * Function prototypes (functions defined in bte.c, used elsewhere) + */ +extern bte_result_t bte_copy(u64, u64, u64, u64, void *); +extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64); +extern void bte_error_handler(unsigned long); + +#define bte_zero(dest, len, mode, notification) \ + bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification) + +/* + * The following is the prefered way of calling bte_unaligned_copy + * If the copy is fully cache line aligned, then bte_copy is + * used instead. Since bte_copy is inlined, this saves a call + * stack. NOTE: bte_copy is called synchronously and does block + * until the transfer is complete. In order to get the asynch + * version of bte_copy, you must perform this check yourself. + */ +#define BTE_UNALIGNED_COPY(src, dest, len, mode) \ + (((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) || \ + (dest & L1_CACHE_MASK)) ? \ + bte_unaligned_copy(src, dest, len, mode) : \ + bte_copy(src, dest, len, mode, NULL)) + + +#endif /* _ASM_IA64_SN_BTE_H */ diff --git a/arch/ia64/include/asm/sn/clksupport.h b/arch/ia64/include/asm/sn/clksupport.h new file mode 100644 index 000000000000..d340c365a824 --- /dev/null +++ b/arch/ia64/include/asm/sn/clksupport.h @@ -0,0 +1,28 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. + */ + +/* + * This file contains definitions for accessing a platform supported high resolution + * clock. The clock is monitonically increasing and can be accessed from any node + * in the system. The clock is synchronized across nodes - all nodes see the + * same value. + * + * RTC_COUNTER_ADDR - contains the address of the counter + * + */ + +#ifndef _ASM_IA64_SN_CLKSUPPORT_H +#define _ASM_IA64_SN_CLKSUPPORT_H + +extern unsigned long sn_rtc_cycles_per_second; + +#define RTC_COUNTER_ADDR ((long *)LOCAL_MMR_ADDR(SH_RTC)) + +#define rtc_time() (*RTC_COUNTER_ADDR) + +#endif /* _ASM_IA64_SN_CLKSUPPORT_H */ diff --git a/arch/ia64/include/asm/sn/geo.h b/arch/ia64/include/asm/sn/geo.h new file mode 100644 index 000000000000..f083c9434066 --- /dev/null +++ b/arch/ia64/include/asm/sn/geo.h @@ -0,0 +1,132 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_GEO_H +#define _ASM_IA64_SN_GEO_H + +/* The geoid_t implementation below is based loosely on the pcfg_t + implementation in sys/SN/promcfg.h. */ + +/* Type declaractions */ + +/* Size of a geoid_t structure (must be before decl. of geoid_u) */ +#define GEOID_SIZE 8 /* Would 16 be better? The size can + be different on different platforms. */ + +#define MAX_SLOTS 0xf /* slots per module */ +#define MAX_SLABS 0xf /* slabs per slot */ + +typedef unsigned char geo_type_t; + +/* Fields common to all substructures */ +typedef struct geo_common_s { + moduleid_t module; /* The module (box) this h/w lives in */ + geo_type_t type; /* What type of h/w is named by this geoid_t */ + slabid_t slab:4; /* slab (ASIC), 0 .. 15 within slot */ + slotid_t slot:4; /* slot (Blade), 0 .. 15 within module */ +} geo_common_t; + +/* Additional fields for particular types of hardware */ +typedef struct geo_node_s { + geo_common_t common; /* No additional fields needed */ +} geo_node_t; + +typedef struct geo_rtr_s { + geo_common_t common; /* No additional fields needed */ +} geo_rtr_t; + +typedef struct geo_iocntl_s { + geo_common_t common; /* No additional fields needed */ +} geo_iocntl_t; + +typedef struct geo_pcicard_s { + geo_iocntl_t common; + char bus; /* Bus/widget number */ + char slot; /* PCI slot number */ +} geo_pcicard_t; + +/* Subcomponents of a node */ +typedef struct geo_cpu_s { + geo_node_t node; + char slice; /* Which CPU on the node */ +} geo_cpu_t; + +typedef struct geo_mem_s { + geo_node_t node; + char membus; /* The memory bus on the node */ + char memslot; /* The memory slot on the bus */ +} geo_mem_t; + + +typedef union geoid_u { + geo_common_t common; + geo_node_t node; + geo_iocntl_t iocntl; + geo_pcicard_t pcicard; + geo_rtr_t rtr; + geo_cpu_t cpu; + geo_mem_t mem; + char padsize[GEOID_SIZE]; +} geoid_t; + + +/* Preprocessor macros */ + +#define GEO_MAX_LEN 48 /* max. formatted length, plus some pad: + module/001c07/slab/5/node/memory/2/slot/4 */ + +/* Values for geo_type_t */ +#define GEO_TYPE_INVALID 0 +#define GEO_TYPE_MODULE 1 +#define GEO_TYPE_NODE 2 +#define GEO_TYPE_RTR 3 +#define GEO_TYPE_IOCNTL 4 +#define GEO_TYPE_IOCARD 5 +#define GEO_TYPE_CPU 6 +#define GEO_TYPE_MEM 7 +#define GEO_TYPE_MAX (GEO_TYPE_MEM+1) + +/* Parameter for hwcfg_format_geoid_compt() */ +#define GEO_COMPT_MODULE 1 +#define GEO_COMPT_SLAB 2 +#define GEO_COMPT_IOBUS 3 +#define GEO_COMPT_IOSLOT 4 +#define GEO_COMPT_CPU 5 +#define GEO_COMPT_MEMBUS 6 +#define GEO_COMPT_MEMSLOT 7 + +#define GEO_INVALID_STR "" + +#define INVALID_NASID ((nasid_t)-1) +#define INVALID_CNODEID ((cnodeid_t)-1) +#define INVALID_PNODEID ((pnodeid_t)-1) +#define INVALID_SLAB (slabid_t)-1 +#define INVALID_SLOT (slotid_t)-1 +#define INVALID_MODULE ((moduleid_t)-1) + +static inline slabid_t geo_slab(geoid_t g) +{ + return (g.common.type == GEO_TYPE_INVALID) ? + INVALID_SLAB : g.common.slab; +} + +static inline slotid_t geo_slot(geoid_t g) +{ + return (g.common.type == GEO_TYPE_INVALID) ? + INVALID_SLOT : g.common.slot; +} + +static inline moduleid_t geo_module(geoid_t g) +{ + return (g.common.type == GEO_TYPE_INVALID) ? + INVALID_MODULE : g.common.module; +} + +extern geoid_t cnodeid_get_geoid(cnodeid_t cnode); + +#endif /* _ASM_IA64_SN_GEO_H */ diff --git a/arch/ia64/include/asm/sn/intr.h b/arch/ia64/include/asm/sn/intr.h new file mode 100644 index 000000000000..e0487aa97418 --- /dev/null +++ b/arch/ia64/include/asm/sn/intr.h @@ -0,0 +1,68 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_INTR_H +#define _ASM_IA64_SN_INTR_H + +#include +#include + +#define SGI_UART_VECTOR 0xe9 + +/* Reserved IRQs : Note, not to exceed IA64_SN2_FIRST_DEVICE_VECTOR */ +#define SGI_XPC_ACTIVATE 0x30 +#define SGI_II_ERROR 0x31 +#define SGI_XBOW_ERROR 0x32 +#define SGI_PCIASIC_ERROR 0x33 +#define SGI_ACPI_SCI_INT 0x34 +#define SGI_TIOCA_ERROR 0x35 +#define SGI_TIO_ERROR 0x36 +#define SGI_TIOCX_ERROR 0x37 +#define SGI_MMTIMER_VECTOR 0x38 +#define SGI_XPC_NOTIFY 0xe7 + +#define IA64_SN2_FIRST_DEVICE_VECTOR 0x3c +#define IA64_SN2_LAST_DEVICE_VECTOR 0xe6 + +#define SN2_IRQ_RESERVED 0x1 +#define SN2_IRQ_CONNECTED 0x2 +#define SN2_IRQ_SHARED 0x4 + +// The SN PROM irq struct +struct sn_irq_info { + struct sn_irq_info *irq_next; /* deprecated DO NOT USE */ + short irq_nasid; /* Nasid IRQ is assigned to */ + int irq_slice; /* slice IRQ is assigned to */ + int irq_cpuid; /* kernel logical cpuid */ + int irq_irq; /* the IRQ number */ + int irq_int_bit; /* Bridge interrupt pin */ + /* <0 means MSI */ + u64 irq_xtalkaddr; /* xtalkaddr IRQ is sent to */ + int irq_bridge_type;/* pciio asic type (pciio.h) */ + void *irq_bridge; /* bridge generating irq */ + void *irq_pciioinfo; /* associated pciio_info_t */ + int irq_last_intr; /* For Shub lb lost intr WAR */ + int irq_cookie; /* unique cookie */ + int irq_flags; /* flags */ + int irq_share_cnt; /* num devices sharing IRQ */ + struct list_head list; /* list of sn_irq_info structs */ + struct rcu_head rcu; /* rcu callback list */ +}; + +extern void sn_send_IPI_phys(int, long, int, int); +extern u64 sn_intr_alloc(nasid_t, int, + struct sn_irq_info *, + int, nasid_t, int); +extern void sn_intr_free(nasid_t, int, struct sn_irq_info *); +extern struct sn_irq_info *sn_retarget_vector(struct sn_irq_info *, nasid_t, int); +extern void sn_set_err_irq_affinity(unsigned int); +extern struct list_head **sn_irq_lh; + +#define CPU_VECTOR_TO_IRQ(cpuid,vector) (vector) + +#endif /* _ASM_IA64_SN_INTR_H */ diff --git a/arch/ia64/include/asm/sn/io.h b/arch/ia64/include/asm/sn/io.h new file mode 100644 index 000000000000..41c73a735628 --- /dev/null +++ b/arch/ia64/include/asm/sn/io.h @@ -0,0 +1,274 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_SN_IO_H +#define _ASM_SN_IO_H +#include +#include + +extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */ +extern void __sn_mmiowb(void); /* Forward definition */ + +extern int num_cnodes; + +#define __sn_mf_a() ia64_mfa() + +extern void sn_dma_flush(unsigned long); + +#define __sn_inb ___sn_inb +#define __sn_inw ___sn_inw +#define __sn_inl ___sn_inl +#define __sn_outb ___sn_outb +#define __sn_outw ___sn_outw +#define __sn_outl ___sn_outl +#define __sn_readb ___sn_readb +#define __sn_readw ___sn_readw +#define __sn_readl ___sn_readl +#define __sn_readq ___sn_readq +#define __sn_readb_relaxed ___sn_readb_relaxed +#define __sn_readw_relaxed ___sn_readw_relaxed +#define __sn_readl_relaxed ___sn_readl_relaxed +#define __sn_readq_relaxed ___sn_readq_relaxed + +/* + * Convenience macros for setting/clearing bits using the above accessors + */ + +#define __sn_setq_relaxed(addr, val) \ + writeq((__sn_readq_relaxed(addr) | (val)), (addr)) +#define __sn_clrq_relaxed(addr, val) \ + writeq((__sn_readq_relaxed(addr) & ~(val)), (addr)) + +/* + * The following routines are SN Platform specific, called when + * a reference is made to inX/outX set macros. SN Platform + * inX set of macros ensures that Posted DMA writes on the + * Bridge is flushed. + * + * The routines should be self explainatory. + */ + +static inline unsigned int +___sn_inb (unsigned long port) +{ + volatile unsigned char *addr; + unsigned char ret = -1; + + if ((addr = sn_io_addr(port))) { + ret = *addr; + __sn_mf_a(); + sn_dma_flush((unsigned long)addr); + } + return ret; +} + +static inline unsigned int +___sn_inw (unsigned long port) +{ + volatile unsigned short *addr; + unsigned short ret = -1; + + if ((addr = sn_io_addr(port))) { + ret = *addr; + __sn_mf_a(); + sn_dma_flush((unsigned long)addr); + } + return ret; +} + +static inline unsigned int +___sn_inl (unsigned long port) +{ + volatile unsigned int *addr; + unsigned int ret = -1; + + if ((addr = sn_io_addr(port))) { + ret = *addr; + __sn_mf_a(); + sn_dma_flush((unsigned long)addr); + } + return ret; +} + +static inline void +___sn_outb (unsigned char val, unsigned long port) +{ + volatile unsigned char *addr; + + if ((addr = sn_io_addr(port))) { + *addr = val; + __sn_mmiowb(); + } +} + +static inline void +___sn_outw (unsigned short val, unsigned long port) +{ + volatile unsigned short *addr; + + if ((addr = sn_io_addr(port))) { + *addr = val; + __sn_mmiowb(); + } +} + +static inline void +___sn_outl (unsigned int val, unsigned long port) +{ + volatile unsigned int *addr; + + if ((addr = sn_io_addr(port))) { + *addr = val; + __sn_mmiowb(); + } +} + +/* + * The following routines are SN Platform specific, called when + * a reference is made to readX/writeX set macros. SN Platform + * readX set of macros ensures that Posted DMA writes on the + * Bridge is flushed. + * + * The routines should be self explainatory. + */ + +static inline unsigned char +___sn_readb (const volatile void __iomem *addr) +{ + unsigned char val; + + val = *(volatile unsigned char __force *)addr; + __sn_mf_a(); + sn_dma_flush((unsigned long)addr); + return val; +} + +static inline unsigned short +___sn_readw (const volatile void __iomem *addr) +{ + unsigned short val; + + val = *(volatile unsigned short __force *)addr; + __sn_mf_a(); + sn_dma_flush((unsigned long)addr); + return val; +} + +static inline unsigned int +___sn_readl (const volatile void __iomem *addr) +{ + unsigned int val; + + val = *(volatile unsigned int __force *)addr; + __sn_mf_a(); + sn_dma_flush((unsigned long)addr); + return val; +} + +static inline unsigned long +___sn_readq (const volatile void __iomem *addr) +{ + unsigned long val; + + val = *(volatile unsigned long __force *)addr; + __sn_mf_a(); + sn_dma_flush((unsigned long)addr); + return val; +} + +/* + * For generic and SN2 kernels, we have a set of fast access + * PIO macros. These macros are provided on SN Platform + * because the normal inX and readX macros perform an + * additional task of flushing Post DMA request on the Bridge. + * + * These routines should be self explainatory. + */ + +static inline unsigned int +sn_inb_fast (unsigned long port) +{ + volatile unsigned char *addr = (unsigned char *)port; + unsigned char ret; + + ret = *addr; + __sn_mf_a(); + return ret; +} + +static inline unsigned int +sn_inw_fast (unsigned long port) +{ + volatile unsigned short *addr = (unsigned short *)port; + unsigned short ret; + + ret = *addr; + __sn_mf_a(); + return ret; +} + +static inline unsigned int +sn_inl_fast (unsigned long port) +{ + volatile unsigned int *addr = (unsigned int *)port; + unsigned int ret; + + ret = *addr; + __sn_mf_a(); + return ret; +} + +static inline unsigned char +___sn_readb_relaxed (const volatile void __iomem *addr) +{ + return *(volatile unsigned char __force *)addr; +} + +static inline unsigned short +___sn_readw_relaxed (const volatile void __iomem *addr) +{ + return *(volatile unsigned short __force *)addr; +} + +static inline unsigned int +___sn_readl_relaxed (const volatile void __iomem *addr) +{ + return *(volatile unsigned int __force *) addr; +} + +static inline unsigned long +___sn_readq_relaxed (const volatile void __iomem *addr) +{ + return *(volatile unsigned long __force *) addr; +} + +struct pci_dev; + +static inline int +sn_pci_set_vchan(struct pci_dev *pci_dev, unsigned long *addr, int vchan) +{ + + if (vchan > 1) { + return -1; + } + + if (!(*addr >> 32)) /* Using a mask here would be cleaner */ + return 0; /* but this generates better code */ + + if (vchan == 1) { + /* Set Bit 57 */ + *addr |= (1UL << 57); + } else { + /* Clear Bit 57 */ + *addr &= ~(1UL << 57); + } + + return 0; +} + +#endif /* _ASM_SN_IO_H */ diff --git a/arch/ia64/include/asm/sn/ioc3.h b/arch/ia64/include/asm/sn/ioc3.h new file mode 100644 index 000000000000..95ed6cc83cf1 --- /dev/null +++ b/arch/ia64/include/asm/sn/ioc3.h @@ -0,0 +1,241 @@ +/* + * Copyright (C) 2005 Silicon Graphics, Inc. + */ +#ifndef IA64_SN_IOC3_H +#define IA64_SN_IOC3_H + +/* serial port register map */ +struct ioc3_serialregs { + uint32_t sscr; + uint32_t stpir; + uint32_t stcir; + uint32_t srpir; + uint32_t srcir; + uint32_t srtr; + uint32_t shadow; +}; + +/* SUPERIO uart register map */ +struct ioc3_uartregs { + char iu_lcr; + union { + char iir; /* read only */ + char fcr; /* write only */ + } u3; + union { + char ier; /* DLAB == 0 */ + char dlm; /* DLAB == 1 */ + } u2; + union { + char rbr; /* read only, DLAB == 0 */ + char thr; /* write only, DLAB == 0 */ + char dll; /* DLAB == 1 */ + } u1; + char iu_scr; + char iu_msr; + char iu_lsr; + char iu_mcr; +}; + +#define iu_rbr u1.rbr +#define iu_thr u1.thr +#define iu_dll u1.dll +#define iu_ier u2.ier +#define iu_dlm u2.dlm +#define iu_iir u3.iir +#define iu_fcr u3.fcr + +struct ioc3_sioregs { + char fill[0x170]; + struct ioc3_uartregs uartb; + struct ioc3_uartregs uarta; +}; + +/* PCI IO/mem space register map */ +struct ioc3 { + uint32_t pci_id; + uint32_t pci_scr; + uint32_t pci_rev; + uint32_t pci_lat; + uint32_t pci_addr; + uint32_t pci_err_addr_l; + uint32_t pci_err_addr_h; + + uint32_t sio_ir; + /* these registers are read-only for general kernel code. To + * modify them use the functions in ioc3.c + */ + uint32_t sio_ies; + uint32_t sio_iec; + uint32_t sio_cr; + uint32_t int_out; + uint32_t mcr; + uint32_t gpcr_s; + uint32_t gpcr_c; + uint32_t gpdr; + uint32_t gppr[9]; + char fill[0x4c]; + + /* serial port registers */ + uint32_t sbbr_h; + uint32_t sbbr_l; + + struct ioc3_serialregs port_a; + struct ioc3_serialregs port_b; + char fill1[0x1ff10]; + /* superio registers */ + struct ioc3_sioregs sregs; +}; + +/* These don't exist on the ioc3 serial card... */ +#define eier fill1[8] +#define eisr fill1[4] + +#define PCI_LAT 0xc /* Latency Timer */ +#define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */ +#define UARTA_BASE 0x178 +#define UARTB_BASE 0x170 + + +/* bitmasks for serial RX status byte */ +#define RXSB_OVERRUN 0x01 /* char(s) lost */ +#define RXSB_PAR_ERR 0x02 /* parity error */ +#define RXSB_FRAME_ERR 0x04 /* framing error */ +#define RXSB_BREAK 0x08 /* break character */ +#define RXSB_CTS 0x10 /* state of CTS */ +#define RXSB_DCD 0x20 /* state of DCD */ +#define RXSB_MODEM_VALID 0x40 /* DCD, CTS and OVERRUN are valid */ +#define RXSB_DATA_VALID 0x80 /* FRAME_ERR PAR_ERR & BREAK valid */ + +/* bitmasks for serial TX control byte */ +#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */ +#define TXCB_INVALID 0x00 /* byte is invalid */ +#define TXCB_VALID 0x40 /* byte is valid */ +#define TXCB_MCR 0x80 /* data<7:0> to modem cntrl register */ +#define TXCB_DELAY 0xc0 /* delay data<7:0> mSec */ + +/* bitmasks for SBBR_L */ +#define SBBR_L_SIZE 0x00000001 /* 0 1KB rings, 1 4KB rings */ + +/* bitmasks for SSCR_ */ +#define SSCR_RX_THRESHOLD 0x000001ff /* hiwater mark */ +#define SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ +#define SSCR_HFC_EN 0x00020000 /* h/w flow cntrl enabled */ +#define SSCR_RX_RING_DCD 0x00040000 /* postRX record on delta-DCD */ +#define SSCR_RX_RING_CTS 0x00080000 /* postRX record on delta-CTS */ +#define SSCR_HIGH_SPD 0x00100000 /* 4X speed */ +#define SSCR_DIAG 0x00200000 /* bypass clock divider */ +#define SSCR_RX_DRAIN 0x08000000 /* drain RX buffer to memory */ +#define SSCR_DMA_EN 0x10000000 /* enable ring buffer DMA */ +#define SSCR_DMA_PAUSE 0x20000000 /* pause DMA */ +#define SSCR_PAUSE_STATE 0x40000000 /* set when PAUSE takes effect*/ +#define SSCR_RESET 0x80000000 /* reset DMA channels */ + +/* all producer/comsumer pointers are the same bitfield */ +#define PROD_CONS_PTR_4K 0x00000ff8 /* for 4K buffers */ +#define PROD_CONS_PTR_1K 0x000003f8 /* for 1K buffers */ +#define PROD_CONS_PTR_OFF 3 + +/* bitmasks for SRCIR_ */ +#define SRCIR_ARM 0x80000000 /* arm RX timer */ + +/* bitmasks for SHADOW_ */ +#define SHADOW_DR 0x00000001 /* data ready */ +#define SHADOW_OE 0x00000002 /* overrun error */ +#define SHADOW_PE 0x00000004 /* parity error */ +#define SHADOW_FE 0x00000008 /* framing error */ +#define SHADOW_BI 0x00000010 /* break interrupt */ +#define SHADOW_THRE 0x00000020 /* transmit holding reg empty */ +#define SHADOW_TEMT 0x00000040 /* transmit shift reg empty */ +#define SHADOW_RFCE 0x00000080 /* char in RX fifo has error */ +#define SHADOW_DCTS 0x00010000 /* delta clear to send */ +#define SHADOW_DDCD 0x00080000 /* delta data carrier detect */ +#define SHADOW_CTS 0x00100000 /* clear to send */ +#define SHADOW_DCD 0x00800000 /* data carrier detect */ +#define SHADOW_DTR 0x01000000 /* data terminal ready */ +#define SHADOW_RTS 0x02000000 /* request to send */ +#define SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ +#define SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ +#define SHADOW_LOOP 0x10000000 /* loopback enabled */ + +/* bitmasks for SRTR_ */ +#define SRTR_CNT 0x00000fff /* reload value for RX timer */ +#define SRTR_CNT_VAL 0x0fff0000 /* current value of RX timer */ +#define SRTR_CNT_VAL_SHIFT 16 +#define SRTR_HZ 16000 /* SRTR clock frequency */ + +/* bitmasks for SIO_IR, SIO_IEC and SIO_IES */ +#define SIO_IR_SA_TX_MT 0x00000001 /* Serial port A TX empty */ +#define SIO_IR_SA_RX_FULL 0x00000002 /* port A RX buf full */ +#define SIO_IR_SA_RX_HIGH 0x00000004 /* port A RX hiwat */ +#define SIO_IR_SA_RX_TIMER 0x00000008 /* port A RX timeout */ +#define SIO_IR_SA_DELTA_DCD 0x00000010 /* port A delta DCD */ +#define SIO_IR_SA_DELTA_CTS 0x00000020 /* port A delta CTS */ +#define SIO_IR_SA_INT 0x00000040 /* port A pass-thru intr */ +#define SIO_IR_SA_TX_EXPLICIT 0x00000080 /* port A explicit TX thru */ +#define SIO_IR_SA_MEMERR 0x00000100 /* port A PCI error */ +#define SIO_IR_SB_TX_MT 0x00000200 +#define SIO_IR_SB_RX_FULL 0x00000400 +#define SIO_IR_SB_RX_HIGH 0x00000800 +#define SIO_IR_SB_RX_TIMER 0x00001000 +#define SIO_IR_SB_DELTA_DCD 0x00002000 +#define SIO_IR_SB_DELTA_CTS 0x00004000 +#define SIO_IR_SB_INT 0x00008000 +#define SIO_IR_SB_TX_EXPLICIT 0x00010000 +#define SIO_IR_SB_MEMERR 0x00020000 +#define SIO_IR_PP_INT 0x00040000 /* P port pass-thru intr */ +#define SIO_IR_PP_INTA 0x00080000 /* PP context A thru */ +#define SIO_IR_PP_INTB 0x00100000 /* PP context B thru */ +#define SIO_IR_PP_MEMERR 0x00200000 /* PP PCI error */ +#define SIO_IR_KBD_INT 0x00400000 /* kbd/mouse intr */ +#define SIO_IR_RT_INT 0x08000000 /* RT output pulse */ +#define SIO_IR_GEN_INT1 0x10000000 /* RT input pulse */ +#define SIO_IR_GEN_INT_SHIFT 28 + +/* per device interrupt masks */ +#define SIO_IR_SA (SIO_IR_SA_TX_MT | \ + SIO_IR_SA_RX_FULL | \ + SIO_IR_SA_RX_HIGH | \ + SIO_IR_SA_RX_TIMER | \ + SIO_IR_SA_DELTA_DCD | \ + SIO_IR_SA_DELTA_CTS | \ + SIO_IR_SA_INT | \ + SIO_IR_SA_TX_EXPLICIT | \ + SIO_IR_SA_MEMERR) + +#define SIO_IR_SB (SIO_IR_SB_TX_MT | \ + SIO_IR_SB_RX_FULL | \ + SIO_IR_SB_RX_HIGH | \ + SIO_IR_SB_RX_TIMER | \ + SIO_IR_SB_DELTA_DCD | \ + SIO_IR_SB_DELTA_CTS | \ + SIO_IR_SB_INT | \ + SIO_IR_SB_TX_EXPLICIT | \ + SIO_IR_SB_MEMERR) + +#define SIO_IR_PP (SIO_IR_PP_INT | SIO_IR_PP_INTA | \ + SIO_IR_PP_INTB | SIO_IR_PP_MEMERR) +#define SIO_IR_RT (SIO_IR_RT_INT | SIO_IR_GEN_INT1) + +/* bitmasks for SIO_CR */ +#define SIO_CR_CMD_PULSE_SHIFT 15 +#define SIO_CR_SER_A_BASE_SHIFT 1 +#define SIO_CR_SER_B_BASE_SHIFT 8 +#define SIO_CR_ARB_DIAG 0x00380000 /* cur !enet PCI requet (ro) */ +#define SIO_CR_ARB_DIAG_TXA 0x00000000 +#define SIO_CR_ARB_DIAG_RXA 0x00080000 +#define SIO_CR_ARB_DIAG_TXB 0x00100000 +#define SIO_CR_ARB_DIAG_RXB 0x00180000 +#define SIO_CR_ARB_DIAG_PP 0x00200000 +#define SIO_CR_ARB_DIAG_IDLE 0x00400000 /* 0 -> active request (ro) */ + +/* defs for some of the generic I/O pins */ +#define GPCR_PHY_RESET 0x20 /* pin is output to PHY reset */ +#define GPCR_UARTB_MODESEL 0x40 /* pin is output to port B mode sel */ +#define GPCR_UARTA_MODESEL 0x80 /* pin is output to port A mode sel */ + +#define GPPR_PHY_RESET_PIN 5 /* GIO pin controlling phy reset */ +#define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin cntrling uartb modeselect */ +#define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin cntrling uarta modeselect */ + +#endif /* IA64_SN_IOC3_H */ diff --git a/arch/ia64/include/asm/sn/klconfig.h b/arch/ia64/include/asm/sn/klconfig.h new file mode 100644 index 000000000000..bcbf209d63be --- /dev/null +++ b/arch/ia64/include/asm/sn/klconfig.h @@ -0,0 +1,246 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX . + * + * Copyright (C) 1992-1997,1999,2001-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_IA64_SN_KLCONFIG_H +#define _ASM_IA64_SN_KLCONFIG_H + +/* + * The KLCONFIG structures store info about the various BOARDs found + * during Hardware Discovery. In addition, it stores info about the + * components found on the BOARDs. + */ + +typedef s32 klconf_off_t; + + +/* Functions/macros needed to use this structure */ + +typedef struct kl_config_hdr { + char pad[20]; + klconf_off_t ch_board_info; /* the link list of boards */ + char pad0[88]; +} kl_config_hdr_t; + + +#define NODE_OFFSET_TO_LBOARD(nasid,off) (lboard_t*)(GLOBAL_CAC_ADDR((nasid), (off))) + +/* + * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD + * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to + * the LOCAL/current NODE. REMOTE means it is attached to a different + * node.(TBD - Need a way to treat ROUTER boards.) + * + * There are 2 different structures to represent these boards - + * lboard - Local board, rboard - remote board. These 2 structures + * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer + * Figure below). The first byte of the rboard or lboard structure + * is used to find out its type - no unions are used. + * If it is a lboard, then the config info of this board will be found + * on the local node. (LOCAL NODE BASE + offset value gives pointer to + * the structure. + * If it is a rboard, the local structure contains the node number + * and the offset of the beginning of the LINKED LIST on the remote node. + * The details of the hardware on a remote node can be built locally, + * if required, by reading the LINKED LIST on the remote node and + * ignoring all the rboards on that node. + * + * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the + * First board info on the remote node. The remote node list is + * traversed as the local list, using the REMOTE BASE ADDRESS and not + * the local base address and ignoring all rboard values. + * + * + KLCONFIG + + +------------+ +------------+ +------------+ +------------+ + | lboard | +-->| lboard | +-->| rboard | +-->| lboard | + +------------+ | +------------+ | +------------+ | +------------+ + | board info | | | board info | | |errinfo,bptr| | | board info | + +------------+ | +------------+ | +------------+ | +------------+ + | offset |--+ | offset |--+ | offset |--+ |offset=NULL | + +------------+ +------------+ +------------+ +------------+ + + + +------------+ + | board info | + +------------+ +--------------------------------+ + | compt 1 |------>| type, rev, diaginfo, size ... | (CPU) + +------------+ +--------------------------------+ + | compt 2 |--+ + +------------+ | +--------------------------------+ + | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) + +------------+ +--------------------------------+ + | errinfo |--+ + +------------+ | +--------------------------------+ + +--->|r/l brd errinfo,compt err flags | + +--------------------------------+ + + * + * Each BOARD consists of COMPONENTs and the BOARD structure has + * pointers (offsets) to its COMPONENT structure. + * The COMPONENT structure has version info, size and speed info, revision, + * error info and the NIC info. This structure can accommodate any + * BOARD with arbitrary COMPONENT composition. + * + * The ERRORINFO part of each BOARD has error information + * that describes errors about the BOARD itself. It also has flags to + * indicate the COMPONENT(s) on the board that have errors. The error + * information specific to the COMPONENT is present in the respective + * COMPONENT structure. + * + * The ERRORINFO structure is also treated like a COMPONENT, ie. the + * BOARD has pointers(offset) to the ERRORINFO structure. The rboard + * structure also has a pointer to the ERRORINFO structure. This is + * the place to store ERRORINFO about a REMOTE NODE, if the HUB on + * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where + * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can + * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info + * which is present on the REMOTE NODE.(TBD) + * REMOTE ERRINFO can be stored on any of the nearest nodes + * or on all the nearest nodes.(TBD) + * Like BOARD structures, REMOTE ERRINFO structures can be built locally + * using the rboard errinfo pointer. + * + * In order to get useful information from this Data organization, a set of + * interface routines are provided (TBD). The important thing to remember while + * manipulating the structures, is that, the NODE number information should + * be used. If the NODE is non-zero (remote) then each offset should + * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. + * This includes offsets for BOARDS, COMPONENTS and ERRORINFO. + * + * Note that these structures do not provide much info about connectivity. + * That info will be part of HWGRAPH, which is an extension of the cfg_t + * data structure. (ref IP27prom/cfg.h) It has to be extended to include + * the IO part of the Network(TBD). + * + * The data structures below define the above concepts. + */ + + +/* + * BOARD classes + */ + +#define KLCLASS_MASK 0xf0 +#define KLCLASS_NONE 0x00 +#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ +#define KLCLASS_CPU KLCLASS_NODE +#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI + and the non-graphics widget boards */ +#define KLCLASS_ROUTER 0x30 /* Router board */ +#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board + so that we can record error info */ +#define KLCLASS_IOBRICK 0x70 /* IP35 iobrick */ +#define KLCLASS_MAX 8 /* Bump this if a new CLASS is added */ + +#define KLCLASS(_x) ((_x) & KLCLASS_MASK) + + +/* + * board types + */ + +#define KLTYPE_MASK 0x0f +#define KLTYPE(_x) ((_x) & KLTYPE_MASK) + +#define KLTYPE_SNIA (KLCLASS_CPU | 0x1) +#define KLTYPE_TIO (KLCLASS_CPU | 0x2) + +#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) +#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3) +#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4) + +#define KLTYPE_IOBRICK_XBOW (KLCLASS_MIDPLANE | 0x2) + +#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0) +#define KLTYPE_NBRICK (KLCLASS_IOBRICK | 0x4) +#define KLTYPE_PXBRICK (KLCLASS_IOBRICK | 0x6) +#define KLTYPE_IXBRICK (KLCLASS_IOBRICK | 0x7) +#define KLTYPE_CGBRICK (KLCLASS_IOBRICK | 0x8) +#define KLTYPE_OPUSBRICK (KLCLASS_IOBRICK | 0x9) +#define KLTYPE_SABRICK (KLCLASS_IOBRICK | 0xa) +#define KLTYPE_IABRICK (KLCLASS_IOBRICK | 0xb) +#define KLTYPE_PABRICK (KLCLASS_IOBRICK | 0xc) +#define KLTYPE_GABRICK (KLCLASS_IOBRICK | 0xd) + + +/* + * board structures + */ + +#define MAX_COMPTS_PER_BRD 24 + +typedef struct lboard_s { + klconf_off_t brd_next_any; /* Next BOARD */ + unsigned char struct_type; /* type of structure, local or remote */ + unsigned char brd_type; /* type+class */ + unsigned char brd_sversion; /* version of this structure */ + unsigned char brd_brevision; /* board revision */ + unsigned char brd_promver; /* board prom version, if any */ + unsigned char brd_flags; /* Enabled, Disabled etc */ + unsigned char brd_slot; /* slot number */ + unsigned short brd_debugsw; /* Debug switches */ + geoid_t brd_geoid; /* geo id */ + partid_t brd_partition; /* Partition number */ + unsigned short brd_diagval; /* diagnostic value */ + unsigned short brd_diagparm; /* diagnostic parameter */ + unsigned char brd_inventory; /* inventory history */ + unsigned char brd_numcompts; /* Number of components */ + nic_t brd_nic; /* Number in CAN */ + nasid_t brd_nasid; /* passed parameter */ + klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ + klconf_off_t brd_errinfo; /* Board's error information */ + struct lboard_s *brd_parent; /* Logical parent for this brd */ + char pad0[4]; + unsigned char brd_confidence; /* confidence that the board is bad */ + nasid_t brd_owner; /* who owns this board */ + unsigned char brd_nic_flags; /* To handle 8 more NICs */ + char pad1[24]; /* future expansion */ + char brd_name[32]; + nasid_t brd_next_same_host; /* host of next brd w/same nasid */ + klconf_off_t brd_next_same; /* Next BOARD with same nasid */ +} lboard_t; + +/* + * Generic info structure. This stores common info about a + * component. + */ + +typedef struct klinfo_s { /* Generic info */ + unsigned char struct_type; /* type of this structure */ + unsigned char struct_version; /* version of this structure */ + unsigned char flags; /* Enabled, disabled etc */ + unsigned char revision; /* component revision */ + unsigned short diagval; /* result of diagnostics */ + unsigned short diagparm; /* diagnostic parameter */ + unsigned char inventory; /* previous inventory status */ + unsigned short partid; /* widget part number */ + nic_t nic; /* MUst be aligned properly */ + unsigned char physid; /* physical id of component */ + unsigned int virtid; /* virtual id as seen by system */ + unsigned char widid; /* Widget id - if applicable */ + nasid_t nasid; /* node number - from parent */ + char pad1; /* pad out structure. */ + char pad2; /* pad out structure. */ + void *data; + klconf_off_t errinfo; /* component specific errors */ + unsigned short pad3; /* pci fields have moved over to */ + unsigned short pad4; /* klbri_t */ +} klinfo_t ; + + +static inline lboard_t *find_lboard_next(lboard_t * brd) +{ + if (brd && brd->brd_next_any) + return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any); + return NULL; +} + +#endif /* _ASM_IA64_SN_KLCONFIG_H */ diff --git a/arch/ia64/include/asm/sn/l1.h b/arch/ia64/include/asm/sn/l1.h new file mode 100644 index 000000000000..344bf44bb356 --- /dev/null +++ b/arch/ia64/include/asm/sn/l1.h @@ -0,0 +1,51 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992-1997,2000-2004 Silicon Graphics, Inc. All Rights Reserved. + */ + +#ifndef _ASM_IA64_SN_L1_H +#define _ASM_IA64_SN_L1_H + +/* brick type response codes */ +#define L1_BRICKTYPE_PX 0x23 /* # */ +#define L1_BRICKTYPE_PE 0x25 /* % */ +#define L1_BRICKTYPE_N_p0 0x26 /* & */ +#define L1_BRICKTYPE_IP45 0x34 /* 4 */ +#define L1_BRICKTYPE_IP41 0x35 /* 5 */ +#define L1_BRICKTYPE_TWISTER 0x36 /* 6 */ /* IP53 & ROUTER */ +#define L1_BRICKTYPE_IX 0x3d /* = */ +#define L1_BRICKTYPE_IP34 0x61 /* a */ +#define L1_BRICKTYPE_GA 0x62 /* b */ +#define L1_BRICKTYPE_C 0x63 /* c */ +#define L1_BRICKTYPE_OPUS_TIO 0x66 /* f */ +#define L1_BRICKTYPE_I 0x69 /* i */ +#define L1_BRICKTYPE_N 0x6e /* n */ +#define L1_BRICKTYPE_OPUS 0x6f /* o */ +#define L1_BRICKTYPE_P 0x70 /* p */ +#define L1_BRICKTYPE_R 0x72 /* r */ +#define L1_BRICKTYPE_CHI_CG 0x76 /* v */ +#define L1_BRICKTYPE_X 0x78 /* x */ +#define L1_BRICKTYPE_X2 0x79 /* y */ +#define L1_BRICKTYPE_SA 0x5e /* ^ */ +#define L1_BRICKTYPE_PA 0x6a /* j */ +#define L1_BRICKTYPE_IA 0x6b /* k */ +#define L1_BRICKTYPE_ATHENA 0x2b /* + */ +#define L1_BRICKTYPE_DAYTONA 0x7a /* z */ +#define L1_BRICKTYPE_1932 0x2c /* . */ +#define L1_BRICKTYPE_191010 0x2e /* , */ + +/* board type response codes */ +#define L1_BOARDTYPE_IP69 0x0100 /* CA */ +#define L1_BOARDTYPE_IP63 0x0200 /* CB */ +#define L1_BOARDTYPE_BASEIO 0x0300 /* IB */ +#define L1_BOARDTYPE_PCIE2SLOT 0x0400 /* IC */ +#define L1_BOARDTYPE_PCIX3SLOT 0x0500 /* ID */ +#define L1_BOARDTYPE_PCIXPCIE4SLOT 0x0600 /* IE */ +#define L1_BOARDTYPE_ABACUS 0x0700 /* AB */ +#define L1_BOARDTYPE_DAYTONA 0x0800 /* AD */ +#define L1_BOARDTYPE_INVAL (-1) /* invalid brick type */ + +#endif /* _ASM_IA64_SN_L1_H */ diff --git a/arch/ia64/include/asm/sn/leds.h b/arch/ia64/include/asm/sn/leds.h new file mode 100644 index 000000000000..66cf8c4d92c9 --- /dev/null +++ b/arch/ia64/include/asm/sn/leds.h @@ -0,0 +1,33 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_LEDS_H +#define _ASM_IA64_SN_LEDS_H + +#include +#include +#include + +#define LED0 (LOCAL_MMR_ADDR(SH_REAL_JUNK_BUS_LED0)) +#define LED_CPU_SHIFT 16 + +#define LED_CPU_HEARTBEAT 0x01 +#define LED_CPU_ACTIVITY 0x02 +#define LED_ALWAYS_SET 0x00 + +/* + * Basic macros for flashing the LEDS on an SGI SN. + */ + +static __inline__ void +set_led_bits(u8 value, u8 mask) +{ + pda->led_state = (pda->led_state & ~mask) | (value & mask); + *pda->led_address = (short) pda->led_state; +} + +#endif /* _ASM_IA64_SN_LEDS_H */ + diff --git a/arch/ia64/include/asm/sn/module.h b/arch/ia64/include/asm/sn/module.h new file mode 100644 index 000000000000..734e980ece2f --- /dev/null +++ b/arch/ia64/include/asm/sn/module.h @@ -0,0 +1,127 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_MODULE_H +#define _ASM_IA64_SN_MODULE_H + +/* parameter for format_module_id() */ +#define MODULE_FORMAT_BRIEF 1 +#define MODULE_FORMAT_LONG 2 +#define MODULE_FORMAT_LCD 3 + +/* + * Module id format + * + * 31-16 Rack ID (encoded class, group, number - 16-bit unsigned int) + * 15-8 Brick type (8-bit ascii character) + * 7-0 Bay (brick position in rack (0-63) - 8-bit unsigned int) + * + */ + +/* + * Macros for getting the brick type + */ +#define MODULE_BTYPE_MASK 0xff00 +#define MODULE_BTYPE_SHFT 8 +#define MODULE_GET_BTYPE(_m) (((_m) & MODULE_BTYPE_MASK) >> MODULE_BTYPE_SHFT) +#define MODULE_BT_TO_CHAR(_b) ((char)(_b)) +#define MODULE_GET_BTCHAR(_m) (MODULE_BT_TO_CHAR(MODULE_GET_BTYPE(_m))) + +/* + * Macros for getting the rack ID. + */ +#define MODULE_RACK_MASK 0xffff0000 +#define MODULE_RACK_SHFT 16 +#define MODULE_GET_RACK(_m) (((_m) & MODULE_RACK_MASK) >> MODULE_RACK_SHFT) + +/* + * Macros for getting the brick position + */ +#define MODULE_BPOS_MASK 0x00ff +#define MODULE_BPOS_SHFT 0 +#define MODULE_GET_BPOS(_m) (((_m) & MODULE_BPOS_MASK) >> MODULE_BPOS_SHFT) + +/* + * Macros for encoding and decoding rack IDs + * A rack number consists of three parts: + * class (0==CPU/mixed, 1==I/O), group, number + * + * Rack number is stored just as it is displayed on the screen: + * a 3-decimal-digit number. + */ +#define RACK_CLASS_DVDR 100 +#define RACK_GROUP_DVDR 10 +#define RACK_NUM_DVDR 1 + +#define RACK_CREATE_RACKID(_c, _g, _n) ((_c) * RACK_CLASS_DVDR + \ + (_g) * RACK_GROUP_DVDR + (_n) * RACK_NUM_DVDR) + +#define RACK_GET_CLASS(_r) ((_r) / RACK_CLASS_DVDR) +#define RACK_GET_GROUP(_r) (((_r) - RACK_GET_CLASS(_r) * \ + RACK_CLASS_DVDR) / RACK_GROUP_DVDR) +#define RACK_GET_NUM(_r) (((_r) - RACK_GET_CLASS(_r) * \ + RACK_CLASS_DVDR - RACK_GET_GROUP(_r) * \ + RACK_GROUP_DVDR) / RACK_NUM_DVDR) + +/* + * Macros for encoding and decoding rack IDs + * A rack number consists of three parts: + * class 1 bit, 0==CPU/mixed, 1==I/O + * group 2 bits for CPU/mixed, 3 bits for I/O + * number 3 bits for CPU/mixed, 2 bits for I/O (1 based) + */ +#define RACK_GROUP_BITS(_r) (RACK_GET_CLASS(_r) ? 3 : 2) +#define RACK_NUM_BITS(_r) (RACK_GET_CLASS(_r) ? 2 : 3) + +#define RACK_CLASS_MASK(_r) 0x20 +#define RACK_CLASS_SHFT(_r) 5 +#define RACK_ADD_CLASS(_r, _c) \ + ((_r) |= (_c) << RACK_CLASS_SHFT(_r) & RACK_CLASS_MASK(_r)) + +#define RACK_GROUP_SHFT(_r) RACK_NUM_BITS(_r) +#define RACK_GROUP_MASK(_r) \ + ( (((unsigned)1< +#include +#include +#include + +/* + * NUMA Node-Specific Data structures are defined in this file. + * In particular, this is the location of the node PDA. + * A pointer to the right node PDA is saved in each CPU PDA. + */ + +/* + * Node-specific data structure. + * + * One of these structures is allocated on each node of a NUMA system. + * + * This structure provides a convenient way of keeping together + * all per-node data structures. + */ +struct phys_cpuid { + short nasid; + char subnode; + char slice; +}; + +struct nodepda_s { + void *pdinfo; /* Platform-dependent per-node info */ + + /* + * The BTEs on this node are shared by the local cpus + */ + struct bteinfo_s bte_if[MAX_BTES_PER_NODE]; /* Virtual Interface */ + struct timer_list bte_recovery_timer; + spinlock_t bte_recovery_lock; + + /* + * Array of pointers to the nodepdas for each node. + */ + struct nodepda_s *pernode_pdaindr[MAX_COMPACT_NODES]; + + /* + * Array of physical cpu identifiers. Indexed by cpuid. + */ + struct phys_cpuid phys_cpuid[NR_CPUS]; + spinlock_t ptc_lock ____cacheline_aligned_in_smp; +}; + +typedef struct nodepda_s nodepda_t; + +/* + * Access Functions for node PDA. + * Since there is one nodepda for each node, we need a convenient mechanism + * to access these nodepdas without cluttering code with #ifdefs. + * The next set of definitions provides this. + * Routines are expected to use + * + * sn_nodepda - to access node PDA for the node on which code is running + * NODEPDA(cnodeid) - to access node PDA for cnodeid + */ + +DECLARE_PER_CPU(struct nodepda_s *, __sn_nodepda); +#define sn_nodepda (__get_cpu_var(__sn_nodepda)) +#define NODEPDA(cnodeid) (sn_nodepda->pernode_pdaindr[cnodeid]) + +/* + * Check if given a compact node id the corresponding node has all the + * cpus disabled. + */ +#define is_headless_node(cnodeid) (nr_cpus_node(cnodeid) == 0) + +#endif /* _ASM_IA64_SN_NODEPDA_H */ diff --git a/arch/ia64/include/asm/sn/pcibr_provider.h b/arch/ia64/include/asm/sn/pcibr_provider.h new file mode 100644 index 000000000000..da205b7cdaac --- /dev/null +++ b/arch/ia64/include/asm/sn/pcibr_provider.h @@ -0,0 +1,150 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992-1997,2000-2006 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H +#define _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H + +#include +#include + +/* Workarounds */ +#define PV907516 (1 << 1) /* TIOCP: Don't write the write buffer flush reg */ + +#define BUSTYPE_MASK 0x1 + +/* Macros given a pcibus structure */ +#define IS_PCIX(ps) ((ps)->pbi_bridge_mode & BUSTYPE_MASK) +#define IS_PCI_BRIDGE_ASIC(asic) (asic == PCIIO_ASIC_TYPE_PIC || \ + asic == PCIIO_ASIC_TYPE_TIOCP) +#define IS_PIC_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_PIC) +#define IS_TIOCP_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_TIOCP) + + +/* + * The different PCI Bridge types supported on the SGI Altix platforms + */ +#define PCIBR_BRIDGETYPE_UNKNOWN -1 +#define PCIBR_BRIDGETYPE_PIC 2 +#define PCIBR_BRIDGETYPE_TIOCP 3 + +/* + * Bridge 64bit Direct Map Attributes + */ +#define PCI64_ATTR_PREF (1ull << 59) +#define PCI64_ATTR_PREC (1ull << 58) +#define PCI64_ATTR_VIRTUAL (1ull << 57) +#define PCI64_ATTR_BAR (1ull << 56) +#define PCI64_ATTR_SWAP (1ull << 55) +#define PCI64_ATTR_VIRTUAL1 (1ull << 54) + +#define PCI32_LOCAL_BASE 0 +#define PCI32_MAPPED_BASE 0x40000000 +#define PCI32_DIRECT_BASE 0x80000000 + +#define IS_PCI32_MAPPED(x) ((u64)(x) < PCI32_DIRECT_BASE && \ + (u64)(x) >= PCI32_MAPPED_BASE) +#define IS_PCI32_DIRECT(x) ((u64)(x) >= PCI32_MAPPED_BASE) + + +/* + * Bridge PMU Address Transaltion Entry Attibutes + */ +#define PCI32_ATE_V (0x1 << 0) +#define PCI32_ATE_CO (0x1 << 1) /* PIC ASIC ONLY */ +#define PCI32_ATE_PIO (0x1 << 1) /* TIOCP ASIC ONLY */ +#define PCI32_ATE_MSI (0x1 << 2) +#define PCI32_ATE_PREF (0x1 << 3) +#define PCI32_ATE_BAR (0x1 << 4) +#define PCI32_ATE_ADDR_SHFT 12 + +#define MINIMAL_ATES_REQUIRED(addr, size) \ + (IOPG(IOPGOFF(addr) + (size) - 1) == IOPG((size) - 1)) + +#define MINIMAL_ATE_FLAG(addr, size) \ + (MINIMAL_ATES_REQUIRED((u64)addr, size) ? 1 : 0) + +/* bit 29 of the pci address is the SWAP bit */ +#define ATE_SWAPSHIFT 29 +#define ATE_SWAP_ON(x) ((x) |= (1 << ATE_SWAPSHIFT)) +#define ATE_SWAP_OFF(x) ((x) &= ~(1 << ATE_SWAPSHIFT)) + +/* + * I/O page size + */ +#if PAGE_SIZE < 16384 +#define IOPFNSHIFT 12 /* 4K per mapped page */ +#else +#define IOPFNSHIFT 14 /* 16K per mapped page */ +#endif + +#define IOPGSIZE (1 << IOPFNSHIFT) +#define IOPG(x) ((x) >> IOPFNSHIFT) +#define IOPGOFF(x) ((x) & (IOPGSIZE-1)) + +#define PCIBR_DEV_SWAP_DIR (1ull << 19) +#define PCIBR_CTRL_PAGE_SIZE (0x1 << 21) + +/* + * PMU resources. + */ +struct ate_resource{ + u64 *ate; + u64 num_ate; + u64 lowest_free_index; +}; + +struct pcibus_info { + struct pcibus_bussoft pbi_buscommon; /* common header */ + u32 pbi_moduleid; + short pbi_bridge_type; + short pbi_bridge_mode; + + struct ate_resource pbi_int_ate_resource; + u64 pbi_int_ate_size; + + u64 pbi_dir_xbase; + char pbi_hub_xid; + + u64 pbi_devreg[8]; + + u32 pbi_valid_devices; + u32 pbi_enabled_devices; + + spinlock_t pbi_lock; +}; + +extern int pcibr_init_provider(void); +extern void *pcibr_bus_fixup(struct pcibus_bussoft *, struct pci_controller *); +extern dma_addr_t pcibr_dma_map(struct pci_dev *, unsigned long, size_t, int type); +extern dma_addr_t pcibr_dma_map_consistent(struct pci_dev *, unsigned long, size_t, int type); +extern void pcibr_dma_unmap(struct pci_dev *, dma_addr_t, int); + +/* + * prototypes for the bridge asic register access routines in pcibr_reg.c + */ +extern void pcireg_control_bit_clr(struct pcibus_info *, u64); +extern void pcireg_control_bit_set(struct pcibus_info *, u64); +extern u64 pcireg_tflush_get(struct pcibus_info *); +extern u64 pcireg_intr_status_get(struct pcibus_info *); +extern void pcireg_intr_enable_bit_clr(struct pcibus_info *, u64); +extern void pcireg_intr_enable_bit_set(struct pcibus_info *, u64); +extern void pcireg_intr_addr_addr_set(struct pcibus_info *, int, u64); +extern void pcireg_force_intr_set(struct pcibus_info *, int); +extern u64 pcireg_wrb_flush_get(struct pcibus_info *, int); +extern void pcireg_int_ate_set(struct pcibus_info *, int, u64); +extern u64 __iomem * pcireg_int_ate_addr(struct pcibus_info *, int); +extern void pcibr_force_interrupt(struct sn_irq_info *sn_irq_info); +extern void pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info); +extern int pcibr_ate_alloc(struct pcibus_info *, int); +extern void pcibr_ate_free(struct pcibus_info *, int); +extern void ate_write(struct pcibus_info *, int, int, u64); +extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device, + void *resp, char **ssdt); +extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device, + int action, void *resp); +extern u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus); +#endif diff --git a/arch/ia64/include/asm/sn/pcibus_provider_defs.h b/arch/ia64/include/asm/sn/pcibus_provider_defs.h new file mode 100644 index 000000000000..8f7c83d0f6d3 --- /dev/null +++ b/arch/ia64/include/asm/sn/pcibus_provider_defs.h @@ -0,0 +1,68 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H +#define _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H + +/* + * SN pci asic types. Do not ever renumber these or reuse values. The + * values must agree with what prom thinks they are. + */ + +#define PCIIO_ASIC_TYPE_UNKNOWN 0 +#define PCIIO_ASIC_TYPE_PPB 1 +#define PCIIO_ASIC_TYPE_PIC 2 +#define PCIIO_ASIC_TYPE_TIOCP 3 +#define PCIIO_ASIC_TYPE_TIOCA 4 +#define PCIIO_ASIC_TYPE_TIOCE 5 + +#define PCIIO_ASIC_MAX_TYPES 6 + +/* + * Common pciio bus provider data. There should be one of these as the + * first field in any pciio based provider soft structure (e.g. pcibr_soft + * tioca_soft, etc). + */ + +struct pcibus_bussoft { + u32 bs_asic_type; /* chipset type */ + u32 bs_xid; /* xwidget id */ + u32 bs_persist_busnum; /* Persistent Bus Number */ + u32 bs_persist_segment; /* Segment Number */ + u64 bs_legacy_io; /* legacy io pio addr */ + u64 bs_legacy_mem; /* legacy mem pio addr */ + u64 bs_base; /* widget base */ + struct xwidget_info *bs_xwidget_info; +}; + +struct pci_controller; +/* + * SN pci bus indirection + */ + +struct sn_pcibus_provider { + dma_addr_t (*dma_map)(struct pci_dev *, unsigned long, size_t, int flags); + dma_addr_t (*dma_map_consistent)(struct pci_dev *, unsigned long, size_t, int flags); + void (*dma_unmap)(struct pci_dev *, dma_addr_t, int); + void * (*bus_fixup)(struct pcibus_bussoft *, struct pci_controller *); + void (*force_interrupt)(struct sn_irq_info *); + void (*target_interrupt)(struct sn_irq_info *); +}; + +/* + * Flags used by the map interfaces + * bits 3:0 specifies format of passed in address + * bit 4 specifies that address is to be used for MSI + */ + +#define SN_DMA_ADDRTYPE(x) ((x) & 0xf) +#define SN_DMA_ADDR_PHYS 1 /* address is an xio address. */ +#define SN_DMA_ADDR_XIO 2 /* address is phys memory */ +#define SN_DMA_MSI 0x10 /* Bus address is to be used for MSI */ + +extern struct sn_pcibus_provider *sn_pci_provider[]; +#endif /* _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H */ diff --git a/arch/ia64/include/asm/sn/pcidev.h b/arch/ia64/include/asm/sn/pcidev.h new file mode 100644 index 000000000000..1c2382cea807 --- /dev/null +++ b/arch/ia64/include/asm/sn/pcidev.h @@ -0,0 +1,85 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_PCI_PCIDEV_H +#define _ASM_IA64_SN_PCI_PCIDEV_H + +#include + +/* + * In ia64, pci_dev->sysdata must be a *pci_controller. To provide access to + * the pcidev_info structs for all devices under a controller, we keep a + * list of pcidev_info under pci_controller->platform_data. + */ +struct sn_platform_data { + void *provider_soft; + struct list_head pcidev_info; +}; + +#define SN_PLATFORM_DATA(busdev) \ + ((struct sn_platform_data *)(PCI_CONTROLLER(busdev)->platform_data)) + +#define SN_PCIDEV_INFO(dev) sn_pcidev_info_get(dev) + +/* + * Given a pci_bus, return the sn pcibus_bussoft struct. Note that + * this only works for root busses, not for busses represented by PPB's. + */ + +#define SN_PCIBUS_BUSSOFT(pci_bus) \ + ((struct pcibus_bussoft *)(SN_PLATFORM_DATA(pci_bus)->provider_soft)) + +#define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \ + ((struct pcibus_info *)(SN_PLATFORM_DATA(pci_bus)->provider_soft)) +/* + * Given a struct pci_dev, return the sn pcibus_bussoft struct. Note + * that this is not equivalent to SN_PCIBUS_BUSSOFT(pci_dev->bus) due + * due to possible PPB's in the path. + */ + +#define SN_PCIDEV_BUSSOFT(pci_dev) \ + (SN_PCIDEV_INFO(pci_dev)->pdi_host_pcidev_info->pdi_pcibus_info) + +#define SN_PCIDEV_BUSPROVIDER(pci_dev) \ + (SN_PCIDEV_INFO(pci_dev)->pdi_provider) + +#define PCIIO_BUS_NONE 255 /* bus 255 reserved */ +#define PCIIO_SLOT_NONE 255 +#define PCIIO_FUNC_NONE 255 +#define PCIIO_VENDOR_ID_NONE (-1) + +struct pcidev_info { + u64 pdi_pio_mapped_addr[7]; /* 6 BARs PLUS 1 ROM */ + u64 pdi_slot_host_handle; /* Bus and devfn Host pci_dev */ + + struct pcibus_bussoft *pdi_pcibus_info; /* Kernel common bus soft */ + struct pcidev_info *pdi_host_pcidev_info; /* Kernel Host pci_dev */ + struct pci_dev *pdi_linux_pcidev; /* Kernel pci_dev */ + + struct sn_irq_info *pdi_sn_irq_info; + struct sn_pcibus_provider *pdi_provider; /* sn pci ops */ + struct pci_dev *host_pci_dev; /* host bus link */ + struct list_head pdi_list; /* List of pcidev_info */ +}; + +extern void sn_irq_fixup(struct pci_dev *pci_dev, + struct sn_irq_info *sn_irq_info); +extern void sn_irq_unfixup(struct pci_dev *pci_dev); +extern struct pcidev_info * sn_pcidev_info_get(struct pci_dev *); +extern void sn_bus_fixup(struct pci_bus *); +extern void sn_acpi_bus_fixup(struct pci_bus *); +extern void sn_common_bus_fixup(struct pci_bus *, struct pcibus_bussoft *); +extern void sn_bus_store_sysdata(struct pci_dev *dev); +extern void sn_bus_free_sysdata(void); +extern void sn_generate_path(struct pci_bus *pci_bus, char *address); +extern void sn_io_slot_fixup(struct pci_dev *); +extern void sn_acpi_slot_fixup(struct pci_dev *); +extern void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *, + struct sn_irq_info *); +extern void sn_pci_unfixup_slot(struct pci_dev *dev); +extern void sn_irq_lh_init(void); +#endif /* _ASM_IA64_SN_PCI_PCIDEV_H */ diff --git a/arch/ia64/include/asm/sn/pda.h b/arch/ia64/include/asm/sn/pda.h new file mode 100644 index 000000000000..1c5108d44d8b --- /dev/null +++ b/arch/ia64/include/asm/sn/pda.h @@ -0,0 +1,69 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_PDA_H +#define _ASM_IA64_SN_PDA_H + +#include +#include +#include + + +/* + * CPU-specific data structure. + * + * One of these structures is allocated for each cpu of a NUMA system. + * + * This structure provides a convenient way of keeping together + * all SN per-cpu data structures. + */ + +typedef struct pda_s { + + /* + * Support for SN LEDs + */ + volatile short *led_address; + u8 led_state; + u8 hb_state; /* supports blinking heartbeat leds */ + unsigned int hb_count; + + unsigned int idle_flag; + + volatile unsigned long *bedrock_rev_id; + volatile unsigned long *pio_write_status_addr; + unsigned long pio_write_status_val; + volatile unsigned long *pio_shub_war_cam_addr; + + unsigned long sn_in_service_ivecs[4]; + int sn_lb_int_war_ticks; + int sn_last_irq; + int sn_first_irq; +} pda_t; + + +#define CACHE_ALIGN(x) (((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1)) + +/* + * PDA + * Per-cpu private data area for each cpu. The PDA is located immediately after + * the IA64 cpu_data area. A full page is allocated for the cp_data area for each + * cpu but only a small amout of the page is actually used. We put the SNIA PDA + * in the same page as the cpu_data area. Note that there is a check in the setup + * code to verify that we don't overflow the page. + * + * Seems like we should should cache-line align the pda so that any changes in the + * size of the cpu_data area don't change cache layout. Should we align to 32, 64, 128 + * or 512 boundary. Each has merits. For now, pick 128 but should be revisited later. + */ +DECLARE_PER_CPU(struct pda_s, pda_percpu); + +#define pda (&__ia64_per_cpu_var(pda_percpu)) + +#define pdacpu(cpu) (&per_cpu(pda_percpu, cpu)) + +#endif /* _ASM_IA64_SN_PDA_H */ diff --git a/arch/ia64/include/asm/sn/pic.h b/arch/ia64/include/asm/sn/pic.h new file mode 100644 index 000000000000..5f9da5fd6e56 --- /dev/null +++ b/arch/ia64/include/asm/sn/pic.h @@ -0,0 +1,261 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2003 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_PCI_PIC_H +#define _ASM_IA64_SN_PCI_PIC_H + +/* + * PIC AS DEVICE ZERO + * ------------------ + * + * PIC handles PCI/X busses. PCI/X requires that the 'bridge' (i.e. PIC) + * be designated as 'device 0'. That is a departure from earlier SGI + * PCI bridges. Because of that we use config space 1 to access the + * config space of the first actual PCI device on the bus. + * Here's what the PIC manual says: + * + * The current PCI-X bus specification now defines that the parent + * hosts bus bridge (PIC for example) must be device 0 on bus 0. PIC + * reduced the total number of devices from 8 to 4 and removed the + * device registers and windows, now only supporting devices 0,1,2, and + * 3. PIC did leave all 8 configuration space windows. The reason was + * there was nothing to gain by removing them. Here in lies the problem. + * The device numbering we do using 0 through 3 is unrelated to the device + * numbering which PCI-X requires in configuration space. In the past we + * correlated Configs pace and our device space 0 <-> 0, 1 <-> 1, etc. + * PCI-X requires we start a 1, not 0 and currently the PX brick + * does associate our: + * + * device 0 with configuration space window 1, + * device 1 with configuration space window 2, + * device 2 with configuration space window 3, + * device 3 with configuration space window 4. + * + * The net effect is that all config space access are off-by-one with + * relation to other per-slot accesses on the PIC. + * Here is a table that shows some of that: + * + * Internal Slot# + * | + * | 0 1 2 3 + * ----------|--------------------------------------- + * config | 0x21000 0x22000 0x23000 0x24000 + * | + * even rrb | 0[0] n/a 1[0] n/a [] == implied even/odd + * | + * odd rrb | n/a 0[1] n/a 1[1] + * | + * int dev | 00 01 10 11 + * | + * ext slot# | 1 2 3 4 + * ----------|--------------------------------------- + */ + +#define PIC_ATE_TARGETID_SHFT 8 +#define PIC_HOST_INTR_ADDR 0x0000FFFFFFFFFFFFUL +#define PIC_PCI64_ATTR_TARG_SHFT 60 + + +/***************************************************************************** + *********************** PIC MMR structure mapping *************************** + *****************************************************************************/ + +/* NOTE: PIC WAR. PV#854697. PIC does not allow writes just to [31:0] + * of a 64-bit register. When writing PIC registers, always write the + * entire 64 bits. + */ + +struct pic { + + /* 0x000000-0x00FFFF -- Local Registers */ + + /* 0x000000-0x000057 -- Standard Widget Configuration */ + u64 p_wid_id; /* 0x000000 */ + u64 p_wid_stat; /* 0x000008 */ + u64 p_wid_err_upper; /* 0x000010 */ + u64 p_wid_err_lower; /* 0x000018 */ + #define p_wid_err p_wid_err_lower + u64 p_wid_control; /* 0x000020 */ + u64 p_wid_req_timeout; /* 0x000028 */ + u64 p_wid_int_upper; /* 0x000030 */ + u64 p_wid_int_lower; /* 0x000038 */ + #define p_wid_int p_wid_int_lower + u64 p_wid_err_cmdword; /* 0x000040 */ + u64 p_wid_llp; /* 0x000048 */ + u64 p_wid_tflush; /* 0x000050 */ + + /* 0x000058-0x00007F -- Bridge-specific Widget Configuration */ + u64 p_wid_aux_err; /* 0x000058 */ + u64 p_wid_resp_upper; /* 0x000060 */ + u64 p_wid_resp_lower; /* 0x000068 */ + #define p_wid_resp p_wid_resp_lower + u64 p_wid_tst_pin_ctrl; /* 0x000070 */ + u64 p_wid_addr_lkerr; /* 0x000078 */ + + /* 0x000080-0x00008F -- PMU & MAP */ + u64 p_dir_map; /* 0x000080 */ + u64 _pad_000088; /* 0x000088 */ + + /* 0x000090-0x00009F -- SSRAM */ + u64 p_map_fault; /* 0x000090 */ + u64 _pad_000098; /* 0x000098 */ + + /* 0x0000A0-0x0000AF -- Arbitration */ + u64 p_arb; /* 0x0000A0 */ + u64 _pad_0000A8; /* 0x0000A8 */ + + /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */ + u64 p_ate_parity_err; /* 0x0000B0 */ + u64 _pad_0000B8; /* 0x0000B8 */ + + /* 0x0000C0-0x0000FF -- PCI/GIO */ + u64 p_bus_timeout; /* 0x0000C0 */ + u64 p_pci_cfg; /* 0x0000C8 */ + u64 p_pci_err_upper; /* 0x0000D0 */ + u64 p_pci_err_lower; /* 0x0000D8 */ + #define p_pci_err p_pci_err_lower + u64 _pad_0000E0[4]; /* 0x0000{E0..F8} */ + + /* 0x000100-0x0001FF -- Interrupt */ + u64 p_int_status; /* 0x000100 */ + u64 p_int_enable; /* 0x000108 */ + u64 p_int_rst_stat; /* 0x000110 */ + u64 p_int_mode; /* 0x000118 */ + u64 p_int_device; /* 0x000120 */ + u64 p_int_host_err; /* 0x000128 */ + u64 p_int_addr[8]; /* 0x0001{30,,,68} */ + u64 p_err_int_view; /* 0x000170 */ + u64 p_mult_int; /* 0x000178 */ + u64 p_force_always[8]; /* 0x0001{80,,,B8} */ + u64 p_force_pin[8]; /* 0x0001{C0,,,F8} */ + + /* 0x000200-0x000298 -- Device */ + u64 p_device[4]; /* 0x0002{00,,,18} */ + u64 _pad_000220[4]; /* 0x0002{20,,,38} */ + u64 p_wr_req_buf[4]; /* 0x0002{40,,,58} */ + u64 _pad_000260[4]; /* 0x0002{60,,,78} */ + u64 p_rrb_map[2]; /* 0x0002{80,,,88} */ + #define p_even_resp p_rrb_map[0] /* 0x000280 */ + #define p_odd_resp p_rrb_map[1] /* 0x000288 */ + u64 p_resp_status; /* 0x000290 */ + u64 p_resp_clear; /* 0x000298 */ + + u64 _pad_0002A0[12]; /* 0x0002{A0..F8} */ + + /* 0x000300-0x0003F8 -- Buffer Address Match Registers */ + struct { + u64 upper; /* 0x0003{00,,,F0} */ + u64 lower; /* 0x0003{08,,,F8} */ + } p_buf_addr_match[16]; + + /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */ + struct { + u64 flush_w_touch; /* 0x000{400,,,5C0} */ + u64 flush_wo_touch; /* 0x000{408,,,5C8} */ + u64 inflight; /* 0x000{410,,,5D0} */ + u64 prefetch; /* 0x000{418,,,5D8} */ + u64 total_pci_retry; /* 0x000{420,,,5E0} */ + u64 max_pci_retry; /* 0x000{428,,,5E8} */ + u64 max_latency; /* 0x000{430,,,5F0} */ + u64 clear_all; /* 0x000{438,,,5F8} */ + } p_buf_count[8]; + + + /* 0x000600-0x0009FF -- PCI/X registers */ + u64 p_pcix_bus_err_addr; /* 0x000600 */ + u64 p_pcix_bus_err_attr; /* 0x000608 */ + u64 p_pcix_bus_err_data; /* 0x000610 */ + u64 p_pcix_pio_split_addr; /* 0x000618 */ + u64 p_pcix_pio_split_attr; /* 0x000620 */ + u64 p_pcix_dma_req_err_attr; /* 0x000628 */ + u64 p_pcix_dma_req_err_addr; /* 0x000630 */ + u64 p_pcix_timeout; /* 0x000638 */ + + u64 _pad_000640[120]; /* 0x000{640,,,9F8} */ + + /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */ + struct { + u64 p_buf_addr; /* 0x000{A00,,,AF0} */ + u64 p_buf_attr; /* 0X000{A08,,,AF8} */ + } p_pcix_read_buf_64[16]; + + struct { + u64 p_buf_addr; /* 0x000{B00,,,BE0} */ + u64 p_buf_attr; /* 0x000{B08,,,BE8} */ + u64 p_buf_valid; /* 0x000{B10,,,BF0} */ + u64 __pad1; /* 0x000{B18,,,BF8} */ + } p_pcix_write_buf_64[8]; + + /* End of Local Registers -- Start of Address Map space */ + + char _pad_000c00[0x010000 - 0x000c00]; + + /* 0x010000-0x011fff -- Internal ATE RAM (Auto Parity Generation) */ + u64 p_int_ate_ram[1024]; /* 0x010000-0x011fff */ + + /* 0x012000-0x013fff -- Internal ATE RAM (Manual Parity Generation) */ + u64 p_int_ate_ram_mp[1024]; /* 0x012000-0x013fff */ + + char _pad_014000[0x18000 - 0x014000]; + + /* 0x18000-0x197F8 -- PIC Write Request Ram */ + u64 p_wr_req_lower[256]; /* 0x18000 - 0x187F8 */ + u64 p_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */ + u64 p_wr_req_parity[256]; /* 0x19000 - 0x197F8 */ + + char _pad_019800[0x20000 - 0x019800]; + + /* 0x020000-0x027FFF -- PCI Device Configuration Spaces */ + union { + u8 c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */ + u16 s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */ + u32 l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */ + u64 d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */ + union { + u8 c[0x100 / 1]; + u16 s[0x100 / 2]; + u32 l[0x100 / 4]; + u64 d[0x100 / 8]; + } f[8]; + } p_type0_cfg_dev[8]; /* 0x02{0000,,,7FFF} */ + + /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */ + union { + u8 c[0x1000 / 1]; /* 0x028000-0x029000 */ + u16 s[0x1000 / 2]; /* 0x028000-0x029000 */ + u32 l[0x1000 / 4]; /* 0x028000-0x029000 */ + u64 d[0x1000 / 8]; /* 0x028000-0x029000 */ + union { + u8 c[0x100 / 1]; + u16 s[0x100 / 2]; + u32 l[0x100 / 4]; + u64 d[0x100 / 8]; + } f[8]; + } p_type1_cfg; /* 0x028000-0x029000 */ + + char _pad_029000[0x030000-0x029000]; + + /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */ + union { + u8 c[8 / 1]; + u16 s[8 / 2]; + u32 l[8 / 4]; + u64 d[8 / 8]; + } p_pci_iack; /* 0x030000-0x030007 */ + + char _pad_030007[0x040000-0x030008]; + + /* 0x040000-0x030007 -- PCIX Special Cycle */ + union { + u8 c[8 / 1]; + u16 s[8 / 2]; + u32 l[8 / 4]; + u64 d[8 / 8]; + } p_pcix_cycle; /* 0x040000-0x040007 */ +}; + +#endif /* _ASM_IA64_SN_PCI_PIC_H */ diff --git a/arch/ia64/include/asm/sn/rw_mmr.h b/arch/ia64/include/asm/sn/rw_mmr.h new file mode 100644 index 000000000000..2d78f4c5a45e --- /dev/null +++ b/arch/ia64/include/asm/sn/rw_mmr.h @@ -0,0 +1,28 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002-2006 Silicon Graphics, Inc. All Rights Reserved. + */ +#ifndef _ASM_IA64_SN_RW_MMR_H +#define _ASM_IA64_SN_RW_MMR_H + + +/* + * This file that access MMRs via uncached physical addresses. + * pio_phys_read_mmr - read an MMR + * pio_phys_write_mmr - write an MMR + * pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0 + * Second MMR will be skipped if address is NULL + * + * Addresses passed to these routines should be uncached physical addresses + * ie., 0x80000.... + */ + + +extern long pio_phys_read_mmr(volatile long *mmr); +extern void pio_phys_write_mmr(volatile long *mmr, long val); +extern void pio_atomic_phys_write_mmrs(volatile long *mmr1, long val1, volatile long *mmr2, long val2); + +#endif /* _ASM_IA64_SN_RW_MMR_H */ diff --git a/arch/ia64/include/asm/sn/shub_mmr.h b/arch/ia64/include/asm/sn/shub_mmr.h new file mode 100644 index 000000000000..7de1d1d4b71a --- /dev/null +++ b/arch/ia64/include/asm/sn/shub_mmr.h @@ -0,0 +1,502 @@ +/* + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2001-2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_SHUB_MMR_H +#define _ASM_IA64_SN_SHUB_MMR_H + +/* ==================================================================== */ +/* Register "SH_IPI_INT" */ +/* SHub Inter-Processor Interrupt Registers */ +/* ==================================================================== */ +#define SH1_IPI_INT __IA64_UL_CONST(0x0000000110000380) +#define SH2_IPI_INT __IA64_UL_CONST(0x0000000010000380) + +/* SH_IPI_INT_TYPE */ +/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ +#define SH_IPI_INT_TYPE_SHFT 0 +#define SH_IPI_INT_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) + +/* SH_IPI_INT_AGT */ +/* Description: Agent, must be 0 for SHub */ +#define SH_IPI_INT_AGT_SHFT 3 +#define SH_IPI_INT_AGT_MASK __IA64_UL_CONST(0x0000000000000008) + +/* SH_IPI_INT_PID */ +/* Description: Processor ID, same setting as on targeted McKinley */ +#define SH_IPI_INT_PID_SHFT 4 +#define SH_IPI_INT_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) + +/* SH_IPI_INT_BASE */ +/* Description: Optional interrupt vector area, 2MB aligned */ +#define SH_IPI_INT_BASE_SHFT 21 +#define SH_IPI_INT_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) + +/* SH_IPI_INT_IDX */ +/* Description: Targeted McKinley interrupt vector */ +#define SH_IPI_INT_IDX_SHFT 52 +#define SH_IPI_INT_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) + +/* SH_IPI_INT_SEND */ +/* Description: Send Interrupt Message to PI, This generates a puls */ +#define SH_IPI_INT_SEND_SHFT 63 +#define SH_IPI_INT_SEND_MASK __IA64_UL_CONST(0x8000000000000000) + +/* ==================================================================== */ +/* Register "SH_EVENT_OCCURRED" */ +/* SHub Interrupt Event Occurred */ +/* ==================================================================== */ +#define SH1_EVENT_OCCURRED __IA64_UL_CONST(0x0000000110010000) +#define SH1_EVENT_OCCURRED_ALIAS __IA64_UL_CONST(0x0000000110010008) +#define SH2_EVENT_OCCURRED __IA64_UL_CONST(0x0000000010010000) +#define SH2_EVENT_OCCURRED_ALIAS __IA64_UL_CONST(0x0000000010010008) + +/* ==================================================================== */ +/* Register "SH_PI_CAM_CONTROL" */ +/* CRB CAM MMR Access Control */ +/* ==================================================================== */ +#define SH1_PI_CAM_CONTROL __IA64_UL_CONST(0x0000000120050300) + +/* ==================================================================== */ +/* Register "SH_SHUB_ID" */ +/* SHub ID Number */ +/* ==================================================================== */ +#define SH1_SHUB_ID __IA64_UL_CONST(0x0000000110060580) +#define SH1_SHUB_ID_REVISION_SHFT 28 +#define SH1_SHUB_ID_REVISION_MASK __IA64_UL_CONST(0x00000000f0000000) + +/* ==================================================================== */ +/* Register "SH_RTC" */ +/* Real-time Clock */ +/* ==================================================================== */ +#define SH1_RTC __IA64_UL_CONST(0x00000001101c0000) +#define SH2_RTC __IA64_UL_CONST(0x00000002101c0000) +#define SH_RTC_MASK __IA64_UL_CONST(0x007fffffffffffff) + +/* ==================================================================== */ +/* Register "SH_PIO_WRITE_STATUS_0|1" */ +/* PIO Write Status for CPU 0 & 1 */ +/* ==================================================================== */ +#define SH1_PIO_WRITE_STATUS_0 __IA64_UL_CONST(0x0000000120070200) +#define SH1_PIO_WRITE_STATUS_1 __IA64_UL_CONST(0x0000000120070280) +#define SH2_PIO_WRITE_STATUS_0 __IA64_UL_CONST(0x0000000020070200) +#define SH2_PIO_WRITE_STATUS_1 __IA64_UL_CONST(0x0000000020070280) +#define SH2_PIO_WRITE_STATUS_2 __IA64_UL_CONST(0x0000000020070300) +#define SH2_PIO_WRITE_STATUS_3 __IA64_UL_CONST(0x0000000020070380) + +/* SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK */ +/* Description: Deadlock response detected */ +#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT 1 +#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK \ + __IA64_UL_CONST(0x0000000000000002) + +/* SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT */ +/* Description: Count of currently pending PIO writes */ +#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT 56 +#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK \ + __IA64_UL_CONST(0x3f00000000000000) + +/* ==================================================================== */ +/* Register "SH_PIO_WRITE_STATUS_0_ALIAS" */ +/* ==================================================================== */ +#define SH1_PIO_WRITE_STATUS_0_ALIAS __IA64_UL_CONST(0x0000000120070208) +#define SH2_PIO_WRITE_STATUS_0_ALIAS __IA64_UL_CONST(0x0000000020070208) + +/* ==================================================================== */ +/* Register "SH_EVENT_OCCURRED" */ +/* SHub Interrupt Event Occurred */ +/* ==================================================================== */ +/* SH_EVENT_OCCURRED_UART_INT */ +/* Description: Pending Junk Bus UART Interrupt */ +#define SH_EVENT_OCCURRED_UART_INT_SHFT 20 +#define SH_EVENT_OCCURRED_UART_INT_MASK __IA64_UL_CONST(0x0000000000100000) + +/* SH_EVENT_OCCURRED_IPI_INT */ +/* Description: Pending IPI Interrupt */ +#define SH_EVENT_OCCURRED_IPI_INT_SHFT 28 +#define SH_EVENT_OCCURRED_IPI_INT_MASK __IA64_UL_CONST(0x0000000010000000) + +/* SH_EVENT_OCCURRED_II_INT0 */ +/* Description: Pending II 0 Interrupt */ +#define SH_EVENT_OCCURRED_II_INT0_SHFT 29 +#define SH_EVENT_OCCURRED_II_INT0_MASK __IA64_UL_CONST(0x0000000020000000) + +/* SH_EVENT_OCCURRED_II_INT1 */ +/* Description: Pending II 1 Interrupt */ +#define SH_EVENT_OCCURRED_II_INT1_SHFT 30 +#define SH_EVENT_OCCURRED_II_INT1_MASK __IA64_UL_CONST(0x0000000040000000) + +/* SH2_EVENT_OCCURRED_EXTIO_INT2 */ +/* Description: Pending SHUB 2 EXT IO INT2 */ +#define SH2_EVENT_OCCURRED_EXTIO_INT2_SHFT 33 +#define SH2_EVENT_OCCURRED_EXTIO_INT2_MASK __IA64_UL_CONST(0x0000000200000000) + +/* SH2_EVENT_OCCURRED_EXTIO_INT3 */ +/* Description: Pending SHUB 2 EXT IO INT3 */ +#define SH2_EVENT_OCCURRED_EXTIO_INT3_SHFT 34 +#define SH2_EVENT_OCCURRED_EXTIO_INT3_MASK __IA64_UL_CONST(0x0000000400000000) + +#define SH_ALL_INT_MASK \ + (SH_EVENT_OCCURRED_UART_INT_MASK | SH_EVENT_OCCURRED_IPI_INT_MASK | \ + SH_EVENT_OCCURRED_II_INT0_MASK | SH_EVENT_OCCURRED_II_INT1_MASK | \ + SH_EVENT_OCCURRED_II_INT1_MASK | SH2_EVENT_OCCURRED_EXTIO_INT2_MASK | \ + SH2_EVENT_OCCURRED_EXTIO_INT3_MASK) + + +/* ==================================================================== */ +/* LEDS */ +/* ==================================================================== */ +#define SH1_REAL_JUNK_BUS_LED0 0x7fed00000UL +#define SH1_REAL_JUNK_BUS_LED1 0x7fed10000UL +#define SH1_REAL_JUNK_BUS_LED2 0x7fed20000UL +#define SH1_REAL_JUNK_BUS_LED3 0x7fed30000UL + +#define SH2_REAL_JUNK_BUS_LED0 0xf0000000UL +#define SH2_REAL_JUNK_BUS_LED1 0xf0010000UL +#define SH2_REAL_JUNK_BUS_LED2 0xf0020000UL +#define SH2_REAL_JUNK_BUS_LED3 0xf0030000UL + +/* ==================================================================== */ +/* Register "SH1_PTC_0" */ +/* Puge Translation Cache Message Configuration Information */ +/* ==================================================================== */ +#define SH1_PTC_0 __IA64_UL_CONST(0x00000001101a0000) + +/* SH1_PTC_0_A */ +/* Description: Type */ +#define SH1_PTC_0_A_SHFT 0 + +/* SH1_PTC_0_PS */ +/* Description: Page Size */ +#define SH1_PTC_0_PS_SHFT 2 + +/* SH1_PTC_0_RID */ +/* Description: Region ID */ +#define SH1_PTC_0_RID_SHFT 8 + +/* SH1_PTC_0_START */ +/* Description: Start */ +#define SH1_PTC_0_START_SHFT 63 + +/* ==================================================================== */ +/* Register "SH1_PTC_1" */ +/* Puge Translation Cache Message Configuration Information */ +/* ==================================================================== */ +#define SH1_PTC_1 __IA64_UL_CONST(0x00000001101a0080) + +/* SH1_PTC_1_START */ +/* Description: PTC_1 Start */ +#define SH1_PTC_1_START_SHFT 63 + +/* ==================================================================== */ +/* Register "SH2_PTC" */ +/* Puge Translation Cache Message Configuration Information */ +/* ==================================================================== */ +#define SH2_PTC __IA64_UL_CONST(0x0000000170000000) + +/* SH2_PTC_A */ +/* Description: Type */ +#define SH2_PTC_A_SHFT 0 + +/* SH2_PTC_PS */ +/* Description: Page Size */ +#define SH2_PTC_PS_SHFT 2 + +/* SH2_PTC_RID */ +/* Description: Region ID */ +#define SH2_PTC_RID_SHFT 4 + +/* SH2_PTC_START */ +/* Description: Start */ +#define SH2_PTC_START_SHFT 63 + +/* SH2_PTC_ADDR_RID */ +/* Description: Region ID */ +#define SH2_PTC_ADDR_SHFT 4 +#define SH2_PTC_ADDR_MASK __IA64_UL_CONST(0x1ffffffffffff000) + +/* ==================================================================== */ +/* Register "SH_RTC1_INT_CONFIG" */ +/* SHub RTC 1 Interrupt Config Registers */ +/* ==================================================================== */ + +#define SH1_RTC1_INT_CONFIG __IA64_UL_CONST(0x0000000110001480) +#define SH2_RTC1_INT_CONFIG __IA64_UL_CONST(0x0000000010001480) +#define SH_RTC1_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff) +#define SH_RTC1_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_RTC1_INT_CONFIG_TYPE */ +/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ +#define SH_RTC1_INT_CONFIG_TYPE_SHFT 0 +#define SH_RTC1_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) + +/* SH_RTC1_INT_CONFIG_AGT */ +/* Description: Agent, must be 0 for SHub */ +#define SH_RTC1_INT_CONFIG_AGT_SHFT 3 +#define SH_RTC1_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008) + +/* SH_RTC1_INT_CONFIG_PID */ +/* Description: Processor ID, same setting as on targeted McKinley */ +#define SH_RTC1_INT_CONFIG_PID_SHFT 4 +#define SH_RTC1_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) + +/* SH_RTC1_INT_CONFIG_BASE */ +/* Description: Optional interrupt vector area, 2MB aligned */ +#define SH_RTC1_INT_CONFIG_BASE_SHFT 21 +#define SH_RTC1_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) + +/* SH_RTC1_INT_CONFIG_IDX */ +/* Description: Targeted McKinley interrupt vector */ +#define SH_RTC1_INT_CONFIG_IDX_SHFT 52 +#define SH_RTC1_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) + +/* ==================================================================== */ +/* Register "SH_RTC1_INT_ENABLE" */ +/* SHub RTC 1 Interrupt Enable Registers */ +/* ==================================================================== */ + +#define SH1_RTC1_INT_ENABLE __IA64_UL_CONST(0x0000000110001500) +#define SH2_RTC1_INT_ENABLE __IA64_UL_CONST(0x0000000010001500) +#define SH_RTC1_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001) +#define SH_RTC1_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_RTC1_INT_ENABLE_RTC1_ENABLE */ +/* Description: Enable RTC 1 Interrupt */ +#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT 0 +#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK \ + __IA64_UL_CONST(0x0000000000000001) + +/* ==================================================================== */ +/* Register "SH_RTC2_INT_CONFIG" */ +/* SHub RTC 2 Interrupt Config Registers */ +/* ==================================================================== */ + +#define SH1_RTC2_INT_CONFIG __IA64_UL_CONST(0x0000000110001580) +#define SH2_RTC2_INT_CONFIG __IA64_UL_CONST(0x0000000010001580) +#define SH_RTC2_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff) +#define SH_RTC2_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_RTC2_INT_CONFIG_TYPE */ +/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ +#define SH_RTC2_INT_CONFIG_TYPE_SHFT 0 +#define SH_RTC2_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) + +/* SH_RTC2_INT_CONFIG_AGT */ +/* Description: Agent, must be 0 for SHub */ +#define SH_RTC2_INT_CONFIG_AGT_SHFT 3 +#define SH_RTC2_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008) + +/* SH_RTC2_INT_CONFIG_PID */ +/* Description: Processor ID, same setting as on targeted McKinley */ +#define SH_RTC2_INT_CONFIG_PID_SHFT 4 +#define SH_RTC2_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) + +/* SH_RTC2_INT_CONFIG_BASE */ +/* Description: Optional interrupt vector area, 2MB aligned */ +#define SH_RTC2_INT_CONFIG_BASE_SHFT 21 +#define SH_RTC2_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) + +/* SH_RTC2_INT_CONFIG_IDX */ +/* Description: Targeted McKinley interrupt vector */ +#define SH_RTC2_INT_CONFIG_IDX_SHFT 52 +#define SH_RTC2_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) + +/* ==================================================================== */ +/* Register "SH_RTC2_INT_ENABLE" */ +/* SHub RTC 2 Interrupt Enable Registers */ +/* ==================================================================== */ + +#define SH1_RTC2_INT_ENABLE __IA64_UL_CONST(0x0000000110001600) +#define SH2_RTC2_INT_ENABLE __IA64_UL_CONST(0x0000000010001600) +#define SH_RTC2_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001) +#define SH_RTC2_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_RTC2_INT_ENABLE_RTC2_ENABLE */ +/* Description: Enable RTC 2 Interrupt */ +#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT 0 +#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK \ + __IA64_UL_CONST(0x0000000000000001) + +/* ==================================================================== */ +/* Register "SH_RTC3_INT_CONFIG" */ +/* SHub RTC 3 Interrupt Config Registers */ +/* ==================================================================== */ + +#define SH1_RTC3_INT_CONFIG __IA64_UL_CONST(0x0000000110001680) +#define SH2_RTC3_INT_CONFIG __IA64_UL_CONST(0x0000000010001680) +#define SH_RTC3_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff) +#define SH_RTC3_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_RTC3_INT_CONFIG_TYPE */ +/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ +#define SH_RTC3_INT_CONFIG_TYPE_SHFT 0 +#define SH_RTC3_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) + +/* SH_RTC3_INT_CONFIG_AGT */ +/* Description: Agent, must be 0 for SHub */ +#define SH_RTC3_INT_CONFIG_AGT_SHFT 3 +#define SH_RTC3_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008) + +/* SH_RTC3_INT_CONFIG_PID */ +/* Description: Processor ID, same setting as on targeted McKinley */ +#define SH_RTC3_INT_CONFIG_PID_SHFT 4 +#define SH_RTC3_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) + +/* SH_RTC3_INT_CONFIG_BASE */ +/* Description: Optional interrupt vector area, 2MB aligned */ +#define SH_RTC3_INT_CONFIG_BASE_SHFT 21 +#define SH_RTC3_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) + +/* SH_RTC3_INT_CONFIG_IDX */ +/* Description: Targeted McKinley interrupt vector */ +#define SH_RTC3_INT_CONFIG_IDX_SHFT 52 +#define SH_RTC3_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) + +/* ==================================================================== */ +/* Register "SH_RTC3_INT_ENABLE" */ +/* SHub RTC 3 Interrupt Enable Registers */ +/* ==================================================================== */ + +#define SH1_RTC3_INT_ENABLE __IA64_UL_CONST(0x0000000110001700) +#define SH2_RTC3_INT_ENABLE __IA64_UL_CONST(0x0000000010001700) +#define SH_RTC3_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001) +#define SH_RTC3_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_RTC3_INT_ENABLE_RTC3_ENABLE */ +/* Description: Enable RTC 3 Interrupt */ +#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT 0 +#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK \ + __IA64_UL_CONST(0x0000000000000001) + +/* SH_EVENT_OCCURRED_RTC1_INT */ +/* Description: Pending RTC 1 Interrupt */ +#define SH_EVENT_OCCURRED_RTC1_INT_SHFT 24 +#define SH_EVENT_OCCURRED_RTC1_INT_MASK __IA64_UL_CONST(0x0000000001000000) + +/* SH_EVENT_OCCURRED_RTC2_INT */ +/* Description: Pending RTC 2 Interrupt */ +#define SH_EVENT_OCCURRED_RTC2_INT_SHFT 25 +#define SH_EVENT_OCCURRED_RTC2_INT_MASK __IA64_UL_CONST(0x0000000002000000) + +/* SH_EVENT_OCCURRED_RTC3_INT */ +/* Description: Pending RTC 3 Interrupt */ +#define SH_EVENT_OCCURRED_RTC3_INT_SHFT 26 +#define SH_EVENT_OCCURRED_RTC3_INT_MASK __IA64_UL_CONST(0x0000000004000000) + +/* ==================================================================== */ +/* Register "SH_IPI_ACCESS" */ +/* CPU interrupt Access Permission Bits */ +/* ==================================================================== */ + +#define SH1_IPI_ACCESS __IA64_UL_CONST(0x0000000110060480) +#define SH2_IPI_ACCESS0 __IA64_UL_CONST(0x0000000010060c00) +#define SH2_IPI_ACCESS1 __IA64_UL_CONST(0x0000000010060c80) +#define SH2_IPI_ACCESS2 __IA64_UL_CONST(0x0000000010060d00) +#define SH2_IPI_ACCESS3 __IA64_UL_CONST(0x0000000010060d80) + +/* ==================================================================== */ +/* Register "SH_INT_CMPB" */ +/* RTC Compare Value for Processor B */ +/* ==================================================================== */ + +#define SH1_INT_CMPB __IA64_UL_CONST(0x00000001101b0080) +#define SH2_INT_CMPB __IA64_UL_CONST(0x00000000101b0080) +#define SH_INT_CMPB_MASK __IA64_UL_CONST(0x007fffffffffffff) +#define SH_INT_CMPB_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_INT_CMPB_REAL_TIME_CMPB */ +/* Description: Real Time Clock Compare */ +#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT 0 +#define SH_INT_CMPB_REAL_TIME_CMPB_MASK __IA64_UL_CONST(0x007fffffffffffff) + +/* ==================================================================== */ +/* Register "SH_INT_CMPC" */ +/* RTC Compare Value for Processor C */ +/* ==================================================================== */ + +#define SH1_INT_CMPC __IA64_UL_CONST(0x00000001101b0100) +#define SH2_INT_CMPC __IA64_UL_CONST(0x00000000101b0100) +#define SH_INT_CMPC_MASK __IA64_UL_CONST(0x007fffffffffffff) +#define SH_INT_CMPC_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_INT_CMPC_REAL_TIME_CMPC */ +/* Description: Real Time Clock Compare */ +#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT 0 +#define SH_INT_CMPC_REAL_TIME_CMPC_MASK __IA64_UL_CONST(0x007fffffffffffff) + +/* ==================================================================== */ +/* Register "SH_INT_CMPD" */ +/* RTC Compare Value for Processor D */ +/* ==================================================================== */ + +#define SH1_INT_CMPD __IA64_UL_CONST(0x00000001101b0180) +#define SH2_INT_CMPD __IA64_UL_CONST(0x00000000101b0180) +#define SH_INT_CMPD_MASK __IA64_UL_CONST(0x007fffffffffffff) +#define SH_INT_CMPD_INIT __IA64_UL_CONST(0x0000000000000000) + +/* SH_INT_CMPD_REAL_TIME_CMPD */ +/* Description: Real Time Clock Compare */ +#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT 0 +#define SH_INT_CMPD_REAL_TIME_CMPD_MASK __IA64_UL_CONST(0x007fffffffffffff) + +/* ==================================================================== */ +/* Register "SH_MD_DQLP_MMR_DIR_PRIVEC0" */ +/* privilege vector for acc=0 */ +/* ==================================================================== */ +#define SH1_MD_DQLP_MMR_DIR_PRIVEC0 __IA64_UL_CONST(0x0000000100030300) + +/* ==================================================================== */ +/* Register "SH_MD_DQRP_MMR_DIR_PRIVEC0" */ +/* privilege vector for acc=0 */ +/* ==================================================================== */ +#define SH1_MD_DQRP_MMR_DIR_PRIVEC0 __IA64_UL_CONST(0x0000000100050300) + +/* ==================================================================== */ +/* Some MMRs are functionally identical (or close enough) on both SHUB1 */ +/* and SHUB2 that it makes sense to define a geberic name for the MMR. */ +/* It is acceptible to use (for example) SH_IPI_INT to reference the */ +/* the IPI MMR. The value of SH_IPI_INT is determined at runtime based */ +/* on the type of the SHUB. Do not use these #defines in performance */ +/* critical code or loops - there is a small performance penalty. */ +/* ==================================================================== */ +#define shubmmr(a,b) (is_shub2() ? a##2_##b : a##1_##b) + +#define SH_REAL_JUNK_BUS_LED0 shubmmr(SH, REAL_JUNK_BUS_LED0) +#define SH_IPI_INT shubmmr(SH, IPI_INT) +#define SH_EVENT_OCCURRED shubmmr(SH, EVENT_OCCURRED) +#define SH_EVENT_OCCURRED_ALIAS shubmmr(SH, EVENT_OCCURRED_ALIAS) +#define SH_RTC shubmmr(SH, RTC) +#define SH_RTC1_INT_CONFIG shubmmr(SH, RTC1_INT_CONFIG) +#define SH_RTC1_INT_ENABLE shubmmr(SH, RTC1_INT_ENABLE) +#define SH_RTC2_INT_CONFIG shubmmr(SH, RTC2_INT_CONFIG) +#define SH_RTC2_INT_ENABLE shubmmr(SH, RTC2_INT_ENABLE) +#define SH_RTC3_INT_CONFIG shubmmr(SH, RTC3_INT_CONFIG) +#define SH_RTC3_INT_ENABLE shubmmr(SH, RTC3_INT_ENABLE) +#define SH_INT_CMPB shubmmr(SH, INT_CMPB) +#define SH_INT_CMPC shubmmr(SH, INT_CMPC) +#define SH_INT_CMPD shubmmr(SH, INT_CMPD) + +/* ========================================================================== */ +/* Register "SH2_BT_ENG_CSR_0" */ +/* Engine 0 Control and Status Register */ +/* ========================================================================== */ + +#define SH2_BT_ENG_CSR_0 __IA64_UL_CONST(0x0000000030040000) +#define SH2_BT_ENG_SRC_ADDR_0 __IA64_UL_CONST(0x0000000030040080) +#define SH2_BT_ENG_DEST_ADDR_0 __IA64_UL_CONST(0x0000000030040100) +#define SH2_BT_ENG_NOTIF_ADDR_0 __IA64_UL_CONST(0x0000000030040180) + +/* ========================================================================== */ +/* BTE interfaces 1-3 */ +/* ========================================================================== */ + +#define SH2_BT_ENG_CSR_1 __IA64_UL_CONST(0x0000000030050000) +#define SH2_BT_ENG_CSR_2 __IA64_UL_CONST(0x0000000030060000) +#define SH2_BT_ENG_CSR_3 __IA64_UL_CONST(0x0000000030070000) + +#endif /* _ASM_IA64_SN_SHUB_MMR_H */ diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h new file mode 100644 index 000000000000..22a6f18a5313 --- /dev/null +++ b/arch/ia64/include/asm/sn/shubio.h @@ -0,0 +1,3358 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_SHUBIO_H +#define _ASM_IA64_SN_SHUBIO_H + +#define HUB_WIDGET_ID_MAX 0xf +#define IIO_NUM_ITTES 7 +#define HUB_NUM_BIG_WINDOW (IIO_NUM_ITTES - 1) + +#define IIO_WID 0x00400000 /* Crosstalk Widget Identification */ + /* This register is also accessible from + * Crosstalk at address 0x0. */ +#define IIO_WSTAT 0x00400008 /* Crosstalk Widget Status */ +#define IIO_WCR 0x00400020 /* Crosstalk Widget Control Register */ +#define IIO_ILAPR 0x00400100 /* IO Local Access Protection Register */ +#define IIO_ILAPO 0x00400108 /* IO Local Access Protection Override */ +#define IIO_IOWA 0x00400110 /* IO Outbound Widget Access */ +#define IIO_IIWA 0x00400118 /* IO Inbound Widget Access */ +#define IIO_IIDEM 0x00400120 /* IO Inbound Device Error Mask */ +#define IIO_ILCSR 0x00400128 /* IO LLP Control and Status Register */ +#define IIO_ILLR 0x00400130 /* IO LLP Log Register */ +#define IIO_IIDSR 0x00400138 /* IO Interrupt Destination */ + +#define IIO_IGFX0 0x00400140 /* IO Graphics Node-Widget Map 0 */ +#define IIO_IGFX1 0x00400148 /* IO Graphics Node-Widget Map 1 */ + +#define IIO_ISCR0 0x00400150 /* IO Scratch Register 0 */ +#define IIO_ISCR1 0x00400158 /* IO Scratch Register 1 */ + +#define IIO_ITTE1 0x00400160 /* IO Translation Table Entry 1 */ +#define IIO_ITTE2 0x00400168 /* IO Translation Table Entry 2 */ +#define IIO_ITTE3 0x00400170 /* IO Translation Table Entry 3 */ +#define IIO_ITTE4 0x00400178 /* IO Translation Table Entry 4 */ +#define IIO_ITTE5 0x00400180 /* IO Translation Table Entry 5 */ +#define IIO_ITTE6 0x00400188 /* IO Translation Table Entry 6 */ +#define IIO_ITTE7 0x00400190 /* IO Translation Table Entry 7 */ + +#define IIO_IPRB0 0x00400198 /* IO PRB Entry 0 */ +#define IIO_IPRB8 0x004001A0 /* IO PRB Entry 8 */ +#define IIO_IPRB9 0x004001A8 /* IO PRB Entry 9 */ +#define IIO_IPRBA 0x004001B0 /* IO PRB Entry A */ +#define IIO_IPRBB 0x004001B8 /* IO PRB Entry B */ +#define IIO_IPRBC 0x004001C0 /* IO PRB Entry C */ +#define IIO_IPRBD 0x004001C8 /* IO PRB Entry D */ +#define IIO_IPRBE 0x004001D0 /* IO PRB Entry E */ +#define IIO_IPRBF 0x004001D8 /* IO PRB Entry F */ + +#define IIO_IXCC 0x004001E0 /* IO Crosstalk Credit Count Timeout */ +#define IIO_IMEM 0x004001E8 /* IO Miscellaneous Error Mask */ +#define IIO_IXTT 0x004001F0 /* IO Crosstalk Timeout Threshold */ +#define IIO_IECLR 0x004001F8 /* IO Error Clear Register */ +#define IIO_IBCR 0x00400200 /* IO BTE Control Register */ + +#define IIO_IXSM 0x00400208 /* IO Crosstalk Spurious Message */ +#define IIO_IXSS 0x00400210 /* IO Crosstalk Spurious Sideband */ + +#define IIO_ILCT 0x00400218 /* IO LLP Channel Test */ + +#define IIO_IIEPH1 0x00400220 /* IO Incoming Error Packet Header, Part 1 */ +#define IIO_IIEPH2 0x00400228 /* IO Incoming Error Packet Header, Part 2 */ + +#define IIO_ISLAPR 0x00400230 /* IO SXB Local Access Protection Regster */ +#define IIO_ISLAPO 0x00400238 /* IO SXB Local Access Protection Override */ + +#define IIO_IWI 0x00400240 /* IO Wrapper Interrupt Register */ +#define IIO_IWEL 0x00400248 /* IO Wrapper Error Log Register */ +#define IIO_IWC 0x00400250 /* IO Wrapper Control Register */ +#define IIO_IWS 0x00400258 /* IO Wrapper Status Register */ +#define IIO_IWEIM 0x00400260 /* IO Wrapper Error Interrupt Masking Register */ + +#define IIO_IPCA 0x00400300 /* IO PRB Counter Adjust */ + +#define IIO_IPRTE0_A 0x00400308 /* IO PIO Read Address Table Entry 0, Part A */ +#define IIO_IPRTE1_A 0x00400310 /* IO PIO Read Address Table Entry 1, Part A */ +#define IIO_IPRTE2_A 0x00400318 /* IO PIO Read Address Table Entry 2, Part A */ +#define IIO_IPRTE3_A 0x00400320 /* IO PIO Read Address Table Entry 3, Part A */ +#define IIO_IPRTE4_A 0x00400328 /* IO PIO Read Address Table Entry 4, Part A */ +#define IIO_IPRTE5_A 0x00400330 /* IO PIO Read Address Table Entry 5, Part A */ +#define IIO_IPRTE6_A 0x00400338 /* IO PIO Read Address Table Entry 6, Part A */ +#define IIO_IPRTE7_A 0x00400340 /* IO PIO Read Address Table Entry 7, Part A */ + +#define IIO_IPRTE0_B 0x00400348 /* IO PIO Read Address Table Entry 0, Part B */ +#define IIO_IPRTE1_B 0x00400350 /* IO PIO Read Address Table Entry 1, Part B */ +#define IIO_IPRTE2_B 0x00400358 /* IO PIO Read Address Table Entry 2, Part B */ +#define IIO_IPRTE3_B 0x00400360 /* IO PIO Read Address Table Entry 3, Part B */ +#define IIO_IPRTE4_B 0x00400368 /* IO PIO Read Address Table Entry 4, Part B */ +#define IIO_IPRTE5_B 0x00400370 /* IO PIO Read Address Table Entry 5, Part B */ +#define IIO_IPRTE6_B 0x00400378 /* IO PIO Read Address Table Entry 6, Part B */ +#define IIO_IPRTE7_B 0x00400380 /* IO PIO Read Address Table Entry 7, Part B */ + +#define IIO_IPDR 0x00400388 /* IO PIO Deallocation Register */ +#define IIO_ICDR 0x00400390 /* IO CRB Entry Deallocation Register */ +#define IIO_IFDR 0x00400398 /* IO IOQ FIFO Depth Register */ +#define IIO_IIAP 0x004003A0 /* IO IIQ Arbitration Parameters */ +#define IIO_ICMR 0x004003A8 /* IO CRB Management Register */ +#define IIO_ICCR 0x004003B0 /* IO CRB Control Register */ +#define IIO_ICTO 0x004003B8 /* IO CRB Timeout */ +#define IIO_ICTP 0x004003C0 /* IO CRB Timeout Prescalar */ + +#define IIO_ICRB0_A 0x00400400 /* IO CRB Entry 0_A */ +#define IIO_ICRB0_B 0x00400408 /* IO CRB Entry 0_B */ +#define IIO_ICRB0_C 0x00400410 /* IO CRB Entry 0_C */ +#define IIO_ICRB0_D 0x00400418 /* IO CRB Entry 0_D */ +#define IIO_ICRB0_E 0x00400420 /* IO CRB Entry 0_E */ + +#define IIO_ICRB1_A 0x00400430 /* IO CRB Entry 1_A */ +#define IIO_ICRB1_B 0x00400438 /* IO CRB Entry 1_B */ +#define IIO_ICRB1_C 0x00400440 /* IO CRB Entry 1_C */ +#define IIO_ICRB1_D 0x00400448 /* IO CRB Entry 1_D */ +#define IIO_ICRB1_E 0x00400450 /* IO CRB Entry 1_E */ + +#define IIO_ICRB2_A 0x00400460 /* IO CRB Entry 2_A */ +#define IIO_ICRB2_B 0x00400468 /* IO CRB Entry 2_B */ +#define IIO_ICRB2_C 0x00400470 /* IO CRB Entry 2_C */ +#define IIO_ICRB2_D 0x00400478 /* IO CRB Entry 2_D */ +#define IIO_ICRB2_E 0x00400480 /* IO CRB Entry 2_E */ + +#define IIO_ICRB3_A 0x00400490 /* IO CRB Entry 3_A */ +#define IIO_ICRB3_B 0x00400498 /* IO CRB Entry 3_B */ +#define IIO_ICRB3_C 0x004004a0 /* IO CRB Entry 3_C */ +#define IIO_ICRB3_D 0x004004a8 /* IO CRB Entry 3_D */ +#define IIO_ICRB3_E 0x004004b0 /* IO CRB Entry 3_E */ + +#define IIO_ICRB4_A 0x004004c0 /* IO CRB Entry 4_A */ +#define IIO_ICRB4_B 0x004004c8 /* IO CRB Entry 4_B */ +#define IIO_ICRB4_C 0x004004d0 /* IO CRB Entry 4_C */ +#define IIO_ICRB4_D 0x004004d8 /* IO CRB Entry 4_D */ +#define IIO_ICRB4_E 0x004004e0 /* IO CRB Entry 4_E */ + +#define IIO_ICRB5_A 0x004004f0 /* IO CRB Entry 5_A */ +#define IIO_ICRB5_B 0x004004f8 /* IO CRB Entry 5_B */ +#define IIO_ICRB5_C 0x00400500 /* IO CRB Entry 5_C */ +#define IIO_ICRB5_D 0x00400508 /* IO CRB Entry 5_D */ +#define IIO_ICRB5_E 0x00400510 /* IO CRB Entry 5_E */ + +#define IIO_ICRB6_A 0x00400520 /* IO CRB Entry 6_A */ +#define IIO_ICRB6_B 0x00400528 /* IO CRB Entry 6_B */ +#define IIO_ICRB6_C 0x00400530 /* IO CRB Entry 6_C */ +#define IIO_ICRB6_D 0x00400538 /* IO CRB Entry 6_D */ +#define IIO_ICRB6_E 0x00400540 /* IO CRB Entry 6_E */ + +#define IIO_ICRB7_A 0x00400550 /* IO CRB Entry 7_A */ +#define IIO_ICRB7_B 0x00400558 /* IO CRB Entry 7_B */ +#define IIO_ICRB7_C 0x00400560 /* IO CRB Entry 7_C */ +#define IIO_ICRB7_D 0x00400568 /* IO CRB Entry 7_D */ +#define IIO_ICRB7_E 0x00400570 /* IO CRB Entry 7_E */ + +#define IIO_ICRB8_A 0x00400580 /* IO CRB Entry 8_A */ +#define IIO_ICRB8_B 0x00400588 /* IO CRB Entry 8_B */ +#define IIO_ICRB8_C 0x00400590 /* IO CRB Entry 8_C */ +#define IIO_ICRB8_D 0x00400598 /* IO CRB Entry 8_D */ +#define IIO_ICRB8_E 0x004005a0 /* IO CRB Entry 8_E */ + +#define IIO_ICRB9_A 0x004005b0 /* IO CRB Entry 9_A */ +#define IIO_ICRB9_B 0x004005b8 /* IO CRB Entry 9_B */ +#define IIO_ICRB9_C 0x004005c0 /* IO CRB Entry 9_C */ +#define IIO_ICRB9_D 0x004005c8 /* IO CRB Entry 9_D */ +#define IIO_ICRB9_E 0x004005d0 /* IO CRB Entry 9_E */ + +#define IIO_ICRBA_A 0x004005e0 /* IO CRB Entry A_A */ +#define IIO_ICRBA_B 0x004005e8 /* IO CRB Entry A_B */ +#define IIO_ICRBA_C 0x004005f0 /* IO CRB Entry A_C */ +#define IIO_ICRBA_D 0x004005f8 /* IO CRB Entry A_D */ +#define IIO_ICRBA_E 0x00400600 /* IO CRB Entry A_E */ + +#define IIO_ICRBB_A 0x00400610 /* IO CRB Entry B_A */ +#define IIO_ICRBB_B 0x00400618 /* IO CRB Entry B_B */ +#define IIO_ICRBB_C 0x00400620 /* IO CRB Entry B_C */ +#define IIO_ICRBB_D 0x00400628 /* IO CRB Entry B_D */ +#define IIO_ICRBB_E 0x00400630 /* IO CRB Entry B_E */ + +#define IIO_ICRBC_A 0x00400640 /* IO CRB Entry C_A */ +#define IIO_ICRBC_B 0x00400648 /* IO CRB Entry C_B */ +#define IIO_ICRBC_C 0x00400650 /* IO CRB Entry C_C */ +#define IIO_ICRBC_D 0x00400658 /* IO CRB Entry C_D */ +#define IIO_ICRBC_E 0x00400660 /* IO CRB Entry C_E */ + +#define IIO_ICRBD_A 0x00400670 /* IO CRB Entry D_A */ +#define IIO_ICRBD_B 0x00400678 /* IO CRB Entry D_B */ +#define IIO_ICRBD_C 0x00400680 /* IO CRB Entry D_C */ +#define IIO_ICRBD_D 0x00400688 /* IO CRB Entry D_D */ +#define IIO_ICRBD_E 0x00400690 /* IO CRB Entry D_E */ + +#define IIO_ICRBE_A 0x004006a0 /* IO CRB Entry E_A */ +#define IIO_ICRBE_B 0x004006a8 /* IO CRB Entry E_B */ +#define IIO_ICRBE_C 0x004006b0 /* IO CRB Entry E_C */ +#define IIO_ICRBE_D 0x004006b8 /* IO CRB Entry E_D */ +#define IIO_ICRBE_E 0x004006c0 /* IO CRB Entry E_E */ + +#define IIO_ICSML 0x00400700 /* IO CRB Spurious Message Low */ +#define IIO_ICSMM 0x00400708 /* IO CRB Spurious Message Middle */ +#define IIO_ICSMH 0x00400710 /* IO CRB Spurious Message High */ + +#define IIO_IDBSS 0x00400718 /* IO Debug Submenu Select */ + +#define IIO_IBLS0 0x00410000 /* IO BTE Length Status 0 */ +#define IIO_IBSA0 0x00410008 /* IO BTE Source Address 0 */ +#define IIO_IBDA0 0x00410010 /* IO BTE Destination Address 0 */ +#define IIO_IBCT0 0x00410018 /* IO BTE Control Terminate 0 */ +#define IIO_IBNA0 0x00410020 /* IO BTE Notification Address 0 */ +#define IIO_IBIA0 0x00410028 /* IO BTE Interrupt Address 0 */ +#define IIO_IBLS1 0x00420000 /* IO BTE Length Status 1 */ +#define IIO_IBSA1 0x00420008 /* IO BTE Source Address 1 */ +#define IIO_IBDA1 0x00420010 /* IO BTE Destination Address 1 */ +#define IIO_IBCT1 0x00420018 /* IO BTE Control Terminate 1 */ +#define IIO_IBNA1 0x00420020 /* IO BTE Notification Address 1 */ +#define IIO_IBIA1 0x00420028 /* IO BTE Interrupt Address 1 */ + +#define IIO_IPCR 0x00430000 /* IO Performance Control */ +#define IIO_IPPR 0x00430008 /* IO Performance Profiling */ + +/************************************************************************ + * * + * Description: This register echoes some information from the * + * LB_REV_ID register. It is available through Crosstalk as described * + * above. The REV_NUM and MFG_NUM fields receive their values from * + * the REVISION and MANUFACTURER fields in the LB_REV_ID register. * + * The PART_NUM field's value is the Crosstalk device ID number that * + * Steve Miller assigned to the SHub chip. * + * * + ************************************************************************/ + +typedef union ii_wid_u { + u64 ii_wid_regval; + struct { + u64 w_rsvd_1:1; + u64 w_mfg_num:11; + u64 w_part_num:16; + u64 w_rev_num:4; + u64 w_rsvd:32; + } ii_wid_fld_s; +} ii_wid_u_t; + +/************************************************************************ + * * + * The fields in this register are set upon detection of an error * + * and cleared by various mechanisms, as explained in the * + * description. * + * * + ************************************************************************/ + +typedef union ii_wstat_u { + u64 ii_wstat_regval; + struct { + u64 w_pending:4; + u64 w_xt_crd_to:1; + u64 w_xt_tail_to:1; + u64 w_rsvd_3:3; + u64 w_tx_mx_rty:1; + u64 w_rsvd_2:6; + u64 w_llp_tx_cnt:8; + u64 w_rsvd_1:8; + u64 w_crazy:1; + u64 w_rsvd:31; + } ii_wstat_fld_s; +} ii_wstat_u_t; + +/************************************************************************ + * * + * Description: This is a read-write enabled register. It controls * + * various aspects of the Crosstalk flow control. * + * * + ************************************************************************/ + +typedef union ii_wcr_u { + u64 ii_wcr_regval; + struct { + u64 w_wid:4; + u64 w_tag:1; + u64 w_rsvd_1:8; + u64 w_dst_crd:3; + u64 w_f_bad_pkt:1; + u64 w_dir_con:1; + u64 w_e_thresh:5; + u64 w_rsvd:41; + } ii_wcr_fld_s; +} ii_wcr_u_t; + +/************************************************************************ + * * + * Description: This register's value is a bit vector that guards * + * access to local registers within the II as well as to external * + * Crosstalk widgets. Each bit in the register corresponds to a * + * particular region in the system; a region consists of one, two or * + * four nodes (depending on the value of the REGION_SIZE field in the * + * LB_REV_ID register, which is documented in Section 8.3.1.1). The * + * protection provided by this register applies to PIO read * + * operations as well as PIO write operations. The II will perform a * + * PIO read or write request only if the bit for the requestor's * + * region is set; otherwise, the II will not perform the requested * + * operation and will return an error response. When a PIO read or * + * write request targets an external Crosstalk widget, then not only * + * must the bit for the requestor's region be set in the ILAPR, but * + * also the target widget's bit in the IOWA register must be set in * + * order for the II to perform the requested operation; otherwise, * + * the II will return an error response. Hence, the protection * + * provided by the IOWA register supplements the protection provided * + * by the ILAPR for requests that target external Crosstalk widgets. * + * This register itself can be accessed only by the nodes whose * + * region ID bits are enabled in this same register. It can also be * + * accessed through the IAlias space by the local processors. * + * The reset value of this register allows access by all nodes. * + * * + ************************************************************************/ + +typedef union ii_ilapr_u { + u64 ii_ilapr_regval; + struct { + u64 i_region:64; + } ii_ilapr_fld_s; +} ii_ilapr_u_t; + +/************************************************************************ + * * + * Description: A write to this register of the 64-bit value * + * "SGIrules" in ASCII, will cause the bit in the ILAPR register * + * corresponding to the region of the requestor to be set (allow * + * access). A write of any other value will be ignored. Access * + * protection for this register is "SGIrules". * + * This register can also be accessed through the IAlias space. * + * However, this access will not change the access permissions in the * + * ILAPR. * + * * + ************************************************************************/ + +typedef union ii_ilapo_u { + u64 ii_ilapo_regval; + struct { + u64 i_io_ovrride:64; + } ii_ilapo_fld_s; +} ii_ilapo_u_t; + +/************************************************************************ + * * + * This register qualifies all the PIO and Graphics writes launched * + * from the SHUB towards a widget. * + * * + ************************************************************************/ + +typedef union ii_iowa_u { + u64 ii_iowa_regval; + struct { + u64 i_w0_oac:1; + u64 i_rsvd_1:7; + u64 i_wx_oac:8; + u64 i_rsvd:48; + } ii_iowa_fld_s; +} ii_iowa_u_t; + +/************************************************************************ + * * + * Description: This register qualifies all the requests launched * + * from a widget towards the Shub. This register is intended to be * + * used by software in case of misbehaving widgets. * + * * + * * + ************************************************************************/ + +typedef union ii_iiwa_u { + u64 ii_iiwa_regval; + struct { + u64 i_w0_iac:1; + u64 i_rsvd_1:7; + u64 i_wx_iac:8; + u64 i_rsvd:48; + } ii_iiwa_fld_s; +} ii_iiwa_u_t; + +/************************************************************************ + * * + * Description: This register qualifies all the operations launched * + * from a widget towards the SHub. It allows individual access * + * control for up to 8 devices per widget. A device refers to * + * individual DMA master hosted by a widget. * + * The bits in each field of this register are cleared by the Shub * + * upon detection of an error which requires the device to be * + * disabled. These fields assume that 0=TNUM=7 (i.e., Bridge-centric * + * Crosstalk). Whether or not a device has access rights to this * + * Shub is determined by an AND of the device enable bit in the * + * appropriate field of this register and the corresponding bit in * + * the Wx_IAC field (for the widget which this device belongs to). * + * The bits in this field are set by writing a 1 to them. Incoming * + * replies from Crosstalk are not subject to this access control * + * mechanism. * + * * + ************************************************************************/ + +typedef union ii_iidem_u { + u64 ii_iidem_regval; + struct { + u64 i_w8_dxs:8; + u64 i_w9_dxs:8; + u64 i_wa_dxs:8; + u64 i_wb_dxs:8; + u64 i_wc_dxs:8; + u64 i_wd_dxs:8; + u64 i_we_dxs:8; + u64 i_wf_dxs:8; + } ii_iidem_fld_s; +} ii_iidem_u_t; + +/************************************************************************ + * * + * This register contains the various programmable fields necessary * + * for controlling and observing the LLP signals. * + * * + ************************************************************************/ + +typedef union ii_ilcsr_u { + u64 ii_ilcsr_regval; + struct { + u64 i_nullto:6; + u64 i_rsvd_4:2; + u64 i_wrmrst:1; + u64 i_rsvd_3:1; + u64 i_llp_en:1; + u64 i_bm8:1; + u64 i_llp_stat:2; + u64 i_remote_power:1; + u64 i_rsvd_2:1; + u64 i_maxrtry:10; + u64 i_d_avail_sel:2; + u64 i_rsvd_1:4; + u64 i_maxbrst:10; + u64 i_rsvd:22; + + } ii_ilcsr_fld_s; +} ii_ilcsr_u_t; + +/************************************************************************ + * * + * This is simply a status registers that monitors the LLP error * + * rate. * + * * + ************************************************************************/ + +typedef union ii_illr_u { + u64 ii_illr_regval; + struct { + u64 i_sn_cnt:16; + u64 i_cb_cnt:16; + u64 i_rsvd:32; + } ii_illr_fld_s; +} ii_illr_u_t; + +/************************************************************************ + * * + * Description: All II-detected non-BTE error interrupts are * + * specified via this register. * + * NOTE: The PI interrupt register address is hardcoded in the II. If * + * PI_ID==0, then the II sends an interrupt request (Duplonet PWRI * + * packet) to address offset 0x0180_0090 within the local register * + * address space of PI0 on the node specified by the NODE field. If * + * PI_ID==1, then the II sends the interrupt request to address * + * offset 0x01A0_0090 within the local register address space of PI1 * + * on the node specified by the NODE field. * + * * + ************************************************************************/ + +typedef union ii_iidsr_u { + u64 ii_iidsr_regval; + struct { + u64 i_level:8; + u64 i_pi_id:1; + u64 i_node:11; + u64 i_rsvd_3:4; + u64 i_enable:1; + u64 i_rsvd_2:3; + u64 i_int_sent:2; + u64 i_rsvd_1:2; + u64 i_pi0_forward_int:1; + u64 i_pi1_forward_int:1; + u64 i_rsvd:30; + } ii_iidsr_fld_s; +} ii_iidsr_u_t; + +/************************************************************************ + * * + * There are two instances of this register. This register is used * + * for matching up the incoming responses from the graphics widget to * + * the processor that initiated the graphics operation. The * + * write-responses are converted to graphics credits and returned to * + * the processor so that the processor interface can manage the flow * + * control. * + * * + ************************************************************************/ + +typedef union ii_igfx0_u { + u64 ii_igfx0_regval; + struct { + u64 i_w_num:4; + u64 i_pi_id:1; + u64 i_n_num:12; + u64 i_p_num:1; + u64 i_rsvd:46; + } ii_igfx0_fld_s; +} ii_igfx0_u_t; + +/************************************************************************ + * * + * There are two instances of this register. This register is used * + * for matching up the incoming responses from the graphics widget to * + * the processor that initiated the graphics operation. The * + * write-responses are converted to graphics credits and returned to * + * the processor so that the processor interface can manage the flow * + * control. * + * * + ************************************************************************/ + +typedef union ii_igfx1_u { + u64 ii_igfx1_regval; + struct { + u64 i_w_num:4; + u64 i_pi_id:1; + u64 i_n_num:12; + u64 i_p_num:1; + u64 i_rsvd:46; + } ii_igfx1_fld_s; +} ii_igfx1_u_t; + +/************************************************************************ + * * + * There are two instances of this registers. These registers are * + * used as scratch registers for software use. * + * * + ************************************************************************/ + +typedef union ii_iscr0_u { + u64 ii_iscr0_regval; + struct { + u64 i_scratch:64; + } ii_iscr0_fld_s; +} ii_iscr0_u_t; + +/************************************************************************ + * * + * There are two instances of this registers. These registers are * + * used as scratch registers for software use. * + * * + ************************************************************************/ + +typedef union ii_iscr1_u { + u64 ii_iscr1_regval; + struct { + u64 i_scratch:64; + } ii_iscr1_fld_s; +} ii_iscr1_u_t; + +/************************************************************************ + * * + * Description: There are seven instances of translation table entry * + * registers. Each register maps a Shub Big Window to a 48-bit * + * address on Crosstalk. * + * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * + * number) are used to select one of these 7 registers. The Widget * + * number field is then derived from the W_NUM field for synthesizing * + * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * + * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * + * are padded with zeros. Although the maximum Crosstalk space * + * addressable by the SHub is thus the lower 16 GBytes per widget * + * (M-mode), however only 7/32nds of this * + * space can be accessed. * + * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * + * Window number) are used to select one of these 7 registers. The * + * Widget number field is then derived from the W_NUM field for * + * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * + * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * + * field is used as Crosstalk[47], and remainder of the Crosstalk * + * address bits (Crosstalk[46:34]) are always zero. While the maximum * + * Crosstalk space addressable by the Shub is thus the lower * + * 8-GBytes per widget (N-mode), only 7/32nds * + * of this space can be accessed. * + * * + ************************************************************************/ + +typedef union ii_itte1_u { + u64 ii_itte1_regval; + struct { + u64 i_offset:5; + u64 i_rsvd_1:3; + u64 i_w_num:4; + u64 i_iosp:1; + u64 i_rsvd:51; + } ii_itte1_fld_s; +} ii_itte1_u_t; + +/************************************************************************ + * * + * Description: There are seven instances of translation table entry * + * registers. Each register maps a Shub Big Window to a 48-bit * + * address on Crosstalk. * + * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * + * number) are used to select one of these 7 registers. The Widget * + * number field is then derived from the W_NUM field for synthesizing * + * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * + * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * + * are padded with zeros. Although the maximum Crosstalk space * + * addressable by the Shub is thus the lower 16 GBytes per widget * + * (M-mode), however only 7/32nds of this * + * space can be accessed. * + * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * + * Window number) are used to select one of these 7 registers. The * + * Widget number field is then derived from the W_NUM field for * + * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * + * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * + * field is used as Crosstalk[47], and remainder of the Crosstalk * + * address bits (Crosstalk[46:34]) are always zero. While the maximum * + * Crosstalk space addressable by the Shub is thus the lower * + * 8-GBytes per widget (N-mode), only 7/32nds * + * of this space can be accessed. * + * * + ************************************************************************/ + +typedef union ii_itte2_u { + u64 ii_itte2_regval; + struct { + u64 i_offset:5; + u64 i_rsvd_1:3; + u64 i_w_num:4; + u64 i_iosp:1; + u64 i_rsvd:51; + } ii_itte2_fld_s; +} ii_itte2_u_t; + +/************************************************************************ + * * + * Description: There are seven instances of translation table entry * + * registers. Each register maps a Shub Big Window to a 48-bit * + * address on Crosstalk. * + * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * + * number) are used to select one of these 7 registers. The Widget * + * number field is then derived from the W_NUM field for synthesizing * + * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * + * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * + * are padded with zeros. Although the maximum Crosstalk space * + * addressable by the Shub is thus the lower 16 GBytes per widget * + * (M-mode), however only 7/32nds of this * + * space can be accessed. * + * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * + * Window number) are used to select one of these 7 registers. The * + * Widget number field is then derived from the W_NUM field for * + * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * + * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * + * field is used as Crosstalk[47], and remainder of the Crosstalk * + * address bits (Crosstalk[46:34]) are always zero. While the maximum * + * Crosstalk space addressable by the SHub is thus the lower * + * 8-GBytes per widget (N-mode), only 7/32nds * + * of this space can be accessed. * + * * + ************************************************************************/ + +typedef union ii_itte3_u { + u64 ii_itte3_regval; + struct { + u64 i_offset:5; + u64 i_rsvd_1:3; + u64 i_w_num:4; + u64 i_iosp:1; + u64 i_rsvd:51; + } ii_itte3_fld_s; +} ii_itte3_u_t; + +/************************************************************************ + * * + * Description: There are seven instances of translation table entry * + * registers. Each register maps a SHub Big Window to a 48-bit * + * address on Crosstalk. * + * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * + * number) are used to select one of these 7 registers. The Widget * + * number field is then derived from the W_NUM field for synthesizing * + * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * + * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * + * are padded with zeros. Although the maximum Crosstalk space * + * addressable by the SHub is thus the lower 16 GBytes per widget * + * (M-mode), however only 7/32nds of this * + * space can be accessed. * + * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * + * Window number) are used to select one of these 7 registers. The * + * Widget number field is then derived from the W_NUM field for * + * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * + * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * + * field is used as Crosstalk[47], and remainder of the Crosstalk * + * address bits (Crosstalk[46:34]) are always zero. While the maximum * + * Crosstalk space addressable by the SHub is thus the lower * + * 8-GBytes per widget (N-mode), only 7/32nds * + * of this space can be accessed. * + * * + ************************************************************************/ + +typedef union ii_itte4_u { + u64 ii_itte4_regval; + struct { + u64 i_offset:5; + u64 i_rsvd_1:3; + u64 i_w_num:4; + u64 i_iosp:1; + u64 i_rsvd:51; + } ii_itte4_fld_s; +} ii_itte4_u_t; + +/************************************************************************ + * * + * Description: There are seven instances of translation table entry * + * registers. Each register maps a SHub Big Window to a 48-bit * + * address on Crosstalk. * + * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * + * number) are used to select one of these 7 registers. The Widget * + * number field is then derived from the W_NUM field for synthesizing * + * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * + * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * + * are padded with zeros. Although the maximum Crosstalk space * + * addressable by the Shub is thus the lower 16 GBytes per widget * + * (M-mode), however only 7/32nds of this * + * space can be accessed. * + * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * + * Window number) are used to select one of these 7 registers. The * + * Widget number field is then derived from the W_NUM field for * + * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * + * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * + * field is used as Crosstalk[47], and remainder of the Crosstalk * + * address bits (Crosstalk[46:34]) are always zero. While the maximum * + * Crosstalk space addressable by the Shub is thus the lower * + * 8-GBytes per widget (N-mode), only 7/32nds * + * of this space can be accessed. * + * * + ************************************************************************/ + +typedef union ii_itte5_u { + u64 ii_itte5_regval; + struct { + u64 i_offset:5; + u64 i_rsvd_1:3; + u64 i_w_num:4; + u64 i_iosp:1; + u64 i_rsvd:51; + } ii_itte5_fld_s; +} ii_itte5_u_t; + +/************************************************************************ + * * + * Description: There are seven instances of translation table entry * + * registers. Each register maps a Shub Big Window to a 48-bit * + * address on Crosstalk. * + * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * + * number) are used to select one of these 7 registers. The Widget * + * number field is then derived from the W_NUM field for synthesizing * + * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * + * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * + * are padded with zeros. Although the maximum Crosstalk space * + * addressable by the Shub is thus the lower 16 GBytes per widget * + * (M-mode), however only 7/32nds of this * + * space can be accessed. * + * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * + * Window number) are used to select one of these 7 registers. The * + * Widget number field is then derived from the W_NUM field for * + * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * + * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * + * field is used as Crosstalk[47], and remainder of the Crosstalk * + * address bits (Crosstalk[46:34]) are always zero. While the maximum * + * Crosstalk space addressable by the Shub is thus the lower * + * 8-GBytes per widget (N-mode), only 7/32nds * + * of this space can be accessed. * + * * + ************************************************************************/ + +typedef union ii_itte6_u { + u64 ii_itte6_regval; + struct { + u64 i_offset:5; + u64 i_rsvd_1:3; + u64 i_w_num:4; + u64 i_iosp:1; + u64 i_rsvd:51; + } ii_itte6_fld_s; +} ii_itte6_u_t; + +/************************************************************************ + * * + * Description: There are seven instances of translation table entry * + * registers. Each register maps a Shub Big Window to a 48-bit * + * address on Crosstalk. * + * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * + * number) are used to select one of these 7 registers. The Widget * + * number field is then derived from the W_NUM field for synthesizing * + * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * + * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * + * are padded with zeros. Although the maximum Crosstalk space * + * addressable by the Shub is thus the lower 16 GBytes per widget * + * (M-mode), however only 7/32nds of this * + * space can be accessed. * + * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * + * Window number) are used to select one of these 7 registers. The * + * Widget number field is then derived from the W_NUM field for * + * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * + * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * + * field is used as Crosstalk[47], and remainder of the Crosstalk * + * address bits (Crosstalk[46:34]) are always zero. While the maximum * + * Crosstalk space addressable by the SHub is thus the lower * + * 8-GBytes per widget (N-mode), only 7/32nds * + * of this space can be accessed. * + * * + ************************************************************************/ + +typedef union ii_itte7_u { + u64 ii_itte7_regval; + struct { + u64 i_offset:5; + u64 i_rsvd_1:3; + u64 i_w_num:4; + u64 i_iosp:1; + u64 i_rsvd:51; + } ii_itte7_fld_s; +} ii_itte7_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprb0_u { + u64 ii_iprb0_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprb0_fld_s; +} ii_iprb0_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprb8_u { + u64 ii_iprb8_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprb8_fld_s; +} ii_iprb8_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprb9_u { + u64 ii_iprb9_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprb9_fld_s; +} ii_iprb9_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * * + * * + ************************************************************************/ + +typedef union ii_iprba_u { + u64 ii_iprba_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprba_fld_s; +} ii_iprba_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprbb_u { + u64 ii_iprbb_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprbb_fld_s; +} ii_iprbb_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprbc_u { + u64 ii_iprbc_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprbc_fld_s; +} ii_iprbc_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprbd_u { + u64 ii_iprbd_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprbd_fld_s; +} ii_iprbd_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of SHub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprbe_u { + u64 ii_iprbe_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprbe_fld_s; +} ii_iprbe_u_t; + +/************************************************************************ + * * + * Description: There are 9 instances of this register, one per * + * actual widget in this implementation of Shub and Crossbow. * + * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * + * refers to Crossbow's internal space. * + * This register contains the state elements per widget that are * + * necessary to manage the PIO flow control on Crosstalk and on the * + * Router Network. See the PIO Flow Control chapter for a complete * + * description of this register * + * The SPUR_WR bit requires some explanation. When this register is * + * written, the new value of the C field is captured in an internal * + * register so the hardware can remember what the programmer wrote * + * into the credit counter. The SPUR_WR bit sets whenever the C field * + * increments above this stored value, which indicates that there * + * have been more responses received than requests sent. The SPUR_WR * + * bit cannot be cleared until a value is written to the IPRBx * + * register; the write will correct the C field and capture its new * + * value in the internal register. Even if IECLR[E_PRB_x] is set, the * + * SPUR_WR bit will persist if IPRBx hasn't yet been written. * + * . * + * * + ************************************************************************/ + +typedef union ii_iprbf_u { + u64 ii_iprbf_regval; + struct { + u64 i_c:8; + u64 i_na:14; + u64 i_rsvd_2:2; + u64 i_nb:14; + u64 i_rsvd_1:2; + u64 i_m:2; + u64 i_f:1; + u64 i_of_cnt:5; + u64 i_error:1; + u64 i_rd_to:1; + u64 i_spur_wr:1; + u64 i_spur_rd:1; + u64 i_rsvd:11; + u64 i_mult_err:1; + } ii_iprbe_fld_s; +} ii_iprbf_u_t; + +/************************************************************************ + * * + * This register specifies the timeout value to use for monitoring * + * Crosstalk credits which are used outbound to Crosstalk. An * + * internal counter called the Crosstalk Credit Timeout Counter * + * increments every 128 II clocks. The counter starts counting * + * anytime the credit count drops below a threshold, and resets to * + * zero (stops counting) anytime the credit count is at or above the * + * threshold. The threshold is 1 credit in direct connect mode and 2 * + * in Crossbow connect mode. When the internal Crosstalk Credit * + * Timeout Counter reaches the value programmed in this register, a * + * Crosstalk Credit Timeout has occurred. The internal counter is not * + * readable from software, and stops counting at its maximum value, * + * so it cannot cause more than one interrupt. * + * * + ************************************************************************/ + +typedef union ii_ixcc_u { + u64 ii_ixcc_regval; + struct { + u64 i_time_out:26; + u64 i_rsvd:38; + } ii_ixcc_fld_s; +} ii_ixcc_u_t; + +/************************************************************************ + * * + * Description: This register qualifies all the PIO and DMA * + * operations launched from widget 0 towards the SHub. In * + * addition, it also qualifies accesses by the BTE streams. * + * The bits in each field of this register are cleared by the SHub * + * upon detection of an error which requires widget 0 or the BTE * + * streams to be terminated. Whether or not widget x has access * + * rights to this SHub is determined by an AND of the device * + * enable bit in the appropriate field of this register and bit 0 in * + * the Wx_IAC field. The bits in this field are set by writing a 1 to * + * them. Incoming replies from Crosstalk are not subject to this * + * access control mechanism. * + * * + ************************************************************************/ + +typedef union ii_imem_u { + u64 ii_imem_regval; + struct { + u64 i_w0_esd:1; + u64 i_rsvd_3:3; + u64 i_b0_esd:1; + u64 i_rsvd_2:3; + u64 i_b1_esd:1; + u64 i_rsvd_1:3; + u64 i_clr_precise:1; + u64 i_rsvd:51; + } ii_imem_fld_s; +} ii_imem_u_t; + +/************************************************************************ + * * + * Description: This register specifies the timeout value to use for * + * monitoring Crosstalk tail flits coming into the Shub in the * + * TAIL_TO field. An internal counter associated with this register * + * is incremented every 128 II internal clocks (7 bits). The counter * + * starts counting anytime a header micropacket is received and stops * + * counting (and resets to zero) any time a micropacket with a Tail * + * bit is received. Once the counter reaches the threshold value * + * programmed in this register, it generates an interrupt to the * + * processor that is programmed into the IIDSR. The counter saturates * + * (does not roll over) at its maximum value, so it cannot cause * + * another interrupt until after it is cleared. * + * The register also contains the Read Response Timeout values. The * + * Prescalar is 23 bits, and counts II clocks. An internal counter * + * increments on every II clock and when it reaches the value in the * + * Prescalar field, all IPRTE registers with their valid bits set * + * have their Read Response timers bumped. Whenever any of them match * + * the value in the RRSP_TO field, a Read Response Timeout has * + * occurred, and error handling occurs as described in the Error * + * Handling section of this document. * + * * + ************************************************************************/ + +typedef union ii_ixtt_u { + u64 ii_ixtt_regval; + struct { + u64 i_tail_to:26; + u64 i_rsvd_1:6; + u64 i_rrsp_ps:23; + u64 i_rrsp_to:5; + u64 i_rsvd:4; + } ii_ixtt_fld_s; +} ii_ixtt_u_t; + +/************************************************************************ + * * + * Writing a 1 to the fields of this register clears the appropriate * + * error bits in other areas of SHub. Note that when the * + * E_PRB_x bits are used to clear error bits in PRB registers, * + * SPUR_RD and SPUR_WR may persist, because they require additional * + * action to clear them. See the IPRBx and IXSS Register * + * specifications. * + * * + ************************************************************************/ + +typedef union ii_ieclr_u { + u64 ii_ieclr_regval; + struct { + u64 i_e_prb_0:1; + u64 i_rsvd:7; + u64 i_e_prb_8:1; + u64 i_e_prb_9:1; + u64 i_e_prb_a:1; + u64 i_e_prb_b:1; + u64 i_e_prb_c:1; + u64 i_e_prb_d:1; + u64 i_e_prb_e:1; + u64 i_e_prb_f:1; + u64 i_e_crazy:1; + u64 i_e_bte_0:1; + u64 i_e_bte_1:1; + u64 i_reserved_1:10; + u64 i_spur_rd_hdr:1; + u64 i_cam_intr_to:1; + u64 i_cam_overflow:1; + u64 i_cam_read_miss:1; + u64 i_ioq_rep_underflow:1; + u64 i_ioq_req_underflow:1; + u64 i_ioq_rep_overflow:1; + u64 i_ioq_req_overflow:1; + u64 i_iiq_rep_overflow:1; + u64 i_iiq_req_overflow:1; + u64 i_ii_xn_rep_cred_overflow:1; + u64 i_ii_xn_req_cred_overflow:1; + u64 i_ii_xn_invalid_cmd:1; + u64 i_xn_ii_invalid_cmd:1; + u64 i_reserved_2:21; + } ii_ieclr_fld_s; +} ii_ieclr_u_t; + +/************************************************************************ + * * + * This register controls both BTEs. SOFT_RESET is intended for * + * recovery after an error. COUNT controls the total number of CRBs * + * that both BTEs (combined) can use, which affects total BTE * + * bandwidth. * + * * + ************************************************************************/ + +typedef union ii_ibcr_u { + u64 ii_ibcr_regval; + struct { + u64 i_count:4; + u64 i_rsvd_1:4; + u64 i_soft_reset:1; + u64 i_rsvd:55; + } ii_ibcr_fld_s; +} ii_ibcr_u_t; + +/************************************************************************ + * * + * This register contains the header of a spurious read response * + * received from Crosstalk. A spurious read response is defined as a * + * read response received by II from a widget for which (1) the SIDN * + * has a value between 1 and 7, inclusive (II never sends requests to * + * these widgets (2) there is no valid IPRTE register which * + * corresponds to the TNUM, or (3) the widget indicated in SIDN is * + * not the same as the widget recorded in the IPRTE register * + * referenced by the TNUM. If this condition is true, and if the * + * IXSS[VALID] bit is clear, then the header of the spurious read * + * response is capture in IXSM and IXSS, and IXSS[VALID] is set. The * + * errant header is thereby captured, and no further spurious read * + * respones are captured until IXSS[VALID] is cleared by setting the * + * appropriate bit in IECLR.Everytime a spurious read response is * + * detected, the SPUR_RD bit of the PRB corresponding to the incoming * + * message's SIDN field is set. This always happens, regarless of * + * whether a header is captured. The programmer should check * + * IXSM[SIDN] to determine which widget sent the spurious response, * + * because there may be more than one SPUR_RD bit set in the PRB * + * registers. The widget indicated by IXSM[SIDN] was the first * + * spurious read response to be received since the last time * + * IXSS[VALID] was clear. The SPUR_RD bit of the corresponding PRB * + * will be set. Any SPUR_RD bits in any other PRB registers indicate * + * spurious messages from other widets which were detected after the * + * header was captured.. * + * * + ************************************************************************/ + +typedef union ii_ixsm_u { + u64 ii_ixsm_regval; + struct { + u64 i_byte_en:32; + u64 i_reserved:1; + u64 i_tag:3; + u64 i_alt_pactyp:4; + u64 i_bo:1; + u64 i_error:1; + u64 i_vbpm:1; + u64 i_gbr:1; + u64 i_ds:2; + u64 i_ct:1; + u64 i_tnum:5; + u64 i_pactyp:4; + u64 i_sidn:4; + u64 i_didn:4; + } ii_ixsm_fld_s; +} ii_ixsm_u_t; + +/************************************************************************ + * * + * This register contains the sideband bits of a spurious read * + * response received from Crosstalk. * + * * + ************************************************************************/ + +typedef union ii_ixss_u { + u64 ii_ixss_regval; + struct { + u64 i_sideband:8; + u64 i_rsvd:55; + u64 i_valid:1; + } ii_ixss_fld_s; +} ii_ixss_u_t; + +/************************************************************************ + * * + * This register enables software to access the II LLP's test port. * + * Refer to the LLP 2.5 documentation for an explanation of the test * + * port. Software can write to this register to program the values * + * for the control fields (TestErrCapture, TestClear, TestFlit, * + * TestMask and TestSeed). Similarly, software can read from this * + * register to obtain the values of the test port's status outputs * + * (TestCBerr, TestValid and TestData). * + * * + ************************************************************************/ + +typedef union ii_ilct_u { + u64 ii_ilct_regval; + struct { + u64 i_test_seed:20; + u64 i_test_mask:8; + u64 i_test_data:20; + u64 i_test_valid:1; + u64 i_test_cberr:1; + u64 i_test_flit:3; + u64 i_test_clear:1; + u64 i_test_err_capture:1; + u64 i_rsvd:9; + } ii_ilct_fld_s; +} ii_ilct_u_t; + +/************************************************************************ + * * + * If the II detects an illegal incoming Duplonet packet (request or * + * reply) when VALID==0 in the IIEPH1 register, then it saves the * + * contents of the packet's header flit in the IIEPH1 and IIEPH2 * + * registers, sets the VALID bit in IIEPH1, clears the OVERRUN bit, * + * and assigns a value to the ERR_TYPE field which indicates the * + * specific nature of the error. The II recognizes four different * + * types of errors: short request packets (ERR_TYPE==2), short reply * + * packets (ERR_TYPE==3), long request packets (ERR_TYPE==4) and long * + * reply packets (ERR_TYPE==5). The encodings for these types of * + * errors were chosen to be consistent with the same types of errors * + * indicated by the ERR_TYPE field in the LB_ERROR_HDR1 register (in * + * the LB unit). If the II detects an illegal incoming Duplonet * + * packet when VALID==1 in the IIEPH1 register, then it merely sets * + * the OVERRUN bit to indicate that a subsequent error has happened, * + * and does nothing further. * + * * + ************************************************************************/ + +typedef union ii_iieph1_u { + u64 ii_iieph1_regval; + struct { + u64 i_command:7; + u64 i_rsvd_5:1; + u64 i_suppl:14; + u64 i_rsvd_4:1; + u64 i_source:14; + u64 i_rsvd_3:1; + u64 i_err_type:4; + u64 i_rsvd_2:4; + u64 i_overrun:1; + u64 i_rsvd_1:3; + u64 i_valid:1; + u64 i_rsvd:13; + } ii_iieph1_fld_s; +} ii_iieph1_u_t; + +/************************************************************************ + * * + * This register holds the Address field from the header flit of an * + * incoming erroneous Duplonet packet, along with the tail bit which * + * accompanied this header flit. This register is essentially an * + * extension of IIEPH1. Two registers were necessary because the 64 * + * bits available in only a single register were insufficient to * + * capture the entire header flit of an erroneous packet. * + * * + ************************************************************************/ + +typedef union ii_iieph2_u { + u64 ii_iieph2_regval; + struct { + u64 i_rsvd_0:3; + u64 i_address:47; + u64 i_rsvd_1:10; + u64 i_tail:1; + u64 i_rsvd:3; + } ii_iieph2_fld_s; +} ii_iieph2_u_t; + +/******************************/ + +/************************************************************************ + * * + * This register's value is a bit vector that guards access from SXBs * + * to local registers within the II as well as to external Crosstalk * + * widgets * + * * + ************************************************************************/ + +typedef union ii_islapr_u { + u64 ii_islapr_regval; + struct { + u64 i_region:64; + } ii_islapr_fld_s; +} ii_islapr_u_t; + +/************************************************************************ + * * + * A write to this register of the 56-bit value "Pup+Bun" will cause * + * the bit in the ISLAPR register corresponding to the region of the * + * requestor to be set (access allowed). ( + * * + ************************************************************************/ + +typedef union ii_islapo_u { + u64 ii_islapo_regval; + struct { + u64 i_io_sbx_ovrride:56; + u64 i_rsvd:8; + } ii_islapo_fld_s; +} ii_islapo_u_t; + +/************************************************************************ + * * + * Determines how long the wrapper will wait aftr an interrupt is * + * initially issued from the II before it times out the outstanding * + * interrupt and drops it from the interrupt queue. * + * * + ************************************************************************/ + +typedef union ii_iwi_u { + u64 ii_iwi_regval; + struct { + u64 i_prescale:24; + u64 i_rsvd:8; + u64 i_timeout:8; + u64 i_rsvd1:8; + u64 i_intrpt_retry_period:8; + u64 i_rsvd2:8; + } ii_iwi_fld_s; +} ii_iwi_u_t; + +/************************************************************************ + * * + * Log errors which have occurred in the II wrapper. The errors are * + * cleared by writing to the IECLR register. * + * * + ************************************************************************/ + +typedef union ii_iwel_u { + u64 ii_iwel_regval; + struct { + u64 i_intr_timed_out:1; + u64 i_rsvd:7; + u64 i_cam_overflow:1; + u64 i_cam_read_miss:1; + u64 i_rsvd1:2; + u64 i_ioq_rep_underflow:1; + u64 i_ioq_req_underflow:1; + u64 i_ioq_rep_overflow:1; + u64 i_ioq_req_overflow:1; + u64 i_iiq_rep_overflow:1; + u64 i_iiq_req_overflow:1; + u64 i_rsvd2:6; + u64 i_ii_xn_rep_cred_over_under:1; + u64 i_ii_xn_req_cred_over_under:1; + u64 i_rsvd3:6; + u64 i_ii_xn_invalid_cmd:1; + u64 i_xn_ii_invalid_cmd:1; + u64 i_rsvd4:30; + } ii_iwel_fld_s; +} ii_iwel_u_t; + +/************************************************************************ + * * + * Controls the II wrapper. * + * * + ************************************************************************/ + +typedef union ii_iwc_u { + u64 ii_iwc_regval; + struct { + u64 i_dma_byte_swap:1; + u64 i_rsvd:3; + u64 i_cam_read_lines_reset:1; + u64 i_rsvd1:3; + u64 i_ii_xn_cred_over_under_log:1; + u64 i_rsvd2:19; + u64 i_xn_rep_iq_depth:5; + u64 i_rsvd3:3; + u64 i_xn_req_iq_depth:5; + u64 i_rsvd4:3; + u64 i_iiq_depth:6; + u64 i_rsvd5:12; + u64 i_force_rep_cred:1; + u64 i_force_req_cred:1; + } ii_iwc_fld_s; +} ii_iwc_u_t; + +/************************************************************************ + * * + * Status in the II wrapper. * + * * + ************************************************************************/ + +typedef union ii_iws_u { + u64 ii_iws_regval; + struct { + u64 i_xn_rep_iq_credits:5; + u64 i_rsvd:3; + u64 i_xn_req_iq_credits:5; + u64 i_rsvd1:51; + } ii_iws_fld_s; +} ii_iws_u_t; + +/************************************************************************ + * * + * Masks errors in the IWEL register. * + * * + ************************************************************************/ + +typedef union ii_iweim_u { + u64 ii_iweim_regval; + struct { + u64 i_intr_timed_out:1; + u64 i_rsvd:7; + u64 i_cam_overflow:1; + u64 i_cam_read_miss:1; + u64 i_rsvd1:2; + u64 i_ioq_rep_underflow:1; + u64 i_ioq_req_underflow:1; + u64 i_ioq_rep_overflow:1; + u64 i_ioq_req_overflow:1; + u64 i_iiq_rep_overflow:1; + u64 i_iiq_req_overflow:1; + u64 i_rsvd2:6; + u64 i_ii_xn_rep_cred_overflow:1; + u64 i_ii_xn_req_cred_overflow:1; + u64 i_rsvd3:6; + u64 i_ii_xn_invalid_cmd:1; + u64 i_xn_ii_invalid_cmd:1; + u64 i_rsvd4:30; + } ii_iweim_fld_s; +} ii_iweim_u_t; + +/************************************************************************ + * * + * A write to this register causes a particular field in the * + * corresponding widget's PRB entry to be adjusted up or down by 1. * + * This counter should be used when recovering from error and reset * + * conditions. Note that software would be capable of causing * + * inadvertent overflow or underflow of these counters. * + * * + ************************************************************************/ + +typedef union ii_ipca_u { + u64 ii_ipca_regval; + struct { + u64 i_wid:4; + u64 i_adjust:1; + u64 i_rsvd_1:3; + u64 i_field:2; + u64 i_rsvd:54; + } ii_ipca_fld_s; +} ii_ipca_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte0a_u { + u64 ii_iprte0a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprte0a_fld_s; +} ii_iprte0a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte1a_u { + u64 ii_iprte1a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprte1a_fld_s; +} ii_iprte1a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte2a_u { + u64 ii_iprte2a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprte2a_fld_s; +} ii_iprte2a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte3a_u { + u64 ii_iprte3a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprte3a_fld_s; +} ii_iprte3a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte4a_u { + u64 ii_iprte4a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprte4a_fld_s; +} ii_iprte4a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte5a_u { + u64 ii_iprte5a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprte5a_fld_s; +} ii_iprte5a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte6a_u { + u64 ii_iprte6a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprte6a_fld_s; +} ii_iprte6a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte7a_u { + u64 ii_iprte7a_regval; + struct { + u64 i_rsvd_1:54; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } ii_iprtea7_fld_s; +} ii_iprte7a_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte0b_u { + u64 ii_iprte0b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + } ii_iprte0b_fld_s; +} ii_iprte0b_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte1b_u { + u64 ii_iprte1b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + } ii_iprte1b_fld_s; +} ii_iprte1b_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte2b_u { + u64 ii_iprte2b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + } ii_iprte2b_fld_s; +} ii_iprte2b_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte3b_u { + u64 ii_iprte3b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + } ii_iprte3b_fld_s; +} ii_iprte3b_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte4b_u { + u64 ii_iprte4b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + } ii_iprte4b_fld_s; +} ii_iprte4b_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte5b_u { + u64 ii_iprte5b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + } ii_iprte5b_fld_s; +} ii_iprte5b_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte6b_u { + u64 ii_iprte6b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + + } ii_iprte6b_fld_s; +} ii_iprte6b_u_t; + +/************************************************************************ + * * + * There are 8 instances of this register. This register contains * + * the information that the II has to remember once it has launched a * + * PIO Read operation. The contents are used to form the correct * + * Router Network packet and direct the Crosstalk reply to the * + * appropriate processor. * + * * + ************************************************************************/ + +typedef union ii_iprte7b_u { + u64 ii_iprte7b_regval; + struct { + u64 i_rsvd_1:3; + u64 i_address:47; + u64 i_init:3; + u64 i_source:11; + } ii_iprte7b_fld_s; +} ii_iprte7b_u_t; + +/************************************************************************ + * * + * Description: SHub II contains a feature which did not exist in * + * the Hub which automatically cleans up after a Read Response * + * timeout, including deallocation of the IPRTE and recovery of IBuf * + * space. The inclusion of this register in SHub is for backward * + * compatibility * + * A write to this register causes an entry from the table of * + * outstanding PIO Read Requests to be freed and returned to the * + * stack of free entries. This register is used in handling the * + * timeout errors that result in a PIO Reply never returning from * + * Crosstalk. * + * Note that this register does not affect the contents of the IPRTE * + * registers. The Valid bits in those registers have to be * + * specifically turned off by software. * + * * + ************************************************************************/ + +typedef union ii_ipdr_u { + u64 ii_ipdr_regval; + struct { + u64 i_te:3; + u64 i_rsvd_1:1; + u64 i_pnd:1; + u64 i_init_rpcnt:1; + u64 i_rsvd:58; + } ii_ipdr_fld_s; +} ii_ipdr_u_t; + +/************************************************************************ + * * + * A write to this register causes a CRB entry to be returned to the * + * queue of free CRBs. The entry should have previously been cleared * + * (mark bit) via backdoor access to the pertinent CRB entry. This * + * register is used in the last step of handling the errors that are * + * captured and marked in CRB entries. Briefly: 1) first error for * + * DMA write from a particular device, and first error for a * + * particular BTE stream, lead to a marked CRB entry, and processor * + * interrupt, 2) software reads the error information captured in the * + * CRB entry, and presumably takes some corrective action, 3) * + * software clears the mark bit, and finally 4) software writes to * + * the ICDR register to return the CRB entry to the list of free CRB * + * entries. * + * * + ************************************************************************/ + +typedef union ii_icdr_u { + u64 ii_icdr_regval; + struct { + u64 i_crb_num:4; + u64 i_pnd:1; + u64 i_rsvd:59; + } ii_icdr_fld_s; +} ii_icdr_u_t; + +/************************************************************************ + * * + * This register provides debug access to two FIFOs inside of II. * + * Both IOQ_MAX* fields of this register contain the instantaneous * + * depth (in units of the number of available entries) of the * + * associated IOQ FIFO. A read of this register will return the * + * number of free entries on each FIFO at the time of the read. So * + * when a FIFO is idle, the associated field contains the maximum * + * depth of the FIFO. This register is writable for debug reasons * + * and is intended to be written with the maximum desired FIFO depth * + * while the FIFO is idle. Software must assure that II is idle when * + * this register is written. If there are any active entries in any * + * of these FIFOs when this register is written, the results are * + * undefined. * + * * + ************************************************************************/ + +typedef union ii_ifdr_u { + u64 ii_ifdr_regval; + struct { + u64 i_ioq_max_rq:7; + u64 i_set_ioq_rq:1; + u64 i_ioq_max_rp:7; + u64 i_set_ioq_rp:1; + u64 i_rsvd:48; + } ii_ifdr_fld_s; +} ii_ifdr_u_t; + +/************************************************************************ + * * + * This register allows the II to become sluggish in removing * + * messages from its inbound queue (IIQ). This will cause messages to * + * back up in either virtual channel. Disabling the "molasses" mode * + * subsequently allows the II to be tested under stress. In the * + * sluggish ("Molasses") mode, the localized effects of congestion * + * can be observed. * + * * + ************************************************************************/ + +typedef union ii_iiap_u { + u64 ii_iiap_regval; + struct { + u64 i_rq_mls:6; + u64 i_rsvd_1:2; + u64 i_rp_mls:6; + u64 i_rsvd:50; + } ii_iiap_fld_s; +} ii_iiap_u_t; + +/************************************************************************ + * * + * This register allows several parameters of CRB operation to be * + * set. Note that writing to this register can have catastrophic side * + * effects, if the CRB is not quiescent, i.e. if the CRB is * + * processing protocol messages when the write occurs. * + * * + ************************************************************************/ + +typedef union ii_icmr_u { + u64 ii_icmr_regval; + struct { + u64 i_sp_msg:1; + u64 i_rd_hdr:1; + u64 i_rsvd_4:2; + u64 i_c_cnt:4; + u64 i_rsvd_3:4; + u64 i_clr_rqpd:1; + u64 i_clr_rppd:1; + u64 i_rsvd_2:2; + u64 i_fc_cnt:4; + u64 i_crb_vld:15; + u64 i_crb_mark:15; + u64 i_rsvd_1:2; + u64 i_precise:1; + u64 i_rsvd:11; + } ii_icmr_fld_s; +} ii_icmr_u_t; + +/************************************************************************ + * * + * This register allows control of the table portion of the CRB * + * logic via software. Control operations from this register have * + * priority over all incoming Crosstalk or BTE requests. * + * * + ************************************************************************/ + +typedef union ii_iccr_u { + u64 ii_iccr_regval; + struct { + u64 i_crb_num:4; + u64 i_rsvd_1:4; + u64 i_cmd:8; + u64 i_pending:1; + u64 i_rsvd:47; + } ii_iccr_fld_s; +} ii_iccr_u_t; + +/************************************************************************ + * * + * This register allows the maximum timeout value to be programmed. * + * * + ************************************************************************/ + +typedef union ii_icto_u { + u64 ii_icto_regval; + struct { + u64 i_timeout:8; + u64 i_rsvd:56; + } ii_icto_fld_s; +} ii_icto_u_t; + +/************************************************************************ + * * + * This register allows the timeout prescalar to be programmed. An * + * internal counter is associated with this register. When the * + * internal counter reaches the value of the PRESCALE field, the * + * timer registers in all valid CRBs are incremented (CRBx_D[TIMEOUT] * + * field). The internal counter resets to zero, and then continues * + * counting. * + * * + ************************************************************************/ + +typedef union ii_ictp_u { + u64 ii_ictp_regval; + struct { + u64 i_prescale:24; + u64 i_rsvd:40; + } ii_ictp_fld_s; +} ii_ictp_u_t; + +/************************************************************************ + * * + * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * + * used for Crosstalk operations (both cacheline and partial * + * operations) or BTE/IO. Because the CRB entries are very wide, five * + * registers (_A to _E) are required to read and write each entry. * + * The CRB Entry registers can be conceptualized as rows and columns * + * (illustrated in the table above). Each row contains the 4 * + * registers required for a single CRB Entry. The first doubleword * + * (column) for each entry is labeled A, and the second doubleword * + * (higher address) is labeled B, the third doubleword is labeled C, * + * the fourth doubleword is labeled D and the fifth doubleword is * + * labeled E. All CRB entries have their addresses on a quarter * + * cacheline aligned boundary. * + * Upon reset, only the following fields are initialized: valid * + * (VLD), priority count, timeout, timeout valid, and context valid. * + * All other bits should be cleared by software before use (after * + * recovering any potential error state from before the reset). * + * The following four tables summarize the format for the four * + * registers that are used for each ICRB# Entry. * + * * + ************************************************************************/ + +typedef union ii_icrb0_a_u { + u64 ii_icrb0_a_regval; + struct { + u64 ia_iow:1; + u64 ia_vld:1; + u64 ia_addr:47; + u64 ia_tnum:5; + u64 ia_sidn:4; + u64 ia_rsvd:6; + } ii_icrb0_a_fld_s; +} ii_icrb0_a_u_t; + +/************************************************************************ + * * + * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * + * used for Crosstalk operations (both cacheline and partial * + * operations) or BTE/IO. Because the CRB entries are very wide, five * + * registers (_A to _E) are required to read and write each entry. * + * * + ************************************************************************/ + +typedef union ii_icrb0_b_u { + u64 ii_icrb0_b_regval; + struct { + u64 ib_xt_err:1; + u64 ib_mark:1; + u64 ib_ln_uce:1; + u64 ib_errcode:3; + u64 ib_error:1; + u64 ib_stall__bte_1:1; + u64 ib_stall__bte_0:1; + u64 ib_stall__intr:1; + u64 ib_stall_ib:1; + u64 ib_intvn:1; + u64 ib_wb:1; + u64 ib_hold:1; + u64 ib_ack:1; + u64 ib_resp:1; + u64 ib_ack_cnt:11; + u64 ib_rsvd:7; + u64 ib_exc:5; + u64 ib_init:3; + u64 ib_imsg:8; + u64 ib_imsgtype:2; + u64 ib_use_old:1; + u64 ib_rsvd_1:11; + } ii_icrb0_b_fld_s; +} ii_icrb0_b_u_t; + +/************************************************************************ + * * + * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * + * used for Crosstalk operations (both cacheline and partial * + * operations) or BTE/IO. Because the CRB entries are very wide, five * + * registers (_A to _E) are required to read and write each entry. * + * * + ************************************************************************/ + +typedef union ii_icrb0_c_u { + u64 ii_icrb0_c_regval; + struct { + u64 ic_source:15; + u64 ic_size:2; + u64 ic_ct:1; + u64 ic_bte_num:1; + u64 ic_gbr:1; + u64 ic_resprqd:1; + u64 ic_bo:1; + u64 ic_suppl:15; + u64 ic_rsvd:27; + } ii_icrb0_c_fld_s; +} ii_icrb0_c_u_t; + +/************************************************************************ + * * + * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * + * used for Crosstalk operations (both cacheline and partial * + * operations) or BTE/IO. Because the CRB entries are very wide, five * + * registers (_A to _E) are required to read and write each entry. * + * * + ************************************************************************/ + +typedef union ii_icrb0_d_u { + u64 ii_icrb0_d_regval; + struct { + u64 id_pa_be:43; + u64 id_bte_op:1; + u64 id_pr_psc:4; + u64 id_pr_cnt:4; + u64 id_sleep:1; + u64 id_rsvd:11; + } ii_icrb0_d_fld_s; +} ii_icrb0_d_u_t; + +/************************************************************************ + * * + * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * + * used for Crosstalk operations (both cacheline and partial * + * operations) or BTE/IO. Because the CRB entries are very wide, five * + * registers (_A to _E) are required to read and write each entry. * + * * + ************************************************************************/ + +typedef union ii_icrb0_e_u { + u64 ii_icrb0_e_regval; + struct { + u64 ie_timeout:8; + u64 ie_context:15; + u64 ie_rsvd:1; + u64 ie_tvld:1; + u64 ie_cvld:1; + u64 ie_rsvd_0:38; + } ii_icrb0_e_fld_s; +} ii_icrb0_e_u_t; + +/************************************************************************ + * * + * This register contains the lower 64 bits of the header of the * + * spurious message captured by II. Valid when the SP_MSG bit in ICMR * + * register is set. * + * * + ************************************************************************/ + +typedef union ii_icsml_u { + u64 ii_icsml_regval; + struct { + u64 i_tt_addr:47; + u64 i_newsuppl_ex:14; + u64 i_reserved:2; + u64 i_overflow:1; + } ii_icsml_fld_s; +} ii_icsml_u_t; + +/************************************************************************ + * * + * This register contains the middle 64 bits of the header of the * + * spurious message captured by II. Valid when the SP_MSG bit in ICMR * + * register is set. * + * * + ************************************************************************/ + +typedef union ii_icsmm_u { + u64 ii_icsmm_regval; + struct { + u64 i_tt_ack_cnt:11; + u64 i_reserved:53; + } ii_icsmm_fld_s; +} ii_icsmm_u_t; + +/************************************************************************ + * * + * This register contains the microscopic state, all the inputs to * + * the protocol table, captured with the spurious message. Valid when * + * the SP_MSG bit in the ICMR register is set. * + * * + ************************************************************************/ + +typedef union ii_icsmh_u { + u64 ii_icsmh_regval; + struct { + u64 i_tt_vld:1; + u64 i_xerr:1; + u64 i_ft_cwact_o:1; + u64 i_ft_wact_o:1; + u64 i_ft_active_o:1; + u64 i_sync:1; + u64 i_mnusg:1; + u64 i_mnusz:1; + u64 i_plusz:1; + u64 i_plusg:1; + u64 i_tt_exc:5; + u64 i_tt_wb:1; + u64 i_tt_hold:1; + u64 i_tt_ack:1; + u64 i_tt_resp:1; + u64 i_tt_intvn:1; + u64 i_g_stall_bte1:1; + u64 i_g_stall_bte0:1; + u64 i_g_stall_il:1; + u64 i_g_stall_ib:1; + u64 i_tt_imsg:8; + u64 i_tt_imsgtype:2; + u64 i_tt_use_old:1; + u64 i_tt_respreqd:1; + u64 i_tt_bte_num:1; + u64 i_cbn:1; + u64 i_match:1; + u64 i_rpcnt_lt_34:1; + u64 i_rpcnt_ge_34:1; + u64 i_rpcnt_lt_18:1; + u64 i_rpcnt_ge_18:1; + u64 i_rpcnt_lt_2:1; + u64 i_rpcnt_ge_2:1; + u64 i_rqcnt_lt_18:1; + u64 i_rqcnt_ge_18:1; + u64 i_rqcnt_lt_2:1; + u64 i_rqcnt_ge_2:1; + u64 i_tt_device:7; + u64 i_tt_init:3; + u64 i_reserved:5; + } ii_icsmh_fld_s; +} ii_icsmh_u_t; + +/************************************************************************ + * * + * The Shub DEBUG unit provides a 3-bit selection signal to the * + * II core and a 3-bit selection signal to the fsbclk domain in the II * + * wrapper. * + * * + ************************************************************************/ + +typedef union ii_idbss_u { + u64 ii_idbss_regval; + struct { + u64 i_iioclk_core_submenu:3; + u64 i_rsvd:5; + u64 i_fsbclk_wrapper_submenu:3; + u64 i_rsvd_1:5; + u64 i_iioclk_menu:5; + u64 i_rsvd_2:43; + } ii_idbss_fld_s; +} ii_idbss_u_t; + +/************************************************************************ + * * + * Description: This register is used to set up the length for a * + * transfer and then to monitor the progress of that transfer. This * + * register needs to be initialized before a transfer is started. A * + * legitimate write to this register will set the Busy bit, clear the * + * Error bit, and initialize the length to the value desired. * + * While the transfer is in progress, hardware will decrement the * + * length field with each successful block that is copied. Once the * + * transfer completes, hardware will clear the Busy bit. The length * + * field will also contain the number of cache lines left to be * + * transferred. * + * * + ************************************************************************/ + +typedef union ii_ibls0_u { + u64 ii_ibls0_regval; + struct { + u64 i_length:16; + u64 i_error:1; + u64 i_rsvd_1:3; + u64 i_busy:1; + u64 i_rsvd:43; + } ii_ibls0_fld_s; +} ii_ibls0_u_t; + +/************************************************************************ + * * + * This register should be loaded before a transfer is started. The * + * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * + * address as described in Section 1.3, Figure2 and Figure3. Since * + * the bottom 7 bits of the address are always taken to be zero, BTE * + * transfers are always cacheline-aligned. * + * * + ************************************************************************/ + +typedef union ii_ibsa0_u { + u64 ii_ibsa0_regval; + struct { + u64 i_rsvd_1:7; + u64 i_addr:42; + u64 i_rsvd:15; + } ii_ibsa0_fld_s; +} ii_ibsa0_u_t; + +/************************************************************************ + * * + * This register should be loaded before a transfer is started. The * + * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * + * address as described in Section 1.3, Figure2 and Figure3. Since * + * the bottom 7 bits of the address are always taken to be zero, BTE * + * transfers are always cacheline-aligned. * + * * + ************************************************************************/ + +typedef union ii_ibda0_u { + u64 ii_ibda0_regval; + struct { + u64 i_rsvd_1:7; + u64 i_addr:42; + u64 i_rsvd:15; + } ii_ibda0_fld_s; +} ii_ibda0_u_t; + +/************************************************************************ + * * + * Writing to this register sets up the attributes of the transfer * + * and initiates the transfer operation. Reading this register has * + * the side effect of terminating any transfer in progress. Note: * + * stopping a transfer midstream could have an adverse impact on the * + * other BTE. If a BTE stream has to be stopped (due to error * + * handling for example), both BTE streams should be stopped and * + * their transfers discarded. * + * * + ************************************************************************/ + +typedef union ii_ibct0_u { + u64 ii_ibct0_regval; + struct { + u64 i_zerofill:1; + u64 i_rsvd_2:3; + u64 i_notify:1; + u64 i_rsvd_1:3; + u64 i_poison:1; + u64 i_rsvd:55; + } ii_ibct0_fld_s; +} ii_ibct0_u_t; + +/************************************************************************ + * * + * This register contains the address to which the WINV is sent. * + * This address has to be cache line aligned. * + * * + ************************************************************************/ + +typedef union ii_ibna0_u { + u64 ii_ibna0_regval; + struct { + u64 i_rsvd_1:7; + u64 i_addr:42; + u64 i_rsvd:15; + } ii_ibna0_fld_s; +} ii_ibna0_u_t; + +/************************************************************************ + * * + * This register contains the programmable level as well as the node * + * ID and PI unit of the processor to which the interrupt will be * + * sent. * + * * + ************************************************************************/ + +typedef union ii_ibia0_u { + u64 ii_ibia0_regval; + struct { + u64 i_rsvd_2:1; + u64 i_node_id:11; + u64 i_rsvd_1:4; + u64 i_level:7; + u64 i_rsvd:41; + } ii_ibia0_fld_s; +} ii_ibia0_u_t; + +/************************************************************************ + * * + * Description: This register is used to set up the length for a * + * transfer and then to monitor the progress of that transfer. This * + * register needs to be initialized before a transfer is started. A * + * legitimate write to this register will set the Busy bit, clear the * + * Error bit, and initialize the length to the value desired. * + * While the transfer is in progress, hardware will decrement the * + * length field with each successful block that is copied. Once the * + * transfer completes, hardware will clear the Busy bit. The length * + * field will also contain the number of cache lines left to be * + * transferred. * + * * + ************************************************************************/ + +typedef union ii_ibls1_u { + u64 ii_ibls1_regval; + struct { + u64 i_length:16; + u64 i_error:1; + u64 i_rsvd_1:3; + u64 i_busy:1; + u64 i_rsvd:43; + } ii_ibls1_fld_s; +} ii_ibls1_u_t; + +/************************************************************************ + * * + * This register should be loaded before a transfer is started. The * + * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * + * address as described in Section 1.3, Figure2 and Figure3. Since * + * the bottom 7 bits of the address are always taken to be zero, BTE * + * transfers are always cacheline-aligned. * + * * + ************************************************************************/ + +typedef union ii_ibsa1_u { + u64 ii_ibsa1_regval; + struct { + u64 i_rsvd_1:7; + u64 i_addr:33; + u64 i_rsvd:24; + } ii_ibsa1_fld_s; +} ii_ibsa1_u_t; + +/************************************************************************ + * * + * This register should be loaded before a transfer is started. The * + * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * + * address as described in Section 1.3, Figure2 and Figure3. Since * + * the bottom 7 bits of the address are always taken to be zero, BTE * + * transfers are always cacheline-aligned. * + * * + ************************************************************************/ + +typedef union ii_ibda1_u { + u64 ii_ibda1_regval; + struct { + u64 i_rsvd_1:7; + u64 i_addr:33; + u64 i_rsvd:24; + } ii_ibda1_fld_s; +} ii_ibda1_u_t; + +/************************************************************************ + * * + * Writing to this register sets up the attributes of the transfer * + * and initiates the transfer operation. Reading this register has * + * the side effect of terminating any transfer in progress. Note: * + * stopping a transfer midstream could have an adverse impact on the * + * other BTE. If a BTE stream has to be stopped (due to error * + * handling for example), both BTE streams should be stopped and * + * their transfers discarded. * + * * + ************************************************************************/ + +typedef union ii_ibct1_u { + u64 ii_ibct1_regval; + struct { + u64 i_zerofill:1; + u64 i_rsvd_2:3; + u64 i_notify:1; + u64 i_rsvd_1:3; + u64 i_poison:1; + u64 i_rsvd:55; + } ii_ibct1_fld_s; +} ii_ibct1_u_t; + +/************************************************************************ + * * + * This register contains the address to which the WINV is sent. * + * This address has to be cache line aligned. * + * * + ************************************************************************/ + +typedef union ii_ibna1_u { + u64 ii_ibna1_regval; + struct { + u64 i_rsvd_1:7; + u64 i_addr:33; + u64 i_rsvd:24; + } ii_ibna1_fld_s; +} ii_ibna1_u_t; + +/************************************************************************ + * * + * This register contains the programmable level as well as the node * + * ID and PI unit of the processor to which the interrupt will be * + * sent. * + * * + ************************************************************************/ + +typedef union ii_ibia1_u { + u64 ii_ibia1_regval; + struct { + u64 i_pi_id:1; + u64 i_node_id:8; + u64 i_rsvd_1:7; + u64 i_level:7; + u64 i_rsvd:41; + } ii_ibia1_fld_s; +} ii_ibia1_u_t; + +/************************************************************************ + * * + * This register defines the resources that feed information into * + * the two performance counters located in the IO Performance * + * Profiling Register. There are 17 different quantities that can be * + * measured. Given these 17 different options, the two performance * + * counters have 15 of them in common; menu selections 0 through 0xE * + * are identical for each performance counter. As for the other two * + * options, one is available from one performance counter and the * + * other is available from the other performance counter. Hence, the * + * II supports all 17*16=272 possible combinations of quantities to * + * measure. * + * * + ************************************************************************/ + +typedef union ii_ipcr_u { + u64 ii_ipcr_regval; + struct { + u64 i_ippr0_c:4; + u64 i_ippr1_c:4; + u64 i_icct:8; + u64 i_rsvd:48; + } ii_ipcr_fld_s; +} ii_ipcr_u_t; + +/************************************************************************ + * * + * * + * * + ************************************************************************/ + +typedef union ii_ippr_u { + u64 ii_ippr_regval; + struct { + u64 i_ippr0:32; + u64 i_ippr1:32; + } ii_ippr_fld_s; +} ii_ippr_u_t; + +/************************************************************************ + * * + * The following defines which were not formed into structures are * + * probably indentical to another register, and the name of the * + * register is provided against each of these registers. This * + * information needs to be checked carefully * + * * + * IIO_ICRB1_A IIO_ICRB0_A * + * IIO_ICRB1_B IIO_ICRB0_B * + * IIO_ICRB1_C IIO_ICRB0_C * + * IIO_ICRB1_D IIO_ICRB0_D * + * IIO_ICRB1_E IIO_ICRB0_E * + * IIO_ICRB2_A IIO_ICRB0_A * + * IIO_ICRB2_B IIO_ICRB0_B * + * IIO_ICRB2_C IIO_ICRB0_C * + * IIO_ICRB2_D IIO_ICRB0_D * + * IIO_ICRB2_E IIO_ICRB0_E * + * IIO_ICRB3_A IIO_ICRB0_A * + * IIO_ICRB3_B IIO_ICRB0_B * + * IIO_ICRB3_C IIO_ICRB0_C * + * IIO_ICRB3_D IIO_ICRB0_D * + * IIO_ICRB3_E IIO_ICRB0_E * + * IIO_ICRB4_A IIO_ICRB0_A * + * IIO_ICRB4_B IIO_ICRB0_B * + * IIO_ICRB4_C IIO_ICRB0_C * + * IIO_ICRB4_D IIO_ICRB0_D * + * IIO_ICRB4_E IIO_ICRB0_E * + * IIO_ICRB5_A IIO_ICRB0_A * + * IIO_ICRB5_B IIO_ICRB0_B * + * IIO_ICRB5_C IIO_ICRB0_C * + * IIO_ICRB5_D IIO_ICRB0_D * + * IIO_ICRB5_E IIO_ICRB0_E * + * IIO_ICRB6_A IIO_ICRB0_A * + * IIO_ICRB6_B IIO_ICRB0_B * + * IIO_ICRB6_C IIO_ICRB0_C * + * IIO_ICRB6_D IIO_ICRB0_D * + * IIO_ICRB6_E IIO_ICRB0_E * + * IIO_ICRB7_A IIO_ICRB0_A * + * IIO_ICRB7_B IIO_ICRB0_B * + * IIO_ICRB7_C IIO_ICRB0_C * + * IIO_ICRB7_D IIO_ICRB0_D * + * IIO_ICRB7_E IIO_ICRB0_E * + * IIO_ICRB8_A IIO_ICRB0_A * + * IIO_ICRB8_B IIO_ICRB0_B * + * IIO_ICRB8_C IIO_ICRB0_C * + * IIO_ICRB8_D IIO_ICRB0_D * + * IIO_ICRB8_E IIO_ICRB0_E * + * IIO_ICRB9_A IIO_ICRB0_A * + * IIO_ICRB9_B IIO_ICRB0_B * + * IIO_ICRB9_C IIO_ICRB0_C * + * IIO_ICRB9_D IIO_ICRB0_D * + * IIO_ICRB9_E IIO_ICRB0_E * + * IIO_ICRBA_A IIO_ICRB0_A * + * IIO_ICRBA_B IIO_ICRB0_B * + * IIO_ICRBA_C IIO_ICRB0_C * + * IIO_ICRBA_D IIO_ICRB0_D * + * IIO_ICRBA_E IIO_ICRB0_E * + * IIO_ICRBB_A IIO_ICRB0_A * + * IIO_ICRBB_B IIO_ICRB0_B * + * IIO_ICRBB_C IIO_ICRB0_C * + * IIO_ICRBB_D IIO_ICRB0_D * + * IIO_ICRBB_E IIO_ICRB0_E * + * IIO_ICRBC_A IIO_ICRB0_A * + * IIO_ICRBC_B IIO_ICRB0_B * + * IIO_ICRBC_C IIO_ICRB0_C * + * IIO_ICRBC_D IIO_ICRB0_D * + * IIO_ICRBC_E IIO_ICRB0_E * + * IIO_ICRBD_A IIO_ICRB0_A * + * IIO_ICRBD_B IIO_ICRB0_B * + * IIO_ICRBD_C IIO_ICRB0_C * + * IIO_ICRBD_D IIO_ICRB0_D * + * IIO_ICRBD_E IIO_ICRB0_E * + * IIO_ICRBE_A IIO_ICRB0_A * + * IIO_ICRBE_B IIO_ICRB0_B * + * IIO_ICRBE_C IIO_ICRB0_C * + * IIO_ICRBE_D IIO_ICRB0_D * + * IIO_ICRBE_E IIO_ICRB0_E * + * * + ************************************************************************/ + +/* + * Slightly friendlier names for some common registers. + */ +#define IIO_WIDGET IIO_WID /* Widget identification */ +#define IIO_WIDGET_STAT IIO_WSTAT /* Widget status register */ +#define IIO_WIDGET_CTRL IIO_WCR /* Widget control register */ +#define IIO_PROTECT IIO_ILAPR /* IO interface protection */ +#define IIO_PROTECT_OVRRD IIO_ILAPO /* IO protect override */ +#define IIO_OUTWIDGET_ACCESS IIO_IOWA /* Outbound widget access */ +#define IIO_INWIDGET_ACCESS IIO_IIWA /* Inbound widget access */ +#define IIO_INDEV_ERR_MASK IIO_IIDEM /* Inbound device error mask */ +#define IIO_LLP_CSR IIO_ILCSR /* LLP control and status */ +#define IIO_LLP_LOG IIO_ILLR /* LLP log */ +#define IIO_XTALKCC_TOUT IIO_IXCC /* Xtalk credit count timeout */ +#define IIO_XTALKTT_TOUT IIO_IXTT /* Xtalk tail timeout */ +#define IIO_IO_ERR_CLR IIO_IECLR /* IO error clear */ +#define IIO_IGFX_0 IIO_IGFX0 +#define IIO_IGFX_1 IIO_IGFX1 +#define IIO_IBCT_0 IIO_IBCT0 +#define IIO_IBCT_1 IIO_IBCT1 +#define IIO_IBLS_0 IIO_IBLS0 +#define IIO_IBLS_1 IIO_IBLS1 +#define IIO_IBSA_0 IIO_IBSA0 +#define IIO_IBSA_1 IIO_IBSA1 +#define IIO_IBDA_0 IIO_IBDA0 +#define IIO_IBDA_1 IIO_IBDA1 +#define IIO_IBNA_0 IIO_IBNA0 +#define IIO_IBNA_1 IIO_IBNA1 +#define IIO_IBIA_0 IIO_IBIA0 +#define IIO_IBIA_1 IIO_IBIA1 +#define IIO_IOPRB_0 IIO_IPRB0 + +#define IIO_PRTE_A(_x) (IIO_IPRTE0_A + (8 * (_x))) +#define IIO_PRTE_B(_x) (IIO_IPRTE0_B + (8 * (_x))) +#define IIO_NUM_PRTES 8 /* Total number of PRB table entries */ +#define IIO_WIDPRTE_A(x) IIO_PRTE_A(((x) - 8)) /* widget ID to its PRTE num */ +#define IIO_WIDPRTE_B(x) IIO_PRTE_B(((x) - 8)) /* widget ID to its PRTE num */ + +#define IIO_NUM_IPRBS 9 + +#define IIO_LLP_CSR_IS_UP 0x00002000 +#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000 +#define IIO_LLP_CSR_LLP_STAT_SHFT 12 + +#define IIO_LLP_CB_MAX 0xffff /* in ILLR CB_CNT, Max Check Bit errors */ +#define IIO_LLP_SN_MAX 0xffff /* in ILLR SN_CNT, Max Sequence Number errors */ + +/* key to IIO_PROTECT_OVRRD */ +#define IIO_PROTECT_OVRRD_KEY 0x53474972756c6573ull /* "SGIrules" */ + +/* BTE register names */ +#define IIO_BTE_STAT_0 IIO_IBLS_0 /* Also BTE length/status 0 */ +#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */ +#define IIO_BTE_DEST_0 IIO_IBDA_0 /* Also BTE dest. address 0 */ +#define IIO_BTE_CTRL_0 IIO_IBCT_0 /* Also BTE control/terminate 0 */ +#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */ +#define IIO_BTE_INT_0 IIO_IBIA_0 /* Also BTE interrupt 0 */ +#define IIO_BTE_OFF_0 0 /* Base offset from BTE 0 regs. */ +#define IIO_BTE_OFF_1 (IIO_IBLS_1 - IIO_IBLS_0) /* Offset from base to BTE 1 */ + +/* BTE register offsets from base */ +#define BTEOFF_STAT 0 +#define BTEOFF_SRC (IIO_BTE_SRC_0 - IIO_BTE_STAT_0) +#define BTEOFF_DEST (IIO_BTE_DEST_0 - IIO_BTE_STAT_0) +#define BTEOFF_CTRL (IIO_BTE_CTRL_0 - IIO_BTE_STAT_0) +#define BTEOFF_NOTIFY (IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0) +#define BTEOFF_INT (IIO_BTE_INT_0 - IIO_BTE_STAT_0) + +/* names used in shub diags */ +#define IIO_BASE_BTE0 IIO_IBLS_0 +#define IIO_BASE_BTE1 IIO_IBLS_1 + +/* + * Macro which takes the widget number, and returns the + * IO PRB address of that widget. + * value _x is expected to be a widget number in the range + * 0, 8 - 0xF + */ +#define IIO_IOPRB(_x) (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \ + (_x) : \ + (_x) - (HUB_WIDGET_ID_MIN-1)) << 3) ) + +/* GFX Flow Control Node/Widget Register */ +#define IIO_IGFX_W_NUM_BITS 4 /* size of widget num field */ +#define IIO_IGFX_W_NUM_MASK ((1<> IIO_WSTAT_TXRETRY_SHFT) & \ + IIO_WSTAT_TXRETRY_MASK) + +/* Number of II perf. counters we can multiplex at once */ + +#define IO_PERF_SETS 32 + +/* Bit for the widget in inbound access register */ +#define IIO_IIWA_WIDGET(_w) ((u64)(1ULL << _w)) +/* Bit for the widget in outbound access register */ +#define IIO_IOWA_WIDGET(_w) ((u64)(1ULL << _w)) + +/* NOTE: The following define assumes that we are going to get + * widget numbers from 8 thru F and the device numbers within + * widget from 0 thru 7. + */ +#define IIO_IIDEM_WIDGETDEV_MASK(w, d) ((u64)(1ULL << (8 * ((w) - 8) + (d)))) + +/* IO Interrupt Destination Register */ +#define IIO_IIDSR_SENT_SHIFT 28 +#define IIO_IIDSR_SENT_MASK 0x30000000 +#define IIO_IIDSR_ENB_SHIFT 24 +#define IIO_IIDSR_ENB_MASK 0x01000000 +#define IIO_IIDSR_NODE_SHIFT 9 +#define IIO_IIDSR_NODE_MASK 0x000ff700 +#define IIO_IIDSR_PI_ID_SHIFT 8 +#define IIO_IIDSR_PI_ID_MASK 0x00000100 +#define IIO_IIDSR_LVL_SHIFT 0 +#define IIO_IIDSR_LVL_MASK 0x000000ff + +/* Xtalk timeout threshhold register (IIO_IXTT) */ +#define IXTT_RRSP_TO_SHFT 55 /* read response timeout */ +#define IXTT_RRSP_TO_MASK (0x1FULL << IXTT_RRSP_TO_SHFT) +#define IXTT_RRSP_PS_SHFT 32 /* read responsed TO prescalar */ +#define IXTT_RRSP_PS_MASK (0x7FFFFFULL << IXTT_RRSP_PS_SHFT) +#define IXTT_TAIL_TO_SHFT 0 /* tail timeout counter threshold */ +#define IXTT_TAIL_TO_MASK (0x3FFFFFFULL << IXTT_TAIL_TO_SHFT) + +/* + * The IO LLP control status register and widget control register + */ + +typedef union hubii_wcr_u { + u64 wcr_reg_value; + struct { + u64 wcr_widget_id:4, /* LLP crossbar credit */ + wcr_tag_mode:1, /* Tag mode */ + wcr_rsvd1:8, /* Reserved */ + wcr_xbar_crd:3, /* LLP crossbar credit */ + wcr_f_bad_pkt:1, /* Force bad llp pkt enable */ + wcr_dir_con:1, /* widget direct connect */ + wcr_e_thresh:5, /* elasticity threshold */ + wcr_rsvd:41; /* unused */ + } wcr_fields_s; +} hubii_wcr_t; + +#define iwcr_dir_con wcr_fields_s.wcr_dir_con + +/* The structures below are defined to extract and modify the ii +performance registers */ + +/* io_perf_sel allows the caller to specify what tests will be + performed */ + +typedef union io_perf_sel { + u64 perf_sel_reg; + struct { + u64 perf_ippr0:4, perf_ippr1:4, perf_icct:8, perf_rsvd:48; + } perf_sel_bits; +} io_perf_sel_t; + +/* io_perf_cnt is to extract the count from the shub registers. Due to + hardware problems there is only one counter, not two. */ + +typedef union io_perf_cnt { + u64 perf_cnt; + struct { + u64 perf_cnt:20, perf_rsvd2:12, perf_rsvd1:32; + } perf_cnt_bits; + +} io_perf_cnt_t; + +typedef union iprte_a { + u64 entry; + struct { + u64 i_rsvd_1:3; + u64 i_addr:38; + u64 i_init:3; + u64 i_source:8; + u64 i_rsvd:2; + u64 i_widget:4; + u64 i_to_cnt:5; + u64 i_vld:1; + } iprte_fields; +} iprte_a_t; + +#endif /* _ASM_IA64_SN_SHUBIO_H */ diff --git a/arch/ia64/include/asm/sn/simulator.h b/arch/ia64/include/asm/sn/simulator.h new file mode 100644 index 000000000000..c2611f6cfe33 --- /dev/null +++ b/arch/ia64/include/asm/sn/simulator.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_SIMULATOR_H +#define _ASM_IA64_SN_SIMULATOR_H + +#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV) +#define SNMAGIC 0xaeeeeeee8badbeefL +#define IS_MEDUSA() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;}) + +#define SIMULATOR_SLEEP() asm("nop.i 0x8beef") +#define IS_RUNNING_ON_SIMULATOR() (sn_prom_type) +#define IS_RUNNING_ON_FAKE_PROM() (sn_prom_type == 2) +extern int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */ +#else +#define IS_MEDUSA() 0 +#define SIMULATOR_SLEEP() +#define IS_RUNNING_ON_SIMULATOR() 0 +#endif + +#endif /* _ASM_IA64_SN_SIMULATOR_H */ diff --git a/arch/ia64/include/asm/sn/sn2/sn_hwperf.h b/arch/ia64/include/asm/sn/sn2/sn_hwperf.h new file mode 100644 index 000000000000..e61ebac38cdd --- /dev/null +++ b/arch/ia64/include/asm/sn/sn2/sn_hwperf.h @@ -0,0 +1,242 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved. + * + * Data types used by the SN_SAL_HWPERF_OP SAL call for monitoring + * SGI Altix node and router hardware + * + * Mark Goodwin Mon Aug 30 12:23:46 EST 2004 + */ + +#ifndef SN_HWPERF_H +#define SN_HWPERF_H + +/* + * object structure. SN_HWPERF_ENUM_OBJECTS and SN_HWPERF_GET_CPU_INFO + * return an array of these. Do not change this without also + * changing the corresponding SAL code. + */ +#define SN_HWPERF_MAXSTRING 128 +struct sn_hwperf_object_info { + u32 id; + union { + struct { + u64 this_part:1; + u64 is_shared:1; + } fields; + struct { + u64 flags; + u64 reserved; + } b; + } f; + char name[SN_HWPERF_MAXSTRING]; + char location[SN_HWPERF_MAXSTRING]; + u32 ports; +}; + +#define sn_hwp_this_part f.fields.this_part +#define sn_hwp_is_shared f.fields.is_shared +#define sn_hwp_flags f.b.flags + +/* macros for object classification */ +#define SN_HWPERF_IS_NODE(x) ((x) && strstr((x)->name, "SHub")) +#define SN_HWPERF_IS_NODE_SHUB2(x) ((x) && strstr((x)->name, "SHub 2.")) +#define SN_HWPERF_IS_IONODE(x) ((x) && strstr((x)->name, "TIO")) +#define SN_HWPERF_IS_NL3ROUTER(x) ((x) && strstr((x)->name, "NL3Router")) +#define SN_HWPERF_IS_NL4ROUTER(x) ((x) && strstr((x)->name, "NL4Router")) +#define SN_HWPERF_IS_OLDROUTER(x) ((x) && strstr((x)->name, "Router")) +#define SN_HWPERF_IS_ROUTER(x) (SN_HWPERF_IS_NL3ROUTER(x) || \ + SN_HWPERF_IS_NL4ROUTER(x) || \ + SN_HWPERF_IS_OLDROUTER(x)) +#define SN_HWPERF_FOREIGN(x) ((x) && !(x)->sn_hwp_this_part && !(x)->sn_hwp_is_shared) +#define SN_HWPERF_SAME_OBJTYPE(x,y) ((SN_HWPERF_IS_NODE(x) && SN_HWPERF_IS_NODE(y)) ||\ + (SN_HWPERF_IS_IONODE(x) && SN_HWPERF_IS_IONODE(y)) ||\ + (SN_HWPERF_IS_ROUTER(x) && SN_HWPERF_IS_ROUTER(y))) + +/* numa port structure, SN_HWPERF_ENUM_PORTS returns an array of these */ +struct sn_hwperf_port_info { + u32 port; + u32 conn_id; + u32 conn_port; +}; + +/* for HWPERF_{GET,SET}_MMRS */ +struct sn_hwperf_data { + u64 addr; + u64 data; +}; + +/* user ioctl() argument, see below */ +struct sn_hwperf_ioctl_args { + u64 arg; /* argument, usually an object id */ + u64 sz; /* size of transfer */ + void *ptr; /* pointer to source/target */ + u32 v0; /* second return value */ +}; + +/* + * For SN_HWPERF_{GET,SET}_MMRS and SN_HWPERF_OBJECT_DISTANCE, + * sn_hwperf_ioctl_args.arg can be used to specify a CPU on which + * to call SAL, and whether to use an interprocessor interrupt + * or task migration in order to do so. If the CPU specified is + * SN_HWPERF_ARG_ANY_CPU, then the current CPU will be used. + */ +#define SN_HWPERF_ARG_ANY_CPU 0x7fffffffUL +#define SN_HWPERF_ARG_CPU_MASK 0x7fffffff00000000ULL +#define SN_HWPERF_ARG_USE_IPI_MASK 0x8000000000000000ULL +#define SN_HWPERF_ARG_OBJID_MASK 0x00000000ffffffffULL + +/* + * ioctl requests on the "sn_hwperf" misc device that call SAL. + */ +#define SN_HWPERF_OP_MEM_COPYIN 0x1000 +#define SN_HWPERF_OP_MEM_COPYOUT 0x2000 +#define SN_HWPERF_OP_MASK 0x0fff + +/* + * Determine mem requirement. + * arg don't care + * sz 8 + * p pointer to u64 integer + */ +#define SN_HWPERF_GET_HEAPSIZE 1 + +/* + * Install mem for SAL drvr + * arg don't care + * sz sizeof buffer pointed to by p + * p pointer to buffer for scratch area + */ +#define SN_HWPERF_INSTALL_HEAP 2 + +/* + * Determine number of objects + * arg don't care + * sz 8 + * p pointer to u64 integer + */ +#define SN_HWPERF_OBJECT_COUNT (10|SN_HWPERF_OP_MEM_COPYOUT) + +/* + * Determine object "distance", relative to a cpu. This operation can + * execute on a designated logical cpu number, using either an IPI or + * via task migration. If the cpu number is SN_HWPERF_ANY_CPU, then + * the current CPU is used. See the SN_HWPERF_ARG_* macros above. + * + * arg bitmap of IPI flag, cpu number and object id + * sz 8 + * p pointer to u64 integer + */ +#define SN_HWPERF_OBJECT_DISTANCE (11|SN_HWPERF_OP_MEM_COPYOUT) + +/* + * Enumerate objects. Special case if sz == 8, returns the required + * buffer size. + * arg don't care + * sz sizeof buffer pointed to by p + * p pointer to array of struct sn_hwperf_object_info + */ +#define SN_HWPERF_ENUM_OBJECTS (12|SN_HWPERF_OP_MEM_COPYOUT) + +/* + * Enumerate NumaLink ports for an object. Special case if sz == 8, + * returns the required buffer size. + * arg object id + * sz sizeof buffer pointed to by p + * p pointer to array of struct sn_hwperf_port_info + */ +#define SN_HWPERF_ENUM_PORTS (13|SN_HWPERF_OP_MEM_COPYOUT) + +/* + * SET/GET memory mapped registers. These operations can execute + * on a designated logical cpu number, using either an IPI or via + * task migration. If the cpu number is SN_HWPERF_ANY_CPU, then + * the current CPU is used. See the SN_HWPERF_ARG_* macros above. + * + * arg bitmap of ipi flag, cpu number and object id + * sz sizeof buffer pointed to by p + * p pointer to array of struct sn_hwperf_data + */ +#define SN_HWPERF_SET_MMRS (14|SN_HWPERF_OP_MEM_COPYIN) +#define SN_HWPERF_GET_MMRS (15|SN_HWPERF_OP_MEM_COPYOUT| \ + SN_HWPERF_OP_MEM_COPYIN) +/* + * Lock a shared object + * arg object id + * sz don't care + * p don't care + */ +#define SN_HWPERF_ACQUIRE 16 + +/* + * Unlock a shared object + * arg object id + * sz don't care + * p don't care + */ +#define SN_HWPERF_RELEASE 17 + +/* + * Break a lock on a shared object + * arg object id + * sz don't care + * p don't care + */ +#define SN_HWPERF_FORCE_RELEASE 18 + +/* + * ioctl requests on "sn_hwperf" that do not call SAL + */ + +/* + * get cpu info as an array of hwperf_object_info_t. + * id is logical CPU number, name is description, location + * is geoid (e.g. 001c04#1c). Special case if sz == 8, + * returns the required buffer size. + * + * arg don't care + * sz sizeof buffer pointed to by p + * p pointer to array of struct sn_hwperf_object_info + */ +#define SN_HWPERF_GET_CPU_INFO (100|SN_HWPERF_OP_MEM_COPYOUT) + +/* + * Given an object id, return it's node number (aka cnode). + * arg object id + * sz 8 + * p pointer to u64 integer + */ +#define SN_HWPERF_GET_OBJ_NODE (101|SN_HWPERF_OP_MEM_COPYOUT) + +/* + * Given a node number (cnode), return it's nasid. + * arg ordinal node number (aka cnodeid) + * sz 8 + * p pointer to u64 integer + */ +#define SN_HWPERF_GET_NODE_NASID (102|SN_HWPERF_OP_MEM_COPYOUT) + +/* + * Given a node id, determine the id of the nearest node with CPUs + * and the id of the nearest node that has memory. The argument + * node would normally be a "headless" node, e.g. an "IO node". + * Return 0 on success. + */ +extern int sn_hwperf_get_nearest_node(cnodeid_t node, + cnodeid_t *near_mem, cnodeid_t *near_cpu); + +/* return codes */ +#define SN_HWPERF_OP_OK 0 +#define SN_HWPERF_OP_NOMEM 1 +#define SN_HWPERF_OP_NO_PERM 2 +#define SN_HWPERF_OP_IO_ERROR 3 +#define SN_HWPERF_OP_BUSY 4 +#define SN_HWPERF_OP_RECONFIGURE 253 +#define SN_HWPERF_OP_INVAL 254 + +int sn_topology_open(struct inode *inode, struct file *file); +int sn_topology_release(struct inode *inode, struct file *file); +#endif /* SN_HWPERF_H */ diff --git a/arch/ia64/include/asm/sn/sn_cpuid.h b/arch/ia64/include/asm/sn/sn_cpuid.h new file mode 100644 index 000000000000..a676dd9ace3e --- /dev/null +++ b/arch/ia64/include/asm/sn/sn_cpuid.h @@ -0,0 +1,132 @@ +/* + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved. + */ + + +#ifndef _ASM_IA64_SN_SN_CPUID_H +#define _ASM_IA64_SN_SN_CPUID_H + +#include +#include +#include +#include + + +/* + * Functions for converting between cpuids, nodeids and NASIDs. + * + * These are for SGI platforms only. + * + */ + + + + +/* + * Definitions of terms (these definitions are for IA64 ONLY. Other architectures + * use cpuid/cpunum quite defferently): + * + * CPUID - a number in range of 0..NR_CPUS-1 that uniquely identifies + * the cpu. The value cpuid has no significance on IA64 other than + * the boot cpu is 0. + * smp_processor_id() returns the cpuid of the current cpu. + * + * CPU_PHYSICAL_ID (also known as HARD_PROCESSOR_ID) + * This is the same as 31:24 of the processor LID register + * hard_smp_processor_id()- cpu_physical_id of current processor + * cpu_physical_id(cpuid) - convert a to a + * cpu_logical_id(phy_id) - convert a to a + * * not real efficient - don't use in perf critical code + * + * SLICE - a number in the range of 0 - 3 (typically) that represents the + * cpu number on a brick. + * + * SUBNODE - (almost obsolete) the number of the FSB that a cpu is + * connected to. This is also the same as the PI number. Usually 0 or 1. + * + * NOTE!!!: the value of the bits in the cpu physical id (SAPICid or LID) of a cpu has no + * significance. The SAPIC id (LID) is a 16-bit cookie that has meaning only to the PROM. + * + * + * The macros convert between cpu physical ids & slice/nasid/cnodeid. + * These terms are described below: + * + * + * Brick + * ----- ----- ----- ----- CPU + * | 0 | | 1 | | 0 | | 1 | SLICE + * ----- ----- ----- ----- + * | | | | + * | | | | + * 0 | | 2 0 | | 2 FSB SLOT + * ------- ------- + * | | + * | | + * | | + * ------------ ------------- + * | | | | + * | SHUB | | SHUB | NASID (0..MAX_NASIDS) + * | |----- | | CNODEID (0..num_compact_nodes-1) + * | | | | + * | | | | + * ------------ ------------- + * | | + * + * + */ + +#define get_node_number(addr) NASID_GET(addr) + +/* + * NOTE: on non-MP systems, only cpuid 0 exists + */ + +extern short physical_node_map[]; /* indexed by nasid to get cnode */ + +/* + * Macros for retrieving info about current cpu + */ +#define get_nasid() (sn_nodepda->phys_cpuid[smp_processor_id()].nasid) +#define get_subnode() (sn_nodepda->phys_cpuid[smp_processor_id()].subnode) +#define get_slice() (sn_nodepda->phys_cpuid[smp_processor_id()].slice) +#define get_cnode() (sn_nodepda->phys_cpuid[smp_processor_id()].cnode) +#define get_sapicid() ((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff) + +/* + * Macros for retrieving info about an arbitrary cpu + * cpuid - logical cpu id + */ +#define cpuid_to_nasid(cpuid) (sn_nodepda->phys_cpuid[cpuid].nasid) +#define cpuid_to_subnode(cpuid) (sn_nodepda->phys_cpuid[cpuid].subnode) +#define cpuid_to_slice(cpuid) (sn_nodepda->phys_cpuid[cpuid].slice) + + +/* + * Dont use the following in performance critical code. They require scans + * of potentially large tables. + */ +extern int nasid_slice_to_cpuid(int, int); + +/* + * cnodeid_to_nasid - convert a cnodeid to a NASID + */ +#define cnodeid_to_nasid(cnodeid) (sn_cnodeid_to_nasid[cnodeid]) + +/* + * nasid_to_cnodeid - convert a NASID to a cnodeid + */ +#define nasid_to_cnodeid(nasid) (physical_node_map[nasid]) + +/* + * partition_coherence_id - get the coherence ID of the current partition + */ +extern u8 sn_coherency_id; +#define partition_coherence_id() (sn_coherency_id) + +#endif /* _ASM_IA64_SN_SN_CPUID_H */ + diff --git a/arch/ia64/include/asm/sn/sn_feature_sets.h b/arch/ia64/include/asm/sn/sn_feature_sets.h new file mode 100644 index 000000000000..8e83ac117ace --- /dev/null +++ b/arch/ia64/include/asm/sn/sn_feature_sets.h @@ -0,0 +1,58 @@ +#ifndef _ASM_IA64_SN_FEATURE_SETS_H +#define _ASM_IA64_SN_FEATURE_SETS_H + +/* + * SN PROM Features + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2005-2006 Silicon Graphics, Inc. All rights reserved. + */ + + +/* --------------------- PROM Features -----------------------------*/ +extern int sn_prom_feature_available(int id); + +#define MAX_PROM_FEATURE_SETS 2 + +/* + * The following defines features that may or may not be supported by the + * current PROM. The OS uses sn_prom_feature_available(feature) to test for + * the presence of a PROM feature. Down rev (old) PROMs will always test + * "false" for new features. + * + * Use: + * if (sn_prom_feature_available(PRF_XXX)) + * ... + */ + +#define PRF_PAL_CACHE_FLUSH_SAFE 0 +#define PRF_DEVICE_FLUSH_LIST 1 +#define PRF_HOTPLUG_SUPPORT 2 +#define PRF_CPU_DISABLE_SUPPORT 3 + +/* --------------------- OS Features -------------------------------*/ + +/* + * The following defines OS features that are optionally present in + * the operating system. + * During boot, PROM is notified of these features via a series of calls: + * + * ia64_sn_set_os_feature(feature1); + * + * Once enabled, a feature cannot be disabled. + * + * By default, features are disabled unless explicitly enabled. + * + * These defines must be kept in sync with the corresponding + * PROM definitions in feature_sets.h. + */ +#define OSF_MCA_SLV_TO_OS_INIT_SLV 0 +#define OSF_FEAT_LOG_SBES 1 +#define OSF_ACPI_ENABLE 2 +#define OSF_PCISEGMENT_ENABLE 3 + + +#endif /* _ASM_IA64_SN_FEATURE_SETS_H */ diff --git a/arch/ia64/include/asm/sn/sn_sal.h b/arch/ia64/include/asm/sn/sn_sal.h new file mode 100644 index 000000000000..57e649d388b8 --- /dev/null +++ b/arch/ia64/include/asm/sn/sn_sal.h @@ -0,0 +1,1188 @@ +#ifndef _ASM_IA64_SN_SN_SAL_H +#define _ASM_IA64_SN_SN_SAL_H + +/* + * System Abstraction Layer definitions for IA64 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2000-2006 Silicon Graphics, Inc. All rights reserved. + */ + + +#include +#include +#include +#include +#include +#include + +// SGI Specific Calls +#define SN_SAL_POD_MODE 0x02000001 +#define SN_SAL_SYSTEM_RESET 0x02000002 +#define SN_SAL_PROBE 0x02000003 +#define SN_SAL_GET_MASTER_NASID 0x02000004 +#define SN_SAL_GET_KLCONFIG_ADDR 0x02000005 +#define SN_SAL_LOG_CE 0x02000006 +#define SN_SAL_REGISTER_CE 0x02000007 +#define SN_SAL_GET_PARTITION_ADDR 0x02000009 +#define SN_SAL_XP_ADDR_REGION 0x0200000f +#define SN_SAL_NO_FAULT_ZONE_VIRTUAL 0x02000010 +#define SN_SAL_NO_FAULT_ZONE_PHYSICAL 0x02000011 +#define SN_SAL_PRINT_ERROR 0x02000012 +#define SN_SAL_REGISTER_PMI_HANDLER 0x02000014 +#define SN_SAL_SET_ERROR_HANDLING_FEATURES 0x0200001a // reentrant +#define SN_SAL_GET_FIT_COMPT 0x0200001b // reentrant +#define SN_SAL_GET_SAPIC_INFO 0x0200001d +#define SN_SAL_GET_SN_INFO 0x0200001e +#define SN_SAL_CONSOLE_PUTC 0x02000021 +#define SN_SAL_CONSOLE_GETC 0x02000022 +#define SN_SAL_CONSOLE_PUTS 0x02000023 +#define SN_SAL_CONSOLE_GETS 0x02000024 +#define SN_SAL_CONSOLE_GETS_TIMEOUT 0x02000025 +#define SN_SAL_CONSOLE_POLL 0x02000026 +#define SN_SAL_CONSOLE_INTR 0x02000027 +#define SN_SAL_CONSOLE_PUTB 0x02000028 +#define SN_SAL_CONSOLE_XMIT_CHARS 0x0200002a +#define SN_SAL_CONSOLE_READC 0x0200002b +#define SN_SAL_SYSCTL_OP 0x02000030 +#define SN_SAL_SYSCTL_MODID_GET 0x02000031 +#define SN_SAL_SYSCTL_GET 0x02000032 +#define SN_SAL_SYSCTL_IOBRICK_MODULE_GET 0x02000033 +#define SN_SAL_SYSCTL_IO_PORTSPEED_GET 0x02000035 +#define SN_SAL_SYSCTL_SLAB_GET 0x02000036 +#define SN_SAL_BUS_CONFIG 0x02000037 +#define SN_SAL_SYS_SERIAL_GET 0x02000038 +#define SN_SAL_PARTITION_SERIAL_GET 0x02000039 +#define SN_SAL_SYSCTL_PARTITION_GET 0x0200003a +#define SN_SAL_SYSTEM_POWER_DOWN 0x0200003b +#define SN_SAL_GET_MASTER_BASEIO_NASID 0x0200003c +#define SN_SAL_COHERENCE 0x0200003d +#define SN_SAL_MEMPROTECT 0x0200003e +#define SN_SAL_SYSCTL_FRU_CAPTURE 0x0200003f + +#define SN_SAL_SYSCTL_IOBRICK_PCI_OP 0x02000042 // reentrant +#define SN_SAL_IROUTER_OP 0x02000043 +#define SN_SAL_SYSCTL_EVENT 0x02000044 +#define SN_SAL_IOIF_INTERRUPT 0x0200004a +#define SN_SAL_HWPERF_OP 0x02000050 // lock +#define SN_SAL_IOIF_ERROR_INTERRUPT 0x02000051 +#define SN_SAL_IOIF_PCI_SAFE 0x02000052 +#define SN_SAL_IOIF_SLOT_ENABLE 0x02000053 +#define SN_SAL_IOIF_SLOT_DISABLE 0x02000054 +#define SN_SAL_IOIF_GET_HUBDEV_INFO 0x02000055 +#define SN_SAL_IOIF_GET_PCIBUS_INFO 0x02000056 +#define SN_SAL_IOIF_GET_PCIDEV_INFO 0x02000057 +#define SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST 0x02000058 // deprecated +#define SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST 0x0200005a + +#define SN_SAL_IOIF_INIT 0x0200005f +#define SN_SAL_HUB_ERROR_INTERRUPT 0x02000060 +#define SN_SAL_BTE_RECOVER 0x02000061 +#define SN_SAL_RESERVED_DO_NOT_USE 0x02000062 +#define SN_SAL_IOIF_GET_PCI_TOPOLOGY 0x02000064 + +#define SN_SAL_GET_PROM_FEATURE_SET 0x02000065 +#define SN_SAL_SET_OS_FEATURE_SET 0x02000066 +#define SN_SAL_INJECT_ERROR 0x02000067 +#define SN_SAL_SET_CPU_NUMBER 0x02000068 + +#define SN_SAL_KERNEL_LAUNCH_EVENT 0x02000069 + +/* + * Service-specific constants + */ + +/* Console interrupt manipulation */ + /* action codes */ +#define SAL_CONSOLE_INTR_OFF 0 /* turn the interrupt off */ +#define SAL_CONSOLE_INTR_ON 1 /* turn the interrupt on */ +#define SAL_CONSOLE_INTR_STATUS 2 /* retrieve the interrupt status */ + /* interrupt specification & status return codes */ +#define SAL_CONSOLE_INTR_XMIT 1 /* output interrupt */ +#define SAL_CONSOLE_INTR_RECV 2 /* input interrupt */ + +/* interrupt handling */ +#define SAL_INTR_ALLOC 1 +#define SAL_INTR_FREE 2 +#define SAL_INTR_REDIRECT 3 + +/* + * operations available on the generic SN_SAL_SYSCTL_OP + * runtime service + */ +#define SAL_SYSCTL_OP_IOBOARD 0x0001 /* retrieve board type */ +#define SAL_SYSCTL_OP_TIO_JLCK_RST 0x0002 /* issue TIO clock reset */ + +/* + * IRouter (i.e. generalized system controller) operations + */ +#define SAL_IROUTER_OPEN 0 /* open a subchannel */ +#define SAL_IROUTER_CLOSE 1 /* close a subchannel */ +#define SAL_IROUTER_SEND 2 /* send part of an IRouter packet */ +#define SAL_IROUTER_RECV 3 /* receive part of an IRouter packet */ +#define SAL_IROUTER_INTR_STATUS 4 /* check the interrupt status for + * an open subchannel + */ +#define SAL_IROUTER_INTR_ON 5 /* enable an interrupt */ +#define SAL_IROUTER_INTR_OFF 6 /* disable an interrupt */ +#define SAL_IROUTER_INIT 7 /* initialize IRouter driver */ + +/* IRouter interrupt mask bits */ +#define SAL_IROUTER_INTR_XMIT SAL_CONSOLE_INTR_XMIT +#define SAL_IROUTER_INTR_RECV SAL_CONSOLE_INTR_RECV + +/* + * Error Handling Features + */ +#define SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV 0x1 // obsolete +#define SAL_ERR_FEAT_LOG_SBES 0x2 // obsolete +#define SAL_ERR_FEAT_MFR_OVERRIDE 0x4 +#define SAL_ERR_FEAT_SBE_THRESHOLD 0xffff0000 + +/* + * SAL Error Codes + */ +#define SALRET_MORE_PASSES 1 +#define SALRET_OK 0 +#define SALRET_NOT_IMPLEMENTED (-1) +#define SALRET_INVALID_ARG (-2) +#define SALRET_ERROR (-3) + +#define SN_SAL_FAKE_PROM 0x02009999 + +/** + * sn_sal_revision - get the SGI SAL revision number + * + * The SGI PROM stores its version in the sal_[ab]_rev_(major|minor). + * This routine simply extracts the major and minor values and + * presents them in a u32 format. + * + * For example, version 4.05 would be represented at 0x0405. + */ +static inline u32 +sn_sal_rev(void) +{ + struct ia64_sal_systab *systab = __va(efi.sal_systab); + + return (u32)(systab->sal_b_rev_major << 8 | systab->sal_b_rev_minor); +} + +/* + * Returns the master console nasid, if the call fails, return an illegal + * value. + */ +static inline u64 +ia64_sn_get_console_nasid(void) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_NASID, 0, 0, 0, 0, 0, 0, 0); + + if (ret_stuff.status < 0) + return ret_stuff.status; + + /* Master console nasid is in 'v0' */ + return ret_stuff.v0; +} + +/* + * Returns the master baseio nasid, if the call fails, return an illegal + * value. + */ +static inline u64 +ia64_sn_get_master_baseio_nasid(void) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_BASEIO_NASID, 0, 0, 0, 0, 0, 0, 0); + + if (ret_stuff.status < 0) + return ret_stuff.status; + + /* Master baseio nasid is in 'v0' */ + return ret_stuff.v0; +} + +static inline void * +ia64_sn_get_klconfig_addr(nasid_t nasid) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0); + return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL; +} + +/* + * Returns the next console character. + */ +static inline u64 +ia64_sn_console_getc(int *ch) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_GETC, 0, 0, 0, 0, 0, 0, 0); + + /* character is in 'v0' */ + *ch = (int)ret_stuff.v0; + + return ret_stuff.status; +} + +/* + * Read a character from the SAL console device, after a previous interrupt + * or poll operation has given us to know that a character is available + * to be read. + */ +static inline u64 +ia64_sn_console_readc(void) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_READC, 0, 0, 0, 0, 0, 0, 0); + + /* character is in 'v0' */ + return ret_stuff.v0; +} + +/* + * Sends the given character to the console. + */ +static inline u64 +ia64_sn_console_putc(char ch) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTC, (u64)ch, 0, 0, 0, 0, 0, 0); + + return ret_stuff.status; +} + +/* + * Sends the given buffer to the console. + */ +static inline u64 +ia64_sn_console_putb(const char *buf, int len) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTB, (u64)buf, (u64)len, 0, 0, 0, 0, 0); + + if ( ret_stuff.status == 0 ) { + return ret_stuff.v0; + } + return (u64)0; +} + +/* + * Print a platform error record + */ +static inline u64 +ia64_sn_plat_specific_err_print(int (*hook)(const char*, ...), char *rec) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_REENTRANT(ret_stuff, SN_SAL_PRINT_ERROR, (u64)hook, (u64)rec, 0, 0, 0, 0, 0); + + return ret_stuff.status; +} + +/* + * Check for Platform errors + */ +static inline u64 +ia64_sn_plat_cpei_handler(void) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_LOG_CE, 0, 0, 0, 0, 0, 0, 0); + + return ret_stuff.status; +} + +/* + * Set Error Handling Features (Obsolete) + */ +static inline u64 +ia64_sn_plat_set_error_handling_features(void) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_REENTRANT(ret_stuff, SN_SAL_SET_ERROR_HANDLING_FEATURES, + SAL_ERR_FEAT_LOG_SBES, + 0, 0, 0, 0, 0, 0); + + return ret_stuff.status; +} + +/* + * Checks for console input. + */ +static inline u64 +ia64_sn_console_check(int *result) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_POLL, 0, 0, 0, 0, 0, 0, 0); + + /* result is in 'v0' */ + *result = (int)ret_stuff.v0; + + return ret_stuff.status; +} + +/* + * Checks console interrupt status + */ +static inline u64 +ia64_sn_console_intr_status(void) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, + 0, SAL_CONSOLE_INTR_STATUS, + 0, 0, 0, 0, 0); + + if (ret_stuff.status == 0) { + return ret_stuff.v0; + } + + return 0; +} + +/* + * Enable an interrupt on the SAL console device. + */ +static inline void +ia64_sn_console_intr_enable(u64 intr) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, + intr, SAL_CONSOLE_INTR_ON, + 0, 0, 0, 0, 0); +} + +/* + * Disable an interrupt on the SAL console device. + */ +static inline void +ia64_sn_console_intr_disable(u64 intr) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, + intr, SAL_CONSOLE_INTR_OFF, + 0, 0, 0, 0, 0); +} + +/* + * Sends a character buffer to the console asynchronously. + */ +static inline u64 +ia64_sn_console_xmit_chars(char *buf, int len) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_XMIT_CHARS, + (u64)buf, (u64)len, + 0, 0, 0, 0, 0); + + if (ret_stuff.status == 0) { + return ret_stuff.v0; + } + + return 0; +} + +/* + * Returns the iobrick module Id + */ +static inline u64 +ia64_sn_sysctl_iobrick_module_get(nasid_t nasid, int *result) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYSCTL_IOBRICK_MODULE_GET, nasid, 0, 0, 0, 0, 0, 0); + + /* result is in 'v0' */ + *result = (int)ret_stuff.v0; + + return ret_stuff.status; +} + +/** + * ia64_sn_pod_mode - call the SN_SAL_POD_MODE function + * + * SN_SAL_POD_MODE actually takes an argument, but it's always + * 0 when we call it from the kernel, so we don't have to expose + * it to the caller. + */ +static inline u64 +ia64_sn_pod_mode(void) +{ + struct ia64_sal_retval isrv; + SAL_CALL_REENTRANT(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0); + if (isrv.status) + return 0; + return isrv.v0; +} + +/** + * ia64_sn_probe_mem - read from memory safely + * @addr: address to probe + * @size: number bytes to read (1,2,4,8) + * @data_ptr: address to store value read by probe (-1 returned if probe fails) + * + * Call into the SAL to do a memory read. If the read generates a machine + * check, this routine will recover gracefully and return -1 to the caller. + * @addr is usually a kernel virtual address in uncached space (i.e. the + * address starts with 0xc), but if called in physical mode, @addr should + * be a physical address. + * + * Return values: + * 0 - probe successful + * 1 - probe failed (generated MCA) + * 2 - Bad arg + * <0 - PAL error + */ +static inline u64 +ia64_sn_probe_mem(long addr, long size, void *data_ptr) +{ + struct ia64_sal_retval isrv; + + SAL_CALL(isrv, SN_SAL_PROBE, addr, size, 0, 0, 0, 0, 0); + + if (data_ptr) { + switch (size) { + case 1: + *((u8*)data_ptr) = (u8)isrv.v0; + break; + case 2: + *((u16*)data_ptr) = (u16)isrv.v0; + break; + case 4: + *((u32*)data_ptr) = (u32)isrv.v0; + break; + case 8: + *((u64*)data_ptr) = (u64)isrv.v0; + break; + default: + isrv.status = 2; + } + } + return isrv.status; +} + +/* + * Retrieve the system serial number as an ASCII string. + */ +static inline u64 +ia64_sn_sys_serial_get(char *buf) +{ + struct ia64_sal_retval ret_stuff; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYS_SERIAL_GET, buf, 0, 0, 0, 0, 0, 0); + return ret_stuff.status; +} + +extern char sn_system_serial_number_string[]; +extern u64 sn_partition_serial_number; + +static inline char * +sn_system_serial_number(void) { + if (sn_system_serial_number_string[0]) { + return(sn_system_serial_number_string); + } else { + ia64_sn_sys_serial_get(sn_system_serial_number_string); + return(sn_system_serial_number_string); + } +} + + +/* + * Returns a unique id number for this system and partition (suitable for + * use with license managers), based in part on the system serial number. + */ +static inline u64 +ia64_sn_partition_serial_get(void) +{ + struct ia64_sal_retval ret_stuff; + ia64_sal_oemcall_reentrant(&ret_stuff, SN_SAL_PARTITION_SERIAL_GET, 0, + 0, 0, 0, 0, 0, 0); + if (ret_stuff.status != 0) + return 0; + return ret_stuff.v0; +} + +static inline u64 +sn_partition_serial_number_val(void) { + if (unlikely(sn_partition_serial_number == 0)) { + sn_partition_serial_number = ia64_sn_partition_serial_get(); + } + return sn_partition_serial_number; +} + +/* + * Returns the partition id of the nasid passed in as an argument, + * or INVALID_PARTID if the partition id cannot be retrieved. + */ +static inline partid_t +ia64_sn_sysctl_partition_get(nasid_t nasid) +{ + struct ia64_sal_retval ret_stuff; + SAL_CALL(ret_stuff, SN_SAL_SYSCTL_PARTITION_GET, nasid, + 0, 0, 0, 0, 0, 0); + if (ret_stuff.status != 0) + return -1; + return ((partid_t)ret_stuff.v0); +} + +/* + * Returns the physical address of the partition's reserved page through + * an iterative number of calls. + * + * On first call, 'cookie' and 'len' should be set to 0, and 'addr' + * set to the nasid of the partition whose reserved page's address is + * being sought. + * On subsequent calls, pass the values, that were passed back on the + * previous call. + * + * While the return status equals SALRET_MORE_PASSES, keep calling + * this function after first copying 'len' bytes starting at 'addr' + * into 'buf'. Once the return status equals SALRET_OK, 'addr' will + * be the physical address of the partition's reserved page. If the + * return status equals neither of these, an error as occurred. + */ +static inline s64 +sn_partition_reserved_page_pa(u64 buf, u64 *cookie, u64 *addr, u64 *len) +{ + struct ia64_sal_retval rv; + ia64_sal_oemcall_reentrant(&rv, SN_SAL_GET_PARTITION_ADDR, *cookie, + *addr, buf, *len, 0, 0, 0); + *cookie = rv.v0; + *addr = rv.v1; + *len = rv.v2; + return rv.status; +} + +/* + * Register or unregister a physical address range being referenced across + * a partition boundary for which certain SAL errors should be scanned for, + * cleaned up and ignored. This is of value for kernel partitioning code only. + * Values for the operation argument: + * 1 = register this address range with SAL + * 0 = unregister this address range with SAL + * + * SAL maintains a reference count on an address range in case it is registered + * multiple times. + * + * On success, returns the reference count of the address range after the SAL + * call has performed the current registration/unregistration. Returns a + * negative value if an error occurred. + */ +static inline int +sn_register_xp_addr_region(u64 paddr, u64 len, int operation) +{ + struct ia64_sal_retval ret_stuff; + ia64_sal_oemcall(&ret_stuff, SN_SAL_XP_ADDR_REGION, paddr, len, + (u64)operation, 0, 0, 0, 0); + return ret_stuff.status; +} + +/* + * Register or unregister an instruction range for which SAL errors should + * be ignored. If an error occurs while in the registered range, SAL jumps + * to return_addr after ignoring the error. Values for the operation argument: + * 1 = register this instruction range with SAL + * 0 = unregister this instruction range with SAL + * + * Returns 0 on success, or a negative value if an error occurred. + */ +static inline int +sn_register_nofault_code(u64 start_addr, u64 end_addr, u64 return_addr, + int virtual, int operation) +{ + struct ia64_sal_retval ret_stuff; + u64 call; + if (virtual) { + call = SN_SAL_NO_FAULT_ZONE_VIRTUAL; + } else { + call = SN_SAL_NO_FAULT_ZONE_PHYSICAL; + } + ia64_sal_oemcall(&ret_stuff, call, start_addr, end_addr, return_addr, + (u64)1, 0, 0, 0); + return ret_stuff.status; +} + +/* + * Register or unregister a function to handle a PMI received by a CPU. + * Before calling the registered handler, SAL sets r1 to the value that + * was passed in as the global_pointer. + * + * If the handler pointer is NULL, then the currently registered handler + * will be unregistered. + * + * Returns 0 on success, or a negative value if an error occurred. + */ +static inline int +sn_register_pmi_handler(u64 handler, u64 global_pointer) +{ + struct ia64_sal_retval ret_stuff; + ia64_sal_oemcall(&ret_stuff, SN_SAL_REGISTER_PMI_HANDLER, handler, + global_pointer, 0, 0, 0, 0, 0); + return ret_stuff.status; +} + +/* + * Change or query the coherence domain for this partition. Each cpu-based + * nasid is represented by a bit in an array of 64-bit words: + * 0 = not in this partition's coherency domain + * 1 = in this partition's coherency domain + * + * It is not possible for the local system's nasids to be removed from + * the coherency domain. Purpose of the domain arguments: + * new_domain = set the coherence domain to the given nasids + * old_domain = return the current coherence domain + * + * Returns 0 on success, or a negative value if an error occurred. + */ +static inline int +sn_change_coherence(u64 *new_domain, u64 *old_domain) +{ + struct ia64_sal_retval ret_stuff; + ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_COHERENCE, (u64)new_domain, + (u64)old_domain, 0, 0, 0, 0, 0); + return ret_stuff.status; +} + +/* + * Change memory access protections for a physical address range. + * nasid_array is not used on Altix, but may be in future architectures. + * Available memory protection access classes are defined after the function. + */ +static inline int +sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array) +{ + struct ia64_sal_retval ret_stuff; + + ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_MEMPROTECT, paddr, len, + (u64)nasid_array, perms, 0, 0, 0); + return ret_stuff.status; +} +#define SN_MEMPROT_ACCESS_CLASS_0 0x14a080 +#define SN_MEMPROT_ACCESS_CLASS_1 0x2520c2 +#define SN_MEMPROT_ACCESS_CLASS_2 0x14a1ca +#define SN_MEMPROT_ACCESS_CLASS_3 0x14a290 +#define SN_MEMPROT_ACCESS_CLASS_6 0x084080 +#define SN_MEMPROT_ACCESS_CLASS_7 0x021080 + +/* + * Turns off system power. + */ +static inline void +ia64_sn_power_down(void) +{ + struct ia64_sal_retval ret_stuff; + SAL_CALL(ret_stuff, SN_SAL_SYSTEM_POWER_DOWN, 0, 0, 0, 0, 0, 0, 0); + while(1) + cpu_relax(); + /* never returns */ +} + +/** + * ia64_sn_fru_capture - tell the system controller to capture hw state + * + * This routine will call the SAL which will tell the system controller(s) + * to capture hw mmr information from each SHub in the system. + */ +static inline u64 +ia64_sn_fru_capture(void) +{ + struct ia64_sal_retval isrv; + SAL_CALL(isrv, SN_SAL_SYSCTL_FRU_CAPTURE, 0, 0, 0, 0, 0, 0, 0); + if (isrv.status) + return 0; + return isrv.v0; +} + +/* + * Performs an operation on a PCI bus or slot -- power up, power down + * or reset. + */ +static inline u64 +ia64_sn_sysctl_iobrick_pci_op(nasid_t n, u64 connection_type, + u64 bus, char slot, + u64 action) +{ + struct ia64_sal_retval rv = {0, 0, 0, 0}; + + SAL_CALL_NOLOCK(rv, SN_SAL_SYSCTL_IOBRICK_PCI_OP, connection_type, n, action, + bus, (u64) slot, 0, 0); + if (rv.status) + return rv.v0; + return 0; +} + + +/* + * Open a subchannel for sending arbitrary data to the system + * controller network via the system controller device associated with + * 'nasid'. Return the subchannel number or a negative error code. + */ +static inline int +ia64_sn_irtr_open(nasid_t nasid) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_OPEN, nasid, + 0, 0, 0, 0, 0); + return (int) rv.v0; +} + +/* + * Close system controller subchannel 'subch' previously opened on 'nasid'. + */ +static inline int +ia64_sn_irtr_close(nasid_t nasid, int subch) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_CLOSE, + (u64) nasid, (u64) subch, 0, 0, 0, 0); + return (int) rv.status; +} + +/* + * Read data from system controller associated with 'nasid' on + * subchannel 'subch'. The buffer to be filled is pointed to by + * 'buf', and its capacity is in the integer pointed to by 'len'. The + * referent of 'len' is set to the number of bytes read by the SAL + * call. The return value is either SALRET_OK (for bytes read) or + * SALRET_ERROR (for error or "no data available"). + */ +static inline int +ia64_sn_irtr_recv(nasid_t nasid, int subch, char *buf, int *len) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_RECV, + (u64) nasid, (u64) subch, (u64) buf, (u64) len, + 0, 0); + return (int) rv.status; +} + +/* + * Write data to the system controller network via the system + * controller associated with 'nasid' on suchannel 'subch'. The + * buffer to be written out is pointed to by 'buf', and 'len' is the + * number of bytes to be written. The return value is either the + * number of bytes written (which could be zero) or a negative error + * code. + */ +static inline int +ia64_sn_irtr_send(nasid_t nasid, int subch, char *buf, int len) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_SEND, + (u64) nasid, (u64) subch, (u64) buf, (u64) len, + 0, 0); + return (int) rv.v0; +} + +/* + * Check whether any interrupts are pending for the system controller + * associated with 'nasid' and its subchannel 'subch'. The return + * value is a mask of pending interrupts (SAL_IROUTER_INTR_XMIT and/or + * SAL_IROUTER_INTR_RECV). + */ +static inline int +ia64_sn_irtr_intr(nasid_t nasid, int subch) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_STATUS, + (u64) nasid, (u64) subch, 0, 0, 0, 0); + return (int) rv.v0; +} + +/* + * Enable the interrupt indicated by the intr parameter (either + * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV). + */ +static inline int +ia64_sn_irtr_intr_enable(nasid_t nasid, int subch, u64 intr) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_ON, + (u64) nasid, (u64) subch, intr, 0, 0, 0); + return (int) rv.v0; +} + +/* + * Disable the interrupt indicated by the intr parameter (either + * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV). + */ +static inline int +ia64_sn_irtr_intr_disable(nasid_t nasid, int subch, u64 intr) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_OFF, + (u64) nasid, (u64) subch, intr, 0, 0, 0); + return (int) rv.v0; +} + +/* + * Set up a node as the point of contact for system controller + * environmental event delivery. + */ +static inline int +ia64_sn_sysctl_event_init(nasid_t nasid) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_EVENT, (u64) nasid, + 0, 0, 0, 0, 0, 0); + return (int) rv.v0; +} + +/* + * Ask the system controller on the specified nasid to reset + * the CX corelet clock. Only valid on TIO nodes. + */ +static inline int +ia64_sn_sysctl_tio_clock_reset(nasid_t nasid) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_TIO_JLCK_RST, + nasid, 0, 0, 0, 0, 0); + if (rv.status != 0) + return (int)rv.status; + if (rv.v0 != 0) + return (int)rv.v0; + + return 0; +} + +/* + * Get the associated ioboard type for a given nasid. + */ +static inline s64 +ia64_sn_sysctl_ioboard_get(nasid_t nasid, u16 *ioboard) +{ + struct ia64_sal_retval isrv; + SAL_CALL_REENTRANT(isrv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_IOBOARD, + nasid, 0, 0, 0, 0, 0); + if (isrv.v0 != 0) { + *ioboard = isrv.v0; + return isrv.status; + } + if (isrv.v1 != 0) { + *ioboard = isrv.v1; + return isrv.status; + } + + return isrv.status; +} + +/** + * ia64_sn_get_fit_compt - read a FIT entry from the PROM header + * @nasid: NASID of node to read + * @index: FIT entry index to be retrieved (0..n) + * @fitentry: 16 byte buffer where FIT entry will be stored. + * @banbuf: optional buffer for retrieving banner + * @banlen: length of banner buffer + * + * Access to the physical PROM chips needs to be serialized since reads and + * writes can't occur at the same time, so we need to call into the SAL when + * we want to look at the FIT entries on the chips. + * + * Returns: + * %SALRET_OK if ok + * %SALRET_INVALID_ARG if index too big + * %SALRET_NOT_IMPLEMENTED if running on older PROM + * ??? if nasid invalid OR banner buffer not large enough + */ +static inline int +ia64_sn_get_fit_compt(u64 nasid, u64 index, void *fitentry, void *banbuf, + u64 banlen) +{ + struct ia64_sal_retval rv; + SAL_CALL_NOLOCK(rv, SN_SAL_GET_FIT_COMPT, nasid, index, fitentry, + banbuf, banlen, 0, 0); + return (int) rv.status; +} + +/* + * Initialize the SAL components of the system controller + * communication driver; specifically pass in a sizable buffer that + * can be used for allocation of subchannel queues as new subchannels + * are opened. "buf" points to the buffer, and "len" specifies its + * length. + */ +static inline int +ia64_sn_irtr_init(nasid_t nasid, void *buf, int len) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INIT, + (u64) nasid, (u64) buf, (u64) len, 0, 0, 0); + return (int) rv.status; +} + +/* + * Returns the nasid, subnode & slice corresponding to a SAPIC ID + * + * In: + * arg0 - SN_SAL_GET_SAPIC_INFO + * arg1 - sapicid (lid >> 16) + * Out: + * v0 - nasid + * v1 - subnode + * v2 - slice + */ +static inline u64 +ia64_sn_get_sapic_info(int sapicid, int *nasid, int *subnode, int *slice) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SAPIC_INFO, sapicid, 0, 0, 0, 0, 0, 0); + +/***** BEGIN HACK - temp til old proms no longer supported ********/ + if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) { + if (nasid) *nasid = sapicid & 0xfff; + if (subnode) *subnode = (sapicid >> 13) & 1; + if (slice) *slice = (sapicid >> 12) & 3; + return 0; + } +/***** END HACK *******/ + + if (ret_stuff.status < 0) + return ret_stuff.status; + + if (nasid) *nasid = (int) ret_stuff.v0; + if (subnode) *subnode = (int) ret_stuff.v1; + if (slice) *slice = (int) ret_stuff.v2; + return 0; +} + +/* + * Returns information about the HUB/SHUB. + * In: + * arg0 - SN_SAL_GET_SN_INFO + * arg1 - 0 (other values reserved for future use) + * Out: + * v0 + * [7:0] - shub type (0=shub1, 1=shub2) + * [15:8] - Log2 max number of nodes in entire system (includes + * C-bricks, I-bricks, etc) + * [23:16] - Log2 of nodes per sharing domain + * [31:24] - partition ID + * [39:32] - coherency_id + * [47:40] - regionsize + * v1 + * [15:0] - nasid mask (ex., 0x7ff for 11 bit nasid) + * [23:15] - bit position of low nasid bit + */ +static inline u64 +ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift, + u8 *systemsize, u8 *sharing_domain_size, u8 *partid, u8 *coher, u8 *reg) +{ + struct ia64_sal_retval ret_stuff; + + ret_stuff.status = 0; + ret_stuff.v0 = 0; + ret_stuff.v1 = 0; + ret_stuff.v2 = 0; + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SN_INFO, fc, 0, 0, 0, 0, 0, 0); + +/***** BEGIN HACK - temp til old proms no longer supported ********/ + if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) { + int nasid = get_sapicid() & 0xfff; +#define SH_SHUB_ID_NODES_PER_BIT_MASK 0x001f000000000000UL +#define SH_SHUB_ID_NODES_PER_BIT_SHFT 48 + if (shubtype) *shubtype = 0; + if (nasid_bitmask) *nasid_bitmask = 0x7ff; + if (nasid_shift) *nasid_shift = 38; + if (systemsize) *systemsize = 10; + if (sharing_domain_size) *sharing_domain_size = 8; + if (partid) *partid = ia64_sn_sysctl_partition_get(nasid); + if (coher) *coher = nasid >> 9; + if (reg) *reg = (HUB_L((u64 *) LOCAL_MMR_ADDR(SH1_SHUB_ID)) & SH_SHUB_ID_NODES_PER_BIT_MASK) >> + SH_SHUB_ID_NODES_PER_BIT_SHFT; + return 0; + } +/***** END HACK *******/ + + if (ret_stuff.status < 0) + return ret_stuff.status; + + if (shubtype) *shubtype = ret_stuff.v0 & 0xff; + if (systemsize) *systemsize = (ret_stuff.v0 >> 8) & 0xff; + if (sharing_domain_size) *sharing_domain_size = (ret_stuff.v0 >> 16) & 0xff; + if (partid) *partid = (ret_stuff.v0 >> 24) & 0xff; + if (coher) *coher = (ret_stuff.v0 >> 32) & 0xff; + if (reg) *reg = (ret_stuff.v0 >> 40) & 0xff; + if (nasid_bitmask) *nasid_bitmask = (ret_stuff.v1 & 0xffff); + if (nasid_shift) *nasid_shift = (ret_stuff.v1 >> 16) & 0xff; + return 0; +} + +/* + * This is the access point to the Altix PROM hardware performance + * and status monitoring interface. For info on using this, see + * arch/ia64/include/asm/sn/sn2/sn_hwperf.h + */ +static inline int +ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2, + u64 a3, u64 a4, int *v0) +{ + struct ia64_sal_retval rv; + SAL_CALL_NOLOCK(rv, SN_SAL_HWPERF_OP, (u64)nasid, + opcode, a0, a1, a2, a3, a4); + if (v0) + *v0 = (int) rv.v0; + return (int) rv.status; +} + +static inline int +ia64_sn_ioif_get_pci_topology(u64 buf, u64 len) +{ + struct ia64_sal_retval rv; + SAL_CALL_NOLOCK(rv, SN_SAL_IOIF_GET_PCI_TOPOLOGY, buf, len, 0, 0, 0, 0, 0); + return (int) rv.status; +} + +/* + * BTE error recovery is implemented in SAL + */ +static inline int +ia64_sn_bte_recovery(nasid_t nasid) +{ + struct ia64_sal_retval rv; + + rv.status = 0; + SAL_CALL_NOLOCK(rv, SN_SAL_BTE_RECOVER, (u64)nasid, 0, 0, 0, 0, 0, 0); + if (rv.status == SALRET_NOT_IMPLEMENTED) + return 0; + return (int) rv.status; +} + +static inline int +ia64_sn_is_fake_prom(void) +{ + struct ia64_sal_retval rv; + SAL_CALL_NOLOCK(rv, SN_SAL_FAKE_PROM, 0, 0, 0, 0, 0, 0, 0); + return (rv.status == 0); +} + +static inline int +ia64_sn_get_prom_feature_set(int set, unsigned long *feature_set) +{ + struct ia64_sal_retval rv; + + SAL_CALL_NOLOCK(rv, SN_SAL_GET_PROM_FEATURE_SET, set, 0, 0, 0, 0, 0, 0); + if (rv.status != 0) + return rv.status; + *feature_set = rv.v0; + return 0; +} + +static inline int +ia64_sn_set_os_feature(int feature) +{ + struct ia64_sal_retval rv; + + SAL_CALL_NOLOCK(rv, SN_SAL_SET_OS_FEATURE_SET, feature, 0, 0, 0, 0, 0, 0); + return rv.status; +} + +static inline int +sn_inject_error(u64 paddr, u64 *data, u64 *ecc) +{ + struct ia64_sal_retval ret_stuff; + + ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_INJECT_ERROR, paddr, (u64)data, + (u64)ecc, 0, 0, 0, 0); + return ret_stuff.status; +} + +static inline int +ia64_sn_set_cpu_number(int cpu) +{ + struct ia64_sal_retval rv; + + SAL_CALL_NOLOCK(rv, SN_SAL_SET_CPU_NUMBER, cpu, 0, 0, 0, 0, 0, 0); + return rv.status; +} +static inline int +ia64_sn_kernel_launch_event(void) +{ + struct ia64_sal_retval rv; + SAL_CALL_NOLOCK(rv, SN_SAL_KERNEL_LAUNCH_EVENT, 0, 0, 0, 0, 0, 0, 0); + return rv.status; +} +#endif /* _ASM_IA64_SN_SN_SAL_H */ diff --git a/arch/ia64/include/asm/sn/tioca.h b/arch/ia64/include/asm/sn/tioca.h new file mode 100644 index 000000000000..666222d7f0f6 --- /dev/null +++ b/arch/ia64/include/asm/sn/tioca.h @@ -0,0 +1,596 @@ +#ifndef _ASM_IA64_SN_TIO_TIOCA_H +#define _ASM_IA64_SN_TIO_TIOCA_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. + */ + + +#define TIOCA_PART_NUM 0xE020 +#define TIOCA_MFGR_NUM 0x24 +#define TIOCA_REV_A 0x1 + +/* + * Register layout for TIO:CA. See below for bitmasks for each register. + */ + +struct tioca { + u64 ca_id; /* 0x000000 */ + u64 ca_control1; /* 0x000008 */ + u64 ca_control2; /* 0x000010 */ + u64 ca_status1; /* 0x000018 */ + u64 ca_status2; /* 0x000020 */ + u64 ca_gart_aperature; /* 0x000028 */ + u64 ca_gfx_detach; /* 0x000030 */ + u64 ca_inta_dest_addr; /* 0x000038 */ + u64 ca_intb_dest_addr; /* 0x000040 */ + u64 ca_err_int_dest_addr; /* 0x000048 */ + u64 ca_int_status; /* 0x000050 */ + u64 ca_int_status_alias; /* 0x000058 */ + u64 ca_mult_error; /* 0x000060 */ + u64 ca_mult_error_alias; /* 0x000068 */ + u64 ca_first_error; /* 0x000070 */ + u64 ca_int_mask; /* 0x000078 */ + u64 ca_crm_pkterr_type; /* 0x000080 */ + u64 ca_crm_pkterr_type_alias; /* 0x000088 */ + u64 ca_crm_ct_error_detail_1; /* 0x000090 */ + u64 ca_crm_ct_error_detail_2; /* 0x000098 */ + u64 ca_crm_tnumto; /* 0x0000A0 */ + u64 ca_gart_err; /* 0x0000A8 */ + u64 ca_pcierr_type; /* 0x0000B0 */ + u64 ca_pcierr_addr; /* 0x0000B8 */ + + u64 ca_pad_0000C0[3]; /* 0x0000{C0..D0} */ + + u64 ca_pci_rd_buf_flush; /* 0x0000D8 */ + u64 ca_pci_dma_addr_extn; /* 0x0000E0 */ + u64 ca_agp_dma_addr_extn; /* 0x0000E8 */ + u64 ca_force_inta; /* 0x0000F0 */ + u64 ca_force_intb; /* 0x0000F8 */ + u64 ca_debug_vector_sel; /* 0x000100 */ + u64 ca_debug_mux_core_sel; /* 0x000108 */ + u64 ca_debug_mux_pci_sel; /* 0x000110 */ + u64 ca_debug_domain_sel; /* 0x000118 */ + + u64 ca_pad_000120[28]; /* 0x0001{20..F8} */ + + u64 ca_gart_ptr_table; /* 0x200 */ + u64 ca_gart_tlb_addr[8]; /* 0x2{08..40} */ +}; + +/* + * Mask/shift definitions for TIO:CA registers. The convention here is + * to mainly use the names as they appear in the "TIO AEGIS Programmers' + * Reference" with a CA_ prefix added. Some exceptions were made to fix + * duplicate field names or to generalize fields that are common to + * different registers (ca_debug_mux_core_sel and ca_debug_mux_pci_sel for + * example). + * + * Fields consisting of a single bit have a single #define have a single + * macro declaration to mask the bit. Fields consisting of multiple bits + * have two declarations: one to mask the proper bits in a register, and + * a second with the suffix "_SHFT" to identify how far the mask needs to + * be shifted right to get its base value. + */ + +/* ==== ca_control1 */ +#define CA_SYS_BIG_END (1ull << 0) +#define CA_DMA_AGP_SWAP (1ull << 1) +#define CA_DMA_PCI_SWAP (1ull << 2) +#define CA_PIO_IO_SWAP (1ull << 3) +#define CA_PIO_MEM_SWAP (1ull << 4) +#define CA_GFX_WR_SWAP (1ull << 5) +#define CA_AGP_FW_ENABLE (1ull << 6) +#define CA_AGP_CAL_CYCLE (0x7ull << 7) +#define CA_AGP_CAL_CYCLE_SHFT 7 +#define CA_AGP_CAL_PRSCL_BYP (1ull << 10) +#define CA_AGP_INIT_CAL_ENB (1ull << 11) +#define CA_INJ_ADDR_PERR (1ull << 12) +#define CA_INJ_DATA_PERR (1ull << 13) + /* bits 15:14 unused */ +#define CA_PCIM_IO_NBE_AD (0x7ull << 16) +#define CA_PCIM_IO_NBE_AD_SHFT 16 +#define CA_PCIM_FAST_BTB_ENB (1ull << 19) + /* bits 23:20 unused */ +#define CA_PIO_ADDR_OFFSET (0xffull << 24) +#define CA_PIO_ADDR_OFFSET_SHFT 24 + /* bits 35:32 unused */ +#define CA_AGPDMA_OP_COMBDELAY (0x1full << 36) +#define CA_AGPDMA_OP_COMBDELAY_SHFT 36 + /* bit 41 unused */ +#define CA_AGPDMA_OP_ENB_COMBDELAY (1ull << 42) +#define CA_PCI_INT_LPCNT (0xffull << 44) +#define CA_PCI_INT_LPCNT_SHFT 44 + /* bits 63:52 unused */ + +/* ==== ca_control2 */ +#define CA_AGP_LATENCY_TO (0xffull << 0) +#define CA_AGP_LATENCY_TO_SHFT 0 +#define CA_PCI_LATENCY_TO (0xffull << 8) +#define CA_PCI_LATENCY_TO_SHFT 8 +#define CA_PCI_MAX_RETRY (0x3ffull << 16) +#define CA_PCI_MAX_RETRY_SHFT 16 + /* bits 27:26 unused */ +#define CA_RT_INT_EN (0x3ull << 28) +#define CA_RT_INT_EN_SHFT 28 +#define CA_MSI_INT_ENB (1ull << 30) +#define CA_PCI_ARB_ERR_ENB (1ull << 31) +#define CA_GART_MEM_PARAM (0x3ull << 32) +#define CA_GART_MEM_PARAM_SHFT 32 +#define CA_GART_RD_PREFETCH_ENB (1ull << 34) +#define CA_GART_WR_PREFETCH_ENB (1ull << 35) +#define CA_GART_FLUSH_TLB (1ull << 36) + /* bits 39:37 unused */ +#define CA_CRM_TNUMTO_PERIOD (0x1fffull << 40) +#define CA_CRM_TNUMTO_PERIOD_SHFT 40 + /* bits 55:53 unused */ +#define CA_CRM_TNUMTO_ENB (1ull << 56) +#define CA_CRM_PRESCALER_BYP (1ull << 57) + /* bits 59:58 unused */ +#define CA_CRM_MAX_CREDIT (0x7ull << 60) +#define CA_CRM_MAX_CREDIT_SHFT 60 + /* bit 63 unused */ + +/* ==== ca_status1 */ +#define CA_CORELET_ID (0x3ull << 0) +#define CA_CORELET_ID_SHFT 0 +#define CA_INTA_N (1ull << 2) +#define CA_INTB_N (1ull << 3) +#define CA_CRM_CREDIT_AVAIL (0x7ull << 4) +#define CA_CRM_CREDIT_AVAIL_SHFT 4 + /* bit 7 unused */ +#define CA_CRM_SPACE_AVAIL (0x7full << 8) +#define CA_CRM_SPACE_AVAIL_SHFT 8 + /* bit 15 unused */ +#define CA_GART_TLB_VAL (0xffull << 16) +#define CA_GART_TLB_VAL_SHFT 16 + /* bits 63:24 unused */ + +/* ==== ca_status2 */ +#define CA_GFX_CREDIT_AVAIL (0xffull << 0) +#define CA_GFX_CREDIT_AVAIL_SHFT 0 +#define CA_GFX_OPQ_AVAIL (0xffull << 8) +#define CA_GFX_OPQ_AVAIL_SHFT 8 +#define CA_GFX_WRBUFF_AVAIL (0xffull << 16) +#define CA_GFX_WRBUFF_AVAIL_SHFT 16 +#define CA_ADMA_OPQ_AVAIL (0xffull << 24) +#define CA_ADMA_OPQ_AVAIL_SHFT 24 +#define CA_ADMA_WRBUFF_AVAIL (0xffull << 32) +#define CA_ADMA_WRBUFF_AVAIL_SHFT 32 +#define CA_ADMA_RDBUFF_AVAIL (0x7full << 40) +#define CA_ADMA_RDBUFF_AVAIL_SHFT 40 +#define CA_PCI_PIO_OP_STAT (1ull << 47) +#define CA_PDMA_OPQ_AVAIL (0xfull << 48) +#define CA_PDMA_OPQ_AVAIL_SHFT 48 +#define CA_PDMA_WRBUFF_AVAIL (0xfull << 52) +#define CA_PDMA_WRBUFF_AVAIL_SHFT 52 +#define CA_PDMA_RDBUFF_AVAIL (0x3ull << 56) +#define CA_PDMA_RDBUFF_AVAIL_SHFT 56 + /* bits 63:58 unused */ + +/* ==== ca_gart_aperature */ +#define CA_GART_AP_ENB_AGP (1ull << 0) +#define CA_GART_PAGE_SIZE (1ull << 1) +#define CA_GART_AP_ENB_PCI (1ull << 2) + /* bits 11:3 unused */ +#define CA_GART_AP_SIZE (0x3ffull << 12) +#define CA_GART_AP_SIZE_SHFT 12 +#define CA_GART_AP_BASE (0x3ffffffffffull << 22) +#define CA_GART_AP_BASE_SHFT 22 + +/* ==== ca_inta_dest_addr + ==== ca_intb_dest_addr + ==== ca_err_int_dest_addr */ + /* bits 2:0 unused */ +#define CA_INT_DEST_ADDR (0x7ffffffffffffull << 3) +#define CA_INT_DEST_ADDR_SHFT 3 + /* bits 55:54 unused */ +#define CA_INT_DEST_VECT (0xffull << 56) +#define CA_INT_DEST_VECT_SHFT 56 + +/* ==== ca_int_status */ +/* ==== ca_int_status_alias */ +/* ==== ca_mult_error */ +/* ==== ca_mult_error_alias */ +/* ==== ca_first_error */ +/* ==== ca_int_mask */ +#define CA_PCI_ERR (1ull << 0) + /* bits 3:1 unused */ +#define CA_GART_FETCH_ERR (1ull << 4) +#define CA_GFX_WR_OVFLW (1ull << 5) +#define CA_PIO_REQ_OVFLW (1ull << 6) +#define CA_CRM_PKTERR (1ull << 7) +#define CA_CRM_DVERR (1ull << 8) +#define CA_TNUMTO (1ull << 9) +#define CA_CXM_RSP_CRED_OVFLW (1ull << 10) +#define CA_CXM_REQ_CRED_OVFLW (1ull << 11) +#define CA_PIO_INVALID_ADDR (1ull << 12) +#define CA_PCI_ARB_TO (1ull << 13) +#define CA_AGP_REQ_OFLOW (1ull << 14) +#define CA_SBA_TYPE1_ERR (1ull << 15) + /* bit 16 unused */ +#define CA_INTA (1ull << 17) +#define CA_INTB (1ull << 18) +#define CA_MULT_INTA (1ull << 19) +#define CA_MULT_INTB (1ull << 20) +#define CA_GFX_CREDIT_OVFLW (1ull << 21) + /* bits 63:22 unused */ + +/* ==== ca_crm_pkterr_type */ +/* ==== ca_crm_pkterr_type_alias */ +#define CA_CRM_PKTERR_SBERR_HDR (1ull << 0) +#define CA_CRM_PKTERR_DIDN (1ull << 1) +#define CA_CRM_PKTERR_PACTYPE (1ull << 2) +#define CA_CRM_PKTERR_INV_TNUM (1ull << 3) +#define CA_CRM_PKTERR_ADDR_RNG (1ull << 4) +#define CA_CRM_PKTERR_ADDR_ALGN (1ull << 5) +#define CA_CRM_PKTERR_HDR_PARAM (1ull << 6) +#define CA_CRM_PKTERR_CW_ERR (1ull << 7) +#define CA_CRM_PKTERR_SBERR_NH (1ull << 8) +#define CA_CRM_PKTERR_EARLY_TERM (1ull << 9) +#define CA_CRM_PKTERR_EARLY_TAIL (1ull << 10) +#define CA_CRM_PKTERR_MSSNG_TAIL (1ull << 11) +#define CA_CRM_PKTERR_MSSNG_HDR (1ull << 12) + /* bits 15:13 unused */ +#define CA_FIRST_CRM_PKTERR_SBERR_HDR (1ull << 16) +#define CA_FIRST_CRM_PKTERR_DIDN (1ull << 17) +#define CA_FIRST_CRM_PKTERR_PACTYPE (1ull << 18) +#define CA_FIRST_CRM_PKTERR_INV_TNUM (1ull << 19) +#define CA_FIRST_CRM_PKTERR_ADDR_RNG (1ull << 20) +#define CA_FIRST_CRM_PKTERR_ADDR_ALGN (1ull << 21) +#define CA_FIRST_CRM_PKTERR_HDR_PARAM (1ull << 22) +#define CA_FIRST_CRM_PKTERR_CW_ERR (1ull << 23) +#define CA_FIRST_CRM_PKTERR_SBERR_NH (1ull << 24) +#define CA_FIRST_CRM_PKTERR_EARLY_TERM (1ull << 25) +#define CA_FIRST_CRM_PKTERR_EARLY_TAIL (1ull << 26) +#define CA_FIRST_CRM_PKTERR_MSSNG_TAIL (1ull << 27) +#define CA_FIRST_CRM_PKTERR_MSSNG_HDR (1ull << 28) + /* bits 63:29 unused */ + +/* ==== ca_crm_ct_error_detail_1 */ +#define CA_PKT_TYPE (0xfull << 0) +#define CA_PKT_TYPE_SHFT 0 +#define CA_SRC_ID (0x3ull << 4) +#define CA_SRC_ID_SHFT 4 +#define CA_DATA_SZ (0x3ull << 6) +#define CA_DATA_SZ_SHFT 6 +#define CA_TNUM (0xffull << 8) +#define CA_TNUM_SHFT 8 +#define CA_DW_DATA_EN (0xffull << 16) +#define CA_DW_DATA_EN_SHFT 16 +#define CA_GFX_CRED (0xffull << 24) +#define CA_GFX_CRED_SHFT 24 +#define CA_MEM_RD_PARAM (0x3ull << 32) +#define CA_MEM_RD_PARAM_SHFT 32 +#define CA_PIO_OP (1ull << 34) +#define CA_CW_ERR (1ull << 35) + /* bits 62:36 unused */ +#define CA_VALID (1ull << 63) + +/* ==== ca_crm_ct_error_detail_2 */ + /* bits 2:0 unused */ +#define CA_PKT_ADDR (0x1fffffffffffffull << 3) +#define CA_PKT_ADDR_SHFT 3 + /* bits 63:56 unused */ + +/* ==== ca_crm_tnumto */ +#define CA_CRM_TNUMTO_VAL (0xffull << 0) +#define CA_CRM_TNUMTO_VAL_SHFT 0 +#define CA_CRM_TNUMTO_WR (1ull << 8) + /* bits 63:9 unused */ + +/* ==== ca_gart_err */ +#define CA_GART_ERR_SOURCE (0x3ull << 0) +#define CA_GART_ERR_SOURCE_SHFT 0 + /* bits 3:2 unused */ +#define CA_GART_ERR_ADDR (0xfffffffffull << 4) +#define CA_GART_ERR_ADDR_SHFT 4 + /* bits 63:40 unused */ + +/* ==== ca_pcierr_type */ +#define CA_PCIERR_DATA (0xffffffffull << 0) +#define CA_PCIERR_DATA_SHFT 0 +#define CA_PCIERR_ENB (0xfull << 32) +#define CA_PCIERR_ENB_SHFT 32 +#define CA_PCIERR_CMD (0xfull << 36) +#define CA_PCIERR_CMD_SHFT 36 +#define CA_PCIERR_A64 (1ull << 40) +#define CA_PCIERR_SLV_SERR (1ull << 41) +#define CA_PCIERR_SLV_WR_PERR (1ull << 42) +#define CA_PCIERR_SLV_RD_PERR (1ull << 43) +#define CA_PCIERR_MST_SERR (1ull << 44) +#define CA_PCIERR_MST_WR_PERR (1ull << 45) +#define CA_PCIERR_MST_RD_PERR (1ull << 46) +#define CA_PCIERR_MST_MABT (1ull << 47) +#define CA_PCIERR_MST_TABT (1ull << 48) +#define CA_PCIERR_MST_RETRY_TOUT (1ull << 49) + +#define CA_PCIERR_TYPES \ + (CA_PCIERR_A64|CA_PCIERR_SLV_SERR| \ + CA_PCIERR_SLV_WR_PERR|CA_PCIERR_SLV_RD_PERR| \ + CA_PCIERR_MST_SERR|CA_PCIERR_MST_WR_PERR|CA_PCIERR_MST_RD_PERR| \ + CA_PCIERR_MST_MABT|CA_PCIERR_MST_TABT|CA_PCIERR_MST_RETRY_TOUT) + + /* bits 63:50 unused */ + +/* ==== ca_pci_dma_addr_extn */ +#define CA_UPPER_NODE_OFFSET (0x3full << 0) +#define CA_UPPER_NODE_OFFSET_SHFT 0 + /* bits 7:6 unused */ +#define CA_CHIPLET_ID (0x3ull << 8) +#define CA_CHIPLET_ID_SHFT 8 + /* bits 11:10 unused */ +#define CA_PCI_DMA_NODE_ID (0xffffull << 12) +#define CA_PCI_DMA_NODE_ID_SHFT 12 + /* bits 27:26 unused */ +#define CA_PCI_DMA_PIO_MEM_TYPE (1ull << 28) + /* bits 63:29 unused */ + + +/* ==== ca_agp_dma_addr_extn */ + /* bits 19:0 unused */ +#define CA_AGP_DMA_NODE_ID (0xffffull << 20) +#define CA_AGP_DMA_NODE_ID_SHFT 20 + /* bits 27:26 unused */ +#define CA_AGP_DMA_PIO_MEM_TYPE (1ull << 28) + /* bits 63:29 unused */ + +/* ==== ca_debug_vector_sel */ +#define CA_DEBUG_MN_VSEL (0xfull << 0) +#define CA_DEBUG_MN_VSEL_SHFT 0 +#define CA_DEBUG_PP_VSEL (0xfull << 4) +#define CA_DEBUG_PP_VSEL_SHFT 4 +#define CA_DEBUG_GW_VSEL (0xfull << 8) +#define CA_DEBUG_GW_VSEL_SHFT 8 +#define CA_DEBUG_GT_VSEL (0xfull << 12) +#define CA_DEBUG_GT_VSEL_SHFT 12 +#define CA_DEBUG_PD_VSEL (0xfull << 16) +#define CA_DEBUG_PD_VSEL_SHFT 16 +#define CA_DEBUG_AD_VSEL (0xfull << 20) +#define CA_DEBUG_AD_VSEL_SHFT 20 +#define CA_DEBUG_CX_VSEL (0xfull << 24) +#define CA_DEBUG_CX_VSEL_SHFT 24 +#define CA_DEBUG_CR_VSEL (0xfull << 28) +#define CA_DEBUG_CR_VSEL_SHFT 28 +#define CA_DEBUG_BA_VSEL (0xfull << 32) +#define CA_DEBUG_BA_VSEL_SHFT 32 +#define CA_DEBUG_PE_VSEL (0xfull << 36) +#define CA_DEBUG_PE_VSEL_SHFT 36 +#define CA_DEBUG_BO_VSEL (0xfull << 40) +#define CA_DEBUG_BO_VSEL_SHFT 40 +#define CA_DEBUG_BI_VSEL (0xfull << 44) +#define CA_DEBUG_BI_VSEL_SHFT 44 +#define CA_DEBUG_AS_VSEL (0xfull << 48) +#define CA_DEBUG_AS_VSEL_SHFT 48 +#define CA_DEBUG_PS_VSEL (0xfull << 52) +#define CA_DEBUG_PS_VSEL_SHFT 52 +#define CA_DEBUG_PM_VSEL (0xfull << 56) +#define CA_DEBUG_PM_VSEL_SHFT 56 + /* bits 63:60 unused */ + +/* ==== ca_debug_mux_core_sel */ +/* ==== ca_debug_mux_pci_sel */ +#define CA_DEBUG_MSEL0 (0x7ull << 0) +#define CA_DEBUG_MSEL0_SHFT 0 + /* bit 3 unused */ +#define CA_DEBUG_NSEL0 (0x7ull << 4) +#define CA_DEBUG_NSEL0_SHFT 4 + /* bit 7 unused */ +#define CA_DEBUG_MSEL1 (0x7ull << 8) +#define CA_DEBUG_MSEL1_SHFT 8 + /* bit 11 unused */ +#define CA_DEBUG_NSEL1 (0x7ull << 12) +#define CA_DEBUG_NSEL1_SHFT 12 + /* bit 15 unused */ +#define CA_DEBUG_MSEL2 (0x7ull << 16) +#define CA_DEBUG_MSEL2_SHFT 16 + /* bit 19 unused */ +#define CA_DEBUG_NSEL2 (0x7ull << 20) +#define CA_DEBUG_NSEL2_SHFT 20 + /* bit 23 unused */ +#define CA_DEBUG_MSEL3 (0x7ull << 24) +#define CA_DEBUG_MSEL3_SHFT 24 + /* bit 27 unused */ +#define CA_DEBUG_NSEL3 (0x7ull << 28) +#define CA_DEBUG_NSEL3_SHFT 28 + /* bit 31 unused */ +#define CA_DEBUG_MSEL4 (0x7ull << 32) +#define CA_DEBUG_MSEL4_SHFT 32 + /* bit 35 unused */ +#define CA_DEBUG_NSEL4 (0x7ull << 36) +#define CA_DEBUG_NSEL4_SHFT 36 + /* bit 39 unused */ +#define CA_DEBUG_MSEL5 (0x7ull << 40) +#define CA_DEBUG_MSEL5_SHFT 40 + /* bit 43 unused */ +#define CA_DEBUG_NSEL5 (0x7ull << 44) +#define CA_DEBUG_NSEL5_SHFT 44 + /* bit 47 unused */ +#define CA_DEBUG_MSEL6 (0x7ull << 48) +#define CA_DEBUG_MSEL6_SHFT 48 + /* bit 51 unused */ +#define CA_DEBUG_NSEL6 (0x7ull << 52) +#define CA_DEBUG_NSEL6_SHFT 52 + /* bit 55 unused */ +#define CA_DEBUG_MSEL7 (0x7ull << 56) +#define CA_DEBUG_MSEL7_SHFT 56 + /* bit 59 unused */ +#define CA_DEBUG_NSEL7 (0x7ull << 60) +#define CA_DEBUG_NSEL7_SHFT 60 + /* bit 63 unused */ + + +/* ==== ca_debug_domain_sel */ +#define CA_DEBUG_DOMAIN_L (1ull << 0) +#define CA_DEBUG_DOMAIN_H (1ull << 1) + /* bits 63:2 unused */ + +/* ==== ca_gart_ptr_table */ +#define CA_GART_PTR_VAL (1ull << 0) + /* bits 11:1 unused */ +#define CA_GART_PTR_ADDR (0xfffffffffffull << 12) +#define CA_GART_PTR_ADDR_SHFT 12 + /* bits 63:56 unused */ + +/* ==== ca_gart_tlb_addr[0-7] */ +#define CA_GART_TLB_ADDR (0xffffffffffffffull << 0) +#define CA_GART_TLB_ADDR_SHFT 0 + /* bits 62:56 unused */ +#define CA_GART_TLB_ENTRY_VAL (1ull << 63) + +/* + * PIO address space ranges for TIO:CA + */ + +/* CA internal registers */ +#define CA_PIO_ADMIN 0x00000000 +#define CA_PIO_ADMIN_LEN 0x00010000 + +/* GFX Write Buffer - Diagnostics */ +#define CA_PIO_GFX 0x00010000 +#define CA_PIO_GFX_LEN 0x00010000 + +/* AGP DMA Write Buffer - Diagnostics */ +#define CA_PIO_AGP_DMAWRITE 0x00020000 +#define CA_PIO_AGP_DMAWRITE_LEN 0x00010000 + +/* AGP DMA READ Buffer - Diagnostics */ +#define CA_PIO_AGP_DMAREAD 0x00030000 +#define CA_PIO_AGP_DMAREAD_LEN 0x00010000 + +/* PCI Config Type 0 */ +#define CA_PIO_PCI_TYPE0_CONFIG 0x01000000 +#define CA_PIO_PCI_TYPE0_CONFIG_LEN 0x01000000 + +/* PCI Config Type 1 */ +#define CA_PIO_PCI_TYPE1_CONFIG 0x02000000 +#define CA_PIO_PCI_TYPE1_CONFIG_LEN 0x01000000 + +/* PCI I/O Cycles - mapped to PCI Address 0x00000000-0x04ffffff */ +#define CA_PIO_PCI_IO 0x03000000 +#define CA_PIO_PCI_IO_LEN 0x05000000 + +/* PCI MEM Cycles - mapped to PCI with CA_PIO_ADDR_OFFSET of ca_control1 */ +/* use Fast Write if enabled and coretalk packet type is a GFX request */ +#define CA_PIO_PCI_MEM_OFFSET 0x08000000 +#define CA_PIO_PCI_MEM_OFFSET_LEN 0x08000000 + +/* PCI MEM Cycles - mapped to PCI Address 0x00000000-0xbfffffff */ +/* use Fast Write if enabled and coretalk packet type is a GFX request */ +#define CA_PIO_PCI_MEM 0x40000000 +#define CA_PIO_PCI_MEM_LEN 0xc0000000 + +/* + * DMA space + * + * The CA aperature (ie. bus address range) mapped by the GART is segmented into + * two parts. The lower portion of the aperature is used for mapping 32 bit + * PCI addresses which are managed by the dma interfaces in this file. The + * upper poprtion of the aperature is used for mapping 48 bit AGP addresses. + * The AGP portion of the aperature is managed by the agpgart_be.c driver + * in drivers/linux/agp. There are ca-specific hooks in that driver to + * manipulate the gart, but management of the AGP portion of the aperature + * is the responsibility of that driver. + * + * CA allows three main types of DMA mapping: + * + * PCI 64-bit Managed by this driver + * PCI 32-bit Managed by this driver + * AGP 48-bit Managed by hooks in the /dev/agpgart driver + * + * All of the above can optionally be remapped through the GART. The following + * table lists the combinations of addressing types and GART remapping that + * is currently supported by the driver (h/w supports all, s/w limits this): + * + * PCI64 PCI32 AGP48 + * GART no yes yes + * Direct yes yes no + * + * GART remapping of PCI64 is not done because there is no need to. The + * 64 bit PCI address holds all of the information necessary to target any + * memory in the system. + * + * AGP48 is always mapped through the GART. Management of the AGP48 portion + * of the aperature is the responsibility of code in the agpgart_be driver. + * + * The non-64 bit bus address space will currently be partitioned like this: + * + * 0xffff_ffff_ffff +-------- + * | AGP48 direct + * | Space managed by this driver + * CA_AGP_DIRECT_BASE +-------- + * | AGP GART mapped (gfx aperature) + * | Space managed by /dev/agpgart driver + * | This range is exposed to the agpgart + * | driver as the "graphics aperature" + * CA_AGP_MAPPED_BASE +----- + * | PCI GART mapped + * | Space managed by this driver + * CA_PCI32_MAPPED_BASE +---- + * | PCI32 direct + * | Space managed by this driver + * 0xC000_0000 +-------- + * (CA_PCI32_DIRECT_BASE) + * + * The bus address range CA_PCI32_MAPPED_BASE through CA_AGP_DIRECT_BASE + * is what we call the CA aperature. Addresses falling in this range will + * be remapped using the GART. + * + * The bus address range CA_AGP_MAPPED_BASE through CA_AGP_DIRECT_BASE + * is what we call the graphics aperature. This is a subset of the CA + * aperature and is under the control of the agpgart_be driver. + * + * CA_PCI32_MAPPED_BASE, CA_AGP_MAPPED_BASE, and CA_AGP_DIRECT_BASE are + * somewhat arbitrary values. The known constraints on choosing these is: + * + * 1) CA_AGP_DIRECT_BASE-CA_PCI32_MAPPED_BASE+1 (the CA aperature size) + * must be one of the values supported by the ca_gart_aperature register. + * Currently valid values are: 4MB through 4096MB in powers of 2 increments + * + * 2) CA_AGP_DIRECT_BASE-CA_AGP_MAPPED_BASE+1 (the gfx aperature size) + * must be in MB units since that's what the agpgart driver assumes. + */ + +/* + * Define Bus DMA ranges. These are configurable (see constraints above) + * and will probably need tuning based on experience. + */ + + +/* + * 11/24/03 + * CA has an addressing glitch w.r.t. PCI direct 32 bit DMA that makes it + * generally unusable. The problem is that for PCI direct 32 + * DMA's, all 32 bits of the bus address are used to form the lower 32 bits + * of the coretalk address, and coretalk bits 38:32 come from a register. + * Since only PCI bus addresses 0xC0000000-0xFFFFFFFF (1GB) are available + * for DMA (the rest is allocated to PIO), host node addresses need to be + * such that their lower 32 bits fall in the 0xC0000000-0xffffffff range + * as well. So there can be no PCI32 direct DMA below 3GB!! For this + * reason we set the CA_PCI32_DIRECT_SIZE to 0 which essentially makes + * tioca_dma_direct32() a noop but preserves the code flow should this issue + * be fixed in a respin. + * + * For now, all PCI32 DMA's must be mapped through the GART. + */ + +#define CA_PCI32_DIRECT_BASE 0xC0000000UL /* BASE not configurable */ +#define CA_PCI32_DIRECT_SIZE 0x00000000UL /* 0 MB */ + +#define CA_PCI32_MAPPED_BASE 0xC0000000UL +#define CA_PCI32_MAPPED_SIZE 0x40000000UL /* 2GB */ + +#define CA_AGP_MAPPED_BASE 0x80000000UL +#define CA_AGP_MAPPED_SIZE 0x40000000UL /* 2GB */ + +#define CA_AGP_DIRECT_BASE 0x40000000UL /* 2GB */ +#define CA_AGP_DIRECT_SIZE 0x40000000UL + +#define CA_APERATURE_BASE (CA_AGP_MAPPED_BASE) +#define CA_APERATURE_SIZE (CA_AGP_MAPPED_SIZE+CA_PCI32_MAPPED_SIZE) + +#endif /* _ASM_IA64_SN_TIO_TIOCA_H */ diff --git a/arch/ia64/include/asm/sn/tioca_provider.h b/arch/ia64/include/asm/sn/tioca_provider.h new file mode 100644 index 000000000000..9a820ac61be3 --- /dev/null +++ b/arch/ia64/include/asm/sn/tioca_provider.h @@ -0,0 +1,207 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H +#define _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H + +#include + +/* + * WAR enables + * Defines for individual WARs. Each is a bitmask of applicable + * part revision numbers. (1 << 1) == rev A, (1 << 2) == rev B, + * (3 << 1) == (rev A or rev B), etc + */ + +#define TIOCA_WAR_ENABLED(pv, tioca_common) \ + ((1 << tioca_common->ca_rev) & pv) + + /* TIO:ICE:FRZ:Freezer loses a PIO data ucred on PIO RD RSP with CW error */ +#define PV907908 (1 << 1) + /* ATI config space problems after BIOS execution starts */ +#define PV908234 (1 << 1) + /* CA:AGPDMA write request data mismatch with ABC1CL merge */ +#define PV895469 (1 << 1) + /* TIO:CA TLB invalidate of written GART entries possibly not occurring in CA*/ +#define PV910244 (1 << 1) + +struct tioca_dmamap{ + struct list_head cad_list; /* headed by ca_list */ + + dma_addr_t cad_dma_addr; /* Linux dma handle */ + uint cad_gart_entry; /* start entry in ca_gart_pagemap */ + uint cad_gart_size; /* #entries for this map */ +}; + +/* + * Kernel only fields. Prom may look at this stuff for debugging only. + * Access this structure through the ca_kernel_private ptr. + */ + +struct tioca_common ; + +struct tioca_kernel { + struct tioca_common *ca_common; /* tioca this belongs to */ + struct list_head ca_list; /* list of all ca's */ + struct list_head ca_dmamaps; + spinlock_t ca_lock; /* Kernel lock */ + cnodeid_t ca_closest_node; + struct list_head *ca_devices; /* bus->devices */ + + /* + * General GART stuff + */ + u64 ca_ap_size; /* size of aperature in bytes */ + u32 ca_gart_entries; /* # u64 entries in gart */ + u32 ca_ap_pagesize; /* aperature page size in bytes */ + u64 ca_ap_bus_base; /* bus address of CA aperature */ + u64 ca_gart_size; /* gart size in bytes */ + u64 *ca_gart; /* gart table vaddr */ + u64 ca_gart_coretalk_addr; /* gart coretalk addr */ + u8 ca_gart_iscoherent; /* used in tioca_tlbflush */ + + /* PCI GART convenience values */ + u64 ca_pciap_base; /* pci aperature bus base address */ + u64 ca_pciap_size; /* pci aperature size (bytes) */ + u64 ca_pcigart_base; /* gfx GART bus base address */ + u64 *ca_pcigart; /* gfx GART vm address */ + u32 ca_pcigart_entries; + u32 ca_pcigart_start; /* PCI start index in ca_gart */ + void *ca_pcigart_pagemap; + + /* AGP GART convenience values */ + u64 ca_gfxap_base; /* gfx aperature bus base address */ + u64 ca_gfxap_size; /* gfx aperature size (bytes) */ + u64 ca_gfxgart_base; /* gfx GART bus base address */ + u64 *ca_gfxgart; /* gfx GART vm address */ + u32 ca_gfxgart_entries; + u32 ca_gfxgart_start; /* agpgart start index in ca_gart */ +}; + +/* + * Common tioca info shared between kernel and prom + * + * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES + * TO THE PROM VERSION. + */ + +struct tioca_common { + struct pcibus_bussoft ca_common; /* common pciio header */ + + u32 ca_rev; + u32 ca_closest_nasid; + + u64 ca_prom_private; + u64 ca_kernel_private; +}; + +/** + * tioca_paddr_to_gart - Convert an SGI coretalk address to a CA GART entry + * @paddr: page address to convert + * + * Convert a system [coretalk] address to a GART entry. GART entries are + * formed using the following: + * + * data = ( (1<<63) | ( (REMAP_NODE_ID << 40) | (MD_CHIPLET_ID << 38) | + * (REMAP_SYS_ADDR) ) >> 12 ) + * + * DATA written to 1 GART TABLE Entry in system memory is remapped system + * addr for 1 page + * + * The data is for coretalk address format right shifted 12 bits with a + * valid bit. + * + * GART_TABLE_ENTRY [ 25:0 ] -- REMAP_SYS_ADDRESS[37:12]. + * GART_TABLE_ENTRY [ 27:26 ] -- SHUB MD chiplet id. + * GART_TABLE_ENTRY [ 41:28 ] -- REMAP_NODE_ID. + * GART_TABLE_ENTRY [ 63 ] -- Valid Bit + */ +static inline u64 +tioca_paddr_to_gart(unsigned long paddr) +{ + /* + * We are assuming right now that paddr already has the correct + * format since the address from xtalk_dmaXXX should already have + * NODE_ID, CHIPLET_ID, and SYS_ADDR in the correct locations. + */ + + return ((paddr) >> 12) | (1UL << 63); +} + +/** + * tioca_physpage_to_gart - Map a host physical page for SGI CA based DMA + * @page_addr: system page address to map + */ + +static inline unsigned long +tioca_physpage_to_gart(u64 page_addr) +{ + u64 coretalk_addr; + + coretalk_addr = PHYS_TO_TIODMA(page_addr); + if (!coretalk_addr) { + return 0; + } + + return tioca_paddr_to_gart(coretalk_addr); +} + +/** + * tioca_tlbflush - invalidate cached SGI CA GART TLB entries + * @tioca_kernel: CA context + * + * Invalidate tlb entries for a given CA GART. Main complexity is to account + * for revA bug. + */ +static inline void +tioca_tlbflush(struct tioca_kernel *tioca_kernel) +{ + volatile u64 tmp; + volatile struct tioca __iomem *ca_base; + struct tioca_common *tioca_common; + + tioca_common = tioca_kernel->ca_common; + ca_base = (struct tioca __iomem *)tioca_common->ca_common.bs_base; + + /* + * Explicit flushes not needed if GART is in cached mode + */ + if (tioca_kernel->ca_gart_iscoherent) { + if (TIOCA_WAR_ENABLED(PV910244, tioca_common)) { + /* + * PV910244: RevA CA needs explicit flushes. + * Need to put GART into uncached mode before + * flushing otherwise the explicit flush is ignored. + * + * Alternate WAR would be to leave GART cached and + * touch every CL aligned GART entry. + */ + + __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM); + __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB); + __sn_setq_relaxed(&ca_base->ca_control2, + (0x2ull << CA_GART_MEM_PARAM_SHFT)); + tmp = __sn_readq_relaxed(&ca_base->ca_control2); + } + + return; + } + + /* + * Gart in uncached mode ... need an explicit flush. + */ + + __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB); + tmp = __sn_readq_relaxed(&ca_base->ca_control2); +} + +extern u32 tioca_gart_found; +extern struct list_head tioca_list; +extern int tioca_init_provider(void); +extern void tioca_fastwrite_enable(struct tioca_kernel *tioca_kern); +#endif /* _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H */ diff --git a/arch/ia64/include/asm/sn/tioce.h b/arch/ia64/include/asm/sn/tioce.h new file mode 100644 index 000000000000..893468e1b41b --- /dev/null +++ b/arch/ia64/include/asm/sn/tioce.h @@ -0,0 +1,760 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef __ASM_IA64_SN_TIOCE_H__ +#define __ASM_IA64_SN_TIOCE_H__ + +/* CE ASIC part & mfgr information */ +#define TIOCE_PART_NUM 0xCE00 +#define TIOCE_SRC_ID 0x01 +#define TIOCE_REV_A 0x1 + +/* CE Virtual PPB Vendor/Device IDs */ +#define CE_VIRT_PPB_VENDOR_ID 0x10a9 +#define CE_VIRT_PPB_DEVICE_ID 0x4002 + +/* CE Host Bridge Vendor/Device IDs */ +#define CE_HOST_BRIDGE_VENDOR_ID 0x10a9 +#define CE_HOST_BRIDGE_DEVICE_ID 0x4001 + + +#define TIOCE_NUM_M40_ATES 4096 +#define TIOCE_NUM_M3240_ATES 2048 +#define TIOCE_NUM_PORTS 2 + +/* + * Register layout for TIOCE. MMR offsets are shown at the far right of the + * structure definition. + */ +typedef volatile struct tioce { + /* + * ADMIN : Administration Registers + */ + u64 ce_adm_id; /* 0x000000 */ + u64 ce_pad_000008; /* 0x000008 */ + u64 ce_adm_dyn_credit_status; /* 0x000010 */ + u64 ce_adm_last_credit_status; /* 0x000018 */ + u64 ce_adm_credit_limit; /* 0x000020 */ + u64 ce_adm_force_credit; /* 0x000028 */ + u64 ce_adm_control; /* 0x000030 */ + u64 ce_adm_mmr_chn_timeout; /* 0x000038 */ + u64 ce_adm_ssp_ure_timeout; /* 0x000040 */ + u64 ce_adm_ssp_dre_timeout; /* 0x000048 */ + u64 ce_adm_ssp_debug_sel; /* 0x000050 */ + u64 ce_adm_int_status; /* 0x000058 */ + u64 ce_adm_int_status_alias; /* 0x000060 */ + u64 ce_adm_int_mask; /* 0x000068 */ + u64 ce_adm_int_pending; /* 0x000070 */ + u64 ce_adm_force_int; /* 0x000078 */ + u64 ce_adm_ure_ups_buf_barrier_flush; /* 0x000080 */ + u64 ce_adm_int_dest[15]; /* 0x000088 -- 0x0000F8 */ + u64 ce_adm_error_summary; /* 0x000100 */ + u64 ce_adm_error_summary_alias; /* 0x000108 */ + u64 ce_adm_error_mask; /* 0x000110 */ + u64 ce_adm_first_error; /* 0x000118 */ + u64 ce_adm_error_overflow; /* 0x000120 */ + u64 ce_adm_error_overflow_alias; /* 0x000128 */ + u64 ce_pad_000130[2]; /* 0x000130 -- 0x000138 */ + u64 ce_adm_tnum_error; /* 0x000140 */ + u64 ce_adm_mmr_err_detail; /* 0x000148 */ + u64 ce_adm_msg_sram_perr_detail; /* 0x000150 */ + u64 ce_adm_bap_sram_perr_detail; /* 0x000158 */ + u64 ce_adm_ce_sram_perr_detail; /* 0x000160 */ + u64 ce_adm_ce_credit_oflow_detail; /* 0x000168 */ + u64 ce_adm_tx_link_idle_max_timer; /* 0x000170 */ + u64 ce_adm_pcie_debug_sel; /* 0x000178 */ + u64 ce_pad_000180[16]; /* 0x000180 -- 0x0001F8 */ + + u64 ce_adm_pcie_debug_sel_top; /* 0x000200 */ + u64 ce_adm_pcie_debug_lat_sel_lo_top; /* 0x000208 */ + u64 ce_adm_pcie_debug_lat_sel_hi_top; /* 0x000210 */ + u64 ce_adm_pcie_debug_trig_sel_top; /* 0x000218 */ + u64 ce_adm_pcie_debug_trig_lat_sel_lo_top; /* 0x000220 */ + u64 ce_adm_pcie_debug_trig_lat_sel_hi_top; /* 0x000228 */ + u64 ce_adm_pcie_trig_compare_top; /* 0x000230 */ + u64 ce_adm_pcie_trig_compare_en_top; /* 0x000238 */ + u64 ce_adm_ssp_debug_sel_top; /* 0x000240 */ + u64 ce_adm_ssp_debug_lat_sel_lo_top; /* 0x000248 */ + u64 ce_adm_ssp_debug_lat_sel_hi_top; /* 0x000250 */ + u64 ce_adm_ssp_debug_trig_sel_top; /* 0x000258 */ + u64 ce_adm_ssp_debug_trig_lat_sel_lo_top; /* 0x000260 */ + u64 ce_adm_ssp_debug_trig_lat_sel_hi_top; /* 0x000268 */ + u64 ce_adm_ssp_trig_compare_top; /* 0x000270 */ + u64 ce_adm_ssp_trig_compare_en_top; /* 0x000278 */ + u64 ce_pad_000280[48]; /* 0x000280 -- 0x0003F8 */ + + u64 ce_adm_bap_ctrl; /* 0x000400 */ + u64 ce_pad_000408[127]; /* 0x000408 -- 0x0007F8 */ + + u64 ce_msg_buf_data63_0[35]; /* 0x000800 -- 0x000918 */ + u64 ce_pad_000920[29]; /* 0x000920 -- 0x0009F8 */ + + u64 ce_msg_buf_data127_64[35]; /* 0x000A00 -- 0x000B18 */ + u64 ce_pad_000B20[29]; /* 0x000B20 -- 0x000BF8 */ + + u64 ce_msg_buf_parity[35]; /* 0x000C00 -- 0x000D18 */ + u64 ce_pad_000D20[29]; /* 0x000D20 -- 0x000DF8 */ + + u64 ce_pad_000E00[576]; /* 0x000E00 -- 0x001FF8 */ + + /* + * LSI : LSI's PCI Express Link Registers (Link#1 and Link#2) + * Link#1 MMRs at start at 0x002000, Link#2 MMRs at 0x003000 + * NOTE: the comment offsets at far right: let 'z' = {2 or 3} + */ + #define ce_lsi(link_num) ce_lsi[link_num-1] + struct ce_lsi_reg { + u64 ce_lsi_lpu_id; /* 0x00z000 */ + u64 ce_lsi_rst; /* 0x00z008 */ + u64 ce_lsi_dbg_stat; /* 0x00z010 */ + u64 ce_lsi_dbg_cfg; /* 0x00z018 */ + u64 ce_lsi_ltssm_ctrl; /* 0x00z020 */ + u64 ce_lsi_lk_stat; /* 0x00z028 */ + u64 ce_pad_00z030[2]; /* 0x00z030 -- 0x00z038 */ + u64 ce_lsi_int_and_stat; /* 0x00z040 */ + u64 ce_lsi_int_mask; /* 0x00z048 */ + u64 ce_pad_00z050[22]; /* 0x00z050 -- 0x00z0F8 */ + u64 ce_lsi_lk_perf_cnt_sel; /* 0x00z100 */ + u64 ce_pad_00z108; /* 0x00z108 */ + u64 ce_lsi_lk_perf_cnt_ctrl; /* 0x00z110 */ + u64 ce_pad_00z118; /* 0x00z118 */ + u64 ce_lsi_lk_perf_cnt1; /* 0x00z120 */ + u64 ce_lsi_lk_perf_cnt1_test; /* 0x00z128 */ + u64 ce_lsi_lk_perf_cnt2; /* 0x00z130 */ + u64 ce_lsi_lk_perf_cnt2_test; /* 0x00z138 */ + u64 ce_pad_00z140[24]; /* 0x00z140 -- 0x00z1F8 */ + u64 ce_lsi_lk_lyr_cfg; /* 0x00z200 */ + u64 ce_lsi_lk_lyr_status; /* 0x00z208 */ + u64 ce_lsi_lk_lyr_int_stat; /* 0x00z210 */ + u64 ce_lsi_lk_ly_int_stat_test; /* 0x00z218 */ + u64 ce_lsi_lk_ly_int_stat_mask; /* 0x00z220 */ + u64 ce_pad_00z228[3]; /* 0x00z228 -- 0x00z238 */ + u64 ce_lsi_fc_upd_ctl; /* 0x00z240 */ + u64 ce_pad_00z248[3]; /* 0x00z248 -- 0x00z258 */ + u64 ce_lsi_flw_ctl_upd_to_timer; /* 0x00z260 */ + u64 ce_lsi_flw_ctl_upd_timer0; /* 0x00z268 */ + u64 ce_lsi_flw_ctl_upd_timer1; /* 0x00z270 */ + u64 ce_pad_00z278[49]; /* 0x00z278 -- 0x00z3F8 */ + u64 ce_lsi_freq_nak_lat_thrsh; /* 0x00z400 */ + u64 ce_lsi_ack_nak_lat_tmr; /* 0x00z408 */ + u64 ce_lsi_rply_tmr_thr; /* 0x00z410 */ + u64 ce_lsi_rply_tmr; /* 0x00z418 */ + u64 ce_lsi_rply_num_stat; /* 0x00z420 */ + u64 ce_lsi_rty_buf_max_addr; /* 0x00z428 */ + u64 ce_lsi_rty_fifo_ptr; /* 0x00z430 */ + u64 ce_lsi_rty_fifo_rd_wr_ptr; /* 0x00z438 */ + u64 ce_lsi_rty_fifo_cred; /* 0x00z440 */ + u64 ce_lsi_seq_cnt; /* 0x00z448 */ + u64 ce_lsi_ack_sent_seq_num; /* 0x00z450 */ + u64 ce_lsi_seq_cnt_fifo_max_addr; /* 0x00z458 */ + u64 ce_lsi_seq_cnt_fifo_ptr; /* 0x00z460 */ + u64 ce_lsi_seq_cnt_rd_wr_ptr; /* 0x00z468 */ + u64 ce_lsi_tx_lk_ts_ctl; /* 0x00z470 */ + u64 ce_pad_00z478; /* 0x00z478 */ + u64 ce_lsi_mem_addr_ctl; /* 0x00z480 */ + u64 ce_lsi_mem_d_ld0; /* 0x00z488 */ + u64 ce_lsi_mem_d_ld1; /* 0x00z490 */ + u64 ce_lsi_mem_d_ld2; /* 0x00z498 */ + u64 ce_lsi_mem_d_ld3; /* 0x00z4A0 */ + u64 ce_lsi_mem_d_ld4; /* 0x00z4A8 */ + u64 ce_pad_00z4B0[2]; /* 0x00z4B0 -- 0x00z4B8 */ + u64 ce_lsi_rty_d_cnt; /* 0x00z4C0 */ + u64 ce_lsi_seq_buf_cnt; /* 0x00z4C8 */ + u64 ce_lsi_seq_buf_bt_d; /* 0x00z4D0 */ + u64 ce_pad_00z4D8; /* 0x00z4D8 */ + u64 ce_lsi_ack_lat_thr; /* 0x00z4E0 */ + u64 ce_pad_00z4E8[3]; /* 0x00z4E8 -- 0x00z4F8 */ + u64 ce_lsi_nxt_rcv_seq_1_cntr; /* 0x00z500 */ + u64 ce_lsi_unsp_dllp_rcvd; /* 0x00z508 */ + u64 ce_lsi_rcv_lk_ts_ctl; /* 0x00z510 */ + u64 ce_pad_00z518[29]; /* 0x00z518 -- 0x00z5F8 */ + u64 ce_lsi_phy_lyr_cfg; /* 0x00z600 */ + u64 ce_pad_00z608; /* 0x00z608 */ + u64 ce_lsi_phy_lyr_int_stat; /* 0x00z610 */ + u64 ce_lsi_phy_lyr_int_stat_test; /* 0x00z618 */ + u64 ce_lsi_phy_lyr_int_mask; /* 0x00z620 */ + u64 ce_pad_00z628[11]; /* 0x00z628 -- 0x00z678 */ + u64 ce_lsi_rcv_phy_cfg; /* 0x00z680 */ + u64 ce_lsi_rcv_phy_stat1; /* 0x00z688 */ + u64 ce_lsi_rcv_phy_stat2; /* 0x00z690 */ + u64 ce_lsi_rcv_phy_stat3; /* 0x00z698 */ + u64 ce_lsi_rcv_phy_int_stat; /* 0x00z6A0 */ + u64 ce_lsi_rcv_phy_int_stat_test; /* 0x00z6A8 */ + u64 ce_lsi_rcv_phy_int_mask; /* 0x00z6B0 */ + u64 ce_pad_00z6B8[9]; /* 0x00z6B8 -- 0x00z6F8 */ + u64 ce_lsi_tx_phy_cfg; /* 0x00z700 */ + u64 ce_lsi_tx_phy_stat; /* 0x00z708 */ + u64 ce_lsi_tx_phy_int_stat; /* 0x00z710 */ + u64 ce_lsi_tx_phy_int_stat_test; /* 0x00z718 */ + u64 ce_lsi_tx_phy_int_mask; /* 0x00z720 */ + u64 ce_lsi_tx_phy_stat2; /* 0x00z728 */ + u64 ce_pad_00z730[10]; /* 0x00z730 -- 0x00z77F */ + u64 ce_lsi_ltssm_cfg1; /* 0x00z780 */ + u64 ce_lsi_ltssm_cfg2; /* 0x00z788 */ + u64 ce_lsi_ltssm_cfg3; /* 0x00z790 */ + u64 ce_lsi_ltssm_cfg4; /* 0x00z798 */ + u64 ce_lsi_ltssm_cfg5; /* 0x00z7A0 */ + u64 ce_lsi_ltssm_stat1; /* 0x00z7A8 */ + u64 ce_lsi_ltssm_stat2; /* 0x00z7B0 */ + u64 ce_lsi_ltssm_int_stat; /* 0x00z7B8 */ + u64 ce_lsi_ltssm_int_stat_test; /* 0x00z7C0 */ + u64 ce_lsi_ltssm_int_mask; /* 0x00z7C8 */ + u64 ce_lsi_ltssm_stat_wr_en; /* 0x00z7D0 */ + u64 ce_pad_00z7D8[5]; /* 0x00z7D8 -- 0x00z7F8 */ + u64 ce_lsi_gb_cfg1; /* 0x00z800 */ + u64 ce_lsi_gb_cfg2; /* 0x00z808 */ + u64 ce_lsi_gb_cfg3; /* 0x00z810 */ + u64 ce_lsi_gb_cfg4; /* 0x00z818 */ + u64 ce_lsi_gb_stat; /* 0x00z820 */ + u64 ce_lsi_gb_int_stat; /* 0x00z828 */ + u64 ce_lsi_gb_int_stat_test; /* 0x00z830 */ + u64 ce_lsi_gb_int_mask; /* 0x00z838 */ + u64 ce_lsi_gb_pwr_dn1; /* 0x00z840 */ + u64 ce_lsi_gb_pwr_dn2; /* 0x00z848 */ + u64 ce_pad_00z850[246]; /* 0x00z850 -- 0x00zFF8 */ + } ce_lsi[2]; + + u64 ce_pad_004000[10]; /* 0x004000 -- 0x004048 */ + + /* + * CRM: Coretalk Receive Module Registers + */ + u64 ce_crm_debug_mux; /* 0x004050 */ + u64 ce_pad_004058; /* 0x004058 */ + u64 ce_crm_ssp_err_cmd_wrd; /* 0x004060 */ + u64 ce_crm_ssp_err_addr; /* 0x004068 */ + u64 ce_crm_ssp_err_syn; /* 0x004070 */ + + u64 ce_pad_004078[499]; /* 0x004078 -- 0x005008 */ + + /* + * CXM: Coretalk Xmit Module Registers + */ + u64 ce_cxm_dyn_credit_status; /* 0x005010 */ + u64 ce_cxm_last_credit_status; /* 0x005018 */ + u64 ce_cxm_credit_limit; /* 0x005020 */ + u64 ce_cxm_force_credit; /* 0x005028 */ + u64 ce_cxm_disable_bypass; /* 0x005030 */ + u64 ce_pad_005038[3]; /* 0x005038 -- 0x005048 */ + u64 ce_cxm_debug_mux; /* 0x005050 */ + + u64 ce_pad_005058[501]; /* 0x005058 -- 0x005FF8 */ + + /* + * DTL: Downstream Transaction Layer Regs (Link#1 and Link#2) + * DTL: Link#1 MMRs at start at 0x006000, Link#2 MMRs at 0x008000 + * DTL: the comment offsets at far right: let 'y' = {6 or 8} + * + * UTL: Downstream Transaction Layer Regs (Link#1 and Link#2) + * UTL: Link#1 MMRs at start at 0x007000, Link#2 MMRs at 0x009000 + * UTL: the comment offsets at far right: let 'z' = {7 or 9} + */ + #define ce_dtl(link_num) ce_dtl_utl[link_num-1] + #define ce_utl(link_num) ce_dtl_utl[link_num-1] + struct ce_dtl_utl_reg { + /* DTL */ + u64 ce_dtl_dtdr_credit_limit; /* 0x00y000 */ + u64 ce_dtl_dtdr_credit_force; /* 0x00y008 */ + u64 ce_dtl_dyn_credit_status; /* 0x00y010 */ + u64 ce_dtl_dtl_last_credit_stat; /* 0x00y018 */ + u64 ce_dtl_dtl_ctrl; /* 0x00y020 */ + u64 ce_pad_00y028[5]; /* 0x00y028 -- 0x00y048 */ + u64 ce_dtl_debug_sel; /* 0x00y050 */ + u64 ce_pad_00y058[501]; /* 0x00y058 -- 0x00yFF8 */ + + /* UTL */ + u64 ce_utl_utl_ctrl; /* 0x00z000 */ + u64 ce_utl_debug_sel; /* 0x00z008 */ + u64 ce_pad_00z010[510]; /* 0x00z010 -- 0x00zFF8 */ + } ce_dtl_utl[2]; + + u64 ce_pad_00A000[514]; /* 0x00A000 -- 0x00B008 */ + + /* + * URE: Upstream Request Engine + */ + u64 ce_ure_dyn_credit_status; /* 0x00B010 */ + u64 ce_ure_last_credit_status; /* 0x00B018 */ + u64 ce_ure_credit_limit; /* 0x00B020 */ + u64 ce_pad_00B028; /* 0x00B028 */ + u64 ce_ure_control; /* 0x00B030 */ + u64 ce_ure_status; /* 0x00B038 */ + u64 ce_pad_00B040[2]; /* 0x00B040 -- 0x00B048 */ + u64 ce_ure_debug_sel; /* 0x00B050 */ + u64 ce_ure_pcie_debug_sel; /* 0x00B058 */ + u64 ce_ure_ssp_err_cmd_wrd; /* 0x00B060 */ + u64 ce_ure_ssp_err_addr; /* 0x00B068 */ + u64 ce_ure_page_map; /* 0x00B070 */ + u64 ce_ure_dir_map[TIOCE_NUM_PORTS]; /* 0x00B078 */ + u64 ce_ure_pipe_sel1; /* 0x00B088 */ + u64 ce_ure_pipe_mask1; /* 0x00B090 */ + u64 ce_ure_pipe_sel2; /* 0x00B098 */ + u64 ce_ure_pipe_mask2; /* 0x00B0A0 */ + u64 ce_ure_pcie1_credits_sent; /* 0x00B0A8 */ + u64 ce_ure_pcie1_credits_used; /* 0x00B0B0 */ + u64 ce_ure_pcie1_credit_limit; /* 0x00B0B8 */ + u64 ce_ure_pcie2_credits_sent; /* 0x00B0C0 */ + u64 ce_ure_pcie2_credits_used; /* 0x00B0C8 */ + u64 ce_ure_pcie2_credit_limit; /* 0x00B0D0 */ + u64 ce_ure_pcie_force_credit; /* 0x00B0D8 */ + u64 ce_ure_rd_tnum_val; /* 0x00B0E0 */ + u64 ce_ure_rd_tnum_rsp_rcvd; /* 0x00B0E8 */ + u64 ce_ure_rd_tnum_esent_timer; /* 0x00B0F0 */ + u64 ce_ure_rd_tnum_error; /* 0x00B0F8 */ + u64 ce_ure_rd_tnum_first_cl; /* 0x00B100 */ + u64 ce_ure_rd_tnum_link_buf; /* 0x00B108 */ + u64 ce_ure_wr_tnum_val; /* 0x00B110 */ + u64 ce_ure_sram_err_addr0; /* 0x00B118 */ + u64 ce_ure_sram_err_addr1; /* 0x00B120 */ + u64 ce_ure_sram_err_addr2; /* 0x00B128 */ + u64 ce_ure_sram_rd_addr0; /* 0x00B130 */ + u64 ce_ure_sram_rd_addr1; /* 0x00B138 */ + u64 ce_ure_sram_rd_addr2; /* 0x00B140 */ + u64 ce_ure_sram_wr_addr0; /* 0x00B148 */ + u64 ce_ure_sram_wr_addr1; /* 0x00B150 */ + u64 ce_ure_sram_wr_addr2; /* 0x00B158 */ + u64 ce_ure_buf_flush10; /* 0x00B160 */ + u64 ce_ure_buf_flush11; /* 0x00B168 */ + u64 ce_ure_buf_flush12; /* 0x00B170 */ + u64 ce_ure_buf_flush13; /* 0x00B178 */ + u64 ce_ure_buf_flush20; /* 0x00B180 */ + u64 ce_ure_buf_flush21; /* 0x00B188 */ + u64 ce_ure_buf_flush22; /* 0x00B190 */ + u64 ce_ure_buf_flush23; /* 0x00B198 */ + u64 ce_ure_pcie_control1; /* 0x00B1A0 */ + u64 ce_ure_pcie_control2; /* 0x00B1A8 */ + + u64 ce_pad_00B1B0[458]; /* 0x00B1B0 -- 0x00BFF8 */ + + /* Upstream Data Buffer, Port1 */ + struct ce_ure_maint_ups_dat1_data { + u64 data63_0[512]; /* 0x00C000 -- 0x00CFF8 */ + u64 data127_64[512]; /* 0x00D000 -- 0x00DFF8 */ + u64 parity[512]; /* 0x00E000 -- 0x00EFF8 */ + } ce_ure_maint_ups_dat1; + + /* Upstream Header Buffer, Port1 */ + struct ce_ure_maint_ups_hdr1_data { + u64 data63_0[512]; /* 0x00F000 -- 0x00FFF8 */ + u64 data127_64[512]; /* 0x010000 -- 0x010FF8 */ + u64 parity[512]; /* 0x011000 -- 0x011FF8 */ + } ce_ure_maint_ups_hdr1; + + /* Upstream Data Buffer, Port2 */ + struct ce_ure_maint_ups_dat2_data { + u64 data63_0[512]; /* 0x012000 -- 0x012FF8 */ + u64 data127_64[512]; /* 0x013000 -- 0x013FF8 */ + u64 parity[512]; /* 0x014000 -- 0x014FF8 */ + } ce_ure_maint_ups_dat2; + + /* Upstream Header Buffer, Port2 */ + struct ce_ure_maint_ups_hdr2_data { + u64 data63_0[512]; /* 0x015000 -- 0x015FF8 */ + u64 data127_64[512]; /* 0x016000 -- 0x016FF8 */ + u64 parity[512]; /* 0x017000 -- 0x017FF8 */ + } ce_ure_maint_ups_hdr2; + + /* Downstream Data Buffer */ + struct ce_ure_maint_dns_dat_data { + u64 data63_0[512]; /* 0x018000 -- 0x018FF8 */ + u64 data127_64[512]; /* 0x019000 -- 0x019FF8 */ + u64 parity[512]; /* 0x01A000 -- 0x01AFF8 */ + } ce_ure_maint_dns_dat; + + /* Downstream Header Buffer */ + struct ce_ure_maint_dns_hdr_data { + u64 data31_0[64]; /* 0x01B000 -- 0x01B1F8 */ + u64 data95_32[64]; /* 0x01B200 -- 0x01B3F8 */ + u64 parity[64]; /* 0x01B400 -- 0x01B5F8 */ + } ce_ure_maint_dns_hdr; + + /* RCI Buffer Data */ + struct ce_ure_maint_rci_data { + u64 data41_0[64]; /* 0x01B600 -- 0x01B7F8 */ + u64 data69_42[64]; /* 0x01B800 -- 0x01B9F8 */ + } ce_ure_maint_rci; + + /* Response Queue */ + u64 ce_ure_maint_rspq[64]; /* 0x01BA00 -- 0x01BBF8 */ + + u64 ce_pad_01C000[4224]; /* 0x01BC00 -- 0x023FF8 */ + + /* Admin Build-a-Packet Buffer */ + struct ce_adm_maint_bap_buf_data { + u64 data63_0[258]; /* 0x024000 -- 0x024808 */ + u64 data127_64[258]; /* 0x024810 -- 0x025018 */ + u64 parity[258]; /* 0x025020 -- 0x025828 */ + } ce_adm_maint_bap_buf; + + u64 ce_pad_025830[5370]; /* 0x025830 -- 0x02FFF8 */ + + /* URE: 40bit PMU ATE Buffer */ /* 0x030000 -- 0x037FF8 */ + u64 ce_ure_ate40[TIOCE_NUM_M40_ATES]; + + /* URE: 32/40bit PMU ATE Buffer */ /* 0x038000 -- 0x03BFF8 */ + u64 ce_ure_ate3240[TIOCE_NUM_M3240_ATES]; + + u64 ce_pad_03C000[2050]; /* 0x03C000 -- 0x040008 */ + + /* + * DRE: Down Stream Request Engine + */ + u64 ce_dre_dyn_credit_status1; /* 0x040010 */ + u64 ce_dre_dyn_credit_status2; /* 0x040018 */ + u64 ce_dre_last_credit_status1; /* 0x040020 */ + u64 ce_dre_last_credit_status2; /* 0x040028 */ + u64 ce_dre_credit_limit1; /* 0x040030 */ + u64 ce_dre_credit_limit2; /* 0x040038 */ + u64 ce_dre_force_credit1; /* 0x040040 */ + u64 ce_dre_force_credit2; /* 0x040048 */ + u64 ce_dre_debug_mux1; /* 0x040050 */ + u64 ce_dre_debug_mux2; /* 0x040058 */ + u64 ce_dre_ssp_err_cmd_wrd; /* 0x040060 */ + u64 ce_dre_ssp_err_addr; /* 0x040068 */ + u64 ce_dre_comp_err_cmd_wrd; /* 0x040070 */ + u64 ce_dre_comp_err_addr; /* 0x040078 */ + u64 ce_dre_req_status; /* 0x040080 */ + u64 ce_dre_config1; /* 0x040088 */ + u64 ce_dre_config2; /* 0x040090 */ + u64 ce_dre_config_req_status; /* 0x040098 */ + u64 ce_pad_0400A0[12]; /* 0x0400A0 -- 0x0400F8 */ + u64 ce_dre_dyn_fifo; /* 0x040100 */ + u64 ce_pad_040108[3]; /* 0x040108 -- 0x040118 */ + u64 ce_dre_last_fifo; /* 0x040120 */ + + u64 ce_pad_040128[27]; /* 0x040128 -- 0x0401F8 */ + + /* DRE Downstream Head Queue */ + struct ce_dre_maint_ds_head_queue { + u64 data63_0[32]; /* 0x040200 -- 0x0402F8 */ + u64 data127_64[32]; /* 0x040300 -- 0x0403F8 */ + u64 parity[32]; /* 0x040400 -- 0x0404F8 */ + } ce_dre_maint_ds_head_q; + + u64 ce_pad_040500[352]; /* 0x040500 -- 0x040FF8 */ + + /* DRE Downstream Data Queue */ + struct ce_dre_maint_ds_data_queue { + u64 data63_0[256]; /* 0x041000 -- 0x0417F8 */ + u64 ce_pad_041800[256]; /* 0x041800 -- 0x041FF8 */ + u64 data127_64[256]; /* 0x042000 -- 0x0427F8 */ + u64 ce_pad_042800[256]; /* 0x042800 -- 0x042FF8 */ + u64 parity[256]; /* 0x043000 -- 0x0437F8 */ + u64 ce_pad_043800[256]; /* 0x043800 -- 0x043FF8 */ + } ce_dre_maint_ds_data_q; + + /* DRE URE Upstream Response Queue */ + struct ce_dre_maint_ure_us_rsp_queue { + u64 data63_0[8]; /* 0x044000 -- 0x044038 */ + u64 ce_pad_044040[24]; /* 0x044040 -- 0x0440F8 */ + u64 data127_64[8]; /* 0x044100 -- 0x044138 */ + u64 ce_pad_044140[24]; /* 0x044140 -- 0x0441F8 */ + u64 parity[8]; /* 0x044200 -- 0x044238 */ + u64 ce_pad_044240[24]; /* 0x044240 -- 0x0442F8 */ + } ce_dre_maint_ure_us_rsp_q; + + u64 ce_dre_maint_us_wrt_rsp[32];/* 0x044300 -- 0x0443F8 */ + + u64 ce_end_of_struct; /* 0x044400 */ +} tioce_t; + +/* ce_lsiX_gb_cfg1 register bit masks & shifts */ +#define CE_LSI_GB_CFG1_RXL0S_THS_SHFT 0 +#define CE_LSI_GB_CFG1_RXL0S_THS_MASK (0xffULL << 0) +#define CE_LSI_GB_CFG1_RXL0S_SMP_SHFT 8 +#define CE_LSI_GB_CFG1_RXL0S_SMP_MASK (0xfULL << 8); +#define CE_LSI_GB_CFG1_RXL0S_ADJ_SHFT 12 +#define CE_LSI_GB_CFG1_RXL0S_ADJ_MASK (0x7ULL << 12) +#define CE_LSI_GB_CFG1_RXL0S_FLT_SHFT 15 +#define CE_LSI_GB_CFG1_RXL0S_FLT_MASK (0x1ULL << 15) +#define CE_LSI_GB_CFG1_LPBK_SEL_SHFT 16 +#define CE_LSI_GB_CFG1_LPBK_SEL_MASK (0x3ULL << 16) +#define CE_LSI_GB_CFG1_LPBK_EN_SHFT 18 +#define CE_LSI_GB_CFG1_LPBK_EN_MASK (0x1ULL << 18) +#define CE_LSI_GB_CFG1_RVRS_LB_SHFT 19 +#define CE_LSI_GB_CFG1_RVRS_LB_MASK (0x1ULL << 19) +#define CE_LSI_GB_CFG1_RVRS_CLK_SHFT 20 +#define CE_LSI_GB_CFG1_RVRS_CLK_MASK (0x3ULL << 20) +#define CE_LSI_GB_CFG1_SLF_TS_SHFT 24 +#define CE_LSI_GB_CFG1_SLF_TS_MASK (0xfULL << 24) + +/* ce_adm_int_mask/ce_adm_int_status register bit defines */ +#define CE_ADM_INT_CE_ERROR_SHFT 0 +#define CE_ADM_INT_LSI1_IP_ERROR_SHFT 1 +#define CE_ADM_INT_LSI2_IP_ERROR_SHFT 2 +#define CE_ADM_INT_PCIE_ERROR_SHFT 3 +#define CE_ADM_INT_PORT1_HOTPLUG_EVENT_SHFT 4 +#define CE_ADM_INT_PORT2_HOTPLUG_EVENT_SHFT 5 +#define CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT 6 +#define CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT 7 +#define CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT 8 +#define CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT 9 +#define CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT 10 +#define CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT 11 +#define CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT 12 +#define CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT 13 +#define CE_ADM_INT_PCIE_MSG_SHFT 14 /*see int_dest_14*/ +#define CE_ADM_INT_PCIE_MSG_SLOT_0_SHFT 14 +#define CE_ADM_INT_PCIE_MSG_SLOT_1_SHFT 15 +#define CE_ADM_INT_PCIE_MSG_SLOT_2_SHFT 16 +#define CE_ADM_INT_PCIE_MSG_SLOT_3_SHFT 17 +#define CE_ADM_INT_PORT1_PM_PME_MSG_SHFT 22 +#define CE_ADM_INT_PORT2_PM_PME_MSG_SHFT 23 + +/* ce_adm_force_int register bit defines */ +#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT 0 +#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT 1 +#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT 2 +#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT 3 +#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT 4 +#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT 5 +#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT 6 +#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT 7 +#define CE_ADM_FORCE_INT_ALWAYS_SHFT 8 + +/* ce_adm_int_dest register bit masks & shifts */ +#define INTR_VECTOR_SHFT 56 + +/* ce_adm_error_mask and ce_adm_error_summary register bit masks */ +#define CE_ADM_ERR_CRM_SSP_REQ_INVALID (0x1ULL << 0) +#define CE_ADM_ERR_SSP_REQ_HEADER (0x1ULL << 1) +#define CE_ADM_ERR_SSP_RSP_HEADER (0x1ULL << 2) +#define CE_ADM_ERR_SSP_PROTOCOL_ERROR (0x1ULL << 3) +#define CE_ADM_ERR_SSP_SBE (0x1ULL << 4) +#define CE_ADM_ERR_SSP_MBE (0x1ULL << 5) +#define CE_ADM_ERR_CXM_CREDIT_OFLOW (0x1ULL << 6) +#define CE_ADM_ERR_DRE_SSP_REQ_INVAL (0x1ULL << 7) +#define CE_ADM_ERR_SSP_REQ_LONG (0x1ULL << 8) +#define CE_ADM_ERR_SSP_REQ_OFLOW (0x1ULL << 9) +#define CE_ADM_ERR_SSP_REQ_SHORT (0x1ULL << 10) +#define CE_ADM_ERR_SSP_REQ_SIDEBAND (0x1ULL << 11) +#define CE_ADM_ERR_SSP_REQ_ADDR_ERR (0x1ULL << 12) +#define CE_ADM_ERR_SSP_REQ_BAD_BE (0x1ULL << 13) +#define CE_ADM_ERR_PCIE_COMPL_TIMEOUT (0x1ULL << 14) +#define CE_ADM_ERR_PCIE_UNEXP_COMPL (0x1ULL << 15) +#define CE_ADM_ERR_PCIE_ERR_COMPL (0x1ULL << 16) +#define CE_ADM_ERR_DRE_CREDIT_OFLOW (0x1ULL << 17) +#define CE_ADM_ERR_DRE_SRAM_PE (0x1ULL << 18) +#define CE_ADM_ERR_SSP_RSP_INVALID (0x1ULL << 19) +#define CE_ADM_ERR_SSP_RSP_LONG (0x1ULL << 20) +#define CE_ADM_ERR_SSP_RSP_SHORT (0x1ULL << 21) +#define CE_ADM_ERR_SSP_RSP_SIDEBAND (0x1ULL << 22) +#define CE_ADM_ERR_URE_SSP_RSP_UNEXP (0x1ULL << 23) +#define CE_ADM_ERR_URE_SSP_WR_REQ_TIMEOUT (0x1ULL << 24) +#define CE_ADM_ERR_URE_SSP_RD_REQ_TIMEOUT (0x1ULL << 25) +#define CE_ADM_ERR_URE_ATE3240_PAGE_FAULT (0x1ULL << 26) +#define CE_ADM_ERR_URE_ATE40_PAGE_FAULT (0x1ULL << 27) +#define CE_ADM_ERR_URE_CREDIT_OFLOW (0x1ULL << 28) +#define CE_ADM_ERR_URE_SRAM_PE (0x1ULL << 29) +#define CE_ADM_ERR_ADM_SSP_RSP_UNEXP (0x1ULL << 30) +#define CE_ADM_ERR_ADM_SSP_REQ_TIMEOUT (0x1ULL << 31) +#define CE_ADM_ERR_MMR_ACCESS_ERROR (0x1ULL << 32) +#define CE_ADM_ERR_MMR_ADDR_ERROR (0x1ULL << 33) +#define CE_ADM_ERR_ADM_CREDIT_OFLOW (0x1ULL << 34) +#define CE_ADM_ERR_ADM_SRAM_PE (0x1ULL << 35) +#define CE_ADM_ERR_DTL1_MIN_PDATA_CREDIT_ERR (0x1ULL << 36) +#define CE_ADM_ERR_DTL1_INF_COMPL_CRED_UPDT_ERR (0x1ULL << 37) +#define CE_ADM_ERR_DTL1_INF_POSTED_CRED_UPDT_ERR (0x1ULL << 38) +#define CE_ADM_ERR_DTL1_INF_NPOSTED_CRED_UPDT_ERR (0x1ULL << 39) +#define CE_ADM_ERR_DTL1_COMP_HD_CRED_MAX_ERR (0x1ULL << 40) +#define CE_ADM_ERR_DTL1_COMP_D_CRED_MAX_ERR (0x1ULL << 41) +#define CE_ADM_ERR_DTL1_NPOSTED_HD_CRED_MAX_ERR (0x1ULL << 42) +#define CE_ADM_ERR_DTL1_NPOSTED_D_CRED_MAX_ERR (0x1ULL << 43) +#define CE_ADM_ERR_DTL1_POSTED_HD_CRED_MAX_ERR (0x1ULL << 44) +#define CE_ADM_ERR_DTL1_POSTED_D_CRED_MAX_ERR (0x1ULL << 45) +#define CE_ADM_ERR_DTL2_MIN_PDATA_CREDIT_ERR (0x1ULL << 46) +#define CE_ADM_ERR_DTL2_INF_COMPL_CRED_UPDT_ERR (0x1ULL << 47) +#define CE_ADM_ERR_DTL2_INF_POSTED_CRED_UPDT_ERR (0x1ULL << 48) +#define CE_ADM_ERR_DTL2_INF_NPOSTED_CRED_UPDT_ERR (0x1ULL << 49) +#define CE_ADM_ERR_DTL2_COMP_HD_CRED_MAX_ERR (0x1ULL << 50) +#define CE_ADM_ERR_DTL2_COMP_D_CRED_MAX_ERR (0x1ULL << 51) +#define CE_ADM_ERR_DTL2_NPOSTED_HD_CRED_MAX_ERR (0x1ULL << 52) +#define CE_ADM_ERR_DTL2_NPOSTED_D_CRED_MAX_ERR (0x1ULL << 53) +#define CE_ADM_ERR_DTL2_POSTED_HD_CRED_MAX_ERR (0x1ULL << 54) +#define CE_ADM_ERR_DTL2_POSTED_D_CRED_MAX_ERR (0x1ULL << 55) +#define CE_ADM_ERR_PORT1_PCIE_COR_ERR (0x1ULL << 56) +#define CE_ADM_ERR_PORT1_PCIE_NFAT_ERR (0x1ULL << 57) +#define CE_ADM_ERR_PORT1_PCIE_FAT_ERR (0x1ULL << 58) +#define CE_ADM_ERR_PORT2_PCIE_COR_ERR (0x1ULL << 59) +#define CE_ADM_ERR_PORT2_PCIE_NFAT_ERR (0x1ULL << 60) +#define CE_ADM_ERR_PORT2_PCIE_FAT_ERR (0x1ULL << 61) + +/* ce_adm_ure_ups_buf_barrier_flush register bit masks and shifts */ +#define FLUSH_SEL_PORT1_PIPE0_SHFT 0 +#define FLUSH_SEL_PORT1_PIPE1_SHFT 4 +#define FLUSH_SEL_PORT1_PIPE2_SHFT 8 +#define FLUSH_SEL_PORT1_PIPE3_SHFT 12 +#define FLUSH_SEL_PORT2_PIPE0_SHFT 16 +#define FLUSH_SEL_PORT2_PIPE1_SHFT 20 +#define FLUSH_SEL_PORT2_PIPE2_SHFT 24 +#define FLUSH_SEL_PORT2_PIPE3_SHFT 28 + +/* ce_dre_config1 register bit masks and shifts */ +#define CE_DRE_RO_ENABLE (0x1ULL << 0) +#define CE_DRE_DYN_RO_ENABLE (0x1ULL << 1) +#define CE_DRE_SUP_CONFIG_COMP_ERROR (0x1ULL << 2) +#define CE_DRE_SUP_IO_COMP_ERROR (0x1ULL << 3) +#define CE_DRE_ADDR_MODE_SHFT 4 + +/* ce_dre_config_req_status register bit masks */ +#define CE_DRE_LAST_CONFIG_COMPLETION (0x7ULL << 0) +#define CE_DRE_DOWNSTREAM_CONFIG_ERROR (0x1ULL << 3) +#define CE_DRE_CONFIG_COMPLETION_VALID (0x1ULL << 4) +#define CE_DRE_CONFIG_REQUEST_ACTIVE (0x1ULL << 5) + +/* ce_ure_control register bit masks & shifts */ +#define CE_URE_RD_MRG_ENABLE (0x1ULL << 0) +#define CE_URE_WRT_MRG_ENABLE1 (0x1ULL << 4) +#define CE_URE_WRT_MRG_ENABLE2 (0x1ULL << 5) +#define CE_URE_WRT_MRG_TIMER_SHFT 12 +#define CE_URE_WRT_MRG_TIMER_MASK (0x7FFULL << CE_URE_WRT_MRG_TIMER_SHFT) +#define CE_URE_WRT_MRG_TIMER(x) (((u64)(x) << \ + CE_URE_WRT_MRG_TIMER_SHFT) & \ + CE_URE_WRT_MRG_TIMER_MASK) +#define CE_URE_RSPQ_BYPASS_DISABLE (0x1ULL << 24) +#define CE_URE_UPS_DAT1_PAR_DISABLE (0x1ULL << 32) +#define CE_URE_UPS_HDR1_PAR_DISABLE (0x1ULL << 33) +#define CE_URE_UPS_DAT2_PAR_DISABLE (0x1ULL << 34) +#define CE_URE_UPS_HDR2_PAR_DISABLE (0x1ULL << 35) +#define CE_URE_ATE_PAR_DISABLE (0x1ULL << 36) +#define CE_URE_RCI_PAR_DISABLE (0x1ULL << 37) +#define CE_URE_RSPQ_PAR_DISABLE (0x1ULL << 38) +#define CE_URE_DNS_DAT_PAR_DISABLE (0x1ULL << 39) +#define CE_URE_DNS_HDR_PAR_DISABLE (0x1ULL << 40) +#define CE_URE_MALFORM_DISABLE (0x1ULL << 44) +#define CE_URE_UNSUP_DISABLE (0x1ULL << 45) + +/* ce_ure_page_map register bit masks & shifts */ +#define CE_URE_ATE3240_ENABLE (0x1ULL << 0) +#define CE_URE_ATE40_ENABLE (0x1ULL << 1) +#define CE_URE_PAGESIZE_SHFT 4 +#define CE_URE_PAGESIZE_MASK (0x7ULL << CE_URE_PAGESIZE_SHFT) +#define CE_URE_4K_PAGESIZE (0x0ULL << CE_URE_PAGESIZE_SHFT) +#define CE_URE_16K_PAGESIZE (0x1ULL << CE_URE_PAGESIZE_SHFT) +#define CE_URE_64K_PAGESIZE (0x2ULL << CE_URE_PAGESIZE_SHFT) +#define CE_URE_128K_PAGESIZE (0x3ULL << CE_URE_PAGESIZE_SHFT) +#define CE_URE_256K_PAGESIZE (0x4ULL << CE_URE_PAGESIZE_SHFT) + +/* ce_ure_pipe_sel register bit masks & shifts */ +#define PKT_TRAFIC_SHRT 16 +#define BUS_SRC_ID_SHFT 8 +#define DEV_SRC_ID_SHFT 3 +#define FNC_SRC_ID_SHFT 0 +#define CE_URE_TC_MASK (0x07ULL << PKT_TRAFIC_SHRT) +#define CE_URE_BUS_MASK (0xFFULL << BUS_SRC_ID_SHFT) +#define CE_URE_DEV_MASK (0x1FULL << DEV_SRC_ID_SHFT) +#define CE_URE_FNC_MASK (0x07ULL << FNC_SRC_ID_SHFT) +#define CE_URE_PIPE_BUS(b) (((u64)(b) << BUS_SRC_ID_SHFT) & \ + CE_URE_BUS_MASK) +#define CE_URE_PIPE_DEV(d) (((u64)(d) << DEV_SRC_ID_SHFT) & \ + CE_URE_DEV_MASK) +#define CE_URE_PIPE_FNC(f) (((u64)(f) << FNC_SRC_ID_SHFT) & \ + CE_URE_FNC_MASK) + +#define CE_URE_SEL1_SHFT 0 +#define CE_URE_SEL2_SHFT 20 +#define CE_URE_SEL3_SHFT 40 +#define CE_URE_SEL1_MASK (0x7FFFFULL << CE_URE_SEL1_SHFT) +#define CE_URE_SEL2_MASK (0x7FFFFULL << CE_URE_SEL2_SHFT) +#define CE_URE_SEL3_MASK (0x7FFFFULL << CE_URE_SEL3_SHFT) + + +/* ce_ure_pipe_mask register bit masks & shifts */ +#define CE_URE_MASK1_SHFT 0 +#define CE_URE_MASK2_SHFT 20 +#define CE_URE_MASK3_SHFT 40 +#define CE_URE_MASK1_MASK (0x7FFFFULL << CE_URE_MASK1_SHFT) +#define CE_URE_MASK2_MASK (0x7FFFFULL << CE_URE_MASK2_SHFT) +#define CE_URE_MASK3_MASK (0x7FFFFULL << CE_URE_MASK3_SHFT) + + +/* ce_ure_pcie_control1 register bit masks & shifts */ +#define CE_URE_SI (0x1ULL << 0) +#define CE_URE_ELAL_SHFT 4 +#define CE_URE_ELAL_MASK (0x7ULL << CE_URE_ELAL_SHFT) +#define CE_URE_ELAL_SET(n) (((u64)(n) << CE_URE_ELAL_SHFT) & \ + CE_URE_ELAL_MASK) +#define CE_URE_ELAL1_SHFT 8 +#define CE_URE_ELAL1_MASK (0x7ULL << CE_URE_ELAL1_SHFT) +#define CE_URE_ELAL1_SET(n) (((u64)(n) << CE_URE_ELAL1_SHFT) & \ + CE_URE_ELAL1_MASK) +#define CE_URE_SCC (0x1ULL << 12) +#define CE_URE_PN1_SHFT 16 +#define CE_URE_PN1_MASK (0xFFULL << CE_URE_PN1_SHFT) +#define CE_URE_PN2_SHFT 24 +#define CE_URE_PN2_MASK (0xFFULL << CE_URE_PN2_SHFT) +#define CE_URE_PN1_SET(n) (((u64)(n) << CE_URE_PN1_SHFT) & \ + CE_URE_PN1_MASK) +#define CE_URE_PN2_SET(n) (((u64)(n) << CE_URE_PN2_SHFT) & \ + CE_URE_PN2_MASK) + +/* ce_ure_pcie_control2 register bit masks & shifts */ +#define CE_URE_ABP (0x1ULL << 0) +#define CE_URE_PCP (0x1ULL << 1) +#define CE_URE_MSP (0x1ULL << 2) +#define CE_URE_AIP (0x1ULL << 3) +#define CE_URE_PIP (0x1ULL << 4) +#define CE_URE_HPS (0x1ULL << 5) +#define CE_URE_HPC (0x1ULL << 6) +#define CE_URE_SPLV_SHFT 7 +#define CE_URE_SPLV_MASK (0xFFULL << CE_URE_SPLV_SHFT) +#define CE_URE_SPLV_SET(n) (((u64)(n) << CE_URE_SPLV_SHFT) & \ + CE_URE_SPLV_MASK) +#define CE_URE_SPLS_SHFT 15 +#define CE_URE_SPLS_MASK (0x3ULL << CE_URE_SPLS_SHFT) +#define CE_URE_SPLS_SET(n) (((u64)(n) << CE_URE_SPLS_SHFT) & \ + CE_URE_SPLS_MASK) +#define CE_URE_PSN1_SHFT 19 +#define CE_URE_PSN1_MASK (0x1FFFULL << CE_URE_PSN1_SHFT) +#define CE_URE_PSN2_SHFT 32 +#define CE_URE_PSN2_MASK (0x1FFFULL << CE_URE_PSN2_SHFT) +#define CE_URE_PSN1_SET(n) (((u64)(n) << CE_URE_PSN1_SHFT) & \ + CE_URE_PSN1_MASK) +#define CE_URE_PSN2_SET(n) (((u64)(n) << CE_URE_PSN2_SHFT) & \ + CE_URE_PSN2_MASK) + +/* + * PIO address space ranges for CE + */ + +/* Local CE Registers Space */ +#define CE_PIO_MMR 0x00000000 +#define CE_PIO_MMR_LEN 0x04000000 + +/* PCI Compatible Config Space */ +#define CE_PIO_CONFIG_SPACE 0x04000000 +#define CE_PIO_CONFIG_SPACE_LEN 0x04000000 + +/* PCI I/O Space Alias */ +#define CE_PIO_IO_SPACE_ALIAS 0x08000000 +#define CE_PIO_IO_SPACE_ALIAS_LEN 0x08000000 + +/* PCI Enhanced Config Space */ +#define CE_PIO_E_CONFIG_SPACE 0x10000000 +#define CE_PIO_E_CONFIG_SPACE_LEN 0x10000000 + +/* PCI I/O Space */ +#define CE_PIO_IO_SPACE 0x100000000 +#define CE_PIO_IO_SPACE_LEN 0x100000000 + +/* PCI MEM Space */ +#define CE_PIO_MEM_SPACE 0x200000000 +#define CE_PIO_MEM_SPACE_LEN TIO_HWIN_SIZE + + +/* + * CE PCI Enhanced Config Space shifts & masks + */ +#define CE_E_CONFIG_BUS_SHFT 20 +#define CE_E_CONFIG_BUS_MASK (0xFF << CE_E_CONFIG_BUS_SHFT) +#define CE_E_CONFIG_DEVICE_SHFT 15 +#define CE_E_CONFIG_DEVICE_MASK (0x1F << CE_E_CONFIG_DEVICE_SHFT) +#define CE_E_CONFIG_FUNC_SHFT 12 +#define CE_E_CONFIG_FUNC_MASK (0x7 << CE_E_CONFIG_FUNC_SHFT) + +#endif /* __ASM_IA64_SN_TIOCE_H__ */ diff --git a/arch/ia64/include/asm/sn/tioce_provider.h b/arch/ia64/include/asm/sn/tioce_provider.h new file mode 100644 index 000000000000..32c32f30b099 --- /dev/null +++ b/arch/ia64/include/asm/sn/tioce_provider.h @@ -0,0 +1,63 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_CE_PROVIDER_H +#define _ASM_IA64_SN_CE_PROVIDER_H + +#include +#include + +/* + * Common TIOCE structure shared between the prom and kernel + * + * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES TO THE + * PROM VERSION. + */ +struct tioce_common { + struct pcibus_bussoft ce_pcibus; /* common pciio header */ + + u32 ce_rev; + u64 ce_kernel_private; + u64 ce_prom_private; +}; + +struct tioce_kernel { + struct tioce_common *ce_common; + spinlock_t ce_lock; + struct list_head ce_dmamap_list; + + u64 ce_ate40_shadow[TIOCE_NUM_M40_ATES]; + u64 ce_ate3240_shadow[TIOCE_NUM_M3240_ATES]; + u32 ce_ate3240_pagesize; + + u8 ce_port1_secondary; + + /* per-port resources */ + struct { + int dirmap_refcnt; + u64 dirmap_shadow; + } ce_port[TIOCE_NUM_PORTS]; +}; + +struct tioce_dmamap { + struct list_head ce_dmamap_list; /* headed by tioce_kernel */ + u32 refcnt; + + u64 nbytes; /* # bytes mapped */ + + u64 ct_start; /* coretalk start address */ + u64 pci_start; /* bus start address */ + + u64 __iomem *ate_hw;/* hw ptr of first ate in map */ + u64 *ate_shadow; /* shadow ptr of firat ate */ + u16 ate_count; /* # ate's in the map */ +}; + +extern int tioce_init_provider(void); + +#endif /* __ASM_IA64_SN_CE_PROVIDER_H */ diff --git a/arch/ia64/include/asm/sn/tiocp.h b/arch/ia64/include/asm/sn/tiocp.h new file mode 100644 index 000000000000..e8ad0bb5b6c5 --- /dev/null +++ b/arch/ia64/include/asm/sn/tiocp.h @@ -0,0 +1,257 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003-2005 Silicon Graphics, Inc. All rights reserved. + */ +#ifndef _ASM_IA64_SN_PCI_TIOCP_H +#define _ASM_IA64_SN_PCI_TIOCP_H + +#define TIOCP_HOST_INTR_ADDR 0x003FFFFFFFFFFFFFUL +#define TIOCP_PCI64_CMDTYPE_MEM (0x1ull << 60) +#define TIOCP_PCI64_CMDTYPE_MSI (0x3ull << 60) + + +/***************************************************************************** + *********************** TIOCP MMR structure mapping *************************** + *****************************************************************************/ + +struct tiocp{ + + /* 0x000000-0x00FFFF -- Local Registers */ + + /* 0x000000-0x000057 -- (Legacy Widget Space) Configuration */ + u64 cp_id; /* 0x000000 */ + u64 cp_stat; /* 0x000008 */ + u64 cp_err_upper; /* 0x000010 */ + u64 cp_err_lower; /* 0x000018 */ + #define cp_err cp_err_lower + u64 cp_control; /* 0x000020 */ + u64 cp_req_timeout; /* 0x000028 */ + u64 cp_intr_upper; /* 0x000030 */ + u64 cp_intr_lower; /* 0x000038 */ + #define cp_intr cp_intr_lower + u64 cp_err_cmdword; /* 0x000040 */ + u64 _pad_000048; /* 0x000048 */ + u64 cp_tflush; /* 0x000050 */ + + /* 0x000058-0x00007F -- Bridge-specific Configuration */ + u64 cp_aux_err; /* 0x000058 */ + u64 cp_resp_upper; /* 0x000060 */ + u64 cp_resp_lower; /* 0x000068 */ + #define cp_resp cp_resp_lower + u64 cp_tst_pin_ctrl; /* 0x000070 */ + u64 cp_addr_lkerr; /* 0x000078 */ + + /* 0x000080-0x00008F -- PMU & MAP */ + u64 cp_dir_map; /* 0x000080 */ + u64 _pad_000088; /* 0x000088 */ + + /* 0x000090-0x00009F -- SSRAM */ + u64 cp_map_fault; /* 0x000090 */ + u64 _pad_000098; /* 0x000098 */ + + /* 0x0000A0-0x0000AF -- Arbitration */ + u64 cp_arb; /* 0x0000A0 */ + u64 _pad_0000A8; /* 0x0000A8 */ + + /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */ + u64 cp_ate_parity_err; /* 0x0000B0 */ + u64 _pad_0000B8; /* 0x0000B8 */ + + /* 0x0000C0-0x0000FF -- PCI/GIO */ + u64 cp_bus_timeout; /* 0x0000C0 */ + u64 cp_pci_cfg; /* 0x0000C8 */ + u64 cp_pci_err_upper; /* 0x0000D0 */ + u64 cp_pci_err_lower; /* 0x0000D8 */ + #define cp_pci_err cp_pci_err_lower + u64 _pad_0000E0[4]; /* 0x0000{E0..F8} */ + + /* 0x000100-0x0001FF -- Interrupt */ + u64 cp_int_status; /* 0x000100 */ + u64 cp_int_enable; /* 0x000108 */ + u64 cp_int_rst_stat; /* 0x000110 */ + u64 cp_int_mode; /* 0x000118 */ + u64 cp_int_device; /* 0x000120 */ + u64 cp_int_host_err; /* 0x000128 */ + u64 cp_int_addr[8]; /* 0x0001{30,,,68} */ + u64 cp_err_int_view; /* 0x000170 */ + u64 cp_mult_int; /* 0x000178 */ + u64 cp_force_always[8]; /* 0x0001{80,,,B8} */ + u64 cp_force_pin[8]; /* 0x0001{C0,,,F8} */ + + /* 0x000200-0x000298 -- Device */ + u64 cp_device[4]; /* 0x0002{00,,,18} */ + u64 _pad_000220[4]; /* 0x0002{20,,,38} */ + u64 cp_wr_req_buf[4]; /* 0x0002{40,,,58} */ + u64 _pad_000260[4]; /* 0x0002{60,,,78} */ + u64 cp_rrb_map[2]; /* 0x0002{80,,,88} */ + #define cp_even_resp cp_rrb_map[0] /* 0x000280 */ + #define cp_odd_resp cp_rrb_map[1] /* 0x000288 */ + u64 cp_resp_status; /* 0x000290 */ + u64 cp_resp_clear; /* 0x000298 */ + + u64 _pad_0002A0[12]; /* 0x0002{A0..F8} */ + + /* 0x000300-0x0003F8 -- Buffer Address Match Registers */ + struct { + u64 upper; /* 0x0003{00,,,F0} */ + u64 lower; /* 0x0003{08,,,F8} */ + } cp_buf_addr_match[16]; + + /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */ + struct { + u64 flush_w_touch; /* 0x000{400,,,5C0} */ + u64 flush_wo_touch; /* 0x000{408,,,5C8} */ + u64 inflight; /* 0x000{410,,,5D0} */ + u64 prefetch; /* 0x000{418,,,5D8} */ + u64 total_pci_retry; /* 0x000{420,,,5E0} */ + u64 max_pci_retry; /* 0x000{428,,,5E8} */ + u64 max_latency; /* 0x000{430,,,5F0} */ + u64 clear_all; /* 0x000{438,,,5F8} */ + } cp_buf_count[8]; + + + /* 0x000600-0x0009FF -- PCI/X registers */ + u64 cp_pcix_bus_err_addr; /* 0x000600 */ + u64 cp_pcix_bus_err_attr; /* 0x000608 */ + u64 cp_pcix_bus_err_data; /* 0x000610 */ + u64 cp_pcix_pio_split_addr; /* 0x000618 */ + u64 cp_pcix_pio_split_attr; /* 0x000620 */ + u64 cp_pcix_dma_req_err_attr; /* 0x000628 */ + u64 cp_pcix_dma_req_err_addr; /* 0x000630 */ + u64 cp_pcix_timeout; /* 0x000638 */ + + u64 _pad_000640[24]; /* 0x000{640,,,6F8} */ + + /* 0x000700-0x000737 -- Debug Registers */ + u64 cp_ct_debug_ctl; /* 0x000700 */ + u64 cp_br_debug_ctl; /* 0x000708 */ + u64 cp_mux3_debug_ctl; /* 0x000710 */ + u64 cp_mux4_debug_ctl; /* 0x000718 */ + u64 cp_mux5_debug_ctl; /* 0x000720 */ + u64 cp_mux6_debug_ctl; /* 0x000728 */ + u64 cp_mux7_debug_ctl; /* 0x000730 */ + + u64 _pad_000738[89]; /* 0x000{738,,,9F8} */ + + /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */ + struct { + u64 cp_buf_addr; /* 0x000{A00,,,AF0} */ + u64 cp_buf_attr; /* 0X000{A08,,,AF8} */ + } cp_pcix_read_buf_64[16]; + + struct { + u64 cp_buf_addr; /* 0x000{B00,,,BE0} */ + u64 cp_buf_attr; /* 0x000{B08,,,BE8} */ + u64 cp_buf_valid; /* 0x000{B10,,,BF0} */ + u64 __pad1; /* 0x000{B18,,,BF8} */ + } cp_pcix_write_buf_64[8]; + + /* End of Local Registers -- Start of Address Map space */ + + char _pad_000c00[0x010000 - 0x000c00]; + + /* 0x010000-0x011FF8 -- Internal ATE RAM (Auto Parity Generation) */ + u64 cp_int_ate_ram[1024]; /* 0x010000-0x011FF8 */ + + char _pad_012000[0x14000 - 0x012000]; + + /* 0x014000-0x015FF8 -- Internal ATE RAM (Manual Parity Generation) */ + u64 cp_int_ate_ram_mp[1024]; /* 0x014000-0x015FF8 */ + + char _pad_016000[0x18000 - 0x016000]; + + /* 0x18000-0x197F8 -- TIOCP Write Request Ram */ + u64 cp_wr_req_lower[256]; /* 0x18000 - 0x187F8 */ + u64 cp_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */ + u64 cp_wr_req_parity[256]; /* 0x19000 - 0x197F8 */ + + char _pad_019800[0x1C000 - 0x019800]; + + /* 0x1C000-0x1EFF8 -- TIOCP Read Response Ram */ + u64 cp_rd_resp_lower[512]; /* 0x1C000 - 0x1CFF8 */ + u64 cp_rd_resp_upper[512]; /* 0x1D000 - 0x1DFF8 */ + u64 cp_rd_resp_parity[512]; /* 0x1E000 - 0x1EFF8 */ + + char _pad_01F000[0x20000 - 0x01F000]; + + /* 0x020000-0x021FFF -- Host Device (CP) Configuration Space (not used) */ + char _pad_020000[0x021000 - 0x20000]; + + /* 0x021000-0x027FFF -- PCI Device Configuration Spaces */ + union { + u8 c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */ + u16 s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */ + u32 l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */ + u64 d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */ + union { + u8 c[0x100 / 1]; + u16 s[0x100 / 2]; + u32 l[0x100 / 4]; + u64 d[0x100 / 8]; + } f[8]; + } cp_type0_cfg_dev[7]; /* 0x02{1000,,,7FFF} */ + + /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */ + union { + u8 c[0x1000 / 1]; /* 0x028000-0x029000 */ + u16 s[0x1000 / 2]; /* 0x028000-0x029000 */ + u32 l[0x1000 / 4]; /* 0x028000-0x029000 */ + u64 d[0x1000 / 8]; /* 0x028000-0x029000 */ + union { + u8 c[0x100 / 1]; + u16 s[0x100 / 2]; + u32 l[0x100 / 4]; + u64 d[0x100 / 8]; + } f[8]; + } cp_type1_cfg; /* 0x028000-0x029000 */ + + char _pad_029000[0x030000-0x029000]; + + /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */ + union { + u8 c[8 / 1]; + u16 s[8 / 2]; + u32 l[8 / 4]; + u64 d[8 / 8]; + } cp_pci_iack; /* 0x030000-0x030007 */ + + char _pad_030007[0x040000-0x030008]; + + /* 0x040000-0x040007 -- PCIX Special Cycle */ + union { + u8 c[8 / 1]; + u16 s[8 / 2]; + u32 l[8 / 4]; + u64 d[8 / 8]; + } cp_pcix_cycle; /* 0x040000-0x040007 */ + + char _pad_040007[0x200000-0x040008]; + + /* 0x200000-0x7FFFFF -- PCI/GIO Device Spaces */ + union { + u8 c[0x100000 / 1]; + u16 s[0x100000 / 2]; + u32 l[0x100000 / 4]; + u64 d[0x100000 / 8]; + } cp_devio_raw[6]; /* 0x200000-0x7FFFFF */ + + #define cp_devio(n) cp_devio_raw[((n)<2)?(n*2):(n+2)] + + char _pad_800000[0xA00000-0x800000]; + + /* 0xA00000-0xBFFFFF -- PCI/GIO Device Spaces w/flush */ + union { + u8 c[0x100000 / 1]; + u16 s[0x100000 / 2]; + u32 l[0x100000 / 4]; + u64 d[0x100000 / 8]; + } cp_devio_raw_flush[6]; /* 0xA00000-0xBFFFFF */ + + #define cp_devio_flush(n) cp_devio_raw_flush[((n)<2)?(n*2):(n+2)] + +}; + +#endif /* _ASM_IA64_SN_PCI_TIOCP_H */ diff --git a/arch/ia64/include/asm/sn/tiocx.h b/arch/ia64/include/asm/sn/tiocx.h new file mode 100644 index 000000000000..d29728492f36 --- /dev/null +++ b/arch/ia64/include/asm/sn/tiocx.h @@ -0,0 +1,72 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2005 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_TIO_TIOCX_H +#define _ASM_IA64_SN_TIO_TIOCX_H + +#ifdef __KERNEL__ + +struct cx_id_s { + unsigned int part_num; + unsigned int mfg_num; + int nasid; +}; + +struct cx_dev { + struct cx_id_s cx_id; + int bt; /* board/blade type */ + void *soft; /* driver specific */ + struct hubdev_info *hubdev; + struct device dev; + struct cx_drv *driver; +}; + +struct cx_device_id { + unsigned int part_num; + unsigned int mfg_num; +}; + +struct cx_drv { + char *name; + const struct cx_device_id *id_table; + struct device_driver driver; + int (*probe) (struct cx_dev * dev, const struct cx_device_id * id); + int (*remove) (struct cx_dev * dev); +}; + +/* create DMA address by stripping AS bits */ +#define TIOCX_DMA_ADDR(a) (u64)((u64)(a) & 0xffffcfffffffffUL) + +#define TIOCX_TO_TIOCX_DMA_ADDR(a) (u64)(((u64)(a) & 0xfffffffff) | \ + ((((u64)(a)) & 0xffffc000000000UL) <<2)) + +#define TIO_CE_ASIC_PARTNUM 0xce00 +#define TIOCX_CORELET 3 + +/* These are taken from tio_mmr_as.h */ +#define TIO_ICE_FRZ_CFG TIO_MMR_ADDR_MOD(0x00000000b0008100UL) +#define TIO_ICE_PMI_TX_CFG TIO_MMR_ADDR_MOD(0x00000000b000b100UL) +#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3 TIO_MMR_ADDR_MOD(0x00000000b000be18UL) +#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3_CREDIT_CNT_MASK 0x000000000000000fUL + +#define to_cx_dev(n) container_of(n, struct cx_dev, dev) +#define to_cx_driver(drv) container_of(drv, struct cx_drv, driver) + +extern struct sn_irq_info *tiocx_irq_alloc(nasid_t, int, int, nasid_t, int); +extern void tiocx_irq_free(struct sn_irq_info *); +extern int cx_device_unregister(struct cx_dev *); +extern int cx_device_register(nasid_t, int, int, struct hubdev_info *, int); +extern int cx_driver_unregister(struct cx_drv *); +extern int cx_driver_register(struct cx_drv *); +extern u64 tiocx_dma_addr(u64 addr); +extern u64 tiocx_swin_base(int nasid); +extern void tiocx_mmr_store(int nasid, u64 offset, u64 value); +extern u64 tiocx_mmr_load(int nasid, u64 offset); + +#endif // __KERNEL__ +#endif // _ASM_IA64_SN_TIO_TIOCX__ diff --git a/arch/ia64/include/asm/sn/types.h b/arch/ia64/include/asm/sn/types.h new file mode 100644 index 000000000000..8e04ee211e59 --- /dev/null +++ b/arch/ia64/include/asm/sn/types.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999,2001-2003 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_IA64_SN_TYPES_H +#define _ASM_IA64_SN_TYPES_H + +#include + +typedef unsigned long cpuid_t; +typedef signed short nasid_t; /* node id in numa-as-id space */ +typedef signed char partid_t; /* partition ID type */ +typedef unsigned int moduleid_t; /* user-visible module number type */ +typedef unsigned int cmoduleid_t; /* kernel compact module id type */ +typedef unsigned char slotid_t; /* slot (blade) within module */ +typedef unsigned char slabid_t; /* slab (asic) within slot */ +typedef u64 nic_t; +typedef unsigned long iopaddr_t; +typedef unsigned long paddr_t; +typedef short cnodeid_t; + +#endif /* _ASM_IA64_SN_TYPES_H */ diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/asm/socket.h new file mode 100644 index 000000000000..d5ef0aa3e312 --- /dev/null +++ b/arch/ia64/include/asm/socket.h @@ -0,0 +1,66 @@ +#ifndef _ASM_IA64_SOCKET_H +#define _ASM_IA64_SOCKET_H + +/* + * Socket related defines. + * + * Based on . + * + * Modified 1998-2000 + * David Mosberger-Tang , Hewlett-Packard Co + */ + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#endif /* _ASM_IA64_SOCKET_H */ diff --git a/arch/ia64/include/asm/sockios.h b/arch/ia64/include/asm/sockios.h new file mode 100644 index 000000000000..15c92468ad38 --- /dev/null +++ b/arch/ia64/include/asm/sockios.h @@ -0,0 +1,20 @@ +#ifndef _ASM_IA64_SOCKIOS_H +#define _ASM_IA64_SOCKIOS_H + +/* + * Socket-level I/O control calls. + * + * Based on . + * + * Modified 1998, 1999 + * David Mosberger-Tang , Hewlett-Packard Co + */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _ASM_IA64_SOCKIOS_H */ diff --git a/arch/ia64/include/asm/sparsemem.h b/arch/ia64/include/asm/sparsemem.h new file mode 100644 index 000000000000..67a7c40ec27f --- /dev/null +++ b/arch/ia64/include/asm/sparsemem.h @@ -0,0 +1,20 @@ +#ifndef _ASM_IA64_SPARSEMEM_H +#define _ASM_IA64_SPARSEMEM_H + +#ifdef CONFIG_SPARSEMEM +/* + * SECTION_SIZE_BITS 2^N: how big each section will be + * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space + */ + +#define SECTION_SIZE_BITS (30) +#define MAX_PHYSMEM_BITS (50) +#ifdef CONFIG_FORCE_MAX_ZONEORDER +#if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS) +#undef SECTION_SIZE_BITS +#define SECTION_SIZE_BITS (CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) +#endif +#endif + +#endif /* CONFIG_SPARSEMEM */ +#endif /* _ASM_IA64_SPARSEMEM_H */ diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h new file mode 100644 index 000000000000..0229fb95fb38 --- /dev/null +++ b/arch/ia64/include/asm/spinlock.h @@ -0,0 +1,220 @@ +#ifndef _ASM_IA64_SPINLOCK_H +#define _ASM_IA64_SPINLOCK_H + +/* + * Copyright (C) 1998-2003 Hewlett-Packard Co + * David Mosberger-Tang + * Copyright (C) 1999 Walt Drummond + * + * This file is used for SMP configurations only. + */ + +#include +#include +#include + +#include +#include +#include + +#define __raw_spin_lock_init(x) ((x)->lock = 0) + +#ifdef ASM_SUPPORTED +/* + * Try to get the lock. If we fail to get the lock, make a non-standard call to + * ia64_spinlock_contention(). We do not use a normal call because that would force all + * callers of __raw_spin_lock() to be non-leaf routines. Instead, ia64_spinlock_contention() is + * carefully coded to touch only those registers that __raw_spin_lock() marks "clobbered". + */ + +#define IA64_SPINLOCK_CLOBBERS "ar.ccv", "ar.pfs", "p14", "p15", "r27", "r28", "r29", "r30", "b6", "memory" + +static inline void +__raw_spin_lock_flags (raw_spinlock_t *lock, unsigned long flags) +{ + register volatile unsigned int *ptr asm ("r31") = &lock->lock; + +#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3) +# ifdef CONFIG_ITANIUM + /* don't use brl on Itanium... */ + asm volatile ("{\n\t" + " mov ar.ccv = r0\n\t" + " mov r28 = ip\n\t" + " mov r30 = 1;;\n\t" + "}\n\t" + "cmpxchg4.acq r30 = [%1], r30, ar.ccv\n\t" + "movl r29 = ia64_spinlock_contention_pre3_4;;\n\t" + "cmp4.ne p14, p0 = r30, r0\n\t" + "mov b6 = r29;;\n\t" + "mov r27=%2\n\t" + "(p14) br.cond.spnt.many b6" + : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS); +# else + asm volatile ("{\n\t" + " mov ar.ccv = r0\n\t" + " mov r28 = ip\n\t" + " mov r30 = 1;;\n\t" + "}\n\t" + "cmpxchg4.acq r30 = [%1], r30, ar.ccv;;\n\t" + "cmp4.ne p14, p0 = r30, r0\n\t" + "mov r27=%2\n\t" + "(p14) brl.cond.spnt.many ia64_spinlock_contention_pre3_4;;" + : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS); +# endif /* CONFIG_MCKINLEY */ +#else +# ifdef CONFIG_ITANIUM + /* don't use brl on Itanium... */ + /* mis-declare, so we get the entry-point, not it's function descriptor: */ + asm volatile ("mov r30 = 1\n\t" + "mov r27=%2\n\t" + "mov ar.ccv = r0;;\n\t" + "cmpxchg4.acq r30 = [%0], r30, ar.ccv\n\t" + "movl r29 = ia64_spinlock_contention;;\n\t" + "cmp4.ne p14, p0 = r30, r0\n\t" + "mov b6 = r29;;\n\t" + "(p14) br.call.spnt.many b6 = b6" + : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS); +# else + asm volatile ("mov r30 = 1\n\t" + "mov r27=%2\n\t" + "mov ar.ccv = r0;;\n\t" + "cmpxchg4.acq r30 = [%0], r30, ar.ccv;;\n\t" + "cmp4.ne p14, p0 = r30, r0\n\t" + "(p14) brl.call.spnt.many b6=ia64_spinlock_contention;;" + : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS); +# endif /* CONFIG_MCKINLEY */ +#endif +} + +#define __raw_spin_lock(lock) __raw_spin_lock_flags(lock, 0) + +/* Unlock by doing an ordered store and releasing the cacheline with nta */ +static inline void __raw_spin_unlock(raw_spinlock_t *x) { + barrier(); + asm volatile ("st4.rel.nta [%0] = r0\n\t" :: "r"(x)); +} + +#else /* !ASM_SUPPORTED */ +#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) +# define __raw_spin_lock(x) \ +do { \ + __u32 *ia64_spinlock_ptr = (__u32 *) (x); \ + __u64 ia64_spinlock_val; \ + ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0); \ + if (unlikely(ia64_spinlock_val)) { \ + do { \ + while (*ia64_spinlock_ptr) \ + ia64_barrier(); \ + ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0); \ + } while (ia64_spinlock_val); \ + } \ +} while (0) +#define __raw_spin_unlock(x) do { barrier(); ((raw_spinlock_t *) x)->lock = 0; } while (0) +#endif /* !ASM_SUPPORTED */ + +#define __raw_spin_is_locked(x) ((x)->lock != 0) +#define __raw_spin_trylock(x) (cmpxchg_acq(&(x)->lock, 0, 1) == 0) +#define __raw_spin_unlock_wait(lock) \ + do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) + +#define __raw_read_can_lock(rw) (*(volatile int *)(rw) >= 0) +#define __raw_write_can_lock(rw) (*(volatile int *)(rw) == 0) + +#define __raw_read_lock(rw) \ +do { \ + raw_rwlock_t *__read_lock_ptr = (rw); \ + \ + while (unlikely(ia64_fetchadd(1, (int *) __read_lock_ptr, acq) < 0)) { \ + ia64_fetchadd(-1, (int *) __read_lock_ptr, rel); \ + while (*(volatile int *)__read_lock_ptr < 0) \ + cpu_relax(); \ + } \ +} while (0) + +#define __raw_read_unlock(rw) \ +do { \ + raw_rwlock_t *__read_lock_ptr = (rw); \ + ia64_fetchadd(-1, (int *) __read_lock_ptr, rel); \ +} while (0) + +#ifdef ASM_SUPPORTED +#define __raw_write_lock(rw) \ +do { \ + __asm__ __volatile__ ( \ + "mov ar.ccv = r0\n" \ + "dep r29 = -1, r0, 31, 1;;\n" \ + "1:\n" \ + "ld4 r2 = [%0];;\n" \ + "cmp4.eq p0,p7 = r0,r2\n" \ + "(p7) br.cond.spnt.few 1b \n" \ + "cmpxchg4.acq r2 = [%0], r29, ar.ccv;;\n" \ + "cmp4.eq p0,p7 = r0, r2\n" \ + "(p7) br.cond.spnt.few 1b;;\n" \ + :: "r"(rw) : "ar.ccv", "p7", "r2", "r29", "memory"); \ +} while(0) + +#define __raw_write_trylock(rw) \ +({ \ + register long result; \ + \ + __asm__ __volatile__ ( \ + "mov ar.ccv = r0\n" \ + "dep r29 = -1, r0, 31, 1;;\n" \ + "cmpxchg4.acq %0 = [%1], r29, ar.ccv\n" \ + : "=r"(result) : "r"(rw) : "ar.ccv", "r29", "memory"); \ + (result == 0); \ +}) + +static inline void __raw_write_unlock(raw_rwlock_t *x) +{ + u8 *y = (u8 *)x; + barrier(); + asm volatile ("st1.rel.nta [%0] = r0\n\t" :: "r"(y+3) : "memory" ); +} + +#else /* !ASM_SUPPORTED */ + +#define __raw_write_lock(l) \ +({ \ + __u64 ia64_val, ia64_set_val = ia64_dep_mi(-1, 0, 31, 1); \ + __u32 *ia64_write_lock_ptr = (__u32 *) (l); \ + do { \ + while (*ia64_write_lock_ptr) \ + ia64_barrier(); \ + ia64_val = ia64_cmpxchg4_acq(ia64_write_lock_ptr, ia64_set_val, 0); \ + } while (ia64_val); \ +}) + +#define __raw_write_trylock(rw) \ +({ \ + __u64 ia64_val; \ + __u64 ia64_set_val = ia64_dep_mi(-1, 0, 31,1); \ + ia64_val = ia64_cmpxchg4_acq((__u32 *)(rw), ia64_set_val, 0); \ + (ia64_val == 0); \ +}) + +static inline void __raw_write_unlock(raw_rwlock_t *x) +{ + barrier(); + x->write_lock = 0; +} + +#endif /* !ASM_SUPPORTED */ + +static inline int __raw_read_trylock(raw_rwlock_t *x) +{ + union { + raw_rwlock_t lock; + __u32 word; + } old, new; + old.lock = new.lock = *x; + old.lock.write_lock = new.lock.write_lock = 0; + ++new.lock.read_counter; + return (u32)ia64_cmpxchg4_acq((__u32 *)(x), new.word, old.word) == old.word; +} + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* _ASM_IA64_SPINLOCK_H */ diff --git a/arch/ia64/include/asm/spinlock_types.h b/arch/ia64/include/asm/spinlock_types.h new file mode 100644 index 000000000000..474e46f1ab4a --- /dev/null +++ b/arch/ia64/include/asm/spinlock_types.h @@ -0,0 +1,21 @@ +#ifndef _ASM_IA64_SPINLOCK_TYPES_H +#define _ASM_IA64_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct { + volatile unsigned int lock; +} raw_spinlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 0 } + +typedef struct { + volatile unsigned int read_counter : 31; + volatile unsigned int write_lock : 1; +} raw_rwlock_t; + +#define __RAW_RW_LOCK_UNLOCKED { 0, 0 } + +#endif diff --git a/arch/ia64/include/asm/stat.h b/arch/ia64/include/asm/stat.h new file mode 100644 index 000000000000..367bb90cdffa --- /dev/null +++ b/arch/ia64/include/asm/stat.h @@ -0,0 +1,51 @@ +#ifndef _ASM_IA64_STAT_H +#define _ASM_IA64_STAT_H + +/* + * Modified 1998, 1999 + * David Mosberger-Tang , Hewlett-Packard Co + */ + +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned long st_nlink; + unsigned int st_mode; + unsigned int st_uid; + unsigned int st_gid; + unsigned int __pad0; + unsigned long st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long st_blksize; + long st_blocks; + unsigned long __unused[3]; +}; + +#define STAT_HAVE_NSEC 1 + +struct ia64_oldstat { + unsigned int st_dev; + unsigned int st_ino; + unsigned int st_mode; + unsigned int st_nlink; + unsigned int st_uid; + unsigned int st_gid; + unsigned int st_rdev; + unsigned int __pad1; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; + unsigned int st_blksize; + int st_blocks; + unsigned int __unused1; + unsigned int __unused2; +}; + +#endif /* _ASM_IA64_STAT_H */ diff --git a/arch/ia64/include/asm/statfs.h b/arch/ia64/include/asm/statfs.h new file mode 100644 index 000000000000..811097974f31 --- /dev/null +++ b/arch/ia64/include/asm/statfs.h @@ -0,0 +1,62 @@ +#ifndef _ASM_IA64_STATFS_H +#define _ASM_IA64_STATFS_H + +/* + * Based on . + * + * Modified 1998, 1999, 2003 + * David Mosberger-Tang , Hewlett-Packard Co + */ + +#ifndef __KERNEL_STRICT_NAMES +# include +typedef __kernel_fsid_t fsid_t; +#endif + +/* + * This is ugly --- we're already 64-bit, so just duplicate the definitions + */ +struct statfs { + long f_type; + long f_bsize; + long f_blocks; + long f_bfree; + long f_bavail; + long f_files; + long f_ffree; + __kernel_fsid_t f_fsid; + long f_namelen; + long f_frsize; + long f_spare[5]; +}; + + +struct statfs64 { + long f_type; + long f_bsize; + long f_blocks; + long f_bfree; + long f_bavail; + long f_files; + long f_ffree; + __kernel_fsid_t f_fsid; + long f_namelen; + long f_frsize; + long f_spare[5]; +}; + +struct compat_statfs64 { + __u32 f_type; + __u32 f_bsize; + __u64 f_blocks; + __u64 f_bfree; + __u64 f_bavail; + __u64 f_files; + __u64 f_ffree; + __kernel_fsid_t f_fsid; + __u32 f_namelen; + __u32 f_frsize; + __u32 f_spare[5]; +} __attribute__((packed)); + +#endif /* _ASM_IA64_STATFS_H */ diff --git a/arch/ia64/include/asm/string.h b/arch/ia64/include/asm/string.h new file mode 100644 index 000000000000..85fd65c52a8c --- /dev/null +++ b/arch/ia64/include/asm/string.h @@ -0,0 +1,21 @@ +#ifndef _ASM_IA64_STRING_H +#define _ASM_IA64_STRING_H + +/* + * Here is where we want to put optimized versions of the string + * routines. + * + * Copyright (C) 1998-2000, 2002 Hewlett-Packard Co + * David Mosberger-Tang + */ + + +#define __HAVE_ARCH_STRLEN 1 /* see arch/ia64/lib/strlen.S */ +#define __HAVE_ARCH_MEMSET 1 /* see arch/ia64/lib/memset.S */ +#define __HAVE_ARCH_MEMCPY 1 /* see arch/ia64/lib/memcpy.S */ + +extern __kernel_size_t strlen (const char *); +extern void *memcpy (void *, const void *, __kernel_size_t); +extern void *memset (void *, int, __kernel_size_t); + +#endif /* _ASM_IA64_STRING_H */ diff --git a/arch/ia64/include/asm/suspend.h b/arch/ia64/include/asm/suspend.h new file mode 100644 index 000000000000..b05bbb6074e2 --- /dev/null +++ b/arch/ia64/include/asm/suspend.h @@ -0,0 +1 @@ +/* dummy (must be non-empty to prevent prejudicial removal...) */ diff --git a/arch/ia64/include/asm/system.h b/arch/ia64/include/asm/system.h new file mode 100644 index 000000000000..927a381c20ca --- /dev/null +++ b/arch/ia64/include/asm/system.h @@ -0,0 +1,292 @@ +#ifndef _ASM_IA64_SYSTEM_H +#define _ASM_IA64_SYSTEM_H + +/* + * System defines. Note that this is included both from .c and .S + * files, so it does only defines, not any C code. This is based + * on information published in the Processor Abstraction Layer + * and the System Abstraction Layer manual. + * + * Copyright (C) 1998-2003 Hewlett-Packard Co + * David Mosberger-Tang + * Copyright (C) 1999 Asit Mallick + * Copyright (C) 1999 Don Dugger + */ + +#include +#include +#include +#include + +#define GATE_ADDR RGN_BASE(RGN_GATE) + +/* + * 0xa000000000000000+2*PERCPU_PAGE_SIZE + * - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page) + */ +#define KERNEL_START (GATE_ADDR+__IA64_UL_CONST(0x100000000)) +#define PERCPU_ADDR (-PERCPU_PAGE_SIZE) +#define LOAD_OFFSET (KERNEL_START - KERNEL_TR_PAGE_SIZE) + +#ifndef __ASSEMBLY__ + +#include +#include + +#define AT_VECTOR_SIZE_ARCH 2 /* entries in ARCH_DLINFO */ + +struct pci_vector_struct { + __u16 segment; /* PCI Segment number */ + __u16 bus; /* PCI Bus number */ + __u32 pci_id; /* ACPI split 16 bits device, 16 bits function (see section 6.1.1) */ + __u8 pin; /* PCI PIN (0 = A, 1 = B, 2 = C, 3 = D) */ + __u32 irq; /* IRQ assigned */ +}; + +extern struct ia64_boot_param { + __u64 command_line; /* physical address of command line arguments */ + __u64 efi_systab; /* physical address of EFI system table */ + __u64 efi_memmap; /* physical address of EFI memory map */ + __u64 efi_memmap_size; /* size of EFI memory map */ + __u64 efi_memdesc_size; /* size of an EFI memory map descriptor */ + __u32 efi_memdesc_version; /* memory descriptor version */ + struct { + __u16 num_cols; /* number of columns on console output device */ + __u16 num_rows; /* number of rows on console output device */ + __u16 orig_x; /* cursor's x position */ + __u16 orig_y; /* cursor's y position */ + } console_info; + __u64 fpswa; /* physical address of the fpswa interface */ + __u64 initrd_start; + __u64 initrd_size; +} *ia64_boot_param; + +/* + * Macros to force memory ordering. In these descriptions, "previous" + * and "subsequent" refer to program order; "visible" means that all + * architecturally visible effects of a memory access have occurred + * (at a minimum, this means the memory has been read or written). + * + * wmb(): Guarantees that all preceding stores to memory- + * like regions are visible before any subsequent + * stores and that all following stores will be + * visible only after all previous stores. + * rmb(): Like wmb(), but for reads. + * mb(): wmb()/rmb() combo, i.e., all previous memory + * accesses are visible before all subsequent + * accesses and vice versa. This is also known as + * a "fence." + * + * Note: "mb()" and its variants cannot be used as a fence to order + * accesses to memory mapped I/O registers. For that, mf.a needs to + * be used. However, we don't want to always use mf.a because (a) + * it's (presumably) much slower than mf and (b) mf.a is supported for + * sequential memory pages only. + */ +#define mb() ia64_mf() +#define rmb() mb() +#define wmb() mb() +#define read_barrier_depends() do { } while(0) + +#ifdef CONFIG_SMP +# define smp_mb() mb() +# define smp_rmb() rmb() +# define smp_wmb() wmb() +# define smp_read_barrier_depends() read_barrier_depends() +#else +# define smp_mb() barrier() +# define smp_rmb() barrier() +# define smp_wmb() barrier() +# define smp_read_barrier_depends() do { } while(0) +#endif + +/* + * XXX check on this ---I suspect what Linus really wants here is + * acquire vs release semantics but we can't discuss this stuff with + * Linus just yet. Grrr... + */ +#define set_mb(var, value) do { (var) = (value); mb(); } while (0) + +#define safe_halt() ia64_pal_halt_light() /* PAL_HALT_LIGHT */ + +/* + * The group barrier in front of the rsm & ssm are necessary to ensure + * that none of the previous instructions in the same group are + * affected by the rsm/ssm. + */ +/* For spinlocks etc */ + +/* + * - clearing psr.i is implicitly serialized (visible by next insn) + * - setting psr.i requires data serialization + * - we need a stop-bit before reading PSR because we sometimes + * write a floating-point register right before reading the PSR + * and that writes to PSR.mfl + */ +#ifdef CONFIG_PARAVIRT +#define __local_save_flags() ia64_get_psr_i() +#else +#define __local_save_flags() ia64_getreg(_IA64_REG_PSR) +#endif + +#define __local_irq_save(x) \ +do { \ + ia64_stop(); \ + (x) = __local_save_flags(); \ + ia64_stop(); \ + ia64_rsm(IA64_PSR_I); \ +} while (0) + +#define __local_irq_disable() \ +do { \ + ia64_stop(); \ + ia64_rsm(IA64_PSR_I); \ +} while (0) + +#define __local_irq_restore(x) ia64_intrin_local_irq_restore((x) & IA64_PSR_I) + +#ifdef CONFIG_IA64_DEBUG_IRQ + + extern unsigned long last_cli_ip; + +# define __save_ip() last_cli_ip = ia64_getreg(_IA64_REG_IP) + +# define local_irq_save(x) \ +do { \ + unsigned long __psr; \ + \ + __local_irq_save(__psr); \ + if (__psr & IA64_PSR_I) \ + __save_ip(); \ + (x) = __psr; \ +} while (0) + +# define local_irq_disable() do { unsigned long __x; local_irq_save(__x); } while (0) + +# define local_irq_restore(x) \ +do { \ + unsigned long __old_psr, __psr = (x); \ + \ + local_save_flags(__old_psr); \ + __local_irq_restore(__psr); \ + if ((__old_psr & IA64_PSR_I) && !(__psr & IA64_PSR_I)) \ + __save_ip(); \ +} while (0) + +#else /* !CONFIG_IA64_DEBUG_IRQ */ +# define local_irq_save(x) __local_irq_save(x) +# define local_irq_disable() __local_irq_disable() +# define local_irq_restore(x) __local_irq_restore(x) +#endif /* !CONFIG_IA64_DEBUG_IRQ */ + +#define local_irq_enable() ({ ia64_stop(); ia64_ssm(IA64_PSR_I); ia64_srlz_d(); }) +#define local_save_flags(flags) ({ ia64_stop(); (flags) = __local_save_flags(); }) + +#define irqs_disabled() \ +({ \ + unsigned long __ia64_id_flags; \ + local_save_flags(__ia64_id_flags); \ + (__ia64_id_flags & IA64_PSR_I) == 0; \ +}) + +#ifdef __KERNEL__ + +#ifdef CONFIG_IA32_SUPPORT +# define IS_IA32_PROCESS(regs) (ia64_psr(regs)->is != 0) +#else +# define IS_IA32_PROCESS(regs) 0 +struct task_struct; +static inline void ia32_save_state(struct task_struct *t __attribute__((unused))){} +static inline void ia32_load_state(struct task_struct *t __attribute__((unused))){} +#endif + +/* + * Context switch from one thread to another. If the two threads have + * different address spaces, schedule() has already taken care of + * switching to the new address space by calling switch_mm(). + * + * Disabling access to the fph partition and the debug-register + * context switch MUST be done before calling ia64_switch_to() since a + * newly created thread returns directly to + * ia64_ret_from_syscall_clear_r8. + */ +extern struct task_struct *ia64_switch_to (void *next_task); + +struct task_struct; + +extern void ia64_save_extra (struct task_struct *task); +extern void ia64_load_extra (struct task_struct *task); + +#ifdef CONFIG_VIRT_CPU_ACCOUNTING +extern void ia64_account_on_switch (struct task_struct *prev, struct task_struct *next); +# define IA64_ACCOUNT_ON_SWITCH(p,n) ia64_account_on_switch(p,n) +#else +# define IA64_ACCOUNT_ON_SWITCH(p,n) +#endif + +#ifdef CONFIG_PERFMON + DECLARE_PER_CPU(unsigned long, pfm_syst_info); +# define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1) +#else +# define PERFMON_IS_SYSWIDE() (0) +#endif + +#define IA64_HAS_EXTRA_STATE(t) \ + ((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID) \ + || IS_IA32_PROCESS(task_pt_regs(t)) || PERFMON_IS_SYSWIDE()) + +#define __switch_to(prev,next,last) do { \ + IA64_ACCOUNT_ON_SWITCH(prev, next); \ + if (IA64_HAS_EXTRA_STATE(prev)) \ + ia64_save_extra(prev); \ + if (IA64_HAS_EXTRA_STATE(next)) \ + ia64_load_extra(next); \ + ia64_psr(task_pt_regs(next))->dfh = !ia64_is_local_fpu_owner(next); \ + (last) = ia64_switch_to((next)); \ +} while (0) + +#ifdef CONFIG_SMP +/* + * In the SMP case, we save the fph state when context-switching away from a thread that + * modified fph. This way, when the thread gets scheduled on another CPU, the CPU can + * pick up the state from task->thread.fph, avoiding the complication of having to fetch + * the latest fph state from another CPU. In other words: eager save, lazy restore. + */ +# define switch_to(prev,next,last) do { \ + if (ia64_psr(task_pt_regs(prev))->mfh && ia64_is_local_fpu_owner(prev)) { \ + ia64_psr(task_pt_regs(prev))->mfh = 0; \ + (prev)->thread.flags |= IA64_THREAD_FPH_VALID; \ + __ia64_save_fpu((prev)->thread.fph); \ + } \ + __switch_to(prev, next, last); \ + /* "next" in old context is "current" in new context */ \ + if (unlikely((current->thread.flags & IA64_THREAD_MIGRATION) && \ + (task_cpu(current) != \ + task_thread_info(current)->last_cpu))) { \ + platform_migrate(current); \ + task_thread_info(current)->last_cpu = task_cpu(current); \ + } \ +} while (0) +#else +# define switch_to(prev,next,last) __switch_to(prev, next, last) +#endif + +#define __ARCH_WANT_UNLOCKED_CTXSW +#define ARCH_HAS_PREFETCH_SWITCH_STACK +#define ia64_platform_is(x) (strcmp(x, platform_name) == 0) + +void cpu_idle_wait(void); + +#define arch_align_stack(x) (x) + +void default_idle(void); + +#ifdef CONFIG_VIRT_CPU_ACCOUNTING +extern void account_system_vtime(struct task_struct *); +#endif + +#endif /* __KERNEL__ */ + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_IA64_SYSTEM_H */ diff --git a/arch/ia64/include/asm/termbits.h b/arch/ia64/include/asm/termbits.h new file mode 100644 index 000000000000..9f162e0089ad --- /dev/null +++ b/arch/ia64/include/asm/termbits.h @@ -0,0 +1,207 @@ +#ifndef _ASM_IA64_TERMBITS_H +#define _ASM_IA64_TERMBITS_H + +/* + * Based on . + * + * Modified 1999 + * David Mosberger-Tang , Hewlett-Packard Co + * + * 99/01/28 Added new baudrates + */ + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* _ASM_IA64_TERMBITS_H */ diff --git a/arch/ia64/include/asm/termios.h b/arch/ia64/include/asm/termios.h new file mode 100644 index 000000000000..689d218c0c28 --- /dev/null +++ b/arch/ia64/include/asm/termios.h @@ -0,0 +1,97 @@ +#ifndef _ASM_IA64_TERMIOS_H +#define _ASM_IA64_TERMIOS_H + +/* + * Modified 1999 + * David Mosberger-Tang , Hewlett-Packard Co + * + * 99/01/28 Added N_IRDA and N_SMSBLOCK + */ + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +# ifdef __KERNEL__ + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp,&(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) + +# endif /* __KERNEL__ */ + +#endif /* _ASM_IA64_TERMIOS_H */ diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h new file mode 100644 index 000000000000..7c60fcdd2efd --- /dev/null +++ b/arch/ia64/include/asm/thread_info.h @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2002-2003 Hewlett-Packard Co + * David Mosberger-Tang + */ +#ifndef _ASM_IA64_THREAD_INFO_H +#define _ASM_IA64_THREAD_INFO_H + +#ifndef ASM_OFFSETS_C +#include +#endif +#include +#include + +#define PREEMPT_ACTIVE_BIT 30 +#define PREEMPT_ACTIVE (1 << PREEMPT_ACTIVE_BIT) + +#ifndef __ASSEMBLY__ + +/* + * On IA-64, we want to keep the task structure and kernel stack together, so they can be + * mapped by a single TLB entry and so they can be addressed by the "current" pointer + * without having to do pointer masking. + */ +struct thread_info { + struct task_struct *task; /* XXX not really needed, except for dup_task_struct() */ + struct exec_domain *exec_domain;/* execution domain */ + __u32 flags; /* thread_info flags (see TIF_*) */ + __u32 cpu; /* current CPU */ + __u32 last_cpu; /* Last CPU thread ran on */ + __u32 status; /* Thread synchronous flags */ + mm_segment_t addr_limit; /* user-level address space limit */ + int preempt_count; /* 0=premptable, <0=BUG; will also serve as bh-counter */ + struct restart_block restart_block; +#ifdef CONFIG_VIRT_CPU_ACCOUNTING + __u64 ac_stamp; + __u64 ac_leave; + __u64 ac_stime; + __u64 ac_utime; +#endif +}; + +#define THREAD_SIZE KERNEL_STACK_SIZE + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .addr_limit = KERNEL_DS, \ + .preempt_count = 0, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +#ifndef ASM_OFFSETS_C +/* how to get the thread information struct from C */ +#define current_thread_info() ((struct thread_info *) ((char *) current + IA64_TASK_SIZE)) +#define alloc_thread_info(tsk) ((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE)) +#define task_thread_info(tsk) ((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE)) +#else +#define current_thread_info() ((struct thread_info *) 0) +#define alloc_thread_info(tsk) ((struct thread_info *) 0) +#define task_thread_info(tsk) ((struct thread_info *) 0) +#endif +#define free_thread_info(ti) /* nothing */ +#define task_stack_page(tsk) ((void *)(tsk)) + +#define __HAVE_THREAD_FUNCTIONS +#ifdef CONFIG_VIRT_CPU_ACCOUNTING +#define setup_thread_stack(p, org) \ + *task_thread_info(p) = *task_thread_info(org); \ + task_thread_info(p)->ac_stime = 0; \ + task_thread_info(p)->ac_utime = 0; \ + task_thread_info(p)->task = (p); +#else +#define setup_thread_stack(p, org) \ + *task_thread_info(p) = *task_thread_info(org); \ + task_thread_info(p)->task = (p); +#endif +#define end_of_stack(p) (unsigned long *)((void *)(p) + IA64_RBS_OFFSET) + +#define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR +#define alloc_task_struct() ((struct task_struct *)__get_free_pages(GFP_KERNEL | __GFP_COMP, KERNEL_STACK_SIZE_ORDER)) +#define free_task_struct(tsk) free_pages((unsigned long) (tsk), KERNEL_STACK_SIZE_ORDER) + +#define tsk_set_notify_resume(tsk) \ + set_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME) +extern void tsk_clear_notify_resume(struct task_struct *tsk); +#endif /* !__ASSEMBLY */ + +/* + * thread information flags + * - these are process state flags that various assembly files may need to access + * - pending work-to-be-done flags are in least-significant 16 bits, other flags + * in top 16 bits + */ +#define TIF_SIGPENDING 0 /* signal pending */ +#define TIF_NEED_RESCHED 1 /* rescheduling necessary */ +#define TIF_SYSCALL_TRACE 2 /* syscall trace active */ +#define TIF_SYSCALL_AUDIT 3 /* syscall auditing active */ +#define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */ +#define TIF_NOTIFY_RESUME 6 /* resumption notification requested */ +#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 17 +#define TIF_MCA_INIT 18 /* this task is processing MCA or INIT */ +#define TIF_DB_DISABLED 19 /* debug trap disabled for fsyscall */ +#define TIF_FREEZE 20 /* is freezing for suspend */ +#define TIF_RESTORE_RSE 21 /* user RBS is newer than kernel RBS */ + +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) +#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) +#define _TIF_SYSCALL_TRACEAUDIT (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP) +#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) +#define _TIF_MCA_INIT (1 << TIF_MCA_INIT) +#define _TIF_DB_DISABLED (1 << TIF_DB_DISABLED) +#define _TIF_FREEZE (1 << TIF_FREEZE) +#define _TIF_RESTORE_RSE (1 << TIF_RESTORE_RSE) + +/* "work to do on user-return" bits */ +#define TIF_ALLWORK_MASK (_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SYSCALL_AUDIT|\ + _TIF_NEED_RESCHED|_TIF_SYSCALL_TRACE) +/* like TIF_ALLWORK_BITS but sans TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT */ +#define TIF_WORK_MASK (TIF_ALLWORK_MASK&~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)) + +#define TS_POLLING 1 /* true if in idle loop and not sleeping */ +#define TS_RESTORE_SIGMASK 2 /* restore signal mask in do_signal() */ + +#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) + +#ifndef __ASSEMBLY__ +#define HAVE_SET_RESTORE_SIGMASK 1 +static inline void set_restore_sigmask(void) +{ + struct thread_info *ti = current_thread_info(); + ti->status |= TS_RESTORE_SIGMASK; + set_bit(TIF_SIGPENDING, &ti->flags); +} +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_IA64_THREAD_INFO_H */ diff --git a/arch/ia64/include/asm/timex.h b/arch/ia64/include/asm/timex.h new file mode 100644 index 000000000000..05a6baf8a472 --- /dev/null +++ b/arch/ia64/include/asm/timex.h @@ -0,0 +1,42 @@ +#ifndef _ASM_IA64_TIMEX_H +#define _ASM_IA64_TIMEX_H + +/* + * Copyright (C) 1998-2001, 2003 Hewlett-Packard Co + * David Mosberger-Tang + */ +/* + * 2001/01/18 davidm Removed CLOCK_TICK_RATE. It makes no sense on IA-64. + * Also removed cacheflush_time as it's entirely unused. + */ + +#include +#include + +typedef unsigned long cycles_t; + +extern void (*ia64_udelay)(unsigned long usecs); + +/* + * For performance reasons, we don't want to define CLOCK_TICK_TRATE as + * local_cpu_data->itc_rate. Fortunately, we don't have to, either: according to George + * Anzinger, 1/CLOCK_TICK_RATE is taken as the resolution of the timer clock. The time + * calculation assumes that you will use enough of these so that your tick size <= 1/HZ. + * If the calculation shows that your CLOCK_TICK_RATE can not supply exactly 1/HZ ticks, + * the actual value is calculated and used to update the wall clock each jiffie. Setting + * the CLOCK_TICK_RATE to x*HZ insures that the calculation will find no errors. Hence we + * pick a multiple of HZ which gives us a (totally virtual) CLOCK_TICK_RATE of about + * 100MHz. + */ +#define CLOCK_TICK_RATE (HZ * 100000UL) + +static inline cycles_t +get_cycles (void) +{ + cycles_t ret; + + ret = ia64_getreg(_IA64_REG_AR_ITC); + return ret; +} + +#endif /* _ASM_IA64_TIMEX_H */ diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h new file mode 100644 index 000000000000..20d8a39680c2 --- /dev/null +++ b/arch/ia64/include/asm/tlb.h @@ -0,0 +1,257 @@ +#ifndef _ASM_IA64_TLB_H +#define _ASM_IA64_TLB_H +/* + * Based on . + * + * Copyright (C) 2002-2003 Hewlett-Packard Co + * David Mosberger-Tang + */ +/* + * Removing a translation from a page table (including TLB-shootdown) is a four-step + * procedure: + * + * (1) Flush (virtual) caches --- ensures virtual memory is coherent with kernel memory + * (this is a no-op on ia64). + * (2) Clear the relevant portions of the page-table + * (3) Flush the TLBs --- ensures that stale content is gone from CPU TLBs + * (4) Release the pages that were freed up in step (2). + * + * Note that the ordering of these steps is crucial to avoid races on MP machines. + * + * The Linux kernel defines several platform-specific hooks for TLB-shootdown. When + * unmapping a portion of the virtual address space, these hooks are called according to + * the following template: + * + * tlb <- tlb_gather_mmu(mm, full_mm_flush); // start unmap for address space MM + * { + * for each vma that needs a shootdown do { + * tlb_start_vma(tlb, vma); + * for each page-table-entry PTE that needs to be removed do { + * tlb_remove_tlb_entry(tlb, pte, address); + * if (pte refers to a normal page) { + * tlb_remove_page(tlb, page); + * } + * } + * tlb_end_vma(tlb, vma); + * } + * } + * tlb_finish_mmu(tlb, start, end); // finish unmap for address space MM + */ +#include +#include +#include + +#include +#include +#include +#include + +#ifdef CONFIG_SMP +# define FREE_PTE_NR 2048 +# define tlb_fast_mode(tlb) ((tlb)->nr == ~0U) +#else +# define FREE_PTE_NR 0 +# define tlb_fast_mode(tlb) (1) +#endif + +struct mmu_gather { + struct mm_struct *mm; + unsigned int nr; /* == ~0U => fast mode */ + unsigned char fullmm; /* non-zero means full mm flush */ + unsigned char need_flush; /* really unmapped some PTEs? */ + unsigned long start_addr; + unsigned long end_addr; + struct page *pages[FREE_PTE_NR]; +}; + +struct ia64_tr_entry { + u64 ifa; + u64 itir; + u64 pte; + u64 rr; +}; /*Record for tr entry!*/ + +extern int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size); +extern void ia64_ptr_entry(u64 target_mask, int slot); + +extern struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX]; + +/* + region register macros +*/ +#define RR_TO_VE(val) (((val) >> 0) & 0x0000000000000001) +#define RR_VE(val) (((val) & 0x0000000000000001) << 0) +#define RR_VE_MASK 0x0000000000000001L +#define RR_VE_SHIFT 0 +#define RR_TO_PS(val) (((val) >> 2) & 0x000000000000003f) +#define RR_PS(val) (((val) & 0x000000000000003f) << 2) +#define RR_PS_MASK 0x00000000000000fcL +#define RR_PS_SHIFT 2 +#define RR_RID_MASK 0x00000000ffffff00L +#define RR_TO_RID(val) ((val >> 8) & 0xffffff) + +/* Users of the generic TLB shootdown code must declare this storage space. */ +DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); + +/* + * Flush the TLB for address range START to END and, if not in fast mode, release the + * freed pages that where gathered up to this point. + */ +static inline void +ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end) +{ + unsigned int nr; + + if (!tlb->need_flush) + return; + tlb->need_flush = 0; + + if (tlb->fullmm) { + /* + * Tearing down the entire address space. This happens both as a result + * of exit() and execve(). The latter case necessitates the call to + * flush_tlb_mm() here. + */ + flush_tlb_mm(tlb->mm); + } else if (unlikely (end - start >= 1024*1024*1024*1024UL + || REGION_NUMBER(start) != REGION_NUMBER(end - 1))) + { + /* + * If we flush more than a tera-byte or across regions, we're probably + * better off just flushing the entire TLB(s). This should be very rare + * and is not worth optimizing for. + */ + flush_tlb_all(); + } else { + /* + * XXX fix me: flush_tlb_range() should take an mm pointer instead of a + * vma pointer. + */ + struct vm_area_struct vma; + + vma.vm_mm = tlb->mm; + /* flush the address range from the tlb: */ + flush_tlb_range(&vma, start, end); + /* now flush the virt. page-table area mapping the address range: */ + flush_tlb_range(&vma, ia64_thash(start), ia64_thash(end)); + } + + /* lastly, release the freed pages */ + nr = tlb->nr; + if (!tlb_fast_mode(tlb)) { + unsigned long i; + tlb->nr = 0; + tlb->start_addr = ~0UL; + for (i = 0; i < nr; ++i) + free_page_and_swap_cache(tlb->pages[i]); + } +} + +/* + * Return a pointer to an initialized struct mmu_gather. + */ +static inline struct mmu_gather * +tlb_gather_mmu (struct mm_struct *mm, unsigned int full_mm_flush) +{ + struct mmu_gather *tlb = &get_cpu_var(mmu_gathers); + + tlb->mm = mm; + /* + * Use fast mode if only 1 CPU is online. + * + * It would be tempting to turn on fast-mode for full_mm_flush as well. But this + * doesn't work because of speculative accesses and software prefetching: the page + * table of "mm" may (and usually is) the currently active page table and even + * though the kernel won't do any user-space accesses during the TLB shoot down, a + * compiler might use speculation or lfetch.fault on what happens to be a valid + * user-space address. This in turn could trigger a TLB miss fault (or a VHPT + * walk) and re-insert a TLB entry we just removed. Slow mode avoids such + * problems. (We could make fast-mode work by switching the current task to a + * different "mm" during the shootdown.) --davidm 08/02/2002 + */ + tlb->nr = (num_online_cpus() == 1) ? ~0U : 0; + tlb->fullmm = full_mm_flush; + tlb->start_addr = ~0UL; + return tlb; +} + +/* + * Called at the end of the shootdown operation to free up any resources that were + * collected. + */ +static inline void +tlb_finish_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end) +{ + /* + * Note: tlb->nr may be 0 at this point, so we can't rely on tlb->start_addr and + * tlb->end_addr. + */ + ia64_tlb_flush_mmu(tlb, start, end); + + /* keep the page table cache within bounds */ + check_pgt_cache(); + + put_cpu_var(mmu_gathers); +} + +/* + * Logically, this routine frees PAGE. On MP machines, the actual freeing of the page + * must be delayed until after the TLB has been flushed (see comments at the beginning of + * this file). + */ +static inline void +tlb_remove_page (struct mmu_gather *tlb, struct page *page) +{ + tlb->need_flush = 1; + + if (tlb_fast_mode(tlb)) { + free_page_and_swap_cache(page); + return; + } + tlb->pages[tlb->nr++] = page; + if (tlb->nr >= FREE_PTE_NR) + ia64_tlb_flush_mmu(tlb, tlb->start_addr, tlb->end_addr); +} + +/* + * Remove TLB entry for PTE mapped at virtual address ADDRESS. This is called for any + * PTE, not just those pointing to (normal) physical memory. + */ +static inline void +__tlb_remove_tlb_entry (struct mmu_gather *tlb, pte_t *ptep, unsigned long address) +{ + if (tlb->start_addr == ~0UL) + tlb->start_addr = address; + tlb->end_addr = address + PAGE_SIZE; +} + +#define tlb_migrate_finish(mm) platform_tlb_migrate_finish(mm) + +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) + +#define tlb_remove_tlb_entry(tlb, ptep, addr) \ +do { \ + tlb->need_flush = 1; \ + __tlb_remove_tlb_entry(tlb, ptep, addr); \ +} while (0) + +#define pte_free_tlb(tlb, ptep) \ +do { \ + tlb->need_flush = 1; \ + __pte_free_tlb(tlb, ptep); \ +} while (0) + +#define pmd_free_tlb(tlb, ptep) \ +do { \ + tlb->need_flush = 1; \ + __pmd_free_tlb(tlb, ptep); \ +} while (0) + +#define pud_free_tlb(tlb, pudp) \ +do { \ + tlb->need_flush = 1; \ + __pud_free_tlb(tlb, pudp); \ +} while (0) + +#endif /* _ASM_IA64_TLB_H */ diff --git a/arch/ia64/include/asm/tlbflush.h b/arch/ia64/include/asm/tlbflush.h new file mode 100644 index 000000000000..3be25dfed164 --- /dev/null +++ b/arch/ia64/include/asm/tlbflush.h @@ -0,0 +1,102 @@ +#ifndef _ASM_IA64_TLBFLUSH_H +#define _ASM_IA64_TLBFLUSH_H + +/* + * Copyright (C) 2002 Hewlett-Packard Co + * David Mosberger-Tang + */ + + +#include + +#include +#include +#include + +/* + * Now for some TLB flushing routines. This is the kind of stuff that + * can be very expensive, so try to avoid them whenever possible. + */ +extern void setup_ptcg_sem(int max_purges, int from_palo); + +/* + * Flush everything (kernel mapping may also have changed due to + * vmalloc/vfree). + */ +extern void local_flush_tlb_all (void); + +#ifdef CONFIG_SMP + extern void smp_flush_tlb_all (void); + extern void smp_flush_tlb_mm (struct mm_struct *mm); + extern void smp_flush_tlb_cpumask (cpumask_t xcpumask); +# define flush_tlb_all() smp_flush_tlb_all() +#else +# define flush_tlb_all() local_flush_tlb_all() +# define smp_flush_tlb_cpumask(m) local_flush_tlb_all() +#endif + +static inline void +local_finish_flush_tlb_mm (struct mm_struct *mm) +{ + if (mm == current->active_mm) + activate_context(mm); +} + +/* + * Flush a specified user mapping. This is called, e.g., as a result of fork() and + * exit(). fork() ends up here because the copy-on-write mechanism needs to write-protect + * the PTEs of the parent task. + */ +static inline void +flush_tlb_mm (struct mm_struct *mm) +{ + if (!mm) + return; + + set_bit(mm->context, ia64_ctx.flushmap); + mm->context = 0; + + if (atomic_read(&mm->mm_users) == 0) + return; /* happens as a result of exit_mmap() */ + +#ifdef CONFIG_SMP + smp_flush_tlb_mm(mm); +#else + local_finish_flush_tlb_mm(mm); +#endif +} + +extern void flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long end); + +/* + * Page-granular tlb flush. + */ +static inline void +flush_tlb_page (struct vm_area_struct *vma, unsigned long addr) +{ +#ifdef CONFIG_SMP + flush_tlb_range(vma, (addr & PAGE_MASK), (addr & PAGE_MASK) + PAGE_SIZE); +#else + if (vma->vm_mm == current->active_mm) + ia64_ptcl(addr, (PAGE_SHIFT << 2)); + else + vma->vm_mm->context = 0; +#endif +} + +/* + * Flush the local TLB. Invoked from another cpu using an IPI. + */ +#ifdef CONFIG_SMP +void smp_local_flush_tlb(void); +#else +#define smp_local_flush_tlb() +#endif + +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ + flush_tlb_all(); /* XXX fix me */ +} + +#endif /* _ASM_IA64_TLBFLUSH_H */ diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h new file mode 100644 index 000000000000..35bcb641c9e5 --- /dev/null +++ b/arch/ia64/include/asm/topology.h @@ -0,0 +1,126 @@ +/* + * Copyright (C) 2002, Erich Focht, NEC + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef _ASM_IA64_TOPOLOGY_H +#define _ASM_IA64_TOPOLOGY_H + +#include +#include +#include + +#ifdef CONFIG_NUMA + +/* Nodes w/o CPUs are preferred for memory allocations, see build_zonelists */ +#define PENALTY_FOR_NODE_WITH_CPUS 255 + +/* + * Distance above which we begin to use zone reclaim + */ +#define RECLAIM_DISTANCE 15 + +/* + * Returns the number of the node containing CPU 'cpu' + */ +#define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu]) + +/* + * Returns a bitmask of CPUs on Node 'node'. + */ +#define node_to_cpumask(node) (node_to_cpu_mask[node]) + +/* + * Returns the number of the node containing Node 'nid'. + * Not implemented here. Multi-level hierarchies detected with + * the help of node_distance(). + */ +#define parent_node(nid) (nid) + +/* + * Returns the number of the first CPU on Node 'node'. + */ +#define node_to_first_cpu(node) (first_cpu(node_to_cpumask(node))) + +/* + * Determines the node for a given pci bus + */ +#define pcibus_to_node(bus) PCI_CONTROLLER(bus)->node + +void build_cpu_to_node_map(void); + +#define SD_CPU_INIT (struct sched_domain) { \ + .span = CPU_MASK_NONE, \ + .parent = NULL, \ + .child = NULL, \ + .groups = NULL, \ + .min_interval = 1, \ + .max_interval = 4, \ + .busy_factor = 64, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 2, \ + .busy_idx = 2, \ + .idle_idx = 1, \ + .newidle_idx = 2, \ + .wake_idx = 1, \ + .forkexec_idx = 1, \ + .flags = SD_LOAD_BALANCE \ + | SD_BALANCE_NEWIDLE \ + | SD_BALANCE_EXEC \ + | SD_WAKE_AFFINE, \ + .last_balance = jiffies, \ + .balance_interval = 1, \ + .nr_balance_failed = 0, \ +} + +/* sched_domains SD_NODE_INIT for IA64 NUMA machines */ +#define SD_NODE_INIT (struct sched_domain) { \ + .span = CPU_MASK_NONE, \ + .parent = NULL, \ + .child = NULL, \ + .groups = NULL, \ + .min_interval = 8, \ + .max_interval = 8*(min(num_online_cpus(), 32)), \ + .busy_factor = 64, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 2, \ + .busy_idx = 3, \ + .idle_idx = 2, \ + .newidle_idx = 2, \ + .wake_idx = 1, \ + .forkexec_idx = 1, \ + .flags = SD_LOAD_BALANCE \ + | SD_BALANCE_EXEC \ + | SD_BALANCE_FORK \ + | SD_SERIALIZE \ + | SD_WAKE_BALANCE, \ + .last_balance = jiffies, \ + .balance_interval = 64, \ + .nr_balance_failed = 0, \ +} + +#endif /* CONFIG_NUMA */ + +#ifdef CONFIG_SMP +#define topology_physical_package_id(cpu) (cpu_data(cpu)->socket_id) +#define topology_core_id(cpu) (cpu_data(cpu)->core_id) +#define topology_core_siblings(cpu) (cpu_core_map[cpu]) +#define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu)) +#define smt_capable() (smp_num_siblings > 1) +#endif + +extern void arch_fix_phys_package_id(int num, u32 slot); + +#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ + CPU_MASK_ALL : \ + node_to_cpumask(pcibus_to_node(bus)) \ + ) + +#include + +#endif /* _ASM_IA64_TOPOLOGY_H */ diff --git a/arch/ia64/include/asm/types.h b/arch/ia64/include/asm/types.h new file mode 100644 index 000000000000..e36b3716e718 --- /dev/null +++ b/arch/ia64/include/asm/types.h @@ -0,0 +1,46 @@ +#ifndef _ASM_IA64_TYPES_H +#define _ASM_IA64_TYPES_H + +/* + * This file is never included by application software unless explicitly requested (e.g., + * via linux/types.h) in which case the application is Linux specific so (user-) name + * space pollution is not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + * + * Based on . + * + * Modified 1998-2000, 2002 + * David Mosberger-Tang , Hewlett-Packard Co + */ + +#include + +#ifdef __ASSEMBLY__ +# define __IA64_UL(x) (x) +# define __IA64_UL_CONST(x) x + +# ifdef __KERNEL__ +# define BITS_PER_LONG 64 +# endif + +#else +# define __IA64_UL(x) ((unsigned long)(x)) +# define __IA64_UL_CONST(x) x##UL + +typedef unsigned int umode_t; + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +# ifdef __KERNEL__ + +#define BITS_PER_LONG 64 + +/* DMA addresses are 64-bits wide, in general. */ + +typedef u64 dma_addr_t; + +# endif /* __KERNEL__ */ +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_IA64_TYPES_H */ diff --git a/arch/ia64/include/asm/uaccess.h b/arch/ia64/include/asm/uaccess.h new file mode 100644 index 000000000000..449c8c0fa2bd --- /dev/null +++ b/arch/ia64/include/asm/uaccess.h @@ -0,0 +1,401 @@ +#ifndef _ASM_IA64_UACCESS_H +#define _ASM_IA64_UACCESS_H + +/* + * This file defines various macros to transfer memory areas across + * the user/kernel boundary. This needs to be done carefully because + * this code is executed in kernel mode and uses user-specified + * addresses. Thus, we need to be careful not to let the user to + * trick us into accessing kernel memory that would normally be + * inaccessible. This code is also fairly performance sensitive, + * so we want to spend as little time doing safety checks as + * possible. + * + * To make matters a bit more interesting, these macros sometimes also + * called from within the kernel itself, in which case the address + * validity check must be skipped. The get_fs() macro tells us what + * to do: if get_fs()==USER_DS, checking is performed, if + * get_fs()==KERNEL_DS, checking is bypassed. + * + * Note that even if the memory area specified by the user is in a + * valid address range, it is still possible that we'll get a page + * fault while accessing it. This is handled by filling out an + * exception handler fixup entry for each instruction that has the + * potential to fault. When such a fault occurs, the page fault + * handler checks to see whether the faulting instruction has a fixup + * associated and, if so, sets r8 to -EFAULT and clears r9 to 0 and + * then resumes execution at the continuation point. + * + * Based on . + * + * Copyright (C) 1998, 1999, 2001-2004 Hewlett-Packard Co + * David Mosberger-Tang + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +/* + * For historical reasons, the following macros are grossly misnamed: + */ +#define KERNEL_DS ((mm_segment_t) { ~0UL }) /* cf. access_ok() */ +#define USER_DS ((mm_segment_t) { TASK_SIZE-1 }) /* cf. access_ok() */ + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define get_ds() (KERNEL_DS) +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) + +#define segment_eq(a, b) ((a).seg == (b).seg) + +/* + * When accessing user memory, we need to make sure the entire area really is in + * user-level space. In order to do this efficiently, we make sure that the page at + * address TASK_SIZE is never valid. We also need to make sure that the address doesn't + * point inside the virtually mapped linear page table. + */ +#define __access_ok(addr, size, segment) \ +({ \ + __chk_user_ptr(addr); \ + (likely((unsigned long) (addr) <= (segment).seg) \ + && ((segment).seg == KERNEL_DS.seg \ + || likely(REGION_OFFSET((unsigned long) (addr)) < RGN_MAP_LIMIT))); \ +}) +#define access_ok(type, addr, size) __access_ok((addr), (size), get_fs()) + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + * + * Careful to not + * (a) re-use the arguments for side effects (sizeof/typeof is ok) + * (b) require any knowledge of processes at this stage + */ +#define put_user(x, ptr) __put_user_check((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)), get_fs()) +#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr)), get_fs()) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the programmer has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x, ptr) __put_user_nocheck((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr))) +#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) + +extern long __put_user_unaligned_unknown (void); + +#define __put_user_unaligned(x, ptr) \ +({ \ + long __ret; \ + switch (sizeof(*(ptr))) { \ + case 1: __ret = __put_user((x), (ptr)); break; \ + case 2: __ret = (__put_user((x), (u8 __user *)(ptr))) \ + | (__put_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break; \ + case 4: __ret = (__put_user((x), (u16 __user *)(ptr))) \ + | (__put_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break; \ + case 8: __ret = (__put_user((x), (u32 __user *)(ptr))) \ + | (__put_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break; \ + default: __ret = __put_user_unaligned_unknown(); \ + } \ + __ret; \ +}) + +extern long __get_user_unaligned_unknown (void); + +#define __get_user_unaligned(x, ptr) \ +({ \ + long __ret; \ + switch (sizeof(*(ptr))) { \ + case 1: __ret = __get_user((x), (ptr)); break; \ + case 2: __ret = (__get_user((x), (u8 __user *)(ptr))) \ + | (__get_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break; \ + case 4: __ret = (__get_user((x), (u16 __user *)(ptr))) \ + | (__get_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break; \ + case 8: __ret = (__get_user((x), (u32 __user *)(ptr))) \ + | (__get_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break; \ + default: __ret = __get_user_unaligned_unknown(); \ + } \ + __ret; \ +}) + +#ifdef ASM_SUPPORTED + struct __large_struct { unsigned long buf[100]; }; +# define __m(x) (*(struct __large_struct __user *)(x)) + +/* We need to declare the __ex_table section before we can use it in .xdata. */ +asm (".section \"__ex_table\", \"a\"\n\t.previous"); + +# define __get_user_size(val, addr, n, err) \ +do { \ + register long __gu_r8 asm ("r8") = 0; \ + register long __gu_r9 asm ("r9"); \ + asm ("\n[1:]\tld"#n" %0=%2%P2\t// %0 and %1 get overwritten by exception handler\n" \ + "\t.xdata4 \"__ex_table\", 1b-., 1f-.+4\n" \ + "[1:]" \ + : "=r"(__gu_r9), "=r"(__gu_r8) : "m"(__m(addr)), "1"(__gu_r8)); \ + (err) = __gu_r8; \ + (val) = __gu_r9; \ +} while (0) + +/* + * The "__put_user_size()" macro tells gcc it reads from memory instead of writing it. This + * is because they do not write to any memory gcc knows about, so there are no aliasing + * issues. + */ +# define __put_user_size(val, addr, n, err) \ +do { \ + register long __pu_r8 asm ("r8") = 0; \ + asm volatile ("\n[1:]\tst"#n" %1=%r2%P1\t// %0 gets overwritten by exception handler\n" \ + "\t.xdata4 \"__ex_table\", 1b-., 1f-.\n" \ + "[1:]" \ + : "=r"(__pu_r8) : "m"(__m(addr)), "rO"(val), "0"(__pu_r8)); \ + (err) = __pu_r8; \ +} while (0) + +#else /* !ASM_SUPPORTED */ +# define RELOC_TYPE 2 /* ip-rel */ +# define __get_user_size(val, addr, n, err) \ +do { \ + __ld_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE); \ + (err) = ia64_getreg(_IA64_REG_R8); \ + (val) = ia64_getreg(_IA64_REG_R9); \ +} while (0) +# define __put_user_size(val, addr, n, err) \ +do { \ + __st_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE, (unsigned long) (val)); \ + (err) = ia64_getreg(_IA64_REG_R8); \ +} while (0) +#endif /* !ASM_SUPPORTED */ + +extern void __get_user_unknown (void); + +/* + * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which + * could clobber r8 and r9 (among others). Thus, be careful not to evaluate it while + * using r8/r9. + */ +#define __do_get_user(check, x, ptr, size, segment) \ +({ \ + const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \ + __typeof__ (size) __gu_size = (size); \ + long __gu_err = -EFAULT; \ + unsigned long __gu_val = 0; \ + if (!check || __access_ok(__gu_ptr, size, segment)) \ + switch (__gu_size) { \ + case 1: __get_user_size(__gu_val, __gu_ptr, 1, __gu_err); break; \ + case 2: __get_user_size(__gu_val, __gu_ptr, 2, __gu_err); break; \ + case 4: __get_user_size(__gu_val, __gu_ptr, 4, __gu_err); break; \ + case 8: __get_user_size(__gu_val, __gu_ptr, 8, __gu_err); break; \ + default: __get_user_unknown(); break; \ + } \ + (x) = (__typeof__(*(__gu_ptr))) __gu_val; \ + __gu_err; \ +}) + +#define __get_user_nocheck(x, ptr, size) __do_get_user(0, x, ptr, size, KERNEL_DS) +#define __get_user_check(x, ptr, size, segment) __do_get_user(1, x, ptr, size, segment) + +extern void __put_user_unknown (void); + +/* + * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which + * could clobber r8 (among others). Thus, be careful not to evaluate them while using r8. + */ +#define __do_put_user(check, x, ptr, size, segment) \ +({ \ + __typeof__ (x) __pu_x = (x); \ + __typeof__ (*(ptr)) __user *__pu_ptr = (ptr); \ + __typeof__ (size) __pu_size = (size); \ + long __pu_err = -EFAULT; \ + \ + if (!check || __access_ok(__pu_ptr, __pu_size, segment)) \ + switch (__pu_size) { \ + case 1: __put_user_size(__pu_x, __pu_ptr, 1, __pu_err); break; \ + case 2: __put_user_size(__pu_x, __pu_ptr, 2, __pu_err); break; \ + case 4: __put_user_size(__pu_x, __pu_ptr, 4, __pu_err); break; \ + case 8: __put_user_size(__pu_x, __pu_ptr, 8, __pu_err); break; \ + default: __put_user_unknown(); break; \ + } \ + __pu_err; \ +}) + +#define __put_user_nocheck(x, ptr, size) __do_put_user(0, x, ptr, size, KERNEL_DS) +#define __put_user_check(x, ptr, size, segment) __do_put_user(1, x, ptr, size, segment) + +/* + * Complex access routines + */ +extern unsigned long __must_check __copy_user (void __user *to, const void __user *from, + unsigned long count); + +static inline unsigned long +__copy_to_user (void __user *to, const void *from, unsigned long count) +{ + return __copy_user(to, (__force void __user *) from, count); +} + +static inline unsigned long +__copy_from_user (void *to, const void __user *from, unsigned long count) +{ + return __copy_user((__force void __user *) to, from, count); +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user +#define copy_to_user(to, from, n) \ +({ \ + void __user *__cu_to = (to); \ + const void *__cu_from = (from); \ + long __cu_len = (n); \ + \ + if (__access_ok(__cu_to, __cu_len, get_fs())) \ + __cu_len = __copy_user(__cu_to, (__force void __user *) __cu_from, __cu_len); \ + __cu_len; \ +}) + +#define copy_from_user(to, from, n) \ +({ \ + void *__cu_to = (to); \ + const void __user *__cu_from = (from); \ + long __cu_len = (n); \ + \ + __chk_user_ptr(__cu_from); \ + if (__access_ok(__cu_from, __cu_len, get_fs())) \ + __cu_len = __copy_user((__force void __user *) __cu_to, __cu_from, __cu_len); \ + __cu_len; \ +}) + +#define __copy_in_user(to, from, size) __copy_user((to), (from), (size)) + +static inline unsigned long +copy_in_user (void __user *to, const void __user *from, unsigned long n) +{ + if (likely(access_ok(VERIFY_READ, from, n) && access_ok(VERIFY_WRITE, to, n))) + n = __copy_user(to, from, n); + return n; +} + +extern unsigned long __do_clear_user (void __user *, unsigned long); + +#define __clear_user(to, n) __do_clear_user(to, n) + +#define clear_user(to, n) \ +({ \ + unsigned long __cu_len = (n); \ + if (__access_ok(to, __cu_len, get_fs())) \ + __cu_len = __do_clear_user(to, __cu_len); \ + __cu_len; \ +}) + + +/* + * Returns: -EFAULT if exception before terminator, N if the entire buffer filled, else + * strlen. + */ +extern long __must_check __strncpy_from_user (char *to, const char __user *from, long to_len); + +#define strncpy_from_user(to, from, n) \ +({ \ + const char __user * __sfu_from = (from); \ + long __sfu_ret = -EFAULT; \ + if (__access_ok(__sfu_from, 0, get_fs())) \ + __sfu_ret = __strncpy_from_user((to), __sfu_from, (n)); \ + __sfu_ret; \ +}) + +/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ +extern unsigned long __strlen_user (const char __user *); + +#define strlen_user(str) \ +({ \ + const char __user *__su_str = (str); \ + unsigned long __su_ret = 0; \ + if (__access_ok(__su_str, 0, get_fs())) \ + __su_ret = __strlen_user(__su_str); \ + __su_ret; \ +}) + +/* + * Returns: 0 if exception before NUL or reaching the supplied limit + * (N), a value greater than N if the limit would be exceeded, else + * strlen. + */ +extern unsigned long __strnlen_user (const char __user *, long); + +#define strnlen_user(str, len) \ +({ \ + const char __user *__su_str = (str); \ + unsigned long __su_ret = 0; \ + if (__access_ok(__su_str, 0, get_fs())) \ + __su_ret = __strnlen_user(__su_str, len); \ + __su_ret; \ +}) + +/* Generic code can't deal with the location-relative format that we use for compactness. */ +#define ARCH_HAS_SORT_EXTABLE +#define ARCH_HAS_SEARCH_EXTABLE + +struct exception_table_entry { + int addr; /* location-relative address of insn this fixup is for */ + int cont; /* location-relative continuation addr.; if bit 2 is set, r9 is set to 0 */ +}; + +extern void ia64_handle_exception (struct pt_regs *regs, const struct exception_table_entry *e); +extern const struct exception_table_entry *search_exception_tables (unsigned long addr); + +static inline int +ia64_done_with_exception (struct pt_regs *regs) +{ + const struct exception_table_entry *e; + e = search_exception_tables(regs->cr_iip + ia64_psr(regs)->ri); + if (e) { + ia64_handle_exception(regs, e); + return 1; + } + return 0; +} + +#define ARCH_HAS_TRANSLATE_MEM_PTR 1 +static __inline__ char * +xlate_dev_mem_ptr (unsigned long p) +{ + struct page *page; + char * ptr; + + page = pfn_to_page(p >> PAGE_SHIFT); + if (PageUncached(page)) + ptr = (char *)p + __IA64_UNCACHED_OFFSET; + else + ptr = __va(p); + + return ptr; +} + +/* + * Convert a virtual cached kernel memory pointer to an uncached pointer + */ +static __inline__ char * +xlate_dev_kmem_ptr (char * p) +{ + struct page *page; + char * ptr; + + page = virt_to_page((unsigned long)p); + if (PageUncached(page)) + ptr = (char *)__pa(p) + __IA64_UNCACHED_OFFSET; + else + ptr = p; + + return ptr; +} + +#endif /* _ASM_IA64_UACCESS_H */ diff --git a/arch/ia64/include/asm/ucontext.h b/arch/ia64/include/asm/ucontext.h new file mode 100644 index 000000000000..bf573dc8ca6a --- /dev/null +++ b/arch/ia64/include/asm/ucontext.h @@ -0,0 +1,12 @@ +#ifndef _ASM_IA64_UCONTEXT_H +#define _ASM_IA64_UCONTEXT_H + +struct ucontext { + struct sigcontext uc_mcontext; +}; + +#define uc_link uc_mcontext.sc_gr[0] /* wrong type; nobody cares */ +#define uc_sigmask uc_mcontext.sc_sigmask +#define uc_stack uc_mcontext.sc_stack + +#endif /* _ASM_IA64_UCONTEXT_H */ diff --git a/arch/ia64/include/asm/unaligned.h b/arch/ia64/include/asm/unaligned.h new file mode 100644 index 000000000000..7bddc7f58584 --- /dev/null +++ b/arch/ia64/include/asm/unaligned.h @@ -0,0 +1,11 @@ +#ifndef _ASM_IA64_UNALIGNED_H +#define _ASM_IA64_UNALIGNED_H + +#include +#include +#include + +#define get_unaligned __get_unaligned_le +#define put_unaligned __put_unaligned_le + +#endif /* _ASM_IA64_UNALIGNED_H */ diff --git a/arch/ia64/include/asm/uncached.h b/arch/ia64/include/asm/uncached.h new file mode 100644 index 000000000000..13d7e65ca3cc --- /dev/null +++ b/arch/ia64/include/asm/uncached.h @@ -0,0 +1,12 @@ +/* + * Copyright (C) 2001-2008 Silicon Graphics, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * Prototypes for the uncached page allocator + */ + +extern unsigned long uncached_alloc_page(int starting_nid, int n_pages); +extern void uncached_free_page(unsigned long uc_addr, int n_pages); diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h new file mode 100644 index 000000000000..d535833aab5e --- /dev/null +++ b/arch/ia64/include/asm/unistd.h @@ -0,0 +1,384 @@ +#ifndef _ASM_IA64_UNISTD_H +#define _ASM_IA64_UNISTD_H + +/* + * IA-64 Linux syscall numbers and inline-functions. + * + * Copyright (C) 1998-2005 Hewlett-Packard Co + * David Mosberger-Tang + */ + +#include + +#define __BREAK_SYSCALL __IA64_BREAK_SYSCALL + +#define __NR_ni_syscall 1024 +#define __NR_exit 1025 +#define __NR_read 1026 +#define __NR_write 1027 +#define __NR_open 1028 +#define __NR_close 1029 +#define __NR_creat 1030 +#define __NR_link 1031 +#define __NR_unlink 1032 +#define __NR_execve 1033 +#define __NR_chdir 1034 +#define __NR_fchdir 1035 +#define __NR_utimes 1036 +#define __NR_mknod 1037 +#define __NR_chmod 1038 +#define __NR_chown 1039 +#define __NR_lseek 1040 +#define __NR_getpid 1041 +#define __NR_getppid 1042 +#define __NR_mount 1043 +#define __NR_umount 1044 +#define __NR_setuid 1045 +#define __NR_getuid 1046 +#define __NR_geteuid 1047 +#define __NR_ptrace 1048 +#define __NR_access 1049 +#define __NR_sync 1050 +#define __NR_fsync 1051 +#define __NR_fdatasync 1052 +#define __NR_kill 1053 +#define __NR_rename 1054 +#define __NR_mkdir 1055 +#define __NR_rmdir 1056 +#define __NR_dup 1057 +#define __NR_pipe 1058 +#define __NR_times 1059 +#define __NR_brk 1060 +#define __NR_setgid 1061 +#define __NR_getgid 1062 +#define __NR_getegid 1063 +#define __NR_acct 1064 +#define __NR_ioctl 1065 +#define __NR_fcntl 1066 +#define __NR_umask 1067 +#define __NR_chroot 1068 +#define __NR_ustat 1069 +#define __NR_dup2 1070 +#define __NR_setreuid 1071 +#define __NR_setregid 1072 +#define __NR_getresuid 1073 +#define __NR_setresuid 1074 +#define __NR_getresgid 1075 +#define __NR_setresgid 1076 +#define __NR_getgroups 1077 +#define __NR_setgroups 1078 +#define __NR_getpgid 1079 +#define __NR_setpgid 1080 +#define __NR_setsid 1081 +#define __NR_getsid 1082 +#define __NR_sethostname 1083 +#define __NR_setrlimit 1084 +#define __NR_getrlimit 1085 +#define __NR_getrusage 1086 +#define __NR_gettimeofday 1087 +#define __NR_settimeofday 1088 +#define __NR_select 1089 +#define __NR_poll 1090 +#define __NR_symlink 1091 +#define __NR_readlink 1092 +#define __NR_uselib 1093 +#define __NR_swapon 1094 +#define __NR_swapoff 1095 +#define __NR_reboot 1096 +#define __NR_truncate 1097 +#define __NR_ftruncate 1098 +#define __NR_fchmod 1099 +#define __NR_fchown 1100 +#define __NR_getpriority 1101 +#define __NR_setpriority 1102 +#define __NR_statfs 1103 +#define __NR_fstatfs 1104 +#define __NR_gettid 1105 +#define __NR_semget 1106 +#define __NR_semop 1107 +#define __NR_semctl 1108 +#define __NR_msgget 1109 +#define __NR_msgsnd 1110 +#define __NR_msgrcv 1111 +#define __NR_msgctl 1112 +#define __NR_shmget 1113 +#define __NR_shmat 1114 +#define __NR_shmdt 1115 +#define __NR_shmctl 1116 +/* also known as klogctl() in GNU libc: */ +#define __NR_syslog 1117 +#define __NR_setitimer 1118 +#define __NR_getitimer 1119 +/* 1120 was __NR_old_stat */ +/* 1121 was __NR_old_lstat */ +/* 1122 was __NR_old_fstat */ +#define __NR_vhangup 1123 +#define __NR_lchown 1124 +#define __NR_remap_file_pages 1125 +#define __NR_wait4 1126 +#define __NR_sysinfo 1127 +#define __NR_clone 1128 +#define __NR_setdomainname 1129 +#define __NR_uname 1130 +#define __NR_adjtimex 1131 +/* 1132 was __NR_create_module */ +#define __NR_init_module 1133 +#define __NR_delete_module 1134 +/* 1135 was __NR_get_kernel_syms */ +/* 1136 was __NR_query_module */ +#define __NR_quotactl 1137 +#define __NR_bdflush 1138 +#define __NR_sysfs 1139 +#define __NR_personality 1140 +#define __NR_afs_syscall 1141 +#define __NR_setfsuid 1142 +#define __NR_setfsgid 1143 +#define __NR_getdents 1144 +#define __NR_flock 1145 +#define __NR_readv 1146 +#define __NR_writev 1147 +#define __NR_pread64 1148 +#define __NR_pwrite64 1149 +#define __NR__sysctl 1150 +#define __NR_mmap 1151 +#define __NR_munmap 1152 +#define __NR_mlock 1153 +#define __NR_mlockall 1154 +#define __NR_mprotect 1155 +#define __NR_mremap 1156 +#define __NR_msync 1157 +#define __NR_munlock 1158 +#define __NR_munlockall 1159 +#define __NR_sched_getparam 1160 +#define __NR_sched_setparam 1161 +#define __NR_sched_getscheduler 1162 +#define __NR_sched_setscheduler 1163 +#define __NR_sched_yield 1164 +#define __NR_sched_get_priority_max 1165 +#define __NR_sched_get_priority_min 1166 +#define __NR_sched_rr_get_interval 1167 +#define __NR_nanosleep 1168 +#define __NR_nfsservctl 1169 +#define __NR_prctl 1170 +/* 1171 is reserved for backwards compatibility with old __NR_getpagesize */ +#define __NR_mmap2 1172 +#define __NR_pciconfig_read 1173 +#define __NR_pciconfig_write 1174 +#define __NR_perfmonctl 1175 +#define __NR_sigaltstack 1176 +#define __NR_rt_sigaction 1177 +#define __NR_rt_sigpending 1178 +#define __NR_rt_sigprocmask 1179 +#define __NR_rt_sigqueueinfo 1180 +#define __NR_rt_sigreturn 1181 +#define __NR_rt_sigsuspend 1182 +#define __NR_rt_sigtimedwait 1183 +#define __NR_getcwd 1184 +#define __NR_capget 1185 +#define __NR_capset 1186 +#define __NR_sendfile 1187 +#define __NR_getpmsg 1188 +#define __NR_putpmsg 1189 +#define __NR_socket 1190 +#define __NR_bind 1191 +#define __NR_connect 1192 +#define __NR_listen 1193 +#define __NR_accept 1194 +#define __NR_getsockname 1195 +#define __NR_getpeername 1196 +#define __NR_socketpair 1197 +#define __NR_send 1198 +#define __NR_sendto 1199 +#define __NR_recv 1200 +#define __NR_recvfrom 1201 +#define __NR_shutdown 1202 +#define __NR_setsockopt 1203 +#define __NR_getsockopt 1204 +#define __NR_sendmsg 1205 +#define __NR_recvmsg 1206 +#define __NR_pivot_root 1207 +#define __NR_mincore 1208 +#define __NR_madvise 1209 +#define __NR_stat 1210 +#define __NR_lstat 1211 +#define __NR_fstat 1212 +#define __NR_clone2 1213 +#define __NR_getdents64 1214 +#define __NR_getunwind 1215 +#define __NR_readahead 1216 +#define __NR_setxattr 1217 +#define __NR_lsetxattr 1218 +#define __NR_fsetxattr 1219 +#define __NR_getxattr 1220 +#define __NR_lgetxattr 1221 +#define __NR_fgetxattr 1222 +#define __NR_listxattr 1223 +#define __NR_llistxattr 1224 +#define __NR_flistxattr 1225 +#define __NR_removexattr 1226 +#define __NR_lremovexattr 1227 +#define __NR_fremovexattr 1228 +#define __NR_tkill 1229 +#define __NR_futex 1230 +#define __NR_sched_setaffinity 1231 +#define __NR_sched_getaffinity 1232 +#define __NR_set_tid_address 1233 +#define __NR_fadvise64 1234 +#define __NR_tgkill 1235 +#define __NR_exit_group 1236 +#define __NR_lookup_dcookie 1237 +#define __NR_io_setup 1238 +#define __NR_io_destroy 1239 +#define __NR_io_getevents 1240 +#define __NR_io_submit 1241 +#define __NR_io_cancel 1242 +#define __NR_epoll_create 1243 +#define __NR_epoll_ctl 1244 +#define __NR_epoll_wait 1245 +#define __NR_restart_syscall 1246 +#define __NR_semtimedop 1247 +#define __NR_timer_create 1248 +#define __NR_timer_settime 1249 +#define __NR_timer_gettime 1250 +#define __NR_timer_getoverrun 1251 +#define __NR_timer_delete 1252 +#define __NR_clock_settime 1253 +#define __NR_clock_gettime 1254 +#define __NR_clock_getres 1255 +#define __NR_clock_nanosleep 1256 +#define __NR_fstatfs64 1257 +#define __NR_statfs64 1258 +#define __NR_mbind 1259 +#define __NR_get_mempolicy 1260 +#define __NR_set_mempolicy 1261 +#define __NR_mq_open 1262 +#define __NR_mq_unlink 1263 +#define __NR_mq_timedsend 1264 +#define __NR_mq_timedreceive 1265 +#define __NR_mq_notify 1266 +#define __NR_mq_getsetattr 1267 +#define __NR_kexec_load 1268 +#define __NR_vserver 1269 +#define __NR_waitid 1270 +#define __NR_add_key 1271 +#define __NR_request_key 1272 +#define __NR_keyctl 1273 +#define __NR_ioprio_set 1274 +#define __NR_ioprio_get 1275 +#define __NR_move_pages 1276 +#define __NR_inotify_init 1277 +#define __NR_inotify_add_watch 1278 +#define __NR_inotify_rm_watch 1279 +#define __NR_migrate_pages 1280 +#define __NR_openat 1281 +#define __NR_mkdirat 1282 +#define __NR_mknodat 1283 +#define __NR_fchownat 1284 +#define __NR_futimesat 1285 +#define __NR_newfstatat 1286 +#define __NR_unlinkat 1287 +#define __NR_renameat 1288 +#define __NR_linkat 1289 +#define __NR_symlinkat 1290 +#define __NR_readlinkat 1291 +#define __NR_fchmodat 1292 +#define __NR_faccessat 1293 +#define __NR_pselect6 1294 +#define __NR_ppoll 1295 +#define __NR_unshare 1296 +#define __NR_splice 1297 +#define __NR_set_robust_list 1298 +#define __NR_get_robust_list 1299 +#define __NR_sync_file_range 1300 +#define __NR_tee 1301 +#define __NR_vmsplice 1302 +#define __NR_fallocate 1303 +#define __NR_getcpu 1304 +#define __NR_epoll_pwait 1305 +#define __NR_utimensat 1306 +#define __NR_signalfd 1307 +#define __NR_timerfd 1308 +#define __NR_eventfd 1309 +#define __NR_timerfd_create 1310 +#define __NR_timerfd_settime 1311 +#define __NR_timerfd_gettime 1312 +#define __NR_signalfd4 1313 +#define __NR_eventfd2 1314 +#define __NR_epoll_create1 1315 +#define __NR_dup3 1316 +#define __NR_pipe2 1317 +#define __NR_inotify_init1 1318 + +#ifdef __KERNEL__ + + +#define NR_syscalls 295 /* length of syscall table */ + +/* + * The following defines stop scripts/checksyscalls.sh from complaining about + * unimplemented system calls. Glibc provides for each of these by using + * more modern equivalent system calls. + */ +#define __IGNORE_fork /* clone() */ +#define __IGNORE_time /* gettimeofday() */ +#define __IGNORE_alarm /* setitimer(ITIMER_REAL, ... */ +#define __IGNORE_pause /* rt_sigprocmask(), rt_sigsuspend() */ +#define __IGNORE_utime /* utimes() */ +#define __IGNORE_getpgrp /* getpgid() */ +#define __IGNORE_vfork /* clone() */ + +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND + +#ifdef CONFIG_IA32_SUPPORT +# define __ARCH_WANT_SYS_FADVISE64 +# define __ARCH_WANT_SYS_GETPGRP +# define __ARCH_WANT_SYS_LLSEEK +# define __ARCH_WANT_SYS_NICE +# define __ARCH_WANT_SYS_OLD_GETRLIMIT +# define __ARCH_WANT_SYS_OLDUMOUNT +# define __ARCH_WANT_SYS_SIGPENDING +# define __ARCH_WANT_SYS_SIGPROCMASK +# define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND +# define __ARCH_WANT_COMPAT_SYS_TIME +#endif + +#if !defined(__ASSEMBLY__) && !defined(ASSEMBLER) + +#include +#include +#include + +extern long __ia64_syscall (long a0, long a1, long a2, long a3, long a4, long nr); + +asmlinkage unsigned long sys_mmap( + unsigned long addr, unsigned long len, + int prot, int flags, + int fd, long off); +asmlinkage unsigned long sys_mmap2( + unsigned long addr, unsigned long len, + int prot, int flags, + int fd, long pgoff); +struct pt_regs; +struct sigaction; +long sys_execve(char __user *filename, char __user * __user *argv, + char __user * __user *envp, struct pt_regs *regs); +asmlinkage long sys_pipe(void); +asmlinkage long sys_rt_sigaction(int sig, + const struct sigaction __user *act, + struct sigaction __user *oact, + size_t sigsetsize); + +/* + * "Conditional" syscalls + * + * Note, this macro can only be used in the file which defines sys_ni_syscall, i.e., in + * kernel/sys_ni.c. This version causes warnings because the declaration isn't a + * proper prototype, but we can't use __typeof__ either, because not all cond_syscall() + * declarations have prototypes at the moment. + */ +#define cond_syscall(x) asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall"))) + +#endif /* !__ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_IA64_UNISTD_H */ diff --git a/arch/ia64/include/asm/unwind.h b/arch/ia64/include/asm/unwind.h new file mode 100644 index 000000000000..1af3875f1a57 --- /dev/null +++ b/arch/ia64/include/asm/unwind.h @@ -0,0 +1,233 @@ +#ifndef _ASM_IA64_UNWIND_H +#define _ASM_IA64_UNWIND_H + +/* + * Copyright (C) 1999-2000, 2003 Hewlett-Packard Co + * David Mosberger-Tang + * + * A simple API for unwinding kernel stacks. This is used for + * debugging and error reporting purposes. The kernel doesn't need + * full-blown stack unwinding with all the bells and whitles, so there + * is not much point in implementing the full IA-64 unwind API (though + * it would of course be possible to implement the kernel API on top + * of it). + */ + +struct task_struct; /* forward declaration */ +struct switch_stack; /* forward declaration */ + +enum unw_application_register { + UNW_AR_BSP, + UNW_AR_BSPSTORE, + UNW_AR_PFS, + UNW_AR_RNAT, + UNW_AR_UNAT, + UNW_AR_LC, + UNW_AR_EC, + UNW_AR_FPSR, + UNW_AR_RSC, + UNW_AR_CCV, + UNW_AR_CSD, + UNW_AR_SSD +}; + +/* + * The following declarations are private to the unwind + * implementation: + */ + +struct unw_stack { + unsigned long limit; + unsigned long top; +}; + +#define UNW_FLAG_INTERRUPT_FRAME (1UL << 0) + +/* + * No user of this module should every access this structure directly + * as it is subject to change. It is declared here solely so we can + * use automatic variables. + */ +struct unw_frame_info { + struct unw_stack regstk; + struct unw_stack memstk; + unsigned int flags; + short hint; + short prev_script; + + /* current frame info: */ + unsigned long bsp; /* backing store pointer value */ + unsigned long sp; /* stack pointer value */ + unsigned long psp; /* previous sp value */ + unsigned long ip; /* instruction pointer value */ + unsigned long pr; /* current predicate values */ + unsigned long *cfm_loc; /* cfm save location (or NULL) */ + unsigned long pt; /* struct pt_regs location */ + + struct task_struct *task; + struct switch_stack *sw; + + /* preserved state: */ + unsigned long *bsp_loc; /* previous bsp save location */ + unsigned long *bspstore_loc; + unsigned long *pfs_loc; + unsigned long *rnat_loc; + unsigned long *rp_loc; + unsigned long *pri_unat_loc; + unsigned long *unat_loc; + unsigned long *pr_loc; + unsigned long *lc_loc; + unsigned long *fpsr_loc; + struct unw_ireg { + unsigned long *loc; + struct unw_ireg_nat { + unsigned long type : 3; /* enum unw_nat_type */ + signed long off : 61; /* NaT word is at loc+nat.off */ + } nat; + } r4, r5, r6, r7; + unsigned long *b1_loc, *b2_loc, *b3_loc, *b4_loc, *b5_loc; + struct ia64_fpreg *f2_loc, *f3_loc, *f4_loc, *f5_loc, *fr_loc[16]; +}; + +/* + * The official API follows below: + */ + +struct unw_table_entry { + u64 start_offset; + u64 end_offset; + u64 info_offset; +}; + +/* + * Initialize unwind support. + */ +extern void unw_init (void); + +extern void *unw_add_unwind_table (const char *name, unsigned long segment_base, unsigned long gp, + const void *table_start, const void *table_end); + +extern void unw_remove_unwind_table (void *handle); + +/* + * Prepare to unwind blocked task t. + */ +extern void unw_init_from_blocked_task (struct unw_frame_info *info, struct task_struct *t); + +extern void unw_init_frame_info (struct unw_frame_info *info, struct task_struct *t, + struct switch_stack *sw); + +/* + * Prepare to unwind the currently running thread. + */ +extern void unw_init_running (void (*callback)(struct unw_frame_info *info, void *arg), void *arg); + +/* + * Unwind to previous to frame. Returns 0 if successful, negative + * number in case of an error. + */ +extern int unw_unwind (struct unw_frame_info *info); + +/* + * Unwind until the return pointer is in user-land (or until an error + * occurs). Returns 0 if successful, negative number in case of + * error. + */ +extern int unw_unwind_to_user (struct unw_frame_info *info); + +#define unw_is_intr_frame(info) (((info)->flags & UNW_FLAG_INTERRUPT_FRAME) != 0) + +static inline int +unw_get_ip (struct unw_frame_info *info, unsigned long *valp) +{ + *valp = (info)->ip; + return 0; +} + +static inline int +unw_get_sp (struct unw_frame_info *info, unsigned long *valp) +{ + *valp = (info)->sp; + return 0; +} + +static inline int +unw_get_psp (struct unw_frame_info *info, unsigned long *valp) +{ + *valp = (info)->psp; + return 0; +} + +static inline int +unw_get_bsp (struct unw_frame_info *info, unsigned long *valp) +{ + *valp = (info)->bsp; + return 0; +} + +static inline int +unw_get_cfm (struct unw_frame_info *info, unsigned long *valp) +{ + *valp = *(info)->cfm_loc; + return 0; +} + +static inline int +unw_set_cfm (struct unw_frame_info *info, unsigned long val) +{ + *(info)->cfm_loc = val; + return 0; +} + +static inline int +unw_get_rp (struct unw_frame_info *info, unsigned long *val) +{ + if (!info->rp_loc) + return -1; + *val = *info->rp_loc; + return 0; +} + +extern int unw_access_gr (struct unw_frame_info *, int, unsigned long *, char *, int); +extern int unw_access_br (struct unw_frame_info *, int, unsigned long *, int); +extern int unw_access_fr (struct unw_frame_info *, int, struct ia64_fpreg *, int); +extern int unw_access_ar (struct unw_frame_info *, int, unsigned long *, int); +extern int unw_access_pr (struct unw_frame_info *, unsigned long *, int); + +static inline int +unw_set_gr (struct unw_frame_info *i, int n, unsigned long v, char nat) +{ + return unw_access_gr(i, n, &v, &nat, 1); +} + +static inline int +unw_set_br (struct unw_frame_info *i, int n, unsigned long v) +{ + return unw_access_br(i, n, &v, 1); +} + +static inline int +unw_set_fr (struct unw_frame_info *i, int n, struct ia64_fpreg v) +{ + return unw_access_fr(i, n, &v, 1); +} + +static inline int +unw_set_ar (struct unw_frame_info *i, int n, unsigned long v) +{ + return unw_access_ar(i, n, &v, 1); +} + +static inline int +unw_set_pr (struct unw_frame_info *i, unsigned long v) +{ + return unw_access_pr(i, &v, 1); +} + +#define unw_get_gr(i,n,v,nat) unw_access_gr(i,n,v,nat,0) +#define unw_get_br(i,n,v) unw_access_br(i,n,v,0) +#define unw_get_fr(i,n,v) unw_access_fr(i,n,v,0) +#define unw_get_ar(i,n,v) unw_access_ar(i,n,v,0) +#define unw_get_pr(i,v) unw_access_pr(i,v,0) + +#endif /* _ASM_UNWIND_H */ diff --git a/arch/ia64/include/asm/user.h b/arch/ia64/include/asm/user.h new file mode 100644 index 000000000000..8b9821110348 --- /dev/null +++ b/arch/ia64/include/asm/user.h @@ -0,0 +1,58 @@ +#ifndef _ASM_IA64_USER_H +#define _ASM_IA64_USER_H + +/* + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd). The file contents are as + * follows: + * + * upage: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page long. + * data: The data segment follows next. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * stack: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these in order to be able + * to write an integer number of pages. + * + * Modified 1998, 1999, 2001 + * David Mosberger-Tang , Hewlett-Packard Co + */ + +#include +#include + +#include + +#define EF_SIZE 3072 /* XXX fix me */ + +struct user { + unsigned long regs[EF_SIZE/8+32]; /* integer and fp regs */ + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + unsigned long u_ar0; /* help gdb find registers */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* _ASM_IA64_USER_H */ diff --git a/arch/ia64/include/asm/ustack.h b/arch/ia64/include/asm/ustack.h new file mode 100644 index 000000000000..504167c35b8b --- /dev/null +++ b/arch/ia64/include/asm/ustack.h @@ -0,0 +1,20 @@ +#ifndef _ASM_IA64_USTACK_H +#define _ASM_IA64_USTACK_H + +/* + * Constants for the user stack size + */ + +#ifdef __KERNEL__ +#include + +/* The absolute hard limit for stack size is 1/2 of the mappable space in the region */ +#define MAX_USER_STACK_SIZE (RGN_MAP_LIMIT/2) +#define STACK_TOP (0x6000000000000000UL + RGN_MAP_LIMIT) +#define STACK_TOP_MAX STACK_TOP +#endif + +/* Make a default stack size of 2GiB */ +#define DEFAULT_USER_STACK_SIZE (1UL << 31) + +#endif /* _ASM_IA64_USTACK_H */ diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h new file mode 100644 index 000000000000..f607018af4a1 --- /dev/null +++ b/arch/ia64/include/asm/uv/uv_hub.h @@ -0,0 +1,309 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * SGI UV architectural definitions + * + * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef __ASM_IA64_UV_HUB_H__ +#define __ASM_IA64_UV_HUB_H__ + +#include +#include +#include +#include + + +/* + * Addressing Terminology + * + * M - The low M bits of a physical address represent the offset + * into the blade local memory. RAM memory on a blade is physically + * contiguous (although various IO spaces may punch holes in + * it).. + * + * N - Number of bits in the node portion of a socket physical + * address. + * + * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of + * routers always have low bit of 1, C/MBricks have low bit + * equal to 0. Most addressing macros that target UV hub chips + * right shift the NASID by 1 to exclude the always-zero bit. + * NASIDs contain up to 15 bits. + * + * GNODE - NASID right shifted by 1 bit. Most mmrs contain gnodes instead + * of nasids. + * + * PNODE - the low N bits of the GNODE. The PNODE is the most useful variant + * of the nasid for socket usage. + * + * + * NumaLink Global Physical Address Format: + * +--------------------------------+---------------------+ + * |00..000| GNODE | NodeOffset | + * +--------------------------------+---------------------+ + * |<-------53 - M bits --->|<--------M bits -----> + * + * M - number of node offset bits (35 .. 40) + * + * + * Memory/UV-HUB Processor Socket Address Format: + * +----------------+---------------+---------------------+ + * |00..000000000000| PNODE | NodeOffset | + * +----------------+---------------+---------------------+ + * <--- N bits --->|<--------M bits -----> + * + * M - number of node offset bits (35 .. 40) + * N - number of PNODE bits (0 .. 10) + * + * Note: M + N cannot currently exceed 44 (x86_64) or 46 (IA64). + * The actual values are configuration dependent and are set at + * boot time. M & N values are set by the hardware/BIOS at boot. + */ + + +/* + * Maximum number of bricks in all partitions and in all coherency domains. + * This is the total number of bricks accessible in the numalink fabric. It + * includes all C & M bricks. Routers are NOT included. + * + * This value is also the value of the maximum number of non-router NASIDs + * in the numalink fabric. + * + * NOTE: a brick may contain 1 or 2 OS nodes. Don't get these confused. + */ +#define UV_MAX_NUMALINK_BLADES 16384 + +/* + * Maximum number of C/Mbricks within a software SSI (hardware may support + * more). + */ +#define UV_MAX_SSI_BLADES 1 + +/* + * The largest possible NASID of a C or M brick (+ 2) + */ +#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_NODES * 2) + +/* + * The following defines attributes of the HUB chip. These attributes are + * frequently referenced and are kept in the per-cpu data areas of each cpu. + * They are kept together in a struct to minimize cache misses. + */ +struct uv_hub_info_s { + unsigned long global_mmr_base; + unsigned long gpa_mask; + unsigned long gnode_upper; + unsigned long lowmem_remap_top; + unsigned long lowmem_remap_base; + unsigned short pnode; + unsigned short pnode_mask; + unsigned short coherency_domain_number; + unsigned short numa_blade_id; + unsigned char blade_processor_id; + unsigned char m_val; + unsigned char n_val; +}; +DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); +#define uv_hub_info (&__get_cpu_var(__uv_hub_info)) +#define uv_cpu_hub_info(cpu) (&per_cpu(__uv_hub_info, cpu)) + +/* + * Local & Global MMR space macros. + * Note: macros are intended to be used ONLY by inline functions + * in this file - not by other kernel code. + * n - NASID (full 15-bit global nasid) + * g - GNODE (full 15-bit global nasid, right shifted 1) + * p - PNODE (local part of nsids, right shifted 1) + */ +#define UV_NASID_TO_PNODE(n) (((n) >> 1) & uv_hub_info->pnode_mask) +#define UV_PNODE_TO_NASID(p) (((p) << 1) | uv_hub_info->gnode_upper) + +#define UV_LOCAL_MMR_BASE 0xf4000000UL +#define UV_GLOBAL_MMR32_BASE 0xf8000000UL +#define UV_GLOBAL_MMR64_BASE (uv_hub_info->global_mmr_base) + +#define UV_GLOBAL_MMR32_PNODE_SHIFT 15 +#define UV_GLOBAL_MMR64_PNODE_SHIFT 26 + +#define UV_GLOBAL_MMR32_PNODE_BITS(p) ((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT)) + +#define UV_GLOBAL_MMR64_PNODE_BITS(p) \ + ((unsigned long)(p) << UV_GLOBAL_MMR64_PNODE_SHIFT) + +/* + * Macros for converting between kernel virtual addresses, socket local physical + * addresses, and UV global physical addresses. + * Note: use the standard __pa() & __va() macros for converting + * between socket virtual and socket physical addresses. + */ + +/* socket phys RAM --> UV global physical address */ +static inline unsigned long uv_soc_phys_ram_to_gpa(unsigned long paddr) +{ + if (paddr < uv_hub_info->lowmem_remap_top) + paddr += uv_hub_info->lowmem_remap_base; + return paddr | uv_hub_info->gnode_upper; +} + + +/* socket virtual --> UV global physical address */ +static inline unsigned long uv_gpa(void *v) +{ + return __pa(v) | uv_hub_info->gnode_upper; +} + +/* socket virtual --> UV global physical address */ +static inline void *uv_vgpa(void *v) +{ + return (void *)uv_gpa(v); +} + +/* UV global physical address --> socket virtual */ +static inline void *uv_va(unsigned long gpa) +{ + return __va(gpa & uv_hub_info->gpa_mask); +} + +/* pnode, offset --> socket virtual */ +static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset) +{ + return __va(((unsigned long)pnode << uv_hub_info->m_val) | offset); +} + + +/* + * Access global MMRs using the low memory MMR32 space. This region supports + * faster MMR access but not all MMRs are accessible in this space. + */ +static inline unsigned long *uv_global_mmr32_address(int pnode, + unsigned long offset) +{ + return __va(UV_GLOBAL_MMR32_BASE | + UV_GLOBAL_MMR32_PNODE_BITS(pnode) | offset); +} + +static inline void uv_write_global_mmr32(int pnode, unsigned long offset, + unsigned long val) +{ + *uv_global_mmr32_address(pnode, offset) = val; +} + +static inline unsigned long uv_read_global_mmr32(int pnode, + unsigned long offset) +{ + return *uv_global_mmr32_address(pnode, offset); +} + +/* + * Access Global MMR space using the MMR space located at the top of physical + * memory. + */ +static inline unsigned long *uv_global_mmr64_address(int pnode, + unsigned long offset) +{ + return __va(UV_GLOBAL_MMR64_BASE | + UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset); +} + +static inline void uv_write_global_mmr64(int pnode, unsigned long offset, + unsigned long val) +{ + *uv_global_mmr64_address(pnode, offset) = val; +} + +static inline unsigned long uv_read_global_mmr64(int pnode, + unsigned long offset) +{ + return *uv_global_mmr64_address(pnode, offset); +} + +/* + * Access hub local MMRs. Faster than using global space but only local MMRs + * are accessible. + */ +static inline unsigned long *uv_local_mmr_address(unsigned long offset) +{ + return __va(UV_LOCAL_MMR_BASE | offset); +} + +static inline unsigned long uv_read_local_mmr(unsigned long offset) +{ + return *uv_local_mmr_address(offset); +} + +static inline void uv_write_local_mmr(unsigned long offset, unsigned long val) +{ + *uv_local_mmr_address(offset) = val; +} + +/* + * Structures and definitions for converting between cpu, node, pnode, and blade + * numbers. + */ + +/* Blade-local cpu number of current cpu. Numbered 0 .. <# cpus on the blade> */ +static inline int uv_blade_processor_id(void) +{ + return smp_processor_id(); +} + +/* Blade number of current cpu. Numnbered 0 .. <#blades -1> */ +static inline int uv_numa_blade_id(void) +{ + return 0; +} + +/* Convert a cpu number to the the UV blade number */ +static inline int uv_cpu_to_blade_id(int cpu) +{ + return 0; +} + +/* Convert linux node number to the UV blade number */ +static inline int uv_node_to_blade_id(int nid) +{ + return 0; +} + +/* Convert a blade id to the PNODE of the blade */ +static inline int uv_blade_to_pnode(int bid) +{ + return 0; +} + +/* Determine the number of possible cpus on a blade */ +static inline int uv_blade_nr_possible_cpus(int bid) +{ + return num_possible_cpus(); +} + +/* Determine the number of online cpus on a blade */ +static inline int uv_blade_nr_online_cpus(int bid) +{ + return num_online_cpus(); +} + +/* Convert a cpu id to the PNODE of the blade containing the cpu */ +static inline int uv_cpu_to_pnode(int cpu) +{ + return 0; +} + +/* Convert a linux node number to the PNODE of the blade */ +static inline int uv_node_to_pnode(int nid) +{ + return 0; +} + +/* Maximum possible number of blades */ +static inline int uv_num_possible_blades(void) +{ + return 1; +} + +#endif /* __ASM_IA64_UV_HUB__ */ + diff --git a/arch/ia64/include/asm/uv/uv_mmrs.h b/arch/ia64/include/asm/uv/uv_mmrs.h new file mode 100644 index 000000000000..c149ef085437 --- /dev/null +++ b/arch/ia64/include/asm/uv/uv_mmrs.h @@ -0,0 +1,673 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * SGI UV MMR definitions + * + * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef __ASM_IA64_UV_MMRS__ +#define __ASM_IA64_UV_MMRS__ + +#define UV_MMR_ENABLE (1UL << 63) + +/* ========================================================================= */ +/* UVH_BAU_DATA_CONFIG */ +/* ========================================================================= */ +#define UVH_BAU_DATA_CONFIG 0x61680UL +#define UVH_BAU_DATA_CONFIG_32 0x0438 + +#define UVH_BAU_DATA_CONFIG_VECTOR_SHFT 0 +#define UVH_BAU_DATA_CONFIG_VECTOR_MASK 0x00000000000000ffUL +#define UVH_BAU_DATA_CONFIG_DM_SHFT 8 +#define UVH_BAU_DATA_CONFIG_DM_MASK 0x0000000000000700UL +#define UVH_BAU_DATA_CONFIG_DESTMODE_SHFT 11 +#define UVH_BAU_DATA_CONFIG_DESTMODE_MASK 0x0000000000000800UL +#define UVH_BAU_DATA_CONFIG_STATUS_SHFT 12 +#define UVH_BAU_DATA_CONFIG_STATUS_MASK 0x0000000000001000UL +#define UVH_BAU_DATA_CONFIG_P_SHFT 13 +#define UVH_BAU_DATA_CONFIG_P_MASK 0x0000000000002000UL +#define UVH_BAU_DATA_CONFIG_T_SHFT 15 +#define UVH_BAU_DATA_CONFIG_T_MASK 0x0000000000008000UL +#define UVH_BAU_DATA_CONFIG_M_SHFT 16 +#define UVH_BAU_DATA_CONFIG_M_MASK 0x0000000000010000UL +#define UVH_BAU_DATA_CONFIG_APIC_ID_SHFT 32 +#define UVH_BAU_DATA_CONFIG_APIC_ID_MASK 0xffffffff00000000UL + +union uvh_bau_data_config_u { + unsigned long v; + struct uvh_bau_data_config_s { + unsigned long vector_ : 8; /* RW */ + unsigned long dm : 3; /* RW */ + unsigned long destmode : 1; /* RW */ + unsigned long status : 1; /* RO */ + unsigned long p : 1; /* RO */ + unsigned long rsvd_14 : 1; /* */ + unsigned long t : 1; /* RO */ + unsigned long m : 1; /* RW */ + unsigned long rsvd_17_31: 15; /* */ + unsigned long apic_id : 32; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_EVENT_OCCURRED0 */ +/* ========================================================================= */ +#define UVH_EVENT_OCCURRED0 0x70000UL +#define UVH_EVENT_OCCURRED0_32 0x005e8 + +#define UVH_EVENT_OCCURRED0_LB_HCERR_SHFT 0 +#define UVH_EVENT_OCCURRED0_LB_HCERR_MASK 0x0000000000000001UL +#define UVH_EVENT_OCCURRED0_GR0_HCERR_SHFT 1 +#define UVH_EVENT_OCCURRED0_GR0_HCERR_MASK 0x0000000000000002UL +#define UVH_EVENT_OCCURRED0_GR1_HCERR_SHFT 2 +#define UVH_EVENT_OCCURRED0_GR1_HCERR_MASK 0x0000000000000004UL +#define UVH_EVENT_OCCURRED0_LH_HCERR_SHFT 3 +#define UVH_EVENT_OCCURRED0_LH_HCERR_MASK 0x0000000000000008UL +#define UVH_EVENT_OCCURRED0_RH_HCERR_SHFT 4 +#define UVH_EVENT_OCCURRED0_RH_HCERR_MASK 0x0000000000000010UL +#define UVH_EVENT_OCCURRED0_XN_HCERR_SHFT 5 +#define UVH_EVENT_OCCURRED0_XN_HCERR_MASK 0x0000000000000020UL +#define UVH_EVENT_OCCURRED0_SI_HCERR_SHFT 6 +#define UVH_EVENT_OCCURRED0_SI_HCERR_MASK 0x0000000000000040UL +#define UVH_EVENT_OCCURRED0_LB_AOERR0_SHFT 7 +#define UVH_EVENT_OCCURRED0_LB_AOERR0_MASK 0x0000000000000080UL +#define UVH_EVENT_OCCURRED0_GR0_AOERR0_SHFT 8 +#define UVH_EVENT_OCCURRED0_GR0_AOERR0_MASK 0x0000000000000100UL +#define UVH_EVENT_OCCURRED0_GR1_AOERR0_SHFT 9 +#define UVH_EVENT_OCCURRED0_GR1_AOERR0_MASK 0x0000000000000200UL +#define UVH_EVENT_OCCURRED0_LH_AOERR0_SHFT 10 +#define UVH_EVENT_OCCURRED0_LH_AOERR0_MASK 0x0000000000000400UL +#define UVH_EVENT_OCCURRED0_RH_AOERR0_SHFT 11 +#define UVH_EVENT_OCCURRED0_RH_AOERR0_MASK 0x0000000000000800UL +#define UVH_EVENT_OCCURRED0_XN_AOERR0_SHFT 12 +#define UVH_EVENT_OCCURRED0_XN_AOERR0_MASK 0x0000000000001000UL +#define UVH_EVENT_OCCURRED0_SI_AOERR0_SHFT 13 +#define UVH_EVENT_OCCURRED0_SI_AOERR0_MASK 0x0000000000002000UL +#define UVH_EVENT_OCCURRED0_LB_AOERR1_SHFT 14 +#define UVH_EVENT_OCCURRED0_LB_AOERR1_MASK 0x0000000000004000UL +#define UVH_EVENT_OCCURRED0_GR0_AOERR1_SHFT 15 +#define UVH_EVENT_OCCURRED0_GR0_AOERR1_MASK 0x0000000000008000UL +#define UVH_EVENT_OCCURRED0_GR1_AOERR1_SHFT 16 +#define UVH_EVENT_OCCURRED0_GR1_AOERR1_MASK 0x0000000000010000UL +#define UVH_EVENT_OCCURRED0_LH_AOERR1_SHFT 17 +#define UVH_EVENT_OCCURRED0_LH_AOERR1_MASK 0x0000000000020000UL +#define UVH_EVENT_OCCURRED0_RH_AOERR1_SHFT 18 +#define UVH_EVENT_OCCURRED0_RH_AOERR1_MASK 0x0000000000040000UL +#define UVH_EVENT_OCCURRED0_XN_AOERR1_SHFT 19 +#define UVH_EVENT_OCCURRED0_XN_AOERR1_MASK 0x0000000000080000UL +#define UVH_EVENT_OCCURRED0_SI_AOERR1_SHFT 20 +#define UVH_EVENT_OCCURRED0_SI_AOERR1_MASK 0x0000000000100000UL +#define UVH_EVENT_OCCURRED0_RH_VPI_INT_SHFT 21 +#define UVH_EVENT_OCCURRED0_RH_VPI_INT_MASK 0x0000000000200000UL +#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_SHFT 22 +#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_SHFT 23 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_MASK 0x0000000000800000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_SHFT 24 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_MASK 0x0000000001000000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_SHFT 25 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_MASK 0x0000000002000000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_SHFT 26 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_MASK 0x0000000004000000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_SHFT 27 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_MASK 0x0000000008000000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_SHFT 28 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_MASK 0x0000000010000000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_SHFT 29 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_MASK 0x0000000020000000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_SHFT 30 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_MASK 0x0000000040000000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_SHFT 31 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_MASK 0x0000000080000000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_SHFT 32 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_MASK 0x0000000100000000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_SHFT 33 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_MASK 0x0000000200000000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_SHFT 34 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_MASK 0x0000000400000000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_SHFT 35 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_MASK 0x0000000800000000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_SHFT 36 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_MASK 0x0000001000000000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_SHFT 37 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_MASK 0x0000002000000000UL +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_SHFT 38 +#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_MASK 0x0000004000000000UL +#define UVH_EVENT_OCCURRED0_L1_NMI_INT_SHFT 39 +#define UVH_EVENT_OCCURRED0_L1_NMI_INT_MASK 0x0000008000000000UL +#define UVH_EVENT_OCCURRED0_STOP_CLOCK_SHFT 40 +#define UVH_EVENT_OCCURRED0_STOP_CLOCK_MASK 0x0000010000000000UL +#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_SHFT 41 +#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_MASK 0x0000020000000000UL +#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_SHFT 42 +#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_MASK 0x0000040000000000UL +#define UVH_EVENT_OCCURRED0_LTC_INT_SHFT 43 +#define UVH_EVENT_OCCURRED0_LTC_INT_MASK 0x0000080000000000UL +#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_SHFT 44 +#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL +#define UVH_EVENT_OCCURRED0_IPI_INT_SHFT 45 +#define UVH_EVENT_OCCURRED0_IPI_INT_MASK 0x0000200000000000UL +#define UVH_EVENT_OCCURRED0_EXTIO_INT0_SHFT 46 +#define UVH_EVENT_OCCURRED0_EXTIO_INT0_MASK 0x0000400000000000UL +#define UVH_EVENT_OCCURRED0_EXTIO_INT1_SHFT 47 +#define UVH_EVENT_OCCURRED0_EXTIO_INT1_MASK 0x0000800000000000UL +#define UVH_EVENT_OCCURRED0_EXTIO_INT2_SHFT 48 +#define UVH_EVENT_OCCURRED0_EXTIO_INT2_MASK 0x0001000000000000UL +#define UVH_EVENT_OCCURRED0_EXTIO_INT3_SHFT 49 +#define UVH_EVENT_OCCURRED0_EXTIO_INT3_MASK 0x0002000000000000UL +#define UVH_EVENT_OCCURRED0_PROFILE_INT_SHFT 50 +#define UVH_EVENT_OCCURRED0_PROFILE_INT_MASK 0x0004000000000000UL +#define UVH_EVENT_OCCURRED0_RTC0_SHFT 51 +#define UVH_EVENT_OCCURRED0_RTC0_MASK 0x0008000000000000UL +#define UVH_EVENT_OCCURRED0_RTC1_SHFT 52 +#define UVH_EVENT_OCCURRED0_RTC1_MASK 0x0010000000000000UL +#define UVH_EVENT_OCCURRED0_RTC2_SHFT 53 +#define UVH_EVENT_OCCURRED0_RTC2_MASK 0x0020000000000000UL +#define UVH_EVENT_OCCURRED0_RTC3_SHFT 54 +#define UVH_EVENT_OCCURRED0_RTC3_MASK 0x0040000000000000UL +#define UVH_EVENT_OCCURRED0_BAU_DATA_SHFT 55 +#define UVH_EVENT_OCCURRED0_BAU_DATA_MASK 0x0080000000000000UL +#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_SHFT 56 +#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_MASK 0x0100000000000000UL +union uvh_event_occurred0_u { + unsigned long v; + struct uvh_event_occurred0_s { + unsigned long lb_hcerr : 1; /* RW, W1C */ + unsigned long gr0_hcerr : 1; /* RW, W1C */ + unsigned long gr1_hcerr : 1; /* RW, W1C */ + unsigned long lh_hcerr : 1; /* RW, W1C */ + unsigned long rh_hcerr : 1; /* RW, W1C */ + unsigned long xn_hcerr : 1; /* RW, W1C */ + unsigned long si_hcerr : 1; /* RW, W1C */ + unsigned long lb_aoerr0 : 1; /* RW, W1C */ + unsigned long gr0_aoerr0 : 1; /* RW, W1C */ + unsigned long gr1_aoerr0 : 1; /* RW, W1C */ + unsigned long lh_aoerr0 : 1; /* RW, W1C */ + unsigned long rh_aoerr0 : 1; /* RW, W1C */ + unsigned long xn_aoerr0 : 1; /* RW, W1C */ + unsigned long si_aoerr0 : 1; /* RW, W1C */ + unsigned long lb_aoerr1 : 1; /* RW, W1C */ + unsigned long gr0_aoerr1 : 1; /* RW, W1C */ + unsigned long gr1_aoerr1 : 1; /* RW, W1C */ + unsigned long lh_aoerr1 : 1; /* RW, W1C */ + unsigned long rh_aoerr1 : 1; /* RW, W1C */ + unsigned long xn_aoerr1 : 1; /* RW, W1C */ + unsigned long si_aoerr1 : 1; /* RW, W1C */ + unsigned long rh_vpi_int : 1; /* RW, W1C */ + unsigned long system_shutdown_int : 1; /* RW, W1C */ + unsigned long lb_irq_int_0 : 1; /* RW, W1C */ + unsigned long lb_irq_int_1 : 1; /* RW, W1C */ + unsigned long lb_irq_int_2 : 1; /* RW, W1C */ + unsigned long lb_irq_int_3 : 1; /* RW, W1C */ + unsigned long lb_irq_int_4 : 1; /* RW, W1C */ + unsigned long lb_irq_int_5 : 1; /* RW, W1C */ + unsigned long lb_irq_int_6 : 1; /* RW, W1C */ + unsigned long lb_irq_int_7 : 1; /* RW, W1C */ + unsigned long lb_irq_int_8 : 1; /* RW, W1C */ + unsigned long lb_irq_int_9 : 1; /* RW, W1C */ + unsigned long lb_irq_int_10 : 1; /* RW, W1C */ + unsigned long lb_irq_int_11 : 1; /* RW, W1C */ + unsigned long lb_irq_int_12 : 1; /* RW, W1C */ + unsigned long lb_irq_int_13 : 1; /* RW, W1C */ + unsigned long lb_irq_int_14 : 1; /* RW, W1C */ + unsigned long lb_irq_int_15 : 1; /* RW, W1C */ + unsigned long l1_nmi_int : 1; /* RW, W1C */ + unsigned long stop_clock : 1; /* RW, W1C */ + unsigned long asic_to_l1 : 1; /* RW, W1C */ + unsigned long l1_to_asic : 1; /* RW, W1C */ + unsigned long ltc_int : 1; /* RW, W1C */ + unsigned long la_seq_trigger : 1; /* RW, W1C */ + unsigned long ipi_int : 1; /* RW, W1C */ + unsigned long extio_int0 : 1; /* RW, W1C */ + unsigned long extio_int1 : 1; /* RW, W1C */ + unsigned long extio_int2 : 1; /* RW, W1C */ + unsigned long extio_int3 : 1; /* RW, W1C */ + unsigned long profile_int : 1; /* RW, W1C */ + unsigned long rtc0 : 1; /* RW, W1C */ + unsigned long rtc1 : 1; /* RW, W1C */ + unsigned long rtc2 : 1; /* RW, W1C */ + unsigned long rtc3 : 1; /* RW, W1C */ + unsigned long bau_data : 1; /* RW, W1C */ + unsigned long power_management_req : 1; /* RW, W1C */ + unsigned long rsvd_57_63 : 7; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_EVENT_OCCURRED0_ALIAS */ +/* ========================================================================= */ +#define UVH_EVENT_OCCURRED0_ALIAS 0x0000000000070008UL +#define UVH_EVENT_OCCURRED0_ALIAS_32 0x005f0 + +/* ========================================================================= */ +/* UVH_INT_CMPB */ +/* ========================================================================= */ +#define UVH_INT_CMPB 0x22080UL + +#define UVH_INT_CMPB_REAL_TIME_CMPB_SHFT 0 +#define UVH_INT_CMPB_REAL_TIME_CMPB_MASK 0x00ffffffffffffffUL + +union uvh_int_cmpb_u { + unsigned long v; + struct uvh_int_cmpb_s { + unsigned long real_time_cmpb : 56; /* RW */ + unsigned long rsvd_56_63 : 8; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_INT_CMPC */ +/* ========================================================================= */ +#define UVH_INT_CMPC 0x22100UL + +#define UVH_INT_CMPC_REAL_TIME_CMPC_SHFT 0 +#define UVH_INT_CMPC_REAL_TIME_CMPC_MASK 0x00ffffffffffffffUL + +union uvh_int_cmpc_u { + unsigned long v; + struct uvh_int_cmpc_s { + unsigned long real_time_cmpc : 56; /* RW */ + unsigned long rsvd_56_63 : 8; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_INT_CMPD */ +/* ========================================================================= */ +#define UVH_INT_CMPD 0x22180UL + +#define UVH_INT_CMPD_REAL_TIME_CMPD_SHFT 0 +#define UVH_INT_CMPD_REAL_TIME_CMPD_MASK 0x00ffffffffffffffUL + +union uvh_int_cmpd_u { + unsigned long v; + struct uvh_int_cmpd_s { + unsigned long real_time_cmpd : 56; /* RW */ + unsigned long rsvd_56_63 : 8; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_NODE_ID */ +/* ========================================================================= */ +#define UVH_NODE_ID 0x0UL + +#define UVH_NODE_ID_FORCE1_SHFT 0 +#define UVH_NODE_ID_FORCE1_MASK 0x0000000000000001UL +#define UVH_NODE_ID_MANUFACTURER_SHFT 1 +#define UVH_NODE_ID_MANUFACTURER_MASK 0x0000000000000ffeUL +#define UVH_NODE_ID_PART_NUMBER_SHFT 12 +#define UVH_NODE_ID_PART_NUMBER_MASK 0x000000000ffff000UL +#define UVH_NODE_ID_REVISION_SHFT 28 +#define UVH_NODE_ID_REVISION_MASK 0x00000000f0000000UL +#define UVH_NODE_ID_NODE_ID_SHFT 32 +#define UVH_NODE_ID_NODE_ID_MASK 0x00007fff00000000UL +#define UVH_NODE_ID_NODES_PER_BIT_SHFT 48 +#define UVH_NODE_ID_NODES_PER_BIT_MASK 0x007f000000000000UL +#define UVH_NODE_ID_NI_PORT_SHFT 56 +#define UVH_NODE_ID_NI_PORT_MASK 0x0f00000000000000UL + +union uvh_node_id_u { + unsigned long v; + struct uvh_node_id_s { + unsigned long force1 : 1; /* RO */ + unsigned long manufacturer : 11; /* RO */ + unsigned long part_number : 16; /* RO */ + unsigned long revision : 4; /* RO */ + unsigned long node_id : 15; /* RW */ + unsigned long rsvd_47 : 1; /* */ + unsigned long nodes_per_bit : 7; /* RW */ + unsigned long rsvd_55 : 1; /* */ + unsigned long ni_port : 4; /* RO */ + unsigned long rsvd_60_63 : 4; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR */ +/* ========================================================================= */ +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL + +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24 +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL + +union uvh_rh_gam_alias210_redirect_config_0_mmr_u { + unsigned long v; + struct uvh_rh_gam_alias210_redirect_config_0_mmr_s { + unsigned long rsvd_0_23 : 24; /* */ + unsigned long dest_base : 22; /* RW */ + unsigned long rsvd_46_63: 18; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR */ +/* ========================================================================= */ +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL + +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24 +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL + +union uvh_rh_gam_alias210_redirect_config_1_mmr_u { + unsigned long v; + struct uvh_rh_gam_alias210_redirect_config_1_mmr_s { + unsigned long rsvd_0_23 : 24; /* */ + unsigned long dest_base : 22; /* RW */ + unsigned long rsvd_46_63: 18; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR */ +/* ========================================================================= */ +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL + +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24 +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL + +union uvh_rh_gam_alias210_redirect_config_2_mmr_u { + unsigned long v; + struct uvh_rh_gam_alias210_redirect_config_2_mmr_s { + unsigned long rsvd_0_23 : 24; /* */ + unsigned long dest_base : 22; /* RW */ + unsigned long rsvd_46_63: 18; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR */ +/* ========================================================================= */ +#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL + +#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28 +#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL +#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT 48 +#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_MASK 0x0001000000000000UL +#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52 +#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL +#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63 +#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL + +union uvh_rh_gam_gru_overlay_config_mmr_u { + unsigned long v; + struct uvh_rh_gam_gru_overlay_config_mmr_s { + unsigned long rsvd_0_27: 28; /* */ + unsigned long base : 18; /* RW */ + unsigned long rsvd_46_47: 2; /* */ + unsigned long gr4 : 1; /* RW */ + unsigned long rsvd_49_51: 3; /* */ + unsigned long n_gru : 4; /* RW */ + unsigned long rsvd_56_62: 7; /* */ + unsigned long enable : 1; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR */ +/* ========================================================================= */ +#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL + +#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26 +#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL +#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_SHFT 46 +#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_MASK 0x0000400000000000UL +#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63 +#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL + +union uvh_rh_gam_mmr_overlay_config_mmr_u { + unsigned long v; + struct uvh_rh_gam_mmr_overlay_config_mmr_s { + unsigned long rsvd_0_25: 26; /* */ + unsigned long base : 20; /* RW */ + unsigned long dual_hub : 1; /* RW */ + unsigned long rsvd_47_62: 16; /* */ + unsigned long enable : 1; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RTC */ +/* ========================================================================= */ +#define UVH_RTC 0x340000UL + +#define UVH_RTC_REAL_TIME_CLOCK_SHFT 0 +#define UVH_RTC_REAL_TIME_CLOCK_MASK 0x00ffffffffffffffUL + +union uvh_rtc_u { + unsigned long v; + struct uvh_rtc_s { + unsigned long real_time_clock : 56; /* RW */ + unsigned long rsvd_56_63 : 8; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RTC1_INT_CONFIG */ +/* ========================================================================= */ +#define UVH_RTC1_INT_CONFIG 0x615c0UL + +#define UVH_RTC1_INT_CONFIG_VECTOR_SHFT 0 +#define UVH_RTC1_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL +#define UVH_RTC1_INT_CONFIG_DM_SHFT 8 +#define UVH_RTC1_INT_CONFIG_DM_MASK 0x0000000000000700UL +#define UVH_RTC1_INT_CONFIG_DESTMODE_SHFT 11 +#define UVH_RTC1_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL +#define UVH_RTC1_INT_CONFIG_STATUS_SHFT 12 +#define UVH_RTC1_INT_CONFIG_STATUS_MASK 0x0000000000001000UL +#define UVH_RTC1_INT_CONFIG_P_SHFT 13 +#define UVH_RTC1_INT_CONFIG_P_MASK 0x0000000000002000UL +#define UVH_RTC1_INT_CONFIG_T_SHFT 15 +#define UVH_RTC1_INT_CONFIG_T_MASK 0x0000000000008000UL +#define UVH_RTC1_INT_CONFIG_M_SHFT 16 +#define UVH_RTC1_INT_CONFIG_M_MASK 0x0000000000010000UL +#define UVH_RTC1_INT_CONFIG_APIC_ID_SHFT 32 +#define UVH_RTC1_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL + +union uvh_rtc1_int_config_u { + unsigned long v; + struct uvh_rtc1_int_config_s { + unsigned long vector_ : 8; /* RW */ + unsigned long dm : 3; /* RW */ + unsigned long destmode : 1; /* RW */ + unsigned long status : 1; /* RO */ + unsigned long p : 1; /* RO */ + unsigned long rsvd_14 : 1; /* */ + unsigned long t : 1; /* RO */ + unsigned long m : 1; /* RW */ + unsigned long rsvd_17_31: 15; /* */ + unsigned long apic_id : 32; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RTC2_INT_CONFIG */ +/* ========================================================================= */ +#define UVH_RTC2_INT_CONFIG 0x61600UL + +#define UVH_RTC2_INT_CONFIG_VECTOR_SHFT 0 +#define UVH_RTC2_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL +#define UVH_RTC2_INT_CONFIG_DM_SHFT 8 +#define UVH_RTC2_INT_CONFIG_DM_MASK 0x0000000000000700UL +#define UVH_RTC2_INT_CONFIG_DESTMODE_SHFT 11 +#define UVH_RTC2_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL +#define UVH_RTC2_INT_CONFIG_STATUS_SHFT 12 +#define UVH_RTC2_INT_CONFIG_STATUS_MASK 0x0000000000001000UL +#define UVH_RTC2_INT_CONFIG_P_SHFT 13 +#define UVH_RTC2_INT_CONFIG_P_MASK 0x0000000000002000UL +#define UVH_RTC2_INT_CONFIG_T_SHFT 15 +#define UVH_RTC2_INT_CONFIG_T_MASK 0x0000000000008000UL +#define UVH_RTC2_INT_CONFIG_M_SHFT 16 +#define UVH_RTC2_INT_CONFIG_M_MASK 0x0000000000010000UL +#define UVH_RTC2_INT_CONFIG_APIC_ID_SHFT 32 +#define UVH_RTC2_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL + +union uvh_rtc2_int_config_u { + unsigned long v; + struct uvh_rtc2_int_config_s { + unsigned long vector_ : 8; /* RW */ + unsigned long dm : 3; /* RW */ + unsigned long destmode : 1; /* RW */ + unsigned long status : 1; /* RO */ + unsigned long p : 1; /* RO */ + unsigned long rsvd_14 : 1; /* */ + unsigned long t : 1; /* RO */ + unsigned long m : 1; /* RW */ + unsigned long rsvd_17_31: 15; /* */ + unsigned long apic_id : 32; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RTC3_INT_CONFIG */ +/* ========================================================================= */ +#define UVH_RTC3_INT_CONFIG 0x61640UL + +#define UVH_RTC3_INT_CONFIG_VECTOR_SHFT 0 +#define UVH_RTC3_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL +#define UVH_RTC3_INT_CONFIG_DM_SHFT 8 +#define UVH_RTC3_INT_CONFIG_DM_MASK 0x0000000000000700UL +#define UVH_RTC3_INT_CONFIG_DESTMODE_SHFT 11 +#define UVH_RTC3_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL +#define UVH_RTC3_INT_CONFIG_STATUS_SHFT 12 +#define UVH_RTC3_INT_CONFIG_STATUS_MASK 0x0000000000001000UL +#define UVH_RTC3_INT_CONFIG_P_SHFT 13 +#define UVH_RTC3_INT_CONFIG_P_MASK 0x0000000000002000UL +#define UVH_RTC3_INT_CONFIG_T_SHFT 15 +#define UVH_RTC3_INT_CONFIG_T_MASK 0x0000000000008000UL +#define UVH_RTC3_INT_CONFIG_M_SHFT 16 +#define UVH_RTC3_INT_CONFIG_M_MASK 0x0000000000010000UL +#define UVH_RTC3_INT_CONFIG_APIC_ID_SHFT 32 +#define UVH_RTC3_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL + +union uvh_rtc3_int_config_u { + unsigned long v; + struct uvh_rtc3_int_config_s { + unsigned long vector_ : 8; /* RW */ + unsigned long dm : 3; /* RW */ + unsigned long destmode : 1; /* RW */ + unsigned long status : 1; /* RO */ + unsigned long p : 1; /* RO */ + unsigned long rsvd_14 : 1; /* */ + unsigned long t : 1; /* RO */ + unsigned long m : 1; /* RW */ + unsigned long rsvd_17_31: 15; /* */ + unsigned long apic_id : 32; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RTC_INC_RATIO */ +/* ========================================================================= */ +#define UVH_RTC_INC_RATIO 0x350000UL + +#define UVH_RTC_INC_RATIO_FRACTION_SHFT 0 +#define UVH_RTC_INC_RATIO_FRACTION_MASK 0x00000000000fffffUL +#define UVH_RTC_INC_RATIO_RATIO_SHFT 20 +#define UVH_RTC_INC_RATIO_RATIO_MASK 0x0000000000700000UL + +union uvh_rtc_inc_ratio_u { + unsigned long v; + struct uvh_rtc_inc_ratio_s { + unsigned long fraction : 20; /* RW */ + unsigned long ratio : 3; /* RW */ + unsigned long rsvd_23_63: 41; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_SI_ADDR_MAP_CONFIG */ +/* ========================================================================= */ +#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL + +#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0 +#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL +#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8 +#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL + +union uvh_si_addr_map_config_u { + unsigned long v; + struct uvh_si_addr_map_config_s { + unsigned long m_skt : 6; /* RW */ + unsigned long rsvd_6_7: 2; /* */ + unsigned long n_skt : 4; /* RW */ + unsigned long rsvd_12_63: 52; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_SI_ALIAS0_OVERLAY_CONFIG */ +/* ========================================================================= */ +#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL + +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24 +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48 +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63 +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL + +union uvh_si_alias0_overlay_config_u { + unsigned long v; + struct uvh_si_alias0_overlay_config_s { + unsigned long rsvd_0_23: 24; /* */ + unsigned long base : 8; /* RW */ + unsigned long rsvd_32_47: 16; /* */ + unsigned long m_alias : 5; /* RW */ + unsigned long rsvd_53_62: 10; /* */ + unsigned long enable : 1; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_SI_ALIAS1_OVERLAY_CONFIG */ +/* ========================================================================= */ +#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL + +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24 +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48 +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63 +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL + +union uvh_si_alias1_overlay_config_u { + unsigned long v; + struct uvh_si_alias1_overlay_config_s { + unsigned long rsvd_0_23: 24; /* */ + unsigned long base : 8; /* RW */ + unsigned long rsvd_32_47: 16; /* */ + unsigned long m_alias : 5; /* RW */ + unsigned long rsvd_53_62: 10; /* */ + unsigned long enable : 1; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_SI_ALIAS2_OVERLAY_CONFIG */ +/* ========================================================================= */ +#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL + +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24 +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48 +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63 +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL + +union uvh_si_alias2_overlay_config_u { + unsigned long v; + struct uvh_si_alias2_overlay_config_s { + unsigned long rsvd_0_23: 24; /* */ + unsigned long base : 8; /* RW */ + unsigned long rsvd_32_47: 16; /* */ + unsigned long m_alias : 5; /* RW */ + unsigned long rsvd_53_62: 10; /* */ + unsigned long enable : 1; /* RW */ + } s; +}; + + +#endif /* __ASM_IA64_UV_MMRS__ */ diff --git a/arch/ia64/include/asm/vga.h b/arch/ia64/include/asm/vga.h new file mode 100644 index 000000000000..02184ecd8208 --- /dev/null +++ b/arch/ia64/include/asm/vga.h @@ -0,0 +1,25 @@ +/* + * Access to VGA videoram + * + * (c) 1998 Martin Mares + * (c) 1999 Asit Mallick + * (c) 1999 Don Dugger + */ + +#ifndef __ASM_IA64_VGA_H_ +#define __ASM_IA64_VGA_H_ + +/* + * On the PC, we can just recalculate addresses and then access the + * videoram directly without any black magic. + */ + +extern unsigned long vga_console_iobase; +extern unsigned long vga_console_membase; + +#define VGA_MAP_MEM(x,s) ((unsigned long) ioremap_nocache(vga_console_membase + (x), s)) + +#define vga_readb(x) (*(x)) +#define vga_writeb(x,y) (*(y) = (x)) + +#endif /* __ASM_IA64_VGA_H_ */ diff --git a/arch/ia64/include/asm/xor.h b/arch/ia64/include/asm/xor.h new file mode 100644 index 000000000000..a349e23dea15 --- /dev/null +++ b/arch/ia64/include/asm/xor.h @@ -0,0 +1,31 @@ +/* + * Optimized RAID-5 checksumming functions for IA-64. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * You should have received a copy of the GNU General Public License + * (for example /usr/src/linux/COPYING); if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +extern void xor_ia64_2(unsigned long, unsigned long *, unsigned long *); +extern void xor_ia64_3(unsigned long, unsigned long *, unsigned long *, + unsigned long *); +extern void xor_ia64_4(unsigned long, unsigned long *, unsigned long *, + unsigned long *, unsigned long *); +extern void xor_ia64_5(unsigned long, unsigned long *, unsigned long *, + unsigned long *, unsigned long *, unsigned long *); + +static struct xor_block_template xor_block_ia64 = { + .name = "ia64", + .do_2 = xor_ia64_2, + .do_3 = xor_ia64_3, + .do_4 = xor_ia64_4, + .do_5 = xor_ia64_5, +}; + +#define XOR_TRY_TEMPLATES xor_speed(&xor_block_ia64) diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c index c64a55af9b95..94c44b1ccfd0 100644 --- a/arch/ia64/kernel/asm-offsets.c +++ b/arch/ia64/kernel/asm-offsets.c @@ -10,11 +10,11 @@ #include #include #include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include #include "../kernel/sigframe.h" #include "../kernel/fsyscall_gtod_data.h" diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S index db540e58c783..41c712917ff7 100644 --- a/arch/ia64/kernel/head.S +++ b/arch/ia64/kernel/head.S @@ -1123,7 +1123,7 @@ SET_REG(b5); * p15 - used to track flag status. * * If you patch this code to use more registers, do not forget to update - * the clobber lists for spin_lock() in include/asm-ia64/spinlock.h. + * the clobber lists for spin_lock() in arch/ia64/include/asm/spinlock.h. */ #if (__GNUC__ == 3 && __GNUC_MINOR__ < 3) diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 3bc2fa64f87f..5c4674ae8aea 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -69,7 +69,7 @@ * systems, we use one-to-one mapping between IA-64 vector and IRQ. A * platform can implement platform_irq_to_vector(irq) and * platform_local_vector_to_irq(vector) APIs to differentiate the mapping. - * Please see also include/asm-ia64/hw_irq.h for those APIs. + * Please see also arch/ia64/include/asm/hw_irq.h for those APIs. * * To sum up, there are three levels of mappings involved: * diff --git a/arch/ia64/kernel/jprobes.S b/arch/ia64/kernel/jprobes.S index 621630256c4a..f69389c7be1d 100644 --- a/arch/ia64/kernel/jprobes.S +++ b/arch/ia64/kernel/jprobes.S @@ -45,7 +45,7 @@ * to the correct location. */ #include -#include +#include /* * void jprobe_break(void) diff --git a/arch/ia64/kernel/nr-irqs.c b/arch/ia64/kernel/nr-irqs.c index 1ae049181e83..8273afc32db8 100644 --- a/arch/ia64/kernel/nr-irqs.c +++ b/arch/ia64/kernel/nr-irqs.c @@ -9,7 +9,7 @@ #include #include -#include +#include void foo(void) { diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index e5c2de9b29a5..593279f33e96 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -314,7 +314,7 @@ static inline void __init setup_crashkernel(unsigned long total, int *n) * * Setup the reserved memory areas set aside for the boot parameters, * initrd, etc. There are currently %IA64_MAX_RSVD_REGIONS defined, - * see include/asm-ia64/meminit.h if you need to define more. + * see arch/ia64/include/asm/meminit.h if you need to define more. */ void __init reserve_memory (void) diff --git a/arch/ia64/sn/kernel/iomv.c b/arch/ia64/sn/kernel/iomv.c index ab7e2fd40798..c77ebdf98119 100644 --- a/arch/ia64/sn/kernel/iomv.c +++ b/arch/ia64/sn/kernel/iomv.c @@ -63,7 +63,7 @@ EXPORT_SYMBOL(sn_io_addr); /** * __sn_mmiowb - I/O space memory barrier * - * See include/asm-ia64/io.h and Documentation/DocBook/deviceiobook.tmpl + * See arch/ia64/include/asm/io.h and Documentation/DocBook/deviceiobook.tmpl * for details. * * On SN2, we wait for the PIO_WRITE_STATUS SHub register to clear. diff --git a/include/asm-ia64/Kbuild b/include/asm-ia64/Kbuild deleted file mode 100644 index ccbe8ae47a61..000000000000 --- a/include/asm-ia64/Kbuild +++ /dev/null @@ -1,16 +0,0 @@ -include include/asm-generic/Kbuild.asm - -header-y += break.h -header-y += fpu.h -header-y += fpswa.h -header-y += ia64regs.h -header-y += intel_intrin.h -header-y += perfmon_default_smpl.h -header-y += ptrace_offsets.h -header-y += rse.h -header-y += ucontext.h - -unifdef-y += gcc_intrin.h -unifdef-y += intrinsics.h -unifdef-y += perfmon.h -unifdef-y += ustack.h diff --git a/include/asm-ia64/a.out.h b/include/asm-ia64/a.out.h deleted file mode 100644 index 193dcfb67596..000000000000 --- a/include/asm-ia64/a.out.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef _ASM_IA64_A_OUT_H -#define _ASM_IA64_A_OUT_H - -/* - * No a.out format has been (or should be) defined so this file is - * just a dummy that allows us to get binfmt_elf compiled. It - * probably would be better to clean up binfmt_elf.c so it does not - * necessarily depend on there being a.out support. - * - * Modified 1998-2002 - * David Mosberger-Tang , Hewlett-Packard Co. - */ - -#include - -struct exec { - unsigned long a_info; - unsigned long a_text; - unsigned long a_data; - unsigned long a_bss; - unsigned long a_entry; -}; - -#define N_TXTADDR(x) 0 -#define N_DATADDR(x) 0 -#define N_BSSADDR(x) 0 -#define N_DRSIZE(x) 0 -#define N_TRSIZE(x) 0 -#define N_SYMSIZE(x) 0 -#define N_TXTOFF(x) 0 - -#endif /* _ASM_IA64_A_OUT_H */ diff --git a/include/asm-ia64/acpi-ext.h b/include/asm-ia64/acpi-ext.h deleted file mode 100644 index 734d137dda6e..000000000000 --- a/include/asm-ia64/acpi-ext.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * (c) Copyright 2003, 2006 Hewlett-Packard Development Company, L.P. - * Alex Williamson - * Bjorn Helgaas - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Vendor specific extensions to ACPI. - */ - -#ifndef _ASM_IA64_ACPI_EXT_H -#define _ASM_IA64_ACPI_EXT_H - -#include -#include - -extern acpi_status hp_acpi_csr_space (acpi_handle, u64 *base, u64 *length); - -#endif /* _ASM_IA64_ACPI_EXT_H */ diff --git a/include/asm-ia64/acpi.h b/include/asm-ia64/acpi.h deleted file mode 100644 index fcfad326f4c7..000000000000 --- a/include/asm-ia64/acpi.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * asm-ia64/acpi.h - * - * Copyright (C) 1999 VA Linux Systems - * Copyright (C) 1999 Walt Drummond - * Copyright (C) 2000,2001 J.I. Lee - * Copyright (C) 2001,2002 Paul Diefenbaugh - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - */ - -#ifndef _ASM_ACPI_H -#define _ASM_ACPI_H - -#ifdef __KERNEL__ - -#include - -#include -#include -#include -#include - -#define COMPILER_DEPENDENT_INT64 long -#define COMPILER_DEPENDENT_UINT64 unsigned long - -/* - * Calling conventions: - * - * ACPI_SYSTEM_XFACE - Interfaces to host OS (handlers, threads) - * ACPI_EXTERNAL_XFACE - External ACPI interfaces - * ACPI_INTERNAL_XFACE - Internal ACPI interfaces - * ACPI_INTERNAL_VAR_XFACE - Internal variable-parameter list interfaces - */ -#define ACPI_SYSTEM_XFACE -#define ACPI_EXTERNAL_XFACE -#define ACPI_INTERNAL_XFACE -#define ACPI_INTERNAL_VAR_XFACE - -/* Asm macros */ - -#define ACPI_ASM_MACROS -#define BREAKPOINT3 -#define ACPI_DISABLE_IRQS() local_irq_disable() -#define ACPI_ENABLE_IRQS() local_irq_enable() -#define ACPI_FLUSH_CPU_CACHE() - -static inline int -ia64_acpi_acquire_global_lock (unsigned int *lock) -{ - unsigned int old, new, val; - do { - old = *lock; - new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1)); - val = ia64_cmpxchg4_acq(lock, new, old); - } while (unlikely (val != old)); - return (new < 3) ? -1 : 0; -} - -static inline int -ia64_acpi_release_global_lock (unsigned int *lock) -{ - unsigned int old, new, val; - do { - old = *lock; - new = old & ~0x3; - val = ia64_cmpxchg4_acq(lock, new, old); - } while (unlikely (val != old)); - return old & 0x1; -} - -#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \ - ((Acq) = ia64_acpi_acquire_global_lock(&facs->global_lock)) - -#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \ - ((Acq) = ia64_acpi_release_global_lock(&facs->global_lock)) - -#define acpi_disabled 0 /* ACPI always enabled on IA64 */ -#define acpi_noirq 0 /* ACPI always enabled on IA64 */ -#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */ -#define acpi_strict 1 /* no ACPI spec workarounds on IA64 */ -#define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */ -static inline void disable_acpi(void) { } - -const char *acpi_get_sysname (void); -int acpi_request_vector (u32 int_type); -int acpi_gsi_to_irq (u32 gsi, unsigned int *irq); - -/* routines for saving/restoring kernel state */ -extern int acpi_save_state_mem(void); -extern void acpi_restore_state_mem(void); -extern unsigned long acpi_wakeup_address; - -/* - * Record the cpei override flag and current logical cpu. This is - * useful for CPU removal. - */ -extern unsigned int can_cpei_retarget(void); -extern unsigned int is_cpu_cpei_target(unsigned int cpu); -extern void set_cpei_target_cpu(unsigned int cpu); -extern unsigned int get_cpei_target_cpu(void); -extern void prefill_possible_map(void); -#ifdef CONFIG_ACPI_HOTPLUG_CPU -extern int additional_cpus; -#else -#define additional_cpus 0 -#endif - -#ifdef CONFIG_ACPI_NUMA -#if MAX_NUMNODES > 256 -#define MAX_PXM_DOMAINS MAX_NUMNODES -#else -#define MAX_PXM_DOMAINS (256) -#endif -extern int __devinitdata pxm_to_nid_map[MAX_PXM_DOMAINS]; -extern int __initdata nid_to_pxm_map[MAX_NUMNODES]; -#endif - -#define acpi_unlazy_tlb(x) - -#ifdef CONFIG_ACPI_NUMA -extern cpumask_t early_cpu_possible_map; -#define for_each_possible_early_cpu(cpu) \ - for_each_cpu_mask((cpu), early_cpu_possible_map) - -static inline void per_cpu_scan_finalize(int min_cpus, int reserve_cpus) -{ - int low_cpu, high_cpu; - int cpu; - int next_nid = 0; - - low_cpu = cpus_weight(early_cpu_possible_map); - - high_cpu = max(low_cpu, min_cpus); - high_cpu = min(high_cpu + reserve_cpus, NR_CPUS); - - for (cpu = low_cpu; cpu < high_cpu; cpu++) { - cpu_set(cpu, early_cpu_possible_map); - if (node_cpuid[cpu].nid == NUMA_NO_NODE) { - node_cpuid[cpu].nid = next_nid; - next_nid++; - if (next_nid >= num_online_nodes()) - next_nid = 0; - } - } -} -#endif /* CONFIG_ACPI_NUMA */ - -#endif /*__KERNEL__*/ - -#endif /*_ASM_ACPI_H*/ diff --git a/include/asm-ia64/agp.h b/include/asm-ia64/agp.h deleted file mode 100644 index c11fdd8ab4d7..000000000000 --- a/include/asm-ia64/agp.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef _ASM_IA64_AGP_H -#define _ASM_IA64_AGP_H - -/* - * IA-64 specific AGP definitions. - * - * Copyright (C) 2002-2003 Hewlett-Packard Co - * David Mosberger-Tang - */ - -/* - * To avoid memory-attribute aliasing issues, we require that the AGPGART engine operate - * in coherent mode, which lets us map the AGP memory as normal (write-back) memory - * (unlike x86, where it gets mapped "write-coalescing"). - */ -#define map_page_into_agp(page) /* nothing */ -#define unmap_page_from_agp(page) /* nothing */ -#define flush_agp_cache() mb() - -/* Convert a physical address to an address suitable for the GART. */ -#define phys_to_gart(x) (x) -#define gart_to_phys(x) (x) - -/* GATT allocation. Returns/accepts GATT kernel virtual address. */ -#define alloc_gatt_pages(order) \ - ((char *)__get_free_pages(GFP_KERNEL, (order))) -#define free_gatt_pages(table, order) \ - free_pages((unsigned long)(table), (order)) - -#endif /* _ASM_IA64_AGP_H */ diff --git a/include/asm-ia64/asmmacro.h b/include/asm-ia64/asmmacro.h deleted file mode 100644 index c1642fd64029..000000000000 --- a/include/asm-ia64/asmmacro.h +++ /dev/null @@ -1,135 +0,0 @@ -#ifndef _ASM_IA64_ASMMACRO_H -#define _ASM_IA64_ASMMACRO_H - -/* - * Copyright (C) 2000-2001, 2003-2004 Hewlett-Packard Co - * David Mosberger-Tang - */ - - -#define ENTRY(name) \ - .align 32; \ - .proc name; \ -name: - -#define ENTRY_MIN_ALIGN(name) \ - .align 16; \ - .proc name; \ -name: - -#define GLOBAL_ENTRY(name) \ - .global name; \ - ENTRY(name) - -#define END(name) \ - .endp name - -/* - * Helper macros to make unwind directives more readable: - */ - -/* prologue_gr: */ -#define ASM_UNW_PRLG_RP 0x8 -#define ASM_UNW_PRLG_PFS 0x4 -#define ASM_UNW_PRLG_PSP 0x2 -#define ASM_UNW_PRLG_PR 0x1 -#define ASM_UNW_PRLG_GRSAVE(ninputs) (32+(ninputs)) - -/* - * Helper macros for accessing user memory. - * - * When adding any new .section/.previous entries here, make sure to - * also add it to the DISCARD section in arch/ia64/kernel/gate.lds.S or - * unpleasant things will happen. - */ - - .section "__ex_table", "a" // declare section & section attributes - .previous - -# define EX(y,x...) \ - .xdata4 "__ex_table", 99f-., y-.; \ - [99:] x -# define EXCLR(y,x...) \ - .xdata4 "__ex_table", 99f-., y-.+4; \ - [99:] x - -/* - * Tag MCA recoverable instruction ranges. - */ - - .section "__mca_table", "a" // declare section & section attributes - .previous - -# define MCA_RECOVER_RANGE(y) \ - .xdata4 "__mca_table", y-., 99f-.; \ - [99:] - -/* - * Mark instructions that need a load of a virtual address patched to be - * a load of a physical address. We use this either in critical performance - * path (ivt.S - TLB miss processing) or in places where it might not be - * safe to use a "tpa" instruction (mca_asm.S - error recovery). - */ - .section ".data.patch.vtop", "a" // declare section & section attributes - .previous - -#define LOAD_PHYSICAL(pr, reg, obj) \ -[1:](pr)movl reg = obj; \ - .xdata4 ".data.patch.vtop", 1b-. - -/* - * For now, we always put in the McKinley E9 workaround. On CPUs that don't need it, - * we'll patch out the work-around bundles with NOPs, so their impact is minimal. - */ -#define DO_MCKINLEY_E9_WORKAROUND - -#ifdef DO_MCKINLEY_E9_WORKAROUND - .section ".data.patch.mckinley_e9", "a" - .previous -/* workaround for Itanium 2 Errata 9: */ -# define FSYS_RETURN \ - .xdata4 ".data.patch.mckinley_e9", 1f-.; \ -1:{ .mib; \ - nop.m 0; \ - mov r16=ar.pfs; \ - br.call.sptk.many b7=2f;; \ - }; \ -2:{ .mib; \ - nop.m 0; \ - mov ar.pfs=r16; \ - br.ret.sptk.many b6;; \ - } -#else -# define FSYS_RETURN br.ret.sptk.many b6 -#endif - -/* - * If physical stack register size is different from DEF_NUM_STACK_REG, - * dynamically patch the kernel for correct size. - */ - .section ".data.patch.phys_stack_reg", "a" - .previous -#define LOAD_PHYS_STACK_REG_SIZE(reg) \ -[1:] adds reg=IA64_NUM_PHYS_STACK_REG*8+8,r0; \ - .xdata4 ".data.patch.phys_stack_reg", 1b-. - -/* - * Up until early 2004, use of .align within a function caused bad unwind info. - * TEXT_ALIGN(n) expands into ".align n" if a fixed GAS is available or into nothing - * otherwise. - */ -#ifdef HAVE_WORKING_TEXT_ALIGN -# define TEXT_ALIGN(n) .align n -#else -# define TEXT_ALIGN(n) -#endif - -#ifdef HAVE_SERIALIZE_DIRECTIVE -# define dv_serialize_data .serialize.data -# define dv_serialize_instruction .serialize.instruction -#else -# define dv_serialize_data -# define dv_serialize_instruction -#endif - -#endif /* _ASM_IA64_ASMMACRO_H */ diff --git a/include/asm-ia64/atomic.h b/include/asm-ia64/atomic.h deleted file mode 100644 index 50c2b83fd5a0..000000000000 --- a/include/asm-ia64/atomic.h +++ /dev/null @@ -1,226 +0,0 @@ -#ifndef _ASM_IA64_ATOMIC_H -#define _ASM_IA64_ATOMIC_H - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - * - * NOTE: don't mess with the types below! The "unsigned long" and - * "int" types were carefully placed so as to ensure proper operation - * of the macros. - * - * Copyright (C) 1998, 1999, 2002-2003 Hewlett-Packard Co - * David Mosberger-Tang - */ -#include - -#include -#include - -/* - * On IA-64, counter must always be volatile to ensure that that the - * memory accesses are ordered. - */ -typedef struct { volatile __s32 counter; } atomic_t; -typedef struct { volatile __s64 counter; } atomic64_t; - -#define ATOMIC_INIT(i) ((atomic_t) { (i) }) -#define ATOMIC64_INIT(i) ((atomic64_t) { (i) }) - -#define atomic_read(v) ((v)->counter) -#define atomic64_read(v) ((v)->counter) - -#define atomic_set(v,i) (((v)->counter) = (i)) -#define atomic64_set(v,i) (((v)->counter) = (i)) - -static __inline__ int -ia64_atomic_add (int i, atomic_t *v) -{ - __s32 old, new; - CMPXCHG_BUGCHECK_DECL - - do { - CMPXCHG_BUGCHECK(v); - old = atomic_read(v); - new = old + i; - } while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old); - return new; -} - -static __inline__ int -ia64_atomic64_add (__s64 i, atomic64_t *v) -{ - __s64 old, new; - CMPXCHG_BUGCHECK_DECL - - do { - CMPXCHG_BUGCHECK(v); - old = atomic64_read(v); - new = old + i; - } while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old); - return new; -} - -static __inline__ int -ia64_atomic_sub (int i, atomic_t *v) -{ - __s32 old, new; - CMPXCHG_BUGCHECK_DECL - - do { - CMPXCHG_BUGCHECK(v); - old = atomic_read(v); - new = old - i; - } while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old); - return new; -} - -static __inline__ int -ia64_atomic64_sub (__s64 i, atomic64_t *v) -{ - __s64 old, new; - CMPXCHG_BUGCHECK_DECL - - do { - CMPXCHG_BUGCHECK(v); - old = atomic64_read(v); - new = old - i; - } while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old); - return new; -} - -#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new)) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -#define atomic64_cmpxchg(v, old, new) \ - (cmpxchg(&((v)->counter), old, new)) -#define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) - -static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - c = atomic_read(v); - for (;;) { - if (unlikely(c == (u))) - break; - old = atomic_cmpxchg((v), c, c + (a)); - if (likely(old == c)) - break; - c = old; - } - return c != (u); -} - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) -{ - long c, old; - c = atomic64_read(v); - for (;;) { - if (unlikely(c == (u))) - break; - old = atomic64_cmpxchg((v), c, c + (a)); - if (likely(old == c)) - break; - c = old; - } - return c != (u); -} - -#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) - -#define atomic_add_return(i,v) \ -({ \ - int __ia64_aar_i = (i); \ - (__builtin_constant_p(i) \ - && ( (__ia64_aar_i == 1) || (__ia64_aar_i == 4) \ - || (__ia64_aar_i == 8) || (__ia64_aar_i == 16) \ - || (__ia64_aar_i == -1) || (__ia64_aar_i == -4) \ - || (__ia64_aar_i == -8) || (__ia64_aar_i == -16))) \ - ? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter) \ - : ia64_atomic_add(__ia64_aar_i, v); \ -}) - -#define atomic64_add_return(i,v) \ -({ \ - long __ia64_aar_i = (i); \ - (__builtin_constant_p(i) \ - && ( (__ia64_aar_i == 1) || (__ia64_aar_i == 4) \ - || (__ia64_aar_i == 8) || (__ia64_aar_i == 16) \ - || (__ia64_aar_i == -1) || (__ia64_aar_i == -4) \ - || (__ia64_aar_i == -8) || (__ia64_aar_i == -16))) \ - ? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter) \ - : ia64_atomic64_add(__ia64_aar_i, v); \ -}) - -/* - * Atomically add I to V and return TRUE if the resulting value is - * negative. - */ -static __inline__ int -atomic_add_negative (int i, atomic_t *v) -{ - return atomic_add_return(i, v) < 0; -} - -static __inline__ int -atomic64_add_negative (__s64 i, atomic64_t *v) -{ - return atomic64_add_return(i, v) < 0; -} - -#define atomic_sub_return(i,v) \ -({ \ - int __ia64_asr_i = (i); \ - (__builtin_constant_p(i) \ - && ( (__ia64_asr_i == 1) || (__ia64_asr_i == 4) \ - || (__ia64_asr_i == 8) || (__ia64_asr_i == 16) \ - || (__ia64_asr_i == -1) || (__ia64_asr_i == -4) \ - || (__ia64_asr_i == -8) || (__ia64_asr_i == -16))) \ - ? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter) \ - : ia64_atomic_sub(__ia64_asr_i, v); \ -}) - -#define atomic64_sub_return(i,v) \ -({ \ - long __ia64_asr_i = (i); \ - (__builtin_constant_p(i) \ - && ( (__ia64_asr_i == 1) || (__ia64_asr_i == 4) \ - || (__ia64_asr_i == 8) || (__ia64_asr_i == 16) \ - || (__ia64_asr_i == -1) || (__ia64_asr_i == -4) \ - || (__ia64_asr_i == -8) || (__ia64_asr_i == -16))) \ - ? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter) \ - : ia64_atomic64_sub(__ia64_asr_i, v); \ -}) - -#define atomic_dec_return(v) atomic_sub_return(1, (v)) -#define atomic_inc_return(v) atomic_add_return(1, (v)) -#define atomic64_dec_return(v) atomic64_sub_return(1, (v)) -#define atomic64_inc_return(v) atomic64_add_return(1, (v)) - -#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) -#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) -#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0) -#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0) -#define atomic64_inc_and_test(v) (atomic64_add_return(1, (v)) == 0) - -#define atomic_add(i,v) atomic_add_return((i), (v)) -#define atomic_sub(i,v) atomic_sub_return((i), (v)) -#define atomic_inc(v) atomic_add(1, (v)) -#define atomic_dec(v) atomic_sub(1, (v)) - -#define atomic64_add(i,v) atomic64_add_return((i), (v)) -#define atomic64_sub(i,v) atomic64_sub_return((i), (v)) -#define atomic64_inc(v) atomic64_add(1, (v)) -#define atomic64_dec(v) atomic64_sub(1, (v)) - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include -#endif /* _ASM_IA64_ATOMIC_H */ diff --git a/include/asm-ia64/auxvec.h b/include/asm-ia64/auxvec.h deleted file mode 100644 index 23cebe5685b9..000000000000 --- a/include/asm-ia64/auxvec.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _ASM_IA64_AUXVEC_H -#define _ASM_IA64_AUXVEC_H - -/* - * Architecture-neutral AT_ values are in the range 0-17. Leave some room for more of - * them, start the architecture-specific ones at 32. - */ -#define AT_SYSINFO 32 -#define AT_SYSINFO_EHDR 33 - -#endif /* _ASM_IA64_AUXVEC_H */ diff --git a/include/asm-ia64/bitops.h b/include/asm-ia64/bitops.h deleted file mode 100644 index e2ca80037335..000000000000 --- a/include/asm-ia64/bitops.h +++ /dev/null @@ -1,468 +0,0 @@ -#ifndef _ASM_IA64_BITOPS_H -#define _ASM_IA64_BITOPS_H - -/* - * Copyright (C) 1998-2003 Hewlett-Packard Co - * David Mosberger-Tang - * - * 02/06/02 find_next_bit() and find_first_bit() added from Erich Focht's ia64 - * O(1) scheduler patch - */ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include -#include -#include - -/** - * set_bit - Atomically set a bit in memory - * @nr: the bit to set - * @addr: the address to start counting from - * - * This function is atomic and may not be reordered. See __set_bit() - * if you do not require the atomic guarantees. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - * - * The address must be (at least) "long" aligned. - * Note that there are driver (e.g., eepro100) which use these operations to - * operate on hw-defined data-structures, so we can't easily change these - * operations to force a bigger alignment. - * - * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). - */ -static __inline__ void -set_bit (int nr, volatile void *addr) -{ - __u32 bit, old, new; - volatile __u32 *m; - CMPXCHG_BUGCHECK_DECL - - m = (volatile __u32 *) addr + (nr >> 5); - bit = 1 << (nr & 31); - do { - CMPXCHG_BUGCHECK(m); - old = *m; - new = old | bit; - } while (cmpxchg_acq(m, old, new) != old); -} - -/** - * __set_bit - Set a bit in memory - * @nr: the bit to set - * @addr: the address to start counting from - * - * Unlike set_bit(), this function is non-atomic and may be reordered. - * If it's called on the same region of memory simultaneously, the effect - * may be that only one operation succeeds. - */ -static __inline__ void -__set_bit (int nr, volatile void *addr) -{ - *((__u32 *) addr + (nr >> 5)) |= (1 << (nr & 31)); -} - -/* - * clear_bit() has "acquire" semantics. - */ -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() do { /* skip */; } while (0) - -/** - * clear_bit - Clears a bit in memory - * @nr: Bit to clear - * @addr: Address to start counting from - * - * clear_bit() is atomic and may not be reordered. However, it does - * not contain a memory barrier, so if it is used for locking purposes, - * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() - * in order to ensure changes are visible on other processors. - */ -static __inline__ void -clear_bit (int nr, volatile void *addr) -{ - __u32 mask, old, new; - volatile __u32 *m; - CMPXCHG_BUGCHECK_DECL - - m = (volatile __u32 *) addr + (nr >> 5); - mask = ~(1 << (nr & 31)); - do { - CMPXCHG_BUGCHECK(m); - old = *m; - new = old & mask; - } while (cmpxchg_acq(m, old, new) != old); -} - -/** - * clear_bit_unlock - Clears a bit in memory with release - * @nr: Bit to clear - * @addr: Address to start counting from - * - * clear_bit_unlock() is atomic and may not be reordered. It does - * contain a memory barrier suitable for unlock type operations. - */ -static __inline__ void -clear_bit_unlock (int nr, volatile void *addr) -{ - __u32 mask, old, new; - volatile __u32 *m; - CMPXCHG_BUGCHECK_DECL - - m = (volatile __u32 *) addr + (nr >> 5); - mask = ~(1 << (nr & 31)); - do { - CMPXCHG_BUGCHECK(m); - old = *m; - new = old & mask; - } while (cmpxchg_rel(m, old, new) != old); -} - -/** - * __clear_bit_unlock - Non-atomically clears a bit in memory with release - * @nr: Bit to clear - * @addr: Address to start counting from - * - * Similarly to clear_bit_unlock, the implementation uses a store - * with release semantics. See also __raw_spin_unlock(). - */ -static __inline__ void -__clear_bit_unlock(int nr, void *addr) -{ - __u32 * const m = (__u32 *) addr + (nr >> 5); - __u32 const new = *m & ~(1 << (nr & 31)); - - ia64_st4_rel_nta(m, new); -} - -/** - * __clear_bit - Clears a bit in memory (non-atomic version) - * @nr: the bit to clear - * @addr: the address to start counting from - * - * Unlike clear_bit(), this function is non-atomic and may be reordered. - * If it's called on the same region of memory simultaneously, the effect - * may be that only one operation succeeds. - */ -static __inline__ void -__clear_bit (int nr, volatile void *addr) -{ - *((__u32 *) addr + (nr >> 5)) &= ~(1 << (nr & 31)); -} - -/** - * change_bit - Toggle a bit in memory - * @nr: Bit to toggle - * @addr: Address to start counting from - * - * change_bit() is atomic and may not be reordered. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ -static __inline__ void -change_bit (int nr, volatile void *addr) -{ - __u32 bit, old, new; - volatile __u32 *m; - CMPXCHG_BUGCHECK_DECL - - m = (volatile __u32 *) addr + (nr >> 5); - bit = (1 << (nr & 31)); - do { - CMPXCHG_BUGCHECK(m); - old = *m; - new = old ^ bit; - } while (cmpxchg_acq(m, old, new) != old); -} - -/** - * __change_bit - Toggle a bit in memory - * @nr: the bit to toggle - * @addr: the address to start counting from - * - * Unlike change_bit(), this function is non-atomic and may be reordered. - * If it's called on the same region of memory simultaneously, the effect - * may be that only one operation succeeds. - */ -static __inline__ void -__change_bit (int nr, volatile void *addr) -{ - *((__u32 *) addr + (nr >> 5)) ^= (1 << (nr & 31)); -} - -/** - * test_and_set_bit - Set a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies the acquisition side of the memory barrier. - */ -static __inline__ int -test_and_set_bit (int nr, volatile void *addr) -{ - __u32 bit, old, new; - volatile __u32 *m; - CMPXCHG_BUGCHECK_DECL - - m = (volatile __u32 *) addr + (nr >> 5); - bit = 1 << (nr & 31); - do { - CMPXCHG_BUGCHECK(m); - old = *m; - new = old | bit; - } while (cmpxchg_acq(m, old, new) != old); - return (old & bit) != 0; -} - -/** - * test_and_set_bit_lock - Set a bit and return its old value for lock - * @nr: Bit to set - * @addr: Address to count from - * - * This is the same as test_and_set_bit on ia64 - */ -#define test_and_set_bit_lock test_and_set_bit - -/** - * __test_and_set_bit - Set a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is non-atomic and can be reordered. - * If two examples of this operation race, one can appear to succeed - * but actually fail. You must protect multiple accesses with a lock. - */ -static __inline__ int -__test_and_set_bit (int nr, volatile void *addr) -{ - __u32 *p = (__u32 *) addr + (nr >> 5); - __u32 m = 1 << (nr & 31); - int oldbitset = (*p & m) != 0; - - *p |= m; - return oldbitset; -} - -/** - * test_and_clear_bit - Clear a bit and return its old value - * @nr: Bit to clear - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies the acquisition side of the memory barrier. - */ -static __inline__ int -test_and_clear_bit (int nr, volatile void *addr) -{ - __u32 mask, old, new; - volatile __u32 *m; - CMPXCHG_BUGCHECK_DECL - - m = (volatile __u32 *) addr + (nr >> 5); - mask = ~(1 << (nr & 31)); - do { - CMPXCHG_BUGCHECK(m); - old = *m; - new = old & mask; - } while (cmpxchg_acq(m, old, new) != old); - return (old & ~mask) != 0; -} - -/** - * __test_and_clear_bit - Clear a bit and return its old value - * @nr: Bit to clear - * @addr: Address to count from - * - * This operation is non-atomic and can be reordered. - * If two examples of this operation race, one can appear to succeed - * but actually fail. You must protect multiple accesses with a lock. - */ -static __inline__ int -__test_and_clear_bit(int nr, volatile void * addr) -{ - __u32 *p = (__u32 *) addr + (nr >> 5); - __u32 m = 1 << (nr & 31); - int oldbitset = *p & m; - - *p &= ~m; - return oldbitset; -} - -/** - * test_and_change_bit - Change a bit and return its old value - * @nr: Bit to change - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies the acquisition side of the memory barrier. - */ -static __inline__ int -test_and_change_bit (int nr, volatile void *addr) -{ - __u32 bit, old, new; - volatile __u32 *m; - CMPXCHG_BUGCHECK_DECL - - m = (volatile __u32 *) addr + (nr >> 5); - bit = (1 << (nr & 31)); - do { - CMPXCHG_BUGCHECK(m); - old = *m; - new = old ^ bit; - } while (cmpxchg_acq(m, old, new) != old); - return (old & bit) != 0; -} - -/** - * __test_and_change_bit - Change a bit and return its old value - * @nr: Bit to change - * @addr: Address to count from - * - * This operation is non-atomic and can be reordered. - */ -static __inline__ int -__test_and_change_bit (int nr, void *addr) -{ - __u32 old, bit = (1 << (nr & 31)); - __u32 *m = (__u32 *) addr + (nr >> 5); - - old = *m; - *m = old ^ bit; - return (old & bit) != 0; -} - -static __inline__ int -test_bit (int nr, const volatile void *addr) -{ - return 1 & (((const volatile __u32 *) addr)[nr >> 5] >> (nr & 31)); -} - -/** - * ffz - find the first zero bit in a long word - * @x: The long word to find the bit in - * - * Returns the bit-number (0..63) of the first (least significant) zero bit. - * Undefined if no zero exists, so code should check against ~0UL first... - */ -static inline unsigned long -ffz (unsigned long x) -{ - unsigned long result; - - result = ia64_popcnt(x & (~x - 1)); - return result; -} - -/** - * __ffs - find first bit in word. - * @x: The word to search - * - * Undefined if no bit exists, so code should check against 0 first. - */ -static __inline__ unsigned long -__ffs (unsigned long x) -{ - unsigned long result; - - result = ia64_popcnt((x-1) & ~x); - return result; -} - -#ifdef __KERNEL__ - -/* - * Return bit number of last (most-significant) bit set. Undefined - * for x==0. Bits are numbered from 0..63 (e.g., ia64_fls(9) == 3). - */ -static inline unsigned long -ia64_fls (unsigned long x) -{ - long double d = x; - long exp; - - exp = ia64_getf_exp(d); - return exp - 0xffff; -} - -/* - * Find the last (most significant) bit set. Returns 0 for x==0 and - * bits are numbered from 1..32 (e.g., fls(9) == 4). - */ -static inline int -fls (int t) -{ - unsigned long x = t & 0xffffffffu; - - if (!x) - return 0; - x |= x >> 1; - x |= x >> 2; - x |= x >> 4; - x |= x >> 8; - x |= x >> 16; - return ia64_popcnt(x); -} - -/* - * Find the last (most significant) bit set. Undefined for x==0. - * Bits are numbered from 0..63 (e.g., __fls(9) == 3). - */ -static inline unsigned long -__fls (unsigned long x) -{ - x |= x >> 1; - x |= x >> 2; - x |= x >> 4; - x |= x >> 8; - x |= x >> 16; - x |= x >> 32; - return ia64_popcnt(x) - 1; -} - -#include - -/* - * ffs: find first bit set. This is defined the same way as the libc and - * compiler builtin ffs routines, therefore differs in spirit from the above - * ffz (man ffs): it operates on "int" values only and the result value is the - * bit number + 1. ffs(0) is defined to return zero. - */ -#define ffs(x) __builtin_ffs(x) - -/* - * hweightN: returns the hamming weight (i.e. the number - * of bits set) of a N-bit word - */ -static __inline__ unsigned long -hweight64 (unsigned long x) -{ - unsigned long result; - result = ia64_popcnt(x); - return result; -} - -#define hweight32(x) (unsigned int) hweight64((x) & 0xfffffffful) -#define hweight16(x) (unsigned int) hweight64((x) & 0xfffful) -#define hweight8(x) (unsigned int) hweight64((x) & 0xfful) - -#endif /* __KERNEL__ */ - -#include - -#ifdef __KERNEL__ - -#include - -#define ext2_set_bit_atomic(l,n,a) test_and_set_bit(n,a) -#define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a) - -#include -#include - -#endif /* __KERNEL__ */ - -#endif /* _ASM_IA64_BITOPS_H */ diff --git a/include/asm-ia64/break.h b/include/asm-ia64/break.h deleted file mode 100644 index f03402039896..000000000000 --- a/include/asm-ia64/break.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _ASM_IA64_BREAK_H -#define _ASM_IA64_BREAK_H - -/* - * IA-64 Linux break numbers. - * - * Copyright (C) 1999 Hewlett-Packard Co - * Copyright (C) 1999 David Mosberger-Tang - */ - -/* - * OS-specific debug break numbers: - */ -#define __IA64_BREAK_KDB 0x80100 -#define __IA64_BREAK_KPROBE 0x81000 /* .. 0x81fff */ -#define __IA64_BREAK_JPROBE 0x82000 - -/* - * OS-specific break numbers: - */ -#define __IA64_BREAK_SYSCALL 0x100000 - -#endif /* _ASM_IA64_BREAK_H */ diff --git a/include/asm-ia64/bug.h b/include/asm-ia64/bug.h deleted file mode 100644 index 823616b5020b..000000000000 --- a/include/asm-ia64/bug.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _ASM_IA64_BUG_H -#define _ASM_IA64_BUG_H - -#ifdef CONFIG_BUG -#define ia64_abort() __builtin_trap() -#define BUG() do { printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); ia64_abort(); } while (0) - -/* should this BUG be made generic? */ -#define HAVE_ARCH_BUG -#endif - -#include - -#endif diff --git a/include/asm-ia64/bugs.h b/include/asm-ia64/bugs.h deleted file mode 100644 index 433523e3b2ed..000000000000 --- a/include/asm-ia64/bugs.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - * - * Based on . - * - * Modified 1998, 1999, 2003 - * David Mosberger-Tang , Hewlett-Packard Co. - */ -#ifndef _ASM_IA64_BUGS_H -#define _ASM_IA64_BUGS_H - -#include - -extern void check_bugs (void); - -#endif /* _ASM_IA64_BUGS_H */ diff --git a/include/asm-ia64/byteorder.h b/include/asm-ia64/byteorder.h deleted file mode 100644 index 69bd41d7c26e..000000000000 --- a/include/asm-ia64/byteorder.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASM_IA64_BYTEORDER_H -#define _ASM_IA64_BYTEORDER_H - -/* - * Modified 1998, 1999 - * David Mosberger-Tang , Hewlett-Packard Co. - */ - -#include -#include -#include - -static __inline__ __attribute_const__ __u64 -__ia64_swab64 (__u64 x) -{ - __u64 result; - - result = ia64_mux1(x, ia64_mux1_rev); - return result; -} - -static __inline__ __attribute_const__ __u32 -__ia64_swab32 (__u32 x) -{ - return __ia64_swab64(x) >> 32; -} - -static __inline__ __attribute_const__ __u16 -__ia64_swab16(__u16 x) -{ - return __ia64_swab64(x) >> 48; -} - -#define __arch__swab64(x) __ia64_swab64(x) -#define __arch__swab32(x) __ia64_swab32(x) -#define __arch__swab16(x) __ia64_swab16(x) - -#define __BYTEORDER_HAS_U64__ - -#include - -#endif /* _ASM_IA64_BYTEORDER_H */ diff --git a/include/asm-ia64/cache.h b/include/asm-ia64/cache.h deleted file mode 100644 index e7482bd628ff..000000000000 --- a/include/asm-ia64/cache.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _ASM_IA64_CACHE_H -#define _ASM_IA64_CACHE_H - - -/* - * Copyright (C) 1998-2000 Hewlett-Packard Co - * David Mosberger-Tang - */ - -/* Bytes per L1 (data) cache line. */ -#define L1_CACHE_SHIFT CONFIG_IA64_L1_CACHE_SHIFT -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -#ifdef CONFIG_SMP -# define SMP_CACHE_SHIFT L1_CACHE_SHIFT -# define SMP_CACHE_BYTES L1_CACHE_BYTES -#else - /* - * The "aligned" directive can only _increase_ alignment, so this is - * safe and provides an easy way to avoid wasting space on a - * uni-processor: - */ -# define SMP_CACHE_SHIFT 3 -# define SMP_CACHE_BYTES (1 << 3) -#endif - -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) - -#endif /* _ASM_IA64_CACHE_H */ diff --git a/include/asm-ia64/cacheflush.h b/include/asm-ia64/cacheflush.h deleted file mode 100644 index afcfbda76e20..000000000000 --- a/include/asm-ia64/cacheflush.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef _ASM_IA64_CACHEFLUSH_H -#define _ASM_IA64_CACHEFLUSH_H - -/* - * Copyright (C) 2002 Hewlett-Packard Co - * David Mosberger-Tang - */ - -#include -#include - -#include - -/* - * Cache flushing routines. This is the kind of stuff that can be very expensive, so try - * to avoid them whenever possible. - */ - -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_icache_page(vma,page) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -#define flush_dcache_page(page) \ -do { \ - clear_bit(PG_arch_1, &(page)->flags); \ -} while (0) - -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -extern void flush_icache_range (unsigned long start, unsigned long end); - -#define flush_icache_user_range(vma, page, user_addr, len) \ -do { \ - unsigned long _addr = (unsigned long) page_address(page) + ((user_addr) & ~PAGE_MASK); \ - flush_icache_range(_addr, _addr + (len)); \ -} while (0) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ -do { memcpy(dst, src, len); \ - flush_icache_user_range(vma, page, vaddr, len); \ -} while (0) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -#endif /* _ASM_IA64_CACHEFLUSH_H */ diff --git a/include/asm-ia64/checksum.h b/include/asm-ia64/checksum.h deleted file mode 100644 index 97af155057e4..000000000000 --- a/include/asm-ia64/checksum.h +++ /dev/null @@ -1,79 +0,0 @@ -#ifndef _ASM_IA64_CHECKSUM_H -#define _ASM_IA64_CHECKSUM_H - -/* - * Modified 1998, 1999 - * David Mosberger-Tang , Hewlett-Packard Co - */ - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - */ -extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -/* - * Computes the checksum of the TCP/UDP pseudo-header returns a 16-bit - * checksum, already complemented - */ -extern __sum16 csum_tcpudp_magic (__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum); - -extern __wsum csum_tcpudp_nofold (__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum); - -/* - * Computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -extern __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * Same as csum_partial, but copies from src while it checksums. - * - * Here it is even more important to align src and dst on a 32-bit (or - * even better 64-bit) boundary. - */ -extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, - int *errp); - -extern __wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum); - -/* - * This routine is used for miscellaneous IP-like checksums, mainly in - * icmp.c - */ -extern __sum16 ip_compute_csum(const void *buff, int len); - -/* - * Fold a partial checksum without adding pseudo headers. - */ -static inline __sum16 csum_fold(__wsum csum) -{ - u32 sum = (__force u32)csum; - sum = (sum & 0xffff) + (sum >> 16); - sum = (sum & 0xffff) + (sum >> 16); - return (__force __sum16)~sum; -} - -#define _HAVE_ARCH_IPV6_CSUM 1 -struct in6_addr; -extern __sum16 csum_ipv6_magic(const struct in6_addr *saddr, - const struct in6_addr *daddr, __u32 len, unsigned short proto, - __wsum csum); - -#endif /* _ASM_IA64_CHECKSUM_H */ diff --git a/include/asm-ia64/compat.h b/include/asm-ia64/compat.h deleted file mode 100644 index dfcf75b8426d..000000000000 --- a/include/asm-ia64/compat.h +++ /dev/null @@ -1,207 +0,0 @@ -#ifndef _ASM_IA64_COMPAT_H -#define _ASM_IA64_COMPAT_H -/* - * Architecture specific compatibility types - */ -#include - -#define COMPAT_USER_HZ 100 - -typedef u32 compat_size_t; -typedef s32 compat_ssize_t; -typedef s32 compat_time_t; -typedef s32 compat_clock_t; -typedef s32 compat_key_t; -typedef s32 compat_pid_t; -typedef u16 __compat_uid_t; -typedef u16 __compat_gid_t; -typedef u32 __compat_uid32_t; -typedef u32 __compat_gid32_t; -typedef u16 compat_mode_t; -typedef u32 compat_ino_t; -typedef u16 compat_dev_t; -typedef s32 compat_off_t; -typedef s64 compat_loff_t; -typedef u16 compat_nlink_t; -typedef u16 compat_ipc_pid_t; -typedef s32 compat_daddr_t; -typedef u32 compat_caddr_t; -typedef __kernel_fsid_t compat_fsid_t; -typedef s32 compat_timer_t; - -typedef s32 compat_int_t; -typedef s32 compat_long_t; -typedef s64 __attribute__((aligned(4))) compat_s64; -typedef u32 compat_uint_t; -typedef u32 compat_ulong_t; -typedef u64 __attribute__((aligned(4))) compat_u64; - -struct compat_timespec { - compat_time_t tv_sec; - s32 tv_nsec; -}; - -struct compat_timeval { - compat_time_t tv_sec; - s32 tv_usec; -}; - -struct compat_stat { - compat_dev_t st_dev; - u16 __pad1; - compat_ino_t st_ino; - compat_mode_t st_mode; - compat_nlink_t st_nlink; - __compat_uid_t st_uid; - __compat_gid_t st_gid; - compat_dev_t st_rdev; - u16 __pad2; - u32 st_size; - u32 st_blksize; - u32 st_blocks; - u32 st_atime; - u32 st_atime_nsec; - u32 st_mtime; - u32 st_mtime_nsec; - u32 st_ctime; - u32 st_ctime_nsec; - u32 __unused4; - u32 __unused5; -}; - -struct compat_flock { - short l_type; - short l_whence; - compat_off_t l_start; - compat_off_t l_len; - compat_pid_t l_pid; -}; - -#define F_GETLK64 12 -#define F_SETLK64 13 -#define F_SETLKW64 14 - -/* - * IA32 uses 4 byte alignment for 64 bit quantities, - * so we need to pack this structure. - */ -struct compat_flock64 { - short l_type; - short l_whence; - compat_loff_t l_start; - compat_loff_t l_len; - compat_pid_t l_pid; -} __attribute__((packed)); - -struct compat_statfs { - int f_type; - int f_bsize; - int f_blocks; - int f_bfree; - int f_bavail; - int f_files; - int f_ffree; - compat_fsid_t f_fsid; - int f_namelen; /* SunOS ignores this field. */ - int f_frsize; - int f_spare[5]; -}; - -#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff -#define COMPAT_RLIM_INFINITY 0xffffffff - -typedef u32 compat_old_sigset_t; /* at least 32 bits */ - -#define _COMPAT_NSIG 64 -#define _COMPAT_NSIG_BPW 32 - -typedef u32 compat_sigset_word; - -#define COMPAT_OFF_T_MAX 0x7fffffff -#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL - -struct compat_ipc64_perm { - compat_key_t key; - __compat_uid32_t uid; - __compat_gid32_t gid; - __compat_uid32_t cuid; - __compat_gid32_t cgid; - unsigned short mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - compat_ulong_t unused1; - compat_ulong_t unused2; -}; - -struct compat_semid64_ds { - struct compat_ipc64_perm sem_perm; - compat_time_t sem_otime; - compat_ulong_t __unused1; - compat_time_t sem_ctime; - compat_ulong_t __unused2; - compat_ulong_t sem_nsems; - compat_ulong_t __unused3; - compat_ulong_t __unused4; -}; - -struct compat_msqid64_ds { - struct compat_ipc64_perm msg_perm; - compat_time_t msg_stime; - compat_ulong_t __unused1; - compat_time_t msg_rtime; - compat_ulong_t __unused2; - compat_time_t msg_ctime; - compat_ulong_t __unused3; - compat_ulong_t msg_cbytes; - compat_ulong_t msg_qnum; - compat_ulong_t msg_qbytes; - compat_pid_t msg_lspid; - compat_pid_t msg_lrpid; - compat_ulong_t __unused4; - compat_ulong_t __unused5; -}; - -struct compat_shmid64_ds { - struct compat_ipc64_perm shm_perm; - compat_size_t shm_segsz; - compat_time_t shm_atime; - compat_ulong_t __unused1; - compat_time_t shm_dtime; - compat_ulong_t __unused2; - compat_time_t shm_ctime; - compat_ulong_t __unused3; - compat_pid_t shm_cpid; - compat_pid_t shm_lpid; - compat_ulong_t shm_nattch; - compat_ulong_t __unused4; - compat_ulong_t __unused5; -}; - -/* - * A pointer passed in from user mode. This should not be used for syscall parameters, - * just declare them as pointers because the syscall entry code will have appropriately - * converted them already. - */ -typedef u32 compat_uptr_t; - -static inline void __user * -compat_ptr (compat_uptr_t uptr) -{ - return (void __user *) (unsigned long) uptr; -} - -static inline compat_uptr_t -ptr_to_compat(void __user *uptr) -{ - return (u32)(unsigned long)uptr; -} - -static __inline__ void __user * -compat_alloc_user_space (long len) -{ - struct pt_regs *regs = task_pt_regs(current); - return (void __user *) (((regs->r12 & 0xffffffff) & -16) - len); -} - -#endif /* _ASM_IA64_COMPAT_H */ diff --git a/include/asm-ia64/cpu.h b/include/asm-ia64/cpu.h deleted file mode 100644 index fcca30b9f110..000000000000 --- a/include/asm-ia64/cpu.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _ASM_IA64_CPU_H_ -#define _ASM_IA64_CPU_H_ - -#include -#include -#include -#include - -struct ia64_cpu { - struct cpu cpu; -}; - -DECLARE_PER_CPU(struct ia64_cpu, cpu_devices); - -DECLARE_PER_CPU(int, cpu_state); - -#ifdef CONFIG_HOTPLUG_CPU -extern int arch_register_cpu(int num); -extern void arch_unregister_cpu(int); -#endif - -#endif /* _ASM_IA64_CPU_H_ */ diff --git a/include/asm-ia64/cputime.h b/include/asm-ia64/cputime.h deleted file mode 100644 index f9abdec6577a..000000000000 --- a/include/asm-ia64/cputime.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * include/asm-ia64/cputime.h: - * Definitions for measuring cputime on ia64 machines. - * - * Based on . - * - * Copyright (C) 2007 FUJITSU LIMITED - * Copyright (C) 2007 Hidetoshi Seto - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in nsec. - * Otherwise we measure cpu time in jiffies using the generic definitions. - */ - -#ifndef __IA64_CPUTIME_H -#define __IA64_CPUTIME_H - -#ifndef CONFIG_VIRT_CPU_ACCOUNTING -#include -#else - -#include -#include -#include - -typedef u64 cputime_t; -typedef u64 cputime64_t; - -#define cputime_zero ((cputime_t)0) -#define cputime_max ((~((cputime_t)0) >> 1) - 1) -#define cputime_add(__a, __b) ((__a) + (__b)) -#define cputime_sub(__a, __b) ((__a) - (__b)) -#define cputime_div(__a, __n) ((__a) / (__n)) -#define cputime_halve(__a) ((__a) >> 1) -#define cputime_eq(__a, __b) ((__a) == (__b)) -#define cputime_gt(__a, __b) ((__a) > (__b)) -#define cputime_ge(__a, __b) ((__a) >= (__b)) -#define cputime_lt(__a, __b) ((__a) < (__b)) -#define cputime_le(__a, __b) ((__a) <= (__b)) - -#define cputime64_zero ((cputime64_t)0) -#define cputime64_add(__a, __b) ((__a) + (__b)) -#define cputime64_sub(__a, __b) ((__a) - (__b)) -#define cputime_to_cputime64(__ct) (__ct) - -/* - * Convert cputime <-> jiffies (HZ) - */ -#define cputime_to_jiffies(__ct) ((__ct) / (NSEC_PER_SEC / HZ)) -#define jiffies_to_cputime(__jif) ((__jif) * (NSEC_PER_SEC / HZ)) -#define cputime64_to_jiffies64(__ct) ((__ct) / (NSEC_PER_SEC / HZ)) -#define jiffies64_to_cputime64(__jif) ((__jif) * (NSEC_PER_SEC / HZ)) - -/* - * Convert cputime <-> milliseconds - */ -#define cputime_to_msecs(__ct) ((__ct) / NSEC_PER_MSEC) -#define msecs_to_cputime(__msecs) ((__msecs) * NSEC_PER_MSEC) - -/* - * Convert cputime <-> seconds - */ -#define cputime_to_secs(__ct) ((__ct) / NSEC_PER_SEC) -#define secs_to_cputime(__secs) ((__secs) * NSEC_PER_SEC) - -/* - * Convert cputime <-> timespec (nsec) - */ -static inline cputime_t timespec_to_cputime(const struct timespec *val) -{ - cputime_t ret = val->tv_sec * NSEC_PER_SEC; - return (ret + val->tv_nsec); -} -static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val) -{ - val->tv_sec = ct / NSEC_PER_SEC; - val->tv_nsec = ct % NSEC_PER_SEC; -} - -/* - * Convert cputime <-> timeval (msec) - */ -static inline cputime_t timeval_to_cputime(struct timeval *val) -{ - cputime_t ret = val->tv_sec * NSEC_PER_SEC; - return (ret + val->tv_usec * NSEC_PER_USEC); -} -static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val) -{ - val->tv_sec = ct / NSEC_PER_SEC; - val->tv_usec = (ct % NSEC_PER_SEC) / NSEC_PER_USEC; -} - -/* - * Convert cputime <-> clock (USER_HZ) - */ -#define cputime_to_clock_t(__ct) ((__ct) / (NSEC_PER_SEC / USER_HZ)) -#define clock_t_to_cputime(__x) ((__x) * (NSEC_PER_SEC / USER_HZ)) - -/* - * Convert cputime64 to clock. - */ -#define cputime64_to_clock_t(__ct) cputime_to_clock_t((cputime_t)__ct) - -#endif /* CONFIG_VIRT_CPU_ACCOUNTING */ -#endif /* __IA64_CPUTIME_H */ diff --git a/include/asm-ia64/current.h b/include/asm-ia64/current.h deleted file mode 100644 index c659f90fbfd9..000000000000 --- a/include/asm-ia64/current.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _ASM_IA64_CURRENT_H -#define _ASM_IA64_CURRENT_H - -/* - * Modified 1998-2000 - * David Mosberger-Tang , Hewlett-Packard Co - */ - -#include - -/* - * In kernel mode, thread pointer (r13) is used to point to the current task - * structure. - */ -#define current ((struct task_struct *) ia64_getreg(_IA64_REG_TP)) - -#endif /* _ASM_IA64_CURRENT_H */ diff --git a/include/asm-ia64/cyclone.h b/include/asm-ia64/cyclone.h deleted file mode 100644 index 88f6500e84ab..000000000000 --- a/include/asm-ia64/cyclone.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef ASM_IA64_CYCLONE_H -#define ASM_IA64_CYCLONE_H - -#ifdef CONFIG_IA64_CYCLONE -extern int use_cyclone; -extern void __init cyclone_setup(void); -#else /* CONFIG_IA64_CYCLONE */ -#define use_cyclone 0 -static inline void cyclone_setup(void) -{ - printk(KERN_ERR "Cyclone Counter: System not configured" - " w/ CONFIG_IA64_CYCLONE.\n"); -} -#endif /* CONFIG_IA64_CYCLONE */ -#endif /* !ASM_IA64_CYCLONE_H */ diff --git a/include/asm-ia64/delay.h b/include/asm-ia64/delay.h deleted file mode 100644 index a30a62f235e1..000000000000 --- a/include/asm-ia64/delay.h +++ /dev/null @@ -1,88 +0,0 @@ -#ifndef _ASM_IA64_DELAY_H -#define _ASM_IA64_DELAY_H - -/* - * Delay routines using a pre-computed "cycles/usec" value. - * - * Copyright (C) 1998, 1999 Hewlett-Packard Co - * David Mosberger-Tang - * Copyright (C) 1999 VA Linux Systems - * Copyright (C) 1999 Walt Drummond - * Copyright (C) 1999 Asit Mallick - * Copyright (C) 1999 Don Dugger - */ - -#include -#include -#include - -#include -#include - -static __inline__ void -ia64_set_itm (unsigned long val) -{ - ia64_setreg(_IA64_REG_CR_ITM, val); - ia64_srlz_d(); -} - -static __inline__ unsigned long -ia64_get_itm (void) -{ - unsigned long result; - - result = ia64_getreg(_IA64_REG_CR_ITM); - ia64_srlz_d(); - return result; -} - -static __inline__ void -ia64_set_itv (unsigned long val) -{ - ia64_setreg(_IA64_REG_CR_ITV, val); - ia64_srlz_d(); -} - -static __inline__ unsigned long -ia64_get_itv (void) -{ - return ia64_getreg(_IA64_REG_CR_ITV); -} - -static __inline__ void -ia64_set_itc (unsigned long val) -{ - ia64_setreg(_IA64_REG_AR_ITC, val); - ia64_srlz_d(); -} - -static __inline__ unsigned long -ia64_get_itc (void) -{ - unsigned long result; - - result = ia64_getreg(_IA64_REG_AR_ITC); - ia64_barrier(); -#ifdef CONFIG_ITANIUM - while (unlikely((__s32) result == -1)) { - result = ia64_getreg(_IA64_REG_AR_ITC); - ia64_barrier(); - } -#endif - return result; -} - -extern void ia64_delay_loop (unsigned long loops); - -static __inline__ void -__delay (unsigned long loops) -{ - if (unlikely(loops < 1)) - return; - - ia64_delay_loop (loops - 1); -} - -extern void udelay (unsigned long usecs); - -#endif /* _ASM_IA64_DELAY_H */ diff --git a/include/asm-ia64/device.h b/include/asm-ia64/device.h deleted file mode 100644 index 3db6daf7f251..000000000000 --- a/include/asm-ia64/device.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#ifndef _ASM_IA64_DEVICE_H -#define _ASM_IA64_DEVICE_H - -struct dev_archdata { -#ifdef CONFIG_ACPI - void *acpi_handle; -#endif -}; - -#endif /* _ASM_IA64_DEVICE_H */ diff --git a/include/asm-ia64/div64.h b/include/asm-ia64/div64.h deleted file mode 100644 index 6cd978cefb28..000000000000 --- a/include/asm-ia64/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-ia64/dma-mapping.h b/include/asm-ia64/dma-mapping.h deleted file mode 100644 index 9f0df9bd46b7..000000000000 --- a/include/asm-ia64/dma-mapping.h +++ /dev/null @@ -1,97 +0,0 @@ -#ifndef _ASM_IA64_DMA_MAPPING_H -#define _ASM_IA64_DMA_MAPPING_H - -/* - * Copyright (C) 2003-2004 Hewlett-Packard Co - * David Mosberger-Tang - */ -#include -#include - -#define dma_alloc_coherent platform_dma_alloc_coherent -/* coherent mem. is cheap */ -static inline void * -dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - gfp_t flag) -{ - return dma_alloc_coherent(dev, size, dma_handle, flag); -} -#define dma_free_coherent platform_dma_free_coherent -static inline void -dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t dma_handle) -{ - dma_free_coherent(dev, size, cpu_addr, dma_handle); -} -#define dma_map_single_attrs platform_dma_map_single_attrs -static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, - size_t size, int dir) -{ - return dma_map_single_attrs(dev, cpu_addr, size, dir, NULL); -} -#define dma_map_sg_attrs platform_dma_map_sg_attrs -static inline int dma_map_sg(struct device *dev, struct scatterlist *sgl, - int nents, int dir) -{ - return dma_map_sg_attrs(dev, sgl, nents, dir, NULL); -} -#define dma_unmap_single_attrs platform_dma_unmap_single_attrs -static inline void dma_unmap_single(struct device *dev, dma_addr_t cpu_addr, - size_t size, int dir) -{ - return dma_unmap_single_attrs(dev, cpu_addr, size, dir, NULL); -} -#define dma_unmap_sg_attrs platform_dma_unmap_sg_attrs -static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sgl, - int nents, int dir) -{ - return dma_unmap_sg_attrs(dev, sgl, nents, dir, NULL); -} -#define dma_sync_single_for_cpu platform_dma_sync_single_for_cpu -#define dma_sync_sg_for_cpu platform_dma_sync_sg_for_cpu -#define dma_sync_single_for_device platform_dma_sync_single_for_device -#define dma_sync_sg_for_device platform_dma_sync_sg_for_device -#define dma_mapping_error platform_dma_mapping_error - -#define dma_map_page(dev, pg, off, size, dir) \ - dma_map_single(dev, page_address(pg) + (off), (size), (dir)) -#define dma_unmap_page(dev, dma_addr, size, dir) \ - dma_unmap_single(dev, dma_addr, size, dir) - -/* - * Rest of this file is part of the "Advanced DMA API". Use at your own risk. - * See Documentation/DMA-API.txt for details. - */ - -#define dma_sync_single_range_for_cpu(dev, dma_handle, offset, size, dir) \ - dma_sync_single_for_cpu(dev, dma_handle, size, dir) -#define dma_sync_single_range_for_device(dev, dma_handle, offset, size, dir) \ - dma_sync_single_for_device(dev, dma_handle, size, dir) - -#define dma_supported platform_dma_supported - -static inline int -dma_set_mask (struct device *dev, u64 mask) -{ - if (!dev->dma_mask || !dma_supported(dev, mask)) - return -EIO; - *dev->dma_mask = mask; - return 0; -} - -extern int dma_get_cache_alignment(void); - -static inline void -dma_cache_sync (struct device *dev, void *vaddr, size_t size, - enum dma_data_direction dir) -{ - /* - * IA-64 is cache-coherent, so this is mostly a no-op. However, we do need to - * ensure that dma_cache_sync() enforces order, hence the mb(). - */ - mb(); -} - -#define dma_is_consistent(d, h) (1) /* all we do is coherent memory... */ - -#endif /* _ASM_IA64_DMA_MAPPING_H */ diff --git a/include/asm-ia64/dma.h b/include/asm-ia64/dma.h deleted file mode 100644 index 4d97f60f1ef5..000000000000 --- a/include/asm-ia64/dma.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _ASM_IA64_DMA_H -#define _ASM_IA64_DMA_H - -/* - * Copyright (C) 1998-2002 Hewlett-Packard Co - * David Mosberger-Tang - */ - - -#include /* need byte IO */ - -extern unsigned long MAX_DMA_ADDRESS; - -#ifdef CONFIG_PCI - extern int isa_dma_bridge_buggy; -#else -# define isa_dma_bridge_buggy (0) -#endif - -#define free_dma(x) - -void dma_mark_clean(void *addr, size_t size); - -#endif /* _ASM_IA64_DMA_H */ diff --git a/include/asm-ia64/dmi.h b/include/asm-ia64/dmi.h deleted file mode 100644 index 00eb1b130b63..000000000000 --- a/include/asm-ia64/dmi.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _ASM_DMI_H -#define _ASM_DMI_H 1 - -#include - -/* Use normal IO mappings for DMI */ -#define dmi_ioremap ioremap -#define dmi_iounmap(x,l) iounmap(x) -#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC) - -#endif diff --git a/include/asm-ia64/elf.h b/include/asm-ia64/elf.h deleted file mode 100644 index 5e0c1a6bce8d..000000000000 --- a/include/asm-ia64/elf.h +++ /dev/null @@ -1,269 +0,0 @@ -#ifndef _ASM_IA64_ELF_H -#define _ASM_IA64_ELF_H - -/* - * ELF-specific definitions. - * - * Copyright (C) 1998-1999, 2002-2004 Hewlett-Packard Co - * David Mosberger-Tang - */ - - -#include -#include -#include - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ((x)->e_machine == EM_IA_64) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS64 -#define ELF_DATA ELFDATA2LSB -#define ELF_ARCH EM_IA_64 - -#define USE_ELF_CORE_DUMP -#define CORE_DUMP_USE_REGSET - -/* Least-significant four bits of ELF header's e_flags are OS-specific. The bits are - interpreted as follows by Linux: */ -#define EF_IA_64_LINUX_EXECUTABLE_STACK 0x1 /* is stack (& heap) executable by default? */ - -#define ELF_EXEC_PAGESIZE PAGE_SIZE - -/* - * This is the location that an ET_DYN program is loaded if exec'ed. - * Typical use of this is to invoke "./ld.so someprog" to test out a - * new version of the loader. We need to make sure that it is out of - * the way of the program that it will "exec", and that there is - * sufficient room for the brk. - */ -#define ELF_ET_DYN_BASE (TASK_UNMAPPED_BASE + 0x800000000UL) - -#define PT_IA_64_UNWIND 0x70000001 - -/* IA-64 relocations: */ -#define R_IA64_NONE 0x00 /* none */ -#define R_IA64_IMM14 0x21 /* symbol + addend, add imm14 */ -#define R_IA64_IMM22 0x22 /* symbol + addend, add imm22 */ -#define R_IA64_IMM64 0x23 /* symbol + addend, mov imm64 */ -#define R_IA64_DIR32MSB 0x24 /* symbol + addend, data4 MSB */ -#define R_IA64_DIR32LSB 0x25 /* symbol + addend, data4 LSB */ -#define R_IA64_DIR64MSB 0x26 /* symbol + addend, data8 MSB */ -#define R_IA64_DIR64LSB 0x27 /* symbol + addend, data8 LSB */ -#define R_IA64_GPREL22 0x2a /* @gprel(sym+add), add imm22 */ -#define R_IA64_GPREL64I 0x2b /* @gprel(sym+add), mov imm64 */ -#define R_IA64_GPREL32MSB 0x2c /* @gprel(sym+add), data4 MSB */ -#define R_IA64_GPREL32LSB 0x2d /* @gprel(sym+add), data4 LSB */ -#define R_IA64_GPREL64MSB 0x2e /* @gprel(sym+add), data8 MSB */ -#define R_IA64_GPREL64LSB 0x2f /* @gprel(sym+add), data8 LSB */ -#define R_IA64_LTOFF22 0x32 /* @ltoff(sym+add), add imm22 */ -#define R_IA64_LTOFF64I 0x33 /* @ltoff(sym+add), mov imm64 */ -#define R_IA64_PLTOFF22 0x3a /* @pltoff(sym+add), add imm22 */ -#define R_IA64_PLTOFF64I 0x3b /* @pltoff(sym+add), mov imm64 */ -#define R_IA64_PLTOFF64MSB 0x3e /* @pltoff(sym+add), data8 MSB */ -#define R_IA64_PLTOFF64LSB 0x3f /* @pltoff(sym+add), data8 LSB */ -#define R_IA64_FPTR64I 0x43 /* @fptr(sym+add), mov imm64 */ -#define R_IA64_FPTR32MSB 0x44 /* @fptr(sym+add), data4 MSB */ -#define R_IA64_FPTR32LSB 0x45 /* @fptr(sym+add), data4 LSB */ -#define R_IA64_FPTR64MSB 0x46 /* @fptr(sym+add), data8 MSB */ -#define R_IA64_FPTR64LSB 0x47 /* @fptr(sym+add), data8 LSB */ -#define R_IA64_PCREL60B 0x48 /* @pcrel(sym+add), brl */ -#define R_IA64_PCREL21B 0x49 /* @pcrel(sym+add), ptb, call */ -#define R_IA64_PCREL21M 0x4a /* @pcrel(sym+add), chk.s */ -#define R_IA64_PCREL21F 0x4b /* @pcrel(sym+add), fchkf */ -#define R_IA64_PCREL32MSB 0x4c /* @pcrel(sym+add), data4 MSB */ -#define R_IA64_PCREL32LSB 0x4d /* @pcrel(sym+add), data4 LSB */ -#define R_IA64_PCREL64MSB 0x4e /* @pcrel(sym+add), data8 MSB */ -#define R_IA64_PCREL64LSB 0x4f /* @pcrel(sym+add), data8 LSB */ -#define R_IA64_LTOFF_FPTR22 0x52 /* @ltoff(@fptr(s+a)), imm22 */ -#define R_IA64_LTOFF_FPTR64I 0x53 /* @ltoff(@fptr(s+a)), imm64 */ -#define R_IA64_LTOFF_FPTR32MSB 0x54 /* @ltoff(@fptr(s+a)), 4 MSB */ -#define R_IA64_LTOFF_FPTR32LSB 0x55 /* @ltoff(@fptr(s+a)), 4 LSB */ -#define R_IA64_LTOFF_FPTR64MSB 0x56 /* @ltoff(@fptr(s+a)), 8 MSB */ -#define R_IA64_LTOFF_FPTR64LSB 0x57 /* @ltoff(@fptr(s+a)), 8 LSB */ -#define R_IA64_SEGREL32MSB 0x5c /* @segrel(sym+add), data4 MSB */ -#define R_IA64_SEGREL32LSB 0x5d /* @segrel(sym+add), data4 LSB */ -#define R_IA64_SEGREL64MSB 0x5e /* @segrel(sym+add), data8 MSB */ -#define R_IA64_SEGREL64LSB 0x5f /* @segrel(sym+add), data8 LSB */ -#define R_IA64_SECREL32MSB 0x64 /* @secrel(sym+add), data4 MSB */ -#define R_IA64_SECREL32LSB 0x65 /* @secrel(sym+add), data4 LSB */ -#define R_IA64_SECREL64MSB 0x66 /* @secrel(sym+add), data8 MSB */ -#define R_IA64_SECREL64LSB 0x67 /* @secrel(sym+add), data8 LSB */ -#define R_IA64_REL32MSB 0x6c /* data 4 + REL */ -#define R_IA64_REL32LSB 0x6d /* data 4 + REL */ -#define R_IA64_REL64MSB 0x6e /* data 8 + REL */ -#define R_IA64_REL64LSB 0x6f /* data 8 + REL */ -#define R_IA64_LTV32MSB 0x74 /* symbol + addend, data4 MSB */ -#define R_IA64_LTV32LSB 0x75 /* symbol + addend, data4 LSB */ -#define R_IA64_LTV64MSB 0x76 /* symbol + addend, data8 MSB */ -#define R_IA64_LTV64LSB 0x77 /* symbol + addend, data8 LSB */ -#define R_IA64_PCREL21BI 0x79 /* @pcrel(sym+add), ptb, call */ -#define R_IA64_PCREL22 0x7a /* @pcrel(sym+add), imm22 */ -#define R_IA64_PCREL64I 0x7b /* @pcrel(sym+add), imm64 */ -#define R_IA64_IPLTMSB 0x80 /* dynamic reloc, imported PLT, MSB */ -#define R_IA64_IPLTLSB 0x81 /* dynamic reloc, imported PLT, LSB */ -#define R_IA64_COPY 0x84 /* dynamic reloc, data copy */ -#define R_IA64_SUB 0x85 /* -symbol + addend, add imm22 */ -#define R_IA64_LTOFF22X 0x86 /* LTOFF22, relaxable. */ -#define R_IA64_LDXMOV 0x87 /* Use of LTOFF22X. */ -#define R_IA64_TPREL14 0x91 /* @tprel(sym+add), add imm14 */ -#define R_IA64_TPREL22 0x92 /* @tprel(sym+add), add imm22 */ -#define R_IA64_TPREL64I 0x93 /* @tprel(sym+add), add imm64 */ -#define R_IA64_TPREL64MSB 0x96 /* @tprel(sym+add), data8 MSB */ -#define R_IA64_TPREL64LSB 0x97 /* @tprel(sym+add), data8 LSB */ -#define R_IA64_LTOFF_TPREL22 0x9a /* @ltoff(@tprel(s+a)), add imm22 */ -#define R_IA64_DTPMOD64MSB 0xa6 /* @dtpmod(sym+add), data8 MSB */ -#define R_IA64_DTPMOD64LSB 0xa7 /* @dtpmod(sym+add), data8 LSB */ -#define R_IA64_LTOFF_DTPMOD22 0xaa /* @ltoff(@dtpmod(s+a)), imm22 */ -#define R_IA64_DTPREL14 0xb1 /* @dtprel(sym+add), imm14 */ -#define R_IA64_DTPREL22 0xb2 /* @dtprel(sym+add), imm22 */ -#define R_IA64_DTPREL64I 0xb3 /* @dtprel(sym+add), imm64 */ -#define R_IA64_DTPREL32MSB 0xb4 /* @dtprel(sym+add), data4 MSB */ -#define R_IA64_DTPREL32LSB 0xb5 /* @dtprel(sym+add), data4 LSB */ -#define R_IA64_DTPREL64MSB 0xb6 /* @dtprel(sym+add), data8 MSB */ -#define R_IA64_DTPREL64LSB 0xb7 /* @dtprel(sym+add), data8 LSB */ -#define R_IA64_LTOFF_DTPREL22 0xba /* @ltoff(@dtprel(s+a)), imm22 */ - -/* IA-64 specific section flags: */ -#define SHF_IA_64_SHORT 0x10000000 /* section near gp */ - -/* - * We use (abuse?) this macro to insert the (empty) vm_area that is - * used to map the register backing store. I don't see any better - * place to do this, but we should discuss this with Linus once we can - * talk to him... - */ -extern void ia64_init_addr_space (void); -#define ELF_PLAT_INIT(_r, load_addr) ia64_init_addr_space() - -/* ELF register definitions. This is needed for core dump support. */ - -/* - * elf_gregset_t contains the application-level state in the following order: - * r0-r31 - * NaT bits (for r0-r31; bit N == 1 iff rN is a NaT) - * predicate registers (p0-p63) - * b0-b7 - * ip cfm psr - * ar.rsc ar.bsp ar.bspstore ar.rnat - * ar.ccv ar.unat ar.fpsr ar.pfs ar.lc ar.ec ar.csd ar.ssd - */ -#define ELF_NGREG 128 /* we really need just 72 but let's leave some headroom... */ -#define ELF_NFPREG 128 /* f0 and f1 could be omitted, but so what... */ - -/* elf_gregset_t register offsets */ -#define ELF_GR_0_OFFSET 0 -#define ELF_NAT_OFFSET (32 * sizeof(elf_greg_t)) -#define ELF_PR_OFFSET (33 * sizeof(elf_greg_t)) -#define ELF_BR_0_OFFSET (34 * sizeof(elf_greg_t)) -#define ELF_CR_IIP_OFFSET (42 * sizeof(elf_greg_t)) -#define ELF_CFM_OFFSET (43 * sizeof(elf_greg_t)) -#define ELF_CR_IPSR_OFFSET (44 * sizeof(elf_greg_t)) -#define ELF_GR_OFFSET(i) (ELF_GR_0_OFFSET + i * sizeof(elf_greg_t)) -#define ELF_BR_OFFSET(i) (ELF_BR_0_OFFSET + i * sizeof(elf_greg_t)) -#define ELF_AR_RSC_OFFSET (45 * sizeof(elf_greg_t)) -#define ELF_AR_BSP_OFFSET (46 * sizeof(elf_greg_t)) -#define ELF_AR_BSPSTORE_OFFSET (47 * sizeof(elf_greg_t)) -#define ELF_AR_RNAT_OFFSET (48 * sizeof(elf_greg_t)) -#define ELF_AR_CCV_OFFSET (49 * sizeof(elf_greg_t)) -#define ELF_AR_UNAT_OFFSET (50 * sizeof(elf_greg_t)) -#define ELF_AR_FPSR_OFFSET (51 * sizeof(elf_greg_t)) -#define ELF_AR_PFS_OFFSET (52 * sizeof(elf_greg_t)) -#define ELF_AR_LC_OFFSET (53 * sizeof(elf_greg_t)) -#define ELF_AR_EC_OFFSET (54 * sizeof(elf_greg_t)) -#define ELF_AR_CSD_OFFSET (55 * sizeof(elf_greg_t)) -#define ELF_AR_SSD_OFFSET (56 * sizeof(elf_greg_t)) -#define ELF_AR_END_OFFSET (57 * sizeof(elf_greg_t)) - -typedef unsigned long elf_fpxregset_t; - -typedef unsigned long elf_greg_t; -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct ia64_fpreg elf_fpreg_t; -typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; - - - -struct pt_regs; /* forward declaration... */ -extern void ia64_elf_core_copy_regs (struct pt_regs *src, elf_gregset_t dst); -#define ELF_CORE_COPY_REGS(_dest,_regs) ia64_elf_core_copy_regs(_regs, _dest); - -/* This macro yields a bitmask that programs can use to figure out - what instruction set this CPU supports. */ -#define ELF_HWCAP 0 - -/* This macro yields a string that ld.so will use to load - implementation specific libraries for optimization. Not terribly - relevant until we have real hardware to play with... */ -#define ELF_PLATFORM NULL - -#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX) -#define elf_read_implies_exec(ex, executable_stack) \ - ((executable_stack!=EXSTACK_DISABLE_X) && ((ex).e_flags & EF_IA_64_LINUX_EXECUTABLE_STACK) != 0) - -struct task_struct; - -#define GATE_EHDR ((const struct elfhdr *) GATE_ADDR) - -/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */ -#define ARCH_DLINFO \ -do { \ - extern char __kernel_syscall_via_epc[]; \ - NEW_AUX_ENT(AT_SYSINFO, (unsigned long) __kernel_syscall_via_epc); \ - NEW_AUX_ENT(AT_SYSINFO_EHDR, (unsigned long) GATE_EHDR); \ -} while (0) - - -/* - * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out - * extra segments containing the gate DSO contents. Dumping its - * contents makes post-mortem fully interpretable later without matching up - * the same kernel and hardware config to see what PC values meant. - * Dumping its extra ELF program headers includes all the other information - * a debugger needs to easily find how the gate DSO was being used. - */ -#define ELF_CORE_EXTRA_PHDRS (GATE_EHDR->e_phnum) -#define ELF_CORE_WRITE_EXTRA_PHDRS \ -do { \ - const struct elf_phdr *const gate_phdrs = \ - (const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff); \ - int i; \ - Elf64_Off ofs = 0; \ - for (i = 0; i < GATE_EHDR->e_phnum; ++i) { \ - struct elf_phdr phdr = gate_phdrs[i]; \ - if (phdr.p_type == PT_LOAD) { \ - phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz); \ - phdr.p_filesz = phdr.p_memsz; \ - if (ofs == 0) { \ - ofs = phdr.p_offset = offset; \ - offset += phdr.p_filesz; \ - } \ - else \ - phdr.p_offset = ofs; \ - } \ - else \ - phdr.p_offset += ofs; \ - phdr.p_paddr = 0; /* match other core phdrs */ \ - DUMP_WRITE(&phdr, sizeof(phdr)); \ - } \ -} while (0) -#define ELF_CORE_WRITE_EXTRA_DATA \ -do { \ - const struct elf_phdr *const gate_phdrs = \ - (const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff); \ - int i; \ - for (i = 0; i < GATE_EHDR->e_phnum; ++i) { \ - if (gate_phdrs[i].p_type == PT_LOAD) { \ - DUMP_WRITE((void *) gate_phdrs[i].p_vaddr, \ - PAGE_ALIGN(gate_phdrs[i].p_memsz)); \ - break; \ - } \ - } \ -} while (0) - -#endif /* _ASM_IA64_ELF_H */ diff --git a/include/asm-ia64/emergency-restart.h b/include/asm-ia64/emergency-restart.h deleted file mode 100644 index 108d8c48e42e..000000000000 --- a/include/asm-ia64/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-ia64/errno.h b/include/asm-ia64/errno.h deleted file mode 100644 index 4c82b503d92f..000000000000 --- a/include/asm-ia64/errno.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-ia64/esi.h b/include/asm-ia64/esi.h deleted file mode 100644 index 40991c6ba647..000000000000 --- a/include/asm-ia64/esi.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * ESI service calls. - * - * Copyright (c) Copyright 2005-2006 Hewlett-Packard Development Company, L.P. - * Alex Williamson - */ -#ifndef esi_h -#define esi_h - -#include - -#define ESI_QUERY 0x00000001 -#define ESI_OPEN_HANDLE 0x02000000 -#define ESI_CLOSE_HANDLE 0x02000001 - -enum esi_proc_type { - ESI_PROC_SERIALIZED, /* calls need to be serialized */ - ESI_PROC_MP_SAFE, /* MP-safe, but not reentrant */ - ESI_PROC_REENTRANT /* MP-safe and reentrant */ -}; - -extern struct ia64_sal_retval esi_call_phys (void *, u64 *); -extern int ia64_esi_call(efi_guid_t, struct ia64_sal_retval *, - enum esi_proc_type, - u64, u64, u64, u64, u64, u64, u64, u64); -extern int ia64_esi_call_phys(efi_guid_t, struct ia64_sal_retval *, u64, u64, - u64, u64, u64, u64, u64, u64); - -#endif /* esi_h */ diff --git a/include/asm-ia64/fb.h b/include/asm-ia64/fb.h deleted file mode 100644 index 89a397cee90a..000000000000 --- a/include/asm-ia64/fb.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ - -#include -#include -#include -#include - -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - if (efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start)) - vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); - else - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); -} - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-ia64/fcntl.h b/include/asm-ia64/fcntl.h deleted file mode 100644 index 1dd275dc8f65..000000000000 --- a/include/asm-ia64/fcntl.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_IA64_FCNTL_H -#define _ASM_IA64_FCNTL_H -/* - * Modified 1998-2000 - * David Mosberger-Tang , Hewlett-Packard Co. - */ - -#define force_o_largefile() \ - (personality(current->personality) != PER_LINUX32) - -#include - -#endif /* _ASM_IA64_FCNTL_H */ diff --git a/include/asm-ia64/fpswa.h b/include/asm-ia64/fpswa.h deleted file mode 100644 index 62edfceadaa6..000000000000 --- a/include/asm-ia64/fpswa.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef _ASM_IA64_FPSWA_H -#define _ASM_IA64_FPSWA_H - -/* - * Floating-point Software Assist - * - * Copyright (C) 1999 Intel Corporation. - * Copyright (C) 1999 Asit Mallick - * Copyright (C) 1999 Goutham Rao - */ - -typedef struct { - /* 4 * 128 bits */ - unsigned long fp_lp[4*2]; -} fp_state_low_preserved_t; - -typedef struct { - /* 10 * 128 bits */ - unsigned long fp_lv[10 * 2]; -} fp_state_low_volatile_t; - -typedef struct { - /* 16 * 128 bits */ - unsigned long fp_hp[16 * 2]; -} fp_state_high_preserved_t; - -typedef struct { - /* 96 * 128 bits */ - unsigned long fp_hv[96 * 2]; -} fp_state_high_volatile_t; - -/** - * floating point state to be passed to the FP emulation library by - * the trap/fault handler - */ -typedef struct { - unsigned long bitmask_low64; - unsigned long bitmask_high64; - fp_state_low_preserved_t *fp_state_low_preserved; - fp_state_low_volatile_t *fp_state_low_volatile; - fp_state_high_preserved_t *fp_state_high_preserved; - fp_state_high_volatile_t *fp_state_high_volatile; -} fp_state_t; - -typedef struct { - unsigned long status; - unsigned long err0; - unsigned long err1; - unsigned long err2; -} fpswa_ret_t; - -/** - * function header for the Floating Point software assist - * library. This function is invoked by the Floating point software - * assist trap/fault handler. - */ -typedef fpswa_ret_t (*efi_fpswa_t) (unsigned long trap_type, void *bundle, unsigned long *ipsr, - unsigned long *fsr, unsigned long *isr, unsigned long *preds, - unsigned long *ifs, fp_state_t *fp_state); - -/** - * This is the FPSWA library interface as defined by EFI. We need to pass a - * pointer to the interface itself on a call to the assist library - */ -typedef struct { - unsigned int revision; - unsigned int reserved; - efi_fpswa_t fpswa; -} fpswa_interface_t; - -extern fpswa_interface_t *fpswa_interface; - -#endif /* _ASM_IA64_FPSWA_H */ diff --git a/include/asm-ia64/fpu.h b/include/asm-ia64/fpu.h deleted file mode 100644 index 3859558ff0a4..000000000000 --- a/include/asm-ia64/fpu.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef _ASM_IA64_FPU_H -#define _ASM_IA64_FPU_H - -/* - * Copyright (C) 1998, 1999, 2002, 2003 Hewlett-Packard Co - * David Mosberger-Tang - */ - -#include - -/* floating point status register: */ -#define FPSR_TRAP_VD (1 << 0) /* invalid op trap disabled */ -#define FPSR_TRAP_DD (1 << 1) /* denormal trap disabled */ -#define FPSR_TRAP_ZD (1 << 2) /* zero-divide trap disabled */ -#define FPSR_TRAP_OD (1 << 3) /* overflow trap disabled */ -#define FPSR_TRAP_UD (1 << 4) /* underflow trap disabled */ -#define FPSR_TRAP_ID (1 << 5) /* inexact trap disabled */ -#define FPSR_S0(x) ((x) << 6) -#define FPSR_S1(x) ((x) << 19) -#define FPSR_S2(x) (__IA64_UL(x) << 32) -#define FPSR_S3(x) (__IA64_UL(x) << 45) - -/* floating-point status field controls: */ -#define FPSF_FTZ (1 << 0) /* flush-to-zero */ -#define FPSF_WRE (1 << 1) /* widest-range exponent */ -#define FPSF_PC(x) (((x) & 0x3) << 2) /* precision control */ -#define FPSF_RC(x) (((x) & 0x3) << 4) /* rounding control */ -#define FPSF_TD (1 << 6) /* trap disabled */ - -/* floating-point status field flags: */ -#define FPSF_V (1 << 7) /* invalid operation flag */ -#define FPSF_D (1 << 8) /* denormal/unnormal operand flag */ -#define FPSF_Z (1 << 9) /* zero divide (IEEE) flag */ -#define FPSF_O (1 << 10) /* overflow (IEEE) flag */ -#define FPSF_U (1 << 11) /* underflow (IEEE) flag */ -#define FPSF_I (1 << 12) /* inexact (IEEE) flag) */ - -/* floating-point rounding control: */ -#define FPRC_NEAREST 0x0 -#define FPRC_NEGINF 0x1 -#define FPRC_POSINF 0x2 -#define FPRC_TRUNC 0x3 - -#define FPSF_DEFAULT (FPSF_PC (0x3) | FPSF_RC (FPRC_NEAREST)) - -/* This default value is the same as HP-UX uses. Don't change it - without a very good reason. */ -#define FPSR_DEFAULT (FPSR_TRAP_VD | FPSR_TRAP_DD | FPSR_TRAP_ZD \ - | FPSR_TRAP_OD | FPSR_TRAP_UD | FPSR_TRAP_ID \ - | FPSR_S0 (FPSF_DEFAULT) \ - | FPSR_S1 (FPSF_DEFAULT | FPSF_TD | FPSF_WRE) \ - | FPSR_S2 (FPSF_DEFAULT | FPSF_TD) \ - | FPSR_S3 (FPSF_DEFAULT | FPSF_TD)) - -# ifndef __ASSEMBLY__ - -struct ia64_fpreg { - union { - unsigned long bits[2]; - long double __dummy; /* force 16-byte alignment */ - } u; -}; - -# endif /* __ASSEMBLY__ */ - -#endif /* _ASM_IA64_FPU_H */ diff --git a/include/asm-ia64/futex.h b/include/asm-ia64/futex.h deleted file mode 100644 index c7f0f062239c..000000000000 --- a/include/asm-ia64/futex.h +++ /dev/null @@ -1,124 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include -#include -#include -#include - -#define __futex_atomic_op1(insn, ret, oldval, uaddr, oparg) \ -do { \ - register unsigned long r8 __asm ("r8") = 0; \ - __asm__ __volatile__( \ - " mf;; \n" \ - "[1:] " insn ";; \n" \ - " .xdata4 \"__ex_table\", 1b-., 2f-. \n" \ - "[2:]" \ - : "+r" (r8), "=r" (oldval) \ - : "r" (uaddr), "r" (oparg) \ - : "memory"); \ - ret = r8; \ -} while (0) - -#define __futex_atomic_op2(insn, ret, oldval, uaddr, oparg) \ -do { \ - register unsigned long r8 __asm ("r8") = 0; \ - int val, newval; \ - do { \ - __asm__ __volatile__( \ - " mf;; \n" \ - "[1:] ld4 %3=[%4];; \n" \ - " mov %2=%3 \n" \ - insn ";; \n" \ - " mov ar.ccv=%2;; \n" \ - "[2:] cmpxchg4.acq %1=[%4],%3,ar.ccv;; \n" \ - " .xdata4 \"__ex_table\", 1b-., 3f-.\n" \ - " .xdata4 \"__ex_table\", 2b-., 3f-.\n" \ - "[3:]" \ - : "+r" (r8), "=r" (val), "=&r" (oldval), \ - "=&r" (newval) \ - : "r" (uaddr), "r" (oparg) \ - : "memory"); \ - if (unlikely (r8)) \ - break; \ - } while (unlikely (val != oldval)); \ - ret = r8; \ -} while (0) - -static inline int -futex_atomic_op_inuser (int encoded_op, int __user *uaddr) -{ - int op = (encoded_op >> 28) & 7; - int cmp = (encoded_op >> 24) & 15; - int oparg = (encoded_op << 8) >> 20; - int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; - if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) - oparg = 1 << oparg; - - if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - pagefault_disable(); - - switch (op) { - case FUTEX_OP_SET: - __futex_atomic_op1("xchg4 %1=[%2],%3", ret, oldval, uaddr, - oparg); - break; - case FUTEX_OP_ADD: - __futex_atomic_op2("add %3=%3,%5", ret, oldval, uaddr, oparg); - break; - case FUTEX_OP_OR: - __futex_atomic_op2("or %3=%3,%5", ret, oldval, uaddr, oparg); - break; - case FUTEX_OP_ANDN: - __futex_atomic_op2("and %3=%3,%5", ret, oldval, uaddr, - ~oparg); - break; - case FUTEX_OP_XOR: - __futex_atomic_op2("xor %3=%3,%5", ret, oldval, uaddr, oparg); - break; - default: - ret = -ENOSYS; - } - - pagefault_enable(); - - if (!ret) { - switch (cmp) { - case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; - case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; - case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; - case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; - case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; - case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; - default: ret = -ENOSYS; - } - } - return ret; -} - -static inline int -futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) -{ - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - { - register unsigned long r8 __asm ("r8"); - __asm__ __volatile__( - " mf;; \n" - " mov ar.ccv=%3;; \n" - "[1:] cmpxchg4.acq %0=[%1],%2,ar.ccv \n" - " .xdata4 \"__ex_table\", 1b-., 2f-. \n" - "[2:]" - : "=r" (r8) - : "r" (uaddr), "r" (newval), - "rO" ((long) (unsigned) oldval) - : "memory"); - return r8; - } -} - -#endif /* _ASM_FUTEX_H */ diff --git a/include/asm-ia64/gcc_intrin.h b/include/asm-ia64/gcc_intrin.h deleted file mode 100644 index 0f5b55921758..000000000000 --- a/include/asm-ia64/gcc_intrin.h +++ /dev/null @@ -1,620 +0,0 @@ -#ifndef _ASM_IA64_GCC_INTRIN_H -#define _ASM_IA64_GCC_INTRIN_H -/* - * - * Copyright (C) 2002,2003 Jun Nakajima - * Copyright (C) 2002,2003 Suresh Siddha - */ - -#include - -/* define this macro to get some asm stmts included in 'c' files */ -#define ASM_SUPPORTED - -/* Optimization barrier */ -/* The "volatile" is due to gcc bugs */ -#define ia64_barrier() asm volatile ("":::"memory") - -#define ia64_stop() asm volatile (";;"::) - -#define ia64_invala_gr(regnum) asm volatile ("invala.e r%0" :: "i"(regnum)) - -#define ia64_invala_fr(regnum) asm volatile ("invala.e f%0" :: "i"(regnum)) - -#define ia64_flushrs() asm volatile ("flushrs;;":::"memory") - -#define ia64_loadrs() asm volatile ("loadrs;;":::"memory") - -extern void ia64_bad_param_for_setreg (void); -extern void ia64_bad_param_for_getreg (void); - -#ifdef __KERNEL__ -register unsigned long ia64_r13 asm ("r13") __used; -#endif - -#define ia64_native_setreg(regnum, val) \ -({ \ - switch (regnum) { \ - case _IA64_REG_PSR_L: \ - asm volatile ("mov psr.l=%0" :: "r"(val) : "memory"); \ - break; \ - case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC: \ - asm volatile ("mov ar%0=%1" :: \ - "i" (regnum - _IA64_REG_AR_KR0), \ - "r"(val): "memory"); \ - break; \ - case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1: \ - asm volatile ("mov cr%0=%1" :: \ - "i" (regnum - _IA64_REG_CR_DCR), \ - "r"(val): "memory" ); \ - break; \ - case _IA64_REG_SP: \ - asm volatile ("mov r12=%0" :: \ - "r"(val): "memory"); \ - break; \ - case _IA64_REG_GP: \ - asm volatile ("mov gp=%0" :: "r"(val) : "memory"); \ - break; \ - default: \ - ia64_bad_param_for_setreg(); \ - break; \ - } \ -}) - -#define ia64_native_getreg(regnum) \ -({ \ - __u64 ia64_intri_res; \ - \ - switch (regnum) { \ - case _IA64_REG_GP: \ - asm volatile ("mov %0=gp" : "=r"(ia64_intri_res)); \ - break; \ - case _IA64_REG_IP: \ - asm volatile ("mov %0=ip" : "=r"(ia64_intri_res)); \ - break; \ - case _IA64_REG_PSR: \ - asm volatile ("mov %0=psr" : "=r"(ia64_intri_res)); \ - break; \ - case _IA64_REG_TP: /* for current() */ \ - ia64_intri_res = ia64_r13; \ - break; \ - case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC: \ - asm volatile ("mov %0=ar%1" : "=r" (ia64_intri_res) \ - : "i"(regnum - _IA64_REG_AR_KR0)); \ - break; \ - case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1: \ - asm volatile ("mov %0=cr%1" : "=r" (ia64_intri_res) \ - : "i" (regnum - _IA64_REG_CR_DCR)); \ - break; \ - case _IA64_REG_SP: \ - asm volatile ("mov %0=sp" : "=r" (ia64_intri_res)); \ - break; \ - default: \ - ia64_bad_param_for_getreg(); \ - break; \ - } \ - ia64_intri_res; \ -}) - -#define ia64_hint_pause 0 - -#define ia64_hint(mode) \ -({ \ - switch (mode) { \ - case ia64_hint_pause: \ - asm volatile ("hint @pause" ::: "memory"); \ - break; \ - } \ -}) - - -/* Integer values for mux1 instruction */ -#define ia64_mux1_brcst 0 -#define ia64_mux1_mix 8 -#define ia64_mux1_shuf 9 -#define ia64_mux1_alt 10 -#define ia64_mux1_rev 11 - -#define ia64_mux1(x, mode) \ -({ \ - __u64 ia64_intri_res; \ - \ - switch (mode) { \ - case ia64_mux1_brcst: \ - asm ("mux1 %0=%1,@brcst" : "=r" (ia64_intri_res) : "r" (x)); \ - break; \ - case ia64_mux1_mix: \ - asm ("mux1 %0=%1,@mix" : "=r" (ia64_intri_res) : "r" (x)); \ - break; \ - case ia64_mux1_shuf: \ - asm ("mux1 %0=%1,@shuf" : "=r" (ia64_intri_res) : "r" (x)); \ - break; \ - case ia64_mux1_alt: \ - asm ("mux1 %0=%1,@alt" : "=r" (ia64_intri_res) : "r" (x)); \ - break; \ - case ia64_mux1_rev: \ - asm ("mux1 %0=%1,@rev" : "=r" (ia64_intri_res) : "r" (x)); \ - break; \ - } \ - ia64_intri_res; \ -}) - -#if __GNUC__ >= 4 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) -# define ia64_popcnt(x) __builtin_popcountl(x) -#else -# define ia64_popcnt(x) \ - ({ \ - __u64 ia64_intri_res; \ - asm ("popcnt %0=%1" : "=r" (ia64_intri_res) : "r" (x)); \ - \ - ia64_intri_res; \ - }) -#endif - -#define ia64_getf_exp(x) \ -({ \ - long ia64_intri_res; \ - \ - asm ("getf.exp %0=%1" : "=r"(ia64_intri_res) : "f"(x)); \ - \ - ia64_intri_res; \ -}) - -#define ia64_shrp(a, b, count) \ -({ \ - __u64 ia64_intri_res; \ - asm ("shrp %0=%1,%2,%3" : "=r"(ia64_intri_res) : "r"(a), "r"(b), "i"(count)); \ - ia64_intri_res; \ -}) - -#define ia64_ldfs(regnum, x) \ -({ \ - register double __f__ asm ("f"#regnum); \ - asm volatile ("ldfs %0=[%1]" :"=f"(__f__): "r"(x)); \ -}) - -#define ia64_ldfd(regnum, x) \ -({ \ - register double __f__ asm ("f"#regnum); \ - asm volatile ("ldfd %0=[%1]" :"=f"(__f__): "r"(x)); \ -}) - -#define ia64_ldfe(regnum, x) \ -({ \ - register double __f__ asm ("f"#regnum); \ - asm volatile ("ldfe %0=[%1]" :"=f"(__f__): "r"(x)); \ -}) - -#define ia64_ldf8(regnum, x) \ -({ \ - register double __f__ asm ("f"#regnum); \ - asm volatile ("ldf8 %0=[%1]" :"=f"(__f__): "r"(x)); \ -}) - -#define ia64_ldf_fill(regnum, x) \ -({ \ - register double __f__ asm ("f"#regnum); \ - asm volatile ("ldf.fill %0=[%1]" :"=f"(__f__): "r"(x)); \ -}) - -#define ia64_st4_rel_nta(m, val) \ -({ \ - asm volatile ("st4.rel.nta [%0] = %1\n\t" :: "r"(m), "r"(val)); \ -}) - -#define ia64_stfs(x, regnum) \ -({ \ - register double __f__ asm ("f"#regnum); \ - asm volatile ("stfs [%0]=%1" :: "r"(x), "f"(__f__) : "memory"); \ -}) - -#define ia64_stfd(x, regnum) \ -({ \ - register double __f__ asm ("f"#regnum); \ - asm volatile ("stfd [%0]=%1" :: "r"(x), "f"(__f__) : "memory"); \ -}) - -#define ia64_stfe(x, regnum) \ -({ \ - register double __f__ asm ("f"#regnum); \ - asm volatile ("stfe [%0]=%1" :: "r"(x), "f"(__f__) : "memory"); \ -}) - -#define ia64_stf8(x, regnum) \ -({ \ - register double __f__ asm ("f"#regnum); \ - asm volatile ("stf8 [%0]=%1" :: "r"(x), "f"(__f__) : "memory"); \ -}) - -#define ia64_stf_spill(x, regnum) \ -({ \ - register double __f__ asm ("f"#regnum); \ - asm volatile ("stf.spill [%0]=%1" :: "r"(x), "f"(__f__) : "memory"); \ -}) - -#define ia64_fetchadd4_acq(p, inc) \ -({ \ - \ - __u64 ia64_intri_res; \ - asm volatile ("fetchadd4.acq %0=[%1],%2" \ - : "=r"(ia64_intri_res) : "r"(p), "i" (inc) \ - : "memory"); \ - \ - ia64_intri_res; \ -}) - -#define ia64_fetchadd4_rel(p, inc) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("fetchadd4.rel %0=[%1],%2" \ - : "=r"(ia64_intri_res) : "r"(p), "i" (inc) \ - : "memory"); \ - \ - ia64_intri_res; \ -}) - -#define ia64_fetchadd8_acq(p, inc) \ -({ \ - \ - __u64 ia64_intri_res; \ - asm volatile ("fetchadd8.acq %0=[%1],%2" \ - : "=r"(ia64_intri_res) : "r"(p), "i" (inc) \ - : "memory"); \ - \ - ia64_intri_res; \ -}) - -#define ia64_fetchadd8_rel(p, inc) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("fetchadd8.rel %0=[%1],%2" \ - : "=r"(ia64_intri_res) : "r"(p), "i" (inc) \ - : "memory"); \ - \ - ia64_intri_res; \ -}) - -#define ia64_xchg1(ptr,x) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("xchg1 %0=[%1],%2" \ - : "=r" (ia64_intri_res) : "r" (ptr), "r" (x) : "memory"); \ - ia64_intri_res; \ -}) - -#define ia64_xchg2(ptr,x) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("xchg2 %0=[%1],%2" : "=r" (ia64_intri_res) \ - : "r" (ptr), "r" (x) : "memory"); \ - ia64_intri_res; \ -}) - -#define ia64_xchg4(ptr,x) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("xchg4 %0=[%1],%2" : "=r" (ia64_intri_res) \ - : "r" (ptr), "r" (x) : "memory"); \ - ia64_intri_res; \ -}) - -#define ia64_xchg8(ptr,x) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("xchg8 %0=[%1],%2" : "=r" (ia64_intri_res) \ - : "r" (ptr), "r" (x) : "memory"); \ - ia64_intri_res; \ -}) - -#define ia64_cmpxchg1_acq(ptr, new, old) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ - asm volatile ("cmpxchg1.acq %0=[%1],%2,ar.ccv": \ - "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ - ia64_intri_res; \ -}) - -#define ia64_cmpxchg1_rel(ptr, new, old) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ - asm volatile ("cmpxchg1.rel %0=[%1],%2,ar.ccv": \ - "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ - ia64_intri_res; \ -}) - -#define ia64_cmpxchg2_acq(ptr, new, old) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ - asm volatile ("cmpxchg2.acq %0=[%1],%2,ar.ccv": \ - "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ - ia64_intri_res; \ -}) - -#define ia64_cmpxchg2_rel(ptr, new, old) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ - \ - asm volatile ("cmpxchg2.rel %0=[%1],%2,ar.ccv": \ - "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ - ia64_intri_res; \ -}) - -#define ia64_cmpxchg4_acq(ptr, new, old) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ - asm volatile ("cmpxchg4.acq %0=[%1],%2,ar.ccv": \ - "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ - ia64_intri_res; \ -}) - -#define ia64_cmpxchg4_rel(ptr, new, old) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ - asm volatile ("cmpxchg4.rel %0=[%1],%2,ar.ccv": \ - "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ - ia64_intri_res; \ -}) - -#define ia64_cmpxchg8_acq(ptr, new, old) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ - asm volatile ("cmpxchg8.acq %0=[%1],%2,ar.ccv": \ - "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ - ia64_intri_res; \ -}) - -#define ia64_cmpxchg8_rel(ptr, new, old) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("mov ar.ccv=%0;;" :: "rO"(old)); \ - \ - asm volatile ("cmpxchg8.rel %0=[%1],%2,ar.ccv": \ - "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory"); \ - ia64_intri_res; \ -}) - -#define ia64_mf() asm volatile ("mf" ::: "memory") -#define ia64_mfa() asm volatile ("mf.a" ::: "memory") - -#define ia64_invala() asm volatile ("invala" ::: "memory") - -#define ia64_native_thash(addr) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("thash %0=%1" : "=r"(ia64_intri_res) : "r" (addr)); \ - ia64_intri_res; \ -}) - -#define ia64_srlz_i() asm volatile (";; srlz.i ;;" ::: "memory") -#define ia64_srlz_d() asm volatile (";; srlz.d" ::: "memory"); - -#ifdef HAVE_SERIALIZE_DIRECTIVE -# define ia64_dv_serialize_data() asm volatile (".serialize.data"); -# define ia64_dv_serialize_instruction() asm volatile (".serialize.instruction"); -#else -# define ia64_dv_serialize_data() -# define ia64_dv_serialize_instruction() -#endif - -#define ia64_nop(x) asm volatile ("nop %0"::"i"(x)); - -#define ia64_itci(addr) asm volatile ("itc.i %0;;" :: "r"(addr) : "memory") - -#define ia64_itcd(addr) asm volatile ("itc.d %0;;" :: "r"(addr) : "memory") - - -#define ia64_itri(trnum, addr) asm volatile ("itr.i itr[%0]=%1" \ - :: "r"(trnum), "r"(addr) : "memory") - -#define ia64_itrd(trnum, addr) asm volatile ("itr.d dtr[%0]=%1" \ - :: "r"(trnum), "r"(addr) : "memory") - -#define ia64_tpa(addr) \ -({ \ - __u64 ia64_pa; \ - asm volatile ("tpa %0 = %1" : "=r"(ia64_pa) : "r"(addr) : "memory"); \ - ia64_pa; \ -}) - -#define __ia64_set_dbr(index, val) \ - asm volatile ("mov dbr[%0]=%1" :: "r"(index), "r"(val) : "memory") - -#define ia64_set_ibr(index, val) \ - asm volatile ("mov ibr[%0]=%1" :: "r"(index), "r"(val) : "memory") - -#define ia64_set_pkr(index, val) \ - asm volatile ("mov pkr[%0]=%1" :: "r"(index), "r"(val) : "memory") - -#define ia64_set_pmc(index, val) \ - asm volatile ("mov pmc[%0]=%1" :: "r"(index), "r"(val) : "memory") - -#define ia64_set_pmd(index, val) \ - asm volatile ("mov pmd[%0]=%1" :: "r"(index), "r"(val) : "memory") - -#define ia64_native_set_rr(index, val) \ - asm volatile ("mov rr[%0]=%1" :: "r"(index), "r"(val) : "memory"); - -#define ia64_native_get_cpuid(index) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("mov %0=cpuid[%r1]" : "=r"(ia64_intri_res) : "rO"(index)); \ - ia64_intri_res; \ -}) - -#define __ia64_get_dbr(index) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("mov %0=dbr[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ - ia64_intri_res; \ -}) - -#define ia64_get_ibr(index) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("mov %0=ibr[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ - ia64_intri_res; \ -}) - -#define ia64_get_pkr(index) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("mov %0=pkr[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ - ia64_intri_res; \ -}) - -#define ia64_get_pmc(index) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("mov %0=pmc[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ - ia64_intri_res; \ -}) - - -#define ia64_native_get_pmd(index) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("mov %0=pmd[%1]" : "=r"(ia64_intri_res) : "r"(index)); \ - ia64_intri_res; \ -}) - -#define ia64_native_get_rr(index) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("mov %0=rr[%1]" : "=r"(ia64_intri_res) : "r" (index)); \ - ia64_intri_res; \ -}) - -#define ia64_native_fc(addr) asm volatile ("fc %0" :: "r"(addr) : "memory") - - -#define ia64_sync_i() asm volatile (";; sync.i" ::: "memory") - -#define ia64_native_ssm(mask) asm volatile ("ssm %0":: "i"((mask)) : "memory") -#define ia64_native_rsm(mask) asm volatile ("rsm %0":: "i"((mask)) : "memory") -#define ia64_sum(mask) asm volatile ("sum %0":: "i"((mask)) : "memory") -#define ia64_rum(mask) asm volatile ("rum %0":: "i"((mask)) : "memory") - -#define ia64_ptce(addr) asm volatile ("ptc.e %0" :: "r"(addr)) - -#define ia64_native_ptcga(addr, size) \ -do { \ - asm volatile ("ptc.ga %0,%1" :: "r"(addr), "r"(size) : "memory"); \ - ia64_dv_serialize_data(); \ -} while (0) - -#define ia64_ptcl(addr, size) \ -do { \ - asm volatile ("ptc.l %0,%1" :: "r"(addr), "r"(size) : "memory"); \ - ia64_dv_serialize_data(); \ -} while (0) - -#define ia64_ptri(addr, size) \ - asm volatile ("ptr.i %0,%1" :: "r"(addr), "r"(size) : "memory") - -#define ia64_ptrd(addr, size) \ - asm volatile ("ptr.d %0,%1" :: "r"(addr), "r"(size) : "memory") - -#define ia64_ttag(addr) \ -({ \ - __u64 ia64_intri_res; \ - asm volatile ("ttag %0=%1" : "=r"(ia64_intri_res) : "r" (addr)); \ - ia64_intri_res; \ -}) - - -/* Values for lfhint in ia64_lfetch and ia64_lfetch_fault */ - -#define ia64_lfhint_none 0 -#define ia64_lfhint_nt1 1 -#define ia64_lfhint_nt2 2 -#define ia64_lfhint_nta 3 - -#define ia64_lfetch(lfhint, y) \ -({ \ - switch (lfhint) { \ - case ia64_lfhint_none: \ - asm volatile ("lfetch [%0]" : : "r"(y)); \ - break; \ - case ia64_lfhint_nt1: \ - asm volatile ("lfetch.nt1 [%0]" : : "r"(y)); \ - break; \ - case ia64_lfhint_nt2: \ - asm volatile ("lfetch.nt2 [%0]" : : "r"(y)); \ - break; \ - case ia64_lfhint_nta: \ - asm volatile ("lfetch.nta [%0]" : : "r"(y)); \ - break; \ - } \ -}) - -#define ia64_lfetch_excl(lfhint, y) \ -({ \ - switch (lfhint) { \ - case ia64_lfhint_none: \ - asm volatile ("lfetch.excl [%0]" :: "r"(y)); \ - break; \ - case ia64_lfhint_nt1: \ - asm volatile ("lfetch.excl.nt1 [%0]" :: "r"(y)); \ - break; \ - case ia64_lfhint_nt2: \ - asm volatile ("lfetch.excl.nt2 [%0]" :: "r"(y)); \ - break; \ - case ia64_lfhint_nta: \ - asm volatile ("lfetch.excl.nta [%0]" :: "r"(y)); \ - break; \ - } \ -}) - -#define ia64_lfetch_fault(lfhint, y) \ -({ \ - switch (lfhint) { \ - case ia64_lfhint_none: \ - asm volatile ("lfetch.fault [%0]" : : "r"(y)); \ - break; \ - case ia64_lfhint_nt1: \ - asm volatile ("lfetch.fault.nt1 [%0]" : : "r"(y)); \ - break; \ - case ia64_lfhint_nt2: \ - asm volatile ("lfetch.fault.nt2 [%0]" : : "r"(y)); \ - break; \ - case ia64_lfhint_nta: \ - asm volatile ("lfetch.fault.nta [%0]" : : "r"(y)); \ - break; \ - } \ -}) - -#define ia64_lfetch_fault_excl(lfhint, y) \ -({ \ - switch (lfhint) { \ - case ia64_lfhint_none: \ - asm volatile ("lfetch.fault.excl [%0]" :: "r"(y)); \ - break; \ - case ia64_lfhint_nt1: \ - asm volatile ("lfetch.fault.excl.nt1 [%0]" :: "r"(y)); \ - break; \ - case ia64_lfhint_nt2: \ - asm volatile ("lfetch.fault.excl.nt2 [%0]" :: "r"(y)); \ - break; \ - case ia64_lfhint_nta: \ - asm volatile ("lfetch.fault.excl.nta [%0]" :: "r"(y)); \ - break; \ - } \ -}) - -#define ia64_native_intrin_local_irq_restore(x) \ -do { \ - asm volatile (";; cmp.ne p6,p7=%0,r0;;" \ - "(p6) ssm psr.i;" \ - "(p7) rsm psr.i;;" \ - "(p6) srlz.d" \ - :: "r"((x)) : "p6", "p7", "memory"); \ -} while (0) - -#endif /* _ASM_IA64_GCC_INTRIN_H */ diff --git a/include/asm-ia64/hardirq.h b/include/asm-ia64/hardirq.h deleted file mode 100644 index 140e495b8e0e..000000000000 --- a/include/asm-ia64/hardirq.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef _ASM_IA64_HARDIRQ_H -#define _ASM_IA64_HARDIRQ_H - -/* - * Modified 1998-2002, 2004 Hewlett-Packard Co - * David Mosberger-Tang - */ - - -#include -#include - -#include - -/* - * No irq_cpustat_t for IA-64. The data is held in the per-CPU data structure. - */ - -#define __ARCH_IRQ_STAT 1 - -#define local_softirq_pending() (local_cpu_data->softirq_pending) - -#define HARDIRQ_BITS 14 - -/* - * The hardirq mask has to be large enough to have space for potentially all IRQ sources - * in the system nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -extern void __iomem *ipi_base_addr; - -void ack_bad_irq(unsigned int irq); - -#endif /* _ASM_IA64_HARDIRQ_H */ diff --git a/include/asm-ia64/hpsim.h b/include/asm-ia64/hpsim.h deleted file mode 100644 index 892ab198a9da..000000000000 --- a/include/asm-ia64/hpsim.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _ASMIA64_HPSIM_H -#define _ASMIA64_HPSIM_H - -#ifndef CONFIG_HP_SIMSERIAL_CONSOLE -static inline int simcons_register(void) { return 1; } -#else -int simcons_register(void); -#endif - -struct tty_driver; -extern struct tty_driver *hp_simserial_driver; - -void ia64_ssc_connect_irq(long intr, long irq); -void ia64_ctl_trace(long on); - -#endif diff --git a/include/asm-ia64/hugetlb.h b/include/asm-ia64/hugetlb.h deleted file mode 100644 index da55c63728e0..000000000000 --- a/include/asm-ia64/hugetlb.h +++ /dev/null @@ -1,80 +0,0 @@ -#ifndef _ASM_IA64_HUGETLB_H -#define _ASM_IA64_HUGETLB_H - -#include - - -void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, - unsigned long end, unsigned long floor, - unsigned long ceiling); - -int prepare_hugepage_range(struct file *file, - unsigned long addr, unsigned long len); - -static inline int is_hugepage_only_range(struct mm_struct *mm, - unsigned long addr, - unsigned long len) -{ - return (REGION_NUMBER(addr) == RGN_HPAGE || - REGION_NUMBER((addr)+(len)-1) == RGN_HPAGE); -} - -static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) -{ -} - -static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) -{ - set_pte_at(mm, addr, ptep, pte); -} - -static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - return ptep_get_and_clear(mm, addr, ptep); -} - -static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep) -{ -} - -static inline int huge_pte_none(pte_t pte) -{ - return pte_none(pte); -} - -static inline pte_t huge_pte_wrprotect(pte_t pte) -{ - return pte_wrprotect(pte); -} - -static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - ptep_set_wrprotect(mm, addr, ptep); -} - -static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep, - pte_t pte, int dirty) -{ - return ptep_set_access_flags(vma, addr, ptep, pte, dirty); -} - -static inline pte_t huge_ptep_get(pte_t *ptep) -{ - return *ptep; -} - -static inline int arch_prepare_hugepage(struct page *page) -{ - return 0; -} - -static inline void arch_release_hugepage(struct page *page) -{ -} - -#endif /* _ASM_IA64_HUGETLB_H */ diff --git a/include/asm-ia64/hw_irq.h b/include/asm-ia64/hw_irq.h deleted file mode 100644 index 5c99cbcb8a0d..000000000000 --- a/include/asm-ia64/hw_irq.h +++ /dev/null @@ -1,192 +0,0 @@ -#ifndef _ASM_IA64_HW_IRQ_H -#define _ASM_IA64_HW_IRQ_H - -/* - * Copyright (C) 2001-2003 Hewlett-Packard Co - * David Mosberger-Tang - */ - -#include -#include -#include -#include - -#include -#include -#include - -#ifndef CONFIG_PARAVIRT -typedef u8 ia64_vector; -#else -typedef u16 ia64_vector; -#endif - -/* - * 0 special - * - * 1,3-14 are reserved from firmware - * - * 16-255 (vectored external interrupts) are available - * - * 15 spurious interrupt (see IVR) - * - * 16 lowest priority, 255 highest priority - * - * 15 classes of 16 interrupts each. - */ -#define IA64_MIN_VECTORED_IRQ 16 -#define IA64_MAX_VECTORED_IRQ 255 -#define IA64_NUM_VECTORS 256 - -#define AUTO_ASSIGN -1 - -#define IA64_SPURIOUS_INT_VECTOR 0x0f - -/* - * Vectors 0x10-0x1f are used for low priority interrupts, e.g. CMCI. - */ -#define IA64_CPEP_VECTOR 0x1c /* corrected platform error polling vector */ -#define IA64_CMCP_VECTOR 0x1d /* corrected machine-check polling vector */ -#define IA64_CPE_VECTOR 0x1e /* corrected platform error interrupt vector */ -#define IA64_CMC_VECTOR 0x1f /* corrected machine-check interrupt vector */ -/* - * Vectors 0x20-0x2f are reserved for legacy ISA IRQs. - * Use vectors 0x30-0xe7 as the default device vector range for ia64. - * Platforms may choose to reduce this range in platform_irq_setup, but the - * platform range must fall within - * [IA64_DEF_FIRST_DEVICE_VECTOR..IA64_DEF_LAST_DEVICE_VECTOR] - */ -extern int ia64_first_device_vector; -extern int ia64_last_device_vector; - -#define IA64_DEF_FIRST_DEVICE_VECTOR 0x30 -#define IA64_DEF_LAST_DEVICE_VECTOR 0xe7 -#define IA64_FIRST_DEVICE_VECTOR ia64_first_device_vector -#define IA64_LAST_DEVICE_VECTOR ia64_last_device_vector -#define IA64_MAX_DEVICE_VECTORS (IA64_DEF_LAST_DEVICE_VECTOR - IA64_DEF_FIRST_DEVICE_VECTOR + 1) -#define IA64_NUM_DEVICE_VECTORS (IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1) - -#define IA64_MCA_RENDEZ_VECTOR 0xe8 /* MCA rendez interrupt */ -#define IA64_PERFMON_VECTOR 0xee /* performance monitor interrupt vector */ -#define IA64_TIMER_VECTOR 0xef /* use highest-prio group 15 interrupt for timer */ -#define IA64_MCA_WAKEUP_VECTOR 0xf0 /* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */ -#define IA64_IPI_LOCAL_TLB_FLUSH 0xfc /* SMP flush local TLB */ -#define IA64_IPI_RESCHEDULE 0xfd /* SMP reschedule */ -#define IA64_IPI_VECTOR 0xfe /* inter-processor interrupt vector */ - -/* Used for encoding redirected irqs */ - -#define IA64_IRQ_REDIRECTED (1 << 31) - -/* IA64 inter-cpu interrupt related definitions */ - -#define IA64_IPI_DEFAULT_BASE_ADDR 0xfee00000 - -/* Delivery modes for inter-cpu interrupts */ -enum { - IA64_IPI_DM_INT = 0x0, /* pend an external interrupt */ - IA64_IPI_DM_PMI = 0x2, /* pend a PMI */ - IA64_IPI_DM_NMI = 0x4, /* pend an NMI (vector 2) */ - IA64_IPI_DM_INIT = 0x5, /* pend an INIT interrupt */ - IA64_IPI_DM_EXTINT = 0x7, /* pend an 8259-compatible interrupt. */ -}; - -extern __u8 isa_irq_to_vector_map[16]; -#define isa_irq_to_vector(x) isa_irq_to_vector_map[(x)] - -struct irq_cfg { - ia64_vector vector; - cpumask_t domain; - cpumask_t old_domain; - unsigned move_cleanup_count; - u8 move_in_progress : 1; -}; -extern spinlock_t vector_lock; -extern struct irq_cfg irq_cfg[NR_IRQS]; -#define irq_to_domain(x) irq_cfg[(x)].domain -DECLARE_PER_CPU(int[IA64_NUM_VECTORS], vector_irq); - -extern struct hw_interrupt_type irq_type_ia64_lsapic; /* CPU-internal interrupt controller */ - -#ifdef CONFIG_PARAVIRT_GUEST -#include -#else -#define ia64_register_ipi ia64_native_register_ipi -#define assign_irq_vector ia64_native_assign_irq_vector -#define free_irq_vector ia64_native_free_irq_vector -#define register_percpu_irq ia64_native_register_percpu_irq -#define ia64_resend_irq ia64_native_resend_irq -#endif - -extern void ia64_native_register_ipi(void); -extern int bind_irq_vector(int irq, int vector, cpumask_t domain); -extern int ia64_native_assign_irq_vector (int irq); /* allocate a free vector */ -extern void ia64_native_free_irq_vector (int vector); -extern int reserve_irq_vector (int vector); -extern void __setup_vector_irq(int cpu); -extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect); -extern void ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action); -extern int check_irq_used (int irq); -extern void destroy_and_reserve_irq (unsigned int irq); - -#if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG)) -extern int irq_prepare_move(int irq, int cpu); -extern void irq_complete_move(unsigned int irq); -#else -static inline int irq_prepare_move(int irq, int cpu) { return 0; } -static inline void irq_complete_move(unsigned int irq) {} -#endif - -static inline void ia64_native_resend_irq(unsigned int vector) -{ - platform_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0); -} - -/* - * Default implementations for the irq-descriptor API: - */ - -extern irq_desc_t irq_desc[NR_IRQS]; - -#ifndef CONFIG_IA64_GENERIC -static inline ia64_vector __ia64_irq_to_vector(int irq) -{ - return irq_cfg[irq].vector; -} - -static inline unsigned int -__ia64_local_vector_to_irq (ia64_vector vec) -{ - return __get_cpu_var(vector_irq)[vec]; -} -#endif - -/* - * Next follows the irq descriptor interface. On IA-64, each CPU supports 256 interrupt - * vectors. On smaller systems, there is a one-to-one correspondence between interrupt - * vectors and the Linux irq numbers. However, larger systems may have multiple interrupt - * domains meaning that the translation from vector number to irq number depends on the - * interrupt domain that a CPU belongs to. This API abstracts such platform-dependent - * differences and provides a uniform means to translate between vector and irq numbers - * and to obtain the irq descriptor for a given irq number. - */ - -/* Extract the IA-64 vector that corresponds to IRQ. */ -static inline ia64_vector -irq_to_vector (int irq) -{ - return platform_irq_to_vector(irq); -} - -/* - * Convert the local IA-64 vector to the corresponding irq number. This translation is - * done in the context of the interrupt domain that the currently executing CPU belongs - * to. - */ -static inline unsigned int -local_vector_to_irq (ia64_vector vec) -{ - return platform_local_vector_to_irq(vec); -} - -#endif /* _ASM_IA64_HW_IRQ_H */ diff --git a/include/asm-ia64/ia32.h b/include/asm-ia64/ia32.h deleted file mode 100644 index 2390ee145aa1..000000000000 --- a/include/asm-ia64/ia32.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef _ASM_IA64_IA32_H -#define _ASM_IA64_IA32_H - - -#include -#include - -#define IA32_NR_syscalls 285 /* length of syscall table */ -#define IA32_PAGE_SHIFT 12 /* 4KB pages */ - -#ifndef __ASSEMBLY__ - -# ifdef CONFIG_IA32_SUPPORT - -#define IA32_PAGE_OFFSET 0xc0000000 - -extern void ia32_cpu_init (void); -extern void ia32_mem_init (void); -extern void ia32_gdt_init (void); -extern int ia32_exception (struct pt_regs *regs, unsigned long isr); -extern int ia32_intercept (struct pt_regs *regs, unsigned long isr); -extern int ia32_clone_tls (struct task_struct *child, struct pt_regs *childregs); - -# endif /* !CONFIG_IA32_SUPPORT */ - -/* Declare this unconditionally, so we don't get warnings for unreachable code. */ -extern int ia32_setup_frame1 (int sig, struct k_sigaction *ka, siginfo_t *info, - sigset_t *set, struct pt_regs *regs); -#if PAGE_SHIFT > IA32_PAGE_SHIFT -extern int ia32_copy_ia64_partial_page_list(struct task_struct *, - unsigned long); -extern void ia32_drop_ia64_partial_page_list(struct task_struct *); -#else -# define ia32_copy_ia64_partial_page_list(a1, a2) 0 -# define ia32_drop_ia64_partial_page_list(a1) do { ; } while (0) -#endif - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_IA64_IA32_H */ diff --git a/include/asm-ia64/ia64regs.h b/include/asm-ia64/ia64regs.h deleted file mode 100644 index 1757f1c11ad4..000000000000 --- a/include/asm-ia64/ia64regs.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Copyright (C) 2002,2003 Intel Corp. - * Jun Nakajima - * Suresh Siddha - */ - -#ifndef _ASM_IA64_IA64REGS_H -#define _ASM_IA64_IA64REGS_H - -/* - * Register Names for getreg() and setreg(). - * - * The "magic" numbers happen to match the values used by the Intel compiler's - * getreg()/setreg() intrinsics. - */ - -/* Special Registers */ - -#define _IA64_REG_IP 1016 /* getreg only */ -#define _IA64_REG_PSR 1019 -#define _IA64_REG_PSR_L 1019 - -/* General Integer Registers */ - -#define _IA64_REG_GP 1025 /* R1 */ -#define _IA64_REG_R8 1032 /* R8 */ -#define _IA64_REG_R9 1033 /* R9 */ -#define _IA64_REG_SP 1036 /* R12 */ -#define _IA64_REG_TP 1037 /* R13 */ - -/* Application Registers */ - -#define _IA64_REG_AR_KR0 3072 -#define _IA64_REG_AR_KR1 3073 -#define _IA64_REG_AR_KR2 3074 -#define _IA64_REG_AR_KR3 3075 -#define _IA64_REG_AR_KR4 3076 -#define _IA64_REG_AR_KR5 3077 -#define _IA64_REG_AR_KR6 3078 -#define _IA64_REG_AR_KR7 3079 -#define _IA64_REG_AR_RSC 3088 -#define _IA64_REG_AR_BSP 3089 -#define _IA64_REG_AR_BSPSTORE 3090 -#define _IA64_REG_AR_RNAT 3091 -#define _IA64_REG_AR_FCR 3093 -#define _IA64_REG_AR_EFLAG 3096 -#define _IA64_REG_AR_CSD 3097 -#define _IA64_REG_AR_SSD 3098 -#define _IA64_REG_AR_CFLAG 3099 -#define _IA64_REG_AR_FSR 3100 -#define _IA64_REG_AR_FIR 3101 -#define _IA64_REG_AR_FDR 3102 -#define _IA64_REG_AR_CCV 3104 -#define _IA64_REG_AR_UNAT 3108 -#define _IA64_REG_AR_FPSR 3112 -#define _IA64_REG_AR_ITC 3116 -#define _IA64_REG_AR_PFS 3136 -#define _IA64_REG_AR_LC 3137 -#define _IA64_REG_AR_EC 3138 - -/* Control Registers */ - -#define _IA64_REG_CR_DCR 4096 -#define _IA64_REG_CR_ITM 4097 -#define _IA64_REG_CR_IVA 4098 -#define _IA64_REG_CR_PTA 4104 -#define _IA64_REG_CR_IPSR 4112 -#define _IA64_REG_CR_ISR 4113 -#define _IA64_REG_CR_IIP 4115 -#define _IA64_REG_CR_IFA 4116 -#define _IA64_REG_CR_ITIR 4117 -#define _IA64_REG_CR_IIPA 4118 -#define _IA64_REG_CR_IFS 4119 -#define _IA64_REG_CR_IIM 4120 -#define _IA64_REG_CR_IHA 4121 -#define _IA64_REG_CR_LID 4160 -#define _IA64_REG_CR_IVR 4161 /* getreg only */ -#define _IA64_REG_CR_TPR 4162 -#define _IA64_REG_CR_EOI 4163 -#define _IA64_REG_CR_IRR0 4164 /* getreg only */ -#define _IA64_REG_CR_IRR1 4165 /* getreg only */ -#define _IA64_REG_CR_IRR2 4166 /* getreg only */ -#define _IA64_REG_CR_IRR3 4167 /* getreg only */ -#define _IA64_REG_CR_ITV 4168 -#define _IA64_REG_CR_PMV 4169 -#define _IA64_REG_CR_CMCV 4170 -#define _IA64_REG_CR_LRR0 4176 -#define _IA64_REG_CR_LRR1 4177 - -/* Indirect Registers for getindreg() and setindreg() */ - -#define _IA64_REG_INDR_CPUID 9000 /* getindreg only */ -#define _IA64_REG_INDR_DBR 9001 -#define _IA64_REG_INDR_IBR 9002 -#define _IA64_REG_INDR_PKR 9003 -#define _IA64_REG_INDR_PMC 9004 -#define _IA64_REG_INDR_PMD 9005 -#define _IA64_REG_INDR_RR 9006 - -#endif /* _ASM_IA64_IA64REGS_H */ diff --git a/include/asm-ia64/intel_intrin.h b/include/asm-ia64/intel_intrin.h deleted file mode 100644 index 53cec577558a..000000000000 --- a/include/asm-ia64/intel_intrin.h +++ /dev/null @@ -1,161 +0,0 @@ -#ifndef _ASM_IA64_INTEL_INTRIN_H -#define _ASM_IA64_INTEL_INTRIN_H -/* - * Intel Compiler Intrinsics - * - * Copyright (C) 2002,2003 Jun Nakajima - * Copyright (C) 2002,2003 Suresh Siddha - * Copyright (C) 2005,2006 Hongjiu Lu - * - */ -#include - -#define ia64_barrier() __memory_barrier() - -#define ia64_stop() /* Nothing: As of now stop bit is generated for each - * intrinsic - */ - -#define ia64_native_getreg __getReg -#define ia64_native_setreg __setReg - -#define ia64_hint __hint -#define ia64_hint_pause __hint_pause - -#define ia64_mux1_brcst _m64_mux1_brcst -#define ia64_mux1_mix _m64_mux1_mix -#define ia64_mux1_shuf _m64_mux1_shuf -#define ia64_mux1_alt _m64_mux1_alt -#define ia64_mux1_rev _m64_mux1_rev - -#define ia64_mux1(x,v) _m_to_int64(_m64_mux1(_m_from_int64(x), (v))) -#define ia64_popcnt _m64_popcnt -#define ia64_getf_exp __getf_exp -#define ia64_shrp _m64_shrp - -#define ia64_tpa __tpa -#define ia64_invala __invala -#define ia64_invala_gr __invala_gr -#define ia64_invala_fr __invala_fr -#define ia64_nop __nop -#define ia64_sum __sum -#define ia64_native_ssm __ssm -#define ia64_rum __rum -#define ia64_native_rsm __rsm -#define ia64_native_fc __fc - -#define ia64_ldfs __ldfs -#define ia64_ldfd __ldfd -#define ia64_ldfe __ldfe -#define ia64_ldf8 __ldf8 -#define ia64_ldf_fill __ldf_fill - -#define ia64_stfs __stfs -#define ia64_stfd __stfd -#define ia64_stfe __stfe -#define ia64_stf8 __stf8 -#define ia64_stf_spill __stf_spill - -#define ia64_mf __mf -#define ia64_mfa __mfa - -#define ia64_fetchadd4_acq __fetchadd4_acq -#define ia64_fetchadd4_rel __fetchadd4_rel -#define ia64_fetchadd8_acq __fetchadd8_acq -#define ia64_fetchadd8_rel __fetchadd8_rel - -#define ia64_xchg1 _InterlockedExchange8 -#define ia64_xchg2 _InterlockedExchange16 -#define ia64_xchg4 _InterlockedExchange -#define ia64_xchg8 _InterlockedExchange64 - -#define ia64_cmpxchg1_rel _InterlockedCompareExchange8_rel -#define ia64_cmpxchg1_acq _InterlockedCompareExchange8_acq -#define ia64_cmpxchg2_rel _InterlockedCompareExchange16_rel -#define ia64_cmpxchg2_acq _InterlockedCompareExchange16_acq -#define ia64_cmpxchg4_rel _InterlockedCompareExchange_rel -#define ia64_cmpxchg4_acq _InterlockedCompareExchange_acq -#define ia64_cmpxchg8_rel _InterlockedCompareExchange64_rel -#define ia64_cmpxchg8_acq _InterlockedCompareExchange64_acq - -#define __ia64_set_dbr(index, val) \ - __setIndReg(_IA64_REG_INDR_DBR, index, val) -#define ia64_set_ibr(index, val) \ - __setIndReg(_IA64_REG_INDR_IBR, index, val) -#define ia64_set_pkr(index, val) \ - __setIndReg(_IA64_REG_INDR_PKR, index, val) -#define ia64_set_pmc(index, val) \ - __setIndReg(_IA64_REG_INDR_PMC, index, val) -#define ia64_set_pmd(index, val) \ - __setIndReg(_IA64_REG_INDR_PMD, index, val) -#define ia64_native_set_rr(index, val) \ - __setIndReg(_IA64_REG_INDR_RR, index, val) - -#define ia64_native_get_cpuid(index) \ - __getIndReg(_IA64_REG_INDR_CPUID, index) -#define __ia64_get_dbr(index) __getIndReg(_IA64_REG_INDR_DBR, index) -#define ia64_get_ibr(index) __getIndReg(_IA64_REG_INDR_IBR, index) -#define ia64_get_pkr(index) __getIndReg(_IA64_REG_INDR_PKR, index) -#define ia64_get_pmc(index) __getIndReg(_IA64_REG_INDR_PMC, index) -#define ia64_native_get_pmd(index) __getIndReg(_IA64_REG_INDR_PMD, index) -#define ia64_native_get_rr(index) __getIndReg(_IA64_REG_INDR_RR, index) - -#define ia64_srlz_d __dsrlz -#define ia64_srlz_i __isrlz - -#define ia64_dv_serialize_data() -#define ia64_dv_serialize_instruction() - -#define ia64_st1_rel __st1_rel -#define ia64_st2_rel __st2_rel -#define ia64_st4_rel __st4_rel -#define ia64_st8_rel __st8_rel - -/* FIXME: need st4.rel.nta intrinsic */ -#define ia64_st4_rel_nta __st4_rel - -#define ia64_ld1_acq __ld1_acq -#define ia64_ld2_acq __ld2_acq -#define ia64_ld4_acq __ld4_acq -#define ia64_ld8_acq __ld8_acq - -#define ia64_sync_i __synci -#define ia64_native_thash __thash -#define ia64_native_ttag __ttag -#define ia64_itcd __itcd -#define ia64_itci __itci -#define ia64_itrd __itrd -#define ia64_itri __itri -#define ia64_ptce __ptce -#define ia64_ptcl __ptcl -#define ia64_native_ptcg __ptcg -#define ia64_native_ptcga __ptcga -#define ia64_ptri __ptri -#define ia64_ptrd __ptrd -#define ia64_dep_mi _m64_dep_mi - -/* Values for lfhint in __lfetch and __lfetch_fault */ - -#define ia64_lfhint_none __lfhint_none -#define ia64_lfhint_nt1 __lfhint_nt1 -#define ia64_lfhint_nt2 __lfhint_nt2 -#define ia64_lfhint_nta __lfhint_nta - -#define ia64_lfetch __lfetch -#define ia64_lfetch_excl __lfetch_excl -#define ia64_lfetch_fault __lfetch_fault -#define ia64_lfetch_fault_excl __lfetch_fault_excl - -#define ia64_native_intrin_local_irq_restore(x) \ -do { \ - if ((x) != 0) { \ - ia64_native_ssm(IA64_PSR_I); \ - ia64_srlz_d(); \ - } else { \ - ia64_native_rsm(IA64_PSR_I); \ - } \ -} while (0) - -#define __builtin_trap() __break(0); - -#endif /* _ASM_IA64_INTEL_INTRIN_H */ diff --git a/include/asm-ia64/intrinsics.h b/include/asm-ia64/intrinsics.h deleted file mode 100644 index 47d686dba1eb..000000000000 --- a/include/asm-ia64/intrinsics.h +++ /dev/null @@ -1,241 +0,0 @@ -#ifndef _ASM_IA64_INTRINSICS_H -#define _ASM_IA64_INTRINSICS_H - -/* - * Compiler-dependent intrinsics. - * - * Copyright (C) 2002-2003 Hewlett-Packard Co - * David Mosberger-Tang - */ - -#ifndef __ASSEMBLY__ - -/* include compiler specific intrinsics */ -#include -#ifdef __INTEL_COMPILER -# include -#else -# include -#endif - -#define ia64_native_get_psr_i() (ia64_native_getreg(_IA64_REG_PSR) & IA64_PSR_I) - -#define ia64_native_set_rr0_to_rr4(val0, val1, val2, val3, val4) \ -do { \ - ia64_native_set_rr(0x0000000000000000UL, (val0)); \ - ia64_native_set_rr(0x2000000000000000UL, (val1)); \ - ia64_native_set_rr(0x4000000000000000UL, (val2)); \ - ia64_native_set_rr(0x6000000000000000UL, (val3)); \ - ia64_native_set_rr(0x8000000000000000UL, (val4)); \ -} while (0) - -/* - * Force an unresolved reference if someone tries to use - * ia64_fetch_and_add() with a bad value. - */ -extern unsigned long __bad_size_for_ia64_fetch_and_add (void); -extern unsigned long __bad_increment_for_ia64_fetch_and_add (void); - -#define IA64_FETCHADD(tmp,v,n,sz,sem) \ -({ \ - switch (sz) { \ - case 4: \ - tmp = ia64_fetchadd4_##sem((unsigned int *) v, n); \ - break; \ - \ - case 8: \ - tmp = ia64_fetchadd8_##sem((unsigned long *) v, n); \ - break; \ - \ - default: \ - __bad_size_for_ia64_fetch_and_add(); \ - } \ -}) - -#define ia64_fetchadd(i,v,sem) \ -({ \ - __u64 _tmp; \ - volatile __typeof__(*(v)) *_v = (v); \ - /* Can't use a switch () here: gcc isn't always smart enough for that... */ \ - if ((i) == -16) \ - IA64_FETCHADD(_tmp, _v, -16, sizeof(*(v)), sem); \ - else if ((i) == -8) \ - IA64_FETCHADD(_tmp, _v, -8, sizeof(*(v)), sem); \ - else if ((i) == -4) \ - IA64_FETCHADD(_tmp, _v, -4, sizeof(*(v)), sem); \ - else if ((i) == -1) \ - IA64_FETCHADD(_tmp, _v, -1, sizeof(*(v)), sem); \ - else if ((i) == 1) \ - IA64_FETCHADD(_tmp, _v, 1, sizeof(*(v)), sem); \ - else if ((i) == 4) \ - IA64_FETCHADD(_tmp, _v, 4, sizeof(*(v)), sem); \ - else if ((i) == 8) \ - IA64_FETCHADD(_tmp, _v, 8, sizeof(*(v)), sem); \ - else if ((i) == 16) \ - IA64_FETCHADD(_tmp, _v, 16, sizeof(*(v)), sem); \ - else \ - _tmp = __bad_increment_for_ia64_fetch_and_add(); \ - (__typeof__(*(v))) (_tmp); /* return old value */ \ -}) - -#define ia64_fetch_and_add(i,v) (ia64_fetchadd(i, v, rel) + (i)) /* return new value */ - -/* - * This function doesn't exist, so you'll get a linker error if - * something tries to do an invalid xchg(). - */ -extern void ia64_xchg_called_with_bad_pointer (void); - -#define __xchg(x,ptr,size) \ -({ \ - unsigned long __xchg_result; \ - \ - switch (size) { \ - case 1: \ - __xchg_result = ia64_xchg1((__u8 *)ptr, x); \ - break; \ - \ - case 2: \ - __xchg_result = ia64_xchg2((__u16 *)ptr, x); \ - break; \ - \ - case 4: \ - __xchg_result = ia64_xchg4((__u32 *)ptr, x); \ - break; \ - \ - case 8: \ - __xchg_result = ia64_xchg8((__u64 *)ptr, x); \ - break; \ - default: \ - ia64_xchg_called_with_bad_pointer(); \ - } \ - __xchg_result; \ -}) - -#define xchg(ptr,x) \ - ((__typeof__(*(ptr))) __xchg ((unsigned long) (x), (ptr), sizeof(*(ptr)))) - -/* - * Atomic compare and exchange. Compare OLD with MEM, if identical, - * store NEW in MEM. Return the initial value in MEM. Success is - * indicated by comparing RETURN with OLD. - */ - -#define __HAVE_ARCH_CMPXCHG 1 - -/* - * This function doesn't exist, so you'll get a linker error - * if something tries to do an invalid cmpxchg(). - */ -extern long ia64_cmpxchg_called_with_bad_pointer (void); - -#define ia64_cmpxchg(sem,ptr,old,new,size) \ -({ \ - __u64 _o_, _r_; \ - \ - switch (size) { \ - case 1: _o_ = (__u8 ) (long) (old); break; \ - case 2: _o_ = (__u16) (long) (old); break; \ - case 4: _o_ = (__u32) (long) (old); break; \ - case 8: _o_ = (__u64) (long) (old); break; \ - default: break; \ - } \ - switch (size) { \ - case 1: \ - _r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_); \ - break; \ - \ - case 2: \ - _r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_); \ - break; \ - \ - case 4: \ - _r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_); \ - break; \ - \ - case 8: \ - _r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_); \ - break; \ - \ - default: \ - _r_ = ia64_cmpxchg_called_with_bad_pointer(); \ - break; \ - } \ - (__typeof__(old)) _r_; \ -}) - -#define cmpxchg_acq(ptr, o, n) \ - ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr))) -#define cmpxchg_rel(ptr, o, n) \ - ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr))) - -/* for compatibility with other platforms: */ -#define cmpxchg(ptr, o, n) cmpxchg_acq((ptr), (o), (n)) -#define cmpxchg64(ptr, o, n) cmpxchg_acq((ptr), (o), (n)) - -#define cmpxchg_local cmpxchg -#define cmpxchg64_local cmpxchg64 - -#ifdef CONFIG_IA64_DEBUG_CMPXCHG -# define CMPXCHG_BUGCHECK_DECL int _cmpxchg_bugcheck_count = 128; -# define CMPXCHG_BUGCHECK(v) \ - do { \ - if (_cmpxchg_bugcheck_count-- <= 0) { \ - void *ip; \ - extern int printk(const char *fmt, ...); \ - ip = (void *) ia64_getreg(_IA64_REG_IP); \ - printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v)); \ - break; \ - } \ - } while (0) -#else /* !CONFIG_IA64_DEBUG_CMPXCHG */ -# define CMPXCHG_BUGCHECK_DECL -# define CMPXCHG_BUGCHECK(v) -#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */ - -#endif - -#ifdef __KERNEL__ -#include -#endif - -#ifndef __ASSEMBLY__ -#if defined(CONFIG_PARAVIRT) && defined(__KERNEL__) -#define IA64_INTRINSIC_API(name) pv_cpu_ops.name -#define IA64_INTRINSIC_MACRO(name) paravirt_ ## name -#else -#define IA64_INTRINSIC_API(name) ia64_native_ ## name -#define IA64_INTRINSIC_MACRO(name) ia64_native_ ## name -#endif - -/************************************************/ -/* Instructions paravirtualized for correctness */ -/************************************************/ -/* fc, thash, get_cpuid, get_pmd, get_eflags, set_eflags */ -/* Note that "ttag" and "cover" are also privilege-sensitive; "ttag" - * is not currently used (though it may be in a long-format VHPT system!) - */ -#define ia64_fc IA64_INTRINSIC_API(fc) -#define ia64_thash IA64_INTRINSIC_API(thash) -#define ia64_get_cpuid IA64_INTRINSIC_API(get_cpuid) -#define ia64_get_pmd IA64_INTRINSIC_API(get_pmd) - - -/************************************************/ -/* Instructions paravirtualized for performance */ -/************************************************/ -#define ia64_ssm IA64_INTRINSIC_MACRO(ssm) -#define ia64_rsm IA64_INTRINSIC_MACRO(rsm) -#define ia64_getreg IA64_INTRINSIC_API(getreg) -#define ia64_setreg IA64_INTRINSIC_API(setreg) -#define ia64_set_rr IA64_INTRINSIC_API(set_rr) -#define ia64_get_rr IA64_INTRINSIC_API(get_rr) -#define ia64_ptcga IA64_INTRINSIC_API(ptcga) -#define ia64_get_psr_i IA64_INTRINSIC_API(get_psr_i) -#define ia64_intrin_local_irq_restore \ - IA64_INTRINSIC_API(intrin_local_irq_restore) -#define ia64_set_rr0_to_rr4 IA64_INTRINSIC_API(set_rr0_to_rr4) - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_IA64_INTRINSICS_H */ diff --git a/include/asm-ia64/io.h b/include/asm-ia64/io.h deleted file mode 100644 index 260a85ac9d6a..000000000000 --- a/include/asm-ia64/io.h +++ /dev/null @@ -1,459 +0,0 @@ -#ifndef _ASM_IA64_IO_H -#define _ASM_IA64_IO_H - -/* - * This file contains the definitions for the emulated IO instructions - * inb/inw/inl/outb/outw/outl and the "string versions" of the same - * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" - * versions of the single-IO instructions (inb_p/inw_p/..). - * - * This file is not meant to be obfuscating: it's just complicated to - * (a) handle it all in a way that makes gcc able to optimize it as - * well as possible and (b) trying to avoid writing the same thing - * over and over again with slight variations and possibly making a - * mistake somewhere. - * - * Copyright (C) 1998-2003 Hewlett-Packard Co - * David Mosberger-Tang - * Copyright (C) 1999 Asit Mallick - * Copyright (C) 1999 Don Dugger - */ - -/* We don't use IO slowdowns on the ia64, but.. */ -#define __SLOW_DOWN_IO do { } while (0) -#define SLOW_DOWN_IO do { } while (0) - -#define __IA64_UNCACHED_OFFSET RGN_BASE(RGN_UNCACHED) - -/* - * The legacy I/O space defined by the ia64 architecture supports only 65536 ports, but - * large machines may have multiple other I/O spaces so we can't place any a priori limit - * on IO_SPACE_LIMIT. These additional spaces are described in ACPI. - */ -#define IO_SPACE_LIMIT 0xffffffffffffffffUL - -#define MAX_IO_SPACES_BITS 8 -#define MAX_IO_SPACES (1UL << MAX_IO_SPACES_BITS) -#define IO_SPACE_BITS 24 -#define IO_SPACE_SIZE (1UL << IO_SPACE_BITS) - -#define IO_SPACE_NR(port) ((port) >> IO_SPACE_BITS) -#define IO_SPACE_BASE(space) ((space) << IO_SPACE_BITS) -#define IO_SPACE_PORT(port) ((port) & (IO_SPACE_SIZE - 1)) - -#define IO_SPACE_SPARSE_ENCODING(p) ((((p) >> 2) << 12) | ((p) & 0xfff)) - -struct io_space { - unsigned long mmio_base; /* base in MMIO space */ - int sparse; -}; - -extern struct io_space io_space[]; -extern unsigned int num_io_spaces; - -# ifdef __KERNEL__ - -/* - * All MMIO iomem cookies are in region 6; anything less is a PIO cookie: - * 0xCxxxxxxxxxxxxxxx MMIO cookie (return from ioremap) - * 0x000000001SPPPPPP PIO cookie (S=space number, P..P=port) - * - * ioread/writeX() uses the leading 1 in PIO cookies (PIO_OFFSET) to catch - * code that uses bare port numbers without the prerequisite pci_iomap(). - */ -#define PIO_OFFSET (1UL << (MAX_IO_SPACES_BITS + IO_SPACE_BITS)) -#define PIO_MASK (PIO_OFFSET - 1) -#define PIO_RESERVED __IA64_UNCACHED_OFFSET -#define HAVE_ARCH_PIO_SIZE - -#include -#include -#include -#include -#include - -/* - * Change virtual addresses to physical addresses and vv. - */ -static inline unsigned long -virt_to_phys (volatile void *address) -{ - return (unsigned long) address - PAGE_OFFSET; -} - -static inline void* -phys_to_virt (unsigned long address) -{ - return (void *) (address + PAGE_OFFSET); -} - -#define ARCH_HAS_VALID_PHYS_ADDR_RANGE -extern u64 kern_mem_attribute (unsigned long phys_addr, unsigned long size); -extern int valid_phys_addr_range (unsigned long addr, size_t count); /* efi.c */ -extern int valid_mmap_phys_addr_range (unsigned long pfn, size_t count); - -/* - * The following two macros are deprecated and scheduled for removal. - * Please use the PCI-DMA interface defined in instead. - */ -#define bus_to_virt phys_to_virt -#define virt_to_bus virt_to_phys -#define page_to_bus page_to_phys - -# endif /* KERNEL */ - -/* - * Memory fence w/accept. This should never be used in code that is - * not IA-64 specific. - */ -#define __ia64_mf_a() ia64_mfa() - -/** - * ___ia64_mmiowb - I/O write barrier - * - * Ensure ordering of I/O space writes. This will make sure that writes - * following the barrier will arrive after all previous writes. For most - * ia64 platforms, this is a simple 'mf.a' instruction. - * - * See Documentation/DocBook/deviceiobook.tmpl for more information. - */ -static inline void ___ia64_mmiowb(void) -{ - ia64_mfa(); -} - -static inline void* -__ia64_mk_io_addr (unsigned long port) -{ - struct io_space *space; - unsigned long offset; - - space = &io_space[IO_SPACE_NR(port)]; - port = IO_SPACE_PORT(port); - if (space->sparse) - offset = IO_SPACE_SPARSE_ENCODING(port); - else - offset = port; - - return (void *) (space->mmio_base | offset); -} - -#define __ia64_inb ___ia64_inb -#define __ia64_inw ___ia64_inw -#define __ia64_inl ___ia64_inl -#define __ia64_outb ___ia64_outb -#define __ia64_outw ___ia64_outw -#define __ia64_outl ___ia64_outl -#define __ia64_readb ___ia64_readb -#define __ia64_readw ___ia64_readw -#define __ia64_readl ___ia64_readl -#define __ia64_readq ___ia64_readq -#define __ia64_readb_relaxed ___ia64_readb -#define __ia64_readw_relaxed ___ia64_readw -#define __ia64_readl_relaxed ___ia64_readl -#define __ia64_readq_relaxed ___ia64_readq -#define __ia64_writeb ___ia64_writeb -#define __ia64_writew ___ia64_writew -#define __ia64_writel ___ia64_writel -#define __ia64_writeq ___ia64_writeq -#define __ia64_mmiowb ___ia64_mmiowb - -/* - * For the in/out routines, we need to do "mf.a" _after_ doing the I/O access to ensure - * that the access has completed before executing other I/O accesses. Since we're doing - * the accesses through an uncachable (UC) translation, the CPU will execute them in - * program order. However, we still need to tell the compiler not to shuffle them around - * during optimization, which is why we use "volatile" pointers. - */ - -static inline unsigned int -___ia64_inb (unsigned long port) -{ - volatile unsigned char *addr = __ia64_mk_io_addr(port); - unsigned char ret; - - ret = *addr; - __ia64_mf_a(); - return ret; -} - -static inline unsigned int -___ia64_inw (unsigned long port) -{ - volatile unsigned short *addr = __ia64_mk_io_addr(port); - unsigned short ret; - - ret = *addr; - __ia64_mf_a(); - return ret; -} - -static inline unsigned int -___ia64_inl (unsigned long port) -{ - volatile unsigned int *addr = __ia64_mk_io_addr(port); - unsigned int ret; - - ret = *addr; - __ia64_mf_a(); - return ret; -} - -static inline void -___ia64_outb (unsigned char val, unsigned long port) -{ - volatile unsigned char *addr = __ia64_mk_io_addr(port); - - *addr = val; - __ia64_mf_a(); -} - -static inline void -___ia64_outw (unsigned short val, unsigned long port) -{ - volatile unsigned short *addr = __ia64_mk_io_addr(port); - - *addr = val; - __ia64_mf_a(); -} - -static inline void -___ia64_outl (unsigned int val, unsigned long port) -{ - volatile unsigned int *addr = __ia64_mk_io_addr(port); - - *addr = val; - __ia64_mf_a(); -} - -static inline void -__insb (unsigned long port, void *dst, unsigned long count) -{ - unsigned char *dp = dst; - - while (count--) - *dp++ = platform_inb(port); -} - -static inline void -__insw (unsigned long port, void *dst, unsigned long count) -{ - unsigned short *dp = dst; - - while (count--) - *dp++ = platform_inw(port); -} - -static inline void -__insl (unsigned long port, void *dst, unsigned long count) -{ - unsigned int *dp = dst; - - while (count--) - *dp++ = platform_inl(port); -} - -static inline void -__outsb (unsigned long port, const void *src, unsigned long count) -{ - const unsigned char *sp = src; - - while (count--) - platform_outb(*sp++, port); -} - -static inline void -__outsw (unsigned long port, const void *src, unsigned long count) -{ - const unsigned short *sp = src; - - while (count--) - platform_outw(*sp++, port); -} - -static inline void -__outsl (unsigned long port, const void *src, unsigned long count) -{ - const unsigned int *sp = src; - - while (count--) - platform_outl(*sp++, port); -} - -/* - * Unfortunately, some platforms are broken and do not follow the IA-64 architecture - * specification regarding legacy I/O support. Thus, we have to make these operations - * platform dependent... - */ -#define __inb platform_inb -#define __inw platform_inw -#define __inl platform_inl -#define __outb platform_outb -#define __outw platform_outw -#define __outl platform_outl -#define __mmiowb platform_mmiowb - -#define inb(p) __inb(p) -#define inw(p) __inw(p) -#define inl(p) __inl(p) -#define insb(p,d,c) __insb(p,d,c) -#define insw(p,d,c) __insw(p,d,c) -#define insl(p,d,c) __insl(p,d,c) -#define outb(v,p) __outb(v,p) -#define outw(v,p) __outw(v,p) -#define outl(v,p) __outl(v,p) -#define outsb(p,s,c) __outsb(p,s,c) -#define outsw(p,s,c) __outsw(p,s,c) -#define outsl(p,s,c) __outsl(p,s,c) -#define mmiowb() __mmiowb() - -/* - * The address passed to these functions are ioremap()ped already. - * - * We need these to be machine vectors since some platforms don't provide - * DMA coherence via PIO reads (PCI drivers and the spec imply that this is - * a good idea). Writes are ok though for all existing ia64 platforms (and - * hopefully it'll stay that way). - */ -static inline unsigned char -___ia64_readb (const volatile void __iomem *addr) -{ - return *(volatile unsigned char __force *)addr; -} - -static inline unsigned short -___ia64_readw (const volatile void __iomem *addr) -{ - return *(volatile unsigned short __force *)addr; -} - -static inline unsigned int -___ia64_readl (const volatile void __iomem *addr) -{ - return *(volatile unsigned int __force *) addr; -} - -static inline unsigned long -___ia64_readq (const volatile void __iomem *addr) -{ - return *(volatile unsigned long __force *) addr; -} - -static inline void -__writeb (unsigned char val, volatile void __iomem *addr) -{ - *(volatile unsigned char __force *) addr = val; -} - -static inline void -__writew (unsigned short val, volatile void __iomem *addr) -{ - *(volatile unsigned short __force *) addr = val; -} - -static inline void -__writel (unsigned int val, volatile void __iomem *addr) -{ - *(volatile unsigned int __force *) addr = val; -} - -static inline void -__writeq (unsigned long val, volatile void __iomem *addr) -{ - *(volatile unsigned long __force *) addr = val; -} - -#define __readb platform_readb -#define __readw platform_readw -#define __readl platform_readl -#define __readq platform_readq -#define __readb_relaxed platform_readb_relaxed -#define __readw_relaxed platform_readw_relaxed -#define __readl_relaxed platform_readl_relaxed -#define __readq_relaxed platform_readq_relaxed - -#define readb(a) __readb((a)) -#define readw(a) __readw((a)) -#define readl(a) __readl((a)) -#define readq(a) __readq((a)) -#define readb_relaxed(a) __readb_relaxed((a)) -#define readw_relaxed(a) __readw_relaxed((a)) -#define readl_relaxed(a) __readl_relaxed((a)) -#define readq_relaxed(a) __readq_relaxed((a)) -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl -#define __raw_readq readq -#define __raw_readb_relaxed readb_relaxed -#define __raw_readw_relaxed readw_relaxed -#define __raw_readl_relaxed readl_relaxed -#define __raw_readq_relaxed readq_relaxed -#define writeb(v,a) __writeb((v), (a)) -#define writew(v,a) __writew((v), (a)) -#define writel(v,a) __writel((v), (a)) -#define writeq(v,a) __writeq((v), (a)) -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel -#define __raw_writeq writeq - -#ifndef inb_p -# define inb_p inb -#endif -#ifndef inw_p -# define inw_p inw -#endif -#ifndef inl_p -# define inl_p inl -#endif - -#ifndef outb_p -# define outb_p outb -#endif -#ifndef outw_p -# define outw_p outw -#endif -#ifndef outl_p -# define outl_p outl -#endif - -# ifdef __KERNEL__ - -extern void __iomem * ioremap(unsigned long offset, unsigned long size); -extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size); -extern void iounmap (volatile void __iomem *addr); - -/* - * String version of IO memory access ops: - */ -extern void memcpy_fromio(void *dst, const volatile void __iomem *src, long n); -extern void memcpy_toio(volatile void __iomem *dst, const void *src, long n); -extern void memset_io(volatile void __iomem *s, int c, long n); - -# endif /* __KERNEL__ */ - -/* - * Enabling BIO_VMERGE_BOUNDARY forces us to turn off I/O MMU bypassing. It is said that - * BIO-level virtual merging can give up to 4% performance boost (not verified for ia64). - * On the other hand, we know that I/O MMU bypassing gives ~8% performance improvement on - * SPECweb-like workloads on zx1-based machines. Thus, for now we favor I/O MMU bypassing - * over BIO-level virtual merging. - */ -extern unsigned long ia64_max_iommu_merge_mask; -#if 1 -#define BIO_VMERGE_BOUNDARY 0 -#else -/* - * It makes no sense at all to have this BIO_VMERGE_BOUNDARY macro here. Should be - * replaced by dma_merge_mask() or something of that sort. Note: the only way - * BIO_VMERGE_BOUNDARY is used is to mask off bits. Effectively, our definition gets - * expanded into: - * - * addr & ((ia64_max_iommu_merge_mask + 1) - 1) == (addr & ia64_max_iommu_vmerge_mask) - * - * which is precisely what we want. - */ -#define BIO_VMERGE_BOUNDARY (ia64_max_iommu_merge_mask + 1) -#endif - -#endif /* _ASM_IA64_IO_H */ diff --git a/include/asm-ia64/ioctl.h b/include/asm-ia64/ioctl.h deleted file mode 100644 index b279fe06dfe5..000000000000 --- a/include/asm-ia64/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-ia64/ioctls.h b/include/asm-ia64/ioctls.h deleted file mode 100644 index f41b636a0bf6..000000000000 --- a/include/asm-ia64/ioctls.h +++ /dev/null @@ -1,93 +0,0 @@ -#ifndef _ASM_IA64_IOCTLS_H -#define _ASM_IA64_IOCTLS_H - -/* - * Based on - * - * Modified 1998, 1999, 2002 - * David Mosberger-Tang , Hewlett-Packard Co - */ - -#include - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */ -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T',0x2A, struct termios2) -#define TCSETS2 _IOW('T',0x2B, struct termios2) -#define TCSETSW2 _IOW('T',0x2C, struct termios2) -#define TCSETSF2 _IOW('T',0x2D, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ -#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ -#define FIOQSIZE 0x5460 - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* _ASM_IA64_IOCTLS_H */ diff --git a/include/asm-ia64/iosapic.h b/include/asm-ia64/iosapic.h deleted file mode 100644 index b9c102e15f22..000000000000 --- a/include/asm-ia64/iosapic.h +++ /dev/null @@ -1,126 +0,0 @@ -#ifndef __ASM_IA64_IOSAPIC_H -#define __ASM_IA64_IOSAPIC_H - -#define IOSAPIC_REG_SELECT 0x0 -#define IOSAPIC_WINDOW 0x10 -#define IOSAPIC_EOI 0x40 - -#define IOSAPIC_VERSION 0x1 - -/* - * Redirection table entry - */ -#define IOSAPIC_RTE_LOW(i) (0x10+i*2) -#define IOSAPIC_RTE_HIGH(i) (0x11+i*2) - -#define IOSAPIC_DEST_SHIFT 16 - -/* - * Delivery mode - */ -#define IOSAPIC_DELIVERY_SHIFT 8 -#define IOSAPIC_FIXED 0x0 -#define IOSAPIC_LOWEST_PRIORITY 0x1 -#define IOSAPIC_PMI 0x2 -#define IOSAPIC_NMI 0x4 -#define IOSAPIC_INIT 0x5 -#define IOSAPIC_EXTINT 0x7 - -/* - * Interrupt polarity - */ -#define IOSAPIC_POLARITY_SHIFT 13 -#define IOSAPIC_POL_HIGH 0 -#define IOSAPIC_POL_LOW 1 - -/* - * Trigger mode - */ -#define IOSAPIC_TRIGGER_SHIFT 15 -#define IOSAPIC_EDGE 0 -#define IOSAPIC_LEVEL 1 - -/* - * Mask bit - */ - -#define IOSAPIC_MASK_SHIFT 16 -#define IOSAPIC_MASK (1< -#else -#define iosapic_pcat_compat_init ia64_native_iosapic_pcat_compat_init -#define __iosapic_read __ia64_native_iosapic_read -#define __iosapic_write __ia64_native_iosapic_write -#define iosapic_get_irq_chip ia64_native_iosapic_get_irq_chip -#endif - -extern void __init ia64_native_iosapic_pcat_compat_init(void); -extern struct irq_chip *ia64_native_iosapic_get_irq_chip(unsigned long trigger); - -static inline unsigned int -__ia64_native_iosapic_read(char __iomem *iosapic, unsigned int reg) -{ - writel(reg, iosapic + IOSAPIC_REG_SELECT); - return readl(iosapic + IOSAPIC_WINDOW); -} - -static inline void -__ia64_native_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val) -{ - writel(reg, iosapic + IOSAPIC_REG_SELECT); - writel(val, iosapic + IOSAPIC_WINDOW); -} - -static inline void iosapic_eoi(char __iomem *iosapic, u32 vector) -{ - writel(vector, iosapic + IOSAPIC_EOI); -} - -extern void __init iosapic_system_init (int pcat_compat); -extern int __devinit iosapic_init (unsigned long address, - unsigned int gsi_base); -#ifdef CONFIG_HOTPLUG -extern int iosapic_remove (unsigned int gsi_base); -#else -#define iosapic_remove(gsi_base) (-EINVAL) -#endif /* CONFIG_HOTPLUG */ -extern int gsi_to_irq (unsigned int gsi); -extern int iosapic_register_intr (unsigned int gsi, unsigned long polarity, - unsigned long trigger); -extern void iosapic_unregister_intr (unsigned int irq); -extern void __devinit iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi, - unsigned long polarity, - unsigned long trigger); -extern int __init iosapic_register_platform_intr (u32 int_type, - unsigned int gsi, - int pmi_vector, - u16 eid, u16 id, - unsigned long polarity, - unsigned long trigger); - -#ifdef CONFIG_NUMA -extern void __devinit map_iosapic_to_node (unsigned int, int); -#endif -#else -#define iosapic_system_init(pcat_compat) do { } while (0) -#define iosapic_init(address,gsi_base) (-EINVAL) -#define iosapic_remove(gsi_base) (-ENODEV) -#define iosapic_register_intr(gsi,polarity,trigger) (gsi) -#define iosapic_unregister_intr(irq) do { } while (0) -#define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger) do { } while (0) -#define iosapic_register_platform_intr(type,gsi,pmi,eid,id, \ - polarity,trigger) (gsi) -#endif - -# endif /* !__ASSEMBLY__ */ -#endif /* __ASM_IA64_IOSAPIC_H */ diff --git a/include/asm-ia64/ipcbuf.h b/include/asm-ia64/ipcbuf.h deleted file mode 100644 index 079899ae7d32..000000000000 --- a/include/asm-ia64/ipcbuf.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef _ASM_IA64_IPCBUF_H -#define _ASM_IA64_IPCBUF_H - -/* - * The ipc64_perm structure for IA-64 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit seq - * - 2 miscellaneous 64-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid_t uid; - __kernel_gid_t gid; - __kernel_uid_t cuid; - __kernel_gid_t cgid; - __kernel_mode_t mode; - unsigned short seq; - unsigned short __pad1; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ASM_IA64_IPCBUF_H */ diff --git a/include/asm-ia64/irq.h b/include/asm-ia64/irq.h deleted file mode 100644 index 3627116fb0e2..000000000000 --- a/include/asm-ia64/irq.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef _ASM_IA64_IRQ_H -#define _ASM_IA64_IRQ_H - -/* - * Copyright (C) 1999-2000, 2002 Hewlett-Packard Co - * David Mosberger-Tang - * Stephane Eranian - * - * 11/24/98 S.Eranian updated TIMER_IRQ and irq_canonicalize - * 01/20/99 S.Eranian added keyboard interrupt - * 02/29/00 D.Mosberger moved most things into hw_irq.h - */ - -#include -#include -#include - -static __inline__ int -irq_canonicalize (int irq) -{ - /* - * We do the legacy thing here of pretending that irqs < 16 - * are 8259 irqs. This really shouldn't be necessary at all, - * but we keep it here as serial.c still uses it... - */ - return ((irq == 2) ? 9 : irq); -} - -extern void set_irq_affinity_info (unsigned int irq, int dest, int redir); -bool is_affinity_mask_valid(cpumask_t cpumask); - -#define is_affinity_mask_valid is_affinity_mask_valid - -#endif /* _ASM_IA64_IRQ_H */ diff --git a/include/asm-ia64/irq_regs.h b/include/asm-ia64/irq_regs.h deleted file mode 100644 index 3dd9c0b70270..000000000000 --- a/include/asm-ia64/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-ia64/kdebug.h b/include/asm-ia64/kdebug.h deleted file mode 100644 index 35e49407d06c..000000000000 --- a/include/asm-ia64/kdebug.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef _IA64_KDEBUG_H -#define _IA64_KDEBUG_H 1 -/* - * include/asm-ia64/kdebug.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) Intel Corporation, 2005 - * - * 2005-Apr Rusty Lynch and Anil S Keshavamurthy - * adopted from - * include/asm-x86_64/kdebug.h - * - * 2005-Oct Keith Owens . Expand notify_die to cover more - * events. - */ - -enum die_val { - DIE_BREAK = 1, - DIE_FAULT, - DIE_OOPS, - DIE_MACHINE_HALT, - DIE_MACHINE_RESTART, - DIE_MCA_MONARCH_ENTER, - DIE_MCA_MONARCH_PROCESS, - DIE_MCA_MONARCH_LEAVE, - DIE_MCA_SLAVE_ENTER, - DIE_MCA_SLAVE_PROCESS, - DIE_MCA_SLAVE_LEAVE, - DIE_MCA_RENDZVOUS_ENTER, - DIE_MCA_RENDZVOUS_PROCESS, - DIE_MCA_RENDZVOUS_LEAVE, - DIE_MCA_NEW_TIMEOUT, - DIE_INIT_ENTER, - DIE_INIT_MONARCH_ENTER, - DIE_INIT_MONARCH_PROCESS, - DIE_INIT_MONARCH_LEAVE, - DIE_INIT_SLAVE_ENTER, - DIE_INIT_SLAVE_PROCESS, - DIE_INIT_SLAVE_LEAVE, - DIE_KDEBUG_ENTER, - DIE_KDEBUG_LEAVE, - DIE_KDUMP_ENTER, - DIE_KDUMP_LEAVE, -}; - -#endif diff --git a/include/asm-ia64/kexec.h b/include/asm-ia64/kexec.h deleted file mode 100644 index 541be835fc5a..000000000000 --- a/include/asm-ia64/kexec.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef _ASM_IA64_KEXEC_H -#define _ASM_IA64_KEXEC_H - - -/* Maximum physical address we can use pages from */ -#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) -/* Maximum address we can reach in physical address mode */ -#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) -/* Maximum address we can use for the control code buffer */ -#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE - -#define KEXEC_CONTROL_CODE_SIZE (8192 + 8192 + 4096) - -/* The native architecture */ -#define KEXEC_ARCH KEXEC_ARCH_IA_64 - -#define kexec_flush_icache_page(page) do { \ - unsigned long page_addr = (unsigned long)page_address(page); \ - flush_icache_range(page_addr, page_addr + PAGE_SIZE); \ - } while(0) - -extern struct kimage *ia64_kimage; -extern const unsigned int relocate_new_kernel_size; -extern void relocate_new_kernel(unsigned long, unsigned long, - struct ia64_boot_param *, unsigned long); -static inline void -crash_setup_regs(struct pt_regs *newregs, struct pt_regs *oldregs) -{ -} -extern struct resource efi_memmap_res; -extern struct resource boot_param_res; -extern void kdump_smp_send_stop(void); -extern void kdump_smp_send_init(void); -extern void kexec_disable_iosapic(void); -extern void crash_save_this_cpu(void); -struct rsvd_region; -extern unsigned long kdump_find_rsvd_region(unsigned long size, - struct rsvd_region *rsvd_regions, int n); -extern void kdump_cpu_freeze(struct unw_frame_info *info, void *arg); -extern int kdump_status[]; -extern atomic_t kdump_cpu_freezed; -extern atomic_t kdump_in_progress; - -#endif /* _ASM_IA64_KEXEC_H */ diff --git a/include/asm-ia64/kmap_types.h b/include/asm-ia64/kmap_types.h deleted file mode 100644 index 5d1658aa2b3b..000000000000 --- a/include/asm-ia64/kmap_types.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef _ASM_IA64_KMAP_TYPES_H -#define _ASM_IA64_KMAP_TYPES_H - - -#ifdef CONFIG_DEBUG_HIGHMEM -# define D(n) __KM_FENCE_##n , -#else -# define D(n) -#endif - -enum km_type { -D(0) KM_BOUNCE_READ, -D(1) KM_SKB_SUNRPC_DATA, -D(2) KM_SKB_DATA_SOFTIRQ, -D(3) KM_USER0, -D(4) KM_USER1, -D(5) KM_BIO_SRC_IRQ, -D(6) KM_BIO_DST_IRQ, -D(7) KM_PTE0, -D(8) KM_PTE1, -D(9) KM_IRQ0, -D(10) KM_IRQ1, -D(11) KM_SOFTIRQ0, -D(12) KM_SOFTIRQ1, -D(13) KM_TYPE_NR -}; - -#undef D - -#endif /* _ASM_IA64_KMAP_TYPES_H */ diff --git a/include/asm-ia64/kprobes.h b/include/asm-ia64/kprobes.h deleted file mode 100644 index ef71b57fc2f4..000000000000 --- a/include/asm-ia64/kprobes.h +++ /dev/null @@ -1,133 +0,0 @@ -#ifndef _ASM_KPROBES_H -#define _ASM_KPROBES_H -/* - * Kernel Probes (KProbes) - * include/asm-ia64/kprobes.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) IBM Corporation, 2002, 2004 - * Copyright (C) Intel Corporation, 2005 - * - * 2005-Apr Rusty Lynch and Anil S Keshavamurthy - * adapted from i386 - */ -#include -#include -#include -#include - -#define __ARCH_WANT_KPROBES_INSN_SLOT -#define MAX_INSN_SIZE 2 /* last half is for kprobe-booster */ -#define BREAK_INST (long)(__IA64_BREAK_KPROBE << 6) -#define NOP_M_INST (long)(1<<27) -#define BRL_INST(i1, i2) ((long)((0xcL << 37) | /* brl */ \ - (0x1L << 12) | /* many */ \ - (((i1) & 1) << 36) | ((i2) << 13))) /* imm */ - -typedef union cmp_inst { - struct { - unsigned long long qp : 6; - unsigned long long p1 : 6; - unsigned long long c : 1; - unsigned long long r2 : 7; - unsigned long long r3 : 7; - unsigned long long p2 : 6; - unsigned long long ta : 1; - unsigned long long x2 : 2; - unsigned long long tb : 1; - unsigned long long opcode : 4; - unsigned long long reserved : 23; - }f; - unsigned long long l; -} cmp_inst_t; - -struct kprobe; - -typedef struct _bundle { - struct { - unsigned long long template : 5; - unsigned long long slot0 : 41; - unsigned long long slot1_p0 : 64-46; - } quad0; - struct { - unsigned long long slot1_p1 : 41 - (64-46); - unsigned long long slot2 : 41; - } quad1; -} __attribute__((__aligned__(16))) bundle_t; - -struct prev_kprobe { - struct kprobe *kp; - unsigned long status; -}; - -#define MAX_PARAM_RSE_SIZE (0x60+0x60/0x3f) -/* per-cpu kprobe control block */ -#define ARCH_PREV_KPROBE_SZ 2 -struct kprobe_ctlblk { - unsigned long kprobe_status; - struct pt_regs jprobe_saved_regs; - unsigned long jprobes_saved_stacked_regs[MAX_PARAM_RSE_SIZE]; - unsigned long *bsp; - unsigned long cfm; - atomic_t prev_kprobe_index; - struct prev_kprobe prev_kprobe[ARCH_PREV_KPROBE_SZ]; -}; - -#define kretprobe_blacklist_size 0 - -#define SLOT0_OPCODE_SHIFT (37) -#define SLOT1_p1_OPCODE_SHIFT (37 - (64-46)) -#define SLOT2_OPCODE_SHIFT (37) - -#define INDIRECT_CALL_OPCODE (1) -#define IP_RELATIVE_CALL_OPCODE (5) -#define IP_RELATIVE_BRANCH_OPCODE (4) -#define IP_RELATIVE_PREDICT_OPCODE (7) -#define LONG_BRANCH_OPCODE (0xC) -#define LONG_CALL_OPCODE (0xD) -#define flush_insn_slot(p) do { } while (0) - -typedef struct kprobe_opcode { - bundle_t bundle; -} kprobe_opcode_t; - -struct fnptr { - unsigned long ip; - unsigned long gp; -}; - -/* Architecture specific copy of original instruction*/ -struct arch_specific_insn { - /* copy of the instruction to be emulated */ - kprobe_opcode_t *insn; - #define INST_FLAG_FIX_RELATIVE_IP_ADDR 1 - #define INST_FLAG_FIX_BRANCH_REG 2 - #define INST_FLAG_BREAK_INST 4 - #define INST_FLAG_BOOSTABLE 8 - unsigned long inst_flag; - unsigned short target_br_reg; - unsigned short slot; -}; - -extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr); -extern int kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data); - -extern void invalidate_stacked_regs(void); -extern void flush_register_stack(void); -extern void arch_remove_kprobe(struct kprobe *p); - -#endif /* _ASM_KPROBES_H */ diff --git a/include/asm-ia64/kregs.h b/include/asm-ia64/kregs.h deleted file mode 100644 index aefcdfee7f23..000000000000 --- a/include/asm-ia64/kregs.h +++ /dev/null @@ -1,165 +0,0 @@ -#ifndef _ASM_IA64_KREGS_H -#define _ASM_IA64_KREGS_H - -/* - * Copyright (C) 2001-2002 Hewlett-Packard Co - * David Mosberger-Tang - */ -/* - * This file defines the kernel register usage convention used by Linux/ia64. - */ - -/* - * Kernel registers: - */ -#define IA64_KR_IO_BASE 0 /* ar.k0: legacy I/O base address */ -#define IA64_KR_TSSD 1 /* ar.k1: IVE uses this as the TSSD */ -#define IA64_KR_PER_CPU_DATA 3 /* ar.k3: physical per-CPU base */ -#define IA64_KR_CURRENT_STACK 4 /* ar.k4: what's mapped in IA64_TR_CURRENT_STACK */ -#define IA64_KR_FPU_OWNER 5 /* ar.k5: fpu-owner (UP only, at the moment) */ -#define IA64_KR_CURRENT 6 /* ar.k6: "current" task pointer */ -#define IA64_KR_PT_BASE 7 /* ar.k7: page table base address (physical) */ - -#define _IA64_KR_PASTE(x,y) x##y -#define _IA64_KR_PREFIX(n) _IA64_KR_PASTE(ar.k, n) -#define IA64_KR(n) _IA64_KR_PREFIX(IA64_KR_##n) - -/* - * Translation registers: - */ -#define IA64_TR_KERNEL 0 /* itr0, dtr0: maps kernel image (code & data) */ -#define IA64_TR_PALCODE 1 /* itr1: maps PALcode as required by EFI */ -#define IA64_TR_CURRENT_STACK 1 /* dtr1: maps kernel's memory- & register-stacks */ - -#define IA64_TR_ALLOC_BASE 2 /* itr&dtr: Base of dynamic TR resource*/ -#define IA64_TR_ALLOC_MAX 32 /* Max number for dynamic use*/ - -/* Processor status register bits: */ -#define IA64_PSR_BE_BIT 1 -#define IA64_PSR_UP_BIT 2 -#define IA64_PSR_AC_BIT 3 -#define IA64_PSR_MFL_BIT 4 -#define IA64_PSR_MFH_BIT 5 -#define IA64_PSR_IC_BIT 13 -#define IA64_PSR_I_BIT 14 -#define IA64_PSR_PK_BIT 15 -#define IA64_PSR_DT_BIT 17 -#define IA64_PSR_DFL_BIT 18 -#define IA64_PSR_DFH_BIT 19 -#define IA64_PSR_SP_BIT 20 -#define IA64_PSR_PP_BIT 21 -#define IA64_PSR_DI_BIT 22 -#define IA64_PSR_SI_BIT 23 -#define IA64_PSR_DB_BIT 24 -#define IA64_PSR_LP_BIT 25 -#define IA64_PSR_TB_BIT 26 -#define IA64_PSR_RT_BIT 27 -/* The following are not affected by save_flags()/restore_flags(): */ -#define IA64_PSR_CPL0_BIT 32 -#define IA64_PSR_CPL1_BIT 33 -#define IA64_PSR_IS_BIT 34 -#define IA64_PSR_MC_BIT 35 -#define IA64_PSR_IT_BIT 36 -#define IA64_PSR_ID_BIT 37 -#define IA64_PSR_DA_BIT 38 -#define IA64_PSR_DD_BIT 39 -#define IA64_PSR_SS_BIT 40 -#define IA64_PSR_RI_BIT 41 -#define IA64_PSR_ED_BIT 43 -#define IA64_PSR_BN_BIT 44 -#define IA64_PSR_IA_BIT 45 - -/* A mask of PSR bits that we generally don't want to inherit across a clone2() or an - execve(). Only list flags here that need to be cleared/set for BOTH clone2() and - execve(). */ -#define IA64_PSR_BITS_TO_CLEAR (IA64_PSR_MFL | IA64_PSR_MFH | IA64_PSR_DB | IA64_PSR_LP | \ - IA64_PSR_TB | IA64_PSR_ID | IA64_PSR_DA | IA64_PSR_DD | \ - IA64_PSR_SS | IA64_PSR_ED | IA64_PSR_IA) -#define IA64_PSR_BITS_TO_SET (IA64_PSR_DFH | IA64_PSR_SP) - -#define IA64_PSR_BE (__IA64_UL(1) << IA64_PSR_BE_BIT) -#define IA64_PSR_UP (__IA64_UL(1) << IA64_PSR_UP_BIT) -#define IA64_PSR_AC (__IA64_UL(1) << IA64_PSR_AC_BIT) -#define IA64_PSR_MFL (__IA64_UL(1) << IA64_PSR_MFL_BIT) -#define IA64_PSR_MFH (__IA64_UL(1) << IA64_PSR_MFH_BIT) -#define IA64_PSR_IC (__IA64_UL(1) << IA64_PSR_IC_BIT) -#define IA64_PSR_I (__IA64_UL(1) << IA64_PSR_I_BIT) -#define IA64_PSR_PK (__IA64_UL(1) << IA64_PSR_PK_BIT) -#define IA64_PSR_DT (__IA64_UL(1) << IA64_PSR_DT_BIT) -#define IA64_PSR_DFL (__IA64_UL(1) << IA64_PSR_DFL_BIT) -#define IA64_PSR_DFH (__IA64_UL(1) << IA64_PSR_DFH_BIT) -#define IA64_PSR_SP (__IA64_UL(1) << IA64_PSR_SP_BIT) -#define IA64_PSR_PP (__IA64_UL(1) << IA64_PSR_PP_BIT) -#define IA64_PSR_DI (__IA64_UL(1) << IA64_PSR_DI_BIT) -#define IA64_PSR_SI (__IA64_UL(1) << IA64_PSR_SI_BIT) -#define IA64_PSR_DB (__IA64_UL(1) << IA64_PSR_DB_BIT) -#define IA64_PSR_LP (__IA64_UL(1) << IA64_PSR_LP_BIT) -#define IA64_PSR_TB (__IA64_UL(1) << IA64_PSR_TB_BIT) -#define IA64_PSR_RT (__IA64_UL(1) << IA64_PSR_RT_BIT) -/* The following are not affected by save_flags()/restore_flags(): */ -#define IA64_PSR_CPL (__IA64_UL(3) << IA64_PSR_CPL0_BIT) -#define IA64_PSR_IS (__IA64_UL(1) << IA64_PSR_IS_BIT) -#define IA64_PSR_MC (__IA64_UL(1) << IA64_PSR_MC_BIT) -#define IA64_PSR_IT (__IA64_UL(1) << IA64_PSR_IT_BIT) -#define IA64_PSR_ID (__IA64_UL(1) << IA64_PSR_ID_BIT) -#define IA64_PSR_DA (__IA64_UL(1) << IA64_PSR_DA_BIT) -#define IA64_PSR_DD (__IA64_UL(1) << IA64_PSR_DD_BIT) -#define IA64_PSR_SS (__IA64_UL(1) << IA64_PSR_SS_BIT) -#define IA64_PSR_RI (__IA64_UL(3) << IA64_PSR_RI_BIT) -#define IA64_PSR_ED (__IA64_UL(1) << IA64_PSR_ED_BIT) -#define IA64_PSR_BN (__IA64_UL(1) << IA64_PSR_BN_BIT) -#define IA64_PSR_IA (__IA64_UL(1) << IA64_PSR_IA_BIT) - -/* User mask bits: */ -#define IA64_PSR_UM (IA64_PSR_BE | IA64_PSR_UP | IA64_PSR_AC | IA64_PSR_MFL | IA64_PSR_MFH) - -/* Default Control Register */ -#define IA64_DCR_PP_BIT 0 /* privileged performance monitor default */ -#define IA64_DCR_BE_BIT 1 /* big-endian default */ -#define IA64_DCR_LC_BIT 2 /* ia32 lock-check enable */ -#define IA64_DCR_DM_BIT 8 /* defer TLB miss faults */ -#define IA64_DCR_DP_BIT 9 /* defer page-not-present faults */ -#define IA64_DCR_DK_BIT 10 /* defer key miss faults */ -#define IA64_DCR_DX_BIT 11 /* defer key permission faults */ -#define IA64_DCR_DR_BIT 12 /* defer access right faults */ -#define IA64_DCR_DA_BIT 13 /* defer access bit faults */ -#define IA64_DCR_DD_BIT 14 /* defer debug faults */ - -#define IA64_DCR_PP (__IA64_UL(1) << IA64_DCR_PP_BIT) -#define IA64_DCR_BE (__IA64_UL(1) << IA64_DCR_BE_BIT) -#define IA64_DCR_LC (__IA64_UL(1) << IA64_DCR_LC_BIT) -#define IA64_DCR_DM (__IA64_UL(1) << IA64_DCR_DM_BIT) -#define IA64_DCR_DP (__IA64_UL(1) << IA64_DCR_DP_BIT) -#define IA64_DCR_DK (__IA64_UL(1) << IA64_DCR_DK_BIT) -#define IA64_DCR_DX (__IA64_UL(1) << IA64_DCR_DX_BIT) -#define IA64_DCR_DR (__IA64_UL(1) << IA64_DCR_DR_BIT) -#define IA64_DCR_DA (__IA64_UL(1) << IA64_DCR_DA_BIT) -#define IA64_DCR_DD (__IA64_UL(1) << IA64_DCR_DD_BIT) - -/* Interrupt Status Register */ -#define IA64_ISR_X_BIT 32 /* execute access */ -#define IA64_ISR_W_BIT 33 /* write access */ -#define IA64_ISR_R_BIT 34 /* read access */ -#define IA64_ISR_NA_BIT 35 /* non-access */ -#define IA64_ISR_SP_BIT 36 /* speculative load exception */ -#define IA64_ISR_RS_BIT 37 /* mandatory register-stack exception */ -#define IA64_ISR_IR_BIT 38 /* invalid register frame exception */ -#define IA64_ISR_CODE_MASK 0xf - -#define IA64_ISR_X (__IA64_UL(1) << IA64_ISR_X_BIT) -#define IA64_ISR_W (__IA64_UL(1) << IA64_ISR_W_BIT) -#define IA64_ISR_R (__IA64_UL(1) << IA64_ISR_R_BIT) -#define IA64_ISR_NA (__IA64_UL(1) << IA64_ISR_NA_BIT) -#define IA64_ISR_SP (__IA64_UL(1) << IA64_ISR_SP_BIT) -#define IA64_ISR_RS (__IA64_UL(1) << IA64_ISR_RS_BIT) -#define IA64_ISR_IR (__IA64_UL(1) << IA64_ISR_IR_BIT) - -/* ISR code field for non-access instructions */ -#define IA64_ISR_CODE_TPA 0 -#define IA64_ISR_CODE_FC 1 -#define IA64_ISR_CODE_PROBE 2 -#define IA64_ISR_CODE_TAK 3 -#define IA64_ISR_CODE_LFETCH 4 -#define IA64_ISR_CODE_PROBEF 5 - -#endif /* _ASM_IA64_kREGS_H */ diff --git a/include/asm-ia64/kvm.h b/include/asm-ia64/kvm.h deleted file mode 100644 index 3f6a090cbd9a..000000000000 --- a/include/asm-ia64/kvm.h +++ /dev/null @@ -1,211 +0,0 @@ -#ifndef __ASM_IA64_KVM_H -#define __ASM_IA64_KVM_H - -/* - * asm-ia64/kvm.h: kvm structure definitions for ia64 - * - * Copyright (C) 2007 Xiantao Zhang - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * - */ - -#include - -#include - -/* Architectural interrupt line count. */ -#define KVM_NR_INTERRUPTS 256 - -#define KVM_IOAPIC_NUM_PINS 48 - -struct kvm_ioapic_state { - __u64 base_address; - __u32 ioregsel; - __u32 id; - __u32 irr; - __u32 pad; - union { - __u64 bits; - struct { - __u8 vector; - __u8 delivery_mode:3; - __u8 dest_mode:1; - __u8 delivery_status:1; - __u8 polarity:1; - __u8 remote_irr:1; - __u8 trig_mode:1; - __u8 mask:1; - __u8 reserve:7; - __u8 reserved[4]; - __u8 dest_id; - } fields; - } redirtbl[KVM_IOAPIC_NUM_PINS]; -}; - -#define KVM_IRQCHIP_PIC_MASTER 0 -#define KVM_IRQCHIP_PIC_SLAVE 1 -#define KVM_IRQCHIP_IOAPIC 2 - -#define KVM_CONTEXT_SIZE 8*1024 - -struct kvm_fpreg { - union { - unsigned long bits[2]; - long double __dummy; /* force 16-byte alignment */ - } u; -}; - -union context { - /* 8K size */ - char dummy[KVM_CONTEXT_SIZE]; - struct { - unsigned long psr; - unsigned long pr; - unsigned long caller_unat; - unsigned long pad; - unsigned long gr[32]; - unsigned long ar[128]; - unsigned long br[8]; - unsigned long cr[128]; - unsigned long rr[8]; - unsigned long ibr[8]; - unsigned long dbr[8]; - unsigned long pkr[8]; - struct kvm_fpreg fr[128]; - }; -}; - -struct thash_data { - union { - struct { - unsigned long p : 1; /* 0 */ - unsigned long rv1 : 1; /* 1 */ - unsigned long ma : 3; /* 2-4 */ - unsigned long a : 1; /* 5 */ - unsigned long d : 1; /* 6 */ - unsigned long pl : 2; /* 7-8 */ - unsigned long ar : 3; /* 9-11 */ - unsigned long ppn : 38; /* 12-49 */ - unsigned long rv2 : 2; /* 50-51 */ - unsigned long ed : 1; /* 52 */ - unsigned long ig1 : 11; /* 53-63 */ - }; - struct { - unsigned long __rv1 : 53; /* 0-52 */ - unsigned long contiguous : 1; /*53 */ - unsigned long tc : 1; /* 54 TR or TC */ - unsigned long cl : 1; - /* 55 I side or D side cache line */ - unsigned long len : 4; /* 56-59 */ - unsigned long io : 1; /* 60 entry is for io or not */ - unsigned long nomap : 1; - /* 61 entry cann't be inserted into machine TLB.*/ - unsigned long checked : 1; - /* 62 for VTLB/VHPT sanity check */ - unsigned long invalid : 1; - /* 63 invalid entry */ - }; - unsigned long page_flags; - }; /* same for VHPT and TLB */ - - union { - struct { - unsigned long rv3 : 2; - unsigned long ps : 6; - unsigned long key : 24; - unsigned long rv4 : 32; - }; - unsigned long itir; - }; - union { - struct { - unsigned long ig2 : 12; - unsigned long vpn : 49; - unsigned long vrn : 3; - }; - unsigned long ifa; - unsigned long vadr; - struct { - unsigned long tag : 63; - unsigned long ti : 1; - }; - unsigned long etag; - }; - union { - struct thash_data *next; - unsigned long rid; - unsigned long gpaddr; - }; -}; - -#define NITRS 8 -#define NDTRS 8 - -struct saved_vpd { - unsigned long vhpi; - unsigned long vgr[16]; - unsigned long vbgr[16]; - unsigned long vnat; - unsigned long vbnat; - unsigned long vcpuid[5]; - unsigned long vpsr; - unsigned long vpr; - unsigned long vcr[128]; -}; - -struct kvm_regs { - char *saved_guest; - char *saved_stack; - struct saved_vpd vpd; - /*Arch-regs*/ - int mp_state; - unsigned long vmm_rr; - /* TR and TC. */ - struct thash_data itrs[NITRS]; - struct thash_data dtrs[NDTRS]; - /* Bit is set if there is a tr/tc for the region. */ - unsigned char itr_regions; - unsigned char dtr_regions; - unsigned char tc_regions; - - char irq_check; - unsigned long saved_itc; - unsigned long itc_check; - unsigned long timer_check; - unsigned long timer_pending; - unsigned long last_itc; - - unsigned long vrr[8]; - unsigned long ibr[8]; - unsigned long dbr[8]; - unsigned long insvc[4]; /* Interrupt in service. */ - unsigned long xtp; - - unsigned long metaphysical_rr0; /* from kvm_arch (so is pinned) */ - unsigned long metaphysical_rr4; /* from kvm_arch (so is pinned) */ - unsigned long metaphysical_saved_rr0; /* from kvm_arch */ - unsigned long metaphysical_saved_rr4; /* from kvm_arch */ - unsigned long fp_psr; /*used for lazy float register */ - unsigned long saved_gp; - /*for phycial emulation */ -}; - -struct kvm_sregs { -}; - -struct kvm_fpu { -}; - -#endif diff --git a/include/asm-ia64/kvm_host.h b/include/asm-ia64/kvm_host.h deleted file mode 100644 index 1efe513a9941..000000000000 --- a/include/asm-ia64/kvm_host.h +++ /dev/null @@ -1,527 +0,0 @@ -/* - * kvm_host.h: used for kvm module, and hold ia64-specific sections. - * - * Copyright (C) 2007, Intel Corporation. - * - * Xiantao Zhang - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * - */ - -#ifndef __ASM_KVM_HOST_H -#define __ASM_KVM_HOST_H - - -#include -#include -#include -#include -#include - -#include -#include - -#define KVM_MAX_VCPUS 4 -#define KVM_MEMORY_SLOTS 32 -/* memory slots that does not exposed to userspace */ -#define KVM_PRIVATE_MEM_SLOTS 4 - -#define KVM_COALESCED_MMIO_PAGE_OFFSET 1 - -/* define exit reasons from vmm to kvm*/ -#define EXIT_REASON_VM_PANIC 0 -#define EXIT_REASON_MMIO_INSTRUCTION 1 -#define EXIT_REASON_PAL_CALL 2 -#define EXIT_REASON_SAL_CALL 3 -#define EXIT_REASON_SWITCH_RR6 4 -#define EXIT_REASON_VM_DESTROY 5 -#define EXIT_REASON_EXTERNAL_INTERRUPT 6 -#define EXIT_REASON_IPI 7 -#define EXIT_REASON_PTC_G 8 - -/*Define vmm address space and vm data space.*/ -#define KVM_VMM_SIZE (16UL<<20) -#define KVM_VMM_SHIFT 24 -#define KVM_VMM_BASE 0xD000000000000000UL -#define VMM_SIZE (8UL<<20) - -/* - * Define vm_buffer, used by PAL Services, base address. - * Note: vmbuffer is in the VMM-BLOCK, the size must be < 8M - */ -#define KVM_VM_BUFFER_BASE (KVM_VMM_BASE + VMM_SIZE) -#define KVM_VM_BUFFER_SIZE (8UL<<20) - -/*Define Virtual machine data layout.*/ -#define KVM_VM_DATA_SHIFT 24 -#define KVM_VM_DATA_SIZE (1UL << KVM_VM_DATA_SHIFT) -#define KVM_VM_DATA_BASE (KVM_VMM_BASE + KVM_VMM_SIZE) - - -#define KVM_P2M_BASE KVM_VM_DATA_BASE -#define KVM_P2M_OFS 0 -#define KVM_P2M_SIZE (8UL << 20) - -#define KVM_VHPT_BASE (KVM_P2M_BASE + KVM_P2M_SIZE) -#define KVM_VHPT_OFS KVM_P2M_SIZE -#define KVM_VHPT_BLOCK_SIZE (2UL << 20) -#define VHPT_SHIFT 18 -#define VHPT_SIZE (1UL << VHPT_SHIFT) -#define VHPT_NUM_ENTRIES (1<<(VHPT_SHIFT-5)) - -#define KVM_VTLB_BASE (KVM_VHPT_BASE+KVM_VHPT_BLOCK_SIZE) -#define KVM_VTLB_OFS (KVM_VHPT_OFS+KVM_VHPT_BLOCK_SIZE) -#define KVM_VTLB_BLOCK_SIZE (1UL<<20) -#define VTLB_SHIFT 17 -#define VTLB_SIZE (1UL<vcpu_id) << 24) - -/* - *Delivery mode - */ -#define SAPIC_DELIV_SHIFT 8 -#define SAPIC_FIXED 0x0 -#define SAPIC_LOWEST_PRIORITY 0x1 -#define SAPIC_PMI 0x2 -#define SAPIC_NMI 0x4 -#define SAPIC_INIT 0x5 -#define SAPIC_EXTINT 0x7 - -/* - * vcpu->requests bit members for arch - */ -#define KVM_REQ_PTC_G 32 -#define KVM_REQ_RESUME 33 - -#define KVM_PAGES_PER_HPAGE 1 - -struct kvm; -struct kvm_vcpu; -struct kvm_guest_debug{ -}; - -struct kvm_mmio_req { - uint64_t addr; /* physical address */ - uint64_t size; /* size in bytes */ - uint64_t data; /* data (or paddr of data) */ - uint8_t state:4; - uint8_t dir:1; /* 1=read, 0=write */ -}; - -/*Pal data struct */ -struct kvm_pal_call{ - /*In area*/ - uint64_t gr28; - uint64_t gr29; - uint64_t gr30; - uint64_t gr31; - /*Out area*/ - struct ia64_pal_retval ret; -}; - -/* Sal data structure */ -struct kvm_sal_call{ - /*In area*/ - uint64_t in0; - uint64_t in1; - uint64_t in2; - uint64_t in3; - uint64_t in4; - uint64_t in5; - uint64_t in6; - uint64_t in7; - struct sal_ret_values ret; -}; - -/*Guest change rr6*/ -struct kvm_switch_rr6 { - uint64_t old_rr; - uint64_t new_rr; -}; - -union ia64_ipi_a{ - unsigned long val; - struct { - unsigned long rv : 3; - unsigned long ir : 1; - unsigned long eid : 8; - unsigned long id : 8; - unsigned long ib_base : 44; - }; -}; - -union ia64_ipi_d { - unsigned long val; - struct { - unsigned long vector : 8; - unsigned long dm : 3; - unsigned long ig : 53; - }; -}; - -/*ipi check exit data*/ -struct kvm_ipi_data{ - union ia64_ipi_a addr; - union ia64_ipi_d data; -}; - -/*global purge data*/ -struct kvm_ptc_g { - unsigned long vaddr; - unsigned long rr; - unsigned long ps; - struct kvm_vcpu *vcpu; -}; - -/*Exit control data */ -struct exit_ctl_data{ - uint32_t exit_reason; - uint32_t vm_status; - union { - struct kvm_mmio_req ioreq; - struct kvm_pal_call pal_data; - struct kvm_sal_call sal_data; - struct kvm_switch_rr6 rr_data; - struct kvm_ipi_data ipi_data; - struct kvm_ptc_g ptc_g_data; - } u; -}; - -union pte_flags { - unsigned long val; - struct { - unsigned long p : 1; /*0 */ - unsigned long : 1; /* 1 */ - unsigned long ma : 3; /* 2-4 */ - unsigned long a : 1; /* 5 */ - unsigned long d : 1; /* 6 */ - unsigned long pl : 2; /* 7-8 */ - unsigned long ar : 3; /* 9-11 */ - unsigned long ppn : 38; /* 12-49 */ - unsigned long : 2; /* 50-51 */ - unsigned long ed : 1; /* 52 */ - }; -}; - -union ia64_pta { - unsigned long val; - struct { - unsigned long ve : 1; - unsigned long reserved0 : 1; - unsigned long size : 6; - unsigned long vf : 1; - unsigned long reserved1 : 6; - unsigned long base : 49; - }; -}; - -struct thash_cb { - /* THASH base information */ - struct thash_data *hash; /* hash table pointer */ - union ia64_pta pta; - int num; -}; - -struct kvm_vcpu_stat { -}; - -struct kvm_vcpu_arch { - int launched; - int last_exit; - int last_run_cpu; - int vmm_tr_slot; - int vm_tr_slot; - -#define KVM_MP_STATE_RUNNABLE 0 -#define KVM_MP_STATE_UNINITIALIZED 1 -#define KVM_MP_STATE_INIT_RECEIVED 2 -#define KVM_MP_STATE_HALTED 3 - int mp_state; - -#define MAX_PTC_G_NUM 3 - int ptc_g_count; - struct kvm_ptc_g ptc_g_data[MAX_PTC_G_NUM]; - - /*halt timer to wake up sleepy vcpus*/ - struct hrtimer hlt_timer; - long ht_active; - - struct kvm_lapic *apic; /* kernel irqchip context */ - struct vpd *vpd; - - /* Exit data for vmm_transition*/ - struct exit_ctl_data exit_data; - - cpumask_t cache_coherent_map; - - unsigned long vmm_rr; - unsigned long host_rr6; - unsigned long psbits[8]; - unsigned long cr_iipa; - unsigned long cr_isr; - unsigned long vsa_base; - unsigned long dirty_log_lock_pa; - unsigned long __gp; - /* TR and TC. */ - struct thash_data itrs[NITRS]; - struct thash_data dtrs[NDTRS]; - /* Bit is set if there is a tr/tc for the region. */ - unsigned char itr_regions; - unsigned char dtr_regions; - unsigned char tc_regions; - /* purge all */ - unsigned long ptce_base; - unsigned long ptce_count[2]; - unsigned long ptce_stride[2]; - /* itc/itm */ - unsigned long last_itc; - long itc_offset; - unsigned long itc_check; - unsigned long timer_check; - unsigned long timer_pending; - - unsigned long vrr[8]; - unsigned long ibr[8]; - unsigned long dbr[8]; - unsigned long insvc[4]; /* Interrupt in service. */ - unsigned long xtp; - - unsigned long metaphysical_rr0; /* from kvm_arch (so is pinned) */ - unsigned long metaphysical_rr4; /* from kvm_arch (so is pinned) */ - unsigned long metaphysical_saved_rr0; /* from kvm_arch */ - unsigned long metaphysical_saved_rr4; /* from kvm_arch */ - unsigned long fp_psr; /*used for lazy float register */ - unsigned long saved_gp; - /*for phycial emulation */ - int mode_flags; - struct thash_cb vtlb; - struct thash_cb vhpt; - char irq_check; - char irq_new_pending; - - unsigned long opcode; - unsigned long cause; - union context host; - union context guest; -}; - -struct kvm_vm_stat { - u64 remote_tlb_flush; -}; - -struct kvm_sal_data { - unsigned long boot_ip; - unsigned long boot_gp; -}; - -struct kvm_arch { - unsigned long vm_base; - unsigned long metaphysical_rr0; - unsigned long metaphysical_rr4; - unsigned long vmm_init_rr; - unsigned long vhpt_base; - unsigned long vtlb_base; - unsigned long vpd_base; - spinlock_t dirty_log_lock; - struct kvm_ioapic *vioapic; - struct kvm_vm_stat stat; - struct kvm_sal_data rdv_sal_data; -}; - -union cpuid3_t { - u64 value; - struct { - u64 number : 8; - u64 revision : 8; - u64 model : 8; - u64 family : 8; - u64 archrev : 8; - u64 rv : 24; - }; -}; - -struct kvm_pt_regs { - /* The following registers are saved by SAVE_MIN: */ - unsigned long b6; /* scratch */ - unsigned long b7; /* scratch */ - - unsigned long ar_csd; /* used by cmp8xchg16 (scratch) */ - unsigned long ar_ssd; /* reserved for future use (scratch) */ - - unsigned long r8; /* scratch (return value register 0) */ - unsigned long r9; /* scratch (return value register 1) */ - unsigned long r10; /* scratch (return value register 2) */ - unsigned long r11; /* scratch (return value register 3) */ - - unsigned long cr_ipsr; /* interrupted task's psr */ - unsigned long cr_iip; /* interrupted task's instruction pointer */ - unsigned long cr_ifs; /* interrupted task's function state */ - - unsigned long ar_unat; /* interrupted task's NaT register (preserved) */ - unsigned long ar_pfs; /* prev function state */ - unsigned long ar_rsc; /* RSE configuration */ - /* The following two are valid only if cr_ipsr.cpl > 0: */ - unsigned long ar_rnat; /* RSE NaT */ - unsigned long ar_bspstore; /* RSE bspstore */ - - unsigned long pr; /* 64 predicate registers (1 bit each) */ - unsigned long b0; /* return pointer (bp) */ - unsigned long loadrs; /* size of dirty partition << 16 */ - - unsigned long r1; /* the gp pointer */ - unsigned long r12; /* interrupted task's memory stack pointer */ - unsigned long r13; /* thread pointer */ - - unsigned long ar_fpsr; /* floating point status (preserved) */ - unsigned long r15; /* scratch */ - - /* The remaining registers are NOT saved for system calls. */ - unsigned long r14; /* scratch */ - unsigned long r2; /* scratch */ - unsigned long r3; /* scratch */ - unsigned long r16; /* scratch */ - unsigned long r17; /* scratch */ - unsigned long r18; /* scratch */ - unsigned long r19; /* scratch */ - unsigned long r20; /* scratch */ - unsigned long r21; /* scratch */ - unsigned long r22; /* scratch */ - unsigned long r23; /* scratch */ - unsigned long r24; /* scratch */ - unsigned long r25; /* scratch */ - unsigned long r26; /* scratch */ - unsigned long r27; /* scratch */ - unsigned long r28; /* scratch */ - unsigned long r29; /* scratch */ - unsigned long r30; /* scratch */ - unsigned long r31; /* scratch */ - unsigned long ar_ccv; /* compare/exchange value (scratch) */ - - /* - * Floating point registers that the kernel considers scratch: - */ - struct ia64_fpreg f6; /* scratch */ - struct ia64_fpreg f7; /* scratch */ - struct ia64_fpreg f8; /* scratch */ - struct ia64_fpreg f9; /* scratch */ - struct ia64_fpreg f10; /* scratch */ - struct ia64_fpreg f11; /* scratch */ - - unsigned long r4; /* preserved */ - unsigned long r5; /* preserved */ - unsigned long r6; /* preserved */ - unsigned long r7; /* preserved */ - unsigned long eml_unat; /* used for emulating instruction */ - unsigned long pad0; /* alignment pad */ -}; - -static inline struct kvm_pt_regs *vcpu_regs(struct kvm_vcpu *v) -{ - return (struct kvm_pt_regs *) ((unsigned long) v + IA64_STK_OFFSET) - 1; -} - -typedef int kvm_vmm_entry(void); -typedef void kvm_tramp_entry(union context *host, union context *guest); - -struct kvm_vmm_info{ - struct module *module; - kvm_vmm_entry *vmm_entry; - kvm_tramp_entry *tramp_entry; - unsigned long vmm_ivt; -}; - -int kvm_highest_pending_irq(struct kvm_vcpu *vcpu); -int kvm_emulate_halt(struct kvm_vcpu *vcpu); -int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run); -void kvm_sal_emul(struct kvm_vcpu *vcpu); - -static inline void kvm_inject_nmi(struct kvm_vcpu *vcpu) {} - -#endif diff --git a/include/asm-ia64/kvm_para.h b/include/asm-ia64/kvm_para.h deleted file mode 100644 index 9f9796bb3441..000000000000 --- a/include/asm-ia64/kvm_para.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __IA64_KVM_PARA_H -#define __IA64_KVM_PARA_H - -/* - * asm-ia64/kvm_para.h - * - * Copyright (C) 2007 Xiantao Zhang - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * - */ - -static inline unsigned int kvm_arch_para_features(void) -{ - return 0; -} - -#endif diff --git a/include/asm-ia64/libata-portmap.h b/include/asm-ia64/libata-portmap.h deleted file mode 100644 index 0e00c9a9f410..000000000000 --- a/include/asm-ia64/libata-portmap.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __ASM_IA64_LIBATA_PORTMAP_H -#define __ASM_IA64_LIBATA_PORTMAP_H - -#define ATA_PRIMARY_CMD 0x1F0 -#define ATA_PRIMARY_CTL 0x3F6 -#define ATA_PRIMARY_IRQ(dev) isa_irq_to_vector(14) - -#define ATA_SECONDARY_CMD 0x170 -#define ATA_SECONDARY_CTL 0x376 -#define ATA_SECONDARY_IRQ(dev) isa_irq_to_vector(15) - -#endif diff --git a/include/asm-ia64/linkage.h b/include/asm-ia64/linkage.h deleted file mode 100644 index ef22a45c1890..000000000000 --- a/include/asm-ia64/linkage.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -#ifndef __ASSEMBLY__ - -#define asmlinkage CPP_ASMLINKAGE __attribute__((syscall_linkage)) - -#else - -#include - -#endif - -#endif diff --git a/include/asm-ia64/local.h b/include/asm-ia64/local.h deleted file mode 100644 index c11c530f74d0..000000000000 --- a/include/asm-ia64/local.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-ia64/machvec.h b/include/asm-ia64/machvec.h deleted file mode 100644 index a6d50c77b6bf..000000000000 --- a/include/asm-ia64/machvec.h +++ /dev/null @@ -1,460 +0,0 @@ -/* - * Machine vector for IA-64. - * - * Copyright (C) 1999 Silicon Graphics, Inc. - * Copyright (C) Srinivasa Thirumalachar - * Copyright (C) Vijay Chander - * Copyright (C) 1999-2001, 2003-2004 Hewlett-Packard Co. - * David Mosberger-Tang - */ -#ifndef _ASM_IA64_MACHVEC_H -#define _ASM_IA64_MACHVEC_H - -#include - -/* forward declarations: */ -struct device; -struct pt_regs; -struct scatterlist; -struct page; -struct mm_struct; -struct pci_bus; -struct task_struct; -struct pci_dev; -struct msi_desc; -struct dma_attrs; - -typedef void ia64_mv_setup_t (char **); -typedef void ia64_mv_cpu_init_t (void); -typedef void ia64_mv_irq_init_t (void); -typedef void ia64_mv_send_ipi_t (int, int, int, int); -typedef void ia64_mv_timer_interrupt_t (int, void *); -typedef void ia64_mv_global_tlb_purge_t (struct mm_struct *, unsigned long, unsigned long, unsigned long); -typedef void ia64_mv_tlb_migrate_finish_t (struct mm_struct *); -typedef u8 ia64_mv_irq_to_vector (int); -typedef unsigned int ia64_mv_local_vector_to_irq (u8); -typedef char *ia64_mv_pci_get_legacy_mem_t (struct pci_bus *); -typedef int ia64_mv_pci_legacy_read_t (struct pci_bus *, u16 port, u32 *val, - u8 size); -typedef int ia64_mv_pci_legacy_write_t (struct pci_bus *, u16 port, u32 val, - u8 size); -typedef void ia64_mv_migrate_t(struct task_struct * task); -typedef void ia64_mv_pci_fixup_bus_t (struct pci_bus *); -typedef void ia64_mv_kernel_launch_event_t(void); - -/* DMA-mapping interface: */ -typedef void ia64_mv_dma_init (void); -typedef void *ia64_mv_dma_alloc_coherent (struct device *, size_t, dma_addr_t *, gfp_t); -typedef void ia64_mv_dma_free_coherent (struct device *, size_t, void *, dma_addr_t); -typedef dma_addr_t ia64_mv_dma_map_single (struct device *, void *, size_t, int); -typedef void ia64_mv_dma_unmap_single (struct device *, dma_addr_t, size_t, int); -typedef int ia64_mv_dma_map_sg (struct device *, struct scatterlist *, int, int); -typedef void ia64_mv_dma_unmap_sg (struct device *, struct scatterlist *, int, int); -typedef void ia64_mv_dma_sync_single_for_cpu (struct device *, dma_addr_t, size_t, int); -typedef void ia64_mv_dma_sync_sg_for_cpu (struct device *, struct scatterlist *, int, int); -typedef void ia64_mv_dma_sync_single_for_device (struct device *, dma_addr_t, size_t, int); -typedef void ia64_mv_dma_sync_sg_for_device (struct device *, struct scatterlist *, int, int); -typedef int ia64_mv_dma_mapping_error(struct device *, dma_addr_t dma_addr); -typedef int ia64_mv_dma_supported (struct device *, u64); - -typedef dma_addr_t ia64_mv_dma_map_single_attrs (struct device *, void *, size_t, int, struct dma_attrs *); -typedef void ia64_mv_dma_unmap_single_attrs (struct device *, dma_addr_t, size_t, int, struct dma_attrs *); -typedef int ia64_mv_dma_map_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *); -typedef void ia64_mv_dma_unmap_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *); - -/* - * WARNING: The legacy I/O space is _architected_. Platforms are - * expected to follow this architected model (see Section 10.7 in the - * IA-64 Architecture Software Developer's Manual). Unfortunately, - * some broken machines do not follow that model, which is why we have - * to make the inX/outX operations part of the machine vector. - * Platform designers should follow the architected model whenever - * possible. - */ -typedef unsigned int ia64_mv_inb_t (unsigned long); -typedef unsigned int ia64_mv_inw_t (unsigned long); -typedef unsigned int ia64_mv_inl_t (unsigned long); -typedef void ia64_mv_outb_t (unsigned char, unsigned long); -typedef void ia64_mv_outw_t (unsigned short, unsigned long); -typedef void ia64_mv_outl_t (unsigned int, unsigned long); -typedef void ia64_mv_mmiowb_t (void); -typedef unsigned char ia64_mv_readb_t (const volatile void __iomem *); -typedef unsigned short ia64_mv_readw_t (const volatile void __iomem *); -typedef unsigned int ia64_mv_readl_t (const volatile void __iomem *); -typedef unsigned long ia64_mv_readq_t (const volatile void __iomem *); -typedef unsigned char ia64_mv_readb_relaxed_t (const volatile void __iomem *); -typedef unsigned short ia64_mv_readw_relaxed_t (const volatile void __iomem *); -typedef unsigned int ia64_mv_readl_relaxed_t (const volatile void __iomem *); -typedef unsigned long ia64_mv_readq_relaxed_t (const volatile void __iomem *); - -typedef int ia64_mv_setup_msi_irq_t (struct pci_dev *pdev, struct msi_desc *); -typedef void ia64_mv_teardown_msi_irq_t (unsigned int irq); - -static inline void -machvec_noop (void) -{ -} - -static inline void -machvec_noop_mm (struct mm_struct *mm) -{ -} - -static inline void -machvec_noop_task (struct task_struct *task) -{ -} - -static inline void -machvec_noop_bus (struct pci_bus *bus) -{ -} - -extern void machvec_setup (char **); -extern void machvec_timer_interrupt (int, void *); -extern void machvec_dma_sync_single (struct device *, dma_addr_t, size_t, int); -extern void machvec_dma_sync_sg (struct device *, struct scatterlist *, int, int); -extern void machvec_tlb_migrate_finish (struct mm_struct *); - -# if defined (CONFIG_IA64_HP_SIM) -# include -# elif defined (CONFIG_IA64_DIG) -# include -# elif defined (CONFIG_IA64_HP_ZX1) -# include -# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB) -# include -# elif defined (CONFIG_IA64_SGI_SN2) -# include -# elif defined (CONFIG_IA64_SGI_UV) -# include -# elif defined (CONFIG_IA64_GENERIC) - -# ifdef MACHVEC_PLATFORM_HEADER -# include MACHVEC_PLATFORM_HEADER -# else -# define platform_name ia64_mv.name -# define platform_setup ia64_mv.setup -# define platform_cpu_init ia64_mv.cpu_init -# define platform_irq_init ia64_mv.irq_init -# define platform_send_ipi ia64_mv.send_ipi -# define platform_timer_interrupt ia64_mv.timer_interrupt -# define platform_global_tlb_purge ia64_mv.global_tlb_purge -# define platform_tlb_migrate_finish ia64_mv.tlb_migrate_finish -# define platform_dma_init ia64_mv.dma_init -# define platform_dma_alloc_coherent ia64_mv.dma_alloc_coherent -# define platform_dma_free_coherent ia64_mv.dma_free_coherent -# define platform_dma_map_single_attrs ia64_mv.dma_map_single_attrs -# define platform_dma_unmap_single_attrs ia64_mv.dma_unmap_single_attrs -# define platform_dma_map_sg_attrs ia64_mv.dma_map_sg_attrs -# define platform_dma_unmap_sg_attrs ia64_mv.dma_unmap_sg_attrs -# define platform_dma_sync_single_for_cpu ia64_mv.dma_sync_single_for_cpu -# define platform_dma_sync_sg_for_cpu ia64_mv.dma_sync_sg_for_cpu -# define platform_dma_sync_single_for_device ia64_mv.dma_sync_single_for_device -# define platform_dma_sync_sg_for_device ia64_mv.dma_sync_sg_for_device -# define platform_dma_mapping_error ia64_mv.dma_mapping_error -# define platform_dma_supported ia64_mv.dma_supported -# define platform_irq_to_vector ia64_mv.irq_to_vector -# define platform_local_vector_to_irq ia64_mv.local_vector_to_irq -# define platform_pci_get_legacy_mem ia64_mv.pci_get_legacy_mem -# define platform_pci_legacy_read ia64_mv.pci_legacy_read -# define platform_pci_legacy_write ia64_mv.pci_legacy_write -# define platform_inb ia64_mv.inb -# define platform_inw ia64_mv.inw -# define platform_inl ia64_mv.inl -# define platform_outb ia64_mv.outb -# define platform_outw ia64_mv.outw -# define platform_outl ia64_mv.outl -# define platform_mmiowb ia64_mv.mmiowb -# define platform_readb ia64_mv.readb -# define platform_readw ia64_mv.readw -# define platform_readl ia64_mv.readl -# define platform_readq ia64_mv.readq -# define platform_readb_relaxed ia64_mv.readb_relaxed -# define platform_readw_relaxed ia64_mv.readw_relaxed -# define platform_readl_relaxed ia64_mv.readl_relaxed -# define platform_readq_relaxed ia64_mv.readq_relaxed -# define platform_migrate ia64_mv.migrate -# define platform_setup_msi_irq ia64_mv.setup_msi_irq -# define platform_teardown_msi_irq ia64_mv.teardown_msi_irq -# define platform_pci_fixup_bus ia64_mv.pci_fixup_bus -# define platform_kernel_launch_event ia64_mv.kernel_launch_event -# endif - -/* __attribute__((__aligned__(16))) is required to make size of the - * structure multiple of 16 bytes. - * This will fillup the holes created because of section 3.3.1 in - * Software Conventions guide. - */ -struct ia64_machine_vector { - const char *name; - ia64_mv_setup_t *setup; - ia64_mv_cpu_init_t *cpu_init; - ia64_mv_irq_init_t *irq_init; - ia64_mv_send_ipi_t *send_ipi; - ia64_mv_timer_interrupt_t *timer_interrupt; - ia64_mv_global_tlb_purge_t *global_tlb_purge; - ia64_mv_tlb_migrate_finish_t *tlb_migrate_finish; - ia64_mv_dma_init *dma_init; - ia64_mv_dma_alloc_coherent *dma_alloc_coherent; - ia64_mv_dma_free_coherent *dma_free_coherent; - ia64_mv_dma_map_single_attrs *dma_map_single_attrs; - ia64_mv_dma_unmap_single_attrs *dma_unmap_single_attrs; - ia64_mv_dma_map_sg_attrs *dma_map_sg_attrs; - ia64_mv_dma_unmap_sg_attrs *dma_unmap_sg_attrs; - ia64_mv_dma_sync_single_for_cpu *dma_sync_single_for_cpu; - ia64_mv_dma_sync_sg_for_cpu *dma_sync_sg_for_cpu; - ia64_mv_dma_sync_single_for_device *dma_sync_single_for_device; - ia64_mv_dma_sync_sg_for_device *dma_sync_sg_for_device; - ia64_mv_dma_mapping_error *dma_mapping_error; - ia64_mv_dma_supported *dma_supported; - ia64_mv_irq_to_vector *irq_to_vector; - ia64_mv_local_vector_to_irq *local_vector_to_irq; - ia64_mv_pci_get_legacy_mem_t *pci_get_legacy_mem; - ia64_mv_pci_legacy_read_t *pci_legacy_read; - ia64_mv_pci_legacy_write_t *pci_legacy_write; - ia64_mv_inb_t *inb; - ia64_mv_inw_t *inw; - ia64_mv_inl_t *inl; - ia64_mv_outb_t *outb; - ia64_mv_outw_t *outw; - ia64_mv_outl_t *outl; - ia64_mv_mmiowb_t *mmiowb; - ia64_mv_readb_t *readb; - ia64_mv_readw_t *readw; - ia64_mv_readl_t *readl; - ia64_mv_readq_t *readq; - ia64_mv_readb_relaxed_t *readb_relaxed; - ia64_mv_readw_relaxed_t *readw_relaxed; - ia64_mv_readl_relaxed_t *readl_relaxed; - ia64_mv_readq_relaxed_t *readq_relaxed; - ia64_mv_migrate_t *migrate; - ia64_mv_setup_msi_irq_t *setup_msi_irq; - ia64_mv_teardown_msi_irq_t *teardown_msi_irq; - ia64_mv_pci_fixup_bus_t *pci_fixup_bus; - ia64_mv_kernel_launch_event_t *kernel_launch_event; -} __attribute__((__aligned__(16))); /* align attrib? see above comment */ - -#define MACHVEC_INIT(name) \ -{ \ - #name, \ - platform_setup, \ - platform_cpu_init, \ - platform_irq_init, \ - platform_send_ipi, \ - platform_timer_interrupt, \ - platform_global_tlb_purge, \ - platform_tlb_migrate_finish, \ - platform_dma_init, \ - platform_dma_alloc_coherent, \ - platform_dma_free_coherent, \ - platform_dma_map_single_attrs, \ - platform_dma_unmap_single_attrs, \ - platform_dma_map_sg_attrs, \ - platform_dma_unmap_sg_attrs, \ - platform_dma_sync_single_for_cpu, \ - platform_dma_sync_sg_for_cpu, \ - platform_dma_sync_single_for_device, \ - platform_dma_sync_sg_for_device, \ - platform_dma_mapping_error, \ - platform_dma_supported, \ - platform_irq_to_vector, \ - platform_local_vector_to_irq, \ - platform_pci_get_legacy_mem, \ - platform_pci_legacy_read, \ - platform_pci_legacy_write, \ - platform_inb, \ - platform_inw, \ - platform_inl, \ - platform_outb, \ - platform_outw, \ - platform_outl, \ - platform_mmiowb, \ - platform_readb, \ - platform_readw, \ - platform_readl, \ - platform_readq, \ - platform_readb_relaxed, \ - platform_readw_relaxed, \ - platform_readl_relaxed, \ - platform_readq_relaxed, \ - platform_migrate, \ - platform_setup_msi_irq, \ - platform_teardown_msi_irq, \ - platform_pci_fixup_bus, \ - platform_kernel_launch_event \ -} - -extern struct ia64_machine_vector ia64_mv; -extern void machvec_init (const char *name); -extern void machvec_init_from_cmdline(const char *cmdline); - -# else -# error Unknown configuration. Update asm-ia64/machvec.h. -# endif /* CONFIG_IA64_GENERIC */ - -/* - * Declare default routines which aren't declared anywhere else: - */ -extern ia64_mv_dma_init swiotlb_init; -extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent; -extern ia64_mv_dma_free_coherent swiotlb_free_coherent; -extern ia64_mv_dma_map_single swiotlb_map_single; -extern ia64_mv_dma_map_single_attrs swiotlb_map_single_attrs; -extern ia64_mv_dma_unmap_single swiotlb_unmap_single; -extern ia64_mv_dma_unmap_single_attrs swiotlb_unmap_single_attrs; -extern ia64_mv_dma_map_sg swiotlb_map_sg; -extern ia64_mv_dma_map_sg_attrs swiotlb_map_sg_attrs; -extern ia64_mv_dma_unmap_sg swiotlb_unmap_sg; -extern ia64_mv_dma_unmap_sg_attrs swiotlb_unmap_sg_attrs; -extern ia64_mv_dma_sync_single_for_cpu swiotlb_sync_single_for_cpu; -extern ia64_mv_dma_sync_sg_for_cpu swiotlb_sync_sg_for_cpu; -extern ia64_mv_dma_sync_single_for_device swiotlb_sync_single_for_device; -extern ia64_mv_dma_sync_sg_for_device swiotlb_sync_sg_for_device; -extern ia64_mv_dma_mapping_error swiotlb_dma_mapping_error; -extern ia64_mv_dma_supported swiotlb_dma_supported; - -/* - * Define default versions so we can extend machvec for new platforms without having - * to update the machvec files for all existing platforms. - */ -#ifndef platform_setup -# define platform_setup machvec_setup -#endif -#ifndef platform_cpu_init -# define platform_cpu_init machvec_noop -#endif -#ifndef platform_irq_init -# define platform_irq_init machvec_noop -#endif - -#ifndef platform_send_ipi -# define platform_send_ipi ia64_send_ipi /* default to architected version */ -#endif -#ifndef platform_timer_interrupt -# define platform_timer_interrupt machvec_timer_interrupt -#endif -#ifndef platform_global_tlb_purge -# define platform_global_tlb_purge ia64_global_tlb_purge /* default to architected version */ -#endif -#ifndef platform_tlb_migrate_finish -# define platform_tlb_migrate_finish machvec_noop_mm -#endif -#ifndef platform_kernel_launch_event -# define platform_kernel_launch_event machvec_noop -#endif -#ifndef platform_dma_init -# define platform_dma_init swiotlb_init -#endif -#ifndef platform_dma_alloc_coherent -# define platform_dma_alloc_coherent swiotlb_alloc_coherent -#endif -#ifndef platform_dma_free_coherent -# define platform_dma_free_coherent swiotlb_free_coherent -#endif -#ifndef platform_dma_map_single_attrs -# define platform_dma_map_single_attrs swiotlb_map_single_attrs -#endif -#ifndef platform_dma_unmap_single_attrs -# define platform_dma_unmap_single_attrs swiotlb_unmap_single_attrs -#endif -#ifndef platform_dma_map_sg_attrs -# define platform_dma_map_sg_attrs swiotlb_map_sg_attrs -#endif -#ifndef platform_dma_unmap_sg_attrs -# define platform_dma_unmap_sg_attrs swiotlb_unmap_sg_attrs -#endif -#ifndef platform_dma_sync_single_for_cpu -# define platform_dma_sync_single_for_cpu swiotlb_sync_single_for_cpu -#endif -#ifndef platform_dma_sync_sg_for_cpu -# define platform_dma_sync_sg_for_cpu swiotlb_sync_sg_for_cpu -#endif -#ifndef platform_dma_sync_single_for_device -# define platform_dma_sync_single_for_device swiotlb_sync_single_for_device -#endif -#ifndef platform_dma_sync_sg_for_device -# define platform_dma_sync_sg_for_device swiotlb_sync_sg_for_device -#endif -#ifndef platform_dma_mapping_error -# define platform_dma_mapping_error swiotlb_dma_mapping_error -#endif -#ifndef platform_dma_supported -# define platform_dma_supported swiotlb_dma_supported -#endif -#ifndef platform_irq_to_vector -# define platform_irq_to_vector __ia64_irq_to_vector -#endif -#ifndef platform_local_vector_to_irq -# define platform_local_vector_to_irq __ia64_local_vector_to_irq -#endif -#ifndef platform_pci_get_legacy_mem -# define platform_pci_get_legacy_mem ia64_pci_get_legacy_mem -#endif -#ifndef platform_pci_legacy_read -# define platform_pci_legacy_read ia64_pci_legacy_read -extern int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size); -#endif -#ifndef platform_pci_legacy_write -# define platform_pci_legacy_write ia64_pci_legacy_write -extern int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size); -#endif -#ifndef platform_inb -# define platform_inb __ia64_inb -#endif -#ifndef platform_inw -# define platform_inw __ia64_inw -#endif -#ifndef platform_inl -# define platform_inl __ia64_inl -#endif -#ifndef platform_outb -# define platform_outb __ia64_outb -#endif -#ifndef platform_outw -# define platform_outw __ia64_outw -#endif -#ifndef platform_outl -# define platform_outl __ia64_outl -#endif -#ifndef platform_mmiowb -# define platform_mmiowb __ia64_mmiowb -#endif -#ifndef platform_readb -# define platform_readb __ia64_readb -#endif -#ifndef platform_readw -# define platform_readw __ia64_readw -#endif -#ifndef platform_readl -# define platform_readl __ia64_readl -#endif -#ifndef platform_readq -# define platform_readq __ia64_readq -#endif -#ifndef platform_readb_relaxed -# define platform_readb_relaxed __ia64_readb_relaxed -#endif -#ifndef platform_readw_relaxed -# define platform_readw_relaxed __ia64_readw_relaxed -#endif -#ifndef platform_readl_relaxed -# define platform_readl_relaxed __ia64_readl_relaxed -#endif -#ifndef platform_readq_relaxed -# define platform_readq_relaxed __ia64_readq_relaxed -#endif -#ifndef platform_migrate -# define platform_migrate machvec_noop_task -#endif -#ifndef platform_setup_msi_irq -# define platform_setup_msi_irq ((ia64_mv_setup_msi_irq_t*)NULL) -#endif -#ifndef platform_teardown_msi_irq -# define platform_teardown_msi_irq ((ia64_mv_teardown_msi_irq_t*)NULL) -#endif -#ifndef platform_pci_fixup_bus -# define platform_pci_fixup_bus machvec_noop_bus -#endif - -#endif /* _ASM_IA64_MACHVEC_H */ diff --git a/include/asm-ia64/machvec_dig.h b/include/asm-ia64/machvec_dig.h deleted file mode 100644 index 8a0752f40987..000000000000 --- a/include/asm-ia64/machvec_dig.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _ASM_IA64_MACHVEC_DIG_h -#define _ASM_IA64_MACHVEC_DIG_h - -extern ia64_mv_setup_t dig_setup; - -/* - * This stuff has dual use! - * - * For a generic kernel, the macros are used to initialize the - * platform's machvec structure. When compiling a non-generic kernel, - * the macros are used directly. - */ -#define platform_name "dig" -#define platform_setup dig_setup - -#endif /* _ASM_IA64_MACHVEC_DIG_h */ diff --git a/include/asm-ia64/machvec_hpsim.h b/include/asm-ia64/machvec_hpsim.h deleted file mode 100644 index cf72fc87fdfe..000000000000 --- a/include/asm-ia64/machvec_hpsim.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _ASM_IA64_MACHVEC_HPSIM_h -#define _ASM_IA64_MACHVEC_HPSIM_h - -extern ia64_mv_setup_t hpsim_setup; -extern ia64_mv_irq_init_t hpsim_irq_init; - -/* - * This stuff has dual use! - * - * For a generic kernel, the macros are used to initialize the - * platform's machvec structure. When compiling a non-generic kernel, - * the macros are used directly. - */ -#define platform_name "hpsim" -#define platform_setup hpsim_setup -#define platform_irq_init hpsim_irq_init - -#endif /* _ASM_IA64_MACHVEC_HPSIM_h */ diff --git a/include/asm-ia64/machvec_hpzx1.h b/include/asm-ia64/machvec_hpzx1.h deleted file mode 100644 index 2f57f5144b9f..000000000000 --- a/include/asm-ia64/machvec_hpzx1.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef _ASM_IA64_MACHVEC_HPZX1_h -#define _ASM_IA64_MACHVEC_HPZX1_h - -extern ia64_mv_setup_t dig_setup; -extern ia64_mv_dma_alloc_coherent sba_alloc_coherent; -extern ia64_mv_dma_free_coherent sba_free_coherent; -extern ia64_mv_dma_map_single_attrs sba_map_single_attrs; -extern ia64_mv_dma_unmap_single_attrs sba_unmap_single_attrs; -extern ia64_mv_dma_map_sg_attrs sba_map_sg_attrs; -extern ia64_mv_dma_unmap_sg_attrs sba_unmap_sg_attrs; -extern ia64_mv_dma_supported sba_dma_supported; -extern ia64_mv_dma_mapping_error sba_dma_mapping_error; - -/* - * This stuff has dual use! - * - * For a generic kernel, the macros are used to initialize the - * platform's machvec structure. When compiling a non-generic kernel, - * the macros are used directly. - */ -#define platform_name "hpzx1" -#define platform_setup dig_setup -#define platform_dma_init machvec_noop -#define platform_dma_alloc_coherent sba_alloc_coherent -#define platform_dma_free_coherent sba_free_coherent -#define platform_dma_map_single_attrs sba_map_single_attrs -#define platform_dma_unmap_single_attrs sba_unmap_single_attrs -#define platform_dma_map_sg_attrs sba_map_sg_attrs -#define platform_dma_unmap_sg_attrs sba_unmap_sg_attrs -#define platform_dma_sync_single_for_cpu machvec_dma_sync_single -#define platform_dma_sync_sg_for_cpu machvec_dma_sync_sg -#define platform_dma_sync_single_for_device machvec_dma_sync_single -#define platform_dma_sync_sg_for_device machvec_dma_sync_sg -#define platform_dma_supported sba_dma_supported -#define platform_dma_mapping_error sba_dma_mapping_error - -#endif /* _ASM_IA64_MACHVEC_HPZX1_h */ diff --git a/include/asm-ia64/machvec_hpzx1_swiotlb.h b/include/asm-ia64/machvec_hpzx1_swiotlb.h deleted file mode 100644 index a842cdda827b..000000000000 --- a/include/asm-ia64/machvec_hpzx1_swiotlb.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h -#define _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h - -extern ia64_mv_setup_t dig_setup; -extern ia64_mv_dma_alloc_coherent hwsw_alloc_coherent; -extern ia64_mv_dma_free_coherent hwsw_free_coherent; -extern ia64_mv_dma_map_single_attrs hwsw_map_single_attrs; -extern ia64_mv_dma_unmap_single_attrs hwsw_unmap_single_attrs; -extern ia64_mv_dma_map_sg_attrs hwsw_map_sg_attrs; -extern ia64_mv_dma_unmap_sg_attrs hwsw_unmap_sg_attrs; -extern ia64_mv_dma_supported hwsw_dma_supported; -extern ia64_mv_dma_mapping_error hwsw_dma_mapping_error; -extern ia64_mv_dma_sync_single_for_cpu hwsw_sync_single_for_cpu; -extern ia64_mv_dma_sync_sg_for_cpu hwsw_sync_sg_for_cpu; -extern ia64_mv_dma_sync_single_for_device hwsw_sync_single_for_device; -extern ia64_mv_dma_sync_sg_for_device hwsw_sync_sg_for_device; - -/* - * This stuff has dual use! - * - * For a generic kernel, the macros are used to initialize the - * platform's machvec structure. When compiling a non-generic kernel, - * the macros are used directly. - */ -#define platform_name "hpzx1_swiotlb" - -#define platform_setup dig_setup -#define platform_dma_init machvec_noop -#define platform_dma_alloc_coherent hwsw_alloc_coherent -#define platform_dma_free_coherent hwsw_free_coherent -#define platform_dma_map_single_attrs hwsw_map_single_attrs -#define platform_dma_unmap_single_attrs hwsw_unmap_single_attrs -#define platform_dma_map_sg_attrs hwsw_map_sg_attrs -#define platform_dma_unmap_sg_attrs hwsw_unmap_sg_attrs -#define platform_dma_supported hwsw_dma_supported -#define platform_dma_mapping_error hwsw_dma_mapping_error -#define platform_dma_sync_single_for_cpu hwsw_sync_single_for_cpu -#define platform_dma_sync_sg_for_cpu hwsw_sync_sg_for_cpu -#define platform_dma_sync_single_for_device hwsw_sync_single_for_device -#define platform_dma_sync_sg_for_device hwsw_sync_sg_for_device - -#endif /* _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h */ diff --git a/include/asm-ia64/machvec_init.h b/include/asm-ia64/machvec_init.h deleted file mode 100644 index 7f21249fba3f..000000000000 --- a/include/asm-ia64/machvec_init.h +++ /dev/null @@ -1,33 +0,0 @@ -#include - -extern ia64_mv_send_ipi_t ia64_send_ipi; -extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge; -extern ia64_mv_irq_to_vector __ia64_irq_to_vector; -extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq; -extern ia64_mv_pci_get_legacy_mem_t ia64_pci_get_legacy_mem; -extern ia64_mv_pci_legacy_read_t ia64_pci_legacy_read; -extern ia64_mv_pci_legacy_write_t ia64_pci_legacy_write; - -extern ia64_mv_inb_t __ia64_inb; -extern ia64_mv_inw_t __ia64_inw; -extern ia64_mv_inl_t __ia64_inl; -extern ia64_mv_outb_t __ia64_outb; -extern ia64_mv_outw_t __ia64_outw; -extern ia64_mv_outl_t __ia64_outl; -extern ia64_mv_mmiowb_t __ia64_mmiowb; -extern ia64_mv_readb_t __ia64_readb; -extern ia64_mv_readw_t __ia64_readw; -extern ia64_mv_readl_t __ia64_readl; -extern ia64_mv_readq_t __ia64_readq; -extern ia64_mv_readb_t __ia64_readb_relaxed; -extern ia64_mv_readw_t __ia64_readw_relaxed; -extern ia64_mv_readl_t __ia64_readl_relaxed; -extern ia64_mv_readq_t __ia64_readq_relaxed; - -#define MACHVEC_HELPER(name) \ - struct ia64_machine_vector machvec_##name __attribute__ ((unused, __section__ (".machvec"))) \ - = MACHVEC_INIT(name); - -#define MACHVEC_DEFINE(name) MACHVEC_HELPER(name) - -MACHVEC_DEFINE(MACHVEC_PLATFORM_NAME) diff --git a/include/asm-ia64/machvec_sn2.h b/include/asm-ia64/machvec_sn2.h deleted file mode 100644 index 781308ea7b88..000000000000 --- a/include/asm-ia64/machvec_sn2.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright (c) 2002-2003,2006 Silicon Graphics, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * For further information regarding this notice, see: - * - * http://oss.sgi.com/projects/GenInfo/NoticeExplan - */ - -#ifndef _ASM_IA64_MACHVEC_SN2_H -#define _ASM_IA64_MACHVEC_SN2_H - -extern ia64_mv_setup_t sn_setup; -extern ia64_mv_cpu_init_t sn_cpu_init; -extern ia64_mv_irq_init_t sn_irq_init; -extern ia64_mv_send_ipi_t sn2_send_IPI; -extern ia64_mv_timer_interrupt_t sn_timer_interrupt; -extern ia64_mv_global_tlb_purge_t sn2_global_tlb_purge; -extern ia64_mv_tlb_migrate_finish_t sn_tlb_migrate_finish; -extern ia64_mv_irq_to_vector sn_irq_to_vector; -extern ia64_mv_local_vector_to_irq sn_local_vector_to_irq; -extern ia64_mv_pci_get_legacy_mem_t sn_pci_get_legacy_mem; -extern ia64_mv_pci_legacy_read_t sn_pci_legacy_read; -extern ia64_mv_pci_legacy_write_t sn_pci_legacy_write; -extern ia64_mv_inb_t __sn_inb; -extern ia64_mv_inw_t __sn_inw; -extern ia64_mv_inl_t __sn_inl; -extern ia64_mv_outb_t __sn_outb; -extern ia64_mv_outw_t __sn_outw; -extern ia64_mv_outl_t __sn_outl; -extern ia64_mv_mmiowb_t __sn_mmiowb; -extern ia64_mv_readb_t __sn_readb; -extern ia64_mv_readw_t __sn_readw; -extern ia64_mv_readl_t __sn_readl; -extern ia64_mv_readq_t __sn_readq; -extern ia64_mv_readb_t __sn_readb_relaxed; -extern ia64_mv_readw_t __sn_readw_relaxed; -extern ia64_mv_readl_t __sn_readl_relaxed; -extern ia64_mv_readq_t __sn_readq_relaxed; -extern ia64_mv_dma_alloc_coherent sn_dma_alloc_coherent; -extern ia64_mv_dma_free_coherent sn_dma_free_coherent; -extern ia64_mv_dma_map_single_attrs sn_dma_map_single_attrs; -extern ia64_mv_dma_unmap_single_attrs sn_dma_unmap_single_attrs; -extern ia64_mv_dma_map_sg_attrs sn_dma_map_sg_attrs; -extern ia64_mv_dma_unmap_sg_attrs sn_dma_unmap_sg_attrs; -extern ia64_mv_dma_sync_single_for_cpu sn_dma_sync_single_for_cpu; -extern ia64_mv_dma_sync_sg_for_cpu sn_dma_sync_sg_for_cpu; -extern ia64_mv_dma_sync_single_for_device sn_dma_sync_single_for_device; -extern ia64_mv_dma_sync_sg_for_device sn_dma_sync_sg_for_device; -extern ia64_mv_dma_mapping_error sn_dma_mapping_error; -extern ia64_mv_dma_supported sn_dma_supported; -extern ia64_mv_migrate_t sn_migrate; -extern ia64_mv_kernel_launch_event_t sn_kernel_launch_event; -extern ia64_mv_setup_msi_irq_t sn_setup_msi_irq; -extern ia64_mv_teardown_msi_irq_t sn_teardown_msi_irq; -extern ia64_mv_pci_fixup_bus_t sn_pci_fixup_bus; - - -/* - * This stuff has dual use! - * - * For a generic kernel, the macros are used to initialize the - * platform's machvec structure. When compiling a non-generic kernel, - * the macros are used directly. - */ -#define platform_name "sn2" -#define platform_setup sn_setup -#define platform_cpu_init sn_cpu_init -#define platform_irq_init sn_irq_init -#define platform_send_ipi sn2_send_IPI -#define platform_timer_interrupt sn_timer_interrupt -#define platform_global_tlb_purge sn2_global_tlb_purge -#define platform_tlb_migrate_finish sn_tlb_migrate_finish -#define platform_pci_fixup sn_pci_fixup -#define platform_inb __sn_inb -#define platform_inw __sn_inw -#define platform_inl __sn_inl -#define platform_outb __sn_outb -#define platform_outw __sn_outw -#define platform_outl __sn_outl -#define platform_mmiowb __sn_mmiowb -#define platform_readb __sn_readb -#define platform_readw __sn_readw -#define platform_readl __sn_readl -#define platform_readq __sn_readq -#define platform_readb_relaxed __sn_readb_relaxed -#define platform_readw_relaxed __sn_readw_relaxed -#define platform_readl_relaxed __sn_readl_relaxed -#define platform_readq_relaxed __sn_readq_relaxed -#define platform_irq_to_vector sn_irq_to_vector -#define platform_local_vector_to_irq sn_local_vector_to_irq -#define platform_pci_get_legacy_mem sn_pci_get_legacy_mem -#define platform_pci_legacy_read sn_pci_legacy_read -#define platform_pci_legacy_write sn_pci_legacy_write -#define platform_dma_init machvec_noop -#define platform_dma_alloc_coherent sn_dma_alloc_coherent -#define platform_dma_free_coherent sn_dma_free_coherent -#define platform_dma_map_single_attrs sn_dma_map_single_attrs -#define platform_dma_unmap_single_attrs sn_dma_unmap_single_attrs -#define platform_dma_map_sg_attrs sn_dma_map_sg_attrs -#define platform_dma_unmap_sg_attrs sn_dma_unmap_sg_attrs -#define platform_dma_sync_single_for_cpu sn_dma_sync_single_for_cpu -#define platform_dma_sync_sg_for_cpu sn_dma_sync_sg_for_cpu -#define platform_dma_sync_single_for_device sn_dma_sync_single_for_device -#define platform_dma_sync_sg_for_device sn_dma_sync_sg_for_device -#define platform_dma_mapping_error sn_dma_mapping_error -#define platform_dma_supported sn_dma_supported -#define platform_migrate sn_migrate -#define platform_kernel_launch_event sn_kernel_launch_event -#ifdef CONFIG_PCI_MSI -#define platform_setup_msi_irq sn_setup_msi_irq -#define platform_teardown_msi_irq sn_teardown_msi_irq -#else -#define platform_setup_msi_irq ((ia64_mv_setup_msi_irq_t*)NULL) -#define platform_teardown_msi_irq ((ia64_mv_teardown_msi_irq_t*)NULL) -#endif -#define platform_pci_fixup_bus sn_pci_fixup_bus - -#include - -#endif /* _ASM_IA64_MACHVEC_SN2_H */ diff --git a/include/asm-ia64/machvec_uv.h b/include/asm-ia64/machvec_uv.h deleted file mode 100644 index 2931447f3813..000000000000 --- a/include/asm-ia64/machvec_uv.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * SGI UV Core Functions - * - * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_MACHVEC_UV_H -#define _ASM_IA64_MACHVEC_UV_H - -extern ia64_mv_setup_t uv_setup; - -/* - * This stuff has dual use! - * - * For a generic kernel, the macros are used to initialize the - * platform's machvec structure. When compiling a non-generic kernel, - * the macros are used directly. - */ -#define platform_name "uv" -#define platform_setup uv_setup - -#endif /* _ASM_IA64_MACHVEC_UV_H */ diff --git a/include/asm-ia64/mc146818rtc.h b/include/asm-ia64/mc146818rtc.h deleted file mode 100644 index 407787a237ba..000000000000 --- a/include/asm-ia64/mc146818rtc.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _ASM_IA64_MC146818RTC_H -#define _ASM_IA64_MC146818RTC_H - -/* - * Machine dependent access functions for RTC registers. - */ - -/* empty include file to satisfy the include in genrtc.c */ - -#endif /* _ASM_IA64_MC146818RTC_H */ diff --git a/include/asm-ia64/mca.h b/include/asm-ia64/mca.h deleted file mode 100644 index 18a4321349a3..000000000000 --- a/include/asm-ia64/mca.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - * File: mca.h - * Purpose: Machine check handling specific defines - * - * Copyright (C) 1999, 2004 Silicon Graphics, Inc. - * Copyright (C) Vijay Chander - * Copyright (C) Srinivasa Thirumalachar - * Copyright (C) Russ Anderson - */ - -#ifndef _ASM_IA64_MCA_H -#define _ASM_IA64_MCA_H - -#if !defined(__ASSEMBLY__) - -#include -#include - -#include -#include -#include -#include - -#define IA64_MCA_RENDEZ_TIMEOUT (20 * 1000) /* value in milliseconds - 20 seconds */ - -typedef struct ia64_fptr { - unsigned long fp; - unsigned long gp; -} ia64_fptr_t; - -typedef union cmcv_reg_u { - u64 cmcv_regval; - struct { - u64 cmcr_vector : 8; - u64 cmcr_reserved1 : 4; - u64 cmcr_ignored1 : 1; - u64 cmcr_reserved2 : 3; - u64 cmcr_mask : 1; - u64 cmcr_ignored2 : 47; - } cmcv_reg_s; - -} cmcv_reg_t; - -#define cmcv_mask cmcv_reg_s.cmcr_mask -#define cmcv_vector cmcv_reg_s.cmcr_vector - -enum { - IA64_MCA_RENDEZ_CHECKIN_NOTDONE = 0x0, - IA64_MCA_RENDEZ_CHECKIN_DONE = 0x1, - IA64_MCA_RENDEZ_CHECKIN_INIT = 0x2, - IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA = 0x3, -}; - -/* Information maintained by the MC infrastructure */ -typedef struct ia64_mc_info_s { - u64 imi_mca_handler; - size_t imi_mca_handler_size; - u64 imi_monarch_init_handler; - size_t imi_monarch_init_handler_size; - u64 imi_slave_init_handler; - size_t imi_slave_init_handler_size; - u8 imi_rendez_checkin[NR_CPUS]; - -} ia64_mc_info_t; - -/* Handover state from SAL to OS and vice versa, for both MCA and INIT events. - * Besides the handover state, it also contains some saved registers from the - * time of the event. - * Note: mca_asm.S depends on the precise layout of this structure. - */ - -struct ia64_sal_os_state { - - /* SAL to OS */ - u64 os_gp; /* GP of the os registered with the SAL, physical */ - u64 pal_proc; /* PAL_PROC entry point, physical */ - u64 sal_proc; /* SAL_PROC entry point, physical */ - u64 rv_rc; /* MCA - Rendezvous state, INIT - reason code */ - u64 proc_state_param; /* from R18 */ - u64 monarch; /* 1 for a monarch event, 0 for a slave */ - - /* common */ - u64 sal_ra; /* Return address in SAL, physical */ - u64 sal_gp; /* GP of the SAL - physical */ - pal_min_state_area_t *pal_min_state; /* from R17. physical in asm, virtual in C */ - /* Previous values of IA64_KR(CURRENT) and IA64_KR(CURRENT_STACK). - * Note: if the MCA/INIT recovery code wants to resume to a new context - * then it must change these values to reflect the new kernel stack. - */ - u64 prev_IA64_KR_CURRENT; /* previous value of IA64_KR(CURRENT) */ - u64 prev_IA64_KR_CURRENT_STACK; - struct task_struct *prev_task; /* previous task, NULL if it is not useful */ - /* Some interrupt registers are not saved in minstate, pt_regs or - * switch_stack. Because MCA/INIT can occur when interrupts are - * disabled, we need to save the additional interrupt registers over - * MCA/INIT and resume. - */ - u64 isr; - u64 ifa; - u64 itir; - u64 iipa; - u64 iim; - u64 iha; - - /* OS to SAL */ - u64 os_status; /* OS status to SAL, enum below */ - u64 context; /* 0 if return to same context - 1 if return to new context */ -}; - -enum { - IA64_MCA_CORRECTED = 0x0, /* Error has been corrected by OS_MCA */ - IA64_MCA_WARM_BOOT = -1, /* Warm boot of the system need from SAL */ - IA64_MCA_COLD_BOOT = -2, /* Cold boot of the system need from SAL */ - IA64_MCA_HALT = -3 /* System to be halted by SAL */ -}; - -enum { - IA64_INIT_RESUME = 0x0, /* Resume after return from INIT */ - IA64_INIT_WARM_BOOT = -1, /* Warm boot of the system need from SAL */ -}; - -enum { - IA64_MCA_SAME_CONTEXT = 0x0, /* SAL to return to same context */ - IA64_MCA_NEW_CONTEXT = -1 /* SAL to return to new context */ -}; - -/* Per-CPU MCA state that is too big for normal per-CPU variables. */ - -struct ia64_mca_cpu { - u64 mca_stack[KERNEL_STACK_SIZE/8]; - u64 init_stack[KERNEL_STACK_SIZE/8]; -}; - -/* Array of physical addresses of each CPU's MCA area. */ -extern unsigned long __per_cpu_mca[NR_CPUS]; - -extern int cpe_vector; -extern int ia64_cpe_irq; -extern void ia64_mca_init(void); -extern void ia64_mca_cpu_init(void *); -extern void ia64_os_mca_dispatch(void); -extern void ia64_os_mca_dispatch_end(void); -extern void ia64_mca_ucmc_handler(struct pt_regs *, struct ia64_sal_os_state *); -extern void ia64_init_handler(struct pt_regs *, - struct switch_stack *, - struct ia64_sal_os_state *); -extern void ia64_monarch_init_handler(void); -extern void ia64_slave_init_handler(void); -extern void ia64_mca_cmc_vector_setup(void); -extern int ia64_reg_MCA_extension(int (*fn)(void *, struct ia64_sal_os_state *)); -extern void ia64_unreg_MCA_extension(void); -extern u64 ia64_get_rnat(u64 *); -extern void ia64_mca_printk(const char * fmt, ...) - __attribute__ ((format (printf, 1, 2))); - -struct ia64_mca_notify_die { - struct ia64_sal_os_state *sos; - int *monarch_cpu; - int *data; -}; - -DECLARE_PER_CPU(u64, ia64_mca_pal_base); - -#else /* __ASSEMBLY__ */ - -#define IA64_MCA_CORRECTED 0x0 /* Error has been corrected by OS_MCA */ -#define IA64_MCA_WARM_BOOT -1 /* Warm boot of the system need from SAL */ -#define IA64_MCA_COLD_BOOT -2 /* Cold boot of the system need from SAL */ -#define IA64_MCA_HALT -3 /* System to be halted by SAL */ - -#define IA64_INIT_RESUME 0x0 /* Resume after return from INIT */ -#define IA64_INIT_WARM_BOOT -1 /* Warm boot of the system need from SAL */ - -#define IA64_MCA_SAME_CONTEXT 0x0 /* SAL to return to same context */ -#define IA64_MCA_NEW_CONTEXT -1 /* SAL to return to new context */ - -#endif /* !__ASSEMBLY__ */ -#endif /* _ASM_IA64_MCA_H */ diff --git a/include/asm-ia64/mca_asm.h b/include/asm-ia64/mca_asm.h deleted file mode 100644 index dd2a5b134390..000000000000 --- a/include/asm-ia64/mca_asm.h +++ /dev/null @@ -1,242 +0,0 @@ -/* - * File: mca_asm.h - * Purpose: Machine check handling specific defines - * - * Copyright (C) 1999 Silicon Graphics, Inc. - * Copyright (C) Vijay Chander - * Copyright (C) Srinivasa Thirumalachar - * Copyright (C) 2000 Hewlett-Packard Co. - * Copyright (C) 2000 David Mosberger-Tang - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2002 Jenna Hall - * Copyright (C) 2005 Silicon Graphics, Inc - * Copyright (C) 2005 Keith Owens - */ -#ifndef _ASM_IA64_MCA_ASM_H -#define _ASM_IA64_MCA_ASM_H - -#define PSR_IC 13 -#define PSR_I 14 -#define PSR_DT 17 -#define PSR_RT 27 -#define PSR_MC 35 -#define PSR_IT 36 -#define PSR_BN 44 - -/* - * This macro converts a instruction virtual address to a physical address - * Right now for simulation purposes the virtual addresses are - * direct mapped to physical addresses. - * 1. Lop off bits 61 thru 63 in the virtual address - */ -#define INST_VA_TO_PA(addr) \ - dep addr = 0, addr, 61, 3 -/* - * This macro converts a data virtual address to a physical address - * Right now for simulation purposes the virtual addresses are - * direct mapped to physical addresses. - * 1. Lop off bits 61 thru 63 in the virtual address - */ -#define DATA_VA_TO_PA(addr) \ - tpa addr = addr -/* - * This macro converts a data physical address to a virtual address - * Right now for simulation purposes the virtual addresses are - * direct mapped to physical addresses. - * 1. Put 0x7 in bits 61 thru 63. - */ -#define DATA_PA_TO_VA(addr,temp) \ - mov temp = 0x7 ;; \ - dep addr = temp, addr, 61, 3 - -#define GET_THIS_PADDR(reg, var) \ - mov reg = IA64_KR(PER_CPU_DATA);; \ - addl reg = THIS_CPU(var), reg - -/* - * This macro jumps to the instruction at the given virtual address - * and starts execution in physical mode with all the address - * translations turned off. - * 1. Save the current psr - * 2. Make sure that all the upper 32 bits are off - * - * 3. Clear the interrupt enable and interrupt state collection bits - * in the psr before updating the ipsr and iip. - * - * 4. Turn off the instruction, data and rse translation bits of the psr - * and store the new value into ipsr - * Also make sure that the interrupts are disabled. - * Ensure that we are in little endian mode. - * [psr.{rt, it, dt, i, be} = 0] - * - * 5. Get the physical address corresponding to the virtual address - * of the next instruction bundle and put it in iip. - * (Using magic numbers 24 and 40 in the deposint instruction since - * the IA64_SDK code directly maps to lower 24bits as physical address - * from a virtual address). - * - * 6. Do an rfi to move the values from ipsr to psr and iip to ip. - */ -#define PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \ - mov old_psr = psr; \ - ;; \ - dep old_psr = 0, old_psr, 32, 32; \ - \ - mov ar.rsc = 0 ; \ - ;; \ - srlz.d; \ - mov temp2 = ar.bspstore; \ - ;; \ - DATA_VA_TO_PA(temp2); \ - ;; \ - mov temp1 = ar.rnat; \ - ;; \ - mov ar.bspstore = temp2; \ - ;; \ - mov ar.rnat = temp1; \ - mov temp1 = psr; \ - mov temp2 = psr; \ - ;; \ - \ - dep temp2 = 0, temp2, PSR_IC, 2; \ - ;; \ - mov psr.l = temp2; \ - ;; \ - srlz.d; \ - dep temp1 = 0, temp1, 32, 32; \ - ;; \ - dep temp1 = 0, temp1, PSR_IT, 1; \ - ;; \ - dep temp1 = 0, temp1, PSR_DT, 1; \ - ;; \ - dep temp1 = 0, temp1, PSR_RT, 1; \ - ;; \ - dep temp1 = 0, temp1, PSR_I, 1; \ - ;; \ - dep temp1 = 0, temp1, PSR_IC, 1; \ - ;; \ - dep temp1 = -1, temp1, PSR_MC, 1; \ - ;; \ - mov cr.ipsr = temp1; \ - ;; \ - LOAD_PHYSICAL(p0, temp2, start_addr); \ - ;; \ - mov cr.iip = temp2; \ - mov cr.ifs = r0; \ - DATA_VA_TO_PA(sp); \ - DATA_VA_TO_PA(gp); \ - ;; \ - srlz.i; \ - ;; \ - nop 1; \ - nop 2; \ - nop 1; \ - nop 2; \ - rfi; \ - ;; - -/* - * This macro jumps to the instruction at the given virtual address - * and starts execution in virtual mode with all the address - * translations turned on. - * 1. Get the old saved psr - * - * 2. Clear the interrupt state collection bit in the current psr. - * - * 3. Set the instruction translation bit back in the old psr - * Note we have to do this since we are right now saving only the - * lower 32-bits of old psr.(Also the old psr has the data and - * rse translation bits on) - * - * 4. Set ipsr to this old_psr with "it" bit set and "bn" = 1. - * - * 5. Reset the current thread pointer (r13). - * - * 6. Set iip to the virtual address of the next instruction bundle. - * - * 7. Do an rfi to move ipsr to psr and iip to ip. - */ - -#define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \ - mov temp2 = psr; \ - ;; \ - mov old_psr = temp2; \ - ;; \ - dep temp2 = 0, temp2, PSR_IC, 2; \ - ;; \ - mov psr.l = temp2; \ - mov ar.rsc = 0; \ - ;; \ - srlz.d; \ - mov r13 = ar.k6; \ - mov temp2 = ar.bspstore; \ - ;; \ - DATA_PA_TO_VA(temp2,temp1); \ - ;; \ - mov temp1 = ar.rnat; \ - ;; \ - mov ar.bspstore = temp2; \ - ;; \ - mov ar.rnat = temp1; \ - ;; \ - mov temp1 = old_psr; \ - ;; \ - mov temp2 = 1; \ - ;; \ - dep temp1 = temp2, temp1, PSR_IC, 1; \ - ;; \ - dep temp1 = temp2, temp1, PSR_IT, 1; \ - ;; \ - dep temp1 = temp2, temp1, PSR_DT, 1; \ - ;; \ - dep temp1 = temp2, temp1, PSR_RT, 1; \ - ;; \ - dep temp1 = temp2, temp1, PSR_BN, 1; \ - ;; \ - \ - mov cr.ipsr = temp1; \ - movl temp2 = start_addr; \ - ;; \ - mov cr.iip = temp2; \ - movl gp = __gp \ - ;; \ - DATA_PA_TO_VA(sp, temp1); \ - srlz.i; \ - ;; \ - nop 1; \ - nop 2; \ - nop 1; \ - rfi \ - ;; - -/* - * The MCA and INIT stacks in struct ia64_mca_cpu look like normal kernel - * stacks, except that the SAL/OS state and a switch_stack are stored near the - * top of the MCA/INIT stack. To support concurrent entry to MCA or INIT, as - * well as MCA over INIT, each event needs its own SAL/OS state. All entries - * are 16 byte aligned. - * - * +---------------------------+ - * | pt_regs | - * +---------------------------+ - * | switch_stack | - * +---------------------------+ - * | SAL/OS state | - * +---------------------------+ - * | 16 byte scratch area | - * +---------------------------+ <-------- SP at start of C MCA handler - * | ..... | - * +---------------------------+ - * | RBS for MCA/INIT handler | - * +---------------------------+ - * | struct task for MCA/INIT | - * +---------------------------+ <-------- Bottom of MCA/INIT stack - */ - -#define ALIGN16(x) ((x)&~15) -#define MCA_PT_REGS_OFFSET ALIGN16(KERNEL_STACK_SIZE-IA64_PT_REGS_SIZE) -#define MCA_SWITCH_STACK_OFFSET ALIGN16(MCA_PT_REGS_OFFSET-IA64_SWITCH_STACK_SIZE) -#define MCA_SOS_OFFSET ALIGN16(MCA_SWITCH_STACK_OFFSET-IA64_SAL_OS_STATE_SIZE) -#define MCA_SP_OFFSET ALIGN16(MCA_SOS_OFFSET-16) - -#endif /* _ASM_IA64_MCA_ASM_H */ diff --git a/include/asm-ia64/meminit.h b/include/asm-ia64/meminit.h deleted file mode 100644 index 7245a5781594..000000000000 --- a/include/asm-ia64/meminit.h +++ /dev/null @@ -1,75 +0,0 @@ -#ifndef meminit_h -#define meminit_h - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - - -/* - * Entries defined so far: - * - boot param structure itself - * - memory map - * - initrd (optional) - * - command line string - * - kernel code & data - * - crash dumping code reserved region - * - Kernel memory map built from EFI memory map - * - ELF core header - * - * More could be added if necessary - */ -#define IA64_MAX_RSVD_REGIONS 8 - -struct rsvd_region { - unsigned long start; /* virtual address of beginning of element */ - unsigned long end; /* virtual address of end of element + 1 */ -}; - -extern struct rsvd_region rsvd_region[IA64_MAX_RSVD_REGIONS + 1]; -extern int num_rsvd_regions; - -extern void find_memory (void); -extern void reserve_memory (void); -extern void find_initrd (void); -extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg); -extern int filter_memory (unsigned long start, unsigned long end, void *arg); -extern unsigned long efi_memmap_init(unsigned long *s, unsigned long *e); -extern int find_max_min_low_pfn (unsigned long , unsigned long, void *); - -extern unsigned long vmcore_find_descriptor_size(unsigned long address); -extern int reserve_elfcorehdr(unsigned long *start, unsigned long *end); - -/* - * For rounding an address to the next IA64_GRANULE_SIZE or order - */ -#define GRANULEROUNDDOWN(n) ((n) & ~(IA64_GRANULE_SIZE-1)) -#define GRANULEROUNDUP(n) (((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1)) -#define ORDERROUNDDOWN(n) ((n) & ~((PAGE_SIZE< than this */ - extern unsigned long vmalloc_end; - extern struct page *vmem_map; - extern int find_largest_hole (u64 start, u64 end, void *arg); - extern int create_mem_map_page_table (u64 start, u64 end, void *arg); - extern int vmemmap_find_next_valid_pfn(int, int); -#else -static inline int vmemmap_find_next_valid_pfn(int node, int i) -{ - return i + 1; -} -#endif -#endif /* meminit_h */ diff --git a/include/asm-ia64/mman.h b/include/asm-ia64/mman.h deleted file mode 100644 index c73b87832a1e..000000000000 --- a/include/asm-ia64/mman.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef _ASM_IA64_MMAN_H -#define _ASM_IA64_MMAN_H - -/* - * Based on . - * - * Modified 1998-2000, 2002 - * David Mosberger-Tang , Hewlett-Packard Co - */ - -#include - -#define MAP_GROWSDOWN 0x00100 /* stack-like segment */ -#define MAP_GROWSUP 0x00200 /* register stack-like segment */ -#define MAP_DENYWRITE 0x00800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x01000 /* mark it as an executable */ -#define MAP_LOCKED 0x02000 /* pages are locked */ -#define MAP_NORESERVE 0x04000 /* don't check for reservations */ -#define MAP_POPULATE 0x08000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ -#define arch_mmap_check ia64_mmap_check -int ia64_mmap_check(unsigned long addr, unsigned long len, - unsigned long flags); -#endif -#endif - -#endif /* _ASM_IA64_MMAN_H */ diff --git a/include/asm-ia64/mmu.h b/include/asm-ia64/mmu.h deleted file mode 100644 index 611432ba579c..000000000000 --- a/include/asm-ia64/mmu.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __MMU_H -#define __MMU_H - -/* - * Type for a context number. We declare it volatile to ensure proper - * ordering when it's accessed outside of spinlock'd critical sections - * (e.g., as done in activate_mm() and init_new_context()). - */ -typedef volatile unsigned long mm_context_t; - -typedef unsigned long nv_mm_context_t; - -#endif diff --git a/include/asm-ia64/mmu_context.h b/include/asm-ia64/mmu_context.h deleted file mode 100644 index 040bc87db930..000000000000 --- a/include/asm-ia64/mmu_context.h +++ /dev/null @@ -1,198 +0,0 @@ -#ifndef _ASM_IA64_MMU_CONTEXT_H -#define _ASM_IA64_MMU_CONTEXT_H - -/* - * Copyright (C) 1998-2002 Hewlett-Packard Co - * David Mosberger-Tang - */ - -/* - * Routines to manage the allocation of task context numbers. Task context - * numbers are used to reduce or eliminate the need to perform TLB flushes - * due to context switches. Context numbers are implemented using ia-64 - * region ids. Since the IA-64 TLB does not consider the region number when - * performing a TLB lookup, we need to assign a unique region id to each - * region in a process. We use the least significant three bits in aregion - * id for this purpose. - */ - -#define IA64_REGION_ID_KERNEL 0 /* the kernel's region id (tlb.c depends on this being 0) */ - -#define ia64_rid(ctx,addr) (((ctx) << 3) | (addr >> 61)) - -# include -# ifndef __ASSEMBLY__ - -#include -#include -#include -#include - -#include -#include - -struct ia64_ctx { - spinlock_t lock; - unsigned int next; /* next context number to use */ - unsigned int limit; /* available free range */ - unsigned int max_ctx; /* max. context value supported by all CPUs */ - /* call wrap_mmu_context when next >= max */ - unsigned long *bitmap; /* bitmap size is max_ctx+1 */ - unsigned long *flushmap;/* pending rid to be flushed */ -}; - -extern struct ia64_ctx ia64_ctx; -DECLARE_PER_CPU(u8, ia64_need_tlb_flush); - -extern void mmu_context_init (void); -extern void wrap_mmu_context (struct mm_struct *mm); - -static inline void -enter_lazy_tlb (struct mm_struct *mm, struct task_struct *tsk) -{ -} - -/* - * When the context counter wraps around all TLBs need to be flushed because - * an old context number might have been reused. This is signalled by the - * ia64_need_tlb_flush per-CPU variable, which is checked in the routine - * below. Called by activate_mm(). - */ -static inline void -delayed_tlb_flush (void) -{ - extern void local_flush_tlb_all (void); - unsigned long flags; - - if (unlikely(__ia64_per_cpu_var(ia64_need_tlb_flush))) { - spin_lock_irqsave(&ia64_ctx.lock, flags); - if (__ia64_per_cpu_var(ia64_need_tlb_flush)) { - local_flush_tlb_all(); - __ia64_per_cpu_var(ia64_need_tlb_flush) = 0; - } - spin_unlock_irqrestore(&ia64_ctx.lock, flags); - } -} - -static inline nv_mm_context_t -get_mmu_context (struct mm_struct *mm) -{ - unsigned long flags; - nv_mm_context_t context = mm->context; - - if (likely(context)) - goto out; - - spin_lock_irqsave(&ia64_ctx.lock, flags); - /* re-check, now that we've got the lock: */ - context = mm->context; - if (context == 0) { - cpus_clear(mm->cpu_vm_mask); - if (ia64_ctx.next >= ia64_ctx.limit) { - ia64_ctx.next = find_next_zero_bit(ia64_ctx.bitmap, - ia64_ctx.max_ctx, ia64_ctx.next); - ia64_ctx.limit = find_next_bit(ia64_ctx.bitmap, - ia64_ctx.max_ctx, ia64_ctx.next); - if (ia64_ctx.next >= ia64_ctx.max_ctx) - wrap_mmu_context(mm); - } - mm->context = context = ia64_ctx.next++; - __set_bit(context, ia64_ctx.bitmap); - } - spin_unlock_irqrestore(&ia64_ctx.lock, flags); -out: - /* - * Ensure we're not starting to use "context" before any old - * uses of it are gone from our TLB. - */ - delayed_tlb_flush(); - - return context; -} - -/* - * Initialize context number to some sane value. MM is guaranteed to be a - * brand-new address-space, so no TLB flushing is needed, ever. - */ -static inline int -init_new_context (struct task_struct *p, struct mm_struct *mm) -{ - mm->context = 0; - return 0; -} - -static inline void -destroy_context (struct mm_struct *mm) -{ - /* Nothing to do. */ -} - -static inline void -reload_context (nv_mm_context_t context) -{ - unsigned long rid; - unsigned long rid_incr = 0; - unsigned long rr0, rr1, rr2, rr3, rr4, old_rr4; - - old_rr4 = ia64_get_rr(RGN_BASE(RGN_HPAGE)); - rid = context << 3; /* make space for encoding the region number */ - rid_incr = 1 << 8; - - /* encode the region id, preferred page size, and VHPT enable bit: */ - rr0 = (rid << 8) | (PAGE_SHIFT << 2) | 1; - rr1 = rr0 + 1*rid_incr; - rr2 = rr0 + 2*rid_incr; - rr3 = rr0 + 3*rid_incr; - rr4 = rr0 + 4*rid_incr; -#ifdef CONFIG_HUGETLB_PAGE - rr4 = (rr4 & (~(0xfcUL))) | (old_rr4 & 0xfc); - -# if RGN_HPAGE != 4 -# error "reload_context assumes RGN_HPAGE is 4" -# endif -#endif - - ia64_set_rr0_to_rr4(rr0, rr1, rr2, rr3, rr4); - ia64_srlz_i(); /* srlz.i implies srlz.d */ -} - -/* - * Must be called with preemption off - */ -static inline void -activate_context (struct mm_struct *mm) -{ - nv_mm_context_t context; - - do { - context = get_mmu_context(mm); - if (!cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) - cpu_set(smp_processor_id(), mm->cpu_vm_mask); - reload_context(context); - /* - * in the unlikely event of a TLB-flush by another thread, - * redo the load. - */ - } while (unlikely(context != mm->context)); -} - -#define deactivate_mm(tsk,mm) do { } while (0) - -/* - * Switch from address space PREV to address space NEXT. - */ -static inline void -activate_mm (struct mm_struct *prev, struct mm_struct *next) -{ - /* - * We may get interrupts here, but that's OK because interrupt - * handlers cannot touch user-space. - */ - ia64_set_kr(IA64_KR_PT_BASE, __pa(next->pgd)); - activate_context(next); -} - -#define switch_mm(prev_mm,next_mm,next_task) activate_mm(prev_mm, next_mm) - -# endif /* ! __ASSEMBLY__ */ -#endif /* _ASM_IA64_MMU_CONTEXT_H */ diff --git a/include/asm-ia64/mmzone.h b/include/asm-ia64/mmzone.h deleted file mode 100644 index 34efe88eb849..000000000000 --- a/include/asm-ia64/mmzone.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2000,2003 Silicon Graphics, Inc. All rights reserved. - * Copyright (c) 2002 NEC Corp. - * Copyright (c) 2002 Erich Focht - * Copyright (c) 2002 Kimio Suganuma - */ -#ifndef _ASM_IA64_MMZONE_H -#define _ASM_IA64_MMZONE_H - -#include -#include -#include - -#ifdef CONFIG_NUMA - -static inline int pfn_to_nid(unsigned long pfn) -{ -#ifdef CONFIG_NUMA - extern int paddr_to_nid(unsigned long); - int nid = paddr_to_nid(pfn << PAGE_SHIFT); - if (nid < 0) - return 0; - else - return nid; -#else - return 0; -#endif -} - -#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID -extern int early_pfn_to_nid(unsigned long pfn); -#endif - -#ifdef CONFIG_IA64_DIG /* DIG systems are small */ -# define MAX_PHYSNODE_ID 8 -# define NR_NODE_MEMBLKS (MAX_NUMNODES * 8) -#else /* sn2 is the biggest case, so we use that if !DIG */ -# define MAX_PHYSNODE_ID 2048 -# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4) -#endif - -#else /* CONFIG_NUMA */ -# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4) -#endif /* CONFIG_NUMA */ - -#endif /* _ASM_IA64_MMZONE_H */ diff --git a/include/asm-ia64/module.h b/include/asm-ia64/module.h deleted file mode 100644 index d2da61e4c49b..000000000000 --- a/include/asm-ia64/module.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef _ASM_IA64_MODULE_H -#define _ASM_IA64_MODULE_H - -/* - * IA-64-specific support for kernel module loader. - * - * Copyright (C) 2003 Hewlett-Packard Co - * David Mosberger-Tang - */ - -struct elf64_shdr; /* forward declration */ - -struct mod_arch_specific { - struct elf64_shdr *core_plt; /* core PLT section */ - struct elf64_shdr *init_plt; /* init PLT section */ - struct elf64_shdr *got; /* global offset table */ - struct elf64_shdr *opd; /* official procedure descriptors */ - struct elf64_shdr *unwind; /* unwind-table section */ - unsigned long gp; /* global-pointer for module */ - - void *core_unw_table; /* core unwind-table cookie returned by unwinder */ - void *init_unw_table; /* init unwind-table cookie returned by unwinder */ - unsigned int next_got_entry; /* index of next available got entry */ -}; - -#define Elf_Shdr Elf64_Shdr -#define Elf_Sym Elf64_Sym -#define Elf_Ehdr Elf64_Ehdr - -#define MODULE_PROC_FAMILY "ia64" -#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY \ - "gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__) - -#define ARCH_SHF_SMALL SHF_IA_64_SHORT - -#endif /* _ASM_IA64_MODULE_H */ diff --git a/include/asm-ia64/msgbuf.h b/include/asm-ia64/msgbuf.h deleted file mode 100644 index 6c64c0d2aae1..000000000000 --- a/include/asm-ia64/msgbuf.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _ASM_IA64_MSGBUF_H -#define _ASM_IA64_MSGBUF_H - -/* - * The msqid64_ds structure for IA-64 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 2 miscellaneous 64-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - __kernel_time_t msg_rtime; /* last msgrcv time */ - __kernel_time_t msg_ctime; /* last change time */ - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ASM_IA64_MSGBUF_H */ diff --git a/include/asm-ia64/mutex.h b/include/asm-ia64/mutex.h deleted file mode 100644 index bed73a643a56..000000000000 --- a/include/asm-ia64/mutex.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * ia64 implementation of the mutex fastpath. - * - * Copyright (C) 2006 Ken Chen - * - */ - -#ifndef _ASM_MUTEX_H -#define _ASM_MUTEX_H - -/** - * __mutex_fastpath_lock - try to take the lock by moving the count - * from 1 to a 0 value - * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 - * - * Change the count from 1 to a value lower than 1, and call if - * it wasn't 1 originally. This function MUST leave the value lower than - * 1 even when the "1" assertion wasn't true. - */ -static inline void -__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) -{ - if (unlikely(ia64_fetchadd4_acq(count, -1) != 1)) - fail_fn(count); -} - -/** - * __mutex_fastpath_lock_retval - try to take the lock by moving the count - * from 1 to a 0 value - * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 - * - * Change the count from 1 to a value lower than 1, and call if - * it wasn't 1 originally. This function returns 0 if the fastpath succeeds, - * or anything the slow path function returns. - */ -static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) -{ - if (unlikely(ia64_fetchadd4_acq(count, -1) != 1)) - return fail_fn(count); - return 0; -} - -/** - * __mutex_fastpath_unlock - try to promote the count from 0 to 1 - * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 0 - * - * Try to promote the count from 0 to 1. If it wasn't 0, call . - * In the failure case, this function is allowed to either set the value to - * 1, or to set it to a value lower than 1. - * - * If the implementation sets it to a value of lower than 1, then the - * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs - * to return 0 otherwise. - */ -static inline void -__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *)) -{ - int ret = ia64_fetchadd4_rel(count, 1); - if (unlikely(ret < 0)) - fail_fn(count); -} - -#define __mutex_slowpath_needs_to_unlock() 1 - -/** - * __mutex_fastpath_trylock - try to acquire the mutex, without waiting - * - * @count: pointer of type atomic_t - * @fail_fn: fallback function - * - * Change the count from 1 to a value lower than 1, and return 0 (failure) - * if it wasn't 1 originally, or return 1 (success) otherwise. This function - * MUST leave the value lower than 1 even when the "1" assertion wasn't true. - * Additionally, if the value was < 0 originally, this function must not leave - * it to 0 on failure. - * - * If the architecture has no effective trylock variant, it should call the - * spinlock-based trylock variant unconditionally. - */ -static inline int -__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) -{ - if (cmpxchg_acq(count, 1, 0) == 1) - return 1; - return 0; -} - -#endif diff --git a/include/asm-ia64/native/inst.h b/include/asm-ia64/native/inst.h deleted file mode 100644 index c953a2ca4fce..000000000000 --- a/include/asm-ia64/native/inst.h +++ /dev/null @@ -1,175 +0,0 @@ -/****************************************************************************** - * include/asm-ia64/native/inst.h - * - * Copyright (c) 2008 Isaku Yamahata - * VA Linux Systems Japan K.K. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#define DO_SAVE_MIN IA64_NATIVE_DO_SAVE_MIN - -#define __paravirt_switch_to ia64_native_switch_to -#define __paravirt_leave_syscall ia64_native_leave_syscall -#define __paravirt_work_processed_syscall ia64_native_work_processed_syscall -#define __paravirt_leave_kernel ia64_native_leave_kernel -#define __paravirt_pending_syscall_end ia64_work_pending_syscall_end -#define __paravirt_work_processed_syscall_target \ - ia64_work_processed_syscall - -#ifdef CONFIG_PARAVIRT_GUEST_ASM_CLOBBER_CHECK -# define PARAVIRT_POISON 0xdeadbeefbaadf00d -# define CLOBBER(clob) \ - ;; \ - movl clob = PARAVIRT_POISON; \ - ;; -#else -# define CLOBBER(clob) /* nothing */ -#endif - -#define MOV_FROM_IFA(reg) \ - mov reg = cr.ifa - -#define MOV_FROM_ITIR(reg) \ - mov reg = cr.itir - -#define MOV_FROM_ISR(reg) \ - mov reg = cr.isr - -#define MOV_FROM_IHA(reg) \ - mov reg = cr.iha - -#define MOV_FROM_IPSR(pred, reg) \ -(pred) mov reg = cr.ipsr - -#define MOV_FROM_IIM(reg) \ - mov reg = cr.iim - -#define MOV_FROM_IIP(reg) \ - mov reg = cr.iip - -#define MOV_FROM_IVR(reg, clob) \ - mov reg = cr.ivr \ - CLOBBER(clob) - -#define MOV_FROM_PSR(pred, reg, clob) \ -(pred) mov reg = psr \ - CLOBBER(clob) - -#define MOV_TO_IFA(reg, clob) \ - mov cr.ifa = reg \ - CLOBBER(clob) - -#define MOV_TO_ITIR(pred, reg, clob) \ -(pred) mov cr.itir = reg \ - CLOBBER(clob) - -#define MOV_TO_IHA(pred, reg, clob) \ -(pred) mov cr.iha = reg \ - CLOBBER(clob) - -#define MOV_TO_IPSR(pred, reg, clob) \ -(pred) mov cr.ipsr = reg \ - CLOBBER(clob) - -#define MOV_TO_IFS(pred, reg, clob) \ -(pred) mov cr.ifs = reg \ - CLOBBER(clob) - -#define MOV_TO_IIP(reg, clob) \ - mov cr.iip = reg \ - CLOBBER(clob) - -#define MOV_TO_KR(kr, reg, clob0, clob1) \ - mov IA64_KR(kr) = reg \ - CLOBBER(clob0) \ - CLOBBER(clob1) - -#define ITC_I(pred, reg, clob) \ -(pred) itc.i reg \ - CLOBBER(clob) - -#define ITC_D(pred, reg, clob) \ -(pred) itc.d reg \ - CLOBBER(clob) - -#define ITC_I_AND_D(pred_i, pred_d, reg, clob) \ -(pred_i) itc.i reg; \ -(pred_d) itc.d reg \ - CLOBBER(clob) - -#define THASH(pred, reg0, reg1, clob) \ -(pred) thash reg0 = reg1 \ - CLOBBER(clob) - -#define SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(clob0, clob1) \ - ssm psr.ic | PSR_DEFAULT_BITS \ - CLOBBER(clob0) \ - CLOBBER(clob1) \ - ;; \ - srlz.i /* guarantee that interruption collectin is on */ \ - ;; - -#define SSM_PSR_IC_AND_SRLZ_D(clob0, clob1) \ - ssm psr.ic \ - CLOBBER(clob0) \ - CLOBBER(clob1) \ - ;; \ - srlz.d - -#define RSM_PSR_IC(clob) \ - rsm psr.ic \ - CLOBBER(clob) - -#define SSM_PSR_I(pred, pred_clob, clob) \ -(pred) ssm psr.i \ - CLOBBER(clob) - -#define RSM_PSR_I(pred, clob0, clob1) \ -(pred) rsm psr.i \ - CLOBBER(clob0) \ - CLOBBER(clob1) - -#define RSM_PSR_I_IC(clob0, clob1, clob2) \ - rsm psr.i | psr.ic \ - CLOBBER(clob0) \ - CLOBBER(clob1) \ - CLOBBER(clob2) - -#define RSM_PSR_DT \ - rsm psr.dt - -#define SSM_PSR_DT_AND_SRLZ_I \ - ssm psr.dt \ - ;; \ - srlz.i - -#define BSW_0(clob0, clob1, clob2) \ - bsw.0 \ - CLOBBER(clob0) \ - CLOBBER(clob1) \ - CLOBBER(clob2) - -#define BSW_1(clob0, clob1) \ - bsw.1 \ - CLOBBER(clob0) \ - CLOBBER(clob1) - -#define COVER \ - cover - -#define RFI \ - rfi diff --git a/include/asm-ia64/native/irq.h b/include/asm-ia64/native/irq.h deleted file mode 100644 index efe9ff74a3c4..000000000000 --- a/include/asm-ia64/native/irq.h +++ /dev/null @@ -1,35 +0,0 @@ -/****************************************************************************** - * include/asm-ia64/native/irq.h - * - * Copyright (c) 2008 Isaku Yamahata - * VA Linux Systems Japan K.K. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * moved from linux/include/asm-ia64/irq.h. - */ - -#ifndef _ASM_IA64_NATIVE_IRQ_H -#define _ASM_IA64_NATIVE_IRQ_H - -#define NR_VECTORS 256 - -#if (NR_VECTORS + 32 * NR_CPUS) < 1024 -#define IA64_NATIVE_NR_IRQS (NR_VECTORS + 32 * NR_CPUS) -#else -#define IA64_NATIVE_NR_IRQS 1024 -#endif - -#endif /* _ASM_IA64_NATIVE_IRQ_H */ diff --git a/include/asm-ia64/nodedata.h b/include/asm-ia64/nodedata.h deleted file mode 100644 index 2fb337b0e9b7..000000000000 --- a/include/asm-ia64/nodedata.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2000 Silicon Graphics, Inc. All rights reserved. - * Copyright (c) 2002 NEC Corp. - * Copyright (c) 2002 Erich Focht - * Copyright (c) 2002 Kimio Suganuma - */ -#ifndef _ASM_IA64_NODEDATA_H -#define _ASM_IA64_NODEDATA_H - -#include - -#include -#include - -#ifdef CONFIG_NUMA - -/* - * Node Data. One of these structures is located on each node of a NUMA system. - */ - -struct pglist_data; -struct ia64_node_data { - short active_cpu_count; - short node; - struct pglist_data *pg_data_ptrs[MAX_NUMNODES]; -}; - - -/* - * Return a pointer to the node_data structure for the executing cpu. - */ -#define local_node_data (local_cpu_data->node_data) - -/* - * Given a node id, return a pointer to the pg_data_t for the node. - * - * NODE_DATA - should be used in all code not related to system - * initialization. It uses pernode data structures to minimize - * offnode memory references. However, these structure are not - * present during boot. This macro can be used once cpu_init - * completes. - */ -#define NODE_DATA(nid) (local_node_data->pg_data_ptrs[nid]) - -/* - * LOCAL_DATA_ADDR - This is to calculate the address of other node's - * "local_node_data" at hot-plug phase. The local_node_data - * is pointed by per_cpu_page. Kernel usually use it for - * just executing cpu. However, when new node is hot-added, - * the addresses of local data for other nodes are necessary - * to update all of them. - */ -#define LOCAL_DATA_ADDR(pgdat) \ - ((struct ia64_node_data *)((u64)(pgdat) + \ - L1_CACHE_ALIGN(sizeof(struct pglist_data)))) - -#endif /* CONFIG_NUMA */ - -#endif /* _ASM_IA64_NODEDATA_H */ diff --git a/include/asm-ia64/numa.h b/include/asm-ia64/numa.h deleted file mode 100644 index 3499ff57bf42..000000000000 --- a/include/asm-ia64/numa.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * This file contains NUMA specific prototypes and definitions. - * - * 2002/08/05 Erich Focht - * - */ -#ifndef _ASM_IA64_NUMA_H -#define _ASM_IA64_NUMA_H - - -#ifdef CONFIG_NUMA - -#include -#include -#include -#include -#include - -#include - -#define NUMA_NO_NODE -1 - -extern u16 cpu_to_node_map[NR_CPUS] __cacheline_aligned; -extern cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned; -extern pg_data_t *pgdat_list[MAX_NUMNODES]; - -/* Stuff below this line could be architecture independent */ - -extern int num_node_memblks; /* total number of memory chunks */ - -/* - * List of node memory chunks. Filled when parsing SRAT table to - * obtain information about memory nodes. -*/ - -struct node_memblk_s { - unsigned long start_paddr; - unsigned long size; - int nid; /* which logical node contains this chunk? */ - int bank; /* which mem bank on this node */ -}; - -struct node_cpuid_s { - u16 phys_id; /* id << 8 | eid */ - int nid; /* logical node containing this CPU */ -}; - -extern struct node_memblk_s node_memblk[NR_NODE_MEMBLKS]; -extern struct node_cpuid_s node_cpuid[NR_CPUS]; - -/* - * ACPI 2.0 SLIT (System Locality Information Table) - * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf - * - * This is a matrix with "distances" between nodes, they should be - * proportional to the memory access latency ratios. - */ - -extern u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES]; -#define node_distance(from,to) (numa_slit[(from) * num_online_nodes() + (to)]) - -extern int paddr_to_nid(unsigned long paddr); - -#define local_nodeid (cpu_to_node_map[smp_processor_id()]) - -extern void map_cpu_to_node(int cpu, int nid); -extern void unmap_cpu_from_node(int cpu, int nid); - - -#else /* !CONFIG_NUMA */ -#define map_cpu_to_node(cpu, nid) do{}while(0) -#define unmap_cpu_from_node(cpu, nid) do{}while(0) - -#define paddr_to_nid(addr) 0 - -#endif /* CONFIG_NUMA */ - -#endif /* _ASM_IA64_NUMA_H */ diff --git a/include/asm-ia64/page.h b/include/asm-ia64/page.h deleted file mode 100644 index 5f271bc712ee..000000000000 --- a/include/asm-ia64/page.h +++ /dev/null @@ -1,223 +0,0 @@ -#ifndef _ASM_IA64_PAGE_H -#define _ASM_IA64_PAGE_H -/* - * Pagetable related stuff. - * - * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co - * David Mosberger-Tang - */ - -#include -#include - -/* - * The top three bits of an IA64 address are its Region Number. - * Different regions are assigned to different purposes. - */ -#define RGN_SHIFT (61) -#define RGN_BASE(r) (__IA64_UL_CONST(r)<> PAGE_SHIFT) - -#ifdef CONFIG_VIRTUAL_MEM_MAP -extern int ia64_pfn_valid (unsigned long pfn); -#else -# define ia64_pfn_valid(pfn) 1 -#endif - -#ifdef CONFIG_VIRTUAL_MEM_MAP -extern struct page *vmem_map; -#ifdef CONFIG_DISCONTIGMEM -# define page_to_pfn(page) ((unsigned long) (page - vmem_map)) -# define pfn_to_page(pfn) (vmem_map + (pfn)) -#else -# include -#endif -#else -# include -#endif - -#ifdef CONFIG_FLATMEM -# define pfn_valid(pfn) (((pfn) < max_mapnr) && ia64_pfn_valid(pfn)) -#elif defined(CONFIG_DISCONTIGMEM) -extern unsigned long min_low_pfn; -extern unsigned long max_low_pfn; -# define pfn_valid(pfn) (((pfn) >= min_low_pfn) && ((pfn) < max_low_pfn) && ia64_pfn_valid(pfn)) -#endif - -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) - -typedef union ia64_va { - struct { - unsigned long off : 61; /* intra-region offset */ - unsigned long reg : 3; /* region number */ - } f; - unsigned long l; - void *p; -} ia64_va; - -/* - * Note: These macros depend on the fact that PAGE_OFFSET has all - * region bits set to 1 and all other bits set to zero. They are - * expressed in this way to ensure they result in a single "dep" - * instruction. - */ -#define __pa(x) ({ia64_va _v; _v.l = (long) (x); _v.f.reg = 0; _v.l;}) -#define __va(x) ({ia64_va _v; _v.l = (long) (x); _v.f.reg = -1; _v.p;}) - -#define REGION_NUMBER(x) ({ia64_va _v; _v.l = (long) (x); _v.f.reg;}) -#define REGION_OFFSET(x) ({ia64_va _v; _v.l = (long) (x); _v.f.off;}) - -#ifdef CONFIG_HUGETLB_PAGE -# define htlbpage_to_page(x) (((unsigned long) REGION_NUMBER(x) << 61) \ - | (REGION_OFFSET(x) >> (HPAGE_SHIFT-PAGE_SHIFT))) -# define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) -extern unsigned int hpage_shift; -#endif - -static __inline__ int -get_order (unsigned long size) -{ - long double d = size - 1; - long order; - - order = ia64_getf_exp(d); - order = order - PAGE_SHIFT - 0xffff + 1; - if (order < 0) - order = 0; - return order; -} - -#endif /* !__ASSEMBLY__ */ - -#ifdef STRICT_MM_TYPECHECKS - /* - * These are used to make use of C type-checking.. - */ - typedef struct { unsigned long pte; } pte_t; - typedef struct { unsigned long pmd; } pmd_t; -#ifdef CONFIG_PGTABLE_4 - typedef struct { unsigned long pud; } pud_t; -#endif - typedef struct { unsigned long pgd; } pgd_t; - typedef struct { unsigned long pgprot; } pgprot_t; - typedef struct page *pgtable_t; - -# define pte_val(x) ((x).pte) -# define pmd_val(x) ((x).pmd) -#ifdef CONFIG_PGTABLE_4 -# define pud_val(x) ((x).pud) -#endif -# define pgd_val(x) ((x).pgd) -# define pgprot_val(x) ((x).pgprot) - -# define __pte(x) ((pte_t) { (x) } ) -# define __pgprot(x) ((pgprot_t) { (x) } ) - -#else /* !STRICT_MM_TYPECHECKS */ - /* - * .. while these make it easier on the compiler - */ -# ifndef __ASSEMBLY__ - typedef unsigned long pte_t; - typedef unsigned long pmd_t; - typedef unsigned long pgd_t; - typedef unsigned long pgprot_t; - typedef struct page *pgtable_t; -# endif - -# define pte_val(x) (x) -# define pmd_val(x) (x) -# define pgd_val(x) (x) -# define pgprot_val(x) (x) - -# define __pte(x) (x) -# define __pgd(x) (x) -# define __pgprot(x) (x) -#endif /* !STRICT_MM_TYPECHECKS */ - -#define PAGE_OFFSET RGN_BASE(RGN_KERNEL) - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC | \ - (((current->personality & READ_IMPLIES_EXEC) != 0) \ - ? VM_EXEC : 0)) - -#endif /* _ASM_IA64_PAGE_H */ diff --git a/include/asm-ia64/pal.h b/include/asm-ia64/pal.h deleted file mode 100644 index 67b02901ead4..000000000000 --- a/include/asm-ia64/pal.h +++ /dev/null @@ -1,1827 +0,0 @@ -#ifndef _ASM_IA64_PAL_H -#define _ASM_IA64_PAL_H - -/* - * Processor Abstraction Layer definitions. - * - * This is based on Intel IA-64 Architecture Software Developer's Manual rev 1.0 - * chapter 11 IA-64 Processor Abstraction Layer - * - * Copyright (C) 1998-2001 Hewlett-Packard Co - * David Mosberger-Tang - * Stephane Eranian - * Copyright (C) 1999 VA Linux Systems - * Copyright (C) 1999 Walt Drummond - * Copyright (C) 1999 Srinivasa Prasad Thirumalachar - * Copyright (C) 2008 Silicon Graphics, Inc. (SGI) - * - * 99/10/01 davidm Make sure we pass zero for reserved parameters. - * 00/03/07 davidm Updated pal_cache_flush() to be in sync with PAL v2.6. - * 00/03/23 cfleck Modified processor min-state save area to match updated PAL & SAL info - * 00/05/24 eranian Updated to latest PAL spec, fix structures bugs, added - * 00/05/25 eranian Support for stack calls, and static physical calls - * 00/06/18 eranian Support for stacked physical calls - * 06/10/26 rja Support for Intel Itanium Architecture Software Developer's - * Manual Rev 2.2 (Jan 2006) - */ - -/* - * Note that some of these calls use a static-register only calling - * convention which has nothing to do with the regular calling - * convention. - */ -#define PAL_CACHE_FLUSH 1 /* flush i/d cache */ -#define PAL_CACHE_INFO 2 /* get detailed i/d cache info */ -#define PAL_CACHE_INIT 3 /* initialize i/d cache */ -#define PAL_CACHE_SUMMARY 4 /* get summary of cache hierarchy */ -#define PAL_MEM_ATTRIB 5 /* list supported memory attributes */ -#define PAL_PTCE_INFO 6 /* purge TLB info */ -#define PAL_VM_INFO 7 /* return supported virtual memory features */ -#define PAL_VM_SUMMARY 8 /* return summary on supported vm features */ -#define PAL_BUS_GET_FEATURES 9 /* return processor bus interface features settings */ -#define PAL_BUS_SET_FEATURES 10 /* set processor bus features */ -#define PAL_DEBUG_INFO 11 /* get number of debug registers */ -#define PAL_FIXED_ADDR 12 /* get fixed component of processors's directed address */ -#define PAL_FREQ_BASE 13 /* base frequency of the platform */ -#define PAL_FREQ_RATIOS 14 /* ratio of processor, bus and ITC frequency */ -#define PAL_PERF_MON_INFO 15 /* return performance monitor info */ -#define PAL_PLATFORM_ADDR 16 /* set processor interrupt block and IO port space addr */ -#define PAL_PROC_GET_FEATURES 17 /* get configurable processor features & settings */ -#define PAL_PROC_SET_FEATURES 18 /* enable/disable configurable processor features */ -#define PAL_RSE_INFO 19 /* return rse information */ -#define PAL_VERSION 20 /* return version of PAL code */ -#define PAL_MC_CLEAR_LOG 21 /* clear all processor log info */ -#define PAL_MC_DRAIN 22 /* drain operations which could result in an MCA */ -#define PAL_MC_EXPECTED 23 /* set/reset expected MCA indicator */ -#define PAL_MC_DYNAMIC_STATE 24 /* get processor dynamic state */ -#define PAL_MC_ERROR_INFO 25 /* get processor MCA info and static state */ -#define PAL_MC_RESUME 26 /* Return to interrupted process */ -#define PAL_MC_REGISTER_MEM 27 /* Register memory for PAL to use during MCAs and inits */ -#define PAL_HALT 28 /* enter the low power HALT state */ -#define PAL_HALT_LIGHT 29 /* enter the low power light halt state*/ -#define PAL_COPY_INFO 30 /* returns info needed to relocate PAL */ -#define PAL_CACHE_LINE_INIT 31 /* init tags & data of cache line */ -#define PAL_PMI_ENTRYPOINT 32 /* register PMI memory entry points with the processor */ -#define PAL_ENTER_IA_32_ENV 33 /* enter IA-32 system environment */ -#define PAL_VM_PAGE_SIZE 34 /* return vm TC and page walker page sizes */ - -#define PAL_MEM_FOR_TEST 37 /* get amount of memory needed for late processor test */ -#define PAL_CACHE_PROT_INFO 38 /* get i/d cache protection info */ -#define PAL_REGISTER_INFO 39 /* return AR and CR register information*/ -#define PAL_SHUTDOWN 40 /* enter processor shutdown state */ -#define PAL_PREFETCH_VISIBILITY 41 /* Make Processor Prefetches Visible */ -#define PAL_LOGICAL_TO_PHYSICAL 42 /* returns information on logical to physical processor mapping */ -#define PAL_CACHE_SHARED_INFO 43 /* returns information on caches shared by logical processor */ -#define PAL_GET_HW_POLICY 48 /* Get current hardware resource sharing policy */ -#define PAL_SET_HW_POLICY 49 /* Set current hardware resource sharing policy */ -#define PAL_VP_INFO 50 /* Information about virtual processor features */ -#define PAL_MC_HW_TRACKING 51 /* Hardware tracking status */ - -#define PAL_COPY_PAL 256 /* relocate PAL procedures and PAL PMI */ -#define PAL_HALT_INFO 257 /* return the low power capabilities of processor */ -#define PAL_TEST_PROC 258 /* perform late processor self-test */ -#define PAL_CACHE_READ 259 /* read tag & data of cacheline for diagnostic testing */ -#define PAL_CACHE_WRITE 260 /* write tag & data of cacheline for diagnostic testing */ -#define PAL_VM_TR_READ 261 /* read contents of translation register */ -#define PAL_GET_PSTATE 262 /* get the current P-state */ -#define PAL_SET_PSTATE 263 /* set the P-state */ -#define PAL_BRAND_INFO 274 /* Processor branding information */ - -#define PAL_GET_PSTATE_TYPE_LASTSET 0 -#define PAL_GET_PSTATE_TYPE_AVGANDRESET 1 -#define PAL_GET_PSTATE_TYPE_AVGNORESET 2 -#define PAL_GET_PSTATE_TYPE_INSTANT 3 - -#define PAL_MC_ERROR_INJECT 276 /* Injects processor error or returns injection capabilities */ - -#ifndef __ASSEMBLY__ - -#include -#include - -/* - * Data types needed to pass information into PAL procedures and - * interpret information returned by them. - */ - -/* Return status from the PAL procedure */ -typedef s64 pal_status_t; - -#define PAL_STATUS_SUCCESS 0 /* No error */ -#define PAL_STATUS_UNIMPLEMENTED (-1) /* Unimplemented procedure */ -#define PAL_STATUS_EINVAL (-2) /* Invalid argument */ -#define PAL_STATUS_ERROR (-3) /* Error */ -#define PAL_STATUS_CACHE_INIT_FAIL (-4) /* Could not initialize the - * specified level and type of - * cache without sideeffects - * and "restrict" was 1 - */ -#define PAL_STATUS_REQUIRES_MEMORY (-9) /* Call requires PAL memory buffer */ - -/* Processor cache level in the hierarchy */ -typedef u64 pal_cache_level_t; -#define PAL_CACHE_LEVEL_L0 0 /* L0 */ -#define PAL_CACHE_LEVEL_L1 1 /* L1 */ -#define PAL_CACHE_LEVEL_L2 2 /* L2 */ - - -/* Processor cache type at a particular level in the hierarchy */ - -typedef u64 pal_cache_type_t; -#define PAL_CACHE_TYPE_INSTRUCTION 1 /* Instruction cache */ -#define PAL_CACHE_TYPE_DATA 2 /* Data or unified cache */ -#define PAL_CACHE_TYPE_INSTRUCTION_DATA 3 /* Both Data & Instruction */ - - -#define PAL_CACHE_FLUSH_INVALIDATE 1 /* Invalidate clean lines */ -#define PAL_CACHE_FLUSH_CHK_INTRS 2 /* check for interrupts/mc while flushing */ - -/* Processor cache line size in bytes */ -typedef int pal_cache_line_size_t; - -/* Processor cache line state */ -typedef u64 pal_cache_line_state_t; -#define PAL_CACHE_LINE_STATE_INVALID 0 /* Invalid */ -#define PAL_CACHE_LINE_STATE_SHARED 1 /* Shared */ -#define PAL_CACHE_LINE_STATE_EXCLUSIVE 2 /* Exclusive */ -#define PAL_CACHE_LINE_STATE_MODIFIED 3 /* Modified */ - -typedef struct pal_freq_ratio { - u32 den, num; /* numerator & denominator */ -} itc_ratio, proc_ratio; - -typedef union pal_cache_config_info_1_s { - struct { - u64 u : 1, /* 0 Unified cache ? */ - at : 2, /* 2-1 Cache mem attr*/ - reserved : 5, /* 7-3 Reserved */ - associativity : 8, /* 16-8 Associativity*/ - line_size : 8, /* 23-17 Line size */ - stride : 8, /* 31-24 Stride */ - store_latency : 8, /*39-32 Store latency*/ - load_latency : 8, /* 47-40 Load latency*/ - store_hints : 8, /* 55-48 Store hints*/ - load_hints : 8; /* 63-56 Load hints */ - } pcci1_bits; - u64 pcci1_data; -} pal_cache_config_info_1_t; - -typedef union pal_cache_config_info_2_s { - struct { - u32 cache_size; /*cache size in bytes*/ - - - u32 alias_boundary : 8, /* 39-32 aliased addr - * separation for max - * performance. - */ - tag_ls_bit : 8, /* 47-40 LSb of addr*/ - tag_ms_bit : 8, /* 55-48 MSb of addr*/ - reserved : 8; /* 63-56 Reserved */ - } pcci2_bits; - u64 pcci2_data; -} pal_cache_config_info_2_t; - - -typedef struct pal_cache_config_info_s { - pal_status_t pcci_status; - pal_cache_config_info_1_t pcci_info_1; - pal_cache_config_info_2_t pcci_info_2; - u64 pcci_reserved; -} pal_cache_config_info_t; - -#define pcci_ld_hints pcci_info_1.pcci1_bits.load_hints -#define pcci_st_hints pcci_info_1.pcci1_bits.store_hints -#define pcci_ld_latency pcci_info_1.pcci1_bits.load_latency -#define pcci_st_latency pcci_info_1.pcci1_bits.store_latency -#define pcci_stride pcci_info_1.pcci1_bits.stride -#define pcci_line_size pcci_info_1.pcci1_bits.line_size -#define pcci_assoc pcci_info_1.pcci1_bits.associativity -#define pcci_cache_attr pcci_info_1.pcci1_bits.at -#define pcci_unified pcci_info_1.pcci1_bits.u -#define pcci_tag_msb pcci_info_2.pcci2_bits.tag_ms_bit -#define pcci_tag_lsb pcci_info_2.pcci2_bits.tag_ls_bit -#define pcci_alias_boundary pcci_info_2.pcci2_bits.alias_boundary -#define pcci_cache_size pcci_info_2.pcci2_bits.cache_size - - - -/* Possible values for cache attributes */ - -#define PAL_CACHE_ATTR_WT 0 /* Write through cache */ -#define PAL_CACHE_ATTR_WB 1 /* Write back cache */ -#define PAL_CACHE_ATTR_WT_OR_WB 2 /* Either write thru or write - * back depending on TLB - * memory attributes - */ - - -/* Possible values for cache hints */ - -#define PAL_CACHE_HINT_TEMP_1 0 /* Temporal level 1 */ -#define PAL_CACHE_HINT_NTEMP_1 1 /* Non-temporal level 1 */ -#define PAL_CACHE_HINT_NTEMP_ALL 3 /* Non-temporal all levels */ - -/* Processor cache protection information */ -typedef union pal_cache_protection_element_u { - u32 pcpi_data; - struct { - u32 data_bits : 8, /* # data bits covered by - * each unit of protection - */ - - tagprot_lsb : 6, /* Least -do- */ - tagprot_msb : 6, /* Most Sig. tag address - * bit that this - * protection covers. - */ - prot_bits : 6, /* # of protection bits */ - method : 4, /* Protection method */ - t_d : 2; /* Indicates which part - * of the cache this - * protection encoding - * applies. - */ - } pcp_info; -} pal_cache_protection_element_t; - -#define pcpi_cache_prot_part pcp_info.t_d -#define pcpi_prot_method pcp_info.method -#define pcpi_prot_bits pcp_info.prot_bits -#define pcpi_tagprot_msb pcp_info.tagprot_msb -#define pcpi_tagprot_lsb pcp_info.tagprot_lsb -#define pcpi_data_bits pcp_info.data_bits - -/* Processor cache part encodings */ -#define PAL_CACHE_PROT_PART_DATA 0 /* Data protection */ -#define PAL_CACHE_PROT_PART_TAG 1 /* Tag protection */ -#define PAL_CACHE_PROT_PART_TAG_DATA 2 /* Tag+data protection (tag is - * more significant ) - */ -#define PAL_CACHE_PROT_PART_DATA_TAG 3 /* Data+tag protection (data is - * more significant ) - */ -#define PAL_CACHE_PROT_PART_MAX 6 - - -typedef struct pal_cache_protection_info_s { - pal_status_t pcpi_status; - pal_cache_protection_element_t pcp_info[PAL_CACHE_PROT_PART_MAX]; -} pal_cache_protection_info_t; - - -/* Processor cache protection method encodings */ -#define PAL_CACHE_PROT_METHOD_NONE 0 /* No protection */ -#define PAL_CACHE_PROT_METHOD_ODD_PARITY 1 /* Odd parity */ -#define PAL_CACHE_PROT_METHOD_EVEN_PARITY 2 /* Even parity */ -#define PAL_CACHE_PROT_METHOD_ECC 3 /* ECC protection */ - - -/* Processor cache line identification in the hierarchy */ -typedef union pal_cache_line_id_u { - u64 pclid_data; - struct { - u64 cache_type : 8, /* 7-0 cache type */ - level : 8, /* 15-8 level of the - * cache in the - * hierarchy. - */ - way : 8, /* 23-16 way in the set - */ - part : 8, /* 31-24 part of the - * cache - */ - reserved : 32; /* 63-32 is reserved*/ - } pclid_info_read; - struct { - u64 cache_type : 8, /* 7-0 cache type */ - level : 8, /* 15-8 level of the - * cache in the - * hierarchy. - */ - way : 8, /* 23-16 way in the set - */ - part : 8, /* 31-24 part of the - * cache - */ - mesi : 8, /* 39-32 cache line - * state - */ - start : 8, /* 47-40 lsb of data to - * invert - */ - length : 8, /* 55-48 #bits to - * invert - */ - trigger : 8; /* 63-56 Trigger error - * by doing a load - * after the write - */ - - } pclid_info_write; -} pal_cache_line_id_u_t; - -#define pclid_read_part pclid_info_read.part -#define pclid_read_way pclid_info_read.way -#define pclid_read_level pclid_info_read.level -#define pclid_read_cache_type pclid_info_read.cache_type - -#define pclid_write_trigger pclid_info_write.trigger -#define pclid_write_length pclid_info_write.length -#define pclid_write_start pclid_info_write.start -#define pclid_write_mesi pclid_info_write.mesi -#define pclid_write_part pclid_info_write.part -#define pclid_write_way pclid_info_write.way -#define pclid_write_level pclid_info_write.level -#define pclid_write_cache_type pclid_info_write.cache_type - -/* Processor cache line part encodings */ -#define PAL_CACHE_LINE_ID_PART_DATA 0 /* Data */ -#define PAL_CACHE_LINE_ID_PART_TAG 1 /* Tag */ -#define PAL_CACHE_LINE_ID_PART_DATA_PROT 2 /* Data protection */ -#define PAL_CACHE_LINE_ID_PART_TAG_PROT 3 /* Tag protection */ -#define PAL_CACHE_LINE_ID_PART_DATA_TAG_PROT 4 /* Data+tag - * protection - */ -typedef struct pal_cache_line_info_s { - pal_status_t pcli_status; /* Return status of the read cache line - * info call. - */ - u64 pcli_data; /* 64-bit data, tag, protection bits .. */ - u64 pcli_data_len; /* data length in bits */ - pal_cache_line_state_t pcli_cache_line_state; /* mesi state */ - -} pal_cache_line_info_t; - - -/* Machine Check related crap */ - -/* Pending event status bits */ -typedef u64 pal_mc_pending_events_t; - -#define PAL_MC_PENDING_MCA (1 << 0) -#define PAL_MC_PENDING_INIT (1 << 1) - -/* Error information type */ -typedef u64 pal_mc_info_index_t; - -#define PAL_MC_INFO_PROCESSOR 0 /* Processor */ -#define PAL_MC_INFO_CACHE_CHECK 1 /* Cache check */ -#define PAL_MC_INFO_TLB_CHECK 2 /* Tlb check */ -#define PAL_MC_INFO_BUS_CHECK 3 /* Bus check */ -#define PAL_MC_INFO_REQ_ADDR 4 /* Requestor address */ -#define PAL_MC_INFO_RESP_ADDR 5 /* Responder address */ -#define PAL_MC_INFO_TARGET_ADDR 6 /* Target address */ -#define PAL_MC_INFO_IMPL_DEP 7 /* Implementation - * dependent - */ - -#define PAL_TLB_CHECK_OP_PURGE 8 - -typedef struct pal_process_state_info_s { - u64 reserved1 : 2, - rz : 1, /* PAL_CHECK processor - * rendezvous - * successful. - */ - - ra : 1, /* PAL_CHECK attempted - * a rendezvous. - */ - me : 1, /* Distinct multiple - * errors occurred - */ - - mn : 1, /* Min. state save - * area has been - * registered with PAL - */ - - sy : 1, /* Storage integrity - * synched - */ - - - co : 1, /* Continuable */ - ci : 1, /* MC isolated */ - us : 1, /* Uncontained storage - * damage. - */ - - - hd : 1, /* Non-essential hw - * lost (no loss of - * functionality) - * causing the - * processor to run in - * degraded mode. - */ - - tl : 1, /* 1 => MC occurred - * after an instr was - * executed but before - * the trap that - * resulted from instr - * execution was - * generated. - * (Trap Lost ) - */ - mi : 1, /* More information available - * call PAL_MC_ERROR_INFO - */ - pi : 1, /* Precise instruction pointer */ - pm : 1, /* Precise min-state save area */ - - dy : 1, /* Processor dynamic - * state valid - */ - - - in : 1, /* 0 = MC, 1 = INIT */ - rs : 1, /* RSE valid */ - cm : 1, /* MC corrected */ - ex : 1, /* MC is expected */ - cr : 1, /* Control regs valid*/ - pc : 1, /* Perf cntrs valid */ - dr : 1, /* Debug regs valid */ - tr : 1, /* Translation regs - * valid - */ - rr : 1, /* Region regs valid */ - ar : 1, /* App regs valid */ - br : 1, /* Branch regs valid */ - pr : 1, /* Predicate registers - * valid - */ - - fp : 1, /* fp registers valid*/ - b1 : 1, /* Preserved bank one - * general registers - * are valid - */ - b0 : 1, /* Preserved bank zero - * general registers - * are valid - */ - gr : 1, /* General registers - * are valid - * (excl. banked regs) - */ - dsize : 16, /* size of dynamic - * state returned - * by the processor - */ - - se : 1, /* Shared error. MCA in a - shared structure */ - reserved2 : 10, - cc : 1, /* Cache check */ - tc : 1, /* TLB check */ - bc : 1, /* Bus check */ - rc : 1, /* Register file check */ - uc : 1; /* Uarch check */ - -} pal_processor_state_info_t; - -typedef struct pal_cache_check_info_s { - u64 op : 4, /* Type of cache - * operation that - * caused the machine - * check. - */ - level : 2, /* Cache level */ - reserved1 : 2, - dl : 1, /* Failure in data part - * of cache line - */ - tl : 1, /* Failure in tag part - * of cache line - */ - dc : 1, /* Failure in dcache */ - ic : 1, /* Failure in icache */ - mesi : 3, /* Cache line state */ - mv : 1, /* mesi valid */ - way : 5, /* Way in which the - * error occurred - */ - wiv : 1, /* Way field valid */ - reserved2 : 1, - dp : 1, /* Data poisoned on MBE */ - reserved3 : 6, - hlth : 2, /* Health indicator */ - - index : 20, /* Cache line index */ - reserved4 : 2, - - is : 1, /* instruction set (1 == ia32) */ - iv : 1, /* instruction set field valid */ - pl : 2, /* privilege level */ - pv : 1, /* privilege level field valid */ - mcc : 1, /* Machine check corrected */ - tv : 1, /* Target address - * structure is valid - */ - rq : 1, /* Requester identifier - * structure is valid - */ - rp : 1, /* Responder identifier - * structure is valid - */ - pi : 1; /* Precise instruction pointer - * structure is valid - */ -} pal_cache_check_info_t; - -typedef struct pal_tlb_check_info_s { - - u64 tr_slot : 8, /* Slot# of TR where - * error occurred - */ - trv : 1, /* tr_slot field is valid */ - reserved1 : 1, - level : 2, /* TLB level where failure occurred */ - reserved2 : 4, - dtr : 1, /* Fail in data TR */ - itr : 1, /* Fail in inst TR */ - dtc : 1, /* Fail in data TC */ - itc : 1, /* Fail in inst. TC */ - op : 4, /* Cache operation */ - reserved3 : 6, - hlth : 2, /* Health indicator */ - reserved4 : 22, - - is : 1, /* instruction set (1 == ia32) */ - iv : 1, /* instruction set field valid */ - pl : 2, /* privilege level */ - pv : 1, /* privilege level field valid */ - mcc : 1, /* Machine check corrected */ - tv : 1, /* Target address - * structure is valid - */ - rq : 1, /* Requester identifier - * structure is valid - */ - rp : 1, /* Responder identifier - * structure is valid - */ - pi : 1; /* Precise instruction pointer - * structure is valid - */ -} pal_tlb_check_info_t; - -typedef struct pal_bus_check_info_s { - u64 size : 5, /* Xaction size */ - ib : 1, /* Internal bus error */ - eb : 1, /* External bus error */ - cc : 1, /* Error occurred - * during cache-cache - * transfer. - */ - type : 8, /* Bus xaction type*/ - sev : 5, /* Bus error severity*/ - hier : 2, /* Bus hierarchy level */ - dp : 1, /* Data poisoned on MBE */ - bsi : 8, /* Bus error status - * info - */ - reserved2 : 22, - - is : 1, /* instruction set (1 == ia32) */ - iv : 1, /* instruction set field valid */ - pl : 2, /* privilege level */ - pv : 1, /* privilege level field valid */ - mcc : 1, /* Machine check corrected */ - tv : 1, /* Target address - * structure is valid - */ - rq : 1, /* Requester identifier - * structure is valid - */ - rp : 1, /* Responder identifier - * structure is valid - */ - pi : 1; /* Precise instruction pointer - * structure is valid - */ -} pal_bus_check_info_t; - -typedef struct pal_reg_file_check_info_s { - u64 id : 4, /* Register file identifier */ - op : 4, /* Type of register - * operation that - * caused the machine - * check. - */ - reg_num : 7, /* Register number */ - rnv : 1, /* reg_num valid */ - reserved2 : 38, - - is : 1, /* instruction set (1 == ia32) */ - iv : 1, /* instruction set field valid */ - pl : 2, /* privilege level */ - pv : 1, /* privilege level field valid */ - mcc : 1, /* Machine check corrected */ - reserved3 : 3, - pi : 1; /* Precise instruction pointer - * structure is valid - */ -} pal_reg_file_check_info_t; - -typedef struct pal_uarch_check_info_s { - u64 sid : 5, /* Structure identification */ - level : 3, /* Level of failure */ - array_id : 4, /* Array identification */ - op : 4, /* Type of - * operation that - * caused the machine - * check. - */ - way : 6, /* Way of structure */ - wv : 1, /* way valid */ - xv : 1, /* index valid */ - reserved1 : 6, - hlth : 2, /* Health indicator */ - index : 8, /* Index or set of the uarch - * structure that failed. - */ - reserved2 : 24, - - is : 1, /* instruction set (1 == ia32) */ - iv : 1, /* instruction set field valid */ - pl : 2, /* privilege level */ - pv : 1, /* privilege level field valid */ - mcc : 1, /* Machine check corrected */ - tv : 1, /* Target address - * structure is valid - */ - rq : 1, /* Requester identifier - * structure is valid - */ - rp : 1, /* Responder identifier - * structure is valid - */ - pi : 1; /* Precise instruction pointer - * structure is valid - */ -} pal_uarch_check_info_t; - -typedef union pal_mc_error_info_u { - u64 pmei_data; - pal_processor_state_info_t pme_processor; - pal_cache_check_info_t pme_cache; - pal_tlb_check_info_t pme_tlb; - pal_bus_check_info_t pme_bus; - pal_reg_file_check_info_t pme_reg_file; - pal_uarch_check_info_t pme_uarch; -} pal_mc_error_info_t; - -#define pmci_proc_unknown_check pme_processor.uc -#define pmci_proc_bus_check pme_processor.bc -#define pmci_proc_tlb_check pme_processor.tc -#define pmci_proc_cache_check pme_processor.cc -#define pmci_proc_dynamic_state_size pme_processor.dsize -#define pmci_proc_gpr_valid pme_processor.gr -#define pmci_proc_preserved_bank0_gpr_valid pme_processor.b0 -#define pmci_proc_preserved_bank1_gpr_valid pme_processor.b1 -#define pmci_proc_fp_valid pme_processor.fp -#define pmci_proc_predicate_regs_valid pme_processor.pr -#define pmci_proc_branch_regs_valid pme_processor.br -#define pmci_proc_app_regs_valid pme_processor.ar -#define pmci_proc_region_regs_valid pme_processor.rr -#define pmci_proc_translation_regs_valid pme_processor.tr -#define pmci_proc_debug_regs_valid pme_processor.dr -#define pmci_proc_perf_counters_valid pme_processor.pc -#define pmci_proc_control_regs_valid pme_processor.cr -#define pmci_proc_machine_check_expected pme_processor.ex -#define pmci_proc_machine_check_corrected pme_processor.cm -#define pmci_proc_rse_valid pme_processor.rs -#define pmci_proc_machine_check_or_init pme_processor.in -#define pmci_proc_dynamic_state_valid pme_processor.dy -#define pmci_proc_operation pme_processor.op -#define pmci_proc_trap_lost pme_processor.tl -#define pmci_proc_hardware_damage pme_processor.hd -#define pmci_proc_uncontained_storage_damage pme_processor.us -#define pmci_proc_machine_check_isolated pme_processor.ci -#define pmci_proc_continuable pme_processor.co -#define pmci_proc_storage_intergrity_synced pme_processor.sy -#define pmci_proc_min_state_save_area_regd pme_processor.mn -#define pmci_proc_distinct_multiple_errors pme_processor.me -#define pmci_proc_pal_attempted_rendezvous pme_processor.ra -#define pmci_proc_pal_rendezvous_complete pme_processor.rz - - -#define pmci_cache_level pme_cache.level -#define pmci_cache_line_state pme_cache.mesi -#define pmci_cache_line_state_valid pme_cache.mv -#define pmci_cache_line_index pme_cache.index -#define pmci_cache_instr_cache_fail pme_cache.ic -#define pmci_cache_data_cache_fail pme_cache.dc -#define pmci_cache_line_tag_fail pme_cache.tl -#define pmci_cache_line_data_fail pme_cache.dl -#define pmci_cache_operation pme_cache.op -#define pmci_cache_way_valid pme_cache.wv -#define pmci_cache_target_address_valid pme_cache.tv -#define pmci_cache_way pme_cache.way -#define pmci_cache_mc pme_cache.mc - -#define pmci_tlb_instr_translation_cache_fail pme_tlb.itc -#define pmci_tlb_data_translation_cache_fail pme_tlb.dtc -#define pmci_tlb_instr_translation_reg_fail pme_tlb.itr -#define pmci_tlb_data_translation_reg_fail pme_tlb.dtr -#define pmci_tlb_translation_reg_slot pme_tlb.tr_slot -#define pmci_tlb_mc pme_tlb.mc - -#define pmci_bus_status_info pme_bus.bsi -#define pmci_bus_req_address_valid pme_bus.rq -#define pmci_bus_resp_address_valid pme_bus.rp -#define pmci_bus_target_address_valid pme_bus.tv -#define pmci_bus_error_severity pme_bus.sev -#define pmci_bus_transaction_type pme_bus.type -#define pmci_bus_cache_cache_transfer pme_bus.cc -#define pmci_bus_transaction_size pme_bus.size -#define pmci_bus_internal_error pme_bus.ib -#define pmci_bus_external_error pme_bus.eb -#define pmci_bus_mc pme_bus.mc - -/* - * NOTE: this min_state_save area struct only includes the 1KB - * architectural state save area. The other 3 KB is scratch space - * for PAL. - */ - -typedef struct pal_min_state_area_s { - u64 pmsa_nat_bits; /* nat bits for saved GRs */ - u64 pmsa_gr[15]; /* GR1 - GR15 */ - u64 pmsa_bank0_gr[16]; /* GR16 - GR31 */ - u64 pmsa_bank1_gr[16]; /* GR16 - GR31 */ - u64 pmsa_pr; /* predicate registers */ - u64 pmsa_br0; /* branch register 0 */ - u64 pmsa_rsc; /* ar.rsc */ - u64 pmsa_iip; /* cr.iip */ - u64 pmsa_ipsr; /* cr.ipsr */ - u64 pmsa_ifs; /* cr.ifs */ - u64 pmsa_xip; /* previous iip */ - u64 pmsa_xpsr; /* previous psr */ - u64 pmsa_xfs; /* previous ifs */ - u64 pmsa_br1; /* branch register 1 */ - u64 pmsa_reserved[70]; /* pal_min_state_area should total to 1KB */ -} pal_min_state_area_t; - - -struct ia64_pal_retval { - /* - * A zero status value indicates call completed without error. - * A negative status value indicates reason of call failure. - * A positive status value indicates success but an - * informational value should be printed (e.g., "reboot for - * change to take effect"). - */ - s64 status; - u64 v0; - u64 v1; - u64 v2; -}; - -/* - * Note: Currently unused PAL arguments are generally labeled - * "reserved" so the value specified in the PAL documentation - * (generally 0) MUST be passed. Reserved parameters are not optional - * parameters. - */ -extern struct ia64_pal_retval ia64_pal_call_static (u64, u64, u64, u64); -extern struct ia64_pal_retval ia64_pal_call_stacked (u64, u64, u64, u64); -extern struct ia64_pal_retval ia64_pal_call_phys_static (u64, u64, u64, u64); -extern struct ia64_pal_retval ia64_pal_call_phys_stacked (u64, u64, u64, u64); -extern void ia64_save_scratch_fpregs (struct ia64_fpreg *); -extern void ia64_load_scratch_fpregs (struct ia64_fpreg *); - -#define PAL_CALL(iprv,a0,a1,a2,a3) do { \ - struct ia64_fpreg fr[6]; \ - ia64_save_scratch_fpregs(fr); \ - iprv = ia64_pal_call_static(a0, a1, a2, a3); \ - ia64_load_scratch_fpregs(fr); \ -} while (0) - -#define PAL_CALL_STK(iprv,a0,a1,a2,a3) do { \ - struct ia64_fpreg fr[6]; \ - ia64_save_scratch_fpregs(fr); \ - iprv = ia64_pal_call_stacked(a0, a1, a2, a3); \ - ia64_load_scratch_fpregs(fr); \ -} while (0) - -#define PAL_CALL_PHYS(iprv,a0,a1,a2,a3) do { \ - struct ia64_fpreg fr[6]; \ - ia64_save_scratch_fpregs(fr); \ - iprv = ia64_pal_call_phys_static(a0, a1, a2, a3); \ - ia64_load_scratch_fpregs(fr); \ -} while (0) - -#define PAL_CALL_PHYS_STK(iprv,a0,a1,a2,a3) do { \ - struct ia64_fpreg fr[6]; \ - ia64_save_scratch_fpregs(fr); \ - iprv = ia64_pal_call_phys_stacked(a0, a1, a2, a3); \ - ia64_load_scratch_fpregs(fr); \ -} while (0) - -typedef int (*ia64_pal_handler) (u64, ...); -extern ia64_pal_handler ia64_pal; -extern void ia64_pal_handler_init (void *); - -extern ia64_pal_handler ia64_pal; - -extern pal_cache_config_info_t l0d_cache_config_info; -extern pal_cache_config_info_t l0i_cache_config_info; -extern pal_cache_config_info_t l1_cache_config_info; -extern pal_cache_config_info_t l2_cache_config_info; - -extern pal_cache_protection_info_t l0d_cache_protection_info; -extern pal_cache_protection_info_t l0i_cache_protection_info; -extern pal_cache_protection_info_t l1_cache_protection_info; -extern pal_cache_protection_info_t l2_cache_protection_info; - -extern pal_cache_config_info_t pal_cache_config_info_get(pal_cache_level_t, - pal_cache_type_t); - -extern pal_cache_protection_info_t pal_cache_protection_info_get(pal_cache_level_t, - pal_cache_type_t); - - -extern void pal_error(int); - - -/* Useful wrappers for the current list of pal procedures */ - -typedef union pal_bus_features_u { - u64 pal_bus_features_val; - struct { - u64 pbf_reserved1 : 29; - u64 pbf_req_bus_parking : 1; - u64 pbf_bus_lock_mask : 1; - u64 pbf_enable_half_xfer_rate : 1; - u64 pbf_reserved2 : 20; - u64 pbf_enable_shared_line_replace : 1; - u64 pbf_enable_exclusive_line_replace : 1; - u64 pbf_disable_xaction_queueing : 1; - u64 pbf_disable_resp_err_check : 1; - u64 pbf_disable_berr_check : 1; - u64 pbf_disable_bus_req_internal_err_signal : 1; - u64 pbf_disable_bus_req_berr_signal : 1; - u64 pbf_disable_bus_init_event_check : 1; - u64 pbf_disable_bus_init_event_signal : 1; - u64 pbf_disable_bus_addr_err_check : 1; - u64 pbf_disable_bus_addr_err_signal : 1; - u64 pbf_disable_bus_data_err_check : 1; - } pal_bus_features_s; -} pal_bus_features_u_t; - -extern void pal_bus_features_print (u64); - -/* Provide information about configurable processor bus features */ -static inline s64 -ia64_pal_bus_get_features (pal_bus_features_u_t *features_avail, - pal_bus_features_u_t *features_status, - pal_bus_features_u_t *features_control) -{ - struct ia64_pal_retval iprv; - PAL_CALL_PHYS(iprv, PAL_BUS_GET_FEATURES, 0, 0, 0); - if (features_avail) - features_avail->pal_bus_features_val = iprv.v0; - if (features_status) - features_status->pal_bus_features_val = iprv.v1; - if (features_control) - features_control->pal_bus_features_val = iprv.v2; - return iprv.status; -} - -/* Enables/disables specific processor bus features */ -static inline s64 -ia64_pal_bus_set_features (pal_bus_features_u_t feature_select) -{ - struct ia64_pal_retval iprv; - PAL_CALL_PHYS(iprv, PAL_BUS_SET_FEATURES, feature_select.pal_bus_features_val, 0, 0); - return iprv.status; -} - -/* Get detailed cache information */ -static inline s64 -ia64_pal_cache_config_info (u64 cache_level, u64 cache_type, pal_cache_config_info_t *conf) -{ - struct ia64_pal_retval iprv; - - PAL_CALL(iprv, PAL_CACHE_INFO, cache_level, cache_type, 0); - - if (iprv.status == 0) { - conf->pcci_status = iprv.status; - conf->pcci_info_1.pcci1_data = iprv.v0; - conf->pcci_info_2.pcci2_data = iprv.v1; - conf->pcci_reserved = iprv.v2; - } - return iprv.status; - -} - -/* Get detailed cche protection information */ -static inline s64 -ia64_pal_cache_prot_info (u64 cache_level, u64 cache_type, pal_cache_protection_info_t *prot) -{ - struct ia64_pal_retval iprv; - - PAL_CALL(iprv, PAL_CACHE_PROT_INFO, cache_level, cache_type, 0); - - if (iprv.status == 0) { - prot->pcpi_status = iprv.status; - prot->pcp_info[0].pcpi_data = iprv.v0 & 0xffffffff; - prot->pcp_info[1].pcpi_data = iprv.v0 >> 32; - prot->pcp_info[2].pcpi_data = iprv.v1 & 0xffffffff; - prot->pcp_info[3].pcpi_data = iprv.v1 >> 32; - prot->pcp_info[4].pcpi_data = iprv.v2 & 0xffffffff; - prot->pcp_info[5].pcpi_data = iprv.v2 >> 32; - } - return iprv.status; -} - -/* - * Flush the processor instruction or data caches. *PROGRESS must be - * initialized to zero before calling this for the first time.. - */ -static inline s64 -ia64_pal_cache_flush (u64 cache_type, u64 invalidate, u64 *progress, u64 *vector) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_CACHE_FLUSH, cache_type, invalidate, *progress); - if (vector) - *vector = iprv.v0; - *progress = iprv.v1; - return iprv.status; -} - - -/* Initialize the processor controlled caches */ -static inline s64 -ia64_pal_cache_init (u64 level, u64 cache_type, u64 rest) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_CACHE_INIT, level, cache_type, rest); - return iprv.status; -} - -/* Initialize the tags and data of a data or unified cache line of - * processor controlled cache to known values without the availability - * of backing memory. - */ -static inline s64 -ia64_pal_cache_line_init (u64 physical_addr, u64 data_value) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_CACHE_LINE_INIT, physical_addr, data_value, 0); - return iprv.status; -} - - -/* Read the data and tag of a processor controlled cache line for diags */ -static inline s64 -ia64_pal_cache_read (pal_cache_line_id_u_t line_id, u64 physical_addr) -{ - struct ia64_pal_retval iprv; - PAL_CALL_PHYS_STK(iprv, PAL_CACHE_READ, line_id.pclid_data, - physical_addr, 0); - return iprv.status; -} - -/* Return summary information about the hierarchy of caches controlled by the processor */ -static inline s64 -ia64_pal_cache_summary (u64 *cache_levels, u64 *unique_caches) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_CACHE_SUMMARY, 0, 0, 0); - if (cache_levels) - *cache_levels = iprv.v0; - if (unique_caches) - *unique_caches = iprv.v1; - return iprv.status; -} - -/* Write the data and tag of a processor-controlled cache line for diags */ -static inline s64 -ia64_pal_cache_write (pal_cache_line_id_u_t line_id, u64 physical_addr, u64 data) -{ - struct ia64_pal_retval iprv; - PAL_CALL_PHYS_STK(iprv, PAL_CACHE_WRITE, line_id.pclid_data, - physical_addr, data); - return iprv.status; -} - - -/* Return the parameters needed to copy relocatable PAL procedures from ROM to memory */ -static inline s64 -ia64_pal_copy_info (u64 copy_type, u64 num_procs, u64 num_iopics, - u64 *buffer_size, u64 *buffer_align) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_COPY_INFO, copy_type, num_procs, num_iopics); - if (buffer_size) - *buffer_size = iprv.v0; - if (buffer_align) - *buffer_align = iprv.v1; - return iprv.status; -} - -/* Copy relocatable PAL procedures from ROM to memory */ -static inline s64 -ia64_pal_copy_pal (u64 target_addr, u64 alloc_size, u64 processor, u64 *pal_proc_offset) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_COPY_PAL, target_addr, alloc_size, processor); - if (pal_proc_offset) - *pal_proc_offset = iprv.v0; - return iprv.status; -} - -/* Return the number of instruction and data debug register pairs */ -static inline s64 -ia64_pal_debug_info (u64 *inst_regs, u64 *data_regs) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_DEBUG_INFO, 0, 0, 0); - if (inst_regs) - *inst_regs = iprv.v0; - if (data_regs) - *data_regs = iprv.v1; - - return iprv.status; -} - -#ifdef TBD -/* Switch from IA64-system environment to IA-32 system environment */ -static inline s64 -ia64_pal_enter_ia32_env (ia32_env1, ia32_env2, ia32_env3) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_ENTER_IA_32_ENV, ia32_env1, ia32_env2, ia32_env3); - return iprv.status; -} -#endif - -/* Get unique geographical address of this processor on its bus */ -static inline s64 -ia64_pal_fixed_addr (u64 *global_unique_addr) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_FIXED_ADDR, 0, 0, 0); - if (global_unique_addr) - *global_unique_addr = iprv.v0; - return iprv.status; -} - -/* Get base frequency of the platform if generated by the processor */ -static inline s64 -ia64_pal_freq_base (u64 *platform_base_freq) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_FREQ_BASE, 0, 0, 0); - if (platform_base_freq) - *platform_base_freq = iprv.v0; - return iprv.status; -} - -/* - * Get the ratios for processor frequency, bus frequency and interval timer to - * to base frequency of the platform - */ -static inline s64 -ia64_pal_freq_ratios (struct pal_freq_ratio *proc_ratio, struct pal_freq_ratio *bus_ratio, - struct pal_freq_ratio *itc_ratio) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_FREQ_RATIOS, 0, 0, 0); - if (proc_ratio) - *(u64 *)proc_ratio = iprv.v0; - if (bus_ratio) - *(u64 *)bus_ratio = iprv.v1; - if (itc_ratio) - *(u64 *)itc_ratio = iprv.v2; - return iprv.status; -} - -/* - * Get the current hardware resource sharing policy of the processor - */ -static inline s64 -ia64_pal_get_hw_policy (u64 proc_num, u64 *cur_policy, u64 *num_impacted, - u64 *la) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_GET_HW_POLICY, proc_num, 0, 0); - if (cur_policy) - *cur_policy = iprv.v0; - if (num_impacted) - *num_impacted = iprv.v1; - if (la) - *la = iprv.v2; - return iprv.status; -} - -/* Make the processor enter HALT or one of the implementation dependent low - * power states where prefetching and execution are suspended and cache and - * TLB coherency is not maintained. - */ -static inline s64 -ia64_pal_halt (u64 halt_state) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_HALT, halt_state, 0, 0); - return iprv.status; -} - -typedef union pal_power_mgmt_info_u { - u64 ppmi_data; - struct { - u64 exit_latency : 16, - entry_latency : 16, - power_consumption : 28, - im : 1, - co : 1, - reserved : 2; - } pal_power_mgmt_info_s; -} pal_power_mgmt_info_u_t; - -/* Return information about processor's optional power management capabilities. */ -static inline s64 -ia64_pal_halt_info (pal_power_mgmt_info_u_t *power_buf) -{ - struct ia64_pal_retval iprv; - PAL_CALL_STK(iprv, PAL_HALT_INFO, (unsigned long) power_buf, 0, 0); - return iprv.status; -} - -/* Get the current P-state information */ -static inline s64 -ia64_pal_get_pstate (u64 *pstate_index, unsigned long type) -{ - struct ia64_pal_retval iprv; - PAL_CALL_STK(iprv, PAL_GET_PSTATE, type, 0, 0); - *pstate_index = iprv.v0; - return iprv.status; -} - -/* Set the P-state */ -static inline s64 -ia64_pal_set_pstate (u64 pstate_index) -{ - struct ia64_pal_retval iprv; - PAL_CALL_STK(iprv, PAL_SET_PSTATE, pstate_index, 0, 0); - return iprv.status; -} - -/* Processor branding information*/ -static inline s64 -ia64_pal_get_brand_info (char *brand_info) -{ - struct ia64_pal_retval iprv; - PAL_CALL_STK(iprv, PAL_BRAND_INFO, 0, (u64)brand_info, 0); - return iprv.status; -} - -/* Cause the processor to enter LIGHT HALT state, where prefetching and execution are - * suspended, but cache and TLB coherency is maintained. - */ -static inline s64 -ia64_pal_halt_light (void) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_HALT_LIGHT, 0, 0, 0); - return iprv.status; -} - -/* Clear all the processor error logging registers and reset the indicator that allows - * the error logging registers to be written. This procedure also checks the pending - * machine check bit and pending INIT bit and reports their states. - */ -static inline s64 -ia64_pal_mc_clear_log (u64 *pending_vector) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_MC_CLEAR_LOG, 0, 0, 0); - if (pending_vector) - *pending_vector = iprv.v0; - return iprv.status; -} - -/* Ensure that all outstanding transactions in a processor are completed or that any - * MCA due to thes outstanding transaction is taken. - */ -static inline s64 -ia64_pal_mc_drain (void) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_MC_DRAIN, 0, 0, 0); - return iprv.status; -} - -/* Return the machine check dynamic processor state */ -static inline s64 -ia64_pal_mc_dynamic_state (u64 info_type, u64 dy_buffer, u64 *size) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_MC_DYNAMIC_STATE, info_type, dy_buffer, 0); - if (size) - *size = iprv.v0; - return iprv.status; -} - -/* Return processor machine check information */ -static inline s64 -ia64_pal_mc_error_info (u64 info_index, u64 type_index, u64 *size, u64 *error_info) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_MC_ERROR_INFO, info_index, type_index, 0); - if (size) - *size = iprv.v0; - if (error_info) - *error_info = iprv.v1; - return iprv.status; -} - -/* Injects the requested processor error or returns info on - * supported injection capabilities for current processor implementation - */ -static inline s64 -ia64_pal_mc_error_inject_phys (u64 err_type_info, u64 err_struct_info, - u64 err_data_buffer, u64 *capabilities, u64 *resources) -{ - struct ia64_pal_retval iprv; - PAL_CALL_PHYS_STK(iprv, PAL_MC_ERROR_INJECT, err_type_info, - err_struct_info, err_data_buffer); - if (capabilities) - *capabilities= iprv.v0; - if (resources) - *resources= iprv.v1; - return iprv.status; -} - -static inline s64 -ia64_pal_mc_error_inject_virt (u64 err_type_info, u64 err_struct_info, - u64 err_data_buffer, u64 *capabilities, u64 *resources) -{ - struct ia64_pal_retval iprv; - PAL_CALL_STK(iprv, PAL_MC_ERROR_INJECT, err_type_info, - err_struct_info, err_data_buffer); - if (capabilities) - *capabilities= iprv.v0; - if (resources) - *resources= iprv.v1; - return iprv.status; -} - -/* Inform PALE_CHECK whether a machine check is expected so that PALE_CHECK willnot - * attempt to correct any expected machine checks. - */ -static inline s64 -ia64_pal_mc_expected (u64 expected, u64 *previous) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_MC_EXPECTED, expected, 0, 0); - if (previous) - *previous = iprv.v0; - return iprv.status; -} - -typedef union pal_hw_tracking_u { - u64 pht_data; - struct { - u64 itc :4, /* Instruction cache tracking */ - dct :4, /* Date cache tracking */ - itt :4, /* Instruction TLB tracking */ - ddt :4, /* Data TLB tracking */ - reserved:48; - } pal_hw_tracking_s; -} pal_hw_tracking_u_t; - -/* - * Hardware tracking status. - */ -static inline s64 -ia64_pal_mc_hw_tracking (u64 *status) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_MC_HW_TRACKING, 0, 0, 0); - if (status) - *status = iprv.v0; - return iprv.status; -} - -/* Register a platform dependent location with PAL to which it can save - * minimal processor state in the event of a machine check or initialization - * event. - */ -static inline s64 -ia64_pal_mc_register_mem (u64 physical_addr, u64 size, u64 *req_size) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_MC_REGISTER_MEM, physical_addr, size, 0); - if (req_size) - *req_size = iprv.v0; - return iprv.status; -} - -/* Restore minimal architectural processor state, set CMC interrupt if necessary - * and resume execution - */ -static inline s64 -ia64_pal_mc_resume (u64 set_cmci, u64 save_ptr) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_MC_RESUME, set_cmci, save_ptr, 0); - return iprv.status; -} - -/* Return the memory attributes implemented by the processor */ -static inline s64 -ia64_pal_mem_attrib (u64 *mem_attrib) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_MEM_ATTRIB, 0, 0, 0); - if (mem_attrib) - *mem_attrib = iprv.v0 & 0xff; - return iprv.status; -} - -/* Return the amount of memory needed for second phase of processor - * self-test and the required alignment of memory. - */ -static inline s64 -ia64_pal_mem_for_test (u64 *bytes_needed, u64 *alignment) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_MEM_FOR_TEST, 0, 0, 0); - if (bytes_needed) - *bytes_needed = iprv.v0; - if (alignment) - *alignment = iprv.v1; - return iprv.status; -} - -typedef union pal_perf_mon_info_u { - u64 ppmi_data; - struct { - u64 generic : 8, - width : 8, - cycles : 8, - retired : 8, - reserved : 32; - } pal_perf_mon_info_s; -} pal_perf_mon_info_u_t; - -/* Return the performance monitor information about what can be counted - * and how to configure the monitors to count the desired events. - */ -static inline s64 -ia64_pal_perf_mon_info (u64 *pm_buffer, pal_perf_mon_info_u_t *pm_info) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_PERF_MON_INFO, (unsigned long) pm_buffer, 0, 0); - if (pm_info) - pm_info->ppmi_data = iprv.v0; - return iprv.status; -} - -/* Specifies the physical address of the processor interrupt block - * and I/O port space. - */ -static inline s64 -ia64_pal_platform_addr (u64 type, u64 physical_addr) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_PLATFORM_ADDR, type, physical_addr, 0); - return iprv.status; -} - -/* Set the SAL PMI entrypoint in memory */ -static inline s64 -ia64_pal_pmi_entrypoint (u64 sal_pmi_entry_addr) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_PMI_ENTRYPOINT, sal_pmi_entry_addr, 0, 0); - return iprv.status; -} - -struct pal_features_s; -/* Provide information about configurable processor features */ -static inline s64 -ia64_pal_proc_get_features (u64 *features_avail, - u64 *features_status, - u64 *features_control, - u64 features_set) -{ - struct ia64_pal_retval iprv; - PAL_CALL_PHYS(iprv, PAL_PROC_GET_FEATURES, 0, features_set, 0); - if (iprv.status == 0) { - *features_avail = iprv.v0; - *features_status = iprv.v1; - *features_control = iprv.v2; - } - return iprv.status; -} - -/* Enable/disable processor dependent features */ -static inline s64 -ia64_pal_proc_set_features (u64 feature_select) -{ - struct ia64_pal_retval iprv; - PAL_CALL_PHYS(iprv, PAL_PROC_SET_FEATURES, feature_select, 0, 0); - return iprv.status; -} - -/* - * Put everything in a struct so we avoid the global offset table whenever - * possible. - */ -typedef struct ia64_ptce_info_s { - u64 base; - u32 count[2]; - u32 stride[2]; -} ia64_ptce_info_t; - -/* Return the information required for the architected loop used to purge - * (initialize) the entire TC - */ -static inline s64 -ia64_get_ptce (ia64_ptce_info_t *ptce) -{ - struct ia64_pal_retval iprv; - - if (!ptce) - return -1; - - PAL_CALL(iprv, PAL_PTCE_INFO, 0, 0, 0); - if (iprv.status == 0) { - ptce->base = iprv.v0; - ptce->count[0] = iprv.v1 >> 32; - ptce->count[1] = iprv.v1 & 0xffffffff; - ptce->stride[0] = iprv.v2 >> 32; - ptce->stride[1] = iprv.v2 & 0xffffffff; - } - return iprv.status; -} - -/* Return info about implemented application and control registers. */ -static inline s64 -ia64_pal_register_info (u64 info_request, u64 *reg_info_1, u64 *reg_info_2) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_REGISTER_INFO, info_request, 0, 0); - if (reg_info_1) - *reg_info_1 = iprv.v0; - if (reg_info_2) - *reg_info_2 = iprv.v1; - return iprv.status; -} - -typedef union pal_hints_u { - u64 ph_data; - struct { - u64 si : 1, - li : 1, - reserved : 62; - } pal_hints_s; -} pal_hints_u_t; - -/* Return information about the register stack and RSE for this processor - * implementation. - */ -static inline s64 -ia64_pal_rse_info (u64 *num_phys_stacked, pal_hints_u_t *hints) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_RSE_INFO, 0, 0, 0); - if (num_phys_stacked) - *num_phys_stacked = iprv.v0; - if (hints) - hints->ph_data = iprv.v1; - return iprv.status; -} - -/* - * Set the current hardware resource sharing policy of the processor - */ -static inline s64 -ia64_pal_set_hw_policy (u64 policy) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_SET_HW_POLICY, policy, 0, 0); - return iprv.status; -} - -/* Cause the processor to enter SHUTDOWN state, where prefetching and execution are - * suspended, but cause cache and TLB coherency to be maintained. - * This is usually called in IA-32 mode. - */ -static inline s64 -ia64_pal_shutdown (void) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_SHUTDOWN, 0, 0, 0); - return iprv.status; -} - -/* Perform the second phase of processor self-test. */ -static inline s64 -ia64_pal_test_proc (u64 test_addr, u64 test_size, u64 attributes, u64 *self_test_state) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_TEST_PROC, test_addr, test_size, attributes); - if (self_test_state) - *self_test_state = iprv.v0; - return iprv.status; -} - -typedef union pal_version_u { - u64 pal_version_val; - struct { - u64 pv_pal_b_rev : 8; - u64 pv_pal_b_model : 8; - u64 pv_reserved1 : 8; - u64 pv_pal_vendor : 8; - u64 pv_pal_a_rev : 8; - u64 pv_pal_a_model : 8; - u64 pv_reserved2 : 16; - } pal_version_s; -} pal_version_u_t; - - -/* - * Return PAL version information. While the documentation states that - * PAL_VERSION can be called in either physical or virtual mode, some - * implementations only allow physical calls. We don't call it very often, - * so the overhead isn't worth eliminating. - */ -static inline s64 -ia64_pal_version (pal_version_u_t *pal_min_version, pal_version_u_t *pal_cur_version) -{ - struct ia64_pal_retval iprv; - PAL_CALL_PHYS(iprv, PAL_VERSION, 0, 0, 0); - if (pal_min_version) - pal_min_version->pal_version_val = iprv.v0; - - if (pal_cur_version) - pal_cur_version->pal_version_val = iprv.v1; - - return iprv.status; -} - -typedef union pal_tc_info_u { - u64 pti_val; - struct { - u64 num_sets : 8, - associativity : 8, - num_entries : 16, - pf : 1, - unified : 1, - reduce_tr : 1, - reserved : 29; - } pal_tc_info_s; -} pal_tc_info_u_t; - -#define tc_reduce_tr pal_tc_info_s.reduce_tr -#define tc_unified pal_tc_info_s.unified -#define tc_pf pal_tc_info_s.pf -#define tc_num_entries pal_tc_info_s.num_entries -#define tc_associativity pal_tc_info_s.associativity -#define tc_num_sets pal_tc_info_s.num_sets - - -/* Return information about the virtual memory characteristics of the processor - * implementation. - */ -static inline s64 -ia64_pal_vm_info (u64 tc_level, u64 tc_type, pal_tc_info_u_t *tc_info, u64 *tc_pages) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_VM_INFO, tc_level, tc_type, 0); - if (tc_info) - tc_info->pti_val = iprv.v0; - if (tc_pages) - *tc_pages = iprv.v1; - return iprv.status; -} - -/* Get page size information about the virtual memory characteristics of the processor - * implementation. - */ -static inline s64 -ia64_pal_vm_page_size (u64 *tr_pages, u64 *vw_pages) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_VM_PAGE_SIZE, 0, 0, 0); - if (tr_pages) - *tr_pages = iprv.v0; - if (vw_pages) - *vw_pages = iprv.v1; - return iprv.status; -} - -typedef union pal_vm_info_1_u { - u64 pvi1_val; - struct { - u64 vw : 1, - phys_add_size : 7, - key_size : 8, - max_pkr : 8, - hash_tag_id : 8, - max_dtr_entry : 8, - max_itr_entry : 8, - max_unique_tcs : 8, - num_tc_levels : 8; - } pal_vm_info_1_s; -} pal_vm_info_1_u_t; - -#define PAL_MAX_PURGES 0xFFFF /* all ones is means unlimited */ - -typedef union pal_vm_info_2_u { - u64 pvi2_val; - struct { - u64 impl_va_msb : 8, - rid_size : 8, - max_purges : 16, - reserved : 32; - } pal_vm_info_2_s; -} pal_vm_info_2_u_t; - -/* Get summary information about the virtual memory characteristics of the processor - * implementation. - */ -static inline s64 -ia64_pal_vm_summary (pal_vm_info_1_u_t *vm_info_1, pal_vm_info_2_u_t *vm_info_2) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_VM_SUMMARY, 0, 0, 0); - if (vm_info_1) - vm_info_1->pvi1_val = iprv.v0; - if (vm_info_2) - vm_info_2->pvi2_val = iprv.v1; - return iprv.status; -} - -typedef union pal_vp_info_u { - u64 pvi_val; - struct { - u64 index: 48, /* virtual feature set info */ - vmm_id: 16; /* feature set id */ - } pal_vp_info_s; -} pal_vp_info_u_t; - -/* - * Returns infomation about virtual processor features - */ -static inline s64 -ia64_pal_vp_info (u64 feature_set, u64 vp_buffer, u64 *vp_info, u64 *vmm_id) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_VP_INFO, feature_set, vp_buffer, 0); - if (vp_info) - *vp_info = iprv.v0; - if (vmm_id) - *vmm_id = iprv.v1; - return iprv.status; -} - -typedef union pal_itr_valid_u { - u64 piv_val; - struct { - u64 access_rights_valid : 1, - priv_level_valid : 1, - dirty_bit_valid : 1, - mem_attr_valid : 1, - reserved : 60; - } pal_tr_valid_s; -} pal_tr_valid_u_t; - -/* Read a translation register */ -static inline s64 -ia64_pal_tr_read (u64 reg_num, u64 tr_type, u64 *tr_buffer, pal_tr_valid_u_t *tr_valid) -{ - struct ia64_pal_retval iprv; - PAL_CALL_PHYS_STK(iprv, PAL_VM_TR_READ, reg_num, tr_type,(u64)ia64_tpa(tr_buffer)); - if (tr_valid) - tr_valid->piv_val = iprv.v0; - return iprv.status; -} - -/* - * PAL_PREFETCH_VISIBILITY transaction types - */ -#define PAL_VISIBILITY_VIRTUAL 0 -#define PAL_VISIBILITY_PHYSICAL 1 - -/* - * PAL_PREFETCH_VISIBILITY return codes - */ -#define PAL_VISIBILITY_OK 1 -#define PAL_VISIBILITY_OK_REMOTE_NEEDED 0 -#define PAL_VISIBILITY_INVAL_ARG -2 -#define PAL_VISIBILITY_ERROR -3 - -static inline s64 -ia64_pal_prefetch_visibility (s64 trans_type) -{ - struct ia64_pal_retval iprv; - PAL_CALL(iprv, PAL_PREFETCH_VISIBILITY, trans_type, 0, 0); - return iprv.status; -} - -/* data structure for getting information on logical to physical mappings */ -typedef union pal_log_overview_u { - struct { - u64 num_log :16, /* Total number of logical - * processors on this die - */ - tpc :8, /* Threads per core */ - reserved3 :8, /* Reserved */ - cpp :8, /* Cores per processor */ - reserved2 :8, /* Reserved */ - ppid :8, /* Physical processor ID */ - reserved1 :8; /* Reserved */ - } overview_bits; - u64 overview_data; -} pal_log_overview_t; - -typedef union pal_proc_n_log_info1_u{ - struct { - u64 tid :16, /* Thread id */ - reserved2 :16, /* Reserved */ - cid :16, /* Core id */ - reserved1 :16; /* Reserved */ - } ppli1_bits; - u64 ppli1_data; -} pal_proc_n_log_info1_t; - -typedef union pal_proc_n_log_info2_u { - struct { - u64 la :16, /* Logical address */ - reserved :48; /* Reserved */ - } ppli2_bits; - u64 ppli2_data; -} pal_proc_n_log_info2_t; - -typedef struct pal_logical_to_physical_s -{ - pal_log_overview_t overview; - pal_proc_n_log_info1_t ppli1; - pal_proc_n_log_info2_t ppli2; -} pal_logical_to_physical_t; - -#define overview_num_log overview.overview_bits.num_log -#define overview_tpc overview.overview_bits.tpc -#define overview_cpp overview.overview_bits.cpp -#define overview_ppid overview.overview_bits.ppid -#define log1_tid ppli1.ppli1_bits.tid -#define log1_cid ppli1.ppli1_bits.cid -#define log2_la ppli2.ppli2_bits.la - -/* Get information on logical to physical processor mappings. */ -static inline s64 -ia64_pal_logical_to_phys(u64 proc_number, pal_logical_to_physical_t *mapping) -{ - struct ia64_pal_retval iprv; - - PAL_CALL(iprv, PAL_LOGICAL_TO_PHYSICAL, proc_number, 0, 0); - - if (iprv.status == PAL_STATUS_SUCCESS) - { - mapping->overview.overview_data = iprv.v0; - mapping->ppli1.ppli1_data = iprv.v1; - mapping->ppli2.ppli2_data = iprv.v2; - } - - return iprv.status; -} - -typedef struct pal_cache_shared_info_s -{ - u64 num_shared; - pal_proc_n_log_info1_t ppli1; - pal_proc_n_log_info2_t ppli2; -} pal_cache_shared_info_t; - -/* Get information on logical to physical processor mappings. */ -static inline s64 -ia64_pal_cache_shared_info(u64 level, - u64 type, - u64 proc_number, - pal_cache_shared_info_t *info) -{ - struct ia64_pal_retval iprv; - - PAL_CALL(iprv, PAL_CACHE_SHARED_INFO, level, type, proc_number); - - if (iprv.status == PAL_STATUS_SUCCESS) { - info->num_shared = iprv.v0; - info->ppli1.ppli1_data = iprv.v1; - info->ppli2.ppli2_data = iprv.v2; - } - - return iprv.status; -} -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_IA64_PAL_H */ diff --git a/include/asm-ia64/param.h b/include/asm-ia64/param.h deleted file mode 100644 index 0964c32c1358..000000000000 --- a/include/asm-ia64/param.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef _ASM_IA64_PARAM_H -#define _ASM_IA64_PARAM_H - -/* - * Fundamental kernel parameters. - * - * Based on . - * - * Modified 1998, 1999, 2002-2003 - * David Mosberger-Tang , Hewlett-Packard Co - */ - -#define EXEC_PAGESIZE 65536 - -#ifndef NOGROUP -# define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ -# define USER_HZ HZ -# define CLOCKS_PER_SEC HZ /* frequency at which times() counts */ -#else - /* - * Technically, this is wrong, but some old apps still refer to it. The proper way to - * get the HZ value is via sysconf(_SC_CLK_TCK). - */ -# define HZ 1024 -#endif - -#endif /* _ASM_IA64_PARAM_H */ diff --git a/include/asm-ia64/paravirt.h b/include/asm-ia64/paravirt.h deleted file mode 100644 index 1b4df129f579..000000000000 --- a/include/asm-ia64/paravirt.h +++ /dev/null @@ -1,255 +0,0 @@ -/****************************************************************************** - * include/asm-ia64/paravirt.h - * - * Copyright (c) 2008 Isaku Yamahata - * VA Linux Systems Japan K.K. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - - -#ifndef __ASM_PARAVIRT_H -#define __ASM_PARAVIRT_H - -#ifdef CONFIG_PARAVIRT_GUEST - -#define PARAVIRT_HYPERVISOR_TYPE_DEFAULT 0 -#define PARAVIRT_HYPERVISOR_TYPE_XEN 1 - -#ifndef __ASSEMBLY__ - -#include -#include - -/****************************************************************************** - * general info - */ -struct pv_info { - unsigned int kernel_rpl; - int paravirt_enabled; - const char *name; -}; - -extern struct pv_info pv_info; - -static inline int paravirt_enabled(void) -{ - return pv_info.paravirt_enabled; -} - -static inline unsigned int get_kernel_rpl(void) -{ - return pv_info.kernel_rpl; -} - -/****************************************************************************** - * initialization hooks. - */ -struct rsvd_region; - -struct pv_init_ops { - void (*banner)(void); - - int (*reserve_memory)(struct rsvd_region *region); - - void (*arch_setup_early)(void); - void (*arch_setup_console)(char **cmdline_p); - int (*arch_setup_nomca)(void); - - void (*post_smp_prepare_boot_cpu)(void); -}; - -extern struct pv_init_ops pv_init_ops; - -static inline void paravirt_banner(void) -{ - if (pv_init_ops.banner) - pv_init_ops.banner(); -} - -static inline int paravirt_reserve_memory(struct rsvd_region *region) -{ - if (pv_init_ops.reserve_memory) - return pv_init_ops.reserve_memory(region); - return 0; -} - -static inline void paravirt_arch_setup_early(void) -{ - if (pv_init_ops.arch_setup_early) - pv_init_ops.arch_setup_early(); -} - -static inline void paravirt_arch_setup_console(char **cmdline_p) -{ - if (pv_init_ops.arch_setup_console) - pv_init_ops.arch_setup_console(cmdline_p); -} - -static inline int paravirt_arch_setup_nomca(void) -{ - if (pv_init_ops.arch_setup_nomca) - return pv_init_ops.arch_setup_nomca(); - return 0; -} - -static inline void paravirt_post_smp_prepare_boot_cpu(void) -{ - if (pv_init_ops.post_smp_prepare_boot_cpu) - pv_init_ops.post_smp_prepare_boot_cpu(); -} - -/****************************************************************************** - * replacement of iosapic operations. - */ - -struct pv_iosapic_ops { - void (*pcat_compat_init)(void); - - struct irq_chip *(*get_irq_chip)(unsigned long trigger); - - unsigned int (*__read)(char __iomem *iosapic, unsigned int reg); - void (*__write)(char __iomem *iosapic, unsigned int reg, u32 val); -}; - -extern struct pv_iosapic_ops pv_iosapic_ops; - -static inline void -iosapic_pcat_compat_init(void) -{ - if (pv_iosapic_ops.pcat_compat_init) - pv_iosapic_ops.pcat_compat_init(); -} - -static inline struct irq_chip* -iosapic_get_irq_chip(unsigned long trigger) -{ - return pv_iosapic_ops.get_irq_chip(trigger); -} - -static inline unsigned int -__iosapic_read(char __iomem *iosapic, unsigned int reg) -{ - return pv_iosapic_ops.__read(iosapic, reg); -} - -static inline void -__iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val) -{ - return pv_iosapic_ops.__write(iosapic, reg, val); -} - -/****************************************************************************** - * replacement of irq operations. - */ - -struct pv_irq_ops { - void (*register_ipi)(void); - - int (*assign_irq_vector)(int irq); - void (*free_irq_vector)(int vector); - - void (*register_percpu_irq)(ia64_vector vec, - struct irqaction *action); - - void (*resend_irq)(unsigned int vector); -}; - -extern struct pv_irq_ops pv_irq_ops; - -static inline void -ia64_register_ipi(void) -{ - pv_irq_ops.register_ipi(); -} - -static inline int -assign_irq_vector(int irq) -{ - return pv_irq_ops.assign_irq_vector(irq); -} - -static inline void -free_irq_vector(int vector) -{ - return pv_irq_ops.free_irq_vector(vector); -} - -static inline void -register_percpu_irq(ia64_vector vec, struct irqaction *action) -{ - pv_irq_ops.register_percpu_irq(vec, action); -} - -static inline void -ia64_resend_irq(unsigned int vector) -{ - pv_irq_ops.resend_irq(vector); -} - -/****************************************************************************** - * replacement of time operations. - */ - -extern struct itc_jitter_data_t itc_jitter_data; -extern volatile int time_keeper_id; - -struct pv_time_ops { - void (*init_missing_ticks_accounting)(int cpu); - int (*do_steal_accounting)(unsigned long *new_itm); - - void (*clocksource_resume)(void); -}; - -extern struct pv_time_ops pv_time_ops; - -static inline void -paravirt_init_missing_ticks_accounting(int cpu) -{ - if (pv_time_ops.init_missing_ticks_accounting) - pv_time_ops.init_missing_ticks_accounting(cpu); -} - -static inline int -paravirt_do_steal_accounting(unsigned long *new_itm) -{ - return pv_time_ops.do_steal_accounting(new_itm); -} - -#endif /* !__ASSEMBLY__ */ - -#else -/* fallback for native case */ - -#ifndef __ASSEMBLY__ - -#define paravirt_banner() do { } while (0) -#define paravirt_reserve_memory(region) 0 - -#define paravirt_arch_setup_early() do { } while (0) -#define paravirt_arch_setup_console(cmdline_p) do { } while (0) -#define paravirt_arch_setup_nomca() 0 -#define paravirt_post_smp_prepare_boot_cpu() do { } while (0) - -#define paravirt_init_missing_ticks_accounting(cpu) do { } while (0) -#define paravirt_do_steal_accounting(new_itm) 0 - -#endif /* __ASSEMBLY__ */ - - -#endif /* CONFIG_PARAVIRT_GUEST */ - -#endif /* __ASM_PARAVIRT_H */ diff --git a/include/asm-ia64/paravirt_privop.h b/include/asm-ia64/paravirt_privop.h deleted file mode 100644 index 52482e6940ac..000000000000 --- a/include/asm-ia64/paravirt_privop.h +++ /dev/null @@ -1,114 +0,0 @@ -/****************************************************************************** - * include/asm-ia64/paravirt_privops.h - * - * Copyright (c) 2008 Isaku Yamahata - * VA Linux Systems Japan K.K. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef _ASM_IA64_PARAVIRT_PRIVOP_H -#define _ASM_IA64_PARAVIRT_PRIVOP_H - -#ifdef CONFIG_PARAVIRT - -#ifndef __ASSEMBLY__ - -#include -#include /* for IA64_PSR_I */ - -/****************************************************************************** - * replacement of intrinsics operations. - */ - -struct pv_cpu_ops { - void (*fc)(unsigned long addr); - unsigned long (*thash)(unsigned long addr); - unsigned long (*get_cpuid)(int index); - unsigned long (*get_pmd)(int index); - unsigned long (*getreg)(int reg); - void (*setreg)(int reg, unsigned long val); - void (*ptcga)(unsigned long addr, unsigned long size); - unsigned long (*get_rr)(unsigned long index); - void (*set_rr)(unsigned long index, unsigned long val); - void (*set_rr0_to_rr4)(unsigned long val0, unsigned long val1, - unsigned long val2, unsigned long val3, - unsigned long val4); - void (*ssm_i)(void); - void (*rsm_i)(void); - unsigned long (*get_psr_i)(void); - void (*intrin_local_irq_restore)(unsigned long flags); -}; - -extern struct pv_cpu_ops pv_cpu_ops; - -extern void ia64_native_setreg_func(int regnum, unsigned long val); -extern unsigned long ia64_native_getreg_func(int regnum); - -/************************************************/ -/* Instructions paravirtualized for performance */ -/************************************************/ - -/* mask for ia64_native_ssm/rsm() must be constant.("i" constraing). - * static inline function doesn't satisfy it. */ -#define paravirt_ssm(mask) \ - do { \ - if ((mask) == IA64_PSR_I) \ - pv_cpu_ops.ssm_i(); \ - else \ - ia64_native_ssm(mask); \ - } while (0) - -#define paravirt_rsm(mask) \ - do { \ - if ((mask) == IA64_PSR_I) \ - pv_cpu_ops.rsm_i(); \ - else \ - ia64_native_rsm(mask); \ - } while (0) - -/****************************************************************************** - * replacement of hand written assembly codes. - */ -struct pv_cpu_asm_switch { - unsigned long switch_to; - unsigned long leave_syscall; - unsigned long work_processed_syscall; - unsigned long leave_kernel; -}; -void paravirt_cpu_asm_init(const struct pv_cpu_asm_switch *cpu_asm_switch); - -#endif /* __ASSEMBLY__ */ - -#define IA64_PARAVIRT_ASM_FUNC(name) paravirt_ ## name - -#else - -/* fallback for native case */ -#define IA64_PARAVIRT_ASM_FUNC(name) ia64_native_ ## name - -#endif /* CONFIG_PARAVIRT */ - -/* these routines utilize privilege-sensitive or performance-sensitive - * privileged instructions so the code must be replaced with - * paravirtualized versions */ -#define ia64_switch_to IA64_PARAVIRT_ASM_FUNC(switch_to) -#define ia64_leave_syscall IA64_PARAVIRT_ASM_FUNC(leave_syscall) -#define ia64_work_processed_syscall \ - IA64_PARAVIRT_ASM_FUNC(work_processed_syscall) -#define ia64_leave_kernel IA64_PARAVIRT_ASM_FUNC(leave_kernel) - -#endif /* _ASM_IA64_PARAVIRT_PRIVOP_H */ diff --git a/include/asm-ia64/parport.h b/include/asm-ia64/parport.h deleted file mode 100644 index 67e16adfcd25..000000000000 --- a/include/asm-ia64/parport.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * parport.h: platform-specific PC-style parport initialisation - * - * Copyright (C) 1999, 2000 Tim Waugh - * - * This file should only be included by drivers/parport/parport_pc.c. - */ - -#ifndef _ASM_IA64_PARPORT_H -#define _ASM_IA64_PARPORT_H 1 - -static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); - -static int __devinit -parport_pc_find_nonpci_ports (int autoirq, int autodma) -{ - return parport_pc_find_isa_ports(autoirq, autodma); -} - -#endif /* _ASM_IA64_PARPORT_H */ diff --git a/include/asm-ia64/patch.h b/include/asm-ia64/patch.h deleted file mode 100644 index 295fe6ab4584..000000000000 --- a/include/asm-ia64/patch.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _ASM_IA64_PATCH_H -#define _ASM_IA64_PATCH_H - -/* - * Copyright (C) 2003 Hewlett-Packard Co - * David Mosberger-Tang - * - * There are a number of reasons for patching instructions. Rather than duplicating code - * all over the place, we put the common stuff here. Reasons for patching: in-kernel - * module-loader, virtual-to-physical patch-list, McKinley Errata 9 workaround, and gate - * shared library. Undoubtedly, some of these reasons will disappear and others will - * be added over time. - */ -#include -#include - -extern void ia64_patch (u64 insn_addr, u64 mask, u64 val); /* patch any insn slot */ -extern void ia64_patch_imm64 (u64 insn_addr, u64 val); /* patch "movl" w/abs. value*/ -extern void ia64_patch_imm60 (u64 insn_addr, u64 val); /* patch "brl" w/ip-rel value */ - -extern void ia64_patch_mckinley_e9 (unsigned long start, unsigned long end); -extern void ia64_patch_vtop (unsigned long start, unsigned long end); -extern void ia64_patch_phys_stack_reg(unsigned long val); -extern void ia64_patch_rse (unsigned long start, unsigned long end); -extern void ia64_patch_gate (void); - -#endif /* _ASM_IA64_PATCH_H */ diff --git a/include/asm-ia64/pci.h b/include/asm-ia64/pci.h deleted file mode 100644 index 0149097b736d..000000000000 --- a/include/asm-ia64/pci.h +++ /dev/null @@ -1,167 +0,0 @@ -#ifndef _ASM_IA64_PCI_H -#define _ASM_IA64_PCI_H - -#include -#include -#include -#include -#include - -#include -#include -#include - -/* - * Can be used to override the logic in pci_scan_bus for skipping already-configured bus - * numbers - to be used for buggy BIOSes or architectures with incomplete PCI setup by the - * loader. - */ -#define pcibios_assign_all_busses() 0 -#define pcibios_scan_all_fns(a, b) 0 - -#define PCIBIOS_MIN_IO 0x1000 -#define PCIBIOS_MIN_MEM 0x10000000 - -void pcibios_config_init(void); - -struct pci_dev; - -/* - * PCI_DMA_BUS_IS_PHYS should be set to 1 if there is _necessarily_ a direct - * correspondence between device bus addresses and CPU physical addresses. - * Platforms with a hardware I/O MMU _must_ turn this off to suppress the - * bounce buffer handling code in the block and network device layers. - * Platforms with separate bus address spaces _must_ turn this off and provide - * a device DMA mapping implementation that takes care of the necessary - * address translation. - * - * For now, the ia64 platforms which may have separate/multiple bus address - * spaces all have I/O MMUs which support the merging of physically - * discontiguous buffers, so we can use that as the sole factor to determine - * the setting of PCI_DMA_BUS_IS_PHYS. - */ -extern unsigned long ia64_max_iommu_merge_mask; -#define PCI_DMA_BUS_IS_PHYS (ia64_max_iommu_merge_mask == ~0UL) - -static inline void -pcibios_set_master (struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} - -static inline void -pcibios_penalize_isa_irq (int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - -#include - -/* pci_unmap_{single,page} is not a nop, thus... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ - dma_addr_t ADDR_NAME; -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ - __u32 LEN_NAME; -#define pci_unmap_addr(PTR, ADDR_NAME) \ - ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ - (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) \ - ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ - (((PTR)->LEN_NAME) = (VAL)) - -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - unsigned long cacheline_size; - u8 byte; - - pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte); - if (byte == 0) - cacheline_size = 1024; - else - cacheline_size = (int) byte * 4; - - *strat = PCI_DMA_BURST_MULTIPLE; - *strategy_parameter = cacheline_size; -} -#endif - -#define HAVE_PCI_MMAP -extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine); -#define HAVE_PCI_LEGACY -extern int pci_mmap_legacy_page_range(struct pci_bus *bus, - struct vm_area_struct *vma); -extern ssize_t pci_read_legacy_io(struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count); -extern ssize_t pci_write_legacy_io(struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count); -extern int pci_mmap_legacy_mem(struct kobject *kobj, - struct bin_attribute *attr, - struct vm_area_struct *vma); - -#define pci_get_legacy_mem platform_pci_get_legacy_mem -#define pci_legacy_read platform_pci_legacy_read -#define pci_legacy_write platform_pci_legacy_write - -struct pci_window { - struct resource resource; - u64 offset; -}; - -struct pci_controller { - void *acpi_handle; - void *iommu; - int segment; - int node; /* nearest node with memory or -1 for global allocation */ - - unsigned int windows; - struct pci_window *window; - - void *platform_data; -}; - -#define PCI_CONTROLLER(busdev) ((struct pci_controller *) busdev->sysdata) -#define pci_domain_nr(busdev) (PCI_CONTROLLER(busdev)->segment) - -extern struct pci_ops pci_root_ops; - -static inline int pci_proc_domain(struct pci_bus *bus) -{ - return (pci_domain_nr(bus) != 0); -} - -extern void pcibios_resource_to_bus(struct pci_dev *dev, - struct pci_bus_region *region, struct resource *res); - -extern void pcibios_bus_to_resource(struct pci_dev *dev, - struct resource *res, struct pci_bus_region *region); - -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - -#define pcibios_scan_all_fns(a, b) 0 - -#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ -static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) -{ - return channel ? isa_irq_to_vector(15) : isa_irq_to_vector(14); -} - -#endif /* _ASM_IA64_PCI_H */ diff --git a/include/asm-ia64/percpu.h b/include/asm-ia64/percpu.h deleted file mode 100644 index 77f30b664b4e..000000000000 --- a/include/asm-ia64/percpu.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef _ASM_IA64_PERCPU_H -#define _ASM_IA64_PERCPU_H - -/* - * Copyright (C) 2002-2003 Hewlett-Packard Co - * David Mosberger-Tang - */ - -#define PERCPU_ENOUGH_ROOM PERCPU_PAGE_SIZE - -#ifdef __ASSEMBLY__ -# define THIS_CPU(var) (per_cpu__##var) /* use this to mark accesses to per-CPU variables... */ -#else /* !__ASSEMBLY__ */ - - -#include - -#ifdef CONFIG_SMP - -#ifdef HAVE_MODEL_SMALL_ATTRIBUTE -# define PER_CPU_ATTRIBUTES __attribute__((__model__ (__small__))) -#endif - -#define __my_cpu_offset __ia64_per_cpu_var(local_per_cpu_offset) - -extern void *per_cpu_init(void); - -#else /* ! SMP */ - -#define PER_CPU_ATTRIBUTES __attribute__((__section__(".data.percpu"))) - -#define per_cpu_init() (__phys_per_cpu_start) - -#endif /* SMP */ - -/* - * Be extremely careful when taking the address of this variable! Due to virtual - * remapping, it is different from the canonical address returned by __get_cpu_var(var)! - * On the positive side, using __ia64_per_cpu_var() instead of __get_cpu_var() is slightly - * more efficient. - */ -#define __ia64_per_cpu_var(var) per_cpu__##var - -#include - -/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */ -DECLARE_PER_CPU(unsigned long, local_per_cpu_offset); - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_IA64_PERCPU_H */ diff --git a/include/asm-ia64/perfmon.h b/include/asm-ia64/perfmon.h deleted file mode 100644 index 7f3333dd00e4..000000000000 --- a/include/asm-ia64/perfmon.h +++ /dev/null @@ -1,279 +0,0 @@ -/* - * Copyright (C) 2001-2003 Hewlett-Packard Co - * Stephane Eranian - */ - -#ifndef _ASM_IA64_PERFMON_H -#define _ASM_IA64_PERFMON_H - -/* - * perfmon comamnds supported on all CPU models - */ -#define PFM_WRITE_PMCS 0x01 -#define PFM_WRITE_PMDS 0x02 -#define PFM_READ_PMDS 0x03 -#define PFM_STOP 0x04 -#define PFM_START 0x05 -#define PFM_ENABLE 0x06 /* obsolete */ -#define PFM_DISABLE 0x07 /* obsolete */ -#define PFM_CREATE_CONTEXT 0x08 -#define PFM_DESTROY_CONTEXT 0x09 /* obsolete use close() */ -#define PFM_RESTART 0x0a -#define PFM_PROTECT_CONTEXT 0x0b /* obsolete */ -#define PFM_GET_FEATURES 0x0c -#define PFM_DEBUG 0x0d -#define PFM_UNPROTECT_CONTEXT 0x0e /* obsolete */ -#define PFM_GET_PMC_RESET_VAL 0x0f -#define PFM_LOAD_CONTEXT 0x10 -#define PFM_UNLOAD_CONTEXT 0x11 - -/* - * PMU model specific commands (may not be supported on all PMU models) - */ -#define PFM_WRITE_IBRS 0x20 -#define PFM_WRITE_DBRS 0x21 - -/* - * context flags - */ -#define PFM_FL_NOTIFY_BLOCK 0x01 /* block task on user level notifications */ -#define PFM_FL_SYSTEM_WIDE 0x02 /* create a system wide context */ -#define PFM_FL_OVFL_NO_MSG 0x80 /* do not post overflow/end messages for notification */ - -/* - * event set flags - */ -#define PFM_SETFL_EXCL_IDLE 0x01 /* exclude idle task (syswide only) XXX: DO NOT USE YET */ - -/* - * PMC flags - */ -#define PFM_REGFL_OVFL_NOTIFY 0x1 /* send notification on overflow */ -#define PFM_REGFL_RANDOM 0x2 /* randomize sampling interval */ - -/* - * PMD/PMC/IBR/DBR return flags (ignored on input) - * - * Those flags are used on output and must be checked in case EAGAIN is returned - * by any of the calls using a pfarg_reg_t or pfarg_dbreg_t structure. - */ -#define PFM_REG_RETFL_NOTAVAIL (1UL<<31) /* set if register is implemented but not available */ -#define PFM_REG_RETFL_EINVAL (1UL<<30) /* set if register entry is invalid */ -#define PFM_REG_RETFL_MASK (PFM_REG_RETFL_NOTAVAIL|PFM_REG_RETFL_EINVAL) - -#define PFM_REG_HAS_ERROR(flag) (((flag) & PFM_REG_RETFL_MASK) != 0) - -typedef unsigned char pfm_uuid_t[16]; /* custom sampling buffer identifier type */ - -/* - * Request structure used to define a context - */ -typedef struct { - pfm_uuid_t ctx_smpl_buf_id; /* which buffer format to use (if needed) */ - unsigned long ctx_flags; /* noblock/block */ - unsigned short ctx_nextra_sets; /* number of extra event sets (you always get 1) */ - unsigned short ctx_reserved1; /* for future use */ - int ctx_fd; /* return arg: unique identification for context */ - void *ctx_smpl_vaddr; /* return arg: virtual address of sampling buffer, is used */ - unsigned long ctx_reserved2[11];/* for future use */ -} pfarg_context_t; - -/* - * Request structure used to write/read a PMC or PMD - */ -typedef struct { - unsigned int reg_num; /* which register */ - unsigned short reg_set; /* event set for this register */ - unsigned short reg_reserved1; /* for future use */ - - unsigned long reg_value; /* initial pmc/pmd value */ - unsigned long reg_flags; /* input: pmc/pmd flags, return: reg error */ - - unsigned long reg_long_reset; /* reset after buffer overflow notification */ - unsigned long reg_short_reset; /* reset after counter overflow */ - - unsigned long reg_reset_pmds[4]; /* which other counters to reset on overflow */ - unsigned long reg_random_seed; /* seed value when randomization is used */ - unsigned long reg_random_mask; /* bitmask used to limit random value */ - unsigned long reg_last_reset_val;/* return: PMD last reset value */ - - unsigned long reg_smpl_pmds[4]; /* which pmds are accessed when PMC overflows */ - unsigned long reg_smpl_eventid; /* opaque sampling event identifier */ - - unsigned long reg_reserved2[3]; /* for future use */ -} pfarg_reg_t; - -typedef struct { - unsigned int dbreg_num; /* which debug register */ - unsigned short dbreg_set; /* event set for this register */ - unsigned short dbreg_reserved1; /* for future use */ - unsigned long dbreg_value; /* value for debug register */ - unsigned long dbreg_flags; /* return: dbreg error */ - unsigned long dbreg_reserved2[1]; /* for future use */ -} pfarg_dbreg_t; - -typedef struct { - unsigned int ft_version; /* perfmon: major [16-31], minor [0-15] */ - unsigned int ft_reserved; /* reserved for future use */ - unsigned long reserved[4]; /* for future use */ -} pfarg_features_t; - -typedef struct { - pid_t load_pid; /* process to load the context into */ - unsigned short load_set; /* first event set to load */ - unsigned short load_reserved1; /* for future use */ - unsigned long load_reserved2[3]; /* for future use */ -} pfarg_load_t; - -typedef struct { - int msg_type; /* generic message header */ - int msg_ctx_fd; /* generic message header */ - unsigned long msg_ovfl_pmds[4]; /* which PMDs overflowed */ - unsigned short msg_active_set; /* active set at the time of overflow */ - unsigned short msg_reserved1; /* for future use */ - unsigned int msg_reserved2; /* for future use */ - unsigned long msg_tstamp; /* for perf tuning/debug */ -} pfm_ovfl_msg_t; - -typedef struct { - int msg_type; /* generic message header */ - int msg_ctx_fd; /* generic message header */ - unsigned long msg_tstamp; /* for perf tuning */ -} pfm_end_msg_t; - -typedef struct { - int msg_type; /* type of the message */ - int msg_ctx_fd; /* unique identifier for the context */ - unsigned long msg_tstamp; /* for perf tuning */ -} pfm_gen_msg_t; - -#define PFM_MSG_OVFL 1 /* an overflow happened */ -#define PFM_MSG_END 2 /* task to which context was attached ended */ - -typedef union { - pfm_ovfl_msg_t pfm_ovfl_msg; - pfm_end_msg_t pfm_end_msg; - pfm_gen_msg_t pfm_gen_msg; -} pfm_msg_t; - -/* - * Define the version numbers for both perfmon as a whole and the sampling buffer format. - */ -#define PFM_VERSION_MAJ 2U -#define PFM_VERSION_MIN 0U -#define PFM_VERSION (((PFM_VERSION_MAJ&0xffff)<<16)|(PFM_VERSION_MIN & 0xffff)) -#define PFM_VERSION_MAJOR(x) (((x)>>16) & 0xffff) -#define PFM_VERSION_MINOR(x) ((x) & 0xffff) - - -/* - * miscellaneous architected definitions - */ -#define PMU_FIRST_COUNTER 4 /* first counting monitor (PMC/PMD) */ -#define PMU_MAX_PMCS 256 /* maximum architected number of PMC registers */ -#define PMU_MAX_PMDS 256 /* maximum architected number of PMD registers */ - -#ifdef __KERNEL__ - -extern long perfmonctl(int fd, int cmd, void *arg, int narg); - -typedef struct { - void (*handler)(int irq, void *arg, struct pt_regs *regs); -} pfm_intr_handler_desc_t; - -extern void pfm_save_regs (struct task_struct *); -extern void pfm_load_regs (struct task_struct *); - -extern void pfm_exit_thread(struct task_struct *); -extern int pfm_use_debug_registers(struct task_struct *); -extern int pfm_release_debug_registers(struct task_struct *); -extern void pfm_syst_wide_update_task(struct task_struct *, unsigned long info, int is_ctxswin); -extern void pfm_inherit(struct task_struct *task, struct pt_regs *regs); -extern void pfm_init_percpu(void); -extern void pfm_handle_work(void); -extern int pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *h); -extern int pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *h); - - - -/* - * Reset PMD register flags - */ -#define PFM_PMD_SHORT_RESET 0 -#define PFM_PMD_LONG_RESET 1 - -typedef union { - unsigned int val; - struct { - unsigned int notify_user:1; /* notify user program of overflow */ - unsigned int reset_ovfl_pmds:1; /* reset overflowed PMDs */ - unsigned int block_task:1; /* block monitored task on kernel exit */ - unsigned int mask_monitoring:1; /* mask monitors via PMCx.plm */ - unsigned int reserved:28; /* for future use */ - } bits; -} pfm_ovfl_ctrl_t; - -typedef struct { - unsigned char ovfl_pmd; /* index of overflowed PMD */ - unsigned char ovfl_notify; /* =1 if monitor requested overflow notification */ - unsigned short active_set; /* event set active at the time of the overflow */ - pfm_ovfl_ctrl_t ovfl_ctrl; /* return: perfmon controls to set by handler */ - - unsigned long pmd_last_reset; /* last reset value of of the PMD */ - unsigned long smpl_pmds[4]; /* bitmask of other PMD of interest on overflow */ - unsigned long smpl_pmds_values[PMU_MAX_PMDS]; /* values for the other PMDs of interest */ - unsigned long pmd_value; /* current 64-bit value of the PMD */ - unsigned long pmd_eventid; /* eventid associated with PMD */ -} pfm_ovfl_arg_t; - - -typedef struct { - char *fmt_name; - pfm_uuid_t fmt_uuid; - size_t fmt_arg_size; - unsigned long fmt_flags; - - int (*fmt_validate)(struct task_struct *task, unsigned int flags, int cpu, void *arg); - int (*fmt_getsize)(struct task_struct *task, unsigned int flags, int cpu, void *arg, unsigned long *size); - int (*fmt_init)(struct task_struct *task, void *buf, unsigned int flags, int cpu, void *arg); - int (*fmt_handler)(struct task_struct *task, void *buf, pfm_ovfl_arg_t *arg, struct pt_regs *regs, unsigned long stamp); - int (*fmt_restart)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs); - int (*fmt_restart_active)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs); - int (*fmt_exit)(struct task_struct *task, void *buf, struct pt_regs *regs); - - struct list_head fmt_list; -} pfm_buffer_fmt_t; - -extern int pfm_register_buffer_fmt(pfm_buffer_fmt_t *fmt); -extern int pfm_unregister_buffer_fmt(pfm_uuid_t uuid); - -/* - * perfmon interface exported to modules - */ -extern int pfm_mod_read_pmds(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs); -extern int pfm_mod_write_pmcs(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs); -extern int pfm_mod_write_ibrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs); -extern int pfm_mod_write_dbrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs); - -/* - * describe the content of the local_cpu_date->pfm_syst_info field - */ -#define PFM_CPUINFO_SYST_WIDE 0x1 /* if set a system wide session exists */ -#define PFM_CPUINFO_DCR_PP 0x2 /* if set the system wide session has started */ -#define PFM_CPUINFO_EXCL_IDLE 0x4 /* the system wide session excludes the idle task */ - -/* - * sysctl control structure. visible to sampling formats - */ -typedef struct { - int debug; /* turn on/off debugging via syslog */ - int debug_ovfl; /* turn on/off debug printk in overflow handler */ - int fastctxsw; /* turn on/off fast (unsecure) ctxsw */ - int expert_mode; /* turn on/off value checking */ -} pfm_sysctl_t; -extern pfm_sysctl_t pfm_sysctl; - - -#endif /* __KERNEL__ */ - -#endif /* _ASM_IA64_PERFMON_H */ diff --git a/include/asm-ia64/perfmon_default_smpl.h b/include/asm-ia64/perfmon_default_smpl.h deleted file mode 100644 index 48822c0811d8..000000000000 --- a/include/asm-ia64/perfmon_default_smpl.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Copyright (C) 2002-2003 Hewlett-Packard Co - * Stephane Eranian - * - * This file implements the default sampling buffer format - * for Linux/ia64 perfmon subsystem. - */ -#ifndef __PERFMON_DEFAULT_SMPL_H__ -#define __PERFMON_DEFAULT_SMPL_H__ 1 - -#define PFM_DEFAULT_SMPL_UUID { \ - 0x4d, 0x72, 0xbe, 0xc0, 0x06, 0x64, 0x41, 0x43, 0x82, 0xb4, 0xd3, 0xfd, 0x27, 0x24, 0x3c, 0x97} - -/* - * format specific parameters (passed at context creation) - */ -typedef struct { - unsigned long buf_size; /* size of the buffer in bytes */ - unsigned int flags; /* buffer specific flags */ - unsigned int res1; /* for future use */ - unsigned long reserved[2]; /* for future use */ -} pfm_default_smpl_arg_t; - -/* - * combined context+format specific structure. Can be passed - * to PFM_CONTEXT_CREATE - */ -typedef struct { - pfarg_context_t ctx_arg; - pfm_default_smpl_arg_t buf_arg; -} pfm_default_smpl_ctx_arg_t; - -/* - * This header is at the beginning of the sampling buffer returned to the user. - * It is directly followed by the first record. - */ -typedef struct { - unsigned long hdr_count; /* how many valid entries */ - unsigned long hdr_cur_offs; /* current offset from top of buffer */ - unsigned long hdr_reserved2; /* reserved for future use */ - - unsigned long hdr_overflows; /* how many times the buffer overflowed */ - unsigned long hdr_buf_size; /* how many bytes in the buffer */ - - unsigned int hdr_version; /* contains perfmon version (smpl format diffs) */ - unsigned int hdr_reserved1; /* for future use */ - unsigned long hdr_reserved[10]; /* for future use */ -} pfm_default_smpl_hdr_t; - -/* - * Entry header in the sampling buffer. The header is directly followed - * with the values of the PMD registers of interest saved in increasing - * index order: PMD4, PMD5, and so on. How many PMDs are present depends - * on how the session was programmed. - * - * In the case where multiple counters overflow at the same time, multiple - * entries are written consecutively. - * - * last_reset_value member indicates the initial value of the overflowed PMD. - */ -typedef struct { - int pid; /* thread id (for NPTL, this is gettid()) */ - unsigned char reserved1[3]; /* reserved for future use */ - unsigned char ovfl_pmd; /* index of overflowed PMD */ - - unsigned long last_reset_val; /* initial value of overflowed PMD */ - unsigned long ip; /* where did the overflow interrupt happened */ - unsigned long tstamp; /* ar.itc when entering perfmon intr. handler */ - - unsigned short cpu; /* cpu on which the overfow occured */ - unsigned short set; /* event set active when overflow ocurred */ - int tgid; /* thread group id (for NPTL, this is getpid()) */ -} pfm_default_smpl_entry_t; - -#define PFM_DEFAULT_MAX_PMDS 64 /* how many pmds supported by data structures (sizeof(unsigned long) */ -#define PFM_DEFAULT_MAX_ENTRY_SIZE (sizeof(pfm_default_smpl_entry_t)+(sizeof(unsigned long)*PFM_DEFAULT_MAX_PMDS)) -#define PFM_DEFAULT_SMPL_MIN_BUF_SIZE (sizeof(pfm_default_smpl_hdr_t)+PFM_DEFAULT_MAX_ENTRY_SIZE) - -#define PFM_DEFAULT_SMPL_VERSION_MAJ 2U -#define PFM_DEFAULT_SMPL_VERSION_MIN 0U -#define PFM_DEFAULT_SMPL_VERSION (((PFM_DEFAULT_SMPL_VERSION_MAJ&0xffff)<<16)|(PFM_DEFAULT_SMPL_VERSION_MIN & 0xffff)) - -#endif /* __PERFMON_DEFAULT_SMPL_H__ */ diff --git a/include/asm-ia64/pgalloc.h b/include/asm-ia64/pgalloc.h deleted file mode 100644 index b9ac1a6fc216..000000000000 --- a/include/asm-ia64/pgalloc.h +++ /dev/null @@ -1,122 +0,0 @@ -#ifndef _ASM_IA64_PGALLOC_H -#define _ASM_IA64_PGALLOC_H - -/* - * This file contains the functions and defines necessary to allocate - * page tables. - * - * This hopefully works with any (fixed) ia-64 page-size, as defined - * in (currently 8192). - * - * Copyright (C) 1998-2001 Hewlett-Packard Co - * David Mosberger-Tang - * Copyright (C) 2000, Goutham Rao - */ - - -#include -#include -#include -#include -#include - -#include - -static inline pgd_t *pgd_alloc(struct mm_struct *mm) -{ - return quicklist_alloc(0, GFP_KERNEL, NULL); -} - -static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - quicklist_free(0, NULL, pgd); -} - -#ifdef CONFIG_PGTABLE_4 -static inline void -pgd_populate(struct mm_struct *mm, pgd_t * pgd_entry, pud_t * pud) -{ - pgd_val(*pgd_entry) = __pa(pud); -} - -static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) -{ - return quicklist_alloc(0, GFP_KERNEL, NULL); -} - -static inline void pud_free(struct mm_struct *mm, pud_t *pud) -{ - quicklist_free(0, NULL, pud); -} -#define __pud_free_tlb(tlb, pud) pud_free((tlb)->mm, pud) -#endif /* CONFIG_PGTABLE_4 */ - -static inline void -pud_populate(struct mm_struct *mm, pud_t * pud_entry, pmd_t * pmd) -{ - pud_val(*pud_entry) = __pa(pmd); -} - -static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) -{ - return quicklist_alloc(0, GFP_KERNEL, NULL); -} - -static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) -{ - quicklist_free(0, NULL, pmd); -} - -#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd) - -static inline void -pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, pgtable_t pte) -{ - pmd_val(*pmd_entry) = page_to_phys(pte); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -static inline void -pmd_populate_kernel(struct mm_struct *mm, pmd_t * pmd_entry, pte_t * pte) -{ - pmd_val(*pmd_entry) = __pa(pte); -} - -static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr) -{ - struct page *page; - void *pg; - - pg = quicklist_alloc(0, GFP_KERNEL, NULL); - if (!pg) - return NULL; - page = virt_to_page(pg); - pgtable_page_ctor(page); - return page; -} - -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long addr) -{ - return quicklist_alloc(0, GFP_KERNEL, NULL); -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t pte) -{ - pgtable_page_dtor(pte); - quicklist_free_page(0, NULL, pte); -} - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - quicklist_free(0, NULL, pte); -} - -static inline void check_pgt_cache(void) -{ - quicklist_trim(0, NULL, 25, 16); -} - -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) - -#endif /* _ASM_IA64_PGALLOC_H */ diff --git a/include/asm-ia64/pgtable.h b/include/asm-ia64/pgtable.h deleted file mode 100644 index 7a9bff47564f..000000000000 --- a/include/asm-ia64/pgtable.h +++ /dev/null @@ -1,615 +0,0 @@ -#ifndef _ASM_IA64_PGTABLE_H -#define _ASM_IA64_PGTABLE_H - -/* - * This file contains the functions and defines necessary to modify and use - * the IA-64 page table tree. - * - * This hopefully works with any (fixed) IA-64 page-size, as defined - * in . - * - * Copyright (C) 1998-2005 Hewlett-Packard Co - * David Mosberger-Tang - */ - - -#include -#include -#include -#include -#include - -#define IA64_MAX_PHYS_BITS 50 /* max. number of physical address bits (architected) */ - -/* - * First, define the various bits in a PTE. Note that the PTE format - * matches the VHPT short format, the firt doubleword of the VHPD long - * format, and the first doubleword of the TLB insertion format. - */ -#define _PAGE_P_BIT 0 -#define _PAGE_A_BIT 5 -#define _PAGE_D_BIT 6 - -#define _PAGE_P (1 << _PAGE_P_BIT) /* page present bit */ -#define _PAGE_MA_WB (0x0 << 2) /* write back memory attribute */ -#define _PAGE_MA_UC (0x4 << 2) /* uncacheable memory attribute */ -#define _PAGE_MA_UCE (0x5 << 2) /* UC exported attribute */ -#define _PAGE_MA_WC (0x6 << 2) /* write coalescing memory attribute */ -#define _PAGE_MA_NAT (0x7 << 2) /* not-a-thing attribute */ -#define _PAGE_MA_MASK (0x7 << 2) -#define _PAGE_PL_0 (0 << 7) /* privilege level 0 (kernel) */ -#define _PAGE_PL_1 (1 << 7) /* privilege level 1 (unused) */ -#define _PAGE_PL_2 (2 << 7) /* privilege level 2 (unused) */ -#define _PAGE_PL_3 (3 << 7) /* privilege level 3 (user) */ -#define _PAGE_PL_MASK (3 << 7) -#define _PAGE_AR_R (0 << 9) /* read only */ -#define _PAGE_AR_RX (1 << 9) /* read & execute */ -#define _PAGE_AR_RW (2 << 9) /* read & write */ -#define _PAGE_AR_RWX (3 << 9) /* read, write & execute */ -#define _PAGE_AR_R_RW (4 << 9) /* read / read & write */ -#define _PAGE_AR_RX_RWX (5 << 9) /* read & exec / read, write & exec */ -#define _PAGE_AR_RWX_RW (6 << 9) /* read, write & exec / read & write */ -#define _PAGE_AR_X_RX (7 << 9) /* exec & promote / read & exec */ -#define _PAGE_AR_MASK (7 << 9) -#define _PAGE_AR_SHIFT 9 -#define _PAGE_A (1 << _PAGE_A_BIT) /* page accessed bit */ -#define _PAGE_D (1 << _PAGE_D_BIT) /* page dirty bit */ -#define _PAGE_PPN_MASK (((__IA64_UL(1) << IA64_MAX_PHYS_BITS) - 1) & ~0xfffUL) -#define _PAGE_ED (__IA64_UL(1) << 52) /* exception deferral */ -#define _PAGE_PROTNONE (__IA64_UL(1) << 63) - -/* Valid only for a PTE with the present bit cleared: */ -#define _PAGE_FILE (1 << 1) /* see swap & file pte remarks below */ - -#define _PFN_MASK _PAGE_PPN_MASK -/* Mask of bits which may be changed by pte_modify(); the odd bits are there for _PAGE_PROTNONE */ -#define _PAGE_CHG_MASK (_PAGE_P | _PAGE_PROTNONE | _PAGE_PL_MASK | _PAGE_AR_MASK | _PAGE_ED) - -#define _PAGE_SIZE_4K 12 -#define _PAGE_SIZE_8K 13 -#define _PAGE_SIZE_16K 14 -#define _PAGE_SIZE_64K 16 -#define _PAGE_SIZE_256K 18 -#define _PAGE_SIZE_1M 20 -#define _PAGE_SIZE_4M 22 -#define _PAGE_SIZE_16M 24 -#define _PAGE_SIZE_64M 26 -#define _PAGE_SIZE_256M 28 -#define _PAGE_SIZE_1G 30 -#define _PAGE_SIZE_4G 32 - -#define __ACCESS_BITS _PAGE_ED | _PAGE_A | _PAGE_P | _PAGE_MA_WB -#define __DIRTY_BITS_NO_ED _PAGE_A | _PAGE_P | _PAGE_D | _PAGE_MA_WB -#define __DIRTY_BITS _PAGE_ED | __DIRTY_BITS_NO_ED - -/* - * How many pointers will a page table level hold expressed in shift - */ -#define PTRS_PER_PTD_SHIFT (PAGE_SHIFT-3) - -/* - * Definitions for fourth level: - */ -#define PTRS_PER_PTE (__IA64_UL(1) << (PTRS_PER_PTD_SHIFT)) - -/* - * Definitions for third level: - * - * PMD_SHIFT determines the size of the area a third-level page table - * can map. - */ -#define PMD_SHIFT (PAGE_SHIFT + (PTRS_PER_PTD_SHIFT)) -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) -#define PTRS_PER_PMD (1UL << (PTRS_PER_PTD_SHIFT)) - -#ifdef CONFIG_PGTABLE_4 -/* - * Definitions for second level: - * - * PUD_SHIFT determines the size of the area a second-level page table - * can map. - */ -#define PUD_SHIFT (PMD_SHIFT + (PTRS_PER_PTD_SHIFT)) -#define PUD_SIZE (1UL << PUD_SHIFT) -#define PUD_MASK (~(PUD_SIZE-1)) -#define PTRS_PER_PUD (1UL << (PTRS_PER_PTD_SHIFT)) -#endif - -/* - * Definitions for first level: - * - * PGDIR_SHIFT determines what a first-level page table entry can map. - */ -#ifdef CONFIG_PGTABLE_4 -#define PGDIR_SHIFT (PUD_SHIFT + (PTRS_PER_PTD_SHIFT)) -#else -#define PGDIR_SHIFT (PMD_SHIFT + (PTRS_PER_PTD_SHIFT)) -#endif -#define PGDIR_SIZE (__IA64_UL(1) << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) -#define PTRS_PER_PGD_SHIFT PTRS_PER_PTD_SHIFT -#define PTRS_PER_PGD (1UL << PTRS_PER_PGD_SHIFT) -#define USER_PTRS_PER_PGD (5*PTRS_PER_PGD/8) /* regions 0-4 are user regions */ -#define FIRST_USER_ADDRESS 0 - -/* - * All the normal masks have the "page accessed" bits on, as any time - * they are used, the page is accessed. They are cleared only by the - * page-out routines. - */ -#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_A) -#define PAGE_SHARED __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RW) -#define PAGE_READONLY __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R) -#define PAGE_COPY __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R) -#define PAGE_COPY_EXEC __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX) -#define PAGE_GATE __pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_X_RX) -#define PAGE_KERNEL __pgprot(__DIRTY_BITS | _PAGE_PL_0 | _PAGE_AR_RWX) -#define PAGE_KERNELRX __pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_RX) - -# ifndef __ASSEMBLY__ - -#include /* for mm_struct */ -#include -#include -#include -#include - -/* - * Next come the mappings that determine how mmap() protection bits - * (PROT_EXEC, PROT_READ, PROT_WRITE, PROT_NONE) get implemented. The - * _P version gets used for a private shared memory segment, the _S - * version gets used for a shared memory segment with MAP_SHARED on. - * In a private shared memory segment, we do a copy-on-write if a task - * attempts to write to the page. - */ - /* xwr */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY -#define __P010 PAGE_READONLY /* write to priv pg -> copy & make writable */ -#define __P011 PAGE_READONLY /* ditto */ -#define __P100 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX) -#define __P101 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX) -#define __P110 PAGE_COPY_EXEC -#define __P111 PAGE_COPY_EXEC - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY -#define __S010 PAGE_SHARED /* we don't have (and don't need) write-only */ -#define __S011 PAGE_SHARED -#define __S100 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX) -#define __S101 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX) -#define __S110 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX) -#define __S111 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX) - -#define pgd_ERROR(e) printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e)) -#ifdef CONFIG_PGTABLE_4 -#define pud_ERROR(e) printk("%s:%d: bad pud %016lx.\n", __FILE__, __LINE__, pud_val(e)) -#endif -#define pmd_ERROR(e) printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e)) -#define pte_ERROR(e) printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e)) - - -/* - * Some definitions to translate between mem_map, PTEs, and page addresses: - */ - - -/* Quick test to see if ADDR is a (potentially) valid physical address. */ -static inline long -ia64_phys_addr_valid (unsigned long addr) -{ - return (addr & (local_cpu_data->unimpl_pa_mask)) == 0; -} - -/* - * kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel - * memory. For the return value to be meaningful, ADDR must be >= - * PAGE_OFFSET. This operation can be relatively expensive (e.g., - * require a hash-, or multi-level tree-lookup or something of that - * sort) but it guarantees to return TRUE only if accessing the page - * at that address does not cause an error. Note that there may be - * addresses for which kern_addr_valid() returns FALSE even though an - * access would not cause an error (e.g., this is typically true for - * memory mapped I/O regions. - * - * XXX Need to implement this for IA-64. - */ -#define kern_addr_valid(addr) (1) - - -/* - * Now come the defines and routines to manage and access the three-level - * page table. - */ - - -#define VMALLOC_START (RGN_BASE(RGN_GATE) + 0x200000000UL) -#ifdef CONFIG_VIRTUAL_MEM_MAP -# define VMALLOC_END_INIT (RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 9))) -# define VMALLOC_END vmalloc_end - extern unsigned long vmalloc_end; -#else -#if defined(CONFIG_SPARSEMEM) && defined(CONFIG_SPARSEMEM_VMEMMAP) -/* SPARSEMEM_VMEMMAP uses half of vmalloc... */ -# define VMALLOC_END (RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 10))) -# define vmemmap ((struct page *)VMALLOC_END) -#else -# define VMALLOC_END (RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 9))) -#endif -#endif - -/* fs/proc/kcore.c */ -#define kc_vaddr_to_offset(v) ((v) - RGN_BASE(RGN_GATE)) -#define kc_offset_to_vaddr(o) ((o) + RGN_BASE(RGN_GATE)) - -#define RGN_MAP_SHIFT (PGDIR_SHIFT + PTRS_PER_PGD_SHIFT - 3) -#define RGN_MAP_LIMIT ((1UL << RGN_MAP_SHIFT) - PAGE_SIZE) /* per region addr limit */ - -/* - * Conversion functions: convert page frame number (pfn) and a protection value to a page - * table entry (pte). - */ -#define pfn_pte(pfn, pgprot) \ -({ pte_t __pte; pte_val(__pte) = ((pfn) << PAGE_SHIFT) | pgprot_val(pgprot); __pte; }) - -/* Extract pfn from pte. */ -#define pte_pfn(_pte) ((pte_val(_pte) & _PFN_MASK) >> PAGE_SHIFT) - -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) - -/* This takes a physical page address that is used by the remapping functions */ -#define mk_pte_phys(physpage, pgprot) \ -({ pte_t __pte; pte_val(__pte) = physpage + pgprot_val(pgprot); __pte; }) - -#define pte_modify(_pte, newprot) \ - (__pte((pte_val(_pte) & ~_PAGE_CHG_MASK) | (pgprot_val(newprot) & _PAGE_CHG_MASK))) - -#define pte_none(pte) (!pte_val(pte)) -#define pte_present(pte) (pte_val(pte) & (_PAGE_P | _PAGE_PROTNONE)) -#define pte_clear(mm,addr,pte) (pte_val(*(pte)) = 0UL) -/* pte_page() returns the "struct page *" corresponding to the PTE: */ -#define pte_page(pte) virt_to_page(((pte_val(pte) & _PFN_MASK) + PAGE_OFFSET)) - -#define pmd_none(pmd) (!pmd_val(pmd)) -#define pmd_bad(pmd) (!ia64_phys_addr_valid(pmd_val(pmd))) -#define pmd_present(pmd) (pmd_val(pmd) != 0UL) -#define pmd_clear(pmdp) (pmd_val(*(pmdp)) = 0UL) -#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val(pmd) & _PFN_MASK)) -#define pmd_page(pmd) virt_to_page((pmd_val(pmd) + PAGE_OFFSET)) - -#define pud_none(pud) (!pud_val(pud)) -#define pud_bad(pud) (!ia64_phys_addr_valid(pud_val(pud))) -#define pud_present(pud) (pud_val(pud) != 0UL) -#define pud_clear(pudp) (pud_val(*(pudp)) = 0UL) -#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & _PFN_MASK)) -#define pud_page(pud) virt_to_page((pud_val(pud) + PAGE_OFFSET)) - -#ifdef CONFIG_PGTABLE_4 -#define pgd_none(pgd) (!pgd_val(pgd)) -#define pgd_bad(pgd) (!ia64_phys_addr_valid(pgd_val(pgd))) -#define pgd_present(pgd) (pgd_val(pgd) != 0UL) -#define pgd_clear(pgdp) (pgd_val(*(pgdp)) = 0UL) -#define pgd_page_vaddr(pgd) ((unsigned long) __va(pgd_val(pgd) & _PFN_MASK)) -#define pgd_page(pgd) virt_to_page((pgd_val(pgd) + PAGE_OFFSET)) -#endif - -/* - * The following have defined behavior only work if pte_present() is true. - */ -#define pte_write(pte) ((unsigned) (((pte_val(pte) & _PAGE_AR_MASK) >> _PAGE_AR_SHIFT) - 2) <= 4) -#define pte_exec(pte) ((pte_val(pte) & _PAGE_AR_RX) != 0) -#define pte_dirty(pte) ((pte_val(pte) & _PAGE_D) != 0) -#define pte_young(pte) ((pte_val(pte) & _PAGE_A) != 0) -#define pte_file(pte) ((pte_val(pte) & _PAGE_FILE) != 0) -#define pte_special(pte) 0 - -/* - * Note: we convert AR_RWX to AR_RX and AR_RW to AR_R by clearing the 2nd bit in the - * access rights: - */ -#define pte_wrprotect(pte) (__pte(pte_val(pte) & ~_PAGE_AR_RW)) -#define pte_mkwrite(pte) (__pte(pte_val(pte) | _PAGE_AR_RW)) -#define pte_mkold(pte) (__pte(pte_val(pte) & ~_PAGE_A)) -#define pte_mkyoung(pte) (__pte(pte_val(pte) | _PAGE_A)) -#define pte_mkclean(pte) (__pte(pte_val(pte) & ~_PAGE_D)) -#define pte_mkdirty(pte) (__pte(pte_val(pte) | _PAGE_D)) -#define pte_mkhuge(pte) (__pte(pte_val(pte))) -#define pte_mkspecial(pte) (pte) - -/* - * Because ia64's Icache and Dcache is not coherent (on a cpu), we need to - * sync icache and dcache when we insert *new* executable page. - * __ia64_sync_icache_dcache() check Pg_arch_1 bit and flush icache - * if necessary. - * - * set_pte() is also called by the kernel, but we can expect that the kernel - * flushes icache explicitly if necessary. - */ -#define pte_present_exec_user(pte)\ - ((pte_val(pte) & (_PAGE_P | _PAGE_PL_MASK | _PAGE_AR_RX)) == \ - (_PAGE_P | _PAGE_PL_3 | _PAGE_AR_RX)) - -extern void __ia64_sync_icache_dcache(pte_t pteval); -static inline void set_pte(pte_t *ptep, pte_t pteval) -{ - /* page is present && page is user && page is executable - * && (page swapin or new page or page migraton - * || copy_on_write with page copying.) - */ - if (pte_present_exec_user(pteval) && - (!pte_present(*ptep) || - pte_pfn(*ptep) != pte_pfn(pteval))) - /* load_module() calles flush_icache_range() explicitly*/ - __ia64_sync_icache_dcache(pteval); - *ptep = pteval; -} - -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) - -/* - * Make page protection values cacheable, uncacheable, or write- - * combining. Note that "protection" is really a misnomer here as the - * protection value contains the memory attribute bits, dirty bits, and - * various other bits as well. - */ -#define pgprot_cacheable(prot) __pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_WB) -#define pgprot_noncached(prot) __pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_UC) -#define pgprot_writecombine(prot) __pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_WC) - -struct file; -extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, - unsigned long size, pgprot_t vma_prot); -#define __HAVE_PHYS_MEM_ACCESS_PROT - -static inline unsigned long -pgd_index (unsigned long address) -{ - unsigned long region = address >> 61; - unsigned long l1index = (address >> PGDIR_SHIFT) & ((PTRS_PER_PGD >> 3) - 1); - - return (region << (PAGE_SHIFT - 6)) | l1index; -} - -/* The offset in the 1-level directory is given by the 3 region bits - (61..63) and the level-1 bits. */ -static inline pgd_t* -pgd_offset (const struct mm_struct *mm, unsigned long address) -{ - return mm->pgd + pgd_index(address); -} - -/* In the kernel's mapped region we completely ignore the region number - (since we know it's in region number 5). */ -#define pgd_offset_k(addr) \ - (init_mm.pgd + (((addr) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))) - -/* Look up a pgd entry in the gate area. On IA-64, the gate-area - resides in the kernel-mapped segment, hence we use pgd_offset_k() - here. */ -#define pgd_offset_gate(mm, addr) pgd_offset_k(addr) - -#ifdef CONFIG_PGTABLE_4 -/* Find an entry in the second-level page table.. */ -#define pud_offset(dir,addr) \ - ((pud_t *) pgd_page_vaddr(*(dir)) + (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))) -#endif - -/* Find an entry in the third-level page table.. */ -#define pmd_offset(dir,addr) \ - ((pmd_t *) pud_page_vaddr(*(dir)) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))) - -/* - * Find an entry in the third-level page table. This looks more complicated than it - * should be because some platforms place page tables in high memory. - */ -#define pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset_kernel(dir,addr) ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr)) -#define pte_offset_map(dir,addr) pte_offset_kernel(dir, addr) -#define pte_offset_map_nested(dir,addr) pte_offset_map(dir, addr) -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) - -/* atomic versions of the some PTE manipulations: */ - -static inline int -ptep_test_and_clear_young (struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) -{ -#ifdef CONFIG_SMP - if (!pte_young(*ptep)) - return 0; - return test_and_clear_bit(_PAGE_A_BIT, ptep); -#else - pte_t pte = *ptep; - if (!pte_young(pte)) - return 0; - set_pte_at(vma->vm_mm, addr, ptep, pte_mkold(pte)); - return 1; -#endif -} - -static inline pte_t -ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ -#ifdef CONFIG_SMP - return __pte(xchg((long *) ptep, 0)); -#else - pte_t pte = *ptep; - pte_clear(mm, addr, ptep); - return pte; -#endif -} - -static inline void -ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ -#ifdef CONFIG_SMP - unsigned long new, old; - - do { - old = pte_val(*ptep); - new = pte_val(pte_wrprotect(__pte (old))); - } while (cmpxchg((unsigned long *) ptep, old, new) != old); -#else - pte_t old_pte = *ptep; - set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte)); -#endif -} - -static inline int -pte_same (pte_t a, pte_t b) -{ - return pte_val(a) == pte_val(b); -} - -#define update_mmu_cache(vma, address, pte) do { } while (0) - -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -extern void paging_init (void); - -/* - * Note: The macros below rely on the fact that MAX_SWAPFILES_SHIFT <= number of - * bits in the swap-type field of the swap pte. It would be nice to - * enforce that, but we can't easily include here. - * (Of course, better still would be to define MAX_SWAPFILES_SHIFT here...). - * - * Format of swap pte: - * bit 0 : present bit (must be zero) - * bit 1 : _PAGE_FILE (must be zero) - * bits 2- 8: swap-type - * bits 9-62: swap offset - * bit 63 : _PAGE_PROTNONE bit - * - * Format of file pte: - * bit 0 : present bit (must be zero) - * bit 1 : _PAGE_FILE (must be one) - * bits 2-62: file_offset/PAGE_SIZE - * bit 63 : _PAGE_PROTNONE bit - */ -#define __swp_type(entry) (((entry).val >> 2) & 0x7f) -#define __swp_offset(entry) (((entry).val << 1) >> 10) -#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((long) (offset) << 9) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -#define PTE_FILE_MAX_BITS 61 -#define pte_to_pgoff(pte) ((pte_val(pte) << 1) >> 3) -#define pgoff_to_pte(off) ((pte_t) { ((off) << 2) | _PAGE_FILE }) - -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)]; -extern struct page *zero_page_memmap_ptr; -#define ZERO_PAGE(vaddr) (zero_page_memmap_ptr) - -/* We provide our own get_unmapped_area to cope with VA holes for userland */ -#define HAVE_ARCH_UNMAPPED_AREA - -#ifdef CONFIG_HUGETLB_PAGE -#define HUGETLB_PGDIR_SHIFT (HPAGE_SHIFT + 2*(PAGE_SHIFT-3)) -#define HUGETLB_PGDIR_SIZE (__IA64_UL(1) << HUGETLB_PGDIR_SHIFT) -#define HUGETLB_PGDIR_MASK (~(HUGETLB_PGDIR_SIZE-1)) -#endif - - -#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS -/* - * Update PTEP with ENTRY, which is guaranteed to be a less - * restrictive PTE. That is, ENTRY may have the ACCESSED, DIRTY, and - * WRITABLE bits turned on, when the value at PTEP did not. The - * WRITABLE bit may only be turned if SAFELY_WRITABLE is TRUE. - * - * SAFELY_WRITABLE is TRUE if we can update the value at PTEP without - * having to worry about races. On SMP machines, there are only two - * cases where this is true: - * - * (1) *PTEP has the PRESENT bit turned OFF - * (2) ENTRY has the DIRTY bit turned ON - * - * On ia64, we could implement this routine with a cmpxchg()-loop - * which ORs in the _PAGE_A/_PAGE_D bit if they're set in ENTRY. - * However, like on x86, we can get a more streamlined version by - * observing that it is OK to drop ACCESSED bit updates when - * SAFELY_WRITABLE is FALSE. Besides being rare, all that would do is - * result in an extra Access-bit fault, which would then turn on the - * ACCESSED bit in the low-level fault handler (iaccess_bit or - * daccess_bit in ivt.S). - */ -#ifdef CONFIG_SMP -# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable) \ -({ \ - int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed && __safely_writable) { \ - set_pte(__ptep, __entry); \ - flush_tlb_page(__vma, __addr); \ - } \ - __changed; \ -}) -#else -# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable) \ -({ \ - int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ - set_pte_at((__vma)->vm_mm, (__addr), __ptep, __entry); \ - flush_tlb_page(__vma, __addr); \ - } \ - __changed; \ -}) -#endif - -# ifdef CONFIG_VIRTUAL_MEM_MAP - /* arch mem_map init routine is needed due to holes in a virtual mem_map */ -# define __HAVE_ARCH_MEMMAP_INIT - extern void memmap_init (unsigned long size, int nid, unsigned long zone, - unsigned long start_pfn); -# endif /* CONFIG_VIRTUAL_MEM_MAP */ -# endif /* !__ASSEMBLY__ */ - -/* - * Identity-mapped regions use a large page size. We'll call such large pages - * "granules". If you can think of a better name that's unambiguous, let me - * know... - */ -#if defined(CONFIG_IA64_GRANULE_64MB) -# define IA64_GRANULE_SHIFT _PAGE_SIZE_64M -#elif defined(CONFIG_IA64_GRANULE_16MB) -# define IA64_GRANULE_SHIFT _PAGE_SIZE_16M -#endif -#define IA64_GRANULE_SIZE (1 << IA64_GRANULE_SHIFT) -/* - * log2() of the page size we use to map the kernel image (IA64_TR_KERNEL): - */ -#define KERNEL_TR_PAGE_SHIFT _PAGE_SIZE_64M -#define KERNEL_TR_PAGE_SIZE (1 << KERNEL_TR_PAGE_SHIFT) - -/* - * No page table caches to initialise - */ -#define pgtable_cache_init() do { } while (0) - -/* These tell get_user_pages() that the first gate page is accessible from user-level. */ -#define FIXADDR_USER_START GATE_ADDR -#ifdef HAVE_BUGGY_SEGREL -# define FIXADDR_USER_END (GATE_ADDR + 2*PAGE_SIZE) -#else -# define FIXADDR_USER_END (GATE_ADDR + 2*PERCPU_PAGE_SIZE) -#endif - -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -#define __HAVE_ARCH_PTE_SAME -#define __HAVE_ARCH_PGD_OFFSET_GATE - - -#ifndef CONFIG_PGTABLE_4 -#include -#endif -#include - -#endif /* _ASM_IA64_PGTABLE_H */ diff --git a/include/asm-ia64/poll.h b/include/asm-ia64/poll.h deleted file mode 100644 index c98509d3149e..000000000000 --- a/include/asm-ia64/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-ia64/posix_types.h b/include/asm-ia64/posix_types.h deleted file mode 100644 index 17885567b731..000000000000 --- a/include/asm-ia64/posix_types.h +++ /dev/null @@ -1,126 +0,0 @@ -#ifndef _ASM_IA64_POSIX_TYPES_H -#define _ASM_IA64_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - * - * Based on . - * - * Modified 1998-2000, 2003 - * David Mosberger-Tang , Hewlett-Packard Co - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned int __kernel_mode_t; -typedef unsigned int __kernel_nlink_t; -typedef long __kernel_off_t; -typedef long long __kernel_loff_t; -typedef int __kernel_pid_t; -typedef int __kernel_ipc_pid_t; -typedef unsigned int __kernel_uid_t; -typedef unsigned int __kernel_gid_t; -typedef unsigned long __kernel_size_t; -typedef long __kernel_ssize_t; -typedef long __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned long __kernel_sigset_t; /* at least 32 bits */ -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -typedef __kernel_uid_t __kernel_old_uid_t; -typedef __kernel_gid_t __kernel_old_gid_t; -typedef __kernel_uid_t __kernel_uid32_t; -typedef __kernel_gid_t __kernel_gid32_t; - -typedef unsigned int __kernel_old_dev_t; - -# ifdef __KERNEL__ - -# ifndef __GNUC__ - -#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) -#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) -#define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0) -#define __FD_ZERO(set) \ - ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set))) - -# else /* !__GNUC__ */ - -/* With GNU C, use inline functions instead so args are evaluated only once: */ - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - fdsetp->fds_bits[_tmp] |= (1UL<<_rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); -} - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long fd, const __kernel_fd_set *p) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *p) -{ - unsigned long *tmp = p->fds_bits; - int i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; - tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; - tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0; - tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0; - return; - - case 8: - tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; - tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; - return; - - case 4: - tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; - return; - } - } - i = __FDSET_LONGS; - while (i) { - i--; - *tmp = 0; - tmp++; - } -} - -# endif /* !__GNUC__ */ -# endif /* __KERNEL__ */ -#endif /* _ASM_IA64_POSIX_TYPES_H */ diff --git a/include/asm-ia64/processor.h b/include/asm-ia64/processor.h deleted file mode 100644 index f88fa054d01d..000000000000 --- a/include/asm-ia64/processor.h +++ /dev/null @@ -1,771 +0,0 @@ -#ifndef _ASM_IA64_PROCESSOR_H -#define _ASM_IA64_PROCESSOR_H - -/* - * Copyright (C) 1998-2004 Hewlett-Packard Co - * David Mosberger-Tang - * Stephane Eranian - * Copyright (C) 1999 Asit Mallick - * Copyright (C) 1999 Don Dugger - * - * 11/24/98 S.Eranian added ia64_set_iva() - * 12/03/99 D. Mosberger implement thread_saved_pc() via kernel unwind API - * 06/16/00 A. Mallick added csd/ssd/tssd for ia32 support - */ - - -#include -#include -#include -#include - -#define IA64_NUM_PHYS_STACK_REG 96 -#define IA64_NUM_DBG_REGS 8 - -#define DEFAULT_MAP_BASE __IA64_UL_CONST(0x2000000000000000) -#define DEFAULT_TASK_SIZE __IA64_UL_CONST(0xa000000000000000) - -/* - * TASK_SIZE really is a mis-named. It really is the maximum user - * space address (plus one). On IA-64, there are five regions of 2TB - * each (assuming 8KB page size), for a total of 8TB of user virtual - * address space. - */ -#define TASK_SIZE_OF(tsk) ((tsk)->thread.task_size) -#define TASK_SIZE TASK_SIZE_OF(current) - -/* - * This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE (current->thread.map_base) - -#define IA64_THREAD_FPH_VALID (__IA64_UL(1) << 0) /* floating-point high state valid? */ -#define IA64_THREAD_DBG_VALID (__IA64_UL(1) << 1) /* debug registers valid? */ -#define IA64_THREAD_PM_VALID (__IA64_UL(1) << 2) /* performance registers valid? */ -#define IA64_THREAD_UAC_NOPRINT (__IA64_UL(1) << 3) /* don't log unaligned accesses */ -#define IA64_THREAD_UAC_SIGBUS (__IA64_UL(1) << 4) /* generate SIGBUS on unaligned acc. */ -#define IA64_THREAD_MIGRATION (__IA64_UL(1) << 5) /* require migration - sync at ctx sw */ -#define IA64_THREAD_FPEMU_NOPRINT (__IA64_UL(1) << 6) /* don't log any fpswa faults */ -#define IA64_THREAD_FPEMU_SIGFPE (__IA64_UL(1) << 7) /* send a SIGFPE for fpswa faults */ - -#define IA64_THREAD_UAC_SHIFT 3 -#define IA64_THREAD_UAC_MASK (IA64_THREAD_UAC_NOPRINT | IA64_THREAD_UAC_SIGBUS) -#define IA64_THREAD_FPEMU_SHIFT 6 -#define IA64_THREAD_FPEMU_MASK (IA64_THREAD_FPEMU_NOPRINT | IA64_THREAD_FPEMU_SIGFPE) - - -/* - * This shift should be large enough to be able to represent 1000000000/itc_freq with good - * accuracy while being small enough to fit 10*1000000000< -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_NUMA -#include -#endif - -/* like above but expressed as bitfields for more efficient access: */ -struct ia64_psr { - __u64 reserved0 : 1; - __u64 be : 1; - __u64 up : 1; - __u64 ac : 1; - __u64 mfl : 1; - __u64 mfh : 1; - __u64 reserved1 : 7; - __u64 ic : 1; - __u64 i : 1; - __u64 pk : 1; - __u64 reserved2 : 1; - __u64 dt : 1; - __u64 dfl : 1; - __u64 dfh : 1; - __u64 sp : 1; - __u64 pp : 1; - __u64 di : 1; - __u64 si : 1; - __u64 db : 1; - __u64 lp : 1; - __u64 tb : 1; - __u64 rt : 1; - __u64 reserved3 : 4; - __u64 cpl : 2; - __u64 is : 1; - __u64 mc : 1; - __u64 it : 1; - __u64 id : 1; - __u64 da : 1; - __u64 dd : 1; - __u64 ss : 1; - __u64 ri : 2; - __u64 ed : 1; - __u64 bn : 1; - __u64 reserved4 : 19; -}; - -union ia64_isr { - __u64 val; - struct { - __u64 code : 16; - __u64 vector : 8; - __u64 reserved1 : 8; - __u64 x : 1; - __u64 w : 1; - __u64 r : 1; - __u64 na : 1; - __u64 sp : 1; - __u64 rs : 1; - __u64 ir : 1; - __u64 ni : 1; - __u64 so : 1; - __u64 ei : 2; - __u64 ed : 1; - __u64 reserved2 : 20; - }; -}; - -union ia64_lid { - __u64 val; - struct { - __u64 rv : 16; - __u64 eid : 8; - __u64 id : 8; - __u64 ig : 32; - }; -}; - -union ia64_tpr { - __u64 val; - struct { - __u64 ig0 : 4; - __u64 mic : 4; - __u64 rsv : 8; - __u64 mmi : 1; - __u64 ig1 : 47; - }; -}; - -union ia64_itir { - __u64 val; - struct { - __u64 rv3 : 2; /* 0-1 */ - __u64 ps : 6; /* 2-7 */ - __u64 key : 24; /* 8-31 */ - __u64 rv4 : 32; /* 32-63 */ - }; -}; - -union ia64_rr { - __u64 val; - struct { - __u64 ve : 1; /* enable hw walker */ - __u64 reserved0: 1; /* reserved */ - __u64 ps : 6; /* log page size */ - __u64 rid : 24; /* region id */ - __u64 reserved1: 32; /* reserved */ - }; -}; - -/* - * CPU type, hardware bug flags, and per-CPU state. Frequently used - * state comes earlier: - */ -struct cpuinfo_ia64 { - __u32 softirq_pending; - __u64 itm_delta; /* # of clock cycles between clock ticks */ - __u64 itm_next; /* interval timer mask value to use for next clock tick */ - __u64 nsec_per_cyc; /* (1000000000<thread.flags = (((task)->thread.flags & ~IA64_THREAD_UAC_MASK) \ - | (((value) << IA64_THREAD_UAC_SHIFT) & IA64_THREAD_UAC_MASK)); \ - 0; \ -}) -#define GET_UNALIGN_CTL(task,addr) \ -({ \ - put_user(((task)->thread.flags & IA64_THREAD_UAC_MASK) >> IA64_THREAD_UAC_SHIFT, \ - (int __user *) (addr)); \ -}) - -#define SET_FPEMU_CTL(task,value) \ -({ \ - (task)->thread.flags = (((task)->thread.flags & ~IA64_THREAD_FPEMU_MASK) \ - | (((value) << IA64_THREAD_FPEMU_SHIFT) & IA64_THREAD_FPEMU_MASK)); \ - 0; \ -}) -#define GET_FPEMU_CTL(task,addr) \ -({ \ - put_user(((task)->thread.flags & IA64_THREAD_FPEMU_MASK) >> IA64_THREAD_FPEMU_SHIFT, \ - (int __user *) (addr)); \ -}) - -#ifdef CONFIG_IA32_SUPPORT -struct desc_struct { - unsigned int a, b; -}; - -#define desc_empty(desc) (!((desc)->a | (desc)->b)) -#define desc_equal(desc1, desc2) (((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b)) - -#define GDT_ENTRY_TLS_ENTRIES 3 -#define GDT_ENTRY_TLS_MIN 6 -#define GDT_ENTRY_TLS_MAX (GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1) - -#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8) - -struct ia64_partial_page_list; -#endif - -struct thread_struct { - __u32 flags; /* various thread flags (see IA64_THREAD_*) */ - /* writing on_ustack is performance-critical, so it's worth spending 8 bits on it... */ - __u8 on_ustack; /* executing on user-stacks? */ - __u8 pad[3]; - __u64 ksp; /* kernel stack pointer */ - __u64 map_base; /* base address for get_unmapped_area() */ - __u64 task_size; /* limit for task size */ - __u64 rbs_bot; /* the base address for the RBS */ - int last_fph_cpu; /* CPU that may hold the contents of f32-f127 */ - -#ifdef CONFIG_IA32_SUPPORT - __u64 eflag; /* IA32 EFLAGS reg */ - __u64 fsr; /* IA32 floating pt status reg */ - __u64 fcr; /* IA32 floating pt control reg */ - __u64 fir; /* IA32 fp except. instr. reg */ - __u64 fdr; /* IA32 fp except. data reg */ - __u64 old_k1; /* old value of ar.k1 */ - __u64 old_iob; /* old IOBase value */ - struct ia64_partial_page_list *ppl; /* partial page list for 4K page size issue */ - /* cached TLS descriptors. */ - struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES]; - -# define INIT_THREAD_IA32 .eflag = 0, \ - .fsr = 0, \ - .fcr = 0x17800000037fULL, \ - .fir = 0, \ - .fdr = 0, \ - .old_k1 = 0, \ - .old_iob = 0, \ - .ppl = NULL, -#else -# define INIT_THREAD_IA32 -#endif /* CONFIG_IA32_SUPPORT */ -#ifdef CONFIG_PERFMON - void *pfm_context; /* pointer to detailed PMU context */ - unsigned long pfm_needs_checking; /* when >0, pending perfmon work on kernel exit */ -# define INIT_THREAD_PM .pfm_context = NULL, \ - .pfm_needs_checking = 0UL, -#else -# define INIT_THREAD_PM -#endif - __u64 dbr[IA64_NUM_DBG_REGS]; - __u64 ibr[IA64_NUM_DBG_REGS]; - struct ia64_fpreg fph[96]; /* saved/loaded on demand */ -}; - -#define INIT_THREAD { \ - .flags = 0, \ - .on_ustack = 0, \ - .ksp = 0, \ - .map_base = DEFAULT_MAP_BASE, \ - .rbs_bot = STACK_TOP - DEFAULT_USER_STACK_SIZE, \ - .task_size = DEFAULT_TASK_SIZE, \ - .last_fph_cpu = -1, \ - INIT_THREAD_IA32 \ - INIT_THREAD_PM \ - .dbr = {0, }, \ - .ibr = {0, }, \ - .fph = {{{{0}}}, } \ -} - -#define start_thread(regs,new_ip,new_sp) do { \ - set_fs(USER_DS); \ - regs->cr_ipsr = ((regs->cr_ipsr | (IA64_PSR_BITS_TO_SET | IA64_PSR_CPL)) \ - & ~(IA64_PSR_BITS_TO_CLEAR | IA64_PSR_RI | IA64_PSR_IS)); \ - regs->cr_iip = new_ip; \ - regs->ar_rsc = 0xf; /* eager mode, privilege level 3 */ \ - regs->ar_rnat = 0; \ - regs->ar_bspstore = current->thread.rbs_bot; \ - regs->ar_fpsr = FPSR_DEFAULT; \ - regs->loadrs = 0; \ - regs->r8 = get_dumpable(current->mm); /* set "don't zap registers" flag */ \ - regs->r12 = new_sp - 16; /* allocate 16 byte scratch area */ \ - if (unlikely(!get_dumpable(current->mm))) { \ - /* \ - * Zap scratch regs to avoid leaking bits between processes with different \ - * uid/privileges. \ - */ \ - regs->ar_pfs = 0; regs->b0 = 0; regs->pr = 0; \ - regs->r1 = 0; regs->r9 = 0; regs->r11 = 0; regs->r13 = 0; regs->r15 = 0; \ - } \ -} while (0) - -/* Forward declarations, a strange C thing... */ -struct mm_struct; -struct task_struct; - -/* - * Free all resources held by a thread. This is called after the - * parent of DEAD_TASK has collected the exit status of the task via - * wait(). - */ -#define release_thread(dead_task) - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -/* - * This is the mechanism for creating a new kernel thread. - * - * NOTE 1: Only a kernel-only process (ie the swapper or direct - * descendants who haven't done an "execve()") should use this: it - * will work within a system call from a "real" process, but the - * process memory space will not be free'd until both the parent and - * the child have exited. - * - * NOTE 2: This MUST NOT be an inlined function. Otherwise, we get - * into trouble in init/main.c when the child thread returns to - * do_basic_setup() and the timing is such that free_initmem() has - * been called already. - */ -extern pid_t kernel_thread (int (*fn)(void *), void *arg, unsigned long flags); - -/* Get wait channel for task P. */ -extern unsigned long get_wchan (struct task_struct *p); - -/* Return instruction pointer of blocked task TSK. */ -#define KSTK_EIP(tsk) \ - ({ \ - struct pt_regs *_regs = task_pt_regs(tsk); \ - _regs->cr_iip + ia64_psr(_regs)->ri; \ - }) - -/* Return stack pointer of blocked task TSK. */ -#define KSTK_ESP(tsk) ((tsk)->thread.ksp) - -extern void ia64_getreg_unknown_kr (void); -extern void ia64_setreg_unknown_kr (void); - -#define ia64_get_kr(regnum) \ -({ \ - unsigned long r = 0; \ - \ - switch (regnum) { \ - case 0: r = ia64_getreg(_IA64_REG_AR_KR0); break; \ - case 1: r = ia64_getreg(_IA64_REG_AR_KR1); break; \ - case 2: r = ia64_getreg(_IA64_REG_AR_KR2); break; \ - case 3: r = ia64_getreg(_IA64_REG_AR_KR3); break; \ - case 4: r = ia64_getreg(_IA64_REG_AR_KR4); break; \ - case 5: r = ia64_getreg(_IA64_REG_AR_KR5); break; \ - case 6: r = ia64_getreg(_IA64_REG_AR_KR6); break; \ - case 7: r = ia64_getreg(_IA64_REG_AR_KR7); break; \ - default: ia64_getreg_unknown_kr(); break; \ - } \ - r; \ -}) - -#define ia64_set_kr(regnum, r) \ -({ \ - switch (regnum) { \ - case 0: ia64_setreg(_IA64_REG_AR_KR0, r); break; \ - case 1: ia64_setreg(_IA64_REG_AR_KR1, r); break; \ - case 2: ia64_setreg(_IA64_REG_AR_KR2, r); break; \ - case 3: ia64_setreg(_IA64_REG_AR_KR3, r); break; \ - case 4: ia64_setreg(_IA64_REG_AR_KR4, r); break; \ - case 5: ia64_setreg(_IA64_REG_AR_KR5, r); break; \ - case 6: ia64_setreg(_IA64_REG_AR_KR6, r); break; \ - case 7: ia64_setreg(_IA64_REG_AR_KR7, r); break; \ - default: ia64_setreg_unknown_kr(); break; \ - } \ -}) - -/* - * The following three macros can't be inline functions because we don't have struct - * task_struct at this point. - */ - -/* - * Return TRUE if task T owns the fph partition of the CPU we're running on. - * Must be called from code that has preemption disabled. - */ -#define ia64_is_local_fpu_owner(t) \ -({ \ - struct task_struct *__ia64_islfo_task = (t); \ - (__ia64_islfo_task->thread.last_fph_cpu == smp_processor_id() \ - && __ia64_islfo_task == (struct task_struct *) ia64_get_kr(IA64_KR_FPU_OWNER)); \ -}) - -/* - * Mark task T as owning the fph partition of the CPU we're running on. - * Must be called from code that has preemption disabled. - */ -#define ia64_set_local_fpu_owner(t) do { \ - struct task_struct *__ia64_slfo_task = (t); \ - __ia64_slfo_task->thread.last_fph_cpu = smp_processor_id(); \ - ia64_set_kr(IA64_KR_FPU_OWNER, (unsigned long) __ia64_slfo_task); \ -} while (0) - -/* Mark the fph partition of task T as being invalid on all CPUs. */ -#define ia64_drop_fpu(t) ((t)->thread.last_fph_cpu = -1) - -extern void __ia64_init_fpu (void); -extern void __ia64_save_fpu (struct ia64_fpreg *fph); -extern void __ia64_load_fpu (struct ia64_fpreg *fph); -extern void ia64_save_debug_regs (unsigned long *save_area); -extern void ia64_load_debug_regs (unsigned long *save_area); - -#ifdef CONFIG_IA32_SUPPORT -extern void ia32_save_state (struct task_struct *task); -extern void ia32_load_state (struct task_struct *task); -#endif - -#define ia64_fph_enable() do { ia64_rsm(IA64_PSR_DFH); ia64_srlz_d(); } while (0) -#define ia64_fph_disable() do { ia64_ssm(IA64_PSR_DFH); ia64_srlz_d(); } while (0) - -/* load fp 0.0 into fph */ -static inline void -ia64_init_fpu (void) { - ia64_fph_enable(); - __ia64_init_fpu(); - ia64_fph_disable(); -} - -/* save f32-f127 at FPH */ -static inline void -ia64_save_fpu (struct ia64_fpreg *fph) { - ia64_fph_enable(); - __ia64_save_fpu(fph); - ia64_fph_disable(); -} - -/* load f32-f127 from FPH */ -static inline void -ia64_load_fpu (struct ia64_fpreg *fph) { - ia64_fph_enable(); - __ia64_load_fpu(fph); - ia64_fph_disable(); -} - -static inline __u64 -ia64_clear_ic (void) -{ - __u64 psr; - psr = ia64_getreg(_IA64_REG_PSR); - ia64_stop(); - ia64_rsm(IA64_PSR_I | IA64_PSR_IC); - ia64_srlz_i(); - return psr; -} - -/* - * Restore the psr. - */ -static inline void -ia64_set_psr (__u64 psr) -{ - ia64_stop(); - ia64_setreg(_IA64_REG_PSR_L, psr); - ia64_srlz_i(); -} - -/* - * Insert a translation into an instruction and/or data translation - * register. - */ -static inline void -ia64_itr (__u64 target_mask, __u64 tr_num, - __u64 vmaddr, __u64 pte, - __u64 log_page_size) -{ - ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2)); - ia64_setreg(_IA64_REG_CR_IFA, vmaddr); - ia64_stop(); - if (target_mask & 0x1) - ia64_itri(tr_num, pte); - if (target_mask & 0x2) - ia64_itrd(tr_num, pte); -} - -/* - * Insert a translation into the instruction and/or data translation - * cache. - */ -static inline void -ia64_itc (__u64 target_mask, __u64 vmaddr, __u64 pte, - __u64 log_page_size) -{ - ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2)); - ia64_setreg(_IA64_REG_CR_IFA, vmaddr); - ia64_stop(); - /* as per EAS2.6, itc must be the last instruction in an instruction group */ - if (target_mask & 0x1) - ia64_itci(pte); - if (target_mask & 0x2) - ia64_itcd(pte); -} - -/* - * Purge a range of addresses from instruction and/or data translation - * register(s). - */ -static inline void -ia64_ptr (__u64 target_mask, __u64 vmaddr, __u64 log_size) -{ - if (target_mask & 0x1) - ia64_ptri(vmaddr, (log_size << 2)); - if (target_mask & 0x2) - ia64_ptrd(vmaddr, (log_size << 2)); -} - -/* Set the interrupt vector address. The address must be suitably aligned (32KB). */ -static inline void -ia64_set_iva (void *ivt_addr) -{ - ia64_setreg(_IA64_REG_CR_IVA, (__u64) ivt_addr); - ia64_srlz_i(); -} - -/* Set the page table address and control bits. */ -static inline void -ia64_set_pta (__u64 pta) -{ - /* Note: srlz.i implies srlz.d */ - ia64_setreg(_IA64_REG_CR_PTA, pta); - ia64_srlz_i(); -} - -static inline void -ia64_eoi (void) -{ - ia64_setreg(_IA64_REG_CR_EOI, 0); - ia64_srlz_d(); -} - -#define cpu_relax() ia64_hint(ia64_hint_pause) - -static inline int -ia64_get_irr(unsigned int vector) -{ - unsigned int reg = vector / 64; - unsigned int bit = vector % 64; - u64 irr; - - switch (reg) { - case 0: irr = ia64_getreg(_IA64_REG_CR_IRR0); break; - case 1: irr = ia64_getreg(_IA64_REG_CR_IRR1); break; - case 2: irr = ia64_getreg(_IA64_REG_CR_IRR2); break; - case 3: irr = ia64_getreg(_IA64_REG_CR_IRR3); break; - } - - return test_bit(bit, &irr); -} - -static inline void -ia64_set_lrr0 (unsigned long val) -{ - ia64_setreg(_IA64_REG_CR_LRR0, val); - ia64_srlz_d(); -} - -static inline void -ia64_set_lrr1 (unsigned long val) -{ - ia64_setreg(_IA64_REG_CR_LRR1, val); - ia64_srlz_d(); -} - - -/* - * Given the address to which a spill occurred, return the unat bit - * number that corresponds to this address. - */ -static inline __u64 -ia64_unat_pos (void *spill_addr) -{ - return ((__u64) spill_addr >> 3) & 0x3f; -} - -/* - * Set the NaT bit of an integer register which was spilled at address - * SPILL_ADDR. UNAT is the mask to be updated. - */ -static inline void -ia64_set_unat (__u64 *unat, void *spill_addr, unsigned long nat) -{ - __u64 bit = ia64_unat_pos(spill_addr); - __u64 mask = 1UL << bit; - - *unat = (*unat & ~mask) | (nat << bit); -} - -/* - * Return saved PC of a blocked thread. - * Note that the only way T can block is through a call to schedule() -> switch_to(). - */ -static inline unsigned long -thread_saved_pc (struct task_struct *t) -{ - struct unw_frame_info info; - unsigned long ip; - - unw_init_from_blocked_task(&info, t); - if (unw_unwind(&info) < 0) - return 0; - unw_get_ip(&info, &ip); - return ip; -} - -/* - * Get the current instruction/program counter value. - */ -#define current_text_addr() \ - ({ void *_pc; _pc = (void *)ia64_getreg(_IA64_REG_IP); _pc; }) - -static inline __u64 -ia64_get_ivr (void) -{ - __u64 r; - ia64_srlz_d(); - r = ia64_getreg(_IA64_REG_CR_IVR); - ia64_srlz_d(); - return r; -} - -static inline void -ia64_set_dbr (__u64 regnum, __u64 value) -{ - __ia64_set_dbr(regnum, value); -#ifdef CONFIG_ITANIUM - ia64_srlz_d(); -#endif -} - -static inline __u64 -ia64_get_dbr (__u64 regnum) -{ - __u64 retval; - - retval = __ia64_get_dbr(regnum); -#ifdef CONFIG_ITANIUM - ia64_srlz_d(); -#endif - return retval; -} - -static inline __u64 -ia64_rotr (__u64 w, __u64 n) -{ - return (w >> n) | (w << (64 - n)); -} - -#define ia64_rotl(w,n) ia64_rotr((w), (64) - (n)) - -/* - * Take a mapped kernel address and return the equivalent address - * in the region 7 identity mapped virtual area. - */ -static inline void * -ia64_imva (void *addr) -{ - void *result; - result = (void *) ia64_tpa(addr); - return __va(result); -} - -#define ARCH_HAS_PREFETCH -#define ARCH_HAS_PREFETCHW -#define ARCH_HAS_SPINLOCK_PREFETCH -#define PREFETCH_STRIDE L1_CACHE_BYTES - -static inline void -prefetch (const void *x) -{ - ia64_lfetch(ia64_lfhint_none, x); -} - -static inline void -prefetchw (const void *x) -{ - ia64_lfetch_excl(ia64_lfhint_none, x); -} - -#define spin_lock_prefetch(x) prefetchw(x) - -extern unsigned long boot_option_idle_override; -extern unsigned long idle_halt; -extern unsigned long idle_nomwait; - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_IA64_PROCESSOR_H */ diff --git a/include/asm-ia64/ptrace.h b/include/asm-ia64/ptrace.h deleted file mode 100644 index 15f8dcfe6eee..000000000000 --- a/include/asm-ia64/ptrace.h +++ /dev/null @@ -1,364 +0,0 @@ -#ifndef _ASM_IA64_PTRACE_H -#define _ASM_IA64_PTRACE_H - -/* - * Copyright (C) 1998-2004 Hewlett-Packard Co - * David Mosberger-Tang - * Stephane Eranian - * Copyright (C) 2003 Intel Co - * Suresh Siddha - * Fenghua Yu - * Arun Sharma - * - * 12/07/98 S. Eranian added pt_regs & switch_stack - * 12/21/98 D. Mosberger updated to match latest code - * 6/17/99 D. Mosberger added second unat member to "struct switch_stack" - * - */ -/* - * When a user process is blocked, its state looks as follows: - * - * +----------------------+ ------- IA64_STK_OFFSET - * | | ^ - * | struct pt_regs | | - * | | | - * +----------------------+ | - * | | | - * | memory stack | | - * | (growing downwards) | | - * //.....................// | - * | - * //.....................// | - * | | | - * +----------------------+ | - * | struct switch_stack | | - * | | | - * +----------------------+ | - * | | | - * //.....................// | - * | - * //.....................// | - * | | | - * | register stack | | - * | (growing upwards) | | - * | | | - * +----------------------+ | --- IA64_RBS_OFFSET - * | struct thread_info | | ^ - * +----------------------+ | | - * | | | | - * | struct task_struct | | | - * current -> | | | | - * +----------------------+ ------- - * - * Note that ar.ec is not saved explicitly in pt_reg or switch_stack. - * This is because ar.ec is saved as part of ar.pfs. - */ - - -#include - -#ifdef __KERNEL__ -#ifndef ASM_OFFSETS_C -#include -#endif - -/* - * Base-2 logarithm of number of pages to allocate per task structure - * (including register backing store and memory stack): - */ -#if defined(CONFIG_IA64_PAGE_SIZE_4KB) -# define KERNEL_STACK_SIZE_ORDER 3 -#elif defined(CONFIG_IA64_PAGE_SIZE_8KB) -# define KERNEL_STACK_SIZE_ORDER 2 -#elif defined(CONFIG_IA64_PAGE_SIZE_16KB) -# define KERNEL_STACK_SIZE_ORDER 1 -#else -# define KERNEL_STACK_SIZE_ORDER 0 -#endif - -#define IA64_RBS_OFFSET ((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 31) & ~31) -#define IA64_STK_OFFSET ((1 << KERNEL_STACK_SIZE_ORDER)*PAGE_SIZE) - -#define KERNEL_STACK_SIZE IA64_STK_OFFSET - -#endif /* __KERNEL__ */ - -#ifndef __ASSEMBLY__ - -/* - * This struct defines the way the registers are saved on system - * calls. - * - * We don't save all floating point register because the kernel - * is compiled to use only a very small subset, so the other are - * untouched. - * - * THIS STRUCTURE MUST BE A MULTIPLE 16-BYTE IN SIZE - * (because the memory stack pointer MUST ALWAYS be aligned this way) - * - */ -struct pt_regs { - /* The following registers are saved by SAVE_MIN: */ - unsigned long b6; /* scratch */ - unsigned long b7; /* scratch */ - - unsigned long ar_csd; /* used by cmp8xchg16 (scratch) */ - unsigned long ar_ssd; /* reserved for future use (scratch) */ - - unsigned long r8; /* scratch (return value register 0) */ - unsigned long r9; /* scratch (return value register 1) */ - unsigned long r10; /* scratch (return value register 2) */ - unsigned long r11; /* scratch (return value register 3) */ - - unsigned long cr_ipsr; /* interrupted task's psr */ - unsigned long cr_iip; /* interrupted task's instruction pointer */ - /* - * interrupted task's function state; if bit 63 is cleared, it - * contains syscall's ar.pfs.pfm: - */ - unsigned long cr_ifs; - - unsigned long ar_unat; /* interrupted task's NaT register (preserved) */ - unsigned long ar_pfs; /* prev function state */ - unsigned long ar_rsc; /* RSE configuration */ - /* The following two are valid only if cr_ipsr.cpl > 0 || ti->flags & _TIF_MCA_INIT */ - unsigned long ar_rnat; /* RSE NaT */ - unsigned long ar_bspstore; /* RSE bspstore */ - - unsigned long pr; /* 64 predicate registers (1 bit each) */ - unsigned long b0; /* return pointer (bp) */ - unsigned long loadrs; /* size of dirty partition << 16 */ - - unsigned long r1; /* the gp pointer */ - unsigned long r12; /* interrupted task's memory stack pointer */ - unsigned long r13; /* thread pointer */ - - unsigned long ar_fpsr; /* floating point status (preserved) */ - unsigned long r15; /* scratch */ - - /* The remaining registers are NOT saved for system calls. */ - - unsigned long r14; /* scratch */ - unsigned long r2; /* scratch */ - unsigned long r3; /* scratch */ - - /* The following registers are saved by SAVE_REST: */ - unsigned long r16; /* scratch */ - unsigned long r17; /* scratch */ - unsigned long r18; /* scratch */ - unsigned long r19; /* scratch */ - unsigned long r20; /* scratch */ - unsigned long r21; /* scratch */ - unsigned long r22; /* scratch */ - unsigned long r23; /* scratch */ - unsigned long r24; /* scratch */ - unsigned long r25; /* scratch */ - unsigned long r26; /* scratch */ - unsigned long r27; /* scratch */ - unsigned long r28; /* scratch */ - unsigned long r29; /* scratch */ - unsigned long r30; /* scratch */ - unsigned long r31; /* scratch */ - - unsigned long ar_ccv; /* compare/exchange value (scratch) */ - - /* - * Floating point registers that the kernel considers scratch: - */ - struct ia64_fpreg f6; /* scratch */ - struct ia64_fpreg f7; /* scratch */ - struct ia64_fpreg f8; /* scratch */ - struct ia64_fpreg f9; /* scratch */ - struct ia64_fpreg f10; /* scratch */ - struct ia64_fpreg f11; /* scratch */ -}; - -/* - * This structure contains the addition registers that need to - * preserved across a context switch. This generally consists of - * "preserved" registers. - */ -struct switch_stack { - unsigned long caller_unat; /* user NaT collection register (preserved) */ - unsigned long ar_fpsr; /* floating-point status register */ - - struct ia64_fpreg f2; /* preserved */ - struct ia64_fpreg f3; /* preserved */ - struct ia64_fpreg f4; /* preserved */ - struct ia64_fpreg f5; /* preserved */ - - struct ia64_fpreg f12; /* scratch, but untouched by kernel */ - struct ia64_fpreg f13; /* scratch, but untouched by kernel */ - struct ia64_fpreg f14; /* scratch, but untouched by kernel */ - struct ia64_fpreg f15; /* scratch, but untouched by kernel */ - struct ia64_fpreg f16; /* preserved */ - struct ia64_fpreg f17; /* preserved */ - struct ia64_fpreg f18; /* preserved */ - struct ia64_fpreg f19; /* preserved */ - struct ia64_fpreg f20; /* preserved */ - struct ia64_fpreg f21; /* preserved */ - struct ia64_fpreg f22; /* preserved */ - struct ia64_fpreg f23; /* preserved */ - struct ia64_fpreg f24; /* preserved */ - struct ia64_fpreg f25; /* preserved */ - struct ia64_fpreg f26; /* preserved */ - struct ia64_fpreg f27; /* preserved */ - struct ia64_fpreg f28; /* preserved */ - struct ia64_fpreg f29; /* preserved */ - struct ia64_fpreg f30; /* preserved */ - struct ia64_fpreg f31; /* preserved */ - - unsigned long r4; /* preserved */ - unsigned long r5; /* preserved */ - unsigned long r6; /* preserved */ - unsigned long r7; /* preserved */ - - unsigned long b0; /* so we can force a direct return in copy_thread */ - unsigned long b1; - unsigned long b2; - unsigned long b3; - unsigned long b4; - unsigned long b5; - - unsigned long ar_pfs; /* previous function state */ - unsigned long ar_lc; /* loop counter (preserved) */ - unsigned long ar_unat; /* NaT bits for r4-r7 */ - unsigned long ar_rnat; /* RSE NaT collection register */ - unsigned long ar_bspstore; /* RSE dirty base (preserved) */ - unsigned long pr; /* 64 predicate registers (1 bit each) */ -}; - -#ifdef __KERNEL__ - -#include -#include - -/* - * We use the ia64_psr(regs)->ri to determine which of the three - * instructions in bundle (16 bytes) took the sample. Generate - * the canonical representation by adding to instruction pointer. - */ -# define instruction_pointer(regs) ((regs)->cr_iip + ia64_psr(regs)->ri) - -#define regs_return_value(regs) ((regs)->r8) - -/* Conserve space in histogram by encoding slot bits in address - * bits 2 and 3 rather than bits 0 and 1. - */ -#define profile_pc(regs) \ -({ \ - unsigned long __ip = instruction_pointer(regs); \ - (__ip & ~3UL) + ((__ip & 3UL) << 2); \ -}) - - /* given a pointer to a task_struct, return the user's pt_regs */ -# define task_pt_regs(t) (((struct pt_regs *) ((char *) (t) + IA64_STK_OFFSET)) - 1) -# define ia64_psr(regs) ((struct ia64_psr *) &(regs)->cr_ipsr) -# define user_mode(regs) (((struct ia64_psr *) &(regs)->cr_ipsr)->cpl != 0) -# define user_stack(task,regs) ((long) regs - (long) task == IA64_STK_OFFSET - sizeof(*regs)) -# define fsys_mode(task,regs) \ - ({ \ - struct task_struct *_task = (task); \ - struct pt_regs *_regs = (regs); \ - !user_mode(_regs) && user_stack(_task, _regs); \ - }) - - /* - * System call handlers that, upon successful completion, need to return a negative value - * should call force_successful_syscall_return() right before returning. On architectures - * where the syscall convention provides for a separate error flag (e.g., alpha, ia64, - * ppc{,64}, sparc{,64}, possibly others), this macro can be used to ensure that the error - * flag will not get set. On architectures which do not support a separate error flag, - * the macro is a no-op and the spurious error condition needs to be filtered out by some - * other means (e.g., in user-level, by passing an extra argument to the syscall handler, - * or something along those lines). - * - * On ia64, we can clear the user's pt_regs->r8 to force a successful syscall. - */ -# define force_successful_syscall_return() (task_pt_regs(current)->r8 = 0) - - struct task_struct; /* forward decl */ - struct unw_frame_info; /* forward decl */ - - extern void show_regs (struct pt_regs *); - extern void ia64_do_show_stack (struct unw_frame_info *, void *); - extern unsigned long ia64_get_user_rbs_end (struct task_struct *, struct pt_regs *, - unsigned long *); - extern long ia64_peek (struct task_struct *, struct switch_stack *, unsigned long, - unsigned long, long *); - extern long ia64_poke (struct task_struct *, struct switch_stack *, unsigned long, - unsigned long, long); - extern void ia64_flush_fph (struct task_struct *); - extern void ia64_sync_fph (struct task_struct *); - extern void ia64_sync_krbs(void); - extern long ia64_sync_user_rbs (struct task_struct *, struct switch_stack *, - unsigned long, unsigned long); - - /* get nat bits for scratch registers such that bit N==1 iff scratch register rN is a NaT */ - extern unsigned long ia64_get_scratch_nat_bits (struct pt_regs *pt, unsigned long scratch_unat); - /* put nat bits for scratch registers such that scratch register rN is a NaT iff bit N==1 */ - extern unsigned long ia64_put_scratch_nat_bits (struct pt_regs *pt, unsigned long nat); - - extern void ia64_increment_ip (struct pt_regs *pt); - extern void ia64_decrement_ip (struct pt_regs *pt); - - extern void ia64_ptrace_stop(void); - #define arch_ptrace_stop(code, info) \ - ia64_ptrace_stop() - #define arch_ptrace_stop_needed(code, info) \ - (!test_thread_flag(TIF_RESTORE_RSE)) - - extern void ptrace_attach_sync_user_rbs (struct task_struct *); - #define arch_ptrace_attach(child) \ - ptrace_attach_sync_user_rbs(child) - - #define arch_has_single_step() (1) - extern void user_enable_single_step(struct task_struct *); - extern void user_disable_single_step(struct task_struct *); - - #define arch_has_block_step() (1) - extern void user_enable_block_step(struct task_struct *); - -#endif /* !__KERNEL__ */ - -/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */ -struct pt_all_user_regs { - unsigned long nat; - unsigned long cr_iip; - unsigned long cfm; - unsigned long cr_ipsr; - unsigned long pr; - - unsigned long gr[32]; - unsigned long br[8]; - unsigned long ar[128]; - struct ia64_fpreg fr[128]; -}; - -#endif /* !__ASSEMBLY__ */ - -/* indices to application-registers array in pt_all_user_regs */ -#define PT_AUR_RSC 16 -#define PT_AUR_BSP 17 -#define PT_AUR_BSPSTORE 18 -#define PT_AUR_RNAT 19 -#define PT_AUR_CCV 32 -#define PT_AUR_UNAT 36 -#define PT_AUR_FPSR 40 -#define PT_AUR_PFS 64 -#define PT_AUR_LC 65 -#define PT_AUR_EC 66 - -/* - * The numbers chosen here are somewhat arbitrary but absolutely MUST - * not overlap with any of the number assigned in . - */ -#define PTRACE_SINGLEBLOCK 12 /* resume execution until next branch */ -#define PTRACE_OLD_GETSIGINFO 13 /* (replaced by PTRACE_GETSIGINFO in ) */ -#define PTRACE_OLD_SETSIGINFO 14 /* (replaced by PTRACE_SETSIGINFO in ) */ -#define PTRACE_GETREGS 18 /* get all registers (pt_all_user_regs) in one shot */ -#define PTRACE_SETREGS 19 /* set all registers (pt_all_user_regs) in one shot */ - -#define PTRACE_OLDSETOPTIONS 21 - -#endif /* _ASM_IA64_PTRACE_H */ diff --git a/include/asm-ia64/ptrace_offsets.h b/include/asm-ia64/ptrace_offsets.h deleted file mode 100644 index b712773c759e..000000000000 --- a/include/asm-ia64/ptrace_offsets.h +++ /dev/null @@ -1,268 +0,0 @@ -#ifndef _ASM_IA64_PTRACE_OFFSETS_H -#define _ASM_IA64_PTRACE_OFFSETS_H - -/* - * Copyright (C) 1999, 2003 Hewlett-Packard Co - * David Mosberger-Tang - */ -/* - * The "uarea" that can be accessed via PEEKUSER and POKEUSER is a - * virtual structure that would have the following definition: - * - * struct uarea { - * struct ia64_fpreg fph[96]; // f32-f127 - * unsigned long nat_bits; - * unsigned long empty1; - * struct ia64_fpreg f2; // f2-f5 - * : - * struct ia64_fpreg f5; - * struct ia64_fpreg f10; // f10-f31 - * : - * struct ia64_fpreg f31; - * unsigned long r4; // r4-r7 - * : - * unsigned long r7; - * unsigned long b1; // b1-b5 - * : - * unsigned long b5; - * unsigned long ar_ec; - * unsigned long ar_lc; - * unsigned long empty2[5]; - * unsigned long cr_ipsr; - * unsigned long cr_iip; - * unsigned long cfm; - * unsigned long ar_unat; - * unsigned long ar_pfs; - * unsigned long ar_rsc; - * unsigned long ar_rnat; - * unsigned long ar_bspstore; - * unsigned long pr; - * unsigned long b6; - * unsigned long ar_bsp; - * unsigned long r1; - * unsigned long r2; - * unsigned long r3; - * unsigned long r12; - * unsigned long r13; - * unsigned long r14; - * unsigned long r15; - * unsigned long r8; - * unsigned long r9; - * unsigned long r10; - * unsigned long r11; - * unsigned long r16; - * : - * unsigned long r31; - * unsigned long ar_ccv; - * unsigned long ar_fpsr; - * unsigned long b0; - * unsigned long b7; - * unsigned long f6; - * unsigned long f7; - * unsigned long f8; - * unsigned long f9; - * unsigned long ar_csd; - * unsigned long ar_ssd; - * unsigned long rsvd1[710]; - * unsigned long dbr[8]; - * unsigned long rsvd2[504]; - * unsigned long ibr[8]; - * unsigned long rsvd3[504]; - * unsigned long pmd[4]; - * } - */ - -/* fph: */ -#define PT_F32 0x0000 -#define PT_F33 0x0010 -#define PT_F34 0x0020 -#define PT_F35 0x0030 -#define PT_F36 0x0040 -#define PT_F37 0x0050 -#define PT_F38 0x0060 -#define PT_F39 0x0070 -#define PT_F40 0x0080 -#define PT_F41 0x0090 -#define PT_F42 0x00a0 -#define PT_F43 0x00b0 -#define PT_F44 0x00c0 -#define PT_F45 0x00d0 -#define PT_F46 0x00e0 -#define PT_F47 0x00f0 -#define PT_F48 0x0100 -#define PT_F49 0x0110 -#define PT_F50 0x0120 -#define PT_F51 0x0130 -#define PT_F52 0x0140 -#define PT_F53 0x0150 -#define PT_F54 0x0160 -#define PT_F55 0x0170 -#define PT_F56 0x0180 -#define PT_F57 0x0190 -#define PT_F58 0x01a0 -#define PT_F59 0x01b0 -#define PT_F60 0x01c0 -#define PT_F61 0x01d0 -#define PT_F62 0x01e0 -#define PT_F63 0x01f0 -#define PT_F64 0x0200 -#define PT_F65 0x0210 -#define PT_F66 0x0220 -#define PT_F67 0x0230 -#define PT_F68 0x0240 -#define PT_F69 0x0250 -#define PT_F70 0x0260 -#define PT_F71 0x0270 -#define PT_F72 0x0280 -#define PT_F73 0x0290 -#define PT_F74 0x02a0 -#define PT_F75 0x02b0 -#define PT_F76 0x02c0 -#define PT_F77 0x02d0 -#define PT_F78 0x02e0 -#define PT_F79 0x02f0 -#define PT_F80 0x0300 -#define PT_F81 0x0310 -#define PT_F82 0x0320 -#define PT_F83 0x0330 -#define PT_F84 0x0340 -#define PT_F85 0x0350 -#define PT_F86 0x0360 -#define PT_F87 0x0370 -#define PT_F88 0x0380 -#define PT_F89 0x0390 -#define PT_F90 0x03a0 -#define PT_F91 0x03b0 -#define PT_F92 0x03c0 -#define PT_F93 0x03d0 -#define PT_F94 0x03e0 -#define PT_F95 0x03f0 -#define PT_F96 0x0400 -#define PT_F97 0x0410 -#define PT_F98 0x0420 -#define PT_F99 0x0430 -#define PT_F100 0x0440 -#define PT_F101 0x0450 -#define PT_F102 0x0460 -#define PT_F103 0x0470 -#define PT_F104 0x0480 -#define PT_F105 0x0490 -#define PT_F106 0x04a0 -#define PT_F107 0x04b0 -#define PT_F108 0x04c0 -#define PT_F109 0x04d0 -#define PT_F110 0x04e0 -#define PT_F111 0x04f0 -#define PT_F112 0x0500 -#define PT_F113 0x0510 -#define PT_F114 0x0520 -#define PT_F115 0x0530 -#define PT_F116 0x0540 -#define PT_F117 0x0550 -#define PT_F118 0x0560 -#define PT_F119 0x0570 -#define PT_F120 0x0580 -#define PT_F121 0x0590 -#define PT_F122 0x05a0 -#define PT_F123 0x05b0 -#define PT_F124 0x05c0 -#define PT_F125 0x05d0 -#define PT_F126 0x05e0 -#define PT_F127 0x05f0 - -#define PT_NAT_BITS 0x0600 - -#define PT_F2 0x0610 -#define PT_F3 0x0620 -#define PT_F4 0x0630 -#define PT_F5 0x0640 -#define PT_F10 0x0650 -#define PT_F11 0x0660 -#define PT_F12 0x0670 -#define PT_F13 0x0680 -#define PT_F14 0x0690 -#define PT_F15 0x06a0 -#define PT_F16 0x06b0 -#define PT_F17 0x06c0 -#define PT_F18 0x06d0 -#define PT_F19 0x06e0 -#define PT_F20 0x06f0 -#define PT_F21 0x0700 -#define PT_F22 0x0710 -#define PT_F23 0x0720 -#define PT_F24 0x0730 -#define PT_F25 0x0740 -#define PT_F26 0x0750 -#define PT_F27 0x0760 -#define PT_F28 0x0770 -#define PT_F29 0x0780 -#define PT_F30 0x0790 -#define PT_F31 0x07a0 -#define PT_R4 0x07b0 -#define PT_R5 0x07b8 -#define PT_R6 0x07c0 -#define PT_R7 0x07c8 - -#define PT_B1 0x07d8 -#define PT_B2 0x07e0 -#define PT_B3 0x07e8 -#define PT_B4 0x07f0 -#define PT_B5 0x07f8 - -#define PT_AR_EC 0x0800 -#define PT_AR_LC 0x0808 - -#define PT_CR_IPSR 0x0830 -#define PT_CR_IIP 0x0838 -#define PT_CFM 0x0840 -#define PT_AR_UNAT 0x0848 -#define PT_AR_PFS 0x0850 -#define PT_AR_RSC 0x0858 -#define PT_AR_RNAT 0x0860 -#define PT_AR_BSPSTORE 0x0868 -#define PT_PR 0x0870 -#define PT_B6 0x0878 -#define PT_AR_BSP 0x0880 /* note: this points to the *end* of the backing store! */ -#define PT_R1 0x0888 -#define PT_R2 0x0890 -#define PT_R3 0x0898 -#define PT_R12 0x08a0 -#define PT_R13 0x08a8 -#define PT_R14 0x08b0 -#define PT_R15 0x08b8 -#define PT_R8 0x08c0 -#define PT_R9 0x08c8 -#define PT_R10 0x08d0 -#define PT_R11 0x08d8 -#define PT_R16 0x08e0 -#define PT_R17 0x08e8 -#define PT_R18 0x08f0 -#define PT_R19 0x08f8 -#define PT_R20 0x0900 -#define PT_R21 0x0908 -#define PT_R22 0x0910 -#define PT_R23 0x0918 -#define PT_R24 0x0920 -#define PT_R25 0x0928 -#define PT_R26 0x0930 -#define PT_R27 0x0938 -#define PT_R28 0x0940 -#define PT_R29 0x0948 -#define PT_R30 0x0950 -#define PT_R31 0x0958 -#define PT_AR_CCV 0x0960 -#define PT_AR_FPSR 0x0968 -#define PT_B0 0x0970 -#define PT_B7 0x0978 -#define PT_F6 0x0980 -#define PT_F7 0x0990 -#define PT_F8 0x09a0 -#define PT_F9 0x09b0 -#define PT_AR_CSD 0x09c0 -#define PT_AR_SSD 0x09c8 - -#define PT_DBR 0x2000 /* data breakpoint registers */ -#define PT_IBR 0x3000 /* instruction breakpoint registers */ -#define PT_PMD 0x4000 /* performance monitoring counters */ - -#endif /* _ASM_IA64_PTRACE_OFFSETS_H */ diff --git a/include/asm-ia64/resource.h b/include/asm-ia64/resource.h deleted file mode 100644 index ba2272a87fc7..000000000000 --- a/include/asm-ia64/resource.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _ASM_IA64_RESOURCE_H -#define _ASM_IA64_RESOURCE_H - -#include -#include - -#endif /* _ASM_IA64_RESOURCE_H */ diff --git a/include/asm-ia64/rse.h b/include/asm-ia64/rse.h deleted file mode 100644 index 02830a3b0196..000000000000 --- a/include/asm-ia64/rse.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef _ASM_IA64_RSE_H -#define _ASM_IA64_RSE_H - -/* - * Copyright (C) 1998, 1999 Hewlett-Packard Co - * Copyright (C) 1998, 1999 David Mosberger-Tang - * - * Register stack engine related helper functions. This file may be - * used in applications, so be careful about the name-space and give - * some consideration to non-GNU C compilers (though __inline__ is - * fine). - */ - -static __inline__ unsigned long -ia64_rse_slot_num (unsigned long *addr) -{ - return (((unsigned long) addr) >> 3) & 0x3f; -} - -/* - * Return TRUE if ADDR is the address of an RNAT slot. - */ -static __inline__ unsigned long -ia64_rse_is_rnat_slot (unsigned long *addr) -{ - return ia64_rse_slot_num(addr) == 0x3f; -} - -/* - * Returns the address of the RNAT slot that covers the slot at - * address SLOT_ADDR. - */ -static __inline__ unsigned long * -ia64_rse_rnat_addr (unsigned long *slot_addr) -{ - return (unsigned long *) ((unsigned long) slot_addr | (0x3f << 3)); -} - -/* - * Calculate the number of registers in the dirty partition starting at BSPSTORE and - * ending at BSP. This isn't simply (BSP-BSPSTORE)/8 because every 64th slot stores - * ar.rnat. - */ -static __inline__ unsigned long -ia64_rse_num_regs (unsigned long *bspstore, unsigned long *bsp) -{ - unsigned long slots = (bsp - bspstore); - - return slots - (ia64_rse_slot_num(bspstore) + slots)/0x40; -} - -/* - * The inverse of the above: given bspstore and the number of - * registers, calculate ar.bsp. - */ -static __inline__ unsigned long * -ia64_rse_skip_regs (unsigned long *addr, long num_regs) -{ - long delta = ia64_rse_slot_num(addr) + num_regs; - - if (num_regs < 0) - delta -= 0x3e; - return addr + num_regs + delta/0x3f; -} - -#endif /* _ASM_IA64_RSE_H */ diff --git a/include/asm-ia64/rwsem.h b/include/asm-ia64/rwsem.h deleted file mode 100644 index 8aba06a7b038..000000000000 --- a/include/asm-ia64/rwsem.h +++ /dev/null @@ -1,182 +0,0 @@ -/* - * asm-ia64/rwsem.h: R/W semaphores for ia64 - * - * Copyright (C) 2003 Ken Chen - * Copyright (C) 2003 Asit Mallick - * Copyright (C) 2005 Christoph Lameter - * - * Based on asm-i386/rwsem.h and other architecture implementation. - * - * The MSW of the count is the negated number of active writers and - * waiting lockers, and the LSW is the total number of active locks. - * - * The lock count is initialized to 0 (no active and no waiting lockers). - * - * When a writer subtracts WRITE_BIAS, it'll get 0xffffffff00000001 for - * the case of an uncontended lock. Readers increment by 1 and see a positive - * value when uncontended, negative if there are writers (and maybe) readers - * waiting (in which case it goes to sleep). - */ - -#ifndef _ASM_IA64_RWSEM_H -#define _ASM_IA64_RWSEM_H - -#ifndef _LINUX_RWSEM_H -#error "Please don't include directly, use instead." -#endif - -#include -#include - -#include - -/* - * the semaphore definition - */ -struct rw_semaphore { - signed long count; - spinlock_t wait_lock; - struct list_head wait_list; -}; - -#define RWSEM_UNLOCKED_VALUE __IA64_UL_CONST(0x0000000000000000) -#define RWSEM_ACTIVE_BIAS __IA64_UL_CONST(0x0000000000000001) -#define RWSEM_ACTIVE_MASK __IA64_UL_CONST(0x00000000ffffffff) -#define RWSEM_WAITING_BIAS -__IA64_UL_CONST(0x0000000100000000) -#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS -#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) - -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ - LIST_HEAD_INIT((name).wait_list) } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); - -static inline void -init_rwsem (struct rw_semaphore *sem) -{ - sem->count = RWSEM_UNLOCKED_VALUE; - spin_lock_init(&sem->wait_lock); - INIT_LIST_HEAD(&sem->wait_list); -} - -/* - * lock for reading - */ -static inline void -__down_read (struct rw_semaphore *sem) -{ - long result = ia64_fetchadd8_acq((unsigned long *)&sem->count, 1); - - if (result < 0) - rwsem_down_read_failed(sem); -} - -/* - * lock for writing - */ -static inline void -__down_write (struct rw_semaphore *sem) -{ - long old, new; - - do { - old = sem->count; - new = old + RWSEM_ACTIVE_WRITE_BIAS; - } while (cmpxchg_acq(&sem->count, old, new) != old); - - if (old != 0) - rwsem_down_write_failed(sem); -} - -/* - * unlock after reading - */ -static inline void -__up_read (struct rw_semaphore *sem) -{ - long result = ia64_fetchadd8_rel((unsigned long *)&sem->count, -1); - - if (result < 0 && (--result & RWSEM_ACTIVE_MASK) == 0) - rwsem_wake(sem); -} - -/* - * unlock after writing - */ -static inline void -__up_write (struct rw_semaphore *sem) -{ - long old, new; - - do { - old = sem->count; - new = old - RWSEM_ACTIVE_WRITE_BIAS; - } while (cmpxchg_rel(&sem->count, old, new) != old); - - if (new < 0 && (new & RWSEM_ACTIVE_MASK) == 0) - rwsem_wake(sem); -} - -/* - * trylock for reading -- returns 1 if successful, 0 if contention - */ -static inline int -__down_read_trylock (struct rw_semaphore *sem) -{ - long tmp; - while ((tmp = sem->count) >= 0) { - if (tmp == cmpxchg_acq(&sem->count, tmp, tmp+1)) { - return 1; - } - } - return 0; -} - -/* - * trylock for writing -- returns 1 if successful, 0 if contention - */ -static inline int -__down_write_trylock (struct rw_semaphore *sem) -{ - long tmp = cmpxchg_acq(&sem->count, RWSEM_UNLOCKED_VALUE, - RWSEM_ACTIVE_WRITE_BIAS); - return tmp == RWSEM_UNLOCKED_VALUE; -} - -/* - * downgrade write lock to read lock - */ -static inline void -__downgrade_write (struct rw_semaphore *sem) -{ - long old, new; - - do { - old = sem->count; - new = old - RWSEM_WAITING_BIAS; - } while (cmpxchg_rel(&sem->count, old, new) != old); - - if (old < 0) - rwsem_downgrade_wake(sem); -} - -/* - * Implement atomic add functionality. These used to be "inline" functions, but GCC v3.1 - * doesn't quite optimize this stuff right and ends up with bad calls to fetchandadd. - */ -#define rwsem_atomic_add(delta, sem) atomic64_add(delta, (atomic64_t *)(&(sem)->count)) -#define rwsem_atomic_update(delta, sem) atomic64_add_return(delta, (atomic64_t *)(&(sem)->count)) - -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - -#endif /* _ASM_IA64_RWSEM_H */ diff --git a/include/asm-ia64/sal.h b/include/asm-ia64/sal.h deleted file mode 100644 index 89594b442f83..000000000000 --- a/include/asm-ia64/sal.h +++ /dev/null @@ -1,905 +0,0 @@ -#ifndef _ASM_IA64_SAL_H -#define _ASM_IA64_SAL_H - -/* - * System Abstraction Layer definitions. - * - * This is based on version 2.5 of the manual "IA-64 System - * Abstraction Layer". - * - * Copyright (C) 2001 Intel - * Copyright (C) 2002 Jenna Hall - * Copyright (C) 2001 Fred Lewis - * Copyright (C) 1998, 1999, 2001, 2003 Hewlett-Packard Co - * David Mosberger-Tang - * Copyright (C) 1999 Srinivasa Prasad Thirumalachar - * - * 02/01/04 J. Hall Updated Error Record Structures to conform to July 2001 - * revision of the SAL spec. - * 01/01/03 fvlewis Updated Error Record Structures to conform with Nov. 2000 - * revision of the SAL spec. - * 99/09/29 davidm Updated for SAL 2.6. - * 00/03/29 cfleck Updated SAL Error Logging info for processor (SAL 2.6) - * (plus examples of platform error info structures from smariset @ Intel) - */ - -#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK_BIT 0 -#define IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT_BIT 1 -#define IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT_BIT 2 -#define IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT 3 - -#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK (1< -#include -#include - -#include -#include -#include - -extern spinlock_t sal_lock; - -/* SAL spec _requires_ eight args for each call. */ -#define __IA64_FW_CALL(entry,result,a0,a1,a2,a3,a4,a5,a6,a7) \ - result = (*entry)(a0,a1,a2,a3,a4,a5,a6,a7) - -# define IA64_FW_CALL(entry,result,args...) do { \ - unsigned long __ia64_sc_flags; \ - struct ia64_fpreg __ia64_sc_fr[6]; \ - ia64_save_scratch_fpregs(__ia64_sc_fr); \ - spin_lock_irqsave(&sal_lock, __ia64_sc_flags); \ - __IA64_FW_CALL(entry, result, args); \ - spin_unlock_irqrestore(&sal_lock, __ia64_sc_flags); \ - ia64_load_scratch_fpregs(__ia64_sc_fr); \ -} while (0) - -# define SAL_CALL(result,args...) \ - IA64_FW_CALL(ia64_sal, result, args); - -# define SAL_CALL_NOLOCK(result,args...) do { \ - unsigned long __ia64_scn_flags; \ - struct ia64_fpreg __ia64_scn_fr[6]; \ - ia64_save_scratch_fpregs(__ia64_scn_fr); \ - local_irq_save(__ia64_scn_flags); \ - __IA64_FW_CALL(ia64_sal, result, args); \ - local_irq_restore(__ia64_scn_flags); \ - ia64_load_scratch_fpregs(__ia64_scn_fr); \ -} while (0) - -# define SAL_CALL_REENTRANT(result,args...) do { \ - struct ia64_fpreg __ia64_scs_fr[6]; \ - ia64_save_scratch_fpregs(__ia64_scs_fr); \ - preempt_disable(); \ - __IA64_FW_CALL(ia64_sal, result, args); \ - preempt_enable(); \ - ia64_load_scratch_fpregs(__ia64_scs_fr); \ -} while (0) - -#define SAL_SET_VECTORS 0x01000000 -#define SAL_GET_STATE_INFO 0x01000001 -#define SAL_GET_STATE_INFO_SIZE 0x01000002 -#define SAL_CLEAR_STATE_INFO 0x01000003 -#define SAL_MC_RENDEZ 0x01000004 -#define SAL_MC_SET_PARAMS 0x01000005 -#define SAL_REGISTER_PHYSICAL_ADDR 0x01000006 - -#define SAL_CACHE_FLUSH 0x01000008 -#define SAL_CACHE_INIT 0x01000009 -#define SAL_PCI_CONFIG_READ 0x01000010 -#define SAL_PCI_CONFIG_WRITE 0x01000011 -#define SAL_FREQ_BASE 0x01000012 -#define SAL_PHYSICAL_ID_INFO 0x01000013 - -#define SAL_UPDATE_PAL 0x01000020 - -struct ia64_sal_retval { - /* - * A zero status value indicates call completed without error. - * A negative status value indicates reason of call failure. - * A positive status value indicates success but an - * informational value should be printed (e.g., "reboot for - * change to take effect"). - */ - s64 status; - u64 v0; - u64 v1; - u64 v2; -}; - -typedef struct ia64_sal_retval (*ia64_sal_handler) (u64, ...); - -enum { - SAL_FREQ_BASE_PLATFORM = 0, - SAL_FREQ_BASE_INTERVAL_TIMER = 1, - SAL_FREQ_BASE_REALTIME_CLOCK = 2 -}; - -/* - * The SAL system table is followed by a variable number of variable - * length descriptors. The structure of these descriptors follows - * below. - * The defininition follows SAL specs from July 2000 - */ -struct ia64_sal_systab { - u8 signature[4]; /* should be "SST_" */ - u32 size; /* size of this table in bytes */ - u8 sal_rev_minor; - u8 sal_rev_major; - u16 entry_count; /* # of entries in variable portion */ - u8 checksum; - u8 reserved1[7]; - u8 sal_a_rev_minor; - u8 sal_a_rev_major; - u8 sal_b_rev_minor; - u8 sal_b_rev_major; - /* oem_id & product_id: terminating NUL is missing if string is exactly 32 bytes long. */ - u8 oem_id[32]; - u8 product_id[32]; /* ASCII product id */ - u8 reserved2[8]; -}; - -enum sal_systab_entry_type { - SAL_DESC_ENTRY_POINT = 0, - SAL_DESC_MEMORY = 1, - SAL_DESC_PLATFORM_FEATURE = 2, - SAL_DESC_TR = 3, - SAL_DESC_PTC = 4, - SAL_DESC_AP_WAKEUP = 5 -}; - -/* - * Entry type: Size: - * 0 48 - * 1 32 - * 2 16 - * 3 32 - * 4 16 - * 5 16 - */ -#define SAL_DESC_SIZE(type) "\060\040\020\040\020\020"[(unsigned) type] - -typedef struct ia64_sal_desc_entry_point { - u8 type; - u8 reserved1[7]; - u64 pal_proc; - u64 sal_proc; - u64 gp; - u8 reserved2[16]; -}ia64_sal_desc_entry_point_t; - -typedef struct ia64_sal_desc_memory { - u8 type; - u8 used_by_sal; /* needs to be mapped for SAL? */ - u8 mem_attr; /* current memory attribute setting */ - u8 access_rights; /* access rights set up by SAL */ - u8 mem_attr_mask; /* mask of supported memory attributes */ - u8 reserved1; - u8 mem_type; /* memory type */ - u8 mem_usage; /* memory usage */ - u64 addr; /* physical address of memory */ - u32 length; /* length (multiple of 4KB pages) */ - u32 reserved2; - u8 oem_reserved[8]; -} ia64_sal_desc_memory_t; - -typedef struct ia64_sal_desc_platform_feature { - u8 type; - u8 feature_mask; - u8 reserved1[14]; -} ia64_sal_desc_platform_feature_t; - -typedef struct ia64_sal_desc_tr { - u8 type; - u8 tr_type; /* 0 == instruction, 1 == data */ - u8 regnum; /* translation register number */ - u8 reserved1[5]; - u64 addr; /* virtual address of area covered */ - u64 page_size; /* encoded page size */ - u8 reserved2[8]; -} ia64_sal_desc_tr_t; - -typedef struct ia64_sal_desc_ptc { - u8 type; - u8 reserved1[3]; - u32 num_domains; /* # of coherence domains */ - u64 domain_info; /* physical address of domain info table */ -} ia64_sal_desc_ptc_t; - -typedef struct ia64_sal_ptc_domain_info { - u64 proc_count; /* number of processors in domain */ - u64 proc_list; /* physical address of LID array */ -} ia64_sal_ptc_domain_info_t; - -typedef struct ia64_sal_ptc_domain_proc_entry { - u64 id : 8; /* id of processor */ - u64 eid : 8; /* eid of processor */ -} ia64_sal_ptc_domain_proc_entry_t; - - -#define IA64_SAL_AP_EXTERNAL_INT 0 - -typedef struct ia64_sal_desc_ap_wakeup { - u8 type; - u8 mechanism; /* 0 == external interrupt */ - u8 reserved1[6]; - u64 vector; /* interrupt vector in range 0x10-0xff */ -} ia64_sal_desc_ap_wakeup_t ; - -extern ia64_sal_handler ia64_sal; -extern struct ia64_sal_desc_ptc *ia64_ptc_domain_info; - -extern unsigned short sal_revision; /* supported SAL spec revision */ -extern unsigned short sal_version; /* SAL version; OEM dependent */ -#define SAL_VERSION_CODE(major, minor) ((BIN2BCD(major) << 8) | BIN2BCD(minor)) - -extern const char *ia64_sal_strerror (long status); -extern void ia64_sal_init (struct ia64_sal_systab *sal_systab); - -/* SAL information type encodings */ -enum { - SAL_INFO_TYPE_MCA = 0, /* Machine check abort information */ - SAL_INFO_TYPE_INIT = 1, /* Init information */ - SAL_INFO_TYPE_CMC = 2, /* Corrected machine check information */ - SAL_INFO_TYPE_CPE = 3 /* Corrected platform error information */ -}; - -/* Encodings for machine check parameter types */ -enum { - SAL_MC_PARAM_RENDEZ_INT = 1, /* Rendezvous interrupt */ - SAL_MC_PARAM_RENDEZ_WAKEUP = 2, /* Wakeup */ - SAL_MC_PARAM_CPE_INT = 3 /* Corrected Platform Error Int */ -}; - -/* Encodings for rendezvous mechanisms */ -enum { - SAL_MC_PARAM_MECHANISM_INT = 1, /* Use interrupt */ - SAL_MC_PARAM_MECHANISM_MEM = 2 /* Use memory synchronization variable*/ -}; - -/* Encodings for vectors which can be registered by the OS with SAL */ -enum { - SAL_VECTOR_OS_MCA = 0, - SAL_VECTOR_OS_INIT = 1, - SAL_VECTOR_OS_BOOT_RENDEZ = 2 -}; - -/* Encodings for mca_opt parameter sent to SAL_MC_SET_PARAMS */ -#define SAL_MC_PARAM_RZ_ALWAYS 0x1 -#define SAL_MC_PARAM_BINIT_ESCALATE 0x10 - -/* - * Definition of the SAL Error Log from the SAL spec - */ - -/* SAL Error Record Section GUID Definitions */ -#define SAL_PROC_DEV_ERR_SECT_GUID \ - EFI_GUID(0xe429faf1, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) -#define SAL_PLAT_MEM_DEV_ERR_SECT_GUID \ - EFI_GUID(0xe429faf2, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) -#define SAL_PLAT_SEL_DEV_ERR_SECT_GUID \ - EFI_GUID(0xe429faf3, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) -#define SAL_PLAT_PCI_BUS_ERR_SECT_GUID \ - EFI_GUID(0xe429faf4, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) -#define SAL_PLAT_SMBIOS_DEV_ERR_SECT_GUID \ - EFI_GUID(0xe429faf5, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) -#define SAL_PLAT_PCI_COMP_ERR_SECT_GUID \ - EFI_GUID(0xe429faf6, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) -#define SAL_PLAT_SPECIFIC_ERR_SECT_GUID \ - EFI_GUID(0xe429faf7, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) -#define SAL_PLAT_HOST_CTLR_ERR_SECT_GUID \ - EFI_GUID(0xe429faf8, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) -#define SAL_PLAT_BUS_ERR_SECT_GUID \ - EFI_GUID(0xe429faf9, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81) -#define PROCESSOR_ABSTRACTION_LAYER_OVERWRITE_GUID \ - EFI_GUID(0x6cb0a200, 0x893a, 0x11da, 0x96, 0xd2, 0x0, 0x10, 0x83, 0xff, \ - 0xca, 0x4d) - -#define MAX_CACHE_ERRORS 6 -#define MAX_TLB_ERRORS 6 -#define MAX_BUS_ERRORS 1 - -/* Definition of version according to SAL spec for logging purposes */ -typedef struct sal_log_revision { - u8 minor; /* BCD (0..99) */ - u8 major; /* BCD (0..99) */ -} sal_log_revision_t; - -/* Definition of timestamp according to SAL spec for logging purposes */ -typedef struct sal_log_timestamp { - u8 slh_second; /* Second (0..59) */ - u8 slh_minute; /* Minute (0..59) */ - u8 slh_hour; /* Hour (0..23) */ - u8 slh_reserved; - u8 slh_day; /* Day (1..31) */ - u8 slh_month; /* Month (1..12) */ - u8 slh_year; /* Year (00..99) */ - u8 slh_century; /* Century (19, 20, 21, ...) */ -} sal_log_timestamp_t; - -/* Definition of log record header structures */ -typedef struct sal_log_record_header { - u64 id; /* Unique monotonically increasing ID */ - sal_log_revision_t revision; /* Major and Minor revision of header */ - u8 severity; /* Error Severity */ - u8 validation_bits; /* 0: platform_guid, 1: !timestamp */ - u32 len; /* Length of this error log in bytes */ - sal_log_timestamp_t timestamp; /* Timestamp */ - efi_guid_t platform_guid; /* Unique OEM Platform ID */ -} sal_log_record_header_t; - -#define sal_log_severity_recoverable 0 -#define sal_log_severity_fatal 1 -#define sal_log_severity_corrected 2 - -/* Definition of log section header structures */ -typedef struct sal_log_sec_header { - efi_guid_t guid; /* Unique Section ID */ - sal_log_revision_t revision; /* Major and Minor revision of Section */ - u16 reserved; - u32 len; /* Section length */ -} sal_log_section_hdr_t; - -typedef struct sal_log_mod_error_info { - struct { - u64 check_info : 1, - requestor_identifier : 1, - responder_identifier : 1, - target_identifier : 1, - precise_ip : 1, - reserved : 59; - } valid; - u64 check_info; - u64 requestor_identifier; - u64 responder_identifier; - u64 target_identifier; - u64 precise_ip; -} sal_log_mod_error_info_t; - -typedef struct sal_processor_static_info { - struct { - u64 minstate : 1, - br : 1, - cr : 1, - ar : 1, - rr : 1, - fr : 1, - reserved : 58; - } valid; - pal_min_state_area_t min_state_area; - u64 br[8]; - u64 cr[128]; - u64 ar[128]; - u64 rr[8]; - struct ia64_fpreg __attribute__ ((packed)) fr[128]; -} sal_processor_static_info_t; - -struct sal_cpuid_info { - u64 regs[5]; - u64 reserved; -}; - -typedef struct sal_log_processor_info { - sal_log_section_hdr_t header; - struct { - u64 proc_error_map : 1, - proc_state_param : 1, - proc_cr_lid : 1, - psi_static_struct : 1, - num_cache_check : 4, - num_tlb_check : 4, - num_bus_check : 4, - num_reg_file_check : 4, - num_ms_check : 4, - cpuid_info : 1, - reserved1 : 39; - } valid; - u64 proc_error_map; - u64 proc_state_parameter; - u64 proc_cr_lid; - /* - * The rest of this structure consists of variable-length arrays, which can't be - * expressed in C. - */ - sal_log_mod_error_info_t info[0]; - /* - * This is what the rest looked like if C supported variable-length arrays: - * - * sal_log_mod_error_info_t cache_check_info[.valid.num_cache_check]; - * sal_log_mod_error_info_t tlb_check_info[.valid.num_tlb_check]; - * sal_log_mod_error_info_t bus_check_info[.valid.num_bus_check]; - * sal_log_mod_error_info_t reg_file_check_info[.valid.num_reg_file_check]; - * sal_log_mod_error_info_t ms_check_info[.valid.num_ms_check]; - * struct sal_cpuid_info cpuid_info; - * sal_processor_static_info_t processor_static_info; - */ -} sal_log_processor_info_t; - -/* Given a sal_log_processor_info_t pointer, return a pointer to the processor_static_info: */ -#define SAL_LPI_PSI_INFO(l) \ -({ sal_log_processor_info_t *_l = (l); \ - ((sal_processor_static_info_t *) \ - ((char *) _l->info + ((_l->valid.num_cache_check + _l->valid.num_tlb_check \ - + _l->valid.num_bus_check + _l->valid.num_reg_file_check \ - + _l->valid.num_ms_check) * sizeof(sal_log_mod_error_info_t) \ - + sizeof(struct sal_cpuid_info)))); \ -}) - -/* platform error log structures */ - -typedef struct sal_log_mem_dev_err_info { - sal_log_section_hdr_t header; - struct { - u64 error_status : 1, - physical_addr : 1, - addr_mask : 1, - node : 1, - card : 1, - module : 1, - bank : 1, - device : 1, - row : 1, - column : 1, - bit_position : 1, - requestor_id : 1, - responder_id : 1, - target_id : 1, - bus_spec_data : 1, - oem_id : 1, - oem_data : 1, - reserved : 47; - } valid; - u64 error_status; - u64 physical_addr; - u64 addr_mask; - u16 node; - u16 card; - u16 module; - u16 bank; - u16 device; - u16 row; - u16 column; - u16 bit_position; - u64 requestor_id; - u64 responder_id; - u64 target_id; - u64 bus_spec_data; - u8 oem_id[16]; - u8 oem_data[1]; /* Variable length data */ -} sal_log_mem_dev_err_info_t; - -typedef struct sal_log_sel_dev_err_info { - sal_log_section_hdr_t header; - struct { - u64 record_id : 1, - record_type : 1, - generator_id : 1, - evm_rev : 1, - sensor_type : 1, - sensor_num : 1, - event_dir : 1, - event_data1 : 1, - event_data2 : 1, - event_data3 : 1, - reserved : 54; - } valid; - u16 record_id; - u8 record_type; - u8 timestamp[4]; - u16 generator_id; - u8 evm_rev; - u8 sensor_type; - u8 sensor_num; - u8 event_dir; - u8 event_data1; - u8 event_data2; - u8 event_data3; -} sal_log_sel_dev_err_info_t; - -typedef struct sal_log_pci_bus_err_info { - sal_log_section_hdr_t header; - struct { - u64 err_status : 1, - err_type : 1, - bus_id : 1, - bus_address : 1, - bus_data : 1, - bus_cmd : 1, - requestor_id : 1, - responder_id : 1, - target_id : 1, - oem_data : 1, - reserved : 54; - } valid; - u64 err_status; - u16 err_type; - u16 bus_id; - u32 reserved; - u64 bus_address; - u64 bus_data; - u64 bus_cmd; - u64 requestor_id; - u64 responder_id; - u64 target_id; - u8 oem_data[1]; /* Variable length data */ -} sal_log_pci_bus_err_info_t; - -typedef struct sal_log_smbios_dev_err_info { - sal_log_section_hdr_t header; - struct { - u64 event_type : 1, - length : 1, - time_stamp : 1, - data : 1, - reserved1 : 60; - } valid; - u8 event_type; - u8 length; - u8 time_stamp[6]; - u8 data[1]; /* data of variable length, length == slsmb_length */ -} sal_log_smbios_dev_err_info_t; - -typedef struct sal_log_pci_comp_err_info { - sal_log_section_hdr_t header; - struct { - u64 err_status : 1, - comp_info : 1, - num_mem_regs : 1, - num_io_regs : 1, - reg_data_pairs : 1, - oem_data : 1, - reserved : 58; - } valid; - u64 err_status; - struct { - u16 vendor_id; - u16 device_id; - u8 class_code[3]; - u8 func_num; - u8 dev_num; - u8 bus_num; - u8 seg_num; - u8 reserved[5]; - } comp_info; - u32 num_mem_regs; - u32 num_io_regs; - u64 reg_data_pairs[1]; - /* - * array of address/data register pairs is num_mem_regs + num_io_regs elements - * long. Each array element consists of a u64 address followed by a u64 data - * value. The oem_data array immediately follows the reg_data_pairs array - */ - u8 oem_data[1]; /* Variable length data */ -} sal_log_pci_comp_err_info_t; - -typedef struct sal_log_plat_specific_err_info { - sal_log_section_hdr_t header; - struct { - u64 err_status : 1, - guid : 1, - oem_data : 1, - reserved : 61; - } valid; - u64 err_status; - efi_guid_t guid; - u8 oem_data[1]; /* platform specific variable length data */ -} sal_log_plat_specific_err_info_t; - -typedef struct sal_log_host_ctlr_err_info { - sal_log_section_hdr_t header; - struct { - u64 err_status : 1, - requestor_id : 1, - responder_id : 1, - target_id : 1, - bus_spec_data : 1, - oem_data : 1, - reserved : 58; - } valid; - u64 err_status; - u64 requestor_id; - u64 responder_id; - u64 target_id; - u64 bus_spec_data; - u8 oem_data[1]; /* Variable length OEM data */ -} sal_log_host_ctlr_err_info_t; - -typedef struct sal_log_plat_bus_err_info { - sal_log_section_hdr_t header; - struct { - u64 err_status : 1, - requestor_id : 1, - responder_id : 1, - target_id : 1, - bus_spec_data : 1, - oem_data : 1, - reserved : 58; - } valid; - u64 err_status; - u64 requestor_id; - u64 responder_id; - u64 target_id; - u64 bus_spec_data; - u8 oem_data[1]; /* Variable length OEM data */ -} sal_log_plat_bus_err_info_t; - -/* Overall platform error section structure */ -typedef union sal_log_platform_err_info { - sal_log_mem_dev_err_info_t mem_dev_err; - sal_log_sel_dev_err_info_t sel_dev_err; - sal_log_pci_bus_err_info_t pci_bus_err; - sal_log_smbios_dev_err_info_t smbios_dev_err; - sal_log_pci_comp_err_info_t pci_comp_err; - sal_log_plat_specific_err_info_t plat_specific_err; - sal_log_host_ctlr_err_info_t host_ctlr_err; - sal_log_plat_bus_err_info_t plat_bus_err; -} sal_log_platform_err_info_t; - -/* SAL log over-all, multi-section error record structure (processor+platform) */ -typedef struct err_rec { - sal_log_record_header_t sal_elog_header; - sal_log_processor_info_t proc_err; - sal_log_platform_err_info_t plat_err; - u8 oem_data_pad[1024]; -} ia64_err_rec_t; - -/* - * Now define a couple of inline functions for improved type checking - * and convenience. - */ - -extern s64 ia64_sal_cache_flush (u64 cache_type); -extern void __init check_sal_cache_flush (void); - -/* Initialize all the processor and platform level instruction and data caches */ -static inline s64 -ia64_sal_cache_init (void) -{ - struct ia64_sal_retval isrv; - SAL_CALL(isrv, SAL_CACHE_INIT, 0, 0, 0, 0, 0, 0, 0); - return isrv.status; -} - -/* - * Clear the processor and platform information logged by SAL with respect to the machine - * state at the time of MCA's, INITs, CMCs, or CPEs. - */ -static inline s64 -ia64_sal_clear_state_info (u64 sal_info_type) -{ - struct ia64_sal_retval isrv; - SAL_CALL_REENTRANT(isrv, SAL_CLEAR_STATE_INFO, sal_info_type, 0, - 0, 0, 0, 0, 0); - return isrv.status; -} - - -/* Get the processor and platform information logged by SAL with respect to the machine - * state at the time of the MCAs, INITs, CMCs, or CPEs. - */ -static inline u64 -ia64_sal_get_state_info (u64 sal_info_type, u64 *sal_info) -{ - struct ia64_sal_retval isrv; - SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO, sal_info_type, 0, - sal_info, 0, 0, 0, 0); - if (isrv.status) - return 0; - - return isrv.v0; -} - -/* - * Get the maximum size of the information logged by SAL with respect to the machine state - * at the time of MCAs, INITs, CMCs, or CPEs. - */ -static inline u64 -ia64_sal_get_state_info_size (u64 sal_info_type) -{ - struct ia64_sal_retval isrv; - SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO_SIZE, sal_info_type, 0, - 0, 0, 0, 0, 0); - if (isrv.status) - return 0; - return isrv.v0; -} - -/* - * Causes the processor to go into a spin loop within SAL where SAL awaits a wakeup from - * the monarch processor. Must not lock, because it will not return on any cpu until the - * monarch processor sends a wake up. - */ -static inline s64 -ia64_sal_mc_rendez (void) -{ - struct ia64_sal_retval isrv; - SAL_CALL_NOLOCK(isrv, SAL_MC_RENDEZ, 0, 0, 0, 0, 0, 0, 0); - return isrv.status; -} - -/* - * Allow the OS to specify the interrupt number to be used by SAL to interrupt OS during - * the machine check rendezvous sequence as well as the mechanism to wake up the - * non-monarch processor at the end of machine check processing. - * Returns the complete ia64_sal_retval because some calls return more than just a status - * value. - */ -static inline struct ia64_sal_retval -ia64_sal_mc_set_params (u64 param_type, u64 i_or_m, u64 i_or_m_val, u64 timeout, u64 rz_always) -{ - struct ia64_sal_retval isrv; - SAL_CALL(isrv, SAL_MC_SET_PARAMS, param_type, i_or_m, i_or_m_val, - timeout, rz_always, 0, 0); - return isrv; -} - -/* Read from PCI configuration space */ -static inline s64 -ia64_sal_pci_config_read (u64 pci_config_addr, int type, u64 size, u64 *value) -{ - struct ia64_sal_retval isrv; - SAL_CALL(isrv, SAL_PCI_CONFIG_READ, pci_config_addr, size, type, 0, 0, 0, 0); - if (value) - *value = isrv.v0; - return isrv.status; -} - -/* Write to PCI configuration space */ -static inline s64 -ia64_sal_pci_config_write (u64 pci_config_addr, int type, u64 size, u64 value) -{ - struct ia64_sal_retval isrv; - SAL_CALL(isrv, SAL_PCI_CONFIG_WRITE, pci_config_addr, size, value, - type, 0, 0, 0); - return isrv.status; -} - -/* - * Register physical addresses of locations needed by SAL when SAL procedures are invoked - * in virtual mode. - */ -static inline s64 -ia64_sal_register_physical_addr (u64 phys_entry, u64 phys_addr) -{ - struct ia64_sal_retval isrv; - SAL_CALL(isrv, SAL_REGISTER_PHYSICAL_ADDR, phys_entry, phys_addr, - 0, 0, 0, 0, 0); - return isrv.status; -} - -/* - * Register software dependent code locations within SAL. These locations are handlers or - * entry points where SAL will pass control for the specified event. These event handlers - * are for the bott rendezvous, MCAs and INIT scenarios. - */ -static inline s64 -ia64_sal_set_vectors (u64 vector_type, - u64 handler_addr1, u64 gp1, u64 handler_len1, - u64 handler_addr2, u64 gp2, u64 handler_len2) -{ - struct ia64_sal_retval isrv; - SAL_CALL(isrv, SAL_SET_VECTORS, vector_type, - handler_addr1, gp1, handler_len1, - handler_addr2, gp2, handler_len2); - - return isrv.status; -} - -/* Update the contents of PAL block in the non-volatile storage device */ -static inline s64 -ia64_sal_update_pal (u64 param_buf, u64 scratch_buf, u64 scratch_buf_size, - u64 *error_code, u64 *scratch_buf_size_needed) -{ - struct ia64_sal_retval isrv; - SAL_CALL(isrv, SAL_UPDATE_PAL, param_buf, scratch_buf, scratch_buf_size, - 0, 0, 0, 0); - if (error_code) - *error_code = isrv.v0; - if (scratch_buf_size_needed) - *scratch_buf_size_needed = isrv.v1; - return isrv.status; -} - -/* Get physical processor die mapping in the platform. */ -static inline s64 -ia64_sal_physical_id_info(u16 *splid) -{ - struct ia64_sal_retval isrv; - - if (sal_revision < SAL_VERSION_CODE(3,2)) - return -1; - - SAL_CALL(isrv, SAL_PHYSICAL_ID_INFO, 0, 0, 0, 0, 0, 0, 0); - if (splid) - *splid = isrv.v0; - return isrv.status; -} - -extern unsigned long sal_platform_features; - -extern int (*salinfo_platform_oemdata)(const u8 *, u8 **, u64 *); - -struct sal_ret_values { - long r8; long r9; long r10; long r11; -}; - -#define IA64_SAL_OEMFUNC_MIN 0x02000000 -#define IA64_SAL_OEMFUNC_MAX 0x03ffffff - -extern int ia64_sal_oemcall(struct ia64_sal_retval *, u64, u64, u64, u64, u64, - u64, u64, u64); -extern int ia64_sal_oemcall_nolock(struct ia64_sal_retval *, u64, u64, u64, - u64, u64, u64, u64, u64); -extern int ia64_sal_oemcall_reentrant(struct ia64_sal_retval *, u64, u64, u64, - u64, u64, u64, u64, u64); -extern long -ia64_sal_freq_base (unsigned long which, unsigned long *ticks_per_second, - unsigned long *drift_info); -#ifdef CONFIG_HOTPLUG_CPU -/* - * System Abstraction Layer Specification - * Section 3.2.5.1: OS_BOOT_RENDEZ to SAL return State. - * Note: region regs are stored first in head.S _start. Hence they must - * stay up front. - */ -struct sal_to_os_boot { - u64 rr[8]; /* Region Registers */ - u64 br[6]; /* br0: - * return addr into SAL boot rendez routine */ - u64 gr1; /* SAL:GP */ - u64 gr12; /* SAL:SP */ - u64 gr13; /* SAL: Task Pointer */ - u64 fpsr; - u64 pfs; - u64 rnat; - u64 unat; - u64 bspstore; - u64 dcr; /* Default Control Register */ - u64 iva; - u64 pta; - u64 itv; - u64 pmv; - u64 cmcv; - u64 lrr[2]; - u64 gr[4]; - u64 pr; /* Predicate registers */ - u64 lc; /* Loop Count */ - struct ia64_fpreg fp[20]; -}; - -/* - * Global array allocated for NR_CPUS at boot time - */ -extern struct sal_to_os_boot sal_boot_rendez_state[NR_CPUS]; - -extern void ia64_jump_to_sal(struct sal_to_os_boot *); -#endif - -extern void ia64_sal_handler_init(void *entry_point, void *gpval); - -#define PALO_MAX_TLB_PURGES 0xFFFF -#define PALO_SIG "PALO" - -struct palo_table { - u8 signature[4]; /* Should be "PALO" */ - u32 length; - u8 minor_revision; - u8 major_revision; - u8 checksum; - u8 reserved1[5]; - u16 max_tlb_purges; - u8 reserved2[6]; -}; - -#define NPTCG_FROM_PAL 0 -#define NPTCG_FROM_PALO 1 -#define NPTCG_FROM_KERNEL_PARAMETER 2 - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_IA64_SAL_H */ diff --git a/include/asm-ia64/scatterlist.h b/include/asm-ia64/scatterlist.h deleted file mode 100644 index d6f57874041d..000000000000 --- a/include/asm-ia64/scatterlist.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef _ASM_IA64_SCATTERLIST_H -#define _ASM_IA64_SCATTERLIST_H - -/* - * Modified 1998-1999, 2001-2002, 2004 - * David Mosberger-Tang , Hewlett-Packard Co - */ - -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - unsigned int length; /* buffer length */ - - dma_addr_t dma_address; - unsigned int dma_length; -}; - -/* - * It used to be that ISA_DMA_THRESHOLD had something to do with the - * DMA-limits of ISA-devices. Nowadays, its only remaining use (apart - * from the aha1542.c driver, which isn't 64-bit clean anyhow) is to - * tell the block-layer (via BLK_BOUNCE_ISA) what the max. physical - * address of a page is that is allocated with GFP_DMA. On IA-64, - * that's 4GB - 1. - */ -#define ISA_DMA_THRESHOLD 0xffffffff - -#define sg_dma_len(sg) ((sg)->dma_length) -#define sg_dma_address(sg) ((sg)->dma_address) - -#define ARCH_HAS_SG_CHAIN - -#endif /* _ASM_IA64_SCATTERLIST_H */ diff --git a/include/asm-ia64/sections.h b/include/asm-ia64/sections.h deleted file mode 100644 index 7286e4a9fe84..000000000000 --- a/include/asm-ia64/sections.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASM_IA64_SECTIONS_H -#define _ASM_IA64_SECTIONS_H - -/* - * Copyright (C) 1998-2003 Hewlett-Packard Co - * David Mosberger-Tang - */ - -#include - -extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[]; -extern char __start___vtop_patchlist[], __end___vtop_patchlist[]; -extern char __start___rse_patchlist[], __end___rse_patchlist[]; -extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[]; -extern char __start___phys_stack_reg_patchlist[], __end___phys_stack_reg_patchlist[]; -extern char __start_gate_section[]; -extern char __start_gate_mckinley_e9_patchlist[], __end_gate_mckinley_e9_patchlist[]; -extern char __start_gate_vtop_patchlist[], __end_gate_vtop_patchlist[]; -extern char __start_gate_fsyscall_patchlist[], __end_gate_fsyscall_patchlist[]; -extern char __start_gate_brl_fsys_bubble_down_patchlist[], __end_gate_brl_fsys_bubble_down_patchlist[]; -extern char __start_unwind[], __end_unwind[]; -extern char __start_ivt_text[], __end_ivt_text[]; - -#endif /* _ASM_IA64_SECTIONS_H */ - diff --git a/include/asm-ia64/segment.h b/include/asm-ia64/segment.h deleted file mode 100644 index b89e2b3d648f..000000000000 --- a/include/asm-ia64/segment.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_IA64_SEGMENT_H -#define _ASM_IA64_SEGMENT_H - -/* Only here because we have some old header files that expect it.. */ - -#endif /* _ASM_IA64_SEGMENT_H */ diff --git a/include/asm-ia64/sembuf.h b/include/asm-ia64/sembuf.h deleted file mode 100644 index 1340fbc04d3e..000000000000 --- a/include/asm-ia64/sembuf.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _ASM_IA64_SEMBUF_H -#define _ASM_IA64_SEMBUF_H - -/* - * The semid64_ds structure for IA-64 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 2 miscellaneous 64-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - __kernel_time_t sem_ctime; /* last change time */ - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ASM_IA64_SEMBUF_H */ diff --git a/include/asm-ia64/serial.h b/include/asm-ia64/serial.h deleted file mode 100644 index 0c7a2f3dcf13..000000000000 --- a/include/asm-ia64/serial.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-ia64/serial.h - * - * Derived from the i386 version. - */ - -/* - * This assumes you have a 1.8432 MHz clock for your UART. - * - * It'd be nice if someone built a serial card with a 24.576 MHz - * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. - */ -#define BASE_BAUD ( 1843200 / 16 ) - -/* - * All legacy serial ports should be enumerated via ACPI namespace, so - * we need not list them here. - */ diff --git a/include/asm-ia64/setup.h b/include/asm-ia64/setup.h deleted file mode 100644 index 4399a44355b3..000000000000 --- a/include/asm-ia64/setup.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __IA64_SETUP_H -#define __IA64_SETUP_H - -#define COMMAND_LINE_SIZE 2048 - -#endif diff --git a/include/asm-ia64/shmbuf.h b/include/asm-ia64/shmbuf.h deleted file mode 100644 index 585002a77acd..000000000000 --- a/include/asm-ia64/shmbuf.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef _ASM_IA64_SHMBUF_H -#define _ASM_IA64_SHMBUF_H - -/* - * The shmid64_ds structure for IA-64 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 2 miscellaneous 64-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - __kernel_time_t shm_dtime; /* last detach time */ - __kernel_time_t shm_ctime; /* last change time */ - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused1; - unsigned long __unused2; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_IA64_SHMBUF_H */ diff --git a/include/asm-ia64/shmparam.h b/include/asm-ia64/shmparam.h deleted file mode 100644 index d07508dc54ae..000000000000 --- a/include/asm-ia64/shmparam.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_IA64_SHMPARAM_H -#define _ASM_IA64_SHMPARAM_H - -/* - * SHMLBA controls minimum alignment at which shared memory segments - * get attached. The IA-64 architecture says that there may be a - * performance degradation when there are virtual aliases within 1MB. - * To reduce the chance of this, we set SHMLBA to 1MB. --davidm 00/12/20 - */ -#define SHMLBA (1024*1024) - -#endif /* _ASM_IA64_SHMPARAM_H */ diff --git a/include/asm-ia64/sigcontext.h b/include/asm-ia64/sigcontext.h deleted file mode 100644 index 57ff777bcc40..000000000000 --- a/include/asm-ia64/sigcontext.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef _ASM_IA64_SIGCONTEXT_H -#define _ASM_IA64_SIGCONTEXT_H - -/* - * Copyright (C) 1998, 1999, 2001 Hewlett-Packard Co - * Copyright (C) 1998, 1999, 2001 David Mosberger-Tang - */ - -#include - -#define IA64_SC_FLAG_ONSTACK_BIT 0 /* is handler running on signal stack? */ -#define IA64_SC_FLAG_IN_SYSCALL_BIT 1 /* did signal interrupt a syscall? */ -#define IA64_SC_FLAG_FPH_VALID_BIT 2 /* is state in f[32]-f[127] valid? */ - -#define IA64_SC_FLAG_ONSTACK (1 << IA64_SC_FLAG_ONSTACK_BIT) -#define IA64_SC_FLAG_IN_SYSCALL (1 << IA64_SC_FLAG_IN_SYSCALL_BIT) -#define IA64_SC_FLAG_FPH_VALID (1 << IA64_SC_FLAG_FPH_VALID_BIT) - -# ifndef __ASSEMBLY__ - -/* - * Note on handling of register backing store: sc_ar_bsp contains the address that would - * be found in ar.bsp after executing a "cover" instruction the context in which the - * signal was raised. If signal delivery required switching to an alternate signal stack - * (sc_rbs_base is not NULL), the "dirty" partition (as it would exist after executing the - * imaginary "cover" instruction) is backed by the *alternate* signal stack, not the - * original one. In this case, sc_rbs_base contains the base address of the new register - * backing store. The number of registers in the dirty partition can be calculated as: - * - * ndirty = ia64_rse_num_regs(sc_rbs_base, sc_rbs_base + (sc_loadrs >> 16)) - * - */ - -struct sigcontext { - unsigned long sc_flags; /* see manifest constants above */ - unsigned long sc_nat; /* bit i == 1 iff scratch reg gr[i] is a NaT */ - stack_t sc_stack; /* previously active stack */ - - unsigned long sc_ip; /* instruction pointer */ - unsigned long sc_cfm; /* current frame marker */ - unsigned long sc_um; /* user mask bits */ - unsigned long sc_ar_rsc; /* register stack configuration register */ - unsigned long sc_ar_bsp; /* backing store pointer */ - unsigned long sc_ar_rnat; /* RSE NaT collection register */ - unsigned long sc_ar_ccv; /* compare and exchange compare value register */ - unsigned long sc_ar_unat; /* ar.unat of interrupted context */ - unsigned long sc_ar_fpsr; /* floating-point status register */ - unsigned long sc_ar_pfs; /* previous function state */ - unsigned long sc_ar_lc; /* loop count register */ - unsigned long sc_pr; /* predicate registers */ - unsigned long sc_br[8]; /* branch registers */ - /* Note: sc_gr[0] is used as the "uc_link" member of ucontext_t */ - unsigned long sc_gr[32]; /* general registers (static partition) */ - struct ia64_fpreg sc_fr[128]; /* floating-point registers */ - - unsigned long sc_rbs_base; /* NULL or new base of sighandler's rbs */ - unsigned long sc_loadrs; /* see description above */ - - unsigned long sc_ar25; /* cmp8xchg16 uses this */ - unsigned long sc_ar26; /* rsvd for scratch use */ - unsigned long sc_rsvd[12]; /* reserved for future use */ - /* - * The mask must come last so we can increase _NSIG_WORDS - * without breaking binary compatibility. - */ - sigset_t sc_mask; /* signal mask to restore after handler returns */ -}; - -# endif /* __ASSEMBLY__ */ -#endif /* _ASM_IA64_SIGCONTEXT_H */ diff --git a/include/asm-ia64/siginfo.h b/include/asm-ia64/siginfo.h deleted file mode 100644 index 9294e4b0c8bc..000000000000 --- a/include/asm-ia64/siginfo.h +++ /dev/null @@ -1,139 +0,0 @@ -#ifndef _ASM_IA64_SIGINFO_H -#define _ASM_IA64_SIGINFO_H - -/* - * Based on . - * - * Modified 1998-2002 - * David Mosberger-Tang , Hewlett-Packard Co - */ - -#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) - -#define HAVE_ARCH_SIGINFO_T -#define HAVE_ARCH_COPY_SIGINFO -#define HAVE_ARCH_COPY_SIGINFO_TO_USER - -#include - -typedef struct siginfo { - int si_signo; - int si_errno; - int si_code; - int __pad0; - - union { - int _pad[SI_PAD_SIZE]; - - /* kill() */ - struct { - pid_t _pid; /* sender's pid */ - uid_t _uid; /* sender's uid */ - } _kill; - - /* POSIX.1b timers */ - struct { - timer_t _tid; /* timer id */ - int _overrun; /* overrun count */ - char _pad[sizeof(__ARCH_SI_UID_T) - sizeof(int)]; - sigval_t _sigval; /* must overlay ._rt._sigval! */ - int _sys_private; /* not to be passed to user */ - } _timer; - - /* POSIX.1b signals */ - struct { - pid_t _pid; /* sender's pid */ - uid_t _uid; /* sender's uid */ - sigval_t _sigval; - } _rt; - - /* SIGCHLD */ - struct { - pid_t _pid; /* which child */ - uid_t _uid; /* sender's uid */ - int _status; /* exit code */ - clock_t _utime; - clock_t _stime; - } _sigchld; - - /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ - struct { - void __user *_addr; /* faulting insn/memory ref. */ - int _imm; /* immediate value for "break" */ - unsigned int _flags; /* see below */ - unsigned long _isr; /* isr */ - } _sigfault; - - /* SIGPOLL */ - struct { - long _band; /* POLL_IN, POLL_OUT, POLL_MSG (XPG requires a "long") */ - int _fd; - } _sigpoll; - } _sifields; -} siginfo_t; - -#define si_imm _sifields._sigfault._imm /* as per UNIX SysV ABI spec */ -#define si_flags _sifields._sigfault._flags -/* - * si_isr is valid for SIGILL, SIGFPE, SIGSEGV, SIGBUS, and SIGTRAP provided that - * si_code is non-zero and __ISR_VALID is set in si_flags. - */ -#define si_isr _sifields._sigfault._isr - -/* - * Flag values for si_flags: - */ -#define __ISR_VALID_BIT 0 -#define __ISR_VALID (1 << __ISR_VALID_BIT) - -/* - * SIGILL si_codes - */ -#define ILL_BADIADDR (__SI_FAULT|9) /* unimplemented instruction address */ -#define __ILL_BREAK (__SI_FAULT|10) /* illegal break */ -#define __ILL_BNDMOD (__SI_FAULT|11) /* bundle-update (modification) in progress */ -#undef NSIGILL -#define NSIGILL 11 - -/* - * SIGFPE si_codes - */ -#define __FPE_DECOVF (__SI_FAULT|9) /* decimal overflow */ -#define __FPE_DECDIV (__SI_FAULT|10) /* decimal division by zero */ -#define __FPE_DECERR (__SI_FAULT|11) /* packed decimal error */ -#define __FPE_INVASC (__SI_FAULT|12) /* invalid ASCII digit */ -#define __FPE_INVDEC (__SI_FAULT|13) /* invalid decimal digit */ -#undef NSIGFPE -#define NSIGFPE 13 - -/* - * SIGSEGV si_codes - */ -#define __SEGV_PSTKOVF (__SI_FAULT|3) /* paragraph stack overflow */ -#undef NSIGSEGV -#define NSIGSEGV 3 - -/* - * SIGTRAP si_codes - */ -#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */ -#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint or watchpoint */ -#undef NSIGTRAP -#define NSIGTRAP 4 - -#ifdef __KERNEL__ -#include - -static inline void -copy_siginfo (siginfo_t *to, siginfo_t *from) -{ - if (from->si_code < 0) - memcpy(to, from, sizeof(siginfo_t)); - else - /* _sigchld is currently the largest know union member */ - memcpy(to, from, 4*sizeof(int) + sizeof(from->_sifields._sigchld)); -} - -#endif /* __KERNEL__ */ - -#endif /* _ASM_IA64_SIGINFO_H */ diff --git a/include/asm-ia64/signal.h b/include/asm-ia64/signal.h deleted file mode 100644 index 4f5ca5643cb1..000000000000 --- a/include/asm-ia64/signal.h +++ /dev/null @@ -1,160 +0,0 @@ -#ifndef _ASM_IA64_SIGNAL_H -#define _ASM_IA64_SIGNAL_H - -/* - * Modified 1998-2001, 2003 - * David Mosberger-Tang , Hewlett-Packard Co - * - * Unfortunately, this file is being included by bits/signal.h in - * glibc-2.x. Hence the #ifdef __KERNEL__ ugliness. - */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -/* signal 31 is no longer "unused", but the SIGUNUSED macro remains for backwards compatibility */ -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -/* - * The minimum stack size needs to be fairly large because we want to - * be sure that an app compiled for today's CPUs will continue to run - * on all future CPU models. The CPU model matters because the signal - * frame needs to have space for the complete machine state, including - * all physical stacked registers. The number of physical stacked - * registers is CPU model dependent, but given that the width of - * ar.rsc.loadrs is 14 bits, we can assume that they'll never take up - * more than 16KB of space. - */ -#if 1 - /* - * This is a stupid typo: the value was _meant_ to be 131072 (0x20000), but I typed it - * in wrong. ;-( To preserve backwards compatibility, we leave the kernel at the - * incorrect value and fix libc only. - */ -# define MINSIGSTKSZ 131027 /* min. stack size for sigaltstack() */ -#else -# define MINSIGSTKSZ 131072 /* min. stack size for sigaltstack() */ -#endif -#define SIGSTKSZ 262144 /* default stack size for sigaltstack() */ - -#ifdef __KERNEL__ - -#define _NSIG 64 -#define _NSIG_BPW 64 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -#endif /* __KERNEL__ */ - -#include - -# ifndef __ASSEMBLY__ - -# include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ - -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -typedef unsigned long old_sigset_t; - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; - -# include - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -# endif /* !__ASSEMBLY__ */ -#endif /* _ASM_IA64_SIGNAL_H */ diff --git a/include/asm-ia64/smp.h b/include/asm-ia64/smp.h deleted file mode 100644 index 12d96e0cd513..000000000000 --- a/include/asm-ia64/smp.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * SMP Support - * - * Copyright (C) 1999 VA Linux Systems - * Copyright (C) 1999 Walt Drummond - * (c) Copyright 2001-2003, 2005 Hewlett-Packard Development Company, L.P. - * David Mosberger-Tang - * Bjorn Helgaas - */ -#ifndef _ASM_IA64_SMP_H -#define _ASM_IA64_SMP_H - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -static inline unsigned int -ia64_get_lid (void) -{ - union { - struct { - unsigned long reserved : 16; - unsigned long eid : 8; - unsigned long id : 8; - unsigned long ignored : 32; - } f; - unsigned long bits; - } lid; - - lid.bits = ia64_getreg(_IA64_REG_CR_LID); - return lid.f.id << 8 | lid.f.eid; -} - -#define hard_smp_processor_id() ia64_get_lid() - -#ifdef CONFIG_SMP - -#define XTP_OFFSET 0x1e0008 - -#define SMP_IRQ_REDIRECTION (1 << 0) -#define SMP_IPI_REDIRECTION (1 << 1) - -#define raw_smp_processor_id() (current_thread_info()->cpu) - -extern struct smp_boot_data { - int cpu_count; - int cpu_phys_id[NR_CPUS]; -} smp_boot_data __initdata; - -extern char no_int_routing __devinitdata; - -extern cpumask_t cpu_online_map; -extern cpumask_t cpu_core_map[NR_CPUS]; -DECLARE_PER_CPU(cpumask_t, cpu_sibling_map); -extern int smp_num_siblings; -extern void __iomem *ipi_base_addr; -extern unsigned char smp_int_redirect; - -extern volatile int ia64_cpu_to_sapicid[]; -#define cpu_physical_id(i) ia64_cpu_to_sapicid[i] - -extern unsigned long ap_wakeup_vector; - -/* - * Function to map hard smp processor id to logical id. Slow, so don't use this in - * performance-critical code. - */ -static inline int -cpu_logical_id (int cpuid) -{ - int i; - - for (i = 0; i < NR_CPUS; ++i) - if (cpu_physical_id(i) == cpuid) - break; - return i; -} - -/* - * XTP control functions: - * min_xtp : route all interrupts to this CPU - * normal_xtp: nominal XTP value - * max_xtp : never deliver interrupts to this CPU. - */ - -static inline void -min_xtp (void) -{ - if (smp_int_redirect & SMP_IRQ_REDIRECTION) - writeb(0x00, ipi_base_addr + XTP_OFFSET); /* XTP to min */ -} - -static inline void -normal_xtp (void) -{ - if (smp_int_redirect & SMP_IRQ_REDIRECTION) - writeb(0x08, ipi_base_addr + XTP_OFFSET); /* XTP normal */ -} - -static inline void -max_xtp (void) -{ - if (smp_int_redirect & SMP_IRQ_REDIRECTION) - writeb(0x0f, ipi_base_addr + XTP_OFFSET); /* Set XTP to max */ -} - -/* Upping and downing of CPUs */ -extern int __cpu_disable (void); -extern void __cpu_die (unsigned int cpu); -extern void cpu_die (void) __attribute__ ((noreturn)); -extern void __init smp_build_cpu_map(void); - -extern void __init init_smp_config (void); -extern void smp_do_timer (struct pt_regs *regs); - -extern irqreturn_t handle_IPI(int irq, void *dev_id); -extern void smp_send_reschedule (int cpu); -extern void identify_siblings (struct cpuinfo_ia64 *); -extern int is_multithreading_enabled(void); - -extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi(cpumask_t mask); - -#else /* CONFIG_SMP */ - -#define cpu_logical_id(i) 0 -#define cpu_physical_id(i) ia64_get_lid() - -#endif /* CONFIG_SMP */ -#endif /* _ASM_IA64_SMP_H */ diff --git a/include/asm-ia64/sn/acpi.h b/include/asm-ia64/sn/acpi.h deleted file mode 100644 index 9ce2801cbd57..000000000000 --- a/include/asm-ia64/sn/acpi.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_ACPI_H -#define _ASM_IA64_SN_ACPI_H - -#include "acpi/acglobal.h" - -extern int sn_acpi_rev; -#define SN_ACPI_BASE_SUPPORT() (sn_acpi_rev >= 0x20101) - -#endif /* _ASM_IA64_SN_ACPI_H */ diff --git a/include/asm-ia64/sn/addrs.h b/include/asm-ia64/sn/addrs.h deleted file mode 100644 index e715c794b186..000000000000 --- a/include/asm-ia64/sn/addrs.h +++ /dev/null @@ -1,299 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 1992-1999,2001-2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_ADDRS_H -#define _ASM_IA64_SN_ADDRS_H - -#include -#include -#include -#include - -/* - * Memory/SHUB Address Format: - * +-+---------+--+--------------+ - * |0| NASID |AS| NodeOffset | - * +-+---------+--+--------------+ - * - * NASID: (low NASID bit is 0) Memory and SHUB MMRs - * AS: 2-bit Address Space Identifier. Used only if low NASID bit is 0 - * 00: Local Resources and MMR space - * Top bit of NodeOffset - * 0: Local resources space - * node id: - * 0: IA64/NT compatibility space - * 2: Local MMR Space - * 4: Local memory, regardless of local node id - * 1: Global MMR space - * 01: GET space. - * 10: AMO space. - * 11: Cacheable memory space. - * - * NodeOffset: byte offset - * - * - * TIO address format: - * +-+----------+--+--------------+ - * |0| NASID |AS| Nodeoffset | - * +-+----------+--+--------------+ - * - * NASID: (low NASID bit is 1) TIO - * AS: 2-bit Chiplet Identifier - * 00: TIO LB (Indicates TIO MMR access.) - * 01: TIO ICE (indicates coretalk space access.) - * - * NodeOffset: top bit must be set. - * - * - * Note that in both of the above address formats, the low - * NASID bit indicates if the reference is to the SHUB or TIO MMRs. - */ - - -/* - * Define basic shift & mask constants for manipulating NASIDs and AS values. - */ -#define NASID_BITMASK (sn_hub_info->nasid_bitmask) -#define NASID_SHIFT (sn_hub_info->nasid_shift) -#define AS_SHIFT (sn_hub_info->as_shift) -#define AS_BITMASK 0x3UL - -#define NASID_MASK ((u64)NASID_BITMASK << NASID_SHIFT) -#define AS_MASK ((u64)AS_BITMASK << AS_SHIFT) - - -/* - * AS values. These are the same on both SHUB1 & SHUB2. - */ -#define AS_GET_VAL 1UL -#define AS_AMO_VAL 2UL -#define AS_CAC_VAL 3UL -#define AS_GET_SPACE (AS_GET_VAL << AS_SHIFT) -#define AS_AMO_SPACE (AS_AMO_VAL << AS_SHIFT) -#define AS_CAC_SPACE (AS_CAC_VAL << AS_SHIFT) - - -/* - * Virtual Mode Local & Global MMR space. - */ -#define SH1_LOCAL_MMR_OFFSET 0x8000000000UL -#define SH2_LOCAL_MMR_OFFSET 0x0200000000UL -#define LOCAL_MMR_OFFSET (is_shub2() ? SH2_LOCAL_MMR_OFFSET : SH1_LOCAL_MMR_OFFSET) -#define LOCAL_MMR_SPACE (__IA64_UNCACHED_OFFSET | LOCAL_MMR_OFFSET) -#define LOCAL_PHYS_MMR_SPACE (RGN_BASE(RGN_HPAGE) | LOCAL_MMR_OFFSET) - -#define SH1_GLOBAL_MMR_OFFSET 0x0800000000UL -#define SH2_GLOBAL_MMR_OFFSET 0x0300000000UL -#define GLOBAL_MMR_OFFSET (is_shub2() ? SH2_GLOBAL_MMR_OFFSET : SH1_GLOBAL_MMR_OFFSET) -#define GLOBAL_MMR_SPACE (__IA64_UNCACHED_OFFSET | GLOBAL_MMR_OFFSET) - -/* - * Physical mode addresses - */ -#define GLOBAL_PHYS_MMR_SPACE (RGN_BASE(RGN_HPAGE) | GLOBAL_MMR_OFFSET) - - -/* - * Clear region & AS bits. - */ -#define TO_PHYS_MASK (~(RGN_BITS | AS_MASK)) - - -/* - * Misc NASID manipulation. - */ -#define NASID_SPACE(n) ((u64)(n) << NASID_SHIFT) -#define REMOTE_ADDR(n,a) (NASID_SPACE(n) | (a)) -#define NODE_OFFSET(x) ((x) & (NODE_ADDRSPACE_SIZE - 1)) -#define NODE_ADDRSPACE_SIZE (1UL << AS_SHIFT) -#define NASID_GET(x) (int) (((u64) (x) >> NASID_SHIFT) & NASID_BITMASK) -#define LOCAL_MMR_ADDR(a) (LOCAL_MMR_SPACE | (a)) -#define GLOBAL_MMR_ADDR(n,a) (GLOBAL_MMR_SPACE | REMOTE_ADDR(n,a)) -#define GLOBAL_MMR_PHYS_ADDR(n,a) (GLOBAL_PHYS_MMR_SPACE | REMOTE_ADDR(n,a)) -#define GLOBAL_CAC_ADDR(n,a) (CAC_BASE | REMOTE_ADDR(n,a)) -#define CHANGE_NASID(n,x) ((void *)(((u64)(x) & ~NASID_MASK) | NASID_SPACE(n))) -#define IS_TIO_NASID(n) ((n) & 1) - - -/* non-II mmr's start at top of big window space (4G) */ -#define BWIN_TOP 0x0000000100000000UL - -/* - * general address defines - */ -#define CAC_BASE (PAGE_OFFSET | AS_CAC_SPACE) -#define AMO_BASE (__IA64_UNCACHED_OFFSET | AS_AMO_SPACE) -#define AMO_PHYS_BASE (RGN_BASE(RGN_HPAGE) | AS_AMO_SPACE) -#define GET_BASE (PAGE_OFFSET | AS_GET_SPACE) - -/* - * Convert Memory addresses between various addressing modes. - */ -#define TO_PHYS(x) (TO_PHYS_MASK & (x)) -#define TO_CAC(x) (CAC_BASE | TO_PHYS(x)) -#ifdef CONFIG_SGI_SN -#define TO_AMO(x) (AMO_BASE | TO_PHYS(x)) -#define TO_GET(x) (GET_BASE | TO_PHYS(x)) -#else -#define TO_AMO(x) ({ BUG(); x; }) -#define TO_GET(x) ({ BUG(); x; }) -#endif - -/* - * Covert from processor physical address to II/TIO physical address: - * II - squeeze out the AS bits - * TIO- requires a chiplet id in bits 38-39. For DMA to memory, - * the chiplet id is zero. If we implement TIO-TIO dma, we might need - * to insert a chiplet id into this macro. However, it is our belief - * right now that this chiplet id will be ICE, which is also zero. - */ -#define SH1_TIO_PHYS_TO_DMA(x) \ - ((((u64)(NASID_GET(x))) << 40) | NODE_OFFSET(x)) - -#define SH2_NETWORK_BANK_OFFSET(x) \ - ((u64)(x) & ((1UL << (sn_hub_info->nasid_shift - 4)) -1)) - -#define SH2_NETWORK_BANK_SELECT(x) \ - ((((u64)(x) & (0x3UL << (sn_hub_info->nasid_shift - 4))) \ - >> (sn_hub_info->nasid_shift - 4)) << 36) - -#define SH2_NETWORK_ADDRESS(x) \ - (SH2_NETWORK_BANK_OFFSET(x) | SH2_NETWORK_BANK_SELECT(x)) - -#define SH2_TIO_PHYS_TO_DMA(x) \ - (((u64)(NASID_GET(x)) << 40) | SH2_NETWORK_ADDRESS(x)) - -#define PHYS_TO_TIODMA(x) \ - (is_shub1() ? SH1_TIO_PHYS_TO_DMA(x) : SH2_TIO_PHYS_TO_DMA(x)) - -#define PHYS_TO_DMA(x) \ - ((((u64)(x) & NASID_MASK) >> 2) | NODE_OFFSET(x)) - - -/* - * Macros to test for address type. - */ -#define IS_AMO_ADDRESS(x) (((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_BASE) -#define IS_AMO_PHYS_ADDRESS(x) (((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_PHYS_BASE) - - -/* - * The following definitions pertain to the IO special address - * space. They define the location of the big and little windows - * of any given node. - */ -#define BWIN_SIZE_BITS 29 /* big window size: 512M */ -#define TIO_BWIN_SIZE_BITS 30 /* big window size: 1G */ -#define NODE_SWIN_BASE(n, w) ((w == 0) ? NODE_BWIN_BASE((n), SWIN0_BIGWIN) \ - : RAW_NODE_SWIN_BASE(n, w)) -#define TIO_SWIN_BASE(n, w) (TIO_IO_BASE(n) + \ - ((u64) (w) << TIO_SWIN_SIZE_BITS)) -#define NODE_IO_BASE(n) (GLOBAL_MMR_SPACE | NASID_SPACE(n)) -#define TIO_IO_BASE(n) (__IA64_UNCACHED_OFFSET | NASID_SPACE(n)) -#define BWIN_SIZE (1UL << BWIN_SIZE_BITS) -#define NODE_BWIN_BASE0(n) (NODE_IO_BASE(n) + BWIN_SIZE) -#define NODE_BWIN_BASE(n, w) (NODE_BWIN_BASE0(n) + ((u64) (w) << BWIN_SIZE_BITS)) -#define RAW_NODE_SWIN_BASE(n, w) (NODE_IO_BASE(n) + ((u64) (w) << SWIN_SIZE_BITS)) -#define BWIN_WIDGET_MASK 0x7 -#define BWIN_WINDOWNUM(x) (((x) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK) -#define SH1_IS_BIG_WINDOW_ADDR(x) ((x) & BWIN_TOP) - -#define TIO_BWIN_WINDOW_SELECT_MASK 0x7 -#define TIO_BWIN_WINDOWNUM(x) (((x) >> TIO_BWIN_SIZE_BITS) & TIO_BWIN_WINDOW_SELECT_MASK) - -#define TIO_HWIN_SHIFT_BITS 33 -#define TIO_HWIN(x) (NODE_OFFSET(x) >> TIO_HWIN_SHIFT_BITS) - -/* - * The following definitions pertain to the IO special address - * space. They define the location of the big and little windows - * of any given node. - */ - -#define SWIN_SIZE_BITS 24 -#define SWIN_WIDGET_MASK 0xF - -#define TIO_SWIN_SIZE_BITS 28 -#define TIO_SWIN_SIZE (1UL << TIO_SWIN_SIZE_BITS) -#define TIO_SWIN_WIDGET_MASK 0x3 - -/* - * Convert smallwindow address to xtalk address. - * - * 'addr' can be physical or virtual address, but will be converted - * to Xtalk address in the range 0 -> SWINZ_SIZEMASK - */ -#define SWIN_WIDGETNUM(x) (((x) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK) -#define TIO_SWIN_WIDGETNUM(x) (((x) >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK) - - -/* - * The following macros produce the correct base virtual address for - * the hub registers. The REMOTE_HUB_* macro produce - * the address for the specified hub's registers. The intent is - * that the appropriate PI, MD, NI, or II register would be substituted - * for x. - * - * WARNING: - * When certain Hub chip workaround are defined, it's not sufficient - * to dereference the *_HUB_ADDR() macros. You should instead use - * HUB_L() and HUB_S() if you must deal with pointers to hub registers. - * Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S(). - * They're always safe. - */ -/* Shub1 TIO & MMR addressing macros */ -#define SH1_TIO_IOSPACE_ADDR(n,x) \ - GLOBAL_MMR_ADDR(n,x) - -#define SH1_REMOTE_BWIN_MMR(n,x) \ - GLOBAL_MMR_ADDR(n,x) - -#define SH1_REMOTE_SWIN_MMR(n,x) \ - (NODE_SWIN_BASE(n,1) + 0x800000UL + (x)) - -#define SH1_REMOTE_MMR(n,x) \ - (SH1_IS_BIG_WINDOW_ADDR(x) ? SH1_REMOTE_BWIN_MMR(n,x) : \ - SH1_REMOTE_SWIN_MMR(n,x)) - -/* Shub1 TIO & MMR addressing macros */ -#define SH2_TIO_IOSPACE_ADDR(n,x) \ - ((__IA64_UNCACHED_OFFSET | REMOTE_ADDR(n,x) | 1UL << (NASID_SHIFT - 2))) - -#define SH2_REMOTE_MMR(n,x) \ - GLOBAL_MMR_ADDR(n,x) - - -/* TIO & MMR addressing macros that work on both shub1 & shub2 */ -#define TIO_IOSPACE_ADDR(n,x) \ - ((u64 *)(is_shub1() ? SH1_TIO_IOSPACE_ADDR(n,x) : \ - SH2_TIO_IOSPACE_ADDR(n,x))) - -#define SH_REMOTE_MMR(n,x) \ - (is_shub1() ? SH1_REMOTE_MMR(n,x) : SH2_REMOTE_MMR(n,x)) - -#define REMOTE_HUB_ADDR(n,x) \ - (IS_TIO_NASID(n) ? ((volatile u64*)TIO_IOSPACE_ADDR(n,x)) : \ - ((volatile u64*)SH_REMOTE_MMR(n,x))) - - -#define HUB_L(x) (*((volatile typeof(*x) *)x)) -#define HUB_S(x,d) (*((volatile typeof(*x) *)x) = (d)) - -#define REMOTE_HUB_L(n, a) HUB_L(REMOTE_HUB_ADDR((n), (a))) -#define REMOTE_HUB_S(n, a, d) HUB_S(REMOTE_HUB_ADDR((n), (a)), (d)) - -/* - * Coretalk address breakdown - */ -#define CTALK_NASID_SHFT 40 -#define CTALK_NASID_MASK (0x3FFFULL << CTALK_NASID_SHFT) -#define CTALK_CID_SHFT 38 -#define CTALK_CID_MASK (0x3ULL << CTALK_CID_SHFT) -#define CTALK_NODE_OFFSET 0x3FFFFFFFFF - -#endif /* _ASM_IA64_SN_ADDRS_H */ diff --git a/include/asm-ia64/sn/arch.h b/include/asm-ia64/sn/arch.h deleted file mode 100644 index 7caa1f44cd95..000000000000 --- a/include/asm-ia64/sn/arch.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * SGI specific setup. - * - * Copyright (C) 1995-1997,1999,2001-2005 Silicon Graphics, Inc. All rights reserved. - * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) - */ -#ifndef _ASM_IA64_SN_ARCH_H -#define _ASM_IA64_SN_ARCH_H - -#include -#include -#include -#include -#include - -/* - * This is the maximum number of NUMALINK nodes that can be part of a single - * SSI kernel. This number includes C-brick, M-bricks, and TIOs. Nodes in - * remote partitions are NOT included in this number. - * The number of compact nodes cannot exceed size of a coherency domain. - * The purpose of this define is to specify a node count that includes - * all C/M/TIO nodes in an SSI system. - * - * SGI system can currently support up to 256 C/M nodes plus additional TIO nodes. - * - * Note: ACPI20 has an architectural limit of 256 nodes. When we upgrade - * to ACPI3.0, this limit will be removed. The notion of "compact nodes" - * should be deleted and TIOs should be included in MAX_NUMNODES. - */ -#define MAX_TIO_NODES MAX_NUMNODES -#define MAX_COMPACT_NODES (MAX_NUMNODES + MAX_TIO_NODES) - -/* - * Maximum number of nodes in all partitions and in all coherency domains. - * This is the total number of nodes accessible in the numalink fabric. It - * includes all C & M bricks, plus all TIOs. - * - * This value is also the value of the maximum number of NASIDs in the numalink - * fabric. - */ -#define MAX_NUMALINK_NODES 16384 - -/* - * The following defines attributes of the HUB chip. These attributes are - * frequently referenced. They are kept in the per-cpu data areas of each cpu. - * They are kept together in a struct to minimize cache misses. - */ -struct sn_hub_info_s { - u8 shub2; - u8 nasid_shift; - u8 as_shift; - u8 shub_1_1_found; - u16 nasid_bitmask; -}; -DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info); -#define sn_hub_info (&__get_cpu_var(__sn_hub_info)) -#define is_shub2() (sn_hub_info->shub2) -#define is_shub1() (sn_hub_info->shub2 == 0) - -/* - * Use this macro to test if shub 1.1 wars should be enabled - */ -#define enable_shub_wars_1_1() (sn_hub_info->shub_1_1_found) - - -/* - * Compact node ID to nasid mappings kept in the per-cpu data areas of each - * cpu. - */ -DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]); -#define sn_cnodeid_to_nasid (&__get_cpu_var(__sn_cnodeid_to_nasid[0])) - - -extern u8 sn_partition_id; -extern u8 sn_system_size; -extern u8 sn_sharing_domain_size; -extern u8 sn_region_size; - -extern void sn_flush_all_caches(long addr, long bytes); -extern bool sn_cpu_disable_allowed(int cpu); - -#endif /* _ASM_IA64_SN_ARCH_H */ diff --git a/include/asm-ia64/sn/bte.h b/include/asm-ia64/sn/bte.h deleted file mode 100644 index a0d214f43115..000000000000 --- a/include/asm-ia64/sn/bte.h +++ /dev/null @@ -1,233 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. - */ - - -#ifndef _ASM_IA64_SN_BTE_H -#define _ASM_IA64_SN_BTE_H - -#include -#include -#include -#include -#include -#include - -#define IBCT_NOTIFY (0x1UL << 4) -#define IBCT_ZFIL_MODE (0x1UL << 0) - -/* #define BTE_DEBUG */ -/* #define BTE_DEBUG_VERBOSE */ - -#ifdef BTE_DEBUG -# define BTE_PRINTK(x) printk x /* Terse */ -# ifdef BTE_DEBUG_VERBOSE -# define BTE_PRINTKV(x) printk x /* Verbose */ -# else -# define BTE_PRINTKV(x) -# endif /* BTE_DEBUG_VERBOSE */ -#else -# define BTE_PRINTK(x) -# define BTE_PRINTKV(x) -#endif /* BTE_DEBUG */ - - -/* BTE status register only supports 16 bits for length field */ -#define BTE_LEN_BITS (16) -#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1) -#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES) - - -/* Define hardware */ -#define BTES_PER_NODE (is_shub2() ? 4 : 2) -#define MAX_BTES_PER_NODE 4 - -#define BTE2OFF_CTRL 0 -#define BTE2OFF_SRC (SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0) -#define BTE2OFF_DEST (SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0) -#define BTE2OFF_NOTIFY (SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0) - -#define BTE_BASE_ADDR(interface) \ - (is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 : \ - (interface == 1) ? SH2_BT_ENG_CSR_1 : \ - (interface == 2) ? SH2_BT_ENG_CSR_2 : \ - SH2_BT_ENG_CSR_3 \ - : (interface == 0) ? IIO_IBLS0 : IIO_IBLS1) - -#define BTE_SOURCE_ADDR(base) \ - (is_shub2() ? base + (BTE2OFF_SRC/8) \ - : base + (BTEOFF_SRC/8)) - -#define BTE_DEST_ADDR(base) \ - (is_shub2() ? base + (BTE2OFF_DEST/8) \ - : base + (BTEOFF_DEST/8)) - -#define BTE_CTRL_ADDR(base) \ - (is_shub2() ? base + (BTE2OFF_CTRL/8) \ - : base + (BTEOFF_CTRL/8)) - -#define BTE_NOTIF_ADDR(base) \ - (is_shub2() ? base + (BTE2OFF_NOTIFY/8) \ - : base + (BTEOFF_NOTIFY/8)) - -/* Define hardware modes */ -#define BTE_NOTIFY IBCT_NOTIFY -#define BTE_NORMAL BTE_NOTIFY -#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE) -/* Use a reserved bit to let the caller specify a wait for any BTE */ -#define BTE_WACQUIRE 0x4000 -/* Use the BTE on the node with the destination memory */ -#define BTE_USE_DEST (BTE_WACQUIRE << 1) -/* Use any available BTE interface on any node for the transfer */ -#define BTE_USE_ANY (BTE_USE_DEST << 1) -/* macro to force the IBCT0 value valid */ -#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE)) - -#define BTE_ACTIVE (IBLS_BUSY | IBLS_ERROR) -#define BTE_WORD_AVAILABLE (IBLS_BUSY << 1) -#define BTE_WORD_BUSY (~BTE_WORD_AVAILABLE) - -/* - * Some macros to simplify reading. - * Start with macros to locate the BTE control registers. - */ -#define BTE_LNSTAT_LOAD(_bte) \ - HUB_L(_bte->bte_base_addr) -#define BTE_LNSTAT_STORE(_bte, _x) \ - HUB_S(_bte->bte_base_addr, (_x)) -#define BTE_SRC_STORE(_bte, _x) \ -({ \ - u64 __addr = ((_x) & ~AS_MASK); \ - if (is_shub2()) \ - __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ - HUB_S(_bte->bte_source_addr, __addr); \ -}) -#define BTE_DEST_STORE(_bte, _x) \ -({ \ - u64 __addr = ((_x) & ~AS_MASK); \ - if (is_shub2()) \ - __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ - HUB_S(_bte->bte_destination_addr, __addr); \ -}) -#define BTE_CTRL_STORE(_bte, _x) \ - HUB_S(_bte->bte_control_addr, (_x)) -#define BTE_NOTIF_STORE(_bte, _x) \ -({ \ - u64 __addr = ia64_tpa((_x) & ~AS_MASK); \ - if (is_shub2()) \ - __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ - HUB_S(_bte->bte_notify_addr, __addr); \ -}) - -#define BTE_START_TRANSFER(_bte, _len, _mode) \ - is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \ - : BTE_LNSTAT_STORE(_bte, _len); \ - BTE_CTRL_STORE(_bte, _mode) - -/* Possible results from bte_copy and bte_unaligned_copy */ -/* The following error codes map into the BTE hardware codes - * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses - * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero - * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error - * codes to give the following error codes. - */ -#define BTEFAIL_OFFSET 1 - -typedef enum { - BTE_SUCCESS, /* 0 is success */ - BTEFAIL_DIR, /* Directory error due to IIO access*/ - BTEFAIL_POISON, /* poison error on IO access (write to poison page) */ - BTEFAIL_WERR, /* Write error (ie WINV to a Read only line) */ - BTEFAIL_ACCESS, /* access error (protection violation) */ - BTEFAIL_PWERR, /* Partial Write Error */ - BTEFAIL_PRERR, /* Partial Read Error */ - BTEFAIL_TOUT, /* CRB Time out */ - BTEFAIL_XTERR, /* Incoming xtalk pkt had error bit */ - BTEFAIL_NOTAVAIL, /* BTE not available */ -} bte_result_t; - -#define BTEFAIL_SH2_RESP_SHORT 0x1 /* bit 000001 */ -#define BTEFAIL_SH2_RESP_LONG 0x2 /* bit 000010 */ -#define BTEFAIL_SH2_RESP_DSP 0x4 /* bit 000100 */ -#define BTEFAIL_SH2_RESP_ACCESS 0x8 /* bit 001000 */ -#define BTEFAIL_SH2_CRB_TO 0x10 /* bit 010000 */ -#define BTEFAIL_SH2_NACK_LIMIT 0x20 /* bit 100000 */ -#define BTEFAIL_SH2_ALL 0x3F /* bit 111111 */ - -#define BTE_ERR_BITS 0x3FUL -#define BTE_ERR_SHIFT 36 -#define BTE_ERR_MASK (BTE_ERR_BITS << BTE_ERR_SHIFT) - -#define BTE_ERROR_RETRY(value) \ - (is_shub2() ? (value != BTEFAIL_SH2_CRB_TO) \ - : (value != BTEFAIL_TOUT)) - -/* - * On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2() - */ -#define BTE_SHUB2_ERROR(_status) \ - ((_status & BTE_ERR_MASK) \ - ? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \ - : _status) - -#define BTE_GET_ERROR_STATUS(_status) \ - (BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR) - -#define BTE_VALID_SH2_ERROR(value) \ - ((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL)) - -/* - * Structure defining a bte. An instance of this - * structure is created in the nodepda for each - * bte on that node (as defined by BTES_PER_NODE) - * This structure contains everything necessary - * to work with a BTE. - */ -struct bteinfo_s { - volatile u64 notify ____cacheline_aligned; - u64 *bte_base_addr ____cacheline_aligned; - u64 *bte_source_addr; - u64 *bte_destination_addr; - u64 *bte_control_addr; - u64 *bte_notify_addr; - spinlock_t spinlock; - cnodeid_t bte_cnode; /* cnode */ - int bte_error_count; /* Number of errors encountered */ - int bte_num; /* 0 --> BTE0, 1 --> BTE1 */ - int cleanup_active; /* Interface is locked for cleanup */ - volatile bte_result_t bh_error; /* error while processing */ - volatile u64 *most_rcnt_na; - struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE]; -}; - - -/* - * Function prototypes (functions defined in bte.c, used elsewhere) - */ -extern bte_result_t bte_copy(u64, u64, u64, u64, void *); -extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64); -extern void bte_error_handler(unsigned long); - -#define bte_zero(dest, len, mode, notification) \ - bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification) - -/* - * The following is the prefered way of calling bte_unaligned_copy - * If the copy is fully cache line aligned, then bte_copy is - * used instead. Since bte_copy is inlined, this saves a call - * stack. NOTE: bte_copy is called synchronously and does block - * until the transfer is complete. In order to get the asynch - * version of bte_copy, you must perform this check yourself. - */ -#define BTE_UNALIGNED_COPY(src, dest, len, mode) \ - (((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) || \ - (dest & L1_CACHE_MASK)) ? \ - bte_unaligned_copy(src, dest, len, mode) : \ - bte_copy(src, dest, len, mode, NULL)) - - -#endif /* _ASM_IA64_SN_BTE_H */ diff --git a/include/asm-ia64/sn/clksupport.h b/include/asm-ia64/sn/clksupport.h deleted file mode 100644 index d340c365a824..000000000000 --- a/include/asm-ia64/sn/clksupport.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. - */ - -/* - * This file contains definitions for accessing a platform supported high resolution - * clock. The clock is monitonically increasing and can be accessed from any node - * in the system. The clock is synchronized across nodes - all nodes see the - * same value. - * - * RTC_COUNTER_ADDR - contains the address of the counter - * - */ - -#ifndef _ASM_IA64_SN_CLKSUPPORT_H -#define _ASM_IA64_SN_CLKSUPPORT_H - -extern unsigned long sn_rtc_cycles_per_second; - -#define RTC_COUNTER_ADDR ((long *)LOCAL_MMR_ADDR(SH_RTC)) - -#define rtc_time() (*RTC_COUNTER_ADDR) - -#endif /* _ASM_IA64_SN_CLKSUPPORT_H */ diff --git a/include/asm-ia64/sn/geo.h b/include/asm-ia64/sn/geo.h deleted file mode 100644 index f083c9434066..000000000000 --- a/include/asm-ia64/sn/geo.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_GEO_H -#define _ASM_IA64_SN_GEO_H - -/* The geoid_t implementation below is based loosely on the pcfg_t - implementation in sys/SN/promcfg.h. */ - -/* Type declaractions */ - -/* Size of a geoid_t structure (must be before decl. of geoid_u) */ -#define GEOID_SIZE 8 /* Would 16 be better? The size can - be different on different platforms. */ - -#define MAX_SLOTS 0xf /* slots per module */ -#define MAX_SLABS 0xf /* slabs per slot */ - -typedef unsigned char geo_type_t; - -/* Fields common to all substructures */ -typedef struct geo_common_s { - moduleid_t module; /* The module (box) this h/w lives in */ - geo_type_t type; /* What type of h/w is named by this geoid_t */ - slabid_t slab:4; /* slab (ASIC), 0 .. 15 within slot */ - slotid_t slot:4; /* slot (Blade), 0 .. 15 within module */ -} geo_common_t; - -/* Additional fields for particular types of hardware */ -typedef struct geo_node_s { - geo_common_t common; /* No additional fields needed */ -} geo_node_t; - -typedef struct geo_rtr_s { - geo_common_t common; /* No additional fields needed */ -} geo_rtr_t; - -typedef struct geo_iocntl_s { - geo_common_t common; /* No additional fields needed */ -} geo_iocntl_t; - -typedef struct geo_pcicard_s { - geo_iocntl_t common; - char bus; /* Bus/widget number */ - char slot; /* PCI slot number */ -} geo_pcicard_t; - -/* Subcomponents of a node */ -typedef struct geo_cpu_s { - geo_node_t node; - char slice; /* Which CPU on the node */ -} geo_cpu_t; - -typedef struct geo_mem_s { - geo_node_t node; - char membus; /* The memory bus on the node */ - char memslot; /* The memory slot on the bus */ -} geo_mem_t; - - -typedef union geoid_u { - geo_common_t common; - geo_node_t node; - geo_iocntl_t iocntl; - geo_pcicard_t pcicard; - geo_rtr_t rtr; - geo_cpu_t cpu; - geo_mem_t mem; - char padsize[GEOID_SIZE]; -} geoid_t; - - -/* Preprocessor macros */ - -#define GEO_MAX_LEN 48 /* max. formatted length, plus some pad: - module/001c07/slab/5/node/memory/2/slot/4 */ - -/* Values for geo_type_t */ -#define GEO_TYPE_INVALID 0 -#define GEO_TYPE_MODULE 1 -#define GEO_TYPE_NODE 2 -#define GEO_TYPE_RTR 3 -#define GEO_TYPE_IOCNTL 4 -#define GEO_TYPE_IOCARD 5 -#define GEO_TYPE_CPU 6 -#define GEO_TYPE_MEM 7 -#define GEO_TYPE_MAX (GEO_TYPE_MEM+1) - -/* Parameter for hwcfg_format_geoid_compt() */ -#define GEO_COMPT_MODULE 1 -#define GEO_COMPT_SLAB 2 -#define GEO_COMPT_IOBUS 3 -#define GEO_COMPT_IOSLOT 4 -#define GEO_COMPT_CPU 5 -#define GEO_COMPT_MEMBUS 6 -#define GEO_COMPT_MEMSLOT 7 - -#define GEO_INVALID_STR "" - -#define INVALID_NASID ((nasid_t)-1) -#define INVALID_CNODEID ((cnodeid_t)-1) -#define INVALID_PNODEID ((pnodeid_t)-1) -#define INVALID_SLAB (slabid_t)-1 -#define INVALID_SLOT (slotid_t)-1 -#define INVALID_MODULE ((moduleid_t)-1) - -static inline slabid_t geo_slab(geoid_t g) -{ - return (g.common.type == GEO_TYPE_INVALID) ? - INVALID_SLAB : g.common.slab; -} - -static inline slotid_t geo_slot(geoid_t g) -{ - return (g.common.type == GEO_TYPE_INVALID) ? - INVALID_SLOT : g.common.slot; -} - -static inline moduleid_t geo_module(geoid_t g) -{ - return (g.common.type == GEO_TYPE_INVALID) ? - INVALID_MODULE : g.common.module; -} - -extern geoid_t cnodeid_get_geoid(cnodeid_t cnode); - -#endif /* _ASM_IA64_SN_GEO_H */ diff --git a/include/asm-ia64/sn/intr.h b/include/asm-ia64/sn/intr.h deleted file mode 100644 index e0487aa97418..000000000000 --- a/include/asm-ia64/sn/intr.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_INTR_H -#define _ASM_IA64_SN_INTR_H - -#include -#include - -#define SGI_UART_VECTOR 0xe9 - -/* Reserved IRQs : Note, not to exceed IA64_SN2_FIRST_DEVICE_VECTOR */ -#define SGI_XPC_ACTIVATE 0x30 -#define SGI_II_ERROR 0x31 -#define SGI_XBOW_ERROR 0x32 -#define SGI_PCIASIC_ERROR 0x33 -#define SGI_ACPI_SCI_INT 0x34 -#define SGI_TIOCA_ERROR 0x35 -#define SGI_TIO_ERROR 0x36 -#define SGI_TIOCX_ERROR 0x37 -#define SGI_MMTIMER_VECTOR 0x38 -#define SGI_XPC_NOTIFY 0xe7 - -#define IA64_SN2_FIRST_DEVICE_VECTOR 0x3c -#define IA64_SN2_LAST_DEVICE_VECTOR 0xe6 - -#define SN2_IRQ_RESERVED 0x1 -#define SN2_IRQ_CONNECTED 0x2 -#define SN2_IRQ_SHARED 0x4 - -// The SN PROM irq struct -struct sn_irq_info { - struct sn_irq_info *irq_next; /* deprecated DO NOT USE */ - short irq_nasid; /* Nasid IRQ is assigned to */ - int irq_slice; /* slice IRQ is assigned to */ - int irq_cpuid; /* kernel logical cpuid */ - int irq_irq; /* the IRQ number */ - int irq_int_bit; /* Bridge interrupt pin */ - /* <0 means MSI */ - u64 irq_xtalkaddr; /* xtalkaddr IRQ is sent to */ - int irq_bridge_type;/* pciio asic type (pciio.h) */ - void *irq_bridge; /* bridge generating irq */ - void *irq_pciioinfo; /* associated pciio_info_t */ - int irq_last_intr; /* For Shub lb lost intr WAR */ - int irq_cookie; /* unique cookie */ - int irq_flags; /* flags */ - int irq_share_cnt; /* num devices sharing IRQ */ - struct list_head list; /* list of sn_irq_info structs */ - struct rcu_head rcu; /* rcu callback list */ -}; - -extern void sn_send_IPI_phys(int, long, int, int); -extern u64 sn_intr_alloc(nasid_t, int, - struct sn_irq_info *, - int, nasid_t, int); -extern void sn_intr_free(nasid_t, int, struct sn_irq_info *); -extern struct sn_irq_info *sn_retarget_vector(struct sn_irq_info *, nasid_t, int); -extern void sn_set_err_irq_affinity(unsigned int); -extern struct list_head **sn_irq_lh; - -#define CPU_VECTOR_TO_IRQ(cpuid,vector) (vector) - -#endif /* _ASM_IA64_SN_INTR_H */ diff --git a/include/asm-ia64/sn/io.h b/include/asm-ia64/sn/io.h deleted file mode 100644 index 41c73a735628..000000000000 --- a/include/asm-ia64/sn/io.h +++ /dev/null @@ -1,274 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_SN_IO_H -#define _ASM_SN_IO_H -#include -#include - -extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */ -extern void __sn_mmiowb(void); /* Forward definition */ - -extern int num_cnodes; - -#define __sn_mf_a() ia64_mfa() - -extern void sn_dma_flush(unsigned long); - -#define __sn_inb ___sn_inb -#define __sn_inw ___sn_inw -#define __sn_inl ___sn_inl -#define __sn_outb ___sn_outb -#define __sn_outw ___sn_outw -#define __sn_outl ___sn_outl -#define __sn_readb ___sn_readb -#define __sn_readw ___sn_readw -#define __sn_readl ___sn_readl -#define __sn_readq ___sn_readq -#define __sn_readb_relaxed ___sn_readb_relaxed -#define __sn_readw_relaxed ___sn_readw_relaxed -#define __sn_readl_relaxed ___sn_readl_relaxed -#define __sn_readq_relaxed ___sn_readq_relaxed - -/* - * Convenience macros for setting/clearing bits using the above accessors - */ - -#define __sn_setq_relaxed(addr, val) \ - writeq((__sn_readq_relaxed(addr) | (val)), (addr)) -#define __sn_clrq_relaxed(addr, val) \ - writeq((__sn_readq_relaxed(addr) & ~(val)), (addr)) - -/* - * The following routines are SN Platform specific, called when - * a reference is made to inX/outX set macros. SN Platform - * inX set of macros ensures that Posted DMA writes on the - * Bridge is flushed. - * - * The routines should be self explainatory. - */ - -static inline unsigned int -___sn_inb (unsigned long port) -{ - volatile unsigned char *addr; - unsigned char ret = -1; - - if ((addr = sn_io_addr(port))) { - ret = *addr; - __sn_mf_a(); - sn_dma_flush((unsigned long)addr); - } - return ret; -} - -static inline unsigned int -___sn_inw (unsigned long port) -{ - volatile unsigned short *addr; - unsigned short ret = -1; - - if ((addr = sn_io_addr(port))) { - ret = *addr; - __sn_mf_a(); - sn_dma_flush((unsigned long)addr); - } - return ret; -} - -static inline unsigned int -___sn_inl (unsigned long port) -{ - volatile unsigned int *addr; - unsigned int ret = -1; - - if ((addr = sn_io_addr(port))) { - ret = *addr; - __sn_mf_a(); - sn_dma_flush((unsigned long)addr); - } - return ret; -} - -static inline void -___sn_outb (unsigned char val, unsigned long port) -{ - volatile unsigned char *addr; - - if ((addr = sn_io_addr(port))) { - *addr = val; - __sn_mmiowb(); - } -} - -static inline void -___sn_outw (unsigned short val, unsigned long port) -{ - volatile unsigned short *addr; - - if ((addr = sn_io_addr(port))) { - *addr = val; - __sn_mmiowb(); - } -} - -static inline void -___sn_outl (unsigned int val, unsigned long port) -{ - volatile unsigned int *addr; - - if ((addr = sn_io_addr(port))) { - *addr = val; - __sn_mmiowb(); - } -} - -/* - * The following routines are SN Platform specific, called when - * a reference is made to readX/writeX set macros. SN Platform - * readX set of macros ensures that Posted DMA writes on the - * Bridge is flushed. - * - * The routines should be self explainatory. - */ - -static inline unsigned char -___sn_readb (const volatile void __iomem *addr) -{ - unsigned char val; - - val = *(volatile unsigned char __force *)addr; - __sn_mf_a(); - sn_dma_flush((unsigned long)addr); - return val; -} - -static inline unsigned short -___sn_readw (const volatile void __iomem *addr) -{ - unsigned short val; - - val = *(volatile unsigned short __force *)addr; - __sn_mf_a(); - sn_dma_flush((unsigned long)addr); - return val; -} - -static inline unsigned int -___sn_readl (const volatile void __iomem *addr) -{ - unsigned int val; - - val = *(volatile unsigned int __force *)addr; - __sn_mf_a(); - sn_dma_flush((unsigned long)addr); - return val; -} - -static inline unsigned long -___sn_readq (const volatile void __iomem *addr) -{ - unsigned long val; - - val = *(volatile unsigned long __force *)addr; - __sn_mf_a(); - sn_dma_flush((unsigned long)addr); - return val; -} - -/* - * For generic and SN2 kernels, we have a set of fast access - * PIO macros. These macros are provided on SN Platform - * because the normal inX and readX macros perform an - * additional task of flushing Post DMA request on the Bridge. - * - * These routines should be self explainatory. - */ - -static inline unsigned int -sn_inb_fast (unsigned long port) -{ - volatile unsigned char *addr = (unsigned char *)port; - unsigned char ret; - - ret = *addr; - __sn_mf_a(); - return ret; -} - -static inline unsigned int -sn_inw_fast (unsigned long port) -{ - volatile unsigned short *addr = (unsigned short *)port; - unsigned short ret; - - ret = *addr; - __sn_mf_a(); - return ret; -} - -static inline unsigned int -sn_inl_fast (unsigned long port) -{ - volatile unsigned int *addr = (unsigned int *)port; - unsigned int ret; - - ret = *addr; - __sn_mf_a(); - return ret; -} - -static inline unsigned char -___sn_readb_relaxed (const volatile void __iomem *addr) -{ - return *(volatile unsigned char __force *)addr; -} - -static inline unsigned short -___sn_readw_relaxed (const volatile void __iomem *addr) -{ - return *(volatile unsigned short __force *)addr; -} - -static inline unsigned int -___sn_readl_relaxed (const volatile void __iomem *addr) -{ - return *(volatile unsigned int __force *) addr; -} - -static inline unsigned long -___sn_readq_relaxed (const volatile void __iomem *addr) -{ - return *(volatile unsigned long __force *) addr; -} - -struct pci_dev; - -static inline int -sn_pci_set_vchan(struct pci_dev *pci_dev, unsigned long *addr, int vchan) -{ - - if (vchan > 1) { - return -1; - } - - if (!(*addr >> 32)) /* Using a mask here would be cleaner */ - return 0; /* but this generates better code */ - - if (vchan == 1) { - /* Set Bit 57 */ - *addr |= (1UL << 57); - } else { - /* Clear Bit 57 */ - *addr &= ~(1UL << 57); - } - - return 0; -} - -#endif /* _ASM_SN_IO_H */ diff --git a/include/asm-ia64/sn/ioc3.h b/include/asm-ia64/sn/ioc3.h deleted file mode 100644 index 95ed6cc83cf1..000000000000 --- a/include/asm-ia64/sn/ioc3.h +++ /dev/null @@ -1,241 +0,0 @@ -/* - * Copyright (C) 2005 Silicon Graphics, Inc. - */ -#ifndef IA64_SN_IOC3_H -#define IA64_SN_IOC3_H - -/* serial port register map */ -struct ioc3_serialregs { - uint32_t sscr; - uint32_t stpir; - uint32_t stcir; - uint32_t srpir; - uint32_t srcir; - uint32_t srtr; - uint32_t shadow; -}; - -/* SUPERIO uart register map */ -struct ioc3_uartregs { - char iu_lcr; - union { - char iir; /* read only */ - char fcr; /* write only */ - } u3; - union { - char ier; /* DLAB == 0 */ - char dlm; /* DLAB == 1 */ - } u2; - union { - char rbr; /* read only, DLAB == 0 */ - char thr; /* write only, DLAB == 0 */ - char dll; /* DLAB == 1 */ - } u1; - char iu_scr; - char iu_msr; - char iu_lsr; - char iu_mcr; -}; - -#define iu_rbr u1.rbr -#define iu_thr u1.thr -#define iu_dll u1.dll -#define iu_ier u2.ier -#define iu_dlm u2.dlm -#define iu_iir u3.iir -#define iu_fcr u3.fcr - -struct ioc3_sioregs { - char fill[0x170]; - struct ioc3_uartregs uartb; - struct ioc3_uartregs uarta; -}; - -/* PCI IO/mem space register map */ -struct ioc3 { - uint32_t pci_id; - uint32_t pci_scr; - uint32_t pci_rev; - uint32_t pci_lat; - uint32_t pci_addr; - uint32_t pci_err_addr_l; - uint32_t pci_err_addr_h; - - uint32_t sio_ir; - /* these registers are read-only for general kernel code. To - * modify them use the functions in ioc3.c - */ - uint32_t sio_ies; - uint32_t sio_iec; - uint32_t sio_cr; - uint32_t int_out; - uint32_t mcr; - uint32_t gpcr_s; - uint32_t gpcr_c; - uint32_t gpdr; - uint32_t gppr[9]; - char fill[0x4c]; - - /* serial port registers */ - uint32_t sbbr_h; - uint32_t sbbr_l; - - struct ioc3_serialregs port_a; - struct ioc3_serialregs port_b; - char fill1[0x1ff10]; - /* superio registers */ - struct ioc3_sioregs sregs; -}; - -/* These don't exist on the ioc3 serial card... */ -#define eier fill1[8] -#define eisr fill1[4] - -#define PCI_LAT 0xc /* Latency Timer */ -#define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */ -#define UARTA_BASE 0x178 -#define UARTB_BASE 0x170 - - -/* bitmasks for serial RX status byte */ -#define RXSB_OVERRUN 0x01 /* char(s) lost */ -#define RXSB_PAR_ERR 0x02 /* parity error */ -#define RXSB_FRAME_ERR 0x04 /* framing error */ -#define RXSB_BREAK 0x08 /* break character */ -#define RXSB_CTS 0x10 /* state of CTS */ -#define RXSB_DCD 0x20 /* state of DCD */ -#define RXSB_MODEM_VALID 0x40 /* DCD, CTS and OVERRUN are valid */ -#define RXSB_DATA_VALID 0x80 /* FRAME_ERR PAR_ERR & BREAK valid */ - -/* bitmasks for serial TX control byte */ -#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */ -#define TXCB_INVALID 0x00 /* byte is invalid */ -#define TXCB_VALID 0x40 /* byte is valid */ -#define TXCB_MCR 0x80 /* data<7:0> to modem cntrl register */ -#define TXCB_DELAY 0xc0 /* delay data<7:0> mSec */ - -/* bitmasks for SBBR_L */ -#define SBBR_L_SIZE 0x00000001 /* 0 1KB rings, 1 4KB rings */ - -/* bitmasks for SSCR_ */ -#define SSCR_RX_THRESHOLD 0x000001ff /* hiwater mark */ -#define SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ -#define SSCR_HFC_EN 0x00020000 /* h/w flow cntrl enabled */ -#define SSCR_RX_RING_DCD 0x00040000 /* postRX record on delta-DCD */ -#define SSCR_RX_RING_CTS 0x00080000 /* postRX record on delta-CTS */ -#define SSCR_HIGH_SPD 0x00100000 /* 4X speed */ -#define SSCR_DIAG 0x00200000 /* bypass clock divider */ -#define SSCR_RX_DRAIN 0x08000000 /* drain RX buffer to memory */ -#define SSCR_DMA_EN 0x10000000 /* enable ring buffer DMA */ -#define SSCR_DMA_PAUSE 0x20000000 /* pause DMA */ -#define SSCR_PAUSE_STATE 0x40000000 /* set when PAUSE takes effect*/ -#define SSCR_RESET 0x80000000 /* reset DMA channels */ - -/* all producer/comsumer pointers are the same bitfield */ -#define PROD_CONS_PTR_4K 0x00000ff8 /* for 4K buffers */ -#define PROD_CONS_PTR_1K 0x000003f8 /* for 1K buffers */ -#define PROD_CONS_PTR_OFF 3 - -/* bitmasks for SRCIR_ */ -#define SRCIR_ARM 0x80000000 /* arm RX timer */ - -/* bitmasks for SHADOW_ */ -#define SHADOW_DR 0x00000001 /* data ready */ -#define SHADOW_OE 0x00000002 /* overrun error */ -#define SHADOW_PE 0x00000004 /* parity error */ -#define SHADOW_FE 0x00000008 /* framing error */ -#define SHADOW_BI 0x00000010 /* break interrupt */ -#define SHADOW_THRE 0x00000020 /* transmit holding reg empty */ -#define SHADOW_TEMT 0x00000040 /* transmit shift reg empty */ -#define SHADOW_RFCE 0x00000080 /* char in RX fifo has error */ -#define SHADOW_DCTS 0x00010000 /* delta clear to send */ -#define SHADOW_DDCD 0x00080000 /* delta data carrier detect */ -#define SHADOW_CTS 0x00100000 /* clear to send */ -#define SHADOW_DCD 0x00800000 /* data carrier detect */ -#define SHADOW_DTR 0x01000000 /* data terminal ready */ -#define SHADOW_RTS 0x02000000 /* request to send */ -#define SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ -#define SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ -#define SHADOW_LOOP 0x10000000 /* loopback enabled */ - -/* bitmasks for SRTR_ */ -#define SRTR_CNT 0x00000fff /* reload value for RX timer */ -#define SRTR_CNT_VAL 0x0fff0000 /* current value of RX timer */ -#define SRTR_CNT_VAL_SHIFT 16 -#define SRTR_HZ 16000 /* SRTR clock frequency */ - -/* bitmasks for SIO_IR, SIO_IEC and SIO_IES */ -#define SIO_IR_SA_TX_MT 0x00000001 /* Serial port A TX empty */ -#define SIO_IR_SA_RX_FULL 0x00000002 /* port A RX buf full */ -#define SIO_IR_SA_RX_HIGH 0x00000004 /* port A RX hiwat */ -#define SIO_IR_SA_RX_TIMER 0x00000008 /* port A RX timeout */ -#define SIO_IR_SA_DELTA_DCD 0x00000010 /* port A delta DCD */ -#define SIO_IR_SA_DELTA_CTS 0x00000020 /* port A delta CTS */ -#define SIO_IR_SA_INT 0x00000040 /* port A pass-thru intr */ -#define SIO_IR_SA_TX_EXPLICIT 0x00000080 /* port A explicit TX thru */ -#define SIO_IR_SA_MEMERR 0x00000100 /* port A PCI error */ -#define SIO_IR_SB_TX_MT 0x00000200 -#define SIO_IR_SB_RX_FULL 0x00000400 -#define SIO_IR_SB_RX_HIGH 0x00000800 -#define SIO_IR_SB_RX_TIMER 0x00001000 -#define SIO_IR_SB_DELTA_DCD 0x00002000 -#define SIO_IR_SB_DELTA_CTS 0x00004000 -#define SIO_IR_SB_INT 0x00008000 -#define SIO_IR_SB_TX_EXPLICIT 0x00010000 -#define SIO_IR_SB_MEMERR 0x00020000 -#define SIO_IR_PP_INT 0x00040000 /* P port pass-thru intr */ -#define SIO_IR_PP_INTA 0x00080000 /* PP context A thru */ -#define SIO_IR_PP_INTB 0x00100000 /* PP context B thru */ -#define SIO_IR_PP_MEMERR 0x00200000 /* PP PCI error */ -#define SIO_IR_KBD_INT 0x00400000 /* kbd/mouse intr */ -#define SIO_IR_RT_INT 0x08000000 /* RT output pulse */ -#define SIO_IR_GEN_INT1 0x10000000 /* RT input pulse */ -#define SIO_IR_GEN_INT_SHIFT 28 - -/* per device interrupt masks */ -#define SIO_IR_SA (SIO_IR_SA_TX_MT | \ - SIO_IR_SA_RX_FULL | \ - SIO_IR_SA_RX_HIGH | \ - SIO_IR_SA_RX_TIMER | \ - SIO_IR_SA_DELTA_DCD | \ - SIO_IR_SA_DELTA_CTS | \ - SIO_IR_SA_INT | \ - SIO_IR_SA_TX_EXPLICIT | \ - SIO_IR_SA_MEMERR) - -#define SIO_IR_SB (SIO_IR_SB_TX_MT | \ - SIO_IR_SB_RX_FULL | \ - SIO_IR_SB_RX_HIGH | \ - SIO_IR_SB_RX_TIMER | \ - SIO_IR_SB_DELTA_DCD | \ - SIO_IR_SB_DELTA_CTS | \ - SIO_IR_SB_INT | \ - SIO_IR_SB_TX_EXPLICIT | \ - SIO_IR_SB_MEMERR) - -#define SIO_IR_PP (SIO_IR_PP_INT | SIO_IR_PP_INTA | \ - SIO_IR_PP_INTB | SIO_IR_PP_MEMERR) -#define SIO_IR_RT (SIO_IR_RT_INT | SIO_IR_GEN_INT1) - -/* bitmasks for SIO_CR */ -#define SIO_CR_CMD_PULSE_SHIFT 15 -#define SIO_CR_SER_A_BASE_SHIFT 1 -#define SIO_CR_SER_B_BASE_SHIFT 8 -#define SIO_CR_ARB_DIAG 0x00380000 /* cur !enet PCI requet (ro) */ -#define SIO_CR_ARB_DIAG_TXA 0x00000000 -#define SIO_CR_ARB_DIAG_RXA 0x00080000 -#define SIO_CR_ARB_DIAG_TXB 0x00100000 -#define SIO_CR_ARB_DIAG_RXB 0x00180000 -#define SIO_CR_ARB_DIAG_PP 0x00200000 -#define SIO_CR_ARB_DIAG_IDLE 0x00400000 /* 0 -> active request (ro) */ - -/* defs for some of the generic I/O pins */ -#define GPCR_PHY_RESET 0x20 /* pin is output to PHY reset */ -#define GPCR_UARTB_MODESEL 0x40 /* pin is output to port B mode sel */ -#define GPCR_UARTA_MODESEL 0x80 /* pin is output to port A mode sel */ - -#define GPPR_PHY_RESET_PIN 5 /* GIO pin controlling phy reset */ -#define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin cntrling uartb modeselect */ -#define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin cntrling uarta modeselect */ - -#endif /* IA64_SN_IOC3_H */ diff --git a/include/asm-ia64/sn/klconfig.h b/include/asm-ia64/sn/klconfig.h deleted file mode 100644 index bcbf209d63be..000000000000 --- a/include/asm-ia64/sn/klconfig.h +++ /dev/null @@ -1,246 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Derived from IRIX . - * - * Copyright (C) 1992-1997,1999,2001-2004 Silicon Graphics, Inc. All Rights Reserved. - * Copyright (C) 1999 by Ralf Baechle - */ -#ifndef _ASM_IA64_SN_KLCONFIG_H -#define _ASM_IA64_SN_KLCONFIG_H - -/* - * The KLCONFIG structures store info about the various BOARDs found - * during Hardware Discovery. In addition, it stores info about the - * components found on the BOARDs. - */ - -typedef s32 klconf_off_t; - - -/* Functions/macros needed to use this structure */ - -typedef struct kl_config_hdr { - char pad[20]; - klconf_off_t ch_board_info; /* the link list of boards */ - char pad0[88]; -} kl_config_hdr_t; - - -#define NODE_OFFSET_TO_LBOARD(nasid,off) (lboard_t*)(GLOBAL_CAC_ADDR((nasid), (off))) - -/* - * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD - * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to - * the LOCAL/current NODE. REMOTE means it is attached to a different - * node.(TBD - Need a way to treat ROUTER boards.) - * - * There are 2 different structures to represent these boards - - * lboard - Local board, rboard - remote board. These 2 structures - * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer - * Figure below). The first byte of the rboard or lboard structure - * is used to find out its type - no unions are used. - * If it is a lboard, then the config info of this board will be found - * on the local node. (LOCAL NODE BASE + offset value gives pointer to - * the structure. - * If it is a rboard, the local structure contains the node number - * and the offset of the beginning of the LINKED LIST on the remote node. - * The details of the hardware on a remote node can be built locally, - * if required, by reading the LINKED LIST on the remote node and - * ignoring all the rboards on that node. - * - * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the - * First board info on the remote node. The remote node list is - * traversed as the local list, using the REMOTE BASE ADDRESS and not - * the local base address and ignoring all rboard values. - * - * - KLCONFIG - - +------------+ +------------+ +------------+ +------------+ - | lboard | +-->| lboard | +-->| rboard | +-->| lboard | - +------------+ | +------------+ | +------------+ | +------------+ - | board info | | | board info | | |errinfo,bptr| | | board info | - +------------+ | +------------+ | +------------+ | +------------+ - | offset |--+ | offset |--+ | offset |--+ |offset=NULL | - +------------+ +------------+ +------------+ +------------+ - - - +------------+ - | board info | - +------------+ +--------------------------------+ - | compt 1 |------>| type, rev, diaginfo, size ... | (CPU) - +------------+ +--------------------------------+ - | compt 2 |--+ - +------------+ | +--------------------------------+ - | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) - +------------+ +--------------------------------+ - | errinfo |--+ - +------------+ | +--------------------------------+ - +--->|r/l brd errinfo,compt err flags | - +--------------------------------+ - - * - * Each BOARD consists of COMPONENTs and the BOARD structure has - * pointers (offsets) to its COMPONENT structure. - * The COMPONENT structure has version info, size and speed info, revision, - * error info and the NIC info. This structure can accommodate any - * BOARD with arbitrary COMPONENT composition. - * - * The ERRORINFO part of each BOARD has error information - * that describes errors about the BOARD itself. It also has flags to - * indicate the COMPONENT(s) on the board that have errors. The error - * information specific to the COMPONENT is present in the respective - * COMPONENT structure. - * - * The ERRORINFO structure is also treated like a COMPONENT, ie. the - * BOARD has pointers(offset) to the ERRORINFO structure. The rboard - * structure also has a pointer to the ERRORINFO structure. This is - * the place to store ERRORINFO about a REMOTE NODE, if the HUB on - * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where - * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can - * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info - * which is present on the REMOTE NODE.(TBD) - * REMOTE ERRINFO can be stored on any of the nearest nodes - * or on all the nearest nodes.(TBD) - * Like BOARD structures, REMOTE ERRINFO structures can be built locally - * using the rboard errinfo pointer. - * - * In order to get useful information from this Data organization, a set of - * interface routines are provided (TBD). The important thing to remember while - * manipulating the structures, is that, the NODE number information should - * be used. If the NODE is non-zero (remote) then each offset should - * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. - * This includes offsets for BOARDS, COMPONENTS and ERRORINFO. - * - * Note that these structures do not provide much info about connectivity. - * That info will be part of HWGRAPH, which is an extension of the cfg_t - * data structure. (ref IP27prom/cfg.h) It has to be extended to include - * the IO part of the Network(TBD). - * - * The data structures below define the above concepts. - */ - - -/* - * BOARD classes - */ - -#define KLCLASS_MASK 0xf0 -#define KLCLASS_NONE 0x00 -#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ -#define KLCLASS_CPU KLCLASS_NODE -#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI - and the non-graphics widget boards */ -#define KLCLASS_ROUTER 0x30 /* Router board */ -#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board - so that we can record error info */ -#define KLCLASS_IOBRICK 0x70 /* IP35 iobrick */ -#define KLCLASS_MAX 8 /* Bump this if a new CLASS is added */ - -#define KLCLASS(_x) ((_x) & KLCLASS_MASK) - - -/* - * board types - */ - -#define KLTYPE_MASK 0x0f -#define KLTYPE(_x) ((_x) & KLTYPE_MASK) - -#define KLTYPE_SNIA (KLCLASS_CPU | 0x1) -#define KLTYPE_TIO (KLCLASS_CPU | 0x2) - -#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) -#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3) -#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4) - -#define KLTYPE_IOBRICK_XBOW (KLCLASS_MIDPLANE | 0x2) - -#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0) -#define KLTYPE_NBRICK (KLCLASS_IOBRICK | 0x4) -#define KLTYPE_PXBRICK (KLCLASS_IOBRICK | 0x6) -#define KLTYPE_IXBRICK (KLCLASS_IOBRICK | 0x7) -#define KLTYPE_CGBRICK (KLCLASS_IOBRICK | 0x8) -#define KLTYPE_OPUSBRICK (KLCLASS_IOBRICK | 0x9) -#define KLTYPE_SABRICK (KLCLASS_IOBRICK | 0xa) -#define KLTYPE_IABRICK (KLCLASS_IOBRICK | 0xb) -#define KLTYPE_PABRICK (KLCLASS_IOBRICK | 0xc) -#define KLTYPE_GABRICK (KLCLASS_IOBRICK | 0xd) - - -/* - * board structures - */ - -#define MAX_COMPTS_PER_BRD 24 - -typedef struct lboard_s { - klconf_off_t brd_next_any; /* Next BOARD */ - unsigned char struct_type; /* type of structure, local or remote */ - unsigned char brd_type; /* type+class */ - unsigned char brd_sversion; /* version of this structure */ - unsigned char brd_brevision; /* board revision */ - unsigned char brd_promver; /* board prom version, if any */ - unsigned char brd_flags; /* Enabled, Disabled etc */ - unsigned char brd_slot; /* slot number */ - unsigned short brd_debugsw; /* Debug switches */ - geoid_t brd_geoid; /* geo id */ - partid_t brd_partition; /* Partition number */ - unsigned short brd_diagval; /* diagnostic value */ - unsigned short brd_diagparm; /* diagnostic parameter */ - unsigned char brd_inventory; /* inventory history */ - unsigned char brd_numcompts; /* Number of components */ - nic_t brd_nic; /* Number in CAN */ - nasid_t brd_nasid; /* passed parameter */ - klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ - klconf_off_t brd_errinfo; /* Board's error information */ - struct lboard_s *brd_parent; /* Logical parent for this brd */ - char pad0[4]; - unsigned char brd_confidence; /* confidence that the board is bad */ - nasid_t brd_owner; /* who owns this board */ - unsigned char brd_nic_flags; /* To handle 8 more NICs */ - char pad1[24]; /* future expansion */ - char brd_name[32]; - nasid_t brd_next_same_host; /* host of next brd w/same nasid */ - klconf_off_t brd_next_same; /* Next BOARD with same nasid */ -} lboard_t; - -/* - * Generic info structure. This stores common info about a - * component. - */ - -typedef struct klinfo_s { /* Generic info */ - unsigned char struct_type; /* type of this structure */ - unsigned char struct_version; /* version of this structure */ - unsigned char flags; /* Enabled, disabled etc */ - unsigned char revision; /* component revision */ - unsigned short diagval; /* result of diagnostics */ - unsigned short diagparm; /* diagnostic parameter */ - unsigned char inventory; /* previous inventory status */ - unsigned short partid; /* widget part number */ - nic_t nic; /* MUst be aligned properly */ - unsigned char physid; /* physical id of component */ - unsigned int virtid; /* virtual id as seen by system */ - unsigned char widid; /* Widget id - if applicable */ - nasid_t nasid; /* node number - from parent */ - char pad1; /* pad out structure. */ - char pad2; /* pad out structure. */ - void *data; - klconf_off_t errinfo; /* component specific errors */ - unsigned short pad3; /* pci fields have moved over to */ - unsigned short pad4; /* klbri_t */ -} klinfo_t ; - - -static inline lboard_t *find_lboard_next(lboard_t * brd) -{ - if (brd && brd->brd_next_any) - return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any); - return NULL; -} - -#endif /* _ASM_IA64_SN_KLCONFIG_H */ diff --git a/include/asm-ia64/sn/l1.h b/include/asm-ia64/sn/l1.h deleted file mode 100644 index 344bf44bb356..000000000000 --- a/include/asm-ia64/sn/l1.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992-1997,2000-2004 Silicon Graphics, Inc. All Rights Reserved. - */ - -#ifndef _ASM_IA64_SN_L1_H -#define _ASM_IA64_SN_L1_H - -/* brick type response codes */ -#define L1_BRICKTYPE_PX 0x23 /* # */ -#define L1_BRICKTYPE_PE 0x25 /* % */ -#define L1_BRICKTYPE_N_p0 0x26 /* & */ -#define L1_BRICKTYPE_IP45 0x34 /* 4 */ -#define L1_BRICKTYPE_IP41 0x35 /* 5 */ -#define L1_BRICKTYPE_TWISTER 0x36 /* 6 */ /* IP53 & ROUTER */ -#define L1_BRICKTYPE_IX 0x3d /* = */ -#define L1_BRICKTYPE_IP34 0x61 /* a */ -#define L1_BRICKTYPE_GA 0x62 /* b */ -#define L1_BRICKTYPE_C 0x63 /* c */ -#define L1_BRICKTYPE_OPUS_TIO 0x66 /* f */ -#define L1_BRICKTYPE_I 0x69 /* i */ -#define L1_BRICKTYPE_N 0x6e /* n */ -#define L1_BRICKTYPE_OPUS 0x6f /* o */ -#define L1_BRICKTYPE_P 0x70 /* p */ -#define L1_BRICKTYPE_R 0x72 /* r */ -#define L1_BRICKTYPE_CHI_CG 0x76 /* v */ -#define L1_BRICKTYPE_X 0x78 /* x */ -#define L1_BRICKTYPE_X2 0x79 /* y */ -#define L1_BRICKTYPE_SA 0x5e /* ^ */ -#define L1_BRICKTYPE_PA 0x6a /* j */ -#define L1_BRICKTYPE_IA 0x6b /* k */ -#define L1_BRICKTYPE_ATHENA 0x2b /* + */ -#define L1_BRICKTYPE_DAYTONA 0x7a /* z */ -#define L1_BRICKTYPE_1932 0x2c /* . */ -#define L1_BRICKTYPE_191010 0x2e /* , */ - -/* board type response codes */ -#define L1_BOARDTYPE_IP69 0x0100 /* CA */ -#define L1_BOARDTYPE_IP63 0x0200 /* CB */ -#define L1_BOARDTYPE_BASEIO 0x0300 /* IB */ -#define L1_BOARDTYPE_PCIE2SLOT 0x0400 /* IC */ -#define L1_BOARDTYPE_PCIX3SLOT 0x0500 /* ID */ -#define L1_BOARDTYPE_PCIXPCIE4SLOT 0x0600 /* IE */ -#define L1_BOARDTYPE_ABACUS 0x0700 /* AB */ -#define L1_BOARDTYPE_DAYTONA 0x0800 /* AD */ -#define L1_BOARDTYPE_INVAL (-1) /* invalid brick type */ - -#endif /* _ASM_IA64_SN_L1_H */ diff --git a/include/asm-ia64/sn/leds.h b/include/asm-ia64/sn/leds.h deleted file mode 100644 index 66cf8c4d92c9..000000000000 --- a/include/asm-ia64/sn/leds.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_LEDS_H -#define _ASM_IA64_SN_LEDS_H - -#include -#include -#include - -#define LED0 (LOCAL_MMR_ADDR(SH_REAL_JUNK_BUS_LED0)) -#define LED_CPU_SHIFT 16 - -#define LED_CPU_HEARTBEAT 0x01 -#define LED_CPU_ACTIVITY 0x02 -#define LED_ALWAYS_SET 0x00 - -/* - * Basic macros for flashing the LEDS on an SGI SN. - */ - -static __inline__ void -set_led_bits(u8 value, u8 mask) -{ - pda->led_state = (pda->led_state & ~mask) | (value & mask); - *pda->led_address = (short) pda->led_state; -} - -#endif /* _ASM_IA64_SN_LEDS_H */ - diff --git a/include/asm-ia64/sn/module.h b/include/asm-ia64/sn/module.h deleted file mode 100644 index 734e980ece2f..000000000000 --- a/include/asm-ia64/sn/module.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_MODULE_H -#define _ASM_IA64_SN_MODULE_H - -/* parameter for format_module_id() */ -#define MODULE_FORMAT_BRIEF 1 -#define MODULE_FORMAT_LONG 2 -#define MODULE_FORMAT_LCD 3 - -/* - * Module id format - * - * 31-16 Rack ID (encoded class, group, number - 16-bit unsigned int) - * 15-8 Brick type (8-bit ascii character) - * 7-0 Bay (brick position in rack (0-63) - 8-bit unsigned int) - * - */ - -/* - * Macros for getting the brick type - */ -#define MODULE_BTYPE_MASK 0xff00 -#define MODULE_BTYPE_SHFT 8 -#define MODULE_GET_BTYPE(_m) (((_m) & MODULE_BTYPE_MASK) >> MODULE_BTYPE_SHFT) -#define MODULE_BT_TO_CHAR(_b) ((char)(_b)) -#define MODULE_GET_BTCHAR(_m) (MODULE_BT_TO_CHAR(MODULE_GET_BTYPE(_m))) - -/* - * Macros for getting the rack ID. - */ -#define MODULE_RACK_MASK 0xffff0000 -#define MODULE_RACK_SHFT 16 -#define MODULE_GET_RACK(_m) (((_m) & MODULE_RACK_MASK) >> MODULE_RACK_SHFT) - -/* - * Macros for getting the brick position - */ -#define MODULE_BPOS_MASK 0x00ff -#define MODULE_BPOS_SHFT 0 -#define MODULE_GET_BPOS(_m) (((_m) & MODULE_BPOS_MASK) >> MODULE_BPOS_SHFT) - -/* - * Macros for encoding and decoding rack IDs - * A rack number consists of three parts: - * class (0==CPU/mixed, 1==I/O), group, number - * - * Rack number is stored just as it is displayed on the screen: - * a 3-decimal-digit number. - */ -#define RACK_CLASS_DVDR 100 -#define RACK_GROUP_DVDR 10 -#define RACK_NUM_DVDR 1 - -#define RACK_CREATE_RACKID(_c, _g, _n) ((_c) * RACK_CLASS_DVDR + \ - (_g) * RACK_GROUP_DVDR + (_n) * RACK_NUM_DVDR) - -#define RACK_GET_CLASS(_r) ((_r) / RACK_CLASS_DVDR) -#define RACK_GET_GROUP(_r) (((_r) - RACK_GET_CLASS(_r) * \ - RACK_CLASS_DVDR) / RACK_GROUP_DVDR) -#define RACK_GET_NUM(_r) (((_r) - RACK_GET_CLASS(_r) * \ - RACK_CLASS_DVDR - RACK_GET_GROUP(_r) * \ - RACK_GROUP_DVDR) / RACK_NUM_DVDR) - -/* - * Macros for encoding and decoding rack IDs - * A rack number consists of three parts: - * class 1 bit, 0==CPU/mixed, 1==I/O - * group 2 bits for CPU/mixed, 3 bits for I/O - * number 3 bits for CPU/mixed, 2 bits for I/O (1 based) - */ -#define RACK_GROUP_BITS(_r) (RACK_GET_CLASS(_r) ? 3 : 2) -#define RACK_NUM_BITS(_r) (RACK_GET_CLASS(_r) ? 2 : 3) - -#define RACK_CLASS_MASK(_r) 0x20 -#define RACK_CLASS_SHFT(_r) 5 -#define RACK_ADD_CLASS(_r, _c) \ - ((_r) |= (_c) << RACK_CLASS_SHFT(_r) & RACK_CLASS_MASK(_r)) - -#define RACK_GROUP_SHFT(_r) RACK_NUM_BITS(_r) -#define RACK_GROUP_MASK(_r) \ - ( (((unsigned)1< -#include -#include -#include - -/* - * NUMA Node-Specific Data structures are defined in this file. - * In particular, this is the location of the node PDA. - * A pointer to the right node PDA is saved in each CPU PDA. - */ - -/* - * Node-specific data structure. - * - * One of these structures is allocated on each node of a NUMA system. - * - * This structure provides a convenient way of keeping together - * all per-node data structures. - */ -struct phys_cpuid { - short nasid; - char subnode; - char slice; -}; - -struct nodepda_s { - void *pdinfo; /* Platform-dependent per-node info */ - - /* - * The BTEs on this node are shared by the local cpus - */ - struct bteinfo_s bte_if[MAX_BTES_PER_NODE]; /* Virtual Interface */ - struct timer_list bte_recovery_timer; - spinlock_t bte_recovery_lock; - - /* - * Array of pointers to the nodepdas for each node. - */ - struct nodepda_s *pernode_pdaindr[MAX_COMPACT_NODES]; - - /* - * Array of physical cpu identifiers. Indexed by cpuid. - */ - struct phys_cpuid phys_cpuid[NR_CPUS]; - spinlock_t ptc_lock ____cacheline_aligned_in_smp; -}; - -typedef struct nodepda_s nodepda_t; - -/* - * Access Functions for node PDA. - * Since there is one nodepda for each node, we need a convenient mechanism - * to access these nodepdas without cluttering code with #ifdefs. - * The next set of definitions provides this. - * Routines are expected to use - * - * sn_nodepda - to access node PDA for the node on which code is running - * NODEPDA(cnodeid) - to access node PDA for cnodeid - */ - -DECLARE_PER_CPU(struct nodepda_s *, __sn_nodepda); -#define sn_nodepda (__get_cpu_var(__sn_nodepda)) -#define NODEPDA(cnodeid) (sn_nodepda->pernode_pdaindr[cnodeid]) - -/* - * Check if given a compact node id the corresponding node has all the - * cpus disabled. - */ -#define is_headless_node(cnodeid) (nr_cpus_node(cnodeid) == 0) - -#endif /* _ASM_IA64_SN_NODEPDA_H */ diff --git a/include/asm-ia64/sn/pcibr_provider.h b/include/asm-ia64/sn/pcibr_provider.h deleted file mode 100644 index da205b7cdaac..000000000000 --- a/include/asm-ia64/sn/pcibr_provider.h +++ /dev/null @@ -1,150 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992-1997,2000-2006 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H -#define _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H - -#include -#include - -/* Workarounds */ -#define PV907516 (1 << 1) /* TIOCP: Don't write the write buffer flush reg */ - -#define BUSTYPE_MASK 0x1 - -/* Macros given a pcibus structure */ -#define IS_PCIX(ps) ((ps)->pbi_bridge_mode & BUSTYPE_MASK) -#define IS_PCI_BRIDGE_ASIC(asic) (asic == PCIIO_ASIC_TYPE_PIC || \ - asic == PCIIO_ASIC_TYPE_TIOCP) -#define IS_PIC_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_PIC) -#define IS_TIOCP_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_TIOCP) - - -/* - * The different PCI Bridge types supported on the SGI Altix platforms - */ -#define PCIBR_BRIDGETYPE_UNKNOWN -1 -#define PCIBR_BRIDGETYPE_PIC 2 -#define PCIBR_BRIDGETYPE_TIOCP 3 - -/* - * Bridge 64bit Direct Map Attributes - */ -#define PCI64_ATTR_PREF (1ull << 59) -#define PCI64_ATTR_PREC (1ull << 58) -#define PCI64_ATTR_VIRTUAL (1ull << 57) -#define PCI64_ATTR_BAR (1ull << 56) -#define PCI64_ATTR_SWAP (1ull << 55) -#define PCI64_ATTR_VIRTUAL1 (1ull << 54) - -#define PCI32_LOCAL_BASE 0 -#define PCI32_MAPPED_BASE 0x40000000 -#define PCI32_DIRECT_BASE 0x80000000 - -#define IS_PCI32_MAPPED(x) ((u64)(x) < PCI32_DIRECT_BASE && \ - (u64)(x) >= PCI32_MAPPED_BASE) -#define IS_PCI32_DIRECT(x) ((u64)(x) >= PCI32_MAPPED_BASE) - - -/* - * Bridge PMU Address Transaltion Entry Attibutes - */ -#define PCI32_ATE_V (0x1 << 0) -#define PCI32_ATE_CO (0x1 << 1) /* PIC ASIC ONLY */ -#define PCI32_ATE_PIO (0x1 << 1) /* TIOCP ASIC ONLY */ -#define PCI32_ATE_MSI (0x1 << 2) -#define PCI32_ATE_PREF (0x1 << 3) -#define PCI32_ATE_BAR (0x1 << 4) -#define PCI32_ATE_ADDR_SHFT 12 - -#define MINIMAL_ATES_REQUIRED(addr, size) \ - (IOPG(IOPGOFF(addr) + (size) - 1) == IOPG((size) - 1)) - -#define MINIMAL_ATE_FLAG(addr, size) \ - (MINIMAL_ATES_REQUIRED((u64)addr, size) ? 1 : 0) - -/* bit 29 of the pci address is the SWAP bit */ -#define ATE_SWAPSHIFT 29 -#define ATE_SWAP_ON(x) ((x) |= (1 << ATE_SWAPSHIFT)) -#define ATE_SWAP_OFF(x) ((x) &= ~(1 << ATE_SWAPSHIFT)) - -/* - * I/O page size - */ -#if PAGE_SIZE < 16384 -#define IOPFNSHIFT 12 /* 4K per mapped page */ -#else -#define IOPFNSHIFT 14 /* 16K per mapped page */ -#endif - -#define IOPGSIZE (1 << IOPFNSHIFT) -#define IOPG(x) ((x) >> IOPFNSHIFT) -#define IOPGOFF(x) ((x) & (IOPGSIZE-1)) - -#define PCIBR_DEV_SWAP_DIR (1ull << 19) -#define PCIBR_CTRL_PAGE_SIZE (0x1 << 21) - -/* - * PMU resources. - */ -struct ate_resource{ - u64 *ate; - u64 num_ate; - u64 lowest_free_index; -}; - -struct pcibus_info { - struct pcibus_bussoft pbi_buscommon; /* common header */ - u32 pbi_moduleid; - short pbi_bridge_type; - short pbi_bridge_mode; - - struct ate_resource pbi_int_ate_resource; - u64 pbi_int_ate_size; - - u64 pbi_dir_xbase; - char pbi_hub_xid; - - u64 pbi_devreg[8]; - - u32 pbi_valid_devices; - u32 pbi_enabled_devices; - - spinlock_t pbi_lock; -}; - -extern int pcibr_init_provider(void); -extern void *pcibr_bus_fixup(struct pcibus_bussoft *, struct pci_controller *); -extern dma_addr_t pcibr_dma_map(struct pci_dev *, unsigned long, size_t, int type); -extern dma_addr_t pcibr_dma_map_consistent(struct pci_dev *, unsigned long, size_t, int type); -extern void pcibr_dma_unmap(struct pci_dev *, dma_addr_t, int); - -/* - * prototypes for the bridge asic register access routines in pcibr_reg.c - */ -extern void pcireg_control_bit_clr(struct pcibus_info *, u64); -extern void pcireg_control_bit_set(struct pcibus_info *, u64); -extern u64 pcireg_tflush_get(struct pcibus_info *); -extern u64 pcireg_intr_status_get(struct pcibus_info *); -extern void pcireg_intr_enable_bit_clr(struct pcibus_info *, u64); -extern void pcireg_intr_enable_bit_set(struct pcibus_info *, u64); -extern void pcireg_intr_addr_addr_set(struct pcibus_info *, int, u64); -extern void pcireg_force_intr_set(struct pcibus_info *, int); -extern u64 pcireg_wrb_flush_get(struct pcibus_info *, int); -extern void pcireg_int_ate_set(struct pcibus_info *, int, u64); -extern u64 __iomem * pcireg_int_ate_addr(struct pcibus_info *, int); -extern void pcibr_force_interrupt(struct sn_irq_info *sn_irq_info); -extern void pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info); -extern int pcibr_ate_alloc(struct pcibus_info *, int); -extern void pcibr_ate_free(struct pcibus_info *, int); -extern void ate_write(struct pcibus_info *, int, int, u64); -extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device, - void *resp, char **ssdt); -extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device, - int action, void *resp); -extern u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus); -#endif diff --git a/include/asm-ia64/sn/pcibus_provider_defs.h b/include/asm-ia64/sn/pcibus_provider_defs.h deleted file mode 100644 index 8f7c83d0f6d3..000000000000 --- a/include/asm-ia64/sn/pcibus_provider_defs.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H -#define _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H - -/* - * SN pci asic types. Do not ever renumber these or reuse values. The - * values must agree with what prom thinks they are. - */ - -#define PCIIO_ASIC_TYPE_UNKNOWN 0 -#define PCIIO_ASIC_TYPE_PPB 1 -#define PCIIO_ASIC_TYPE_PIC 2 -#define PCIIO_ASIC_TYPE_TIOCP 3 -#define PCIIO_ASIC_TYPE_TIOCA 4 -#define PCIIO_ASIC_TYPE_TIOCE 5 - -#define PCIIO_ASIC_MAX_TYPES 6 - -/* - * Common pciio bus provider data. There should be one of these as the - * first field in any pciio based provider soft structure (e.g. pcibr_soft - * tioca_soft, etc). - */ - -struct pcibus_bussoft { - u32 bs_asic_type; /* chipset type */ - u32 bs_xid; /* xwidget id */ - u32 bs_persist_busnum; /* Persistent Bus Number */ - u32 bs_persist_segment; /* Segment Number */ - u64 bs_legacy_io; /* legacy io pio addr */ - u64 bs_legacy_mem; /* legacy mem pio addr */ - u64 bs_base; /* widget base */ - struct xwidget_info *bs_xwidget_info; -}; - -struct pci_controller; -/* - * SN pci bus indirection - */ - -struct sn_pcibus_provider { - dma_addr_t (*dma_map)(struct pci_dev *, unsigned long, size_t, int flags); - dma_addr_t (*dma_map_consistent)(struct pci_dev *, unsigned long, size_t, int flags); - void (*dma_unmap)(struct pci_dev *, dma_addr_t, int); - void * (*bus_fixup)(struct pcibus_bussoft *, struct pci_controller *); - void (*force_interrupt)(struct sn_irq_info *); - void (*target_interrupt)(struct sn_irq_info *); -}; - -/* - * Flags used by the map interfaces - * bits 3:0 specifies format of passed in address - * bit 4 specifies that address is to be used for MSI - */ - -#define SN_DMA_ADDRTYPE(x) ((x) & 0xf) -#define SN_DMA_ADDR_PHYS 1 /* address is an xio address. */ -#define SN_DMA_ADDR_XIO 2 /* address is phys memory */ -#define SN_DMA_MSI 0x10 /* Bus address is to be used for MSI */ - -extern struct sn_pcibus_provider *sn_pci_provider[]; -#endif /* _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H */ diff --git a/include/asm-ia64/sn/pcidev.h b/include/asm-ia64/sn/pcidev.h deleted file mode 100644 index 1c2382cea807..000000000000 --- a/include/asm-ia64/sn/pcidev.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_PCI_PCIDEV_H -#define _ASM_IA64_SN_PCI_PCIDEV_H - -#include - -/* - * In ia64, pci_dev->sysdata must be a *pci_controller. To provide access to - * the pcidev_info structs for all devices under a controller, we keep a - * list of pcidev_info under pci_controller->platform_data. - */ -struct sn_platform_data { - void *provider_soft; - struct list_head pcidev_info; -}; - -#define SN_PLATFORM_DATA(busdev) \ - ((struct sn_platform_data *)(PCI_CONTROLLER(busdev)->platform_data)) - -#define SN_PCIDEV_INFO(dev) sn_pcidev_info_get(dev) - -/* - * Given a pci_bus, return the sn pcibus_bussoft struct. Note that - * this only works for root busses, not for busses represented by PPB's. - */ - -#define SN_PCIBUS_BUSSOFT(pci_bus) \ - ((struct pcibus_bussoft *)(SN_PLATFORM_DATA(pci_bus)->provider_soft)) - -#define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \ - ((struct pcibus_info *)(SN_PLATFORM_DATA(pci_bus)->provider_soft)) -/* - * Given a struct pci_dev, return the sn pcibus_bussoft struct. Note - * that this is not equivalent to SN_PCIBUS_BUSSOFT(pci_dev->bus) due - * due to possible PPB's in the path. - */ - -#define SN_PCIDEV_BUSSOFT(pci_dev) \ - (SN_PCIDEV_INFO(pci_dev)->pdi_host_pcidev_info->pdi_pcibus_info) - -#define SN_PCIDEV_BUSPROVIDER(pci_dev) \ - (SN_PCIDEV_INFO(pci_dev)->pdi_provider) - -#define PCIIO_BUS_NONE 255 /* bus 255 reserved */ -#define PCIIO_SLOT_NONE 255 -#define PCIIO_FUNC_NONE 255 -#define PCIIO_VENDOR_ID_NONE (-1) - -struct pcidev_info { - u64 pdi_pio_mapped_addr[7]; /* 6 BARs PLUS 1 ROM */ - u64 pdi_slot_host_handle; /* Bus and devfn Host pci_dev */ - - struct pcibus_bussoft *pdi_pcibus_info; /* Kernel common bus soft */ - struct pcidev_info *pdi_host_pcidev_info; /* Kernel Host pci_dev */ - struct pci_dev *pdi_linux_pcidev; /* Kernel pci_dev */ - - struct sn_irq_info *pdi_sn_irq_info; - struct sn_pcibus_provider *pdi_provider; /* sn pci ops */ - struct pci_dev *host_pci_dev; /* host bus link */ - struct list_head pdi_list; /* List of pcidev_info */ -}; - -extern void sn_irq_fixup(struct pci_dev *pci_dev, - struct sn_irq_info *sn_irq_info); -extern void sn_irq_unfixup(struct pci_dev *pci_dev); -extern struct pcidev_info * sn_pcidev_info_get(struct pci_dev *); -extern void sn_bus_fixup(struct pci_bus *); -extern void sn_acpi_bus_fixup(struct pci_bus *); -extern void sn_common_bus_fixup(struct pci_bus *, struct pcibus_bussoft *); -extern void sn_bus_store_sysdata(struct pci_dev *dev); -extern void sn_bus_free_sysdata(void); -extern void sn_generate_path(struct pci_bus *pci_bus, char *address); -extern void sn_io_slot_fixup(struct pci_dev *); -extern void sn_acpi_slot_fixup(struct pci_dev *); -extern void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *, - struct sn_irq_info *); -extern void sn_pci_unfixup_slot(struct pci_dev *dev); -extern void sn_irq_lh_init(void); -#endif /* _ASM_IA64_SN_PCI_PCIDEV_H */ diff --git a/include/asm-ia64/sn/pda.h b/include/asm-ia64/sn/pda.h deleted file mode 100644 index 1c5108d44d8b..000000000000 --- a/include/asm-ia64/sn/pda.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_PDA_H -#define _ASM_IA64_SN_PDA_H - -#include -#include -#include - - -/* - * CPU-specific data structure. - * - * One of these structures is allocated for each cpu of a NUMA system. - * - * This structure provides a convenient way of keeping together - * all SN per-cpu data structures. - */ - -typedef struct pda_s { - - /* - * Support for SN LEDs - */ - volatile short *led_address; - u8 led_state; - u8 hb_state; /* supports blinking heartbeat leds */ - unsigned int hb_count; - - unsigned int idle_flag; - - volatile unsigned long *bedrock_rev_id; - volatile unsigned long *pio_write_status_addr; - unsigned long pio_write_status_val; - volatile unsigned long *pio_shub_war_cam_addr; - - unsigned long sn_in_service_ivecs[4]; - int sn_lb_int_war_ticks; - int sn_last_irq; - int sn_first_irq; -} pda_t; - - -#define CACHE_ALIGN(x) (((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1)) - -/* - * PDA - * Per-cpu private data area for each cpu. The PDA is located immediately after - * the IA64 cpu_data area. A full page is allocated for the cp_data area for each - * cpu but only a small amout of the page is actually used. We put the SNIA PDA - * in the same page as the cpu_data area. Note that there is a check in the setup - * code to verify that we don't overflow the page. - * - * Seems like we should should cache-line align the pda so that any changes in the - * size of the cpu_data area don't change cache layout. Should we align to 32, 64, 128 - * or 512 boundary. Each has merits. For now, pick 128 but should be revisited later. - */ -DECLARE_PER_CPU(struct pda_s, pda_percpu); - -#define pda (&__ia64_per_cpu_var(pda_percpu)) - -#define pdacpu(cpu) (&per_cpu(pda_percpu, cpu)) - -#endif /* _ASM_IA64_SN_PDA_H */ diff --git a/include/asm-ia64/sn/pic.h b/include/asm-ia64/sn/pic.h deleted file mode 100644 index 5f9da5fd6e56..000000000000 --- a/include/asm-ia64/sn/pic.h +++ /dev/null @@ -1,261 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2003 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_PCI_PIC_H -#define _ASM_IA64_SN_PCI_PIC_H - -/* - * PIC AS DEVICE ZERO - * ------------------ - * - * PIC handles PCI/X busses. PCI/X requires that the 'bridge' (i.e. PIC) - * be designated as 'device 0'. That is a departure from earlier SGI - * PCI bridges. Because of that we use config space 1 to access the - * config space of the first actual PCI device on the bus. - * Here's what the PIC manual says: - * - * The current PCI-X bus specification now defines that the parent - * hosts bus bridge (PIC for example) must be device 0 on bus 0. PIC - * reduced the total number of devices from 8 to 4 and removed the - * device registers and windows, now only supporting devices 0,1,2, and - * 3. PIC did leave all 8 configuration space windows. The reason was - * there was nothing to gain by removing them. Here in lies the problem. - * The device numbering we do using 0 through 3 is unrelated to the device - * numbering which PCI-X requires in configuration space. In the past we - * correlated Configs pace and our device space 0 <-> 0, 1 <-> 1, etc. - * PCI-X requires we start a 1, not 0 and currently the PX brick - * does associate our: - * - * device 0 with configuration space window 1, - * device 1 with configuration space window 2, - * device 2 with configuration space window 3, - * device 3 with configuration space window 4. - * - * The net effect is that all config space access are off-by-one with - * relation to other per-slot accesses on the PIC. - * Here is a table that shows some of that: - * - * Internal Slot# - * | - * | 0 1 2 3 - * ----------|--------------------------------------- - * config | 0x21000 0x22000 0x23000 0x24000 - * | - * even rrb | 0[0] n/a 1[0] n/a [] == implied even/odd - * | - * odd rrb | n/a 0[1] n/a 1[1] - * | - * int dev | 00 01 10 11 - * | - * ext slot# | 1 2 3 4 - * ----------|--------------------------------------- - */ - -#define PIC_ATE_TARGETID_SHFT 8 -#define PIC_HOST_INTR_ADDR 0x0000FFFFFFFFFFFFUL -#define PIC_PCI64_ATTR_TARG_SHFT 60 - - -/***************************************************************************** - *********************** PIC MMR structure mapping *************************** - *****************************************************************************/ - -/* NOTE: PIC WAR. PV#854697. PIC does not allow writes just to [31:0] - * of a 64-bit register. When writing PIC registers, always write the - * entire 64 bits. - */ - -struct pic { - - /* 0x000000-0x00FFFF -- Local Registers */ - - /* 0x000000-0x000057 -- Standard Widget Configuration */ - u64 p_wid_id; /* 0x000000 */ - u64 p_wid_stat; /* 0x000008 */ - u64 p_wid_err_upper; /* 0x000010 */ - u64 p_wid_err_lower; /* 0x000018 */ - #define p_wid_err p_wid_err_lower - u64 p_wid_control; /* 0x000020 */ - u64 p_wid_req_timeout; /* 0x000028 */ - u64 p_wid_int_upper; /* 0x000030 */ - u64 p_wid_int_lower; /* 0x000038 */ - #define p_wid_int p_wid_int_lower - u64 p_wid_err_cmdword; /* 0x000040 */ - u64 p_wid_llp; /* 0x000048 */ - u64 p_wid_tflush; /* 0x000050 */ - - /* 0x000058-0x00007F -- Bridge-specific Widget Configuration */ - u64 p_wid_aux_err; /* 0x000058 */ - u64 p_wid_resp_upper; /* 0x000060 */ - u64 p_wid_resp_lower; /* 0x000068 */ - #define p_wid_resp p_wid_resp_lower - u64 p_wid_tst_pin_ctrl; /* 0x000070 */ - u64 p_wid_addr_lkerr; /* 0x000078 */ - - /* 0x000080-0x00008F -- PMU & MAP */ - u64 p_dir_map; /* 0x000080 */ - u64 _pad_000088; /* 0x000088 */ - - /* 0x000090-0x00009F -- SSRAM */ - u64 p_map_fault; /* 0x000090 */ - u64 _pad_000098; /* 0x000098 */ - - /* 0x0000A0-0x0000AF -- Arbitration */ - u64 p_arb; /* 0x0000A0 */ - u64 _pad_0000A8; /* 0x0000A8 */ - - /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */ - u64 p_ate_parity_err; /* 0x0000B0 */ - u64 _pad_0000B8; /* 0x0000B8 */ - - /* 0x0000C0-0x0000FF -- PCI/GIO */ - u64 p_bus_timeout; /* 0x0000C0 */ - u64 p_pci_cfg; /* 0x0000C8 */ - u64 p_pci_err_upper; /* 0x0000D0 */ - u64 p_pci_err_lower; /* 0x0000D8 */ - #define p_pci_err p_pci_err_lower - u64 _pad_0000E0[4]; /* 0x0000{E0..F8} */ - - /* 0x000100-0x0001FF -- Interrupt */ - u64 p_int_status; /* 0x000100 */ - u64 p_int_enable; /* 0x000108 */ - u64 p_int_rst_stat; /* 0x000110 */ - u64 p_int_mode; /* 0x000118 */ - u64 p_int_device; /* 0x000120 */ - u64 p_int_host_err; /* 0x000128 */ - u64 p_int_addr[8]; /* 0x0001{30,,,68} */ - u64 p_err_int_view; /* 0x000170 */ - u64 p_mult_int; /* 0x000178 */ - u64 p_force_always[8]; /* 0x0001{80,,,B8} */ - u64 p_force_pin[8]; /* 0x0001{C0,,,F8} */ - - /* 0x000200-0x000298 -- Device */ - u64 p_device[4]; /* 0x0002{00,,,18} */ - u64 _pad_000220[4]; /* 0x0002{20,,,38} */ - u64 p_wr_req_buf[4]; /* 0x0002{40,,,58} */ - u64 _pad_000260[4]; /* 0x0002{60,,,78} */ - u64 p_rrb_map[2]; /* 0x0002{80,,,88} */ - #define p_even_resp p_rrb_map[0] /* 0x000280 */ - #define p_odd_resp p_rrb_map[1] /* 0x000288 */ - u64 p_resp_status; /* 0x000290 */ - u64 p_resp_clear; /* 0x000298 */ - - u64 _pad_0002A0[12]; /* 0x0002{A0..F8} */ - - /* 0x000300-0x0003F8 -- Buffer Address Match Registers */ - struct { - u64 upper; /* 0x0003{00,,,F0} */ - u64 lower; /* 0x0003{08,,,F8} */ - } p_buf_addr_match[16]; - - /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */ - struct { - u64 flush_w_touch; /* 0x000{400,,,5C0} */ - u64 flush_wo_touch; /* 0x000{408,,,5C8} */ - u64 inflight; /* 0x000{410,,,5D0} */ - u64 prefetch; /* 0x000{418,,,5D8} */ - u64 total_pci_retry; /* 0x000{420,,,5E0} */ - u64 max_pci_retry; /* 0x000{428,,,5E8} */ - u64 max_latency; /* 0x000{430,,,5F0} */ - u64 clear_all; /* 0x000{438,,,5F8} */ - } p_buf_count[8]; - - - /* 0x000600-0x0009FF -- PCI/X registers */ - u64 p_pcix_bus_err_addr; /* 0x000600 */ - u64 p_pcix_bus_err_attr; /* 0x000608 */ - u64 p_pcix_bus_err_data; /* 0x000610 */ - u64 p_pcix_pio_split_addr; /* 0x000618 */ - u64 p_pcix_pio_split_attr; /* 0x000620 */ - u64 p_pcix_dma_req_err_attr; /* 0x000628 */ - u64 p_pcix_dma_req_err_addr; /* 0x000630 */ - u64 p_pcix_timeout; /* 0x000638 */ - - u64 _pad_000640[120]; /* 0x000{640,,,9F8} */ - - /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */ - struct { - u64 p_buf_addr; /* 0x000{A00,,,AF0} */ - u64 p_buf_attr; /* 0X000{A08,,,AF8} */ - } p_pcix_read_buf_64[16]; - - struct { - u64 p_buf_addr; /* 0x000{B00,,,BE0} */ - u64 p_buf_attr; /* 0x000{B08,,,BE8} */ - u64 p_buf_valid; /* 0x000{B10,,,BF0} */ - u64 __pad1; /* 0x000{B18,,,BF8} */ - } p_pcix_write_buf_64[8]; - - /* End of Local Registers -- Start of Address Map space */ - - char _pad_000c00[0x010000 - 0x000c00]; - - /* 0x010000-0x011fff -- Internal ATE RAM (Auto Parity Generation) */ - u64 p_int_ate_ram[1024]; /* 0x010000-0x011fff */ - - /* 0x012000-0x013fff -- Internal ATE RAM (Manual Parity Generation) */ - u64 p_int_ate_ram_mp[1024]; /* 0x012000-0x013fff */ - - char _pad_014000[0x18000 - 0x014000]; - - /* 0x18000-0x197F8 -- PIC Write Request Ram */ - u64 p_wr_req_lower[256]; /* 0x18000 - 0x187F8 */ - u64 p_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */ - u64 p_wr_req_parity[256]; /* 0x19000 - 0x197F8 */ - - char _pad_019800[0x20000 - 0x019800]; - - /* 0x020000-0x027FFF -- PCI Device Configuration Spaces */ - union { - u8 c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */ - u16 s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */ - u32 l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */ - u64 d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */ - union { - u8 c[0x100 / 1]; - u16 s[0x100 / 2]; - u32 l[0x100 / 4]; - u64 d[0x100 / 8]; - } f[8]; - } p_type0_cfg_dev[8]; /* 0x02{0000,,,7FFF} */ - - /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */ - union { - u8 c[0x1000 / 1]; /* 0x028000-0x029000 */ - u16 s[0x1000 / 2]; /* 0x028000-0x029000 */ - u32 l[0x1000 / 4]; /* 0x028000-0x029000 */ - u64 d[0x1000 / 8]; /* 0x028000-0x029000 */ - union { - u8 c[0x100 / 1]; - u16 s[0x100 / 2]; - u32 l[0x100 / 4]; - u64 d[0x100 / 8]; - } f[8]; - } p_type1_cfg; /* 0x028000-0x029000 */ - - char _pad_029000[0x030000-0x029000]; - - /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */ - union { - u8 c[8 / 1]; - u16 s[8 / 2]; - u32 l[8 / 4]; - u64 d[8 / 8]; - } p_pci_iack; /* 0x030000-0x030007 */ - - char _pad_030007[0x040000-0x030008]; - - /* 0x040000-0x030007 -- PCIX Special Cycle */ - union { - u8 c[8 / 1]; - u16 s[8 / 2]; - u32 l[8 / 4]; - u64 d[8 / 8]; - } p_pcix_cycle; /* 0x040000-0x040007 */ -}; - -#endif /* _ASM_IA64_SN_PCI_PIC_H */ diff --git a/include/asm-ia64/sn/rw_mmr.h b/include/asm-ia64/sn/rw_mmr.h deleted file mode 100644 index 2d78f4c5a45e..000000000000 --- a/include/asm-ia64/sn/rw_mmr.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002-2006 Silicon Graphics, Inc. All Rights Reserved. - */ -#ifndef _ASM_IA64_SN_RW_MMR_H -#define _ASM_IA64_SN_RW_MMR_H - - -/* - * This file that access MMRs via uncached physical addresses. - * pio_phys_read_mmr - read an MMR - * pio_phys_write_mmr - write an MMR - * pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0 - * Second MMR will be skipped if address is NULL - * - * Addresses passed to these routines should be uncached physical addresses - * ie., 0x80000.... - */ - - -extern long pio_phys_read_mmr(volatile long *mmr); -extern void pio_phys_write_mmr(volatile long *mmr, long val); -extern void pio_atomic_phys_write_mmrs(volatile long *mmr1, long val1, volatile long *mmr2, long val2); - -#endif /* _ASM_IA64_SN_RW_MMR_H */ diff --git a/include/asm-ia64/sn/shub_mmr.h b/include/asm-ia64/sn/shub_mmr.h deleted file mode 100644 index 7de1d1d4b71a..000000000000 --- a/include/asm-ia64/sn/shub_mmr.h +++ /dev/null @@ -1,502 +0,0 @@ -/* - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2001-2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_SHUB_MMR_H -#define _ASM_IA64_SN_SHUB_MMR_H - -/* ==================================================================== */ -/* Register "SH_IPI_INT" */ -/* SHub Inter-Processor Interrupt Registers */ -/* ==================================================================== */ -#define SH1_IPI_INT __IA64_UL_CONST(0x0000000110000380) -#define SH2_IPI_INT __IA64_UL_CONST(0x0000000010000380) - -/* SH_IPI_INT_TYPE */ -/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ -#define SH_IPI_INT_TYPE_SHFT 0 -#define SH_IPI_INT_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) - -/* SH_IPI_INT_AGT */ -/* Description: Agent, must be 0 for SHub */ -#define SH_IPI_INT_AGT_SHFT 3 -#define SH_IPI_INT_AGT_MASK __IA64_UL_CONST(0x0000000000000008) - -/* SH_IPI_INT_PID */ -/* Description: Processor ID, same setting as on targeted McKinley */ -#define SH_IPI_INT_PID_SHFT 4 -#define SH_IPI_INT_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) - -/* SH_IPI_INT_BASE */ -/* Description: Optional interrupt vector area, 2MB aligned */ -#define SH_IPI_INT_BASE_SHFT 21 -#define SH_IPI_INT_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) - -/* SH_IPI_INT_IDX */ -/* Description: Targeted McKinley interrupt vector */ -#define SH_IPI_INT_IDX_SHFT 52 -#define SH_IPI_INT_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) - -/* SH_IPI_INT_SEND */ -/* Description: Send Interrupt Message to PI, This generates a puls */ -#define SH_IPI_INT_SEND_SHFT 63 -#define SH_IPI_INT_SEND_MASK __IA64_UL_CONST(0x8000000000000000) - -/* ==================================================================== */ -/* Register "SH_EVENT_OCCURRED" */ -/* SHub Interrupt Event Occurred */ -/* ==================================================================== */ -#define SH1_EVENT_OCCURRED __IA64_UL_CONST(0x0000000110010000) -#define SH1_EVENT_OCCURRED_ALIAS __IA64_UL_CONST(0x0000000110010008) -#define SH2_EVENT_OCCURRED __IA64_UL_CONST(0x0000000010010000) -#define SH2_EVENT_OCCURRED_ALIAS __IA64_UL_CONST(0x0000000010010008) - -/* ==================================================================== */ -/* Register "SH_PI_CAM_CONTROL" */ -/* CRB CAM MMR Access Control */ -/* ==================================================================== */ -#define SH1_PI_CAM_CONTROL __IA64_UL_CONST(0x0000000120050300) - -/* ==================================================================== */ -/* Register "SH_SHUB_ID" */ -/* SHub ID Number */ -/* ==================================================================== */ -#define SH1_SHUB_ID __IA64_UL_CONST(0x0000000110060580) -#define SH1_SHUB_ID_REVISION_SHFT 28 -#define SH1_SHUB_ID_REVISION_MASK __IA64_UL_CONST(0x00000000f0000000) - -/* ==================================================================== */ -/* Register "SH_RTC" */ -/* Real-time Clock */ -/* ==================================================================== */ -#define SH1_RTC __IA64_UL_CONST(0x00000001101c0000) -#define SH2_RTC __IA64_UL_CONST(0x00000002101c0000) -#define SH_RTC_MASK __IA64_UL_CONST(0x007fffffffffffff) - -/* ==================================================================== */ -/* Register "SH_PIO_WRITE_STATUS_0|1" */ -/* PIO Write Status for CPU 0 & 1 */ -/* ==================================================================== */ -#define SH1_PIO_WRITE_STATUS_0 __IA64_UL_CONST(0x0000000120070200) -#define SH1_PIO_WRITE_STATUS_1 __IA64_UL_CONST(0x0000000120070280) -#define SH2_PIO_WRITE_STATUS_0 __IA64_UL_CONST(0x0000000020070200) -#define SH2_PIO_WRITE_STATUS_1 __IA64_UL_CONST(0x0000000020070280) -#define SH2_PIO_WRITE_STATUS_2 __IA64_UL_CONST(0x0000000020070300) -#define SH2_PIO_WRITE_STATUS_3 __IA64_UL_CONST(0x0000000020070380) - -/* SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK */ -/* Description: Deadlock response detected */ -#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT 1 -#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK \ - __IA64_UL_CONST(0x0000000000000002) - -/* SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT */ -/* Description: Count of currently pending PIO writes */ -#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT 56 -#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK \ - __IA64_UL_CONST(0x3f00000000000000) - -/* ==================================================================== */ -/* Register "SH_PIO_WRITE_STATUS_0_ALIAS" */ -/* ==================================================================== */ -#define SH1_PIO_WRITE_STATUS_0_ALIAS __IA64_UL_CONST(0x0000000120070208) -#define SH2_PIO_WRITE_STATUS_0_ALIAS __IA64_UL_CONST(0x0000000020070208) - -/* ==================================================================== */ -/* Register "SH_EVENT_OCCURRED" */ -/* SHub Interrupt Event Occurred */ -/* ==================================================================== */ -/* SH_EVENT_OCCURRED_UART_INT */ -/* Description: Pending Junk Bus UART Interrupt */ -#define SH_EVENT_OCCURRED_UART_INT_SHFT 20 -#define SH_EVENT_OCCURRED_UART_INT_MASK __IA64_UL_CONST(0x0000000000100000) - -/* SH_EVENT_OCCURRED_IPI_INT */ -/* Description: Pending IPI Interrupt */ -#define SH_EVENT_OCCURRED_IPI_INT_SHFT 28 -#define SH_EVENT_OCCURRED_IPI_INT_MASK __IA64_UL_CONST(0x0000000010000000) - -/* SH_EVENT_OCCURRED_II_INT0 */ -/* Description: Pending II 0 Interrupt */ -#define SH_EVENT_OCCURRED_II_INT0_SHFT 29 -#define SH_EVENT_OCCURRED_II_INT0_MASK __IA64_UL_CONST(0x0000000020000000) - -/* SH_EVENT_OCCURRED_II_INT1 */ -/* Description: Pending II 1 Interrupt */ -#define SH_EVENT_OCCURRED_II_INT1_SHFT 30 -#define SH_EVENT_OCCURRED_II_INT1_MASK __IA64_UL_CONST(0x0000000040000000) - -/* SH2_EVENT_OCCURRED_EXTIO_INT2 */ -/* Description: Pending SHUB 2 EXT IO INT2 */ -#define SH2_EVENT_OCCURRED_EXTIO_INT2_SHFT 33 -#define SH2_EVENT_OCCURRED_EXTIO_INT2_MASK __IA64_UL_CONST(0x0000000200000000) - -/* SH2_EVENT_OCCURRED_EXTIO_INT3 */ -/* Description: Pending SHUB 2 EXT IO INT3 */ -#define SH2_EVENT_OCCURRED_EXTIO_INT3_SHFT 34 -#define SH2_EVENT_OCCURRED_EXTIO_INT3_MASK __IA64_UL_CONST(0x0000000400000000) - -#define SH_ALL_INT_MASK \ - (SH_EVENT_OCCURRED_UART_INT_MASK | SH_EVENT_OCCURRED_IPI_INT_MASK | \ - SH_EVENT_OCCURRED_II_INT0_MASK | SH_EVENT_OCCURRED_II_INT1_MASK | \ - SH_EVENT_OCCURRED_II_INT1_MASK | SH2_EVENT_OCCURRED_EXTIO_INT2_MASK | \ - SH2_EVENT_OCCURRED_EXTIO_INT3_MASK) - - -/* ==================================================================== */ -/* LEDS */ -/* ==================================================================== */ -#define SH1_REAL_JUNK_BUS_LED0 0x7fed00000UL -#define SH1_REAL_JUNK_BUS_LED1 0x7fed10000UL -#define SH1_REAL_JUNK_BUS_LED2 0x7fed20000UL -#define SH1_REAL_JUNK_BUS_LED3 0x7fed30000UL - -#define SH2_REAL_JUNK_BUS_LED0 0xf0000000UL -#define SH2_REAL_JUNK_BUS_LED1 0xf0010000UL -#define SH2_REAL_JUNK_BUS_LED2 0xf0020000UL -#define SH2_REAL_JUNK_BUS_LED3 0xf0030000UL - -/* ==================================================================== */ -/* Register "SH1_PTC_0" */ -/* Puge Translation Cache Message Configuration Information */ -/* ==================================================================== */ -#define SH1_PTC_0 __IA64_UL_CONST(0x00000001101a0000) - -/* SH1_PTC_0_A */ -/* Description: Type */ -#define SH1_PTC_0_A_SHFT 0 - -/* SH1_PTC_0_PS */ -/* Description: Page Size */ -#define SH1_PTC_0_PS_SHFT 2 - -/* SH1_PTC_0_RID */ -/* Description: Region ID */ -#define SH1_PTC_0_RID_SHFT 8 - -/* SH1_PTC_0_START */ -/* Description: Start */ -#define SH1_PTC_0_START_SHFT 63 - -/* ==================================================================== */ -/* Register "SH1_PTC_1" */ -/* Puge Translation Cache Message Configuration Information */ -/* ==================================================================== */ -#define SH1_PTC_1 __IA64_UL_CONST(0x00000001101a0080) - -/* SH1_PTC_1_START */ -/* Description: PTC_1 Start */ -#define SH1_PTC_1_START_SHFT 63 - -/* ==================================================================== */ -/* Register "SH2_PTC" */ -/* Puge Translation Cache Message Configuration Information */ -/* ==================================================================== */ -#define SH2_PTC __IA64_UL_CONST(0x0000000170000000) - -/* SH2_PTC_A */ -/* Description: Type */ -#define SH2_PTC_A_SHFT 0 - -/* SH2_PTC_PS */ -/* Description: Page Size */ -#define SH2_PTC_PS_SHFT 2 - -/* SH2_PTC_RID */ -/* Description: Region ID */ -#define SH2_PTC_RID_SHFT 4 - -/* SH2_PTC_START */ -/* Description: Start */ -#define SH2_PTC_START_SHFT 63 - -/* SH2_PTC_ADDR_RID */ -/* Description: Region ID */ -#define SH2_PTC_ADDR_SHFT 4 -#define SH2_PTC_ADDR_MASK __IA64_UL_CONST(0x1ffffffffffff000) - -/* ==================================================================== */ -/* Register "SH_RTC1_INT_CONFIG" */ -/* SHub RTC 1 Interrupt Config Registers */ -/* ==================================================================== */ - -#define SH1_RTC1_INT_CONFIG __IA64_UL_CONST(0x0000000110001480) -#define SH2_RTC1_INT_CONFIG __IA64_UL_CONST(0x0000000010001480) -#define SH_RTC1_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff) -#define SH_RTC1_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_RTC1_INT_CONFIG_TYPE */ -/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ -#define SH_RTC1_INT_CONFIG_TYPE_SHFT 0 -#define SH_RTC1_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) - -/* SH_RTC1_INT_CONFIG_AGT */ -/* Description: Agent, must be 0 for SHub */ -#define SH_RTC1_INT_CONFIG_AGT_SHFT 3 -#define SH_RTC1_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008) - -/* SH_RTC1_INT_CONFIG_PID */ -/* Description: Processor ID, same setting as on targeted McKinley */ -#define SH_RTC1_INT_CONFIG_PID_SHFT 4 -#define SH_RTC1_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) - -/* SH_RTC1_INT_CONFIG_BASE */ -/* Description: Optional interrupt vector area, 2MB aligned */ -#define SH_RTC1_INT_CONFIG_BASE_SHFT 21 -#define SH_RTC1_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) - -/* SH_RTC1_INT_CONFIG_IDX */ -/* Description: Targeted McKinley interrupt vector */ -#define SH_RTC1_INT_CONFIG_IDX_SHFT 52 -#define SH_RTC1_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) - -/* ==================================================================== */ -/* Register "SH_RTC1_INT_ENABLE" */ -/* SHub RTC 1 Interrupt Enable Registers */ -/* ==================================================================== */ - -#define SH1_RTC1_INT_ENABLE __IA64_UL_CONST(0x0000000110001500) -#define SH2_RTC1_INT_ENABLE __IA64_UL_CONST(0x0000000010001500) -#define SH_RTC1_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001) -#define SH_RTC1_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_RTC1_INT_ENABLE_RTC1_ENABLE */ -/* Description: Enable RTC 1 Interrupt */ -#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT 0 -#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK \ - __IA64_UL_CONST(0x0000000000000001) - -/* ==================================================================== */ -/* Register "SH_RTC2_INT_CONFIG" */ -/* SHub RTC 2 Interrupt Config Registers */ -/* ==================================================================== */ - -#define SH1_RTC2_INT_CONFIG __IA64_UL_CONST(0x0000000110001580) -#define SH2_RTC2_INT_CONFIG __IA64_UL_CONST(0x0000000010001580) -#define SH_RTC2_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff) -#define SH_RTC2_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_RTC2_INT_CONFIG_TYPE */ -/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ -#define SH_RTC2_INT_CONFIG_TYPE_SHFT 0 -#define SH_RTC2_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) - -/* SH_RTC2_INT_CONFIG_AGT */ -/* Description: Agent, must be 0 for SHub */ -#define SH_RTC2_INT_CONFIG_AGT_SHFT 3 -#define SH_RTC2_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008) - -/* SH_RTC2_INT_CONFIG_PID */ -/* Description: Processor ID, same setting as on targeted McKinley */ -#define SH_RTC2_INT_CONFIG_PID_SHFT 4 -#define SH_RTC2_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) - -/* SH_RTC2_INT_CONFIG_BASE */ -/* Description: Optional interrupt vector area, 2MB aligned */ -#define SH_RTC2_INT_CONFIG_BASE_SHFT 21 -#define SH_RTC2_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) - -/* SH_RTC2_INT_CONFIG_IDX */ -/* Description: Targeted McKinley interrupt vector */ -#define SH_RTC2_INT_CONFIG_IDX_SHFT 52 -#define SH_RTC2_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) - -/* ==================================================================== */ -/* Register "SH_RTC2_INT_ENABLE" */ -/* SHub RTC 2 Interrupt Enable Registers */ -/* ==================================================================== */ - -#define SH1_RTC2_INT_ENABLE __IA64_UL_CONST(0x0000000110001600) -#define SH2_RTC2_INT_ENABLE __IA64_UL_CONST(0x0000000010001600) -#define SH_RTC2_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001) -#define SH_RTC2_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_RTC2_INT_ENABLE_RTC2_ENABLE */ -/* Description: Enable RTC 2 Interrupt */ -#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT 0 -#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK \ - __IA64_UL_CONST(0x0000000000000001) - -/* ==================================================================== */ -/* Register "SH_RTC3_INT_CONFIG" */ -/* SHub RTC 3 Interrupt Config Registers */ -/* ==================================================================== */ - -#define SH1_RTC3_INT_CONFIG __IA64_UL_CONST(0x0000000110001680) -#define SH2_RTC3_INT_CONFIG __IA64_UL_CONST(0x0000000010001680) -#define SH_RTC3_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff) -#define SH_RTC3_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_RTC3_INT_CONFIG_TYPE */ -/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ -#define SH_RTC3_INT_CONFIG_TYPE_SHFT 0 -#define SH_RTC3_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) - -/* SH_RTC3_INT_CONFIG_AGT */ -/* Description: Agent, must be 0 for SHub */ -#define SH_RTC3_INT_CONFIG_AGT_SHFT 3 -#define SH_RTC3_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008) - -/* SH_RTC3_INT_CONFIG_PID */ -/* Description: Processor ID, same setting as on targeted McKinley */ -#define SH_RTC3_INT_CONFIG_PID_SHFT 4 -#define SH_RTC3_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) - -/* SH_RTC3_INT_CONFIG_BASE */ -/* Description: Optional interrupt vector area, 2MB aligned */ -#define SH_RTC3_INT_CONFIG_BASE_SHFT 21 -#define SH_RTC3_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) - -/* SH_RTC3_INT_CONFIG_IDX */ -/* Description: Targeted McKinley interrupt vector */ -#define SH_RTC3_INT_CONFIG_IDX_SHFT 52 -#define SH_RTC3_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) - -/* ==================================================================== */ -/* Register "SH_RTC3_INT_ENABLE" */ -/* SHub RTC 3 Interrupt Enable Registers */ -/* ==================================================================== */ - -#define SH1_RTC3_INT_ENABLE __IA64_UL_CONST(0x0000000110001700) -#define SH2_RTC3_INT_ENABLE __IA64_UL_CONST(0x0000000010001700) -#define SH_RTC3_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001) -#define SH_RTC3_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_RTC3_INT_ENABLE_RTC3_ENABLE */ -/* Description: Enable RTC 3 Interrupt */ -#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT 0 -#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK \ - __IA64_UL_CONST(0x0000000000000001) - -/* SH_EVENT_OCCURRED_RTC1_INT */ -/* Description: Pending RTC 1 Interrupt */ -#define SH_EVENT_OCCURRED_RTC1_INT_SHFT 24 -#define SH_EVENT_OCCURRED_RTC1_INT_MASK __IA64_UL_CONST(0x0000000001000000) - -/* SH_EVENT_OCCURRED_RTC2_INT */ -/* Description: Pending RTC 2 Interrupt */ -#define SH_EVENT_OCCURRED_RTC2_INT_SHFT 25 -#define SH_EVENT_OCCURRED_RTC2_INT_MASK __IA64_UL_CONST(0x0000000002000000) - -/* SH_EVENT_OCCURRED_RTC3_INT */ -/* Description: Pending RTC 3 Interrupt */ -#define SH_EVENT_OCCURRED_RTC3_INT_SHFT 26 -#define SH_EVENT_OCCURRED_RTC3_INT_MASK __IA64_UL_CONST(0x0000000004000000) - -/* ==================================================================== */ -/* Register "SH_IPI_ACCESS" */ -/* CPU interrupt Access Permission Bits */ -/* ==================================================================== */ - -#define SH1_IPI_ACCESS __IA64_UL_CONST(0x0000000110060480) -#define SH2_IPI_ACCESS0 __IA64_UL_CONST(0x0000000010060c00) -#define SH2_IPI_ACCESS1 __IA64_UL_CONST(0x0000000010060c80) -#define SH2_IPI_ACCESS2 __IA64_UL_CONST(0x0000000010060d00) -#define SH2_IPI_ACCESS3 __IA64_UL_CONST(0x0000000010060d80) - -/* ==================================================================== */ -/* Register "SH_INT_CMPB" */ -/* RTC Compare Value for Processor B */ -/* ==================================================================== */ - -#define SH1_INT_CMPB __IA64_UL_CONST(0x00000001101b0080) -#define SH2_INT_CMPB __IA64_UL_CONST(0x00000000101b0080) -#define SH_INT_CMPB_MASK __IA64_UL_CONST(0x007fffffffffffff) -#define SH_INT_CMPB_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_INT_CMPB_REAL_TIME_CMPB */ -/* Description: Real Time Clock Compare */ -#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT 0 -#define SH_INT_CMPB_REAL_TIME_CMPB_MASK __IA64_UL_CONST(0x007fffffffffffff) - -/* ==================================================================== */ -/* Register "SH_INT_CMPC" */ -/* RTC Compare Value for Processor C */ -/* ==================================================================== */ - -#define SH1_INT_CMPC __IA64_UL_CONST(0x00000001101b0100) -#define SH2_INT_CMPC __IA64_UL_CONST(0x00000000101b0100) -#define SH_INT_CMPC_MASK __IA64_UL_CONST(0x007fffffffffffff) -#define SH_INT_CMPC_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_INT_CMPC_REAL_TIME_CMPC */ -/* Description: Real Time Clock Compare */ -#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT 0 -#define SH_INT_CMPC_REAL_TIME_CMPC_MASK __IA64_UL_CONST(0x007fffffffffffff) - -/* ==================================================================== */ -/* Register "SH_INT_CMPD" */ -/* RTC Compare Value for Processor D */ -/* ==================================================================== */ - -#define SH1_INT_CMPD __IA64_UL_CONST(0x00000001101b0180) -#define SH2_INT_CMPD __IA64_UL_CONST(0x00000000101b0180) -#define SH_INT_CMPD_MASK __IA64_UL_CONST(0x007fffffffffffff) -#define SH_INT_CMPD_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_INT_CMPD_REAL_TIME_CMPD */ -/* Description: Real Time Clock Compare */ -#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT 0 -#define SH_INT_CMPD_REAL_TIME_CMPD_MASK __IA64_UL_CONST(0x007fffffffffffff) - -/* ==================================================================== */ -/* Register "SH_MD_DQLP_MMR_DIR_PRIVEC0" */ -/* privilege vector for acc=0 */ -/* ==================================================================== */ -#define SH1_MD_DQLP_MMR_DIR_PRIVEC0 __IA64_UL_CONST(0x0000000100030300) - -/* ==================================================================== */ -/* Register "SH_MD_DQRP_MMR_DIR_PRIVEC0" */ -/* privilege vector for acc=0 */ -/* ==================================================================== */ -#define SH1_MD_DQRP_MMR_DIR_PRIVEC0 __IA64_UL_CONST(0x0000000100050300) - -/* ==================================================================== */ -/* Some MMRs are functionally identical (or close enough) on both SHUB1 */ -/* and SHUB2 that it makes sense to define a geberic name for the MMR. */ -/* It is acceptible to use (for example) SH_IPI_INT to reference the */ -/* the IPI MMR. The value of SH_IPI_INT is determined at runtime based */ -/* on the type of the SHUB. Do not use these #defines in performance */ -/* critical code or loops - there is a small performance penalty. */ -/* ==================================================================== */ -#define shubmmr(a,b) (is_shub2() ? a##2_##b : a##1_##b) - -#define SH_REAL_JUNK_BUS_LED0 shubmmr(SH, REAL_JUNK_BUS_LED0) -#define SH_IPI_INT shubmmr(SH, IPI_INT) -#define SH_EVENT_OCCURRED shubmmr(SH, EVENT_OCCURRED) -#define SH_EVENT_OCCURRED_ALIAS shubmmr(SH, EVENT_OCCURRED_ALIAS) -#define SH_RTC shubmmr(SH, RTC) -#define SH_RTC1_INT_CONFIG shubmmr(SH, RTC1_INT_CONFIG) -#define SH_RTC1_INT_ENABLE shubmmr(SH, RTC1_INT_ENABLE) -#define SH_RTC2_INT_CONFIG shubmmr(SH, RTC2_INT_CONFIG) -#define SH_RTC2_INT_ENABLE shubmmr(SH, RTC2_INT_ENABLE) -#define SH_RTC3_INT_CONFIG shubmmr(SH, RTC3_INT_CONFIG) -#define SH_RTC3_INT_ENABLE shubmmr(SH, RTC3_INT_ENABLE) -#define SH_INT_CMPB shubmmr(SH, INT_CMPB) -#define SH_INT_CMPC shubmmr(SH, INT_CMPC) -#define SH_INT_CMPD shubmmr(SH, INT_CMPD) - -/* ========================================================================== */ -/* Register "SH2_BT_ENG_CSR_0" */ -/* Engine 0 Control and Status Register */ -/* ========================================================================== */ - -#define SH2_BT_ENG_CSR_0 __IA64_UL_CONST(0x0000000030040000) -#define SH2_BT_ENG_SRC_ADDR_0 __IA64_UL_CONST(0x0000000030040080) -#define SH2_BT_ENG_DEST_ADDR_0 __IA64_UL_CONST(0x0000000030040100) -#define SH2_BT_ENG_NOTIF_ADDR_0 __IA64_UL_CONST(0x0000000030040180) - -/* ========================================================================== */ -/* BTE interfaces 1-3 */ -/* ========================================================================== */ - -#define SH2_BT_ENG_CSR_1 __IA64_UL_CONST(0x0000000030050000) -#define SH2_BT_ENG_CSR_2 __IA64_UL_CONST(0x0000000030060000) -#define SH2_BT_ENG_CSR_3 __IA64_UL_CONST(0x0000000030070000) - -#endif /* _ASM_IA64_SN_SHUB_MMR_H */ diff --git a/include/asm-ia64/sn/shubio.h b/include/asm-ia64/sn/shubio.h deleted file mode 100644 index 22a6f18a5313..000000000000 --- a/include/asm-ia64/sn/shubio.h +++ /dev/null @@ -1,3358 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_SHUBIO_H -#define _ASM_IA64_SN_SHUBIO_H - -#define HUB_WIDGET_ID_MAX 0xf -#define IIO_NUM_ITTES 7 -#define HUB_NUM_BIG_WINDOW (IIO_NUM_ITTES - 1) - -#define IIO_WID 0x00400000 /* Crosstalk Widget Identification */ - /* This register is also accessible from - * Crosstalk at address 0x0. */ -#define IIO_WSTAT 0x00400008 /* Crosstalk Widget Status */ -#define IIO_WCR 0x00400020 /* Crosstalk Widget Control Register */ -#define IIO_ILAPR 0x00400100 /* IO Local Access Protection Register */ -#define IIO_ILAPO 0x00400108 /* IO Local Access Protection Override */ -#define IIO_IOWA 0x00400110 /* IO Outbound Widget Access */ -#define IIO_IIWA 0x00400118 /* IO Inbound Widget Access */ -#define IIO_IIDEM 0x00400120 /* IO Inbound Device Error Mask */ -#define IIO_ILCSR 0x00400128 /* IO LLP Control and Status Register */ -#define IIO_ILLR 0x00400130 /* IO LLP Log Register */ -#define IIO_IIDSR 0x00400138 /* IO Interrupt Destination */ - -#define IIO_IGFX0 0x00400140 /* IO Graphics Node-Widget Map 0 */ -#define IIO_IGFX1 0x00400148 /* IO Graphics Node-Widget Map 1 */ - -#define IIO_ISCR0 0x00400150 /* IO Scratch Register 0 */ -#define IIO_ISCR1 0x00400158 /* IO Scratch Register 1 */ - -#define IIO_ITTE1 0x00400160 /* IO Translation Table Entry 1 */ -#define IIO_ITTE2 0x00400168 /* IO Translation Table Entry 2 */ -#define IIO_ITTE3 0x00400170 /* IO Translation Table Entry 3 */ -#define IIO_ITTE4 0x00400178 /* IO Translation Table Entry 4 */ -#define IIO_ITTE5 0x00400180 /* IO Translation Table Entry 5 */ -#define IIO_ITTE6 0x00400188 /* IO Translation Table Entry 6 */ -#define IIO_ITTE7 0x00400190 /* IO Translation Table Entry 7 */ - -#define IIO_IPRB0 0x00400198 /* IO PRB Entry 0 */ -#define IIO_IPRB8 0x004001A0 /* IO PRB Entry 8 */ -#define IIO_IPRB9 0x004001A8 /* IO PRB Entry 9 */ -#define IIO_IPRBA 0x004001B0 /* IO PRB Entry A */ -#define IIO_IPRBB 0x004001B8 /* IO PRB Entry B */ -#define IIO_IPRBC 0x004001C0 /* IO PRB Entry C */ -#define IIO_IPRBD 0x004001C8 /* IO PRB Entry D */ -#define IIO_IPRBE 0x004001D0 /* IO PRB Entry E */ -#define IIO_IPRBF 0x004001D8 /* IO PRB Entry F */ - -#define IIO_IXCC 0x004001E0 /* IO Crosstalk Credit Count Timeout */ -#define IIO_IMEM 0x004001E8 /* IO Miscellaneous Error Mask */ -#define IIO_IXTT 0x004001F0 /* IO Crosstalk Timeout Threshold */ -#define IIO_IECLR 0x004001F8 /* IO Error Clear Register */ -#define IIO_IBCR 0x00400200 /* IO BTE Control Register */ - -#define IIO_IXSM 0x00400208 /* IO Crosstalk Spurious Message */ -#define IIO_IXSS 0x00400210 /* IO Crosstalk Spurious Sideband */ - -#define IIO_ILCT 0x00400218 /* IO LLP Channel Test */ - -#define IIO_IIEPH1 0x00400220 /* IO Incoming Error Packet Header, Part 1 */ -#define IIO_IIEPH2 0x00400228 /* IO Incoming Error Packet Header, Part 2 */ - -#define IIO_ISLAPR 0x00400230 /* IO SXB Local Access Protection Regster */ -#define IIO_ISLAPO 0x00400238 /* IO SXB Local Access Protection Override */ - -#define IIO_IWI 0x00400240 /* IO Wrapper Interrupt Register */ -#define IIO_IWEL 0x00400248 /* IO Wrapper Error Log Register */ -#define IIO_IWC 0x00400250 /* IO Wrapper Control Register */ -#define IIO_IWS 0x00400258 /* IO Wrapper Status Register */ -#define IIO_IWEIM 0x00400260 /* IO Wrapper Error Interrupt Masking Register */ - -#define IIO_IPCA 0x00400300 /* IO PRB Counter Adjust */ - -#define IIO_IPRTE0_A 0x00400308 /* IO PIO Read Address Table Entry 0, Part A */ -#define IIO_IPRTE1_A 0x00400310 /* IO PIO Read Address Table Entry 1, Part A */ -#define IIO_IPRTE2_A 0x00400318 /* IO PIO Read Address Table Entry 2, Part A */ -#define IIO_IPRTE3_A 0x00400320 /* IO PIO Read Address Table Entry 3, Part A */ -#define IIO_IPRTE4_A 0x00400328 /* IO PIO Read Address Table Entry 4, Part A */ -#define IIO_IPRTE5_A 0x00400330 /* IO PIO Read Address Table Entry 5, Part A */ -#define IIO_IPRTE6_A 0x00400338 /* IO PIO Read Address Table Entry 6, Part A */ -#define IIO_IPRTE7_A 0x00400340 /* IO PIO Read Address Table Entry 7, Part A */ - -#define IIO_IPRTE0_B 0x00400348 /* IO PIO Read Address Table Entry 0, Part B */ -#define IIO_IPRTE1_B 0x00400350 /* IO PIO Read Address Table Entry 1, Part B */ -#define IIO_IPRTE2_B 0x00400358 /* IO PIO Read Address Table Entry 2, Part B */ -#define IIO_IPRTE3_B 0x00400360 /* IO PIO Read Address Table Entry 3, Part B */ -#define IIO_IPRTE4_B 0x00400368 /* IO PIO Read Address Table Entry 4, Part B */ -#define IIO_IPRTE5_B 0x00400370 /* IO PIO Read Address Table Entry 5, Part B */ -#define IIO_IPRTE6_B 0x00400378 /* IO PIO Read Address Table Entry 6, Part B */ -#define IIO_IPRTE7_B 0x00400380 /* IO PIO Read Address Table Entry 7, Part B */ - -#define IIO_IPDR 0x00400388 /* IO PIO Deallocation Register */ -#define IIO_ICDR 0x00400390 /* IO CRB Entry Deallocation Register */ -#define IIO_IFDR 0x00400398 /* IO IOQ FIFO Depth Register */ -#define IIO_IIAP 0x004003A0 /* IO IIQ Arbitration Parameters */ -#define IIO_ICMR 0x004003A8 /* IO CRB Management Register */ -#define IIO_ICCR 0x004003B0 /* IO CRB Control Register */ -#define IIO_ICTO 0x004003B8 /* IO CRB Timeout */ -#define IIO_ICTP 0x004003C0 /* IO CRB Timeout Prescalar */ - -#define IIO_ICRB0_A 0x00400400 /* IO CRB Entry 0_A */ -#define IIO_ICRB0_B 0x00400408 /* IO CRB Entry 0_B */ -#define IIO_ICRB0_C 0x00400410 /* IO CRB Entry 0_C */ -#define IIO_ICRB0_D 0x00400418 /* IO CRB Entry 0_D */ -#define IIO_ICRB0_E 0x00400420 /* IO CRB Entry 0_E */ - -#define IIO_ICRB1_A 0x00400430 /* IO CRB Entry 1_A */ -#define IIO_ICRB1_B 0x00400438 /* IO CRB Entry 1_B */ -#define IIO_ICRB1_C 0x00400440 /* IO CRB Entry 1_C */ -#define IIO_ICRB1_D 0x00400448 /* IO CRB Entry 1_D */ -#define IIO_ICRB1_E 0x00400450 /* IO CRB Entry 1_E */ - -#define IIO_ICRB2_A 0x00400460 /* IO CRB Entry 2_A */ -#define IIO_ICRB2_B 0x00400468 /* IO CRB Entry 2_B */ -#define IIO_ICRB2_C 0x00400470 /* IO CRB Entry 2_C */ -#define IIO_ICRB2_D 0x00400478 /* IO CRB Entry 2_D */ -#define IIO_ICRB2_E 0x00400480 /* IO CRB Entry 2_E */ - -#define IIO_ICRB3_A 0x00400490 /* IO CRB Entry 3_A */ -#define IIO_ICRB3_B 0x00400498 /* IO CRB Entry 3_B */ -#define IIO_ICRB3_C 0x004004a0 /* IO CRB Entry 3_C */ -#define IIO_ICRB3_D 0x004004a8 /* IO CRB Entry 3_D */ -#define IIO_ICRB3_E 0x004004b0 /* IO CRB Entry 3_E */ - -#define IIO_ICRB4_A 0x004004c0 /* IO CRB Entry 4_A */ -#define IIO_ICRB4_B 0x004004c8 /* IO CRB Entry 4_B */ -#define IIO_ICRB4_C 0x004004d0 /* IO CRB Entry 4_C */ -#define IIO_ICRB4_D 0x004004d8 /* IO CRB Entry 4_D */ -#define IIO_ICRB4_E 0x004004e0 /* IO CRB Entry 4_E */ - -#define IIO_ICRB5_A 0x004004f0 /* IO CRB Entry 5_A */ -#define IIO_ICRB5_B 0x004004f8 /* IO CRB Entry 5_B */ -#define IIO_ICRB5_C 0x00400500 /* IO CRB Entry 5_C */ -#define IIO_ICRB5_D 0x00400508 /* IO CRB Entry 5_D */ -#define IIO_ICRB5_E 0x00400510 /* IO CRB Entry 5_E */ - -#define IIO_ICRB6_A 0x00400520 /* IO CRB Entry 6_A */ -#define IIO_ICRB6_B 0x00400528 /* IO CRB Entry 6_B */ -#define IIO_ICRB6_C 0x00400530 /* IO CRB Entry 6_C */ -#define IIO_ICRB6_D 0x00400538 /* IO CRB Entry 6_D */ -#define IIO_ICRB6_E 0x00400540 /* IO CRB Entry 6_E */ - -#define IIO_ICRB7_A 0x00400550 /* IO CRB Entry 7_A */ -#define IIO_ICRB7_B 0x00400558 /* IO CRB Entry 7_B */ -#define IIO_ICRB7_C 0x00400560 /* IO CRB Entry 7_C */ -#define IIO_ICRB7_D 0x00400568 /* IO CRB Entry 7_D */ -#define IIO_ICRB7_E 0x00400570 /* IO CRB Entry 7_E */ - -#define IIO_ICRB8_A 0x00400580 /* IO CRB Entry 8_A */ -#define IIO_ICRB8_B 0x00400588 /* IO CRB Entry 8_B */ -#define IIO_ICRB8_C 0x00400590 /* IO CRB Entry 8_C */ -#define IIO_ICRB8_D 0x00400598 /* IO CRB Entry 8_D */ -#define IIO_ICRB8_E 0x004005a0 /* IO CRB Entry 8_E */ - -#define IIO_ICRB9_A 0x004005b0 /* IO CRB Entry 9_A */ -#define IIO_ICRB9_B 0x004005b8 /* IO CRB Entry 9_B */ -#define IIO_ICRB9_C 0x004005c0 /* IO CRB Entry 9_C */ -#define IIO_ICRB9_D 0x004005c8 /* IO CRB Entry 9_D */ -#define IIO_ICRB9_E 0x004005d0 /* IO CRB Entry 9_E */ - -#define IIO_ICRBA_A 0x004005e0 /* IO CRB Entry A_A */ -#define IIO_ICRBA_B 0x004005e8 /* IO CRB Entry A_B */ -#define IIO_ICRBA_C 0x004005f0 /* IO CRB Entry A_C */ -#define IIO_ICRBA_D 0x004005f8 /* IO CRB Entry A_D */ -#define IIO_ICRBA_E 0x00400600 /* IO CRB Entry A_E */ - -#define IIO_ICRBB_A 0x00400610 /* IO CRB Entry B_A */ -#define IIO_ICRBB_B 0x00400618 /* IO CRB Entry B_B */ -#define IIO_ICRBB_C 0x00400620 /* IO CRB Entry B_C */ -#define IIO_ICRBB_D 0x00400628 /* IO CRB Entry B_D */ -#define IIO_ICRBB_E 0x00400630 /* IO CRB Entry B_E */ - -#define IIO_ICRBC_A 0x00400640 /* IO CRB Entry C_A */ -#define IIO_ICRBC_B 0x00400648 /* IO CRB Entry C_B */ -#define IIO_ICRBC_C 0x00400650 /* IO CRB Entry C_C */ -#define IIO_ICRBC_D 0x00400658 /* IO CRB Entry C_D */ -#define IIO_ICRBC_E 0x00400660 /* IO CRB Entry C_E */ - -#define IIO_ICRBD_A 0x00400670 /* IO CRB Entry D_A */ -#define IIO_ICRBD_B 0x00400678 /* IO CRB Entry D_B */ -#define IIO_ICRBD_C 0x00400680 /* IO CRB Entry D_C */ -#define IIO_ICRBD_D 0x00400688 /* IO CRB Entry D_D */ -#define IIO_ICRBD_E 0x00400690 /* IO CRB Entry D_E */ - -#define IIO_ICRBE_A 0x004006a0 /* IO CRB Entry E_A */ -#define IIO_ICRBE_B 0x004006a8 /* IO CRB Entry E_B */ -#define IIO_ICRBE_C 0x004006b0 /* IO CRB Entry E_C */ -#define IIO_ICRBE_D 0x004006b8 /* IO CRB Entry E_D */ -#define IIO_ICRBE_E 0x004006c0 /* IO CRB Entry E_E */ - -#define IIO_ICSML 0x00400700 /* IO CRB Spurious Message Low */ -#define IIO_ICSMM 0x00400708 /* IO CRB Spurious Message Middle */ -#define IIO_ICSMH 0x00400710 /* IO CRB Spurious Message High */ - -#define IIO_IDBSS 0x00400718 /* IO Debug Submenu Select */ - -#define IIO_IBLS0 0x00410000 /* IO BTE Length Status 0 */ -#define IIO_IBSA0 0x00410008 /* IO BTE Source Address 0 */ -#define IIO_IBDA0 0x00410010 /* IO BTE Destination Address 0 */ -#define IIO_IBCT0 0x00410018 /* IO BTE Control Terminate 0 */ -#define IIO_IBNA0 0x00410020 /* IO BTE Notification Address 0 */ -#define IIO_IBIA0 0x00410028 /* IO BTE Interrupt Address 0 */ -#define IIO_IBLS1 0x00420000 /* IO BTE Length Status 1 */ -#define IIO_IBSA1 0x00420008 /* IO BTE Source Address 1 */ -#define IIO_IBDA1 0x00420010 /* IO BTE Destination Address 1 */ -#define IIO_IBCT1 0x00420018 /* IO BTE Control Terminate 1 */ -#define IIO_IBNA1 0x00420020 /* IO BTE Notification Address 1 */ -#define IIO_IBIA1 0x00420028 /* IO BTE Interrupt Address 1 */ - -#define IIO_IPCR 0x00430000 /* IO Performance Control */ -#define IIO_IPPR 0x00430008 /* IO Performance Profiling */ - -/************************************************************************ - * * - * Description: This register echoes some information from the * - * LB_REV_ID register. It is available through Crosstalk as described * - * above. The REV_NUM and MFG_NUM fields receive their values from * - * the REVISION and MANUFACTURER fields in the LB_REV_ID register. * - * The PART_NUM field's value is the Crosstalk device ID number that * - * Steve Miller assigned to the SHub chip. * - * * - ************************************************************************/ - -typedef union ii_wid_u { - u64 ii_wid_regval; - struct { - u64 w_rsvd_1:1; - u64 w_mfg_num:11; - u64 w_part_num:16; - u64 w_rev_num:4; - u64 w_rsvd:32; - } ii_wid_fld_s; -} ii_wid_u_t; - -/************************************************************************ - * * - * The fields in this register are set upon detection of an error * - * and cleared by various mechanisms, as explained in the * - * description. * - * * - ************************************************************************/ - -typedef union ii_wstat_u { - u64 ii_wstat_regval; - struct { - u64 w_pending:4; - u64 w_xt_crd_to:1; - u64 w_xt_tail_to:1; - u64 w_rsvd_3:3; - u64 w_tx_mx_rty:1; - u64 w_rsvd_2:6; - u64 w_llp_tx_cnt:8; - u64 w_rsvd_1:8; - u64 w_crazy:1; - u64 w_rsvd:31; - } ii_wstat_fld_s; -} ii_wstat_u_t; - -/************************************************************************ - * * - * Description: This is a read-write enabled register. It controls * - * various aspects of the Crosstalk flow control. * - * * - ************************************************************************/ - -typedef union ii_wcr_u { - u64 ii_wcr_regval; - struct { - u64 w_wid:4; - u64 w_tag:1; - u64 w_rsvd_1:8; - u64 w_dst_crd:3; - u64 w_f_bad_pkt:1; - u64 w_dir_con:1; - u64 w_e_thresh:5; - u64 w_rsvd:41; - } ii_wcr_fld_s; -} ii_wcr_u_t; - -/************************************************************************ - * * - * Description: This register's value is a bit vector that guards * - * access to local registers within the II as well as to external * - * Crosstalk widgets. Each bit in the register corresponds to a * - * particular region in the system; a region consists of one, two or * - * four nodes (depending on the value of the REGION_SIZE field in the * - * LB_REV_ID register, which is documented in Section 8.3.1.1). The * - * protection provided by this register applies to PIO read * - * operations as well as PIO write operations. The II will perform a * - * PIO read or write request only if the bit for the requestor's * - * region is set; otherwise, the II will not perform the requested * - * operation and will return an error response. When a PIO read or * - * write request targets an external Crosstalk widget, then not only * - * must the bit for the requestor's region be set in the ILAPR, but * - * also the target widget's bit in the IOWA register must be set in * - * order for the II to perform the requested operation; otherwise, * - * the II will return an error response. Hence, the protection * - * provided by the IOWA register supplements the protection provided * - * by the ILAPR for requests that target external Crosstalk widgets. * - * This register itself can be accessed only by the nodes whose * - * region ID bits are enabled in this same register. It can also be * - * accessed through the IAlias space by the local processors. * - * The reset value of this register allows access by all nodes. * - * * - ************************************************************************/ - -typedef union ii_ilapr_u { - u64 ii_ilapr_regval; - struct { - u64 i_region:64; - } ii_ilapr_fld_s; -} ii_ilapr_u_t; - -/************************************************************************ - * * - * Description: A write to this register of the 64-bit value * - * "SGIrules" in ASCII, will cause the bit in the ILAPR register * - * corresponding to the region of the requestor to be set (allow * - * access). A write of any other value will be ignored. Access * - * protection for this register is "SGIrules". * - * This register can also be accessed through the IAlias space. * - * However, this access will not change the access permissions in the * - * ILAPR. * - * * - ************************************************************************/ - -typedef union ii_ilapo_u { - u64 ii_ilapo_regval; - struct { - u64 i_io_ovrride:64; - } ii_ilapo_fld_s; -} ii_ilapo_u_t; - -/************************************************************************ - * * - * This register qualifies all the PIO and Graphics writes launched * - * from the SHUB towards a widget. * - * * - ************************************************************************/ - -typedef union ii_iowa_u { - u64 ii_iowa_regval; - struct { - u64 i_w0_oac:1; - u64 i_rsvd_1:7; - u64 i_wx_oac:8; - u64 i_rsvd:48; - } ii_iowa_fld_s; -} ii_iowa_u_t; - -/************************************************************************ - * * - * Description: This register qualifies all the requests launched * - * from a widget towards the Shub. This register is intended to be * - * used by software in case of misbehaving widgets. * - * * - * * - ************************************************************************/ - -typedef union ii_iiwa_u { - u64 ii_iiwa_regval; - struct { - u64 i_w0_iac:1; - u64 i_rsvd_1:7; - u64 i_wx_iac:8; - u64 i_rsvd:48; - } ii_iiwa_fld_s; -} ii_iiwa_u_t; - -/************************************************************************ - * * - * Description: This register qualifies all the operations launched * - * from a widget towards the SHub. It allows individual access * - * control for up to 8 devices per widget. A device refers to * - * individual DMA master hosted by a widget. * - * The bits in each field of this register are cleared by the Shub * - * upon detection of an error which requires the device to be * - * disabled. These fields assume that 0=TNUM=7 (i.e., Bridge-centric * - * Crosstalk). Whether or not a device has access rights to this * - * Shub is determined by an AND of the device enable bit in the * - * appropriate field of this register and the corresponding bit in * - * the Wx_IAC field (for the widget which this device belongs to). * - * The bits in this field are set by writing a 1 to them. Incoming * - * replies from Crosstalk are not subject to this access control * - * mechanism. * - * * - ************************************************************************/ - -typedef union ii_iidem_u { - u64 ii_iidem_regval; - struct { - u64 i_w8_dxs:8; - u64 i_w9_dxs:8; - u64 i_wa_dxs:8; - u64 i_wb_dxs:8; - u64 i_wc_dxs:8; - u64 i_wd_dxs:8; - u64 i_we_dxs:8; - u64 i_wf_dxs:8; - } ii_iidem_fld_s; -} ii_iidem_u_t; - -/************************************************************************ - * * - * This register contains the various programmable fields necessary * - * for controlling and observing the LLP signals. * - * * - ************************************************************************/ - -typedef union ii_ilcsr_u { - u64 ii_ilcsr_regval; - struct { - u64 i_nullto:6; - u64 i_rsvd_4:2; - u64 i_wrmrst:1; - u64 i_rsvd_3:1; - u64 i_llp_en:1; - u64 i_bm8:1; - u64 i_llp_stat:2; - u64 i_remote_power:1; - u64 i_rsvd_2:1; - u64 i_maxrtry:10; - u64 i_d_avail_sel:2; - u64 i_rsvd_1:4; - u64 i_maxbrst:10; - u64 i_rsvd:22; - - } ii_ilcsr_fld_s; -} ii_ilcsr_u_t; - -/************************************************************************ - * * - * This is simply a status registers that monitors the LLP error * - * rate. * - * * - ************************************************************************/ - -typedef union ii_illr_u { - u64 ii_illr_regval; - struct { - u64 i_sn_cnt:16; - u64 i_cb_cnt:16; - u64 i_rsvd:32; - } ii_illr_fld_s; -} ii_illr_u_t; - -/************************************************************************ - * * - * Description: All II-detected non-BTE error interrupts are * - * specified via this register. * - * NOTE: The PI interrupt register address is hardcoded in the II. If * - * PI_ID==0, then the II sends an interrupt request (Duplonet PWRI * - * packet) to address offset 0x0180_0090 within the local register * - * address space of PI0 on the node specified by the NODE field. If * - * PI_ID==1, then the II sends the interrupt request to address * - * offset 0x01A0_0090 within the local register address space of PI1 * - * on the node specified by the NODE field. * - * * - ************************************************************************/ - -typedef union ii_iidsr_u { - u64 ii_iidsr_regval; - struct { - u64 i_level:8; - u64 i_pi_id:1; - u64 i_node:11; - u64 i_rsvd_3:4; - u64 i_enable:1; - u64 i_rsvd_2:3; - u64 i_int_sent:2; - u64 i_rsvd_1:2; - u64 i_pi0_forward_int:1; - u64 i_pi1_forward_int:1; - u64 i_rsvd:30; - } ii_iidsr_fld_s; -} ii_iidsr_u_t; - -/************************************************************************ - * * - * There are two instances of this register. This register is used * - * for matching up the incoming responses from the graphics widget to * - * the processor that initiated the graphics operation. The * - * write-responses are converted to graphics credits and returned to * - * the processor so that the processor interface can manage the flow * - * control. * - * * - ************************************************************************/ - -typedef union ii_igfx0_u { - u64 ii_igfx0_regval; - struct { - u64 i_w_num:4; - u64 i_pi_id:1; - u64 i_n_num:12; - u64 i_p_num:1; - u64 i_rsvd:46; - } ii_igfx0_fld_s; -} ii_igfx0_u_t; - -/************************************************************************ - * * - * There are two instances of this register. This register is used * - * for matching up the incoming responses from the graphics widget to * - * the processor that initiated the graphics operation. The * - * write-responses are converted to graphics credits and returned to * - * the processor so that the processor interface can manage the flow * - * control. * - * * - ************************************************************************/ - -typedef union ii_igfx1_u { - u64 ii_igfx1_regval; - struct { - u64 i_w_num:4; - u64 i_pi_id:1; - u64 i_n_num:12; - u64 i_p_num:1; - u64 i_rsvd:46; - } ii_igfx1_fld_s; -} ii_igfx1_u_t; - -/************************************************************************ - * * - * There are two instances of this registers. These registers are * - * used as scratch registers for software use. * - * * - ************************************************************************/ - -typedef union ii_iscr0_u { - u64 ii_iscr0_regval; - struct { - u64 i_scratch:64; - } ii_iscr0_fld_s; -} ii_iscr0_u_t; - -/************************************************************************ - * * - * There are two instances of this registers. These registers are * - * used as scratch registers for software use. * - * * - ************************************************************************/ - -typedef union ii_iscr1_u { - u64 ii_iscr1_regval; - struct { - u64 i_scratch:64; - } ii_iscr1_fld_s; -} ii_iscr1_u_t; - -/************************************************************************ - * * - * Description: There are seven instances of translation table entry * - * registers. Each register maps a Shub Big Window to a 48-bit * - * address on Crosstalk. * - * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * - * number) are used to select one of these 7 registers. The Widget * - * number field is then derived from the W_NUM field for synthesizing * - * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * - * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * - * are padded with zeros. Although the maximum Crosstalk space * - * addressable by the SHub is thus the lower 16 GBytes per widget * - * (M-mode), however only 7/32nds of this * - * space can be accessed. * - * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * - * Window number) are used to select one of these 7 registers. The * - * Widget number field is then derived from the W_NUM field for * - * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * - * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * - * field is used as Crosstalk[47], and remainder of the Crosstalk * - * address bits (Crosstalk[46:34]) are always zero. While the maximum * - * Crosstalk space addressable by the Shub is thus the lower * - * 8-GBytes per widget (N-mode), only 7/32nds * - * of this space can be accessed. * - * * - ************************************************************************/ - -typedef union ii_itte1_u { - u64 ii_itte1_regval; - struct { - u64 i_offset:5; - u64 i_rsvd_1:3; - u64 i_w_num:4; - u64 i_iosp:1; - u64 i_rsvd:51; - } ii_itte1_fld_s; -} ii_itte1_u_t; - -/************************************************************************ - * * - * Description: There are seven instances of translation table entry * - * registers. Each register maps a Shub Big Window to a 48-bit * - * address on Crosstalk. * - * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * - * number) are used to select one of these 7 registers. The Widget * - * number field is then derived from the W_NUM field for synthesizing * - * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * - * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * - * are padded with zeros. Although the maximum Crosstalk space * - * addressable by the Shub is thus the lower 16 GBytes per widget * - * (M-mode), however only 7/32nds of this * - * space can be accessed. * - * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * - * Window number) are used to select one of these 7 registers. The * - * Widget number field is then derived from the W_NUM field for * - * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * - * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * - * field is used as Crosstalk[47], and remainder of the Crosstalk * - * address bits (Crosstalk[46:34]) are always zero. While the maximum * - * Crosstalk space addressable by the Shub is thus the lower * - * 8-GBytes per widget (N-mode), only 7/32nds * - * of this space can be accessed. * - * * - ************************************************************************/ - -typedef union ii_itte2_u { - u64 ii_itte2_regval; - struct { - u64 i_offset:5; - u64 i_rsvd_1:3; - u64 i_w_num:4; - u64 i_iosp:1; - u64 i_rsvd:51; - } ii_itte2_fld_s; -} ii_itte2_u_t; - -/************************************************************************ - * * - * Description: There are seven instances of translation table entry * - * registers. Each register maps a Shub Big Window to a 48-bit * - * address on Crosstalk. * - * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * - * number) are used to select one of these 7 registers. The Widget * - * number field is then derived from the W_NUM field for synthesizing * - * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * - * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * - * are padded with zeros. Although the maximum Crosstalk space * - * addressable by the Shub is thus the lower 16 GBytes per widget * - * (M-mode), however only 7/32nds of this * - * space can be accessed. * - * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * - * Window number) are used to select one of these 7 registers. The * - * Widget number field is then derived from the W_NUM field for * - * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * - * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * - * field is used as Crosstalk[47], and remainder of the Crosstalk * - * address bits (Crosstalk[46:34]) are always zero. While the maximum * - * Crosstalk space addressable by the SHub is thus the lower * - * 8-GBytes per widget (N-mode), only 7/32nds * - * of this space can be accessed. * - * * - ************************************************************************/ - -typedef union ii_itte3_u { - u64 ii_itte3_regval; - struct { - u64 i_offset:5; - u64 i_rsvd_1:3; - u64 i_w_num:4; - u64 i_iosp:1; - u64 i_rsvd:51; - } ii_itte3_fld_s; -} ii_itte3_u_t; - -/************************************************************************ - * * - * Description: There are seven instances of translation table entry * - * registers. Each register maps a SHub Big Window to a 48-bit * - * address on Crosstalk. * - * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * - * number) are used to select one of these 7 registers. The Widget * - * number field is then derived from the W_NUM field for synthesizing * - * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * - * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * - * are padded with zeros. Although the maximum Crosstalk space * - * addressable by the SHub is thus the lower 16 GBytes per widget * - * (M-mode), however only 7/32nds of this * - * space can be accessed. * - * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * - * Window number) are used to select one of these 7 registers. The * - * Widget number field is then derived from the W_NUM field for * - * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * - * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * - * field is used as Crosstalk[47], and remainder of the Crosstalk * - * address bits (Crosstalk[46:34]) are always zero. While the maximum * - * Crosstalk space addressable by the SHub is thus the lower * - * 8-GBytes per widget (N-mode), only 7/32nds * - * of this space can be accessed. * - * * - ************************************************************************/ - -typedef union ii_itte4_u { - u64 ii_itte4_regval; - struct { - u64 i_offset:5; - u64 i_rsvd_1:3; - u64 i_w_num:4; - u64 i_iosp:1; - u64 i_rsvd:51; - } ii_itte4_fld_s; -} ii_itte4_u_t; - -/************************************************************************ - * * - * Description: There are seven instances of translation table entry * - * registers. Each register maps a SHub Big Window to a 48-bit * - * address on Crosstalk. * - * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * - * number) are used to select one of these 7 registers. The Widget * - * number field is then derived from the W_NUM field for synthesizing * - * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * - * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * - * are padded with zeros. Although the maximum Crosstalk space * - * addressable by the Shub is thus the lower 16 GBytes per widget * - * (M-mode), however only 7/32nds of this * - * space can be accessed. * - * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * - * Window number) are used to select one of these 7 registers. The * - * Widget number field is then derived from the W_NUM field for * - * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * - * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * - * field is used as Crosstalk[47], and remainder of the Crosstalk * - * address bits (Crosstalk[46:34]) are always zero. While the maximum * - * Crosstalk space addressable by the Shub is thus the lower * - * 8-GBytes per widget (N-mode), only 7/32nds * - * of this space can be accessed. * - * * - ************************************************************************/ - -typedef union ii_itte5_u { - u64 ii_itte5_regval; - struct { - u64 i_offset:5; - u64 i_rsvd_1:3; - u64 i_w_num:4; - u64 i_iosp:1; - u64 i_rsvd:51; - } ii_itte5_fld_s; -} ii_itte5_u_t; - -/************************************************************************ - * * - * Description: There are seven instances of translation table entry * - * registers. Each register maps a Shub Big Window to a 48-bit * - * address on Crosstalk. * - * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * - * number) are used to select one of these 7 registers. The Widget * - * number field is then derived from the W_NUM field for synthesizing * - * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * - * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * - * are padded with zeros. Although the maximum Crosstalk space * - * addressable by the Shub is thus the lower 16 GBytes per widget * - * (M-mode), however only 7/32nds of this * - * space can be accessed. * - * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * - * Window number) are used to select one of these 7 registers. The * - * Widget number field is then derived from the W_NUM field for * - * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * - * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * - * field is used as Crosstalk[47], and remainder of the Crosstalk * - * address bits (Crosstalk[46:34]) are always zero. While the maximum * - * Crosstalk space addressable by the Shub is thus the lower * - * 8-GBytes per widget (N-mode), only 7/32nds * - * of this space can be accessed. * - * * - ************************************************************************/ - -typedef union ii_itte6_u { - u64 ii_itte6_regval; - struct { - u64 i_offset:5; - u64 i_rsvd_1:3; - u64 i_w_num:4; - u64 i_iosp:1; - u64 i_rsvd:51; - } ii_itte6_fld_s; -} ii_itte6_u_t; - -/************************************************************************ - * * - * Description: There are seven instances of translation table entry * - * registers. Each register maps a Shub Big Window to a 48-bit * - * address on Crosstalk. * - * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * - * number) are used to select one of these 7 registers. The Widget * - * number field is then derived from the W_NUM field for synthesizing * - * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * - * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * - * are padded with zeros. Although the maximum Crosstalk space * - * addressable by the Shub is thus the lower 16 GBytes per widget * - * (M-mode), however only 7/32nds of this * - * space can be accessed. * - * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * - * Window number) are used to select one of these 7 registers. The * - * Widget number field is then derived from the W_NUM field for * - * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * - * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * - * field is used as Crosstalk[47], and remainder of the Crosstalk * - * address bits (Crosstalk[46:34]) are always zero. While the maximum * - * Crosstalk space addressable by the SHub is thus the lower * - * 8-GBytes per widget (N-mode), only 7/32nds * - * of this space can be accessed. * - * * - ************************************************************************/ - -typedef union ii_itte7_u { - u64 ii_itte7_regval; - struct { - u64 i_offset:5; - u64 i_rsvd_1:3; - u64 i_w_num:4; - u64 i_iosp:1; - u64 i_rsvd:51; - } ii_itte7_fld_s; -} ii_itte7_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprb0_u { - u64 ii_iprb0_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprb0_fld_s; -} ii_iprb0_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprb8_u { - u64 ii_iprb8_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprb8_fld_s; -} ii_iprb8_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprb9_u { - u64 ii_iprb9_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprb9_fld_s; -} ii_iprb9_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * * - * * - ************************************************************************/ - -typedef union ii_iprba_u { - u64 ii_iprba_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprba_fld_s; -} ii_iprba_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprbb_u { - u64 ii_iprbb_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprbb_fld_s; -} ii_iprbb_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprbc_u { - u64 ii_iprbc_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprbc_fld_s; -} ii_iprbc_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprbd_u { - u64 ii_iprbd_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprbd_fld_s; -} ii_iprbd_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprbe_u { - u64 ii_iprbe_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprbe_fld_s; -} ii_iprbe_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of Shub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprbf_u { - u64 ii_iprbf_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprbe_fld_s; -} ii_iprbf_u_t; - -/************************************************************************ - * * - * This register specifies the timeout value to use for monitoring * - * Crosstalk credits which are used outbound to Crosstalk. An * - * internal counter called the Crosstalk Credit Timeout Counter * - * increments every 128 II clocks. The counter starts counting * - * anytime the credit count drops below a threshold, and resets to * - * zero (stops counting) anytime the credit count is at or above the * - * threshold. The threshold is 1 credit in direct connect mode and 2 * - * in Crossbow connect mode. When the internal Crosstalk Credit * - * Timeout Counter reaches the value programmed in this register, a * - * Crosstalk Credit Timeout has occurred. The internal counter is not * - * readable from software, and stops counting at its maximum value, * - * so it cannot cause more than one interrupt. * - * * - ************************************************************************/ - -typedef union ii_ixcc_u { - u64 ii_ixcc_regval; - struct { - u64 i_time_out:26; - u64 i_rsvd:38; - } ii_ixcc_fld_s; -} ii_ixcc_u_t; - -/************************************************************************ - * * - * Description: This register qualifies all the PIO and DMA * - * operations launched from widget 0 towards the SHub. In * - * addition, it also qualifies accesses by the BTE streams. * - * The bits in each field of this register are cleared by the SHub * - * upon detection of an error which requires widget 0 or the BTE * - * streams to be terminated. Whether or not widget x has access * - * rights to this SHub is determined by an AND of the device * - * enable bit in the appropriate field of this register and bit 0 in * - * the Wx_IAC field. The bits in this field are set by writing a 1 to * - * them. Incoming replies from Crosstalk are not subject to this * - * access control mechanism. * - * * - ************************************************************************/ - -typedef union ii_imem_u { - u64 ii_imem_regval; - struct { - u64 i_w0_esd:1; - u64 i_rsvd_3:3; - u64 i_b0_esd:1; - u64 i_rsvd_2:3; - u64 i_b1_esd:1; - u64 i_rsvd_1:3; - u64 i_clr_precise:1; - u64 i_rsvd:51; - } ii_imem_fld_s; -} ii_imem_u_t; - -/************************************************************************ - * * - * Description: This register specifies the timeout value to use for * - * monitoring Crosstalk tail flits coming into the Shub in the * - * TAIL_TO field. An internal counter associated with this register * - * is incremented every 128 II internal clocks (7 bits). The counter * - * starts counting anytime a header micropacket is received and stops * - * counting (and resets to zero) any time a micropacket with a Tail * - * bit is received. Once the counter reaches the threshold value * - * programmed in this register, it generates an interrupt to the * - * processor that is programmed into the IIDSR. The counter saturates * - * (does not roll over) at its maximum value, so it cannot cause * - * another interrupt until after it is cleared. * - * The register also contains the Read Response Timeout values. The * - * Prescalar is 23 bits, and counts II clocks. An internal counter * - * increments on every II clock and when it reaches the value in the * - * Prescalar field, all IPRTE registers with their valid bits set * - * have their Read Response timers bumped. Whenever any of them match * - * the value in the RRSP_TO field, a Read Response Timeout has * - * occurred, and error handling occurs as described in the Error * - * Handling section of this document. * - * * - ************************************************************************/ - -typedef union ii_ixtt_u { - u64 ii_ixtt_regval; - struct { - u64 i_tail_to:26; - u64 i_rsvd_1:6; - u64 i_rrsp_ps:23; - u64 i_rrsp_to:5; - u64 i_rsvd:4; - } ii_ixtt_fld_s; -} ii_ixtt_u_t; - -/************************************************************************ - * * - * Writing a 1 to the fields of this register clears the appropriate * - * error bits in other areas of SHub. Note that when the * - * E_PRB_x bits are used to clear error bits in PRB registers, * - * SPUR_RD and SPUR_WR may persist, because they require additional * - * action to clear them. See the IPRBx and IXSS Register * - * specifications. * - * * - ************************************************************************/ - -typedef union ii_ieclr_u { - u64 ii_ieclr_regval; - struct { - u64 i_e_prb_0:1; - u64 i_rsvd:7; - u64 i_e_prb_8:1; - u64 i_e_prb_9:1; - u64 i_e_prb_a:1; - u64 i_e_prb_b:1; - u64 i_e_prb_c:1; - u64 i_e_prb_d:1; - u64 i_e_prb_e:1; - u64 i_e_prb_f:1; - u64 i_e_crazy:1; - u64 i_e_bte_0:1; - u64 i_e_bte_1:1; - u64 i_reserved_1:10; - u64 i_spur_rd_hdr:1; - u64 i_cam_intr_to:1; - u64 i_cam_overflow:1; - u64 i_cam_read_miss:1; - u64 i_ioq_rep_underflow:1; - u64 i_ioq_req_underflow:1; - u64 i_ioq_rep_overflow:1; - u64 i_ioq_req_overflow:1; - u64 i_iiq_rep_overflow:1; - u64 i_iiq_req_overflow:1; - u64 i_ii_xn_rep_cred_overflow:1; - u64 i_ii_xn_req_cred_overflow:1; - u64 i_ii_xn_invalid_cmd:1; - u64 i_xn_ii_invalid_cmd:1; - u64 i_reserved_2:21; - } ii_ieclr_fld_s; -} ii_ieclr_u_t; - -/************************************************************************ - * * - * This register controls both BTEs. SOFT_RESET is intended for * - * recovery after an error. COUNT controls the total number of CRBs * - * that both BTEs (combined) can use, which affects total BTE * - * bandwidth. * - * * - ************************************************************************/ - -typedef union ii_ibcr_u { - u64 ii_ibcr_regval; - struct { - u64 i_count:4; - u64 i_rsvd_1:4; - u64 i_soft_reset:1; - u64 i_rsvd:55; - } ii_ibcr_fld_s; -} ii_ibcr_u_t; - -/************************************************************************ - * * - * This register contains the header of a spurious read response * - * received from Crosstalk. A spurious read response is defined as a * - * read response received by II from a widget for which (1) the SIDN * - * has a value between 1 and 7, inclusive (II never sends requests to * - * these widgets (2) there is no valid IPRTE register which * - * corresponds to the TNUM, or (3) the widget indicated in SIDN is * - * not the same as the widget recorded in the IPRTE register * - * referenced by the TNUM. If this condition is true, and if the * - * IXSS[VALID] bit is clear, then the header of the spurious read * - * response is capture in IXSM and IXSS, and IXSS[VALID] is set. The * - * errant header is thereby captured, and no further spurious read * - * respones are captured until IXSS[VALID] is cleared by setting the * - * appropriate bit in IECLR.Everytime a spurious read response is * - * detected, the SPUR_RD bit of the PRB corresponding to the incoming * - * message's SIDN field is set. This always happens, regarless of * - * whether a header is captured. The programmer should check * - * IXSM[SIDN] to determine which widget sent the spurious response, * - * because there may be more than one SPUR_RD bit set in the PRB * - * registers. The widget indicated by IXSM[SIDN] was the first * - * spurious read response to be received since the last time * - * IXSS[VALID] was clear. The SPUR_RD bit of the corresponding PRB * - * will be set. Any SPUR_RD bits in any other PRB registers indicate * - * spurious messages from other widets which were detected after the * - * header was captured.. * - * * - ************************************************************************/ - -typedef union ii_ixsm_u { - u64 ii_ixsm_regval; - struct { - u64 i_byte_en:32; - u64 i_reserved:1; - u64 i_tag:3; - u64 i_alt_pactyp:4; - u64 i_bo:1; - u64 i_error:1; - u64 i_vbpm:1; - u64 i_gbr:1; - u64 i_ds:2; - u64 i_ct:1; - u64 i_tnum:5; - u64 i_pactyp:4; - u64 i_sidn:4; - u64 i_didn:4; - } ii_ixsm_fld_s; -} ii_ixsm_u_t; - -/************************************************************************ - * * - * This register contains the sideband bits of a spurious read * - * response received from Crosstalk. * - * * - ************************************************************************/ - -typedef union ii_ixss_u { - u64 ii_ixss_regval; - struct { - u64 i_sideband:8; - u64 i_rsvd:55; - u64 i_valid:1; - } ii_ixss_fld_s; -} ii_ixss_u_t; - -/************************************************************************ - * * - * This register enables software to access the II LLP's test port. * - * Refer to the LLP 2.5 documentation for an explanation of the test * - * port. Software can write to this register to program the values * - * for the control fields (TestErrCapture, TestClear, TestFlit, * - * TestMask and TestSeed). Similarly, software can read from this * - * register to obtain the values of the test port's status outputs * - * (TestCBerr, TestValid and TestData). * - * * - ************************************************************************/ - -typedef union ii_ilct_u { - u64 ii_ilct_regval; - struct { - u64 i_test_seed:20; - u64 i_test_mask:8; - u64 i_test_data:20; - u64 i_test_valid:1; - u64 i_test_cberr:1; - u64 i_test_flit:3; - u64 i_test_clear:1; - u64 i_test_err_capture:1; - u64 i_rsvd:9; - } ii_ilct_fld_s; -} ii_ilct_u_t; - -/************************************************************************ - * * - * If the II detects an illegal incoming Duplonet packet (request or * - * reply) when VALID==0 in the IIEPH1 register, then it saves the * - * contents of the packet's header flit in the IIEPH1 and IIEPH2 * - * registers, sets the VALID bit in IIEPH1, clears the OVERRUN bit, * - * and assigns a value to the ERR_TYPE field which indicates the * - * specific nature of the error. The II recognizes four different * - * types of errors: short request packets (ERR_TYPE==2), short reply * - * packets (ERR_TYPE==3), long request packets (ERR_TYPE==4) and long * - * reply packets (ERR_TYPE==5). The encodings for these types of * - * errors were chosen to be consistent with the same types of errors * - * indicated by the ERR_TYPE field in the LB_ERROR_HDR1 register (in * - * the LB unit). If the II detects an illegal incoming Duplonet * - * packet when VALID==1 in the IIEPH1 register, then it merely sets * - * the OVERRUN bit to indicate that a subsequent error has happened, * - * and does nothing further. * - * * - ************************************************************************/ - -typedef union ii_iieph1_u { - u64 ii_iieph1_regval; - struct { - u64 i_command:7; - u64 i_rsvd_5:1; - u64 i_suppl:14; - u64 i_rsvd_4:1; - u64 i_source:14; - u64 i_rsvd_3:1; - u64 i_err_type:4; - u64 i_rsvd_2:4; - u64 i_overrun:1; - u64 i_rsvd_1:3; - u64 i_valid:1; - u64 i_rsvd:13; - } ii_iieph1_fld_s; -} ii_iieph1_u_t; - -/************************************************************************ - * * - * This register holds the Address field from the header flit of an * - * incoming erroneous Duplonet packet, along with the tail bit which * - * accompanied this header flit. This register is essentially an * - * extension of IIEPH1. Two registers were necessary because the 64 * - * bits available in only a single register were insufficient to * - * capture the entire header flit of an erroneous packet. * - * * - ************************************************************************/ - -typedef union ii_iieph2_u { - u64 ii_iieph2_regval; - struct { - u64 i_rsvd_0:3; - u64 i_address:47; - u64 i_rsvd_1:10; - u64 i_tail:1; - u64 i_rsvd:3; - } ii_iieph2_fld_s; -} ii_iieph2_u_t; - -/******************************/ - -/************************************************************************ - * * - * This register's value is a bit vector that guards access from SXBs * - * to local registers within the II as well as to external Crosstalk * - * widgets * - * * - ************************************************************************/ - -typedef union ii_islapr_u { - u64 ii_islapr_regval; - struct { - u64 i_region:64; - } ii_islapr_fld_s; -} ii_islapr_u_t; - -/************************************************************************ - * * - * A write to this register of the 56-bit value "Pup+Bun" will cause * - * the bit in the ISLAPR register corresponding to the region of the * - * requestor to be set (access allowed). ( - * * - ************************************************************************/ - -typedef union ii_islapo_u { - u64 ii_islapo_regval; - struct { - u64 i_io_sbx_ovrride:56; - u64 i_rsvd:8; - } ii_islapo_fld_s; -} ii_islapo_u_t; - -/************************************************************************ - * * - * Determines how long the wrapper will wait aftr an interrupt is * - * initially issued from the II before it times out the outstanding * - * interrupt and drops it from the interrupt queue. * - * * - ************************************************************************/ - -typedef union ii_iwi_u { - u64 ii_iwi_regval; - struct { - u64 i_prescale:24; - u64 i_rsvd:8; - u64 i_timeout:8; - u64 i_rsvd1:8; - u64 i_intrpt_retry_period:8; - u64 i_rsvd2:8; - } ii_iwi_fld_s; -} ii_iwi_u_t; - -/************************************************************************ - * * - * Log errors which have occurred in the II wrapper. The errors are * - * cleared by writing to the IECLR register. * - * * - ************************************************************************/ - -typedef union ii_iwel_u { - u64 ii_iwel_regval; - struct { - u64 i_intr_timed_out:1; - u64 i_rsvd:7; - u64 i_cam_overflow:1; - u64 i_cam_read_miss:1; - u64 i_rsvd1:2; - u64 i_ioq_rep_underflow:1; - u64 i_ioq_req_underflow:1; - u64 i_ioq_rep_overflow:1; - u64 i_ioq_req_overflow:1; - u64 i_iiq_rep_overflow:1; - u64 i_iiq_req_overflow:1; - u64 i_rsvd2:6; - u64 i_ii_xn_rep_cred_over_under:1; - u64 i_ii_xn_req_cred_over_under:1; - u64 i_rsvd3:6; - u64 i_ii_xn_invalid_cmd:1; - u64 i_xn_ii_invalid_cmd:1; - u64 i_rsvd4:30; - } ii_iwel_fld_s; -} ii_iwel_u_t; - -/************************************************************************ - * * - * Controls the II wrapper. * - * * - ************************************************************************/ - -typedef union ii_iwc_u { - u64 ii_iwc_regval; - struct { - u64 i_dma_byte_swap:1; - u64 i_rsvd:3; - u64 i_cam_read_lines_reset:1; - u64 i_rsvd1:3; - u64 i_ii_xn_cred_over_under_log:1; - u64 i_rsvd2:19; - u64 i_xn_rep_iq_depth:5; - u64 i_rsvd3:3; - u64 i_xn_req_iq_depth:5; - u64 i_rsvd4:3; - u64 i_iiq_depth:6; - u64 i_rsvd5:12; - u64 i_force_rep_cred:1; - u64 i_force_req_cred:1; - } ii_iwc_fld_s; -} ii_iwc_u_t; - -/************************************************************************ - * * - * Status in the II wrapper. * - * * - ************************************************************************/ - -typedef union ii_iws_u { - u64 ii_iws_regval; - struct { - u64 i_xn_rep_iq_credits:5; - u64 i_rsvd:3; - u64 i_xn_req_iq_credits:5; - u64 i_rsvd1:51; - } ii_iws_fld_s; -} ii_iws_u_t; - -/************************************************************************ - * * - * Masks errors in the IWEL register. * - * * - ************************************************************************/ - -typedef union ii_iweim_u { - u64 ii_iweim_regval; - struct { - u64 i_intr_timed_out:1; - u64 i_rsvd:7; - u64 i_cam_overflow:1; - u64 i_cam_read_miss:1; - u64 i_rsvd1:2; - u64 i_ioq_rep_underflow:1; - u64 i_ioq_req_underflow:1; - u64 i_ioq_rep_overflow:1; - u64 i_ioq_req_overflow:1; - u64 i_iiq_rep_overflow:1; - u64 i_iiq_req_overflow:1; - u64 i_rsvd2:6; - u64 i_ii_xn_rep_cred_overflow:1; - u64 i_ii_xn_req_cred_overflow:1; - u64 i_rsvd3:6; - u64 i_ii_xn_invalid_cmd:1; - u64 i_xn_ii_invalid_cmd:1; - u64 i_rsvd4:30; - } ii_iweim_fld_s; -} ii_iweim_u_t; - -/************************************************************************ - * * - * A write to this register causes a particular field in the * - * corresponding widget's PRB entry to be adjusted up or down by 1. * - * This counter should be used when recovering from error and reset * - * conditions. Note that software would be capable of causing * - * inadvertent overflow or underflow of these counters. * - * * - ************************************************************************/ - -typedef union ii_ipca_u { - u64 ii_ipca_regval; - struct { - u64 i_wid:4; - u64 i_adjust:1; - u64 i_rsvd_1:3; - u64 i_field:2; - u64 i_rsvd:54; - } ii_ipca_fld_s; -} ii_ipca_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte0a_u { - u64 ii_iprte0a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprte0a_fld_s; -} ii_iprte0a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte1a_u { - u64 ii_iprte1a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprte1a_fld_s; -} ii_iprte1a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte2a_u { - u64 ii_iprte2a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprte2a_fld_s; -} ii_iprte2a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte3a_u { - u64 ii_iprte3a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprte3a_fld_s; -} ii_iprte3a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte4a_u { - u64 ii_iprte4a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprte4a_fld_s; -} ii_iprte4a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte5a_u { - u64 ii_iprte5a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprte5a_fld_s; -} ii_iprte5a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte6a_u { - u64 ii_iprte6a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprte6a_fld_s; -} ii_iprte6a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte7a_u { - u64 ii_iprte7a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprtea7_fld_s; -} ii_iprte7a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte0b_u { - u64 ii_iprte0b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - } ii_iprte0b_fld_s; -} ii_iprte0b_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte1b_u { - u64 ii_iprte1b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - } ii_iprte1b_fld_s; -} ii_iprte1b_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte2b_u { - u64 ii_iprte2b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - } ii_iprte2b_fld_s; -} ii_iprte2b_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte3b_u { - u64 ii_iprte3b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - } ii_iprte3b_fld_s; -} ii_iprte3b_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte4b_u { - u64 ii_iprte4b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - } ii_iprte4b_fld_s; -} ii_iprte4b_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte5b_u { - u64 ii_iprte5b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - } ii_iprte5b_fld_s; -} ii_iprte5b_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte6b_u { - u64 ii_iprte6b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - - } ii_iprte6b_fld_s; -} ii_iprte6b_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte7b_u { - u64 ii_iprte7b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - } ii_iprte7b_fld_s; -} ii_iprte7b_u_t; - -/************************************************************************ - * * - * Description: SHub II contains a feature which did not exist in * - * the Hub which automatically cleans up after a Read Response * - * timeout, including deallocation of the IPRTE and recovery of IBuf * - * space. The inclusion of this register in SHub is for backward * - * compatibility * - * A write to this register causes an entry from the table of * - * outstanding PIO Read Requests to be freed and returned to the * - * stack of free entries. This register is used in handling the * - * timeout errors that result in a PIO Reply never returning from * - * Crosstalk. * - * Note that this register does not affect the contents of the IPRTE * - * registers. The Valid bits in those registers have to be * - * specifically turned off by software. * - * * - ************************************************************************/ - -typedef union ii_ipdr_u { - u64 ii_ipdr_regval; - struct { - u64 i_te:3; - u64 i_rsvd_1:1; - u64 i_pnd:1; - u64 i_init_rpcnt:1; - u64 i_rsvd:58; - } ii_ipdr_fld_s; -} ii_ipdr_u_t; - -/************************************************************************ - * * - * A write to this register causes a CRB entry to be returned to the * - * queue of free CRBs. The entry should have previously been cleared * - * (mark bit) via backdoor access to the pertinent CRB entry. This * - * register is used in the last step of handling the errors that are * - * captured and marked in CRB entries. Briefly: 1) first error for * - * DMA write from a particular device, and first error for a * - * particular BTE stream, lead to a marked CRB entry, and processor * - * interrupt, 2) software reads the error information captured in the * - * CRB entry, and presumably takes some corrective action, 3) * - * software clears the mark bit, and finally 4) software writes to * - * the ICDR register to return the CRB entry to the list of free CRB * - * entries. * - * * - ************************************************************************/ - -typedef union ii_icdr_u { - u64 ii_icdr_regval; - struct { - u64 i_crb_num:4; - u64 i_pnd:1; - u64 i_rsvd:59; - } ii_icdr_fld_s; -} ii_icdr_u_t; - -/************************************************************************ - * * - * This register provides debug access to two FIFOs inside of II. * - * Both IOQ_MAX* fields of this register contain the instantaneous * - * depth (in units of the number of available entries) of the * - * associated IOQ FIFO. A read of this register will return the * - * number of free entries on each FIFO at the time of the read. So * - * when a FIFO is idle, the associated field contains the maximum * - * depth of the FIFO. This register is writable for debug reasons * - * and is intended to be written with the maximum desired FIFO depth * - * while the FIFO is idle. Software must assure that II is idle when * - * this register is written. If there are any active entries in any * - * of these FIFOs when this register is written, the results are * - * undefined. * - * * - ************************************************************************/ - -typedef union ii_ifdr_u { - u64 ii_ifdr_regval; - struct { - u64 i_ioq_max_rq:7; - u64 i_set_ioq_rq:1; - u64 i_ioq_max_rp:7; - u64 i_set_ioq_rp:1; - u64 i_rsvd:48; - } ii_ifdr_fld_s; -} ii_ifdr_u_t; - -/************************************************************************ - * * - * This register allows the II to become sluggish in removing * - * messages from its inbound queue (IIQ). This will cause messages to * - * back up in either virtual channel. Disabling the "molasses" mode * - * subsequently allows the II to be tested under stress. In the * - * sluggish ("Molasses") mode, the localized effects of congestion * - * can be observed. * - * * - ************************************************************************/ - -typedef union ii_iiap_u { - u64 ii_iiap_regval; - struct { - u64 i_rq_mls:6; - u64 i_rsvd_1:2; - u64 i_rp_mls:6; - u64 i_rsvd:50; - } ii_iiap_fld_s; -} ii_iiap_u_t; - -/************************************************************************ - * * - * This register allows several parameters of CRB operation to be * - * set. Note that writing to this register can have catastrophic side * - * effects, if the CRB is not quiescent, i.e. if the CRB is * - * processing protocol messages when the write occurs. * - * * - ************************************************************************/ - -typedef union ii_icmr_u { - u64 ii_icmr_regval; - struct { - u64 i_sp_msg:1; - u64 i_rd_hdr:1; - u64 i_rsvd_4:2; - u64 i_c_cnt:4; - u64 i_rsvd_3:4; - u64 i_clr_rqpd:1; - u64 i_clr_rppd:1; - u64 i_rsvd_2:2; - u64 i_fc_cnt:4; - u64 i_crb_vld:15; - u64 i_crb_mark:15; - u64 i_rsvd_1:2; - u64 i_precise:1; - u64 i_rsvd:11; - } ii_icmr_fld_s; -} ii_icmr_u_t; - -/************************************************************************ - * * - * This register allows control of the table portion of the CRB * - * logic via software. Control operations from this register have * - * priority over all incoming Crosstalk or BTE requests. * - * * - ************************************************************************/ - -typedef union ii_iccr_u { - u64 ii_iccr_regval; - struct { - u64 i_crb_num:4; - u64 i_rsvd_1:4; - u64 i_cmd:8; - u64 i_pending:1; - u64 i_rsvd:47; - } ii_iccr_fld_s; -} ii_iccr_u_t; - -/************************************************************************ - * * - * This register allows the maximum timeout value to be programmed. * - * * - ************************************************************************/ - -typedef union ii_icto_u { - u64 ii_icto_regval; - struct { - u64 i_timeout:8; - u64 i_rsvd:56; - } ii_icto_fld_s; -} ii_icto_u_t; - -/************************************************************************ - * * - * This register allows the timeout prescalar to be programmed. An * - * internal counter is associated with this register. When the * - * internal counter reaches the value of the PRESCALE field, the * - * timer registers in all valid CRBs are incremented (CRBx_D[TIMEOUT] * - * field). The internal counter resets to zero, and then continues * - * counting. * - * * - ************************************************************************/ - -typedef union ii_ictp_u { - u64 ii_ictp_regval; - struct { - u64 i_prescale:24; - u64 i_rsvd:40; - } ii_ictp_fld_s; -} ii_ictp_u_t; - -/************************************************************************ - * * - * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * - * used for Crosstalk operations (both cacheline and partial * - * operations) or BTE/IO. Because the CRB entries are very wide, five * - * registers (_A to _E) are required to read and write each entry. * - * The CRB Entry registers can be conceptualized as rows and columns * - * (illustrated in the table above). Each row contains the 4 * - * registers required for a single CRB Entry. The first doubleword * - * (column) for each entry is labeled A, and the second doubleword * - * (higher address) is labeled B, the third doubleword is labeled C, * - * the fourth doubleword is labeled D and the fifth doubleword is * - * labeled E. All CRB entries have their addresses on a quarter * - * cacheline aligned boundary. * - * Upon reset, only the following fields are initialized: valid * - * (VLD), priority count, timeout, timeout valid, and context valid. * - * All other bits should be cleared by software before use (after * - * recovering any potential error state from before the reset). * - * The following four tables summarize the format for the four * - * registers that are used for each ICRB# Entry. * - * * - ************************************************************************/ - -typedef union ii_icrb0_a_u { - u64 ii_icrb0_a_regval; - struct { - u64 ia_iow:1; - u64 ia_vld:1; - u64 ia_addr:47; - u64 ia_tnum:5; - u64 ia_sidn:4; - u64 ia_rsvd:6; - } ii_icrb0_a_fld_s; -} ii_icrb0_a_u_t; - -/************************************************************************ - * * - * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * - * used for Crosstalk operations (both cacheline and partial * - * operations) or BTE/IO. Because the CRB entries are very wide, five * - * registers (_A to _E) are required to read and write each entry. * - * * - ************************************************************************/ - -typedef union ii_icrb0_b_u { - u64 ii_icrb0_b_regval; - struct { - u64 ib_xt_err:1; - u64 ib_mark:1; - u64 ib_ln_uce:1; - u64 ib_errcode:3; - u64 ib_error:1; - u64 ib_stall__bte_1:1; - u64 ib_stall__bte_0:1; - u64 ib_stall__intr:1; - u64 ib_stall_ib:1; - u64 ib_intvn:1; - u64 ib_wb:1; - u64 ib_hold:1; - u64 ib_ack:1; - u64 ib_resp:1; - u64 ib_ack_cnt:11; - u64 ib_rsvd:7; - u64 ib_exc:5; - u64 ib_init:3; - u64 ib_imsg:8; - u64 ib_imsgtype:2; - u64 ib_use_old:1; - u64 ib_rsvd_1:11; - } ii_icrb0_b_fld_s; -} ii_icrb0_b_u_t; - -/************************************************************************ - * * - * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * - * used for Crosstalk operations (both cacheline and partial * - * operations) or BTE/IO. Because the CRB entries are very wide, five * - * registers (_A to _E) are required to read and write each entry. * - * * - ************************************************************************/ - -typedef union ii_icrb0_c_u { - u64 ii_icrb0_c_regval; - struct { - u64 ic_source:15; - u64 ic_size:2; - u64 ic_ct:1; - u64 ic_bte_num:1; - u64 ic_gbr:1; - u64 ic_resprqd:1; - u64 ic_bo:1; - u64 ic_suppl:15; - u64 ic_rsvd:27; - } ii_icrb0_c_fld_s; -} ii_icrb0_c_u_t; - -/************************************************************************ - * * - * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * - * used for Crosstalk operations (both cacheline and partial * - * operations) or BTE/IO. Because the CRB entries are very wide, five * - * registers (_A to _E) are required to read and write each entry. * - * * - ************************************************************************/ - -typedef union ii_icrb0_d_u { - u64 ii_icrb0_d_regval; - struct { - u64 id_pa_be:43; - u64 id_bte_op:1; - u64 id_pr_psc:4; - u64 id_pr_cnt:4; - u64 id_sleep:1; - u64 id_rsvd:11; - } ii_icrb0_d_fld_s; -} ii_icrb0_d_u_t; - -/************************************************************************ - * * - * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * - * used for Crosstalk operations (both cacheline and partial * - * operations) or BTE/IO. Because the CRB entries are very wide, five * - * registers (_A to _E) are required to read and write each entry. * - * * - ************************************************************************/ - -typedef union ii_icrb0_e_u { - u64 ii_icrb0_e_regval; - struct { - u64 ie_timeout:8; - u64 ie_context:15; - u64 ie_rsvd:1; - u64 ie_tvld:1; - u64 ie_cvld:1; - u64 ie_rsvd_0:38; - } ii_icrb0_e_fld_s; -} ii_icrb0_e_u_t; - -/************************************************************************ - * * - * This register contains the lower 64 bits of the header of the * - * spurious message captured by II. Valid when the SP_MSG bit in ICMR * - * register is set. * - * * - ************************************************************************/ - -typedef union ii_icsml_u { - u64 ii_icsml_regval; - struct { - u64 i_tt_addr:47; - u64 i_newsuppl_ex:14; - u64 i_reserved:2; - u64 i_overflow:1; - } ii_icsml_fld_s; -} ii_icsml_u_t; - -/************************************************************************ - * * - * This register contains the middle 64 bits of the header of the * - * spurious message captured by II. Valid when the SP_MSG bit in ICMR * - * register is set. * - * * - ************************************************************************/ - -typedef union ii_icsmm_u { - u64 ii_icsmm_regval; - struct { - u64 i_tt_ack_cnt:11; - u64 i_reserved:53; - } ii_icsmm_fld_s; -} ii_icsmm_u_t; - -/************************************************************************ - * * - * This register contains the microscopic state, all the inputs to * - * the protocol table, captured with the spurious message. Valid when * - * the SP_MSG bit in the ICMR register is set. * - * * - ************************************************************************/ - -typedef union ii_icsmh_u { - u64 ii_icsmh_regval; - struct { - u64 i_tt_vld:1; - u64 i_xerr:1; - u64 i_ft_cwact_o:1; - u64 i_ft_wact_o:1; - u64 i_ft_active_o:1; - u64 i_sync:1; - u64 i_mnusg:1; - u64 i_mnusz:1; - u64 i_plusz:1; - u64 i_plusg:1; - u64 i_tt_exc:5; - u64 i_tt_wb:1; - u64 i_tt_hold:1; - u64 i_tt_ack:1; - u64 i_tt_resp:1; - u64 i_tt_intvn:1; - u64 i_g_stall_bte1:1; - u64 i_g_stall_bte0:1; - u64 i_g_stall_il:1; - u64 i_g_stall_ib:1; - u64 i_tt_imsg:8; - u64 i_tt_imsgtype:2; - u64 i_tt_use_old:1; - u64 i_tt_respreqd:1; - u64 i_tt_bte_num:1; - u64 i_cbn:1; - u64 i_match:1; - u64 i_rpcnt_lt_34:1; - u64 i_rpcnt_ge_34:1; - u64 i_rpcnt_lt_18:1; - u64 i_rpcnt_ge_18:1; - u64 i_rpcnt_lt_2:1; - u64 i_rpcnt_ge_2:1; - u64 i_rqcnt_lt_18:1; - u64 i_rqcnt_ge_18:1; - u64 i_rqcnt_lt_2:1; - u64 i_rqcnt_ge_2:1; - u64 i_tt_device:7; - u64 i_tt_init:3; - u64 i_reserved:5; - } ii_icsmh_fld_s; -} ii_icsmh_u_t; - -/************************************************************************ - * * - * The Shub DEBUG unit provides a 3-bit selection signal to the * - * II core and a 3-bit selection signal to the fsbclk domain in the II * - * wrapper. * - * * - ************************************************************************/ - -typedef union ii_idbss_u { - u64 ii_idbss_regval; - struct { - u64 i_iioclk_core_submenu:3; - u64 i_rsvd:5; - u64 i_fsbclk_wrapper_submenu:3; - u64 i_rsvd_1:5; - u64 i_iioclk_menu:5; - u64 i_rsvd_2:43; - } ii_idbss_fld_s; -} ii_idbss_u_t; - -/************************************************************************ - * * - * Description: This register is used to set up the length for a * - * transfer and then to monitor the progress of that transfer. This * - * register needs to be initialized before a transfer is started. A * - * legitimate write to this register will set the Busy bit, clear the * - * Error bit, and initialize the length to the value desired. * - * While the transfer is in progress, hardware will decrement the * - * length field with each successful block that is copied. Once the * - * transfer completes, hardware will clear the Busy bit. The length * - * field will also contain the number of cache lines left to be * - * transferred. * - * * - ************************************************************************/ - -typedef union ii_ibls0_u { - u64 ii_ibls0_regval; - struct { - u64 i_length:16; - u64 i_error:1; - u64 i_rsvd_1:3; - u64 i_busy:1; - u64 i_rsvd:43; - } ii_ibls0_fld_s; -} ii_ibls0_u_t; - -/************************************************************************ - * * - * This register should be loaded before a transfer is started. The * - * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * - * address as described in Section 1.3, Figure2 and Figure3. Since * - * the bottom 7 bits of the address are always taken to be zero, BTE * - * transfers are always cacheline-aligned. * - * * - ************************************************************************/ - -typedef union ii_ibsa0_u { - u64 ii_ibsa0_regval; - struct { - u64 i_rsvd_1:7; - u64 i_addr:42; - u64 i_rsvd:15; - } ii_ibsa0_fld_s; -} ii_ibsa0_u_t; - -/************************************************************************ - * * - * This register should be loaded before a transfer is started. The * - * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * - * address as described in Section 1.3, Figure2 and Figure3. Since * - * the bottom 7 bits of the address are always taken to be zero, BTE * - * transfers are always cacheline-aligned. * - * * - ************************************************************************/ - -typedef union ii_ibda0_u { - u64 ii_ibda0_regval; - struct { - u64 i_rsvd_1:7; - u64 i_addr:42; - u64 i_rsvd:15; - } ii_ibda0_fld_s; -} ii_ibda0_u_t; - -/************************************************************************ - * * - * Writing to this register sets up the attributes of the transfer * - * and initiates the transfer operation. Reading this register has * - * the side effect of terminating any transfer in progress. Note: * - * stopping a transfer midstream could have an adverse impact on the * - * other BTE. If a BTE stream has to be stopped (due to error * - * handling for example), both BTE streams should be stopped and * - * their transfers discarded. * - * * - ************************************************************************/ - -typedef union ii_ibct0_u { - u64 ii_ibct0_regval; - struct { - u64 i_zerofill:1; - u64 i_rsvd_2:3; - u64 i_notify:1; - u64 i_rsvd_1:3; - u64 i_poison:1; - u64 i_rsvd:55; - } ii_ibct0_fld_s; -} ii_ibct0_u_t; - -/************************************************************************ - * * - * This register contains the address to which the WINV is sent. * - * This address has to be cache line aligned. * - * * - ************************************************************************/ - -typedef union ii_ibna0_u { - u64 ii_ibna0_regval; - struct { - u64 i_rsvd_1:7; - u64 i_addr:42; - u64 i_rsvd:15; - } ii_ibna0_fld_s; -} ii_ibna0_u_t; - -/************************************************************************ - * * - * This register contains the programmable level as well as the node * - * ID and PI unit of the processor to which the interrupt will be * - * sent. * - * * - ************************************************************************/ - -typedef union ii_ibia0_u { - u64 ii_ibia0_regval; - struct { - u64 i_rsvd_2:1; - u64 i_node_id:11; - u64 i_rsvd_1:4; - u64 i_level:7; - u64 i_rsvd:41; - } ii_ibia0_fld_s; -} ii_ibia0_u_t; - -/************************************************************************ - * * - * Description: This register is used to set up the length for a * - * transfer and then to monitor the progress of that transfer. This * - * register needs to be initialized before a transfer is started. A * - * legitimate write to this register will set the Busy bit, clear the * - * Error bit, and initialize the length to the value desired. * - * While the transfer is in progress, hardware will decrement the * - * length field with each successful block that is copied. Once the * - * transfer completes, hardware will clear the Busy bit. The length * - * field will also contain the number of cache lines left to be * - * transferred. * - * * - ************************************************************************/ - -typedef union ii_ibls1_u { - u64 ii_ibls1_regval; - struct { - u64 i_length:16; - u64 i_error:1; - u64 i_rsvd_1:3; - u64 i_busy:1; - u64 i_rsvd:43; - } ii_ibls1_fld_s; -} ii_ibls1_u_t; - -/************************************************************************ - * * - * This register should be loaded before a transfer is started. The * - * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * - * address as described in Section 1.3, Figure2 and Figure3. Since * - * the bottom 7 bits of the address are always taken to be zero, BTE * - * transfers are always cacheline-aligned. * - * * - ************************************************************************/ - -typedef union ii_ibsa1_u { - u64 ii_ibsa1_regval; - struct { - u64 i_rsvd_1:7; - u64 i_addr:33; - u64 i_rsvd:24; - } ii_ibsa1_fld_s; -} ii_ibsa1_u_t; - -/************************************************************************ - * * - * This register should be loaded before a transfer is started. The * - * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * - * address as described in Section 1.3, Figure2 and Figure3. Since * - * the bottom 7 bits of the address are always taken to be zero, BTE * - * transfers are always cacheline-aligned. * - * * - ************************************************************************/ - -typedef union ii_ibda1_u { - u64 ii_ibda1_regval; - struct { - u64 i_rsvd_1:7; - u64 i_addr:33; - u64 i_rsvd:24; - } ii_ibda1_fld_s; -} ii_ibda1_u_t; - -/************************************************************************ - * * - * Writing to this register sets up the attributes of the transfer * - * and initiates the transfer operation. Reading this register has * - * the side effect of terminating any transfer in progress. Note: * - * stopping a transfer midstream could have an adverse impact on the * - * other BTE. If a BTE stream has to be stopped (due to error * - * handling for example), both BTE streams should be stopped and * - * their transfers discarded. * - * * - ************************************************************************/ - -typedef union ii_ibct1_u { - u64 ii_ibct1_regval; - struct { - u64 i_zerofill:1; - u64 i_rsvd_2:3; - u64 i_notify:1; - u64 i_rsvd_1:3; - u64 i_poison:1; - u64 i_rsvd:55; - } ii_ibct1_fld_s; -} ii_ibct1_u_t; - -/************************************************************************ - * * - * This register contains the address to which the WINV is sent. * - * This address has to be cache line aligned. * - * * - ************************************************************************/ - -typedef union ii_ibna1_u { - u64 ii_ibna1_regval; - struct { - u64 i_rsvd_1:7; - u64 i_addr:33; - u64 i_rsvd:24; - } ii_ibna1_fld_s; -} ii_ibna1_u_t; - -/************************************************************************ - * * - * This register contains the programmable level as well as the node * - * ID and PI unit of the processor to which the interrupt will be * - * sent. * - * * - ************************************************************************/ - -typedef union ii_ibia1_u { - u64 ii_ibia1_regval; - struct { - u64 i_pi_id:1; - u64 i_node_id:8; - u64 i_rsvd_1:7; - u64 i_level:7; - u64 i_rsvd:41; - } ii_ibia1_fld_s; -} ii_ibia1_u_t; - -/************************************************************************ - * * - * This register defines the resources that feed information into * - * the two performance counters located in the IO Performance * - * Profiling Register. There are 17 different quantities that can be * - * measured. Given these 17 different options, the two performance * - * counters have 15 of them in common; menu selections 0 through 0xE * - * are identical for each performance counter. As for the other two * - * options, one is available from one performance counter and the * - * other is available from the other performance counter. Hence, the * - * II supports all 17*16=272 possible combinations of quantities to * - * measure. * - * * - ************************************************************************/ - -typedef union ii_ipcr_u { - u64 ii_ipcr_regval; - struct { - u64 i_ippr0_c:4; - u64 i_ippr1_c:4; - u64 i_icct:8; - u64 i_rsvd:48; - } ii_ipcr_fld_s; -} ii_ipcr_u_t; - -/************************************************************************ - * * - * * - * * - ************************************************************************/ - -typedef union ii_ippr_u { - u64 ii_ippr_regval; - struct { - u64 i_ippr0:32; - u64 i_ippr1:32; - } ii_ippr_fld_s; -} ii_ippr_u_t; - -/************************************************************************ - * * - * The following defines which were not formed into structures are * - * probably indentical to another register, and the name of the * - * register is provided against each of these registers. This * - * information needs to be checked carefully * - * * - * IIO_ICRB1_A IIO_ICRB0_A * - * IIO_ICRB1_B IIO_ICRB0_B * - * IIO_ICRB1_C IIO_ICRB0_C * - * IIO_ICRB1_D IIO_ICRB0_D * - * IIO_ICRB1_E IIO_ICRB0_E * - * IIO_ICRB2_A IIO_ICRB0_A * - * IIO_ICRB2_B IIO_ICRB0_B * - * IIO_ICRB2_C IIO_ICRB0_C * - * IIO_ICRB2_D IIO_ICRB0_D * - * IIO_ICRB2_E IIO_ICRB0_E * - * IIO_ICRB3_A IIO_ICRB0_A * - * IIO_ICRB3_B IIO_ICRB0_B * - * IIO_ICRB3_C IIO_ICRB0_C * - * IIO_ICRB3_D IIO_ICRB0_D * - * IIO_ICRB3_E IIO_ICRB0_E * - * IIO_ICRB4_A IIO_ICRB0_A * - * IIO_ICRB4_B IIO_ICRB0_B * - * IIO_ICRB4_C IIO_ICRB0_C * - * IIO_ICRB4_D IIO_ICRB0_D * - * IIO_ICRB4_E IIO_ICRB0_E * - * IIO_ICRB5_A IIO_ICRB0_A * - * IIO_ICRB5_B IIO_ICRB0_B * - * IIO_ICRB5_C IIO_ICRB0_C * - * IIO_ICRB5_D IIO_ICRB0_D * - * IIO_ICRB5_E IIO_ICRB0_E * - * IIO_ICRB6_A IIO_ICRB0_A * - * IIO_ICRB6_B IIO_ICRB0_B * - * IIO_ICRB6_C IIO_ICRB0_C * - * IIO_ICRB6_D IIO_ICRB0_D * - * IIO_ICRB6_E IIO_ICRB0_E * - * IIO_ICRB7_A IIO_ICRB0_A * - * IIO_ICRB7_B IIO_ICRB0_B * - * IIO_ICRB7_C IIO_ICRB0_C * - * IIO_ICRB7_D IIO_ICRB0_D * - * IIO_ICRB7_E IIO_ICRB0_E * - * IIO_ICRB8_A IIO_ICRB0_A * - * IIO_ICRB8_B IIO_ICRB0_B * - * IIO_ICRB8_C IIO_ICRB0_C * - * IIO_ICRB8_D IIO_ICRB0_D * - * IIO_ICRB8_E IIO_ICRB0_E * - * IIO_ICRB9_A IIO_ICRB0_A * - * IIO_ICRB9_B IIO_ICRB0_B * - * IIO_ICRB9_C IIO_ICRB0_C * - * IIO_ICRB9_D IIO_ICRB0_D * - * IIO_ICRB9_E IIO_ICRB0_E * - * IIO_ICRBA_A IIO_ICRB0_A * - * IIO_ICRBA_B IIO_ICRB0_B * - * IIO_ICRBA_C IIO_ICRB0_C * - * IIO_ICRBA_D IIO_ICRB0_D * - * IIO_ICRBA_E IIO_ICRB0_E * - * IIO_ICRBB_A IIO_ICRB0_A * - * IIO_ICRBB_B IIO_ICRB0_B * - * IIO_ICRBB_C IIO_ICRB0_C * - * IIO_ICRBB_D IIO_ICRB0_D * - * IIO_ICRBB_E IIO_ICRB0_E * - * IIO_ICRBC_A IIO_ICRB0_A * - * IIO_ICRBC_B IIO_ICRB0_B * - * IIO_ICRBC_C IIO_ICRB0_C * - * IIO_ICRBC_D IIO_ICRB0_D * - * IIO_ICRBC_E IIO_ICRB0_E * - * IIO_ICRBD_A IIO_ICRB0_A * - * IIO_ICRBD_B IIO_ICRB0_B * - * IIO_ICRBD_C IIO_ICRB0_C * - * IIO_ICRBD_D IIO_ICRB0_D * - * IIO_ICRBD_E IIO_ICRB0_E * - * IIO_ICRBE_A IIO_ICRB0_A * - * IIO_ICRBE_B IIO_ICRB0_B * - * IIO_ICRBE_C IIO_ICRB0_C * - * IIO_ICRBE_D IIO_ICRB0_D * - * IIO_ICRBE_E IIO_ICRB0_E * - * * - ************************************************************************/ - -/* - * Slightly friendlier names for some common registers. - */ -#define IIO_WIDGET IIO_WID /* Widget identification */ -#define IIO_WIDGET_STAT IIO_WSTAT /* Widget status register */ -#define IIO_WIDGET_CTRL IIO_WCR /* Widget control register */ -#define IIO_PROTECT IIO_ILAPR /* IO interface protection */ -#define IIO_PROTECT_OVRRD IIO_ILAPO /* IO protect override */ -#define IIO_OUTWIDGET_ACCESS IIO_IOWA /* Outbound widget access */ -#define IIO_INWIDGET_ACCESS IIO_IIWA /* Inbound widget access */ -#define IIO_INDEV_ERR_MASK IIO_IIDEM /* Inbound device error mask */ -#define IIO_LLP_CSR IIO_ILCSR /* LLP control and status */ -#define IIO_LLP_LOG IIO_ILLR /* LLP log */ -#define IIO_XTALKCC_TOUT IIO_IXCC /* Xtalk credit count timeout */ -#define IIO_XTALKTT_TOUT IIO_IXTT /* Xtalk tail timeout */ -#define IIO_IO_ERR_CLR IIO_IECLR /* IO error clear */ -#define IIO_IGFX_0 IIO_IGFX0 -#define IIO_IGFX_1 IIO_IGFX1 -#define IIO_IBCT_0 IIO_IBCT0 -#define IIO_IBCT_1 IIO_IBCT1 -#define IIO_IBLS_0 IIO_IBLS0 -#define IIO_IBLS_1 IIO_IBLS1 -#define IIO_IBSA_0 IIO_IBSA0 -#define IIO_IBSA_1 IIO_IBSA1 -#define IIO_IBDA_0 IIO_IBDA0 -#define IIO_IBDA_1 IIO_IBDA1 -#define IIO_IBNA_0 IIO_IBNA0 -#define IIO_IBNA_1 IIO_IBNA1 -#define IIO_IBIA_0 IIO_IBIA0 -#define IIO_IBIA_1 IIO_IBIA1 -#define IIO_IOPRB_0 IIO_IPRB0 - -#define IIO_PRTE_A(_x) (IIO_IPRTE0_A + (8 * (_x))) -#define IIO_PRTE_B(_x) (IIO_IPRTE0_B + (8 * (_x))) -#define IIO_NUM_PRTES 8 /* Total number of PRB table entries */ -#define IIO_WIDPRTE_A(x) IIO_PRTE_A(((x) - 8)) /* widget ID to its PRTE num */ -#define IIO_WIDPRTE_B(x) IIO_PRTE_B(((x) - 8)) /* widget ID to its PRTE num */ - -#define IIO_NUM_IPRBS 9 - -#define IIO_LLP_CSR_IS_UP 0x00002000 -#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000 -#define IIO_LLP_CSR_LLP_STAT_SHFT 12 - -#define IIO_LLP_CB_MAX 0xffff /* in ILLR CB_CNT, Max Check Bit errors */ -#define IIO_LLP_SN_MAX 0xffff /* in ILLR SN_CNT, Max Sequence Number errors */ - -/* key to IIO_PROTECT_OVRRD */ -#define IIO_PROTECT_OVRRD_KEY 0x53474972756c6573ull /* "SGIrules" */ - -/* BTE register names */ -#define IIO_BTE_STAT_0 IIO_IBLS_0 /* Also BTE length/status 0 */ -#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */ -#define IIO_BTE_DEST_0 IIO_IBDA_0 /* Also BTE dest. address 0 */ -#define IIO_BTE_CTRL_0 IIO_IBCT_0 /* Also BTE control/terminate 0 */ -#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */ -#define IIO_BTE_INT_0 IIO_IBIA_0 /* Also BTE interrupt 0 */ -#define IIO_BTE_OFF_0 0 /* Base offset from BTE 0 regs. */ -#define IIO_BTE_OFF_1 (IIO_IBLS_1 - IIO_IBLS_0) /* Offset from base to BTE 1 */ - -/* BTE register offsets from base */ -#define BTEOFF_STAT 0 -#define BTEOFF_SRC (IIO_BTE_SRC_0 - IIO_BTE_STAT_0) -#define BTEOFF_DEST (IIO_BTE_DEST_0 - IIO_BTE_STAT_0) -#define BTEOFF_CTRL (IIO_BTE_CTRL_0 - IIO_BTE_STAT_0) -#define BTEOFF_NOTIFY (IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0) -#define BTEOFF_INT (IIO_BTE_INT_0 - IIO_BTE_STAT_0) - -/* names used in shub diags */ -#define IIO_BASE_BTE0 IIO_IBLS_0 -#define IIO_BASE_BTE1 IIO_IBLS_1 - -/* - * Macro which takes the widget number, and returns the - * IO PRB address of that widget. - * value _x is expected to be a widget number in the range - * 0, 8 - 0xF - */ -#define IIO_IOPRB(_x) (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \ - (_x) : \ - (_x) - (HUB_WIDGET_ID_MIN-1)) << 3) ) - -/* GFX Flow Control Node/Widget Register */ -#define IIO_IGFX_W_NUM_BITS 4 /* size of widget num field */ -#define IIO_IGFX_W_NUM_MASK ((1<> IIO_WSTAT_TXRETRY_SHFT) & \ - IIO_WSTAT_TXRETRY_MASK) - -/* Number of II perf. counters we can multiplex at once */ - -#define IO_PERF_SETS 32 - -/* Bit for the widget in inbound access register */ -#define IIO_IIWA_WIDGET(_w) ((u64)(1ULL << _w)) -/* Bit for the widget in outbound access register */ -#define IIO_IOWA_WIDGET(_w) ((u64)(1ULL << _w)) - -/* NOTE: The following define assumes that we are going to get - * widget numbers from 8 thru F and the device numbers within - * widget from 0 thru 7. - */ -#define IIO_IIDEM_WIDGETDEV_MASK(w, d) ((u64)(1ULL << (8 * ((w) - 8) + (d)))) - -/* IO Interrupt Destination Register */ -#define IIO_IIDSR_SENT_SHIFT 28 -#define IIO_IIDSR_SENT_MASK 0x30000000 -#define IIO_IIDSR_ENB_SHIFT 24 -#define IIO_IIDSR_ENB_MASK 0x01000000 -#define IIO_IIDSR_NODE_SHIFT 9 -#define IIO_IIDSR_NODE_MASK 0x000ff700 -#define IIO_IIDSR_PI_ID_SHIFT 8 -#define IIO_IIDSR_PI_ID_MASK 0x00000100 -#define IIO_IIDSR_LVL_SHIFT 0 -#define IIO_IIDSR_LVL_MASK 0x000000ff - -/* Xtalk timeout threshhold register (IIO_IXTT) */ -#define IXTT_RRSP_TO_SHFT 55 /* read response timeout */ -#define IXTT_RRSP_TO_MASK (0x1FULL << IXTT_RRSP_TO_SHFT) -#define IXTT_RRSP_PS_SHFT 32 /* read responsed TO prescalar */ -#define IXTT_RRSP_PS_MASK (0x7FFFFFULL << IXTT_RRSP_PS_SHFT) -#define IXTT_TAIL_TO_SHFT 0 /* tail timeout counter threshold */ -#define IXTT_TAIL_TO_MASK (0x3FFFFFFULL << IXTT_TAIL_TO_SHFT) - -/* - * The IO LLP control status register and widget control register - */ - -typedef union hubii_wcr_u { - u64 wcr_reg_value; - struct { - u64 wcr_widget_id:4, /* LLP crossbar credit */ - wcr_tag_mode:1, /* Tag mode */ - wcr_rsvd1:8, /* Reserved */ - wcr_xbar_crd:3, /* LLP crossbar credit */ - wcr_f_bad_pkt:1, /* Force bad llp pkt enable */ - wcr_dir_con:1, /* widget direct connect */ - wcr_e_thresh:5, /* elasticity threshold */ - wcr_rsvd:41; /* unused */ - } wcr_fields_s; -} hubii_wcr_t; - -#define iwcr_dir_con wcr_fields_s.wcr_dir_con - -/* The structures below are defined to extract and modify the ii -performance registers */ - -/* io_perf_sel allows the caller to specify what tests will be - performed */ - -typedef union io_perf_sel { - u64 perf_sel_reg; - struct { - u64 perf_ippr0:4, perf_ippr1:4, perf_icct:8, perf_rsvd:48; - } perf_sel_bits; -} io_perf_sel_t; - -/* io_perf_cnt is to extract the count from the shub registers. Due to - hardware problems there is only one counter, not two. */ - -typedef union io_perf_cnt { - u64 perf_cnt; - struct { - u64 perf_cnt:20, perf_rsvd2:12, perf_rsvd1:32; - } perf_cnt_bits; - -} io_perf_cnt_t; - -typedef union iprte_a { - u64 entry; - struct { - u64 i_rsvd_1:3; - u64 i_addr:38; - u64 i_init:3; - u64 i_source:8; - u64 i_rsvd:2; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } iprte_fields; -} iprte_a_t; - -#endif /* _ASM_IA64_SN_SHUBIO_H */ diff --git a/include/asm-ia64/sn/simulator.h b/include/asm-ia64/sn/simulator.h deleted file mode 100644 index c2611f6cfe33..000000000000 --- a/include/asm-ia64/sn/simulator.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_SIMULATOR_H -#define _ASM_IA64_SN_SIMULATOR_H - -#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV) -#define SNMAGIC 0xaeeeeeee8badbeefL -#define IS_MEDUSA() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;}) - -#define SIMULATOR_SLEEP() asm("nop.i 0x8beef") -#define IS_RUNNING_ON_SIMULATOR() (sn_prom_type) -#define IS_RUNNING_ON_FAKE_PROM() (sn_prom_type == 2) -extern int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */ -#else -#define IS_MEDUSA() 0 -#define SIMULATOR_SLEEP() -#define IS_RUNNING_ON_SIMULATOR() 0 -#endif - -#endif /* _ASM_IA64_SN_SIMULATOR_H */ diff --git a/include/asm-ia64/sn/sn2/sn_hwperf.h b/include/asm-ia64/sn/sn2/sn_hwperf.h deleted file mode 100644 index e61ebac38cdd..000000000000 --- a/include/asm-ia64/sn/sn2/sn_hwperf.h +++ /dev/null @@ -1,242 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved. - * - * Data types used by the SN_SAL_HWPERF_OP SAL call for monitoring - * SGI Altix node and router hardware - * - * Mark Goodwin Mon Aug 30 12:23:46 EST 2004 - */ - -#ifndef SN_HWPERF_H -#define SN_HWPERF_H - -/* - * object structure. SN_HWPERF_ENUM_OBJECTS and SN_HWPERF_GET_CPU_INFO - * return an array of these. Do not change this without also - * changing the corresponding SAL code. - */ -#define SN_HWPERF_MAXSTRING 128 -struct sn_hwperf_object_info { - u32 id; - union { - struct { - u64 this_part:1; - u64 is_shared:1; - } fields; - struct { - u64 flags; - u64 reserved; - } b; - } f; - char name[SN_HWPERF_MAXSTRING]; - char location[SN_HWPERF_MAXSTRING]; - u32 ports; -}; - -#define sn_hwp_this_part f.fields.this_part -#define sn_hwp_is_shared f.fields.is_shared -#define sn_hwp_flags f.b.flags - -/* macros for object classification */ -#define SN_HWPERF_IS_NODE(x) ((x) && strstr((x)->name, "SHub")) -#define SN_HWPERF_IS_NODE_SHUB2(x) ((x) && strstr((x)->name, "SHub 2.")) -#define SN_HWPERF_IS_IONODE(x) ((x) && strstr((x)->name, "TIO")) -#define SN_HWPERF_IS_NL3ROUTER(x) ((x) && strstr((x)->name, "NL3Router")) -#define SN_HWPERF_IS_NL4ROUTER(x) ((x) && strstr((x)->name, "NL4Router")) -#define SN_HWPERF_IS_OLDROUTER(x) ((x) && strstr((x)->name, "Router")) -#define SN_HWPERF_IS_ROUTER(x) (SN_HWPERF_IS_NL3ROUTER(x) || \ - SN_HWPERF_IS_NL4ROUTER(x) || \ - SN_HWPERF_IS_OLDROUTER(x)) -#define SN_HWPERF_FOREIGN(x) ((x) && !(x)->sn_hwp_this_part && !(x)->sn_hwp_is_shared) -#define SN_HWPERF_SAME_OBJTYPE(x,y) ((SN_HWPERF_IS_NODE(x) && SN_HWPERF_IS_NODE(y)) ||\ - (SN_HWPERF_IS_IONODE(x) && SN_HWPERF_IS_IONODE(y)) ||\ - (SN_HWPERF_IS_ROUTER(x) && SN_HWPERF_IS_ROUTER(y))) - -/* numa port structure, SN_HWPERF_ENUM_PORTS returns an array of these */ -struct sn_hwperf_port_info { - u32 port; - u32 conn_id; - u32 conn_port; -}; - -/* for HWPERF_{GET,SET}_MMRS */ -struct sn_hwperf_data { - u64 addr; - u64 data; -}; - -/* user ioctl() argument, see below */ -struct sn_hwperf_ioctl_args { - u64 arg; /* argument, usually an object id */ - u64 sz; /* size of transfer */ - void *ptr; /* pointer to source/target */ - u32 v0; /* second return value */ -}; - -/* - * For SN_HWPERF_{GET,SET}_MMRS and SN_HWPERF_OBJECT_DISTANCE, - * sn_hwperf_ioctl_args.arg can be used to specify a CPU on which - * to call SAL, and whether to use an interprocessor interrupt - * or task migration in order to do so. If the CPU specified is - * SN_HWPERF_ARG_ANY_CPU, then the current CPU will be used. - */ -#define SN_HWPERF_ARG_ANY_CPU 0x7fffffffUL -#define SN_HWPERF_ARG_CPU_MASK 0x7fffffff00000000ULL -#define SN_HWPERF_ARG_USE_IPI_MASK 0x8000000000000000ULL -#define SN_HWPERF_ARG_OBJID_MASK 0x00000000ffffffffULL - -/* - * ioctl requests on the "sn_hwperf" misc device that call SAL. - */ -#define SN_HWPERF_OP_MEM_COPYIN 0x1000 -#define SN_HWPERF_OP_MEM_COPYOUT 0x2000 -#define SN_HWPERF_OP_MASK 0x0fff - -/* - * Determine mem requirement. - * arg don't care - * sz 8 - * p pointer to u64 integer - */ -#define SN_HWPERF_GET_HEAPSIZE 1 - -/* - * Install mem for SAL drvr - * arg don't care - * sz sizeof buffer pointed to by p - * p pointer to buffer for scratch area - */ -#define SN_HWPERF_INSTALL_HEAP 2 - -/* - * Determine number of objects - * arg don't care - * sz 8 - * p pointer to u64 integer - */ -#define SN_HWPERF_OBJECT_COUNT (10|SN_HWPERF_OP_MEM_COPYOUT) - -/* - * Determine object "distance", relative to a cpu. This operation can - * execute on a designated logical cpu number, using either an IPI or - * via task migration. If the cpu number is SN_HWPERF_ANY_CPU, then - * the current CPU is used. See the SN_HWPERF_ARG_* macros above. - * - * arg bitmap of IPI flag, cpu number and object id - * sz 8 - * p pointer to u64 integer - */ -#define SN_HWPERF_OBJECT_DISTANCE (11|SN_HWPERF_OP_MEM_COPYOUT) - -/* - * Enumerate objects. Special case if sz == 8, returns the required - * buffer size. - * arg don't care - * sz sizeof buffer pointed to by p - * p pointer to array of struct sn_hwperf_object_info - */ -#define SN_HWPERF_ENUM_OBJECTS (12|SN_HWPERF_OP_MEM_COPYOUT) - -/* - * Enumerate NumaLink ports for an object. Special case if sz == 8, - * returns the required buffer size. - * arg object id - * sz sizeof buffer pointed to by p - * p pointer to array of struct sn_hwperf_port_info - */ -#define SN_HWPERF_ENUM_PORTS (13|SN_HWPERF_OP_MEM_COPYOUT) - -/* - * SET/GET memory mapped registers. These operations can execute - * on a designated logical cpu number, using either an IPI or via - * task migration. If the cpu number is SN_HWPERF_ANY_CPU, then - * the current CPU is used. See the SN_HWPERF_ARG_* macros above. - * - * arg bitmap of ipi flag, cpu number and object id - * sz sizeof buffer pointed to by p - * p pointer to array of struct sn_hwperf_data - */ -#define SN_HWPERF_SET_MMRS (14|SN_HWPERF_OP_MEM_COPYIN) -#define SN_HWPERF_GET_MMRS (15|SN_HWPERF_OP_MEM_COPYOUT| \ - SN_HWPERF_OP_MEM_COPYIN) -/* - * Lock a shared object - * arg object id - * sz don't care - * p don't care - */ -#define SN_HWPERF_ACQUIRE 16 - -/* - * Unlock a shared object - * arg object id - * sz don't care - * p don't care - */ -#define SN_HWPERF_RELEASE 17 - -/* - * Break a lock on a shared object - * arg object id - * sz don't care - * p don't care - */ -#define SN_HWPERF_FORCE_RELEASE 18 - -/* - * ioctl requests on "sn_hwperf" that do not call SAL - */ - -/* - * get cpu info as an array of hwperf_object_info_t. - * id is logical CPU number, name is description, location - * is geoid (e.g. 001c04#1c). Special case if sz == 8, - * returns the required buffer size. - * - * arg don't care - * sz sizeof buffer pointed to by p - * p pointer to array of struct sn_hwperf_object_info - */ -#define SN_HWPERF_GET_CPU_INFO (100|SN_HWPERF_OP_MEM_COPYOUT) - -/* - * Given an object id, return it's node number (aka cnode). - * arg object id - * sz 8 - * p pointer to u64 integer - */ -#define SN_HWPERF_GET_OBJ_NODE (101|SN_HWPERF_OP_MEM_COPYOUT) - -/* - * Given a node number (cnode), return it's nasid. - * arg ordinal node number (aka cnodeid) - * sz 8 - * p pointer to u64 integer - */ -#define SN_HWPERF_GET_NODE_NASID (102|SN_HWPERF_OP_MEM_COPYOUT) - -/* - * Given a node id, determine the id of the nearest node with CPUs - * and the id of the nearest node that has memory. The argument - * node would normally be a "headless" node, e.g. an "IO node". - * Return 0 on success. - */ -extern int sn_hwperf_get_nearest_node(cnodeid_t node, - cnodeid_t *near_mem, cnodeid_t *near_cpu); - -/* return codes */ -#define SN_HWPERF_OP_OK 0 -#define SN_HWPERF_OP_NOMEM 1 -#define SN_HWPERF_OP_NO_PERM 2 -#define SN_HWPERF_OP_IO_ERROR 3 -#define SN_HWPERF_OP_BUSY 4 -#define SN_HWPERF_OP_RECONFIGURE 253 -#define SN_HWPERF_OP_INVAL 254 - -int sn_topology_open(struct inode *inode, struct file *file); -int sn_topology_release(struct inode *inode, struct file *file); -#endif /* SN_HWPERF_H */ diff --git a/include/asm-ia64/sn/sn_cpuid.h b/include/asm-ia64/sn/sn_cpuid.h deleted file mode 100644 index a676dd9ace3e..000000000000 --- a/include/asm-ia64/sn/sn_cpuid.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved. - */ - - -#ifndef _ASM_IA64_SN_SN_CPUID_H -#define _ASM_IA64_SN_SN_CPUID_H - -#include -#include -#include -#include - - -/* - * Functions for converting between cpuids, nodeids and NASIDs. - * - * These are for SGI platforms only. - * - */ - - - - -/* - * Definitions of terms (these definitions are for IA64 ONLY. Other architectures - * use cpuid/cpunum quite defferently): - * - * CPUID - a number in range of 0..NR_CPUS-1 that uniquely identifies - * the cpu. The value cpuid has no significance on IA64 other than - * the boot cpu is 0. - * smp_processor_id() returns the cpuid of the current cpu. - * - * CPU_PHYSICAL_ID (also known as HARD_PROCESSOR_ID) - * This is the same as 31:24 of the processor LID register - * hard_smp_processor_id()- cpu_physical_id of current processor - * cpu_physical_id(cpuid) - convert a to a - * cpu_logical_id(phy_id) - convert a to a - * * not real efficient - don't use in perf critical code - * - * SLICE - a number in the range of 0 - 3 (typically) that represents the - * cpu number on a brick. - * - * SUBNODE - (almost obsolete) the number of the FSB that a cpu is - * connected to. This is also the same as the PI number. Usually 0 or 1. - * - * NOTE!!!: the value of the bits in the cpu physical id (SAPICid or LID) of a cpu has no - * significance. The SAPIC id (LID) is a 16-bit cookie that has meaning only to the PROM. - * - * - * The macros convert between cpu physical ids & slice/nasid/cnodeid. - * These terms are described below: - * - * - * Brick - * ----- ----- ----- ----- CPU - * | 0 | | 1 | | 0 | | 1 | SLICE - * ----- ----- ----- ----- - * | | | | - * | | | | - * 0 | | 2 0 | | 2 FSB SLOT - * ------- ------- - * | | - * | | - * | | - * ------------ ------------- - * | | | | - * | SHUB | | SHUB | NASID (0..MAX_NASIDS) - * | |----- | | CNODEID (0..num_compact_nodes-1) - * | | | | - * | | | | - * ------------ ------------- - * | | - * - * - */ - -#define get_node_number(addr) NASID_GET(addr) - -/* - * NOTE: on non-MP systems, only cpuid 0 exists - */ - -extern short physical_node_map[]; /* indexed by nasid to get cnode */ - -/* - * Macros for retrieving info about current cpu - */ -#define get_nasid() (sn_nodepda->phys_cpuid[smp_processor_id()].nasid) -#define get_subnode() (sn_nodepda->phys_cpuid[smp_processor_id()].subnode) -#define get_slice() (sn_nodepda->phys_cpuid[smp_processor_id()].slice) -#define get_cnode() (sn_nodepda->phys_cpuid[smp_processor_id()].cnode) -#define get_sapicid() ((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff) - -/* - * Macros for retrieving info about an arbitrary cpu - * cpuid - logical cpu id - */ -#define cpuid_to_nasid(cpuid) (sn_nodepda->phys_cpuid[cpuid].nasid) -#define cpuid_to_subnode(cpuid) (sn_nodepda->phys_cpuid[cpuid].subnode) -#define cpuid_to_slice(cpuid) (sn_nodepda->phys_cpuid[cpuid].slice) - - -/* - * Dont use the following in performance critical code. They require scans - * of potentially large tables. - */ -extern int nasid_slice_to_cpuid(int, int); - -/* - * cnodeid_to_nasid - convert a cnodeid to a NASID - */ -#define cnodeid_to_nasid(cnodeid) (sn_cnodeid_to_nasid[cnodeid]) - -/* - * nasid_to_cnodeid - convert a NASID to a cnodeid - */ -#define nasid_to_cnodeid(nasid) (physical_node_map[nasid]) - -/* - * partition_coherence_id - get the coherence ID of the current partition - */ -extern u8 sn_coherency_id; -#define partition_coherence_id() (sn_coherency_id) - -#endif /* _ASM_IA64_SN_SN_CPUID_H */ - diff --git a/include/asm-ia64/sn/sn_feature_sets.h b/include/asm-ia64/sn/sn_feature_sets.h deleted file mode 100644 index 8e83ac117ace..000000000000 --- a/include/asm-ia64/sn/sn_feature_sets.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef _ASM_IA64_SN_FEATURE_SETS_H -#define _ASM_IA64_SN_FEATURE_SETS_H - -/* - * SN PROM Features - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2005-2006 Silicon Graphics, Inc. All rights reserved. - */ - - -/* --------------------- PROM Features -----------------------------*/ -extern int sn_prom_feature_available(int id); - -#define MAX_PROM_FEATURE_SETS 2 - -/* - * The following defines features that may or may not be supported by the - * current PROM. The OS uses sn_prom_feature_available(feature) to test for - * the presence of a PROM feature. Down rev (old) PROMs will always test - * "false" for new features. - * - * Use: - * if (sn_prom_feature_available(PRF_XXX)) - * ... - */ - -#define PRF_PAL_CACHE_FLUSH_SAFE 0 -#define PRF_DEVICE_FLUSH_LIST 1 -#define PRF_HOTPLUG_SUPPORT 2 -#define PRF_CPU_DISABLE_SUPPORT 3 - -/* --------------------- OS Features -------------------------------*/ - -/* - * The following defines OS features that are optionally present in - * the operating system. - * During boot, PROM is notified of these features via a series of calls: - * - * ia64_sn_set_os_feature(feature1); - * - * Once enabled, a feature cannot be disabled. - * - * By default, features are disabled unless explicitly enabled. - * - * These defines must be kept in sync with the corresponding - * PROM definitions in feature_sets.h. - */ -#define OSF_MCA_SLV_TO_OS_INIT_SLV 0 -#define OSF_FEAT_LOG_SBES 1 -#define OSF_ACPI_ENABLE 2 -#define OSF_PCISEGMENT_ENABLE 3 - - -#endif /* _ASM_IA64_SN_FEATURE_SETS_H */ diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h deleted file mode 100644 index 676b31a08c61..000000000000 --- a/include/asm-ia64/sn/sn_sal.h +++ /dev/null @@ -1,1188 +0,0 @@ -#ifndef _ASM_IA64_SN_SN_SAL_H -#define _ASM_IA64_SN_SN_SAL_H - -/* - * System Abstraction Layer definitions for IA64 - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2000-2006 Silicon Graphics, Inc. All rights reserved. - */ - - -#include -#include -#include -#include -#include -#include - -// SGI Specific Calls -#define SN_SAL_POD_MODE 0x02000001 -#define SN_SAL_SYSTEM_RESET 0x02000002 -#define SN_SAL_PROBE 0x02000003 -#define SN_SAL_GET_MASTER_NASID 0x02000004 -#define SN_SAL_GET_KLCONFIG_ADDR 0x02000005 -#define SN_SAL_LOG_CE 0x02000006 -#define SN_SAL_REGISTER_CE 0x02000007 -#define SN_SAL_GET_PARTITION_ADDR 0x02000009 -#define SN_SAL_XP_ADDR_REGION 0x0200000f -#define SN_SAL_NO_FAULT_ZONE_VIRTUAL 0x02000010 -#define SN_SAL_NO_FAULT_ZONE_PHYSICAL 0x02000011 -#define SN_SAL_PRINT_ERROR 0x02000012 -#define SN_SAL_REGISTER_PMI_HANDLER 0x02000014 -#define SN_SAL_SET_ERROR_HANDLING_FEATURES 0x0200001a // reentrant -#define SN_SAL_GET_FIT_COMPT 0x0200001b // reentrant -#define SN_SAL_GET_SAPIC_INFO 0x0200001d -#define SN_SAL_GET_SN_INFO 0x0200001e -#define SN_SAL_CONSOLE_PUTC 0x02000021 -#define SN_SAL_CONSOLE_GETC 0x02000022 -#define SN_SAL_CONSOLE_PUTS 0x02000023 -#define SN_SAL_CONSOLE_GETS 0x02000024 -#define SN_SAL_CONSOLE_GETS_TIMEOUT 0x02000025 -#define SN_SAL_CONSOLE_POLL 0x02000026 -#define SN_SAL_CONSOLE_INTR 0x02000027 -#define SN_SAL_CONSOLE_PUTB 0x02000028 -#define SN_SAL_CONSOLE_XMIT_CHARS 0x0200002a -#define SN_SAL_CONSOLE_READC 0x0200002b -#define SN_SAL_SYSCTL_OP 0x02000030 -#define SN_SAL_SYSCTL_MODID_GET 0x02000031 -#define SN_SAL_SYSCTL_GET 0x02000032 -#define SN_SAL_SYSCTL_IOBRICK_MODULE_GET 0x02000033 -#define SN_SAL_SYSCTL_IO_PORTSPEED_GET 0x02000035 -#define SN_SAL_SYSCTL_SLAB_GET 0x02000036 -#define SN_SAL_BUS_CONFIG 0x02000037 -#define SN_SAL_SYS_SERIAL_GET 0x02000038 -#define SN_SAL_PARTITION_SERIAL_GET 0x02000039 -#define SN_SAL_SYSCTL_PARTITION_GET 0x0200003a -#define SN_SAL_SYSTEM_POWER_DOWN 0x0200003b -#define SN_SAL_GET_MASTER_BASEIO_NASID 0x0200003c -#define SN_SAL_COHERENCE 0x0200003d -#define SN_SAL_MEMPROTECT 0x0200003e -#define SN_SAL_SYSCTL_FRU_CAPTURE 0x0200003f - -#define SN_SAL_SYSCTL_IOBRICK_PCI_OP 0x02000042 // reentrant -#define SN_SAL_IROUTER_OP 0x02000043 -#define SN_SAL_SYSCTL_EVENT 0x02000044 -#define SN_SAL_IOIF_INTERRUPT 0x0200004a -#define SN_SAL_HWPERF_OP 0x02000050 // lock -#define SN_SAL_IOIF_ERROR_INTERRUPT 0x02000051 -#define SN_SAL_IOIF_PCI_SAFE 0x02000052 -#define SN_SAL_IOIF_SLOT_ENABLE 0x02000053 -#define SN_SAL_IOIF_SLOT_DISABLE 0x02000054 -#define SN_SAL_IOIF_GET_HUBDEV_INFO 0x02000055 -#define SN_SAL_IOIF_GET_PCIBUS_INFO 0x02000056 -#define SN_SAL_IOIF_GET_PCIDEV_INFO 0x02000057 -#define SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST 0x02000058 // deprecated -#define SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST 0x0200005a - -#define SN_SAL_IOIF_INIT 0x0200005f -#define SN_SAL_HUB_ERROR_INTERRUPT 0x02000060 -#define SN_SAL_BTE_RECOVER 0x02000061 -#define SN_SAL_RESERVED_DO_NOT_USE 0x02000062 -#define SN_SAL_IOIF_GET_PCI_TOPOLOGY 0x02000064 - -#define SN_SAL_GET_PROM_FEATURE_SET 0x02000065 -#define SN_SAL_SET_OS_FEATURE_SET 0x02000066 -#define SN_SAL_INJECT_ERROR 0x02000067 -#define SN_SAL_SET_CPU_NUMBER 0x02000068 - -#define SN_SAL_KERNEL_LAUNCH_EVENT 0x02000069 - -/* - * Service-specific constants - */ - -/* Console interrupt manipulation */ - /* action codes */ -#define SAL_CONSOLE_INTR_OFF 0 /* turn the interrupt off */ -#define SAL_CONSOLE_INTR_ON 1 /* turn the interrupt on */ -#define SAL_CONSOLE_INTR_STATUS 2 /* retrieve the interrupt status */ - /* interrupt specification & status return codes */ -#define SAL_CONSOLE_INTR_XMIT 1 /* output interrupt */ -#define SAL_CONSOLE_INTR_RECV 2 /* input interrupt */ - -/* interrupt handling */ -#define SAL_INTR_ALLOC 1 -#define SAL_INTR_FREE 2 -#define SAL_INTR_REDIRECT 3 - -/* - * operations available on the generic SN_SAL_SYSCTL_OP - * runtime service - */ -#define SAL_SYSCTL_OP_IOBOARD 0x0001 /* retrieve board type */ -#define SAL_SYSCTL_OP_TIO_JLCK_RST 0x0002 /* issue TIO clock reset */ - -/* - * IRouter (i.e. generalized system controller) operations - */ -#define SAL_IROUTER_OPEN 0 /* open a subchannel */ -#define SAL_IROUTER_CLOSE 1 /* close a subchannel */ -#define SAL_IROUTER_SEND 2 /* send part of an IRouter packet */ -#define SAL_IROUTER_RECV 3 /* receive part of an IRouter packet */ -#define SAL_IROUTER_INTR_STATUS 4 /* check the interrupt status for - * an open subchannel - */ -#define SAL_IROUTER_INTR_ON 5 /* enable an interrupt */ -#define SAL_IROUTER_INTR_OFF 6 /* disable an interrupt */ -#define SAL_IROUTER_INIT 7 /* initialize IRouter driver */ - -/* IRouter interrupt mask bits */ -#define SAL_IROUTER_INTR_XMIT SAL_CONSOLE_INTR_XMIT -#define SAL_IROUTER_INTR_RECV SAL_CONSOLE_INTR_RECV - -/* - * Error Handling Features - */ -#define SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV 0x1 // obsolete -#define SAL_ERR_FEAT_LOG_SBES 0x2 // obsolete -#define SAL_ERR_FEAT_MFR_OVERRIDE 0x4 -#define SAL_ERR_FEAT_SBE_THRESHOLD 0xffff0000 - -/* - * SAL Error Codes - */ -#define SALRET_MORE_PASSES 1 -#define SALRET_OK 0 -#define SALRET_NOT_IMPLEMENTED (-1) -#define SALRET_INVALID_ARG (-2) -#define SALRET_ERROR (-3) - -#define SN_SAL_FAKE_PROM 0x02009999 - -/** - * sn_sal_revision - get the SGI SAL revision number - * - * The SGI PROM stores its version in the sal_[ab]_rev_(major|minor). - * This routine simply extracts the major and minor values and - * presents them in a u32 format. - * - * For example, version 4.05 would be represented at 0x0405. - */ -static inline u32 -sn_sal_rev(void) -{ - struct ia64_sal_systab *systab = __va(efi.sal_systab); - - return (u32)(systab->sal_b_rev_major << 8 | systab->sal_b_rev_minor); -} - -/* - * Returns the master console nasid, if the call fails, return an illegal - * value. - */ -static inline u64 -ia64_sn_get_console_nasid(void) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_NASID, 0, 0, 0, 0, 0, 0, 0); - - if (ret_stuff.status < 0) - return ret_stuff.status; - - /* Master console nasid is in 'v0' */ - return ret_stuff.v0; -} - -/* - * Returns the master baseio nasid, if the call fails, return an illegal - * value. - */ -static inline u64 -ia64_sn_get_master_baseio_nasid(void) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_BASEIO_NASID, 0, 0, 0, 0, 0, 0, 0); - - if (ret_stuff.status < 0) - return ret_stuff.status; - - /* Master baseio nasid is in 'v0' */ - return ret_stuff.v0; -} - -static inline void * -ia64_sn_get_klconfig_addr(nasid_t nasid) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0); - return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL; -} - -/* - * Returns the next console character. - */ -static inline u64 -ia64_sn_console_getc(int *ch) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_GETC, 0, 0, 0, 0, 0, 0, 0); - - /* character is in 'v0' */ - *ch = (int)ret_stuff.v0; - - return ret_stuff.status; -} - -/* - * Read a character from the SAL console device, after a previous interrupt - * or poll operation has given us to know that a character is available - * to be read. - */ -static inline u64 -ia64_sn_console_readc(void) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_READC, 0, 0, 0, 0, 0, 0, 0); - - /* character is in 'v0' */ - return ret_stuff.v0; -} - -/* - * Sends the given character to the console. - */ -static inline u64 -ia64_sn_console_putc(char ch) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTC, (u64)ch, 0, 0, 0, 0, 0, 0); - - return ret_stuff.status; -} - -/* - * Sends the given buffer to the console. - */ -static inline u64 -ia64_sn_console_putb(const char *buf, int len) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTB, (u64)buf, (u64)len, 0, 0, 0, 0, 0); - - if ( ret_stuff.status == 0 ) { - return ret_stuff.v0; - } - return (u64)0; -} - -/* - * Print a platform error record - */ -static inline u64 -ia64_sn_plat_specific_err_print(int (*hook)(const char*, ...), char *rec) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_REENTRANT(ret_stuff, SN_SAL_PRINT_ERROR, (u64)hook, (u64)rec, 0, 0, 0, 0, 0); - - return ret_stuff.status; -} - -/* - * Check for Platform errors - */ -static inline u64 -ia64_sn_plat_cpei_handler(void) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_LOG_CE, 0, 0, 0, 0, 0, 0, 0); - - return ret_stuff.status; -} - -/* - * Set Error Handling Features (Obsolete) - */ -static inline u64 -ia64_sn_plat_set_error_handling_features(void) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_REENTRANT(ret_stuff, SN_SAL_SET_ERROR_HANDLING_FEATURES, - SAL_ERR_FEAT_LOG_SBES, - 0, 0, 0, 0, 0, 0); - - return ret_stuff.status; -} - -/* - * Checks for console input. - */ -static inline u64 -ia64_sn_console_check(int *result) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_POLL, 0, 0, 0, 0, 0, 0, 0); - - /* result is in 'v0' */ - *result = (int)ret_stuff.v0; - - return ret_stuff.status; -} - -/* - * Checks console interrupt status - */ -static inline u64 -ia64_sn_console_intr_status(void) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, - 0, SAL_CONSOLE_INTR_STATUS, - 0, 0, 0, 0, 0); - - if (ret_stuff.status == 0) { - return ret_stuff.v0; - } - - return 0; -} - -/* - * Enable an interrupt on the SAL console device. - */ -static inline void -ia64_sn_console_intr_enable(u64 intr) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, - intr, SAL_CONSOLE_INTR_ON, - 0, 0, 0, 0, 0); -} - -/* - * Disable an interrupt on the SAL console device. - */ -static inline void -ia64_sn_console_intr_disable(u64 intr) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, - intr, SAL_CONSOLE_INTR_OFF, - 0, 0, 0, 0, 0); -} - -/* - * Sends a character buffer to the console asynchronously. - */ -static inline u64 -ia64_sn_console_xmit_chars(char *buf, int len) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_XMIT_CHARS, - (u64)buf, (u64)len, - 0, 0, 0, 0, 0); - - if (ret_stuff.status == 0) { - return ret_stuff.v0; - } - - return 0; -} - -/* - * Returns the iobrick module Id - */ -static inline u64 -ia64_sn_sysctl_iobrick_module_get(nasid_t nasid, int *result) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYSCTL_IOBRICK_MODULE_GET, nasid, 0, 0, 0, 0, 0, 0); - - /* result is in 'v0' */ - *result = (int)ret_stuff.v0; - - return ret_stuff.status; -} - -/** - * ia64_sn_pod_mode - call the SN_SAL_POD_MODE function - * - * SN_SAL_POD_MODE actually takes an argument, but it's always - * 0 when we call it from the kernel, so we don't have to expose - * it to the caller. - */ -static inline u64 -ia64_sn_pod_mode(void) -{ - struct ia64_sal_retval isrv; - SAL_CALL_REENTRANT(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0); - if (isrv.status) - return 0; - return isrv.v0; -} - -/** - * ia64_sn_probe_mem - read from memory safely - * @addr: address to probe - * @size: number bytes to read (1,2,4,8) - * @data_ptr: address to store value read by probe (-1 returned if probe fails) - * - * Call into the SAL to do a memory read. If the read generates a machine - * check, this routine will recover gracefully and return -1 to the caller. - * @addr is usually a kernel virtual address in uncached space (i.e. the - * address starts with 0xc), but if called in physical mode, @addr should - * be a physical address. - * - * Return values: - * 0 - probe successful - * 1 - probe failed (generated MCA) - * 2 - Bad arg - * <0 - PAL error - */ -static inline u64 -ia64_sn_probe_mem(long addr, long size, void *data_ptr) -{ - struct ia64_sal_retval isrv; - - SAL_CALL(isrv, SN_SAL_PROBE, addr, size, 0, 0, 0, 0, 0); - - if (data_ptr) { - switch (size) { - case 1: - *((u8*)data_ptr) = (u8)isrv.v0; - break; - case 2: - *((u16*)data_ptr) = (u16)isrv.v0; - break; - case 4: - *((u32*)data_ptr) = (u32)isrv.v0; - break; - case 8: - *((u64*)data_ptr) = (u64)isrv.v0; - break; - default: - isrv.status = 2; - } - } - return isrv.status; -} - -/* - * Retrieve the system serial number as an ASCII string. - */ -static inline u64 -ia64_sn_sys_serial_get(char *buf) -{ - struct ia64_sal_retval ret_stuff; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYS_SERIAL_GET, buf, 0, 0, 0, 0, 0, 0); - return ret_stuff.status; -} - -extern char sn_system_serial_number_string[]; -extern u64 sn_partition_serial_number; - -static inline char * -sn_system_serial_number(void) { - if (sn_system_serial_number_string[0]) { - return(sn_system_serial_number_string); - } else { - ia64_sn_sys_serial_get(sn_system_serial_number_string); - return(sn_system_serial_number_string); - } -} - - -/* - * Returns a unique id number for this system and partition (suitable for - * use with license managers), based in part on the system serial number. - */ -static inline u64 -ia64_sn_partition_serial_get(void) -{ - struct ia64_sal_retval ret_stuff; - ia64_sal_oemcall_reentrant(&ret_stuff, SN_SAL_PARTITION_SERIAL_GET, 0, - 0, 0, 0, 0, 0, 0); - if (ret_stuff.status != 0) - return 0; - return ret_stuff.v0; -} - -static inline u64 -sn_partition_serial_number_val(void) { - if (unlikely(sn_partition_serial_number == 0)) { - sn_partition_serial_number = ia64_sn_partition_serial_get(); - } - return sn_partition_serial_number; -} - -/* - * Returns the partition id of the nasid passed in as an argument, - * or INVALID_PARTID if the partition id cannot be retrieved. - */ -static inline partid_t -ia64_sn_sysctl_partition_get(nasid_t nasid) -{ - struct ia64_sal_retval ret_stuff; - SAL_CALL(ret_stuff, SN_SAL_SYSCTL_PARTITION_GET, nasid, - 0, 0, 0, 0, 0, 0); - if (ret_stuff.status != 0) - return -1; - return ((partid_t)ret_stuff.v0); -} - -/* - * Returns the physical address of the partition's reserved page through - * an iterative number of calls. - * - * On first call, 'cookie' and 'len' should be set to 0, and 'addr' - * set to the nasid of the partition whose reserved page's address is - * being sought. - * On subsequent calls, pass the values, that were passed back on the - * previous call. - * - * While the return status equals SALRET_MORE_PASSES, keep calling - * this function after first copying 'len' bytes starting at 'addr' - * into 'buf'. Once the return status equals SALRET_OK, 'addr' will - * be the physical address of the partition's reserved page. If the - * return status equals neither of these, an error as occurred. - */ -static inline s64 -sn_partition_reserved_page_pa(u64 buf, u64 *cookie, u64 *addr, u64 *len) -{ - struct ia64_sal_retval rv; - ia64_sal_oemcall_reentrant(&rv, SN_SAL_GET_PARTITION_ADDR, *cookie, - *addr, buf, *len, 0, 0, 0); - *cookie = rv.v0; - *addr = rv.v1; - *len = rv.v2; - return rv.status; -} - -/* - * Register or unregister a physical address range being referenced across - * a partition boundary for which certain SAL errors should be scanned for, - * cleaned up and ignored. This is of value for kernel partitioning code only. - * Values for the operation argument: - * 1 = register this address range with SAL - * 0 = unregister this address range with SAL - * - * SAL maintains a reference count on an address range in case it is registered - * multiple times. - * - * On success, returns the reference count of the address range after the SAL - * call has performed the current registration/unregistration. Returns a - * negative value if an error occurred. - */ -static inline int -sn_register_xp_addr_region(u64 paddr, u64 len, int operation) -{ - struct ia64_sal_retval ret_stuff; - ia64_sal_oemcall(&ret_stuff, SN_SAL_XP_ADDR_REGION, paddr, len, - (u64)operation, 0, 0, 0, 0); - return ret_stuff.status; -} - -/* - * Register or unregister an instruction range for which SAL errors should - * be ignored. If an error occurs while in the registered range, SAL jumps - * to return_addr after ignoring the error. Values for the operation argument: - * 1 = register this instruction range with SAL - * 0 = unregister this instruction range with SAL - * - * Returns 0 on success, or a negative value if an error occurred. - */ -static inline int -sn_register_nofault_code(u64 start_addr, u64 end_addr, u64 return_addr, - int virtual, int operation) -{ - struct ia64_sal_retval ret_stuff; - u64 call; - if (virtual) { - call = SN_SAL_NO_FAULT_ZONE_VIRTUAL; - } else { - call = SN_SAL_NO_FAULT_ZONE_PHYSICAL; - } - ia64_sal_oemcall(&ret_stuff, call, start_addr, end_addr, return_addr, - (u64)1, 0, 0, 0); - return ret_stuff.status; -} - -/* - * Register or unregister a function to handle a PMI received by a CPU. - * Before calling the registered handler, SAL sets r1 to the value that - * was passed in as the global_pointer. - * - * If the handler pointer is NULL, then the currently registered handler - * will be unregistered. - * - * Returns 0 on success, or a negative value if an error occurred. - */ -static inline int -sn_register_pmi_handler(u64 handler, u64 global_pointer) -{ - struct ia64_sal_retval ret_stuff; - ia64_sal_oemcall(&ret_stuff, SN_SAL_REGISTER_PMI_HANDLER, handler, - global_pointer, 0, 0, 0, 0, 0); - return ret_stuff.status; -} - -/* - * Change or query the coherence domain for this partition. Each cpu-based - * nasid is represented by a bit in an array of 64-bit words: - * 0 = not in this partition's coherency domain - * 1 = in this partition's coherency domain - * - * It is not possible for the local system's nasids to be removed from - * the coherency domain. Purpose of the domain arguments: - * new_domain = set the coherence domain to the given nasids - * old_domain = return the current coherence domain - * - * Returns 0 on success, or a negative value if an error occurred. - */ -static inline int -sn_change_coherence(u64 *new_domain, u64 *old_domain) -{ - struct ia64_sal_retval ret_stuff; - ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_COHERENCE, (u64)new_domain, - (u64)old_domain, 0, 0, 0, 0, 0); - return ret_stuff.status; -} - -/* - * Change memory access protections for a physical address range. - * nasid_array is not used on Altix, but may be in future architectures. - * Available memory protection access classes are defined after the function. - */ -static inline int -sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array) -{ - struct ia64_sal_retval ret_stuff; - - ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_MEMPROTECT, paddr, len, - (u64)nasid_array, perms, 0, 0, 0); - return ret_stuff.status; -} -#define SN_MEMPROT_ACCESS_CLASS_0 0x14a080 -#define SN_MEMPROT_ACCESS_CLASS_1 0x2520c2 -#define SN_MEMPROT_ACCESS_CLASS_2 0x14a1ca -#define SN_MEMPROT_ACCESS_CLASS_3 0x14a290 -#define SN_MEMPROT_ACCESS_CLASS_6 0x084080 -#define SN_MEMPROT_ACCESS_CLASS_7 0x021080 - -/* - * Turns off system power. - */ -static inline void -ia64_sn_power_down(void) -{ - struct ia64_sal_retval ret_stuff; - SAL_CALL(ret_stuff, SN_SAL_SYSTEM_POWER_DOWN, 0, 0, 0, 0, 0, 0, 0); - while(1) - cpu_relax(); - /* never returns */ -} - -/** - * ia64_sn_fru_capture - tell the system controller to capture hw state - * - * This routine will call the SAL which will tell the system controller(s) - * to capture hw mmr information from each SHub in the system. - */ -static inline u64 -ia64_sn_fru_capture(void) -{ - struct ia64_sal_retval isrv; - SAL_CALL(isrv, SN_SAL_SYSCTL_FRU_CAPTURE, 0, 0, 0, 0, 0, 0, 0); - if (isrv.status) - return 0; - return isrv.v0; -} - -/* - * Performs an operation on a PCI bus or slot -- power up, power down - * or reset. - */ -static inline u64 -ia64_sn_sysctl_iobrick_pci_op(nasid_t n, u64 connection_type, - u64 bus, char slot, - u64 action) -{ - struct ia64_sal_retval rv = {0, 0, 0, 0}; - - SAL_CALL_NOLOCK(rv, SN_SAL_SYSCTL_IOBRICK_PCI_OP, connection_type, n, action, - bus, (u64) slot, 0, 0); - if (rv.status) - return rv.v0; - return 0; -} - - -/* - * Open a subchannel for sending arbitrary data to the system - * controller network via the system controller device associated with - * 'nasid'. Return the subchannel number or a negative error code. - */ -static inline int -ia64_sn_irtr_open(nasid_t nasid) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_OPEN, nasid, - 0, 0, 0, 0, 0); - return (int) rv.v0; -} - -/* - * Close system controller subchannel 'subch' previously opened on 'nasid'. - */ -static inline int -ia64_sn_irtr_close(nasid_t nasid, int subch) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_CLOSE, - (u64) nasid, (u64) subch, 0, 0, 0, 0); - return (int) rv.status; -} - -/* - * Read data from system controller associated with 'nasid' on - * subchannel 'subch'. The buffer to be filled is pointed to by - * 'buf', and its capacity is in the integer pointed to by 'len'. The - * referent of 'len' is set to the number of bytes read by the SAL - * call. The return value is either SALRET_OK (for bytes read) or - * SALRET_ERROR (for error or "no data available"). - */ -static inline int -ia64_sn_irtr_recv(nasid_t nasid, int subch, char *buf, int *len) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_RECV, - (u64) nasid, (u64) subch, (u64) buf, (u64) len, - 0, 0); - return (int) rv.status; -} - -/* - * Write data to the system controller network via the system - * controller associated with 'nasid' on suchannel 'subch'. The - * buffer to be written out is pointed to by 'buf', and 'len' is the - * number of bytes to be written. The return value is either the - * number of bytes written (which could be zero) or a negative error - * code. - */ -static inline int -ia64_sn_irtr_send(nasid_t nasid, int subch, char *buf, int len) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_SEND, - (u64) nasid, (u64) subch, (u64) buf, (u64) len, - 0, 0); - return (int) rv.v0; -} - -/* - * Check whether any interrupts are pending for the system controller - * associated with 'nasid' and its subchannel 'subch'. The return - * value is a mask of pending interrupts (SAL_IROUTER_INTR_XMIT and/or - * SAL_IROUTER_INTR_RECV). - */ -static inline int -ia64_sn_irtr_intr(nasid_t nasid, int subch) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_STATUS, - (u64) nasid, (u64) subch, 0, 0, 0, 0); - return (int) rv.v0; -} - -/* - * Enable the interrupt indicated by the intr parameter (either - * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV). - */ -static inline int -ia64_sn_irtr_intr_enable(nasid_t nasid, int subch, u64 intr) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_ON, - (u64) nasid, (u64) subch, intr, 0, 0, 0); - return (int) rv.v0; -} - -/* - * Disable the interrupt indicated by the intr parameter (either - * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV). - */ -static inline int -ia64_sn_irtr_intr_disable(nasid_t nasid, int subch, u64 intr) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_OFF, - (u64) nasid, (u64) subch, intr, 0, 0, 0); - return (int) rv.v0; -} - -/* - * Set up a node as the point of contact for system controller - * environmental event delivery. - */ -static inline int -ia64_sn_sysctl_event_init(nasid_t nasid) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_EVENT, (u64) nasid, - 0, 0, 0, 0, 0, 0); - return (int) rv.v0; -} - -/* - * Ask the system controller on the specified nasid to reset - * the CX corelet clock. Only valid on TIO nodes. - */ -static inline int -ia64_sn_sysctl_tio_clock_reset(nasid_t nasid) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_TIO_JLCK_RST, - nasid, 0, 0, 0, 0, 0); - if (rv.status != 0) - return (int)rv.status; - if (rv.v0 != 0) - return (int)rv.v0; - - return 0; -} - -/* - * Get the associated ioboard type for a given nasid. - */ -static inline s64 -ia64_sn_sysctl_ioboard_get(nasid_t nasid, u16 *ioboard) -{ - struct ia64_sal_retval isrv; - SAL_CALL_REENTRANT(isrv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_IOBOARD, - nasid, 0, 0, 0, 0, 0); - if (isrv.v0 != 0) { - *ioboard = isrv.v0; - return isrv.status; - } - if (isrv.v1 != 0) { - *ioboard = isrv.v1; - return isrv.status; - } - - return isrv.status; -} - -/** - * ia64_sn_get_fit_compt - read a FIT entry from the PROM header - * @nasid: NASID of node to read - * @index: FIT entry index to be retrieved (0..n) - * @fitentry: 16 byte buffer where FIT entry will be stored. - * @banbuf: optional buffer for retrieving banner - * @banlen: length of banner buffer - * - * Access to the physical PROM chips needs to be serialized since reads and - * writes can't occur at the same time, so we need to call into the SAL when - * we want to look at the FIT entries on the chips. - * - * Returns: - * %SALRET_OK if ok - * %SALRET_INVALID_ARG if index too big - * %SALRET_NOT_IMPLEMENTED if running on older PROM - * ??? if nasid invalid OR banner buffer not large enough - */ -static inline int -ia64_sn_get_fit_compt(u64 nasid, u64 index, void *fitentry, void *banbuf, - u64 banlen) -{ - struct ia64_sal_retval rv; - SAL_CALL_NOLOCK(rv, SN_SAL_GET_FIT_COMPT, nasid, index, fitentry, - banbuf, banlen, 0, 0); - return (int) rv.status; -} - -/* - * Initialize the SAL components of the system controller - * communication driver; specifically pass in a sizable buffer that - * can be used for allocation of subchannel queues as new subchannels - * are opened. "buf" points to the buffer, and "len" specifies its - * length. - */ -static inline int -ia64_sn_irtr_init(nasid_t nasid, void *buf, int len) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INIT, - (u64) nasid, (u64) buf, (u64) len, 0, 0, 0); - return (int) rv.status; -} - -/* - * Returns the nasid, subnode & slice corresponding to a SAPIC ID - * - * In: - * arg0 - SN_SAL_GET_SAPIC_INFO - * arg1 - sapicid (lid >> 16) - * Out: - * v0 - nasid - * v1 - subnode - * v2 - slice - */ -static inline u64 -ia64_sn_get_sapic_info(int sapicid, int *nasid, int *subnode, int *slice) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SAPIC_INFO, sapicid, 0, 0, 0, 0, 0, 0); - -/***** BEGIN HACK - temp til old proms no longer supported ********/ - if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) { - if (nasid) *nasid = sapicid & 0xfff; - if (subnode) *subnode = (sapicid >> 13) & 1; - if (slice) *slice = (sapicid >> 12) & 3; - return 0; - } -/***** END HACK *******/ - - if (ret_stuff.status < 0) - return ret_stuff.status; - - if (nasid) *nasid = (int) ret_stuff.v0; - if (subnode) *subnode = (int) ret_stuff.v1; - if (slice) *slice = (int) ret_stuff.v2; - return 0; -} - -/* - * Returns information about the HUB/SHUB. - * In: - * arg0 - SN_SAL_GET_SN_INFO - * arg1 - 0 (other values reserved for future use) - * Out: - * v0 - * [7:0] - shub type (0=shub1, 1=shub2) - * [15:8] - Log2 max number of nodes in entire system (includes - * C-bricks, I-bricks, etc) - * [23:16] - Log2 of nodes per sharing domain - * [31:24] - partition ID - * [39:32] - coherency_id - * [47:40] - regionsize - * v1 - * [15:0] - nasid mask (ex., 0x7ff for 11 bit nasid) - * [23:15] - bit position of low nasid bit - */ -static inline u64 -ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift, - u8 *systemsize, u8 *sharing_domain_size, u8 *partid, u8 *coher, u8 *reg) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SN_INFO, fc, 0, 0, 0, 0, 0, 0); - -/***** BEGIN HACK - temp til old proms no longer supported ********/ - if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) { - int nasid = get_sapicid() & 0xfff; -#define SH_SHUB_ID_NODES_PER_BIT_MASK 0x001f000000000000UL -#define SH_SHUB_ID_NODES_PER_BIT_SHFT 48 - if (shubtype) *shubtype = 0; - if (nasid_bitmask) *nasid_bitmask = 0x7ff; - if (nasid_shift) *nasid_shift = 38; - if (systemsize) *systemsize = 10; - if (sharing_domain_size) *sharing_domain_size = 8; - if (partid) *partid = ia64_sn_sysctl_partition_get(nasid); - if (coher) *coher = nasid >> 9; - if (reg) *reg = (HUB_L((u64 *) LOCAL_MMR_ADDR(SH1_SHUB_ID)) & SH_SHUB_ID_NODES_PER_BIT_MASK) >> - SH_SHUB_ID_NODES_PER_BIT_SHFT; - return 0; - } -/***** END HACK *******/ - - if (ret_stuff.status < 0) - return ret_stuff.status; - - if (shubtype) *shubtype = ret_stuff.v0 & 0xff; - if (systemsize) *systemsize = (ret_stuff.v0 >> 8) & 0xff; - if (sharing_domain_size) *sharing_domain_size = (ret_stuff.v0 >> 16) & 0xff; - if (partid) *partid = (ret_stuff.v0 >> 24) & 0xff; - if (coher) *coher = (ret_stuff.v0 >> 32) & 0xff; - if (reg) *reg = (ret_stuff.v0 >> 40) & 0xff; - if (nasid_bitmask) *nasid_bitmask = (ret_stuff.v1 & 0xffff); - if (nasid_shift) *nasid_shift = (ret_stuff.v1 >> 16) & 0xff; - return 0; -} - -/* - * This is the access point to the Altix PROM hardware performance - * and status monitoring interface. For info on using this, see - * include/asm-ia64/sn/sn2/sn_hwperf.h - */ -static inline int -ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2, - u64 a3, u64 a4, int *v0) -{ - struct ia64_sal_retval rv; - SAL_CALL_NOLOCK(rv, SN_SAL_HWPERF_OP, (u64)nasid, - opcode, a0, a1, a2, a3, a4); - if (v0) - *v0 = (int) rv.v0; - return (int) rv.status; -} - -static inline int -ia64_sn_ioif_get_pci_topology(u64 buf, u64 len) -{ - struct ia64_sal_retval rv; - SAL_CALL_NOLOCK(rv, SN_SAL_IOIF_GET_PCI_TOPOLOGY, buf, len, 0, 0, 0, 0, 0); - return (int) rv.status; -} - -/* - * BTE error recovery is implemented in SAL - */ -static inline int -ia64_sn_bte_recovery(nasid_t nasid) -{ - struct ia64_sal_retval rv; - - rv.status = 0; - SAL_CALL_NOLOCK(rv, SN_SAL_BTE_RECOVER, (u64)nasid, 0, 0, 0, 0, 0, 0); - if (rv.status == SALRET_NOT_IMPLEMENTED) - return 0; - return (int) rv.status; -} - -static inline int -ia64_sn_is_fake_prom(void) -{ - struct ia64_sal_retval rv; - SAL_CALL_NOLOCK(rv, SN_SAL_FAKE_PROM, 0, 0, 0, 0, 0, 0, 0); - return (rv.status == 0); -} - -static inline int -ia64_sn_get_prom_feature_set(int set, unsigned long *feature_set) -{ - struct ia64_sal_retval rv; - - SAL_CALL_NOLOCK(rv, SN_SAL_GET_PROM_FEATURE_SET, set, 0, 0, 0, 0, 0, 0); - if (rv.status != 0) - return rv.status; - *feature_set = rv.v0; - return 0; -} - -static inline int -ia64_sn_set_os_feature(int feature) -{ - struct ia64_sal_retval rv; - - SAL_CALL_NOLOCK(rv, SN_SAL_SET_OS_FEATURE_SET, feature, 0, 0, 0, 0, 0, 0); - return rv.status; -} - -static inline int -sn_inject_error(u64 paddr, u64 *data, u64 *ecc) -{ - struct ia64_sal_retval ret_stuff; - - ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_INJECT_ERROR, paddr, (u64)data, - (u64)ecc, 0, 0, 0, 0); - return ret_stuff.status; -} - -static inline int -ia64_sn_set_cpu_number(int cpu) -{ - struct ia64_sal_retval rv; - - SAL_CALL_NOLOCK(rv, SN_SAL_SET_CPU_NUMBER, cpu, 0, 0, 0, 0, 0, 0); - return rv.status; -} -static inline int -ia64_sn_kernel_launch_event(void) -{ - struct ia64_sal_retval rv; - SAL_CALL_NOLOCK(rv, SN_SAL_KERNEL_LAUNCH_EVENT, 0, 0, 0, 0, 0, 0, 0); - return rv.status; -} -#endif /* _ASM_IA64_SN_SN_SAL_H */ diff --git a/include/asm-ia64/sn/tioca.h b/include/asm-ia64/sn/tioca.h deleted file mode 100644 index 666222d7f0f6..000000000000 --- a/include/asm-ia64/sn/tioca.h +++ /dev/null @@ -1,596 +0,0 @@ -#ifndef _ASM_IA64_SN_TIO_TIOCA_H -#define _ASM_IA64_SN_TIO_TIOCA_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. - */ - - -#define TIOCA_PART_NUM 0xE020 -#define TIOCA_MFGR_NUM 0x24 -#define TIOCA_REV_A 0x1 - -/* - * Register layout for TIO:CA. See below for bitmasks for each register. - */ - -struct tioca { - u64 ca_id; /* 0x000000 */ - u64 ca_control1; /* 0x000008 */ - u64 ca_control2; /* 0x000010 */ - u64 ca_status1; /* 0x000018 */ - u64 ca_status2; /* 0x000020 */ - u64 ca_gart_aperature; /* 0x000028 */ - u64 ca_gfx_detach; /* 0x000030 */ - u64 ca_inta_dest_addr; /* 0x000038 */ - u64 ca_intb_dest_addr; /* 0x000040 */ - u64 ca_err_int_dest_addr; /* 0x000048 */ - u64 ca_int_status; /* 0x000050 */ - u64 ca_int_status_alias; /* 0x000058 */ - u64 ca_mult_error; /* 0x000060 */ - u64 ca_mult_error_alias; /* 0x000068 */ - u64 ca_first_error; /* 0x000070 */ - u64 ca_int_mask; /* 0x000078 */ - u64 ca_crm_pkterr_type; /* 0x000080 */ - u64 ca_crm_pkterr_type_alias; /* 0x000088 */ - u64 ca_crm_ct_error_detail_1; /* 0x000090 */ - u64 ca_crm_ct_error_detail_2; /* 0x000098 */ - u64 ca_crm_tnumto; /* 0x0000A0 */ - u64 ca_gart_err; /* 0x0000A8 */ - u64 ca_pcierr_type; /* 0x0000B0 */ - u64 ca_pcierr_addr; /* 0x0000B8 */ - - u64 ca_pad_0000C0[3]; /* 0x0000{C0..D0} */ - - u64 ca_pci_rd_buf_flush; /* 0x0000D8 */ - u64 ca_pci_dma_addr_extn; /* 0x0000E0 */ - u64 ca_agp_dma_addr_extn; /* 0x0000E8 */ - u64 ca_force_inta; /* 0x0000F0 */ - u64 ca_force_intb; /* 0x0000F8 */ - u64 ca_debug_vector_sel; /* 0x000100 */ - u64 ca_debug_mux_core_sel; /* 0x000108 */ - u64 ca_debug_mux_pci_sel; /* 0x000110 */ - u64 ca_debug_domain_sel; /* 0x000118 */ - - u64 ca_pad_000120[28]; /* 0x0001{20..F8} */ - - u64 ca_gart_ptr_table; /* 0x200 */ - u64 ca_gart_tlb_addr[8]; /* 0x2{08..40} */ -}; - -/* - * Mask/shift definitions for TIO:CA registers. The convention here is - * to mainly use the names as they appear in the "TIO AEGIS Programmers' - * Reference" with a CA_ prefix added. Some exceptions were made to fix - * duplicate field names or to generalize fields that are common to - * different registers (ca_debug_mux_core_sel and ca_debug_mux_pci_sel for - * example). - * - * Fields consisting of a single bit have a single #define have a single - * macro declaration to mask the bit. Fields consisting of multiple bits - * have two declarations: one to mask the proper bits in a register, and - * a second with the suffix "_SHFT" to identify how far the mask needs to - * be shifted right to get its base value. - */ - -/* ==== ca_control1 */ -#define CA_SYS_BIG_END (1ull << 0) -#define CA_DMA_AGP_SWAP (1ull << 1) -#define CA_DMA_PCI_SWAP (1ull << 2) -#define CA_PIO_IO_SWAP (1ull << 3) -#define CA_PIO_MEM_SWAP (1ull << 4) -#define CA_GFX_WR_SWAP (1ull << 5) -#define CA_AGP_FW_ENABLE (1ull << 6) -#define CA_AGP_CAL_CYCLE (0x7ull << 7) -#define CA_AGP_CAL_CYCLE_SHFT 7 -#define CA_AGP_CAL_PRSCL_BYP (1ull << 10) -#define CA_AGP_INIT_CAL_ENB (1ull << 11) -#define CA_INJ_ADDR_PERR (1ull << 12) -#define CA_INJ_DATA_PERR (1ull << 13) - /* bits 15:14 unused */ -#define CA_PCIM_IO_NBE_AD (0x7ull << 16) -#define CA_PCIM_IO_NBE_AD_SHFT 16 -#define CA_PCIM_FAST_BTB_ENB (1ull << 19) - /* bits 23:20 unused */ -#define CA_PIO_ADDR_OFFSET (0xffull << 24) -#define CA_PIO_ADDR_OFFSET_SHFT 24 - /* bits 35:32 unused */ -#define CA_AGPDMA_OP_COMBDELAY (0x1full << 36) -#define CA_AGPDMA_OP_COMBDELAY_SHFT 36 - /* bit 41 unused */ -#define CA_AGPDMA_OP_ENB_COMBDELAY (1ull << 42) -#define CA_PCI_INT_LPCNT (0xffull << 44) -#define CA_PCI_INT_LPCNT_SHFT 44 - /* bits 63:52 unused */ - -/* ==== ca_control2 */ -#define CA_AGP_LATENCY_TO (0xffull << 0) -#define CA_AGP_LATENCY_TO_SHFT 0 -#define CA_PCI_LATENCY_TO (0xffull << 8) -#define CA_PCI_LATENCY_TO_SHFT 8 -#define CA_PCI_MAX_RETRY (0x3ffull << 16) -#define CA_PCI_MAX_RETRY_SHFT 16 - /* bits 27:26 unused */ -#define CA_RT_INT_EN (0x3ull << 28) -#define CA_RT_INT_EN_SHFT 28 -#define CA_MSI_INT_ENB (1ull << 30) -#define CA_PCI_ARB_ERR_ENB (1ull << 31) -#define CA_GART_MEM_PARAM (0x3ull << 32) -#define CA_GART_MEM_PARAM_SHFT 32 -#define CA_GART_RD_PREFETCH_ENB (1ull << 34) -#define CA_GART_WR_PREFETCH_ENB (1ull << 35) -#define CA_GART_FLUSH_TLB (1ull << 36) - /* bits 39:37 unused */ -#define CA_CRM_TNUMTO_PERIOD (0x1fffull << 40) -#define CA_CRM_TNUMTO_PERIOD_SHFT 40 - /* bits 55:53 unused */ -#define CA_CRM_TNUMTO_ENB (1ull << 56) -#define CA_CRM_PRESCALER_BYP (1ull << 57) - /* bits 59:58 unused */ -#define CA_CRM_MAX_CREDIT (0x7ull << 60) -#define CA_CRM_MAX_CREDIT_SHFT 60 - /* bit 63 unused */ - -/* ==== ca_status1 */ -#define CA_CORELET_ID (0x3ull << 0) -#define CA_CORELET_ID_SHFT 0 -#define CA_INTA_N (1ull << 2) -#define CA_INTB_N (1ull << 3) -#define CA_CRM_CREDIT_AVAIL (0x7ull << 4) -#define CA_CRM_CREDIT_AVAIL_SHFT 4 - /* bit 7 unused */ -#define CA_CRM_SPACE_AVAIL (0x7full << 8) -#define CA_CRM_SPACE_AVAIL_SHFT 8 - /* bit 15 unused */ -#define CA_GART_TLB_VAL (0xffull << 16) -#define CA_GART_TLB_VAL_SHFT 16 - /* bits 63:24 unused */ - -/* ==== ca_status2 */ -#define CA_GFX_CREDIT_AVAIL (0xffull << 0) -#define CA_GFX_CREDIT_AVAIL_SHFT 0 -#define CA_GFX_OPQ_AVAIL (0xffull << 8) -#define CA_GFX_OPQ_AVAIL_SHFT 8 -#define CA_GFX_WRBUFF_AVAIL (0xffull << 16) -#define CA_GFX_WRBUFF_AVAIL_SHFT 16 -#define CA_ADMA_OPQ_AVAIL (0xffull << 24) -#define CA_ADMA_OPQ_AVAIL_SHFT 24 -#define CA_ADMA_WRBUFF_AVAIL (0xffull << 32) -#define CA_ADMA_WRBUFF_AVAIL_SHFT 32 -#define CA_ADMA_RDBUFF_AVAIL (0x7full << 40) -#define CA_ADMA_RDBUFF_AVAIL_SHFT 40 -#define CA_PCI_PIO_OP_STAT (1ull << 47) -#define CA_PDMA_OPQ_AVAIL (0xfull << 48) -#define CA_PDMA_OPQ_AVAIL_SHFT 48 -#define CA_PDMA_WRBUFF_AVAIL (0xfull << 52) -#define CA_PDMA_WRBUFF_AVAIL_SHFT 52 -#define CA_PDMA_RDBUFF_AVAIL (0x3ull << 56) -#define CA_PDMA_RDBUFF_AVAIL_SHFT 56 - /* bits 63:58 unused */ - -/* ==== ca_gart_aperature */ -#define CA_GART_AP_ENB_AGP (1ull << 0) -#define CA_GART_PAGE_SIZE (1ull << 1) -#define CA_GART_AP_ENB_PCI (1ull << 2) - /* bits 11:3 unused */ -#define CA_GART_AP_SIZE (0x3ffull << 12) -#define CA_GART_AP_SIZE_SHFT 12 -#define CA_GART_AP_BASE (0x3ffffffffffull << 22) -#define CA_GART_AP_BASE_SHFT 22 - -/* ==== ca_inta_dest_addr - ==== ca_intb_dest_addr - ==== ca_err_int_dest_addr */ - /* bits 2:0 unused */ -#define CA_INT_DEST_ADDR (0x7ffffffffffffull << 3) -#define CA_INT_DEST_ADDR_SHFT 3 - /* bits 55:54 unused */ -#define CA_INT_DEST_VECT (0xffull << 56) -#define CA_INT_DEST_VECT_SHFT 56 - -/* ==== ca_int_status */ -/* ==== ca_int_status_alias */ -/* ==== ca_mult_error */ -/* ==== ca_mult_error_alias */ -/* ==== ca_first_error */ -/* ==== ca_int_mask */ -#define CA_PCI_ERR (1ull << 0) - /* bits 3:1 unused */ -#define CA_GART_FETCH_ERR (1ull << 4) -#define CA_GFX_WR_OVFLW (1ull << 5) -#define CA_PIO_REQ_OVFLW (1ull << 6) -#define CA_CRM_PKTERR (1ull << 7) -#define CA_CRM_DVERR (1ull << 8) -#define CA_TNUMTO (1ull << 9) -#define CA_CXM_RSP_CRED_OVFLW (1ull << 10) -#define CA_CXM_REQ_CRED_OVFLW (1ull << 11) -#define CA_PIO_INVALID_ADDR (1ull << 12) -#define CA_PCI_ARB_TO (1ull << 13) -#define CA_AGP_REQ_OFLOW (1ull << 14) -#define CA_SBA_TYPE1_ERR (1ull << 15) - /* bit 16 unused */ -#define CA_INTA (1ull << 17) -#define CA_INTB (1ull << 18) -#define CA_MULT_INTA (1ull << 19) -#define CA_MULT_INTB (1ull << 20) -#define CA_GFX_CREDIT_OVFLW (1ull << 21) - /* bits 63:22 unused */ - -/* ==== ca_crm_pkterr_type */ -/* ==== ca_crm_pkterr_type_alias */ -#define CA_CRM_PKTERR_SBERR_HDR (1ull << 0) -#define CA_CRM_PKTERR_DIDN (1ull << 1) -#define CA_CRM_PKTERR_PACTYPE (1ull << 2) -#define CA_CRM_PKTERR_INV_TNUM (1ull << 3) -#define CA_CRM_PKTERR_ADDR_RNG (1ull << 4) -#define CA_CRM_PKTERR_ADDR_ALGN (1ull << 5) -#define CA_CRM_PKTERR_HDR_PARAM (1ull << 6) -#define CA_CRM_PKTERR_CW_ERR (1ull << 7) -#define CA_CRM_PKTERR_SBERR_NH (1ull << 8) -#define CA_CRM_PKTERR_EARLY_TERM (1ull << 9) -#define CA_CRM_PKTERR_EARLY_TAIL (1ull << 10) -#define CA_CRM_PKTERR_MSSNG_TAIL (1ull << 11) -#define CA_CRM_PKTERR_MSSNG_HDR (1ull << 12) - /* bits 15:13 unused */ -#define CA_FIRST_CRM_PKTERR_SBERR_HDR (1ull << 16) -#define CA_FIRST_CRM_PKTERR_DIDN (1ull << 17) -#define CA_FIRST_CRM_PKTERR_PACTYPE (1ull << 18) -#define CA_FIRST_CRM_PKTERR_INV_TNUM (1ull << 19) -#define CA_FIRST_CRM_PKTERR_ADDR_RNG (1ull << 20) -#define CA_FIRST_CRM_PKTERR_ADDR_ALGN (1ull << 21) -#define CA_FIRST_CRM_PKTERR_HDR_PARAM (1ull << 22) -#define CA_FIRST_CRM_PKTERR_CW_ERR (1ull << 23) -#define CA_FIRST_CRM_PKTERR_SBERR_NH (1ull << 24) -#define CA_FIRST_CRM_PKTERR_EARLY_TERM (1ull << 25) -#define CA_FIRST_CRM_PKTERR_EARLY_TAIL (1ull << 26) -#define CA_FIRST_CRM_PKTERR_MSSNG_TAIL (1ull << 27) -#define CA_FIRST_CRM_PKTERR_MSSNG_HDR (1ull << 28) - /* bits 63:29 unused */ - -/* ==== ca_crm_ct_error_detail_1 */ -#define CA_PKT_TYPE (0xfull << 0) -#define CA_PKT_TYPE_SHFT 0 -#define CA_SRC_ID (0x3ull << 4) -#define CA_SRC_ID_SHFT 4 -#define CA_DATA_SZ (0x3ull << 6) -#define CA_DATA_SZ_SHFT 6 -#define CA_TNUM (0xffull << 8) -#define CA_TNUM_SHFT 8 -#define CA_DW_DATA_EN (0xffull << 16) -#define CA_DW_DATA_EN_SHFT 16 -#define CA_GFX_CRED (0xffull << 24) -#define CA_GFX_CRED_SHFT 24 -#define CA_MEM_RD_PARAM (0x3ull << 32) -#define CA_MEM_RD_PARAM_SHFT 32 -#define CA_PIO_OP (1ull << 34) -#define CA_CW_ERR (1ull << 35) - /* bits 62:36 unused */ -#define CA_VALID (1ull << 63) - -/* ==== ca_crm_ct_error_detail_2 */ - /* bits 2:0 unused */ -#define CA_PKT_ADDR (0x1fffffffffffffull << 3) -#define CA_PKT_ADDR_SHFT 3 - /* bits 63:56 unused */ - -/* ==== ca_crm_tnumto */ -#define CA_CRM_TNUMTO_VAL (0xffull << 0) -#define CA_CRM_TNUMTO_VAL_SHFT 0 -#define CA_CRM_TNUMTO_WR (1ull << 8) - /* bits 63:9 unused */ - -/* ==== ca_gart_err */ -#define CA_GART_ERR_SOURCE (0x3ull << 0) -#define CA_GART_ERR_SOURCE_SHFT 0 - /* bits 3:2 unused */ -#define CA_GART_ERR_ADDR (0xfffffffffull << 4) -#define CA_GART_ERR_ADDR_SHFT 4 - /* bits 63:40 unused */ - -/* ==== ca_pcierr_type */ -#define CA_PCIERR_DATA (0xffffffffull << 0) -#define CA_PCIERR_DATA_SHFT 0 -#define CA_PCIERR_ENB (0xfull << 32) -#define CA_PCIERR_ENB_SHFT 32 -#define CA_PCIERR_CMD (0xfull << 36) -#define CA_PCIERR_CMD_SHFT 36 -#define CA_PCIERR_A64 (1ull << 40) -#define CA_PCIERR_SLV_SERR (1ull << 41) -#define CA_PCIERR_SLV_WR_PERR (1ull << 42) -#define CA_PCIERR_SLV_RD_PERR (1ull << 43) -#define CA_PCIERR_MST_SERR (1ull << 44) -#define CA_PCIERR_MST_WR_PERR (1ull << 45) -#define CA_PCIERR_MST_RD_PERR (1ull << 46) -#define CA_PCIERR_MST_MABT (1ull << 47) -#define CA_PCIERR_MST_TABT (1ull << 48) -#define CA_PCIERR_MST_RETRY_TOUT (1ull << 49) - -#define CA_PCIERR_TYPES \ - (CA_PCIERR_A64|CA_PCIERR_SLV_SERR| \ - CA_PCIERR_SLV_WR_PERR|CA_PCIERR_SLV_RD_PERR| \ - CA_PCIERR_MST_SERR|CA_PCIERR_MST_WR_PERR|CA_PCIERR_MST_RD_PERR| \ - CA_PCIERR_MST_MABT|CA_PCIERR_MST_TABT|CA_PCIERR_MST_RETRY_TOUT) - - /* bits 63:50 unused */ - -/* ==== ca_pci_dma_addr_extn */ -#define CA_UPPER_NODE_OFFSET (0x3full << 0) -#define CA_UPPER_NODE_OFFSET_SHFT 0 - /* bits 7:6 unused */ -#define CA_CHIPLET_ID (0x3ull << 8) -#define CA_CHIPLET_ID_SHFT 8 - /* bits 11:10 unused */ -#define CA_PCI_DMA_NODE_ID (0xffffull << 12) -#define CA_PCI_DMA_NODE_ID_SHFT 12 - /* bits 27:26 unused */ -#define CA_PCI_DMA_PIO_MEM_TYPE (1ull << 28) - /* bits 63:29 unused */ - - -/* ==== ca_agp_dma_addr_extn */ - /* bits 19:0 unused */ -#define CA_AGP_DMA_NODE_ID (0xffffull << 20) -#define CA_AGP_DMA_NODE_ID_SHFT 20 - /* bits 27:26 unused */ -#define CA_AGP_DMA_PIO_MEM_TYPE (1ull << 28) - /* bits 63:29 unused */ - -/* ==== ca_debug_vector_sel */ -#define CA_DEBUG_MN_VSEL (0xfull << 0) -#define CA_DEBUG_MN_VSEL_SHFT 0 -#define CA_DEBUG_PP_VSEL (0xfull << 4) -#define CA_DEBUG_PP_VSEL_SHFT 4 -#define CA_DEBUG_GW_VSEL (0xfull << 8) -#define CA_DEBUG_GW_VSEL_SHFT 8 -#define CA_DEBUG_GT_VSEL (0xfull << 12) -#define CA_DEBUG_GT_VSEL_SHFT 12 -#define CA_DEBUG_PD_VSEL (0xfull << 16) -#define CA_DEBUG_PD_VSEL_SHFT 16 -#define CA_DEBUG_AD_VSEL (0xfull << 20) -#define CA_DEBUG_AD_VSEL_SHFT 20 -#define CA_DEBUG_CX_VSEL (0xfull << 24) -#define CA_DEBUG_CX_VSEL_SHFT 24 -#define CA_DEBUG_CR_VSEL (0xfull << 28) -#define CA_DEBUG_CR_VSEL_SHFT 28 -#define CA_DEBUG_BA_VSEL (0xfull << 32) -#define CA_DEBUG_BA_VSEL_SHFT 32 -#define CA_DEBUG_PE_VSEL (0xfull << 36) -#define CA_DEBUG_PE_VSEL_SHFT 36 -#define CA_DEBUG_BO_VSEL (0xfull << 40) -#define CA_DEBUG_BO_VSEL_SHFT 40 -#define CA_DEBUG_BI_VSEL (0xfull << 44) -#define CA_DEBUG_BI_VSEL_SHFT 44 -#define CA_DEBUG_AS_VSEL (0xfull << 48) -#define CA_DEBUG_AS_VSEL_SHFT 48 -#define CA_DEBUG_PS_VSEL (0xfull << 52) -#define CA_DEBUG_PS_VSEL_SHFT 52 -#define CA_DEBUG_PM_VSEL (0xfull << 56) -#define CA_DEBUG_PM_VSEL_SHFT 56 - /* bits 63:60 unused */ - -/* ==== ca_debug_mux_core_sel */ -/* ==== ca_debug_mux_pci_sel */ -#define CA_DEBUG_MSEL0 (0x7ull << 0) -#define CA_DEBUG_MSEL0_SHFT 0 - /* bit 3 unused */ -#define CA_DEBUG_NSEL0 (0x7ull << 4) -#define CA_DEBUG_NSEL0_SHFT 4 - /* bit 7 unused */ -#define CA_DEBUG_MSEL1 (0x7ull << 8) -#define CA_DEBUG_MSEL1_SHFT 8 - /* bit 11 unused */ -#define CA_DEBUG_NSEL1 (0x7ull << 12) -#define CA_DEBUG_NSEL1_SHFT 12 - /* bit 15 unused */ -#define CA_DEBUG_MSEL2 (0x7ull << 16) -#define CA_DEBUG_MSEL2_SHFT 16 - /* bit 19 unused */ -#define CA_DEBUG_NSEL2 (0x7ull << 20) -#define CA_DEBUG_NSEL2_SHFT 20 - /* bit 23 unused */ -#define CA_DEBUG_MSEL3 (0x7ull << 24) -#define CA_DEBUG_MSEL3_SHFT 24 - /* bit 27 unused */ -#define CA_DEBUG_NSEL3 (0x7ull << 28) -#define CA_DEBUG_NSEL3_SHFT 28 - /* bit 31 unused */ -#define CA_DEBUG_MSEL4 (0x7ull << 32) -#define CA_DEBUG_MSEL4_SHFT 32 - /* bit 35 unused */ -#define CA_DEBUG_NSEL4 (0x7ull << 36) -#define CA_DEBUG_NSEL4_SHFT 36 - /* bit 39 unused */ -#define CA_DEBUG_MSEL5 (0x7ull << 40) -#define CA_DEBUG_MSEL5_SHFT 40 - /* bit 43 unused */ -#define CA_DEBUG_NSEL5 (0x7ull << 44) -#define CA_DEBUG_NSEL5_SHFT 44 - /* bit 47 unused */ -#define CA_DEBUG_MSEL6 (0x7ull << 48) -#define CA_DEBUG_MSEL6_SHFT 48 - /* bit 51 unused */ -#define CA_DEBUG_NSEL6 (0x7ull << 52) -#define CA_DEBUG_NSEL6_SHFT 52 - /* bit 55 unused */ -#define CA_DEBUG_MSEL7 (0x7ull << 56) -#define CA_DEBUG_MSEL7_SHFT 56 - /* bit 59 unused */ -#define CA_DEBUG_NSEL7 (0x7ull << 60) -#define CA_DEBUG_NSEL7_SHFT 60 - /* bit 63 unused */ - - -/* ==== ca_debug_domain_sel */ -#define CA_DEBUG_DOMAIN_L (1ull << 0) -#define CA_DEBUG_DOMAIN_H (1ull << 1) - /* bits 63:2 unused */ - -/* ==== ca_gart_ptr_table */ -#define CA_GART_PTR_VAL (1ull << 0) - /* bits 11:1 unused */ -#define CA_GART_PTR_ADDR (0xfffffffffffull << 12) -#define CA_GART_PTR_ADDR_SHFT 12 - /* bits 63:56 unused */ - -/* ==== ca_gart_tlb_addr[0-7] */ -#define CA_GART_TLB_ADDR (0xffffffffffffffull << 0) -#define CA_GART_TLB_ADDR_SHFT 0 - /* bits 62:56 unused */ -#define CA_GART_TLB_ENTRY_VAL (1ull << 63) - -/* - * PIO address space ranges for TIO:CA - */ - -/* CA internal registers */ -#define CA_PIO_ADMIN 0x00000000 -#define CA_PIO_ADMIN_LEN 0x00010000 - -/* GFX Write Buffer - Diagnostics */ -#define CA_PIO_GFX 0x00010000 -#define CA_PIO_GFX_LEN 0x00010000 - -/* AGP DMA Write Buffer - Diagnostics */ -#define CA_PIO_AGP_DMAWRITE 0x00020000 -#define CA_PIO_AGP_DMAWRITE_LEN 0x00010000 - -/* AGP DMA READ Buffer - Diagnostics */ -#define CA_PIO_AGP_DMAREAD 0x00030000 -#define CA_PIO_AGP_DMAREAD_LEN 0x00010000 - -/* PCI Config Type 0 */ -#define CA_PIO_PCI_TYPE0_CONFIG 0x01000000 -#define CA_PIO_PCI_TYPE0_CONFIG_LEN 0x01000000 - -/* PCI Config Type 1 */ -#define CA_PIO_PCI_TYPE1_CONFIG 0x02000000 -#define CA_PIO_PCI_TYPE1_CONFIG_LEN 0x01000000 - -/* PCI I/O Cycles - mapped to PCI Address 0x00000000-0x04ffffff */ -#define CA_PIO_PCI_IO 0x03000000 -#define CA_PIO_PCI_IO_LEN 0x05000000 - -/* PCI MEM Cycles - mapped to PCI with CA_PIO_ADDR_OFFSET of ca_control1 */ -/* use Fast Write if enabled and coretalk packet type is a GFX request */ -#define CA_PIO_PCI_MEM_OFFSET 0x08000000 -#define CA_PIO_PCI_MEM_OFFSET_LEN 0x08000000 - -/* PCI MEM Cycles - mapped to PCI Address 0x00000000-0xbfffffff */ -/* use Fast Write if enabled and coretalk packet type is a GFX request */ -#define CA_PIO_PCI_MEM 0x40000000 -#define CA_PIO_PCI_MEM_LEN 0xc0000000 - -/* - * DMA space - * - * The CA aperature (ie. bus address range) mapped by the GART is segmented into - * two parts. The lower portion of the aperature is used for mapping 32 bit - * PCI addresses which are managed by the dma interfaces in this file. The - * upper poprtion of the aperature is used for mapping 48 bit AGP addresses. - * The AGP portion of the aperature is managed by the agpgart_be.c driver - * in drivers/linux/agp. There are ca-specific hooks in that driver to - * manipulate the gart, but management of the AGP portion of the aperature - * is the responsibility of that driver. - * - * CA allows three main types of DMA mapping: - * - * PCI 64-bit Managed by this driver - * PCI 32-bit Managed by this driver - * AGP 48-bit Managed by hooks in the /dev/agpgart driver - * - * All of the above can optionally be remapped through the GART. The following - * table lists the combinations of addressing types and GART remapping that - * is currently supported by the driver (h/w supports all, s/w limits this): - * - * PCI64 PCI32 AGP48 - * GART no yes yes - * Direct yes yes no - * - * GART remapping of PCI64 is not done because there is no need to. The - * 64 bit PCI address holds all of the information necessary to target any - * memory in the system. - * - * AGP48 is always mapped through the GART. Management of the AGP48 portion - * of the aperature is the responsibility of code in the agpgart_be driver. - * - * The non-64 bit bus address space will currently be partitioned like this: - * - * 0xffff_ffff_ffff +-------- - * | AGP48 direct - * | Space managed by this driver - * CA_AGP_DIRECT_BASE +-------- - * | AGP GART mapped (gfx aperature) - * | Space managed by /dev/agpgart driver - * | This range is exposed to the agpgart - * | driver as the "graphics aperature" - * CA_AGP_MAPPED_BASE +----- - * | PCI GART mapped - * | Space managed by this driver - * CA_PCI32_MAPPED_BASE +---- - * | PCI32 direct - * | Space managed by this driver - * 0xC000_0000 +-------- - * (CA_PCI32_DIRECT_BASE) - * - * The bus address range CA_PCI32_MAPPED_BASE through CA_AGP_DIRECT_BASE - * is what we call the CA aperature. Addresses falling in this range will - * be remapped using the GART. - * - * The bus address range CA_AGP_MAPPED_BASE through CA_AGP_DIRECT_BASE - * is what we call the graphics aperature. This is a subset of the CA - * aperature and is under the control of the agpgart_be driver. - * - * CA_PCI32_MAPPED_BASE, CA_AGP_MAPPED_BASE, and CA_AGP_DIRECT_BASE are - * somewhat arbitrary values. The known constraints on choosing these is: - * - * 1) CA_AGP_DIRECT_BASE-CA_PCI32_MAPPED_BASE+1 (the CA aperature size) - * must be one of the values supported by the ca_gart_aperature register. - * Currently valid values are: 4MB through 4096MB in powers of 2 increments - * - * 2) CA_AGP_DIRECT_BASE-CA_AGP_MAPPED_BASE+1 (the gfx aperature size) - * must be in MB units since that's what the agpgart driver assumes. - */ - -/* - * Define Bus DMA ranges. These are configurable (see constraints above) - * and will probably need tuning based on experience. - */ - - -/* - * 11/24/03 - * CA has an addressing glitch w.r.t. PCI direct 32 bit DMA that makes it - * generally unusable. The problem is that for PCI direct 32 - * DMA's, all 32 bits of the bus address are used to form the lower 32 bits - * of the coretalk address, and coretalk bits 38:32 come from a register. - * Since only PCI bus addresses 0xC0000000-0xFFFFFFFF (1GB) are available - * for DMA (the rest is allocated to PIO), host node addresses need to be - * such that their lower 32 bits fall in the 0xC0000000-0xffffffff range - * as well. So there can be no PCI32 direct DMA below 3GB!! For this - * reason we set the CA_PCI32_DIRECT_SIZE to 0 which essentially makes - * tioca_dma_direct32() a noop but preserves the code flow should this issue - * be fixed in a respin. - * - * For now, all PCI32 DMA's must be mapped through the GART. - */ - -#define CA_PCI32_DIRECT_BASE 0xC0000000UL /* BASE not configurable */ -#define CA_PCI32_DIRECT_SIZE 0x00000000UL /* 0 MB */ - -#define CA_PCI32_MAPPED_BASE 0xC0000000UL -#define CA_PCI32_MAPPED_SIZE 0x40000000UL /* 2GB */ - -#define CA_AGP_MAPPED_BASE 0x80000000UL -#define CA_AGP_MAPPED_SIZE 0x40000000UL /* 2GB */ - -#define CA_AGP_DIRECT_BASE 0x40000000UL /* 2GB */ -#define CA_AGP_DIRECT_SIZE 0x40000000UL - -#define CA_APERATURE_BASE (CA_AGP_MAPPED_BASE) -#define CA_APERATURE_SIZE (CA_AGP_MAPPED_SIZE+CA_PCI32_MAPPED_SIZE) - -#endif /* _ASM_IA64_SN_TIO_TIOCA_H */ diff --git a/include/asm-ia64/sn/tioca_provider.h b/include/asm-ia64/sn/tioca_provider.h deleted file mode 100644 index 9a820ac61be3..000000000000 --- a/include/asm-ia64/sn/tioca_provider.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H -#define _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H - -#include - -/* - * WAR enables - * Defines for individual WARs. Each is a bitmask of applicable - * part revision numbers. (1 << 1) == rev A, (1 << 2) == rev B, - * (3 << 1) == (rev A or rev B), etc - */ - -#define TIOCA_WAR_ENABLED(pv, tioca_common) \ - ((1 << tioca_common->ca_rev) & pv) - - /* TIO:ICE:FRZ:Freezer loses a PIO data ucred on PIO RD RSP with CW error */ -#define PV907908 (1 << 1) - /* ATI config space problems after BIOS execution starts */ -#define PV908234 (1 << 1) - /* CA:AGPDMA write request data mismatch with ABC1CL merge */ -#define PV895469 (1 << 1) - /* TIO:CA TLB invalidate of written GART entries possibly not occurring in CA*/ -#define PV910244 (1 << 1) - -struct tioca_dmamap{ - struct list_head cad_list; /* headed by ca_list */ - - dma_addr_t cad_dma_addr; /* Linux dma handle */ - uint cad_gart_entry; /* start entry in ca_gart_pagemap */ - uint cad_gart_size; /* #entries for this map */ -}; - -/* - * Kernel only fields. Prom may look at this stuff for debugging only. - * Access this structure through the ca_kernel_private ptr. - */ - -struct tioca_common ; - -struct tioca_kernel { - struct tioca_common *ca_common; /* tioca this belongs to */ - struct list_head ca_list; /* list of all ca's */ - struct list_head ca_dmamaps; - spinlock_t ca_lock; /* Kernel lock */ - cnodeid_t ca_closest_node; - struct list_head *ca_devices; /* bus->devices */ - - /* - * General GART stuff - */ - u64 ca_ap_size; /* size of aperature in bytes */ - u32 ca_gart_entries; /* # u64 entries in gart */ - u32 ca_ap_pagesize; /* aperature page size in bytes */ - u64 ca_ap_bus_base; /* bus address of CA aperature */ - u64 ca_gart_size; /* gart size in bytes */ - u64 *ca_gart; /* gart table vaddr */ - u64 ca_gart_coretalk_addr; /* gart coretalk addr */ - u8 ca_gart_iscoherent; /* used in tioca_tlbflush */ - - /* PCI GART convenience values */ - u64 ca_pciap_base; /* pci aperature bus base address */ - u64 ca_pciap_size; /* pci aperature size (bytes) */ - u64 ca_pcigart_base; /* gfx GART bus base address */ - u64 *ca_pcigart; /* gfx GART vm address */ - u32 ca_pcigart_entries; - u32 ca_pcigart_start; /* PCI start index in ca_gart */ - void *ca_pcigart_pagemap; - - /* AGP GART convenience values */ - u64 ca_gfxap_base; /* gfx aperature bus base address */ - u64 ca_gfxap_size; /* gfx aperature size (bytes) */ - u64 ca_gfxgart_base; /* gfx GART bus base address */ - u64 *ca_gfxgart; /* gfx GART vm address */ - u32 ca_gfxgart_entries; - u32 ca_gfxgart_start; /* agpgart start index in ca_gart */ -}; - -/* - * Common tioca info shared between kernel and prom - * - * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES - * TO THE PROM VERSION. - */ - -struct tioca_common { - struct pcibus_bussoft ca_common; /* common pciio header */ - - u32 ca_rev; - u32 ca_closest_nasid; - - u64 ca_prom_private; - u64 ca_kernel_private; -}; - -/** - * tioca_paddr_to_gart - Convert an SGI coretalk address to a CA GART entry - * @paddr: page address to convert - * - * Convert a system [coretalk] address to a GART entry. GART entries are - * formed using the following: - * - * data = ( (1<<63) | ( (REMAP_NODE_ID << 40) | (MD_CHIPLET_ID << 38) | - * (REMAP_SYS_ADDR) ) >> 12 ) - * - * DATA written to 1 GART TABLE Entry in system memory is remapped system - * addr for 1 page - * - * The data is for coretalk address format right shifted 12 bits with a - * valid bit. - * - * GART_TABLE_ENTRY [ 25:0 ] -- REMAP_SYS_ADDRESS[37:12]. - * GART_TABLE_ENTRY [ 27:26 ] -- SHUB MD chiplet id. - * GART_TABLE_ENTRY [ 41:28 ] -- REMAP_NODE_ID. - * GART_TABLE_ENTRY [ 63 ] -- Valid Bit - */ -static inline u64 -tioca_paddr_to_gart(unsigned long paddr) -{ - /* - * We are assuming right now that paddr already has the correct - * format since the address from xtalk_dmaXXX should already have - * NODE_ID, CHIPLET_ID, and SYS_ADDR in the correct locations. - */ - - return ((paddr) >> 12) | (1UL << 63); -} - -/** - * tioca_physpage_to_gart - Map a host physical page for SGI CA based DMA - * @page_addr: system page address to map - */ - -static inline unsigned long -tioca_physpage_to_gart(u64 page_addr) -{ - u64 coretalk_addr; - - coretalk_addr = PHYS_TO_TIODMA(page_addr); - if (!coretalk_addr) { - return 0; - } - - return tioca_paddr_to_gart(coretalk_addr); -} - -/** - * tioca_tlbflush - invalidate cached SGI CA GART TLB entries - * @tioca_kernel: CA context - * - * Invalidate tlb entries for a given CA GART. Main complexity is to account - * for revA bug. - */ -static inline void -tioca_tlbflush(struct tioca_kernel *tioca_kernel) -{ - volatile u64 tmp; - volatile struct tioca __iomem *ca_base; - struct tioca_common *tioca_common; - - tioca_common = tioca_kernel->ca_common; - ca_base = (struct tioca __iomem *)tioca_common->ca_common.bs_base; - - /* - * Explicit flushes not needed if GART is in cached mode - */ - if (tioca_kernel->ca_gart_iscoherent) { - if (TIOCA_WAR_ENABLED(PV910244, tioca_common)) { - /* - * PV910244: RevA CA needs explicit flushes. - * Need to put GART into uncached mode before - * flushing otherwise the explicit flush is ignored. - * - * Alternate WAR would be to leave GART cached and - * touch every CL aligned GART entry. - */ - - __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM); - __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB); - __sn_setq_relaxed(&ca_base->ca_control2, - (0x2ull << CA_GART_MEM_PARAM_SHFT)); - tmp = __sn_readq_relaxed(&ca_base->ca_control2); - } - - return; - } - - /* - * Gart in uncached mode ... need an explicit flush. - */ - - __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB); - tmp = __sn_readq_relaxed(&ca_base->ca_control2); -} - -extern u32 tioca_gart_found; -extern struct list_head tioca_list; -extern int tioca_init_provider(void); -extern void tioca_fastwrite_enable(struct tioca_kernel *tioca_kern); -#endif /* _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H */ diff --git a/include/asm-ia64/sn/tioce.h b/include/asm-ia64/sn/tioce.h deleted file mode 100644 index 893468e1b41b..000000000000 --- a/include/asm-ia64/sn/tioce.h +++ /dev/null @@ -1,760 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef __ASM_IA64_SN_TIOCE_H__ -#define __ASM_IA64_SN_TIOCE_H__ - -/* CE ASIC part & mfgr information */ -#define TIOCE_PART_NUM 0xCE00 -#define TIOCE_SRC_ID 0x01 -#define TIOCE_REV_A 0x1 - -/* CE Virtual PPB Vendor/Device IDs */ -#define CE_VIRT_PPB_VENDOR_ID 0x10a9 -#define CE_VIRT_PPB_DEVICE_ID 0x4002 - -/* CE Host Bridge Vendor/Device IDs */ -#define CE_HOST_BRIDGE_VENDOR_ID 0x10a9 -#define CE_HOST_BRIDGE_DEVICE_ID 0x4001 - - -#define TIOCE_NUM_M40_ATES 4096 -#define TIOCE_NUM_M3240_ATES 2048 -#define TIOCE_NUM_PORTS 2 - -/* - * Register layout for TIOCE. MMR offsets are shown at the far right of the - * structure definition. - */ -typedef volatile struct tioce { - /* - * ADMIN : Administration Registers - */ - u64 ce_adm_id; /* 0x000000 */ - u64 ce_pad_000008; /* 0x000008 */ - u64 ce_adm_dyn_credit_status; /* 0x000010 */ - u64 ce_adm_last_credit_status; /* 0x000018 */ - u64 ce_adm_credit_limit; /* 0x000020 */ - u64 ce_adm_force_credit; /* 0x000028 */ - u64 ce_adm_control; /* 0x000030 */ - u64 ce_adm_mmr_chn_timeout; /* 0x000038 */ - u64 ce_adm_ssp_ure_timeout; /* 0x000040 */ - u64 ce_adm_ssp_dre_timeout; /* 0x000048 */ - u64 ce_adm_ssp_debug_sel; /* 0x000050 */ - u64 ce_adm_int_status; /* 0x000058 */ - u64 ce_adm_int_status_alias; /* 0x000060 */ - u64 ce_adm_int_mask; /* 0x000068 */ - u64 ce_adm_int_pending; /* 0x000070 */ - u64 ce_adm_force_int; /* 0x000078 */ - u64 ce_adm_ure_ups_buf_barrier_flush; /* 0x000080 */ - u64 ce_adm_int_dest[15]; /* 0x000088 -- 0x0000F8 */ - u64 ce_adm_error_summary; /* 0x000100 */ - u64 ce_adm_error_summary_alias; /* 0x000108 */ - u64 ce_adm_error_mask; /* 0x000110 */ - u64 ce_adm_first_error; /* 0x000118 */ - u64 ce_adm_error_overflow; /* 0x000120 */ - u64 ce_adm_error_overflow_alias; /* 0x000128 */ - u64 ce_pad_000130[2]; /* 0x000130 -- 0x000138 */ - u64 ce_adm_tnum_error; /* 0x000140 */ - u64 ce_adm_mmr_err_detail; /* 0x000148 */ - u64 ce_adm_msg_sram_perr_detail; /* 0x000150 */ - u64 ce_adm_bap_sram_perr_detail; /* 0x000158 */ - u64 ce_adm_ce_sram_perr_detail; /* 0x000160 */ - u64 ce_adm_ce_credit_oflow_detail; /* 0x000168 */ - u64 ce_adm_tx_link_idle_max_timer; /* 0x000170 */ - u64 ce_adm_pcie_debug_sel; /* 0x000178 */ - u64 ce_pad_000180[16]; /* 0x000180 -- 0x0001F8 */ - - u64 ce_adm_pcie_debug_sel_top; /* 0x000200 */ - u64 ce_adm_pcie_debug_lat_sel_lo_top; /* 0x000208 */ - u64 ce_adm_pcie_debug_lat_sel_hi_top; /* 0x000210 */ - u64 ce_adm_pcie_debug_trig_sel_top; /* 0x000218 */ - u64 ce_adm_pcie_debug_trig_lat_sel_lo_top; /* 0x000220 */ - u64 ce_adm_pcie_debug_trig_lat_sel_hi_top; /* 0x000228 */ - u64 ce_adm_pcie_trig_compare_top; /* 0x000230 */ - u64 ce_adm_pcie_trig_compare_en_top; /* 0x000238 */ - u64 ce_adm_ssp_debug_sel_top; /* 0x000240 */ - u64 ce_adm_ssp_debug_lat_sel_lo_top; /* 0x000248 */ - u64 ce_adm_ssp_debug_lat_sel_hi_top; /* 0x000250 */ - u64 ce_adm_ssp_debug_trig_sel_top; /* 0x000258 */ - u64 ce_adm_ssp_debug_trig_lat_sel_lo_top; /* 0x000260 */ - u64 ce_adm_ssp_debug_trig_lat_sel_hi_top; /* 0x000268 */ - u64 ce_adm_ssp_trig_compare_top; /* 0x000270 */ - u64 ce_adm_ssp_trig_compare_en_top; /* 0x000278 */ - u64 ce_pad_000280[48]; /* 0x000280 -- 0x0003F8 */ - - u64 ce_adm_bap_ctrl; /* 0x000400 */ - u64 ce_pad_000408[127]; /* 0x000408 -- 0x0007F8 */ - - u64 ce_msg_buf_data63_0[35]; /* 0x000800 -- 0x000918 */ - u64 ce_pad_000920[29]; /* 0x000920 -- 0x0009F8 */ - - u64 ce_msg_buf_data127_64[35]; /* 0x000A00 -- 0x000B18 */ - u64 ce_pad_000B20[29]; /* 0x000B20 -- 0x000BF8 */ - - u64 ce_msg_buf_parity[35]; /* 0x000C00 -- 0x000D18 */ - u64 ce_pad_000D20[29]; /* 0x000D20 -- 0x000DF8 */ - - u64 ce_pad_000E00[576]; /* 0x000E00 -- 0x001FF8 */ - - /* - * LSI : LSI's PCI Express Link Registers (Link#1 and Link#2) - * Link#1 MMRs at start at 0x002000, Link#2 MMRs at 0x003000 - * NOTE: the comment offsets at far right: let 'z' = {2 or 3} - */ - #define ce_lsi(link_num) ce_lsi[link_num-1] - struct ce_lsi_reg { - u64 ce_lsi_lpu_id; /* 0x00z000 */ - u64 ce_lsi_rst; /* 0x00z008 */ - u64 ce_lsi_dbg_stat; /* 0x00z010 */ - u64 ce_lsi_dbg_cfg; /* 0x00z018 */ - u64 ce_lsi_ltssm_ctrl; /* 0x00z020 */ - u64 ce_lsi_lk_stat; /* 0x00z028 */ - u64 ce_pad_00z030[2]; /* 0x00z030 -- 0x00z038 */ - u64 ce_lsi_int_and_stat; /* 0x00z040 */ - u64 ce_lsi_int_mask; /* 0x00z048 */ - u64 ce_pad_00z050[22]; /* 0x00z050 -- 0x00z0F8 */ - u64 ce_lsi_lk_perf_cnt_sel; /* 0x00z100 */ - u64 ce_pad_00z108; /* 0x00z108 */ - u64 ce_lsi_lk_perf_cnt_ctrl; /* 0x00z110 */ - u64 ce_pad_00z118; /* 0x00z118 */ - u64 ce_lsi_lk_perf_cnt1; /* 0x00z120 */ - u64 ce_lsi_lk_perf_cnt1_test; /* 0x00z128 */ - u64 ce_lsi_lk_perf_cnt2; /* 0x00z130 */ - u64 ce_lsi_lk_perf_cnt2_test; /* 0x00z138 */ - u64 ce_pad_00z140[24]; /* 0x00z140 -- 0x00z1F8 */ - u64 ce_lsi_lk_lyr_cfg; /* 0x00z200 */ - u64 ce_lsi_lk_lyr_status; /* 0x00z208 */ - u64 ce_lsi_lk_lyr_int_stat; /* 0x00z210 */ - u64 ce_lsi_lk_ly_int_stat_test; /* 0x00z218 */ - u64 ce_lsi_lk_ly_int_stat_mask; /* 0x00z220 */ - u64 ce_pad_00z228[3]; /* 0x00z228 -- 0x00z238 */ - u64 ce_lsi_fc_upd_ctl; /* 0x00z240 */ - u64 ce_pad_00z248[3]; /* 0x00z248 -- 0x00z258 */ - u64 ce_lsi_flw_ctl_upd_to_timer; /* 0x00z260 */ - u64 ce_lsi_flw_ctl_upd_timer0; /* 0x00z268 */ - u64 ce_lsi_flw_ctl_upd_timer1; /* 0x00z270 */ - u64 ce_pad_00z278[49]; /* 0x00z278 -- 0x00z3F8 */ - u64 ce_lsi_freq_nak_lat_thrsh; /* 0x00z400 */ - u64 ce_lsi_ack_nak_lat_tmr; /* 0x00z408 */ - u64 ce_lsi_rply_tmr_thr; /* 0x00z410 */ - u64 ce_lsi_rply_tmr; /* 0x00z418 */ - u64 ce_lsi_rply_num_stat; /* 0x00z420 */ - u64 ce_lsi_rty_buf_max_addr; /* 0x00z428 */ - u64 ce_lsi_rty_fifo_ptr; /* 0x00z430 */ - u64 ce_lsi_rty_fifo_rd_wr_ptr; /* 0x00z438 */ - u64 ce_lsi_rty_fifo_cred; /* 0x00z440 */ - u64 ce_lsi_seq_cnt; /* 0x00z448 */ - u64 ce_lsi_ack_sent_seq_num; /* 0x00z450 */ - u64 ce_lsi_seq_cnt_fifo_max_addr; /* 0x00z458 */ - u64 ce_lsi_seq_cnt_fifo_ptr; /* 0x00z460 */ - u64 ce_lsi_seq_cnt_rd_wr_ptr; /* 0x00z468 */ - u64 ce_lsi_tx_lk_ts_ctl; /* 0x00z470 */ - u64 ce_pad_00z478; /* 0x00z478 */ - u64 ce_lsi_mem_addr_ctl; /* 0x00z480 */ - u64 ce_lsi_mem_d_ld0; /* 0x00z488 */ - u64 ce_lsi_mem_d_ld1; /* 0x00z490 */ - u64 ce_lsi_mem_d_ld2; /* 0x00z498 */ - u64 ce_lsi_mem_d_ld3; /* 0x00z4A0 */ - u64 ce_lsi_mem_d_ld4; /* 0x00z4A8 */ - u64 ce_pad_00z4B0[2]; /* 0x00z4B0 -- 0x00z4B8 */ - u64 ce_lsi_rty_d_cnt; /* 0x00z4C0 */ - u64 ce_lsi_seq_buf_cnt; /* 0x00z4C8 */ - u64 ce_lsi_seq_buf_bt_d; /* 0x00z4D0 */ - u64 ce_pad_00z4D8; /* 0x00z4D8 */ - u64 ce_lsi_ack_lat_thr; /* 0x00z4E0 */ - u64 ce_pad_00z4E8[3]; /* 0x00z4E8 -- 0x00z4F8 */ - u64 ce_lsi_nxt_rcv_seq_1_cntr; /* 0x00z500 */ - u64 ce_lsi_unsp_dllp_rcvd; /* 0x00z508 */ - u64 ce_lsi_rcv_lk_ts_ctl; /* 0x00z510 */ - u64 ce_pad_00z518[29]; /* 0x00z518 -- 0x00z5F8 */ - u64 ce_lsi_phy_lyr_cfg; /* 0x00z600 */ - u64 ce_pad_00z608; /* 0x00z608 */ - u64 ce_lsi_phy_lyr_int_stat; /* 0x00z610 */ - u64 ce_lsi_phy_lyr_int_stat_test; /* 0x00z618 */ - u64 ce_lsi_phy_lyr_int_mask; /* 0x00z620 */ - u64 ce_pad_00z628[11]; /* 0x00z628 -- 0x00z678 */ - u64 ce_lsi_rcv_phy_cfg; /* 0x00z680 */ - u64 ce_lsi_rcv_phy_stat1; /* 0x00z688 */ - u64 ce_lsi_rcv_phy_stat2; /* 0x00z690 */ - u64 ce_lsi_rcv_phy_stat3; /* 0x00z698 */ - u64 ce_lsi_rcv_phy_int_stat; /* 0x00z6A0 */ - u64 ce_lsi_rcv_phy_int_stat_test; /* 0x00z6A8 */ - u64 ce_lsi_rcv_phy_int_mask; /* 0x00z6B0 */ - u64 ce_pad_00z6B8[9]; /* 0x00z6B8 -- 0x00z6F8 */ - u64 ce_lsi_tx_phy_cfg; /* 0x00z700 */ - u64 ce_lsi_tx_phy_stat; /* 0x00z708 */ - u64 ce_lsi_tx_phy_int_stat; /* 0x00z710 */ - u64 ce_lsi_tx_phy_int_stat_test; /* 0x00z718 */ - u64 ce_lsi_tx_phy_int_mask; /* 0x00z720 */ - u64 ce_lsi_tx_phy_stat2; /* 0x00z728 */ - u64 ce_pad_00z730[10]; /* 0x00z730 -- 0x00z77F */ - u64 ce_lsi_ltssm_cfg1; /* 0x00z780 */ - u64 ce_lsi_ltssm_cfg2; /* 0x00z788 */ - u64 ce_lsi_ltssm_cfg3; /* 0x00z790 */ - u64 ce_lsi_ltssm_cfg4; /* 0x00z798 */ - u64 ce_lsi_ltssm_cfg5; /* 0x00z7A0 */ - u64 ce_lsi_ltssm_stat1; /* 0x00z7A8 */ - u64 ce_lsi_ltssm_stat2; /* 0x00z7B0 */ - u64 ce_lsi_ltssm_int_stat; /* 0x00z7B8 */ - u64 ce_lsi_ltssm_int_stat_test; /* 0x00z7C0 */ - u64 ce_lsi_ltssm_int_mask; /* 0x00z7C8 */ - u64 ce_lsi_ltssm_stat_wr_en; /* 0x00z7D0 */ - u64 ce_pad_00z7D8[5]; /* 0x00z7D8 -- 0x00z7F8 */ - u64 ce_lsi_gb_cfg1; /* 0x00z800 */ - u64 ce_lsi_gb_cfg2; /* 0x00z808 */ - u64 ce_lsi_gb_cfg3; /* 0x00z810 */ - u64 ce_lsi_gb_cfg4; /* 0x00z818 */ - u64 ce_lsi_gb_stat; /* 0x00z820 */ - u64 ce_lsi_gb_int_stat; /* 0x00z828 */ - u64 ce_lsi_gb_int_stat_test; /* 0x00z830 */ - u64 ce_lsi_gb_int_mask; /* 0x00z838 */ - u64 ce_lsi_gb_pwr_dn1; /* 0x00z840 */ - u64 ce_lsi_gb_pwr_dn2; /* 0x00z848 */ - u64 ce_pad_00z850[246]; /* 0x00z850 -- 0x00zFF8 */ - } ce_lsi[2]; - - u64 ce_pad_004000[10]; /* 0x004000 -- 0x004048 */ - - /* - * CRM: Coretalk Receive Module Registers - */ - u64 ce_crm_debug_mux; /* 0x004050 */ - u64 ce_pad_004058; /* 0x004058 */ - u64 ce_crm_ssp_err_cmd_wrd; /* 0x004060 */ - u64 ce_crm_ssp_err_addr; /* 0x004068 */ - u64 ce_crm_ssp_err_syn; /* 0x004070 */ - - u64 ce_pad_004078[499]; /* 0x004078 -- 0x005008 */ - - /* - * CXM: Coretalk Xmit Module Registers - */ - u64 ce_cxm_dyn_credit_status; /* 0x005010 */ - u64 ce_cxm_last_credit_status; /* 0x005018 */ - u64 ce_cxm_credit_limit; /* 0x005020 */ - u64 ce_cxm_force_credit; /* 0x005028 */ - u64 ce_cxm_disable_bypass; /* 0x005030 */ - u64 ce_pad_005038[3]; /* 0x005038 -- 0x005048 */ - u64 ce_cxm_debug_mux; /* 0x005050 */ - - u64 ce_pad_005058[501]; /* 0x005058 -- 0x005FF8 */ - - /* - * DTL: Downstream Transaction Layer Regs (Link#1 and Link#2) - * DTL: Link#1 MMRs at start at 0x006000, Link#2 MMRs at 0x008000 - * DTL: the comment offsets at far right: let 'y' = {6 or 8} - * - * UTL: Downstream Transaction Layer Regs (Link#1 and Link#2) - * UTL: Link#1 MMRs at start at 0x007000, Link#2 MMRs at 0x009000 - * UTL: the comment offsets at far right: let 'z' = {7 or 9} - */ - #define ce_dtl(link_num) ce_dtl_utl[link_num-1] - #define ce_utl(link_num) ce_dtl_utl[link_num-1] - struct ce_dtl_utl_reg { - /* DTL */ - u64 ce_dtl_dtdr_credit_limit; /* 0x00y000 */ - u64 ce_dtl_dtdr_credit_force; /* 0x00y008 */ - u64 ce_dtl_dyn_credit_status; /* 0x00y010 */ - u64 ce_dtl_dtl_last_credit_stat; /* 0x00y018 */ - u64 ce_dtl_dtl_ctrl; /* 0x00y020 */ - u64 ce_pad_00y028[5]; /* 0x00y028 -- 0x00y048 */ - u64 ce_dtl_debug_sel; /* 0x00y050 */ - u64 ce_pad_00y058[501]; /* 0x00y058 -- 0x00yFF8 */ - - /* UTL */ - u64 ce_utl_utl_ctrl; /* 0x00z000 */ - u64 ce_utl_debug_sel; /* 0x00z008 */ - u64 ce_pad_00z010[510]; /* 0x00z010 -- 0x00zFF8 */ - } ce_dtl_utl[2]; - - u64 ce_pad_00A000[514]; /* 0x00A000 -- 0x00B008 */ - - /* - * URE: Upstream Request Engine - */ - u64 ce_ure_dyn_credit_status; /* 0x00B010 */ - u64 ce_ure_last_credit_status; /* 0x00B018 */ - u64 ce_ure_credit_limit; /* 0x00B020 */ - u64 ce_pad_00B028; /* 0x00B028 */ - u64 ce_ure_control; /* 0x00B030 */ - u64 ce_ure_status; /* 0x00B038 */ - u64 ce_pad_00B040[2]; /* 0x00B040 -- 0x00B048 */ - u64 ce_ure_debug_sel; /* 0x00B050 */ - u64 ce_ure_pcie_debug_sel; /* 0x00B058 */ - u64 ce_ure_ssp_err_cmd_wrd; /* 0x00B060 */ - u64 ce_ure_ssp_err_addr; /* 0x00B068 */ - u64 ce_ure_page_map; /* 0x00B070 */ - u64 ce_ure_dir_map[TIOCE_NUM_PORTS]; /* 0x00B078 */ - u64 ce_ure_pipe_sel1; /* 0x00B088 */ - u64 ce_ure_pipe_mask1; /* 0x00B090 */ - u64 ce_ure_pipe_sel2; /* 0x00B098 */ - u64 ce_ure_pipe_mask2; /* 0x00B0A0 */ - u64 ce_ure_pcie1_credits_sent; /* 0x00B0A8 */ - u64 ce_ure_pcie1_credits_used; /* 0x00B0B0 */ - u64 ce_ure_pcie1_credit_limit; /* 0x00B0B8 */ - u64 ce_ure_pcie2_credits_sent; /* 0x00B0C0 */ - u64 ce_ure_pcie2_credits_used; /* 0x00B0C8 */ - u64 ce_ure_pcie2_credit_limit; /* 0x00B0D0 */ - u64 ce_ure_pcie_force_credit; /* 0x00B0D8 */ - u64 ce_ure_rd_tnum_val; /* 0x00B0E0 */ - u64 ce_ure_rd_tnum_rsp_rcvd; /* 0x00B0E8 */ - u64 ce_ure_rd_tnum_esent_timer; /* 0x00B0F0 */ - u64 ce_ure_rd_tnum_error; /* 0x00B0F8 */ - u64 ce_ure_rd_tnum_first_cl; /* 0x00B100 */ - u64 ce_ure_rd_tnum_link_buf; /* 0x00B108 */ - u64 ce_ure_wr_tnum_val; /* 0x00B110 */ - u64 ce_ure_sram_err_addr0; /* 0x00B118 */ - u64 ce_ure_sram_err_addr1; /* 0x00B120 */ - u64 ce_ure_sram_err_addr2; /* 0x00B128 */ - u64 ce_ure_sram_rd_addr0; /* 0x00B130 */ - u64 ce_ure_sram_rd_addr1; /* 0x00B138 */ - u64 ce_ure_sram_rd_addr2; /* 0x00B140 */ - u64 ce_ure_sram_wr_addr0; /* 0x00B148 */ - u64 ce_ure_sram_wr_addr1; /* 0x00B150 */ - u64 ce_ure_sram_wr_addr2; /* 0x00B158 */ - u64 ce_ure_buf_flush10; /* 0x00B160 */ - u64 ce_ure_buf_flush11; /* 0x00B168 */ - u64 ce_ure_buf_flush12; /* 0x00B170 */ - u64 ce_ure_buf_flush13; /* 0x00B178 */ - u64 ce_ure_buf_flush20; /* 0x00B180 */ - u64 ce_ure_buf_flush21; /* 0x00B188 */ - u64 ce_ure_buf_flush22; /* 0x00B190 */ - u64 ce_ure_buf_flush23; /* 0x00B198 */ - u64 ce_ure_pcie_control1; /* 0x00B1A0 */ - u64 ce_ure_pcie_control2; /* 0x00B1A8 */ - - u64 ce_pad_00B1B0[458]; /* 0x00B1B0 -- 0x00BFF8 */ - - /* Upstream Data Buffer, Port1 */ - struct ce_ure_maint_ups_dat1_data { - u64 data63_0[512]; /* 0x00C000 -- 0x00CFF8 */ - u64 data127_64[512]; /* 0x00D000 -- 0x00DFF8 */ - u64 parity[512]; /* 0x00E000 -- 0x00EFF8 */ - } ce_ure_maint_ups_dat1; - - /* Upstream Header Buffer, Port1 */ - struct ce_ure_maint_ups_hdr1_data { - u64 data63_0[512]; /* 0x00F000 -- 0x00FFF8 */ - u64 data127_64[512]; /* 0x010000 -- 0x010FF8 */ - u64 parity[512]; /* 0x011000 -- 0x011FF8 */ - } ce_ure_maint_ups_hdr1; - - /* Upstream Data Buffer, Port2 */ - struct ce_ure_maint_ups_dat2_data { - u64 data63_0[512]; /* 0x012000 -- 0x012FF8 */ - u64 data127_64[512]; /* 0x013000 -- 0x013FF8 */ - u64 parity[512]; /* 0x014000 -- 0x014FF8 */ - } ce_ure_maint_ups_dat2; - - /* Upstream Header Buffer, Port2 */ - struct ce_ure_maint_ups_hdr2_data { - u64 data63_0[512]; /* 0x015000 -- 0x015FF8 */ - u64 data127_64[512]; /* 0x016000 -- 0x016FF8 */ - u64 parity[512]; /* 0x017000 -- 0x017FF8 */ - } ce_ure_maint_ups_hdr2; - - /* Downstream Data Buffer */ - struct ce_ure_maint_dns_dat_data { - u64 data63_0[512]; /* 0x018000 -- 0x018FF8 */ - u64 data127_64[512]; /* 0x019000 -- 0x019FF8 */ - u64 parity[512]; /* 0x01A000 -- 0x01AFF8 */ - } ce_ure_maint_dns_dat; - - /* Downstream Header Buffer */ - struct ce_ure_maint_dns_hdr_data { - u64 data31_0[64]; /* 0x01B000 -- 0x01B1F8 */ - u64 data95_32[64]; /* 0x01B200 -- 0x01B3F8 */ - u64 parity[64]; /* 0x01B400 -- 0x01B5F8 */ - } ce_ure_maint_dns_hdr; - - /* RCI Buffer Data */ - struct ce_ure_maint_rci_data { - u64 data41_0[64]; /* 0x01B600 -- 0x01B7F8 */ - u64 data69_42[64]; /* 0x01B800 -- 0x01B9F8 */ - } ce_ure_maint_rci; - - /* Response Queue */ - u64 ce_ure_maint_rspq[64]; /* 0x01BA00 -- 0x01BBF8 */ - - u64 ce_pad_01C000[4224]; /* 0x01BC00 -- 0x023FF8 */ - - /* Admin Build-a-Packet Buffer */ - struct ce_adm_maint_bap_buf_data { - u64 data63_0[258]; /* 0x024000 -- 0x024808 */ - u64 data127_64[258]; /* 0x024810 -- 0x025018 */ - u64 parity[258]; /* 0x025020 -- 0x025828 */ - } ce_adm_maint_bap_buf; - - u64 ce_pad_025830[5370]; /* 0x025830 -- 0x02FFF8 */ - - /* URE: 40bit PMU ATE Buffer */ /* 0x030000 -- 0x037FF8 */ - u64 ce_ure_ate40[TIOCE_NUM_M40_ATES]; - - /* URE: 32/40bit PMU ATE Buffer */ /* 0x038000 -- 0x03BFF8 */ - u64 ce_ure_ate3240[TIOCE_NUM_M3240_ATES]; - - u64 ce_pad_03C000[2050]; /* 0x03C000 -- 0x040008 */ - - /* - * DRE: Down Stream Request Engine - */ - u64 ce_dre_dyn_credit_status1; /* 0x040010 */ - u64 ce_dre_dyn_credit_status2; /* 0x040018 */ - u64 ce_dre_last_credit_status1; /* 0x040020 */ - u64 ce_dre_last_credit_status2; /* 0x040028 */ - u64 ce_dre_credit_limit1; /* 0x040030 */ - u64 ce_dre_credit_limit2; /* 0x040038 */ - u64 ce_dre_force_credit1; /* 0x040040 */ - u64 ce_dre_force_credit2; /* 0x040048 */ - u64 ce_dre_debug_mux1; /* 0x040050 */ - u64 ce_dre_debug_mux2; /* 0x040058 */ - u64 ce_dre_ssp_err_cmd_wrd; /* 0x040060 */ - u64 ce_dre_ssp_err_addr; /* 0x040068 */ - u64 ce_dre_comp_err_cmd_wrd; /* 0x040070 */ - u64 ce_dre_comp_err_addr; /* 0x040078 */ - u64 ce_dre_req_status; /* 0x040080 */ - u64 ce_dre_config1; /* 0x040088 */ - u64 ce_dre_config2; /* 0x040090 */ - u64 ce_dre_config_req_status; /* 0x040098 */ - u64 ce_pad_0400A0[12]; /* 0x0400A0 -- 0x0400F8 */ - u64 ce_dre_dyn_fifo; /* 0x040100 */ - u64 ce_pad_040108[3]; /* 0x040108 -- 0x040118 */ - u64 ce_dre_last_fifo; /* 0x040120 */ - - u64 ce_pad_040128[27]; /* 0x040128 -- 0x0401F8 */ - - /* DRE Downstream Head Queue */ - struct ce_dre_maint_ds_head_queue { - u64 data63_0[32]; /* 0x040200 -- 0x0402F8 */ - u64 data127_64[32]; /* 0x040300 -- 0x0403F8 */ - u64 parity[32]; /* 0x040400 -- 0x0404F8 */ - } ce_dre_maint_ds_head_q; - - u64 ce_pad_040500[352]; /* 0x040500 -- 0x040FF8 */ - - /* DRE Downstream Data Queue */ - struct ce_dre_maint_ds_data_queue { - u64 data63_0[256]; /* 0x041000 -- 0x0417F8 */ - u64 ce_pad_041800[256]; /* 0x041800 -- 0x041FF8 */ - u64 data127_64[256]; /* 0x042000 -- 0x0427F8 */ - u64 ce_pad_042800[256]; /* 0x042800 -- 0x042FF8 */ - u64 parity[256]; /* 0x043000 -- 0x0437F8 */ - u64 ce_pad_043800[256]; /* 0x043800 -- 0x043FF8 */ - } ce_dre_maint_ds_data_q; - - /* DRE URE Upstream Response Queue */ - struct ce_dre_maint_ure_us_rsp_queue { - u64 data63_0[8]; /* 0x044000 -- 0x044038 */ - u64 ce_pad_044040[24]; /* 0x044040 -- 0x0440F8 */ - u64 data127_64[8]; /* 0x044100 -- 0x044138 */ - u64 ce_pad_044140[24]; /* 0x044140 -- 0x0441F8 */ - u64 parity[8]; /* 0x044200 -- 0x044238 */ - u64 ce_pad_044240[24]; /* 0x044240 -- 0x0442F8 */ - } ce_dre_maint_ure_us_rsp_q; - - u64 ce_dre_maint_us_wrt_rsp[32];/* 0x044300 -- 0x0443F8 */ - - u64 ce_end_of_struct; /* 0x044400 */ -} tioce_t; - -/* ce_lsiX_gb_cfg1 register bit masks & shifts */ -#define CE_LSI_GB_CFG1_RXL0S_THS_SHFT 0 -#define CE_LSI_GB_CFG1_RXL0S_THS_MASK (0xffULL << 0) -#define CE_LSI_GB_CFG1_RXL0S_SMP_SHFT 8 -#define CE_LSI_GB_CFG1_RXL0S_SMP_MASK (0xfULL << 8); -#define CE_LSI_GB_CFG1_RXL0S_ADJ_SHFT 12 -#define CE_LSI_GB_CFG1_RXL0S_ADJ_MASK (0x7ULL << 12) -#define CE_LSI_GB_CFG1_RXL0S_FLT_SHFT 15 -#define CE_LSI_GB_CFG1_RXL0S_FLT_MASK (0x1ULL << 15) -#define CE_LSI_GB_CFG1_LPBK_SEL_SHFT 16 -#define CE_LSI_GB_CFG1_LPBK_SEL_MASK (0x3ULL << 16) -#define CE_LSI_GB_CFG1_LPBK_EN_SHFT 18 -#define CE_LSI_GB_CFG1_LPBK_EN_MASK (0x1ULL << 18) -#define CE_LSI_GB_CFG1_RVRS_LB_SHFT 19 -#define CE_LSI_GB_CFG1_RVRS_LB_MASK (0x1ULL << 19) -#define CE_LSI_GB_CFG1_RVRS_CLK_SHFT 20 -#define CE_LSI_GB_CFG1_RVRS_CLK_MASK (0x3ULL << 20) -#define CE_LSI_GB_CFG1_SLF_TS_SHFT 24 -#define CE_LSI_GB_CFG1_SLF_TS_MASK (0xfULL << 24) - -/* ce_adm_int_mask/ce_adm_int_status register bit defines */ -#define CE_ADM_INT_CE_ERROR_SHFT 0 -#define CE_ADM_INT_LSI1_IP_ERROR_SHFT 1 -#define CE_ADM_INT_LSI2_IP_ERROR_SHFT 2 -#define CE_ADM_INT_PCIE_ERROR_SHFT 3 -#define CE_ADM_INT_PORT1_HOTPLUG_EVENT_SHFT 4 -#define CE_ADM_INT_PORT2_HOTPLUG_EVENT_SHFT 5 -#define CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT 6 -#define CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT 7 -#define CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT 8 -#define CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT 9 -#define CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT 10 -#define CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT 11 -#define CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT 12 -#define CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT 13 -#define CE_ADM_INT_PCIE_MSG_SHFT 14 /*see int_dest_14*/ -#define CE_ADM_INT_PCIE_MSG_SLOT_0_SHFT 14 -#define CE_ADM_INT_PCIE_MSG_SLOT_1_SHFT 15 -#define CE_ADM_INT_PCIE_MSG_SLOT_2_SHFT 16 -#define CE_ADM_INT_PCIE_MSG_SLOT_3_SHFT 17 -#define CE_ADM_INT_PORT1_PM_PME_MSG_SHFT 22 -#define CE_ADM_INT_PORT2_PM_PME_MSG_SHFT 23 - -/* ce_adm_force_int register bit defines */ -#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT 0 -#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT 1 -#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT 2 -#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT 3 -#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT 4 -#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT 5 -#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT 6 -#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT 7 -#define CE_ADM_FORCE_INT_ALWAYS_SHFT 8 - -/* ce_adm_int_dest register bit masks & shifts */ -#define INTR_VECTOR_SHFT 56 - -/* ce_adm_error_mask and ce_adm_error_summary register bit masks */ -#define CE_ADM_ERR_CRM_SSP_REQ_INVALID (0x1ULL << 0) -#define CE_ADM_ERR_SSP_REQ_HEADER (0x1ULL << 1) -#define CE_ADM_ERR_SSP_RSP_HEADER (0x1ULL << 2) -#define CE_ADM_ERR_SSP_PROTOCOL_ERROR (0x1ULL << 3) -#define CE_ADM_ERR_SSP_SBE (0x1ULL << 4) -#define CE_ADM_ERR_SSP_MBE (0x1ULL << 5) -#define CE_ADM_ERR_CXM_CREDIT_OFLOW (0x1ULL << 6) -#define CE_ADM_ERR_DRE_SSP_REQ_INVAL (0x1ULL << 7) -#define CE_ADM_ERR_SSP_REQ_LONG (0x1ULL << 8) -#define CE_ADM_ERR_SSP_REQ_OFLOW (0x1ULL << 9) -#define CE_ADM_ERR_SSP_REQ_SHORT (0x1ULL << 10) -#define CE_ADM_ERR_SSP_REQ_SIDEBAND (0x1ULL << 11) -#define CE_ADM_ERR_SSP_REQ_ADDR_ERR (0x1ULL << 12) -#define CE_ADM_ERR_SSP_REQ_BAD_BE (0x1ULL << 13) -#define CE_ADM_ERR_PCIE_COMPL_TIMEOUT (0x1ULL << 14) -#define CE_ADM_ERR_PCIE_UNEXP_COMPL (0x1ULL << 15) -#define CE_ADM_ERR_PCIE_ERR_COMPL (0x1ULL << 16) -#define CE_ADM_ERR_DRE_CREDIT_OFLOW (0x1ULL << 17) -#define CE_ADM_ERR_DRE_SRAM_PE (0x1ULL << 18) -#define CE_ADM_ERR_SSP_RSP_INVALID (0x1ULL << 19) -#define CE_ADM_ERR_SSP_RSP_LONG (0x1ULL << 20) -#define CE_ADM_ERR_SSP_RSP_SHORT (0x1ULL << 21) -#define CE_ADM_ERR_SSP_RSP_SIDEBAND (0x1ULL << 22) -#define CE_ADM_ERR_URE_SSP_RSP_UNEXP (0x1ULL << 23) -#define CE_ADM_ERR_URE_SSP_WR_REQ_TIMEOUT (0x1ULL << 24) -#define CE_ADM_ERR_URE_SSP_RD_REQ_TIMEOUT (0x1ULL << 25) -#define CE_ADM_ERR_URE_ATE3240_PAGE_FAULT (0x1ULL << 26) -#define CE_ADM_ERR_URE_ATE40_PAGE_FAULT (0x1ULL << 27) -#define CE_ADM_ERR_URE_CREDIT_OFLOW (0x1ULL << 28) -#define CE_ADM_ERR_URE_SRAM_PE (0x1ULL << 29) -#define CE_ADM_ERR_ADM_SSP_RSP_UNEXP (0x1ULL << 30) -#define CE_ADM_ERR_ADM_SSP_REQ_TIMEOUT (0x1ULL << 31) -#define CE_ADM_ERR_MMR_ACCESS_ERROR (0x1ULL << 32) -#define CE_ADM_ERR_MMR_ADDR_ERROR (0x1ULL << 33) -#define CE_ADM_ERR_ADM_CREDIT_OFLOW (0x1ULL << 34) -#define CE_ADM_ERR_ADM_SRAM_PE (0x1ULL << 35) -#define CE_ADM_ERR_DTL1_MIN_PDATA_CREDIT_ERR (0x1ULL << 36) -#define CE_ADM_ERR_DTL1_INF_COMPL_CRED_UPDT_ERR (0x1ULL << 37) -#define CE_ADM_ERR_DTL1_INF_POSTED_CRED_UPDT_ERR (0x1ULL << 38) -#define CE_ADM_ERR_DTL1_INF_NPOSTED_CRED_UPDT_ERR (0x1ULL << 39) -#define CE_ADM_ERR_DTL1_COMP_HD_CRED_MAX_ERR (0x1ULL << 40) -#define CE_ADM_ERR_DTL1_COMP_D_CRED_MAX_ERR (0x1ULL << 41) -#define CE_ADM_ERR_DTL1_NPOSTED_HD_CRED_MAX_ERR (0x1ULL << 42) -#define CE_ADM_ERR_DTL1_NPOSTED_D_CRED_MAX_ERR (0x1ULL << 43) -#define CE_ADM_ERR_DTL1_POSTED_HD_CRED_MAX_ERR (0x1ULL << 44) -#define CE_ADM_ERR_DTL1_POSTED_D_CRED_MAX_ERR (0x1ULL << 45) -#define CE_ADM_ERR_DTL2_MIN_PDATA_CREDIT_ERR (0x1ULL << 46) -#define CE_ADM_ERR_DTL2_INF_COMPL_CRED_UPDT_ERR (0x1ULL << 47) -#define CE_ADM_ERR_DTL2_INF_POSTED_CRED_UPDT_ERR (0x1ULL << 48) -#define CE_ADM_ERR_DTL2_INF_NPOSTED_CRED_UPDT_ERR (0x1ULL << 49) -#define CE_ADM_ERR_DTL2_COMP_HD_CRED_MAX_ERR (0x1ULL << 50) -#define CE_ADM_ERR_DTL2_COMP_D_CRED_MAX_ERR (0x1ULL << 51) -#define CE_ADM_ERR_DTL2_NPOSTED_HD_CRED_MAX_ERR (0x1ULL << 52) -#define CE_ADM_ERR_DTL2_NPOSTED_D_CRED_MAX_ERR (0x1ULL << 53) -#define CE_ADM_ERR_DTL2_POSTED_HD_CRED_MAX_ERR (0x1ULL << 54) -#define CE_ADM_ERR_DTL2_POSTED_D_CRED_MAX_ERR (0x1ULL << 55) -#define CE_ADM_ERR_PORT1_PCIE_COR_ERR (0x1ULL << 56) -#define CE_ADM_ERR_PORT1_PCIE_NFAT_ERR (0x1ULL << 57) -#define CE_ADM_ERR_PORT1_PCIE_FAT_ERR (0x1ULL << 58) -#define CE_ADM_ERR_PORT2_PCIE_COR_ERR (0x1ULL << 59) -#define CE_ADM_ERR_PORT2_PCIE_NFAT_ERR (0x1ULL << 60) -#define CE_ADM_ERR_PORT2_PCIE_FAT_ERR (0x1ULL << 61) - -/* ce_adm_ure_ups_buf_barrier_flush register bit masks and shifts */ -#define FLUSH_SEL_PORT1_PIPE0_SHFT 0 -#define FLUSH_SEL_PORT1_PIPE1_SHFT 4 -#define FLUSH_SEL_PORT1_PIPE2_SHFT 8 -#define FLUSH_SEL_PORT1_PIPE3_SHFT 12 -#define FLUSH_SEL_PORT2_PIPE0_SHFT 16 -#define FLUSH_SEL_PORT2_PIPE1_SHFT 20 -#define FLUSH_SEL_PORT2_PIPE2_SHFT 24 -#define FLUSH_SEL_PORT2_PIPE3_SHFT 28 - -/* ce_dre_config1 register bit masks and shifts */ -#define CE_DRE_RO_ENABLE (0x1ULL << 0) -#define CE_DRE_DYN_RO_ENABLE (0x1ULL << 1) -#define CE_DRE_SUP_CONFIG_COMP_ERROR (0x1ULL << 2) -#define CE_DRE_SUP_IO_COMP_ERROR (0x1ULL << 3) -#define CE_DRE_ADDR_MODE_SHFT 4 - -/* ce_dre_config_req_status register bit masks */ -#define CE_DRE_LAST_CONFIG_COMPLETION (0x7ULL << 0) -#define CE_DRE_DOWNSTREAM_CONFIG_ERROR (0x1ULL << 3) -#define CE_DRE_CONFIG_COMPLETION_VALID (0x1ULL << 4) -#define CE_DRE_CONFIG_REQUEST_ACTIVE (0x1ULL << 5) - -/* ce_ure_control register bit masks & shifts */ -#define CE_URE_RD_MRG_ENABLE (0x1ULL << 0) -#define CE_URE_WRT_MRG_ENABLE1 (0x1ULL << 4) -#define CE_URE_WRT_MRG_ENABLE2 (0x1ULL << 5) -#define CE_URE_WRT_MRG_TIMER_SHFT 12 -#define CE_URE_WRT_MRG_TIMER_MASK (0x7FFULL << CE_URE_WRT_MRG_TIMER_SHFT) -#define CE_URE_WRT_MRG_TIMER(x) (((u64)(x) << \ - CE_URE_WRT_MRG_TIMER_SHFT) & \ - CE_URE_WRT_MRG_TIMER_MASK) -#define CE_URE_RSPQ_BYPASS_DISABLE (0x1ULL << 24) -#define CE_URE_UPS_DAT1_PAR_DISABLE (0x1ULL << 32) -#define CE_URE_UPS_HDR1_PAR_DISABLE (0x1ULL << 33) -#define CE_URE_UPS_DAT2_PAR_DISABLE (0x1ULL << 34) -#define CE_URE_UPS_HDR2_PAR_DISABLE (0x1ULL << 35) -#define CE_URE_ATE_PAR_DISABLE (0x1ULL << 36) -#define CE_URE_RCI_PAR_DISABLE (0x1ULL << 37) -#define CE_URE_RSPQ_PAR_DISABLE (0x1ULL << 38) -#define CE_URE_DNS_DAT_PAR_DISABLE (0x1ULL << 39) -#define CE_URE_DNS_HDR_PAR_DISABLE (0x1ULL << 40) -#define CE_URE_MALFORM_DISABLE (0x1ULL << 44) -#define CE_URE_UNSUP_DISABLE (0x1ULL << 45) - -/* ce_ure_page_map register bit masks & shifts */ -#define CE_URE_ATE3240_ENABLE (0x1ULL << 0) -#define CE_URE_ATE40_ENABLE (0x1ULL << 1) -#define CE_URE_PAGESIZE_SHFT 4 -#define CE_URE_PAGESIZE_MASK (0x7ULL << CE_URE_PAGESIZE_SHFT) -#define CE_URE_4K_PAGESIZE (0x0ULL << CE_URE_PAGESIZE_SHFT) -#define CE_URE_16K_PAGESIZE (0x1ULL << CE_URE_PAGESIZE_SHFT) -#define CE_URE_64K_PAGESIZE (0x2ULL << CE_URE_PAGESIZE_SHFT) -#define CE_URE_128K_PAGESIZE (0x3ULL << CE_URE_PAGESIZE_SHFT) -#define CE_URE_256K_PAGESIZE (0x4ULL << CE_URE_PAGESIZE_SHFT) - -/* ce_ure_pipe_sel register bit masks & shifts */ -#define PKT_TRAFIC_SHRT 16 -#define BUS_SRC_ID_SHFT 8 -#define DEV_SRC_ID_SHFT 3 -#define FNC_SRC_ID_SHFT 0 -#define CE_URE_TC_MASK (0x07ULL << PKT_TRAFIC_SHRT) -#define CE_URE_BUS_MASK (0xFFULL << BUS_SRC_ID_SHFT) -#define CE_URE_DEV_MASK (0x1FULL << DEV_SRC_ID_SHFT) -#define CE_URE_FNC_MASK (0x07ULL << FNC_SRC_ID_SHFT) -#define CE_URE_PIPE_BUS(b) (((u64)(b) << BUS_SRC_ID_SHFT) & \ - CE_URE_BUS_MASK) -#define CE_URE_PIPE_DEV(d) (((u64)(d) << DEV_SRC_ID_SHFT) & \ - CE_URE_DEV_MASK) -#define CE_URE_PIPE_FNC(f) (((u64)(f) << FNC_SRC_ID_SHFT) & \ - CE_URE_FNC_MASK) - -#define CE_URE_SEL1_SHFT 0 -#define CE_URE_SEL2_SHFT 20 -#define CE_URE_SEL3_SHFT 40 -#define CE_URE_SEL1_MASK (0x7FFFFULL << CE_URE_SEL1_SHFT) -#define CE_URE_SEL2_MASK (0x7FFFFULL << CE_URE_SEL2_SHFT) -#define CE_URE_SEL3_MASK (0x7FFFFULL << CE_URE_SEL3_SHFT) - - -/* ce_ure_pipe_mask register bit masks & shifts */ -#define CE_URE_MASK1_SHFT 0 -#define CE_URE_MASK2_SHFT 20 -#define CE_URE_MASK3_SHFT 40 -#define CE_URE_MASK1_MASK (0x7FFFFULL << CE_URE_MASK1_SHFT) -#define CE_URE_MASK2_MASK (0x7FFFFULL << CE_URE_MASK2_SHFT) -#define CE_URE_MASK3_MASK (0x7FFFFULL << CE_URE_MASK3_SHFT) - - -/* ce_ure_pcie_control1 register bit masks & shifts */ -#define CE_URE_SI (0x1ULL << 0) -#define CE_URE_ELAL_SHFT 4 -#define CE_URE_ELAL_MASK (0x7ULL << CE_URE_ELAL_SHFT) -#define CE_URE_ELAL_SET(n) (((u64)(n) << CE_URE_ELAL_SHFT) & \ - CE_URE_ELAL_MASK) -#define CE_URE_ELAL1_SHFT 8 -#define CE_URE_ELAL1_MASK (0x7ULL << CE_URE_ELAL1_SHFT) -#define CE_URE_ELAL1_SET(n) (((u64)(n) << CE_URE_ELAL1_SHFT) & \ - CE_URE_ELAL1_MASK) -#define CE_URE_SCC (0x1ULL << 12) -#define CE_URE_PN1_SHFT 16 -#define CE_URE_PN1_MASK (0xFFULL << CE_URE_PN1_SHFT) -#define CE_URE_PN2_SHFT 24 -#define CE_URE_PN2_MASK (0xFFULL << CE_URE_PN2_SHFT) -#define CE_URE_PN1_SET(n) (((u64)(n) << CE_URE_PN1_SHFT) & \ - CE_URE_PN1_MASK) -#define CE_URE_PN2_SET(n) (((u64)(n) << CE_URE_PN2_SHFT) & \ - CE_URE_PN2_MASK) - -/* ce_ure_pcie_control2 register bit masks & shifts */ -#define CE_URE_ABP (0x1ULL << 0) -#define CE_URE_PCP (0x1ULL << 1) -#define CE_URE_MSP (0x1ULL << 2) -#define CE_URE_AIP (0x1ULL << 3) -#define CE_URE_PIP (0x1ULL << 4) -#define CE_URE_HPS (0x1ULL << 5) -#define CE_URE_HPC (0x1ULL << 6) -#define CE_URE_SPLV_SHFT 7 -#define CE_URE_SPLV_MASK (0xFFULL << CE_URE_SPLV_SHFT) -#define CE_URE_SPLV_SET(n) (((u64)(n) << CE_URE_SPLV_SHFT) & \ - CE_URE_SPLV_MASK) -#define CE_URE_SPLS_SHFT 15 -#define CE_URE_SPLS_MASK (0x3ULL << CE_URE_SPLS_SHFT) -#define CE_URE_SPLS_SET(n) (((u64)(n) << CE_URE_SPLS_SHFT) & \ - CE_URE_SPLS_MASK) -#define CE_URE_PSN1_SHFT 19 -#define CE_URE_PSN1_MASK (0x1FFFULL << CE_URE_PSN1_SHFT) -#define CE_URE_PSN2_SHFT 32 -#define CE_URE_PSN2_MASK (0x1FFFULL << CE_URE_PSN2_SHFT) -#define CE_URE_PSN1_SET(n) (((u64)(n) << CE_URE_PSN1_SHFT) & \ - CE_URE_PSN1_MASK) -#define CE_URE_PSN2_SET(n) (((u64)(n) << CE_URE_PSN2_SHFT) & \ - CE_URE_PSN2_MASK) - -/* - * PIO address space ranges for CE - */ - -/* Local CE Registers Space */ -#define CE_PIO_MMR 0x00000000 -#define CE_PIO_MMR_LEN 0x04000000 - -/* PCI Compatible Config Space */ -#define CE_PIO_CONFIG_SPACE 0x04000000 -#define CE_PIO_CONFIG_SPACE_LEN 0x04000000 - -/* PCI I/O Space Alias */ -#define CE_PIO_IO_SPACE_ALIAS 0x08000000 -#define CE_PIO_IO_SPACE_ALIAS_LEN 0x08000000 - -/* PCI Enhanced Config Space */ -#define CE_PIO_E_CONFIG_SPACE 0x10000000 -#define CE_PIO_E_CONFIG_SPACE_LEN 0x10000000 - -/* PCI I/O Space */ -#define CE_PIO_IO_SPACE 0x100000000 -#define CE_PIO_IO_SPACE_LEN 0x100000000 - -/* PCI MEM Space */ -#define CE_PIO_MEM_SPACE 0x200000000 -#define CE_PIO_MEM_SPACE_LEN TIO_HWIN_SIZE - - -/* - * CE PCI Enhanced Config Space shifts & masks - */ -#define CE_E_CONFIG_BUS_SHFT 20 -#define CE_E_CONFIG_BUS_MASK (0xFF << CE_E_CONFIG_BUS_SHFT) -#define CE_E_CONFIG_DEVICE_SHFT 15 -#define CE_E_CONFIG_DEVICE_MASK (0x1F << CE_E_CONFIG_DEVICE_SHFT) -#define CE_E_CONFIG_FUNC_SHFT 12 -#define CE_E_CONFIG_FUNC_MASK (0x7 << CE_E_CONFIG_FUNC_SHFT) - -#endif /* __ASM_IA64_SN_TIOCE_H__ */ diff --git a/include/asm-ia64/sn/tioce_provider.h b/include/asm-ia64/sn/tioce_provider.h deleted file mode 100644 index 32c32f30b099..000000000000 --- a/include/asm-ia64/sn/tioce_provider.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_CE_PROVIDER_H -#define _ASM_IA64_SN_CE_PROVIDER_H - -#include -#include - -/* - * Common TIOCE structure shared between the prom and kernel - * - * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES TO THE - * PROM VERSION. - */ -struct tioce_common { - struct pcibus_bussoft ce_pcibus; /* common pciio header */ - - u32 ce_rev; - u64 ce_kernel_private; - u64 ce_prom_private; -}; - -struct tioce_kernel { - struct tioce_common *ce_common; - spinlock_t ce_lock; - struct list_head ce_dmamap_list; - - u64 ce_ate40_shadow[TIOCE_NUM_M40_ATES]; - u64 ce_ate3240_shadow[TIOCE_NUM_M3240_ATES]; - u32 ce_ate3240_pagesize; - - u8 ce_port1_secondary; - - /* per-port resources */ - struct { - int dirmap_refcnt; - u64 dirmap_shadow; - } ce_port[TIOCE_NUM_PORTS]; -}; - -struct tioce_dmamap { - struct list_head ce_dmamap_list; /* headed by tioce_kernel */ - u32 refcnt; - - u64 nbytes; /* # bytes mapped */ - - u64 ct_start; /* coretalk start address */ - u64 pci_start; /* bus start address */ - - u64 __iomem *ate_hw;/* hw ptr of first ate in map */ - u64 *ate_shadow; /* shadow ptr of firat ate */ - u16 ate_count; /* # ate's in the map */ -}; - -extern int tioce_init_provider(void); - -#endif /* __ASM_IA64_SN_CE_PROVIDER_H */ diff --git a/include/asm-ia64/sn/tiocp.h b/include/asm-ia64/sn/tiocp.h deleted file mode 100644 index e8ad0bb5b6c5..000000000000 --- a/include/asm-ia64/sn/tiocp.h +++ /dev/null @@ -1,257 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003-2005 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_PCI_TIOCP_H -#define _ASM_IA64_SN_PCI_TIOCP_H - -#define TIOCP_HOST_INTR_ADDR 0x003FFFFFFFFFFFFFUL -#define TIOCP_PCI64_CMDTYPE_MEM (0x1ull << 60) -#define TIOCP_PCI64_CMDTYPE_MSI (0x3ull << 60) - - -/***************************************************************************** - *********************** TIOCP MMR structure mapping *************************** - *****************************************************************************/ - -struct tiocp{ - - /* 0x000000-0x00FFFF -- Local Registers */ - - /* 0x000000-0x000057 -- (Legacy Widget Space) Configuration */ - u64 cp_id; /* 0x000000 */ - u64 cp_stat; /* 0x000008 */ - u64 cp_err_upper; /* 0x000010 */ - u64 cp_err_lower; /* 0x000018 */ - #define cp_err cp_err_lower - u64 cp_control; /* 0x000020 */ - u64 cp_req_timeout; /* 0x000028 */ - u64 cp_intr_upper; /* 0x000030 */ - u64 cp_intr_lower; /* 0x000038 */ - #define cp_intr cp_intr_lower - u64 cp_err_cmdword; /* 0x000040 */ - u64 _pad_000048; /* 0x000048 */ - u64 cp_tflush; /* 0x000050 */ - - /* 0x000058-0x00007F -- Bridge-specific Configuration */ - u64 cp_aux_err; /* 0x000058 */ - u64 cp_resp_upper; /* 0x000060 */ - u64 cp_resp_lower; /* 0x000068 */ - #define cp_resp cp_resp_lower - u64 cp_tst_pin_ctrl; /* 0x000070 */ - u64 cp_addr_lkerr; /* 0x000078 */ - - /* 0x000080-0x00008F -- PMU & MAP */ - u64 cp_dir_map; /* 0x000080 */ - u64 _pad_000088; /* 0x000088 */ - - /* 0x000090-0x00009F -- SSRAM */ - u64 cp_map_fault; /* 0x000090 */ - u64 _pad_000098; /* 0x000098 */ - - /* 0x0000A0-0x0000AF -- Arbitration */ - u64 cp_arb; /* 0x0000A0 */ - u64 _pad_0000A8; /* 0x0000A8 */ - - /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */ - u64 cp_ate_parity_err; /* 0x0000B0 */ - u64 _pad_0000B8; /* 0x0000B8 */ - - /* 0x0000C0-0x0000FF -- PCI/GIO */ - u64 cp_bus_timeout; /* 0x0000C0 */ - u64 cp_pci_cfg; /* 0x0000C8 */ - u64 cp_pci_err_upper; /* 0x0000D0 */ - u64 cp_pci_err_lower; /* 0x0000D8 */ - #define cp_pci_err cp_pci_err_lower - u64 _pad_0000E0[4]; /* 0x0000{E0..F8} */ - - /* 0x000100-0x0001FF -- Interrupt */ - u64 cp_int_status; /* 0x000100 */ - u64 cp_int_enable; /* 0x000108 */ - u64 cp_int_rst_stat; /* 0x000110 */ - u64 cp_int_mode; /* 0x000118 */ - u64 cp_int_device; /* 0x000120 */ - u64 cp_int_host_err; /* 0x000128 */ - u64 cp_int_addr[8]; /* 0x0001{30,,,68} */ - u64 cp_err_int_view; /* 0x000170 */ - u64 cp_mult_int; /* 0x000178 */ - u64 cp_force_always[8]; /* 0x0001{80,,,B8} */ - u64 cp_force_pin[8]; /* 0x0001{C0,,,F8} */ - - /* 0x000200-0x000298 -- Device */ - u64 cp_device[4]; /* 0x0002{00,,,18} */ - u64 _pad_000220[4]; /* 0x0002{20,,,38} */ - u64 cp_wr_req_buf[4]; /* 0x0002{40,,,58} */ - u64 _pad_000260[4]; /* 0x0002{60,,,78} */ - u64 cp_rrb_map[2]; /* 0x0002{80,,,88} */ - #define cp_even_resp cp_rrb_map[0] /* 0x000280 */ - #define cp_odd_resp cp_rrb_map[1] /* 0x000288 */ - u64 cp_resp_status; /* 0x000290 */ - u64 cp_resp_clear; /* 0x000298 */ - - u64 _pad_0002A0[12]; /* 0x0002{A0..F8} */ - - /* 0x000300-0x0003F8 -- Buffer Address Match Registers */ - struct { - u64 upper; /* 0x0003{00,,,F0} */ - u64 lower; /* 0x0003{08,,,F8} */ - } cp_buf_addr_match[16]; - - /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */ - struct { - u64 flush_w_touch; /* 0x000{400,,,5C0} */ - u64 flush_wo_touch; /* 0x000{408,,,5C8} */ - u64 inflight; /* 0x000{410,,,5D0} */ - u64 prefetch; /* 0x000{418,,,5D8} */ - u64 total_pci_retry; /* 0x000{420,,,5E0} */ - u64 max_pci_retry; /* 0x000{428,,,5E8} */ - u64 max_latency; /* 0x000{430,,,5F0} */ - u64 clear_all; /* 0x000{438,,,5F8} */ - } cp_buf_count[8]; - - - /* 0x000600-0x0009FF -- PCI/X registers */ - u64 cp_pcix_bus_err_addr; /* 0x000600 */ - u64 cp_pcix_bus_err_attr; /* 0x000608 */ - u64 cp_pcix_bus_err_data; /* 0x000610 */ - u64 cp_pcix_pio_split_addr; /* 0x000618 */ - u64 cp_pcix_pio_split_attr; /* 0x000620 */ - u64 cp_pcix_dma_req_err_attr; /* 0x000628 */ - u64 cp_pcix_dma_req_err_addr; /* 0x000630 */ - u64 cp_pcix_timeout; /* 0x000638 */ - - u64 _pad_000640[24]; /* 0x000{640,,,6F8} */ - - /* 0x000700-0x000737 -- Debug Registers */ - u64 cp_ct_debug_ctl; /* 0x000700 */ - u64 cp_br_debug_ctl; /* 0x000708 */ - u64 cp_mux3_debug_ctl; /* 0x000710 */ - u64 cp_mux4_debug_ctl; /* 0x000718 */ - u64 cp_mux5_debug_ctl; /* 0x000720 */ - u64 cp_mux6_debug_ctl; /* 0x000728 */ - u64 cp_mux7_debug_ctl; /* 0x000730 */ - - u64 _pad_000738[89]; /* 0x000{738,,,9F8} */ - - /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */ - struct { - u64 cp_buf_addr; /* 0x000{A00,,,AF0} */ - u64 cp_buf_attr; /* 0X000{A08,,,AF8} */ - } cp_pcix_read_buf_64[16]; - - struct { - u64 cp_buf_addr; /* 0x000{B00,,,BE0} */ - u64 cp_buf_attr; /* 0x000{B08,,,BE8} */ - u64 cp_buf_valid; /* 0x000{B10,,,BF0} */ - u64 __pad1; /* 0x000{B18,,,BF8} */ - } cp_pcix_write_buf_64[8]; - - /* End of Local Registers -- Start of Address Map space */ - - char _pad_000c00[0x010000 - 0x000c00]; - - /* 0x010000-0x011FF8 -- Internal ATE RAM (Auto Parity Generation) */ - u64 cp_int_ate_ram[1024]; /* 0x010000-0x011FF8 */ - - char _pad_012000[0x14000 - 0x012000]; - - /* 0x014000-0x015FF8 -- Internal ATE RAM (Manual Parity Generation) */ - u64 cp_int_ate_ram_mp[1024]; /* 0x014000-0x015FF8 */ - - char _pad_016000[0x18000 - 0x016000]; - - /* 0x18000-0x197F8 -- TIOCP Write Request Ram */ - u64 cp_wr_req_lower[256]; /* 0x18000 - 0x187F8 */ - u64 cp_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */ - u64 cp_wr_req_parity[256]; /* 0x19000 - 0x197F8 */ - - char _pad_019800[0x1C000 - 0x019800]; - - /* 0x1C000-0x1EFF8 -- TIOCP Read Response Ram */ - u64 cp_rd_resp_lower[512]; /* 0x1C000 - 0x1CFF8 */ - u64 cp_rd_resp_upper[512]; /* 0x1D000 - 0x1DFF8 */ - u64 cp_rd_resp_parity[512]; /* 0x1E000 - 0x1EFF8 */ - - char _pad_01F000[0x20000 - 0x01F000]; - - /* 0x020000-0x021FFF -- Host Device (CP) Configuration Space (not used) */ - char _pad_020000[0x021000 - 0x20000]; - - /* 0x021000-0x027FFF -- PCI Device Configuration Spaces */ - union { - u8 c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */ - u16 s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */ - u32 l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */ - u64 d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */ - union { - u8 c[0x100 / 1]; - u16 s[0x100 / 2]; - u32 l[0x100 / 4]; - u64 d[0x100 / 8]; - } f[8]; - } cp_type0_cfg_dev[7]; /* 0x02{1000,,,7FFF} */ - - /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */ - union { - u8 c[0x1000 / 1]; /* 0x028000-0x029000 */ - u16 s[0x1000 / 2]; /* 0x028000-0x029000 */ - u32 l[0x1000 / 4]; /* 0x028000-0x029000 */ - u64 d[0x1000 / 8]; /* 0x028000-0x029000 */ - union { - u8 c[0x100 / 1]; - u16 s[0x100 / 2]; - u32 l[0x100 / 4]; - u64 d[0x100 / 8]; - } f[8]; - } cp_type1_cfg; /* 0x028000-0x029000 */ - - char _pad_029000[0x030000-0x029000]; - - /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */ - union { - u8 c[8 / 1]; - u16 s[8 / 2]; - u32 l[8 / 4]; - u64 d[8 / 8]; - } cp_pci_iack; /* 0x030000-0x030007 */ - - char _pad_030007[0x040000-0x030008]; - - /* 0x040000-0x040007 -- PCIX Special Cycle */ - union { - u8 c[8 / 1]; - u16 s[8 / 2]; - u32 l[8 / 4]; - u64 d[8 / 8]; - } cp_pcix_cycle; /* 0x040000-0x040007 */ - - char _pad_040007[0x200000-0x040008]; - - /* 0x200000-0x7FFFFF -- PCI/GIO Device Spaces */ - union { - u8 c[0x100000 / 1]; - u16 s[0x100000 / 2]; - u32 l[0x100000 / 4]; - u64 d[0x100000 / 8]; - } cp_devio_raw[6]; /* 0x200000-0x7FFFFF */ - - #define cp_devio(n) cp_devio_raw[((n)<2)?(n*2):(n+2)] - - char _pad_800000[0xA00000-0x800000]; - - /* 0xA00000-0xBFFFFF -- PCI/GIO Device Spaces w/flush */ - union { - u8 c[0x100000 / 1]; - u16 s[0x100000 / 2]; - u32 l[0x100000 / 4]; - u64 d[0x100000 / 8]; - } cp_devio_raw_flush[6]; /* 0xA00000-0xBFFFFF */ - - #define cp_devio_flush(n) cp_devio_raw_flush[((n)<2)?(n*2):(n+2)] - -}; - -#endif /* _ASM_IA64_SN_PCI_TIOCP_H */ diff --git a/include/asm-ia64/sn/tiocx.h b/include/asm-ia64/sn/tiocx.h deleted file mode 100644 index d29728492f36..000000000000 --- a/include/asm-ia64/sn/tiocx.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_TIO_TIOCX_H -#define _ASM_IA64_SN_TIO_TIOCX_H - -#ifdef __KERNEL__ - -struct cx_id_s { - unsigned int part_num; - unsigned int mfg_num; - int nasid; -}; - -struct cx_dev { - struct cx_id_s cx_id; - int bt; /* board/blade type */ - void *soft; /* driver specific */ - struct hubdev_info *hubdev; - struct device dev; - struct cx_drv *driver; -}; - -struct cx_device_id { - unsigned int part_num; - unsigned int mfg_num; -}; - -struct cx_drv { - char *name; - const struct cx_device_id *id_table; - struct device_driver driver; - int (*probe) (struct cx_dev * dev, const struct cx_device_id * id); - int (*remove) (struct cx_dev * dev); -}; - -/* create DMA address by stripping AS bits */ -#define TIOCX_DMA_ADDR(a) (u64)((u64)(a) & 0xffffcfffffffffUL) - -#define TIOCX_TO_TIOCX_DMA_ADDR(a) (u64)(((u64)(a) & 0xfffffffff) | \ - ((((u64)(a)) & 0xffffc000000000UL) <<2)) - -#define TIO_CE_ASIC_PARTNUM 0xce00 -#define TIOCX_CORELET 3 - -/* These are taken from tio_mmr_as.h */ -#define TIO_ICE_FRZ_CFG TIO_MMR_ADDR_MOD(0x00000000b0008100UL) -#define TIO_ICE_PMI_TX_CFG TIO_MMR_ADDR_MOD(0x00000000b000b100UL) -#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3 TIO_MMR_ADDR_MOD(0x00000000b000be18UL) -#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3_CREDIT_CNT_MASK 0x000000000000000fUL - -#define to_cx_dev(n) container_of(n, struct cx_dev, dev) -#define to_cx_driver(drv) container_of(drv, struct cx_drv, driver) - -extern struct sn_irq_info *tiocx_irq_alloc(nasid_t, int, int, nasid_t, int); -extern void tiocx_irq_free(struct sn_irq_info *); -extern int cx_device_unregister(struct cx_dev *); -extern int cx_device_register(nasid_t, int, int, struct hubdev_info *, int); -extern int cx_driver_unregister(struct cx_drv *); -extern int cx_driver_register(struct cx_drv *); -extern u64 tiocx_dma_addr(u64 addr); -extern u64 tiocx_swin_base(int nasid); -extern void tiocx_mmr_store(int nasid, u64 offset, u64 value); -extern u64 tiocx_mmr_load(int nasid, u64 offset); - -#endif // __KERNEL__ -#endif // _ASM_IA64_SN_TIO_TIOCX__ diff --git a/include/asm-ia64/sn/types.h b/include/asm-ia64/sn/types.h deleted file mode 100644 index 8e04ee211e59..000000000000 --- a/include/asm-ia64/sn/types.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999,2001-2003 Silicon Graphics, Inc. All Rights Reserved. - * Copyright (C) 1999 by Ralf Baechle - */ -#ifndef _ASM_IA64_SN_TYPES_H -#define _ASM_IA64_SN_TYPES_H - -#include - -typedef unsigned long cpuid_t; -typedef signed short nasid_t; /* node id in numa-as-id space */ -typedef signed char partid_t; /* partition ID type */ -typedef unsigned int moduleid_t; /* user-visible module number type */ -typedef unsigned int cmoduleid_t; /* kernel compact module id type */ -typedef unsigned char slotid_t; /* slot (blade) within module */ -typedef unsigned char slabid_t; /* slab (asic) within slot */ -typedef u64 nic_t; -typedef unsigned long iopaddr_t; -typedef unsigned long paddr_t; -typedef short cnodeid_t; - -#endif /* _ASM_IA64_SN_TYPES_H */ diff --git a/include/asm-ia64/socket.h b/include/asm-ia64/socket.h deleted file mode 100644 index d5ef0aa3e312..000000000000 --- a/include/asm-ia64/socket.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef _ASM_IA64_SOCKET_H -#define _ASM_IA64_SOCKET_H - -/* - * Socket related defines. - * - * Based on . - * - * Modified 1998-2000 - * David Mosberger-Tang , Hewlett-Packard Co - */ - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#endif /* _ASM_IA64_SOCKET_H */ diff --git a/include/asm-ia64/sockios.h b/include/asm-ia64/sockios.h deleted file mode 100644 index 15c92468ad38..000000000000 --- a/include/asm-ia64/sockios.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_IA64_SOCKIOS_H -#define _ASM_IA64_SOCKIOS_H - -/* - * Socket-level I/O control calls. - * - * Based on . - * - * Modified 1998, 1999 - * David Mosberger-Tang , Hewlett-Packard Co - */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _ASM_IA64_SOCKIOS_H */ diff --git a/include/asm-ia64/sparsemem.h b/include/asm-ia64/sparsemem.h deleted file mode 100644 index 67a7c40ec27f..000000000000 --- a/include/asm-ia64/sparsemem.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_IA64_SPARSEMEM_H -#define _ASM_IA64_SPARSEMEM_H - -#ifdef CONFIG_SPARSEMEM -/* - * SECTION_SIZE_BITS 2^N: how big each section will be - * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space - */ - -#define SECTION_SIZE_BITS (30) -#define MAX_PHYSMEM_BITS (50) -#ifdef CONFIG_FORCE_MAX_ZONEORDER -#if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS) -#undef SECTION_SIZE_BITS -#define SECTION_SIZE_BITS (CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) -#endif -#endif - -#endif /* CONFIG_SPARSEMEM */ -#endif /* _ASM_IA64_SPARSEMEM_H */ diff --git a/include/asm-ia64/spinlock.h b/include/asm-ia64/spinlock.h deleted file mode 100644 index 0229fb95fb38..000000000000 --- a/include/asm-ia64/spinlock.h +++ /dev/null @@ -1,220 +0,0 @@ -#ifndef _ASM_IA64_SPINLOCK_H -#define _ASM_IA64_SPINLOCK_H - -/* - * Copyright (C) 1998-2003 Hewlett-Packard Co - * David Mosberger-Tang - * Copyright (C) 1999 Walt Drummond - * - * This file is used for SMP configurations only. - */ - -#include -#include -#include - -#include -#include -#include - -#define __raw_spin_lock_init(x) ((x)->lock = 0) - -#ifdef ASM_SUPPORTED -/* - * Try to get the lock. If we fail to get the lock, make a non-standard call to - * ia64_spinlock_contention(). We do not use a normal call because that would force all - * callers of __raw_spin_lock() to be non-leaf routines. Instead, ia64_spinlock_contention() is - * carefully coded to touch only those registers that __raw_spin_lock() marks "clobbered". - */ - -#define IA64_SPINLOCK_CLOBBERS "ar.ccv", "ar.pfs", "p14", "p15", "r27", "r28", "r29", "r30", "b6", "memory" - -static inline void -__raw_spin_lock_flags (raw_spinlock_t *lock, unsigned long flags) -{ - register volatile unsigned int *ptr asm ("r31") = &lock->lock; - -#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3) -# ifdef CONFIG_ITANIUM - /* don't use brl on Itanium... */ - asm volatile ("{\n\t" - " mov ar.ccv = r0\n\t" - " mov r28 = ip\n\t" - " mov r30 = 1;;\n\t" - "}\n\t" - "cmpxchg4.acq r30 = [%1], r30, ar.ccv\n\t" - "movl r29 = ia64_spinlock_contention_pre3_4;;\n\t" - "cmp4.ne p14, p0 = r30, r0\n\t" - "mov b6 = r29;;\n\t" - "mov r27=%2\n\t" - "(p14) br.cond.spnt.many b6" - : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS); -# else - asm volatile ("{\n\t" - " mov ar.ccv = r0\n\t" - " mov r28 = ip\n\t" - " mov r30 = 1;;\n\t" - "}\n\t" - "cmpxchg4.acq r30 = [%1], r30, ar.ccv;;\n\t" - "cmp4.ne p14, p0 = r30, r0\n\t" - "mov r27=%2\n\t" - "(p14) brl.cond.spnt.many ia64_spinlock_contention_pre3_4;;" - : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS); -# endif /* CONFIG_MCKINLEY */ -#else -# ifdef CONFIG_ITANIUM - /* don't use brl on Itanium... */ - /* mis-declare, so we get the entry-point, not it's function descriptor: */ - asm volatile ("mov r30 = 1\n\t" - "mov r27=%2\n\t" - "mov ar.ccv = r0;;\n\t" - "cmpxchg4.acq r30 = [%0], r30, ar.ccv\n\t" - "movl r29 = ia64_spinlock_contention;;\n\t" - "cmp4.ne p14, p0 = r30, r0\n\t" - "mov b6 = r29;;\n\t" - "(p14) br.call.spnt.many b6 = b6" - : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS); -# else - asm volatile ("mov r30 = 1\n\t" - "mov r27=%2\n\t" - "mov ar.ccv = r0;;\n\t" - "cmpxchg4.acq r30 = [%0], r30, ar.ccv;;\n\t" - "cmp4.ne p14, p0 = r30, r0\n\t" - "(p14) brl.call.spnt.many b6=ia64_spinlock_contention;;" - : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS); -# endif /* CONFIG_MCKINLEY */ -#endif -} - -#define __raw_spin_lock(lock) __raw_spin_lock_flags(lock, 0) - -/* Unlock by doing an ordered store and releasing the cacheline with nta */ -static inline void __raw_spin_unlock(raw_spinlock_t *x) { - barrier(); - asm volatile ("st4.rel.nta [%0] = r0\n\t" :: "r"(x)); -} - -#else /* !ASM_SUPPORTED */ -#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) -# define __raw_spin_lock(x) \ -do { \ - __u32 *ia64_spinlock_ptr = (__u32 *) (x); \ - __u64 ia64_spinlock_val; \ - ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0); \ - if (unlikely(ia64_spinlock_val)) { \ - do { \ - while (*ia64_spinlock_ptr) \ - ia64_barrier(); \ - ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0); \ - } while (ia64_spinlock_val); \ - } \ -} while (0) -#define __raw_spin_unlock(x) do { barrier(); ((raw_spinlock_t *) x)->lock = 0; } while (0) -#endif /* !ASM_SUPPORTED */ - -#define __raw_spin_is_locked(x) ((x)->lock != 0) -#define __raw_spin_trylock(x) (cmpxchg_acq(&(x)->lock, 0, 1) == 0) -#define __raw_spin_unlock_wait(lock) \ - do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) - -#define __raw_read_can_lock(rw) (*(volatile int *)(rw) >= 0) -#define __raw_write_can_lock(rw) (*(volatile int *)(rw) == 0) - -#define __raw_read_lock(rw) \ -do { \ - raw_rwlock_t *__read_lock_ptr = (rw); \ - \ - while (unlikely(ia64_fetchadd(1, (int *) __read_lock_ptr, acq) < 0)) { \ - ia64_fetchadd(-1, (int *) __read_lock_ptr, rel); \ - while (*(volatile int *)__read_lock_ptr < 0) \ - cpu_relax(); \ - } \ -} while (0) - -#define __raw_read_unlock(rw) \ -do { \ - raw_rwlock_t *__read_lock_ptr = (rw); \ - ia64_fetchadd(-1, (int *) __read_lock_ptr, rel); \ -} while (0) - -#ifdef ASM_SUPPORTED -#define __raw_write_lock(rw) \ -do { \ - __asm__ __volatile__ ( \ - "mov ar.ccv = r0\n" \ - "dep r29 = -1, r0, 31, 1;;\n" \ - "1:\n" \ - "ld4 r2 = [%0];;\n" \ - "cmp4.eq p0,p7 = r0,r2\n" \ - "(p7) br.cond.spnt.few 1b \n" \ - "cmpxchg4.acq r2 = [%0], r29, ar.ccv;;\n" \ - "cmp4.eq p0,p7 = r0, r2\n" \ - "(p7) br.cond.spnt.few 1b;;\n" \ - :: "r"(rw) : "ar.ccv", "p7", "r2", "r29", "memory"); \ -} while(0) - -#define __raw_write_trylock(rw) \ -({ \ - register long result; \ - \ - __asm__ __volatile__ ( \ - "mov ar.ccv = r0\n" \ - "dep r29 = -1, r0, 31, 1;;\n" \ - "cmpxchg4.acq %0 = [%1], r29, ar.ccv\n" \ - : "=r"(result) : "r"(rw) : "ar.ccv", "r29", "memory"); \ - (result == 0); \ -}) - -static inline void __raw_write_unlock(raw_rwlock_t *x) -{ - u8 *y = (u8 *)x; - barrier(); - asm volatile ("st1.rel.nta [%0] = r0\n\t" :: "r"(y+3) : "memory" ); -} - -#else /* !ASM_SUPPORTED */ - -#define __raw_write_lock(l) \ -({ \ - __u64 ia64_val, ia64_set_val = ia64_dep_mi(-1, 0, 31, 1); \ - __u32 *ia64_write_lock_ptr = (__u32 *) (l); \ - do { \ - while (*ia64_write_lock_ptr) \ - ia64_barrier(); \ - ia64_val = ia64_cmpxchg4_acq(ia64_write_lock_ptr, ia64_set_val, 0); \ - } while (ia64_val); \ -}) - -#define __raw_write_trylock(rw) \ -({ \ - __u64 ia64_val; \ - __u64 ia64_set_val = ia64_dep_mi(-1, 0, 31,1); \ - ia64_val = ia64_cmpxchg4_acq((__u32 *)(rw), ia64_set_val, 0); \ - (ia64_val == 0); \ -}) - -static inline void __raw_write_unlock(raw_rwlock_t *x) -{ - barrier(); - x->write_lock = 0; -} - -#endif /* !ASM_SUPPORTED */ - -static inline int __raw_read_trylock(raw_rwlock_t *x) -{ - union { - raw_rwlock_t lock; - __u32 word; - } old, new; - old.lock = new.lock = *x; - old.lock.write_lock = new.lock.write_lock = 0; - ++new.lock.read_counter; - return (u32)ia64_cmpxchg4_acq((__u32 *)(x), new.word, old.word) == old.word; -} - -#define _raw_spin_relax(lock) cpu_relax() -#define _raw_read_relax(lock) cpu_relax() -#define _raw_write_relax(lock) cpu_relax() - -#endif /* _ASM_IA64_SPINLOCK_H */ diff --git a/include/asm-ia64/spinlock_types.h b/include/asm-ia64/spinlock_types.h deleted file mode 100644 index 474e46f1ab4a..000000000000 --- a/include/asm-ia64/spinlock_types.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _ASM_IA64_SPINLOCK_TYPES_H -#define _ASM_IA64_SPINLOCK_TYPES_H - -#ifndef __LINUX_SPINLOCK_TYPES_H -# error "please don't include this file directly" -#endif - -typedef struct { - volatile unsigned int lock; -} raw_spinlock_t; - -#define __RAW_SPIN_LOCK_UNLOCKED { 0 } - -typedef struct { - volatile unsigned int read_counter : 31; - volatile unsigned int write_lock : 1; -} raw_rwlock_t; - -#define __RAW_RW_LOCK_UNLOCKED { 0, 0 } - -#endif diff --git a/include/asm-ia64/stat.h b/include/asm-ia64/stat.h deleted file mode 100644 index 367bb90cdffa..000000000000 --- a/include/asm-ia64/stat.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef _ASM_IA64_STAT_H -#define _ASM_IA64_STAT_H - -/* - * Modified 1998, 1999 - * David Mosberger-Tang , Hewlett-Packard Co - */ - -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned long st_nlink; - unsigned int st_mode; - unsigned int st_uid; - unsigned int st_gid; - unsigned int __pad0; - unsigned long st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long st_blksize; - long st_blocks; - unsigned long __unused[3]; -}; - -#define STAT_HAVE_NSEC 1 - -struct ia64_oldstat { - unsigned int st_dev; - unsigned int st_ino; - unsigned int st_mode; - unsigned int st_nlink; - unsigned int st_uid; - unsigned int st_gid; - unsigned int st_rdev; - unsigned int __pad1; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; - unsigned int st_blksize; - int st_blocks; - unsigned int __unused1; - unsigned int __unused2; -}; - -#endif /* _ASM_IA64_STAT_H */ diff --git a/include/asm-ia64/statfs.h b/include/asm-ia64/statfs.h deleted file mode 100644 index 811097974f31..000000000000 --- a/include/asm-ia64/statfs.h +++ /dev/null @@ -1,62 +0,0 @@ -#ifndef _ASM_IA64_STATFS_H -#define _ASM_IA64_STATFS_H - -/* - * Based on . - * - * Modified 1998, 1999, 2003 - * David Mosberger-Tang , Hewlett-Packard Co - */ - -#ifndef __KERNEL_STRICT_NAMES -# include -typedef __kernel_fsid_t fsid_t; -#endif - -/* - * This is ugly --- we're already 64-bit, so just duplicate the definitions - */ -struct statfs { - long f_type; - long f_bsize; - long f_blocks; - long f_bfree; - long f_bavail; - long f_files; - long f_ffree; - __kernel_fsid_t f_fsid; - long f_namelen; - long f_frsize; - long f_spare[5]; -}; - - -struct statfs64 { - long f_type; - long f_bsize; - long f_blocks; - long f_bfree; - long f_bavail; - long f_files; - long f_ffree; - __kernel_fsid_t f_fsid; - long f_namelen; - long f_frsize; - long f_spare[5]; -}; - -struct compat_statfs64 { - __u32 f_type; - __u32 f_bsize; - __u64 f_blocks; - __u64 f_bfree; - __u64 f_bavail; - __u64 f_files; - __u64 f_ffree; - __kernel_fsid_t f_fsid; - __u32 f_namelen; - __u32 f_frsize; - __u32 f_spare[5]; -} __attribute__((packed)); - -#endif /* _ASM_IA64_STATFS_H */ diff --git a/include/asm-ia64/string.h b/include/asm-ia64/string.h deleted file mode 100644 index 85fd65c52a8c..000000000000 --- a/include/asm-ia64/string.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _ASM_IA64_STRING_H -#define _ASM_IA64_STRING_H - -/* - * Here is where we want to put optimized versions of the string - * routines. - * - * Copyright (C) 1998-2000, 2002 Hewlett-Packard Co - * David Mosberger-Tang - */ - - -#define __HAVE_ARCH_STRLEN 1 /* see arch/ia64/lib/strlen.S */ -#define __HAVE_ARCH_MEMSET 1 /* see arch/ia64/lib/memset.S */ -#define __HAVE_ARCH_MEMCPY 1 /* see arch/ia64/lib/memcpy.S */ - -extern __kernel_size_t strlen (const char *); -extern void *memcpy (void *, const void *, __kernel_size_t); -extern void *memset (void *, int, __kernel_size_t); - -#endif /* _ASM_IA64_STRING_H */ diff --git a/include/asm-ia64/suspend.h b/include/asm-ia64/suspend.h deleted file mode 100644 index b05bbb6074e2..000000000000 --- a/include/asm-ia64/suspend.h +++ /dev/null @@ -1 +0,0 @@ -/* dummy (must be non-empty to prevent prejudicial removal...) */ diff --git a/include/asm-ia64/system.h b/include/asm-ia64/system.h deleted file mode 100644 index 927a381c20ca..000000000000 --- a/include/asm-ia64/system.h +++ /dev/null @@ -1,292 +0,0 @@ -#ifndef _ASM_IA64_SYSTEM_H -#define _ASM_IA64_SYSTEM_H - -/* - * System defines. Note that this is included both from .c and .S - * files, so it does only defines, not any C code. This is based - * on information published in the Processor Abstraction Layer - * and the System Abstraction Layer manual. - * - * Copyright (C) 1998-2003 Hewlett-Packard Co - * David Mosberger-Tang - * Copyright (C) 1999 Asit Mallick - * Copyright (C) 1999 Don Dugger - */ - -#include -#include -#include -#include - -#define GATE_ADDR RGN_BASE(RGN_GATE) - -/* - * 0xa000000000000000+2*PERCPU_PAGE_SIZE - * - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page) - */ -#define KERNEL_START (GATE_ADDR+__IA64_UL_CONST(0x100000000)) -#define PERCPU_ADDR (-PERCPU_PAGE_SIZE) -#define LOAD_OFFSET (KERNEL_START - KERNEL_TR_PAGE_SIZE) - -#ifndef __ASSEMBLY__ - -#include -#include - -#define AT_VECTOR_SIZE_ARCH 2 /* entries in ARCH_DLINFO */ - -struct pci_vector_struct { - __u16 segment; /* PCI Segment number */ - __u16 bus; /* PCI Bus number */ - __u32 pci_id; /* ACPI split 16 bits device, 16 bits function (see section 6.1.1) */ - __u8 pin; /* PCI PIN (0 = A, 1 = B, 2 = C, 3 = D) */ - __u32 irq; /* IRQ assigned */ -}; - -extern struct ia64_boot_param { - __u64 command_line; /* physical address of command line arguments */ - __u64 efi_systab; /* physical address of EFI system table */ - __u64 efi_memmap; /* physical address of EFI memory map */ - __u64 efi_memmap_size; /* size of EFI memory map */ - __u64 efi_memdesc_size; /* size of an EFI memory map descriptor */ - __u32 efi_memdesc_version; /* memory descriptor version */ - struct { - __u16 num_cols; /* number of columns on console output device */ - __u16 num_rows; /* number of rows on console output device */ - __u16 orig_x; /* cursor's x position */ - __u16 orig_y; /* cursor's y position */ - } console_info; - __u64 fpswa; /* physical address of the fpswa interface */ - __u64 initrd_start; - __u64 initrd_size; -} *ia64_boot_param; - -/* - * Macros to force memory ordering. In these descriptions, "previous" - * and "subsequent" refer to program order; "visible" means that all - * architecturally visible effects of a memory access have occurred - * (at a minimum, this means the memory has been read or written). - * - * wmb(): Guarantees that all preceding stores to memory- - * like regions are visible before any subsequent - * stores and that all following stores will be - * visible only after all previous stores. - * rmb(): Like wmb(), but for reads. - * mb(): wmb()/rmb() combo, i.e., all previous memory - * accesses are visible before all subsequent - * accesses and vice versa. This is also known as - * a "fence." - * - * Note: "mb()" and its variants cannot be used as a fence to order - * accesses to memory mapped I/O registers. For that, mf.a needs to - * be used. However, we don't want to always use mf.a because (a) - * it's (presumably) much slower than mf and (b) mf.a is supported for - * sequential memory pages only. - */ -#define mb() ia64_mf() -#define rmb() mb() -#define wmb() mb() -#define read_barrier_depends() do { } while(0) - -#ifdef CONFIG_SMP -# define smp_mb() mb() -# define smp_rmb() rmb() -# define smp_wmb() wmb() -# define smp_read_barrier_depends() read_barrier_depends() -#else -# define smp_mb() barrier() -# define smp_rmb() barrier() -# define smp_wmb() barrier() -# define smp_read_barrier_depends() do { } while(0) -#endif - -/* - * XXX check on this ---I suspect what Linus really wants here is - * acquire vs release semantics but we can't discuss this stuff with - * Linus just yet. Grrr... - */ -#define set_mb(var, value) do { (var) = (value); mb(); } while (0) - -#define safe_halt() ia64_pal_halt_light() /* PAL_HALT_LIGHT */ - -/* - * The group barrier in front of the rsm & ssm are necessary to ensure - * that none of the previous instructions in the same group are - * affected by the rsm/ssm. - */ -/* For spinlocks etc */ - -/* - * - clearing psr.i is implicitly serialized (visible by next insn) - * - setting psr.i requires data serialization - * - we need a stop-bit before reading PSR because we sometimes - * write a floating-point register right before reading the PSR - * and that writes to PSR.mfl - */ -#ifdef CONFIG_PARAVIRT -#define __local_save_flags() ia64_get_psr_i() -#else -#define __local_save_flags() ia64_getreg(_IA64_REG_PSR) -#endif - -#define __local_irq_save(x) \ -do { \ - ia64_stop(); \ - (x) = __local_save_flags(); \ - ia64_stop(); \ - ia64_rsm(IA64_PSR_I); \ -} while (0) - -#define __local_irq_disable() \ -do { \ - ia64_stop(); \ - ia64_rsm(IA64_PSR_I); \ -} while (0) - -#define __local_irq_restore(x) ia64_intrin_local_irq_restore((x) & IA64_PSR_I) - -#ifdef CONFIG_IA64_DEBUG_IRQ - - extern unsigned long last_cli_ip; - -# define __save_ip() last_cli_ip = ia64_getreg(_IA64_REG_IP) - -# define local_irq_save(x) \ -do { \ - unsigned long __psr; \ - \ - __local_irq_save(__psr); \ - if (__psr & IA64_PSR_I) \ - __save_ip(); \ - (x) = __psr; \ -} while (0) - -# define local_irq_disable() do { unsigned long __x; local_irq_save(__x); } while (0) - -# define local_irq_restore(x) \ -do { \ - unsigned long __old_psr, __psr = (x); \ - \ - local_save_flags(__old_psr); \ - __local_irq_restore(__psr); \ - if ((__old_psr & IA64_PSR_I) && !(__psr & IA64_PSR_I)) \ - __save_ip(); \ -} while (0) - -#else /* !CONFIG_IA64_DEBUG_IRQ */ -# define local_irq_save(x) __local_irq_save(x) -# define local_irq_disable() __local_irq_disable() -# define local_irq_restore(x) __local_irq_restore(x) -#endif /* !CONFIG_IA64_DEBUG_IRQ */ - -#define local_irq_enable() ({ ia64_stop(); ia64_ssm(IA64_PSR_I); ia64_srlz_d(); }) -#define local_save_flags(flags) ({ ia64_stop(); (flags) = __local_save_flags(); }) - -#define irqs_disabled() \ -({ \ - unsigned long __ia64_id_flags; \ - local_save_flags(__ia64_id_flags); \ - (__ia64_id_flags & IA64_PSR_I) == 0; \ -}) - -#ifdef __KERNEL__ - -#ifdef CONFIG_IA32_SUPPORT -# define IS_IA32_PROCESS(regs) (ia64_psr(regs)->is != 0) -#else -# define IS_IA32_PROCESS(regs) 0 -struct task_struct; -static inline void ia32_save_state(struct task_struct *t __attribute__((unused))){} -static inline void ia32_load_state(struct task_struct *t __attribute__((unused))){} -#endif - -/* - * Context switch from one thread to another. If the two threads have - * different address spaces, schedule() has already taken care of - * switching to the new address space by calling switch_mm(). - * - * Disabling access to the fph partition and the debug-register - * context switch MUST be done before calling ia64_switch_to() since a - * newly created thread returns directly to - * ia64_ret_from_syscall_clear_r8. - */ -extern struct task_struct *ia64_switch_to (void *next_task); - -struct task_struct; - -extern void ia64_save_extra (struct task_struct *task); -extern void ia64_load_extra (struct task_struct *task); - -#ifdef CONFIG_VIRT_CPU_ACCOUNTING -extern void ia64_account_on_switch (struct task_struct *prev, struct task_struct *next); -# define IA64_ACCOUNT_ON_SWITCH(p,n) ia64_account_on_switch(p,n) -#else -# define IA64_ACCOUNT_ON_SWITCH(p,n) -#endif - -#ifdef CONFIG_PERFMON - DECLARE_PER_CPU(unsigned long, pfm_syst_info); -# define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1) -#else -# define PERFMON_IS_SYSWIDE() (0) -#endif - -#define IA64_HAS_EXTRA_STATE(t) \ - ((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID) \ - || IS_IA32_PROCESS(task_pt_regs(t)) || PERFMON_IS_SYSWIDE()) - -#define __switch_to(prev,next,last) do { \ - IA64_ACCOUNT_ON_SWITCH(prev, next); \ - if (IA64_HAS_EXTRA_STATE(prev)) \ - ia64_save_extra(prev); \ - if (IA64_HAS_EXTRA_STATE(next)) \ - ia64_load_extra(next); \ - ia64_psr(task_pt_regs(next))->dfh = !ia64_is_local_fpu_owner(next); \ - (last) = ia64_switch_to((next)); \ -} while (0) - -#ifdef CONFIG_SMP -/* - * In the SMP case, we save the fph state when context-switching away from a thread that - * modified fph. This way, when the thread gets scheduled on another CPU, the CPU can - * pick up the state from task->thread.fph, avoiding the complication of having to fetch - * the latest fph state from another CPU. In other words: eager save, lazy restore. - */ -# define switch_to(prev,next,last) do { \ - if (ia64_psr(task_pt_regs(prev))->mfh && ia64_is_local_fpu_owner(prev)) { \ - ia64_psr(task_pt_regs(prev))->mfh = 0; \ - (prev)->thread.flags |= IA64_THREAD_FPH_VALID; \ - __ia64_save_fpu((prev)->thread.fph); \ - } \ - __switch_to(prev, next, last); \ - /* "next" in old context is "current" in new context */ \ - if (unlikely((current->thread.flags & IA64_THREAD_MIGRATION) && \ - (task_cpu(current) != \ - task_thread_info(current)->last_cpu))) { \ - platform_migrate(current); \ - task_thread_info(current)->last_cpu = task_cpu(current); \ - } \ -} while (0) -#else -# define switch_to(prev,next,last) __switch_to(prev, next, last) -#endif - -#define __ARCH_WANT_UNLOCKED_CTXSW -#define ARCH_HAS_PREFETCH_SWITCH_STACK -#define ia64_platform_is(x) (strcmp(x, platform_name) == 0) - -void cpu_idle_wait(void); - -#define arch_align_stack(x) (x) - -void default_idle(void); - -#ifdef CONFIG_VIRT_CPU_ACCOUNTING -extern void account_system_vtime(struct task_struct *); -#endif - -#endif /* __KERNEL__ */ - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_IA64_SYSTEM_H */ diff --git a/include/asm-ia64/termbits.h b/include/asm-ia64/termbits.h deleted file mode 100644 index 9f162e0089ad..000000000000 --- a/include/asm-ia64/termbits.h +++ /dev/null @@ -1,207 +0,0 @@ -#ifndef _ASM_IA64_TERMBITS_H -#define _ASM_IA64_TERMBITS_H - -/* - * Based on . - * - * Modified 1999 - * David Mosberger-Tang , Hewlett-Packard Co - * - * 99/01/28 Added new baudrates - */ - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _ASM_IA64_TERMBITS_H */ diff --git a/include/asm-ia64/termios.h b/include/asm-ia64/termios.h deleted file mode 100644 index 689d218c0c28..000000000000 --- a/include/asm-ia64/termios.h +++ /dev/null @@ -1,97 +0,0 @@ -#ifndef _ASM_IA64_TERMIOS_H -#define _ASM_IA64_TERMIOS_H - -/* - * Modified 1999 - * David Mosberger-Tang , Hewlett-Packard Co - * - * 99/01/28 Added N_IRDA and N_SMSBLOCK - */ - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -# ifdef __KERNEL__ - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -# endif /* __KERNEL__ */ - -#endif /* _ASM_IA64_TERMIOS_H */ diff --git a/include/asm-ia64/thread_info.h b/include/asm-ia64/thread_info.h deleted file mode 100644 index 7c60fcdd2efd..000000000000 --- a/include/asm-ia64/thread_info.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * Copyright (C) 2002-2003 Hewlett-Packard Co - * David Mosberger-Tang - */ -#ifndef _ASM_IA64_THREAD_INFO_H -#define _ASM_IA64_THREAD_INFO_H - -#ifndef ASM_OFFSETS_C -#include -#endif -#include -#include - -#define PREEMPT_ACTIVE_BIT 30 -#define PREEMPT_ACTIVE (1 << PREEMPT_ACTIVE_BIT) - -#ifndef __ASSEMBLY__ - -/* - * On IA-64, we want to keep the task structure and kernel stack together, so they can be - * mapped by a single TLB entry and so they can be addressed by the "current" pointer - * without having to do pointer masking. - */ -struct thread_info { - struct task_struct *task; /* XXX not really needed, except for dup_task_struct() */ - struct exec_domain *exec_domain;/* execution domain */ - __u32 flags; /* thread_info flags (see TIF_*) */ - __u32 cpu; /* current CPU */ - __u32 last_cpu; /* Last CPU thread ran on */ - __u32 status; /* Thread synchronous flags */ - mm_segment_t addr_limit; /* user-level address space limit */ - int preempt_count; /* 0=premptable, <0=BUG; will also serve as bh-counter */ - struct restart_block restart_block; -#ifdef CONFIG_VIRT_CPU_ACCOUNTING - __u64 ac_stamp; - __u64 ac_leave; - __u64 ac_stime; - __u64 ac_utime; -#endif -}; - -#define THREAD_SIZE KERNEL_STACK_SIZE - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .addr_limit = KERNEL_DS, \ - .preempt_count = 0, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR - -#ifndef ASM_OFFSETS_C -/* how to get the thread information struct from C */ -#define current_thread_info() ((struct thread_info *) ((char *) current + IA64_TASK_SIZE)) -#define alloc_thread_info(tsk) ((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE)) -#define task_thread_info(tsk) ((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE)) -#else -#define current_thread_info() ((struct thread_info *) 0) -#define alloc_thread_info(tsk) ((struct thread_info *) 0) -#define task_thread_info(tsk) ((struct thread_info *) 0) -#endif -#define free_thread_info(ti) /* nothing */ -#define task_stack_page(tsk) ((void *)(tsk)) - -#define __HAVE_THREAD_FUNCTIONS -#ifdef CONFIG_VIRT_CPU_ACCOUNTING -#define setup_thread_stack(p, org) \ - *task_thread_info(p) = *task_thread_info(org); \ - task_thread_info(p)->ac_stime = 0; \ - task_thread_info(p)->ac_utime = 0; \ - task_thread_info(p)->task = (p); -#else -#define setup_thread_stack(p, org) \ - *task_thread_info(p) = *task_thread_info(org); \ - task_thread_info(p)->task = (p); -#endif -#define end_of_stack(p) (unsigned long *)((void *)(p) + IA64_RBS_OFFSET) - -#define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR -#define alloc_task_struct() ((struct task_struct *)__get_free_pages(GFP_KERNEL | __GFP_COMP, KERNEL_STACK_SIZE_ORDER)) -#define free_task_struct(tsk) free_pages((unsigned long) (tsk), KERNEL_STACK_SIZE_ORDER) - -#define tsk_set_notify_resume(tsk) \ - set_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME) -extern void tsk_clear_notify_resume(struct task_struct *tsk); -#endif /* !__ASSEMBLY */ - -/* - * thread information flags - * - these are process state flags that various assembly files may need to access - * - pending work-to-be-done flags are in least-significant 16 bits, other flags - * in top 16 bits - */ -#define TIF_SIGPENDING 0 /* signal pending */ -#define TIF_NEED_RESCHED 1 /* rescheduling necessary */ -#define TIF_SYSCALL_TRACE 2 /* syscall trace active */ -#define TIF_SYSCALL_AUDIT 3 /* syscall auditing active */ -#define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */ -#define TIF_NOTIFY_RESUME 6 /* resumption notification requested */ -#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 17 -#define TIF_MCA_INIT 18 /* this task is processing MCA or INIT */ -#define TIF_DB_DISABLED 19 /* debug trap disabled for fsyscall */ -#define TIF_FREEZE 20 /* is freezing for suspend */ -#define TIF_RESTORE_RSE 21 /* user RBS is newer than kernel RBS */ - -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) -#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) -#define _TIF_SYSCALL_TRACEAUDIT (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP) -#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) -#define _TIF_MCA_INIT (1 << TIF_MCA_INIT) -#define _TIF_DB_DISABLED (1 << TIF_DB_DISABLED) -#define _TIF_FREEZE (1 << TIF_FREEZE) -#define _TIF_RESTORE_RSE (1 << TIF_RESTORE_RSE) - -/* "work to do on user-return" bits */ -#define TIF_ALLWORK_MASK (_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SYSCALL_AUDIT|\ - _TIF_NEED_RESCHED|_TIF_SYSCALL_TRACE) -/* like TIF_ALLWORK_BITS but sans TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT */ -#define TIF_WORK_MASK (TIF_ALLWORK_MASK&~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)) - -#define TS_POLLING 1 /* true if in idle loop and not sleeping */ -#define TS_RESTORE_SIGMASK 2 /* restore signal mask in do_signal() */ - -#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) - -#ifndef __ASSEMBLY__ -#define HAVE_SET_RESTORE_SIGMASK 1 -static inline void set_restore_sigmask(void) -{ - struct thread_info *ti = current_thread_info(); - ti->status |= TS_RESTORE_SIGMASK; - set_bit(TIF_SIGPENDING, &ti->flags); -} -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_IA64_THREAD_INFO_H */ diff --git a/include/asm-ia64/timex.h b/include/asm-ia64/timex.h deleted file mode 100644 index 05a6baf8a472..000000000000 --- a/include/asm-ia64/timex.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASM_IA64_TIMEX_H -#define _ASM_IA64_TIMEX_H - -/* - * Copyright (C) 1998-2001, 2003 Hewlett-Packard Co - * David Mosberger-Tang - */ -/* - * 2001/01/18 davidm Removed CLOCK_TICK_RATE. It makes no sense on IA-64. - * Also removed cacheflush_time as it's entirely unused. - */ - -#include -#include - -typedef unsigned long cycles_t; - -extern void (*ia64_udelay)(unsigned long usecs); - -/* - * For performance reasons, we don't want to define CLOCK_TICK_TRATE as - * local_cpu_data->itc_rate. Fortunately, we don't have to, either: according to George - * Anzinger, 1/CLOCK_TICK_RATE is taken as the resolution of the timer clock. The time - * calculation assumes that you will use enough of these so that your tick size <= 1/HZ. - * If the calculation shows that your CLOCK_TICK_RATE can not supply exactly 1/HZ ticks, - * the actual value is calculated and used to update the wall clock each jiffie. Setting - * the CLOCK_TICK_RATE to x*HZ insures that the calculation will find no errors. Hence we - * pick a multiple of HZ which gives us a (totally virtual) CLOCK_TICK_RATE of about - * 100MHz. - */ -#define CLOCK_TICK_RATE (HZ * 100000UL) - -static inline cycles_t -get_cycles (void) -{ - cycles_t ret; - - ret = ia64_getreg(_IA64_REG_AR_ITC); - return ret; -} - -#endif /* _ASM_IA64_TIMEX_H */ diff --git a/include/asm-ia64/tlb.h b/include/asm-ia64/tlb.h deleted file mode 100644 index 20d8a39680c2..000000000000 --- a/include/asm-ia64/tlb.h +++ /dev/null @@ -1,257 +0,0 @@ -#ifndef _ASM_IA64_TLB_H -#define _ASM_IA64_TLB_H -/* - * Based on . - * - * Copyright (C) 2002-2003 Hewlett-Packard Co - * David Mosberger-Tang - */ -/* - * Removing a translation from a page table (including TLB-shootdown) is a four-step - * procedure: - * - * (1) Flush (virtual) caches --- ensures virtual memory is coherent with kernel memory - * (this is a no-op on ia64). - * (2) Clear the relevant portions of the page-table - * (3) Flush the TLBs --- ensures that stale content is gone from CPU TLBs - * (4) Release the pages that were freed up in step (2). - * - * Note that the ordering of these steps is crucial to avoid races on MP machines. - * - * The Linux kernel defines several platform-specific hooks for TLB-shootdown. When - * unmapping a portion of the virtual address space, these hooks are called according to - * the following template: - * - * tlb <- tlb_gather_mmu(mm, full_mm_flush); // start unmap for address space MM - * { - * for each vma that needs a shootdown do { - * tlb_start_vma(tlb, vma); - * for each page-table-entry PTE that needs to be removed do { - * tlb_remove_tlb_entry(tlb, pte, address); - * if (pte refers to a normal page) { - * tlb_remove_page(tlb, page); - * } - * } - * tlb_end_vma(tlb, vma); - * } - * } - * tlb_finish_mmu(tlb, start, end); // finish unmap for address space MM - */ -#include -#include -#include - -#include -#include -#include -#include - -#ifdef CONFIG_SMP -# define FREE_PTE_NR 2048 -# define tlb_fast_mode(tlb) ((tlb)->nr == ~0U) -#else -# define FREE_PTE_NR 0 -# define tlb_fast_mode(tlb) (1) -#endif - -struct mmu_gather { - struct mm_struct *mm; - unsigned int nr; /* == ~0U => fast mode */ - unsigned char fullmm; /* non-zero means full mm flush */ - unsigned char need_flush; /* really unmapped some PTEs? */ - unsigned long start_addr; - unsigned long end_addr; - struct page *pages[FREE_PTE_NR]; -}; - -struct ia64_tr_entry { - u64 ifa; - u64 itir; - u64 pte; - u64 rr; -}; /*Record for tr entry!*/ - -extern int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size); -extern void ia64_ptr_entry(u64 target_mask, int slot); - -extern struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX]; - -/* - region register macros -*/ -#define RR_TO_VE(val) (((val) >> 0) & 0x0000000000000001) -#define RR_VE(val) (((val) & 0x0000000000000001) << 0) -#define RR_VE_MASK 0x0000000000000001L -#define RR_VE_SHIFT 0 -#define RR_TO_PS(val) (((val) >> 2) & 0x000000000000003f) -#define RR_PS(val) (((val) & 0x000000000000003f) << 2) -#define RR_PS_MASK 0x00000000000000fcL -#define RR_PS_SHIFT 2 -#define RR_RID_MASK 0x00000000ffffff00L -#define RR_TO_RID(val) ((val >> 8) & 0xffffff) - -/* Users of the generic TLB shootdown code must declare this storage space. */ -DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); - -/* - * Flush the TLB for address range START to END and, if not in fast mode, release the - * freed pages that where gathered up to this point. - */ -static inline void -ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end) -{ - unsigned int nr; - - if (!tlb->need_flush) - return; - tlb->need_flush = 0; - - if (tlb->fullmm) { - /* - * Tearing down the entire address space. This happens both as a result - * of exit() and execve(). The latter case necessitates the call to - * flush_tlb_mm() here. - */ - flush_tlb_mm(tlb->mm); - } else if (unlikely (end - start >= 1024*1024*1024*1024UL - || REGION_NUMBER(start) != REGION_NUMBER(end - 1))) - { - /* - * If we flush more than a tera-byte or across regions, we're probably - * better off just flushing the entire TLB(s). This should be very rare - * and is not worth optimizing for. - */ - flush_tlb_all(); - } else { - /* - * XXX fix me: flush_tlb_range() should take an mm pointer instead of a - * vma pointer. - */ - struct vm_area_struct vma; - - vma.vm_mm = tlb->mm; - /* flush the address range from the tlb: */ - flush_tlb_range(&vma, start, end); - /* now flush the virt. page-table area mapping the address range: */ - flush_tlb_range(&vma, ia64_thash(start), ia64_thash(end)); - } - - /* lastly, release the freed pages */ - nr = tlb->nr; - if (!tlb_fast_mode(tlb)) { - unsigned long i; - tlb->nr = 0; - tlb->start_addr = ~0UL; - for (i = 0; i < nr; ++i) - free_page_and_swap_cache(tlb->pages[i]); - } -} - -/* - * Return a pointer to an initialized struct mmu_gather. - */ -static inline struct mmu_gather * -tlb_gather_mmu (struct mm_struct *mm, unsigned int full_mm_flush) -{ - struct mmu_gather *tlb = &get_cpu_var(mmu_gathers); - - tlb->mm = mm; - /* - * Use fast mode if only 1 CPU is online. - * - * It would be tempting to turn on fast-mode for full_mm_flush as well. But this - * doesn't work because of speculative accesses and software prefetching: the page - * table of "mm" may (and usually is) the currently active page table and even - * though the kernel won't do any user-space accesses during the TLB shoot down, a - * compiler might use speculation or lfetch.fault on what happens to be a valid - * user-space address. This in turn could trigger a TLB miss fault (or a VHPT - * walk) and re-insert a TLB entry we just removed. Slow mode avoids such - * problems. (We could make fast-mode work by switching the current task to a - * different "mm" during the shootdown.) --davidm 08/02/2002 - */ - tlb->nr = (num_online_cpus() == 1) ? ~0U : 0; - tlb->fullmm = full_mm_flush; - tlb->start_addr = ~0UL; - return tlb; -} - -/* - * Called at the end of the shootdown operation to free up any resources that were - * collected. - */ -static inline void -tlb_finish_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end) -{ - /* - * Note: tlb->nr may be 0 at this point, so we can't rely on tlb->start_addr and - * tlb->end_addr. - */ - ia64_tlb_flush_mmu(tlb, start, end); - - /* keep the page table cache within bounds */ - check_pgt_cache(); - - put_cpu_var(mmu_gathers); -} - -/* - * Logically, this routine frees PAGE. On MP machines, the actual freeing of the page - * must be delayed until after the TLB has been flushed (see comments at the beginning of - * this file). - */ -static inline void -tlb_remove_page (struct mmu_gather *tlb, struct page *page) -{ - tlb->need_flush = 1; - - if (tlb_fast_mode(tlb)) { - free_page_and_swap_cache(page); - return; - } - tlb->pages[tlb->nr++] = page; - if (tlb->nr >= FREE_PTE_NR) - ia64_tlb_flush_mmu(tlb, tlb->start_addr, tlb->end_addr); -} - -/* - * Remove TLB entry for PTE mapped at virtual address ADDRESS. This is called for any - * PTE, not just those pointing to (normal) physical memory. - */ -static inline void -__tlb_remove_tlb_entry (struct mmu_gather *tlb, pte_t *ptep, unsigned long address) -{ - if (tlb->start_addr == ~0UL) - tlb->start_addr = address; - tlb->end_addr = address + PAGE_SIZE; -} - -#define tlb_migrate_finish(mm) platform_tlb_migrate_finish(mm) - -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) - -#define tlb_remove_tlb_entry(tlb, ptep, addr) \ -do { \ - tlb->need_flush = 1; \ - __tlb_remove_tlb_entry(tlb, ptep, addr); \ -} while (0) - -#define pte_free_tlb(tlb, ptep) \ -do { \ - tlb->need_flush = 1; \ - __pte_free_tlb(tlb, ptep); \ -} while (0) - -#define pmd_free_tlb(tlb, ptep) \ -do { \ - tlb->need_flush = 1; \ - __pmd_free_tlb(tlb, ptep); \ -} while (0) - -#define pud_free_tlb(tlb, pudp) \ -do { \ - tlb->need_flush = 1; \ - __pud_free_tlb(tlb, pudp); \ -} while (0) - -#endif /* _ASM_IA64_TLB_H */ diff --git a/include/asm-ia64/tlbflush.h b/include/asm-ia64/tlbflush.h deleted file mode 100644 index 3be25dfed164..000000000000 --- a/include/asm-ia64/tlbflush.h +++ /dev/null @@ -1,102 +0,0 @@ -#ifndef _ASM_IA64_TLBFLUSH_H -#define _ASM_IA64_TLBFLUSH_H - -/* - * Copyright (C) 2002 Hewlett-Packard Co - * David Mosberger-Tang - */ - - -#include - -#include -#include -#include - -/* - * Now for some TLB flushing routines. This is the kind of stuff that - * can be very expensive, so try to avoid them whenever possible. - */ -extern void setup_ptcg_sem(int max_purges, int from_palo); - -/* - * Flush everything (kernel mapping may also have changed due to - * vmalloc/vfree). - */ -extern void local_flush_tlb_all (void); - -#ifdef CONFIG_SMP - extern void smp_flush_tlb_all (void); - extern void smp_flush_tlb_mm (struct mm_struct *mm); - extern void smp_flush_tlb_cpumask (cpumask_t xcpumask); -# define flush_tlb_all() smp_flush_tlb_all() -#else -# define flush_tlb_all() local_flush_tlb_all() -# define smp_flush_tlb_cpumask(m) local_flush_tlb_all() -#endif - -static inline void -local_finish_flush_tlb_mm (struct mm_struct *mm) -{ - if (mm == current->active_mm) - activate_context(mm); -} - -/* - * Flush a specified user mapping. This is called, e.g., as a result of fork() and - * exit(). fork() ends up here because the copy-on-write mechanism needs to write-protect - * the PTEs of the parent task. - */ -static inline void -flush_tlb_mm (struct mm_struct *mm) -{ - if (!mm) - return; - - set_bit(mm->context, ia64_ctx.flushmap); - mm->context = 0; - - if (atomic_read(&mm->mm_users) == 0) - return; /* happens as a result of exit_mmap() */ - -#ifdef CONFIG_SMP - smp_flush_tlb_mm(mm); -#else - local_finish_flush_tlb_mm(mm); -#endif -} - -extern void flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long end); - -/* - * Page-granular tlb flush. - */ -static inline void -flush_tlb_page (struct vm_area_struct *vma, unsigned long addr) -{ -#ifdef CONFIG_SMP - flush_tlb_range(vma, (addr & PAGE_MASK), (addr & PAGE_MASK) + PAGE_SIZE); -#else - if (vma->vm_mm == current->active_mm) - ia64_ptcl(addr, (PAGE_SHIFT << 2)); - else - vma->vm_mm->context = 0; -#endif -} - -/* - * Flush the local TLB. Invoked from another cpu using an IPI. - */ -#ifdef CONFIG_SMP -void smp_local_flush_tlb(void); -#else -#define smp_local_flush_tlb() -#endif - -static inline void flush_tlb_kernel_range(unsigned long start, - unsigned long end) -{ - flush_tlb_all(); /* XXX fix me */ -} - -#endif /* _ASM_IA64_TLBFLUSH_H */ diff --git a/include/asm-ia64/topology.h b/include/asm-ia64/topology.h deleted file mode 100644 index 32863b3bb1d3..000000000000 --- a/include/asm-ia64/topology.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * linux/include/asm-ia64/topology.h - * - * Copyright (C) 2002, Erich Focht, NEC - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef _ASM_IA64_TOPOLOGY_H -#define _ASM_IA64_TOPOLOGY_H - -#include -#include -#include - -#ifdef CONFIG_NUMA - -/* Nodes w/o CPUs are preferred for memory allocations, see build_zonelists */ -#define PENALTY_FOR_NODE_WITH_CPUS 255 - -/* - * Distance above which we begin to use zone reclaim - */ -#define RECLAIM_DISTANCE 15 - -/* - * Returns the number of the node containing CPU 'cpu' - */ -#define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu]) - -/* - * Returns a bitmask of CPUs on Node 'node'. - */ -#define node_to_cpumask(node) (node_to_cpu_mask[node]) - -/* - * Returns the number of the node containing Node 'nid'. - * Not implemented here. Multi-level hierarchies detected with - * the help of node_distance(). - */ -#define parent_node(nid) (nid) - -/* - * Returns the number of the first CPU on Node 'node'. - */ -#define node_to_first_cpu(node) (first_cpu(node_to_cpumask(node))) - -/* - * Determines the node for a given pci bus - */ -#define pcibus_to_node(bus) PCI_CONTROLLER(bus)->node - -void build_cpu_to_node_map(void); - -#define SD_CPU_INIT (struct sched_domain) { \ - .span = CPU_MASK_NONE, \ - .parent = NULL, \ - .child = NULL, \ - .groups = NULL, \ - .min_interval = 1, \ - .max_interval = 4, \ - .busy_factor = 64, \ - .imbalance_pct = 125, \ - .cache_nice_tries = 2, \ - .busy_idx = 2, \ - .idle_idx = 1, \ - .newidle_idx = 2, \ - .wake_idx = 1, \ - .forkexec_idx = 1, \ - .flags = SD_LOAD_BALANCE \ - | SD_BALANCE_NEWIDLE \ - | SD_BALANCE_EXEC \ - | SD_WAKE_AFFINE, \ - .last_balance = jiffies, \ - .balance_interval = 1, \ - .nr_balance_failed = 0, \ -} - -/* sched_domains SD_NODE_INIT for IA64 NUMA machines */ -#define SD_NODE_INIT (struct sched_domain) { \ - .span = CPU_MASK_NONE, \ - .parent = NULL, \ - .child = NULL, \ - .groups = NULL, \ - .min_interval = 8, \ - .max_interval = 8*(min(num_online_cpus(), 32)), \ - .busy_factor = 64, \ - .imbalance_pct = 125, \ - .cache_nice_tries = 2, \ - .busy_idx = 3, \ - .idle_idx = 2, \ - .newidle_idx = 2, \ - .wake_idx = 1, \ - .forkexec_idx = 1, \ - .flags = SD_LOAD_BALANCE \ - | SD_BALANCE_EXEC \ - | SD_BALANCE_FORK \ - | SD_SERIALIZE \ - | SD_WAKE_BALANCE, \ - .last_balance = jiffies, \ - .balance_interval = 64, \ - .nr_balance_failed = 0, \ -} - -#endif /* CONFIG_NUMA */ - -#ifdef CONFIG_SMP -#define topology_physical_package_id(cpu) (cpu_data(cpu)->socket_id) -#define topology_core_id(cpu) (cpu_data(cpu)->core_id) -#define topology_core_siblings(cpu) (cpu_core_map[cpu]) -#define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu)) -#define smt_capable() (smp_num_siblings > 1) -#endif - -extern void arch_fix_phys_package_id(int num, u32 slot); - -#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ - CPU_MASK_ALL : \ - node_to_cpumask(pcibus_to_node(bus)) \ - ) - -#include - -#endif /* _ASM_IA64_TOPOLOGY_H */ diff --git a/include/asm-ia64/types.h b/include/asm-ia64/types.h deleted file mode 100644 index e36b3716e718..000000000000 --- a/include/asm-ia64/types.h +++ /dev/null @@ -1,46 +0,0 @@ -#ifndef _ASM_IA64_TYPES_H -#define _ASM_IA64_TYPES_H - -/* - * This file is never included by application software unless explicitly requested (e.g., - * via linux/types.h) in which case the application is Linux specific so (user-) name - * space pollution is not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - * - * Based on . - * - * Modified 1998-2000, 2002 - * David Mosberger-Tang , Hewlett-Packard Co - */ - -#include - -#ifdef __ASSEMBLY__ -# define __IA64_UL(x) (x) -# define __IA64_UL_CONST(x) x - -# ifdef __KERNEL__ -# define BITS_PER_LONG 64 -# endif - -#else -# define __IA64_UL(x) ((unsigned long)(x)) -# define __IA64_UL_CONST(x) x##UL - -typedef unsigned int umode_t; - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -# ifdef __KERNEL__ - -#define BITS_PER_LONG 64 - -/* DMA addresses are 64-bits wide, in general. */ - -typedef u64 dma_addr_t; - -# endif /* __KERNEL__ */ -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_IA64_TYPES_H */ diff --git a/include/asm-ia64/uaccess.h b/include/asm-ia64/uaccess.h deleted file mode 100644 index 449c8c0fa2bd..000000000000 --- a/include/asm-ia64/uaccess.h +++ /dev/null @@ -1,401 +0,0 @@ -#ifndef _ASM_IA64_UACCESS_H -#define _ASM_IA64_UACCESS_H - -/* - * This file defines various macros to transfer memory areas across - * the user/kernel boundary. This needs to be done carefully because - * this code is executed in kernel mode and uses user-specified - * addresses. Thus, we need to be careful not to let the user to - * trick us into accessing kernel memory that would normally be - * inaccessible. This code is also fairly performance sensitive, - * so we want to spend as little time doing safety checks as - * possible. - * - * To make matters a bit more interesting, these macros sometimes also - * called from within the kernel itself, in which case the address - * validity check must be skipped. The get_fs() macro tells us what - * to do: if get_fs()==USER_DS, checking is performed, if - * get_fs()==KERNEL_DS, checking is bypassed. - * - * Note that even if the memory area specified by the user is in a - * valid address range, it is still possible that we'll get a page - * fault while accessing it. This is handled by filling out an - * exception handler fixup entry for each instruction that has the - * potential to fault. When such a fault occurs, the page fault - * handler checks to see whether the faulting instruction has a fixup - * associated and, if so, sets r8 to -EFAULT and clears r9 to 0 and - * then resumes execution at the continuation point. - * - * Based on . - * - * Copyright (C) 1998, 1999, 2001-2004 Hewlett-Packard Co - * David Mosberger-Tang - */ - -#include -#include -#include -#include -#include - -#include -#include -#include - -/* - * For historical reasons, the following macros are grossly misnamed: - */ -#define KERNEL_DS ((mm_segment_t) { ~0UL }) /* cf. access_ok() */ -#define USER_DS ((mm_segment_t) { TASK_SIZE-1 }) /* cf. access_ok() */ - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) - -#define segment_eq(a, b) ((a).seg == (b).seg) - -/* - * When accessing user memory, we need to make sure the entire area really is in - * user-level space. In order to do this efficiently, we make sure that the page at - * address TASK_SIZE is never valid. We also need to make sure that the address doesn't - * point inside the virtually mapped linear page table. - */ -#define __access_ok(addr, size, segment) \ -({ \ - __chk_user_ptr(addr); \ - (likely((unsigned long) (addr) <= (segment).seg) \ - && ((segment).seg == KERNEL_DS.seg \ - || likely(REGION_OFFSET((unsigned long) (addr)) < RGN_MAP_LIMIT))); \ -}) -#define access_ok(type, addr, size) __access_ok((addr), (size), get_fs()) - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - * - * Careful to not - * (a) re-use the arguments for side effects (sizeof/typeof is ok) - * (b) require any knowledge of processes at this stage - */ -#define put_user(x, ptr) __put_user_check((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)), get_fs()) -#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr)), get_fs()) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the programmer has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x, ptr) __put_user_nocheck((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr))) -#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) - -extern long __put_user_unaligned_unknown (void); - -#define __put_user_unaligned(x, ptr) \ -({ \ - long __ret; \ - switch (sizeof(*(ptr))) { \ - case 1: __ret = __put_user((x), (ptr)); break; \ - case 2: __ret = (__put_user((x), (u8 __user *)(ptr))) \ - | (__put_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break; \ - case 4: __ret = (__put_user((x), (u16 __user *)(ptr))) \ - | (__put_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break; \ - case 8: __ret = (__put_user((x), (u32 __user *)(ptr))) \ - | (__put_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break; \ - default: __ret = __put_user_unaligned_unknown(); \ - } \ - __ret; \ -}) - -extern long __get_user_unaligned_unknown (void); - -#define __get_user_unaligned(x, ptr) \ -({ \ - long __ret; \ - switch (sizeof(*(ptr))) { \ - case 1: __ret = __get_user((x), (ptr)); break; \ - case 2: __ret = (__get_user((x), (u8 __user *)(ptr))) \ - | (__get_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break; \ - case 4: __ret = (__get_user((x), (u16 __user *)(ptr))) \ - | (__get_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break; \ - case 8: __ret = (__get_user((x), (u32 __user *)(ptr))) \ - | (__get_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break; \ - default: __ret = __get_user_unaligned_unknown(); \ - } \ - __ret; \ -}) - -#ifdef ASM_SUPPORTED - struct __large_struct { unsigned long buf[100]; }; -# define __m(x) (*(struct __large_struct __user *)(x)) - -/* We need to declare the __ex_table section before we can use it in .xdata. */ -asm (".section \"__ex_table\", \"a\"\n\t.previous"); - -# define __get_user_size(val, addr, n, err) \ -do { \ - register long __gu_r8 asm ("r8") = 0; \ - register long __gu_r9 asm ("r9"); \ - asm ("\n[1:]\tld"#n" %0=%2%P2\t// %0 and %1 get overwritten by exception handler\n" \ - "\t.xdata4 \"__ex_table\", 1b-., 1f-.+4\n" \ - "[1:]" \ - : "=r"(__gu_r9), "=r"(__gu_r8) : "m"(__m(addr)), "1"(__gu_r8)); \ - (err) = __gu_r8; \ - (val) = __gu_r9; \ -} while (0) - -/* - * The "__put_user_size()" macro tells gcc it reads from memory instead of writing it. This - * is because they do not write to any memory gcc knows about, so there are no aliasing - * issues. - */ -# define __put_user_size(val, addr, n, err) \ -do { \ - register long __pu_r8 asm ("r8") = 0; \ - asm volatile ("\n[1:]\tst"#n" %1=%r2%P1\t// %0 gets overwritten by exception handler\n" \ - "\t.xdata4 \"__ex_table\", 1b-., 1f-.\n" \ - "[1:]" \ - : "=r"(__pu_r8) : "m"(__m(addr)), "rO"(val), "0"(__pu_r8)); \ - (err) = __pu_r8; \ -} while (0) - -#else /* !ASM_SUPPORTED */ -# define RELOC_TYPE 2 /* ip-rel */ -# define __get_user_size(val, addr, n, err) \ -do { \ - __ld_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE); \ - (err) = ia64_getreg(_IA64_REG_R8); \ - (val) = ia64_getreg(_IA64_REG_R9); \ -} while (0) -# define __put_user_size(val, addr, n, err) \ -do { \ - __st_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE, (unsigned long) (val)); \ - (err) = ia64_getreg(_IA64_REG_R8); \ -} while (0) -#endif /* !ASM_SUPPORTED */ - -extern void __get_user_unknown (void); - -/* - * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which - * could clobber r8 and r9 (among others). Thus, be careful not to evaluate it while - * using r8/r9. - */ -#define __do_get_user(check, x, ptr, size, segment) \ -({ \ - const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \ - __typeof__ (size) __gu_size = (size); \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - if (!check || __access_ok(__gu_ptr, size, segment)) \ - switch (__gu_size) { \ - case 1: __get_user_size(__gu_val, __gu_ptr, 1, __gu_err); break; \ - case 2: __get_user_size(__gu_val, __gu_ptr, 2, __gu_err); break; \ - case 4: __get_user_size(__gu_val, __gu_ptr, 4, __gu_err); break; \ - case 8: __get_user_size(__gu_val, __gu_ptr, 8, __gu_err); break; \ - default: __get_user_unknown(); break; \ - } \ - (x) = (__typeof__(*(__gu_ptr))) __gu_val; \ - __gu_err; \ -}) - -#define __get_user_nocheck(x, ptr, size) __do_get_user(0, x, ptr, size, KERNEL_DS) -#define __get_user_check(x, ptr, size, segment) __do_get_user(1, x, ptr, size, segment) - -extern void __put_user_unknown (void); - -/* - * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which - * could clobber r8 (among others). Thus, be careful not to evaluate them while using r8. - */ -#define __do_put_user(check, x, ptr, size, segment) \ -({ \ - __typeof__ (x) __pu_x = (x); \ - __typeof__ (*(ptr)) __user *__pu_ptr = (ptr); \ - __typeof__ (size) __pu_size = (size); \ - long __pu_err = -EFAULT; \ - \ - if (!check || __access_ok(__pu_ptr, __pu_size, segment)) \ - switch (__pu_size) { \ - case 1: __put_user_size(__pu_x, __pu_ptr, 1, __pu_err); break; \ - case 2: __put_user_size(__pu_x, __pu_ptr, 2, __pu_err); break; \ - case 4: __put_user_size(__pu_x, __pu_ptr, 4, __pu_err); break; \ - case 8: __put_user_size(__pu_x, __pu_ptr, 8, __pu_err); break; \ - default: __put_user_unknown(); break; \ - } \ - __pu_err; \ -}) - -#define __put_user_nocheck(x, ptr, size) __do_put_user(0, x, ptr, size, KERNEL_DS) -#define __put_user_check(x, ptr, size, segment) __do_put_user(1, x, ptr, size, segment) - -/* - * Complex access routines - */ -extern unsigned long __must_check __copy_user (void __user *to, const void __user *from, - unsigned long count); - -static inline unsigned long -__copy_to_user (void __user *to, const void *from, unsigned long count) -{ - return __copy_user(to, (__force void __user *) from, count); -} - -static inline unsigned long -__copy_from_user (void *to, const void __user *from, unsigned long count) -{ - return __copy_user((__force void __user *) to, from, count); -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user -#define copy_to_user(to, from, n) \ -({ \ - void __user *__cu_to = (to); \ - const void *__cu_from = (from); \ - long __cu_len = (n); \ - \ - if (__access_ok(__cu_to, __cu_len, get_fs())) \ - __cu_len = __copy_user(__cu_to, (__force void __user *) __cu_from, __cu_len); \ - __cu_len; \ -}) - -#define copy_from_user(to, from, n) \ -({ \ - void *__cu_to = (to); \ - const void __user *__cu_from = (from); \ - long __cu_len = (n); \ - \ - __chk_user_ptr(__cu_from); \ - if (__access_ok(__cu_from, __cu_len, get_fs())) \ - __cu_len = __copy_user((__force void __user *) __cu_to, __cu_from, __cu_len); \ - __cu_len; \ -}) - -#define __copy_in_user(to, from, size) __copy_user((to), (from), (size)) - -static inline unsigned long -copy_in_user (void __user *to, const void __user *from, unsigned long n) -{ - if (likely(access_ok(VERIFY_READ, from, n) && access_ok(VERIFY_WRITE, to, n))) - n = __copy_user(to, from, n); - return n; -} - -extern unsigned long __do_clear_user (void __user *, unsigned long); - -#define __clear_user(to, n) __do_clear_user(to, n) - -#define clear_user(to, n) \ -({ \ - unsigned long __cu_len = (n); \ - if (__access_ok(to, __cu_len, get_fs())) \ - __cu_len = __do_clear_user(to, __cu_len); \ - __cu_len; \ -}) - - -/* - * Returns: -EFAULT if exception before terminator, N if the entire buffer filled, else - * strlen. - */ -extern long __must_check __strncpy_from_user (char *to, const char __user *from, long to_len); - -#define strncpy_from_user(to, from, n) \ -({ \ - const char __user * __sfu_from = (from); \ - long __sfu_ret = -EFAULT; \ - if (__access_ok(__sfu_from, 0, get_fs())) \ - __sfu_ret = __strncpy_from_user((to), __sfu_from, (n)); \ - __sfu_ret; \ -}) - -/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ -extern unsigned long __strlen_user (const char __user *); - -#define strlen_user(str) \ -({ \ - const char __user *__su_str = (str); \ - unsigned long __su_ret = 0; \ - if (__access_ok(__su_str, 0, get_fs())) \ - __su_ret = __strlen_user(__su_str); \ - __su_ret; \ -}) - -/* - * Returns: 0 if exception before NUL or reaching the supplied limit - * (N), a value greater than N if the limit would be exceeded, else - * strlen. - */ -extern unsigned long __strnlen_user (const char __user *, long); - -#define strnlen_user(str, len) \ -({ \ - const char __user *__su_str = (str); \ - unsigned long __su_ret = 0; \ - if (__access_ok(__su_str, 0, get_fs())) \ - __su_ret = __strnlen_user(__su_str, len); \ - __su_ret; \ -}) - -/* Generic code can't deal with the location-relative format that we use for compactness. */ -#define ARCH_HAS_SORT_EXTABLE -#define ARCH_HAS_SEARCH_EXTABLE - -struct exception_table_entry { - int addr; /* location-relative address of insn this fixup is for */ - int cont; /* location-relative continuation addr.; if bit 2 is set, r9 is set to 0 */ -}; - -extern void ia64_handle_exception (struct pt_regs *regs, const struct exception_table_entry *e); -extern const struct exception_table_entry *search_exception_tables (unsigned long addr); - -static inline int -ia64_done_with_exception (struct pt_regs *regs) -{ - const struct exception_table_entry *e; - e = search_exception_tables(regs->cr_iip + ia64_psr(regs)->ri); - if (e) { - ia64_handle_exception(regs, e); - return 1; - } - return 0; -} - -#define ARCH_HAS_TRANSLATE_MEM_PTR 1 -static __inline__ char * -xlate_dev_mem_ptr (unsigned long p) -{ - struct page *page; - char * ptr; - - page = pfn_to_page(p >> PAGE_SHIFT); - if (PageUncached(page)) - ptr = (char *)p + __IA64_UNCACHED_OFFSET; - else - ptr = __va(p); - - return ptr; -} - -/* - * Convert a virtual cached kernel memory pointer to an uncached pointer - */ -static __inline__ char * -xlate_dev_kmem_ptr (char * p) -{ - struct page *page; - char * ptr; - - page = virt_to_page((unsigned long)p); - if (PageUncached(page)) - ptr = (char *)__pa(p) + __IA64_UNCACHED_OFFSET; - else - ptr = p; - - return ptr; -} - -#endif /* _ASM_IA64_UACCESS_H */ diff --git a/include/asm-ia64/ucontext.h b/include/asm-ia64/ucontext.h deleted file mode 100644 index bf573dc8ca6a..000000000000 --- a/include/asm-ia64/ucontext.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_IA64_UCONTEXT_H -#define _ASM_IA64_UCONTEXT_H - -struct ucontext { - struct sigcontext uc_mcontext; -}; - -#define uc_link uc_mcontext.sc_gr[0] /* wrong type; nobody cares */ -#define uc_sigmask uc_mcontext.sc_sigmask -#define uc_stack uc_mcontext.sc_stack - -#endif /* _ASM_IA64_UCONTEXT_H */ diff --git a/include/asm-ia64/unaligned.h b/include/asm-ia64/unaligned.h deleted file mode 100644 index 7bddc7f58584..000000000000 --- a/include/asm-ia64/unaligned.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _ASM_IA64_UNALIGNED_H -#define _ASM_IA64_UNALIGNED_H - -#include -#include -#include - -#define get_unaligned __get_unaligned_le -#define put_unaligned __put_unaligned_le - -#endif /* _ASM_IA64_UNALIGNED_H */ diff --git a/include/asm-ia64/uncached.h b/include/asm-ia64/uncached.h deleted file mode 100644 index 13d7e65ca3cc..000000000000 --- a/include/asm-ia64/uncached.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * Copyright (C) 2001-2008 Silicon Graphics, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License - * as published by the Free Software Foundation. - * - * Prototypes for the uncached page allocator - */ - -extern unsigned long uncached_alloc_page(int starting_nid, int n_pages); -extern void uncached_free_page(unsigned long uc_addr, int n_pages); diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h deleted file mode 100644 index d535833aab5e..000000000000 --- a/include/asm-ia64/unistd.h +++ /dev/null @@ -1,384 +0,0 @@ -#ifndef _ASM_IA64_UNISTD_H -#define _ASM_IA64_UNISTD_H - -/* - * IA-64 Linux syscall numbers and inline-functions. - * - * Copyright (C) 1998-2005 Hewlett-Packard Co - * David Mosberger-Tang - */ - -#include - -#define __BREAK_SYSCALL __IA64_BREAK_SYSCALL - -#define __NR_ni_syscall 1024 -#define __NR_exit 1025 -#define __NR_read 1026 -#define __NR_write 1027 -#define __NR_open 1028 -#define __NR_close 1029 -#define __NR_creat 1030 -#define __NR_link 1031 -#define __NR_unlink 1032 -#define __NR_execve 1033 -#define __NR_chdir 1034 -#define __NR_fchdir 1035 -#define __NR_utimes 1036 -#define __NR_mknod 1037 -#define __NR_chmod 1038 -#define __NR_chown 1039 -#define __NR_lseek 1040 -#define __NR_getpid 1041 -#define __NR_getppid 1042 -#define __NR_mount 1043 -#define __NR_umount 1044 -#define __NR_setuid 1045 -#define __NR_getuid 1046 -#define __NR_geteuid 1047 -#define __NR_ptrace 1048 -#define __NR_access 1049 -#define __NR_sync 1050 -#define __NR_fsync 1051 -#define __NR_fdatasync 1052 -#define __NR_kill 1053 -#define __NR_rename 1054 -#define __NR_mkdir 1055 -#define __NR_rmdir 1056 -#define __NR_dup 1057 -#define __NR_pipe 1058 -#define __NR_times 1059 -#define __NR_brk 1060 -#define __NR_setgid 1061 -#define __NR_getgid 1062 -#define __NR_getegid 1063 -#define __NR_acct 1064 -#define __NR_ioctl 1065 -#define __NR_fcntl 1066 -#define __NR_umask 1067 -#define __NR_chroot 1068 -#define __NR_ustat 1069 -#define __NR_dup2 1070 -#define __NR_setreuid 1071 -#define __NR_setregid 1072 -#define __NR_getresuid 1073 -#define __NR_setresuid 1074 -#define __NR_getresgid 1075 -#define __NR_setresgid 1076 -#define __NR_getgroups 1077 -#define __NR_setgroups 1078 -#define __NR_getpgid 1079 -#define __NR_setpgid 1080 -#define __NR_setsid 1081 -#define __NR_getsid 1082 -#define __NR_sethostname 1083 -#define __NR_setrlimit 1084 -#define __NR_getrlimit 1085 -#define __NR_getrusage 1086 -#define __NR_gettimeofday 1087 -#define __NR_settimeofday 1088 -#define __NR_select 1089 -#define __NR_poll 1090 -#define __NR_symlink 1091 -#define __NR_readlink 1092 -#define __NR_uselib 1093 -#define __NR_swapon 1094 -#define __NR_swapoff 1095 -#define __NR_reboot 1096 -#define __NR_truncate 1097 -#define __NR_ftruncate 1098 -#define __NR_fchmod 1099 -#define __NR_fchown 1100 -#define __NR_getpriority 1101 -#define __NR_setpriority 1102 -#define __NR_statfs 1103 -#define __NR_fstatfs 1104 -#define __NR_gettid 1105 -#define __NR_semget 1106 -#define __NR_semop 1107 -#define __NR_semctl 1108 -#define __NR_msgget 1109 -#define __NR_msgsnd 1110 -#define __NR_msgrcv 1111 -#define __NR_msgctl 1112 -#define __NR_shmget 1113 -#define __NR_shmat 1114 -#define __NR_shmdt 1115 -#define __NR_shmctl 1116 -/* also known as klogctl() in GNU libc: */ -#define __NR_syslog 1117 -#define __NR_setitimer 1118 -#define __NR_getitimer 1119 -/* 1120 was __NR_old_stat */ -/* 1121 was __NR_old_lstat */ -/* 1122 was __NR_old_fstat */ -#define __NR_vhangup 1123 -#define __NR_lchown 1124 -#define __NR_remap_file_pages 1125 -#define __NR_wait4 1126 -#define __NR_sysinfo 1127 -#define __NR_clone 1128 -#define __NR_setdomainname 1129 -#define __NR_uname 1130 -#define __NR_adjtimex 1131 -/* 1132 was __NR_create_module */ -#define __NR_init_module 1133 -#define __NR_delete_module 1134 -/* 1135 was __NR_get_kernel_syms */ -/* 1136 was __NR_query_module */ -#define __NR_quotactl 1137 -#define __NR_bdflush 1138 -#define __NR_sysfs 1139 -#define __NR_personality 1140 -#define __NR_afs_syscall 1141 -#define __NR_setfsuid 1142 -#define __NR_setfsgid 1143 -#define __NR_getdents 1144 -#define __NR_flock 1145 -#define __NR_readv 1146 -#define __NR_writev 1147 -#define __NR_pread64 1148 -#define __NR_pwrite64 1149 -#define __NR__sysctl 1150 -#define __NR_mmap 1151 -#define __NR_munmap 1152 -#define __NR_mlock 1153 -#define __NR_mlockall 1154 -#define __NR_mprotect 1155 -#define __NR_mremap 1156 -#define __NR_msync 1157 -#define __NR_munlock 1158 -#define __NR_munlockall 1159 -#define __NR_sched_getparam 1160 -#define __NR_sched_setparam 1161 -#define __NR_sched_getscheduler 1162 -#define __NR_sched_setscheduler 1163 -#define __NR_sched_yield 1164 -#define __NR_sched_get_priority_max 1165 -#define __NR_sched_get_priority_min 1166 -#define __NR_sched_rr_get_interval 1167 -#define __NR_nanosleep 1168 -#define __NR_nfsservctl 1169 -#define __NR_prctl 1170 -/* 1171 is reserved for backwards compatibility with old __NR_getpagesize */ -#define __NR_mmap2 1172 -#define __NR_pciconfig_read 1173 -#define __NR_pciconfig_write 1174 -#define __NR_perfmonctl 1175 -#define __NR_sigaltstack 1176 -#define __NR_rt_sigaction 1177 -#define __NR_rt_sigpending 1178 -#define __NR_rt_sigprocmask 1179 -#define __NR_rt_sigqueueinfo 1180 -#define __NR_rt_sigreturn 1181 -#define __NR_rt_sigsuspend 1182 -#define __NR_rt_sigtimedwait 1183 -#define __NR_getcwd 1184 -#define __NR_capget 1185 -#define __NR_capset 1186 -#define __NR_sendfile 1187 -#define __NR_getpmsg 1188 -#define __NR_putpmsg 1189 -#define __NR_socket 1190 -#define __NR_bind 1191 -#define __NR_connect 1192 -#define __NR_listen 1193 -#define __NR_accept 1194 -#define __NR_getsockname 1195 -#define __NR_getpeername 1196 -#define __NR_socketpair 1197 -#define __NR_send 1198 -#define __NR_sendto 1199 -#define __NR_recv 1200 -#define __NR_recvfrom 1201 -#define __NR_shutdown 1202 -#define __NR_setsockopt 1203 -#define __NR_getsockopt 1204 -#define __NR_sendmsg 1205 -#define __NR_recvmsg 1206 -#define __NR_pivot_root 1207 -#define __NR_mincore 1208 -#define __NR_madvise 1209 -#define __NR_stat 1210 -#define __NR_lstat 1211 -#define __NR_fstat 1212 -#define __NR_clone2 1213 -#define __NR_getdents64 1214 -#define __NR_getunwind 1215 -#define __NR_readahead 1216 -#define __NR_setxattr 1217 -#define __NR_lsetxattr 1218 -#define __NR_fsetxattr 1219 -#define __NR_getxattr 1220 -#define __NR_lgetxattr 1221 -#define __NR_fgetxattr 1222 -#define __NR_listxattr 1223 -#define __NR_llistxattr 1224 -#define __NR_flistxattr 1225 -#define __NR_removexattr 1226 -#define __NR_lremovexattr 1227 -#define __NR_fremovexattr 1228 -#define __NR_tkill 1229 -#define __NR_futex 1230 -#define __NR_sched_setaffinity 1231 -#define __NR_sched_getaffinity 1232 -#define __NR_set_tid_address 1233 -#define __NR_fadvise64 1234 -#define __NR_tgkill 1235 -#define __NR_exit_group 1236 -#define __NR_lookup_dcookie 1237 -#define __NR_io_setup 1238 -#define __NR_io_destroy 1239 -#define __NR_io_getevents 1240 -#define __NR_io_submit 1241 -#define __NR_io_cancel 1242 -#define __NR_epoll_create 1243 -#define __NR_epoll_ctl 1244 -#define __NR_epoll_wait 1245 -#define __NR_restart_syscall 1246 -#define __NR_semtimedop 1247 -#define __NR_timer_create 1248 -#define __NR_timer_settime 1249 -#define __NR_timer_gettime 1250 -#define __NR_timer_getoverrun 1251 -#define __NR_timer_delete 1252 -#define __NR_clock_settime 1253 -#define __NR_clock_gettime 1254 -#define __NR_clock_getres 1255 -#define __NR_clock_nanosleep 1256 -#define __NR_fstatfs64 1257 -#define __NR_statfs64 1258 -#define __NR_mbind 1259 -#define __NR_get_mempolicy 1260 -#define __NR_set_mempolicy 1261 -#define __NR_mq_open 1262 -#define __NR_mq_unlink 1263 -#define __NR_mq_timedsend 1264 -#define __NR_mq_timedreceive 1265 -#define __NR_mq_notify 1266 -#define __NR_mq_getsetattr 1267 -#define __NR_kexec_load 1268 -#define __NR_vserver 1269 -#define __NR_waitid 1270 -#define __NR_add_key 1271 -#define __NR_request_key 1272 -#define __NR_keyctl 1273 -#define __NR_ioprio_set 1274 -#define __NR_ioprio_get 1275 -#define __NR_move_pages 1276 -#define __NR_inotify_init 1277 -#define __NR_inotify_add_watch 1278 -#define __NR_inotify_rm_watch 1279 -#define __NR_migrate_pages 1280 -#define __NR_openat 1281 -#define __NR_mkdirat 1282 -#define __NR_mknodat 1283 -#define __NR_fchownat 1284 -#define __NR_futimesat 1285 -#define __NR_newfstatat 1286 -#define __NR_unlinkat 1287 -#define __NR_renameat 1288 -#define __NR_linkat 1289 -#define __NR_symlinkat 1290 -#define __NR_readlinkat 1291 -#define __NR_fchmodat 1292 -#define __NR_faccessat 1293 -#define __NR_pselect6 1294 -#define __NR_ppoll 1295 -#define __NR_unshare 1296 -#define __NR_splice 1297 -#define __NR_set_robust_list 1298 -#define __NR_get_robust_list 1299 -#define __NR_sync_file_range 1300 -#define __NR_tee 1301 -#define __NR_vmsplice 1302 -#define __NR_fallocate 1303 -#define __NR_getcpu 1304 -#define __NR_epoll_pwait 1305 -#define __NR_utimensat 1306 -#define __NR_signalfd 1307 -#define __NR_timerfd 1308 -#define __NR_eventfd 1309 -#define __NR_timerfd_create 1310 -#define __NR_timerfd_settime 1311 -#define __NR_timerfd_gettime 1312 -#define __NR_signalfd4 1313 -#define __NR_eventfd2 1314 -#define __NR_epoll_create1 1315 -#define __NR_dup3 1316 -#define __NR_pipe2 1317 -#define __NR_inotify_init1 1318 - -#ifdef __KERNEL__ - - -#define NR_syscalls 295 /* length of syscall table */ - -/* - * The following defines stop scripts/checksyscalls.sh from complaining about - * unimplemented system calls. Glibc provides for each of these by using - * more modern equivalent system calls. - */ -#define __IGNORE_fork /* clone() */ -#define __IGNORE_time /* gettimeofday() */ -#define __IGNORE_alarm /* setitimer(ITIMER_REAL, ... */ -#define __IGNORE_pause /* rt_sigprocmask(), rt_sigsuspend() */ -#define __IGNORE_utime /* utimes() */ -#define __IGNORE_getpgrp /* getpgid() */ -#define __IGNORE_vfork /* clone() */ - -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND - -#ifdef CONFIG_IA32_SUPPORT -# define __ARCH_WANT_SYS_FADVISE64 -# define __ARCH_WANT_SYS_GETPGRP -# define __ARCH_WANT_SYS_LLSEEK -# define __ARCH_WANT_SYS_NICE -# define __ARCH_WANT_SYS_OLD_GETRLIMIT -# define __ARCH_WANT_SYS_OLDUMOUNT -# define __ARCH_WANT_SYS_SIGPENDING -# define __ARCH_WANT_SYS_SIGPROCMASK -# define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND -# define __ARCH_WANT_COMPAT_SYS_TIME -#endif - -#if !defined(__ASSEMBLY__) && !defined(ASSEMBLER) - -#include -#include -#include - -extern long __ia64_syscall (long a0, long a1, long a2, long a3, long a4, long nr); - -asmlinkage unsigned long sys_mmap( - unsigned long addr, unsigned long len, - int prot, int flags, - int fd, long off); -asmlinkage unsigned long sys_mmap2( - unsigned long addr, unsigned long len, - int prot, int flags, - int fd, long pgoff); -struct pt_regs; -struct sigaction; -long sys_execve(char __user *filename, char __user * __user *argv, - char __user * __user *envp, struct pt_regs *regs); -asmlinkage long sys_pipe(void); -asmlinkage long sys_rt_sigaction(int sig, - const struct sigaction __user *act, - struct sigaction __user *oact, - size_t sigsetsize); - -/* - * "Conditional" syscalls - * - * Note, this macro can only be used in the file which defines sys_ni_syscall, i.e., in - * kernel/sys_ni.c. This version causes warnings because the declaration isn't a - * proper prototype, but we can't use __typeof__ either, because not all cond_syscall() - * declarations have prototypes at the moment. - */ -#define cond_syscall(x) asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall"))) - -#endif /* !__ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _ASM_IA64_UNISTD_H */ diff --git a/include/asm-ia64/unwind.h b/include/asm-ia64/unwind.h deleted file mode 100644 index 1af3875f1a57..000000000000 --- a/include/asm-ia64/unwind.h +++ /dev/null @@ -1,233 +0,0 @@ -#ifndef _ASM_IA64_UNWIND_H -#define _ASM_IA64_UNWIND_H - -/* - * Copyright (C) 1999-2000, 2003 Hewlett-Packard Co - * David Mosberger-Tang - * - * A simple API for unwinding kernel stacks. This is used for - * debugging and error reporting purposes. The kernel doesn't need - * full-blown stack unwinding with all the bells and whitles, so there - * is not much point in implementing the full IA-64 unwind API (though - * it would of course be possible to implement the kernel API on top - * of it). - */ - -struct task_struct; /* forward declaration */ -struct switch_stack; /* forward declaration */ - -enum unw_application_register { - UNW_AR_BSP, - UNW_AR_BSPSTORE, - UNW_AR_PFS, - UNW_AR_RNAT, - UNW_AR_UNAT, - UNW_AR_LC, - UNW_AR_EC, - UNW_AR_FPSR, - UNW_AR_RSC, - UNW_AR_CCV, - UNW_AR_CSD, - UNW_AR_SSD -}; - -/* - * The following declarations are private to the unwind - * implementation: - */ - -struct unw_stack { - unsigned long limit; - unsigned long top; -}; - -#define UNW_FLAG_INTERRUPT_FRAME (1UL << 0) - -/* - * No user of this module should every access this structure directly - * as it is subject to change. It is declared here solely so we can - * use automatic variables. - */ -struct unw_frame_info { - struct unw_stack regstk; - struct unw_stack memstk; - unsigned int flags; - short hint; - short prev_script; - - /* current frame info: */ - unsigned long bsp; /* backing store pointer value */ - unsigned long sp; /* stack pointer value */ - unsigned long psp; /* previous sp value */ - unsigned long ip; /* instruction pointer value */ - unsigned long pr; /* current predicate values */ - unsigned long *cfm_loc; /* cfm save location (or NULL) */ - unsigned long pt; /* struct pt_regs location */ - - struct task_struct *task; - struct switch_stack *sw; - - /* preserved state: */ - unsigned long *bsp_loc; /* previous bsp save location */ - unsigned long *bspstore_loc; - unsigned long *pfs_loc; - unsigned long *rnat_loc; - unsigned long *rp_loc; - unsigned long *pri_unat_loc; - unsigned long *unat_loc; - unsigned long *pr_loc; - unsigned long *lc_loc; - unsigned long *fpsr_loc; - struct unw_ireg { - unsigned long *loc; - struct unw_ireg_nat { - unsigned long type : 3; /* enum unw_nat_type */ - signed long off : 61; /* NaT word is at loc+nat.off */ - } nat; - } r4, r5, r6, r7; - unsigned long *b1_loc, *b2_loc, *b3_loc, *b4_loc, *b5_loc; - struct ia64_fpreg *f2_loc, *f3_loc, *f4_loc, *f5_loc, *fr_loc[16]; -}; - -/* - * The official API follows below: - */ - -struct unw_table_entry { - u64 start_offset; - u64 end_offset; - u64 info_offset; -}; - -/* - * Initialize unwind support. - */ -extern void unw_init (void); - -extern void *unw_add_unwind_table (const char *name, unsigned long segment_base, unsigned long gp, - const void *table_start, const void *table_end); - -extern void unw_remove_unwind_table (void *handle); - -/* - * Prepare to unwind blocked task t. - */ -extern void unw_init_from_blocked_task (struct unw_frame_info *info, struct task_struct *t); - -extern void unw_init_frame_info (struct unw_frame_info *info, struct task_struct *t, - struct switch_stack *sw); - -/* - * Prepare to unwind the currently running thread. - */ -extern void unw_init_running (void (*callback)(struct unw_frame_info *info, void *arg), void *arg); - -/* - * Unwind to previous to frame. Returns 0 if successful, negative - * number in case of an error. - */ -extern int unw_unwind (struct unw_frame_info *info); - -/* - * Unwind until the return pointer is in user-land (or until an error - * occurs). Returns 0 if successful, negative number in case of - * error. - */ -extern int unw_unwind_to_user (struct unw_frame_info *info); - -#define unw_is_intr_frame(info) (((info)->flags & UNW_FLAG_INTERRUPT_FRAME) != 0) - -static inline int -unw_get_ip (struct unw_frame_info *info, unsigned long *valp) -{ - *valp = (info)->ip; - return 0; -} - -static inline int -unw_get_sp (struct unw_frame_info *info, unsigned long *valp) -{ - *valp = (info)->sp; - return 0; -} - -static inline int -unw_get_psp (struct unw_frame_info *info, unsigned long *valp) -{ - *valp = (info)->psp; - return 0; -} - -static inline int -unw_get_bsp (struct unw_frame_info *info, unsigned long *valp) -{ - *valp = (info)->bsp; - return 0; -} - -static inline int -unw_get_cfm (struct unw_frame_info *info, unsigned long *valp) -{ - *valp = *(info)->cfm_loc; - return 0; -} - -static inline int -unw_set_cfm (struct unw_frame_info *info, unsigned long val) -{ - *(info)->cfm_loc = val; - return 0; -} - -static inline int -unw_get_rp (struct unw_frame_info *info, unsigned long *val) -{ - if (!info->rp_loc) - return -1; - *val = *info->rp_loc; - return 0; -} - -extern int unw_access_gr (struct unw_frame_info *, int, unsigned long *, char *, int); -extern int unw_access_br (struct unw_frame_info *, int, unsigned long *, int); -extern int unw_access_fr (struct unw_frame_info *, int, struct ia64_fpreg *, int); -extern int unw_access_ar (struct unw_frame_info *, int, unsigned long *, int); -extern int unw_access_pr (struct unw_frame_info *, unsigned long *, int); - -static inline int -unw_set_gr (struct unw_frame_info *i, int n, unsigned long v, char nat) -{ - return unw_access_gr(i, n, &v, &nat, 1); -} - -static inline int -unw_set_br (struct unw_frame_info *i, int n, unsigned long v) -{ - return unw_access_br(i, n, &v, 1); -} - -static inline int -unw_set_fr (struct unw_frame_info *i, int n, struct ia64_fpreg v) -{ - return unw_access_fr(i, n, &v, 1); -} - -static inline int -unw_set_ar (struct unw_frame_info *i, int n, unsigned long v) -{ - return unw_access_ar(i, n, &v, 1); -} - -static inline int -unw_set_pr (struct unw_frame_info *i, unsigned long v) -{ - return unw_access_pr(i, &v, 1); -} - -#define unw_get_gr(i,n,v,nat) unw_access_gr(i,n,v,nat,0) -#define unw_get_br(i,n,v) unw_access_br(i,n,v,0) -#define unw_get_fr(i,n,v) unw_access_fr(i,n,v,0) -#define unw_get_ar(i,n,v) unw_access_ar(i,n,v,0) -#define unw_get_pr(i,v) unw_access_pr(i,v,0) - -#endif /* _ASM_UNWIND_H */ diff --git a/include/asm-ia64/user.h b/include/asm-ia64/user.h deleted file mode 100644 index 8b9821110348..000000000000 --- a/include/asm-ia64/user.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef _ASM_IA64_USER_H -#define _ASM_IA64_USER_H - -/* - * Core file format: The core file is written in such a way that gdb - * can understand it and provide useful information to the user (under - * linux we use the `trad-core' bfd). The file contents are as - * follows: - * - * upage: 1 page consisting of a user struct that tells gdb - * what is present in the file. Directly after this is a - * copy of the task_struct, which is currently not used by gdb, - * but it may come in handy at some point. All of the registers - * are stored as part of the upage. The upage should always be - * only one page long. - * data: The data segment follows next. We use current->end_text to - * current->brk to pick up all of the user variables, plus any memory - * that may have been sbrk'ed. No attempt is made to determine if a - * page is demand-zero or if a page is totally unused, we just cover - * the entire range. All of the addresses are rounded in such a way - * that an integral number of pages is written. - * stack: We need the stack information in order to get a meaningful - * backtrace. We need to write the data from usp to - * current->start_stack, so we round each of these in order to be able - * to write an integer number of pages. - * - * Modified 1998, 1999, 2001 - * David Mosberger-Tang , Hewlett-Packard Co - */ - -#include -#include - -#include - -#define EF_SIZE 3072 /* XXX fix me */ - -struct user { - unsigned long regs[EF_SIZE/8+32]; /* integer and fp regs */ - size_t u_tsize; /* text size (pages) */ - size_t u_dsize; /* data size (pages) */ - size_t u_ssize; /* stack size (pages) */ - unsigned long start_code; /* text starting address */ - unsigned long start_data; /* data starting address */ - unsigned long start_stack; /* stack starting address */ - long int signal; /* signal causing core dump */ - unsigned long u_ar0; /* help gdb find registers */ - unsigned long magic; /* identifies a core file */ - char u_comm[32]; /* user command name */ -}; - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_DATA_START_ADDR (u.start_data) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif /* _ASM_IA64_USER_H */ diff --git a/include/asm-ia64/ustack.h b/include/asm-ia64/ustack.h deleted file mode 100644 index 504167c35b8b..000000000000 --- a/include/asm-ia64/ustack.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_IA64_USTACK_H -#define _ASM_IA64_USTACK_H - -/* - * Constants for the user stack size - */ - -#ifdef __KERNEL__ -#include - -/* The absolute hard limit for stack size is 1/2 of the mappable space in the region */ -#define MAX_USER_STACK_SIZE (RGN_MAP_LIMIT/2) -#define STACK_TOP (0x6000000000000000UL + RGN_MAP_LIMIT) -#define STACK_TOP_MAX STACK_TOP -#endif - -/* Make a default stack size of 2GiB */ -#define DEFAULT_USER_STACK_SIZE (1UL << 31) - -#endif /* _ASM_IA64_USTACK_H */ diff --git a/include/asm-ia64/uv/uv_hub.h b/include/asm-ia64/uv/uv_hub.h deleted file mode 100644 index f607018af4a1..000000000000 --- a/include/asm-ia64/uv/uv_hub.h +++ /dev/null @@ -1,309 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * SGI UV architectural definitions - * - * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef __ASM_IA64_UV_HUB_H__ -#define __ASM_IA64_UV_HUB_H__ - -#include -#include -#include -#include - - -/* - * Addressing Terminology - * - * M - The low M bits of a physical address represent the offset - * into the blade local memory. RAM memory on a blade is physically - * contiguous (although various IO spaces may punch holes in - * it).. - * - * N - Number of bits in the node portion of a socket physical - * address. - * - * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of - * routers always have low bit of 1, C/MBricks have low bit - * equal to 0. Most addressing macros that target UV hub chips - * right shift the NASID by 1 to exclude the always-zero bit. - * NASIDs contain up to 15 bits. - * - * GNODE - NASID right shifted by 1 bit. Most mmrs contain gnodes instead - * of nasids. - * - * PNODE - the low N bits of the GNODE. The PNODE is the most useful variant - * of the nasid for socket usage. - * - * - * NumaLink Global Physical Address Format: - * +--------------------------------+---------------------+ - * |00..000| GNODE | NodeOffset | - * +--------------------------------+---------------------+ - * |<-------53 - M bits --->|<--------M bits -----> - * - * M - number of node offset bits (35 .. 40) - * - * - * Memory/UV-HUB Processor Socket Address Format: - * +----------------+---------------+---------------------+ - * |00..000000000000| PNODE | NodeOffset | - * +----------------+---------------+---------------------+ - * <--- N bits --->|<--------M bits -----> - * - * M - number of node offset bits (35 .. 40) - * N - number of PNODE bits (0 .. 10) - * - * Note: M + N cannot currently exceed 44 (x86_64) or 46 (IA64). - * The actual values are configuration dependent and are set at - * boot time. M & N values are set by the hardware/BIOS at boot. - */ - - -/* - * Maximum number of bricks in all partitions and in all coherency domains. - * This is the total number of bricks accessible in the numalink fabric. It - * includes all C & M bricks. Routers are NOT included. - * - * This value is also the value of the maximum number of non-router NASIDs - * in the numalink fabric. - * - * NOTE: a brick may contain 1 or 2 OS nodes. Don't get these confused. - */ -#define UV_MAX_NUMALINK_BLADES 16384 - -/* - * Maximum number of C/Mbricks within a software SSI (hardware may support - * more). - */ -#define UV_MAX_SSI_BLADES 1 - -/* - * The largest possible NASID of a C or M brick (+ 2) - */ -#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_NODES * 2) - -/* - * The following defines attributes of the HUB chip. These attributes are - * frequently referenced and are kept in the per-cpu data areas of each cpu. - * They are kept together in a struct to minimize cache misses. - */ -struct uv_hub_info_s { - unsigned long global_mmr_base; - unsigned long gpa_mask; - unsigned long gnode_upper; - unsigned long lowmem_remap_top; - unsigned long lowmem_remap_base; - unsigned short pnode; - unsigned short pnode_mask; - unsigned short coherency_domain_number; - unsigned short numa_blade_id; - unsigned char blade_processor_id; - unsigned char m_val; - unsigned char n_val; -}; -DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); -#define uv_hub_info (&__get_cpu_var(__uv_hub_info)) -#define uv_cpu_hub_info(cpu) (&per_cpu(__uv_hub_info, cpu)) - -/* - * Local & Global MMR space macros. - * Note: macros are intended to be used ONLY by inline functions - * in this file - not by other kernel code. - * n - NASID (full 15-bit global nasid) - * g - GNODE (full 15-bit global nasid, right shifted 1) - * p - PNODE (local part of nsids, right shifted 1) - */ -#define UV_NASID_TO_PNODE(n) (((n) >> 1) & uv_hub_info->pnode_mask) -#define UV_PNODE_TO_NASID(p) (((p) << 1) | uv_hub_info->gnode_upper) - -#define UV_LOCAL_MMR_BASE 0xf4000000UL -#define UV_GLOBAL_MMR32_BASE 0xf8000000UL -#define UV_GLOBAL_MMR64_BASE (uv_hub_info->global_mmr_base) - -#define UV_GLOBAL_MMR32_PNODE_SHIFT 15 -#define UV_GLOBAL_MMR64_PNODE_SHIFT 26 - -#define UV_GLOBAL_MMR32_PNODE_BITS(p) ((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT)) - -#define UV_GLOBAL_MMR64_PNODE_BITS(p) \ - ((unsigned long)(p) << UV_GLOBAL_MMR64_PNODE_SHIFT) - -/* - * Macros for converting between kernel virtual addresses, socket local physical - * addresses, and UV global physical addresses. - * Note: use the standard __pa() & __va() macros for converting - * between socket virtual and socket physical addresses. - */ - -/* socket phys RAM --> UV global physical address */ -static inline unsigned long uv_soc_phys_ram_to_gpa(unsigned long paddr) -{ - if (paddr < uv_hub_info->lowmem_remap_top) - paddr += uv_hub_info->lowmem_remap_base; - return paddr | uv_hub_info->gnode_upper; -} - - -/* socket virtual --> UV global physical address */ -static inline unsigned long uv_gpa(void *v) -{ - return __pa(v) | uv_hub_info->gnode_upper; -} - -/* socket virtual --> UV global physical address */ -static inline void *uv_vgpa(void *v) -{ - return (void *)uv_gpa(v); -} - -/* UV global physical address --> socket virtual */ -static inline void *uv_va(unsigned long gpa) -{ - return __va(gpa & uv_hub_info->gpa_mask); -} - -/* pnode, offset --> socket virtual */ -static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset) -{ - return __va(((unsigned long)pnode << uv_hub_info->m_val) | offset); -} - - -/* - * Access global MMRs using the low memory MMR32 space. This region supports - * faster MMR access but not all MMRs are accessible in this space. - */ -static inline unsigned long *uv_global_mmr32_address(int pnode, - unsigned long offset) -{ - return __va(UV_GLOBAL_MMR32_BASE | - UV_GLOBAL_MMR32_PNODE_BITS(pnode) | offset); -} - -static inline void uv_write_global_mmr32(int pnode, unsigned long offset, - unsigned long val) -{ - *uv_global_mmr32_address(pnode, offset) = val; -} - -static inline unsigned long uv_read_global_mmr32(int pnode, - unsigned long offset) -{ - return *uv_global_mmr32_address(pnode, offset); -} - -/* - * Access Global MMR space using the MMR space located at the top of physical - * memory. - */ -static inline unsigned long *uv_global_mmr64_address(int pnode, - unsigned long offset) -{ - return __va(UV_GLOBAL_MMR64_BASE | - UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset); -} - -static inline void uv_write_global_mmr64(int pnode, unsigned long offset, - unsigned long val) -{ - *uv_global_mmr64_address(pnode, offset) = val; -} - -static inline unsigned long uv_read_global_mmr64(int pnode, - unsigned long offset) -{ - return *uv_global_mmr64_address(pnode, offset); -} - -/* - * Access hub local MMRs. Faster than using global space but only local MMRs - * are accessible. - */ -static inline unsigned long *uv_local_mmr_address(unsigned long offset) -{ - return __va(UV_LOCAL_MMR_BASE | offset); -} - -static inline unsigned long uv_read_local_mmr(unsigned long offset) -{ - return *uv_local_mmr_address(offset); -} - -static inline void uv_write_local_mmr(unsigned long offset, unsigned long val) -{ - *uv_local_mmr_address(offset) = val; -} - -/* - * Structures and definitions for converting between cpu, node, pnode, and blade - * numbers. - */ - -/* Blade-local cpu number of current cpu. Numbered 0 .. <# cpus on the blade> */ -static inline int uv_blade_processor_id(void) -{ - return smp_processor_id(); -} - -/* Blade number of current cpu. Numnbered 0 .. <#blades -1> */ -static inline int uv_numa_blade_id(void) -{ - return 0; -} - -/* Convert a cpu number to the the UV blade number */ -static inline int uv_cpu_to_blade_id(int cpu) -{ - return 0; -} - -/* Convert linux node number to the UV blade number */ -static inline int uv_node_to_blade_id(int nid) -{ - return 0; -} - -/* Convert a blade id to the PNODE of the blade */ -static inline int uv_blade_to_pnode(int bid) -{ - return 0; -} - -/* Determine the number of possible cpus on a blade */ -static inline int uv_blade_nr_possible_cpus(int bid) -{ - return num_possible_cpus(); -} - -/* Determine the number of online cpus on a blade */ -static inline int uv_blade_nr_online_cpus(int bid) -{ - return num_online_cpus(); -} - -/* Convert a cpu id to the PNODE of the blade containing the cpu */ -static inline int uv_cpu_to_pnode(int cpu) -{ - return 0; -} - -/* Convert a linux node number to the PNODE of the blade */ -static inline int uv_node_to_pnode(int nid) -{ - return 0; -} - -/* Maximum possible number of blades */ -static inline int uv_num_possible_blades(void) -{ - return 1; -} - -#endif /* __ASM_IA64_UV_HUB__ */ - diff --git a/include/asm-ia64/uv/uv_mmrs.h b/include/asm-ia64/uv/uv_mmrs.h deleted file mode 100644 index c149ef085437..000000000000 --- a/include/asm-ia64/uv/uv_mmrs.h +++ /dev/null @@ -1,673 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * SGI UV MMR definitions - * - * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef __ASM_IA64_UV_MMRS__ -#define __ASM_IA64_UV_MMRS__ - -#define UV_MMR_ENABLE (1UL << 63) - -/* ========================================================================= */ -/* UVH_BAU_DATA_CONFIG */ -/* ========================================================================= */ -#define UVH_BAU_DATA_CONFIG 0x61680UL -#define UVH_BAU_DATA_CONFIG_32 0x0438 - -#define UVH_BAU_DATA_CONFIG_VECTOR_SHFT 0 -#define UVH_BAU_DATA_CONFIG_VECTOR_MASK 0x00000000000000ffUL -#define UVH_BAU_DATA_CONFIG_DM_SHFT 8 -#define UVH_BAU_DATA_CONFIG_DM_MASK 0x0000000000000700UL -#define UVH_BAU_DATA_CONFIG_DESTMODE_SHFT 11 -#define UVH_BAU_DATA_CONFIG_DESTMODE_MASK 0x0000000000000800UL -#define UVH_BAU_DATA_CONFIG_STATUS_SHFT 12 -#define UVH_BAU_DATA_CONFIG_STATUS_MASK 0x0000000000001000UL -#define UVH_BAU_DATA_CONFIG_P_SHFT 13 -#define UVH_BAU_DATA_CONFIG_P_MASK 0x0000000000002000UL -#define UVH_BAU_DATA_CONFIG_T_SHFT 15 -#define UVH_BAU_DATA_CONFIG_T_MASK 0x0000000000008000UL -#define UVH_BAU_DATA_CONFIG_M_SHFT 16 -#define UVH_BAU_DATA_CONFIG_M_MASK 0x0000000000010000UL -#define UVH_BAU_DATA_CONFIG_APIC_ID_SHFT 32 -#define UVH_BAU_DATA_CONFIG_APIC_ID_MASK 0xffffffff00000000UL - -union uvh_bau_data_config_u { - unsigned long v; - struct uvh_bau_data_config_s { - unsigned long vector_ : 8; /* RW */ - unsigned long dm : 3; /* RW */ - unsigned long destmode : 1; /* RW */ - unsigned long status : 1; /* RO */ - unsigned long p : 1; /* RO */ - unsigned long rsvd_14 : 1; /* */ - unsigned long t : 1; /* RO */ - unsigned long m : 1; /* RW */ - unsigned long rsvd_17_31: 15; /* */ - unsigned long apic_id : 32; /* RW */ - } s; -}; - -/* ========================================================================= */ -/* UVH_EVENT_OCCURRED0 */ -/* ========================================================================= */ -#define UVH_EVENT_OCCURRED0 0x70000UL -#define UVH_EVENT_OCCURRED0_32 0x005e8 - -#define UVH_EVENT_OCCURRED0_LB_HCERR_SHFT 0 -#define UVH_EVENT_OCCURRED0_LB_HCERR_MASK 0x0000000000000001UL -#define UVH_EVENT_OCCURRED0_GR0_HCERR_SHFT 1 -#define UVH_EVENT_OCCURRED0_GR0_HCERR_MASK 0x0000000000000002UL -#define UVH_EVENT_OCCURRED0_GR1_HCERR_SHFT 2 -#define UVH_EVENT_OCCURRED0_GR1_HCERR_MASK 0x0000000000000004UL -#define UVH_EVENT_OCCURRED0_LH_HCERR_SHFT 3 -#define UVH_EVENT_OCCURRED0_LH_HCERR_MASK 0x0000000000000008UL -#define UVH_EVENT_OCCURRED0_RH_HCERR_SHFT 4 -#define UVH_EVENT_OCCURRED0_RH_HCERR_MASK 0x0000000000000010UL -#define UVH_EVENT_OCCURRED0_XN_HCERR_SHFT 5 -#define UVH_EVENT_OCCURRED0_XN_HCERR_MASK 0x0000000000000020UL -#define UVH_EVENT_OCCURRED0_SI_HCERR_SHFT 6 -#define UVH_EVENT_OCCURRED0_SI_HCERR_MASK 0x0000000000000040UL -#define UVH_EVENT_OCCURRED0_LB_AOERR0_SHFT 7 -#define UVH_EVENT_OCCURRED0_LB_AOERR0_MASK 0x0000000000000080UL -#define UVH_EVENT_OCCURRED0_GR0_AOERR0_SHFT 8 -#define UVH_EVENT_OCCURRED0_GR0_AOERR0_MASK 0x0000000000000100UL -#define UVH_EVENT_OCCURRED0_GR1_AOERR0_SHFT 9 -#define UVH_EVENT_OCCURRED0_GR1_AOERR0_MASK 0x0000000000000200UL -#define UVH_EVENT_OCCURRED0_LH_AOERR0_SHFT 10 -#define UVH_EVENT_OCCURRED0_LH_AOERR0_MASK 0x0000000000000400UL -#define UVH_EVENT_OCCURRED0_RH_AOERR0_SHFT 11 -#define UVH_EVENT_OCCURRED0_RH_AOERR0_MASK 0x0000000000000800UL -#define UVH_EVENT_OCCURRED0_XN_AOERR0_SHFT 12 -#define UVH_EVENT_OCCURRED0_XN_AOERR0_MASK 0x0000000000001000UL -#define UVH_EVENT_OCCURRED0_SI_AOERR0_SHFT 13 -#define UVH_EVENT_OCCURRED0_SI_AOERR0_MASK 0x0000000000002000UL -#define UVH_EVENT_OCCURRED0_LB_AOERR1_SHFT 14 -#define UVH_EVENT_OCCURRED0_LB_AOERR1_MASK 0x0000000000004000UL -#define UVH_EVENT_OCCURRED0_GR0_AOERR1_SHFT 15 -#define UVH_EVENT_OCCURRED0_GR0_AOERR1_MASK 0x0000000000008000UL -#define UVH_EVENT_OCCURRED0_GR1_AOERR1_SHFT 16 -#define UVH_EVENT_OCCURRED0_GR1_AOERR1_MASK 0x0000000000010000UL -#define UVH_EVENT_OCCURRED0_LH_AOERR1_SHFT 17 -#define UVH_EVENT_OCCURRED0_LH_AOERR1_MASK 0x0000000000020000UL -#define UVH_EVENT_OCCURRED0_RH_AOERR1_SHFT 18 -#define UVH_EVENT_OCCURRED0_RH_AOERR1_MASK 0x0000000000040000UL -#define UVH_EVENT_OCCURRED0_XN_AOERR1_SHFT 19 -#define UVH_EVENT_OCCURRED0_XN_AOERR1_MASK 0x0000000000080000UL -#define UVH_EVENT_OCCURRED0_SI_AOERR1_SHFT 20 -#define UVH_EVENT_OCCURRED0_SI_AOERR1_MASK 0x0000000000100000UL -#define UVH_EVENT_OCCURRED0_RH_VPI_INT_SHFT 21 -#define UVH_EVENT_OCCURRED0_RH_VPI_INT_MASK 0x0000000000200000UL -#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_SHFT 22 -#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_SHFT 23 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_MASK 0x0000000000800000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_SHFT 24 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_MASK 0x0000000001000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_SHFT 25 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_MASK 0x0000000002000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_SHFT 26 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_MASK 0x0000000004000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_SHFT 27 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_MASK 0x0000000008000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_SHFT 28 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_MASK 0x0000000010000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_SHFT 29 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_MASK 0x0000000020000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_SHFT 30 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_MASK 0x0000000040000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_SHFT 31 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_MASK 0x0000000080000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_SHFT 32 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_MASK 0x0000000100000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_SHFT 33 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_MASK 0x0000000200000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_SHFT 34 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_MASK 0x0000000400000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_SHFT 35 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_MASK 0x0000000800000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_SHFT 36 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_MASK 0x0000001000000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_SHFT 37 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_MASK 0x0000002000000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_SHFT 38 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_MASK 0x0000004000000000UL -#define UVH_EVENT_OCCURRED0_L1_NMI_INT_SHFT 39 -#define UVH_EVENT_OCCURRED0_L1_NMI_INT_MASK 0x0000008000000000UL -#define UVH_EVENT_OCCURRED0_STOP_CLOCK_SHFT 40 -#define UVH_EVENT_OCCURRED0_STOP_CLOCK_MASK 0x0000010000000000UL -#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_SHFT 41 -#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_MASK 0x0000020000000000UL -#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_SHFT 42 -#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_MASK 0x0000040000000000UL -#define UVH_EVENT_OCCURRED0_LTC_INT_SHFT 43 -#define UVH_EVENT_OCCURRED0_LTC_INT_MASK 0x0000080000000000UL -#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_SHFT 44 -#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL -#define UVH_EVENT_OCCURRED0_IPI_INT_SHFT 45 -#define UVH_EVENT_OCCURRED0_IPI_INT_MASK 0x0000200000000000UL -#define UVH_EVENT_OCCURRED0_EXTIO_INT0_SHFT 46 -#define UVH_EVENT_OCCURRED0_EXTIO_INT0_MASK 0x0000400000000000UL -#define UVH_EVENT_OCCURRED0_EXTIO_INT1_SHFT 47 -#define UVH_EVENT_OCCURRED0_EXTIO_INT1_MASK 0x0000800000000000UL -#define UVH_EVENT_OCCURRED0_EXTIO_INT2_SHFT 48 -#define UVH_EVENT_OCCURRED0_EXTIO_INT2_MASK 0x0001000000000000UL -#define UVH_EVENT_OCCURRED0_EXTIO_INT3_SHFT 49 -#define UVH_EVENT_OCCURRED0_EXTIO_INT3_MASK 0x0002000000000000UL -#define UVH_EVENT_OCCURRED0_PROFILE_INT_SHFT 50 -#define UVH_EVENT_OCCURRED0_PROFILE_INT_MASK 0x0004000000000000UL -#define UVH_EVENT_OCCURRED0_RTC0_SHFT 51 -#define UVH_EVENT_OCCURRED0_RTC0_MASK 0x0008000000000000UL -#define UVH_EVENT_OCCURRED0_RTC1_SHFT 52 -#define UVH_EVENT_OCCURRED0_RTC1_MASK 0x0010000000000000UL -#define UVH_EVENT_OCCURRED0_RTC2_SHFT 53 -#define UVH_EVENT_OCCURRED0_RTC2_MASK 0x0020000000000000UL -#define UVH_EVENT_OCCURRED0_RTC3_SHFT 54 -#define UVH_EVENT_OCCURRED0_RTC3_MASK 0x0040000000000000UL -#define UVH_EVENT_OCCURRED0_BAU_DATA_SHFT 55 -#define UVH_EVENT_OCCURRED0_BAU_DATA_MASK 0x0080000000000000UL -#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_SHFT 56 -#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_MASK 0x0100000000000000UL -union uvh_event_occurred0_u { - unsigned long v; - struct uvh_event_occurred0_s { - unsigned long lb_hcerr : 1; /* RW, W1C */ - unsigned long gr0_hcerr : 1; /* RW, W1C */ - unsigned long gr1_hcerr : 1; /* RW, W1C */ - unsigned long lh_hcerr : 1; /* RW, W1C */ - unsigned long rh_hcerr : 1; /* RW, W1C */ - unsigned long xn_hcerr : 1; /* RW, W1C */ - unsigned long si_hcerr : 1; /* RW, W1C */ - unsigned long lb_aoerr0 : 1; /* RW, W1C */ - unsigned long gr0_aoerr0 : 1; /* RW, W1C */ - unsigned long gr1_aoerr0 : 1; /* RW, W1C */ - unsigned long lh_aoerr0 : 1; /* RW, W1C */ - unsigned long rh_aoerr0 : 1; /* RW, W1C */ - unsigned long xn_aoerr0 : 1; /* RW, W1C */ - unsigned long si_aoerr0 : 1; /* RW, W1C */ - unsigned long lb_aoerr1 : 1; /* RW, W1C */ - unsigned long gr0_aoerr1 : 1; /* RW, W1C */ - unsigned long gr1_aoerr1 : 1; /* RW, W1C */ - unsigned long lh_aoerr1 : 1; /* RW, W1C */ - unsigned long rh_aoerr1 : 1; /* RW, W1C */ - unsigned long xn_aoerr1 : 1; /* RW, W1C */ - unsigned long si_aoerr1 : 1; /* RW, W1C */ - unsigned long rh_vpi_int : 1; /* RW, W1C */ - unsigned long system_shutdown_int : 1; /* RW, W1C */ - unsigned long lb_irq_int_0 : 1; /* RW, W1C */ - unsigned long lb_irq_int_1 : 1; /* RW, W1C */ - unsigned long lb_irq_int_2 : 1; /* RW, W1C */ - unsigned long lb_irq_int_3 : 1; /* RW, W1C */ - unsigned long lb_irq_int_4 : 1; /* RW, W1C */ - unsigned long lb_irq_int_5 : 1; /* RW, W1C */ - unsigned long lb_irq_int_6 : 1; /* RW, W1C */ - unsigned long lb_irq_int_7 : 1; /* RW, W1C */ - unsigned long lb_irq_int_8 : 1; /* RW, W1C */ - unsigned long lb_irq_int_9 : 1; /* RW, W1C */ - unsigned long lb_irq_int_10 : 1; /* RW, W1C */ - unsigned long lb_irq_int_11 : 1; /* RW, W1C */ - unsigned long lb_irq_int_12 : 1; /* RW, W1C */ - unsigned long lb_irq_int_13 : 1; /* RW, W1C */ - unsigned long lb_irq_int_14 : 1; /* RW, W1C */ - unsigned long lb_irq_int_15 : 1; /* RW, W1C */ - unsigned long l1_nmi_int : 1; /* RW, W1C */ - unsigned long stop_clock : 1; /* RW, W1C */ - unsigned long asic_to_l1 : 1; /* RW, W1C */ - unsigned long l1_to_asic : 1; /* RW, W1C */ - unsigned long ltc_int : 1; /* RW, W1C */ - unsigned long la_seq_trigger : 1; /* RW, W1C */ - unsigned long ipi_int : 1; /* RW, W1C */ - unsigned long extio_int0 : 1; /* RW, W1C */ - unsigned long extio_int1 : 1; /* RW, W1C */ - unsigned long extio_int2 : 1; /* RW, W1C */ - unsigned long extio_int3 : 1; /* RW, W1C */ - unsigned long profile_int : 1; /* RW, W1C */ - unsigned long rtc0 : 1; /* RW, W1C */ - unsigned long rtc1 : 1; /* RW, W1C */ - unsigned long rtc2 : 1; /* RW, W1C */ - unsigned long rtc3 : 1; /* RW, W1C */ - unsigned long bau_data : 1; /* RW, W1C */ - unsigned long power_management_req : 1; /* RW, W1C */ - unsigned long rsvd_57_63 : 7; /* */ - } s; -}; - -/* ========================================================================= */ -/* UVH_EVENT_OCCURRED0_ALIAS */ -/* ========================================================================= */ -#define UVH_EVENT_OCCURRED0_ALIAS 0x0000000000070008UL -#define UVH_EVENT_OCCURRED0_ALIAS_32 0x005f0 - -/* ========================================================================= */ -/* UVH_INT_CMPB */ -/* ========================================================================= */ -#define UVH_INT_CMPB 0x22080UL - -#define UVH_INT_CMPB_REAL_TIME_CMPB_SHFT 0 -#define UVH_INT_CMPB_REAL_TIME_CMPB_MASK 0x00ffffffffffffffUL - -union uvh_int_cmpb_u { - unsigned long v; - struct uvh_int_cmpb_s { - unsigned long real_time_cmpb : 56; /* RW */ - unsigned long rsvd_56_63 : 8; /* */ - } s; -}; - -/* ========================================================================= */ -/* UVH_INT_CMPC */ -/* ========================================================================= */ -#define UVH_INT_CMPC 0x22100UL - -#define UVH_INT_CMPC_REAL_TIME_CMPC_SHFT 0 -#define UVH_INT_CMPC_REAL_TIME_CMPC_MASK 0x00ffffffffffffffUL - -union uvh_int_cmpc_u { - unsigned long v; - struct uvh_int_cmpc_s { - unsigned long real_time_cmpc : 56; /* RW */ - unsigned long rsvd_56_63 : 8; /* */ - } s; -}; - -/* ========================================================================= */ -/* UVH_INT_CMPD */ -/* ========================================================================= */ -#define UVH_INT_CMPD 0x22180UL - -#define UVH_INT_CMPD_REAL_TIME_CMPD_SHFT 0 -#define UVH_INT_CMPD_REAL_TIME_CMPD_MASK 0x00ffffffffffffffUL - -union uvh_int_cmpd_u { - unsigned long v; - struct uvh_int_cmpd_s { - unsigned long real_time_cmpd : 56; /* RW */ - unsigned long rsvd_56_63 : 8; /* */ - } s; -}; - -/* ========================================================================= */ -/* UVH_NODE_ID */ -/* ========================================================================= */ -#define UVH_NODE_ID 0x0UL - -#define UVH_NODE_ID_FORCE1_SHFT 0 -#define UVH_NODE_ID_FORCE1_MASK 0x0000000000000001UL -#define UVH_NODE_ID_MANUFACTURER_SHFT 1 -#define UVH_NODE_ID_MANUFACTURER_MASK 0x0000000000000ffeUL -#define UVH_NODE_ID_PART_NUMBER_SHFT 12 -#define UVH_NODE_ID_PART_NUMBER_MASK 0x000000000ffff000UL -#define UVH_NODE_ID_REVISION_SHFT 28 -#define UVH_NODE_ID_REVISION_MASK 0x00000000f0000000UL -#define UVH_NODE_ID_NODE_ID_SHFT 32 -#define UVH_NODE_ID_NODE_ID_MASK 0x00007fff00000000UL -#define UVH_NODE_ID_NODES_PER_BIT_SHFT 48 -#define UVH_NODE_ID_NODES_PER_BIT_MASK 0x007f000000000000UL -#define UVH_NODE_ID_NI_PORT_SHFT 56 -#define UVH_NODE_ID_NI_PORT_MASK 0x0f00000000000000UL - -union uvh_node_id_u { - unsigned long v; - struct uvh_node_id_s { - unsigned long force1 : 1; /* RO */ - unsigned long manufacturer : 11; /* RO */ - unsigned long part_number : 16; /* RO */ - unsigned long revision : 4; /* RO */ - unsigned long node_id : 15; /* RW */ - unsigned long rsvd_47 : 1; /* */ - unsigned long nodes_per_bit : 7; /* RW */ - unsigned long rsvd_55 : 1; /* */ - unsigned long ni_port : 4; /* RO */ - unsigned long rsvd_60_63 : 4; /* */ - } s; -}; - -/* ========================================================================= */ -/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR */ -/* ========================================================================= */ -#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL - -#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24 -#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL - -union uvh_rh_gam_alias210_redirect_config_0_mmr_u { - unsigned long v; - struct uvh_rh_gam_alias210_redirect_config_0_mmr_s { - unsigned long rsvd_0_23 : 24; /* */ - unsigned long dest_base : 22; /* RW */ - unsigned long rsvd_46_63: 18; /* */ - } s; -}; - -/* ========================================================================= */ -/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR */ -/* ========================================================================= */ -#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL - -#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24 -#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL - -union uvh_rh_gam_alias210_redirect_config_1_mmr_u { - unsigned long v; - struct uvh_rh_gam_alias210_redirect_config_1_mmr_s { - unsigned long rsvd_0_23 : 24; /* */ - unsigned long dest_base : 22; /* RW */ - unsigned long rsvd_46_63: 18; /* */ - } s; -}; - -/* ========================================================================= */ -/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR */ -/* ========================================================================= */ -#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL - -#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24 -#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL - -union uvh_rh_gam_alias210_redirect_config_2_mmr_u { - unsigned long v; - struct uvh_rh_gam_alias210_redirect_config_2_mmr_s { - unsigned long rsvd_0_23 : 24; /* */ - unsigned long dest_base : 22; /* RW */ - unsigned long rsvd_46_63: 18; /* */ - } s; -}; - -/* ========================================================================= */ -/* UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR */ -/* ========================================================================= */ -#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL - -#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28 -#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL -#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT 48 -#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_MASK 0x0001000000000000UL -#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52 -#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL -#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63 -#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL - -union uvh_rh_gam_gru_overlay_config_mmr_u { - unsigned long v; - struct uvh_rh_gam_gru_overlay_config_mmr_s { - unsigned long rsvd_0_27: 28; /* */ - unsigned long base : 18; /* RW */ - unsigned long rsvd_46_47: 2; /* */ - unsigned long gr4 : 1; /* RW */ - unsigned long rsvd_49_51: 3; /* */ - unsigned long n_gru : 4; /* RW */ - unsigned long rsvd_56_62: 7; /* */ - unsigned long enable : 1; /* RW */ - } s; -}; - -/* ========================================================================= */ -/* UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR */ -/* ========================================================================= */ -#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL - -#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26 -#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL -#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_SHFT 46 -#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_MASK 0x0000400000000000UL -#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63 -#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL - -union uvh_rh_gam_mmr_overlay_config_mmr_u { - unsigned long v; - struct uvh_rh_gam_mmr_overlay_config_mmr_s { - unsigned long rsvd_0_25: 26; /* */ - unsigned long base : 20; /* RW */ - unsigned long dual_hub : 1; /* RW */ - unsigned long rsvd_47_62: 16; /* */ - unsigned long enable : 1; /* RW */ - } s; -}; - -/* ========================================================================= */ -/* UVH_RTC */ -/* ========================================================================= */ -#define UVH_RTC 0x340000UL - -#define UVH_RTC_REAL_TIME_CLOCK_SHFT 0 -#define UVH_RTC_REAL_TIME_CLOCK_MASK 0x00ffffffffffffffUL - -union uvh_rtc_u { - unsigned long v; - struct uvh_rtc_s { - unsigned long real_time_clock : 56; /* RW */ - unsigned long rsvd_56_63 : 8; /* */ - } s; -}; - -/* ========================================================================= */ -/* UVH_RTC1_INT_CONFIG */ -/* ========================================================================= */ -#define UVH_RTC1_INT_CONFIG 0x615c0UL - -#define UVH_RTC1_INT_CONFIG_VECTOR_SHFT 0 -#define UVH_RTC1_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL -#define UVH_RTC1_INT_CONFIG_DM_SHFT 8 -#define UVH_RTC1_INT_CONFIG_DM_MASK 0x0000000000000700UL -#define UVH_RTC1_INT_CONFIG_DESTMODE_SHFT 11 -#define UVH_RTC1_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL -#define UVH_RTC1_INT_CONFIG_STATUS_SHFT 12 -#define UVH_RTC1_INT_CONFIG_STATUS_MASK 0x0000000000001000UL -#define UVH_RTC1_INT_CONFIG_P_SHFT 13 -#define UVH_RTC1_INT_CONFIG_P_MASK 0x0000000000002000UL -#define UVH_RTC1_INT_CONFIG_T_SHFT 15 -#define UVH_RTC1_INT_CONFIG_T_MASK 0x0000000000008000UL -#define UVH_RTC1_INT_CONFIG_M_SHFT 16 -#define UVH_RTC1_INT_CONFIG_M_MASK 0x0000000000010000UL -#define UVH_RTC1_INT_CONFIG_APIC_ID_SHFT 32 -#define UVH_RTC1_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL - -union uvh_rtc1_int_config_u { - unsigned long v; - struct uvh_rtc1_int_config_s { - unsigned long vector_ : 8; /* RW */ - unsigned long dm : 3; /* RW */ - unsigned long destmode : 1; /* RW */ - unsigned long status : 1; /* RO */ - unsigned long p : 1; /* RO */ - unsigned long rsvd_14 : 1; /* */ - unsigned long t : 1; /* RO */ - unsigned long m : 1; /* RW */ - unsigned long rsvd_17_31: 15; /* */ - unsigned long apic_id : 32; /* RW */ - } s; -}; - -/* ========================================================================= */ -/* UVH_RTC2_INT_CONFIG */ -/* ========================================================================= */ -#define UVH_RTC2_INT_CONFIG 0x61600UL - -#define UVH_RTC2_INT_CONFIG_VECTOR_SHFT 0 -#define UVH_RTC2_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL -#define UVH_RTC2_INT_CONFIG_DM_SHFT 8 -#define UVH_RTC2_INT_CONFIG_DM_MASK 0x0000000000000700UL -#define UVH_RTC2_INT_CONFIG_DESTMODE_SHFT 11 -#define UVH_RTC2_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL -#define UVH_RTC2_INT_CONFIG_STATUS_SHFT 12 -#define UVH_RTC2_INT_CONFIG_STATUS_MASK 0x0000000000001000UL -#define UVH_RTC2_INT_CONFIG_P_SHFT 13 -#define UVH_RTC2_INT_CONFIG_P_MASK 0x0000000000002000UL -#define UVH_RTC2_INT_CONFIG_T_SHFT 15 -#define UVH_RTC2_INT_CONFIG_T_MASK 0x0000000000008000UL -#define UVH_RTC2_INT_CONFIG_M_SHFT 16 -#define UVH_RTC2_INT_CONFIG_M_MASK 0x0000000000010000UL -#define UVH_RTC2_INT_CONFIG_APIC_ID_SHFT 32 -#define UVH_RTC2_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL - -union uvh_rtc2_int_config_u { - unsigned long v; - struct uvh_rtc2_int_config_s { - unsigned long vector_ : 8; /* RW */ - unsigned long dm : 3; /* RW */ - unsigned long destmode : 1; /* RW */ - unsigned long status : 1; /* RO */ - unsigned long p : 1; /* RO */ - unsigned long rsvd_14 : 1; /* */ - unsigned long t : 1; /* RO */ - unsigned long m : 1; /* RW */ - unsigned long rsvd_17_31: 15; /* */ - unsigned long apic_id : 32; /* RW */ - } s; -}; - -/* ========================================================================= */ -/* UVH_RTC3_INT_CONFIG */ -/* ========================================================================= */ -#define UVH_RTC3_INT_CONFIG 0x61640UL - -#define UVH_RTC3_INT_CONFIG_VECTOR_SHFT 0 -#define UVH_RTC3_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL -#define UVH_RTC3_INT_CONFIG_DM_SHFT 8 -#define UVH_RTC3_INT_CONFIG_DM_MASK 0x0000000000000700UL -#define UVH_RTC3_INT_CONFIG_DESTMODE_SHFT 11 -#define UVH_RTC3_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL -#define UVH_RTC3_INT_CONFIG_STATUS_SHFT 12 -#define UVH_RTC3_INT_CONFIG_STATUS_MASK 0x0000000000001000UL -#define UVH_RTC3_INT_CONFIG_P_SHFT 13 -#define UVH_RTC3_INT_CONFIG_P_MASK 0x0000000000002000UL -#define UVH_RTC3_INT_CONFIG_T_SHFT 15 -#define UVH_RTC3_INT_CONFIG_T_MASK 0x0000000000008000UL -#define UVH_RTC3_INT_CONFIG_M_SHFT 16 -#define UVH_RTC3_INT_CONFIG_M_MASK 0x0000000000010000UL -#define UVH_RTC3_INT_CONFIG_APIC_ID_SHFT 32 -#define UVH_RTC3_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL - -union uvh_rtc3_int_config_u { - unsigned long v; - struct uvh_rtc3_int_config_s { - unsigned long vector_ : 8; /* RW */ - unsigned long dm : 3; /* RW */ - unsigned long destmode : 1; /* RW */ - unsigned long status : 1; /* RO */ - unsigned long p : 1; /* RO */ - unsigned long rsvd_14 : 1; /* */ - unsigned long t : 1; /* RO */ - unsigned long m : 1; /* RW */ - unsigned long rsvd_17_31: 15; /* */ - unsigned long apic_id : 32; /* RW */ - } s; -}; - -/* ========================================================================= */ -/* UVH_RTC_INC_RATIO */ -/* ========================================================================= */ -#define UVH_RTC_INC_RATIO 0x350000UL - -#define UVH_RTC_INC_RATIO_FRACTION_SHFT 0 -#define UVH_RTC_INC_RATIO_FRACTION_MASK 0x00000000000fffffUL -#define UVH_RTC_INC_RATIO_RATIO_SHFT 20 -#define UVH_RTC_INC_RATIO_RATIO_MASK 0x0000000000700000UL - -union uvh_rtc_inc_ratio_u { - unsigned long v; - struct uvh_rtc_inc_ratio_s { - unsigned long fraction : 20; /* RW */ - unsigned long ratio : 3; /* RW */ - unsigned long rsvd_23_63: 41; /* */ - } s; -}; - -/* ========================================================================= */ -/* UVH_SI_ADDR_MAP_CONFIG */ -/* ========================================================================= */ -#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL - -#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0 -#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL -#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8 -#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL - -union uvh_si_addr_map_config_u { - unsigned long v; - struct uvh_si_addr_map_config_s { - unsigned long m_skt : 6; /* RW */ - unsigned long rsvd_6_7: 2; /* */ - unsigned long n_skt : 4; /* RW */ - unsigned long rsvd_12_63: 52; /* */ - } s; -}; - -/* ========================================================================= */ -/* UVH_SI_ALIAS0_OVERLAY_CONFIG */ -/* ========================================================================= */ -#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL - -#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24 -#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL -#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48 -#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL -#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63 -#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL - -union uvh_si_alias0_overlay_config_u { - unsigned long v; - struct uvh_si_alias0_overlay_config_s { - unsigned long rsvd_0_23: 24; /* */ - unsigned long base : 8; /* RW */ - unsigned long rsvd_32_47: 16; /* */ - unsigned long m_alias : 5; /* RW */ - unsigned long rsvd_53_62: 10; /* */ - unsigned long enable : 1; /* RW */ - } s; -}; - -/* ========================================================================= */ -/* UVH_SI_ALIAS1_OVERLAY_CONFIG */ -/* ========================================================================= */ -#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL - -#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24 -#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL -#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48 -#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL -#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63 -#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL - -union uvh_si_alias1_overlay_config_u { - unsigned long v; - struct uvh_si_alias1_overlay_config_s { - unsigned long rsvd_0_23: 24; /* */ - unsigned long base : 8; /* RW */ - unsigned long rsvd_32_47: 16; /* */ - unsigned long m_alias : 5; /* RW */ - unsigned long rsvd_53_62: 10; /* */ - unsigned long enable : 1; /* RW */ - } s; -}; - -/* ========================================================================= */ -/* UVH_SI_ALIAS2_OVERLAY_CONFIG */ -/* ========================================================================= */ -#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL - -#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24 -#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL -#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48 -#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL -#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63 -#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL - -union uvh_si_alias2_overlay_config_u { - unsigned long v; - struct uvh_si_alias2_overlay_config_s { - unsigned long rsvd_0_23: 24; /* */ - unsigned long base : 8; /* RW */ - unsigned long rsvd_32_47: 16; /* */ - unsigned long m_alias : 5; /* RW */ - unsigned long rsvd_53_62: 10; /* */ - unsigned long enable : 1; /* RW */ - } s; -}; - - -#endif /* __ASM_IA64_UV_MMRS__ */ diff --git a/include/asm-ia64/vga.h b/include/asm-ia64/vga.h deleted file mode 100644 index 02184ecd8208..000000000000 --- a/include/asm-ia64/vga.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Access to VGA videoram - * - * (c) 1998 Martin Mares - * (c) 1999 Asit Mallick - * (c) 1999 Don Dugger - */ - -#ifndef __ASM_IA64_VGA_H_ -#define __ASM_IA64_VGA_H_ - -/* - * On the PC, we can just recalculate addresses and then access the - * videoram directly without any black magic. - */ - -extern unsigned long vga_console_iobase; -extern unsigned long vga_console_membase; - -#define VGA_MAP_MEM(x,s) ((unsigned long) ioremap_nocache(vga_console_membase + (x), s)) - -#define vga_readb(x) (*(x)) -#define vga_writeb(x,y) (*(y) = (x)) - -#endif /* __ASM_IA64_VGA_H_ */ diff --git a/include/asm-ia64/xor.h b/include/asm-ia64/xor.h deleted file mode 100644 index 41fb8744d17a..000000000000 --- a/include/asm-ia64/xor.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-ia64/xor.h - * - * Optimized RAID-5 checksumming functions for IA-64. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * You should have received a copy of the GNU General Public License - * (for example /usr/src/linux/COPYING); if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - - -extern void xor_ia64_2(unsigned long, unsigned long *, unsigned long *); -extern void xor_ia64_3(unsigned long, unsigned long *, unsigned long *, - unsigned long *); -extern void xor_ia64_4(unsigned long, unsigned long *, unsigned long *, - unsigned long *, unsigned long *); -extern void xor_ia64_5(unsigned long, unsigned long *, unsigned long *, - unsigned long *, unsigned long *, unsigned long *); - -static struct xor_block_template xor_block_ia64 = { - .name = "ia64", - .do_2 = xor_ia64_2, - .do_3 = xor_ia64_3, - .do_4 = xor_ia64_4, - .do_5 = xor_ia64_5, -}; - -#define XOR_TRY_TEMPLATES xor_speed(&xor_block_ia64) -- cgit v1.2.3 From 66b8bd3c405389213de1d6ba6c2565990f62004f Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 1 Aug 2008 17:54:32 +0000 Subject: [CIFS] properly account for new user= field in SPNEGO upcall string allocation ...it doesn't look like it's being accounted for at the moment. Also try to reorganize the calculation to make it a little more evident what each piece means. This should probably go to the stable series as well... Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_spnego.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c index 7013aaff6aed..2434ab0e8791 100644 --- a/fs/cifs/cifs_spnego.c +++ b/fs/cifs/cifs_spnego.c @@ -66,8 +66,8 @@ struct key_type cifs_spnego_key_type = { .describe = user_describe, }; -#define MAX_VER_STR_LEN 9 /* length of longest version string e.g. - strlen(";ver=0xFF") */ +#define MAX_VER_STR_LEN 8 /* length of longest version string e.g. + strlen("ver=0xFF") */ #define MAX_MECH_STR_LEN 13 /* length of longest security mechanism name, eg in future could have strlen(";sec=ntlmsspi") */ #define MAX_IPV6_ADDR_LEN 42 /* eg FEDC:BA98:7654:3210:FEDC:BA98:7654:3210/60 */ @@ -81,11 +81,15 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo) struct key *spnego_key; const char *hostname = server->hostname; - /* BB: come up with better scheme for determining length */ - /* length of fields (with semicolons): ver=0xyz ipv4= ipaddress host= - hostname sec=mechanism uid=0x uid */ - desc_len = MAX_VER_STR_LEN + 5 + MAX_IPV6_ADDR_LEN + 1 + 6 + - strlen(hostname) + MAX_MECH_STR_LEN + 8 + (sizeof(uid_t) * 2); + /* length of fields (with semicolons): ver=0xyz ip4=ipaddress + host=hostname sec=mechanism uid=0xFF user=username */ + desc_len = MAX_VER_STR_LEN + + 6 /* len of "host=" */ + strlen(hostname) + + 5 /* len of ";ipv4=" */ + MAX_IPV6_ADDR_LEN + + MAX_MECH_STR_LEN + + 7 /* len of ";uid=0x" */ + (sizeof(uid_t) * 2) + + 6 /* len of ";user=" */ + strlen(sesInfo->userName) + 1; + spnego_key = ERR_PTR(-ENOMEM); description = kzalloc(desc_len, GFP_KERNEL); if (description == NULL) -- cgit v1.2.3 From 6c5e0c4d518a37e1d5d794c14433e80284415079 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 1 Aug 2008 20:31:32 +0200 Subject: block: add a blk_plug_device_unlocked() that grabs the queue lock blk_plug_device() must be called with the queue lock held, so callers often just grab and release the lock for that purpose. Add a helper that does just that. Signed-off-by: Jens Axboe --- block/blk-core.c | 18 ++++++++++++++++++ include/linux/blkdev.h | 1 + 2 files changed, 19 insertions(+) diff --git a/block/blk-core.c b/block/blk-core.c index fef79ccb2a11..4889eb86a39e 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -212,6 +212,24 @@ void blk_plug_device(struct request_queue *q) } EXPORT_SYMBOL(blk_plug_device); +/** + * blk_plug_device_unlocked - plug a device without queue lock held + * @q: The &struct request_queue to plug + * + * Description: + * Like @blk_plug_device(), but grabs the queue lock and disables + * interrupts. + **/ +void blk_plug_device_unlocked(struct request_queue *q) +{ + unsigned long flags; + + spin_lock_irqsave(q->queue_lock, flags); + blk_plug_device(q); + spin_unlock_irqrestore(q->queue_lock, flags); +} +EXPORT_SYMBOL(blk_plug_device_unlocked); + /* * remove the queue from the plugged list, if present. called with * queue lock held and interrupts disabled. diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 88d68081a0f1..e61f22be4d0e 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -655,6 +655,7 @@ extern struct request *blk_get_request(struct request_queue *, int, gfp_t); extern void blk_insert_request(struct request_queue *, struct request *, int, void *); extern void blk_requeue_request(struct request_queue *, struct request *); extern void blk_plug_device(struct request_queue *); +extern void blk_plug_device_unlocked(struct request_queue *); extern int blk_remove_plug(struct request_queue *); extern void blk_recount_segments(struct request_queue *, struct bio *); extern int scsi_cmd_ioctl(struct file *, struct request_queue *, -- cgit v1.2.3 From 93769f58078e2a066b56217cae1e343ac5a6b78c Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 1 Aug 2008 20:32:31 +0200 Subject: md: the bitmap code needs to use blk_plug_device_unlocked() It doesn't hold the queue lock, so it's both racey on the queue flags and thus spews a warning. Signed-off-by: Jens Axboe --- drivers/md/bitmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 621a272a2c74..7e65bad522cb 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1234,7 +1234,7 @@ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sect case 0: bitmap_file_set_bit(bitmap, offset); bitmap_count_page(bitmap,offset, 1); - blk_plug_device(bitmap->mddev->queue); + blk_plug_device_unlocked(bitmap->mddev->queue); /* fall through */ case 1: *bmc = 2; -- cgit v1.2.3 From c6557e7f2b6ae76a44653d38f835174074c42e05 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 1 Aug 2008 20:42:05 +0200 Subject: [S390] move include/asm-s390 to arch/s390/include/asm Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/Kbuild | 15 + arch/s390/include/asm/airq.h | 19 + arch/s390/include/asm/appldata.h | 90 +++ arch/s390/include/asm/atomic.h | 285 ++++++++ arch/s390/include/asm/auxvec.h | 4 + arch/s390/include/asm/bitops.h | 884 +++++++++++++++++++++++ arch/s390/include/asm/bug.h | 70 ++ arch/s390/include/asm/bugs.h | 22 + arch/s390/include/asm/byteorder.h | 125 ++++ arch/s390/include/asm/cache.h | 19 + arch/s390/include/asm/cacheflush.h | 31 + arch/s390/include/asm/ccwdev.h | 192 +++++ arch/s390/include/asm/ccwgroup.h | 69 ++ arch/s390/include/asm/checksum.h | 166 +++++ arch/s390/include/asm/chpid.h | 56 ++ arch/s390/include/asm/chsc.h | 127 ++++ arch/s390/include/asm/cio.h | 514 ++++++++++++++ arch/s390/include/asm/cmb.h | 58 ++ arch/s390/include/asm/compat.h | 233 ++++++ arch/s390/include/asm/cpcmd.h | 34 + arch/s390/include/asm/cpu.h | 33 + arch/s390/include/asm/cputime.h | 177 +++++ arch/s390/include/asm/current.h | 23 + arch/s390/include/asm/dasd.h | 270 +++++++ arch/s390/include/asm/debug.h | 261 +++++++ arch/s390/include/asm/delay.h | 22 + arch/s390/include/asm/device.h | 7 + arch/s390/include/asm/diag.h | 39 + arch/s390/include/asm/div64.h | 1 + arch/s390/include/asm/dma.h | 16 + arch/s390/include/asm/ebcdic.h | 49 ++ arch/s390/include/asm/elf.h | 196 ++++++ arch/s390/include/asm/emergency-restart.h | 6 + arch/s390/include/asm/errno.h | 13 + arch/s390/include/asm/etr.h | 258 +++++++ arch/s390/include/asm/extmem.h | 33 + arch/s390/include/asm/fb.h | 12 + arch/s390/include/asm/fcntl.h | 1 + arch/s390/include/asm/fcx.h | 311 ++++++++ arch/s390/include/asm/futex.h | 52 ++ arch/s390/include/asm/hardirq.h | 51 ++ arch/s390/include/asm/hugetlb.h | 184 +++++ arch/s390/include/asm/idals.h | 256 +++++++ arch/s390/include/asm/io.h | 54 ++ arch/s390/include/asm/ioctl.h | 1 + arch/s390/include/asm/ioctls.h | 92 +++ arch/s390/include/asm/ipcbuf.h | 31 + arch/s390/include/asm/ipl.h | 168 +++++ arch/s390/include/asm/irq.h | 23 + arch/s390/include/asm/irq_regs.h | 1 + arch/s390/include/asm/irqflags.h | 106 +++ arch/s390/include/asm/isc.h | 25 + arch/s390/include/asm/itcw.h | 30 + arch/s390/include/asm/kdebug.h | 27 + arch/s390/include/asm/kexec.h | 43 ++ arch/s390/include/asm/kmap_types.h | 23 + arch/s390/include/asm/kprobes.h | 103 +++ arch/s390/include/asm/kvm.h | 45 ++ arch/s390/include/asm/kvm_host.h | 235 +++++++ arch/s390/include/asm/kvm_para.h | 150 ++++ arch/s390/include/asm/kvm_virtio.h | 63 ++ arch/s390/include/asm/linkage.h | 6 + arch/s390/include/asm/local.h | 1 + arch/s390/include/asm/lowcore.h | 433 ++++++++++++ arch/s390/include/asm/mathemu.h | 29 + arch/s390/include/asm/mman.h | 25 + arch/s390/include/asm/mmu.h | 13 + arch/s390/include/asm/mmu_context.h | 77 ++ arch/s390/include/asm/module.h | 46 ++ arch/s390/include/asm/monwriter.h | 33 + arch/s390/include/asm/msgbuf.h | 37 + arch/s390/include/asm/mutex.h | 9 + arch/s390/include/asm/page.h | 155 ++++ arch/s390/include/asm/param.h | 30 + arch/s390/include/asm/pci.h | 10 + arch/s390/include/asm/percpu.h | 37 + arch/s390/include/asm/pgalloc.h | 174 +++++ arch/s390/include/asm/pgtable.h | 1093 +++++++++++++++++++++++++++++ arch/s390/include/asm/poll.h | 1 + arch/s390/include/asm/posix_types.h | 111 +++ arch/s390/include/asm/processor.h | 360 ++++++++++ arch/s390/include/asm/ptrace.h | 499 +++++++++++++ arch/s390/include/asm/qdio.h | 382 ++++++++++ arch/s390/include/asm/qeth.h | 78 ++ arch/s390/include/asm/reset.h | 21 + arch/s390/include/asm/resource.h | 15 + arch/s390/include/asm/rwsem.h | 387 ++++++++++ arch/s390/include/asm/s390_ext.h | 32 + arch/s390/include/asm/s390_rdev.h | 15 + arch/s390/include/asm/scatterlist.h | 19 + arch/s390/include/asm/schid.h | 32 + arch/s390/include/asm/sclp.h | 58 ++ arch/s390/include/asm/sections.h | 8 + arch/s390/include/asm/segment.h | 4 + arch/s390/include/asm/sembuf.h | 29 + arch/s390/include/asm/setup.h | 140 ++++ arch/s390/include/asm/sfp-machine.h | 142 ++++ arch/s390/include/asm/sfp-util.h | 77 ++ arch/s390/include/asm/shmbuf.h | 48 ++ arch/s390/include/asm/shmparam.h | 13 + arch/s390/include/asm/sigcontext.h | 71 ++ arch/s390/include/asm/siginfo.h | 18 + arch/s390/include/asm/signal.h | 172 +++++ arch/s390/include/asm/sigp.h | 126 ++++ arch/s390/include/asm/smp.h | 116 +++ arch/s390/include/asm/socket.h | 65 ++ arch/s390/include/asm/sockios.h | 21 + arch/s390/include/asm/sparsemem.h | 18 + arch/s390/include/asm/spinlock.h | 178 +++++ arch/s390/include/asm/spinlock_types.h | 20 + arch/s390/include/asm/stat.h | 105 +++ arch/s390/include/asm/statfs.h | 71 ++ arch/s390/include/asm/string.h | 143 ++++ arch/s390/include/asm/suspend.h | 5 + arch/s390/include/asm/sysinfo.h | 121 ++++ arch/s390/include/asm/system.h | 462 ++++++++++++ arch/s390/include/asm/tape390.h | 103 +++ arch/s390/include/asm/termbits.h | 206 ++++++ arch/s390/include/asm/termios.h | 67 ++ arch/s390/include/asm/thread_info.h | 118 ++++ arch/s390/include/asm/timer.h | 65 ++ arch/s390/include/asm/timex.h | 88 +++ arch/s390/include/asm/tlb.h | 156 ++++ arch/s390/include/asm/tlbflush.h | 140 ++++ arch/s390/include/asm/todclk.h | 23 + arch/s390/include/asm/topology.h | 33 + arch/s390/include/asm/types.h | 63 ++ arch/s390/include/asm/uaccess.h | 363 ++++++++++ arch/s390/include/asm/ucontext.h | 20 + arch/s390/include/asm/unaligned.h | 13 + arch/s390/include/asm/unistd.h | 411 +++++++++++ arch/s390/include/asm/user.h | 76 ++ arch/s390/include/asm/vtoc.h | 203 ++++++ arch/s390/include/asm/xor.h | 1 + arch/s390/include/asm/zcrypt.h | 276 ++++++++ include/asm-s390/Kbuild | 15 - include/asm-s390/airq.h | 19 - include/asm-s390/appldata.h | 90 --- include/asm-s390/atomic.h | 285 -------- include/asm-s390/auxvec.h | 4 - include/asm-s390/bitops.h | 884 ----------------------- include/asm-s390/bug.h | 70 -- include/asm-s390/bugs.h | 22 - include/asm-s390/byteorder.h | 125 ---- include/asm-s390/cache.h | 19 - include/asm-s390/cacheflush.h | 31 - include/asm-s390/ccwdev.h | 192 ----- include/asm-s390/ccwgroup.h | 69 -- include/asm-s390/checksum.h | 166 ----- include/asm-s390/chpid.h | 56 -- include/asm-s390/chsc.h | 127 ---- include/asm-s390/cio.h | 514 -------------- include/asm-s390/cmb.h | 58 -- include/asm-s390/compat.h | 233 ------ include/asm-s390/cpcmd.h | 34 - include/asm-s390/cpu.h | 33 - include/asm-s390/cputime.h | 177 ----- include/asm-s390/current.h | 23 - include/asm-s390/dasd.h | 270 ------- include/asm-s390/debug.h | 261 ------- include/asm-s390/delay.h | 22 - include/asm-s390/device.h | 7 - include/asm-s390/diag.h | 39 - include/asm-s390/div64.h | 1 - include/asm-s390/dma.h | 16 - include/asm-s390/ebcdic.h | 49 -- include/asm-s390/elf.h | 196 ------ include/asm-s390/emergency-restart.h | 6 - include/asm-s390/errno.h | 13 - include/asm-s390/etr.h | 258 ------- include/asm-s390/extmem.h | 33 - include/asm-s390/fb.h | 12 - include/asm-s390/fcntl.h | 1 - include/asm-s390/fcx.h | 311 -------- include/asm-s390/futex.h | 52 -- include/asm-s390/hardirq.h | 51 -- include/asm-s390/hugetlb.h | 184 ----- include/asm-s390/idals.h | 256 ------- include/asm-s390/io.h | 54 -- include/asm-s390/ioctl.h | 1 - include/asm-s390/ioctls.h | 92 --- include/asm-s390/ipcbuf.h | 31 - include/asm-s390/ipl.h | 168 ----- include/asm-s390/irq.h | 23 - include/asm-s390/irq_regs.h | 1 - include/asm-s390/irqflags.h | 106 --- include/asm-s390/isc.h | 25 - include/asm-s390/itcw.h | 30 - include/asm-s390/kdebug.h | 27 - include/asm-s390/kexec.h | 43 -- include/asm-s390/kmap_types.h | 23 - include/asm-s390/kprobes.h | 103 --- include/asm-s390/kvm.h | 45 -- include/asm-s390/kvm_host.h | 235 ------- include/asm-s390/kvm_para.h | 150 ---- include/asm-s390/kvm_virtio.h | 63 -- include/asm-s390/linkage.h | 6 - include/asm-s390/local.h | 1 - include/asm-s390/lowcore.h | 433 ------------ include/asm-s390/mathemu.h | 29 - include/asm-s390/mman.h | 25 - include/asm-s390/mmu.h | 13 - include/asm-s390/mmu_context.h | 77 -- include/asm-s390/module.h | 46 -- include/asm-s390/monwriter.h | 33 - include/asm-s390/msgbuf.h | 37 - include/asm-s390/mutex.h | 9 - include/asm-s390/page.h | 155 ---- include/asm-s390/param.h | 30 - include/asm-s390/pci.h | 10 - include/asm-s390/percpu.h | 37 - include/asm-s390/pgalloc.h | 174 ----- include/asm-s390/pgtable.h | 1093 ----------------------------- include/asm-s390/poll.h | 1 - include/asm-s390/posix_types.h | 111 --- include/asm-s390/processor.h | 360 ---------- include/asm-s390/ptrace.h | 499 ------------- include/asm-s390/qdio.h | 382 ---------- include/asm-s390/qeth.h | 78 -- include/asm-s390/reset.h | 21 - include/asm-s390/resource.h | 15 - include/asm-s390/rwsem.h | 387 ---------- include/asm-s390/s390_ext.h | 32 - include/asm-s390/s390_rdev.h | 15 - include/asm-s390/scatterlist.h | 19 - include/asm-s390/schid.h | 32 - include/asm-s390/sclp.h | 58 -- include/asm-s390/sections.h | 8 - include/asm-s390/segment.h | 4 - include/asm-s390/sembuf.h | 29 - include/asm-s390/setup.h | 140 ---- include/asm-s390/sfp-machine.h | 142 ---- include/asm-s390/sfp-util.h | 77 -- include/asm-s390/shmbuf.h | 48 -- include/asm-s390/shmparam.h | 13 - include/asm-s390/sigcontext.h | 71 -- include/asm-s390/siginfo.h | 18 - include/asm-s390/signal.h | 172 ----- include/asm-s390/sigp.h | 126 ---- include/asm-s390/smp.h | 116 --- include/asm-s390/socket.h | 65 -- include/asm-s390/sockios.h | 21 - include/asm-s390/sparsemem.h | 18 - include/asm-s390/spinlock.h | 178 ----- include/asm-s390/spinlock_types.h | 20 - include/asm-s390/stat.h | 105 --- include/asm-s390/statfs.h | 71 -- include/asm-s390/string.h | 143 ---- include/asm-s390/suspend.h | 5 - include/asm-s390/sysinfo.h | 121 ---- include/asm-s390/system.h | 462 ------------ include/asm-s390/tape390.h | 103 --- include/asm-s390/termbits.h | 206 ------ include/asm-s390/termios.h | 67 -- include/asm-s390/thread_info.h | 118 ---- include/asm-s390/timer.h | 65 -- include/asm-s390/timex.h | 88 --- include/asm-s390/tlb.h | 156 ---- include/asm-s390/tlbflush.h | 140 ---- include/asm-s390/todclk.h | 23 - include/asm-s390/topology.h | 33 - include/asm-s390/types.h | 63 -- include/asm-s390/uaccess.h | 363 ---------- include/asm-s390/ucontext.h | 20 - include/asm-s390/unaligned.h | 13 - include/asm-s390/unistd.h | 411 ----------- include/asm-s390/user.h | 76 -- include/asm-s390/vtoc.h | 203 ------ include/asm-s390/xor.h | 1 - include/asm-s390/zcrypt.h | 276 -------- 270 files changed, 15320 insertions(+), 15320 deletions(-) create mode 100644 arch/s390/include/asm/Kbuild create mode 100644 arch/s390/include/asm/airq.h create mode 100644 arch/s390/include/asm/appldata.h create mode 100644 arch/s390/include/asm/atomic.h create mode 100644 arch/s390/include/asm/auxvec.h create mode 100644 arch/s390/include/asm/bitops.h create mode 100644 arch/s390/include/asm/bug.h create mode 100644 arch/s390/include/asm/bugs.h create mode 100644 arch/s390/include/asm/byteorder.h create mode 100644 arch/s390/include/asm/cache.h create mode 100644 arch/s390/include/asm/cacheflush.h create mode 100644 arch/s390/include/asm/ccwdev.h create mode 100644 arch/s390/include/asm/ccwgroup.h create mode 100644 arch/s390/include/asm/checksum.h create mode 100644 arch/s390/include/asm/chpid.h create mode 100644 arch/s390/include/asm/chsc.h create mode 100644 arch/s390/include/asm/cio.h create mode 100644 arch/s390/include/asm/cmb.h create mode 100644 arch/s390/include/asm/compat.h create mode 100644 arch/s390/include/asm/cpcmd.h create mode 100644 arch/s390/include/asm/cpu.h create mode 100644 arch/s390/include/asm/cputime.h create mode 100644 arch/s390/include/asm/current.h create mode 100644 arch/s390/include/asm/dasd.h create mode 100644 arch/s390/include/asm/debug.h create mode 100644 arch/s390/include/asm/delay.h create mode 100644 arch/s390/include/asm/device.h create mode 100644 arch/s390/include/asm/diag.h create mode 100644 arch/s390/include/asm/div64.h create mode 100644 arch/s390/include/asm/dma.h create mode 100644 arch/s390/include/asm/ebcdic.h create mode 100644 arch/s390/include/asm/elf.h create mode 100644 arch/s390/include/asm/emergency-restart.h create mode 100644 arch/s390/include/asm/errno.h create mode 100644 arch/s390/include/asm/etr.h create mode 100644 arch/s390/include/asm/extmem.h create mode 100644 arch/s390/include/asm/fb.h create mode 100644 arch/s390/include/asm/fcntl.h create mode 100644 arch/s390/include/asm/fcx.h create mode 100644 arch/s390/include/asm/futex.h create mode 100644 arch/s390/include/asm/hardirq.h create mode 100644 arch/s390/include/asm/hugetlb.h create mode 100644 arch/s390/include/asm/idals.h create mode 100644 arch/s390/include/asm/io.h create mode 100644 arch/s390/include/asm/ioctl.h create mode 100644 arch/s390/include/asm/ioctls.h create mode 100644 arch/s390/include/asm/ipcbuf.h create mode 100644 arch/s390/include/asm/ipl.h create mode 100644 arch/s390/include/asm/irq.h create mode 100644 arch/s390/include/asm/irq_regs.h create mode 100644 arch/s390/include/asm/irqflags.h create mode 100644 arch/s390/include/asm/isc.h create mode 100644 arch/s390/include/asm/itcw.h create mode 100644 arch/s390/include/asm/kdebug.h create mode 100644 arch/s390/include/asm/kexec.h create mode 100644 arch/s390/include/asm/kmap_types.h create mode 100644 arch/s390/include/asm/kprobes.h create mode 100644 arch/s390/include/asm/kvm.h create mode 100644 arch/s390/include/asm/kvm_host.h create mode 100644 arch/s390/include/asm/kvm_para.h create mode 100644 arch/s390/include/asm/kvm_virtio.h create mode 100644 arch/s390/include/asm/linkage.h create mode 100644 arch/s390/include/asm/local.h create mode 100644 arch/s390/include/asm/lowcore.h create mode 100644 arch/s390/include/asm/mathemu.h create mode 100644 arch/s390/include/asm/mman.h create mode 100644 arch/s390/include/asm/mmu.h create mode 100644 arch/s390/include/asm/mmu_context.h create mode 100644 arch/s390/include/asm/module.h create mode 100644 arch/s390/include/asm/monwriter.h create mode 100644 arch/s390/include/asm/msgbuf.h create mode 100644 arch/s390/include/asm/mutex.h create mode 100644 arch/s390/include/asm/page.h create mode 100644 arch/s390/include/asm/param.h create mode 100644 arch/s390/include/asm/pci.h create mode 100644 arch/s390/include/asm/percpu.h create mode 100644 arch/s390/include/asm/pgalloc.h create mode 100644 arch/s390/include/asm/pgtable.h create mode 100644 arch/s390/include/asm/poll.h create mode 100644 arch/s390/include/asm/posix_types.h create mode 100644 arch/s390/include/asm/processor.h create mode 100644 arch/s390/include/asm/ptrace.h create mode 100644 arch/s390/include/asm/qdio.h create mode 100644 arch/s390/include/asm/qeth.h create mode 100644 arch/s390/include/asm/reset.h create mode 100644 arch/s390/include/asm/resource.h create mode 100644 arch/s390/include/asm/rwsem.h create mode 100644 arch/s390/include/asm/s390_ext.h create mode 100644 arch/s390/include/asm/s390_rdev.h create mode 100644 arch/s390/include/asm/scatterlist.h create mode 100644 arch/s390/include/asm/schid.h create mode 100644 arch/s390/include/asm/sclp.h create mode 100644 arch/s390/include/asm/sections.h create mode 100644 arch/s390/include/asm/segment.h create mode 100644 arch/s390/include/asm/sembuf.h create mode 100644 arch/s390/include/asm/setup.h create mode 100644 arch/s390/include/asm/sfp-machine.h create mode 100644 arch/s390/include/asm/sfp-util.h create mode 100644 arch/s390/include/asm/shmbuf.h create mode 100644 arch/s390/include/asm/shmparam.h create mode 100644 arch/s390/include/asm/sigcontext.h create mode 100644 arch/s390/include/asm/siginfo.h create mode 100644 arch/s390/include/asm/signal.h create mode 100644 arch/s390/include/asm/sigp.h create mode 100644 arch/s390/include/asm/smp.h create mode 100644 arch/s390/include/asm/socket.h create mode 100644 arch/s390/include/asm/sockios.h create mode 100644 arch/s390/include/asm/sparsemem.h create mode 100644 arch/s390/include/asm/spinlock.h create mode 100644 arch/s390/include/asm/spinlock_types.h create mode 100644 arch/s390/include/asm/stat.h create mode 100644 arch/s390/include/asm/statfs.h create mode 100644 arch/s390/include/asm/string.h create mode 100644 arch/s390/include/asm/suspend.h create mode 100644 arch/s390/include/asm/sysinfo.h create mode 100644 arch/s390/include/asm/system.h create mode 100644 arch/s390/include/asm/tape390.h create mode 100644 arch/s390/include/asm/termbits.h create mode 100644 arch/s390/include/asm/termios.h create mode 100644 arch/s390/include/asm/thread_info.h create mode 100644 arch/s390/include/asm/timer.h create mode 100644 arch/s390/include/asm/timex.h create mode 100644 arch/s390/include/asm/tlb.h create mode 100644 arch/s390/include/asm/tlbflush.h create mode 100644 arch/s390/include/asm/todclk.h create mode 100644 arch/s390/include/asm/topology.h create mode 100644 arch/s390/include/asm/types.h create mode 100644 arch/s390/include/asm/uaccess.h create mode 100644 arch/s390/include/asm/ucontext.h create mode 100644 arch/s390/include/asm/unaligned.h create mode 100644 arch/s390/include/asm/unistd.h create mode 100644 arch/s390/include/asm/user.h create mode 100644 arch/s390/include/asm/vtoc.h create mode 100644 arch/s390/include/asm/xor.h create mode 100644 arch/s390/include/asm/zcrypt.h delete mode 100644 include/asm-s390/Kbuild delete mode 100644 include/asm-s390/airq.h delete mode 100644 include/asm-s390/appldata.h delete mode 100644 include/asm-s390/atomic.h delete mode 100644 include/asm-s390/auxvec.h delete mode 100644 include/asm-s390/bitops.h delete mode 100644 include/asm-s390/bug.h delete mode 100644 include/asm-s390/bugs.h delete mode 100644 include/asm-s390/byteorder.h delete mode 100644 include/asm-s390/cache.h delete mode 100644 include/asm-s390/cacheflush.h delete mode 100644 include/asm-s390/ccwdev.h delete mode 100644 include/asm-s390/ccwgroup.h delete mode 100644 include/asm-s390/checksum.h delete mode 100644 include/asm-s390/chpid.h delete mode 100644 include/asm-s390/chsc.h delete mode 100644 include/asm-s390/cio.h delete mode 100644 include/asm-s390/cmb.h delete mode 100644 include/asm-s390/compat.h delete mode 100644 include/asm-s390/cpcmd.h delete mode 100644 include/asm-s390/cpu.h delete mode 100644 include/asm-s390/cputime.h delete mode 100644 include/asm-s390/current.h delete mode 100644 include/asm-s390/dasd.h delete mode 100644 include/asm-s390/debug.h delete mode 100644 include/asm-s390/delay.h delete mode 100644 include/asm-s390/device.h delete mode 100644 include/asm-s390/diag.h delete mode 100644 include/asm-s390/div64.h delete mode 100644 include/asm-s390/dma.h delete mode 100644 include/asm-s390/ebcdic.h delete mode 100644 include/asm-s390/elf.h delete mode 100644 include/asm-s390/emergency-restart.h delete mode 100644 include/asm-s390/errno.h delete mode 100644 include/asm-s390/etr.h delete mode 100644 include/asm-s390/extmem.h delete mode 100644 include/asm-s390/fb.h delete mode 100644 include/asm-s390/fcntl.h delete mode 100644 include/asm-s390/fcx.h delete mode 100644 include/asm-s390/futex.h delete mode 100644 include/asm-s390/hardirq.h delete mode 100644 include/asm-s390/hugetlb.h delete mode 100644 include/asm-s390/idals.h delete mode 100644 include/asm-s390/io.h delete mode 100644 include/asm-s390/ioctl.h delete mode 100644 include/asm-s390/ioctls.h delete mode 100644 include/asm-s390/ipcbuf.h delete mode 100644 include/asm-s390/ipl.h delete mode 100644 include/asm-s390/irq.h delete mode 100644 include/asm-s390/irq_regs.h delete mode 100644 include/asm-s390/irqflags.h delete mode 100644 include/asm-s390/isc.h delete mode 100644 include/asm-s390/itcw.h delete mode 100644 include/asm-s390/kdebug.h delete mode 100644 include/asm-s390/kexec.h delete mode 100644 include/asm-s390/kmap_types.h delete mode 100644 include/asm-s390/kprobes.h delete mode 100644 include/asm-s390/kvm.h delete mode 100644 include/asm-s390/kvm_host.h delete mode 100644 include/asm-s390/kvm_para.h delete mode 100644 include/asm-s390/kvm_virtio.h delete mode 100644 include/asm-s390/linkage.h delete mode 100644 include/asm-s390/local.h delete mode 100644 include/asm-s390/lowcore.h delete mode 100644 include/asm-s390/mathemu.h delete mode 100644 include/asm-s390/mman.h delete mode 100644 include/asm-s390/mmu.h delete mode 100644 include/asm-s390/mmu_context.h delete mode 100644 include/asm-s390/module.h delete mode 100644 include/asm-s390/monwriter.h delete mode 100644 include/asm-s390/msgbuf.h delete mode 100644 include/asm-s390/mutex.h delete mode 100644 include/asm-s390/page.h delete mode 100644 include/asm-s390/param.h delete mode 100644 include/asm-s390/pci.h delete mode 100644 include/asm-s390/percpu.h delete mode 100644 include/asm-s390/pgalloc.h delete mode 100644 include/asm-s390/pgtable.h delete mode 100644 include/asm-s390/poll.h delete mode 100644 include/asm-s390/posix_types.h delete mode 100644 include/asm-s390/processor.h delete mode 100644 include/asm-s390/ptrace.h delete mode 100644 include/asm-s390/qdio.h delete mode 100644 include/asm-s390/qeth.h delete mode 100644 include/asm-s390/reset.h delete mode 100644 include/asm-s390/resource.h delete mode 100644 include/asm-s390/rwsem.h delete mode 100644 include/asm-s390/s390_ext.h delete mode 100644 include/asm-s390/s390_rdev.h delete mode 100644 include/asm-s390/scatterlist.h delete mode 100644 include/asm-s390/schid.h delete mode 100644 include/asm-s390/sclp.h delete mode 100644 include/asm-s390/sections.h delete mode 100644 include/asm-s390/segment.h delete mode 100644 include/asm-s390/sembuf.h delete mode 100644 include/asm-s390/setup.h delete mode 100644 include/asm-s390/sfp-machine.h delete mode 100644 include/asm-s390/sfp-util.h delete mode 100644 include/asm-s390/shmbuf.h delete mode 100644 include/asm-s390/shmparam.h delete mode 100644 include/asm-s390/sigcontext.h delete mode 100644 include/asm-s390/siginfo.h delete mode 100644 include/asm-s390/signal.h delete mode 100644 include/asm-s390/sigp.h delete mode 100644 include/asm-s390/smp.h delete mode 100644 include/asm-s390/socket.h delete mode 100644 include/asm-s390/sockios.h delete mode 100644 include/asm-s390/sparsemem.h delete mode 100644 include/asm-s390/spinlock.h delete mode 100644 include/asm-s390/spinlock_types.h delete mode 100644 include/asm-s390/stat.h delete mode 100644 include/asm-s390/statfs.h delete mode 100644 include/asm-s390/string.h delete mode 100644 include/asm-s390/suspend.h delete mode 100644 include/asm-s390/sysinfo.h delete mode 100644 include/asm-s390/system.h delete mode 100644 include/asm-s390/tape390.h delete mode 100644 include/asm-s390/termbits.h delete mode 100644 include/asm-s390/termios.h delete mode 100644 include/asm-s390/thread_info.h delete mode 100644 include/asm-s390/timer.h delete mode 100644 include/asm-s390/timex.h delete mode 100644 include/asm-s390/tlb.h delete mode 100644 include/asm-s390/tlbflush.h delete mode 100644 include/asm-s390/todclk.h delete mode 100644 include/asm-s390/topology.h delete mode 100644 include/asm-s390/types.h delete mode 100644 include/asm-s390/uaccess.h delete mode 100644 include/asm-s390/ucontext.h delete mode 100644 include/asm-s390/unaligned.h delete mode 100644 include/asm-s390/unistd.h delete mode 100644 include/asm-s390/user.h delete mode 100644 include/asm-s390/vtoc.h delete mode 100644 include/asm-s390/xor.h delete mode 100644 include/asm-s390/zcrypt.h diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild new file mode 100644 index 000000000000..63a23415fba6 --- /dev/null +++ b/arch/s390/include/asm/Kbuild @@ -0,0 +1,15 @@ +include include/asm-generic/Kbuild.asm + +header-y += dasd.h +header-y += monwriter.h +header-y += qeth.h +header-y += tape390.h +header-y += ucontext.h +header-y += vtoc.h +header-y += zcrypt.h +header-y += chsc.h + +unifdef-y += cmb.h +unifdef-y += debug.h +unifdef-y += chpid.h +unifdef-y += schid.h diff --git a/arch/s390/include/asm/airq.h b/arch/s390/include/asm/airq.h new file mode 100644 index 000000000000..1ac80d6b0588 --- /dev/null +++ b/arch/s390/include/asm/airq.h @@ -0,0 +1,19 @@ +/* + * include/asm-s390/airq.h + * + * Copyright IBM Corp. 2002,2007 + * Author(s): Ingo Adlung + * Cornelia Huck + * Arnd Bergmann + * Peter Oberparleiter + */ + +#ifndef _ASM_S390_AIRQ_H +#define _ASM_S390_AIRQ_H + +typedef void (*adapter_int_handler_t)(void *, void *); + +void *s390_register_adapter_interrupt(adapter_int_handler_t, void *, u8); +void s390_unregister_adapter_interrupt(void *, u8); + +#endif /* _ASM_S390_AIRQ_H */ diff --git a/arch/s390/include/asm/appldata.h b/arch/s390/include/asm/appldata.h new file mode 100644 index 000000000000..79283dac8281 --- /dev/null +++ b/arch/s390/include/asm/appldata.h @@ -0,0 +1,90 @@ +/* + * include/asm-s390/appldata.h + * + * Copyright (C) IBM Corp. 2006 + * + * Author(s): Melissa Howland + */ + +#ifndef _ASM_S390_APPLDATA_H +#define _ASM_S390_APPLDATA_H + +#include + +#ifndef CONFIG_64BIT + +#define APPLDATA_START_INTERVAL_REC 0x00 /* Function codes for */ +#define APPLDATA_STOP_REC 0x01 /* DIAG 0xDC */ +#define APPLDATA_GEN_EVENT_REC 0x02 +#define APPLDATA_START_CONFIG_REC 0x03 + +/* + * Parameter list for DIAGNOSE X'DC' + */ +struct appldata_parameter_list { + u16 diag; /* The DIAGNOSE code X'00DC' */ + u8 function; /* The function code for the DIAGNOSE */ + u8 parlist_length; /* Length of the parameter list */ + u32 product_id_addr; /* Address of the 16-byte product ID */ + u16 reserved; + u16 buffer_length; /* Length of the application data buffer */ + u32 buffer_addr; /* Address of the application data buffer */ +} __attribute__ ((packed)); + +#else /* CONFIG_64BIT */ + +#define APPLDATA_START_INTERVAL_REC 0x80 +#define APPLDATA_STOP_REC 0x81 +#define APPLDATA_GEN_EVENT_REC 0x82 +#define APPLDATA_START_CONFIG_REC 0x83 + +/* + * Parameter list for DIAGNOSE X'DC' + */ +struct appldata_parameter_list { + u16 diag; + u8 function; + u8 parlist_length; + u32 unused01; + u16 reserved; + u16 buffer_length; + u32 unused02; + u64 product_id_addr; + u64 buffer_addr; +} __attribute__ ((packed)); + +#endif /* CONFIG_64BIT */ + +struct appldata_product_id { + char prod_nr[7]; /* product number */ + u16 prod_fn; /* product function */ + u8 record_nr; /* record number */ + u16 version_nr; /* version */ + u16 release_nr; /* release */ + u16 mod_lvl; /* modification level */ +} __attribute__ ((packed)); + +static inline int appldata_asm(struct appldata_product_id *id, + unsigned short fn, void *buffer, + unsigned short length) +{ + struct appldata_parameter_list parm_list; + int ry; + + if (!MACHINE_IS_VM) + return -ENOSYS; + parm_list.diag = 0xdc; + parm_list.function = fn; + parm_list.parlist_length = sizeof(parm_list); + parm_list.buffer_length = length; + parm_list.product_id_addr = (unsigned long) id; + parm_list.buffer_addr = virt_to_phys(buffer); + asm volatile( + " diag %1,%0,0xdc" + : "=d" (ry) + : "d" (&parm_list), "m" (parm_list), "m" (*id) + : "cc"); + return ry; +} + +#endif /* _ASM_S390_APPLDATA_H */ diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h new file mode 100644 index 000000000000..2d184655bc5d --- /dev/null +++ b/arch/s390/include/asm/atomic.h @@ -0,0 +1,285 @@ +#ifndef __ARCH_S390_ATOMIC__ +#define __ARCH_S390_ATOMIC__ + +#include + +/* + * include/asm-s390/atomic.h + * + * S390 version + * Copyright (C) 1999-2005 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), + * Denis Joseph Barrow, + * Arnd Bergmann (arndb@de.ibm.com) + * + * Derived from "include/asm-i386/bitops.h" + * Copyright (C) 1992, Linus Torvalds + * + */ + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + * S390 uses 'Compare And Swap' for atomicity in SMP enviroment + */ + +typedef struct { + int counter; +} __attribute__ ((aligned (4))) atomic_t; +#define ATOMIC_INIT(i) { (i) } + +#ifdef __KERNEL__ + +#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) + +#define __CS_LOOP(ptr, op_val, op_string) ({ \ + typeof(ptr->counter) old_val, new_val; \ + asm volatile( \ + " l %0,%2\n" \ + "0: lr %1,%0\n" \ + op_string " %1,%3\n" \ + " cs %0,%1,%2\n" \ + " jl 0b" \ + : "=&d" (old_val), "=&d" (new_val), \ + "=Q" (((atomic_t *)(ptr))->counter) \ + : "d" (op_val), "Q" (((atomic_t *)(ptr))->counter) \ + : "cc", "memory"); \ + new_val; \ +}) + +#else /* __GNUC__ */ + +#define __CS_LOOP(ptr, op_val, op_string) ({ \ + typeof(ptr->counter) old_val, new_val; \ + asm volatile( \ + " l %0,0(%3)\n" \ + "0: lr %1,%0\n" \ + op_string " %1,%4\n" \ + " cs %0,%1,0(%3)\n" \ + " jl 0b" \ + : "=&d" (old_val), "=&d" (new_val), \ + "=m" (((atomic_t *)(ptr))->counter) \ + : "a" (ptr), "d" (op_val), \ + "m" (((atomic_t *)(ptr))->counter) \ + : "cc", "memory"); \ + new_val; \ +}) + +#endif /* __GNUC__ */ + +static inline int atomic_read(const atomic_t *v) +{ + barrier(); + return v->counter; +} + +static inline void atomic_set(atomic_t *v, int i) +{ + v->counter = i; + barrier(); +} + +static __inline__ int atomic_add_return(int i, atomic_t * v) +{ + return __CS_LOOP(v, i, "ar"); +} +#define atomic_add(_i, _v) atomic_add_return(_i, _v) +#define atomic_add_negative(_i, _v) (atomic_add_return(_i, _v) < 0) +#define atomic_inc(_v) atomic_add_return(1, _v) +#define atomic_inc_return(_v) atomic_add_return(1, _v) +#define atomic_inc_and_test(_v) (atomic_add_return(1, _v) == 0) + +static __inline__ int atomic_sub_return(int i, atomic_t * v) +{ + return __CS_LOOP(v, i, "sr"); +} +#define atomic_sub(_i, _v) atomic_sub_return(_i, _v) +#define atomic_sub_and_test(_i, _v) (atomic_sub_return(_i, _v) == 0) +#define atomic_dec(_v) atomic_sub_return(1, _v) +#define atomic_dec_return(_v) atomic_sub_return(1, _v) +#define atomic_dec_and_test(_v) (atomic_sub_return(1, _v) == 0) + +static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t * v) +{ + __CS_LOOP(v, ~mask, "nr"); +} + +static __inline__ void atomic_set_mask(unsigned long mask, atomic_t * v) +{ + __CS_LOOP(v, mask, "or"); +} + +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +static __inline__ int atomic_cmpxchg(atomic_t *v, int old, int new) +{ +#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) + asm volatile( + " cs %0,%2,%1" + : "+d" (old), "=Q" (v->counter) + : "d" (new), "Q" (v->counter) + : "cc", "memory"); +#else /* __GNUC__ */ + asm volatile( + " cs %0,%3,0(%2)" + : "+d" (old), "=m" (v->counter) + : "a" (v), "d" (new), "m" (v->counter) + : "cc", "memory"); +#endif /* __GNUC__ */ + return old; +} + +static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + c = atomic_read(v); + for (;;) { + if (unlikely(c == u)) + break; + old = atomic_cmpxchg(v, c, c + a); + if (likely(old == c)) + break; + c = old; + } + return c != u; +} + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +#undef __CS_LOOP + +#ifdef __s390x__ +typedef struct { + long long counter; +} __attribute__ ((aligned (8))) atomic64_t; +#define ATOMIC64_INIT(i) { (i) } + +#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) + +#define __CSG_LOOP(ptr, op_val, op_string) ({ \ + typeof(ptr->counter) old_val, new_val; \ + asm volatile( \ + " lg %0,%2\n" \ + "0: lgr %1,%0\n" \ + op_string " %1,%3\n" \ + " csg %0,%1,%2\n" \ + " jl 0b" \ + : "=&d" (old_val), "=&d" (new_val), \ + "=Q" (((atomic_t *)(ptr))->counter) \ + : "d" (op_val), "Q" (((atomic_t *)(ptr))->counter) \ + : "cc", "memory" ); \ + new_val; \ +}) + +#else /* __GNUC__ */ + +#define __CSG_LOOP(ptr, op_val, op_string) ({ \ + typeof(ptr->counter) old_val, new_val; \ + asm volatile( \ + " lg %0,0(%3)\n" \ + "0: lgr %1,%0\n" \ + op_string " %1,%4\n" \ + " csg %0,%1,0(%3)\n" \ + " jl 0b" \ + : "=&d" (old_val), "=&d" (new_val), \ + "=m" (((atomic_t *)(ptr))->counter) \ + : "a" (ptr), "d" (op_val), \ + "m" (((atomic_t *)(ptr))->counter) \ + : "cc", "memory" ); \ + new_val; \ +}) + +#endif /* __GNUC__ */ + +static inline long long atomic64_read(const atomic64_t *v) +{ + barrier(); + return v->counter; +} + +static inline void atomic64_set(atomic64_t *v, long long i) +{ + v->counter = i; + barrier(); +} + +static __inline__ long long atomic64_add_return(long long i, atomic64_t * v) +{ + return __CSG_LOOP(v, i, "agr"); +} +#define atomic64_add(_i, _v) atomic64_add_return(_i, _v) +#define atomic64_add_negative(_i, _v) (atomic64_add_return(_i, _v) < 0) +#define atomic64_inc(_v) atomic64_add_return(1, _v) +#define atomic64_inc_return(_v) atomic64_add_return(1, _v) +#define atomic64_inc_and_test(_v) (atomic64_add_return(1, _v) == 0) + +static __inline__ long long atomic64_sub_return(long long i, atomic64_t * v) +{ + return __CSG_LOOP(v, i, "sgr"); +} +#define atomic64_sub(_i, _v) atomic64_sub_return(_i, _v) +#define atomic64_sub_and_test(_i, _v) (atomic64_sub_return(_i, _v) == 0) +#define atomic64_dec(_v) atomic64_sub_return(1, _v) +#define atomic64_dec_return(_v) atomic64_sub_return(1, _v) +#define atomic64_dec_and_test(_v) (atomic64_sub_return(1, _v) == 0) + +static __inline__ void atomic64_clear_mask(unsigned long mask, atomic64_t * v) +{ + __CSG_LOOP(v, ~mask, "ngr"); +} + +static __inline__ void atomic64_set_mask(unsigned long mask, atomic64_t * v) +{ + __CSG_LOOP(v, mask, "ogr"); +} + +#define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) + +static __inline__ long long atomic64_cmpxchg(atomic64_t *v, + long long old, long long new) +{ +#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) + asm volatile( + " csg %0,%2,%1" + : "+d" (old), "=Q" (v->counter) + : "d" (new), "Q" (v->counter) + : "cc", "memory"); +#else /* __GNUC__ */ + asm volatile( + " csg %0,%3,0(%2)" + : "+d" (old), "=m" (v->counter) + : "a" (v), "d" (new), "m" (v->counter) + : "cc", "memory"); +#endif /* __GNUC__ */ + return old; +} + +static __inline__ int atomic64_add_unless(atomic64_t *v, + long long a, long long u) +{ + long long c, old; + c = atomic64_read(v); + for (;;) { + if (unlikely(c == u)) + break; + old = atomic64_cmpxchg(v, c, c + a); + if (likely(old == c)) + break; + c = old; + } + return c != u; +} + +#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) + +#undef __CSG_LOOP +#endif + +#define smp_mb__before_atomic_dec() smp_mb() +#define smp_mb__after_atomic_dec() smp_mb() +#define smp_mb__before_atomic_inc() smp_mb() +#define smp_mb__after_atomic_inc() smp_mb() + +#include +#endif /* __KERNEL__ */ +#endif /* __ARCH_S390_ATOMIC__ */ diff --git a/arch/s390/include/asm/auxvec.h b/arch/s390/include/asm/auxvec.h new file mode 100644 index 000000000000..0d340720fd99 --- /dev/null +++ b/arch/s390/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __ASMS390_AUXVEC_H +#define __ASMS390_AUXVEC_H + +#endif diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h new file mode 100644 index 000000000000..b4eb24ab5af9 --- /dev/null +++ b/arch/s390/include/asm/bitops.h @@ -0,0 +1,884 @@ +#ifndef _S390_BITOPS_H +#define _S390_BITOPS_H + +/* + * include/asm-s390/bitops.h + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) + * + * Derived from "include/asm-i386/bitops.h" + * Copyright (C) 1992, Linus Torvalds + * + */ + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#include + +/* + * 32 bit bitops format: + * bit 0 is the LSB of *addr; bit 31 is the MSB of *addr; + * bit 32 is the LSB of *(addr+4). That combined with the + * big endian byte order on S390 give the following bit + * order in memory: + * 1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10 \ + * 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00 + * after that follows the next long with bit numbers + * 3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30 + * 2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20 + * The reason for this bit ordering is the fact that + * in the architecture independent code bits operations + * of the form "flags |= (1 << bitnr)" are used INTERMIXED + * with operation of the form "set_bit(bitnr, flags)". + * + * 64 bit bitops format: + * bit 0 is the LSB of *addr; bit 63 is the MSB of *addr; + * bit 64 is the LSB of *(addr+8). That combined with the + * big endian byte order on S390 give the following bit + * order in memory: + * 3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30 + * 2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20 + * 1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10 + * 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00 + * after that follows the next long with bit numbers + * 7f 7e 7d 7c 7b 7a 79 78 77 76 75 74 73 72 71 70 + * 6f 6e 6d 6c 6b 6a 69 68 67 66 65 64 63 62 61 60 + * 5f 5e 5d 5c 5b 5a 59 58 57 56 55 54 53 52 51 50 + * 4f 4e 4d 4c 4b 4a 49 48 47 46 45 44 43 42 41 40 + * The reason for this bit ordering is the fact that + * in the architecture independent code bits operations + * of the form "flags |= (1 << bitnr)" are used INTERMIXED + * with operation of the form "set_bit(bitnr, flags)". + */ + +/* bitmap tables from arch/S390/kernel/bitmap.S */ +extern const char _oi_bitmap[]; +extern const char _ni_bitmap[]; +extern const char _zb_findmap[]; +extern const char _sb_findmap[]; + +#ifndef __s390x__ + +#define __BITOPS_ALIGN 3 +#define __BITOPS_WORDSIZE 32 +#define __BITOPS_OR "or" +#define __BITOPS_AND "nr" +#define __BITOPS_XOR "xr" + +#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) + +#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string) \ + asm volatile( \ + " l %0,%2\n" \ + "0: lr %1,%0\n" \ + __op_string " %1,%3\n" \ + " cs %0,%1,%2\n" \ + " jl 0b" \ + : "=&d" (__old), "=&d" (__new), \ + "=Q" (*(unsigned long *) __addr) \ + : "d" (__val), "Q" (*(unsigned long *) __addr) \ + : "cc"); + +#else /* __GNUC__ */ + +#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string) \ + asm volatile( \ + " l %0,0(%4)\n" \ + "0: lr %1,%0\n" \ + __op_string " %1,%3\n" \ + " cs %0,%1,0(%4)\n" \ + " jl 0b" \ + : "=&d" (__old), "=&d" (__new), \ + "=m" (*(unsigned long *) __addr) \ + : "d" (__val), "a" (__addr), \ + "m" (*(unsigned long *) __addr) : "cc"); + +#endif /* __GNUC__ */ + +#else /* __s390x__ */ + +#define __BITOPS_ALIGN 7 +#define __BITOPS_WORDSIZE 64 +#define __BITOPS_OR "ogr" +#define __BITOPS_AND "ngr" +#define __BITOPS_XOR "xgr" + +#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) + +#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string) \ + asm volatile( \ + " lg %0,%2\n" \ + "0: lgr %1,%0\n" \ + __op_string " %1,%3\n" \ + " csg %0,%1,%2\n" \ + " jl 0b" \ + : "=&d" (__old), "=&d" (__new), \ + "=Q" (*(unsigned long *) __addr) \ + : "d" (__val), "Q" (*(unsigned long *) __addr) \ + : "cc"); + +#else /* __GNUC__ */ + +#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string) \ + asm volatile( \ + " lg %0,0(%4)\n" \ + "0: lgr %1,%0\n" \ + __op_string " %1,%3\n" \ + " csg %0,%1,0(%4)\n" \ + " jl 0b" \ + : "=&d" (__old), "=&d" (__new), \ + "=m" (*(unsigned long *) __addr) \ + : "d" (__val), "a" (__addr), \ + "m" (*(unsigned long *) __addr) : "cc"); + + +#endif /* __GNUC__ */ + +#endif /* __s390x__ */ + +#define __BITOPS_WORDS(bits) (((bits)+__BITOPS_WORDSIZE-1)/__BITOPS_WORDSIZE) +#define __BITOPS_BARRIER() asm volatile("" : : : "memory") + +#ifdef CONFIG_SMP +/* + * SMP safe set_bit routine based on compare and swap (CS) + */ +static inline void set_bit_cs(unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr, old, new, mask; + + addr = (unsigned long) ptr; + /* calculate address for CS */ + addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3; + /* make OR mask */ + mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1)); + /* Do the atomic update. */ + __BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR); +} + +/* + * SMP safe clear_bit routine based on compare and swap (CS) + */ +static inline void clear_bit_cs(unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr, old, new, mask; + + addr = (unsigned long) ptr; + /* calculate address for CS */ + addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3; + /* make AND mask */ + mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1))); + /* Do the atomic update. */ + __BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND); +} + +/* + * SMP safe change_bit routine based on compare and swap (CS) + */ +static inline void change_bit_cs(unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr, old, new, mask; + + addr = (unsigned long) ptr; + /* calculate address for CS */ + addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3; + /* make XOR mask */ + mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1)); + /* Do the atomic update. */ + __BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR); +} + +/* + * SMP safe test_and_set_bit routine based on compare and swap (CS) + */ +static inline int +test_and_set_bit_cs(unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr, old, new, mask; + + addr = (unsigned long) ptr; + /* calculate address for CS */ + addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3; + /* make OR/test mask */ + mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1)); + /* Do the atomic update. */ + __BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR); + __BITOPS_BARRIER(); + return (old & mask) != 0; +} + +/* + * SMP safe test_and_clear_bit routine based on compare and swap (CS) + */ +static inline int +test_and_clear_bit_cs(unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr, old, new, mask; + + addr = (unsigned long) ptr; + /* calculate address for CS */ + addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3; + /* make AND/test mask */ + mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1))); + /* Do the atomic update. */ + __BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND); + __BITOPS_BARRIER(); + return (old ^ new) != 0; +} + +/* + * SMP safe test_and_change_bit routine based on compare and swap (CS) + */ +static inline int +test_and_change_bit_cs(unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr, old, new, mask; + + addr = (unsigned long) ptr; + /* calculate address for CS */ + addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3; + /* make XOR/test mask */ + mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1)); + /* Do the atomic update. */ + __BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR); + __BITOPS_BARRIER(); + return (old & mask) != 0; +} +#endif /* CONFIG_SMP */ + +/* + * fast, non-SMP set_bit routine + */ +static inline void __set_bit(unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr; + + addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); + asm volatile( + " oc 0(1,%1),0(%2)" + : "=m" (*(char *) addr) : "a" (addr), + "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" ); +} + +static inline void +__constant_set_bit(const unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr; + + addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); + *(unsigned char *) addr |= 1 << (nr & 7); +} + +#define set_bit_simple(nr,addr) \ +(__builtin_constant_p((nr)) ? \ + __constant_set_bit((nr),(addr)) : \ + __set_bit((nr),(addr)) ) + +/* + * fast, non-SMP clear_bit routine + */ +static inline void +__clear_bit(unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr; + + addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); + asm volatile( + " nc 0(1,%1),0(%2)" + : "=m" (*(char *) addr) : "a" (addr), + "a" (_ni_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc"); +} + +static inline void +__constant_clear_bit(const unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr; + + addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); + *(unsigned char *) addr &= ~(1 << (nr & 7)); +} + +#define clear_bit_simple(nr,addr) \ +(__builtin_constant_p((nr)) ? \ + __constant_clear_bit((nr),(addr)) : \ + __clear_bit((nr),(addr)) ) + +/* + * fast, non-SMP change_bit routine + */ +static inline void __change_bit(unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr; + + addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); + asm volatile( + " xc 0(1,%1),0(%2)" + : "=m" (*(char *) addr) : "a" (addr), + "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" ); +} + +static inline void +__constant_change_bit(const unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr; + + addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); + *(unsigned char *) addr ^= 1 << (nr & 7); +} + +#define change_bit_simple(nr,addr) \ +(__builtin_constant_p((nr)) ? \ + __constant_change_bit((nr),(addr)) : \ + __change_bit((nr),(addr)) ) + +/* + * fast, non-SMP test_and_set_bit routine + */ +static inline int +test_and_set_bit_simple(unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr; + unsigned char ch; + + addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); + ch = *(unsigned char *) addr; + asm volatile( + " oc 0(1,%1),0(%2)" + : "=m" (*(char *) addr) + : "a" (addr), "a" (_oi_bitmap + (nr & 7)), + "m" (*(char *) addr) : "cc", "memory"); + return (ch >> (nr & 7)) & 1; +} +#define __test_and_set_bit(X,Y) test_and_set_bit_simple(X,Y) + +/* + * fast, non-SMP test_and_clear_bit routine + */ +static inline int +test_and_clear_bit_simple(unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr; + unsigned char ch; + + addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); + ch = *(unsigned char *) addr; + asm volatile( + " nc 0(1,%1),0(%2)" + : "=m" (*(char *) addr) + : "a" (addr), "a" (_ni_bitmap + (nr & 7)), + "m" (*(char *) addr) : "cc", "memory"); + return (ch >> (nr & 7)) & 1; +} +#define __test_and_clear_bit(X,Y) test_and_clear_bit_simple(X,Y) + +/* + * fast, non-SMP test_and_change_bit routine + */ +static inline int +test_and_change_bit_simple(unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr; + unsigned char ch; + + addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); + ch = *(unsigned char *) addr; + asm volatile( + " xc 0(1,%1),0(%2)" + : "=m" (*(char *) addr) + : "a" (addr), "a" (_oi_bitmap + (nr & 7)), + "m" (*(char *) addr) : "cc", "memory"); + return (ch >> (nr & 7)) & 1; +} +#define __test_and_change_bit(X,Y) test_and_change_bit_simple(X,Y) + +#ifdef CONFIG_SMP +#define set_bit set_bit_cs +#define clear_bit clear_bit_cs +#define change_bit change_bit_cs +#define test_and_set_bit test_and_set_bit_cs +#define test_and_clear_bit test_and_clear_bit_cs +#define test_and_change_bit test_and_change_bit_cs +#else +#define set_bit set_bit_simple +#define clear_bit clear_bit_simple +#define change_bit change_bit_simple +#define test_and_set_bit test_and_set_bit_simple +#define test_and_clear_bit test_and_clear_bit_simple +#define test_and_change_bit test_and_change_bit_simple +#endif + + +/* + * This routine doesn't need to be atomic. + */ + +static inline int __test_bit(unsigned long nr, const volatile unsigned long *ptr) +{ + unsigned long addr; + unsigned char ch; + + addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); + ch = *(volatile unsigned char *) addr; + return (ch >> (nr & 7)) & 1; +} + +static inline int +__constant_test_bit(unsigned long nr, const volatile unsigned long *addr) { + return (((volatile char *) addr) + [(nr^(__BITOPS_WORDSIZE-8))>>3] & (1<<(nr&7))) != 0; +} + +#define test_bit(nr,addr) \ +(__builtin_constant_p((nr)) ? \ + __constant_test_bit((nr),(addr)) : \ + __test_bit((nr),(addr)) ) + +/* + * Optimized find bit helper functions. + */ + +/** + * __ffz_word_loop - find byte offset of first long != -1UL + * @addr: pointer to array of unsigned long + * @size: size of the array in bits + */ +static inline unsigned long __ffz_word_loop(const unsigned long *addr, + unsigned long size) +{ + typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype; + unsigned long bytes = 0; + + asm volatile( +#ifndef __s390x__ + " ahi %1,-1\n" + " sra %1,5\n" + " jz 1f\n" + "0: c %2,0(%0,%3)\n" + " jne 1f\n" + " la %0,4(%0)\n" + " brct %1,0b\n" + "1:\n" +#else + " aghi %1,-1\n" + " srag %1,%1,6\n" + " jz 1f\n" + "0: cg %2,0(%0,%3)\n" + " jne 1f\n" + " la %0,8(%0)\n" + " brct %1,0b\n" + "1:\n" +#endif + : "+&a" (bytes), "+&d" (size) + : "d" (-1UL), "a" (addr), "m" (*(addrtype *) addr) + : "cc" ); + return bytes; +} + +/** + * __ffs_word_loop - find byte offset of first long != 0UL + * @addr: pointer to array of unsigned long + * @size: size of the array in bits + */ +static inline unsigned long __ffs_word_loop(const unsigned long *addr, + unsigned long size) +{ + typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype; + unsigned long bytes = 0; + + asm volatile( +#ifndef __s390x__ + " ahi %1,-1\n" + " sra %1,5\n" + " jz 1f\n" + "0: c %2,0(%0,%3)\n" + " jne 1f\n" + " la %0,4(%0)\n" + " brct %1,0b\n" + "1:\n" +#else + " aghi %1,-1\n" + " srag %1,%1,6\n" + " jz 1f\n" + "0: cg %2,0(%0,%3)\n" + " jne 1f\n" + " la %0,8(%0)\n" + " brct %1,0b\n" + "1:\n" +#endif + : "+&a" (bytes), "+&a" (size) + : "d" (0UL), "a" (addr), "m" (*(addrtype *) addr) + : "cc" ); + return bytes; +} + +/** + * __ffz_word - add number of the first unset bit + * @nr: base value the bit number is added to + * @word: the word that is searched for unset bits + */ +static inline unsigned long __ffz_word(unsigned long nr, unsigned long word) +{ +#ifdef __s390x__ + if (likely((word & 0xffffffff) == 0xffffffff)) { + word >>= 32; + nr += 32; + } +#endif + if (likely((word & 0xffff) == 0xffff)) { + word >>= 16; + nr += 16; + } + if (likely((word & 0xff) == 0xff)) { + word >>= 8; + nr += 8; + } + return nr + _zb_findmap[(unsigned char) word]; +} + +/** + * __ffs_word - add number of the first set bit + * @nr: base value the bit number is added to + * @word: the word that is searched for set bits + */ +static inline unsigned long __ffs_word(unsigned long nr, unsigned long word) +{ +#ifdef __s390x__ + if (likely((word & 0xffffffff) == 0)) { + word >>= 32; + nr += 32; + } +#endif + if (likely((word & 0xffff) == 0)) { + word >>= 16; + nr += 16; + } + if (likely((word & 0xff) == 0)) { + word >>= 8; + nr += 8; + } + return nr + _sb_findmap[(unsigned char) word]; +} + + +/** + * __load_ulong_be - load big endian unsigned long + * @p: pointer to array of unsigned long + * @offset: byte offset of source value in the array + */ +static inline unsigned long __load_ulong_be(const unsigned long *p, + unsigned long offset) +{ + p = (unsigned long *)((unsigned long) p + offset); + return *p; +} + +/** + * __load_ulong_le - load little endian unsigned long + * @p: pointer to array of unsigned long + * @offset: byte offset of source value in the array + */ +static inline unsigned long __load_ulong_le(const unsigned long *p, + unsigned long offset) +{ + unsigned long word; + + p = (unsigned long *)((unsigned long) p + offset); +#ifndef __s390x__ + asm volatile( + " ic %0,0(%1)\n" + " icm %0,2,1(%1)\n" + " icm %0,4,2(%1)\n" + " icm %0,8,3(%1)" + : "=&d" (word) : "a" (p), "m" (*p) : "cc"); +#else + asm volatile( + " lrvg %0,%1" + : "=d" (word) : "m" (*p) ); +#endif + return word; +} + +/* + * The various find bit functions. + */ + +/* + * ffz - find first zero in word. + * @word: The word to search + * + * Undefined if no zero exists, so code should check against ~0UL first. + */ +static inline unsigned long ffz(unsigned long word) +{ + return __ffz_word(0, word); +} + +/** + * __ffs - find first bit in word. + * @word: The word to search + * + * Undefined if no bit exists, so code should check against 0 first. + */ +static inline unsigned long __ffs (unsigned long word) +{ + return __ffs_word(0, word); +} + +/** + * ffs - find first bit set + * @x: the word to search + * + * This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ +static inline int ffs(int x) +{ + if (!x) + return 0; + return __ffs_word(1, x); +} + +/** + * find_first_zero_bit - find the first zero bit in a memory region + * @addr: The address to start the search at + * @size: The maximum size to search + * + * Returns the bit-number of the first zero bit, not the number of the byte + * containing a bit. + */ +static inline unsigned long find_first_zero_bit(const unsigned long *addr, + unsigned long size) +{ + unsigned long bytes, bits; + + if (!size) + return 0; + bytes = __ffz_word_loop(addr, size); + bits = __ffz_word(bytes*8, __load_ulong_be(addr, bytes)); + return (bits < size) ? bits : size; +} + +/** + * find_first_bit - find the first set bit in a memory region + * @addr: The address to start the search at + * @size: The maximum size to search + * + * Returns the bit-number of the first set bit, not the number of the byte + * containing a bit. + */ +static inline unsigned long find_first_bit(const unsigned long * addr, + unsigned long size) +{ + unsigned long bytes, bits; + + if (!size) + return 0; + bytes = __ffs_word_loop(addr, size); + bits = __ffs_word(bytes*8, __load_ulong_be(addr, bytes)); + return (bits < size) ? bits : size; +} + +/** + * find_next_zero_bit - find the first zero bit in a memory region + * @addr: The address to base the search on + * @offset: The bitnumber to start searching at + * @size: The maximum size to search + */ +static inline int find_next_zero_bit (const unsigned long * addr, + unsigned long size, + unsigned long offset) +{ + const unsigned long *p; + unsigned long bit, set; + + if (offset >= size) + return size; + bit = offset & (__BITOPS_WORDSIZE - 1); + offset -= bit; + size -= offset; + p = addr + offset / __BITOPS_WORDSIZE; + if (bit) { + /* + * __ffz_word returns __BITOPS_WORDSIZE + * if no zero bit is present in the word. + */ + set = __ffz_word(0, *p >> bit) + bit; + if (set >= size) + return size + offset; + if (set < __BITOPS_WORDSIZE) + return set + offset; + offset += __BITOPS_WORDSIZE; + size -= __BITOPS_WORDSIZE; + p++; + } + return offset + find_first_zero_bit(p, size); +} + +/** + * find_next_bit - find the first set bit in a memory region + * @addr: The address to base the search on + * @offset: The bitnumber to start searching at + * @size: The maximum size to search + */ +static inline int find_next_bit (const unsigned long * addr, + unsigned long size, + unsigned long offset) +{ + const unsigned long *p; + unsigned long bit, set; + + if (offset >= size) + return size; + bit = offset & (__BITOPS_WORDSIZE - 1); + offset -= bit; + size -= offset; + p = addr + offset / __BITOPS_WORDSIZE; + if (bit) { + /* + * __ffs_word returns __BITOPS_WORDSIZE + * if no one bit is present in the word. + */ + set = __ffs_word(0, *p & (~0UL << bit)); + if (set >= size) + return size + offset; + if (set < __BITOPS_WORDSIZE) + return set + offset; + offset += __BITOPS_WORDSIZE; + size -= __BITOPS_WORDSIZE; + p++; + } + return offset + find_first_bit(p, size); +} + +/* + * Every architecture must define this function. It's the fastest + * way of searching a 140-bit bitmap where the first 100 bits are + * unlikely to be set. It's guaranteed that at least one of the 140 + * bits is cleared. + */ +static inline int sched_find_first_bit(unsigned long *b) +{ + return find_first_bit(b, 140); +} + +#include +#include +#include + +#include +#include + +/* + * ATTENTION: intel byte ordering convention for ext2 and minix !! + * bit 0 is the LSB of addr; bit 31 is the MSB of addr; + * bit 32 is the LSB of (addr+4). + * That combined with the little endian byte order of Intel gives the + * following bit order in memory: + * 07 06 05 04 03 02 01 00 15 14 13 12 11 10 09 08 \ + * 23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24 + */ + +#define ext2_set_bit(nr, addr) \ + __test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr) +#define ext2_set_bit_atomic(lock, nr, addr) \ + test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr) +#define ext2_clear_bit(nr, addr) \ + __test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr) +#define ext2_clear_bit_atomic(lock, nr, addr) \ + test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr) +#define ext2_test_bit(nr, addr) \ + test_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr) + +static inline int ext2_find_first_zero_bit(void *vaddr, unsigned int size) +{ + unsigned long bytes, bits; + + if (!size) + return 0; + bytes = __ffz_word_loop(vaddr, size); + bits = __ffz_word(bytes*8, __load_ulong_le(vaddr, bytes)); + return (bits < size) ? bits : size; +} + +static inline int ext2_find_next_zero_bit(void *vaddr, unsigned long size, + unsigned long offset) +{ + unsigned long *addr = vaddr, *p; + unsigned long bit, set; + + if (offset >= size) + return size; + bit = offset & (__BITOPS_WORDSIZE - 1); + offset -= bit; + size -= offset; + p = addr + offset / __BITOPS_WORDSIZE; + if (bit) { + /* + * s390 version of ffz returns __BITOPS_WORDSIZE + * if no zero bit is present in the word. + */ + set = ffz(__load_ulong_le(p, 0) >> bit) + bit; + if (set >= size) + return size + offset; + if (set < __BITOPS_WORDSIZE) + return set + offset; + offset += __BITOPS_WORDSIZE; + size -= __BITOPS_WORDSIZE; + p++; + } + return offset + ext2_find_first_zero_bit(p, size); +} + +static inline unsigned long ext2_find_first_bit(void *vaddr, + unsigned long size) +{ + unsigned long bytes, bits; + + if (!size) + return 0; + bytes = __ffs_word_loop(vaddr, size); + bits = __ffs_word(bytes*8, __load_ulong_le(vaddr, bytes)); + return (bits < size) ? bits : size; +} + +static inline int ext2_find_next_bit(void *vaddr, unsigned long size, + unsigned long offset) +{ + unsigned long *addr = vaddr, *p; + unsigned long bit, set; + + if (offset >= size) + return size; + bit = offset & (__BITOPS_WORDSIZE - 1); + offset -= bit; + size -= offset; + p = addr + offset / __BITOPS_WORDSIZE; + if (bit) { + /* + * s390 version of ffz returns __BITOPS_WORDSIZE + * if no zero bit is present in the word. + */ + set = ffs(__load_ulong_le(p, 0) >> bit) + bit; + if (set >= size) + return size + offset; + if (set < __BITOPS_WORDSIZE) + return set + offset; + offset += __BITOPS_WORDSIZE; + size -= __BITOPS_WORDSIZE; + p++; + } + return offset + ext2_find_first_bit(p, size); +} + +#include + +#endif /* __KERNEL__ */ + +#endif /* _S390_BITOPS_H */ diff --git a/arch/s390/include/asm/bug.h b/arch/s390/include/asm/bug.h new file mode 100644 index 000000000000..384e3621e341 --- /dev/null +++ b/arch/s390/include/asm/bug.h @@ -0,0 +1,70 @@ +#ifndef _ASM_S390_BUG_H +#define _ASM_S390_BUG_H + +#include + +#ifdef CONFIG_BUG + +#ifdef CONFIG_64BIT +#define S390_LONG ".quad" +#else +#define S390_LONG ".long" +#endif + +#ifdef CONFIG_DEBUG_BUGVERBOSE + +#define __EMIT_BUG(x) do { \ + asm volatile( \ + "0: j 0b+2\n" \ + "1:\n" \ + ".section .rodata.str,\"aMS\",@progbits,1\n" \ + "2: .asciz \""__FILE__"\"\n" \ + ".previous\n" \ + ".section __bug_table,\"a\"\n" \ + "3:\t" S390_LONG "\t1b,2b\n" \ + " .short %0,%1\n" \ + " .org 3b+%2\n" \ + ".previous\n" \ + : : "i" (__LINE__), \ + "i" (x), \ + "i" (sizeof(struct bug_entry))); \ +} while (0) + +#else /* CONFIG_DEBUG_BUGVERBOSE */ + +#define __EMIT_BUG(x) do { \ + asm volatile( \ + "0: j 0b+2\n" \ + "1:\n" \ + ".section __bug_table,\"a\"\n" \ + "2:\t" S390_LONG "\t1b\n" \ + " .short %0\n" \ + " .org 2b+%1\n" \ + ".previous\n" \ + : : "i" (x), \ + "i" (sizeof(struct bug_entry))); \ +} while (0) + +#endif /* CONFIG_DEBUG_BUGVERBOSE */ + +#define BUG() __EMIT_BUG(0) + +#define WARN_ON(x) ({ \ + int __ret_warn_on = !!(x); \ + if (__builtin_constant_p(__ret_warn_on)) { \ + if (__ret_warn_on) \ + __EMIT_BUG(BUGFLAG_WARNING); \ + } else { \ + if (unlikely(__ret_warn_on)) \ + __EMIT_BUG(BUGFLAG_WARNING); \ + } \ + unlikely(__ret_warn_on); \ +}) + +#define HAVE_ARCH_BUG +#define HAVE_ARCH_WARN_ON +#endif /* CONFIG_BUG */ + +#include + +#endif /* _ASM_S390_BUG_H */ diff --git a/arch/s390/include/asm/bugs.h b/arch/s390/include/asm/bugs.h new file mode 100644 index 000000000000..011f1e6a2a6c --- /dev/null +++ b/arch/s390/include/asm/bugs.h @@ -0,0 +1,22 @@ +/* + * include/asm-s390/bugs.h + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) + * + * Derived from "include/asm-i386/bugs.h" + * Copyright (C) 1994 Linus Torvalds + */ + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ + +static inline void check_bugs(void) +{ + /* s390 has no bugs ... */ +} diff --git a/arch/s390/include/asm/byteorder.h b/arch/s390/include/asm/byteorder.h new file mode 100644 index 000000000000..1fe2492baa8d --- /dev/null +++ b/arch/s390/include/asm/byteorder.h @@ -0,0 +1,125 @@ +#ifndef _S390_BYTEORDER_H +#define _S390_BYTEORDER_H + +/* + * include/asm-s390/byteorder.h + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) + */ + +#include + +#ifdef __GNUC__ + +#ifdef __s390x__ +static inline __u64 ___arch__swab64p(const __u64 *x) +{ + __u64 result; + + asm volatile("lrvg %0,%1" : "=d" (result) : "m" (*x)); + return result; +} + +static inline __u64 ___arch__swab64(__u64 x) +{ + __u64 result; + + asm volatile("lrvgr %0,%1" : "=d" (result) : "d" (x)); + return result; +} + +static inline void ___arch__swab64s(__u64 *x) +{ + *x = ___arch__swab64p(x); +} +#endif /* __s390x__ */ + +static inline __u32 ___arch__swab32p(const __u32 *x) +{ + __u32 result; + + asm volatile( +#ifndef __s390x__ + " icm %0,8,3(%1)\n" + " icm %0,4,2(%1)\n" + " icm %0,2,1(%1)\n" + " ic %0,0(%1)" + : "=&d" (result) : "a" (x), "m" (*x) : "cc"); +#else /* __s390x__ */ + " lrv %0,%1" + : "=d" (result) : "m" (*x)); +#endif /* __s390x__ */ + return result; +} + +static inline __u32 ___arch__swab32(__u32 x) +{ +#ifndef __s390x__ + return ___arch__swab32p(&x); +#else /* __s390x__ */ + __u32 result; + + asm volatile("lrvr %0,%1" : "=d" (result) : "d" (x)); + return result; +#endif /* __s390x__ */ +} + +static __inline__ void ___arch__swab32s(__u32 *x) +{ + *x = ___arch__swab32p(x); +} + +static __inline__ __u16 ___arch__swab16p(const __u16 *x) +{ + __u16 result; + + asm volatile( +#ifndef __s390x__ + " icm %0,2,1(%1)\n" + " ic %0,0(%1)\n" + : "=&d" (result) : "a" (x), "m" (*x) : "cc"); +#else /* __s390x__ */ + " lrvh %0,%1" + : "=d" (result) : "m" (*x)); +#endif /* __s390x__ */ + return result; +} + +static __inline__ __u16 ___arch__swab16(__u16 x) +{ + return ___arch__swab16p(&x); +} + +static __inline__ void ___arch__swab16s(__u16 *x) +{ + *x = ___arch__swab16p(x); +} + +#ifdef __s390x__ +#define __arch__swab64(x) ___arch__swab64(x) +#define __arch__swab64p(x) ___arch__swab64p(x) +#define __arch__swab64s(x) ___arch__swab64s(x) +#endif /* __s390x__ */ +#define __arch__swab32(x) ___arch__swab32(x) +#define __arch__swab16(x) ___arch__swab16(x) +#define __arch__swab32p(x) ___arch__swab32p(x) +#define __arch__swab16p(x) ___arch__swab16p(x) +#define __arch__swab32s(x) ___arch__swab32s(x) +#define __arch__swab16s(x) ___arch__swab16s(x) + +#ifndef __s390x__ +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif +#else /* __s390x__ */ +#define __BYTEORDER_HAS_U64__ +#endif /* __s390x__ */ + +#endif /* __GNUC__ */ + +#include + +#endif /* _S390_BYTEORDER_H */ diff --git a/arch/s390/include/asm/cache.h b/arch/s390/include/asm/cache.h new file mode 100644 index 000000000000..9b866816863c --- /dev/null +++ b/arch/s390/include/asm/cache.h @@ -0,0 +1,19 @@ +/* + * include/asm-s390/cache.h + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * + * Derived from "include/asm-i386/cache.h" + * Copyright (C) 1992, Linus Torvalds + */ + +#ifndef __ARCH_S390_CACHE_H +#define __ARCH_S390_CACHE_H + +#define L1_CACHE_BYTES 256 +#define L1_CACHE_SHIFT 8 + +#define __read_mostly __attribute__((__section__(".data.read_mostly"))) + +#endif diff --git a/arch/s390/include/asm/cacheflush.h b/arch/s390/include/asm/cacheflush.h new file mode 100644 index 000000000000..49d5af916d01 --- /dev/null +++ b/arch/s390/include/asm/cacheflush.h @@ -0,0 +1,31 @@ +#ifndef _S390_CACHEFLUSH_H +#define _S390_CACHEFLUSH_H + +/* Keep includes the same across arches. */ +#include + +/* Caches aren't brain-dead on the s390. */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +#ifdef CONFIG_DEBUG_PAGEALLOC +void kernel_map_pages(struct page *page, int numpages, int enable); +#endif + +#endif /* _S390_CACHEFLUSH_H */ diff --git a/arch/s390/include/asm/ccwdev.h b/arch/s390/include/asm/ccwdev.h new file mode 100644 index 000000000000..ba007d8df941 --- /dev/null +++ b/arch/s390/include/asm/ccwdev.h @@ -0,0 +1,192 @@ +/* + * include/asm-s390/ccwdev.h + * include/asm-s390x/ccwdev.h + * + * Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Arnd Bergmann + * + * Interface for CCW device drivers + */ +#ifndef _S390_CCWDEV_H_ +#define _S390_CCWDEV_H_ + +#include +#include +#include + +/* structs from asm/cio.h */ +struct irb; +struct ccw1; +struct ccw_dev_id; + +/* simplified initializers for struct ccw_device: + * CCW_DEVICE and CCW_DEVICE_DEVTYPE initialize one + * entry in your MODULE_DEVICE_TABLE and set the match_flag correctly */ +#define CCW_DEVICE(cu, cum) \ + .cu_type=(cu), .cu_model=(cum), \ + .match_flags=(CCW_DEVICE_ID_MATCH_CU_TYPE \ + | (cum ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0)) + +#define CCW_DEVICE_DEVTYPE(cu, cum, dev, devm) \ + .cu_type=(cu), .cu_model=(cum), .dev_type=(dev), .dev_model=(devm),\ + .match_flags=CCW_DEVICE_ID_MATCH_CU_TYPE \ + | ((cum) ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0) \ + | CCW_DEVICE_ID_MATCH_DEVICE_TYPE \ + | ((devm) ? CCW_DEVICE_ID_MATCH_DEVICE_MODEL : 0) + +/* scan through an array of device ids and return the first + * entry that matches the device. + * + * the array must end with an entry containing zero match_flags + */ +static inline const struct ccw_device_id * +ccw_device_id_match(const struct ccw_device_id *array, + const struct ccw_device_id *match) +{ + const struct ccw_device_id *id = array; + + for (id = array; id->match_flags; id++) { + if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_TYPE) + && (id->cu_type != match->cu_type)) + continue; + + if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_MODEL) + && (id->cu_model != match->cu_model)) + continue; + + if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_TYPE) + && (id->dev_type != match->dev_type)) + continue; + + if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_MODEL) + && (id->dev_model != match->dev_model)) + continue; + + return id; + } + + return NULL; +} + +/** + * struct ccw_device - channel attached device + * @ccwlock: pointer to device lock + * @id: id of this device + * @drv: ccw driver for this device + * @dev: embedded device structure + * @online: online status of device + * @handler: interrupt handler + * + * @handler is a member of the device rather than the driver since a driver + * can have different interrupt handlers for different ccw devices + * (multi-subchannel drivers). + */ +struct ccw_device { + spinlock_t *ccwlock; +/* private: */ + struct ccw_device_private *private; /* cio private information */ +/* public: */ + struct ccw_device_id id; + struct ccw_driver *drv; + struct device dev; + int online; + void (*handler) (struct ccw_device *, unsigned long, struct irb *); +}; + + +/** + * struct ccw driver - device driver for channel attached devices + * @owner: owning module + * @ids: ids supported by this driver + * @probe: function called on probe + * @remove: function called on remove + * @set_online: called when setting device online + * @set_offline: called when setting device offline + * @notify: notify driver of device state changes + * @shutdown: called at device shutdown + * @driver: embedded device driver structure + * @name: device driver name + */ +struct ccw_driver { + struct module *owner; + struct ccw_device_id *ids; + int (*probe) (struct ccw_device *); + void (*remove) (struct ccw_device *); + int (*set_online) (struct ccw_device *); + int (*set_offline) (struct ccw_device *); + int (*notify) (struct ccw_device *, int); + void (*shutdown) (struct ccw_device *); + struct device_driver driver; + char *name; +}; + +extern struct ccw_device *get_ccwdev_by_busid(struct ccw_driver *cdrv, + const char *bus_id); + +/* devices drivers call these during module load and unload. + * When a driver is registered, its probe method is called + * when new devices for its type pop up */ +extern int ccw_driver_register (struct ccw_driver *driver); +extern void ccw_driver_unregister (struct ccw_driver *driver); + +struct ccw1; + +extern int ccw_device_set_options_mask(struct ccw_device *, unsigned long); +extern int ccw_device_set_options(struct ccw_device *, unsigned long); +extern void ccw_device_clear_options(struct ccw_device *, unsigned long); + +/* Allow for i/o completion notification after primary interrupt status. */ +#define CCWDEV_EARLY_NOTIFICATION 0x0001 +/* Report all interrupt conditions. */ +#define CCWDEV_REPORT_ALL 0x0002 +/* Try to perform path grouping. */ +#define CCWDEV_DO_PATHGROUP 0x0004 +/* Allow forced onlining of boxed devices. */ +#define CCWDEV_ALLOW_FORCE 0x0008 + +extern int ccw_device_start(struct ccw_device *, struct ccw1 *, + unsigned long, __u8, unsigned long); +extern int ccw_device_start_timeout(struct ccw_device *, struct ccw1 *, + unsigned long, __u8, unsigned long, int); +extern int ccw_device_start_key(struct ccw_device *, struct ccw1 *, + unsigned long, __u8, __u8, unsigned long); +extern int ccw_device_start_timeout_key(struct ccw_device *, struct ccw1 *, + unsigned long, __u8, __u8, + unsigned long, int); + + +extern int ccw_device_resume(struct ccw_device *); +extern int ccw_device_halt(struct ccw_device *, unsigned long); +extern int ccw_device_clear(struct ccw_device *, unsigned long); +int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw, + unsigned long intparm, u8 lpm, u8 key); +int ccw_device_tm_start_key(struct ccw_device *, struct tcw *, + unsigned long, u8, u8); +int ccw_device_tm_start_timeout_key(struct ccw_device *, struct tcw *, + unsigned long, u8, u8, int); +int ccw_device_tm_start(struct ccw_device *, struct tcw *, + unsigned long, u8); +int ccw_device_tm_start_timeout(struct ccw_device *, struct tcw *, + unsigned long, u8, int); +int ccw_device_tm_intrg(struct ccw_device *cdev); + +extern int ccw_device_set_online(struct ccw_device *cdev); +extern int ccw_device_set_offline(struct ccw_device *cdev); + + +extern struct ciw *ccw_device_get_ciw(struct ccw_device *, __u32 cmd); +extern __u8 ccw_device_get_path_mask(struct ccw_device *); +extern void ccw_device_get_id(struct ccw_device *, struct ccw_dev_id *); + +#define get_ccwdev_lock(x) (x)->ccwlock + +#define to_ccwdev(n) container_of(n, struct ccw_device, dev) +#define to_ccwdrv(n) container_of(n, struct ccw_driver, driver) + +extern struct ccw_device *ccw_device_probe_console(void); + +// FIXME: these have to go +extern int _ccw_device_get_subchannel_number(struct ccw_device *); + +extern void *ccw_device_get_chp_desc(struct ccw_device *, int); +#endif /* _S390_CCWDEV_H_ */ diff --git a/arch/s390/include/asm/ccwgroup.h b/arch/s390/include/asm/ccwgroup.h new file mode 100644 index 000000000000..a27f68985a79 --- /dev/null +++ b/arch/s390/include/asm/ccwgroup.h @@ -0,0 +1,69 @@ +#ifndef S390_CCWGROUP_H +#define S390_CCWGROUP_H + +struct ccw_device; +struct ccw_driver; + +/** + * struct ccwgroup_device - ccw group device + * @creator_id: unique number of the driver + * @state: online/offline state + * @count: number of attached slave devices + * @dev: embedded device structure + * @cdev: variable number of slave devices, allocated as needed + */ +struct ccwgroup_device { + unsigned long creator_id; + enum { + CCWGROUP_OFFLINE, + CCWGROUP_ONLINE, + } state; +/* private: */ + atomic_t onoff; + struct mutex reg_mutex; +/* public: */ + unsigned int count; + struct device dev; + struct ccw_device *cdev[0]; +}; + +/** + * struct ccwgroup_driver - driver for ccw group devices + * @owner: driver owner + * @name: driver name + * @max_slaves: maximum number of slave devices + * @driver_id: unique id + * @probe: function called on probe + * @remove: function called on remove + * @set_online: function called when device is set online + * @set_offline: function called when device is set offline + * @shutdown: function called when device is shut down + * @driver: embedded driver structure + */ +struct ccwgroup_driver { + struct module *owner; + char *name; + int max_slaves; + unsigned long driver_id; + + int (*probe) (struct ccwgroup_device *); + void (*remove) (struct ccwgroup_device *); + int (*set_online) (struct ccwgroup_device *); + int (*set_offline) (struct ccwgroup_device *); + void (*shutdown)(struct ccwgroup_device *); + + struct device_driver driver; +}; + +extern int ccwgroup_driver_register (struct ccwgroup_driver *cdriver); +extern void ccwgroup_driver_unregister (struct ccwgroup_driver *cdriver); +int ccwgroup_create_from_string(struct device *root, unsigned int creator_id, + struct ccw_driver *cdrv, int num_devices, + const char *buf); + +extern int ccwgroup_probe_ccwdev(struct ccw_device *cdev); +extern void ccwgroup_remove_ccwdev(struct ccw_device *cdev); + +#define to_ccwgroupdev(x) container_of((x), struct ccwgroup_device, dev) +#define to_ccwgroupdrv(x) container_of((x), struct ccwgroup_driver, driver) +#endif diff --git a/arch/s390/include/asm/checksum.h b/arch/s390/include/asm/checksum.h new file mode 100644 index 000000000000..d5a8e7c1477c --- /dev/null +++ b/arch/s390/include/asm/checksum.h @@ -0,0 +1,166 @@ +#ifndef _S390_CHECKSUM_H +#define _S390_CHECKSUM_H + +/* + * include/asm-s390/checksum.h + * S390 fast network checksum routines + * see also arch/S390/lib/checksum.c + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Ulrich Hild (first version) + * Martin Schwidefsky (heavily optimized CKSM version) + * D.J. Barrow (third attempt) + */ + +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +static inline __wsum +csum_partial(const void *buff, int len, __wsum sum) +{ + register unsigned long reg2 asm("2") = (unsigned long) buff; + register unsigned long reg3 asm("3") = (unsigned long) len; + + asm volatile( + "0: cksm %0,%1\n" /* do checksum on longs */ + " jo 0b\n" + : "+d" (sum), "+d" (reg2), "+d" (reg3) : : "cc", "memory"); + return sum; +} + +/* + * the same as csum_partial_copy, but copies from user space. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + * + * Copy from userspace and compute checksum. If we catch an exception + * then zero the rest of the buffer. + */ +static inline __wsum +csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, + int *err_ptr) +{ + int missing; + + missing = copy_from_user(dst, src, len); + if (missing) { + memset(dst + len - missing, 0, missing); + *err_ptr = -EFAULT; + } + + return csum_partial(dst, len, sum); +} + + +static inline __wsum +csum_partial_copy_nocheck (const void *src, void *dst, int len, __wsum sum) +{ + memcpy(dst,src,len); + return csum_partial(dst, len, sum); +} + +/* + * Fold a partial checksum without adding pseudo headers + */ +static inline __sum16 csum_fold(__wsum sum) +{ +#ifndef __s390x__ + register_pair rp; + + asm volatile( + " slr %N1,%N1\n" /* %0 = H L */ + " lr %1,%0\n" /* %0 = H L, %1 = H L 0 0 */ + " srdl %1,16\n" /* %0 = H L, %1 = 0 H L 0 */ + " alr %1,%N1\n" /* %0 = H L, %1 = L H L 0 */ + " alr %0,%1\n" /* %0 = H+L+C L+H */ + " srl %0,16\n" /* %0 = H+L+C */ + : "+&d" (sum), "=d" (rp) : : "cc"); +#else /* __s390x__ */ + asm volatile( + " sr 3,3\n" /* %0 = H*65536 + L */ + " lr 2,%0\n" /* %0 = H L, 2/3 = H L / 0 0 */ + " srdl 2,16\n" /* %0 = H L, 2/3 = 0 H / L 0 */ + " alr 2,3\n" /* %0 = H L, 2/3 = L H / L 0 */ + " alr %0,2\n" /* %0 = H+L+C L+H */ + " srl %0,16\n" /* %0 = H+L+C */ + : "+&d" (sum) : : "cc", "2", "3"); +#endif /* __s390x__ */ + return (__force __sum16) ~sum; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + * + */ +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + return csum_fold(csum_partial(iph, ihl*4, 0)); +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 32-bit checksum + */ +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, unsigned short proto, + __wsum sum) +{ + __u32 csum = (__force __u32)sum; + + csum += (__force __u32)saddr; + if (csum < (__force __u32)saddr) + csum++; + + csum += (__force __u32)daddr; + if (csum < (__force __u32)daddr) + csum++; + + csum += len + proto; + if (csum < len + proto) + csum++; + + return (__force __wsum)csum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ + +static inline __sum16 +csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#endif /* _S390_CHECKSUM_H */ + + diff --git a/arch/s390/include/asm/chpid.h b/arch/s390/include/asm/chpid.h new file mode 100644 index 000000000000..dfe3c7f3439a --- /dev/null +++ b/arch/s390/include/asm/chpid.h @@ -0,0 +1,56 @@ +/* + * drivers/s390/cio/chpid.h + * + * Copyright IBM Corp. 2007 + * Author(s): Peter Oberparleiter + */ + +#ifndef _ASM_S390_CHPID_H +#define _ASM_S390_CHPID_H _ASM_S390_CHPID_H + +#include +#include + +#define __MAX_CHPID 255 + +struct chp_id { + u8 reserved1; + u8 cssid; + u8 reserved2; + u8 id; +} __attribute__((packed)); + +#ifdef __KERNEL__ +#include + +static inline void chp_id_init(struct chp_id *chpid) +{ + memset(chpid, 0, sizeof(struct chp_id)); +} + +static inline int chp_id_is_equal(struct chp_id *a, struct chp_id *b) +{ + return (a->id == b->id) && (a->cssid == b->cssid); +} + +static inline void chp_id_next(struct chp_id *chpid) +{ + if (chpid->id < __MAX_CHPID) + chpid->id++; + else { + chpid->id = 0; + chpid->cssid++; + } +} + +static inline int chp_id_is_valid(struct chp_id *chpid) +{ + return (chpid->cssid <= __MAX_CSSID); +} + + +#define chp_id_for_each(c) \ + for (chp_id_init(c); chp_id_is_valid(c); chp_id_next(c)) +#endif /* __KERNEL */ + +#endif /* _ASM_S390_CHPID_H */ diff --git a/arch/s390/include/asm/chsc.h b/arch/s390/include/asm/chsc.h new file mode 100644 index 000000000000..d38d0cf62d4b --- /dev/null +++ b/arch/s390/include/asm/chsc.h @@ -0,0 +1,127 @@ +/* + * ioctl interface for /dev/chsc + * + * Copyright 2008 IBM Corp. + * Author(s): Cornelia Huck + */ + +#ifndef _ASM_CHSC_H +#define _ASM_CHSC_H + +#include +#include + +struct chsc_async_header { + __u16 length; + __u16 code; + __u32 cmd_dependend; + __u32 key : 4; + __u32 : 28; + struct subchannel_id sid; +} __attribute__ ((packed)); + +struct chsc_async_area { + struct chsc_async_header header; + __u8 data[PAGE_SIZE - 16 /* size of chsc_async_header */]; +} __attribute__ ((packed)); + + +struct chsc_response_struct { + __u16 length; + __u16 code; + __u32 parms; + __u8 data[PAGE_SIZE - 8]; +} __attribute__ ((packed)); + +struct chsc_chp_cd { + struct chp_id chpid; + int m; + int fmt; + struct chsc_response_struct cpcb; +}; + +struct chsc_cu_cd { + __u16 cun; + __u8 cssid; + int m; + int fmt; + struct chsc_response_struct cucb; +}; + +struct chsc_sch_cud { + struct subchannel_id schid; + int fmt; + struct chsc_response_struct scub; +}; + +struct conf_id { + int m; + __u8 cssid; + __u8 ssid; +}; + +struct chsc_conf_info { + struct conf_id id; + int fmt; + struct chsc_response_struct scid; +}; + +struct ccl_parm_chpid { + int m; + struct chp_id chp; +}; + +struct ccl_parm_cssids { + __u8 f_cssid; + __u8 l_cssid; +}; + +struct chsc_comp_list { + struct { + enum { + CCL_CU_ON_CHP = 1, + CCL_CHP_TYPE_CAP = 2, + CCL_CSS_IMG = 4, + CCL_CSS_IMG_CONF_CHAR = 5, + CCL_IOP_CHP = 6, + } ctype; + int fmt; + struct ccl_parm_chpid chpid; + struct ccl_parm_cssids cssids; + } req; + struct chsc_response_struct sccl; +}; + +struct chsc_dcal { + struct { + enum { + DCAL_CSS_IID_PN = 4, + } atype; + __u32 list_parm[2]; + int fmt; + } req; + struct chsc_response_struct sdcal; +}; + +struct chsc_cpd_info { + struct chp_id chpid; + int m; + int fmt; + int rfmt; + int c; + struct chsc_response_struct chpdb; +}; + +#define CHSC_IOCTL_MAGIC 'c' + +#define CHSC_START _IOWR(CHSC_IOCTL_MAGIC, 0x81, struct chsc_async_area) +#define CHSC_INFO_CHANNEL_PATH _IOWR(CHSC_IOCTL_MAGIC, 0x82, \ + struct chsc_chp_cd) +#define CHSC_INFO_CU _IOWR(CHSC_IOCTL_MAGIC, 0x83, struct chsc_cu_cd) +#define CHSC_INFO_SCH_CU _IOWR(CHSC_IOCTL_MAGIC, 0x84, struct chsc_sch_cud) +#define CHSC_INFO_CI _IOWR(CHSC_IOCTL_MAGIC, 0x85, struct chsc_conf_info) +#define CHSC_INFO_CCL _IOWR(CHSC_IOCTL_MAGIC, 0x86, struct chsc_comp_list) +#define CHSC_INFO_CPD _IOWR(CHSC_IOCTL_MAGIC, 0x87, struct chsc_cpd_info) +#define CHSC_INFO_DCAL _IOWR(CHSC_IOCTL_MAGIC, 0x88, struct chsc_dcal) + +#endif diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h new file mode 100644 index 000000000000..6dccb071aec3 --- /dev/null +++ b/arch/s390/include/asm/cio.h @@ -0,0 +1,514 @@ +/* + * include/asm-s390/cio.h + * include/asm-s390x/cio.h + * + * Common interface for I/O on S/390 + */ +#ifndef _ASM_S390_CIO_H_ +#define _ASM_S390_CIO_H_ + +#include +#include + +#ifdef __KERNEL__ + +#define LPM_ANYPATH 0xff +#define __MAX_CSSID 0 + +/** + * struct cmd_scsw - command-mode subchannel status word + * @key: subchannel key + * @sctl: suspend control + * @eswf: esw format + * @cc: deferred condition code + * @fmt: format + * @pfch: prefetch + * @isic: initial-status interruption control + * @alcc: address-limit checking control + * @ssi: suppress-suspended interruption + * @zcc: zero condition code + * @ectl: extended control + * @pno: path not operational + * @res: reserved + * @fctl: function control + * @actl: activity control + * @stctl: status control + * @cpa: channel program address + * @dstat: device status + * @cstat: subchannel status + * @count: residual count + */ +struct cmd_scsw { + __u32 key : 4; + __u32 sctl : 1; + __u32 eswf : 1; + __u32 cc : 2; + __u32 fmt : 1; + __u32 pfch : 1; + __u32 isic : 1; + __u32 alcc : 1; + __u32 ssi : 1; + __u32 zcc : 1; + __u32 ectl : 1; + __u32 pno : 1; + __u32 res : 1; + __u32 fctl : 3; + __u32 actl : 7; + __u32 stctl : 5; + __u32 cpa; + __u32 dstat : 8; + __u32 cstat : 8; + __u32 count : 16; +} __attribute__ ((packed)); + +/** + * struct tm_scsw - transport-mode subchannel status word + * @key: subchannel key + * @eswf: esw format + * @cc: deferred condition code + * @fmt: format + * @x: IRB-format control + * @q: interrogate-complete + * @ectl: extended control + * @pno: path not operational + * @fctl: function control + * @actl: activity control + * @stctl: status control + * @tcw: TCW address + * @dstat: device status + * @cstat: subchannel status + * @fcxs: FCX status + * @schxs: subchannel-extended status + */ +struct tm_scsw { + u32 key:4; + u32 :1; + u32 eswf:1; + u32 cc:2; + u32 fmt:3; + u32 x:1; + u32 q:1; + u32 :1; + u32 ectl:1; + u32 pno:1; + u32 :1; + u32 fctl:3; + u32 actl:7; + u32 stctl:5; + u32 tcw; + u32 dstat:8; + u32 cstat:8; + u32 fcxs:8; + u32 schxs:8; +} __attribute__ ((packed)); + +/** + * union scsw - subchannel status word + * @cmd: command-mode SCSW + * @tm: transport-mode SCSW + */ +union scsw { + struct cmd_scsw cmd; + struct tm_scsw tm; +} __attribute__ ((packed)); + +int scsw_is_tm(union scsw *scsw); +u32 scsw_key(union scsw *scsw); +u32 scsw_eswf(union scsw *scsw); +u32 scsw_cc(union scsw *scsw); +u32 scsw_ectl(union scsw *scsw); +u32 scsw_pno(union scsw *scsw); +u32 scsw_fctl(union scsw *scsw); +u32 scsw_actl(union scsw *scsw); +u32 scsw_stctl(union scsw *scsw); +u32 scsw_dstat(union scsw *scsw); +u32 scsw_cstat(union scsw *scsw); +int scsw_is_solicited(union scsw *scsw); +int scsw_is_valid_key(union scsw *scsw); +int scsw_is_valid_eswf(union scsw *scsw); +int scsw_is_valid_cc(union scsw *scsw); +int scsw_is_valid_ectl(union scsw *scsw); +int scsw_is_valid_pno(union scsw *scsw); +int scsw_is_valid_fctl(union scsw *scsw); +int scsw_is_valid_actl(union scsw *scsw); +int scsw_is_valid_stctl(union scsw *scsw); +int scsw_is_valid_dstat(union scsw *scsw); +int scsw_is_valid_cstat(union scsw *scsw); +int scsw_cmd_is_valid_key(union scsw *scsw); +int scsw_cmd_is_valid_sctl(union scsw *scsw); +int scsw_cmd_is_valid_eswf(union scsw *scsw); +int scsw_cmd_is_valid_cc(union scsw *scsw); +int scsw_cmd_is_valid_fmt(union scsw *scsw); +int scsw_cmd_is_valid_pfch(union scsw *scsw); +int scsw_cmd_is_valid_isic(union scsw *scsw); +int scsw_cmd_is_valid_alcc(union scsw *scsw); +int scsw_cmd_is_valid_ssi(union scsw *scsw); +int scsw_cmd_is_valid_zcc(union scsw *scsw); +int scsw_cmd_is_valid_ectl(union scsw *scsw); +int scsw_cmd_is_valid_pno(union scsw *scsw); +int scsw_cmd_is_valid_fctl(union scsw *scsw); +int scsw_cmd_is_valid_actl(union scsw *scsw); +int scsw_cmd_is_valid_stctl(union scsw *scsw); +int scsw_cmd_is_valid_dstat(union scsw *scsw); +int scsw_cmd_is_valid_cstat(union scsw *scsw); +int scsw_cmd_is_solicited(union scsw *scsw); +int scsw_tm_is_valid_key(union scsw *scsw); +int scsw_tm_is_valid_eswf(union scsw *scsw); +int scsw_tm_is_valid_cc(union scsw *scsw); +int scsw_tm_is_valid_fmt(union scsw *scsw); +int scsw_tm_is_valid_x(union scsw *scsw); +int scsw_tm_is_valid_q(union scsw *scsw); +int scsw_tm_is_valid_ectl(union scsw *scsw); +int scsw_tm_is_valid_pno(union scsw *scsw); +int scsw_tm_is_valid_fctl(union scsw *scsw); +int scsw_tm_is_valid_actl(union scsw *scsw); +int scsw_tm_is_valid_stctl(union scsw *scsw); +int scsw_tm_is_valid_dstat(union scsw *scsw); +int scsw_tm_is_valid_cstat(union scsw *scsw); +int scsw_tm_is_valid_fcxs(union scsw *scsw); +int scsw_tm_is_valid_schxs(union scsw *scsw); +int scsw_tm_is_solicited(union scsw *scsw); + +#define SCSW_FCTL_CLEAR_FUNC 0x1 +#define SCSW_FCTL_HALT_FUNC 0x2 +#define SCSW_FCTL_START_FUNC 0x4 + +#define SCSW_ACTL_SUSPENDED 0x1 +#define SCSW_ACTL_DEVACT 0x2 +#define SCSW_ACTL_SCHACT 0x4 +#define SCSW_ACTL_CLEAR_PEND 0x8 +#define SCSW_ACTL_HALT_PEND 0x10 +#define SCSW_ACTL_START_PEND 0x20 +#define SCSW_ACTL_RESUME_PEND 0x40 + +#define SCSW_STCTL_STATUS_PEND 0x1 +#define SCSW_STCTL_SEC_STATUS 0x2 +#define SCSW_STCTL_PRIM_STATUS 0x4 +#define SCSW_STCTL_INTER_STATUS 0x8 +#define SCSW_STCTL_ALERT_STATUS 0x10 + +#define DEV_STAT_ATTENTION 0x80 +#define DEV_STAT_STAT_MOD 0x40 +#define DEV_STAT_CU_END 0x20 +#define DEV_STAT_BUSY 0x10 +#define DEV_STAT_CHN_END 0x08 +#define DEV_STAT_DEV_END 0x04 +#define DEV_STAT_UNIT_CHECK 0x02 +#define DEV_STAT_UNIT_EXCEP 0x01 + +#define SCHN_STAT_PCI 0x80 +#define SCHN_STAT_INCORR_LEN 0x40 +#define SCHN_STAT_PROG_CHECK 0x20 +#define SCHN_STAT_PROT_CHECK 0x10 +#define SCHN_STAT_CHN_DATA_CHK 0x08 +#define SCHN_STAT_CHN_CTRL_CHK 0x04 +#define SCHN_STAT_INTF_CTRL_CHK 0x02 +#define SCHN_STAT_CHAIN_CHECK 0x01 + +/* + * architectured values for first sense byte + */ +#define SNS0_CMD_REJECT 0x80 +#define SNS_CMD_REJECT SNS0_CMD_REJEC +#define SNS0_INTERVENTION_REQ 0x40 +#define SNS0_BUS_OUT_CHECK 0x20 +#define SNS0_EQUIPMENT_CHECK 0x10 +#define SNS0_DATA_CHECK 0x08 +#define SNS0_OVERRUN 0x04 +#define SNS0_INCOMPL_DOMAIN 0x01 + +/* + * architectured values for second sense byte + */ +#define SNS1_PERM_ERR 0x80 +#define SNS1_INV_TRACK_FORMAT 0x40 +#define SNS1_EOC 0x20 +#define SNS1_MESSAGE_TO_OPER 0x10 +#define SNS1_NO_REC_FOUND 0x08 +#define SNS1_FILE_PROTECTED 0x04 +#define SNS1_WRITE_INHIBITED 0x02 +#define SNS1_INPRECISE_END 0x01 + +/* + * architectured values for third sense byte + */ +#define SNS2_REQ_INH_WRITE 0x80 +#define SNS2_CORRECTABLE 0x40 +#define SNS2_FIRST_LOG_ERR 0x20 +#define SNS2_ENV_DATA_PRESENT 0x10 +#define SNS2_INPRECISE_END 0x04 + +/** + * struct ccw1 - channel command word + * @cmd_code: command code + * @flags: flags, like IDA adressing, etc. + * @count: byte count + * @cda: data address + * + * The ccw is the basic structure to build channel programs that perform + * operations with the device or the control unit. Only Format-1 channel + * command words are supported. + */ +struct ccw1 { + __u8 cmd_code; + __u8 flags; + __u16 count; + __u32 cda; +} __attribute__ ((packed,aligned(8))); + +#define CCW_FLAG_DC 0x80 +#define CCW_FLAG_CC 0x40 +#define CCW_FLAG_SLI 0x20 +#define CCW_FLAG_SKIP 0x10 +#define CCW_FLAG_PCI 0x08 +#define CCW_FLAG_IDA 0x04 +#define CCW_FLAG_SUSPEND 0x02 + +#define CCW_CMD_READ_IPL 0x02 +#define CCW_CMD_NOOP 0x03 +#define CCW_CMD_BASIC_SENSE 0x04 +#define CCW_CMD_TIC 0x08 +#define CCW_CMD_STLCK 0x14 +#define CCW_CMD_SENSE_PGID 0x34 +#define CCW_CMD_SUSPEND_RECONN 0x5B +#define CCW_CMD_RDC 0x64 +#define CCW_CMD_RELEASE 0x94 +#define CCW_CMD_SET_PGID 0xAF +#define CCW_CMD_SENSE_ID 0xE4 +#define CCW_CMD_DCTL 0xF3 + +#define SENSE_MAX_COUNT 0x20 + +/** + * struct erw - extended report word + * @res0: reserved + * @auth: authorization check + * @pvrf: path-verification-required flag + * @cpt: channel-path timeout + * @fsavf: failing storage address validity flag + * @cons: concurrent sense + * @scavf: secondary ccw address validity flag + * @fsaf: failing storage address format + * @scnt: sense count, if @cons == %1 + * @res16: reserved + */ +struct erw { + __u32 res0 : 3; + __u32 auth : 1; + __u32 pvrf : 1; + __u32 cpt : 1; + __u32 fsavf : 1; + __u32 cons : 1; + __u32 scavf : 1; + __u32 fsaf : 1; + __u32 scnt : 6; + __u32 res16 : 16; +} __attribute__ ((packed)); + +/** + * struct sublog - subchannel logout area + * @res0: reserved + * @esf: extended status flags + * @lpum: last path used mask + * @arep: ancillary report + * @fvf: field-validity flags + * @sacc: storage access code + * @termc: termination code + * @devsc: device-status check + * @serr: secondary error + * @ioerr: i/o-error alert + * @seqc: sequence code + */ +struct sublog { + __u32 res0 : 1; + __u32 esf : 7; + __u32 lpum : 8; + __u32 arep : 1; + __u32 fvf : 5; + __u32 sacc : 2; + __u32 termc : 2; + __u32 devsc : 1; + __u32 serr : 1; + __u32 ioerr : 1; + __u32 seqc : 3; +} __attribute__ ((packed)); + +/** + * struct esw0 - Format 0 Extended Status Word (ESW) + * @sublog: subchannel logout + * @erw: extended report word + * @faddr: failing storage address + * @saddr: secondary ccw address + */ +struct esw0 { + struct sublog sublog; + struct erw erw; + __u32 faddr[2]; + __u32 saddr; +} __attribute__ ((packed)); + +/** + * struct esw1 - Format 1 Extended Status Word (ESW) + * @zero0: reserved zeros + * @lpum: last path used mask + * @zero16: reserved zeros + * @erw: extended report word + * @zeros: three fullwords of zeros + */ +struct esw1 { + __u8 zero0; + __u8 lpum; + __u16 zero16; + struct erw erw; + __u32 zeros[3]; +} __attribute__ ((packed)); + +/** + * struct esw2 - Format 2 Extended Status Word (ESW) + * @zero0: reserved zeros + * @lpum: last path used mask + * @dcti: device-connect-time interval + * @erw: extended report word + * @zeros: three fullwords of zeros + */ +struct esw2 { + __u8 zero0; + __u8 lpum; + __u16 dcti; + struct erw erw; + __u32 zeros[3]; +} __attribute__ ((packed)); + +/** + * struct esw3 - Format 3 Extended Status Word (ESW) + * @zero0: reserved zeros + * @lpum: last path used mask + * @res: reserved + * @erw: extended report word + * @zeros: three fullwords of zeros + */ +struct esw3 { + __u8 zero0; + __u8 lpum; + __u16 res; + struct erw erw; + __u32 zeros[3]; +} __attribute__ ((packed)); + +/** + * struct irb - interruption response block + * @scsw: subchannel status word + * @esw: extened status word, 4 formats + * @ecw: extended control word + * + * The irb that is handed to the device driver when an interrupt occurs. For + * solicited interrupts, the common I/O layer already performs checks whether + * a field is valid; a field not being valid is always passed as %0. + * If a unit check occured, @ecw may contain sense data; this is retrieved + * by the common I/O layer itself if the device doesn't support concurrent + * sense (so that the device driver never needs to perform basic sene itself). + * For unsolicited interrupts, the irb is passed as-is (expect for sense data, + * if applicable). + */ +struct irb { + union scsw scsw; + union { + struct esw0 esw0; + struct esw1 esw1; + struct esw2 esw2; + struct esw3 esw3; + } esw; + __u8 ecw[32]; +} __attribute__ ((packed,aligned(4))); + +/** + * struct ciw - command information word (CIW) layout + * @et: entry type + * @reserved: reserved bits + * @ct: command type + * @cmd: command code + * @count: command count + */ +struct ciw { + __u32 et : 2; + __u32 reserved : 2; + __u32 ct : 4; + __u32 cmd : 8; + __u32 count : 16; +} __attribute__ ((packed)); + +#define CIW_TYPE_RCD 0x0 /* read configuration data */ +#define CIW_TYPE_SII 0x1 /* set interface identifier */ +#define CIW_TYPE_RNI 0x2 /* read node identifier */ + +/* + * Flags used as input parameters for do_IO() + */ +#define DOIO_ALLOW_SUSPEND 0x0001 /* allow for channel prog. suspend */ +#define DOIO_DENY_PREFETCH 0x0002 /* don't allow for CCW prefetch */ +#define DOIO_SUPPRESS_INTER 0x0004 /* suppress intermediate inter. */ + /* ... for suspended CCWs */ +/* Device or subchannel gone. */ +#define CIO_GONE 0x0001 +/* No path to device. */ +#define CIO_NO_PATH 0x0002 +/* Device has appeared. */ +#define CIO_OPER 0x0004 +/* Sick revalidation of device. */ +#define CIO_REVALIDATE 0x0008 + +/** + * struct ccw_dev_id - unique identifier for ccw devices + * @ssid: subchannel set id + * @devno: device number + * + * This structure is not directly based on any hardware structure. The + * hardware identifies a device by its device number and its subchannel, + * which is in turn identified by its id. In order to get a unique identifier + * for ccw devices across subchannel sets, @struct ccw_dev_id has been + * introduced. + */ +struct ccw_dev_id { + u8 ssid; + u16 devno; +}; + +/** + * ccw_device_id_is_equal() - compare two ccw_dev_ids + * @dev_id1: a ccw_dev_id + * @dev_id2: another ccw_dev_id + * Returns: + * %1 if the two structures are equal field-by-field, + * %0 if not. + * Context: + * any + */ +static inline int ccw_dev_id_is_equal(struct ccw_dev_id *dev_id1, + struct ccw_dev_id *dev_id2) +{ + if ((dev_id1->ssid == dev_id2->ssid) && + (dev_id1->devno == dev_id2->devno)) + return 1; + return 0; +} + +extern void wait_cons_dev(void); + +extern void css_schedule_reprobe(void); + +extern void reipl_ccw_dev(struct ccw_dev_id *id); + +struct cio_iplinfo { + u16 devno; + int is_qdio; +}; + +extern int cio_get_iplinfo(struct cio_iplinfo *iplinfo); + +/* Function from drivers/s390/cio/chsc.c */ +int chsc_sstpc(void *page, unsigned int op, u16 ctrl); +int chsc_sstpi(void *page, void *result, size_t size); + +#endif + +#endif diff --git a/arch/s390/include/asm/cmb.h b/arch/s390/include/asm/cmb.h new file mode 100644 index 000000000000..50196857d27a --- /dev/null +++ b/arch/s390/include/asm/cmb.h @@ -0,0 +1,58 @@ +#ifndef S390_CMB_H +#define S390_CMB_H +/** + * struct cmbdata - channel measurement block data for user space + * @size: size of the stored data + * @elapsed_time: time since last sampling + * @ssch_rsch_count: number of ssch and rsch + * @sample_count: number of samples + * @device_connect_time: time of device connect + * @function_pending_time: time of function pending + * @device_disconnect_time: time of device disconnect + * @control_unit_queuing_time: time of control unit queuing + * @device_active_only_time: time of device active only + * @device_busy_time: time of device busy (ext. format) + * @initial_command_response_time: initial command response time (ext. format) + * + * All values are stored as 64 bit for simplicity, especially + * in 32 bit emulation mode. All time values are normalized to + * nanoseconds. + * Currently, two formats are known, which differ by the size of + * this structure, i.e. the last two members are only set when + * the extended channel measurement facility (first shipped in + * z990 machines) is activated. + * Potentially, more fields could be added, which would result in a + * new ioctl number. + */ +struct cmbdata { + __u64 size; + __u64 elapsed_time; + /* basic and exended format: */ + __u64 ssch_rsch_count; + __u64 sample_count; + __u64 device_connect_time; + __u64 function_pending_time; + __u64 device_disconnect_time; + __u64 control_unit_queuing_time; + __u64 device_active_only_time; + /* extended format only: */ + __u64 device_busy_time; + __u64 initial_command_response_time; +}; + +/* enable channel measurement */ +#define BIODASDCMFENABLE _IO(DASD_IOCTL_LETTER, 32) +/* enable channel measurement */ +#define BIODASDCMFDISABLE _IO(DASD_IOCTL_LETTER, 33) +/* read channel measurement data */ +#define BIODASDREADALLCMB _IOWR(DASD_IOCTL_LETTER, 33, struct cmbdata) + +#ifdef __KERNEL__ +struct ccw_device; +extern int enable_cmf(struct ccw_device *cdev); +extern int disable_cmf(struct ccw_device *cdev); +extern u64 cmf_read(struct ccw_device *cdev, int index); +extern int cmf_readall(struct ccw_device *cdev, struct cmbdata *data); + +#endif /* __KERNEL__ */ +#endif /* S390_CMB_H */ diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h new file mode 100644 index 000000000000..de065b32381a --- /dev/null +++ b/arch/s390/include/asm/compat.h @@ -0,0 +1,233 @@ +#ifndef _ASM_S390X_COMPAT_H +#define _ASM_S390X_COMPAT_H +/* + * Architecture specific compatibility types + */ +#include +#include + +#define PSW32_MASK_PER 0x40000000UL +#define PSW32_MASK_DAT 0x04000000UL +#define PSW32_MASK_IO 0x02000000UL +#define PSW32_MASK_EXT 0x01000000UL +#define PSW32_MASK_KEY 0x00F00000UL +#define PSW32_MASK_MCHECK 0x00040000UL +#define PSW32_MASK_WAIT 0x00020000UL +#define PSW32_MASK_PSTATE 0x00010000UL +#define PSW32_MASK_ASC 0x0000C000UL +#define PSW32_MASK_CC 0x00003000UL +#define PSW32_MASK_PM 0x00000f00UL + +#define PSW32_ADDR_AMODE31 0x80000000UL +#define PSW32_ADDR_INSN 0x7FFFFFFFUL + +#define PSW32_BASE_BITS 0x00080000UL + +#define PSW32_ASC_PRIMARY 0x00000000UL +#define PSW32_ASC_ACCREG 0x00004000UL +#define PSW32_ASC_SECONDARY 0x00008000UL +#define PSW32_ASC_HOME 0x0000C000UL + +#define PSW32_MASK_MERGE(CURRENT,NEW) \ + (((CURRENT) & ~(PSW32_MASK_CC|PSW32_MASK_PM)) | \ + ((NEW) & (PSW32_MASK_CC|PSW32_MASK_PM))) + +extern long psw32_user_bits; + +#define COMPAT_USER_HZ 100 + +typedef u32 compat_size_t; +typedef s32 compat_ssize_t; +typedef s32 compat_time_t; +typedef s32 compat_clock_t; +typedef s32 compat_pid_t; +typedef u16 __compat_uid_t; +typedef u16 __compat_gid_t; +typedef u32 __compat_uid32_t; +typedef u32 __compat_gid32_t; +typedef u16 compat_mode_t; +typedef u32 compat_ino_t; +typedef u16 compat_dev_t; +typedef s32 compat_off_t; +typedef s64 compat_loff_t; +typedef u16 compat_nlink_t; +typedef u16 compat_ipc_pid_t; +typedef s32 compat_daddr_t; +typedef u32 compat_caddr_t; +typedef __kernel_fsid_t compat_fsid_t; +typedef s32 compat_key_t; +typedef s32 compat_timer_t; + +typedef s32 compat_int_t; +typedef s32 compat_long_t; +typedef s64 compat_s64; +typedef u32 compat_uint_t; +typedef u32 compat_ulong_t; +typedef u64 compat_u64; + +struct compat_timespec { + compat_time_t tv_sec; + s32 tv_nsec; +}; + +struct compat_timeval { + compat_time_t tv_sec; + s32 tv_usec; +}; + +struct compat_stat { + compat_dev_t st_dev; + u16 __pad1; + compat_ino_t st_ino; + compat_mode_t st_mode; + compat_nlink_t st_nlink; + __compat_uid_t st_uid; + __compat_gid_t st_gid; + compat_dev_t st_rdev; + u16 __pad2; + u32 st_size; + u32 st_blksize; + u32 st_blocks; + u32 st_atime; + u32 st_atime_nsec; + u32 st_mtime; + u32 st_mtime_nsec; + u32 st_ctime; + u32 st_ctime_nsec; + u32 __unused4; + u32 __unused5; +}; + +struct compat_flock { + short l_type; + short l_whence; + compat_off_t l_start; + compat_off_t l_len; + compat_pid_t l_pid; +}; + +#define F_GETLK64 12 +#define F_SETLK64 13 +#define F_SETLKW64 14 + +struct compat_flock64 { + short l_type; + short l_whence; + compat_loff_t l_start; + compat_loff_t l_len; + compat_pid_t l_pid; +}; + +struct compat_statfs { + s32 f_type; + s32 f_bsize; + s32 f_blocks; + s32 f_bfree; + s32 f_bavail; + s32 f_files; + s32 f_ffree; + compat_fsid_t f_fsid; + s32 f_namelen; + s32 f_frsize; + s32 f_spare[6]; +}; + +#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff +#define COMPAT_RLIM_INFINITY 0xffffffff + +typedef u32 compat_old_sigset_t; /* at least 32 bits */ + +#define _COMPAT_NSIG 64 +#define _COMPAT_NSIG_BPW 32 + +typedef u32 compat_sigset_word; + +#define COMPAT_OFF_T_MAX 0x7fffffff +#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL + +/* + * A pointer passed in from user mode. This should not + * be used for syscall parameters, just declare them + * as pointers because the syscall entry code will have + * appropriately converted them already. + */ +typedef u32 compat_uptr_t; + +static inline void __user *compat_ptr(compat_uptr_t uptr) +{ + return (void __user *)(unsigned long)(uptr & 0x7fffffffUL); +} + +static inline compat_uptr_t ptr_to_compat(void __user *uptr) +{ + return (u32)(unsigned long)uptr; +} + +static inline void __user *compat_alloc_user_space(long len) +{ + unsigned long stack; + + stack = KSTK_ESP(current); + if (test_thread_flag(TIF_31BIT)) + stack &= 0x7fffffffUL; + return (void __user *) (stack - len); +} + +struct compat_ipc64_perm { + compat_key_t key; + __compat_uid32_t uid; + __compat_gid32_t gid; + __compat_uid32_t cuid; + __compat_gid32_t cgid; + compat_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned int __unused1; + unsigned int __unused2; +}; + +struct compat_semid64_ds { + struct compat_ipc64_perm sem_perm; + compat_time_t sem_otime; + compat_ulong_t __pad1; + compat_time_t sem_ctime; + compat_ulong_t __pad2; + compat_ulong_t sem_nsems; + compat_ulong_t __unused1; + compat_ulong_t __unused2; +}; + +struct compat_msqid64_ds { + struct compat_ipc64_perm msg_perm; + compat_time_t msg_stime; + compat_ulong_t __pad1; + compat_time_t msg_rtime; + compat_ulong_t __pad2; + compat_time_t msg_ctime; + compat_ulong_t __pad3; + compat_ulong_t msg_cbytes; + compat_ulong_t msg_qnum; + compat_ulong_t msg_qbytes; + compat_pid_t msg_lspid; + compat_pid_t msg_lrpid; + compat_ulong_t __unused1; + compat_ulong_t __unused2; +}; + +struct compat_shmid64_ds { + struct compat_ipc64_perm shm_perm; + compat_size_t shm_segsz; + compat_time_t shm_atime; + compat_ulong_t __pad1; + compat_time_t shm_dtime; + compat_ulong_t __pad2; + compat_time_t shm_ctime; + compat_ulong_t __pad3; + compat_pid_t shm_cpid; + compat_pid_t shm_lpid; + compat_ulong_t shm_nattch; + compat_ulong_t __unused1; + compat_ulong_t __unused2; +}; +#endif /* _ASM_S390X_COMPAT_H */ diff --git a/arch/s390/include/asm/cpcmd.h b/arch/s390/include/asm/cpcmd.h new file mode 100644 index 000000000000..48a9eab16429 --- /dev/null +++ b/arch/s390/include/asm/cpcmd.h @@ -0,0 +1,34 @@ +/* + * arch/s390/kernel/cpcmd.h + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), + * Christian Borntraeger (cborntra@de.ibm.com), + */ + +#ifndef _ASM_S390_CPCMD_H +#define _ASM_S390_CPCMD_H + +/* + * the lowlevel function for cpcmd + * the caller of __cpcmd has to ensure that the response buffer is below 2 GB + */ +extern int __cpcmd(const char *cmd, char *response, int rlen, int *response_code); + +/* + * cpcmd is the in-kernel interface for issuing CP commands + * + * cmd: null-terminated command string, max 240 characters + * response: response buffer for VM's textual response + * rlen: size of the response buffer, cpcmd will not exceed this size + * but will cap the output, if its too large. Everything that + * did not fit into the buffer will be silently dropped + * response_code: return pointer for VM's error code + * return value: the size of the response. The caller can check if the buffer + * was large enough by comparing the return value and rlen + * NOTE: If the response buffer is not below 2 GB, cpcmd can sleep + */ +extern int cpcmd(const char *cmd, char *response, int rlen, int *response_code); + +#endif /* _ASM_S390_CPCMD_H */ diff --git a/arch/s390/include/asm/cpu.h b/arch/s390/include/asm/cpu.h new file mode 100644 index 000000000000..e5a6a9ba3adf --- /dev/null +++ b/arch/s390/include/asm/cpu.h @@ -0,0 +1,33 @@ +/* + * include/asm-s390/cpu.h + * + * Copyright IBM Corp. 2007 + * Author(s): Heiko Carstens + */ + +#ifndef _ASM_S390_CPU_H_ +#define _ASM_S390_CPU_H_ + +#include +#include +#include + +struct s390_idle_data { + spinlock_t lock; + unsigned int in_idle; + unsigned long long idle_count; + unsigned long long idle_enter; + unsigned long long idle_time; +}; + +DECLARE_PER_CPU(struct s390_idle_data, s390_idle); + +void s390_idle_leave(void); + +static inline void s390_idle_check(void) +{ + if ((&__get_cpu_var(s390_idle))->in_idle) + s390_idle_leave(); +} + +#endif /* _ASM_S390_CPU_H_ */ diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h new file mode 100644 index 000000000000..133ce054fc89 --- /dev/null +++ b/arch/s390/include/asm/cputime.h @@ -0,0 +1,177 @@ +/* + * include/asm-s390/cputime.h + * + * (C) Copyright IBM Corp. 2004 + * + * Author: Martin Schwidefsky + */ + +#ifndef _S390_CPUTIME_H +#define _S390_CPUTIME_H + +#include + +/* We want to use micro-second resolution. */ + +typedef unsigned long long cputime_t; +typedef unsigned long long cputime64_t; + +#ifndef __s390x__ + +static inline unsigned int +__div(unsigned long long n, unsigned int base) +{ + register_pair rp; + + rp.pair = n >> 1; + asm ("dr %0,%1" : "+d" (rp) : "d" (base >> 1)); + return rp.subreg.odd; +} + +#else /* __s390x__ */ + +static inline unsigned int +__div(unsigned long long n, unsigned int base) +{ + return n / base; +} + +#endif /* __s390x__ */ + +#define cputime_zero (0ULL) +#define cputime_max ((~0UL >> 1) - 1) +#define cputime_add(__a, __b) ((__a) + (__b)) +#define cputime_sub(__a, __b) ((__a) - (__b)) +#define cputime_div(__a, __n) ({ \ + unsigned long long __div = (__a); \ + do_div(__div,__n); \ + __div; \ +}) +#define cputime_halve(__a) ((__a) >> 1) +#define cputime_eq(__a, __b) ((__a) == (__b)) +#define cputime_gt(__a, __b) ((__a) > (__b)) +#define cputime_ge(__a, __b) ((__a) >= (__b)) +#define cputime_lt(__a, __b) ((__a) < (__b)) +#define cputime_le(__a, __b) ((__a) <= (__b)) +#define cputime_to_jiffies(__ct) (__div((__ct), 1000000 / HZ)) +#define cputime_to_scaled(__ct) (__ct) +#define jiffies_to_cputime(__hz) ((cputime_t)(__hz) * (1000000 / HZ)) + +#define cputime64_zero (0ULL) +#define cputime64_add(__a, __b) ((__a) + (__b)) +#define cputime_to_cputime64(__ct) (__ct) + +static inline u64 +cputime64_to_jiffies64(cputime64_t cputime) +{ + do_div(cputime, 1000000 / HZ); + return cputime; +} + +/* + * Convert cputime to milliseconds and back. + */ +static inline unsigned int +cputime_to_msecs(const cputime_t cputime) +{ + return __div(cputime, 1000); +} + +static inline cputime_t +msecs_to_cputime(const unsigned int m) +{ + return (cputime_t) m * 1000; +} + +/* + * Convert cputime to milliseconds and back. + */ +static inline unsigned int +cputime_to_secs(const cputime_t cputime) +{ + return __div(cputime, 1000000); +} + +static inline cputime_t +secs_to_cputime(const unsigned int s) +{ + return (cputime_t) s * 1000000; +} + +/* + * Convert cputime to timespec and back. + */ +static inline cputime_t +timespec_to_cputime(const struct timespec *value) +{ + return value->tv_nsec / 1000 + (u64) value->tv_sec * 1000000; +} + +static inline void +cputime_to_timespec(const cputime_t cputime, struct timespec *value) +{ +#ifndef __s390x__ + register_pair rp; + + rp.pair = cputime >> 1; + asm ("dr %0,%1" : "+d" (rp) : "d" (1000000 >> 1)); + value->tv_nsec = rp.subreg.even * 1000; + value->tv_sec = rp.subreg.odd; +#else + value->tv_nsec = (cputime % 1000000) * 1000; + value->tv_sec = cputime / 1000000; +#endif +} + +/* + * Convert cputime to timeval and back. + * Since cputime and timeval have the same resolution (microseconds) + * this is easy. + */ +static inline cputime_t +timeval_to_cputime(const struct timeval *value) +{ + return value->tv_usec + (u64) value->tv_sec * 1000000; +} + +static inline void +cputime_to_timeval(const cputime_t cputime, struct timeval *value) +{ +#ifndef __s390x__ + register_pair rp; + + rp.pair = cputime >> 1; + asm ("dr %0,%1" : "+d" (rp) : "d" (1000000 >> 1)); + value->tv_usec = rp.subreg.even; + value->tv_sec = rp.subreg.odd; +#else + value->tv_usec = cputime % 1000000; + value->tv_sec = cputime / 1000000; +#endif +} + +/* + * Convert cputime to clock and back. + */ +static inline clock_t +cputime_to_clock_t(cputime_t cputime) +{ + return __div(cputime, 1000000 / USER_HZ); +} + +static inline cputime_t +clock_t_to_cputime(unsigned long x) +{ + return (cputime_t) x * (1000000 / USER_HZ); +} + +/* + * Convert cputime64 to clock. + */ +static inline clock_t +cputime64_to_clock_t(cputime64_t cputime) +{ + return __div(cputime, 1000000 / USER_HZ); +} + +#endif /* _S390_CPUTIME_H */ diff --git a/arch/s390/include/asm/current.h b/arch/s390/include/asm/current.h new file mode 100644 index 000000000000..83cf36cde2da --- /dev/null +++ b/arch/s390/include/asm/current.h @@ -0,0 +1,23 @@ +/* + * include/asm-s390/current.h + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) + * + * Derived from "include/asm-i386/current.h" + */ + +#ifndef _S390_CURRENT_H +#define _S390_CURRENT_H + +#ifdef __KERNEL__ +#include + +struct task_struct; + +#define current ((struct task_struct *const)S390_lowcore.current_task) + +#endif + +#endif /* !(_S390_CURRENT_H) */ diff --git a/arch/s390/include/asm/dasd.h b/arch/s390/include/asm/dasd.h new file mode 100644 index 000000000000..3f002e13d024 --- /dev/null +++ b/arch/s390/include/asm/dasd.h @@ -0,0 +1,270 @@ +/* + * File...........: linux/drivers/s390/block/dasd.c + * Author(s)......: Holger Smolinski + * Bugreports.to..: + * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000 + * + * This file is the interface of the DASD device driver, which is exported to user space + * any future changes wrt the API will result in a change of the APIVERSION reported + * to userspace by the DASDAPIVER-ioctl + * + */ + +#ifndef DASD_H +#define DASD_H +#include + +#define DASD_IOCTL_LETTER 'D' + +#define DASD_API_VERSION 6 + +/* + * struct dasd_information2_t + * represents any data about the device, which is visible to userspace. + * including foramt and featueres. + */ +typedef struct dasd_information2_t { + unsigned int devno; /* S/390 devno */ + unsigned int real_devno; /* for aliases */ + unsigned int schid; /* S/390 subchannel identifier */ + unsigned int cu_type : 16; /* from SenseID */ + unsigned int cu_model : 8; /* from SenseID */ + unsigned int dev_type : 16; /* from SenseID */ + unsigned int dev_model : 8; /* from SenseID */ + unsigned int open_count; + unsigned int req_queue_len; + unsigned int chanq_len; /* length of chanq */ + char type[4]; /* from discipline.name, 'none' for unknown */ + unsigned int status; /* current device level */ + unsigned int label_block; /* where to find the VOLSER */ + unsigned int FBA_layout; /* fixed block size (like AIXVOL) */ + unsigned int characteristics_size; + unsigned int confdata_size; + char characteristics[64]; /* from read_device_characteristics */ + char configuration_data[256]; /* from read_configuration_data */ + unsigned int format; /* format info like formatted/cdl/ldl/... */ + unsigned int features; /* dasd features like 'ro',... */ + unsigned int reserved0; /* reserved for further use ,... */ + unsigned int reserved1; /* reserved for further use ,... */ + unsigned int reserved2; /* reserved for further use ,... */ + unsigned int reserved3; /* reserved for further use ,... */ + unsigned int reserved4; /* reserved for further use ,... */ + unsigned int reserved5; /* reserved for further use ,... */ + unsigned int reserved6; /* reserved for further use ,... */ + unsigned int reserved7; /* reserved for further use ,... */ +} dasd_information2_t; + +/* + * values to be used for dasd_information_t.format + * 0x00: NOT formatted + * 0x01: Linux disc layout + * 0x02: Common disc layout + */ +#define DASD_FORMAT_NONE 0 +#define DASD_FORMAT_LDL 1 +#define DASD_FORMAT_CDL 2 +/* + * values to be used for dasd_information_t.features + * 0x00: default features + * 0x01: readonly (ro) + * 0x02: use diag discipline (diag) + * 0x04: set the device initially online (internal use only) + * 0x08: enable ERP related logging + */ +#define DASD_FEATURE_DEFAULT 0x00 +#define DASD_FEATURE_READONLY 0x01 +#define DASD_FEATURE_USEDIAG 0x02 +#define DASD_FEATURE_INITIAL_ONLINE 0x04 +#define DASD_FEATURE_ERPLOG 0x08 + +#define DASD_PARTN_BITS 2 + +/* + * struct dasd_information_t + * represents any data about the data, which is visible to userspace + */ +typedef struct dasd_information_t { + unsigned int devno; /* S/390 devno */ + unsigned int real_devno; /* for aliases */ + unsigned int schid; /* S/390 subchannel identifier */ + unsigned int cu_type : 16; /* from SenseID */ + unsigned int cu_model : 8; /* from SenseID */ + unsigned int dev_type : 16; /* from SenseID */ + unsigned int dev_model : 8; /* from SenseID */ + unsigned int open_count; + unsigned int req_queue_len; + unsigned int chanq_len; /* length of chanq */ + char type[4]; /* from discipline.name, 'none' for unknown */ + unsigned int status; /* current device level */ + unsigned int label_block; /* where to find the VOLSER */ + unsigned int FBA_layout; /* fixed block size (like AIXVOL) */ + unsigned int characteristics_size; + unsigned int confdata_size; + char characteristics[64]; /* from read_device_characteristics */ + char configuration_data[256]; /* from read_configuration_data */ +} dasd_information_t; + +/* + * Read Subsystem Data - Performance Statistics + */ +typedef struct dasd_rssd_perf_stats_t { + unsigned char invalid:1; + unsigned char format:3; + unsigned char data_format:4; + unsigned char unit_address; + unsigned short device_status; + unsigned int nr_read_normal; + unsigned int nr_read_normal_hits; + unsigned int nr_write_normal; + unsigned int nr_write_fast_normal_hits; + unsigned int nr_read_seq; + unsigned int nr_read_seq_hits; + unsigned int nr_write_seq; + unsigned int nr_write_fast_seq_hits; + unsigned int nr_read_cache; + unsigned int nr_read_cache_hits; + unsigned int nr_write_cache; + unsigned int nr_write_fast_cache_hits; + unsigned int nr_inhibit_cache; + unsigned int nr_bybass_cache; + unsigned int nr_seq_dasd_to_cache; + unsigned int nr_dasd_to_cache; + unsigned int nr_cache_to_dasd; + unsigned int nr_delayed_fast_write; + unsigned int nr_normal_fast_write; + unsigned int nr_seq_fast_write; + unsigned int nr_cache_miss; + unsigned char status2; + unsigned int nr_quick_write_promotes; + unsigned char reserved; + unsigned short ssid; + unsigned char reseved2[96]; +} __attribute__((packed)) dasd_rssd_perf_stats_t; + +/* + * struct profile_info_t + * holds the profinling information + */ +typedef struct dasd_profile_info_t { + unsigned int dasd_io_reqs; /* number of requests processed at all */ + unsigned int dasd_io_sects; /* number of sectors processed at all */ + unsigned int dasd_io_secs[32]; /* histogram of request's sizes */ + unsigned int dasd_io_times[32]; /* histogram of requests's times */ + unsigned int dasd_io_timps[32]; /* histogram of requests's times per sector */ + unsigned int dasd_io_time1[32]; /* histogram of time from build to start */ + unsigned int dasd_io_time2[32]; /* histogram of time from start to irq */ + unsigned int dasd_io_time2ps[32]; /* histogram of time from start to irq */ + unsigned int dasd_io_time3[32]; /* histogram of time from irq to end */ + unsigned int dasd_io_nr_req[32]; /* histogram of # of requests in chanq */ +} dasd_profile_info_t; + +/* + * struct format_data_t + * represents all data necessary to format a dasd + */ +typedef struct format_data_t { + int start_unit; /* from track */ + int stop_unit; /* to track */ + int blksize; /* sectorsize */ + int intensity; +} format_data_t; + +/* + * values to be used for format_data_t.intensity + * 0/8: normal format + * 1/9: also write record zero + * 3/11: also write home address + * 4/12: invalidate track + */ +#define DASD_FMT_INT_FMT_R0 1 /* write record zero */ +#define DASD_FMT_INT_FMT_HA 2 /* write home address, also set FMT_R0 ! */ +#define DASD_FMT_INT_INVAL 4 /* invalidate tracks */ +#define DASD_FMT_INT_COMPAT 8 /* use OS/390 compatible disk layout */ + + +/* + * struct attrib_data_t + * represents the operation (cache) bits for the device. + * Used in DE to influence caching of the DASD. + */ +typedef struct attrib_data_t { + unsigned char operation:3; /* cache operation mode */ + unsigned char reserved:5; /* cache operation mode */ + __u16 nr_cyl; /* no of cyliners for read ahaed */ + __u8 reserved2[29]; /* for future use */ +} __attribute__ ((packed)) attrib_data_t; + +/* definition of operation (cache) bits within attributes of DE */ +#define DASD_NORMAL_CACHE 0x0 +#define DASD_BYPASS_CACHE 0x1 +#define DASD_INHIBIT_LOAD 0x2 +#define DASD_SEQ_ACCESS 0x3 +#define DASD_SEQ_PRESTAGE 0x4 +#define DASD_REC_ACCESS 0x5 + + +/******************************************************************************** + * SECTION: Definition of IOCTLs + * + * Here ist how the ioctl-nr should be used: + * 0 - 31 DASD driver itself + * 32 - 239 still open + * 240 - 255 reserved for EMC + *******************************************************************************/ + +/* Disable the volume (for Linux) */ +#define BIODASDDISABLE _IO(DASD_IOCTL_LETTER,0) +/* Enable the volume (for Linux) */ +#define BIODASDENABLE _IO(DASD_IOCTL_LETTER,1) +/* Issue a reserve/release command, rsp. */ +#define BIODASDRSRV _IO(DASD_IOCTL_LETTER,2) /* reserve */ +#define BIODASDRLSE _IO(DASD_IOCTL_LETTER,3) /* release */ +#define BIODASDSLCK _IO(DASD_IOCTL_LETTER,4) /* steal lock */ +/* reset profiling information of a device */ +#define BIODASDPRRST _IO(DASD_IOCTL_LETTER,5) +/* Quiesce IO on device */ +#define BIODASDQUIESCE _IO(DASD_IOCTL_LETTER,6) +/* Resume IO on device */ +#define BIODASDRESUME _IO(DASD_IOCTL_LETTER,7) + + +/* retrieve API version number */ +#define DASDAPIVER _IOR(DASD_IOCTL_LETTER,0,int) +/* Get information on a dasd device */ +#define BIODASDINFO _IOR(DASD_IOCTL_LETTER,1,dasd_information_t) +/* retrieve profiling information of a device */ +#define BIODASDPRRD _IOR(DASD_IOCTL_LETTER,2,dasd_profile_info_t) +/* Get information on a dasd device (enhanced) */ +#define BIODASDINFO2 _IOR(DASD_IOCTL_LETTER,3,dasd_information2_t) +/* Performance Statistics Read */ +#define BIODASDPSRD _IOR(DASD_IOCTL_LETTER,4,dasd_rssd_perf_stats_t) +/* Get Attributes (cache operations) */ +#define BIODASDGATTR _IOR(DASD_IOCTL_LETTER,5,attrib_data_t) + + +/* #define BIODASDFORMAT _IOW(IOCTL_LETTER,0,format_data_t) , deprecated */ +#define BIODASDFMT _IOW(DASD_IOCTL_LETTER,1,format_data_t) +/* Set Attributes (cache operations) */ +#define BIODASDSATTR _IOW(DASD_IOCTL_LETTER,2,attrib_data_t) + + +#endif /* DASD_H */ + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-indent-level: 4 + * c-brace-imaginary-offset: 0 + * c-brace-offset: -4 + * c-argdecl-indent: 4 + * c-label-offset: -4 + * c-continued-statement-offset: 4 + * c-continued-brace-offset: 0 + * indent-tabs-mode: nil + * tab-width: 8 + * End: + */ diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h new file mode 100644 index 000000000000..9450ce6e32de --- /dev/null +++ b/arch/s390/include/asm/debug.h @@ -0,0 +1,261 @@ +/* + * include/asm-s390/debug.h + * S/390 debug facility + * + * Copyright (C) 1999, 2000 IBM Deutschland Entwicklung GmbH, + * IBM Corporation + */ + +#ifndef DEBUG_H +#define DEBUG_H + +#include + +/* Note: + * struct __debug_entry must be defined outside of #ifdef __KERNEL__ + * in order to allow a user program to analyze the 'raw'-view. + */ + +struct __debug_entry{ + union { + struct { + unsigned long long clock:52; + unsigned long long exception:1; + unsigned long long level:3; + unsigned long long cpuid:8; + } fields; + + unsigned long long stck; + } id; + void* caller; +} __attribute__((packed)); + + +#define __DEBUG_FEATURE_VERSION 2 /* version of debug feature */ + +#ifdef __KERNEL__ +#include +#include +#include +#include + +#define DEBUG_MAX_LEVEL 6 /* debug levels range from 0 to 6 */ +#define DEBUG_OFF_LEVEL -1 /* level where debug is switched off */ +#define DEBUG_FLUSH_ALL -1 /* parameter to flush all areas */ +#define DEBUG_MAX_VIEWS 10 /* max number of views in proc fs */ +#define DEBUG_MAX_NAME_LEN 64 /* max length for a debugfs file name */ +#define DEBUG_DEFAULT_LEVEL 3 /* initial debug level */ + +#define DEBUG_DIR_ROOT "s390dbf" /* name of debug root directory in proc fs */ + +#define DEBUG_DATA(entry) (char*)(entry + 1) /* data is stored behind */ + /* the entry information */ + +typedef struct __debug_entry debug_entry_t; + +struct debug_view; + +typedef struct debug_info { + struct debug_info* next; + struct debug_info* prev; + atomic_t ref_count; + spinlock_t lock; + int level; + int nr_areas; + int pages_per_area; + int buf_size; + int entry_size; + debug_entry_t*** areas; + int active_area; + int *active_pages; + int *active_entries; + struct dentry* debugfs_root_entry; + struct dentry* debugfs_entries[DEBUG_MAX_VIEWS]; + struct debug_view* views[DEBUG_MAX_VIEWS]; + char name[DEBUG_MAX_NAME_LEN]; + mode_t mode; +} debug_info_t; + +typedef int (debug_header_proc_t) (debug_info_t* id, + struct debug_view* view, + int area, + debug_entry_t* entry, + char* out_buf); + +typedef int (debug_format_proc_t) (debug_info_t* id, + struct debug_view* view, char* out_buf, + const char* in_buf); +typedef int (debug_prolog_proc_t) (debug_info_t* id, + struct debug_view* view, + char* out_buf); +typedef int (debug_input_proc_t) (debug_info_t* id, + struct debug_view* view, + struct file* file, + const char __user *user_buf, + size_t in_buf_size, loff_t* offset); + +int debug_dflt_header_fn(debug_info_t* id, struct debug_view* view, + int area, debug_entry_t* entry, char* out_buf); + +struct debug_view { + char name[DEBUG_MAX_NAME_LEN]; + debug_prolog_proc_t* prolog_proc; + debug_header_proc_t* header_proc; + debug_format_proc_t* format_proc; + debug_input_proc_t* input_proc; + void* private_data; +}; + +extern struct debug_view debug_hex_ascii_view; +extern struct debug_view debug_raw_view; +extern struct debug_view debug_sprintf_view; + +/* do NOT use the _common functions */ + +debug_entry_t* debug_event_common(debug_info_t* id, int level, + const void* data, int length); + +debug_entry_t* debug_exception_common(debug_info_t* id, int level, + const void* data, int length); + +/* Debug Feature API: */ + +debug_info_t *debug_register(const char *name, int pages, int nr_areas, + int buf_size); + +debug_info_t *debug_register_mode(const char *name, int pages, int nr_areas, + int buf_size, mode_t mode, uid_t uid, + gid_t gid); + +void debug_unregister(debug_info_t* id); + +void debug_set_level(debug_info_t* id, int new_level); + +void debug_stop_all(void); + +static inline debug_entry_t* +debug_event(debug_info_t* id, int level, void* data, int length) +{ + if ((!id) || (level > id->level) || (id->pages_per_area == 0)) + return NULL; + return debug_event_common(id,level,data,length); +} + +static inline debug_entry_t* +debug_int_event(debug_info_t* id, int level, unsigned int tag) +{ + unsigned int t=tag; + if ((!id) || (level > id->level) || (id->pages_per_area == 0)) + return NULL; + return debug_event_common(id,level,&t,sizeof(unsigned int)); +} + +static inline debug_entry_t * +debug_long_event (debug_info_t* id, int level, unsigned long tag) +{ + unsigned long t=tag; + if ((!id) || (level > id->level) || (id->pages_per_area == 0)) + return NULL; + return debug_event_common(id,level,&t,sizeof(unsigned long)); +} + +static inline debug_entry_t* +debug_text_event(debug_info_t* id, int level, const char* txt) +{ + if ((!id) || (level > id->level) || (id->pages_per_area == 0)) + return NULL; + return debug_event_common(id,level,txt,strlen(txt)); +} + +extern debug_entry_t * +debug_sprintf_event(debug_info_t* id,int level,char *string,...) + __attribute__ ((format(printf, 3, 4))); + + +static inline debug_entry_t* +debug_exception(debug_info_t* id, int level, void* data, int length) +{ + if ((!id) || (level > id->level) || (id->pages_per_area == 0)) + return NULL; + return debug_exception_common(id,level,data,length); +} + +static inline debug_entry_t* +debug_int_exception(debug_info_t* id, int level, unsigned int tag) +{ + unsigned int t=tag; + if ((!id) || (level > id->level) || (id->pages_per_area == 0)) + return NULL; + return debug_exception_common(id,level,&t,sizeof(unsigned int)); +} + +static inline debug_entry_t * +debug_long_exception (debug_info_t* id, int level, unsigned long tag) +{ + unsigned long t=tag; + if ((!id) || (level > id->level) || (id->pages_per_area == 0)) + return NULL; + return debug_exception_common(id,level,&t,sizeof(unsigned long)); +} + +static inline debug_entry_t* +debug_text_exception(debug_info_t* id, int level, const char* txt) +{ + if ((!id) || (level > id->level) || (id->pages_per_area == 0)) + return NULL; + return debug_exception_common(id,level,txt,strlen(txt)); +} + + +extern debug_entry_t * +debug_sprintf_exception(debug_info_t* id,int level,char *string,...) + __attribute__ ((format(printf, 3, 4))); + +int debug_register_view(debug_info_t* id, struct debug_view* view); +int debug_unregister_view(debug_info_t* id, struct debug_view* view); + +/* + define the debug levels: + - 0 No debugging output to console or syslog + - 1 Log internal errors to syslog, ignore check conditions + - 2 Log internal errors and check conditions to syslog + - 3 Log internal errors to console, log check conditions to syslog + - 4 Log internal errors and check conditions to console + - 5 panic on internal errors, log check conditions to console + - 6 panic on both, internal errors and check conditions + */ + +#ifndef DEBUG_LEVEL +#define DEBUG_LEVEL 4 +#endif + +#define INTERNAL_ERRMSG(x,y...) "E" __FILE__ "%d: " x, __LINE__, y +#define INTERNAL_WRNMSG(x,y...) "W" __FILE__ "%d: " x, __LINE__, y +#define INTERNAL_INFMSG(x,y...) "I" __FILE__ "%d: " x, __LINE__, y +#define INTERNAL_DEBMSG(x,y...) "D" __FILE__ "%d: " x, __LINE__, y + +#if DEBUG_LEVEL > 0 +#define PRINT_DEBUG(x...) printk ( KERN_DEBUG PRINTK_HEADER x ) +#define PRINT_INFO(x...) printk ( KERN_INFO PRINTK_HEADER x ) +#define PRINT_WARN(x...) printk ( KERN_WARNING PRINTK_HEADER x ) +#define PRINT_ERR(x...) printk ( KERN_ERR PRINTK_HEADER x ) +#define PRINT_FATAL(x...) panic ( PRINTK_HEADER x ) +#else +#define PRINT_DEBUG(x...) printk ( KERN_DEBUG PRINTK_HEADER x ) +#define PRINT_INFO(x...) printk ( KERN_DEBUG PRINTK_HEADER x ) +#define PRINT_WARN(x...) printk ( KERN_DEBUG PRINTK_HEADER x ) +#define PRINT_ERR(x...) printk ( KERN_DEBUG PRINTK_HEADER x ) +#define PRINT_FATAL(x...) printk ( KERN_DEBUG PRINTK_HEADER x ) +#endif /* DASD_DEBUG */ + +#undef DEBUG_MALLOC +#ifdef DEBUG_MALLOC +void *b; +#define kmalloc(x...) (PRINT_INFO(" kmalloc %p\n",b=kmalloc(x)),b) +#define kfree(x) PRINT_INFO(" kfree %p\n",x);kfree(x) +#define get_zeroed_page(x...) (PRINT_INFO(" gfp %p\n",b=get_zeroed_page(x)),b) +#define __get_free_pages(x...) (PRINT_INFO(" gfps %p\n",b=__get_free_pages(x)),b) +#endif /* DEBUG_MALLOC */ + +#endif /* __KERNEL__ */ +#endif /* DEBUG_H */ diff --git a/arch/s390/include/asm/delay.h b/arch/s390/include/asm/delay.h new file mode 100644 index 000000000000..78357314c450 --- /dev/null +++ b/arch/s390/include/asm/delay.h @@ -0,0 +1,22 @@ +/* + * include/asm-s390/delay.h + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) + * + * Derived from "include/asm-i386/delay.h" + * Copyright (C) 1993 Linus Torvalds + * + * Delay routines calling functions in arch/s390/lib/delay.c + */ + +#ifndef _S390_DELAY_H +#define _S390_DELAY_H + +extern void __udelay(unsigned long usecs); +extern void __delay(unsigned long loops); + +#define udelay(n) __udelay(n) + +#endif /* defined(_S390_DELAY_H) */ diff --git a/arch/s390/include/asm/device.h b/arch/s390/include/asm/device.h new file mode 100644 index 000000000000..d8f9872b0e2d --- /dev/null +++ b/arch/s390/include/asm/device.h @@ -0,0 +1,7 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include + diff --git a/arch/s390/include/asm/diag.h b/arch/s390/include/asm/diag.h new file mode 100644 index 000000000000..72b2e2f2d32d --- /dev/null +++ b/arch/s390/include/asm/diag.h @@ -0,0 +1,39 @@ +/* + * s390 diagnose functions + * + * Copyright IBM Corp. 2007 + * Author(s): Michael Holzheu + */ + +#ifndef _ASM_S390_DIAG_H +#define _ASM_S390_DIAG_H + +/* + * Diagnose 10: Release pages + */ +extern void diag10(unsigned long addr); + +/* + * Diagnose 14: Input spool file manipulation + */ +extern int diag14(unsigned long rx, unsigned long ry1, unsigned long subcode); + +/* + * Diagnose 210: Get information about a virtual device + */ +struct diag210 { + u16 vrdcdvno; /* device number (input) */ + u16 vrdclen; /* data block length (input) */ + u8 vrdcvcla; /* virtual device class (output) */ + u8 vrdcvtyp; /* virtual device type (output) */ + u8 vrdcvsta; /* virtual device status (output) */ + u8 vrdcvfla; /* virtual device flags (output) */ + u8 vrdcrccl; /* real device class (output) */ + u8 vrdccrty; /* real device type (output) */ + u8 vrdccrmd; /* real device model (output) */ + u8 vrdccrft; /* real device feature (output) */ +} __attribute__((packed, aligned(4))); + +extern int diag210(struct diag210 *addr); + +#endif /* _ASM_S390_DIAG_H */ diff --git a/arch/s390/include/asm/div64.h b/arch/s390/include/asm/div64.h new file mode 100644 index 000000000000..6cd978cefb28 --- /dev/null +++ b/arch/s390/include/asm/div64.h @@ -0,0 +1 @@ +#include diff --git a/arch/s390/include/asm/dma.h b/arch/s390/include/asm/dma.h new file mode 100644 index 000000000000..7425c6af6cd4 --- /dev/null +++ b/arch/s390/include/asm/dma.h @@ -0,0 +1,16 @@ +/* + * include/asm-s390/dma.h + * + * S390 version + */ + +#ifndef _ASM_DMA_H +#define _ASM_DMA_H + +#include /* need byte IO */ + +#define MAX_DMA_ADDRESS 0x80000000 + +#define free_dma(x) do { } while (0) + +#endif /* _ASM_DMA_H */ diff --git a/arch/s390/include/asm/ebcdic.h b/arch/s390/include/asm/ebcdic.h new file mode 100644 index 000000000000..7f6f641d32f4 --- /dev/null +++ b/arch/s390/include/asm/ebcdic.h @@ -0,0 +1,49 @@ +/* + * include/asm-s390/ebcdic.h + * EBCDIC -> ASCII, ASCII -> EBCDIC conversion routines. + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky + */ + +#ifndef _EBCDIC_H +#define _EBCDIC_H + +#ifndef _S390_TYPES_H +#include +#endif + +extern __u8 _ascebc_500[256]; /* ASCII -> EBCDIC 500 conversion table */ +extern __u8 _ebcasc_500[256]; /* EBCDIC 500 -> ASCII conversion table */ +extern __u8 _ascebc[256]; /* ASCII -> EBCDIC conversion table */ +extern __u8 _ebcasc[256]; /* EBCDIC -> ASCII conversion table */ +extern __u8 _ebc_tolower[256]; /* EBCDIC -> lowercase */ +extern __u8 _ebc_toupper[256]; /* EBCDIC -> uppercase */ + +static inline void +codepage_convert(const __u8 *codepage, volatile __u8 * addr, unsigned long nr) +{ + if (nr-- <= 0) + return; + asm volatile( + " bras 1,1f\n" + " tr 0(1,%0),0(%2)\n" + "0: tr 0(256,%0),0(%2)\n" + " la %0,256(%0)\n" + "1: ahi %1,-256\n" + " jnm 0b\n" + " ex %1,0(1)" + : "+&a" (addr), "+&a" (nr) + : "a" (codepage) : "cc", "memory", "1"); +} + +#define ASCEBC(addr,nr) codepage_convert(_ascebc, addr, nr) +#define EBCASC(addr,nr) codepage_convert(_ebcasc, addr, nr) +#define ASCEBC_500(addr,nr) codepage_convert(_ascebc_500, addr, nr) +#define EBCASC_500(addr,nr) codepage_convert(_ebcasc_500, addr, nr) +#define EBC_TOLOWER(addr,nr) codepage_convert(_ebc_tolower, addr, nr) +#define EBC_TOUPPER(addr,nr) codepage_convert(_ebc_toupper, addr, nr) + +#endif + diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h new file mode 100644 index 000000000000..3cad56923815 --- /dev/null +++ b/arch/s390/include/asm/elf.h @@ -0,0 +1,196 @@ +/* + * include/asm-s390/elf.h + * + * S390 version + * + * Derived from "include/asm-i386/elf.h" + */ + +#ifndef __ASMS390_ELF_H +#define __ASMS390_ELF_H + +/* s390 relocations defined by the ABIs */ +#define R_390_NONE 0 /* No reloc. */ +#define R_390_8 1 /* Direct 8 bit. */ +#define R_390_12 2 /* Direct 12 bit. */ +#define R_390_16 3 /* Direct 16 bit. */ +#define R_390_32 4 /* Direct 32 bit. */ +#define R_390_PC32 5 /* PC relative 32 bit. */ +#define R_390_GOT12 6 /* 12 bit GOT offset. */ +#define R_390_GOT32 7 /* 32 bit GOT offset. */ +#define R_390_PLT32 8 /* 32 bit PC relative PLT address. */ +#define R_390_COPY 9 /* Copy symbol at runtime. */ +#define R_390_GLOB_DAT 10 /* Create GOT entry. */ +#define R_390_JMP_SLOT 11 /* Create PLT entry. */ +#define R_390_RELATIVE 12 /* Adjust by program base. */ +#define R_390_GOTOFF32 13 /* 32 bit offset to GOT. */ +#define R_390_GOTPC 14 /* 32 bit PC rel. offset to GOT. */ +#define R_390_GOT16 15 /* 16 bit GOT offset. */ +#define R_390_PC16 16 /* PC relative 16 bit. */ +#define R_390_PC16DBL 17 /* PC relative 16 bit shifted by 1. */ +#define R_390_PLT16DBL 18 /* 16 bit PC rel. PLT shifted by 1. */ +#define R_390_PC32DBL 19 /* PC relative 32 bit shifted by 1. */ +#define R_390_PLT32DBL 20 /* 32 bit PC rel. PLT shifted by 1. */ +#define R_390_GOTPCDBL 21 /* 32 bit PC rel. GOT shifted by 1. */ +#define R_390_64 22 /* Direct 64 bit. */ +#define R_390_PC64 23 /* PC relative 64 bit. */ +#define R_390_GOT64 24 /* 64 bit GOT offset. */ +#define R_390_PLT64 25 /* 64 bit PC relative PLT address. */ +#define R_390_GOTENT 26 /* 32 bit PC rel. to GOT entry >> 1. */ +#define R_390_GOTOFF16 27 /* 16 bit offset to GOT. */ +#define R_390_GOTOFF64 28 /* 64 bit offset to GOT. */ +#define R_390_GOTPLT12 29 /* 12 bit offset to jump slot. */ +#define R_390_GOTPLT16 30 /* 16 bit offset to jump slot. */ +#define R_390_GOTPLT32 31 /* 32 bit offset to jump slot. */ +#define R_390_GOTPLT64 32 /* 64 bit offset to jump slot. */ +#define R_390_GOTPLTENT 33 /* 32 bit rel. offset to jump slot. */ +#define R_390_PLTOFF16 34 /* 16 bit offset from GOT to PLT. */ +#define R_390_PLTOFF32 35 /* 32 bit offset from GOT to PLT. */ +#define R_390_PLTOFF64 36 /* 16 bit offset from GOT to PLT. */ +#define R_390_TLS_LOAD 37 /* Tag for load insn in TLS code. */ +#define R_390_TLS_GDCALL 38 /* Tag for function call in general + dynamic TLS code. */ +#define R_390_TLS_LDCALL 39 /* Tag for function call in local + dynamic TLS code. */ +#define R_390_TLS_GD32 40 /* Direct 32 bit for general dynamic + thread local data. */ +#define R_390_TLS_GD64 41 /* Direct 64 bit for general dynamic + thread local data. */ +#define R_390_TLS_GOTIE12 42 /* 12 bit GOT offset for static TLS + block offset. */ +#define R_390_TLS_GOTIE32 43 /* 32 bit GOT offset for static TLS + block offset. */ +#define R_390_TLS_GOTIE64 44 /* 64 bit GOT offset for static TLS + block offset. */ +#define R_390_TLS_LDM32 45 /* Direct 32 bit for local dynamic + thread local data in LD code. */ +#define R_390_TLS_LDM64 46 /* Direct 64 bit for local dynamic + thread local data in LD code. */ +#define R_390_TLS_IE32 47 /* 32 bit address of GOT entry for + negated static TLS block offset. */ +#define R_390_TLS_IE64 48 /* 64 bit address of GOT entry for + negated static TLS block offset. */ +#define R_390_TLS_IEENT 49 /* 32 bit rel. offset to GOT entry for + negated static TLS block offset. */ +#define R_390_TLS_LE32 50 /* 32 bit negated offset relative to + static TLS block. */ +#define R_390_TLS_LE64 51 /* 64 bit negated offset relative to + static TLS block. */ +#define R_390_TLS_LDO32 52 /* 32 bit offset relative to TLS + block. */ +#define R_390_TLS_LDO64 53 /* 64 bit offset relative to TLS + block. */ +#define R_390_TLS_DTPMOD 54 /* ID of module containing symbol. */ +#define R_390_TLS_DTPOFF 55 /* Offset in TLS block. */ +#define R_390_TLS_TPOFF 56 /* Negate offset in static TLS + block. */ +#define R_390_20 57 /* Direct 20 bit. */ +#define R_390_GOT20 58 /* 20 bit GOT offset. */ +#define R_390_GOTPLT20 59 /* 20 bit offset to jump slot. */ +#define R_390_TLS_GOTIE20 60 /* 20 bit GOT offset for static TLS + block offset. */ +/* Keep this the last entry. */ +#define R_390_NUM 61 + +/* + * These are used to set parameters in the core dumps. + */ +#ifndef __s390x__ +#define ELF_CLASS ELFCLASS32 +#else /* __s390x__ */ +#define ELF_CLASS ELFCLASS64 +#endif /* __s390x__ */ +#define ELF_DATA ELFDATA2MSB +#define ELF_ARCH EM_S390 + +/* + * ELF register definitions.. + */ + +#include +#include + +typedef s390_fp_regs elf_fpregset_t; +typedef s390_regs elf_gregset_t; + +typedef s390_fp_regs compat_elf_fpregset_t; +typedef s390_compat_regs compat_elf_gregset_t; + +#include /* for task_struct */ +#include /* for save_access_regs */ +#include + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) \ + (((x)->e_machine == EM_S390 || (x)->e_machine == EM_S390_OLD) \ + && (x)->e_ident[EI_CLASS] == ELF_CLASS) +#define compat_elf_check_arch(x) \ + (((x)->e_machine == EM_S390 || (x)->e_machine == EM_S390_OLD) \ + && (x)->e_ident[EI_CLASS] == ELF_CLASS) +#define compat_start_thread start_thread31 + +/* For SVR4/S390 the function pointer to be registered with `atexit` is + passed in R14. */ +#define ELF_PLAT_INIT(_r, load_addr) \ + do { \ + _r->gprs[14] = 0; \ + } while (0) + +#define CORE_DUMP_USE_REGSET +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE 4096 + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ +#define ELF_ET_DYN_BASE (STACK_TOP / 3 * 2) + +/* This yields a mask that user programs can use to figure out what + instruction set this CPU supports. */ + +extern unsigned long elf_hwcap; +#define ELF_HWCAP (elf_hwcap) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. + + For the moment, we have only optimizations for the Intel generations, + but that could change... */ + +#define ELF_PLATFORM_SIZE 8 +extern char elf_platform[]; +#define ELF_PLATFORM (elf_platform) + +#ifndef __s390x__ +#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) +#else /* __s390x__ */ +#define SET_PERSONALITY(ex, ibcs2) \ +do { \ + if (ibcs2) \ + set_personality(PER_SVR4); \ + else if (current->personality != PER_LINUX32) \ + set_personality(PER_LINUX); \ + if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ + set_thread_flag(TIF_31BIT); \ + else \ + clear_thread_flag(TIF_31BIT); \ +} while (0) +#endif /* __s390x__ */ + +/* + * An executable for which elf_read_implies_exec() returns TRUE will + * have the READ_IMPLIES_EXEC personality flag set automatically. + */ +#define elf_read_implies_exec(ex, executable_stack) \ +({ \ + if (current->mm->context.noexec && \ + executable_stack != EXSTACK_DISABLE_X) \ + disable_noexec(current->mm, current); \ + current->mm->context.noexec == 0; \ +}) + +#endif diff --git a/arch/s390/include/asm/emergency-restart.h b/arch/s390/include/asm/emergency-restart.h new file mode 100644 index 000000000000..108d8c48e42e --- /dev/null +++ b/arch/s390/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/s390/include/asm/errno.h b/arch/s390/include/asm/errno.h new file mode 100644 index 000000000000..e41d5b37c4d6 --- /dev/null +++ b/arch/s390/include/asm/errno.h @@ -0,0 +1,13 @@ +/* + * include/asm-s390/errno.h + * + * S390 version + * + */ + +#ifndef _S390_ERRNO_H +#define _S390_ERRNO_H + +#include + +#endif diff --git a/arch/s390/include/asm/etr.h b/arch/s390/include/asm/etr.h new file mode 100644 index 000000000000..80ef58c61970 --- /dev/null +++ b/arch/s390/include/asm/etr.h @@ -0,0 +1,258 @@ +/* + * include/asm-s390/etr.h + * + * Copyright IBM Corp. 2006 + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) + */ +#ifndef __S390_ETR_H +#define __S390_ETR_H + +/* ETR attachment control register */ +struct etr_eacr { + unsigned int e0 : 1; /* port 0 stepping control */ + unsigned int e1 : 1; /* port 1 stepping control */ + unsigned int _pad0 : 5; /* must be 00100 */ + unsigned int dp : 1; /* data port control */ + unsigned int p0 : 1; /* port 0 change recognition control */ + unsigned int p1 : 1; /* port 1 change recognition control */ + unsigned int _pad1 : 3; /* must be 000 */ + unsigned int ea : 1; /* ETR alert control */ + unsigned int es : 1; /* ETR sync check control */ + unsigned int sl : 1; /* switch to local control */ +} __attribute__ ((packed)); + +/* Port state returned by steai */ +enum etr_psc { + etr_psc_operational = 0, + etr_psc_semi_operational = 1, + etr_psc_protocol_error = 4, + etr_psc_no_symbols = 8, + etr_psc_no_signal = 12, + etr_psc_pps_mode = 13 +}; + +/* Logical port state returned by stetr */ +enum etr_lpsc { + etr_lpsc_operational_step = 0, + etr_lpsc_operational_alt = 1, + etr_lpsc_semi_operational = 2, + etr_lpsc_protocol_error = 4, + etr_lpsc_no_symbol_sync = 8, + etr_lpsc_no_signal = 12, + etr_lpsc_pps_mode = 13 +}; + +/* ETR status words */ +struct etr_esw { + struct etr_eacr eacr; /* attachment control register */ + unsigned int y : 1; /* stepping mode */ + unsigned int _pad0 : 5; /* must be 00000 */ + unsigned int p : 1; /* stepping port number */ + unsigned int q : 1; /* data port number */ + unsigned int psc0 : 4; /* port 0 state code */ + unsigned int psc1 : 4; /* port 1 state code */ +} __attribute__ ((packed)); + +/* Second level data register status word */ +struct etr_slsw { + unsigned int vv1 : 1; /* copy of validity bit data frame 1 */ + unsigned int vv2 : 1; /* copy of validity bit data frame 2 */ + unsigned int vv3 : 1; /* copy of validity bit data frame 3 */ + unsigned int vv4 : 1; /* copy of validity bit data frame 4 */ + unsigned int _pad0 : 19; /* must by all zeroes */ + unsigned int n : 1; /* EAF port number */ + unsigned int v1 : 1; /* validity bit ETR data frame 1 */ + unsigned int v2 : 1; /* validity bit ETR data frame 2 */ + unsigned int v3 : 1; /* validity bit ETR data frame 3 */ + unsigned int v4 : 1; /* validity bit ETR data frame 4 */ + unsigned int _pad1 : 4; /* must be 0000 */ +} __attribute__ ((packed)); + +/* ETR data frames */ +struct etr_edf1 { + unsigned int u : 1; /* untuned bit */ + unsigned int _pad0 : 1; /* must be 0 */ + unsigned int r : 1; /* service request bit */ + unsigned int _pad1 : 4; /* must be 0000 */ + unsigned int a : 1; /* time adjustment bit */ + unsigned int net_id : 8; /* ETR network id */ + unsigned int etr_id : 8; /* id of ETR which sends data frames */ + unsigned int etr_pn : 8; /* port number of ETR output port */ +} __attribute__ ((packed)); + +struct etr_edf2 { + unsigned int etv : 32; /* Upper 32 bits of TOD. */ +} __attribute__ ((packed)); + +struct etr_edf3 { + unsigned int rc : 8; /* failure reason code */ + unsigned int _pad0 : 3; /* must be 000 */ + unsigned int c : 1; /* ETR coupled bit */ + unsigned int tc : 4; /* ETR type code */ + unsigned int blto : 8; /* biased local time offset */ + /* (blto - 128) * 15 = minutes */ + unsigned int buo : 8; /* biased utc offset */ + /* (buo - 128) = leap seconds */ +} __attribute__ ((packed)); + +struct etr_edf4 { + unsigned int ed : 8; /* ETS device dependent data */ + unsigned int _pad0 : 1; /* must be 0 */ + unsigned int buc : 5; /* biased ut1 correction */ + /* (buc - 16) * 0.1 seconds */ + unsigned int em : 6; /* ETS error magnitude */ + unsigned int dc : 6; /* ETS drift code */ + unsigned int sc : 6; /* ETS steering code */ +} __attribute__ ((packed)); + +/* + * ETR attachment information block, two formats + * format 1 has 4 reserved words with a size of 64 bytes + * format 2 has 16 reserved words with a size of 96 bytes + */ +struct etr_aib { + struct etr_esw esw; + struct etr_slsw slsw; + unsigned long long tsp; + struct etr_edf1 edf1; + struct etr_edf2 edf2; + struct etr_edf3 edf3; + struct etr_edf4 edf4; + unsigned int reserved[16]; +} __attribute__ ((packed,aligned(8))); + +/* ETR interruption parameter */ +struct etr_irq_parm { + unsigned int _pad0 : 8; + unsigned int pc0 : 1; /* port 0 state change */ + unsigned int pc1 : 1; /* port 1 state change */ + unsigned int _pad1 : 3; + unsigned int eai : 1; /* ETR alert indication */ + unsigned int _pad2 : 18; +} __attribute__ ((packed)); + +/* Query TOD offset result */ +struct etr_ptff_qto { + unsigned long long physical_clock; + unsigned long long tod_offset; + unsigned long long logical_tod_offset; + unsigned long long tod_epoch_difference; +} __attribute__ ((packed)); + +/* Inline assembly helper functions */ +static inline int etr_setr(struct etr_eacr *ctrl) +{ + int rc = -ENOSYS; + + asm volatile( + " .insn s,0xb2160000,0(%2)\n" + "0: la %0,0\n" + "1:\n" + EX_TABLE(0b,1b) + : "+d" (rc) : "m" (*ctrl), "a" (ctrl)); + return rc; +} + +/* Stores a format 1 aib with 64 bytes */ +static inline int etr_stetr(struct etr_aib *aib) +{ + int rc = -ENOSYS; + + asm volatile( + " .insn s,0xb2170000,0(%2)\n" + "0: la %0,0\n" + "1:\n" + EX_TABLE(0b,1b) + : "+d" (rc) : "m" (*aib), "a" (aib)); + return rc; +} + +/* Stores a format 2 aib with 96 bytes for specified port */ +static inline int etr_steai(struct etr_aib *aib, unsigned int func) +{ + register unsigned int reg0 asm("0") = func; + int rc = -ENOSYS; + + asm volatile( + " .insn s,0xb2b30000,0(%2)\n" + "0: la %0,0\n" + "1:\n" + EX_TABLE(0b,1b) + : "+d" (rc) : "m" (*aib), "a" (aib), "d" (reg0)); + return rc; +} + +/* Function codes for the steai instruction. */ +#define ETR_STEAI_STEPPING_PORT 0x10 +#define ETR_STEAI_ALTERNATE_PORT 0x11 +#define ETR_STEAI_PORT_0 0x12 +#define ETR_STEAI_PORT_1 0x13 + +static inline int etr_ptff(void *ptff_block, unsigned int func) +{ + register unsigned int reg0 asm("0") = func; + register unsigned long reg1 asm("1") = (unsigned long) ptff_block; + int rc = -ENOSYS; + + asm volatile( + " .word 0x0104\n" + " ipm %0\n" + " srl %0,28\n" + : "=d" (rc), "=m" (ptff_block) + : "d" (reg0), "d" (reg1), "m" (ptff_block) : "cc"); + return rc; +} + +/* Function codes for the ptff instruction. */ +#define ETR_PTFF_QAF 0x00 /* query available functions */ +#define ETR_PTFF_QTO 0x01 /* query tod offset */ +#define ETR_PTFF_QSI 0x02 /* query steering information */ +#define ETR_PTFF_ATO 0x40 /* adjust tod offset */ +#define ETR_PTFF_STO 0x41 /* set tod offset */ +#define ETR_PTFF_SFS 0x42 /* set fine steering rate */ +#define ETR_PTFF_SGS 0x43 /* set gross steering rate */ + +/* Functions needed by the machine check handler */ +void etr_switch_to_local(void); +void etr_sync_check(void); + +/* STP interruption parameter */ +struct stp_irq_parm { + unsigned int _pad0 : 14; + unsigned int tsc : 1; /* Timing status change */ + unsigned int lac : 1; /* Link availability change */ + unsigned int tcpc : 1; /* Time control parameter change */ + unsigned int _pad2 : 15; +} __attribute__ ((packed)); + +#define STP_OP_SYNC 1 +#define STP_OP_CTRL 3 + +struct stp_sstpi { + unsigned int rsvd0; + unsigned int rsvd1 : 8; + unsigned int stratum : 8; + unsigned int vbits : 16; + unsigned int leaps : 16; + unsigned int tmd : 4; + unsigned int ctn : 4; + unsigned int rsvd2 : 3; + unsigned int c : 1; + unsigned int tst : 4; + unsigned int tzo : 16; + unsigned int dsto : 16; + unsigned int ctrl : 16; + unsigned int rsvd3 : 16; + unsigned int tto; + unsigned int rsvd4; + unsigned int ctnid[3]; + unsigned int rsvd5; + unsigned int todoff[4]; + unsigned int rsvd6[48]; +} __attribute__ ((packed)); + +/* Functions needed by the machine check handler */ +void stp_sync_check(void); +void stp_island_check(void); + +#endif /* __S390_ETR_H */ diff --git a/arch/s390/include/asm/extmem.h b/arch/s390/include/asm/extmem.h new file mode 100644 index 000000000000..33837d756184 --- /dev/null +++ b/arch/s390/include/asm/extmem.h @@ -0,0 +1,33 @@ +/* + * include/asm-s390x/extmem.h + * + * definitions for external memory segment support + * Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation + */ + +#ifndef _ASM_S390X_DCSS_H +#define _ASM_S390X_DCSS_H +#ifndef __ASSEMBLY__ + +/* possible values for segment type as returned by segment_info */ +#define SEG_TYPE_SW 0 +#define SEG_TYPE_EW 1 +#define SEG_TYPE_SR 2 +#define SEG_TYPE_ER 3 +#define SEG_TYPE_SN 4 +#define SEG_TYPE_EN 5 +#define SEG_TYPE_SC 6 +#define SEG_TYPE_EWEN 7 + +#define SEGMENT_SHARED 0 +#define SEGMENT_EXCLUSIVE 1 + +int segment_load (char *name, int segtype, unsigned long *addr, unsigned long *length); +void segment_unload(char *name); +void segment_save(char *name); +int segment_type (char* name); +int segment_modify_shared (char *name, int do_nonshared); +void segment_warning(int rc, char *seg_name); + +#endif +#endif diff --git a/arch/s390/include/asm/fb.h b/arch/s390/include/asm/fb.h new file mode 100644 index 000000000000..c7df38030992 --- /dev/null +++ b/arch/s390/include/asm/fb.h @@ -0,0 +1,12 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ +#include + +#define fb_pgprotect(...) do {} while (0) + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/s390/include/asm/fcntl.h b/arch/s390/include/asm/fcntl.h new file mode 100644 index 000000000000..46ab12db5739 --- /dev/null +++ b/arch/s390/include/asm/fcntl.h @@ -0,0 +1 @@ +#include diff --git a/arch/s390/include/asm/fcx.h b/arch/s390/include/asm/fcx.h new file mode 100644 index 000000000000..8be1f3a58042 --- /dev/null +++ b/arch/s390/include/asm/fcx.h @@ -0,0 +1,311 @@ +/* + * Functions for assembling fcx enabled I/O control blocks. + * + * Copyright IBM Corp. 2008 + * Author(s): Peter Oberparleiter + */ + +#ifndef _ASM_S390_FCX_H +#define _ASM_S390_FCX_H _ASM_S390_FCX_H + +#include + +#define TCW_FORMAT_DEFAULT 0 +#define TCW_TIDAW_FORMAT_DEFAULT 0 +#define TCW_FLAGS_INPUT_TIDA 1 << (23 - 5) +#define TCW_FLAGS_TCCB_TIDA 1 << (23 - 6) +#define TCW_FLAGS_OUTPUT_TIDA 1 << (23 - 7) +#define TCW_FLAGS_TIDAW_FORMAT(x) ((x) & 3) << (23 - 9) +#define TCW_FLAGS_GET_TIDAW_FORMAT(x) (((x) >> (23 - 9)) & 3) + +/** + * struct tcw - Transport Control Word (TCW) + * @format: TCW format + * @flags: TCW flags + * @tccbl: Transport-Command-Control-Block Length + * @r: Read Operations + * @w: Write Operations + * @output: Output-Data Address + * @input: Input-Data Address + * @tsb: Transport-Status-Block Address + * @tccb: Transport-Command-Control-Block Address + * @output_count: Output Count + * @input_count: Input Count + * @intrg: Interrogate TCW Address + */ +struct tcw { + u32 format:2; + u32 :6; + u32 flags:24; + u32 :8; + u32 tccbl:6; + u32 r:1; + u32 w:1; + u32 :16; + u64 output; + u64 input; + u64 tsb; + u64 tccb; + u32 output_count; + u32 input_count; + u32 :32; + u32 :32; + u32 :32; + u32 intrg; +} __attribute__ ((packed, aligned(64))); + +#define TIDAW_FLAGS_LAST 1 << (7 - 0) +#define TIDAW_FLAGS_SKIP 1 << (7 - 1) +#define TIDAW_FLAGS_DATA_INT 1 << (7 - 2) +#define TIDAW_FLAGS_TTIC 1 << (7 - 3) +#define TIDAW_FLAGS_INSERT_CBC 1 << (7 - 4) + +/** + * struct tidaw - Transport-Indirect-Addressing Word (TIDAW) + * @flags: TIDAW flags. Can be an arithmetic OR of the following constants: + * %TIDAW_FLAGS_LAST, %TIDAW_FLAGS_SKIP, %TIDAW_FLAGS_DATA_INT, + * %TIDAW_FLAGS_TTIC, %TIDAW_FLAGS_INSERT_CBC + * @count: Count + * @addr: Address + */ +struct tidaw { + u32 flags:8; + u32 :24; + u32 count; + u64 addr; +} __attribute__ ((packed, aligned(16))); + +/** + * struct tsa_iostat - I/O-Status Transport-Status Area (IO-Stat TSA) + * @dev_time: Device Time + * @def_time: Defer Time + * @queue_time: Queue Time + * @dev_busy_time: Device-Busy Time + * @dev_act_time: Device-Active-Only Time + * @sense: Sense Data (if present) + */ +struct tsa_iostat { + u32 dev_time; + u32 def_time; + u32 queue_time; + u32 dev_busy_time; + u32 dev_act_time; + u8 sense[32]; +} __attribute__ ((packed)); + +/** + * struct tsa_ddpcs - Device-Detected-Program-Check Transport-Status Area (DDPC TSA) + * @rc: Reason Code + * @rcq: Reason Code Qualifier + * @sense: Sense Data (if present) + */ +struct tsa_ddpc { + u32 :24; + u32 rc:8; + u8 rcq[16]; + u8 sense[32]; +} __attribute__ ((packed)); + +#define TSA_INTRG_FLAGS_CU_STATE_VALID 1 << (7 - 0) +#define TSA_INTRG_FLAGS_DEV_STATE_VALID 1 << (7 - 1) +#define TSA_INTRG_FLAGS_OP_STATE_VALID 1 << (7 - 2) + +/** + * struct tsa_intrg - Interrogate Transport-Status Area (Intrg. TSA) + * @format: Format + * @flags: Flags. Can be an arithmetic OR of the following constants: + * %TSA_INTRG_FLAGS_CU_STATE_VALID, %TSA_INTRG_FLAGS_DEV_STATE_VALID, + * %TSA_INTRG_FLAGS_OP_STATE_VALID + * @cu_state: Controle-Unit State + * @dev_state: Device State + * @op_state: Operation State + * @sd_info: State-Dependent Information + * @dl_id: Device-Level Identifier + * @dd_data: Device-Dependent Data + */ +struct tsa_intrg { + u32 format:8; + u32 flags:8; + u32 cu_state:8; + u32 dev_state:8; + u32 op_state:8; + u32 :24; + u8 sd_info[12]; + u32 dl_id; + u8 dd_data[28]; +} __attribute__ ((packed)); + +#define TSB_FORMAT_NONE 0 +#define TSB_FORMAT_IOSTAT 1 +#define TSB_FORMAT_DDPC 2 +#define TSB_FORMAT_INTRG 3 + +#define TSB_FLAGS_DCW_OFFSET_VALID 1 << (7 - 0) +#define TSB_FLAGS_COUNT_VALID 1 << (7 - 1) +#define TSB_FLAGS_CACHE_MISS 1 << (7 - 2) +#define TSB_FLAGS_TIME_VALID 1 << (7 - 3) +#define TSB_FLAGS_FORMAT(x) ((x) & 7) +#define TSB_FORMAT(t) ((t)->flags & 7) + +/** + * struct tsb - Transport-Status Block (TSB) + * @length: Length + * @flags: Flags. Can be an arithmetic OR of the following constants: + * %TSB_FLAGS_DCW_OFFSET_VALID, %TSB_FLAGS_COUNT_VALID, %TSB_FLAGS_CACHE_MISS, + * %TSB_FLAGS_TIME_VALID + * @dcw_offset: DCW Offset + * @count: Count + * @tsa: Transport-Status-Area + */ +struct tsb { + u32 length:8; + u32 flags:8; + u32 dcw_offset:16; + u32 count; + u32 :32; + union { + struct tsa_iostat iostat; + struct tsa_ddpc ddpc; + struct tsa_intrg intrg; + } __attribute__ ((packed)) tsa; +} __attribute__ ((packed, aligned(8))); + +#define DCW_INTRG_FORMAT_DEFAULT 0 + +#define DCW_INTRG_RC_UNSPECIFIED 0 +#define DCW_INTRG_RC_TIMEOUT 1 + +#define DCW_INTRG_RCQ_UNSPECIFIED 0 +#define DCW_INTRG_RCQ_PRIMARY 1 +#define DCW_INTRG_RCQ_SECONDARY 2 + +#define DCW_INTRG_FLAGS_MPM 1 < (7 - 0) +#define DCW_INTRG_FLAGS_PPR 1 < (7 - 1) +#define DCW_INTRG_FLAGS_CRIT 1 < (7 - 2) + +/** + * struct dcw_intrg_data - Interrogate DCW data + * @format: Format. Should be %DCW_INTRG_FORMAT_DEFAULT + * @rc: Reason Code. Can be one of %DCW_INTRG_RC_UNSPECIFIED, + * %DCW_INTRG_RC_TIMEOUT + * @rcq: Reason Code Qualifier: Can be one of %DCW_INTRG_RCQ_UNSPECIFIED, + * %DCW_INTRG_RCQ_PRIMARY, %DCW_INTRG_RCQ_SECONDARY + * @lpm: Logical-Path Mask + * @pam: Path-Available Mask + * @pim: Path-Installed Mask + * @timeout: Timeout + * @flags: Flags. Can be an arithmetic OR of %DCW_INTRG_FLAGS_MPM, + * %DCW_INTRG_FLAGS_PPR, %DCW_INTRG_FLAGS_CRIT + * @time: Time + * @prog_id: Program Identifier + * @prog_data: Program-Dependent Data + */ +struct dcw_intrg_data { + u32 format:8; + u32 rc:8; + u32 rcq:8; + u32 lpm:8; + u32 pam:8; + u32 pim:8; + u32 timeout:16; + u32 flags:8; + u32 :24; + u32 :32; + u64 time; + u64 prog_id; + u8 prog_data[0]; +} __attribute__ ((packed)); + +#define DCW_FLAGS_CC 1 << (7 - 1) + +#define DCW_CMD_WRITE 0x01 +#define DCW_CMD_READ 0x02 +#define DCW_CMD_CONTROL 0x03 +#define DCW_CMD_SENSE 0x04 +#define DCW_CMD_SENSE_ID 0xe4 +#define DCW_CMD_INTRG 0x40 + +/** + * struct dcw - Device-Command Word (DCW) + * @cmd: Command Code. Can be one of %DCW_CMD_WRITE, %DCW_CMD_READ, + * %DCW_CMD_CONTROL, %DCW_CMD_SENSE, %DCW_CMD_SENSE_ID, %DCW_CMD_INTRG + * @flags: Flags. Can be an arithmetic OR of %DCW_FLAGS_CC + * @cd_count: Control-Data Count + * @count: Count + * @cd: Control Data + */ +struct dcw { + u32 cmd:8; + u32 flags:8; + u32 :8; + u32 cd_count:8; + u32 count; + u8 cd[0]; +} __attribute__ ((packed)); + +#define TCCB_FORMAT_DEFAULT 0x7f +#define TCCB_MAX_DCW 30 +#define TCCB_MAX_SIZE (sizeof(struct tccb_tcah) + \ + TCCB_MAX_DCW * sizeof(struct dcw) + \ + sizeof(struct tccb_tcat)) +#define TCCB_SAC_DEFAULT 0xf901 +#define TCCB_SAC_INTRG 0xf902 + +/** + * struct tccb_tcah - Transport-Command-Area Header (TCAH) + * @format: Format. Should be %TCCB_FORMAT_DEFAULT + * @tcal: Transport-Command-Area Length + * @sac: Service-Action Code. Can be one of %TCCB_SAC_DEFAULT, %TCCB_SAC_INTRG + * @prio: Priority + */ +struct tccb_tcah { + u32 format:8; + u32 :24; + u32 :24; + u32 tcal:8; + u32 sac:16; + u32 :8; + u32 prio:8; + u32 :32; +} __attribute__ ((packed)); + +/** + * struct tccb_tcat - Transport-Command-Area Trailer (TCAT) + * @count: Transport Count + */ +struct tccb_tcat { + u32 :32; + u32 count; +} __attribute__ ((packed)); + +/** + * struct tccb - (partial) Transport-Command-Control Block (TCCB) + * @tcah: TCAH + * @tca: Transport-Command Area + */ +struct tccb { + struct tccb_tcah tcah; + u8 tca[0]; +} __attribute__ ((packed, aligned(8))); + +struct tcw *tcw_get_intrg(struct tcw *tcw); +void *tcw_get_data(struct tcw *tcw); +struct tccb *tcw_get_tccb(struct tcw *tcw); +struct tsb *tcw_get_tsb(struct tcw *tcw); + +void tcw_init(struct tcw *tcw, int r, int w); +void tcw_finalize(struct tcw *tcw, int num_tidaws); + +void tcw_set_intrg(struct tcw *tcw, struct tcw *intrg_tcw); +void tcw_set_data(struct tcw *tcw, void *data, int use_tidal); +void tcw_set_tccb(struct tcw *tcw, struct tccb *tccb); +void tcw_set_tsb(struct tcw *tcw, struct tsb *tsb); + +void tccb_init(struct tccb *tccb, size_t tccb_size, u32 sac); +void tsb_init(struct tsb *tsb); +struct dcw *tccb_add_dcw(struct tccb *tccb, size_t tccb_size, u8 cmd, u8 flags, + void *cd, u8 cd_count, u32 count); +struct tidaw *tcw_add_tidaw(struct tcw *tcw, int num_tidaws, u8 flags, + void *addr, u32 count); + +#endif /* _ASM_S390_FCX_H */ diff --git a/arch/s390/include/asm/futex.h b/arch/s390/include/asm/futex.h new file mode 100644 index 000000000000..5c5d02de49e9 --- /dev/null +++ b/arch/s390/include/asm/futex.h @@ -0,0 +1,52 @@ +#ifndef _ASM_S390_FUTEX_H +#define _ASM_S390_FUTEX_H + +#ifdef __KERNEL__ + +#include +#include +#include + +static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval, ret; + + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + ret = uaccess.futex_atomic_op(op, uaddr, oparg, &oldval); + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +static inline int futex_atomic_cmpxchg_inatomic(int __user *uaddr, + int oldval, int newval) +{ + if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + return uaccess.futex_atomic_cmpxchg(uaddr, oldval, newval); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_S390_FUTEX_H */ diff --git a/arch/s390/include/asm/hardirq.h b/arch/s390/include/asm/hardirq.h new file mode 100644 index 000000000000..89ec7056da28 --- /dev/null +++ b/arch/s390/include/asm/hardirq.h @@ -0,0 +1,51 @@ +/* + * include/asm-s390/hardirq.h + * + * S390 version + * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), + * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) + * + * Derived from "include/asm-i386/hardirq.h" + */ + +#ifndef __ASM_HARDIRQ_H +#define __ASM_HARDIRQ_H + +#include +#include +#include +#include +#include + +/* irq_cpustat_t is unused currently, but could be converted + * into a percpu variable instead of storing softirq_pending + * on the lowcore */ +typedef struct { + unsigned int __softirq_pending; +} irq_cpustat_t; + +#define local_softirq_pending() (S390_lowcore.softirq_pending) + +#define __ARCH_IRQ_STAT +#define __ARCH_HAS_DO_SOFTIRQ + +#define HARDIRQ_BITS 8 + +void clock_comparator_work(void); + +static inline unsigned long long local_tick_disable(void) +{ + unsigned long long old; + + old = S390_lowcore.clock_comparator; + S390_lowcore.clock_comparator = -1ULL; + return old; +} + +static inline void local_tick_enable(unsigned long long comp) +{ + S390_lowcore.clock_comparator = comp; +} + +#endif /* __ASM_HARDIRQ_H */ diff --git a/arch/s390/include/asm/hugetlb.h b/arch/s390/include/asm/hugetlb.h new file mode 100644 index 000000000000..670a1d1745d2 --- /dev/null +++ b/arch/s390/include/asm/hugetlb.h @@ -0,0 +1,184 @@ +/* + * IBM System z Huge TLB Page Support for Kernel. + * + * Copyright IBM Corp. 2008 + * Author(s): Gerald Schaefer + */ + +#ifndef _ASM_S390_HUGETLB_H +#define _ASM_S390_HUGETLB_H + +#include +#include + + +#define is_hugepage_only_range(mm, addr, len) 0 +#define hugetlb_free_pgd_range free_pgd_range + +void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte); + +/* + * If the arch doesn't supply something else, assume that hugepage + * size aligned regions are ok without further preparation. + */ +static inline int prepare_hugepage_range(struct file *file, + unsigned long addr, unsigned long len) +{ + if (len & ~HPAGE_MASK) + return -EINVAL; + if (addr & ~HPAGE_MASK) + return -EINVAL; + return 0; +} + +#define hugetlb_prefault_arch_hook(mm) do { } while (0) + +int arch_prepare_hugepage(struct page *page); +void arch_release_hugepage(struct page *page); + +static inline pte_t pte_mkhuge(pte_t pte) +{ + /* + * PROT_NONE needs to be remapped from the pte type to the ste type. + * The HW invalid bit is also different for pte and ste. The pte + * invalid bit happens to be the same as the ste _SEGMENT_ENTRY_LARGE + * bit, so we don't have to clear it. + */ + if (pte_val(pte) & _PAGE_INVALID) { + if (pte_val(pte) & _PAGE_SWT) + pte_val(pte) |= _HPAGE_TYPE_NONE; + pte_val(pte) |= _SEGMENT_ENTRY_INV; + } + /* + * Clear SW pte bits SWT and SWX, there are no SW bits in a segment + * table entry. + */ + pte_val(pte) &= ~(_PAGE_SWT | _PAGE_SWX); + /* + * Also set the change-override bit because we don't need dirty bit + * tracking for hugetlbfs pages. + */ + pte_val(pte) |= (_SEGMENT_ENTRY_LARGE | _SEGMENT_ENTRY_CO); + return pte; +} + +static inline pte_t huge_pte_wrprotect(pte_t pte) +{ + pte_val(pte) |= _PAGE_RO; + return pte; +} + +static inline int huge_pte_none(pte_t pte) +{ + return (pte_val(pte) & _SEGMENT_ENTRY_INV) && + !(pte_val(pte) & _SEGMENT_ENTRY_RO); +} + +static inline pte_t huge_ptep_get(pte_t *ptep) +{ + pte_t pte = *ptep; + unsigned long mask; + + if (!MACHINE_HAS_HPAGE) { + ptep = (pte_t *) (pte_val(pte) & _SEGMENT_ENTRY_ORIGIN); + if (ptep) { + mask = pte_val(pte) & + (_SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO); + pte = pte_mkhuge(*ptep); + pte_val(pte) |= mask; + } + } + return pte; +} + +static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + pte_t pte = huge_ptep_get(ptep); + + pmd_clear((pmd_t *) ptep); + return pte; +} + +static inline void __pmd_csp(pmd_t *pmdp) +{ + register unsigned long reg2 asm("2") = pmd_val(*pmdp); + register unsigned long reg3 asm("3") = pmd_val(*pmdp) | + _SEGMENT_ENTRY_INV; + register unsigned long reg4 asm("4") = ((unsigned long) pmdp) + 5; + + asm volatile( + " csp %1,%3" + : "=m" (*pmdp) + : "d" (reg2), "d" (reg3), "d" (reg4), "m" (*pmdp) : "cc"); + pmd_val(*pmdp) = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY; +} + +static inline void __pmd_idte(unsigned long address, pmd_t *pmdp) +{ + unsigned long sto = (unsigned long) pmdp - + pmd_index(address) * sizeof(pmd_t); + + if (!(pmd_val(*pmdp) & _SEGMENT_ENTRY_INV)) { + asm volatile( + " .insn rrf,0xb98e0000,%2,%3,0,0" + : "=m" (*pmdp) + : "m" (*pmdp), "a" (sto), + "a" ((address & HPAGE_MASK)) + ); + } + pmd_val(*pmdp) = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY; +} + +static inline void huge_ptep_invalidate(struct mm_struct *mm, + unsigned long address, pte_t *ptep) +{ + pmd_t *pmdp = (pmd_t *) ptep; + + if (!MACHINE_HAS_IDTE) { + __pmd_csp(pmdp); + if (mm->context.noexec) { + pmdp = get_shadow_table(pmdp); + __pmd_csp(pmdp); + } + return; + } + + __pmd_idte(address, pmdp); + if (mm->context.noexec) { + pmdp = get_shadow_table(pmdp); + __pmd_idte(address, pmdp); + } + return; +} + +#define huge_ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \ +({ \ + int __changed = !pte_same(huge_ptep_get(__ptep), __entry); \ + if (__changed) { \ + huge_ptep_invalidate((__vma)->vm_mm, __addr, __ptep); \ + set_huge_pte_at((__vma)->vm_mm, __addr, __ptep, __entry); \ + } \ + __changed; \ +}) + +#define huge_ptep_set_wrprotect(__mm, __addr, __ptep) \ +({ \ + pte_t __pte = huge_ptep_get(__ptep); \ + if (pte_write(__pte)) { \ + if (atomic_read(&(__mm)->mm_users) > 1 || \ + (__mm) != current->active_mm) \ + huge_ptep_invalidate(__mm, __addr, __ptep); \ + set_huge_pte_at(__mm, __addr, __ptep, \ + huge_pte_wrprotect(__pte)); \ + } \ +}) + +static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, + unsigned long address, pte_t *ptep) +{ + huge_ptep_invalidate(vma->vm_mm, address, ptep); +} + +#endif /* _ASM_S390_HUGETLB_H */ diff --git a/arch/s390/include/asm/idals.h b/arch/s390/include/asm/idals.h new file mode 100644 index 000000000000..e82c10efe65a --- /dev/null +++ b/arch/s390/include/asm/idals.h @@ -0,0 +1,256 @@ +/* + * File...........: linux/include/asm-s390x/idals.h + * Author(s)......: Holger Smolinski + * Martin Schwidefsky + * Bugreports.to..: + * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000a + + * History of changes + * 07/24/00 new file + * 05/04/02 code restructuring. + */ + +#ifndef _S390_IDALS_H +#define _S390_IDALS_H + +#include +#include +#include +#include +#include +#include + +#ifdef __s390x__ +#define IDA_SIZE_LOG 12 /* 11 for 2k , 12 for 4k */ +#else +#define IDA_SIZE_LOG 11 /* 11 for 2k , 12 for 4k */ +#endif +#define IDA_BLOCK_SIZE (1L<> 31) != 0; +#else + return 0; +#endif +} + + +/* + * Return the number of idal words needed for an address/length pair. + */ +static inline unsigned int +idal_nr_words(void *vaddr, unsigned int length) +{ +#ifdef __s390x__ + if (idal_is_needed(vaddr, length)) + return ((__pa(vaddr) & (IDA_BLOCK_SIZE-1)) + length + + (IDA_BLOCK_SIZE-1)) >> IDA_SIZE_LOG; +#endif + return 0; +} + +/* + * Create the list of idal words for an address/length pair. + */ +static inline unsigned long * +idal_create_words(unsigned long *idaws, void *vaddr, unsigned int length) +{ +#ifdef __s390x__ + unsigned long paddr; + unsigned int cidaw; + + paddr = __pa(vaddr); + cidaw = ((paddr & (IDA_BLOCK_SIZE-1)) + length + + (IDA_BLOCK_SIZE-1)) >> IDA_SIZE_LOG; + *idaws++ = paddr; + paddr &= -IDA_BLOCK_SIZE; + while (--cidaw > 0) { + paddr += IDA_BLOCK_SIZE; + *idaws++ = paddr; + } +#endif + return idaws; +} + +/* + * Sets the address of the data in CCW. + * If necessary it allocates an IDAL and sets the appropriate flags. + */ +static inline int +set_normalized_cda(struct ccw1 * ccw, void *vaddr) +{ +#ifdef __s390x__ + unsigned int nridaws; + unsigned long *idal; + + if (ccw->flags & CCW_FLAG_IDA) + return -EINVAL; + nridaws = idal_nr_words(vaddr, ccw->count); + if (nridaws > 0) { + idal = kmalloc(nridaws * sizeof(unsigned long), + GFP_ATOMIC | GFP_DMA ); + if (idal == NULL) + return -ENOMEM; + idal_create_words(idal, vaddr, ccw->count); + ccw->flags |= CCW_FLAG_IDA; + vaddr = idal; + } +#endif + ccw->cda = (__u32)(unsigned long) vaddr; + return 0; +} + +/* + * Releases any allocated IDAL related to the CCW. + */ +static inline void +clear_normalized_cda(struct ccw1 * ccw) +{ +#ifdef __s390x__ + if (ccw->flags & CCW_FLAG_IDA) { + kfree((void *)(unsigned long) ccw->cda); + ccw->flags &= ~CCW_FLAG_IDA; + } +#endif + ccw->cda = 0; +} + +/* + * Idal buffer extension + */ +struct idal_buffer { + size_t size; + size_t page_order; + void *data[0]; +}; + +/* + * Allocate an idal buffer + */ +static inline struct idal_buffer * +idal_buffer_alloc(size_t size, int page_order) +{ + struct idal_buffer *ib; + int nr_chunks, nr_ptrs, i; + + nr_ptrs = (size + IDA_BLOCK_SIZE - 1) >> IDA_SIZE_LOG; + nr_chunks = (4096 << page_order) >> IDA_SIZE_LOG; + ib = kmalloc(sizeof(struct idal_buffer) + nr_ptrs*sizeof(void *), + GFP_DMA | GFP_KERNEL); + if (ib == NULL) + return ERR_PTR(-ENOMEM); + ib->size = size; + ib->page_order = page_order; + for (i = 0; i < nr_ptrs; i++) { + if ((i & (nr_chunks - 1)) != 0) { + ib->data[i] = ib->data[i-1] + IDA_BLOCK_SIZE; + continue; + } + ib->data[i] = (void *) + __get_free_pages(GFP_KERNEL, page_order); + if (ib->data[i] != NULL) + continue; + // Not enough memory + while (i >= nr_chunks) { + i -= nr_chunks; + free_pages((unsigned long) ib->data[i], + ib->page_order); + } + kfree(ib); + return ERR_PTR(-ENOMEM); + } + return ib; +} + +/* + * Free an idal buffer. + */ +static inline void +idal_buffer_free(struct idal_buffer *ib) +{ + int nr_chunks, nr_ptrs, i; + + nr_ptrs = (ib->size + IDA_BLOCK_SIZE - 1) >> IDA_SIZE_LOG; + nr_chunks = (4096 << ib->page_order) >> IDA_SIZE_LOG; + for (i = 0; i < nr_ptrs; i += nr_chunks) + free_pages((unsigned long) ib->data[i], ib->page_order); + kfree(ib); +} + +/* + * Test if a idal list is really needed. + */ +static inline int +__idal_buffer_is_needed(struct idal_buffer *ib) +{ +#ifdef __s390x__ + return ib->size > (4096ul << ib->page_order) || + idal_is_needed(ib->data[0], ib->size); +#else + return ib->size > (4096ul << ib->page_order); +#endif +} + +/* + * Set channel data address to idal buffer. + */ +static inline void +idal_buffer_set_cda(struct idal_buffer *ib, struct ccw1 *ccw) +{ + if (__idal_buffer_is_needed(ib)) { + // setup idals; + ccw->cda = (u32)(addr_t) ib->data; + ccw->flags |= CCW_FLAG_IDA; + } else + // we do not need idals - use direct addressing + ccw->cda = (u32)(addr_t) ib->data[0]; + ccw->count = ib->size; +} + +/* + * Copy count bytes from an idal buffer to user memory + */ +static inline size_t +idal_buffer_to_user(struct idal_buffer *ib, void __user *to, size_t count) +{ + size_t left; + int i; + + BUG_ON(count > ib->size); + for (i = 0; count > IDA_BLOCK_SIZE; i++) { + left = copy_to_user(to, ib->data[i], IDA_BLOCK_SIZE); + if (left) + return left + count - IDA_BLOCK_SIZE; + to = (void __user *) to + IDA_BLOCK_SIZE; + count -= IDA_BLOCK_SIZE; + } + return copy_to_user(to, ib->data[i], count); +} + +/* + * Copy count bytes from user memory to an idal buffer + */ +static inline size_t +idal_buffer_from_user(struct idal_buffer *ib, const void __user *from, size_t count) +{ + size_t left; + int i; + + BUG_ON(count > ib->size); + for (i = 0; count > IDA_BLOCK_SIZE; i++) { + left = copy_from_user(ib->data[i], from, IDA_BLOCK_SIZE); + if (left) + return left + count - IDA_BLOCK_SIZE; + from = (void __user *) from + IDA_BLOCK_SIZE; + count -= IDA_BLOCK_SIZE; + } + return copy_from_user(ib->data[i], from, count); +} + +#endif diff --git a/arch/s390/include/asm/io.h b/arch/s390/include/asm/io.h new file mode 100644 index 000000000000..b7ff6afc3caa --- /dev/null +++ b/arch/s390/include/asm/io.h @@ -0,0 +1,54 @@ +/* + * include/asm-s390/io.h + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) + * + * Derived from "include/asm-i386/io.h" + */ + +#ifndef _S390_IO_H +#define _S390_IO_H + +#ifdef __KERNEL__ + +#include + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * Change virtual addresses to physical addresses and vv. + * These are pretty trivial + */ +static inline unsigned long virt_to_phys(volatile void * address) +{ + unsigned long real_address; + asm volatile( + " lra %0,0(%1)\n" + " jz 0f\n" + " la %0,0\n" + "0:" + : "=a" (real_address) : "a" (address) : "cc"); + return real_address; +} + +static inline void * phys_to_virt(unsigned long address) +{ + return (void *) address; +} + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/s390/include/asm/ioctl.h b/arch/s390/include/asm/ioctl.h new file mode 100644 index 000000000000..b279fe06dfe5 --- /dev/null +++ b/arch/s390/include/asm/ioctl.h @@ -0,0 +1 @@ +#include diff --git a/arch/s390/include/asm/ioctls.h b/arch/s390/include/asm/ioctls.h new file mode 100644 index 000000000000..40e481b1b461 --- /dev/null +++ b/arch/s390/include/asm/ioctls.h @@ -0,0 +1,92 @@ +/* + * include/asm-s390/ioctls.h + * + * S390 version + * + * Derived from "include/asm-i386/ioctls.h" + */ + +#ifndef __ARCH_S390_IOCTLS_H__ +#define __ARCH_S390_IOCTLS_H__ + +#include + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define FIOQSIZE 0x545E + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif diff --git a/arch/s390/include/asm/ipcbuf.h b/arch/s390/include/asm/ipcbuf.h new file mode 100644 index 000000000000..37f293d12c8f --- /dev/null +++ b/arch/s390/include/asm/ipcbuf.h @@ -0,0 +1,31 @@ +#ifndef __S390_IPCBUF_H__ +#define __S390_IPCBUF_H__ + +/* + * The user_ipc_perm structure for S/390 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; +#ifndef __s390x__ + unsigned short __pad2; +#endif /* ! __s390x__ */ + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __S390_IPCBUF_H__ */ diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h new file mode 100644 index 000000000000..1171e6d144a3 --- /dev/null +++ b/arch/s390/include/asm/ipl.h @@ -0,0 +1,168 @@ +/* + * s390 (re)ipl support + * + * Copyright IBM Corp. 2007 + */ + +#ifndef _ASM_S390_IPL_H +#define _ASM_S390_IPL_H + +#include +#include +#include + +#define IPL_PARMBLOCK_ORIGIN 0x2000 + +#define IPL_PARM_BLK_FCP_LEN (sizeof(struct ipl_list_hdr) + \ + sizeof(struct ipl_block_fcp)) + +#define IPL_PARM_BLK0_FCP_LEN (sizeof(struct ipl_block_fcp) + 8) + +#define IPL_PARM_BLK_CCW_LEN (sizeof(struct ipl_list_hdr) + \ + sizeof(struct ipl_block_ccw)) + +#define IPL_PARM_BLK0_CCW_LEN (sizeof(struct ipl_block_ccw) + 8) + +#define IPL_MAX_SUPPORTED_VERSION (0) + +#define IPL_PARMBLOCK_START ((struct ipl_parameter_block *) \ + IPL_PARMBLOCK_ORIGIN) +#define IPL_PARMBLOCK_SIZE (IPL_PARMBLOCK_START->hdr.len) + +struct ipl_list_hdr { + u32 len; + u8 reserved1[3]; + u8 version; + u32 blk0_len; + u8 pbt; + u8 flags; + u16 reserved2; +} __attribute__((packed)); + +struct ipl_block_fcp { + u8 reserved1[313-1]; + u8 opt; + u8 reserved2[3]; + u16 reserved3; + u16 devno; + u8 reserved4[4]; + u64 wwpn; + u64 lun; + u32 bootprog; + u8 reserved5[12]; + u64 br_lba; + u32 scp_data_len; + u8 reserved6[260]; + u8 scp_data[]; +} __attribute__((packed)); + +#define DIAG308_VMPARM_SIZE 64 + +struct ipl_block_ccw { + u8 load_parm[8]; + u8 reserved1[84]; + u8 reserved2[2]; + u16 devno; + u8 vm_flags; + u8 reserved3[3]; + u32 vm_parm_len; + u8 nss_name[8]; + u8 vm_parm[DIAG308_VMPARM_SIZE]; + u8 reserved4[8]; +} __attribute__((packed)); + +struct ipl_parameter_block { + struct ipl_list_hdr hdr; + union { + struct ipl_block_fcp fcp; + struct ipl_block_ccw ccw; + } ipl_info; +} __attribute__((packed,aligned(4096))); + +/* + * IPL validity flags + */ +extern u32 ipl_flags; +extern u32 dump_prefix_page; +extern unsigned int zfcpdump_prefix_array[]; + +extern void do_reipl(void); +extern void do_halt(void); +extern void do_poff(void); +extern void ipl_save_parameters(void); +extern void ipl_update_parameters(void); +extern void get_ipl_vmparm(char *); + +enum { + IPL_DEVNO_VALID = 1, + IPL_PARMBLOCK_VALID = 2, + IPL_NSS_VALID = 4, +}; + +enum ipl_type { + IPL_TYPE_UNKNOWN = 1, + IPL_TYPE_CCW = 2, + IPL_TYPE_FCP = 4, + IPL_TYPE_FCP_DUMP = 8, + IPL_TYPE_NSS = 16, +}; + +struct ipl_info +{ + enum ipl_type type; + union { + struct { + struct ccw_dev_id dev_id; + } ccw; + struct { + struct ccw_dev_id dev_id; + u64 wwpn; + u64 lun; + } fcp; + struct { + char name[NSS_NAME_SIZE + 1]; + } nss; + } data; +}; + +extern struct ipl_info ipl_info; +extern void setup_ipl(void); + +/* + * DIAG 308 support + */ +enum diag308_subcode { + DIAG308_REL_HSA = 2, + DIAG308_IPL = 3, + DIAG308_DUMP = 4, + DIAG308_SET = 5, + DIAG308_STORE = 6, +}; + +enum diag308_ipl_type { + DIAG308_IPL_TYPE_FCP = 0, + DIAG308_IPL_TYPE_CCW = 2, +}; + +enum diag308_opt { + DIAG308_IPL_OPT_IPL = 0x10, + DIAG308_IPL_OPT_DUMP = 0x20, +}; + +enum diag308_flags { + DIAG308_FLAGS_LP_VALID = 0x80, +}; + +enum diag308_vm_flags { + DIAG308_VM_FLAGS_NSS_VALID = 0x80, + DIAG308_VM_FLAGS_VP_VALID = 0x40, +}; + +enum diag308_rc { + DIAG308_RC_OK = 0x0001, + DIAG308_RC_NOCONFIG = 0x0102, +}; + +extern int diag308(unsigned long subcode, void *addr); + +#endif /* _ASM_S390_IPL_H */ diff --git a/arch/s390/include/asm/irq.h b/arch/s390/include/asm/irq.h new file mode 100644 index 000000000000..7da991a858f8 --- /dev/null +++ b/arch/s390/include/asm/irq.h @@ -0,0 +1,23 @@ +#ifndef _ASM_IRQ_H +#define _ASM_IRQ_H + +#ifdef __KERNEL__ +#include + +/* + * the definition of irqs has changed in 2.5.46: + * NR_IRQS is no longer the number of i/o + * interrupts (65536), but rather the number + * of interrupt classes (2). + * Only external and i/o interrupts make much sense here (CH). + */ + +enum interruption_class { + EXTERNAL_INTERRUPT, + IO_INTERRUPT, + + NR_IRQS, +}; + +#endif /* __KERNEL__ */ +#endif diff --git a/arch/s390/include/asm/irq_regs.h b/arch/s390/include/asm/irq_regs.h new file mode 100644 index 000000000000..3dd9c0b70270 --- /dev/null +++ b/arch/s390/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include diff --git a/arch/s390/include/asm/irqflags.h b/arch/s390/include/asm/irqflags.h new file mode 100644 index 000000000000..3f26131120b7 --- /dev/null +++ b/arch/s390/include/asm/irqflags.h @@ -0,0 +1,106 @@ +/* + * include/asm-s390/irqflags.h + * + * Copyright (C) IBM Corp. 2006 + * Author(s): Heiko Carstens + */ + +#ifndef __ASM_IRQFLAGS_H +#define __ASM_IRQFLAGS_H + +#ifdef __KERNEL__ + +#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) + +/* store then or system mask. */ +#define __raw_local_irq_stosm(__or) \ +({ \ + unsigned long __mask; \ + asm volatile( \ + " stosm %0,%1" \ + : "=Q" (__mask) : "i" (__or) : "memory"); \ + __mask; \ +}) + +/* store then and system mask. */ +#define __raw_local_irq_stnsm(__and) \ +({ \ + unsigned long __mask; \ + asm volatile( \ + " stnsm %0,%1" \ + : "=Q" (__mask) : "i" (__and) : "memory"); \ + __mask; \ +}) + +/* set system mask. */ +#define __raw_local_irq_ssm(__mask) \ +({ \ + asm volatile("ssm %0" : : "Q" (__mask) : "memory"); \ +}) + +#else /* __GNUC__ */ + +/* store then or system mask. */ +#define __raw_local_irq_stosm(__or) \ +({ \ + unsigned long __mask; \ + asm volatile( \ + " stosm 0(%1),%2" \ + : "=m" (__mask) \ + : "a" (&__mask), "i" (__or) : "memory"); \ + __mask; \ +}) + +/* store then and system mask. */ +#define __raw_local_irq_stnsm(__and) \ +({ \ + unsigned long __mask; \ + asm volatile( \ + " stnsm 0(%1),%2" \ + : "=m" (__mask) \ + : "a" (&__mask), "i" (__and) : "memory"); \ + __mask; \ +}) + +/* set system mask. */ +#define __raw_local_irq_ssm(__mask) \ +({ \ + asm volatile( \ + " ssm 0(%0)" \ + : : "a" (&__mask), "m" (__mask) : "memory"); \ +}) + +#endif /* __GNUC__ */ + +/* interrupt control.. */ +static inline unsigned long raw_local_irq_enable(void) +{ + return __raw_local_irq_stosm(0x03); +} + +static inline unsigned long raw_local_irq_disable(void) +{ + return __raw_local_irq_stnsm(0xfc); +} + +#define raw_local_save_flags(x) \ +do { \ + typecheck(unsigned long, x); \ + (x) = __raw_local_irq_stosm(0x00); \ +} while (0) + +static inline void raw_local_irq_restore(unsigned long flags) +{ + __raw_local_irq_ssm(flags); +} + +static inline int raw_irqs_disabled_flags(unsigned long flags) +{ + return !(flags & (3UL << (BITS_PER_LONG - 8))); +} + +/* For spinlocks etc */ +#define raw_local_irq_save(x) ((x) = raw_local_irq_disable()) + +#endif /* __KERNEL__ */ +#endif /* __ASM_IRQFLAGS_H */ diff --git a/arch/s390/include/asm/isc.h b/arch/s390/include/asm/isc.h new file mode 100644 index 000000000000..34bb8916db4f --- /dev/null +++ b/arch/s390/include/asm/isc.h @@ -0,0 +1,25 @@ +#ifndef _ASM_S390_ISC_H +#define _ASM_S390_ISC_H + +#include + +/* + * I/O interruption subclasses used by drivers. + * Please add all used iscs here so that it is possible to distribute + * isc usage between drivers. + * Reminder: 0 is highest priority, 7 lowest. + */ +#define MAX_ISC 7 + +/* Regular I/O interrupts. */ +#define IO_SCH_ISC 3 /* regular I/O subchannels */ +#define CONSOLE_ISC 1 /* console I/O subchannel */ +#define CHSC_SCH_ISC 7 /* CHSC subchannels */ +/* Adapter interrupts. */ +#define QDIO_AIRQ_ISC IO_SCH_ISC /* I/O subchannel in qdio mode */ + +/* Functions for registration of I/O interruption subclasses */ +void isc_register(unsigned int isc); +void isc_unregister(unsigned int isc); + +#endif /* _ASM_S390_ISC_H */ diff --git a/arch/s390/include/asm/itcw.h b/arch/s390/include/asm/itcw.h new file mode 100644 index 000000000000..a9bc5c36b32a --- /dev/null +++ b/arch/s390/include/asm/itcw.h @@ -0,0 +1,30 @@ +/* + * Functions for incremental construction of fcx enabled I/O control blocks. + * + * Copyright IBM Corp. 2008 + * Author(s): Peter Oberparleiter + */ + +#ifndef _ASM_S390_ITCW_H +#define _ASM_S390_ITCW_H _ASM_S390_ITCW_H + +#include +#include + +#define ITCW_OP_READ 0 +#define ITCW_OP_WRITE 1 + +struct itcw; + +struct tcw *itcw_get_tcw(struct itcw *itcw); +size_t itcw_calc_size(int intrg, int max_tidaws, int intrg_max_tidaws); +struct itcw *itcw_init(void *buffer, size_t size, int op, int intrg, + int max_tidaws, int intrg_max_tidaws); +struct dcw *itcw_add_dcw(struct itcw *itcw, u8 cmd, u8 flags, void *cd, + u8 cd_count, u32 count); +struct tidaw *itcw_add_tidaw(struct itcw *itcw, u8 flags, void *addr, + u32 count); +void itcw_set_data(struct itcw *itcw, void *addr, int use_tidal); +void itcw_finalize(struct itcw *itcw); + +#endif /* _ASM_S390_ITCW_H */ diff --git a/arch/s390/include/asm/kdebug.h b/arch/s390/include/asm/kdebug.h new file mode 100644 index 000000000000..40db27cd6e60 --- /dev/null +++ b/arch/s390/include/asm/kdebug.h @@ -0,0 +1,27 @@ +#ifndef _S390_KDEBUG_H +#define _S390_KDEBUG_H + +/* + * Feb 2006 Ported to s390 + */ + +struct pt_regs; + +enum die_val { + DIE_OOPS = 1, + DIE_BPT, + DIE_SSTEP, + DIE_PANIC, + DIE_NMI, + DIE_DIE, + DIE_NMIWATCHDOG, + DIE_KERNELDEBUG, + DIE_TRAP, + DIE_GPF, + DIE_CALL, + DIE_NMI_IPI, +}; + +extern void die(const char *, struct pt_regs *, long); + +#endif diff --git a/arch/s390/include/asm/kexec.h b/arch/s390/include/asm/kexec.h new file mode 100644 index 000000000000..f219c6411e0b --- /dev/null +++ b/arch/s390/include/asm/kexec.h @@ -0,0 +1,43 @@ +/* + * include/asm-s390/kexec.h + * + * (C) Copyright IBM Corp. 2005 + * + * Author(s): Rolf Adelsberger + * + */ + +#ifndef _S390_KEXEC_H +#define _S390_KEXEC_H + +#ifdef __KERNEL__ +#include +#endif +#include +/* + * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return. + * I.e. Maximum page that is mapped directly into kernel memory, + * and kmap is not required. + */ + +/* Maximum physical address we can use pages from */ +#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) + +/* Maximum address we can reach in physical address mode */ +#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) + +/* Maximum address we can use for the control pages */ +/* Not more than 2GB */ +#define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31) + +/* Allocate one page for the pdp and the second for the code */ +#define KEXEC_CONTROL_CODE_SIZE 4096 + +/* The native architecture */ +#define KEXEC_ARCH KEXEC_ARCH_S390 + +/* Provide a dummy definition to avoid build failures. */ +static inline void crash_setup_regs(struct pt_regs *newregs, + struct pt_regs *oldregs) { } + +#endif /*_S390_KEXEC_H */ diff --git a/arch/s390/include/asm/kmap_types.h b/arch/s390/include/asm/kmap_types.h new file mode 100644 index 000000000000..fd1574648223 --- /dev/null +++ b/arch/s390/include/asm/kmap_types.h @@ -0,0 +1,23 @@ +#ifdef __KERNEL__ +#ifndef _ASM_KMAP_TYPES_H +#define _ASM_KMAP_TYPES_H + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif +#endif /* __KERNEL__ */ diff --git a/arch/s390/include/asm/kprobes.h b/arch/s390/include/asm/kprobes.h new file mode 100644 index 000000000000..330f68caffe4 --- /dev/null +++ b/arch/s390/include/asm/kprobes.h @@ -0,0 +1,103 @@ +#ifndef _ASM_S390_KPROBES_H +#define _ASM_S390_KPROBES_H +/* + * Kernel Probes (KProbes) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2002, 2006 + * + * 2002-Oct Created by Vamsi Krishna S Kernel + * Probes initial implementation ( includes suggestions from + * Rusty Russell). + * 2004-Nov Modified for PPC64 by Ananth N Mavinakayanahalli + * + * 2005-Dec Used as a template for s390 by Mike Grundy + * + */ +#include +#include +#include + +#define __ARCH_WANT_KPROBES_INSN_SLOT +struct pt_regs; +struct kprobe; + +typedef u16 kprobe_opcode_t; +#define BREAKPOINT_INSTRUCTION 0x0002 + +/* Maximum instruction size is 3 (16bit) halfwords: */ +#define MAX_INSN_SIZE 0x0003 +#define MAX_STACK_SIZE 64 +#define MIN_STACK_SIZE(ADDR) (((MAX_STACK_SIZE) < \ + (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) \ + ? (MAX_STACK_SIZE) \ + : (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) + +#define kretprobe_blacklist_size 0 + +#define KPROBE_SWAP_INST 0x10 + +#define FIXUP_PSW_NORMAL 0x08 +#define FIXUP_BRANCH_NOT_TAKEN 0x04 +#define FIXUP_RETURN_REGISTER 0x02 +#define FIXUP_NOT_REQUIRED 0x01 + +/* Architecture specific copy of original instruction */ +struct arch_specific_insn { + /* copy of original instruction */ + kprobe_opcode_t *insn; + int fixup; + int ilen; + int reg; +}; + +struct ins_replace_args { + kprobe_opcode_t *ptr; + kprobe_opcode_t old; + kprobe_opcode_t new; +}; +struct prev_kprobe { + struct kprobe *kp; + unsigned long status; + unsigned long saved_psw; + unsigned long kprobe_saved_imask; + unsigned long kprobe_saved_ctl[3]; +}; + +/* per-cpu kprobe control block */ +struct kprobe_ctlblk { + unsigned long kprobe_status; + unsigned long kprobe_saved_imask; + unsigned long kprobe_saved_ctl[3]; + struct pt_regs jprobe_saved_regs; + unsigned long jprobe_saved_r14; + unsigned long jprobe_saved_r15; + struct prev_kprobe prev_kprobe; + kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE]; +}; + +void arch_remove_kprobe(struct kprobe *p); +void kretprobe_trampoline(void); +int is_prohibited_opcode(kprobe_opcode_t *instruction); +void get_instruction_type(struct arch_specific_insn *ainsn); + +int kprobe_fault_handler(struct pt_regs *regs, int trapnr); +int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); + +#define flush_insn_slot(p) do { } while (0) + +#endif /* _ASM_S390_KPROBES_H */ diff --git a/arch/s390/include/asm/kvm.h b/arch/s390/include/asm/kvm.h new file mode 100644 index 000000000000..d74002f95794 --- /dev/null +++ b/arch/s390/include/asm/kvm.h @@ -0,0 +1,45 @@ +#ifndef __LINUX_KVM_S390_H +#define __LINUX_KVM_S390_H + +/* + * asm-s390/kvm.h - KVM s390 specific structures and definitions + * + * Copyright IBM Corp. 2008 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (version 2 only) + * as published by the Free Software Foundation. + * + * Author(s): Carsten Otte + * Christian Borntraeger + */ +#include + +/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */ +struct kvm_pic_state { + /* no PIC for s390 */ +}; + +struct kvm_ioapic_state { + /* no IOAPIC for s390 */ +}; + +/* for KVM_GET_REGS and KVM_SET_REGS */ +struct kvm_regs { + /* general purpose regs for s390 */ + __u64 gprs[16]; +}; + +/* for KVM_GET_SREGS and KVM_SET_SREGS */ +struct kvm_sregs { + __u32 acrs[16]; + __u64 crs[16]; +}; + +/* for KVM_GET_FPU and KVM_SET_FPU */ +struct kvm_fpu { + __u32 fpc; + __u64 fprs[16]; +}; + +#endif diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h new file mode 100644 index 000000000000..3c55e4107dcc --- /dev/null +++ b/arch/s390/include/asm/kvm_host.h @@ -0,0 +1,235 @@ +/* + * asm-s390/kvm_host.h - definition for kernel virtual machines on s390 + * + * Copyright IBM Corp. 2008 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (version 2 only) + * as published by the Free Software Foundation. + * + * Author(s): Carsten Otte + */ + + +#ifndef ASM_KVM_HOST_H +#define ASM_KVM_HOST_H +#include +#include + +#define KVM_MAX_VCPUS 64 +#define KVM_MEMORY_SLOTS 32 +/* memory slots that does not exposed to userspace */ +#define KVM_PRIVATE_MEM_SLOTS 4 + +struct kvm_guest_debug { +}; + +struct sca_entry { + atomic_t scn; + __u64 reserved; + __u64 sda; + __u64 reserved2[2]; +} __attribute__((packed)); + + +struct sca_block { + __u64 ipte_control; + __u64 reserved[5]; + __u64 mcn; + __u64 reserved2; + struct sca_entry cpu[64]; +} __attribute__((packed)); + +#define KVM_PAGES_PER_HPAGE 256 + +#define CPUSTAT_HOST 0x80000000 +#define CPUSTAT_WAIT 0x10000000 +#define CPUSTAT_ECALL_PEND 0x08000000 +#define CPUSTAT_STOP_INT 0x04000000 +#define CPUSTAT_IO_INT 0x02000000 +#define CPUSTAT_EXT_INT 0x01000000 +#define CPUSTAT_RUNNING 0x00800000 +#define CPUSTAT_RETAINED 0x00400000 +#define CPUSTAT_TIMING_SUB 0x00020000 +#define CPUSTAT_SIE_SUB 0x00010000 +#define CPUSTAT_RRF 0x00008000 +#define CPUSTAT_SLSV 0x00004000 +#define CPUSTAT_SLSR 0x00002000 +#define CPUSTAT_ZARCH 0x00000800 +#define CPUSTAT_MCDS 0x00000100 +#define CPUSTAT_SM 0x00000080 +#define CPUSTAT_G 0x00000008 +#define CPUSTAT_J 0x00000002 +#define CPUSTAT_P 0x00000001 + +struct kvm_s390_sie_block { + atomic_t cpuflags; /* 0x0000 */ + __u32 prefix; /* 0x0004 */ + __u8 reserved8[32]; /* 0x0008 */ + __u64 cputm; /* 0x0028 */ + __u64 ckc; /* 0x0030 */ + __u64 epoch; /* 0x0038 */ + __u8 reserved40[4]; /* 0x0040 */ +#define LCTL_CR0 0x8000 + __u16 lctl; /* 0x0044 */ + __s16 icpua; /* 0x0046 */ + __u32 ictl; /* 0x0048 */ + __u32 eca; /* 0x004c */ + __u8 icptcode; /* 0x0050 */ + __u8 reserved51; /* 0x0051 */ + __u16 ihcpu; /* 0x0052 */ + __u8 reserved54[2]; /* 0x0054 */ + __u16 ipa; /* 0x0056 */ + __u32 ipb; /* 0x0058 */ + __u32 scaoh; /* 0x005c */ + __u8 reserved60; /* 0x0060 */ + __u8 ecb; /* 0x0061 */ + __u8 reserved62[2]; /* 0x0062 */ + __u32 scaol; /* 0x0064 */ + __u8 reserved68[4]; /* 0x0068 */ + __u32 todpr; /* 0x006c */ + __u8 reserved70[16]; /* 0x0070 */ + __u64 gmsor; /* 0x0080 */ + __u64 gmslm; /* 0x0088 */ + psw_t gpsw; /* 0x0090 */ + __u64 gg14; /* 0x00a0 */ + __u64 gg15; /* 0x00a8 */ + __u8 reservedb0[30]; /* 0x00b0 */ + __u16 iprcc; /* 0x00ce */ + __u8 reservedd0[48]; /* 0x00d0 */ + __u64 gcr[16]; /* 0x0100 */ + __u64 gbea; /* 0x0180 */ + __u8 reserved188[120]; /* 0x0188 */ +} __attribute__((packed)); + +struct kvm_vcpu_stat { + u32 exit_userspace; + u32 exit_null; + u32 exit_external_request; + u32 exit_external_interrupt; + u32 exit_stop_request; + u32 exit_validity; + u32 exit_instruction; + u32 instruction_lctl; + u32 instruction_lctlg; + u32 exit_program_interruption; + u32 exit_instr_and_program; + u32 deliver_emergency_signal; + u32 deliver_service_signal; + u32 deliver_virtio_interrupt; + u32 deliver_stop_signal; + u32 deliver_prefix_signal; + u32 deliver_restart_signal; + u32 deliver_program_int; + u32 exit_wait_state; + u32 instruction_stidp; + u32 instruction_spx; + u32 instruction_stpx; + u32 instruction_stap; + u32 instruction_storage_key; + u32 instruction_stsch; + u32 instruction_chsc; + u32 instruction_stsi; + u32 instruction_stfl; + u32 instruction_sigp_sense; + u32 instruction_sigp_emergency; + u32 instruction_sigp_stop; + u32 instruction_sigp_arch; + u32 instruction_sigp_prefix; + u32 instruction_sigp_restart; + u32 diagnose_44; +}; + +struct kvm_s390_io_info { + __u16 subchannel_id; /* 0x0b8 */ + __u16 subchannel_nr; /* 0x0ba */ + __u32 io_int_parm; /* 0x0bc */ + __u32 io_int_word; /* 0x0c0 */ +}; + +struct kvm_s390_ext_info { + __u32 ext_params; + __u64 ext_params2; +}; + +#define PGM_OPERATION 0x01 +#define PGM_PRIVILEGED_OPERATION 0x02 +#define PGM_EXECUTE 0x03 +#define PGM_PROTECTION 0x04 +#define PGM_ADDRESSING 0x05 +#define PGM_SPECIFICATION 0x06 +#define PGM_DATA 0x07 + +struct kvm_s390_pgm_info { + __u16 code; +}; + +struct kvm_s390_prefix_info { + __u32 address; +}; + +struct kvm_s390_interrupt_info { + struct list_head list; + u64 type; + union { + struct kvm_s390_io_info io; + struct kvm_s390_ext_info ext; + struct kvm_s390_pgm_info pgm; + struct kvm_s390_prefix_info prefix; + }; +}; + +/* for local_interrupt.action_flags */ +#define ACTION_STORE_ON_STOP 1 +#define ACTION_STOP_ON_STOP 2 + +struct kvm_s390_local_interrupt { + spinlock_t lock; + struct list_head list; + atomic_t active; + struct kvm_s390_float_interrupt *float_int; + int timer_due; /* event indicator for waitqueue below */ + wait_queue_head_t wq; + atomic_t *cpuflags; + unsigned int action_bits; +}; + +struct kvm_s390_float_interrupt { + spinlock_t lock; + struct list_head list; + atomic_t active; + int next_rr_cpu; + unsigned long idle_mask [(64 + sizeof(long) - 1) / sizeof(long)]; + struct kvm_s390_local_interrupt *local_int[64]; +}; + + +struct kvm_vcpu_arch { + struct kvm_s390_sie_block *sie_block; + unsigned long guest_gprs[16]; + s390_fp_regs host_fpregs; + unsigned int host_acrs[NUM_ACRS]; + s390_fp_regs guest_fpregs; + unsigned int guest_acrs[NUM_ACRS]; + struct kvm_s390_local_interrupt local_int; + struct timer_list ckc_timer; + union { + cpuid_t cpu_id; + u64 stidp_data; + }; +}; + +struct kvm_vm_stat { + u32 remote_tlb_flush; +}; + +struct kvm_arch{ + unsigned long guest_origin; + unsigned long guest_memsize; + struct sca_block *sca; + debug_info_t *dbf; + struct kvm_s390_float_interrupt float_int; +}; + +extern int sie64a(struct kvm_s390_sie_block *, unsigned long *); +#endif diff --git a/arch/s390/include/asm/kvm_para.h b/arch/s390/include/asm/kvm_para.h new file mode 100644 index 000000000000..2c503796b619 --- /dev/null +++ b/arch/s390/include/asm/kvm_para.h @@ -0,0 +1,150 @@ +/* + * asm-s390/kvm_para.h - definition for paravirtual devices on s390 + * + * Copyright IBM Corp. 2008 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (version 2 only) + * as published by the Free Software Foundation. + * + * Author(s): Christian Borntraeger + */ + +#ifndef __S390_KVM_PARA_H +#define __S390_KVM_PARA_H + +/* + * Hypercalls for KVM on s390. The calling convention is similar to the + * s390 ABI, so we use R2-R6 for parameters 1-5. In addition we use R1 + * as hypercall number and R7 as parameter 6. The return value is + * written to R2. We use the diagnose instruction as hypercall. To avoid + * conflicts with existing diagnoses for LPAR and z/VM, we do not use + * the instruction encoded number, but specify the number in R1 and + * use 0x500 as KVM hypercall + * + * Copyright IBM Corp. 2007,2008 + * Author(s): Christian Borntraeger + * + * This work is licensed under the terms of the GNU GPL, version 2. + */ + +static inline long kvm_hypercall0(unsigned long nr) +{ + register unsigned long __nr asm("1") = nr; + register long __rc asm("2"); + + asm volatile ("diag 2,4,0x500\n" + : "=d" (__rc) : "d" (__nr): "memory", "cc"); + return __rc; +} + +static inline long kvm_hypercall1(unsigned long nr, unsigned long p1) +{ + register unsigned long __nr asm("1") = nr; + register unsigned long __p1 asm("2") = p1; + register long __rc asm("2"); + + asm volatile ("diag 2,4,0x500\n" + : "=d" (__rc) : "d" (__nr), "0" (__p1) : "memory", "cc"); + return __rc; +} + +static inline long kvm_hypercall2(unsigned long nr, unsigned long p1, + unsigned long p2) +{ + register unsigned long __nr asm("1") = nr; + register unsigned long __p1 asm("2") = p1; + register unsigned long __p2 asm("3") = p2; + register long __rc asm("2"); + + asm volatile ("diag 2,4,0x500\n" + : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2) + : "memory", "cc"); + return __rc; +} + +static inline long kvm_hypercall3(unsigned long nr, unsigned long p1, + unsigned long p2, unsigned long p3) +{ + register unsigned long __nr asm("1") = nr; + register unsigned long __p1 asm("2") = p1; + register unsigned long __p2 asm("3") = p2; + register unsigned long __p3 asm("4") = p3; + register long __rc asm("2"); + + asm volatile ("diag 2,4,0x500\n" + : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2), + "d" (__p3) : "memory", "cc"); + return __rc; +} + + +static inline long kvm_hypercall4(unsigned long nr, unsigned long p1, + unsigned long p2, unsigned long p3, + unsigned long p4) +{ + register unsigned long __nr asm("1") = nr; + register unsigned long __p1 asm("2") = p1; + register unsigned long __p2 asm("3") = p2; + register unsigned long __p3 asm("4") = p3; + register unsigned long __p4 asm("5") = p4; + register long __rc asm("2"); + + asm volatile ("diag 2,4,0x500\n" + : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2), + "d" (__p3), "d" (__p4) : "memory", "cc"); + return __rc; +} + +static inline long kvm_hypercall5(unsigned long nr, unsigned long p1, + unsigned long p2, unsigned long p3, + unsigned long p4, unsigned long p5) +{ + register unsigned long __nr asm("1") = nr; + register unsigned long __p1 asm("2") = p1; + register unsigned long __p2 asm("3") = p2; + register unsigned long __p3 asm("4") = p3; + register unsigned long __p4 asm("5") = p4; + register unsigned long __p5 asm("6") = p5; + register long __rc asm("2"); + + asm volatile ("diag 2,4,0x500\n" + : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2), + "d" (__p3), "d" (__p4), "d" (__p5) : "memory", "cc"); + return __rc; +} + +static inline long kvm_hypercall6(unsigned long nr, unsigned long p1, + unsigned long p2, unsigned long p3, + unsigned long p4, unsigned long p5, + unsigned long p6) +{ + register unsigned long __nr asm("1") = nr; + register unsigned long __p1 asm("2") = p1; + register unsigned long __p2 asm("3") = p2; + register unsigned long __p3 asm("4") = p3; + register unsigned long __p4 asm("5") = p4; + register unsigned long __p5 asm("6") = p5; + register unsigned long __p6 asm("7") = p6; + register long __rc asm("2"); + + asm volatile ("diag 2,4,0x500\n" + : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2), + "d" (__p3), "d" (__p4), "d" (__p5), "d" (__p6) + : "memory", "cc"); + return __rc; +} + +/* kvm on s390 is always paravirtualization enabled */ +static inline int kvm_para_available(void) +{ + return 1; +} + +/* No feature bits are currently assigned for kvm on s390 */ +static inline unsigned int kvm_arch_para_features(void) +{ + return 0; +} + +#endif /* __S390_KVM_PARA_H */ diff --git a/arch/s390/include/asm/kvm_virtio.h b/arch/s390/include/asm/kvm_virtio.h new file mode 100644 index 000000000000..146100224def --- /dev/null +++ b/arch/s390/include/asm/kvm_virtio.h @@ -0,0 +1,63 @@ +/* + * kvm_virtio.h - definition for virtio for kvm on s390 + * + * Copyright IBM Corp. 2008 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (version 2 only) + * as published by the Free Software Foundation. + * + * Author(s): Christian Borntraeger + */ + +#ifndef __KVM_S390_VIRTIO_H +#define __KVM_S390_VIRTIO_H + +#include + +struct kvm_device_desc { + /* The device type: console, network, disk etc. Type 0 terminates. */ + __u8 type; + /* The number of virtqueues (first in config array) */ + __u8 num_vq; + /* + * The number of bytes of feature bits. Multiply by 2: one for host + * features and one for guest acknowledgements. + */ + __u8 feature_len; + /* The number of bytes of the config array after virtqueues. */ + __u8 config_len; + /* A status byte, written by the Guest. */ + __u8 status; + __u8 config[0]; +}; + +/* + * This is how we expect the device configuration field for a virtqueue + * to be laid out in config space. + */ +struct kvm_vqconfig { + /* The token returned with an interrupt. Set by the guest */ + __u64 token; + /* The address of the virtio ring */ + __u64 address; + /* The number of entries in the virtio_ring */ + __u16 num; + +}; + +#define KVM_S390_VIRTIO_NOTIFY 0 +#define KVM_S390_VIRTIO_RESET 1 +#define KVM_S390_VIRTIO_SET_STATUS 2 + +#ifdef __KERNEL__ +/* early virtio console setup */ +#ifdef CONFIG_VIRTIO_CONSOLE +extern void s390_virtio_console_init(void); +#else +static inline void s390_virtio_console_init(void) +{ +} +#endif /* CONFIG_VIRTIO_CONSOLE */ +#endif /* __KERNEL__ */ +#endif diff --git a/arch/s390/include/asm/linkage.h b/arch/s390/include/asm/linkage.h new file mode 100644 index 000000000000..291c2d01c44f --- /dev/null +++ b/arch/s390/include/asm/linkage.h @@ -0,0 +1,6 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +/* Nothing to see here... */ + +#endif diff --git a/arch/s390/include/asm/local.h b/arch/s390/include/asm/local.h new file mode 100644 index 000000000000..c11c530f74d0 --- /dev/null +++ b/arch/s390/include/asm/local.h @@ -0,0 +1 @@ +#include diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h new file mode 100644 index 000000000000..0bc51d52a899 --- /dev/null +++ b/arch/s390/include/asm/lowcore.h @@ -0,0 +1,433 @@ +/* + * include/asm-s390/lowcore.h + * + * S390 version + * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Hartmut Penner (hp@de.ibm.com), + * Martin Schwidefsky (schwidefsky@de.ibm.com), + * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) + */ + +#ifndef _ASM_S390_LOWCORE_H +#define _ASM_S390_LOWCORE_H + +#ifndef __s390x__ +#define __LC_EXT_OLD_PSW 0x018 +#define __LC_SVC_OLD_PSW 0x020 +#define __LC_PGM_OLD_PSW 0x028 +#define __LC_MCK_OLD_PSW 0x030 +#define __LC_IO_OLD_PSW 0x038 +#define __LC_EXT_NEW_PSW 0x058 +#define __LC_SVC_NEW_PSW 0x060 +#define __LC_PGM_NEW_PSW 0x068 +#define __LC_MCK_NEW_PSW 0x070 +#define __LC_IO_NEW_PSW 0x078 +#else /* !__s390x__ */ +#define __LC_EXT_OLD_PSW 0x0130 +#define __LC_SVC_OLD_PSW 0x0140 +#define __LC_PGM_OLD_PSW 0x0150 +#define __LC_MCK_OLD_PSW 0x0160 +#define __LC_IO_OLD_PSW 0x0170 +#define __LC_EXT_NEW_PSW 0x01b0 +#define __LC_SVC_NEW_PSW 0x01c0 +#define __LC_PGM_NEW_PSW 0x01d0 +#define __LC_MCK_NEW_PSW 0x01e0 +#define __LC_IO_NEW_PSW 0x01f0 +#endif /* !__s390x__ */ + +#define __LC_IPL_PARMBLOCK_PTR 0x014 +#define __LC_EXT_PARAMS 0x080 +#define __LC_CPU_ADDRESS 0x084 +#define __LC_EXT_INT_CODE 0x086 + +#define __LC_SVC_ILC 0x088 +#define __LC_SVC_INT_CODE 0x08A +#define __LC_PGM_ILC 0x08C +#define __LC_PGM_INT_CODE 0x08E + +#define __LC_PER_ATMID 0x096 +#define __LC_PER_ADDRESS 0x098 +#define __LC_PER_ACCESS_ID 0x0A1 +#define __LC_AR_MODE_ID 0x0A3 + +#define __LC_SUBCHANNEL_ID 0x0B8 +#define __LC_SUBCHANNEL_NR 0x0BA +#define __LC_IO_INT_PARM 0x0BC +#define __LC_IO_INT_WORD 0x0C0 +#define __LC_MCCK_CODE 0x0E8 + +#define __LC_LAST_BREAK 0x110 + +#define __LC_RETURN_PSW 0x200 + +#define __LC_SAVE_AREA 0xC00 + +#ifndef __s390x__ +#define __LC_IRB 0x208 +#define __LC_SYNC_ENTER_TIMER 0x248 +#define __LC_ASYNC_ENTER_TIMER 0x250 +#define __LC_EXIT_TIMER 0x258 +#define __LC_LAST_UPDATE_TIMER 0x260 +#define __LC_USER_TIMER 0x268 +#define __LC_SYSTEM_TIMER 0x270 +#define __LC_LAST_UPDATE_CLOCK 0x278 +#define __LC_STEAL_CLOCK 0x280 +#define __LC_RETURN_MCCK_PSW 0x288 +#define __LC_KERNEL_STACK 0xC40 +#define __LC_THREAD_INFO 0xC44 +#define __LC_ASYNC_STACK 0xC48 +#define __LC_KERNEL_ASCE 0xC4C +#define __LC_USER_ASCE 0xC50 +#define __LC_PANIC_STACK 0xC54 +#define __LC_CPUID 0xC60 +#define __LC_CPUADDR 0xC68 +#define __LC_IPLDEV 0xC7C +#define __LC_CURRENT 0xC90 +#define __LC_INT_CLOCK 0xC98 +#else /* __s390x__ */ +#define __LC_IRB 0x210 +#define __LC_SYNC_ENTER_TIMER 0x250 +#define __LC_ASYNC_ENTER_TIMER 0x258 +#define __LC_EXIT_TIMER 0x260 +#define __LC_LAST_UPDATE_TIMER 0x268 +#define __LC_USER_TIMER 0x270 +#define __LC_SYSTEM_TIMER 0x278 +#define __LC_LAST_UPDATE_CLOCK 0x280 +#define __LC_STEAL_CLOCK 0x288 +#define __LC_RETURN_MCCK_PSW 0x290 +#define __LC_KERNEL_STACK 0xD40 +#define __LC_THREAD_INFO 0xD48 +#define __LC_ASYNC_STACK 0xD50 +#define __LC_KERNEL_ASCE 0xD58 +#define __LC_USER_ASCE 0xD60 +#define __LC_PANIC_STACK 0xD68 +#define __LC_CPUID 0xD80 +#define __LC_CPUADDR 0xD88 +#define __LC_IPLDEV 0xDB8 +#define __LC_CURRENT 0xDD8 +#define __LC_INT_CLOCK 0xDE8 +#endif /* __s390x__ */ + + +#define __LC_PANIC_MAGIC 0xE00 +#ifndef __s390x__ +#define __LC_PFAULT_INTPARM 0x080 +#define __LC_CPU_TIMER_SAVE_AREA 0x0D8 +#define __LC_CLOCK_COMP_SAVE_AREA 0x0E0 +#define __LC_PSW_SAVE_AREA 0x100 +#define __LC_PREFIX_SAVE_AREA 0x108 +#define __LC_AREGS_SAVE_AREA 0x120 +#define __LC_FPREGS_SAVE_AREA 0x160 +#define __LC_GPREGS_SAVE_AREA 0x180 +#define __LC_CREGS_SAVE_AREA 0x1C0 +#else /* __s390x__ */ +#define __LC_PFAULT_INTPARM 0x11B8 +#define __LC_FPREGS_SAVE_AREA 0x1200 +#define __LC_GPREGS_SAVE_AREA 0x1280 +#define __LC_PSW_SAVE_AREA 0x1300 +#define __LC_PREFIX_SAVE_AREA 0x1318 +#define __LC_FP_CREG_SAVE_AREA 0x131C +#define __LC_TODREG_SAVE_AREA 0x1324 +#define __LC_CPU_TIMER_SAVE_AREA 0x1328 +#define __LC_CLOCK_COMP_SAVE_AREA 0x1331 +#define __LC_AREGS_SAVE_AREA 0x1340 +#define __LC_CREGS_SAVE_AREA 0x1380 +#endif /* __s390x__ */ + +#ifndef __ASSEMBLY__ + +#include +#include +#include + +void restart_int_handler(void); +void ext_int_handler(void); +void system_call(void); +void pgm_check_handler(void); +void mcck_int_handler(void); +void io_int_handler(void); + +struct save_area_s390 { + u32 ext_save; + u64 timer; + u64 clk_cmp; + u8 pad1[24]; + u8 psw[8]; + u32 pref_reg; + u8 pad2[20]; + u32 acc_regs[16]; + u64 fp_regs[4]; + u32 gp_regs[16]; + u32 ctrl_regs[16]; +} __attribute__((packed)); + +struct save_area_s390x { + u64 fp_regs[16]; + u64 gp_regs[16]; + u8 psw[16]; + u8 pad1[8]; + u32 pref_reg; + u32 fp_ctrl_reg; + u8 pad2[4]; + u32 tod_reg; + u64 timer; + u64 clk_cmp; + u8 pad3[8]; + u32 acc_regs[16]; + u64 ctrl_regs[16]; +} __attribute__((packed)); + +union save_area { + struct save_area_s390 s390; + struct save_area_s390x s390x; +}; + +#define SAVE_AREA_BASE_S390 0xd4 +#define SAVE_AREA_BASE_S390X 0x1200 + +#ifndef __s390x__ +#define SAVE_AREA_SIZE sizeof(struct save_area_s390) +#define SAVE_AREA_BASE SAVE_AREA_BASE_S390 +#else +#define SAVE_AREA_SIZE sizeof(struct save_area_s390x) +#define SAVE_AREA_BASE SAVE_AREA_BASE_S390X +#endif + +struct _lowcore +{ +#ifndef __s390x__ + /* prefix area: defined by architecture */ + psw_t restart_psw; /* 0x000 */ + __u32 ccw2[4]; /* 0x008 */ + psw_t external_old_psw; /* 0x018 */ + psw_t svc_old_psw; /* 0x020 */ + psw_t program_old_psw; /* 0x028 */ + psw_t mcck_old_psw; /* 0x030 */ + psw_t io_old_psw; /* 0x038 */ + __u8 pad1[0x58-0x40]; /* 0x040 */ + psw_t external_new_psw; /* 0x058 */ + psw_t svc_new_psw; /* 0x060 */ + psw_t program_new_psw; /* 0x068 */ + psw_t mcck_new_psw; /* 0x070 */ + psw_t io_new_psw; /* 0x078 */ + __u32 ext_params; /* 0x080 */ + __u16 cpu_addr; /* 0x084 */ + __u16 ext_int_code; /* 0x086 */ + __u16 svc_ilc; /* 0x088 */ + __u16 svc_code; /* 0x08a */ + __u16 pgm_ilc; /* 0x08c */ + __u16 pgm_code; /* 0x08e */ + __u32 trans_exc_code; /* 0x090 */ + __u16 mon_class_num; /* 0x094 */ + __u16 per_perc_atmid; /* 0x096 */ + __u32 per_address; /* 0x098 */ + __u32 monitor_code; /* 0x09c */ + __u8 exc_access_id; /* 0x0a0 */ + __u8 per_access_id; /* 0x0a1 */ + __u8 pad2[0xB8-0xA2]; /* 0x0a2 */ + __u16 subchannel_id; /* 0x0b8 */ + __u16 subchannel_nr; /* 0x0ba */ + __u32 io_int_parm; /* 0x0bc */ + __u32 io_int_word; /* 0x0c0 */ + __u8 pad3[0xc8-0xc4]; /* 0x0c4 */ + __u32 stfl_fac_list; /* 0x0c8 */ + __u8 pad4[0xd4-0xcc]; /* 0x0cc */ + __u32 extended_save_area_addr; /* 0x0d4 */ + __u32 cpu_timer_save_area[2]; /* 0x0d8 */ + __u32 clock_comp_save_area[2]; /* 0x0e0 */ + __u32 mcck_interruption_code[2]; /* 0x0e8 */ + __u8 pad5[0xf4-0xf0]; /* 0x0f0 */ + __u32 external_damage_code; /* 0x0f4 */ + __u32 failing_storage_address; /* 0x0f8 */ + __u8 pad6[0x100-0xfc]; /* 0x0fc */ + __u32 st_status_fixed_logout[4];/* 0x100 */ + __u8 pad7[0x120-0x110]; /* 0x110 */ + __u32 access_regs_save_area[16];/* 0x120 */ + __u32 floating_pt_save_area[8]; /* 0x160 */ + __u32 gpregs_save_area[16]; /* 0x180 */ + __u32 cregs_save_area[16]; /* 0x1c0 */ + + psw_t return_psw; /* 0x200 */ + __u8 irb[64]; /* 0x208 */ + __u64 sync_enter_timer; /* 0x248 */ + __u64 async_enter_timer; /* 0x250 */ + __u64 exit_timer; /* 0x258 */ + __u64 last_update_timer; /* 0x260 */ + __u64 user_timer; /* 0x268 */ + __u64 system_timer; /* 0x270 */ + __u64 last_update_clock; /* 0x278 */ + __u64 steal_clock; /* 0x280 */ + psw_t return_mcck_psw; /* 0x288 */ + __u8 pad8[0xc00-0x290]; /* 0x290 */ + + /* System info area */ + __u32 save_area[16]; /* 0xc00 */ + __u32 kernel_stack; /* 0xc40 */ + __u32 thread_info; /* 0xc44 */ + __u32 async_stack; /* 0xc48 */ + __u32 kernel_asce; /* 0xc4c */ + __u32 user_asce; /* 0xc50 */ + __u32 panic_stack; /* 0xc54 */ + __u32 user_exec_asce; /* 0xc58 */ + __u8 pad10[0xc60-0xc5c]; /* 0xc5c */ + /* entry.S sensitive area start */ + struct cpuinfo_S390 cpu_data; /* 0xc60 */ + __u32 ipl_device; /* 0xc7c */ + /* entry.S sensitive area end */ + + /* SMP info area: defined by DJB */ + __u64 clock_comparator; /* 0xc80 */ + __u32 ext_call_fast; /* 0xc88 */ + __u32 percpu_offset; /* 0xc8c */ + __u32 current_task; /* 0xc90 */ + __u32 softirq_pending; /* 0xc94 */ + __u64 int_clock; /* 0xc98 */ + __u8 pad11[0xe00-0xca0]; /* 0xca0 */ + + /* 0xe00 is used as indicator for dump tools */ + /* whether the kernel died with panic() or not */ + __u32 panic_magic; /* 0xe00 */ + + /* Align to the top 1k of prefix area */ + __u8 pad12[0x1000-0xe04]; /* 0xe04 */ +#else /* !__s390x__ */ + /* prefix area: defined by architecture */ + __u32 ccw1[2]; /* 0x000 */ + __u32 ccw2[4]; /* 0x008 */ + __u8 pad1[0x80-0x18]; /* 0x018 */ + __u32 ext_params; /* 0x080 */ + __u16 cpu_addr; /* 0x084 */ + __u16 ext_int_code; /* 0x086 */ + __u16 svc_ilc; /* 0x088 */ + __u16 svc_code; /* 0x08a */ + __u16 pgm_ilc; /* 0x08c */ + __u16 pgm_code; /* 0x08e */ + __u32 data_exc_code; /* 0x090 */ + __u16 mon_class_num; /* 0x094 */ + __u16 per_perc_atmid; /* 0x096 */ + addr_t per_address; /* 0x098 */ + __u8 exc_access_id; /* 0x0a0 */ + __u8 per_access_id; /* 0x0a1 */ + __u8 op_access_id; /* 0x0a2 */ + __u8 ar_access_id; /* 0x0a3 */ + __u8 pad2[0xA8-0xA4]; /* 0x0a4 */ + addr_t trans_exc_code; /* 0x0A0 */ + addr_t monitor_code; /* 0x09c */ + __u16 subchannel_id; /* 0x0b8 */ + __u16 subchannel_nr; /* 0x0ba */ + __u32 io_int_parm; /* 0x0bc */ + __u32 io_int_word; /* 0x0c0 */ + __u8 pad3[0xc8-0xc4]; /* 0x0c4 */ + __u32 stfl_fac_list; /* 0x0c8 */ + __u8 pad4[0xe8-0xcc]; /* 0x0cc */ + __u32 mcck_interruption_code[2]; /* 0x0e8 */ + __u8 pad5[0xf4-0xf0]; /* 0x0f0 */ + __u32 external_damage_code; /* 0x0f4 */ + addr_t failing_storage_address; /* 0x0f8 */ + __u8 pad6[0x120-0x100]; /* 0x100 */ + psw_t restart_old_psw; /* 0x120 */ + psw_t external_old_psw; /* 0x130 */ + psw_t svc_old_psw; /* 0x140 */ + psw_t program_old_psw; /* 0x150 */ + psw_t mcck_old_psw; /* 0x160 */ + psw_t io_old_psw; /* 0x170 */ + __u8 pad7[0x1a0-0x180]; /* 0x180 */ + psw_t restart_psw; /* 0x1a0 */ + psw_t external_new_psw; /* 0x1b0 */ + psw_t svc_new_psw; /* 0x1c0 */ + psw_t program_new_psw; /* 0x1d0 */ + psw_t mcck_new_psw; /* 0x1e0 */ + psw_t io_new_psw; /* 0x1f0 */ + psw_t return_psw; /* 0x200 */ + __u8 irb[64]; /* 0x210 */ + __u64 sync_enter_timer; /* 0x250 */ + __u64 async_enter_timer; /* 0x258 */ + __u64 exit_timer; /* 0x260 */ + __u64 last_update_timer; /* 0x268 */ + __u64 user_timer; /* 0x270 */ + __u64 system_timer; /* 0x278 */ + __u64 last_update_clock; /* 0x280 */ + __u64 steal_clock; /* 0x288 */ + psw_t return_mcck_psw; /* 0x290 */ + __u8 pad8[0xc00-0x2a0]; /* 0x2a0 */ + /* System info area */ + __u64 save_area[16]; /* 0xc00 */ + __u8 pad9[0xd40-0xc80]; /* 0xc80 */ + __u64 kernel_stack; /* 0xd40 */ + __u64 thread_info; /* 0xd48 */ + __u64 async_stack; /* 0xd50 */ + __u64 kernel_asce; /* 0xd58 */ + __u64 user_asce; /* 0xd60 */ + __u64 panic_stack; /* 0xd68 */ + __u64 user_exec_asce; /* 0xd70 */ + __u8 pad10[0xd80-0xd78]; /* 0xd78 */ + /* entry.S sensitive area start */ + struct cpuinfo_S390 cpu_data; /* 0xd80 */ + __u32 ipl_device; /* 0xdb8 */ + __u32 pad11; /* 0xdbc */ + /* entry.S sensitive area end */ + + /* SMP info area: defined by DJB */ + __u64 clock_comparator; /* 0xdc0 */ + __u64 ext_call_fast; /* 0xdc8 */ + __u64 percpu_offset; /* 0xdd0 */ + __u64 current_task; /* 0xdd8 */ + __u32 softirq_pending; /* 0xde0 */ + __u32 pad_0x0de4; /* 0xde4 */ + __u64 int_clock; /* 0xde8 */ + __u8 pad12[0xe00-0xdf0]; /* 0xdf0 */ + + /* 0xe00 is used as indicator for dump tools */ + /* whether the kernel died with panic() or not */ + __u32 panic_magic; /* 0xe00 */ + + __u8 pad13[0x11b8-0xe04]; /* 0xe04 */ + + /* 64 bit extparam used for pfault, diag 250 etc */ + __u64 ext_params2; /* 0x11B8 */ + + __u8 pad14[0x1200-0x11C0]; /* 0x11C0 */ + + /* System info area */ + + __u64 floating_pt_save_area[16]; /* 0x1200 */ + __u64 gpregs_save_area[16]; /* 0x1280 */ + __u32 st_status_fixed_logout[4]; /* 0x1300 */ + __u8 pad15[0x1318-0x1310]; /* 0x1310 */ + __u32 prefixreg_save_area; /* 0x1318 */ + __u32 fpt_creg_save_area; /* 0x131c */ + __u8 pad16[0x1324-0x1320]; /* 0x1320 */ + __u32 tod_progreg_save_area; /* 0x1324 */ + __u32 cpu_timer_save_area[2]; /* 0x1328 */ + __u32 clock_comp_save_area[2]; /* 0x1330 */ + __u8 pad17[0x1340-0x1338]; /* 0x1338 */ + __u32 access_regs_save_area[16]; /* 0x1340 */ + __u64 cregs_save_area[16]; /* 0x1380 */ + + /* align to the top of the prefix area */ + + __u8 pad18[0x2000-0x1400]; /* 0x1400 */ +#endif /* !__s390x__ */ +} __attribute__((packed)); /* End structure*/ + +#define S390_lowcore (*((struct _lowcore *) 0)) +extern struct _lowcore *lowcore_ptr[]; + +static inline void set_prefix(__u32 address) +{ + asm volatile("spx %0" : : "m" (address) : "memory"); +} + +static inline __u32 store_prefix(void) +{ + __u32 address; + + asm volatile("stpx %0" : "=m" (address)); + return address; +} + +#define __PANIC_MAGIC 0xDEADC0DE + +#endif + +#endif diff --git a/arch/s390/include/asm/mathemu.h b/arch/s390/include/asm/mathemu.h new file mode 100644 index 000000000000..e8dd1ba8edb0 --- /dev/null +++ b/arch/s390/include/asm/mathemu.h @@ -0,0 +1,29 @@ +/* + * arch/s390/kernel/mathemu.h + * IEEE floating point emulation. + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) + */ + +#ifndef __MATHEMU__ +#define __MATHEMU__ + +extern int math_emu_b3(__u8 *, struct pt_regs *); +extern int math_emu_ed(__u8 *, struct pt_regs *); +extern int math_emu_ldr(__u8 *); +extern int math_emu_ler(__u8 *); +extern int math_emu_std(__u8 *, struct pt_regs *); +extern int math_emu_ld(__u8 *, struct pt_regs *); +extern int math_emu_ste(__u8 *, struct pt_regs *); +extern int math_emu_le(__u8 *, struct pt_regs *); +extern int math_emu_lfpc(__u8 *, struct pt_regs *); +extern int math_emu_stfpc(__u8 *, struct pt_regs *); +extern int math_emu_srnm(__u8 *, struct pt_regs *); + +#endif /* __MATHEMU__ */ + + + + diff --git a/arch/s390/include/asm/mman.h b/arch/s390/include/asm/mman.h new file mode 100644 index 000000000000..7839767d837e --- /dev/null +++ b/arch/s390/include/asm/mman.h @@ -0,0 +1,25 @@ +/* + * include/asm-s390/mman.h + * + * S390 version + * + * Derived from "include/asm-i386/mman.h" + */ + +#ifndef __S390_MMAN_H__ +#define __S390_MMAN_H__ + +#include + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* __S390_MMAN_H__ */ diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h new file mode 100644 index 000000000000..5dd5e7b3476f --- /dev/null +++ b/arch/s390/include/asm/mmu.h @@ -0,0 +1,13 @@ +#ifndef __MMU_H +#define __MMU_H + +typedef struct { + struct list_head crst_list; + struct list_head pgtable_list; + unsigned long asce_bits; + unsigned long asce_limit; + int noexec; + int pgstes; +} mm_context_t; + +#endif diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h new file mode 100644 index 000000000000..4c2fbf48c9c4 --- /dev/null +++ b/arch/s390/include/asm/mmu_context.h @@ -0,0 +1,77 @@ +/* + * include/asm-s390/mmu_context.h + * + * S390 version + * + * Derived from "include/asm-i386/mmu_context.h" + */ + +#ifndef __S390_MMU_CONTEXT_H +#define __S390_MMU_CONTEXT_H + +#include +#include +#include + +static inline int init_new_context(struct task_struct *tsk, + struct mm_struct *mm) +{ + mm->context.asce_bits = _ASCE_TABLE_LENGTH | _ASCE_USER_BITS; +#ifdef CONFIG_64BIT + mm->context.asce_bits |= _ASCE_TYPE_REGION3; +#endif + if (current->mm->context.pgstes) { + mm->context.noexec = 0; + mm->context.pgstes = 1; + } else { + mm->context.noexec = s390_noexec; + mm->context.pgstes = 0; + } + mm->context.asce_limit = STACK_TOP_MAX; + crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm)); + return 0; +} + +#define destroy_context(mm) do { } while (0) + +#ifndef __s390x__ +#define LCTL_OPCODE "lctl" +#else +#define LCTL_OPCODE "lctlg" +#endif + +static inline void update_mm(struct mm_struct *mm, struct task_struct *tsk) +{ + pgd_t *pgd = mm->pgd; + + S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd); + if (switch_amode) { + /* Load primary space page table origin. */ + pgd = mm->context.noexec ? get_shadow_table(pgd) : pgd; + S390_lowcore.user_exec_asce = mm->context.asce_bits | __pa(pgd); + asm volatile(LCTL_OPCODE" 1,1,%0\n" + : : "m" (S390_lowcore.user_exec_asce) ); + } else + /* Load home space page table origin. */ + asm volatile(LCTL_OPCODE" 13,13,%0" + : : "m" (S390_lowcore.user_asce) ); + set_fs(current->thread.mm_segment); +} + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + cpu_set(smp_processor_id(), next->cpu_vm_mask); + update_mm(next, tsk); +} + +#define enter_lazy_tlb(mm,tsk) do { } while (0) +#define deactivate_mm(tsk,mm) do { } while (0) + +static inline void activate_mm(struct mm_struct *prev, + struct mm_struct *next) +{ + switch_mm(prev, next, current); +} + +#endif /* __S390_MMU_CONTEXT_H */ diff --git a/arch/s390/include/asm/module.h b/arch/s390/include/asm/module.h new file mode 100644 index 000000000000..1cc1c5af705a --- /dev/null +++ b/arch/s390/include/asm/module.h @@ -0,0 +1,46 @@ +#ifndef _ASM_S390_MODULE_H +#define _ASM_S390_MODULE_H +/* + * This file contains the s390 architecture specific module code. + */ + +struct mod_arch_syminfo +{ + unsigned long got_offset; + unsigned long plt_offset; + int got_initialized; + int plt_initialized; +}; + +struct mod_arch_specific +{ + /* Starting offset of got in the module core memory. */ + unsigned long got_offset; + /* Starting offset of plt in the module core memory. */ + unsigned long plt_offset; + /* Size of the got. */ + unsigned long got_size; + /* Size of the plt. */ + unsigned long plt_size; + /* Number of symbols in syminfo. */ + int nsyms; + /* Additional symbol information (got and plt offsets). */ + struct mod_arch_syminfo *syminfo; +}; + +#ifdef __s390x__ +#define ElfW(x) Elf64_ ## x +#define ELFW(x) ELF64_ ## x +#else +#define ElfW(x) Elf32_ ## x +#define ELFW(x) ELF32_ ## x +#endif + +#define Elf_Addr ElfW(Addr) +#define Elf_Rela ElfW(Rela) +#define Elf_Shdr ElfW(Shdr) +#define Elf_Sym ElfW(Sym) +#define Elf_Ehdr ElfW(Ehdr) +#define ELF_R_SYM ELFW(R_SYM) +#define ELF_R_TYPE ELFW(R_TYPE) +#endif /* _ASM_S390_MODULE_H */ diff --git a/arch/s390/include/asm/monwriter.h b/arch/s390/include/asm/monwriter.h new file mode 100644 index 000000000000..f0cbf96c52e6 --- /dev/null +++ b/arch/s390/include/asm/monwriter.h @@ -0,0 +1,33 @@ +/* + * include/asm-s390/monwriter.h + * + * Copyright (C) IBM Corp. 2006 + * Character device driver for writing z/VM APPLDATA monitor records + * Version 1.0 + * Author(s): Melissa Howland + * + */ + +#ifndef _ASM_390_MONWRITER_H +#define _ASM_390_MONWRITER_H + +/* mon_function values */ +#define MONWRITE_START_INTERVAL 0x00 /* start interval recording */ +#define MONWRITE_STOP_INTERVAL 0x01 /* stop interval or config recording */ +#define MONWRITE_GEN_EVENT 0x02 /* generate event record */ +#define MONWRITE_START_CONFIG 0x03 /* start configuration recording */ + +/* the header the app uses in its write() data */ +struct monwrite_hdr { + unsigned char mon_function; + unsigned short applid; + unsigned char record_num; + unsigned short version; + unsigned short release; + unsigned short mod_level; + unsigned short datalen; + unsigned char hdrlen; + +} __attribute__((packed)); + +#endif /* _ASM_390_MONWRITER_H */ diff --git a/arch/s390/include/asm/msgbuf.h b/arch/s390/include/asm/msgbuf.h new file mode 100644 index 000000000000..1bbdee927924 --- /dev/null +++ b/arch/s390/include/asm/msgbuf.h @@ -0,0 +1,37 @@ +#ifndef _S390_MSGBUF_H +#define _S390_MSGBUF_H + +/* + * The msqid64_ds structure for S/390 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ +#ifndef __s390x__ + unsigned long __unused1; +#endif /* ! __s390x__ */ + __kernel_time_t msg_rtime; /* last msgrcv time */ +#ifndef __s390x__ + unsigned long __unused2; +#endif /* ! __s390x__ */ + __kernel_time_t msg_ctime; /* last change time */ +#ifndef __s390x__ + unsigned long __unused3; +#endif /* ! __s390x__ */ + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _S390_MSGBUF_H */ diff --git a/arch/s390/include/asm/mutex.h b/arch/s390/include/asm/mutex.h new file mode 100644 index 000000000000..458c1f7fbc18 --- /dev/null +++ b/arch/s390/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h new file mode 100644 index 000000000000..991ba939408c --- /dev/null +++ b/arch/s390/include/asm/page.h @@ -0,0 +1,155 @@ +/* + * include/asm-s390/page.h + * + * S390 version + * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Hartmut Penner (hp@de.ibm.com) + */ + +#ifndef _S390_PAGE_H +#define _S390_PAGE_H + +#include +#include + +/* PAGE_SHIFT determines the page size */ +#define PAGE_SHIFT 12 +#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) +#define PAGE_DEFAULT_ACC 0 +#define PAGE_DEFAULT_KEY (PAGE_DEFAULT_ACC << 4) + +#define HPAGE_SHIFT 20 +#define HPAGE_SIZE (1UL << HPAGE_SHIFT) +#define HPAGE_MASK (~(HPAGE_SIZE - 1)) +#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) + +#define ARCH_HAS_SETCLEAR_HUGE_PTE +#define ARCH_HAS_HUGE_PTE_TYPE +#define ARCH_HAS_PREPARE_HUGEPAGE +#define ARCH_HAS_HUGEPAGE_CLEAR_FLUSH + +#include +#ifndef __ASSEMBLY__ + +static inline void clear_page(void *page) +{ + if (MACHINE_HAS_PFMF) { + asm volatile( + " .insn rre,0xb9af0000,%0,%1" + : : "d" (0x10000), "a" (page) : "memory", "cc"); + } else { + register unsigned long reg1 asm ("1") = 0; + register void *reg2 asm ("2") = page; + register unsigned long reg3 asm ("3") = 4096; + asm volatile( + " mvcl 2,0" + : "+d" (reg2), "+d" (reg3) : "d" (reg1) + : "memory", "cc"); + } +} + +static inline void copy_page(void *to, void *from) +{ + if (MACHINE_HAS_MVPG) { + register unsigned long reg0 asm ("0") = 0; + asm volatile( + " mvpg %0,%1" + : : "a" (to), "a" (from), "d" (reg0) + : "memory", "cc"); + } else + asm volatile( + " mvc 0(256,%0),0(%1)\n" + " mvc 256(256,%0),256(%1)\n" + " mvc 512(256,%0),512(%1)\n" + " mvc 768(256,%0),768(%1)\n" + " mvc 1024(256,%0),1024(%1)\n" + " mvc 1280(256,%0),1280(%1)\n" + " mvc 1536(256,%0),1536(%1)\n" + " mvc 1792(256,%0),1792(%1)\n" + " mvc 2048(256,%0),2048(%1)\n" + " mvc 2304(256,%0),2304(%1)\n" + " mvc 2560(256,%0),2560(%1)\n" + " mvc 2816(256,%0),2816(%1)\n" + " mvc 3072(256,%0),3072(%1)\n" + " mvc 3328(256,%0),3328(%1)\n" + " mvc 3584(256,%0),3584(%1)\n" + " mvc 3840(256,%0),3840(%1)\n" + : : "a" (to), "a" (from) : "memory"); +} + +#define clear_user_page(page, vaddr, pg) clear_page(page) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) + +#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ + alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) +#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE + +/* + * These are used to make use of C type-checking.. + */ + +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pmd; } pmd_t; +typedef struct { unsigned long pud; } pud_t; +typedef struct { unsigned long pgd; } pgd_t; +typedef pte_t *pgtable_t; + +#define pgprot_val(x) ((x).pgprot) +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((x).pmd) +#define pud_val(x) ((x).pud) +#define pgd_val(x) ((x).pgd) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +/* default storage key used for all pages */ +extern unsigned int default_storage_key; + +static inline void +page_set_storage_key(unsigned long addr, unsigned int skey) +{ + asm volatile("sske %0,%1" : : "d" (skey), "a" (addr)); +} + +static inline unsigned int +page_get_storage_key(unsigned long addr) +{ + unsigned int skey; + + asm volatile("iske %0,%1" : "=d" (skey) : "a" (addr), "0" (0)); + return skey; +} + +#ifdef CONFIG_PAGE_STATES + +struct page; +void arch_free_page(struct page *page, int order); +void arch_alloc_page(struct page *page, int order); + +#define HAVE_ARCH_FREE_PAGE +#define HAVE_ARCH_ALLOC_PAGE + +#endif + +#endif /* !__ASSEMBLY__ */ + +#define __PAGE_OFFSET 0x0UL +#define PAGE_OFFSET 0x0UL +#define __pa(x) (unsigned long)(x) +#define __va(x) (void *)(unsigned long)(x) +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#include +#include + +#endif /* _S390_PAGE_H */ diff --git a/arch/s390/include/asm/param.h b/arch/s390/include/asm/param.h new file mode 100644 index 000000000000..34aaa4603347 --- /dev/null +++ b/arch/s390/include/asm/param.h @@ -0,0 +1,30 @@ +/* + * include/asm-s390/param.h + * + * S390 version + * + * Derived from "include/asm-i386/param.h" + */ + +#ifndef _ASMS390_PARAM_H +#define _ASMS390_PARAM_H + +#ifdef __KERNEL__ +# define HZ CONFIG_HZ /* Internal kernel timer frequency */ +# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h new file mode 100644 index 000000000000..42a145c9ddd6 --- /dev/null +++ b/arch/s390/include/asm/pci.h @@ -0,0 +1,10 @@ +#ifndef __ASM_S390_PCI_H +#define __ASM_S390_PCI_H + +/* S/390 systems don't have a PCI bus. This file is just here because some stupid .c code + * includes it even if CONFIG_PCI is not set. + */ +#define PCI_DMA_BUS_IS_PHYS (0) + +#endif /* __ASM_S390_PCI_H */ + diff --git a/arch/s390/include/asm/percpu.h b/arch/s390/include/asm/percpu.h new file mode 100644 index 000000000000..408d60b4f75b --- /dev/null +++ b/arch/s390/include/asm/percpu.h @@ -0,0 +1,37 @@ +#ifndef __ARCH_S390_PERCPU__ +#define __ARCH_S390_PERCPU__ + +#include +#include + +/* + * s390 uses its own implementation for per cpu data, the offset of + * the cpu local data area is cached in the cpu's lowcore memory. + * For 64 bit module code s390 forces the use of a GOT slot for the + * address of the per cpu variable. This is needed because the module + * may be more than 4G above the per cpu area. + */ +#if defined(__s390x__) && defined(MODULE) + +#define SHIFT_PERCPU_PTR(ptr,offset) (({ \ + extern int simple_identifier_##var(void); \ + unsigned long *__ptr; \ + asm ( "larl %0, %1@GOTENT" \ + : "=a" (__ptr) : "X" (ptr) ); \ + (typeof(ptr))((*__ptr) + (offset)); })) + +#else + +#define SHIFT_PERCPU_PTR(ptr, offset) (({ \ + extern int simple_identifier_##var(void); \ + unsigned long __ptr; \ + asm ( "" : "=a" (__ptr) : "0" (ptr) ); \ + (typeof(ptr)) (__ptr + (offset)); })) + +#endif + +#define __my_cpu_offset S390_lowcore.percpu_offset + +#include + +#endif /* __ARCH_S390_PERCPU__ */ diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h new file mode 100644 index 000000000000..f5b2bf3d7c1d --- /dev/null +++ b/arch/s390/include/asm/pgalloc.h @@ -0,0 +1,174 @@ +/* + * include/asm-s390/pgalloc.h + * + * S390 version + * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Hartmut Penner (hp@de.ibm.com) + * Martin Schwidefsky (schwidefsky@de.ibm.com) + * + * Derived from "include/asm-i386/pgalloc.h" + * Copyright (C) 1994 Linus Torvalds + */ + +#ifndef _S390_PGALLOC_H +#define _S390_PGALLOC_H + +#include +#include +#include + +#define check_pgt_cache() do {} while (0) + +unsigned long *crst_table_alloc(struct mm_struct *, int); +void crst_table_free(struct mm_struct *, unsigned long *); + +unsigned long *page_table_alloc(struct mm_struct *); +void page_table_free(struct mm_struct *, unsigned long *); +void disable_noexec(struct mm_struct *, struct task_struct *); + +static inline void clear_table(unsigned long *s, unsigned long val, size_t n) +{ + *s = val; + n = (n / 256) - 1; + asm volatile( +#ifdef CONFIG_64BIT + " mvc 8(248,%0),0(%0)\n" +#else + " mvc 4(252,%0),0(%0)\n" +#endif + "0: mvc 256(256,%0),0(%0)\n" + " la %0,256(%0)\n" + " brct %1,0b\n" + : "+a" (s), "+d" (n)); +} + +static inline void crst_table_init(unsigned long *crst, unsigned long entry) +{ + clear_table(crst, entry, sizeof(unsigned long)*2048); + crst = get_shadow_table(crst); + if (crst) + clear_table(crst, entry, sizeof(unsigned long)*2048); +} + +#ifndef __s390x__ + +static inline unsigned long pgd_entry_type(struct mm_struct *mm) +{ + return _SEGMENT_ENTRY_EMPTY; +} + +#define pud_alloc_one(mm,address) ({ BUG(); ((pud_t *)2); }) +#define pud_free(mm, x) do { } while (0) + +#define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) +#define pmd_free(mm, x) do { } while (0) + +#define pgd_populate(mm, pgd, pud) BUG() +#define pgd_populate_kernel(mm, pgd, pud) BUG() + +#define pud_populate(mm, pud, pmd) BUG() +#define pud_populate_kernel(mm, pud, pmd) BUG() + +#else /* __s390x__ */ + +static inline unsigned long pgd_entry_type(struct mm_struct *mm) +{ + if (mm->context.asce_limit <= (1UL << 31)) + return _SEGMENT_ENTRY_EMPTY; + if (mm->context.asce_limit <= (1UL << 42)) + return _REGION3_ENTRY_EMPTY; + return _REGION2_ENTRY_EMPTY; +} + +int crst_table_upgrade(struct mm_struct *, unsigned long limit); +void crst_table_downgrade(struct mm_struct *, unsigned long limit); + +static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address) +{ + unsigned long *table = crst_table_alloc(mm, mm->context.noexec); + if (table) + crst_table_init(table, _REGION3_ENTRY_EMPTY); + return (pud_t *) table; +} +#define pud_free(mm, pud) crst_table_free(mm, (unsigned long *) pud) + +static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr) +{ + unsigned long *table = crst_table_alloc(mm, mm->context.noexec); + if (table) + crst_table_init(table, _SEGMENT_ENTRY_EMPTY); + return (pmd_t *) table; +} +#define pmd_free(mm, pmd) crst_table_free(mm, (unsigned long *) pmd) + +static inline void pgd_populate_kernel(struct mm_struct *mm, + pgd_t *pgd, pud_t *pud) +{ + pgd_val(*pgd) = _REGION2_ENTRY | __pa(pud); +} + +static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud) +{ + pgd_populate_kernel(mm, pgd, pud); + if (mm->context.noexec) { + pgd = get_shadow_table(pgd); + pud = get_shadow_table(pud); + pgd_populate_kernel(mm, pgd, pud); + } +} + +static inline void pud_populate_kernel(struct mm_struct *mm, + pud_t *pud, pmd_t *pmd) +{ + pud_val(*pud) = _REGION3_ENTRY | __pa(pmd); +} + +static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) +{ + pud_populate_kernel(mm, pud, pmd); + if (mm->context.noexec) { + pud = get_shadow_table(pud); + pmd = get_shadow_table(pmd); + pud_populate_kernel(mm, pud, pmd); + } +} + +#endif /* __s390x__ */ + +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + INIT_LIST_HEAD(&mm->context.crst_list); + INIT_LIST_HEAD(&mm->context.pgtable_list); + return (pgd_t *) crst_table_alloc(mm, s390_noexec); +} +#define pgd_free(mm, pgd) crst_table_free(mm, (unsigned long *) pgd) + +static inline void pmd_populate_kernel(struct mm_struct *mm, + pmd_t *pmd, pte_t *pte) +{ + pmd_val(*pmd) = _SEGMENT_ENTRY + __pa(pte); +} + +static inline void pmd_populate(struct mm_struct *mm, + pmd_t *pmd, pgtable_t pte) +{ + pmd_populate_kernel(mm, pmd, pte); + if (mm->context.noexec) { + pmd = get_shadow_table(pmd); + pmd_populate_kernel(mm, pmd, pte + PTRS_PER_PTE); + } +} + +#define pmd_pgtable(pmd) \ + (pgtable_t)(pmd_val(pmd) & -sizeof(pte_t)*PTRS_PER_PTE) + +/* + * page table entry allocation/free routines. + */ +#define pte_alloc_one_kernel(mm, vmaddr) ((pte_t *) page_table_alloc(mm)) +#define pte_alloc_one(mm, vmaddr) ((pte_t *) page_table_alloc(mm)) + +#define pte_free_kernel(mm, pte) page_table_free(mm, (unsigned long *) pte) +#define pte_free(mm, pte) page_table_free(mm, (unsigned long *) pte) + +#endif /* _S390_PGALLOC_H */ diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h new file mode 100644 index 000000000000..0bdb704ae051 --- /dev/null +++ b/arch/s390/include/asm/pgtable.h @@ -0,0 +1,1093 @@ +/* + * include/asm-s390/pgtable.h + * + * S390 version + * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Hartmut Penner (hp@de.ibm.com) + * Ulrich Weigand (weigand@de.ibm.com) + * Martin Schwidefsky (schwidefsky@de.ibm.com) + * + * Derived from "include/asm-i386/pgtable.h" + */ + +#ifndef _ASM_S390_PGTABLE_H +#define _ASM_S390_PGTABLE_H + +/* + * The Linux memory management assumes a three-level page table setup. For + * s390 31 bit we "fold" the mid level into the top-level page table, so + * that we physically have the same two-level page table as the s390 mmu + * expects in 31 bit mode. For s390 64 bit we use three of the five levels + * the hardware provides (region first and region second tables are not + * used). + * + * The "pgd_xxx()" functions are trivial for a folded two-level + * setup: the pgd is never bad, and a pmd always exists (as it's folded + * into the pgd entry) + * + * This file contains the functions and defines necessary to modify and use + * the S390 page table tree. + */ +#ifndef __ASSEMBLY__ +#include +#include +#include +#include +#include + +extern pgd_t swapper_pg_dir[] __attribute__ ((aligned (4096))); +extern void paging_init(void); +extern void vmem_map_init(void); + +/* + * The S390 doesn't have any external MMU info: the kernel page + * tables contain all the necessary information. + */ +#define update_mmu_cache(vma, address, pte) do { } while (0) + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern char empty_zero_page[PAGE_SIZE]; +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) +#endif /* !__ASSEMBLY__ */ + +/* + * PMD_SHIFT determines the size of the area a second-level page + * table can map + * PGDIR_SHIFT determines what a third-level page table entry can map + */ +#ifndef __s390x__ +# define PMD_SHIFT 20 +# define PUD_SHIFT 20 +# define PGDIR_SHIFT 20 +#else /* __s390x__ */ +# define PMD_SHIFT 20 +# define PUD_SHIFT 31 +# define PGDIR_SHIFT 42 +#endif /* __s390x__ */ + +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) +#define PUD_SIZE (1UL << PUD_SHIFT) +#define PUD_MASK (~(PUD_SIZE-1)) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * entries per page directory level: the S390 is two-level, so + * we don't really have any PMD directory physically. + * for S390 segment-table entries are combined to one PGD + * that leads to 1024 pte per pgd + */ +#define PTRS_PER_PTE 256 +#ifndef __s390x__ +#define PTRS_PER_PMD 1 +#define PTRS_PER_PUD 1 +#else /* __s390x__ */ +#define PTRS_PER_PMD 2048 +#define PTRS_PER_PUD 2048 +#endif /* __s390x__ */ +#define PTRS_PER_PGD 2048 + +#define FIRST_USER_ADDRESS 0 + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %p.\n", __FILE__, __LINE__, (void *) pte_val(e)) +#define pmd_ERROR(e) \ + printk("%s:%d: bad pmd %p.\n", __FILE__, __LINE__, (void *) pmd_val(e)) +#define pud_ERROR(e) \ + printk("%s:%d: bad pud %p.\n", __FILE__, __LINE__, (void *) pud_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %p.\n", __FILE__, __LINE__, (void *) pgd_val(e)) + +#ifndef __ASSEMBLY__ +/* + * The vmalloc area will always be on the topmost area of the kernel + * mapping. We reserve 96MB (31bit) / 1GB (64bit) for vmalloc, + * which should be enough for any sane case. + * By putting vmalloc at the top, we maximise the gap between physical + * memory and vmalloc to catch misplaced memory accesses. As a side + * effect, this also makes sure that 64 bit module code cannot be used + * as system call address. + */ +#ifndef __s390x__ +#define VMALLOC_START 0x78000000UL +#define VMALLOC_END 0x7e000000UL +#define VMEM_MAP_END 0x80000000UL +#else /* __s390x__ */ +#define VMALLOC_START 0x3e000000000UL +#define VMALLOC_END 0x3e040000000UL +#define VMEM_MAP_END 0x40000000000UL +#endif /* __s390x__ */ + +/* + * VMEM_MAX_PHYS is the highest physical address that can be added to the 1:1 + * mapping. This needs to be calculated at compile time since the size of the + * VMEM_MAP is static but the size of struct page can change. + */ +#define VMEM_MAX_PAGES ((VMEM_MAP_END - VMALLOC_END) / sizeof(struct page)) +#define VMEM_MAX_PFN min(VMALLOC_START >> PAGE_SHIFT, VMEM_MAX_PAGES) +#define VMEM_MAX_PHYS ((VMEM_MAX_PFN << PAGE_SHIFT) & ~((16 << 20) - 1)) +#define vmemmap ((struct page *) VMALLOC_END) + +/* + * A 31 bit pagetable entry of S390 has following format: + * | PFRA | | OS | + * 0 0IP0 + * 00000000001111111111222222222233 + * 01234567890123456789012345678901 + * + * I Page-Invalid Bit: Page is not available for address-translation + * P Page-Protection Bit: Store access not possible for page + * + * A 31 bit segmenttable entry of S390 has following format: + * | P-table origin | |PTL + * 0 IC + * 00000000001111111111222222222233 + * 01234567890123456789012345678901 + * + * I Segment-Invalid Bit: Segment is not available for address-translation + * C Common-Segment Bit: Segment is not private (PoP 3-30) + * PTL Page-Table-Length: Page-table length (PTL+1*16 entries -> up to 256) + * + * The 31 bit segmenttable origin of S390 has following format: + * + * |S-table origin | | STL | + * X **GPS + * 00000000001111111111222222222233 + * 01234567890123456789012345678901 + * + * X Space-Switch event: + * G Segment-Invalid Bit: * + * P Private-Space Bit: Segment is not private (PoP 3-30) + * S Storage-Alteration: + * STL Segment-Table-Length: Segment-table length (STL+1*16 entries -> up to 2048) + * + * A 64 bit pagetable entry of S390 has following format: + * | PFRA |0IP0| OS | + * 0000000000111111111122222222223333333333444444444455555555556666 + * 0123456789012345678901234567890123456789012345678901234567890123 + * + * I Page-Invalid Bit: Page is not available for address-translation + * P Page-Protection Bit: Store access not possible for page + * + * A 64 bit segmenttable entry of S390 has following format: + * | P-table origin | TT + * 0000000000111111111122222222223333333333444444444455555555556666 + * 0123456789012345678901234567890123456789012345678901234567890123 + * + * I Segment-Invalid Bit: Segment is not available for address-translation + * C Common-Segment Bit: Segment is not private (PoP 3-30) + * P Page-Protection Bit: Store access not possible for page + * TT Type 00 + * + * A 64 bit region table entry of S390 has following format: + * | S-table origin | TF TTTL + * 0000000000111111111122222222223333333333444444444455555555556666 + * 0123456789012345678901234567890123456789012345678901234567890123 + * + * I Segment-Invalid Bit: Segment is not available for address-translation + * TT Type 01 + * TF + * TL Table length + * + * The 64 bit regiontable origin of S390 has following format: + * | region table origon | DTTL + * 0000000000111111111122222222223333333333444444444455555555556666 + * 0123456789012345678901234567890123456789012345678901234567890123 + * + * X Space-Switch event: + * G Segment-Invalid Bit: + * P Private-Space Bit: + * S Storage-Alteration: + * R Real space + * TL Table-Length: + * + * A storage key has the following format: + * | ACC |F|R|C|0| + * 0 3 4 5 6 7 + * ACC: access key + * F : fetch protection bit + * R : referenced bit + * C : changed bit + */ + +/* Hardware bits in the page table entry */ +#define _PAGE_RO 0x200 /* HW read-only bit */ +#define _PAGE_INVALID 0x400 /* HW invalid bit */ + +/* Software bits in the page table entry */ +#define _PAGE_SWT 0x001 /* SW pte type bit t */ +#define _PAGE_SWX 0x002 /* SW pte type bit x */ +#define _PAGE_SPECIAL 0x004 /* SW associated with special page */ +#define __HAVE_ARCH_PTE_SPECIAL + +/* Set of bits not changed in pte_modify */ +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_SPECIAL) + +/* Six different types of pages. */ +#define _PAGE_TYPE_EMPTY 0x400 +#define _PAGE_TYPE_NONE 0x401 +#define _PAGE_TYPE_SWAP 0x403 +#define _PAGE_TYPE_FILE 0x601 /* bit 0x002 is used for offset !! */ +#define _PAGE_TYPE_RO 0x200 +#define _PAGE_TYPE_RW 0x000 +#define _PAGE_TYPE_EX_RO 0x202 +#define _PAGE_TYPE_EX_RW 0x002 + +/* + * Only four types for huge pages, using the invalid bit and protection bit + * of a segment table entry. + */ +#define _HPAGE_TYPE_EMPTY 0x020 /* _SEGMENT_ENTRY_INV */ +#define _HPAGE_TYPE_NONE 0x220 +#define _HPAGE_TYPE_RO 0x200 /* _SEGMENT_ENTRY_RO */ +#define _HPAGE_TYPE_RW 0x000 + +/* + * PTE type bits are rather complicated. handle_pte_fault uses pte_present, + * pte_none and pte_file to find out the pte type WITHOUT holding the page + * table lock. ptep_clear_flush on the other hand uses ptep_clear_flush to + * invalidate a given pte. ipte sets the hw invalid bit and clears all tlbs + * for the page. The page table entry is set to _PAGE_TYPE_EMPTY afterwards. + * This change is done while holding the lock, but the intermediate step + * of a previously valid pte with the hw invalid bit set can be observed by + * handle_pte_fault. That makes it necessary that all valid pte types with + * the hw invalid bit set must be distinguishable from the four pte types + * empty, none, swap and file. + * + * irxt ipte irxt + * _PAGE_TYPE_EMPTY 1000 -> 1000 + * _PAGE_TYPE_NONE 1001 -> 1001 + * _PAGE_TYPE_SWAP 1011 -> 1011 + * _PAGE_TYPE_FILE 11?1 -> 11?1 + * _PAGE_TYPE_RO 0100 -> 1100 + * _PAGE_TYPE_RW 0000 -> 1000 + * _PAGE_TYPE_EX_RO 0110 -> 1110 + * _PAGE_TYPE_EX_RW 0010 -> 1010 + * + * pte_none is true for bits combinations 1000, 1010, 1100, 1110 + * pte_present is true for bits combinations 0000, 0010, 0100, 0110, 1001 + * pte_file is true for bits combinations 1101, 1111 + * swap pte is 1011 and 0001, 0011, 0101, 0111 are invalid. + */ + +/* Page status table bits for virtualization */ +#define RCP_PCL_BIT 55 +#define RCP_HR_BIT 54 +#define RCP_HC_BIT 53 +#define RCP_GR_BIT 50 +#define RCP_GC_BIT 49 + +#ifndef __s390x__ + +/* Bits in the segment table address-space-control-element */ +#define _ASCE_SPACE_SWITCH 0x80000000UL /* space switch event */ +#define _ASCE_ORIGIN_MASK 0x7ffff000UL /* segment table origin */ +#define _ASCE_PRIVATE_SPACE 0x100 /* private space control */ +#define _ASCE_ALT_EVENT 0x80 /* storage alteration event control */ +#define _ASCE_TABLE_LENGTH 0x7f /* 128 x 64 entries = 8k */ + +/* Bits in the segment table entry */ +#define _SEGMENT_ENTRY_ORIGIN 0x7fffffc0UL /* page table origin */ +#define _SEGMENT_ENTRY_INV 0x20 /* invalid segment table entry */ +#define _SEGMENT_ENTRY_COMMON 0x10 /* common segment bit */ +#define _SEGMENT_ENTRY_PTL 0x0f /* page table length */ + +#define _SEGMENT_ENTRY (_SEGMENT_ENTRY_PTL) +#define _SEGMENT_ENTRY_EMPTY (_SEGMENT_ENTRY_INV) + +#else /* __s390x__ */ + +/* Bits in the segment/region table address-space-control-element */ +#define _ASCE_ORIGIN ~0xfffUL/* segment table origin */ +#define _ASCE_PRIVATE_SPACE 0x100 /* private space control */ +#define _ASCE_ALT_EVENT 0x80 /* storage alteration event control */ +#define _ASCE_SPACE_SWITCH 0x40 /* space switch event */ +#define _ASCE_REAL_SPACE 0x20 /* real space control */ +#define _ASCE_TYPE_MASK 0x0c /* asce table type mask */ +#define _ASCE_TYPE_REGION1 0x0c /* region first table type */ +#define _ASCE_TYPE_REGION2 0x08 /* region second table type */ +#define _ASCE_TYPE_REGION3 0x04 /* region third table type */ +#define _ASCE_TYPE_SEGMENT 0x00 /* segment table type */ +#define _ASCE_TABLE_LENGTH 0x03 /* region table length */ + +/* Bits in the region table entry */ +#define _REGION_ENTRY_ORIGIN ~0xfffUL/* region/segment table origin */ +#define _REGION_ENTRY_INV 0x20 /* invalid region table entry */ +#define _REGION_ENTRY_TYPE_MASK 0x0c /* region/segment table type mask */ +#define _REGION_ENTRY_TYPE_R1 0x0c /* region first table type */ +#define _REGION_ENTRY_TYPE_R2 0x08 /* region second table type */ +#define _REGION_ENTRY_TYPE_R3 0x04 /* region third table type */ +#define _REGION_ENTRY_LENGTH 0x03 /* region third length */ + +#define _REGION1_ENTRY (_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_LENGTH) +#define _REGION1_ENTRY_EMPTY (_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_INV) +#define _REGION2_ENTRY (_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_LENGTH) +#define _REGION2_ENTRY_EMPTY (_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_INV) +#define _REGION3_ENTRY (_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_LENGTH) +#define _REGION3_ENTRY_EMPTY (_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_INV) + +/* Bits in the segment table entry */ +#define _SEGMENT_ENTRY_ORIGIN ~0x7ffUL/* segment table origin */ +#define _SEGMENT_ENTRY_RO 0x200 /* page protection bit */ +#define _SEGMENT_ENTRY_INV 0x20 /* invalid segment table entry */ + +#define _SEGMENT_ENTRY (0) +#define _SEGMENT_ENTRY_EMPTY (_SEGMENT_ENTRY_INV) + +#define _SEGMENT_ENTRY_LARGE 0x400 /* STE-format control, large page */ +#define _SEGMENT_ENTRY_CO 0x100 /* change-recording override */ + +#endif /* __s390x__ */ + +/* + * A user page table pointer has the space-switch-event bit, the + * private-space-control bit and the storage-alteration-event-control + * bit set. A kernel page table pointer doesn't need them. + */ +#define _ASCE_USER_BITS (_ASCE_SPACE_SWITCH | _ASCE_PRIVATE_SPACE | \ + _ASCE_ALT_EVENT) + +/* Bits int the storage key */ +#define _PAGE_CHANGED 0x02 /* HW changed bit */ +#define _PAGE_REFERENCED 0x04 /* HW referenced bit */ + +/* + * Page protection definitions. + */ +#define PAGE_NONE __pgprot(_PAGE_TYPE_NONE) +#define PAGE_RO __pgprot(_PAGE_TYPE_RO) +#define PAGE_RW __pgprot(_PAGE_TYPE_RW) +#define PAGE_EX_RO __pgprot(_PAGE_TYPE_EX_RO) +#define PAGE_EX_RW __pgprot(_PAGE_TYPE_EX_RW) + +#define PAGE_KERNEL PAGE_RW +#define PAGE_COPY PAGE_RO + +/* + * Dependent on the EXEC_PROTECT option s390 can do execute protection. + * Write permission always implies read permission. In theory with a + * primary/secondary page table execute only can be implemented but + * it would cost an additional bit in the pte to distinguish all the + * different pte types. To avoid that execute permission currently + * implies read permission as well. + */ + /*xwr*/ +#define __P000 PAGE_NONE +#define __P001 PAGE_RO +#define __P010 PAGE_RO +#define __P011 PAGE_RO +#define __P100 PAGE_EX_RO +#define __P101 PAGE_EX_RO +#define __P110 PAGE_EX_RO +#define __P111 PAGE_EX_RO + +#define __S000 PAGE_NONE +#define __S001 PAGE_RO +#define __S010 PAGE_RW +#define __S011 PAGE_RW +#define __S100 PAGE_EX_RO +#define __S101 PAGE_EX_RO +#define __S110 PAGE_EX_RW +#define __S111 PAGE_EX_RW + +#ifndef __s390x__ +# define PxD_SHADOW_SHIFT 1 +#else /* __s390x__ */ +# define PxD_SHADOW_SHIFT 2 +#endif /* __s390x__ */ + +static inline void *get_shadow_table(void *table) +{ + unsigned long addr, offset; + struct page *page; + + addr = (unsigned long) table; + offset = addr & ((PAGE_SIZE << PxD_SHADOW_SHIFT) - 1); + page = virt_to_page((void *)(addr ^ offset)); + return (void *)(addr_t)(page->index ? (page->index | offset) : 0UL); +} + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t entry) +{ + *ptep = entry; + if (mm->context.noexec) { + if (!(pte_val(entry) & _PAGE_INVALID) && + (pte_val(entry) & _PAGE_SWX)) + pte_val(entry) |= _PAGE_RO; + else + pte_val(entry) = _PAGE_TYPE_EMPTY; + ptep[PTRS_PER_PTE] = entry; + } +} + +/* + * pgd/pmd/pte query functions + */ +#ifndef __s390x__ + +static inline int pgd_present(pgd_t pgd) { return 1; } +static inline int pgd_none(pgd_t pgd) { return 0; } +static inline int pgd_bad(pgd_t pgd) { return 0; } + +static inline int pud_present(pud_t pud) { return 1; } +static inline int pud_none(pud_t pud) { return 0; } +static inline int pud_bad(pud_t pud) { return 0; } + +#else /* __s390x__ */ + +static inline int pgd_present(pgd_t pgd) +{ + if ((pgd_val(pgd) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R2) + return 1; + return (pgd_val(pgd) & _REGION_ENTRY_ORIGIN) != 0UL; +} + +static inline int pgd_none(pgd_t pgd) +{ + if ((pgd_val(pgd) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R2) + return 0; + return (pgd_val(pgd) & _REGION_ENTRY_INV) != 0UL; +} + +static inline int pgd_bad(pgd_t pgd) +{ + /* + * With dynamic page table levels the pgd can be a region table + * entry or a segment table entry. Check for the bit that are + * invalid for either table entry. + */ + unsigned long mask = + ~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INV & + ~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH; + return (pgd_val(pgd) & mask) != 0; +} + +static inline int pud_present(pud_t pud) +{ + if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R3) + return 1; + return (pud_val(pud) & _REGION_ENTRY_ORIGIN) != 0UL; +} + +static inline int pud_none(pud_t pud) +{ + if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R3) + return 0; + return (pud_val(pud) & _REGION_ENTRY_INV) != 0UL; +} + +static inline int pud_bad(pud_t pud) +{ + /* + * With dynamic page table levels the pud can be a region table + * entry or a segment table entry. Check for the bit that are + * invalid for either table entry. + */ + unsigned long mask = + ~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INV & + ~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH; + return (pud_val(pud) & mask) != 0; +} + +#endif /* __s390x__ */ + +static inline int pmd_present(pmd_t pmd) +{ + return (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) != 0UL; +} + +static inline int pmd_none(pmd_t pmd) +{ + return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) != 0UL; +} + +static inline int pmd_bad(pmd_t pmd) +{ + unsigned long mask = ~_SEGMENT_ENTRY_ORIGIN & ~_SEGMENT_ENTRY_INV; + return (pmd_val(pmd) & mask) != _SEGMENT_ENTRY; +} + +static inline int pte_none(pte_t pte) +{ + return (pte_val(pte) & _PAGE_INVALID) && !(pte_val(pte) & _PAGE_SWT); +} + +static inline int pte_present(pte_t pte) +{ + unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT | _PAGE_SWX; + return (pte_val(pte) & mask) == _PAGE_TYPE_NONE || + (!(pte_val(pte) & _PAGE_INVALID) && + !(pte_val(pte) & _PAGE_SWT)); +} + +static inline int pte_file(pte_t pte) +{ + unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT; + return (pte_val(pte) & mask) == _PAGE_TYPE_FILE; +} + +static inline int pte_special(pte_t pte) +{ + return (pte_val(pte) & _PAGE_SPECIAL); +} + +#define __HAVE_ARCH_PTE_SAME +#define pte_same(a,b) (pte_val(a) == pte_val(b)) + +static inline void rcp_lock(pte_t *ptep) +{ +#ifdef CONFIG_PGSTE + unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE); + preempt_disable(); + while (test_and_set_bit(RCP_PCL_BIT, pgste)) + ; +#endif +} + +static inline void rcp_unlock(pte_t *ptep) +{ +#ifdef CONFIG_PGSTE + unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE); + clear_bit(RCP_PCL_BIT, pgste); + preempt_enable(); +#endif +} + +/* forward declaration for SetPageUptodate in page-flags.h*/ +static inline void page_clear_dirty(struct page *page); +#include + +static inline void ptep_rcp_copy(pte_t *ptep) +{ +#ifdef CONFIG_PGSTE + struct page *page = virt_to_page(pte_val(*ptep)); + unsigned int skey; + unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE); + + skey = page_get_storage_key(page_to_phys(page)); + if (skey & _PAGE_CHANGED) + set_bit_simple(RCP_GC_BIT, pgste); + if (skey & _PAGE_REFERENCED) + set_bit_simple(RCP_GR_BIT, pgste); + if (test_and_clear_bit_simple(RCP_HC_BIT, pgste)) + SetPageDirty(page); + if (test_and_clear_bit_simple(RCP_HR_BIT, pgste)) + SetPageReferenced(page); +#endif +} + +/* + * query functions pte_write/pte_dirty/pte_young only work if + * pte_present() is true. Undefined behaviour if not.. + */ +static inline int pte_write(pte_t pte) +{ + return (pte_val(pte) & _PAGE_RO) == 0; +} + +static inline int pte_dirty(pte_t pte) +{ + /* A pte is neither clean nor dirty on s/390. The dirty bit + * is in the storage key. See page_test_and_clear_dirty for + * details. + */ + return 0; +} + +static inline int pte_young(pte_t pte) +{ + /* A pte is neither young nor old on s/390. The young bit + * is in the storage key. See page_test_and_clear_young for + * details. + */ + return 0; +} + +/* + * pgd/pmd/pte modification functions + */ + +#ifndef __s390x__ + +#define pgd_clear(pgd) do { } while (0) +#define pud_clear(pud) do { } while (0) + +#else /* __s390x__ */ + +static inline void pgd_clear_kernel(pgd_t * pgd) +{ + if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2) + pgd_val(*pgd) = _REGION2_ENTRY_EMPTY; +} + +static inline void pgd_clear(pgd_t * pgd) +{ + pgd_t *shadow = get_shadow_table(pgd); + + pgd_clear_kernel(pgd); + if (shadow) + pgd_clear_kernel(shadow); +} + +static inline void pud_clear_kernel(pud_t *pud) +{ + if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3) + pud_val(*pud) = _REGION3_ENTRY_EMPTY; +} + +static inline void pud_clear(pud_t *pud) +{ + pud_t *shadow = get_shadow_table(pud); + + pud_clear_kernel(pud); + if (shadow) + pud_clear_kernel(shadow); +} + +#endif /* __s390x__ */ + +static inline void pmd_clear_kernel(pmd_t * pmdp) +{ + pmd_val(*pmdp) = _SEGMENT_ENTRY_EMPTY; +} + +static inline void pmd_clear(pmd_t *pmd) +{ + pmd_t *shadow = get_shadow_table(pmd); + + pmd_clear_kernel(pmd); + if (shadow) + pmd_clear_kernel(shadow); +} + +static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + if (mm->context.pgstes) + ptep_rcp_copy(ptep); + pte_val(*ptep) = _PAGE_TYPE_EMPTY; + if (mm->context.noexec) + pte_val(ptep[PTRS_PER_PTE]) = _PAGE_TYPE_EMPTY; +} + +/* + * The following pte modification functions only work if + * pte_present() is true. Undefined behaviour if not.. + */ +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte_val(pte) &= _PAGE_CHG_MASK; + pte_val(pte) |= pgprot_val(newprot); + return pte; +} + +static inline pte_t pte_wrprotect(pte_t pte) +{ + /* Do not clobber _PAGE_TYPE_NONE pages! */ + if (!(pte_val(pte) & _PAGE_INVALID)) + pte_val(pte) |= _PAGE_RO; + return pte; +} + +static inline pte_t pte_mkwrite(pte_t pte) +{ + pte_val(pte) &= ~_PAGE_RO; + return pte; +} + +static inline pte_t pte_mkclean(pte_t pte) +{ + /* The only user of pte_mkclean is the fork() code. + We must *not* clear the *physical* page dirty bit + just because fork() wants to clear the dirty bit in + *one* of the page's mappings. So we just do nothing. */ + return pte; +} + +static inline pte_t pte_mkdirty(pte_t pte) +{ + /* We do not explicitly set the dirty bit because the + * sske instruction is slow. It is faster to let the + * next instruction set the dirty bit. + */ + return pte; +} + +static inline pte_t pte_mkold(pte_t pte) +{ + /* S/390 doesn't keep its dirty/referenced bit in the pte. + * There is no point in clearing the real referenced bit. + */ + return pte; +} + +static inline pte_t pte_mkyoung(pte_t pte) +{ + /* S/390 doesn't keep its dirty/referenced bit in the pte. + * There is no point in setting the real referenced bit. + */ + return pte; +} + +static inline pte_t pte_mkspecial(pte_t pte) +{ + pte_val(pte) |= _PAGE_SPECIAL; + return pte; +} + +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ +#ifdef CONFIG_PGSTE + unsigned long physpage; + int young; + unsigned long *pgste; + + if (!vma->vm_mm->context.pgstes) + return 0; + physpage = pte_val(*ptep) & PAGE_MASK; + pgste = (unsigned long *) (ptep + PTRS_PER_PTE); + + young = ((page_get_storage_key(physpage) & _PAGE_REFERENCED) != 0); + rcp_lock(ptep); + if (young) + set_bit_simple(RCP_GR_BIT, pgste); + young |= test_and_clear_bit_simple(RCP_HR_BIT, pgste); + rcp_unlock(ptep); + return young; +#endif + return 0; +} + +#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH +static inline int ptep_clear_flush_young(struct vm_area_struct *vma, + unsigned long address, pte_t *ptep) +{ + /* No need to flush TLB + * On s390 reference bits are in storage key and never in TLB + * With virtualization we handle the reference bit, without we + * we can simply return */ +#ifdef CONFIG_PGSTE + return ptep_test_and_clear_young(vma, address, ptep); +#endif + return 0; +} + +static inline void __ptep_ipte(unsigned long address, pte_t *ptep) +{ + if (!(pte_val(*ptep) & _PAGE_INVALID)) { +#ifndef __s390x__ + /* pto must point to the start of the segment table */ + pte_t *pto = (pte_t *) (((unsigned long) ptep) & 0x7ffffc00); +#else + /* ipte in zarch mode can do the math */ + pte_t *pto = ptep; +#endif + asm volatile( + " ipte %2,%3" + : "=m" (*ptep) : "m" (*ptep), + "a" (pto), "a" (address)); + } +} + +static inline void ptep_invalidate(struct mm_struct *mm, + unsigned long address, pte_t *ptep) +{ + if (mm->context.pgstes) { + rcp_lock(ptep); + __ptep_ipte(address, ptep); + ptep_rcp_copy(ptep); + pte_val(*ptep) = _PAGE_TYPE_EMPTY; + rcp_unlock(ptep); + return; + } + __ptep_ipte(address, ptep); + pte_val(*ptep) = _PAGE_TYPE_EMPTY; + if (mm->context.noexec) { + __ptep_ipte(address, ptep + PTRS_PER_PTE); + pte_val(*(ptep + PTRS_PER_PTE)) = _PAGE_TYPE_EMPTY; + } +} + +/* + * This is hard to understand. ptep_get_and_clear and ptep_clear_flush + * both clear the TLB for the unmapped pte. The reason is that + * ptep_get_and_clear is used in common code (e.g. change_pte_range) + * to modify an active pte. The sequence is + * 1) ptep_get_and_clear + * 2) set_pte_at + * 3) flush_tlb_range + * On s390 the tlb needs to get flushed with the modification of the pte + * if the pte is active. The only way how this can be implemented is to + * have ptep_get_and_clear do the tlb flush. In exchange flush_tlb_range + * is a nop. + */ +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +#define ptep_get_and_clear(__mm, __address, __ptep) \ +({ \ + pte_t __pte = *(__ptep); \ + if (atomic_read(&(__mm)->mm_users) > 1 || \ + (__mm) != current->active_mm) \ + ptep_invalidate(__mm, __address, __ptep); \ + else \ + pte_clear((__mm), (__address), (__ptep)); \ + __pte; \ +}) + +#define __HAVE_ARCH_PTEP_CLEAR_FLUSH +static inline pte_t ptep_clear_flush(struct vm_area_struct *vma, + unsigned long address, pte_t *ptep) +{ + pte_t pte = *ptep; + ptep_invalidate(vma->vm_mm, address, ptep); + return pte; +} + +/* + * The batched pte unmap code uses ptep_get_and_clear_full to clear the + * ptes. Here an optimization is possible. tlb_gather_mmu flushes all + * tlbs of an mm if it can guarantee that the ptes of the mm_struct + * cannot be accessed while the batched unmap is running. In this case + * full==1 and a simple pte_clear is enough. See tlb.h. + */ +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL +static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, + unsigned long addr, + pte_t *ptep, int full) +{ + pte_t pte = *ptep; + + if (full) + pte_clear(mm, addr, ptep); + else + ptep_invalidate(mm, addr, ptep); + return pte; +} + +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +#define ptep_set_wrprotect(__mm, __addr, __ptep) \ +({ \ + pte_t __pte = *(__ptep); \ + if (pte_write(__pte)) { \ + if (atomic_read(&(__mm)->mm_users) > 1 || \ + (__mm) != current->active_mm) \ + ptep_invalidate(__mm, __addr, __ptep); \ + set_pte_at(__mm, __addr, __ptep, pte_wrprotect(__pte)); \ + } \ +}) + +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +#define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \ +({ \ + int __changed = !pte_same(*(__ptep), __entry); \ + if (__changed) { \ + ptep_invalidate((__vma)->vm_mm, __addr, __ptep); \ + set_pte_at((__vma)->vm_mm, __addr, __ptep, __entry); \ + } \ + __changed; \ +}) + +/* + * Test and clear dirty bit in storage key. + * We can't clear the changed bit atomically. This is a potential + * race against modification of the referenced bit. This function + * should therefore only be called if it is not mapped in any + * address space. + */ +#define __HAVE_ARCH_PAGE_TEST_DIRTY +static inline int page_test_dirty(struct page *page) +{ + return (page_get_storage_key(page_to_phys(page)) & _PAGE_CHANGED) != 0; +} + +#define __HAVE_ARCH_PAGE_CLEAR_DIRTY +static inline void page_clear_dirty(struct page *page) +{ + page_set_storage_key(page_to_phys(page), PAGE_DEFAULT_KEY); +} + +/* + * Test and clear referenced bit in storage key. + */ +#define __HAVE_ARCH_PAGE_TEST_AND_CLEAR_YOUNG +static inline int page_test_and_clear_young(struct page *page) +{ + unsigned long physpage = page_to_phys(page); + int ccode; + + asm volatile( + " rrbe 0,%1\n" + " ipm %0\n" + " srl %0,28\n" + : "=d" (ccode) : "a" (physpage) : "cc" ); + return ccode & 2; +} + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot) +{ + pte_t __pte; + pte_val(__pte) = physpage + pgprot_val(pgprot); + return __pte; +} + +static inline pte_t mk_pte(struct page *page, pgprot_t pgprot) +{ + unsigned long physpage = page_to_phys(page); + + return mk_pte_phys(physpage, pgprot); +} + +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) +#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) +#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE-1)) + +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +#ifndef __s390x__ + +#define pmd_deref(pmd) (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) +#define pud_deref(pmd) ({ BUG(); 0UL; }) +#define pgd_deref(pmd) ({ BUG(); 0UL; }) + +#define pud_offset(pgd, address) ((pud_t *) pgd) +#define pmd_offset(pud, address) ((pmd_t *) pud + pmd_index(address)) + +#else /* __s390x__ */ + +#define pmd_deref(pmd) (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) +#define pud_deref(pud) (pud_val(pud) & _REGION_ENTRY_ORIGIN) +#define pgd_deref(pgd) (pgd_val(pgd) & _REGION_ENTRY_ORIGIN) + +static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address) +{ + pud_t *pud = (pud_t *) pgd; + if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2) + pud = (pud_t *) pgd_deref(*pgd); + return pud + pud_index(address); +} + +static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) +{ + pmd_t *pmd = (pmd_t *) pud; + if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3) + pmd = (pmd_t *) pud_deref(*pud); + return pmd + pmd_index(address); +} + +#endif /* __s390x__ */ + +#define pfn_pte(pfn,pgprot) mk_pte_phys(__pa((pfn) << PAGE_SHIFT),(pgprot)) +#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT) +#define pte_page(x) pfn_to_page(pte_pfn(x)) + +#define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT) + +/* Find an entry in the lowest level page table.. */ +#define pte_offset(pmd, addr) ((pte_t *) pmd_deref(*(pmd)) + pte_index(addr)) +#define pte_offset_kernel(pmd, address) pte_offset(pmd,address) +#define pte_offset_map(pmd, address) pte_offset_kernel(pmd, address) +#define pte_offset_map_nested(pmd, address) pte_offset_kernel(pmd, address) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +/* + * 31 bit swap entry format: + * A page-table entry has some bits we have to treat in a special way. + * Bits 0, 20 and bit 23 have to be zero, otherwise an specification + * exception will occur instead of a page translation exception. The + * specifiation exception has the bad habit not to store necessary + * information in the lowcore. + * Bit 21 and bit 22 are the page invalid bit and the page protection + * bit. We set both to indicate a swapped page. + * Bit 30 and 31 are used to distinguish the different page types. For + * a swapped page these bits need to be zero. + * This leaves the bits 1-19 and bits 24-29 to store type and offset. + * We use the 5 bits from 25-29 for the type and the 20 bits from 1-19 + * plus 24 for the offset. + * 0| offset |0110|o|type |00| + * 0 0000000001111111111 2222 2 22222 33 + * 0 1234567890123456789 0123 4 56789 01 + * + * 64 bit swap entry format: + * A page-table entry has some bits we have to treat in a special way. + * Bits 52 and bit 55 have to be zero, otherwise an specification + * exception will occur instead of a page translation exception. The + * specifiation exception has the bad habit not to store necessary + * information in the lowcore. + * Bit 53 and bit 54 are the page invalid bit and the page protection + * bit. We set both to indicate a swapped page. + * Bit 62 and 63 are used to distinguish the different page types. For + * a swapped page these bits need to be zero. + * This leaves the bits 0-51 and bits 56-61 to store type and offset. + * We use the 5 bits from 57-61 for the type and the 53 bits from 0-51 + * plus 56 for the offset. + * | offset |0110|o|type |00| + * 0000000000111111111122222222223333333333444444444455 5555 5 55566 66 + * 0123456789012345678901234567890123456789012345678901 2345 6 78901 23 + */ +#ifndef __s390x__ +#define __SWP_OFFSET_MASK (~0UL >> 12) +#else +#define __SWP_OFFSET_MASK (~0UL >> 11) +#endif +static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset) +{ + pte_t pte; + offset &= __SWP_OFFSET_MASK; + pte_val(pte) = _PAGE_TYPE_SWAP | ((type & 0x1f) << 2) | + ((offset & 1UL) << 7) | ((offset & ~1UL) << 11); + return pte; +} + +#define __swp_type(entry) (((entry).val >> 2) & 0x1f) +#define __swp_offset(entry) (((entry).val >> 11) | (((entry).val >> 7) & 1)) +#define __swp_entry(type,offset) ((swp_entry_t) { pte_val(mk_swap_pte((type),(offset))) }) + +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +#ifndef __s390x__ +# define PTE_FILE_MAX_BITS 26 +#else /* __s390x__ */ +# define PTE_FILE_MAX_BITS 59 +#endif /* __s390x__ */ + +#define pte_to_pgoff(__pte) \ + ((((__pte).pte >> 12) << 7) + (((__pte).pte >> 1) & 0x7f)) + +#define pgoff_to_pte(__off) \ + ((pte_t) { ((((__off) & 0x7f) << 1) + (((__off) >> 7) << 12)) \ + | _PAGE_TYPE_FILE }) + +#endif /* !__ASSEMBLY__ */ + +#define kern_addr_valid(addr) (1) + +extern int vmem_add_mapping(unsigned long start, unsigned long size); +extern int vmem_remove_mapping(unsigned long start, unsigned long size); +extern int s390_enable_sie(void); + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +#include + +#endif /* _S390_PAGE_H */ diff --git a/arch/s390/include/asm/poll.h b/arch/s390/include/asm/poll.h new file mode 100644 index 000000000000..c98509d3149e --- /dev/null +++ b/arch/s390/include/asm/poll.h @@ -0,0 +1 @@ +#include diff --git a/arch/s390/include/asm/posix_types.h b/arch/s390/include/asm/posix_types.h new file mode 100644 index 000000000000..397d93fba3a7 --- /dev/null +++ b/arch/s390/include/asm/posix_types.h @@ -0,0 +1,111 @@ +/* + * include/asm-s390/posix_types.h + * + * S390 version + * + * Derived from "include/asm-i386/posix_types.h" + */ + +#ifndef __ARCH_S390_POSIX_TYPES_H +#define __ARCH_S390_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned long __kernel_size_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +#ifndef __s390x__ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#else /* __s390x__ */ + +typedef unsigned int __kernel_ino_t; +typedef unsigned int __kernel_mode_t; +typedef unsigned int __kernel_nlink_t; +typedef int __kernel_ipc_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +typedef long __kernel_ssize_t; +typedef long __kernel_ptrdiff_t; +typedef unsigned long __kernel_sigset_t; /* at least 32 bits */ +typedef __kernel_uid_t __kernel_old_uid_t; +typedef __kernel_gid_t __kernel_old_gid_t; +typedef __kernel_uid_t __kernel_uid32_t; +typedef __kernel_gid_t __kernel_gid32_t; +typedef unsigned short __kernel_old_dev_t; + +#endif /* __s390x__ */ + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL)*/ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL)*/ +} __kernel_fsid_t; + + +#ifdef __KERNEL__ + +#undef __FD_SET +static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] |= (1UL<<_rem); +} + +#undef __FD_CLR +static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); +} + +#undef __FD_ISSET +static inline int __FD_ISSET(unsigned long fd, const __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + return (fdsetp->fds_bits[_tmp] & (1UL<<_rem)) != 0; +} + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) \ + ((void) memset ((void *) (fdsetp), 0, sizeof (__kernel_fd_set))) + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h new file mode 100644 index 000000000000..4af80af2a88f --- /dev/null +++ b/arch/s390/include/asm/processor.h @@ -0,0 +1,360 @@ +/* + * include/asm-s390/processor.h + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Hartmut Penner (hp@de.ibm.com), + * Martin Schwidefsky (schwidefsky@de.ibm.com) + * + * Derived from "include/asm-i386/processor.h" + * Copyright (C) 1994, Linus Torvalds + */ + +#ifndef __ASM_S390_PROCESSOR_H +#define __ASM_S390_PROCESSOR_H + +#include + +#ifdef __KERNEL__ +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; }) + +/* + * CPU type and hardware bug flags. Kept separately for each CPU. + * Members of this structure are referenced in head.S, so think twice + * before touching them. [mj] + */ + +typedef struct +{ + unsigned int version : 8; + unsigned int ident : 24; + unsigned int machine : 16; + unsigned int unused : 16; +} __attribute__ ((packed)) cpuid_t; + +static inline void get_cpu_id(cpuid_t *ptr) +{ + asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr)); +} + +struct cpuinfo_S390 +{ + cpuid_t cpu_id; + __u16 cpu_addr; + __u16 cpu_nr; + unsigned long loops_per_jiffy; + unsigned long *pgd_quick; +#ifdef __s390x__ + unsigned long *pmd_quick; +#endif /* __s390x__ */ + unsigned long *pte_quick; + unsigned long pgtable_cache_sz; +}; + +extern void s390_adjust_jiffies(void); +extern void print_cpu_info(struct cpuinfo_S390 *); +extern int get_cpu_capability(unsigned int *); + +/* + * User space process size: 2GB for 31 bit, 4TB for 64 bit. + */ +#ifndef __s390x__ + +#define TASK_SIZE (1UL << 31) +#define TASK_UNMAPPED_BASE (1UL << 30) + +#else /* __s390x__ */ + +#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk,TIF_31BIT) ? \ + (1UL << 31) : (1UL << 53)) +#define TASK_UNMAPPED_BASE (test_thread_flag(TIF_31BIT) ? \ + (1UL << 30) : (1UL << 41)) +#define TASK_SIZE TASK_SIZE_OF(current) + +#endif /* __s390x__ */ + +#ifdef __KERNEL__ + +#ifndef __s390x__ +#define STACK_TOP (1UL << 31) +#define STACK_TOP_MAX (1UL << 31) +#else /* __s390x__ */ +#define STACK_TOP (1UL << (test_thread_flag(TIF_31BIT) ? 31:42)) +#define STACK_TOP_MAX (1UL << 42) +#endif /* __s390x__ */ + + +#endif + +#define HAVE_ARCH_PICK_MMAP_LAYOUT + +typedef struct { + __u32 ar4; +} mm_segment_t; + +/* + * Thread structure + */ +struct thread_struct { + s390_fp_regs fp_regs; + unsigned int acrs[NUM_ACRS]; + unsigned long ksp; /* kernel stack pointer */ + mm_segment_t mm_segment; + unsigned long prot_addr; /* address of protection-excep. */ + unsigned int trap_no; + per_struct per_info; + /* Used to give failing instruction back to user for ieee exceptions */ + unsigned long ieee_instruction_pointer; + /* pfault_wait is used to block the process on a pfault event */ + unsigned long pfault_wait; +}; + +typedef struct thread_struct thread_struct; + +/* + * Stack layout of a C stack frame. + */ +#ifndef __PACK_STACK +struct stack_frame { + unsigned long back_chain; + unsigned long empty1[5]; + unsigned long gprs[10]; + unsigned int empty2[8]; +}; +#else +struct stack_frame { + unsigned long empty1[5]; + unsigned int empty2[8]; + unsigned long gprs[10]; + unsigned long back_chain; +}; +#endif + +#define ARCH_MIN_TASKALIGN 8 + +#define INIT_THREAD { \ + .ksp = sizeof(init_stack) + (unsigned long) &init_stack, \ +} + +/* + * Do necessary setup to start up a new thread. + */ +#define start_thread(regs, new_psw, new_stackp) do { \ + set_fs(USER_DS); \ + regs->psw.mask = psw_user_bits; \ + regs->psw.addr = new_psw | PSW_ADDR_AMODE; \ + regs->gprs[15] = new_stackp; \ +} while (0) + +#define start_thread31(regs, new_psw, new_stackp) do { \ + set_fs(USER_DS); \ + regs->psw.mask = psw_user32_bits; \ + regs->psw.addr = new_psw | PSW_ADDR_AMODE; \ + regs->gprs[15] = new_stackp; \ + crst_table_downgrade(current->mm, 1UL << 31); \ +} while (0) + +/* Forward declaration, a strange C thing */ +struct task_struct; +struct mm_struct; +struct seq_file; + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +/* + * Return saved PC of a blocked thread. + */ +extern unsigned long thread_saved_pc(struct task_struct *t); + +/* + * Print register of task into buffer. Used in fs/proc/array.c. + */ +extern void task_show_regs(struct seq_file *m, struct task_struct *task); + +extern void show_code(struct pt_regs *regs); + +unsigned long get_wchan(struct task_struct *p); +#define task_pt_regs(tsk) ((struct pt_regs *) \ + (task_stack_page(tsk) + THREAD_SIZE) - 1) +#define KSTK_EIP(tsk) (task_pt_regs(tsk)->psw.addr) +#define KSTK_ESP(tsk) (task_pt_regs(tsk)->gprs[15]) + +/* + * Give up the time slice of the virtual PU. + */ +static inline void cpu_relax(void) +{ + if (MACHINE_HAS_DIAG44) + asm volatile("diag 0,0,68"); + barrier(); +} + +static inline void psw_set_key(unsigned int key) +{ + asm volatile("spka 0(%0)" : : "d" (key)); +} + +/* + * Set PSW to specified value. + */ +static inline void __load_psw(psw_t psw) +{ +#ifndef __s390x__ + asm volatile("lpsw 0(%0)" : : "a" (&psw), "m" (psw) : "cc"); +#else + asm volatile("lpswe 0(%0)" : : "a" (&psw), "m" (psw) : "cc"); +#endif +} + +/* + * Set PSW mask to specified value, while leaving the + * PSW addr pointing to the next instruction. + */ + +static inline void __load_psw_mask (unsigned long mask) +{ + unsigned long addr; + psw_t psw; + + psw.mask = mask; + +#ifndef __s390x__ + asm volatile( + " basr %0,0\n" + "0: ahi %0,1f-0b\n" + " st %0,4(%1)\n" + " lpsw 0(%1)\n" + "1:" + : "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc"); +#else /* __s390x__ */ + asm volatile( + " larl %0,1f\n" + " stg %0,8(%1)\n" + " lpswe 0(%1)\n" + "1:" + : "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc"); +#endif /* __s390x__ */ +} + +/* + * Function to stop a processor until an interruption occurred + */ +static inline void enabled_wait(void) +{ + __load_psw_mask(PSW_BASE_BITS | PSW_MASK_IO | PSW_MASK_EXT | + PSW_MASK_MCHECK | PSW_MASK_WAIT | PSW_DEFAULT_KEY); +} + +/* + * Function to drop a processor into disabled wait state + */ + +static inline void disabled_wait(unsigned long code) +{ + unsigned long ctl_buf; + psw_t dw_psw; + + dw_psw.mask = PSW_BASE_BITS | PSW_MASK_WAIT; + dw_psw.addr = code; + /* + * Store status and then load disabled wait psw, + * the processor is dead afterwards + */ +#ifndef __s390x__ + asm volatile( + " stctl 0,0,0(%2)\n" + " ni 0(%2),0xef\n" /* switch off protection */ + " lctl 0,0,0(%2)\n" + " stpt 0xd8\n" /* store timer */ + " stckc 0xe0\n" /* store clock comparator */ + " stpx 0x108\n" /* store prefix register */ + " stam 0,15,0x120\n" /* store access registers */ + " std 0,0x160\n" /* store f0 */ + " std 2,0x168\n" /* store f2 */ + " std 4,0x170\n" /* store f4 */ + " std 6,0x178\n" /* store f6 */ + " stm 0,15,0x180\n" /* store general registers */ + " stctl 0,15,0x1c0\n" /* store control registers */ + " oi 0x1c0,0x10\n" /* fake protection bit */ + " lpsw 0(%1)" + : "=m" (ctl_buf) + : "a" (&dw_psw), "a" (&ctl_buf), "m" (dw_psw) : "cc"); +#else /* __s390x__ */ + asm volatile( + " stctg 0,0,0(%2)\n" + " ni 4(%2),0xef\n" /* switch off protection */ + " lctlg 0,0,0(%2)\n" + " lghi 1,0x1000\n" + " stpt 0x328(1)\n" /* store timer */ + " stckc 0x330(1)\n" /* store clock comparator */ + " stpx 0x318(1)\n" /* store prefix register */ + " stam 0,15,0x340(1)\n"/* store access registers */ + " stfpc 0x31c(1)\n" /* store fpu control */ + " std 0,0x200(1)\n" /* store f0 */ + " std 1,0x208(1)\n" /* store f1 */ + " std 2,0x210(1)\n" /* store f2 */ + " std 3,0x218(1)\n" /* store f3 */ + " std 4,0x220(1)\n" /* store f4 */ + " std 5,0x228(1)\n" /* store f5 */ + " std 6,0x230(1)\n" /* store f6 */ + " std 7,0x238(1)\n" /* store f7 */ + " std 8,0x240(1)\n" /* store f8 */ + " std 9,0x248(1)\n" /* store f9 */ + " std 10,0x250(1)\n" /* store f10 */ + " std 11,0x258(1)\n" /* store f11 */ + " std 12,0x260(1)\n" /* store f12 */ + " std 13,0x268(1)\n" /* store f13 */ + " std 14,0x270(1)\n" /* store f14 */ + " std 15,0x278(1)\n" /* store f15 */ + " stmg 0,15,0x280(1)\n"/* store general registers */ + " stctg 0,15,0x380(1)\n"/* store control registers */ + " oi 0x384(1),0x10\n"/* fake protection bit */ + " lpswe 0(%1)" + : "=m" (ctl_buf) + : "a" (&dw_psw), "a" (&ctl_buf), "m" (dw_psw) : "cc", "0"); +#endif /* __s390x__ */ +} + +/* + * Basic Machine Check/Program Check Handler. + */ + +extern void s390_base_mcck_handler(void); +extern void s390_base_pgm_handler(void); +extern void s390_base_ext_handler(void); + +extern void (*s390_base_mcck_handler_fn)(void); +extern void (*s390_base_pgm_handler_fn)(void); +extern void (*s390_base_ext_handler_fn)(void); + +#define ARCH_LOW_ADDRESS_LIMIT 0x7fffffffUL + +#endif + +/* + * Helper macro for exception table entries + */ +#ifndef __s390x__ +#define EX_TABLE(_fault,_target) \ + ".section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long " #_fault "," #_target "\n" \ + ".previous\n" +#else +#define EX_TABLE(_fault,_target) \ + ".section __ex_table,\"a\"\n" \ + " .align 8\n" \ + " .quad " #_fault "," #_target "\n" \ + ".previous\n" +#endif + +#endif /* __ASM_S390_PROCESSOR_H */ diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h new file mode 100644 index 000000000000..af2c9ac28a07 --- /dev/null +++ b/arch/s390/include/asm/ptrace.h @@ -0,0 +1,499 @@ +/* + * include/asm-s390/ptrace.h + * + * S390 version + * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) + */ + +#ifndef _S390_PTRACE_H +#define _S390_PTRACE_H + +/* + * Offsets in the user_regs_struct. They are used for the ptrace + * system call and in entry.S + */ +#ifndef __s390x__ + +#define PT_PSWMASK 0x00 +#define PT_PSWADDR 0x04 +#define PT_GPR0 0x08 +#define PT_GPR1 0x0C +#define PT_GPR2 0x10 +#define PT_GPR3 0x14 +#define PT_GPR4 0x18 +#define PT_GPR5 0x1C +#define PT_GPR6 0x20 +#define PT_GPR7 0x24 +#define PT_GPR8 0x28 +#define PT_GPR9 0x2C +#define PT_GPR10 0x30 +#define PT_GPR11 0x34 +#define PT_GPR12 0x38 +#define PT_GPR13 0x3C +#define PT_GPR14 0x40 +#define PT_GPR15 0x44 +#define PT_ACR0 0x48 +#define PT_ACR1 0x4C +#define PT_ACR2 0x50 +#define PT_ACR3 0x54 +#define PT_ACR4 0x58 +#define PT_ACR5 0x5C +#define PT_ACR6 0x60 +#define PT_ACR7 0x64 +#define PT_ACR8 0x68 +#define PT_ACR9 0x6C +#define PT_ACR10 0x70 +#define PT_ACR11 0x74 +#define PT_ACR12 0x78 +#define PT_ACR13 0x7C +#define PT_ACR14 0x80 +#define PT_ACR15 0x84 +#define PT_ORIGGPR2 0x88 +#define PT_FPC 0x90 +/* + * A nasty fact of life that the ptrace api + * only supports passing of longs. + */ +#define PT_FPR0_HI 0x98 +#define PT_FPR0_LO 0x9C +#define PT_FPR1_HI 0xA0 +#define PT_FPR1_LO 0xA4 +#define PT_FPR2_HI 0xA8 +#define PT_FPR2_LO 0xAC +#define PT_FPR3_HI 0xB0 +#define PT_FPR3_LO 0xB4 +#define PT_FPR4_HI 0xB8 +#define PT_FPR4_LO 0xBC +#define PT_FPR5_HI 0xC0 +#define PT_FPR5_LO 0xC4 +#define PT_FPR6_HI 0xC8 +#define PT_FPR6_LO 0xCC +#define PT_FPR7_HI 0xD0 +#define PT_FPR7_LO 0xD4 +#define PT_FPR8_HI 0xD8 +#define PT_FPR8_LO 0XDC +#define PT_FPR9_HI 0xE0 +#define PT_FPR9_LO 0xE4 +#define PT_FPR10_HI 0xE8 +#define PT_FPR10_LO 0xEC +#define PT_FPR11_HI 0xF0 +#define PT_FPR11_LO 0xF4 +#define PT_FPR12_HI 0xF8 +#define PT_FPR12_LO 0xFC +#define PT_FPR13_HI 0x100 +#define PT_FPR13_LO 0x104 +#define PT_FPR14_HI 0x108 +#define PT_FPR14_LO 0x10C +#define PT_FPR15_HI 0x110 +#define PT_FPR15_LO 0x114 +#define PT_CR_9 0x118 +#define PT_CR_10 0x11C +#define PT_CR_11 0x120 +#define PT_IEEE_IP 0x13C +#define PT_LASTOFF PT_IEEE_IP +#define PT_ENDREGS 0x140-1 + +#define GPR_SIZE 4 +#define CR_SIZE 4 + +#define STACK_FRAME_OVERHEAD 96 /* size of minimum stack frame */ + +#else /* __s390x__ */ + +#define PT_PSWMASK 0x00 +#define PT_PSWADDR 0x08 +#define PT_GPR0 0x10 +#define PT_GPR1 0x18 +#define PT_GPR2 0x20 +#define PT_GPR3 0x28 +#define PT_GPR4 0x30 +#define PT_GPR5 0x38 +#define PT_GPR6 0x40 +#define PT_GPR7 0x48 +#define PT_GPR8 0x50 +#define PT_GPR9 0x58 +#define PT_GPR10 0x60 +#define PT_GPR11 0x68 +#define PT_GPR12 0x70 +#define PT_GPR13 0x78 +#define PT_GPR14 0x80 +#define PT_GPR15 0x88 +#define PT_ACR0 0x90 +#define PT_ACR1 0x94 +#define PT_ACR2 0x98 +#define PT_ACR3 0x9C +#define PT_ACR4 0xA0 +#define PT_ACR5 0xA4 +#define PT_ACR6 0xA8 +#define PT_ACR7 0xAC +#define PT_ACR8 0xB0 +#define PT_ACR9 0xB4 +#define PT_ACR10 0xB8 +#define PT_ACR11 0xBC +#define PT_ACR12 0xC0 +#define PT_ACR13 0xC4 +#define PT_ACR14 0xC8 +#define PT_ACR15 0xCC +#define PT_ORIGGPR2 0xD0 +#define PT_FPC 0xD8 +#define PT_FPR0 0xE0 +#define PT_FPR1 0xE8 +#define PT_FPR2 0xF0 +#define PT_FPR3 0xF8 +#define PT_FPR4 0x100 +#define PT_FPR5 0x108 +#define PT_FPR6 0x110 +#define PT_FPR7 0x118 +#define PT_FPR8 0x120 +#define PT_FPR9 0x128 +#define PT_FPR10 0x130 +#define PT_FPR11 0x138 +#define PT_FPR12 0x140 +#define PT_FPR13 0x148 +#define PT_FPR14 0x150 +#define PT_FPR15 0x158 +#define PT_CR_9 0x160 +#define PT_CR_10 0x168 +#define PT_CR_11 0x170 +#define PT_IEEE_IP 0x1A8 +#define PT_LASTOFF PT_IEEE_IP +#define PT_ENDREGS 0x1B0-1 + +#define GPR_SIZE 8 +#define CR_SIZE 8 + +#define STACK_FRAME_OVERHEAD 160 /* size of minimum stack frame */ + +#endif /* __s390x__ */ + +#define NUM_GPRS 16 +#define NUM_FPRS 16 +#define NUM_CRS 16 +#define NUM_ACRS 16 + +#define FPR_SIZE 8 +#define FPC_SIZE 4 +#define FPC_PAD_SIZE 4 /* gcc insists on aligning the fpregs */ +#define ACR_SIZE 4 + + +#define PTRACE_OLDSETOPTIONS 21 + +#ifndef __ASSEMBLY__ +#include +#include + +typedef union +{ + float f; + double d; + __u64 ui; + struct + { + __u32 hi; + __u32 lo; + } fp; +} freg_t; + +typedef struct +{ + __u32 fpc; + freg_t fprs[NUM_FPRS]; +} s390_fp_regs; + +#define FPC_EXCEPTION_MASK 0xF8000000 +#define FPC_FLAGS_MASK 0x00F80000 +#define FPC_DXC_MASK 0x0000FF00 +#define FPC_RM_MASK 0x00000003 +#define FPC_VALID_MASK 0xF8F8FF03 + +/* this typedef defines how a Program Status Word looks like */ +typedef struct +{ + unsigned long mask; + unsigned long addr; +} __attribute__ ((aligned(8))) psw_t; + +typedef struct +{ + __u32 mask; + __u32 addr; +} __attribute__ ((aligned(8))) psw_compat_t; + +#ifndef __s390x__ + +#define PSW_MASK_PER 0x40000000UL +#define PSW_MASK_DAT 0x04000000UL +#define PSW_MASK_IO 0x02000000UL +#define PSW_MASK_EXT 0x01000000UL +#define PSW_MASK_KEY 0x00F00000UL +#define PSW_MASK_MCHECK 0x00040000UL +#define PSW_MASK_WAIT 0x00020000UL +#define PSW_MASK_PSTATE 0x00010000UL +#define PSW_MASK_ASC 0x0000C000UL +#define PSW_MASK_CC 0x00003000UL +#define PSW_MASK_PM 0x00000F00UL + +#define PSW_ADDR_AMODE 0x80000000UL +#define PSW_ADDR_INSN 0x7FFFFFFFUL + +#define PSW_BASE_BITS 0x00080000UL +#define PSW_DEFAULT_KEY (((unsigned long) PAGE_DEFAULT_ACC) << 20) + +#define PSW_ASC_PRIMARY 0x00000000UL +#define PSW_ASC_ACCREG 0x00004000UL +#define PSW_ASC_SECONDARY 0x00008000UL +#define PSW_ASC_HOME 0x0000C000UL + +#else /* __s390x__ */ + +#define PSW_MASK_PER 0x4000000000000000UL +#define PSW_MASK_DAT 0x0400000000000000UL +#define PSW_MASK_IO 0x0200000000000000UL +#define PSW_MASK_EXT 0x0100000000000000UL +#define PSW_MASK_KEY 0x00F0000000000000UL +#define PSW_MASK_MCHECK 0x0004000000000000UL +#define PSW_MASK_WAIT 0x0002000000000000UL +#define PSW_MASK_PSTATE 0x0001000000000000UL +#define PSW_MASK_ASC 0x0000C00000000000UL +#define PSW_MASK_CC 0x0000300000000000UL +#define PSW_MASK_PM 0x00000F0000000000UL + +#define PSW_ADDR_AMODE 0x0000000000000000UL +#define PSW_ADDR_INSN 0xFFFFFFFFFFFFFFFFUL + +#define PSW_BASE_BITS 0x0000000180000000UL +#define PSW_BASE32_BITS 0x0000000080000000UL +#define PSW_DEFAULT_KEY (((unsigned long) PAGE_DEFAULT_ACC) << 52) + +#define PSW_ASC_PRIMARY 0x0000000000000000UL +#define PSW_ASC_ACCREG 0x0000400000000000UL +#define PSW_ASC_SECONDARY 0x0000800000000000UL +#define PSW_ASC_HOME 0x0000C00000000000UL + +extern long psw_user32_bits; + +#endif /* __s390x__ */ + +extern long psw_kernel_bits; +extern long psw_user_bits; + +/* This macro merges a NEW PSW mask specified by the user into + the currently active PSW mask CURRENT, modifying only those + bits in CURRENT that the user may be allowed to change: this + is the condition code and the program mask bits. */ +#define PSW_MASK_MERGE(CURRENT,NEW) \ + (((CURRENT) & ~(PSW_MASK_CC|PSW_MASK_PM)) | \ + ((NEW) & (PSW_MASK_CC|PSW_MASK_PM))) + +/* + * The s390_regs structure is used to define the elf_gregset_t. + */ +typedef struct +{ + psw_t psw; + unsigned long gprs[NUM_GPRS]; + unsigned int acrs[NUM_ACRS]; + unsigned long orig_gpr2; +} s390_regs; + +typedef struct +{ + psw_compat_t psw; + __u32 gprs[NUM_GPRS]; + __u32 acrs[NUM_ACRS]; + __u32 orig_gpr2; +} s390_compat_regs; + + +#ifdef __KERNEL__ +#include +#include + +/* + * The pt_regs struct defines the way the registers are stored on + * the stack during a system call. + */ +struct pt_regs +{ + unsigned long args[1]; + psw_t psw; + unsigned long gprs[NUM_GPRS]; + unsigned long orig_gpr2; + unsigned short ilc; + unsigned short trap; +}; +#endif + +/* + * Now for the program event recording (trace) definitions. + */ +typedef struct +{ + unsigned long cr[3]; +} per_cr_words; + +#define PER_EM_MASK 0xE8000000UL + +typedef struct +{ +#ifdef __s390x__ + unsigned : 32; +#endif /* __s390x__ */ + unsigned em_branching : 1; + unsigned em_instruction_fetch : 1; + /* + * Switching on storage alteration automatically fixes + * the storage alteration event bit in the users std. + */ + unsigned em_storage_alteration : 1; + unsigned em_gpr_alt_unused : 1; + unsigned em_store_real_address : 1; + unsigned : 3; + unsigned branch_addr_ctl : 1; + unsigned : 1; + unsigned storage_alt_space_ctl : 1; + unsigned : 21; + unsigned long starting_addr; + unsigned long ending_addr; +} per_cr_bits; + +typedef struct +{ + unsigned short perc_atmid; + unsigned long address; + unsigned char access_id; +} per_lowcore_words; + +typedef struct +{ + unsigned perc_branching : 1; + unsigned perc_instruction_fetch : 1; + unsigned perc_storage_alteration : 1; + unsigned perc_gpr_alt_unused : 1; + unsigned perc_store_real_address : 1; + unsigned : 3; + unsigned atmid_psw_bit_31 : 1; + unsigned atmid_validity_bit : 1; + unsigned atmid_psw_bit_32 : 1; + unsigned atmid_psw_bit_5 : 1; + unsigned atmid_psw_bit_16 : 1; + unsigned atmid_psw_bit_17 : 1; + unsigned si : 2; + unsigned long address; + unsigned : 4; + unsigned access_id : 4; +} per_lowcore_bits; + +typedef struct +{ + union { + per_cr_words words; + per_cr_bits bits; + } control_regs; + /* + * Use these flags instead of setting em_instruction_fetch + * directly they are used so that single stepping can be + * switched on & off while not affecting other tracing + */ + unsigned single_step : 1; + unsigned instruction_fetch : 1; + unsigned : 30; + /* + * These addresses are copied into cr10 & cr11 if single + * stepping is switched off + */ + unsigned long starting_addr; + unsigned long ending_addr; + union { + per_lowcore_words words; + per_lowcore_bits bits; + } lowcore; +} per_struct; + +typedef struct +{ + unsigned int len; + unsigned long kernel_addr; + unsigned long process_addr; +} ptrace_area; + +/* + * S/390 specific non posix ptrace requests. I chose unusual values so + * they are unlikely to clash with future ptrace definitions. + */ +#define PTRACE_PEEKUSR_AREA 0x5000 +#define PTRACE_POKEUSR_AREA 0x5001 +#define PTRACE_PEEKTEXT_AREA 0x5002 +#define PTRACE_PEEKDATA_AREA 0x5003 +#define PTRACE_POKETEXT_AREA 0x5004 +#define PTRACE_POKEDATA_AREA 0x5005 + +/* + * PT_PROT definition is loosely based on hppa bsd definition in + * gdb/hppab-nat.c + */ +#define PTRACE_PROT 21 + +typedef enum +{ + ptprot_set_access_watchpoint, + ptprot_set_write_watchpoint, + ptprot_disable_watchpoint +} ptprot_flags; + +typedef struct +{ + unsigned long lowaddr; + unsigned long hiaddr; + ptprot_flags prot; +} ptprot_area; + +/* Sequence of bytes for breakpoint illegal instruction. */ +#define S390_BREAKPOINT {0x0,0x1} +#define S390_BREAKPOINT_U16 ((__u16)0x0001) +#define S390_SYSCALL_OPCODE ((__u16)0x0a00) +#define S390_SYSCALL_SIZE 2 + +/* + * The user_regs_struct defines the way the user registers are + * store on the stack for signal handling. + */ +struct user_regs_struct +{ + psw_t psw; + unsigned long gprs[NUM_GPRS]; + unsigned int acrs[NUM_ACRS]; + unsigned long orig_gpr2; + s390_fp_regs fp_regs; + /* + * These per registers are in here so that gdb can modify them + * itself as there is no "official" ptrace interface for hardware + * watchpoints. This is the way intel does it. + */ + per_struct per_info; + unsigned long ieee_instruction_pointer; + /* Used to give failing instruction back to user for ieee exceptions */ +}; + +#ifdef __KERNEL__ +/* + * These are defined as per linux/ptrace.h, which see. + */ +#define arch_has_single_step() (1) +struct task_struct; +extern void user_enable_single_step(struct task_struct *); +extern void user_disable_single_step(struct task_struct *); + +#define __ARCH_WANT_COMPAT_SYS_PTRACE + +#define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0) +#define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN) +#define regs_return_value(regs)((regs)->gprs[2]) +#define profile_pc(regs) instruction_pointer(regs) +extern void show_regs(struct pt_regs * regs); +#endif /* __KERNEL__ */ +#endif /* __ASSEMBLY__ */ + +#endif /* _S390_PTRACE_H */ diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h new file mode 100644 index 000000000000..6813772171f2 --- /dev/null +++ b/arch/s390/include/asm/qdio.h @@ -0,0 +1,382 @@ +/* + * linux/include/asm-s390/qdio.h + * + * Copyright 2000,2008 IBM Corp. + * Author(s): Utz Bacher + * Jan Glauber + * + */ +#ifndef __QDIO_H__ +#define __QDIO_H__ + +#include +#include +#include + +#define QDIO_MAX_QUEUES_PER_IRQ 32 +#define QDIO_MAX_BUFFERS_PER_Q 128 +#define QDIO_MAX_BUFFERS_MASK (QDIO_MAX_BUFFERS_PER_Q - 1) +#define QDIO_MAX_ELEMENTS_PER_BUFFER 16 +#define QDIO_SBAL_SIZE 256 + +#define QDIO_QETH_QFMT 0 +#define QDIO_ZFCP_QFMT 1 +#define QDIO_IQDIO_QFMT 2 + +/** + * struct qdesfmt0 - queue descriptor, format 0 + * @sliba: storage list information block address + * @sla: storage list address + * @slsba: storage list state block address + * @akey: access key for DLIB + * @bkey: access key for SL + * @ckey: access key for SBALs + * @dkey: access key for SLSB + */ +struct qdesfmt0 { + u64 sliba; + u64 sla; + u64 slsba; + u32 : 32; + u32 akey : 4; + u32 bkey : 4; + u32 ckey : 4; + u32 dkey : 4; + u32 : 16; +} __attribute__ ((packed)); + +/** + * struct qdr - queue description record (QDR) + * @qfmt: queue format + * @pfmt: implementation dependent parameter format + * @ac: adapter characteristics + * @iqdcnt: input queue descriptor count + * @oqdcnt: output queue descriptor count + * @iqdsz: inpout queue descriptor size + * @oqdsz: output queue descriptor size + * @qiba: queue information block address + * @qkey: queue information block key + * @qdf0: queue descriptions + */ +struct qdr { + u32 qfmt : 8; + u32 pfmt : 8; + u32 : 8; + u32 ac : 8; + u32 : 8; + u32 iqdcnt : 8; + u32 : 8; + u32 oqdcnt : 8; + u32 : 8; + u32 iqdsz : 8; + u32 : 8; + u32 oqdsz : 8; + /* private: */ + u32 res[9]; + /* public: */ + u64 qiba; + u32 : 32; + u32 qkey : 4; + u32 : 28; + struct qdesfmt0 qdf0[126]; +} __attribute__ ((packed, aligned(4096))); + +#define QIB_AC_OUTBOUND_PCI_SUPPORTED 0x40 +#define QIB_RFLAGS_ENABLE_QEBSM 0x80 + +/** + * struct qib - queue information block (QIB) + * @qfmt: queue format + * @pfmt: implementation dependent parameter format + * @rflags: QEBSM + * @ac: adapter characteristics + * @isliba: absolute address of first input SLIB + * @osliba: absolute address of first output SLIB + * @ebcnam: adapter identifier in EBCDIC + * @parm: implementation dependent parameters + */ +struct qib { + u32 qfmt : 8; + u32 pfmt : 8; + u32 rflags : 8; + u32 ac : 8; + u32 : 32; + u64 isliba; + u64 osliba; + u32 : 32; + u32 : 32; + u8 ebcnam[8]; + /* private: */ + u8 res[88]; + /* public: */ + u8 parm[QDIO_MAX_BUFFERS_PER_Q]; +} __attribute__ ((packed, aligned(256))); + +/** + * struct slibe - storage list information block element (SLIBE) + * @parms: implementation dependent parameters + */ +struct slibe { + u64 parms; +}; + +/** + * struct slib - storage list information block (SLIB) + * @nsliba: next SLIB address (if any) + * @sla: SL address + * @slsba: SLSB address + * @slibe: SLIB elements + */ +struct slib { + u64 nsliba; + u64 sla; + u64 slsba; + /* private: */ + u8 res[1000]; + /* public: */ + struct slibe slibe[QDIO_MAX_BUFFERS_PER_Q]; +} __attribute__ ((packed, aligned(2048))); + +/** + * struct sbal_flags - storage block address list flags + * @last: last entry + * @cont: contiguous storage + * @frag: fragmentation + */ +struct sbal_flags { + u8 : 1; + u8 last : 1; + u8 cont : 1; + u8 : 1; + u8 frag : 2; + u8 : 2; +} __attribute__ ((packed)); + +#define SBAL_FLAGS_FIRST_FRAG 0x04000000UL +#define SBAL_FLAGS_MIDDLE_FRAG 0x08000000UL +#define SBAL_FLAGS_LAST_FRAG 0x0c000000UL +#define SBAL_FLAGS_LAST_ENTRY 0x40000000UL +#define SBAL_FLAGS_CONTIGUOUS 0x20000000UL + +#define SBAL_FLAGS0_DATA_CONTINUATION 0x20UL + +/* Awesome OpenFCP extensions */ +#define SBAL_FLAGS0_TYPE_STATUS 0x00UL +#define SBAL_FLAGS0_TYPE_WRITE 0x08UL +#define SBAL_FLAGS0_TYPE_READ 0x10UL +#define SBAL_FLAGS0_TYPE_WRITE_READ 0x18UL +#define SBAL_FLAGS0_MORE_SBALS 0x04UL +#define SBAL_FLAGS0_COMMAND 0x02UL +#define SBAL_FLAGS0_LAST_SBAL 0x00UL +#define SBAL_FLAGS0_ONLY_SBAL SBAL_FLAGS0_COMMAND +#define SBAL_FLAGS0_MIDDLE_SBAL SBAL_FLAGS0_MORE_SBALS +#define SBAL_FLAGS0_FIRST_SBAL SBAL_FLAGS0_MORE_SBALS | SBAL_FLAGS0_COMMAND +#define SBAL_FLAGS0_PCI 0x40 + +/** + * struct sbal_sbalf_0 - sbal flags for sbale 0 + * @pci: PCI indicator + * @cont: data continuation + * @sbtype: storage-block type (FCP) + */ +struct sbal_sbalf_0 { + u8 : 1; + u8 pci : 1; + u8 cont : 1; + u8 sbtype : 2; + u8 : 3; +} __attribute__ ((packed)); + +/** + * struct sbal_sbalf_1 - sbal flags for sbale 1 + * @key: storage key + */ +struct sbal_sbalf_1 { + u8 : 4; + u8 key : 4; +} __attribute__ ((packed)); + +/** + * struct sbal_sbalf_14 - sbal flags for sbale 14 + * @erridx: error index + */ +struct sbal_sbalf_14 { + u8 : 4; + u8 erridx : 4; +} __attribute__ ((packed)); + +/** + * struct sbal_sbalf_15 - sbal flags for sbale 15 + * @reason: reason for error state + */ +struct sbal_sbalf_15 { + u8 reason; +} __attribute__ ((packed)); + +/** + * union sbal_sbalf - storage block address list flags + * @i0: sbalf0 + * @i1: sbalf1 + * @i14: sbalf14 + * @i15: sblaf15 + * @value: raw value + */ +union sbal_sbalf { + struct sbal_sbalf_0 i0; + struct sbal_sbalf_1 i1; + struct sbal_sbalf_14 i14; + struct sbal_sbalf_15 i15; + u8 value; +}; + +/** + * struct qdio_buffer_element - SBAL entry + * @flags: flags + * @length: length + * @addr: address +*/ +struct qdio_buffer_element { + u32 flags; + u32 length; +#ifdef CONFIG_32BIT + /* private: */ + void *reserved; + /* public: */ +#endif + void *addr; +} __attribute__ ((packed, aligned(16))); + +/** + * struct qdio_buffer - storage block address list (SBAL) + * @element: SBAL entries + */ +struct qdio_buffer { + struct qdio_buffer_element element[QDIO_MAX_ELEMENTS_PER_BUFFER]; +} __attribute__ ((packed, aligned(256))); + +/** + * struct sl_element - storage list entry + * @sbal: absolute SBAL address + */ +struct sl_element { +#ifdef CONFIG_32BIT + /* private: */ + unsigned long reserved; + /* public: */ +#endif + unsigned long sbal; +} __attribute__ ((packed)); + +/** + * struct sl - storage list (SL) + * @element: SL entries + */ +struct sl { + struct sl_element element[QDIO_MAX_BUFFERS_PER_Q]; +} __attribute__ ((packed, aligned(1024))); + +/** + * struct slsb - storage list state block (SLSB) + * @val: state per buffer + */ +struct slsb { + u8 val[QDIO_MAX_BUFFERS_PER_Q]; +} __attribute__ ((packed, aligned(256))); + +struct qdio_ssqd_desc { + u8 flags; + u8:8; + u16 sch; + u8 qfmt; + u8 parm; + u8 qdioac1; + u8 sch_class; + u8 pcnt; + u8 icnt; + u8:8; + u8 ocnt; + u8:8; + u8 mbccnt; + u16 qdioac2; + u64 sch_token; + u64:64; +} __attribute__ ((packed)); + +/* params are: ccw_device, qdio_error, queue_number, + first element processed, number of elements processed, int_parm */ +typedef void qdio_handler_t(struct ccw_device *, unsigned int, int, + int, int, unsigned long); + +/* qdio errors reported to the upper-layer program */ +#define QDIO_ERROR_SIGA_ACCESS_EXCEPTION 0x10 +#define QDIO_ERROR_SIGA_BUSY 0x20 +#define QDIO_ERROR_ACTIVATE_CHECK_CONDITION 0x40 +#define QDIO_ERROR_SLSB_STATE 0x80 + +/* for qdio_initialize */ +#define QDIO_INBOUND_0COPY_SBALS 0x01 +#define QDIO_OUTBOUND_0COPY_SBALS 0x02 +#define QDIO_USE_OUTBOUND_PCIS 0x04 + +/* for qdio_cleanup */ +#define QDIO_FLAG_CLEANUP_USING_CLEAR 0x01 +#define QDIO_FLAG_CLEANUP_USING_HALT 0x02 + +/** + * struct qdio_initialize - qdio initalization data + * @cdev: associated ccw device + * @q_format: queue format + * @adapter_name: name for the adapter + * @qib_param_field_format: format for qib_parm_field + * @qib_param_field: pointer to 128 bytes or NULL, if no param field + * @input_slib_elements: pointer to no_input_qs * 128 words of data or NULL + * @output_slib_elements: pointer to no_output_qs * 128 words of data or NULL + * @no_input_qs: number of input queues + * @no_output_qs: number of output queues + * @input_handler: handler to be called for input queues + * @output_handler: handler to be called for output queues + * @int_parm: interruption parameter + * @flags: initialization flags + * @input_sbal_addr_array: address of no_input_qs * 128 pointers + * @output_sbal_addr_array: address of no_output_qs * 128 pointers + */ +struct qdio_initialize { + struct ccw_device *cdev; + unsigned char q_format; + unsigned char adapter_name[8]; + unsigned int qib_param_field_format; + unsigned char *qib_param_field; + unsigned long *input_slib_elements; + unsigned long *output_slib_elements; + unsigned int no_input_qs; + unsigned int no_output_qs; + qdio_handler_t *input_handler; + qdio_handler_t *output_handler; + unsigned long int_parm; + unsigned long flags; + void **input_sbal_addr_array; + void **output_sbal_addr_array; +}; + +#define QDIO_STATE_INACTIVE 0x00000002 /* after qdio_cleanup */ +#define QDIO_STATE_ESTABLISHED 0x00000004 /* after qdio_establish */ +#define QDIO_STATE_ACTIVE 0x00000008 /* after qdio_activate */ +#define QDIO_STATE_STOPPED 0x00000010 /* after queues went down */ + +#define QDIO_FLAG_SYNC_INPUT 0x01 +#define QDIO_FLAG_SYNC_OUTPUT 0x02 +#define QDIO_FLAG_PCI_OUT 0x10 + +extern int qdio_initialize(struct qdio_initialize *init_data); +extern int qdio_allocate(struct qdio_initialize *init_data); +extern int qdio_establish(struct qdio_initialize *init_data); +extern int qdio_activate(struct ccw_device *); + +extern int do_QDIO(struct ccw_device*, unsigned int flags, + int q_nr, int qidx, int count); +extern int qdio_cleanup(struct ccw_device*, int how); +extern int qdio_shutdown(struct ccw_device*, int how); +extern int qdio_free(struct ccw_device *); +extern struct qdio_ssqd_desc *qdio_get_ssqd_desc(struct ccw_device *cdev); + +#endif /* __QDIO_H__ */ diff --git a/arch/s390/include/asm/qeth.h b/arch/s390/include/asm/qeth.h new file mode 100644 index 000000000000..930d378ef75a --- /dev/null +++ b/arch/s390/include/asm/qeth.h @@ -0,0 +1,78 @@ +/* + * include/asm-s390/qeth.h + * + * ioctl definitions for qeth driver + * + * Copyright (C) 2004 IBM Corporation + * + * Author(s): Thomas Spatzier + * + */ +#ifndef __ASM_S390_QETH_IOCTL_H__ +#define __ASM_S390_QETH_IOCTL_H__ +#include + +#define SIOC_QETH_ARP_SET_NO_ENTRIES (SIOCDEVPRIVATE) +#define SIOC_QETH_ARP_QUERY_INFO (SIOCDEVPRIVATE + 1) +#define SIOC_QETH_ARP_ADD_ENTRY (SIOCDEVPRIVATE + 2) +#define SIOC_QETH_ARP_REMOVE_ENTRY (SIOCDEVPRIVATE + 3) +#define SIOC_QETH_ARP_FLUSH_CACHE (SIOCDEVPRIVATE + 4) +#define SIOC_QETH_ADP_SET_SNMP_CONTROL (SIOCDEVPRIVATE + 5) +#define SIOC_QETH_GET_CARD_TYPE (SIOCDEVPRIVATE + 6) + +struct qeth_arp_cache_entry { + __u8 macaddr[6]; + __u8 reserved1[2]; + __u8 ipaddr[16]; /* for both IPv4 and IPv6 */ + __u8 reserved2[32]; +} __attribute__ ((packed)); + +struct qeth_arp_qi_entry7 { + __u8 media_specific[32]; + __u8 macaddr_type; + __u8 ipaddr_type; + __u8 macaddr[6]; + __u8 ipaddr[4]; +} __attribute__((packed)); + +struct qeth_arp_qi_entry7_short { + __u8 macaddr_type; + __u8 ipaddr_type; + __u8 macaddr[6]; + __u8 ipaddr[4]; +} __attribute__((packed)); + +struct qeth_arp_qi_entry5 { + __u8 media_specific[32]; + __u8 macaddr_type; + __u8 ipaddr_type; + __u8 ipaddr[4]; +} __attribute__((packed)); + +struct qeth_arp_qi_entry5_short { + __u8 macaddr_type; + __u8 ipaddr_type; + __u8 ipaddr[4]; +} __attribute__((packed)); + +/* + * can be set by user if no "media specific information" is wanted + * -> saves a lot of space in user space buffer + */ +#define QETH_QARP_STRIP_ENTRIES 0x8000 +#define QETH_QARP_REQUEST_MASK 0x00ff + +/* data sent to user space as result of query arp ioctl */ +#define QETH_QARP_USER_DATA_SIZE 20000 +#define QETH_QARP_MASK_OFFSET 4 +#define QETH_QARP_ENTRIES_OFFSET 6 +struct qeth_arp_query_user_data { + union { + __u32 data_len; /* set by user space program */ + __u32 no_entries; /* set by kernel */ + } u; + __u16 mask_bits; + char *entries; +} __attribute__((packed)); + +#endif /* __ASM_S390_QETH_IOCTL_H__ */ diff --git a/arch/s390/include/asm/reset.h b/arch/s390/include/asm/reset.h new file mode 100644 index 000000000000..f584f4a52581 --- /dev/null +++ b/arch/s390/include/asm/reset.h @@ -0,0 +1,21 @@ +/* + * include/asm-s390/reset.h + * + * Copyright IBM Corp. 2006 + * Author(s): Heiko Carstens + */ + +#ifndef _ASM_S390_RESET_H +#define _ASM_S390_RESET_H + +#include + +struct reset_call { + struct list_head list; + void (*fn)(void); +}; + +extern void register_reset_call(struct reset_call *reset); +extern void unregister_reset_call(struct reset_call *reset); +extern void s390_reset_system(void); +#endif /* _ASM_S390_RESET_H */ diff --git a/arch/s390/include/asm/resource.h b/arch/s390/include/asm/resource.h new file mode 100644 index 000000000000..366c01de04f2 --- /dev/null +++ b/arch/s390/include/asm/resource.h @@ -0,0 +1,15 @@ +/* + * include/asm-s390/resource.h + * + * S390 version + * + * Derived from "include/asm-i386/resources.h" + */ + +#ifndef _S390_RESOURCE_H +#define _S390_RESOURCE_H + +#include + +#endif + diff --git a/arch/s390/include/asm/rwsem.h b/arch/s390/include/asm/rwsem.h new file mode 100644 index 000000000000..9d2a17971805 --- /dev/null +++ b/arch/s390/include/asm/rwsem.h @@ -0,0 +1,387 @@ +#ifndef _S390_RWSEM_H +#define _S390_RWSEM_H + +/* + * include/asm-s390/rwsem.h + * + * S390 version + * Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) + * + * Based on asm-alpha/semaphore.h and asm-i386/rwsem.h + */ + +/* + * + * The MSW of the count is the negated number of active writers and waiting + * lockers, and the LSW is the total number of active locks + * + * The lock count is initialized to 0 (no active and no waiting lockers). + * + * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case of an + * uncontended lock. This can be determined because XADD returns the old value. + * Readers increment by 1 and see a positive value when uncontended, negative + * if there are writers (and maybe) readers waiting (in which case it goes to + * sleep). + * + * The value of WAITING_BIAS supports up to 32766 waiting processes. This can + * be extended to 65534 by manually checking the whole MSW rather than relying + * on the S flag. + * + * The value of ACTIVE_BIAS supports up to 65535 active processes. + * + * This should be totally fair - if anything is waiting, a process that wants a + * lock will go to the back of the queue. When the currently active lock is + * released, if there's a writer at the front of the queue, then that and only + * that will be woken up; if there's a bunch of consequtive readers at the + * front, then they'll all be woken up, but no other readers will be. + */ + +#ifndef _LINUX_RWSEM_H +#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead" +#endif + +#ifdef __KERNEL__ + +#include +#include + +struct rwsem_waiter; + +extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *); +extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *); +extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *); +extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *); +extern struct rw_semaphore *rwsem_downgrade_write(struct rw_semaphore *); + +/* + * the semaphore definition + */ +struct rw_semaphore { + signed long count; + spinlock_t wait_lock; + struct list_head wait_list; +#ifdef CONFIG_DEBUG_LOCK_ALLOC + struct lockdep_map dep_map; +#endif +}; + +#ifndef __s390x__ +#define RWSEM_UNLOCKED_VALUE 0x00000000 +#define RWSEM_ACTIVE_BIAS 0x00000001 +#define RWSEM_ACTIVE_MASK 0x0000ffff +#define RWSEM_WAITING_BIAS (-0x00010000) +#else /* __s390x__ */ +#define RWSEM_UNLOCKED_VALUE 0x0000000000000000L +#define RWSEM_ACTIVE_BIAS 0x0000000000000001L +#define RWSEM_ACTIVE_MASK 0x00000000ffffffffL +#define RWSEM_WAITING_BIAS (-0x0000000100000000L) +#endif /* __s390x__ */ +#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS +#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) + +/* + * initialisation + */ + +#ifdef CONFIG_DEBUG_LOCK_ALLOC +# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } +#else +# define __RWSEM_DEP_MAP_INIT(lockname) +#endif + +#define __RWSEM_INITIALIZER(name) \ + { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait.lock), \ + LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) } + +#define DECLARE_RWSEM(name) \ + struct rw_semaphore name = __RWSEM_INITIALIZER(name) + +static inline void init_rwsem(struct rw_semaphore *sem) +{ + sem->count = RWSEM_UNLOCKED_VALUE; + spin_lock_init(&sem->wait_lock); + INIT_LIST_HEAD(&sem->wait_list); +} + +extern void __init_rwsem(struct rw_semaphore *sem, const char *name, + struct lock_class_key *key); + +#define init_rwsem(sem) \ +do { \ + static struct lock_class_key __key; \ + \ + __init_rwsem((sem), #sem, &__key); \ +} while (0) + + +/* + * lock for reading + */ +static inline void __down_read(struct rw_semaphore *sem) +{ + signed long old, new; + + asm volatile( +#ifndef __s390x__ + " l %0,0(%3)\n" + "0: lr %1,%0\n" + " ahi %1,%5\n" + " cs %0,%1,0(%3)\n" + " jl 0b" +#else /* __s390x__ */ + " lg %0,0(%3)\n" + "0: lgr %1,%0\n" + " aghi %1,%5\n" + " csg %0,%1,0(%3)\n" + " jl 0b" +#endif /* __s390x__ */ + : "=&d" (old), "=&d" (new), "=m" (sem->count) + : "a" (&sem->count), "m" (sem->count), + "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory"); + if (old < 0) + rwsem_down_read_failed(sem); +} + +/* + * trylock for reading -- returns 1 if successful, 0 if contention + */ +static inline int __down_read_trylock(struct rw_semaphore *sem) +{ + signed long old, new; + + asm volatile( +#ifndef __s390x__ + " l %0,0(%3)\n" + "0: ltr %1,%0\n" + " jm 1f\n" + " ahi %1,%5\n" + " cs %0,%1,0(%3)\n" + " jl 0b\n" + "1:" +#else /* __s390x__ */ + " lg %0,0(%3)\n" + "0: ltgr %1,%0\n" + " jm 1f\n" + " aghi %1,%5\n" + " csg %0,%1,0(%3)\n" + " jl 0b\n" + "1:" +#endif /* __s390x__ */ + : "=&d" (old), "=&d" (new), "=m" (sem->count) + : "a" (&sem->count), "m" (sem->count), + "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory"); + return old >= 0 ? 1 : 0; +} + +/* + * lock for writing + */ +static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) +{ + signed long old, new, tmp; + + tmp = RWSEM_ACTIVE_WRITE_BIAS; + asm volatile( +#ifndef __s390x__ + " l %0,0(%3)\n" + "0: lr %1,%0\n" + " a %1,%5\n" + " cs %0,%1,0(%3)\n" + " jl 0b" +#else /* __s390x__ */ + " lg %0,0(%3)\n" + "0: lgr %1,%0\n" + " ag %1,%5\n" + " csg %0,%1,0(%3)\n" + " jl 0b" +#endif /* __s390x__ */ + : "=&d" (old), "=&d" (new), "=m" (sem->count) + : "a" (&sem->count), "m" (sem->count), "m" (tmp) + : "cc", "memory"); + if (old != 0) + rwsem_down_write_failed(sem); +} + +static inline void __down_write(struct rw_semaphore *sem) +{ + __down_write_nested(sem, 0); +} + +/* + * trylock for writing -- returns 1 if successful, 0 if contention + */ +static inline int __down_write_trylock(struct rw_semaphore *sem) +{ + signed long old; + + asm volatile( +#ifndef __s390x__ + " l %0,0(%2)\n" + "0: ltr %0,%0\n" + " jnz 1f\n" + " cs %0,%4,0(%2)\n" + " jl 0b\n" +#else /* __s390x__ */ + " lg %0,0(%2)\n" + "0: ltgr %0,%0\n" + " jnz 1f\n" + " csg %0,%4,0(%2)\n" + " jl 0b\n" +#endif /* __s390x__ */ + "1:" + : "=&d" (old), "=m" (sem->count) + : "a" (&sem->count), "m" (sem->count), + "d" (RWSEM_ACTIVE_WRITE_BIAS) : "cc", "memory"); + return (old == RWSEM_UNLOCKED_VALUE) ? 1 : 0; +} + +/* + * unlock after reading + */ +static inline void __up_read(struct rw_semaphore *sem) +{ + signed long old, new; + + asm volatile( +#ifndef __s390x__ + " l %0,0(%3)\n" + "0: lr %1,%0\n" + " ahi %1,%5\n" + " cs %0,%1,0(%3)\n" + " jl 0b" +#else /* __s390x__ */ + " lg %0,0(%3)\n" + "0: lgr %1,%0\n" + " aghi %1,%5\n" + " csg %0,%1,0(%3)\n" + " jl 0b" +#endif /* __s390x__ */ + : "=&d" (old), "=&d" (new), "=m" (sem->count) + : "a" (&sem->count), "m" (sem->count), + "i" (-RWSEM_ACTIVE_READ_BIAS) + : "cc", "memory"); + if (new < 0) + if ((new & RWSEM_ACTIVE_MASK) == 0) + rwsem_wake(sem); +} + +/* + * unlock after writing + */ +static inline void __up_write(struct rw_semaphore *sem) +{ + signed long old, new, tmp; + + tmp = -RWSEM_ACTIVE_WRITE_BIAS; + asm volatile( +#ifndef __s390x__ + " l %0,0(%3)\n" + "0: lr %1,%0\n" + " a %1,%5\n" + " cs %0,%1,0(%3)\n" + " jl 0b" +#else /* __s390x__ */ + " lg %0,0(%3)\n" + "0: lgr %1,%0\n" + " ag %1,%5\n" + " csg %0,%1,0(%3)\n" + " jl 0b" +#endif /* __s390x__ */ + : "=&d" (old), "=&d" (new), "=m" (sem->count) + : "a" (&sem->count), "m" (sem->count), "m" (tmp) + : "cc", "memory"); + if (new < 0) + if ((new & RWSEM_ACTIVE_MASK) == 0) + rwsem_wake(sem); +} + +/* + * downgrade write lock to read lock + */ +static inline void __downgrade_write(struct rw_semaphore *sem) +{ + signed long old, new, tmp; + + tmp = -RWSEM_WAITING_BIAS; + asm volatile( +#ifndef __s390x__ + " l %0,0(%3)\n" + "0: lr %1,%0\n" + " a %1,%5\n" + " cs %0,%1,0(%3)\n" + " jl 0b" +#else /* __s390x__ */ + " lg %0,0(%3)\n" + "0: lgr %1,%0\n" + " ag %1,%5\n" + " csg %0,%1,0(%3)\n" + " jl 0b" +#endif /* __s390x__ */ + : "=&d" (old), "=&d" (new), "=m" (sem->count) + : "a" (&sem->count), "m" (sem->count), "m" (tmp) + : "cc", "memory"); + if (new > 1) + rwsem_downgrade_wake(sem); +} + +/* + * implement atomic add functionality + */ +static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem) +{ + signed long old, new; + + asm volatile( +#ifndef __s390x__ + " l %0,0(%3)\n" + "0: lr %1,%0\n" + " ar %1,%5\n" + " cs %0,%1,0(%3)\n" + " jl 0b" +#else /* __s390x__ */ + " lg %0,0(%3)\n" + "0: lgr %1,%0\n" + " agr %1,%5\n" + " csg %0,%1,0(%3)\n" + " jl 0b" +#endif /* __s390x__ */ + : "=&d" (old), "=&d" (new), "=m" (sem->count) + : "a" (&sem->count), "m" (sem->count), "d" (delta) + : "cc", "memory"); +} + +/* + * implement exchange and add functionality + */ +static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem) +{ + signed long old, new; + + asm volatile( +#ifndef __s390x__ + " l %0,0(%3)\n" + "0: lr %1,%0\n" + " ar %1,%5\n" + " cs %0,%1,0(%3)\n" + " jl 0b" +#else /* __s390x__ */ + " lg %0,0(%3)\n" + "0: lgr %1,%0\n" + " agr %1,%5\n" + " csg %0,%1,0(%3)\n" + " jl 0b" +#endif /* __s390x__ */ + : "=&d" (old), "=&d" (new), "=m" (sem->count) + : "a" (&sem->count), "m" (sem->count), "d" (delta) + : "cc", "memory"); + return new; +} + +static inline int rwsem_is_locked(struct rw_semaphore *sem) +{ + return (sem->count != 0); +} + +#endif /* __KERNEL__ */ +#endif /* _S390_RWSEM_H */ diff --git a/arch/s390/include/asm/s390_ext.h b/arch/s390/include/asm/s390_ext.h new file mode 100644 index 000000000000..2afc060266a2 --- /dev/null +++ b/arch/s390/include/asm/s390_ext.h @@ -0,0 +1,32 @@ +#ifndef _S390_EXTINT_H +#define _S390_EXTINT_H + +/* + * include/asm-s390/s390_ext.h + * + * S390 version + * Copyright IBM Corp. 1999,2007 + * Author(s): Holger Smolinski (Holger.Smolinski@de.ibm.com), + * Martin Schwidefsky (schwidefsky@de.ibm.com) + */ + +#include + +typedef void (*ext_int_handler_t)(__u16 code); + +typedef struct ext_int_info_t { + struct ext_int_info_t *next; + ext_int_handler_t handler; + __u16 code; +} ext_int_info_t; + +extern ext_int_info_t *ext_int_hash[]; + +int register_external_interrupt(__u16 code, ext_int_handler_t handler); +int register_early_external_interrupt(__u16 code, ext_int_handler_t handler, + ext_int_info_t *info); +int unregister_external_interrupt(__u16 code, ext_int_handler_t handler); +int unregister_early_external_interrupt(__u16 code, ext_int_handler_t handler, + ext_int_info_t *info); + +#endif diff --git a/arch/s390/include/asm/s390_rdev.h b/arch/s390/include/asm/s390_rdev.h new file mode 100644 index 000000000000..6fa20442a48c --- /dev/null +++ b/arch/s390/include/asm/s390_rdev.h @@ -0,0 +1,15 @@ +/* + * include/asm-s390/ccwdev.h + * + * Copyright (C) 2002,2005 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Cornelia Huck + * Carsten Otte + * + * Interface for s390 root device + */ + +#ifndef _S390_RDEV_H_ +#define _S390_RDEV_H_ +extern struct device *s390_root_dev_register(const char *); +extern void s390_root_dev_unregister(struct device *); +#endif /* _S390_RDEV_H_ */ diff --git a/arch/s390/include/asm/scatterlist.h b/arch/s390/include/asm/scatterlist.h new file mode 100644 index 000000000000..29ec8e28c8df --- /dev/null +++ b/arch/s390/include/asm/scatterlist.h @@ -0,0 +1,19 @@ +#ifndef _ASMS390_SCATTERLIST_H +#define _ASMS390_SCATTERLIST_H + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + unsigned int length; +}; + +#ifdef __s390x__ +#define ISA_DMA_THRESHOLD (0xffffffffffffffffUL) +#else +#define ISA_DMA_THRESHOLD (0xffffffffUL) +#endif + +#endif /* _ASMS390X_SCATTERLIST_H */ diff --git a/arch/s390/include/asm/schid.h b/arch/s390/include/asm/schid.h new file mode 100644 index 000000000000..825503cf3dc2 --- /dev/null +++ b/arch/s390/include/asm/schid.h @@ -0,0 +1,32 @@ +#ifndef ASM_SCHID_H +#define ASM_SCHID_H + +struct subchannel_id { + __u32 cssid : 8; + __u32 : 4; + __u32 m : 1; + __u32 ssid : 2; + __u32 one : 1; + __u32 sch_no : 16; +} __attribute__ ((packed, aligned(4))); + +#ifdef __KERNEL__ +#include + +/* Helper function for sane state of pre-allocated subchannel_id. */ +static inline void +init_subchannel_id(struct subchannel_id *schid) +{ + memset(schid, 0, sizeof(struct subchannel_id)); + schid->one = 1; +} + +static inline int +schid_equal(struct subchannel_id *schid1, struct subchannel_id *schid2) +{ + return !memcmp(schid1, schid2, sizeof(struct subchannel_id)); +} + +#endif /* __KERNEL__ */ + +#endif /* ASM_SCHID_H */ diff --git a/arch/s390/include/asm/sclp.h b/arch/s390/include/asm/sclp.h new file mode 100644 index 000000000000..fed7bee650a0 --- /dev/null +++ b/arch/s390/include/asm/sclp.h @@ -0,0 +1,58 @@ +/* + * include/asm-s390/sclp.h + * + * Copyright IBM Corp. 2007 + * Author(s): Heiko Carstens + */ + +#ifndef _ASM_S390_SCLP_H +#define _ASM_S390_SCLP_H + +#include +#include + +#define SCLP_CHP_INFO_MASK_SIZE 32 + +struct sclp_chp_info { + u8 recognized[SCLP_CHP_INFO_MASK_SIZE]; + u8 standby[SCLP_CHP_INFO_MASK_SIZE]; + u8 configured[SCLP_CHP_INFO_MASK_SIZE]; +}; + +#define LOADPARM_LEN 8 + +struct sclp_ipl_info { + int is_valid; + int has_dump; + char loadparm[LOADPARM_LEN]; +}; + +struct sclp_cpu_entry { + u8 address; + u8 reserved0[13]; + u8 type; + u8 reserved1; +} __attribute__((packed)); + +struct sclp_cpu_info { + unsigned int configured; + unsigned int standby; + unsigned int combined; + int has_cpu_type; + struct sclp_cpu_entry cpu[255]; +}; + +int sclp_get_cpu_info(struct sclp_cpu_info *info); +int sclp_cpu_configure(u8 cpu); +int sclp_cpu_deconfigure(u8 cpu); +void sclp_facilities_detect(void); +unsigned long long sclp_get_rnmax(void); +unsigned long long sclp_get_rzm(void); +int sclp_sdias_blk_count(void); +int sclp_sdias_copy(void *dest, int blk_num, int nr_blks); +int sclp_chp_configure(struct chp_id chpid); +int sclp_chp_deconfigure(struct chp_id chpid); +int sclp_chp_read_info(struct sclp_chp_info *info); +void sclp_get_ipl_info(struct sclp_ipl_info *info); + +#endif /* _ASM_S390_SCLP_H */ diff --git a/arch/s390/include/asm/sections.h b/arch/s390/include/asm/sections.h new file mode 100644 index 000000000000..fbd9116eb17b --- /dev/null +++ b/arch/s390/include/asm/sections.h @@ -0,0 +1,8 @@ +#ifndef _S390_SECTIONS_H +#define _S390_SECTIONS_H + +#include + +extern char _eshared[], _ehead[]; + +#endif diff --git a/arch/s390/include/asm/segment.h b/arch/s390/include/asm/segment.h new file mode 100644 index 000000000000..8bfce3475b1c --- /dev/null +++ b/arch/s390/include/asm/segment.h @@ -0,0 +1,4 @@ +#ifndef _ASM_SEGMENT_H +#define _ASM_SEGMENT_H + +#endif diff --git a/arch/s390/include/asm/sembuf.h b/arch/s390/include/asm/sembuf.h new file mode 100644 index 000000000000..32626b0cac4b --- /dev/null +++ b/arch/s390/include/asm/sembuf.h @@ -0,0 +1,29 @@ +#ifndef _S390_SEMBUF_H +#define _S390_SEMBUF_H + +/* + * The semid64_ds structure for S/390 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem (for !__s390x__) + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ +#ifndef __s390x__ + unsigned long __unused1; +#endif /* ! __s390x__ */ + __kernel_time_t sem_ctime; /* last change time */ +#ifndef __s390x__ + unsigned long __unused2; +#endif /* ! __s390x__ */ + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _S390_SEMBUF_H */ diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h new file mode 100644 index 000000000000..2bd9faeb3919 --- /dev/null +++ b/arch/s390/include/asm/setup.h @@ -0,0 +1,140 @@ +/* + * include/asm-s390/setup.h + * + * S390 version + * Copyright IBM Corp. 1999,2006 + */ + +#ifndef _ASM_S390_SETUP_H +#define _ASM_S390_SETUP_H + +#define COMMAND_LINE_SIZE 1024 + +#define ARCH_COMMAND_LINE_SIZE 896 + +#ifdef __KERNEL__ + +#include + +#define PARMAREA 0x10400 +#define MEMORY_CHUNKS 256 + +#ifndef __ASSEMBLY__ + +#ifndef __s390x__ +#define IPL_DEVICE (*(unsigned long *) (0x10404)) +#define INITRD_START (*(unsigned long *) (0x1040C)) +#define INITRD_SIZE (*(unsigned long *) (0x10414)) +#else /* __s390x__ */ +#define IPL_DEVICE (*(unsigned long *) (0x10400)) +#define INITRD_START (*(unsigned long *) (0x10408)) +#define INITRD_SIZE (*(unsigned long *) (0x10410)) +#endif /* __s390x__ */ +#define COMMAND_LINE ((char *) (0x10480)) + +#define CHUNK_READ_WRITE 0 +#define CHUNK_READ_ONLY 1 + +struct mem_chunk { + unsigned long addr; + unsigned long size; + int type; +}; + +extern struct mem_chunk memory_chunk[]; +extern unsigned long real_memory_size; + +void detect_memory_layout(struct mem_chunk chunk[]); + +#ifdef CONFIG_S390_SWITCH_AMODE +extern unsigned int switch_amode; +#else +#define switch_amode (0) +#endif + +#ifdef CONFIG_S390_EXEC_PROTECT +extern unsigned int s390_noexec; +#else +#define s390_noexec (0) +#endif + +/* + * Machine features detected in head.S + */ +extern unsigned long machine_flags; + +#define MACHINE_FLAG_VM (1UL << 0) +#define MACHINE_FLAG_IEEE (1UL << 1) +#define MACHINE_FLAG_CSP (1UL << 3) +#define MACHINE_FLAG_MVPG (1UL << 4) +#define MACHINE_FLAG_DIAG44 (1UL << 5) +#define MACHINE_FLAG_IDTE (1UL << 6) +#define MACHINE_FLAG_DIAG9C (1UL << 7) +#define MACHINE_FLAG_MVCOS (1UL << 8) +#define MACHINE_FLAG_KVM (1UL << 9) +#define MACHINE_FLAG_HPAGE (1UL << 10) +#define MACHINE_FLAG_PFMF (1UL << 11) + +#define MACHINE_IS_VM (machine_flags & MACHINE_FLAG_VM) +#define MACHINE_IS_KVM (machine_flags & MACHINE_FLAG_KVM) +#define MACHINE_HAS_DIAG9C (machine_flags & MACHINE_FLAG_DIAG9C) + +#ifndef __s390x__ +#define MACHINE_HAS_IEEE (machine_flags & MACHINE_FLAG_IEEE) +#define MACHINE_HAS_CSP (machine_flags & MACHINE_FLAG_CSP) +#define MACHINE_HAS_IDTE (0) +#define MACHINE_HAS_DIAG44 (1) +#define MACHINE_HAS_MVPG (machine_flags & MACHINE_FLAG_MVPG) +#define MACHINE_HAS_MVCOS (0) +#define MACHINE_HAS_HPAGE (0) +#define MACHINE_HAS_PFMF (0) +#else /* __s390x__ */ +#define MACHINE_HAS_IEEE (1) +#define MACHINE_HAS_CSP (1) +#define MACHINE_HAS_IDTE (machine_flags & MACHINE_FLAG_IDTE) +#define MACHINE_HAS_DIAG44 (machine_flags & MACHINE_FLAG_DIAG44) +#define MACHINE_HAS_MVPG (1) +#define MACHINE_HAS_MVCOS (machine_flags & MACHINE_FLAG_MVCOS) +#define MACHINE_HAS_HPAGE (machine_flags & MACHINE_FLAG_HPAGE) +#define MACHINE_HAS_PFMF (machine_flags & MACHINE_FLAG_PFMF) +#endif /* __s390x__ */ + +#define ZFCPDUMP_HSA_SIZE (32UL<<20) + +/* + * Console mode. Override with conmode= + */ +extern unsigned int console_mode; +extern unsigned int console_devno; +extern unsigned int console_irq; + +extern char vmhalt_cmd[]; +extern char vmpoff_cmd[]; + +#define CONSOLE_IS_UNDEFINED (console_mode == 0) +#define CONSOLE_IS_SCLP (console_mode == 1) +#define CONSOLE_IS_3215 (console_mode == 2) +#define CONSOLE_IS_3270 (console_mode == 3) +#define SET_CONSOLE_SCLP do { console_mode = 1; } while (0) +#define SET_CONSOLE_3215 do { console_mode = 2; } while (0) +#define SET_CONSOLE_3270 do { console_mode = 3; } while (0) + +#define NSS_NAME_SIZE 8 +extern char kernel_nss_name[]; + +#else /* __ASSEMBLY__ */ + +#ifndef __s390x__ +#define IPL_DEVICE 0x10404 +#define INITRD_START 0x1040C +#define INITRD_SIZE 0x10414 +#else /* __s390x__ */ +#define IPL_DEVICE 0x10400 +#define INITRD_START 0x10408 +#define INITRD_SIZE 0x10410 +#endif /* __s390x__ */ +#define COMMAND_LINE 0x10480 + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_S390_SETUP_H */ diff --git a/arch/s390/include/asm/sfp-machine.h b/arch/s390/include/asm/sfp-machine.h new file mode 100644 index 000000000000..4e16aede4b06 --- /dev/null +++ b/arch/s390/include/asm/sfp-machine.h @@ -0,0 +1,142 @@ +/* Machine-dependent software floating-point definitions. + S/390 kernel version. + Copyright (C) 1997,1998,1999 Free Software Foundation, Inc. + This file is part of the GNU C Library. + Contributed by Richard Henderson (rth@cygnus.com), + Jakub Jelinek (jj@ultra.linux.cz), + David S. Miller (davem@redhat.com) and + Peter Maydell (pmaydell@chiark.greenend.org.uk). + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If + not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef _SFP_MACHINE_H +#define _SFP_MACHINE_H + + +#define _FP_W_TYPE_SIZE 32 +#define _FP_W_TYPE unsigned int +#define _FP_WS_TYPE signed int +#define _FP_I_TYPE int + +#define _FP_MUL_MEAT_S(R,X,Y) \ + _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_D(R,X,Y) \ + _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_Q(R,X,Y) \ + _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm) + +#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y) +#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y) +#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y) + +#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1) +#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1 +#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1 +#define _FP_NANSIGN_S 0 +#define _FP_NANSIGN_D 0 +#define _FP_NANSIGN_Q 0 + +#define _FP_KEEPNANFRACP 1 + +/* + * If one NaN is signaling and the other is not, + * we choose that one, otherwise we choose X. + */ +#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \ + do { \ + if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs) \ + && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)) \ + { \ + R##_s = Y##_s; \ + _FP_FRAC_COPY_##wc(R,Y); \ + } \ + else \ + { \ + R##_s = X##_s; \ + _FP_FRAC_COPY_##wc(R,X); \ + } \ + R##_c = FP_CLS_NAN; \ + } while (0) + +/* Some assembly to speed things up. */ +#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) ({ \ + unsigned int __r2 = (x2) + (y2); \ + unsigned int __r1 = (x1); \ + unsigned int __r0 = (x0); \ + asm volatile( \ + " alr %2,%3\n" \ + " brc 12,0f\n" \ + " lhi 0,1\n" \ + " alr %1,0\n" \ + " brc 12,0f\n" \ + " alr %0,0\n" \ + "0:" \ + : "+&d" (__r2), "+&d" (__r1), "+&d" (__r0) \ + : "d" (y0), "i" (1) : "cc", "0" ); \ + asm volatile( \ + " alr %1,%2\n" \ + " brc 12,0f\n" \ + " ahi %0,1\n" \ + "0:" \ + : "+&d" (__r2), "+&d" (__r1) \ + : "d" (y1) : "cc"); \ + (r2) = __r2; \ + (r1) = __r1; \ + (r0) = __r0; \ +}) + +#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) ({ \ + unsigned int __r2 = (x2) - (y2); \ + unsigned int __r1 = (x1); \ + unsigned int __r0 = (x0); \ + asm volatile( \ + " slr %2,%3\n" \ + " brc 3,0f\n" \ + " lhi 0,1\n" \ + " slr %1,0\n" \ + " brc 3,0f\n" \ + " slr %0,0\n" \ + "0:" \ + : "+&d" (__r2), "+&d" (__r1), "+&d" (__r0) \ + : "d" (y0) : "cc", "0"); \ + asm volatile( \ + " slr %1,%2\n" \ + " brc 3,0f\n" \ + " ahi %0,-1\n" \ + "0:" \ + : "+&d" (__r2), "+&d" (__r1) \ + : "d" (y1) : "cc"); \ + (r2) = __r2; \ + (r1) = __r1; \ + (r0) = __r0; \ +}) + +#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0) + +/* Obtain the current rounding mode. */ +#define FP_ROUNDMODE mode + +/* Exception flags. */ +#define FP_EX_INVALID 0x800000 +#define FP_EX_DIVZERO 0x400000 +#define FP_EX_OVERFLOW 0x200000 +#define FP_EX_UNDERFLOW 0x100000 +#define FP_EX_INEXACT 0x080000 + +/* We write the results always */ +#define FP_INHIBIT_RESULTS 0 + +#endif diff --git a/arch/s390/include/asm/sfp-util.h b/arch/s390/include/asm/sfp-util.h new file mode 100644 index 000000000000..0addc6466d95 --- /dev/null +++ b/arch/s390/include/asm/sfp-util.h @@ -0,0 +1,77 @@ +#include +#include +#include +#include + +#define add_ssaaaa(sh, sl, ah, al, bh, bl) ({ \ + unsigned int __sh = (ah); \ + unsigned int __sl = (al); \ + asm volatile( \ + " alr %1,%3\n" \ + " brc 12,0f\n" \ + " ahi %0,1\n" \ + "0: alr %0,%2" \ + : "+&d" (__sh), "+d" (__sl) \ + : "d" (bh), "d" (bl) : "cc"); \ + (sh) = __sh; \ + (sl) = __sl; \ +}) + +#define sub_ddmmss(sh, sl, ah, al, bh, bl) ({ \ + unsigned int __sh = (ah); \ + unsigned int __sl = (al); \ + asm volatile( \ + " slr %1,%3\n" \ + " brc 3,0f\n" \ + " ahi %0,-1\n" \ + "0: slr %0,%2" \ + : "+&d" (__sh), "+d" (__sl) \ + : "d" (bh), "d" (bl) : "cc"); \ + (sh) = __sh; \ + (sl) = __sl; \ +}) + +/* a umul b = a mul b + (a>=2<<31) ? b<<32:0 + (b>=2<<31) ? a<<32:0 */ +#define umul_ppmm(wh, wl, u, v) ({ \ + unsigned int __wh = u; \ + unsigned int __wl = v; \ + asm volatile( \ + " ltr 1,%0\n" \ + " mr 0,%1\n" \ + " jnm 0f\n" \ + " alr 0,%1\n" \ + "0: ltr %1,%1\n" \ + " jnm 1f\n" \ + " alr 0,%0\n" \ + "1: lr %0,0\n" \ + " lr %1,1\n" \ + : "+d" (__wh), "+d" (__wl) \ + : : "0", "1", "cc"); \ + wh = __wh; \ + wl = __wl; \ +}) + +#ifdef __s390x__ +#define udiv_qrnnd(q, r, n1, n0, d) \ + do { unsigned long __n; \ + unsigned int __r, __d; \ + __n = ((unsigned long)(n1) << 32) + n0; \ + __d = (d); \ + (q) = __n / __d; \ + (r) = __n % __d; \ + } while (0) +#else +#define udiv_qrnnd(q, r, n1, n0, d) \ + do { unsigned int __r; \ + (q) = __udiv_qrnnd (&__r, (n1), (n0), (d)); \ + (r) = __r; \ + } while (0) +extern unsigned long __udiv_qrnnd (unsigned int *, unsigned int, + unsigned int , unsigned int); +#endif + +#define UDIV_NEEDS_NORMALIZATION 0 + +#define abort() return 0 + +#define __BYTE_ORDER __BIG_ENDIAN diff --git a/arch/s390/include/asm/shmbuf.h b/arch/s390/include/asm/shmbuf.h new file mode 100644 index 000000000000..eed2e280ce37 --- /dev/null +++ b/arch/s390/include/asm/shmbuf.h @@ -0,0 +1,48 @@ +#ifndef _S390_SHMBUF_H +#define _S390_SHMBUF_H + +/* + * The shmid64_ds structure for S/390 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem (for !__s390x__) + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ +#ifndef __s390x__ + unsigned long __unused1; +#endif /* ! __s390x__ */ + __kernel_time_t shm_dtime; /* last detach time */ +#ifndef __s390x__ + unsigned long __unused2; +#endif /* ! __s390x__ */ + __kernel_time_t shm_ctime; /* last change time */ +#ifndef __s390x__ + unsigned long __unused3; +#endif /* ! __s390x__ */ + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _S390_SHMBUF_H */ diff --git a/arch/s390/include/asm/shmparam.h b/arch/s390/include/asm/shmparam.h new file mode 100644 index 000000000000..c2e0c0508e73 --- /dev/null +++ b/arch/s390/include/asm/shmparam.h @@ -0,0 +1,13 @@ +/* + * include/asm-s390/shmparam.h + * + * S390 version + * + * Derived from "include/asm-i386/shmparam.h" + */ +#ifndef _ASM_S390_SHMPARAM_H +#define _ASM_S390_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASM_S390_SHMPARAM_H */ diff --git a/arch/s390/include/asm/sigcontext.h b/arch/s390/include/asm/sigcontext.h new file mode 100644 index 000000000000..aeb6e0b13329 --- /dev/null +++ b/arch/s390/include/asm/sigcontext.h @@ -0,0 +1,71 @@ +/* + * include/asm-s390/sigcontext.h + * + * S390 version + * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation + */ + +#ifndef _ASM_S390_SIGCONTEXT_H +#define _ASM_S390_SIGCONTEXT_H + +#include + +#define __NUM_GPRS 16 +#define __NUM_FPRS 16 +#define __NUM_ACRS 16 + +#ifndef __s390x__ + +/* Has to be at least _NSIG_WORDS from asm/signal.h */ +#define _SIGCONTEXT_NSIG 64 +#define _SIGCONTEXT_NSIG_BPW 32 +/* Size of stack frame allocated when calling signal handler. */ +#define __SIGNAL_FRAMESIZE 96 + +#else /* __s390x__ */ + +/* Has to be at least _NSIG_WORDS from asm/signal.h */ +#define _SIGCONTEXT_NSIG 64 +#define _SIGCONTEXT_NSIG_BPW 64 +/* Size of stack frame allocated when calling signal handler. */ +#define __SIGNAL_FRAMESIZE 160 + +#endif /* __s390x__ */ + +#define _SIGCONTEXT_NSIG_WORDS (_SIGCONTEXT_NSIG / _SIGCONTEXT_NSIG_BPW) +#define _SIGMASK_COPY_SIZE (sizeof(unsigned long)*_SIGCONTEXT_NSIG_WORDS) + +typedef struct +{ + unsigned long mask; + unsigned long addr; +} __attribute__ ((aligned(8))) _psw_t; + +typedef struct +{ + _psw_t psw; + unsigned long gprs[__NUM_GPRS]; + unsigned int acrs[__NUM_ACRS]; +} _s390_regs_common; + +typedef struct +{ + unsigned int fpc; + double fprs[__NUM_FPRS]; +} _s390_fp_regs; + +typedef struct +{ + _s390_regs_common regs; + _s390_fp_regs fpregs; +} _sigregs; + +struct sigcontext +{ + unsigned long oldmask[_SIGCONTEXT_NSIG_WORDS]; + _sigregs __user *sregs; +}; + + +#endif + diff --git a/arch/s390/include/asm/siginfo.h b/arch/s390/include/asm/siginfo.h new file mode 100644 index 000000000000..e0ff1ab054be --- /dev/null +++ b/arch/s390/include/asm/siginfo.h @@ -0,0 +1,18 @@ +/* + * include/asm-s390/siginfo.h + * + * S390 version + * + * Derived from "include/asm-i386/siginfo.h" + */ + +#ifndef _S390_SIGINFO_H +#define _S390_SIGINFO_H + +#ifdef __s390x__ +#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) +#endif + +#include + +#endif diff --git a/arch/s390/include/asm/signal.h b/arch/s390/include/asm/signal.h new file mode 100644 index 000000000000..f6cfddb278cb --- /dev/null +++ b/arch/s390/include/asm/signal.h @@ -0,0 +1,172 @@ +/* + * include/asm-s390/signal.h + * + * S390 version + * + * Derived from "include/asm-i386/signal.h" + */ + +#ifndef _ASMS390_SIGNAL_H +#define _ASMS390_SIGNAL_H + +#include +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; +struct pt_regs; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ +#include +#define _NSIG _SIGCONTEXT_NSIG +#define _NSIG_BPW _SIGCONTEXT_NSIG_BPW +#define _NSIG_WORDS _SIGCONTEXT_NSIG_WORDS + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; +#ifndef __s390x__ /* lovely */ + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +#else /* __s390x__ */ + unsigned long sa_flags; + void (*sa_restorer)(void); + sigset_t sa_mask; +#endif /* __s390x__ */ +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + + +#endif diff --git a/arch/s390/include/asm/sigp.h b/arch/s390/include/asm/sigp.h new file mode 100644 index 000000000000..e16d56f8dfe1 --- /dev/null +++ b/arch/s390/include/asm/sigp.h @@ -0,0 +1,126 @@ +/* + * include/asm-s390/sigp.h + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), + * Martin Schwidefsky (schwidefsky@de.ibm.com) + * Heiko Carstens (heiko.carstens@de.ibm.com) + * + * sigp.h by D.J. Barrow (c) IBM 1999 + * contains routines / structures for signalling other S/390 processors in an + * SMP configuration. + */ + +#ifndef __SIGP__ +#define __SIGP__ + +#include +#include + +/* get real cpu address from logical cpu number */ +extern volatile int __cpu_logical_map[]; + +typedef enum +{ + sigp_unassigned=0x0, + sigp_sense, + sigp_external_call, + sigp_emergency_signal, + sigp_start, + sigp_stop, + sigp_restart, + sigp_unassigned1, + sigp_unassigned2, + sigp_stop_and_store_status, + sigp_unassigned3, + sigp_initial_cpu_reset, + sigp_cpu_reset, + sigp_set_prefix, + sigp_store_status_at_address, + sigp_store_extended_status_at_address +} sigp_order_code; + +typedef __u32 sigp_status_word; + +typedef enum +{ + sigp_order_code_accepted=0, + sigp_status_stored, + sigp_busy, + sigp_not_operational +} sigp_ccode; + + +/* + * Definitions for the external call + */ + +/* 'Bit' signals, asynchronous */ +typedef enum +{ + ec_schedule=0, + ec_call_function, + ec_bit_last +} ec_bit_sig; + +/* + * Signal processor + */ +static inline sigp_ccode +signal_processor(__u16 cpu_addr, sigp_order_code order_code) +{ + register unsigned long reg1 asm ("1") = 0; + sigp_ccode ccode; + + asm volatile( + " sigp %1,%2,0(%3)\n" + " ipm %0\n" + " srl %0,28\n" + : "=d" (ccode) + : "d" (reg1), "d" (__cpu_logical_map[cpu_addr]), + "a" (order_code) : "cc" , "memory"); + return ccode; +} + +/* + * Signal processor with parameter + */ +static inline sigp_ccode +signal_processor_p(__u32 parameter, __u16 cpu_addr, sigp_order_code order_code) +{ + register unsigned int reg1 asm ("1") = parameter; + sigp_ccode ccode; + + asm volatile( + " sigp %1,%2,0(%3)\n" + " ipm %0\n" + " srl %0,28\n" + : "=d" (ccode) + : "d" (reg1), "d" (__cpu_logical_map[cpu_addr]), + "a" (order_code) : "cc" , "memory"); + return ccode; +} + +/* + * Signal processor with parameter and return status + */ +static inline sigp_ccode +signal_processor_ps(__u32 *statusptr, __u32 parameter, __u16 cpu_addr, + sigp_order_code order_code) +{ + register unsigned int reg1 asm ("1") = parameter; + sigp_ccode ccode; + + asm volatile( + " sigp %1,%2,0(%3)\n" + " ipm %0\n" + " srl %0,28\n" + : "=d" (ccode), "+d" (reg1) + : "d" (__cpu_logical_map[cpu_addr]), "a" (order_code) + : "cc" , "memory"); + *statusptr = reg1; + return ccode; +} + +#endif /* __SIGP__ */ diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h new file mode 100644 index 000000000000..ae89cf2478fc --- /dev/null +++ b/arch/s390/include/asm/smp.h @@ -0,0 +1,116 @@ +/* + * include/asm-s390/smp.h + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), + * Martin Schwidefsky (schwidefsky@de.ibm.com) + * Heiko Carstens (heiko.carstens@de.ibm.com) + */ +#ifndef __ASM_SMP_H +#define __ASM_SMP_H + +#include +#include +#include + +#if defined(__KERNEL__) && defined(CONFIG_SMP) && !defined(__ASSEMBLY__) + +#include +#include +#include +#include + +/* + s390 specific smp.c headers + */ +typedef struct +{ + int intresting; + sigp_ccode ccode; + __u32 status; + __u16 cpu; +} sigp_info; + +extern void machine_restart_smp(char *); +extern void machine_halt_smp(void); +extern void machine_power_off_smp(void); + +#define NO_PROC_ID 0xFF /* No processor magic marker */ + +/* + * This magic constant controls our willingness to transfer + * a process across CPUs. Such a transfer incurs misses on the L1 + * cache, and on a P6 or P5 with multiple L2 caches L2 hits. My + * gut feeling is this will vary by board in value. For a board + * with separate L2 cache it probably depends also on the RSS, and + * for a board with shared L2 cache it ought to decay fast as other + * processes are run. + */ + +#define PROC_CHANGE_PENALTY 20 /* Schedule penalty */ + +#define raw_smp_processor_id() (S390_lowcore.cpu_data.cpu_nr) + +static inline __u16 hard_smp_processor_id(void) +{ + return stap(); +} + +/* + * returns 1 if cpu is in stopped/check stopped state or not operational + * returns 0 otherwise + */ +static inline int +smp_cpu_not_running(int cpu) +{ + __u32 status; + + switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) { + case sigp_order_code_accepted: + case sigp_status_stored: + /* Check for stopped and check stop state */ + if (status & 0x50) + return 1; + break; + case sigp_not_operational: + return 1; + default: + break; + } + return 0; +} + +#define cpu_logical_map(cpu) (cpu) + +extern int __cpu_disable (void); +extern void __cpu_die (unsigned int cpu); +extern void cpu_die (void) __attribute__ ((noreturn)); +extern int __cpu_up (unsigned int cpu); + +extern struct mutex smp_cpu_state_mutex; +extern int smp_cpu_polarization[]; + +extern int smp_call_function_mask(cpumask_t mask, void (*func)(void *), + void *info, int wait); +#endif + +#ifndef CONFIG_SMP +static inline void smp_send_stop(void) +{ + /* Disable all interrupts/machine checks */ + __load_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK); +} + +#define hard_smp_processor_id() 0 +#define smp_cpu_not_running(cpu) 1 +#endif + +#ifdef CONFIG_HOTPLUG_CPU +extern int smp_rescan_cpus(void); +#else +static inline int smp_rescan_cpus(void) { return 0; } +#endif + +extern union save_area *zfcpdump_save_areas[NR_CPUS + 1]; +#endif diff --git a/arch/s390/include/asm/socket.h b/arch/s390/include/asm/socket.h new file mode 100644 index 000000000000..c786ab623b2d --- /dev/null +++ b/arch/s390/include/asm/socket.h @@ -0,0 +1,65 @@ +/* + * include/asm-s390/socket.h + * + * S390 version + * + * Derived from "include/asm-i386/socket.h" + */ + +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#endif /* _ASM_SOCKET_H */ diff --git a/arch/s390/include/asm/sockios.h b/arch/s390/include/asm/sockios.h new file mode 100644 index 000000000000..f4fc16c7da59 --- /dev/null +++ b/arch/s390/include/asm/sockios.h @@ -0,0 +1,21 @@ +/* + * include/asm-s390/sockios.h + * + * S390 version + * + * Derived from "include/asm-i386/sockios.h" + */ + +#ifndef __ARCH_S390_SOCKIOS__ +#define __ARCH_S390_SOCKIOS__ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif diff --git a/arch/s390/include/asm/sparsemem.h b/arch/s390/include/asm/sparsemem.h new file mode 100644 index 000000000000..545d219e6a2d --- /dev/null +++ b/arch/s390/include/asm/sparsemem.h @@ -0,0 +1,18 @@ +#ifndef _ASM_S390_SPARSEMEM_H +#define _ASM_S390_SPARSEMEM_H + +#ifdef CONFIG_64BIT + +#define SECTION_SIZE_BITS 28 +#define MAX_PHYSADDR_BITS 42 +#define MAX_PHYSMEM_BITS 42 + +#else + +#define SECTION_SIZE_BITS 25 +#define MAX_PHYSADDR_BITS 31 +#define MAX_PHYSMEM_BITS 31 + +#endif /* CONFIG_64BIT */ + +#endif /* _ASM_S390_SPARSEMEM_H */ diff --git a/arch/s390/include/asm/spinlock.h b/arch/s390/include/asm/spinlock.h new file mode 100644 index 000000000000..df84ae96915f --- /dev/null +++ b/arch/s390/include/asm/spinlock.h @@ -0,0 +1,178 @@ +/* + * include/asm-s390/spinlock.h + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) + * + * Derived from "include/asm-i386/spinlock.h" + */ + +#ifndef __ASM_SPINLOCK_H +#define __ASM_SPINLOCK_H + +#include + +#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) + +static inline int +_raw_compare_and_swap(volatile unsigned int *lock, + unsigned int old, unsigned int new) +{ + asm volatile( + " cs %0,%3,%1" + : "=d" (old), "=Q" (*lock) + : "0" (old), "d" (new), "Q" (*lock) + : "cc", "memory" ); + return old; +} + +#else /* __GNUC__ */ + +static inline int +_raw_compare_and_swap(volatile unsigned int *lock, + unsigned int old, unsigned int new) +{ + asm volatile( + " cs %0,%3,0(%4)" + : "=d" (old), "=m" (*lock) + : "0" (old), "d" (new), "a" (lock), "m" (*lock) + : "cc", "memory" ); + return old; +} + +#endif /* __GNUC__ */ + +/* + * Simple spin lock operations. There are two variants, one clears IRQ's + * on the local processor, one does not. + * + * We make no fairness assumptions. They have a cost. + * + * (the type definitions are in asm/spinlock_types.h) + */ + +#define __raw_spin_is_locked(x) ((x)->owner_cpu != 0) +#define __raw_spin_unlock_wait(lock) \ + do { while (__raw_spin_is_locked(lock)) \ + _raw_spin_relax(lock); } while (0) + +extern void _raw_spin_lock_wait(raw_spinlock_t *); +extern void _raw_spin_lock_wait_flags(raw_spinlock_t *, unsigned long flags); +extern int _raw_spin_trylock_retry(raw_spinlock_t *); +extern void _raw_spin_relax(raw_spinlock_t *lock); + +static inline void __raw_spin_lock(raw_spinlock_t *lp) +{ + int old; + + old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id()); + if (likely(old == 0)) + return; + _raw_spin_lock_wait(lp); +} + +static inline void __raw_spin_lock_flags(raw_spinlock_t *lp, + unsigned long flags) +{ + int old; + + old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id()); + if (likely(old == 0)) + return; + _raw_spin_lock_wait_flags(lp, flags); +} + +static inline int __raw_spin_trylock(raw_spinlock_t *lp) +{ + int old; + + old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id()); + if (likely(old == 0)) + return 1; + return _raw_spin_trylock_retry(lp); +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lp) +{ + _raw_compare_and_swap(&lp->owner_cpu, lp->owner_cpu, 0); +} + +/* + * Read-write spinlocks, allowing multiple readers + * but only one writer. + * + * NOTE! it is quite common to have readers in interrupts + * but no interrupt writers. For those circumstances we + * can "mix" irq-safe locks - any writer needs to get a + * irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + */ + +/** + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_read_can_lock(x) ((int)(x)->lock >= 0) + +/** + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_write_can_lock(x) ((x)->lock == 0) + +extern void _raw_read_lock_wait(raw_rwlock_t *lp); +extern int _raw_read_trylock_retry(raw_rwlock_t *lp); +extern void _raw_write_lock_wait(raw_rwlock_t *lp); +extern int _raw_write_trylock_retry(raw_rwlock_t *lp); + +static inline void __raw_read_lock(raw_rwlock_t *rw) +{ + unsigned int old; + old = rw->lock & 0x7fffffffU; + if (_raw_compare_and_swap(&rw->lock, old, old + 1) != old) + _raw_read_lock_wait(rw); +} + +static inline void __raw_read_unlock(raw_rwlock_t *rw) +{ + unsigned int old, cmp; + + old = rw->lock; + do { + cmp = old; + old = _raw_compare_and_swap(&rw->lock, old, old - 1); + } while (cmp != old); +} + +static inline void __raw_write_lock(raw_rwlock_t *rw) +{ + if (unlikely(_raw_compare_and_swap(&rw->lock, 0, 0x80000000) != 0)) + _raw_write_lock_wait(rw); +} + +static inline void __raw_write_unlock(raw_rwlock_t *rw) +{ + _raw_compare_and_swap(&rw->lock, 0x80000000, 0); +} + +static inline int __raw_read_trylock(raw_rwlock_t *rw) +{ + unsigned int old; + old = rw->lock & 0x7fffffffU; + if (likely(_raw_compare_and_swap(&rw->lock, old, old + 1) == old)) + return 1; + return _raw_read_trylock_retry(rw); +} + +static inline int __raw_write_trylock(raw_rwlock_t *rw) +{ + if (likely(_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0)) + return 1; + return _raw_write_trylock_retry(rw); +} + +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* __ASM_SPINLOCK_H */ diff --git a/arch/s390/include/asm/spinlock_types.h b/arch/s390/include/asm/spinlock_types.h new file mode 100644 index 000000000000..654abc40de04 --- /dev/null +++ b/arch/s390/include/asm/spinlock_types.h @@ -0,0 +1,20 @@ +#ifndef __ASM_SPINLOCK_TYPES_H +#define __ASM_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct { + volatile unsigned int owner_cpu; +} __attribute__ ((aligned (4))) raw_spinlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 0 } + +typedef struct { + volatile unsigned int lock; +} raw_rwlock_t; + +#define __RAW_RW_LOCK_UNLOCKED { 0 } + +#endif diff --git a/arch/s390/include/asm/stat.h b/arch/s390/include/asm/stat.h new file mode 100644 index 000000000000..d92959eebb65 --- /dev/null +++ b/arch/s390/include/asm/stat.h @@ -0,0 +1,105 @@ +/* + * include/asm-s390/stat.h + * + * S390 version + * + * Derived from "include/asm-i386/stat.h" + */ + +#ifndef _S390_STAT_H +#define _S390_STAT_H + +#ifndef __s390x__ +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned int __pad1; +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + unsigned int st_mode; + unsigned int st_nlink; + unsigned long st_uid; + unsigned long st_gid; + unsigned long long st_rdev; + unsigned int __pad3; + long long st_size; + unsigned long st_blksize; + unsigned char __pad4[4]; + unsigned long __pad5; /* future possible st_blocks high bits */ + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ + unsigned long long st_ino; +}; + +#else /* __s390x__ */ + +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned long st_nlink; + unsigned int st_mode; + unsigned int st_uid; + unsigned int st_gid; + unsigned int __pad1; + unsigned long st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long st_blksize; + long st_blocks; + unsigned long __unused[3]; +}; + +#endif /* __s390x__ */ + +#define STAT_HAVE_NSEC 1 + +#endif diff --git a/arch/s390/include/asm/statfs.h b/arch/s390/include/asm/statfs.h new file mode 100644 index 000000000000..099a45579190 --- /dev/null +++ b/arch/s390/include/asm/statfs.h @@ -0,0 +1,71 @@ +/* + * include/asm-s390/statfs.h + * + * S390 version + * + * Derived from "include/asm-i386/statfs.h" + */ + +#ifndef _S390_STATFS_H +#define _S390_STATFS_H + +#ifndef __s390x__ +#include +#else + +#ifndef __KERNEL_STRICT_NAMES + +#include + +typedef __kernel_fsid_t fsid_t; + +#endif + +/* + * This is ugly -- we're already 64-bit clean, so just duplicate the + * definitions. + */ +struct statfs { + int f_type; + int f_bsize; + long f_blocks; + long f_bfree; + long f_bavail; + long f_files; + long f_ffree; + __kernel_fsid_t f_fsid; + int f_namelen; + int f_frsize; + int f_spare[5]; +}; + +struct statfs64 { + int f_type; + int f_bsize; + long f_blocks; + long f_bfree; + long f_bavail; + long f_files; + long f_ffree; + __kernel_fsid_t f_fsid; + int f_namelen; + int f_frsize; + int f_spare[5]; +}; + +struct compat_statfs64 { + __u32 f_type; + __u32 f_bsize; + __u64 f_blocks; + __u64 f_bfree; + __u64 f_bavail; + __u64 f_files; + __u64 f_ffree; + __kernel_fsid_t f_fsid; + __u32 f_namelen; + __u32 f_frsize; + __u32 f_spare[5]; +}; + +#endif /* __s390x__ */ +#endif diff --git a/arch/s390/include/asm/string.h b/arch/s390/include/asm/string.h new file mode 100644 index 000000000000..d074673a6d9b --- /dev/null +++ b/arch/s390/include/asm/string.h @@ -0,0 +1,143 @@ +/* + * include/asm-s390/string.h + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), + */ + +#ifndef _S390_STRING_H_ +#define _S390_STRING_H_ + +#ifdef __KERNEL__ + +#ifndef _LINUX_TYPES_H +#include +#endif + +#define __HAVE_ARCH_MEMCHR /* inline & arch function */ +#define __HAVE_ARCH_MEMCMP /* arch function */ +#define __HAVE_ARCH_MEMCPY /* gcc builtin & arch function */ +#define __HAVE_ARCH_MEMSCAN /* inline & arch function */ +#define __HAVE_ARCH_MEMSET /* gcc builtin & arch function */ +#define __HAVE_ARCH_STRCAT /* inline & arch function */ +#define __HAVE_ARCH_STRCMP /* arch function */ +#define __HAVE_ARCH_STRCPY /* inline & arch function */ +#define __HAVE_ARCH_STRLCAT /* arch function */ +#define __HAVE_ARCH_STRLCPY /* arch function */ +#define __HAVE_ARCH_STRLEN /* inline & arch function */ +#define __HAVE_ARCH_STRNCAT /* arch function */ +#define __HAVE_ARCH_STRNCPY /* arch function */ +#define __HAVE_ARCH_STRNLEN /* inline & arch function */ +#define __HAVE_ARCH_STRRCHR /* arch function */ +#define __HAVE_ARCH_STRSTR /* arch function */ + +/* Prototypes for non-inlined arch strings functions. */ +extern int memcmp(const void *, const void *, size_t); +extern void *memcpy(void *, const void *, size_t); +extern void *memset(void *, int, size_t); +extern int strcmp(const char *,const char *); +extern size_t strlcat(char *, const char *, size_t); +extern size_t strlcpy(char *, const char *, size_t); +extern char *strncat(char *, const char *, size_t); +extern char *strncpy(char *, const char *, size_t); +extern char *strrchr(const char *, int); +extern char *strstr(const char *, const char *); + +#undef __HAVE_ARCH_MEMMOVE +#undef __HAVE_ARCH_STRCHR +#undef __HAVE_ARCH_STRNCHR +#undef __HAVE_ARCH_STRNCMP +#undef __HAVE_ARCH_STRNICMP +#undef __HAVE_ARCH_STRPBRK +#undef __HAVE_ARCH_STRSEP +#undef __HAVE_ARCH_STRSPN + +#if !defined(IN_ARCH_STRING_C) + +static inline void *memchr(const void * s, int c, size_t n) +{ + register int r0 asm("0") = (char) c; + const void *ret = s + n; + + asm volatile( + "0: srst %0,%1\n" + " jo 0b\n" + " jl 1f\n" + " la %0,0\n" + "1:" + : "+a" (ret), "+&a" (s) : "d" (r0) : "cc"); + return (void *) ret; +} + +static inline void *memscan(void *s, int c, size_t n) +{ + register int r0 asm("0") = (char) c; + const void *ret = s + n; + + asm volatile( + "0: srst %0,%1\n" + " jo 0b\n" + : "+a" (ret), "+&a" (s) : "d" (r0) : "cc"); + return (void *) ret; +} + +static inline char *strcat(char *dst, const char *src) +{ + register int r0 asm("0") = 0; + unsigned long dummy; + char *ret = dst; + + asm volatile( + "0: srst %0,%1\n" + " jo 0b\n" + "1: mvst %0,%2\n" + " jo 1b" + : "=&a" (dummy), "+a" (dst), "+a" (src) + : "d" (r0), "0" (0) : "cc", "memory" ); + return ret; +} + +static inline char *strcpy(char *dst, const char *src) +{ + register int r0 asm("0") = 0; + char *ret = dst; + + asm volatile( + "0: mvst %0,%1\n" + " jo 0b" + : "+&a" (dst), "+&a" (src) : "d" (r0) + : "cc", "memory"); + return ret; +} + +static inline size_t strlen(const char *s) +{ + register unsigned long r0 asm("0") = 0; + const char *tmp = s; + + asm volatile( + "0: srst %0,%1\n" + " jo 0b" + : "+d" (r0), "+a" (tmp) : : "cc"); + return r0 - (unsigned long) s; +} + +static inline size_t strnlen(const char * s, size_t n) +{ + register int r0 asm("0") = 0; + const char *tmp = s; + const char *end = s + n; + + asm volatile( + "0: srst %0,%1\n" + " jo 0b" + : "+a" (end), "+a" (tmp) : "d" (r0) : "cc"); + return end - s; +} + +#endif /* !IN_ARCH_STRING_C */ + +#endif /* __KERNEL__ */ + +#endif /* __S390_STRING_H_ */ diff --git a/arch/s390/include/asm/suspend.h b/arch/s390/include/asm/suspend.h new file mode 100644 index 000000000000..1f34580e67a7 --- /dev/null +++ b/arch/s390/include/asm/suspend.h @@ -0,0 +1,5 @@ +#ifndef __ASM_S390_SUSPEND_H +#define __ASM_S390_SUSPEND_H + +#endif + diff --git a/arch/s390/include/asm/sysinfo.h b/arch/s390/include/asm/sysinfo.h new file mode 100644 index 000000000000..79d01343f8b0 --- /dev/null +++ b/arch/s390/include/asm/sysinfo.h @@ -0,0 +1,121 @@ +/* + * definition for store system information stsi + * + * Copyright IBM Corp. 2001,2008 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (version 2 only) + * as published by the Free Software Foundation. + * + * Author(s): Ulrich Weigand + * Christian Borntraeger + */ + +#ifndef __ASM_S390_SYSINFO_H +#define __ASM_S390_SYSINFO_H + +struct sysinfo_1_1_1 { + char reserved_0[32]; + char manufacturer[16]; + char type[4]; + char reserved_1[12]; + char model_capacity[16]; + char sequence[16]; + char plant[4]; + char model[16]; + char model_perm_cap[16]; + char model_temp_cap[16]; + char model_cap_rating[4]; + char model_perm_cap_rating[4]; + char model_temp_cap_rating[4]; +}; + +struct sysinfo_1_2_1 { + char reserved_0[80]; + char sequence[16]; + char plant[4]; + char reserved_1[2]; + unsigned short cpu_address; +}; + +struct sysinfo_1_2_2 { + char format; + char reserved_0[1]; + unsigned short acc_offset; + char reserved_1[24]; + unsigned int secondary_capability; + unsigned int capability; + unsigned short cpus_total; + unsigned short cpus_configured; + unsigned short cpus_standby; + unsigned short cpus_reserved; + unsigned short adjustment[0]; +}; + +struct sysinfo_1_2_2_extension { + unsigned int alt_capability; + unsigned short alt_adjustment[0]; +}; + +struct sysinfo_2_2_1 { + char reserved_0[80]; + char sequence[16]; + char plant[4]; + unsigned short cpu_id; + unsigned short cpu_address; +}; + +struct sysinfo_2_2_2 { + char reserved_0[32]; + unsigned short lpar_number; + char reserved_1; + unsigned char characteristics; + unsigned short cpus_total; + unsigned short cpus_configured; + unsigned short cpus_standby; + unsigned short cpus_reserved; + char name[8]; + unsigned int caf; + char reserved_2[16]; + unsigned short cpus_dedicated; + unsigned short cpus_shared; +}; + +#define LPAR_CHAR_DEDICATED (1 << 7) +#define LPAR_CHAR_SHARED (1 << 6) +#define LPAR_CHAR_LIMITED (1 << 5) + +struct sysinfo_3_2_2 { + char reserved_0[31]; + unsigned char count; + struct { + char reserved_0[4]; + unsigned short cpus_total; + unsigned short cpus_configured; + unsigned short cpus_standby; + unsigned short cpus_reserved; + char name[8]; + unsigned int caf; + char cpi[16]; + char reserved_1[24]; + + } vm[8]; +}; + +static inline int stsi(void *sysinfo, int fc, int sel1, int sel2) +{ + register int r0 asm("0") = (fc << 28) | sel1; + register int r1 asm("1") = sel2; + + asm volatile( + " stsi 0(%2)\n" + "0: jz 2f\n" + "1: lhi %0,%3\n" + "2:\n" + EX_TABLE(0b, 1b) + : "+d" (r0) : "d" (r1), "a" (sysinfo), "K" (-ENOSYS) + : "cc", "memory"); + return r0; +} + +#endif /* __ASM_S390_SYSINFO_H */ diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h new file mode 100644 index 000000000000..819e7d99ca0c --- /dev/null +++ b/arch/s390/include/asm/system.h @@ -0,0 +1,462 @@ +/* + * include/asm-s390/system.h + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), + * + * Derived from "include/asm-i386/system.h" + */ + +#ifndef __ASM_SYSTEM_H +#define __ASM_SYSTEM_H + +#include +#include +#include +#include +#include +#include + +#ifdef __KERNEL__ + +struct task_struct; + +extern struct task_struct *__switch_to(void *, void *); + +static inline void save_fp_regs(s390_fp_regs *fpregs) +{ + asm volatile( + " std 0,8(%1)\n" + " std 2,24(%1)\n" + " std 4,40(%1)\n" + " std 6,56(%1)" + : "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory"); + if (!MACHINE_HAS_IEEE) + return; + asm volatile( + " stfpc 0(%1)\n" + " std 1,16(%1)\n" + " std 3,32(%1)\n" + " std 5,48(%1)\n" + " std 7,64(%1)\n" + " std 8,72(%1)\n" + " std 9,80(%1)\n" + " std 10,88(%1)\n" + " std 11,96(%1)\n" + " std 12,104(%1)\n" + " std 13,112(%1)\n" + " std 14,120(%1)\n" + " std 15,128(%1)\n" + : "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory"); +} + +static inline void restore_fp_regs(s390_fp_regs *fpregs) +{ + asm volatile( + " ld 0,8(%0)\n" + " ld 2,24(%0)\n" + " ld 4,40(%0)\n" + " ld 6,56(%0)" + : : "a" (fpregs), "m" (*fpregs)); + if (!MACHINE_HAS_IEEE) + return; + asm volatile( + " lfpc 0(%0)\n" + " ld 1,16(%0)\n" + " ld 3,32(%0)\n" + " ld 5,48(%0)\n" + " ld 7,64(%0)\n" + " ld 8,72(%0)\n" + " ld 9,80(%0)\n" + " ld 10,88(%0)\n" + " ld 11,96(%0)\n" + " ld 12,104(%0)\n" + " ld 13,112(%0)\n" + " ld 14,120(%0)\n" + " ld 15,128(%0)\n" + : : "a" (fpregs), "m" (*fpregs)); +} + +static inline void save_access_regs(unsigned int *acrs) +{ + asm volatile("stam 0,15,0(%0)" : : "a" (acrs) : "memory"); +} + +static inline void restore_access_regs(unsigned int *acrs) +{ + asm volatile("lam 0,15,0(%0)" : : "a" (acrs)); +} + +#define switch_to(prev,next,last) do { \ + if (prev == next) \ + break; \ + save_fp_regs(&prev->thread.fp_regs); \ + restore_fp_regs(&next->thread.fp_regs); \ + save_access_regs(&prev->thread.acrs[0]); \ + restore_access_regs(&next->thread.acrs[0]); \ + prev = __switch_to(prev,next); \ +} while (0) + +#ifdef CONFIG_VIRT_CPU_ACCOUNTING +extern void account_vtime(struct task_struct *); +extern void account_tick_vtime(struct task_struct *); +extern void account_system_vtime(struct task_struct *); +#else +#define account_vtime(x) do { /* empty */ } while (0) +#endif + +#ifdef CONFIG_PFAULT +extern void pfault_irq_init(void); +extern int pfault_init(void); +extern void pfault_fini(void); +#else /* CONFIG_PFAULT */ +#define pfault_irq_init() do { } while (0) +#define pfault_init() ({-1;}) +#define pfault_fini() do { } while (0) +#endif /* CONFIG_PFAULT */ + +#ifdef CONFIG_PAGE_STATES +extern void cmma_init(void); +#else +static inline void cmma_init(void) { } +#endif + +#define finish_arch_switch(prev) do { \ + set_fs(current->thread.mm_segment); \ + account_vtime(prev); \ +} while (0) + +#define nop() asm volatile("nop") + +#define xchg(ptr,x) \ +({ \ + __typeof__(*(ptr)) __ret; \ + __ret = (__typeof__(*(ptr))) \ + __xchg((unsigned long)(x), (void *)(ptr),sizeof(*(ptr))); \ + __ret; \ +}) + +extern void __xchg_called_with_bad_pointer(void); + +static inline unsigned long __xchg(unsigned long x, void * ptr, int size) +{ + unsigned long addr, old; + int shift; + + switch (size) { + case 1: + addr = (unsigned long) ptr; + shift = (3 ^ (addr & 3)) << 3; + addr ^= addr & 3; + asm volatile( + " l %0,0(%4)\n" + "0: lr 0,%0\n" + " nr 0,%3\n" + " or 0,%2\n" + " cs %0,0,0(%4)\n" + " jl 0b\n" + : "=&d" (old), "=m" (*(int *) addr) + : "d" (x << shift), "d" (~(255 << shift)), "a" (addr), + "m" (*(int *) addr) : "memory", "cc", "0"); + return old >> shift; + case 2: + addr = (unsigned long) ptr; + shift = (2 ^ (addr & 2)) << 3; + addr ^= addr & 2; + asm volatile( + " l %0,0(%4)\n" + "0: lr 0,%0\n" + " nr 0,%3\n" + " or 0,%2\n" + " cs %0,0,0(%4)\n" + " jl 0b\n" + : "=&d" (old), "=m" (*(int *) addr) + : "d" (x << shift), "d" (~(65535 << shift)), "a" (addr), + "m" (*(int *) addr) : "memory", "cc", "0"); + return old >> shift; + case 4: + asm volatile( + " l %0,0(%3)\n" + "0: cs %0,%2,0(%3)\n" + " jl 0b\n" + : "=&d" (old), "=m" (*(int *) ptr) + : "d" (x), "a" (ptr), "m" (*(int *) ptr) + : "memory", "cc"); + return old; +#ifdef __s390x__ + case 8: + asm volatile( + " lg %0,0(%3)\n" + "0: csg %0,%2,0(%3)\n" + " jl 0b\n" + : "=&d" (old), "=m" (*(long *) ptr) + : "d" (x), "a" (ptr), "m" (*(long *) ptr) + : "memory", "cc"); + return old; +#endif /* __s390x__ */ + } + __xchg_called_with_bad_pointer(); + return x; +} + +/* + * Atomic compare and exchange. Compare OLD with MEM, if identical, + * store NEW in MEM. Return the initial value in MEM. Success is + * indicated by comparing RETURN with OLD. + */ + +#define __HAVE_ARCH_CMPXCHG 1 + +#define cmpxchg(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) + +extern void __cmpxchg_called_with_bad_pointer(void); + +static inline unsigned long +__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) +{ + unsigned long addr, prev, tmp; + int shift; + + switch (size) { + case 1: + addr = (unsigned long) ptr; + shift = (3 ^ (addr & 3)) << 3; + addr ^= addr & 3; + asm volatile( + " l %0,0(%4)\n" + "0: nr %0,%5\n" + " lr %1,%0\n" + " or %0,%2\n" + " or %1,%3\n" + " cs %0,%1,0(%4)\n" + " jnl 1f\n" + " xr %1,%0\n" + " nr %1,%5\n" + " jnz 0b\n" + "1:" + : "=&d" (prev), "=&d" (tmp) + : "d" (old << shift), "d" (new << shift), "a" (ptr), + "d" (~(255 << shift)) + : "memory", "cc"); + return prev >> shift; + case 2: + addr = (unsigned long) ptr; + shift = (2 ^ (addr & 2)) << 3; + addr ^= addr & 2; + asm volatile( + " l %0,0(%4)\n" + "0: nr %0,%5\n" + " lr %1,%0\n" + " or %0,%2\n" + " or %1,%3\n" + " cs %0,%1,0(%4)\n" + " jnl 1f\n" + " xr %1,%0\n" + " nr %1,%5\n" + " jnz 0b\n" + "1:" + : "=&d" (prev), "=&d" (tmp) + : "d" (old << shift), "d" (new << shift), "a" (ptr), + "d" (~(65535 << shift)) + : "memory", "cc"); + return prev >> shift; + case 4: + asm volatile( + " cs %0,%2,0(%3)\n" + : "=&d" (prev) : "0" (old), "d" (new), "a" (ptr) + : "memory", "cc"); + return prev; +#ifdef __s390x__ + case 8: + asm volatile( + " csg %0,%2,0(%3)\n" + : "=&d" (prev) : "0" (old), "d" (new), "a" (ptr) + : "memory", "cc"); + return prev; +#endif /* __s390x__ */ + } + __cmpxchg_called_with_bad_pointer(); + return old; +} + +/* + * Force strict CPU ordering. + * And yes, this is required on UP too when we're talking + * to devices. + * + * This is very similar to the ppc eieio/sync instruction in that is + * does a checkpoint syncronisation & makes sure that + * all memory ops have completed wrt other CPU's ( see 7-15 POP DJB ). + */ + +#define eieio() asm volatile("bcr 15,0" : : : "memory") +#define SYNC_OTHER_CORES(x) eieio() +#define mb() eieio() +#define rmb() eieio() +#define wmb() eieio() +#define read_barrier_depends() do { } while(0) +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#define smp_mb__before_clear_bit() smp_mb() +#define smp_mb__after_clear_bit() smp_mb() + + +#define set_mb(var, value) do { var = value; mb(); } while (0) + +#ifdef __s390x__ + +#define __ctl_load(array, low, high) ({ \ + typedef struct { char _[sizeof(array)]; } addrtype; \ + asm volatile( \ + " lctlg %1,%2,0(%0)\n" \ + : : "a" (&array), "i" (low), "i" (high), \ + "m" (*(addrtype *)(&array))); \ + }) + +#define __ctl_store(array, low, high) ({ \ + typedef struct { char _[sizeof(array)]; } addrtype; \ + asm volatile( \ + " stctg %2,%3,0(%1)\n" \ + : "=m" (*(addrtype *)(&array)) \ + : "a" (&array), "i" (low), "i" (high)); \ + }) + +#else /* __s390x__ */ + +#define __ctl_load(array, low, high) ({ \ + typedef struct { char _[sizeof(array)]; } addrtype; \ + asm volatile( \ + " lctl %1,%2,0(%0)\n" \ + : : "a" (&array), "i" (low), "i" (high), \ + "m" (*(addrtype *)(&array))); \ +}) + +#define __ctl_store(array, low, high) ({ \ + typedef struct { char _[sizeof(array)]; } addrtype; \ + asm volatile( \ + " stctl %2,%3,0(%1)\n" \ + : "=m" (*(addrtype *)(&array)) \ + : "a" (&array), "i" (low), "i" (high)); \ + }) + +#endif /* __s390x__ */ + +#define __ctl_set_bit(cr, bit) ({ \ + unsigned long __dummy; \ + __ctl_store(__dummy, cr, cr); \ + __dummy |= 1UL << (bit); \ + __ctl_load(__dummy, cr, cr); \ +}) + +#define __ctl_clear_bit(cr, bit) ({ \ + unsigned long __dummy; \ + __ctl_store(__dummy, cr, cr); \ + __dummy &= ~(1UL << (bit)); \ + __ctl_load(__dummy, cr, cr); \ +}) + +#include + +#include + +static inline unsigned long __cmpxchg_local(volatile void *ptr, + unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 1: + case 2: + case 4: +#ifdef __s390x__ + case 8: +#endif + return __cmpxchg(ptr, old, new, size); + default: + return __cmpxchg_local_generic(ptr, old, new, size); + } + + return old; +} + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) +#ifdef __s390x__ +#define cmpxchg64_local(ptr, o, n) \ + ({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg_local((ptr), (o), (n)); \ + }) +#else +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) +#endif + +/* + * Use to set psw mask except for the first byte which + * won't be changed by this function. + */ +static inline void +__set_psw_mask(unsigned long mask) +{ + __load_psw_mask(mask | (__raw_local_irq_stosm(0x00) & ~(-1UL >> 8))); +} + +#define local_mcck_enable() __set_psw_mask(psw_kernel_bits) +#define local_mcck_disable() __set_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK) + +int stfle(unsigned long long *list, int doublewords); + +#ifdef CONFIG_SMP + +extern void smp_ctl_set_bit(int cr, int bit); +extern void smp_ctl_clear_bit(int cr, int bit); +#define ctl_set_bit(cr, bit) smp_ctl_set_bit(cr, bit) +#define ctl_clear_bit(cr, bit) smp_ctl_clear_bit(cr, bit) + +#else + +#define ctl_set_bit(cr, bit) __ctl_set_bit(cr, bit) +#define ctl_clear_bit(cr, bit) __ctl_clear_bit(cr, bit) + +#endif /* CONFIG_SMP */ + +static inline unsigned int stfl(void) +{ + asm volatile( + " .insn s,0xb2b10000,0(0)\n" /* stfl */ + "0:\n" + EX_TABLE(0b,0b)); + return S390_lowcore.stfl_fac_list; +} + +static inline unsigned short stap(void) +{ + unsigned short cpu_address; + + asm volatile("stap %0" : "=m" (cpu_address)); + return cpu_address; +} + +extern void (*_machine_restart)(char *command); +extern void (*_machine_halt)(void); +extern void (*_machine_power_off)(void); + +#define arch_align_stack(x) (x) + +#ifdef CONFIG_TRACE_IRQFLAGS +extern psw_t sysc_restore_trace_psw; +extern psw_t io_restore_trace_psw; +#endif + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/s390/include/asm/tape390.h b/arch/s390/include/asm/tape390.h new file mode 100644 index 000000000000..884fba48f1ff --- /dev/null +++ b/arch/s390/include/asm/tape390.h @@ -0,0 +1,103 @@ +/************************************************************************* + * + * tape390.h + * enables user programs to display messages and control encryption + * on s390 tape devices + * + * Copyright IBM Corp. 2001,2006 + * Author(s): Michael Holzheu + * + *************************************************************************/ + +#ifndef _TAPE390_H +#define _TAPE390_H + +#define TAPE390_DISPLAY _IOW('d', 1, struct display_struct) + +/* + * The TAPE390_DISPLAY ioctl calls the Load Display command + * which transfers 17 bytes of data from the channel to the subsystem: + * - 1 format control byte, and + * - two 8-byte messages + * + * Format control byte: + * 0-2: New Message Overlay + * 3: Alternate Messages + * 4: Blink Message + * 5: Display Low/High Message + * 6: Reserved + * 7: Automatic Load Request + * + */ + +typedef struct display_struct { + char cntrl; + char message1[8]; + char message2[8]; +} display_struct; + +/* + * Tape encryption support + */ + +struct tape390_crypt_info { + char capability; + char status; + char medium_status; +} __attribute__ ((packed)); + + +/* Macros for "capable" field */ +#define TAPE390_CRYPT_SUPPORTED_MASK 0x01 +#define TAPE390_CRYPT_SUPPORTED(x) \ + ((x.capability & TAPE390_CRYPT_SUPPORTED_MASK)) + +/* Macros for "status" field */ +#define TAPE390_CRYPT_ON_MASK 0x01 +#define TAPE390_CRYPT_ON(x) (((x.status) & TAPE390_CRYPT_ON_MASK)) + +/* Macros for "medium status" field */ +#define TAPE390_MEDIUM_LOADED_MASK 0x01 +#define TAPE390_MEDIUM_ENCRYPTED_MASK 0x02 +#define TAPE390_MEDIUM_ENCRYPTED(x) \ + (((x.medium_status) & TAPE390_MEDIUM_ENCRYPTED_MASK)) +#define TAPE390_MEDIUM_LOADED(x) \ + (((x.medium_status) & TAPE390_MEDIUM_LOADED_MASK)) + +/* + * The TAPE390_CRYPT_SET ioctl is used to switch on/off encryption. + * The "encryption_capable" and "tape_status" fields are ignored for this ioctl! + */ +#define TAPE390_CRYPT_SET _IOW('d', 2, struct tape390_crypt_info) + +/* + * The TAPE390_CRYPT_QUERY ioctl is used to query the encryption state. + */ +#define TAPE390_CRYPT_QUERY _IOR('d', 3, struct tape390_crypt_info) + +/* Values for "kekl1/2_type" and "kekl1/2_type_on_tape" fields */ +#define TAPE390_KEKL_TYPE_NONE 0 +#define TAPE390_KEKL_TYPE_LABEL 1 +#define TAPE390_KEKL_TYPE_HASH 2 + +struct tape390_kekl { + unsigned char type; + unsigned char type_on_tape; + char label[65]; +} __attribute__ ((packed)); + +struct tape390_kekl_pair { + struct tape390_kekl kekl[2]; +} __attribute__ ((packed)); + +/* + * The TAPE390_KEKL_SET ioctl is used to set Key Encrypting Key labels. + */ +#define TAPE390_KEKL_SET _IOW('d', 4, struct tape390_kekl_pair) + +/* + * The TAPE390_KEKL_QUERY ioctl is used to query Key Encrypting Key labels. + */ +#define TAPE390_KEKL_QUERY _IOR('d', 5, struct tape390_kekl_pair) + +#endif diff --git a/arch/s390/include/asm/termbits.h b/arch/s390/include/asm/termbits.h new file mode 100644 index 000000000000..58731853d529 --- /dev/null +++ b/arch/s390/include/asm/termbits.h @@ -0,0 +1,206 @@ +/* + * include/asm-s390/termbits.h + * + * S390 version + * + * Derived from "include/asm-i386/termbits.h" + */ + +#ifndef __ARCH_S390_TERMBITS_H__ +#define __ARCH_S390_TERMBITS_H__ + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif diff --git a/arch/s390/include/asm/termios.h b/arch/s390/include/asm/termios.h new file mode 100644 index 000000000000..67f66278f533 --- /dev/null +++ b/arch/s390/include/asm/termios.h @@ -0,0 +1,67 @@ +/* + * include/asm-s390/termios.h + * + * S390 version + * + * Derived from "include/asm-i386/termios.h" + */ + +#ifndef _S390_TERMIOS_H +#define _S390_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +#ifdef __KERNEL__ + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) + +#include + +#endif /* __KERNEL__ */ + +#endif /* _S390_TERMIOS_H */ diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h new file mode 100644 index 000000000000..91a8f93ad355 --- /dev/null +++ b/arch/s390/include/asm/thread_info.h @@ -0,0 +1,118 @@ +/* + * include/asm-s390/thread_info.h + * + * S390 version + * Copyright (C) IBM Corp. 2002,2006 + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#ifdef __KERNEL__ + +/* + * Size of kernel stack for each process + */ +#ifndef __s390x__ +#ifndef __SMALL_STACK +#define THREAD_ORDER 1 +#define ASYNC_ORDER 1 +#else +#define THREAD_ORDER 0 +#define ASYNC_ORDER 0 +#endif +#else /* __s390x__ */ +#ifndef __SMALL_STACK +#define THREAD_ORDER 2 +#define ASYNC_ORDER 2 +#else +#define THREAD_ORDER 1 +#define ASYNC_ORDER 1 +#endif +#endif /* __s390x__ */ + +#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER) +#define ASYNC_SIZE (PAGE_SIZE << ASYNC_ORDER) + +#ifndef __ASSEMBLY__ +#include +#include + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, the assembly constants must also be changed + */ +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + unsigned int cpu; /* current CPU */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ + struct restart_block restart_block; +}; + +/* + * macros/functions for gaining access to the thread information structure + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + return (struct thread_info *)((*(unsigned long *) __LC_KERNEL_STACK)-THREAD_SIZE); +} + +#define THREAD_SIZE_ORDER THREAD_ORDER + +#endif + +/* + * thread information flags bit numbers + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_RESTART_SVC 4 /* restart svc with new svc number */ +#define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */ +#define TIF_SINGLE_STEP 6 /* deliver sigtrap on return to user */ +#define TIF_MCCK_PENDING 7 /* machine check handling is pending */ +#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ +#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling + TIF_NEED_RESCHED */ +#define TIF_31BIT 18 /* 32bit process */ +#define TIF_MEMDIE 19 +#define TIF_RESTORE_SIGMASK 20 /* restore signal mask in do_signal() */ + +#define _TIF_SYSCALL_TRACE (1< + +#define VTIMER_MAX_SLICE (0x7ffffffffffff000LL) + +struct vtimer_list { + struct list_head entry; + + int cpu; + __u64 expires; + __u64 interval; + + spinlock_t lock; + unsigned long magic; + + void (*function)(unsigned long); + unsigned long data; +}; + +/* the offset value will wrap after ca. 71 years */ +struct vtimer_queue { + struct list_head list; + spinlock_t lock; + __u64 to_expire; /* current event expire time */ + __u64 offset; /* list offset to zero */ + __u64 idle; /* temp var for idle */ +}; + +extern void init_virt_timer(struct vtimer_list *timer); +extern void add_virt_timer(void *new); +extern void add_virt_timer_periodic(void *new); +extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires); +extern int del_virt_timer(struct vtimer_list *timer); + +extern void init_cpu_vtimer(void); +extern void vtime_init(void); + +#ifdef CONFIG_VIRT_TIMER + +extern void vtime_start_cpu_timer(void); +extern void vtime_stop_cpu_timer(void); + +#else + +static inline void vtime_start_cpu_timer(void) { } +static inline void vtime_stop_cpu_timer(void) { } + +#endif /* CONFIG_VIRT_TIMER */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_S390_TIMER_H */ diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h new file mode 100644 index 000000000000..d744c3d62de5 --- /dev/null +++ b/arch/s390/include/asm/timex.h @@ -0,0 +1,88 @@ +/* + * include/asm-s390/timex.h + * + * S390 version + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * + * Derived from "include/asm-i386/timex.h" + * Copyright (C) 1992, Linus Torvalds + */ + +#ifndef _ASM_S390_TIMEX_H +#define _ASM_S390_TIMEX_H + +/* Inline functions for clock register access. */ +static inline int set_clock(__u64 time) +{ + int cc; + + asm volatile( + " sck 0(%2)\n" + " ipm %0\n" + " srl %0,28\n" + : "=d" (cc) : "m" (time), "a" (&time) : "cc"); + return cc; +} + +static inline int store_clock(__u64 *time) +{ + int cc; + + asm volatile( + " stck 0(%2)\n" + " ipm %0\n" + " srl %0,28\n" + : "=d" (cc), "=m" (*time) : "a" (time) : "cc"); + return cc; +} + +static inline void set_clock_comparator(__u64 time) +{ + asm volatile("sckc 0(%1)" : : "m" (time), "a" (&time)); +} + +static inline void store_clock_comparator(__u64 *time) +{ + asm volatile("stckc 0(%1)" : "=m" (*time) : "a" (time)); +} + +#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ + +typedef unsigned long long cycles_t; + +static inline unsigned long long get_clock (void) +{ + unsigned long long clk; + +#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) + asm volatile("stck %0" : "=Q" (clk) : : "cc"); +#else /* __GNUC__ */ + asm volatile("stck 0(%1)" : "=m" (clk) : "a" (&clk) : "cc"); +#endif /* __GNUC__ */ + return clk; +} + +static inline unsigned long long get_clock_xt(void) +{ + unsigned char clk[16]; + +#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) + asm volatile("stcke %0" : "=Q" (clk) : : "cc"); +#else /* __GNUC__ */ + asm volatile("stcke 0(%1)" : "=m" (clk) + : "a" (clk) : "cc"); +#endif /* __GNUC__ */ + + return *((unsigned long long *)&clk[1]); +} + +static inline cycles_t get_cycles(void) +{ + return (cycles_t) get_clock() >> 2; +} + +int get_sync_clock(unsigned long long *clock); +void init_cpu_timer(void); +unsigned long long monotonic_clock(void); + +#endif diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h new file mode 100644 index 000000000000..3d8a96d39d9d --- /dev/null +++ b/arch/s390/include/asm/tlb.h @@ -0,0 +1,156 @@ +#ifndef _S390_TLB_H +#define _S390_TLB_H + +/* + * TLB flushing on s390 is complicated. The following requirement + * from the principles of operation is the most arduous: + * + * "A valid table entry must not be changed while it is attached + * to any CPU and may be used for translation by that CPU except to + * (1) invalidate the entry by using INVALIDATE PAGE TABLE ENTRY, + * or INVALIDATE DAT TABLE ENTRY, (2) alter bits 56-63 of a page + * table entry, or (3) make a change by means of a COMPARE AND SWAP + * AND PURGE instruction that purges the TLB." + * + * The modification of a pte of an active mm struct therefore is + * a two step process: i) invalidate the pte, ii) store the new pte. + * This is true for the page protection bit as well. + * The only possible optimization is to flush at the beginning of + * a tlb_gather_mmu cycle if the mm_struct is currently not in use. + * + * Pages used for the page tables is a different story. FIXME: more + */ + +#include +#include +#include +#include +#include +#include + +#ifndef CONFIG_SMP +#define TLB_NR_PTRS 1 +#else +#define TLB_NR_PTRS 508 +#endif + +struct mmu_gather { + struct mm_struct *mm; + unsigned int fullmm; + unsigned int nr_ptes; + unsigned int nr_pxds; + void *array[TLB_NR_PTRS]; +}; + +DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); + +static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm, + unsigned int full_mm_flush) +{ + struct mmu_gather *tlb = &get_cpu_var(mmu_gathers); + + tlb->mm = mm; + tlb->fullmm = full_mm_flush || (num_online_cpus() == 1) || + (atomic_read(&mm->mm_users) <= 1 && mm == current->active_mm); + tlb->nr_ptes = 0; + tlb->nr_pxds = TLB_NR_PTRS; + if (tlb->fullmm) + __tlb_flush_mm(mm); + return tlb; +} + +static inline void tlb_flush_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) +{ + if (!tlb->fullmm && (tlb->nr_ptes > 0 || tlb->nr_pxds < TLB_NR_PTRS)) + __tlb_flush_mm(tlb->mm); + while (tlb->nr_ptes > 0) + pte_free(tlb->mm, tlb->array[--tlb->nr_ptes]); + while (tlb->nr_pxds < TLB_NR_PTRS) + /* pgd_free frees the pointer as region or segment table */ + pgd_free(tlb->mm, tlb->array[tlb->nr_pxds++]); +} + +static inline void tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) +{ + tlb_flush_mmu(tlb, start, end); + + /* keep the page table cache within bounds */ + check_pgt_cache(); + + put_cpu_var(mmu_gathers); +} + +/* + * Release the page cache reference for a pte removed by + * tlb_ptep_clear_flush. In both flush modes the tlb fo a page cache page + * has already been freed, so just do free_page_and_swap_cache. + */ +static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) +{ + free_page_and_swap_cache(page); +} + +/* + * pte_free_tlb frees a pte table and clears the CRSTE for the + * page table from the tlb. + */ +static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte) +{ + if (!tlb->fullmm) { + tlb->array[tlb->nr_ptes++] = pte; + if (tlb->nr_ptes >= tlb->nr_pxds) + tlb_flush_mmu(tlb, 0, 0); + } else + pte_free(tlb->mm, pte); +} + +/* + * pmd_free_tlb frees a pmd table and clears the CRSTE for the + * segment table entry from the tlb. + * If the mm uses a two level page table the single pmd is freed + * as the pgd. pmd_free_tlb checks the asce_limit against 2GB + * to avoid the double free of the pmd in this case. + */ +static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) +{ +#ifdef __s390x__ + if (tlb->mm->context.asce_limit <= (1UL << 31)) + return; + if (!tlb->fullmm) { + tlb->array[--tlb->nr_pxds] = pmd; + if (tlb->nr_ptes >= tlb->nr_pxds) + tlb_flush_mmu(tlb, 0, 0); + } else + pmd_free(tlb->mm, pmd); +#endif +} + +/* + * pud_free_tlb frees a pud table and clears the CRSTE for the + * region third table entry from the tlb. + * If the mm uses a three level page table the single pud is freed + * as the pgd. pud_free_tlb checks the asce_limit against 4TB + * to avoid the double free of the pud in this case. + */ +static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud) +{ +#ifdef __s390x__ + if (tlb->mm->context.asce_limit <= (1UL << 42)) + return; + if (!tlb->fullmm) { + tlb->array[--tlb->nr_pxds] = pud; + if (tlb->nr_ptes >= tlb->nr_pxds) + tlb_flush_mmu(tlb, 0, 0); + } else + pud_free(tlb->mm, pud); +#endif +} + +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define tlb_remove_tlb_entry(tlb, ptep, addr) do { } while (0) +#define tlb_migrate_finish(mm) do { } while (0) + +#endif /* _S390_TLB_H */ diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h new file mode 100644 index 000000000000..d60394b9745e --- /dev/null +++ b/arch/s390/include/asm/tlbflush.h @@ -0,0 +1,140 @@ +#ifndef _S390_TLBFLUSH_H +#define _S390_TLBFLUSH_H + +#include +#include +#include +#include + +/* + * Flush all tlb entries on the local cpu. + */ +static inline void __tlb_flush_local(void) +{ + asm volatile("ptlb" : : : "memory"); +} + +#ifdef CONFIG_SMP +/* + * Flush all tlb entries on all cpus. + */ +void smp_ptlb_all(void); + +static inline void __tlb_flush_global(void) +{ + register unsigned long reg2 asm("2"); + register unsigned long reg3 asm("3"); + register unsigned long reg4 asm("4"); + long dummy; + +#ifndef __s390x__ + if (!MACHINE_HAS_CSP) { + smp_ptlb_all(); + return; + } +#endif /* __s390x__ */ + + dummy = 0; + reg2 = reg3 = 0; + reg4 = ((unsigned long) &dummy) + 1; + asm volatile( + " csp %0,%2" + : : "d" (reg2), "d" (reg3), "d" (reg4), "m" (dummy) : "cc" ); +} + +static inline void __tlb_flush_full(struct mm_struct *mm) +{ + cpumask_t local_cpumask; + + preempt_disable(); + /* + * If the process only ran on the local cpu, do a local flush. + */ + local_cpumask = cpumask_of_cpu(smp_processor_id()); + if (cpus_equal(mm->cpu_vm_mask, local_cpumask)) + __tlb_flush_local(); + else + __tlb_flush_global(); + preempt_enable(); +} +#else +#define __tlb_flush_full(mm) __tlb_flush_local() +#endif + +/* + * Flush all tlb entries of a page table on all cpus. + */ +static inline void __tlb_flush_idte(unsigned long asce) +{ + asm volatile( + " .insn rrf,0xb98e0000,0,%0,%1,0" + : : "a" (2048), "a" (asce) : "cc" ); +} + +static inline void __tlb_flush_mm(struct mm_struct * mm) +{ + if (unlikely(cpus_empty(mm->cpu_vm_mask))) + return; + /* + * If the machine has IDTE we prefer to do a per mm flush + * on all cpus instead of doing a local flush if the mm + * only ran on the local cpu. + */ + if (MACHINE_HAS_IDTE) { + if (mm->context.noexec) + __tlb_flush_idte((unsigned long) + get_shadow_table(mm->pgd) | + mm->context.asce_bits); + __tlb_flush_idte((unsigned long) mm->pgd | + mm->context.asce_bits); + return; + } + __tlb_flush_full(mm); +} + +static inline void __tlb_flush_mm_cond(struct mm_struct * mm) +{ + if (atomic_read(&mm->mm_users) <= 1 && mm == current->active_mm) + __tlb_flush_mm(mm); +} + +/* + * TLB flushing: + * flush_tlb() - flushes the current mm struct TLBs + * flush_tlb_all() - flushes all processes TLBs + * flush_tlb_mm(mm) - flushes the specified mm context TLB's + * flush_tlb_page(vma, vmaddr) - flushes one page + * flush_tlb_range(vma, start, end) - flushes a range of pages + * flush_tlb_kernel_range(start, end) - flushes a range of kernel pages + */ + +/* + * flush_tlb_mm goes together with ptep_set_wrprotect for the + * copy_page_range operation and flush_tlb_range is related to + * ptep_get_and_clear for change_protection. ptep_set_wrprotect and + * ptep_get_and_clear do not flush the TLBs directly if the mm has + * only one user. At the end of the update the flush_tlb_mm and + * flush_tlb_range functions need to do the flush. + */ +#define flush_tlb() do { } while (0) +#define flush_tlb_all() do { } while (0) +#define flush_tlb_page(vma, addr) do { } while (0) + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + __tlb_flush_mm_cond(mm); +} + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + __tlb_flush_mm_cond(vma->vm_mm); +} + +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ + __tlb_flush_mm(&init_mm); +} + +#endif /* _S390_TLBFLUSH_H */ diff --git a/arch/s390/include/asm/todclk.h b/arch/s390/include/asm/todclk.h new file mode 100644 index 000000000000..c7f62055488a --- /dev/null +++ b/arch/s390/include/asm/todclk.h @@ -0,0 +1,23 @@ +/* + * File...........: linux/include/asm/todclk.h + * Author(s)......: Holger Smolinski + * Bugreports.to..: + * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000 + * + * History of changes (starts July 2000) + */ + +#ifndef __ASM_TODCLK_H +#define __ASM_TODCLK_H + +#ifdef __KERNEL__ + +#define TOD_uSEC (0x1000ULL) +#define TOD_mSEC (1000 * TOD_uSEC) +#define TOD_SEC (1000 * TOD_mSEC) +#define TOD_MIN (60 * TOD_SEC) +#define TOD_HOUR (60 * TOD_MIN) + +#endif + +#endif diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h new file mode 100644 index 000000000000..d96c91643458 --- /dev/null +++ b/arch/s390/include/asm/topology.h @@ -0,0 +1,33 @@ +#ifndef _ASM_S390_TOPOLOGY_H +#define _ASM_S390_TOPOLOGY_H + +#include + +#define mc_capable() (1) + +cpumask_t cpu_coregroup_map(unsigned int cpu); + +extern cpumask_t cpu_core_map[NR_CPUS]; + +#define topology_core_siblings(cpu) (cpu_core_map[cpu]) + +int topology_set_cpu_management(int fc); +void topology_schedule_update(void); + +#define POLARIZATION_UNKNWN (-1) +#define POLARIZATION_HRZ (0) +#define POLARIZATION_VL (1) +#define POLARIZATION_VM (2) +#define POLARIZATION_VH (3) + +#ifdef CONFIG_SMP +void s390_init_cpu_topology(void); +#else +static inline void s390_init_cpu_topology(void) +{ +}; +#endif + +#include + +#endif /* _ASM_S390_TOPOLOGY_H */ diff --git a/arch/s390/include/asm/types.h b/arch/s390/include/asm/types.h new file mode 100644 index 000000000000..41c547656130 --- /dev/null +++ b/arch/s390/include/asm/types.h @@ -0,0 +1,63 @@ +/* + * include/asm-s390/types.h + * + * S390 version + * + * Derived from "include/asm-i386/types.h" + */ + +#ifndef _S390_TYPES_H +#define _S390_TYPES_H + +#ifndef __s390x__ +# include +#else +# include +#endif + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +/* A address type so that arithmetic can be done on it & it can be upgraded to + 64 bit when necessary +*/ +typedef unsigned long addr_t; +typedef __signed__ long saddr_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#ifndef __s390x__ +#define BITS_PER_LONG 32 +#else +#define BITS_PER_LONG 64 +#endif + +#ifndef __ASSEMBLY__ + +typedef u64 dma64_addr_t; +#ifdef __s390x__ +/* DMA addresses come in 32-bit and 64-bit flavours. */ +typedef u64 dma_addr_t; +#else +typedef u32 dma_addr_t; +#endif + +#ifndef __s390x__ +typedef union { + unsigned long long pair; + struct { + unsigned long even; + unsigned long odd; + } subreg; +} register_pair; + +#endif /* ! __s390x__ */ +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _S390_TYPES_H */ diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h new file mode 100644 index 000000000000..0235970278f0 --- /dev/null +++ b/arch/s390/include/asm/uaccess.h @@ -0,0 +1,363 @@ +/* + * include/asm-s390/uaccess.h + * + * S390 version + * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Hartmut Penner (hp@de.ibm.com), + * Martin Schwidefsky (schwidefsky@de.ibm.com) + * + * Derived from "include/asm-i386/uaccess.h" + */ +#ifndef __S390_UACCESS_H +#define __S390_UACCESS_H + +/* + * User space memory access functions + */ +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + */ + +#define MAKE_MM_SEG(a) ((mm_segment_t) { (a) }) + + +#define KERNEL_DS MAKE_MM_SEG(0) +#define USER_DS MAKE_MM_SEG(1) + +#define get_ds() (KERNEL_DS) +#define get_fs() (current->thread.mm_segment) + +#define set_fs(x) \ +({ \ + unsigned long __pto; \ + current->thread.mm_segment = (x); \ + __pto = current->thread.mm_segment.ar4 ? \ + S390_lowcore.user_asce : S390_lowcore.kernel_asce; \ + __ctl_load(__pto, 7, 7); \ +}) + +#define segment_eq(a,b) ((a).ar4 == (b).ar4) + + +static inline int __access_ok(const void __user *addr, unsigned long size) +{ + return 1; +} +#define access_ok(type,addr,size) __access_ok(addr,size) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +struct uaccess_ops { + size_t (*copy_from_user)(size_t, const void __user *, void *); + size_t (*copy_from_user_small)(size_t, const void __user *, void *); + size_t (*copy_to_user)(size_t, void __user *, const void *); + size_t (*copy_to_user_small)(size_t, void __user *, const void *); + size_t (*copy_in_user)(size_t, void __user *, const void __user *); + size_t (*clear_user)(size_t, void __user *); + size_t (*strnlen_user)(size_t, const char __user *); + size_t (*strncpy_from_user)(size_t, const char __user *, char *); + int (*futex_atomic_op)(int op, int __user *, int oparg, int *old); + int (*futex_atomic_cmpxchg)(int __user *, int old, int new); +}; + +extern struct uaccess_ops uaccess; +extern struct uaccess_ops uaccess_std; +extern struct uaccess_ops uaccess_mvcos; +extern struct uaccess_ops uaccess_mvcos_switch; +extern struct uaccess_ops uaccess_pt; + +static inline int __put_user_fn(size_t size, void __user *ptr, void *x) +{ + size = uaccess.copy_to_user_small(size, ptr, x); + return size ? -EFAULT : size; +} + +static inline int __get_user_fn(size_t size, const void __user *ptr, void *x) +{ + size = uaccess.copy_from_user_small(size, ptr, x); + return size ? -EFAULT : size; +} + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + */ +#define __put_user(x, ptr) \ +({ \ + __typeof__(*(ptr)) __x = (x); \ + int __pu_err = -EFAULT; \ + __chk_user_ptr(ptr); \ + switch (sizeof (*(ptr))) { \ + case 1: \ + case 2: \ + case 4: \ + case 8: \ + __pu_err = __put_user_fn(sizeof (*(ptr)), \ + ptr, &__x); \ + break; \ + default: \ + __put_user_bad(); \ + break; \ + } \ + __pu_err; \ +}) + +#define put_user(x, ptr) \ +({ \ + might_sleep(); \ + __put_user(x, ptr); \ +}) + + +extern int __put_user_bad(void) __attribute__((noreturn)); + +#define __get_user(x, ptr) \ +({ \ + int __gu_err = -EFAULT; \ + __chk_user_ptr(ptr); \ + switch (sizeof(*(ptr))) { \ + case 1: { \ + unsigned char __x; \ + __gu_err = __get_user_fn(sizeof (*(ptr)), \ + ptr, &__x); \ + (x) = *(__force __typeof__(*(ptr)) *) &__x; \ + break; \ + }; \ + case 2: { \ + unsigned short __x; \ + __gu_err = __get_user_fn(sizeof (*(ptr)), \ + ptr, &__x); \ + (x) = *(__force __typeof__(*(ptr)) *) &__x; \ + break; \ + }; \ + case 4: { \ + unsigned int __x; \ + __gu_err = __get_user_fn(sizeof (*(ptr)), \ + ptr, &__x); \ + (x) = *(__force __typeof__(*(ptr)) *) &__x; \ + break; \ + }; \ + case 8: { \ + unsigned long long __x; \ + __gu_err = __get_user_fn(sizeof (*(ptr)), \ + ptr, &__x); \ + (x) = *(__force __typeof__(*(ptr)) *) &__x; \ + break; \ + }; \ + default: \ + __get_user_bad(); \ + break; \ + } \ + __gu_err; \ +}) + +#define get_user(x, ptr) \ +({ \ + might_sleep(); \ + __get_user(x, ptr); \ +}) + +extern int __get_user_bad(void) __attribute__((noreturn)); + +#define __put_user_unaligned __put_user +#define __get_user_unaligned __get_user + +/** + * __copy_to_user: - Copy a block of data into user space, with less checking. + * @to: Destination address, in user space. + * @from: Source address, in kernel space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from kernel space to user space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + */ +static inline unsigned long __must_check +__copy_to_user(void __user *to, const void *from, unsigned long n) +{ + if (__builtin_constant_p(n) && (n <= 256)) + return uaccess.copy_to_user_small(n, to, from); + else + return uaccess.copy_to_user(n, to, from); +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +/** + * copy_to_user: - Copy a block of data into user space. + * @to: Destination address, in user space. + * @from: Source address, in kernel space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from kernel space to user space. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + */ +static inline unsigned long __must_check +copy_to_user(void __user *to, const void *from, unsigned long n) +{ + might_sleep(); + if (access_ok(VERIFY_WRITE, to, n)) + n = __copy_to_user(to, from, n); + return n; +} + +/** + * __copy_from_user: - Copy a block of data from user space, with less checking. + * @to: Destination address, in kernel space. + * @from: Source address, in user space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from user space to kernel space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + * + * If some data could not be copied, this function will pad the copied + * data to the requested size using zero bytes. + */ +static inline unsigned long __must_check +__copy_from_user(void *to, const void __user *from, unsigned long n) +{ + if (__builtin_constant_p(n) && (n <= 256)) + return uaccess.copy_from_user_small(n, from, to); + else + return uaccess.copy_from_user(n, from, to); +} + +/** + * copy_from_user: - Copy a block of data from user space. + * @to: Destination address, in kernel space. + * @from: Source address, in user space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from user space to kernel space. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + * + * If some data could not be copied, this function will pad the copied + * data to the requested size using zero bytes. + */ +static inline unsigned long __must_check +copy_from_user(void *to, const void __user *from, unsigned long n) +{ + might_sleep(); + if (access_ok(VERIFY_READ, from, n)) + n = __copy_from_user(to, from, n); + else + memset(to, 0, n); + return n; +} + +static inline unsigned long __must_check +__copy_in_user(void __user *to, const void __user *from, unsigned long n) +{ + return uaccess.copy_in_user(n, to, from); +} + +static inline unsigned long __must_check +copy_in_user(void __user *to, const void __user *from, unsigned long n) +{ + might_sleep(); + if (__access_ok(from,n) && __access_ok(to,n)) + n = __copy_in_user(to, from, n); + return n; +} + +/* + * Copy a null terminated string from userspace. + */ +static inline long __must_check +strncpy_from_user(char *dst, const char __user *src, long count) +{ + long res = -EFAULT; + might_sleep(); + if (access_ok(VERIFY_READ, src, 1)) + res = uaccess.strncpy_from_user(count, src, dst); + return res; +} + +static inline unsigned long +strnlen_user(const char __user * src, unsigned long n) +{ + might_sleep(); + return uaccess.strnlen_user(n, src); +} + +/** + * strlen_user: - Get the size of a string in user space. + * @str: The string to measure. + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * + * If there is a limit on the length of a valid string, you may wish to + * consider using strnlen_user() instead. + */ +#define strlen_user(str) strnlen_user(str, ~0UL) + +/* + * Zero Userspace + */ + +static inline unsigned long __must_check +__clear_user(void __user *to, unsigned long n) +{ + return uaccess.clear_user(n, to); +} + +static inline unsigned long __must_check +clear_user(void __user *to, unsigned long n) +{ + might_sleep(); + if (access_ok(VERIFY_WRITE, to, n)) + n = uaccess.clear_user(n, to); + return n; +} + +#endif /* __S390_UACCESS_H */ diff --git a/arch/s390/include/asm/ucontext.h b/arch/s390/include/asm/ucontext.h new file mode 100644 index 000000000000..d69bec0b03f5 --- /dev/null +++ b/arch/s390/include/asm/ucontext.h @@ -0,0 +1,20 @@ +/* + * include/asm-s390/ucontext.h + * + * S390 version + * + * Derived from "include/asm-i386/ucontext.h" + */ + +#ifndef _ASM_S390_UCONTEXT_H +#define _ASM_S390_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + _sigregs uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* !_ASM_S390_UCONTEXT_H */ diff --git a/arch/s390/include/asm/unaligned.h b/arch/s390/include/asm/unaligned.h new file mode 100644 index 000000000000..da9627afe5d8 --- /dev/null +++ b/arch/s390/include/asm/unaligned.h @@ -0,0 +1,13 @@ +#ifndef _ASM_S390_UNALIGNED_H +#define _ASM_S390_UNALIGNED_H + +/* + * The S390 can do unaligned accesses itself. + */ +#include +#include + +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#endif /* _ASM_S390_UNALIGNED_H */ diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h new file mode 100644 index 000000000000..c8ad350d1444 --- /dev/null +++ b/arch/s390/include/asm/unistd.h @@ -0,0 +1,411 @@ +/* + * include/asm-s390/unistd.h + * + * S390 version + * + * Derived from "include/asm-i386/unistd.h" + */ + +#ifndef _ASM_S390_UNISTD_H_ +#define _ASM_S390_UNISTD_H_ + +/* + * This file contains the system call numbers. + */ + +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_restart_syscall 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_brk 45 +#define __NR_signal 48 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_setpgid 57 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_symlink 83 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_lookup_dcookie 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_getdents 141 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_getpmsg 188 +#define __NR_putpmsg 189 +#define __NR_vfork 190 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 +#define __NR_getdents64 220 +#define __NR_readahead 222 +#define __NR_setxattr 224 +#define __NR_lsetxattr 225 +#define __NR_fsetxattr 226 +#define __NR_getxattr 227 +#define __NR_lgetxattr 228 +#define __NR_fgetxattr 229 +#define __NR_listxattr 230 +#define __NR_llistxattr 231 +#define __NR_flistxattr 232 +#define __NR_removexattr 233 +#define __NR_lremovexattr 234 +#define __NR_fremovexattr 235 +#define __NR_gettid 236 +#define __NR_tkill 237 +#define __NR_futex 238 +#define __NR_sched_setaffinity 239 +#define __NR_sched_getaffinity 240 +#define __NR_tgkill 241 +/* Number 242 is reserved for tux */ +#define __NR_io_setup 243 +#define __NR_io_destroy 244 +#define __NR_io_getevents 245 +#define __NR_io_submit 246 +#define __NR_io_cancel 247 +#define __NR_exit_group 248 +#define __NR_epoll_create 249 +#define __NR_epoll_ctl 250 +#define __NR_epoll_wait 251 +#define __NR_set_tid_address 252 +#define __NR_fadvise64 253 +#define __NR_timer_create 254 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +/* Number 263 is reserved for vserver */ +#define __NR_statfs64 265 +#define __NR_fstatfs64 266 +#define __NR_remap_file_pages 267 +/* Number 268 is reserved for new sys_mbind */ +/* Number 269 is reserved for new sys_get_mempolicy */ +/* Number 270 is reserved for new sys_set_mempolicy */ +#define __NR_mq_open 271 +#define __NR_mq_unlink 272 +#define __NR_mq_timedsend 273 +#define __NR_mq_timedreceive 274 +#define __NR_mq_notify 275 +#define __NR_mq_getsetattr 276 +#define __NR_kexec_load 277 +#define __NR_add_key 278 +#define __NR_request_key 279 +#define __NR_keyctl 280 +#define __NR_waitid 281 +#define __NR_ioprio_set 282 +#define __NR_ioprio_get 283 +#define __NR_inotify_init 284 +#define __NR_inotify_add_watch 285 +#define __NR_inotify_rm_watch 286 +/* Number 287 is reserved for new sys_migrate_pages */ +#define __NR_openat 288 +#define __NR_mkdirat 289 +#define __NR_mknodat 290 +#define __NR_fchownat 291 +#define __NR_futimesat 292 +#define __NR_unlinkat 294 +#define __NR_renameat 295 +#define __NR_linkat 296 +#define __NR_symlinkat 297 +#define __NR_readlinkat 298 +#define __NR_fchmodat 299 +#define __NR_faccessat 300 +#define __NR_pselect6 301 +#define __NR_ppoll 302 +#define __NR_unshare 303 +#define __NR_set_robust_list 304 +#define __NR_get_robust_list 305 +#define __NR_splice 306 +#define __NR_sync_file_range 307 +#define __NR_tee 308 +#define __NR_vmsplice 309 +/* Number 310 is reserved for new sys_move_pages */ +#define __NR_getcpu 311 +#define __NR_epoll_pwait 312 +#define __NR_utimes 313 +#define __NR_fallocate 314 +#define __NR_utimensat 315 +#define __NR_signalfd 316 +#define __NR_timerfd 317 +#define __NR_eventfd 318 +#define __NR_timerfd_create 319 +#define __NR_timerfd_settime 320 +#define __NR_timerfd_gettime 321 +#define __NR_signalfd4 322 +#define __NR_eventfd2 323 +#define __NR_inotify_init1 324 +#define __NR_pipe2 325 +#define __NR_dup3 326 +#define __NR_epoll_create1 327 +#define NR_syscalls 328 + +/* + * There are some system calls that are not present on 64 bit, some + * have a different name although they do the same (e.g. __NR_chown32 + * is __NR_chown on 64 bit). + */ +#ifndef __s390x__ + +#define __NR_time 13 +#define __NR_lchown 16 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_getrlimit 76 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_fchown 95 +#define __NR_ioperm 101 +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR__newselect 142 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_chown 182 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_fcntl64 221 +#define __NR_sendfile64 223 +#define __NR_fadvise64_64 264 +#define __NR_fstatat64 293 + +#else + +#define __NR_select 142 +#define __NR_getrlimit 191 /* SuS compliant getrlimit */ +#define __NR_lchown 198 +#define __NR_getuid 199 +#define __NR_getgid 200 +#define __NR_geteuid 201 +#define __NR_getegid 202 +#define __NR_setreuid 203 +#define __NR_setregid 204 +#define __NR_getgroups 205 +#define __NR_setgroups 206 +#define __NR_fchown 207 +#define __NR_setresuid 208 +#define __NR_getresuid 209 +#define __NR_setresgid 210 +#define __NR_getresgid 211 +#define __NR_chown 212 +#define __NR_setuid 213 +#define __NR_setgid 214 +#define __NR_setfsuid 215 +#define __NR_setfsgid 216 +#define __NR_newfstatat 293 + +#endif + +#ifdef __KERNEL__ + +#ifndef CONFIG_64BIT +#define __IGNORE_select +#else +#define __IGNORE_time +#endif + +/* Ignore NUMA system calls. Not wired up on s390. */ +#define __IGNORE_mbind +#define __IGNORE_get_mempolicy +#define __IGNORE_set_mempolicy +#define __IGNORE_migrate_pages +#define __IGNORE_move_pages + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND +# ifndef CONFIG_64BIT +# define __ARCH_WANT_STAT64 +# define __ARCH_WANT_SYS_TIME +# endif +# ifdef CONFIG_COMPAT +# define __ARCH_WANT_COMPAT_SYS_TIME +# define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND +# endif + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") + +#endif /* __KERNEL__ */ +#endif /* _ASM_S390_UNISTD_H_ */ diff --git a/arch/s390/include/asm/user.h b/arch/s390/include/asm/user.h new file mode 100644 index 000000000000..1b050e35fdc6 --- /dev/null +++ b/arch/s390/include/asm/user.h @@ -0,0 +1,76 @@ +/* + * include/asm-s390/user.h + * + * S390 version + * + * Derived from "include/asm-i386/usr.h" + */ + +#ifndef _S390_USER_H +#define _S390_USER_H + +#include +#include +/* Core file format: The core file is written in such a way that gdb + can understand it and provide useful information to the user (under + linux we use the 'trad-core' bfd). There are quite a number of + obstacles to being able to view the contents of the floating point + registers, and until these are solved you will not be able to view the + contents of them. Actually, you can read in the core file and look at + the contents of the user struct to find out what the floating point + registers contain. + The actual file contents are as follows: + UPAGE: 1 page consisting of a user struct that tells gdb what is present + in the file. Directly after this is a copy of the task_struct, which + is currently not used by gdb, but it may come in useful at some point. + All of the registers are stored as part of the upage. The upage should + always be only one page. + DATA: The data area is stored. We use current->end_text to + current->brk to pick up all of the user variables, plus any memory + that may have been malloced. No attempt is made to determine if a page + is demand-zero or if a page is totally unused, we just cover the entire + range. All of the addresses are rounded in such a way that an integral + number of pages is written. + STACK: We need the stack information in order to get a meaningful + backtrace. We need to write the data from (esp) to + current->start_stack, so we round each of these off in order to be able + to write an integer number of pages. + The minimum core file size is 3 pages, or 12288 bytes. +*/ + + +/* + * This is the old layout of "struct pt_regs", and + * is still the layout used by user mode (the new + * pt_regs doesn't have all registers as the kernel + * doesn't use the extra segment registers) + */ + +/* When the kernel dumps core, it starts by dumping the user struct - + this will be used by gdb to figure out where the data and stack segments + are within the file, and what virtual addresses to use. */ +struct user { +/* We start with the registers, to mimic the way that "memory" is returned + from the ptrace(3,...) function. */ + struct user_regs_struct regs; /* Where the registers are actually stored */ +/* The rest of this junk is to help gdb figure out what goes where */ + unsigned long int u_tsize; /* Text segment size (pages). */ + unsigned long int u_dsize; /* Data segment size (pages). */ + unsigned long int u_ssize; /* Stack segment size (pages). */ + unsigned long start_code; /* Starting virtual address of text. */ + unsigned long start_stack; /* Starting virtual address of stack area. + This is actually the bottom of the stack, + the top of the stack is always found in the + esp register. */ + long int signal; /* Signal that caused the core dump. */ + unsigned long u_ar0; /* Used by gdb to help find the values for */ + /* the registers. */ + unsigned long magic; /* To uniquely identify a core file */ + char u_comm[32]; /* User command that was responsible */ +}; +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* _S390_USER_H */ diff --git a/arch/s390/include/asm/vtoc.h b/arch/s390/include/asm/vtoc.h new file mode 100644 index 000000000000..3a5267d90d29 --- /dev/null +++ b/arch/s390/include/asm/vtoc.h @@ -0,0 +1,203 @@ +/* + * include/asm-s390/vtoc.h + * + * This file contains volume label definitions for DASD devices. + * + * (C) Copyright IBM Corp. 2005 + * + * Author(s): Volker Sameske + * + */ + +#ifndef _ASM_S390_VTOC_H +#define _ASM_S390_VTOC_H + +#include + +struct vtoc_ttr +{ + __u16 tt; + __u8 r; +} __attribute__ ((packed)); + +struct vtoc_cchhb +{ + __u16 cc; + __u16 hh; + __u8 b; +} __attribute__ ((packed)); + +struct vtoc_cchh +{ + __u16 cc; + __u16 hh; +} __attribute__ ((packed)); + +struct vtoc_labeldate +{ + __u8 year; + __u16 day; +} __attribute__ ((packed)); + +struct vtoc_volume_label +{ + char volkey[4]; /* volume key = volume label */ + char vollbl[4]; /* volume label */ + char volid[6]; /* volume identifier */ + __u8 security; /* security byte */ + struct vtoc_cchhb vtoc; /* VTOC address */ + char res1[5]; /* reserved */ + char cisize[4]; /* CI-size for FBA,... */ + /* ...blanks for CKD */ + char blkperci[4]; /* no of blocks per CI (FBA), blanks for CKD */ + char labperci[4]; /* no of labels per CI (FBA), blanks for CKD */ + char res2[4]; /* reserved */ + char lvtoc[14]; /* owner code for LVTOC */ + char res3[29]; /* reserved */ +} __attribute__ ((packed)); + +struct vtoc_extent +{ + __u8 typeind; /* extent type indicator */ + __u8 seqno; /* extent sequence number */ + struct vtoc_cchh llimit; /* starting point of this extent */ + struct vtoc_cchh ulimit; /* ending point of this extent */ +} __attribute__ ((packed)); + +struct vtoc_dev_const +{ + __u16 DS4DSCYL; /* number of logical cyls */ + __u16 DS4DSTRK; /* number of tracks in a logical cylinder */ + __u16 DS4DEVTK; /* device track length */ + __u8 DS4DEVI; /* non-last keyed record overhead */ + __u8 DS4DEVL; /* last keyed record overhead */ + __u8 DS4DEVK; /* non-keyed record overhead differential */ + __u8 DS4DEVFG; /* flag byte */ + __u16 DS4DEVTL; /* device tolerance */ + __u8 DS4DEVDT; /* number of DSCB's per track */ + __u8 DS4DEVDB; /* number of directory blocks per track */ +} __attribute__ ((packed)); + +struct vtoc_format1_label +{ + char DS1DSNAM[44]; /* data set name */ + __u8 DS1FMTID; /* format identifier */ + char DS1DSSN[6]; /* data set serial number */ + __u16 DS1VOLSQ; /* volume sequence number */ + struct vtoc_labeldate DS1CREDT; /* creation date: ydd */ + struct vtoc_labeldate DS1EXPDT; /* expiration date */ + __u8 DS1NOEPV; /* number of extents on volume */ + __u8 DS1NOBDB; /* no. of bytes used in last direction blk */ + __u8 DS1FLAG1; /* flag 1 */ + char DS1SYSCD[13]; /* system code */ + struct vtoc_labeldate DS1REFD; /* date last referenced */ + __u8 DS1SMSFG; /* system managed storage indicators */ + __u8 DS1SCXTF; /* sec. space extension flag byte */ + __u16 DS1SCXTV; /* secondary space extension value */ + __u8 DS1DSRG1; /* data set organisation byte 1 */ + __u8 DS1DSRG2; /* data set organisation byte 2 */ + __u8 DS1RECFM; /* record format */ + __u8 DS1OPTCD; /* option code */ + __u16 DS1BLKL; /* block length */ + __u16 DS1LRECL; /* record length */ + __u8 DS1KEYL; /* key length */ + __u16 DS1RKP; /* relative key position */ + __u8 DS1DSIND; /* data set indicators */ + __u8 DS1SCAL1; /* secondary allocation flag byte */ + char DS1SCAL3[3]; /* secondary allocation quantity */ + struct vtoc_ttr DS1LSTAR; /* last used track and block on track */ + __u16 DS1TRBAL; /* space remaining on last used track */ + __u16 res1; /* reserved */ + struct vtoc_extent DS1EXT1; /* first extent description */ + struct vtoc_extent DS1EXT2; /* second extent description */ + struct vtoc_extent DS1EXT3; /* third extent description */ + struct vtoc_cchhb DS1PTRDS; /* possible pointer to f2 or f3 DSCB */ +} __attribute__ ((packed)); + +struct vtoc_format4_label +{ + char DS4KEYCD[44]; /* key code for VTOC labels: 44 times 0x04 */ + __u8 DS4IDFMT; /* format identifier */ + struct vtoc_cchhb DS4HPCHR; /* highest address of a format 1 DSCB */ + __u16 DS4DSREC; /* number of available DSCB's */ + struct vtoc_cchh DS4HCCHH; /* CCHH of next available alternate track */ + __u16 DS4NOATK; /* number of remaining alternate tracks */ + __u8 DS4VTOCI; /* VTOC indicators */ + __u8 DS4NOEXT; /* number of extents in VTOC */ + __u8 DS4SMSFG; /* system managed storage indicators */ + __u8 DS4DEVAC; /* number of alternate cylinders. + * Subtract from first two bytes of + * DS4DEVSZ to get number of usable + * cylinders. can be zero. valid + * only if DS4DEVAV on. */ + struct vtoc_dev_const DS4DEVCT; /* device constants */ + char DS4AMTIM[8]; /* VSAM time stamp */ + char DS4AMCAT[3]; /* VSAM catalog indicator */ + char DS4R2TIM[8]; /* VSAM volume/catalog match time stamp */ + char res1[5]; /* reserved */ + char DS4F6PTR[5]; /* pointer to first format 6 DSCB */ + struct vtoc_extent DS4VTOCE; /* VTOC extent description */ + char res2[10]; /* reserved */ + __u8 DS4EFLVL; /* extended free-space management level */ + struct vtoc_cchhb DS4EFPTR; /* pointer to extended free-space info */ + char res3[9]; /* reserved */ +} __attribute__ ((packed)); + +struct vtoc_ds5ext +{ + __u16 t; /* RTA of the first track of free extent */ + __u16 fc; /* number of whole cylinders in free ext. */ + __u8 ft; /* number of remaining free tracks */ +} __attribute__ ((packed)); + +struct vtoc_format5_label +{ + char DS5KEYID[4]; /* key identifier */ + struct vtoc_ds5ext DS5AVEXT; /* first available (free-space) extent. */ + struct vtoc_ds5ext DS5EXTAV[7]; /* seven available extents */ + __u8 DS5FMTID; /* format identifier */ + struct vtoc_ds5ext DS5MAVET[18]; /* eighteen available extents */ + struct vtoc_cchhb DS5PTRDS; /* pointer to next format5 DSCB */ +} __attribute__ ((packed)); + +struct vtoc_ds7ext +{ + __u32 a; /* starting RTA value */ + __u32 b; /* ending RTA value + 1 */ +} __attribute__ ((packed)); + +struct vtoc_format7_label +{ + char DS7KEYID[4]; /* key identifier */ + struct vtoc_ds7ext DS7EXTNT[5]; /* space for 5 extent descriptions */ + __u8 DS7FMTID; /* format identifier */ + struct vtoc_ds7ext DS7ADEXT[11]; /* space for 11 extent descriptions */ + char res1[2]; /* reserved */ + struct vtoc_cchhb DS7PTRDS; /* pointer to next FMT7 DSCB */ +} __attribute__ ((packed)); + +struct vtoc_cms_label { + __u8 label_id[4]; /* Label identifier */ + __u8 vol_id[6]; /* Volid */ + __u16 version_id; /* Version identifier */ + __u32 block_size; /* Disk block size */ + __u32 origin_ptr; /* Disk origin pointer */ + __u32 usable_count; /* Number of usable cylinders/blocks */ + __u32 formatted_count; /* Maximum number of formatted cylinders/ + * blocks */ + __u32 block_count; /* Disk size in CMS blocks */ + __u32 used_count; /* Number of CMS blocks in use */ + __u32 fst_size; /* File Status Table (FST) size */ + __u32 fst_count; /* Number of FSTs per CMS block */ + __u8 format_date[6]; /* Disk FORMAT date */ + __u8 reserved1[2]; + __u32 disk_offset; /* Disk offset when reserved*/ + __u32 map_block; /* Allocation Map Block with next hole */ + __u32 hblk_disp; /* Displacement into HBLK data of next hole */ + __u32 user_disp; /* Displacement into user part of Allocation + * map */ + __u8 reserved2[4]; + __u8 segment_name[8]; /* Name of shared segment */ +} __attribute__ ((packed)); + +#endif /* _ASM_S390_VTOC_H */ diff --git a/arch/s390/include/asm/xor.h b/arch/s390/include/asm/xor.h new file mode 100644 index 000000000000..c82eb12a5b18 --- /dev/null +++ b/arch/s390/include/asm/xor.h @@ -0,0 +1 @@ +#include diff --git a/arch/s390/include/asm/zcrypt.h b/arch/s390/include/asm/zcrypt.h new file mode 100644 index 000000000000..00d3bbd44117 --- /dev/null +++ b/arch/s390/include/asm/zcrypt.h @@ -0,0 +1,276 @@ +/* + * include/asm-s390/zcrypt.h + * + * zcrypt 2.1.0 (user-visible header) + * + * Copyright (C) 2001, 2006 IBM Corporation + * Author(s): Robert Burroughs + * Eric Rossman (edrossma@us.ibm.com) + * + * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_S390_ZCRYPT_H +#define __ASM_S390_ZCRYPT_H + +#define ZCRYPT_VERSION 2 +#define ZCRYPT_RELEASE 1 +#define ZCRYPT_VARIANT 1 + +#include +#include + +/** + * struct ica_rsa_modexpo + * + * Requirements: + * - outputdatalength is at least as large as inputdatalength. + * - All key parts are right justified in their fields, padded on + * the left with zeroes. + * - length(b_key) = inputdatalength + * - length(n_modulus) = inputdatalength + */ +struct ica_rsa_modexpo { + char __user * inputdata; + unsigned int inputdatalength; + char __user * outputdata; + unsigned int outputdatalength; + char __user * b_key; + char __user * n_modulus; +}; + +/** + * struct ica_rsa_modexpo_crt + * + * Requirements: + * - inputdatalength is even. + * - outputdatalength is at least as large as inputdatalength. + * - All key parts are right justified in their fields, padded on + * the left with zeroes. + * - length(bp_key) = inputdatalength/2 + 8 + * - length(bq_key) = inputdatalength/2 + * - length(np_key) = inputdatalength/2 + 8 + * - length(nq_key) = inputdatalength/2 + * - length(u_mult_inv) = inputdatalength/2 + 8 + */ +struct ica_rsa_modexpo_crt { + char __user * inputdata; + unsigned int inputdatalength; + char __user * outputdata; + unsigned int outputdatalength; + char __user * bp_key; + char __user * bq_key; + char __user * np_prime; + char __user * nq_prime; + char __user * u_mult_inv; +}; + +/** + * CPRBX + * Note that all shorts and ints are big-endian. + * All pointer fields are 16 bytes long, and mean nothing. + * + * A request CPRB is followed by a request_parameter_block. + * + * The request (or reply) parameter block is organized thus: + * function code + * VUD block + * key block + */ +struct CPRBX { + unsigned short cprb_len; /* CPRB length 220 */ + unsigned char cprb_ver_id; /* CPRB version id. 0x02 */ + unsigned char pad_000[3]; /* Alignment pad bytes */ + unsigned char func_id[2]; /* function id 0x5432 */ + unsigned char cprb_flags[4]; /* Flags */ + unsigned int req_parml; /* request parameter buffer len */ + unsigned int req_datal; /* request data buffer */ + unsigned int rpl_msgbl; /* reply message block length */ + unsigned int rpld_parml; /* replied parameter block len */ + unsigned int rpl_datal; /* reply data block len */ + unsigned int rpld_datal; /* replied data block len */ + unsigned int req_extbl; /* request extension block len */ + unsigned char pad_001[4]; /* reserved */ + unsigned int rpld_extbl; /* replied extension block len */ + unsigned char padx000[16 - sizeof (char *)]; + unsigned char * req_parmb; /* request parm block 'address' */ + unsigned char padx001[16 - sizeof (char *)]; + unsigned char * req_datab; /* request data block 'address' */ + unsigned char padx002[16 - sizeof (char *)]; + unsigned char * rpl_parmb; /* reply parm block 'address' */ + unsigned char padx003[16 - sizeof (char *)]; + unsigned char * rpl_datab; /* reply data block 'address' */ + unsigned char padx004[16 - sizeof (char *)]; + unsigned char * req_extb; /* request extension block 'addr'*/ + unsigned char padx005[16 - sizeof (char *)]; + unsigned char * rpl_extb; /* reply extension block 'address'*/ + unsigned short ccp_rtcode; /* server return code */ + unsigned short ccp_rscode; /* server reason code */ + unsigned int mac_data_len; /* Mac Data Length */ + unsigned char logon_id[8]; /* Logon Identifier */ + unsigned char mac_value[8]; /* Mac Value */ + unsigned char mac_content_flgs;/* Mac content flag byte */ + unsigned char pad_002; /* Alignment */ + unsigned short domain; /* Domain */ + unsigned char usage_domain[4];/* Usage domain */ + unsigned char cntrl_domain[4];/* Control domain */ + unsigned char S390enf_mask[4];/* S/390 enforcement mask */ + unsigned char pad_004[36]; /* reserved */ +} __attribute__((packed)); + +/** + * xcRB + */ +struct ica_xcRB { + unsigned short agent_ID; + unsigned int user_defined; + unsigned short request_ID; + unsigned int request_control_blk_length; + unsigned char padding1[16 - sizeof (char *)]; + char __user * request_control_blk_addr; + unsigned int request_data_length; + char padding2[16 - sizeof (char *)]; + char __user * request_data_address; + unsigned int reply_control_blk_length; + char padding3[16 - sizeof (char *)]; + char __user * reply_control_blk_addr; + unsigned int reply_data_length; + char padding4[16 - sizeof (char *)]; + char __user * reply_data_addr; + unsigned short priority_window; + unsigned int status; +} __attribute__((packed)); +#define AUTOSELECT ((unsigned int)0xFFFFFFFF) + +#define ZCRYPT_IOCTL_MAGIC 'z' + +/** + * Interface notes: + * + * The ioctl()s which are implemented (along with relevant details) + * are: + * + * ICARSAMODEXPO + * Perform an RSA operation using a Modulus-Exponent pair + * This takes an ica_rsa_modexpo struct as its arg. + * + * NOTE: please refer to the comments preceding this structure + * for the implementation details for the contents of the + * block + * + * ICARSACRT + * Perform an RSA operation using a Chinese-Remainder Theorem key + * This takes an ica_rsa_modexpo_crt struct as its arg. + * + * NOTE: please refer to the comments preceding this structure + * for the implementation details for the contents of the + * block + * + * ZSECSENDCPRB + * Send an arbitrary CPRB to a crypto card. + * + * Z90STAT_STATUS_MASK + * Return an 64 element array of unsigned chars for the status of + * all devices. + * 0x01: PCICA + * 0x02: PCICC + * 0x03: PCIXCC_MCL2 + * 0x04: PCIXCC_MCL3 + * 0x05: CEX2C + * 0x06: CEX2A + * 0x0d: device is disabled via the proc filesystem + * + * Z90STAT_QDEPTH_MASK + * Return an 64 element array of unsigned chars for the queue + * depth of all devices. + * + * Z90STAT_PERDEV_REQCNT + * Return an 64 element array of unsigned integers for the number + * of successfully completed requests per device since the device + * was detected and made available. + * + * Z90STAT_REQUESTQ_COUNT + * Return an integer count of the number of entries waiting to be + * sent to a device. + * + * Z90STAT_PENDINGQ_COUNT + * Return an integer count of the number of entries sent to all + * devices awaiting the reply. + * + * Z90STAT_TOTALOPEN_COUNT + * Return an integer count of the number of open file handles. + * + * Z90STAT_DOMAIN_INDEX + * Return the integer value of the Cryptographic Domain. + * + * The following ioctls are deprecated and should be no longer used: + * + * Z90STAT_TOTALCOUNT + * Return an integer count of all device types together. + * + * Z90STAT_PCICACOUNT + * Return an integer count of all PCICAs. + * + * Z90STAT_PCICCCOUNT + * Return an integer count of all PCICCs. + * + * Z90STAT_PCIXCCMCL2COUNT + * Return an integer count of all MCL2 PCIXCCs. + * + * Z90STAT_PCIXCCMCL3COUNT + * Return an integer count of all MCL3 PCIXCCs. + * + * Z90STAT_CEX2CCOUNT + * Return an integer count of all CEX2Cs. + * + * Z90STAT_CEX2ACOUNT + * Return an integer count of all CEX2As. + * + * ICAZ90STATUS + * Return some device driver status in a ica_z90_status struct + * This takes an ica_z90_status struct as its arg. + * + * Z90STAT_PCIXCCCOUNT + * Return an integer count of all PCIXCCs (MCL2 + MCL3). + * This is DEPRECATED now that MCL3 PCIXCCs are treated differently from + * MCL2 PCIXCCs. + */ + +/** + * Supported ioctl calls + */ +#define ICARSAMODEXPO _IOC(_IOC_READ|_IOC_WRITE, ZCRYPT_IOCTL_MAGIC, 0x05, 0) +#define ICARSACRT _IOC(_IOC_READ|_IOC_WRITE, ZCRYPT_IOCTL_MAGIC, 0x06, 0) +#define ZSECSENDCPRB _IOC(_IOC_READ|_IOC_WRITE, ZCRYPT_IOCTL_MAGIC, 0x81, 0) + +/* New status calls */ +#define Z90STAT_TOTALCOUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x40, int) +#define Z90STAT_PCICACOUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x41, int) +#define Z90STAT_PCICCCOUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x42, int) +#define Z90STAT_PCIXCCMCL2COUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x4b, int) +#define Z90STAT_PCIXCCMCL3COUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x4c, int) +#define Z90STAT_CEX2CCOUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x4d, int) +#define Z90STAT_CEX2ACOUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x4e, int) +#define Z90STAT_REQUESTQ_COUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x44, int) +#define Z90STAT_PENDINGQ_COUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x45, int) +#define Z90STAT_TOTALOPEN_COUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x46, int) +#define Z90STAT_DOMAIN_INDEX _IOR(ZCRYPT_IOCTL_MAGIC, 0x47, int) +#define Z90STAT_STATUS_MASK _IOR(ZCRYPT_IOCTL_MAGIC, 0x48, char[64]) +#define Z90STAT_QDEPTH_MASK _IOR(ZCRYPT_IOCTL_MAGIC, 0x49, char[64]) +#define Z90STAT_PERDEV_REQCNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x4a, int[64]) + +#endif /* __ASM_S390_ZCRYPT_H */ diff --git a/include/asm-s390/Kbuild b/include/asm-s390/Kbuild deleted file mode 100644 index 63a23415fba6..000000000000 --- a/include/asm-s390/Kbuild +++ /dev/null @@ -1,15 +0,0 @@ -include include/asm-generic/Kbuild.asm - -header-y += dasd.h -header-y += monwriter.h -header-y += qeth.h -header-y += tape390.h -header-y += ucontext.h -header-y += vtoc.h -header-y += zcrypt.h -header-y += chsc.h - -unifdef-y += cmb.h -unifdef-y += debug.h -unifdef-y += chpid.h -unifdef-y += schid.h diff --git a/include/asm-s390/airq.h b/include/asm-s390/airq.h deleted file mode 100644 index 1ac80d6b0588..000000000000 --- a/include/asm-s390/airq.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-s390/airq.h - * - * Copyright IBM Corp. 2002,2007 - * Author(s): Ingo Adlung - * Cornelia Huck - * Arnd Bergmann - * Peter Oberparleiter - */ - -#ifndef _ASM_S390_AIRQ_H -#define _ASM_S390_AIRQ_H - -typedef void (*adapter_int_handler_t)(void *, void *); - -void *s390_register_adapter_interrupt(adapter_int_handler_t, void *, u8); -void s390_unregister_adapter_interrupt(void *, u8); - -#endif /* _ASM_S390_AIRQ_H */ diff --git a/include/asm-s390/appldata.h b/include/asm-s390/appldata.h deleted file mode 100644 index 79283dac8281..000000000000 --- a/include/asm-s390/appldata.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * include/asm-s390/appldata.h - * - * Copyright (C) IBM Corp. 2006 - * - * Author(s): Melissa Howland - */ - -#ifndef _ASM_S390_APPLDATA_H -#define _ASM_S390_APPLDATA_H - -#include - -#ifndef CONFIG_64BIT - -#define APPLDATA_START_INTERVAL_REC 0x00 /* Function codes for */ -#define APPLDATA_STOP_REC 0x01 /* DIAG 0xDC */ -#define APPLDATA_GEN_EVENT_REC 0x02 -#define APPLDATA_START_CONFIG_REC 0x03 - -/* - * Parameter list for DIAGNOSE X'DC' - */ -struct appldata_parameter_list { - u16 diag; /* The DIAGNOSE code X'00DC' */ - u8 function; /* The function code for the DIAGNOSE */ - u8 parlist_length; /* Length of the parameter list */ - u32 product_id_addr; /* Address of the 16-byte product ID */ - u16 reserved; - u16 buffer_length; /* Length of the application data buffer */ - u32 buffer_addr; /* Address of the application data buffer */ -} __attribute__ ((packed)); - -#else /* CONFIG_64BIT */ - -#define APPLDATA_START_INTERVAL_REC 0x80 -#define APPLDATA_STOP_REC 0x81 -#define APPLDATA_GEN_EVENT_REC 0x82 -#define APPLDATA_START_CONFIG_REC 0x83 - -/* - * Parameter list for DIAGNOSE X'DC' - */ -struct appldata_parameter_list { - u16 diag; - u8 function; - u8 parlist_length; - u32 unused01; - u16 reserved; - u16 buffer_length; - u32 unused02; - u64 product_id_addr; - u64 buffer_addr; -} __attribute__ ((packed)); - -#endif /* CONFIG_64BIT */ - -struct appldata_product_id { - char prod_nr[7]; /* product number */ - u16 prod_fn; /* product function */ - u8 record_nr; /* record number */ - u16 version_nr; /* version */ - u16 release_nr; /* release */ - u16 mod_lvl; /* modification level */ -} __attribute__ ((packed)); - -static inline int appldata_asm(struct appldata_product_id *id, - unsigned short fn, void *buffer, - unsigned short length) -{ - struct appldata_parameter_list parm_list; - int ry; - - if (!MACHINE_IS_VM) - return -ENOSYS; - parm_list.diag = 0xdc; - parm_list.function = fn; - parm_list.parlist_length = sizeof(parm_list); - parm_list.buffer_length = length; - parm_list.product_id_addr = (unsigned long) id; - parm_list.buffer_addr = virt_to_phys(buffer); - asm volatile( - " diag %1,%0,0xdc" - : "=d" (ry) - : "d" (&parm_list), "m" (parm_list), "m" (*id) - : "cc"); - return ry; -} - -#endif /* _ASM_S390_APPLDATA_H */ diff --git a/include/asm-s390/atomic.h b/include/asm-s390/atomic.h deleted file mode 100644 index 2d184655bc5d..000000000000 --- a/include/asm-s390/atomic.h +++ /dev/null @@ -1,285 +0,0 @@ -#ifndef __ARCH_S390_ATOMIC__ -#define __ARCH_S390_ATOMIC__ - -#include - -/* - * include/asm-s390/atomic.h - * - * S390 version - * Copyright (C) 1999-2005 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - * Denis Joseph Barrow, - * Arnd Bergmann (arndb@de.ibm.com) - * - * Derived from "include/asm-i386/bitops.h" - * Copyright (C) 1992, Linus Torvalds - * - */ - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - * S390 uses 'Compare And Swap' for atomicity in SMP enviroment - */ - -typedef struct { - int counter; -} __attribute__ ((aligned (4))) atomic_t; -#define ATOMIC_INIT(i) { (i) } - -#ifdef __KERNEL__ - -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - -#define __CS_LOOP(ptr, op_val, op_string) ({ \ - typeof(ptr->counter) old_val, new_val; \ - asm volatile( \ - " l %0,%2\n" \ - "0: lr %1,%0\n" \ - op_string " %1,%3\n" \ - " cs %0,%1,%2\n" \ - " jl 0b" \ - : "=&d" (old_val), "=&d" (new_val), \ - "=Q" (((atomic_t *)(ptr))->counter) \ - : "d" (op_val), "Q" (((atomic_t *)(ptr))->counter) \ - : "cc", "memory"); \ - new_val; \ -}) - -#else /* __GNUC__ */ - -#define __CS_LOOP(ptr, op_val, op_string) ({ \ - typeof(ptr->counter) old_val, new_val; \ - asm volatile( \ - " l %0,0(%3)\n" \ - "0: lr %1,%0\n" \ - op_string " %1,%4\n" \ - " cs %0,%1,0(%3)\n" \ - " jl 0b" \ - : "=&d" (old_val), "=&d" (new_val), \ - "=m" (((atomic_t *)(ptr))->counter) \ - : "a" (ptr), "d" (op_val), \ - "m" (((atomic_t *)(ptr))->counter) \ - : "cc", "memory"); \ - new_val; \ -}) - -#endif /* __GNUC__ */ - -static inline int atomic_read(const atomic_t *v) -{ - barrier(); - return v->counter; -} - -static inline void atomic_set(atomic_t *v, int i) -{ - v->counter = i; - barrier(); -} - -static __inline__ int atomic_add_return(int i, atomic_t * v) -{ - return __CS_LOOP(v, i, "ar"); -} -#define atomic_add(_i, _v) atomic_add_return(_i, _v) -#define atomic_add_negative(_i, _v) (atomic_add_return(_i, _v) < 0) -#define atomic_inc(_v) atomic_add_return(1, _v) -#define atomic_inc_return(_v) atomic_add_return(1, _v) -#define atomic_inc_and_test(_v) (atomic_add_return(1, _v) == 0) - -static __inline__ int atomic_sub_return(int i, atomic_t * v) -{ - return __CS_LOOP(v, i, "sr"); -} -#define atomic_sub(_i, _v) atomic_sub_return(_i, _v) -#define atomic_sub_and_test(_i, _v) (atomic_sub_return(_i, _v) == 0) -#define atomic_dec(_v) atomic_sub_return(1, _v) -#define atomic_dec_return(_v) atomic_sub_return(1, _v) -#define atomic_dec_and_test(_v) (atomic_sub_return(1, _v) == 0) - -static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t * v) -{ - __CS_LOOP(v, ~mask, "nr"); -} - -static __inline__ void atomic_set_mask(unsigned long mask, atomic_t * v) -{ - __CS_LOOP(v, mask, "or"); -} - -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -static __inline__ int atomic_cmpxchg(atomic_t *v, int old, int new) -{ -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - asm volatile( - " cs %0,%2,%1" - : "+d" (old), "=Q" (v->counter) - : "d" (new), "Q" (v->counter) - : "cc", "memory"); -#else /* __GNUC__ */ - asm volatile( - " cs %0,%3,0(%2)" - : "+d" (old), "=m" (v->counter) - : "a" (v), "d" (new), "m" (v->counter) - : "cc", "memory"); -#endif /* __GNUC__ */ - return old; -} - -static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - c = atomic_read(v); - for (;;) { - if (unlikely(c == u)) - break; - old = atomic_cmpxchg(v, c, c + a); - if (likely(old == c)) - break; - c = old; - } - return c != u; -} - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -#undef __CS_LOOP - -#ifdef __s390x__ -typedef struct { - long long counter; -} __attribute__ ((aligned (8))) atomic64_t; -#define ATOMIC64_INIT(i) { (i) } - -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - -#define __CSG_LOOP(ptr, op_val, op_string) ({ \ - typeof(ptr->counter) old_val, new_val; \ - asm volatile( \ - " lg %0,%2\n" \ - "0: lgr %1,%0\n" \ - op_string " %1,%3\n" \ - " csg %0,%1,%2\n" \ - " jl 0b" \ - : "=&d" (old_val), "=&d" (new_val), \ - "=Q" (((atomic_t *)(ptr))->counter) \ - : "d" (op_val), "Q" (((atomic_t *)(ptr))->counter) \ - : "cc", "memory" ); \ - new_val; \ -}) - -#else /* __GNUC__ */ - -#define __CSG_LOOP(ptr, op_val, op_string) ({ \ - typeof(ptr->counter) old_val, new_val; \ - asm volatile( \ - " lg %0,0(%3)\n" \ - "0: lgr %1,%0\n" \ - op_string " %1,%4\n" \ - " csg %0,%1,0(%3)\n" \ - " jl 0b" \ - : "=&d" (old_val), "=&d" (new_val), \ - "=m" (((atomic_t *)(ptr))->counter) \ - : "a" (ptr), "d" (op_val), \ - "m" (((atomic_t *)(ptr))->counter) \ - : "cc", "memory" ); \ - new_val; \ -}) - -#endif /* __GNUC__ */ - -static inline long long atomic64_read(const atomic64_t *v) -{ - barrier(); - return v->counter; -} - -static inline void atomic64_set(atomic64_t *v, long long i) -{ - v->counter = i; - barrier(); -} - -static __inline__ long long atomic64_add_return(long long i, atomic64_t * v) -{ - return __CSG_LOOP(v, i, "agr"); -} -#define atomic64_add(_i, _v) atomic64_add_return(_i, _v) -#define atomic64_add_negative(_i, _v) (atomic64_add_return(_i, _v) < 0) -#define atomic64_inc(_v) atomic64_add_return(1, _v) -#define atomic64_inc_return(_v) atomic64_add_return(1, _v) -#define atomic64_inc_and_test(_v) (atomic64_add_return(1, _v) == 0) - -static __inline__ long long atomic64_sub_return(long long i, atomic64_t * v) -{ - return __CSG_LOOP(v, i, "sgr"); -} -#define atomic64_sub(_i, _v) atomic64_sub_return(_i, _v) -#define atomic64_sub_and_test(_i, _v) (atomic64_sub_return(_i, _v) == 0) -#define atomic64_dec(_v) atomic64_sub_return(1, _v) -#define atomic64_dec_return(_v) atomic64_sub_return(1, _v) -#define atomic64_dec_and_test(_v) (atomic64_sub_return(1, _v) == 0) - -static __inline__ void atomic64_clear_mask(unsigned long mask, atomic64_t * v) -{ - __CSG_LOOP(v, ~mask, "ngr"); -} - -static __inline__ void atomic64_set_mask(unsigned long mask, atomic64_t * v) -{ - __CSG_LOOP(v, mask, "ogr"); -} - -#define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) - -static __inline__ long long atomic64_cmpxchg(atomic64_t *v, - long long old, long long new) -{ -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - asm volatile( - " csg %0,%2,%1" - : "+d" (old), "=Q" (v->counter) - : "d" (new), "Q" (v->counter) - : "cc", "memory"); -#else /* __GNUC__ */ - asm volatile( - " csg %0,%3,0(%2)" - : "+d" (old), "=m" (v->counter) - : "a" (v), "d" (new), "m" (v->counter) - : "cc", "memory"); -#endif /* __GNUC__ */ - return old; -} - -static __inline__ int atomic64_add_unless(atomic64_t *v, - long long a, long long u) -{ - long long c, old; - c = atomic64_read(v); - for (;;) { - if (unlikely(c == u)) - break; - old = atomic64_cmpxchg(v, c, c + a); - if (likely(old == c)) - break; - c = old; - } - return c != u; -} - -#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) - -#undef __CSG_LOOP -#endif - -#define smp_mb__before_atomic_dec() smp_mb() -#define smp_mb__after_atomic_dec() smp_mb() -#define smp_mb__before_atomic_inc() smp_mb() -#define smp_mb__after_atomic_inc() smp_mb() - -#include -#endif /* __KERNEL__ */ -#endif /* __ARCH_S390_ATOMIC__ */ diff --git a/include/asm-s390/auxvec.h b/include/asm-s390/auxvec.h deleted file mode 100644 index 0d340720fd99..000000000000 --- a/include/asm-s390/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMS390_AUXVEC_H -#define __ASMS390_AUXVEC_H - -#endif diff --git a/include/asm-s390/bitops.h b/include/asm-s390/bitops.h deleted file mode 100644 index b4eb24ab5af9..000000000000 --- a/include/asm-s390/bitops.h +++ /dev/null @@ -1,884 +0,0 @@ -#ifndef _S390_BITOPS_H -#define _S390_BITOPS_H - -/* - * include/asm-s390/bitops.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) - * - * Derived from "include/asm-i386/bitops.h" - * Copyright (C) 1992, Linus Torvalds - * - */ - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include - -/* - * 32 bit bitops format: - * bit 0 is the LSB of *addr; bit 31 is the MSB of *addr; - * bit 32 is the LSB of *(addr+4). That combined with the - * big endian byte order on S390 give the following bit - * order in memory: - * 1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10 \ - * 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00 - * after that follows the next long with bit numbers - * 3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30 - * 2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20 - * The reason for this bit ordering is the fact that - * in the architecture independent code bits operations - * of the form "flags |= (1 << bitnr)" are used INTERMIXED - * with operation of the form "set_bit(bitnr, flags)". - * - * 64 bit bitops format: - * bit 0 is the LSB of *addr; bit 63 is the MSB of *addr; - * bit 64 is the LSB of *(addr+8). That combined with the - * big endian byte order on S390 give the following bit - * order in memory: - * 3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30 - * 2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20 - * 1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10 - * 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00 - * after that follows the next long with bit numbers - * 7f 7e 7d 7c 7b 7a 79 78 77 76 75 74 73 72 71 70 - * 6f 6e 6d 6c 6b 6a 69 68 67 66 65 64 63 62 61 60 - * 5f 5e 5d 5c 5b 5a 59 58 57 56 55 54 53 52 51 50 - * 4f 4e 4d 4c 4b 4a 49 48 47 46 45 44 43 42 41 40 - * The reason for this bit ordering is the fact that - * in the architecture independent code bits operations - * of the form "flags |= (1 << bitnr)" are used INTERMIXED - * with operation of the form "set_bit(bitnr, flags)". - */ - -/* bitmap tables from arch/S390/kernel/bitmap.S */ -extern const char _oi_bitmap[]; -extern const char _ni_bitmap[]; -extern const char _zb_findmap[]; -extern const char _sb_findmap[]; - -#ifndef __s390x__ - -#define __BITOPS_ALIGN 3 -#define __BITOPS_WORDSIZE 32 -#define __BITOPS_OR "or" -#define __BITOPS_AND "nr" -#define __BITOPS_XOR "xr" - -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - -#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string) \ - asm volatile( \ - " l %0,%2\n" \ - "0: lr %1,%0\n" \ - __op_string " %1,%3\n" \ - " cs %0,%1,%2\n" \ - " jl 0b" \ - : "=&d" (__old), "=&d" (__new), \ - "=Q" (*(unsigned long *) __addr) \ - : "d" (__val), "Q" (*(unsigned long *) __addr) \ - : "cc"); - -#else /* __GNUC__ */ - -#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string) \ - asm volatile( \ - " l %0,0(%4)\n" \ - "0: lr %1,%0\n" \ - __op_string " %1,%3\n" \ - " cs %0,%1,0(%4)\n" \ - " jl 0b" \ - : "=&d" (__old), "=&d" (__new), \ - "=m" (*(unsigned long *) __addr) \ - : "d" (__val), "a" (__addr), \ - "m" (*(unsigned long *) __addr) : "cc"); - -#endif /* __GNUC__ */ - -#else /* __s390x__ */ - -#define __BITOPS_ALIGN 7 -#define __BITOPS_WORDSIZE 64 -#define __BITOPS_OR "ogr" -#define __BITOPS_AND "ngr" -#define __BITOPS_XOR "xgr" - -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - -#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string) \ - asm volatile( \ - " lg %0,%2\n" \ - "0: lgr %1,%0\n" \ - __op_string " %1,%3\n" \ - " csg %0,%1,%2\n" \ - " jl 0b" \ - : "=&d" (__old), "=&d" (__new), \ - "=Q" (*(unsigned long *) __addr) \ - : "d" (__val), "Q" (*(unsigned long *) __addr) \ - : "cc"); - -#else /* __GNUC__ */ - -#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string) \ - asm volatile( \ - " lg %0,0(%4)\n" \ - "0: lgr %1,%0\n" \ - __op_string " %1,%3\n" \ - " csg %0,%1,0(%4)\n" \ - " jl 0b" \ - : "=&d" (__old), "=&d" (__new), \ - "=m" (*(unsigned long *) __addr) \ - : "d" (__val), "a" (__addr), \ - "m" (*(unsigned long *) __addr) : "cc"); - - -#endif /* __GNUC__ */ - -#endif /* __s390x__ */ - -#define __BITOPS_WORDS(bits) (((bits)+__BITOPS_WORDSIZE-1)/__BITOPS_WORDSIZE) -#define __BITOPS_BARRIER() asm volatile("" : : : "memory") - -#ifdef CONFIG_SMP -/* - * SMP safe set_bit routine based on compare and swap (CS) - */ -static inline void set_bit_cs(unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr, old, new, mask; - - addr = (unsigned long) ptr; - /* calculate address for CS */ - addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3; - /* make OR mask */ - mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1)); - /* Do the atomic update. */ - __BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR); -} - -/* - * SMP safe clear_bit routine based on compare and swap (CS) - */ -static inline void clear_bit_cs(unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr, old, new, mask; - - addr = (unsigned long) ptr; - /* calculate address for CS */ - addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3; - /* make AND mask */ - mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1))); - /* Do the atomic update. */ - __BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND); -} - -/* - * SMP safe change_bit routine based on compare and swap (CS) - */ -static inline void change_bit_cs(unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr, old, new, mask; - - addr = (unsigned long) ptr; - /* calculate address for CS */ - addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3; - /* make XOR mask */ - mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1)); - /* Do the atomic update. */ - __BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR); -} - -/* - * SMP safe test_and_set_bit routine based on compare and swap (CS) - */ -static inline int -test_and_set_bit_cs(unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr, old, new, mask; - - addr = (unsigned long) ptr; - /* calculate address for CS */ - addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3; - /* make OR/test mask */ - mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1)); - /* Do the atomic update. */ - __BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR); - __BITOPS_BARRIER(); - return (old & mask) != 0; -} - -/* - * SMP safe test_and_clear_bit routine based on compare and swap (CS) - */ -static inline int -test_and_clear_bit_cs(unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr, old, new, mask; - - addr = (unsigned long) ptr; - /* calculate address for CS */ - addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3; - /* make AND/test mask */ - mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1))); - /* Do the atomic update. */ - __BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND); - __BITOPS_BARRIER(); - return (old ^ new) != 0; -} - -/* - * SMP safe test_and_change_bit routine based on compare and swap (CS) - */ -static inline int -test_and_change_bit_cs(unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr, old, new, mask; - - addr = (unsigned long) ptr; - /* calculate address for CS */ - addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3; - /* make XOR/test mask */ - mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1)); - /* Do the atomic update. */ - __BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR); - __BITOPS_BARRIER(); - return (old & mask) != 0; -} -#endif /* CONFIG_SMP */ - -/* - * fast, non-SMP set_bit routine - */ -static inline void __set_bit(unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr; - - addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); - asm volatile( - " oc 0(1,%1),0(%2)" - : "=m" (*(char *) addr) : "a" (addr), - "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" ); -} - -static inline void -__constant_set_bit(const unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr; - - addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); - *(unsigned char *) addr |= 1 << (nr & 7); -} - -#define set_bit_simple(nr,addr) \ -(__builtin_constant_p((nr)) ? \ - __constant_set_bit((nr),(addr)) : \ - __set_bit((nr),(addr)) ) - -/* - * fast, non-SMP clear_bit routine - */ -static inline void -__clear_bit(unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr; - - addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); - asm volatile( - " nc 0(1,%1),0(%2)" - : "=m" (*(char *) addr) : "a" (addr), - "a" (_ni_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc"); -} - -static inline void -__constant_clear_bit(const unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr; - - addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); - *(unsigned char *) addr &= ~(1 << (nr & 7)); -} - -#define clear_bit_simple(nr,addr) \ -(__builtin_constant_p((nr)) ? \ - __constant_clear_bit((nr),(addr)) : \ - __clear_bit((nr),(addr)) ) - -/* - * fast, non-SMP change_bit routine - */ -static inline void __change_bit(unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr; - - addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); - asm volatile( - " xc 0(1,%1),0(%2)" - : "=m" (*(char *) addr) : "a" (addr), - "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" ); -} - -static inline void -__constant_change_bit(const unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr; - - addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); - *(unsigned char *) addr ^= 1 << (nr & 7); -} - -#define change_bit_simple(nr,addr) \ -(__builtin_constant_p((nr)) ? \ - __constant_change_bit((nr),(addr)) : \ - __change_bit((nr),(addr)) ) - -/* - * fast, non-SMP test_and_set_bit routine - */ -static inline int -test_and_set_bit_simple(unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr; - unsigned char ch; - - addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); - ch = *(unsigned char *) addr; - asm volatile( - " oc 0(1,%1),0(%2)" - : "=m" (*(char *) addr) - : "a" (addr), "a" (_oi_bitmap + (nr & 7)), - "m" (*(char *) addr) : "cc", "memory"); - return (ch >> (nr & 7)) & 1; -} -#define __test_and_set_bit(X,Y) test_and_set_bit_simple(X,Y) - -/* - * fast, non-SMP test_and_clear_bit routine - */ -static inline int -test_and_clear_bit_simple(unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr; - unsigned char ch; - - addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); - ch = *(unsigned char *) addr; - asm volatile( - " nc 0(1,%1),0(%2)" - : "=m" (*(char *) addr) - : "a" (addr), "a" (_ni_bitmap + (nr & 7)), - "m" (*(char *) addr) : "cc", "memory"); - return (ch >> (nr & 7)) & 1; -} -#define __test_and_clear_bit(X,Y) test_and_clear_bit_simple(X,Y) - -/* - * fast, non-SMP test_and_change_bit routine - */ -static inline int -test_and_change_bit_simple(unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr; - unsigned char ch; - - addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); - ch = *(unsigned char *) addr; - asm volatile( - " xc 0(1,%1),0(%2)" - : "=m" (*(char *) addr) - : "a" (addr), "a" (_oi_bitmap + (nr & 7)), - "m" (*(char *) addr) : "cc", "memory"); - return (ch >> (nr & 7)) & 1; -} -#define __test_and_change_bit(X,Y) test_and_change_bit_simple(X,Y) - -#ifdef CONFIG_SMP -#define set_bit set_bit_cs -#define clear_bit clear_bit_cs -#define change_bit change_bit_cs -#define test_and_set_bit test_and_set_bit_cs -#define test_and_clear_bit test_and_clear_bit_cs -#define test_and_change_bit test_and_change_bit_cs -#else -#define set_bit set_bit_simple -#define clear_bit clear_bit_simple -#define change_bit change_bit_simple -#define test_and_set_bit test_and_set_bit_simple -#define test_and_clear_bit test_and_clear_bit_simple -#define test_and_change_bit test_and_change_bit_simple -#endif - - -/* - * This routine doesn't need to be atomic. - */ - -static inline int __test_bit(unsigned long nr, const volatile unsigned long *ptr) -{ - unsigned long addr; - unsigned char ch; - - addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); - ch = *(volatile unsigned char *) addr; - return (ch >> (nr & 7)) & 1; -} - -static inline int -__constant_test_bit(unsigned long nr, const volatile unsigned long *addr) { - return (((volatile char *) addr) - [(nr^(__BITOPS_WORDSIZE-8))>>3] & (1<<(nr&7))) != 0; -} - -#define test_bit(nr,addr) \ -(__builtin_constant_p((nr)) ? \ - __constant_test_bit((nr),(addr)) : \ - __test_bit((nr),(addr)) ) - -/* - * Optimized find bit helper functions. - */ - -/** - * __ffz_word_loop - find byte offset of first long != -1UL - * @addr: pointer to array of unsigned long - * @size: size of the array in bits - */ -static inline unsigned long __ffz_word_loop(const unsigned long *addr, - unsigned long size) -{ - typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype; - unsigned long bytes = 0; - - asm volatile( -#ifndef __s390x__ - " ahi %1,-1\n" - " sra %1,5\n" - " jz 1f\n" - "0: c %2,0(%0,%3)\n" - " jne 1f\n" - " la %0,4(%0)\n" - " brct %1,0b\n" - "1:\n" -#else - " aghi %1,-1\n" - " srag %1,%1,6\n" - " jz 1f\n" - "0: cg %2,0(%0,%3)\n" - " jne 1f\n" - " la %0,8(%0)\n" - " brct %1,0b\n" - "1:\n" -#endif - : "+&a" (bytes), "+&d" (size) - : "d" (-1UL), "a" (addr), "m" (*(addrtype *) addr) - : "cc" ); - return bytes; -} - -/** - * __ffs_word_loop - find byte offset of first long != 0UL - * @addr: pointer to array of unsigned long - * @size: size of the array in bits - */ -static inline unsigned long __ffs_word_loop(const unsigned long *addr, - unsigned long size) -{ - typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype; - unsigned long bytes = 0; - - asm volatile( -#ifndef __s390x__ - " ahi %1,-1\n" - " sra %1,5\n" - " jz 1f\n" - "0: c %2,0(%0,%3)\n" - " jne 1f\n" - " la %0,4(%0)\n" - " brct %1,0b\n" - "1:\n" -#else - " aghi %1,-1\n" - " srag %1,%1,6\n" - " jz 1f\n" - "0: cg %2,0(%0,%3)\n" - " jne 1f\n" - " la %0,8(%0)\n" - " brct %1,0b\n" - "1:\n" -#endif - : "+&a" (bytes), "+&a" (size) - : "d" (0UL), "a" (addr), "m" (*(addrtype *) addr) - : "cc" ); - return bytes; -} - -/** - * __ffz_word - add number of the first unset bit - * @nr: base value the bit number is added to - * @word: the word that is searched for unset bits - */ -static inline unsigned long __ffz_word(unsigned long nr, unsigned long word) -{ -#ifdef __s390x__ - if (likely((word & 0xffffffff) == 0xffffffff)) { - word >>= 32; - nr += 32; - } -#endif - if (likely((word & 0xffff) == 0xffff)) { - word >>= 16; - nr += 16; - } - if (likely((word & 0xff) == 0xff)) { - word >>= 8; - nr += 8; - } - return nr + _zb_findmap[(unsigned char) word]; -} - -/** - * __ffs_word - add number of the first set bit - * @nr: base value the bit number is added to - * @word: the word that is searched for set bits - */ -static inline unsigned long __ffs_word(unsigned long nr, unsigned long word) -{ -#ifdef __s390x__ - if (likely((word & 0xffffffff) == 0)) { - word >>= 32; - nr += 32; - } -#endif - if (likely((word & 0xffff) == 0)) { - word >>= 16; - nr += 16; - } - if (likely((word & 0xff) == 0)) { - word >>= 8; - nr += 8; - } - return nr + _sb_findmap[(unsigned char) word]; -} - - -/** - * __load_ulong_be - load big endian unsigned long - * @p: pointer to array of unsigned long - * @offset: byte offset of source value in the array - */ -static inline unsigned long __load_ulong_be(const unsigned long *p, - unsigned long offset) -{ - p = (unsigned long *)((unsigned long) p + offset); - return *p; -} - -/** - * __load_ulong_le - load little endian unsigned long - * @p: pointer to array of unsigned long - * @offset: byte offset of source value in the array - */ -static inline unsigned long __load_ulong_le(const unsigned long *p, - unsigned long offset) -{ - unsigned long word; - - p = (unsigned long *)((unsigned long) p + offset); -#ifndef __s390x__ - asm volatile( - " ic %0,0(%1)\n" - " icm %0,2,1(%1)\n" - " icm %0,4,2(%1)\n" - " icm %0,8,3(%1)" - : "=&d" (word) : "a" (p), "m" (*p) : "cc"); -#else - asm volatile( - " lrvg %0,%1" - : "=d" (word) : "m" (*p) ); -#endif - return word; -} - -/* - * The various find bit functions. - */ - -/* - * ffz - find first zero in word. - * @word: The word to search - * - * Undefined if no zero exists, so code should check against ~0UL first. - */ -static inline unsigned long ffz(unsigned long word) -{ - return __ffz_word(0, word); -} - -/** - * __ffs - find first bit in word. - * @word: The word to search - * - * Undefined if no bit exists, so code should check against 0 first. - */ -static inline unsigned long __ffs (unsigned long word) -{ - return __ffs_word(0, word); -} - -/** - * ffs - find first bit set - * @x: the word to search - * - * This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ -static inline int ffs(int x) -{ - if (!x) - return 0; - return __ffs_word(1, x); -} - -/** - * find_first_zero_bit - find the first zero bit in a memory region - * @addr: The address to start the search at - * @size: The maximum size to search - * - * Returns the bit-number of the first zero bit, not the number of the byte - * containing a bit. - */ -static inline unsigned long find_first_zero_bit(const unsigned long *addr, - unsigned long size) -{ - unsigned long bytes, bits; - - if (!size) - return 0; - bytes = __ffz_word_loop(addr, size); - bits = __ffz_word(bytes*8, __load_ulong_be(addr, bytes)); - return (bits < size) ? bits : size; -} - -/** - * find_first_bit - find the first set bit in a memory region - * @addr: The address to start the search at - * @size: The maximum size to search - * - * Returns the bit-number of the first set bit, not the number of the byte - * containing a bit. - */ -static inline unsigned long find_first_bit(const unsigned long * addr, - unsigned long size) -{ - unsigned long bytes, bits; - - if (!size) - return 0; - bytes = __ffs_word_loop(addr, size); - bits = __ffs_word(bytes*8, __load_ulong_be(addr, bytes)); - return (bits < size) ? bits : size; -} - -/** - * find_next_zero_bit - find the first zero bit in a memory region - * @addr: The address to base the search on - * @offset: The bitnumber to start searching at - * @size: The maximum size to search - */ -static inline int find_next_zero_bit (const unsigned long * addr, - unsigned long size, - unsigned long offset) -{ - const unsigned long *p; - unsigned long bit, set; - - if (offset >= size) - return size; - bit = offset & (__BITOPS_WORDSIZE - 1); - offset -= bit; - size -= offset; - p = addr + offset / __BITOPS_WORDSIZE; - if (bit) { - /* - * __ffz_word returns __BITOPS_WORDSIZE - * if no zero bit is present in the word. - */ - set = __ffz_word(0, *p >> bit) + bit; - if (set >= size) - return size + offset; - if (set < __BITOPS_WORDSIZE) - return set + offset; - offset += __BITOPS_WORDSIZE; - size -= __BITOPS_WORDSIZE; - p++; - } - return offset + find_first_zero_bit(p, size); -} - -/** - * find_next_bit - find the first set bit in a memory region - * @addr: The address to base the search on - * @offset: The bitnumber to start searching at - * @size: The maximum size to search - */ -static inline int find_next_bit (const unsigned long * addr, - unsigned long size, - unsigned long offset) -{ - const unsigned long *p; - unsigned long bit, set; - - if (offset >= size) - return size; - bit = offset & (__BITOPS_WORDSIZE - 1); - offset -= bit; - size -= offset; - p = addr + offset / __BITOPS_WORDSIZE; - if (bit) { - /* - * __ffs_word returns __BITOPS_WORDSIZE - * if no one bit is present in the word. - */ - set = __ffs_word(0, *p & (~0UL << bit)); - if (set >= size) - return size + offset; - if (set < __BITOPS_WORDSIZE) - return set + offset; - offset += __BITOPS_WORDSIZE; - size -= __BITOPS_WORDSIZE; - p++; - } - return offset + find_first_bit(p, size); -} - -/* - * Every architecture must define this function. It's the fastest - * way of searching a 140-bit bitmap where the first 100 bits are - * unlikely to be set. It's guaranteed that at least one of the 140 - * bits is cleared. - */ -static inline int sched_find_first_bit(unsigned long *b) -{ - return find_first_bit(b, 140); -} - -#include -#include -#include - -#include -#include - -/* - * ATTENTION: intel byte ordering convention for ext2 and minix !! - * bit 0 is the LSB of addr; bit 31 is the MSB of addr; - * bit 32 is the LSB of (addr+4). - * That combined with the little endian byte order of Intel gives the - * following bit order in memory: - * 07 06 05 04 03 02 01 00 15 14 13 12 11 10 09 08 \ - * 23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24 - */ - -#define ext2_set_bit(nr, addr) \ - __test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr) -#define ext2_set_bit_atomic(lock, nr, addr) \ - test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr) -#define ext2_clear_bit(nr, addr) \ - __test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr) -#define ext2_clear_bit_atomic(lock, nr, addr) \ - test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr) -#define ext2_test_bit(nr, addr) \ - test_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr) - -static inline int ext2_find_first_zero_bit(void *vaddr, unsigned int size) -{ - unsigned long bytes, bits; - - if (!size) - return 0; - bytes = __ffz_word_loop(vaddr, size); - bits = __ffz_word(bytes*8, __load_ulong_le(vaddr, bytes)); - return (bits < size) ? bits : size; -} - -static inline int ext2_find_next_zero_bit(void *vaddr, unsigned long size, - unsigned long offset) -{ - unsigned long *addr = vaddr, *p; - unsigned long bit, set; - - if (offset >= size) - return size; - bit = offset & (__BITOPS_WORDSIZE - 1); - offset -= bit; - size -= offset; - p = addr + offset / __BITOPS_WORDSIZE; - if (bit) { - /* - * s390 version of ffz returns __BITOPS_WORDSIZE - * if no zero bit is present in the word. - */ - set = ffz(__load_ulong_le(p, 0) >> bit) + bit; - if (set >= size) - return size + offset; - if (set < __BITOPS_WORDSIZE) - return set + offset; - offset += __BITOPS_WORDSIZE; - size -= __BITOPS_WORDSIZE; - p++; - } - return offset + ext2_find_first_zero_bit(p, size); -} - -static inline unsigned long ext2_find_first_bit(void *vaddr, - unsigned long size) -{ - unsigned long bytes, bits; - - if (!size) - return 0; - bytes = __ffs_word_loop(vaddr, size); - bits = __ffs_word(bytes*8, __load_ulong_le(vaddr, bytes)); - return (bits < size) ? bits : size; -} - -static inline int ext2_find_next_bit(void *vaddr, unsigned long size, - unsigned long offset) -{ - unsigned long *addr = vaddr, *p; - unsigned long bit, set; - - if (offset >= size) - return size; - bit = offset & (__BITOPS_WORDSIZE - 1); - offset -= bit; - size -= offset; - p = addr + offset / __BITOPS_WORDSIZE; - if (bit) { - /* - * s390 version of ffz returns __BITOPS_WORDSIZE - * if no zero bit is present in the word. - */ - set = ffs(__load_ulong_le(p, 0) >> bit) + bit; - if (set >= size) - return size + offset; - if (set < __BITOPS_WORDSIZE) - return set + offset; - offset += __BITOPS_WORDSIZE; - size -= __BITOPS_WORDSIZE; - p++; - } - return offset + ext2_find_first_bit(p, size); -} - -#include - -#endif /* __KERNEL__ */ - -#endif /* _S390_BITOPS_H */ diff --git a/include/asm-s390/bug.h b/include/asm-s390/bug.h deleted file mode 100644 index 384e3621e341..000000000000 --- a/include/asm-s390/bug.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef _ASM_S390_BUG_H -#define _ASM_S390_BUG_H - -#include - -#ifdef CONFIG_BUG - -#ifdef CONFIG_64BIT -#define S390_LONG ".quad" -#else -#define S390_LONG ".long" -#endif - -#ifdef CONFIG_DEBUG_BUGVERBOSE - -#define __EMIT_BUG(x) do { \ - asm volatile( \ - "0: j 0b+2\n" \ - "1:\n" \ - ".section .rodata.str,\"aMS\",@progbits,1\n" \ - "2: .asciz \""__FILE__"\"\n" \ - ".previous\n" \ - ".section __bug_table,\"a\"\n" \ - "3:\t" S390_LONG "\t1b,2b\n" \ - " .short %0,%1\n" \ - " .org 3b+%2\n" \ - ".previous\n" \ - : : "i" (__LINE__), \ - "i" (x), \ - "i" (sizeof(struct bug_entry))); \ -} while (0) - -#else /* CONFIG_DEBUG_BUGVERBOSE */ - -#define __EMIT_BUG(x) do { \ - asm volatile( \ - "0: j 0b+2\n" \ - "1:\n" \ - ".section __bug_table,\"a\"\n" \ - "2:\t" S390_LONG "\t1b\n" \ - " .short %0\n" \ - " .org 2b+%1\n" \ - ".previous\n" \ - : : "i" (x), \ - "i" (sizeof(struct bug_entry))); \ -} while (0) - -#endif /* CONFIG_DEBUG_BUGVERBOSE */ - -#define BUG() __EMIT_BUG(0) - -#define WARN_ON(x) ({ \ - int __ret_warn_on = !!(x); \ - if (__builtin_constant_p(__ret_warn_on)) { \ - if (__ret_warn_on) \ - __EMIT_BUG(BUGFLAG_WARNING); \ - } else { \ - if (unlikely(__ret_warn_on)) \ - __EMIT_BUG(BUGFLAG_WARNING); \ - } \ - unlikely(__ret_warn_on); \ -}) - -#define HAVE_ARCH_BUG -#define HAVE_ARCH_WARN_ON -#endif /* CONFIG_BUG */ - -#include - -#endif /* _ASM_S390_BUG_H */ diff --git a/include/asm-s390/bugs.h b/include/asm-s390/bugs.h deleted file mode 100644 index 011f1e6a2a6c..000000000000 --- a/include/asm-s390/bugs.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-s390/bugs.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) - * - * Derived from "include/asm-i386/bugs.h" - * Copyright (C) 1994 Linus Torvalds - */ - -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - */ - -static inline void check_bugs(void) -{ - /* s390 has no bugs ... */ -} diff --git a/include/asm-s390/byteorder.h b/include/asm-s390/byteorder.h deleted file mode 100644 index 1fe2492baa8d..000000000000 --- a/include/asm-s390/byteorder.h +++ /dev/null @@ -1,125 +0,0 @@ -#ifndef _S390_BYTEORDER_H -#define _S390_BYTEORDER_H - -/* - * include/asm-s390/byteorder.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) - */ - -#include - -#ifdef __GNUC__ - -#ifdef __s390x__ -static inline __u64 ___arch__swab64p(const __u64 *x) -{ - __u64 result; - - asm volatile("lrvg %0,%1" : "=d" (result) : "m" (*x)); - return result; -} - -static inline __u64 ___arch__swab64(__u64 x) -{ - __u64 result; - - asm volatile("lrvgr %0,%1" : "=d" (result) : "d" (x)); - return result; -} - -static inline void ___arch__swab64s(__u64 *x) -{ - *x = ___arch__swab64p(x); -} -#endif /* __s390x__ */ - -static inline __u32 ___arch__swab32p(const __u32 *x) -{ - __u32 result; - - asm volatile( -#ifndef __s390x__ - " icm %0,8,3(%1)\n" - " icm %0,4,2(%1)\n" - " icm %0,2,1(%1)\n" - " ic %0,0(%1)" - : "=&d" (result) : "a" (x), "m" (*x) : "cc"); -#else /* __s390x__ */ - " lrv %0,%1" - : "=d" (result) : "m" (*x)); -#endif /* __s390x__ */ - return result; -} - -static inline __u32 ___arch__swab32(__u32 x) -{ -#ifndef __s390x__ - return ___arch__swab32p(&x); -#else /* __s390x__ */ - __u32 result; - - asm volatile("lrvr %0,%1" : "=d" (result) : "d" (x)); - return result; -#endif /* __s390x__ */ -} - -static __inline__ void ___arch__swab32s(__u32 *x) -{ - *x = ___arch__swab32p(x); -} - -static __inline__ __u16 ___arch__swab16p(const __u16 *x) -{ - __u16 result; - - asm volatile( -#ifndef __s390x__ - " icm %0,2,1(%1)\n" - " ic %0,0(%1)\n" - : "=&d" (result) : "a" (x), "m" (*x) : "cc"); -#else /* __s390x__ */ - " lrvh %0,%1" - : "=d" (result) : "m" (*x)); -#endif /* __s390x__ */ - return result; -} - -static __inline__ __u16 ___arch__swab16(__u16 x) -{ - return ___arch__swab16p(&x); -} - -static __inline__ void ___arch__swab16s(__u16 *x) -{ - *x = ___arch__swab16p(x); -} - -#ifdef __s390x__ -#define __arch__swab64(x) ___arch__swab64(x) -#define __arch__swab64p(x) ___arch__swab64p(x) -#define __arch__swab64s(x) ___arch__swab64s(x) -#endif /* __s390x__ */ -#define __arch__swab32(x) ___arch__swab32(x) -#define __arch__swab16(x) ___arch__swab16(x) -#define __arch__swab32p(x) ___arch__swab32p(x) -#define __arch__swab16p(x) ___arch__swab16p(x) -#define __arch__swab32s(x) ___arch__swab32s(x) -#define __arch__swab16s(x) ___arch__swab16s(x) - -#ifndef __s390x__ -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif -#else /* __s390x__ */ -#define __BYTEORDER_HAS_U64__ -#endif /* __s390x__ */ - -#endif /* __GNUC__ */ - -#include - -#endif /* _S390_BYTEORDER_H */ diff --git a/include/asm-s390/cache.h b/include/asm-s390/cache.h deleted file mode 100644 index 9b866816863c..000000000000 --- a/include/asm-s390/cache.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-s390/cache.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * - * Derived from "include/asm-i386/cache.h" - * Copyright (C) 1992, Linus Torvalds - */ - -#ifndef __ARCH_S390_CACHE_H -#define __ARCH_S390_CACHE_H - -#define L1_CACHE_BYTES 256 -#define L1_CACHE_SHIFT 8 - -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) - -#endif diff --git a/include/asm-s390/cacheflush.h b/include/asm-s390/cacheflush.h deleted file mode 100644 index 49d5af916d01..000000000000 --- a/include/asm-s390/cacheflush.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _S390_CACHEFLUSH_H -#define _S390_CACHEFLUSH_H - -/* Keep includes the same across arches. */ -#include - -/* Caches aren't brain-dead on the s390. */ -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -#ifdef CONFIG_DEBUG_PAGEALLOC -void kernel_map_pages(struct page *page, int numpages, int enable); -#endif - -#endif /* _S390_CACHEFLUSH_H */ diff --git a/include/asm-s390/ccwdev.h b/include/asm-s390/ccwdev.h deleted file mode 100644 index ba007d8df941..000000000000 --- a/include/asm-s390/ccwdev.h +++ /dev/null @@ -1,192 +0,0 @@ -/* - * include/asm-s390/ccwdev.h - * include/asm-s390x/ccwdev.h - * - * Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Arnd Bergmann - * - * Interface for CCW device drivers - */ -#ifndef _S390_CCWDEV_H_ -#define _S390_CCWDEV_H_ - -#include -#include -#include - -/* structs from asm/cio.h */ -struct irb; -struct ccw1; -struct ccw_dev_id; - -/* simplified initializers for struct ccw_device: - * CCW_DEVICE and CCW_DEVICE_DEVTYPE initialize one - * entry in your MODULE_DEVICE_TABLE and set the match_flag correctly */ -#define CCW_DEVICE(cu, cum) \ - .cu_type=(cu), .cu_model=(cum), \ - .match_flags=(CCW_DEVICE_ID_MATCH_CU_TYPE \ - | (cum ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0)) - -#define CCW_DEVICE_DEVTYPE(cu, cum, dev, devm) \ - .cu_type=(cu), .cu_model=(cum), .dev_type=(dev), .dev_model=(devm),\ - .match_flags=CCW_DEVICE_ID_MATCH_CU_TYPE \ - | ((cum) ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0) \ - | CCW_DEVICE_ID_MATCH_DEVICE_TYPE \ - | ((devm) ? CCW_DEVICE_ID_MATCH_DEVICE_MODEL : 0) - -/* scan through an array of device ids and return the first - * entry that matches the device. - * - * the array must end with an entry containing zero match_flags - */ -static inline const struct ccw_device_id * -ccw_device_id_match(const struct ccw_device_id *array, - const struct ccw_device_id *match) -{ - const struct ccw_device_id *id = array; - - for (id = array; id->match_flags; id++) { - if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_TYPE) - && (id->cu_type != match->cu_type)) - continue; - - if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_MODEL) - && (id->cu_model != match->cu_model)) - continue; - - if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_TYPE) - && (id->dev_type != match->dev_type)) - continue; - - if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_MODEL) - && (id->dev_model != match->dev_model)) - continue; - - return id; - } - - return NULL; -} - -/** - * struct ccw_device - channel attached device - * @ccwlock: pointer to device lock - * @id: id of this device - * @drv: ccw driver for this device - * @dev: embedded device structure - * @online: online status of device - * @handler: interrupt handler - * - * @handler is a member of the device rather than the driver since a driver - * can have different interrupt handlers for different ccw devices - * (multi-subchannel drivers). - */ -struct ccw_device { - spinlock_t *ccwlock; -/* private: */ - struct ccw_device_private *private; /* cio private information */ -/* public: */ - struct ccw_device_id id; - struct ccw_driver *drv; - struct device dev; - int online; - void (*handler) (struct ccw_device *, unsigned long, struct irb *); -}; - - -/** - * struct ccw driver - device driver for channel attached devices - * @owner: owning module - * @ids: ids supported by this driver - * @probe: function called on probe - * @remove: function called on remove - * @set_online: called when setting device online - * @set_offline: called when setting device offline - * @notify: notify driver of device state changes - * @shutdown: called at device shutdown - * @driver: embedded device driver structure - * @name: device driver name - */ -struct ccw_driver { - struct module *owner; - struct ccw_device_id *ids; - int (*probe) (struct ccw_device *); - void (*remove) (struct ccw_device *); - int (*set_online) (struct ccw_device *); - int (*set_offline) (struct ccw_device *); - int (*notify) (struct ccw_device *, int); - void (*shutdown) (struct ccw_device *); - struct device_driver driver; - char *name; -}; - -extern struct ccw_device *get_ccwdev_by_busid(struct ccw_driver *cdrv, - const char *bus_id); - -/* devices drivers call these during module load and unload. - * When a driver is registered, its probe method is called - * when new devices for its type pop up */ -extern int ccw_driver_register (struct ccw_driver *driver); -extern void ccw_driver_unregister (struct ccw_driver *driver); - -struct ccw1; - -extern int ccw_device_set_options_mask(struct ccw_device *, unsigned long); -extern int ccw_device_set_options(struct ccw_device *, unsigned long); -extern void ccw_device_clear_options(struct ccw_device *, unsigned long); - -/* Allow for i/o completion notification after primary interrupt status. */ -#define CCWDEV_EARLY_NOTIFICATION 0x0001 -/* Report all interrupt conditions. */ -#define CCWDEV_REPORT_ALL 0x0002 -/* Try to perform path grouping. */ -#define CCWDEV_DO_PATHGROUP 0x0004 -/* Allow forced onlining of boxed devices. */ -#define CCWDEV_ALLOW_FORCE 0x0008 - -extern int ccw_device_start(struct ccw_device *, struct ccw1 *, - unsigned long, __u8, unsigned long); -extern int ccw_device_start_timeout(struct ccw_device *, struct ccw1 *, - unsigned long, __u8, unsigned long, int); -extern int ccw_device_start_key(struct ccw_device *, struct ccw1 *, - unsigned long, __u8, __u8, unsigned long); -extern int ccw_device_start_timeout_key(struct ccw_device *, struct ccw1 *, - unsigned long, __u8, __u8, - unsigned long, int); - - -extern int ccw_device_resume(struct ccw_device *); -extern int ccw_device_halt(struct ccw_device *, unsigned long); -extern int ccw_device_clear(struct ccw_device *, unsigned long); -int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw, - unsigned long intparm, u8 lpm, u8 key); -int ccw_device_tm_start_key(struct ccw_device *, struct tcw *, - unsigned long, u8, u8); -int ccw_device_tm_start_timeout_key(struct ccw_device *, struct tcw *, - unsigned long, u8, u8, int); -int ccw_device_tm_start(struct ccw_device *, struct tcw *, - unsigned long, u8); -int ccw_device_tm_start_timeout(struct ccw_device *, struct tcw *, - unsigned long, u8, int); -int ccw_device_tm_intrg(struct ccw_device *cdev); - -extern int ccw_device_set_online(struct ccw_device *cdev); -extern int ccw_device_set_offline(struct ccw_device *cdev); - - -extern struct ciw *ccw_device_get_ciw(struct ccw_device *, __u32 cmd); -extern __u8 ccw_device_get_path_mask(struct ccw_device *); -extern void ccw_device_get_id(struct ccw_device *, struct ccw_dev_id *); - -#define get_ccwdev_lock(x) (x)->ccwlock - -#define to_ccwdev(n) container_of(n, struct ccw_device, dev) -#define to_ccwdrv(n) container_of(n, struct ccw_driver, driver) - -extern struct ccw_device *ccw_device_probe_console(void); - -// FIXME: these have to go -extern int _ccw_device_get_subchannel_number(struct ccw_device *); - -extern void *ccw_device_get_chp_desc(struct ccw_device *, int); -#endif /* _S390_CCWDEV_H_ */ diff --git a/include/asm-s390/ccwgroup.h b/include/asm-s390/ccwgroup.h deleted file mode 100644 index a27f68985a79..000000000000 --- a/include/asm-s390/ccwgroup.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef S390_CCWGROUP_H -#define S390_CCWGROUP_H - -struct ccw_device; -struct ccw_driver; - -/** - * struct ccwgroup_device - ccw group device - * @creator_id: unique number of the driver - * @state: online/offline state - * @count: number of attached slave devices - * @dev: embedded device structure - * @cdev: variable number of slave devices, allocated as needed - */ -struct ccwgroup_device { - unsigned long creator_id; - enum { - CCWGROUP_OFFLINE, - CCWGROUP_ONLINE, - } state; -/* private: */ - atomic_t onoff; - struct mutex reg_mutex; -/* public: */ - unsigned int count; - struct device dev; - struct ccw_device *cdev[0]; -}; - -/** - * struct ccwgroup_driver - driver for ccw group devices - * @owner: driver owner - * @name: driver name - * @max_slaves: maximum number of slave devices - * @driver_id: unique id - * @probe: function called on probe - * @remove: function called on remove - * @set_online: function called when device is set online - * @set_offline: function called when device is set offline - * @shutdown: function called when device is shut down - * @driver: embedded driver structure - */ -struct ccwgroup_driver { - struct module *owner; - char *name; - int max_slaves; - unsigned long driver_id; - - int (*probe) (struct ccwgroup_device *); - void (*remove) (struct ccwgroup_device *); - int (*set_online) (struct ccwgroup_device *); - int (*set_offline) (struct ccwgroup_device *); - void (*shutdown)(struct ccwgroup_device *); - - struct device_driver driver; -}; - -extern int ccwgroup_driver_register (struct ccwgroup_driver *cdriver); -extern void ccwgroup_driver_unregister (struct ccwgroup_driver *cdriver); -int ccwgroup_create_from_string(struct device *root, unsigned int creator_id, - struct ccw_driver *cdrv, int num_devices, - const char *buf); - -extern int ccwgroup_probe_ccwdev(struct ccw_device *cdev); -extern void ccwgroup_remove_ccwdev(struct ccw_device *cdev); - -#define to_ccwgroupdev(x) container_of((x), struct ccwgroup_device, dev) -#define to_ccwgroupdrv(x) container_of((x), struct ccwgroup_driver, driver) -#endif diff --git a/include/asm-s390/checksum.h b/include/asm-s390/checksum.h deleted file mode 100644 index d5a8e7c1477c..000000000000 --- a/include/asm-s390/checksum.h +++ /dev/null @@ -1,166 +0,0 @@ -#ifndef _S390_CHECKSUM_H -#define _S390_CHECKSUM_H - -/* - * include/asm-s390/checksum.h - * S390 fast network checksum routines - * see also arch/S390/lib/checksum.c - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Ulrich Hild (first version) - * Martin Schwidefsky (heavily optimized CKSM version) - * D.J. Barrow (third attempt) - */ - -#include - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -static inline __wsum -csum_partial(const void *buff, int len, __wsum sum) -{ - register unsigned long reg2 asm("2") = (unsigned long) buff; - register unsigned long reg3 asm("3") = (unsigned long) len; - - asm volatile( - "0: cksm %0,%1\n" /* do checksum on longs */ - " jo 0b\n" - : "+d" (sum), "+d" (reg2), "+d" (reg3) : : "cc", "memory"); - return sum; -} - -/* - * the same as csum_partial_copy, but copies from user space. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - * - * Copy from userspace and compute checksum. If we catch an exception - * then zero the rest of the buffer. - */ -static inline __wsum -csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, - int *err_ptr) -{ - int missing; - - missing = copy_from_user(dst, src, len); - if (missing) { - memset(dst + len - missing, 0, missing); - *err_ptr = -EFAULT; - } - - return csum_partial(dst, len, sum); -} - - -static inline __wsum -csum_partial_copy_nocheck (const void *src, void *dst, int len, __wsum sum) -{ - memcpy(dst,src,len); - return csum_partial(dst, len, sum); -} - -/* - * Fold a partial checksum without adding pseudo headers - */ -static inline __sum16 csum_fold(__wsum sum) -{ -#ifndef __s390x__ - register_pair rp; - - asm volatile( - " slr %N1,%N1\n" /* %0 = H L */ - " lr %1,%0\n" /* %0 = H L, %1 = H L 0 0 */ - " srdl %1,16\n" /* %0 = H L, %1 = 0 H L 0 */ - " alr %1,%N1\n" /* %0 = H L, %1 = L H L 0 */ - " alr %0,%1\n" /* %0 = H+L+C L+H */ - " srl %0,16\n" /* %0 = H+L+C */ - : "+&d" (sum), "=d" (rp) : : "cc"); -#else /* __s390x__ */ - asm volatile( - " sr 3,3\n" /* %0 = H*65536 + L */ - " lr 2,%0\n" /* %0 = H L, 2/3 = H L / 0 0 */ - " srdl 2,16\n" /* %0 = H L, 2/3 = 0 H / L 0 */ - " alr 2,3\n" /* %0 = H L, 2/3 = L H / L 0 */ - " alr %0,2\n" /* %0 = H+L+C L+H */ - " srl %0,16\n" /* %0 = H+L+C */ - : "+&d" (sum) : : "cc", "2", "3"); -#endif /* __s390x__ */ - return (__force __sum16) ~sum; -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - * - */ -static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - return csum_fold(csum_partial(iph, ihl*4, 0)); -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 32-bit checksum - */ -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, unsigned short proto, - __wsum sum) -{ - __u32 csum = (__force __u32)sum; - - csum += (__force __u32)saddr; - if (csum < (__force __u32)saddr) - csum++; - - csum += (__force __u32)daddr; - if (csum < (__force __u32)daddr) - csum++; - - csum += len + proto; - if (csum < len + proto) - csum++; - - return (__force __wsum)csum; -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ - -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -#endif /* _S390_CHECKSUM_H */ - - diff --git a/include/asm-s390/chpid.h b/include/asm-s390/chpid.h deleted file mode 100644 index dfe3c7f3439a..000000000000 --- a/include/asm-s390/chpid.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * drivers/s390/cio/chpid.h - * - * Copyright IBM Corp. 2007 - * Author(s): Peter Oberparleiter - */ - -#ifndef _ASM_S390_CHPID_H -#define _ASM_S390_CHPID_H _ASM_S390_CHPID_H - -#include -#include - -#define __MAX_CHPID 255 - -struct chp_id { - u8 reserved1; - u8 cssid; - u8 reserved2; - u8 id; -} __attribute__((packed)); - -#ifdef __KERNEL__ -#include - -static inline void chp_id_init(struct chp_id *chpid) -{ - memset(chpid, 0, sizeof(struct chp_id)); -} - -static inline int chp_id_is_equal(struct chp_id *a, struct chp_id *b) -{ - return (a->id == b->id) && (a->cssid == b->cssid); -} - -static inline void chp_id_next(struct chp_id *chpid) -{ - if (chpid->id < __MAX_CHPID) - chpid->id++; - else { - chpid->id = 0; - chpid->cssid++; - } -} - -static inline int chp_id_is_valid(struct chp_id *chpid) -{ - return (chpid->cssid <= __MAX_CSSID); -} - - -#define chp_id_for_each(c) \ - for (chp_id_init(c); chp_id_is_valid(c); chp_id_next(c)) -#endif /* __KERNEL */ - -#endif /* _ASM_S390_CHPID_H */ diff --git a/include/asm-s390/chsc.h b/include/asm-s390/chsc.h deleted file mode 100644 index d38d0cf62d4b..000000000000 --- a/include/asm-s390/chsc.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * ioctl interface for /dev/chsc - * - * Copyright 2008 IBM Corp. - * Author(s): Cornelia Huck - */ - -#ifndef _ASM_CHSC_H -#define _ASM_CHSC_H - -#include -#include - -struct chsc_async_header { - __u16 length; - __u16 code; - __u32 cmd_dependend; - __u32 key : 4; - __u32 : 28; - struct subchannel_id sid; -} __attribute__ ((packed)); - -struct chsc_async_area { - struct chsc_async_header header; - __u8 data[PAGE_SIZE - 16 /* size of chsc_async_header */]; -} __attribute__ ((packed)); - - -struct chsc_response_struct { - __u16 length; - __u16 code; - __u32 parms; - __u8 data[PAGE_SIZE - 8]; -} __attribute__ ((packed)); - -struct chsc_chp_cd { - struct chp_id chpid; - int m; - int fmt; - struct chsc_response_struct cpcb; -}; - -struct chsc_cu_cd { - __u16 cun; - __u8 cssid; - int m; - int fmt; - struct chsc_response_struct cucb; -}; - -struct chsc_sch_cud { - struct subchannel_id schid; - int fmt; - struct chsc_response_struct scub; -}; - -struct conf_id { - int m; - __u8 cssid; - __u8 ssid; -}; - -struct chsc_conf_info { - struct conf_id id; - int fmt; - struct chsc_response_struct scid; -}; - -struct ccl_parm_chpid { - int m; - struct chp_id chp; -}; - -struct ccl_parm_cssids { - __u8 f_cssid; - __u8 l_cssid; -}; - -struct chsc_comp_list { - struct { - enum { - CCL_CU_ON_CHP = 1, - CCL_CHP_TYPE_CAP = 2, - CCL_CSS_IMG = 4, - CCL_CSS_IMG_CONF_CHAR = 5, - CCL_IOP_CHP = 6, - } ctype; - int fmt; - struct ccl_parm_chpid chpid; - struct ccl_parm_cssids cssids; - } req; - struct chsc_response_struct sccl; -}; - -struct chsc_dcal { - struct { - enum { - DCAL_CSS_IID_PN = 4, - } atype; - __u32 list_parm[2]; - int fmt; - } req; - struct chsc_response_struct sdcal; -}; - -struct chsc_cpd_info { - struct chp_id chpid; - int m; - int fmt; - int rfmt; - int c; - struct chsc_response_struct chpdb; -}; - -#define CHSC_IOCTL_MAGIC 'c' - -#define CHSC_START _IOWR(CHSC_IOCTL_MAGIC, 0x81, struct chsc_async_area) -#define CHSC_INFO_CHANNEL_PATH _IOWR(CHSC_IOCTL_MAGIC, 0x82, \ - struct chsc_chp_cd) -#define CHSC_INFO_CU _IOWR(CHSC_IOCTL_MAGIC, 0x83, struct chsc_cu_cd) -#define CHSC_INFO_SCH_CU _IOWR(CHSC_IOCTL_MAGIC, 0x84, struct chsc_sch_cud) -#define CHSC_INFO_CI _IOWR(CHSC_IOCTL_MAGIC, 0x85, struct chsc_conf_info) -#define CHSC_INFO_CCL _IOWR(CHSC_IOCTL_MAGIC, 0x86, struct chsc_comp_list) -#define CHSC_INFO_CPD _IOWR(CHSC_IOCTL_MAGIC, 0x87, struct chsc_cpd_info) -#define CHSC_INFO_DCAL _IOWR(CHSC_IOCTL_MAGIC, 0x88, struct chsc_dcal) - -#endif diff --git a/include/asm-s390/cio.h b/include/asm-s390/cio.h deleted file mode 100644 index 6dccb071aec3..000000000000 --- a/include/asm-s390/cio.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - * include/asm-s390/cio.h - * include/asm-s390x/cio.h - * - * Common interface for I/O on S/390 - */ -#ifndef _ASM_S390_CIO_H_ -#define _ASM_S390_CIO_H_ - -#include -#include - -#ifdef __KERNEL__ - -#define LPM_ANYPATH 0xff -#define __MAX_CSSID 0 - -/** - * struct cmd_scsw - command-mode subchannel status word - * @key: subchannel key - * @sctl: suspend control - * @eswf: esw format - * @cc: deferred condition code - * @fmt: format - * @pfch: prefetch - * @isic: initial-status interruption control - * @alcc: address-limit checking control - * @ssi: suppress-suspended interruption - * @zcc: zero condition code - * @ectl: extended control - * @pno: path not operational - * @res: reserved - * @fctl: function control - * @actl: activity control - * @stctl: status control - * @cpa: channel program address - * @dstat: device status - * @cstat: subchannel status - * @count: residual count - */ -struct cmd_scsw { - __u32 key : 4; - __u32 sctl : 1; - __u32 eswf : 1; - __u32 cc : 2; - __u32 fmt : 1; - __u32 pfch : 1; - __u32 isic : 1; - __u32 alcc : 1; - __u32 ssi : 1; - __u32 zcc : 1; - __u32 ectl : 1; - __u32 pno : 1; - __u32 res : 1; - __u32 fctl : 3; - __u32 actl : 7; - __u32 stctl : 5; - __u32 cpa; - __u32 dstat : 8; - __u32 cstat : 8; - __u32 count : 16; -} __attribute__ ((packed)); - -/** - * struct tm_scsw - transport-mode subchannel status word - * @key: subchannel key - * @eswf: esw format - * @cc: deferred condition code - * @fmt: format - * @x: IRB-format control - * @q: interrogate-complete - * @ectl: extended control - * @pno: path not operational - * @fctl: function control - * @actl: activity control - * @stctl: status control - * @tcw: TCW address - * @dstat: device status - * @cstat: subchannel status - * @fcxs: FCX status - * @schxs: subchannel-extended status - */ -struct tm_scsw { - u32 key:4; - u32 :1; - u32 eswf:1; - u32 cc:2; - u32 fmt:3; - u32 x:1; - u32 q:1; - u32 :1; - u32 ectl:1; - u32 pno:1; - u32 :1; - u32 fctl:3; - u32 actl:7; - u32 stctl:5; - u32 tcw; - u32 dstat:8; - u32 cstat:8; - u32 fcxs:8; - u32 schxs:8; -} __attribute__ ((packed)); - -/** - * union scsw - subchannel status word - * @cmd: command-mode SCSW - * @tm: transport-mode SCSW - */ -union scsw { - struct cmd_scsw cmd; - struct tm_scsw tm; -} __attribute__ ((packed)); - -int scsw_is_tm(union scsw *scsw); -u32 scsw_key(union scsw *scsw); -u32 scsw_eswf(union scsw *scsw); -u32 scsw_cc(union scsw *scsw); -u32 scsw_ectl(union scsw *scsw); -u32 scsw_pno(union scsw *scsw); -u32 scsw_fctl(union scsw *scsw); -u32 scsw_actl(union scsw *scsw); -u32 scsw_stctl(union scsw *scsw); -u32 scsw_dstat(union scsw *scsw); -u32 scsw_cstat(union scsw *scsw); -int scsw_is_solicited(union scsw *scsw); -int scsw_is_valid_key(union scsw *scsw); -int scsw_is_valid_eswf(union scsw *scsw); -int scsw_is_valid_cc(union scsw *scsw); -int scsw_is_valid_ectl(union scsw *scsw); -int scsw_is_valid_pno(union scsw *scsw); -int scsw_is_valid_fctl(union scsw *scsw); -int scsw_is_valid_actl(union scsw *scsw); -int scsw_is_valid_stctl(union scsw *scsw); -int scsw_is_valid_dstat(union scsw *scsw); -int scsw_is_valid_cstat(union scsw *scsw); -int scsw_cmd_is_valid_key(union scsw *scsw); -int scsw_cmd_is_valid_sctl(union scsw *scsw); -int scsw_cmd_is_valid_eswf(union scsw *scsw); -int scsw_cmd_is_valid_cc(union scsw *scsw); -int scsw_cmd_is_valid_fmt(union scsw *scsw); -int scsw_cmd_is_valid_pfch(union scsw *scsw); -int scsw_cmd_is_valid_isic(union scsw *scsw); -int scsw_cmd_is_valid_alcc(union scsw *scsw); -int scsw_cmd_is_valid_ssi(union scsw *scsw); -int scsw_cmd_is_valid_zcc(union scsw *scsw); -int scsw_cmd_is_valid_ectl(union scsw *scsw); -int scsw_cmd_is_valid_pno(union scsw *scsw); -int scsw_cmd_is_valid_fctl(union scsw *scsw); -int scsw_cmd_is_valid_actl(union scsw *scsw); -int scsw_cmd_is_valid_stctl(union scsw *scsw); -int scsw_cmd_is_valid_dstat(union scsw *scsw); -int scsw_cmd_is_valid_cstat(union scsw *scsw); -int scsw_cmd_is_solicited(union scsw *scsw); -int scsw_tm_is_valid_key(union scsw *scsw); -int scsw_tm_is_valid_eswf(union scsw *scsw); -int scsw_tm_is_valid_cc(union scsw *scsw); -int scsw_tm_is_valid_fmt(union scsw *scsw); -int scsw_tm_is_valid_x(union scsw *scsw); -int scsw_tm_is_valid_q(union scsw *scsw); -int scsw_tm_is_valid_ectl(union scsw *scsw); -int scsw_tm_is_valid_pno(union scsw *scsw); -int scsw_tm_is_valid_fctl(union scsw *scsw); -int scsw_tm_is_valid_actl(union scsw *scsw); -int scsw_tm_is_valid_stctl(union scsw *scsw); -int scsw_tm_is_valid_dstat(union scsw *scsw); -int scsw_tm_is_valid_cstat(union scsw *scsw); -int scsw_tm_is_valid_fcxs(union scsw *scsw); -int scsw_tm_is_valid_schxs(union scsw *scsw); -int scsw_tm_is_solicited(union scsw *scsw); - -#define SCSW_FCTL_CLEAR_FUNC 0x1 -#define SCSW_FCTL_HALT_FUNC 0x2 -#define SCSW_FCTL_START_FUNC 0x4 - -#define SCSW_ACTL_SUSPENDED 0x1 -#define SCSW_ACTL_DEVACT 0x2 -#define SCSW_ACTL_SCHACT 0x4 -#define SCSW_ACTL_CLEAR_PEND 0x8 -#define SCSW_ACTL_HALT_PEND 0x10 -#define SCSW_ACTL_START_PEND 0x20 -#define SCSW_ACTL_RESUME_PEND 0x40 - -#define SCSW_STCTL_STATUS_PEND 0x1 -#define SCSW_STCTL_SEC_STATUS 0x2 -#define SCSW_STCTL_PRIM_STATUS 0x4 -#define SCSW_STCTL_INTER_STATUS 0x8 -#define SCSW_STCTL_ALERT_STATUS 0x10 - -#define DEV_STAT_ATTENTION 0x80 -#define DEV_STAT_STAT_MOD 0x40 -#define DEV_STAT_CU_END 0x20 -#define DEV_STAT_BUSY 0x10 -#define DEV_STAT_CHN_END 0x08 -#define DEV_STAT_DEV_END 0x04 -#define DEV_STAT_UNIT_CHECK 0x02 -#define DEV_STAT_UNIT_EXCEP 0x01 - -#define SCHN_STAT_PCI 0x80 -#define SCHN_STAT_INCORR_LEN 0x40 -#define SCHN_STAT_PROG_CHECK 0x20 -#define SCHN_STAT_PROT_CHECK 0x10 -#define SCHN_STAT_CHN_DATA_CHK 0x08 -#define SCHN_STAT_CHN_CTRL_CHK 0x04 -#define SCHN_STAT_INTF_CTRL_CHK 0x02 -#define SCHN_STAT_CHAIN_CHECK 0x01 - -/* - * architectured values for first sense byte - */ -#define SNS0_CMD_REJECT 0x80 -#define SNS_CMD_REJECT SNS0_CMD_REJEC -#define SNS0_INTERVENTION_REQ 0x40 -#define SNS0_BUS_OUT_CHECK 0x20 -#define SNS0_EQUIPMENT_CHECK 0x10 -#define SNS0_DATA_CHECK 0x08 -#define SNS0_OVERRUN 0x04 -#define SNS0_INCOMPL_DOMAIN 0x01 - -/* - * architectured values for second sense byte - */ -#define SNS1_PERM_ERR 0x80 -#define SNS1_INV_TRACK_FORMAT 0x40 -#define SNS1_EOC 0x20 -#define SNS1_MESSAGE_TO_OPER 0x10 -#define SNS1_NO_REC_FOUND 0x08 -#define SNS1_FILE_PROTECTED 0x04 -#define SNS1_WRITE_INHIBITED 0x02 -#define SNS1_INPRECISE_END 0x01 - -/* - * architectured values for third sense byte - */ -#define SNS2_REQ_INH_WRITE 0x80 -#define SNS2_CORRECTABLE 0x40 -#define SNS2_FIRST_LOG_ERR 0x20 -#define SNS2_ENV_DATA_PRESENT 0x10 -#define SNS2_INPRECISE_END 0x04 - -/** - * struct ccw1 - channel command word - * @cmd_code: command code - * @flags: flags, like IDA adressing, etc. - * @count: byte count - * @cda: data address - * - * The ccw is the basic structure to build channel programs that perform - * operations with the device or the control unit. Only Format-1 channel - * command words are supported. - */ -struct ccw1 { - __u8 cmd_code; - __u8 flags; - __u16 count; - __u32 cda; -} __attribute__ ((packed,aligned(8))); - -#define CCW_FLAG_DC 0x80 -#define CCW_FLAG_CC 0x40 -#define CCW_FLAG_SLI 0x20 -#define CCW_FLAG_SKIP 0x10 -#define CCW_FLAG_PCI 0x08 -#define CCW_FLAG_IDA 0x04 -#define CCW_FLAG_SUSPEND 0x02 - -#define CCW_CMD_READ_IPL 0x02 -#define CCW_CMD_NOOP 0x03 -#define CCW_CMD_BASIC_SENSE 0x04 -#define CCW_CMD_TIC 0x08 -#define CCW_CMD_STLCK 0x14 -#define CCW_CMD_SENSE_PGID 0x34 -#define CCW_CMD_SUSPEND_RECONN 0x5B -#define CCW_CMD_RDC 0x64 -#define CCW_CMD_RELEASE 0x94 -#define CCW_CMD_SET_PGID 0xAF -#define CCW_CMD_SENSE_ID 0xE4 -#define CCW_CMD_DCTL 0xF3 - -#define SENSE_MAX_COUNT 0x20 - -/** - * struct erw - extended report word - * @res0: reserved - * @auth: authorization check - * @pvrf: path-verification-required flag - * @cpt: channel-path timeout - * @fsavf: failing storage address validity flag - * @cons: concurrent sense - * @scavf: secondary ccw address validity flag - * @fsaf: failing storage address format - * @scnt: sense count, if @cons == %1 - * @res16: reserved - */ -struct erw { - __u32 res0 : 3; - __u32 auth : 1; - __u32 pvrf : 1; - __u32 cpt : 1; - __u32 fsavf : 1; - __u32 cons : 1; - __u32 scavf : 1; - __u32 fsaf : 1; - __u32 scnt : 6; - __u32 res16 : 16; -} __attribute__ ((packed)); - -/** - * struct sublog - subchannel logout area - * @res0: reserved - * @esf: extended status flags - * @lpum: last path used mask - * @arep: ancillary report - * @fvf: field-validity flags - * @sacc: storage access code - * @termc: termination code - * @devsc: device-status check - * @serr: secondary error - * @ioerr: i/o-error alert - * @seqc: sequence code - */ -struct sublog { - __u32 res0 : 1; - __u32 esf : 7; - __u32 lpum : 8; - __u32 arep : 1; - __u32 fvf : 5; - __u32 sacc : 2; - __u32 termc : 2; - __u32 devsc : 1; - __u32 serr : 1; - __u32 ioerr : 1; - __u32 seqc : 3; -} __attribute__ ((packed)); - -/** - * struct esw0 - Format 0 Extended Status Word (ESW) - * @sublog: subchannel logout - * @erw: extended report word - * @faddr: failing storage address - * @saddr: secondary ccw address - */ -struct esw0 { - struct sublog sublog; - struct erw erw; - __u32 faddr[2]; - __u32 saddr; -} __attribute__ ((packed)); - -/** - * struct esw1 - Format 1 Extended Status Word (ESW) - * @zero0: reserved zeros - * @lpum: last path used mask - * @zero16: reserved zeros - * @erw: extended report word - * @zeros: three fullwords of zeros - */ -struct esw1 { - __u8 zero0; - __u8 lpum; - __u16 zero16; - struct erw erw; - __u32 zeros[3]; -} __attribute__ ((packed)); - -/** - * struct esw2 - Format 2 Extended Status Word (ESW) - * @zero0: reserved zeros - * @lpum: last path used mask - * @dcti: device-connect-time interval - * @erw: extended report word - * @zeros: three fullwords of zeros - */ -struct esw2 { - __u8 zero0; - __u8 lpum; - __u16 dcti; - struct erw erw; - __u32 zeros[3]; -} __attribute__ ((packed)); - -/** - * struct esw3 - Format 3 Extended Status Word (ESW) - * @zero0: reserved zeros - * @lpum: last path used mask - * @res: reserved - * @erw: extended report word - * @zeros: three fullwords of zeros - */ -struct esw3 { - __u8 zero0; - __u8 lpum; - __u16 res; - struct erw erw; - __u32 zeros[3]; -} __attribute__ ((packed)); - -/** - * struct irb - interruption response block - * @scsw: subchannel status word - * @esw: extened status word, 4 formats - * @ecw: extended control word - * - * The irb that is handed to the device driver when an interrupt occurs. For - * solicited interrupts, the common I/O layer already performs checks whether - * a field is valid; a field not being valid is always passed as %0. - * If a unit check occured, @ecw may contain sense data; this is retrieved - * by the common I/O layer itself if the device doesn't support concurrent - * sense (so that the device driver never needs to perform basic sene itself). - * For unsolicited interrupts, the irb is passed as-is (expect for sense data, - * if applicable). - */ -struct irb { - union scsw scsw; - union { - struct esw0 esw0; - struct esw1 esw1; - struct esw2 esw2; - struct esw3 esw3; - } esw; - __u8 ecw[32]; -} __attribute__ ((packed,aligned(4))); - -/** - * struct ciw - command information word (CIW) layout - * @et: entry type - * @reserved: reserved bits - * @ct: command type - * @cmd: command code - * @count: command count - */ -struct ciw { - __u32 et : 2; - __u32 reserved : 2; - __u32 ct : 4; - __u32 cmd : 8; - __u32 count : 16; -} __attribute__ ((packed)); - -#define CIW_TYPE_RCD 0x0 /* read configuration data */ -#define CIW_TYPE_SII 0x1 /* set interface identifier */ -#define CIW_TYPE_RNI 0x2 /* read node identifier */ - -/* - * Flags used as input parameters for do_IO() - */ -#define DOIO_ALLOW_SUSPEND 0x0001 /* allow for channel prog. suspend */ -#define DOIO_DENY_PREFETCH 0x0002 /* don't allow for CCW prefetch */ -#define DOIO_SUPPRESS_INTER 0x0004 /* suppress intermediate inter. */ - /* ... for suspended CCWs */ -/* Device or subchannel gone. */ -#define CIO_GONE 0x0001 -/* No path to device. */ -#define CIO_NO_PATH 0x0002 -/* Device has appeared. */ -#define CIO_OPER 0x0004 -/* Sick revalidation of device. */ -#define CIO_REVALIDATE 0x0008 - -/** - * struct ccw_dev_id - unique identifier for ccw devices - * @ssid: subchannel set id - * @devno: device number - * - * This structure is not directly based on any hardware structure. The - * hardware identifies a device by its device number and its subchannel, - * which is in turn identified by its id. In order to get a unique identifier - * for ccw devices across subchannel sets, @struct ccw_dev_id has been - * introduced. - */ -struct ccw_dev_id { - u8 ssid; - u16 devno; -}; - -/** - * ccw_device_id_is_equal() - compare two ccw_dev_ids - * @dev_id1: a ccw_dev_id - * @dev_id2: another ccw_dev_id - * Returns: - * %1 if the two structures are equal field-by-field, - * %0 if not. - * Context: - * any - */ -static inline int ccw_dev_id_is_equal(struct ccw_dev_id *dev_id1, - struct ccw_dev_id *dev_id2) -{ - if ((dev_id1->ssid == dev_id2->ssid) && - (dev_id1->devno == dev_id2->devno)) - return 1; - return 0; -} - -extern void wait_cons_dev(void); - -extern void css_schedule_reprobe(void); - -extern void reipl_ccw_dev(struct ccw_dev_id *id); - -struct cio_iplinfo { - u16 devno; - int is_qdio; -}; - -extern int cio_get_iplinfo(struct cio_iplinfo *iplinfo); - -/* Function from drivers/s390/cio/chsc.c */ -int chsc_sstpc(void *page, unsigned int op, u16 ctrl); -int chsc_sstpi(void *page, void *result, size_t size); - -#endif - -#endif diff --git a/include/asm-s390/cmb.h b/include/asm-s390/cmb.h deleted file mode 100644 index 50196857d27a..000000000000 --- a/include/asm-s390/cmb.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef S390_CMB_H -#define S390_CMB_H -/** - * struct cmbdata - channel measurement block data for user space - * @size: size of the stored data - * @elapsed_time: time since last sampling - * @ssch_rsch_count: number of ssch and rsch - * @sample_count: number of samples - * @device_connect_time: time of device connect - * @function_pending_time: time of function pending - * @device_disconnect_time: time of device disconnect - * @control_unit_queuing_time: time of control unit queuing - * @device_active_only_time: time of device active only - * @device_busy_time: time of device busy (ext. format) - * @initial_command_response_time: initial command response time (ext. format) - * - * All values are stored as 64 bit for simplicity, especially - * in 32 bit emulation mode. All time values are normalized to - * nanoseconds. - * Currently, two formats are known, which differ by the size of - * this structure, i.e. the last two members are only set when - * the extended channel measurement facility (first shipped in - * z990 machines) is activated. - * Potentially, more fields could be added, which would result in a - * new ioctl number. - */ -struct cmbdata { - __u64 size; - __u64 elapsed_time; - /* basic and exended format: */ - __u64 ssch_rsch_count; - __u64 sample_count; - __u64 device_connect_time; - __u64 function_pending_time; - __u64 device_disconnect_time; - __u64 control_unit_queuing_time; - __u64 device_active_only_time; - /* extended format only: */ - __u64 device_busy_time; - __u64 initial_command_response_time; -}; - -/* enable channel measurement */ -#define BIODASDCMFENABLE _IO(DASD_IOCTL_LETTER, 32) -/* enable channel measurement */ -#define BIODASDCMFDISABLE _IO(DASD_IOCTL_LETTER, 33) -/* read channel measurement data */ -#define BIODASDREADALLCMB _IOWR(DASD_IOCTL_LETTER, 33, struct cmbdata) - -#ifdef __KERNEL__ -struct ccw_device; -extern int enable_cmf(struct ccw_device *cdev); -extern int disable_cmf(struct ccw_device *cdev); -extern u64 cmf_read(struct ccw_device *cdev, int index); -extern int cmf_readall(struct ccw_device *cdev, struct cmbdata *data); - -#endif /* __KERNEL__ */ -#endif /* S390_CMB_H */ diff --git a/include/asm-s390/compat.h b/include/asm-s390/compat.h deleted file mode 100644 index de065b32381a..000000000000 --- a/include/asm-s390/compat.h +++ /dev/null @@ -1,233 +0,0 @@ -#ifndef _ASM_S390X_COMPAT_H -#define _ASM_S390X_COMPAT_H -/* - * Architecture specific compatibility types - */ -#include -#include - -#define PSW32_MASK_PER 0x40000000UL -#define PSW32_MASK_DAT 0x04000000UL -#define PSW32_MASK_IO 0x02000000UL -#define PSW32_MASK_EXT 0x01000000UL -#define PSW32_MASK_KEY 0x00F00000UL -#define PSW32_MASK_MCHECK 0x00040000UL -#define PSW32_MASK_WAIT 0x00020000UL -#define PSW32_MASK_PSTATE 0x00010000UL -#define PSW32_MASK_ASC 0x0000C000UL -#define PSW32_MASK_CC 0x00003000UL -#define PSW32_MASK_PM 0x00000f00UL - -#define PSW32_ADDR_AMODE31 0x80000000UL -#define PSW32_ADDR_INSN 0x7FFFFFFFUL - -#define PSW32_BASE_BITS 0x00080000UL - -#define PSW32_ASC_PRIMARY 0x00000000UL -#define PSW32_ASC_ACCREG 0x00004000UL -#define PSW32_ASC_SECONDARY 0x00008000UL -#define PSW32_ASC_HOME 0x0000C000UL - -#define PSW32_MASK_MERGE(CURRENT,NEW) \ - (((CURRENT) & ~(PSW32_MASK_CC|PSW32_MASK_PM)) | \ - ((NEW) & (PSW32_MASK_CC|PSW32_MASK_PM))) - -extern long psw32_user_bits; - -#define COMPAT_USER_HZ 100 - -typedef u32 compat_size_t; -typedef s32 compat_ssize_t; -typedef s32 compat_time_t; -typedef s32 compat_clock_t; -typedef s32 compat_pid_t; -typedef u16 __compat_uid_t; -typedef u16 __compat_gid_t; -typedef u32 __compat_uid32_t; -typedef u32 __compat_gid32_t; -typedef u16 compat_mode_t; -typedef u32 compat_ino_t; -typedef u16 compat_dev_t; -typedef s32 compat_off_t; -typedef s64 compat_loff_t; -typedef u16 compat_nlink_t; -typedef u16 compat_ipc_pid_t; -typedef s32 compat_daddr_t; -typedef u32 compat_caddr_t; -typedef __kernel_fsid_t compat_fsid_t; -typedef s32 compat_key_t; -typedef s32 compat_timer_t; - -typedef s32 compat_int_t; -typedef s32 compat_long_t; -typedef s64 compat_s64; -typedef u32 compat_uint_t; -typedef u32 compat_ulong_t; -typedef u64 compat_u64; - -struct compat_timespec { - compat_time_t tv_sec; - s32 tv_nsec; -}; - -struct compat_timeval { - compat_time_t tv_sec; - s32 tv_usec; -}; - -struct compat_stat { - compat_dev_t st_dev; - u16 __pad1; - compat_ino_t st_ino; - compat_mode_t st_mode; - compat_nlink_t st_nlink; - __compat_uid_t st_uid; - __compat_gid_t st_gid; - compat_dev_t st_rdev; - u16 __pad2; - u32 st_size; - u32 st_blksize; - u32 st_blocks; - u32 st_atime; - u32 st_atime_nsec; - u32 st_mtime; - u32 st_mtime_nsec; - u32 st_ctime; - u32 st_ctime_nsec; - u32 __unused4; - u32 __unused5; -}; - -struct compat_flock { - short l_type; - short l_whence; - compat_off_t l_start; - compat_off_t l_len; - compat_pid_t l_pid; -}; - -#define F_GETLK64 12 -#define F_SETLK64 13 -#define F_SETLKW64 14 - -struct compat_flock64 { - short l_type; - short l_whence; - compat_loff_t l_start; - compat_loff_t l_len; - compat_pid_t l_pid; -}; - -struct compat_statfs { - s32 f_type; - s32 f_bsize; - s32 f_blocks; - s32 f_bfree; - s32 f_bavail; - s32 f_files; - s32 f_ffree; - compat_fsid_t f_fsid; - s32 f_namelen; - s32 f_frsize; - s32 f_spare[6]; -}; - -#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff -#define COMPAT_RLIM_INFINITY 0xffffffff - -typedef u32 compat_old_sigset_t; /* at least 32 bits */ - -#define _COMPAT_NSIG 64 -#define _COMPAT_NSIG_BPW 32 - -typedef u32 compat_sigset_word; - -#define COMPAT_OFF_T_MAX 0x7fffffff -#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL - -/* - * A pointer passed in from user mode. This should not - * be used for syscall parameters, just declare them - * as pointers because the syscall entry code will have - * appropriately converted them already. - */ -typedef u32 compat_uptr_t; - -static inline void __user *compat_ptr(compat_uptr_t uptr) -{ - return (void __user *)(unsigned long)(uptr & 0x7fffffffUL); -} - -static inline compat_uptr_t ptr_to_compat(void __user *uptr) -{ - return (u32)(unsigned long)uptr; -} - -static inline void __user *compat_alloc_user_space(long len) -{ - unsigned long stack; - - stack = KSTK_ESP(current); - if (test_thread_flag(TIF_31BIT)) - stack &= 0x7fffffffUL; - return (void __user *) (stack - len); -} - -struct compat_ipc64_perm { - compat_key_t key; - __compat_uid32_t uid; - __compat_gid32_t gid; - __compat_uid32_t cuid; - __compat_gid32_t cgid; - compat_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned int __unused1; - unsigned int __unused2; -}; - -struct compat_semid64_ds { - struct compat_ipc64_perm sem_perm; - compat_time_t sem_otime; - compat_ulong_t __pad1; - compat_time_t sem_ctime; - compat_ulong_t __pad2; - compat_ulong_t sem_nsems; - compat_ulong_t __unused1; - compat_ulong_t __unused2; -}; - -struct compat_msqid64_ds { - struct compat_ipc64_perm msg_perm; - compat_time_t msg_stime; - compat_ulong_t __pad1; - compat_time_t msg_rtime; - compat_ulong_t __pad2; - compat_time_t msg_ctime; - compat_ulong_t __pad3; - compat_ulong_t msg_cbytes; - compat_ulong_t msg_qnum; - compat_ulong_t msg_qbytes; - compat_pid_t msg_lspid; - compat_pid_t msg_lrpid; - compat_ulong_t __unused1; - compat_ulong_t __unused2; -}; - -struct compat_shmid64_ds { - struct compat_ipc64_perm shm_perm; - compat_size_t shm_segsz; - compat_time_t shm_atime; - compat_ulong_t __pad1; - compat_time_t shm_dtime; - compat_ulong_t __pad2; - compat_time_t shm_ctime; - compat_ulong_t __pad3; - compat_pid_t shm_cpid; - compat_pid_t shm_lpid; - compat_ulong_t shm_nattch; - compat_ulong_t __unused1; - compat_ulong_t __unused2; -}; -#endif /* _ASM_S390X_COMPAT_H */ diff --git a/include/asm-s390/cpcmd.h b/include/asm-s390/cpcmd.h deleted file mode 100644 index 48a9eab16429..000000000000 --- a/include/asm-s390/cpcmd.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/s390/kernel/cpcmd.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - * Christian Borntraeger (cborntra@de.ibm.com), - */ - -#ifndef _ASM_S390_CPCMD_H -#define _ASM_S390_CPCMD_H - -/* - * the lowlevel function for cpcmd - * the caller of __cpcmd has to ensure that the response buffer is below 2 GB - */ -extern int __cpcmd(const char *cmd, char *response, int rlen, int *response_code); - -/* - * cpcmd is the in-kernel interface for issuing CP commands - * - * cmd: null-terminated command string, max 240 characters - * response: response buffer for VM's textual response - * rlen: size of the response buffer, cpcmd will not exceed this size - * but will cap the output, if its too large. Everything that - * did not fit into the buffer will be silently dropped - * response_code: return pointer for VM's error code - * return value: the size of the response. The caller can check if the buffer - * was large enough by comparing the return value and rlen - * NOTE: If the response buffer is not below 2 GB, cpcmd can sleep - */ -extern int cpcmd(const char *cmd, char *response, int rlen, int *response_code); - -#endif /* _ASM_S390_CPCMD_H */ diff --git a/include/asm-s390/cpu.h b/include/asm-s390/cpu.h deleted file mode 100644 index e5a6a9ba3adf..000000000000 --- a/include/asm-s390/cpu.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-s390/cpu.h - * - * Copyright IBM Corp. 2007 - * Author(s): Heiko Carstens - */ - -#ifndef _ASM_S390_CPU_H_ -#define _ASM_S390_CPU_H_ - -#include -#include -#include - -struct s390_idle_data { - spinlock_t lock; - unsigned int in_idle; - unsigned long long idle_count; - unsigned long long idle_enter; - unsigned long long idle_time; -}; - -DECLARE_PER_CPU(struct s390_idle_data, s390_idle); - -void s390_idle_leave(void); - -static inline void s390_idle_check(void) -{ - if ((&__get_cpu_var(s390_idle))->in_idle) - s390_idle_leave(); -} - -#endif /* _ASM_S390_CPU_H_ */ diff --git a/include/asm-s390/cputime.h b/include/asm-s390/cputime.h deleted file mode 100644 index 133ce054fc89..000000000000 --- a/include/asm-s390/cputime.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - * include/asm-s390/cputime.h - * - * (C) Copyright IBM Corp. 2004 - * - * Author: Martin Schwidefsky - */ - -#ifndef _S390_CPUTIME_H -#define _S390_CPUTIME_H - -#include - -/* We want to use micro-second resolution. */ - -typedef unsigned long long cputime_t; -typedef unsigned long long cputime64_t; - -#ifndef __s390x__ - -static inline unsigned int -__div(unsigned long long n, unsigned int base) -{ - register_pair rp; - - rp.pair = n >> 1; - asm ("dr %0,%1" : "+d" (rp) : "d" (base >> 1)); - return rp.subreg.odd; -} - -#else /* __s390x__ */ - -static inline unsigned int -__div(unsigned long long n, unsigned int base) -{ - return n / base; -} - -#endif /* __s390x__ */ - -#define cputime_zero (0ULL) -#define cputime_max ((~0UL >> 1) - 1) -#define cputime_add(__a, __b) ((__a) + (__b)) -#define cputime_sub(__a, __b) ((__a) - (__b)) -#define cputime_div(__a, __n) ({ \ - unsigned long long __div = (__a); \ - do_div(__div,__n); \ - __div; \ -}) -#define cputime_halve(__a) ((__a) >> 1) -#define cputime_eq(__a, __b) ((__a) == (__b)) -#define cputime_gt(__a, __b) ((__a) > (__b)) -#define cputime_ge(__a, __b) ((__a) >= (__b)) -#define cputime_lt(__a, __b) ((__a) < (__b)) -#define cputime_le(__a, __b) ((__a) <= (__b)) -#define cputime_to_jiffies(__ct) (__div((__ct), 1000000 / HZ)) -#define cputime_to_scaled(__ct) (__ct) -#define jiffies_to_cputime(__hz) ((cputime_t)(__hz) * (1000000 / HZ)) - -#define cputime64_zero (0ULL) -#define cputime64_add(__a, __b) ((__a) + (__b)) -#define cputime_to_cputime64(__ct) (__ct) - -static inline u64 -cputime64_to_jiffies64(cputime64_t cputime) -{ - do_div(cputime, 1000000 / HZ); - return cputime; -} - -/* - * Convert cputime to milliseconds and back. - */ -static inline unsigned int -cputime_to_msecs(const cputime_t cputime) -{ - return __div(cputime, 1000); -} - -static inline cputime_t -msecs_to_cputime(const unsigned int m) -{ - return (cputime_t) m * 1000; -} - -/* - * Convert cputime to milliseconds and back. - */ -static inline unsigned int -cputime_to_secs(const cputime_t cputime) -{ - return __div(cputime, 1000000); -} - -static inline cputime_t -secs_to_cputime(const unsigned int s) -{ - return (cputime_t) s * 1000000; -} - -/* - * Convert cputime to timespec and back. - */ -static inline cputime_t -timespec_to_cputime(const struct timespec *value) -{ - return value->tv_nsec / 1000 + (u64) value->tv_sec * 1000000; -} - -static inline void -cputime_to_timespec(const cputime_t cputime, struct timespec *value) -{ -#ifndef __s390x__ - register_pair rp; - - rp.pair = cputime >> 1; - asm ("dr %0,%1" : "+d" (rp) : "d" (1000000 >> 1)); - value->tv_nsec = rp.subreg.even * 1000; - value->tv_sec = rp.subreg.odd; -#else - value->tv_nsec = (cputime % 1000000) * 1000; - value->tv_sec = cputime / 1000000; -#endif -} - -/* - * Convert cputime to timeval and back. - * Since cputime and timeval have the same resolution (microseconds) - * this is easy. - */ -static inline cputime_t -timeval_to_cputime(const struct timeval *value) -{ - return value->tv_usec + (u64) value->tv_sec * 1000000; -} - -static inline void -cputime_to_timeval(const cputime_t cputime, struct timeval *value) -{ -#ifndef __s390x__ - register_pair rp; - - rp.pair = cputime >> 1; - asm ("dr %0,%1" : "+d" (rp) : "d" (1000000 >> 1)); - value->tv_usec = rp.subreg.even; - value->tv_sec = rp.subreg.odd; -#else - value->tv_usec = cputime % 1000000; - value->tv_sec = cputime / 1000000; -#endif -} - -/* - * Convert cputime to clock and back. - */ -static inline clock_t -cputime_to_clock_t(cputime_t cputime) -{ - return __div(cputime, 1000000 / USER_HZ); -} - -static inline cputime_t -clock_t_to_cputime(unsigned long x) -{ - return (cputime_t) x * (1000000 / USER_HZ); -} - -/* - * Convert cputime64 to clock. - */ -static inline clock_t -cputime64_to_clock_t(cputime64_t cputime) -{ - return __div(cputime, 1000000 / USER_HZ); -} - -#endif /* _S390_CPUTIME_H */ diff --git a/include/asm-s390/current.h b/include/asm-s390/current.h deleted file mode 100644 index 83cf36cde2da..000000000000 --- a/include/asm-s390/current.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * include/asm-s390/current.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) - * - * Derived from "include/asm-i386/current.h" - */ - -#ifndef _S390_CURRENT_H -#define _S390_CURRENT_H - -#ifdef __KERNEL__ -#include - -struct task_struct; - -#define current ((struct task_struct *const)S390_lowcore.current_task) - -#endif - -#endif /* !(_S390_CURRENT_H) */ diff --git a/include/asm-s390/dasd.h b/include/asm-s390/dasd.h deleted file mode 100644 index 3f002e13d024..000000000000 --- a/include/asm-s390/dasd.h +++ /dev/null @@ -1,270 +0,0 @@ -/* - * File...........: linux/drivers/s390/block/dasd.c - * Author(s)......: Holger Smolinski - * Bugreports.to..: - * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000 - * - * This file is the interface of the DASD device driver, which is exported to user space - * any future changes wrt the API will result in a change of the APIVERSION reported - * to userspace by the DASDAPIVER-ioctl - * - */ - -#ifndef DASD_H -#define DASD_H -#include - -#define DASD_IOCTL_LETTER 'D' - -#define DASD_API_VERSION 6 - -/* - * struct dasd_information2_t - * represents any data about the device, which is visible to userspace. - * including foramt and featueres. - */ -typedef struct dasd_information2_t { - unsigned int devno; /* S/390 devno */ - unsigned int real_devno; /* for aliases */ - unsigned int schid; /* S/390 subchannel identifier */ - unsigned int cu_type : 16; /* from SenseID */ - unsigned int cu_model : 8; /* from SenseID */ - unsigned int dev_type : 16; /* from SenseID */ - unsigned int dev_model : 8; /* from SenseID */ - unsigned int open_count; - unsigned int req_queue_len; - unsigned int chanq_len; /* length of chanq */ - char type[4]; /* from discipline.name, 'none' for unknown */ - unsigned int status; /* current device level */ - unsigned int label_block; /* where to find the VOLSER */ - unsigned int FBA_layout; /* fixed block size (like AIXVOL) */ - unsigned int characteristics_size; - unsigned int confdata_size; - char characteristics[64]; /* from read_device_characteristics */ - char configuration_data[256]; /* from read_configuration_data */ - unsigned int format; /* format info like formatted/cdl/ldl/... */ - unsigned int features; /* dasd features like 'ro',... */ - unsigned int reserved0; /* reserved for further use ,... */ - unsigned int reserved1; /* reserved for further use ,... */ - unsigned int reserved2; /* reserved for further use ,... */ - unsigned int reserved3; /* reserved for further use ,... */ - unsigned int reserved4; /* reserved for further use ,... */ - unsigned int reserved5; /* reserved for further use ,... */ - unsigned int reserved6; /* reserved for further use ,... */ - unsigned int reserved7; /* reserved for further use ,... */ -} dasd_information2_t; - -/* - * values to be used for dasd_information_t.format - * 0x00: NOT formatted - * 0x01: Linux disc layout - * 0x02: Common disc layout - */ -#define DASD_FORMAT_NONE 0 -#define DASD_FORMAT_LDL 1 -#define DASD_FORMAT_CDL 2 -/* - * values to be used for dasd_information_t.features - * 0x00: default features - * 0x01: readonly (ro) - * 0x02: use diag discipline (diag) - * 0x04: set the device initially online (internal use only) - * 0x08: enable ERP related logging - */ -#define DASD_FEATURE_DEFAULT 0x00 -#define DASD_FEATURE_READONLY 0x01 -#define DASD_FEATURE_USEDIAG 0x02 -#define DASD_FEATURE_INITIAL_ONLINE 0x04 -#define DASD_FEATURE_ERPLOG 0x08 - -#define DASD_PARTN_BITS 2 - -/* - * struct dasd_information_t - * represents any data about the data, which is visible to userspace - */ -typedef struct dasd_information_t { - unsigned int devno; /* S/390 devno */ - unsigned int real_devno; /* for aliases */ - unsigned int schid; /* S/390 subchannel identifier */ - unsigned int cu_type : 16; /* from SenseID */ - unsigned int cu_model : 8; /* from SenseID */ - unsigned int dev_type : 16; /* from SenseID */ - unsigned int dev_model : 8; /* from SenseID */ - unsigned int open_count; - unsigned int req_queue_len; - unsigned int chanq_len; /* length of chanq */ - char type[4]; /* from discipline.name, 'none' for unknown */ - unsigned int status; /* current device level */ - unsigned int label_block; /* where to find the VOLSER */ - unsigned int FBA_layout; /* fixed block size (like AIXVOL) */ - unsigned int characteristics_size; - unsigned int confdata_size; - char characteristics[64]; /* from read_device_characteristics */ - char configuration_data[256]; /* from read_configuration_data */ -} dasd_information_t; - -/* - * Read Subsystem Data - Performance Statistics - */ -typedef struct dasd_rssd_perf_stats_t { - unsigned char invalid:1; - unsigned char format:3; - unsigned char data_format:4; - unsigned char unit_address; - unsigned short device_status; - unsigned int nr_read_normal; - unsigned int nr_read_normal_hits; - unsigned int nr_write_normal; - unsigned int nr_write_fast_normal_hits; - unsigned int nr_read_seq; - unsigned int nr_read_seq_hits; - unsigned int nr_write_seq; - unsigned int nr_write_fast_seq_hits; - unsigned int nr_read_cache; - unsigned int nr_read_cache_hits; - unsigned int nr_write_cache; - unsigned int nr_write_fast_cache_hits; - unsigned int nr_inhibit_cache; - unsigned int nr_bybass_cache; - unsigned int nr_seq_dasd_to_cache; - unsigned int nr_dasd_to_cache; - unsigned int nr_cache_to_dasd; - unsigned int nr_delayed_fast_write; - unsigned int nr_normal_fast_write; - unsigned int nr_seq_fast_write; - unsigned int nr_cache_miss; - unsigned char status2; - unsigned int nr_quick_write_promotes; - unsigned char reserved; - unsigned short ssid; - unsigned char reseved2[96]; -} __attribute__((packed)) dasd_rssd_perf_stats_t; - -/* - * struct profile_info_t - * holds the profinling information - */ -typedef struct dasd_profile_info_t { - unsigned int dasd_io_reqs; /* number of requests processed at all */ - unsigned int dasd_io_sects; /* number of sectors processed at all */ - unsigned int dasd_io_secs[32]; /* histogram of request's sizes */ - unsigned int dasd_io_times[32]; /* histogram of requests's times */ - unsigned int dasd_io_timps[32]; /* histogram of requests's times per sector */ - unsigned int dasd_io_time1[32]; /* histogram of time from build to start */ - unsigned int dasd_io_time2[32]; /* histogram of time from start to irq */ - unsigned int dasd_io_time2ps[32]; /* histogram of time from start to irq */ - unsigned int dasd_io_time3[32]; /* histogram of time from irq to end */ - unsigned int dasd_io_nr_req[32]; /* histogram of # of requests in chanq */ -} dasd_profile_info_t; - -/* - * struct format_data_t - * represents all data necessary to format a dasd - */ -typedef struct format_data_t { - int start_unit; /* from track */ - int stop_unit; /* to track */ - int blksize; /* sectorsize */ - int intensity; -} format_data_t; - -/* - * values to be used for format_data_t.intensity - * 0/8: normal format - * 1/9: also write record zero - * 3/11: also write home address - * 4/12: invalidate track - */ -#define DASD_FMT_INT_FMT_R0 1 /* write record zero */ -#define DASD_FMT_INT_FMT_HA 2 /* write home address, also set FMT_R0 ! */ -#define DASD_FMT_INT_INVAL 4 /* invalidate tracks */ -#define DASD_FMT_INT_COMPAT 8 /* use OS/390 compatible disk layout */ - - -/* - * struct attrib_data_t - * represents the operation (cache) bits for the device. - * Used in DE to influence caching of the DASD. - */ -typedef struct attrib_data_t { - unsigned char operation:3; /* cache operation mode */ - unsigned char reserved:5; /* cache operation mode */ - __u16 nr_cyl; /* no of cyliners for read ahaed */ - __u8 reserved2[29]; /* for future use */ -} __attribute__ ((packed)) attrib_data_t; - -/* definition of operation (cache) bits within attributes of DE */ -#define DASD_NORMAL_CACHE 0x0 -#define DASD_BYPASS_CACHE 0x1 -#define DASD_INHIBIT_LOAD 0x2 -#define DASD_SEQ_ACCESS 0x3 -#define DASD_SEQ_PRESTAGE 0x4 -#define DASD_REC_ACCESS 0x5 - - -/******************************************************************************** - * SECTION: Definition of IOCTLs - * - * Here ist how the ioctl-nr should be used: - * 0 - 31 DASD driver itself - * 32 - 239 still open - * 240 - 255 reserved for EMC - *******************************************************************************/ - -/* Disable the volume (for Linux) */ -#define BIODASDDISABLE _IO(DASD_IOCTL_LETTER,0) -/* Enable the volume (for Linux) */ -#define BIODASDENABLE _IO(DASD_IOCTL_LETTER,1) -/* Issue a reserve/release command, rsp. */ -#define BIODASDRSRV _IO(DASD_IOCTL_LETTER,2) /* reserve */ -#define BIODASDRLSE _IO(DASD_IOCTL_LETTER,3) /* release */ -#define BIODASDSLCK _IO(DASD_IOCTL_LETTER,4) /* steal lock */ -/* reset profiling information of a device */ -#define BIODASDPRRST _IO(DASD_IOCTL_LETTER,5) -/* Quiesce IO on device */ -#define BIODASDQUIESCE _IO(DASD_IOCTL_LETTER,6) -/* Resume IO on device */ -#define BIODASDRESUME _IO(DASD_IOCTL_LETTER,7) - - -/* retrieve API version number */ -#define DASDAPIVER _IOR(DASD_IOCTL_LETTER,0,int) -/* Get information on a dasd device */ -#define BIODASDINFO _IOR(DASD_IOCTL_LETTER,1,dasd_information_t) -/* retrieve profiling information of a device */ -#define BIODASDPRRD _IOR(DASD_IOCTL_LETTER,2,dasd_profile_info_t) -/* Get information on a dasd device (enhanced) */ -#define BIODASDINFO2 _IOR(DASD_IOCTL_LETTER,3,dasd_information2_t) -/* Performance Statistics Read */ -#define BIODASDPSRD _IOR(DASD_IOCTL_LETTER,4,dasd_rssd_perf_stats_t) -/* Get Attributes (cache operations) */ -#define BIODASDGATTR _IOR(DASD_IOCTL_LETTER,5,attrib_data_t) - - -/* #define BIODASDFORMAT _IOW(IOCTL_LETTER,0,format_data_t) , deprecated */ -#define BIODASDFMT _IOW(DASD_IOCTL_LETTER,1,format_data_t) -/* Set Attributes (cache operations) */ -#define BIODASDSATTR _IOW(DASD_IOCTL_LETTER,2,attrib_data_t) - - -#endif /* DASD_H */ - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-indent-level: 4 - * c-brace-imaginary-offset: 0 - * c-brace-offset: -4 - * c-argdecl-indent: 4 - * c-label-offset: -4 - * c-continued-statement-offset: 4 - * c-continued-brace-offset: 0 - * indent-tabs-mode: nil - * tab-width: 8 - * End: - */ diff --git a/include/asm-s390/debug.h b/include/asm-s390/debug.h deleted file mode 100644 index 9450ce6e32de..000000000000 --- a/include/asm-s390/debug.h +++ /dev/null @@ -1,261 +0,0 @@ -/* - * include/asm-s390/debug.h - * S/390 debug facility - * - * Copyright (C) 1999, 2000 IBM Deutschland Entwicklung GmbH, - * IBM Corporation - */ - -#ifndef DEBUG_H -#define DEBUG_H - -#include - -/* Note: - * struct __debug_entry must be defined outside of #ifdef __KERNEL__ - * in order to allow a user program to analyze the 'raw'-view. - */ - -struct __debug_entry{ - union { - struct { - unsigned long long clock:52; - unsigned long long exception:1; - unsigned long long level:3; - unsigned long long cpuid:8; - } fields; - - unsigned long long stck; - } id; - void* caller; -} __attribute__((packed)); - - -#define __DEBUG_FEATURE_VERSION 2 /* version of debug feature */ - -#ifdef __KERNEL__ -#include -#include -#include -#include - -#define DEBUG_MAX_LEVEL 6 /* debug levels range from 0 to 6 */ -#define DEBUG_OFF_LEVEL -1 /* level where debug is switched off */ -#define DEBUG_FLUSH_ALL -1 /* parameter to flush all areas */ -#define DEBUG_MAX_VIEWS 10 /* max number of views in proc fs */ -#define DEBUG_MAX_NAME_LEN 64 /* max length for a debugfs file name */ -#define DEBUG_DEFAULT_LEVEL 3 /* initial debug level */ - -#define DEBUG_DIR_ROOT "s390dbf" /* name of debug root directory in proc fs */ - -#define DEBUG_DATA(entry) (char*)(entry + 1) /* data is stored behind */ - /* the entry information */ - -typedef struct __debug_entry debug_entry_t; - -struct debug_view; - -typedef struct debug_info { - struct debug_info* next; - struct debug_info* prev; - atomic_t ref_count; - spinlock_t lock; - int level; - int nr_areas; - int pages_per_area; - int buf_size; - int entry_size; - debug_entry_t*** areas; - int active_area; - int *active_pages; - int *active_entries; - struct dentry* debugfs_root_entry; - struct dentry* debugfs_entries[DEBUG_MAX_VIEWS]; - struct debug_view* views[DEBUG_MAX_VIEWS]; - char name[DEBUG_MAX_NAME_LEN]; - mode_t mode; -} debug_info_t; - -typedef int (debug_header_proc_t) (debug_info_t* id, - struct debug_view* view, - int area, - debug_entry_t* entry, - char* out_buf); - -typedef int (debug_format_proc_t) (debug_info_t* id, - struct debug_view* view, char* out_buf, - const char* in_buf); -typedef int (debug_prolog_proc_t) (debug_info_t* id, - struct debug_view* view, - char* out_buf); -typedef int (debug_input_proc_t) (debug_info_t* id, - struct debug_view* view, - struct file* file, - const char __user *user_buf, - size_t in_buf_size, loff_t* offset); - -int debug_dflt_header_fn(debug_info_t* id, struct debug_view* view, - int area, debug_entry_t* entry, char* out_buf); - -struct debug_view { - char name[DEBUG_MAX_NAME_LEN]; - debug_prolog_proc_t* prolog_proc; - debug_header_proc_t* header_proc; - debug_format_proc_t* format_proc; - debug_input_proc_t* input_proc; - void* private_data; -}; - -extern struct debug_view debug_hex_ascii_view; -extern struct debug_view debug_raw_view; -extern struct debug_view debug_sprintf_view; - -/* do NOT use the _common functions */ - -debug_entry_t* debug_event_common(debug_info_t* id, int level, - const void* data, int length); - -debug_entry_t* debug_exception_common(debug_info_t* id, int level, - const void* data, int length); - -/* Debug Feature API: */ - -debug_info_t *debug_register(const char *name, int pages, int nr_areas, - int buf_size); - -debug_info_t *debug_register_mode(const char *name, int pages, int nr_areas, - int buf_size, mode_t mode, uid_t uid, - gid_t gid); - -void debug_unregister(debug_info_t* id); - -void debug_set_level(debug_info_t* id, int new_level); - -void debug_stop_all(void); - -static inline debug_entry_t* -debug_event(debug_info_t* id, int level, void* data, int length) -{ - if ((!id) || (level > id->level) || (id->pages_per_area == 0)) - return NULL; - return debug_event_common(id,level,data,length); -} - -static inline debug_entry_t* -debug_int_event(debug_info_t* id, int level, unsigned int tag) -{ - unsigned int t=tag; - if ((!id) || (level > id->level) || (id->pages_per_area == 0)) - return NULL; - return debug_event_common(id,level,&t,sizeof(unsigned int)); -} - -static inline debug_entry_t * -debug_long_event (debug_info_t* id, int level, unsigned long tag) -{ - unsigned long t=tag; - if ((!id) || (level > id->level) || (id->pages_per_area == 0)) - return NULL; - return debug_event_common(id,level,&t,sizeof(unsigned long)); -} - -static inline debug_entry_t* -debug_text_event(debug_info_t* id, int level, const char* txt) -{ - if ((!id) || (level > id->level) || (id->pages_per_area == 0)) - return NULL; - return debug_event_common(id,level,txt,strlen(txt)); -} - -extern debug_entry_t * -debug_sprintf_event(debug_info_t* id,int level,char *string,...) - __attribute__ ((format(printf, 3, 4))); - - -static inline debug_entry_t* -debug_exception(debug_info_t* id, int level, void* data, int length) -{ - if ((!id) || (level > id->level) || (id->pages_per_area == 0)) - return NULL; - return debug_exception_common(id,level,data,length); -} - -static inline debug_entry_t* -debug_int_exception(debug_info_t* id, int level, unsigned int tag) -{ - unsigned int t=tag; - if ((!id) || (level > id->level) || (id->pages_per_area == 0)) - return NULL; - return debug_exception_common(id,level,&t,sizeof(unsigned int)); -} - -static inline debug_entry_t * -debug_long_exception (debug_info_t* id, int level, unsigned long tag) -{ - unsigned long t=tag; - if ((!id) || (level > id->level) || (id->pages_per_area == 0)) - return NULL; - return debug_exception_common(id,level,&t,sizeof(unsigned long)); -} - -static inline debug_entry_t* -debug_text_exception(debug_info_t* id, int level, const char* txt) -{ - if ((!id) || (level > id->level) || (id->pages_per_area == 0)) - return NULL; - return debug_exception_common(id,level,txt,strlen(txt)); -} - - -extern debug_entry_t * -debug_sprintf_exception(debug_info_t* id,int level,char *string,...) - __attribute__ ((format(printf, 3, 4))); - -int debug_register_view(debug_info_t* id, struct debug_view* view); -int debug_unregister_view(debug_info_t* id, struct debug_view* view); - -/* - define the debug levels: - - 0 No debugging output to console or syslog - - 1 Log internal errors to syslog, ignore check conditions - - 2 Log internal errors and check conditions to syslog - - 3 Log internal errors to console, log check conditions to syslog - - 4 Log internal errors and check conditions to console - - 5 panic on internal errors, log check conditions to console - - 6 panic on both, internal errors and check conditions - */ - -#ifndef DEBUG_LEVEL -#define DEBUG_LEVEL 4 -#endif - -#define INTERNAL_ERRMSG(x,y...) "E" __FILE__ "%d: " x, __LINE__, y -#define INTERNAL_WRNMSG(x,y...) "W" __FILE__ "%d: " x, __LINE__, y -#define INTERNAL_INFMSG(x,y...) "I" __FILE__ "%d: " x, __LINE__, y -#define INTERNAL_DEBMSG(x,y...) "D" __FILE__ "%d: " x, __LINE__, y - -#if DEBUG_LEVEL > 0 -#define PRINT_DEBUG(x...) printk ( KERN_DEBUG PRINTK_HEADER x ) -#define PRINT_INFO(x...) printk ( KERN_INFO PRINTK_HEADER x ) -#define PRINT_WARN(x...) printk ( KERN_WARNING PRINTK_HEADER x ) -#define PRINT_ERR(x...) printk ( KERN_ERR PRINTK_HEADER x ) -#define PRINT_FATAL(x...) panic ( PRINTK_HEADER x ) -#else -#define PRINT_DEBUG(x...) printk ( KERN_DEBUG PRINTK_HEADER x ) -#define PRINT_INFO(x...) printk ( KERN_DEBUG PRINTK_HEADER x ) -#define PRINT_WARN(x...) printk ( KERN_DEBUG PRINTK_HEADER x ) -#define PRINT_ERR(x...) printk ( KERN_DEBUG PRINTK_HEADER x ) -#define PRINT_FATAL(x...) printk ( KERN_DEBUG PRINTK_HEADER x ) -#endif /* DASD_DEBUG */ - -#undef DEBUG_MALLOC -#ifdef DEBUG_MALLOC -void *b; -#define kmalloc(x...) (PRINT_INFO(" kmalloc %p\n",b=kmalloc(x)),b) -#define kfree(x) PRINT_INFO(" kfree %p\n",x);kfree(x) -#define get_zeroed_page(x...) (PRINT_INFO(" gfp %p\n",b=get_zeroed_page(x)),b) -#define __get_free_pages(x...) (PRINT_INFO(" gfps %p\n",b=__get_free_pages(x)),b) -#endif /* DEBUG_MALLOC */ - -#endif /* __KERNEL__ */ -#endif /* DEBUG_H */ diff --git a/include/asm-s390/delay.h b/include/asm-s390/delay.h deleted file mode 100644 index 78357314c450..000000000000 --- a/include/asm-s390/delay.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-s390/delay.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) - * - * Derived from "include/asm-i386/delay.h" - * Copyright (C) 1993 Linus Torvalds - * - * Delay routines calling functions in arch/s390/lib/delay.c - */ - -#ifndef _S390_DELAY_H -#define _S390_DELAY_H - -extern void __udelay(unsigned long usecs); -extern void __delay(unsigned long loops); - -#define udelay(n) __udelay(n) - -#endif /* defined(_S390_DELAY_H) */ diff --git a/include/asm-s390/device.h b/include/asm-s390/device.h deleted file mode 100644 index d8f9872b0e2d..000000000000 --- a/include/asm-s390/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/include/asm-s390/diag.h b/include/asm-s390/diag.h deleted file mode 100644 index 72b2e2f2d32d..000000000000 --- a/include/asm-s390/diag.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * s390 diagnose functions - * - * Copyright IBM Corp. 2007 - * Author(s): Michael Holzheu - */ - -#ifndef _ASM_S390_DIAG_H -#define _ASM_S390_DIAG_H - -/* - * Diagnose 10: Release pages - */ -extern void diag10(unsigned long addr); - -/* - * Diagnose 14: Input spool file manipulation - */ -extern int diag14(unsigned long rx, unsigned long ry1, unsigned long subcode); - -/* - * Diagnose 210: Get information about a virtual device - */ -struct diag210 { - u16 vrdcdvno; /* device number (input) */ - u16 vrdclen; /* data block length (input) */ - u8 vrdcvcla; /* virtual device class (output) */ - u8 vrdcvtyp; /* virtual device type (output) */ - u8 vrdcvsta; /* virtual device status (output) */ - u8 vrdcvfla; /* virtual device flags (output) */ - u8 vrdcrccl; /* real device class (output) */ - u8 vrdccrty; /* real device type (output) */ - u8 vrdccrmd; /* real device model (output) */ - u8 vrdccrft; /* real device feature (output) */ -} __attribute__((packed, aligned(4))); - -extern int diag210(struct diag210 *addr); - -#endif /* _ASM_S390_DIAG_H */ diff --git a/include/asm-s390/div64.h b/include/asm-s390/div64.h deleted file mode 100644 index 6cd978cefb28..000000000000 --- a/include/asm-s390/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-s390/dma.h b/include/asm-s390/dma.h deleted file mode 100644 index 7425c6af6cd4..000000000000 --- a/include/asm-s390/dma.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-s390/dma.h - * - * S390 version - */ - -#ifndef _ASM_DMA_H -#define _ASM_DMA_H - -#include /* need byte IO */ - -#define MAX_DMA_ADDRESS 0x80000000 - -#define free_dma(x) do { } while (0) - -#endif /* _ASM_DMA_H */ diff --git a/include/asm-s390/ebcdic.h b/include/asm-s390/ebcdic.h deleted file mode 100644 index 7f6f641d32f4..000000000000 --- a/include/asm-s390/ebcdic.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * include/asm-s390/ebcdic.h - * EBCDIC -> ASCII, ASCII -> EBCDIC conversion routines. - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky - */ - -#ifndef _EBCDIC_H -#define _EBCDIC_H - -#ifndef _S390_TYPES_H -#include -#endif - -extern __u8 _ascebc_500[256]; /* ASCII -> EBCDIC 500 conversion table */ -extern __u8 _ebcasc_500[256]; /* EBCDIC 500 -> ASCII conversion table */ -extern __u8 _ascebc[256]; /* ASCII -> EBCDIC conversion table */ -extern __u8 _ebcasc[256]; /* EBCDIC -> ASCII conversion table */ -extern __u8 _ebc_tolower[256]; /* EBCDIC -> lowercase */ -extern __u8 _ebc_toupper[256]; /* EBCDIC -> uppercase */ - -static inline void -codepage_convert(const __u8 *codepage, volatile __u8 * addr, unsigned long nr) -{ - if (nr-- <= 0) - return; - asm volatile( - " bras 1,1f\n" - " tr 0(1,%0),0(%2)\n" - "0: tr 0(256,%0),0(%2)\n" - " la %0,256(%0)\n" - "1: ahi %1,-256\n" - " jnm 0b\n" - " ex %1,0(1)" - : "+&a" (addr), "+&a" (nr) - : "a" (codepage) : "cc", "memory", "1"); -} - -#define ASCEBC(addr,nr) codepage_convert(_ascebc, addr, nr) -#define EBCASC(addr,nr) codepage_convert(_ebcasc, addr, nr) -#define ASCEBC_500(addr,nr) codepage_convert(_ascebc_500, addr, nr) -#define EBCASC_500(addr,nr) codepage_convert(_ebcasc_500, addr, nr) -#define EBC_TOLOWER(addr,nr) codepage_convert(_ebc_tolower, addr, nr) -#define EBC_TOUPPER(addr,nr) codepage_convert(_ebc_toupper, addr, nr) - -#endif - diff --git a/include/asm-s390/elf.h b/include/asm-s390/elf.h deleted file mode 100644 index 3cad56923815..000000000000 --- a/include/asm-s390/elf.h +++ /dev/null @@ -1,196 +0,0 @@ -/* - * include/asm-s390/elf.h - * - * S390 version - * - * Derived from "include/asm-i386/elf.h" - */ - -#ifndef __ASMS390_ELF_H -#define __ASMS390_ELF_H - -/* s390 relocations defined by the ABIs */ -#define R_390_NONE 0 /* No reloc. */ -#define R_390_8 1 /* Direct 8 bit. */ -#define R_390_12 2 /* Direct 12 bit. */ -#define R_390_16 3 /* Direct 16 bit. */ -#define R_390_32 4 /* Direct 32 bit. */ -#define R_390_PC32 5 /* PC relative 32 bit. */ -#define R_390_GOT12 6 /* 12 bit GOT offset. */ -#define R_390_GOT32 7 /* 32 bit GOT offset. */ -#define R_390_PLT32 8 /* 32 bit PC relative PLT address. */ -#define R_390_COPY 9 /* Copy symbol at runtime. */ -#define R_390_GLOB_DAT 10 /* Create GOT entry. */ -#define R_390_JMP_SLOT 11 /* Create PLT entry. */ -#define R_390_RELATIVE 12 /* Adjust by program base. */ -#define R_390_GOTOFF32 13 /* 32 bit offset to GOT. */ -#define R_390_GOTPC 14 /* 32 bit PC rel. offset to GOT. */ -#define R_390_GOT16 15 /* 16 bit GOT offset. */ -#define R_390_PC16 16 /* PC relative 16 bit. */ -#define R_390_PC16DBL 17 /* PC relative 16 bit shifted by 1. */ -#define R_390_PLT16DBL 18 /* 16 bit PC rel. PLT shifted by 1. */ -#define R_390_PC32DBL 19 /* PC relative 32 bit shifted by 1. */ -#define R_390_PLT32DBL 20 /* 32 bit PC rel. PLT shifted by 1. */ -#define R_390_GOTPCDBL 21 /* 32 bit PC rel. GOT shifted by 1. */ -#define R_390_64 22 /* Direct 64 bit. */ -#define R_390_PC64 23 /* PC relative 64 bit. */ -#define R_390_GOT64 24 /* 64 bit GOT offset. */ -#define R_390_PLT64 25 /* 64 bit PC relative PLT address. */ -#define R_390_GOTENT 26 /* 32 bit PC rel. to GOT entry >> 1. */ -#define R_390_GOTOFF16 27 /* 16 bit offset to GOT. */ -#define R_390_GOTOFF64 28 /* 64 bit offset to GOT. */ -#define R_390_GOTPLT12 29 /* 12 bit offset to jump slot. */ -#define R_390_GOTPLT16 30 /* 16 bit offset to jump slot. */ -#define R_390_GOTPLT32 31 /* 32 bit offset to jump slot. */ -#define R_390_GOTPLT64 32 /* 64 bit offset to jump slot. */ -#define R_390_GOTPLTENT 33 /* 32 bit rel. offset to jump slot. */ -#define R_390_PLTOFF16 34 /* 16 bit offset from GOT to PLT. */ -#define R_390_PLTOFF32 35 /* 32 bit offset from GOT to PLT. */ -#define R_390_PLTOFF64 36 /* 16 bit offset from GOT to PLT. */ -#define R_390_TLS_LOAD 37 /* Tag for load insn in TLS code. */ -#define R_390_TLS_GDCALL 38 /* Tag for function call in general - dynamic TLS code. */ -#define R_390_TLS_LDCALL 39 /* Tag for function call in local - dynamic TLS code. */ -#define R_390_TLS_GD32 40 /* Direct 32 bit for general dynamic - thread local data. */ -#define R_390_TLS_GD64 41 /* Direct 64 bit for general dynamic - thread local data. */ -#define R_390_TLS_GOTIE12 42 /* 12 bit GOT offset for static TLS - block offset. */ -#define R_390_TLS_GOTIE32 43 /* 32 bit GOT offset for static TLS - block offset. */ -#define R_390_TLS_GOTIE64 44 /* 64 bit GOT offset for static TLS - block offset. */ -#define R_390_TLS_LDM32 45 /* Direct 32 bit for local dynamic - thread local data in LD code. */ -#define R_390_TLS_LDM64 46 /* Direct 64 bit for local dynamic - thread local data in LD code. */ -#define R_390_TLS_IE32 47 /* 32 bit address of GOT entry for - negated static TLS block offset. */ -#define R_390_TLS_IE64 48 /* 64 bit address of GOT entry for - negated static TLS block offset. */ -#define R_390_TLS_IEENT 49 /* 32 bit rel. offset to GOT entry for - negated static TLS block offset. */ -#define R_390_TLS_LE32 50 /* 32 bit negated offset relative to - static TLS block. */ -#define R_390_TLS_LE64 51 /* 64 bit negated offset relative to - static TLS block. */ -#define R_390_TLS_LDO32 52 /* 32 bit offset relative to TLS - block. */ -#define R_390_TLS_LDO64 53 /* 64 bit offset relative to TLS - block. */ -#define R_390_TLS_DTPMOD 54 /* ID of module containing symbol. */ -#define R_390_TLS_DTPOFF 55 /* Offset in TLS block. */ -#define R_390_TLS_TPOFF 56 /* Negate offset in static TLS - block. */ -#define R_390_20 57 /* Direct 20 bit. */ -#define R_390_GOT20 58 /* 20 bit GOT offset. */ -#define R_390_GOTPLT20 59 /* 20 bit offset to jump slot. */ -#define R_390_TLS_GOTIE20 60 /* 20 bit GOT offset for static TLS - block offset. */ -/* Keep this the last entry. */ -#define R_390_NUM 61 - -/* - * These are used to set parameters in the core dumps. - */ -#ifndef __s390x__ -#define ELF_CLASS ELFCLASS32 -#else /* __s390x__ */ -#define ELF_CLASS ELFCLASS64 -#endif /* __s390x__ */ -#define ELF_DATA ELFDATA2MSB -#define ELF_ARCH EM_S390 - -/* - * ELF register definitions.. - */ - -#include -#include - -typedef s390_fp_regs elf_fpregset_t; -typedef s390_regs elf_gregset_t; - -typedef s390_fp_regs compat_elf_fpregset_t; -typedef s390_compat_regs compat_elf_gregset_t; - -#include /* for task_struct */ -#include /* for save_access_regs */ -#include - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) \ - (((x)->e_machine == EM_S390 || (x)->e_machine == EM_S390_OLD) \ - && (x)->e_ident[EI_CLASS] == ELF_CLASS) -#define compat_elf_check_arch(x) \ - (((x)->e_machine == EM_S390 || (x)->e_machine == EM_S390_OLD) \ - && (x)->e_ident[EI_CLASS] == ELF_CLASS) -#define compat_start_thread start_thread31 - -/* For SVR4/S390 the function pointer to be registered with `atexit` is - passed in R14. */ -#define ELF_PLAT_INIT(_r, load_addr) \ - do { \ - _r->gprs[14] = 0; \ - } while (0) - -#define CORE_DUMP_USE_REGSET -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE 4096 - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ -#define ELF_ET_DYN_BASE (STACK_TOP / 3 * 2) - -/* This yields a mask that user programs can use to figure out what - instruction set this CPU supports. */ - -extern unsigned long elf_hwcap; -#define ELF_HWCAP (elf_hwcap) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. - - For the moment, we have only optimizations for the Intel generations, - but that could change... */ - -#define ELF_PLATFORM_SIZE 8 -extern char elf_platform[]; -#define ELF_PLATFORM (elf_platform) - -#ifndef __s390x__ -#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) -#else /* __s390x__ */ -#define SET_PERSONALITY(ex, ibcs2) \ -do { \ - if (ibcs2) \ - set_personality(PER_SVR4); \ - else if (current->personality != PER_LINUX32) \ - set_personality(PER_LINUX); \ - if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ - set_thread_flag(TIF_31BIT); \ - else \ - clear_thread_flag(TIF_31BIT); \ -} while (0) -#endif /* __s390x__ */ - -/* - * An executable for which elf_read_implies_exec() returns TRUE will - * have the READ_IMPLIES_EXEC personality flag set automatically. - */ -#define elf_read_implies_exec(ex, executable_stack) \ -({ \ - if (current->mm->context.noexec && \ - executable_stack != EXSTACK_DISABLE_X) \ - disable_noexec(current->mm, current); \ - current->mm->context.noexec == 0; \ -}) - -#endif diff --git a/include/asm-s390/emergency-restart.h b/include/asm-s390/emergency-restart.h deleted file mode 100644 index 108d8c48e42e..000000000000 --- a/include/asm-s390/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-s390/errno.h b/include/asm-s390/errno.h deleted file mode 100644 index e41d5b37c4d6..000000000000 --- a/include/asm-s390/errno.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * include/asm-s390/errno.h - * - * S390 version - * - */ - -#ifndef _S390_ERRNO_H -#define _S390_ERRNO_H - -#include - -#endif diff --git a/include/asm-s390/etr.h b/include/asm-s390/etr.h deleted file mode 100644 index 80ef58c61970..000000000000 --- a/include/asm-s390/etr.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * include/asm-s390/etr.h - * - * Copyright IBM Corp. 2006 - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) - */ -#ifndef __S390_ETR_H -#define __S390_ETR_H - -/* ETR attachment control register */ -struct etr_eacr { - unsigned int e0 : 1; /* port 0 stepping control */ - unsigned int e1 : 1; /* port 1 stepping control */ - unsigned int _pad0 : 5; /* must be 00100 */ - unsigned int dp : 1; /* data port control */ - unsigned int p0 : 1; /* port 0 change recognition control */ - unsigned int p1 : 1; /* port 1 change recognition control */ - unsigned int _pad1 : 3; /* must be 000 */ - unsigned int ea : 1; /* ETR alert control */ - unsigned int es : 1; /* ETR sync check control */ - unsigned int sl : 1; /* switch to local control */ -} __attribute__ ((packed)); - -/* Port state returned by steai */ -enum etr_psc { - etr_psc_operational = 0, - etr_psc_semi_operational = 1, - etr_psc_protocol_error = 4, - etr_psc_no_symbols = 8, - etr_psc_no_signal = 12, - etr_psc_pps_mode = 13 -}; - -/* Logical port state returned by stetr */ -enum etr_lpsc { - etr_lpsc_operational_step = 0, - etr_lpsc_operational_alt = 1, - etr_lpsc_semi_operational = 2, - etr_lpsc_protocol_error = 4, - etr_lpsc_no_symbol_sync = 8, - etr_lpsc_no_signal = 12, - etr_lpsc_pps_mode = 13 -}; - -/* ETR status words */ -struct etr_esw { - struct etr_eacr eacr; /* attachment control register */ - unsigned int y : 1; /* stepping mode */ - unsigned int _pad0 : 5; /* must be 00000 */ - unsigned int p : 1; /* stepping port number */ - unsigned int q : 1; /* data port number */ - unsigned int psc0 : 4; /* port 0 state code */ - unsigned int psc1 : 4; /* port 1 state code */ -} __attribute__ ((packed)); - -/* Second level data register status word */ -struct etr_slsw { - unsigned int vv1 : 1; /* copy of validity bit data frame 1 */ - unsigned int vv2 : 1; /* copy of validity bit data frame 2 */ - unsigned int vv3 : 1; /* copy of validity bit data frame 3 */ - unsigned int vv4 : 1; /* copy of validity bit data frame 4 */ - unsigned int _pad0 : 19; /* must by all zeroes */ - unsigned int n : 1; /* EAF port number */ - unsigned int v1 : 1; /* validity bit ETR data frame 1 */ - unsigned int v2 : 1; /* validity bit ETR data frame 2 */ - unsigned int v3 : 1; /* validity bit ETR data frame 3 */ - unsigned int v4 : 1; /* validity bit ETR data frame 4 */ - unsigned int _pad1 : 4; /* must be 0000 */ -} __attribute__ ((packed)); - -/* ETR data frames */ -struct etr_edf1 { - unsigned int u : 1; /* untuned bit */ - unsigned int _pad0 : 1; /* must be 0 */ - unsigned int r : 1; /* service request bit */ - unsigned int _pad1 : 4; /* must be 0000 */ - unsigned int a : 1; /* time adjustment bit */ - unsigned int net_id : 8; /* ETR network id */ - unsigned int etr_id : 8; /* id of ETR which sends data frames */ - unsigned int etr_pn : 8; /* port number of ETR output port */ -} __attribute__ ((packed)); - -struct etr_edf2 { - unsigned int etv : 32; /* Upper 32 bits of TOD. */ -} __attribute__ ((packed)); - -struct etr_edf3 { - unsigned int rc : 8; /* failure reason code */ - unsigned int _pad0 : 3; /* must be 000 */ - unsigned int c : 1; /* ETR coupled bit */ - unsigned int tc : 4; /* ETR type code */ - unsigned int blto : 8; /* biased local time offset */ - /* (blto - 128) * 15 = minutes */ - unsigned int buo : 8; /* biased utc offset */ - /* (buo - 128) = leap seconds */ -} __attribute__ ((packed)); - -struct etr_edf4 { - unsigned int ed : 8; /* ETS device dependent data */ - unsigned int _pad0 : 1; /* must be 0 */ - unsigned int buc : 5; /* biased ut1 correction */ - /* (buc - 16) * 0.1 seconds */ - unsigned int em : 6; /* ETS error magnitude */ - unsigned int dc : 6; /* ETS drift code */ - unsigned int sc : 6; /* ETS steering code */ -} __attribute__ ((packed)); - -/* - * ETR attachment information block, two formats - * format 1 has 4 reserved words with a size of 64 bytes - * format 2 has 16 reserved words with a size of 96 bytes - */ -struct etr_aib { - struct etr_esw esw; - struct etr_slsw slsw; - unsigned long long tsp; - struct etr_edf1 edf1; - struct etr_edf2 edf2; - struct etr_edf3 edf3; - struct etr_edf4 edf4; - unsigned int reserved[16]; -} __attribute__ ((packed,aligned(8))); - -/* ETR interruption parameter */ -struct etr_irq_parm { - unsigned int _pad0 : 8; - unsigned int pc0 : 1; /* port 0 state change */ - unsigned int pc1 : 1; /* port 1 state change */ - unsigned int _pad1 : 3; - unsigned int eai : 1; /* ETR alert indication */ - unsigned int _pad2 : 18; -} __attribute__ ((packed)); - -/* Query TOD offset result */ -struct etr_ptff_qto { - unsigned long long physical_clock; - unsigned long long tod_offset; - unsigned long long logical_tod_offset; - unsigned long long tod_epoch_difference; -} __attribute__ ((packed)); - -/* Inline assembly helper functions */ -static inline int etr_setr(struct etr_eacr *ctrl) -{ - int rc = -ENOSYS; - - asm volatile( - " .insn s,0xb2160000,0(%2)\n" - "0: la %0,0\n" - "1:\n" - EX_TABLE(0b,1b) - : "+d" (rc) : "m" (*ctrl), "a" (ctrl)); - return rc; -} - -/* Stores a format 1 aib with 64 bytes */ -static inline int etr_stetr(struct etr_aib *aib) -{ - int rc = -ENOSYS; - - asm volatile( - " .insn s,0xb2170000,0(%2)\n" - "0: la %0,0\n" - "1:\n" - EX_TABLE(0b,1b) - : "+d" (rc) : "m" (*aib), "a" (aib)); - return rc; -} - -/* Stores a format 2 aib with 96 bytes for specified port */ -static inline int etr_steai(struct etr_aib *aib, unsigned int func) -{ - register unsigned int reg0 asm("0") = func; - int rc = -ENOSYS; - - asm volatile( - " .insn s,0xb2b30000,0(%2)\n" - "0: la %0,0\n" - "1:\n" - EX_TABLE(0b,1b) - : "+d" (rc) : "m" (*aib), "a" (aib), "d" (reg0)); - return rc; -} - -/* Function codes for the steai instruction. */ -#define ETR_STEAI_STEPPING_PORT 0x10 -#define ETR_STEAI_ALTERNATE_PORT 0x11 -#define ETR_STEAI_PORT_0 0x12 -#define ETR_STEAI_PORT_1 0x13 - -static inline int etr_ptff(void *ptff_block, unsigned int func) -{ - register unsigned int reg0 asm("0") = func; - register unsigned long reg1 asm("1") = (unsigned long) ptff_block; - int rc = -ENOSYS; - - asm volatile( - " .word 0x0104\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (rc), "=m" (ptff_block) - : "d" (reg0), "d" (reg1), "m" (ptff_block) : "cc"); - return rc; -} - -/* Function codes for the ptff instruction. */ -#define ETR_PTFF_QAF 0x00 /* query available functions */ -#define ETR_PTFF_QTO 0x01 /* query tod offset */ -#define ETR_PTFF_QSI 0x02 /* query steering information */ -#define ETR_PTFF_ATO 0x40 /* adjust tod offset */ -#define ETR_PTFF_STO 0x41 /* set tod offset */ -#define ETR_PTFF_SFS 0x42 /* set fine steering rate */ -#define ETR_PTFF_SGS 0x43 /* set gross steering rate */ - -/* Functions needed by the machine check handler */ -void etr_switch_to_local(void); -void etr_sync_check(void); - -/* STP interruption parameter */ -struct stp_irq_parm { - unsigned int _pad0 : 14; - unsigned int tsc : 1; /* Timing status change */ - unsigned int lac : 1; /* Link availability change */ - unsigned int tcpc : 1; /* Time control parameter change */ - unsigned int _pad2 : 15; -} __attribute__ ((packed)); - -#define STP_OP_SYNC 1 -#define STP_OP_CTRL 3 - -struct stp_sstpi { - unsigned int rsvd0; - unsigned int rsvd1 : 8; - unsigned int stratum : 8; - unsigned int vbits : 16; - unsigned int leaps : 16; - unsigned int tmd : 4; - unsigned int ctn : 4; - unsigned int rsvd2 : 3; - unsigned int c : 1; - unsigned int tst : 4; - unsigned int tzo : 16; - unsigned int dsto : 16; - unsigned int ctrl : 16; - unsigned int rsvd3 : 16; - unsigned int tto; - unsigned int rsvd4; - unsigned int ctnid[3]; - unsigned int rsvd5; - unsigned int todoff[4]; - unsigned int rsvd6[48]; -} __attribute__ ((packed)); - -/* Functions needed by the machine check handler */ -void stp_sync_check(void); -void stp_island_check(void); - -#endif /* __S390_ETR_H */ diff --git a/include/asm-s390/extmem.h b/include/asm-s390/extmem.h deleted file mode 100644 index 33837d756184..000000000000 --- a/include/asm-s390/extmem.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-s390x/extmem.h - * - * definitions for external memory segment support - * Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation - */ - -#ifndef _ASM_S390X_DCSS_H -#define _ASM_S390X_DCSS_H -#ifndef __ASSEMBLY__ - -/* possible values for segment type as returned by segment_info */ -#define SEG_TYPE_SW 0 -#define SEG_TYPE_EW 1 -#define SEG_TYPE_SR 2 -#define SEG_TYPE_ER 3 -#define SEG_TYPE_SN 4 -#define SEG_TYPE_EN 5 -#define SEG_TYPE_SC 6 -#define SEG_TYPE_EWEN 7 - -#define SEGMENT_SHARED 0 -#define SEGMENT_EXCLUSIVE 1 - -int segment_load (char *name, int segtype, unsigned long *addr, unsigned long *length); -void segment_unload(char *name); -void segment_save(char *name); -int segment_type (char* name); -int segment_modify_shared (char *name, int do_nonshared); -void segment_warning(int rc, char *seg_name); - -#endif -#endif diff --git a/include/asm-s390/fb.h b/include/asm-s390/fb.h deleted file mode 100644 index c7df38030992..000000000000 --- a/include/asm-s390/fb.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ -#include - -#define fb_pgprotect(...) do {} while (0) - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-s390/fcntl.h b/include/asm-s390/fcntl.h deleted file mode 100644 index 46ab12db5739..000000000000 --- a/include/asm-s390/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-s390/fcx.h b/include/asm-s390/fcx.h deleted file mode 100644 index 8be1f3a58042..000000000000 --- a/include/asm-s390/fcx.h +++ /dev/null @@ -1,311 +0,0 @@ -/* - * Functions for assembling fcx enabled I/O control blocks. - * - * Copyright IBM Corp. 2008 - * Author(s): Peter Oberparleiter - */ - -#ifndef _ASM_S390_FCX_H -#define _ASM_S390_FCX_H _ASM_S390_FCX_H - -#include - -#define TCW_FORMAT_DEFAULT 0 -#define TCW_TIDAW_FORMAT_DEFAULT 0 -#define TCW_FLAGS_INPUT_TIDA 1 << (23 - 5) -#define TCW_FLAGS_TCCB_TIDA 1 << (23 - 6) -#define TCW_FLAGS_OUTPUT_TIDA 1 << (23 - 7) -#define TCW_FLAGS_TIDAW_FORMAT(x) ((x) & 3) << (23 - 9) -#define TCW_FLAGS_GET_TIDAW_FORMAT(x) (((x) >> (23 - 9)) & 3) - -/** - * struct tcw - Transport Control Word (TCW) - * @format: TCW format - * @flags: TCW flags - * @tccbl: Transport-Command-Control-Block Length - * @r: Read Operations - * @w: Write Operations - * @output: Output-Data Address - * @input: Input-Data Address - * @tsb: Transport-Status-Block Address - * @tccb: Transport-Command-Control-Block Address - * @output_count: Output Count - * @input_count: Input Count - * @intrg: Interrogate TCW Address - */ -struct tcw { - u32 format:2; - u32 :6; - u32 flags:24; - u32 :8; - u32 tccbl:6; - u32 r:1; - u32 w:1; - u32 :16; - u64 output; - u64 input; - u64 tsb; - u64 tccb; - u32 output_count; - u32 input_count; - u32 :32; - u32 :32; - u32 :32; - u32 intrg; -} __attribute__ ((packed, aligned(64))); - -#define TIDAW_FLAGS_LAST 1 << (7 - 0) -#define TIDAW_FLAGS_SKIP 1 << (7 - 1) -#define TIDAW_FLAGS_DATA_INT 1 << (7 - 2) -#define TIDAW_FLAGS_TTIC 1 << (7 - 3) -#define TIDAW_FLAGS_INSERT_CBC 1 << (7 - 4) - -/** - * struct tidaw - Transport-Indirect-Addressing Word (TIDAW) - * @flags: TIDAW flags. Can be an arithmetic OR of the following constants: - * %TIDAW_FLAGS_LAST, %TIDAW_FLAGS_SKIP, %TIDAW_FLAGS_DATA_INT, - * %TIDAW_FLAGS_TTIC, %TIDAW_FLAGS_INSERT_CBC - * @count: Count - * @addr: Address - */ -struct tidaw { - u32 flags:8; - u32 :24; - u32 count; - u64 addr; -} __attribute__ ((packed, aligned(16))); - -/** - * struct tsa_iostat - I/O-Status Transport-Status Area (IO-Stat TSA) - * @dev_time: Device Time - * @def_time: Defer Time - * @queue_time: Queue Time - * @dev_busy_time: Device-Busy Time - * @dev_act_time: Device-Active-Only Time - * @sense: Sense Data (if present) - */ -struct tsa_iostat { - u32 dev_time; - u32 def_time; - u32 queue_time; - u32 dev_busy_time; - u32 dev_act_time; - u8 sense[32]; -} __attribute__ ((packed)); - -/** - * struct tsa_ddpcs - Device-Detected-Program-Check Transport-Status Area (DDPC TSA) - * @rc: Reason Code - * @rcq: Reason Code Qualifier - * @sense: Sense Data (if present) - */ -struct tsa_ddpc { - u32 :24; - u32 rc:8; - u8 rcq[16]; - u8 sense[32]; -} __attribute__ ((packed)); - -#define TSA_INTRG_FLAGS_CU_STATE_VALID 1 << (7 - 0) -#define TSA_INTRG_FLAGS_DEV_STATE_VALID 1 << (7 - 1) -#define TSA_INTRG_FLAGS_OP_STATE_VALID 1 << (7 - 2) - -/** - * struct tsa_intrg - Interrogate Transport-Status Area (Intrg. TSA) - * @format: Format - * @flags: Flags. Can be an arithmetic OR of the following constants: - * %TSA_INTRG_FLAGS_CU_STATE_VALID, %TSA_INTRG_FLAGS_DEV_STATE_VALID, - * %TSA_INTRG_FLAGS_OP_STATE_VALID - * @cu_state: Controle-Unit State - * @dev_state: Device State - * @op_state: Operation State - * @sd_info: State-Dependent Information - * @dl_id: Device-Level Identifier - * @dd_data: Device-Dependent Data - */ -struct tsa_intrg { - u32 format:8; - u32 flags:8; - u32 cu_state:8; - u32 dev_state:8; - u32 op_state:8; - u32 :24; - u8 sd_info[12]; - u32 dl_id; - u8 dd_data[28]; -} __attribute__ ((packed)); - -#define TSB_FORMAT_NONE 0 -#define TSB_FORMAT_IOSTAT 1 -#define TSB_FORMAT_DDPC 2 -#define TSB_FORMAT_INTRG 3 - -#define TSB_FLAGS_DCW_OFFSET_VALID 1 << (7 - 0) -#define TSB_FLAGS_COUNT_VALID 1 << (7 - 1) -#define TSB_FLAGS_CACHE_MISS 1 << (7 - 2) -#define TSB_FLAGS_TIME_VALID 1 << (7 - 3) -#define TSB_FLAGS_FORMAT(x) ((x) & 7) -#define TSB_FORMAT(t) ((t)->flags & 7) - -/** - * struct tsb - Transport-Status Block (TSB) - * @length: Length - * @flags: Flags. Can be an arithmetic OR of the following constants: - * %TSB_FLAGS_DCW_OFFSET_VALID, %TSB_FLAGS_COUNT_VALID, %TSB_FLAGS_CACHE_MISS, - * %TSB_FLAGS_TIME_VALID - * @dcw_offset: DCW Offset - * @count: Count - * @tsa: Transport-Status-Area - */ -struct tsb { - u32 length:8; - u32 flags:8; - u32 dcw_offset:16; - u32 count; - u32 :32; - union { - struct tsa_iostat iostat; - struct tsa_ddpc ddpc; - struct tsa_intrg intrg; - } __attribute__ ((packed)) tsa; -} __attribute__ ((packed, aligned(8))); - -#define DCW_INTRG_FORMAT_DEFAULT 0 - -#define DCW_INTRG_RC_UNSPECIFIED 0 -#define DCW_INTRG_RC_TIMEOUT 1 - -#define DCW_INTRG_RCQ_UNSPECIFIED 0 -#define DCW_INTRG_RCQ_PRIMARY 1 -#define DCW_INTRG_RCQ_SECONDARY 2 - -#define DCW_INTRG_FLAGS_MPM 1 < (7 - 0) -#define DCW_INTRG_FLAGS_PPR 1 < (7 - 1) -#define DCW_INTRG_FLAGS_CRIT 1 < (7 - 2) - -/** - * struct dcw_intrg_data - Interrogate DCW data - * @format: Format. Should be %DCW_INTRG_FORMAT_DEFAULT - * @rc: Reason Code. Can be one of %DCW_INTRG_RC_UNSPECIFIED, - * %DCW_INTRG_RC_TIMEOUT - * @rcq: Reason Code Qualifier: Can be one of %DCW_INTRG_RCQ_UNSPECIFIED, - * %DCW_INTRG_RCQ_PRIMARY, %DCW_INTRG_RCQ_SECONDARY - * @lpm: Logical-Path Mask - * @pam: Path-Available Mask - * @pim: Path-Installed Mask - * @timeout: Timeout - * @flags: Flags. Can be an arithmetic OR of %DCW_INTRG_FLAGS_MPM, - * %DCW_INTRG_FLAGS_PPR, %DCW_INTRG_FLAGS_CRIT - * @time: Time - * @prog_id: Program Identifier - * @prog_data: Program-Dependent Data - */ -struct dcw_intrg_data { - u32 format:8; - u32 rc:8; - u32 rcq:8; - u32 lpm:8; - u32 pam:8; - u32 pim:8; - u32 timeout:16; - u32 flags:8; - u32 :24; - u32 :32; - u64 time; - u64 prog_id; - u8 prog_data[0]; -} __attribute__ ((packed)); - -#define DCW_FLAGS_CC 1 << (7 - 1) - -#define DCW_CMD_WRITE 0x01 -#define DCW_CMD_READ 0x02 -#define DCW_CMD_CONTROL 0x03 -#define DCW_CMD_SENSE 0x04 -#define DCW_CMD_SENSE_ID 0xe4 -#define DCW_CMD_INTRG 0x40 - -/** - * struct dcw - Device-Command Word (DCW) - * @cmd: Command Code. Can be one of %DCW_CMD_WRITE, %DCW_CMD_READ, - * %DCW_CMD_CONTROL, %DCW_CMD_SENSE, %DCW_CMD_SENSE_ID, %DCW_CMD_INTRG - * @flags: Flags. Can be an arithmetic OR of %DCW_FLAGS_CC - * @cd_count: Control-Data Count - * @count: Count - * @cd: Control Data - */ -struct dcw { - u32 cmd:8; - u32 flags:8; - u32 :8; - u32 cd_count:8; - u32 count; - u8 cd[0]; -} __attribute__ ((packed)); - -#define TCCB_FORMAT_DEFAULT 0x7f -#define TCCB_MAX_DCW 30 -#define TCCB_MAX_SIZE (sizeof(struct tccb_tcah) + \ - TCCB_MAX_DCW * sizeof(struct dcw) + \ - sizeof(struct tccb_tcat)) -#define TCCB_SAC_DEFAULT 0xf901 -#define TCCB_SAC_INTRG 0xf902 - -/** - * struct tccb_tcah - Transport-Command-Area Header (TCAH) - * @format: Format. Should be %TCCB_FORMAT_DEFAULT - * @tcal: Transport-Command-Area Length - * @sac: Service-Action Code. Can be one of %TCCB_SAC_DEFAULT, %TCCB_SAC_INTRG - * @prio: Priority - */ -struct tccb_tcah { - u32 format:8; - u32 :24; - u32 :24; - u32 tcal:8; - u32 sac:16; - u32 :8; - u32 prio:8; - u32 :32; -} __attribute__ ((packed)); - -/** - * struct tccb_tcat - Transport-Command-Area Trailer (TCAT) - * @count: Transport Count - */ -struct tccb_tcat { - u32 :32; - u32 count; -} __attribute__ ((packed)); - -/** - * struct tccb - (partial) Transport-Command-Control Block (TCCB) - * @tcah: TCAH - * @tca: Transport-Command Area - */ -struct tccb { - struct tccb_tcah tcah; - u8 tca[0]; -} __attribute__ ((packed, aligned(8))); - -struct tcw *tcw_get_intrg(struct tcw *tcw); -void *tcw_get_data(struct tcw *tcw); -struct tccb *tcw_get_tccb(struct tcw *tcw); -struct tsb *tcw_get_tsb(struct tcw *tcw); - -void tcw_init(struct tcw *tcw, int r, int w); -void tcw_finalize(struct tcw *tcw, int num_tidaws); - -void tcw_set_intrg(struct tcw *tcw, struct tcw *intrg_tcw); -void tcw_set_data(struct tcw *tcw, void *data, int use_tidal); -void tcw_set_tccb(struct tcw *tcw, struct tccb *tccb); -void tcw_set_tsb(struct tcw *tcw, struct tsb *tsb); - -void tccb_init(struct tccb *tccb, size_t tccb_size, u32 sac); -void tsb_init(struct tsb *tsb); -struct dcw *tccb_add_dcw(struct tccb *tccb, size_t tccb_size, u8 cmd, u8 flags, - void *cd, u8 cd_count, u32 count); -struct tidaw *tcw_add_tidaw(struct tcw *tcw, int num_tidaws, u8 flags, - void *addr, u32 count); - -#endif /* _ASM_S390_FCX_H */ diff --git a/include/asm-s390/futex.h b/include/asm-s390/futex.h deleted file mode 100644 index 5c5d02de49e9..000000000000 --- a/include/asm-s390/futex.h +++ /dev/null @@ -1,52 +0,0 @@ -#ifndef _ASM_S390_FUTEX_H -#define _ASM_S390_FUTEX_H - -#ifdef __KERNEL__ - -#include -#include -#include - -static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) -{ - int op = (encoded_op >> 28) & 7; - int cmp = (encoded_op >> 24) & 15; - int oparg = (encoded_op << 8) >> 20; - int cmparg = (encoded_op << 20) >> 20; - int oldval, ret; - - if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) - oparg = 1 << oparg; - - if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - pagefault_disable(); - ret = uaccess.futex_atomic_op(op, uaddr, oparg, &oldval); - pagefault_enable(); - - if (!ret) { - switch (cmp) { - case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; - case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; - case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; - case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; - case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; - case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; - default: ret = -ENOSYS; - } - } - return ret; -} - -static inline int futex_atomic_cmpxchg_inatomic(int __user *uaddr, - int oldval, int newval) -{ - if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - return uaccess.futex_atomic_cmpxchg(uaddr, oldval, newval); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_S390_FUTEX_H */ diff --git a/include/asm-s390/hardirq.h b/include/asm-s390/hardirq.h deleted file mode 100644 index 89ec7056da28..000000000000 --- a/include/asm-s390/hardirq.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * include/asm-s390/hardirq.h - * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) - * - * Derived from "include/asm-i386/hardirq.h" - */ - -#ifndef __ASM_HARDIRQ_H -#define __ASM_HARDIRQ_H - -#include -#include -#include -#include -#include - -/* irq_cpustat_t is unused currently, but could be converted - * into a percpu variable instead of storing softirq_pending - * on the lowcore */ -typedef struct { - unsigned int __softirq_pending; -} irq_cpustat_t; - -#define local_softirq_pending() (S390_lowcore.softirq_pending) - -#define __ARCH_IRQ_STAT -#define __ARCH_HAS_DO_SOFTIRQ - -#define HARDIRQ_BITS 8 - -void clock_comparator_work(void); - -static inline unsigned long long local_tick_disable(void) -{ - unsigned long long old; - - old = S390_lowcore.clock_comparator; - S390_lowcore.clock_comparator = -1ULL; - return old; -} - -static inline void local_tick_enable(unsigned long long comp) -{ - S390_lowcore.clock_comparator = comp; -} - -#endif /* __ASM_HARDIRQ_H */ diff --git a/include/asm-s390/hugetlb.h b/include/asm-s390/hugetlb.h deleted file mode 100644 index 670a1d1745d2..000000000000 --- a/include/asm-s390/hugetlb.h +++ /dev/null @@ -1,184 +0,0 @@ -/* - * IBM System z Huge TLB Page Support for Kernel. - * - * Copyright IBM Corp. 2008 - * Author(s): Gerald Schaefer - */ - -#ifndef _ASM_S390_HUGETLB_H -#define _ASM_S390_HUGETLB_H - -#include -#include - - -#define is_hugepage_only_range(mm, addr, len) 0 -#define hugetlb_free_pgd_range free_pgd_range - -void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte); - -/* - * If the arch doesn't supply something else, assume that hugepage - * size aligned regions are ok without further preparation. - */ -static inline int prepare_hugepage_range(struct file *file, - unsigned long addr, unsigned long len) -{ - if (len & ~HPAGE_MASK) - return -EINVAL; - if (addr & ~HPAGE_MASK) - return -EINVAL; - return 0; -} - -#define hugetlb_prefault_arch_hook(mm) do { } while (0) - -int arch_prepare_hugepage(struct page *page); -void arch_release_hugepage(struct page *page); - -static inline pte_t pte_mkhuge(pte_t pte) -{ - /* - * PROT_NONE needs to be remapped from the pte type to the ste type. - * The HW invalid bit is also different for pte and ste. The pte - * invalid bit happens to be the same as the ste _SEGMENT_ENTRY_LARGE - * bit, so we don't have to clear it. - */ - if (pte_val(pte) & _PAGE_INVALID) { - if (pte_val(pte) & _PAGE_SWT) - pte_val(pte) |= _HPAGE_TYPE_NONE; - pte_val(pte) |= _SEGMENT_ENTRY_INV; - } - /* - * Clear SW pte bits SWT and SWX, there are no SW bits in a segment - * table entry. - */ - pte_val(pte) &= ~(_PAGE_SWT | _PAGE_SWX); - /* - * Also set the change-override bit because we don't need dirty bit - * tracking for hugetlbfs pages. - */ - pte_val(pte) |= (_SEGMENT_ENTRY_LARGE | _SEGMENT_ENTRY_CO); - return pte; -} - -static inline pte_t huge_pte_wrprotect(pte_t pte) -{ - pte_val(pte) |= _PAGE_RO; - return pte; -} - -static inline int huge_pte_none(pte_t pte) -{ - return (pte_val(pte) & _SEGMENT_ENTRY_INV) && - !(pte_val(pte) & _SEGMENT_ENTRY_RO); -} - -static inline pte_t huge_ptep_get(pte_t *ptep) -{ - pte_t pte = *ptep; - unsigned long mask; - - if (!MACHINE_HAS_HPAGE) { - ptep = (pte_t *) (pte_val(pte) & _SEGMENT_ENTRY_ORIGIN); - if (ptep) { - mask = pte_val(pte) & - (_SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO); - pte = pte_mkhuge(*ptep); - pte_val(pte) |= mask; - } - } - return pte; -} - -static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - pte_t pte = huge_ptep_get(ptep); - - pmd_clear((pmd_t *) ptep); - return pte; -} - -static inline void __pmd_csp(pmd_t *pmdp) -{ - register unsigned long reg2 asm("2") = pmd_val(*pmdp); - register unsigned long reg3 asm("3") = pmd_val(*pmdp) | - _SEGMENT_ENTRY_INV; - register unsigned long reg4 asm("4") = ((unsigned long) pmdp) + 5; - - asm volatile( - " csp %1,%3" - : "=m" (*pmdp) - : "d" (reg2), "d" (reg3), "d" (reg4), "m" (*pmdp) : "cc"); - pmd_val(*pmdp) = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY; -} - -static inline void __pmd_idte(unsigned long address, pmd_t *pmdp) -{ - unsigned long sto = (unsigned long) pmdp - - pmd_index(address) * sizeof(pmd_t); - - if (!(pmd_val(*pmdp) & _SEGMENT_ENTRY_INV)) { - asm volatile( - " .insn rrf,0xb98e0000,%2,%3,0,0" - : "=m" (*pmdp) - : "m" (*pmdp), "a" (sto), - "a" ((address & HPAGE_MASK)) - ); - } - pmd_val(*pmdp) = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY; -} - -static inline void huge_ptep_invalidate(struct mm_struct *mm, - unsigned long address, pte_t *ptep) -{ - pmd_t *pmdp = (pmd_t *) ptep; - - if (!MACHINE_HAS_IDTE) { - __pmd_csp(pmdp); - if (mm->context.noexec) { - pmdp = get_shadow_table(pmdp); - __pmd_csp(pmdp); - } - return; - } - - __pmd_idte(address, pmdp); - if (mm->context.noexec) { - pmdp = get_shadow_table(pmdp); - __pmd_idte(address, pmdp); - } - return; -} - -#define huge_ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \ -({ \ - int __changed = !pte_same(huge_ptep_get(__ptep), __entry); \ - if (__changed) { \ - huge_ptep_invalidate((__vma)->vm_mm, __addr, __ptep); \ - set_huge_pte_at((__vma)->vm_mm, __addr, __ptep, __entry); \ - } \ - __changed; \ -}) - -#define huge_ptep_set_wrprotect(__mm, __addr, __ptep) \ -({ \ - pte_t __pte = huge_ptep_get(__ptep); \ - if (pte_write(__pte)) { \ - if (atomic_read(&(__mm)->mm_users) > 1 || \ - (__mm) != current->active_mm) \ - huge_ptep_invalidate(__mm, __addr, __ptep); \ - set_huge_pte_at(__mm, __addr, __ptep, \ - huge_pte_wrprotect(__pte)); \ - } \ -}) - -static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, - unsigned long address, pte_t *ptep) -{ - huge_ptep_invalidate(vma->vm_mm, address, ptep); -} - -#endif /* _ASM_S390_HUGETLB_H */ diff --git a/include/asm-s390/idals.h b/include/asm-s390/idals.h deleted file mode 100644 index e82c10efe65a..000000000000 --- a/include/asm-s390/idals.h +++ /dev/null @@ -1,256 +0,0 @@ -/* - * File...........: linux/include/asm-s390x/idals.h - * Author(s)......: Holger Smolinski - * Martin Schwidefsky - * Bugreports.to..: - * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000a - - * History of changes - * 07/24/00 new file - * 05/04/02 code restructuring. - */ - -#ifndef _S390_IDALS_H -#define _S390_IDALS_H - -#include -#include -#include -#include -#include -#include - -#ifdef __s390x__ -#define IDA_SIZE_LOG 12 /* 11 for 2k , 12 for 4k */ -#else -#define IDA_SIZE_LOG 11 /* 11 for 2k , 12 for 4k */ -#endif -#define IDA_BLOCK_SIZE (1L<> 31) != 0; -#else - return 0; -#endif -} - - -/* - * Return the number of idal words needed for an address/length pair. - */ -static inline unsigned int -idal_nr_words(void *vaddr, unsigned int length) -{ -#ifdef __s390x__ - if (idal_is_needed(vaddr, length)) - return ((__pa(vaddr) & (IDA_BLOCK_SIZE-1)) + length + - (IDA_BLOCK_SIZE-1)) >> IDA_SIZE_LOG; -#endif - return 0; -} - -/* - * Create the list of idal words for an address/length pair. - */ -static inline unsigned long * -idal_create_words(unsigned long *idaws, void *vaddr, unsigned int length) -{ -#ifdef __s390x__ - unsigned long paddr; - unsigned int cidaw; - - paddr = __pa(vaddr); - cidaw = ((paddr & (IDA_BLOCK_SIZE-1)) + length + - (IDA_BLOCK_SIZE-1)) >> IDA_SIZE_LOG; - *idaws++ = paddr; - paddr &= -IDA_BLOCK_SIZE; - while (--cidaw > 0) { - paddr += IDA_BLOCK_SIZE; - *idaws++ = paddr; - } -#endif - return idaws; -} - -/* - * Sets the address of the data in CCW. - * If necessary it allocates an IDAL and sets the appropriate flags. - */ -static inline int -set_normalized_cda(struct ccw1 * ccw, void *vaddr) -{ -#ifdef __s390x__ - unsigned int nridaws; - unsigned long *idal; - - if (ccw->flags & CCW_FLAG_IDA) - return -EINVAL; - nridaws = idal_nr_words(vaddr, ccw->count); - if (nridaws > 0) { - idal = kmalloc(nridaws * sizeof(unsigned long), - GFP_ATOMIC | GFP_DMA ); - if (idal == NULL) - return -ENOMEM; - idal_create_words(idal, vaddr, ccw->count); - ccw->flags |= CCW_FLAG_IDA; - vaddr = idal; - } -#endif - ccw->cda = (__u32)(unsigned long) vaddr; - return 0; -} - -/* - * Releases any allocated IDAL related to the CCW. - */ -static inline void -clear_normalized_cda(struct ccw1 * ccw) -{ -#ifdef __s390x__ - if (ccw->flags & CCW_FLAG_IDA) { - kfree((void *)(unsigned long) ccw->cda); - ccw->flags &= ~CCW_FLAG_IDA; - } -#endif - ccw->cda = 0; -} - -/* - * Idal buffer extension - */ -struct idal_buffer { - size_t size; - size_t page_order; - void *data[0]; -}; - -/* - * Allocate an idal buffer - */ -static inline struct idal_buffer * -idal_buffer_alloc(size_t size, int page_order) -{ - struct idal_buffer *ib; - int nr_chunks, nr_ptrs, i; - - nr_ptrs = (size + IDA_BLOCK_SIZE - 1) >> IDA_SIZE_LOG; - nr_chunks = (4096 << page_order) >> IDA_SIZE_LOG; - ib = kmalloc(sizeof(struct idal_buffer) + nr_ptrs*sizeof(void *), - GFP_DMA | GFP_KERNEL); - if (ib == NULL) - return ERR_PTR(-ENOMEM); - ib->size = size; - ib->page_order = page_order; - for (i = 0; i < nr_ptrs; i++) { - if ((i & (nr_chunks - 1)) != 0) { - ib->data[i] = ib->data[i-1] + IDA_BLOCK_SIZE; - continue; - } - ib->data[i] = (void *) - __get_free_pages(GFP_KERNEL, page_order); - if (ib->data[i] != NULL) - continue; - // Not enough memory - while (i >= nr_chunks) { - i -= nr_chunks; - free_pages((unsigned long) ib->data[i], - ib->page_order); - } - kfree(ib); - return ERR_PTR(-ENOMEM); - } - return ib; -} - -/* - * Free an idal buffer. - */ -static inline void -idal_buffer_free(struct idal_buffer *ib) -{ - int nr_chunks, nr_ptrs, i; - - nr_ptrs = (ib->size + IDA_BLOCK_SIZE - 1) >> IDA_SIZE_LOG; - nr_chunks = (4096 << ib->page_order) >> IDA_SIZE_LOG; - for (i = 0; i < nr_ptrs; i += nr_chunks) - free_pages((unsigned long) ib->data[i], ib->page_order); - kfree(ib); -} - -/* - * Test if a idal list is really needed. - */ -static inline int -__idal_buffer_is_needed(struct idal_buffer *ib) -{ -#ifdef __s390x__ - return ib->size > (4096ul << ib->page_order) || - idal_is_needed(ib->data[0], ib->size); -#else - return ib->size > (4096ul << ib->page_order); -#endif -} - -/* - * Set channel data address to idal buffer. - */ -static inline void -idal_buffer_set_cda(struct idal_buffer *ib, struct ccw1 *ccw) -{ - if (__idal_buffer_is_needed(ib)) { - // setup idals; - ccw->cda = (u32)(addr_t) ib->data; - ccw->flags |= CCW_FLAG_IDA; - } else - // we do not need idals - use direct addressing - ccw->cda = (u32)(addr_t) ib->data[0]; - ccw->count = ib->size; -} - -/* - * Copy count bytes from an idal buffer to user memory - */ -static inline size_t -idal_buffer_to_user(struct idal_buffer *ib, void __user *to, size_t count) -{ - size_t left; - int i; - - BUG_ON(count > ib->size); - for (i = 0; count > IDA_BLOCK_SIZE; i++) { - left = copy_to_user(to, ib->data[i], IDA_BLOCK_SIZE); - if (left) - return left + count - IDA_BLOCK_SIZE; - to = (void __user *) to + IDA_BLOCK_SIZE; - count -= IDA_BLOCK_SIZE; - } - return copy_to_user(to, ib->data[i], count); -} - -/* - * Copy count bytes from user memory to an idal buffer - */ -static inline size_t -idal_buffer_from_user(struct idal_buffer *ib, const void __user *from, size_t count) -{ - size_t left; - int i; - - BUG_ON(count > ib->size); - for (i = 0; count > IDA_BLOCK_SIZE; i++) { - left = copy_from_user(ib->data[i], from, IDA_BLOCK_SIZE); - if (left) - return left + count - IDA_BLOCK_SIZE; - from = (void __user *) from + IDA_BLOCK_SIZE; - count -= IDA_BLOCK_SIZE; - } - return copy_from_user(ib->data[i], from, count); -} - -#endif diff --git a/include/asm-s390/io.h b/include/asm-s390/io.h deleted file mode 100644 index b7ff6afc3caa..000000000000 --- a/include/asm-s390/io.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * include/asm-s390/io.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) - * - * Derived from "include/asm-i386/io.h" - */ - -#ifndef _S390_IO_H -#define _S390_IO_H - -#ifdef __KERNEL__ - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * Change virtual addresses to physical addresses and vv. - * These are pretty trivial - */ -static inline unsigned long virt_to_phys(volatile void * address) -{ - unsigned long real_address; - asm volatile( - " lra %0,0(%1)\n" - " jz 0f\n" - " la %0,0\n" - "0:" - : "=a" (real_address) : "a" (address) : "cc"); - return real_address; -} - -static inline void * phys_to_virt(unsigned long address) -{ - return (void *) address; -} - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-s390/ioctl.h b/include/asm-s390/ioctl.h deleted file mode 100644 index b279fe06dfe5..000000000000 --- a/include/asm-s390/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-s390/ioctls.h b/include/asm-s390/ioctls.h deleted file mode 100644 index 40e481b1b461..000000000000 --- a/include/asm-s390/ioctls.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * include/asm-s390/ioctls.h - * - * S390 version - * - * Derived from "include/asm-i386/ioctls.h" - */ - -#ifndef __ARCH_S390_IOCTLS_H__ -#define __ARCH_S390_IOCTLS_H__ - -#include - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T',0x2A, struct termios2) -#define TCSETS2 _IOW('T',0x2B, struct termios2) -#define TCSETSW2 _IOW('T',0x2C, struct termios2) -#define TCSETSF2 _IOW('T',0x2D, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define FIOQSIZE 0x545E - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif diff --git a/include/asm-s390/ipcbuf.h b/include/asm-s390/ipcbuf.h deleted file mode 100644 index 37f293d12c8f..000000000000 --- a/include/asm-s390/ipcbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef __S390_IPCBUF_H__ -#define __S390_IPCBUF_H__ - -/* - * The user_ipc_perm structure for S/390 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; -#ifndef __s390x__ - unsigned short __pad2; -#endif /* ! __s390x__ */ - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __S390_IPCBUF_H__ */ diff --git a/include/asm-s390/ipl.h b/include/asm-s390/ipl.h deleted file mode 100644 index 1171e6d144a3..000000000000 --- a/include/asm-s390/ipl.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - * s390 (re)ipl support - * - * Copyright IBM Corp. 2007 - */ - -#ifndef _ASM_S390_IPL_H -#define _ASM_S390_IPL_H - -#include -#include -#include - -#define IPL_PARMBLOCK_ORIGIN 0x2000 - -#define IPL_PARM_BLK_FCP_LEN (sizeof(struct ipl_list_hdr) + \ - sizeof(struct ipl_block_fcp)) - -#define IPL_PARM_BLK0_FCP_LEN (sizeof(struct ipl_block_fcp) + 8) - -#define IPL_PARM_BLK_CCW_LEN (sizeof(struct ipl_list_hdr) + \ - sizeof(struct ipl_block_ccw)) - -#define IPL_PARM_BLK0_CCW_LEN (sizeof(struct ipl_block_ccw) + 8) - -#define IPL_MAX_SUPPORTED_VERSION (0) - -#define IPL_PARMBLOCK_START ((struct ipl_parameter_block *) \ - IPL_PARMBLOCK_ORIGIN) -#define IPL_PARMBLOCK_SIZE (IPL_PARMBLOCK_START->hdr.len) - -struct ipl_list_hdr { - u32 len; - u8 reserved1[3]; - u8 version; - u32 blk0_len; - u8 pbt; - u8 flags; - u16 reserved2; -} __attribute__((packed)); - -struct ipl_block_fcp { - u8 reserved1[313-1]; - u8 opt; - u8 reserved2[3]; - u16 reserved3; - u16 devno; - u8 reserved4[4]; - u64 wwpn; - u64 lun; - u32 bootprog; - u8 reserved5[12]; - u64 br_lba; - u32 scp_data_len; - u8 reserved6[260]; - u8 scp_data[]; -} __attribute__((packed)); - -#define DIAG308_VMPARM_SIZE 64 - -struct ipl_block_ccw { - u8 load_parm[8]; - u8 reserved1[84]; - u8 reserved2[2]; - u16 devno; - u8 vm_flags; - u8 reserved3[3]; - u32 vm_parm_len; - u8 nss_name[8]; - u8 vm_parm[DIAG308_VMPARM_SIZE]; - u8 reserved4[8]; -} __attribute__((packed)); - -struct ipl_parameter_block { - struct ipl_list_hdr hdr; - union { - struct ipl_block_fcp fcp; - struct ipl_block_ccw ccw; - } ipl_info; -} __attribute__((packed,aligned(4096))); - -/* - * IPL validity flags - */ -extern u32 ipl_flags; -extern u32 dump_prefix_page; -extern unsigned int zfcpdump_prefix_array[]; - -extern void do_reipl(void); -extern void do_halt(void); -extern void do_poff(void); -extern void ipl_save_parameters(void); -extern void ipl_update_parameters(void); -extern void get_ipl_vmparm(char *); - -enum { - IPL_DEVNO_VALID = 1, - IPL_PARMBLOCK_VALID = 2, - IPL_NSS_VALID = 4, -}; - -enum ipl_type { - IPL_TYPE_UNKNOWN = 1, - IPL_TYPE_CCW = 2, - IPL_TYPE_FCP = 4, - IPL_TYPE_FCP_DUMP = 8, - IPL_TYPE_NSS = 16, -}; - -struct ipl_info -{ - enum ipl_type type; - union { - struct { - struct ccw_dev_id dev_id; - } ccw; - struct { - struct ccw_dev_id dev_id; - u64 wwpn; - u64 lun; - } fcp; - struct { - char name[NSS_NAME_SIZE + 1]; - } nss; - } data; -}; - -extern struct ipl_info ipl_info; -extern void setup_ipl(void); - -/* - * DIAG 308 support - */ -enum diag308_subcode { - DIAG308_REL_HSA = 2, - DIAG308_IPL = 3, - DIAG308_DUMP = 4, - DIAG308_SET = 5, - DIAG308_STORE = 6, -}; - -enum diag308_ipl_type { - DIAG308_IPL_TYPE_FCP = 0, - DIAG308_IPL_TYPE_CCW = 2, -}; - -enum diag308_opt { - DIAG308_IPL_OPT_IPL = 0x10, - DIAG308_IPL_OPT_DUMP = 0x20, -}; - -enum diag308_flags { - DIAG308_FLAGS_LP_VALID = 0x80, -}; - -enum diag308_vm_flags { - DIAG308_VM_FLAGS_NSS_VALID = 0x80, - DIAG308_VM_FLAGS_VP_VALID = 0x40, -}; - -enum diag308_rc { - DIAG308_RC_OK = 0x0001, - DIAG308_RC_NOCONFIG = 0x0102, -}; - -extern int diag308(unsigned long subcode, void *addr); - -#endif /* _ASM_S390_IPL_H */ diff --git a/include/asm-s390/irq.h b/include/asm-s390/irq.h deleted file mode 100644 index 7da991a858f8..000000000000 --- a/include/asm-s390/irq.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _ASM_IRQ_H -#define _ASM_IRQ_H - -#ifdef __KERNEL__ -#include - -/* - * the definition of irqs has changed in 2.5.46: - * NR_IRQS is no longer the number of i/o - * interrupts (65536), but rather the number - * of interrupt classes (2). - * Only external and i/o interrupts make much sense here (CH). - */ - -enum interruption_class { - EXTERNAL_INTERRUPT, - IO_INTERRUPT, - - NR_IRQS, -}; - -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-s390/irq_regs.h b/include/asm-s390/irq_regs.h deleted file mode 100644 index 3dd9c0b70270..000000000000 --- a/include/asm-s390/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-s390/irqflags.h b/include/asm-s390/irqflags.h deleted file mode 100644 index 3f26131120b7..000000000000 --- a/include/asm-s390/irqflags.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * include/asm-s390/irqflags.h - * - * Copyright (C) IBM Corp. 2006 - * Author(s): Heiko Carstens - */ - -#ifndef __ASM_IRQFLAGS_H -#define __ASM_IRQFLAGS_H - -#ifdef __KERNEL__ - -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - -/* store then or system mask. */ -#define __raw_local_irq_stosm(__or) \ -({ \ - unsigned long __mask; \ - asm volatile( \ - " stosm %0,%1" \ - : "=Q" (__mask) : "i" (__or) : "memory"); \ - __mask; \ -}) - -/* store then and system mask. */ -#define __raw_local_irq_stnsm(__and) \ -({ \ - unsigned long __mask; \ - asm volatile( \ - " stnsm %0,%1" \ - : "=Q" (__mask) : "i" (__and) : "memory"); \ - __mask; \ -}) - -/* set system mask. */ -#define __raw_local_irq_ssm(__mask) \ -({ \ - asm volatile("ssm %0" : : "Q" (__mask) : "memory"); \ -}) - -#else /* __GNUC__ */ - -/* store then or system mask. */ -#define __raw_local_irq_stosm(__or) \ -({ \ - unsigned long __mask; \ - asm volatile( \ - " stosm 0(%1),%2" \ - : "=m" (__mask) \ - : "a" (&__mask), "i" (__or) : "memory"); \ - __mask; \ -}) - -/* store then and system mask. */ -#define __raw_local_irq_stnsm(__and) \ -({ \ - unsigned long __mask; \ - asm volatile( \ - " stnsm 0(%1),%2" \ - : "=m" (__mask) \ - : "a" (&__mask), "i" (__and) : "memory"); \ - __mask; \ -}) - -/* set system mask. */ -#define __raw_local_irq_ssm(__mask) \ -({ \ - asm volatile( \ - " ssm 0(%0)" \ - : : "a" (&__mask), "m" (__mask) : "memory"); \ -}) - -#endif /* __GNUC__ */ - -/* interrupt control.. */ -static inline unsigned long raw_local_irq_enable(void) -{ - return __raw_local_irq_stosm(0x03); -} - -static inline unsigned long raw_local_irq_disable(void) -{ - return __raw_local_irq_stnsm(0xfc); -} - -#define raw_local_save_flags(x) \ -do { \ - typecheck(unsigned long, x); \ - (x) = __raw_local_irq_stosm(0x00); \ -} while (0) - -static inline void raw_local_irq_restore(unsigned long flags) -{ - __raw_local_irq_ssm(flags); -} - -static inline int raw_irqs_disabled_flags(unsigned long flags) -{ - return !(flags & (3UL << (BITS_PER_LONG - 8))); -} - -/* For spinlocks etc */ -#define raw_local_irq_save(x) ((x) = raw_local_irq_disable()) - -#endif /* __KERNEL__ */ -#endif /* __ASM_IRQFLAGS_H */ diff --git a/include/asm-s390/isc.h b/include/asm-s390/isc.h deleted file mode 100644 index 34bb8916db4f..000000000000 --- a/include/asm-s390/isc.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASM_S390_ISC_H -#define _ASM_S390_ISC_H - -#include - -/* - * I/O interruption subclasses used by drivers. - * Please add all used iscs here so that it is possible to distribute - * isc usage between drivers. - * Reminder: 0 is highest priority, 7 lowest. - */ -#define MAX_ISC 7 - -/* Regular I/O interrupts. */ -#define IO_SCH_ISC 3 /* regular I/O subchannels */ -#define CONSOLE_ISC 1 /* console I/O subchannel */ -#define CHSC_SCH_ISC 7 /* CHSC subchannels */ -/* Adapter interrupts. */ -#define QDIO_AIRQ_ISC IO_SCH_ISC /* I/O subchannel in qdio mode */ - -/* Functions for registration of I/O interruption subclasses */ -void isc_register(unsigned int isc); -void isc_unregister(unsigned int isc); - -#endif /* _ASM_S390_ISC_H */ diff --git a/include/asm-s390/itcw.h b/include/asm-s390/itcw.h deleted file mode 100644 index a9bc5c36b32a..000000000000 --- a/include/asm-s390/itcw.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Functions for incremental construction of fcx enabled I/O control blocks. - * - * Copyright IBM Corp. 2008 - * Author(s): Peter Oberparleiter - */ - -#ifndef _ASM_S390_ITCW_H -#define _ASM_S390_ITCW_H _ASM_S390_ITCW_H - -#include -#include - -#define ITCW_OP_READ 0 -#define ITCW_OP_WRITE 1 - -struct itcw; - -struct tcw *itcw_get_tcw(struct itcw *itcw); -size_t itcw_calc_size(int intrg, int max_tidaws, int intrg_max_tidaws); -struct itcw *itcw_init(void *buffer, size_t size, int op, int intrg, - int max_tidaws, int intrg_max_tidaws); -struct dcw *itcw_add_dcw(struct itcw *itcw, u8 cmd, u8 flags, void *cd, - u8 cd_count, u32 count); -struct tidaw *itcw_add_tidaw(struct itcw *itcw, u8 flags, void *addr, - u32 count); -void itcw_set_data(struct itcw *itcw, void *addr, int use_tidal); -void itcw_finalize(struct itcw *itcw); - -#endif /* _ASM_S390_ITCW_H */ diff --git a/include/asm-s390/kdebug.h b/include/asm-s390/kdebug.h deleted file mode 100644 index 40db27cd6e60..000000000000 --- a/include/asm-s390/kdebug.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _S390_KDEBUG_H -#define _S390_KDEBUG_H - -/* - * Feb 2006 Ported to s390 - */ - -struct pt_regs; - -enum die_val { - DIE_OOPS = 1, - DIE_BPT, - DIE_SSTEP, - DIE_PANIC, - DIE_NMI, - DIE_DIE, - DIE_NMIWATCHDOG, - DIE_KERNELDEBUG, - DIE_TRAP, - DIE_GPF, - DIE_CALL, - DIE_NMI_IPI, -}; - -extern void die(const char *, struct pt_regs *, long); - -#endif diff --git a/include/asm-s390/kexec.h b/include/asm-s390/kexec.h deleted file mode 100644 index f219c6411e0b..000000000000 --- a/include/asm-s390/kexec.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-s390/kexec.h - * - * (C) Copyright IBM Corp. 2005 - * - * Author(s): Rolf Adelsberger - * - */ - -#ifndef _S390_KEXEC_H -#define _S390_KEXEC_H - -#ifdef __KERNEL__ -#include -#endif -#include -/* - * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return. - * I.e. Maximum page that is mapped directly into kernel memory, - * and kmap is not required. - */ - -/* Maximum physical address we can use pages from */ -#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) - -/* Maximum address we can reach in physical address mode */ -#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) - -/* Maximum address we can use for the control pages */ -/* Not more than 2GB */ -#define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31) - -/* Allocate one page for the pdp and the second for the code */ -#define KEXEC_CONTROL_CODE_SIZE 4096 - -/* The native architecture */ -#define KEXEC_ARCH KEXEC_ARCH_S390 - -/* Provide a dummy definition to avoid build failures. */ -static inline void crash_setup_regs(struct pt_regs *newregs, - struct pt_regs *oldregs) { } - -#endif /*_S390_KEXEC_H */ diff --git a/include/asm-s390/kmap_types.h b/include/asm-s390/kmap_types.h deleted file mode 100644 index fd1574648223..000000000000 --- a/include/asm-s390/kmap_types.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _ASM_KMAP_TYPES_H -#define _ASM_KMAP_TYPES_H - -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_TYPE_NR -}; - -#endif -#endif /* __KERNEL__ */ diff --git a/include/asm-s390/kprobes.h b/include/asm-s390/kprobes.h deleted file mode 100644 index 330f68caffe4..000000000000 --- a/include/asm-s390/kprobes.h +++ /dev/null @@ -1,103 +0,0 @@ -#ifndef _ASM_S390_KPROBES_H -#define _ASM_S390_KPROBES_H -/* - * Kernel Probes (KProbes) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) IBM Corporation, 2002, 2006 - * - * 2002-Oct Created by Vamsi Krishna S Kernel - * Probes initial implementation ( includes suggestions from - * Rusty Russell). - * 2004-Nov Modified for PPC64 by Ananth N Mavinakayanahalli - * - * 2005-Dec Used as a template for s390 by Mike Grundy - * - */ -#include -#include -#include - -#define __ARCH_WANT_KPROBES_INSN_SLOT -struct pt_regs; -struct kprobe; - -typedef u16 kprobe_opcode_t; -#define BREAKPOINT_INSTRUCTION 0x0002 - -/* Maximum instruction size is 3 (16bit) halfwords: */ -#define MAX_INSN_SIZE 0x0003 -#define MAX_STACK_SIZE 64 -#define MIN_STACK_SIZE(ADDR) (((MAX_STACK_SIZE) < \ - (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) \ - ? (MAX_STACK_SIZE) \ - : (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) - -#define kretprobe_blacklist_size 0 - -#define KPROBE_SWAP_INST 0x10 - -#define FIXUP_PSW_NORMAL 0x08 -#define FIXUP_BRANCH_NOT_TAKEN 0x04 -#define FIXUP_RETURN_REGISTER 0x02 -#define FIXUP_NOT_REQUIRED 0x01 - -/* Architecture specific copy of original instruction */ -struct arch_specific_insn { - /* copy of original instruction */ - kprobe_opcode_t *insn; - int fixup; - int ilen; - int reg; -}; - -struct ins_replace_args { - kprobe_opcode_t *ptr; - kprobe_opcode_t old; - kprobe_opcode_t new; -}; -struct prev_kprobe { - struct kprobe *kp; - unsigned long status; - unsigned long saved_psw; - unsigned long kprobe_saved_imask; - unsigned long kprobe_saved_ctl[3]; -}; - -/* per-cpu kprobe control block */ -struct kprobe_ctlblk { - unsigned long kprobe_status; - unsigned long kprobe_saved_imask; - unsigned long kprobe_saved_ctl[3]; - struct pt_regs jprobe_saved_regs; - unsigned long jprobe_saved_r14; - unsigned long jprobe_saved_r15; - struct prev_kprobe prev_kprobe; - kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE]; -}; - -void arch_remove_kprobe(struct kprobe *p); -void kretprobe_trampoline(void); -int is_prohibited_opcode(kprobe_opcode_t *instruction); -void get_instruction_type(struct arch_specific_insn *ainsn); - -int kprobe_fault_handler(struct pt_regs *regs, int trapnr); -int kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data); - -#define flush_insn_slot(p) do { } while (0) - -#endif /* _ASM_S390_KPROBES_H */ diff --git a/include/asm-s390/kvm.h b/include/asm-s390/kvm.h deleted file mode 100644 index d74002f95794..000000000000 --- a/include/asm-s390/kvm.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifndef __LINUX_KVM_S390_H -#define __LINUX_KVM_S390_H - -/* - * asm-s390/kvm.h - KVM s390 specific structures and definitions - * - * Copyright IBM Corp. 2008 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License (version 2 only) - * as published by the Free Software Foundation. - * - * Author(s): Carsten Otte - * Christian Borntraeger - */ -#include - -/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */ -struct kvm_pic_state { - /* no PIC for s390 */ -}; - -struct kvm_ioapic_state { - /* no IOAPIC for s390 */ -}; - -/* for KVM_GET_REGS and KVM_SET_REGS */ -struct kvm_regs { - /* general purpose regs for s390 */ - __u64 gprs[16]; -}; - -/* for KVM_GET_SREGS and KVM_SET_SREGS */ -struct kvm_sregs { - __u32 acrs[16]; - __u64 crs[16]; -}; - -/* for KVM_GET_FPU and KVM_SET_FPU */ -struct kvm_fpu { - __u32 fpc; - __u64 fprs[16]; -}; - -#endif diff --git a/include/asm-s390/kvm_host.h b/include/asm-s390/kvm_host.h deleted file mode 100644 index 3c55e4107dcc..000000000000 --- a/include/asm-s390/kvm_host.h +++ /dev/null @@ -1,235 +0,0 @@ -/* - * asm-s390/kvm_host.h - definition for kernel virtual machines on s390 - * - * Copyright IBM Corp. 2008 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License (version 2 only) - * as published by the Free Software Foundation. - * - * Author(s): Carsten Otte - */ - - -#ifndef ASM_KVM_HOST_H -#define ASM_KVM_HOST_H -#include -#include - -#define KVM_MAX_VCPUS 64 -#define KVM_MEMORY_SLOTS 32 -/* memory slots that does not exposed to userspace */ -#define KVM_PRIVATE_MEM_SLOTS 4 - -struct kvm_guest_debug { -}; - -struct sca_entry { - atomic_t scn; - __u64 reserved; - __u64 sda; - __u64 reserved2[2]; -} __attribute__((packed)); - - -struct sca_block { - __u64 ipte_control; - __u64 reserved[5]; - __u64 mcn; - __u64 reserved2; - struct sca_entry cpu[64]; -} __attribute__((packed)); - -#define KVM_PAGES_PER_HPAGE 256 - -#define CPUSTAT_HOST 0x80000000 -#define CPUSTAT_WAIT 0x10000000 -#define CPUSTAT_ECALL_PEND 0x08000000 -#define CPUSTAT_STOP_INT 0x04000000 -#define CPUSTAT_IO_INT 0x02000000 -#define CPUSTAT_EXT_INT 0x01000000 -#define CPUSTAT_RUNNING 0x00800000 -#define CPUSTAT_RETAINED 0x00400000 -#define CPUSTAT_TIMING_SUB 0x00020000 -#define CPUSTAT_SIE_SUB 0x00010000 -#define CPUSTAT_RRF 0x00008000 -#define CPUSTAT_SLSV 0x00004000 -#define CPUSTAT_SLSR 0x00002000 -#define CPUSTAT_ZARCH 0x00000800 -#define CPUSTAT_MCDS 0x00000100 -#define CPUSTAT_SM 0x00000080 -#define CPUSTAT_G 0x00000008 -#define CPUSTAT_J 0x00000002 -#define CPUSTAT_P 0x00000001 - -struct kvm_s390_sie_block { - atomic_t cpuflags; /* 0x0000 */ - __u32 prefix; /* 0x0004 */ - __u8 reserved8[32]; /* 0x0008 */ - __u64 cputm; /* 0x0028 */ - __u64 ckc; /* 0x0030 */ - __u64 epoch; /* 0x0038 */ - __u8 reserved40[4]; /* 0x0040 */ -#define LCTL_CR0 0x8000 - __u16 lctl; /* 0x0044 */ - __s16 icpua; /* 0x0046 */ - __u32 ictl; /* 0x0048 */ - __u32 eca; /* 0x004c */ - __u8 icptcode; /* 0x0050 */ - __u8 reserved51; /* 0x0051 */ - __u16 ihcpu; /* 0x0052 */ - __u8 reserved54[2]; /* 0x0054 */ - __u16 ipa; /* 0x0056 */ - __u32 ipb; /* 0x0058 */ - __u32 scaoh; /* 0x005c */ - __u8 reserved60; /* 0x0060 */ - __u8 ecb; /* 0x0061 */ - __u8 reserved62[2]; /* 0x0062 */ - __u32 scaol; /* 0x0064 */ - __u8 reserved68[4]; /* 0x0068 */ - __u32 todpr; /* 0x006c */ - __u8 reserved70[16]; /* 0x0070 */ - __u64 gmsor; /* 0x0080 */ - __u64 gmslm; /* 0x0088 */ - psw_t gpsw; /* 0x0090 */ - __u64 gg14; /* 0x00a0 */ - __u64 gg15; /* 0x00a8 */ - __u8 reservedb0[30]; /* 0x00b0 */ - __u16 iprcc; /* 0x00ce */ - __u8 reservedd0[48]; /* 0x00d0 */ - __u64 gcr[16]; /* 0x0100 */ - __u64 gbea; /* 0x0180 */ - __u8 reserved188[120]; /* 0x0188 */ -} __attribute__((packed)); - -struct kvm_vcpu_stat { - u32 exit_userspace; - u32 exit_null; - u32 exit_external_request; - u32 exit_external_interrupt; - u32 exit_stop_request; - u32 exit_validity; - u32 exit_instruction; - u32 instruction_lctl; - u32 instruction_lctlg; - u32 exit_program_interruption; - u32 exit_instr_and_program; - u32 deliver_emergency_signal; - u32 deliver_service_signal; - u32 deliver_virtio_interrupt; - u32 deliver_stop_signal; - u32 deliver_prefix_signal; - u32 deliver_restart_signal; - u32 deliver_program_int; - u32 exit_wait_state; - u32 instruction_stidp; - u32 instruction_spx; - u32 instruction_stpx; - u32 instruction_stap; - u32 instruction_storage_key; - u32 instruction_stsch; - u32 instruction_chsc; - u32 instruction_stsi; - u32 instruction_stfl; - u32 instruction_sigp_sense; - u32 instruction_sigp_emergency; - u32 instruction_sigp_stop; - u32 instruction_sigp_arch; - u32 instruction_sigp_prefix; - u32 instruction_sigp_restart; - u32 diagnose_44; -}; - -struct kvm_s390_io_info { - __u16 subchannel_id; /* 0x0b8 */ - __u16 subchannel_nr; /* 0x0ba */ - __u32 io_int_parm; /* 0x0bc */ - __u32 io_int_word; /* 0x0c0 */ -}; - -struct kvm_s390_ext_info { - __u32 ext_params; - __u64 ext_params2; -}; - -#define PGM_OPERATION 0x01 -#define PGM_PRIVILEGED_OPERATION 0x02 -#define PGM_EXECUTE 0x03 -#define PGM_PROTECTION 0x04 -#define PGM_ADDRESSING 0x05 -#define PGM_SPECIFICATION 0x06 -#define PGM_DATA 0x07 - -struct kvm_s390_pgm_info { - __u16 code; -}; - -struct kvm_s390_prefix_info { - __u32 address; -}; - -struct kvm_s390_interrupt_info { - struct list_head list; - u64 type; - union { - struct kvm_s390_io_info io; - struct kvm_s390_ext_info ext; - struct kvm_s390_pgm_info pgm; - struct kvm_s390_prefix_info prefix; - }; -}; - -/* for local_interrupt.action_flags */ -#define ACTION_STORE_ON_STOP 1 -#define ACTION_STOP_ON_STOP 2 - -struct kvm_s390_local_interrupt { - spinlock_t lock; - struct list_head list; - atomic_t active; - struct kvm_s390_float_interrupt *float_int; - int timer_due; /* event indicator for waitqueue below */ - wait_queue_head_t wq; - atomic_t *cpuflags; - unsigned int action_bits; -}; - -struct kvm_s390_float_interrupt { - spinlock_t lock; - struct list_head list; - atomic_t active; - int next_rr_cpu; - unsigned long idle_mask [(64 + sizeof(long) - 1) / sizeof(long)]; - struct kvm_s390_local_interrupt *local_int[64]; -}; - - -struct kvm_vcpu_arch { - struct kvm_s390_sie_block *sie_block; - unsigned long guest_gprs[16]; - s390_fp_regs host_fpregs; - unsigned int host_acrs[NUM_ACRS]; - s390_fp_regs guest_fpregs; - unsigned int guest_acrs[NUM_ACRS]; - struct kvm_s390_local_interrupt local_int; - struct timer_list ckc_timer; - union { - cpuid_t cpu_id; - u64 stidp_data; - }; -}; - -struct kvm_vm_stat { - u32 remote_tlb_flush; -}; - -struct kvm_arch{ - unsigned long guest_origin; - unsigned long guest_memsize; - struct sca_block *sca; - debug_info_t *dbf; - struct kvm_s390_float_interrupt float_int; -}; - -extern int sie64a(struct kvm_s390_sie_block *, unsigned long *); -#endif diff --git a/include/asm-s390/kvm_para.h b/include/asm-s390/kvm_para.h deleted file mode 100644 index 2c503796b619..000000000000 --- a/include/asm-s390/kvm_para.h +++ /dev/null @@ -1,150 +0,0 @@ -/* - * asm-s390/kvm_para.h - definition for paravirtual devices on s390 - * - * Copyright IBM Corp. 2008 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License (version 2 only) - * as published by the Free Software Foundation. - * - * Author(s): Christian Borntraeger - */ - -#ifndef __S390_KVM_PARA_H -#define __S390_KVM_PARA_H - -/* - * Hypercalls for KVM on s390. The calling convention is similar to the - * s390 ABI, so we use R2-R6 for parameters 1-5. In addition we use R1 - * as hypercall number and R7 as parameter 6. The return value is - * written to R2. We use the diagnose instruction as hypercall. To avoid - * conflicts with existing diagnoses for LPAR and z/VM, we do not use - * the instruction encoded number, but specify the number in R1 and - * use 0x500 as KVM hypercall - * - * Copyright IBM Corp. 2007,2008 - * Author(s): Christian Borntraeger - * - * This work is licensed under the terms of the GNU GPL, version 2. - */ - -static inline long kvm_hypercall0(unsigned long nr) -{ - register unsigned long __nr asm("1") = nr; - register long __rc asm("2"); - - asm volatile ("diag 2,4,0x500\n" - : "=d" (__rc) : "d" (__nr): "memory", "cc"); - return __rc; -} - -static inline long kvm_hypercall1(unsigned long nr, unsigned long p1) -{ - register unsigned long __nr asm("1") = nr; - register unsigned long __p1 asm("2") = p1; - register long __rc asm("2"); - - asm volatile ("diag 2,4,0x500\n" - : "=d" (__rc) : "d" (__nr), "0" (__p1) : "memory", "cc"); - return __rc; -} - -static inline long kvm_hypercall2(unsigned long nr, unsigned long p1, - unsigned long p2) -{ - register unsigned long __nr asm("1") = nr; - register unsigned long __p1 asm("2") = p1; - register unsigned long __p2 asm("3") = p2; - register long __rc asm("2"); - - asm volatile ("diag 2,4,0x500\n" - : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2) - : "memory", "cc"); - return __rc; -} - -static inline long kvm_hypercall3(unsigned long nr, unsigned long p1, - unsigned long p2, unsigned long p3) -{ - register unsigned long __nr asm("1") = nr; - register unsigned long __p1 asm("2") = p1; - register unsigned long __p2 asm("3") = p2; - register unsigned long __p3 asm("4") = p3; - register long __rc asm("2"); - - asm volatile ("diag 2,4,0x500\n" - : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2), - "d" (__p3) : "memory", "cc"); - return __rc; -} - - -static inline long kvm_hypercall4(unsigned long nr, unsigned long p1, - unsigned long p2, unsigned long p3, - unsigned long p4) -{ - register unsigned long __nr asm("1") = nr; - register unsigned long __p1 asm("2") = p1; - register unsigned long __p2 asm("3") = p2; - register unsigned long __p3 asm("4") = p3; - register unsigned long __p4 asm("5") = p4; - register long __rc asm("2"); - - asm volatile ("diag 2,4,0x500\n" - : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2), - "d" (__p3), "d" (__p4) : "memory", "cc"); - return __rc; -} - -static inline long kvm_hypercall5(unsigned long nr, unsigned long p1, - unsigned long p2, unsigned long p3, - unsigned long p4, unsigned long p5) -{ - register unsigned long __nr asm("1") = nr; - register unsigned long __p1 asm("2") = p1; - register unsigned long __p2 asm("3") = p2; - register unsigned long __p3 asm("4") = p3; - register unsigned long __p4 asm("5") = p4; - register unsigned long __p5 asm("6") = p5; - register long __rc asm("2"); - - asm volatile ("diag 2,4,0x500\n" - : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2), - "d" (__p3), "d" (__p4), "d" (__p5) : "memory", "cc"); - return __rc; -} - -static inline long kvm_hypercall6(unsigned long nr, unsigned long p1, - unsigned long p2, unsigned long p3, - unsigned long p4, unsigned long p5, - unsigned long p6) -{ - register unsigned long __nr asm("1") = nr; - register unsigned long __p1 asm("2") = p1; - register unsigned long __p2 asm("3") = p2; - register unsigned long __p3 asm("4") = p3; - register unsigned long __p4 asm("5") = p4; - register unsigned long __p5 asm("6") = p5; - register unsigned long __p6 asm("7") = p6; - register long __rc asm("2"); - - asm volatile ("diag 2,4,0x500\n" - : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2), - "d" (__p3), "d" (__p4), "d" (__p5), "d" (__p6) - : "memory", "cc"); - return __rc; -} - -/* kvm on s390 is always paravirtualization enabled */ -static inline int kvm_para_available(void) -{ - return 1; -} - -/* No feature bits are currently assigned for kvm on s390 */ -static inline unsigned int kvm_arch_para_features(void) -{ - return 0; -} - -#endif /* __S390_KVM_PARA_H */ diff --git a/include/asm-s390/kvm_virtio.h b/include/asm-s390/kvm_virtio.h deleted file mode 100644 index 146100224def..000000000000 --- a/include/asm-s390/kvm_virtio.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * kvm_virtio.h - definition for virtio for kvm on s390 - * - * Copyright IBM Corp. 2008 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License (version 2 only) - * as published by the Free Software Foundation. - * - * Author(s): Christian Borntraeger - */ - -#ifndef __KVM_S390_VIRTIO_H -#define __KVM_S390_VIRTIO_H - -#include - -struct kvm_device_desc { - /* The device type: console, network, disk etc. Type 0 terminates. */ - __u8 type; - /* The number of virtqueues (first in config array) */ - __u8 num_vq; - /* - * The number of bytes of feature bits. Multiply by 2: one for host - * features and one for guest acknowledgements. - */ - __u8 feature_len; - /* The number of bytes of the config array after virtqueues. */ - __u8 config_len; - /* A status byte, written by the Guest. */ - __u8 status; - __u8 config[0]; -}; - -/* - * This is how we expect the device configuration field for a virtqueue - * to be laid out in config space. - */ -struct kvm_vqconfig { - /* The token returned with an interrupt. Set by the guest */ - __u64 token; - /* The address of the virtio ring */ - __u64 address; - /* The number of entries in the virtio_ring */ - __u16 num; - -}; - -#define KVM_S390_VIRTIO_NOTIFY 0 -#define KVM_S390_VIRTIO_RESET 1 -#define KVM_S390_VIRTIO_SET_STATUS 2 - -#ifdef __KERNEL__ -/* early virtio console setup */ -#ifdef CONFIG_VIRTIO_CONSOLE -extern void s390_virtio_console_init(void); -#else -static inline void s390_virtio_console_init(void) -{ -} -#endif /* CONFIG_VIRTIO_CONSOLE */ -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-s390/linkage.h b/include/asm-s390/linkage.h deleted file mode 100644 index 291c2d01c44f..000000000000 --- a/include/asm-s390/linkage.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -/* Nothing to see here... */ - -#endif diff --git a/include/asm-s390/local.h b/include/asm-s390/local.h deleted file mode 100644 index c11c530f74d0..000000000000 --- a/include/asm-s390/local.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-s390/lowcore.h b/include/asm-s390/lowcore.h deleted file mode 100644 index 0bc51d52a899..000000000000 --- a/include/asm-s390/lowcore.h +++ /dev/null @@ -1,433 +0,0 @@ -/* - * include/asm-s390/lowcore.h - * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com), - * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) - */ - -#ifndef _ASM_S390_LOWCORE_H -#define _ASM_S390_LOWCORE_H - -#ifndef __s390x__ -#define __LC_EXT_OLD_PSW 0x018 -#define __LC_SVC_OLD_PSW 0x020 -#define __LC_PGM_OLD_PSW 0x028 -#define __LC_MCK_OLD_PSW 0x030 -#define __LC_IO_OLD_PSW 0x038 -#define __LC_EXT_NEW_PSW 0x058 -#define __LC_SVC_NEW_PSW 0x060 -#define __LC_PGM_NEW_PSW 0x068 -#define __LC_MCK_NEW_PSW 0x070 -#define __LC_IO_NEW_PSW 0x078 -#else /* !__s390x__ */ -#define __LC_EXT_OLD_PSW 0x0130 -#define __LC_SVC_OLD_PSW 0x0140 -#define __LC_PGM_OLD_PSW 0x0150 -#define __LC_MCK_OLD_PSW 0x0160 -#define __LC_IO_OLD_PSW 0x0170 -#define __LC_EXT_NEW_PSW 0x01b0 -#define __LC_SVC_NEW_PSW 0x01c0 -#define __LC_PGM_NEW_PSW 0x01d0 -#define __LC_MCK_NEW_PSW 0x01e0 -#define __LC_IO_NEW_PSW 0x01f0 -#endif /* !__s390x__ */ - -#define __LC_IPL_PARMBLOCK_PTR 0x014 -#define __LC_EXT_PARAMS 0x080 -#define __LC_CPU_ADDRESS 0x084 -#define __LC_EXT_INT_CODE 0x086 - -#define __LC_SVC_ILC 0x088 -#define __LC_SVC_INT_CODE 0x08A -#define __LC_PGM_ILC 0x08C -#define __LC_PGM_INT_CODE 0x08E - -#define __LC_PER_ATMID 0x096 -#define __LC_PER_ADDRESS 0x098 -#define __LC_PER_ACCESS_ID 0x0A1 -#define __LC_AR_MODE_ID 0x0A3 - -#define __LC_SUBCHANNEL_ID 0x0B8 -#define __LC_SUBCHANNEL_NR 0x0BA -#define __LC_IO_INT_PARM 0x0BC -#define __LC_IO_INT_WORD 0x0C0 -#define __LC_MCCK_CODE 0x0E8 - -#define __LC_LAST_BREAK 0x110 - -#define __LC_RETURN_PSW 0x200 - -#define __LC_SAVE_AREA 0xC00 - -#ifndef __s390x__ -#define __LC_IRB 0x208 -#define __LC_SYNC_ENTER_TIMER 0x248 -#define __LC_ASYNC_ENTER_TIMER 0x250 -#define __LC_EXIT_TIMER 0x258 -#define __LC_LAST_UPDATE_TIMER 0x260 -#define __LC_USER_TIMER 0x268 -#define __LC_SYSTEM_TIMER 0x270 -#define __LC_LAST_UPDATE_CLOCK 0x278 -#define __LC_STEAL_CLOCK 0x280 -#define __LC_RETURN_MCCK_PSW 0x288 -#define __LC_KERNEL_STACK 0xC40 -#define __LC_THREAD_INFO 0xC44 -#define __LC_ASYNC_STACK 0xC48 -#define __LC_KERNEL_ASCE 0xC4C -#define __LC_USER_ASCE 0xC50 -#define __LC_PANIC_STACK 0xC54 -#define __LC_CPUID 0xC60 -#define __LC_CPUADDR 0xC68 -#define __LC_IPLDEV 0xC7C -#define __LC_CURRENT 0xC90 -#define __LC_INT_CLOCK 0xC98 -#else /* __s390x__ */ -#define __LC_IRB 0x210 -#define __LC_SYNC_ENTER_TIMER 0x250 -#define __LC_ASYNC_ENTER_TIMER 0x258 -#define __LC_EXIT_TIMER 0x260 -#define __LC_LAST_UPDATE_TIMER 0x268 -#define __LC_USER_TIMER 0x270 -#define __LC_SYSTEM_TIMER 0x278 -#define __LC_LAST_UPDATE_CLOCK 0x280 -#define __LC_STEAL_CLOCK 0x288 -#define __LC_RETURN_MCCK_PSW 0x290 -#define __LC_KERNEL_STACK 0xD40 -#define __LC_THREAD_INFO 0xD48 -#define __LC_ASYNC_STACK 0xD50 -#define __LC_KERNEL_ASCE 0xD58 -#define __LC_USER_ASCE 0xD60 -#define __LC_PANIC_STACK 0xD68 -#define __LC_CPUID 0xD80 -#define __LC_CPUADDR 0xD88 -#define __LC_IPLDEV 0xDB8 -#define __LC_CURRENT 0xDD8 -#define __LC_INT_CLOCK 0xDE8 -#endif /* __s390x__ */ - - -#define __LC_PANIC_MAGIC 0xE00 -#ifndef __s390x__ -#define __LC_PFAULT_INTPARM 0x080 -#define __LC_CPU_TIMER_SAVE_AREA 0x0D8 -#define __LC_CLOCK_COMP_SAVE_AREA 0x0E0 -#define __LC_PSW_SAVE_AREA 0x100 -#define __LC_PREFIX_SAVE_AREA 0x108 -#define __LC_AREGS_SAVE_AREA 0x120 -#define __LC_FPREGS_SAVE_AREA 0x160 -#define __LC_GPREGS_SAVE_AREA 0x180 -#define __LC_CREGS_SAVE_AREA 0x1C0 -#else /* __s390x__ */ -#define __LC_PFAULT_INTPARM 0x11B8 -#define __LC_FPREGS_SAVE_AREA 0x1200 -#define __LC_GPREGS_SAVE_AREA 0x1280 -#define __LC_PSW_SAVE_AREA 0x1300 -#define __LC_PREFIX_SAVE_AREA 0x1318 -#define __LC_FP_CREG_SAVE_AREA 0x131C -#define __LC_TODREG_SAVE_AREA 0x1324 -#define __LC_CPU_TIMER_SAVE_AREA 0x1328 -#define __LC_CLOCK_COMP_SAVE_AREA 0x1331 -#define __LC_AREGS_SAVE_AREA 0x1340 -#define __LC_CREGS_SAVE_AREA 0x1380 -#endif /* __s390x__ */ - -#ifndef __ASSEMBLY__ - -#include -#include -#include - -void restart_int_handler(void); -void ext_int_handler(void); -void system_call(void); -void pgm_check_handler(void); -void mcck_int_handler(void); -void io_int_handler(void); - -struct save_area_s390 { - u32 ext_save; - u64 timer; - u64 clk_cmp; - u8 pad1[24]; - u8 psw[8]; - u32 pref_reg; - u8 pad2[20]; - u32 acc_regs[16]; - u64 fp_regs[4]; - u32 gp_regs[16]; - u32 ctrl_regs[16]; -} __attribute__((packed)); - -struct save_area_s390x { - u64 fp_regs[16]; - u64 gp_regs[16]; - u8 psw[16]; - u8 pad1[8]; - u32 pref_reg; - u32 fp_ctrl_reg; - u8 pad2[4]; - u32 tod_reg; - u64 timer; - u64 clk_cmp; - u8 pad3[8]; - u32 acc_regs[16]; - u64 ctrl_regs[16]; -} __attribute__((packed)); - -union save_area { - struct save_area_s390 s390; - struct save_area_s390x s390x; -}; - -#define SAVE_AREA_BASE_S390 0xd4 -#define SAVE_AREA_BASE_S390X 0x1200 - -#ifndef __s390x__ -#define SAVE_AREA_SIZE sizeof(struct save_area_s390) -#define SAVE_AREA_BASE SAVE_AREA_BASE_S390 -#else -#define SAVE_AREA_SIZE sizeof(struct save_area_s390x) -#define SAVE_AREA_BASE SAVE_AREA_BASE_S390X -#endif - -struct _lowcore -{ -#ifndef __s390x__ - /* prefix area: defined by architecture */ - psw_t restart_psw; /* 0x000 */ - __u32 ccw2[4]; /* 0x008 */ - psw_t external_old_psw; /* 0x018 */ - psw_t svc_old_psw; /* 0x020 */ - psw_t program_old_psw; /* 0x028 */ - psw_t mcck_old_psw; /* 0x030 */ - psw_t io_old_psw; /* 0x038 */ - __u8 pad1[0x58-0x40]; /* 0x040 */ - psw_t external_new_psw; /* 0x058 */ - psw_t svc_new_psw; /* 0x060 */ - psw_t program_new_psw; /* 0x068 */ - psw_t mcck_new_psw; /* 0x070 */ - psw_t io_new_psw; /* 0x078 */ - __u32 ext_params; /* 0x080 */ - __u16 cpu_addr; /* 0x084 */ - __u16 ext_int_code; /* 0x086 */ - __u16 svc_ilc; /* 0x088 */ - __u16 svc_code; /* 0x08a */ - __u16 pgm_ilc; /* 0x08c */ - __u16 pgm_code; /* 0x08e */ - __u32 trans_exc_code; /* 0x090 */ - __u16 mon_class_num; /* 0x094 */ - __u16 per_perc_atmid; /* 0x096 */ - __u32 per_address; /* 0x098 */ - __u32 monitor_code; /* 0x09c */ - __u8 exc_access_id; /* 0x0a0 */ - __u8 per_access_id; /* 0x0a1 */ - __u8 pad2[0xB8-0xA2]; /* 0x0a2 */ - __u16 subchannel_id; /* 0x0b8 */ - __u16 subchannel_nr; /* 0x0ba */ - __u32 io_int_parm; /* 0x0bc */ - __u32 io_int_word; /* 0x0c0 */ - __u8 pad3[0xc8-0xc4]; /* 0x0c4 */ - __u32 stfl_fac_list; /* 0x0c8 */ - __u8 pad4[0xd4-0xcc]; /* 0x0cc */ - __u32 extended_save_area_addr; /* 0x0d4 */ - __u32 cpu_timer_save_area[2]; /* 0x0d8 */ - __u32 clock_comp_save_area[2]; /* 0x0e0 */ - __u32 mcck_interruption_code[2]; /* 0x0e8 */ - __u8 pad5[0xf4-0xf0]; /* 0x0f0 */ - __u32 external_damage_code; /* 0x0f4 */ - __u32 failing_storage_address; /* 0x0f8 */ - __u8 pad6[0x100-0xfc]; /* 0x0fc */ - __u32 st_status_fixed_logout[4];/* 0x100 */ - __u8 pad7[0x120-0x110]; /* 0x110 */ - __u32 access_regs_save_area[16];/* 0x120 */ - __u32 floating_pt_save_area[8]; /* 0x160 */ - __u32 gpregs_save_area[16]; /* 0x180 */ - __u32 cregs_save_area[16]; /* 0x1c0 */ - - psw_t return_psw; /* 0x200 */ - __u8 irb[64]; /* 0x208 */ - __u64 sync_enter_timer; /* 0x248 */ - __u64 async_enter_timer; /* 0x250 */ - __u64 exit_timer; /* 0x258 */ - __u64 last_update_timer; /* 0x260 */ - __u64 user_timer; /* 0x268 */ - __u64 system_timer; /* 0x270 */ - __u64 last_update_clock; /* 0x278 */ - __u64 steal_clock; /* 0x280 */ - psw_t return_mcck_psw; /* 0x288 */ - __u8 pad8[0xc00-0x290]; /* 0x290 */ - - /* System info area */ - __u32 save_area[16]; /* 0xc00 */ - __u32 kernel_stack; /* 0xc40 */ - __u32 thread_info; /* 0xc44 */ - __u32 async_stack; /* 0xc48 */ - __u32 kernel_asce; /* 0xc4c */ - __u32 user_asce; /* 0xc50 */ - __u32 panic_stack; /* 0xc54 */ - __u32 user_exec_asce; /* 0xc58 */ - __u8 pad10[0xc60-0xc5c]; /* 0xc5c */ - /* entry.S sensitive area start */ - struct cpuinfo_S390 cpu_data; /* 0xc60 */ - __u32 ipl_device; /* 0xc7c */ - /* entry.S sensitive area end */ - - /* SMP info area: defined by DJB */ - __u64 clock_comparator; /* 0xc80 */ - __u32 ext_call_fast; /* 0xc88 */ - __u32 percpu_offset; /* 0xc8c */ - __u32 current_task; /* 0xc90 */ - __u32 softirq_pending; /* 0xc94 */ - __u64 int_clock; /* 0xc98 */ - __u8 pad11[0xe00-0xca0]; /* 0xca0 */ - - /* 0xe00 is used as indicator for dump tools */ - /* whether the kernel died with panic() or not */ - __u32 panic_magic; /* 0xe00 */ - - /* Align to the top 1k of prefix area */ - __u8 pad12[0x1000-0xe04]; /* 0xe04 */ -#else /* !__s390x__ */ - /* prefix area: defined by architecture */ - __u32 ccw1[2]; /* 0x000 */ - __u32 ccw2[4]; /* 0x008 */ - __u8 pad1[0x80-0x18]; /* 0x018 */ - __u32 ext_params; /* 0x080 */ - __u16 cpu_addr; /* 0x084 */ - __u16 ext_int_code; /* 0x086 */ - __u16 svc_ilc; /* 0x088 */ - __u16 svc_code; /* 0x08a */ - __u16 pgm_ilc; /* 0x08c */ - __u16 pgm_code; /* 0x08e */ - __u32 data_exc_code; /* 0x090 */ - __u16 mon_class_num; /* 0x094 */ - __u16 per_perc_atmid; /* 0x096 */ - addr_t per_address; /* 0x098 */ - __u8 exc_access_id; /* 0x0a0 */ - __u8 per_access_id; /* 0x0a1 */ - __u8 op_access_id; /* 0x0a2 */ - __u8 ar_access_id; /* 0x0a3 */ - __u8 pad2[0xA8-0xA4]; /* 0x0a4 */ - addr_t trans_exc_code; /* 0x0A0 */ - addr_t monitor_code; /* 0x09c */ - __u16 subchannel_id; /* 0x0b8 */ - __u16 subchannel_nr; /* 0x0ba */ - __u32 io_int_parm; /* 0x0bc */ - __u32 io_int_word; /* 0x0c0 */ - __u8 pad3[0xc8-0xc4]; /* 0x0c4 */ - __u32 stfl_fac_list; /* 0x0c8 */ - __u8 pad4[0xe8-0xcc]; /* 0x0cc */ - __u32 mcck_interruption_code[2]; /* 0x0e8 */ - __u8 pad5[0xf4-0xf0]; /* 0x0f0 */ - __u32 external_damage_code; /* 0x0f4 */ - addr_t failing_storage_address; /* 0x0f8 */ - __u8 pad6[0x120-0x100]; /* 0x100 */ - psw_t restart_old_psw; /* 0x120 */ - psw_t external_old_psw; /* 0x130 */ - psw_t svc_old_psw; /* 0x140 */ - psw_t program_old_psw; /* 0x150 */ - psw_t mcck_old_psw; /* 0x160 */ - psw_t io_old_psw; /* 0x170 */ - __u8 pad7[0x1a0-0x180]; /* 0x180 */ - psw_t restart_psw; /* 0x1a0 */ - psw_t external_new_psw; /* 0x1b0 */ - psw_t svc_new_psw; /* 0x1c0 */ - psw_t program_new_psw; /* 0x1d0 */ - psw_t mcck_new_psw; /* 0x1e0 */ - psw_t io_new_psw; /* 0x1f0 */ - psw_t return_psw; /* 0x200 */ - __u8 irb[64]; /* 0x210 */ - __u64 sync_enter_timer; /* 0x250 */ - __u64 async_enter_timer; /* 0x258 */ - __u64 exit_timer; /* 0x260 */ - __u64 last_update_timer; /* 0x268 */ - __u64 user_timer; /* 0x270 */ - __u64 system_timer; /* 0x278 */ - __u64 last_update_clock; /* 0x280 */ - __u64 steal_clock; /* 0x288 */ - psw_t return_mcck_psw; /* 0x290 */ - __u8 pad8[0xc00-0x2a0]; /* 0x2a0 */ - /* System info area */ - __u64 save_area[16]; /* 0xc00 */ - __u8 pad9[0xd40-0xc80]; /* 0xc80 */ - __u64 kernel_stack; /* 0xd40 */ - __u64 thread_info; /* 0xd48 */ - __u64 async_stack; /* 0xd50 */ - __u64 kernel_asce; /* 0xd58 */ - __u64 user_asce; /* 0xd60 */ - __u64 panic_stack; /* 0xd68 */ - __u64 user_exec_asce; /* 0xd70 */ - __u8 pad10[0xd80-0xd78]; /* 0xd78 */ - /* entry.S sensitive area start */ - struct cpuinfo_S390 cpu_data; /* 0xd80 */ - __u32 ipl_device; /* 0xdb8 */ - __u32 pad11; /* 0xdbc */ - /* entry.S sensitive area end */ - - /* SMP info area: defined by DJB */ - __u64 clock_comparator; /* 0xdc0 */ - __u64 ext_call_fast; /* 0xdc8 */ - __u64 percpu_offset; /* 0xdd0 */ - __u64 current_task; /* 0xdd8 */ - __u32 softirq_pending; /* 0xde0 */ - __u32 pad_0x0de4; /* 0xde4 */ - __u64 int_clock; /* 0xde8 */ - __u8 pad12[0xe00-0xdf0]; /* 0xdf0 */ - - /* 0xe00 is used as indicator for dump tools */ - /* whether the kernel died with panic() or not */ - __u32 panic_magic; /* 0xe00 */ - - __u8 pad13[0x11b8-0xe04]; /* 0xe04 */ - - /* 64 bit extparam used for pfault, diag 250 etc */ - __u64 ext_params2; /* 0x11B8 */ - - __u8 pad14[0x1200-0x11C0]; /* 0x11C0 */ - - /* System info area */ - - __u64 floating_pt_save_area[16]; /* 0x1200 */ - __u64 gpregs_save_area[16]; /* 0x1280 */ - __u32 st_status_fixed_logout[4]; /* 0x1300 */ - __u8 pad15[0x1318-0x1310]; /* 0x1310 */ - __u32 prefixreg_save_area; /* 0x1318 */ - __u32 fpt_creg_save_area; /* 0x131c */ - __u8 pad16[0x1324-0x1320]; /* 0x1320 */ - __u32 tod_progreg_save_area; /* 0x1324 */ - __u32 cpu_timer_save_area[2]; /* 0x1328 */ - __u32 clock_comp_save_area[2]; /* 0x1330 */ - __u8 pad17[0x1340-0x1338]; /* 0x1338 */ - __u32 access_regs_save_area[16]; /* 0x1340 */ - __u64 cregs_save_area[16]; /* 0x1380 */ - - /* align to the top of the prefix area */ - - __u8 pad18[0x2000-0x1400]; /* 0x1400 */ -#endif /* !__s390x__ */ -} __attribute__((packed)); /* End structure*/ - -#define S390_lowcore (*((struct _lowcore *) 0)) -extern struct _lowcore *lowcore_ptr[]; - -static inline void set_prefix(__u32 address) -{ - asm volatile("spx %0" : : "m" (address) : "memory"); -} - -static inline __u32 store_prefix(void) -{ - __u32 address; - - asm volatile("stpx %0" : "=m" (address)); - return address; -} - -#define __PANIC_MAGIC 0xDEADC0DE - -#endif - -#endif diff --git a/include/asm-s390/mathemu.h b/include/asm-s390/mathemu.h deleted file mode 100644 index e8dd1ba8edb0..000000000000 --- a/include/asm-s390/mathemu.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * arch/s390/kernel/mathemu.h - * IEEE floating point emulation. - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) - */ - -#ifndef __MATHEMU__ -#define __MATHEMU__ - -extern int math_emu_b3(__u8 *, struct pt_regs *); -extern int math_emu_ed(__u8 *, struct pt_regs *); -extern int math_emu_ldr(__u8 *); -extern int math_emu_ler(__u8 *); -extern int math_emu_std(__u8 *, struct pt_regs *); -extern int math_emu_ld(__u8 *, struct pt_regs *); -extern int math_emu_ste(__u8 *, struct pt_regs *); -extern int math_emu_le(__u8 *, struct pt_regs *); -extern int math_emu_lfpc(__u8 *, struct pt_regs *); -extern int math_emu_stfpc(__u8 *, struct pt_regs *); -extern int math_emu_srnm(__u8 *, struct pt_regs *); - -#endif /* __MATHEMU__ */ - - - - diff --git a/include/asm-s390/mman.h b/include/asm-s390/mman.h deleted file mode 100644 index 7839767d837e..000000000000 --- a/include/asm-s390/mman.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * include/asm-s390/mman.h - * - * S390 version - * - * Derived from "include/asm-i386/mman.h" - */ - -#ifndef __S390_MMAN_H__ -#define __S390_MMAN_H__ - -#include - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* __S390_MMAN_H__ */ diff --git a/include/asm-s390/mmu.h b/include/asm-s390/mmu.h deleted file mode 100644 index 5dd5e7b3476f..000000000000 --- a/include/asm-s390/mmu.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __MMU_H -#define __MMU_H - -typedef struct { - struct list_head crst_list; - struct list_head pgtable_list; - unsigned long asce_bits; - unsigned long asce_limit; - int noexec; - int pgstes; -} mm_context_t; - -#endif diff --git a/include/asm-s390/mmu_context.h b/include/asm-s390/mmu_context.h deleted file mode 100644 index 4c2fbf48c9c4..000000000000 --- a/include/asm-s390/mmu_context.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * include/asm-s390/mmu_context.h - * - * S390 version - * - * Derived from "include/asm-i386/mmu_context.h" - */ - -#ifndef __S390_MMU_CONTEXT_H -#define __S390_MMU_CONTEXT_H - -#include -#include -#include - -static inline int init_new_context(struct task_struct *tsk, - struct mm_struct *mm) -{ - mm->context.asce_bits = _ASCE_TABLE_LENGTH | _ASCE_USER_BITS; -#ifdef CONFIG_64BIT - mm->context.asce_bits |= _ASCE_TYPE_REGION3; -#endif - if (current->mm->context.pgstes) { - mm->context.noexec = 0; - mm->context.pgstes = 1; - } else { - mm->context.noexec = s390_noexec; - mm->context.pgstes = 0; - } - mm->context.asce_limit = STACK_TOP_MAX; - crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm)); - return 0; -} - -#define destroy_context(mm) do { } while (0) - -#ifndef __s390x__ -#define LCTL_OPCODE "lctl" -#else -#define LCTL_OPCODE "lctlg" -#endif - -static inline void update_mm(struct mm_struct *mm, struct task_struct *tsk) -{ - pgd_t *pgd = mm->pgd; - - S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd); - if (switch_amode) { - /* Load primary space page table origin. */ - pgd = mm->context.noexec ? get_shadow_table(pgd) : pgd; - S390_lowcore.user_exec_asce = mm->context.asce_bits | __pa(pgd); - asm volatile(LCTL_OPCODE" 1,1,%0\n" - : : "m" (S390_lowcore.user_exec_asce) ); - } else - /* Load home space page table origin. */ - asm volatile(LCTL_OPCODE" 13,13,%0" - : : "m" (S390_lowcore.user_asce) ); - set_fs(current->thread.mm_segment); -} - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ - cpu_set(smp_processor_id(), next->cpu_vm_mask); - update_mm(next, tsk); -} - -#define enter_lazy_tlb(mm,tsk) do { } while (0) -#define deactivate_mm(tsk,mm) do { } while (0) - -static inline void activate_mm(struct mm_struct *prev, - struct mm_struct *next) -{ - switch_mm(prev, next, current); -} - -#endif /* __S390_MMU_CONTEXT_H */ diff --git a/include/asm-s390/module.h b/include/asm-s390/module.h deleted file mode 100644 index 1cc1c5af705a..000000000000 --- a/include/asm-s390/module.h +++ /dev/null @@ -1,46 +0,0 @@ -#ifndef _ASM_S390_MODULE_H -#define _ASM_S390_MODULE_H -/* - * This file contains the s390 architecture specific module code. - */ - -struct mod_arch_syminfo -{ - unsigned long got_offset; - unsigned long plt_offset; - int got_initialized; - int plt_initialized; -}; - -struct mod_arch_specific -{ - /* Starting offset of got in the module core memory. */ - unsigned long got_offset; - /* Starting offset of plt in the module core memory. */ - unsigned long plt_offset; - /* Size of the got. */ - unsigned long got_size; - /* Size of the plt. */ - unsigned long plt_size; - /* Number of symbols in syminfo. */ - int nsyms; - /* Additional symbol information (got and plt offsets). */ - struct mod_arch_syminfo *syminfo; -}; - -#ifdef __s390x__ -#define ElfW(x) Elf64_ ## x -#define ELFW(x) ELF64_ ## x -#else -#define ElfW(x) Elf32_ ## x -#define ELFW(x) ELF32_ ## x -#endif - -#define Elf_Addr ElfW(Addr) -#define Elf_Rela ElfW(Rela) -#define Elf_Shdr ElfW(Shdr) -#define Elf_Sym ElfW(Sym) -#define Elf_Ehdr ElfW(Ehdr) -#define ELF_R_SYM ELFW(R_SYM) -#define ELF_R_TYPE ELFW(R_TYPE) -#endif /* _ASM_S390_MODULE_H */ diff --git a/include/asm-s390/monwriter.h b/include/asm-s390/monwriter.h deleted file mode 100644 index f0cbf96c52e6..000000000000 --- a/include/asm-s390/monwriter.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-s390/monwriter.h - * - * Copyright (C) IBM Corp. 2006 - * Character device driver for writing z/VM APPLDATA monitor records - * Version 1.0 - * Author(s): Melissa Howland - * - */ - -#ifndef _ASM_390_MONWRITER_H -#define _ASM_390_MONWRITER_H - -/* mon_function values */ -#define MONWRITE_START_INTERVAL 0x00 /* start interval recording */ -#define MONWRITE_STOP_INTERVAL 0x01 /* stop interval or config recording */ -#define MONWRITE_GEN_EVENT 0x02 /* generate event record */ -#define MONWRITE_START_CONFIG 0x03 /* start configuration recording */ - -/* the header the app uses in its write() data */ -struct monwrite_hdr { - unsigned char mon_function; - unsigned short applid; - unsigned char record_num; - unsigned short version; - unsigned short release; - unsigned short mod_level; - unsigned short datalen; - unsigned char hdrlen; - -} __attribute__((packed)); - -#endif /* _ASM_390_MONWRITER_H */ diff --git a/include/asm-s390/msgbuf.h b/include/asm-s390/msgbuf.h deleted file mode 100644 index 1bbdee927924..000000000000 --- a/include/asm-s390/msgbuf.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef _S390_MSGBUF_H -#define _S390_MSGBUF_H - -/* - * The msqid64_ds structure for S/390 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ -#ifndef __s390x__ - unsigned long __unused1; -#endif /* ! __s390x__ */ - __kernel_time_t msg_rtime; /* last msgrcv time */ -#ifndef __s390x__ - unsigned long __unused2; -#endif /* ! __s390x__ */ - __kernel_time_t msg_ctime; /* last change time */ -#ifndef __s390x__ - unsigned long __unused3; -#endif /* ! __s390x__ */ - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _S390_MSGBUF_H */ diff --git a/include/asm-s390/mutex.h b/include/asm-s390/mutex.h deleted file mode 100644 index 458c1f7fbc18..000000000000 --- a/include/asm-s390/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/include/asm-s390/page.h b/include/asm-s390/page.h deleted file mode 100644 index 991ba939408c..000000000000 --- a/include/asm-s390/page.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - * include/asm-s390/page.h - * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com) - */ - -#ifndef _S390_PAGE_H -#define _S390_PAGE_H - -#include -#include - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) -#define PAGE_DEFAULT_ACC 0 -#define PAGE_DEFAULT_KEY (PAGE_DEFAULT_ACC << 4) - -#define HPAGE_SHIFT 20 -#define HPAGE_SIZE (1UL << HPAGE_SHIFT) -#define HPAGE_MASK (~(HPAGE_SIZE - 1)) -#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) - -#define ARCH_HAS_SETCLEAR_HUGE_PTE -#define ARCH_HAS_HUGE_PTE_TYPE -#define ARCH_HAS_PREPARE_HUGEPAGE -#define ARCH_HAS_HUGEPAGE_CLEAR_FLUSH - -#include -#ifndef __ASSEMBLY__ - -static inline void clear_page(void *page) -{ - if (MACHINE_HAS_PFMF) { - asm volatile( - " .insn rre,0xb9af0000,%0,%1" - : : "d" (0x10000), "a" (page) : "memory", "cc"); - } else { - register unsigned long reg1 asm ("1") = 0; - register void *reg2 asm ("2") = page; - register unsigned long reg3 asm ("3") = 4096; - asm volatile( - " mvcl 2,0" - : "+d" (reg2), "+d" (reg3) : "d" (reg1) - : "memory", "cc"); - } -} - -static inline void copy_page(void *to, void *from) -{ - if (MACHINE_HAS_MVPG) { - register unsigned long reg0 asm ("0") = 0; - asm volatile( - " mvpg %0,%1" - : : "a" (to), "a" (from), "d" (reg0) - : "memory", "cc"); - } else - asm volatile( - " mvc 0(256,%0),0(%1)\n" - " mvc 256(256,%0),256(%1)\n" - " mvc 512(256,%0),512(%1)\n" - " mvc 768(256,%0),768(%1)\n" - " mvc 1024(256,%0),1024(%1)\n" - " mvc 1280(256,%0),1280(%1)\n" - " mvc 1536(256,%0),1536(%1)\n" - " mvc 1792(256,%0),1792(%1)\n" - " mvc 2048(256,%0),2048(%1)\n" - " mvc 2304(256,%0),2304(%1)\n" - " mvc 2560(256,%0),2560(%1)\n" - " mvc 2816(256,%0),2816(%1)\n" - " mvc 3072(256,%0),3072(%1)\n" - " mvc 3328(256,%0),3328(%1)\n" - " mvc 3584(256,%0),3584(%1)\n" - " mvc 3840(256,%0),3840(%1)\n" - : : "a" (to), "a" (from) : "memory"); -} - -#define clear_user_page(page, vaddr, pg) clear_page(page) -#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) - -#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ - alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) -#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE - -/* - * These are used to make use of C type-checking.. - */ - -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pmd; } pmd_t; -typedef struct { unsigned long pud; } pud_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef pte_t *pgtable_t; - -#define pgprot_val(x) ((x).pgprot) -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((x).pmd) -#define pud_val(x) ((x).pud) -#define pgd_val(x) ((x).pgd) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -/* default storage key used for all pages */ -extern unsigned int default_storage_key; - -static inline void -page_set_storage_key(unsigned long addr, unsigned int skey) -{ - asm volatile("sske %0,%1" : : "d" (skey), "a" (addr)); -} - -static inline unsigned int -page_get_storage_key(unsigned long addr) -{ - unsigned int skey; - - asm volatile("iske %0,%1" : "=d" (skey) : "a" (addr), "0" (0)); - return skey; -} - -#ifdef CONFIG_PAGE_STATES - -struct page; -void arch_free_page(struct page *page, int order); -void arch_alloc_page(struct page *page, int order); - -#define HAVE_ARCH_FREE_PAGE -#define HAVE_ARCH_ALLOC_PAGE - -#endif - -#endif /* !__ASSEMBLY__ */ - -#define __PAGE_OFFSET 0x0UL -#define PAGE_OFFSET 0x0UL -#define __pa(x) (unsigned long)(x) -#define __va(x) (void *)(unsigned long)(x) -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#include -#include - -#endif /* _S390_PAGE_H */ diff --git a/include/asm-s390/param.h b/include/asm-s390/param.h deleted file mode 100644 index 34aaa4603347..000000000000 --- a/include/asm-s390/param.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * include/asm-s390/param.h - * - * S390 version - * - * Derived from "include/asm-i386/param.h" - */ - -#ifndef _ASMS390_PARAM_H -#define _ASMS390_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif diff --git a/include/asm-s390/pci.h b/include/asm-s390/pci.h deleted file mode 100644 index 42a145c9ddd6..000000000000 --- a/include/asm-s390/pci.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_S390_PCI_H -#define __ASM_S390_PCI_H - -/* S/390 systems don't have a PCI bus. This file is just here because some stupid .c code - * includes it even if CONFIG_PCI is not set. - */ -#define PCI_DMA_BUS_IS_PHYS (0) - -#endif /* __ASM_S390_PCI_H */ - diff --git a/include/asm-s390/percpu.h b/include/asm-s390/percpu.h deleted file mode 100644 index 408d60b4f75b..000000000000 --- a/include/asm-s390/percpu.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef __ARCH_S390_PERCPU__ -#define __ARCH_S390_PERCPU__ - -#include -#include - -/* - * s390 uses its own implementation for per cpu data, the offset of - * the cpu local data area is cached in the cpu's lowcore memory. - * For 64 bit module code s390 forces the use of a GOT slot for the - * address of the per cpu variable. This is needed because the module - * may be more than 4G above the per cpu area. - */ -#if defined(__s390x__) && defined(MODULE) - -#define SHIFT_PERCPU_PTR(ptr,offset) (({ \ - extern int simple_identifier_##var(void); \ - unsigned long *__ptr; \ - asm ( "larl %0, %1@GOTENT" \ - : "=a" (__ptr) : "X" (ptr) ); \ - (typeof(ptr))((*__ptr) + (offset)); })) - -#else - -#define SHIFT_PERCPU_PTR(ptr, offset) (({ \ - extern int simple_identifier_##var(void); \ - unsigned long __ptr; \ - asm ( "" : "=a" (__ptr) : "0" (ptr) ); \ - (typeof(ptr)) (__ptr + (offset)); })) - -#endif - -#define __my_cpu_offset S390_lowcore.percpu_offset - -#include - -#endif /* __ARCH_S390_PERCPU__ */ diff --git a/include/asm-s390/pgalloc.h b/include/asm-s390/pgalloc.h deleted file mode 100644 index f5b2bf3d7c1d..000000000000 --- a/include/asm-s390/pgalloc.h +++ /dev/null @@ -1,174 +0,0 @@ -/* - * include/asm-s390/pgalloc.h - * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com) - * Martin Schwidefsky (schwidefsky@de.ibm.com) - * - * Derived from "include/asm-i386/pgalloc.h" - * Copyright (C) 1994 Linus Torvalds - */ - -#ifndef _S390_PGALLOC_H -#define _S390_PGALLOC_H - -#include -#include -#include - -#define check_pgt_cache() do {} while (0) - -unsigned long *crst_table_alloc(struct mm_struct *, int); -void crst_table_free(struct mm_struct *, unsigned long *); - -unsigned long *page_table_alloc(struct mm_struct *); -void page_table_free(struct mm_struct *, unsigned long *); -void disable_noexec(struct mm_struct *, struct task_struct *); - -static inline void clear_table(unsigned long *s, unsigned long val, size_t n) -{ - *s = val; - n = (n / 256) - 1; - asm volatile( -#ifdef CONFIG_64BIT - " mvc 8(248,%0),0(%0)\n" -#else - " mvc 4(252,%0),0(%0)\n" -#endif - "0: mvc 256(256,%0),0(%0)\n" - " la %0,256(%0)\n" - " brct %1,0b\n" - : "+a" (s), "+d" (n)); -} - -static inline void crst_table_init(unsigned long *crst, unsigned long entry) -{ - clear_table(crst, entry, sizeof(unsigned long)*2048); - crst = get_shadow_table(crst); - if (crst) - clear_table(crst, entry, sizeof(unsigned long)*2048); -} - -#ifndef __s390x__ - -static inline unsigned long pgd_entry_type(struct mm_struct *mm) -{ - return _SEGMENT_ENTRY_EMPTY; -} - -#define pud_alloc_one(mm,address) ({ BUG(); ((pud_t *)2); }) -#define pud_free(mm, x) do { } while (0) - -#define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) -#define pmd_free(mm, x) do { } while (0) - -#define pgd_populate(mm, pgd, pud) BUG() -#define pgd_populate_kernel(mm, pgd, pud) BUG() - -#define pud_populate(mm, pud, pmd) BUG() -#define pud_populate_kernel(mm, pud, pmd) BUG() - -#else /* __s390x__ */ - -static inline unsigned long pgd_entry_type(struct mm_struct *mm) -{ - if (mm->context.asce_limit <= (1UL << 31)) - return _SEGMENT_ENTRY_EMPTY; - if (mm->context.asce_limit <= (1UL << 42)) - return _REGION3_ENTRY_EMPTY; - return _REGION2_ENTRY_EMPTY; -} - -int crst_table_upgrade(struct mm_struct *, unsigned long limit); -void crst_table_downgrade(struct mm_struct *, unsigned long limit); - -static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address) -{ - unsigned long *table = crst_table_alloc(mm, mm->context.noexec); - if (table) - crst_table_init(table, _REGION3_ENTRY_EMPTY); - return (pud_t *) table; -} -#define pud_free(mm, pud) crst_table_free(mm, (unsigned long *) pud) - -static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr) -{ - unsigned long *table = crst_table_alloc(mm, mm->context.noexec); - if (table) - crst_table_init(table, _SEGMENT_ENTRY_EMPTY); - return (pmd_t *) table; -} -#define pmd_free(mm, pmd) crst_table_free(mm, (unsigned long *) pmd) - -static inline void pgd_populate_kernel(struct mm_struct *mm, - pgd_t *pgd, pud_t *pud) -{ - pgd_val(*pgd) = _REGION2_ENTRY | __pa(pud); -} - -static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud) -{ - pgd_populate_kernel(mm, pgd, pud); - if (mm->context.noexec) { - pgd = get_shadow_table(pgd); - pud = get_shadow_table(pud); - pgd_populate_kernel(mm, pgd, pud); - } -} - -static inline void pud_populate_kernel(struct mm_struct *mm, - pud_t *pud, pmd_t *pmd) -{ - pud_val(*pud) = _REGION3_ENTRY | __pa(pmd); -} - -static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) -{ - pud_populate_kernel(mm, pud, pmd); - if (mm->context.noexec) { - pud = get_shadow_table(pud); - pmd = get_shadow_table(pmd); - pud_populate_kernel(mm, pud, pmd); - } -} - -#endif /* __s390x__ */ - -static inline pgd_t *pgd_alloc(struct mm_struct *mm) -{ - INIT_LIST_HEAD(&mm->context.crst_list); - INIT_LIST_HEAD(&mm->context.pgtable_list); - return (pgd_t *) crst_table_alloc(mm, s390_noexec); -} -#define pgd_free(mm, pgd) crst_table_free(mm, (unsigned long *) pgd) - -static inline void pmd_populate_kernel(struct mm_struct *mm, - pmd_t *pmd, pte_t *pte) -{ - pmd_val(*pmd) = _SEGMENT_ENTRY + __pa(pte); -} - -static inline void pmd_populate(struct mm_struct *mm, - pmd_t *pmd, pgtable_t pte) -{ - pmd_populate_kernel(mm, pmd, pte); - if (mm->context.noexec) { - pmd = get_shadow_table(pmd); - pmd_populate_kernel(mm, pmd, pte + PTRS_PER_PTE); - } -} - -#define pmd_pgtable(pmd) \ - (pgtable_t)(pmd_val(pmd) & -sizeof(pte_t)*PTRS_PER_PTE) - -/* - * page table entry allocation/free routines. - */ -#define pte_alloc_one_kernel(mm, vmaddr) ((pte_t *) page_table_alloc(mm)) -#define pte_alloc_one(mm, vmaddr) ((pte_t *) page_table_alloc(mm)) - -#define pte_free_kernel(mm, pte) page_table_free(mm, (unsigned long *) pte) -#define pte_free(mm, pte) page_table_free(mm, (unsigned long *) pte) - -#endif /* _S390_PGALLOC_H */ diff --git a/include/asm-s390/pgtable.h b/include/asm-s390/pgtable.h deleted file mode 100644 index 0bdb704ae051..000000000000 --- a/include/asm-s390/pgtable.h +++ /dev/null @@ -1,1093 +0,0 @@ -/* - * include/asm-s390/pgtable.h - * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com) - * Ulrich Weigand (weigand@de.ibm.com) - * Martin Schwidefsky (schwidefsky@de.ibm.com) - * - * Derived from "include/asm-i386/pgtable.h" - */ - -#ifndef _ASM_S390_PGTABLE_H -#define _ASM_S390_PGTABLE_H - -/* - * The Linux memory management assumes a three-level page table setup. For - * s390 31 bit we "fold" the mid level into the top-level page table, so - * that we physically have the same two-level page table as the s390 mmu - * expects in 31 bit mode. For s390 64 bit we use three of the five levels - * the hardware provides (region first and region second tables are not - * used). - * - * The "pgd_xxx()" functions are trivial for a folded two-level - * setup: the pgd is never bad, and a pmd always exists (as it's folded - * into the pgd entry) - * - * This file contains the functions and defines necessary to modify and use - * the S390 page table tree. - */ -#ifndef __ASSEMBLY__ -#include -#include -#include -#include -#include - -extern pgd_t swapper_pg_dir[] __attribute__ ((aligned (4096))); -extern void paging_init(void); -extern void vmem_map_init(void); - -/* - * The S390 doesn't have any external MMU info: the kernel page - * tables contain all the necessary information. - */ -#define update_mmu_cache(vma, address, pte) do { } while (0) - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern char empty_zero_page[PAGE_SIZE]; -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) -#endif /* !__ASSEMBLY__ */ - -/* - * PMD_SHIFT determines the size of the area a second-level page - * table can map - * PGDIR_SHIFT determines what a third-level page table entry can map - */ -#ifndef __s390x__ -# define PMD_SHIFT 20 -# define PUD_SHIFT 20 -# define PGDIR_SHIFT 20 -#else /* __s390x__ */ -# define PMD_SHIFT 20 -# define PUD_SHIFT 31 -# define PGDIR_SHIFT 42 -#endif /* __s390x__ */ - -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) -#define PUD_SIZE (1UL << PUD_SHIFT) -#define PUD_MASK (~(PUD_SIZE-1)) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* - * entries per page directory level: the S390 is two-level, so - * we don't really have any PMD directory physically. - * for S390 segment-table entries are combined to one PGD - * that leads to 1024 pte per pgd - */ -#define PTRS_PER_PTE 256 -#ifndef __s390x__ -#define PTRS_PER_PMD 1 -#define PTRS_PER_PUD 1 -#else /* __s390x__ */ -#define PTRS_PER_PMD 2048 -#define PTRS_PER_PUD 2048 -#endif /* __s390x__ */ -#define PTRS_PER_PGD 2048 - -#define FIRST_USER_ADDRESS 0 - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %p.\n", __FILE__, __LINE__, (void *) pte_val(e)) -#define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %p.\n", __FILE__, __LINE__, (void *) pmd_val(e)) -#define pud_ERROR(e) \ - printk("%s:%d: bad pud %p.\n", __FILE__, __LINE__, (void *) pud_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %p.\n", __FILE__, __LINE__, (void *) pgd_val(e)) - -#ifndef __ASSEMBLY__ -/* - * The vmalloc area will always be on the topmost area of the kernel - * mapping. We reserve 96MB (31bit) / 1GB (64bit) for vmalloc, - * which should be enough for any sane case. - * By putting vmalloc at the top, we maximise the gap between physical - * memory and vmalloc to catch misplaced memory accesses. As a side - * effect, this also makes sure that 64 bit module code cannot be used - * as system call address. - */ -#ifndef __s390x__ -#define VMALLOC_START 0x78000000UL -#define VMALLOC_END 0x7e000000UL -#define VMEM_MAP_END 0x80000000UL -#else /* __s390x__ */ -#define VMALLOC_START 0x3e000000000UL -#define VMALLOC_END 0x3e040000000UL -#define VMEM_MAP_END 0x40000000000UL -#endif /* __s390x__ */ - -/* - * VMEM_MAX_PHYS is the highest physical address that can be added to the 1:1 - * mapping. This needs to be calculated at compile time since the size of the - * VMEM_MAP is static but the size of struct page can change. - */ -#define VMEM_MAX_PAGES ((VMEM_MAP_END - VMALLOC_END) / sizeof(struct page)) -#define VMEM_MAX_PFN min(VMALLOC_START >> PAGE_SHIFT, VMEM_MAX_PAGES) -#define VMEM_MAX_PHYS ((VMEM_MAX_PFN << PAGE_SHIFT) & ~((16 << 20) - 1)) -#define vmemmap ((struct page *) VMALLOC_END) - -/* - * A 31 bit pagetable entry of S390 has following format: - * | PFRA | | OS | - * 0 0IP0 - * 00000000001111111111222222222233 - * 01234567890123456789012345678901 - * - * I Page-Invalid Bit: Page is not available for address-translation - * P Page-Protection Bit: Store access not possible for page - * - * A 31 bit segmenttable entry of S390 has following format: - * | P-table origin | |PTL - * 0 IC - * 00000000001111111111222222222233 - * 01234567890123456789012345678901 - * - * I Segment-Invalid Bit: Segment is not available for address-translation - * C Common-Segment Bit: Segment is not private (PoP 3-30) - * PTL Page-Table-Length: Page-table length (PTL+1*16 entries -> up to 256) - * - * The 31 bit segmenttable origin of S390 has following format: - * - * |S-table origin | | STL | - * X **GPS - * 00000000001111111111222222222233 - * 01234567890123456789012345678901 - * - * X Space-Switch event: - * G Segment-Invalid Bit: * - * P Private-Space Bit: Segment is not private (PoP 3-30) - * S Storage-Alteration: - * STL Segment-Table-Length: Segment-table length (STL+1*16 entries -> up to 2048) - * - * A 64 bit pagetable entry of S390 has following format: - * | PFRA |0IP0| OS | - * 0000000000111111111122222222223333333333444444444455555555556666 - * 0123456789012345678901234567890123456789012345678901234567890123 - * - * I Page-Invalid Bit: Page is not available for address-translation - * P Page-Protection Bit: Store access not possible for page - * - * A 64 bit segmenttable entry of S390 has following format: - * | P-table origin | TT - * 0000000000111111111122222222223333333333444444444455555555556666 - * 0123456789012345678901234567890123456789012345678901234567890123 - * - * I Segment-Invalid Bit: Segment is not available for address-translation - * C Common-Segment Bit: Segment is not private (PoP 3-30) - * P Page-Protection Bit: Store access not possible for page - * TT Type 00 - * - * A 64 bit region table entry of S390 has following format: - * | S-table origin | TF TTTL - * 0000000000111111111122222222223333333333444444444455555555556666 - * 0123456789012345678901234567890123456789012345678901234567890123 - * - * I Segment-Invalid Bit: Segment is not available for address-translation - * TT Type 01 - * TF - * TL Table length - * - * The 64 bit regiontable origin of S390 has following format: - * | region table origon | DTTL - * 0000000000111111111122222222223333333333444444444455555555556666 - * 0123456789012345678901234567890123456789012345678901234567890123 - * - * X Space-Switch event: - * G Segment-Invalid Bit: - * P Private-Space Bit: - * S Storage-Alteration: - * R Real space - * TL Table-Length: - * - * A storage key has the following format: - * | ACC |F|R|C|0| - * 0 3 4 5 6 7 - * ACC: access key - * F : fetch protection bit - * R : referenced bit - * C : changed bit - */ - -/* Hardware bits in the page table entry */ -#define _PAGE_RO 0x200 /* HW read-only bit */ -#define _PAGE_INVALID 0x400 /* HW invalid bit */ - -/* Software bits in the page table entry */ -#define _PAGE_SWT 0x001 /* SW pte type bit t */ -#define _PAGE_SWX 0x002 /* SW pte type bit x */ -#define _PAGE_SPECIAL 0x004 /* SW associated with special page */ -#define __HAVE_ARCH_PTE_SPECIAL - -/* Set of bits not changed in pte_modify */ -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_SPECIAL) - -/* Six different types of pages. */ -#define _PAGE_TYPE_EMPTY 0x400 -#define _PAGE_TYPE_NONE 0x401 -#define _PAGE_TYPE_SWAP 0x403 -#define _PAGE_TYPE_FILE 0x601 /* bit 0x002 is used for offset !! */ -#define _PAGE_TYPE_RO 0x200 -#define _PAGE_TYPE_RW 0x000 -#define _PAGE_TYPE_EX_RO 0x202 -#define _PAGE_TYPE_EX_RW 0x002 - -/* - * Only four types for huge pages, using the invalid bit and protection bit - * of a segment table entry. - */ -#define _HPAGE_TYPE_EMPTY 0x020 /* _SEGMENT_ENTRY_INV */ -#define _HPAGE_TYPE_NONE 0x220 -#define _HPAGE_TYPE_RO 0x200 /* _SEGMENT_ENTRY_RO */ -#define _HPAGE_TYPE_RW 0x000 - -/* - * PTE type bits are rather complicated. handle_pte_fault uses pte_present, - * pte_none and pte_file to find out the pte type WITHOUT holding the page - * table lock. ptep_clear_flush on the other hand uses ptep_clear_flush to - * invalidate a given pte. ipte sets the hw invalid bit and clears all tlbs - * for the page. The page table entry is set to _PAGE_TYPE_EMPTY afterwards. - * This change is done while holding the lock, but the intermediate step - * of a previously valid pte with the hw invalid bit set can be observed by - * handle_pte_fault. That makes it necessary that all valid pte types with - * the hw invalid bit set must be distinguishable from the four pte types - * empty, none, swap and file. - * - * irxt ipte irxt - * _PAGE_TYPE_EMPTY 1000 -> 1000 - * _PAGE_TYPE_NONE 1001 -> 1001 - * _PAGE_TYPE_SWAP 1011 -> 1011 - * _PAGE_TYPE_FILE 11?1 -> 11?1 - * _PAGE_TYPE_RO 0100 -> 1100 - * _PAGE_TYPE_RW 0000 -> 1000 - * _PAGE_TYPE_EX_RO 0110 -> 1110 - * _PAGE_TYPE_EX_RW 0010 -> 1010 - * - * pte_none is true for bits combinations 1000, 1010, 1100, 1110 - * pte_present is true for bits combinations 0000, 0010, 0100, 0110, 1001 - * pte_file is true for bits combinations 1101, 1111 - * swap pte is 1011 and 0001, 0011, 0101, 0111 are invalid. - */ - -/* Page status table bits for virtualization */ -#define RCP_PCL_BIT 55 -#define RCP_HR_BIT 54 -#define RCP_HC_BIT 53 -#define RCP_GR_BIT 50 -#define RCP_GC_BIT 49 - -#ifndef __s390x__ - -/* Bits in the segment table address-space-control-element */ -#define _ASCE_SPACE_SWITCH 0x80000000UL /* space switch event */ -#define _ASCE_ORIGIN_MASK 0x7ffff000UL /* segment table origin */ -#define _ASCE_PRIVATE_SPACE 0x100 /* private space control */ -#define _ASCE_ALT_EVENT 0x80 /* storage alteration event control */ -#define _ASCE_TABLE_LENGTH 0x7f /* 128 x 64 entries = 8k */ - -/* Bits in the segment table entry */ -#define _SEGMENT_ENTRY_ORIGIN 0x7fffffc0UL /* page table origin */ -#define _SEGMENT_ENTRY_INV 0x20 /* invalid segment table entry */ -#define _SEGMENT_ENTRY_COMMON 0x10 /* common segment bit */ -#define _SEGMENT_ENTRY_PTL 0x0f /* page table length */ - -#define _SEGMENT_ENTRY (_SEGMENT_ENTRY_PTL) -#define _SEGMENT_ENTRY_EMPTY (_SEGMENT_ENTRY_INV) - -#else /* __s390x__ */ - -/* Bits in the segment/region table address-space-control-element */ -#define _ASCE_ORIGIN ~0xfffUL/* segment table origin */ -#define _ASCE_PRIVATE_SPACE 0x100 /* private space control */ -#define _ASCE_ALT_EVENT 0x80 /* storage alteration event control */ -#define _ASCE_SPACE_SWITCH 0x40 /* space switch event */ -#define _ASCE_REAL_SPACE 0x20 /* real space control */ -#define _ASCE_TYPE_MASK 0x0c /* asce table type mask */ -#define _ASCE_TYPE_REGION1 0x0c /* region first table type */ -#define _ASCE_TYPE_REGION2 0x08 /* region second table type */ -#define _ASCE_TYPE_REGION3 0x04 /* region third table type */ -#define _ASCE_TYPE_SEGMENT 0x00 /* segment table type */ -#define _ASCE_TABLE_LENGTH 0x03 /* region table length */ - -/* Bits in the region table entry */ -#define _REGION_ENTRY_ORIGIN ~0xfffUL/* region/segment table origin */ -#define _REGION_ENTRY_INV 0x20 /* invalid region table entry */ -#define _REGION_ENTRY_TYPE_MASK 0x0c /* region/segment table type mask */ -#define _REGION_ENTRY_TYPE_R1 0x0c /* region first table type */ -#define _REGION_ENTRY_TYPE_R2 0x08 /* region second table type */ -#define _REGION_ENTRY_TYPE_R3 0x04 /* region third table type */ -#define _REGION_ENTRY_LENGTH 0x03 /* region third length */ - -#define _REGION1_ENTRY (_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_LENGTH) -#define _REGION1_ENTRY_EMPTY (_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_INV) -#define _REGION2_ENTRY (_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_LENGTH) -#define _REGION2_ENTRY_EMPTY (_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_INV) -#define _REGION3_ENTRY (_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_LENGTH) -#define _REGION3_ENTRY_EMPTY (_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_INV) - -/* Bits in the segment table entry */ -#define _SEGMENT_ENTRY_ORIGIN ~0x7ffUL/* segment table origin */ -#define _SEGMENT_ENTRY_RO 0x200 /* page protection bit */ -#define _SEGMENT_ENTRY_INV 0x20 /* invalid segment table entry */ - -#define _SEGMENT_ENTRY (0) -#define _SEGMENT_ENTRY_EMPTY (_SEGMENT_ENTRY_INV) - -#define _SEGMENT_ENTRY_LARGE 0x400 /* STE-format control, large page */ -#define _SEGMENT_ENTRY_CO 0x100 /* change-recording override */ - -#endif /* __s390x__ */ - -/* - * A user page table pointer has the space-switch-event bit, the - * private-space-control bit and the storage-alteration-event-control - * bit set. A kernel page table pointer doesn't need them. - */ -#define _ASCE_USER_BITS (_ASCE_SPACE_SWITCH | _ASCE_PRIVATE_SPACE | \ - _ASCE_ALT_EVENT) - -/* Bits int the storage key */ -#define _PAGE_CHANGED 0x02 /* HW changed bit */ -#define _PAGE_REFERENCED 0x04 /* HW referenced bit */ - -/* - * Page protection definitions. - */ -#define PAGE_NONE __pgprot(_PAGE_TYPE_NONE) -#define PAGE_RO __pgprot(_PAGE_TYPE_RO) -#define PAGE_RW __pgprot(_PAGE_TYPE_RW) -#define PAGE_EX_RO __pgprot(_PAGE_TYPE_EX_RO) -#define PAGE_EX_RW __pgprot(_PAGE_TYPE_EX_RW) - -#define PAGE_KERNEL PAGE_RW -#define PAGE_COPY PAGE_RO - -/* - * Dependent on the EXEC_PROTECT option s390 can do execute protection. - * Write permission always implies read permission. In theory with a - * primary/secondary page table execute only can be implemented but - * it would cost an additional bit in the pte to distinguish all the - * different pte types. To avoid that execute permission currently - * implies read permission as well. - */ - /*xwr*/ -#define __P000 PAGE_NONE -#define __P001 PAGE_RO -#define __P010 PAGE_RO -#define __P011 PAGE_RO -#define __P100 PAGE_EX_RO -#define __P101 PAGE_EX_RO -#define __P110 PAGE_EX_RO -#define __P111 PAGE_EX_RO - -#define __S000 PAGE_NONE -#define __S001 PAGE_RO -#define __S010 PAGE_RW -#define __S011 PAGE_RW -#define __S100 PAGE_EX_RO -#define __S101 PAGE_EX_RO -#define __S110 PAGE_EX_RW -#define __S111 PAGE_EX_RW - -#ifndef __s390x__ -# define PxD_SHADOW_SHIFT 1 -#else /* __s390x__ */ -# define PxD_SHADOW_SHIFT 2 -#endif /* __s390x__ */ - -static inline void *get_shadow_table(void *table) -{ - unsigned long addr, offset; - struct page *page; - - addr = (unsigned long) table; - offset = addr & ((PAGE_SIZE << PxD_SHADOW_SHIFT) - 1); - page = virt_to_page((void *)(addr ^ offset)); - return (void *)(addr_t)(page->index ? (page->index | offset) : 0UL); -} - -/* - * Certain architectures need to do special things when PTEs - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t entry) -{ - *ptep = entry; - if (mm->context.noexec) { - if (!(pte_val(entry) & _PAGE_INVALID) && - (pte_val(entry) & _PAGE_SWX)) - pte_val(entry) |= _PAGE_RO; - else - pte_val(entry) = _PAGE_TYPE_EMPTY; - ptep[PTRS_PER_PTE] = entry; - } -} - -/* - * pgd/pmd/pte query functions - */ -#ifndef __s390x__ - -static inline int pgd_present(pgd_t pgd) { return 1; } -static inline int pgd_none(pgd_t pgd) { return 0; } -static inline int pgd_bad(pgd_t pgd) { return 0; } - -static inline int pud_present(pud_t pud) { return 1; } -static inline int pud_none(pud_t pud) { return 0; } -static inline int pud_bad(pud_t pud) { return 0; } - -#else /* __s390x__ */ - -static inline int pgd_present(pgd_t pgd) -{ - if ((pgd_val(pgd) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R2) - return 1; - return (pgd_val(pgd) & _REGION_ENTRY_ORIGIN) != 0UL; -} - -static inline int pgd_none(pgd_t pgd) -{ - if ((pgd_val(pgd) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R2) - return 0; - return (pgd_val(pgd) & _REGION_ENTRY_INV) != 0UL; -} - -static inline int pgd_bad(pgd_t pgd) -{ - /* - * With dynamic page table levels the pgd can be a region table - * entry or a segment table entry. Check for the bit that are - * invalid for either table entry. - */ - unsigned long mask = - ~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INV & - ~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH; - return (pgd_val(pgd) & mask) != 0; -} - -static inline int pud_present(pud_t pud) -{ - if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R3) - return 1; - return (pud_val(pud) & _REGION_ENTRY_ORIGIN) != 0UL; -} - -static inline int pud_none(pud_t pud) -{ - if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R3) - return 0; - return (pud_val(pud) & _REGION_ENTRY_INV) != 0UL; -} - -static inline int pud_bad(pud_t pud) -{ - /* - * With dynamic page table levels the pud can be a region table - * entry or a segment table entry. Check for the bit that are - * invalid for either table entry. - */ - unsigned long mask = - ~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INV & - ~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH; - return (pud_val(pud) & mask) != 0; -} - -#endif /* __s390x__ */ - -static inline int pmd_present(pmd_t pmd) -{ - return (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) != 0UL; -} - -static inline int pmd_none(pmd_t pmd) -{ - return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) != 0UL; -} - -static inline int pmd_bad(pmd_t pmd) -{ - unsigned long mask = ~_SEGMENT_ENTRY_ORIGIN & ~_SEGMENT_ENTRY_INV; - return (pmd_val(pmd) & mask) != _SEGMENT_ENTRY; -} - -static inline int pte_none(pte_t pte) -{ - return (pte_val(pte) & _PAGE_INVALID) && !(pte_val(pte) & _PAGE_SWT); -} - -static inline int pte_present(pte_t pte) -{ - unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT | _PAGE_SWX; - return (pte_val(pte) & mask) == _PAGE_TYPE_NONE || - (!(pte_val(pte) & _PAGE_INVALID) && - !(pte_val(pte) & _PAGE_SWT)); -} - -static inline int pte_file(pte_t pte) -{ - unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT; - return (pte_val(pte) & mask) == _PAGE_TYPE_FILE; -} - -static inline int pte_special(pte_t pte) -{ - return (pte_val(pte) & _PAGE_SPECIAL); -} - -#define __HAVE_ARCH_PTE_SAME -#define pte_same(a,b) (pte_val(a) == pte_val(b)) - -static inline void rcp_lock(pte_t *ptep) -{ -#ifdef CONFIG_PGSTE - unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE); - preempt_disable(); - while (test_and_set_bit(RCP_PCL_BIT, pgste)) - ; -#endif -} - -static inline void rcp_unlock(pte_t *ptep) -{ -#ifdef CONFIG_PGSTE - unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE); - clear_bit(RCP_PCL_BIT, pgste); - preempt_enable(); -#endif -} - -/* forward declaration for SetPageUptodate in page-flags.h*/ -static inline void page_clear_dirty(struct page *page); -#include - -static inline void ptep_rcp_copy(pte_t *ptep) -{ -#ifdef CONFIG_PGSTE - struct page *page = virt_to_page(pte_val(*ptep)); - unsigned int skey; - unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE); - - skey = page_get_storage_key(page_to_phys(page)); - if (skey & _PAGE_CHANGED) - set_bit_simple(RCP_GC_BIT, pgste); - if (skey & _PAGE_REFERENCED) - set_bit_simple(RCP_GR_BIT, pgste); - if (test_and_clear_bit_simple(RCP_HC_BIT, pgste)) - SetPageDirty(page); - if (test_and_clear_bit_simple(RCP_HR_BIT, pgste)) - SetPageReferenced(page); -#endif -} - -/* - * query functions pte_write/pte_dirty/pte_young only work if - * pte_present() is true. Undefined behaviour if not.. - */ -static inline int pte_write(pte_t pte) -{ - return (pte_val(pte) & _PAGE_RO) == 0; -} - -static inline int pte_dirty(pte_t pte) -{ - /* A pte is neither clean nor dirty on s/390. The dirty bit - * is in the storage key. See page_test_and_clear_dirty for - * details. - */ - return 0; -} - -static inline int pte_young(pte_t pte) -{ - /* A pte is neither young nor old on s/390. The young bit - * is in the storage key. See page_test_and_clear_young for - * details. - */ - return 0; -} - -/* - * pgd/pmd/pte modification functions - */ - -#ifndef __s390x__ - -#define pgd_clear(pgd) do { } while (0) -#define pud_clear(pud) do { } while (0) - -#else /* __s390x__ */ - -static inline void pgd_clear_kernel(pgd_t * pgd) -{ - if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2) - pgd_val(*pgd) = _REGION2_ENTRY_EMPTY; -} - -static inline void pgd_clear(pgd_t * pgd) -{ - pgd_t *shadow = get_shadow_table(pgd); - - pgd_clear_kernel(pgd); - if (shadow) - pgd_clear_kernel(shadow); -} - -static inline void pud_clear_kernel(pud_t *pud) -{ - if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3) - pud_val(*pud) = _REGION3_ENTRY_EMPTY; -} - -static inline void pud_clear(pud_t *pud) -{ - pud_t *shadow = get_shadow_table(pud); - - pud_clear_kernel(pud); - if (shadow) - pud_clear_kernel(shadow); -} - -#endif /* __s390x__ */ - -static inline void pmd_clear_kernel(pmd_t * pmdp) -{ - pmd_val(*pmdp) = _SEGMENT_ENTRY_EMPTY; -} - -static inline void pmd_clear(pmd_t *pmd) -{ - pmd_t *shadow = get_shadow_table(pmd); - - pmd_clear_kernel(pmd); - if (shadow) - pmd_clear_kernel(shadow); -} - -static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - if (mm->context.pgstes) - ptep_rcp_copy(ptep); - pte_val(*ptep) = _PAGE_TYPE_EMPTY; - if (mm->context.noexec) - pte_val(ptep[PTRS_PER_PTE]) = _PAGE_TYPE_EMPTY; -} - -/* - * The following pte modification functions only work if - * pte_present() is true. Undefined behaviour if not.. - */ -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte_val(pte) &= _PAGE_CHG_MASK; - pte_val(pte) |= pgprot_val(newprot); - return pte; -} - -static inline pte_t pte_wrprotect(pte_t pte) -{ - /* Do not clobber _PAGE_TYPE_NONE pages! */ - if (!(pte_val(pte) & _PAGE_INVALID)) - pte_val(pte) |= _PAGE_RO; - return pte; -} - -static inline pte_t pte_mkwrite(pte_t pte) -{ - pte_val(pte) &= ~_PAGE_RO; - return pte; -} - -static inline pte_t pte_mkclean(pte_t pte) -{ - /* The only user of pte_mkclean is the fork() code. - We must *not* clear the *physical* page dirty bit - just because fork() wants to clear the dirty bit in - *one* of the page's mappings. So we just do nothing. */ - return pte; -} - -static inline pte_t pte_mkdirty(pte_t pte) -{ - /* We do not explicitly set the dirty bit because the - * sske instruction is slow. It is faster to let the - * next instruction set the dirty bit. - */ - return pte; -} - -static inline pte_t pte_mkold(pte_t pte) -{ - /* S/390 doesn't keep its dirty/referenced bit in the pte. - * There is no point in clearing the real referenced bit. - */ - return pte; -} - -static inline pte_t pte_mkyoung(pte_t pte) -{ - /* S/390 doesn't keep its dirty/referenced bit in the pte. - * There is no point in setting the real referenced bit. - */ - return pte; -} - -static inline pte_t pte_mkspecial(pte_t pte) -{ - pte_val(pte) |= _PAGE_SPECIAL; - return pte; -} - -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep) -{ -#ifdef CONFIG_PGSTE - unsigned long physpage; - int young; - unsigned long *pgste; - - if (!vma->vm_mm->context.pgstes) - return 0; - physpage = pte_val(*ptep) & PAGE_MASK; - pgste = (unsigned long *) (ptep + PTRS_PER_PTE); - - young = ((page_get_storage_key(physpage) & _PAGE_REFERENCED) != 0); - rcp_lock(ptep); - if (young) - set_bit_simple(RCP_GR_BIT, pgste); - young |= test_and_clear_bit_simple(RCP_HR_BIT, pgste); - rcp_unlock(ptep); - return young; -#endif - return 0; -} - -#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH -static inline int ptep_clear_flush_young(struct vm_area_struct *vma, - unsigned long address, pte_t *ptep) -{ - /* No need to flush TLB - * On s390 reference bits are in storage key and never in TLB - * With virtualization we handle the reference bit, without we - * we can simply return */ -#ifdef CONFIG_PGSTE - return ptep_test_and_clear_young(vma, address, ptep); -#endif - return 0; -} - -static inline void __ptep_ipte(unsigned long address, pte_t *ptep) -{ - if (!(pte_val(*ptep) & _PAGE_INVALID)) { -#ifndef __s390x__ - /* pto must point to the start of the segment table */ - pte_t *pto = (pte_t *) (((unsigned long) ptep) & 0x7ffffc00); -#else - /* ipte in zarch mode can do the math */ - pte_t *pto = ptep; -#endif - asm volatile( - " ipte %2,%3" - : "=m" (*ptep) : "m" (*ptep), - "a" (pto), "a" (address)); - } -} - -static inline void ptep_invalidate(struct mm_struct *mm, - unsigned long address, pte_t *ptep) -{ - if (mm->context.pgstes) { - rcp_lock(ptep); - __ptep_ipte(address, ptep); - ptep_rcp_copy(ptep); - pte_val(*ptep) = _PAGE_TYPE_EMPTY; - rcp_unlock(ptep); - return; - } - __ptep_ipte(address, ptep); - pte_val(*ptep) = _PAGE_TYPE_EMPTY; - if (mm->context.noexec) { - __ptep_ipte(address, ptep + PTRS_PER_PTE); - pte_val(*(ptep + PTRS_PER_PTE)) = _PAGE_TYPE_EMPTY; - } -} - -/* - * This is hard to understand. ptep_get_and_clear and ptep_clear_flush - * both clear the TLB for the unmapped pte. The reason is that - * ptep_get_and_clear is used in common code (e.g. change_pte_range) - * to modify an active pte. The sequence is - * 1) ptep_get_and_clear - * 2) set_pte_at - * 3) flush_tlb_range - * On s390 the tlb needs to get flushed with the modification of the pte - * if the pte is active. The only way how this can be implemented is to - * have ptep_get_and_clear do the tlb flush. In exchange flush_tlb_range - * is a nop. - */ -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -#define ptep_get_and_clear(__mm, __address, __ptep) \ -({ \ - pte_t __pte = *(__ptep); \ - if (atomic_read(&(__mm)->mm_users) > 1 || \ - (__mm) != current->active_mm) \ - ptep_invalidate(__mm, __address, __ptep); \ - else \ - pte_clear((__mm), (__address), (__ptep)); \ - __pte; \ -}) - -#define __HAVE_ARCH_PTEP_CLEAR_FLUSH -static inline pte_t ptep_clear_flush(struct vm_area_struct *vma, - unsigned long address, pte_t *ptep) -{ - pte_t pte = *ptep; - ptep_invalidate(vma->vm_mm, address, ptep); - return pte; -} - -/* - * The batched pte unmap code uses ptep_get_and_clear_full to clear the - * ptes. Here an optimization is possible. tlb_gather_mmu flushes all - * tlbs of an mm if it can guarantee that the ptes of the mm_struct - * cannot be accessed while the batched unmap is running. In this case - * full==1 and a simple pte_clear is enough. See tlb.h. - */ -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL -static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, - unsigned long addr, - pte_t *ptep, int full) -{ - pte_t pte = *ptep; - - if (full) - pte_clear(mm, addr, ptep); - else - ptep_invalidate(mm, addr, ptep); - return pte; -} - -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -#define ptep_set_wrprotect(__mm, __addr, __ptep) \ -({ \ - pte_t __pte = *(__ptep); \ - if (pte_write(__pte)) { \ - if (atomic_read(&(__mm)->mm_users) > 1 || \ - (__mm) != current->active_mm) \ - ptep_invalidate(__mm, __addr, __ptep); \ - set_pte_at(__mm, __addr, __ptep, pte_wrprotect(__pte)); \ - } \ -}) - -#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS -#define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \ -({ \ - int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ - ptep_invalidate((__vma)->vm_mm, __addr, __ptep); \ - set_pte_at((__vma)->vm_mm, __addr, __ptep, __entry); \ - } \ - __changed; \ -}) - -/* - * Test and clear dirty bit in storage key. - * We can't clear the changed bit atomically. This is a potential - * race against modification of the referenced bit. This function - * should therefore only be called if it is not mapped in any - * address space. - */ -#define __HAVE_ARCH_PAGE_TEST_DIRTY -static inline int page_test_dirty(struct page *page) -{ - return (page_get_storage_key(page_to_phys(page)) & _PAGE_CHANGED) != 0; -} - -#define __HAVE_ARCH_PAGE_CLEAR_DIRTY -static inline void page_clear_dirty(struct page *page) -{ - page_set_storage_key(page_to_phys(page), PAGE_DEFAULT_KEY); -} - -/* - * Test and clear referenced bit in storage key. - */ -#define __HAVE_ARCH_PAGE_TEST_AND_CLEAR_YOUNG -static inline int page_test_and_clear_young(struct page *page) -{ - unsigned long physpage = page_to_phys(page); - int ccode; - - asm volatile( - " rrbe 0,%1\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (ccode) : "a" (physpage) : "cc" ); - return ccode & 2; -} - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ -static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot) -{ - pte_t __pte; - pte_val(__pte) = physpage + pgprot_val(pgprot); - return __pte; -} - -static inline pte_t mk_pte(struct page *page, pgprot_t pgprot) -{ - unsigned long physpage = page_to_phys(page); - - return mk_pte_phys(physpage, pgprot); -} - -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) -#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) -#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) -#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE-1)) - -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -#ifndef __s390x__ - -#define pmd_deref(pmd) (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) -#define pud_deref(pmd) ({ BUG(); 0UL; }) -#define pgd_deref(pmd) ({ BUG(); 0UL; }) - -#define pud_offset(pgd, address) ((pud_t *) pgd) -#define pmd_offset(pud, address) ((pmd_t *) pud + pmd_index(address)) - -#else /* __s390x__ */ - -#define pmd_deref(pmd) (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) -#define pud_deref(pud) (pud_val(pud) & _REGION_ENTRY_ORIGIN) -#define pgd_deref(pgd) (pgd_val(pgd) & _REGION_ENTRY_ORIGIN) - -static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address) -{ - pud_t *pud = (pud_t *) pgd; - if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2) - pud = (pud_t *) pgd_deref(*pgd); - return pud + pud_index(address); -} - -static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) -{ - pmd_t *pmd = (pmd_t *) pud; - if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3) - pmd = (pmd_t *) pud_deref(*pud); - return pmd + pmd_index(address); -} - -#endif /* __s390x__ */ - -#define pfn_pte(pfn,pgprot) mk_pte_phys(__pa((pfn) << PAGE_SHIFT),(pgprot)) -#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT) -#define pte_page(x) pfn_to_page(pte_pfn(x)) - -#define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT) - -/* Find an entry in the lowest level page table.. */ -#define pte_offset(pmd, addr) ((pte_t *) pmd_deref(*(pmd)) + pte_index(addr)) -#define pte_offset_kernel(pmd, address) pte_offset(pmd,address) -#define pte_offset_map(pmd, address) pte_offset_kernel(pmd, address) -#define pte_offset_map_nested(pmd, address) pte_offset_kernel(pmd, address) -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) - -/* - * 31 bit swap entry format: - * A page-table entry has some bits we have to treat in a special way. - * Bits 0, 20 and bit 23 have to be zero, otherwise an specification - * exception will occur instead of a page translation exception. The - * specifiation exception has the bad habit not to store necessary - * information in the lowcore. - * Bit 21 and bit 22 are the page invalid bit and the page protection - * bit. We set both to indicate a swapped page. - * Bit 30 and 31 are used to distinguish the different page types. For - * a swapped page these bits need to be zero. - * This leaves the bits 1-19 and bits 24-29 to store type and offset. - * We use the 5 bits from 25-29 for the type and the 20 bits from 1-19 - * plus 24 for the offset. - * 0| offset |0110|o|type |00| - * 0 0000000001111111111 2222 2 22222 33 - * 0 1234567890123456789 0123 4 56789 01 - * - * 64 bit swap entry format: - * A page-table entry has some bits we have to treat in a special way. - * Bits 52 and bit 55 have to be zero, otherwise an specification - * exception will occur instead of a page translation exception. The - * specifiation exception has the bad habit not to store necessary - * information in the lowcore. - * Bit 53 and bit 54 are the page invalid bit and the page protection - * bit. We set both to indicate a swapped page. - * Bit 62 and 63 are used to distinguish the different page types. For - * a swapped page these bits need to be zero. - * This leaves the bits 0-51 and bits 56-61 to store type and offset. - * We use the 5 bits from 57-61 for the type and the 53 bits from 0-51 - * plus 56 for the offset. - * | offset |0110|o|type |00| - * 0000000000111111111122222222223333333333444444444455 5555 5 55566 66 - * 0123456789012345678901234567890123456789012345678901 2345 6 78901 23 - */ -#ifndef __s390x__ -#define __SWP_OFFSET_MASK (~0UL >> 12) -#else -#define __SWP_OFFSET_MASK (~0UL >> 11) -#endif -static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset) -{ - pte_t pte; - offset &= __SWP_OFFSET_MASK; - pte_val(pte) = _PAGE_TYPE_SWAP | ((type & 0x1f) << 2) | - ((offset & 1UL) << 7) | ((offset & ~1UL) << 11); - return pte; -} - -#define __swp_type(entry) (((entry).val >> 2) & 0x1f) -#define __swp_offset(entry) (((entry).val >> 11) | (((entry).val >> 7) & 1)) -#define __swp_entry(type,offset) ((swp_entry_t) { pte_val(mk_swap_pte((type),(offset))) }) - -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -#ifndef __s390x__ -# define PTE_FILE_MAX_BITS 26 -#else /* __s390x__ */ -# define PTE_FILE_MAX_BITS 59 -#endif /* __s390x__ */ - -#define pte_to_pgoff(__pte) \ - ((((__pte).pte >> 12) << 7) + (((__pte).pte >> 1) & 0x7f)) - -#define pgoff_to_pte(__off) \ - ((pte_t) { ((((__off) & 0x7f) << 1) + (((__off) >> 7) << 12)) \ - | _PAGE_TYPE_FILE }) - -#endif /* !__ASSEMBLY__ */ - -#define kern_addr_valid(addr) (1) - -extern int vmem_add_mapping(unsigned long start, unsigned long size); -extern int vmem_remove_mapping(unsigned long start, unsigned long size); -extern int s390_enable_sie(void); - -/* - * No page table caches to initialise - */ -#define pgtable_cache_init() do { } while (0) - -#include - -#endif /* _S390_PAGE_H */ diff --git a/include/asm-s390/poll.h b/include/asm-s390/poll.h deleted file mode 100644 index c98509d3149e..000000000000 --- a/include/asm-s390/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-s390/posix_types.h b/include/asm-s390/posix_types.h deleted file mode 100644 index 397d93fba3a7..000000000000 --- a/include/asm-s390/posix_types.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * include/asm-s390/posix_types.h - * - * S390 version - * - * Derived from "include/asm-i386/posix_types.h" - */ - -#ifndef __ARCH_S390_POSIX_TYPES_H -#define __ARCH_S390_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned long __kernel_size_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -#ifndef __s390x__ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#else /* __s390x__ */ - -typedef unsigned int __kernel_ino_t; -typedef unsigned int __kernel_mode_t; -typedef unsigned int __kernel_nlink_t; -typedef int __kernel_ipc_pid_t; -typedef unsigned int __kernel_uid_t; -typedef unsigned int __kernel_gid_t; -typedef long __kernel_ssize_t; -typedef long __kernel_ptrdiff_t; -typedef unsigned long __kernel_sigset_t; /* at least 32 bits */ -typedef __kernel_uid_t __kernel_old_uid_t; -typedef __kernel_gid_t __kernel_old_gid_t; -typedef __kernel_uid_t __kernel_uid32_t; -typedef __kernel_gid_t __kernel_gid32_t; -typedef unsigned short __kernel_old_dev_t; - -#endif /* __s390x__ */ - -typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) - int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL)*/ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL)*/ -} __kernel_fsid_t; - - -#ifdef __KERNEL__ - -#undef __FD_SET -static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - fdsetp->fds_bits[_tmp] |= (1UL<<_rem); -} - -#undef __FD_CLR -static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); -} - -#undef __FD_ISSET -static inline int __FD_ISSET(unsigned long fd, const __kernel_fd_set *fdsetp) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - return (fdsetp->fds_bits[_tmp] & (1UL<<_rem)) != 0; -} - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) \ - ((void) memset ((void *) (fdsetp), 0, sizeof (__kernel_fd_set))) - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-s390/processor.h b/include/asm-s390/processor.h deleted file mode 100644 index 4af80af2a88f..000000000000 --- a/include/asm-s390/processor.h +++ /dev/null @@ -1,360 +0,0 @@ -/* - * include/asm-s390/processor.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com) - * - * Derived from "include/asm-i386/processor.h" - * Copyright (C) 1994, Linus Torvalds - */ - -#ifndef __ASM_S390_PROCESSOR_H -#define __ASM_S390_PROCESSOR_H - -#include - -#ifdef __KERNEL__ -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; }) - -/* - * CPU type and hardware bug flags. Kept separately for each CPU. - * Members of this structure are referenced in head.S, so think twice - * before touching them. [mj] - */ - -typedef struct -{ - unsigned int version : 8; - unsigned int ident : 24; - unsigned int machine : 16; - unsigned int unused : 16; -} __attribute__ ((packed)) cpuid_t; - -static inline void get_cpu_id(cpuid_t *ptr) -{ - asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr)); -} - -struct cpuinfo_S390 -{ - cpuid_t cpu_id; - __u16 cpu_addr; - __u16 cpu_nr; - unsigned long loops_per_jiffy; - unsigned long *pgd_quick; -#ifdef __s390x__ - unsigned long *pmd_quick; -#endif /* __s390x__ */ - unsigned long *pte_quick; - unsigned long pgtable_cache_sz; -}; - -extern void s390_adjust_jiffies(void); -extern void print_cpu_info(struct cpuinfo_S390 *); -extern int get_cpu_capability(unsigned int *); - -/* - * User space process size: 2GB for 31 bit, 4TB for 64 bit. - */ -#ifndef __s390x__ - -#define TASK_SIZE (1UL << 31) -#define TASK_UNMAPPED_BASE (1UL << 30) - -#else /* __s390x__ */ - -#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk,TIF_31BIT) ? \ - (1UL << 31) : (1UL << 53)) -#define TASK_UNMAPPED_BASE (test_thread_flag(TIF_31BIT) ? \ - (1UL << 30) : (1UL << 41)) -#define TASK_SIZE TASK_SIZE_OF(current) - -#endif /* __s390x__ */ - -#ifdef __KERNEL__ - -#ifndef __s390x__ -#define STACK_TOP (1UL << 31) -#define STACK_TOP_MAX (1UL << 31) -#else /* __s390x__ */ -#define STACK_TOP (1UL << (test_thread_flag(TIF_31BIT) ? 31:42)) -#define STACK_TOP_MAX (1UL << 42) -#endif /* __s390x__ */ - - -#endif - -#define HAVE_ARCH_PICK_MMAP_LAYOUT - -typedef struct { - __u32 ar4; -} mm_segment_t; - -/* - * Thread structure - */ -struct thread_struct { - s390_fp_regs fp_regs; - unsigned int acrs[NUM_ACRS]; - unsigned long ksp; /* kernel stack pointer */ - mm_segment_t mm_segment; - unsigned long prot_addr; /* address of protection-excep. */ - unsigned int trap_no; - per_struct per_info; - /* Used to give failing instruction back to user for ieee exceptions */ - unsigned long ieee_instruction_pointer; - /* pfault_wait is used to block the process on a pfault event */ - unsigned long pfault_wait; -}; - -typedef struct thread_struct thread_struct; - -/* - * Stack layout of a C stack frame. - */ -#ifndef __PACK_STACK -struct stack_frame { - unsigned long back_chain; - unsigned long empty1[5]; - unsigned long gprs[10]; - unsigned int empty2[8]; -}; -#else -struct stack_frame { - unsigned long empty1[5]; - unsigned int empty2[8]; - unsigned long gprs[10]; - unsigned long back_chain; -}; -#endif - -#define ARCH_MIN_TASKALIGN 8 - -#define INIT_THREAD { \ - .ksp = sizeof(init_stack) + (unsigned long) &init_stack, \ -} - -/* - * Do necessary setup to start up a new thread. - */ -#define start_thread(regs, new_psw, new_stackp) do { \ - set_fs(USER_DS); \ - regs->psw.mask = psw_user_bits; \ - regs->psw.addr = new_psw | PSW_ADDR_AMODE; \ - regs->gprs[15] = new_stackp; \ -} while (0) - -#define start_thread31(regs, new_psw, new_stackp) do { \ - set_fs(USER_DS); \ - regs->psw.mask = psw_user32_bits; \ - regs->psw.addr = new_psw | PSW_ADDR_AMODE; \ - regs->gprs[15] = new_stackp; \ - crst_table_downgrade(current->mm, 1UL << 31); \ -} while (0) - -/* Forward declaration, a strange C thing */ -struct task_struct; -struct mm_struct; -struct seq_file; - -/* Free all resources held by a thread. */ -extern void release_thread(struct task_struct *); -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -/* - * Return saved PC of a blocked thread. - */ -extern unsigned long thread_saved_pc(struct task_struct *t); - -/* - * Print register of task into buffer. Used in fs/proc/array.c. - */ -extern void task_show_regs(struct seq_file *m, struct task_struct *task); - -extern void show_code(struct pt_regs *regs); - -unsigned long get_wchan(struct task_struct *p); -#define task_pt_regs(tsk) ((struct pt_regs *) \ - (task_stack_page(tsk) + THREAD_SIZE) - 1) -#define KSTK_EIP(tsk) (task_pt_regs(tsk)->psw.addr) -#define KSTK_ESP(tsk) (task_pt_regs(tsk)->gprs[15]) - -/* - * Give up the time slice of the virtual PU. - */ -static inline void cpu_relax(void) -{ - if (MACHINE_HAS_DIAG44) - asm volatile("diag 0,0,68"); - barrier(); -} - -static inline void psw_set_key(unsigned int key) -{ - asm volatile("spka 0(%0)" : : "d" (key)); -} - -/* - * Set PSW to specified value. - */ -static inline void __load_psw(psw_t psw) -{ -#ifndef __s390x__ - asm volatile("lpsw 0(%0)" : : "a" (&psw), "m" (psw) : "cc"); -#else - asm volatile("lpswe 0(%0)" : : "a" (&psw), "m" (psw) : "cc"); -#endif -} - -/* - * Set PSW mask to specified value, while leaving the - * PSW addr pointing to the next instruction. - */ - -static inline void __load_psw_mask (unsigned long mask) -{ - unsigned long addr; - psw_t psw; - - psw.mask = mask; - -#ifndef __s390x__ - asm volatile( - " basr %0,0\n" - "0: ahi %0,1f-0b\n" - " st %0,4(%1)\n" - " lpsw 0(%1)\n" - "1:" - : "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc"); -#else /* __s390x__ */ - asm volatile( - " larl %0,1f\n" - " stg %0,8(%1)\n" - " lpswe 0(%1)\n" - "1:" - : "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc"); -#endif /* __s390x__ */ -} - -/* - * Function to stop a processor until an interruption occurred - */ -static inline void enabled_wait(void) -{ - __load_psw_mask(PSW_BASE_BITS | PSW_MASK_IO | PSW_MASK_EXT | - PSW_MASK_MCHECK | PSW_MASK_WAIT | PSW_DEFAULT_KEY); -} - -/* - * Function to drop a processor into disabled wait state - */ - -static inline void disabled_wait(unsigned long code) -{ - unsigned long ctl_buf; - psw_t dw_psw; - - dw_psw.mask = PSW_BASE_BITS | PSW_MASK_WAIT; - dw_psw.addr = code; - /* - * Store status and then load disabled wait psw, - * the processor is dead afterwards - */ -#ifndef __s390x__ - asm volatile( - " stctl 0,0,0(%2)\n" - " ni 0(%2),0xef\n" /* switch off protection */ - " lctl 0,0,0(%2)\n" - " stpt 0xd8\n" /* store timer */ - " stckc 0xe0\n" /* store clock comparator */ - " stpx 0x108\n" /* store prefix register */ - " stam 0,15,0x120\n" /* store access registers */ - " std 0,0x160\n" /* store f0 */ - " std 2,0x168\n" /* store f2 */ - " std 4,0x170\n" /* store f4 */ - " std 6,0x178\n" /* store f6 */ - " stm 0,15,0x180\n" /* store general registers */ - " stctl 0,15,0x1c0\n" /* store control registers */ - " oi 0x1c0,0x10\n" /* fake protection bit */ - " lpsw 0(%1)" - : "=m" (ctl_buf) - : "a" (&dw_psw), "a" (&ctl_buf), "m" (dw_psw) : "cc"); -#else /* __s390x__ */ - asm volatile( - " stctg 0,0,0(%2)\n" - " ni 4(%2),0xef\n" /* switch off protection */ - " lctlg 0,0,0(%2)\n" - " lghi 1,0x1000\n" - " stpt 0x328(1)\n" /* store timer */ - " stckc 0x330(1)\n" /* store clock comparator */ - " stpx 0x318(1)\n" /* store prefix register */ - " stam 0,15,0x340(1)\n"/* store access registers */ - " stfpc 0x31c(1)\n" /* store fpu control */ - " std 0,0x200(1)\n" /* store f0 */ - " std 1,0x208(1)\n" /* store f1 */ - " std 2,0x210(1)\n" /* store f2 */ - " std 3,0x218(1)\n" /* store f3 */ - " std 4,0x220(1)\n" /* store f4 */ - " std 5,0x228(1)\n" /* store f5 */ - " std 6,0x230(1)\n" /* store f6 */ - " std 7,0x238(1)\n" /* store f7 */ - " std 8,0x240(1)\n" /* store f8 */ - " std 9,0x248(1)\n" /* store f9 */ - " std 10,0x250(1)\n" /* store f10 */ - " std 11,0x258(1)\n" /* store f11 */ - " std 12,0x260(1)\n" /* store f12 */ - " std 13,0x268(1)\n" /* store f13 */ - " std 14,0x270(1)\n" /* store f14 */ - " std 15,0x278(1)\n" /* store f15 */ - " stmg 0,15,0x280(1)\n"/* store general registers */ - " stctg 0,15,0x380(1)\n"/* store control registers */ - " oi 0x384(1),0x10\n"/* fake protection bit */ - " lpswe 0(%1)" - : "=m" (ctl_buf) - : "a" (&dw_psw), "a" (&ctl_buf), "m" (dw_psw) : "cc", "0"); -#endif /* __s390x__ */ -} - -/* - * Basic Machine Check/Program Check Handler. - */ - -extern void s390_base_mcck_handler(void); -extern void s390_base_pgm_handler(void); -extern void s390_base_ext_handler(void); - -extern void (*s390_base_mcck_handler_fn)(void); -extern void (*s390_base_pgm_handler_fn)(void); -extern void (*s390_base_ext_handler_fn)(void); - -#define ARCH_LOW_ADDRESS_LIMIT 0x7fffffffUL - -#endif - -/* - * Helper macro for exception table entries - */ -#ifndef __s390x__ -#define EX_TABLE(_fault,_target) \ - ".section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long " #_fault "," #_target "\n" \ - ".previous\n" -#else -#define EX_TABLE(_fault,_target) \ - ".section __ex_table,\"a\"\n" \ - " .align 8\n" \ - " .quad " #_fault "," #_target "\n" \ - ".previous\n" -#endif - -#endif /* __ASM_S390_PROCESSOR_H */ diff --git a/include/asm-s390/ptrace.h b/include/asm-s390/ptrace.h deleted file mode 100644 index af2c9ac28a07..000000000000 --- a/include/asm-s390/ptrace.h +++ /dev/null @@ -1,499 +0,0 @@ -/* - * include/asm-s390/ptrace.h - * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) - */ - -#ifndef _S390_PTRACE_H -#define _S390_PTRACE_H - -/* - * Offsets in the user_regs_struct. They are used for the ptrace - * system call and in entry.S - */ -#ifndef __s390x__ - -#define PT_PSWMASK 0x00 -#define PT_PSWADDR 0x04 -#define PT_GPR0 0x08 -#define PT_GPR1 0x0C -#define PT_GPR2 0x10 -#define PT_GPR3 0x14 -#define PT_GPR4 0x18 -#define PT_GPR5 0x1C -#define PT_GPR6 0x20 -#define PT_GPR7 0x24 -#define PT_GPR8 0x28 -#define PT_GPR9 0x2C -#define PT_GPR10 0x30 -#define PT_GPR11 0x34 -#define PT_GPR12 0x38 -#define PT_GPR13 0x3C -#define PT_GPR14 0x40 -#define PT_GPR15 0x44 -#define PT_ACR0 0x48 -#define PT_ACR1 0x4C -#define PT_ACR2 0x50 -#define PT_ACR3 0x54 -#define PT_ACR4 0x58 -#define PT_ACR5 0x5C -#define PT_ACR6 0x60 -#define PT_ACR7 0x64 -#define PT_ACR8 0x68 -#define PT_ACR9 0x6C -#define PT_ACR10 0x70 -#define PT_ACR11 0x74 -#define PT_ACR12 0x78 -#define PT_ACR13 0x7C -#define PT_ACR14 0x80 -#define PT_ACR15 0x84 -#define PT_ORIGGPR2 0x88 -#define PT_FPC 0x90 -/* - * A nasty fact of life that the ptrace api - * only supports passing of longs. - */ -#define PT_FPR0_HI 0x98 -#define PT_FPR0_LO 0x9C -#define PT_FPR1_HI 0xA0 -#define PT_FPR1_LO 0xA4 -#define PT_FPR2_HI 0xA8 -#define PT_FPR2_LO 0xAC -#define PT_FPR3_HI 0xB0 -#define PT_FPR3_LO 0xB4 -#define PT_FPR4_HI 0xB8 -#define PT_FPR4_LO 0xBC -#define PT_FPR5_HI 0xC0 -#define PT_FPR5_LO 0xC4 -#define PT_FPR6_HI 0xC8 -#define PT_FPR6_LO 0xCC -#define PT_FPR7_HI 0xD0 -#define PT_FPR7_LO 0xD4 -#define PT_FPR8_HI 0xD8 -#define PT_FPR8_LO 0XDC -#define PT_FPR9_HI 0xE0 -#define PT_FPR9_LO 0xE4 -#define PT_FPR10_HI 0xE8 -#define PT_FPR10_LO 0xEC -#define PT_FPR11_HI 0xF0 -#define PT_FPR11_LO 0xF4 -#define PT_FPR12_HI 0xF8 -#define PT_FPR12_LO 0xFC -#define PT_FPR13_HI 0x100 -#define PT_FPR13_LO 0x104 -#define PT_FPR14_HI 0x108 -#define PT_FPR14_LO 0x10C -#define PT_FPR15_HI 0x110 -#define PT_FPR15_LO 0x114 -#define PT_CR_9 0x118 -#define PT_CR_10 0x11C -#define PT_CR_11 0x120 -#define PT_IEEE_IP 0x13C -#define PT_LASTOFF PT_IEEE_IP -#define PT_ENDREGS 0x140-1 - -#define GPR_SIZE 4 -#define CR_SIZE 4 - -#define STACK_FRAME_OVERHEAD 96 /* size of minimum stack frame */ - -#else /* __s390x__ */ - -#define PT_PSWMASK 0x00 -#define PT_PSWADDR 0x08 -#define PT_GPR0 0x10 -#define PT_GPR1 0x18 -#define PT_GPR2 0x20 -#define PT_GPR3 0x28 -#define PT_GPR4 0x30 -#define PT_GPR5 0x38 -#define PT_GPR6 0x40 -#define PT_GPR7 0x48 -#define PT_GPR8 0x50 -#define PT_GPR9 0x58 -#define PT_GPR10 0x60 -#define PT_GPR11 0x68 -#define PT_GPR12 0x70 -#define PT_GPR13 0x78 -#define PT_GPR14 0x80 -#define PT_GPR15 0x88 -#define PT_ACR0 0x90 -#define PT_ACR1 0x94 -#define PT_ACR2 0x98 -#define PT_ACR3 0x9C -#define PT_ACR4 0xA0 -#define PT_ACR5 0xA4 -#define PT_ACR6 0xA8 -#define PT_ACR7 0xAC -#define PT_ACR8 0xB0 -#define PT_ACR9 0xB4 -#define PT_ACR10 0xB8 -#define PT_ACR11 0xBC -#define PT_ACR12 0xC0 -#define PT_ACR13 0xC4 -#define PT_ACR14 0xC8 -#define PT_ACR15 0xCC -#define PT_ORIGGPR2 0xD0 -#define PT_FPC 0xD8 -#define PT_FPR0 0xE0 -#define PT_FPR1 0xE8 -#define PT_FPR2 0xF0 -#define PT_FPR3 0xF8 -#define PT_FPR4 0x100 -#define PT_FPR5 0x108 -#define PT_FPR6 0x110 -#define PT_FPR7 0x118 -#define PT_FPR8 0x120 -#define PT_FPR9 0x128 -#define PT_FPR10 0x130 -#define PT_FPR11 0x138 -#define PT_FPR12 0x140 -#define PT_FPR13 0x148 -#define PT_FPR14 0x150 -#define PT_FPR15 0x158 -#define PT_CR_9 0x160 -#define PT_CR_10 0x168 -#define PT_CR_11 0x170 -#define PT_IEEE_IP 0x1A8 -#define PT_LASTOFF PT_IEEE_IP -#define PT_ENDREGS 0x1B0-1 - -#define GPR_SIZE 8 -#define CR_SIZE 8 - -#define STACK_FRAME_OVERHEAD 160 /* size of minimum stack frame */ - -#endif /* __s390x__ */ - -#define NUM_GPRS 16 -#define NUM_FPRS 16 -#define NUM_CRS 16 -#define NUM_ACRS 16 - -#define FPR_SIZE 8 -#define FPC_SIZE 4 -#define FPC_PAD_SIZE 4 /* gcc insists on aligning the fpregs */ -#define ACR_SIZE 4 - - -#define PTRACE_OLDSETOPTIONS 21 - -#ifndef __ASSEMBLY__ -#include -#include - -typedef union -{ - float f; - double d; - __u64 ui; - struct - { - __u32 hi; - __u32 lo; - } fp; -} freg_t; - -typedef struct -{ - __u32 fpc; - freg_t fprs[NUM_FPRS]; -} s390_fp_regs; - -#define FPC_EXCEPTION_MASK 0xF8000000 -#define FPC_FLAGS_MASK 0x00F80000 -#define FPC_DXC_MASK 0x0000FF00 -#define FPC_RM_MASK 0x00000003 -#define FPC_VALID_MASK 0xF8F8FF03 - -/* this typedef defines how a Program Status Word looks like */ -typedef struct -{ - unsigned long mask; - unsigned long addr; -} __attribute__ ((aligned(8))) psw_t; - -typedef struct -{ - __u32 mask; - __u32 addr; -} __attribute__ ((aligned(8))) psw_compat_t; - -#ifndef __s390x__ - -#define PSW_MASK_PER 0x40000000UL -#define PSW_MASK_DAT 0x04000000UL -#define PSW_MASK_IO 0x02000000UL -#define PSW_MASK_EXT 0x01000000UL -#define PSW_MASK_KEY 0x00F00000UL -#define PSW_MASK_MCHECK 0x00040000UL -#define PSW_MASK_WAIT 0x00020000UL -#define PSW_MASK_PSTATE 0x00010000UL -#define PSW_MASK_ASC 0x0000C000UL -#define PSW_MASK_CC 0x00003000UL -#define PSW_MASK_PM 0x00000F00UL - -#define PSW_ADDR_AMODE 0x80000000UL -#define PSW_ADDR_INSN 0x7FFFFFFFUL - -#define PSW_BASE_BITS 0x00080000UL -#define PSW_DEFAULT_KEY (((unsigned long) PAGE_DEFAULT_ACC) << 20) - -#define PSW_ASC_PRIMARY 0x00000000UL -#define PSW_ASC_ACCREG 0x00004000UL -#define PSW_ASC_SECONDARY 0x00008000UL -#define PSW_ASC_HOME 0x0000C000UL - -#else /* __s390x__ */ - -#define PSW_MASK_PER 0x4000000000000000UL -#define PSW_MASK_DAT 0x0400000000000000UL -#define PSW_MASK_IO 0x0200000000000000UL -#define PSW_MASK_EXT 0x0100000000000000UL -#define PSW_MASK_KEY 0x00F0000000000000UL -#define PSW_MASK_MCHECK 0x0004000000000000UL -#define PSW_MASK_WAIT 0x0002000000000000UL -#define PSW_MASK_PSTATE 0x0001000000000000UL -#define PSW_MASK_ASC 0x0000C00000000000UL -#define PSW_MASK_CC 0x0000300000000000UL -#define PSW_MASK_PM 0x00000F0000000000UL - -#define PSW_ADDR_AMODE 0x0000000000000000UL -#define PSW_ADDR_INSN 0xFFFFFFFFFFFFFFFFUL - -#define PSW_BASE_BITS 0x0000000180000000UL -#define PSW_BASE32_BITS 0x0000000080000000UL -#define PSW_DEFAULT_KEY (((unsigned long) PAGE_DEFAULT_ACC) << 52) - -#define PSW_ASC_PRIMARY 0x0000000000000000UL -#define PSW_ASC_ACCREG 0x0000400000000000UL -#define PSW_ASC_SECONDARY 0x0000800000000000UL -#define PSW_ASC_HOME 0x0000C00000000000UL - -extern long psw_user32_bits; - -#endif /* __s390x__ */ - -extern long psw_kernel_bits; -extern long psw_user_bits; - -/* This macro merges a NEW PSW mask specified by the user into - the currently active PSW mask CURRENT, modifying only those - bits in CURRENT that the user may be allowed to change: this - is the condition code and the program mask bits. */ -#define PSW_MASK_MERGE(CURRENT,NEW) \ - (((CURRENT) & ~(PSW_MASK_CC|PSW_MASK_PM)) | \ - ((NEW) & (PSW_MASK_CC|PSW_MASK_PM))) - -/* - * The s390_regs structure is used to define the elf_gregset_t. - */ -typedef struct -{ - psw_t psw; - unsigned long gprs[NUM_GPRS]; - unsigned int acrs[NUM_ACRS]; - unsigned long orig_gpr2; -} s390_regs; - -typedef struct -{ - psw_compat_t psw; - __u32 gprs[NUM_GPRS]; - __u32 acrs[NUM_ACRS]; - __u32 orig_gpr2; -} s390_compat_regs; - - -#ifdef __KERNEL__ -#include -#include - -/* - * The pt_regs struct defines the way the registers are stored on - * the stack during a system call. - */ -struct pt_regs -{ - unsigned long args[1]; - psw_t psw; - unsigned long gprs[NUM_GPRS]; - unsigned long orig_gpr2; - unsigned short ilc; - unsigned short trap; -}; -#endif - -/* - * Now for the program event recording (trace) definitions. - */ -typedef struct -{ - unsigned long cr[3]; -} per_cr_words; - -#define PER_EM_MASK 0xE8000000UL - -typedef struct -{ -#ifdef __s390x__ - unsigned : 32; -#endif /* __s390x__ */ - unsigned em_branching : 1; - unsigned em_instruction_fetch : 1; - /* - * Switching on storage alteration automatically fixes - * the storage alteration event bit in the users std. - */ - unsigned em_storage_alteration : 1; - unsigned em_gpr_alt_unused : 1; - unsigned em_store_real_address : 1; - unsigned : 3; - unsigned branch_addr_ctl : 1; - unsigned : 1; - unsigned storage_alt_space_ctl : 1; - unsigned : 21; - unsigned long starting_addr; - unsigned long ending_addr; -} per_cr_bits; - -typedef struct -{ - unsigned short perc_atmid; - unsigned long address; - unsigned char access_id; -} per_lowcore_words; - -typedef struct -{ - unsigned perc_branching : 1; - unsigned perc_instruction_fetch : 1; - unsigned perc_storage_alteration : 1; - unsigned perc_gpr_alt_unused : 1; - unsigned perc_store_real_address : 1; - unsigned : 3; - unsigned atmid_psw_bit_31 : 1; - unsigned atmid_validity_bit : 1; - unsigned atmid_psw_bit_32 : 1; - unsigned atmid_psw_bit_5 : 1; - unsigned atmid_psw_bit_16 : 1; - unsigned atmid_psw_bit_17 : 1; - unsigned si : 2; - unsigned long address; - unsigned : 4; - unsigned access_id : 4; -} per_lowcore_bits; - -typedef struct -{ - union { - per_cr_words words; - per_cr_bits bits; - } control_regs; - /* - * Use these flags instead of setting em_instruction_fetch - * directly they are used so that single stepping can be - * switched on & off while not affecting other tracing - */ - unsigned single_step : 1; - unsigned instruction_fetch : 1; - unsigned : 30; - /* - * These addresses are copied into cr10 & cr11 if single - * stepping is switched off - */ - unsigned long starting_addr; - unsigned long ending_addr; - union { - per_lowcore_words words; - per_lowcore_bits bits; - } lowcore; -} per_struct; - -typedef struct -{ - unsigned int len; - unsigned long kernel_addr; - unsigned long process_addr; -} ptrace_area; - -/* - * S/390 specific non posix ptrace requests. I chose unusual values so - * they are unlikely to clash with future ptrace definitions. - */ -#define PTRACE_PEEKUSR_AREA 0x5000 -#define PTRACE_POKEUSR_AREA 0x5001 -#define PTRACE_PEEKTEXT_AREA 0x5002 -#define PTRACE_PEEKDATA_AREA 0x5003 -#define PTRACE_POKETEXT_AREA 0x5004 -#define PTRACE_POKEDATA_AREA 0x5005 - -/* - * PT_PROT definition is loosely based on hppa bsd definition in - * gdb/hppab-nat.c - */ -#define PTRACE_PROT 21 - -typedef enum -{ - ptprot_set_access_watchpoint, - ptprot_set_write_watchpoint, - ptprot_disable_watchpoint -} ptprot_flags; - -typedef struct -{ - unsigned long lowaddr; - unsigned long hiaddr; - ptprot_flags prot; -} ptprot_area; - -/* Sequence of bytes for breakpoint illegal instruction. */ -#define S390_BREAKPOINT {0x0,0x1} -#define S390_BREAKPOINT_U16 ((__u16)0x0001) -#define S390_SYSCALL_OPCODE ((__u16)0x0a00) -#define S390_SYSCALL_SIZE 2 - -/* - * The user_regs_struct defines the way the user registers are - * store on the stack for signal handling. - */ -struct user_regs_struct -{ - psw_t psw; - unsigned long gprs[NUM_GPRS]; - unsigned int acrs[NUM_ACRS]; - unsigned long orig_gpr2; - s390_fp_regs fp_regs; - /* - * These per registers are in here so that gdb can modify them - * itself as there is no "official" ptrace interface for hardware - * watchpoints. This is the way intel does it. - */ - per_struct per_info; - unsigned long ieee_instruction_pointer; - /* Used to give failing instruction back to user for ieee exceptions */ -}; - -#ifdef __KERNEL__ -/* - * These are defined as per linux/ptrace.h, which see. - */ -#define arch_has_single_step() (1) -struct task_struct; -extern void user_enable_single_step(struct task_struct *); -extern void user_disable_single_step(struct task_struct *); - -#define __ARCH_WANT_COMPAT_SYS_PTRACE - -#define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0) -#define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN) -#define regs_return_value(regs)((regs)->gprs[2]) -#define profile_pc(regs) instruction_pointer(regs) -extern void show_regs(struct pt_regs * regs); -#endif /* __KERNEL__ */ -#endif /* __ASSEMBLY__ */ - -#endif /* _S390_PTRACE_H */ diff --git a/include/asm-s390/qdio.h b/include/asm-s390/qdio.h deleted file mode 100644 index 6813772171f2..000000000000 --- a/include/asm-s390/qdio.h +++ /dev/null @@ -1,382 +0,0 @@ -/* - * linux/include/asm-s390/qdio.h - * - * Copyright 2000,2008 IBM Corp. - * Author(s): Utz Bacher - * Jan Glauber - * - */ -#ifndef __QDIO_H__ -#define __QDIO_H__ - -#include -#include -#include - -#define QDIO_MAX_QUEUES_PER_IRQ 32 -#define QDIO_MAX_BUFFERS_PER_Q 128 -#define QDIO_MAX_BUFFERS_MASK (QDIO_MAX_BUFFERS_PER_Q - 1) -#define QDIO_MAX_ELEMENTS_PER_BUFFER 16 -#define QDIO_SBAL_SIZE 256 - -#define QDIO_QETH_QFMT 0 -#define QDIO_ZFCP_QFMT 1 -#define QDIO_IQDIO_QFMT 2 - -/** - * struct qdesfmt0 - queue descriptor, format 0 - * @sliba: storage list information block address - * @sla: storage list address - * @slsba: storage list state block address - * @akey: access key for DLIB - * @bkey: access key for SL - * @ckey: access key for SBALs - * @dkey: access key for SLSB - */ -struct qdesfmt0 { - u64 sliba; - u64 sla; - u64 slsba; - u32 : 32; - u32 akey : 4; - u32 bkey : 4; - u32 ckey : 4; - u32 dkey : 4; - u32 : 16; -} __attribute__ ((packed)); - -/** - * struct qdr - queue description record (QDR) - * @qfmt: queue format - * @pfmt: implementation dependent parameter format - * @ac: adapter characteristics - * @iqdcnt: input queue descriptor count - * @oqdcnt: output queue descriptor count - * @iqdsz: inpout queue descriptor size - * @oqdsz: output queue descriptor size - * @qiba: queue information block address - * @qkey: queue information block key - * @qdf0: queue descriptions - */ -struct qdr { - u32 qfmt : 8; - u32 pfmt : 8; - u32 : 8; - u32 ac : 8; - u32 : 8; - u32 iqdcnt : 8; - u32 : 8; - u32 oqdcnt : 8; - u32 : 8; - u32 iqdsz : 8; - u32 : 8; - u32 oqdsz : 8; - /* private: */ - u32 res[9]; - /* public: */ - u64 qiba; - u32 : 32; - u32 qkey : 4; - u32 : 28; - struct qdesfmt0 qdf0[126]; -} __attribute__ ((packed, aligned(4096))); - -#define QIB_AC_OUTBOUND_PCI_SUPPORTED 0x40 -#define QIB_RFLAGS_ENABLE_QEBSM 0x80 - -/** - * struct qib - queue information block (QIB) - * @qfmt: queue format - * @pfmt: implementation dependent parameter format - * @rflags: QEBSM - * @ac: adapter characteristics - * @isliba: absolute address of first input SLIB - * @osliba: absolute address of first output SLIB - * @ebcnam: adapter identifier in EBCDIC - * @parm: implementation dependent parameters - */ -struct qib { - u32 qfmt : 8; - u32 pfmt : 8; - u32 rflags : 8; - u32 ac : 8; - u32 : 32; - u64 isliba; - u64 osliba; - u32 : 32; - u32 : 32; - u8 ebcnam[8]; - /* private: */ - u8 res[88]; - /* public: */ - u8 parm[QDIO_MAX_BUFFERS_PER_Q]; -} __attribute__ ((packed, aligned(256))); - -/** - * struct slibe - storage list information block element (SLIBE) - * @parms: implementation dependent parameters - */ -struct slibe { - u64 parms; -}; - -/** - * struct slib - storage list information block (SLIB) - * @nsliba: next SLIB address (if any) - * @sla: SL address - * @slsba: SLSB address - * @slibe: SLIB elements - */ -struct slib { - u64 nsliba; - u64 sla; - u64 slsba; - /* private: */ - u8 res[1000]; - /* public: */ - struct slibe slibe[QDIO_MAX_BUFFERS_PER_Q]; -} __attribute__ ((packed, aligned(2048))); - -/** - * struct sbal_flags - storage block address list flags - * @last: last entry - * @cont: contiguous storage - * @frag: fragmentation - */ -struct sbal_flags { - u8 : 1; - u8 last : 1; - u8 cont : 1; - u8 : 1; - u8 frag : 2; - u8 : 2; -} __attribute__ ((packed)); - -#define SBAL_FLAGS_FIRST_FRAG 0x04000000UL -#define SBAL_FLAGS_MIDDLE_FRAG 0x08000000UL -#define SBAL_FLAGS_LAST_FRAG 0x0c000000UL -#define SBAL_FLAGS_LAST_ENTRY 0x40000000UL -#define SBAL_FLAGS_CONTIGUOUS 0x20000000UL - -#define SBAL_FLAGS0_DATA_CONTINUATION 0x20UL - -/* Awesome OpenFCP extensions */ -#define SBAL_FLAGS0_TYPE_STATUS 0x00UL -#define SBAL_FLAGS0_TYPE_WRITE 0x08UL -#define SBAL_FLAGS0_TYPE_READ 0x10UL -#define SBAL_FLAGS0_TYPE_WRITE_READ 0x18UL -#define SBAL_FLAGS0_MORE_SBALS 0x04UL -#define SBAL_FLAGS0_COMMAND 0x02UL -#define SBAL_FLAGS0_LAST_SBAL 0x00UL -#define SBAL_FLAGS0_ONLY_SBAL SBAL_FLAGS0_COMMAND -#define SBAL_FLAGS0_MIDDLE_SBAL SBAL_FLAGS0_MORE_SBALS -#define SBAL_FLAGS0_FIRST_SBAL SBAL_FLAGS0_MORE_SBALS | SBAL_FLAGS0_COMMAND -#define SBAL_FLAGS0_PCI 0x40 - -/** - * struct sbal_sbalf_0 - sbal flags for sbale 0 - * @pci: PCI indicator - * @cont: data continuation - * @sbtype: storage-block type (FCP) - */ -struct sbal_sbalf_0 { - u8 : 1; - u8 pci : 1; - u8 cont : 1; - u8 sbtype : 2; - u8 : 3; -} __attribute__ ((packed)); - -/** - * struct sbal_sbalf_1 - sbal flags for sbale 1 - * @key: storage key - */ -struct sbal_sbalf_1 { - u8 : 4; - u8 key : 4; -} __attribute__ ((packed)); - -/** - * struct sbal_sbalf_14 - sbal flags for sbale 14 - * @erridx: error index - */ -struct sbal_sbalf_14 { - u8 : 4; - u8 erridx : 4; -} __attribute__ ((packed)); - -/** - * struct sbal_sbalf_15 - sbal flags for sbale 15 - * @reason: reason for error state - */ -struct sbal_sbalf_15 { - u8 reason; -} __attribute__ ((packed)); - -/** - * union sbal_sbalf - storage block address list flags - * @i0: sbalf0 - * @i1: sbalf1 - * @i14: sbalf14 - * @i15: sblaf15 - * @value: raw value - */ -union sbal_sbalf { - struct sbal_sbalf_0 i0; - struct sbal_sbalf_1 i1; - struct sbal_sbalf_14 i14; - struct sbal_sbalf_15 i15; - u8 value; -}; - -/** - * struct qdio_buffer_element - SBAL entry - * @flags: flags - * @length: length - * @addr: address -*/ -struct qdio_buffer_element { - u32 flags; - u32 length; -#ifdef CONFIG_32BIT - /* private: */ - void *reserved; - /* public: */ -#endif - void *addr; -} __attribute__ ((packed, aligned(16))); - -/** - * struct qdio_buffer - storage block address list (SBAL) - * @element: SBAL entries - */ -struct qdio_buffer { - struct qdio_buffer_element element[QDIO_MAX_ELEMENTS_PER_BUFFER]; -} __attribute__ ((packed, aligned(256))); - -/** - * struct sl_element - storage list entry - * @sbal: absolute SBAL address - */ -struct sl_element { -#ifdef CONFIG_32BIT - /* private: */ - unsigned long reserved; - /* public: */ -#endif - unsigned long sbal; -} __attribute__ ((packed)); - -/** - * struct sl - storage list (SL) - * @element: SL entries - */ -struct sl { - struct sl_element element[QDIO_MAX_BUFFERS_PER_Q]; -} __attribute__ ((packed, aligned(1024))); - -/** - * struct slsb - storage list state block (SLSB) - * @val: state per buffer - */ -struct slsb { - u8 val[QDIO_MAX_BUFFERS_PER_Q]; -} __attribute__ ((packed, aligned(256))); - -struct qdio_ssqd_desc { - u8 flags; - u8:8; - u16 sch; - u8 qfmt; - u8 parm; - u8 qdioac1; - u8 sch_class; - u8 pcnt; - u8 icnt; - u8:8; - u8 ocnt; - u8:8; - u8 mbccnt; - u16 qdioac2; - u64 sch_token; - u64:64; -} __attribute__ ((packed)); - -/* params are: ccw_device, qdio_error, queue_number, - first element processed, number of elements processed, int_parm */ -typedef void qdio_handler_t(struct ccw_device *, unsigned int, int, - int, int, unsigned long); - -/* qdio errors reported to the upper-layer program */ -#define QDIO_ERROR_SIGA_ACCESS_EXCEPTION 0x10 -#define QDIO_ERROR_SIGA_BUSY 0x20 -#define QDIO_ERROR_ACTIVATE_CHECK_CONDITION 0x40 -#define QDIO_ERROR_SLSB_STATE 0x80 - -/* for qdio_initialize */ -#define QDIO_INBOUND_0COPY_SBALS 0x01 -#define QDIO_OUTBOUND_0COPY_SBALS 0x02 -#define QDIO_USE_OUTBOUND_PCIS 0x04 - -/* for qdio_cleanup */ -#define QDIO_FLAG_CLEANUP_USING_CLEAR 0x01 -#define QDIO_FLAG_CLEANUP_USING_HALT 0x02 - -/** - * struct qdio_initialize - qdio initalization data - * @cdev: associated ccw device - * @q_format: queue format - * @adapter_name: name for the adapter - * @qib_param_field_format: format for qib_parm_field - * @qib_param_field: pointer to 128 bytes or NULL, if no param field - * @input_slib_elements: pointer to no_input_qs * 128 words of data or NULL - * @output_slib_elements: pointer to no_output_qs * 128 words of data or NULL - * @no_input_qs: number of input queues - * @no_output_qs: number of output queues - * @input_handler: handler to be called for input queues - * @output_handler: handler to be called for output queues - * @int_parm: interruption parameter - * @flags: initialization flags - * @input_sbal_addr_array: address of no_input_qs * 128 pointers - * @output_sbal_addr_array: address of no_output_qs * 128 pointers - */ -struct qdio_initialize { - struct ccw_device *cdev; - unsigned char q_format; - unsigned char adapter_name[8]; - unsigned int qib_param_field_format; - unsigned char *qib_param_field; - unsigned long *input_slib_elements; - unsigned long *output_slib_elements; - unsigned int no_input_qs; - unsigned int no_output_qs; - qdio_handler_t *input_handler; - qdio_handler_t *output_handler; - unsigned long int_parm; - unsigned long flags; - void **input_sbal_addr_array; - void **output_sbal_addr_array; -}; - -#define QDIO_STATE_INACTIVE 0x00000002 /* after qdio_cleanup */ -#define QDIO_STATE_ESTABLISHED 0x00000004 /* after qdio_establish */ -#define QDIO_STATE_ACTIVE 0x00000008 /* after qdio_activate */ -#define QDIO_STATE_STOPPED 0x00000010 /* after queues went down */ - -#define QDIO_FLAG_SYNC_INPUT 0x01 -#define QDIO_FLAG_SYNC_OUTPUT 0x02 -#define QDIO_FLAG_PCI_OUT 0x10 - -extern int qdio_initialize(struct qdio_initialize *init_data); -extern int qdio_allocate(struct qdio_initialize *init_data); -extern int qdio_establish(struct qdio_initialize *init_data); -extern int qdio_activate(struct ccw_device *); - -extern int do_QDIO(struct ccw_device*, unsigned int flags, - int q_nr, int qidx, int count); -extern int qdio_cleanup(struct ccw_device*, int how); -extern int qdio_shutdown(struct ccw_device*, int how); -extern int qdio_free(struct ccw_device *); -extern struct qdio_ssqd_desc *qdio_get_ssqd_desc(struct ccw_device *cdev); - -#endif /* __QDIO_H__ */ diff --git a/include/asm-s390/qeth.h b/include/asm-s390/qeth.h deleted file mode 100644 index 930d378ef75a..000000000000 --- a/include/asm-s390/qeth.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * include/asm-s390/qeth.h - * - * ioctl definitions for qeth driver - * - * Copyright (C) 2004 IBM Corporation - * - * Author(s): Thomas Spatzier - * - */ -#ifndef __ASM_S390_QETH_IOCTL_H__ -#define __ASM_S390_QETH_IOCTL_H__ -#include - -#define SIOC_QETH_ARP_SET_NO_ENTRIES (SIOCDEVPRIVATE) -#define SIOC_QETH_ARP_QUERY_INFO (SIOCDEVPRIVATE + 1) -#define SIOC_QETH_ARP_ADD_ENTRY (SIOCDEVPRIVATE + 2) -#define SIOC_QETH_ARP_REMOVE_ENTRY (SIOCDEVPRIVATE + 3) -#define SIOC_QETH_ARP_FLUSH_CACHE (SIOCDEVPRIVATE + 4) -#define SIOC_QETH_ADP_SET_SNMP_CONTROL (SIOCDEVPRIVATE + 5) -#define SIOC_QETH_GET_CARD_TYPE (SIOCDEVPRIVATE + 6) - -struct qeth_arp_cache_entry { - __u8 macaddr[6]; - __u8 reserved1[2]; - __u8 ipaddr[16]; /* for both IPv4 and IPv6 */ - __u8 reserved2[32]; -} __attribute__ ((packed)); - -struct qeth_arp_qi_entry7 { - __u8 media_specific[32]; - __u8 macaddr_type; - __u8 ipaddr_type; - __u8 macaddr[6]; - __u8 ipaddr[4]; -} __attribute__((packed)); - -struct qeth_arp_qi_entry7_short { - __u8 macaddr_type; - __u8 ipaddr_type; - __u8 macaddr[6]; - __u8 ipaddr[4]; -} __attribute__((packed)); - -struct qeth_arp_qi_entry5 { - __u8 media_specific[32]; - __u8 macaddr_type; - __u8 ipaddr_type; - __u8 ipaddr[4]; -} __attribute__((packed)); - -struct qeth_arp_qi_entry5_short { - __u8 macaddr_type; - __u8 ipaddr_type; - __u8 ipaddr[4]; -} __attribute__((packed)); - -/* - * can be set by user if no "media specific information" is wanted - * -> saves a lot of space in user space buffer - */ -#define QETH_QARP_STRIP_ENTRIES 0x8000 -#define QETH_QARP_REQUEST_MASK 0x00ff - -/* data sent to user space as result of query arp ioctl */ -#define QETH_QARP_USER_DATA_SIZE 20000 -#define QETH_QARP_MASK_OFFSET 4 -#define QETH_QARP_ENTRIES_OFFSET 6 -struct qeth_arp_query_user_data { - union { - __u32 data_len; /* set by user space program */ - __u32 no_entries; /* set by kernel */ - } u; - __u16 mask_bits; - char *entries; -} __attribute__((packed)); - -#endif /* __ASM_S390_QETH_IOCTL_H__ */ diff --git a/include/asm-s390/reset.h b/include/asm-s390/reset.h deleted file mode 100644 index f584f4a52581..000000000000 --- a/include/asm-s390/reset.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-s390/reset.h - * - * Copyright IBM Corp. 2006 - * Author(s): Heiko Carstens - */ - -#ifndef _ASM_S390_RESET_H -#define _ASM_S390_RESET_H - -#include - -struct reset_call { - struct list_head list; - void (*fn)(void); -}; - -extern void register_reset_call(struct reset_call *reset); -extern void unregister_reset_call(struct reset_call *reset); -extern void s390_reset_system(void); -#endif /* _ASM_S390_RESET_H */ diff --git a/include/asm-s390/resource.h b/include/asm-s390/resource.h deleted file mode 100644 index 366c01de04f2..000000000000 --- a/include/asm-s390/resource.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * include/asm-s390/resource.h - * - * S390 version - * - * Derived from "include/asm-i386/resources.h" - */ - -#ifndef _S390_RESOURCE_H -#define _S390_RESOURCE_H - -#include - -#endif - diff --git a/include/asm-s390/rwsem.h b/include/asm-s390/rwsem.h deleted file mode 100644 index 9d2a17971805..000000000000 --- a/include/asm-s390/rwsem.h +++ /dev/null @@ -1,387 +0,0 @@ -#ifndef _S390_RWSEM_H -#define _S390_RWSEM_H - -/* - * include/asm-s390/rwsem.h - * - * S390 version - * Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) - * - * Based on asm-alpha/semaphore.h and asm-i386/rwsem.h - */ - -/* - * - * The MSW of the count is the negated number of active writers and waiting - * lockers, and the LSW is the total number of active locks - * - * The lock count is initialized to 0 (no active and no waiting lockers). - * - * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case of an - * uncontended lock. This can be determined because XADD returns the old value. - * Readers increment by 1 and see a positive value when uncontended, negative - * if there are writers (and maybe) readers waiting (in which case it goes to - * sleep). - * - * The value of WAITING_BIAS supports up to 32766 waiting processes. This can - * be extended to 65534 by manually checking the whole MSW rather than relying - * on the S flag. - * - * The value of ACTIVE_BIAS supports up to 65535 active processes. - * - * This should be totally fair - if anything is waiting, a process that wants a - * lock will go to the back of the queue. When the currently active lock is - * released, if there's a writer at the front of the queue, then that and only - * that will be woken up; if there's a bunch of consequtive readers at the - * front, then they'll all be woken up, but no other readers will be. - */ - -#ifndef _LINUX_RWSEM_H -#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead" -#endif - -#ifdef __KERNEL__ - -#include -#include - -struct rwsem_waiter; - -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *); -extern struct rw_semaphore *rwsem_downgrade_write(struct rw_semaphore *); - -/* - * the semaphore definition - */ -struct rw_semaphore { - signed long count; - spinlock_t wait_lock; - struct list_head wait_list; -#ifdef CONFIG_DEBUG_LOCK_ALLOC - struct lockdep_map dep_map; -#endif -}; - -#ifndef __s390x__ -#define RWSEM_UNLOCKED_VALUE 0x00000000 -#define RWSEM_ACTIVE_BIAS 0x00000001 -#define RWSEM_ACTIVE_MASK 0x0000ffff -#define RWSEM_WAITING_BIAS (-0x00010000) -#else /* __s390x__ */ -#define RWSEM_UNLOCKED_VALUE 0x0000000000000000L -#define RWSEM_ACTIVE_BIAS 0x0000000000000001L -#define RWSEM_ACTIVE_MASK 0x00000000ffffffffL -#define RWSEM_WAITING_BIAS (-0x0000000100000000L) -#endif /* __s390x__ */ -#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS -#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) - -/* - * initialisation - */ - -#ifdef CONFIG_DEBUG_LOCK_ALLOC -# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } -#else -# define __RWSEM_DEP_MAP_INIT(lockname) -#endif - -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait.lock), \ - LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - -static inline void init_rwsem(struct rw_semaphore *sem) -{ - sem->count = RWSEM_UNLOCKED_VALUE; - spin_lock_init(&sem->wait_lock); - INIT_LIST_HEAD(&sem->wait_list); -} - -extern void __init_rwsem(struct rw_semaphore *sem, const char *name, - struct lock_class_key *key); - -#define init_rwsem(sem) \ -do { \ - static struct lock_class_key __key; \ - \ - __init_rwsem((sem), #sem, &__key); \ -} while (0) - - -/* - * lock for reading - */ -static inline void __down_read(struct rw_semaphore *sem) -{ - signed long old, new; - - asm volatile( -#ifndef __s390x__ - " l %0,0(%3)\n" - "0: lr %1,%0\n" - " ahi %1,%5\n" - " cs %0,%1,0(%3)\n" - " jl 0b" -#else /* __s390x__ */ - " lg %0,0(%3)\n" - "0: lgr %1,%0\n" - " aghi %1,%5\n" - " csg %0,%1,0(%3)\n" - " jl 0b" -#endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), - "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory"); - if (old < 0) - rwsem_down_read_failed(sem); -} - -/* - * trylock for reading -- returns 1 if successful, 0 if contention - */ -static inline int __down_read_trylock(struct rw_semaphore *sem) -{ - signed long old, new; - - asm volatile( -#ifndef __s390x__ - " l %0,0(%3)\n" - "0: ltr %1,%0\n" - " jm 1f\n" - " ahi %1,%5\n" - " cs %0,%1,0(%3)\n" - " jl 0b\n" - "1:" -#else /* __s390x__ */ - " lg %0,0(%3)\n" - "0: ltgr %1,%0\n" - " jm 1f\n" - " aghi %1,%5\n" - " csg %0,%1,0(%3)\n" - " jl 0b\n" - "1:" -#endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), - "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory"); - return old >= 0 ? 1 : 0; -} - -/* - * lock for writing - */ -static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) -{ - signed long old, new, tmp; - - tmp = RWSEM_ACTIVE_WRITE_BIAS; - asm volatile( -#ifndef __s390x__ - " l %0,0(%3)\n" - "0: lr %1,%0\n" - " a %1,%5\n" - " cs %0,%1,0(%3)\n" - " jl 0b" -#else /* __s390x__ */ - " lg %0,0(%3)\n" - "0: lgr %1,%0\n" - " ag %1,%5\n" - " csg %0,%1,0(%3)\n" - " jl 0b" -#endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), "m" (tmp) - : "cc", "memory"); - if (old != 0) - rwsem_down_write_failed(sem); -} - -static inline void __down_write(struct rw_semaphore *sem) -{ - __down_write_nested(sem, 0); -} - -/* - * trylock for writing -- returns 1 if successful, 0 if contention - */ -static inline int __down_write_trylock(struct rw_semaphore *sem) -{ - signed long old; - - asm volatile( -#ifndef __s390x__ - " l %0,0(%2)\n" - "0: ltr %0,%0\n" - " jnz 1f\n" - " cs %0,%4,0(%2)\n" - " jl 0b\n" -#else /* __s390x__ */ - " lg %0,0(%2)\n" - "0: ltgr %0,%0\n" - " jnz 1f\n" - " csg %0,%4,0(%2)\n" - " jl 0b\n" -#endif /* __s390x__ */ - "1:" - : "=&d" (old), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), - "d" (RWSEM_ACTIVE_WRITE_BIAS) : "cc", "memory"); - return (old == RWSEM_UNLOCKED_VALUE) ? 1 : 0; -} - -/* - * unlock after reading - */ -static inline void __up_read(struct rw_semaphore *sem) -{ - signed long old, new; - - asm volatile( -#ifndef __s390x__ - " l %0,0(%3)\n" - "0: lr %1,%0\n" - " ahi %1,%5\n" - " cs %0,%1,0(%3)\n" - " jl 0b" -#else /* __s390x__ */ - " lg %0,0(%3)\n" - "0: lgr %1,%0\n" - " aghi %1,%5\n" - " csg %0,%1,0(%3)\n" - " jl 0b" -#endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), - "i" (-RWSEM_ACTIVE_READ_BIAS) - : "cc", "memory"); - if (new < 0) - if ((new & RWSEM_ACTIVE_MASK) == 0) - rwsem_wake(sem); -} - -/* - * unlock after writing - */ -static inline void __up_write(struct rw_semaphore *sem) -{ - signed long old, new, tmp; - - tmp = -RWSEM_ACTIVE_WRITE_BIAS; - asm volatile( -#ifndef __s390x__ - " l %0,0(%3)\n" - "0: lr %1,%0\n" - " a %1,%5\n" - " cs %0,%1,0(%3)\n" - " jl 0b" -#else /* __s390x__ */ - " lg %0,0(%3)\n" - "0: lgr %1,%0\n" - " ag %1,%5\n" - " csg %0,%1,0(%3)\n" - " jl 0b" -#endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), "m" (tmp) - : "cc", "memory"); - if (new < 0) - if ((new & RWSEM_ACTIVE_MASK) == 0) - rwsem_wake(sem); -} - -/* - * downgrade write lock to read lock - */ -static inline void __downgrade_write(struct rw_semaphore *sem) -{ - signed long old, new, tmp; - - tmp = -RWSEM_WAITING_BIAS; - asm volatile( -#ifndef __s390x__ - " l %0,0(%3)\n" - "0: lr %1,%0\n" - " a %1,%5\n" - " cs %0,%1,0(%3)\n" - " jl 0b" -#else /* __s390x__ */ - " lg %0,0(%3)\n" - "0: lgr %1,%0\n" - " ag %1,%5\n" - " csg %0,%1,0(%3)\n" - " jl 0b" -#endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), "m" (tmp) - : "cc", "memory"); - if (new > 1) - rwsem_downgrade_wake(sem); -} - -/* - * implement atomic add functionality - */ -static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem) -{ - signed long old, new; - - asm volatile( -#ifndef __s390x__ - " l %0,0(%3)\n" - "0: lr %1,%0\n" - " ar %1,%5\n" - " cs %0,%1,0(%3)\n" - " jl 0b" -#else /* __s390x__ */ - " lg %0,0(%3)\n" - "0: lgr %1,%0\n" - " agr %1,%5\n" - " csg %0,%1,0(%3)\n" - " jl 0b" -#endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), "d" (delta) - : "cc", "memory"); -} - -/* - * implement exchange and add functionality - */ -static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem) -{ - signed long old, new; - - asm volatile( -#ifndef __s390x__ - " l %0,0(%3)\n" - "0: lr %1,%0\n" - " ar %1,%5\n" - " cs %0,%1,0(%3)\n" - " jl 0b" -#else /* __s390x__ */ - " lg %0,0(%3)\n" - "0: lgr %1,%0\n" - " agr %1,%5\n" - " csg %0,%1,0(%3)\n" - " jl 0b" -#endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), "d" (delta) - : "cc", "memory"); - return new; -} - -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - -#endif /* __KERNEL__ */ -#endif /* _S390_RWSEM_H */ diff --git a/include/asm-s390/s390_ext.h b/include/asm-s390/s390_ext.h deleted file mode 100644 index 2afc060266a2..000000000000 --- a/include/asm-s390/s390_ext.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef _S390_EXTINT_H -#define _S390_EXTINT_H - -/* - * include/asm-s390/s390_ext.h - * - * S390 version - * Copyright IBM Corp. 1999,2007 - * Author(s): Holger Smolinski (Holger.Smolinski@de.ibm.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com) - */ - -#include - -typedef void (*ext_int_handler_t)(__u16 code); - -typedef struct ext_int_info_t { - struct ext_int_info_t *next; - ext_int_handler_t handler; - __u16 code; -} ext_int_info_t; - -extern ext_int_info_t *ext_int_hash[]; - -int register_external_interrupt(__u16 code, ext_int_handler_t handler); -int register_early_external_interrupt(__u16 code, ext_int_handler_t handler, - ext_int_info_t *info); -int unregister_external_interrupt(__u16 code, ext_int_handler_t handler); -int unregister_early_external_interrupt(__u16 code, ext_int_handler_t handler, - ext_int_info_t *info); - -#endif diff --git a/include/asm-s390/s390_rdev.h b/include/asm-s390/s390_rdev.h deleted file mode 100644 index 6fa20442a48c..000000000000 --- a/include/asm-s390/s390_rdev.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * include/asm-s390/ccwdev.h - * - * Copyright (C) 2002,2005 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Cornelia Huck - * Carsten Otte - * - * Interface for s390 root device - */ - -#ifndef _S390_RDEV_H_ -#define _S390_RDEV_H_ -extern struct device *s390_root_dev_register(const char *); -extern void s390_root_dev_unregister(struct device *); -#endif /* _S390_RDEV_H_ */ diff --git a/include/asm-s390/scatterlist.h b/include/asm-s390/scatterlist.h deleted file mode 100644 index 29ec8e28c8df..000000000000 --- a/include/asm-s390/scatterlist.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASMS390_SCATTERLIST_H -#define _ASMS390_SCATTERLIST_H - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - unsigned int length; -}; - -#ifdef __s390x__ -#define ISA_DMA_THRESHOLD (0xffffffffffffffffUL) -#else -#define ISA_DMA_THRESHOLD (0xffffffffUL) -#endif - -#endif /* _ASMS390X_SCATTERLIST_H */ diff --git a/include/asm-s390/schid.h b/include/asm-s390/schid.h deleted file mode 100644 index 825503cf3dc2..000000000000 --- a/include/asm-s390/schid.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef ASM_SCHID_H -#define ASM_SCHID_H - -struct subchannel_id { - __u32 cssid : 8; - __u32 : 4; - __u32 m : 1; - __u32 ssid : 2; - __u32 one : 1; - __u32 sch_no : 16; -} __attribute__ ((packed, aligned(4))); - -#ifdef __KERNEL__ -#include - -/* Helper function for sane state of pre-allocated subchannel_id. */ -static inline void -init_subchannel_id(struct subchannel_id *schid) -{ - memset(schid, 0, sizeof(struct subchannel_id)); - schid->one = 1; -} - -static inline int -schid_equal(struct subchannel_id *schid1, struct subchannel_id *schid2) -{ - return !memcmp(schid1, schid2, sizeof(struct subchannel_id)); -} - -#endif /* __KERNEL__ */ - -#endif /* ASM_SCHID_H */ diff --git a/include/asm-s390/sclp.h b/include/asm-s390/sclp.h deleted file mode 100644 index fed7bee650a0..000000000000 --- a/include/asm-s390/sclp.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * include/asm-s390/sclp.h - * - * Copyright IBM Corp. 2007 - * Author(s): Heiko Carstens - */ - -#ifndef _ASM_S390_SCLP_H -#define _ASM_S390_SCLP_H - -#include -#include - -#define SCLP_CHP_INFO_MASK_SIZE 32 - -struct sclp_chp_info { - u8 recognized[SCLP_CHP_INFO_MASK_SIZE]; - u8 standby[SCLP_CHP_INFO_MASK_SIZE]; - u8 configured[SCLP_CHP_INFO_MASK_SIZE]; -}; - -#define LOADPARM_LEN 8 - -struct sclp_ipl_info { - int is_valid; - int has_dump; - char loadparm[LOADPARM_LEN]; -}; - -struct sclp_cpu_entry { - u8 address; - u8 reserved0[13]; - u8 type; - u8 reserved1; -} __attribute__((packed)); - -struct sclp_cpu_info { - unsigned int configured; - unsigned int standby; - unsigned int combined; - int has_cpu_type; - struct sclp_cpu_entry cpu[255]; -}; - -int sclp_get_cpu_info(struct sclp_cpu_info *info); -int sclp_cpu_configure(u8 cpu); -int sclp_cpu_deconfigure(u8 cpu); -void sclp_facilities_detect(void); -unsigned long long sclp_get_rnmax(void); -unsigned long long sclp_get_rzm(void); -int sclp_sdias_blk_count(void); -int sclp_sdias_copy(void *dest, int blk_num, int nr_blks); -int sclp_chp_configure(struct chp_id chpid); -int sclp_chp_deconfigure(struct chp_id chpid); -int sclp_chp_read_info(struct sclp_chp_info *info); -void sclp_get_ipl_info(struct sclp_ipl_info *info); - -#endif /* _ASM_S390_SCLP_H */ diff --git a/include/asm-s390/sections.h b/include/asm-s390/sections.h deleted file mode 100644 index fbd9116eb17b..000000000000 --- a/include/asm-s390/sections.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _S390_SECTIONS_H -#define _S390_SECTIONS_H - -#include - -extern char _eshared[], _ehead[]; - -#endif diff --git a/include/asm-s390/segment.h b/include/asm-s390/segment.h deleted file mode 100644 index 8bfce3475b1c..000000000000 --- a/include/asm-s390/segment.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _ASM_SEGMENT_H -#define _ASM_SEGMENT_H - -#endif diff --git a/include/asm-s390/sembuf.h b/include/asm-s390/sembuf.h deleted file mode 100644 index 32626b0cac4b..000000000000 --- a/include/asm-s390/sembuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _S390_SEMBUF_H -#define _S390_SEMBUF_H - -/* - * The semid64_ds structure for S/390 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem (for !__s390x__) - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ -#ifndef __s390x__ - unsigned long __unused1; -#endif /* ! __s390x__ */ - __kernel_time_t sem_ctime; /* last change time */ -#ifndef __s390x__ - unsigned long __unused2; -#endif /* ! __s390x__ */ - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _S390_SEMBUF_H */ diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h deleted file mode 100644 index 2bd9faeb3919..000000000000 --- a/include/asm-s390/setup.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * include/asm-s390/setup.h - * - * S390 version - * Copyright IBM Corp. 1999,2006 - */ - -#ifndef _ASM_S390_SETUP_H -#define _ASM_S390_SETUP_H - -#define COMMAND_LINE_SIZE 1024 - -#define ARCH_COMMAND_LINE_SIZE 896 - -#ifdef __KERNEL__ - -#include - -#define PARMAREA 0x10400 -#define MEMORY_CHUNKS 256 - -#ifndef __ASSEMBLY__ - -#ifndef __s390x__ -#define IPL_DEVICE (*(unsigned long *) (0x10404)) -#define INITRD_START (*(unsigned long *) (0x1040C)) -#define INITRD_SIZE (*(unsigned long *) (0x10414)) -#else /* __s390x__ */ -#define IPL_DEVICE (*(unsigned long *) (0x10400)) -#define INITRD_START (*(unsigned long *) (0x10408)) -#define INITRD_SIZE (*(unsigned long *) (0x10410)) -#endif /* __s390x__ */ -#define COMMAND_LINE ((char *) (0x10480)) - -#define CHUNK_READ_WRITE 0 -#define CHUNK_READ_ONLY 1 - -struct mem_chunk { - unsigned long addr; - unsigned long size; - int type; -}; - -extern struct mem_chunk memory_chunk[]; -extern unsigned long real_memory_size; - -void detect_memory_layout(struct mem_chunk chunk[]); - -#ifdef CONFIG_S390_SWITCH_AMODE -extern unsigned int switch_amode; -#else -#define switch_amode (0) -#endif - -#ifdef CONFIG_S390_EXEC_PROTECT -extern unsigned int s390_noexec; -#else -#define s390_noexec (0) -#endif - -/* - * Machine features detected in head.S - */ -extern unsigned long machine_flags; - -#define MACHINE_FLAG_VM (1UL << 0) -#define MACHINE_FLAG_IEEE (1UL << 1) -#define MACHINE_FLAG_CSP (1UL << 3) -#define MACHINE_FLAG_MVPG (1UL << 4) -#define MACHINE_FLAG_DIAG44 (1UL << 5) -#define MACHINE_FLAG_IDTE (1UL << 6) -#define MACHINE_FLAG_DIAG9C (1UL << 7) -#define MACHINE_FLAG_MVCOS (1UL << 8) -#define MACHINE_FLAG_KVM (1UL << 9) -#define MACHINE_FLAG_HPAGE (1UL << 10) -#define MACHINE_FLAG_PFMF (1UL << 11) - -#define MACHINE_IS_VM (machine_flags & MACHINE_FLAG_VM) -#define MACHINE_IS_KVM (machine_flags & MACHINE_FLAG_KVM) -#define MACHINE_HAS_DIAG9C (machine_flags & MACHINE_FLAG_DIAG9C) - -#ifndef __s390x__ -#define MACHINE_HAS_IEEE (machine_flags & MACHINE_FLAG_IEEE) -#define MACHINE_HAS_CSP (machine_flags & MACHINE_FLAG_CSP) -#define MACHINE_HAS_IDTE (0) -#define MACHINE_HAS_DIAG44 (1) -#define MACHINE_HAS_MVPG (machine_flags & MACHINE_FLAG_MVPG) -#define MACHINE_HAS_MVCOS (0) -#define MACHINE_HAS_HPAGE (0) -#define MACHINE_HAS_PFMF (0) -#else /* __s390x__ */ -#define MACHINE_HAS_IEEE (1) -#define MACHINE_HAS_CSP (1) -#define MACHINE_HAS_IDTE (machine_flags & MACHINE_FLAG_IDTE) -#define MACHINE_HAS_DIAG44 (machine_flags & MACHINE_FLAG_DIAG44) -#define MACHINE_HAS_MVPG (1) -#define MACHINE_HAS_MVCOS (machine_flags & MACHINE_FLAG_MVCOS) -#define MACHINE_HAS_HPAGE (machine_flags & MACHINE_FLAG_HPAGE) -#define MACHINE_HAS_PFMF (machine_flags & MACHINE_FLAG_PFMF) -#endif /* __s390x__ */ - -#define ZFCPDUMP_HSA_SIZE (32UL<<20) - -/* - * Console mode. Override with conmode= - */ -extern unsigned int console_mode; -extern unsigned int console_devno; -extern unsigned int console_irq; - -extern char vmhalt_cmd[]; -extern char vmpoff_cmd[]; - -#define CONSOLE_IS_UNDEFINED (console_mode == 0) -#define CONSOLE_IS_SCLP (console_mode == 1) -#define CONSOLE_IS_3215 (console_mode == 2) -#define CONSOLE_IS_3270 (console_mode == 3) -#define SET_CONSOLE_SCLP do { console_mode = 1; } while (0) -#define SET_CONSOLE_3215 do { console_mode = 2; } while (0) -#define SET_CONSOLE_3270 do { console_mode = 3; } while (0) - -#define NSS_NAME_SIZE 8 -extern char kernel_nss_name[]; - -#else /* __ASSEMBLY__ */ - -#ifndef __s390x__ -#define IPL_DEVICE 0x10404 -#define INITRD_START 0x1040C -#define INITRD_SIZE 0x10414 -#else /* __s390x__ */ -#define IPL_DEVICE 0x10400 -#define INITRD_START 0x10408 -#define INITRD_SIZE 0x10410 -#endif /* __s390x__ */ -#define COMMAND_LINE 0x10480 - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _ASM_S390_SETUP_H */ diff --git a/include/asm-s390/sfp-machine.h b/include/asm-s390/sfp-machine.h deleted file mode 100644 index 4e16aede4b06..000000000000 --- a/include/asm-s390/sfp-machine.h +++ /dev/null @@ -1,142 +0,0 @@ -/* Machine-dependent software floating-point definitions. - S/390 kernel version. - Copyright (C) 1997,1998,1999 Free Software Foundation, Inc. - This file is part of the GNU C Library. - Contributed by Richard Henderson (rth@cygnus.com), - Jakub Jelinek (jj@ultra.linux.cz), - David S. Miller (davem@redhat.com) and - Peter Maydell (pmaydell@chiark.greenend.org.uk). - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Library General Public License as - published by the Free Software Foundation; either version 2 of the - License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Library General Public License for more details. - - You should have received a copy of the GNU Library General Public - License along with the GNU C Library; see the file COPYING.LIB. If - not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - -#ifndef _SFP_MACHINE_H -#define _SFP_MACHINE_H - - -#define _FP_W_TYPE_SIZE 32 -#define _FP_W_TYPE unsigned int -#define _FP_WS_TYPE signed int -#define _FP_I_TYPE int - -#define _FP_MUL_MEAT_S(R,X,Y) \ - _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm) -#define _FP_MUL_MEAT_D(R,X,Y) \ - _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm) -#define _FP_MUL_MEAT_Q(R,X,Y) \ - _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm) - -#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y) -#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y) -#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y) - -#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1) -#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1 -#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1 -#define _FP_NANSIGN_S 0 -#define _FP_NANSIGN_D 0 -#define _FP_NANSIGN_Q 0 - -#define _FP_KEEPNANFRACP 1 - -/* - * If one NaN is signaling and the other is not, - * we choose that one, otherwise we choose X. - */ -#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \ - do { \ - if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs) \ - && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)) \ - { \ - R##_s = Y##_s; \ - _FP_FRAC_COPY_##wc(R,Y); \ - } \ - else \ - { \ - R##_s = X##_s; \ - _FP_FRAC_COPY_##wc(R,X); \ - } \ - R##_c = FP_CLS_NAN; \ - } while (0) - -/* Some assembly to speed things up. */ -#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) ({ \ - unsigned int __r2 = (x2) + (y2); \ - unsigned int __r1 = (x1); \ - unsigned int __r0 = (x0); \ - asm volatile( \ - " alr %2,%3\n" \ - " brc 12,0f\n" \ - " lhi 0,1\n" \ - " alr %1,0\n" \ - " brc 12,0f\n" \ - " alr %0,0\n" \ - "0:" \ - : "+&d" (__r2), "+&d" (__r1), "+&d" (__r0) \ - : "d" (y0), "i" (1) : "cc", "0" ); \ - asm volatile( \ - " alr %1,%2\n" \ - " brc 12,0f\n" \ - " ahi %0,1\n" \ - "0:" \ - : "+&d" (__r2), "+&d" (__r1) \ - : "d" (y1) : "cc"); \ - (r2) = __r2; \ - (r1) = __r1; \ - (r0) = __r0; \ -}) - -#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) ({ \ - unsigned int __r2 = (x2) - (y2); \ - unsigned int __r1 = (x1); \ - unsigned int __r0 = (x0); \ - asm volatile( \ - " slr %2,%3\n" \ - " brc 3,0f\n" \ - " lhi 0,1\n" \ - " slr %1,0\n" \ - " brc 3,0f\n" \ - " slr %0,0\n" \ - "0:" \ - : "+&d" (__r2), "+&d" (__r1), "+&d" (__r0) \ - : "d" (y0) : "cc", "0"); \ - asm volatile( \ - " slr %1,%2\n" \ - " brc 3,0f\n" \ - " ahi %0,-1\n" \ - "0:" \ - : "+&d" (__r2), "+&d" (__r1) \ - : "d" (y1) : "cc"); \ - (r2) = __r2; \ - (r1) = __r1; \ - (r0) = __r0; \ -}) - -#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0) - -/* Obtain the current rounding mode. */ -#define FP_ROUNDMODE mode - -/* Exception flags. */ -#define FP_EX_INVALID 0x800000 -#define FP_EX_DIVZERO 0x400000 -#define FP_EX_OVERFLOW 0x200000 -#define FP_EX_UNDERFLOW 0x100000 -#define FP_EX_INEXACT 0x080000 - -/* We write the results always */ -#define FP_INHIBIT_RESULTS 0 - -#endif diff --git a/include/asm-s390/sfp-util.h b/include/asm-s390/sfp-util.h deleted file mode 100644 index 0addc6466d95..000000000000 --- a/include/asm-s390/sfp-util.h +++ /dev/null @@ -1,77 +0,0 @@ -#include -#include -#include -#include - -#define add_ssaaaa(sh, sl, ah, al, bh, bl) ({ \ - unsigned int __sh = (ah); \ - unsigned int __sl = (al); \ - asm volatile( \ - " alr %1,%3\n" \ - " brc 12,0f\n" \ - " ahi %0,1\n" \ - "0: alr %0,%2" \ - : "+&d" (__sh), "+d" (__sl) \ - : "d" (bh), "d" (bl) : "cc"); \ - (sh) = __sh; \ - (sl) = __sl; \ -}) - -#define sub_ddmmss(sh, sl, ah, al, bh, bl) ({ \ - unsigned int __sh = (ah); \ - unsigned int __sl = (al); \ - asm volatile( \ - " slr %1,%3\n" \ - " brc 3,0f\n" \ - " ahi %0,-1\n" \ - "0: slr %0,%2" \ - : "+&d" (__sh), "+d" (__sl) \ - : "d" (bh), "d" (bl) : "cc"); \ - (sh) = __sh; \ - (sl) = __sl; \ -}) - -/* a umul b = a mul b + (a>=2<<31) ? b<<32:0 + (b>=2<<31) ? a<<32:0 */ -#define umul_ppmm(wh, wl, u, v) ({ \ - unsigned int __wh = u; \ - unsigned int __wl = v; \ - asm volatile( \ - " ltr 1,%0\n" \ - " mr 0,%1\n" \ - " jnm 0f\n" \ - " alr 0,%1\n" \ - "0: ltr %1,%1\n" \ - " jnm 1f\n" \ - " alr 0,%0\n" \ - "1: lr %0,0\n" \ - " lr %1,1\n" \ - : "+d" (__wh), "+d" (__wl) \ - : : "0", "1", "cc"); \ - wh = __wh; \ - wl = __wl; \ -}) - -#ifdef __s390x__ -#define udiv_qrnnd(q, r, n1, n0, d) \ - do { unsigned long __n; \ - unsigned int __r, __d; \ - __n = ((unsigned long)(n1) << 32) + n0; \ - __d = (d); \ - (q) = __n / __d; \ - (r) = __n % __d; \ - } while (0) -#else -#define udiv_qrnnd(q, r, n1, n0, d) \ - do { unsigned int __r; \ - (q) = __udiv_qrnnd (&__r, (n1), (n0), (d)); \ - (r) = __r; \ - } while (0) -extern unsigned long __udiv_qrnnd (unsigned int *, unsigned int, - unsigned int , unsigned int); -#endif - -#define UDIV_NEEDS_NORMALIZATION 0 - -#define abort() return 0 - -#define __BYTE_ORDER __BIG_ENDIAN diff --git a/include/asm-s390/shmbuf.h b/include/asm-s390/shmbuf.h deleted file mode 100644 index eed2e280ce37..000000000000 --- a/include/asm-s390/shmbuf.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef _S390_SHMBUF_H -#define _S390_SHMBUF_H - -/* - * The shmid64_ds structure for S/390 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem (for !__s390x__) - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ -#ifndef __s390x__ - unsigned long __unused1; -#endif /* ! __s390x__ */ - __kernel_time_t shm_dtime; /* last detach time */ -#ifndef __s390x__ - unsigned long __unused2; -#endif /* ! __s390x__ */ - __kernel_time_t shm_ctime; /* last change time */ -#ifndef __s390x__ - unsigned long __unused3; -#endif /* ! __s390x__ */ - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _S390_SHMBUF_H */ diff --git a/include/asm-s390/shmparam.h b/include/asm-s390/shmparam.h deleted file mode 100644 index c2e0c0508e73..000000000000 --- a/include/asm-s390/shmparam.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * include/asm-s390/shmparam.h - * - * S390 version - * - * Derived from "include/asm-i386/shmparam.h" - */ -#ifndef _ASM_S390_SHMPARAM_H -#define _ASM_S390_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* _ASM_S390_SHMPARAM_H */ diff --git a/include/asm-s390/sigcontext.h b/include/asm-s390/sigcontext.h deleted file mode 100644 index aeb6e0b13329..000000000000 --- a/include/asm-s390/sigcontext.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * include/asm-s390/sigcontext.h - * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - */ - -#ifndef _ASM_S390_SIGCONTEXT_H -#define _ASM_S390_SIGCONTEXT_H - -#include - -#define __NUM_GPRS 16 -#define __NUM_FPRS 16 -#define __NUM_ACRS 16 - -#ifndef __s390x__ - -/* Has to be at least _NSIG_WORDS from asm/signal.h */ -#define _SIGCONTEXT_NSIG 64 -#define _SIGCONTEXT_NSIG_BPW 32 -/* Size of stack frame allocated when calling signal handler. */ -#define __SIGNAL_FRAMESIZE 96 - -#else /* __s390x__ */ - -/* Has to be at least _NSIG_WORDS from asm/signal.h */ -#define _SIGCONTEXT_NSIG 64 -#define _SIGCONTEXT_NSIG_BPW 64 -/* Size of stack frame allocated when calling signal handler. */ -#define __SIGNAL_FRAMESIZE 160 - -#endif /* __s390x__ */ - -#define _SIGCONTEXT_NSIG_WORDS (_SIGCONTEXT_NSIG / _SIGCONTEXT_NSIG_BPW) -#define _SIGMASK_COPY_SIZE (sizeof(unsigned long)*_SIGCONTEXT_NSIG_WORDS) - -typedef struct -{ - unsigned long mask; - unsigned long addr; -} __attribute__ ((aligned(8))) _psw_t; - -typedef struct -{ - _psw_t psw; - unsigned long gprs[__NUM_GPRS]; - unsigned int acrs[__NUM_ACRS]; -} _s390_regs_common; - -typedef struct -{ - unsigned int fpc; - double fprs[__NUM_FPRS]; -} _s390_fp_regs; - -typedef struct -{ - _s390_regs_common regs; - _s390_fp_regs fpregs; -} _sigregs; - -struct sigcontext -{ - unsigned long oldmask[_SIGCONTEXT_NSIG_WORDS]; - _sigregs __user *sregs; -}; - - -#endif - diff --git a/include/asm-s390/siginfo.h b/include/asm-s390/siginfo.h deleted file mode 100644 index e0ff1ab054be..000000000000 --- a/include/asm-s390/siginfo.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * include/asm-s390/siginfo.h - * - * S390 version - * - * Derived from "include/asm-i386/siginfo.h" - */ - -#ifndef _S390_SIGINFO_H -#define _S390_SIGINFO_H - -#ifdef __s390x__ -#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) -#endif - -#include - -#endif diff --git a/include/asm-s390/signal.h b/include/asm-s390/signal.h deleted file mode 100644 index f6cfddb278cb..000000000000 --- a/include/asm-s390/signal.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * include/asm-s390/signal.h - * - * S390 version - * - * Derived from "include/asm-i386/signal.h" - */ - -#ifndef _ASMS390_SIGNAL_H -#define _ASMS390_SIGNAL_H - -#include -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; -struct pt_regs; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ -#include -#define _NSIG _SIGCONTEXT_NSIG -#define _NSIG_BPW _SIGCONTEXT_NSIG_BPW -#define _NSIG_WORDS _SIGCONTEXT_NSIG_WORDS - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; -#ifndef __s390x__ /* lovely */ - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -#else /* __s390x__ */ - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; -#endif /* __s390x__ */ -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - - -#endif diff --git a/include/asm-s390/sigp.h b/include/asm-s390/sigp.h deleted file mode 100644 index e16d56f8dfe1..000000000000 --- a/include/asm-s390/sigp.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * include/asm-s390/sigp.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com) - * Heiko Carstens (heiko.carstens@de.ibm.com) - * - * sigp.h by D.J. Barrow (c) IBM 1999 - * contains routines / structures for signalling other S/390 processors in an - * SMP configuration. - */ - -#ifndef __SIGP__ -#define __SIGP__ - -#include -#include - -/* get real cpu address from logical cpu number */ -extern volatile int __cpu_logical_map[]; - -typedef enum -{ - sigp_unassigned=0x0, - sigp_sense, - sigp_external_call, - sigp_emergency_signal, - sigp_start, - sigp_stop, - sigp_restart, - sigp_unassigned1, - sigp_unassigned2, - sigp_stop_and_store_status, - sigp_unassigned3, - sigp_initial_cpu_reset, - sigp_cpu_reset, - sigp_set_prefix, - sigp_store_status_at_address, - sigp_store_extended_status_at_address -} sigp_order_code; - -typedef __u32 sigp_status_word; - -typedef enum -{ - sigp_order_code_accepted=0, - sigp_status_stored, - sigp_busy, - sigp_not_operational -} sigp_ccode; - - -/* - * Definitions for the external call - */ - -/* 'Bit' signals, asynchronous */ -typedef enum -{ - ec_schedule=0, - ec_call_function, - ec_bit_last -} ec_bit_sig; - -/* - * Signal processor - */ -static inline sigp_ccode -signal_processor(__u16 cpu_addr, sigp_order_code order_code) -{ - register unsigned long reg1 asm ("1") = 0; - sigp_ccode ccode; - - asm volatile( - " sigp %1,%2,0(%3)\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (ccode) - : "d" (reg1), "d" (__cpu_logical_map[cpu_addr]), - "a" (order_code) : "cc" , "memory"); - return ccode; -} - -/* - * Signal processor with parameter - */ -static inline sigp_ccode -signal_processor_p(__u32 parameter, __u16 cpu_addr, sigp_order_code order_code) -{ - register unsigned int reg1 asm ("1") = parameter; - sigp_ccode ccode; - - asm volatile( - " sigp %1,%2,0(%3)\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (ccode) - : "d" (reg1), "d" (__cpu_logical_map[cpu_addr]), - "a" (order_code) : "cc" , "memory"); - return ccode; -} - -/* - * Signal processor with parameter and return status - */ -static inline sigp_ccode -signal_processor_ps(__u32 *statusptr, __u32 parameter, __u16 cpu_addr, - sigp_order_code order_code) -{ - register unsigned int reg1 asm ("1") = parameter; - sigp_ccode ccode; - - asm volatile( - " sigp %1,%2,0(%3)\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (ccode), "+d" (reg1) - : "d" (__cpu_logical_map[cpu_addr]), "a" (order_code) - : "cc" , "memory"); - *statusptr = reg1; - return ccode; -} - -#endif /* __SIGP__ */ diff --git a/include/asm-s390/smp.h b/include/asm-s390/smp.h deleted file mode 100644 index ae89cf2478fc..000000000000 --- a/include/asm-s390/smp.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * include/asm-s390/smp.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com) - * Heiko Carstens (heiko.carstens@de.ibm.com) - */ -#ifndef __ASM_SMP_H -#define __ASM_SMP_H - -#include -#include -#include - -#if defined(__KERNEL__) && defined(CONFIG_SMP) && !defined(__ASSEMBLY__) - -#include -#include -#include -#include - -/* - s390 specific smp.c headers - */ -typedef struct -{ - int intresting; - sigp_ccode ccode; - __u32 status; - __u16 cpu; -} sigp_info; - -extern void machine_restart_smp(char *); -extern void machine_halt_smp(void); -extern void machine_power_off_smp(void); - -#define NO_PROC_ID 0xFF /* No processor magic marker */ - -/* - * This magic constant controls our willingness to transfer - * a process across CPUs. Such a transfer incurs misses on the L1 - * cache, and on a P6 or P5 with multiple L2 caches L2 hits. My - * gut feeling is this will vary by board in value. For a board - * with separate L2 cache it probably depends also on the RSS, and - * for a board with shared L2 cache it ought to decay fast as other - * processes are run. - */ - -#define PROC_CHANGE_PENALTY 20 /* Schedule penalty */ - -#define raw_smp_processor_id() (S390_lowcore.cpu_data.cpu_nr) - -static inline __u16 hard_smp_processor_id(void) -{ - return stap(); -} - -/* - * returns 1 if cpu is in stopped/check stopped state or not operational - * returns 0 otherwise - */ -static inline int -smp_cpu_not_running(int cpu) -{ - __u32 status; - - switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) { - case sigp_order_code_accepted: - case sigp_status_stored: - /* Check for stopped and check stop state */ - if (status & 0x50) - return 1; - break; - case sigp_not_operational: - return 1; - default: - break; - } - return 0; -} - -#define cpu_logical_map(cpu) (cpu) - -extern int __cpu_disable (void); -extern void __cpu_die (unsigned int cpu); -extern void cpu_die (void) __attribute__ ((noreturn)); -extern int __cpu_up (unsigned int cpu); - -extern struct mutex smp_cpu_state_mutex; -extern int smp_cpu_polarization[]; - -extern int smp_call_function_mask(cpumask_t mask, void (*func)(void *), - void *info, int wait); -#endif - -#ifndef CONFIG_SMP -static inline void smp_send_stop(void) -{ - /* Disable all interrupts/machine checks */ - __load_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK); -} - -#define hard_smp_processor_id() 0 -#define smp_cpu_not_running(cpu) 1 -#endif - -#ifdef CONFIG_HOTPLUG_CPU -extern int smp_rescan_cpus(void); -#else -static inline int smp_rescan_cpus(void) { return 0; } -#endif - -extern union save_area *zfcpdump_save_areas[NR_CPUS + 1]; -#endif diff --git a/include/asm-s390/socket.h b/include/asm-s390/socket.h deleted file mode 100644 index c786ab623b2d..000000000000 --- a/include/asm-s390/socket.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * include/asm-s390/socket.h - * - * S390 version - * - * Derived from "include/asm-i386/socket.h" - */ - -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#endif /* _ASM_SOCKET_H */ diff --git a/include/asm-s390/sockios.h b/include/asm-s390/sockios.h deleted file mode 100644 index f4fc16c7da59..000000000000 --- a/include/asm-s390/sockios.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-s390/sockios.h - * - * S390 version - * - * Derived from "include/asm-i386/sockios.h" - */ - -#ifndef __ARCH_S390_SOCKIOS__ -#define __ARCH_S390_SOCKIOS__ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif diff --git a/include/asm-s390/sparsemem.h b/include/asm-s390/sparsemem.h deleted file mode 100644 index 545d219e6a2d..000000000000 --- a/include/asm-s390/sparsemem.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _ASM_S390_SPARSEMEM_H -#define _ASM_S390_SPARSEMEM_H - -#ifdef CONFIG_64BIT - -#define SECTION_SIZE_BITS 28 -#define MAX_PHYSADDR_BITS 42 -#define MAX_PHYSMEM_BITS 42 - -#else - -#define SECTION_SIZE_BITS 25 -#define MAX_PHYSADDR_BITS 31 -#define MAX_PHYSMEM_BITS 31 - -#endif /* CONFIG_64BIT */ - -#endif /* _ASM_S390_SPARSEMEM_H */ diff --git a/include/asm-s390/spinlock.h b/include/asm-s390/spinlock.h deleted file mode 100644 index df84ae96915f..000000000000 --- a/include/asm-s390/spinlock.h +++ /dev/null @@ -1,178 +0,0 @@ -/* - * include/asm-s390/spinlock.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) - * - * Derived from "include/asm-i386/spinlock.h" - */ - -#ifndef __ASM_SPINLOCK_H -#define __ASM_SPINLOCK_H - -#include - -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - -static inline int -_raw_compare_and_swap(volatile unsigned int *lock, - unsigned int old, unsigned int new) -{ - asm volatile( - " cs %0,%3,%1" - : "=d" (old), "=Q" (*lock) - : "0" (old), "d" (new), "Q" (*lock) - : "cc", "memory" ); - return old; -} - -#else /* __GNUC__ */ - -static inline int -_raw_compare_and_swap(volatile unsigned int *lock, - unsigned int old, unsigned int new) -{ - asm volatile( - " cs %0,%3,0(%4)" - : "=d" (old), "=m" (*lock) - : "0" (old), "d" (new), "a" (lock), "m" (*lock) - : "cc", "memory" ); - return old; -} - -#endif /* __GNUC__ */ - -/* - * Simple spin lock operations. There are two variants, one clears IRQ's - * on the local processor, one does not. - * - * We make no fairness assumptions. They have a cost. - * - * (the type definitions are in asm/spinlock_types.h) - */ - -#define __raw_spin_is_locked(x) ((x)->owner_cpu != 0) -#define __raw_spin_unlock_wait(lock) \ - do { while (__raw_spin_is_locked(lock)) \ - _raw_spin_relax(lock); } while (0) - -extern void _raw_spin_lock_wait(raw_spinlock_t *); -extern void _raw_spin_lock_wait_flags(raw_spinlock_t *, unsigned long flags); -extern int _raw_spin_trylock_retry(raw_spinlock_t *); -extern void _raw_spin_relax(raw_spinlock_t *lock); - -static inline void __raw_spin_lock(raw_spinlock_t *lp) -{ - int old; - - old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id()); - if (likely(old == 0)) - return; - _raw_spin_lock_wait(lp); -} - -static inline void __raw_spin_lock_flags(raw_spinlock_t *lp, - unsigned long flags) -{ - int old; - - old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id()); - if (likely(old == 0)) - return; - _raw_spin_lock_wait_flags(lp, flags); -} - -static inline int __raw_spin_trylock(raw_spinlock_t *lp) -{ - int old; - - old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id()); - if (likely(old == 0)) - return 1; - return _raw_spin_trylock_retry(lp); -} - -static inline void __raw_spin_unlock(raw_spinlock_t *lp) -{ - _raw_compare_and_swap(&lp->owner_cpu, lp->owner_cpu, 0); -} - -/* - * Read-write spinlocks, allowing multiple readers - * but only one writer. - * - * NOTE! it is quite common to have readers in interrupts - * but no interrupt writers. For those circumstances we - * can "mix" irq-safe locks - any writer needs to get a - * irq-safe write-lock, but readers can get non-irqsafe - * read-locks. - */ - -/** - * read_can_lock - would read_trylock() succeed? - * @lock: the rwlock in question. - */ -#define __raw_read_can_lock(x) ((int)(x)->lock >= 0) - -/** - * write_can_lock - would write_trylock() succeed? - * @lock: the rwlock in question. - */ -#define __raw_write_can_lock(x) ((x)->lock == 0) - -extern void _raw_read_lock_wait(raw_rwlock_t *lp); -extern int _raw_read_trylock_retry(raw_rwlock_t *lp); -extern void _raw_write_lock_wait(raw_rwlock_t *lp); -extern int _raw_write_trylock_retry(raw_rwlock_t *lp); - -static inline void __raw_read_lock(raw_rwlock_t *rw) -{ - unsigned int old; - old = rw->lock & 0x7fffffffU; - if (_raw_compare_and_swap(&rw->lock, old, old + 1) != old) - _raw_read_lock_wait(rw); -} - -static inline void __raw_read_unlock(raw_rwlock_t *rw) -{ - unsigned int old, cmp; - - old = rw->lock; - do { - cmp = old; - old = _raw_compare_and_swap(&rw->lock, old, old - 1); - } while (cmp != old); -} - -static inline void __raw_write_lock(raw_rwlock_t *rw) -{ - if (unlikely(_raw_compare_and_swap(&rw->lock, 0, 0x80000000) != 0)) - _raw_write_lock_wait(rw); -} - -static inline void __raw_write_unlock(raw_rwlock_t *rw) -{ - _raw_compare_and_swap(&rw->lock, 0x80000000, 0); -} - -static inline int __raw_read_trylock(raw_rwlock_t *rw) -{ - unsigned int old; - old = rw->lock & 0x7fffffffU; - if (likely(_raw_compare_and_swap(&rw->lock, old, old + 1) == old)) - return 1; - return _raw_read_trylock_retry(rw); -} - -static inline int __raw_write_trylock(raw_rwlock_t *rw) -{ - if (likely(_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0)) - return 1; - return _raw_write_trylock_retry(rw); -} - -#define _raw_read_relax(lock) cpu_relax() -#define _raw_write_relax(lock) cpu_relax() - -#endif /* __ASM_SPINLOCK_H */ diff --git a/include/asm-s390/spinlock_types.h b/include/asm-s390/spinlock_types.h deleted file mode 100644 index 654abc40de04..000000000000 --- a/include/asm-s390/spinlock_types.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_SPINLOCK_TYPES_H -#define __ASM_SPINLOCK_TYPES_H - -#ifndef __LINUX_SPINLOCK_TYPES_H -# error "please don't include this file directly" -#endif - -typedef struct { - volatile unsigned int owner_cpu; -} __attribute__ ((aligned (4))) raw_spinlock_t; - -#define __RAW_SPIN_LOCK_UNLOCKED { 0 } - -typedef struct { - volatile unsigned int lock; -} raw_rwlock_t; - -#define __RAW_RW_LOCK_UNLOCKED { 0 } - -#endif diff --git a/include/asm-s390/stat.h b/include/asm-s390/stat.h deleted file mode 100644 index d92959eebb65..000000000000 --- a/include/asm-s390/stat.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * include/asm-s390/stat.h - * - * S390 version - * - * Derived from "include/asm-i386/stat.h" - */ - -#ifndef _S390_STAT_H -#define _S390_STAT_H - -#ifndef __s390x__ -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -struct stat { - unsigned short st_dev; - unsigned short __pad1; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned short __pad2; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned long long st_dev; - unsigned int __pad1; -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; - unsigned int st_mode; - unsigned int st_nlink; - unsigned long st_uid; - unsigned long st_gid; - unsigned long long st_rdev; - unsigned int __pad3; - long long st_size; - unsigned long st_blksize; - unsigned char __pad4[4]; - unsigned long __pad5; /* future possible st_blocks high bits */ - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ - unsigned long long st_ino; -}; - -#else /* __s390x__ */ - -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned long st_nlink; - unsigned int st_mode; - unsigned int st_uid; - unsigned int st_gid; - unsigned int __pad1; - unsigned long st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long st_blksize; - long st_blocks; - unsigned long __unused[3]; -}; - -#endif /* __s390x__ */ - -#define STAT_HAVE_NSEC 1 - -#endif diff --git a/include/asm-s390/statfs.h b/include/asm-s390/statfs.h deleted file mode 100644 index 099a45579190..000000000000 --- a/include/asm-s390/statfs.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * include/asm-s390/statfs.h - * - * S390 version - * - * Derived from "include/asm-i386/statfs.h" - */ - -#ifndef _S390_STATFS_H -#define _S390_STATFS_H - -#ifndef __s390x__ -#include -#else - -#ifndef __KERNEL_STRICT_NAMES - -#include - -typedef __kernel_fsid_t fsid_t; - -#endif - -/* - * This is ugly -- we're already 64-bit clean, so just duplicate the - * definitions. - */ -struct statfs { - int f_type; - int f_bsize; - long f_blocks; - long f_bfree; - long f_bavail; - long f_files; - long f_ffree; - __kernel_fsid_t f_fsid; - int f_namelen; - int f_frsize; - int f_spare[5]; -}; - -struct statfs64 { - int f_type; - int f_bsize; - long f_blocks; - long f_bfree; - long f_bavail; - long f_files; - long f_ffree; - __kernel_fsid_t f_fsid; - int f_namelen; - int f_frsize; - int f_spare[5]; -}; - -struct compat_statfs64 { - __u32 f_type; - __u32 f_bsize; - __u64 f_blocks; - __u64 f_bfree; - __u64 f_bavail; - __u64 f_files; - __u64 f_ffree; - __kernel_fsid_t f_fsid; - __u32 f_namelen; - __u32 f_frsize; - __u32 f_spare[5]; -}; - -#endif /* __s390x__ */ -#endif diff --git a/include/asm-s390/string.h b/include/asm-s390/string.h deleted file mode 100644 index d074673a6d9b..000000000000 --- a/include/asm-s390/string.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * include/asm-s390/string.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - */ - -#ifndef _S390_STRING_H_ -#define _S390_STRING_H_ - -#ifdef __KERNEL__ - -#ifndef _LINUX_TYPES_H -#include -#endif - -#define __HAVE_ARCH_MEMCHR /* inline & arch function */ -#define __HAVE_ARCH_MEMCMP /* arch function */ -#define __HAVE_ARCH_MEMCPY /* gcc builtin & arch function */ -#define __HAVE_ARCH_MEMSCAN /* inline & arch function */ -#define __HAVE_ARCH_MEMSET /* gcc builtin & arch function */ -#define __HAVE_ARCH_STRCAT /* inline & arch function */ -#define __HAVE_ARCH_STRCMP /* arch function */ -#define __HAVE_ARCH_STRCPY /* inline & arch function */ -#define __HAVE_ARCH_STRLCAT /* arch function */ -#define __HAVE_ARCH_STRLCPY /* arch function */ -#define __HAVE_ARCH_STRLEN /* inline & arch function */ -#define __HAVE_ARCH_STRNCAT /* arch function */ -#define __HAVE_ARCH_STRNCPY /* arch function */ -#define __HAVE_ARCH_STRNLEN /* inline & arch function */ -#define __HAVE_ARCH_STRRCHR /* arch function */ -#define __HAVE_ARCH_STRSTR /* arch function */ - -/* Prototypes for non-inlined arch strings functions. */ -extern int memcmp(const void *, const void *, size_t); -extern void *memcpy(void *, const void *, size_t); -extern void *memset(void *, int, size_t); -extern int strcmp(const char *,const char *); -extern size_t strlcat(char *, const char *, size_t); -extern size_t strlcpy(char *, const char *, size_t); -extern char *strncat(char *, const char *, size_t); -extern char *strncpy(char *, const char *, size_t); -extern char *strrchr(const char *, int); -extern char *strstr(const char *, const char *); - -#undef __HAVE_ARCH_MEMMOVE -#undef __HAVE_ARCH_STRCHR -#undef __HAVE_ARCH_STRNCHR -#undef __HAVE_ARCH_STRNCMP -#undef __HAVE_ARCH_STRNICMP -#undef __HAVE_ARCH_STRPBRK -#undef __HAVE_ARCH_STRSEP -#undef __HAVE_ARCH_STRSPN - -#if !defined(IN_ARCH_STRING_C) - -static inline void *memchr(const void * s, int c, size_t n) -{ - register int r0 asm("0") = (char) c; - const void *ret = s + n; - - asm volatile( - "0: srst %0,%1\n" - " jo 0b\n" - " jl 1f\n" - " la %0,0\n" - "1:" - : "+a" (ret), "+&a" (s) : "d" (r0) : "cc"); - return (void *) ret; -} - -static inline void *memscan(void *s, int c, size_t n) -{ - register int r0 asm("0") = (char) c; - const void *ret = s + n; - - asm volatile( - "0: srst %0,%1\n" - " jo 0b\n" - : "+a" (ret), "+&a" (s) : "d" (r0) : "cc"); - return (void *) ret; -} - -static inline char *strcat(char *dst, const char *src) -{ - register int r0 asm("0") = 0; - unsigned long dummy; - char *ret = dst; - - asm volatile( - "0: srst %0,%1\n" - " jo 0b\n" - "1: mvst %0,%2\n" - " jo 1b" - : "=&a" (dummy), "+a" (dst), "+a" (src) - : "d" (r0), "0" (0) : "cc", "memory" ); - return ret; -} - -static inline char *strcpy(char *dst, const char *src) -{ - register int r0 asm("0") = 0; - char *ret = dst; - - asm volatile( - "0: mvst %0,%1\n" - " jo 0b" - : "+&a" (dst), "+&a" (src) : "d" (r0) - : "cc", "memory"); - return ret; -} - -static inline size_t strlen(const char *s) -{ - register unsigned long r0 asm("0") = 0; - const char *tmp = s; - - asm volatile( - "0: srst %0,%1\n" - " jo 0b" - : "+d" (r0), "+a" (tmp) : : "cc"); - return r0 - (unsigned long) s; -} - -static inline size_t strnlen(const char * s, size_t n) -{ - register int r0 asm("0") = 0; - const char *tmp = s; - const char *end = s + n; - - asm volatile( - "0: srst %0,%1\n" - " jo 0b" - : "+a" (end), "+a" (tmp) : "d" (r0) : "cc"); - return end - s; -} - -#endif /* !IN_ARCH_STRING_C */ - -#endif /* __KERNEL__ */ - -#endif /* __S390_STRING_H_ */ diff --git a/include/asm-s390/suspend.h b/include/asm-s390/suspend.h deleted file mode 100644 index 1f34580e67a7..000000000000 --- a/include/asm-s390/suspend.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifndef __ASM_S390_SUSPEND_H -#define __ASM_S390_SUSPEND_H - -#endif - diff --git a/include/asm-s390/sysinfo.h b/include/asm-s390/sysinfo.h deleted file mode 100644 index 79d01343f8b0..000000000000 --- a/include/asm-s390/sysinfo.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * definition for store system information stsi - * - * Copyright IBM Corp. 2001,2008 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License (version 2 only) - * as published by the Free Software Foundation. - * - * Author(s): Ulrich Weigand - * Christian Borntraeger - */ - -#ifndef __ASM_S390_SYSINFO_H -#define __ASM_S390_SYSINFO_H - -struct sysinfo_1_1_1 { - char reserved_0[32]; - char manufacturer[16]; - char type[4]; - char reserved_1[12]; - char model_capacity[16]; - char sequence[16]; - char plant[4]; - char model[16]; - char model_perm_cap[16]; - char model_temp_cap[16]; - char model_cap_rating[4]; - char model_perm_cap_rating[4]; - char model_temp_cap_rating[4]; -}; - -struct sysinfo_1_2_1 { - char reserved_0[80]; - char sequence[16]; - char plant[4]; - char reserved_1[2]; - unsigned short cpu_address; -}; - -struct sysinfo_1_2_2 { - char format; - char reserved_0[1]; - unsigned short acc_offset; - char reserved_1[24]; - unsigned int secondary_capability; - unsigned int capability; - unsigned short cpus_total; - unsigned short cpus_configured; - unsigned short cpus_standby; - unsigned short cpus_reserved; - unsigned short adjustment[0]; -}; - -struct sysinfo_1_2_2_extension { - unsigned int alt_capability; - unsigned short alt_adjustment[0]; -}; - -struct sysinfo_2_2_1 { - char reserved_0[80]; - char sequence[16]; - char plant[4]; - unsigned short cpu_id; - unsigned short cpu_address; -}; - -struct sysinfo_2_2_2 { - char reserved_0[32]; - unsigned short lpar_number; - char reserved_1; - unsigned char characteristics; - unsigned short cpus_total; - unsigned short cpus_configured; - unsigned short cpus_standby; - unsigned short cpus_reserved; - char name[8]; - unsigned int caf; - char reserved_2[16]; - unsigned short cpus_dedicated; - unsigned short cpus_shared; -}; - -#define LPAR_CHAR_DEDICATED (1 << 7) -#define LPAR_CHAR_SHARED (1 << 6) -#define LPAR_CHAR_LIMITED (1 << 5) - -struct sysinfo_3_2_2 { - char reserved_0[31]; - unsigned char count; - struct { - char reserved_0[4]; - unsigned short cpus_total; - unsigned short cpus_configured; - unsigned short cpus_standby; - unsigned short cpus_reserved; - char name[8]; - unsigned int caf; - char cpi[16]; - char reserved_1[24]; - - } vm[8]; -}; - -static inline int stsi(void *sysinfo, int fc, int sel1, int sel2) -{ - register int r0 asm("0") = (fc << 28) | sel1; - register int r1 asm("1") = sel2; - - asm volatile( - " stsi 0(%2)\n" - "0: jz 2f\n" - "1: lhi %0,%3\n" - "2:\n" - EX_TABLE(0b, 1b) - : "+d" (r0) : "d" (r1), "a" (sysinfo), "K" (-ENOSYS) - : "cc", "memory"); - return r0; -} - -#endif /* __ASM_S390_SYSINFO_H */ diff --git a/include/asm-s390/system.h b/include/asm-s390/system.h deleted file mode 100644 index 819e7d99ca0c..000000000000 --- a/include/asm-s390/system.h +++ /dev/null @@ -1,462 +0,0 @@ -/* - * include/asm-s390/system.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - * - * Derived from "include/asm-i386/system.h" - */ - -#ifndef __ASM_SYSTEM_H -#define __ASM_SYSTEM_H - -#include -#include -#include -#include -#include -#include - -#ifdef __KERNEL__ - -struct task_struct; - -extern struct task_struct *__switch_to(void *, void *); - -static inline void save_fp_regs(s390_fp_regs *fpregs) -{ - asm volatile( - " std 0,8(%1)\n" - " std 2,24(%1)\n" - " std 4,40(%1)\n" - " std 6,56(%1)" - : "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory"); - if (!MACHINE_HAS_IEEE) - return; - asm volatile( - " stfpc 0(%1)\n" - " std 1,16(%1)\n" - " std 3,32(%1)\n" - " std 5,48(%1)\n" - " std 7,64(%1)\n" - " std 8,72(%1)\n" - " std 9,80(%1)\n" - " std 10,88(%1)\n" - " std 11,96(%1)\n" - " std 12,104(%1)\n" - " std 13,112(%1)\n" - " std 14,120(%1)\n" - " std 15,128(%1)\n" - : "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory"); -} - -static inline void restore_fp_regs(s390_fp_regs *fpregs) -{ - asm volatile( - " ld 0,8(%0)\n" - " ld 2,24(%0)\n" - " ld 4,40(%0)\n" - " ld 6,56(%0)" - : : "a" (fpregs), "m" (*fpregs)); - if (!MACHINE_HAS_IEEE) - return; - asm volatile( - " lfpc 0(%0)\n" - " ld 1,16(%0)\n" - " ld 3,32(%0)\n" - " ld 5,48(%0)\n" - " ld 7,64(%0)\n" - " ld 8,72(%0)\n" - " ld 9,80(%0)\n" - " ld 10,88(%0)\n" - " ld 11,96(%0)\n" - " ld 12,104(%0)\n" - " ld 13,112(%0)\n" - " ld 14,120(%0)\n" - " ld 15,128(%0)\n" - : : "a" (fpregs), "m" (*fpregs)); -} - -static inline void save_access_regs(unsigned int *acrs) -{ - asm volatile("stam 0,15,0(%0)" : : "a" (acrs) : "memory"); -} - -static inline void restore_access_regs(unsigned int *acrs) -{ - asm volatile("lam 0,15,0(%0)" : : "a" (acrs)); -} - -#define switch_to(prev,next,last) do { \ - if (prev == next) \ - break; \ - save_fp_regs(&prev->thread.fp_regs); \ - restore_fp_regs(&next->thread.fp_regs); \ - save_access_regs(&prev->thread.acrs[0]); \ - restore_access_regs(&next->thread.acrs[0]); \ - prev = __switch_to(prev,next); \ -} while (0) - -#ifdef CONFIG_VIRT_CPU_ACCOUNTING -extern void account_vtime(struct task_struct *); -extern void account_tick_vtime(struct task_struct *); -extern void account_system_vtime(struct task_struct *); -#else -#define account_vtime(x) do { /* empty */ } while (0) -#endif - -#ifdef CONFIG_PFAULT -extern void pfault_irq_init(void); -extern int pfault_init(void); -extern void pfault_fini(void); -#else /* CONFIG_PFAULT */ -#define pfault_irq_init() do { } while (0) -#define pfault_init() ({-1;}) -#define pfault_fini() do { } while (0) -#endif /* CONFIG_PFAULT */ - -#ifdef CONFIG_PAGE_STATES -extern void cmma_init(void); -#else -static inline void cmma_init(void) { } -#endif - -#define finish_arch_switch(prev) do { \ - set_fs(current->thread.mm_segment); \ - account_vtime(prev); \ -} while (0) - -#define nop() asm volatile("nop") - -#define xchg(ptr,x) \ -({ \ - __typeof__(*(ptr)) __ret; \ - __ret = (__typeof__(*(ptr))) \ - __xchg((unsigned long)(x), (void *)(ptr),sizeof(*(ptr))); \ - __ret; \ -}) - -extern void __xchg_called_with_bad_pointer(void); - -static inline unsigned long __xchg(unsigned long x, void * ptr, int size) -{ - unsigned long addr, old; - int shift; - - switch (size) { - case 1: - addr = (unsigned long) ptr; - shift = (3 ^ (addr & 3)) << 3; - addr ^= addr & 3; - asm volatile( - " l %0,0(%4)\n" - "0: lr 0,%0\n" - " nr 0,%3\n" - " or 0,%2\n" - " cs %0,0,0(%4)\n" - " jl 0b\n" - : "=&d" (old), "=m" (*(int *) addr) - : "d" (x << shift), "d" (~(255 << shift)), "a" (addr), - "m" (*(int *) addr) : "memory", "cc", "0"); - return old >> shift; - case 2: - addr = (unsigned long) ptr; - shift = (2 ^ (addr & 2)) << 3; - addr ^= addr & 2; - asm volatile( - " l %0,0(%4)\n" - "0: lr 0,%0\n" - " nr 0,%3\n" - " or 0,%2\n" - " cs %0,0,0(%4)\n" - " jl 0b\n" - : "=&d" (old), "=m" (*(int *) addr) - : "d" (x << shift), "d" (~(65535 << shift)), "a" (addr), - "m" (*(int *) addr) : "memory", "cc", "0"); - return old >> shift; - case 4: - asm volatile( - " l %0,0(%3)\n" - "0: cs %0,%2,0(%3)\n" - " jl 0b\n" - : "=&d" (old), "=m" (*(int *) ptr) - : "d" (x), "a" (ptr), "m" (*(int *) ptr) - : "memory", "cc"); - return old; -#ifdef __s390x__ - case 8: - asm volatile( - " lg %0,0(%3)\n" - "0: csg %0,%2,0(%3)\n" - " jl 0b\n" - : "=&d" (old), "=m" (*(long *) ptr) - : "d" (x), "a" (ptr), "m" (*(long *) ptr) - : "memory", "cc"); - return old; -#endif /* __s390x__ */ - } - __xchg_called_with_bad_pointer(); - return x; -} - -/* - * Atomic compare and exchange. Compare OLD with MEM, if identical, - * store NEW in MEM. Return the initial value in MEM. Success is - * indicated by comparing RETURN with OLD. - */ - -#define __HAVE_ARCH_CMPXCHG 1 - -#define cmpxchg(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \ - (unsigned long)(n), sizeof(*(ptr)))) - -extern void __cmpxchg_called_with_bad_pointer(void); - -static inline unsigned long -__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) -{ - unsigned long addr, prev, tmp; - int shift; - - switch (size) { - case 1: - addr = (unsigned long) ptr; - shift = (3 ^ (addr & 3)) << 3; - addr ^= addr & 3; - asm volatile( - " l %0,0(%4)\n" - "0: nr %0,%5\n" - " lr %1,%0\n" - " or %0,%2\n" - " or %1,%3\n" - " cs %0,%1,0(%4)\n" - " jnl 1f\n" - " xr %1,%0\n" - " nr %1,%5\n" - " jnz 0b\n" - "1:" - : "=&d" (prev), "=&d" (tmp) - : "d" (old << shift), "d" (new << shift), "a" (ptr), - "d" (~(255 << shift)) - : "memory", "cc"); - return prev >> shift; - case 2: - addr = (unsigned long) ptr; - shift = (2 ^ (addr & 2)) << 3; - addr ^= addr & 2; - asm volatile( - " l %0,0(%4)\n" - "0: nr %0,%5\n" - " lr %1,%0\n" - " or %0,%2\n" - " or %1,%3\n" - " cs %0,%1,0(%4)\n" - " jnl 1f\n" - " xr %1,%0\n" - " nr %1,%5\n" - " jnz 0b\n" - "1:" - : "=&d" (prev), "=&d" (tmp) - : "d" (old << shift), "d" (new << shift), "a" (ptr), - "d" (~(65535 << shift)) - : "memory", "cc"); - return prev >> shift; - case 4: - asm volatile( - " cs %0,%2,0(%3)\n" - : "=&d" (prev) : "0" (old), "d" (new), "a" (ptr) - : "memory", "cc"); - return prev; -#ifdef __s390x__ - case 8: - asm volatile( - " csg %0,%2,0(%3)\n" - : "=&d" (prev) : "0" (old), "d" (new), "a" (ptr) - : "memory", "cc"); - return prev; -#endif /* __s390x__ */ - } - __cmpxchg_called_with_bad_pointer(); - return old; -} - -/* - * Force strict CPU ordering. - * And yes, this is required on UP too when we're talking - * to devices. - * - * This is very similar to the ppc eieio/sync instruction in that is - * does a checkpoint syncronisation & makes sure that - * all memory ops have completed wrt other CPU's ( see 7-15 POP DJB ). - */ - -#define eieio() asm volatile("bcr 15,0" : : : "memory") -#define SYNC_OTHER_CORES(x) eieio() -#define mb() eieio() -#define rmb() eieio() -#define wmb() eieio() -#define read_barrier_depends() do { } while(0) -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() - - -#define set_mb(var, value) do { var = value; mb(); } while (0) - -#ifdef __s390x__ - -#define __ctl_load(array, low, high) ({ \ - typedef struct { char _[sizeof(array)]; } addrtype; \ - asm volatile( \ - " lctlg %1,%2,0(%0)\n" \ - : : "a" (&array), "i" (low), "i" (high), \ - "m" (*(addrtype *)(&array))); \ - }) - -#define __ctl_store(array, low, high) ({ \ - typedef struct { char _[sizeof(array)]; } addrtype; \ - asm volatile( \ - " stctg %2,%3,0(%1)\n" \ - : "=m" (*(addrtype *)(&array)) \ - : "a" (&array), "i" (low), "i" (high)); \ - }) - -#else /* __s390x__ */ - -#define __ctl_load(array, low, high) ({ \ - typedef struct { char _[sizeof(array)]; } addrtype; \ - asm volatile( \ - " lctl %1,%2,0(%0)\n" \ - : : "a" (&array), "i" (low), "i" (high), \ - "m" (*(addrtype *)(&array))); \ -}) - -#define __ctl_store(array, low, high) ({ \ - typedef struct { char _[sizeof(array)]; } addrtype; \ - asm volatile( \ - " stctl %2,%3,0(%1)\n" \ - : "=m" (*(addrtype *)(&array)) \ - : "a" (&array), "i" (low), "i" (high)); \ - }) - -#endif /* __s390x__ */ - -#define __ctl_set_bit(cr, bit) ({ \ - unsigned long __dummy; \ - __ctl_store(__dummy, cr, cr); \ - __dummy |= 1UL << (bit); \ - __ctl_load(__dummy, cr, cr); \ -}) - -#define __ctl_clear_bit(cr, bit) ({ \ - unsigned long __dummy; \ - __ctl_store(__dummy, cr, cr); \ - __dummy &= ~(1UL << (bit)); \ - __ctl_load(__dummy, cr, cr); \ -}) - -#include - -#include - -static inline unsigned long __cmpxchg_local(volatile void *ptr, - unsigned long old, - unsigned long new, int size) -{ - switch (size) { - case 1: - case 2: - case 4: -#ifdef __s390x__ - case 8: -#endif - return __cmpxchg(ptr, old, new, size); - default: - return __cmpxchg_local_generic(ptr, old, new, size); - } - - return old; -} - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \ - (unsigned long)(n), sizeof(*(ptr)))) -#ifdef __s390x__ -#define cmpxchg64_local(ptr, o, n) \ - ({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ - cmpxchg_local((ptr), (o), (n)); \ - }) -#else -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) -#endif - -/* - * Use to set psw mask except for the first byte which - * won't be changed by this function. - */ -static inline void -__set_psw_mask(unsigned long mask) -{ - __load_psw_mask(mask | (__raw_local_irq_stosm(0x00) & ~(-1UL >> 8))); -} - -#define local_mcck_enable() __set_psw_mask(psw_kernel_bits) -#define local_mcck_disable() __set_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK) - -int stfle(unsigned long long *list, int doublewords); - -#ifdef CONFIG_SMP - -extern void smp_ctl_set_bit(int cr, int bit); -extern void smp_ctl_clear_bit(int cr, int bit); -#define ctl_set_bit(cr, bit) smp_ctl_set_bit(cr, bit) -#define ctl_clear_bit(cr, bit) smp_ctl_clear_bit(cr, bit) - -#else - -#define ctl_set_bit(cr, bit) __ctl_set_bit(cr, bit) -#define ctl_clear_bit(cr, bit) __ctl_clear_bit(cr, bit) - -#endif /* CONFIG_SMP */ - -static inline unsigned int stfl(void) -{ - asm volatile( - " .insn s,0xb2b10000,0(0)\n" /* stfl */ - "0:\n" - EX_TABLE(0b,0b)); - return S390_lowcore.stfl_fac_list; -} - -static inline unsigned short stap(void) -{ - unsigned short cpu_address; - - asm volatile("stap %0" : "=m" (cpu_address)); - return cpu_address; -} - -extern void (*_machine_restart)(char *command); -extern void (*_machine_halt)(void); -extern void (*_machine_power_off)(void); - -#define arch_align_stack(x) (x) - -#ifdef CONFIG_TRACE_IRQFLAGS -extern psw_t sysc_restore_trace_psw; -extern psw_t io_restore_trace_psw; -#endif - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-s390/tape390.h b/include/asm-s390/tape390.h deleted file mode 100644 index 884fba48f1ff..000000000000 --- a/include/asm-s390/tape390.h +++ /dev/null @@ -1,103 +0,0 @@ -/************************************************************************* - * - * tape390.h - * enables user programs to display messages and control encryption - * on s390 tape devices - * - * Copyright IBM Corp. 2001,2006 - * Author(s): Michael Holzheu - * - *************************************************************************/ - -#ifndef _TAPE390_H -#define _TAPE390_H - -#define TAPE390_DISPLAY _IOW('d', 1, struct display_struct) - -/* - * The TAPE390_DISPLAY ioctl calls the Load Display command - * which transfers 17 bytes of data from the channel to the subsystem: - * - 1 format control byte, and - * - two 8-byte messages - * - * Format control byte: - * 0-2: New Message Overlay - * 3: Alternate Messages - * 4: Blink Message - * 5: Display Low/High Message - * 6: Reserved - * 7: Automatic Load Request - * - */ - -typedef struct display_struct { - char cntrl; - char message1[8]; - char message2[8]; -} display_struct; - -/* - * Tape encryption support - */ - -struct tape390_crypt_info { - char capability; - char status; - char medium_status; -} __attribute__ ((packed)); - - -/* Macros for "capable" field */ -#define TAPE390_CRYPT_SUPPORTED_MASK 0x01 -#define TAPE390_CRYPT_SUPPORTED(x) \ - ((x.capability & TAPE390_CRYPT_SUPPORTED_MASK)) - -/* Macros for "status" field */ -#define TAPE390_CRYPT_ON_MASK 0x01 -#define TAPE390_CRYPT_ON(x) (((x.status) & TAPE390_CRYPT_ON_MASK)) - -/* Macros for "medium status" field */ -#define TAPE390_MEDIUM_LOADED_MASK 0x01 -#define TAPE390_MEDIUM_ENCRYPTED_MASK 0x02 -#define TAPE390_MEDIUM_ENCRYPTED(x) \ - (((x.medium_status) & TAPE390_MEDIUM_ENCRYPTED_MASK)) -#define TAPE390_MEDIUM_LOADED(x) \ - (((x.medium_status) & TAPE390_MEDIUM_LOADED_MASK)) - -/* - * The TAPE390_CRYPT_SET ioctl is used to switch on/off encryption. - * The "encryption_capable" and "tape_status" fields are ignored for this ioctl! - */ -#define TAPE390_CRYPT_SET _IOW('d', 2, struct tape390_crypt_info) - -/* - * The TAPE390_CRYPT_QUERY ioctl is used to query the encryption state. - */ -#define TAPE390_CRYPT_QUERY _IOR('d', 3, struct tape390_crypt_info) - -/* Values for "kekl1/2_type" and "kekl1/2_type_on_tape" fields */ -#define TAPE390_KEKL_TYPE_NONE 0 -#define TAPE390_KEKL_TYPE_LABEL 1 -#define TAPE390_KEKL_TYPE_HASH 2 - -struct tape390_kekl { - unsigned char type; - unsigned char type_on_tape; - char label[65]; -} __attribute__ ((packed)); - -struct tape390_kekl_pair { - struct tape390_kekl kekl[2]; -} __attribute__ ((packed)); - -/* - * The TAPE390_KEKL_SET ioctl is used to set Key Encrypting Key labels. - */ -#define TAPE390_KEKL_SET _IOW('d', 4, struct tape390_kekl_pair) - -/* - * The TAPE390_KEKL_QUERY ioctl is used to query Key Encrypting Key labels. - */ -#define TAPE390_KEKL_QUERY _IOR('d', 5, struct tape390_kekl_pair) - -#endif diff --git a/include/asm-s390/termbits.h b/include/asm-s390/termbits.h deleted file mode 100644 index 58731853d529..000000000000 --- a/include/asm-s390/termbits.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - * include/asm-s390/termbits.h - * - * S390 version - * - * Derived from "include/asm-i386/termbits.h" - */ - -#ifndef __ARCH_S390_TERMBITS_H__ -#define __ARCH_S390_TERMBITS_H__ - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif diff --git a/include/asm-s390/termios.h b/include/asm-s390/termios.h deleted file mode 100644 index 67f66278f533..000000000000 --- a/include/asm-s390/termios.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * include/asm-s390/termios.h - * - * S390 version - * - * Derived from "include/asm-i386/termios.h" - */ - -#ifndef _S390_TERMIOS_H -#define _S390_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) - -#include - -#endif /* __KERNEL__ */ - -#endif /* _S390_TERMIOS_H */ diff --git a/include/asm-s390/thread_info.h b/include/asm-s390/thread_info.h deleted file mode 100644 index 91a8f93ad355..000000000000 --- a/include/asm-s390/thread_info.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - * include/asm-s390/thread_info.h - * - * S390 version - * Copyright (C) IBM Corp. 2002,2006 - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ - -/* - * Size of kernel stack for each process - */ -#ifndef __s390x__ -#ifndef __SMALL_STACK -#define THREAD_ORDER 1 -#define ASYNC_ORDER 1 -#else -#define THREAD_ORDER 0 -#define ASYNC_ORDER 0 -#endif -#else /* __s390x__ */ -#ifndef __SMALL_STACK -#define THREAD_ORDER 2 -#define ASYNC_ORDER 2 -#else -#define THREAD_ORDER 1 -#define ASYNC_ORDER 1 -#endif -#endif /* __s390x__ */ - -#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER) -#define ASYNC_SIZE (PAGE_SIZE << ASYNC_ORDER) - -#ifndef __ASSEMBLY__ -#include -#include - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, the assembly constants must also be changed - */ -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - unsigned int cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, <0 => BUG */ - struct restart_block restart_block; -}; - -/* - * macros/functions for gaining access to the thread information structure - */ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - return (struct thread_info *)((*(unsigned long *) __LC_KERNEL_STACK)-THREAD_SIZE); -} - -#define THREAD_SIZE_ORDER THREAD_ORDER - -#endif - -/* - * thread information flags bit numbers - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 2 /* signal pending */ -#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_RESTART_SVC 4 /* restart svc with new svc number */ -#define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */ -#define TIF_SINGLE_STEP 6 /* deliver sigtrap on return to user */ -#define TIF_MCCK_PENDING 7 /* machine check handling is pending */ -#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ -#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling - TIF_NEED_RESCHED */ -#define TIF_31BIT 18 /* 32bit process */ -#define TIF_MEMDIE 19 -#define TIF_RESTORE_SIGMASK 20 /* restore signal mask in do_signal() */ - -#define _TIF_SYSCALL_TRACE (1< - -#define VTIMER_MAX_SLICE (0x7ffffffffffff000LL) - -struct vtimer_list { - struct list_head entry; - - int cpu; - __u64 expires; - __u64 interval; - - spinlock_t lock; - unsigned long magic; - - void (*function)(unsigned long); - unsigned long data; -}; - -/* the offset value will wrap after ca. 71 years */ -struct vtimer_queue { - struct list_head list; - spinlock_t lock; - __u64 to_expire; /* current event expire time */ - __u64 offset; /* list offset to zero */ - __u64 idle; /* temp var for idle */ -}; - -extern void init_virt_timer(struct vtimer_list *timer); -extern void add_virt_timer(void *new); -extern void add_virt_timer_periodic(void *new); -extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires); -extern int del_virt_timer(struct vtimer_list *timer); - -extern void init_cpu_vtimer(void); -extern void vtime_init(void); - -#ifdef CONFIG_VIRT_TIMER - -extern void vtime_start_cpu_timer(void); -extern void vtime_stop_cpu_timer(void); - -#else - -static inline void vtime_start_cpu_timer(void) { } -static inline void vtime_stop_cpu_timer(void) { } - -#endif /* CONFIG_VIRT_TIMER */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_S390_TIMER_H */ diff --git a/include/asm-s390/timex.h b/include/asm-s390/timex.h deleted file mode 100644 index d744c3d62de5..000000000000 --- a/include/asm-s390/timex.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * include/asm-s390/timex.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * - * Derived from "include/asm-i386/timex.h" - * Copyright (C) 1992, Linus Torvalds - */ - -#ifndef _ASM_S390_TIMEX_H -#define _ASM_S390_TIMEX_H - -/* Inline functions for clock register access. */ -static inline int set_clock(__u64 time) -{ - int cc; - - asm volatile( - " sck 0(%2)\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (cc) : "m" (time), "a" (&time) : "cc"); - return cc; -} - -static inline int store_clock(__u64 *time) -{ - int cc; - - asm volatile( - " stck 0(%2)\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (cc), "=m" (*time) : "a" (time) : "cc"); - return cc; -} - -static inline void set_clock_comparator(__u64 time) -{ - asm volatile("sckc 0(%1)" : : "m" (time), "a" (&time)); -} - -static inline void store_clock_comparator(__u64 *time) -{ - asm volatile("stckc 0(%1)" : "=m" (*time) : "a" (time)); -} - -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ - -typedef unsigned long long cycles_t; - -static inline unsigned long long get_clock (void) -{ - unsigned long long clk; - -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - asm volatile("stck %0" : "=Q" (clk) : : "cc"); -#else /* __GNUC__ */ - asm volatile("stck 0(%1)" : "=m" (clk) : "a" (&clk) : "cc"); -#endif /* __GNUC__ */ - return clk; -} - -static inline unsigned long long get_clock_xt(void) -{ - unsigned char clk[16]; - -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - asm volatile("stcke %0" : "=Q" (clk) : : "cc"); -#else /* __GNUC__ */ - asm volatile("stcke 0(%1)" : "=m" (clk) - : "a" (clk) : "cc"); -#endif /* __GNUC__ */ - - return *((unsigned long long *)&clk[1]); -} - -static inline cycles_t get_cycles(void) -{ - return (cycles_t) get_clock() >> 2; -} - -int get_sync_clock(unsigned long long *clock); -void init_cpu_timer(void); -unsigned long long monotonic_clock(void); - -#endif diff --git a/include/asm-s390/tlb.h b/include/asm-s390/tlb.h deleted file mode 100644 index 3d8a96d39d9d..000000000000 --- a/include/asm-s390/tlb.h +++ /dev/null @@ -1,156 +0,0 @@ -#ifndef _S390_TLB_H -#define _S390_TLB_H - -/* - * TLB flushing on s390 is complicated. The following requirement - * from the principles of operation is the most arduous: - * - * "A valid table entry must not be changed while it is attached - * to any CPU and may be used for translation by that CPU except to - * (1) invalidate the entry by using INVALIDATE PAGE TABLE ENTRY, - * or INVALIDATE DAT TABLE ENTRY, (2) alter bits 56-63 of a page - * table entry, or (3) make a change by means of a COMPARE AND SWAP - * AND PURGE instruction that purges the TLB." - * - * The modification of a pte of an active mm struct therefore is - * a two step process: i) invalidate the pte, ii) store the new pte. - * This is true for the page protection bit as well. - * The only possible optimization is to flush at the beginning of - * a tlb_gather_mmu cycle if the mm_struct is currently not in use. - * - * Pages used for the page tables is a different story. FIXME: more - */ - -#include -#include -#include -#include -#include -#include - -#ifndef CONFIG_SMP -#define TLB_NR_PTRS 1 -#else -#define TLB_NR_PTRS 508 -#endif - -struct mmu_gather { - struct mm_struct *mm; - unsigned int fullmm; - unsigned int nr_ptes; - unsigned int nr_pxds; - void *array[TLB_NR_PTRS]; -}; - -DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); - -static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm, - unsigned int full_mm_flush) -{ - struct mmu_gather *tlb = &get_cpu_var(mmu_gathers); - - tlb->mm = mm; - tlb->fullmm = full_mm_flush || (num_online_cpus() == 1) || - (atomic_read(&mm->mm_users) <= 1 && mm == current->active_mm); - tlb->nr_ptes = 0; - tlb->nr_pxds = TLB_NR_PTRS; - if (tlb->fullmm) - __tlb_flush_mm(mm); - return tlb; -} - -static inline void tlb_flush_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) -{ - if (!tlb->fullmm && (tlb->nr_ptes > 0 || tlb->nr_pxds < TLB_NR_PTRS)) - __tlb_flush_mm(tlb->mm); - while (tlb->nr_ptes > 0) - pte_free(tlb->mm, tlb->array[--tlb->nr_ptes]); - while (tlb->nr_pxds < TLB_NR_PTRS) - /* pgd_free frees the pointer as region or segment table */ - pgd_free(tlb->mm, tlb->array[tlb->nr_pxds++]); -} - -static inline void tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) -{ - tlb_flush_mmu(tlb, start, end); - - /* keep the page table cache within bounds */ - check_pgt_cache(); - - put_cpu_var(mmu_gathers); -} - -/* - * Release the page cache reference for a pte removed by - * tlb_ptep_clear_flush. In both flush modes the tlb fo a page cache page - * has already been freed, so just do free_page_and_swap_cache. - */ -static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) -{ - free_page_and_swap_cache(page); -} - -/* - * pte_free_tlb frees a pte table and clears the CRSTE for the - * page table from the tlb. - */ -static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte) -{ - if (!tlb->fullmm) { - tlb->array[tlb->nr_ptes++] = pte; - if (tlb->nr_ptes >= tlb->nr_pxds) - tlb_flush_mmu(tlb, 0, 0); - } else - pte_free(tlb->mm, pte); -} - -/* - * pmd_free_tlb frees a pmd table and clears the CRSTE for the - * segment table entry from the tlb. - * If the mm uses a two level page table the single pmd is freed - * as the pgd. pmd_free_tlb checks the asce_limit against 2GB - * to avoid the double free of the pmd in this case. - */ -static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) -{ -#ifdef __s390x__ - if (tlb->mm->context.asce_limit <= (1UL << 31)) - return; - if (!tlb->fullmm) { - tlb->array[--tlb->nr_pxds] = pmd; - if (tlb->nr_ptes >= tlb->nr_pxds) - tlb_flush_mmu(tlb, 0, 0); - } else - pmd_free(tlb->mm, pmd); -#endif -} - -/* - * pud_free_tlb frees a pud table and clears the CRSTE for the - * region third table entry from the tlb. - * If the mm uses a three level page table the single pud is freed - * as the pgd. pud_free_tlb checks the asce_limit against 4TB - * to avoid the double free of the pud in this case. - */ -static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud) -{ -#ifdef __s390x__ - if (tlb->mm->context.asce_limit <= (1UL << 42)) - return; - if (!tlb->fullmm) { - tlb->array[--tlb->nr_pxds] = pud; - if (tlb->nr_ptes >= tlb->nr_pxds) - tlb_flush_mmu(tlb, 0, 0); - } else - pud_free(tlb->mm, pud); -#endif -} - -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) -#define tlb_remove_tlb_entry(tlb, ptep, addr) do { } while (0) -#define tlb_migrate_finish(mm) do { } while (0) - -#endif /* _S390_TLB_H */ diff --git a/include/asm-s390/tlbflush.h b/include/asm-s390/tlbflush.h deleted file mode 100644 index d60394b9745e..000000000000 --- a/include/asm-s390/tlbflush.h +++ /dev/null @@ -1,140 +0,0 @@ -#ifndef _S390_TLBFLUSH_H -#define _S390_TLBFLUSH_H - -#include -#include -#include -#include - -/* - * Flush all tlb entries on the local cpu. - */ -static inline void __tlb_flush_local(void) -{ - asm volatile("ptlb" : : : "memory"); -} - -#ifdef CONFIG_SMP -/* - * Flush all tlb entries on all cpus. - */ -void smp_ptlb_all(void); - -static inline void __tlb_flush_global(void) -{ - register unsigned long reg2 asm("2"); - register unsigned long reg3 asm("3"); - register unsigned long reg4 asm("4"); - long dummy; - -#ifndef __s390x__ - if (!MACHINE_HAS_CSP) { - smp_ptlb_all(); - return; - } -#endif /* __s390x__ */ - - dummy = 0; - reg2 = reg3 = 0; - reg4 = ((unsigned long) &dummy) + 1; - asm volatile( - " csp %0,%2" - : : "d" (reg2), "d" (reg3), "d" (reg4), "m" (dummy) : "cc" ); -} - -static inline void __tlb_flush_full(struct mm_struct *mm) -{ - cpumask_t local_cpumask; - - preempt_disable(); - /* - * If the process only ran on the local cpu, do a local flush. - */ - local_cpumask = cpumask_of_cpu(smp_processor_id()); - if (cpus_equal(mm->cpu_vm_mask, local_cpumask)) - __tlb_flush_local(); - else - __tlb_flush_global(); - preempt_enable(); -} -#else -#define __tlb_flush_full(mm) __tlb_flush_local() -#endif - -/* - * Flush all tlb entries of a page table on all cpus. - */ -static inline void __tlb_flush_idte(unsigned long asce) -{ - asm volatile( - " .insn rrf,0xb98e0000,0,%0,%1,0" - : : "a" (2048), "a" (asce) : "cc" ); -} - -static inline void __tlb_flush_mm(struct mm_struct * mm) -{ - if (unlikely(cpus_empty(mm->cpu_vm_mask))) - return; - /* - * If the machine has IDTE we prefer to do a per mm flush - * on all cpus instead of doing a local flush if the mm - * only ran on the local cpu. - */ - if (MACHINE_HAS_IDTE) { - if (mm->context.noexec) - __tlb_flush_idte((unsigned long) - get_shadow_table(mm->pgd) | - mm->context.asce_bits); - __tlb_flush_idte((unsigned long) mm->pgd | - mm->context.asce_bits); - return; - } - __tlb_flush_full(mm); -} - -static inline void __tlb_flush_mm_cond(struct mm_struct * mm) -{ - if (atomic_read(&mm->mm_users) <= 1 && mm == current->active_mm) - __tlb_flush_mm(mm); -} - -/* - * TLB flushing: - * flush_tlb() - flushes the current mm struct TLBs - * flush_tlb_all() - flushes all processes TLBs - * flush_tlb_mm(mm) - flushes the specified mm context TLB's - * flush_tlb_page(vma, vmaddr) - flushes one page - * flush_tlb_range(vma, start, end) - flushes a range of pages - * flush_tlb_kernel_range(start, end) - flushes a range of kernel pages - */ - -/* - * flush_tlb_mm goes together with ptep_set_wrprotect for the - * copy_page_range operation and flush_tlb_range is related to - * ptep_get_and_clear for change_protection. ptep_set_wrprotect and - * ptep_get_and_clear do not flush the TLBs directly if the mm has - * only one user. At the end of the update the flush_tlb_mm and - * flush_tlb_range functions need to do the flush. - */ -#define flush_tlb() do { } while (0) -#define flush_tlb_all() do { } while (0) -#define flush_tlb_page(vma, addr) do { } while (0) - -static inline void flush_tlb_mm(struct mm_struct *mm) -{ - __tlb_flush_mm_cond(mm); -} - -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ - __tlb_flush_mm_cond(vma->vm_mm); -} - -static inline void flush_tlb_kernel_range(unsigned long start, - unsigned long end) -{ - __tlb_flush_mm(&init_mm); -} - -#endif /* _S390_TLBFLUSH_H */ diff --git a/include/asm-s390/todclk.h b/include/asm-s390/todclk.h deleted file mode 100644 index c7f62055488a..000000000000 --- a/include/asm-s390/todclk.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * File...........: linux/include/asm/todclk.h - * Author(s)......: Holger Smolinski - * Bugreports.to..: - * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000 - * - * History of changes (starts July 2000) - */ - -#ifndef __ASM_TODCLK_H -#define __ASM_TODCLK_H - -#ifdef __KERNEL__ - -#define TOD_uSEC (0x1000ULL) -#define TOD_mSEC (1000 * TOD_uSEC) -#define TOD_SEC (1000 * TOD_mSEC) -#define TOD_MIN (60 * TOD_SEC) -#define TOD_HOUR (60 * TOD_MIN) - -#endif - -#endif diff --git a/include/asm-s390/topology.h b/include/asm-s390/topology.h deleted file mode 100644 index d96c91643458..000000000000 --- a/include/asm-s390/topology.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef _ASM_S390_TOPOLOGY_H -#define _ASM_S390_TOPOLOGY_H - -#include - -#define mc_capable() (1) - -cpumask_t cpu_coregroup_map(unsigned int cpu); - -extern cpumask_t cpu_core_map[NR_CPUS]; - -#define topology_core_siblings(cpu) (cpu_core_map[cpu]) - -int topology_set_cpu_management(int fc); -void topology_schedule_update(void); - -#define POLARIZATION_UNKNWN (-1) -#define POLARIZATION_HRZ (0) -#define POLARIZATION_VL (1) -#define POLARIZATION_VM (2) -#define POLARIZATION_VH (3) - -#ifdef CONFIG_SMP -void s390_init_cpu_topology(void); -#else -static inline void s390_init_cpu_topology(void) -{ -}; -#endif - -#include - -#endif /* _ASM_S390_TOPOLOGY_H */ diff --git a/include/asm-s390/types.h b/include/asm-s390/types.h deleted file mode 100644 index 41c547656130..000000000000 --- a/include/asm-s390/types.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * include/asm-s390/types.h - * - * S390 version - * - * Derived from "include/asm-i386/types.h" - */ - -#ifndef _S390_TYPES_H -#define _S390_TYPES_H - -#ifndef __s390x__ -# include -#else -# include -#endif - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -/* A address type so that arithmetic can be done on it & it can be upgraded to - 64 bit when necessary -*/ -typedef unsigned long addr_t; -typedef __signed__ long saddr_t; - -#endif /* __ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#ifndef __s390x__ -#define BITS_PER_LONG 32 -#else -#define BITS_PER_LONG 64 -#endif - -#ifndef __ASSEMBLY__ - -typedef u64 dma64_addr_t; -#ifdef __s390x__ -/* DMA addresses come in 32-bit and 64-bit flavours. */ -typedef u64 dma_addr_t; -#else -typedef u32 dma_addr_t; -#endif - -#ifndef __s390x__ -typedef union { - unsigned long long pair; - struct { - unsigned long even; - unsigned long odd; - } subreg; -} register_pair; - -#endif /* ! __s390x__ */ -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _S390_TYPES_H */ diff --git a/include/asm-s390/uaccess.h b/include/asm-s390/uaccess.h deleted file mode 100644 index 0235970278f0..000000000000 --- a/include/asm-s390/uaccess.h +++ /dev/null @@ -1,363 +0,0 @@ -/* - * include/asm-s390/uaccess.h - * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com) - * - * Derived from "include/asm-i386/uaccess.h" - */ -#ifndef __S390_UACCESS_H -#define __S390_UACCESS_H - -/* - * User space memory access functions - */ -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ - -#define MAKE_MM_SEG(a) ((mm_segment_t) { (a) }) - - -#define KERNEL_DS MAKE_MM_SEG(0) -#define USER_DS MAKE_MM_SEG(1) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current->thread.mm_segment) - -#define set_fs(x) \ -({ \ - unsigned long __pto; \ - current->thread.mm_segment = (x); \ - __pto = current->thread.mm_segment.ar4 ? \ - S390_lowcore.user_asce : S390_lowcore.kernel_asce; \ - __ctl_load(__pto, 7, 7); \ -}) - -#define segment_eq(a,b) ((a).ar4 == (b).ar4) - - -static inline int __access_ok(const void __user *addr, unsigned long size) -{ - return 1; -} -#define access_ok(type,addr,size) __access_ok(addr,size) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -struct uaccess_ops { - size_t (*copy_from_user)(size_t, const void __user *, void *); - size_t (*copy_from_user_small)(size_t, const void __user *, void *); - size_t (*copy_to_user)(size_t, void __user *, const void *); - size_t (*copy_to_user_small)(size_t, void __user *, const void *); - size_t (*copy_in_user)(size_t, void __user *, const void __user *); - size_t (*clear_user)(size_t, void __user *); - size_t (*strnlen_user)(size_t, const char __user *); - size_t (*strncpy_from_user)(size_t, const char __user *, char *); - int (*futex_atomic_op)(int op, int __user *, int oparg, int *old); - int (*futex_atomic_cmpxchg)(int __user *, int old, int new); -}; - -extern struct uaccess_ops uaccess; -extern struct uaccess_ops uaccess_std; -extern struct uaccess_ops uaccess_mvcos; -extern struct uaccess_ops uaccess_mvcos_switch; -extern struct uaccess_ops uaccess_pt; - -static inline int __put_user_fn(size_t size, void __user *ptr, void *x) -{ - size = uaccess.copy_to_user_small(size, ptr, x); - return size ? -EFAULT : size; -} - -static inline int __get_user_fn(size_t size, const void __user *ptr, void *x) -{ - size = uaccess.copy_from_user_small(size, ptr, x); - return size ? -EFAULT : size; -} - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - */ -#define __put_user(x, ptr) \ -({ \ - __typeof__(*(ptr)) __x = (x); \ - int __pu_err = -EFAULT; \ - __chk_user_ptr(ptr); \ - switch (sizeof (*(ptr))) { \ - case 1: \ - case 2: \ - case 4: \ - case 8: \ - __pu_err = __put_user_fn(sizeof (*(ptr)), \ - ptr, &__x); \ - break; \ - default: \ - __put_user_bad(); \ - break; \ - } \ - __pu_err; \ -}) - -#define put_user(x, ptr) \ -({ \ - might_sleep(); \ - __put_user(x, ptr); \ -}) - - -extern int __put_user_bad(void) __attribute__((noreturn)); - -#define __get_user(x, ptr) \ -({ \ - int __gu_err = -EFAULT; \ - __chk_user_ptr(ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: { \ - unsigned char __x; \ - __gu_err = __get_user_fn(sizeof (*(ptr)), \ - ptr, &__x); \ - (x) = *(__force __typeof__(*(ptr)) *) &__x; \ - break; \ - }; \ - case 2: { \ - unsigned short __x; \ - __gu_err = __get_user_fn(sizeof (*(ptr)), \ - ptr, &__x); \ - (x) = *(__force __typeof__(*(ptr)) *) &__x; \ - break; \ - }; \ - case 4: { \ - unsigned int __x; \ - __gu_err = __get_user_fn(sizeof (*(ptr)), \ - ptr, &__x); \ - (x) = *(__force __typeof__(*(ptr)) *) &__x; \ - break; \ - }; \ - case 8: { \ - unsigned long long __x; \ - __gu_err = __get_user_fn(sizeof (*(ptr)), \ - ptr, &__x); \ - (x) = *(__force __typeof__(*(ptr)) *) &__x; \ - break; \ - }; \ - default: \ - __get_user_bad(); \ - break; \ - } \ - __gu_err; \ -}) - -#define get_user(x, ptr) \ -({ \ - might_sleep(); \ - __get_user(x, ptr); \ -}) - -extern int __get_user_bad(void) __attribute__((noreturn)); - -#define __put_user_unaligned __put_user -#define __get_user_unaligned __get_user - -/** - * __copy_to_user: - Copy a block of data into user space, with less checking. - * @to: Destination address, in user space. - * @from: Source address, in kernel space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from kernel space to user space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - */ -static inline unsigned long __must_check -__copy_to_user(void __user *to, const void *from, unsigned long n) -{ - if (__builtin_constant_p(n) && (n <= 256)) - return uaccess.copy_to_user_small(n, to, from); - else - return uaccess.copy_to_user(n, to, from); -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -/** - * copy_to_user: - Copy a block of data into user space. - * @to: Destination address, in user space. - * @from: Source address, in kernel space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from kernel space to user space. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - */ -static inline unsigned long __must_check -copy_to_user(void __user *to, const void *from, unsigned long n) -{ - might_sleep(); - if (access_ok(VERIFY_WRITE, to, n)) - n = __copy_to_user(to, from, n); - return n; -} - -/** - * __copy_from_user: - Copy a block of data from user space, with less checking. - * @to: Destination address, in kernel space. - * @from: Source address, in user space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from user space to kernel space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - * - * If some data could not be copied, this function will pad the copied - * data to the requested size using zero bytes. - */ -static inline unsigned long __must_check -__copy_from_user(void *to, const void __user *from, unsigned long n) -{ - if (__builtin_constant_p(n) && (n <= 256)) - return uaccess.copy_from_user_small(n, from, to); - else - return uaccess.copy_from_user(n, from, to); -} - -/** - * copy_from_user: - Copy a block of data from user space. - * @to: Destination address, in kernel space. - * @from: Source address, in user space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from user space to kernel space. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - * - * If some data could not be copied, this function will pad the copied - * data to the requested size using zero bytes. - */ -static inline unsigned long __must_check -copy_from_user(void *to, const void __user *from, unsigned long n) -{ - might_sleep(); - if (access_ok(VERIFY_READ, from, n)) - n = __copy_from_user(to, from, n); - else - memset(to, 0, n); - return n; -} - -static inline unsigned long __must_check -__copy_in_user(void __user *to, const void __user *from, unsigned long n) -{ - return uaccess.copy_in_user(n, to, from); -} - -static inline unsigned long __must_check -copy_in_user(void __user *to, const void __user *from, unsigned long n) -{ - might_sleep(); - if (__access_ok(from,n) && __access_ok(to,n)) - n = __copy_in_user(to, from, n); - return n; -} - -/* - * Copy a null terminated string from userspace. - */ -static inline long __must_check -strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res = -EFAULT; - might_sleep(); - if (access_ok(VERIFY_READ, src, 1)) - res = uaccess.strncpy_from_user(count, src, dst); - return res; -} - -static inline unsigned long -strnlen_user(const char __user * src, unsigned long n) -{ - might_sleep(); - return uaccess.strnlen_user(n, src); -} - -/** - * strlen_user: - Get the size of a string in user space. - * @str: The string to measure. - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * - * If there is a limit on the length of a valid string, you may wish to - * consider using strnlen_user() instead. - */ -#define strlen_user(str) strnlen_user(str, ~0UL) - -/* - * Zero Userspace - */ - -static inline unsigned long __must_check -__clear_user(void __user *to, unsigned long n) -{ - return uaccess.clear_user(n, to); -} - -static inline unsigned long __must_check -clear_user(void __user *to, unsigned long n) -{ - might_sleep(); - if (access_ok(VERIFY_WRITE, to, n)) - n = uaccess.clear_user(n, to); - return n; -} - -#endif /* __S390_UACCESS_H */ diff --git a/include/asm-s390/ucontext.h b/include/asm-s390/ucontext.h deleted file mode 100644 index d69bec0b03f5..000000000000 --- a/include/asm-s390/ucontext.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-s390/ucontext.h - * - * S390 version - * - * Derived from "include/asm-i386/ucontext.h" - */ - -#ifndef _ASM_S390_UCONTEXT_H -#define _ASM_S390_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - _sigregs uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* !_ASM_S390_UCONTEXT_H */ diff --git a/include/asm-s390/unaligned.h b/include/asm-s390/unaligned.h deleted file mode 100644 index da9627afe5d8..000000000000 --- a/include/asm-s390/unaligned.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_S390_UNALIGNED_H -#define _ASM_S390_UNALIGNED_H - -/* - * The S390 can do unaligned accesses itself. - */ -#include -#include - -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be - -#endif /* _ASM_S390_UNALIGNED_H */ diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h deleted file mode 100644 index c8ad350d1444..000000000000 --- a/include/asm-s390/unistd.h +++ /dev/null @@ -1,411 +0,0 @@ -/* - * include/asm-s390/unistd.h - * - * S390 version - * - * Derived from "include/asm-i386/unistd.h" - */ - -#ifndef _ASM_S390_UNISTD_H_ -#define _ASM_S390_UNISTD_H_ - -/* - * This file contains the system call numbers. - */ - -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_restart_syscall 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_brk 45 -#define __NR_signal 48 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_setpgid 57 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_symlink 83 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_lookup_dcookie 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_getdents 141 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_getpmsg 188 -#define __NR_putpmsg 189 -#define __NR_vfork 190 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 -#define __NR_getdents64 220 -#define __NR_readahead 222 -#define __NR_setxattr 224 -#define __NR_lsetxattr 225 -#define __NR_fsetxattr 226 -#define __NR_getxattr 227 -#define __NR_lgetxattr 228 -#define __NR_fgetxattr 229 -#define __NR_listxattr 230 -#define __NR_llistxattr 231 -#define __NR_flistxattr 232 -#define __NR_removexattr 233 -#define __NR_lremovexattr 234 -#define __NR_fremovexattr 235 -#define __NR_gettid 236 -#define __NR_tkill 237 -#define __NR_futex 238 -#define __NR_sched_setaffinity 239 -#define __NR_sched_getaffinity 240 -#define __NR_tgkill 241 -/* Number 242 is reserved for tux */ -#define __NR_io_setup 243 -#define __NR_io_destroy 244 -#define __NR_io_getevents 245 -#define __NR_io_submit 246 -#define __NR_io_cancel 247 -#define __NR_exit_group 248 -#define __NR_epoll_create 249 -#define __NR_epoll_ctl 250 -#define __NR_epoll_wait 251 -#define __NR_set_tid_address 252 -#define __NR_fadvise64 253 -#define __NR_timer_create 254 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -/* Number 263 is reserved for vserver */ -#define __NR_statfs64 265 -#define __NR_fstatfs64 266 -#define __NR_remap_file_pages 267 -/* Number 268 is reserved for new sys_mbind */ -/* Number 269 is reserved for new sys_get_mempolicy */ -/* Number 270 is reserved for new sys_set_mempolicy */ -#define __NR_mq_open 271 -#define __NR_mq_unlink 272 -#define __NR_mq_timedsend 273 -#define __NR_mq_timedreceive 274 -#define __NR_mq_notify 275 -#define __NR_mq_getsetattr 276 -#define __NR_kexec_load 277 -#define __NR_add_key 278 -#define __NR_request_key 279 -#define __NR_keyctl 280 -#define __NR_waitid 281 -#define __NR_ioprio_set 282 -#define __NR_ioprio_get 283 -#define __NR_inotify_init 284 -#define __NR_inotify_add_watch 285 -#define __NR_inotify_rm_watch 286 -/* Number 287 is reserved for new sys_migrate_pages */ -#define __NR_openat 288 -#define __NR_mkdirat 289 -#define __NR_mknodat 290 -#define __NR_fchownat 291 -#define __NR_futimesat 292 -#define __NR_unlinkat 294 -#define __NR_renameat 295 -#define __NR_linkat 296 -#define __NR_symlinkat 297 -#define __NR_readlinkat 298 -#define __NR_fchmodat 299 -#define __NR_faccessat 300 -#define __NR_pselect6 301 -#define __NR_ppoll 302 -#define __NR_unshare 303 -#define __NR_set_robust_list 304 -#define __NR_get_robust_list 305 -#define __NR_splice 306 -#define __NR_sync_file_range 307 -#define __NR_tee 308 -#define __NR_vmsplice 309 -/* Number 310 is reserved for new sys_move_pages */ -#define __NR_getcpu 311 -#define __NR_epoll_pwait 312 -#define __NR_utimes 313 -#define __NR_fallocate 314 -#define __NR_utimensat 315 -#define __NR_signalfd 316 -#define __NR_timerfd 317 -#define __NR_eventfd 318 -#define __NR_timerfd_create 319 -#define __NR_timerfd_settime 320 -#define __NR_timerfd_gettime 321 -#define __NR_signalfd4 322 -#define __NR_eventfd2 323 -#define __NR_inotify_init1 324 -#define __NR_pipe2 325 -#define __NR_dup3 326 -#define __NR_epoll_create1 327 -#define NR_syscalls 328 - -/* - * There are some system calls that are not present on 64 bit, some - * have a different name although they do the same (e.g. __NR_chown32 - * is __NR_chown on 64 bit). - */ -#ifndef __s390x__ - -#define __NR_time 13 -#define __NR_lchown 16 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_getrlimit 76 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_fchown 95 -#define __NR_ioperm 101 -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR__newselect 142 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_chown 182 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_fcntl64 221 -#define __NR_sendfile64 223 -#define __NR_fadvise64_64 264 -#define __NR_fstatat64 293 - -#else - -#define __NR_select 142 -#define __NR_getrlimit 191 /* SuS compliant getrlimit */ -#define __NR_lchown 198 -#define __NR_getuid 199 -#define __NR_getgid 200 -#define __NR_geteuid 201 -#define __NR_getegid 202 -#define __NR_setreuid 203 -#define __NR_setregid 204 -#define __NR_getgroups 205 -#define __NR_setgroups 206 -#define __NR_fchown 207 -#define __NR_setresuid 208 -#define __NR_getresuid 209 -#define __NR_setresgid 210 -#define __NR_getresgid 211 -#define __NR_chown 212 -#define __NR_setuid 213 -#define __NR_setgid 214 -#define __NR_setfsuid 215 -#define __NR_setfsgid 216 -#define __NR_newfstatat 293 - -#endif - -#ifdef __KERNEL__ - -#ifndef CONFIG_64BIT -#define __IGNORE_select -#else -#define __IGNORE_time -#endif - -/* Ignore NUMA system calls. Not wired up on s390. */ -#define __IGNORE_mbind -#define __IGNORE_get_mempolicy -#define __IGNORE_set_mempolicy -#define __IGNORE_migrate_pages -#define __IGNORE_move_pages - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND -# ifndef CONFIG_64BIT -# define __ARCH_WANT_STAT64 -# define __ARCH_WANT_SYS_TIME -# endif -# ifdef CONFIG_COMPAT -# define __ARCH_WANT_COMPAT_SYS_TIME -# define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND -# endif - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") - -#endif /* __KERNEL__ */ -#endif /* _ASM_S390_UNISTD_H_ */ diff --git a/include/asm-s390/user.h b/include/asm-s390/user.h deleted file mode 100644 index 1b050e35fdc6..000000000000 --- a/include/asm-s390/user.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * include/asm-s390/user.h - * - * S390 version - * - * Derived from "include/asm-i386/usr.h" - */ - -#ifndef _S390_USER_H -#define _S390_USER_H - -#include -#include -/* Core file format: The core file is written in such a way that gdb - can understand it and provide useful information to the user (under - linux we use the 'trad-core' bfd). There are quite a number of - obstacles to being able to view the contents of the floating point - registers, and until these are solved you will not be able to view the - contents of them. Actually, you can read in the core file and look at - the contents of the user struct to find out what the floating point - registers contain. - The actual file contents are as follows: - UPAGE: 1 page consisting of a user struct that tells gdb what is present - in the file. Directly after this is a copy of the task_struct, which - is currently not used by gdb, but it may come in useful at some point. - All of the registers are stored as part of the upage. The upage should - always be only one page. - DATA: The data area is stored. We use current->end_text to - current->brk to pick up all of the user variables, plus any memory - that may have been malloced. No attempt is made to determine if a page - is demand-zero or if a page is totally unused, we just cover the entire - range. All of the addresses are rounded in such a way that an integral - number of pages is written. - STACK: We need the stack information in order to get a meaningful - backtrace. We need to write the data from (esp) to - current->start_stack, so we round each of these off in order to be able - to write an integer number of pages. - The minimum core file size is 3 pages, or 12288 bytes. -*/ - - -/* - * This is the old layout of "struct pt_regs", and - * is still the layout used by user mode (the new - * pt_regs doesn't have all registers as the kernel - * doesn't use the extra segment registers) - */ - -/* When the kernel dumps core, it starts by dumping the user struct - - this will be used by gdb to figure out where the data and stack segments - are within the file, and what virtual addresses to use. */ -struct user { -/* We start with the registers, to mimic the way that "memory" is returned - from the ptrace(3,...) function. */ - struct user_regs_struct regs; /* Where the registers are actually stored */ -/* The rest of this junk is to help gdb figure out what goes where */ - unsigned long int u_tsize; /* Text segment size (pages). */ - unsigned long int u_dsize; /* Data segment size (pages). */ - unsigned long int u_ssize; /* Stack segment size (pages). */ - unsigned long start_code; /* Starting virtual address of text. */ - unsigned long start_stack; /* Starting virtual address of stack area. - This is actually the bottom of the stack, - the top of the stack is always found in the - esp register. */ - long int signal; /* Signal that caused the core dump. */ - unsigned long u_ar0; /* Used by gdb to help find the values for */ - /* the registers. */ - unsigned long magic; /* To uniquely identify a core file */ - char u_comm[32]; /* User command that was responsible */ -}; -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif /* _S390_USER_H */ diff --git a/include/asm-s390/vtoc.h b/include/asm-s390/vtoc.h deleted file mode 100644 index 3a5267d90d29..000000000000 --- a/include/asm-s390/vtoc.h +++ /dev/null @@ -1,203 +0,0 @@ -/* - * include/asm-s390/vtoc.h - * - * This file contains volume label definitions for DASD devices. - * - * (C) Copyright IBM Corp. 2005 - * - * Author(s): Volker Sameske - * - */ - -#ifndef _ASM_S390_VTOC_H -#define _ASM_S390_VTOC_H - -#include - -struct vtoc_ttr -{ - __u16 tt; - __u8 r; -} __attribute__ ((packed)); - -struct vtoc_cchhb -{ - __u16 cc; - __u16 hh; - __u8 b; -} __attribute__ ((packed)); - -struct vtoc_cchh -{ - __u16 cc; - __u16 hh; -} __attribute__ ((packed)); - -struct vtoc_labeldate -{ - __u8 year; - __u16 day; -} __attribute__ ((packed)); - -struct vtoc_volume_label -{ - char volkey[4]; /* volume key = volume label */ - char vollbl[4]; /* volume label */ - char volid[6]; /* volume identifier */ - __u8 security; /* security byte */ - struct vtoc_cchhb vtoc; /* VTOC address */ - char res1[5]; /* reserved */ - char cisize[4]; /* CI-size for FBA,... */ - /* ...blanks for CKD */ - char blkperci[4]; /* no of blocks per CI (FBA), blanks for CKD */ - char labperci[4]; /* no of labels per CI (FBA), blanks for CKD */ - char res2[4]; /* reserved */ - char lvtoc[14]; /* owner code for LVTOC */ - char res3[29]; /* reserved */ -} __attribute__ ((packed)); - -struct vtoc_extent -{ - __u8 typeind; /* extent type indicator */ - __u8 seqno; /* extent sequence number */ - struct vtoc_cchh llimit; /* starting point of this extent */ - struct vtoc_cchh ulimit; /* ending point of this extent */ -} __attribute__ ((packed)); - -struct vtoc_dev_const -{ - __u16 DS4DSCYL; /* number of logical cyls */ - __u16 DS4DSTRK; /* number of tracks in a logical cylinder */ - __u16 DS4DEVTK; /* device track length */ - __u8 DS4DEVI; /* non-last keyed record overhead */ - __u8 DS4DEVL; /* last keyed record overhead */ - __u8 DS4DEVK; /* non-keyed record overhead differential */ - __u8 DS4DEVFG; /* flag byte */ - __u16 DS4DEVTL; /* device tolerance */ - __u8 DS4DEVDT; /* number of DSCB's per track */ - __u8 DS4DEVDB; /* number of directory blocks per track */ -} __attribute__ ((packed)); - -struct vtoc_format1_label -{ - char DS1DSNAM[44]; /* data set name */ - __u8 DS1FMTID; /* format identifier */ - char DS1DSSN[6]; /* data set serial number */ - __u16 DS1VOLSQ; /* volume sequence number */ - struct vtoc_labeldate DS1CREDT; /* creation date: ydd */ - struct vtoc_labeldate DS1EXPDT; /* expiration date */ - __u8 DS1NOEPV; /* number of extents on volume */ - __u8 DS1NOBDB; /* no. of bytes used in last direction blk */ - __u8 DS1FLAG1; /* flag 1 */ - char DS1SYSCD[13]; /* system code */ - struct vtoc_labeldate DS1REFD; /* date last referenced */ - __u8 DS1SMSFG; /* system managed storage indicators */ - __u8 DS1SCXTF; /* sec. space extension flag byte */ - __u16 DS1SCXTV; /* secondary space extension value */ - __u8 DS1DSRG1; /* data set organisation byte 1 */ - __u8 DS1DSRG2; /* data set organisation byte 2 */ - __u8 DS1RECFM; /* record format */ - __u8 DS1OPTCD; /* option code */ - __u16 DS1BLKL; /* block length */ - __u16 DS1LRECL; /* record length */ - __u8 DS1KEYL; /* key length */ - __u16 DS1RKP; /* relative key position */ - __u8 DS1DSIND; /* data set indicators */ - __u8 DS1SCAL1; /* secondary allocation flag byte */ - char DS1SCAL3[3]; /* secondary allocation quantity */ - struct vtoc_ttr DS1LSTAR; /* last used track and block on track */ - __u16 DS1TRBAL; /* space remaining on last used track */ - __u16 res1; /* reserved */ - struct vtoc_extent DS1EXT1; /* first extent description */ - struct vtoc_extent DS1EXT2; /* second extent description */ - struct vtoc_extent DS1EXT3; /* third extent description */ - struct vtoc_cchhb DS1PTRDS; /* possible pointer to f2 or f3 DSCB */ -} __attribute__ ((packed)); - -struct vtoc_format4_label -{ - char DS4KEYCD[44]; /* key code for VTOC labels: 44 times 0x04 */ - __u8 DS4IDFMT; /* format identifier */ - struct vtoc_cchhb DS4HPCHR; /* highest address of a format 1 DSCB */ - __u16 DS4DSREC; /* number of available DSCB's */ - struct vtoc_cchh DS4HCCHH; /* CCHH of next available alternate track */ - __u16 DS4NOATK; /* number of remaining alternate tracks */ - __u8 DS4VTOCI; /* VTOC indicators */ - __u8 DS4NOEXT; /* number of extents in VTOC */ - __u8 DS4SMSFG; /* system managed storage indicators */ - __u8 DS4DEVAC; /* number of alternate cylinders. - * Subtract from first two bytes of - * DS4DEVSZ to get number of usable - * cylinders. can be zero. valid - * only if DS4DEVAV on. */ - struct vtoc_dev_const DS4DEVCT; /* device constants */ - char DS4AMTIM[8]; /* VSAM time stamp */ - char DS4AMCAT[3]; /* VSAM catalog indicator */ - char DS4R2TIM[8]; /* VSAM volume/catalog match time stamp */ - char res1[5]; /* reserved */ - char DS4F6PTR[5]; /* pointer to first format 6 DSCB */ - struct vtoc_extent DS4VTOCE; /* VTOC extent description */ - char res2[10]; /* reserved */ - __u8 DS4EFLVL; /* extended free-space management level */ - struct vtoc_cchhb DS4EFPTR; /* pointer to extended free-space info */ - char res3[9]; /* reserved */ -} __attribute__ ((packed)); - -struct vtoc_ds5ext -{ - __u16 t; /* RTA of the first track of free extent */ - __u16 fc; /* number of whole cylinders in free ext. */ - __u8 ft; /* number of remaining free tracks */ -} __attribute__ ((packed)); - -struct vtoc_format5_label -{ - char DS5KEYID[4]; /* key identifier */ - struct vtoc_ds5ext DS5AVEXT; /* first available (free-space) extent. */ - struct vtoc_ds5ext DS5EXTAV[7]; /* seven available extents */ - __u8 DS5FMTID; /* format identifier */ - struct vtoc_ds5ext DS5MAVET[18]; /* eighteen available extents */ - struct vtoc_cchhb DS5PTRDS; /* pointer to next format5 DSCB */ -} __attribute__ ((packed)); - -struct vtoc_ds7ext -{ - __u32 a; /* starting RTA value */ - __u32 b; /* ending RTA value + 1 */ -} __attribute__ ((packed)); - -struct vtoc_format7_label -{ - char DS7KEYID[4]; /* key identifier */ - struct vtoc_ds7ext DS7EXTNT[5]; /* space for 5 extent descriptions */ - __u8 DS7FMTID; /* format identifier */ - struct vtoc_ds7ext DS7ADEXT[11]; /* space for 11 extent descriptions */ - char res1[2]; /* reserved */ - struct vtoc_cchhb DS7PTRDS; /* pointer to next FMT7 DSCB */ -} __attribute__ ((packed)); - -struct vtoc_cms_label { - __u8 label_id[4]; /* Label identifier */ - __u8 vol_id[6]; /* Volid */ - __u16 version_id; /* Version identifier */ - __u32 block_size; /* Disk block size */ - __u32 origin_ptr; /* Disk origin pointer */ - __u32 usable_count; /* Number of usable cylinders/blocks */ - __u32 formatted_count; /* Maximum number of formatted cylinders/ - * blocks */ - __u32 block_count; /* Disk size in CMS blocks */ - __u32 used_count; /* Number of CMS blocks in use */ - __u32 fst_size; /* File Status Table (FST) size */ - __u32 fst_count; /* Number of FSTs per CMS block */ - __u8 format_date[6]; /* Disk FORMAT date */ - __u8 reserved1[2]; - __u32 disk_offset; /* Disk offset when reserved*/ - __u32 map_block; /* Allocation Map Block with next hole */ - __u32 hblk_disp; /* Displacement into HBLK data of next hole */ - __u32 user_disp; /* Displacement into user part of Allocation - * map */ - __u8 reserved2[4]; - __u8 segment_name[8]; /* Name of shared segment */ -} __attribute__ ((packed)); - -#endif /* _ASM_S390_VTOC_H */ diff --git a/include/asm-s390/xor.h b/include/asm-s390/xor.h deleted file mode 100644 index c82eb12a5b18..000000000000 --- a/include/asm-s390/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-s390/zcrypt.h b/include/asm-s390/zcrypt.h deleted file mode 100644 index 00d3bbd44117..000000000000 --- a/include/asm-s390/zcrypt.h +++ /dev/null @@ -1,276 +0,0 @@ -/* - * include/asm-s390/zcrypt.h - * - * zcrypt 2.1.0 (user-visible header) - * - * Copyright (C) 2001, 2006 IBM Corporation - * Author(s): Robert Burroughs - * Eric Rossman (edrossma@us.ibm.com) - * - * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_S390_ZCRYPT_H -#define __ASM_S390_ZCRYPT_H - -#define ZCRYPT_VERSION 2 -#define ZCRYPT_RELEASE 1 -#define ZCRYPT_VARIANT 1 - -#include -#include - -/** - * struct ica_rsa_modexpo - * - * Requirements: - * - outputdatalength is at least as large as inputdatalength. - * - All key parts are right justified in their fields, padded on - * the left with zeroes. - * - length(b_key) = inputdatalength - * - length(n_modulus) = inputdatalength - */ -struct ica_rsa_modexpo { - char __user * inputdata; - unsigned int inputdatalength; - char __user * outputdata; - unsigned int outputdatalength; - char __user * b_key; - char __user * n_modulus; -}; - -/** - * struct ica_rsa_modexpo_crt - * - * Requirements: - * - inputdatalength is even. - * - outputdatalength is at least as large as inputdatalength. - * - All key parts are right justified in their fields, padded on - * the left with zeroes. - * - length(bp_key) = inputdatalength/2 + 8 - * - length(bq_key) = inputdatalength/2 - * - length(np_key) = inputdatalength/2 + 8 - * - length(nq_key) = inputdatalength/2 - * - length(u_mult_inv) = inputdatalength/2 + 8 - */ -struct ica_rsa_modexpo_crt { - char __user * inputdata; - unsigned int inputdatalength; - char __user * outputdata; - unsigned int outputdatalength; - char __user * bp_key; - char __user * bq_key; - char __user * np_prime; - char __user * nq_prime; - char __user * u_mult_inv; -}; - -/** - * CPRBX - * Note that all shorts and ints are big-endian. - * All pointer fields are 16 bytes long, and mean nothing. - * - * A request CPRB is followed by a request_parameter_block. - * - * The request (or reply) parameter block is organized thus: - * function code - * VUD block - * key block - */ -struct CPRBX { - unsigned short cprb_len; /* CPRB length 220 */ - unsigned char cprb_ver_id; /* CPRB version id. 0x02 */ - unsigned char pad_000[3]; /* Alignment pad bytes */ - unsigned char func_id[2]; /* function id 0x5432 */ - unsigned char cprb_flags[4]; /* Flags */ - unsigned int req_parml; /* request parameter buffer len */ - unsigned int req_datal; /* request data buffer */ - unsigned int rpl_msgbl; /* reply message block length */ - unsigned int rpld_parml; /* replied parameter block len */ - unsigned int rpl_datal; /* reply data block len */ - unsigned int rpld_datal; /* replied data block len */ - unsigned int req_extbl; /* request extension block len */ - unsigned char pad_001[4]; /* reserved */ - unsigned int rpld_extbl; /* replied extension block len */ - unsigned char padx000[16 - sizeof (char *)]; - unsigned char * req_parmb; /* request parm block 'address' */ - unsigned char padx001[16 - sizeof (char *)]; - unsigned char * req_datab; /* request data block 'address' */ - unsigned char padx002[16 - sizeof (char *)]; - unsigned char * rpl_parmb; /* reply parm block 'address' */ - unsigned char padx003[16 - sizeof (char *)]; - unsigned char * rpl_datab; /* reply data block 'address' */ - unsigned char padx004[16 - sizeof (char *)]; - unsigned char * req_extb; /* request extension block 'addr'*/ - unsigned char padx005[16 - sizeof (char *)]; - unsigned char * rpl_extb; /* reply extension block 'address'*/ - unsigned short ccp_rtcode; /* server return code */ - unsigned short ccp_rscode; /* server reason code */ - unsigned int mac_data_len; /* Mac Data Length */ - unsigned char logon_id[8]; /* Logon Identifier */ - unsigned char mac_value[8]; /* Mac Value */ - unsigned char mac_content_flgs;/* Mac content flag byte */ - unsigned char pad_002; /* Alignment */ - unsigned short domain; /* Domain */ - unsigned char usage_domain[4];/* Usage domain */ - unsigned char cntrl_domain[4];/* Control domain */ - unsigned char S390enf_mask[4];/* S/390 enforcement mask */ - unsigned char pad_004[36]; /* reserved */ -} __attribute__((packed)); - -/** - * xcRB - */ -struct ica_xcRB { - unsigned short agent_ID; - unsigned int user_defined; - unsigned short request_ID; - unsigned int request_control_blk_length; - unsigned char padding1[16 - sizeof (char *)]; - char __user * request_control_blk_addr; - unsigned int request_data_length; - char padding2[16 - sizeof (char *)]; - char __user * request_data_address; - unsigned int reply_control_blk_length; - char padding3[16 - sizeof (char *)]; - char __user * reply_control_blk_addr; - unsigned int reply_data_length; - char padding4[16 - sizeof (char *)]; - char __user * reply_data_addr; - unsigned short priority_window; - unsigned int status; -} __attribute__((packed)); -#define AUTOSELECT ((unsigned int)0xFFFFFFFF) - -#define ZCRYPT_IOCTL_MAGIC 'z' - -/** - * Interface notes: - * - * The ioctl()s which are implemented (along with relevant details) - * are: - * - * ICARSAMODEXPO - * Perform an RSA operation using a Modulus-Exponent pair - * This takes an ica_rsa_modexpo struct as its arg. - * - * NOTE: please refer to the comments preceding this structure - * for the implementation details for the contents of the - * block - * - * ICARSACRT - * Perform an RSA operation using a Chinese-Remainder Theorem key - * This takes an ica_rsa_modexpo_crt struct as its arg. - * - * NOTE: please refer to the comments preceding this structure - * for the implementation details for the contents of the - * block - * - * ZSECSENDCPRB - * Send an arbitrary CPRB to a crypto card. - * - * Z90STAT_STATUS_MASK - * Return an 64 element array of unsigned chars for the status of - * all devices. - * 0x01: PCICA - * 0x02: PCICC - * 0x03: PCIXCC_MCL2 - * 0x04: PCIXCC_MCL3 - * 0x05: CEX2C - * 0x06: CEX2A - * 0x0d: device is disabled via the proc filesystem - * - * Z90STAT_QDEPTH_MASK - * Return an 64 element array of unsigned chars for the queue - * depth of all devices. - * - * Z90STAT_PERDEV_REQCNT - * Return an 64 element array of unsigned integers for the number - * of successfully completed requests per device since the device - * was detected and made available. - * - * Z90STAT_REQUESTQ_COUNT - * Return an integer count of the number of entries waiting to be - * sent to a device. - * - * Z90STAT_PENDINGQ_COUNT - * Return an integer count of the number of entries sent to all - * devices awaiting the reply. - * - * Z90STAT_TOTALOPEN_COUNT - * Return an integer count of the number of open file handles. - * - * Z90STAT_DOMAIN_INDEX - * Return the integer value of the Cryptographic Domain. - * - * The following ioctls are deprecated and should be no longer used: - * - * Z90STAT_TOTALCOUNT - * Return an integer count of all device types together. - * - * Z90STAT_PCICACOUNT - * Return an integer count of all PCICAs. - * - * Z90STAT_PCICCCOUNT - * Return an integer count of all PCICCs. - * - * Z90STAT_PCIXCCMCL2COUNT - * Return an integer count of all MCL2 PCIXCCs. - * - * Z90STAT_PCIXCCMCL3COUNT - * Return an integer count of all MCL3 PCIXCCs. - * - * Z90STAT_CEX2CCOUNT - * Return an integer count of all CEX2Cs. - * - * Z90STAT_CEX2ACOUNT - * Return an integer count of all CEX2As. - * - * ICAZ90STATUS - * Return some device driver status in a ica_z90_status struct - * This takes an ica_z90_status struct as its arg. - * - * Z90STAT_PCIXCCCOUNT - * Return an integer count of all PCIXCCs (MCL2 + MCL3). - * This is DEPRECATED now that MCL3 PCIXCCs are treated differently from - * MCL2 PCIXCCs. - */ - -/** - * Supported ioctl calls - */ -#define ICARSAMODEXPO _IOC(_IOC_READ|_IOC_WRITE, ZCRYPT_IOCTL_MAGIC, 0x05, 0) -#define ICARSACRT _IOC(_IOC_READ|_IOC_WRITE, ZCRYPT_IOCTL_MAGIC, 0x06, 0) -#define ZSECSENDCPRB _IOC(_IOC_READ|_IOC_WRITE, ZCRYPT_IOCTL_MAGIC, 0x81, 0) - -/* New status calls */ -#define Z90STAT_TOTALCOUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x40, int) -#define Z90STAT_PCICACOUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x41, int) -#define Z90STAT_PCICCCOUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x42, int) -#define Z90STAT_PCIXCCMCL2COUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x4b, int) -#define Z90STAT_PCIXCCMCL3COUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x4c, int) -#define Z90STAT_CEX2CCOUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x4d, int) -#define Z90STAT_CEX2ACOUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x4e, int) -#define Z90STAT_REQUESTQ_COUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x44, int) -#define Z90STAT_PENDINGQ_COUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x45, int) -#define Z90STAT_TOTALOPEN_COUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x46, int) -#define Z90STAT_DOMAIN_INDEX _IOR(ZCRYPT_IOCTL_MAGIC, 0x47, int) -#define Z90STAT_STATUS_MASK _IOR(ZCRYPT_IOCTL_MAGIC, 0x48, char[64]) -#define Z90STAT_QDEPTH_MASK _IOR(ZCRYPT_IOCTL_MAGIC, 0x49, char[64]) -#define Z90STAT_PERDEV_REQCNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x4a, int[64]) - -#endif /* __ASM_S390_ZCRYPT_H */ -- cgit v1.2.3 From 5c7edcd7ee6b77b88252fe4096dce1a46a60c829 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Thu, 31 Jul 2008 02:04:09 -0700 Subject: tracehook: fix exit_signal=0 case My commit 2b2a1ff64afbadac842bbc58c5166962cf4f7664 introduced a regression (sorry about that) for the odd case of exit_signal=0 (e.g. clone_flags=0). This is not a normal use, but it's used by a case in the glibc test suite. Dying with exit_signal=0 sends no signal, but it's supposed to wake up a parent's blocked wait*() calls (unlike the delayed_group_leader case). This fixes tracehook_notify_death() and its caller to distinguish a "signal 0" wakeup from the delayed_group_leader case (with no wakeup). Signed-off-by: Roland McGrath Tested-by: Serge Hallyn Signed-off-by: Linus Torvalds --- include/linux/tracehook.h | 21 +++++++++++++-------- kernel/exit.c | 6 +++--- 2 files changed, 16 insertions(+), 11 deletions(-) diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index b1875582c1a1..12532839f508 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -493,16 +493,21 @@ static inline int tracehook_notify_jctl(int notify, int why) * @death_cookie: value to pass to tracehook_report_death() * @group_dead: nonzero if this was the last thread in the group to die * - * Return the signal number to send our parent with do_notify_parent(), or - * zero to send no signal and leave a zombie, or -1 to self-reap right now. + * A return value >= 0 means call do_notify_parent() with that signal + * number. Negative return value can be %DEATH_REAP to self-reap right + * now, or %DEATH_DELAYED_GROUP_LEADER to a zombie without notifying our + * parent. Note that a return value of 0 means a do_notify_parent() call + * that sends no signal, but still wakes up a parent blocked in wait*(). * * Called with write_lock_irq(&tasklist_lock) held. */ +#define DEATH_REAP -1 +#define DEATH_DELAYED_GROUP_LEADER -2 static inline int tracehook_notify_death(struct task_struct *task, void **death_cookie, int group_dead) { if (task->exit_signal == -1) - return task->ptrace ? SIGCHLD : -1; + return task->ptrace ? SIGCHLD : DEATH_REAP; /* * If something other than our normal parent is ptracing us, then @@ -512,21 +517,21 @@ static inline int tracehook_notify_death(struct task_struct *task, if (thread_group_empty(task) && !ptrace_reparented(task)) return task->exit_signal; - return task->ptrace ? SIGCHLD : 0; + return task->ptrace ? SIGCHLD : DEATH_DELAYED_GROUP_LEADER; } /** * tracehook_report_death - task is dead and ready to be reaped * @task: @current task now exiting - * @signal: signal number sent to parent, or 0 or -1 + * @signal: return value from tracheook_notify_death() * @death_cookie: value passed back from tracehook_notify_death() * @group_dead: nonzero if this was the last thread in the group to die * * Thread has just become a zombie or is about to self-reap. If positive, * @signal is the signal number just sent to the parent (usually %SIGCHLD). - * If @signal is -1, this thread will self-reap. If @signal is 0, this is - * a delayed_group_leader() zombie. The @death_cookie was passed back by - * tracehook_notify_death(). + * If @signal is %DEATH_REAP, this thread will self-reap. If @signal is + * %DEATH_DELAYED_GROUP_LEADER, this is a delayed_group_leader() zombie. + * The @death_cookie was passed back by tracehook_notify_death(). * * If normal reaping is not inhibited, @task->exit_state might be changing * in parallel. diff --git a/kernel/exit.c b/kernel/exit.c index eb4d6470d1d0..38ec40630149 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -911,10 +911,10 @@ static void exit_notify(struct task_struct *tsk, int group_dead) tsk->exit_signal = SIGCHLD; signal = tracehook_notify_death(tsk, &cookie, group_dead); - if (signal > 0) + if (signal >= 0) signal = do_notify_parent(tsk, signal); - tsk->exit_state = signal < 0 ? EXIT_DEAD : EXIT_ZOMBIE; + tsk->exit_state = signal == DEATH_REAP ? EXIT_DEAD : EXIT_ZOMBIE; /* mt-exec, de_thread() is waiting for us */ if (thread_group_leader(tsk) && @@ -927,7 +927,7 @@ static void exit_notify(struct task_struct *tsk, int group_dead) tracehook_report_death(tsk, signal, cookie, group_dead); /* If the process is dead, release it - nobody will wait for it */ - if (signal < 0) + if (signal == DEATH_REAP) release_task(tsk); } -- cgit v1.2.3 From 3b0de7b364c8b8a975f201fdae2fb394c876eb56 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Fri, 1 Aug 2008 14:19:08 -0500 Subject: add dependency of CONFIG_SGI_XP upon CONFIG_NET Add a dependency of CONFIG_SGI_XP upon CONFIG_NET to Kconfig. Signed-off-by: Dean Nelson Signed-off-by: Linus Torvalds --- drivers/misc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index fa50e9ede0e6..0db06f1f4b50 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -426,6 +426,7 @@ config ENCLOSURE_SERVICES config SGI_XP tristate "Support communication between SGI SSIs" + depends on NET depends on IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || (X86_64 && SMP) select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 -- cgit v1.2.3 From 46bd58eab21650fe820e4e3a27a6a134892cc2eb Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Fri, 1 Aug 2008 09:55:26 -0500 Subject: add reverse dependency of CONFIG_SGI_XP upon CONFIG_SGI_GRU Add a reverse dependency of CONFIG_SGI_XP upon CONFIG_SGI_GRU to Kconfig. Signed-off-by: Dean Nelson Signed-off-by: Linus Torvalds --- drivers/misc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 0db06f1f4b50..82af385460e4 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -430,6 +430,7 @@ config SGI_XP depends on IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || (X86_64 && SMP) select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 + select SGI_GRU if IA64_GENERIC || IA64_SGI_UV || (X86_64 && SMP) ---help--- An SGI machine can be divided into multiple Single System Images which act independently of each other and have -- cgit v1.2.3 From 0bacdf303f72a3ed34252934114bc04e79222687 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Wed, 30 Jul 2008 13:18:59 +0300 Subject: ath5k: Update register list * Update list of registers * Use updated register macros inside hw.c, initvals.c and debug.c Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/debug.c | 2 +- drivers/net/wireless/ath5k/hw.c | 43 +- drivers/net/wireless/ath5k/initvals.c | 4 +- drivers/net/wireless/ath5k/reg.h | 934 +++++++++++++++++++++++++--------- 4 files changed, 720 insertions(+), 263 deletions(-) diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 41d5fa34b544..6fa6c8e04ff0 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -129,7 +129,7 @@ static struct reg regs[] = { REG_STRUCT_INIT(AR5K_CPC1), REG_STRUCT_INIT(AR5K_CPC2), REG_STRUCT_INIT(AR5K_CPC3), - REG_STRUCT_INIT(AR5K_CPCORN), + REG_STRUCT_INIT(AR5K_CPCOVF), REG_STRUCT_INIT(AR5K_RESET_CTL), REG_STRUCT_INIT(AR5K_SLEEP_CTL), REG_STRUCT_INIT(AR5K_INTPEND), diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index 7ca87a557312..42ef41ed5d18 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -843,27 +843,26 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, * Write some more initial register settings */ if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0x0002a002, AR5K_PHY(11)); + ath5k_hw_reg_write(ah, 0x0002a002, 0x982c); if (channel->hw_value == CHANNEL_G) if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413) ath5k_hw_reg_write(ah, 0x00f80d80, - AR5K_PHY(83)); + 0x994c); else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424) ath5k_hw_reg_write(ah, 0x00380140, - AR5K_PHY(83)); + 0x994c); else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425) ath5k_hw_reg_write(ah, 0x00fc0ec0, - AR5K_PHY(83)); + 0x994c); else /* 2425 */ ath5k_hw_reg_write(ah, 0x00fc0fc0, - AR5K_PHY(83)); + 0x994c); else - ath5k_hw_reg_write(ah, 0x00000000, - AR5K_PHY(83)); + ath5k_hw_reg_write(ah, 0x00000000, 0x994c); ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); - ath5k_hw_reg_write(ah, 0x0000000f, 0x8060); + ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK); ath5k_hw_reg_write(ah, 0x00000000, 0xa254); ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL); } @@ -935,7 +934,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, return ret; /* Set antenna mode */ - AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x44), + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL, ah->ah_antenna[ee_mode][0], 0xfffffc06); /* @@ -965,15 +964,15 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, ath5k_hw_reg_write(ah, AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), - AR5K_PHY(0x5a)); + AR5K_PHY_NFTHRES); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x11), + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING, (ee->ee_switch_settling[ee_mode] << 7) & 0x3f80, 0xffffc07f); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x12), + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN, (ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000, 0xfffc0fff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x14), + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE, (ee->ee_adc_desired_size[ee_mode] & 0x00ff) | ((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00), 0xffff0000); @@ -982,13 +981,13 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, (ee->ee_tx_end2xpa_disable[ee_mode] << 24) | (ee->ee_tx_end2xpa_disable[ee_mode] << 16) | (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) | - (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY(0x0d)); + (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x0a), + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3, ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x19), + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF, (ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x49), 4, 0xffffff01); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01); AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE | @@ -3363,11 +3362,13 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) ath5k_hw_reg_write(ah, ah->ah_turbo ? AR5K_INIT_PROTO_TIME_CNTRL_TURBO : AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1); - /* Set PHY register 0x9844 (??) */ + /* Set AR5K_PHY_SETTLING */ ath5k_hw_reg_write(ah, ah->ah_turbo ? - (ath5k_hw_reg_read(ah, AR5K_PHY(17)) & ~0x7F) | 0x38 : - (ath5k_hw_reg_read(ah, AR5K_PHY(17)) & ~0x7F) | 0x1C, - AR5K_PHY(17)); + (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) + | 0x38 : + (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) + | 0x1C, + AR5K_PHY_SETTLING); /* Set Frame Control Register */ ath5k_hw_reg_write(ah, ah->ah_turbo ? (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE | diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c index 04c84e9da89d..2806b21bf90b 100644 --- a/drivers/net/wireless/ath5k/initvals.c +++ b/drivers/net/wireless/ath5k/initvals.c @@ -489,7 +489,7 @@ static const struct ath5k_ini ar5212_ini[] = { { AR5K_QUEUE_TXDP(9), 0x00000000 }, { AR5K_DCU_FP, 0x00000000 }, { AR5K_DCU_TXP, 0x00000000 }, - { AR5K_DCU_TX_FILTER, 0x00000000 }, + { AR5K_DCU_TX_FILTER_0_BASE, 0x00000000 }, /* Unknown table */ { 0x1078, 0x00000000 }, { 0x10b8, 0x00000000 }, @@ -679,7 +679,7 @@ static const struct ath5k_ini ar5212_ini[] = { { AR5K_PHY(645), 0x00106c10 }, { AR5K_PHY(646), 0x009c4060 }, { AR5K_PHY(647), 0x1483800a }, - /* { AR5K_PHY(648), 0x018830c6 },*/ /* 2413 */ + /* { AR5K_PHY(648), 0x018830c6 },*/ /* 2413/2425 */ { AR5K_PHY(648), 0x01831061 }, { AR5K_PHY(649), 0x00000400 }, /*{ AR5K_PHY(650), 0x000001b5 },*/ diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h index 30629b3e37c2..7562bf173d3e 100644 --- a/drivers/net/wireless/ath5k/reg.h +++ b/drivers/net/wireless/ath5k/reg.h @@ -53,7 +53,7 @@ #define AR5K_CR_TXD0 0x00000008 /* TX Disable for queue 0 on 5210 */ #define AR5K_CR_TXD1 0x00000010 /* TX Disable for queue 1 on 5210 */ #define AR5K_CR_RXD 0x00000020 /* RX Disable */ -#define AR5K_CR_SWI 0x00000040 +#define AR5K_CR_SWI 0x00000040 /* Software Interrupt */ /* * RX Descriptor Pointer register @@ -65,19 +65,19 @@ */ #define AR5K_CFG 0x0014 /* Register Address */ #define AR5K_CFG_SWTD 0x00000001 /* Byte-swap TX descriptor (for big endian archs) */ -#define AR5K_CFG_SWTB 0x00000002 /* Byte-swap TX buffer (?) */ +#define AR5K_CFG_SWTB 0x00000002 /* Byte-swap TX buffer */ #define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */ -#define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer (?) */ -#define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register values (?) */ -#define AR5K_CFG_ADHOC 0x00000020 /* [5211+] */ +#define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer */ +#define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register access */ +#define AR5K_CFG_ADHOC 0x00000020 /* AP/Adhoc indication [5211+] */ #define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */ #define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */ -#define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (?) */ +#define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (Disable dynamic clock) */ #define AR5K_CFG_TXCNT 0x00007800 /* Tx frame count (?) [5210] */ #define AR5K_CFG_TXCNT_S 11 #define AR5K_CFG_TXFSTAT 0x00008000 /* Tx frame status (?) [5210] */ #define AR5K_CFG_TXFSTRT 0x00010000 /* [5210] */ -#define AR5K_CFG_PCI_THRES 0x00060000 /* [5211+] */ +#define AR5K_CFG_PCI_THRES 0x00060000 /* PCI Master req q threshold [5211+] */ #define AR5K_CFG_PCI_THRES_S 17 /* @@ -162,35 +162,40 @@ /* * Transmit configuration register */ -#define AR5K_TXCFG 0x0030 /* Register Address */ -#define AR5K_TXCFG_SDMAMR 0x00000007 /* DMA size */ -#define AR5K_TXCFG_SDMAMR_S 0 -#define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */ -#define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */ -#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */ -#define AR5K_TXCFG_TXFULL_S 4 -#define AR5K_TXCFG_TXFULL_0B 0x00000000 -#define AR5K_TXCFG_TXFULL_64B 0x00000010 -#define AR5K_TXCFG_TXFULL_128B 0x00000020 -#define AR5K_TXCFG_TXFULL_192B 0x00000030 -#define AR5K_TXCFG_TXFULL_256B 0x00000040 -#define AR5K_TXCFG_TXCONT_EN 0x00000080 -#define AR5K_TXCFG_DMASIZE 0x00000100 /* Flag for passing DMA size [5210] */ -#define AR5K_TXCFG_JUMBO_TXE 0x00000400 /* Enable jumbo frames transmition (?) [5211+] */ -#define AR5K_TXCFG_RTSRND 0x00001000 /* [5211+] */ -#define AR5K_TXCFG_FRMPAD_DIS 0x00002000 /* [5211+] */ -#define AR5K_TXCFG_RDY_DIS 0x00004000 /* [5211+] */ +#define AR5K_TXCFG 0x0030 /* Register Address */ +#define AR5K_TXCFG_SDMAMR 0x00000007 /* DMA size (read) */ +#define AR5K_TXCFG_SDMAMR_S 0 +#define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */ +#define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */ +#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */ +#define AR5K_TXCFG_TXFULL_S 4 +#define AR5K_TXCFG_TXFULL_0B 0x00000000 +#define AR5K_TXCFG_TXFULL_64B 0x00000010 +#define AR5K_TXCFG_TXFULL_128B 0x00000020 +#define AR5K_TXCFG_TXFULL_192B 0x00000030 +#define AR5K_TXCFG_TXFULL_256B 0x00000040 +#define AR5K_TXCFG_TXCONT_EN 0x00000080 +#define AR5K_TXCFG_DMASIZE 0x00000100 /* Flag for passing DMA size [5210] */ +#define AR5K_TXCFG_JUMBO_DESC_EN 0x00000400 /* Enable jumbo tx descriptors [5211+] */ +#define AR5K_TXCFG_ADHOC_BCN_ATIM 0x00000800 /* Adhoc Beacon ATIM Policy */ +#define AR5K_TXCFG_ATIM_WINDOW_DEF_DIS 0x00001000 /* Disable ATIM window defer [5211+] */ +#define AR5K_TXCFG_RTSRND 0x00001000 /* [5211+] */ +#define AR5K_TXCFG_FRMPAD_DIS 0x00002000 /* [5211+] */ +#define AR5K_TXCFG_RDY_CBR_DIS 0x00004000 /* Ready time CBR disable [5211+] */ +#define AR5K_TXCFG_JUMBO_FRM_MODE 0x00008000 /* Jumbo frame mode [5211+] */ +#define AR5K_TXCFG_DCU_CACHING_DIS 0x00010000 /* Disable DCU caching */ /* * Receive configuration register */ #define AR5K_RXCFG 0x0034 /* Register Address */ -#define AR5K_RXCFG_SDMAMW 0x00000007 /* DMA size */ +#define AR5K_RXCFG_SDMAMW 0x00000007 /* DMA size (write) */ #define AR5K_RXCFG_SDMAMW_S 0 -#define AR5K_RXCFG_DEF_ANTENNA 0x00000008 /* Default antenna */ -#define AR5K_RXCFG_ZLFDMA 0x00000010 /* Zero-length DMA */ -#define AR5K_RXCFG_JUMBO_RXE 0x00000020 /* Enable jumbo frames reception (?) [5211+] */ -#define AR5K_RXCFG_JUMBO_WRAP 0x00000040 /* Wrap jumbo frames (?) [5211+] */ +#define AR5K_RXCFG_ZLFDMA 0x00000008 /* Enable Zero-length frame DMA */ +#define AR5K_RXCFG_DEF_ANTENNA 0x00000010 /* Default antenna (?) */ +#define AR5K_RXCFG_JUMBO_RXE 0x00000020 /* Enable jumbo rx descriptors [5211+] */ +#define AR5K_RXCFG_JUMBO_WRAP 0x00000040 /* Wrap jumbo frames [5211+] */ +#define AR5K_RXCFG_SLE_ENTRY 0x00000080 /* Sleep entry policy */ /* * Receive jumbo descriptor last address register @@ -202,35 +207,35 @@ * MIB control register */ #define AR5K_MIBC 0x0040 /* Register Address */ -#define AR5K_MIBC_COW 0x00000001 -#define AR5K_MIBC_FMC 0x00000002 /* Freeze Mib Counters (?) */ -#define AR5K_MIBC_CMC 0x00000004 /* Clean Mib Counters (?) */ -#define AR5K_MIBC_MCS 0x00000008 +#define AR5K_MIBC_COW 0x00000001 /* Warn test indicator */ +#define AR5K_MIBC_FMC 0x00000002 /* Freeze MIB Counters */ +#define AR5K_MIBC_CMC 0x00000004 /* Clean MIB Counters */ +#define AR5K_MIBC_MCS 0x00000008 /* MIB counter strobe */ /* * Timeout prescale register */ #define AR5K_TOPS 0x0044 -#define AR5K_TOPS_M 0x0000ffff /* [5211+] (?) */ +#define AR5K_TOPS_M 0x0000ffff /* * Receive timeout register (no frame received) */ #define AR5K_RXNOFRM 0x0048 -#define AR5K_RXNOFRM_M 0x000003ff /* [5211+] (?) */ +#define AR5K_RXNOFRM_M 0x000003ff /* * Transmit timeout register (no frame sent) */ #define AR5K_TXNOFRM 0x004c -#define AR5K_TXNOFRM_M 0x000003ff /* [5211+] (?) */ -#define AR5K_TXNOFRM_QCU 0x000ffc00 /* [5211+] (?) */ +#define AR5K_TXNOFRM_M 0x000003ff +#define AR5K_TXNOFRM_QCU 0x000ffc00 /* * Receive frame gap timeout register */ #define AR5K_RPGTO 0x0050 -#define AR5K_RPGTO_M 0x000003ff /* [5211+] (?) */ +#define AR5K_RPGTO_M 0x000003ff /* * Receive frame count limit register @@ -241,6 +246,7 @@ /* * Misc settings register + * (reserved0-3) */ #define AR5K_MISC 0x0058 /* Register Address */ #define AR5K_MISC_DMA_OBS_M 0x000001e0 @@ -256,6 +262,7 @@ /* * QCU/DCU clock gating register (5311) + * (reserved4-5) */ #define AR5K_QCUDCU_CLKGT 0x005c /* Register Address (?) */ #define AR5K_QCUDCU_CLKGT_QCU 0x0000ffff /* Mask for QCU clock */ @@ -284,18 +291,18 @@ #define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */ #define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */ #define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */ -#define AR5K_ISR_SWI 0x00002000 /* Software interrupt (?) */ +#define AR5K_ISR_SWI 0x00002000 /* Software interrupt */ #define AR5K_ISR_RXPHY 0x00004000 /* PHY error */ -#define AR5K_ISR_RXKCM 0x00008000 +#define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */ #define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */ #define AR5K_ISR_BRSSI 0x00020000 #define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */ #define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ #define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ -#define AR5K_ISR_MCABT 0x00100000 /* [5210] */ -#define AR5K_ISR_RXCHIRP 0x00200000 /* [5212+] */ -#define AR5K_ISR_SSERR 0x00200000 /* [5210] */ -#define AR5K_ISR_DPERR 0x00400000 /* [5210] */ +#define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ +#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */ +#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */ +#define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */ #define AR5K_ISR_TIM 0x00800000 /* [5210] */ #define AR5K_ISR_BCNMISC 0x00800000 /* [5212+] */ #define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill)*/ @@ -320,14 +327,14 @@ #define AR5K_SISR2 0x008c /* Register Address [5211+] */ #define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ -#define AR5K_SISR2_MCABT 0x00100000 -#define AR5K_SISR2_SSERR 0x00200000 -#define AR5K_SISR2_DPERR 0x00400000 +#define AR5K_SISR2_MCABT 0x00100000 /* Master Cycle Abort */ +#define AR5K_SISR2_SSERR 0x00200000 /* Signaled System Error */ +#define AR5K_SISR2_DPERR 0x00400000 /* Det par Error (?) */ #define AR5K_SISR2_TIM 0x01000000 /* [5212+] */ #define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */ -#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* [5212+] */ -#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* [5212+] */ -#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* [5212+] */ +#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */ +#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ +#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ #define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */ #define AR5K_SISR3 0x0090 /* Register Address [5211+] */ @@ -368,18 +375,18 @@ #define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/ #define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/ #define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/ -#define AR5K_IMR_SWI 0x00002000 +#define AR5K_IMR_SWI 0x00002000 /* Software interrupt */ #define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/ -#define AR5K_IMR_RXKCM 0x00008000 +#define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */ #define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/ #define AR5K_IMR_BRSSI 0x00020000 #define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/ #define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ #define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */ -#define AR5K_IMR_MCABT 0x00100000 /* [5210] */ -#define AR5K_IMR_RXCHIRP 0x00200000 /* [5212+]*/ -#define AR5K_IMR_SSERR 0x00200000 /* [5210] */ -#define AR5K_IMR_DPERR 0x00400000 /* [5210] */ +#define AR5K_IMR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ +#define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/ +#define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */ +#define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */ #define AR5K_IMR_TIM 0x00800000 /* [5211+] */ #define AR5K_IMR_BCNMISC 0x00800000 /* [5212+] */ #define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/ @@ -405,14 +412,14 @@ #define AR5K_SIMR2 0x00ac /* Register Address [5211+] */ #define AR5K_SIMR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ #define AR5K_SIMR2_QCU_TXURN_S 0 -#define AR5K_SIMR2_MCABT 0x00100000 -#define AR5K_SIMR2_SSERR 0x00200000 -#define AR5K_SIMR2_DPERR 0x00400000 +#define AR5K_SIMR2_MCABT 0x00100000 /* Master Cycle Abort */ +#define AR5K_SIMR2_SSERR 0x00200000 /* Signaled System Error */ +#define AR5K_SIMR2_DPERR 0x00400000 /* Det par Error (?) */ #define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */ #define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */ -#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* [5212+] */ -#define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* [5212+] */ -#define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* [5212+] */ +#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */ +#define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ +#define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ #define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */ #define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */ @@ -425,23 +432,69 @@ #define AR5K_SIMR4_QTRIG 0x000003ff /* Mask for QTRIG */ #define AR5K_SIMR4_QTRIG_S 0 +/* + * DMA Debug registers 0-7 + * 0xe0 - 0xfc + */ /* * Decompression mask registers [5212+] */ -#define AR5K_DCM_ADDR 0x0400 /*Decompression mask address (?)*/ -#define AR5K_DCM_DATA 0x0404 /*Decompression mask data (?)*/ +#define AR5K_DCM_ADDR 0x0400 /*Decompression mask address (index) */ +#define AR5K_DCM_DATA 0x0404 /*Decompression mask data */ + +/* + * Wake On Wireless pattern control register [5212+] + */ +#define AR5K_WOW_PCFG 0x0410 /* Register Address */ +#define AR5K_WOW_PCFG_PAT_MATCH_EN 0x00000001 /* Pattern match enable */ +#define AR5K_WOW_PCFG_LONG_FRAME_POL 0x00000002 /* Long frame policy */ +#define AR5K_WOW_PCFG_WOBMISS 0x00000004 /* Wake on bea(con) miss (?) */ +#define AR5K_WOW_PCFG_PAT_0_EN 0x00000100 /* Enable pattern 0 */ +#define AR5K_WOW_PCFG_PAT_1_EN 0x00000200 /* Enable pattern 1 */ +#define AR5K_WOW_PCFG_PAT_2_EN 0x00000400 /* Enable pattern 2 */ +#define AR5K_WOW_PCFG_PAT_3_EN 0x00000800 /* Enable pattern 3 */ +#define AR5K_WOW_PCFG_PAT_4_EN 0x00001000 /* Enable pattern 4 */ +#define AR5K_WOW_PCFG_PAT_5_EN 0x00002000 /* Enable pattern 5 */ + +/* + * Wake On Wireless pattern index register (?) [5212+] + */ +#define AR5K_WOW_PAT_IDX 0x0414 + +/* + * Wake On Wireless pattern data register [5212+] + */ +#define AR5K_WOW_PAT_DATA 0x0418 /* Register Address */ +#define AR5K_WOW_PAT_DATA_0_3_V 0x00000001 /* Pattern 0, 3 value */ +#define AR5K_WOW_PAT_DATA_1_4_V 0x00000100 /* Pattern 1, 4 value */ +#define AR5K_WOW_PAT_DATA_2_5_V 0x00010000 /* Pattern 2, 5 value */ +#define AR5K_WOW_PAT_DATA_0_3_M 0x01000000 /* Pattern 0, 3 mask */ +#define AR5K_WOW_PAT_DATA_1_4_M 0x04000000 /* Pattern 1, 4 mask */ +#define AR5K_WOW_PAT_DATA_2_5_M 0x10000000 /* Pattern 2, 5 mask */ /* * Decompression configuration registers [5212+] */ -#define AR5K_DCCFG 0x0420 +#define AR5K_DCCFG 0x0420 /* Register Address */ +#define AR5K_DCCFG_GLOBAL_EN 0x00000001 /* Enable decompression on all queues */ +#define AR5K_DCCFG_BYPASS_EN 0x00000002 /* Bypass decompression */ +#define AR5K_DCCFG_BCAST_EN 0x00000004 /* Enable decompression for bcast frames */ +#define AR5K_DCCFG_MCAST_EN 0x00000008 /* Enable decompression for mcast frames */ /* * Compression configuration registers [5212+] */ -#define AR5K_CCFG 0x0600 -#define AR5K_CCFG_CUP 0x0604 +#define AR5K_CCFG 0x0600 /* Register Address */ +#define AR5K_CCFG_WINDOW_SIZE 0x00000007 /* Compression window size */ +#define AR5K_CCFG_CPC_EN 0x00000008 /* Enable performance counters */ + +#define AR5K_CCFG_CCU 0x0604 /* Register Address */ +#define AR5K_CCFG_CCU_CUP_EN 0x00000001 /* CCU Catchup enable */ +#define AR5K_CCFG_CCU_CREDIT 0x00000002 /* CCU Credit (field) */ +#define AR5K_CCFG_CCU_CD_THRES 0x00000080 /* CCU Cyc(lic?) debt threshold (field) */ +#define AR5K_CCFG_CCU_CUP_LCNT 0x00010000 /* CCU Catchup lit(?) count */ +#define AR5K_CCFG_CCU_INIT 0x00100200 /* Initial value during reset */ /* * Compression performance counter registers [5212+] @@ -450,7 +503,7 @@ #define AR5K_CPC1 0x0614 /* Compression performance counter 1*/ #define AR5K_CPC2 0x0618 /* Compression performance counter 2 */ #define AR5K_CPC3 0x061c /* Compression performance counter 3 */ -#define AR5K_CPCORN 0x0620 /* Compression performance overrun (?) */ +#define AR5K_CPCOVF 0x0620 /* Compression performance overflow */ /* @@ -466,8 +519,6 @@ * set/clear, which contain status for all queues (we shift by 1 for each * queue). To access these registers easily we define some macros here * that are used inside HAL. For more infos check out *_tx_queue functs. - * - * TODO: Boundary checking on macros (here?) */ /* @@ -513,7 +564,6 @@ #define AR5K_QCU_RDYTIMECFG_BASE 0x0900 /* Register Address - Queue0 RDYTIMECFG */ #define AR5K_QCU_RDYTIMECFG_INTVAL 0x00ffffff /* Ready time interval mask */ #define AR5K_QCU_RDYTIMECFG_INTVAL_S 0 -#define AR5K_QCU_RDYTIMECFG_DURATION 0x00ffffff /* Ready time duration mask */ #define AR5K_QCU_RDYTIMECFG_ENABLE 0x01000000 /* Ready time enable mask */ #define AR5K_QUEUE_RDYTIMECFG(_q) AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q) @@ -534,19 +584,20 @@ */ #define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */ #define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */ -#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ -#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ -#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated (?) */ -#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* Time gated (?) */ +#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ +#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ +#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated (?) */ +#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* Time gated (?) */ #define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated (?) */ #define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */ #define AR5K_QCU_MISC_CBREXP 0x00000020 /* CBR expired (normal queue) */ #define AR5K_QCU_MISC_CBREXP_BCN 0x00000040 /* CBR expired (beacon queue) */ -#define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Beacons enabled */ -#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR threshold enabled (?) */ -#define AR5K_QCU_MISC_TXE 0x00000200 /* TXE reset when RDYTIME enalbed (?) */ -#define AR5K_QCU_MISC_CBR 0x00000400 /* CBR threshold reset (?) */ -#define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU reset (?) */ +#define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */ +#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR threshold enabled */ +#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME enalbed */ +#define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */ +#define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */ +#define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */ #define AR5K_QUEUE_MISC(_q) AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q) @@ -555,7 +606,7 @@ */ #define AR5K_QCU_STS_BASE 0x0a00 /* Register Address - Queue0 STS */ #define AR5K_QCU_STS_FRMPENDCNT 0x00000003 /* Frames pending counter */ -#define AR5K_QCU_STS_CBREXPCNT 0x0000ff00 /* CBR expired counter (?) */ +#define AR5K_QCU_STS_CBREXPCNT 0x0000ff00 /* CBR expired counter */ #define AR5K_QUEUE_STATUS(_q) AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q) /* @@ -569,9 +620,11 @@ */ #define AR5K_QCU_CBB_SELECT 0x0b00 #define AR5K_QCU_CBB_ADDR 0x0b04 +#define AR5K_QCU_CBB_ADDR_S 9 /* * QCU compression buffer configuration register [5212+] + * (buffer size) */ #define AR5K_QCU_CBCFG 0x0b08 @@ -652,80 +705,100 @@ * No lockout means there is no special handling. */ #define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */ -#define AR5K_DCU_MISC_BACKOFF 0x000007ff /* Mask for backoff setting (?) */ +#define AR5K_DCU_MISC_BACKOFF 0x000007ff /* Mask for backoff threshold */ #define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */ -#define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll (?) */ -#define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff (?) */ -#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch (?) */ +#define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */ +#define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */ +#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */ #define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */ -#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0 -#define AR5K_DCU_MISC_VIRTCOL_MODIFIED 1 -#define AR5K_DCU_MISC_VIRTCOL_IGNORE 2 -#define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Beacon enable (?) */ +#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0 +#define AR5K_DCU_MISC_VIRTCOL_MODIFIED 1 +#define AR5K_DCU_MISC_VIRTCOL_IGNORE 2 +#define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */ #define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */ #define AR5K_DCU_MISC_ARBLOCK_CTL_S 17 -#define AR5K_DCU_MISC_ARBLOCK_CTL_NONE 0 /* No arbiter lockout */ +#define AR5K_DCU_MISC_ARBLOCK_CTL_NONE 0 /* No arbiter lockout */ #define AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM 1 /* Intra-frame lockout */ #define AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL 2 /* Global lockout */ -#define AR5K_DCU_MISC_ARBLOCK_IGNORE 0x00080000 -#define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS 0x00100000 /* Disable sequence number increment (?) */ -#define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000 /* Disable post-frame backoff (?) */ -#define AR5K_DCU_MISC_VIRT_COLL_POLICY 0x00400000 /* Virtual Collision policy (?) */ -#define AR5K_DCU_MISC_BLOWN_IFS_POLICY 0x00800000 +#define AR5K_DCU_MISC_ARBLOCK_IGNORE 0x00080000 /* Ignore Arbiter lockout */ +#define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS 0x00100000 /* Disable sequence number increment */ +#define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000 /* Disable post-frame backoff */ +#define AR5K_DCU_MISC_VIRT_COLL_POLICY 0x00400000 /* Virtual Collision cw policy */ +#define AR5K_DCU_MISC_BLOWN_IFS_POLICY 0x00800000 /* Blown IFS policy (?) */ #define AR5K_DCU_MISC_SEQNUM_CTL 0x01000000 /* Sequence number control (?) */ #define AR5K_QUEUE_DFS_MISC(_q) AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q) /* * DCU frame sequence number registers */ -#define AR5K_DCU_SEQNUM_BASE 0x1140 -#define AR5K_DCU_SEQNUM_M 0x00000fff +#define AR5K_DCU_SEQNUM_BASE 0x1140 +#define AR5K_DCU_SEQNUM_M 0x00000fff #define AR5K_QUEUE_DFS_SEQNUM(_q) AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q) /* - * DCU global IFS SIFS registers + * DCU global IFS SIFS register */ #define AR5K_DCU_GBL_IFS_SIFS 0x1030 #define AR5K_DCU_GBL_IFS_SIFS_M 0x0000ffff /* - * DCU global IFS slot interval registers + * DCU global IFS slot interval register */ #define AR5K_DCU_GBL_IFS_SLOT 0x1070 #define AR5K_DCU_GBL_IFS_SLOT_M 0x0000ffff /* - * DCU global IFS EIFS registers + * DCU global IFS EIFS register */ #define AR5K_DCU_GBL_IFS_EIFS 0x10b0 #define AR5K_DCU_GBL_IFS_EIFS_M 0x0000ffff /* - * DCU global IFS misc registers + * DCU global IFS misc register + * + * LFSR stands for Linear Feedback Shift Register + * and it's used for generating pseudo-random + * number sequences. + * + * (If i understand corectly, random numbers are + * used for idle sensing -multiplied with cwmin/max etc-) */ #define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */ -#define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE 0x00000007 -#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode (?) */ -#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask (?) */ -#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 -#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 +#define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE 0x00000007 /* LFSR Slice Select */ +#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */ +#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */ +#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */ +#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */ +#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFC cnt reset policy (?) */ +#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */ +#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */ /* * DCU frame prefetch control register */ -#define AR5K_DCU_FP 0x1230 +#define AR5K_DCU_FP 0x1230 /* Register Address */ +#define AR5K_DCU_FP_NOBURST_DCU_EN 0x00000001 /* Enable non-burst prefetch on DCU (?) */ +#define AR5K_DCU_FP_NOBURST_EN 0x00000010 /* Enable non-burst prefetch (?) */ +#define AR5K_DCU_FP_BURST_DCU_EN 0x00000020 /* Enable burst prefetch on DCU (?) */ /* * DCU transmit pause control/status register */ #define AR5K_DCU_TXP 0x1270 /* Register Address */ -#define AR5K_DCU_TXP_M 0x000003ff /* Tx pause mask (?) */ -#define AR5K_DCU_TXP_STATUS 0x00010000 /* Tx pause status (?) */ +#define AR5K_DCU_TXP_M 0x000003ff /* Tx pause mask */ +#define AR5K_DCU_TXP_STATUS 0x00010000 /* Tx pause status */ + +/* + * DCU transmit filter table 0 (32 entries) + */ +#define AR5K_DCU_TX_FILTER_0_BASE 0x1038 +#define AR5K_DCU_TX_FILTER_0(_n) (AR5K_DCU_TX_FILTER_0_BASE + (_n * 64)) /* - * DCU transmit filter register + * DCU transmit filter table 1 (16 entries) */ -#define AR5K_DCU_TX_FILTER 0x1038 +#define AR5K_DCU_TX_FILTER_1_BASE 0x103c +#define AR5K_DCU_TX_FILTER_1(_n) (AR5K_DCU_TX_FILTER_1_BASE + ((_n - 32) * 64)) /* * DCU clear transmit filter register @@ -739,9 +812,6 @@ /* * Reset control register - * - * 4 and 8 are not used in 5211/5212 and - * 2 means "baseband reset" on 5211/5212. */ #define AR5K_RESET_CTL 0x4000 /* Register Address */ #define AR5K_RESET_CTL_PCU 0x00000001 /* Protocol Control Unit reset */ @@ -765,6 +835,7 @@ #define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */ #define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 #define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */ +/* more bits */ /* * Interrupt pending register @@ -776,13 +847,14 @@ * Sleep force register */ #define AR5K_SFR 0x400c -#define AR5K_SFR_M 0x00000001 +#define AR5K_SFR_EN 0x00000001 /* * PCI configuration register */ #define AR5K_PCICFG 0x4010 /* Register Address */ #define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */ +#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock (?) */ #define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */ #define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */ #define AR5K_PCICFG_EESIZE_S 3 @@ -798,19 +870,21 @@ #define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix (?) */ #define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep (?) */ #define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */ -#define AR5K_PCICFG_SL_INPEN 0x00002800 /* Sleep even whith pending interrupts (?) */ +#define AR5K_PCICFG_UNK 0x00001000 /* Passed on some parts durring attach (?) */ +#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts (?) */ #define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */ #define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */ #define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */ #define AR5K_PCICFG_LEDMODE_PROM 0x00020000 /* Default mode (blink on any traffic) [5211+] */ #define AR5K_PCICFG_LEDMODE_PWR 0x00040000 /* Some other blinking mode (?) [5211+] */ #define AR5K_PCICFG_LEDMODE_RAND 0x00060000 /* Random blinking (?) [5211+] */ -#define AR5K_PCICFG_LEDBLINK 0x00700000 +#define AR5K_PCICFG_LEDBLINK 0x00700000 /* Led blink rate */ #define AR5K_PCICFG_LEDBLINK_S 20 -#define AR5K_PCICFG_LEDSLOW 0x00800000 /* Slow led blink rate (?) [5211+] */ +#define AR5K_PCICFG_LEDSLOW 0x00800000 /* Slowest led blink rate [5211+] */ #define AR5K_PCICFG_LEDSTATE \ (AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \ AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW) +#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate (field) */ /* * "General Purpose Input/Output" (GPIO) control register @@ -947,7 +1021,7 @@ #define AR5K_EEPROM_VERSION_4_4 0x4004 #define AR5K_EEPROM_VERSION_4_5 0x4005 #define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */ -#define AR5K_EEPROM_VERSION_4_7 0x3007 +#define AR5K_EEPROM_VERSION_4_7 0x4007 #define AR5K_EEPROM_MODE_11A 0 #define AR5K_EEPROM_MODE_11B 1 @@ -1023,10 +1097,14 @@ #define AR5K_EEPROM_STAT_WRDONE 0x00000008 /* EEPROM write successful */ /* - * EEPROM config register (?) + * EEPROM config register */ -#define AR5K_EEPROM_CFG 0x6010 - +#define AR5K_EEPROM_CFG 0x6010 /* Register Addres */ +#define AR5K_EEPROM_CFG_SIZE_OVR 0x00000001 +#define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */ +#define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */ +#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protectio key */ +#define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */ /* @@ -1050,7 +1128,7 @@ #define AR5K_STA_ID1 0x8004 /* Register Address */ #define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */ #define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */ -#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting (?) */ +#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */ #define AR5K_STA_ID1_NO_KEYSRCH 0x00080000 /* No key search */ #define AR5K_STA_ID1_NO_PSPOLL 0x00100000 /* No power save polling [5210] */ #define AR5K_STA_ID1_PCF_5211 0x00100000 /* Enable PCF on [5211+] */ @@ -1059,9 +1137,13 @@ AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211) #define AR5K_STA_ID1_DEFAULT_ANTENNA 0x00200000 /* Use default antenna */ #define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */ -#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS (?) */ -#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS (?) */ +#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */ +#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS */ #define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate (for ACK/CTS ?) [5211+] */ +#define AR5K_STA_ID1_SELF_GEN_SECTORE 0x04000000 /* Self generate sectore (?) */ +#define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */ +#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Keysearch mode (?) */ +#define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */ /* * First BSSID register (MAC address, lower 32bits) @@ -1117,7 +1199,7 @@ * * Retry limit register for 5210 (no QCU/DCU so it's done in PCU) */ -#define AR5K_NODCU_RETRY_LMT 0x801c /*Register Address */ +#define AR5K_NODCU_RETRY_LMT 0x801c /* Register Address */ #define AR5K_NODCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */ #define AR5K_NODCU_RETRY_LMT_SH_RETRY_S 0 #define AR5K_NODCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry mask */ @@ -1136,9 +1218,9 @@ #define AR5K_USEC_5211 0x801c /* Register Address [5211+] */ #define AR5K_USEC (ah->ah_version == AR5K_AR5210 ? \ AR5K_USEC_5210 : AR5K_USEC_5211) -#define AR5K_USEC_1 0x0000007f +#define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */ #define AR5K_USEC_1_S 0 -#define AR5K_USEC_32 0x00003f80 +#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32Mhz clock */ #define AR5K_USEC_32_S 7 #define AR5K_USEC_TX_LATENCY_5211 0x007fc000 #define AR5K_USEC_TX_LATENCY_5211_S 14 @@ -1152,16 +1234,16 @@ /* * PCU beacon control register */ -#define AR5K_BEACON_5210 0x8024 -#define AR5K_BEACON_5211 0x8020 +#define AR5K_BEACON_5210 0x8024 /*Register Address [5210] */ +#define AR5K_BEACON_5211 0x8020 /*Register Address [5211+] */ #define AR5K_BEACON (ah->ah_version == AR5K_AR5210 ? \ AR5K_BEACON_5210 : AR5K_BEACON_5211) -#define AR5K_BEACON_PERIOD 0x0000ffff +#define AR5K_BEACON_PERIOD 0x0000ffff /* Mask for beacon period */ #define AR5K_BEACON_PERIOD_S 0 -#define AR5K_BEACON_TIM 0x007f0000 +#define AR5K_BEACON_TIM 0x007f0000 /* Mask for TIM offset */ #define AR5K_BEACON_TIM_S 16 -#define AR5K_BEACON_ENABLE 0x00800000 -#define AR5K_BEACON_RESET_TSF 0x01000000 +#define AR5K_BEACON_ENABLE 0x00800000 /* Enable beacons */ +#define AR5K_BEACON_RESET_TSF 0x01000000 /* Force TSF reset */ /* * CFP period register @@ -1234,7 +1316,6 @@ /* * Receive filter register - * TODO: Get these out of ar5xxx.h on ath5k */ #define AR5K_RX_FILTER_5210 0x804c /* Register Address [5210] */ #define AR5K_RX_FILTER_5211 0x803c /* Register Address [5211+] */ @@ -1307,11 +1388,11 @@ #define AR5K_DIAG_SW_5211 0x8048 /* Register Address [5211+] */ #define AR5K_DIAG_SW (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211) -#define AR5K_DIAG_SW_DIS_WEP_ACK 0x00000001 -#define AR5K_DIAG_SW_DIS_ACK 0x00000002 /* Disable ACKs (?) */ -#define AR5K_DIAG_SW_DIS_CTS 0x00000004 /* Disable CTSs (?) */ -#define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable encryption (?) */ -#define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable decryption (?) */ +#define AR5K_DIAG_SW_DIS_WEP_ACK 0x00000001 /* Disable ACKs if WEP key is invalid */ +#define AR5K_DIAG_SW_DIS_ACK 0x00000002 /* Disable ACKs */ +#define AR5K_DIAG_SW_DIS_CTS 0x00000004 /* Disable CTSs */ +#define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable encryption */ +#define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable decryption */ #define AR5K_DIAG_SW_DIS_TX 0x00000020 /* Disable transmit [5210] */ #define AR5K_DIAG_SW_DIS_RX_5210 0x00000040 /* Disable recieve */ #define AR5K_DIAG_SW_DIS_RX_5211 0x00000020 @@ -1329,13 +1410,13 @@ #define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100 #define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211) -#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 /* Scrambler seed (?) */ +#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 /* Enable scrambler seed */ #define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 #define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211) #define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */ #define AR5K_DIAG_SW_SCVRAM_SEED 0x0003f800 /* [5210] */ -#define AR5K_DIAG_SW_SCRAM_SEED_M 0x0001fc00 /* Scrambler seed mask (?) */ +#define AR5K_DIAG_SW_SCRAM_SEED_M 0x0001fc00 /* Scrambler seed mask */ #define AR5K_DIAG_SW_SCRAM_SEED_S 10 #define AR5K_DIAG_SW_DIS_SEQ_INC 0x00040000 /* Disable seqnum increment (?)[5210] */ #define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000 @@ -1344,6 +1425,7 @@ AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211) #define AR5K_DIAG_SW_OBSPT_M 0x000c0000 #define AR5K_DIAG_SW_OBSPT_S 18 +/* more bits */ /* * TSF (clock) register (lower 32 bits) @@ -1369,15 +1451,34 @@ /* * ADDAC test register [5211+] */ -#define AR5K_ADDAC_TEST 0x8054 -#define AR5K_ADDAC_TEST_TXCONT 0x00000001 +#define AR5K_ADDAC_TEST 0x8054 /* Register Address */ +#define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */ +#define AR5K_ADDAC_TEST_TST_MODE 0x00000002 /* Test mode */ +#define AR5K_ADDAC_TEST_LOOP_EN 0x00000004 /* Enable loop */ +#define AR5K_ADDAC_TEST_LOOP_LEN 0x00000008 /* Loop length (field) */ +#define AR5K_ADDAC_TEST_USE_U8 0x00004000 /* Use upper 8 bits */ +#define AR5K_ADDAC_TEST_MSB 0x00008000 /* State of MSB */ +#define AR5K_ADDAC_TEST_TRIG_SEL 0x00010000 /* Trigger select */ +#define AR5K_ADDAC_TEST_TRIG_PTY 0x00020000 /* Trigger polarity */ +#define AR5K_ADDAC_TEST_RXCONT 0x00040000 /* Continuous capture */ +#define AR5K_ADDAC_TEST_CAPTURE 0x00080000 /* Begin capture */ +#define AR5K_ADDAC_TEST_TST_ARM 0x00100000 /* Test ARM (Adaptive Radio Mode ?) */ /* * Default antenna register [5211+] */ #define AR5K_DEFAULT_ANTENNA 0x8058 +/* + * Frame control QoS mask register (?) [5211+] + * (FC_QOS_MASK) + */ +#define AR5K_FRAME_CTL_QOSM 0x805c +/* + * Seq mask register (?) [5211+] + */ +#define AR5K_SEQ_MASK 0x8060 /* * Retry count register [5210] @@ -1449,124 +1550,242 @@ /* * XR (eXtended Range) mode register */ -#define AR5K_XRMODE 0x80c0 -#define AR5K_XRMODE_POLL_TYPE_M 0x0000003f +#define AR5K_XRMODE 0x80c0 /* Register Address */ +#define AR5K_XRMODE_POLL_TYPE_M 0x0000003f /* Mask for Poll type (?) */ #define AR5K_XRMODE_POLL_TYPE_S 0 -#define AR5K_XRMODE_POLL_SUBTYPE_M 0x0000003c +#define AR5K_XRMODE_POLL_SUBTYPE_M 0x0000003c /* Mask for Poll subtype (?) */ #define AR5K_XRMODE_POLL_SUBTYPE_S 2 -#define AR5K_XRMODE_POLL_WAIT_ALL 0x00000080 -#define AR5K_XRMODE_SIFS_DELAY 0x000fff00 -#define AR5K_XRMODE_FRAME_HOLD_M 0xfff00000 +#define AR5K_XRMODE_POLL_WAIT_ALL 0x00000080 /* Wait for poll */ +#define AR5K_XRMODE_SIFS_DELAY 0x000fff00 /* Mask for SIFS delay */ +#define AR5K_XRMODE_FRAME_HOLD_M 0xfff00000 /* Mask for frame hold (?) */ #define AR5K_XRMODE_FRAME_HOLD_S 20 /* * XR delay register */ -#define AR5K_XRDELAY 0x80c4 -#define AR5K_XRDELAY_SLOT_DELAY_M 0x0000ffff +#define AR5K_XRDELAY 0x80c4 /* Register Address */ +#define AR5K_XRDELAY_SLOT_DELAY_M 0x0000ffff /* Mask for slot delay */ #define AR5K_XRDELAY_SLOT_DELAY_S 0 -#define AR5K_XRDELAY_CHIRP_DELAY_M 0xffff0000 +#define AR5K_XRDELAY_CHIRP_DELAY_M 0xffff0000 /* Mask for CHIRP data delay */ #define AR5K_XRDELAY_CHIRP_DELAY_S 16 /* * XR timeout register */ -#define AR5K_XRTIMEOUT 0x80c8 -#define AR5K_XRTIMEOUT_CHIRP_M 0x0000ffff +#define AR5K_XRTIMEOUT 0x80c8 /* Register Address */ +#define AR5K_XRTIMEOUT_CHIRP_M 0x0000ffff /* Mask for CHIRP timeout */ #define AR5K_XRTIMEOUT_CHIRP_S 0 -#define AR5K_XRTIMEOUT_POLL_M 0xffff0000 +#define AR5K_XRTIMEOUT_POLL_M 0xffff0000 /* Mask for Poll timeout */ #define AR5K_XRTIMEOUT_POLL_S 16 /* * XR chirp register */ -#define AR5K_XRCHIRP 0x80cc -#define AR5K_XRCHIRP_SEND 0x00000001 -#define AR5K_XRCHIRP_GAP 0xffff0000 +#define AR5K_XRCHIRP 0x80cc /* Register Address */ +#define AR5K_XRCHIRP_SEND 0x00000001 /* Send CHIRP */ +#define AR5K_XRCHIRP_GAP 0xffff0000 /* Mask for CHIRP gap (?) */ /* * XR stomp register */ -#define AR5K_XRSTOMP 0x80d0 -#define AR5K_XRSTOMP_TX 0x00000001 -#define AR5K_XRSTOMP_RX_ABORT 0x00000002 -#define AR5K_XRSTOMP_RSSI_THRES 0x0000ff00 +#define AR5K_XRSTOMP 0x80d0 /* Register Address */ +#define AR5K_XRSTOMP_TX 0x00000001 /* Stomp Tx (?) */ +#define AR5K_XRSTOMP_RX 0x00000002 /* Stomp Rx (?) */ +#define AR5K_XRSTOMP_TX_RSSI 0x00000004 /* Stomp Tx RSSI (?) */ +#define AR5K_XRSTOMP_TX_BSSID 0x00000008 /* Stomp Tx BSSID (?) */ +#define AR5K_XRSTOMP_DATA 0x00000010 /* Stomp data (?)*/ +#define AR5K_XRSTOMP_RSSI_THRES 0x0000ff00 /* Mask for XR RSSI threshold */ /* * First enhanced sleep register */ -#define AR5K_SLEEP0 0x80d4 -#define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff +#define AR5K_SLEEP0 0x80d4 /* Register Address */ +#define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */ #define AR5K_SLEEP0_NEXT_DTIM_S 0 -#define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 -#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 -#define AR5K_SLEEP0_CABTO 0xff000000 +#define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */ +#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enchanced sleep control */ +#define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */ #define AR5K_SLEEP0_CABTO_S 24 /* * Second enhanced sleep register */ -#define AR5K_SLEEP1 0x80d8 -#define AR5K_SLEEP1_NEXT_TIM 0x0007ffff +#define AR5K_SLEEP1 0x80d8 /* Register Address */ +#define AR5K_SLEEP1_NEXT_TIM 0x0007ffff /* Mask for next TIM (?) */ #define AR5K_SLEEP1_NEXT_TIM_S 0 -#define AR5K_SLEEP1_BEACON_TO 0xff000000 +#define AR5K_SLEEP1_BEACON_TO 0xff000000 /* Mask for Beacon Time Out */ #define AR5K_SLEEP1_BEACON_TO_S 24 /* * Third enhanced sleep register */ -#define AR5K_SLEEP2 0x80dc -#define AR5K_SLEEP2_TIM_PER 0x0000ffff +#define AR5K_SLEEP2 0x80dc /* Register Address */ +#define AR5K_SLEEP2_TIM_PER 0x0000ffff /* Mask for TIM period (?) */ #define AR5K_SLEEP2_TIM_PER_S 0 -#define AR5K_SLEEP2_DTIM_PER 0xffff0000 +#define AR5K_SLEEP2_DTIM_PER 0xffff0000 /* Mask for DTIM period (?) */ #define AR5K_SLEEP2_DTIM_PER_S 16 /* * BSSID mask registers */ -#define AR5K_BSS_IDM0 0x80e0 -#define AR5K_BSS_IDM1 0x80e4 +#define AR5K_BSS_IDM0 0x80e0 /* Upper bits */ +#define AR5K_BSS_IDM1 0x80e4 /* Lower bits */ /* * TX power control (TPC) register + * + * XXX: PCDAC steps (0.5dbm) or DBM ? + * + * XXX: Mask changes for newer chips to 7f + * like tx power table ? */ -#define AR5K_TXPC 0x80e8 -#define AR5K_TXPC_ACK_M 0x0000003f +#define AR5K_TXPC 0x80e8 /* Register Address */ +#define AR5K_TXPC_ACK_M 0x0000003f /* Mask for ACK tx power */ #define AR5K_TXPC_ACK_S 0 -#define AR5K_TXPC_CTS_M 0x00003f00 +#define AR5K_TXPC_CTS_M 0x00003f00 /* Mask for CTS tx power */ #define AR5K_TXPC_CTS_S 8 -#define AR5K_TXPC_CHIRP_M 0x003f0000 +#define AR5K_TXPC_CHIRP_M 0x003f0000 /* Mask for CHIRP tx power */ #define AR5K_TXPC_CHIRP_S 22 /* * Profile count registers */ -#define AR5K_PROFCNT_TX 0x80ec -#define AR5K_PROFCNT_RX 0x80f0 -#define AR5K_PROFCNT_RXCLR 0x80f4 -#define AR5K_PROFCNT_CYCLE 0x80f8 +#define AR5K_PROFCNT_TX 0x80ec /* Tx count */ +#define AR5K_PROFCNT_RX 0x80f0 /* Rx count */ +#define AR5K_PROFCNT_RXCLR 0x80f4 /* Clear Rx count */ +#define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle count (?) */ + +/* + * Quiet (period) control registers (?) + */ +#define AR5K_QUIET_CTL1 0x80fc /* Register Address */ +#define AR5K_QUIET_CTL1_NEXT_QT 0x0000ffff /* Mask for next quiet (period?) (?) */ +#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet (period?) */ +#define AR5K_QUIET_CTL2 0x8100 /* Register Address */ +#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period (?) */ +#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet duration (?) */ /* * TSF parameter register */ -#define AR5K_TSF_PARM 0x8104 -#define AR5K_TSF_PARM_INC_M 0x000000ff +#define AR5K_TSF_PARM 0x8104 /* Register Address */ +#define AR5K_TSF_PARM_INC_M 0x000000ff /* Mask for TSF increment */ #define AR5K_TSF_PARM_INC_S 0 +/* + * QoS register (?) + */ +#define AR5K_QOS 0x8108 /* Register Address */ +#define AR5K_QOS_NOACK_2BIT_VALUES 0x00000000 /* (field) */ +#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000020 /* (field) */ +#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000080 /* (field) */ + /* * PHY error filter register */ #define AR5K_PHY_ERR_FIL 0x810c -#define AR5K_PHY_ERR_FIL_RADAR 0x00000020 -#define AR5K_PHY_ERR_FIL_OFDM 0x00020000 -#define AR5K_PHY_ERR_FIL_CCK 0x02000000 +#define AR5K_PHY_ERR_FIL_RADAR 0x00000020 /* Radar signal */ +#define AR5K_PHY_ERR_FIL_OFDM 0x00020000 /* OFDM false detect (ANI) */ +#define AR5K_PHY_ERR_FIL_CCK 0x02000000 /* CCK false detect (ANI) */ + +/* + * XR latency register + */ +#define AR5K_XRLAT_TX 0x8110 /* - * Rate duration register + * ACK SIFS register + */ +#define AR5K_ACKSIFS 0x8114 /* Register Address */ +#define AR5K_ACKSIFS_INC 0x00000000 /* ACK SIFS Increment (field) */ + +/* + * MIC QoS control register (?) + */ +#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */ +#define AR5K_MIC_QOS_CTL_0 0x00000001 /* MIC QoS control 0 (?) */ +#define AR5K_MIC_QOS_CTL_1 0x00000004 /* MIC QoS control 1 (?) */ +#define AR5K_MIC_QOS_CTL_2 0x00000010 /* MIC QoS control 2 (?) */ +#define AR5K_MIC_QOS_CTL_3 0x00000040 /* MIC QoS control 3 (?) */ +#define AR5K_MIC_QOS_CTL_4 0x00000100 /* MIC QoS control 4 (?) */ +#define AR5K_MIC_QOS_CTL_5 0x00000400 /* MIC QoS control 5 (?) */ +#define AR5K_MIC_QOS_CTL_6 0x00001000 /* MIC QoS control 6 (?) */ +#define AR5K_MIC_QOS_CTL_7 0x00004000 /* MIC QoS control 7 (?) */ +#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */ + +/* + * MIC QoS select register (?) + */ +#define AR5K_MIC_QOS_SEL 0x811c +#define AR5K_MIC_QOS_SEL_0 0x00000001 +#define AR5K_MIC_QOS_SEL_1 0x00000010 +#define AR5K_MIC_QOS_SEL_2 0x00000100 +#define AR5K_MIC_QOS_SEL_3 0x00001000 +#define AR5K_MIC_QOS_SEL_4 0x00010000 +#define AR5K_MIC_QOS_SEL_5 0x00100000 +#define AR5K_MIC_QOS_SEL_6 0x01000000 +#define AR5K_MIC_QOS_SEL_7 0x10000000 + +/* + * Misc mode control register (?) + */ +#define AR5K_MISC_MODE 0x8120 /* Register Address */ +#define AR5K_MISC_MODE_FBSSID_MATCH 0x00000001 /* Force BSSID match */ +#define AR5K_MISC_MODE_ACKSIFS_MEM 0x00000002 /* ACK SIFS memory (?) */ +/* more bits */ + +/* + * OFDM Filter counter + */ +#define AR5K_OFDM_FIL_CNT 0x8124 + +/* + * CCK Filter counter + */ +#define AR5K_CCK_FIL_CNT 0x8128 + +/* + * PHY Error Counters (?) + */ +#define AR5K_PHYERR_CNT1 0x812c +#define AR5K_PHYERR_CNT1_MASK 0x8130 + +#define AR5K_PHYERR_CNT2 0x8134 +#define AR5K_PHYERR_CNT2_MASK 0x8138 + +/* + * TSF Threshold register (?) + */ +#define AR5K_TSF_THRES 0x813c + +/* + * Rate -> ACK SIFS mapping table (32 entries) + */ +#define AR5K_RATE_ACKSIFS_BASE 0x8680 /* Register Address */ +#define AR5K_RATE_ACKSIFS(_n) (AR5K_RATE_ACKSIFS_BSE + ((_n) << 2)) +#define AR5K_RATE_ACKSIFS_NORMAL 0x00000001 /* Normal SIFS (field) */ +#define AR5K_RATE_ACKSIFS_TURBO 0x00000400 /* Turbo SIFS (field) */ + +/* + * Rate -> duration mapping table (32 entries) */ #define AR5K_RATE_DUR_BASE 0x8700 #define AR5K_RATE_DUR(_n) (AR5K_RATE_DUR_BASE + ((_n) << 2)) +/* + * Rate -> db mapping table + * (8 entries, each one has 4 8bit fields) + */ +#define AR5K_RATE2DB_BASE 0x87c0 +#define AR5K_RATE2DB(_n) (AR5K_RATE2DB_BASE + ((_n) << 2)) + +/* + * db -> Rate mapping table + * (8 entries, each one has 4 8bit fields) + */ +#define AR5K_DB2RATE_BASE 0x87e0 +#define AR5K_DB2RATE(_n) (AR5K_DB2RATE_BASE + ((_n) << 2)) + /*===5212 end===*/ /* @@ -1613,12 +1832,34 @@ /*===PHY REGISTERS===*/ /* - * PHY register + * PHY registers start */ #define AR5K_PHY_BASE 0x9800 #define AR5K_PHY(_n) (AR5K_PHY_BASE + ((_n) << 2)) -#define AR5K_PHY_SHIFT_2GHZ 0x00004007 -#define AR5K_PHY_SHIFT_5GHZ 0x00000007 + +/* + * TST_2 (Misc config parameters) + */ +#define AR5K_PHY_TST2 0x9800 /* Register Address */ +#define AR5K_PHY_TST2_TRIG_SEL 0x00000001 /* Trigger select (?) (field ?) */ +#define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) (field ?) */ +#define AR5K_PHY_TST2_CBUS_MODE 0x00000100 /* Cardbus mode (?) */ +/* bit reserved */ +#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32Khz external) */ +#define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */ +#define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */ +#define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */ +#define AR5K_PHY_TST2_ALT_RFDATA 0x00004000 /* Alternate RFDATA (5-2GHz switch) */ +#define AR5K_PHY_TST2_MINI_OBS_EN 0x00008000 /* Enable mini OBS (?) */ +#define AR5K_PHY_TST2_RX2_IS_RX5_INV 0x00010000 /* 2GHz rx path is the 5GHz path inverted (?) */ +#define AR5K_PHY_TST2_SLOW_CLK160 0x00020000 /* Slow CLK160 (?) */ +#define AR5K_PHY_TST2_AGC_OBS_SEL_3 0x00040000 /* AGC OBS Select 3 (?) */ +#define AR5K_PHY_TST2_BBB_OBS_SEL 0x00080000 /* BB OBS Select (field ?) */ +#define AR5K_PHY_TST2_ADC_OBS_SEL 0x00800000 /* ADC OBS Select (field ?) */ +#define AR5K_PHY_TST2_RX_CLR_SEL 0x08000000 /* RX Clear Select (?) */ +#define AR5K_PHY_TST2_FORCE_AGC_CLR 0x10000000 /* Force AGC clear (?) */ +#define AR5K_PHY_SHIFT_2GHZ 0x00004007 /* Used to access 2GHz radios */ +#define AR5K_PHY_SHIFT_5GHZ 0x00000007 /* Used to access 5GHz radios (default) */ /* * PHY frame control register [5110] /turbo mode register [5111+] @@ -1630,18 +1871,21 @@ * a "turbo mode register" for 5110. We treat this one as * a frame control register for 5110 below. */ -#define AR5K_PHY_TURBO 0x9804 -#define AR5K_PHY_TURBO_MODE 0x00000001 -#define AR5K_PHY_TURBO_SHORT 0x00000002 +#define AR5K_PHY_TURBO 0x9804 /* Register Address */ +#define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */ +#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Short mode (20Mhz channels) (?) */ /* * PHY agility command register + * (aka TST_1) */ -#define AR5K_PHY_AGC 0x9808 -#define AR5K_PHY_AGC_DISABLE 0x08000000 +#define AR5K_PHY_AGC 0x9808 /* Register Address */ +#define AR5K_PHY_TST1 0x9808 +#define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/ +#define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */ /* - * PHY timing register [5112+] + * PHY timing register 3 [5112+] */ #define AR5K_PHY_TIMING_3 0x9814 #define AR5K_PHY_TIMING_3_DSC_MAN 0xfffe0000 @@ -1657,26 +1901,81 @@ /* * PHY activation register */ -#define AR5K_PHY_ACT 0x981c -#define AR5K_PHY_ACT_ENABLE 0x00000001 -#define AR5K_PHY_ACT_DISABLE 0x00000002 +#define AR5K_PHY_ACT 0x981c /* Register Address */ +#define AR5K_PHY_ACT_ENABLE 0x00000001 /* Activate PHY */ +#define AR5K_PHY_ACT_DISABLE 0x00000002 /* Deactivate PHY */ + +/* + * PHY RF control registers + * (i think these are delay times, + * these calibration values exist + * in EEPROM) + */ +#define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */ +#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* Mask for TX frame to TX d(esc?) start */ + +#define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */ +#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000000f /* Mask for TX end to XLNA on */ + +#define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */ +#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */ +#define AR5K_PHY_RF_CTL4_TXF2XPA_B_ON 0x00000100 /* TX frame to XPA B on (field) */ +#define AR5K_PHY_RF_CTL4_TXE2XPA_A_OFF 0x00010000 /* TX end to XPA A off (field) */ +#define AR5K_PHY_RF_CTL4_TXE2XPA_B_OFF 0x01000000 /* TX end to XPA B off (field) */ + +/* + * Pre-Amplifier control register + * (XPA -> external pre-amplifier) + */ +#define AR5K_PHY_PA_CTL 0x9838 /* Register Address */ +#define AR5K_PHY_PA_CTL_XPA_A_HI 0x00000001 /* XPA A high (?) */ +#define AR5K_PHY_PA_CTL_XPA_B_HI 0x00000002 /* XPA B high (?) */ +#define AR5K_PHY_PA_CTL_XPA_A_EN 0x00000004 /* Enable XPA A */ +#define AR5K_PHY_PA_CTL_XPA_B_EN 0x00000008 /* Enable XPA B */ + +/* + * PHY settling register + */ +#define AR5K_PHY_SETTLING 0x9844 /* Register Address */ +#define AR5K_PHY_SETTLING_AGC 0x0000007f /* Mask for AGC settling time */ +#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Mask for Switch settlig time */ + +/* + * PHY Gain registers + */ +#define AR5K_PHY_GAIN 0x9848 /* Register Address */ +#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* Mask for TX-RX Attenuation */ + +#define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */ +#define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */ + +/* + * Desired size register + * (for more infos read ANI patent) + */ +#define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */ +#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* Mask for ADC desired size */ +#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* Mask for PGA desired size */ +#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Mask for Total desired size (?) */ /* * PHY signal register + * (for more infos read ANI patent) */ -#define AR5K_PHY_SIG 0x9858 -#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 +#define AR5K_PHY_SIG 0x9858 /* Register Address */ +#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* Mask for FIRSTEP */ #define AR5K_PHY_SIG_FIRSTEP_S 12 -#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 +#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* Mask for FIPWR */ #define AR5K_PHY_SIG_FIRPWR_S 18 /* * PHY coarse agility control register + * (for more infos read ANI patent) */ -#define AR5K_PHY_AGCCOARSE 0x985c -#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 +#define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */ +#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* Mask for AGC Coarse low */ #define AR5K_PHY_AGCCOARSE_LO_S 7 -#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 +#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* Mask for AGC Coarse high */ #define AR5K_PHY_AGCCOARSE_HI_S 15 /* @@ -1689,12 +1988,13 @@ /* * PHY noise floor status register */ -#define AR5K_PHY_NF 0x9864 -#define AR5K_PHY_NF_M 0x000001ff -#define AR5K_PHY_NF_ACTIVE 0x00000100 +#define AR5K_PHY_NF 0x9864 /* Register address */ +#define AR5K_PHY_NF_M 0x000001ff /* Noise floor mask */ +#define AR5K_PHY_NF_ACTIVE 0x00000100 /* Noise floor calibration still active */ #define AR5K_PHY_NF_RVAL(_n) (((_n) >> 19) & AR5K_PHY_NF_M) #define AR5K_PHY_NF_AVAL(_n) (-((_n) ^ AR5K_PHY_NF_M) + 1) #define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9)) +#define AR5K_PHY_NF_THRESH62 0x00001000 /* Thresh62 -check ANI patent- (field) */ /* * PHY ADC saturation register [5110] @@ -1705,6 +2005,30 @@ #define AR5K_PHY_ADCSAT_THR 0x000007e0 #define AR5K_PHY_ADCSAT_THR_S 5 +/* + * PHY Weak ofdm signal detection threshold registers (ANI) [5212+] + */ + +/* High thresholds */ +#define AR5K_PHY_WEAK_OFDM_HIGH_THR 0x9868 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT 0x0000001f +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT_S 0 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1 0x00fe0000 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1_S 17 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2 0x7f000000 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S 24 + +/* Low thresholds */ +#define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c +#define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN 0x00000001 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT 0x00003f00 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S 8 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1 0x001fc000 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1_S 14 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2 0x0fe00000 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_S 21 + + /* * PHY sleep registers [5112+] */ @@ -1730,6 +2054,8 @@ AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212) #define AR5K_PHY_PLL_RF5111 0x00000000 #define AR5K_PHY_PLL_RF5112 0x00000040 +#define AR5K_PHY_PLL_HALF_RATE 0x00000100 +#define AR5K_PHY_PLL_QUARTER_RATE 0x00000200 /* * RF Buffer register @@ -1791,24 +2117,75 @@ #define AR5K_PHY_RFSTG 0x98d4 #define AR5K_PHY_RFSTG_DISABLE 0x00000021 +/* + * PHY Antenna control register + */ +#define AR5K_PHY_ANT_CTL 0x9910 /* Register Address */ +#define AR5K_PHY_ANT_CTL_TXRX_EN 0x00000001 /* Enable TX/RX (?) */ +#define AR5K_PHY_ANT_CTL_SECTORED_ANT 0x00000004 /* Sectored Antenna */ +#define AR5K_PHY_ANT_CTL_HITUNE5 0x00000008 /* Hitune5 (?) */ +#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE 0x00000010 /* Switch table idle (?) */ + /* * PHY receiver delay register [5111+] */ -#define AR5K_PHY_RX_DELAY 0x9914 -#define AR5K_PHY_RX_DELAY_M 0x00003fff +#define AR5K_PHY_RX_DELAY 0x9914 /* Register Address */ +#define AR5K_PHY_RX_DELAY_M 0x00003fff /* Mask for RX activate to receive delay (/100ns) */ + +/* + * PHY max rx length register (?) [5111] + */ +#define AR5K_PHY_MAX_RX_LEN 0x991c /* - * PHY timing I(nphase) Q(adrature) control register [5111+] + * PHY timing register 4 + * I(nphase)/Q(adrature) calibration register [5111+] */ -#define AR5K_PHY_IQ 0x9920 /* Register address */ +#define AR5K_PHY_IQ 0x9920 /* Register Address */ #define AR5K_PHY_IQ_CORR_Q_Q_COFF 0x0000001f /* Mask for q correction info */ #define AR5K_PHY_IQ_CORR_Q_I_COFF 0x000007e0 /* Mask for i correction info */ #define AR5K_PHY_IQ_CORR_Q_I_COFF_S 5 #define AR5K_PHY_IQ_CORR_ENABLE 0x00000800 /* Enable i/q correction */ -#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX 0x0000f000 +#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX 0x0000f000 /* Mask for max number of samples in log scale */ #define AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S 12 #define AR5K_PHY_IQ_RUN 0x00010000 /* Run i/q calibration */ +#define AR5K_PHY_IQ_USE_PT_DF 0x00020000 /* Use pilot track df (?) */ +#define AR5K_PHY_IQ_EARLY_TRIG_THR 0x00200000 /* Early trigger threshold (?) (field) */ +#define AR5K_PHY_IQ_PILOT_MASK_EN 0x10000000 /* Enable pilot mask (?) */ +#define AR5K_PHY_IQ_CHAN_MASK_EN 0x20000000 /* Enable channel mask (?) */ +#define AR5K_PHY_IQ_SPUR_FILT_EN 0x40000000 /* Enable spur filter */ +#define AR5K_PHY_IQ_SPUR_RSSI_EN 0x80000000 /* Enable spur rssi */ +/* + * PHY timing register 5 + * OFDM Self-correlator Cyclic RSSI threshold params + * (Check out bb_cycpwr_thr1 on ANI patent) + */ +#define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */ +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */ +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */ +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */ +#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */ +#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */ +#define AR5K_PHY_OFDM_SELFCORR_LSCTHR_HIRSSI 0x00800000 /* Long sc threshold hi rssi (?) */ + +/* + * PHY-only warm reset register + */ +#define AR5K_PHY_WARM_RESET 0x9928 + +/* + * PHY-only control register + */ +#define AR5K_PHY_CTL 0x992c /* Register Address */ +#define AR5K_PHY_CTL_RX_DRAIN_RATE 0x00000001 /* RX drain rate (?) */ +#define AR5K_PHY_CTL_LATE_TX_SIG_SYM 0x00000002 /* Late tx signal symbol (?) */ +#define AR5K_PHY_CTL_GEN_SCRAMBLER 0x00000004 /* Generate scrambler */ +#define AR5K_PHY_CTL_TX_ANT_SEL 0x00000008 /* TX antenna select */ +#define AR5K_PHY_CTL_TX_ANT_STATIC 0x00000010 /* Static TX antenna */ +#define AR5K_PHY_CTL_RX_ANT_SEL 0x00000020 /* RX antenna select */ +#define AR5K_PHY_CTL_RX_ANT_STATIC 0x00000040 /* Static RX antenna */ +#define AR5K_PHY_CTL_LOW_FREQ_SLE_EN 0x00000080 /* Enable low freq sleep */ /* * PHY PAPD probe register [5111+ (?)] @@ -1816,9 +2193,13 @@ * Because it's always 0 in 5211 initialization code */ #define AR5K_PHY_PAPD_PROBE 0x9930 +#define AR5K_PHY_PAPD_PROBE_SH_HI_PAR 0x00000001 +#define AR5K_PHY_PAPD_PROBE_PCDAC_BIAS 0x00000002 +#define AR5K_PHY_PAPD_PROBE_COMP_GAIN 0x00000040 #define AR5K_PHY_PAPD_PROBE_TXPOWER 0x00007e00 #define AR5K_PHY_PAPD_PROBE_TXPOWER_S 9 #define AR5K_PHY_PAPD_PROBE_TX_NEXT 0x00008000 +#define AR5K_PHY_PAPD_PROBE_PREDIST_EN 0x00010000 #define AR5K_PHY_PAPD_PROBE_TYPE 0x01800000 /* [5112+] */ #define AR5K_PHY_PAPD_PROBE_TYPE_S 23 #define AR5K_PHY_PAPD_PROBE_TYPE_OFDM 0 @@ -1848,15 +2229,16 @@ #define AR5K_PHY_FRAME_CTL (ah->ah_version == AR5K_AR5210 ? \ AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211) /*---[5111+]---*/ -#define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 +#define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */ #define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3 +#define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */ /*---[5110/5111]---*/ -#define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 -#define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 -#define AR5K_PHY_FRAME_CTL_ILLRATE_ERR 0x04000000 /* illegal rate */ -#define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* illegal length */ +#define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */ +#define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */ +#define AR5K_PHY_FRAME_CTL_ILLRATE_ERR 0x04000000 /* Illegal rate */ +#define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* Illegal length */ #define AR5K_PHY_FRAME_CTL_SERVICE_ERR 0x20000000 -#define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* tx underrun */ +#define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* TX underrun */ #define AR5K_PHY_FRAME_CTL_INI AR5K_PHY_FRAME_CTL_SERVICE_ERR | \ AR5K_PHY_FRAME_CTL_TXURN_ERR | \ AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \ @@ -1914,6 +2296,11 @@ after DFS is enabled */ #define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960 #define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964 +/* + * PHY Noise floor threshold + */ +#define AR5K_PHY_NFTHRES 0x9968 + /* * PHY clock sleep registers [5112+] */ @@ -1922,56 +2309,116 @@ after DFS is enabled */ #define AR5K_PHY_SDELAY 0x99f4 #define AR5K_PHY_SDELAY_32MHZ 0x000000ff #define AR5K_PHY_SPENDING 0x99f8 +#define AR5K_PHY_SPENDING_14 0x00000014 +#define AR5K_PHY_SPENDING_18 0x00000018 #define AR5K_PHY_SPENDING_RF5111 0x00000018 -#define AR5K_PHY_SPENDING_RF5112 0x00000014 /* <- i 've only seen this on 2425 dumps ! */ -#define AR5K_PHY_SPENDING_RF5112A 0x0000000e /* but since i only have 5112A-based chips */ -#define AR5K_PHY_SPENDING_RF5424 0x00000012 /* to test it might be also for old 5112. */ +#define AR5K_PHY_SPENDING_RF5112 0x00000014 +/* #define AR5K_PHY_SPENDING_RF5112A 0x0000000e */ +/* #define AR5K_PHY_SPENDING_RF5424 0x00000012 */ +#define AR5K_PHY_SPENDING_RF5413 0x00000014 +#define AR5K_PHY_SPENDING_RF2413 0x00000014 +#define AR5K_PHY_SPENDING_RF2425 0x00000018 /* * Misc PHY/radio registers [5110 - 5111] */ -#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ +#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ #define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2)) -#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */ +#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */ #define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2)) /* * PHY timing IQ calibration result register [5111+] */ -#define AR5K_PHY_IQRES_CAL_PWR_I 0x9c10 /* I (Inphase) power value */ -#define AR5K_PHY_IQRES_CAL_PWR_Q 0x9c14 /* Q (Quadrature) power value */ +#define AR5K_PHY_IQRES_CAL_PWR_I 0x9c10 /* I (Inphase) power value */ +#define AR5K_PHY_IQRES_CAL_PWR_Q 0x9c14 /* Q (Quadrature) power value */ #define AR5K_PHY_IQRES_CAL_CORR 0x9c18 /* I/Q Correlation */ /* * PHY current RSSI register [5111+] */ -#define AR5K_PHY_CURRENT_RSSI 0x9c1c +#define AR5K_PHY_CURRENT_RSSI 0x9c1c + +/* + * PHY RF Bus grant register (?) + */ +#define AR5K_PHY_RFBUS_GRANT 0x9c20 + +/* + * PHY ADC test register + */ +#define AR5K_PHY_ADC_TEST 0x9c24 +#define AR5K_PHY_ADC_TEST_I 0x00000001 +#define AR5K_PHY_ADC_TEST_Q 0x00000200 + +/* + * PHY DAC test register + */ +#define AR5K_PHY_DAC_TEST 0x9c28 +#define AR5K_PHY_DAC_TEST_I 0x00000001 +#define AR5K_PHY_DAC_TEST_Q 0x00000200 + +/* + * PHY PTAT register (?) + */ +#define AR5K_PHY_PTAT 0x9c2c + +/* + * PHY Illegal TX rate register [5112+] + */ +#define AR5K_PHY_BAD_TX_RATE 0x9c30 + +/* + * PHY SPUR Power register [5112+] + */ +#define AR5K_PHY_SPUR_PWR 0x9c34 /* Register Address */ +#define AR5K_PHY_SPUR_PWR_I 0x00000001 /* SPUR Power estimate for I (field) */ +#define AR5K_PHY_SPUR_PWR_Q 0x00000100 /* SPUR Power estimate for Q (field) */ +#define AR5K_PHY_SPUR_PWR_FILT 0x00010000 /* Power with SPUR removed (field) */ + +/* + * PHY Channel status register [5112+] (?) + */ +#define AR5K_PHY_CHAN_STATUS 0x9c38 +#define AR5K_PHY_CHAN_STATUS_BT_ACT 0x00000001 +#define AR5K_PHY_CHAN_STATUS_RX_CLR_RAW 0x00000002 +#define AR5K_PHY_CHAN_STATUS_RX_CLR_MAC 0x00000004 +#define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008 + +/* + * PHY PAPD I (power?) table (?) + * (92! entries) + */ +#define AR5K_PHY_PAPD_I_BASE 0xa000 +#define AR5K_PHY_PAPD_I(_n) (AR5K_PHY_PAPD_I_BASE + ((_n) << 2)) /* * PHY PCDAC TX power table */ #define AR5K_PHY_PCDAC_TXPOWER_BASE_5211 0xa180 -#define AR5K_PHY_PCDAC_TXPOWER_BASE_5413 0xa280 -#define AR5K_PHY_PCDAC_TXPOWER_BASE (ah->ah_radio >= AR5K_RF5413 ? \ - AR5K_PHY_PCDAC_TXPOWER_BASE_5413 :\ +#define AR5K_PHY_PCDAC_TXPOWER_BASE_2413 0xa280 +#define AR5K_PHY_PCDAC_TXPOWER_BASE (ah->ah_radio >= AR5K_RF2413 ? \ + AR5K_PHY_PCDAC_TXPOWER_BASE_2413 :\ AR5K_PHY_PCDAC_TXPOWER_BASE_5211) #define AR5K_PHY_PCDAC_TXPOWER(_n) (AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2)) /* * PHY mode register [5111+] */ -#define AR5K_PHY_MODE 0x0a200 /* Register address */ -#define AR5K_PHY_MODE_MOD 0x00000001 /* PHY Modulation mask*/ +#define AR5K_PHY_MODE 0x0a200 /* Register Address */ +#define AR5K_PHY_MODE_MOD 0x00000001 /* PHY Modulation bit */ #define AR5K_PHY_MODE_MOD_OFDM 0 #define AR5K_PHY_MODE_MOD_CCK 1 -#define AR5K_PHY_MODE_FREQ 0x00000002 /* Freq mode mask */ +#define AR5K_PHY_MODE_FREQ 0x00000002 /* Freq mode bit */ #define AR5K_PHY_MODE_FREQ_5GHZ 0 #define AR5K_PHY_MODE_FREQ_2GHZ 2 -#define AR5K_PHY_MODE_MOD_DYN 0x00000004 /* Dynamic OFDM/CCK mode mask [5112+] */ +#define AR5K_PHY_MODE_MOD_DYN 0x00000004 /* Enable Dynamic OFDM/CCK mode [5112+] */ #define AR5K_PHY_MODE_RAD 0x00000008 /* [5212+] */ #define AR5K_PHY_MODE_RAD_RF5111 0 #define AR5K_PHY_MODE_RAD_RF5112 8 -#define AR5K_PHY_MODE_XR 0x00000010 /* [5112+] */ +#define AR5K_PHY_MODE_XR 0x00000010 /* Enable XR mode [5112+] */ +#define AR5K_PHY_MODE_HALF_RATE 0x00000020 /* Enable Half rate (test) */ +#define AR5K_PHY_MODE_QUARTER_RATE 0x00000040 /* Enable Quarter rat (test) */ /* * PHY CCK transmit control register [5111+ (?)] @@ -1979,6 +2426,15 @@ after DFS is enabled */ #define AR5K_PHY_CCKTXCTL 0xa204 #define AR5K_PHY_CCKTXCTL_WORLD 0x00000000 #define AR5K_PHY_CCKTXCTL_JAPAN 0x00000010 +#define AR5K_PHY_CCKTXCTL_SCRAMBLER_DIS 0x00000001 +#define AR5K_PHY_CCKTXCTK_DAC_SCALE 0x00000004 + +/* + * PHY CCK Cross-correlator Barker RSSI threshold register [5212+] + */ +#define AR5K_PHY_CCK_CROSSCORR 0xa208 +#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000000f +#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0 /* * PHY 2GHz gain register [5111+] -- cgit v1.2.3 From ba37746e547e14703a5ac86560c6e056620bc4cf Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:32:32 +0300 Subject: ath5k: Restore saved initval after POST * Restore saved initial value after POST Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/hw.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index 42ef41ed5d18..b3b9baa551bc 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -139,6 +139,8 @@ static int ath5k_hw_post(struct ath5k_hw *ah) for (c = 0; c < 2; c++) { cur_reg = regs[c]; + + /* Save previous value */ init_val = ath5k_hw_reg_read(ah, cur_reg); for (i = 0; i < 256; i++) { @@ -170,6 +172,10 @@ static int ath5k_hw_post(struct ath5k_hw *ah) var_pattern = 0x003b080f; ath5k_hw_reg_write(ah, var_pattern, cur_reg); } + + /* Restore previous value */ + ath5k_hw_reg_write(ah, init_val, cur_reg); + } return 0; -- cgit v1.2.3 From e5a4ad0dda8f79a984ba6391af65274b482b6703 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:34:39 +0300 Subject: ath5k: Misc hw_attach fixes * Correctly attach RF2425 * Update SREV values for Radio chips * Update hw_attach to use new SPENDING values * Write a bit after POST for some chips Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/ath5k.h | 8 +++-- drivers/net/wireless/ath5k/hw.c | 62 +++++++++++++------------------------- 2 files changed, 26 insertions(+), 44 deletions(-) diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h index ba35c30d203c..9102eea3c8bf 100644 --- a/drivers/net/wireless/ath5k/ath5k.h +++ b/drivers/net/wireless/ath5k/ath5k.h @@ -186,11 +186,13 @@ struct ath5k_srev_name { #define AR5K_SREV_RAD_2111 0x20 #define AR5K_SREV_RAD_5112 0x30 #define AR5K_SREV_RAD_5112A 0x35 +#define AR5K_SREV_RAD_5112B 0x36 #define AR5K_SREV_RAD_2112 0x40 #define AR5K_SREV_RAD_2112A 0x45 -#define AR5K_SREV_RAD_SC0 0x56 /* Found on 2413/2414 */ -#define AR5K_SREV_RAD_SC1 0x63 /* Found on 5413/5414 */ -#define AR5K_SREV_RAD_SC2 0xa2 /* Found on 2424-5/5424 */ +#define AR5K_SREV_RAD_2112B 0x46 +#define AR5K_SREV_RAD_SC0 0x50 /* Found on 2413/2414 */ +#define AR5K_SREV_RAD_SC1 0x60 /* Found on 5413/5414 */ +#define AR5K_SREV_RAD_SC2 0xa0 /* Found on 2424-5/5424 */ #define AR5K_SREV_RAD_5133 0xc0 /* MIMO found on 5418 */ /* IEEE defs */ diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index b3b9baa551bc..8cd8659e9128 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -293,67 +293,42 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) /* Identify the radio chip*/ if (ah->ah_version == AR5K_AR5210) { ah->ah_radio = AR5K_RF5110; + /* + * Register returns 0x0/0x04 for radio revision + * so ath5k_hw_radio_revision doesn't parse the value + * correctly. For now we are based on mac's srev to + * identify RF2425 radio. + */ + } else if (srev == AR5K_SREV_VER_AR2425) { + ah->ah_radio = AR5K_RF2425; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425; } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) { ah->ah_radio = AR5K_RF5111; ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111; } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) { - ah->ah_radio = AR5K_RF5112; - - if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112A) { - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112; - } else { - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A; - } - + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112; } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) { ah->ah_radio = AR5K_RF2413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) { ah->ah_radio = AR5K_RF5413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5133) { - /* AR5424 */ if (srev >= AR5K_SREV_VER_AR5424) { ah->ah_radio = AR5K_RF5413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5424; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; /* AR2424 */ } else { ah->ah_radio = AR5K_RF2413; /* For testing */ - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; } - - /* - * Register returns 0x4 for radio revision - * so ath5k_hw_radio_revision doesn't parse the value - * correctly. For now we are based on mac's srev to - * identify RF2425 radio. - */ - } else if (srev == AR5K_SREV_VER_AR2425) { - ah->ah_radio = AR5K_RF2425; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112; } - ah->ah_phy = AR5K_PHY(0); /* - * Identify AR5212-based PCI-E cards - * And write some initial settings. - * - * (doing a "strings" on ndis driver - * -ar5211.sys- reveals the following - * pci-e related functions: - * - * pcieClockReq - * pcieRxErrNotify - * pcieL1SKPEnable - * pcieAspm - * pcieDisableAspmOnRfWake - * pciePowerSaveEnable - * - * I guess these point to ClockReq but - * i'm not sure.) + * Write PCI-E power save settings */ if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) { ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080); @@ -375,10 +350,15 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) if (ret) goto err_free; + /* Write AR5K_PCICFG_UNK on 2112B and later chips */ + if (ah->ah_radio_5ghz_revision > AR5K_SREV_RAD_2112B || + srev > AR5K_SREV_VER_AR2413) { + ath5k_hw_reg_write(ah, AR5K_PCICFG_UNK, AR5K_PCICFG); + } + /* * Get card capabilities, values, ... */ - ret = ath5k_eeprom_init(ah); if (ret) { ATH5K_ERR(sc, "unable to init EEPROM\n"); -- cgit v1.2.3 From 2203d6be7ed17af81a1dc35a0af9806086743b02 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:36:52 +0300 Subject: ath5k: Misc hw_reset updates * Update hw_reset to calculate some of the values we were using as static * Increase activation to rx delay Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/hw.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index 8cd8659e9128..dc51b844c62d 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -847,7 +847,22 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, else ath5k_hw_reg_write(ah, 0x00000000, 0x994c); - ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); + /* Some bits are disabled here, we know nothing about + * register 0xa228 yet, most of the times this ends up + * with a value 0x9b5 -haven't seen any dump with + * a different value- */ + /* Got this from decompiling binary HAL */ + data = ath5k_hw_reg_read(ah, 0xa228); + data &= 0xfffffdff; + ath5k_hw_reg_write(ah, data, 0xa228); + + data = ath5k_hw_reg_read(ah, 0xa228); + data &= 0xfffe03ff; + ath5k_hw_reg_write(ah, data, 0xa228); + data = 0; + + /* Just write 0x9b5 ? */ + /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */ ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK); ath5k_hw_reg_write(ah, 0x00000000, 0xa254); ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL); @@ -864,6 +879,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, else data = 0xffb80d20; ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); + data = 0; } /* @@ -883,7 +899,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, /* * Write RF registers - * TODO:Does this work on 5211 (5111) ? */ ret = ath5k_hw_rfregs(ah, channel, mode); if (ret) @@ -1048,7 +1063,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); /* - * 5111/5112 Specific + * On 5211+ read activation -> rx delay + * and use it. */ if (ah->ah_version != AR5K_AR5210) { data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & @@ -1056,7 +1072,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, data = (channel->hw_value & CHANNEL_CCK) ? ((data << 2) / 22) : (data / 10); - udelay(100 + data); + udelay(100 + (2 * data)); + data = 0; } else { mdelay(1); } @@ -1139,6 +1156,12 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING); + + data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ; + data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ? + 0x00000f80 : 0x00001380 ; + ath5k_hw_reg_write(ah, data, AR5K_USEC_5211); + data = 0; } if (ah->ah_version == AR5K_AR5212) { -- cgit v1.2.3 From e2a0ccebc4ffabc1c7234cfd324299b5a936e0f2 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:38:16 +0300 Subject: ath5k: Do ADC test during reset * Do an ADC test during reset to match recent regdumps Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/hw.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index dc51b844c62d..3937e46e4735 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -1078,6 +1078,19 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, mdelay(1); } + /* + * Perform ADC test (?) + */ + data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); + ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); + for (i = 0; i <= 20; i++) { + if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) + break; + udelay(200); + } + ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1); + data = 0; + /* * Enable calibration and wait until completion */ -- cgit v1.2.3 From df75dcddf99647d68f3b6b874effe5365c5024d9 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:41:26 +0300 Subject: ath5k: Reorder calibration calls during reset and update hw_set_power * Update ath5k_hw_reset and add some more documentation about PHY calibration * Fix ath5k_hw_set_power to use AR5K_SLEEP_CTL_SLE_ALLOW for Network sleep * Preserve sleep duration field while setting AR5K_SLEEP_CTL and reduce delays & checks for register's status (got this from decompiling & dumps, it works for me but it needs testing) Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/hw.c | 82 +++++++++++++++++++++++++++++------------ 1 file changed, 59 insertions(+), 23 deletions(-) diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index 3937e46e4735..ad1a5b422c8c 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -1092,34 +1092,57 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, data = 0; /* - * Enable calibration and wait until completion + * Start automatic gain calibration + * + * During AGC calibration RX path is re-routed to + * a signal detector so we don't receive anything. + * + * This method is used to calibrate some static offsets + * used together with on-the fly I/Q calibration (the + * one performed via ath5k_hw_phy_calibrate), that doesn't + * interrupt rx path. + * + * If we are in a noisy environment AGC calibration may time + * out. */ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_CAL); + /* At the same time start I/Q calibration for QAM constellation + * -no need for CCK- */ + ah->ah_calibration = false; + if (!(mode == AR5K_MODE_11B)) { + ah->ah_calibration = true; + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_RUN); + } + + /* Wait for gain calibration to finish (we check for I/Q calibration + * during ath5k_phy_calibrate) */ if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_CAL, 0, false)) { - ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n", + ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n", channel->center_freq); return -EAGAIN; } + /* + * Start noise floor calibration + * + * If we run NF calibration before AGC, it always times out. + * Binary HAL starts NF and AGC calibration at the same time + * and only waits for AGC to finish. I believe that's wrong because + * during NF calibration, rx path is also routed to a detector, so if + * it doesn't finish we won't have RX. + * + * XXX: Find an interval that's OK for all cards... + */ ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq); if (ret) return ret; - ah->ah_calibration = false; - - /* A and G modes can use QAM modulation which requires enabling - * I and Q calibration. Don't bother in B mode. */ - if (!(mode == AR5K_MODE_11B)) { - ah->ah_calibration = true; - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_RUN); - } - /* * Reset queues and start beacon timers at the end of the reset routine */ @@ -1247,7 +1270,7 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration) { unsigned int i; - u32 staid; + u32 staid, data; ATH5K_TRACE(ah->ah_sc); staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); @@ -1259,7 +1282,8 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, case AR5K_PM_NETWORK_SLEEP: if (set_chip) ath5k_hw_reg_write(ah, - AR5K_SLEEP_CTL_SLE | sleep_duration, + AR5K_SLEEP_CTL_SLE_ALLOW | + sleep_duration, AR5K_SLEEP_CTL); staid |= AR5K_STA_ID1_PWR_SV; @@ -1274,13 +1298,24 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, break; case AR5K_PM_AWAKE: + + staid &= ~AR5K_STA_ID1_PWR_SV; + if (!set_chip) goto commit; - ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE, - AR5K_SLEEP_CTL); + /* Preserve sleep duration */ + data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL); + if( data & 0xffc00000 ){ + data = 0; + } else { + data = data & 0xfffcffff; + } + + ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); + udelay(15); - for (i = 5000; i > 0; i--) { + for (i = 50; i > 0; i--) { /* Check if the chip did wake up */ if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_SPWR_DN) == 0) @@ -1288,15 +1323,13 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, /* Wait a bit and retry */ udelay(200); - ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE, - AR5K_SLEEP_CTL); + ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); } /* Fail if the chip didn't wake up */ if (i <= 0) return -EIO; - staid &= ~AR5K_STA_ID1_PWR_SV; break; default: @@ -1325,6 +1358,7 @@ void ath5k_hw_start_rx(struct ath5k_hw *ah) { ATH5K_TRACE(ah->ah_sc); ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); } /* @@ -1411,6 +1445,7 @@ int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue) } /* Start queue */ ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); } else { /* Return if queue is disabled */ if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue)) @@ -1708,6 +1743,7 @@ enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask) * (they will be re-enabled afterwards). */ ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); old_mask = ah->ah_imr; @@ -3511,7 +3547,7 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_TXE); + AR5K_QCU_MISC_RDY_VEOL_POLICY); } if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE) -- cgit v1.2.3 From 27bcdeed320c8c7dc0f502df43f6465f0d9840f1 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:42:47 +0300 Subject: ath5k: Add RF2425 initial rfgain values * Add initial RF gain settings for RF2425 Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/phy.c | 72 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 70 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index afd8689e5c03..66af70bd14e7 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -1020,6 +1020,74 @@ static const struct ath5k_ini_rfgain rfgain_2413[] = { { AR5K_RF_GAIN(63), { 0x000000f9 } }, }; +/* Initial RF Gain settings for RF2425 */ +static const struct ath5k_ini_rfgain rfgain_2425[] = { + { AR5K_RF_GAIN(0), { 0x00000000 } }, + { AR5K_RF_GAIN(1), { 0x00000040 } }, + { AR5K_RF_GAIN(2), { 0x00000080 } }, + { AR5K_RF_GAIN(3), { 0x00000181 } }, + { AR5K_RF_GAIN(4), { 0x000001c1 } }, + { AR5K_RF_GAIN(5), { 0x00000001 } }, + { AR5K_RF_GAIN(6), { 0x00000041 } }, + { AR5K_RF_GAIN(7), { 0x00000081 } }, + { AR5K_RF_GAIN(8), { 0x00000188 } }, + { AR5K_RF_GAIN(9), { 0x000001c8 } }, + { AR5K_RF_GAIN(10), { 0x00000008 } }, + { AR5K_RF_GAIN(11), { 0x00000048 } }, + { AR5K_RF_GAIN(12), { 0x00000088 } }, + { AR5K_RF_GAIN(13), { 0x00000189 } }, + { AR5K_RF_GAIN(14), { 0x000001c9 } }, + { AR5K_RF_GAIN(15), { 0x00000009 } }, + { AR5K_RF_GAIN(16), { 0x00000049 } }, + { AR5K_RF_GAIN(17), { 0x00000089 } }, + { AR5K_RF_GAIN(18), { 0x000001b0 } }, + { AR5K_RF_GAIN(19), { 0x000001f0 } }, + { AR5K_RF_GAIN(20), { 0x00000030 } }, + { AR5K_RF_GAIN(21), { 0x00000070 } }, + { AR5K_RF_GAIN(22), { 0x00000171 } }, + { AR5K_RF_GAIN(23), { 0x000001b1 } }, + { AR5K_RF_GAIN(24), { 0x000001f1 } }, + { AR5K_RF_GAIN(25), { 0x00000031 } }, + { AR5K_RF_GAIN(26), { 0x00000071 } }, + { AR5K_RF_GAIN(27), { 0x000001b8 } }, + { AR5K_RF_GAIN(28), { 0x000001f8 } }, + { AR5K_RF_GAIN(29), { 0x00000038 } }, + { AR5K_RF_GAIN(30), { 0x00000078 } }, + { AR5K_RF_GAIN(31), { 0x000000b8 } }, + { AR5K_RF_GAIN(32), { 0x000001b9 } }, + { AR5K_RF_GAIN(33), { 0x000001f9 } }, + { AR5K_RF_GAIN(34), { 0x00000039 } }, + { AR5K_RF_GAIN(35), { 0x00000079 } }, + { AR5K_RF_GAIN(36), { 0x000000b9 } }, + { AR5K_RF_GAIN(37), { 0x000000f9 } }, + { AR5K_RF_GAIN(38), { 0x000000f9 } }, + { AR5K_RF_GAIN(39), { 0x000000f9 } }, + { AR5K_RF_GAIN(40), { 0x000000f9 } }, + { AR5K_RF_GAIN(41), { 0x000000f9 } }, + { AR5K_RF_GAIN(42), { 0x000000f9 } }, + { AR5K_RF_GAIN(43), { 0x000000f9 } }, + { AR5K_RF_GAIN(44), { 0x000000f9 } }, + { AR5K_RF_GAIN(45), { 0x000000f9 } }, + { AR5K_RF_GAIN(46), { 0x000000f9 } }, + { AR5K_RF_GAIN(47), { 0x000000f9 } }, + { AR5K_RF_GAIN(48), { 0x000000f9 } }, + { AR5K_RF_GAIN(49), { 0x000000f9 } }, + { AR5K_RF_GAIN(50), { 0x000000f9 } }, + { AR5K_RF_GAIN(51), { 0x000000f9 } }, + { AR5K_RF_GAIN(52), { 0x000000f9 } }, + { AR5K_RF_GAIN(53), { 0x000000f9 } }, + { AR5K_RF_GAIN(54), { 0x000000f9 } }, + { AR5K_RF_GAIN(55), { 0x000000f9 } }, + { AR5K_RF_GAIN(56), { 0x000000f9 } }, + { AR5K_RF_GAIN(57), { 0x000000f9 } }, + { AR5K_RF_GAIN(58), { 0x000000f9 } }, + { AR5K_RF_GAIN(59), { 0x000000f9 } }, + { AR5K_RF_GAIN(60), { 0x000000f9 } }, + { AR5K_RF_GAIN(61), { 0x000000f9 } }, + { AR5K_RF_GAIN(62), { 0x000000f9 } }, + { AR5K_RF_GAIN(63), { 0x000000f9 } }, +}; + static const struct ath5k_gain_opt rfgain_opt_5112 = { 1, 8, @@ -1588,8 +1656,8 @@ int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq) freq = 0; /* only 2Ghz */ break; case AR5K_RF2425: - ath5k_rfg = rfgain_2413; - size = ARRAY_SIZE(rfgain_2413); + ath5k_rfg = rfgain_2425; + size = ARRAY_SIZE(rfgain_2425); freq = 0; /* only 2Ghz */ break; default: -- cgit v1.2.3 From cc6323c7d8c231d83e592ff9f7acf2cac5e016f7 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:44:43 +0300 Subject: ath5k: Update channel functions * Add channel function for RF2425 (got this from decompiling binary HAL, i have no idea why there is a 5GHz section but i'm looking into it) * Update RF5112 channel function (also got this from decompiling binary HAL) * Set JAPAN setting for channel 14 on all PHY chips Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/phy.c | 59 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 55 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index 66af70bd14e7..cbc362d20719 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -1898,9 +1898,6 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, data = data0 = data1 = data2 = 0; c = channel->center_freq; - /* - * Set the channel on the RF5112 or newer - */ if (c < 4800) { if (!((c - 2224) % 5)) { data0 = ((2 * (c - 704)) - 3040) / 10; @@ -1912,7 +1909,7 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, return -EINVAL; data0 = ath5k_hw_bitswap((data0 << 2) & 0xff, 8); - } else { + } else if ((c - (c % 5)) != 2 || c > 5435) { if (!(c % 20) && c >= 5120) { data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8); data2 = ath5k_hw_bitswap(3, 2); @@ -1924,6 +1921,9 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, data2 = ath5k_hw_bitswap(1, 2); } else return -EINVAL; + } else { + data0 = ath5k_hw_bitswap((10 * (c - 2) - 4800) / 25 + 1, 8); + data2 = ath5k_hw_bitswap(0, 2); } data = (data0 << 4) | (data1 << 1) | (data2 << 2) | 0x1001; @@ -1934,6 +1934,45 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, return 0; } +/* + * Set the channel on the RF2425 + */ +static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + u32 data, data0, data2; + u16 c; + + data = data0 = data2 = 0; + c = channel->center_freq; + + if (c < 4800) { + data0 = ath5k_hw_bitswap((c - 2272), 8); + data2 = 0; + /* ? 5GHz ? */ + } else if ((c - (c % 5)) != 2 || c > 5435) { + if (!(c % 20) && c < 5120) + data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8); + else if (!(c % 10)) + data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8); + else if (!(c % 5)) + data0 = ath5k_hw_bitswap((c - 4800) / 5, 8); + else + return -EINVAL; + data2 = ath5k_hw_bitswap(1, 2); + } else { + data0 = ath5k_hw_bitswap((10 * (c - 2) - 4800) / 25 + 1, 8); + data2 = ath5k_hw_bitswap(0, 2); + } + + data = (data0 << 4) | data2 << 2 | 0x1001; + + ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER); + ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5); + + return 0; +} + /* * Set a channel on the radio chip */ @@ -1963,6 +2002,9 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) case AR5K_RF5111: ret = ath5k_hw_rf5111_channel(ah, channel); break; + case AR5K_RF2425: + ret = ath5k_hw_rf2425_channel(ah, channel); + break; default: ret = ath5k_hw_rf5112_channel(ah, channel); break; @@ -1971,6 +2013,15 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) if (ret) return ret; + /* Set JAPAN setting for channel 14 */ + if (channel->center_freq == 2484) { + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL, + AR5K_PHY_CCKTXCTL_JAPAN); + } else { + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL, + AR5K_PHY_CCKTXCTL_WORLD); + } + ah->ah_current_channel.center_freq = channel->center_freq; ah->ah_current_channel.hw_value = channel->hw_value; ah->ah_turbo = channel->hw_value == CHANNEL_T ? true : false; -- cgit v1.2.3 From f860ee26db51c478fd70039bd4902912a8d93993 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:47:12 +0300 Subject: ath5k: Update phy calibration functions * Enable I/Q calibration each time we have correction results (we were only enabling calibration during reset). If we don't we commit the same results each time calibration routine is called. * Add some documentation and a TODO on nf calibration * Return -EAGAIN on noise floor timeout/failure Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/phy.c | 54 +++++++++++++++++++++++++++++++--------- 1 file changed, 42 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index cbc362d20719..fa0d47faf574 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -2052,6 +2052,8 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) * http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL \ * &p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7245893.PN.&OS=PN/7 * + * XXX: Since during noise floor calibration antennas are detached according to + * the patent, we should stop tx queues here. */ int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq) @@ -2061,7 +2063,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq) s32 noise_floor; /* - * Enable noise floor calibration and wait until completion + * Enable noise floor calibration */ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_NF); @@ -2071,7 +2073,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq) if (ret) { ATH5K_ERR(ah->ah_sc, "noise floor calibration timeout (%uMHz)\n", freq); - return ret; + return -EAGAIN; } /* Wait until the noise floor is calibrated and read the value */ @@ -2093,7 +2095,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq) if (noise_floor > AR5K_TUNE_NOISE_FLOOR) { ATH5K_ERR(ah->ah_sc, "noise floor calibration failed (%uMHz)\n", freq); - return -EIO; + return -EAGAIN; } ah->ah_noise_floor = noise_floor; @@ -2206,38 +2208,66 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, } /* - * Perform a PHY calibration on RF5111/5112 + * Perform a PHY calibration on RF5111/5112 and newer chips */ static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel) { u32 i_pwr, q_pwr; s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd; + int i; ATH5K_TRACE(ah->ah_sc); if (!ah->ah_calibration || - ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) + ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) goto done; - ah->ah_calibration = false; + /* Calibration has finished, get the results and re-run */ + for (i = 0; i <= 10; i++) { + iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR); + i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I); + q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q); + } - iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR); - i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I); - q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q); i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7; - q_coffd = q_pwr >> 6; + q_coffd = q_pwr >> 7; + /* No correction */ if (i_coffd == 0 || q_coffd == 0) goto done; i_coff = ((-iq_corr) / i_coffd) & 0x3f; - q_coff = (((s32)i_pwr / q_coffd) - 64) & 0x1f; - /* Commit new IQ value */ + /* Boundary check */ + if (i_coff > 31) + i_coff = 31; + if (i_coff < -32) + i_coff = -32; + + q_coff = (((s32)i_pwr / q_coffd) - 128) & 0x1f; + + /* Boundary check */ + if (q_coff > 15) + q_coff = 15; + if (q_coff < -16) + q_coff = -16; + + /* Commit new I/Q value */ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE | ((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S)); + /* Re-enable calibration -if we don't we'll commit + * the same values again and again */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_RUN); + done: + + /* TODO: Separate noise floor calibration from I/Q calibration + * since noise floor calibration interrupts rx path while I/Q + * calibration doesn't. We don't need to run noise floor calibration + * as often as I/Q calibration.*/ ath5k_hw_noise_floor_calibration(ah, channel->center_freq); /* Request RF gain */ -- cgit v1.2.3 From 6e28fbef0f330d7c1cade345eeae003d4e5d6070 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Thu, 31 Jul 2008 10:53:57 -0300 Subject: rfkill: query EV_SW states when rfkill-input (re)?connects to a input device Every time a new input device that is capable of one of the rfkill EV_SW events (currently only SW_RFKILL_ALL) is connected to rfkill-input, we must check the states of the input EV_SW switches and take action. Otherwise, we will ignore the initial switch state. We also need to re-check the states of the EV_SW switches after a device that was under an exclusive grab is released back to us, since we got no input events from that device while it was grabbed. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Cc: Dmitry Torokhov Signed-off-by: John W. Linville --- net/rfkill/rfkill-input.c | 54 ++++++++++++++++++++++++++++++++++------------- 1 file changed, 39 insertions(+), 15 deletions(-) diff --git a/net/rfkill/rfkill-input.c b/net/rfkill/rfkill-input.c index 8aa822730145..e5b69556bb5b 100644 --- a/net/rfkill/rfkill-input.c +++ b/net/rfkill/rfkill-input.c @@ -109,6 +109,25 @@ static DEFINE_RFKILL_TASK(rfkill_uwb, RFKILL_TYPE_UWB); static DEFINE_RFKILL_TASK(rfkill_wimax, RFKILL_TYPE_WIMAX); static DEFINE_RFKILL_TASK(rfkill_wwan, RFKILL_TYPE_WWAN); +static void rfkill_schedule_evsw_rfkillall(int state) +{ + /* EVERY radio type. state != 0 means radios ON */ + /* handle EPO (emergency power off) through shortcut */ + if (state) { + rfkill_schedule_set(&rfkill_wwan, + RFKILL_STATE_UNBLOCKED); + rfkill_schedule_set(&rfkill_wimax, + RFKILL_STATE_UNBLOCKED); + rfkill_schedule_set(&rfkill_uwb, + RFKILL_STATE_UNBLOCKED); + rfkill_schedule_set(&rfkill_bt, + RFKILL_STATE_UNBLOCKED); + rfkill_schedule_set(&rfkill_wlan, + RFKILL_STATE_UNBLOCKED); + } else + rfkill_schedule_epo(); +} + static void rfkill_event(struct input_handle *handle, unsigned int type, unsigned int code, int data) { @@ -132,21 +151,7 @@ static void rfkill_event(struct input_handle *handle, unsigned int type, } else if (type == EV_SW) { switch (code) { case SW_RFKILL_ALL: - /* EVERY radio type. data != 0 means radios ON */ - /* handle EPO (emergency power off) through shortcut */ - if (data) { - rfkill_schedule_set(&rfkill_wwan, - RFKILL_STATE_UNBLOCKED); - rfkill_schedule_set(&rfkill_wimax, - RFKILL_STATE_UNBLOCKED); - rfkill_schedule_set(&rfkill_uwb, - RFKILL_STATE_UNBLOCKED); - rfkill_schedule_set(&rfkill_bt, - RFKILL_STATE_UNBLOCKED); - rfkill_schedule_set(&rfkill_wlan, - RFKILL_STATE_UNBLOCKED); - } else - rfkill_schedule_epo(); + rfkill_schedule_evsw_rfkillall(data); break; default: break; @@ -168,6 +173,7 @@ static int rfkill_connect(struct input_handler *handler, struct input_dev *dev, handle->handler = handler; handle->name = "rfkill"; + /* causes rfkill_start() to be called */ error = input_register_handle(handle); if (error) goto err_free_handle; @@ -185,6 +191,23 @@ static int rfkill_connect(struct input_handler *handler, struct input_dev *dev, return error; } +static void rfkill_start(struct input_handle *handle) +{ + /* Take event_lock to guard against configuration changes, we + * should be able to deal with concurrency with rfkill_event() + * just fine (which event_lock will also avoid). */ + spin_lock_irq(&handle->dev->event_lock); + + if (test_bit(EV_SW, handle->dev->evbit)) { + if (test_bit(SW_RFKILL_ALL, handle->dev->swbit)) + rfkill_schedule_evsw_rfkillall(test_bit(SW_RFKILL_ALL, + handle->dev->sw)); + /* add resync for further EV_SW events here */ + } + + spin_unlock_irq(&handle->dev->event_lock); +} + static void rfkill_disconnect(struct input_handle *handle) { input_close_device(handle); @@ -225,6 +248,7 @@ static struct input_handler rfkill_handler = { .event = rfkill_event, .connect = rfkill_connect, .disconnect = rfkill_disconnect, + .start = rfkill_start, .name = "rfkill", .id_table = rfkill_ids, }; -- cgit v1.2.3 From 7c4f4578fc85d42d149f86b47f76c28626a20d92 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Tue, 22 Jul 2008 14:17:37 +0400 Subject: RFKILL: allow one to specify led trigger name Allow the rfkill driver to specify led trigger name. By default it still defaults to the name of rfkill switch. Signed-off-by: Dmitry Baryshkov Acked-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- net/rfkill/rfkill.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index c6f2f388cb72..5c24f3647189 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -589,7 +589,8 @@ static void rfkill_led_trigger_register(struct rfkill *rfkill) #ifdef CONFIG_RFKILL_LEDS int error; - rfkill->led_trigger.name = rfkill->dev.bus_id; + if (!rfkill->led_trigger.name) + rfkill->led_trigger.name = rfkill->dev.bus_id; error = led_trigger_register(&rfkill->led_trigger); if (error) rfkill->led_trigger.name = NULL; -- cgit v1.2.3 From 96185664f10e79d038c084305d3cacff9b52204f Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Tue, 22 Jul 2008 14:21:59 +0400 Subject: RFKILL: set the status of the leds on activation. Provide default activate function to set the state of the led when the led becomes bound to the trigger Signed-off-by: Dmitry Baryshkov Acked-by: Ivo van Doorn Acked-by: Henrique de Moraes Holschuh Signed-off-by: John W. Linville --- net/rfkill/rfkill.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index 5c24f3647189..d2d45655cd1a 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -105,6 +105,16 @@ static void rfkill_led_trigger(struct rfkill *rfkill, #endif /* CONFIG_RFKILL_LEDS */ } +#ifdef CONFIG_RFKILL_LEDS +static void rfkill_led_trigger_activate(struct led_classdev *led) +{ + struct rfkill *rfkill = container_of(led->trigger, + struct rfkill, led_trigger); + + rfkill_led_trigger(rfkill, rfkill->state); +} +#endif /* CONFIG_RFKILL_LEDS */ + static void notify_rfkill_state_change(struct rfkill *rfkill) { blocking_notifier_call_chain(&rfkill_notifier_list, @@ -591,6 +601,8 @@ static void rfkill_led_trigger_register(struct rfkill *rfkill) if (!rfkill->led_trigger.name) rfkill->led_trigger.name = rfkill->dev.bus_id; + if (!rfkill->led_trigger.activate) + rfkill->led_trigger.activate = rfkill_led_trigger_activate; error = led_trigger_register(&rfkill->led_trigger); if (error) rfkill->led_trigger.name = NULL; -- cgit v1.2.3 From dc1968e7b7862bcd2d358c1be6119c011992bdd2 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 23 Jul 2008 13:17:34 +0200 Subject: Ath5k: mask out unneeded interrupts Mask out previously demanded interrupt flags because we set new ones. Don't allow mixing them after switch from sta to ibss and vice versa. Signed-off-by: Jiri Slaby Cc: Nick Kossifidis Cc: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index ff3fad794b61..ebf19bc11f5b 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2170,6 +2170,7 @@ ath5k_beacon_config(struct ath5k_softc *sc) ath5k_hw_set_intr(ah, 0); sc->bmisscount = 0; + sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA); if (sc->opmode == IEEE80211_IF_TYPE_STA) { sc->imask |= AR5K_INT_BMISS; -- cgit v1.2.3 From f8e79ddd31c3615ddca26b9a469c44a7adbd4e13 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 24 Jul 2008 18:46:44 +0300 Subject: mac80211: fix fragmentation kludge This patch make mac80211 transmit correctly fragmented packet after queue was stopped Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- net/mac80211/ieee80211_i.h | 1 + net/mac80211/tx.c | 17 ++++++++++++----- net/mac80211/util.c | 1 + 3 files changed, 14 insertions(+), 5 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index a4f9a832722a..a2e200f9811e 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -586,6 +586,7 @@ struct ieee80211_local { struct timer_list sta_cleanup; unsigned long queues_pending[BITS_TO_LONGS(IEEE80211_MAX_QUEUES)]; + unsigned long queues_pending_run[BITS_TO_LONGS(IEEE80211_MAX_QUEUES)]; struct ieee80211_tx_stored_packet pending_packet[IEEE80211_MAX_QUEUES]; struct tasklet_struct tx_pending_tasklet; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 69019e943873..771ec68b848d 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1060,13 +1060,14 @@ static int ieee80211_tx_prepare(struct ieee80211_tx_data *tx, static int __ieee80211_tx(struct ieee80211_local *local, struct sk_buff *skb, struct ieee80211_tx_data *tx) { - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_tx_info *info; int ret, i; - if (netif_subqueue_stopped(local->mdev, skb)) - return IEEE80211_TX_AGAIN; - if (skb) { + if (netif_subqueue_stopped(local->mdev, skb)) + return IEEE80211_TX_AGAIN; + info = IEEE80211_SKB_CB(skb); + ieee80211_dump_frame(wiphy_name(local->hw.wiphy), "TX to low-level driver", skb); ret = local->ops->tx(local_to_hw(local), skb); @@ -1215,6 +1216,7 @@ retry: if (ret == IEEE80211_TX_FRAG_AGAIN) skb = NULL; + set_bit(queue, local->queues_pending); smp_mb(); /* @@ -1708,14 +1710,19 @@ void ieee80211_tx_pending(unsigned long data) netif_tx_lock_bh(dev); for (i = 0; i < ieee80211_num_regular_queues(&local->hw); i++) { /* Check that this queue is ok */ - if (__netif_subqueue_stopped(local->mdev, i)) + if (__netif_subqueue_stopped(local->mdev, i) && + !test_bit(i, local->queues_pending_run)) continue; if (!test_bit(i, local->queues_pending)) { + clear_bit(i, local->queues_pending_run); ieee80211_wake_queue(&local->hw, i); continue; } + clear_bit(i, local->queues_pending_run); + netif_start_subqueue(local->mdev, i); + store = &local->pending_packet[i]; tx.extra_frag = store->extra_frag; tx.num_extra_frag = store->num_extra_frag; diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 19f85e1b3695..0d463c80c404 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -361,6 +361,7 @@ void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue) struct ieee80211_local *local = hw_to_local(hw); if (test_bit(queue, local->queues_pending)) { + set_bit(queue, local->queues_pending_run); tasklet_schedule(&local->tx_pending_tasklet); } else { netif_wake_subqueue(local->mdev, queue); -- cgit v1.2.3 From 8de394f60235a825b32f30441290a44251eca45d Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Thu, 24 Jul 2008 18:22:55 +0200 Subject: ath5k: remove obsolete declaration of struct ieee80211_hw_mode Signed-off-by: Helmut Schaa Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/debug.h | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/ath5k/debug.h b/drivers/net/wireless/ath5k/debug.h index 2cf8d18b10e3..ffc529393306 100644 --- a/drivers/net/wireless/ath5k/debug.h +++ b/drivers/net/wireless/ath5k/debug.h @@ -63,7 +63,6 @@ struct ath5k_softc; struct ath5k_hw; -struct ieee80211_hw_mode; struct sk_buff; struct ath5k_buf; -- cgit v1.2.3 From 143b09efb74efd3328f57d7a4bd6d7663c1d6497 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 24 Jul 2008 21:33:42 +0300 Subject: iwlwifi: don't stop queue in the middle of fragmented packet This patch avoids stopping queue in the middle of the fragmented packet. It is required that there will be ~10 (max packet/min fragment) or 16 (4 bits of frag number) free tfds all the time. Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-tx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index f72cd0bf6aa3..0182e4da8e35 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -962,16 +962,16 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) if (ret) return ret; - if ((iwl_queue_space(q) < q->high_mark) - && priv->mac80211_registered) { + if ((iwl_queue_space(q) < q->high_mark) && priv->mac80211_registered) { if (wait_write_ptr) { spin_lock_irqsave(&priv->lock, flags); txq->need_update = 1; iwl_txq_update_write_ptr(priv, txq); spin_unlock_irqrestore(&priv->lock, flags); + } else { + ieee80211_stop_queue(priv->hw, + skb_get_queue_mapping(skb)); } - - ieee80211_stop_queue(priv->hw, skb_get_queue_mapping(skb)); } return 0; -- cgit v1.2.3 From 7c7e6af37dad30632103497a72a1273d18ec55fe Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Fri, 25 Jul 2008 19:08:11 +0200 Subject: Rtl8187 PATCH add usb ID for asus wireless link This patch from Davide Cavalca adds a usb ID for an rtl8187L device. Signed-off-by: John W. Linville --- drivers/net/wireless/Kconfig | 1 + drivers/net/wireless/rtl8187_dev.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 91fc2c765d90..4c7ff61a1a9c 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -649,6 +649,7 @@ config RTL8187 Trendnet TEW-424UB ASUS P5B Deluxe Toshiba Satellite Pro series of laptops + Asus Wireless Link Thanks to Realtek for their support! diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 177988efd660..461aa26164c2 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -31,6 +31,8 @@ MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver"); MODULE_LICENSE("GPL"); static struct usb_device_id rtl8187_table[] __devinitdata = { + /* Asus */ + {USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187}, /* Realtek */ {USB_DEVICE(0x0bda, 0x8187), .driver_info = DEVICE_RTL8187}, {USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B}, -- cgit v1.2.3 From d2b690714cd7d328561bfb9bf941edd6a3316a85 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 27 Jul 2008 15:06:05 +0200 Subject: rt2x00: Fix access permissions on debugfs files Although most rt2x00 debugfs files don't contain information which could compromise network security, it is better to set the access permissions to root only. This will be required when HW crypto is implemented, because it could be possible to read the HW key from the registers. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00debug.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 300cf061035f..6bee1d611bbf 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -372,9 +372,6 @@ static ssize_t rt2x00debug_write_##__name(struct file *file, \ if (*offset) \ return 0; \ \ - if (!capable(CAP_NET_ADMIN)) \ - return -EPERM; \ - \ if (intf->offset_##__name >= debug->__name.word_count) \ return -EINVAL; \ \ @@ -454,7 +451,7 @@ static struct dentry *rt2x00debug_create_file_driver(const char *name, data += sprintf(data, "compiled: %s %s\n", __DATE__, __TIME__); blob->size = strlen(blob->data); - return debugfs_create_blob(name, S_IRUGO, intf->driver_folder, blob); + return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob); } static struct dentry *rt2x00debug_create_file_chipset(const char *name, @@ -482,7 +479,7 @@ static struct dentry *rt2x00debug_create_file_chipset(const char *name, data += sprintf(data, "rf length: %d\n", debug->rf.word_count); blob->size = strlen(blob->data); - return debugfs_create_blob(name, S_IRUGO, intf->driver_folder, blob); + return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob); } void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) @@ -517,7 +514,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) if (IS_ERR(intf->chipset_entry)) goto exit; - intf->dev_flags = debugfs_create_file("dev_flags", S_IRUGO, + intf->dev_flags = debugfs_create_file("dev_flags", S_IRUSR, intf->driver_folder, intf, &rt2x00debug_fop_dev_flags); if (IS_ERR(intf->dev_flags)) @@ -532,7 +529,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) ({ \ (__intf)->__name##_off_entry = \ debugfs_create_u32(__stringify(__name) "_offset", \ - S_IRUGO | S_IWUSR, \ + S_IRUSR | S_IWUSR, \ (__intf)->register_folder, \ &(__intf)->offset_##__name); \ if (IS_ERR((__intf)->__name##_off_entry)) \ @@ -540,7 +537,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) \ (__intf)->__name##_val_entry = \ debugfs_create_file(__stringify(__name) "_value", \ - S_IRUGO | S_IWUSR, \ + S_IRUSR | S_IWUSR, \ (__intf)->register_folder, \ (__intf), &rt2x00debug_fop_##__name);\ if (IS_ERR((__intf)->__name##_val_entry)) \ @@ -560,7 +557,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) goto exit; intf->queue_frame_dump_entry = - debugfs_create_file("dump", S_IRUGO, intf->queue_folder, + debugfs_create_file("dump", S_IRUSR, intf->queue_folder, intf, &rt2x00debug_fop_queue_dump); if (IS_ERR(intf->queue_frame_dump_entry)) goto exit; @@ -569,7 +566,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) init_waitqueue_head(&intf->frame_dump_waitqueue); intf->queue_stats_entry = - debugfs_create_file("queue", S_IRUGO, intf->queue_folder, + debugfs_create_file("queue", S_IRUSR, intf->queue_folder, intf, &rt2x00debug_fop_queue_stats); return; -- cgit v1.2.3 From ada662f3eb6231ab27f5e6366d4e5c395d25edd3 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 27 Jul 2008 15:06:21 +0200 Subject: rt2x00: Fix partial antenna configuration The if-statement to determine the new TX/RX antenna configuration was incomplete. It lacks the general else-clause when the antenna wasn't changed. This is a correct event, since it can occur when only one of the antenna's has been changed or when the new configuration is being forced (like when the interface has just been added). Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00config.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 3f89516e8332..d134c3be539a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -254,6 +254,8 @@ config: libconf.ant.rx = default_ant->rx; else if (active_ant->rx == ANTENNA_SW_DIVERSITY) libconf.ant.rx = ANTENNA_B; + else + libconf.ant.rx = active_ant->rx; if (conf->antenna_sel_tx) libconf.ant.tx = conf->antenna_sel_tx; @@ -261,6 +263,8 @@ config: libconf.ant.tx = default_ant->tx; else if (active_ant->tx == ANTENNA_SW_DIVERSITY) libconf.ant.tx = ANTENNA_B; + else + libconf.ant.tx = active_ant->tx; } if (flags & CONFIG_UPDATE_SLOT_TIME) { -- cgit v1.2.3 From e6d3e902088ac5da77b074f513e3cb80422ff471 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 27 Jul 2008 15:06:50 +0200 Subject: rt2x00: rt61pci needs another millisecond after firmware upload After the hardware has indicated the firmware upload has completed and the device is ready, we should wait another millisecond to make sure the device is really ready to continue. Without this timout, bringing the interface down and up again will fail due to incorrect register initialization. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt61pci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index fbe2a652e014..087e90b328cd 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1003,6 +1003,11 @@ static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, return -EBUSY; } + /* + * Hardware needs another millisecond before it is ready. + */ + msleep(1); + /* * Reset MAC and BBP registers. */ -- cgit v1.2.3 From 8d8acd46fb7e962ac04baef5a118d431fae6b0f6 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 28 Jul 2008 10:20:12 +0200 Subject: rt2x00: Fix VGC lower bound initialization When the EEPROM_BBPTUNE_VGC word is valid, we should override EEPROM_BBPTUNE_VGCLOWER field with the BBP value. And we should _not_ do that when EEPROM_BBPTUNE_R17 is valid. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2500usb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 3078417b326b..c6f6eb6e17a1 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1376,6 +1376,9 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp); rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word); + } else { + rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp); + rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); } rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word); @@ -1384,9 +1387,6 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41); rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word); EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word); - } else { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); } rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word); -- cgit v1.2.3 From d4764b29b6e0f1608e397930677928e5a3f62bba Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 28 Jul 2008 10:21:16 +0200 Subject: rt2x00: Sequence counter should be protected in irqsave The sequence counter can be accessed in IRQ context, which means the lock protecting the counter should be irqsave. To prevent making the entire intf->lock irqsave without reason, create a new lock which only protects the sequence counter. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 6 ++++++ drivers/net/wireless/rt2x00/rt2x00mac.c | 1 + drivers/net/wireless/rt2x00/rt2x00queue.c | 5 +++-- 3 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index db2dc976d831..8b10ea41b204 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -368,6 +368,12 @@ struct rt2x00_intf { #define DELAYED_CONFIG_ERP 0x00000002 #define DELAYED_LED_ASSOC 0x00000004 + /* + * Software sequence counter, this is only required + * for hardware which doesn't support hardware + * sequence counting. + */ + spinlock_t seqlock; u16 seqno; }; diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index c3ee4ecba792..bd422fd6a894 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -247,6 +247,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, rt2x00dev->intf_sta_count++; spin_lock_init(&intf->lock); + spin_lock_init(&intf->seqlock); intf->beacon = entry; if (conf->type == IEEE80211_IF_TYPE_AP) diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 3b27f6aa860c..898cdd7f57d9 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -128,6 +128,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, unsigned int data_length; unsigned int duration; unsigned int residual; + unsigned long irqflags; memset(txdesc, 0, sizeof(*txdesc)); @@ -213,14 +214,14 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, * sequence counter given by mac80211. */ if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { - spin_lock(&intf->lock); + spin_lock_irqsave(&intf->seqlock, irqflags); if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) intf->seqno += 0x10; hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); hdr->seq_ctrl |= cpu_to_le16(intf->seqno); - spin_unlock(&intf->lock); + spin_unlock_irqrestore(&intf->seqlock, irqflags); __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); } -- cgit v1.2.3 From 3b72b01d3ab623c296df49f2d71d40a38bcfb4b3 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 29 Jul 2008 13:50:39 -0400 Subject: libertas: only enable rtap with mesh firmware Since only mesh-enabled firmware has the CMD_802_11_MONITOR_MODE on which the rtap functionality depends, only expose the rtap functionality when mesh is also available. Signed-off-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/main.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 14d5d61cec4c..bd32ac0b4e07 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -297,9 +297,7 @@ static ssize_t lbs_rtap_set(struct device *dev, lbs_add_rtap(priv); } priv->monitormode = monitor_mode; - } - - else { + } else { if (!priv->monitormode) return strlen(buf); priv->monitormode = 0; @@ -1242,8 +1240,6 @@ int lbs_start_card(struct lbs_private *priv) lbs_pr_err("cannot register ethX device\n"); goto done; } - if (device_create_file(&dev->dev, &dev_attr_lbs_rtap)) - lbs_pr_err("cannot register lbs_rtap attribute\n"); lbs_update_channel(priv); @@ -1275,6 +1271,13 @@ int lbs_start_card(struct lbs_private *priv) if (device_create_file(&dev->dev, &dev_attr_lbs_mesh)) lbs_pr_err("cannot register lbs_mesh attribute\n"); + + /* While rtap isn't related to mesh, only mesh-enabled + * firmware implements the rtap functionality via + * CMD_802_11_MONITOR_MODE. + */ + if (device_create_file(&dev->dev, &dev_attr_lbs_rtap)) + lbs_pr_err("cannot register lbs_rtap attribute\n"); } } @@ -1306,9 +1309,9 @@ void lbs_stop_card(struct lbs_private *priv) netif_carrier_off(priv->dev); lbs_debugfs_remove_one(priv); - device_remove_file(&dev->dev, &dev_attr_lbs_rtap); if (priv->mesh_tlv) { device_remove_file(&dev->dev, &dev_attr_lbs_mesh); + device_remove_file(&dev->dev, &dev_attr_lbs_rtap); } /* Flush pending command nodes */ -- cgit v1.2.3 From bf4634afd8bb72936d2d56425ec792ca1bfa92a2 Mon Sep 17 00:00:00 2001 From: Peter Chubb Date: Thu, 31 Jul 2008 10:56:34 +1000 Subject: rt2500pci: restoring missing line In kernel version 2.6.26-rc9 my wireless LAN card worked; but in the released 2.6.26, my RaLink rt2500 card wouldn't associate. Git-bisect led me to this patch: 61486e0f68d1f8966c09b734566a187d42d65c54 rt2x00: Remove ieee80211_tx_control argument from write_tx_desc() I believe that there is a problem with that patch --- it (inadvertantly) removes an extra line of code, that used to set the DATABYTE_COUNT field. This patch reinstates that line, and with it my card works again. Signed-off-by: Peter Chubb Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2500pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index aa6dfb811c71..181a146b4768 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1220,6 +1220,7 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); rt2x00_desc_write(txd, 0, word); } -- cgit v1.2.3 From 7dcdd073bf78bb6958bbc12a1a47754a0f3c4721 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 31 Jul 2008 19:30:48 -0500 Subject: rtl8187: Fix lockups due to concurrent access to config routine Some users of the RTL8187B have experienced difficulties since commit 49292d56352a6ab90d04c3448dd8b6106dfef2d6 that introduced the power management wext hooks. This difficulty has not made much sense until it was realized that it was possible for mac80211 to make a call to the config routine while that routine was already being executed. On this device, it is necessary to loopback the TX when changing channels. Unless this is properly restored, the device will lockup. A mutex now protects the device state, and the private data in several places. The problem was found by Herton Ronaldo Krzesinski , who also suggested this type of fix. Signed-off-by: Larry Finger Acked-by: Herton Ronaldo Krzesinski Acked-by: Hin-Tak Leung Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8187.h | 4 ++++ drivers/net/wireless/rtl8187_dev.c | 15 ++++++++++++++- 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h index 1b0d750f6623..5a9515c99960 100644 --- a/drivers/net/wireless/rtl8187.h +++ b/drivers/net/wireless/rtl8187.h @@ -94,6 +94,10 @@ struct rtl8187_priv { const struct rtl818x_rf_ops *rf; struct ieee80211_vif *vif; int mode; + /* The mutex protects the TX loopback state. + * Any attempt to set channels concurrently locks the device. + */ + struct mutex conf_mutex; /* rtl8187 specific */ struct ieee80211_channel channels[14]; diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 461aa26164c2..57376fb993ed 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -728,6 +728,7 @@ static int rtl8187_start(struct ieee80211_hw *dev) if (ret) return ret; + mutex_lock(&priv->conf_mutex); if (priv->is_rtl8187b) { reg = RTL818X_RX_CONF_MGMT | RTL818X_RX_CONF_DATA | @@ -749,6 +750,7 @@ static int rtl8187_start(struct ieee80211_hw *dev) (7 << 0 /* long retry limit */) | (7 << 21 /* MAX TX DMA */)); rtl8187_init_urbs(dev); + mutex_unlock(&priv->conf_mutex); return 0; } @@ -792,6 +794,7 @@ static int rtl8187_start(struct ieee80211_hw *dev) reg |= RTL818X_CMD_TX_ENABLE; reg |= RTL818X_CMD_RX_ENABLE; rtl818x_iowrite8(priv, &priv->map->CMD, reg); + mutex_unlock(&priv->conf_mutex); return 0; } @@ -803,6 +806,7 @@ static void rtl8187_stop(struct ieee80211_hw *dev) struct sk_buff *skb; u32 reg; + mutex_lock(&priv->conf_mutex); rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); reg = rtl818x_ioread8(priv, &priv->map->CMD); @@ -822,7 +826,7 @@ static void rtl8187_stop(struct ieee80211_hw *dev) usb_kill_urb(info->urb); kfree_skb(skb); } - return; + mutex_unlock(&priv->conf_mutex); } static int rtl8187_add_interface(struct ieee80211_hw *dev, @@ -842,6 +846,7 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev, return -EOPNOTSUPP; } + mutex_lock(&priv->conf_mutex); priv->vif = conf->vif; rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); @@ -850,6 +855,7 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev, ((u8 *)conf->mac_addr)[i]); rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + mutex_unlock(&priv->conf_mutex); return 0; } @@ -857,8 +863,10 @@ static void rtl8187_remove_interface(struct ieee80211_hw *dev, struct ieee80211_if_init_conf *conf) { struct rtl8187_priv *priv = dev->priv; + mutex_lock(&priv->conf_mutex); priv->mode = IEEE80211_IF_TYPE_MNTR; priv->vif = NULL; + mutex_unlock(&priv->conf_mutex); } static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) @@ -866,6 +874,7 @@ static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) struct rtl8187_priv *priv = dev->priv; u32 reg; + mutex_lock(&priv->conf_mutex); reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); /* Enable TX loopback on MAC level to avoid TX during channel * changes, as this has be seen to causes problems and the @@ -898,6 +907,7 @@ static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100); rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100); rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100); + mutex_unlock(&priv->conf_mutex); return 0; } @@ -909,6 +919,7 @@ static int rtl8187_config_interface(struct ieee80211_hw *dev, int i; u8 reg; + mutex_lock(&priv->conf_mutex); for (i = 0; i < ETH_ALEN; i++) rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]); @@ -922,6 +933,7 @@ static int rtl8187_config_interface(struct ieee80211_hw *dev, rtl818x_iowrite8(priv, &priv->map->MSR, reg); } + mutex_unlock(&priv->conf_mutex); return 0; } @@ -1189,6 +1201,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, printk(KERN_ERR "rtl8187: Cannot register device\n"); goto err_free_dev; } + mutex_init(&priv->conf_mutex); printk(KERN_INFO "%s: hwaddr %s, %s V%d + %s\n", wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr), -- cgit v1.2.3 From fb55d887c5bd9054ec069534e1ef9eb8d9a983c6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 31 Jul 2008 19:02:06 +0200 Subject: ipw2200 - Fix bad ipw_write8() macro ipw_write8() can't be used alone with a loop because of a wrong definition. CC [M] drivers/net/wireless/ipw2200.o drivers/net/wireless/ipw2200.c: In function 'ipw_ethtool_set_eeprom': drivers/net/wireless/ipw2200.c:10579: warning: array subscript is above array bounds drivers/net/wireless/ipw2200.c: In function 'ipw_load': drivers/net/wireless/ipw2200.c:2663: warning: array subscript is above array bounds Add missing do {} while (0) to fix them. Signed-off-by: Takashi Iwai Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2200.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 1acfbcd3703c..9509fd2a25f8 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -305,9 +305,10 @@ static inline void ipw_write_reg32(struct ipw_priv *a, u32 b, u32 c) #define _ipw_write8(ipw, ofs, val) writeb((val), (ipw)->hw_base + (ofs)) /* 8-bit direct write (for low 4K of SRAM/regs), with debug wrapper */ -#define ipw_write8(ipw, ofs, val) \ +#define ipw_write8(ipw, ofs, val) do { \ IPW_DEBUG_IO("%s %d: write_direct8(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(ofs), (u32)(val)); \ - _ipw_write8(ipw, ofs, val) + _ipw_write8(ipw, ofs, val); \ + } while (0) /* 16-bit direct write (low 4K) */ #define _ipw_write16(ipw, ofs, val) writew((val), (ipw)->hw_base + (ofs)) -- cgit v1.2.3 From 3d0f823953e6b5aa36fc098de2d27e15da220974 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 31 Jul 2008 19:03:10 +0200 Subject: prism54 - Use offsetof() Use the standard offsetof() macro to fix a compile warning below: CC [M] drivers/net/wireless/prism54/isl_ioctl.o drivers/net/wireless/prism54/isl_ioctl.c: In function 'prism2_ioctl_set_generic_element': drivers/net/wireless/prism54/isl_ioctl.c:2658: warning: cast from pointer to integer of different size Signed-off-by: Takashi Iwai Signed-off-by: John W. Linville --- drivers/net/wireless/prism54/isl_ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index 97fa14e0a479..3d75a7137d3c 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -2518,7 +2518,7 @@ enum { #define PRISM2_HOSTAPD_MAX_BUF_SIZE 1024 #define PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN \ -((int) (&((struct prism2_hostapd_param *) 0)->u.generic_elem.data)) + offsetof(struct prism2_hostapd_param, u.generic_elem.data) /* Maximum length for algorithm names (-1 for nul termination) * used in ioctl() */ -- cgit v1.2.3 From 56decd3c5758b0d776c073f65f777beb7a05ac0a Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Fri, 1 Aug 2008 12:54:27 +0300 Subject: iwl3945: Fix statistics in monitor mode iwl3945_rx_reply_rx was sending packets too early to mac80211, before updating signal strength/quality. This resulted in garbage power levels. Signed-off-by: Maxim Levitsky Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index a51e0eaa1334..56a9361a847f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -710,10 +710,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, return; } - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { - iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status); - return; - } + /* Convert 3945's rssi indicator to dBm */ rx_status.signal = rx_stats->rssi - IWL_RSSI_OFFSET; @@ -775,6 +772,11 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, priv->last_rx_noise = rx_status.noise; } + if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { + iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status); + return; + } + switch (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FTYPE) { case IEEE80211_FTYPE_MGMT: switch (le16_to_cpu(header->frame_control) & -- cgit v1.2.3 From daf423db3b6afd90ecdd776dbc32c0b57cc78edb Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 30 Jul 2008 10:29:39 +1000 Subject: kdump: sh: parse elfcorehdr command line argument A quick cut and paste from other architectures to allow SH to parse the elfcorehdr command line argument which is required for both is_kdump_kernel() and vmcore to function. (the former is as yet unused on SH). Tested compilation only Signed-off-by: Simon Horman Signed-off-by: Paul Mundt --- arch/sh/kernel/setup.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 6339d0c95715..a35207655e7b 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -286,6 +287,25 @@ static void __init setup_memory(void) extern void __init setup_memory(void); #endif +/* + * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by + * is_kdump_kernel() to determine if we are booting after a panic. Hence + * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE. + */ +#ifdef CONFIG_CRASH_DUMP +/* elfcorehdr= specifies the location of elf core header + * stored by the crashed kernel. + */ +static int __init parse_elfcorehdr(char *arg) +{ + if (!arg) + return -EINVAL; + elfcorehdr_addr = memparse(arg, &arg); + return 0; +} +early_param("elfcorehdr", parse_elfcorehdr); +#endif + void __init setup_arch(char **cmdline_p) { enable_mmu(); -- cgit v1.2.3 From cec3fd3e2a7cacf37e2bd6d9fa915337245cc563 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 13:11:26 +0900 Subject: sh: Tidy up the _TIF work masks, and fix syscall trace bug on singlestep. Signed-off-by: Paul Mundt --- arch/sh/include/asm/thread_info.h | 40 +++++++++++++++++++++++++++------------ arch/sh/kernel/cpu/sh5/entry.S | 2 +- arch/sh/kernel/entry-common.S | 4 ++-- 3 files changed, 31 insertions(+), 15 deletions(-) diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h index eeb4c747119e..c05b1afd1324 100644 --- a/arch/sh/include/asm/thread_info.h +++ b/arch/sh/include/asm/thread_info.h @@ -123,18 +123,34 @@ static inline struct thread_info *current_thread_info(void) #define TIF_MEMDIE 18 #define TIF_FREEZE 19 -#define _TIF_SYSCALL_TRACE (1<flags ! r8: current_thread_info - tst #_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | _TIF_SYSCALL_AUDIT, r0 + tst #_TIF_WORK_SYSCALL_MASK, r0 bt/s work_pending tst #_TIF_NEED_RESCHED, r0 #ifdef CONFIG_TRACE_IRQFLAGS @@ -351,7 +351,7 @@ ENTRY(system_call) ! get_current_thread_info r8, r10 mov.l @(TI_FLAGS,r8), r8 - mov #(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT), r10 + mov #_TIF_WORK_SYSCALL_MASK, r10 tst r10, r8 bf syscall_trace_entry ! -- cgit v1.2.3 From c4637d475170ca0d99973efd07df727012db6cd1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 15:30:52 +0900 Subject: sh: seccomp support. This hooks up the seccomp thread flag and associated callback from the syscall tracer. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 17 +++++++++++++++++ arch/sh/include/asm/seccomp.h | 10 ++++++++++ arch/sh/include/asm/thread_info.h | 6 ++++-- arch/sh/kernel/ptrace_32.c | 3 +++ arch/sh/kernel/ptrace_64.c | 3 +++ 5 files changed, 37 insertions(+), 2 deletions(-) create mode 100644 arch/sh/include/asm/seccomp.h diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index cb992c3d6b71..0ae541107f3f 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -483,6 +483,23 @@ config CRASH_DUMP For more details see Documentation/kdump/kdump.txt +config SECCOMP + bool "Enable seccomp to safely compute untrusted bytecode" + depends on PROC_FS + default y + help + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via prctl, it cannot be disabled and the task is only + allowed to execute a few safe syscalls defined by each seccomp + mode. + + If unsure, say N. + config SMP bool "Symmetric multi-processing support" depends on SYS_SUPPORTS_SMP diff --git a/arch/sh/include/asm/seccomp.h b/arch/sh/include/asm/seccomp.h new file mode 100644 index 000000000000..3280ed3802ef --- /dev/null +++ b/arch/sh/include/asm/seccomp.h @@ -0,0 +1,10 @@ +#ifndef __ASM_SECCOMP_H + +#include + +#define __NR_seccomp_read __NR_read +#define __NR_seccomp_write __NR_write +#define __NR_seccomp_exit __NR_exit +#define __NR_seccomp_sigreturn __NR_rt_sigreturn + +#endif /* __ASM_SECCOMP_H */ diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h index c05b1afd1324..03d1e386670c 100644 --- a/arch/sh/include/asm/thread_info.h +++ b/arch/sh/include/asm/thread_info.h @@ -117,7 +117,8 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ #define TIF_RESTORE_SIGMASK 3 /* restore signal mask in do_signal() */ #define TIF_SINGLESTEP 4 /* singlestepping active */ -#define TIF_SYSCALL_AUDIT 5 +#define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */ +#define TIF_SECCOMP 6 /* secure computing */ #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 18 @@ -129,6 +130,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) +#define _TIF_SECCOMP (1 << TIF_SECCOMP) #define _TIF_USEDFPU (1 << TIF_USEDFPU) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_FREEZE (1 << TIF_FREEZE) @@ -141,7 +143,7 @@ static inline struct thread_info *current_thread_info(void) /* work to do in syscall trace */ #define _TIF_WORK_SYSCALL_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \ - _TIF_SYSCALL_AUDIT) + _TIF_SYSCALL_AUDIT | _TIF_SECCOMP) /* work to do on any return to u-space */ #define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \ diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index 2bc72def5cf8..e9bd4b2aa9c2 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -276,6 +277,8 @@ asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) { struct task_struct *tsk = current; + secure_computing(regs->regs[0]); + if (unlikely(current->audit_context) && entryexit) audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]), regs->regs[0]); diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index d453c47dc522..7d8776260953 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -277,6 +278,8 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int entryexit) { struct task_struct *tsk = current; + secure_computing(regs->regs[9]); + if (unlikely(current->audit_context) && entryexit) audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]), regs->regs[9]); -- cgit v1.2.3 From c459dbf294b4a3d70490a468a7ca3907fb2c2f57 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 19:09:31 +0900 Subject: sh: ptrace single stepping cleanups. This converts the single stepping done by sh/sh64 ptrace implementations to use the generic user_enable/disable_single_step(), and subsequently rips out a lot of ptrace request cases that are now handled generically. Signed-off-by: Paul Mundt --- arch/sh/include/asm/ptrace.h | 9 +++++ arch/sh/kernel/ptrace_32.c | 93 +++++++++----------------------------------- arch/sh/kernel/ptrace_64.c | 77 ++++++------------------------------ 3 files changed, 39 insertions(+), 140 deletions(-) diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index 643ab5a7cf3b..b86aeabba61a 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -104,6 +104,15 @@ struct pt_dspregs { extern void show_regs(struct pt_regs *); +/* + * These are defined as per linux/ptrace.h. + */ +struct task_struct; + +#define arch_has_single_step() (1) +extern void user_enable_single_step(struct task_struct *); +extern void user_disable_single_step(struct task_struct *); + #ifdef CONFIG_SH_DSP #define task_pt_regs(task) \ ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index e9bd4b2aa9c2..ff66f97c564d 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -58,7 +58,23 @@ static inline int put_stack_long(struct task_struct *task, int offset, return 0; } -static void ptrace_disable_singlestep(struct task_struct *child) +void user_enable_single_step(struct task_struct *child) +{ + struct pt_regs *regs = task_pt_regs(child); + long pc; + + pc = get_stack_long(child, (long)®s->pc); + + /* Next scheduling will set up UBC */ + if (child->thread.ubc_pc == 0) + ubc_usercnt += 1; + + child->thread.ubc_pc = pc; + + set_tsk_thread_flag(child, TIF_SINGLESTEP); +} + +void user_disable_single_step(struct task_struct *child) { clear_tsk_thread_flag(child, TIF_SINGLESTEP); @@ -82,7 +98,7 @@ static void ptrace_disable_singlestep(struct task_struct *child) */ void ptrace_disable(struct task_struct *child) { - ptrace_disable_singlestep(child); + user_disable_single_step(child); } long arch_ptrace(struct task_struct *child, long request, long addr, long data) @@ -91,12 +107,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) int ret; switch (request) { - /* when I and D space are separate, these will need to be fixed. */ - case PTRACE_PEEKTEXT: /* read word at location addr. */ - case PTRACE_PEEKDATA: - ret = generic_ptrace_peekdata(child, addr, data); - break; - /* read the word at location addr in the USER area. */ case PTRACE_PEEKUSR: { unsigned long tmp; @@ -126,12 +136,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } - /* when I and D space are separate, this will have to be fixed. */ - case PTRACE_POKETEXT: /* write the word at location addr. */ - case PTRACE_POKEDATA: - ret = generic_ptrace_pokedata(child, addr, data); - break; - case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ ret = -EIO; if ((addr & 3) || addr < 0 || @@ -152,67 +156,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } break; - case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ - case PTRACE_CONT: { /* restart after signal. */ - ret = -EIO; - if (!valid_signal(data)) - break; - if (request == PTRACE_SYSCALL) - set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - else - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - - ptrace_disable_singlestep(child); - - child->exit_code = data; - wake_up_process(child); - ret = 0; - break; - } - -/* - * make the child exit. Best I can do is send it a sigkill. - * perhaps it should be put in the status that it wants to - * exit. - */ - case PTRACE_KILL: { - ret = 0; - if (child->exit_state == EXIT_ZOMBIE) /* already dead */ - break; - ptrace_disable_singlestep(child); - child->exit_code = SIGKILL; - wake_up_process(child); - break; - } - - case PTRACE_SINGLESTEP: { /* set the trap flag. */ - long pc; - struct pt_regs *regs = NULL; - - ret = -EIO; - if (!valid_signal(data)) - break; - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - if ((child->ptrace & PT_DTRACE) == 0) { - /* Spurious delayed TF traps may occur */ - child->ptrace |= PT_DTRACE; - } - - pc = get_stack_long(child, (long)®s->pc); - - /* Next scheduling will set up UBC */ - if (child->thread.ubc_pc == 0) - ubc_usercnt += 1; - child->thread.ubc_pc = pc; - - set_tsk_thread_flag(child, TIF_SINGLESTEP); - child->exit_code = data; - /* give it a chance to run. */ - wake_up_process(child); - ret = 0; - break; - } - #ifdef CONFIG_SH_DSP case PTRACE_GETDSPREGS: { unsigned long dp; diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index 7d8776260953..108f3962e39a 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -121,18 +121,23 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data) return 0; } +void user_enable_single_step(struct task_struct *child) +{ + struct pt_regs *regs = child->thread.uregs; + + regs->sr |= SR_SSTEP; /* auto-resetting upon exception */ +} + +void user_disable_single_step(struct task_struct *child) +{ + regs->sr &= ~SR_SSTEP; +} long arch_ptrace(struct task_struct *child, long request, long addr, long data) { int ret; switch (request) { - /* when I and D space are separate, these will need to be fixed. */ - case PTRACE_PEEKTEXT: /* read word at location addr. */ - case PTRACE_PEEKDATA: - ret = generic_ptrace_peekdata(child, addr, data); - break; - /* read the word at location addr in the USER area. */ case PTRACE_PEEKUSR: { unsigned long tmp; @@ -155,12 +160,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } - /* when I and D space are separate, this will have to be fixed. */ - case PTRACE_POKETEXT: /* write the word at location addr. */ - case PTRACE_POKEDATA: - ret = generic_ptrace_pokedata(child, addr, data); - break; - case PTRACE_POKEUSR: /* write the word at location addr in the USER area. We must disallow any changes to certain SR bits or u_fpvalid, since @@ -192,58 +191,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } break; - case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ - case PTRACE_CONT: { /* restart after signal. */ - ret = -EIO; - if (!valid_signal(data)) - break; - if (request == PTRACE_SYSCALL) - set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - else - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - child->exit_code = data; - wake_up_process(child); - ret = 0; - break; - } - -/* - * make the child exit. Best I can do is send it a sigkill. - * perhaps it should be put in the status that it wants to - * exit. - */ - case PTRACE_KILL: { - ret = 0; - if (child->exit_state == EXIT_ZOMBIE) /* already dead */ - break; - child->exit_code = SIGKILL; - wake_up_process(child); - break; - } - - case PTRACE_SINGLESTEP: { /* set the trap flag. */ - struct pt_regs *regs; - - ret = -EIO; - if (!valid_signal(data)) - break; - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - if ((child->ptrace & PT_DTRACE) == 0) { - /* Spurious delayed TF traps may occur */ - child->ptrace |= PT_DTRACE; - } - - regs = child->thread.uregs; - - regs->sr |= SR_SSTEP; /* auto-resetting upon exception */ - - child->exit_code = data; - /* give it a chance to run. */ - wake_up_process(child); - ret = 0; - break; - } - default: ret = ptrace_request(child, request, addr, data); break; @@ -341,5 +288,5 @@ asmlinkage void do_software_break_point(unsigned long long vec, */ void ptrace_disable(struct task_struct *child) { - /* nothing to do.. */ + user_disable_single_step(child); } -- cgit v1.2.3 From ab99c733ae73cce31f2a2434f7099564e5a73d95 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 19:55:30 +0900 Subject: sh: Make syscall tracer use tracehook notifiers, add TIF_NOTIFY_RESUME. This follows the changes in commits: 7d6d637dac2050f30a1b57b0a3dc5de4a10616ba 4f72c4279eab1e5f3ed1ac4e55d4527617582392 on powerpc. Adding in TIF_NOTIFY_RESUME, and cleaning up the syscall tracing to be more generic. This is an incremental step to turning on tracehook, as well as unifying more of the ptrace and signal code across the 32/64 split. Signed-off-by: Paul Mundt --- arch/sh/include/asm/thread_info.h | 11 ++- arch/sh/kernel/cpu/sh5/entry.S | 17 ++-- arch/sh/kernel/entry-common.S | 12 ++- arch/sh/kernel/ptrace_32.c | 54 ++++++------- arch/sh/kernel/ptrace_64.c | 50 ++++++------ arch/sh/kernel/signal_32.c | 22 +++-- arch/sh/kernel/signal_64.c | 166 ++++++++++++++++++++------------------ 7 files changed, 174 insertions(+), 158 deletions(-) diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h index 03d1e386670c..0a894cafb1dd 100644 --- a/arch/sh/include/asm/thread_info.h +++ b/arch/sh/include/asm/thread_info.h @@ -119,10 +119,11 @@ static inline struct thread_info *current_thread_info(void) #define TIF_SINGLESTEP 4 /* singlestepping active */ #define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */ #define TIF_SECCOMP 6 /* secure computing */ +#define TIF_NOTIFY_RESUME 7 /* callback before returning to user */ #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 18 -#define TIF_FREEZE 19 +#define TIF_FREEZE 19 /* Freezing for suspend */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) @@ -131,6 +132,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_USEDFPU (1 << TIF_USEDFPU) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_FREEZE (1 << TIF_FREEZE) @@ -146,9 +148,10 @@ static inline struct thread_info *current_thread_info(void) _TIF_SYSCALL_AUDIT | _TIF_SECCOMP) /* work to do on any return to u-space */ -#define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \ - _TIF_NEED_RESCHED | _TIF_SYSCALL_AUDIT | \ - _TIF_SINGLESTEP | _TIF_RESTORE_SIGMASK) +#define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \ + _TIF_NEED_RESCHED | _TIF_SYSCALL_AUDIT | \ + _TIF_SINGLESTEP | _TIF_RESTORE_SIGMASK | \ + _TIF_NOTIFY_RESUME) /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK (_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \ diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index bba331d5ef74..04c7da968146 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -987,11 +987,11 @@ work_resched: work_notifysig: gettr tr1, LINK - movi do_signal, r6 + movi do_notify_resume, r6 ptabs r6, tr0 or SP, ZERO, r2 - or ZERO, ZERO, r3 - blink tr0, LINK /* Call do_signal(regs, 0), return here */ + or r7, ZERO, r3 + blink tr0, LINK /* Call do_notify_resume(regs, current_thread_info->flags), return here */ restore_all: /* Do prefetches */ @@ -1305,13 +1305,15 @@ syscall_allowed: beq/l r6, ZERO, tr0 /* Trace it by calling syscall_trace before and after */ - movi syscall_trace, r4 + movi do_syscall_trace_enter, r4 or SP, ZERO, r2 - or ZERO, ZERO, r3 ptabs r4, tr0 blink tr0, LINK - /* Reload syscall number as r5 is trashed by syscall_trace */ + /* Save the retval */ + st.q SP, FRAME_R(2), r2 + + /* Reload syscall number as r5 is trashed by do_syscall_trace_enter */ ld.q SP, FRAME_S(FSYSCALL_ID), r5 andi r5, 0x1ff, r5 @@ -1343,9 +1345,8 @@ syscall_ret_trace: /* We get back here only if under trace */ st.q SP, FRAME_R(9), r2 /* Save return value */ - movi syscall_trace, LINK + movi do_syscall_trace_leave, LINK or SP, ZERO, r2 - movi 1, r3 ptabs LINK, tr0 blink tr0, LINK diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index a34417c8ee0a..0bc17def55a7 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -211,10 +211,8 @@ syscall_exit_work: nop #endif sti - ! XXX setup arguments... mov r15, r4 - mov #1, r5 - mov.l 4f, r0 ! do_syscall_trace + mov.l 8f, r0 ! do_syscall_trace_leave jsr @r0 nop bra resume_userspace @@ -223,12 +221,11 @@ syscall_exit_work: .align 2 syscall_trace_entry: ! Yes it is traced. - ! XXX setup arguments... mov r15, r4 - mov #0, r5 - mov.l 4f, r11 ! Call do_syscall_trace which notifies + mov.l 7f, r11 ! Call do_syscall_trace_enter which notifies jsr @r11 ! superior (will chomp R[0-7]) nop + mov.l r0, @(OFF_R0,r15) ! Save return value ! Reload R0-R4 from kernel stack, where the ! parent may have modified them using ! ptrace(POKEUSR). (Note that R0-R2 are @@ -389,8 +386,9 @@ syscall_exit: #endif 2: .long NR_syscalls 3: .long sys_call_table -4: .long do_syscall_trace #ifdef CONFIG_TRACE_IRQFLAGS 5: .long trace_hardirqs_on 6: .long trace_hardirqs_off #endif +7: .long do_syscall_trace_enter +8: .long do_syscall_trace_leave diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index ff66f97c564d..f48769b23bd6 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -216,41 +217,38 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return ret; } -asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) +asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) { - struct task_struct *tsk = current; + long ret = 0; secure_computing(regs->regs[0]); - if (unlikely(current->audit_context) && entryexit) - audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]), - regs->regs[0]); - - if (!test_thread_flag(TIF_SYSCALL_TRACE) && - !test_thread_flag(TIF_SINGLESTEP)) - goto out; - if (!(tsk->ptrace & PT_PTRACED)) - goto out; - - /* the 0x80 provides a way for the tracing parent to distinguish - between a syscall stop and SIGTRAP delivery */ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) && - !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0)); - - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (tsk->exit_code) { - send_sig(tsk->exit_code, tsk, 1); - tsk->exit_code = 0; - } + if (test_thread_flag(TIF_SYSCALL_TRACE) && + tracehook_report_syscall_entry(regs)) + /* + * Tracing decided this syscall should not happen. + * We'll return a bogus call number to get an ENOSYS + * error, but leave the original number in regs->regs[0]. + */ + ret = -1L; -out: - if (unlikely(current->audit_context) && !entryexit) + if (unlikely(current->audit_context)) audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[3], regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]); + return ret ?: regs->regs[0]; +} + +asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) +{ + int step; + + if (unlikely(current->audit_context)) + audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]), + regs->regs[0]); + + step = test_thread_flag(TIF_SINGLESTEP); + if (step || test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, step); } diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index 108f3962e39a..236d8bef9ccd 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -221,40 +222,37 @@ asmlinkage int sh64_ptrace(long request, long pid, long addr, long data) return sys_ptrace(request, pid, addr, data); } -asmlinkage void syscall_trace(struct pt_regs *regs, int entryexit) +asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs) { - struct task_struct *tsk = current; + long long ret = 0; secure_computing(regs->regs[9]); - if (unlikely(current->audit_context) && entryexit) - audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]), - regs->regs[9]); - - if (!test_thread_flag(TIF_SYSCALL_TRACE) && - !test_thread_flag(TIF_SINGLESTEP)) - goto out; - if (!(tsk->ptrace & PT_PTRACED)) - goto out; - - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) && - !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0)); - - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (tsk->exit_code) { - send_sig(tsk->exit_code, tsk, 1); - tsk->exit_code = 0; - } + if (test_thread_flag(TIF_SYSCALL_TRACE) && + tracehook_report_syscall_entry(regs)) + /* + * Tracing decided this syscall should not happen. + * We'll return a bogus call number to get an ENOSYS + * error, but leave the original number in regs->regs[0]. + */ + ret = -1LL; -out: - if (unlikely(current->audit_context) && !entryexit) + if (unlikely(current->audit_context)) audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[1], regs->regs[2], regs->regs[3], regs->regs[4], regs->regs[5]); + + return ret ?: regs->regs[9]; +} + +asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) +{ + if (unlikely(current->audit_context)) + audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]), + regs->regs[9]); + + if (test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, 0); } /* Called with interrupts disabled */ diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index 4bbbde895a53..51689d29ad45 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -507,14 +508,13 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, switch (regs->regs[0]) { case -ERESTART_RESTARTBLOCK: case -ERESTARTNOHAND: + no_system_call_restart: regs->regs[0] = -EINTR; break; case -ERESTARTSYS: - if (!(ka->sa.sa_flags & SA_RESTART)) { - regs->regs[0] = -EINTR; - break; - } + if (!(ka->sa.sa_flags & SA_RESTART)) + goto no_system_call_restart; /* fallthrough */ case -ERESTARTNOINTR: regs->regs[0] = save_r0; @@ -589,12 +589,15 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0) * clear the TIF_RESTORE_SIGMASK flag */ if (test_thread_flag(TIF_RESTORE_SIGMASK)) clear_thread_flag(TIF_RESTORE_SIGMASK); + + tracehook_signal_handler(signr, &info, &ka, regs, + test_thread_flag(TIF_SINGLESTEP)); } return; } - no_signal: +no_signal: /* Did we come from a system call? */ if (regs->tra >= 0) { /* Restart the system call - no handlers present */ @@ -618,9 +621,14 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0) } asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0, - __u32 thread_info_flags) + unsigned long thread_info_flags) { /* deal with pending signal delivery */ - if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) + if (thread_info_flags & _TIF_SIGPENDING) do_signal(regs, save_r0); + + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } } diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c index 552eb810cd85..1d62dfef77f1 100644 --- a/arch/sh/kernel/signal_64.c +++ b/arch/sh/kernel/signal_64.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -42,7 +43,84 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) -asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset); +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + * + * Note that we go through the signals twice: once to check the signals that + * the kernel can handle, and then we build all the user-level signal handling + * stack-frames in one go after that. + */ +static int do_signal(struct pt_regs *regs, sigset_t *oldset) +{ + siginfo_t info; + int signr; + struct k_sigaction ka; + + /* + * We want the common case to go fast, which + * is why we may in certain cases get here from + * kernel mode. Just return without doing anything + * if so. + */ + if (!user_mode(regs)) + return 1; + + if (try_to_freeze()) + goto no_signal; + + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else if (!oldset) + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, 0); + + if (signr > 0) { + /* Whee! Actually deliver the signal. */ + handle_signal(signr, &info, &ka, oldset, regs); + + /* + * If a signal was successfully delivered, the saved sigmask + * is in its frame, and we can clear the TIF_RESTORE_SIGMASK + * flag. + */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + clear_thread_flag(TIF_RESTORE_SIGMASK); + + tracehook_signal_handler(signr, &info, &ka, regs, 0); + return 1; + } + +no_signal: + /* Did we come from a system call? */ + if (regs->syscall_nr >= 0) { + /* Restart the system call - no handlers present */ + switch (regs->regs[REG_RET]) { + case -ERESTARTNOHAND: + case -ERESTARTSYS: + case -ERESTARTNOINTR: + /* Decode Syscall # */ + regs->regs[REG_RET] = regs->syscall_nr; + regs->pc -= 4; + break; + + case -ERESTART_RESTARTBLOCK: + regs->regs[REG_RET] = __NR_restart_syscall; + regs->pc -= 4; + break; + } + } + + /* No signal to deliver -- put the saved sigmask back */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } + + return 0; +} /* * Atomically swap in the new signal mask, and wait for a signal. @@ -643,14 +721,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, switch (regs->regs[REG_RET]) { case -ERESTART_RESTARTBLOCK: case -ERESTARTNOHAND: + no_system_call_restart: regs->regs[REG_RET] = -EINTR; break; case -ERESTARTSYS: - if (!(ka->sa.sa_flags & SA_RESTART)) { - regs->regs[REG_RET] = -EINTR; - break; - } + if (!(ka->sa.sa_flags & SA_RESTART)) + goto no_system_call_restart; /* fallthrough */ case -ERESTARTNOINTR: /* Decode syscall # */ @@ -673,80 +750,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, spin_unlock_irq(¤t->sighand->siglock); } -/* - * Note that 'init' is a special process: it doesn't get signals it doesn't - * want to handle. Thus you cannot kill init even with a SIGKILL even by - * mistake. - * - * Note that we go through the signals twice: once to check the signals that - * the kernel can handle, and then we build all the user-level signal handling - * stack-frames in one go after that. - */ -int do_signal(struct pt_regs *regs, sigset_t *oldset) +asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) { - siginfo_t info; - int signr; - struct k_sigaction ka; - - /* - * We want the common case to go fast, which - * is why we may in certain cases get here from - * kernel mode. Just return without doing anything - * if so. - */ - if (!user_mode(regs)) - return 1; - - if (try_to_freeze()) - goto no_signal; - - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - oldset = ¤t->saved_sigmask; - else if (!oldset) - oldset = ¤t->blocked; - - signr = get_signal_to_deliver(&info, &ka, regs, 0); - - if (signr > 0) { - /* Whee! Actually deliver the signal. */ - handle_signal(signr, &info, &ka, oldset, regs); + if (thread_info_flags & _TIF_SIGPENDING) + do_signal(regs, 0); - /* - * If a signal was successfully delivered, the saved sigmask - * is in its frame, and we can clear the TIF_RESTORE_SIGMASK - * flag. - */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - clear_thread_flag(TIF_RESTORE_SIGMASK); - - return 1; + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); } - -no_signal: - /* Did we come from a system call? */ - if (regs->syscall_nr >= 0) { - /* Restart the system call - no handlers present */ - switch (regs->regs[REG_RET]) { - case -ERESTARTNOHAND: - case -ERESTARTSYS: - case -ERESTARTNOINTR: - /* Decode Syscall # */ - regs->regs[REG_RET] = regs->syscall_nr; - regs->pc -= 4; - break; - - case -ERESTART_RESTARTBLOCK: - regs->regs[REG_RET] = __NR_restart_syscall; - regs->pc -= 4; - break; - } - } - - /* No signal to deliver -- put the saved sigmask back */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) { - clear_thread_flag(TIF_RESTORE_SIGMASK); - sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); - } - - return 0; } -- cgit v1.2.3 From 9e5e21170e4de269cd5b9d53ac9d60d220e3be63 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 20:05:35 +0900 Subject: sh: Fix up the audit arch endian specification. Presently this was always being set to AUDIT_ARCH_SH, which assumes big endian. Fix this up so that the architecture actually reflects what we're running on. Signed-off-by: Paul Mundt --- arch/sh/kernel/ptrace_32.c | 13 ++++++++++++- arch/sh/kernel/ptrace_64.c | 16 +++++++++++++++- 2 files changed, 27 insertions(+), 2 deletions(-) diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index f48769b23bd6..035cb300d3dc 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -217,6 +217,17 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return ret; } +static inline int audit_arch(void) +{ + int arch = EM_SH; + +#ifdef CONFIG_CPU_LITTLE_ENDIAN + arch |= __AUDIT_ARCH_LE; +#endif + + return arch; +} + asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) { long ret = 0; @@ -233,7 +244,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) ret = -1L; if (unlikely(current->audit_context)) - audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[3], + audit_syscall_entry(audit_arch(), regs->regs[3], regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]); diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index 236d8bef9ccd..5922edd416db 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -222,6 +222,20 @@ asmlinkage int sh64_ptrace(long request, long pid, long addr, long data) return sys_ptrace(request, pid, addr, data); } +static inline int audit_arch(void) +{ + int arch = EM_SH; + +#ifdef CONFIG_64BIT + arch |= __AUDIT_ARCH_64BIT; +#endif +#ifdef CONFIG_CPU_LITTLE_ENDIAN + arch |= __AUDIT_ARCH_LE; +#endif + + return arch; +} + asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs) { long long ret = 0; @@ -238,7 +252,7 @@ asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs) ret = -1LL; if (unlikely(current->audit_context)) - audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[1], + audit_syscall_entry(audit_arch(), regs->regs[1], regs->regs[2], regs->regs[3], regs->regs[4], regs->regs[5]); -- cgit v1.2.3 From 26a8ef5326e390d89290822fb1f4fcf16845fd84 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 31 Jul 2008 16:24:19 +0900 Subject: net: stnic: Fix up fallout from SH header migration. asm/se.h moved to mach-se/mach/se.h, update the path. We could use mach/se.h here also, but it's preferable to be explicit when there's only a single supported mach-type. Signed-off-by: Paul Mundt --- drivers/net/stnic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/stnic.c b/drivers/net/stnic.c index b65be5d70fec..2ed0bd596815 100644 --- a/drivers/net/stnic.c +++ b/drivers/net/stnic.c @@ -19,7 +19,7 @@ #include #include -#include +#include #include #ifdef CONFIG_SH_STANDARD_BIOS #include -- cgit v1.2.3 From 61a2d07d3fb1ac34d142b9b62d4cd60a0f8c229e Mon Sep 17 00:00:00 2001 From: Niels de Vos Date: Thu, 31 Jul 2008 00:07:23 -0700 Subject: Remove newline from the description of module parameters Some module parameters with only one line have the '\n' at the end of the description. This is not needed nor wanted as after the description the type (i.e. int) is followed by a newline. Some modules contain a multi-line description, these are not affected by this patch. Signed-off-by: Niels de Vos Acked-by: Randy Dunlap Cc: John W. Linville Cc: Ed L. Cashin Cc: Dave Airlie Cc: Roland Dreier Acked-by: Mauro Carvalho Chehab Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/asus_acpi.c | 4 ++-- drivers/block/aoe/aoenet.c | 2 +- drivers/gpu/drm/radeon/radeon_drv.c | 2 +- drivers/infiniband/hw/ipath/ipath_iba7220.c | 2 +- drivers/media/video/cs5345.c | 2 +- drivers/media/video/cs53l32a.c | 2 +- drivers/media/video/mt9v022.c | 2 +- drivers/net/netconsole.c | 2 +- drivers/net/tokenring/3c359.c | 8 ++++---- drivers/net/wireless/ipw2200.c | 2 +- drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +- drivers/video/matrox/matroxfb_base.c | 2 +- 12 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c index 44ad90c03c2e..d3d0886d637f 100644 --- a/drivers/acpi/asus_acpi.c +++ b/drivers/acpi/asus_acpi.c @@ -78,9 +78,9 @@ MODULE_LICENSE("GPL"); static uid_t asus_uid; static gid_t asus_gid; module_param(asus_uid, uint, 0); -MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus.\n"); +MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus"); module_param(asus_gid, uint, 0); -MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus.\n"); +MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus"); /* For each model, all features implemented, * those marked with R are relative to HOTK, A for absolute */ diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c index d625169c8e48..0c81ca731287 100644 --- a/drivers/block/aoe/aoenet.c +++ b/drivers/block/aoe/aoenet.c @@ -30,7 +30,7 @@ enum { static char aoe_iflist[IFLISTSZ]; module_param_string(aoe_iflist, aoe_iflist, IFLISTSZ, 0600); -MODULE_PARM_DESC(aoe_iflist, "aoe_iflist=\"dev1 [dev2 ...]\"\n"); +MODULE_PARM_DESC(aoe_iflist, "aoe_iflist=\"dev1 [dev2 ...]\""); #ifndef MODULE static int __init aoe_iflist_setup(char *str) diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 349ac3d3b848..637bd7faf132 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -38,7 +38,7 @@ int radeon_no_wb; -MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers\n"); +MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers"); module_param_named(no_wb, radeon_no_wb, int, 0444); static int dri_library_name(struct drm_device *dev, char *buf) diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c index fb70712ac85c..fadbfbf55a6a 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba7220.c +++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c @@ -528,7 +528,7 @@ static const struct ipath_cregs ipath_7220_cregs = { static char int_type[16] = "auto"; module_param_string(interrupt_type, int_type, sizeof(int_type), 0444); -MODULE_PARM_DESC(int_type, " interrupt_type=auto|force_msi|force_intx\n"); +MODULE_PARM_DESC(int_type, " interrupt_type=auto|force_msi|force_intx"); /* packet rate matching delay; chip has support */ static u8 rate_to_delay[2][2] = { diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c index 61d14d26686f..a662b15d5b90 100644 --- a/drivers/media/video/cs5345.c +++ b/drivers/media/video/cs5345.c @@ -35,7 +35,7 @@ static int debug; module_param(debug, bool, 0644); -MODULE_PARM_DESC(debug, "Debugging messages\n\t\t\t0=Off (default), 1=On"); +MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On"); /* ----------------------------------------------------------------------- */ diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c index e30a589c0e18..c4444500b330 100644 --- a/drivers/media/video/cs53l32a.c +++ b/drivers/media/video/cs53l32a.c @@ -39,7 +39,7 @@ static int debug; module_param(debug, bool, 0644); -MODULE_PARM_DESC(debug, "Debugging messages\n\t\t\t0=Off (default), 1=On"); +MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On"); static unsigned short normal_i2c[] = { 0x22 >> 1, I2C_CLIENT_END }; diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c index b31ba4e09327..56808cd2f8a9 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/video/mt9v022.c @@ -25,7 +25,7 @@ static char *sensor_type; module_param(sensor_type, charp, S_IRUGO); -MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"\n"); +MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\""); /* mt9v022 selected register addresses */ #define MT9V022_CHIP_VERSION 0x00 diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index e13966bb5f77..9681618c3232 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -53,7 +53,7 @@ MODULE_LICENSE("GPL"); static char config[MAX_PARAM_LENGTH]; module_param_string(netconsole, config, MAX_PARAM_LENGTH, 0); -MODULE_PARM_DESC(netconsole, " netconsole=[src-port]@[src-ip]/[dev],[tgt-port]@/[tgt-macaddr]\n"); +MODULE_PARM_DESC(netconsole, " netconsole=[src-port]@[src-ip]/[dev],[tgt-port]@/[tgt-macaddr]"); #ifndef MODULE static int __init option_setup(char *opt) diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c index 7766cde0d63d..bf621328b601 100644 --- a/drivers/net/tokenring/3c359.c +++ b/drivers/net/tokenring/3c359.c @@ -95,20 +95,20 @@ MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ; static int ringspeed[XL_MAX_ADAPTERS] = {0,} ; module_param_array(ringspeed, int, NULL, 0); -MODULE_PARM_DESC(ringspeed,"3c359: Ringspeed selection - 4,16 or 0") ; +MODULE_PARM_DESC(ringspeed,"3c359: Ringspeed selection - 4,16 or 0") ; /* Packet buffer size */ static int pkt_buf_sz[XL_MAX_ADAPTERS] = {0,} ; module_param_array(pkt_buf_sz, int, NULL, 0) ; -MODULE_PARM_DESC(pkt_buf_sz,"3c359: Initial buffer size") ; +MODULE_PARM_DESC(pkt_buf_sz,"3c359: Initial buffer size") ; /* Message Level */ -static int message_level[XL_MAX_ADAPTERS] = {0,} ; +static int message_level[XL_MAX_ADAPTERS] = {0,} ; module_param_array(message_level, int, NULL, 0) ; -MODULE_PARM_DESC(message_level, "3c359: Level of reported messages \n") ; +MODULE_PARM_DESC(message_level, "3c359: Level of reported messages") ; /* * This is a real nasty way of doing this, but otherwise you * will be stuck with 1555 lines of hex #'s in the code. diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 1acfbcd3703c..846a7d051851 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -11946,7 +11946,7 @@ module_param(auto_create, int, 0444); MODULE_PARM_DESC(auto_create, "auto create adhoc network (default on)"); module_param(led, int, 0444); -MODULE_PARM_DESC(led, "enable led control on some systems (default 0 off)\n"); +MODULE_PARM_DESC(led, "enable led control on some systems (default 0 off)"); module_param(debug, int, 0444); MODULE_PARM_DESC(debug, "debug output mask"); diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 9afecb813716..ba2df1ba32d2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2469,7 +2469,7 @@ MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])"); module_param_named(disable, iwl4965_mod_params.disable, int, 0444); MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])"); module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444); -MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])\n"); +MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); module_param_named(debug, iwl4965_mod_params.debug, int, 0444); MODULE_PARM_DESC(debug, "debug output mask"); module_param_named( diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c index 54e82f35353d..c02136202792 100644 --- a/drivers/video/matrox/matroxfb_base.c +++ b/drivers/video/matrox/matroxfb_base.c @@ -2536,7 +2536,7 @@ module_param(fh, int, 0); MODULE_PARM_DESC(fh, "Startup horizontal frequency, 0-999kHz, 1000-INF Hz"); module_param(fv, int, 0); MODULE_PARM_DESC(fv, "Startup vertical frequency, 0-INF Hz\n" -"You should specify \"fv:max_monitor_vsync,fh:max_monitor_hsync,maxclk:max_monitor_dotclock\"\n"); +"You should specify \"fv:max_monitor_vsync,fh:max_monitor_hsync,maxclk:max_monitor_dotclock\""); module_param(grayscale, int, 0); MODULE_PARM_DESC(grayscale, "Sets display into grayscale. Works perfectly with paletized videomode (4, 8bpp), some limitations apply to 16, 24 and 32bpp videomodes (default=nograyscale)"); module_param(cross4MB, int, 0); -- cgit v1.2.3 From ea44c1d60df3640bd956a67c392865c44fe9bc45 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 31 Jul 2008 00:07:27 -0700 Subject: PNP: fix formatting of dbg_pnp_show_resources() output Each resource should be printed on its own line, so start snprintf'ing at the beginning of the buffer every time through the loop. Also, use scnprintf() rather than snprintf() when building up the buffer to print. scnprintf() returns the number of characters actually written into the buffer (not including the trailing NULL). snprintf() returns the number of characters that *would be* written, assuming everything would fit in the buffer. That's nice if we want to resize the buffer to make sure everything fits, but in this case, I just want to keep from overflowing the buffer, and it's OK if the output is truncated. Using snprintf() meant that my "len" could grow to be more than the the buffer size, which makes "sizeof(buf) - len" negative, which causes this alarming WARN_ON: http://marc.info/?l=linux-kernel&m=121736480005656&w=2 More useful snprintf/scnprintf discussion: http://lwn.net/Articles/69419/ Signed-off-by: Bjorn Helgaas Reported-by: Pete Clements Cc: Rene Herman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pnp/support.c | 96 ++++++++++++++++++++++++++------------------------- 1 file changed, 49 insertions(+), 47 deletions(-) diff --git a/drivers/pnp/support.c b/drivers/pnp/support.c index bbf78ef4ba02..b42df1620718 100644 --- a/drivers/pnp/support.c +++ b/drivers/pnp/support.c @@ -77,7 +77,7 @@ void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc) { #ifdef DEBUG char buf[128]; - int len = 0; + int len; struct pnp_resource *pnp_res; struct resource *res; @@ -89,9 +89,10 @@ void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc) dev_dbg(&dev->dev, "%s: current resources:\n", desc); list_for_each_entry(pnp_res, &dev->resources, list) { res = &pnp_res->res; + len = 0; - len += snprintf(buf + len, sizeof(buf) - len, " %-3s ", - pnp_resource_type_name(res)); + len += scnprintf(buf + len, sizeof(buf) - len, " %-3s ", + pnp_resource_type_name(res)); if (res->flags & IORESOURCE_DISABLED) { dev_dbg(&dev->dev, "%sdisabled\n", buf); @@ -101,18 +102,18 @@ void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc) switch (pnp_resource_type(res)) { case IORESOURCE_IO: case IORESOURCE_MEM: - len += snprintf(buf + len, sizeof(buf) - len, - "%#llx-%#llx flags %#lx", - (unsigned long long) res->start, - (unsigned long long) res->end, - res->flags); + len += scnprintf(buf + len, sizeof(buf) - len, + "%#llx-%#llx flags %#lx", + (unsigned long long) res->start, + (unsigned long long) res->end, + res->flags); break; case IORESOURCE_IRQ: case IORESOURCE_DMA: - len += snprintf(buf + len, sizeof(buf) - len, - "%lld flags %#lx", - (unsigned long long) res->start, - res->flags); + len += scnprintf(buf + len, sizeof(buf) - len, + "%lld flags %#lx", + (unsigned long long) res->start, + res->flags); break; } dev_dbg(&dev->dev, "%s\n", buf); @@ -144,66 +145,67 @@ void dbg_pnp_show_option(struct pnp_dev *dev, struct pnp_option *option) struct pnp_dma *dma; if (pnp_option_is_dependent(option)) - len += snprintf(buf + len, sizeof(buf) - len, - " dependent set %d (%s) ", - pnp_option_set(option), - pnp_option_priority_name(option)); + len += scnprintf(buf + len, sizeof(buf) - len, + " dependent set %d (%s) ", + pnp_option_set(option), + pnp_option_priority_name(option)); else - len += snprintf(buf + len, sizeof(buf) - len, " independent "); + len += scnprintf(buf + len, sizeof(buf) - len, + " independent "); switch (option->type) { case IORESOURCE_IO: port = &option->u.port; - len += snprintf(buf + len, sizeof(buf) - len, "io min %#llx " - "max %#llx align %lld size %lld flags %#x", - (unsigned long long) port->min, - (unsigned long long) port->max, - (unsigned long long) port->align, - (unsigned long long) port->size, port->flags); + len += scnprintf(buf + len, sizeof(buf) - len, "io min %#llx " + "max %#llx align %lld size %lld flags %#x", + (unsigned long long) port->min, + (unsigned long long) port->max, + (unsigned long long) port->align, + (unsigned long long) port->size, port->flags); break; case IORESOURCE_MEM: mem = &option->u.mem; - len += snprintf(buf + len, sizeof(buf) - len, "mem min %#llx " - "max %#llx align %lld size %lld flags %#x", - (unsigned long long) mem->min, - (unsigned long long) mem->max, - (unsigned long long) mem->align, - (unsigned long long) mem->size, mem->flags); + len += scnprintf(buf + len, sizeof(buf) - len, "mem min %#llx " + "max %#llx align %lld size %lld flags %#x", + (unsigned long long) mem->min, + (unsigned long long) mem->max, + (unsigned long long) mem->align, + (unsigned long long) mem->size, mem->flags); break; case IORESOURCE_IRQ: irq = &option->u.irq; - len += snprintf(buf + len, sizeof(buf) - len, "irq"); + len += scnprintf(buf + len, sizeof(buf) - len, "irq"); if (bitmap_empty(irq->map.bits, PNP_IRQ_NR)) - len += snprintf(buf + len, sizeof(buf) - len, - " "); + len += scnprintf(buf + len, sizeof(buf) - len, + " "); else { for (i = 0; i < PNP_IRQ_NR; i++) if (test_bit(i, irq->map.bits)) - len += snprintf(buf + len, - sizeof(buf) - len, - " %d", i); + len += scnprintf(buf + len, + sizeof(buf) - len, + " %d", i); } - len += snprintf(buf + len, sizeof(buf) - len, " flags %#x", - irq->flags); + len += scnprintf(buf + len, sizeof(buf) - len, " flags %#x", + irq->flags); if (irq->flags & IORESOURCE_IRQ_OPTIONAL) - len += snprintf(buf + len, sizeof(buf) - len, - " (optional)"); + len += scnprintf(buf + len, sizeof(buf) - len, + " (optional)"); break; case IORESOURCE_DMA: dma = &option->u.dma; - len += snprintf(buf + len, sizeof(buf) - len, "dma"); + len += scnprintf(buf + len, sizeof(buf) - len, "dma"); if (!dma->map) - len += snprintf(buf + len, sizeof(buf) - len, - " "); + len += scnprintf(buf + len, sizeof(buf) - len, + " "); else { for (i = 0; i < 8; i++) if (dma->map & (1 << i)) - len += snprintf(buf + len, - sizeof(buf) - len, - " %d", i); + len += scnprintf(buf + len, + sizeof(buf) - len, + " %d", i); } - len += snprintf(buf + len, sizeof(buf) - len, " (bitmask %#x) " - "flags %#x", dma->map, dma->flags); + len += scnprintf(buf + len, sizeof(buf) - len, " (bitmask %#x) " + "flags %#x", dma->map, dma->flags); break; } dev_dbg(&dev->dev, "%s\n", buf); -- cgit v1.2.3 From c6de002617c199f80f9a2a713dffc263bdc69b81 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Thu, 31 Jul 2008 00:07:29 -0700 Subject: Missing symbol prefix on vmlinux.lds.h ARCH=h8300: init/main.c:781: undefined reference to `___early_initcall_end' Same problem have __start___bug_table __stop___bug_table __tracedata_start __tracedata_end __per_cpu_start __per_cpu_end When defining a symbol in vmlinux.lds, use the VMLINUX_SYMBOL macro. VMLINUX_SYMBOL adds a prefix charactor. You can't just use straight symbol names in common header files as they dont take into consideration weird arch-specific ABI conventions. in the case of Blackfin/h8300, the ABI dictates that any C-visible symbols have an underscore prefixed to them. Thus all symbols in vmlinux.lds.h need to be wrapped in VMLINUX_SYMBOL() so that each arch can put hide this magic in their own files. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Yoshinori Sato Cc: Jeremy Fitzhardinge Cc: "Mike Frysinger" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/vmlinux.lds.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 6d88a923c945..cb752ba72466 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -333,9 +333,9 @@ #define BUG_TABLE \ . = ALIGN(8); \ __bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \ - __start___bug_table = .; \ + VMLINUX_SYMBOL(__start___bug_table) = .; \ *(__bug_table) \ - __stop___bug_table = .; \ + VMLINUX_SYMBOL(__stop___bug_table) = .; \ } #else #define BUG_TABLE @@ -345,9 +345,9 @@ #define TRACEDATA \ . = ALIGN(4); \ .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \ - __tracedata_start = .; \ + VMLINUX_SYMBOL(__tracedata_start) = .; \ *(.tracedata) \ - __tracedata_end = .; \ + VMLINUX_SYMBOL(__tracedata_end) = .; \ } #else #define TRACEDATA @@ -362,7 +362,7 @@ #define INITCALLS \ *(.initcallearly.init) \ - __early_initcall_end = .; \ + VMLINUX_SYMBOL(__early_initcall_end) = .; \ *(.initcall0.init) \ *(.initcall0s.init) \ *(.initcall1.init) \ @@ -383,9 +383,9 @@ #define PERCPU(align) \ . = ALIGN(align); \ - __per_cpu_start = .; \ + VMLINUX_SYMBOL(__per_cpu_start) = .; \ .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { \ *(.data.percpu) \ *(.data.percpu.shared_aligned) \ } \ - __per_cpu_end = .; + VMLINUX_SYMBOL(__per_cpu_end) = .; -- cgit v1.2.3 From 0ef89d25d3e390dfa7c46772907951744a4067dc Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 31 Jul 2008 00:07:30 -0700 Subject: mm/hugetlb: don't crash when HPAGE_SHIFT is 0 Some platform decide whether they support huge pages at boot time. On these, such as powerpc, HPAGE_SHIFT is a variable, not a constant, and is set to 0 when there is no such support. The patches to introduce multiple huge pages support broke that causing the kernel to crash at boot time on machines such as POWER3 which lack support for multiple page sizes. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index d237a02eb228..28a2980ee435 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1283,7 +1283,12 @@ module_exit(hugetlb_exit); static int __init hugetlb_init(void) { - BUILD_BUG_ON(HPAGE_SHIFT == 0); + /* Some platform decide whether they support huge pages at boot + * time. On these, such as powerpc, HPAGE_SHIFT is set to 0 when + * there is no such support + */ + if (HPAGE_SHIFT == 0) + return 0; if (!size_to_hstate(default_hstate_size)) { default_hstate_size = HPAGE_SIZE; -- cgit v1.2.3 From 3ab36ab68531ad90648fdeedcaf437f121572ede Mon Sep 17 00:00:00 2001 From: Eugeniy Meshcheryakov Date: Thu, 31 Jul 2008 10:03:19 +0100 Subject: try harder to load tty ldisc driver Currently function tty_ldisc_get() tries to load an ldisc driver module only when tty_ldisc_try_get() returns -EAGAIN. This happens only if module is being unloaded. If ldisc module is not loaded tty_ldisc_try_get() returns -EINVAL and this case is not handled in tty_ldisc_get(), so request_module() is not called. Attached patch fixes this by calling request_module() if tty_ldisc_try_get() returned any error code. I discovered this when my UMTS modem stopped working with 2.6.27-rc1 because module ppp_async was not loaded. Signed-off-by: Eugeniy Meshcheryakov Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_ldisc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index 241cbdea65ab..f307f135cbfb 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -169,7 +169,7 @@ static int tty_ldisc_get(int disc, struct tty_ldisc *ld) if (disc < N_TTY || disc >= NR_LDISCS) return -EINVAL; err = tty_ldisc_try_get(disc, ld); - if (err == -EAGAIN) { + if (err < 0) { request_module("tty-ldisc-%d", disc); err = tty_ldisc_try_get(disc, ld); } -- cgit v1.2.3 From 02c363808981b67e631fe71cc7e952497f761bef Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 31 Jul 2008 13:01:30 +0100 Subject: MN10300: Wire up new system calls Wire up system calls added in the last merge window for the MN10300 arch. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/entry.S | 6 ++++++ include/asm-mn10300/unistd.h | 6 ++++++ 2 files changed, 12 insertions(+) diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 11de3606eee6..b7cbb1487af4 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -716,6 +716,12 @@ ENTRY(sys_call_table) .long sys_fallocate /* 325 */ .long sys_timerfd_settime .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 /* 330 */ + .long sys_dup3 + .long sys_pipe2 + .long sys_inotify_init1 nr_syscalls=(.-sys_call_table)/4 diff --git a/include/asm-mn10300/unistd.h b/include/asm-mn10300/unistd.h index 3721aa9e195d..543a4f98695d 100644 --- a/include/asm-mn10300/unistd.h +++ b/include/asm-mn10300/unistd.h @@ -338,6 +338,12 @@ #define __NR_fallocate 325 #define __NR_timerfd_settime 326 #define __NR_timerfd_gettime 327 +#define __NR_signalfd4 328 +#define __NR_eventfd2 329 +#define __NR_epoll_create1 330 +#define __NR_dup3 331 +#define __NR_pipe2 332 +#define __NR_inotify_init1 333 #ifdef __KERNEL__ -- cgit v1.2.3 From 784dd7b64ca661722f539db906d56ce54906f2fb Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 31 Jul 2008 13:46:33 +0100 Subject: FRV: Wire up new system calls Wire up for FRV the system calls that were added in the last merge window. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/frv/kernel/entry.S | 7 ++++++- include/asm-frv/unistd.h | 8 +++++++- 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index b8a4b94779b1..99060ab507ee 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1519,6 +1519,11 @@ sys_call_table: .long sys_fallocate .long sys_timerfd_settime /* 325 */ .long sys_timerfd_gettime - + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 /* 330 */ + .long sys_pipe2 + .long sys_inotify_init1 syscall_table_size = (. - sys_call_table) diff --git a/include/asm-frv/unistd.h b/include/asm-frv/unistd.h index f184eb8c047c..edcfaf5f0414 100644 --- a/include/asm-frv/unistd.h +++ b/include/asm-frv/unistd.h @@ -333,10 +333,16 @@ #define __NR_fallocate 324 #define __NR_timerfd_settime 325 #define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 #ifdef __KERNEL__ -#define NR_syscalls 325 +#define NR_syscalls 333 #define __ARCH_WANT_IPC_PARSE_VERSION /* #define __ARCH_WANT_OLD_READDIR */ -- cgit v1.2.3 From a97762a77f927577525868e39661084170ce3605 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 31 Jul 2008 12:40:52 -0400 Subject: dual license ftrace.txt I asked legal about the licensing of ftrace.txt, and they told me that, unless the Documentation directory is specifically set up to handle non GPL licenses (which it does not appear to be), then it would be best to put ftrace.txt under the GPL. This patch adds a dual license to ftrace.txt such that it is under both the FDL and the GPL. Signed-off-by: Steven Rostedt Signed-off-by: Linus Torvalds --- Documentation/ftrace.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index f218f616ff6b..d330fe3103da 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -4,6 +4,7 @@ Copyright 2008 Red Hat Inc. Author: Steven Rostedt License: The GNU Free Documentation License, Version 1.2 + (dual licensed under the GPL v2) Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton, John Kacur, and David Teigland. -- cgit v1.2.3 From 3669bc143fb3d389918379547f4a6b28a757b7fe Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Fri, 1 Aug 2008 15:08:15 -0500 Subject: Remove EXPORTS of follow_page & zap_page_range Delete 2 EXPORTs that were accidentally sent upstream. Signed-off-by: Jack Steiner Signed-off-by: Linus Torvalds --- mm/memory.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/mm/memory.c b/mm/memory.c index 0e4eea10c7b0..6793b9c68107 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -993,7 +993,6 @@ unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address, tlb_finish_mmu(tlb, address, end); return end; } -EXPORT_SYMBOL_GPL(zap_page_range); /** * zap_vma_ptes - remove ptes mapping the vma @@ -1111,7 +1110,6 @@ no_page_table: } return page; } -EXPORT_SYMBOL_GPL(follow_page); /* Can we do the FOLL_ANON optimization? */ static inline int use_zero_page(struct vm_area_struct *vma) -- cgit v1.2.3 From 4744b43431e8613f920c5cba88346756f53c5165 Mon Sep 17 00:00:00 2001 From: Tim Bird Date: Fri, 1 Aug 2008 14:05:50 -0700 Subject: embedded: fix vc_translate operator precedence This fixes a bug in operator precedence in the newly introduced vc_translate macro. Without this fix, the translation of some characters on the kernel console is garbled. This patch was copied to the e-mail list previously for testing. Now, all reports confirm that it works, so this is an official post for application. Signed-off-by: Tim Bird Signed-off-by: David Woodhouse --- include/linux/vt_kern.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index 14c0e91be9b5..8c8119ffee12 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -74,7 +74,7 @@ void con_protect_unimap(struct vc_data *vc, int rdonly); int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc); #define vc_translate(vc, c) ((vc)->vc_translate[(c) | \ - (vc)->vc_toggle_meta ? 0x80 : 0]) + ((vc)->vc_toggle_meta ? 0x80 : 0)]) #else #define con_set_trans_old(arg) (0) #define con_get_trans_old(arg) (-EINVAL) -- cgit v1.2.3 From 4385e12b291a6816987cb88a74fc116f520180f8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 2 Aug 2008 07:14:09 +0900 Subject: sh: Revert the location change of auto-generated asm/machtypes.h This ended up causing build breakage on O= builds, as reported by Adrian: <-- snip --> ... CC init/main.o In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/irq.h:4, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/irq.h:23, from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/hardirq.h:5, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/hardirq.h:7, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/asm-generic/local.h:5, from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/local.h:4, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/module.h:19, from /home/bunk/linux/kernel-2.6/git/linux-2.6/init/main.c:13: /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/machvec.h:15:27: error: asm/machtypes.h: No such file or directory make[2]: *** [init/main.o] Error 1 <-- snip --> So we simply move machtypes.h back to its original place. asm-offsets.h is still generated there regardless, until such a time that we find a better place to stash auto-generated files. Reported-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/Makefile | 4 ++-- arch/sh/tools/Makefile | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 25659ce74baa..7b70cfd2516a 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -164,7 +164,7 @@ KBUILD_AFLAGS += $(cflags-y) PHONY += maketools FORCE maketools: include/linux/version.h FORCE - $(Q)$(MAKE) $(build)=arch/sh/tools arch/sh/include/asm/machtypes.h + $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h all: $(KBUILD_IMAGE) @@ -215,4 +215,4 @@ arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S $(call filechk,gen-syscalltab) CLEAN_FILES += arch/sh/lib64/syscalltab.h \ - arch/sh/include/asm/machtypes.h + include/asm-sh/machtypes.h diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile index b5d202be8206..567516b58acc 100644 --- a/arch/sh/tools/Makefile +++ b/arch/sh/tools/Makefile @@ -10,7 +10,7 @@ # Shamelessly cloned from ARM. # -arch/sh/include/asm/machtypes.h: $(src)/gen-mach-types $(src)/mach-types +include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types @echo ' Generating $@' - $(Q)if [ ! -d arch/sh/include/asm ]; then mkdir -p arch/sh/include/asm; fi + $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } -- cgit v1.2.3 From 49de935c107a53b0eba336efceb1dc3a8be64f87 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sat, 2 Aug 2008 01:13:44 +0300 Subject: sh: fix LIBGCC Commit f15cbe6f1a4b4d9df59142fc8e4abb973302cf44 (sh: migrate to arch/sh/include/) moved KBUILD_CFLAGS (which is used by LIBGCC) below LIBGCC, causing build errors like the following: <-- snip --> ... LD .tmp_vmlinux1 arch/sh/kernel/built-in.o: In function `module_clk_recalc': clock-sh4.c:(.text+0x80f0): undefined reference to `__udivsi3_i4i' ... make[1]: *** [.tmp_vmlinux1] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/Makefile | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 7b70cfd2516a..01d85c74481d 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -95,8 +95,6 @@ head-y := arch/sh/kernel/init_task.o head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o head-$(CONFIG_SUPERH64) += arch/sh/kernel/head_64.o -LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) - core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ @@ -145,10 +143,6 @@ cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4 cpuincdir-$(CONFIG_CPU_SH5) += cpu-sh5 cpuincdir-y += cpu-common # Must be last -libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) -libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) -libs-y += $(LIBGCC) - drivers-y += arch/sh/drivers/ drivers-$(CONFIG_OPROFILE) += arch/sh/oprofile/ @@ -161,6 +155,12 @@ KBUILD_CFLAGS += -pipe $(cflags-y) KBUILD_CPPFLAGS += $(cflags-y) KBUILD_AFLAGS += $(cflags-y) +LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) + +libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) +libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) +libs-y += $(LIBGCC) + PHONY += maketools FORCE maketools: include/linux/version.h FORCE -- cgit v1.2.3 From 759da9267177e5005c8f21e11d29d26f4f459744 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 1 Aug 2008 23:58:36 +0100 Subject: firmware: silence __fw_modbuild and __fw_modinst 'Nothing to be done' messages People don't like them and think they're errors. Leave the __fw_install one though; when 'make firmware_install' does nothing, it's best to have a 'Nothing to be done for...' message rather than just doing nothing. Signed-off-by: David Woodhouse --- scripts/Makefile.fwinst | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst index f63a663de158..6bf8e87f1dcf 100644 --- a/scripts/Makefile.fwinst +++ b/scripts/Makefile.fwinst @@ -50,8 +50,12 @@ PHONY += __fw_install __fw_modinst FORCE .PHONY: $(PHONY) __fw_install: $(installed-fw) + __fw_modinst: $(installed-mod-fw) + @: + __fw_modbuild: $(addprefix $(obj)/,$(mod-fw)) + @: FORCE: -- cgit v1.2.3 From f1136d022af8f07a97f59c6d07483bdb82ffbd8e Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 2 Aug 2008 00:01:21 +0100 Subject: [MTD] Fix !CONFIG_BLOCK compile for mtdsuper.c As reported by Adrian Bunk, commit d5686b444ff3f72808d2b3fbd58672a86cdf38e7 (switch mtd and dm-table to lookup_bdev()) causes the following compile error with CONFIG_BLOCK=n: CC drivers/mtd/mtdsuper.o drivers/mtd/mtdsuper.c: In function `get_sb_mtd': drivers/mtd/mtdsuper.c:184: error: implicit declaration of function 'lookup_bdev' drivers/mtd/mtdsuper.c:184: warning: assignment makes pointer from integer without a cast drivers/mtd/mtdsuper.c:197: error: implicit declaration of function 'bdput' make[3]: *** [drivers/mtd/mtdsuper.o] Error 1 Fix it by putting the block device lookup inside #ifdef CONFIG_BLOCK Signed-off-by: David Woodhouse --- drivers/mtd/mtdsuper.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c index 9b6af7e74a65..00d46e137b2a 100644 --- a/drivers/mtd/mtdsuper.c +++ b/drivers/mtd/mtdsuper.c @@ -125,8 +125,11 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags, int (*fill_super)(struct super_block *, void *, int), struct vfsmount *mnt) { +#ifdef CONFIG_BLOCK struct block_device *bdev; - int mtdnr, ret; + int ret, major; +#endif + int mtdnr; if (!dev_name) return -EINVAL; @@ -178,6 +181,7 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags, } } +#ifdef CONFIG_BLOCK /* try the old way - the hack where we allowed users to mount * /dev/mtdblock$(n) but didn't actually _use_ the blockdev */ @@ -190,22 +194,25 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags, DEBUG(1, "MTDSB: lookup_bdev() returned 0\n"); ret = -EINVAL; - if (MAJOR(bdev->bd_dev) != MTD_BLOCK_MAJOR) - goto not_an_MTD_device; + major = MAJOR(bdev->bd_dev); mtdnr = MINOR(bdev->bd_dev); bdput(bdev); + if (major != MTD_BLOCK_MAJOR) + goto not_an_MTD_device; + return get_sb_mtd_nr(fs_type, flags, dev_name, data, mtdnr, fill_super, mnt); not_an_MTD_device: +#endif /* CONFIG_BLOCK */ + if (!(flags & MS_SILENT)) printk(KERN_NOTICE "MTD: Attempt to mount non-MTD device \"%s\"\n", dev_name); - bdput(bdev); - return ret; + return -EINVAL; } EXPORT_SYMBOL_GPL(get_sb_mtd); -- cgit v1.2.3 From 82f97b8d3cb3982ec97e081598c671fab2c321b0 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 2 Aug 2008 01:31:09 -0700 Subject: rt2x00: Fix compile warning rt2x00usb_vendor_request_large_buff is write-only, so it is safe to make the argument a const. Fixes compile warning: drivers/net/wireless/rt2x00/rt73usb.c: In function 'rt73usb_load_firmware': drivers/net/wireless/rt2x00/rt73usb.c:916: warning: passing argument 5 of 'rt2x00usb_vendor_request_large_buff' discards qualifiers from pointer target typ Signed-off-by: Ivo van Doorn Signed-off-by: David S. Miller --- drivers/net/wireless/rt2x00/rt2x00usb.c | 4 ++-- drivers/net/wireless/rt2x00/rt2x00usb.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 933e6cc9359d..8d76bb2e0312 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -124,7 +124,7 @@ EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, const u8 request, const u8 requesttype, - const u16 offset, void *buffer, + const u16 offset, const void *buffer, const u16 buffer_length, const int timeout) { @@ -134,7 +134,7 @@ int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, mutex_lock(&rt2x00dev->usb_cache_mutex); - tb = buffer; + tb = (char *)buffer; off = offset; len = buffer_length; while (len && !status) { diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index ee3875f894aa..3b4a67417f95 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -185,7 +185,7 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, */ int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, const u8 request, const u8 requesttype, - const u16 offset, void *buffer, + const u16 offset, const void *buffer, const u16 buffer_length, const int timeout); -- cgit v1.2.3 From ff4db0a043a5dee7180bdffd178e61cd02812c68 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 2 Aug 2008 15:21:31 +0100 Subject: [ARM] Remove explicit dependency for misc.o from compressed/Makefile Signed-off-by: Russell King --- arch/arm/boot/compressed/Makefile | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 95baac4939e0..94462a097f86 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -112,6 +112,3 @@ $(obj)/font.c: $(FONTC) $(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config @sed "$(SEDFLAGS)" < $< > $@ - -$(obj)/misc.o: $(obj)/misc.c include/asm/arch/uncompress.h lib/inflate.c - -- cgit v1.2.3 From 780aefed1e179b23dcfbd6cfcb627ec3bd0a164c Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Tue, 29 Jul 2008 18:47:22 +0200 Subject: mISDN fix main ISDN Makefile Compile hardware directory independent from selecting CAPI support. Signed-off-by: Karsten Keil --- drivers/isdn/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/isdn/Makefile b/drivers/isdn/Makefile index 8380a4568d11..f1f777570e8e 100644 --- a/drivers/isdn/Makefile +++ b/drivers/isdn/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_ISDN_I4L) += i4l/ obj-$(CONFIG_ISDN_CAPI) += capi/ obj-$(CONFIG_MISDN) += mISDN/ -obj-$(CONFIG_ISDN_CAPI) += hardware/ +obj-$(CONFIG_ISDN) += hardware/ obj-$(CONFIG_ISDN_DIVERSION) += divert/ obj-$(CONFIG_ISDN_DRV_HISAX) += hisax/ obj-$(CONFIG_ISDN_DRV_ICN) += icn/ -- cgit v1.2.3 From ff4cc1de2401ad44ae084c3f5a9e898af0879520 Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Wed, 30 Jul 2008 18:26:58 +0200 Subject: mISDN cleanup user interface The channelmap should have the same size on 32 and 64 bit systems and should not depend on endianess. Thanks to David Woodhouse for spotting this. Signed-off-by: Karsten Keil --- drivers/isdn/hardware/mISDN/hfcmulti.c | 6 +++--- drivers/isdn/hardware/mISDN/hfcpci.c | 2 +- drivers/isdn/mISDN/l1oip_core.c | 6 ++---- drivers/isdn/mISDN/socket.c | 4 ++-- include/linux/mISDNif.h | 32 +++++++++++++++++++++++++++----- 5 files changed, 35 insertions(+), 15 deletions(-) diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index 2649ea55a9e8..10144e871c06 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -3971,7 +3971,7 @@ open_bchannel(struct hfc_multi *hc, struct dchannel *dch, struct bchannel *bch; int ch; - if (!test_bit(rq->adr.channel, &dch->dev.channelmap[0])) + if (!test_channelmap(rq->adr.channel, dch->dev.channelmap)) return -EINVAL; if (rq->protocol == ISDN_P_NONE) return -EINVAL; @@ -4587,7 +4587,7 @@ init_e1_port(struct hfc_multi *hc, struct hm_map *m) list_add(&bch->ch.list, &dch->dev.bchannels); hc->chan[ch].bch = bch; hc->chan[ch].port = 0; - test_and_set_bit(bch->nr, &dch->dev.channelmap[0]); + set_channelmap(bch->nr, dch->dev.channelmap); } /* set optical line type */ if (port[Port_cnt] & 0x001) { @@ -4755,7 +4755,7 @@ init_multi_port(struct hfc_multi *hc, int pt) list_add(&bch->ch.list, &dch->dev.bchannels); hc->chan[i + ch].bch = bch; hc->chan[i + ch].port = pt; - test_and_set_bit(bch->nr, &dch->dev.channelmap[0]); + set_channelmap(bch->nr, dch->dev.channelmap); } /* set master clock */ if (port[Port_cnt] & 0x001) { diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c index 3231814e7efa..9cf5edbb1a9b 100644 --- a/drivers/isdn/hardware/mISDN/hfcpci.c +++ b/drivers/isdn/hardware/mISDN/hfcpci.c @@ -2056,7 +2056,7 @@ setup_card(struct hfc_pci *card) card->dch.dev.nrbchan = 2; for (i = 0; i < 2; i++) { card->bch[i].nr = i + 1; - test_and_set_bit(i + 1, &card->dch.dev.channelmap[0]); + set_channelmap(i + 1, card->dch.dev.channelmap); card->bch[i].debug = debug; mISDN_initbchannel(&card->bch[i], MAX_DATA_MEM); card->bch[i].hw = card; diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c index 155b99780c4f..e42150a57780 100644 --- a/drivers/isdn/mISDN/l1oip_core.c +++ b/drivers/isdn/mISDN/l1oip_core.c @@ -1006,8 +1006,7 @@ open_bchannel(struct l1oip *hc, struct dchannel *dch, struct channel_req *rq) struct bchannel *bch; int ch; - if (!test_bit(rq->adr.channel & 0x1f, - &dch->dev.channelmap[rq->adr.channel >> 5])) + if (!test_channelmap(rq->adr.channel, dch->dev.channelmap)) return -EINVAL; if (rq->protocol == ISDN_P_NONE) return -EINVAL; @@ -1412,8 +1411,7 @@ init_card(struct l1oip *hc, int pri, int bundle) bch->ch.nr = i + ch; list_add(&bch->ch.list, &dch->dev.bchannels); hc->chan[i + ch].bch = bch; - test_and_set_bit(bch->nr & 0x1f, - &dch->dev.channelmap[bch->nr >> 5]); + set_channelmap(bch->nr, dch->dev.channelmap); } ret = mISDN_register_device(&dch->dev, hc->name); if (ret) diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c index 4ba4cc364c9e..e5a20f9542d1 100644 --- a/drivers/isdn/mISDN/socket.c +++ b/drivers/isdn/mISDN/socket.c @@ -379,7 +379,7 @@ data_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) di.Bprotocols = dev->Bprotocols | get_all_Bprotocols(); di.protocol = dev->D.protocol; memcpy(di.channelmap, dev->channelmap, - MISDN_CHMAP_SIZE * 4); + sizeof(di.channelmap)); di.nrbchan = dev->nrbchan; strcpy(di.name, dev->name); if (copy_to_user((void __user *)arg, &di, sizeof(di))) @@ -637,7 +637,7 @@ base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) di.Bprotocols = dev->Bprotocols | get_all_Bprotocols(); di.protocol = dev->D.protocol; memcpy(di.channelmap, dev->channelmap, - MISDN_CHMAP_SIZE * 4); + sizeof(di.channelmap)); di.nrbchan = dev->nrbchan; strcpy(di.name, dev->name); if (copy_to_user((void __user *)arg, &di, sizeof(di))) diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h index 5c948f337817..8f2d60da04e7 100644 --- a/include/linux/mISDNif.h +++ b/include/linux/mISDNif.h @@ -37,7 +37,7 @@ */ #define MISDN_MAJOR_VERSION 1 #define MISDN_MINOR_VERSION 0 -#define MISDN_RELEASE 18 +#define MISDN_RELEASE 19 /* primitives for information exchange * generell format @@ -242,7 +242,8 @@ struct mISDNhead { #define TEI_SAPI 63 #define CTRL_SAPI 0 -#define MISDN_CHMAP_SIZE 4 +#define MISDN_MAX_CHANNEL 127 +#define MISDN_CHMAP_SIZE ((MISDN_MAX_CHANNEL + 1) >> 3) #define SOL_MISDN 0 @@ -275,11 +276,32 @@ struct mISDN_devinfo { u_int Dprotocols; u_int Bprotocols; u_int protocol; - u_long channelmap[MISDN_CHMAP_SIZE]; + u_char channelmap[MISDN_CHMAP_SIZE]; u_int nrbchan; char name[MISDN_MAX_IDLEN]; }; +static inline int +test_channelmap(u_int nr, u_char *map) +{ + if (nr <= MISDN_MAX_CHANNEL) + return map[nr >> 3] & (1 << (nr & 7)); + else + return 0; +} + +static inline void +set_channelmap(u_int nr, u_char *map) +{ + map[nr >> 3] |= (1 << (nr & 7)); +} + +static inline void +clear_channelmap(u_int nr, u_char *map) +{ + map[nr >> 3] &= ~(1 << (nr & 7)); +} + /* CONTROL_CHANNEL parameters */ #define MISDN_CTRL_GETOP 0x0000 #define MISDN_CTRL_LOOP 0x0001 @@ -405,7 +427,7 @@ struct mISDNdevice { u_int Dprotocols; u_int Bprotocols; u_int nrbchan; - u_long channelmap[MISDN_CHMAP_SIZE]; + u_char channelmap[MISDN_CHMAP_SIZE]; struct list_head bchannels; struct mISDNchannel *teimgr; struct device dev; @@ -430,7 +452,7 @@ struct mISDNstack { #endif }; -/* global alloc/queue dunctions */ +/* global alloc/queue functions */ static inline struct sk_buff * mI_alloc_skb(unsigned int len, gfp_t gfp_mask) -- cgit v1.2.3 From b3e0aeeb7e0f89791c4c3bdfd98b36074c5178e6 Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Sat, 2 Aug 2008 16:35:53 +0200 Subject: Fix remaining big endian issue of hfcmulti The driver was not so bad at big endian at all, only the optimised fifo read/write functions need a fix, with this fix the driver works on a pegasus PPC machine. Signed-off-by: Karsten Keil --- drivers/isdn/hardware/mISDN/hfcmulti.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index 10144e871c06..e36360a583d7 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -140,7 +140,7 @@ * #define HFC_REGISTER_DEBUG */ -static const char *hfcmulti_revision = "2.00"; +static const char *hfcmulti_revision = "2.01"; #include #include @@ -427,12 +427,12 @@ write_fifo_regio(struct hfc_multi *hc, u_char *data, int len) { outb(A_FIFO_DATA0, (hc->pci_iobase)+4); while (len>>2) { - outl(*(u32 *)data, hc->pci_iobase); + outl(cpu_to_le32(*(u32 *)data), hc->pci_iobase); data += 4; len -= 4; } while (len>>1) { - outw(*(u16 *)data, hc->pci_iobase); + outw(cpu_to_le16(*(u16 *)data), hc->pci_iobase); data += 2; len -= 2; } @@ -447,17 +447,19 @@ void write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len) { while (len>>2) { - writel(*(u32 *)data, (hc->pci_membase)+A_FIFO_DATA0); + writel(cpu_to_le32(*(u32 *)data), + hc->pci_membase + A_FIFO_DATA0); data += 4; len -= 4; } while (len>>1) { - writew(*(u16 *)data, (hc->pci_membase)+A_FIFO_DATA0); + writew(cpu_to_le16(*(u16 *)data), + hc->pci_membase + A_FIFO_DATA0); data += 2; len -= 2; } while (len) { - writeb(*data, (hc->pci_membase)+A_FIFO_DATA0); + writeb(*data, hc->pci_membase + A_FIFO_DATA0); data++; len--; } @@ -468,12 +470,12 @@ read_fifo_regio(struct hfc_multi *hc, u_char *data, int len) { outb(A_FIFO_DATA0, (hc->pci_iobase)+4); while (len>>2) { - *(u32 *)data = inl(hc->pci_iobase); + *(u32 *)data = le32_to_cpu(inl(hc->pci_iobase)); data += 4; len -= 4; } while (len>>1) { - *(u16 *)data = inw(hc->pci_iobase); + *(u16 *)data = le16_to_cpu(inw(hc->pci_iobase)); data += 2; len -= 2; } @@ -490,18 +492,18 @@ read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len) { while (len>>2) { *(u32 *)data = - readl((hc->pci_membase)+A_FIFO_DATA0); + le32_to_cpu(readl(hc->pci_membase + A_FIFO_DATA0)); data += 4; len -= 4; } while (len>>1) { *(u16 *)data = - readw((hc->pci_membase)+A_FIFO_DATA0); + le16_to_cpu(readw(hc->pci_membase + A_FIFO_DATA0)); data += 2; len -= 2; } while (len) { - *data = readb((hc->pci_membase)+A_FIFO_DATA0); + *data = readb(hc->pci_membase + A_FIFO_DATA0); data++; len--; } @@ -5251,9 +5253,6 @@ HFCmulti_init(void) if (debug & DEBUG_HFCMULTI_INIT) printk(KERN_DEBUG "%s: init entered\n", __func__); -#ifdef __BIG_ENDIAN -#error "not running on big endian machines now" -#endif hfc_interrupt = symbol_get(ztdummy_extern_interrupt); register_interrupt = symbol_get(ztdummy_register_interrupt); unregister_interrupt = symbol_get(ztdummy_unregister_interrupt); -- cgit v1.2.3 From 31981db0d0b665713ab3e9531f936fdb67947225 Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Sat, 2 Aug 2008 16:40:37 +0200 Subject: Add DIP switch readout for HFC-4S IOB4ST Also the HFC-4S IOB4ST has DIP switches and jumpers to configure the port. Signed-off-by: Karsten Keil --- drivers/isdn/hardware/mISDN/hfcmulti.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index e36360a583d7..1eac03f39d00 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -140,7 +140,7 @@ * #define HFC_REGISTER_DEBUG */ -static const char *hfcmulti_revision = "2.01"; +static const char *hfcmulti_revision = "2.02"; #include #include @@ -5052,12 +5052,12 @@ static void __devexit hfc_remove_pci(struct pci_dev *pdev) static const struct hm_map hfcm_map[] = { /*0*/ {VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0}, -/*1*/ {VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S}, +/*1*/ {VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0}, /*2*/ {VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0}, /*3*/ {VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0}, /*4*/ {VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0}, /*5*/ {VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0}, -/*6*/ {VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, 0, 0}, +/*6*/ {VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0}, /*7*/ {VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0}, /*8*/ {VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO}, /*9*/ {VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0}, -- cgit v1.2.3 From 84209e02de48d72289650cc5a7ae8dd18223620f Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Fri, 1 Aug 2008 20:28:47 +0200 Subject: mm: dont clear PG_uptodate on truncate/invalidate Brian Wang reported that a FUSE filesystem exported through NFS could return I/O errors on read. This was traced to splice_direct_to_actor() returning a short or zero count when racing with page invalidation. However this is not FUSE or NFSD specific, other filesystems (notably NFS) also call invalidate_inode_pages2() to purge stale data from the cache. If this happens while such pages are sitting in a pipe buffer, then splice(2) from the pipe can return zero, and read(2) from the pipe can return ENODATA. The zero return is especially bad, since it implies end-of-file or disconnected pipe/socket, and is documented as such for splice. But returning an error for read() is also nasty, when in fact there was no error (data becoming stale is not an error). The same problems can be triggered by "hole punching" with madvise(MADV_REMOVE). Fix this by not clearing the PG_uptodate flag on truncation and invalidation. Signed-off-by: Miklos Szeredi Acked-by: Nick Piggin Cc: Andrew Morton Cc: Jens Axboe Signed-off-by: Linus Torvalds --- mm/truncate.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/mm/truncate.c b/mm/truncate.c index e68443d74567..894e9a70699f 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -104,7 +104,6 @@ truncate_complete_page(struct address_space *mapping, struct page *page) cancel_dirty_page(page, PAGE_CACHE_SIZE); remove_from_page_cache(page); - ClearPageUptodate(page); ClearPageMappedToDisk(page); page_cache_release(page); /* pagecache ref */ } @@ -356,7 +355,6 @@ invalidate_complete_page2(struct address_space *mapping, struct page *page) BUG_ON(PagePrivate(page)); __remove_from_page_cache(page); spin_unlock_irq(&mapping->tree_lock); - ClearPageUptodate(page); page_cache_release(page); /* pagecache ref */ return 1; failed: -- cgit v1.2.3 From 17263849c7ad2279667dd298083eceefcd1b5845 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Sat, 2 Aug 2008 13:59:37 +0900 Subject: fat: Fix allow_utime option FAT has to handle the newly introduced ATTR_TIMES_SET for allow_utime option. Signed-off-by: OGAWA Hirofumi Signed-off-by: Linus Torvalds --- fs/fat/file.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/fat/file.c b/fs/fat/file.c index 8707a8cfa02c..ddde37025ca6 100644 --- a/fs/fat/file.c +++ b/fs/fat/file.c @@ -313,6 +313,8 @@ static int fat_allow_set_time(struct msdos_sb_info *sbi, struct inode *inode) return 0; } +#define TIMES_SET_FLAGS (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET) + int fat_setattr(struct dentry *dentry, struct iattr *attr) { struct msdos_sb_info *sbi = MSDOS_SB(dentry->d_sb); @@ -336,9 +338,9 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr) /* Check for setting the inode time. */ ia_valid = attr->ia_valid; - if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET)) { + if (ia_valid & TIMES_SET_FLAGS) { if (fat_allow_set_time(sbi, inode)) - attr->ia_valid &= ~(ATTR_MTIME_SET | ATTR_ATIME_SET); + attr->ia_valid &= ~TIMES_SET_FLAGS; } error = inode_change_ok(inode, attr); -- cgit v1.2.3 From 85ebd00334099fd5d296bcae74a66c943d46686d Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sat, 2 Aug 2008 19:12:23 +0200 Subject: Fix IHEX firmware generation/loading Fix both the IHEX firmware generation (len field always null, and EOF marker a byte too short) and loading (struct ihex_binrec needs to be packed to reflect the on-disk structure). Signed-off-by: Marc Zyngier Signed-off-by: David Woodhouse --- firmware/ihex2fw.c | 6 +++--- include/linux/ihex.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/firmware/ihex2fw.c b/firmware/ihex2fw.c index 660b191ed75e..8f7fdaa9e010 100644 --- a/firmware/ihex2fw.c +++ b/firmware/ihex2fw.c @@ -250,19 +250,19 @@ static void file_record(struct ihex_binrec *record) static int output_records(int outfd) { - unsigned char zeroes[5] = {0, 0, 0, 0, 0}; + unsigned char zeroes[6] = {0, 0, 0, 0, 0, 0}; struct ihex_binrec *p = records; while (p) { uint16_t writelen = (p->len + 9) & ~3; p->addr = htonl(p->addr); - p->len = htonl(p->len); + p->len = htons(p->len); write(outfd, &p->addr, writelen); p = p->next; } /* EOF record is zero length, since we don't bother to represent the type field in the binary version */ - write(outfd, zeroes, 5); + write(outfd, zeroes, 6); return 0; } diff --git a/include/linux/ihex.h b/include/linux/ihex.h index 2baace2788a7..31d8629e75a1 100644 --- a/include/linux/ihex.h +++ b/include/linux/ihex.h @@ -18,7 +18,7 @@ struct ihex_binrec { __be32 addr; __be16 len; uint8_t data[0]; -} __attribute__((aligned(4))); +} __attribute__((packed)); /* Find the next record, taking into account the 4-byte alignment */ static inline const struct ihex_binrec * -- cgit v1.2.3 From 8401d92ba46a1e859464cbd9c9ee304f6e361da3 Mon Sep 17 00:00:00 2001 From: David Moore Date: Tue, 29 Jul 2008 23:46:25 -0700 Subject: firewire: Preserve response data alignment bug when it is harmless Recently, a bug having to do with the alignment of transaction response data was fixed. However, some apps such as libdc1394 relied on the presence of that bug in order to function correctly. In order to stay compatible with old versions of those apps, this patch preserves the bug in cases where it is harmless to normal operation (such as the single quadlet read) due to a simple duplication of data. This guarantees maximum compatability for those users who are using the old app with the fixed kernel. Signed-off-by: David Moore Signed-off-by: Stefan Richter --- drivers/firewire/fw-cdev.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c index bc81d6fcd2fd..2e6d5848d217 100644 --- a/drivers/firewire/fw-cdev.c +++ b/drivers/firewire/fw-cdev.c @@ -369,22 +369,33 @@ complete_transaction(struct fw_card *card, int rcode, struct response *response = data; struct client *client = response->client; unsigned long flags; + struct fw_cdev_event_response *r = &response->response; - if (length < response->response.length) - response->response.length = length; + if (length < r->length) + r->length = length; if (rcode == RCODE_COMPLETE) - memcpy(response->response.data, payload, - response->response.length); + memcpy(r->data, payload, r->length); spin_lock_irqsave(&client->lock, flags); list_del(&response->resource.link); spin_unlock_irqrestore(&client->lock, flags); - response->response.type = FW_CDEV_EVENT_RESPONSE; - response->response.rcode = rcode; - queue_event(client, &response->event, &response->response, - sizeof(response->response) + response->response.length, - NULL, 0); + r->type = FW_CDEV_EVENT_RESPONSE; + r->rcode = rcode; + + /* + * In the case that sizeof(*r) doesn't align with the position of the + * data, and the read is short, preserve an extra copy of the data + * to stay compatible with a pre-2.6.27 bug. Since the bug is harmless + * for short reads and some apps depended on it, this is both safe + * and prudent for compatibility. + */ + if (r->length <= sizeof(*r) - offsetof(typeof(*r), data)) + queue_event(client, &response->event, r, sizeof(*r), + r->data, r->length); + else + queue_event(client, &response->event, r, sizeof(*r) + r->length, + NULL, 0); } static int ioctl_send_request(struct client *client, void *buffer) -- cgit v1.2.3 From 4baa9922430662431231ac637adedddbb0cfb2d7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 2 Aug 2008 10:55:55 +0100 Subject: [ARM] move include/asm-arm to arch/arm/include/asm Move platform independent header files to arch/arm/include/asm, leaving those in asm/arch* and asm/plat* alone. Signed-off-by: Russell King --- arch/arm/include/asm/Kbuild | 3 + arch/arm/include/asm/a.out-core.h | 49 ++ arch/arm/include/asm/a.out.h | 34 + arch/arm/include/asm/assembler.h | 116 +++ arch/arm/include/asm/atomic.h | 212 ++++++ arch/arm/include/asm/auxvec.h | 4 + arch/arm/include/asm/bitops.h | 340 +++++++++ arch/arm/include/asm/bug.h | 24 + arch/arm/include/asm/bugs.h | 21 + arch/arm/include/asm/byteorder.h | 58 ++ arch/arm/include/asm/cache.h | 10 + arch/arm/include/asm/cacheflush.h | 537 ++++++++++++++ arch/arm/include/asm/checksum.h | 139 ++++ arch/arm/include/asm/cnt32_to_63.h | 78 ++ arch/arm/include/asm/cpu-multi32.h | 69 ++ arch/arm/include/asm/cpu-single.h | 44 ++ arch/arm/include/asm/cpu.h | 25 + arch/arm/include/asm/cputime.h | 6 + arch/arm/include/asm/current.h | 15 + arch/arm/include/asm/delay.h | 44 ++ arch/arm/include/asm/device.h | 15 + arch/arm/include/asm/div64.h | 227 ++++++ arch/arm/include/asm/dma-mapping.h | 456 ++++++++++++ arch/arm/include/asm/dma.h | 143 ++++ arch/arm/include/asm/domain.h | 78 ++ arch/arm/include/asm/ecard.h | 219 ++++++ arch/arm/include/asm/elf.h | 116 +++ arch/arm/include/asm/emergency-restart.h | 6 + arch/arm/include/asm/errno.h | 6 + arch/arm/include/asm/fb.h | 19 + arch/arm/include/asm/fcntl.h | 11 + arch/arm/include/asm/fiq.h | 37 + arch/arm/include/asm/flat.h | 19 + arch/arm/include/asm/floppy.h | 148 ++++ arch/arm/include/asm/fpstate.h | 93 +++ arch/arm/include/asm/ftrace.h | 14 + arch/arm/include/asm/futex.h | 6 + arch/arm/include/asm/glue.h | 149 ++++ arch/arm/include/asm/gpio.h | 7 + arch/arm/include/asm/hardirq.h | 32 + arch/arm/include/asm/hardware.h | 18 + arch/arm/include/asm/hardware/arm_timer.h | 21 + arch/arm/include/asm/hardware/arm_twd.h | 21 + arch/arm/include/asm/hardware/cache-l2x0.h | 56 ++ arch/arm/include/asm/hardware/clps7111.h | 184 +++++ arch/arm/include/asm/hardware/cs89712.h | 49 ++ arch/arm/include/asm/hardware/debug-8250.S | 29 + arch/arm/include/asm/hardware/debug-pl01x.S | 29 + arch/arm/include/asm/hardware/dec21285.h | 147 ++++ arch/arm/include/asm/hardware/entry-macro-iomd.S | 139 ++++ arch/arm/include/asm/hardware/ep7211.h | 40 + arch/arm/include/asm/hardware/ep7212.h | 83 +++ arch/arm/include/asm/hardware/gic.h | 42 ++ arch/arm/include/asm/hardware/icst307.h | 38 + arch/arm/include/asm/hardware/icst525.h | 36 + arch/arm/include/asm/hardware/ioc.h | 72 ++ arch/arm/include/asm/hardware/iomd.h | 226 ++++++ arch/arm/include/asm/hardware/iop3xx-adma.h | 888 +++++++++++++++++++++++ arch/arm/include/asm/hardware/iop3xx-gpio.h | 73 ++ arch/arm/include/asm/hardware/iop3xx.h | 312 ++++++++ arch/arm/include/asm/hardware/iop_adma.h | 116 +++ arch/arm/include/asm/hardware/it8152.h | 99 +++ arch/arm/include/asm/hardware/linkup-l1110.h | 48 ++ arch/arm/include/asm/hardware/locomo.h | 217 ++++++ arch/arm/include/asm/hardware/memc.h | 26 + arch/arm/include/asm/hardware/pci_v3.h | 186 +++++ arch/arm/include/asm/hardware/sa1111.h | 581 +++++++++++++++ arch/arm/include/asm/hardware/scoop.h | 69 ++ arch/arm/include/asm/hardware/sharpsl_pm.h | 106 +++ arch/arm/include/asm/hardware/ssp.h | 28 + arch/arm/include/asm/hardware/uengine.h | 62 ++ arch/arm/include/asm/hardware/vic.h | 45 ++ arch/arm/include/asm/hw_irq.h | 9 + arch/arm/include/asm/hwcap.h | 29 + arch/arm/include/asm/ide.h | 23 + arch/arm/include/asm/io.h | 287 ++++++++ arch/arm/include/asm/ioctl.h | 1 + arch/arm/include/asm/ioctls.h | 84 +++ arch/arm/include/asm/ipcbuf.h | 29 + arch/arm/include/asm/irq.h | 28 + arch/arm/include/asm/irq_regs.h | 1 + arch/arm/include/asm/irqflags.h | 132 ++++ arch/arm/include/asm/kdebug.h | 1 + arch/arm/include/asm/kexec.h | 31 + arch/arm/include/asm/kgdb.h | 104 +++ arch/arm/include/asm/kmap_types.h | 24 + arch/arm/include/asm/kprobes.h | 79 ++ arch/arm/include/asm/leds.h | 50 ++ arch/arm/include/asm/limits.h | 11 + arch/arm/include/asm/linkage.h | 11 + arch/arm/include/asm/local.h | 1 + arch/arm/include/asm/locks.h | 274 +++++++ arch/arm/include/asm/mach/arch.h | 60 ++ arch/arm/include/asm/mach/dma.h | 57 ++ arch/arm/include/asm/mach/flash.h | 39 + arch/arm/include/asm/mach/irda.h | 20 + arch/arm/include/asm/mach/irq.h | 54 ++ arch/arm/include/asm/mach/map.h | 36 + arch/arm/include/asm/mach/mmc.h | 15 + arch/arm/include/asm/mach/pci.h | 72 ++ arch/arm/include/asm/mach/serial_at91.h | 33 + arch/arm/include/asm/mach/serial_sa1100.h | 31 + arch/arm/include/asm/mach/sharpsl_param.h | 37 + arch/arm/include/asm/mach/time.h | 57 ++ arch/arm/include/asm/mach/udc_pxa2xx.h | 29 + arch/arm/include/asm/mc146818rtc.h | 28 + arch/arm/include/asm/memory.h | 334 +++++++++ arch/arm/include/asm/mman.h | 17 + arch/arm/include/asm/mmu.h | 33 + arch/arm/include/asm/mmu_context.h | 117 +++ arch/arm/include/asm/mmzone.h | 30 + arch/arm/include/asm/module.h | 18 + arch/arm/include/asm/msgbuf.h | 31 + arch/arm/include/asm/mtd-xip.h | 26 + arch/arm/include/asm/mutex.h | 127 ++++ arch/arm/include/asm/nwflash.h | 9 + arch/arm/include/asm/page-nommu.h | 49 ++ arch/arm/include/asm/page.h | 199 +++++ arch/arm/include/asm/param.h | 31 + arch/arm/include/asm/parport.h | 18 + arch/arm/include/asm/pci.h | 91 +++ arch/arm/include/asm/percpu.h | 6 + arch/arm/include/asm/pgalloc.h | 136 ++++ arch/arm/include/asm/pgtable-hwdef.h | 90 +++ arch/arm/include/asm/pgtable-nommu.h | 118 +++ arch/arm/include/asm/pgtable.h | 401 ++++++++++ arch/arm/include/asm/poll.h | 1 + arch/arm/include/asm/posix_types.h | 77 ++ arch/arm/include/asm/proc-fns.h | 241 ++++++ arch/arm/include/asm/processor.h | 131 ++++ arch/arm/include/asm/procinfo.h | 49 ++ arch/arm/include/asm/ptrace.h | 162 +++++ arch/arm/include/asm/resource.h | 6 + arch/arm/include/asm/scatterlist.h | 27 + arch/arm/include/asm/sections.h | 1 + arch/arm/include/asm/segment.h | 11 + arch/arm/include/asm/sembuf.h | 25 + arch/arm/include/asm/serial.h | 19 + arch/arm/include/asm/setup.h | 226 ++++++ arch/arm/include/asm/shmbuf.h | 42 ++ arch/arm/include/asm/shmparam.h | 16 + arch/arm/include/asm/sigcontext.h | 34 + arch/arm/include/asm/siginfo.h | 6 + arch/arm/include/asm/signal.h | 164 +++++ arch/arm/include/asm/sizes.h | 56 ++ arch/arm/include/asm/smp.h | 147 ++++ arch/arm/include/asm/socket.h | 57 ++ arch/arm/include/asm/sockios.h | 13 + arch/arm/include/asm/sparsemem.h | 10 + arch/arm/include/asm/spinlock.h | 224 ++++++ arch/arm/include/asm/spinlock_types.h | 20 + arch/arm/include/asm/stat.h | 87 +++ arch/arm/include/asm/statfs.h | 42 ++ arch/arm/include/asm/string.h | 50 ++ arch/arm/include/asm/suspend.h | 4 + arch/arm/include/asm/system.h | 388 ++++++++++ arch/arm/include/asm/termbits.h | 197 +++++ arch/arm/include/asm/termios.h | 92 +++ arch/arm/include/asm/therm.h | 28 + arch/arm/include/asm/thread_info.h | 153 ++++ arch/arm/include/asm/thread_notify.h | 48 ++ arch/arm/include/asm/timex.h | 24 + arch/arm/include/asm/tlb.h | 94 +++ arch/arm/include/asm/tlbflush.h | 500 +++++++++++++ arch/arm/include/asm/topology.h | 6 + arch/arm/include/asm/traps.h | 29 + arch/arm/include/asm/types.h | 31 + arch/arm/include/asm/uaccess.h | 444 ++++++++++++ arch/arm/include/asm/ucontext.h | 103 +++ arch/arm/include/asm/unaligned.h | 19 + arch/arm/include/asm/unistd.h | 450 ++++++++++++ arch/arm/include/asm/user.h | 84 +++ arch/arm/include/asm/vfp.h | 84 +++ arch/arm/include/asm/vfpmacros.h | 47 ++ arch/arm/include/asm/vga.h | 12 + arch/arm/include/asm/xor.h | 141 ++++ arch/arm/kernel/head-common.S | 2 +- arch/arm/lib/getuser.S | 2 +- arch/arm/lib/putuser.S | 2 +- arch/arm/mm/ioremap.c | 2 +- arch/arm/mm/proc-arm720.S | 2 +- arch/arm/nwfpe/fpa11.h | 2 +- include/asm-arm/Kbuild | 3 - include/asm-arm/a.out-core.h | 49 -- include/asm-arm/a.out.h | 34 - include/asm-arm/assembler.h | 116 --- include/asm-arm/atomic.h | 212 ------ include/asm-arm/auxvec.h | 4 - include/asm-arm/bitops.h | 340 --------- include/asm-arm/bug.h | 24 - include/asm-arm/bugs.h | 21 - include/asm-arm/byteorder.h | 58 -- include/asm-arm/cache.h | 10 - include/asm-arm/cacheflush.h | 537 -------------- include/asm-arm/checksum.h | 139 ---- include/asm-arm/cnt32_to_63.h | 78 -- include/asm-arm/cpu-multi32.h | 69 -- include/asm-arm/cpu-single.h | 44 -- include/asm-arm/cpu.h | 25 - include/asm-arm/cputime.h | 6 - include/asm-arm/current.h | 15 - include/asm-arm/delay.h | 44 -- include/asm-arm/device.h | 15 - include/asm-arm/div64.h | 227 ------ include/asm-arm/dma-mapping.h | 456 ------------ include/asm-arm/dma.h | 143 ---- include/asm-arm/domain.h | 78 -- include/asm-arm/ecard.h | 219 ------ include/asm-arm/elf.h | 116 --- include/asm-arm/emergency-restart.h | 6 - include/asm-arm/errno.h | 6 - include/asm-arm/fb.h | 19 - include/asm-arm/fcntl.h | 11 - include/asm-arm/fiq.h | 37 - include/asm-arm/flat.h | 19 - include/asm-arm/floppy.h | 148 ---- include/asm-arm/fpstate.h | 93 --- include/asm-arm/ftrace.h | 14 - include/asm-arm/futex.h | 6 - include/asm-arm/glue.h | 149 ---- include/asm-arm/gpio.h | 7 - include/asm-arm/hardirq.h | 32 - include/asm-arm/hardware.h | 18 - include/asm-arm/hardware/arm_timer.h | 21 - include/asm-arm/hardware/arm_twd.h | 21 - include/asm-arm/hardware/cache-l2x0.h | 56 -- include/asm-arm/hardware/clps7111.h | 184 ----- include/asm-arm/hardware/cs89712.h | 49 -- include/asm-arm/hardware/debug-8250.S | 29 - include/asm-arm/hardware/debug-pl01x.S | 29 - include/asm-arm/hardware/dec21285.h | 147 ---- include/asm-arm/hardware/entry-macro-iomd.S | 139 ---- include/asm-arm/hardware/ep7211.h | 40 - include/asm-arm/hardware/ep7212.h | 83 --- include/asm-arm/hardware/gic.h | 42 -- include/asm-arm/hardware/icst307.h | 38 - include/asm-arm/hardware/icst525.h | 36 - include/asm-arm/hardware/ioc.h | 72 -- include/asm-arm/hardware/iomd.h | 226 ------ include/asm-arm/hardware/iop3xx-adma.h | 888 ----------------------- include/asm-arm/hardware/iop3xx-gpio.h | 73 -- include/asm-arm/hardware/iop3xx.h | 312 -------- include/asm-arm/hardware/iop_adma.h | 116 --- include/asm-arm/hardware/it8152.h | 99 --- include/asm-arm/hardware/linkup-l1110.h | 48 -- include/asm-arm/hardware/locomo.h | 217 ------ include/asm-arm/hardware/memc.h | 26 - include/asm-arm/hardware/pci_v3.h | 186 ----- include/asm-arm/hardware/sa1111.h | 581 --------------- include/asm-arm/hardware/scoop.h | 69 -- include/asm-arm/hardware/sharpsl_pm.h | 106 --- include/asm-arm/hardware/ssp.h | 28 - include/asm-arm/hardware/uengine.h | 62 -- include/asm-arm/hardware/vic.h | 45 -- include/asm-arm/hw_irq.h | 9 - include/asm-arm/hwcap.h | 29 - include/asm-arm/ide.h | 23 - include/asm-arm/io.h | 287 -------- include/asm-arm/ioctl.h | 1 - include/asm-arm/ioctls.h | 84 --- include/asm-arm/ipcbuf.h | 29 - include/asm-arm/irq.h | 28 - include/asm-arm/irq_regs.h | 1 - include/asm-arm/irqflags.h | 132 ---- include/asm-arm/kdebug.h | 1 - include/asm-arm/kexec.h | 31 - include/asm-arm/kgdb.h | 104 --- include/asm-arm/kmap_types.h | 24 - include/asm-arm/kprobes.h | 79 -- include/asm-arm/leds.h | 50 -- include/asm-arm/limits.h | 11 - include/asm-arm/linkage.h | 11 - include/asm-arm/local.h | 1 - include/asm-arm/locks.h | 274 ------- include/asm-arm/mach/arch.h | 60 -- include/asm-arm/mach/dma.h | 57 -- include/asm-arm/mach/flash.h | 39 - include/asm-arm/mach/irda.h | 20 - include/asm-arm/mach/irq.h | 54 -- include/asm-arm/mach/map.h | 36 - include/asm-arm/mach/mmc.h | 15 - include/asm-arm/mach/pci.h | 72 -- include/asm-arm/mach/serial_at91.h | 33 - include/asm-arm/mach/serial_sa1100.h | 31 - include/asm-arm/mach/sharpsl_param.h | 37 - include/asm-arm/mach/time.h | 57 -- include/asm-arm/mach/udc_pxa2xx.h | 29 - include/asm-arm/mc146818rtc.h | 28 - include/asm-arm/memory.h | 334 --------- include/asm-arm/mman.h | 17 - include/asm-arm/mmu.h | 33 - include/asm-arm/mmu_context.h | 117 --- include/asm-arm/mmzone.h | 30 - include/asm-arm/module.h | 18 - include/asm-arm/msgbuf.h | 31 - include/asm-arm/mtd-xip.h | 26 - include/asm-arm/mutex.h | 127 ---- include/asm-arm/nwflash.h | 9 - include/asm-arm/page-nommu.h | 49 -- include/asm-arm/page.h | 199 ----- include/asm-arm/param.h | 31 - include/asm-arm/parport.h | 18 - include/asm-arm/pci.h | 91 --- include/asm-arm/percpu.h | 6 - include/asm-arm/pgalloc.h | 136 ---- include/asm-arm/pgtable-hwdef.h | 90 --- include/asm-arm/pgtable-nommu.h | 118 --- include/asm-arm/pgtable.h | 401 ---------- include/asm-arm/poll.h | 1 - include/asm-arm/posix_types.h | 77 -- include/asm-arm/proc-fns.h | 241 ------ include/asm-arm/processor.h | 131 ---- include/asm-arm/procinfo.h | 49 -- include/asm-arm/ptrace.h | 162 ----- include/asm-arm/resource.h | 6 - include/asm-arm/scatterlist.h | 27 - include/asm-arm/sections.h | 1 - include/asm-arm/segment.h | 11 - include/asm-arm/sembuf.h | 25 - include/asm-arm/serial.h | 19 - include/asm-arm/setup.h | 226 ------ include/asm-arm/shmbuf.h | 42 -- include/asm-arm/shmparam.h | 16 - include/asm-arm/sigcontext.h | 34 - include/asm-arm/siginfo.h | 6 - include/asm-arm/signal.h | 164 ----- include/asm-arm/sizes.h | 56 -- include/asm-arm/smp.h | 147 ---- include/asm-arm/socket.h | 57 -- include/asm-arm/sockios.h | 13 - include/asm-arm/sparsemem.h | 10 - include/asm-arm/spinlock.h | 224 ------ include/asm-arm/spinlock_types.h | 20 - include/asm-arm/stat.h | 87 --- include/asm-arm/statfs.h | 42 -- include/asm-arm/string.h | 50 -- include/asm-arm/suspend.h | 4 - include/asm-arm/system.h | 388 ---------- include/asm-arm/termbits.h | 197 ----- include/asm-arm/termios.h | 92 --- include/asm-arm/therm.h | 28 - include/asm-arm/thread_info.h | 153 ---- include/asm-arm/thread_notify.h | 48 -- include/asm-arm/timex.h | 24 - include/asm-arm/tlb.h | 94 --- include/asm-arm/tlbflush.h | 500 ------------- include/asm-arm/topology.h | 6 - include/asm-arm/traps.h | 29 - include/asm-arm/types.h | 31 - include/asm-arm/uaccess.h | 444 ------------ include/asm-arm/ucontext.h | 103 --- include/asm-arm/unaligned.h | 19 - include/asm-arm/unistd.h | 450 ------------ include/asm-arm/user.h | 84 --- include/asm-arm/vfp.h | 84 --- include/asm-arm/vfpmacros.h | 47 -- include/asm-arm/vga.h | 12 - include/asm-arm/xor.h | 141 ---- 358 files changed, 16301 insertions(+), 16301 deletions(-) create mode 100644 arch/arm/include/asm/Kbuild create mode 100644 arch/arm/include/asm/a.out-core.h create mode 100644 arch/arm/include/asm/a.out.h create mode 100644 arch/arm/include/asm/assembler.h create mode 100644 arch/arm/include/asm/atomic.h create mode 100644 arch/arm/include/asm/auxvec.h create mode 100644 arch/arm/include/asm/bitops.h create mode 100644 arch/arm/include/asm/bug.h create mode 100644 arch/arm/include/asm/bugs.h create mode 100644 arch/arm/include/asm/byteorder.h create mode 100644 arch/arm/include/asm/cache.h create mode 100644 arch/arm/include/asm/cacheflush.h create mode 100644 arch/arm/include/asm/checksum.h create mode 100644 arch/arm/include/asm/cnt32_to_63.h create mode 100644 arch/arm/include/asm/cpu-multi32.h create mode 100644 arch/arm/include/asm/cpu-single.h create mode 100644 arch/arm/include/asm/cpu.h create mode 100644 arch/arm/include/asm/cputime.h create mode 100644 arch/arm/include/asm/current.h create mode 100644 arch/arm/include/asm/delay.h create mode 100644 arch/arm/include/asm/device.h create mode 100644 arch/arm/include/asm/div64.h create mode 100644 arch/arm/include/asm/dma-mapping.h create mode 100644 arch/arm/include/asm/dma.h create mode 100644 arch/arm/include/asm/domain.h create mode 100644 arch/arm/include/asm/ecard.h create mode 100644 arch/arm/include/asm/elf.h create mode 100644 arch/arm/include/asm/emergency-restart.h create mode 100644 arch/arm/include/asm/errno.h create mode 100644 arch/arm/include/asm/fb.h create mode 100644 arch/arm/include/asm/fcntl.h create mode 100644 arch/arm/include/asm/fiq.h create mode 100644 arch/arm/include/asm/flat.h create mode 100644 arch/arm/include/asm/floppy.h create mode 100644 arch/arm/include/asm/fpstate.h create mode 100644 arch/arm/include/asm/ftrace.h create mode 100644 arch/arm/include/asm/futex.h create mode 100644 arch/arm/include/asm/glue.h create mode 100644 arch/arm/include/asm/gpio.h create mode 100644 arch/arm/include/asm/hardirq.h create mode 100644 arch/arm/include/asm/hardware.h create mode 100644 arch/arm/include/asm/hardware/arm_timer.h create mode 100644 arch/arm/include/asm/hardware/arm_twd.h create mode 100644 arch/arm/include/asm/hardware/cache-l2x0.h create mode 100644 arch/arm/include/asm/hardware/clps7111.h create mode 100644 arch/arm/include/asm/hardware/cs89712.h create mode 100644 arch/arm/include/asm/hardware/debug-8250.S create mode 100644 arch/arm/include/asm/hardware/debug-pl01x.S create mode 100644 arch/arm/include/asm/hardware/dec21285.h create mode 100644 arch/arm/include/asm/hardware/entry-macro-iomd.S create mode 100644 arch/arm/include/asm/hardware/ep7211.h create mode 100644 arch/arm/include/asm/hardware/ep7212.h create mode 100644 arch/arm/include/asm/hardware/gic.h create mode 100644 arch/arm/include/asm/hardware/icst307.h create mode 100644 arch/arm/include/asm/hardware/icst525.h create mode 100644 arch/arm/include/asm/hardware/ioc.h create mode 100644 arch/arm/include/asm/hardware/iomd.h create mode 100644 arch/arm/include/asm/hardware/iop3xx-adma.h create mode 100644 arch/arm/include/asm/hardware/iop3xx-gpio.h create mode 100644 arch/arm/include/asm/hardware/iop3xx.h create mode 100644 arch/arm/include/asm/hardware/iop_adma.h create mode 100644 arch/arm/include/asm/hardware/it8152.h create mode 100644 arch/arm/include/asm/hardware/linkup-l1110.h create mode 100644 arch/arm/include/asm/hardware/locomo.h create mode 100644 arch/arm/include/asm/hardware/memc.h create mode 100644 arch/arm/include/asm/hardware/pci_v3.h create mode 100644 arch/arm/include/asm/hardware/sa1111.h create mode 100644 arch/arm/include/asm/hardware/scoop.h create mode 100644 arch/arm/include/asm/hardware/sharpsl_pm.h create mode 100644 arch/arm/include/asm/hardware/ssp.h create mode 100644 arch/arm/include/asm/hardware/uengine.h create mode 100644 arch/arm/include/asm/hardware/vic.h create mode 100644 arch/arm/include/asm/hw_irq.h create mode 100644 arch/arm/include/asm/hwcap.h create mode 100644 arch/arm/include/asm/ide.h create mode 100644 arch/arm/include/asm/io.h create mode 100644 arch/arm/include/asm/ioctl.h create mode 100644 arch/arm/include/asm/ioctls.h create mode 100644 arch/arm/include/asm/ipcbuf.h create mode 100644 arch/arm/include/asm/irq.h create mode 100644 arch/arm/include/asm/irq_regs.h create mode 100644 arch/arm/include/asm/irqflags.h create mode 100644 arch/arm/include/asm/kdebug.h create mode 100644 arch/arm/include/asm/kexec.h create mode 100644 arch/arm/include/asm/kgdb.h create mode 100644 arch/arm/include/asm/kmap_types.h create mode 100644 arch/arm/include/asm/kprobes.h create mode 100644 arch/arm/include/asm/leds.h create mode 100644 arch/arm/include/asm/limits.h create mode 100644 arch/arm/include/asm/linkage.h create mode 100644 arch/arm/include/asm/local.h create mode 100644 arch/arm/include/asm/locks.h create mode 100644 arch/arm/include/asm/mach/arch.h create mode 100644 arch/arm/include/asm/mach/dma.h create mode 100644 arch/arm/include/asm/mach/flash.h create mode 100644 arch/arm/include/asm/mach/irda.h create mode 100644 arch/arm/include/asm/mach/irq.h create mode 100644 arch/arm/include/asm/mach/map.h create mode 100644 arch/arm/include/asm/mach/mmc.h create mode 100644 arch/arm/include/asm/mach/pci.h create mode 100644 arch/arm/include/asm/mach/serial_at91.h create mode 100644 arch/arm/include/asm/mach/serial_sa1100.h create mode 100644 arch/arm/include/asm/mach/sharpsl_param.h create mode 100644 arch/arm/include/asm/mach/time.h create mode 100644 arch/arm/include/asm/mach/udc_pxa2xx.h create mode 100644 arch/arm/include/asm/mc146818rtc.h create mode 100644 arch/arm/include/asm/memory.h create mode 100644 arch/arm/include/asm/mman.h create mode 100644 arch/arm/include/asm/mmu.h create mode 100644 arch/arm/include/asm/mmu_context.h create mode 100644 arch/arm/include/asm/mmzone.h create mode 100644 arch/arm/include/asm/module.h create mode 100644 arch/arm/include/asm/msgbuf.h create mode 100644 arch/arm/include/asm/mtd-xip.h create mode 100644 arch/arm/include/asm/mutex.h create mode 100644 arch/arm/include/asm/nwflash.h create mode 100644 arch/arm/include/asm/page-nommu.h create mode 100644 arch/arm/include/asm/page.h create mode 100644 arch/arm/include/asm/param.h create mode 100644 arch/arm/include/asm/parport.h create mode 100644 arch/arm/include/asm/pci.h create mode 100644 arch/arm/include/asm/percpu.h create mode 100644 arch/arm/include/asm/pgalloc.h create mode 100644 arch/arm/include/asm/pgtable-hwdef.h create mode 100644 arch/arm/include/asm/pgtable-nommu.h create mode 100644 arch/arm/include/asm/pgtable.h create mode 100644 arch/arm/include/asm/poll.h create mode 100644 arch/arm/include/asm/posix_types.h create mode 100644 arch/arm/include/asm/proc-fns.h create mode 100644 arch/arm/include/asm/processor.h create mode 100644 arch/arm/include/asm/procinfo.h create mode 100644 arch/arm/include/asm/ptrace.h create mode 100644 arch/arm/include/asm/resource.h create mode 100644 arch/arm/include/asm/scatterlist.h create mode 100644 arch/arm/include/asm/sections.h create mode 100644 arch/arm/include/asm/segment.h create mode 100644 arch/arm/include/asm/sembuf.h create mode 100644 arch/arm/include/asm/serial.h create mode 100644 arch/arm/include/asm/setup.h create mode 100644 arch/arm/include/asm/shmbuf.h create mode 100644 arch/arm/include/asm/shmparam.h create mode 100644 arch/arm/include/asm/sigcontext.h create mode 100644 arch/arm/include/asm/siginfo.h create mode 100644 arch/arm/include/asm/signal.h create mode 100644 arch/arm/include/asm/sizes.h create mode 100644 arch/arm/include/asm/smp.h create mode 100644 arch/arm/include/asm/socket.h create mode 100644 arch/arm/include/asm/sockios.h create mode 100644 arch/arm/include/asm/sparsemem.h create mode 100644 arch/arm/include/asm/spinlock.h create mode 100644 arch/arm/include/asm/spinlock_types.h create mode 100644 arch/arm/include/asm/stat.h create mode 100644 arch/arm/include/asm/statfs.h create mode 100644 arch/arm/include/asm/string.h create mode 100644 arch/arm/include/asm/suspend.h create mode 100644 arch/arm/include/asm/system.h create mode 100644 arch/arm/include/asm/termbits.h create mode 100644 arch/arm/include/asm/termios.h create mode 100644 arch/arm/include/asm/therm.h create mode 100644 arch/arm/include/asm/thread_info.h create mode 100644 arch/arm/include/asm/thread_notify.h create mode 100644 arch/arm/include/asm/timex.h create mode 100644 arch/arm/include/asm/tlb.h create mode 100644 arch/arm/include/asm/tlbflush.h create mode 100644 arch/arm/include/asm/topology.h create mode 100644 arch/arm/include/asm/traps.h create mode 100644 arch/arm/include/asm/types.h create mode 100644 arch/arm/include/asm/uaccess.h create mode 100644 arch/arm/include/asm/ucontext.h create mode 100644 arch/arm/include/asm/unaligned.h create mode 100644 arch/arm/include/asm/unistd.h create mode 100644 arch/arm/include/asm/user.h create mode 100644 arch/arm/include/asm/vfp.h create mode 100644 arch/arm/include/asm/vfpmacros.h create mode 100644 arch/arm/include/asm/vga.h create mode 100644 arch/arm/include/asm/xor.h delete mode 100644 include/asm-arm/Kbuild delete mode 100644 include/asm-arm/a.out-core.h delete mode 100644 include/asm-arm/a.out.h delete mode 100644 include/asm-arm/assembler.h delete mode 100644 include/asm-arm/atomic.h delete mode 100644 include/asm-arm/auxvec.h delete mode 100644 include/asm-arm/bitops.h delete mode 100644 include/asm-arm/bug.h delete mode 100644 include/asm-arm/bugs.h delete mode 100644 include/asm-arm/byteorder.h delete mode 100644 include/asm-arm/cache.h delete mode 100644 include/asm-arm/cacheflush.h delete mode 100644 include/asm-arm/checksum.h delete mode 100644 include/asm-arm/cnt32_to_63.h delete mode 100644 include/asm-arm/cpu-multi32.h delete mode 100644 include/asm-arm/cpu-single.h delete mode 100644 include/asm-arm/cpu.h delete mode 100644 include/asm-arm/cputime.h delete mode 100644 include/asm-arm/current.h delete mode 100644 include/asm-arm/delay.h delete mode 100644 include/asm-arm/device.h delete mode 100644 include/asm-arm/div64.h delete mode 100644 include/asm-arm/dma-mapping.h delete mode 100644 include/asm-arm/dma.h delete mode 100644 include/asm-arm/domain.h delete mode 100644 include/asm-arm/ecard.h delete mode 100644 include/asm-arm/elf.h delete mode 100644 include/asm-arm/emergency-restart.h delete mode 100644 include/asm-arm/errno.h delete mode 100644 include/asm-arm/fb.h delete mode 100644 include/asm-arm/fcntl.h delete mode 100644 include/asm-arm/fiq.h delete mode 100644 include/asm-arm/flat.h delete mode 100644 include/asm-arm/floppy.h delete mode 100644 include/asm-arm/fpstate.h delete mode 100644 include/asm-arm/ftrace.h delete mode 100644 include/asm-arm/futex.h delete mode 100644 include/asm-arm/glue.h delete mode 100644 include/asm-arm/gpio.h delete mode 100644 include/asm-arm/hardirq.h delete mode 100644 include/asm-arm/hardware.h delete mode 100644 include/asm-arm/hardware/arm_timer.h delete mode 100644 include/asm-arm/hardware/arm_twd.h delete mode 100644 include/asm-arm/hardware/cache-l2x0.h delete mode 100644 include/asm-arm/hardware/clps7111.h delete mode 100644 include/asm-arm/hardware/cs89712.h delete mode 100644 include/asm-arm/hardware/debug-8250.S delete mode 100644 include/asm-arm/hardware/debug-pl01x.S delete mode 100644 include/asm-arm/hardware/dec21285.h delete mode 100644 include/asm-arm/hardware/entry-macro-iomd.S delete mode 100644 include/asm-arm/hardware/ep7211.h delete mode 100644 include/asm-arm/hardware/ep7212.h delete mode 100644 include/asm-arm/hardware/gic.h delete mode 100644 include/asm-arm/hardware/icst307.h delete mode 100644 include/asm-arm/hardware/icst525.h delete mode 100644 include/asm-arm/hardware/ioc.h delete mode 100644 include/asm-arm/hardware/iomd.h delete mode 100644 include/asm-arm/hardware/iop3xx-adma.h delete mode 100644 include/asm-arm/hardware/iop3xx-gpio.h delete mode 100644 include/asm-arm/hardware/iop3xx.h delete mode 100644 include/asm-arm/hardware/iop_adma.h delete mode 100644 include/asm-arm/hardware/it8152.h delete mode 100644 include/asm-arm/hardware/linkup-l1110.h delete mode 100644 include/asm-arm/hardware/locomo.h delete mode 100644 include/asm-arm/hardware/memc.h delete mode 100644 include/asm-arm/hardware/pci_v3.h delete mode 100644 include/asm-arm/hardware/sa1111.h delete mode 100644 include/asm-arm/hardware/scoop.h delete mode 100644 include/asm-arm/hardware/sharpsl_pm.h delete mode 100644 include/asm-arm/hardware/ssp.h delete mode 100644 include/asm-arm/hardware/uengine.h delete mode 100644 include/asm-arm/hardware/vic.h delete mode 100644 include/asm-arm/hw_irq.h delete mode 100644 include/asm-arm/hwcap.h delete mode 100644 include/asm-arm/ide.h delete mode 100644 include/asm-arm/io.h delete mode 100644 include/asm-arm/ioctl.h delete mode 100644 include/asm-arm/ioctls.h delete mode 100644 include/asm-arm/ipcbuf.h delete mode 100644 include/asm-arm/irq.h delete mode 100644 include/asm-arm/irq_regs.h delete mode 100644 include/asm-arm/irqflags.h delete mode 100644 include/asm-arm/kdebug.h delete mode 100644 include/asm-arm/kexec.h delete mode 100644 include/asm-arm/kgdb.h delete mode 100644 include/asm-arm/kmap_types.h delete mode 100644 include/asm-arm/kprobes.h delete mode 100644 include/asm-arm/leds.h delete mode 100644 include/asm-arm/limits.h delete mode 100644 include/asm-arm/linkage.h delete mode 100644 include/asm-arm/local.h delete mode 100644 include/asm-arm/locks.h delete mode 100644 include/asm-arm/mach/arch.h delete mode 100644 include/asm-arm/mach/dma.h delete mode 100644 include/asm-arm/mach/flash.h delete mode 100644 include/asm-arm/mach/irda.h delete mode 100644 include/asm-arm/mach/irq.h delete mode 100644 include/asm-arm/mach/map.h delete mode 100644 include/asm-arm/mach/mmc.h delete mode 100644 include/asm-arm/mach/pci.h delete mode 100644 include/asm-arm/mach/serial_at91.h delete mode 100644 include/asm-arm/mach/serial_sa1100.h delete mode 100644 include/asm-arm/mach/sharpsl_param.h delete mode 100644 include/asm-arm/mach/time.h delete mode 100644 include/asm-arm/mach/udc_pxa2xx.h delete mode 100644 include/asm-arm/mc146818rtc.h delete mode 100644 include/asm-arm/memory.h delete mode 100644 include/asm-arm/mman.h delete mode 100644 include/asm-arm/mmu.h delete mode 100644 include/asm-arm/mmu_context.h delete mode 100644 include/asm-arm/mmzone.h delete mode 100644 include/asm-arm/module.h delete mode 100644 include/asm-arm/msgbuf.h delete mode 100644 include/asm-arm/mtd-xip.h delete mode 100644 include/asm-arm/mutex.h delete mode 100644 include/asm-arm/nwflash.h delete mode 100644 include/asm-arm/page-nommu.h delete mode 100644 include/asm-arm/page.h delete mode 100644 include/asm-arm/param.h delete mode 100644 include/asm-arm/parport.h delete mode 100644 include/asm-arm/pci.h delete mode 100644 include/asm-arm/percpu.h delete mode 100644 include/asm-arm/pgalloc.h delete mode 100644 include/asm-arm/pgtable-hwdef.h delete mode 100644 include/asm-arm/pgtable-nommu.h delete mode 100644 include/asm-arm/pgtable.h delete mode 100644 include/asm-arm/poll.h delete mode 100644 include/asm-arm/posix_types.h delete mode 100644 include/asm-arm/proc-fns.h delete mode 100644 include/asm-arm/processor.h delete mode 100644 include/asm-arm/procinfo.h delete mode 100644 include/asm-arm/ptrace.h delete mode 100644 include/asm-arm/resource.h delete mode 100644 include/asm-arm/scatterlist.h delete mode 100644 include/asm-arm/sections.h delete mode 100644 include/asm-arm/segment.h delete mode 100644 include/asm-arm/sembuf.h delete mode 100644 include/asm-arm/serial.h delete mode 100644 include/asm-arm/setup.h delete mode 100644 include/asm-arm/shmbuf.h delete mode 100644 include/asm-arm/shmparam.h delete mode 100644 include/asm-arm/sigcontext.h delete mode 100644 include/asm-arm/siginfo.h delete mode 100644 include/asm-arm/signal.h delete mode 100644 include/asm-arm/sizes.h delete mode 100644 include/asm-arm/smp.h delete mode 100644 include/asm-arm/socket.h delete mode 100644 include/asm-arm/sockios.h delete mode 100644 include/asm-arm/sparsemem.h delete mode 100644 include/asm-arm/spinlock.h delete mode 100644 include/asm-arm/spinlock_types.h delete mode 100644 include/asm-arm/stat.h delete mode 100644 include/asm-arm/statfs.h delete mode 100644 include/asm-arm/string.h delete mode 100644 include/asm-arm/suspend.h delete mode 100644 include/asm-arm/system.h delete mode 100644 include/asm-arm/termbits.h delete mode 100644 include/asm-arm/termios.h delete mode 100644 include/asm-arm/therm.h delete mode 100644 include/asm-arm/thread_info.h delete mode 100644 include/asm-arm/thread_notify.h delete mode 100644 include/asm-arm/timex.h delete mode 100644 include/asm-arm/tlb.h delete mode 100644 include/asm-arm/tlbflush.h delete mode 100644 include/asm-arm/topology.h delete mode 100644 include/asm-arm/traps.h delete mode 100644 include/asm-arm/types.h delete mode 100644 include/asm-arm/uaccess.h delete mode 100644 include/asm-arm/ucontext.h delete mode 100644 include/asm-arm/unaligned.h delete mode 100644 include/asm-arm/unistd.h delete mode 100644 include/asm-arm/user.h delete mode 100644 include/asm-arm/vfp.h delete mode 100644 include/asm-arm/vfpmacros.h delete mode 100644 include/asm-arm/vga.h delete mode 100644 include/asm-arm/xor.h diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild new file mode 100644 index 000000000000..73237bd130a2 --- /dev/null +++ b/arch/arm/include/asm/Kbuild @@ -0,0 +1,3 @@ +include include/asm-generic/Kbuild.asm + +unifdef-y += hwcap.h diff --git a/arch/arm/include/asm/a.out-core.h b/arch/arm/include/asm/a.out-core.h new file mode 100644 index 000000000000..93d04acaa31f --- /dev/null +++ b/arch/arm/include/asm/a.out-core.h @@ -0,0 +1,49 @@ +/* a.out coredump register dumper + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_A_OUT_CORE_H +#define _ASM_A_OUT_CORE_H + +#ifdef __KERNEL__ + +#include +#include + +/* + * fill in the user structure for an a.out core dump + */ +static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump) +{ + struct task_struct *tsk = current; + + dump->magic = CMAGIC; + dump->start_code = tsk->mm->start_code; + dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1); + + dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT; + dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT; + dump->u_ssize = 0; + + dump->u_debugreg[0] = tsk->thread.debug.bp[0].address; + dump->u_debugreg[1] = tsk->thread.debug.bp[1].address; + dump->u_debugreg[2] = tsk->thread.debug.bp[0].insn.arm; + dump->u_debugreg[3] = tsk->thread.debug.bp[1].insn.arm; + dump->u_debugreg[4] = tsk->thread.debug.nsaved; + + if (dump->start_stack < 0x04000000) + dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT; + + dump->regs = *regs; + dump->u_fpvalid = dump_fpu (regs, &dump->u_fp); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_A_OUT_CORE_H */ diff --git a/arch/arm/include/asm/a.out.h b/arch/arm/include/asm/a.out.h new file mode 100644 index 000000000000..79489fdcc8b8 --- /dev/null +++ b/arch/arm/include/asm/a.out.h @@ -0,0 +1,34 @@ +#ifndef __ARM_A_OUT_H__ +#define __ARM_A_OUT_H__ + +#include +#include + +struct exec +{ + __u32 a_info; /* Use macros N_MAGIC, etc for access */ + __u32 a_text; /* length of text, in bytes */ + __u32 a_data; /* length of data, in bytes */ + __u32 a_bss; /* length of uninitialized data area for file, in bytes */ + __u32 a_syms; /* length of symbol table data in file, in bytes */ + __u32 a_entry; /* start address */ + __u32 a_trsize; /* length of relocation info for text, in bytes */ + __u32 a_drsize; /* length of relocation info for data, in bytes */ +}; + +/* + * This is always the same + */ +#define N_TXTADDR(a) (0x00008000) + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#define M_ARM 103 + +#ifndef LIBRARY_START_TEXT +#define LIBRARY_START_TEXT (0x00c00000) +#endif + +#endif /* __A_OUT_GNU_H__ */ diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h new file mode 100644 index 000000000000..6116e4893c0a --- /dev/null +++ b/arch/arm/include/asm/assembler.h @@ -0,0 +1,116 @@ +/* + * arch/arm/include/asm/assembler.h + * + * Copyright (C) 1996-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains arm architecture specific defines + * for the different processors. + * + * Do not include any C declarations in this file - it is included by + * assembler source. + */ +#ifndef __ASSEMBLY__ +#error "Only include this from assembly code" +#endif + +#include + +/* + * Endian independent macros for shifting bytes within registers. + */ +#ifndef __ARMEB__ +#define pull lsr +#define push lsl +#define get_byte_0 lsl #0 +#define get_byte_1 lsr #8 +#define get_byte_2 lsr #16 +#define get_byte_3 lsr #24 +#define put_byte_0 lsl #0 +#define put_byte_1 lsl #8 +#define put_byte_2 lsl #16 +#define put_byte_3 lsl #24 +#else +#define pull lsl +#define push lsr +#define get_byte_0 lsr #24 +#define get_byte_1 lsr #16 +#define get_byte_2 lsr #8 +#define get_byte_3 lsl #0 +#define put_byte_0 lsl #24 +#define put_byte_1 lsl #16 +#define put_byte_2 lsl #8 +#define put_byte_3 lsl #0 +#endif + +/* + * Data preload for architectures that support it + */ +#if __LINUX_ARM_ARCH__ >= 5 +#define PLD(code...) code +#else +#define PLD(code...) +#endif + +/* + * This can be used to enable code to cacheline align the destination + * pointer when bulk writing to memory. Experiments on StrongARM and + * XScale didn't show this a worthwhile thing to do when the cache is not + * set to write-allocate (this would need further testing on XScale when WA + * is used). + * + * On Feroceon there is much to gain however, regardless of cache mode. + */ +#ifdef CONFIG_CPU_FEROCEON +#define CALGN(code...) code +#else +#define CALGN(code...) +#endif + +/* + * Enable and disable interrupts + */ +#if __LINUX_ARM_ARCH__ >= 6 + .macro disable_irq + cpsid i + .endm + + .macro enable_irq + cpsie i + .endm +#else + .macro disable_irq + msr cpsr_c, #PSR_I_BIT | SVC_MODE + .endm + + .macro enable_irq + msr cpsr_c, #SVC_MODE + .endm +#endif + +/* + * Save the current IRQ state and disable IRQs. Note that this macro + * assumes FIQs are enabled, and that the processor is in SVC mode. + */ + .macro save_and_disable_irqs, oldcpsr + mrs \oldcpsr, cpsr + disable_irq + .endm + +/* + * Restore interrupt state previously stored in a register. We don't + * guarantee that this will preserve the flags. + */ + .macro restore_irqs, oldcpsr + msr cpsr_c, \oldcpsr + .endm + +#define USER(x...) \ +9999: x; \ + .section __ex_table,"a"; \ + .align 3; \ + .long 9999b,9001f; \ + .previous diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h new file mode 100644 index 000000000000..325f881ccb50 --- /dev/null +++ b/arch/arm/include/asm/atomic.h @@ -0,0 +1,212 @@ +/* + * arch/arm/include/asm/atomic.h + * + * Copyright (C) 1996 Russell King. + * Copyright (C) 2002 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_ATOMIC_H +#define __ASM_ARM_ATOMIC_H + +#include +#include + +typedef struct { volatile int counter; } atomic_t; + +#define ATOMIC_INIT(i) { (i) } + +#ifdef __KERNEL__ + +#define atomic_read(v) ((v)->counter) + +#if __LINUX_ARM_ARCH__ >= 6 + +/* + * ARMv6 UP and SMP safe atomic ops. We use load exclusive and + * store exclusive to ensure that these are atomic. We may loop + * to ensure that the update happens. Writing to 'v->counter' + * without using the following operations WILL break the atomic + * nature of these ops. + */ +static inline void atomic_set(atomic_t *v, int i) +{ + unsigned long tmp; + + __asm__ __volatile__("@ atomic_set\n" +"1: ldrex %0, [%1]\n" +" strex %0, %2, [%1]\n" +" teq %0, #0\n" +" bne 1b" + : "=&r" (tmp) + : "r" (&v->counter), "r" (i) + : "cc"); +} + +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long tmp; + int result; + + __asm__ __volatile__("@ atomic_add_return\n" +"1: ldrex %0, [%2]\n" +" add %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (result), "=&r" (tmp) + : "r" (&v->counter), "Ir" (i) + : "cc"); + + return result; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long tmp; + int result; + + __asm__ __volatile__("@ atomic_sub_return\n" +"1: ldrex %0, [%2]\n" +" sub %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (result), "=&r" (tmp) + : "r" (&v->counter), "Ir" (i) + : "cc"); + + return result; +} + +static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) +{ + unsigned long oldval, res; + + do { + __asm__ __volatile__("@ atomic_cmpxchg\n" + "ldrex %1, [%2]\n" + "mov %0, #0\n" + "teq %1, %3\n" + "strexeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (&ptr->counter), "Ir" (old), "r" (new) + : "cc"); + } while (res); + + return oldval; +} + +static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) +{ + unsigned long tmp, tmp2; + + __asm__ __volatile__("@ atomic_clear_mask\n" +"1: ldrex %0, [%2]\n" +" bic %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (tmp), "=&r" (tmp2) + : "r" (addr), "Ir" (mask) + : "cc"); +} + +#else /* ARM_ARCH_6 */ + +#include + +#ifdef CONFIG_SMP +#error SMP not supported on pre-ARMv6 CPUs +#endif + +#define atomic_set(v,i) (((v)->counter) = (i)) + +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long flags; + int val; + + raw_local_irq_save(flags); + val = v->counter; + v->counter = val += i; + raw_local_irq_restore(flags); + + return val; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long flags; + int val; + + raw_local_irq_save(flags); + val = v->counter; + v->counter = val -= i; + raw_local_irq_restore(flags); + + return val; +} + +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + raw_local_irq_save(flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + raw_local_irq_restore(flags); + + return ret; +} + +static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) +{ + unsigned long flags; + + raw_local_irq_save(flags); + *addr &= ~mask; + raw_local_irq_restore(flags); +} + +#endif /* __LINUX_ARM_ARCH__ */ + +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + + c = atomic_read(v); + while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c) + c = old; + return c != u; +} +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +#define atomic_add(i, v) (void) atomic_add_return(i, v) +#define atomic_inc(v) (void) atomic_add_return(1, v) +#define atomic_sub(i, v) (void) atomic_sub_return(i, v) +#define atomic_dec(v) (void) atomic_sub_return(1, v) + +#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0) +#define atomic_inc_return(v) (atomic_add_return(1, v)) +#define atomic_dec_return(v) (atomic_sub_return(1, v)) +#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0) + +#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0) + +/* Atomic operations are already serializing on ARM */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include +#endif +#endif diff --git a/arch/arm/include/asm/auxvec.h b/arch/arm/include/asm/auxvec.h new file mode 100644 index 000000000000..c0536f6b29a7 --- /dev/null +++ b/arch/arm/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __ASMARM_AUXVEC_H +#define __ASMARM_AUXVEC_H + +#endif diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h new file mode 100644 index 000000000000..9a1db20e032a --- /dev/null +++ b/arch/arm/include/asm/bitops.h @@ -0,0 +1,340 @@ +/* + * Copyright 1995, Russell King. + * Various bits and pieces copyrights include: + * Linus Torvalds (test_bit). + * Big endian support: Copyright 2001, Nicolas Pitre + * reworked by rmk. + * + * bit 0 is the LSB of an "unsigned long" quantity. + * + * Please note that the code in this file should never be included + * from user space. Many of these are not implemented in assembler + * since they would be too costly. Also, they require privileged + * instructions (which are not available from user mode) to ensure + * that they are atomic. + */ + +#ifndef __ASM_ARM_BITOPS_H +#define __ASM_ARM_BITOPS_H + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#include +#include + +#define smp_mb__before_clear_bit() mb() +#define smp_mb__after_clear_bit() mb() + +/* + * These functions are the basis of our bit ops. + * + * First, the atomic bitops. These use native endian. + */ +static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + raw_local_irq_save(flags); + *p |= mask; + raw_local_irq_restore(flags); +} + +static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + raw_local_irq_save(flags); + *p &= ~mask; + raw_local_irq_restore(flags); +} + +static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + raw_local_irq_save(flags); + *p ^= mask; + raw_local_irq_restore(flags); +} + +static inline int +____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned int res; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + raw_local_irq_save(flags); + res = *p; + *p = res | mask; + raw_local_irq_restore(flags); + + return res & mask; +} + +static inline int +____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned int res; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + raw_local_irq_save(flags); + res = *p; + *p = res & ~mask; + raw_local_irq_restore(flags); + + return res & mask; +} + +static inline int +____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned int res; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + raw_local_irq_save(flags); + res = *p; + *p = res ^ mask; + raw_local_irq_restore(flags); + + return res & mask; +} + +#include + +/* + * A note about Endian-ness. + * ------------------------- + * + * When the ARM is put into big endian mode via CR15, the processor + * merely swaps the order of bytes within words, thus: + * + * ------------ physical data bus bits ----------- + * D31 ... D24 D23 ... D16 D15 ... D8 D7 ... D0 + * little byte 3 byte 2 byte 1 byte 0 + * big byte 0 byte 1 byte 2 byte 3 + * + * This means that reading a 32-bit word at address 0 returns the same + * value irrespective of the endian mode bit. + * + * Peripheral devices should be connected with the data bus reversed in + * "Big Endian" mode. ARM Application Note 61 is applicable, and is + * available from http://www.arm.com/. + * + * The following assumes that the data bus connectivity for big endian + * mode has been followed. + * + * Note that bit 0 is defined to be 32-bit word bit 0, not byte 0 bit 0. + */ + +/* + * Little endian assembly bitops. nr = 0 -> byte 0 bit 0. + */ +extern void _set_bit_le(int nr, volatile unsigned long * p); +extern void _clear_bit_le(int nr, volatile unsigned long * p); +extern void _change_bit_le(int nr, volatile unsigned long * p); +extern int _test_and_set_bit_le(int nr, volatile unsigned long * p); +extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p); +extern int _test_and_change_bit_le(int nr, volatile unsigned long * p); +extern int _find_first_zero_bit_le(const void * p, unsigned size); +extern int _find_next_zero_bit_le(const void * p, int size, int offset); +extern int _find_first_bit_le(const unsigned long *p, unsigned size); +extern int _find_next_bit_le(const unsigned long *p, int size, int offset); + +/* + * Big endian assembly bitops. nr = 0 -> byte 3 bit 0. + */ +extern void _set_bit_be(int nr, volatile unsigned long * p); +extern void _clear_bit_be(int nr, volatile unsigned long * p); +extern void _change_bit_be(int nr, volatile unsigned long * p); +extern int _test_and_set_bit_be(int nr, volatile unsigned long * p); +extern int _test_and_clear_bit_be(int nr, volatile unsigned long * p); +extern int _test_and_change_bit_be(int nr, volatile unsigned long * p); +extern int _find_first_zero_bit_be(const void * p, unsigned size); +extern int _find_next_zero_bit_be(const void * p, int size, int offset); +extern int _find_first_bit_be(const unsigned long *p, unsigned size); +extern int _find_next_bit_be(const unsigned long *p, int size, int offset); + +#ifndef CONFIG_SMP +/* + * The __* form of bitops are non-atomic and may be reordered. + */ +#define ATOMIC_BITOP_LE(name,nr,p) \ + (__builtin_constant_p(nr) ? \ + ____atomic_##name(nr, p) : \ + _##name##_le(nr,p)) + +#define ATOMIC_BITOP_BE(name,nr,p) \ + (__builtin_constant_p(nr) ? \ + ____atomic_##name(nr, p) : \ + _##name##_be(nr,p)) +#else +#define ATOMIC_BITOP_LE(name,nr,p) _##name##_le(nr,p) +#define ATOMIC_BITOP_BE(name,nr,p) _##name##_be(nr,p) +#endif + +#define NONATOMIC_BITOP(name,nr,p) \ + (____nonatomic_##name(nr, p)) + +#ifndef __ARMEB__ +/* + * These are the little endian, atomic definitions. + */ +#define set_bit(nr,p) ATOMIC_BITOP_LE(set_bit,nr,p) +#define clear_bit(nr,p) ATOMIC_BITOP_LE(clear_bit,nr,p) +#define change_bit(nr,p) ATOMIC_BITOP_LE(change_bit,nr,p) +#define test_and_set_bit(nr,p) ATOMIC_BITOP_LE(test_and_set_bit,nr,p) +#define test_and_clear_bit(nr,p) ATOMIC_BITOP_LE(test_and_clear_bit,nr,p) +#define test_and_change_bit(nr,p) ATOMIC_BITOP_LE(test_and_change_bit,nr,p) +#define find_first_zero_bit(p,sz) _find_first_zero_bit_le(p,sz) +#define find_next_zero_bit(p,sz,off) _find_next_zero_bit_le(p,sz,off) +#define find_first_bit(p,sz) _find_first_bit_le(p,sz) +#define find_next_bit(p,sz,off) _find_next_bit_le(p,sz,off) + +#define WORD_BITOFF_TO_LE(x) ((x)) + +#else + +/* + * These are the big endian, atomic definitions. + */ +#define set_bit(nr,p) ATOMIC_BITOP_BE(set_bit,nr,p) +#define clear_bit(nr,p) ATOMIC_BITOP_BE(clear_bit,nr,p) +#define change_bit(nr,p) ATOMIC_BITOP_BE(change_bit,nr,p) +#define test_and_set_bit(nr,p) ATOMIC_BITOP_BE(test_and_set_bit,nr,p) +#define test_and_clear_bit(nr,p) ATOMIC_BITOP_BE(test_and_clear_bit,nr,p) +#define test_and_change_bit(nr,p) ATOMIC_BITOP_BE(test_and_change_bit,nr,p) +#define find_first_zero_bit(p,sz) _find_first_zero_bit_be(p,sz) +#define find_next_zero_bit(p,sz,off) _find_next_zero_bit_be(p,sz,off) +#define find_first_bit(p,sz) _find_first_bit_be(p,sz) +#define find_next_bit(p,sz,off) _find_next_bit_be(p,sz,off) + +#define WORD_BITOFF_TO_LE(x) ((x) ^ 0x18) + +#endif + +#if __LINUX_ARM_ARCH__ < 5 + +#include +#include +#include +#include + +#else + +static inline int constant_fls(int x) +{ + int r = 32; + + if (!x) + return 0; + if (!(x & 0xffff0000u)) { + x <<= 16; + r -= 16; + } + if (!(x & 0xff000000u)) { + x <<= 8; + r -= 8; + } + if (!(x & 0xf0000000u)) { + x <<= 4; + r -= 4; + } + if (!(x & 0xc0000000u)) { + x <<= 2; + r -= 2; + } + if (!(x & 0x80000000u)) { + x <<= 1; + r -= 1; + } + return r; +} + +/* + * On ARMv5 and above those functions can be implemented around + * the clz instruction for much better code efficiency. + */ + +#define __fls(x) \ + ( __builtin_constant_p(x) ? constant_fls(x) : \ + ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) ) + +/* Implement fls() in C so that 64-bit args are suitably truncated */ +static inline int fls(int x) +{ + return __fls(x); +} + +#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); }) +#define __ffs(x) (ffs(x) - 1) +#define ffz(x) __ffs( ~(x) ) + +#endif + +#include + +#include +#include +#include + +/* + * Ext2 is defined to use little-endian byte ordering. + * These do not need to be atomic. + */ +#define ext2_set_bit(nr,p) \ + __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define ext2_set_bit_atomic(lock,nr,p) \ + test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define ext2_clear_bit(nr,p) \ + __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define ext2_clear_bit_atomic(lock,nr,p) \ + test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define ext2_test_bit(nr,p) \ + test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define ext2_find_first_zero_bit(p,sz) \ + _find_first_zero_bit_le(p,sz) +#define ext2_find_next_zero_bit(p,sz,off) \ + _find_next_zero_bit_le(p,sz,off) +#define ext2_find_next_bit(p, sz, off) \ + _find_next_bit_le(p, sz, off) + +/* + * Minix is defined to use little-endian byte ordering. + * These do not need to be atomic. + */ +#define minix_set_bit(nr,p) \ + __set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define minix_test_bit(nr,p) \ + test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define minix_test_and_set_bit(nr,p) \ + __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define minix_test_and_clear_bit(nr,p) \ + __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define minix_find_first_zero_bit(p,sz) \ + _find_first_zero_bit_le(p,sz) + +#endif /* __KERNEL__ */ + +#endif /* _ARM_BITOPS_H */ diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h new file mode 100644 index 000000000000..7b62351f097d --- /dev/null +++ b/arch/arm/include/asm/bug.h @@ -0,0 +1,24 @@ +#ifndef _ASMARM_BUG_H +#define _ASMARM_BUG_H + + +#ifdef CONFIG_BUG +#ifdef CONFIG_DEBUG_BUGVERBOSE +extern void __bug(const char *file, int line) __attribute__((noreturn)); + +/* give file/line information */ +#define BUG() __bug(__FILE__, __LINE__) + +#else + +/* this just causes an oops */ +#define BUG() (*(int *)0 = 0) + +#endif + +#define HAVE_ARCH_BUG +#endif + +#include + +#endif diff --git a/arch/arm/include/asm/bugs.h b/arch/arm/include/asm/bugs.h new file mode 100644 index 000000000000..a97f1ea708d1 --- /dev/null +++ b/arch/arm/include/asm/bugs.h @@ -0,0 +1,21 @@ +/* + * arch/arm/include/asm/bugs.h + * + * Copyright (C) 1995-2003 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_BUGS_H +#define __ASM_BUGS_H + +#ifdef CONFIG_MMU +extern void check_writebuffer_bugs(void); + +#define check_bugs() check_writebuffer_bugs() +#else +#define check_bugs() do { } while (0) +#endif + +#endif diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h new file mode 100644 index 000000000000..4fbfb22f65a0 --- /dev/null +++ b/arch/arm/include/asm/byteorder.h @@ -0,0 +1,58 @@ +/* + * arch/arm/include/asm/byteorder.h + * + * ARM Endian-ness. In little endian mode, the data bus is connected such + * that byte accesses appear as: + * 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31 + * and word accesses (data or instruction) appear as: + * d0...d31 + * + * When in big endian mode, byte accesses appear as: + * 0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7 + * and word accesses (data or instruction) appear as: + * d0...d31 + */ +#ifndef __ASM_ARM_BYTEORDER_H +#define __ASM_ARM_BYTEORDER_H + +#include +#include + +static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) +{ + __u32 t; + +#ifndef __thumb__ + if (!__builtin_constant_p(x)) { + /* + * The compiler needs a bit of a hint here to always do the + * right thing and not screw it up to different degrees + * depending on the gcc version. + */ + asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x)); + } else +#endif + t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ + + x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */ + t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */ + x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */ + + return x; +} + +#define __arch__swab32(x) ___arch__swab32(x) + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#ifdef __ARMEB__ +#include +#else +#include +#endif + +#endif + diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h new file mode 100644 index 000000000000..cb7a9e97fd7e --- /dev/null +++ b/arch/arm/include/asm/cache.h @@ -0,0 +1,10 @@ +/* + * arch/arm/include/asm/cache.h + */ +#ifndef __ASMARM_CACHE_H +#define __ASMARM_CACHE_H + +#define L1_CACHE_SHIFT 5 +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#endif diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h new file mode 100644 index 000000000000..9073d9c6567e --- /dev/null +++ b/arch/arm/include/asm/cacheflush.h @@ -0,0 +1,537 @@ +/* + * arch/arm/include/asm/cacheflush.h + * + * Copyright (C) 1999-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_CACHEFLUSH_H +#define _ASMARM_CACHEFLUSH_H + +#include +#include + +#include +#include + +#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) + +/* + * Cache Model + * =========== + */ +#undef _CACHE +#undef MULTI_CACHE + +#if defined(CONFIG_CPU_CACHE_V3) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE v3 +# endif +#endif + +#if defined(CONFIG_CPU_CACHE_V4) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE v4 +# endif +#endif + +#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \ + defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) +# define MULTI_CACHE 1 +#endif + +#if defined(CONFIG_CPU_ARM926T) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE arm926 +# endif +#endif + +#if defined(CONFIG_CPU_ARM940T) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE arm940 +# endif +#endif + +#if defined(CONFIG_CPU_ARM946E) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE arm946 +# endif +#endif + +#if defined(CONFIG_CPU_CACHE_V4WB) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE v4wb +# endif +#endif + +#if defined(CONFIG_CPU_XSCALE) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE xscale +# endif +#endif + +#if defined(CONFIG_CPU_XSC3) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE xsc3 +# endif +#endif + +#if defined(CONFIG_CPU_FEROCEON) +# define MULTI_CACHE 1 +#endif + +#if defined(CONFIG_CPU_V6) +//# ifdef _CACHE +# define MULTI_CACHE 1 +//# else +//# define _CACHE v6 +//# endif +#endif + +#if defined(CONFIG_CPU_V7) +//# ifdef _CACHE +# define MULTI_CACHE 1 +//# else +//# define _CACHE v7 +//# endif +#endif + +#if !defined(_CACHE) && !defined(MULTI_CACHE) +#error Unknown cache maintainence model +#endif + +/* + * This flag is used to indicate that the page pointed to by a pte + * is dirty and requires cleaning before returning it to the user. + */ +#define PG_dcache_dirty PG_arch_1 + +/* + * MM Cache Management + * =================== + * + * The arch/arm/mm/cache-*.S and arch/arm/mm/proc-*.S files + * implement these methods. + * + * Start addresses are inclusive and end addresses are exclusive; + * start addresses should be rounded down, end addresses up. + * + * See Documentation/cachetlb.txt for more information. + * Please note that the implementation of these, and the required + * effects are cache-type (VIVT/VIPT/PIPT) specific. + * + * flush_cache_kern_all() + * + * Unconditionally clean and invalidate the entire cache. + * + * flush_cache_user_mm(mm) + * + * Clean and invalidate all user space cache entries + * before a change of page tables. + * + * flush_cache_user_range(start, end, flags) + * + * Clean and invalidate a range of cache entries in the + * specified address space before a change of page tables. + * - start - user start address (inclusive, page aligned) + * - end - user end address (exclusive, page aligned) + * - flags - vma->vm_flags field + * + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * - start - virtual start address + * - end - virtual end address + * + * DMA Cache Coherency + * =================== + * + * dma_inv_range(start, end) + * + * Invalidate (discard) the specified virtual address range. + * May not write back any entries. If 'start' or 'end' + * are not cache line aligned, those lines must be written + * back. + * - start - virtual start address + * - end - virtual end address + * + * dma_clean_range(start, end) + * + * Clean (write back) the specified virtual address range. + * - start - virtual start address + * - end - virtual end address + * + * dma_flush_range(start, end) + * + * Clean and invalidate the specified virtual address range. + * - start - virtual start address + * - end - virtual end address + */ + +struct cpu_cache_fns { + void (*flush_kern_all)(void); + void (*flush_user_all)(void); + void (*flush_user_range)(unsigned long, unsigned long, unsigned int); + + void (*coherent_kern_range)(unsigned long, unsigned long); + void (*coherent_user_range)(unsigned long, unsigned long); + void (*flush_kern_dcache_page)(void *); + + void (*dma_inv_range)(const void *, const void *); + void (*dma_clean_range)(const void *, const void *); + void (*dma_flush_range)(const void *, const void *); +}; + +struct outer_cache_fns { + void (*inv_range)(unsigned long, unsigned long); + void (*clean_range)(unsigned long, unsigned long); + void (*flush_range)(unsigned long, unsigned long); +}; + +/* + * Select the calling method + */ +#ifdef MULTI_CACHE + +extern struct cpu_cache_fns cpu_cache; + +#define __cpuc_flush_kern_all cpu_cache.flush_kern_all +#define __cpuc_flush_user_all cpu_cache.flush_user_all +#define __cpuc_flush_user_range cpu_cache.flush_user_range +#define __cpuc_coherent_kern_range cpu_cache.coherent_kern_range +#define __cpuc_coherent_user_range cpu_cache.coherent_user_range +#define __cpuc_flush_dcache_page cpu_cache.flush_kern_dcache_page + +/* + * These are private to the dma-mapping API. Do not use directly. + * Their sole purpose is to ensure that data held in the cache + * is visible to DMA, or data written by DMA to system memory is + * visible to the CPU. + */ +#define dmac_inv_range cpu_cache.dma_inv_range +#define dmac_clean_range cpu_cache.dma_clean_range +#define dmac_flush_range cpu_cache.dma_flush_range + +#else + +#define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all) +#define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all) +#define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) +#define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) +#define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) +#define __cpuc_flush_dcache_page __glue(_CACHE,_flush_kern_dcache_page) + +extern void __cpuc_flush_kern_all(void); +extern void __cpuc_flush_user_all(void); +extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int); +extern void __cpuc_coherent_kern_range(unsigned long, unsigned long); +extern void __cpuc_coherent_user_range(unsigned long, unsigned long); +extern void __cpuc_flush_dcache_page(void *); + +/* + * These are private to the dma-mapping API. Do not use directly. + * Their sole purpose is to ensure that data held in the cache + * is visible to DMA, or data written by DMA to system memory is + * visible to the CPU. + */ +#define dmac_inv_range __glue(_CACHE,_dma_inv_range) +#define dmac_clean_range __glue(_CACHE,_dma_clean_range) +#define dmac_flush_range __glue(_CACHE,_dma_flush_range) + +extern void dmac_inv_range(const void *, const void *); +extern void dmac_clean_range(const void *, const void *); +extern void dmac_flush_range(const void *, const void *); + +#endif + +#ifdef CONFIG_OUTER_CACHE + +extern struct outer_cache_fns outer_cache; + +static inline void outer_inv_range(unsigned long start, unsigned long end) +{ + if (outer_cache.inv_range) + outer_cache.inv_range(start, end); +} +static inline void outer_clean_range(unsigned long start, unsigned long end) +{ + if (outer_cache.clean_range) + outer_cache.clean_range(start, end); +} +static inline void outer_flush_range(unsigned long start, unsigned long end) +{ + if (outer_cache.flush_range) + outer_cache.flush_range(start, end); +} + +#else + +static inline void outer_inv_range(unsigned long start, unsigned long end) +{ } +static inline void outer_clean_range(unsigned long start, unsigned long end) +{ } +static inline void outer_flush_range(unsigned long start, unsigned long end) +{ } + +#endif + +/* + * flush_cache_vmap() is used when creating mappings (eg, via vmap, + * vmalloc, ioremap etc) in kernel space for pages. Since the + * direct-mappings of these pages may contain cached data, we need + * to do a full cache flush to ensure that writebacks don't corrupt + * data placed into these pages via the new mappings. + */ +#define flush_cache_vmap(start, end) flush_cache_all() +#define flush_cache_vunmap(start, end) flush_cache_all() + +/* + * Copy user data from/to a page which is mapped into a different + * processes address space. Really, we want to allow our "user + * space" model to handle this. + */ +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + memcpy(dst, src, len); \ + flush_ptrace_access(vma, page, vaddr, dst, len, 1);\ + } while (0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + memcpy(dst, src, len); \ + } while (0) + +/* + * Convert calls to our calling convention. + */ +#define flush_cache_all() __cpuc_flush_kern_all() +#ifndef CONFIG_CPU_CACHE_VIPT +static inline void flush_cache_mm(struct mm_struct *mm) +{ + if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) + __cpuc_flush_user_all(); +} + +static inline void +flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) +{ + if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) + __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end), + vma->vm_flags); +} + +static inline void +flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) +{ + if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { + unsigned long addr = user_addr & PAGE_MASK; + __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags); + } +} + +static inline void +flush_ptrace_access(struct vm_area_struct *vma, struct page *page, + unsigned long uaddr, void *kaddr, + unsigned long len, int write) +{ + if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { + unsigned long addr = (unsigned long)kaddr; + __cpuc_coherent_kern_range(addr, addr + len); + } +} +#else +extern void flush_cache_mm(struct mm_struct *mm); +extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); +extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn); +extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, + unsigned long uaddr, void *kaddr, + unsigned long len, int write); +#endif + +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) + +/* + * flush_cache_user_range is used when we want to ensure that the + * Harvard caches are synchronised for the user space address range. + * This is used for the ARM private sys_cacheflush system call. + */ +#define flush_cache_user_range(vma,start,end) \ + __cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end)) + +/* + * Perform necessary cache operations to ensure that data previously + * stored within this range of addresses can be executed by the CPU. + */ +#define flush_icache_range(s,e) __cpuc_coherent_kern_range(s,e) + +/* + * Perform necessary cache operations to ensure that the TLB will + * see data written in the specified area. + */ +#define clean_dcache_area(start,size) cpu_dcache_clean_area(start, size) + +/* + * flush_dcache_page is used when the kernel has written to the page + * cache page at virtual address page->virtual. + * + * If this page isn't mapped (ie, page_mapping == NULL), or it might + * have userspace mappings, then we _must_ always clean + invalidate + * the dcache entries associated with the kernel mapping. + * + * Otherwise we can defer the operation, and clean the cache when we are + * about to change to user space. This is the same method as used on SPARC64. + * See update_mmu_cache for the user space part. + */ +extern void flush_dcache_page(struct page *); + +extern void __flush_dcache_page(struct address_space *mapping, struct page *page); + +static inline void __flush_icache_all(void) +{ + asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n" + : + : "r" (0)); +} + +#define ARCH_HAS_FLUSH_ANON_PAGE +static inline void flush_anon_page(struct vm_area_struct *vma, + struct page *page, unsigned long vmaddr) +{ + extern void __flush_anon_page(struct vm_area_struct *vma, + struct page *, unsigned long); + if (PageAnon(page)) + __flush_anon_page(vma, page, vmaddr); +} + +#define flush_dcache_mmap_lock(mapping) \ + spin_lock_irq(&(mapping)->tree_lock) +#define flush_dcache_mmap_unlock(mapping) \ + spin_unlock_irq(&(mapping)->tree_lock) + +#define flush_icache_user_range(vma,page,addr,len) \ + flush_dcache_page(page) + +/* + * We don't appear to need to do anything here. In fact, if we did, we'd + * duplicate cache flushing elsewhere performed by flush_dcache_page(). + */ +#define flush_icache_page(vma,page) do { } while (0) + +static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt, + unsigned offset, size_t size) +{ + const void *start = (void __force *)virt + offset; + dmac_inv_range(start, start + size); +} + +#define __cacheid_present(val) (val != read_cpuid(CPUID_ID)) +#define __cacheid_type_v7(val) ((val & (7 << 29)) == (4 << 29)) + +#define __cacheid_vivt_prev7(val) ((val & (15 << 25)) != (14 << 25)) +#define __cacheid_vipt_prev7(val) ((val & (15 << 25)) == (14 << 25)) +#define __cacheid_vipt_nonaliasing_prev7(val) ((val & (15 << 25 | 1 << 23)) == (14 << 25)) +#define __cacheid_vipt_aliasing_prev7(val) ((val & (15 << 25 | 1 << 23)) == (14 << 25 | 1 << 23)) + +#define __cacheid_vivt(val) (__cacheid_type_v7(val) ? 0 : __cacheid_vivt_prev7(val)) +#define __cacheid_vipt(val) (__cacheid_type_v7(val) ? 1 : __cacheid_vipt_prev7(val)) +#define __cacheid_vipt_nonaliasing(val) (__cacheid_type_v7(val) ? 1 : __cacheid_vipt_nonaliasing_prev7(val)) +#define __cacheid_vipt_aliasing(val) (__cacheid_type_v7(val) ? 0 : __cacheid_vipt_aliasing_prev7(val)) +#define __cacheid_vivt_asid_tagged_instr(val) (__cacheid_type_v7(val) ? ((val & (3 << 14)) == (1 << 14)) : 0) + +#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT) +/* + * VIVT caches only + */ +#define cache_is_vivt() 1 +#define cache_is_vipt() 0 +#define cache_is_vipt_nonaliasing() 0 +#define cache_is_vipt_aliasing() 0 +#define icache_is_vivt_asid_tagged() 0 + +#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT) +/* + * VIPT caches only + */ +#define cache_is_vivt() 0 +#define cache_is_vipt() 1 +#define cache_is_vipt_nonaliasing() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + __cacheid_vipt_nonaliasing(__val); \ + }) + +#define cache_is_vipt_aliasing() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + __cacheid_vipt_aliasing(__val); \ + }) + +#define icache_is_vivt_asid_tagged() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + __cacheid_vivt_asid_tagged_instr(__val); \ + }) + +#else +/* + * VIVT or VIPT caches. Note that this is unreliable since ARM926 + * and V6 CPUs satisfy the "(val & (15 << 25)) == (14 << 25)" test. + * There's no way to tell from the CacheType register what type (!) + * the cache is. + */ +#define cache_is_vivt() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + (!__cacheid_present(__val)) || __cacheid_vivt(__val); \ + }) + +#define cache_is_vipt() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + __cacheid_present(__val) && __cacheid_vipt(__val); \ + }) + +#define cache_is_vipt_nonaliasing() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + __cacheid_present(__val) && \ + __cacheid_vipt_nonaliasing(__val); \ + }) + +#define cache_is_vipt_aliasing() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + __cacheid_present(__val) && \ + __cacheid_vipt_aliasing(__val); \ + }) + +#define icache_is_vivt_asid_tagged() \ + ({ \ + unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ + __cacheid_present(__val) && \ + __cacheid_vivt_asid_tagged_instr(__val); \ + }) + +#endif + +#endif diff --git a/arch/arm/include/asm/checksum.h b/arch/arm/include/asm/checksum.h new file mode 100644 index 000000000000..6dcc16430868 --- /dev/null +++ b/arch/arm/include/asm/checksum.h @@ -0,0 +1,139 @@ +/* + * arch/arm/include/asm/checksum.h + * + * IP checksum routines + * + * Copyright (C) Original authors of ../asm-i386/checksum.h + * Copyright (C) 1996-1999 Russell King + */ +#ifndef __ASM_ARM_CHECKSUM_H +#define __ASM_ARM_CHECKSUM_H + +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums, and handles user-space pointer exceptions correctly, when needed. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +__wsum +csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum); + +__wsum +csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr); + +/* + * Fold a partial checksum without adding pseudo headers + */ +static inline __sum16 csum_fold(__wsum sum) +{ + __asm__( + "add %0, %1, %1, ror #16 @ csum_fold" + : "=r" (sum) + : "r" (sum) + : "cc"); + return (__force __sum16)(~(__force u32)sum >> 16); +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +static inline __sum16 +ip_fast_csum(const void *iph, unsigned int ihl) +{ + unsigned int tmp1; + __wsum sum; + + __asm__ __volatile__( + "ldr %0, [%1], #4 @ ip_fast_csum \n\ + ldr %3, [%1], #4 \n\ + sub %2, %2, #5 \n\ + adds %0, %0, %3 \n\ + ldr %3, [%1], #4 \n\ + adcs %0, %0, %3 \n\ + ldr %3, [%1], #4 \n\ +1: adcs %0, %0, %3 \n\ + ldr %3, [%1], #4 \n\ + tst %2, #15 @ do this carefully \n\ + subne %2, %2, #1 @ without destroying \n\ + bne 1b @ the carry flag \n\ + adcs %0, %0, %3 \n\ + adc %0, %0, #0" + : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1) + : "1" (iph), "2" (ihl) + : "cc", "memory"); + return csum_fold(sum); +} + +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + __asm__( + "adds %0, %1, %2 @ csum_tcpudp_nofold \n\ + adcs %0, %0, %3 \n" +#ifdef __ARMEB__ + "adcs %0, %0, %4 \n" +#else + "adcs %0, %0, %4, lsl #8 \n" +#endif + "adcs %0, %0, %5 \n\ + adc %0, %0, #0" + : "=&r"(sum) + : "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto)) + : "cc"); + return sum; +} +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 +csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); +} + + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 +ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +extern __wsum +__csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __be32 len, + __be32 proto, __wsum sum); + +static inline __sum16 +csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len, + unsigned short proto, __wsum sum) +{ + return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len), + htonl(proto), sum)); +} +#endif diff --git a/arch/arm/include/asm/cnt32_to_63.h b/arch/arm/include/asm/cnt32_to_63.h new file mode 100644 index 000000000000..480c873fa746 --- /dev/null +++ b/arch/arm/include/asm/cnt32_to_63.h @@ -0,0 +1,78 @@ +/* + * include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits + * + * Author: Nicolas Pitre + * Created: December 3, 2006 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#ifndef __INCLUDE_CNT32_TO_63_H__ +#define __INCLUDE_CNT32_TO_63_H__ + +#include +#include +#include + +/* + * Prototype: u64 cnt32_to_63(u32 cnt) + * Many hardware clock counters are only 32 bits wide and therefore have + * a relatively short period making wrap-arounds rather frequent. This + * is a problem when implementing sched_clock() for example, where a 64-bit + * non-wrapping monotonic value is expected to be returned. + * + * To overcome that limitation, let's extend a 32-bit counter to 63 bits + * in a completely lock free fashion. Bits 0 to 31 of the clock are provided + * by the hardware while bits 32 to 62 are stored in memory. The top bit in + * memory is used to synchronize with the hardware clock half-period. When + * the top bit of both counters (hardware and in memory) differ then the + * memory is updated with a new value, incrementing it when the hardware + * counter wraps around. + * + * Because a word store in memory is atomic then the incremented value will + * always be in synch with the top bit indicating to any potential concurrent + * reader if the value in memory is up to date or not with regards to the + * needed increment. And any race in updating the value in memory is harmless + * as the same value would simply be stored more than once. + * + * The only restriction for the algorithm to work properly is that this + * code must be executed at least once per each half period of the 32-bit + * counter to properly update the state bit in memory. This is usually not a + * problem in practice, but if it is then a kernel timer could be scheduled + * to manage for this code to be executed often enough. + * + * Note that the top bit (bit 63) in the returned value should be considered + * as garbage. It is not cleared here because callers are likely to use a + * multiplier on the returned value which can get rid of the top bit + * implicitly by making the multiplier even, therefore saving on a runtime + * clear-bit instruction. Otherwise caller must remember to clear the top + * bit explicitly. + */ + +/* this is used only to give gcc a clue about good code generation */ +typedef union { + struct { +#if defined(__LITTLE_ENDIAN) + u32 lo, hi; +#elif defined(__BIG_ENDIAN) + u32 hi, lo; +#endif + }; + u64 val; +} cnt32_to_63_t; + +#define cnt32_to_63(cnt_lo) \ +({ \ + static volatile u32 __m_cnt_hi = 0; \ + cnt32_to_63_t __x; \ + __x.hi = __m_cnt_hi; \ + __x.lo = (cnt_lo); \ + if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \ + __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \ + __x.val; \ +}) + +#endif diff --git a/arch/arm/include/asm/cpu-multi32.h b/arch/arm/include/asm/cpu-multi32.h new file mode 100644 index 000000000000..e2b5b0b2116a --- /dev/null +++ b/arch/arm/include/asm/cpu-multi32.h @@ -0,0 +1,69 @@ +/* + * arch/arm/include/asm/cpu-multi32.h + * + * Copyright (C) 2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + +struct mm_struct; + +/* + * Don't change this structure - ASM code + * relies on it. + */ +extern struct processor { + /* MISC + * get data abort address/flags + */ + void (*_data_abort)(unsigned long pc); + /* + * Retrieve prefetch fault address + */ + unsigned long (*_prefetch_abort)(unsigned long lr); + /* + * Set up any processor specifics + */ + void (*_proc_init)(void); + /* + * Disable any processor specifics + */ + void (*_proc_fin)(void); + /* + * Special stuff for a reset + */ + void (*reset)(unsigned long addr) __attribute__((noreturn)); + /* + * Idle the processor + */ + int (*_do_idle)(void); + /* + * Processor architecture specific + */ + /* + * clean a virtual address range from the + * D-cache without flushing the cache. + */ + void (*dcache_clean_area)(void *addr, int size); + + /* + * Set the page table + */ + void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm); + /* + * Set a possibly extended PTE. Non-extended PTEs should + * ignore 'ext'. + */ + void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext); +} processor; + +#define cpu_proc_init() processor._proc_init() +#define cpu_proc_fin() processor._proc_fin() +#define cpu_reset(addr) processor.reset(addr) +#define cpu_do_idle() processor._do_idle() +#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz) +#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext) +#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm) diff --git a/arch/arm/include/asm/cpu-single.h b/arch/arm/include/asm/cpu-single.h new file mode 100644 index 000000000000..f073a6d2a406 --- /dev/null +++ b/arch/arm/include/asm/cpu-single.h @@ -0,0 +1,44 @@ +/* + * arch/arm/include/asm/cpu-single.h + * + * Copyright (C) 2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/* + * Single CPU + */ +#ifdef __STDC__ +#define __catify_fn(name,x) name##x +#else +#define __catify_fn(name,x) name/**/x +#endif +#define __cpu_fn(name,x) __catify_fn(name,x) + +/* + * If we are supporting multiple CPUs, then we must use a table of + * function pointers for this lot. Otherwise, we can optimise the + * table away. + */ +#define cpu_proc_init __cpu_fn(CPU_NAME,_proc_init) +#define cpu_proc_fin __cpu_fn(CPU_NAME,_proc_fin) +#define cpu_reset __cpu_fn(CPU_NAME,_reset) +#define cpu_do_idle __cpu_fn(CPU_NAME,_do_idle) +#define cpu_dcache_clean_area __cpu_fn(CPU_NAME,_dcache_clean_area) +#define cpu_do_switch_mm __cpu_fn(CPU_NAME,_switch_mm) +#define cpu_set_pte_ext __cpu_fn(CPU_NAME,_set_pte_ext) + +#include + +struct mm_struct; + +/* declare all the functions as extern */ +extern void cpu_proc_init(void); +extern void cpu_proc_fin(void); +extern int cpu_do_idle(void); +extern void cpu_dcache_clean_area(void *, int); +extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); +extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); diff --git a/arch/arm/include/asm/cpu.h b/arch/arm/include/asm/cpu.h new file mode 100644 index 000000000000..634b2d7c612a --- /dev/null +++ b/arch/arm/include/asm/cpu.h @@ -0,0 +1,25 @@ +/* + * arch/arm/include/asm/cpu.h + * + * Copyright (C) 2004-2005 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_CPU_H +#define __ASM_ARM_CPU_H + +#include + +struct cpuinfo_arm { + struct cpu cpu; +#ifdef CONFIG_SMP + struct task_struct *idle; + unsigned int loops_per_jiffy; +#endif +}; + +DECLARE_PER_CPU(struct cpuinfo_arm, cpu_data); + +#endif diff --git a/arch/arm/include/asm/cputime.h b/arch/arm/include/asm/cputime.h new file mode 100644 index 000000000000..3a8002a5fec7 --- /dev/null +++ b/arch/arm/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __ARM_CPUTIME_H +#define __ARM_CPUTIME_H + +#include + +#endif /* __ARM_CPUTIME_H */ diff --git a/arch/arm/include/asm/current.h b/arch/arm/include/asm/current.h new file mode 100644 index 000000000000..75d21e2a3ff7 --- /dev/null +++ b/arch/arm/include/asm/current.h @@ -0,0 +1,15 @@ +#ifndef _ASMARM_CURRENT_H +#define _ASMARM_CURRENT_H + +#include + +static inline struct task_struct *get_current(void) __attribute_const__; + +static inline struct task_struct *get_current(void) +{ + return current_thread_info()->task; +} + +#define current (get_current()) + +#endif /* _ASMARM_CURRENT_H */ diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h new file mode 100644 index 000000000000..b2deda181549 --- /dev/null +++ b/arch/arm/include/asm/delay.h @@ -0,0 +1,44 @@ +/* + * Copyright (C) 1995-2004 Russell King + * + * Delay routines, using a pre-computed "loops_per_second" value. + */ +#ifndef __ASM_ARM_DELAY_H +#define __ASM_ARM_DELAY_H + +#include /* HZ */ + +extern void __delay(int loops); + +/* + * This function intentionally does not exist; if you see references to + * it, it means that you're calling udelay() with an out of range value. + * + * With currently imposed limits, this means that we support a max delay + * of 2000us. Further limits: HZ<=1000 and bogomips<=3355 + */ +extern void __bad_udelay(void); + +/* + * division by multiplication: you don't have to worry about + * loss of precision. + * + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ +extern void __udelay(unsigned long usecs); +extern void __const_udelay(unsigned long); + +#define MAX_UDELAY_MS 2 + +#define udelay(n) \ + (__builtin_constant_p(n) ? \ + ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \ + __const_udelay((n) * ((2199023U*HZ)>>11))) : \ + __udelay(n)) + +#endif /* defined(_ARM_DELAY_H) */ + diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h new file mode 100644 index 000000000000..c61642b40603 --- /dev/null +++ b/arch/arm/include/asm/device.h @@ -0,0 +1,15 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#ifndef ASMARM_DEVICE_H +#define ASMARM_DEVICE_H + +struct dev_archdata { +#ifdef CONFIG_DMABOUNCE + struct dmabounce_device_info *dmabounce; +#endif +}; + +#endif diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h new file mode 100644 index 000000000000..5001390be958 --- /dev/null +++ b/arch/arm/include/asm/div64.h @@ -0,0 +1,227 @@ +#ifndef __ASM_ARM_DIV64 +#define __ASM_ARM_DIV64 + +#include +#include + +/* + * The semantics of do_div() are: + * + * uint32_t do_div(uint64_t *n, uint32_t base) + * { + * uint32_t remainder = *n % base; + * *n = *n / base; + * return remainder; + * } + * + * In other words, a 64-bit dividend with a 32-bit divisor producing + * a 64-bit result and a 32-bit remainder. To accomplish this optimally + * we call a special __do_div64 helper with completely non standard + * calling convention for arguments and results (beware). + */ + +#ifdef __ARMEB__ +#define __xh "r0" +#define __xl "r1" +#else +#define __xl "r0" +#define __xh "r1" +#endif + +#define __do_div_asm(n, base) \ +({ \ + register unsigned int __base asm("r4") = base; \ + register unsigned long long __n asm("r0") = n; \ + register unsigned long long __res asm("r2"); \ + register unsigned int __rem asm(__xh); \ + asm( __asmeq("%0", __xh) \ + __asmeq("%1", "r2") \ + __asmeq("%2", "r0") \ + __asmeq("%3", "r4") \ + "bl __do_div64" \ + : "=r" (__rem), "=r" (__res) \ + : "r" (__n), "r" (__base) \ + : "ip", "lr", "cc"); \ + n = __res; \ + __rem; \ +}) + +#if __GNUC__ < 4 + +/* + * gcc versions earlier than 4.0 are simply too problematic for the + * optimized implementation below. First there is gcc PR 15089 that + * tend to trig on more complex constructs, spurious .global __udivsi3 + * are inserted even if none of those symbols are referenced in the + * generated code, and those gcc versions are not able to do constant + * propagation on long long values anyway. + */ +#define do_div(n, base) __do_div_asm(n, base) + +#elif __GNUC__ >= 4 + +#include + +/* + * If the divisor happens to be constant, we determine the appropriate + * inverse at compile time to turn the division into a few inline + * multiplications instead which is much faster. And yet only if compiling + * for ARMv4 or higher (we need umull/umlal) and if the gcc version is + * sufficiently recent to perform proper long long constant propagation. + * (It is unfortunate that gcc doesn't perform all this internally.) + */ +#define do_div(n, base) \ +({ \ + unsigned int __r, __b = (base); \ + if (!__builtin_constant_p(__b) || __b == 0 || \ + (__LINUX_ARM_ARCH__ < 4 && (__b & (__b - 1)) != 0)) { \ + /* non-constant divisor (or zero): slow path */ \ + __r = __do_div_asm(n, __b); \ + } else if ((__b & (__b - 1)) == 0) { \ + /* Trivial: __b is constant and a power of 2 */ \ + /* gcc does the right thing with this code. */ \ + __r = n; \ + __r &= (__b - 1); \ + n /= __b; \ + } else { \ + /* Multiply by inverse of __b: n/b = n*(p/b)/p */ \ + /* We rely on the fact that most of this code gets */ \ + /* optimized away at compile time due to constant */ \ + /* propagation and only a couple inline assembly */ \ + /* instructions should remain. Better avoid any */ \ + /* code construct that might prevent that. */ \ + unsigned long long __res, __x, __t, __m, __n = n; \ + unsigned int __c, __p, __z = 0; \ + /* preserve low part of n for reminder computation */ \ + __r = __n; \ + /* determine number of bits to represent __b */ \ + __p = 1 << __div64_fls(__b); \ + /* compute __m = ((__p << 64) + __b - 1) / __b */ \ + __m = (~0ULL / __b) * __p; \ + __m += (((~0ULL % __b + 1) * __p) + __b - 1) / __b; \ + /* compute __res = __m*(~0ULL/__b*__b-1)/(__p << 64) */ \ + __x = ~0ULL / __b * __b - 1; \ + __res = (__m & 0xffffffff) * (__x & 0xffffffff); \ + __res >>= 32; \ + __res += (__m & 0xffffffff) * (__x >> 32); \ + __t = __res; \ + __res += (__x & 0xffffffff) * (__m >> 32); \ + __t = (__res < __t) ? (1ULL << 32) : 0; \ + __res = (__res >> 32) + __t; \ + __res += (__m >> 32) * (__x >> 32); \ + __res /= __p; \ + /* Now sanitize and optimize what we've got. */ \ + if (~0ULL % (__b / (__b & -__b)) == 0) { \ + /* those cases can be simplified with: */ \ + __n /= (__b & -__b); \ + __m = ~0ULL / (__b / (__b & -__b)); \ + __p = 1; \ + __c = 1; \ + } else if (__res != __x / __b) { \ + /* We can't get away without a correction */ \ + /* to compensate for bit truncation errors. */ \ + /* To avoid it we'd need an additional bit */ \ + /* to represent __m which would overflow it. */ \ + /* Instead we do m=p/b and n/b=(n*m+m)/p. */ \ + __c = 1; \ + /* Compute __m = (__p << 64) / __b */ \ + __m = (~0ULL / __b) * __p; \ + __m += ((~0ULL % __b + 1) * __p) / __b; \ + } else { \ + /* Reduce __m/__p, and try to clear bit 31 */ \ + /* of __m when possible otherwise that'll */ \ + /* need extra overflow handling later. */ \ + unsigned int __bits = -(__m & -__m); \ + __bits |= __m >> 32; \ + __bits = (~__bits) << 1; \ + /* If __bits == 0 then setting bit 31 is */ \ + /* unavoidable. Simply apply the maximum */ \ + /* possible reduction in that case. */ \ + /* Otherwise the MSB of __bits indicates the */ \ + /* best reduction we should apply. */ \ + if (!__bits) { \ + __p /= (__m & -__m); \ + __m /= (__m & -__m); \ + } else { \ + __p >>= __div64_fls(__bits); \ + __m >>= __div64_fls(__bits); \ + } \ + /* No correction needed. */ \ + __c = 0; \ + } \ + /* Now we have a combination of 2 conditions: */ \ + /* 1) whether or not we need a correction (__c), and */ \ + /* 2) whether or not there might be an overflow in */ \ + /* the cross product (__m & ((1<<63) | (1<<31))) */ \ + /* Select the best insn combination to perform the */ \ + /* actual __m * __n / (__p << 64) operation. */ \ + if (!__c) { \ + asm ( "umull %Q0, %R0, %1, %Q2\n\t" \ + "mov %Q0, #0" \ + : "=&r" (__res) \ + : "r" (__m), "r" (__n) \ + : "cc" ); \ + } else if (!(__m & ((1ULL << 63) | (1ULL << 31)))) { \ + __res = __m; \ + asm ( "umlal %Q0, %R0, %Q1, %Q2\n\t" \ + "mov %Q0, #0" \ + : "+r" (__res) \ + : "r" (__m), "r" (__n) \ + : "cc" ); \ + } else { \ + asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" \ + "cmn %Q0, %Q1\n\t" \ + "adcs %R0, %R0, %R1\n\t" \ + "adc %Q0, %3, #0" \ + : "=&r" (__res) \ + : "r" (__m), "r" (__n), "r" (__z) \ + : "cc" ); \ + } \ + if (!(__m & ((1ULL << 63) | (1ULL << 31)))) { \ + asm ( "umlal %R0, %Q0, %R1, %Q2\n\t" \ + "umlal %R0, %Q0, %Q1, %R2\n\t" \ + "mov %R0, #0\n\t" \ + "umlal %Q0, %R0, %R1, %R2" \ + : "+r" (__res) \ + : "r" (__m), "r" (__n) \ + : "cc" ); \ + } else { \ + asm ( "umlal %R0, %Q0, %R2, %Q3\n\t" \ + "umlal %R0, %1, %Q2, %R3\n\t" \ + "mov %R0, #0\n\t" \ + "adds %Q0, %1, %Q0\n\t" \ + "adc %R0, %R0, #0\n\t" \ + "umlal %Q0, %R0, %R2, %R3" \ + : "+r" (__res), "+r" (__z) \ + : "r" (__m), "r" (__n) \ + : "cc" ); \ + } \ + __res /= __p; \ + /* The reminder can be computed with 32-bit regs */ \ + /* only, and gcc is good at that. */ \ + { \ + unsigned int __res0 = __res; \ + unsigned int __b0 = __b; \ + __r -= __res0 * __b0; \ + } \ + /* BUG_ON(__r >= __b || __res * __b + __r != n); */ \ + n = __res; \ + } \ + __r; \ +}) + +/* our own fls implementation to make sure constant propagation is fine */ +#define __div64_fls(bits) \ +({ \ + unsigned int __left = (bits), __nr = 0; \ + if (__left & 0xffff0000) __nr += 16, __left >>= 16; \ + if (__left & 0x0000ff00) __nr += 8, __left >>= 8; \ + if (__left & 0x000000f0) __nr += 4, __left >>= 4; \ + if (__left & 0x0000000c) __nr += 2, __left >>= 2; \ + if (__left & 0x00000002) __nr += 1; \ + __nr; \ +}) + +#endif + +#endif diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h new file mode 100644 index 000000000000..f41335ba6337 --- /dev/null +++ b/arch/arm/include/asm/dma-mapping.h @@ -0,0 +1,456 @@ +#ifndef ASMARM_DMA_MAPPING_H +#define ASMARM_DMA_MAPPING_H + +#ifdef __KERNEL__ + +#include /* need struct page */ + +#include + +/* + * DMA-consistent mapping functions. These allocate/free a region of + * uncached, unwrite-buffered mapped memory space for use with DMA + * devices. This is the "generic" version. The PCI specific version + * is in pci.h + * + * Note: Drivers should NOT use this function directly, as it will break + * platforms with CONFIG_DMABOUNCE. + * Use the driver DMA support - see dma-mapping.h (dma_sync_*) + */ +extern void dma_cache_maint(const void *kaddr, size_t size, int rw); + +/* + * Return whether the given device DMA address mask can be supported + * properly. For example, if your device can only drive the low 24-bits + * during bus mastering, then you would pass 0x00ffffff as the mask + * to this function. + * + * FIXME: This should really be a platform specific issue - we should + * return false if GFP_DMA allocations may not satisfy the supplied 'mask'. + */ +static inline int dma_supported(struct device *dev, u64 mask) +{ + return dev->dma_mask && *dev->dma_mask != 0; +} + +static inline int dma_set_mask(struct device *dev, u64 dma_mask) +{ + if (!dev->dma_mask || !dma_supported(dev, dma_mask)) + return -EIO; + + *dev->dma_mask = dma_mask; + + return 0; +} + +static inline int dma_get_cache_alignment(void) +{ + return 32; +} + +static inline int dma_is_consistent(struct device *dev, dma_addr_t handle) +{ + return !!arch_is_coherent(); +} + +/* + * DMA errors are defined by all-bits-set in the DMA address. + */ +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return dma_addr == ~0; +} + +/* + * Dummy noncoherent implementation. We don't provide a dma_cache_sync + * function so drivers using this API are highlighted with build warnings. + */ +static inline void * +dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) +{ + return NULL; +} + +static inline void +dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t handle) +{ +} + +/** + * dma_alloc_coherent - allocate consistent memory for DMA + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @size: required memory size + * @handle: bus-specific DMA address + * + * Allocate some uncached, unbuffered memory for a device for + * performing DMA. This function allocates pages, and will + * return the CPU-viewed address, and sets @handle to be the + * device-viewed address. + */ +extern void * +dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp); + +/** + * dma_free_coherent - free memory allocated by dma_alloc_coherent + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @size: size of memory originally requested in dma_alloc_coherent + * @cpu_addr: CPU-view address returned from dma_alloc_coherent + * @handle: device-view address returned from dma_alloc_coherent + * + * Free (and unmap) a DMA buffer previously allocated by + * dma_alloc_coherent(). + * + * References to memory and mappings associated with cpu_addr/handle + * during and after this call executing are illegal. + */ +extern void +dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t handle); + +/** + * dma_mmap_coherent - map a coherent DMA allocation into user space + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @vma: vm_area_struct describing requested user mapping + * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent + * @handle: device-view address returned from dma_alloc_coherent + * @size: size of memory originally requested in dma_alloc_coherent + * + * Map a coherent DMA buffer previously allocated by dma_alloc_coherent + * into user space. The coherent DMA buffer must not be freed by the + * driver until the user space mapping has been released. + */ +int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t handle, size_t size); + + +/** + * dma_alloc_writecombine - allocate writecombining memory for DMA + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @size: required memory size + * @handle: bus-specific DMA address + * + * Allocate some uncached, buffered memory for a device for + * performing DMA. This function allocates pages, and will + * return the CPU-viewed address, and sets @handle to be the + * device-viewed address. + */ +extern void * +dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp); + +#define dma_free_writecombine(dev,size,cpu_addr,handle) \ + dma_free_coherent(dev,size,cpu_addr,handle) + +int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t handle, size_t size); + + +/** + * dma_map_single - map a single buffer for streaming DMA + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @cpu_addr: CPU direct mapped address of buffer + * @size: size of buffer to map + * @dir: DMA transfer direction + * + * Ensure that any data held in the cache is appropriately discarded + * or written back. + * + * The device owns this memory once this call has completed. The CPU + * can regain ownership by calling dma_unmap_single() or + * dma_sync_single_for_cpu(). + */ +#ifndef CONFIG_DMABOUNCE +static inline dma_addr_t +dma_map_single(struct device *dev, void *cpu_addr, size_t size, + enum dma_data_direction dir) +{ + if (!arch_is_coherent()) + dma_cache_maint(cpu_addr, size, dir); + + return virt_to_dma(dev, (unsigned long)cpu_addr); +} +#else +extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction); +#endif + +/** + * dma_map_page - map a portion of a page for streaming DMA + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @page: page that buffer resides in + * @offset: offset into page for start of buffer + * @size: size of buffer to map + * @dir: DMA transfer direction + * + * Ensure that any data held in the cache is appropriately discarded + * or written back. + * + * The device owns this memory once this call has completed. The CPU + * can regain ownership by calling dma_unmap_page() or + * dma_sync_single_for_cpu(). + */ +static inline dma_addr_t +dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ + return dma_map_single(dev, page_address(page) + offset, size, (int)dir); +} + +/** + * dma_unmap_single - unmap a single buffer previously mapped + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @handle: DMA address of buffer + * @size: size of buffer to map + * @dir: DMA transfer direction + * + * Unmap a single streaming mode DMA translation. The handle and size + * must match what was provided in the previous dma_map_single() call. + * All other usages are undefined. + * + * After this call, reads by the CPU to the buffer are guaranteed to see + * whatever the device wrote there. + */ +#ifndef CONFIG_DMABOUNCE +static inline void +dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size, + enum dma_data_direction dir) +{ + /* nothing to do */ +} +#else +extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction); +#endif + +/** + * dma_unmap_page - unmap a buffer previously mapped through dma_map_page() + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @handle: DMA address of buffer + * @size: size of buffer to map + * @dir: DMA transfer direction + * + * Unmap a single streaming mode DMA translation. The handle and size + * must match what was provided in the previous dma_map_single() call. + * All other usages are undefined. + * + * After this call, reads by the CPU to the buffer are guaranteed to see + * whatever the device wrote there. + */ +static inline void +dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size, + enum dma_data_direction dir) +{ + dma_unmap_single(dev, handle, size, (int)dir); +} + +/** + * dma_map_sg - map a set of SG buffers for streaming mode DMA + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @sg: list of buffers + * @nents: number of buffers to map + * @dir: DMA transfer direction + * + * Map a set of buffers described by scatterlist in streaming + * mode for DMA. This is the scatter-gather version of the + * above dma_map_single interface. Here the scatter gather list + * elements are each tagged with the appropriate dma address + * and length. They are obtained via sg_dma_{address,length}(SG). + * + * NOTE: An implementation may be able to use a smaller number of + * DMA address/length pairs than there are SG table elements. + * (for example via virtual mapping capabilities) + * The routine returns the number of addr/length pairs actually + * used, at most nents. + * + * Device ownership issues as mentioned above for dma_map_single are + * the same here. + */ +#ifndef CONFIG_DMABOUNCE +static inline int +dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction dir) +{ + int i; + + for (i = 0; i < nents; i++, sg++) { + char *virt; + + sg->dma_address = page_to_dma(dev, sg_page(sg)) + sg->offset; + virt = sg_virt(sg); + + if (!arch_is_coherent()) + dma_cache_maint(virt, sg->length, dir); + } + + return nents; +} +#else +extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction); +#endif + +/** + * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @sg: list of buffers + * @nents: number of buffers to map + * @dir: DMA transfer direction + * + * Unmap a set of streaming mode DMA translations. + * Again, CPU read rules concerning calls here are the same as for + * dma_unmap_single() above. + */ +#ifndef CONFIG_DMABOUNCE +static inline void +dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction dir) +{ + + /* nothing to do */ +} +#else +extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction); +#endif + + +/** + * dma_sync_single_for_cpu + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @handle: DMA address of buffer + * @size: size of buffer to map + * @dir: DMA transfer direction + * + * Make physical memory consistent for a single streaming mode DMA + * translation after a transfer. + * + * If you perform a dma_map_single() but wish to interrogate the + * buffer using the cpu, yet do not wish to teardown the PCI dma + * mapping, you must call this function before doing so. At the + * next point you give the PCI dma address back to the card, you + * must first the perform a dma_sync_for_device, and then the + * device again owns the buffer. + */ +#ifndef CONFIG_DMABOUNCE +static inline void +dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, + enum dma_data_direction dir) +{ + if (!arch_is_coherent()) + dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir); +} + +static inline void +dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size, + enum dma_data_direction dir) +{ + if (!arch_is_coherent()) + dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir); +} +#else +extern void dma_sync_single_for_cpu(struct device*, dma_addr_t, size_t, enum dma_data_direction); +extern void dma_sync_single_for_device(struct device*, dma_addr_t, size_t, enum dma_data_direction); +#endif + + +/** + * dma_sync_sg_for_cpu + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @sg: list of buffers + * @nents: number of buffers to map + * @dir: DMA transfer direction + * + * Make physical memory consistent for a set of streaming + * mode DMA translations after a transfer. + * + * The same as dma_sync_single_for_* but for a scatter-gather list, + * same rules and usage. + */ +#ifndef CONFIG_DMABOUNCE +static inline void +dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction dir) +{ + int i; + + for (i = 0; i < nents; i++, sg++) { + char *virt = sg_virt(sg); + if (!arch_is_coherent()) + dma_cache_maint(virt, sg->length, dir); + } +} + +static inline void +dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction dir) +{ + int i; + + for (i = 0; i < nents; i++, sg++) { + char *virt = sg_virt(sg); + if (!arch_is_coherent()) + dma_cache_maint(virt, sg->length, dir); + } +} +#else +extern void dma_sync_sg_for_cpu(struct device*, struct scatterlist*, int, enum dma_data_direction); +extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enum dma_data_direction); +#endif + +#ifdef CONFIG_DMABOUNCE +/* + * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic" + * and utilize bounce buffers as needed to work around limited DMA windows. + * + * On the SA-1111, a bug limits DMA to only certain regions of RAM. + * On the IXP425, the PCI inbound window is 64MB (256MB total RAM) + * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM) + * + * The following are helper functions used by the dmabounce subystem + * + */ + +/** + * dmabounce_register_dev + * + * @dev: valid struct device pointer + * @small_buf_size: size of buffers to use with small buffer pool + * @large_buf_size: size of buffers to use with large buffer pool (can be 0) + * + * This function should be called by low-level platform code to register + * a device as requireing DMA buffer bouncing. The function will allocate + * appropriate DMA pools for the device. + * + */ +extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long); + +/** + * dmabounce_unregister_dev + * + * @dev: valid struct device pointer + * + * This function should be called by low-level platform code when device + * that was previously registered with dmabounce_register_dev is removed + * from the system. + * + */ +extern void dmabounce_unregister_dev(struct device *); + +/** + * dma_needs_bounce + * + * @dev: valid struct device pointer + * @dma_handle: dma_handle of unbounced buffer + * @size: size of region being mapped + * + * Platforms that utilize the dmabounce mechanism must implement + * this function. + * + * The dmabounce routines call this function whenever a dma-mapping + * is requested to determine whether a given buffer needs to be bounced + * or not. The function must return 0 if the buffer is OK for + * DMA access and 1 if the buffer needs to be bounced. + * + */ +extern int dma_needs_bounce(struct device*, dma_addr_t, size_t); +#endif /* CONFIG_DMABOUNCE */ + +#endif /* __KERNEL__ */ +#endif diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h new file mode 100644 index 000000000000..9f2c5305c260 --- /dev/null +++ b/arch/arm/include/asm/dma.h @@ -0,0 +1,143 @@ +#ifndef __ASM_ARM_DMA_H +#define __ASM_ARM_DMA_H + +typedef unsigned int dmach_t; + +#include +#include +#include +#include + +/* + * This is the maximum virtual address which can be DMA'd from. + */ +#ifndef MAX_DMA_ADDRESS +#define MAX_DMA_ADDRESS 0xffffffff +#endif + +/* + * DMA modes + */ +typedef unsigned int dmamode_t; + +#define DMA_MODE_MASK 3 + +#define DMA_MODE_READ 0 +#define DMA_MODE_WRITE 1 +#define DMA_MODE_CASCADE 2 +#define DMA_AUTOINIT 4 + +extern spinlock_t dma_spin_lock; + +static inline unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static inline void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + +/* Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + */ +#define clear_dma_ff(channel) + +/* Set only the page register bits of the transfer address. + * + * NOTE: This is an architecture specific function, and should + * be hidden from the drivers + */ +extern void set_dma_page(dmach_t channel, char pagenr); + +/* Request a DMA channel + * + * Some architectures may need to do allocate an interrupt + */ +extern int request_dma(dmach_t channel, const char * device_id); + +/* Free a DMA channel + * + * Some architectures may need to do free an interrupt + */ +extern void free_dma(dmach_t channel); + +/* Enable DMA for this channel + * + * On some architectures, this may have other side effects like + * enabling an interrupt and setting the DMA registers. + */ +extern void enable_dma(dmach_t channel); + +/* Disable DMA for this channel + * + * On some architectures, this may have other side effects like + * disabling an interrupt or whatever. + */ +extern void disable_dma(dmach_t channel); + +/* Test whether the specified channel has an active DMA transfer + */ +extern int dma_channel_active(dmach_t channel); + +/* Set the DMA scatter gather list for this channel + * + * This should not be called if a DMA channel is enabled, + * especially since some DMA architectures don't update the + * DMA address immediately, but defer it to the enable_dma(). + */ +extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg); + +/* Set the DMA address for this channel + * + * This should not be called if a DMA channel is enabled, + * especially since some DMA architectures don't update the + * DMA address immediately, but defer it to the enable_dma(). + */ +extern void __set_dma_addr(dmach_t channel, void *addr); +#define set_dma_addr(channel, addr) \ + __set_dma_addr(channel, bus_to_virt(addr)) + +/* Set the DMA byte count for this channel + * + * This should not be called if a DMA channel is enabled, + * especially since some DMA architectures don't update the + * DMA count immediately, but defer it to the enable_dma(). + */ +extern void set_dma_count(dmach_t channel, unsigned long count); + +/* Set the transfer direction for this channel + * + * This should not be called if a DMA channel is enabled, + * especially since some DMA architectures don't update the + * DMA transfer direction immediately, but defer it to the + * enable_dma(). + */ +extern void set_dma_mode(dmach_t channel, dmamode_t mode); + +/* Set the transfer speed for this channel + */ +extern void set_dma_speed(dmach_t channel, int cycle_ns); + +/* Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * If called before the channel has been used, it may return 1. + * Otherwise, it returns the number of _bytes_ left to transfer. + */ +extern int get_dma_residue(dmach_t channel); + +#ifndef NO_DMA +#define NO_DMA 255 +#endif + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* _ARM_DMA_H */ diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h new file mode 100644 index 000000000000..cc7ef4080711 --- /dev/null +++ b/arch/arm/include/asm/domain.h @@ -0,0 +1,78 @@ +/* + * arch/arm/include/asm/domain.h + * + * Copyright (C) 1999 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_PROC_DOMAIN_H +#define __ASM_PROC_DOMAIN_H + +/* + * Domain numbers + * + * DOMAIN_IO - domain 2 includes all IO only + * DOMAIN_USER - domain 1 includes all user memory only + * DOMAIN_KERNEL - domain 0 includes all kernel memory only + * + * The domain numbering depends on whether we support 36 physical + * address for I/O or not. Addresses above the 32 bit boundary can + * only be mapped using supersections and supersections can only + * be set for domain 0. We could just default to DOMAIN_IO as zero, + * but there may be systems with supersection support and no 36-bit + * addressing. In such cases, we want to map system memory with + * supersections to reduce TLB misses and footprint. + * + * 36-bit addressing and supersections are only available on + * CPUs based on ARMv6+ or the Intel XSC3 core. + */ +#ifndef CONFIG_IO_36 +#define DOMAIN_KERNEL 0 +#define DOMAIN_TABLE 0 +#define DOMAIN_USER 1 +#define DOMAIN_IO 2 +#else +#define DOMAIN_KERNEL 2 +#define DOMAIN_TABLE 2 +#define DOMAIN_USER 1 +#define DOMAIN_IO 0 +#endif + +/* + * Domain types + */ +#define DOMAIN_NOACCESS 0 +#define DOMAIN_CLIENT 1 +#define DOMAIN_MANAGER 3 + +#define domain_val(dom,type) ((type) << (2*(dom))) + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_MMU +#define set_domain(x) \ + do { \ + __asm__ __volatile__( \ + "mcr p15, 0, %0, c3, c0 @ set domain" \ + : : "r" (x)); \ + isb(); \ + } while (0) + +#define modify_domain(dom,type) \ + do { \ + struct thread_info *thread = current_thread_info(); \ + unsigned int domain = thread->cpu_domain; \ + domain &= ~domain_val(dom, DOMAIN_MANAGER); \ + thread->cpu_domain = domain | domain_val(dom, type); \ + set_domain(thread->cpu_domain); \ + } while (0) + +#else +#define set_domain(x) do { } while (0) +#define modify_domain(dom,type) do { } while (0) +#endif + +#endif +#endif /* !__ASSEMBLY__ */ diff --git a/arch/arm/include/asm/ecard.h b/arch/arm/include/asm/ecard.h new file mode 100644 index 000000000000..29f2610efc70 --- /dev/null +++ b/arch/arm/include/asm/ecard.h @@ -0,0 +1,219 @@ +/* + * arch/arm/include/asm/ecard.h + * + * definitions for expansion cards + * + * This is a new system as from Linux 1.2.3 + * + * Changelog: + * 11-12-1996 RMK Further minor improvements + * 12-09-1997 RMK Added interrupt enable/disable for card level + * + * Reference: Acorns Risc OS 3 Programmers Reference Manuals. + */ + +#ifndef __ASM_ECARD_H +#define __ASM_ECARD_H + +/* + * Currently understood cards (but not necessarily + * supported): + * Manufacturer Product ID + */ +#define MANU_ACORN 0x0000 +#define PROD_ACORN_SCSI 0x0002 +#define PROD_ACORN_ETHER1 0x0003 +#define PROD_ACORN_MFM 0x000b + +#define MANU_ANT2 0x0011 +#define PROD_ANT_ETHER3 0x00a4 + +#define MANU_ATOMWIDE 0x0017 +#define PROD_ATOMWIDE_3PSERIAL 0x0090 + +#define MANU_IRLAM_INSTRUMENTS 0x001f +#define MANU_IRLAM_INSTRUMENTS_ETHERN 0x5678 + +#define MANU_OAK 0x0021 +#define PROD_OAK_SCSI 0x0058 + +#define MANU_MORLEY 0x002b +#define PROD_MORLEY_SCSI_UNCACHED 0x0067 + +#define MANU_CUMANA 0x003a +#define PROD_CUMANA_SCSI_2 0x003a +#define PROD_CUMANA_SCSI_1 0x00a0 + +#define MANU_ICS 0x003c +#define PROD_ICS_IDE 0x00ae + +#define MANU_ICS2 0x003d +#define PROD_ICS2_IDE 0x00ae + +#define MANU_SERPORT 0x003f +#define PROD_SERPORT_DSPORT 0x00b9 + +#define MANU_ARXE 0x0041 +#define PROD_ARXE_SCSI 0x00be + +#define MANU_I3 0x0046 +#define PROD_I3_ETHERLAN500 0x00d4 +#define PROD_I3_ETHERLAN600 0x00ec +#define PROD_I3_ETHERLAN600A 0x011e + +#define MANU_ANT 0x0053 +#define PROD_ANT_ETHERM 0x00d8 +#define PROD_ANT_ETHERB 0x00e4 + +#define MANU_ALSYSTEMS 0x005b +#define PROD_ALSYS_SCSIATAPI 0x0107 + +#define MANU_MCS 0x0063 +#define PROD_MCS_CONNECT32 0x0125 + +#define MANU_EESOX 0x0064 +#define PROD_EESOX_SCSI2 0x008c + +#define MANU_YELLOWSTONE 0x0096 +#define PROD_YELLOWSTONE_RAPIDE32 0x0120 + +#ifdef ECARD_C +#define CONST +#else +#define CONST const +#endif + +#define MAX_ECARDS 9 + +struct ecard_id { /* Card ID structure */ + unsigned short manufacturer; + unsigned short product; + void *data; +}; + +struct in_ecid { /* Packed card ID information */ + unsigned short product; /* Product code */ + unsigned short manufacturer; /* Manufacturer code */ + unsigned char id:4; /* Simple ID */ + unsigned char cd:1; /* Chunk dir present */ + unsigned char is:1; /* Interrupt status pointers */ + unsigned char w:2; /* Width */ + unsigned char country; /* Country */ + unsigned char irqmask; /* IRQ mask */ + unsigned char fiqmask; /* FIQ mask */ + unsigned long irqoff; /* IRQ offset */ + unsigned long fiqoff; /* FIQ offset */ +}; + +typedef struct expansion_card ecard_t; +typedef unsigned long *loader_t; + +typedef struct expansion_card_ops { /* Card handler routines */ + void (*irqenable)(ecard_t *ec, int irqnr); + void (*irqdisable)(ecard_t *ec, int irqnr); + int (*irqpending)(ecard_t *ec); + void (*fiqenable)(ecard_t *ec, int fiqnr); + void (*fiqdisable)(ecard_t *ec, int fiqnr); + int (*fiqpending)(ecard_t *ec); +} expansioncard_ops_t; + +#define ECARD_NUM_RESOURCES (6) + +#define ECARD_RES_IOCSLOW (0) +#define ECARD_RES_IOCMEDIUM (1) +#define ECARD_RES_IOCFAST (2) +#define ECARD_RES_IOCSYNC (3) +#define ECARD_RES_MEMC (4) +#define ECARD_RES_EASI (5) + +#define ecard_resource_start(ec,nr) ((ec)->resource[nr].start) +#define ecard_resource_end(ec,nr) ((ec)->resource[nr].end) +#define ecard_resource_len(ec,nr) ((ec)->resource[nr].end - \ + (ec)->resource[nr].start + 1) +#define ecard_resource_flags(ec,nr) ((ec)->resource[nr].flags) + +/* + * This contains all the info needed on an expansion card + */ +struct expansion_card { + struct expansion_card *next; + + struct device dev; + struct resource resource[ECARD_NUM_RESOURCES]; + + /* Public data */ + void __iomem *irqaddr; /* address of IRQ register */ + void __iomem *fiqaddr; /* address of FIQ register */ + unsigned char irqmask; /* IRQ mask */ + unsigned char fiqmask; /* FIQ mask */ + unsigned char claimed; /* Card claimed? */ + unsigned char easi; /* EASI card */ + + void *irq_data; /* Data for use for IRQ by card */ + void *fiq_data; /* Data for use for FIQ by card */ + const expansioncard_ops_t *ops; /* Enable/Disable Ops for card */ + + CONST unsigned int slot_no; /* Slot number */ + CONST unsigned int dma; /* DMA number (for request_dma) */ + CONST unsigned int irq; /* IRQ number (for request_irq) */ + CONST unsigned int fiq; /* FIQ number (for request_irq) */ + CONST struct in_ecid cid; /* Card Identification */ + + /* Private internal data */ + const char *card_desc; /* Card description */ + CONST unsigned int podaddr; /* Base Linux address for card */ + CONST loader_t loader; /* loader program */ + u64 dma_mask; +}; + +void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data); + +struct in_chunk_dir { + unsigned int start_offset; + union { + unsigned char string[256]; + unsigned char data[1]; + } d; +}; + +/* + * Read a chunk from an expansion card + * cd : where to put read data + * ec : expansion card info struct + * id : id number to find + * num: (n+1)'th id to find. + */ +extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num); + +/* + * Request and release ecard resources + */ +extern int ecard_request_resources(struct expansion_card *ec); +extern void ecard_release_resources(struct expansion_card *ec); + +void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res, + unsigned long offset, unsigned long maxsize); +#define ecardm_iounmap(__ec, __addr) devm_iounmap(&(__ec)->dev, __addr) + +extern struct bus_type ecard_bus_type; + +#define ECARD_DEV(_d) container_of((_d), struct expansion_card, dev) + +struct ecard_driver { + int (*probe)(struct expansion_card *, const struct ecard_id *id); + void (*remove)(struct expansion_card *); + void (*shutdown)(struct expansion_card *); + const struct ecard_id *id_table; + unsigned int id; + struct device_driver drv; +}; + +#define ECARD_DRV(_d) container_of((_d), struct ecard_driver, drv) + +#define ecard_set_drvdata(ec,data) dev_set_drvdata(&(ec)->dev, (data)) +#define ecard_get_drvdata(ec) dev_get_drvdata(&(ec)->dev) + +int ecard_register_driver(struct ecard_driver *); +void ecard_remove_driver(struct ecard_driver *); + +#endif diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h new file mode 100644 index 000000000000..4ca751627489 --- /dev/null +++ b/arch/arm/include/asm/elf.h @@ -0,0 +1,116 @@ +#ifndef __ASMARM_ELF_H +#define __ASMARM_ELF_H + +#include + +#ifndef __ASSEMBLY__ +/* + * ELF register definitions.. + */ +#include +#include + +typedef unsigned long elf_greg_t; +typedef unsigned long elf_freg_t[3]; + +#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_fp elf_fpregset_t; +#endif + +#define EM_ARM 40 +#define EF_ARM_APCS26 0x08 +#define EF_ARM_SOFT_FLOAT 0x200 +#define EF_ARM_EABI_MASK 0xFF000000 + +#define R_ARM_NONE 0 +#define R_ARM_PC24 1 +#define R_ARM_ABS32 2 +#define R_ARM_CALL 28 +#define R_ARM_JUMP24 29 + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#ifdef __ARMEB__ +#define ELF_DATA ELFDATA2MSB +#else +#define ELF_DATA ELFDATA2LSB +#endif +#define ELF_ARCH EM_ARM + +#ifndef __ASSEMBLY__ +/* + * This yields a string that ld.so will use to load implementation + * specific libraries for optimization. This is more specific in + * intent than poking at uname or /proc/cpuinfo. + * + * For now we just provide a fairly general string that describes the + * processor family. This could be made more specific later if someone + * implemented optimisations that require it. 26-bit CPUs give you + * "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't + * supported). 32-bit CPUs give you "v3[lb]" for anything based on an + * ARM6 or ARM7 core and "armv4[lb]" for anything based on a StrongARM-1 + * core. + */ +#define ELF_PLATFORM_SIZE 8 +#define ELF_PLATFORM (elf_platform) + +extern char elf_platform[]; +#endif + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_ARM && ELF_PROC_OK(x)) + +/* + * 32-bit code is always OK. Some cpus can do 26-bit, some can't. + */ +#define ELF_PROC_OK(x) (ELF_THUMB_OK(x) && ELF_26BIT_OK(x)) + +#define ELF_THUMB_OK(x) \ + ((elf_hwcap & HWCAP_THUMB && ((x)->e_entry & 1) == 1) || \ + ((x)->e_entry & 3) == 0) + +#define ELF_26BIT_OK(x) \ + ((elf_hwcap & HWCAP_26BIT && (x)->e_flags & EF_ARM_APCS26) || \ + ((x)->e_flags & EF_ARM_APCS26) == 0) + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE 4096 + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) + +/* When the program starts, a1 contains a pointer to a function to be + registered with atexit, as per the SVR4 ABI. A value of 0 means we + have no such handler. */ +#define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0 + +/* + * Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0 + * and CP1, we only enable access to the iWMMXt coprocessor if the + * binary is EABI or softfloat (and thus, guaranteed not to use + * FPA instructions.) + */ +#define SET_PERSONALITY(ex, ibcs2) \ + do { \ + if ((ex).e_flags & EF_ARM_APCS26) { \ + set_personality(PER_LINUX); \ + } else { \ + set_personality(PER_LINUX_32BIT); \ + if (elf_hwcap & HWCAP_IWMMXT && (ex).e_flags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) \ + set_thread_flag(TIF_USING_IWMMXT); \ + else \ + clear_thread_flag(TIF_USING_IWMMXT); \ + } \ + } while (0) + +#endif diff --git a/arch/arm/include/asm/emergency-restart.h b/arch/arm/include/asm/emergency-restart.h new file mode 100644 index 000000000000..108d8c48e42e --- /dev/null +++ b/arch/arm/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/arm/include/asm/errno.h b/arch/arm/include/asm/errno.h new file mode 100644 index 000000000000..6e60f0612bb6 --- /dev/null +++ b/arch/arm/include/asm/errno.h @@ -0,0 +1,6 @@ +#ifndef _ARM_ERRNO_H +#define _ARM_ERRNO_H + +#include + +#endif diff --git a/arch/arm/include/asm/fb.h b/arch/arm/include/asm/fb.h new file mode 100644 index 000000000000..d92e99cd8c8a --- /dev/null +++ b/arch/arm/include/asm/fb.h @@ -0,0 +1,19 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include +#include +#include + +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); +} + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/arm/include/asm/fcntl.h b/arch/arm/include/asm/fcntl.h new file mode 100644 index 000000000000..a80b6607b2ef --- /dev/null +++ b/arch/arm/include/asm/fcntl.h @@ -0,0 +1,11 @@ +#ifndef _ARM_FCNTL_H +#define _ARM_FCNTL_H + +#define O_DIRECTORY 040000 /* must be a directory */ +#define O_NOFOLLOW 0100000 /* don't follow links */ +#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ +#define O_LARGEFILE 0400000 + +#include + +#endif diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h new file mode 100644 index 000000000000..2242ce22ec6c --- /dev/null +++ b/arch/arm/include/asm/fiq.h @@ -0,0 +1,37 @@ +/* + * arch/arm/include/asm/fiq.h + * + * Support for FIQ on ARM architectures. + * Written by Philip Blundell , 1998 + * Re-written by Russell King + */ + +#ifndef __ASM_FIQ_H +#define __ASM_FIQ_H + +#include + +struct fiq_handler { + struct fiq_handler *next; + /* Name + */ + const char *name; + /* Called to ask driver to relinquish/ + * reacquire FIQ + * return zero to accept, or - + */ + int (*fiq_op)(void *, int relinquish); + /* data for the relinquish/reacquire functions + */ + void *dev_id; +}; + +extern int claim_fiq(struct fiq_handler *f); +extern void release_fiq(struct fiq_handler *f); +extern void set_fiq_handler(void *start, unsigned int length); +extern void set_fiq_regs(struct pt_regs *regs); +extern void get_fiq_regs(struct pt_regs *regs); +extern void enable_fiq(int fiq); +extern void disable_fiq(int fiq); + +#endif diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h new file mode 100644 index 000000000000..1d77e51907f6 --- /dev/null +++ b/arch/arm/include/asm/flat.h @@ -0,0 +1,19 @@ +/* + * arch/arm/include/asm/flat.h -- uClinux flat-format executables + */ + +#ifndef __ARM_FLAT_H__ +#define __ARM_FLAT_H__ + +/* An odd number of words will be pushed after this alignment, so + deliberately misalign the value. */ +#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4) +#define flat_argvp_envp_on_stack() 1 +#define flat_old_ram_flag(flags) (flags) +#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) +#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp) +#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) +#define flat_get_relocate_addr(rel) (rel) +#define flat_set_persistent(relval, p) 0 + +#endif /* __ARM_FLAT_H__ */ diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h new file mode 100644 index 000000000000..dce20c25ab10 --- /dev/null +++ b/arch/arm/include/asm/floppy.h @@ -0,0 +1,148 @@ +/* + * arch/arm/include/asm/floppy.h + * + * Copyright (C) 1996-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here + */ +#ifndef __ASM_ARM_FLOPPY_H +#define __ASM_ARM_FLOPPY_H +#if 0 +#include +#endif + +#define fd_outb(val,port) \ + do { \ + if ((port) == FD_DOR) \ + fd_setdor((val)); \ + else \ + outb((val),(port)); \ + } while(0) + +#define fd_inb(port) inb((port)) +#define fd_request_irq() request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\ + IRQF_DISABLED,"floppy",NULL) +#define fd_free_irq() free_irq(IRQ_FLOPPYDISK,NULL) +#define fd_disable_irq() disable_irq(IRQ_FLOPPYDISK) +#define fd_enable_irq() enable_irq(IRQ_FLOPPYDISK) + +static inline int fd_dma_setup(void *data, unsigned int length, + unsigned int mode, unsigned long addr) +{ + set_dma_mode(DMA_FLOPPY, mode); + __set_dma_addr(DMA_FLOPPY, data); + set_dma_count(DMA_FLOPPY, length); + virtual_dma_port = addr; + enable_dma(DMA_FLOPPY); + return 0; +} +#define fd_dma_setup fd_dma_setup + +#define fd_request_dma() request_dma(DMA_FLOPPY,"floppy") +#define fd_free_dma() free_dma(DMA_FLOPPY) +#define fd_disable_dma() disable_dma(DMA_FLOPPY) + +/* need to clean up dma.h */ +#define DMA_FLOPPYDISK DMA_FLOPPY + +/* Floppy_selects is the list of DOR's to select drive fd + * + * On initialisation, the floppy list is scanned, and the drives allocated + * in the order that they are found. This is done by seeking the drive + * to a non-zero track, and then restoring it to track 0. If an error occurs, + * then there is no floppy drive present. [to be put back in again] + */ +static unsigned char floppy_selects[2][4] = +{ + { 0x10, 0x21, 0x23, 0x33 }, + { 0x10, 0x21, 0x23, 0x33 } +}; + +#define fd_setdor(dor) \ +do { \ + int new_dor = (dor); \ + if (new_dor & 0xf0) \ + new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3]; \ + else \ + new_dor &= 0x0c; \ + outb(new_dor, FD_DOR); \ +} while (0) + +/* + * Someday, we'll automatically detect which drives are present... + */ +static inline void fd_scandrives (void) +{ +#if 0 + int floppy, drive_count; + + fd_disable_irq(); + raw_cmd = &default_raw_cmd; + raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK; + raw_cmd->track = 0; + raw_cmd->rate = ?; + drive_count = 0; + for (floppy = 0; floppy < 4; floppy ++) { + current_drive = drive_count; + /* + * Turn on floppy motor + */ + if (start_motor(redo_fd_request)) + continue; + /* + * Set up FDC + */ + fdc_specify(); + /* + * Tell FDC to recalibrate + */ + output_byte(FD_RECALIBRATE); + LAST_OUT(UNIT(floppy)); + /* wait for command to complete */ + if (!successful) { + int i; + for (i = drive_count; i < 3; i--) + floppy_selects[fdc][i] = floppy_selects[fdc][i + 1]; + floppy_selects[fdc][3] = 0; + floppy -= 1; + } else + drive_count++; + } +#else + floppy_selects[0][0] = 0x10; + floppy_selects[0][1] = 0x21; + floppy_selects[0][2] = 0x23; + floppy_selects[0][3] = 0x33; +#endif +} + +#define FDC1 (0x3f0) + +#define FLOPPY0_TYPE 4 +#define FLOPPY1_TYPE 4 + +#define N_FDC 1 +#define N_DRIVE 4 + +#define CROSS_64KB(a,s) (0) + +/* + * This allows people to reverse the order of + * fd0 and fd1, in case their hardware is + * strangely connected (as some RiscPCs + * and A5000s seem to be). + */ +static void driveswap(int *ints, int dummy, int dummy2) +{ + floppy_selects[0][0] ^= floppy_selects[0][1]; + floppy_selects[0][1] ^= floppy_selects[0][0]; + floppy_selects[0][0] ^= floppy_selects[0][1]; +} + +#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 } + +#endif diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h new file mode 100644 index 000000000000..ee5e03efc1bb --- /dev/null +++ b/arch/arm/include/asm/fpstate.h @@ -0,0 +1,93 @@ +/* + * arch/arm/include/asm/fpstate.h + * + * Copyright (C) 1995 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_FPSTATE_H +#define __ASM_ARM_FPSTATE_H + + +#ifndef __ASSEMBLY__ + +/* + * VFP storage area has: + * - FPEXC, FPSCR, FPINST and FPINST2. + * - 16 or 32 double precision data registers + * - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6) + * + * FPEXC will always be non-zero once the VFP has been used in this process. + */ + +struct vfp_hard_struct { +#ifdef CONFIG_VFPv3 + __u64 fpregs[32]; +#else + __u64 fpregs[16]; +#endif +#if __LINUX_ARM_ARCH__ < 6 + __u32 fpmx_state; +#endif + __u32 fpexc; + __u32 fpscr; + /* + * VFP implementation specific state + */ + __u32 fpinst; + __u32 fpinst2; + +#ifdef CONFIG_SMP + __u32 cpu; +#endif +}; + +union vfp_state { + struct vfp_hard_struct hard; +}; + +extern void vfp_flush_thread(union vfp_state *); +extern void vfp_release_thread(union vfp_state *); + +#define FP_HARD_SIZE 35 + +struct fp_hard_struct { + unsigned int save[FP_HARD_SIZE]; /* as yet undefined */ +}; + +#define FP_SOFT_SIZE 35 + +struct fp_soft_struct { + unsigned int save[FP_SOFT_SIZE]; /* undefined information */ +}; + +#define IWMMXT_SIZE 0x98 + +struct iwmmxt_struct { + unsigned int save[IWMMXT_SIZE / sizeof(unsigned int)]; +}; + +union fp_state { + struct fp_hard_struct hard; + struct fp_soft_struct soft; +#ifdef CONFIG_IWMMXT + struct iwmmxt_struct iwmmxt; +#endif +}; + +#define FP_SIZE (sizeof(union fp_state) / sizeof(int)) + +struct crunch_state { + unsigned int mvdx[16][2]; + unsigned int mvax[4][3]; + unsigned int dspsc[2]; +}; + +#define CRUNCH_SIZE sizeof(struct crunch_state) + +#endif + +#endif diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h new file mode 100644 index 000000000000..584ef9a8e5a5 --- /dev/null +++ b/arch/arm/include/asm/ftrace.h @@ -0,0 +1,14 @@ +#ifndef _ASM_ARM_FTRACE +#define _ASM_ARM_FTRACE + +#ifdef CONFIG_FTRACE +#define MCOUNT_ADDR ((long)(mcount)) +#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ + +#ifndef __ASSEMBLY__ +extern void mcount(void); +#endif + +#endif + +#endif /* _ASM_ARM_FTRACE */ diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h new file mode 100644 index 000000000000..6a332a9f099c --- /dev/null +++ b/arch/arm/include/asm/futex.h @@ -0,0 +1,6 @@ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#include + +#endif diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h new file mode 100644 index 000000000000..a0e39d5d00c9 --- /dev/null +++ b/arch/arm/include/asm/glue.h @@ -0,0 +1,149 @@ +/* + * arch/arm/include/asm/glue.h + * + * Copyright (C) 1997-1999 Russell King + * Copyright (C) 2000-2002 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file provides the glue to stick the processor-specific bits + * into the kernel in an efficient manner. The idea is to use branches + * when we're only targetting one class of TLB, or indirect calls + * when we're targetting multiple classes of TLBs. + */ +#ifdef __KERNEL__ + + +#ifdef __STDC__ +#define ____glue(name,fn) name##fn +#else +#define ____glue(name,fn) name/**/fn +#endif +#define __glue(name,fn) ____glue(name,fn) + + + +/* + * Data Abort Model + * ================ + * + * We have the following to choose from: + * arm6 - ARM6 style + * arm7 - ARM7 style + * v4_early - ARMv4 without Thumb early abort handler + * v4t_late - ARMv4 with Thumb late abort handler + * v4t_early - ARMv4 with Thumb early abort handler + * v5tej_early - ARMv5 with Thumb and Java early abort handler + * xscale - ARMv5 with Thumb with Xscale extensions + * v6_early - ARMv6 generic early abort handler + * v7_early - ARMv7 generic early abort handler + */ +#undef CPU_DABORT_HANDLER +#undef MULTI_DABORT + +#if defined(CONFIG_CPU_ARM610) +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER cpu_arm6_data_abort +# endif +#endif + +#if defined(CONFIG_CPU_ARM710) +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER cpu_arm7_data_abort +# endif +#endif + +#ifdef CONFIG_CPU_ABRT_LV4T +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER v4t_late_abort +# endif +#endif + +#ifdef CONFIG_CPU_ABRT_EV4 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER v4_early_abort +# endif +#endif + +#ifdef CONFIG_CPU_ABRT_EV4T +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER v4t_early_abort +# endif +#endif + +#ifdef CONFIG_CPU_ABRT_EV5TJ +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER v5tj_early_abort +# endif +#endif + +#ifdef CONFIG_CPU_ABRT_EV5T +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER v5t_early_abort +# endif +#endif + +#ifdef CONFIG_CPU_ABRT_EV6 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER v6_early_abort +# endif +#endif + +#ifdef CONFIG_CPU_ABRT_EV7 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER v7_early_abort +# endif +#endif + +#ifndef CPU_DABORT_HANDLER +#error Unknown data abort handler type +#endif + +/* + * Prefetch abort handler. If the CPU has an IFAR use that, otherwise + * use the address of the aborted instruction + */ +#undef CPU_PABORT_HANDLER +#undef MULTI_PABORT + +#ifdef CONFIG_CPU_PABRT_IFAR +# ifdef CPU_PABORT_HANDLER +# define MULTI_PABORT 1 +# else +# define CPU_PABORT_HANDLER(reg, insn) mrc p15, 0, reg, cr6, cr0, 2 +# endif +#endif + +#ifdef CONFIG_CPU_PABRT_NOIFAR +# ifdef CPU_PABORT_HANDLER +# define MULTI_PABORT 1 +# else +# define CPU_PABORT_HANDLER(reg, insn) mov reg, insn +# endif +#endif + +#ifndef CPU_PABORT_HANDLER +#error Unknown prefetch abort handler type +#endif + +#endif diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h new file mode 100644 index 000000000000..fff4f800ee42 --- /dev/null +++ b/arch/arm/include/asm/gpio.h @@ -0,0 +1,7 @@ +#ifndef _ARCH_ARM_GPIO_H +#define _ARCH_ARM_GPIO_H + +/* not all ARM platforms necessarily support this API ... */ +#include + +#endif /* _ARCH_ARM_GPIO_H */ diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h new file mode 100644 index 000000000000..182310b99195 --- /dev/null +++ b/arch/arm/include/asm/hardirq.h @@ -0,0 +1,32 @@ +#ifndef __ASM_HARDIRQ_H +#define __ASM_HARDIRQ_H + +#include +#include +#include + +typedef struct { + unsigned int __softirq_pending; + unsigned int local_timer_irqs; +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +#if NR_IRQS > 256 +#define HARDIRQ_BITS 9 +#else +#define HARDIRQ_BITS 8 +#endif + +/* + * The hardirq mask has to be large enough to have space + * for potentially all IRQ sources in the system nesting + * on a single CPU: + */ +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +#define __ARCH_IRQ_EXIT_IRQS_DISABLED 1 + +#endif /* __ASM_HARDIRQ_H */ diff --git a/arch/arm/include/asm/hardware.h b/arch/arm/include/asm/hardware.h new file mode 100644 index 000000000000..eb3b3abb7db7 --- /dev/null +++ b/arch/arm/include/asm/hardware.h @@ -0,0 +1,18 @@ +/* + * arch/arm/include/asm/hardware.h + * + * Copyright (C) 1996 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common hardware definitions + */ + +#ifndef __ASM_HARDWARE_H +#define __ASM_HARDWARE_H + +#include + +#endif diff --git a/arch/arm/include/asm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h new file mode 100644 index 000000000000..04be3bdf46b8 --- /dev/null +++ b/arch/arm/include/asm/hardware/arm_timer.h @@ -0,0 +1,21 @@ +#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H +#define __ASM_ARM_HARDWARE_ARM_TIMER_H + +#define TIMER_LOAD 0x00 +#define TIMER_VALUE 0x04 +#define TIMER_CTRL 0x08 +#define TIMER_CTRL_ONESHOT (1 << 0) +#define TIMER_CTRL_32BIT (1 << 1) +#define TIMER_CTRL_DIV1 (0 << 2) +#define TIMER_CTRL_DIV16 (1 << 2) +#define TIMER_CTRL_DIV256 (2 << 2) +#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable (versatile only) */ +#define TIMER_CTRL_PERIODIC (1 << 6) +#define TIMER_CTRL_ENABLE (1 << 7) + +#define TIMER_INTCLR 0x0c +#define TIMER_RIS 0x10 +#define TIMER_MIS 0x14 +#define TIMER_BGLOAD 0x18 + +#endif diff --git a/arch/arm/include/asm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h new file mode 100644 index 000000000000..e521b70713c8 --- /dev/null +++ b/arch/arm/include/asm/hardware/arm_twd.h @@ -0,0 +1,21 @@ +#ifndef __ASM_HARDWARE_TWD_H +#define __ASM_HARDWARE_TWD_H + +#define TWD_TIMER_LOAD 0x00 +#define TWD_TIMER_COUNTER 0x04 +#define TWD_TIMER_CONTROL 0x08 +#define TWD_TIMER_INTSTAT 0x0C + +#define TWD_WDOG_LOAD 0x20 +#define TWD_WDOG_COUNTER 0x24 +#define TWD_WDOG_CONTROL 0x28 +#define TWD_WDOG_INTSTAT 0x2C +#define TWD_WDOG_RESETSTAT 0x30 +#define TWD_WDOG_DISABLE 0x34 + +#define TWD_TIMER_CONTROL_ENABLE (1 << 0) +#define TWD_TIMER_CONTROL_ONESHOT (0 << 1) +#define TWD_TIMER_CONTROL_PERIODIC (1 << 1) +#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2) + +#endif diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h new file mode 100644 index 000000000000..64f2252a25cd --- /dev/null +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -0,0 +1,56 @@ +/* + * arch/arm/include/asm/hardware/cache-l2x0.h + * + * Copyright (C) 2007 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_HARDWARE_L2X0_H +#define __ASM_ARM_HARDWARE_L2X0_H + +#define L2X0_CACHE_ID 0x000 +#define L2X0_CACHE_TYPE 0x004 +#define L2X0_CTRL 0x100 +#define L2X0_AUX_CTRL 0x104 +#define L2X0_EVENT_CNT_CTRL 0x200 +#define L2X0_EVENT_CNT1_CFG 0x204 +#define L2X0_EVENT_CNT0_CFG 0x208 +#define L2X0_EVENT_CNT1_VAL 0x20C +#define L2X0_EVENT_CNT0_VAL 0x210 +#define L2X0_INTR_MASK 0x214 +#define L2X0_MASKED_INTR_STAT 0x218 +#define L2X0_RAW_INTR_STAT 0x21C +#define L2X0_INTR_CLEAR 0x220 +#define L2X0_CACHE_SYNC 0x730 +#define L2X0_INV_LINE_PA 0x770 +#define L2X0_INV_WAY 0x77C +#define L2X0_CLEAN_LINE_PA 0x7B0 +#define L2X0_CLEAN_LINE_IDX 0x7B8 +#define L2X0_CLEAN_WAY 0x7BC +#define L2X0_CLEAN_INV_LINE_PA 0x7F0 +#define L2X0_CLEAN_INV_LINE_IDX 0x7F8 +#define L2X0_CLEAN_INV_WAY 0x7FC +#define L2X0_LOCKDOWN_WAY_D 0x900 +#define L2X0_LOCKDOWN_WAY_I 0x904 +#define L2X0_TEST_OPERATION 0xF00 +#define L2X0_LINE_DATA 0xF10 +#define L2X0_LINE_TAG 0xF30 +#define L2X0_DEBUG_CTRL 0xF40 + +#ifndef __ASSEMBLY__ +extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask); +#endif + +#endif diff --git a/arch/arm/include/asm/hardware/clps7111.h b/arch/arm/include/asm/hardware/clps7111.h new file mode 100644 index 000000000000..44477225aed6 --- /dev/null +++ b/arch/arm/include/asm/hardware/clps7111.h @@ -0,0 +1,184 @@ +/* + * arch/arm/include/asm/hardware/clps7111.h + * + * This file contains the hardware definitions of the CLPS7111 internal + * registers. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_HARDWARE_CLPS7111_H +#define __ASM_HARDWARE_CLPS7111_H + +#define CLPS7111_PHYS_BASE (0x80000000) + +#ifndef __ASSEMBLY__ +#define clps_readb(off) __raw_readb(CLPS7111_BASE + (off)) +#define clps_readw(off) __raw_readw(CLPS7111_BASE + (off)) +#define clps_readl(off) __raw_readl(CLPS7111_BASE + (off)) +#define clps_writeb(val,off) __raw_writeb(val, CLPS7111_BASE + (off)) +#define clps_writew(val,off) __raw_writew(val, CLPS7111_BASE + (off)) +#define clps_writel(val,off) __raw_writel(val, CLPS7111_BASE + (off)) +#endif + +#define PADR (0x0000) +#define PBDR (0x0001) +#define PDDR (0x0003) +#define PADDR (0x0040) +#define PBDDR (0x0041) +#define PDDDR (0x0043) +#define PEDR (0x0080) +#define PEDDR (0x00c0) +#define SYSCON1 (0x0100) +#define SYSFLG1 (0x0140) +#define MEMCFG1 (0x0180) +#define MEMCFG2 (0x01c0) +#define DRFPR (0x0200) +#define INTSR1 (0x0240) +#define INTMR1 (0x0280) +#define LCDCON (0x02c0) +#define TC1D (0x0300) +#define TC2D (0x0340) +#define RTCDR (0x0380) +#define RTCMR (0x03c0) +#define PMPCON (0x0400) +#define CODR (0x0440) +#define UARTDR1 (0x0480) +#define UBRLCR1 (0x04c0) +#define SYNCIO (0x0500) +#define PALLSW (0x0540) +#define PALMSW (0x0580) +#define STFCLR (0x05c0) +#define BLEOI (0x0600) +#define MCEOI (0x0640) +#define TEOI (0x0680) +#define TC1EOI (0x06c0) +#define TC2EOI (0x0700) +#define RTCEOI (0x0740) +#define UMSEOI (0x0780) +#define COEOI (0x07c0) +#define HALT (0x0800) +#define STDBY (0x0840) + +#define FBADDR (0x1000) +#define SYSCON2 (0x1100) +#define SYSFLG2 (0x1140) +#define INTSR2 (0x1240) +#define INTMR2 (0x1280) +#define UARTDR2 (0x1480) +#define UBRLCR2 (0x14c0) +#define SS2DR (0x1500) +#define SRXEOF (0x1600) +#define SS2POP (0x16c0) +#define KBDEOI (0x1700) + +/* common bits: SYSCON1 / SYSCON2 */ +#define SYSCON_UARTEN (1 << 8) + +#define SYSCON1_KBDSCAN(x) ((x) & 15) +#define SYSCON1_KBDSCANMASK (15) +#define SYSCON1_TC1M (1 << 4) +#define SYSCON1_TC1S (1 << 5) +#define SYSCON1_TC2M (1 << 6) +#define SYSCON1_TC2S (1 << 7) +#define SYSCON1_UART1EN SYSCON_UARTEN +#define SYSCON1_BZTOG (1 << 9) +#define SYSCON1_BZMOD (1 << 10) +#define SYSCON1_DBGEN (1 << 11) +#define SYSCON1_LCDEN (1 << 12) +#define SYSCON1_CDENTX (1 << 13) +#define SYSCON1_CDENRX (1 << 14) +#define SYSCON1_SIREN (1 << 15) +#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16) +#define SYSCON1_ADCKSEL_MASK (3 << 16) +#define SYSCON1_EXCKEN (1 << 18) +#define SYSCON1_WAKEDIS (1 << 19) +#define SYSCON1_IRTXM (1 << 20) + +/* common bits: SYSFLG1 / SYSFLG2 */ +#define SYSFLG_UBUSY (1 << 11) +#define SYSFLG_URXFE (1 << 22) +#define SYSFLG_UTXFF (1 << 23) + +#define SYSFLG1_MCDR (1 << 0) +#define SYSFLG1_DCDET (1 << 1) +#define SYSFLG1_WUDR (1 << 2) +#define SYSFLG1_WUON (1 << 3) +#define SYSFLG1_CTS (1 << 8) +#define SYSFLG1_DSR (1 << 9) +#define SYSFLG1_DCD (1 << 10) +#define SYSFLG1_UBUSY SYSFLG_UBUSY +#define SYSFLG1_NBFLG (1 << 12) +#define SYSFLG1_RSTFLG (1 << 13) +#define SYSFLG1_PFFLG (1 << 14) +#define SYSFLG1_CLDFLG (1 << 15) +#define SYSFLG1_URXFE SYSFLG_URXFE +#define SYSFLG1_UTXFF SYSFLG_UTXFF +#define SYSFLG1_CRXFE (1 << 24) +#define SYSFLG1_CTXFF (1 << 25) +#define SYSFLG1_SSIBUSY (1 << 26) +#define SYSFLG1_ID (1 << 29) + +#define SYSFLG2_SSRXOF (1 << 0) +#define SYSFLG2_RESVAL (1 << 1) +#define SYSFLG2_RESFRM (1 << 2) +#define SYSFLG2_SS2RXFE (1 << 3) +#define SYSFLG2_SS2TXFF (1 << 4) +#define SYSFLG2_SS2TXUF (1 << 5) +#define SYSFLG2_CKMODE (1 << 6) +#define SYSFLG2_UBUSY SYSFLG_UBUSY +#define SYSFLG2_URXFE SYSFLG_URXFE +#define SYSFLG2_UTXFF SYSFLG_UTXFF + +#define LCDCON_GSEN (1 << 30) +#define LCDCON_GSMD (1 << 31) + +#define SYSCON2_SERSEL (1 << 0) +#define SYSCON2_KBD6 (1 << 1) +#define SYSCON2_DRAMZ (1 << 2) +#define SYSCON2_KBWEN (1 << 3) +#define SYSCON2_SS2TXEN (1 << 4) +#define SYSCON2_PCCARD1 (1 << 5) +#define SYSCON2_PCCARD2 (1 << 6) +#define SYSCON2_SS2RXEN (1 << 7) +#define SYSCON2_UART2EN SYSCON_UARTEN +#define SYSCON2_SS2MAEN (1 << 9) +#define SYSCON2_OSTB (1 << 12) +#define SYSCON2_CLKENSL (1 << 13) +#define SYSCON2_BUZFREQ (1 << 14) + +/* common bits: UARTDR1 / UARTDR2 */ +#define UARTDR_FRMERR (1 << 8) +#define UARTDR_PARERR (1 << 9) +#define UARTDR_OVERR (1 << 10) + +/* common bits: UBRLCR1 / UBRLCR2 */ +#define UBRLCR_BAUD_MASK ((1 << 12) - 1) +#define UBRLCR_BREAK (1 << 12) +#define UBRLCR_PRTEN (1 << 13) +#define UBRLCR_EVENPRT (1 << 14) +#define UBRLCR_XSTOP (1 << 15) +#define UBRLCR_FIFOEN (1 << 16) +#define UBRLCR_WRDLEN5 (0 << 17) +#define UBRLCR_WRDLEN6 (1 << 17) +#define UBRLCR_WRDLEN7 (2 << 17) +#define UBRLCR_WRDLEN8 (3 << 17) +#define UBRLCR_WRDLEN_MASK (3 << 17) + +#define SYNCIO_SMCKEN (1 << 13) +#define SYNCIO_TXFRMEN (1 << 14) + +#endif /* __ASM_HARDWARE_CLPS7111_H */ diff --git a/arch/arm/include/asm/hardware/cs89712.h b/arch/arm/include/asm/hardware/cs89712.h new file mode 100644 index 000000000000..f75626933e94 --- /dev/null +++ b/arch/arm/include/asm/hardware/cs89712.h @@ -0,0 +1,49 @@ +/* + * arch/arm/include/asm/hardware/cs89712.h + * + * This file contains the hardware definitions of the CS89712 + * additional internal registers. + * + * Copyright (C) 2001 Thomas Gleixner autronix automation + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_HARDWARE_CS89712_H +#define __ASM_HARDWARE_CS89712_H + +/* +* CS89712 additional registers +*/ + +#define PCDR 0x0002 /* Port C Data register ---------------------------- */ +#define PCDDR 0x0042 /* Port C Data Direction register ------------------ */ +#define SDCONF 0x2300 /* SDRAM Configuration register ---------------------*/ +#define SDRFPR 0x2340 /* SDRAM Refresh period register --------------------*/ + +#define SDCONF_ACTIVE (1 << 10) +#define SDCONF_CLKCTL (1 << 9) +#define SDCONF_WIDTH_4 (0 << 7) +#define SDCONF_WIDTH_8 (1 << 7) +#define SDCONF_WIDTH_16 (2 << 7) +#define SDCONF_WIDTH_32 (3 << 7) +#define SDCONF_SIZE_16 (0 << 5) +#define SDCONF_SIZE_64 (1 << 5) +#define SDCONF_SIZE_128 (2 << 5) +#define SDCONF_SIZE_256 (3 << 5) +#define SDCONF_CASLAT_2 (2) +#define SDCONF_CASLAT_3 (3) + +#endif /* __ASM_HARDWARE_CS89712_H */ diff --git a/arch/arm/include/asm/hardware/debug-8250.S b/arch/arm/include/asm/hardware/debug-8250.S new file mode 100644 index 000000000000..22c689255e6e --- /dev/null +++ b/arch/arm/include/asm/hardware/debug-8250.S @@ -0,0 +1,29 @@ +/* + * arch/arm/include/asm/hardware/debug-8250.S + * + * Copyright (C) 1994-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + + .macro senduart,rd,rx + strb \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + .macro waituart,rd,rx +#ifdef FLOW_CONTROL +1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT] + tst \rd, #UART_MSR_CTS + beq 1001b +#endif + .endm diff --git a/arch/arm/include/asm/hardware/debug-pl01x.S b/arch/arm/include/asm/hardware/debug-pl01x.S new file mode 100644 index 000000000000..f9fd083eff63 --- /dev/null +++ b/arch/arm/include/asm/hardware/debug-pl01x.S @@ -0,0 +1,29 @@ +/* arch/arm/include/asm/hardware/debug-pl01x.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ +#include + + .macro senduart,rd,rx + strb \rd, [\rx, #UART01x_DR] + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #UART01x_FR] + tst \rd, #UART01x_FR_TXFF + bne 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #UART01x_FR] + tst \rd, #UART01x_FR_BUSY + bne 1001b + .endm diff --git a/arch/arm/include/asm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h new file mode 100644 index 000000000000..7068a1c1e4e4 --- /dev/null +++ b/arch/arm/include/asm/hardware/dec21285.h @@ -0,0 +1,147 @@ +/* + * arch/arm/include/asm/hardware/dec21285.h + * + * Copyright (C) 1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * DC21285 registers + */ +#define DC21285_PCI_IACK 0x79000000 +#define DC21285_ARMCSR_BASE 0x42000000 +#define DC21285_PCI_TYPE_0_CONFIG 0x7b000000 +#define DC21285_PCI_TYPE_1_CONFIG 0x7a000000 +#define DC21285_OUTBOUND_WRITE_FLUSH 0x78000000 +#define DC21285_FLASH 0x41000000 +#define DC21285_PCI_IO 0x7c000000 +#define DC21285_PCI_MEM 0x80000000 + +#ifndef __ASSEMBLY__ +#include +#define DC21285_IO(x) ((volatile unsigned long *)(ARMCSR_BASE+(x))) +#else +#define DC21285_IO(x) (x) +#endif + +#define CSR_PCICMD DC21285_IO(0x0004) +#define CSR_CLASSREV DC21285_IO(0x0008) +#define CSR_PCICACHELINESIZE DC21285_IO(0x000c) +#define CSR_PCICSRBASE DC21285_IO(0x0010) +#define CSR_PCICSRIOBASE DC21285_IO(0x0014) +#define CSR_PCISDRAMBASE DC21285_IO(0x0018) +#define CSR_PCIROMBASE DC21285_IO(0x0030) +#define CSR_MBOX0 DC21285_IO(0x0050) +#define CSR_MBOX1 DC21285_IO(0x0054) +#define CSR_MBOX2 DC21285_IO(0x0058) +#define CSR_MBOX3 DC21285_IO(0x005c) +#define CSR_DOORBELL DC21285_IO(0x0060) +#define CSR_DOORBELL_SETUP DC21285_IO(0x0064) +#define CSR_ROMWRITEREG DC21285_IO(0x0068) +#define CSR_CSRBASEMASK DC21285_IO(0x00f8) +#define CSR_CSRBASEOFFSET DC21285_IO(0x00fc) +#define CSR_SDRAMBASEMASK DC21285_IO(0x0100) +#define CSR_SDRAMBASEOFFSET DC21285_IO(0x0104) +#define CSR_ROMBASEMASK DC21285_IO(0x0108) +#define CSR_SDRAMTIMING DC21285_IO(0x010c) +#define CSR_SDRAMADDRSIZE0 DC21285_IO(0x0110) +#define CSR_SDRAMADDRSIZE1 DC21285_IO(0x0114) +#define CSR_SDRAMADDRSIZE2 DC21285_IO(0x0118) +#define CSR_SDRAMADDRSIZE3 DC21285_IO(0x011c) +#define CSR_I2O_INFREEHEAD DC21285_IO(0x0120) +#define CSR_I2O_INPOSTTAIL DC21285_IO(0x0124) +#define CSR_I2O_OUTPOSTHEAD DC21285_IO(0x0128) +#define CSR_I2O_OUTFREETAIL DC21285_IO(0x012c) +#define CSR_I2O_INFREECOUNT DC21285_IO(0x0130) +#define CSR_I2O_OUTPOSTCOUNT DC21285_IO(0x0134) +#define CSR_I2O_INPOSTCOUNT DC21285_IO(0x0138) +#define CSR_SA110_CNTL DC21285_IO(0x013c) +#define SA110_CNTL_INITCMPLETE (1 << 0) +#define SA110_CNTL_ASSERTSERR (1 << 1) +#define SA110_CNTL_RXSERR (1 << 3) +#define SA110_CNTL_SA110DRAMPARITY (1 << 4) +#define SA110_CNTL_PCISDRAMPARITY (1 << 5) +#define SA110_CNTL_DMASDRAMPARITY (1 << 6) +#define SA110_CNTL_DISCARDTIMER (1 << 8) +#define SA110_CNTL_PCINRESET (1 << 9) +#define SA110_CNTL_I2O_256 (0 << 10) +#define SA110_CNTL_I20_512 (1 << 10) +#define SA110_CNTL_I2O_1024 (2 << 10) +#define SA110_CNTL_I2O_2048 (3 << 10) +#define SA110_CNTL_I2O_4096 (4 << 10) +#define SA110_CNTL_I2O_8192 (5 << 10) +#define SA110_CNTL_I2O_16384 (6 << 10) +#define SA110_CNTL_I2O_32768 (7 << 10) +#define SA110_CNTL_WATCHDOG (1 << 13) +#define SA110_CNTL_ROMWIDTH_UNDEF (0 << 14) +#define SA110_CNTL_ROMWIDTH_16 (1 << 14) +#define SA110_CNTL_ROMWIDTH_32 (2 << 14) +#define SA110_CNTL_ROMWIDTH_8 (3 << 14) +#define SA110_CNTL_ROMACCESSTIME(x) ((x)<<16) +#define SA110_CNTL_ROMBURSTTIME(x) ((x)<<20) +#define SA110_CNTL_ROMTRISTATETIME(x) ((x)<<24) +#define SA110_CNTL_XCSDIR(x) ((x)<<28) +#define SA110_CNTL_PCICFN (1 << 31) + +/* + * footbridge_cfn_mode() is used when we want + * to check whether we are the central function + */ +#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN) +#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN) +#define footbridge_cfn_mode() __footbridge_cfn_mode() +#elif defined(CONFIG_FOOTBRIDGE_HOST) +#define footbridge_cfn_mode() (1) +#else +#define footbridge_cfn_mode() (0) +#endif + +#define CSR_PCIADDR_EXTN DC21285_IO(0x0140) +#define CSR_PREFETCHMEMRANGE DC21285_IO(0x0144) +#define CSR_XBUS_CYCLE DC21285_IO(0x0148) +#define CSR_XBUS_IOSTROBE DC21285_IO(0x014c) +#define CSR_DOORBELL_PCI DC21285_IO(0x0150) +#define CSR_DOORBELL_SA110 DC21285_IO(0x0154) +#define CSR_UARTDR DC21285_IO(0x0160) +#define CSR_RXSTAT DC21285_IO(0x0164) +#define CSR_H_UBRLCR DC21285_IO(0x0168) +#define CSR_M_UBRLCR DC21285_IO(0x016c) +#define CSR_L_UBRLCR DC21285_IO(0x0170) +#define CSR_UARTCON DC21285_IO(0x0174) +#define CSR_UARTFLG DC21285_IO(0x0178) +#define CSR_IRQ_STATUS DC21285_IO(0x0180) +#define CSR_IRQ_RAWSTATUS DC21285_IO(0x0184) +#define CSR_IRQ_ENABLE DC21285_IO(0x0188) +#define CSR_IRQ_DISABLE DC21285_IO(0x018c) +#define CSR_IRQ_SOFT DC21285_IO(0x0190) +#define CSR_FIQ_STATUS DC21285_IO(0x0280) +#define CSR_FIQ_RAWSTATUS DC21285_IO(0x0284) +#define CSR_FIQ_ENABLE DC21285_IO(0x0288) +#define CSR_FIQ_DISABLE DC21285_IO(0x028c) +#define CSR_FIQ_SOFT DC21285_IO(0x0290) +#define CSR_TIMER1_LOAD DC21285_IO(0x0300) +#define CSR_TIMER1_VALUE DC21285_IO(0x0304) +#define CSR_TIMER1_CNTL DC21285_IO(0x0308) +#define CSR_TIMER1_CLR DC21285_IO(0x030c) +#define CSR_TIMER2_LOAD DC21285_IO(0x0320) +#define CSR_TIMER2_VALUE DC21285_IO(0x0324) +#define CSR_TIMER2_CNTL DC21285_IO(0x0328) +#define CSR_TIMER2_CLR DC21285_IO(0x032c) +#define CSR_TIMER3_LOAD DC21285_IO(0x0340) +#define CSR_TIMER3_VALUE DC21285_IO(0x0344) +#define CSR_TIMER3_CNTL DC21285_IO(0x0348) +#define CSR_TIMER3_CLR DC21285_IO(0x034c) +#define CSR_TIMER4_LOAD DC21285_IO(0x0360) +#define CSR_TIMER4_VALUE DC21285_IO(0x0364) +#define CSR_TIMER4_CNTL DC21285_IO(0x0368) +#define CSR_TIMER4_CLR DC21285_IO(0x036c) + +#define TIMER_CNTL_ENABLE (1 << 7) +#define TIMER_CNTL_AUTORELOAD (1 << 6) +#define TIMER_CNTL_DIV1 (0) +#define TIMER_CNTL_DIV16 (1 << 2) +#define TIMER_CNTL_DIV256 (2 << 2) +#define TIMER_CNTL_CNTEXT (3 << 2) + + diff --git a/arch/arm/include/asm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S new file mode 100644 index 000000000000..e0af4983723f --- /dev/null +++ b/arch/arm/include/asm/hardware/entry-macro-iomd.S @@ -0,0 +1,139 @@ +/* + * arch/arm/include/asm/hardware/entry-macro-iomd.S + * + * Low-level IRQ helper macros for IOC/IOMD based platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* IOC / IOMD based hardware */ +#include + + .macro disable_fiq + mov r12, #ioc_base_high + .if ioc_base_low + orr r12, r12, #ioc_base_low + .endif + strb r12, [r12, #0x38] @ Disable FIQ register + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldrb \irqstat, [\base, #IOMD_IRQREQB] @ get high priority first + ldr \tmp, =irq_prio_h + teq \irqstat, #0 +#ifdef IOMD_BASE + ldreqb \irqstat, [\base, #IOMD_DMAREQ] @ get dma + addeq \tmp, \tmp, #256 @ irq_prio_h table size + teqeq \irqstat, #0 + bne 2406f +#endif + ldreqb \irqstat, [\base, #IOMD_IRQREQA] @ get low priority + addeq \tmp, \tmp, #256 @ irq_prio_d table size + teqeq \irqstat, #0 +#ifdef IOMD_IRQREQC + ldreqb \irqstat, [\base, #IOMD_IRQREQC] + addeq \tmp, \tmp, #256 @ irq_prio_l table size + teqeq \irqstat, #0 +#endif +#ifdef IOMD_IRQREQD + ldreqb \irqstat, [\base, #IOMD_IRQREQD] + addeq \tmp, \tmp, #256 @ irq_prio_lc table size + teqeq \irqstat, #0 +#endif +2406: ldrneb \irqnr, [\tmp, \irqstat] @ get IRQ number + .endm + +/* + * Interrupt table (incorporates priority). Please note that we + * rely on the order of these tables (see above code). + */ + .align 5 +irq_prio_h: .byte 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 +#ifdef IOMD_BASE +irq_prio_d: .byte 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 +#endif +irq_prio_l: .byte 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 + .byte 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 + .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 + .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 + .byte 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3 + .byte 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3 + .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 + .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 +#ifdef IOMD_IRQREQC +irq_prio_lc: .byte 24,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27 + .byte 28,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27 + .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 + .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 + .byte 30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27 + .byte 30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27 + .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 + .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 +#endif +#ifdef IOMD_IRQREQD +irq_prio_ld: .byte 40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43 + .byte 44,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43 + .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 + .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 + .byte 46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43 + .byte 46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43 + .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 + .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 +#endif + diff --git a/arch/arm/include/asm/hardware/ep7211.h b/arch/arm/include/asm/hardware/ep7211.h new file mode 100644 index 000000000000..654d5f625c49 --- /dev/null +++ b/arch/arm/include/asm/hardware/ep7211.h @@ -0,0 +1,40 @@ +/* + * arch/arm/include/asm/hardware/ep7211.h + * + * This file contains the hardware definitions of the EP7211 internal + * registers. + * + * Copyright (C) 2001 Blue Mug, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_HARDWARE_EP7211_H +#define __ASM_HARDWARE_EP7211_H + +#include + +/* + * define EP7211_BASE to be the base address of the region + * you want to access. + */ + +#define EP7211_PHYS_BASE (0x80000000) + +/* + * XXX miket@bluemug.com: need to introduce EP7211 registers (those not + * present in 7212) here. + */ + +#endif /* __ASM_HARDWARE_EP7211_H */ diff --git a/arch/arm/include/asm/hardware/ep7212.h b/arch/arm/include/asm/hardware/ep7212.h new file mode 100644 index 000000000000..3b43bbeaf1db --- /dev/null +++ b/arch/arm/include/asm/hardware/ep7212.h @@ -0,0 +1,83 @@ +/* + * arch/arm/include/asm/hardware/ep7212.h + * + * This file contains the hardware definitions of the EP7212 internal + * registers. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_HARDWARE_EP7212_H +#define __ASM_HARDWARE_EP7212_H + +/* + * define EP7212_BASE to be the base address of the region + * you want to access. + */ + +#define EP7212_PHYS_BASE (0x80000000) + +#ifndef __ASSEMBLY__ +#define ep_readl(off) __raw_readl(EP7212_BASE + (off)) +#define ep_writel(val,off) __raw_writel(val, EP7212_BASE + (off)) +#endif + +/* + * These registers are specific to the EP7212 only + */ +#define DAIR 0x2000 +#define DAIR0 0x2040 +#define DAIDR1 0x2080 +#define DAIDR2 0x20c0 +#define DAISR 0x2100 +#define SYSCON3 0x2200 +#define INTSR3 0x2240 +#define INTMR3 0x2280 +#define LEDFLSH 0x22c0 + +#define DAIR_DAIEN (1 << 16) +#define DAIR_ECS (1 << 17) +#define DAIR_LCTM (1 << 19) +#define DAIR_LCRM (1 << 20) +#define DAIR_RCTM (1 << 21) +#define DAIR_RCRM (1 << 22) +#define DAIR_LBM (1 << 23) + +#define DAIDR2_FIFOEN (1 << 15) +#define DAIDR2_FIFOLEFT (0x0d << 16) +#define DAIDR2_FIFORIGHT (0x11 << 16) + +#define DAISR_RCTS (1 << 0) +#define DAISR_RCRS (1 << 1) +#define DAISR_LCTS (1 << 2) +#define DAISR_LCRS (1 << 3) +#define DAISR_RCTU (1 << 4) +#define DAISR_RCRO (1 << 5) +#define DAISR_LCTU (1 << 6) +#define DAISR_LCRO (1 << 7) +#define DAISR_RCNF (1 << 8) +#define DAISR_RCNE (1 << 9) +#define DAISR_LCNF (1 << 10) +#define DAISR_LCNE (1 << 11) +#define DAISR_FIFO (1 << 12) + +#define SYSCON3_ADCCON (1 << 0) +#define SYSCON3_DAISEL (1 << 3) +#define SYSCON3_ADCCKNSEN (1 << 4) +#define SYSCON3_FASTWAKE (1 << 8) +#define SYSCON3_DAIEN (1 << 9) + +#endif /* __ASM_HARDWARE_EP7212_H */ diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h new file mode 100644 index 000000000000..4924914af188 --- /dev/null +++ b/arch/arm/include/asm/hardware/gic.h @@ -0,0 +1,42 @@ +/* + * arch/arm/include/asm/hardware/gic.h + * + * Copyright (C) 2002 ARM Limited, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_HARDWARE_GIC_H +#define __ASM_ARM_HARDWARE_GIC_H + +#include + +#define GIC_CPU_CTRL 0x00 +#define GIC_CPU_PRIMASK 0x04 +#define GIC_CPU_BINPOINT 0x08 +#define GIC_CPU_INTACK 0x0c +#define GIC_CPU_EOI 0x10 +#define GIC_CPU_RUNNINGPRI 0x14 +#define GIC_CPU_HIGHPRI 0x18 + +#define GIC_DIST_CTRL 0x000 +#define GIC_DIST_CTR 0x004 +#define GIC_DIST_ENABLE_SET 0x100 +#define GIC_DIST_ENABLE_CLEAR 0x180 +#define GIC_DIST_PENDING_SET 0x200 +#define GIC_DIST_PENDING_CLEAR 0x280 +#define GIC_DIST_ACTIVE_BIT 0x300 +#define GIC_DIST_PRI 0x400 +#define GIC_DIST_TARGET 0x800 +#define GIC_DIST_CONFIG 0xc00 +#define GIC_DIST_SOFTINT 0xf00 + +#ifndef __ASSEMBLY__ +void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start); +void gic_cpu_init(unsigned int gic_nr, void __iomem *base); +void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); +void gic_raise_softirq(cpumask_t cpumask, unsigned int irq); +#endif + +#endif diff --git a/arch/arm/include/asm/hardware/icst307.h b/arch/arm/include/asm/hardware/icst307.h new file mode 100644 index 000000000000..554f128a1046 --- /dev/null +++ b/arch/arm/include/asm/hardware/icst307.h @@ -0,0 +1,38 @@ +/* + * arch/arm/include/asm/hardware/icst307.h + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Support functions for calculating clocks/divisors for the ICS307 + * clock generators. See http://www.icst.com/ for more information + * on these devices. + * + * This file is similar to the icst525.h file + */ +#ifndef ASMARM_HARDWARE_ICST307_H +#define ASMARM_HARDWARE_ICST307_H + +struct icst307_params { + unsigned long ref; + unsigned long vco_max; /* inclusive */ + unsigned short vd_min; /* inclusive */ + unsigned short vd_max; /* inclusive */ + unsigned char rd_min; /* inclusive */ + unsigned char rd_max; /* inclusive */ +}; + +struct icst307_vco { + unsigned short v; + unsigned char r; + unsigned char s; +}; + +unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco); +struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq); +struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period); + +#endif diff --git a/arch/arm/include/asm/hardware/icst525.h b/arch/arm/include/asm/hardware/icst525.h new file mode 100644 index 000000000000..58f0dc43e2ed --- /dev/null +++ b/arch/arm/include/asm/hardware/icst525.h @@ -0,0 +1,36 @@ +/* + * arch/arm/include/asm/hardware/icst525.h + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Support functions for calculating clocks/divisors for the ICST525 + * clock generators. See http://www.icst.com/ for more information + * on these devices. + */ +#ifndef ASMARM_HARDWARE_ICST525_H +#define ASMARM_HARDWARE_ICST525_H + +struct icst525_params { + unsigned long ref; + unsigned long vco_max; /* inclusive */ + unsigned short vd_min; /* inclusive */ + unsigned short vd_max; /* inclusive */ + unsigned char rd_min; /* inclusive */ + unsigned char rd_max; /* inclusive */ +}; + +struct icst525_vco { + unsigned short v; + unsigned char r; + unsigned char s; +}; + +unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco); +struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq); +struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period); + +#endif diff --git a/arch/arm/include/asm/hardware/ioc.h b/arch/arm/include/asm/hardware/ioc.h new file mode 100644 index 000000000000..1f6b8013becb --- /dev/null +++ b/arch/arm/include/asm/hardware/ioc.h @@ -0,0 +1,72 @@ +/* + * arch/arm/include/asm/hardware/ioc.h + * + * Copyright (C) Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Use these macros to read/write the IOC. All it does is perform the actual + * read/write. + */ +#ifndef __ASMARM_HARDWARE_IOC_H +#define __ASMARM_HARDWARE_IOC_H + +#ifndef __ASSEMBLY__ + +/* + * We use __raw_base variants here so that we give the compiler the + * chance to keep IOC_BASE in a register. + */ +#define ioc_readb(off) __raw_readb(IOC_BASE + (off)) +#define ioc_writeb(val,off) __raw_writeb(val, IOC_BASE + (off)) + +#endif + +#define IOC_CONTROL (0x00) +#define IOC_KARTTX (0x04) +#define IOC_KARTRX (0x04) + +#define IOC_IRQSTATA (0x10) +#define IOC_IRQREQA (0x14) +#define IOC_IRQCLRA (0x14) +#define IOC_IRQMASKA (0x18) + +#define IOC_IRQSTATB (0x20) +#define IOC_IRQREQB (0x24) +#define IOC_IRQMASKB (0x28) + +#define IOC_FIQSTAT (0x30) +#define IOC_FIQREQ (0x34) +#define IOC_FIQMASK (0x38) + +#define IOC_T0CNTL (0x40) +#define IOC_T0LTCHL (0x40) +#define IOC_T0CNTH (0x44) +#define IOC_T0LTCHH (0x44) +#define IOC_T0GO (0x48) +#define IOC_T0LATCH (0x4c) + +#define IOC_T1CNTL (0x50) +#define IOC_T1LTCHL (0x50) +#define IOC_T1CNTH (0x54) +#define IOC_T1LTCHH (0x54) +#define IOC_T1GO (0x58) +#define IOC_T1LATCH (0x5c) + +#define IOC_T2CNTL (0x60) +#define IOC_T2LTCHL (0x60) +#define IOC_T2CNTH (0x64) +#define IOC_T2LTCHH (0x64) +#define IOC_T2GO (0x68) +#define IOC_T2LATCH (0x6c) + +#define IOC_T3CNTL (0x70) +#define IOC_T3LTCHL (0x70) +#define IOC_T3CNTH (0x74) +#define IOC_T3LTCHH (0x74) +#define IOC_T3GO (0x78) +#define IOC_T3LATCH (0x7c) + +#endif diff --git a/arch/arm/include/asm/hardware/iomd.h b/arch/arm/include/asm/hardware/iomd.h new file mode 100644 index 000000000000..9c5afbd71a69 --- /dev/null +++ b/arch/arm/include/asm/hardware/iomd.h @@ -0,0 +1,226 @@ +/* + * arch/arm/include/asm/hardware/iomd.h + * + * Copyright (C) 1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains information out the IOMD ASIC used in the + * Acorn RiscPC and subsequently integrated into the CLPS7500 chips. + */ +#ifndef __ASMARM_HARDWARE_IOMD_H +#define __ASMARM_HARDWARE_IOMD_H + + +#ifndef __ASSEMBLY__ + +/* + * We use __raw_base variants here so that we give the compiler the + * chance to keep IOC_BASE in a register. + */ +#define iomd_readb(off) __raw_readb(IOMD_BASE + (off)) +#define iomd_readl(off) __raw_readl(IOMD_BASE + (off)) +#define iomd_writeb(val,off) __raw_writeb(val, IOMD_BASE + (off)) +#define iomd_writel(val,off) __raw_writel(val, IOMD_BASE + (off)) + +#endif + +#define IOMD_CONTROL (0x000) +#define IOMD_KARTTX (0x004) +#define IOMD_KARTRX (0x004) +#define IOMD_KCTRL (0x008) + +#ifdef CONFIG_ARCH_CLPS7500 +#define IOMD_IOLINES (0x00C) +#endif + +#define IOMD_IRQSTATA (0x010) +#define IOMD_IRQREQA (0x014) +#define IOMD_IRQCLRA (0x014) +#define IOMD_IRQMASKA (0x018) + +#ifdef CONFIG_ARCH_CLPS7500 +#define IOMD_SUSMODE (0x01C) +#endif + +#define IOMD_IRQSTATB (0x020) +#define IOMD_IRQREQB (0x024) +#define IOMD_IRQMASKB (0x028) + +#define IOMD_FIQSTAT (0x030) +#define IOMD_FIQREQ (0x034) +#define IOMD_FIQMASK (0x038) + +#ifdef CONFIG_ARCH_CLPS7500 +#define IOMD_CLKCTL (0x03C) +#endif + +#define IOMD_T0CNTL (0x040) +#define IOMD_T0LTCHL (0x040) +#define IOMD_T0CNTH (0x044) +#define IOMD_T0LTCHH (0x044) +#define IOMD_T0GO (0x048) +#define IOMD_T0LATCH (0x04c) + +#define IOMD_T1CNTL (0x050) +#define IOMD_T1LTCHL (0x050) +#define IOMD_T1CNTH (0x054) +#define IOMD_T1LTCHH (0x054) +#define IOMD_T1GO (0x058) +#define IOMD_T1LATCH (0x05c) + +#ifdef CONFIG_ARCH_CLPS7500 +#define IOMD_IRQSTATC (0x060) +#define IOMD_IRQREQC (0x064) +#define IOMD_IRQMASKC (0x068) + +#define IOMD_VIDMUX (0x06c) + +#define IOMD_IRQSTATD (0x070) +#define IOMD_IRQREQD (0x074) +#define IOMD_IRQMASKD (0x078) +#endif + +#define IOMD_ROMCR0 (0x080) +#define IOMD_ROMCR1 (0x084) +#ifdef CONFIG_ARCH_RPC +#define IOMD_DRAMCR (0x088) +#endif +#define IOMD_REFCR (0x08C) + +#define IOMD_FSIZE (0x090) +#define IOMD_ID0 (0x094) +#define IOMD_ID1 (0x098) +#define IOMD_VERSION (0x09C) + +#ifdef CONFIG_ARCH_RPC +#define IOMD_MOUSEX (0x0A0) +#define IOMD_MOUSEY (0x0A4) +#endif + +#ifdef CONFIG_ARCH_CLPS7500 +#define IOMD_MSEDAT (0x0A8) +#define IOMD_MSECTL (0x0Ac) +#endif + +#ifdef CONFIG_ARCH_RPC +#define IOMD_DMATCR (0x0C0) +#endif +#define IOMD_IOTCR (0x0C4) +#define IOMD_ECTCR (0x0C8) +#ifdef CONFIG_ARCH_RPC +#define IOMD_DMAEXT (0x0CC) +#endif +#ifdef CONFIG_ARCH_CLPS7500 +#define IOMD_ASTCR (0x0CC) +#define IOMD_DRAMCR (0x0D0) +#define IOMD_SELFREF (0x0D4) +#define IOMD_ATODICR (0x0E0) +#define IOMD_ATODSR (0x0E4) +#define IOMD_ATODCC (0x0E8) +#define IOMD_ATODCNT1 (0x0EC) +#define IOMD_ATODCNT2 (0x0F0) +#define IOMD_ATODCNT3 (0x0F4) +#define IOMD_ATODCNT4 (0x0F8) +#endif + +#ifdef CONFIG_ARCH_RPC +#define DMA_EXT_IO0 1 +#define DMA_EXT_IO1 2 +#define DMA_EXT_IO2 4 +#define DMA_EXT_IO3 8 + +#define IOMD_IO0CURA (0x100) +#define IOMD_IO0ENDA (0x104) +#define IOMD_IO0CURB (0x108) +#define IOMD_IO0ENDB (0x10C) +#define IOMD_IO0CR (0x110) +#define IOMD_IO0ST (0x114) + +#define IOMD_IO1CURA (0x120) +#define IOMD_IO1ENDA (0x124) +#define IOMD_IO1CURB (0x128) +#define IOMD_IO1ENDB (0x12C) +#define IOMD_IO1CR (0x130) +#define IOMD_IO1ST (0x134) + +#define IOMD_IO2CURA (0x140) +#define IOMD_IO2ENDA (0x144) +#define IOMD_IO2CURB (0x148) +#define IOMD_IO2ENDB (0x14C) +#define IOMD_IO2CR (0x150) +#define IOMD_IO2ST (0x154) + +#define IOMD_IO3CURA (0x160) +#define IOMD_IO3ENDA (0x164) +#define IOMD_IO3CURB (0x168) +#define IOMD_IO3ENDB (0x16C) +#define IOMD_IO3CR (0x170) +#define IOMD_IO3ST (0x174) +#endif + +#define IOMD_SD0CURA (0x180) +#define IOMD_SD0ENDA (0x184) +#define IOMD_SD0CURB (0x188) +#define IOMD_SD0ENDB (0x18C) +#define IOMD_SD0CR (0x190) +#define IOMD_SD0ST (0x194) + +#ifdef CONFIG_ARCH_RPC +#define IOMD_SD1CURA (0x1A0) +#define IOMD_SD1ENDA (0x1A4) +#define IOMD_SD1CURB (0x1A8) +#define IOMD_SD1ENDB (0x1AC) +#define IOMD_SD1CR (0x1B0) +#define IOMD_SD1ST (0x1B4) +#endif + +#define IOMD_CURSCUR (0x1C0) +#define IOMD_CURSINIT (0x1C4) + +#define IOMD_VIDCUR (0x1D0) +#define IOMD_VIDEND (0x1D4) +#define IOMD_VIDSTART (0x1D8) +#define IOMD_VIDINIT (0x1DC) +#define IOMD_VIDCR (0x1E0) + +#define IOMD_DMASTAT (0x1F0) +#define IOMD_DMAREQ (0x1F4) +#define IOMD_DMAMASK (0x1F8) + +#define DMA_END_S (1 << 31) +#define DMA_END_L (1 << 30) + +#define DMA_CR_C 0x80 +#define DMA_CR_D 0x40 +#define DMA_CR_E 0x20 + +#define DMA_ST_OFL 4 +#define DMA_ST_INT 2 +#define DMA_ST_AB 1 + +/* + * DMA (MEMC) compatibility + */ +#define HALF_SAM vram_half_sam +#define VDMA_ALIGNMENT (HALF_SAM * 2) +#define VDMA_XFERSIZE (HALF_SAM) +#define VDMA_INIT IOMD_VIDINIT +#define VDMA_START IOMD_VIDSTART +#define VDMA_END IOMD_VIDEND + +#ifndef __ASSEMBLY__ +extern unsigned int vram_half_sam; +#define video_set_dma(start,end,offset) \ +do { \ + outl (SCREEN_START + start, VDMA_START); \ + outl (SCREEN_START + end - VDMA_XFERSIZE, VDMA_END); \ + if (offset >= end - VDMA_XFERSIZE) \ + offset |= 0x40000000; \ + outl (SCREEN_START + offset, VDMA_INIT); \ +} while (0) +#endif + +#endif diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h new file mode 100644 index 000000000000..af64676650a2 --- /dev/null +++ b/arch/arm/include/asm/hardware/iop3xx-adma.h @@ -0,0 +1,888 @@ +/* + * Copyright © 2006, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ +#ifndef _ADMA_H +#define _ADMA_H +#include +#include +#include +#include + +/* Memory copy units */ +#define DMA_CCR(chan) (chan->mmr_base + 0x0) +#define DMA_CSR(chan) (chan->mmr_base + 0x4) +#define DMA_DAR(chan) (chan->mmr_base + 0xc) +#define DMA_NDAR(chan) (chan->mmr_base + 0x10) +#define DMA_PADR(chan) (chan->mmr_base + 0x14) +#define DMA_PUADR(chan) (chan->mmr_base + 0x18) +#define DMA_LADR(chan) (chan->mmr_base + 0x1c) +#define DMA_BCR(chan) (chan->mmr_base + 0x20) +#define DMA_DCR(chan) (chan->mmr_base + 0x24) + +/* Application accelerator unit */ +#define AAU_ACR(chan) (chan->mmr_base + 0x0) +#define AAU_ASR(chan) (chan->mmr_base + 0x4) +#define AAU_ADAR(chan) (chan->mmr_base + 0x8) +#define AAU_ANDAR(chan) (chan->mmr_base + 0xc) +#define AAU_SAR(src, chan) (chan->mmr_base + (0x10 + ((src) << 2))) +#define AAU_DAR(chan) (chan->mmr_base + 0x20) +#define AAU_ABCR(chan) (chan->mmr_base + 0x24) +#define AAU_ADCR(chan) (chan->mmr_base + 0x28) +#define AAU_SAR_EDCR(src_edc) (chan->mmr_base + (0x02c + ((src_edc-4) << 2))) +#define AAU_EDCR0_IDX 8 +#define AAU_EDCR1_IDX 17 +#define AAU_EDCR2_IDX 26 + +#define DMA0_ID 0 +#define DMA1_ID 1 +#define AAU_ID 2 + +struct iop3xx_aau_desc_ctrl { + unsigned int int_en:1; + unsigned int blk1_cmd_ctrl:3; + unsigned int blk2_cmd_ctrl:3; + unsigned int blk3_cmd_ctrl:3; + unsigned int blk4_cmd_ctrl:3; + unsigned int blk5_cmd_ctrl:3; + unsigned int blk6_cmd_ctrl:3; + unsigned int blk7_cmd_ctrl:3; + unsigned int blk8_cmd_ctrl:3; + unsigned int blk_ctrl:2; + unsigned int dual_xor_en:1; + unsigned int tx_complete:1; + unsigned int zero_result_err:1; + unsigned int zero_result_en:1; + unsigned int dest_write_en:1; +}; + +struct iop3xx_aau_e_desc_ctrl { + unsigned int reserved:1; + unsigned int blk1_cmd_ctrl:3; + unsigned int blk2_cmd_ctrl:3; + unsigned int blk3_cmd_ctrl:3; + unsigned int blk4_cmd_ctrl:3; + unsigned int blk5_cmd_ctrl:3; + unsigned int blk6_cmd_ctrl:3; + unsigned int blk7_cmd_ctrl:3; + unsigned int blk8_cmd_ctrl:3; + unsigned int reserved2:7; +}; + +struct iop3xx_dma_desc_ctrl { + unsigned int pci_transaction:4; + unsigned int int_en:1; + unsigned int dac_cycle_en:1; + unsigned int mem_to_mem_en:1; + unsigned int crc_data_tx_en:1; + unsigned int crc_gen_en:1; + unsigned int crc_seed_dis:1; + unsigned int reserved:21; + unsigned int crc_tx_complete:1; +}; + +struct iop3xx_desc_dma { + u32 next_desc; + union { + u32 pci_src_addr; + u32 pci_dest_addr; + u32 src_addr; + }; + union { + u32 upper_pci_src_addr; + u32 upper_pci_dest_addr; + }; + union { + u32 local_pci_src_addr; + u32 local_pci_dest_addr; + u32 dest_addr; + }; + u32 byte_count; + union { + u32 desc_ctrl; + struct iop3xx_dma_desc_ctrl desc_ctrl_field; + }; + u32 crc_addr; +}; + +struct iop3xx_desc_aau { + u32 next_desc; + u32 src[4]; + u32 dest_addr; + u32 byte_count; + union { + u32 desc_ctrl; + struct iop3xx_aau_desc_ctrl desc_ctrl_field; + }; + union { + u32 src_addr; + u32 e_desc_ctrl; + struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field; + } src_edc[31]; +}; + +struct iop3xx_aau_gfmr { + unsigned int gfmr1:8; + unsigned int gfmr2:8; + unsigned int gfmr3:8; + unsigned int gfmr4:8; +}; + +struct iop3xx_desc_pq_xor { + u32 next_desc; + u32 src[3]; + union { + u32 data_mult1; + struct iop3xx_aau_gfmr data_mult1_field; + }; + u32 dest_addr; + u32 byte_count; + union { + u32 desc_ctrl; + struct iop3xx_aau_desc_ctrl desc_ctrl_field; + }; + union { + u32 src_addr; + u32 e_desc_ctrl; + struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field; + u32 data_multiplier; + struct iop3xx_aau_gfmr data_mult_field; + u32 reserved; + } src_edc_gfmr[19]; +}; + +struct iop3xx_desc_dual_xor { + u32 next_desc; + u32 src0_addr; + u32 src1_addr; + u32 h_src_addr; + u32 d_src_addr; + u32 h_dest_addr; + u32 byte_count; + union { + u32 desc_ctrl; + struct iop3xx_aau_desc_ctrl desc_ctrl_field; + }; + u32 d_dest_addr; +}; + +union iop3xx_desc { + struct iop3xx_desc_aau *aau; + struct iop3xx_desc_dma *dma; + struct iop3xx_desc_pq_xor *pq_xor; + struct iop3xx_desc_dual_xor *dual_xor; + void *ptr; +}; + +static inline int iop_adma_get_max_xor(void) +{ + return 32; +} + +static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan) +{ + int id = chan->device->id; + + switch (id) { + case DMA0_ID: + case DMA1_ID: + return __raw_readl(DMA_DAR(chan)); + case AAU_ID: + return __raw_readl(AAU_ADAR(chan)); + default: + BUG(); + } + return 0; +} + +static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan, + u32 next_desc_addr) +{ + int id = chan->device->id; + + switch (id) { + case DMA0_ID: + case DMA1_ID: + __raw_writel(next_desc_addr, DMA_NDAR(chan)); + break; + case AAU_ID: + __raw_writel(next_desc_addr, AAU_ANDAR(chan)); + break; + } + +} + +#define IOP_ADMA_STATUS_BUSY (1 << 10) +#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT (1024) +#define IOP_ADMA_XOR_MAX_BYTE_COUNT (16 * 1024 * 1024) +#define IOP_ADMA_MAX_BYTE_COUNT (16 * 1024 * 1024) + +static inline int iop_chan_is_busy(struct iop_adma_chan *chan) +{ + u32 status = __raw_readl(DMA_CSR(chan)); + return (status & IOP_ADMA_STATUS_BUSY) ? 1 : 0; +} + +static inline int iop_desc_is_aligned(struct iop_adma_desc_slot *desc, + int num_slots) +{ + /* num_slots will only ever be 1, 2, 4, or 8 */ + return (desc->idx & (num_slots - 1)) ? 0 : 1; +} + +/* to do: support large (i.e. > hw max) buffer sizes */ +static inline int iop_chan_memcpy_slot_count(size_t len, int *slots_per_op) +{ + *slots_per_op = 1; + return 1; +} + +/* to do: support large (i.e. > hw max) buffer sizes */ +static inline int iop_chan_memset_slot_count(size_t len, int *slots_per_op) +{ + *slots_per_op = 1; + return 1; +} + +static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt, + int *slots_per_op) +{ + static const char slot_count_table[] = { + 1, 1, 1, 1, /* 01 - 04 */ + 2, 2, 2, 2, /* 05 - 08 */ + 4, 4, 4, 4, /* 09 - 12 */ + 4, 4, 4, 4, /* 13 - 16 */ + 8, 8, 8, 8, /* 17 - 20 */ + 8, 8, 8, 8, /* 21 - 24 */ + 8, 8, 8, 8, /* 25 - 28 */ + 8, 8, 8, 8, /* 29 - 32 */ + }; + *slots_per_op = slot_count_table[src_cnt - 1]; + return *slots_per_op; +} + +static inline int +iop_chan_interrupt_slot_count(int *slots_per_op, struct iop_adma_chan *chan) +{ + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + return iop_chan_memcpy_slot_count(0, slots_per_op); + case AAU_ID: + return iop3xx_aau_xor_slot_count(0, 2, slots_per_op); + default: + BUG(); + } + return 0; +} + +static inline int iop_chan_xor_slot_count(size_t len, int src_cnt, + int *slots_per_op) +{ + int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op); + + if (len <= IOP_ADMA_XOR_MAX_BYTE_COUNT) + return slot_cnt; + + len -= IOP_ADMA_XOR_MAX_BYTE_COUNT; + while (len > IOP_ADMA_XOR_MAX_BYTE_COUNT) { + len -= IOP_ADMA_XOR_MAX_BYTE_COUNT; + slot_cnt += *slots_per_op; + } + + if (len) + slot_cnt += *slots_per_op; + + return slot_cnt; +} + +/* zero sum on iop3xx is limited to 1k at a time so it requires multiple + * descriptors + */ +static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt, + int *slots_per_op) +{ + int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op); + + if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) + return slot_cnt; + + len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; + while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) { + len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; + slot_cnt += *slots_per_op; + } + + if (len) + slot_cnt += *slots_per_op; + + return slot_cnt; +} + +static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc, + struct iop_adma_chan *chan) +{ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + return hw_desc.dma->dest_addr; + case AAU_ID: + return hw_desc.aau->dest_addr; + default: + BUG(); + } + return 0; +} + +static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc, + struct iop_adma_chan *chan) +{ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + return hw_desc.dma->byte_count; + case AAU_ID: + return hw_desc.aau->byte_count; + default: + BUG(); + } + return 0; +} + +/* translate the src_idx to a descriptor word index */ +static inline int __desc_idx(int src_idx) +{ + static const int desc_idx_table[] = { 0, 0, 0, 0, + 0, 1, 2, 3, + 5, 6, 7, 8, + 9, 10, 11, 12, + 14, 15, 16, 17, + 18, 19, 20, 21, + 23, 24, 25, 26, + 27, 28, 29, 30, + }; + + return desc_idx_table[src_idx]; +} + +static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc, + struct iop_adma_chan *chan, + int src_idx) +{ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + return hw_desc.dma->src_addr; + case AAU_ID: + break; + default: + BUG(); + } + + if (src_idx < 4) + return hw_desc.aau->src[src_idx]; + else + return hw_desc.aau->src_edc[__desc_idx(src_idx)].src_addr; +} + +static inline void iop3xx_aau_desc_set_src_addr(struct iop3xx_desc_aau *hw_desc, + int src_idx, dma_addr_t addr) +{ + if (src_idx < 4) + hw_desc->src[src_idx] = addr; + else + hw_desc->src_edc[__desc_idx(src_idx)].src_addr = addr; +} + +static inline void +iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags) +{ + struct iop3xx_desc_dma *hw_desc = desc->hw_desc; + union { + u32 value; + struct iop3xx_dma_desc_ctrl field; + } u_desc_ctrl; + + u_desc_ctrl.value = 0; + u_desc_ctrl.field.mem_to_mem_en = 1; + u_desc_ctrl.field.pci_transaction = 0xe; /* memory read block */ + u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; + hw_desc->desc_ctrl = u_desc_ctrl.value; + hw_desc->upper_pci_src_addr = 0; + hw_desc->crc_addr = 0; +} + +static inline void +iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags) +{ + struct iop3xx_desc_aau *hw_desc = desc->hw_desc; + union { + u32 value; + struct iop3xx_aau_desc_ctrl field; + } u_desc_ctrl; + + u_desc_ctrl.value = 0; + u_desc_ctrl.field.blk1_cmd_ctrl = 0x2; /* memory block fill */ + u_desc_ctrl.field.dest_write_en = 1; + u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; + hw_desc->desc_ctrl = u_desc_ctrl.value; +} + +static inline u32 +iop3xx_desc_init_xor(struct iop3xx_desc_aau *hw_desc, int src_cnt, + unsigned long flags) +{ + int i, shift; + u32 edcr; + union { + u32 value; + struct iop3xx_aau_desc_ctrl field; + } u_desc_ctrl; + + u_desc_ctrl.value = 0; + switch (src_cnt) { + case 25 ... 32: + u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ + edcr = 0; + shift = 1; + for (i = 24; i < src_cnt; i++) { + edcr |= (1 << shift); + shift += 3; + } + hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = edcr; + src_cnt = 24; + /* fall through */ + case 17 ... 24: + if (!u_desc_ctrl.field.blk_ctrl) { + hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0; + u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ + } + edcr = 0; + shift = 1; + for (i = 16; i < src_cnt; i++) { + edcr |= (1 << shift); + shift += 3; + } + hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = edcr; + src_cnt = 16; + /* fall through */ + case 9 ... 16: + if (!u_desc_ctrl.field.blk_ctrl) + u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */ + edcr = 0; + shift = 1; + for (i = 8; i < src_cnt; i++) { + edcr |= (1 << shift); + shift += 3; + } + hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = edcr; + src_cnt = 8; + /* fall through */ + case 2 ... 8: + shift = 1; + for (i = 0; i < src_cnt; i++) { + u_desc_ctrl.value |= (1 << shift); + shift += 3; + } + + if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4) + u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */ + } + + u_desc_ctrl.field.dest_write_en = 1; + u_desc_ctrl.field.blk1_cmd_ctrl = 0x7; /* direct fill */ + u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; + hw_desc->desc_ctrl = u_desc_ctrl.value; + + return u_desc_ctrl.value; +} + +static inline void +iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt, + unsigned long flags) +{ + iop3xx_desc_init_xor(desc->hw_desc, src_cnt, flags); +} + +/* return the number of operations */ +static inline int +iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt, + unsigned long flags) +{ + int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op; + struct iop3xx_desc_aau *hw_desc, *prev_hw_desc, *iter; + union { + u32 value; + struct iop3xx_aau_desc_ctrl field; + } u_desc_ctrl; + int i, j; + + hw_desc = desc->hw_desc; + + for (i = 0, j = 0; (slot_cnt -= slots_per_op) >= 0; + i += slots_per_op, j++) { + iter = iop_hw_desc_slot_idx(hw_desc, i); + u_desc_ctrl.value = iop3xx_desc_init_xor(iter, src_cnt, flags); + u_desc_ctrl.field.dest_write_en = 0; + u_desc_ctrl.field.zero_result_en = 1; + u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; + iter->desc_ctrl = u_desc_ctrl.value; + + /* for the subsequent descriptors preserve the store queue + * and chain them together + */ + if (i) { + prev_hw_desc = + iop_hw_desc_slot_idx(hw_desc, i - slots_per_op); + prev_hw_desc->next_desc = + (u32) (desc->async_tx.phys + (i << 5)); + } + } + + return j; +} + +static inline void +iop_desc_init_null_xor(struct iop_adma_desc_slot *desc, int src_cnt, + unsigned long flags) +{ + struct iop3xx_desc_aau *hw_desc = desc->hw_desc; + union { + u32 value; + struct iop3xx_aau_desc_ctrl field; + } u_desc_ctrl; + + u_desc_ctrl.value = 0; + switch (src_cnt) { + case 25 ... 32: + u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ + hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0; + /* fall through */ + case 17 ... 24: + if (!u_desc_ctrl.field.blk_ctrl) { + hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0; + u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ + } + hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = 0; + /* fall through */ + case 9 ... 16: + if (!u_desc_ctrl.field.blk_ctrl) + u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */ + hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = 0; + /* fall through */ + case 1 ... 8: + if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4) + u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */ + } + + u_desc_ctrl.field.dest_write_en = 0; + u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; + hw_desc->desc_ctrl = u_desc_ctrl.value; +} + +static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc, + struct iop_adma_chan *chan, + u32 byte_count) +{ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + hw_desc.dma->byte_count = byte_count; + break; + case AAU_ID: + hw_desc.aau->byte_count = byte_count; + break; + default: + BUG(); + } +} + +static inline void +iop_desc_init_interrupt(struct iop_adma_desc_slot *desc, + struct iop_adma_chan *chan) +{ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + iop_desc_init_memcpy(desc, 1); + hw_desc.dma->byte_count = 0; + hw_desc.dma->dest_addr = 0; + hw_desc.dma->src_addr = 0; + break; + case AAU_ID: + iop_desc_init_null_xor(desc, 2, 1); + hw_desc.aau->byte_count = 0; + hw_desc.aau->dest_addr = 0; + hw_desc.aau->src[0] = 0; + hw_desc.aau->src[1] = 0; + break; + default: + BUG(); + } +} + +static inline void +iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len) +{ + int slots_per_op = desc->slots_per_op; + struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter; + int i = 0; + + if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) { + hw_desc->byte_count = len; + } else { + do { + iter = iop_hw_desc_slot_idx(hw_desc, i); + iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; + len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; + i += slots_per_op; + } while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT); + + if (len) { + iter = iop_hw_desc_slot_idx(hw_desc, i); + iter->byte_count = len; + } + } +} + +static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc, + struct iop_adma_chan *chan, + dma_addr_t addr) +{ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + hw_desc.dma->dest_addr = addr; + break; + case AAU_ID: + hw_desc.aau->dest_addr = addr; + break; + default: + BUG(); + } +} + +static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc, + dma_addr_t addr) +{ + struct iop3xx_desc_dma *hw_desc = desc->hw_desc; + hw_desc->src_addr = addr; +} + +static inline void +iop_desc_set_zero_sum_src_addr(struct iop_adma_desc_slot *desc, int src_idx, + dma_addr_t addr) +{ + + struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter; + int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op; + int i; + + for (i = 0; (slot_cnt -= slots_per_op) >= 0; + i += slots_per_op, addr += IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) { + iter = iop_hw_desc_slot_idx(hw_desc, i); + iop3xx_aau_desc_set_src_addr(iter, src_idx, addr); + } +} + +static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc, + int src_idx, dma_addr_t addr) +{ + + struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter; + int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op; + int i; + + for (i = 0; (slot_cnt -= slots_per_op) >= 0; + i += slots_per_op, addr += IOP_ADMA_XOR_MAX_BYTE_COUNT) { + iter = iop_hw_desc_slot_idx(hw_desc, i); + iop3xx_aau_desc_set_src_addr(iter, src_idx, addr); + } +} + +static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc, + u32 next_desc_addr) +{ + /* hw_desc->next_desc is the same location for all channels */ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + BUG_ON(hw_desc.dma->next_desc); + hw_desc.dma->next_desc = next_desc_addr; +} + +static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc) +{ + /* hw_desc->next_desc is the same location for all channels */ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + return hw_desc.dma->next_desc; +} + +static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc) +{ + /* hw_desc->next_desc is the same location for all channels */ + union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; + hw_desc.dma->next_desc = 0; +} + +static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc, + u32 val) +{ + struct iop3xx_desc_aau *hw_desc = desc->hw_desc; + hw_desc->src[0] = val; +} + +static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc) +{ + struct iop3xx_desc_aau *hw_desc = desc->hw_desc; + struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field; + + BUG_ON(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en)); + return desc_ctrl.zero_result_err; +} + +static inline void iop_chan_append(struct iop_adma_chan *chan) +{ + u32 dma_chan_ctrl; + + dma_chan_ctrl = __raw_readl(DMA_CCR(chan)); + dma_chan_ctrl |= 0x2; + __raw_writel(dma_chan_ctrl, DMA_CCR(chan)); +} + +static inline u32 iop_chan_get_status(struct iop_adma_chan *chan) +{ + return __raw_readl(DMA_CSR(chan)); +} + +static inline void iop_chan_disable(struct iop_adma_chan *chan) +{ + u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan)); + dma_chan_ctrl &= ~1; + __raw_writel(dma_chan_ctrl, DMA_CCR(chan)); +} + +static inline void iop_chan_enable(struct iop_adma_chan *chan) +{ + u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan)); + + dma_chan_ctrl |= 1; + __raw_writel(dma_chan_ctrl, DMA_CCR(chan)); +} + +static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan) +{ + u32 status = __raw_readl(DMA_CSR(chan)); + status &= (1 << 9); + __raw_writel(status, DMA_CSR(chan)); +} + +static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan) +{ + u32 status = __raw_readl(DMA_CSR(chan)); + status &= (1 << 8); + __raw_writel(status, DMA_CSR(chan)); +} + +static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan) +{ + u32 status = __raw_readl(DMA_CSR(chan)); + + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + status &= (1 << 5) | (1 << 3) | (1 << 2) | (1 << 1); + break; + case AAU_ID: + status &= (1 << 5); + break; + default: + BUG(); + } + + __raw_writel(status, DMA_CSR(chan)); +} + +static inline int +iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan) +{ + return 0; +} + +static inline int +iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan) +{ + return 0; +} + +static inline int +iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan) +{ + return 0; +} + +static inline int +iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan) +{ + return test_bit(5, &status); +} + +static inline int +iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan) +{ + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + return test_bit(2, &status); + default: + return 0; + } +} + +static inline int +iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan) +{ + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + return test_bit(3, &status); + default: + return 0; + } +} + +static inline int +iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan) +{ + switch (chan->device->id) { + case DMA0_ID: + case DMA1_ID: + return test_bit(1, &status); + default: + return 0; + } +} +#endif /* _ADMA_H */ diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h new file mode 100644 index 000000000000..222e74b7c463 --- /dev/null +++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h @@ -0,0 +1,73 @@ +/* + * arch/arm/include/asm/hardware/iop3xx-gpio.h + * + * IOP3xx GPIO wrappers + * + * Copyright (c) 2008 Arnaud Patard + * Based on IXP4XX gpio.h file + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H +#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H + +#include +#include + +#define IOP3XX_N_GPIOS 8 + +static inline int gpio_get_value(unsigned gpio) +{ + if (gpio > IOP3XX_N_GPIOS) + return __gpio_get_value(gpio); + + return gpio_line_get(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + if (gpio > IOP3XX_N_GPIOS) { + __gpio_set_value(gpio, value); + return; + } + gpio_line_set(gpio, value); +} + +static inline int gpio_cansleep(unsigned gpio) +{ + if (gpio < IOP3XX_N_GPIOS) + return 0; + else + return __gpio_cansleep(gpio); +} + +/* + * The GPIOs are not generating any interrupt + * Note : manuals are not clear about this + */ +static inline int gpio_to_irq(int gpio) +{ + return -EINVAL; +} + +static inline int irq_to_gpio(int gpio) +{ + return -EINVAL; +} + +#endif + diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h new file mode 100644 index 000000000000..4b8e7f559929 --- /dev/null +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -0,0 +1,312 @@ +/* + * arch/arm/include/asm/hardware/iop3xx.h + * + * Intel IOP32X and IOP33X register definitions + * + * Author: Rory Bolt + * Copyright (C) 2002 Rory Bolt + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __IOP3XX_H +#define __IOP3XX_H + +/* + * IOP3XX GPIO handling + */ +#define GPIO_IN 0 +#define GPIO_OUT 1 +#define GPIO_LOW 0 +#define GPIO_HIGH 1 +#define IOP3XX_GPIO_LINE(x) (x) + +#ifndef __ASSEMBLY__ +extern void gpio_line_config(int line, int direction); +extern int gpio_line_get(int line); +extern void gpio_line_set(int line, int value); +extern int init_atu; +extern int iop3xx_get_init_atu(void); +#endif + + +/* + * IOP3XX processor registers + */ +#define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000 +#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfeffe000 +#define IOP3XX_PERIPHERAL_SIZE 0x00002000 +#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\ + IOP3XX_PERIPHERAL_SIZE - 1) +#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\ + IOP3XX_PERIPHERAL_SIZE - 1) +#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) (addr) -\ + (IOP3XX_PERIPHERAL_PHYS_BASE\ + - IOP3XX_PERIPHERAL_VIRT_BASE)) +#define IOP3XX_REG_ADDR(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + (reg)) + +/* Address Translation Unit */ +#define IOP3XX_ATUVID (volatile u16 *)IOP3XX_REG_ADDR(0x0100) +#define IOP3XX_ATUDID (volatile u16 *)IOP3XX_REG_ADDR(0x0102) +#define IOP3XX_ATUCMD (volatile u16 *)IOP3XX_REG_ADDR(0x0104) +#define IOP3XX_ATUSR (volatile u16 *)IOP3XX_REG_ADDR(0x0106) +#define IOP3XX_ATURID (volatile u8 *)IOP3XX_REG_ADDR(0x0108) +#define IOP3XX_ATUCCR (volatile u32 *)IOP3XX_REG_ADDR(0x0109) +#define IOP3XX_ATUCLSR (volatile u8 *)IOP3XX_REG_ADDR(0x010c) +#define IOP3XX_ATULT (volatile u8 *)IOP3XX_REG_ADDR(0x010d) +#define IOP3XX_ATUHTR (volatile u8 *)IOP3XX_REG_ADDR(0x010e) +#define IOP3XX_ATUBIST (volatile u8 *)IOP3XX_REG_ADDR(0x010f) +#define IOP3XX_IABAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0110) +#define IOP3XX_IAUBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0114) +#define IOP3XX_IABAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0118) +#define IOP3XX_IAUBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x011c) +#define IOP3XX_IABAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0120) +#define IOP3XX_IAUBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0124) +#define IOP3XX_ASVIR (volatile u16 *)IOP3XX_REG_ADDR(0x012c) +#define IOP3XX_ASIR (volatile u16 *)IOP3XX_REG_ADDR(0x012e) +#define IOP3XX_ERBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0130) +#define IOP3XX_ATUILR (volatile u8 *)IOP3XX_REG_ADDR(0x013c) +#define IOP3XX_ATUIPR (volatile u8 *)IOP3XX_REG_ADDR(0x013d) +#define IOP3XX_ATUMGNT (volatile u8 *)IOP3XX_REG_ADDR(0x013e) +#define IOP3XX_ATUMLAT (volatile u8 *)IOP3XX_REG_ADDR(0x013f) +#define IOP3XX_IALR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0140) +#define IOP3XX_IATVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0144) +#define IOP3XX_ERLR (volatile u32 *)IOP3XX_REG_ADDR(0x0148) +#define IOP3XX_ERTVR (volatile u32 *)IOP3XX_REG_ADDR(0x014c) +#define IOP3XX_IALR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0150) +#define IOP3XX_IALR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0154) +#define IOP3XX_IATVR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0158) +#define IOP3XX_OIOWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x015c) +#define IOP3XX_OMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0160) +#define IOP3XX_OUMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0164) +#define IOP3XX_OMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0168) +#define IOP3XX_OUMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x016c) +#define IOP3XX_OUDWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x0178) +#define IOP3XX_ATUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0180) +#define IOP3XX_PCSR (volatile u32 *)IOP3XX_REG_ADDR(0x0184) +#define IOP3XX_ATUISR (volatile u32 *)IOP3XX_REG_ADDR(0x0188) +#define IOP3XX_ATUIMR (volatile u32 *)IOP3XX_REG_ADDR(0x018c) +#define IOP3XX_IABAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0190) +#define IOP3XX_IAUBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0194) +#define IOP3XX_IALR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0198) +#define IOP3XX_IATVR3 (volatile u32 *)IOP3XX_REG_ADDR(0x019c) +#define IOP3XX_OCCAR (volatile u32 *)IOP3XX_REG_ADDR(0x01a4) +#define IOP3XX_OCCDR (volatile u32 *)IOP3XX_REG_ADDR(0x01ac) +#define IOP3XX_PDSCR (volatile u32 *)IOP3XX_REG_ADDR(0x01bc) +#define IOP3XX_PMCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01c0) +#define IOP3XX_PMNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01c1) +#define IOP3XX_APMCR (volatile u16 *)IOP3XX_REG_ADDR(0x01c2) +#define IOP3XX_APMCSR (volatile u16 *)IOP3XX_REG_ADDR(0x01c4) +#define IOP3XX_PCIXCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01e0) +#define IOP3XX_PCIXNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01e1) +#define IOP3XX_PCIXCMD (volatile u16 *)IOP3XX_REG_ADDR(0x01e2) +#define IOP3XX_PCIXSR (volatile u32 *)IOP3XX_REG_ADDR(0x01e4) +#define IOP3XX_PCIIRSR (volatile u32 *)IOP3XX_REG_ADDR(0x01ec) +#define IOP3XX_PCSR_OUT_Q_BUSY (1 << 15) +#define IOP3XX_PCSR_IN_Q_BUSY (1 << 14) +#define IOP3XX_ATUCR_OUT_EN (1 << 1) + +#define IOP3XX_INIT_ATU_DEFAULT 0 +#define IOP3XX_INIT_ATU_DISABLE -1 +#define IOP3XX_INIT_ATU_ENABLE 1 + +/* Messaging Unit */ +#define IOP3XX_IMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0310) +#define IOP3XX_IMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0314) +#define IOP3XX_OMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0318) +#define IOP3XX_OMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x031c) +#define IOP3XX_IDR (volatile u32 *)IOP3XX_REG_ADDR(0x0320) +#define IOP3XX_IISR (volatile u32 *)IOP3XX_REG_ADDR(0x0324) +#define IOP3XX_IIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0328) +#define IOP3XX_ODR (volatile u32 *)IOP3XX_REG_ADDR(0x032c) +#define IOP3XX_OISR (volatile u32 *)IOP3XX_REG_ADDR(0x0330) +#define IOP3XX_OIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0334) +#define IOP3XX_MUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0350) +#define IOP3XX_QBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0354) +#define IOP3XX_IFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0360) +#define IOP3XX_IFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0364) +#define IOP3XX_IPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0368) +#define IOP3XX_IPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x036c) +#define IOP3XX_OFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0370) +#define IOP3XX_OFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0374) +#define IOP3XX_OPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0378) +#define IOP3XX_OPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x037c) +#define IOP3XX_IAR (volatile u32 *)IOP3XX_REG_ADDR(0x0380) + +/* DMA Controller */ +#define IOP3XX_DMA_PHYS_BASE(chan) (IOP3XX_PERIPHERAL_PHYS_BASE + \ + (0x400 + (chan << 6))) +#define IOP3XX_DMA_UPPER_PA(chan) (IOP3XX_DMA_PHYS_BASE(chan) + 0x27) + +/* Peripheral bus interface */ +#define IOP3XX_PBCR (volatile u32 *)IOP3XX_REG_ADDR(0x0680) +#define IOP3XX_PBISR (volatile u32 *)IOP3XX_REG_ADDR(0x0684) +#define IOP3XX_PBBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0688) +#define IOP3XX_PBLR0 (volatile u32 *)IOP3XX_REG_ADDR(0x068c) +#define IOP3XX_PBBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0690) +#define IOP3XX_PBLR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0694) +#define IOP3XX_PBBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0698) +#define IOP3XX_PBLR2 (volatile u32 *)IOP3XX_REG_ADDR(0x069c) +#define IOP3XX_PBBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a0) +#define IOP3XX_PBLR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a4) +#define IOP3XX_PBBAR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06a8) +#define IOP3XX_PBLR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06ac) +#define IOP3XX_PBBAR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b0) +#define IOP3XX_PBLR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b4) +#define IOP3XX_PMBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x06c0) +#define IOP3XX_PMBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x06e0) +#define IOP3XX_PMBR2 (volatile u32 *)IOP3XX_REG_ADDR(0x06e4) + +/* Peripheral performance monitoring unit */ +#define IOP3XX_GTMR (volatile u32 *)IOP3XX_REG_ADDR(0x0700) +#define IOP3XX_ESR (volatile u32 *)IOP3XX_REG_ADDR(0x0704) +#define IOP3XX_EMISR (volatile u32 *)IOP3XX_REG_ADDR(0x0708) +#define IOP3XX_GTSR (volatile u32 *)IOP3XX_REG_ADDR(0x0710) +/* PERCR0 DOESN'T EXIST - index from 1! */ +#define IOP3XX_PERCR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0710) + +/* General Purpose I/O */ +#define IOP3XX_GPOE (volatile u32 *)IOP3XX_GPIO_REG(0x0000) +#define IOP3XX_GPID (volatile u32 *)IOP3XX_GPIO_REG(0x0004) +#define IOP3XX_GPOD (volatile u32 *)IOP3XX_GPIO_REG(0x0008) + +/* Timers */ +#define IOP3XX_TU_TMR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0000) +#define IOP3XX_TU_TMR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0004) +#define IOP3XX_TU_TCR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0008) +#define IOP3XX_TU_TCR1 (volatile u32 *)IOP3XX_TIMER_REG(0x000c) +#define IOP3XX_TU_TRR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0010) +#define IOP3XX_TU_TRR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0014) +#define IOP3XX_TU_TISR (volatile u32 *)IOP3XX_TIMER_REG(0x0018) +#define IOP3XX_TU_WDTCR (volatile u32 *)IOP3XX_TIMER_REG(0x001c) +#define IOP_TMR_EN 0x02 +#define IOP_TMR_RELOAD 0x04 +#define IOP_TMR_PRIVILEGED 0x08 +#define IOP_TMR_RATIO_1_1 0x00 + +/* Watchdog timer definitions */ +#define IOP_WDTCR_EN_ARM 0x1e1e1e1e +#define IOP_WDTCR_EN 0xe1e1e1e1 +/* iop3xx does not support stopping the watchdog, so we just re-arm */ +#define IOP_WDTCR_DIS_ARM (IOP_WDTCR_EN_ARM) +#define IOP_WDTCR_DIS (IOP_WDTCR_EN) + +/* Application accelerator unit */ +#define IOP3XX_AAU_PHYS_BASE (IOP3XX_PERIPHERAL_PHYS_BASE + 0x800) +#define IOP3XX_AAU_UPPER_PA (IOP3XX_AAU_PHYS_BASE + 0xa7) + +/* I2C bus interface unit */ +#define IOP3XX_ICR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1680) +#define IOP3XX_ISR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1684) +#define IOP3XX_ISAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1688) +#define IOP3XX_IDBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x168c) +#define IOP3XX_IBMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1694) +#define IOP3XX_ICR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a0) +#define IOP3XX_ISR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a4) +#define IOP3XX_ISAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a8) +#define IOP3XX_IDBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16ac) +#define IOP3XX_IBMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16b4) + + +/* + * IOP3XX I/O and Mem space regions for PCI autoconfiguration + */ +#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000 + +#define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000 +#define IOP3XX_PCI_LOWER_IO_PA 0x90000000 +#define IOP3XX_PCI_LOWER_IO_VA 0xfe000000 +#define IOP3XX_PCI_LOWER_IO_BA 0x90000000 +#define IOP3XX_PCI_UPPER_IO_PA (IOP3XX_PCI_LOWER_IO_PA +\ + IOP3XX_PCI_IO_WINDOW_SIZE - 1) +#define IOP3XX_PCI_UPPER_IO_VA (IOP3XX_PCI_LOWER_IO_VA +\ + IOP3XX_PCI_IO_WINDOW_SIZE - 1) +#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\ + IOP3XX_PCI_LOWER_IO_PA) +\ + IOP3XX_PCI_LOWER_IO_VA) + + +#ifndef __ASSEMBLY__ +void iop3xx_map_io(void); +void iop_init_cp6_handler(void); +void iop_init_time(unsigned long tickrate); +unsigned long iop_gettimeoffset(void); + +static inline void write_tmr0(u32 val) +{ + asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (val)); +} + +static inline void write_tmr1(u32 val) +{ + asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (val)); +} + +static inline u32 read_tcr0(void) +{ + u32 val; + asm volatile("mrc p6, 0, %0, c2, c1, 0" : "=r" (val)); + return val; +} + +static inline u32 read_tcr1(void) +{ + u32 val; + asm volatile("mrc p6, 0, %0, c3, c1, 0" : "=r" (val)); + return val; +} + +static inline void write_trr0(u32 val) +{ + asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val)); +} + +static inline void write_trr1(u32 val) +{ + asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (val)); +} + +static inline void write_tisr(u32 val) +{ + asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (val)); +} + +static inline u32 read_wdtcr(void) +{ + u32 val; + asm volatile("mrc p6, 0, %0, c7, c1, 0":"=r" (val)); + return val; +} +static inline void write_wdtcr(u32 val) +{ + asm volatile("mcr p6, 0, %0, c7, c1, 0"::"r" (val)); +} + +extern unsigned long get_iop_tick_rate(void); + +/* only iop13xx has these registers, we define these to present a + * common register interface for the iop_wdt driver. + */ +#define IOP_RCSR_WDT (0) +static inline u32 read_rcsr(void) +{ + return 0; +} +static inline void write_wdtsr(u32 val) +{ + do { } while (0); +} + +extern struct platform_device iop3xx_dma_0_channel; +extern struct platform_device iop3xx_dma_1_channel; +extern struct platform_device iop3xx_aau_channel; +extern struct platform_device iop3xx_i2c0_device; +extern struct platform_device iop3xx_i2c1_device; + +#endif + + +#endif diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h new file mode 100644 index 000000000000..cb7e3611bcba --- /dev/null +++ b/arch/arm/include/asm/hardware/iop_adma.h @@ -0,0 +1,116 @@ +/* + * Copyright © 2006, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ +#ifndef IOP_ADMA_H +#define IOP_ADMA_H +#include +#include +#include + +#define IOP_ADMA_SLOT_SIZE 32 +#define IOP_ADMA_THRESHOLD 4 + +/** + * struct iop_adma_device - internal representation of an ADMA device + * @pdev: Platform device + * @id: HW ADMA Device selector + * @dma_desc_pool: base of DMA descriptor region (DMA address) + * @dma_desc_pool_virt: base of DMA descriptor region (CPU address) + * @common: embedded struct dma_device + */ +struct iop_adma_device { + struct platform_device *pdev; + int id; + dma_addr_t dma_desc_pool; + void *dma_desc_pool_virt; + struct dma_device common; +}; + +/** + * struct iop_adma_chan - internal representation of an ADMA device + * @pending: allows batching of hardware operations + * @completed_cookie: identifier for the most recently completed operation + * @lock: serializes enqueue/dequeue operations to the slot pool + * @mmr_base: memory mapped register base + * @chain: device chain view of the descriptors + * @device: parent device + * @common: common dmaengine channel object members + * @last_used: place holder for allocation to continue from where it left off + * @all_slots: complete domain of slots usable by the channel + * @slots_allocated: records the actual size of the descriptor slot pool + * @irq_tasklet: bottom half where iop_adma_slot_cleanup runs + */ +struct iop_adma_chan { + int pending; + dma_cookie_t completed_cookie; + spinlock_t lock; /* protects the descriptor slot pool */ + void __iomem *mmr_base; + struct list_head chain; + struct iop_adma_device *device; + struct dma_chan common; + struct iop_adma_desc_slot *last_used; + struct list_head all_slots; + int slots_allocated; + struct tasklet_struct irq_tasklet; +}; + +/** + * struct iop_adma_desc_slot - IOP-ADMA software descriptor + * @slot_node: node on the iop_adma_chan.all_slots list + * @chain_node: node on the op_adma_chan.chain list + * @hw_desc: virtual address of the hardware descriptor chain + * @phys: hardware address of the hardware descriptor chain + * @group_head: first operation in a transaction + * @slot_cnt: total slots used in an transaction (group of operations) + * @slots_per_op: number of slots per operation + * @idx: pool index + * @unmap_src_cnt: number of xor sources + * @unmap_len: transaction bytecount + * @async_tx: support for the async_tx api + * @group_list: list of slots that make up a multi-descriptor transaction + * for example transfer lengths larger than the supported hw max + * @xor_check_result: result of zero sum + * @crc32_result: result crc calculation + */ +struct iop_adma_desc_slot { + struct list_head slot_node; + struct list_head chain_node; + void *hw_desc; + struct iop_adma_desc_slot *group_head; + u16 slot_cnt; + u16 slots_per_op; + u16 idx; + u16 unmap_src_cnt; + size_t unmap_len; + struct dma_async_tx_descriptor async_tx; + union { + u32 *xor_check_result; + u32 *crc32_result; + }; +}; + +struct iop_adma_platform_data { + int hw_id; + dma_cap_mask_t cap_mask; + size_t pool_size; +}; + +#define to_iop_sw_desc(addr_hw_desc) \ + container_of(addr_hw_desc, struct iop_adma_desc_slot, hw_desc) +#define iop_hw_desc_slot_idx(hw_desc, idx) \ + ( (void *) (((unsigned long) hw_desc) + ((idx) << 5)) ) +#endif diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h new file mode 100644 index 000000000000..74b5fff7f575 --- /dev/null +++ b/arch/arm/include/asm/hardware/it8152.h @@ -0,0 +1,99 @@ +/* + * linux/include/arm/hardware/it8152.h + * + * Copyright Compulab Ltd., 2006,2007 + * Mike Rapoport + * + * ITE 8152 companion chip register definitions + */ + +#ifndef __ASM_HARDWARE_IT8152_H +#define __ASM_HARDWARE_IT8152_H +extern unsigned long it8152_base_address; + +#define IT8152_IO_BASE (it8152_base_address + 0x03e00000) +#define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000) + +#define __REG_IT8152(x) (it8152_base_address + (x)) + +#define IT8152_PCI_CFG_ADDR __REG_IT8152(0x3f00800) +#define IT8152_PCI_CFG_DATA __REG_IT8152(0x3f00804) + +#define IT8152_INTC_LDCNIRR __REG_IT8152(0x3f00300) +#define IT8152_INTC_LDPNIRR __REG_IT8152(0x3f00304) +#define IT8152_INTC_LDCNIMR __REG_IT8152(0x3f00308) +#define IT8152_INTC_LDPNIMR __REG_IT8152(0x3f0030C) +#define IT8152_INTC_LDNITR __REG_IT8152(0x3f00310) +#define IT8152_INTC_LDNIAR __REG_IT8152(0x3f00314) +#define IT8152_INTC_LPCNIRR __REG_IT8152(0x3f00320) +#define IT8152_INTC_LPPNIRR __REG_IT8152(0x3f00324) +#define IT8152_INTC_LPCNIMR __REG_IT8152(0x3f00328) +#define IT8152_INTC_LPPNIMR __REG_IT8152(0x3f0032C) +#define IT8152_INTC_LPNITR __REG_IT8152(0x3f00330) +#define IT8152_INTC_LPNIAR __REG_IT8152(0x3f00334) +#define IT8152_INTC_PDCNIRR __REG_IT8152(0x3f00340) +#define IT8152_INTC_PDPNIRR __REG_IT8152(0x3f00344) +#define IT8152_INTC_PDCNIMR __REG_IT8152(0x3f00348) +#define IT8152_INTC_PDPNIMR __REG_IT8152(0x3f0034C) +#define IT8152_INTC_PDNITR __REG_IT8152(0x3f00350) +#define IT8152_INTC_PDNIAR __REG_IT8152(0x3f00354) +#define IT8152_INTC_INTC_TYPER __REG_IT8152(0x3f003FC) + +#define IT8152_GPIO_GPDR __REG_IT8152(0x3f00500) + +/* + Interrupt controller per register summary: + --------------------------------------- + LCDNIRR: + IT8152_LD_IRQ(8) PCICLK stop + IT8152_LD_IRQ(7) MCLK ready + IT8152_LD_IRQ(6) s/w + IT8152_LD_IRQ(5) UART + IT8152_LD_IRQ(4) GPIO + IT8152_LD_IRQ(3) TIMER 4 + IT8152_LD_IRQ(2) TIMER 3 + IT8152_LD_IRQ(1) TIMER 2 + IT8152_LD_IRQ(0) TIMER 1 + + LPCNIRR: + IT8152_LP_IRQ(x) serial IRQ x + + PCIDNIRR: + IT8152_PD_IRQ(14) PCISERR + IT8152_PD_IRQ(13) CPU/PCI bridge target abort (h2pTADR) + IT8152_PD_IRQ(12) CPU/PCI bridge master abort (h2pMADR) + IT8152_PD_IRQ(11) PCI INTD + IT8152_PD_IRQ(10) PCI INTC + IT8152_PD_IRQ(9) PCI INTB + IT8152_PD_IRQ(8) PCI INTA + IT8152_PD_IRQ(7) serial INTD + IT8152_PD_IRQ(6) serial INTC + IT8152_PD_IRQ(5) serial INTB + IT8152_PD_IRQ(4) serial INTA + IT8152_PD_IRQ(3) serial IRQ IOCHK (IOCHKR) + IT8152_PD_IRQ(2) chaining DMA (CDMAR) + IT8152_PD_IRQ(1) USB (USBR) + IT8152_PD_IRQ(0) Audio controller (ACR) + */ +/* frequently used interrupts */ +#define IT8152_PCISERR IT8152_PD_IRQ(14) +#define IT8152_H2PTADR IT8152_PD_IRQ(13) +#define IT8152_H2PMAR IT8152_PD_IRQ(12) +#define IT8152_PCI_INTD IT8152_PD_IRQ(11) +#define IT8152_PCI_INTC IT8152_PD_IRQ(10) +#define IT8152_PCI_INTB IT8152_PD_IRQ(9) +#define IT8152_PCI_INTA IT8152_PD_IRQ(8) +#define IT8152_CDMA_INT IT8152_PD_IRQ(2) +#define IT8152_USB_INT IT8152_PD_IRQ(1) +#define IT8152_AUDIO_INT IT8152_PD_IRQ(0) + +struct pci_dev; +struct pci_sys_data; + +extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc); +extern void it8152_init_irq(void); +extern int it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin); +extern int it8152_pci_setup(int nr, struct pci_sys_data *sys); +extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys); + +#endif /* __ASM_HARDWARE_IT8152_H */ diff --git a/arch/arm/include/asm/hardware/linkup-l1110.h b/arch/arm/include/asm/hardware/linkup-l1110.h new file mode 100644 index 000000000000..7ec91168a576 --- /dev/null +++ b/arch/arm/include/asm/hardware/linkup-l1110.h @@ -0,0 +1,48 @@ +/* +* +* Definitions for H3600 Handheld Computer +* +* Copyright 2001 Compaq Computer Corporation. +* +* Use consistent with the GNU GPL is permitted, +* provided that this copyright notice is +* preserved in its entirety in all copies and derived works. +* +* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, +* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS +* FITNESS FOR ANY PARTICULAR PURPOSE. +* +* Author: Jamey Hicks. +* +*/ + +/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */ + +/* PC Card Status Register */ +#define LINKUP_PRS_S1 (1 << 0) /* voltage control bits S1-S4 */ +#define LINKUP_PRS_S2 (1 << 1) +#define LINKUP_PRS_S3 (1 << 2) +#define LINKUP_PRS_S4 (1 << 3) +#define LINKUP_PRS_BVD1 (1 << 4) +#define LINKUP_PRS_BVD2 (1 << 5) +#define LINKUP_PRS_VS1 (1 << 6) +#define LINKUP_PRS_VS2 (1 << 7) +#define LINKUP_PRS_RDY (1 << 8) +#define LINKUP_PRS_CD1 (1 << 9) +#define LINKUP_PRS_CD2 (1 << 10) + +/* PC Card Command Register */ +#define LINKUP_PRC_S1 (1 << 0) +#define LINKUP_PRC_S2 (1 << 1) +#define LINKUP_PRC_S3 (1 << 2) +#define LINKUP_PRC_S4 (1 << 3) +#define LINKUP_PRC_RESET (1 << 4) +#define LINKUP_PRC_APOE (1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */ +#define LINKUP_PRC_CFE (1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */ +#define LINKUP_PRC_SOE (1 << 7) /* signal output driver enable */ +#define LINKUP_PRC_SSP (1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */ +#define LINKUP_PRC_MBZ (1 << 15) /* must be zero */ + +struct linkup_l1110 { + volatile short prc; +}; diff --git a/arch/arm/include/asm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h new file mode 100644 index 000000000000..954b1be991b4 --- /dev/null +++ b/arch/arm/include/asm/hardware/locomo.h @@ -0,0 +1,217 @@ +/* + * arch/arm/include/asm/hardware/locomo.h + * + * This file contains the definitions for the LoCoMo G/A Chip + * + * (C) Copyright 2004 John Lenz + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Based on sa1111.h + */ +#ifndef _ASM_ARCH_LOCOMO +#define _ASM_ARCH_LOCOMO + +#define locomo_writel(val,addr) ({ *(volatile u16 *)(addr) = (val); }) +#define locomo_readl(addr) (*(volatile u16 *)(addr)) + +/* LOCOMO version */ +#define LOCOMO_VER 0x00 + +/* Pin status */ +#define LOCOMO_ST 0x04 + +/* Pin status */ +#define LOCOMO_C32K 0x08 + +/* Interrupt controller */ +#define LOCOMO_ICR 0x0C + +/* MCS decoder for boot selecting */ +#define LOCOMO_MCSX0 0x10 +#define LOCOMO_MCSX1 0x14 +#define LOCOMO_MCSX2 0x18 +#define LOCOMO_MCSX3 0x1c + +/* Touch panel controller */ +#define LOCOMO_ASD 0x20 /* AD start delay */ +#define LOCOMO_HSD 0x28 /* HSYS delay */ +#define LOCOMO_HSC 0x2c /* HSYS period */ +#define LOCOMO_TADC 0x30 /* tablet ADC clock */ + + +/* Long time timer */ +#define LOCOMO_LTC 0xd8 /* LTC interrupt setting */ +#define LOCOMO_LTINT 0xdc /* LTC interrupt */ + +/* DAC control signal for LCD (COMADJ ) */ +#define LOCOMO_DAC 0xe0 +/* DAC control */ +#define LOCOMO_DAC_SCLOEB 0x08 /* SCL pin output data */ +#define LOCOMO_DAC_TEST 0x04 /* Test bit */ +#define LOCOMO_DAC_SDA 0x02 /* SDA pin level (read-only) */ +#define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */ + +/* SPI interface */ +#define LOCOMO_SPI 0x60 +#define LOCOMO_SPIMD 0x00 /* SPI mode setting */ +#define LOCOMO_SPICT 0x04 /* SPI mode control */ +#define LOCOMO_SPIST 0x08 /* SPI status */ +#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */ +#define LOCOMO_SPI_REND (1 << 2) /* Receive end bit */ +#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */ +#define LOCOMO_SPI_RFR (1) /* read buffer bit */ + +#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */ +#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */ +#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */ +#define LOCOMO_SPIIR 0x1c /* SPI interrupt request */ +#define LOCOMO_SPITD 0x20 /* SPI transfer data write */ +#define LOCOMO_SPIRD 0x24 /* SPI receive data read */ +#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */ +#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */ + +/* GPIO */ +#define LOCOMO_GPD 0x90 /* GPIO direction */ +#define LOCOMO_GPE 0x94 /* GPIO input enable */ +#define LOCOMO_GPL 0x98 /* GPIO level */ +#define LOCOMO_GPO 0x9c /* GPIO out data setting */ +#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */ +#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */ +#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */ +#define LOCOMO_GWE 0xac /* GPIO status write enable */ +#define LOCOMO_GIE 0xb0 /* GPIO interrupt enable */ +#define LOCOMO_GIR 0xb4 /* GPIO interrupt request */ +#define LOCOMO_GPIO(Nb) (0x01 << (Nb)) +#define LOCOMO_GPIO_RTS LOCOMO_GPIO(0) +#define LOCOMO_GPIO_CTS LOCOMO_GPIO(1) +#define LOCOMO_GPIO_DSR LOCOMO_GPIO(2) +#define LOCOMO_GPIO_DTR LOCOMO_GPIO(3) +#define LOCOMO_GPIO_LCD_VSHA_ON LOCOMO_GPIO(4) +#define LOCOMO_GPIO_LCD_VSHD_ON LOCOMO_GPIO(5) +#define LOCOMO_GPIO_LCD_VEE_ON LOCOMO_GPIO(6) +#define LOCOMO_GPIO_LCD_MOD LOCOMO_GPIO(7) +#define LOCOMO_GPIO_DAC_ON LOCOMO_GPIO(8) +#define LOCOMO_GPIO_FL_VR LOCOMO_GPIO(9) +#define LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10) +#define LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11) +#define LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12) +#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13) +#define LOCOMO_GPIO_WRITE_PROT LOCOMO_GPIO(14) +#define LOCOMO_GPIO_CARD_POWER LOCOMO_GPIO(15) + +/* Start the definitions of the devices. Each device has an initial + * base address and a series of offsets from that base address. */ + +/* Keyboard controller */ +#define LOCOMO_KEYBOARD 0x40 +#define LOCOMO_KIB 0x00 /* KIB level */ +#define LOCOMO_KSC 0x04 /* KSTRB control */ +#define LOCOMO_KCMD 0x08 /* KSTRB command */ +#define LOCOMO_KIC 0x0c /* Key interrupt */ + +/* Front light adjustment controller */ +#define LOCOMO_FRONTLIGHT 0xc8 +#define LOCOMO_ALS 0x00 /* Adjust light cycle */ +#define LOCOMO_ALD 0x04 /* Adjust light duty */ + +#define LOCOMO_ALC_EN 0x8000 + +/* Backlight controller: TFT signal */ +#define LOCOMO_BACKLIGHT 0x38 +#define LOCOMO_TC 0x00 /* TFT control signal */ +#define LOCOMO_CPSD 0x04 /* CPS delay */ + +/* Audio controller */ +#define LOCOMO_AUDIO 0x54 +#define LOCOMO_ACC 0x00 /* Audio clock */ +#define LOCOMO_PAIF 0xD0 /* PCM audio interface */ +/* Audio clock */ +#define LOCOMO_ACC_XON 0x80 +#define LOCOMO_ACC_XEN 0x40 +#define LOCOMO_ACC_XSEL0 0x00 +#define LOCOMO_ACC_XSEL1 0x20 +#define LOCOMO_ACC_MCLKEN 0x10 +#define LOCOMO_ACC_64FSEN 0x08 +#define LOCOMO_ACC_CLKSEL000 0x00 /* mclk 2 */ +#define LOCOMO_ACC_CLKSEL001 0x01 /* mclk 3 */ +#define LOCOMO_ACC_CLKSEL010 0x02 /* mclk 4 */ +#define LOCOMO_ACC_CLKSEL011 0x03 /* mclk 6 */ +#define LOCOMO_ACC_CLKSEL100 0x04 /* mclk 8 */ +#define LOCOMO_ACC_CLKSEL101 0x05 /* mclk 12 */ +/* PCM audio interface */ +#define LOCOMO_PAIF_SCINV 0x20 +#define LOCOMO_PAIF_SCEN 0x10 +#define LOCOMO_PAIF_LRCRST 0x08 +#define LOCOMO_PAIF_LRCEVE 0x04 +#define LOCOMO_PAIF_LRCINV 0x02 +#define LOCOMO_PAIF_LRCEN 0x01 + +/* LED controller */ +#define LOCOMO_LED 0xe8 +#define LOCOMO_LPT0 0x00 +#define LOCOMO_LPT1 0x04 +/* LED control */ +#define LOCOMO_LPT_TOFH 0x80 +#define LOCOMO_LPT_TOFL 0x08 +#define LOCOMO_LPT_TOH(TOH) ((TOH & 0x7) << 4) +#define LOCOMO_LPT_TOL(TOL) ((TOL & 0x7)) + +extern struct bus_type locomo_bus_type; + +#define LOCOMO_DEVID_KEYBOARD 0 +#define LOCOMO_DEVID_FRONTLIGHT 1 +#define LOCOMO_DEVID_BACKLIGHT 2 +#define LOCOMO_DEVID_AUDIO 3 +#define LOCOMO_DEVID_LED 4 +#define LOCOMO_DEVID_UART 5 +#define LOCOMO_DEVID_SPI 6 + +struct locomo_dev { + struct device dev; + unsigned int devid; + unsigned int irq[1]; + + void *mapbase; + unsigned long length; + + u64 dma_mask; +}; + +#define LOCOMO_DEV(_d) container_of((_d), struct locomo_dev, dev) + +#define locomo_get_drvdata(d) dev_get_drvdata(&(d)->dev) +#define locomo_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p) + +struct locomo_driver { + struct device_driver drv; + unsigned int devid; + int (*probe)(struct locomo_dev *); + int (*remove)(struct locomo_dev *); + int (*suspend)(struct locomo_dev *, pm_message_t); + int (*resume)(struct locomo_dev *); +}; + +#define LOCOMO_DRV(_d) container_of((_d), struct locomo_driver, drv) + +#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name) + +void locomo_lcd_power(struct locomo_dev *, int, unsigned int); + +int locomo_driver_register(struct locomo_driver *); +void locomo_driver_unregister(struct locomo_driver *); + +/* GPIO control functions */ +void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir); +int locomo_gpio_read_level(struct device *dev, unsigned int bits); +int locomo_gpio_read_output(struct device *dev, unsigned int bits); +void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set); + +/* M62332 control function */ +void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel); + +/* Frontlight control */ +void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf); + +#endif diff --git a/arch/arm/include/asm/hardware/memc.h b/arch/arm/include/asm/hardware/memc.h new file mode 100644 index 000000000000..42ba7c167d1f --- /dev/null +++ b/arch/arm/include/asm/hardware/memc.h @@ -0,0 +1,26 @@ +/* + * arch/arm/include/asm/hardware/memc.h + * + * Copyright (C) Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#define VDMA_ALIGNMENT PAGE_SIZE +#define VDMA_XFERSIZE 16 +#define VDMA_INIT 0 +#define VDMA_START 1 +#define VDMA_END 2 + +#ifndef __ASSEMBLY__ +extern void memc_write(unsigned int reg, unsigned long val); + +#define video_set_dma(start,end,offset) \ +do { \ + memc_write (VDMA_START, (start >> 2)); \ + memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2); \ + memc_write (VDMA_INIT, (offset >> 2)); \ +} while (0) + +#endif diff --git a/arch/arm/include/asm/hardware/pci_v3.h b/arch/arm/include/asm/hardware/pci_v3.h new file mode 100644 index 000000000000..2811c7e2cfdf --- /dev/null +++ b/arch/arm/include/asm/hardware/pci_v3.h @@ -0,0 +1,186 @@ +/* + * arch/arm/include/asm/hardware/pci_v3.h + * + * Internal header file PCI V3 chip + * + * Copyright (C) ARM Limited + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef ASM_ARM_HARDWARE_PCI_V3_H +#define ASM_ARM_HARDWARE_PCI_V3_H + +/* ------------------------------------------------------------------------------- + * V3 Local Bus to PCI Bridge definitions + * ------------------------------------------------------------------------------- + * Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04 + * All V3 register names are prefaced by V3_ to avoid clashing with any other + * PCI definitions. Their names match the user's manual. + * + * I'm assuming that I20 is disabled. + * + */ +#define V3_PCI_VENDOR 0x00000000 +#define V3_PCI_DEVICE 0x00000002 +#define V3_PCI_CMD 0x00000004 +#define V3_PCI_STAT 0x00000006 +#define V3_PCI_CC_REV 0x00000008 +#define V3_PCI_HDR_CFG 0x0000000C +#define V3_PCI_IO_BASE 0x00000010 +#define V3_PCI_BASE0 0x00000014 +#define V3_PCI_BASE1 0x00000018 +#define V3_PCI_SUB_VENDOR 0x0000002C +#define V3_PCI_SUB_ID 0x0000002E +#define V3_PCI_ROM 0x00000030 +#define V3_PCI_BPARAM 0x0000003C +#define V3_PCI_MAP0 0x00000040 +#define V3_PCI_MAP1 0x00000044 +#define V3_PCI_INT_STAT 0x00000048 +#define V3_PCI_INT_CFG 0x0000004C +#define V3_LB_BASE0 0x00000054 +#define V3_LB_BASE1 0x00000058 +#define V3_LB_MAP0 0x0000005E +#define V3_LB_MAP1 0x00000062 +#define V3_LB_BASE2 0x00000064 +#define V3_LB_MAP2 0x00000066 +#define V3_LB_SIZE 0x00000068 +#define V3_LB_IO_BASE 0x0000006E +#define V3_FIFO_CFG 0x00000070 +#define V3_FIFO_PRIORITY 0x00000072 +#define V3_FIFO_STAT 0x00000074 +#define V3_LB_ISTAT 0x00000076 +#define V3_LB_IMASK 0x00000077 +#define V3_SYSTEM 0x00000078 +#define V3_LB_CFG 0x0000007A +#define V3_PCI_CFG 0x0000007C +#define V3_DMA_PCI_ADR0 0x00000080 +#define V3_DMA_PCI_ADR1 0x00000090 +#define V3_DMA_LOCAL_ADR0 0x00000084 +#define V3_DMA_LOCAL_ADR1 0x00000094 +#define V3_DMA_LENGTH0 0x00000088 +#define V3_DMA_LENGTH1 0x00000098 +#define V3_DMA_CSR0 0x0000008B +#define V3_DMA_CSR1 0x0000009B +#define V3_DMA_CTLB_ADR0 0x0000008C +#define V3_DMA_CTLB_ADR1 0x0000009C +#define V3_DMA_DELAY 0x000000E0 +#define V3_MAIL_DATA 0x000000C0 +#define V3_PCI_MAIL_IEWR 0x000000D0 +#define V3_PCI_MAIL_IERD 0x000000D2 +#define V3_LB_MAIL_IEWR 0x000000D4 +#define V3_LB_MAIL_IERD 0x000000D6 +#define V3_MAIL_WR_STAT 0x000000D8 +#define V3_MAIL_RD_STAT 0x000000DA +#define V3_QBA_MAP 0x000000DC + +/* PCI COMMAND REGISTER bits + */ +#define V3_COMMAND_M_FBB_EN (1 << 9) +#define V3_COMMAND_M_SERR_EN (1 << 8) +#define V3_COMMAND_M_PAR_EN (1 << 6) +#define V3_COMMAND_M_MASTER_EN (1 << 2) +#define V3_COMMAND_M_MEM_EN (1 << 1) +#define V3_COMMAND_M_IO_EN (1 << 0) + +/* SYSTEM REGISTER bits + */ +#define V3_SYSTEM_M_RST_OUT (1 << 15) +#define V3_SYSTEM_M_LOCK (1 << 14) + +/* PCI_CFG bits + */ +#define V3_PCI_CFG_M_I2O_EN (1 << 15) +#define V3_PCI_CFG_M_IO_REG_DIS (1 << 14) +#define V3_PCI_CFG_M_IO_DIS (1 << 13) +#define V3_PCI_CFG_M_EN3V (1 << 12) +#define V3_PCI_CFG_M_RETRY_EN (1 << 10) +#define V3_PCI_CFG_M_AD_LOW1 (1 << 9) +#define V3_PCI_CFG_M_AD_LOW0 (1 << 8) + +/* PCI_BASE register bits (PCI -> Local Bus) + */ +#define V3_PCI_BASE_M_ADR_BASE 0xFFF00000 +#define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00 +#define V3_PCI_BASE_M_PREFETCH (1 << 3) +#define V3_PCI_BASE_M_TYPE (3 << 1) +#define V3_PCI_BASE_M_IO (1 << 0) + +/* PCI MAP register bits (PCI -> Local bus) + */ +#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000 +#define V3_PCI_MAP_M_RD_POST_INH (1 << 15) +#define V3_PCI_MAP_M_ROM_SIZE (3 << 10) +#define V3_PCI_MAP_M_SWAP (3 << 8) +#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0 +#define V3_PCI_MAP_M_REG_EN (1 << 1) +#define V3_PCI_MAP_M_ENABLE (1 << 0) + +/* + * LB_BASE0,1 register bits (Local bus -> PCI) + */ +#define V3_LB_BASE_ADR_BASE 0xfff00000 +#define V3_LB_BASE_SWAP (3 << 8) +#define V3_LB_BASE_ADR_SIZE (15 << 4) +#define V3_LB_BASE_PREFETCH (1 << 3) +#define V3_LB_BASE_ENABLE (1 << 0) + +#define V3_LB_BASE_ADR_SIZE_1MB (0 << 4) +#define V3_LB_BASE_ADR_SIZE_2MB (1 << 4) +#define V3_LB_BASE_ADR_SIZE_4MB (2 << 4) +#define V3_LB_BASE_ADR_SIZE_8MB (3 << 4) +#define V3_LB_BASE_ADR_SIZE_16MB (4 << 4) +#define V3_LB_BASE_ADR_SIZE_32MB (5 << 4) +#define V3_LB_BASE_ADR_SIZE_64MB (6 << 4) +#define V3_LB_BASE_ADR_SIZE_128MB (7 << 4) +#define V3_LB_BASE_ADR_SIZE_256MB (8 << 4) +#define V3_LB_BASE_ADR_SIZE_512MB (9 << 4) +#define V3_LB_BASE_ADR_SIZE_1GB (10 << 4) +#define V3_LB_BASE_ADR_SIZE_2GB (11 << 4) + +#define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE) + +/* + * LB_MAP0,1 register bits (Local bus -> PCI) + */ +#define V3_LB_MAP_MAP_ADR 0xfff0 +#define V3_LB_MAP_TYPE (7 << 1) +#define V3_LB_MAP_AD_LOW_EN (1 << 0) + +#define V3_LB_MAP_TYPE_IACK (0 << 1) +#define V3_LB_MAP_TYPE_IO (1 << 1) +#define V3_LB_MAP_TYPE_MEM (3 << 1) +#define V3_LB_MAP_TYPE_CONFIG (5 << 1) +#define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1) + +#define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR) + +/* + * LB_BASE2 register bits (Local bus -> PCI IO) + */ +#define V3_LB_BASE2_ADR_BASE 0xff00 +#define V3_LB_BASE2_SWAP (3 << 6) +#define V3_LB_BASE2_ENABLE (1 << 0) + +#define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE) + +/* + * LB_MAP2 register bits (Local bus -> PCI IO) + */ +#define V3_LB_MAP2_MAP_ADR 0xff00 + +#define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR) + +#endif diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h new file mode 100644 index 000000000000..6cf98d4f7dc3 --- /dev/null +++ b/arch/arm/include/asm/hardware/sa1111.h @@ -0,0 +1,581 @@ +/* + * arch/arm/include/asm/hardware/sa1111.h + * + * Copyright (C) 2000 John G Dorsey + * + * This file contains definitions for the SA-1111 Companion Chip. + * (Structure and naming borrowed from SA-1101.h, by Peter Danielsson.) + * + * Macro that calculates real address for registers in the SA-1111 + */ + +#ifndef _ASM_ARCH_SA1111 +#define _ASM_ARCH_SA1111 + +#include + +/* + * The SA1111 is always located at virtual 0xf4000000, and is always + * "native" endian. + */ + +#define SA1111_VBASE 0xf4000000 + +/* Don't use these! */ +#define SA1111_p2v( x ) ((x) - SA1111_BASE + SA1111_VBASE) +#define SA1111_v2p( x ) ((x) - SA1111_VBASE + SA1111_BASE) + +#ifndef __ASSEMBLY__ +#define _SA1111(x) ((x) + sa1111->resource.start) +#endif + +#define sa1111_writel(val,addr) __raw_writel(val, addr) +#define sa1111_readl(addr) __raw_readl(addr) + +/* + * 26 bits of the SA-1110 address bus are available to the SA-1111. + * Use these when feeding target addresses to the DMA engines. + */ + +#define SA1111_ADDR_WIDTH (26) +#define SA1111_ADDR_MASK ((1<dev) +#define sa1111_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p) + +struct sa1111_driver { + struct device_driver drv; + unsigned int devid; + int (*probe)(struct sa1111_dev *); + int (*remove)(struct sa1111_dev *); + int (*suspend)(struct sa1111_dev *, pm_message_t); + int (*resume)(struct sa1111_dev *); +}; + +#define SA1111_DRV(_d) container_of((_d), struct sa1111_driver, drv) + +#define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name) + +/* + * These frob the SKPCR register. + */ +void sa1111_enable_device(struct sa1111_dev *); +void sa1111_disable_device(struct sa1111_dev *); + +unsigned int sa1111_pll_clock(struct sa1111_dev *); + +#define SA1111_AUDIO_ACLINK 0 +#define SA1111_AUDIO_I2S 1 + +void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode); +int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate); +int sa1111_get_audio_rate(struct sa1111_dev *sadev); + +int sa1111_check_dma_bug(dma_addr_t addr); + +int sa1111_driver_register(struct sa1111_driver *); +void sa1111_driver_unregister(struct sa1111_driver *); + +void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int dir, unsigned int sleep_dir); +void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v); +void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v); + +#endif /* _ASM_ARCH_SA1111 */ diff --git a/arch/arm/include/asm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h new file mode 100644 index 000000000000..dfb8330599f9 --- /dev/null +++ b/arch/arm/include/asm/hardware/scoop.h @@ -0,0 +1,69 @@ +/* + * Definitions for the SCOOP interface found on various Sharp PDAs + * + * Copyright (c) 2004 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#define SCOOP_MCR 0x00 +#define SCOOP_CDR 0x04 +#define SCOOP_CSR 0x08 +#define SCOOP_CPR 0x0C +#define SCOOP_CCR 0x10 +#define SCOOP_IRR 0x14 +#define SCOOP_IRM 0x14 +#define SCOOP_IMR 0x18 +#define SCOOP_ISR 0x1C +#define SCOOP_GPCR 0x20 +#define SCOOP_GPWR 0x24 +#define SCOOP_GPRR 0x28 + +#define SCOOP_GPCR_PA22 ( 1 << 12 ) +#define SCOOP_GPCR_PA21 ( 1 << 11 ) +#define SCOOP_GPCR_PA20 ( 1 << 10 ) +#define SCOOP_GPCR_PA19 ( 1 << 9 ) +#define SCOOP_GPCR_PA18 ( 1 << 8 ) +#define SCOOP_GPCR_PA17 ( 1 << 7 ) +#define SCOOP_GPCR_PA16 ( 1 << 6 ) +#define SCOOP_GPCR_PA15 ( 1 << 5 ) +#define SCOOP_GPCR_PA14 ( 1 << 4 ) +#define SCOOP_GPCR_PA13 ( 1 << 3 ) +#define SCOOP_GPCR_PA12 ( 1 << 2 ) +#define SCOOP_GPCR_PA11 ( 1 << 1 ) + +struct scoop_config { + unsigned short io_out; + unsigned short io_dir; + unsigned short suspend_clr; + unsigned short suspend_set; + int gpio_base; +}; + +/* Structure for linking scoop devices to PCMCIA sockets */ +struct scoop_pcmcia_dev { + struct device *dev; /* Pointer to this socket's scoop device */ + int irq; /* irq for socket */ + int cd_irq; + const char *cd_irq_str; + unsigned char keep_vs; + unsigned char keep_rd; +}; + +struct scoop_pcmcia_config { + struct scoop_pcmcia_dev *devs; + int num_devs; + void (*pcmcia_init)(void); + void (*power_ctrl)(struct device *scoop, unsigned short cpr, int nr); +}; + +extern struct scoop_pcmcia_config *platform_scoop_config; + +void reset_scoop(struct device *dev); +unsigned short __deprecated set_scoop_gpio(struct device *dev, unsigned short bit); +unsigned short __deprecated reset_scoop_gpio(struct device *dev, unsigned short bit); +unsigned short read_scoop_reg(struct device *dev, unsigned short reg); +void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data); diff --git a/arch/arm/include/asm/hardware/sharpsl_pm.h b/arch/arm/include/asm/hardware/sharpsl_pm.h new file mode 100644 index 000000000000..2d00db22b981 --- /dev/null +++ b/arch/arm/include/asm/hardware/sharpsl_pm.h @@ -0,0 +1,106 @@ +/* + * SharpSL Battery/PM Driver + * + * Copyright (c) 2004-2005 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include + +struct sharpsl_charger_machinfo { + void (*init)(void); + void (*exit)(void); + int gpio_acin; + int gpio_batfull; + int batfull_irq; + int gpio_batlock; + int gpio_fatal; + void (*discharge)(int); + void (*discharge1)(int); + void (*charge)(int); + void (*measure_temp)(int); + void (*presuspend)(void); + void (*postsuspend)(void); + void (*earlyresume)(void); + unsigned long (*read_devdata)(int); +#define SHARPSL_BATT_VOLT 1 +#define SHARPSL_BATT_TEMP 2 +#define SHARPSL_ACIN_VOLT 3 +#define SHARPSL_STATUS_ACIN 4 +#define SHARPSL_STATUS_LOCK 5 +#define SHARPSL_STATUS_CHRGFULL 6 +#define SHARPSL_STATUS_FATAL 7 + unsigned long (*charger_wakeup)(void); + int (*should_wakeup)(unsigned int resume_on_alarm); + void (*backlight_limit)(int); + int (*backlight_get_status) (void); + int charge_on_volt; + int charge_on_temp; + int charge_acin_high; + int charge_acin_low; + int fatal_acin_volt; + int fatal_noacin_volt; + int bat_levels; + struct battery_thresh *bat_levels_noac; + struct battery_thresh *bat_levels_acin; + struct battery_thresh *bat_levels_noac_bl; + struct battery_thresh *bat_levels_acin_bl; + int status_high_acin; + int status_low_acin; + int status_high_noac; + int status_low_noac; +}; + +struct battery_thresh { + int voltage; + int percentage; +}; + +struct battery_stat { + int ac_status; /* APM AC Present/Not Present */ + int mainbat_status; /* APM Main Battery Status */ + int mainbat_percent; /* Main Battery Percentage Charge */ + int mainbat_voltage; /* Main Battery Voltage */ +}; + +struct sharpsl_pm_status { + struct device *dev; + struct timer_list ac_timer; + struct timer_list chrg_full_timer; + + int charge_mode; +#define CHRG_ERROR (-1) +#define CHRG_OFF (0) +#define CHRG_ON (1) +#define CHRG_DONE (2) + + unsigned int flags; +#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */ +#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */ +#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */ +#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */ +#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */ + + int full_count; + unsigned long charge_start_time; + struct sharpsl_charger_machinfo *machinfo; + struct battery_stat battstat; +}; + +extern struct sharpsl_pm_status sharpsl_pm; + + +#define SHARPSL_LED_ERROR 2 +#define SHARPSL_LED_ON 1 +#define SHARPSL_LED_OFF 0 + +void sharpsl_battery_kick(void); +void sharpsl_pm_led(int val); +irqreturn_t sharpsl_ac_isr(int irq, void *dev_id); +irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id); +irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id); + diff --git a/arch/arm/include/asm/hardware/ssp.h b/arch/arm/include/asm/hardware/ssp.h new file mode 100644 index 000000000000..3b42e181997c --- /dev/null +++ b/arch/arm/include/asm/hardware/ssp.h @@ -0,0 +1,28 @@ +/* + * ssp.h + * + * Copyright (C) 2003 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef SSP_H +#define SSP_H + +struct ssp_state { + unsigned int cr0; + unsigned int cr1; +}; + +int ssp_write_word(u16 data); +int ssp_read_word(u16 *data); +int ssp_flush(void); +void ssp_enable(void); +void ssp_disable(void); +void ssp_save_state(struct ssp_state *ssp); +void ssp_restore_state(struct ssp_state *ssp); +int ssp_init(void); +void ssp_exit(void); + +#endif diff --git a/arch/arm/include/asm/hardware/uengine.h b/arch/arm/include/asm/hardware/uengine.h new file mode 100644 index 000000000000..b442d65c6593 --- /dev/null +++ b/arch/arm/include/asm/hardware/uengine.h @@ -0,0 +1,62 @@ +/* + * Generic library functions for the microengines found on the Intel + * IXP2000 series of network processors. + * + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of the + * License, or (at your option) any later version. + */ + +#ifndef __IXP2000_UENGINE_H +#define __IXP2000_UENGINE_H + +extern u32 ixp2000_uengine_mask; + +struct ixp2000_uengine_code +{ + u32 cpu_model_bitmask; + u8 cpu_min_revision; + u8 cpu_max_revision; + + u32 uengine_parameters; + + struct ixp2000_reg_value { + int reg; + u32 value; + } *initial_reg_values; + + int num_insns; + u8 *insns; +}; + +u32 ixp2000_uengine_csr_read(int uengine, int offset); +void ixp2000_uengine_csr_write(int uengine, int offset, u32 value); +void ixp2000_uengine_reset(u32 uengine_mask); +void ixp2000_uengine_set_mode(int uengine, u32 mode); +void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns); +void ixp2000_uengine_init_context(int uengine, int context, int pc); +void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask); +void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask); +int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c); + +#define IXP2000_UENGINE_8_CONTEXTS 0x00000000 +#define IXP2000_UENGINE_4_CONTEXTS 0x80000000 +#define IXP2000_UENGINE_PRN_UPDATE_EVERY 0x40000000 +#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS 0x00000000 +#define IXP2000_UENGINE_NN_FROM_SELF 0x00100000 +#define IXP2000_UENGINE_NN_FROM_PREVIOUS 0x00000000 +#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3 0x000c0000 +#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2 0x00080000 +#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1 0x00040000 +#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0 0x00000000 +#define IXP2000_UENGINE_LM_ADDR1_GLOBAL 0x00020000 +#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT 0x00000000 +#define IXP2000_UENGINE_LM_ADDR0_GLOBAL 0x00010000 +#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT 0x00000000 + + +#endif diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h new file mode 100644 index 000000000000..263f2c362a30 --- /dev/null +++ b/arch/arm/include/asm/hardware/vic.h @@ -0,0 +1,45 @@ +/* + * arch/arm/include/asm/hardware/vic.h + * + * Copyright (c) ARM Limited 2003. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_HARDWARE_VIC_H +#define __ASM_ARM_HARDWARE_VIC_H + +#define VIC_IRQ_STATUS 0x00 +#define VIC_FIQ_STATUS 0x04 +#define VIC_RAW_STATUS 0x08 +#define VIC_INT_SELECT 0x0c /* 1 = FIQ, 0 = IRQ */ +#define VIC_INT_ENABLE 0x10 /* 1 = enable, 0 = disable */ +#define VIC_INT_ENABLE_CLEAR 0x14 +#define VIC_INT_SOFT 0x18 +#define VIC_INT_SOFT_CLEAR 0x1c +#define VIC_PROTECT 0x20 +#define VIC_VECT_ADDR 0x30 +#define VIC_DEF_VECT_ADDR 0x34 + +#define VIC_VECT_ADDR0 0x100 /* 0 to 15 */ +#define VIC_VECT_CNTL0 0x200 /* 0 to 15 */ +#define VIC_ITCR 0x300 /* VIC test control register */ + +#define VIC_VECT_CNTL_ENABLE (1 << 5) + +#ifndef __ASSEMBLY__ +void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources); +#endif + +#endif diff --git a/arch/arm/include/asm/hw_irq.h b/arch/arm/include/asm/hw_irq.h new file mode 100644 index 000000000000..f1a08a500604 --- /dev/null +++ b/arch/arm/include/asm/hw_irq.h @@ -0,0 +1,9 @@ +/* + * Nothing to see here yet + */ +#ifndef _ARCH_ARM_HW_IRQ_H +#define _ARCH_ARM_HW_IRQ_H + +#include + +#endif diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h new file mode 100644 index 000000000000..81f4c899a555 --- /dev/null +++ b/arch/arm/include/asm/hwcap.h @@ -0,0 +1,29 @@ +#ifndef __ASMARM_HWCAP_H +#define __ASMARM_HWCAP_H + +/* + * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP + */ +#define HWCAP_SWP 1 +#define HWCAP_HALF 2 +#define HWCAP_THUMB 4 +#define HWCAP_26BIT 8 /* Play it safe */ +#define HWCAP_FAST_MULT 16 +#define HWCAP_FPA 32 +#define HWCAP_VFP 64 +#define HWCAP_EDSP 128 +#define HWCAP_JAVA 256 +#define HWCAP_IWMMXT 512 +#define HWCAP_CRUNCH 1024 +#define HWCAP_THUMBEE 2048 + +#if defined(__KERNEL__) && !defined(__ASSEMBLY__) +/* + * This yields a mask that user programs can use to figure out what + * instruction set this cpu supports. + */ +#define ELF_HWCAP (elf_hwcap) +extern unsigned int elf_hwcap; +#endif + +#endif diff --git a/arch/arm/include/asm/ide.h b/arch/arm/include/asm/ide.h new file mode 100644 index 000000000000..b507ce8e5019 --- /dev/null +++ b/arch/arm/include/asm/ide.h @@ -0,0 +1,23 @@ +/* + * arch/arm/include/asm/ide.h + * + * Copyright (C) 1994-1996 Linus Torvalds & authors + */ + +/* + * This file contains the ARM architecture specific IDE code. + */ + +#ifndef __ASMARM_IDE_H +#define __ASMARM_IDE_H + +#ifdef __KERNEL__ + +#define __ide_mm_insw(port,addr,len) readsw(port,addr,len) +#define __ide_mm_insl(port,addr,len) readsl(port,addr,len) +#define __ide_mm_outsw(port,addr,len) writesw(port,addr,len) +#define __ide_mm_outsl(port,addr,len) writesl(port,addr,len) + +#endif /* __KERNEL__ */ + +#endif /* __ASMARM_IDE_H */ diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h new file mode 100644 index 000000000000..ffe07c0f46d8 --- /dev/null +++ b/arch/arm/include/asm/io.h @@ -0,0 +1,287 @@ +/* + * arch/arm/include/asm/io.h + * + * Copyright (C) 1996-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 16-Sep-1996 RMK Inlined the inx/outx functions & optimised for both + * constant addresses and variable addresses. + * 04-Dec-1997 RMK Moved a lot of this stuff to the new architecture + * specific IO header files. + * 27-Mar-1999 PJB Second parameter of memcpy_toio is const.. + * 04-Apr-1999 PJB Added check_signature. + * 12-Dec-1999 RMK More cleanups + * 18-Jun-2000 RMK Removed virt_to_* and friends definitions + * 05-Oct-2004 BJD Moved memory string functions to use void __iomem + */ +#ifndef __ASM_ARM_IO_H +#define __ASM_ARM_IO_H + +#ifdef __KERNEL__ + +#include +#include +#include + +/* + * ISA I/O bus memory addresses are 1:1 with the physical address. + */ +#define isa_virt_to_bus virt_to_phys +#define isa_page_to_bus page_to_phys +#define isa_bus_to_virt phys_to_virt + +/* + * Generic IO read/write. These perform native-endian accesses. Note + * that some architectures will want to re-define __raw_{read,write}w. + */ +extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen); +extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen); +extern void __raw_writesl(void __iomem *addr, const void *data, int longlen); + +extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen); +extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen); +extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); + +#define __raw_writeb(v,a) (__chk_io_ptr(a), *(volatile unsigned char __force *)(a) = (v)) +#define __raw_writew(v,a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v)) +#define __raw_writel(v,a) (__chk_io_ptr(a), *(volatile unsigned int __force *)(a) = (v)) + +#define __raw_readb(a) (__chk_io_ptr(a), *(volatile unsigned char __force *)(a)) +#define __raw_readw(a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a)) +#define __raw_readl(a) (__chk_io_ptr(a), *(volatile unsigned int __force *)(a)) + +/* + * Architecture ioremap implementation. + */ +#define MT_DEVICE 0 +#define MT_DEVICE_NONSHARED 1 +#define MT_DEVICE_CACHED 2 +#define MT_DEVICE_IXP2000 3 +/* + * types 4 onwards can be found in asm/mach/map.h and are undefined + * for ioremap + */ + +/* + * __arm_ioremap takes CPU physical address. + * __arm_ioremap_pfn takes a Page Frame Number and an offset into that page + */ +extern void __iomem * __arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int); +extern void __iomem * __arm_ioremap(unsigned long, size_t, unsigned int); +extern void __iounmap(volatile void __iomem *addr); + +/* + * Bad read/write accesses... + */ +extern void __readwrite_bug(const char *fn); + +/* + * Now, pick up the machine-defined IO definitions + */ +#include + +/* + * IO port access primitives + * ------------------------- + * + * The ARM doesn't have special IO access instructions; all IO is memory + * mapped. Note that these are defined to perform little endian accesses + * only. Their primary purpose is to access PCI and ISA peripherals. + * + * Note that for a big endian machine, this implies that the following + * big endian mode connectivity is in place, as described by numerous + * ARM documents: + * + * PCI: D0-D7 D8-D15 D16-D23 D24-D31 + * ARM: D24-D31 D16-D23 D8-D15 D0-D7 + * + * The machine specific io.h include defines __io to translate an "IO" + * address to a memory address. + * + * Note that we prevent GCC re-ordering or caching values in expressions + * by introducing sequence points into the in*() definitions. Note that + * __raw_* do not guarantee this behaviour. + * + * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space. + */ +#ifdef __io +#define outb(v,p) __raw_writeb(v,__io(p)) +#define outw(v,p) __raw_writew((__force __u16) \ + cpu_to_le16(v),__io(p)) +#define outl(v,p) __raw_writel((__force __u32) \ + cpu_to_le32(v),__io(p)) + +#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __v; }) +#define inw(p) ({ __u16 __v = le16_to_cpu((__force __le16) \ + __raw_readw(__io(p))); __v; }) +#define inl(p) ({ __u32 __v = le32_to_cpu((__force __le32) \ + __raw_readl(__io(p))); __v; }) + +#define outsb(p,d,l) __raw_writesb(__io(p),d,l) +#define outsw(p,d,l) __raw_writesw(__io(p),d,l) +#define outsl(p,d,l) __raw_writesl(__io(p),d,l) + +#define insb(p,d,l) __raw_readsb(__io(p),d,l) +#define insw(p,d,l) __raw_readsw(__io(p),d,l) +#define insl(p,d,l) __raw_readsl(__io(p),d,l) +#endif + +#define outb_p(val,port) outb((val),(port)) +#define outw_p(val,port) outw((val),(port)) +#define outl_p(val,port) outl((val),(port)) +#define inb_p(port) inb((port)) +#define inw_p(port) inw((port)) +#define inl_p(port) inl((port)) + +#define outsb_p(port,from,len) outsb(port,from,len) +#define outsw_p(port,from,len) outsw(port,from,len) +#define outsl_p(port,from,len) outsl(port,from,len) +#define insb_p(port,to,len) insb(port,to,len) +#define insw_p(port,to,len) insw(port,to,len) +#define insl_p(port,to,len) insl(port,to,len) + +/* + * String version of IO memory access ops: + */ +extern void _memcpy_fromio(void *, const volatile void __iomem *, size_t); +extern void _memcpy_toio(volatile void __iomem *, const void *, size_t); +extern void _memset_io(volatile void __iomem *, int, size_t); + +#define mmiowb() + +/* + * Memory access primitives + * ------------------------ + * + * These perform PCI memory accesses via an ioremap region. They don't + * take an address as such, but a cookie. + * + * Again, this are defined to perform little endian accesses. See the + * IO port primitives for more information. + */ +#ifdef __mem_pci +#define readb(c) ({ __u8 __v = __raw_readb(__mem_pci(c)); __v; }) +#define readw(c) ({ __u16 __v = le16_to_cpu((__force __le16) \ + __raw_readw(__mem_pci(c))); __v; }) +#define readl(c) ({ __u32 __v = le32_to_cpu((__force __le32) \ + __raw_readl(__mem_pci(c))); __v; }) +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) + +#define readsb(p,d,l) __raw_readsb(__mem_pci(p),d,l) +#define readsw(p,d,l) __raw_readsw(__mem_pci(p),d,l) +#define readsl(p,d,l) __raw_readsl(__mem_pci(p),d,l) + +#define writeb(v,c) __raw_writeb(v,__mem_pci(c)) +#define writew(v,c) __raw_writew((__force __u16) \ + cpu_to_le16(v),__mem_pci(c)) +#define writel(v,c) __raw_writel((__force __u32) \ + cpu_to_le32(v),__mem_pci(c)) + +#define writesb(p,d,l) __raw_writesb(__mem_pci(p),d,l) +#define writesw(p,d,l) __raw_writesw(__mem_pci(p),d,l) +#define writesl(p,d,l) __raw_writesl(__mem_pci(p),d,l) + +#define memset_io(c,v,l) _memset_io(__mem_pci(c),(v),(l)) +#define memcpy_fromio(a,c,l) _memcpy_fromio((a),__mem_pci(c),(l)) +#define memcpy_toio(c,a,l) _memcpy_toio(__mem_pci(c),(a),(l)) + +#elif !defined(readb) + +#define readb(c) (__readwrite_bug("readb"),0) +#define readw(c) (__readwrite_bug("readw"),0) +#define readl(c) (__readwrite_bug("readl"),0) +#define writeb(v,c) __readwrite_bug("writeb") +#define writew(v,c) __readwrite_bug("writew") +#define writel(v,c) __readwrite_bug("writel") + +#define check_signature(io,sig,len) (0) + +#endif /* __mem_pci */ + +/* + * ioremap and friends. + * + * ioremap takes a PCI memory address, as specified in + * Documentation/IO-mapping.txt. + * + */ +#ifndef __arch_ioremap +#define ioremap(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE) +#define ioremap_nocache(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE) +#define ioremap_cached(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_CACHED) +#define iounmap(cookie) __iounmap(cookie) +#else +#define ioremap(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) +#define ioremap_nocache(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) +#define ioremap_cached(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_CACHED) +#define iounmap(cookie) __arch_iounmap(cookie) +#endif + +/* + * io{read,write}{8,16,32} macros + */ +#ifndef ioread8 +#define ioread8(p) ({ unsigned int __v = __raw_readb(p); __v; }) +#define ioread16(p) ({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __v; }) +#define ioread32(p) ({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __v; }) + +#define iowrite8(v,p) __raw_writeb(v, p) +#define iowrite16(v,p) __raw_writew((__force __u16)cpu_to_le16(v), p) +#define iowrite32(v,p) __raw_writel((__force __u32)cpu_to_le32(v), p) + +#define ioread8_rep(p,d,c) __raw_readsb(p,d,c) +#define ioread16_rep(p,d,c) __raw_readsw(p,d,c) +#define ioread32_rep(p,d,c) __raw_readsl(p,d,c) + +#define iowrite8_rep(p,s,c) __raw_writesb(p,s,c) +#define iowrite16_rep(p,s,c) __raw_writesw(p,s,c) +#define iowrite32_rep(p,s,c) __raw_writesl(p,s,c) + +extern void __iomem *ioport_map(unsigned long port, unsigned int nr); +extern void ioport_unmap(void __iomem *addr); +#endif + +struct pci_dev; + +extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen); +extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); + +/* + * can the hardware map this into one segment or not, given no other + * constraints. + */ +#define BIOVEC_MERGEABLE(vec1, vec2) \ + ((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2))) + +#ifdef CONFIG_MMU +#define ARCH_HAS_VALID_PHYS_ADDR_RANGE +extern int valid_phys_addr_range(unsigned long addr, size_t size); +extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); +#endif + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +/* + * Register ISA memory and port locations for glibc iopl/inb/outb + * emulation. + */ +extern void register_isa_ports(unsigned int mmio, unsigned int io, + unsigned int io_shift); + +#endif /* __KERNEL__ */ +#endif /* __ASM_ARM_IO_H */ diff --git a/arch/arm/include/asm/ioctl.h b/arch/arm/include/asm/ioctl.h new file mode 100644 index 000000000000..b279fe06dfe5 --- /dev/null +++ b/arch/arm/include/asm/ioctl.h @@ -0,0 +1 @@ +#include diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/asm/ioctls.h new file mode 100644 index 000000000000..a91d8a1523cf --- /dev/null +++ b/arch/arm/include/asm/ioctls.h @@ -0,0 +1,84 @@ +#ifndef __ASM_ARM_IOCTLS_H +#define __ASM_ARM_IOCTLS_H + +#include + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define FIOQSIZE 0x545E + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif diff --git a/arch/arm/include/asm/ipcbuf.h b/arch/arm/include/asm/ipcbuf.h new file mode 100644 index 000000000000..97683975f7df --- /dev/null +++ b/arch/arm/include/asm/ipcbuf.h @@ -0,0 +1,29 @@ +#ifndef __ASMARM_IPCBUF_H +#define __ASMARM_IPCBUF_H + +/* + * The ipc64_perm structure for arm architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __ASMARM_IPCBUF_H */ diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h new file mode 100644 index 000000000000..9cb01907e43b --- /dev/null +++ b/arch/arm/include/asm/irq.h @@ -0,0 +1,28 @@ +#ifndef __ASM_ARM_IRQ_H +#define __ASM_ARM_IRQ_H + +#include + +#ifndef irq_canonicalize +#define irq_canonicalize(i) (i) +#endif + +#ifndef NR_IRQS +#define NR_IRQS 128 +#endif + +/* + * Use this value to indicate lack of interrupt + * capability + */ +#ifndef NO_IRQ +#define NO_IRQ ((unsigned int)(-1)) +#endif + +#ifndef __ASSEMBLY__ +struct irqaction; +extern void migrate_irqs(void); +#endif + +#endif + diff --git a/arch/arm/include/asm/irq_regs.h b/arch/arm/include/asm/irq_regs.h new file mode 100644 index 000000000000..3dd9c0b70270 --- /dev/null +++ b/arch/arm/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include diff --git a/arch/arm/include/asm/irqflags.h b/arch/arm/include/asm/irqflags.h new file mode 100644 index 000000000000..6d09974e6646 --- /dev/null +++ b/arch/arm/include/asm/irqflags.h @@ -0,0 +1,132 @@ +#ifndef __ASM_ARM_IRQFLAGS_H +#define __ASM_ARM_IRQFLAGS_H + +#ifdef __KERNEL__ + +#include + +/* + * CPU interrupt mask handling. + */ +#if __LINUX_ARM_ARCH__ >= 6 + +#define raw_local_irq_save(x) \ + ({ \ + __asm__ __volatile__( \ + "mrs %0, cpsr @ local_irq_save\n" \ + "cpsid i" \ + : "=r" (x) : : "memory", "cc"); \ + }) + +#define raw_local_irq_enable() __asm__("cpsie i @ __sti" : : : "memory", "cc") +#define raw_local_irq_disable() __asm__("cpsid i @ __cli" : : : "memory", "cc") +#define local_fiq_enable() __asm__("cpsie f @ __stf" : : : "memory", "cc") +#define local_fiq_disable() __asm__("cpsid f @ __clf" : : : "memory", "cc") + +#else + +/* + * Save the current interrupt enable state & disable IRQs + */ +#define raw_local_irq_save(x) \ + ({ \ + unsigned long temp; \ + (void) (&temp == &x); \ + __asm__ __volatile__( \ + "mrs %0, cpsr @ local_irq_save\n" \ +" orr %1, %0, #128\n" \ +" msr cpsr_c, %1" \ + : "=r" (x), "=r" (temp) \ + : \ + : "memory", "cc"); \ + }) + +/* + * Enable IRQs + */ +#define raw_local_irq_enable() \ + ({ \ + unsigned long temp; \ + __asm__ __volatile__( \ + "mrs %0, cpsr @ local_irq_enable\n" \ +" bic %0, %0, #128\n" \ +" msr cpsr_c, %0" \ + : "=r" (temp) \ + : \ + : "memory", "cc"); \ + }) + +/* + * Disable IRQs + */ +#define raw_local_irq_disable() \ + ({ \ + unsigned long temp; \ + __asm__ __volatile__( \ + "mrs %0, cpsr @ local_irq_disable\n" \ +" orr %0, %0, #128\n" \ +" msr cpsr_c, %0" \ + : "=r" (temp) \ + : \ + : "memory", "cc"); \ + }) + +/* + * Enable FIQs + */ +#define local_fiq_enable() \ + ({ \ + unsigned long temp; \ + __asm__ __volatile__( \ + "mrs %0, cpsr @ stf\n" \ +" bic %0, %0, #64\n" \ +" msr cpsr_c, %0" \ + : "=r" (temp) \ + : \ + : "memory", "cc"); \ + }) + +/* + * Disable FIQs + */ +#define local_fiq_disable() \ + ({ \ + unsigned long temp; \ + __asm__ __volatile__( \ + "mrs %0, cpsr @ clf\n" \ +" orr %0, %0, #64\n" \ +" msr cpsr_c, %0" \ + : "=r" (temp) \ + : \ + : "memory", "cc"); \ + }) + +#endif + +/* + * Save the current interrupt enable state. + */ +#define raw_local_save_flags(x) \ + ({ \ + __asm__ __volatile__( \ + "mrs %0, cpsr @ local_save_flags" \ + : "=r" (x) : : "memory", "cc"); \ + }) + +/* + * restore saved IRQ & FIQ state + */ +#define raw_local_irq_restore(x) \ + __asm__ __volatile__( \ + "msr cpsr_c, %0 @ local_irq_restore\n" \ + : \ + : "r" (x) \ + : "memory", "cc") + +#define raw_irqs_disabled_flags(flags) \ +({ \ + (int)((flags) & PSR_I_BIT); \ +}) + +#endif +#endif diff --git a/arch/arm/include/asm/kdebug.h b/arch/arm/include/asm/kdebug.h new file mode 100644 index 000000000000..6ece1b037665 --- /dev/null +++ b/arch/arm/include/asm/kdebug.h @@ -0,0 +1 @@ +#include diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h new file mode 100644 index 000000000000..c8986bb99ed5 --- /dev/null +++ b/arch/arm/include/asm/kexec.h @@ -0,0 +1,31 @@ +#ifndef _ARM_KEXEC_H +#define _ARM_KEXEC_H + +#ifdef CONFIG_KEXEC + +/* Maximum physical address we can use pages from */ +#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) +/* Maximum address we can reach in physical address mode */ +#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) +/* Maximum address we can use for the control code buffer */ +#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL) + +#define KEXEC_CONTROL_CODE_SIZE 4096 + +#define KEXEC_ARCH KEXEC_ARCH_ARM + +#define KEXEC_ARM_ATAGS_OFFSET 0x1000 +#define KEXEC_ARM_ZIMAGE_OFFSET 0x8000 + +#ifndef __ASSEMBLY__ + +struct kimage; +/* Provide a dummy definition to avoid build failures. */ +static inline void crash_setup_regs(struct pt_regs *newregs, + struct pt_regs *oldregs) { } + +#endif /* __ASSEMBLY__ */ + +#endif /* CONFIG_KEXEC */ + +#endif /* _ARM_KEXEC_H */ diff --git a/arch/arm/include/asm/kgdb.h b/arch/arm/include/asm/kgdb.h new file mode 100644 index 000000000000..67af4b841984 --- /dev/null +++ b/arch/arm/include/asm/kgdb.h @@ -0,0 +1,104 @@ +/* + * ARM KGDB support + * + * Author: Deepak Saxena + * + * Copyright (C) 2002 MontaVista Software Inc. + * + */ + +#ifndef __ARM_KGDB_H__ +#define __ARM_KGDB_H__ + +#include + +/* + * GDB assumes that we're a user process being debugged, so + * it will send us an SWI command to write into memory as the + * debug trap. When an SWI occurs, the next instruction addr is + * placed into R14_svc before jumping to the vector trap. + * This doesn't work for kernel debugging as we are already in SVC + * we would loose the kernel's LR, which is a bad thing. This + * is bad thing. + * + * By doing this as an undefined instruction trap, we force a mode + * switch from SVC to UND mode, allowing us to save full kernel state. + * + * We also define a KGDB_COMPILED_BREAK which can be used to compile + * in breakpoints. This is important for things like sysrq-G and for + * the initial breakpoint from trap_init(). + * + * Note to ARM HW designers: Add real trap support like SH && PPC to + * make our lives much much simpler. :) + */ +#define BREAK_INSTR_SIZE 4 +#define GDB_BREAKINST 0xef9f0001 +#define KGDB_BREAKINST 0xe7ffdefe +#define KGDB_COMPILED_BREAK 0xe7ffdeff +#define CACHE_FLUSH_IS_SAFE 1 + +#ifndef __ASSEMBLY__ + +static inline void arch_kgdb_breakpoint(void) +{ + asm(".word 0xe7ffdeff"); +} + +extern void kgdb_handle_bus_error(void); +extern int kgdb_fault_expected; + +#endif /* !__ASSEMBLY__ */ + +/* + * From Kevin Hilman: + * + * gdb is expecting the following registers layout. + * + * r0-r15: 1 long word each + * f0-f7: unused, 3 long words each !! + * fps: unused, 1 long word + * cpsr: 1 long word + * + * Even though f0-f7 and fps are not used, they need to be + * present in the registers sent for correct processing in + * the host-side gdb. + * + * In particular, it is crucial that CPSR is in the right place, + * otherwise gdb will not be able to correctly interpret stepping over + * conditional branches. + */ +#define _GP_REGS 16 +#define _FP_REGS 8 +#define _EXTRA_REGS 2 +#define GDB_MAX_REGS (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS) + +#define KGDB_MAX_NO_CPUS 1 +#define BUFMAX 400 +#define NUMREGBYTES (GDB_MAX_REGS << 2) +#define NUMCRITREGBYTES (32 << 2) + +#define _R0 0 +#define _R1 1 +#define _R2 2 +#define _R3 3 +#define _R4 4 +#define _R5 5 +#define _R6 6 +#define _R7 7 +#define _R8 8 +#define _R9 9 +#define _R10 10 +#define _FP 11 +#define _IP 12 +#define _SPT 13 +#define _LR 14 +#define _PC 15 +#define _CPSR (GDB_MAX_REGS - 1) + +/* + * So that we can denote the end of a frame for tracing, + * in the simple case: + */ +#define CFI_END_FRAME(func) __CFI_END_FRAME(_PC, _SPT, func) + +#endif /* __ASM_KGDB_H__ */ diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h new file mode 100644 index 000000000000..45def13ee17a --- /dev/null +++ b/arch/arm/include/asm/kmap_types.h @@ -0,0 +1,24 @@ +#ifndef __ARM_KMAP_TYPES_H +#define __ARM_KMAP_TYPES_H + +/* + * This is the "bare minimum". AIO seems to require this. + */ +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h new file mode 100644 index 000000000000..a5d0d99ad387 --- /dev/null +++ b/arch/arm/include/asm/kprobes.h @@ -0,0 +1,79 @@ +/* + * arch/arm/include/asm/kprobes.h + * + * Copyright (C) 2006, 2007 Motorola Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef _ARM_KPROBES_H +#define _ARM_KPROBES_H + +#include +#include +#include + +#define __ARCH_WANT_KPROBES_INSN_SLOT +#define MAX_INSN_SIZE 2 +#define MAX_STACK_SIZE 64 /* 32 would probably be OK */ + +/* + * This undefined instruction must be unique and + * reserved solely for kprobes' use. + */ +#define KPROBE_BREAKPOINT_INSTRUCTION 0xe7f001f8 + +#define regs_return_value(regs) ((regs)->ARM_r0) +#define flush_insn_slot(p) do { } while (0) +#define kretprobe_blacklist_size 0 + +typedef u32 kprobe_opcode_t; + +struct kprobe; +typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *); + +/* Architecture specific copy of original instruction. */ +struct arch_specific_insn { + kprobe_opcode_t *insn; + kprobe_insn_handler_t *insn_handler; +}; + +struct prev_kprobe { + struct kprobe *kp; + unsigned int status; +}; + +/* per-cpu kprobe control block */ +struct kprobe_ctlblk { + unsigned int kprobe_status; + struct prev_kprobe prev_kprobe; + struct pt_regs jprobe_saved_regs; + char jprobes_stack[MAX_STACK_SIZE]; +}; + +void arch_remove_kprobe(struct kprobe *); +void kretprobe_trampoline(void); + +int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr); +int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr); +int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); + +enum kprobe_insn { + INSN_REJECTED, + INSN_GOOD, + INSN_GOOD_NO_SLOT +}; + +enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t, + struct arch_specific_insn *); +void __init arm_kprobe_decode_init(void); + +#endif /* _ARM_KPROBES_H */ diff --git a/arch/arm/include/asm/leds.h b/arch/arm/include/asm/leds.h new file mode 100644 index 000000000000..c545739f39b7 --- /dev/null +++ b/arch/arm/include/asm/leds.h @@ -0,0 +1,50 @@ +/* + * arch/arm/include/asm/leds.h + * + * Copyright (C) 1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Event-driven interface for LEDs on machines + * Added led_start and led_stop- Alex Holden, 28th Dec 1998. + */ +#ifndef ASM_ARM_LEDS_H +#define ASM_ARM_LEDS_H + + +typedef enum { + led_idle_start, + led_idle_end, + led_timer, + led_start, + led_stop, + led_claim, /* override idle & timer leds */ + led_release, /* restore idle & timer leds */ + led_start_timer_mode, + led_stop_timer_mode, + led_green_on, + led_green_off, + led_amber_on, + led_amber_off, + led_red_on, + led_red_off, + led_blue_on, + led_blue_off, + /* + * I want this between led_timer and led_start, but + * someone has decided to export this to user space + */ + led_halted +} led_event_t; + +/* Use this routine to handle LEDs */ + +#ifdef CONFIG_LEDS +extern void (*leds_event)(led_event_t); +#else +#define leds_event(e) +#endif + +#endif diff --git a/arch/arm/include/asm/limits.h b/arch/arm/include/asm/limits.h new file mode 100644 index 000000000000..08d8c6600804 --- /dev/null +++ b/arch/arm/include/asm/limits.h @@ -0,0 +1,11 @@ +#ifndef __ASM_PIPE_H +#define __ASM_PIPE_H + +#ifndef PAGE_SIZE +#include +#endif + +#define PIPE_BUF PAGE_SIZE + +#endif + diff --git a/arch/arm/include/asm/linkage.h b/arch/arm/include/asm/linkage.h new file mode 100644 index 000000000000..5a25632b1bc0 --- /dev/null +++ b/arch/arm/include/asm/linkage.h @@ -0,0 +1,11 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define __ALIGN .align 0 +#define __ALIGN_STR ".align 0" + +#define ENDPROC(name) \ + .type name, %function; \ + END(name) + +#endif diff --git a/arch/arm/include/asm/local.h b/arch/arm/include/asm/local.h new file mode 100644 index 000000000000..c11c530f74d0 --- /dev/null +++ b/arch/arm/include/asm/local.h @@ -0,0 +1 @@ +#include diff --git a/arch/arm/include/asm/locks.h b/arch/arm/include/asm/locks.h new file mode 100644 index 000000000000..ef4c897772d1 --- /dev/null +++ b/arch/arm/include/asm/locks.h @@ -0,0 +1,274 @@ +/* + * arch/arm/include/asm/locks.h + * + * Copyright (C) 2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Interrupt safe locking assembler. + */ +#ifndef __ASM_PROC_LOCKS_H +#define __ASM_PROC_LOCKS_H + +#if __LINUX_ARM_ARCH__ >= 6 + +#define __down_op(ptr,fail) \ + ({ \ + __asm__ __volatile__( \ + "@ down_op\n" \ +"1: ldrex lr, [%0]\n" \ +" sub lr, lr, %1\n" \ +" strex ip, lr, [%0]\n" \ +" teq ip, #0\n" \ +" bne 1b\n" \ +" teq lr, #0\n" \ +" movmi ip, %0\n" \ +" blmi " #fail \ + : \ + : "r" (ptr), "I" (1) \ + : "ip", "lr", "cc"); \ + smp_mb(); \ + }) + +#define __down_op_ret(ptr,fail) \ + ({ \ + unsigned int ret; \ + __asm__ __volatile__( \ + "@ down_op_ret\n" \ +"1: ldrex lr, [%1]\n" \ +" sub lr, lr, %2\n" \ +" strex ip, lr, [%1]\n" \ +" teq ip, #0\n" \ +" bne 1b\n" \ +" teq lr, #0\n" \ +" movmi ip, %1\n" \ +" movpl ip, #0\n" \ +" blmi " #fail "\n" \ +" mov %0, ip" \ + : "=&r" (ret) \ + : "r" (ptr), "I" (1) \ + : "ip", "lr", "cc"); \ + smp_mb(); \ + ret; \ + }) + +#define __up_op(ptr,wake) \ + ({ \ + smp_mb(); \ + __asm__ __volatile__( \ + "@ up_op\n" \ +"1: ldrex lr, [%0]\n" \ +" add lr, lr, %1\n" \ +" strex ip, lr, [%0]\n" \ +" teq ip, #0\n" \ +" bne 1b\n" \ +" cmp lr, #0\n" \ +" movle ip, %0\n" \ +" blle " #wake \ + : \ + : "r" (ptr), "I" (1) \ + : "ip", "lr", "cc"); \ + }) + +/* + * The value 0x01000000 supports up to 128 processors and + * lots of processes. BIAS must be chosen such that sub'ing + * BIAS once per CPU will result in the long remaining + * negative. + */ +#define RW_LOCK_BIAS 0x01000000 +#define RW_LOCK_BIAS_STR "0x01000000" + +#define __down_op_write(ptr,fail) \ + ({ \ + __asm__ __volatile__( \ + "@ down_op_write\n" \ +"1: ldrex lr, [%0]\n" \ +" sub lr, lr, %1\n" \ +" strex ip, lr, [%0]\n" \ +" teq ip, #0\n" \ +" bne 1b\n" \ +" teq lr, #0\n" \ +" movne ip, %0\n" \ +" blne " #fail \ + : \ + : "r" (ptr), "I" (RW_LOCK_BIAS) \ + : "ip", "lr", "cc"); \ + smp_mb(); \ + }) + +#define __up_op_write(ptr,wake) \ + ({ \ + smp_mb(); \ + __asm__ __volatile__( \ + "@ up_op_write\n" \ +"1: ldrex lr, [%0]\n" \ +" adds lr, lr, %1\n" \ +" strex ip, lr, [%0]\n" \ +" teq ip, #0\n" \ +" bne 1b\n" \ +" movcs ip, %0\n" \ +" blcs " #wake \ + : \ + : "r" (ptr), "I" (RW_LOCK_BIAS) \ + : "ip", "lr", "cc"); \ + }) + +#define __down_op_read(ptr,fail) \ + __down_op(ptr, fail) + +#define __up_op_read(ptr,wake) \ + ({ \ + smp_mb(); \ + __asm__ __volatile__( \ + "@ up_op_read\n" \ +"1: ldrex lr, [%0]\n" \ +" add lr, lr, %1\n" \ +" strex ip, lr, [%0]\n" \ +" teq ip, #0\n" \ +" bne 1b\n" \ +" teq lr, #0\n" \ +" moveq ip, %0\n" \ +" bleq " #wake \ + : \ + : "r" (ptr), "I" (1) \ + : "ip", "lr", "cc"); \ + }) + +#else + +#define __down_op(ptr,fail) \ + ({ \ + __asm__ __volatile__( \ + "@ down_op\n" \ +" mrs ip, cpsr\n" \ +" orr lr, ip, #128\n" \ +" msr cpsr_c, lr\n" \ +" ldr lr, [%0]\n" \ +" subs lr, lr, %1\n" \ +" str lr, [%0]\n" \ +" msr cpsr_c, ip\n" \ +" movmi ip, %0\n" \ +" blmi " #fail \ + : \ + : "r" (ptr), "I" (1) \ + : "ip", "lr", "cc"); \ + smp_mb(); \ + }) + +#define __down_op_ret(ptr,fail) \ + ({ \ + unsigned int ret; \ + __asm__ __volatile__( \ + "@ down_op_ret\n" \ +" mrs ip, cpsr\n" \ +" orr lr, ip, #128\n" \ +" msr cpsr_c, lr\n" \ +" ldr lr, [%1]\n" \ +" subs lr, lr, %2\n" \ +" str lr, [%1]\n" \ +" msr cpsr_c, ip\n" \ +" movmi ip, %1\n" \ +" movpl ip, #0\n" \ +" blmi " #fail "\n" \ +" mov %0, ip" \ + : "=&r" (ret) \ + : "r" (ptr), "I" (1) \ + : "ip", "lr", "cc"); \ + smp_mb(); \ + ret; \ + }) + +#define __up_op(ptr,wake) \ + ({ \ + smp_mb(); \ + __asm__ __volatile__( \ + "@ up_op\n" \ +" mrs ip, cpsr\n" \ +" orr lr, ip, #128\n" \ +" msr cpsr_c, lr\n" \ +" ldr lr, [%0]\n" \ +" adds lr, lr, %1\n" \ +" str lr, [%0]\n" \ +" msr cpsr_c, ip\n" \ +" movle ip, %0\n" \ +" blle " #wake \ + : \ + : "r" (ptr), "I" (1) \ + : "ip", "lr", "cc"); \ + }) + +/* + * The value 0x01000000 supports up to 128 processors and + * lots of processes. BIAS must be chosen such that sub'ing + * BIAS once per CPU will result in the long remaining + * negative. + */ +#define RW_LOCK_BIAS 0x01000000 +#define RW_LOCK_BIAS_STR "0x01000000" + +#define __down_op_write(ptr,fail) \ + ({ \ + __asm__ __volatile__( \ + "@ down_op_write\n" \ +" mrs ip, cpsr\n" \ +" orr lr, ip, #128\n" \ +" msr cpsr_c, lr\n" \ +" ldr lr, [%0]\n" \ +" subs lr, lr, %1\n" \ +" str lr, [%0]\n" \ +" msr cpsr_c, ip\n" \ +" movne ip, %0\n" \ +" blne " #fail \ + : \ + : "r" (ptr), "I" (RW_LOCK_BIAS) \ + : "ip", "lr", "cc"); \ + smp_mb(); \ + }) + +#define __up_op_write(ptr,wake) \ + ({ \ + __asm__ __volatile__( \ + "@ up_op_write\n" \ +" mrs ip, cpsr\n" \ +" orr lr, ip, #128\n" \ +" msr cpsr_c, lr\n" \ +" ldr lr, [%0]\n" \ +" adds lr, lr, %1\n" \ +" str lr, [%0]\n" \ +" msr cpsr_c, ip\n" \ +" movcs ip, %0\n" \ +" blcs " #wake \ + : \ + : "r" (ptr), "I" (RW_LOCK_BIAS) \ + : "ip", "lr", "cc"); \ + smp_mb(); \ + }) + +#define __down_op_read(ptr,fail) \ + __down_op(ptr, fail) + +#define __up_op_read(ptr,wake) \ + ({ \ + smp_mb(); \ + __asm__ __volatile__( \ + "@ up_op_read\n" \ +" mrs ip, cpsr\n" \ +" orr lr, ip, #128\n" \ +" msr cpsr_c, lr\n" \ +" ldr lr, [%0]\n" \ +" adds lr, lr, %1\n" \ +" str lr, [%0]\n" \ +" msr cpsr_c, ip\n" \ +" moveq ip, %0\n" \ +" bleq " #wake \ + : \ + : "r" (ptr), "I" (1) \ + : "ip", "lr", "cc"); \ + }) + +#endif + +#endif diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h new file mode 100644 index 000000000000..c59842dc7cb8 --- /dev/null +++ b/arch/arm/include/asm/mach/arch.h @@ -0,0 +1,60 @@ +/* + * arch/arm/include/asm/mach/arch.h + * + * Copyright (C) 2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASSEMBLY__ + +struct tag; +struct meminfo; +struct sys_timer; + +struct machine_desc { + /* + * Note! The first four elements are used + * by assembler code in head.S, head-common.S + */ + unsigned int nr; /* architecture number */ + unsigned int phys_io; /* start of physical io */ + unsigned int io_pg_offst; /* byte offset for io + * page tabe entry */ + + const char *name; /* architecture name */ + unsigned long boot_params; /* tagged list */ + + unsigned int video_start; /* start of video RAM */ + unsigned int video_end; /* end of video RAM */ + + unsigned int reserve_lp0 :1; /* never has lp0 */ + unsigned int reserve_lp1 :1; /* never has lp1 */ + unsigned int reserve_lp2 :1; /* never has lp2 */ + unsigned int soft_reboot :1; /* soft reboot */ + void (*fixup)(struct machine_desc *, + struct tag *, char **, + struct meminfo *); + void (*map_io)(void);/* IO mapping function */ + void (*init_irq)(void); + struct sys_timer *timer; /* system tick timer */ + void (*init_machine)(void); +}; + +/* + * Set of macros to define architecture features. This is built into + * a table by the linker. + */ +#define MACHINE_START(_type,_name) \ +static const struct machine_desc __mach_desc_##_type \ + __used \ + __attribute__((__section__(".arch.info.init"))) = { \ + .nr = MACH_TYPE_##_type, \ + .name = _name, + +#define MACHINE_END \ +}; + +#endif diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h new file mode 100644 index 000000000000..fc7278ea7146 --- /dev/null +++ b/arch/arm/include/asm/mach/dma.h @@ -0,0 +1,57 @@ +/* + * arch/arm/include/asm/mach/dma.h + * + * Copyright (C) 1998-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This header file describes the interface between the generic DMA handler + * (dma.c) and the architecture-specific DMA backends (dma-*.c) + */ + +struct dma_struct; +typedef struct dma_struct dma_t; + +struct dma_ops { + int (*request)(dmach_t, dma_t *); /* optional */ + void (*free)(dmach_t, dma_t *); /* optional */ + void (*enable)(dmach_t, dma_t *); /* mandatory */ + void (*disable)(dmach_t, dma_t *); /* mandatory */ + int (*residue)(dmach_t, dma_t *); /* optional */ + int (*setspeed)(dmach_t, dma_t *, int); /* optional */ + char *type; +}; + +struct dma_struct { + void *addr; /* single DMA address */ + unsigned long count; /* single DMA size */ + struct scatterlist buf; /* single DMA */ + int sgcount; /* number of DMA SG */ + struct scatterlist *sg; /* DMA Scatter-Gather List */ + + unsigned int active:1; /* Transfer active */ + unsigned int invalid:1; /* Address/Count changed */ + + dmamode_t dma_mode; /* DMA mode */ + int speed; /* DMA speed */ + + unsigned int lock; /* Device is allocated */ + const char *device_id; /* Device name */ + + unsigned int dma_base; /* Controller base address */ + int dma_irq; /* Controller IRQ */ + struct scatterlist cur_sg; /* Current controller buffer */ + unsigned int state; + + struct dma_ops *d_ops; +}; + +/* Prototype: void arch_dma_init(dma) + * Purpose : Initialise architecture specific DMA + * Params : dma - pointer to array of DMA structures + */ +extern void arch_dma_init(dma_t *dma); + +extern void isa_init_dma(dma_t *dma); diff --git a/arch/arm/include/asm/mach/flash.h b/arch/arm/include/asm/mach/flash.h new file mode 100644 index 000000000000..4ca69fe2c850 --- /dev/null +++ b/arch/arm/include/asm/mach/flash.h @@ -0,0 +1,39 @@ +/* + * arch/arm/include/asm/mach/flash.h + * + * Copyright (C) 2003 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_MACH_FLASH_H +#define ASMARM_MACH_FLASH_H + +struct mtd_partition; +struct mtd_info; + +/* + * map_name: the map probe function name + * name: flash device name (eg, as used with mtdparts=) + * width: width of mapped device + * init: method called at driver/device initialisation + * exit: method called at driver/device removal + * set_vpp: method called to enable or disable VPP + * mmcontrol: method called to enable or disable Sync. Burst Read in OneNAND + * parts: optional array of mtd_partitions for static partitioning + * nr_parts: number of mtd_partitions for static partitoning + */ +struct flash_platform_data { + const char *map_name; + const char *name; + unsigned int width; + int (*init)(void); + void (*exit)(void); + void (*set_vpp)(int on); + void (*mmcontrol)(struct mtd_info *mtd, int sync_read); + struct mtd_partition *parts; + unsigned int nr_parts; +}; + +#endif diff --git a/arch/arm/include/asm/mach/irda.h b/arch/arm/include/asm/mach/irda.h new file mode 100644 index 000000000000..38f77b5e56cf --- /dev/null +++ b/arch/arm/include/asm/mach/irda.h @@ -0,0 +1,20 @@ +/* + * arch/arm/include/asm/mach/irda.h + * + * Copyright (C) 2004 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_MACH_IRDA_H +#define __ASM_ARM_MACH_IRDA_H + +struct irda_platform_data { + int (*startup)(struct device *); + void (*shutdown)(struct device *); + int (*set_power)(struct device *, unsigned int state); + void (*set_speed)(struct device *, unsigned int speed); +}; + +#endif diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h new file mode 100644 index 000000000000..c57b52ce574a --- /dev/null +++ b/arch/arm/include/asm/mach/irq.h @@ -0,0 +1,54 @@ +/* + * arch/arm/include/asm/mach/irq.h + * + * Copyright (C) 1995-2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_MACH_IRQ_H +#define __ASM_ARM_MACH_IRQ_H + +#include + +struct seq_file; + +/* + * This is internal. Do not use it. + */ +extern void (*init_arch_irq)(void); +extern void init_FIQ(void); +extern int show_fiq_list(struct seq_file *, void *); + +/* + * Obsolete inline function for calling irq descriptor handlers. + */ +static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc) +{ + desc->handle_irq(irq, desc); +} + +void set_irq_flags(unsigned int irq, unsigned int flags); + +#define IRQF_VALID (1 << 0) +#define IRQF_PROBE (1 << 1) +#define IRQF_NOAUTOEN (1 << 2) + +/* + * This is for easy migration, but should be changed in the source + */ +#define do_bad_IRQ(irq,desc) \ +do { \ + spin_lock(&desc->lock); \ + handle_bad_irq(irq, desc); \ + spin_unlock(&desc->lock); \ +} while(0) + +extern unsigned long irq_err_count; +static inline void ack_bad_irq(int irq) +{ + irq_err_count++; +} + +#endif diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h new file mode 100644 index 000000000000..06f583b13999 --- /dev/null +++ b/arch/arm/include/asm/mach/map.h @@ -0,0 +1,36 @@ +/* + * arch/arm/include/asm/map.h + * + * Copyright (C) 1999-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Page table mapping constructs and function prototypes + */ +#include + +struct map_desc { + unsigned long virtual; + unsigned long pfn; + unsigned long length; + unsigned int type; +}; + +/* types 0-3 are defined in asm/io.h */ +#define MT_CACHECLEAN 4 +#define MT_MINICLEAN 5 +#define MT_LOW_VECTORS 6 +#define MT_HIGH_VECTORS 7 +#define MT_MEMORY 8 +#define MT_ROM 9 + +#define MT_NONSHARED_DEVICE MT_DEVICE_NONSHARED +#define MT_IXP2000_DEVICE MT_DEVICE_IXP2000 + +#ifdef CONFIG_MMU +extern void iotable_init(struct map_desc *, int); +#else +#define iotable_init(map,num) do { } while (0) +#endif diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h new file mode 100644 index 000000000000..4da332b03144 --- /dev/null +++ b/arch/arm/include/asm/mach/mmc.h @@ -0,0 +1,15 @@ +/* + * arch/arm/include/asm/mach/mmc.h + */ +#ifndef ASMARM_MACH_MMC_H +#define ASMARM_MACH_MMC_H + +#include + +struct mmc_platform_data { + unsigned int ocr_mask; /* available voltages */ + u32 (*translate_vdd)(struct device *, unsigned int); + unsigned int (*status)(struct device *); +}; + +#endif diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h new file mode 100644 index 000000000000..32da1ae17e06 --- /dev/null +++ b/arch/arm/include/asm/mach/pci.h @@ -0,0 +1,72 @@ +/* + * arch/arm/include/asm/mach/pci.h + * + * Copyright (C) 2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +struct pci_sys_data; +struct pci_bus; + +struct hw_pci { + struct list_head buses; + int nr_controllers; + int (*setup)(int nr, struct pci_sys_data *); + struct pci_bus *(*scan)(int nr, struct pci_sys_data *); + void (*preinit)(void); + void (*postinit)(void); + u8 (*swizzle)(struct pci_dev *dev, u8 *pin); + int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin); +}; + +/* + * Per-controller structure + */ +struct pci_sys_data { + struct list_head node; + int busnr; /* primary bus number */ + u64 mem_offset; /* bus->cpu memory mapping offset */ + unsigned long io_offset; /* bus->cpu IO mapping offset */ + struct pci_bus *bus; /* PCI bus */ + struct resource *resource[3]; /* Primary PCI bus resources */ + /* Bridge swizzling */ + u8 (*swizzle)(struct pci_dev *, u8 *); + /* IRQ mapping */ + int (*map_irq)(struct pci_dev *, u8, u8); + struct hw_pci *hw; +}; + +/* + * This is the standard PCI-PCI bridge swizzling algorithm. + */ +u8 pci_std_swizzle(struct pci_dev *dev, u8 *pinp); + +/* + * Call this with your hw_pci struct to initialise the PCI system. + */ +void pci_common_init(struct hw_pci *); + +/* + * PCI controllers + */ +extern int iop3xx_pci_setup(int nr, struct pci_sys_data *); +extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *); +extern void iop3xx_pci_preinit(void); +extern void iop3xx_pci_preinit_cond(void); + +extern int dc21285_setup(int nr, struct pci_sys_data *); +extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *); +extern void dc21285_preinit(void); +extern void dc21285_postinit(void); + +extern int via82c505_setup(int nr, struct pci_sys_data *); +extern struct pci_bus *via82c505_scan_bus(int nr, struct pci_sys_data *); +extern void via82c505_init(void *sysdata); + +extern int pci_v3_setup(int nr, struct pci_sys_data *); +extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *); +extern void pci_v3_preinit(void); +extern void pci_v3_postinit(void); diff --git a/arch/arm/include/asm/mach/serial_at91.h b/arch/arm/include/asm/mach/serial_at91.h new file mode 100644 index 000000000000..ea6d063923b8 --- /dev/null +++ b/arch/arm/include/asm/mach/serial_at91.h @@ -0,0 +1,33 @@ +/* + * arch/arm/include/asm/mach/serial_at91.h + * + * Based on serial_sa1100.h by Nicolas Pitre + * + * Copyright (C) 2002 ATMEL Rousset + * + * Low level machine dependent UART functions. + */ + +struct uart_port; + +/* + * This is a temporary structure for registering these + * functions; it is intended to be discarded after boot. + */ +struct atmel_port_fns { + void (*set_mctrl)(struct uart_port *, u_int); + u_int (*get_mctrl)(struct uart_port *); + void (*enable_ms)(struct uart_port *); + void (*pm)(struct uart_port *, u_int, u_int); + int (*set_wake)(struct uart_port *, u_int); + int (*open)(struct uart_port *); + void (*close)(struct uart_port *); +}; + +#if defined(CONFIG_SERIAL_ATMEL) +void atmel_register_uart_fns(struct atmel_port_fns *fns); +#else +#define atmel_register_uart_fns(fns) do { } while (0) +#endif + + diff --git a/arch/arm/include/asm/mach/serial_sa1100.h b/arch/arm/include/asm/mach/serial_sa1100.h new file mode 100644 index 000000000000..d09064bf95a0 --- /dev/null +++ b/arch/arm/include/asm/mach/serial_sa1100.h @@ -0,0 +1,31 @@ +/* + * arch/arm/include/asm/mach/serial_sa1100.h + * + * Author: Nicolas Pitre + * + * Moved and changed lots, Russell King + * + * Low level machine dependent UART functions. + */ + +struct uart_port; +struct uart_info; + +/* + * This is a temporary structure for registering these + * functions; it is intended to be discarded after boot. + */ +struct sa1100_port_fns { + void (*set_mctrl)(struct uart_port *, u_int); + u_int (*get_mctrl)(struct uart_port *); + void (*pm)(struct uart_port *, u_int, u_int); + int (*set_wake)(struct uart_port *, u_int); +}; + +#ifdef CONFIG_SERIAL_SA1100 +void sa1100_register_uart_fns(struct sa1100_port_fns *fns); +void sa1100_register_uart(int idx, int port); +#else +#define sa1100_register_uart_fns(fns) do { } while (0) +#define sa1100_register_uart(idx,port) do { } while (0) +#endif diff --git a/arch/arm/include/asm/mach/sharpsl_param.h b/arch/arm/include/asm/mach/sharpsl_param.h new file mode 100644 index 000000000000..7a24ecf04220 --- /dev/null +++ b/arch/arm/include/asm/mach/sharpsl_param.h @@ -0,0 +1,37 @@ +/* + * Hardware parameter area specific to Sharp SL series devices + * + * Copyright (c) 2005 Richard Purdie + * + * Based on Sharp's 2.4 kernel patches + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +struct sharpsl_param_info { + unsigned int comadj_keyword; + unsigned int comadj; + + unsigned int uuid_keyword; + unsigned char uuid[16]; + + unsigned int touch_keyword; + unsigned int touch_xp; + unsigned int touch_yp; + unsigned int touch_xd; + unsigned int touch_yd; + + unsigned int adadj_keyword; + unsigned int adadj; + + unsigned int phad_keyword; + unsigned int phadadj; +} __attribute__((packed)); + + +extern struct sharpsl_param_info sharpsl_param; +extern void sharpsl_save_param(void); + diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h new file mode 100644 index 000000000000..b2cc1fcd0400 --- /dev/null +++ b/arch/arm/include/asm/mach/time.h @@ -0,0 +1,57 @@ +/* + * arch/arm/include/asm/mach/time.h + * + * Copyright (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_MACH_TIME_H +#define __ASM_ARM_MACH_TIME_H + +#include + +/* + * This is our kernel timer structure. + * + * - init + * Initialise the kernels jiffy timer source, claim interrupt + * using setup_irq. This is called early on during initialisation + * while interrupts are still disabled on the local CPU. + * - suspend + * Suspend the kernel jiffy timer source, if necessary. This + * is called with interrupts disabled, after all normal devices + * have been suspended. If no action is required, set this to + * NULL. + * - resume + * Resume the kernel jiffy timer source, if necessary. This + * is called with interrupts disabled before any normal devices + * are resumed. If no action is required, set this to NULL. + * - offset + * Return the timer offset in microseconds since the last timer + * interrupt. Note: this must take account of any unprocessed + * timer interrupt which may be pending. + */ +struct sys_timer { + struct sys_device dev; + void (*init)(void); + void (*suspend)(void); + void (*resume)(void); +#ifndef CONFIG_GENERIC_TIME + unsigned long (*offset)(void); +#endif +}; + +extern struct sys_timer *system_timer; +extern void timer_tick(void); + +/* + * Kernel time keeping support. + */ +struct timespec; +extern int (*set_rtc)(void); +extern void save_time_delta(struct timespec *delta, struct timespec *rtc); +extern void restore_time_delta(struct timespec *delta, struct timespec *rtc); + +#endif diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h new file mode 100644 index 000000000000..270902c353fd --- /dev/null +++ b/arch/arm/include/asm/mach/udc_pxa2xx.h @@ -0,0 +1,29 @@ +/* + * arch/arm/include/asm/mach/udc_pxa2xx.h + * + * This supports machine-specific differences in how the PXA2xx + * USB Device Controller (UDC) is wired. + * + * It is set in linux/arch/arm/mach-pxa/.c or in + * linux/arch/mach-ixp4xx/.c and used in + * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c + */ + +struct pxa2xx_udc_mach_info { + int (*udc_is_connected)(void); /* do we see host? */ + void (*udc_command)(int cmd); +#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */ +#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */ + + /* Boards following the design guidelines in the developer's manual, + * with on-chip GPIOs not Lubbock's weird hardware, can have a sane + * VBUS IRQ and omit the methods above. Store the GPIO number + * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits. + * Note that sometimes the signals go through inverters... + */ + bool gpio_vbus_inverted; + u16 gpio_vbus; /* high == vbus present */ + bool gpio_pullup_inverted; + u16 gpio_pullup; /* high == pullup activated */ +}; + diff --git a/arch/arm/include/asm/mc146818rtc.h b/arch/arm/include/asm/mc146818rtc.h new file mode 100644 index 000000000000..7b81e0c42543 --- /dev/null +++ b/arch/arm/include/asm/mc146818rtc.h @@ -0,0 +1,28 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef _ASM_MC146818RTC_H +#define _ASM_MC146818RTC_H + +#include +#include + +#ifndef RTC_PORT +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ +#endif + +/* + * The yet supported machines all access the RTC index register via + * an ISA port access but the way to access the date register differs ... + */ +#define CMOS_READ(addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +inb_p(RTC_PORT(1)); \ +}) +#define CMOS_WRITE(val, addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +outb_p((val),RTC_PORT(1)); \ +}) + +#endif /* _ASM_MC146818RTC_H */ diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h new file mode 100644 index 000000000000..92069221dca9 --- /dev/null +++ b/arch/arm/include/asm/memory.h @@ -0,0 +1,334 @@ +/* + * arch/arm/include/asm/memory.h + * + * Copyright (C) 2000-2002 Russell King + * modification for nommu, Hyok S. Choi, 2004 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Note: this file should not be included by non-asm/.h files + */ +#ifndef __ASM_ARM_MEMORY_H +#define __ASM_ARM_MEMORY_H + +/* + * Allow for constants defined here to be used from assembly code + * by prepending the UL suffix only with actual C code compilation. + */ +#ifndef __ASSEMBLY__ +#define UL(x) (x##UL) +#else +#define UL(x) (x) +#endif + +#include +#include +#include + +#ifdef CONFIG_MMU + +#ifndef TASK_SIZE +/* + * TASK_SIZE - the maximum size of a user space task. + * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area + */ +#define TASK_SIZE UL(0xbf000000) +#define TASK_UNMAPPED_BASE UL(0x40000000) +#endif + +/* + * The maximum size of a 26-bit user space task. + */ +#define TASK_SIZE_26 UL(0x04000000) + +/* + * Page offset: 3GB + */ +#ifndef PAGE_OFFSET +#define PAGE_OFFSET UL(0xc0000000) +#endif + +/* + * The module space lives between the addresses given by TASK_SIZE + * and PAGE_OFFSET - it must be within 32MB of the kernel text. + */ +#define MODULE_END (PAGE_OFFSET) +#define MODULE_START (MODULE_END - 16*1048576) + +#if TASK_SIZE > MODULE_START +#error Top of user space clashes with start of module space +#endif + +/* + * The XIP kernel gets mapped at the bottom of the module vm area. + * Since we use sections to map it, this macro replaces the physical address + * with its virtual address while keeping offset from the base section. + */ +#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff)) + +/* + * Allow 16MB-aligned ioremap pages + */ +#define IOREMAP_MAX_ORDER 24 + +#else /* CONFIG_MMU */ + +/* + * The limitation of user task size can grow up to the end of free ram region. + * It is difficult to define and perhaps will never meet the original meaning + * of this define that was meant to. + * Fortunately, there is no reference for this in noMMU mode, for now. + */ +#ifndef TASK_SIZE +#define TASK_SIZE (CONFIG_DRAM_SIZE) +#endif + +#ifndef TASK_UNMAPPED_BASE +#define TASK_UNMAPPED_BASE UL(0x00000000) +#endif + +#ifndef PHYS_OFFSET +#define PHYS_OFFSET (CONFIG_DRAM_BASE) +#endif + +#ifndef END_MEM +#define END_MEM (CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE) +#endif + +#ifndef PAGE_OFFSET +#define PAGE_OFFSET (PHYS_OFFSET) +#endif + +/* + * The module can be at any place in ram in nommu mode. + */ +#define MODULE_END (END_MEM) +#define MODULE_START (PHYS_OFFSET) + +#endif /* !CONFIG_MMU */ + +/* + * Size of DMA-consistent memory region. Must be multiple of 2M, + * between 2MB and 14MB inclusive. + */ +#ifndef CONSISTENT_DMA_SIZE +#define CONSISTENT_DMA_SIZE SZ_2M +#endif + +/* + * Physical vs virtual RAM address space conversion. These are + * private definitions which should NOT be used outside memory.h + * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. + */ +#ifndef __virt_to_phys +#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET) +#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) +#endif + +/* + * Convert a physical address to a Page Frame Number and back + */ +#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT) +#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT) + +#ifndef __ASSEMBLY__ + +/* + * The DMA mask corresponding to the maximum bus address allocatable + * using GFP_DMA. The default here places no restriction on DMA + * allocations. This must be the smallest DMA mask in the system, + * so a successful GFP_DMA allocation will always satisfy this. + */ +#ifndef ISA_DMA_THRESHOLD +#define ISA_DMA_THRESHOLD (0xffffffffULL) +#endif + +#ifndef arch_adjust_zones +#define arch_adjust_zones(node,size,holes) do { } while (0) +#endif + +/* + * PFNs are used to describe any physical page; this means + * PFN 0 == physical address 0. + * + * This is the PFN of the first RAM page in the kernel + * direct-mapped view. We assume this is the first page + * of RAM in the mem_map as well. + */ +#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT) + +/* + * These are *only* valid on the kernel direct mapped RAM memory. + * Note: Drivers should NOT use these. They are the wrong + * translation for translating DMA addresses. Use the driver + * DMA support - see dma-mapping.h. + */ +static inline unsigned long virt_to_phys(void *x) +{ + return __virt_to_phys((unsigned long)(x)); +} + +static inline void *phys_to_virt(unsigned long x) +{ + return (void *)(__phys_to_virt((unsigned long)(x))); +} + +/* + * Drivers should NOT use these either. + */ +#define __pa(x) __virt_to_phys((unsigned long)(x)) +#define __va(x) ((void *)__phys_to_virt((unsigned long)(x))) +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) + +/* + * Virtual <-> DMA view memory address translations + * Again, these are *only* valid on the kernel direct mapped RAM + * memory. Use of these is *deprecated* (and that doesn't mean + * use the __ prefixed forms instead.) See dma-mapping.h. + */ +static inline __deprecated unsigned long virt_to_bus(void *x) +{ + return __virt_to_bus((unsigned long)x); +} + +static inline __deprecated void *bus_to_virt(unsigned long x) +{ + return (void *)__bus_to_virt(x); +} + +/* + * Conversion between a struct page and a physical address. + * + * Note: when converting an unknown physical address to a + * struct page, the resulting pointer must be validated + * using VALID_PAGE(). It must return an invalid struct page + * for any physical address not corresponding to a system + * RAM address. + * + * page_to_pfn(page) convert a struct page * to a PFN number + * pfn_to_page(pfn) convert a _valid_ PFN number to struct page * + * pfn_valid(pfn) indicates whether a PFN number is valid + * + * virt_to_page(k) convert a _valid_ virtual address to struct page * + * virt_addr_valid(k) indicates whether a virtual address is valid + */ +#ifndef CONFIG_DISCONTIGMEM + +#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET + +#ifndef CONFIG_SPARSEMEM +#define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr)) +#endif + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) + +#define PHYS_TO_NID(addr) (0) + +#else /* CONFIG_DISCONTIGMEM */ + +/* + * This is more complex. We have a set of mem_map arrays spread + * around in memory. + */ +#include + +#define arch_pfn_to_nid(pfn) PFN_TO_NID(pfn) +#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT) + +#define pfn_valid(pfn) \ + ({ \ + unsigned int nid = PFN_TO_NID(pfn); \ + int valid = nid < MAX_NUMNODES; \ + if (valid) { \ + pg_data_t *node = NODE_DATA(nid); \ + valid = (pfn - node->node_start_pfn) < \ + node->node_spanned_pages; \ + } \ + valid; \ + }) + +#define virt_to_page(kaddr) \ + (ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr)) + +#define virt_addr_valid(kaddr) (KVADDR_TO_NID(kaddr) < MAX_NUMNODES) + +/* + * Common discontigmem stuff. + * PHYS_TO_NID is used by the ARM kernel/setup.c + */ +#define PHYS_TO_NID(addr) PFN_TO_NID((addr) >> PAGE_SHIFT) + +/* + * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory + * and returns the mem_map of that node. + */ +#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr)) + +/* + * Given a page frame number, find the owning node of the memory + * and returns the mem_map of that node. + */ +#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn)) + +#ifdef NODE_MEM_SIZE_BITS +#define NODE_MEM_SIZE_MASK ((1 << NODE_MEM_SIZE_BITS) - 1) + +/* + * Given a kernel address, find the home node of the underlying memory. + */ +#define KVADDR_TO_NID(addr) \ + (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS) + +/* + * Given a page frame number, convert it to a node id. + */ +#define PFN_TO_NID(pfn) \ + (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT)) + +/* + * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory + * and returns the index corresponding to the appropriate page in the + * node's mem_map. + */ +#define LOCAL_MAP_NR(addr) \ + (((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT) + +#endif /* NODE_MEM_SIZE_BITS */ + +#endif /* !CONFIG_DISCONTIGMEM */ + +/* + * For BIO. "will die". Kill me when bio_to_phys() and bvec_to_phys() die. + */ +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +/* + * Optional device DMA address remapping. Do _not_ use directly! + * We should really eliminate virt_to_bus() here - it's deprecated. + */ +#ifndef __arch_page_to_dma +#define page_to_dma(dev, page) ((dma_addr_t)__virt_to_bus((unsigned long)page_address(page))) +#define dma_to_virt(dev, addr) ((void *)__bus_to_virt(addr)) +#define virt_to_dma(dev, addr) ((dma_addr_t)__virt_to_bus((unsigned long)(addr))) +#else +#define page_to_dma(dev, page) (__arch_page_to_dma(dev, page)) +#define dma_to_virt(dev, addr) (__arch_dma_to_virt(dev, addr)) +#define virt_to_dma(dev, addr) (__arch_virt_to_dma(dev, addr)) +#endif + +/* + * Optional coherency support. Currently used only by selected + * Intel XSC3-based systems. + */ +#ifndef arch_is_coherent +#define arch_is_coherent() 0 +#endif + +#endif + +#include + +#endif diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h new file mode 100644 index 000000000000..54570d2e95b7 --- /dev/null +++ b/arch/arm/include/asm/mman.h @@ -0,0 +1,17 @@ +#ifndef __ARM_MMAN_H__ +#define __ARM_MMAN_H__ + +#include + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* __ARM_MMAN_H__ */ diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h new file mode 100644 index 000000000000..53099d4ee421 --- /dev/null +++ b/arch/arm/include/asm/mmu.h @@ -0,0 +1,33 @@ +#ifndef __ARM_MMU_H +#define __ARM_MMU_H + +#ifdef CONFIG_MMU + +typedef struct { +#ifdef CONFIG_CPU_HAS_ASID + unsigned int id; +#endif + unsigned int kvm_seq; +} mm_context_t; + +#ifdef CONFIG_CPU_HAS_ASID +#define ASID(mm) ((mm)->context.id & 255) +#else +#define ASID(mm) (0) +#endif + +#else + +/* + * From nommu.h: + * Copyright (C) 2002, David McCullough + * modified for 2.6 by Hyok S. Choi + */ +typedef struct { + struct vm_list_struct *vmlist; + unsigned long end_brk; +} mm_context_t; + +#endif + +#endif diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h new file mode 100644 index 000000000000..a301e446007f --- /dev/null +++ b/arch/arm/include/asm/mmu_context.h @@ -0,0 +1,117 @@ +/* + * arch/arm/include/asm/mmu_context.h + * + * Copyright (C) 1996 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 27-06-1996 RMK Created + */ +#ifndef __ASM_ARM_MMU_CONTEXT_H +#define __ASM_ARM_MMU_CONTEXT_H + +#include +#include +#include +#include + +void __check_kvm_seq(struct mm_struct *mm); + +#ifdef CONFIG_CPU_HAS_ASID + +/* + * On ARMv6, we have the following structure in the Context ID: + * + * 31 7 0 + * +-------------------------+-----------+ + * | process ID | ASID | + * +-------------------------+-----------+ + * | context ID | + * +-------------------------------------+ + * + * The ASID is used to tag entries in the CPU caches and TLBs. + * The context ID is used by debuggers and trace logic, and + * should be unique within all running processes. + */ +#define ASID_BITS 8 +#define ASID_MASK ((~0) << ASID_BITS) +#define ASID_FIRST_VERSION (1 << ASID_BITS) + +extern unsigned int cpu_last_asid; + +void __init_new_context(struct task_struct *tsk, struct mm_struct *mm); +void __new_context(struct mm_struct *mm); + +static inline void check_context(struct mm_struct *mm) +{ + if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) + __new_context(mm); + + if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq)) + __check_kvm_seq(mm); +} + +#define init_new_context(tsk,mm) (__init_new_context(tsk,mm),0) + +#else + +static inline void check_context(struct mm_struct *mm) +{ + if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq)) + __check_kvm_seq(mm); +} + +#define init_new_context(tsk,mm) 0 + +#endif + +#define destroy_context(mm) do { } while(0) + +/* + * This is called when "tsk" is about to enter lazy TLB mode. + * + * mm: describes the currently active mm context + * tsk: task which is entering lazy tlb + * cpu: cpu number which is entering lazy tlb + * + * tsk->mm will be NULL + */ +static inline void +enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +/* + * This is the actual mm switch as far as the scheduler + * is concerned. No registers are touched. We avoid + * calling the CPU specific function when the mm hasn't + * actually changed. + */ +static inline void +switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ +#ifdef CONFIG_MMU + unsigned int cpu = smp_processor_id(); + +#ifdef CONFIG_SMP + /* check for possible thread migration */ + if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask)) + __flush_icache_all(); +#endif + if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) { + check_context(next); + cpu_switch_mm(next->pgd, next); + if (cache_is_vivt()) + cpu_clear(cpu, prev->cpu_vm_mask); + } +#endif +} + +#define deactivate_mm(tsk,mm) do { } while (0) +#define activate_mm(prev,next) switch_mm(prev, next, NULL) + +#endif diff --git a/arch/arm/include/asm/mmzone.h b/arch/arm/include/asm/mmzone.h new file mode 100644 index 000000000000..f2fbb5084901 --- /dev/null +++ b/arch/arm/include/asm/mmzone.h @@ -0,0 +1,30 @@ +/* + * arch/arm/include/asm/mmzone.h + * + * 1999-12-29 Nicolas Pitre Created + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_MMZONE_H +#define __ASM_MMZONE_H + +/* + * Currently defined in arch/arm/mm/discontig.c + */ +extern pg_data_t discontig_node_data[]; + +/* + * Return a pointer to the node data for node n. + */ +#define NODE_DATA(nid) (&discontig_node_data[nid]) + +/* + * NODE_MEM_MAP gives the kaddr for the mem_map of the node. + */ +#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map) + +#include + +#endif diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h new file mode 100644 index 000000000000..24b168dc31a3 --- /dev/null +++ b/arch/arm/include/asm/module.h @@ -0,0 +1,18 @@ +#ifndef _ASM_ARM_MODULE_H +#define _ASM_ARM_MODULE_H + +struct mod_arch_specific +{ + int foo; +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +/* + * Include the ARM architecture version. + */ +#define MODULE_ARCH_VERMAGIC "ARMv" __stringify(__LINUX_ARM_ARCH__) " " + +#endif /* _ASM_ARM_MODULE_H */ diff --git a/arch/arm/include/asm/msgbuf.h b/arch/arm/include/asm/msgbuf.h new file mode 100644 index 000000000000..33b35b946eaa --- /dev/null +++ b/arch/arm/include/asm/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef _ASMARM_MSGBUF_H +#define _ASMARM_MSGBUF_H + +/* + * The msqid64_ds structure for arm architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _ASMARM_MSGBUF_H */ diff --git a/arch/arm/include/asm/mtd-xip.h b/arch/arm/include/asm/mtd-xip.h new file mode 100644 index 000000000000..9eb127cc7db2 --- /dev/null +++ b/arch/arm/include/asm/mtd-xip.h @@ -0,0 +1,26 @@ +/* + * MTD primitives for XIP support. Architecture specific functions + * + * Do not include this file directly. It's included from linux/mtd/xip.h + * + * Author: Nicolas Pitre + * Created: Nov 2, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ + */ + +#ifndef __ARM_MTD_XIP_H__ +#define __ARM_MTD_XIP_H__ + +#include +#include + +/* fill instruction prefetch */ +#define xip_iprefetch() do { asm volatile (".rep 8; nop; .endr"); } while (0) + +#endif /* __ARM_MTD_XIP_H__ */ diff --git a/arch/arm/include/asm/mutex.h b/arch/arm/include/asm/mutex.h new file mode 100644 index 000000000000..93226cf23ae0 --- /dev/null +++ b/arch/arm/include/asm/mutex.h @@ -0,0 +1,127 @@ +/* + * arch/arm/include/asm/mutex.h + * + * ARM optimized mutex locking primitives + * + * Please look into asm-generic/mutex-xchg.h for a formal definition. + */ +#ifndef _ASM_MUTEX_H +#define _ASM_MUTEX_H + +#if __LINUX_ARM_ARCH__ < 6 +/* On pre-ARMv6 hardware the swp based implementation is the most efficient. */ +# include +#else + +/* + * Attempting to lock a mutex on ARMv6+ can be done with a bastardized + * atomic decrement (it is not a reliable atomic decrement but it satisfies + * the defined semantics for our purpose, while being smaller and faster + * than a real atomic decrement or atomic swap. The idea is to attempt + * decrementing the lock value only once. If once decremented it isn't zero, + * or if its store-back fails due to a dispute on the exclusive store, we + * simply bail out immediately through the slow path where the lock will be + * reattempted until it succeeds. + */ +static inline void +__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) +{ + int __ex_flag, __res; + + __asm__ ( + + "ldrex %0, [%2] \n\t" + "sub %0, %0, #1 \n\t" + "strex %1, %0, [%2] " + + : "=&r" (__res), "=&r" (__ex_flag) + : "r" (&(count)->counter) + : "cc","memory" ); + + __res |= __ex_flag; + if (unlikely(__res != 0)) + fail_fn(count); +} + +static inline int +__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) +{ + int __ex_flag, __res; + + __asm__ ( + + "ldrex %0, [%2] \n\t" + "sub %0, %0, #1 \n\t" + "strex %1, %0, [%2] " + + : "=&r" (__res), "=&r" (__ex_flag) + : "r" (&(count)->counter) + : "cc","memory" ); + + __res |= __ex_flag; + if (unlikely(__res != 0)) + __res = fail_fn(count); + return __res; +} + +/* + * Same trick is used for the unlock fast path. However the original value, + * rather than the result, is used to test for success in order to have + * better generated assembly. + */ +static inline void +__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *)) +{ + int __ex_flag, __res, __orig; + + __asm__ ( + + "ldrex %0, [%3] \n\t" + "add %1, %0, #1 \n\t" + "strex %2, %1, [%3] " + + : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) + : "r" (&(count)->counter) + : "cc","memory" ); + + __orig |= __ex_flag; + if (unlikely(__orig != 0)) + fail_fn(count); +} + +/* + * If the unlock was done on a contended lock, or if the unlock simply fails + * then the mutex remains locked. + */ +#define __mutex_slowpath_needs_to_unlock() 1 + +/* + * For __mutex_fastpath_trylock we use another construct which could be + * described as a "single value cmpxchg". + * + * This provides the needed trylock semantics like cmpxchg would, but it is + * lighter and less generic than a true cmpxchg implementation. + */ +static inline int +__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) +{ + int __ex_flag, __res, __orig; + + __asm__ ( + + "1: ldrex %0, [%3] \n\t" + "subs %1, %0, #1 \n\t" + "strexeq %2, %1, [%3] \n\t" + "movlt %0, #0 \n\t" + "cmpeq %2, #0 \n\t" + "bgt 1b " + + : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) + : "r" (&count->counter) + : "cc", "memory" ); + + return __orig; +} + +#endif +#endif diff --git a/arch/arm/include/asm/nwflash.h b/arch/arm/include/asm/nwflash.h new file mode 100644 index 000000000000..04e5a557a884 --- /dev/null +++ b/arch/arm/include/asm/nwflash.h @@ -0,0 +1,9 @@ +#ifndef _FLASH_H +#define _FLASH_H + +#define FLASH_MINOR 160 /* MAJOR is 10 - miscdevice */ +#define CMD_WRITE_DISABLE 0 +#define CMD_WRITE_ENABLE 0x28 +#define CMD_WRITE_BASE64K_ENABLE 0x47 + +#endif /* _FLASH_H */ diff --git a/arch/arm/include/asm/page-nommu.h b/arch/arm/include/asm/page-nommu.h new file mode 100644 index 000000000000..3574c0deb37f --- /dev/null +++ b/arch/arm/include/asm/page-nommu.h @@ -0,0 +1,49 @@ +/* + * arch/arm/include/asm/page-nommu.h + * + * Copyright (C) 2004 Hyok S. Choi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _ASMARM_PAGE_NOMMU_H +#define _ASMARM_PAGE_NOMMU_H + +#if !defined(CONFIG_SMALL_TASKS) && PAGE_SHIFT < 13 +#define KTHREAD_SIZE (8192) +#else +#define KTHREAD_SIZE PAGE_SIZE +#endif + +#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) +#define free_user_page(page, addr) free_page(addr) + +#define clear_page(page) memset((page), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) + +#define clear_user_page(page, vaddr, pg) clear_page(page) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) + +/* + * These are used to make use of C type-checking.. + */ +typedef unsigned long pte_t; +typedef unsigned long pmd_t; +typedef unsigned long pgd_t[2]; +typedef unsigned long pgprot_t; + +#define pte_val(x) (x) +#define pmd_val(x) (x) +#define pgd_val(x) ((x)[0]) +#define pgprot_val(x) (x) + +#define __pte(x) (x) +#define __pmd(x) (x) +#define __pgprot(x) (x) + +extern unsigned long memory_start; +extern unsigned long memory_end; + +#endif diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h new file mode 100644 index 000000000000..cf2e2680daaa --- /dev/null +++ b/arch/arm/include/asm/page.h @@ -0,0 +1,199 @@ +/* + * arch/arm/include/asm/page.h + * + * Copyright (C) 1995-2003 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_PAGE_H +#define _ASMARM_PAGE_H + +/* PAGE_SHIFT determines the page size */ +#define PAGE_SHIFT 12 +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#ifndef __ASSEMBLY__ + +#ifndef CONFIG_MMU + +#include "page-nommu.h" + +#else + +#include + +/* + * User Space Model + * ================ + * + * This section selects the correct set of functions for dealing with + * page-based copying and clearing for user space for the particular + * processor(s) we're building for. + * + * We have the following to choose from: + * v3 - ARMv3 + * v4wt - ARMv4 with writethrough cache, without minicache + * v4wb - ARMv4 with writeback cache, without minicache + * v4_mc - ARMv4 with minicache + * xscale - Xscale + * xsc3 - XScalev3 + */ +#undef _USER +#undef MULTI_USER + +#ifdef CONFIG_CPU_COPY_V3 +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER v3 +# endif +#endif + +#ifdef CONFIG_CPU_COPY_V4WT +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER v4wt +# endif +#endif + +#ifdef CONFIG_CPU_COPY_V4WB +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER v4wb +# endif +#endif + +#ifdef CONFIG_CPU_COPY_FEROCEON +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER feroceon +# endif +#endif + +#ifdef CONFIG_CPU_SA1100 +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER v4_mc +# endif +#endif + +#ifdef CONFIG_CPU_XSCALE +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER xscale_mc +# endif +#endif + +#ifdef CONFIG_CPU_XSC3 +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER xsc3_mc +# endif +#endif + +#ifdef CONFIG_CPU_COPY_V6 +# define MULTI_USER 1 +#endif + +#if !defined(_USER) && !defined(MULTI_USER) +#error Unknown user operations model +#endif + +struct cpu_user_fns { + void (*cpu_clear_user_page)(void *p, unsigned long user); + void (*cpu_copy_user_page)(void *to, const void *from, + unsigned long user); +}; + +#ifdef MULTI_USER +extern struct cpu_user_fns cpu_user; + +#define __cpu_clear_user_page cpu_user.cpu_clear_user_page +#define __cpu_copy_user_page cpu_user.cpu_copy_user_page + +#else + +#define __cpu_clear_user_page __glue(_USER,_clear_user_page) +#define __cpu_copy_user_page __glue(_USER,_copy_user_page) + +extern void __cpu_clear_user_page(void *p, unsigned long user); +extern void __cpu_copy_user_page(void *to, const void *from, + unsigned long user); +#endif + +#define clear_user_page(addr,vaddr,pg) __cpu_clear_user_page(addr, vaddr) +#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr) + +#define clear_page(page) memzero((void *)(page), PAGE_SIZE) +extern void copy_page(void *to, const void *from); + +#undef STRICT_MM_TYPECHECKS + +#ifdef STRICT_MM_TYPECHECKS +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pmd; } pmd_t; +typedef struct { unsigned long pgd[2]; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((x).pmd) +#define pgd_val(x) ((x).pgd[0]) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +#else +/* + * .. while these make it easier on the compiler + */ +typedef unsigned long pte_t; +typedef unsigned long pmd_t; +typedef unsigned long pgd_t[2]; +typedef unsigned long pgprot_t; + +#define pte_val(x) (x) +#define pmd_val(x) (x) +#define pgd_val(x) ((x)[0]) +#define pgprot_val(x) (x) + +#define __pte(x) (x) +#define __pmd(x) (x) +#define __pgprot(x) (x) + +#endif /* STRICT_MM_TYPECHECKS */ + +#endif /* CONFIG_MMU */ + +typedef struct page *pgtable_t; + +#include + +#endif /* !__ASSEMBLY__ */ + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +/* + * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers. + */ +#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) +#define ARCH_SLAB_MINALIGN 8 +#endif + +#include + +#endif diff --git a/arch/arm/include/asm/param.h b/arch/arm/include/asm/param.h new file mode 100644 index 000000000000..8b24bf94c06b --- /dev/null +++ b/arch/arm/include/asm/param.h @@ -0,0 +1,31 @@ +/* + * arch/arm/include/asm/param.h + * + * Copyright (C) 1995-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_PARAM_H +#define __ASM_PARAM_H + +#ifdef __KERNEL__ +# define HZ CONFIG_HZ /* Internal kernel timer frequency */ +# define USER_HZ 100 /* User interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ +#else +# define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +/* max length of hostname */ +#define MAXHOSTNAMELEN 64 + +#endif + diff --git a/arch/arm/include/asm/parport.h b/arch/arm/include/asm/parport.h new file mode 100644 index 000000000000..26e94b09035a --- /dev/null +++ b/arch/arm/include/asm/parport.h @@ -0,0 +1,18 @@ +/* + * arch/arm/include/asm/parport.h: ARM-specific parport initialisation + * + * Copyright (C) 1999, 2000 Tim Waugh + * + * This file should only be included by drivers/parport/parport_pc.c. + */ + +#ifndef __ASMARM_PARPORT_H +#define __ASMARM_PARPORT_H + +static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); +static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) +{ + return parport_pc_find_isa_ports (autoirq, autodma); +} + +#endif /* !(_ASMARM_PARPORT_H) */ diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h new file mode 100644 index 000000000000..2d84792f2e12 --- /dev/null +++ b/arch/arm/include/asm/pci.h @@ -0,0 +1,91 @@ +#ifndef ASMARM_PCI_H +#define ASMARM_PCI_H + +#ifdef __KERNEL__ +#include + +#include /* for PCIBIOS_MIN_* */ + +#define pcibios_scan_all_fns(a, b) 0 + +#ifdef CONFIG_PCI_HOST_ITE8152 +/* ITE bridge requires setting latency timer to avoid early bus access + termination by PIC bus mater devices +*/ +extern void pcibios_set_master(struct pci_dev *dev); +#else +static inline void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} +#endif + +static inline void pcibios_penalize_isa_irq(int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +/* + * The PCI address space does equal the physical memory address space. + * The networking and block device layers use this boolean for bounce + * buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (0) + +/* + * Whether pci_unmap_{single,page} is a nop depends upon the + * configuration. + */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL)) + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif + +#define HAVE_PCI_MMAP +extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); + +extern void +pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res); + +extern void +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region); + +static inline struct resource * +pcibios_select_root(struct pci_dev *pdev, struct resource *res) +{ + struct resource *root = NULL; + + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + if (res->flags & IORESOURCE_MEM) + root = &iomem_resource; + + return root; +} + +/* + * Dummy implementation; always return 0. + */ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return 0; +} + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h new file mode 100644 index 000000000000..b4e32d8ec072 --- /dev/null +++ b/arch/arm/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ARM_PERCPU +#define __ARM_PERCPU + +#include + +#endif diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h new file mode 100644 index 000000000000..3dcd64bf1824 --- /dev/null +++ b/arch/arm/include/asm/pgalloc.h @@ -0,0 +1,136 @@ +/* + * arch/arm/include/asm/pgalloc.h + * + * Copyright (C) 2000-2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_PGALLOC_H +#define _ASMARM_PGALLOC_H + +#include +#include +#include +#include +#include + +#define check_pgt_cache() do { } while (0) + +#ifdef CONFIG_MMU + +#define _PAGE_USER_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER)) +#define _PAGE_KERNEL_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL)) + +/* + * Since we have only two-level page tables, these are trivial + */ +#define pmd_alloc_one(mm,addr) ({ BUG(); ((pmd_t *)2); }) +#define pmd_free(mm, pmd) do { } while (0) +#define pgd_populate(mm,pmd,pte) BUG() + +extern pgd_t *get_pgd_slow(struct mm_struct *mm); +extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd); + +#define pgd_alloc(mm) get_pgd_slow(mm) +#define pgd_free(mm, pgd) free_pgd_slow(mm, pgd) + +/* + * Allocate one PTE table. + * + * This actually allocates two hardware PTE tables, but we wrap this up + * into one table thus: + * + * +------------+ + * | h/w pt 0 | + * +------------+ + * | h/w pt 1 | + * +------------+ + * | Linux pt 0 | + * +------------+ + * | Linux pt 1 | + * +------------+ + */ +static inline pte_t * +pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr) +{ + pte_t *pte; + + pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + if (pte) { + clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE); + pte += PTRS_PER_PTE; + } + + return pte; +} + +static inline pgtable_t +pte_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + struct page *pte; + + pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); + if (pte) { + void *page = page_address(pte); + clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE); + pgtable_page_ctor(pte); + } + + return pte; +} + +/* + * Free one PTE table. + */ +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + if (pte) { + pte -= PTRS_PER_PTE; + free_page((unsigned long)pte); + } +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t pte) +{ + pgtable_page_dtor(pte); + __free_page(pte); +} + +static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval) +{ + pmdp[0] = __pmd(pmdval); + pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); + flush_pmd_entry(pmdp); +} + +/* + * Populate the pmdp entry with a pointer to the pte. This pmd is part + * of the mm address space. + * + * Ensure that we always set both PMD entries. + */ +static inline void +pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep) +{ + unsigned long pte_ptr = (unsigned long)ptep; + + /* + * The pmd must be loaded with the physical + * address of the PTE table + */ + pte_ptr -= PTRS_PER_PTE * sizeof(void *); + __pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE); +} + +static inline void +pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep) +{ + __pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +#endif /* CONFIG_MMU */ + +#endif diff --git a/arch/arm/include/asm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h new file mode 100644 index 000000000000..fd1521d5cb9d --- /dev/null +++ b/arch/arm/include/asm/pgtable-hwdef.h @@ -0,0 +1,90 @@ +/* + * arch/arm/include/asm/pgtable-hwdef.h + * + * Copyright (C) 1995-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_PGTABLE_HWDEF_H +#define _ASMARM_PGTABLE_HWDEF_H + +/* + * Hardware page table definitions. + * + * + Level 1 descriptor (PMD) + * - common + */ +#define PMD_TYPE_MASK (3 << 0) +#define PMD_TYPE_FAULT (0 << 0) +#define PMD_TYPE_TABLE (1 << 0) +#define PMD_TYPE_SECT (2 << 0) +#define PMD_BIT4 (1 << 4) +#define PMD_DOMAIN(x) ((x) << 5) +#define PMD_PROTECTION (1 << 9) /* v5 */ +/* + * - section + */ +#define PMD_SECT_BUFFERABLE (1 << 2) +#define PMD_SECT_CACHEABLE (1 << 3) +#define PMD_SECT_XN (1 << 4) /* v6 */ +#define PMD_SECT_AP_WRITE (1 << 10) +#define PMD_SECT_AP_READ (1 << 11) +#define PMD_SECT_TEX(x) ((x) << 12) /* v5 */ +#define PMD_SECT_APX (1 << 15) /* v6 */ +#define PMD_SECT_S (1 << 16) /* v6 */ +#define PMD_SECT_nG (1 << 17) /* v6 */ +#define PMD_SECT_SUPER (1 << 18) /* v6 */ + +#define PMD_SECT_UNCACHED (0) +#define PMD_SECT_BUFFERED (PMD_SECT_BUFFERABLE) +#define PMD_SECT_WT (PMD_SECT_CACHEABLE) +#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) +#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE) +#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) +#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2)) + +/* + * - coarse table (not used) + */ + +/* + * + Level 2 descriptor (PTE) + * - common + */ +#define PTE_TYPE_MASK (3 << 0) +#define PTE_TYPE_FAULT (0 << 0) +#define PTE_TYPE_LARGE (1 << 0) +#define PTE_TYPE_SMALL (2 << 0) +#define PTE_TYPE_EXT (3 << 0) /* v5 */ +#define PTE_BUFFERABLE (1 << 2) +#define PTE_CACHEABLE (1 << 3) + +/* + * - extended small page/tiny page + */ +#define PTE_EXT_XN (1 << 0) /* v6 */ +#define PTE_EXT_AP_MASK (3 << 4) +#define PTE_EXT_AP0 (1 << 4) +#define PTE_EXT_AP1 (2 << 4) +#define PTE_EXT_AP_UNO_SRO (0 << 4) +#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0) +#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1) +#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0) +#define PTE_EXT_TEX(x) ((x) << 6) /* v5 */ +#define PTE_EXT_APX (1 << 9) /* v6 */ +#define PTE_EXT_COHERENT (1 << 9) /* XScale3 */ +#define PTE_EXT_SHARED (1 << 10) /* v6 */ +#define PTE_EXT_NG (1 << 11) /* v6 */ + +/* + * - small page + */ +#define PTE_SMALL_AP_MASK (0xff << 4) +#define PTE_SMALL_AP_UNO_SRO (0x00 << 4) +#define PTE_SMALL_AP_UNO_SRW (0x55 << 4) +#define PTE_SMALL_AP_URO_SRW (0xaa << 4) +#define PTE_SMALL_AP_URW_SRW (0xff << 4) + +#endif diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h new file mode 100644 index 000000000000..b011f2e939aa --- /dev/null +++ b/arch/arm/include/asm/pgtable-nommu.h @@ -0,0 +1,118 @@ +/* + * arch/arm/include/asm/pgtable-nommu.h + * + * Copyright (C) 1995-2002 Russell King + * Copyright (C) 2004 Hyok S. Choi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_PGTABLE_NOMMU_H +#define _ASMARM_PGTABLE_NOMMU_H + +#ifndef __ASSEMBLY__ + +#include +#include +#include + +/* + * Trivial page table functions. + */ +#define pgd_present(pgd) (1) +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_clear(pgdp) +#define kern_addr_valid(addr) (1) +#define pmd_offset(a, b) ((void *)0) +/* FIXME */ +/* + * PMD_SHIFT determines the size of the area a second-level page table can map + * PGDIR_SHIFT determines what a third-level page table entry can map + */ +#define PGDIR_SHIFT 21 + +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) +/* FIXME */ + +#define PAGE_NONE __pgprot(0) +#define PAGE_SHARED __pgprot(0) +#define PAGE_COPY __pgprot(0) +#define PAGE_READONLY __pgprot(0) +#define PAGE_KERNEL __pgprot(0) + +#define swapper_pg_dir ((pgd_t *) 0) + +#define __swp_type(x) (0) +#define __swp_offset(x) (0) +#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + + +typedef pte_t *pte_addr_t; + +static inline int pte_file(pte_t pte) { return 0; } + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +#define ZERO_PAGE(vaddr) (virt_to_page(0)) + +/* + * Mark the prot value as uncacheable and unbufferable. + */ +#define pgprot_noncached(prot) __pgprot(0) +#define pgprot_writecombine(prot) __pgprot(0) + + +/* + * These would be in other places but having them here reduces the diffs. + */ +extern unsigned int kobjsize(const void *objp); + +/* + * No page table caches to initialise. + */ +#define pgtable_cache_init() do { } while (0) +#define io_remap_page_range remap_page_range +#define io_remap_pfn_range remap_pfn_range + + +/* + * All 32bit addresses are effectively valid for vmalloc... + * Sort of meaningless for non-VM targets. + */ +#define VMALLOC_START 0 +#define VMALLOC_END 0xffffffff + +#define FIRST_USER_ADDRESS (0) + +#include + +#else + +/* + * dummy tlb and user structures. + */ +#define v3_tlb_fns (0) +#define v4_tlb_fns (0) +#define v4wb_tlb_fns (0) +#define v4wbi_tlb_fns (0) +#define v6wbi_tlb_fns (0) +#define v7wbi_tlb_fns (0) + +#define v3_user_fns (0) +#define v4_user_fns (0) +#define v4_mc_user_fns (0) +#define v4wb_user_fns (0) +#define v4wt_user_fns (0) +#define v6_user_fns (0) +#define xscale_mc_user_fns (0) + +#endif /*__ASSEMBLY__*/ + +#endif /* _ASMARM_PGTABLE_H */ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h new file mode 100644 index 000000000000..8ab060a53ab0 --- /dev/null +++ b/arch/arm/include/asm/pgtable.h @@ -0,0 +1,401 @@ +/* + * arch/arm/include/asm/pgtable.h + * + * Copyright (C) 1995-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_PGTABLE_H +#define _ASMARM_PGTABLE_H + +#include +#include + +#ifndef CONFIG_MMU + +#include "pgtable-nommu.h" + +#else + +#include +#include +#include + +/* + * Just any arbitrary offset to the start of the vmalloc VM area: the + * current 8MB value just means that there will be a 8MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + * + * Note that platforms may override VMALLOC_START, but they must provide + * VMALLOC_END. VMALLOC_END defines the (exclusive) limit of this space, + * which may not overlap IO space. + */ +#ifndef VMALLOC_START +#define VMALLOC_OFFSET (8*1024*1024) +#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) +#endif + +/* + * Hardware-wise, we have a two level page table structure, where the first + * level has 4096 entries, and the second level has 256 entries. Each entry + * is one 32-bit word. Most of the bits in the second level entry are used + * by hardware, and there aren't any "accessed" and "dirty" bits. + * + * Linux on the other hand has a three level page table structure, which can + * be wrapped to fit a two level page table structure easily - using the PGD + * and PTE only. However, Linux also expects one "PTE" table per page, and + * at least a "dirty" bit. + * + * Therefore, we tweak the implementation slightly - we tell Linux that we + * have 2048 entries in the first level, each of which is 8 bytes (iow, two + * hardware pointers to the second level.) The second level contains two + * hardware PTE tables arranged contiguously, followed by Linux versions + * which contain the state information Linux needs. We, therefore, end up + * with 512 entries in the "PTE" level. + * + * This leads to the page tables having the following layout: + * + * pgd pte + * | | + * +--------+ +0 + * | |-----> +------------+ +0 + * +- - - - + +4 | h/w pt 0 | + * | |-----> +------------+ +1024 + * +--------+ +8 | h/w pt 1 | + * | | +------------+ +2048 + * +- - - - + | Linux pt 0 | + * | | +------------+ +3072 + * +--------+ | Linux pt 1 | + * | | +------------+ +4096 + * + * See L_PTE_xxx below for definitions of bits in the "Linux pt", and + * PTE_xxx for definitions of bits appearing in the "h/w pt". + * + * PMD_xxx definitions refer to bits in the first level page table. + * + * The "dirty" bit is emulated by only granting hardware write permission + * iff the page is marked "writable" and "dirty" in the Linux PTE. This + * means that a write to a clean page will cause a permission fault, and + * the Linux MM layer will mark the page dirty via handle_pte_fault(). + * For the hardware to notice the permission change, the TLB entry must + * be flushed, and ptep_set_access_flags() does that for us. + * + * The "accessed" or "young" bit is emulated by a similar method; we only + * allow accesses to the page if the "young" bit is set. Accesses to the + * page will cause a fault, and handle_pte_fault() will set the young bit + * for us as long as the page is marked present in the corresponding Linux + * PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is + * up to date. + * + * However, when the "young" bit is cleared, we deny access to the page + * by clearing the hardware PTE. Currently Linux does not flush the TLB + * for us in this case, which means the TLB will retain the transation + * until either the TLB entry is evicted under pressure, or a context + * switch which changes the user space mapping occurs. + */ +#define PTRS_PER_PTE 512 +#define PTRS_PER_PMD 1 +#define PTRS_PER_PGD 2048 + +/* + * PMD_SHIFT determines the size of the area a second-level page table can map + * PGDIR_SHIFT determines what a third-level page table entry can map + */ +#define PMD_SHIFT 21 +#define PGDIR_SHIFT 21 + +#define LIBRARY_TEXT_START 0x0c000000 + +#ifndef __ASSEMBLY__ +extern void __pte_error(const char *file, int line, unsigned long val); +extern void __pmd_error(const char *file, int line, unsigned long val); +extern void __pgd_error(const char *file, int line, unsigned long val); + +#define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte_val(pte)) +#define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd_val(pmd)) +#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd_val(pgd)) +#endif /* !__ASSEMBLY__ */ + +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * This is the lowest virtual address we can permit any user space + * mapping to be mapped at. This is particularly important for + * non-high vector CPUs. + */ +#define FIRST_USER_ADDRESS PAGE_SIZE + +#define FIRST_USER_PGD_NR 1 +#define USER_PTRS_PER_PGD ((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR) + +/* + * section address mask and size definitions. + */ +#define SECTION_SHIFT 20 +#define SECTION_SIZE (1UL << SECTION_SHIFT) +#define SECTION_MASK (~(SECTION_SIZE-1)) + +/* + * ARMv6 supersection address mask and size definitions. + */ +#define SUPERSECTION_SHIFT 24 +#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT) +#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1)) + +/* + * "Linux" PTE definitions. + * + * We keep two sets of PTEs - the hardware and the linux version. + * This allows greater flexibility in the way we map the Linux bits + * onto the hardware tables, and allows us to have YOUNG and DIRTY + * bits. + * + * The PTE table pointer refers to the hardware entries; the "Linux" + * entries are stored 1024 bytes below. + */ +#define L_PTE_PRESENT (1 << 0) +#define L_PTE_FILE (1 << 1) /* only when !PRESENT */ +#define L_PTE_YOUNG (1 << 1) +#define L_PTE_BUFFERABLE (1 << 2) /* matches PTE */ +#define L_PTE_CACHEABLE (1 << 3) /* matches PTE */ +#define L_PTE_USER (1 << 4) +#define L_PTE_WRITE (1 << 5) +#define L_PTE_EXEC (1 << 6) +#define L_PTE_DIRTY (1 << 7) +#define L_PTE_SHARED (1 << 10) /* shared(v6), coherent(xsc3) */ + +#ifndef __ASSEMBLY__ + +/* + * The pgprot_* and protection_map entries will be fixed up in runtime + * to include the cachable and bufferable bits based on memory policy, + * as well as any architecture dependent bits like global/ASID and SMP + * shared mapping bits. + */ +#define _L_PTE_DEFAULT L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE +#define _L_PTE_READ L_PTE_USER | L_PTE_EXEC + +extern pgprot_t pgprot_user; +extern pgprot_t pgprot_kernel; + +#define PAGE_NONE pgprot_user +#define PAGE_COPY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ) +#define PAGE_SHARED __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \ + L_PTE_WRITE) +#define PAGE_READONLY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ) +#define PAGE_KERNEL pgprot_kernel + +#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT) +#define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ) +#define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE) +#define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ) + +#endif /* __ASSEMBLY__ */ + +/* + * The table below defines the page protection levels that we insert into our + * Linux page table version. These get translated into the best that the + * architecture can perform. Note that on most ARM hardware: + * 1) We cannot do execute protection + * 2) If we could do execute protection, then read is implied + * 3) write implies read permissions + */ +#define __P000 __PAGE_NONE +#define __P001 __PAGE_READONLY +#define __P010 __PAGE_COPY +#define __P011 __PAGE_COPY +#define __P100 __PAGE_READONLY +#define __P101 __PAGE_READONLY +#define __P110 __PAGE_COPY +#define __P111 __PAGE_COPY + +#define __S000 __PAGE_NONE +#define __S001 __PAGE_READONLY +#define __S010 __PAGE_SHARED +#define __S011 __PAGE_SHARED +#define __S100 __PAGE_READONLY +#define __S101 __PAGE_READONLY +#define __S110 __PAGE_SHARED +#define __S111 __PAGE_SHARED + +#ifndef __ASSEMBLY__ +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern struct page *empty_zero_page; +#define ZERO_PAGE(vaddr) (empty_zero_page) + +#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) +#define pfn_pte(pfn,prot) (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))) + +#define pte_none(pte) (!pte_val(pte)) +#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) +#define pte_page(pte) (pfn_to_page(pte_pfn(pte))) +#define pte_offset_kernel(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) +#define pte_offset_map(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) +#define pte_offset_map_nested(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) + +#define set_pte_at(mm,addr,ptep,pteval) do { \ + set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \ + } while (0) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) +#define pte_write(pte) (pte_val(pte) & L_PTE_WRITE) +#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) +#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) +#define pte_special(pte) (0) + +/* + * The following only works if pte_present() is not true. + */ +#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) +#define pte_to_pgoff(x) (pte_val(x) >> 2) +#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE) + +#define PTE_FILE_MAX_BITS 30 + +#define PTE_BIT_FUNC(fn,op) \ +static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } + +PTE_BIT_FUNC(wrprotect, &= ~L_PTE_WRITE); +PTE_BIT_FUNC(mkwrite, |= L_PTE_WRITE); +PTE_BIT_FUNC(mkclean, &= ~L_PTE_DIRTY); +PTE_BIT_FUNC(mkdirty, |= L_PTE_DIRTY); +PTE_BIT_FUNC(mkold, &= ~L_PTE_YOUNG); +PTE_BIT_FUNC(mkyoung, |= L_PTE_YOUNG); + +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +/* + * Mark the prot value as uncacheable and unbufferable. + */ +#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) & ~(L_PTE_CACHEABLE | L_PTE_BUFFERABLE)) +#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~L_PTE_CACHEABLE) + +#define pmd_none(pmd) (!pmd_val(pmd)) +#define pmd_present(pmd) (pmd_val(pmd)) +#define pmd_bad(pmd) (pmd_val(pmd) & 2) + +#define copy_pmd(pmdpd,pmdps) \ + do { \ + pmdpd[0] = pmdps[0]; \ + pmdpd[1] = pmdps[1]; \ + flush_pmd_entry(pmdpd); \ + } while (0) + +#define pmd_clear(pmdp) \ + do { \ + pmdp[0] = __pmd(0); \ + pmdp[1] = __pmd(0); \ + clean_pmd_entry(pmdp); \ + } while (0) + +static inline pte_t *pmd_page_vaddr(pmd_t pmd) +{ + unsigned long ptr; + + ptr = pmd_val(pmd) & ~(PTRS_PER_PTE * sizeof(void *) - 1); + ptr += PTRS_PER_PTE * sizeof(void *); + + return __va(ptr); +} + +#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd))) + +/* + * Permanent address of a page. We never have highmem, so this is trivial. + */ +#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +#define mk_pte(page,prot) pfn_pte(page_to_pfn(page),prot) + +/* + * The "pgd_xxx()" functions here are trivial for a folded two-level + * setup: the pgd is never bad, and a pmd always exists (as it's folded + * into the pgd entry) + */ +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_present(pgd) (1) +#define pgd_clear(pgdp) do { } while (0) +#define set_pgd(pgd,pgdp) do { } while (0) + +/* to find an entry in a page-table-directory */ +#define pgd_index(addr) ((addr) >> PGDIR_SHIFT) + +#define pgd_offset(mm, addr) ((mm)->pgd+pgd_index(addr)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(addr) pgd_offset(&init_mm, addr) + +/* Find an entry in the second-level page table.. */ +#define pmd_offset(dir, addr) ((pmd_t *)(dir)) + +/* Find an entry in the third-level page table.. */ +#define __pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + const unsigned long mask = L_PTE_EXEC | L_PTE_WRITE | L_PTE_USER; + pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); + return pte; +} + +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; + +/* Encode and decode a swap entry. + * + * We support up to 32GB of swap on 4k machines + */ +#define __swp_type(x) (((x).val >> 2) & 0x7f) +#define __swp_offset(x) ((x).val >> 9) +#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val }) + +/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ +/* FIXME: this is not correct */ +#define kern_addr_valid(addr) (1) + +#include + +/* + * We provide our own arch_get_unmapped_area to cope with VIPT caches. + */ +#define HAVE_ARCH_UNMAPPED_AREA + +/* + * remap a physical page `pfn' of size `size' with page protection `prot' + * into virtual address `from' + */ +#define io_remap_pfn_range(vma,from,pfn,size,prot) \ + remap_pfn_range(vma, from, pfn, size, prot) + +#define pgtable_cache_init() do { } while (0) + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_MMU */ + +#endif /* _ASMARM_PGTABLE_H */ diff --git a/arch/arm/include/asm/poll.h b/arch/arm/include/asm/poll.h new file mode 100644 index 000000000000..c98509d3149e --- /dev/null +++ b/arch/arm/include/asm/poll.h @@ -0,0 +1 @@ +#include diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/asm/posix_types.h new file mode 100644 index 000000000000..2446d23bfdbf --- /dev/null +++ b/arch/arm/include/asm/posix_types.h @@ -0,0 +1,77 @@ +/* + * arch/arm/include/asm/posix_types.h + * + * Copyright (C) 1996-1998 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 27-06-1996 RMK Created + */ +#ifndef __ARCH_ARM_POSIX_TYPES_H +#define __ARCH_ARM_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#if defined(__KERNEL__) + +#undef __FD_SET +#define __FD_SET(fd, fdsetp) \ + (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] |= (1<<((fd) & 31))) + +#undef __FD_CLR +#define __FD_CLR(fd, fdsetp) \ + (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] &= ~(1<<((fd) & 31))) + +#undef __FD_ISSET +#define __FD_ISSET(fd, fdsetp) \ + ((((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] & (1<<((fd) & 31))) != 0) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) \ + (memset (fdsetp, 0, sizeof (*(fd_set *)(fdsetp)))) + +#endif + +#endif diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h new file mode 100644 index 000000000000..db80203b68e0 --- /dev/null +++ b/arch/arm/include/asm/proc-fns.h @@ -0,0 +1,241 @@ +/* + * arch/arm/include/asm/proc-fns.h + * + * Copyright (C) 1997-1999 Russell King + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_PROCFNS_H +#define __ASM_PROCFNS_H + +#ifdef __KERNEL__ + + +/* + * Work out if we need multiple CPU support + */ +#undef MULTI_CPU +#undef CPU_NAME + +/* + * CPU_NAME - the prefix for CPU related functions + */ + +#ifdef CONFIG_CPU_32 +# ifdef CONFIG_CPU_ARM610 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm6 +# endif +# endif +# ifdef CONFIG_CPU_ARM7TDMI +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm7tdmi +# endif +# endif +# ifdef CONFIG_CPU_ARM710 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm7 +# endif +# endif +# ifdef CONFIG_CPU_ARM720T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm720 +# endif +# endif +# ifdef CONFIG_CPU_ARM740T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm740 +# endif +# endif +# ifdef CONFIG_CPU_ARM9TDMI +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm9tdmi +# endif +# endif +# ifdef CONFIG_CPU_ARM920T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm920 +# endif +# endif +# ifdef CONFIG_CPU_ARM922T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm922 +# endif +# endif +# ifdef CONFIG_CPU_ARM925T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm925 +# endif +# endif +# ifdef CONFIG_CPU_ARM926T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm926 +# endif +# endif +# ifdef CONFIG_CPU_ARM940T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm940 +# endif +# endif +# ifdef CONFIG_CPU_ARM946E +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm946 +# endif +# endif +# ifdef CONFIG_CPU_SA110 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_sa110 +# endif +# endif +# ifdef CONFIG_CPU_SA1100 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_sa1100 +# endif +# endif +# ifdef CONFIG_CPU_ARM1020 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1020 +# endif +# endif +# ifdef CONFIG_CPU_ARM1020E +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1020e +# endif +# endif +# ifdef CONFIG_CPU_ARM1022 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1022 +# endif +# endif +# ifdef CONFIG_CPU_ARM1026 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1026 +# endif +# endif +# ifdef CONFIG_CPU_XSCALE +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_xscale +# endif +# endif +# ifdef CONFIG_CPU_XSC3 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_xsc3 +# endif +# endif +# ifdef CONFIG_CPU_FEROCEON +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_feroceon +# endif +# endif +# ifdef CONFIG_CPU_V6 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_v6 +# endif +# endif +# ifdef CONFIG_CPU_V7 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_v7 +# endif +# endif +#endif + +#ifndef __ASSEMBLY__ + +#ifndef MULTI_CPU +#include +#else +#include +#endif + +#include + +#ifdef CONFIG_MMU + +#define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm) + +#define cpu_get_pgd() \ + ({ \ + unsigned long pg; \ + __asm__("mrc p15, 0, %0, c2, c0, 0" \ + : "=r" (pg) : : "cc"); \ + pg &= ~0x3fff; \ + (pgd_t *)phys_to_virt(pg); \ + }) + +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* __ASM_PROCFNS_H */ diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h new file mode 100644 index 000000000000..b01d5e7e3d5a --- /dev/null +++ b/arch/arm/include/asm/processor.h @@ -0,0 +1,131 @@ +/* + * arch/arm/include/asm/processor.h + * + * Copyright (C) 1995-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_PROCESSOR_H +#define __ASM_ARM_PROCESSOR_H + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#ifdef __KERNEL__ + +#include +#include + +#ifdef __KERNEL__ +#define STACK_TOP ((current->personality == PER_LINUX_32BIT) ? \ + TASK_SIZE : TASK_SIZE_26) +#define STACK_TOP_MAX TASK_SIZE +#endif + +union debug_insn { + u32 arm; + u16 thumb; +}; + +struct debug_entry { + u32 address; + union debug_insn insn; +}; + +struct debug_info { + int nsaved; + struct debug_entry bp[2]; +}; + +struct thread_struct { + /* fault info */ + unsigned long address; + unsigned long trap_no; + unsigned long error_code; + /* debugging */ + struct debug_info debug; +}; + +#define INIT_THREAD { } + +#ifdef CONFIG_MMU +#define nommu_start_thread(regs) do { } while (0) +#else +#define nommu_start_thread(regs) regs->ARM_r10 = current->mm->start_data +#endif + +#define start_thread(regs,pc,sp) \ +({ \ + unsigned long *stack = (unsigned long *)sp; \ + set_fs(USER_DS); \ + memzero(regs->uregs, sizeof(regs->uregs)); \ + if (current->personality & ADDR_LIMIT_32BIT) \ + regs->ARM_cpsr = USR_MODE; \ + else \ + regs->ARM_cpsr = USR26_MODE; \ + if (elf_hwcap & HWCAP_THUMB && pc & 1) \ + regs->ARM_cpsr |= PSR_T_BIT; \ + regs->ARM_pc = pc & ~1; /* pc */ \ + regs->ARM_sp = sp; /* sp */ \ + regs->ARM_r2 = stack[2]; /* r2 (envp) */ \ + regs->ARM_r1 = stack[1]; /* r1 (argv) */ \ + regs->ARM_r0 = stack[0]; /* r0 (argc) */ \ + nommu_start_thread(regs); \ +}) + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +unsigned long get_wchan(struct task_struct *p); + +#define cpu_relax() barrier() + +/* + * Create a new kernel thread + */ +extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); + +#define task_pt_regs(p) \ + ((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1) + +#define KSTK_EIP(tsk) task_pt_regs(tsk)->ARM_pc +#define KSTK_ESP(tsk) task_pt_regs(tsk)->ARM_sp + +/* + * Prefetching support - only ARMv5. + */ +#if __LINUX_ARM_ARCH__ >= 5 + +#define ARCH_HAS_PREFETCH +static inline void prefetch(const void *ptr) +{ + __asm__ __volatile__( + "pld\t%0" + : + : "o" (*(char *)ptr) + : "cc"); +} + +#define ARCH_HAS_PREFETCHW +#define prefetchw(ptr) prefetch(ptr) + +#define ARCH_HAS_SPINLOCK_PREFETCH +#define spin_lock_prefetch(x) do { } while (0) + +#endif + +#endif + +#endif /* __ASM_ARM_PROCESSOR_H */ diff --git a/arch/arm/include/asm/procinfo.h b/arch/arm/include/asm/procinfo.h new file mode 100644 index 000000000000..ca52e584ef74 --- /dev/null +++ b/arch/arm/include/asm/procinfo.h @@ -0,0 +1,49 @@ +/* + * arch/arm/include/asm/procinfo.h + * + * Copyright (C) 1996-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_PROCINFO_H +#define __ASM_PROCINFO_H + +#ifdef __KERNEL__ + +struct cpu_tlb_fns; +struct cpu_user_fns; +struct cpu_cache_fns; +struct processor; + +/* + * Note! struct processor is always defined if we're + * using MULTI_CPU, otherwise this entry is unused, + * but still exists. + * + * NOTE! The following structure is defined by assembly + * language, NOT C code. For more information, check: + * arch/arm/mm/proc-*.S and arch/arm/kernel/head.S + */ +struct proc_info_list { + unsigned int cpu_val; + unsigned int cpu_mask; + unsigned long __cpu_mm_mmu_flags; /* used by head.S */ + unsigned long __cpu_io_mmu_flags; /* used by head.S */ + unsigned long __cpu_flush; /* used by head.S */ + const char *arch_name; + const char *elf_name; + unsigned int elf_hwcap; + const char *cpu_name; + struct processor *proc; + struct cpu_tlb_fns *tlb; + struct cpu_user_fns *user; + struct cpu_cache_fns *cache; +}; + +#else /* __KERNEL__ */ +#include +#warning "Please include asm/elf.h instead" +#endif /* __KERNEL__ */ +#endif diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h new file mode 100644 index 000000000000..b415c0e85458 --- /dev/null +++ b/arch/arm/include/asm/ptrace.h @@ -0,0 +1,162 @@ +/* + * arch/arm/include/asm/ptrace.h + * + * Copyright (C) 1996-2003 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_PTRACE_H +#define __ASM_ARM_PTRACE_H + +#include + +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +/* PTRACE_ATTACH is 16 */ +/* PTRACE_DETACH is 17 */ +#define PTRACE_GETWMMXREGS 18 +#define PTRACE_SETWMMXREGS 19 +/* 20 is unused */ +#define PTRACE_OLDSETOPTIONS 21 +#define PTRACE_GET_THREAD_AREA 22 +#define PTRACE_SET_SYSCALL 23 +/* PTRACE_SYSCALL is 24 */ +#define PTRACE_GETCRUNCHREGS 25 +#define PTRACE_SETCRUNCHREGS 26 + +/* + * PSR bits + */ +#define USR26_MODE 0x00000000 +#define FIQ26_MODE 0x00000001 +#define IRQ26_MODE 0x00000002 +#define SVC26_MODE 0x00000003 +#define USR_MODE 0x00000010 +#define FIQ_MODE 0x00000011 +#define IRQ_MODE 0x00000012 +#define SVC_MODE 0x00000013 +#define ABT_MODE 0x00000017 +#define UND_MODE 0x0000001b +#define SYSTEM_MODE 0x0000001f +#define MODE32_BIT 0x00000010 +#define MODE_MASK 0x0000001f +#define PSR_T_BIT 0x00000020 +#define PSR_F_BIT 0x00000040 +#define PSR_I_BIT 0x00000080 +#define PSR_A_BIT 0x00000100 +#define PSR_J_BIT 0x01000000 +#define PSR_Q_BIT 0x08000000 +#define PSR_V_BIT 0x10000000 +#define PSR_C_BIT 0x20000000 +#define PSR_Z_BIT 0x40000000 +#define PSR_N_BIT 0x80000000 +#define PCMASK 0 + +/* + * Groups of PSR bits + */ +#define PSR_f 0xff000000 /* Flags */ +#define PSR_s 0x00ff0000 /* Status */ +#define PSR_x 0x0000ff00 /* Extension */ +#define PSR_c 0x000000ff /* Control */ + +#ifndef __ASSEMBLY__ + +/* + * This struct defines the way the registers are stored on the + * stack during a system call. Note that sizeof(struct pt_regs) + * has to be a multiple of 8. + */ +struct pt_regs { + long uregs[18]; +}; + +#define ARM_cpsr uregs[16] +#define ARM_pc uregs[15] +#define ARM_lr uregs[14] +#define ARM_sp uregs[13] +#define ARM_ip uregs[12] +#define ARM_fp uregs[11] +#define ARM_r10 uregs[10] +#define ARM_r9 uregs[9] +#define ARM_r8 uregs[8] +#define ARM_r7 uregs[7] +#define ARM_r6 uregs[6] +#define ARM_r5 uregs[5] +#define ARM_r4 uregs[4] +#define ARM_r3 uregs[3] +#define ARM_r2 uregs[2] +#define ARM_r1 uregs[1] +#define ARM_r0 uregs[0] +#define ARM_ORIG_r0 uregs[17] + +#ifdef __KERNEL__ + +#define user_mode(regs) \ + (((regs)->ARM_cpsr & 0xf) == 0) + +#ifdef CONFIG_ARM_THUMB +#define thumb_mode(regs) \ + (((regs)->ARM_cpsr & PSR_T_BIT)) +#else +#define thumb_mode(regs) (0) +#endif + +#define isa_mode(regs) \ + ((((regs)->ARM_cpsr & PSR_J_BIT) >> 23) | \ + (((regs)->ARM_cpsr & PSR_T_BIT) >> 5)) + +#define processor_mode(regs) \ + ((regs)->ARM_cpsr & MODE_MASK) + +#define interrupts_enabled(regs) \ + (!((regs)->ARM_cpsr & PSR_I_BIT)) + +#define fast_interrupts_enabled(regs) \ + (!((regs)->ARM_cpsr & PSR_F_BIT)) + +/* Are the current registers suitable for user mode? + * (used to maintain security in signal handlers) + */ +static inline int valid_user_regs(struct pt_regs *regs) +{ + if (user_mode(regs) && (regs->ARM_cpsr & PSR_I_BIT) == 0) { + regs->ARM_cpsr &= ~(PSR_F_BIT | PSR_A_BIT); + return 1; + } + + /* + * Force CPSR to something logical... + */ + regs->ARM_cpsr &= PSR_f | PSR_s | (PSR_x & ~PSR_A_BIT) | PSR_T_BIT | MODE32_BIT; + if (!(elf_hwcap & HWCAP_26BIT)) + regs->ARM_cpsr |= USR_MODE; + + return 0; +} + +#define pc_pointer(v) \ + ((v) & ~PCMASK) + +#define instruction_pointer(regs) \ + (pc_pointer((regs)->ARM_pc)) + +#ifdef CONFIG_SMP +extern unsigned long profile_pc(struct pt_regs *regs); +#else +#define profile_pc(regs) instruction_pointer(regs) +#endif + +#define predicate(x) ((x) & 0xf0000000) +#define PREDICATE_ALWAYS 0xe0000000 + +#endif /* __KERNEL__ */ + +#endif /* __ASSEMBLY__ */ + +#endif + diff --git a/arch/arm/include/asm/resource.h b/arch/arm/include/asm/resource.h new file mode 100644 index 000000000000..734b581b5b6a --- /dev/null +++ b/arch/arm/include/asm/resource.h @@ -0,0 +1,6 @@ +#ifndef _ARM_RESOURCE_H +#define _ARM_RESOURCE_H + +#include + +#endif diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h new file mode 100644 index 000000000000..ca0a37d03400 --- /dev/null +++ b/arch/arm/include/asm/scatterlist.h @@ -0,0 +1,27 @@ +#ifndef _ASMARM_SCATTERLIST_H +#define _ASMARM_SCATTERLIST_H + +#include +#include + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; /* buffer offset */ + dma_addr_t dma_address; /* dma address */ + unsigned int length; /* length */ +}; + +/* + * These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#endif /* _ASMARM_SCATTERLIST_H */ diff --git a/arch/arm/include/asm/sections.h b/arch/arm/include/asm/sections.h new file mode 100644 index 000000000000..2b8c5160388f --- /dev/null +++ b/arch/arm/include/asm/sections.h @@ -0,0 +1 @@ +#include diff --git a/arch/arm/include/asm/segment.h b/arch/arm/include/asm/segment.h new file mode 100644 index 000000000000..9e24c21f6304 --- /dev/null +++ b/arch/arm/include/asm/segment.h @@ -0,0 +1,11 @@ +#ifndef __ASM_ARM_SEGMENT_H +#define __ASM_ARM_SEGMENT_H + +#define __KERNEL_CS 0x0 +#define __KERNEL_DS 0x0 + +#define __USER_CS 0x1 +#define __USER_DS 0x1 + +#endif /* __ASM_ARM_SEGMENT_H */ + diff --git a/arch/arm/include/asm/sembuf.h b/arch/arm/include/asm/sembuf.h new file mode 100644 index 000000000000..1c0283954289 --- /dev/null +++ b/arch/arm/include/asm/sembuf.h @@ -0,0 +1,25 @@ +#ifndef _ASMARM_SEMBUF_H +#define _ASMARM_SEMBUF_H + +/* + * The semid64_ds structure for arm architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASMARM_SEMBUF_H */ diff --git a/arch/arm/include/asm/serial.h b/arch/arm/include/asm/serial.h new file mode 100644 index 000000000000..ebb049091e26 --- /dev/null +++ b/arch/arm/include/asm/serial.h @@ -0,0 +1,19 @@ +/* + * arch/arm/include/asm/serial.h + * + * Copyright (C) 1996 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 15-10-1996 RMK Created + */ + +#ifndef __ASM_SERIAL_H +#define __ASM_SERIAL_H + +#define BASE_BAUD (1843200 / 16) + +#endif diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h new file mode 100644 index 000000000000..7bbf105463f1 --- /dev/null +++ b/arch/arm/include/asm/setup.h @@ -0,0 +1,226 @@ +/* + * linux/include/asm/setup.h + * + * Copyright (C) 1997-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Structure passed to kernel to tell it about the + * hardware it's running on. See Documentation/arm/Setup + * for more info. + */ +#ifndef __ASMARM_SETUP_H +#define __ASMARM_SETUP_H + +#include + +#define COMMAND_LINE_SIZE 1024 + +/* The list ends with an ATAG_NONE node. */ +#define ATAG_NONE 0x00000000 + +struct tag_header { + __u32 size; + __u32 tag; +}; + +/* The list must start with an ATAG_CORE node */ +#define ATAG_CORE 0x54410001 + +struct tag_core { + __u32 flags; /* bit 0 = read-only */ + __u32 pagesize; + __u32 rootdev; +}; + +/* it is allowed to have multiple ATAG_MEM nodes */ +#define ATAG_MEM 0x54410002 + +struct tag_mem32 { + __u32 size; + __u32 start; /* physical start address */ +}; + +/* VGA text type displays */ +#define ATAG_VIDEOTEXT 0x54410003 + +struct tag_videotext { + __u8 x; + __u8 y; + __u16 video_page; + __u8 video_mode; + __u8 video_cols; + __u16 video_ega_bx; + __u8 video_lines; + __u8 video_isvga; + __u16 video_points; +}; + +/* describes how the ramdisk will be used in kernel */ +#define ATAG_RAMDISK 0x54410004 + +struct tag_ramdisk { + __u32 flags; /* bit 0 = load, bit 1 = prompt */ + __u32 size; /* decompressed ramdisk size in _kilo_ bytes */ + __u32 start; /* starting block of floppy-based RAM disk image */ +}; + +/* describes where the compressed ramdisk image lives (virtual address) */ +/* + * this one accidentally used virtual addresses - as such, + * it's deprecated. + */ +#define ATAG_INITRD 0x54410005 + +/* describes where the compressed ramdisk image lives (physical address) */ +#define ATAG_INITRD2 0x54420005 + +struct tag_initrd { + __u32 start; /* physical start address */ + __u32 size; /* size of compressed ramdisk image in bytes */ +}; + +/* board serial number. "64 bits should be enough for everybody" */ +#define ATAG_SERIAL 0x54410006 + +struct tag_serialnr { + __u32 low; + __u32 high; +}; + +/* board revision */ +#define ATAG_REVISION 0x54410007 + +struct tag_revision { + __u32 rev; +}; + +/* initial values for vesafb-type framebuffers. see struct screen_info + * in include/linux/tty.h + */ +#define ATAG_VIDEOLFB 0x54410008 + +struct tag_videolfb { + __u16 lfb_width; + __u16 lfb_height; + __u16 lfb_depth; + __u16 lfb_linelength; + __u32 lfb_base; + __u32 lfb_size; + __u8 red_size; + __u8 red_pos; + __u8 green_size; + __u8 green_pos; + __u8 blue_size; + __u8 blue_pos; + __u8 rsvd_size; + __u8 rsvd_pos; +}; + +/* command line: \0 terminated string */ +#define ATAG_CMDLINE 0x54410009 + +struct tag_cmdline { + char cmdline[1]; /* this is the minimum size */ +}; + +/* acorn RiscPC specific information */ +#define ATAG_ACORN 0x41000101 + +struct tag_acorn { + __u32 memc_control_reg; + __u32 vram_pages; + __u8 sounddefault; + __u8 adfsdrives; +}; + +/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */ +#define ATAG_MEMCLK 0x41000402 + +struct tag_memclk { + __u32 fmemclk; +}; + +struct tag { + struct tag_header hdr; + union { + struct tag_core core; + struct tag_mem32 mem; + struct tag_videotext videotext; + struct tag_ramdisk ramdisk; + struct tag_initrd initrd; + struct tag_serialnr serialnr; + struct tag_revision revision; + struct tag_videolfb videolfb; + struct tag_cmdline cmdline; + + /* + * Acorn specific + */ + struct tag_acorn acorn; + + /* + * DC21285 specific + */ + struct tag_memclk memclk; + } u; +}; + +struct tagtable { + __u32 tag; + int (*parse)(const struct tag *); +}; + +#define tag_member_present(tag,member) \ + ((unsigned long)(&((struct tag *)0L)->member + 1) \ + <= (tag)->hdr.size * 4) + +#define tag_next(t) ((struct tag *)((__u32 *)(t) + (t)->hdr.size)) +#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2) + +#define for_each_tag(t,base) \ + for (t = base; t->hdr.size; t = tag_next(t)) + +#ifdef __KERNEL__ + +#define __tag __used __attribute__((__section__(".taglist.init"))) +#define __tagtable(tag, fn) \ +static struct tagtable __tagtable_##fn __tag = { tag, fn } + +/* + * Memory map description + */ +#ifdef CONFIG_ARCH_LH7A40X +# define NR_BANKS 16 +#else +# define NR_BANKS 8 +#endif + +struct membank { + unsigned long start; + unsigned long size; + int node; +}; + +struct meminfo { + int nr_banks; + struct membank bank[NR_BANKS]; +}; + +/* + * Early command line parameters. + */ +struct early_params { + const char *arg; + void (*fn)(char **p); +}; + +#define __early_param(name,fn) \ +static struct early_params __early_##fn __used \ +__attribute__((__section__(".early_param.init"))) = { name, fn } + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/arm/include/asm/shmbuf.h b/arch/arm/include/asm/shmbuf.h new file mode 100644 index 000000000000..2e5c67ba1c97 --- /dev/null +++ b/arch/arm/include/asm/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef _ASMARM_SHMBUF_H +#define _ASMARM_SHMBUF_H + +/* + * The shmid64_ds structure for arm architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASMARM_SHMBUF_H */ diff --git a/arch/arm/include/asm/shmparam.h b/arch/arm/include/asm/shmparam.h new file mode 100644 index 000000000000..a5223b3a9bf9 --- /dev/null +++ b/arch/arm/include/asm/shmparam.h @@ -0,0 +1,16 @@ +#ifndef _ASMARM_SHMPARAM_H +#define _ASMARM_SHMPARAM_H + +/* + * This should be the size of the virtually indexed cache/ways, + * or page size, whichever is greater since the cache aliases + * every size/ways bytes. + */ +#define SHMLBA (4 * PAGE_SIZE) /* attach addr a multiple of this */ + +/* + * Enforce SHMLBA in shmat + */ +#define __ARCH_FORCE_SHMLBA + +#endif /* _ASMARM_SHMPARAM_H */ diff --git a/arch/arm/include/asm/sigcontext.h b/arch/arm/include/asm/sigcontext.h new file mode 100644 index 000000000000..fc0b80b6a6fc --- /dev/null +++ b/arch/arm/include/asm/sigcontext.h @@ -0,0 +1,34 @@ +#ifndef _ASMARM_SIGCONTEXT_H +#define _ASMARM_SIGCONTEXT_H + +/* + * Signal context structure - contains all info to do with the state + * before the signal handler was invoked. Note: only add new entries + * to the end of the structure. + */ +struct sigcontext { + unsigned long trap_no; + unsigned long error_code; + unsigned long oldmask; + unsigned long arm_r0; + unsigned long arm_r1; + unsigned long arm_r2; + unsigned long arm_r3; + unsigned long arm_r4; + unsigned long arm_r5; + unsigned long arm_r6; + unsigned long arm_r7; + unsigned long arm_r8; + unsigned long arm_r9; + unsigned long arm_r10; + unsigned long arm_fp; + unsigned long arm_ip; + unsigned long arm_sp; + unsigned long arm_lr; + unsigned long arm_pc; + unsigned long arm_cpsr; + unsigned long fault_address; +}; + + +#endif diff --git a/arch/arm/include/asm/siginfo.h b/arch/arm/include/asm/siginfo.h new file mode 100644 index 000000000000..5e21852e6039 --- /dev/null +++ b/arch/arm/include/asm/siginfo.h @@ -0,0 +1,6 @@ +#ifndef _ASMARM_SIGINFO_H +#define _ASMARM_SIGINFO_H + +#include + +#endif diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h new file mode 100644 index 000000000000..d0fb487aba4f --- /dev/null +++ b/arch/arm/include/asm/signal.h @@ -0,0 +1,164 @@ +#ifndef _ASMARM_SIGNAL_H +#define _ASMARM_SIGNAL_H + +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +#define SIGSWI 32 + +/* + * SA_FLAGS values: + * + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_SIGINFO deliver the signal with SIGINFO structs + * SA_THIRTYTWO delivers the signal in 32-bit mode, even if the task + * is running in 26-bit. + * SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)). + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NODEFER prevents the current signal from being masked in the handler. + * SA_RESETHAND clears the handler when the signal is delivered. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_THIRTYTWO 0x02000000 +#define SA_RESTORER 0x04000000 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + __sigrestore_t sa_restorer; +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + __sigrestore_t sa_restorer; + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +#include +#define ptrace_signal_deliver(regs, cookie) do { } while (0) +#endif + +#endif diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h new file mode 100644 index 000000000000..503843db1565 --- /dev/null +++ b/arch/arm/include/asm/sizes.h @@ -0,0 +1,56 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* DO NOT EDIT!! - this file automatically generated + * from .s file by awk -f s2h.awk + */ +/* Size definitions + * Copyright (C) ARM Limited 1998. All rights reserved. + */ + +#ifndef __sizes_h +#define __sizes_h 1 + +/* handy sizes */ +#define SZ_16 0x00000010 +#define SZ_256 0x00000100 +#define SZ_512 0x00000200 + +#define SZ_1K 0x00000400 +#define SZ_4K 0x00001000 +#define SZ_8K 0x00002000 +#define SZ_16K 0x00004000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 +#define SZ_512K 0x00080000 + +#define SZ_1M 0x00100000 +#define SZ_2M 0x00200000 +#define SZ_4M 0x00400000 +#define SZ_8M 0x00800000 +#define SZ_16M 0x01000000 +#define SZ_32M 0x02000000 +#define SZ_64M 0x04000000 +#define SZ_128M 0x08000000 +#define SZ_256M 0x10000000 +#define SZ_512M 0x20000000 + +#define SZ_1G 0x40000000 +#define SZ_2G 0x80000000 + +#endif + +/* END */ diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h new file mode 100644 index 000000000000..cc12a525a06a --- /dev/null +++ b/arch/arm/include/asm/smp.h @@ -0,0 +1,147 @@ +/* + * arch/arm/include/asm/smp.h + * + * Copyright (C) 2004-2005 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_SMP_H +#define __ASM_ARM_SMP_H + +#include +#include +#include + +#include + +#ifndef CONFIG_SMP +# error " included in non-SMP build" +#endif + +#define raw_smp_processor_id() (current_thread_info()->cpu) + +/* + * at the moment, there's not a big penalty for changing CPUs + * (the >big< penalty is running SMP in the first place) + */ +#define PROC_CHANGE_PENALTY 15 + +struct seq_file; + +/* + * generate IPI list text + */ +extern void show_ipi_list(struct seq_file *p); + +/* + * Called from assembly code, this handles an IPI. + */ +asmlinkage void do_IPI(struct pt_regs *regs); + +/* + * Setup the SMP cpu_possible_map + */ +extern void smp_init_cpus(void); + +/* + * Move global data into per-processor storage. + */ +extern void smp_store_cpu_info(unsigned int cpuid); + +/* + * Raise an IPI cross call on CPUs in callmap. + */ +extern void smp_cross_call(cpumask_t callmap); + +/* + * Broadcast a timer interrupt to the other CPUs. + */ +extern void smp_send_timer(void); + +/* + * Broadcast a clock event to other CPUs. + */ +extern void smp_timer_broadcast(cpumask_t mask); + +/* + * Boot a secondary CPU, and assign it the specified idle task. + * This also gives us the initial stack to use for this CPU. + */ +extern int boot_secondary(unsigned int cpu, struct task_struct *); + +/* + * Called from platform specific assembly code, this is the + * secondary CPU entry point. + */ +asmlinkage void secondary_start_kernel(void); + +/* + * Perform platform specific initialisation of the specified CPU. + */ +extern void platform_secondary_init(unsigned int cpu); + +/* + * Initial data for bringing up a secondary CPU. + */ +struct secondary_data { + unsigned long pgdir; + void *stack; +}; +extern struct secondary_data secondary_data; + +extern int __cpu_disable(void); +extern int mach_cpu_disable(unsigned int cpu); + +extern void __cpu_die(unsigned int cpu); +extern void cpu_die(void); + +extern void platform_cpu_die(unsigned int cpu); +extern int platform_cpu_kill(unsigned int cpu); +extern void platform_cpu_enable(unsigned int cpu); + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi(cpumask_t mask); + +/* + * Local timer interrupt handling function (can be IPI'ed). + */ +extern void local_timer_interrupt(void); + +#ifdef CONFIG_LOCAL_TIMERS + +/* + * Stop a local timer interrupt. + */ +extern void local_timer_stop(unsigned int cpu); + +/* + * Platform provides this to acknowledge a local timer IRQ + */ +extern int local_timer_ack(void); + +#else + +static inline void local_timer_stop(unsigned int cpu) +{ +} + +#endif + +/* + * Setup a local timer interrupt for a CPU. + */ +extern void local_timer_setup(unsigned int cpu); + +/* + * show local interrupt info + */ +extern void show_local_irqs(struct seq_file *); + +/* + * Called from assembly, this is the local timer IRQ handler + */ +asmlinkage void do_local_timer(struct pt_regs *); + +#endif /* ifndef __ASM_ARM_SMP_H */ diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h new file mode 100644 index 000000000000..6817be9573a6 --- /dev/null +++ b/arch/arm/include/asm/socket.h @@ -0,0 +1,57 @@ +#ifndef _ASMARM_SOCKET_H +#define _ASMARM_SOCKET_H + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#endif /* _ASM_SOCKET_H */ diff --git a/arch/arm/include/asm/sockios.h b/arch/arm/include/asm/sockios.h new file mode 100644 index 000000000000..a2588a2512df --- /dev/null +++ b/arch/arm/include/asm/sockios.h @@ -0,0 +1,13 @@ +#ifndef __ARCH_ARM_SOCKIOS_H +#define __ARCH_ARM_SOCKIOS_H + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif diff --git a/arch/arm/include/asm/sparsemem.h b/arch/arm/include/asm/sparsemem.h new file mode 100644 index 000000000000..277158191a0d --- /dev/null +++ b/arch/arm/include/asm/sparsemem.h @@ -0,0 +1,10 @@ +#ifndef ASMARM_SPARSEMEM_H +#define ASMARM_SPARSEMEM_H + +#include + +#define MAX_PHYSADDR_BITS 32 +#define MAX_PHYSMEM_BITS 32 +#define SECTION_SIZE_BITS NODE_MEM_SIZE_BITS + +#endif diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h new file mode 100644 index 000000000000..2b41ebbfa7ff --- /dev/null +++ b/arch/arm/include/asm/spinlock.h @@ -0,0 +1,224 @@ +#ifndef __ASM_SPINLOCK_H +#define __ASM_SPINLOCK_H + +#if __LINUX_ARM_ARCH__ < 6 +#error SMP not supported on pre-ARMv6 CPUs +#endif + +/* + * ARMv6 Spin-locking. + * + * We exclusively read the old value. If it is zero, we may have + * won the lock, so we try exclusively storing it. A memory barrier + * is required after we get a lock, and before we release it, because + * V6 CPUs are assumed to have weakly ordered memory. + * + * Unlocked value: 0 + * Locked value: 1 + */ + +#define __raw_spin_is_locked(x) ((x)->lock != 0) +#define __raw_spin_unlock_wait(lock) \ + do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) + +#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) + +static inline void __raw_spin_lock(raw_spinlock_t *lock) +{ + unsigned long tmp; + + __asm__ __volatile__( +"1: ldrex %0, [%1]\n" +" teq %0, #0\n" +#ifdef CONFIG_CPU_32v6K +" wfene\n" +#endif +" strexeq %0, %2, [%1]\n" +" teqeq %0, #0\n" +" bne 1b" + : "=&r" (tmp) + : "r" (&lock->lock), "r" (1) + : "cc"); + + smp_mb(); +} + +static inline int __raw_spin_trylock(raw_spinlock_t *lock) +{ + unsigned long tmp; + + __asm__ __volatile__( +" ldrex %0, [%1]\n" +" teq %0, #0\n" +" strexeq %0, %2, [%1]" + : "=&r" (tmp) + : "r" (&lock->lock), "r" (1) + : "cc"); + + if (tmp == 0) { + smp_mb(); + return 1; + } else { + return 0; + } +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lock) +{ + smp_mb(); + + __asm__ __volatile__( +" str %1, [%0]\n" +#ifdef CONFIG_CPU_32v6K +" mcr p15, 0, %1, c7, c10, 4\n" /* DSB */ +" sev" +#endif + : + : "r" (&lock->lock), "r" (0) + : "cc"); +} + +/* + * RWLOCKS + * + * + * Write locks are easy - we just set bit 31. When unlocking, we can + * just write zero since the lock is exclusively held. + */ + +static inline void __raw_write_lock(raw_rwlock_t *rw) +{ + unsigned long tmp; + + __asm__ __volatile__( +"1: ldrex %0, [%1]\n" +" teq %0, #0\n" +#ifdef CONFIG_CPU_32v6K +" wfene\n" +#endif +" strexeq %0, %2, [%1]\n" +" teq %0, #0\n" +" bne 1b" + : "=&r" (tmp) + : "r" (&rw->lock), "r" (0x80000000) + : "cc"); + + smp_mb(); +} + +static inline int __raw_write_trylock(raw_rwlock_t *rw) +{ + unsigned long tmp; + + __asm__ __volatile__( +"1: ldrex %0, [%1]\n" +" teq %0, #0\n" +" strexeq %0, %2, [%1]" + : "=&r" (tmp) + : "r" (&rw->lock), "r" (0x80000000) + : "cc"); + + if (tmp == 0) { + smp_mb(); + return 1; + } else { + return 0; + } +} + +static inline void __raw_write_unlock(raw_rwlock_t *rw) +{ + smp_mb(); + + __asm__ __volatile__( + "str %1, [%0]\n" +#ifdef CONFIG_CPU_32v6K +" mcr p15, 0, %1, c7, c10, 4\n" /* DSB */ +" sev\n" +#endif + : + : "r" (&rw->lock), "r" (0) + : "cc"); +} + +/* write_can_lock - would write_trylock() succeed? */ +#define __raw_write_can_lock(x) ((x)->lock == 0) + +/* + * Read locks are a bit more hairy: + * - Exclusively load the lock value. + * - Increment it. + * - Store new lock value if positive, and we still own this location. + * If the value is negative, we've already failed. + * - If we failed to store the value, we want a negative result. + * - If we failed, try again. + * Unlocking is similarly hairy. We may have multiple read locks + * currently active. However, we know we won't have any write + * locks. + */ +static inline void __raw_read_lock(raw_rwlock_t *rw) +{ + unsigned long tmp, tmp2; + + __asm__ __volatile__( +"1: ldrex %0, [%2]\n" +" adds %0, %0, #1\n" +" strexpl %1, %0, [%2]\n" +#ifdef CONFIG_CPU_32v6K +" wfemi\n" +#endif +" rsbpls %0, %1, #0\n" +" bmi 1b" + : "=&r" (tmp), "=&r" (tmp2) + : "r" (&rw->lock) + : "cc"); + + smp_mb(); +} + +static inline void __raw_read_unlock(raw_rwlock_t *rw) +{ + unsigned long tmp, tmp2; + + smp_mb(); + + __asm__ __volatile__( +"1: ldrex %0, [%2]\n" +" sub %0, %0, #1\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" +#ifdef CONFIG_CPU_32v6K +"\n cmp %0, #0\n" +" mcreq p15, 0, %0, c7, c10, 4\n" +" seveq" +#endif + : "=&r" (tmp), "=&r" (tmp2) + : "r" (&rw->lock) + : "cc"); +} + +static inline int __raw_read_trylock(raw_rwlock_t *rw) +{ + unsigned long tmp, tmp2 = 1; + + __asm__ __volatile__( +"1: ldrex %0, [%2]\n" +" adds %0, %0, #1\n" +" strexpl %1, %0, [%2]\n" + : "=&r" (tmp), "+r" (tmp2) + : "r" (&rw->lock) + : "cc"); + + smp_mb(); + return tmp2 == 0; +} + +/* read_can_lock - would read_trylock() succeed? */ +#define __raw_read_can_lock(x) ((x)->lock < 0x80000000) + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* __ASM_SPINLOCK_H */ diff --git a/arch/arm/include/asm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h new file mode 100644 index 000000000000..43e83f6d2ee5 --- /dev/null +++ b/arch/arm/include/asm/spinlock_types.h @@ -0,0 +1,20 @@ +#ifndef __ASM_SPINLOCK_TYPES_H +#define __ASM_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct { + volatile unsigned int lock; +} raw_spinlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 0 } + +typedef struct { + volatile unsigned int lock; +} raw_rwlock_t; + +#define __RAW_RW_LOCK_UNLOCKED { 0 } + +#endif diff --git a/arch/arm/include/asm/stat.h b/arch/arm/include/asm/stat.h new file mode 100644 index 000000000000..42c0c13999d5 --- /dev/null +++ b/arch/arm/include/asm/stat.h @@ -0,0 +1,87 @@ +#ifndef _ASMARM_STAT_H +#define _ASMARM_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +#define STAT_HAVE_NSEC + +struct stat { +#if defined(__ARMEB__) + unsigned short st_dev; + unsigned short __pad1; +#else + unsigned long st_dev; +#endif + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; +#if defined(__ARMEB__) + unsigned short st_rdev; + unsigned short __pad2; +#else + unsigned long st_rdev; +#endif + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + * Note: The kernel zero's the padded region because glibc might read them + * in the hope that the kernel has stretched to using larger sizes. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad0[4]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[4]; + + long long st_size; + unsigned long st_blksize; + unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#endif diff --git a/arch/arm/include/asm/statfs.h b/arch/arm/include/asm/statfs.h new file mode 100644 index 000000000000..a02e6a8c3d70 --- /dev/null +++ b/arch/arm/include/asm/statfs.h @@ -0,0 +1,42 @@ +#ifndef _ASMARM_STATFS_H +#define _ASMARM_STATFS_H + +#ifndef __KERNEL_STRICT_NAMES +# include +typedef __kernel_fsid_t fsid_t; +#endif + +struct statfs { + __u32 f_type; + __u32 f_bsize; + __u32 f_blocks; + __u32 f_bfree; + __u32 f_bavail; + __u32 f_files; + __u32 f_ffree; + __kernel_fsid_t f_fsid; + __u32 f_namelen; + __u32 f_frsize; + __u32 f_spare[5]; +}; + +/* + * With EABI there is 4 bytes of padding added to this structure. + * Let's pack it so the padding goes away to simplify dual ABI support. + * Note that user space does NOT have to pack this structure. + */ +struct statfs64 { + __u32 f_type; + __u32 f_bsize; + __u64 f_blocks; + __u64 f_bfree; + __u64 f_bavail; + __u64 f_files; + __u64 f_ffree; + __kernel_fsid_t f_fsid; + __u32 f_namelen; + __u32 f_frsize; + __u32 f_spare[5]; +} __attribute__ ((packed,aligned(4))); + +#endif diff --git a/arch/arm/include/asm/string.h b/arch/arm/include/asm/string.h new file mode 100644 index 000000000000..e50c4a39b699 --- /dev/null +++ b/arch/arm/include/asm/string.h @@ -0,0 +1,50 @@ +#ifndef __ASM_ARM_STRING_H +#define __ASM_ARM_STRING_H + +/* + * We don't do inline string functions, since the + * optimised inline asm versions are not small. + */ + +#define __HAVE_ARCH_STRRCHR +extern char * strrchr(const char * s, int c); + +#define __HAVE_ARCH_STRCHR +extern char * strchr(const char * s, int c); + +#define __HAVE_ARCH_MEMCPY +extern void * memcpy(void *, const void *, __kernel_size_t); + +#define __HAVE_ARCH_MEMMOVE +extern void * memmove(void *, const void *, __kernel_size_t); + +#define __HAVE_ARCH_MEMCHR +extern void * memchr(const void *, int, __kernel_size_t); + +#define __HAVE_ARCH_MEMZERO +#define __HAVE_ARCH_MEMSET +extern void * memset(void *, int, __kernel_size_t); + +extern void __memzero(void *ptr, __kernel_size_t n); + +#define memset(p,v,n) \ + ({ \ + void *__p = (p); size_t __n = n; \ + if ((__n) != 0) { \ + if (__builtin_constant_p((v)) && (v) == 0) \ + __memzero((__p),(__n)); \ + else \ + memset((__p),(v),(__n)); \ + } \ + (__p); \ + }) + +#define memzero(p,n) \ + ({ \ + void *__p = (p); size_t __n = n; \ + if ((__n) != 0) \ + __memzero((__p),(__n)); \ + (__p); \ + }) + +#endif diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h new file mode 100644 index 000000000000..cf0d0bdee74d --- /dev/null +++ b/arch/arm/include/asm/suspend.h @@ -0,0 +1,4 @@ +#ifndef _ASMARM_SUSPEND_H +#define _ASMARM_SUSPEND_H + +#endif diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h new file mode 100644 index 000000000000..514af792a598 --- /dev/null +++ b/arch/arm/include/asm/system.h @@ -0,0 +1,388 @@ +#ifndef __ASM_ARM_SYSTEM_H +#define __ASM_ARM_SYSTEM_H + +#ifdef __KERNEL__ + +#include + +#define CPU_ARCH_UNKNOWN 0 +#define CPU_ARCH_ARMv3 1 +#define CPU_ARCH_ARMv4 2 +#define CPU_ARCH_ARMv4T 3 +#define CPU_ARCH_ARMv5 4 +#define CPU_ARCH_ARMv5T 5 +#define CPU_ARCH_ARMv5TE 6 +#define CPU_ARCH_ARMv5TEJ 7 +#define CPU_ARCH_ARMv6 8 +#define CPU_ARCH_ARMv7 9 + +/* + * CR1 bits (CP#15 CR1) + */ +#define CR_M (1 << 0) /* MMU enable */ +#define CR_A (1 << 1) /* Alignment abort enable */ +#define CR_C (1 << 2) /* Dcache enable */ +#define CR_W (1 << 3) /* Write buffer enable */ +#define CR_P (1 << 4) /* 32-bit exception handler */ +#define CR_D (1 << 5) /* 32-bit data address range */ +#define CR_L (1 << 6) /* Implementation defined */ +#define CR_B (1 << 7) /* Big endian */ +#define CR_S (1 << 8) /* System MMU protection */ +#define CR_R (1 << 9) /* ROM MMU protection */ +#define CR_F (1 << 10) /* Implementation defined */ +#define CR_Z (1 << 11) /* Implementation defined */ +#define CR_I (1 << 12) /* Icache enable */ +#define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */ +#define CR_RR (1 << 14) /* Round Robin cache replacement */ +#define CR_L4 (1 << 15) /* LDR pc can set T bit */ +#define CR_DT (1 << 16) +#define CR_IT (1 << 18) +#define CR_ST (1 << 19) +#define CR_FI (1 << 21) /* Fast interrupt (lower latency mode) */ +#define CR_U (1 << 22) /* Unaligned access operation */ +#define CR_XP (1 << 23) /* Extended page tables */ +#define CR_VE (1 << 24) /* Vectored interrupts */ + +#define CPUID_ID 0 +#define CPUID_CACHETYPE 1 +#define CPUID_TCM 2 +#define CPUID_TLBTYPE 3 + +/* + * This is used to ensure the compiler did actually allocate the register we + * asked it for some inline assembly sequences. Apparently we can't trust + * the compiler from one version to another so a bit of paranoia won't hurt. + * This string is meant to be concatenated with the inline asm string and + * will cause compilation to stop on mismatch. + * (for details, see gcc PR 15089) + */ +#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t" + +#ifndef __ASSEMBLY__ + +#include +#include +#include + +#ifdef CONFIG_CPU_CP15 +#define read_cpuid(reg) \ + ({ \ + unsigned int __val; \ + asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \ + : "=r" (__val) \ + : \ + : "cc"); \ + __val; \ + }) +#else +extern unsigned int processor_id; +#define read_cpuid(reg) (processor_id) +#endif + +/* + * The CPU ID never changes at run time, so we might as well tell the + * compiler that it's constant. Use this function to read the CPU ID + * rather than directly reading processor_id or read_cpuid() directly. + */ +static inline unsigned int read_cpuid_id(void) __attribute_const__; + +static inline unsigned int read_cpuid_id(void) +{ + return read_cpuid(CPUID_ID); +} + +#define __exception __attribute__((section(".exception.text"))) + +struct thread_info; +struct task_struct; + +/* information about the system we're running on */ +extern unsigned int system_rev; +extern unsigned int system_serial_low; +extern unsigned int system_serial_high; +extern unsigned int mem_fclk_21285; + +struct pt_regs; + +void die(const char *msg, struct pt_regs *regs, int err) + __attribute__((noreturn)); + +struct siginfo; +void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, + unsigned long err, unsigned long trap); + +void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, + struct pt_regs *), + int sig, const char *name); + +#define xchg(ptr,x) \ + ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + +extern asmlinkage void __backtrace(void); +extern asmlinkage void c_backtrace(unsigned long fp, int pmode); + +struct mm_struct; +extern void show_pte(struct mm_struct *mm, unsigned long addr); +extern void __show_regs(struct pt_regs *); + +extern int cpu_architecture(void); +extern void cpu_init(void); + +void arm_machine_restart(char mode); +extern void (*arm_pm_restart)(char str); + +/* + * Intel's XScale3 core supports some v6 features (supersections, L2) + * but advertises itself as v5 as it does not support the v6 ISA. For + * this reason, we need a way to explicitly test for this type of CPU. + */ +#ifndef CONFIG_CPU_XSC3 +#define cpu_is_xsc3() 0 +#else +static inline int cpu_is_xsc3(void) +{ + extern unsigned int processor_id; + + if ((processor_id & 0xffffe000) == 0x69056000) + return 1; + + return 0; +} +#endif + +#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3) +#define cpu_is_xscale() 0 +#else +#define cpu_is_xscale() 1 +#endif + +#define UDBG_UNDEFINED (1 << 0) +#define UDBG_SYSCALL (1 << 1) +#define UDBG_BADABORT (1 << 2) +#define UDBG_SEGV (1 << 3) +#define UDBG_BUS (1 << 4) + +extern unsigned int user_debug; + +#if __LINUX_ARM_ARCH__ >= 4 +#define vectors_high() (cr_alignment & CR_V) +#else +#define vectors_high() (0) +#endif + +#if __LINUX_ARM_ARCH__ >= 7 +#define isb() __asm__ __volatile__ ("isb" : : : "memory") +#define dsb() __asm__ __volatile__ ("dsb" : : : "memory") +#define dmb() __asm__ __volatile__ ("dmb" : : : "memory") +#elif defined(CONFIG_CPU_XSC3) || __LINUX_ARM_ARCH__ == 6 +#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ + : : "r" (0) : "memory") +#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ + : : "r" (0) : "memory") +#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \ + : : "r" (0) : "memory") +#else +#define isb() __asm__ __volatile__ ("" : : : "memory") +#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ + : : "r" (0) : "memory") +#define dmb() __asm__ __volatile__ ("" : : : "memory") +#endif + +#ifndef CONFIG_SMP +#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) +#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) +#define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#else +#define mb() dmb() +#define rmb() dmb() +#define wmb() dmb() +#define smp_mb() dmb() +#define smp_rmb() dmb() +#define smp_wmb() dmb() +#endif +#define read_barrier_depends() do { } while(0) +#define smp_read_barrier_depends() do { } while(0) + +#define set_mb(var, value) do { var = value; smp_mb(); } while (0) +#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); + +extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ +extern unsigned long cr_alignment; /* defined in entry-armv.S */ + +static inline unsigned int get_cr(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc"); + return val; +} + +static inline void set_cr(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" + : : "r" (val) : "cc"); + isb(); +} + +#ifndef CONFIG_SMP +extern void adjust_cr(unsigned long mask, unsigned long set); +#endif + +#define CPACC_FULL(n) (3 << (n * 2)) +#define CPACC_SVC(n) (1 << (n * 2)) +#define CPACC_DISABLE(n) (0 << (n * 2)) + +static inline unsigned int get_copro_access(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access" + : "=r" (val) : : "cc"); + return val; +} + +static inline void set_copro_access(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access" + : : "r" (val) : "cc"); + isb(); +} + +/* + * switch_mm() may do a full cache flush over the context switch, + * so enable interrupts over the context switch to avoid high + * latency. + */ +#define __ARCH_WANT_INTERRUPTS_ON_CTXSW + +/* + * switch_to(prev, next) should switch from task `prev' to `next' + * `prev' will never be the same as `next'. schedule() itself + * contains the memory barrier to tell GCC not to cache `current'. + */ +extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *); + +#define switch_to(prev,next,last) \ +do { \ + last = __switch_to(prev,task_thread_info(prev), task_thread_info(next)); \ +} while (0) + +#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) +/* + * On the StrongARM, "swp" is terminally broken since it bypasses the + * cache totally. This means that the cache becomes inconsistent, and, + * since we use normal loads/stores as well, this is really bad. + * Typically, this causes oopsen in filp_close, but could have other, + * more disasterous effects. There are two work-arounds: + * 1. Disable interrupts and emulate the atomic swap + * 2. Clean the cache, perform atomic swap, flush the cache + * + * We choose (1) since its the "easiest" to achieve here and is not + * dependent on the processor type. + * + * NOTE that this solution won't work on an SMP system, so explcitly + * forbid it here. + */ +#define swp_is_buggy +#endif + +static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) +{ + extern void __bad_xchg(volatile void *, int); + unsigned long ret; +#ifdef swp_is_buggy + unsigned long flags; +#endif +#if __LINUX_ARM_ARCH__ >= 6 + unsigned int tmp; +#endif + + switch (size) { +#if __LINUX_ARM_ARCH__ >= 6 + case 1: + asm volatile("@ __xchg1\n" + "1: ldrexb %0, [%3]\n" + " strexb %1, %2, [%3]\n" + " teq %1, #0\n" + " bne 1b" + : "=&r" (ret), "=&r" (tmp) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; + case 4: + asm volatile("@ __xchg4\n" + "1: ldrex %0, [%3]\n" + " strex %1, %2, [%3]\n" + " teq %1, #0\n" + " bne 1b" + : "=&r" (ret), "=&r" (tmp) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; +#elif defined(swp_is_buggy) +#ifdef CONFIG_SMP +#error SMP is not supported on this platform +#endif + case 1: + raw_local_irq_save(flags); + ret = *(volatile unsigned char *)ptr; + *(volatile unsigned char *)ptr = x; + raw_local_irq_restore(flags); + break; + + case 4: + raw_local_irq_save(flags); + ret = *(volatile unsigned long *)ptr; + *(volatile unsigned long *)ptr = x; + raw_local_irq_restore(flags); + break; +#else + case 1: + asm volatile("@ __xchg1\n" + " swpb %0, %1, [%2]" + : "=&r" (ret) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; + case 4: + asm volatile("@ __xchg4\n" + " swp %0, %1, [%2]" + : "=&r" (ret) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; +#endif + default: + __bad_xchg(ptr, size), ret = 0; + break; + } + + return ret; +} + +extern void disable_hlt(void); +extern void enable_hlt(void); + +#include + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#ifndef CONFIG_SMP +#include +#endif + +#endif /* __ASSEMBLY__ */ + +#define arch_align_stack(x) (x) + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/arm/include/asm/termbits.h b/arch/arm/include/asm/termbits.h new file mode 100644 index 000000000000..f784d11f40b5 --- /dev/null +++ b/arch/arm/include/asm/termbits.h @@ -0,0 +1,197 @@ +#ifndef __ASM_ARM_TERMBITS_H +#define __ASM_ARM_TERMBITS_H + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* __ASM_ARM_TERMBITS_H */ diff --git a/arch/arm/include/asm/termios.h b/arch/arm/include/asm/termios.h new file mode 100644 index 000000000000..293e3f1bc3f2 --- /dev/null +++ b/arch/arm/include/asm/termios.h @@ -0,0 +1,92 @@ +#ifndef __ASM_ARM_TERMIOS_H +#define __ASM_ARM_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +#ifdef __KERNEL__ +/* intr=^C quit=^| erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" +#endif + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +#ifdef __KERNEL__ + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp,&(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* __ASM_ARM_TERMIOS_H */ diff --git a/arch/arm/include/asm/therm.h b/arch/arm/include/asm/therm.h new file mode 100644 index 000000000000..f002f0197d78 --- /dev/null +++ b/arch/arm/include/asm/therm.h @@ -0,0 +1,28 @@ +/* + * arch/arm/include/asm/therm.h: Definitions for Dallas Semiconductor + * DS1620 thermometer driver (as used in the Rebel.com NetWinder) + */ +#ifndef __ASM_THERM_H +#define __ASM_THERM_H + +/* ioctl numbers for /dev/therm */ +#define CMD_SET_THERMOSTATE 0x53 +#define CMD_GET_THERMOSTATE 0x54 +#define CMD_GET_STATUS 0x56 +#define CMD_GET_TEMPERATURE 0x57 +#define CMD_SET_THERMOSTATE2 0x58 +#define CMD_GET_THERMOSTATE2 0x59 +#define CMD_GET_TEMPERATURE2 0x5a +#define CMD_GET_FAN 0x5b +#define CMD_SET_FAN 0x5c + +#define FAN_OFF 0 +#define FAN_ON 1 +#define FAN_ALWAYS_ON 2 + +struct therm { + int hi; + int lo; +}; + +#endif diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h new file mode 100644 index 000000000000..e56fa48e4ae7 --- /dev/null +++ b/arch/arm/include/asm/thread_info.h @@ -0,0 +1,153 @@ +/* + * arch/arm/include/asm/thread_info.h + * + * Copyright (C) 2002 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_THREAD_INFO_H +#define __ASM_ARM_THREAD_INFO_H + +#ifdef __KERNEL__ + +#include +#include + +#define THREAD_SIZE_ORDER 1 +#define THREAD_SIZE 8192 +#define THREAD_START_SP (THREAD_SIZE - 8) + +#ifndef __ASSEMBLY__ + +struct task_struct; +struct exec_domain; + +#include +#include + +typedef unsigned long mm_segment_t; + +struct cpu_context_save { + __u32 r4; + __u32 r5; + __u32 r6; + __u32 r7; + __u32 r8; + __u32 r9; + __u32 sl; + __u32 fp; + __u32 sp; + __u32 pc; + __u32 extra[2]; /* Xscale 'acc' register, etc */ +}; + +/* + * low level task data that entry.S needs immediate access to. + * __switch_to() assumes cpu_context follows immediately after cpu_domain. + */ +struct thread_info { + unsigned long flags; /* low level flags */ + int preempt_count; /* 0 => preemptable, <0 => bug */ + mm_segment_t addr_limit; /* address limit */ + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + __u32 cpu; /* cpu */ + __u32 cpu_domain; /* cpu domain */ + struct cpu_context_save cpu_context; /* cpu context */ + __u32 syscall; /* syscall number */ + __u8 used_cp[16]; /* thread used copro */ + unsigned long tp_value; + struct crunch_state crunchstate; + union fp_state fpstate __attribute__((aligned(8))); + union vfp_state vfpstate; +#ifdef CONFIG_ARM_THUMBEE + unsigned long thumbee_state; /* ThumbEE Handler Base register */ +#endif + struct restart_block restart_block; +}; + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .cpu_domain = domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ + domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ + domain_val(DOMAIN_IO, DOMAIN_CLIENT), \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* + * how to get the thread information struct from C + */ +static inline struct thread_info *current_thread_info(void) __attribute_const__; + +static inline struct thread_info *current_thread_info(void) +{ + register unsigned long sp asm ("sp"); + return (struct thread_info *)(sp & ~(THREAD_SIZE - 1)); +} + +#define thread_saved_pc(tsk) \ + ((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc))) +#define thread_saved_fp(tsk) \ + ((unsigned long)(task_thread_info(tsk)->cpu_context.fp)) + +extern void crunch_task_disable(struct thread_info *); +extern void crunch_task_copy(struct thread_info *, void *); +extern void crunch_task_restore(struct thread_info *, void *); +extern void crunch_task_release(struct thread_info *); + +extern void iwmmxt_task_disable(struct thread_info *); +extern void iwmmxt_task_copy(struct thread_info *, void *); +extern void iwmmxt_task_restore(struct thread_info *, void *); +extern void iwmmxt_task_release(struct thread_info *); +extern void iwmmxt_task_switch(struct thread_info *); + +#endif + +/* + * We use bit 30 of the preempt_count to indicate that kernel + * preemption is occurring. See . + */ +#define PREEMPT_ACTIVE 0x40000000 + +/* + * thread information flags: + * TIF_SYSCALL_TRACE - syscall trace active + * TIF_SIGPENDING - signal pending + * TIF_NEED_RESCHED - rescheduling necessary + * TIF_USEDFPU - FPU was used by this task this quantum (SMP) + * TIF_POLLING_NRFLAG - true if poll_idle() is polling TIF_NEED_RESCHED + */ +#define TIF_SIGPENDING 0 +#define TIF_NEED_RESCHED 1 +#define TIF_SYSCALL_TRACE 8 +#define TIF_POLLING_NRFLAG 16 +#define TIF_USING_IWMMXT 17 +#define TIF_MEMDIE 18 +#define TIF_FREEZE 19 + +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) +#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) +#define _TIF_FREEZE (1 << TIF_FREEZE) + +/* + * Change these and you break ASM code in entry-common.S + */ +#define _TIF_WORK_MASK 0x000000ff + +#endif /* __KERNEL__ */ +#endif /* __ASM_ARM_THREAD_INFO_H */ diff --git a/arch/arm/include/asm/thread_notify.h b/arch/arm/include/asm/thread_notify.h new file mode 100644 index 000000000000..f27379d7f72a --- /dev/null +++ b/arch/arm/include/asm/thread_notify.h @@ -0,0 +1,48 @@ +/* + * arch/arm/include/asm/thread_notify.h + * + * Copyright (C) 2006 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_THREAD_NOTIFY_H +#define ASMARM_THREAD_NOTIFY_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +#include +#include + +static inline int thread_register_notifier(struct notifier_block *n) +{ + extern struct atomic_notifier_head thread_notify_head; + return atomic_notifier_chain_register(&thread_notify_head, n); +} + +static inline void thread_unregister_notifier(struct notifier_block *n) +{ + extern struct atomic_notifier_head thread_notify_head; + atomic_notifier_chain_unregister(&thread_notify_head, n); +} + +static inline void thread_notify(unsigned long rc, struct thread_info *thread) +{ + extern struct atomic_notifier_head thread_notify_head; + atomic_notifier_call_chain(&thread_notify_head, rc, thread); +} + +#endif + +/* + * These are the reason codes for the thread notifier. + */ +#define THREAD_NOTIFY_FLUSH 0 +#define THREAD_NOTIFY_RELEASE 1 +#define THREAD_NOTIFY_SWITCH 2 + +#endif +#endif diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h new file mode 100644 index 000000000000..e50e2926cd6e --- /dev/null +++ b/arch/arm/include/asm/timex.h @@ -0,0 +1,24 @@ +/* + * arch/arm/include/asm/timex.h + * + * Copyright (C) 1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Architecture Specific TIME specifications + */ +#ifndef _ASMARM_TIMEX_H +#define _ASMARM_TIMEX_H + +#include + +typedef unsigned long cycles_t; + +static inline cycles_t get_cycles (void) +{ + return 0; +} + +#endif diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h new file mode 100644 index 000000000000..857f1dfac794 --- /dev/null +++ b/arch/arm/include/asm/tlb.h @@ -0,0 +1,94 @@ +/* + * arch/arm/include/asm/tlb.h + * + * Copyright (C) 2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Experimentation shows that on a StrongARM, it appears to be faster + * to use the "invalidate whole tlb" rather than "invalidate single + * tlb" for this. + * + * This appears true for both the process fork+exit case, as well as + * the munmap-large-area case. + */ +#ifndef __ASMARM_TLB_H +#define __ASMARM_TLB_H + +#include +#include + +#ifndef CONFIG_MMU + +#include +#include + +#else /* !CONFIG_MMU */ + +#include + +/* + * TLB handling. This allows us to remove pages from the page + * tables, and efficiently handle the TLB issues. + */ +struct mmu_gather { + struct mm_struct *mm; + unsigned int fullmm; +}; + +DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); + +static inline struct mmu_gather * +tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) +{ + struct mmu_gather *tlb = &get_cpu_var(mmu_gathers); + + tlb->mm = mm; + tlb->fullmm = full_mm_flush; + + return tlb; +} + +static inline void +tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) +{ + if (tlb->fullmm) + flush_tlb_mm(tlb->mm); + + /* keep the page table cache within bounds */ + check_pgt_cache(); + + put_cpu_var(mmu_gathers); +} + +#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0) + +/* + * In the case of tlb vma handling, we can optimise these away in the + * case where we're doing a full MM flush. When we're doing a munmap, + * the vmas are adjusted to only cover the region to be torn down. + */ +static inline void +tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) +{ + if (!tlb->fullmm) + flush_cache_range(vma, vma->vm_start, vma->vm_end); +} + +static inline void +tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) +{ + if (!tlb->fullmm) + flush_tlb_range(vma, vma->vm_start, vma->vm_end); +} + +#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) +#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep) +#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp) + +#define tlb_migrate_finish(mm) do { } while (0) + +#endif /* CONFIG_MMU */ +#endif diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h new file mode 100644 index 000000000000..0d0d40f1b599 --- /dev/null +++ b/arch/arm/include/asm/tlbflush.h @@ -0,0 +1,500 @@ +/* + * arch/arm/include/asm/tlbflush.h + * + * Copyright (C) 1999-2003 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_TLBFLUSH_H +#define _ASMARM_TLBFLUSH_H + + +#ifndef CONFIG_MMU + +#define tlb_flush(tlb) ((void) tlb) + +#else /* CONFIG_MMU */ + +#include + +#define TLB_V3_PAGE (1 << 0) +#define TLB_V4_U_PAGE (1 << 1) +#define TLB_V4_D_PAGE (1 << 2) +#define TLB_V4_I_PAGE (1 << 3) +#define TLB_V6_U_PAGE (1 << 4) +#define TLB_V6_D_PAGE (1 << 5) +#define TLB_V6_I_PAGE (1 << 6) + +#define TLB_V3_FULL (1 << 8) +#define TLB_V4_U_FULL (1 << 9) +#define TLB_V4_D_FULL (1 << 10) +#define TLB_V4_I_FULL (1 << 11) +#define TLB_V6_U_FULL (1 << 12) +#define TLB_V6_D_FULL (1 << 13) +#define TLB_V6_I_FULL (1 << 14) + +#define TLB_V6_U_ASID (1 << 16) +#define TLB_V6_D_ASID (1 << 17) +#define TLB_V6_I_ASID (1 << 18) + +#define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */ +#define TLB_DCLEAN (1 << 30) +#define TLB_WB (1 << 31) + +/* + * MMU TLB Model + * ============= + * + * We have the following to choose from: + * v3 - ARMv3 + * v4 - ARMv4 without write buffer + * v4wb - ARMv4 with write buffer without I TLB flush entry instruction + * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction + * fr - Feroceon (v4wbi with non-outer-cacheable page table walks) + * v6wbi - ARMv6 with write buffer with I TLB flush entry instruction + */ +#undef _TLB +#undef MULTI_TLB + +#define v3_tlb_flags (TLB_V3_FULL | TLB_V3_PAGE) + +#ifdef CONFIG_CPU_TLB_V3 +# define v3_possible_flags v3_tlb_flags +# define v3_always_flags v3_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v3 +# endif +#else +# define v3_possible_flags 0 +# define v3_always_flags (-1UL) +#endif + +#define v4_tlb_flags (TLB_V4_U_FULL | TLB_V4_U_PAGE) + +#ifdef CONFIG_CPU_TLB_V4WT +# define v4_possible_flags v4_tlb_flags +# define v4_always_flags v4_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v4 +# endif +#else +# define v4_possible_flags 0 +# define v4_always_flags (-1UL) +#endif + +#define v4wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \ + TLB_V4_I_FULL | TLB_V4_D_FULL | \ + TLB_V4_I_PAGE | TLB_V4_D_PAGE) + +#ifdef CONFIG_CPU_TLB_V4WBI +# define v4wbi_possible_flags v4wbi_tlb_flags +# define v4wbi_always_flags v4wbi_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v4wbi +# endif +#else +# define v4wbi_possible_flags 0 +# define v4wbi_always_flags (-1UL) +#endif + +#define fr_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_L2CLEAN_FR | \ + TLB_V4_I_FULL | TLB_V4_D_FULL | \ + TLB_V4_I_PAGE | TLB_V4_D_PAGE) + +#ifdef CONFIG_CPU_TLB_FEROCEON +# define fr_possible_flags fr_tlb_flags +# define fr_always_flags fr_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v4wbi +# endif +#else +# define fr_possible_flags 0 +# define fr_always_flags (-1UL) +#endif + +#define v4wb_tlb_flags (TLB_WB | TLB_DCLEAN | \ + TLB_V4_I_FULL | TLB_V4_D_FULL | \ + TLB_V4_D_PAGE) + +#ifdef CONFIG_CPU_TLB_V4WB +# define v4wb_possible_flags v4wb_tlb_flags +# define v4wb_always_flags v4wb_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v4wb +# endif +#else +# define v4wb_possible_flags 0 +# define v4wb_always_flags (-1UL) +#endif + +#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \ + TLB_V6_I_FULL | TLB_V6_D_FULL | \ + TLB_V6_I_PAGE | TLB_V6_D_PAGE | \ + TLB_V6_I_ASID | TLB_V6_D_ASID) + +#ifdef CONFIG_CPU_TLB_V6 +# define v6wbi_possible_flags v6wbi_tlb_flags +# define v6wbi_always_flags v6wbi_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v6wbi +# endif +#else +# define v6wbi_possible_flags 0 +# define v6wbi_always_flags (-1UL) +#endif + +#ifdef CONFIG_CPU_TLB_V7 +# define v7wbi_possible_flags v6wbi_tlb_flags +# define v7wbi_always_flags v6wbi_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v7wbi +# endif +#else +# define v7wbi_possible_flags 0 +# define v7wbi_always_flags (-1UL) +#endif + +#ifndef _TLB +#error Unknown TLB model +#endif + +#ifndef __ASSEMBLY__ + +#include + +struct cpu_tlb_fns { + void (*flush_user_range)(unsigned long, unsigned long, struct vm_area_struct *); + void (*flush_kern_range)(unsigned long, unsigned long); + unsigned long tlb_flags; +}; + +/* + * Select the calling method + */ +#ifdef MULTI_TLB + +#define __cpu_flush_user_tlb_range cpu_tlb.flush_user_range +#define __cpu_flush_kern_tlb_range cpu_tlb.flush_kern_range + +#else + +#define __cpu_flush_user_tlb_range __glue(_TLB,_flush_user_tlb_range) +#define __cpu_flush_kern_tlb_range __glue(_TLB,_flush_kern_tlb_range) + +extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *); +extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long); + +#endif + +extern struct cpu_tlb_fns cpu_tlb; + +#define __cpu_tlb_flags cpu_tlb.tlb_flags + +/* + * TLB Management + * ============== + * + * The arch/arm/mm/tlb-*.S files implement these methods. + * + * The TLB specific code is expected to perform whatever tests it + * needs to determine if it should invalidate the TLB for each + * call. Start addresses are inclusive and end addresses are + * exclusive; it is safe to round these addresses down. + * + * flush_tlb_all() + * + * Invalidate the entire TLB. + * + * flush_tlb_mm(mm) + * + * Invalidate all TLB entries in a particular address + * space. + * - mm - mm_struct describing address space + * + * flush_tlb_range(mm,start,end) + * + * Invalidate a range of TLB entries in the specified + * address space. + * - mm - mm_struct describing address space + * - start - start address (may not be aligned) + * - end - end address (exclusive, may not be aligned) + * + * flush_tlb_page(vaddr,vma) + * + * Invalidate the specified page in the specified address range. + * - vaddr - virtual address (may not be aligned) + * - vma - vma_struct describing address range + * + * flush_kern_tlb_page(kaddr) + * + * Invalidate the TLB entry for the specified page. The address + * will be in the kernels virtual memory space. Current uses + * only require the D-TLB to be invalidated. + * - kaddr - Kernel virtual memory address + */ + +/* + * We optimise the code below by: + * - building a set of TLB flags that might be set in __cpu_tlb_flags + * - building a set of TLB flags that will always be set in __cpu_tlb_flags + * - if we're going to need __cpu_tlb_flags, access it once and only once + * + * This allows us to build optimal assembly for the single-CPU type case, + * and as close to optimal given the compiler constrants for multi-CPU + * case. We could do better for the multi-CPU case if the compiler + * implemented the "%?" method, but this has been discontinued due to too + * many people getting it wrong. + */ +#define possible_tlb_flags (v3_possible_flags | \ + v4_possible_flags | \ + v4wbi_possible_flags | \ + fr_possible_flags | \ + v4wb_possible_flags | \ + v6wbi_possible_flags) + +#define always_tlb_flags (v3_always_flags & \ + v4_always_flags & \ + v4wbi_always_flags & \ + fr_always_flags & \ + v4wb_always_flags & \ + v6wbi_always_flags) + +#define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f))) + +static inline void local_flush_tlb_all(void) +{ + const int zero = 0; + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_WB)) + dsb(); + + if (tlb_flag(TLB_V3_FULL)) + asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_V4_U_FULL | TLB_V6_U_FULL)) + asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_V4_D_FULL | TLB_V6_D_FULL)) + asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL)) + asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); + + if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | + TLB_V6_I_PAGE | TLB_V6_D_PAGE | + TLB_V6_I_ASID | TLB_V6_D_ASID)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + isb(); + } +} + +static inline void local_flush_tlb_mm(struct mm_struct *mm) +{ + const int zero = 0; + const int asid = ASID(mm); + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_WB)) + dsb(); + + if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) { + if (tlb_flag(TLB_V3_FULL)) + asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_V4_U_FULL)) + asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_V4_D_FULL)) + asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_V4_I_FULL)) + asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); + } + + if (tlb_flag(TLB_V6_U_ASID)) + asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc"); + if (tlb_flag(TLB_V6_D_ASID)) + asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc"); + if (tlb_flag(TLB_V6_I_ASID)) + asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc"); + + if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | + TLB_V6_I_PAGE | TLB_V6_D_PAGE | + TLB_V6_I_ASID | TLB_V6_D_ASID)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + } +} + +static inline void +local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) +{ + const int zero = 0; + const unsigned int __tlb_flag = __cpu_tlb_flags; + + uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm); + + if (tlb_flag(TLB_WB)) + dsb(); + + if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { + if (tlb_flag(TLB_V3_PAGE)) + asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc"); + if (tlb_flag(TLB_V4_U_PAGE)) + asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc"); + if (tlb_flag(TLB_V4_D_PAGE)) + asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc"); + if (tlb_flag(TLB_V4_I_PAGE)) + asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); + if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL)) + asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); + } + + if (tlb_flag(TLB_V6_U_PAGE)) + asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc"); + if (tlb_flag(TLB_V6_D_PAGE)) + asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc"); + if (tlb_flag(TLB_V6_I_PAGE)) + asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); + + if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | + TLB_V6_I_PAGE | TLB_V6_D_PAGE | + TLB_V6_I_ASID | TLB_V6_D_ASID)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + } +} + +static inline void local_flush_tlb_kernel_page(unsigned long kaddr) +{ + const int zero = 0; + const unsigned int __tlb_flag = __cpu_tlb_flags; + + kaddr &= PAGE_MASK; + + if (tlb_flag(TLB_WB)) + dsb(); + + if (tlb_flag(TLB_V3_PAGE)) + asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc"); + if (tlb_flag(TLB_V4_U_PAGE)) + asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc"); + if (tlb_flag(TLB_V4_D_PAGE)) + asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); + if (tlb_flag(TLB_V4_I_PAGE)) + asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); + if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL)) + asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); + + if (tlb_flag(TLB_V6_U_PAGE)) + asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc"); + if (tlb_flag(TLB_V6_D_PAGE)) + asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); + if (tlb_flag(TLB_V6_I_PAGE)) + asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); + + if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | + TLB_V6_I_PAGE | TLB_V6_D_PAGE | + TLB_V6_I_ASID | TLB_V6_D_ASID)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + isb(); + } +} + +/* + * flush_pmd_entry + * + * Flush a PMD entry (word aligned, or double-word aligned) to + * RAM if the TLB for the CPU we are running on requires this. + * This is typically used when we are creating PMD entries. + * + * clean_pmd_entry + * + * Clean (but don't drain the write buffer) if the CPU requires + * these operations. This is typically used when we are removing + * PMD entries. + */ +static inline void flush_pmd_entry(pmd_t *pmd) +{ + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_DCLEAN)) + asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" + : : "r" (pmd) : "cc"); + + if (tlb_flag(TLB_L2CLEAN_FR)) + asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd" + : : "r" (pmd) : "cc"); + + if (tlb_flag(TLB_WB)) + dsb(); +} + +static inline void clean_pmd_entry(pmd_t *pmd) +{ + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_DCLEAN)) + asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" + : : "r" (pmd) : "cc"); + + if (tlb_flag(TLB_L2CLEAN_FR)) + asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd" + : : "r" (pmd) : "cc"); +} + +#undef tlb_flag +#undef always_tlb_flags +#undef possible_tlb_flags + +/* + * Convert calls to our calling convention. + */ +#define local_flush_tlb_range(vma,start,end) __cpu_flush_user_tlb_range(start,end,vma) +#define local_flush_tlb_kernel_range(s,e) __cpu_flush_kern_tlb_range(s,e) + +#ifndef CONFIG_SMP +#define flush_tlb_all local_flush_tlb_all +#define flush_tlb_mm local_flush_tlb_mm +#define flush_tlb_page local_flush_tlb_page +#define flush_tlb_kernel_page local_flush_tlb_kernel_page +#define flush_tlb_range local_flush_tlb_range +#define flush_tlb_kernel_range local_flush_tlb_kernel_range +#else +extern void flush_tlb_all(void); +extern void flush_tlb_mm(struct mm_struct *mm); +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr); +extern void flush_tlb_kernel_page(unsigned long kaddr); +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); +#endif + +/* + * if PG_dcache_dirty is set for the page, we need to ensure that any + * cache entries for the kernels virtual memory range are written + * back to the page. + */ +extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte); + +#endif + +#endif /* CONFIG_MMU */ + +#endif diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h new file mode 100644 index 000000000000..accbd7cad9b5 --- /dev/null +++ b/arch/arm/include/asm/topology.h @@ -0,0 +1,6 @@ +#ifndef _ASM_ARM_TOPOLOGY_H +#define _ASM_ARM_TOPOLOGY_H + +#include + +#endif /* _ASM_ARM_TOPOLOGY_H */ diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h new file mode 100644 index 000000000000..aa399aec568e --- /dev/null +++ b/arch/arm/include/asm/traps.h @@ -0,0 +1,29 @@ +#ifndef _ASMARM_TRAP_H +#define _ASMARM_TRAP_H + +#include + +struct undef_hook { + struct list_head node; + u32 instr_mask; + u32 instr_val; + u32 cpsr_mask; + u32 cpsr_val; + int (*fn)(struct pt_regs *regs, unsigned int instr); +}; + +void register_undef_hook(struct undef_hook *hook); +void unregister_undef_hook(struct undef_hook *hook); + +static inline int in_exception_text(unsigned long ptr) +{ + extern char __exception_text_start[]; + extern char __exception_text_end[]; + + return ptr >= (unsigned long)&__exception_text_start && + ptr < (unsigned long)&__exception_text_end; +} + +extern void __init early_trap_init(void); + +#endif diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h new file mode 100644 index 000000000000..345df01534a4 --- /dev/null +++ b/arch/arm/include/asm/types.h @@ -0,0 +1,31 @@ +#ifndef __ASM_ARM_TYPES_H +#define __ASM_ARM_TYPES_H + +#include + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; +typedef u32 dma64_addr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif + diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h new file mode 100644 index 000000000000..d0f51ff900b5 --- /dev/null +++ b/arch/arm/include/asm/uaccess.h @@ -0,0 +1,444 @@ +/* + * arch/arm/include/asm/uaccess.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_UACCESS_H +#define _ASMARM_UACCESS_H + +/* + * User space memory access functions + */ +#include +#include +#include +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +extern int fixup_exception(struct pt_regs *regs); + +/* + * These two are intentionally not defined anywhere - if the kernel + * code generates any references to them, that's a bug. + */ +extern int __get_user_bad(void); +extern int __put_user_bad(void); + +/* + * Note that this is actually 0x1,0000,0000 + */ +#define KERNEL_DS 0x00000000 +#define get_ds() (KERNEL_DS) + +#ifdef CONFIG_MMU + +#define USER_DS TASK_SIZE +#define get_fs() (current_thread_info()->addr_limit) + +static inline void set_fs(mm_segment_t fs) +{ + current_thread_info()->addr_limit = fs; + modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER); +} + +#define segment_eq(a,b) ((a) == (b)) + +#define __addr_ok(addr) ({ \ + unsigned long flag; \ + __asm__("cmp %2, %0; movlo %0, #0" \ + : "=&r" (flag) \ + : "0" (current_thread_info()->addr_limit), "r" (addr) \ + : "cc"); \ + (flag == 0); }) + +/* We use 33-bit arithmetic here... */ +#define __range_ok(addr,size) ({ \ + unsigned long flag, roksum; \ + __chk_user_ptr(addr); \ + __asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \ + : "=&r" (flag), "=&r" (roksum) \ + : "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \ + : "cc"); \ + flag; }) + +/* + * Single-value transfer routines. They automatically use the right + * size if we just have the right pointer type. Note that the functions + * which read from user space (*get_*) need to take care not to leak + * kernel data even if the calling code is buggy and fails to check + * the return value. This means zeroing out the destination variable + * or buffer on error. Normally this is done out of line by the + * fixup code, but there are a few places where it intrudes on the + * main code path. When we only write to user space, there is no + * problem. + */ +extern int __get_user_1(void *); +extern int __get_user_2(void *); +extern int __get_user_4(void *); + +#define __get_user_x(__r2,__p,__e,__s,__i...) \ + __asm__ __volatile__ ( \ + __asmeq("%0", "r0") __asmeq("%1", "r2") \ + "bl __get_user_" #__s \ + : "=&r" (__e), "=r" (__r2) \ + : "0" (__p) \ + : __i, "cc") + +#define get_user(x,p) \ + ({ \ + register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register unsigned long __r2 asm("r2"); \ + register int __e asm("r0"); \ + switch (sizeof(*(__p))) { \ + case 1: \ + __get_user_x(__r2, __p, __e, 1, "lr"); \ + break; \ + case 2: \ + __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \ + break; \ + case 4: \ + __get_user_x(__r2, __p, __e, 4, "lr"); \ + break; \ + default: __e = __get_user_bad(); break; \ + } \ + x = (typeof(*(p))) __r2; \ + __e; \ + }) + +extern int __put_user_1(void *, unsigned int); +extern int __put_user_2(void *, unsigned int); +extern int __put_user_4(void *, unsigned int); +extern int __put_user_8(void *, unsigned long long); + +#define __put_user_x(__r2,__p,__e,__s) \ + __asm__ __volatile__ ( \ + __asmeq("%0", "r0") __asmeq("%2", "r2") \ + "bl __put_user_" #__s \ + : "=&r" (__e) \ + : "0" (__p), "r" (__r2) \ + : "ip", "lr", "cc") + +#define put_user(x,p) \ + ({ \ + register const typeof(*(p)) __r2 asm("r2") = (x); \ + register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register int __e asm("r0"); \ + switch (sizeof(*(__p))) { \ + case 1: \ + __put_user_x(__r2, __p, __e, 1); \ + break; \ + case 2: \ + __put_user_x(__r2, __p, __e, 2); \ + break; \ + case 4: \ + __put_user_x(__r2, __p, __e, 4); \ + break; \ + case 8: \ + __put_user_x(__r2, __p, __e, 8); \ + break; \ + default: __e = __put_user_bad(); break; \ + } \ + __e; \ + }) + +#else /* CONFIG_MMU */ + +/* + * uClinux has only one addr space, so has simplified address limits. + */ +#define USER_DS KERNEL_DS + +#define segment_eq(a,b) (1) +#define __addr_ok(addr) (1) +#define __range_ok(addr,size) (0) +#define get_fs() (KERNEL_DS) + +static inline void set_fs(mm_segment_t fs) +{ +} + +#define get_user(x,p) __get_user(x,p) +#define put_user(x,p) __put_user(x,p) + +#endif /* CONFIG_MMU */ + +#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) + +/* + * The "__xxx" versions of the user access functions do not verify the + * address space - it must have been done previously with a separate + * "access_ok()" call. + * + * The "xxx_error" versions set the third argument to EFAULT if an + * error occurs, and leave it unchanged on success. Note that these + * versions are void (ie, don't return a value as such). + */ +#define __get_user(x,ptr) \ +({ \ + long __gu_err = 0; \ + __get_user_err((x),(ptr),__gu_err); \ + __gu_err; \ +}) + +#define __get_user_error(x,ptr,err) \ +({ \ + __get_user_err((x),(ptr),err); \ + (void) 0; \ +}) + +#define __get_user_err(x,ptr,err) \ +do { \ + unsigned long __gu_addr = (unsigned long)(ptr); \ + unsigned long __gu_val; \ + __chk_user_ptr(ptr); \ + switch (sizeof(*(ptr))) { \ + case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \ + case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \ + case 4: __get_user_asm_word(__gu_val,__gu_addr,err); break; \ + default: (__gu_val) = __get_user_bad(); \ + } \ + (x) = (__typeof__(*(ptr)))__gu_val; \ +} while (0) + +#define __get_user_asm_byte(x,addr,err) \ + __asm__ __volatile__( \ + "1: ldrbt %1,[%2],#0\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + " .align 2\n" \ + "3: mov %0, %3\n" \ + " mov %1, #0\n" \ + " b 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 3\n" \ + " .long 1b, 3b\n" \ + " .previous" \ + : "+r" (err), "=&r" (x) \ + : "r" (addr), "i" (-EFAULT) \ + : "cc") + +#ifndef __ARMEB__ +#define __get_user_asm_half(x,__gu_addr,err) \ +({ \ + unsigned long __b1, __b2; \ + __get_user_asm_byte(__b1, __gu_addr, err); \ + __get_user_asm_byte(__b2, __gu_addr + 1, err); \ + (x) = __b1 | (__b2 << 8); \ +}) +#else +#define __get_user_asm_half(x,__gu_addr,err) \ +({ \ + unsigned long __b1, __b2; \ + __get_user_asm_byte(__b1, __gu_addr, err); \ + __get_user_asm_byte(__b2, __gu_addr + 1, err); \ + (x) = (__b1 << 8) | __b2; \ +}) +#endif + +#define __get_user_asm_word(x,addr,err) \ + __asm__ __volatile__( \ + "1: ldrt %1,[%2],#0\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + " .align 2\n" \ + "3: mov %0, %3\n" \ + " mov %1, #0\n" \ + " b 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 3\n" \ + " .long 1b, 3b\n" \ + " .previous" \ + : "+r" (err), "=&r" (x) \ + : "r" (addr), "i" (-EFAULT) \ + : "cc") + +#define __put_user(x,ptr) \ +({ \ + long __pu_err = 0; \ + __put_user_err((x),(ptr),__pu_err); \ + __pu_err; \ +}) + +#define __put_user_error(x,ptr,err) \ +({ \ + __put_user_err((x),(ptr),err); \ + (void) 0; \ +}) + +#define __put_user_err(x,ptr,err) \ +do { \ + unsigned long __pu_addr = (unsigned long)(ptr); \ + __typeof__(*(ptr)) __pu_val = (x); \ + __chk_user_ptr(ptr); \ + switch (sizeof(*(ptr))) { \ + case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \ + case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \ + case 4: __put_user_asm_word(__pu_val,__pu_addr,err); break; \ + case 8: __put_user_asm_dword(__pu_val,__pu_addr,err); break; \ + default: __put_user_bad(); \ + } \ +} while (0) + +#define __put_user_asm_byte(x,__pu_addr,err) \ + __asm__ __volatile__( \ + "1: strbt %1,[%2],#0\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + " .align 2\n" \ + "3: mov %0, %3\n" \ + " b 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 3\n" \ + " .long 1b, 3b\n" \ + " .previous" \ + : "+r" (err) \ + : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ + : "cc") + +#ifndef __ARMEB__ +#define __put_user_asm_half(x,__pu_addr,err) \ +({ \ + unsigned long __temp = (unsigned long)(x); \ + __put_user_asm_byte(__temp, __pu_addr, err); \ + __put_user_asm_byte(__temp >> 8, __pu_addr + 1, err); \ +}) +#else +#define __put_user_asm_half(x,__pu_addr,err) \ +({ \ + unsigned long __temp = (unsigned long)(x); \ + __put_user_asm_byte(__temp >> 8, __pu_addr, err); \ + __put_user_asm_byte(__temp, __pu_addr + 1, err); \ +}) +#endif + +#define __put_user_asm_word(x,__pu_addr,err) \ + __asm__ __volatile__( \ + "1: strt %1,[%2],#0\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + " .align 2\n" \ + "3: mov %0, %3\n" \ + " b 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 3\n" \ + " .long 1b, 3b\n" \ + " .previous" \ + : "+r" (err) \ + : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ + : "cc") + +#ifndef __ARMEB__ +#define __reg_oper0 "%R2" +#define __reg_oper1 "%Q2" +#else +#define __reg_oper0 "%Q2" +#define __reg_oper1 "%R2" +#endif + +#define __put_user_asm_dword(x,__pu_addr,err) \ + __asm__ __volatile__( \ + "1: strt " __reg_oper1 ", [%1], #4\n" \ + "2: strt " __reg_oper0 ", [%1], #0\n" \ + "3:\n" \ + " .section .fixup,\"ax\"\n" \ + " .align 2\n" \ + "4: mov %0, %3\n" \ + " b 3b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 3\n" \ + " .long 1b, 4b\n" \ + " .long 2b, 4b\n" \ + " .previous" \ + : "+r" (err), "+r" (__pu_addr) \ + : "r" (x), "i" (-EFAULT) \ + : "cc") + + +#ifdef CONFIG_MMU +extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n); +extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n); +extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n); +#else +#define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0) +#define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0) +#define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0) +#endif + +extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count); +extern unsigned long __must_check __strnlen_user(const char __user *s, long n); + +static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n) +{ + if (access_ok(VERIFY_READ, from, n)) + n = __copy_from_user(to, from, n); + else /* security hole - plug it */ + memzero(to, n); + return n; +} + +static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n) +{ + if (access_ok(VERIFY_WRITE, to, n)) + n = __copy_to_user(to, from, n); + return n; +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +static inline unsigned long __must_check clear_user(void __user *to, unsigned long n) +{ + if (access_ok(VERIFY_WRITE, to, n)) + n = __clear_user(to, n); + return n; +} + +static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count) +{ + long res = -EFAULT; + if (access_ok(VERIFY_READ, src, 1)) + res = __strncpy_from_user(dst, src, count); + return res; +} + +#define strlen_user(s) strnlen_user(s, ~0UL >> 1) + +static inline long __must_check strnlen_user(const char __user *s, long n) +{ + unsigned long res = 0; + + if (__addr_ok(s)) + res = __strnlen_user(s, n); + + return res; +} + +#endif /* _ASMARM_UACCESS_H */ diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h new file mode 100644 index 000000000000..bf65e9f4525d --- /dev/null +++ b/arch/arm/include/asm/ucontext.h @@ -0,0 +1,103 @@ +#ifndef _ASMARM_UCONTEXT_H +#define _ASMARM_UCONTEXT_H + +#include + +/* + * struct sigcontext only has room for the basic registers, but struct + * ucontext now has room for all registers which need to be saved and + * restored. Coprocessor registers are stored in uc_regspace. Each + * coprocessor's saved state should start with a documented 32-bit magic + * number, followed by a 32-bit word giving the coproccesor's saved size. + * uc_regspace may be expanded if necessary, although this takes some + * coordination with glibc. + */ + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; + /* Allow for uc_sigmask growth. Glibc uses a 1024-bit sigset_t. */ + int __unused[32 - (sizeof (sigset_t) / sizeof (int))]; + /* Last for extensibility. Eight byte aligned because some + coprocessors require eight byte alignment. */ + unsigned long uc_regspace[128] __attribute__((__aligned__(8))); +}; + +#ifdef __KERNEL__ + +/* + * Coprocessor save state. The magic values and specific + * coprocessor's layouts are part of the userspace ABI. Each one of + * these should be a multiple of eight bytes and aligned to eight + * bytes, to prevent unpredictable padding in the signal frame. + */ + +#ifdef CONFIG_CRUNCH +#define CRUNCH_MAGIC 0x5065cf03 +#define CRUNCH_STORAGE_SIZE (CRUNCH_SIZE + 8) + +struct crunch_sigframe { + unsigned long magic; + unsigned long size; + struct crunch_state storage; +} __attribute__((__aligned__(8))); +#endif + +#ifdef CONFIG_IWMMXT +/* iwmmxt_area is 0x98 bytes long, preceeded by 8 bytes of signature */ +#define IWMMXT_MAGIC 0x12ef842a +#define IWMMXT_STORAGE_SIZE (IWMMXT_SIZE + 8) + +struct iwmmxt_sigframe { + unsigned long magic; + unsigned long size; + struct iwmmxt_struct storage; +} __attribute__((__aligned__(8))); +#endif /* CONFIG_IWMMXT */ + +#ifdef CONFIG_VFP +#if __LINUX_ARM_ARCH__ < 6 +/* For ARM pre-v6, we use fstmiax and fldmiax. This adds one extra + * word after the registers, and a word of padding at the end for + * alignment. */ +#define VFP_MAGIC 0x56465001 +#define VFP_STORAGE_SIZE 152 +#else +#define VFP_MAGIC 0x56465002 +#define VFP_STORAGE_SIZE 144 +#endif + +struct vfp_sigframe +{ + unsigned long magic; + unsigned long size; + union vfp_state storage; +}; +#endif /* CONFIG_VFP */ + +/* + * Auxiliary signal frame. This saves stuff like FP state. + * The layout of this structure is not part of the user ABI, + * because the config options aren't. uc_regspace is really + * one of these. + */ +struct aux_sigframe { +#ifdef CONFIG_CRUNCH + struct crunch_sigframe crunch; +#endif +#ifdef CONFIG_IWMMXT + struct iwmmxt_sigframe iwmmxt; +#endif +#if 0 && defined CONFIG_VFP /* Not yet saved. */ + struct vfp_sigframe vfp; +#endif + /* Something that isn't a valid magic number for any coprocessor. */ + unsigned long end_magic; +} __attribute__((__aligned__(8))); + +#endif + +#endif /* !_ASMARM_UCONTEXT_H */ diff --git a/arch/arm/include/asm/unaligned.h b/arch/arm/include/asm/unaligned.h new file mode 100644 index 000000000000..44593a894903 --- /dev/null +++ b/arch/arm/include/asm/unaligned.h @@ -0,0 +1,19 @@ +#ifndef _ASM_ARM_UNALIGNED_H +#define _ASM_ARM_UNALIGNED_H + +#include +#include +#include + +/* + * Select endianness + */ +#ifndef __ARMEB__ +#define get_unaligned __get_unaligned_le +#define put_unaligned __put_unaligned_le +#else +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be +#endif + +#endif /* _ASM_ARM_UNALIGNED_H */ diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h new file mode 100644 index 000000000000..f95fbb2fcb5f --- /dev/null +++ b/arch/arm/include/asm/unistd.h @@ -0,0 +1,450 @@ +/* + * arch/arm/include/asm/unistd.h + * + * Copyright (C) 2001-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Please forward _all_ changes to this file to rmk@arm.linux.org.uk, + * no matter what the change is. Thanks! + */ +#ifndef __ASM_ARM_UNISTD_H +#define __ASM_ARM_UNISTD_H + +#define __NR_OABI_SYSCALL_BASE 0x900000 + +#if defined(__thumb__) || defined(__ARM_EABI__) +#define __NR_SYSCALL_BASE 0 +#else +#define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE +#endif + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0) +#define __NR_exit (__NR_SYSCALL_BASE+ 1) +#define __NR_fork (__NR_SYSCALL_BASE+ 2) +#define __NR_read (__NR_SYSCALL_BASE+ 3) +#define __NR_write (__NR_SYSCALL_BASE+ 4) +#define __NR_open (__NR_SYSCALL_BASE+ 5) +#define __NR_close (__NR_SYSCALL_BASE+ 6) + /* 7 was sys_waitpid */ +#define __NR_creat (__NR_SYSCALL_BASE+ 8) +#define __NR_link (__NR_SYSCALL_BASE+ 9) +#define __NR_unlink (__NR_SYSCALL_BASE+ 10) +#define __NR_execve (__NR_SYSCALL_BASE+ 11) +#define __NR_chdir (__NR_SYSCALL_BASE+ 12) +#define __NR_time (__NR_SYSCALL_BASE+ 13) +#define __NR_mknod (__NR_SYSCALL_BASE+ 14) +#define __NR_chmod (__NR_SYSCALL_BASE+ 15) +#define __NR_lchown (__NR_SYSCALL_BASE+ 16) + /* 17 was sys_break */ + /* 18 was sys_stat */ +#define __NR_lseek (__NR_SYSCALL_BASE+ 19) +#define __NR_getpid (__NR_SYSCALL_BASE+ 20) +#define __NR_mount (__NR_SYSCALL_BASE+ 21) +#define __NR_umount (__NR_SYSCALL_BASE+ 22) +#define __NR_setuid (__NR_SYSCALL_BASE+ 23) +#define __NR_getuid (__NR_SYSCALL_BASE+ 24) +#define __NR_stime (__NR_SYSCALL_BASE+ 25) +#define __NR_ptrace (__NR_SYSCALL_BASE+ 26) +#define __NR_alarm (__NR_SYSCALL_BASE+ 27) + /* 28 was sys_fstat */ +#define __NR_pause (__NR_SYSCALL_BASE+ 29) +#define __NR_utime (__NR_SYSCALL_BASE+ 30) + /* 31 was sys_stty */ + /* 32 was sys_gtty */ +#define __NR_access (__NR_SYSCALL_BASE+ 33) +#define __NR_nice (__NR_SYSCALL_BASE+ 34) + /* 35 was sys_ftime */ +#define __NR_sync (__NR_SYSCALL_BASE+ 36) +#define __NR_kill (__NR_SYSCALL_BASE+ 37) +#define __NR_rename (__NR_SYSCALL_BASE+ 38) +#define __NR_mkdir (__NR_SYSCALL_BASE+ 39) +#define __NR_rmdir (__NR_SYSCALL_BASE+ 40) +#define __NR_dup (__NR_SYSCALL_BASE+ 41) +#define __NR_pipe (__NR_SYSCALL_BASE+ 42) +#define __NR_times (__NR_SYSCALL_BASE+ 43) + /* 44 was sys_prof */ +#define __NR_brk (__NR_SYSCALL_BASE+ 45) +#define __NR_setgid (__NR_SYSCALL_BASE+ 46) +#define __NR_getgid (__NR_SYSCALL_BASE+ 47) + /* 48 was sys_signal */ +#define __NR_geteuid (__NR_SYSCALL_BASE+ 49) +#define __NR_getegid (__NR_SYSCALL_BASE+ 50) +#define __NR_acct (__NR_SYSCALL_BASE+ 51) +#define __NR_umount2 (__NR_SYSCALL_BASE+ 52) + /* 53 was sys_lock */ +#define __NR_ioctl (__NR_SYSCALL_BASE+ 54) +#define __NR_fcntl (__NR_SYSCALL_BASE+ 55) + /* 56 was sys_mpx */ +#define __NR_setpgid (__NR_SYSCALL_BASE+ 57) + /* 58 was sys_ulimit */ + /* 59 was sys_olduname */ +#define __NR_umask (__NR_SYSCALL_BASE+ 60) +#define __NR_chroot (__NR_SYSCALL_BASE+ 61) +#define __NR_ustat (__NR_SYSCALL_BASE+ 62) +#define __NR_dup2 (__NR_SYSCALL_BASE+ 63) +#define __NR_getppid (__NR_SYSCALL_BASE+ 64) +#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65) +#define __NR_setsid (__NR_SYSCALL_BASE+ 66) +#define __NR_sigaction (__NR_SYSCALL_BASE+ 67) + /* 68 was sys_sgetmask */ + /* 69 was sys_ssetmask */ +#define __NR_setreuid (__NR_SYSCALL_BASE+ 70) +#define __NR_setregid (__NR_SYSCALL_BASE+ 71) +#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72) +#define __NR_sigpending (__NR_SYSCALL_BASE+ 73) +#define __NR_sethostname (__NR_SYSCALL_BASE+ 74) +#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75) +#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */ +#define __NR_getrusage (__NR_SYSCALL_BASE+ 77) +#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78) +#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79) +#define __NR_getgroups (__NR_SYSCALL_BASE+ 80) +#define __NR_setgroups (__NR_SYSCALL_BASE+ 81) +#define __NR_select (__NR_SYSCALL_BASE+ 82) +#define __NR_symlink (__NR_SYSCALL_BASE+ 83) + /* 84 was sys_lstat */ +#define __NR_readlink (__NR_SYSCALL_BASE+ 85) +#define __NR_uselib (__NR_SYSCALL_BASE+ 86) +#define __NR_swapon (__NR_SYSCALL_BASE+ 87) +#define __NR_reboot (__NR_SYSCALL_BASE+ 88) +#define __NR_readdir (__NR_SYSCALL_BASE+ 89) +#define __NR_mmap (__NR_SYSCALL_BASE+ 90) +#define __NR_munmap (__NR_SYSCALL_BASE+ 91) +#define __NR_truncate (__NR_SYSCALL_BASE+ 92) +#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93) +#define __NR_fchmod (__NR_SYSCALL_BASE+ 94) +#define __NR_fchown (__NR_SYSCALL_BASE+ 95) +#define __NR_getpriority (__NR_SYSCALL_BASE+ 96) +#define __NR_setpriority (__NR_SYSCALL_BASE+ 97) + /* 98 was sys_profil */ +#define __NR_statfs (__NR_SYSCALL_BASE+ 99) +#define __NR_fstatfs (__NR_SYSCALL_BASE+100) + /* 101 was sys_ioperm */ +#define __NR_socketcall (__NR_SYSCALL_BASE+102) +#define __NR_syslog (__NR_SYSCALL_BASE+103) +#define __NR_setitimer (__NR_SYSCALL_BASE+104) +#define __NR_getitimer (__NR_SYSCALL_BASE+105) +#define __NR_stat (__NR_SYSCALL_BASE+106) +#define __NR_lstat (__NR_SYSCALL_BASE+107) +#define __NR_fstat (__NR_SYSCALL_BASE+108) + /* 109 was sys_uname */ + /* 110 was sys_iopl */ +#define __NR_vhangup (__NR_SYSCALL_BASE+111) + /* 112 was sys_idle */ +#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */ +#define __NR_wait4 (__NR_SYSCALL_BASE+114) +#define __NR_swapoff (__NR_SYSCALL_BASE+115) +#define __NR_sysinfo (__NR_SYSCALL_BASE+116) +#define __NR_ipc (__NR_SYSCALL_BASE+117) +#define __NR_fsync (__NR_SYSCALL_BASE+118) +#define __NR_sigreturn (__NR_SYSCALL_BASE+119) +#define __NR_clone (__NR_SYSCALL_BASE+120) +#define __NR_setdomainname (__NR_SYSCALL_BASE+121) +#define __NR_uname (__NR_SYSCALL_BASE+122) + /* 123 was sys_modify_ldt */ +#define __NR_adjtimex (__NR_SYSCALL_BASE+124) +#define __NR_mprotect (__NR_SYSCALL_BASE+125) +#define __NR_sigprocmask (__NR_SYSCALL_BASE+126) + /* 127 was sys_create_module */ +#define __NR_init_module (__NR_SYSCALL_BASE+128) +#define __NR_delete_module (__NR_SYSCALL_BASE+129) + /* 130 was sys_get_kernel_syms */ +#define __NR_quotactl (__NR_SYSCALL_BASE+131) +#define __NR_getpgid (__NR_SYSCALL_BASE+132) +#define __NR_fchdir (__NR_SYSCALL_BASE+133) +#define __NR_bdflush (__NR_SYSCALL_BASE+134) +#define __NR_sysfs (__NR_SYSCALL_BASE+135) +#define __NR_personality (__NR_SYSCALL_BASE+136) + /* 137 was sys_afs_syscall */ +#define __NR_setfsuid (__NR_SYSCALL_BASE+138) +#define __NR_setfsgid (__NR_SYSCALL_BASE+139) +#define __NR__llseek (__NR_SYSCALL_BASE+140) +#define __NR_getdents (__NR_SYSCALL_BASE+141) +#define __NR__newselect (__NR_SYSCALL_BASE+142) +#define __NR_flock (__NR_SYSCALL_BASE+143) +#define __NR_msync (__NR_SYSCALL_BASE+144) +#define __NR_readv (__NR_SYSCALL_BASE+145) +#define __NR_writev (__NR_SYSCALL_BASE+146) +#define __NR_getsid (__NR_SYSCALL_BASE+147) +#define __NR_fdatasync (__NR_SYSCALL_BASE+148) +#define __NR__sysctl (__NR_SYSCALL_BASE+149) +#define __NR_mlock (__NR_SYSCALL_BASE+150) +#define __NR_munlock (__NR_SYSCALL_BASE+151) +#define __NR_mlockall (__NR_SYSCALL_BASE+152) +#define __NR_munlockall (__NR_SYSCALL_BASE+153) +#define __NR_sched_setparam (__NR_SYSCALL_BASE+154) +#define __NR_sched_getparam (__NR_SYSCALL_BASE+155) +#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156) +#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157) +#define __NR_sched_yield (__NR_SYSCALL_BASE+158) +#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159) +#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160) +#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161) +#define __NR_nanosleep (__NR_SYSCALL_BASE+162) +#define __NR_mremap (__NR_SYSCALL_BASE+163) +#define __NR_setresuid (__NR_SYSCALL_BASE+164) +#define __NR_getresuid (__NR_SYSCALL_BASE+165) + /* 166 was sys_vm86 */ + /* 167 was sys_query_module */ +#define __NR_poll (__NR_SYSCALL_BASE+168) +#define __NR_nfsservctl (__NR_SYSCALL_BASE+169) +#define __NR_setresgid (__NR_SYSCALL_BASE+170) +#define __NR_getresgid (__NR_SYSCALL_BASE+171) +#define __NR_prctl (__NR_SYSCALL_BASE+172) +#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173) +#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174) +#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175) +#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176) +#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177) +#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178) +#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179) +#define __NR_pread64 (__NR_SYSCALL_BASE+180) +#define __NR_pwrite64 (__NR_SYSCALL_BASE+181) +#define __NR_chown (__NR_SYSCALL_BASE+182) +#define __NR_getcwd (__NR_SYSCALL_BASE+183) +#define __NR_capget (__NR_SYSCALL_BASE+184) +#define __NR_capset (__NR_SYSCALL_BASE+185) +#define __NR_sigaltstack (__NR_SYSCALL_BASE+186) +#define __NR_sendfile (__NR_SYSCALL_BASE+187) + /* 188 reserved */ + /* 189 reserved */ +#define __NR_vfork (__NR_SYSCALL_BASE+190) +#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */ +#define __NR_mmap2 (__NR_SYSCALL_BASE+192) +#define __NR_truncate64 (__NR_SYSCALL_BASE+193) +#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194) +#define __NR_stat64 (__NR_SYSCALL_BASE+195) +#define __NR_lstat64 (__NR_SYSCALL_BASE+196) +#define __NR_fstat64 (__NR_SYSCALL_BASE+197) +#define __NR_lchown32 (__NR_SYSCALL_BASE+198) +#define __NR_getuid32 (__NR_SYSCALL_BASE+199) +#define __NR_getgid32 (__NR_SYSCALL_BASE+200) +#define __NR_geteuid32 (__NR_SYSCALL_BASE+201) +#define __NR_getegid32 (__NR_SYSCALL_BASE+202) +#define __NR_setreuid32 (__NR_SYSCALL_BASE+203) +#define __NR_setregid32 (__NR_SYSCALL_BASE+204) +#define __NR_getgroups32 (__NR_SYSCALL_BASE+205) +#define __NR_setgroups32 (__NR_SYSCALL_BASE+206) +#define __NR_fchown32 (__NR_SYSCALL_BASE+207) +#define __NR_setresuid32 (__NR_SYSCALL_BASE+208) +#define __NR_getresuid32 (__NR_SYSCALL_BASE+209) +#define __NR_setresgid32 (__NR_SYSCALL_BASE+210) +#define __NR_getresgid32 (__NR_SYSCALL_BASE+211) +#define __NR_chown32 (__NR_SYSCALL_BASE+212) +#define __NR_setuid32 (__NR_SYSCALL_BASE+213) +#define __NR_setgid32 (__NR_SYSCALL_BASE+214) +#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215) +#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216) +#define __NR_getdents64 (__NR_SYSCALL_BASE+217) +#define __NR_pivot_root (__NR_SYSCALL_BASE+218) +#define __NR_mincore (__NR_SYSCALL_BASE+219) +#define __NR_madvise (__NR_SYSCALL_BASE+220) +#define __NR_fcntl64 (__NR_SYSCALL_BASE+221) + /* 222 for tux */ + /* 223 is unused */ +#define __NR_gettid (__NR_SYSCALL_BASE+224) +#define __NR_readahead (__NR_SYSCALL_BASE+225) +#define __NR_setxattr (__NR_SYSCALL_BASE+226) +#define __NR_lsetxattr (__NR_SYSCALL_BASE+227) +#define __NR_fsetxattr (__NR_SYSCALL_BASE+228) +#define __NR_getxattr (__NR_SYSCALL_BASE+229) +#define __NR_lgetxattr (__NR_SYSCALL_BASE+230) +#define __NR_fgetxattr (__NR_SYSCALL_BASE+231) +#define __NR_listxattr (__NR_SYSCALL_BASE+232) +#define __NR_llistxattr (__NR_SYSCALL_BASE+233) +#define __NR_flistxattr (__NR_SYSCALL_BASE+234) +#define __NR_removexattr (__NR_SYSCALL_BASE+235) +#define __NR_lremovexattr (__NR_SYSCALL_BASE+236) +#define __NR_fremovexattr (__NR_SYSCALL_BASE+237) +#define __NR_tkill (__NR_SYSCALL_BASE+238) +#define __NR_sendfile64 (__NR_SYSCALL_BASE+239) +#define __NR_futex (__NR_SYSCALL_BASE+240) +#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241) +#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242) +#define __NR_io_setup (__NR_SYSCALL_BASE+243) +#define __NR_io_destroy (__NR_SYSCALL_BASE+244) +#define __NR_io_getevents (__NR_SYSCALL_BASE+245) +#define __NR_io_submit (__NR_SYSCALL_BASE+246) +#define __NR_io_cancel (__NR_SYSCALL_BASE+247) +#define __NR_exit_group (__NR_SYSCALL_BASE+248) +#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249) +#define __NR_epoll_create (__NR_SYSCALL_BASE+250) +#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251) +#define __NR_epoll_wait (__NR_SYSCALL_BASE+252) +#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253) + /* 254 for set_thread_area */ + /* 255 for get_thread_area */ +#define __NR_set_tid_address (__NR_SYSCALL_BASE+256) +#define __NR_timer_create (__NR_SYSCALL_BASE+257) +#define __NR_timer_settime (__NR_SYSCALL_BASE+258) +#define __NR_timer_gettime (__NR_SYSCALL_BASE+259) +#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260) +#define __NR_timer_delete (__NR_SYSCALL_BASE+261) +#define __NR_clock_settime (__NR_SYSCALL_BASE+262) +#define __NR_clock_gettime (__NR_SYSCALL_BASE+263) +#define __NR_clock_getres (__NR_SYSCALL_BASE+264) +#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265) +#define __NR_statfs64 (__NR_SYSCALL_BASE+266) +#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267) +#define __NR_tgkill (__NR_SYSCALL_BASE+268) +#define __NR_utimes (__NR_SYSCALL_BASE+269) +#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270) +#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271) +#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272) +#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273) +#define __NR_mq_open (__NR_SYSCALL_BASE+274) +#define __NR_mq_unlink (__NR_SYSCALL_BASE+275) +#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276) +#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277) +#define __NR_mq_notify (__NR_SYSCALL_BASE+278) +#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279) +#define __NR_waitid (__NR_SYSCALL_BASE+280) +#define __NR_socket (__NR_SYSCALL_BASE+281) +#define __NR_bind (__NR_SYSCALL_BASE+282) +#define __NR_connect (__NR_SYSCALL_BASE+283) +#define __NR_listen (__NR_SYSCALL_BASE+284) +#define __NR_accept (__NR_SYSCALL_BASE+285) +#define __NR_getsockname (__NR_SYSCALL_BASE+286) +#define __NR_getpeername (__NR_SYSCALL_BASE+287) +#define __NR_socketpair (__NR_SYSCALL_BASE+288) +#define __NR_send (__NR_SYSCALL_BASE+289) +#define __NR_sendto (__NR_SYSCALL_BASE+290) +#define __NR_recv (__NR_SYSCALL_BASE+291) +#define __NR_recvfrom (__NR_SYSCALL_BASE+292) +#define __NR_shutdown (__NR_SYSCALL_BASE+293) +#define __NR_setsockopt (__NR_SYSCALL_BASE+294) +#define __NR_getsockopt (__NR_SYSCALL_BASE+295) +#define __NR_sendmsg (__NR_SYSCALL_BASE+296) +#define __NR_recvmsg (__NR_SYSCALL_BASE+297) +#define __NR_semop (__NR_SYSCALL_BASE+298) +#define __NR_semget (__NR_SYSCALL_BASE+299) +#define __NR_semctl (__NR_SYSCALL_BASE+300) +#define __NR_msgsnd (__NR_SYSCALL_BASE+301) +#define __NR_msgrcv (__NR_SYSCALL_BASE+302) +#define __NR_msgget (__NR_SYSCALL_BASE+303) +#define __NR_msgctl (__NR_SYSCALL_BASE+304) +#define __NR_shmat (__NR_SYSCALL_BASE+305) +#define __NR_shmdt (__NR_SYSCALL_BASE+306) +#define __NR_shmget (__NR_SYSCALL_BASE+307) +#define __NR_shmctl (__NR_SYSCALL_BASE+308) +#define __NR_add_key (__NR_SYSCALL_BASE+309) +#define __NR_request_key (__NR_SYSCALL_BASE+310) +#define __NR_keyctl (__NR_SYSCALL_BASE+311) +#define __NR_semtimedop (__NR_SYSCALL_BASE+312) +#define __NR_vserver (__NR_SYSCALL_BASE+313) +#define __NR_ioprio_set (__NR_SYSCALL_BASE+314) +#define __NR_ioprio_get (__NR_SYSCALL_BASE+315) +#define __NR_inotify_init (__NR_SYSCALL_BASE+316) +#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317) +#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318) +#define __NR_mbind (__NR_SYSCALL_BASE+319) +#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320) +#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321) +#define __NR_openat (__NR_SYSCALL_BASE+322) +#define __NR_mkdirat (__NR_SYSCALL_BASE+323) +#define __NR_mknodat (__NR_SYSCALL_BASE+324) +#define __NR_fchownat (__NR_SYSCALL_BASE+325) +#define __NR_futimesat (__NR_SYSCALL_BASE+326) +#define __NR_fstatat64 (__NR_SYSCALL_BASE+327) +#define __NR_unlinkat (__NR_SYSCALL_BASE+328) +#define __NR_renameat (__NR_SYSCALL_BASE+329) +#define __NR_linkat (__NR_SYSCALL_BASE+330) +#define __NR_symlinkat (__NR_SYSCALL_BASE+331) +#define __NR_readlinkat (__NR_SYSCALL_BASE+332) +#define __NR_fchmodat (__NR_SYSCALL_BASE+333) +#define __NR_faccessat (__NR_SYSCALL_BASE+334) + /* 335 for pselect6 */ + /* 336 for ppoll */ +#define __NR_unshare (__NR_SYSCALL_BASE+337) +#define __NR_set_robust_list (__NR_SYSCALL_BASE+338) +#define __NR_get_robust_list (__NR_SYSCALL_BASE+339) +#define __NR_splice (__NR_SYSCALL_BASE+340) +#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341) +#define __NR_sync_file_range2 __NR_arm_sync_file_range +#define __NR_tee (__NR_SYSCALL_BASE+342) +#define __NR_vmsplice (__NR_SYSCALL_BASE+343) +#define __NR_move_pages (__NR_SYSCALL_BASE+344) +#define __NR_getcpu (__NR_SYSCALL_BASE+345) + /* 346 for epoll_pwait */ +#define __NR_kexec_load (__NR_SYSCALL_BASE+347) +#define __NR_utimensat (__NR_SYSCALL_BASE+348) +#define __NR_signalfd (__NR_SYSCALL_BASE+349) +#define __NR_timerfd_create (__NR_SYSCALL_BASE+350) +#define __NR_eventfd (__NR_SYSCALL_BASE+351) +#define __NR_fallocate (__NR_SYSCALL_BASE+352) +#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) +#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) + +/* + * The following SWIs are ARM private. + */ +#define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000) +#define __ARM_NR_breakpoint (__ARM_NR_BASE+1) +#define __ARM_NR_cacheflush (__ARM_NR_BASE+2) +#define __ARM_NR_usr26 (__ARM_NR_BASE+3) +#define __ARM_NR_usr32 (__ARM_NR_BASE+4) +#define __ARM_NR_set_tls (__ARM_NR_BASE+5) + +/* + * The following syscalls are obsolete and no longer available for EABI. + */ +#if defined(__ARM_EABI__) && !defined(__KERNEL__) +#undef __NR_time +#undef __NR_umount +#undef __NR_stime +#undef __NR_alarm +#undef __NR_utime +#undef __NR_getrlimit +#undef __NR_select +#undef __NR_readdir +#undef __NR_mmap +#undef __NR_socketcall +#undef __NR_syscall +#undef __NR_ipc +#endif + +#ifdef __KERNEL__ + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION + +#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT) +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_SYS_SOCKETCALL +#endif + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") + +/* + * Unimplemented (or alternatively implemented) syscalls + */ +#define __IGNORE_fadvise64_64 1 + +#endif /* __KERNEL__ */ +#endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/include/asm/user.h b/arch/arm/include/asm/user.h new file mode 100644 index 000000000000..825c1e7c582d --- /dev/null +++ b/arch/arm/include/asm/user.h @@ -0,0 +1,84 @@ +#ifndef _ARM_USER_H +#define _ARM_USER_H + +#include +#include +/* Core file format: The core file is written in such a way that gdb + can understand it and provide useful information to the user (under + linux we use the 'trad-core' bfd). There are quite a number of + obstacles to being able to view the contents of the floating point + registers, and until these are solved you will not be able to view the + contents of them. Actually, you can read in the core file and look at + the contents of the user struct to find out what the floating point + registers contain. + The actual file contents are as follows: + UPAGE: 1 page consisting of a user struct that tells gdb what is present + in the file. Directly after this is a copy of the task_struct, which + is currently not used by gdb, but it may come in useful at some point. + All of the registers are stored as part of the upage. The upage should + always be only one page. + DATA: The data area is stored. We use current->end_text to + current->brk to pick up all of the user variables, plus any memory + that may have been malloced. No attempt is made to determine if a page + is demand-zero or if a page is totally unused, we just cover the entire + range. All of the addresses are rounded in such a way that an integral + number of pages is written. + STACK: We need the stack information in order to get a meaningful + backtrace. We need to write the data from (esp) to + current->start_stack, so we round each of these off in order to be able + to write an integer number of pages. + The minimum core file size is 3 pages, or 12288 bytes. +*/ + +struct user_fp { + struct fp_reg { + unsigned int sign1:1; + unsigned int unused:15; + unsigned int sign2:1; + unsigned int exponent:14; + unsigned int j:1; + unsigned int mantissa1:31; + unsigned int mantissa0:32; + } fpregs[8]; + unsigned int fpsr:32; + unsigned int fpcr:32; + unsigned char ftype[8]; + unsigned int init_flag; +}; + +/* When the kernel dumps core, it starts by dumping the user struct - + this will be used by gdb to figure out where the data and stack segments + are within the file, and what virtual addresses to use. */ +struct user{ +/* We start with the registers, to mimic the way that "memory" is returned + from the ptrace(3,...) function. */ + struct pt_regs regs; /* Where the registers are actually stored */ +/* ptrace does not yet supply these. Someday.... */ + int u_fpvalid; /* True if math co-processor being used. */ + /* for this mess. Not yet used. */ +/* The rest of this junk is to help gdb figure out what goes where */ + unsigned long int u_tsize; /* Text segment size (pages). */ + unsigned long int u_dsize; /* Data segment size (pages). */ + unsigned long int u_ssize; /* Stack segment size (pages). */ + unsigned long start_code; /* Starting virtual address of text. */ + unsigned long start_stack; /* Starting virtual address of stack area. + This is actually the bottom of the stack, + the top of the stack is always found in the + esp register. */ + long int signal; /* Signal that caused the core dump. */ + int reserved; /* No longer used */ + unsigned long u_ar0; /* Used by gdb to help find the values for */ + /* the registers. */ + unsigned long magic; /* To uniquely identify a core file */ + char u_comm[32]; /* User command that was responsible */ + int u_debugreg[8]; + struct user_fp u_fp; /* FP state */ + struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */ + /* the FP registers. */ +}; +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* _ARM_USER_H */ diff --git a/arch/arm/include/asm/vfp.h b/arch/arm/include/asm/vfp.h new file mode 100644 index 000000000000..f4ab34fd4f72 --- /dev/null +++ b/arch/arm/include/asm/vfp.h @@ -0,0 +1,84 @@ +/* + * arch/arm/include/asm/vfp.h + * + * VFP register definitions. + * First, the standard VFP set. + */ + +#define FPSID cr0 +#define FPSCR cr1 +#define MVFR1 cr6 +#define MVFR0 cr7 +#define FPEXC cr8 +#define FPINST cr9 +#define FPINST2 cr10 + +/* FPSID bits */ +#define FPSID_IMPLEMENTER_BIT (24) +#define FPSID_IMPLEMENTER_MASK (0xff << FPSID_IMPLEMENTER_BIT) +#define FPSID_SOFTWARE (1<<23) +#define FPSID_FORMAT_BIT (21) +#define FPSID_FORMAT_MASK (0x3 << FPSID_FORMAT_BIT) +#define FPSID_NODOUBLE (1<<20) +#define FPSID_ARCH_BIT (16) +#define FPSID_ARCH_MASK (0xF << FPSID_ARCH_BIT) +#define FPSID_PART_BIT (8) +#define FPSID_PART_MASK (0xFF << FPSID_PART_BIT) +#define FPSID_VARIANT_BIT (4) +#define FPSID_VARIANT_MASK (0xF << FPSID_VARIANT_BIT) +#define FPSID_REV_BIT (0) +#define FPSID_REV_MASK (0xF << FPSID_REV_BIT) + +/* FPEXC bits */ +#define FPEXC_EX (1 << 31) +#define FPEXC_EN (1 << 30) +#define FPEXC_DEX (1 << 29) +#define FPEXC_FP2V (1 << 28) +#define FPEXC_VV (1 << 27) +#define FPEXC_TFV (1 << 26) +#define FPEXC_LENGTH_BIT (8) +#define FPEXC_LENGTH_MASK (7 << FPEXC_LENGTH_BIT) +#define FPEXC_IDF (1 << 7) +#define FPEXC_IXF (1 << 4) +#define FPEXC_UFF (1 << 3) +#define FPEXC_OFF (1 << 2) +#define FPEXC_DZF (1 << 1) +#define FPEXC_IOF (1 << 0) +#define FPEXC_TRAP_MASK (FPEXC_IDF|FPEXC_IXF|FPEXC_UFF|FPEXC_OFF|FPEXC_DZF|FPEXC_IOF) + +/* FPSCR bits */ +#define FPSCR_DEFAULT_NAN (1<<25) +#define FPSCR_FLUSHTOZERO (1<<24) +#define FPSCR_ROUND_NEAREST (0<<22) +#define FPSCR_ROUND_PLUSINF (1<<22) +#define FPSCR_ROUND_MINUSINF (2<<22) +#define FPSCR_ROUND_TOZERO (3<<22) +#define FPSCR_RMODE_BIT (22) +#define FPSCR_RMODE_MASK (3 << FPSCR_RMODE_BIT) +#define FPSCR_STRIDE_BIT (20) +#define FPSCR_STRIDE_MASK (3 << FPSCR_STRIDE_BIT) +#define FPSCR_LENGTH_BIT (16) +#define FPSCR_LENGTH_MASK (7 << FPSCR_LENGTH_BIT) +#define FPSCR_IOE (1<<8) +#define FPSCR_DZE (1<<9) +#define FPSCR_OFE (1<<10) +#define FPSCR_UFE (1<<11) +#define FPSCR_IXE (1<<12) +#define FPSCR_IDE (1<<15) +#define FPSCR_IOC (1<<0) +#define FPSCR_DZC (1<<1) +#define FPSCR_OFC (1<<2) +#define FPSCR_UFC (1<<3) +#define FPSCR_IXC (1<<4) +#define FPSCR_IDC (1<<7) + +/* MVFR0 bits */ +#define MVFR0_A_SIMD_BIT (0) +#define MVFR0_A_SIMD_MASK (0xf << MVFR0_A_SIMD_BIT) + +/* Bit patterns for decoding the packaged operation descriptors */ +#define VFPOPDESC_LENGTH_BIT (9) +#define VFPOPDESC_LENGTH_MASK (0x07 << VFPOPDESC_LENGTH_BIT) +#define VFPOPDESC_UNUSED_BIT (24) +#define VFPOPDESC_UNUSED_MASK (0xFF << VFPOPDESC_UNUSED_BIT) +#define VFPOPDESC_OPDESC_MASK (~(VFPOPDESC_LENGTH_MASK | VFPOPDESC_UNUSED_MASK)) diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h new file mode 100644 index 000000000000..422f3cc204a2 --- /dev/null +++ b/arch/arm/include/asm/vfpmacros.h @@ -0,0 +1,47 @@ +/* + * arch/arm/include/asm/vfpmacros.h + * + * Assembler-only file containing VFP macros and register definitions. + */ +#include "vfp.h" + +@ Macros to allow building with old toolkits (with no VFP support) + .macro VFPFMRX, rd, sysreg, cond + MRC\cond p10, 7, \rd, \sysreg, cr0, 0 @ FMRX \rd, \sysreg + .endm + + .macro VFPFMXR, sysreg, rd, cond + MCR\cond p10, 7, \rd, \sysreg, cr0, 0 @ FMXR \sysreg, \rd + .endm + + @ read all the working registers back into the VFP + .macro VFPFLDMIA, base, tmp +#if __LINUX_ARM_ARCH__ < 6 + LDC p11, cr0, [\base],#33*4 @ FLDMIAX \base!, {d0-d15} +#else + LDC p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d0-d15} +#endif +#ifdef CONFIG_VFPv3 + VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 + and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field + cmp \tmp, #2 @ 32 x 64bit registers? + ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + addne \base, \base, #32*4 @ step over unused register space +#endif + .endm + + @ write all the working registers out of the VFP + .macro VFPFSTMIA, base, tmp +#if __LINUX_ARM_ARCH__ < 6 + STC p11, cr0, [\base],#33*4 @ FSTMIAX \base!, {d0-d15} +#else + STC p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d0-d15} +#endif +#ifdef CONFIG_VFPv3 + VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 + and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field + cmp \tmp, #2 @ 32 x 64bit registers? + stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + addne \base, \base, #32*4 @ step over unused register space +#endif + .endm diff --git a/arch/arm/include/asm/vga.h b/arch/arm/include/asm/vga.h new file mode 100644 index 000000000000..1e0b913c3d71 --- /dev/null +++ b/arch/arm/include/asm/vga.h @@ -0,0 +1,12 @@ +#ifndef ASMARM_VGA_H +#define ASMARM_VGA_H + +#include +#include + +#define VGA_MAP_MEM(x,s) (PCIMEM_BASE + (x)) + +#define vga_readb(x) (*((volatile unsigned char *)x)) +#define vga_writeb(x,y) (*((volatile unsigned char *)y) = (x)) + +#endif diff --git a/arch/arm/include/asm/xor.h b/arch/arm/include/asm/xor.h new file mode 100644 index 000000000000..7604673dc427 --- /dev/null +++ b/arch/arm/include/asm/xor.h @@ -0,0 +1,141 @@ +/* + * arch/arm/include/asm/xor.h + * + * Copyright (C) 2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + +#define __XOR(a1, a2) a1 ^= a2 + +#define GET_BLOCK_2(dst) \ + __asm__("ldmia %0, {%1, %2}" \ + : "=r" (dst), "=r" (a1), "=r" (a2) \ + : "0" (dst)) + +#define GET_BLOCK_4(dst) \ + __asm__("ldmia %0, {%1, %2, %3, %4}" \ + : "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \ + : "0" (dst)) + +#define XOR_BLOCK_2(src) \ + __asm__("ldmia %0!, {%1, %2}" \ + : "=r" (src), "=r" (b1), "=r" (b2) \ + : "0" (src)); \ + __XOR(a1, b1); __XOR(a2, b2); + +#define XOR_BLOCK_4(src) \ + __asm__("ldmia %0!, {%1, %2, %3, %4}" \ + : "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \ + : "0" (src)); \ + __XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4) + +#define PUT_BLOCK_2(dst) \ + __asm__ __volatile__("stmia %0!, {%2, %3}" \ + : "=r" (dst) \ + : "0" (dst), "r" (a1), "r" (a2)) + +#define PUT_BLOCK_4(dst) \ + __asm__ __volatile__("stmia %0!, {%2, %3, %4, %5}" \ + : "=r" (dst) \ + : "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4)) + +static void +xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) +{ + unsigned int lines = bytes / sizeof(unsigned long) / 4; + register unsigned int a1 __asm__("r4"); + register unsigned int a2 __asm__("r5"); + register unsigned int a3 __asm__("r6"); + register unsigned int a4 __asm__("r7"); + register unsigned int b1 __asm__("r8"); + register unsigned int b2 __asm__("r9"); + register unsigned int b3 __asm__("ip"); + register unsigned int b4 __asm__("lr"); + + do { + GET_BLOCK_4(p1); + XOR_BLOCK_4(p2); + PUT_BLOCK_4(p1); + } while (--lines); +} + +static void +xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3) +{ + unsigned int lines = bytes / sizeof(unsigned long) / 4; + register unsigned int a1 __asm__("r4"); + register unsigned int a2 __asm__("r5"); + register unsigned int a3 __asm__("r6"); + register unsigned int a4 __asm__("r7"); + register unsigned int b1 __asm__("r8"); + register unsigned int b2 __asm__("r9"); + register unsigned int b3 __asm__("ip"); + register unsigned int b4 __asm__("lr"); + + do { + GET_BLOCK_4(p1); + XOR_BLOCK_4(p2); + XOR_BLOCK_4(p3); + PUT_BLOCK_4(p1); + } while (--lines); +} + +static void +xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4) +{ + unsigned int lines = bytes / sizeof(unsigned long) / 2; + register unsigned int a1 __asm__("r8"); + register unsigned int a2 __asm__("r9"); + register unsigned int b1 __asm__("ip"); + register unsigned int b2 __asm__("lr"); + + do { + GET_BLOCK_2(p1); + XOR_BLOCK_2(p2); + XOR_BLOCK_2(p3); + XOR_BLOCK_2(p4); + PUT_BLOCK_2(p1); + } while (--lines); +} + +static void +xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4, unsigned long *p5) +{ + unsigned int lines = bytes / sizeof(unsigned long) / 2; + register unsigned int a1 __asm__("r8"); + register unsigned int a2 __asm__("r9"); + register unsigned int b1 __asm__("ip"); + register unsigned int b2 __asm__("lr"); + + do { + GET_BLOCK_2(p1); + XOR_BLOCK_2(p2); + XOR_BLOCK_2(p3); + XOR_BLOCK_2(p4); + XOR_BLOCK_2(p5); + PUT_BLOCK_2(p1); + } while (--lines); +} + +static struct xor_block_template xor_block_arm4regs = { + .name = "arm4regs", + .do_2 = xor_arm4regs_2, + .do_3 = xor_arm4regs_3, + .do_4 = xor_arm4regs_4, + .do_5 = xor_arm4regs_5, +}; + +#undef XOR_TRY_TEMPLATES +#define XOR_TRY_TEMPLATES \ + do { \ + xor_speed(&xor_block_arm4regs); \ + xor_speed(&xor_block_8regs); \ + xor_speed(&xor_block_32regs); \ + } while (0) diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 7e9c00a8a412..1c3c6ea5f9e7 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -181,7 +181,7 @@ ENTRY(lookup_processor_type) ldmfd sp!, {r4 - r7, r9, pc} /* - * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for + * Look in and arch/arm/kernel/arch.[ch] for * more information about the __proc_info and __arch_info structures. */ .long __proc_info_begin diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 1dd8ea4f9a9c..2034d4dbe6ad 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -20,7 +20,7 @@ * r2, r3 contains the zero-extended value * lr corrupted * - * No other registers must be altered. (see include/asm-arm/uaccess.h + * No other registers must be altered. (see * for specific ASM register usage). * * Note that ADDR_LIMIT is either 0 or 0xc0000000. diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 8620afe54f72..08ec7dffa52e 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -20,7 +20,7 @@ * Outputs: r0 is the error code * lr corrupted * - * No other registers must be altered. (see include/asm-arm/uaccess.h + * No other registers must be altered. (see * for specific ASM register usage). * * Note that ADDR_LIMIT is either 0 or 0xc0000000 diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 303a7ff6bfd2..b81dbf9ffb77 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -259,7 +259,7 @@ remap_area_supersections(unsigned long virt, unsigned long pfn, * caller shouldn't need to know that small detail. * * 'flags' are the extra L_PTE_ flags that you want to specify for this - * mapping. See include/asm-arm/proc-armv/pgtable.h for more information. + * mapping. See for more information. */ void __iomem * __arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size, diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index d64f8e6f75ab..eda733d30455 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -231,7 +231,7 @@ cpu_arm720_name: .align /* - * See linux/include/asm-arm/procinfo.h for a definition of this structure. + * See for a definition of this structure. */ .section ".proc.info.init", #alloc, #execinstr diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h index 4a4d02c09112..386cbd13eaf4 100644 --- a/arch/arm/nwfpe/fpa11.h +++ b/arch/arm/nwfpe/fpa11.h @@ -69,7 +69,7 @@ typedef union tagFPREG { * This structure is exported to user space. Do not re-order. * Only add new stuff to the end, and do not change the size of * any element. Elements of this structure are used by user - * space, and must match struct user_fp in include/asm-arm/user.h. + * space, and must match struct user_fp in . * We include the byte offsets below for documentation purposes. * * The size of this structure and FPREG are checked by fpmodule.c diff --git a/include/asm-arm/Kbuild b/include/asm-arm/Kbuild deleted file mode 100644 index 73237bd130a2..000000000000 --- a/include/asm-arm/Kbuild +++ /dev/null @@ -1,3 +0,0 @@ -include include/asm-generic/Kbuild.asm - -unifdef-y += hwcap.h diff --git a/include/asm-arm/a.out-core.h b/include/asm-arm/a.out-core.h deleted file mode 100644 index 93d04acaa31f..000000000000 --- a/include/asm-arm/a.out-core.h +++ /dev/null @@ -1,49 +0,0 @@ -/* a.out coredump register dumper - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_A_OUT_CORE_H -#define _ASM_A_OUT_CORE_H - -#ifdef __KERNEL__ - -#include -#include - -/* - * fill in the user structure for an a.out core dump - */ -static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump) -{ - struct task_struct *tsk = current; - - dump->magic = CMAGIC; - dump->start_code = tsk->mm->start_code; - dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1); - - dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT; - dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT; - dump->u_ssize = 0; - - dump->u_debugreg[0] = tsk->thread.debug.bp[0].address; - dump->u_debugreg[1] = tsk->thread.debug.bp[1].address; - dump->u_debugreg[2] = tsk->thread.debug.bp[0].insn.arm; - dump->u_debugreg[3] = tsk->thread.debug.bp[1].insn.arm; - dump->u_debugreg[4] = tsk->thread.debug.nsaved; - - if (dump->start_stack < 0x04000000) - dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT; - - dump->regs = *regs; - dump->u_fpvalid = dump_fpu (regs, &dump->u_fp); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_A_OUT_CORE_H */ diff --git a/include/asm-arm/a.out.h b/include/asm-arm/a.out.h deleted file mode 100644 index 79489fdcc8b8..000000000000 --- a/include/asm-arm/a.out.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef __ARM_A_OUT_H__ -#define __ARM_A_OUT_H__ - -#include -#include - -struct exec -{ - __u32 a_info; /* Use macros N_MAGIC, etc for access */ - __u32 a_text; /* length of text, in bytes */ - __u32 a_data; /* length of data, in bytes */ - __u32 a_bss; /* length of uninitialized data area for file, in bytes */ - __u32 a_syms; /* length of symbol table data in file, in bytes */ - __u32 a_entry; /* start address */ - __u32 a_trsize; /* length of relocation info for text, in bytes */ - __u32 a_drsize; /* length of relocation info for data, in bytes */ -}; - -/* - * This is always the same - */ -#define N_TXTADDR(a) (0x00008000) - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#define M_ARM 103 - -#ifndef LIBRARY_START_TEXT -#define LIBRARY_START_TEXT (0x00c00000) -#endif - -#endif /* __A_OUT_GNU_H__ */ diff --git a/include/asm-arm/assembler.h b/include/asm-arm/assembler.h deleted file mode 100644 index 911393b2c6f0..000000000000 --- a/include/asm-arm/assembler.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * linux/include/asm-arm/assembler.h - * - * Copyright (C) 1996-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file contains arm architecture specific defines - * for the different processors. - * - * Do not include any C declarations in this file - it is included by - * assembler source. - */ -#ifndef __ASSEMBLY__ -#error "Only include this from assembly code" -#endif - -#include - -/* - * Endian independent macros for shifting bytes within registers. - */ -#ifndef __ARMEB__ -#define pull lsr -#define push lsl -#define get_byte_0 lsl #0 -#define get_byte_1 lsr #8 -#define get_byte_2 lsr #16 -#define get_byte_3 lsr #24 -#define put_byte_0 lsl #0 -#define put_byte_1 lsl #8 -#define put_byte_2 lsl #16 -#define put_byte_3 lsl #24 -#else -#define pull lsl -#define push lsr -#define get_byte_0 lsr #24 -#define get_byte_1 lsr #16 -#define get_byte_2 lsr #8 -#define get_byte_3 lsl #0 -#define put_byte_0 lsl #24 -#define put_byte_1 lsl #16 -#define put_byte_2 lsl #8 -#define put_byte_3 lsl #0 -#endif - -/* - * Data preload for architectures that support it - */ -#if __LINUX_ARM_ARCH__ >= 5 -#define PLD(code...) code -#else -#define PLD(code...) -#endif - -/* - * This can be used to enable code to cacheline align the destination - * pointer when bulk writing to memory. Experiments on StrongARM and - * XScale didn't show this a worthwhile thing to do when the cache is not - * set to write-allocate (this would need further testing on XScale when WA - * is used). - * - * On Feroceon there is much to gain however, regardless of cache mode. - */ -#ifdef CONFIG_CPU_FEROCEON -#define CALGN(code...) code -#else -#define CALGN(code...) -#endif - -/* - * Enable and disable interrupts - */ -#if __LINUX_ARM_ARCH__ >= 6 - .macro disable_irq - cpsid i - .endm - - .macro enable_irq - cpsie i - .endm -#else - .macro disable_irq - msr cpsr_c, #PSR_I_BIT | SVC_MODE - .endm - - .macro enable_irq - msr cpsr_c, #SVC_MODE - .endm -#endif - -/* - * Save the current IRQ state and disable IRQs. Note that this macro - * assumes FIQs are enabled, and that the processor is in SVC mode. - */ - .macro save_and_disable_irqs, oldcpsr - mrs \oldcpsr, cpsr - disable_irq - .endm - -/* - * Restore interrupt state previously stored in a register. We don't - * guarantee that this will preserve the flags. - */ - .macro restore_irqs, oldcpsr - msr cpsr_c, \oldcpsr - .endm - -#define USER(x...) \ -9999: x; \ - .section __ex_table,"a"; \ - .align 3; \ - .long 9999b,9001f; \ - .previous diff --git a/include/asm-arm/atomic.h b/include/asm-arm/atomic.h deleted file mode 100644 index 3b59f94b5a3d..000000000000 --- a/include/asm-arm/atomic.h +++ /dev/null @@ -1,212 +0,0 @@ -/* - * linux/include/asm-arm/atomic.h - * - * Copyright (C) 1996 Russell King. - * Copyright (C) 2002 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_ATOMIC_H -#define __ASM_ARM_ATOMIC_H - -#include -#include - -typedef struct { volatile int counter; } atomic_t; - -#define ATOMIC_INIT(i) { (i) } - -#ifdef __KERNEL__ - -#define atomic_read(v) ((v)->counter) - -#if __LINUX_ARM_ARCH__ >= 6 - -/* - * ARMv6 UP and SMP safe atomic ops. We use load exclusive and - * store exclusive to ensure that these are atomic. We may loop - * to ensure that the update happens. Writing to 'v->counter' - * without using the following operations WILL break the atomic - * nature of these ops. - */ -static inline void atomic_set(atomic_t *v, int i) -{ - unsigned long tmp; - - __asm__ __volatile__("@ atomic_set\n" -"1: ldrex %0, [%1]\n" -" strex %0, %2, [%1]\n" -" teq %0, #0\n" -" bne 1b" - : "=&r" (tmp) - : "r" (&v->counter), "r" (i) - : "cc"); -} - -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long tmp; - int result; - - __asm__ __volatile__("@ atomic_add_return\n" -"1: ldrex %0, [%2]\n" -" add %0, %0, %3\n" -" strex %1, %0, [%2]\n" -" teq %1, #0\n" -" bne 1b" - : "=&r" (result), "=&r" (tmp) - : "r" (&v->counter), "Ir" (i) - : "cc"); - - return result; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long tmp; - int result; - - __asm__ __volatile__("@ atomic_sub_return\n" -"1: ldrex %0, [%2]\n" -" sub %0, %0, %3\n" -" strex %1, %0, [%2]\n" -" teq %1, #0\n" -" bne 1b" - : "=&r" (result), "=&r" (tmp) - : "r" (&v->counter), "Ir" (i) - : "cc"); - - return result; -} - -static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) -{ - unsigned long oldval, res; - - do { - __asm__ __volatile__("@ atomic_cmpxchg\n" - "ldrex %1, [%2]\n" - "mov %0, #0\n" - "teq %1, %3\n" - "strexeq %0, %4, [%2]\n" - : "=&r" (res), "=&r" (oldval) - : "r" (&ptr->counter), "Ir" (old), "r" (new) - : "cc"); - } while (res); - - return oldval; -} - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) -{ - unsigned long tmp, tmp2; - - __asm__ __volatile__("@ atomic_clear_mask\n" -"1: ldrex %0, [%2]\n" -" bic %0, %0, %3\n" -" strex %1, %0, [%2]\n" -" teq %1, #0\n" -" bne 1b" - : "=&r" (tmp), "=&r" (tmp2) - : "r" (addr), "Ir" (mask) - : "cc"); -} - -#else /* ARM_ARCH_6 */ - -#include - -#ifdef CONFIG_SMP -#error SMP not supported on pre-ARMv6 CPUs -#endif - -#define atomic_set(v,i) (((v)->counter) = (i)) - -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long flags; - int val; - - raw_local_irq_save(flags); - val = v->counter; - v->counter = val += i; - raw_local_irq_restore(flags); - - return val; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long flags; - int val; - - raw_local_irq_save(flags); - val = v->counter; - v->counter = val -= i; - raw_local_irq_restore(flags); - - return val; -} - -static inline int atomic_cmpxchg(atomic_t *v, int old, int new) -{ - int ret; - unsigned long flags; - - raw_local_irq_save(flags); - ret = v->counter; - if (likely(ret == old)) - v->counter = new; - raw_local_irq_restore(flags); - - return ret; -} - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) -{ - unsigned long flags; - - raw_local_irq_save(flags); - *addr &= ~mask; - raw_local_irq_restore(flags); -} - -#endif /* __LINUX_ARM_ARCH__ */ - -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -static inline int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - - c = atomic_read(v); - while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c) - c = old; - return c != u; -} -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -#define atomic_add(i, v) (void) atomic_add_return(i, v) -#define atomic_inc(v) (void) atomic_add_return(1, v) -#define atomic_sub(i, v) (void) atomic_sub_return(i, v) -#define atomic_dec(v) (void) atomic_sub_return(1, v) - -#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0) -#define atomic_inc_return(v) (atomic_add_return(1, v)) -#define atomic_dec_return(v) (atomic_sub_return(1, v)) -#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0) - -#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0) - -/* Atomic operations are already serializing on ARM */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include -#endif -#endif diff --git a/include/asm-arm/auxvec.h b/include/asm-arm/auxvec.h deleted file mode 100644 index c0536f6b29a7..000000000000 --- a/include/asm-arm/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMARM_AUXVEC_H -#define __ASMARM_AUXVEC_H - -#endif diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h deleted file mode 100644 index 9a1db20e032a..000000000000 --- a/include/asm-arm/bitops.h +++ /dev/null @@ -1,340 +0,0 @@ -/* - * Copyright 1995, Russell King. - * Various bits and pieces copyrights include: - * Linus Torvalds (test_bit). - * Big endian support: Copyright 2001, Nicolas Pitre - * reworked by rmk. - * - * bit 0 is the LSB of an "unsigned long" quantity. - * - * Please note that the code in this file should never be included - * from user space. Many of these are not implemented in assembler - * since they would be too costly. Also, they require privileged - * instructions (which are not available from user mode) to ensure - * that they are atomic. - */ - -#ifndef __ASM_ARM_BITOPS_H -#define __ASM_ARM_BITOPS_H - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include -#include - -#define smp_mb__before_clear_bit() mb() -#define smp_mb__after_clear_bit() mb() - -/* - * These functions are the basis of our bit ops. - * - * First, the atomic bitops. These use native endian. - */ -static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long flags; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - raw_local_irq_save(flags); - *p |= mask; - raw_local_irq_restore(flags); -} - -static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long flags; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - raw_local_irq_save(flags); - *p &= ~mask; - raw_local_irq_restore(flags); -} - -static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long flags; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - raw_local_irq_save(flags); - *p ^= mask; - raw_local_irq_restore(flags); -} - -static inline int -____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long flags; - unsigned int res; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - raw_local_irq_save(flags); - res = *p; - *p = res | mask; - raw_local_irq_restore(flags); - - return res & mask; -} - -static inline int -____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long flags; - unsigned int res; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - raw_local_irq_save(flags); - res = *p; - *p = res & ~mask; - raw_local_irq_restore(flags); - - return res & mask; -} - -static inline int -____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p) -{ - unsigned long flags; - unsigned int res; - unsigned long mask = 1UL << (bit & 31); - - p += bit >> 5; - - raw_local_irq_save(flags); - res = *p; - *p = res ^ mask; - raw_local_irq_restore(flags); - - return res & mask; -} - -#include - -/* - * A note about Endian-ness. - * ------------------------- - * - * When the ARM is put into big endian mode via CR15, the processor - * merely swaps the order of bytes within words, thus: - * - * ------------ physical data bus bits ----------- - * D31 ... D24 D23 ... D16 D15 ... D8 D7 ... D0 - * little byte 3 byte 2 byte 1 byte 0 - * big byte 0 byte 1 byte 2 byte 3 - * - * This means that reading a 32-bit word at address 0 returns the same - * value irrespective of the endian mode bit. - * - * Peripheral devices should be connected with the data bus reversed in - * "Big Endian" mode. ARM Application Note 61 is applicable, and is - * available from http://www.arm.com/. - * - * The following assumes that the data bus connectivity for big endian - * mode has been followed. - * - * Note that bit 0 is defined to be 32-bit word bit 0, not byte 0 bit 0. - */ - -/* - * Little endian assembly bitops. nr = 0 -> byte 0 bit 0. - */ -extern void _set_bit_le(int nr, volatile unsigned long * p); -extern void _clear_bit_le(int nr, volatile unsigned long * p); -extern void _change_bit_le(int nr, volatile unsigned long * p); -extern int _test_and_set_bit_le(int nr, volatile unsigned long * p); -extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p); -extern int _test_and_change_bit_le(int nr, volatile unsigned long * p); -extern int _find_first_zero_bit_le(const void * p, unsigned size); -extern int _find_next_zero_bit_le(const void * p, int size, int offset); -extern int _find_first_bit_le(const unsigned long *p, unsigned size); -extern int _find_next_bit_le(const unsigned long *p, int size, int offset); - -/* - * Big endian assembly bitops. nr = 0 -> byte 3 bit 0. - */ -extern void _set_bit_be(int nr, volatile unsigned long * p); -extern void _clear_bit_be(int nr, volatile unsigned long * p); -extern void _change_bit_be(int nr, volatile unsigned long * p); -extern int _test_and_set_bit_be(int nr, volatile unsigned long * p); -extern int _test_and_clear_bit_be(int nr, volatile unsigned long * p); -extern int _test_and_change_bit_be(int nr, volatile unsigned long * p); -extern int _find_first_zero_bit_be(const void * p, unsigned size); -extern int _find_next_zero_bit_be(const void * p, int size, int offset); -extern int _find_first_bit_be(const unsigned long *p, unsigned size); -extern int _find_next_bit_be(const unsigned long *p, int size, int offset); - -#ifndef CONFIG_SMP -/* - * The __* form of bitops are non-atomic and may be reordered. - */ -#define ATOMIC_BITOP_LE(name,nr,p) \ - (__builtin_constant_p(nr) ? \ - ____atomic_##name(nr, p) : \ - _##name##_le(nr,p)) - -#define ATOMIC_BITOP_BE(name,nr,p) \ - (__builtin_constant_p(nr) ? \ - ____atomic_##name(nr, p) : \ - _##name##_be(nr,p)) -#else -#define ATOMIC_BITOP_LE(name,nr,p) _##name##_le(nr,p) -#define ATOMIC_BITOP_BE(name,nr,p) _##name##_be(nr,p) -#endif - -#define NONATOMIC_BITOP(name,nr,p) \ - (____nonatomic_##name(nr, p)) - -#ifndef __ARMEB__ -/* - * These are the little endian, atomic definitions. - */ -#define set_bit(nr,p) ATOMIC_BITOP_LE(set_bit,nr,p) -#define clear_bit(nr,p) ATOMIC_BITOP_LE(clear_bit,nr,p) -#define change_bit(nr,p) ATOMIC_BITOP_LE(change_bit,nr,p) -#define test_and_set_bit(nr,p) ATOMIC_BITOP_LE(test_and_set_bit,nr,p) -#define test_and_clear_bit(nr,p) ATOMIC_BITOP_LE(test_and_clear_bit,nr,p) -#define test_and_change_bit(nr,p) ATOMIC_BITOP_LE(test_and_change_bit,nr,p) -#define find_first_zero_bit(p,sz) _find_first_zero_bit_le(p,sz) -#define find_next_zero_bit(p,sz,off) _find_next_zero_bit_le(p,sz,off) -#define find_first_bit(p,sz) _find_first_bit_le(p,sz) -#define find_next_bit(p,sz,off) _find_next_bit_le(p,sz,off) - -#define WORD_BITOFF_TO_LE(x) ((x)) - -#else - -/* - * These are the big endian, atomic definitions. - */ -#define set_bit(nr,p) ATOMIC_BITOP_BE(set_bit,nr,p) -#define clear_bit(nr,p) ATOMIC_BITOP_BE(clear_bit,nr,p) -#define change_bit(nr,p) ATOMIC_BITOP_BE(change_bit,nr,p) -#define test_and_set_bit(nr,p) ATOMIC_BITOP_BE(test_and_set_bit,nr,p) -#define test_and_clear_bit(nr,p) ATOMIC_BITOP_BE(test_and_clear_bit,nr,p) -#define test_and_change_bit(nr,p) ATOMIC_BITOP_BE(test_and_change_bit,nr,p) -#define find_first_zero_bit(p,sz) _find_first_zero_bit_be(p,sz) -#define find_next_zero_bit(p,sz,off) _find_next_zero_bit_be(p,sz,off) -#define find_first_bit(p,sz) _find_first_bit_be(p,sz) -#define find_next_bit(p,sz,off) _find_next_bit_be(p,sz,off) - -#define WORD_BITOFF_TO_LE(x) ((x) ^ 0x18) - -#endif - -#if __LINUX_ARM_ARCH__ < 5 - -#include -#include -#include -#include - -#else - -static inline int constant_fls(int x) -{ - int r = 32; - - if (!x) - return 0; - if (!(x & 0xffff0000u)) { - x <<= 16; - r -= 16; - } - if (!(x & 0xff000000u)) { - x <<= 8; - r -= 8; - } - if (!(x & 0xf0000000u)) { - x <<= 4; - r -= 4; - } - if (!(x & 0xc0000000u)) { - x <<= 2; - r -= 2; - } - if (!(x & 0x80000000u)) { - x <<= 1; - r -= 1; - } - return r; -} - -/* - * On ARMv5 and above those functions can be implemented around - * the clz instruction for much better code efficiency. - */ - -#define __fls(x) \ - ( __builtin_constant_p(x) ? constant_fls(x) : \ - ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) ) - -/* Implement fls() in C so that 64-bit args are suitably truncated */ -static inline int fls(int x) -{ - return __fls(x); -} - -#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); }) -#define __ffs(x) (ffs(x) - 1) -#define ffz(x) __ffs( ~(x) ) - -#endif - -#include - -#include -#include -#include - -/* - * Ext2 is defined to use little-endian byte ordering. - * These do not need to be atomic. - */ -#define ext2_set_bit(nr,p) \ - __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define ext2_set_bit_atomic(lock,nr,p) \ - test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define ext2_clear_bit(nr,p) \ - __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define ext2_clear_bit_atomic(lock,nr,p) \ - test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define ext2_test_bit(nr,p) \ - test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define ext2_find_first_zero_bit(p,sz) \ - _find_first_zero_bit_le(p,sz) -#define ext2_find_next_zero_bit(p,sz,off) \ - _find_next_zero_bit_le(p,sz,off) -#define ext2_find_next_bit(p, sz, off) \ - _find_next_bit_le(p, sz, off) - -/* - * Minix is defined to use little-endian byte ordering. - * These do not need to be atomic. - */ -#define minix_set_bit(nr,p) \ - __set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define minix_test_bit(nr,p) \ - test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define minix_test_and_set_bit(nr,p) \ - __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define minix_test_and_clear_bit(nr,p) \ - __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) -#define minix_find_first_zero_bit(p,sz) \ - _find_first_zero_bit_le(p,sz) - -#endif /* __KERNEL__ */ - -#endif /* _ARM_BITOPS_H */ diff --git a/include/asm-arm/bug.h b/include/asm-arm/bug.h deleted file mode 100644 index 7b62351f097d..000000000000 --- a/include/asm-arm/bug.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _ASMARM_BUG_H -#define _ASMARM_BUG_H - - -#ifdef CONFIG_BUG -#ifdef CONFIG_DEBUG_BUGVERBOSE -extern void __bug(const char *file, int line) __attribute__((noreturn)); - -/* give file/line information */ -#define BUG() __bug(__FILE__, __LINE__) - -#else - -/* this just causes an oops */ -#define BUG() (*(int *)0 = 0) - -#endif - -#define HAVE_ARCH_BUG -#endif - -#include - -#endif diff --git a/include/asm-arm/bugs.h b/include/asm-arm/bugs.h deleted file mode 100644 index ca54eb0f12d7..000000000000 --- a/include/asm-arm/bugs.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/bugs.h - * - * Copyright (C) 1995-2003 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_BUGS_H -#define __ASM_BUGS_H - -#ifdef CONFIG_MMU -extern void check_writebuffer_bugs(void); - -#define check_bugs() check_writebuffer_bugs() -#else -#define check_bugs() do { } while (0) -#endif - -#endif diff --git a/include/asm-arm/byteorder.h b/include/asm-arm/byteorder.h deleted file mode 100644 index e6f7fcdc73b0..000000000000 --- a/include/asm-arm/byteorder.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * linux/include/asm-arm/byteorder.h - * - * ARM Endian-ness. In little endian mode, the data bus is connected such - * that byte accesses appear as: - * 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31 - * and word accesses (data or instruction) appear as: - * d0...d31 - * - * When in big endian mode, byte accesses appear as: - * 0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7 - * and word accesses (data or instruction) appear as: - * d0...d31 - */ -#ifndef __ASM_ARM_BYTEORDER_H -#define __ASM_ARM_BYTEORDER_H - -#include -#include - -static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) -{ - __u32 t; - -#ifndef __thumb__ - if (!__builtin_constant_p(x)) { - /* - * The compiler needs a bit of a hint here to always do the - * right thing and not screw it up to different degrees - * depending on the gcc version. - */ - asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x)); - } else -#endif - t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ - - x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */ - t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */ - x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */ - - return x; -} - -#define __arch__swab32(x) ___arch__swab32(x) - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#ifdef __ARMEB__ -#include -#else -#include -#endif - -#endif - diff --git a/include/asm-arm/cache.h b/include/asm-arm/cache.h deleted file mode 100644 index 31332c8ac04e..000000000000 --- a/include/asm-arm/cache.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * linux/include/asm-arm/cache.h - */ -#ifndef __ASMARM_CACHE_H -#define __ASMARM_CACHE_H - -#define L1_CACHE_SHIFT 5 -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -#endif diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h deleted file mode 100644 index e68a1cbcc852..000000000000 --- a/include/asm-arm/cacheflush.h +++ /dev/null @@ -1,537 +0,0 @@ -/* - * linux/include/asm-arm/cacheflush.h - * - * Copyright (C) 1999-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_CACHEFLUSH_H -#define _ASMARM_CACHEFLUSH_H - -#include -#include - -#include -#include - -#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) - -/* - * Cache Model - * =========== - */ -#undef _CACHE -#undef MULTI_CACHE - -#if defined(CONFIG_CPU_CACHE_V3) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE v3 -# endif -#endif - -#if defined(CONFIG_CPU_CACHE_V4) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE v4 -# endif -#endif - -#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \ - defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) -# define MULTI_CACHE 1 -#endif - -#if defined(CONFIG_CPU_ARM926T) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE arm926 -# endif -#endif - -#if defined(CONFIG_CPU_ARM940T) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE arm940 -# endif -#endif - -#if defined(CONFIG_CPU_ARM946E) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE arm946 -# endif -#endif - -#if defined(CONFIG_CPU_CACHE_V4WB) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE v4wb -# endif -#endif - -#if defined(CONFIG_CPU_XSCALE) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE xscale -# endif -#endif - -#if defined(CONFIG_CPU_XSC3) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE xsc3 -# endif -#endif - -#if defined(CONFIG_CPU_FEROCEON) -# define MULTI_CACHE 1 -#endif - -#if defined(CONFIG_CPU_V6) -//# ifdef _CACHE -# define MULTI_CACHE 1 -//# else -//# define _CACHE v6 -//# endif -#endif - -#if defined(CONFIG_CPU_V7) -//# ifdef _CACHE -# define MULTI_CACHE 1 -//# else -//# define _CACHE v7 -//# endif -#endif - -#if !defined(_CACHE) && !defined(MULTI_CACHE) -#error Unknown cache maintainence model -#endif - -/* - * This flag is used to indicate that the page pointed to by a pte - * is dirty and requires cleaning before returning it to the user. - */ -#define PG_dcache_dirty PG_arch_1 - -/* - * MM Cache Management - * =================== - * - * The arch/arm/mm/cache-*.S and arch/arm/mm/proc-*.S files - * implement these methods. - * - * Start addresses are inclusive and end addresses are exclusive; - * start addresses should be rounded down, end addresses up. - * - * See Documentation/cachetlb.txt for more information. - * Please note that the implementation of these, and the required - * effects are cache-type (VIVT/VIPT/PIPT) specific. - * - * flush_cache_kern_all() - * - * Unconditionally clean and invalidate the entire cache. - * - * flush_cache_user_mm(mm) - * - * Clean and invalidate all user space cache entries - * before a change of page tables. - * - * flush_cache_user_range(start, end, flags) - * - * Clean and invalidate a range of cache entries in the - * specified address space before a change of page tables. - * - start - user start address (inclusive, page aligned) - * - end - user end address (exclusive, page aligned) - * - flags - vma->vm_flags field - * - * coherent_kern_range(start, end) - * - * Ensure coherency between the Icache and the Dcache in the - * region described by start, end. If you have non-snooping - * Harvard caches, you need to implement this function. - * - start - virtual start address - * - end - virtual end address - * - * DMA Cache Coherency - * =================== - * - * dma_inv_range(start, end) - * - * Invalidate (discard) the specified virtual address range. - * May not write back any entries. If 'start' or 'end' - * are not cache line aligned, those lines must be written - * back. - * - start - virtual start address - * - end - virtual end address - * - * dma_clean_range(start, end) - * - * Clean (write back) the specified virtual address range. - * - start - virtual start address - * - end - virtual end address - * - * dma_flush_range(start, end) - * - * Clean and invalidate the specified virtual address range. - * - start - virtual start address - * - end - virtual end address - */ - -struct cpu_cache_fns { - void (*flush_kern_all)(void); - void (*flush_user_all)(void); - void (*flush_user_range)(unsigned long, unsigned long, unsigned int); - - void (*coherent_kern_range)(unsigned long, unsigned long); - void (*coherent_user_range)(unsigned long, unsigned long); - void (*flush_kern_dcache_page)(void *); - - void (*dma_inv_range)(const void *, const void *); - void (*dma_clean_range)(const void *, const void *); - void (*dma_flush_range)(const void *, const void *); -}; - -struct outer_cache_fns { - void (*inv_range)(unsigned long, unsigned long); - void (*clean_range)(unsigned long, unsigned long); - void (*flush_range)(unsigned long, unsigned long); -}; - -/* - * Select the calling method - */ -#ifdef MULTI_CACHE - -extern struct cpu_cache_fns cpu_cache; - -#define __cpuc_flush_kern_all cpu_cache.flush_kern_all -#define __cpuc_flush_user_all cpu_cache.flush_user_all -#define __cpuc_flush_user_range cpu_cache.flush_user_range -#define __cpuc_coherent_kern_range cpu_cache.coherent_kern_range -#define __cpuc_coherent_user_range cpu_cache.coherent_user_range -#define __cpuc_flush_dcache_page cpu_cache.flush_kern_dcache_page - -/* - * These are private to the dma-mapping API. Do not use directly. - * Their sole purpose is to ensure that data held in the cache - * is visible to DMA, or data written by DMA to system memory is - * visible to the CPU. - */ -#define dmac_inv_range cpu_cache.dma_inv_range -#define dmac_clean_range cpu_cache.dma_clean_range -#define dmac_flush_range cpu_cache.dma_flush_range - -#else - -#define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all) -#define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all) -#define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) -#define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) -#define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) -#define __cpuc_flush_dcache_page __glue(_CACHE,_flush_kern_dcache_page) - -extern void __cpuc_flush_kern_all(void); -extern void __cpuc_flush_user_all(void); -extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int); -extern void __cpuc_coherent_kern_range(unsigned long, unsigned long); -extern void __cpuc_coherent_user_range(unsigned long, unsigned long); -extern void __cpuc_flush_dcache_page(void *); - -/* - * These are private to the dma-mapping API. Do not use directly. - * Their sole purpose is to ensure that data held in the cache - * is visible to DMA, or data written by DMA to system memory is - * visible to the CPU. - */ -#define dmac_inv_range __glue(_CACHE,_dma_inv_range) -#define dmac_clean_range __glue(_CACHE,_dma_clean_range) -#define dmac_flush_range __glue(_CACHE,_dma_flush_range) - -extern void dmac_inv_range(const void *, const void *); -extern void dmac_clean_range(const void *, const void *); -extern void dmac_flush_range(const void *, const void *); - -#endif - -#ifdef CONFIG_OUTER_CACHE - -extern struct outer_cache_fns outer_cache; - -static inline void outer_inv_range(unsigned long start, unsigned long end) -{ - if (outer_cache.inv_range) - outer_cache.inv_range(start, end); -} -static inline void outer_clean_range(unsigned long start, unsigned long end) -{ - if (outer_cache.clean_range) - outer_cache.clean_range(start, end); -} -static inline void outer_flush_range(unsigned long start, unsigned long end) -{ - if (outer_cache.flush_range) - outer_cache.flush_range(start, end); -} - -#else - -static inline void outer_inv_range(unsigned long start, unsigned long end) -{ } -static inline void outer_clean_range(unsigned long start, unsigned long end) -{ } -static inline void outer_flush_range(unsigned long start, unsigned long end) -{ } - -#endif - -/* - * flush_cache_vmap() is used when creating mappings (eg, via vmap, - * vmalloc, ioremap etc) in kernel space for pages. Since the - * direct-mappings of these pages may contain cached data, we need - * to do a full cache flush to ensure that writebacks don't corrupt - * data placed into these pages via the new mappings. - */ -#define flush_cache_vmap(start, end) flush_cache_all() -#define flush_cache_vunmap(start, end) flush_cache_all() - -/* - * Copy user data from/to a page which is mapped into a different - * processes address space. Really, we want to allow our "user - * space" model to handle this. - */ -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - memcpy(dst, src, len); \ - flush_ptrace_access(vma, page, vaddr, dst, len, 1);\ - } while (0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - memcpy(dst, src, len); \ - } while (0) - -/* - * Convert calls to our calling convention. - */ -#define flush_cache_all() __cpuc_flush_kern_all() -#ifndef CONFIG_CPU_CACHE_VIPT -static inline void flush_cache_mm(struct mm_struct *mm) -{ - if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) - __cpuc_flush_user_all(); -} - -static inline void -flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) -{ - if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) - __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end), - vma->vm_flags); -} - -static inline void -flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) -{ - if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { - unsigned long addr = user_addr & PAGE_MASK; - __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags); - } -} - -static inline void -flush_ptrace_access(struct vm_area_struct *vma, struct page *page, - unsigned long uaddr, void *kaddr, - unsigned long len, int write) -{ - if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { - unsigned long addr = (unsigned long)kaddr; - __cpuc_coherent_kern_range(addr, addr + len); - } -} -#else -extern void flush_cache_mm(struct mm_struct *mm); -extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); -extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn); -extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, - unsigned long uaddr, void *kaddr, - unsigned long len, int write); -#endif - -#define flush_cache_dup_mm(mm) flush_cache_mm(mm) - -/* - * flush_cache_user_range is used when we want to ensure that the - * Harvard caches are synchronised for the user space address range. - * This is used for the ARM private sys_cacheflush system call. - */ -#define flush_cache_user_range(vma,start,end) \ - __cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end)) - -/* - * Perform necessary cache operations to ensure that data previously - * stored within this range of addresses can be executed by the CPU. - */ -#define flush_icache_range(s,e) __cpuc_coherent_kern_range(s,e) - -/* - * Perform necessary cache operations to ensure that the TLB will - * see data written in the specified area. - */ -#define clean_dcache_area(start,size) cpu_dcache_clean_area(start, size) - -/* - * flush_dcache_page is used when the kernel has written to the page - * cache page at virtual address page->virtual. - * - * If this page isn't mapped (ie, page_mapping == NULL), or it might - * have userspace mappings, then we _must_ always clean + invalidate - * the dcache entries associated with the kernel mapping. - * - * Otherwise we can defer the operation, and clean the cache when we are - * about to change to user space. This is the same method as used on SPARC64. - * See update_mmu_cache for the user space part. - */ -extern void flush_dcache_page(struct page *); - -extern void __flush_dcache_page(struct address_space *mapping, struct page *page); - -static inline void __flush_icache_all(void) -{ - asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n" - : - : "r" (0)); -} - -#define ARCH_HAS_FLUSH_ANON_PAGE -static inline void flush_anon_page(struct vm_area_struct *vma, - struct page *page, unsigned long vmaddr) -{ - extern void __flush_anon_page(struct vm_area_struct *vma, - struct page *, unsigned long); - if (PageAnon(page)) - __flush_anon_page(vma, page, vmaddr); -} - -#define flush_dcache_mmap_lock(mapping) \ - spin_lock_irq(&(mapping)->tree_lock) -#define flush_dcache_mmap_unlock(mapping) \ - spin_unlock_irq(&(mapping)->tree_lock) - -#define flush_icache_user_range(vma,page,addr,len) \ - flush_dcache_page(page) - -/* - * We don't appear to need to do anything here. In fact, if we did, we'd - * duplicate cache flushing elsewhere performed by flush_dcache_page(). - */ -#define flush_icache_page(vma,page) do { } while (0) - -static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt, - unsigned offset, size_t size) -{ - const void *start = (void __force *)virt + offset; - dmac_inv_range(start, start + size); -} - -#define __cacheid_present(val) (val != read_cpuid(CPUID_ID)) -#define __cacheid_type_v7(val) ((val & (7 << 29)) == (4 << 29)) - -#define __cacheid_vivt_prev7(val) ((val & (15 << 25)) != (14 << 25)) -#define __cacheid_vipt_prev7(val) ((val & (15 << 25)) == (14 << 25)) -#define __cacheid_vipt_nonaliasing_prev7(val) ((val & (15 << 25 | 1 << 23)) == (14 << 25)) -#define __cacheid_vipt_aliasing_prev7(val) ((val & (15 << 25 | 1 << 23)) == (14 << 25 | 1 << 23)) - -#define __cacheid_vivt(val) (__cacheid_type_v7(val) ? 0 : __cacheid_vivt_prev7(val)) -#define __cacheid_vipt(val) (__cacheid_type_v7(val) ? 1 : __cacheid_vipt_prev7(val)) -#define __cacheid_vipt_nonaliasing(val) (__cacheid_type_v7(val) ? 1 : __cacheid_vipt_nonaliasing_prev7(val)) -#define __cacheid_vipt_aliasing(val) (__cacheid_type_v7(val) ? 0 : __cacheid_vipt_aliasing_prev7(val)) -#define __cacheid_vivt_asid_tagged_instr(val) (__cacheid_type_v7(val) ? ((val & (3 << 14)) == (1 << 14)) : 0) - -#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT) -/* - * VIVT caches only - */ -#define cache_is_vivt() 1 -#define cache_is_vipt() 0 -#define cache_is_vipt_nonaliasing() 0 -#define cache_is_vipt_aliasing() 0 -#define icache_is_vivt_asid_tagged() 0 - -#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT) -/* - * VIPT caches only - */ -#define cache_is_vivt() 0 -#define cache_is_vipt() 1 -#define cache_is_vipt_nonaliasing() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - __cacheid_vipt_nonaliasing(__val); \ - }) - -#define cache_is_vipt_aliasing() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - __cacheid_vipt_aliasing(__val); \ - }) - -#define icache_is_vivt_asid_tagged() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - __cacheid_vivt_asid_tagged_instr(__val); \ - }) - -#else -/* - * VIVT or VIPT caches. Note that this is unreliable since ARM926 - * and V6 CPUs satisfy the "(val & (15 << 25)) == (14 << 25)" test. - * There's no way to tell from the CacheType register what type (!) - * the cache is. - */ -#define cache_is_vivt() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - (!__cacheid_present(__val)) || __cacheid_vivt(__val); \ - }) - -#define cache_is_vipt() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - __cacheid_present(__val) && __cacheid_vipt(__val); \ - }) - -#define cache_is_vipt_nonaliasing() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - __cacheid_present(__val) && \ - __cacheid_vipt_nonaliasing(__val); \ - }) - -#define cache_is_vipt_aliasing() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - __cacheid_present(__val) && \ - __cacheid_vipt_aliasing(__val); \ - }) - -#define icache_is_vivt_asid_tagged() \ - ({ \ - unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ - __cacheid_present(__val) && \ - __cacheid_vivt_asid_tagged_instr(__val); \ - }) - -#endif - -#endif diff --git a/include/asm-arm/checksum.h b/include/asm-arm/checksum.h deleted file mode 100644 index eaa0efd8d0d4..000000000000 --- a/include/asm-arm/checksum.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * linux/include/asm-arm/checksum.h - * - * IP checksum routines - * - * Copyright (C) Original authors of ../asm-i386/checksum.h - * Copyright (C) 1996-1999 Russell King - */ -#ifndef __ASM_ARM_CHECKSUM_H -#define __ASM_ARM_CHECKSUM_H - -#include - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums, and handles user-space pointer exceptions correctly, when needed. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -__wsum -csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum); - -__wsum -csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr); - -/* - * Fold a partial checksum without adding pseudo headers - */ -static inline __sum16 csum_fold(__wsum sum) -{ - __asm__( - "add %0, %1, %1, ror #16 @ csum_fold" - : "=r" (sum) - : "r" (sum) - : "cc"); - return (__force __sum16)(~(__force u32)sum >> 16); -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - */ -static inline __sum16 -ip_fast_csum(const void *iph, unsigned int ihl) -{ - unsigned int tmp1; - __wsum sum; - - __asm__ __volatile__( - "ldr %0, [%1], #4 @ ip_fast_csum \n\ - ldr %3, [%1], #4 \n\ - sub %2, %2, #5 \n\ - adds %0, %0, %3 \n\ - ldr %3, [%1], #4 \n\ - adcs %0, %0, %3 \n\ - ldr %3, [%1], #4 \n\ -1: adcs %0, %0, %3 \n\ - ldr %3, [%1], #4 \n\ - tst %2, #15 @ do this carefully \n\ - subne %2, %2, #1 @ without destroying \n\ - bne 1b @ the carry flag \n\ - adcs %0, %0, %3 \n\ - adc %0, %0, #0" - : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1) - : "1" (iph), "2" (ihl) - : "cc", "memory"); - return csum_fold(sum); -} - -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - __asm__( - "adds %0, %1, %2 @ csum_tcpudp_nofold \n\ - adcs %0, %0, %3 \n" -#ifdef __ARMEB__ - "adcs %0, %0, %4 \n" -#else - "adcs %0, %0, %4, lsl #8 \n" -#endif - "adcs %0, %0, %5 \n\ - adc %0, %0, #0" - : "=&r"(sum) - : "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto)) - : "cc"); - return sum; -} -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); -} - - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -static inline __sum16 -ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -#define _HAVE_ARCH_IPV6_CSUM -extern __wsum -__csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __be32 len, - __be32 proto, __wsum sum); - -static inline __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len, - unsigned short proto, __wsum sum) -{ - return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len), - htonl(proto), sum)); -} -#endif diff --git a/include/asm-arm/cnt32_to_63.h b/include/asm-arm/cnt32_to_63.h deleted file mode 100644 index 480c873fa746..000000000000 --- a/include/asm-arm/cnt32_to_63.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits - * - * Author: Nicolas Pitre - * Created: December 3, 2006 - * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - */ - -#ifndef __INCLUDE_CNT32_TO_63_H__ -#define __INCLUDE_CNT32_TO_63_H__ - -#include -#include -#include - -/* - * Prototype: u64 cnt32_to_63(u32 cnt) - * Many hardware clock counters are only 32 bits wide and therefore have - * a relatively short period making wrap-arounds rather frequent. This - * is a problem when implementing sched_clock() for example, where a 64-bit - * non-wrapping monotonic value is expected to be returned. - * - * To overcome that limitation, let's extend a 32-bit counter to 63 bits - * in a completely lock free fashion. Bits 0 to 31 of the clock are provided - * by the hardware while bits 32 to 62 are stored in memory. The top bit in - * memory is used to synchronize with the hardware clock half-period. When - * the top bit of both counters (hardware and in memory) differ then the - * memory is updated with a new value, incrementing it when the hardware - * counter wraps around. - * - * Because a word store in memory is atomic then the incremented value will - * always be in synch with the top bit indicating to any potential concurrent - * reader if the value in memory is up to date or not with regards to the - * needed increment. And any race in updating the value in memory is harmless - * as the same value would simply be stored more than once. - * - * The only restriction for the algorithm to work properly is that this - * code must be executed at least once per each half period of the 32-bit - * counter to properly update the state bit in memory. This is usually not a - * problem in practice, but if it is then a kernel timer could be scheduled - * to manage for this code to be executed often enough. - * - * Note that the top bit (bit 63) in the returned value should be considered - * as garbage. It is not cleared here because callers are likely to use a - * multiplier on the returned value which can get rid of the top bit - * implicitly by making the multiplier even, therefore saving on a runtime - * clear-bit instruction. Otherwise caller must remember to clear the top - * bit explicitly. - */ - -/* this is used only to give gcc a clue about good code generation */ -typedef union { - struct { -#if defined(__LITTLE_ENDIAN) - u32 lo, hi; -#elif defined(__BIG_ENDIAN) - u32 hi, lo; -#endif - }; - u64 val; -} cnt32_to_63_t; - -#define cnt32_to_63(cnt_lo) \ -({ \ - static volatile u32 __m_cnt_hi = 0; \ - cnt32_to_63_t __x; \ - __x.hi = __m_cnt_hi; \ - __x.lo = (cnt_lo); \ - if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \ - __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \ - __x.val; \ -}) - -#endif diff --git a/include/asm-arm/cpu-multi32.h b/include/asm-arm/cpu-multi32.h deleted file mode 100644 index 3479de9266e5..000000000000 --- a/include/asm-arm/cpu-multi32.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * linux/include/asm-arm/cpu-multi32.h - * - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - -struct mm_struct; - -/* - * Don't change this structure - ASM code - * relies on it. - */ -extern struct processor { - /* MISC - * get data abort address/flags - */ - void (*_data_abort)(unsigned long pc); - /* - * Retrieve prefetch fault address - */ - unsigned long (*_prefetch_abort)(unsigned long lr); - /* - * Set up any processor specifics - */ - void (*_proc_init)(void); - /* - * Disable any processor specifics - */ - void (*_proc_fin)(void); - /* - * Special stuff for a reset - */ - void (*reset)(unsigned long addr) __attribute__((noreturn)); - /* - * Idle the processor - */ - int (*_do_idle)(void); - /* - * Processor architecture specific - */ - /* - * clean a virtual address range from the - * D-cache without flushing the cache. - */ - void (*dcache_clean_area)(void *addr, int size); - - /* - * Set the page table - */ - void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm); - /* - * Set a possibly extended PTE. Non-extended PTEs should - * ignore 'ext'. - */ - void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext); -} processor; - -#define cpu_proc_init() processor._proc_init() -#define cpu_proc_fin() processor._proc_fin() -#define cpu_reset(addr) processor.reset(addr) -#define cpu_do_idle() processor._do_idle() -#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz) -#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext) -#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm) diff --git a/include/asm-arm/cpu-single.h b/include/asm-arm/cpu-single.h deleted file mode 100644 index 0b120ee36091..000000000000 --- a/include/asm-arm/cpu-single.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * linux/include/asm-arm/cpu-single.h - * - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -/* - * Single CPU - */ -#ifdef __STDC__ -#define __catify_fn(name,x) name##x -#else -#define __catify_fn(name,x) name/**/x -#endif -#define __cpu_fn(name,x) __catify_fn(name,x) - -/* - * If we are supporting multiple CPUs, then we must use a table of - * function pointers for this lot. Otherwise, we can optimise the - * table away. - */ -#define cpu_proc_init __cpu_fn(CPU_NAME,_proc_init) -#define cpu_proc_fin __cpu_fn(CPU_NAME,_proc_fin) -#define cpu_reset __cpu_fn(CPU_NAME,_reset) -#define cpu_do_idle __cpu_fn(CPU_NAME,_do_idle) -#define cpu_dcache_clean_area __cpu_fn(CPU_NAME,_dcache_clean_area) -#define cpu_do_switch_mm __cpu_fn(CPU_NAME,_switch_mm) -#define cpu_set_pte_ext __cpu_fn(CPU_NAME,_set_pte_ext) - -#include - -struct mm_struct; - -/* declare all the functions as extern */ -extern void cpu_proc_init(void); -extern void cpu_proc_fin(void); -extern int cpu_do_idle(void); -extern void cpu_dcache_clean_area(void *, int); -extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); -extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); -extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); diff --git a/include/asm-arm/cpu.h b/include/asm-arm/cpu.h deleted file mode 100644 index 715426b9b08e..000000000000 --- a/include/asm-arm/cpu.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * linux/include/asm-arm/cpu.h - * - * Copyright (C) 2004-2005 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_CPU_H -#define __ASM_ARM_CPU_H - -#include - -struct cpuinfo_arm { - struct cpu cpu; -#ifdef CONFIG_SMP - struct task_struct *idle; - unsigned int loops_per_jiffy; -#endif -}; - -DECLARE_PER_CPU(struct cpuinfo_arm, cpu_data); - -#endif diff --git a/include/asm-arm/cputime.h b/include/asm-arm/cputime.h deleted file mode 100644 index 3a8002a5fec7..000000000000 --- a/include/asm-arm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARM_CPUTIME_H -#define __ARM_CPUTIME_H - -#include - -#endif /* __ARM_CPUTIME_H */ diff --git a/include/asm-arm/current.h b/include/asm-arm/current.h deleted file mode 100644 index 75d21e2a3ff7..000000000000 --- a/include/asm-arm/current.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _ASMARM_CURRENT_H -#define _ASMARM_CURRENT_H - -#include - -static inline struct task_struct *get_current(void) __attribute_const__; - -static inline struct task_struct *get_current(void) -{ - return current_thread_info()->task; -} - -#define current (get_current()) - -#endif /* _ASMARM_CURRENT_H */ diff --git a/include/asm-arm/delay.h b/include/asm-arm/delay.h deleted file mode 100644 index b2deda181549..000000000000 --- a/include/asm-arm/delay.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (C) 1995-2004 Russell King - * - * Delay routines, using a pre-computed "loops_per_second" value. - */ -#ifndef __ASM_ARM_DELAY_H -#define __ASM_ARM_DELAY_H - -#include /* HZ */ - -extern void __delay(int loops); - -/* - * This function intentionally does not exist; if you see references to - * it, it means that you're calling udelay() with an out of range value. - * - * With currently imposed limits, this means that we support a max delay - * of 2000us. Further limits: HZ<=1000 and bogomips<=3355 - */ -extern void __bad_udelay(void); - -/* - * division by multiplication: you don't have to worry about - * loss of precision. - * - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) - */ -extern void __udelay(unsigned long usecs); -extern void __const_udelay(unsigned long); - -#define MAX_UDELAY_MS 2 - -#define udelay(n) \ - (__builtin_constant_p(n) ? \ - ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \ - __const_udelay((n) * ((2199023U*HZ)>>11))) : \ - __udelay(n)) - -#endif /* defined(_ARM_DELAY_H) */ - diff --git a/include/asm-arm/device.h b/include/asm-arm/device.h deleted file mode 100644 index c61642b40603..000000000000 --- a/include/asm-arm/device.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#ifndef ASMARM_DEVICE_H -#define ASMARM_DEVICE_H - -struct dev_archdata { -#ifdef CONFIG_DMABOUNCE - struct dmabounce_device_info *dmabounce; -#endif -}; - -#endif diff --git a/include/asm-arm/div64.h b/include/asm-arm/div64.h deleted file mode 100644 index 5001390be958..000000000000 --- a/include/asm-arm/div64.h +++ /dev/null @@ -1,227 +0,0 @@ -#ifndef __ASM_ARM_DIV64 -#define __ASM_ARM_DIV64 - -#include -#include - -/* - * The semantics of do_div() are: - * - * uint32_t do_div(uint64_t *n, uint32_t base) - * { - * uint32_t remainder = *n % base; - * *n = *n / base; - * return remainder; - * } - * - * In other words, a 64-bit dividend with a 32-bit divisor producing - * a 64-bit result and a 32-bit remainder. To accomplish this optimally - * we call a special __do_div64 helper with completely non standard - * calling convention for arguments and results (beware). - */ - -#ifdef __ARMEB__ -#define __xh "r0" -#define __xl "r1" -#else -#define __xl "r0" -#define __xh "r1" -#endif - -#define __do_div_asm(n, base) \ -({ \ - register unsigned int __base asm("r4") = base; \ - register unsigned long long __n asm("r0") = n; \ - register unsigned long long __res asm("r2"); \ - register unsigned int __rem asm(__xh); \ - asm( __asmeq("%0", __xh) \ - __asmeq("%1", "r2") \ - __asmeq("%2", "r0") \ - __asmeq("%3", "r4") \ - "bl __do_div64" \ - : "=r" (__rem), "=r" (__res) \ - : "r" (__n), "r" (__base) \ - : "ip", "lr", "cc"); \ - n = __res; \ - __rem; \ -}) - -#if __GNUC__ < 4 - -/* - * gcc versions earlier than 4.0 are simply too problematic for the - * optimized implementation below. First there is gcc PR 15089 that - * tend to trig on more complex constructs, spurious .global __udivsi3 - * are inserted even if none of those symbols are referenced in the - * generated code, and those gcc versions are not able to do constant - * propagation on long long values anyway. - */ -#define do_div(n, base) __do_div_asm(n, base) - -#elif __GNUC__ >= 4 - -#include - -/* - * If the divisor happens to be constant, we determine the appropriate - * inverse at compile time to turn the division into a few inline - * multiplications instead which is much faster. And yet only if compiling - * for ARMv4 or higher (we need umull/umlal) and if the gcc version is - * sufficiently recent to perform proper long long constant propagation. - * (It is unfortunate that gcc doesn't perform all this internally.) - */ -#define do_div(n, base) \ -({ \ - unsigned int __r, __b = (base); \ - if (!__builtin_constant_p(__b) || __b == 0 || \ - (__LINUX_ARM_ARCH__ < 4 && (__b & (__b - 1)) != 0)) { \ - /* non-constant divisor (or zero): slow path */ \ - __r = __do_div_asm(n, __b); \ - } else if ((__b & (__b - 1)) == 0) { \ - /* Trivial: __b is constant and a power of 2 */ \ - /* gcc does the right thing with this code. */ \ - __r = n; \ - __r &= (__b - 1); \ - n /= __b; \ - } else { \ - /* Multiply by inverse of __b: n/b = n*(p/b)/p */ \ - /* We rely on the fact that most of this code gets */ \ - /* optimized away at compile time due to constant */ \ - /* propagation and only a couple inline assembly */ \ - /* instructions should remain. Better avoid any */ \ - /* code construct that might prevent that. */ \ - unsigned long long __res, __x, __t, __m, __n = n; \ - unsigned int __c, __p, __z = 0; \ - /* preserve low part of n for reminder computation */ \ - __r = __n; \ - /* determine number of bits to represent __b */ \ - __p = 1 << __div64_fls(__b); \ - /* compute __m = ((__p << 64) + __b - 1) / __b */ \ - __m = (~0ULL / __b) * __p; \ - __m += (((~0ULL % __b + 1) * __p) + __b - 1) / __b; \ - /* compute __res = __m*(~0ULL/__b*__b-1)/(__p << 64) */ \ - __x = ~0ULL / __b * __b - 1; \ - __res = (__m & 0xffffffff) * (__x & 0xffffffff); \ - __res >>= 32; \ - __res += (__m & 0xffffffff) * (__x >> 32); \ - __t = __res; \ - __res += (__x & 0xffffffff) * (__m >> 32); \ - __t = (__res < __t) ? (1ULL << 32) : 0; \ - __res = (__res >> 32) + __t; \ - __res += (__m >> 32) * (__x >> 32); \ - __res /= __p; \ - /* Now sanitize and optimize what we've got. */ \ - if (~0ULL % (__b / (__b & -__b)) == 0) { \ - /* those cases can be simplified with: */ \ - __n /= (__b & -__b); \ - __m = ~0ULL / (__b / (__b & -__b)); \ - __p = 1; \ - __c = 1; \ - } else if (__res != __x / __b) { \ - /* We can't get away without a correction */ \ - /* to compensate for bit truncation errors. */ \ - /* To avoid it we'd need an additional bit */ \ - /* to represent __m which would overflow it. */ \ - /* Instead we do m=p/b and n/b=(n*m+m)/p. */ \ - __c = 1; \ - /* Compute __m = (__p << 64) / __b */ \ - __m = (~0ULL / __b) * __p; \ - __m += ((~0ULL % __b + 1) * __p) / __b; \ - } else { \ - /* Reduce __m/__p, and try to clear bit 31 */ \ - /* of __m when possible otherwise that'll */ \ - /* need extra overflow handling later. */ \ - unsigned int __bits = -(__m & -__m); \ - __bits |= __m >> 32; \ - __bits = (~__bits) << 1; \ - /* If __bits == 0 then setting bit 31 is */ \ - /* unavoidable. Simply apply the maximum */ \ - /* possible reduction in that case. */ \ - /* Otherwise the MSB of __bits indicates the */ \ - /* best reduction we should apply. */ \ - if (!__bits) { \ - __p /= (__m & -__m); \ - __m /= (__m & -__m); \ - } else { \ - __p >>= __div64_fls(__bits); \ - __m >>= __div64_fls(__bits); \ - } \ - /* No correction needed. */ \ - __c = 0; \ - } \ - /* Now we have a combination of 2 conditions: */ \ - /* 1) whether or not we need a correction (__c), and */ \ - /* 2) whether or not there might be an overflow in */ \ - /* the cross product (__m & ((1<<63) | (1<<31))) */ \ - /* Select the best insn combination to perform the */ \ - /* actual __m * __n / (__p << 64) operation. */ \ - if (!__c) { \ - asm ( "umull %Q0, %R0, %1, %Q2\n\t" \ - "mov %Q0, #0" \ - : "=&r" (__res) \ - : "r" (__m), "r" (__n) \ - : "cc" ); \ - } else if (!(__m & ((1ULL << 63) | (1ULL << 31)))) { \ - __res = __m; \ - asm ( "umlal %Q0, %R0, %Q1, %Q2\n\t" \ - "mov %Q0, #0" \ - : "+r" (__res) \ - : "r" (__m), "r" (__n) \ - : "cc" ); \ - } else { \ - asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" \ - "cmn %Q0, %Q1\n\t" \ - "adcs %R0, %R0, %R1\n\t" \ - "adc %Q0, %3, #0" \ - : "=&r" (__res) \ - : "r" (__m), "r" (__n), "r" (__z) \ - : "cc" ); \ - } \ - if (!(__m & ((1ULL << 63) | (1ULL << 31)))) { \ - asm ( "umlal %R0, %Q0, %R1, %Q2\n\t" \ - "umlal %R0, %Q0, %Q1, %R2\n\t" \ - "mov %R0, #0\n\t" \ - "umlal %Q0, %R0, %R1, %R2" \ - : "+r" (__res) \ - : "r" (__m), "r" (__n) \ - : "cc" ); \ - } else { \ - asm ( "umlal %R0, %Q0, %R2, %Q3\n\t" \ - "umlal %R0, %1, %Q2, %R3\n\t" \ - "mov %R0, #0\n\t" \ - "adds %Q0, %1, %Q0\n\t" \ - "adc %R0, %R0, #0\n\t" \ - "umlal %Q0, %R0, %R2, %R3" \ - : "+r" (__res), "+r" (__z) \ - : "r" (__m), "r" (__n) \ - : "cc" ); \ - } \ - __res /= __p; \ - /* The reminder can be computed with 32-bit regs */ \ - /* only, and gcc is good at that. */ \ - { \ - unsigned int __res0 = __res; \ - unsigned int __b0 = __b; \ - __r -= __res0 * __b0; \ - } \ - /* BUG_ON(__r >= __b || __res * __b + __r != n); */ \ - n = __res; \ - } \ - __r; \ -}) - -/* our own fls implementation to make sure constant propagation is fine */ -#define __div64_fls(bits) \ -({ \ - unsigned int __left = (bits), __nr = 0; \ - if (__left & 0xffff0000) __nr += 16, __left >>= 16; \ - if (__left & 0x0000ff00) __nr += 8, __left >>= 8; \ - if (__left & 0x000000f0) __nr += 4, __left >>= 4; \ - if (__left & 0x0000000c) __nr += 2, __left >>= 2; \ - if (__left & 0x00000002) __nr += 1; \ - __nr; \ -}) - -#endif - -#endif diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h deleted file mode 100644 index f41335ba6337..000000000000 --- a/include/asm-arm/dma-mapping.h +++ /dev/null @@ -1,456 +0,0 @@ -#ifndef ASMARM_DMA_MAPPING_H -#define ASMARM_DMA_MAPPING_H - -#ifdef __KERNEL__ - -#include /* need struct page */ - -#include - -/* - * DMA-consistent mapping functions. These allocate/free a region of - * uncached, unwrite-buffered mapped memory space for use with DMA - * devices. This is the "generic" version. The PCI specific version - * is in pci.h - * - * Note: Drivers should NOT use this function directly, as it will break - * platforms with CONFIG_DMABOUNCE. - * Use the driver DMA support - see dma-mapping.h (dma_sync_*) - */ -extern void dma_cache_maint(const void *kaddr, size_t size, int rw); - -/* - * Return whether the given device DMA address mask can be supported - * properly. For example, if your device can only drive the low 24-bits - * during bus mastering, then you would pass 0x00ffffff as the mask - * to this function. - * - * FIXME: This should really be a platform specific issue - we should - * return false if GFP_DMA allocations may not satisfy the supplied 'mask'. - */ -static inline int dma_supported(struct device *dev, u64 mask) -{ - return dev->dma_mask && *dev->dma_mask != 0; -} - -static inline int dma_set_mask(struct device *dev, u64 dma_mask) -{ - if (!dev->dma_mask || !dma_supported(dev, dma_mask)) - return -EIO; - - *dev->dma_mask = dma_mask; - - return 0; -} - -static inline int dma_get_cache_alignment(void) -{ - return 32; -} - -static inline int dma_is_consistent(struct device *dev, dma_addr_t handle) -{ - return !!arch_is_coherent(); -} - -/* - * DMA errors are defined by all-bits-set in the DMA address. - */ -static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) -{ - return dma_addr == ~0; -} - -/* - * Dummy noncoherent implementation. We don't provide a dma_cache_sync - * function so drivers using this API are highlighted with build warnings. - */ -static inline void * -dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) -{ - return NULL; -} - -static inline void -dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t handle) -{ -} - -/** - * dma_alloc_coherent - allocate consistent memory for DMA - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @size: required memory size - * @handle: bus-specific DMA address - * - * Allocate some uncached, unbuffered memory for a device for - * performing DMA. This function allocates pages, and will - * return the CPU-viewed address, and sets @handle to be the - * device-viewed address. - */ -extern void * -dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp); - -/** - * dma_free_coherent - free memory allocated by dma_alloc_coherent - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @size: size of memory originally requested in dma_alloc_coherent - * @cpu_addr: CPU-view address returned from dma_alloc_coherent - * @handle: device-view address returned from dma_alloc_coherent - * - * Free (and unmap) a DMA buffer previously allocated by - * dma_alloc_coherent(). - * - * References to memory and mappings associated with cpu_addr/handle - * during and after this call executing are illegal. - */ -extern void -dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t handle); - -/** - * dma_mmap_coherent - map a coherent DMA allocation into user space - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @vma: vm_area_struct describing requested user mapping - * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent - * @handle: device-view address returned from dma_alloc_coherent - * @size: size of memory originally requested in dma_alloc_coherent - * - * Map a coherent DMA buffer previously allocated by dma_alloc_coherent - * into user space. The coherent DMA buffer must not be freed by the - * driver until the user space mapping has been released. - */ -int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma, - void *cpu_addr, dma_addr_t handle, size_t size); - - -/** - * dma_alloc_writecombine - allocate writecombining memory for DMA - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @size: required memory size - * @handle: bus-specific DMA address - * - * Allocate some uncached, buffered memory for a device for - * performing DMA. This function allocates pages, and will - * return the CPU-viewed address, and sets @handle to be the - * device-viewed address. - */ -extern void * -dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp); - -#define dma_free_writecombine(dev,size,cpu_addr,handle) \ - dma_free_coherent(dev,size,cpu_addr,handle) - -int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma, - void *cpu_addr, dma_addr_t handle, size_t size); - - -/** - * dma_map_single - map a single buffer for streaming DMA - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @cpu_addr: CPU direct mapped address of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction - * - * Ensure that any data held in the cache is appropriately discarded - * or written back. - * - * The device owns this memory once this call has completed. The CPU - * can regain ownership by calling dma_unmap_single() or - * dma_sync_single_for_cpu(). - */ -#ifndef CONFIG_DMABOUNCE -static inline dma_addr_t -dma_map_single(struct device *dev, void *cpu_addr, size_t size, - enum dma_data_direction dir) -{ - if (!arch_is_coherent()) - dma_cache_maint(cpu_addr, size, dir); - - return virt_to_dma(dev, (unsigned long)cpu_addr); -} -#else -extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction); -#endif - -/** - * dma_map_page - map a portion of a page for streaming DMA - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @page: page that buffer resides in - * @offset: offset into page for start of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction - * - * Ensure that any data held in the cache is appropriately discarded - * or written back. - * - * The device owns this memory once this call has completed. The CPU - * can regain ownership by calling dma_unmap_page() or - * dma_sync_single_for_cpu(). - */ -static inline dma_addr_t -dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction dir) -{ - return dma_map_single(dev, page_address(page) + offset, size, (int)dir); -} - -/** - * dma_unmap_single - unmap a single buffer previously mapped - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @handle: DMA address of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction - * - * Unmap a single streaming mode DMA translation. The handle and size - * must match what was provided in the previous dma_map_single() call. - * All other usages are undefined. - * - * After this call, reads by the CPU to the buffer are guaranteed to see - * whatever the device wrote there. - */ -#ifndef CONFIG_DMABOUNCE -static inline void -dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size, - enum dma_data_direction dir) -{ - /* nothing to do */ -} -#else -extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction); -#endif - -/** - * dma_unmap_page - unmap a buffer previously mapped through dma_map_page() - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @handle: DMA address of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction - * - * Unmap a single streaming mode DMA translation. The handle and size - * must match what was provided in the previous dma_map_single() call. - * All other usages are undefined. - * - * After this call, reads by the CPU to the buffer are guaranteed to see - * whatever the device wrote there. - */ -static inline void -dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size, - enum dma_data_direction dir) -{ - dma_unmap_single(dev, handle, size, (int)dir); -} - -/** - * dma_map_sg - map a set of SG buffers for streaming mode DMA - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @sg: list of buffers - * @nents: number of buffers to map - * @dir: DMA transfer direction - * - * Map a set of buffers described by scatterlist in streaming - * mode for DMA. This is the scatter-gather version of the - * above dma_map_single interface. Here the scatter gather list - * elements are each tagged with the appropriate dma address - * and length. They are obtained via sg_dma_{address,length}(SG). - * - * NOTE: An implementation may be able to use a smaller number of - * DMA address/length pairs than there are SG table elements. - * (for example via virtual mapping capabilities) - * The routine returns the number of addr/length pairs actually - * used, at most nents. - * - * Device ownership issues as mentioned above for dma_map_single are - * the same here. - */ -#ifndef CONFIG_DMABOUNCE -static inline int -dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction dir) -{ - int i; - - for (i = 0; i < nents; i++, sg++) { - char *virt; - - sg->dma_address = page_to_dma(dev, sg_page(sg)) + sg->offset; - virt = sg_virt(sg); - - if (!arch_is_coherent()) - dma_cache_maint(virt, sg->length, dir); - } - - return nents; -} -#else -extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction); -#endif - -/** - * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @sg: list of buffers - * @nents: number of buffers to map - * @dir: DMA transfer direction - * - * Unmap a set of streaming mode DMA translations. - * Again, CPU read rules concerning calls here are the same as for - * dma_unmap_single() above. - */ -#ifndef CONFIG_DMABOUNCE -static inline void -dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction dir) -{ - - /* nothing to do */ -} -#else -extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction); -#endif - - -/** - * dma_sync_single_for_cpu - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @handle: DMA address of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction - * - * Make physical memory consistent for a single streaming mode DMA - * translation after a transfer. - * - * If you perform a dma_map_single() but wish to interrogate the - * buffer using the cpu, yet do not wish to teardown the PCI dma - * mapping, you must call this function before doing so. At the - * next point you give the PCI dma address back to the card, you - * must first the perform a dma_sync_for_device, and then the - * device again owns the buffer. - */ -#ifndef CONFIG_DMABOUNCE -static inline void -dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, - enum dma_data_direction dir) -{ - if (!arch_is_coherent()) - dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir); -} - -static inline void -dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size, - enum dma_data_direction dir) -{ - if (!arch_is_coherent()) - dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir); -} -#else -extern void dma_sync_single_for_cpu(struct device*, dma_addr_t, size_t, enum dma_data_direction); -extern void dma_sync_single_for_device(struct device*, dma_addr_t, size_t, enum dma_data_direction); -#endif - - -/** - * dma_sync_sg_for_cpu - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @sg: list of buffers - * @nents: number of buffers to map - * @dir: DMA transfer direction - * - * Make physical memory consistent for a set of streaming - * mode DMA translations after a transfer. - * - * The same as dma_sync_single_for_* but for a scatter-gather list, - * same rules and usage. - */ -#ifndef CONFIG_DMABOUNCE -static inline void -dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction dir) -{ - int i; - - for (i = 0; i < nents; i++, sg++) { - char *virt = sg_virt(sg); - if (!arch_is_coherent()) - dma_cache_maint(virt, sg->length, dir); - } -} - -static inline void -dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction dir) -{ - int i; - - for (i = 0; i < nents; i++, sg++) { - char *virt = sg_virt(sg); - if (!arch_is_coherent()) - dma_cache_maint(virt, sg->length, dir); - } -} -#else -extern void dma_sync_sg_for_cpu(struct device*, struct scatterlist*, int, enum dma_data_direction); -extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enum dma_data_direction); -#endif - -#ifdef CONFIG_DMABOUNCE -/* - * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic" - * and utilize bounce buffers as needed to work around limited DMA windows. - * - * On the SA-1111, a bug limits DMA to only certain regions of RAM. - * On the IXP425, the PCI inbound window is 64MB (256MB total RAM) - * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM) - * - * The following are helper functions used by the dmabounce subystem - * - */ - -/** - * dmabounce_register_dev - * - * @dev: valid struct device pointer - * @small_buf_size: size of buffers to use with small buffer pool - * @large_buf_size: size of buffers to use with large buffer pool (can be 0) - * - * This function should be called by low-level platform code to register - * a device as requireing DMA buffer bouncing. The function will allocate - * appropriate DMA pools for the device. - * - */ -extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long); - -/** - * dmabounce_unregister_dev - * - * @dev: valid struct device pointer - * - * This function should be called by low-level platform code when device - * that was previously registered with dmabounce_register_dev is removed - * from the system. - * - */ -extern void dmabounce_unregister_dev(struct device *); - -/** - * dma_needs_bounce - * - * @dev: valid struct device pointer - * @dma_handle: dma_handle of unbounced buffer - * @size: size of region being mapped - * - * Platforms that utilize the dmabounce mechanism must implement - * this function. - * - * The dmabounce routines call this function whenever a dma-mapping - * is requested to determine whether a given buffer needs to be bounced - * or not. The function must return 0 if the buffer is OK for - * DMA access and 1 if the buffer needs to be bounced. - * - */ -extern int dma_needs_bounce(struct device*, dma_addr_t, size_t); -#endif /* CONFIG_DMABOUNCE */ - -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-arm/dma.h b/include/asm-arm/dma.h deleted file mode 100644 index 9f2c5305c260..000000000000 --- a/include/asm-arm/dma.h +++ /dev/null @@ -1,143 +0,0 @@ -#ifndef __ASM_ARM_DMA_H -#define __ASM_ARM_DMA_H - -typedef unsigned int dmach_t; - -#include -#include -#include -#include - -/* - * This is the maximum virtual address which can be DMA'd from. - */ -#ifndef MAX_DMA_ADDRESS -#define MAX_DMA_ADDRESS 0xffffffff -#endif - -/* - * DMA modes - */ -typedef unsigned int dmamode_t; - -#define DMA_MODE_MASK 3 - -#define DMA_MODE_READ 0 -#define DMA_MODE_WRITE 1 -#define DMA_MODE_CASCADE 2 -#define DMA_AUTOINIT 4 - -extern spinlock_t dma_spin_lock; - -static inline unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static inline void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - */ -#define clear_dma_ff(channel) - -/* Set only the page register bits of the transfer address. - * - * NOTE: This is an architecture specific function, and should - * be hidden from the drivers - */ -extern void set_dma_page(dmach_t channel, char pagenr); - -/* Request a DMA channel - * - * Some architectures may need to do allocate an interrupt - */ -extern int request_dma(dmach_t channel, const char * device_id); - -/* Free a DMA channel - * - * Some architectures may need to do free an interrupt - */ -extern void free_dma(dmach_t channel); - -/* Enable DMA for this channel - * - * On some architectures, this may have other side effects like - * enabling an interrupt and setting the DMA registers. - */ -extern void enable_dma(dmach_t channel); - -/* Disable DMA for this channel - * - * On some architectures, this may have other side effects like - * disabling an interrupt or whatever. - */ -extern void disable_dma(dmach_t channel); - -/* Test whether the specified channel has an active DMA transfer - */ -extern int dma_channel_active(dmach_t channel); - -/* Set the DMA scatter gather list for this channel - * - * This should not be called if a DMA channel is enabled, - * especially since some DMA architectures don't update the - * DMA address immediately, but defer it to the enable_dma(). - */ -extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg); - -/* Set the DMA address for this channel - * - * This should not be called if a DMA channel is enabled, - * especially since some DMA architectures don't update the - * DMA address immediately, but defer it to the enable_dma(). - */ -extern void __set_dma_addr(dmach_t channel, void *addr); -#define set_dma_addr(channel, addr) \ - __set_dma_addr(channel, bus_to_virt(addr)) - -/* Set the DMA byte count for this channel - * - * This should not be called if a DMA channel is enabled, - * especially since some DMA architectures don't update the - * DMA count immediately, but defer it to the enable_dma(). - */ -extern void set_dma_count(dmach_t channel, unsigned long count); - -/* Set the transfer direction for this channel - * - * This should not be called if a DMA channel is enabled, - * especially since some DMA architectures don't update the - * DMA transfer direction immediately, but defer it to the - * enable_dma(). - */ -extern void set_dma_mode(dmach_t channel, dmamode_t mode); - -/* Set the transfer speed for this channel - */ -extern void set_dma_speed(dmach_t channel, int cycle_ns); - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - */ -extern int get_dma_residue(dmach_t channel); - -#ifndef NO_DMA -#define NO_DMA 255 -#endif - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* _ARM_DMA_H */ diff --git a/include/asm-arm/domain.h b/include/asm-arm/domain.h deleted file mode 100644 index 3c12a7625304..000000000000 --- a/include/asm-arm/domain.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * linux/include/asm-arm/domain.h - * - * Copyright (C) 1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_PROC_DOMAIN_H -#define __ASM_PROC_DOMAIN_H - -/* - * Domain numbers - * - * DOMAIN_IO - domain 2 includes all IO only - * DOMAIN_USER - domain 1 includes all user memory only - * DOMAIN_KERNEL - domain 0 includes all kernel memory only - * - * The domain numbering depends on whether we support 36 physical - * address for I/O or not. Addresses above the 32 bit boundary can - * only be mapped using supersections and supersections can only - * be set for domain 0. We could just default to DOMAIN_IO as zero, - * but there may be systems with supersection support and no 36-bit - * addressing. In such cases, we want to map system memory with - * supersections to reduce TLB misses and footprint. - * - * 36-bit addressing and supersections are only available on - * CPUs based on ARMv6+ or the Intel XSC3 core. - */ -#ifndef CONFIG_IO_36 -#define DOMAIN_KERNEL 0 -#define DOMAIN_TABLE 0 -#define DOMAIN_USER 1 -#define DOMAIN_IO 2 -#else -#define DOMAIN_KERNEL 2 -#define DOMAIN_TABLE 2 -#define DOMAIN_USER 1 -#define DOMAIN_IO 0 -#endif - -/* - * Domain types - */ -#define DOMAIN_NOACCESS 0 -#define DOMAIN_CLIENT 1 -#define DOMAIN_MANAGER 3 - -#define domain_val(dom,type) ((type) << (2*(dom))) - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_MMU -#define set_domain(x) \ - do { \ - __asm__ __volatile__( \ - "mcr p15, 0, %0, c3, c0 @ set domain" \ - : : "r" (x)); \ - isb(); \ - } while (0) - -#define modify_domain(dom,type) \ - do { \ - struct thread_info *thread = current_thread_info(); \ - unsigned int domain = thread->cpu_domain; \ - domain &= ~domain_val(dom, DOMAIN_MANAGER); \ - thread->cpu_domain = domain | domain_val(dom, type); \ - set_domain(thread->cpu_domain); \ - } while (0) - -#else -#define set_domain(x) do { } while (0) -#define modify_domain(dom,type) do { } while (0) -#endif - -#endif -#endif /* !__ASSEMBLY__ */ diff --git a/include/asm-arm/ecard.h b/include/asm-arm/ecard.h deleted file mode 100644 index 5e22881a630d..000000000000 --- a/include/asm-arm/ecard.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - * linux/include/asm-arm/ecard.h - * - * definitions for expansion cards - * - * This is a new system as from Linux 1.2.3 - * - * Changelog: - * 11-12-1996 RMK Further minor improvements - * 12-09-1997 RMK Added interrupt enable/disable for card level - * - * Reference: Acorns Risc OS 3 Programmers Reference Manuals. - */ - -#ifndef __ASM_ECARD_H -#define __ASM_ECARD_H - -/* - * Currently understood cards (but not necessarily - * supported): - * Manufacturer Product ID - */ -#define MANU_ACORN 0x0000 -#define PROD_ACORN_SCSI 0x0002 -#define PROD_ACORN_ETHER1 0x0003 -#define PROD_ACORN_MFM 0x000b - -#define MANU_ANT2 0x0011 -#define PROD_ANT_ETHER3 0x00a4 - -#define MANU_ATOMWIDE 0x0017 -#define PROD_ATOMWIDE_3PSERIAL 0x0090 - -#define MANU_IRLAM_INSTRUMENTS 0x001f -#define MANU_IRLAM_INSTRUMENTS_ETHERN 0x5678 - -#define MANU_OAK 0x0021 -#define PROD_OAK_SCSI 0x0058 - -#define MANU_MORLEY 0x002b -#define PROD_MORLEY_SCSI_UNCACHED 0x0067 - -#define MANU_CUMANA 0x003a -#define PROD_CUMANA_SCSI_2 0x003a -#define PROD_CUMANA_SCSI_1 0x00a0 - -#define MANU_ICS 0x003c -#define PROD_ICS_IDE 0x00ae - -#define MANU_ICS2 0x003d -#define PROD_ICS2_IDE 0x00ae - -#define MANU_SERPORT 0x003f -#define PROD_SERPORT_DSPORT 0x00b9 - -#define MANU_ARXE 0x0041 -#define PROD_ARXE_SCSI 0x00be - -#define MANU_I3 0x0046 -#define PROD_I3_ETHERLAN500 0x00d4 -#define PROD_I3_ETHERLAN600 0x00ec -#define PROD_I3_ETHERLAN600A 0x011e - -#define MANU_ANT 0x0053 -#define PROD_ANT_ETHERM 0x00d8 -#define PROD_ANT_ETHERB 0x00e4 - -#define MANU_ALSYSTEMS 0x005b -#define PROD_ALSYS_SCSIATAPI 0x0107 - -#define MANU_MCS 0x0063 -#define PROD_MCS_CONNECT32 0x0125 - -#define MANU_EESOX 0x0064 -#define PROD_EESOX_SCSI2 0x008c - -#define MANU_YELLOWSTONE 0x0096 -#define PROD_YELLOWSTONE_RAPIDE32 0x0120 - -#ifdef ECARD_C -#define CONST -#else -#define CONST const -#endif - -#define MAX_ECARDS 9 - -struct ecard_id { /* Card ID structure */ - unsigned short manufacturer; - unsigned short product; - void *data; -}; - -struct in_ecid { /* Packed card ID information */ - unsigned short product; /* Product code */ - unsigned short manufacturer; /* Manufacturer code */ - unsigned char id:4; /* Simple ID */ - unsigned char cd:1; /* Chunk dir present */ - unsigned char is:1; /* Interrupt status pointers */ - unsigned char w:2; /* Width */ - unsigned char country; /* Country */ - unsigned char irqmask; /* IRQ mask */ - unsigned char fiqmask; /* FIQ mask */ - unsigned long irqoff; /* IRQ offset */ - unsigned long fiqoff; /* FIQ offset */ -}; - -typedef struct expansion_card ecard_t; -typedef unsigned long *loader_t; - -typedef struct expansion_card_ops { /* Card handler routines */ - void (*irqenable)(ecard_t *ec, int irqnr); - void (*irqdisable)(ecard_t *ec, int irqnr); - int (*irqpending)(ecard_t *ec); - void (*fiqenable)(ecard_t *ec, int fiqnr); - void (*fiqdisable)(ecard_t *ec, int fiqnr); - int (*fiqpending)(ecard_t *ec); -} expansioncard_ops_t; - -#define ECARD_NUM_RESOURCES (6) - -#define ECARD_RES_IOCSLOW (0) -#define ECARD_RES_IOCMEDIUM (1) -#define ECARD_RES_IOCFAST (2) -#define ECARD_RES_IOCSYNC (3) -#define ECARD_RES_MEMC (4) -#define ECARD_RES_EASI (5) - -#define ecard_resource_start(ec,nr) ((ec)->resource[nr].start) -#define ecard_resource_end(ec,nr) ((ec)->resource[nr].end) -#define ecard_resource_len(ec,nr) ((ec)->resource[nr].end - \ - (ec)->resource[nr].start + 1) -#define ecard_resource_flags(ec,nr) ((ec)->resource[nr].flags) - -/* - * This contains all the info needed on an expansion card - */ -struct expansion_card { - struct expansion_card *next; - - struct device dev; - struct resource resource[ECARD_NUM_RESOURCES]; - - /* Public data */ - void __iomem *irqaddr; /* address of IRQ register */ - void __iomem *fiqaddr; /* address of FIQ register */ - unsigned char irqmask; /* IRQ mask */ - unsigned char fiqmask; /* FIQ mask */ - unsigned char claimed; /* Card claimed? */ - unsigned char easi; /* EASI card */ - - void *irq_data; /* Data for use for IRQ by card */ - void *fiq_data; /* Data for use for FIQ by card */ - const expansioncard_ops_t *ops; /* Enable/Disable Ops for card */ - - CONST unsigned int slot_no; /* Slot number */ - CONST unsigned int dma; /* DMA number (for request_dma) */ - CONST unsigned int irq; /* IRQ number (for request_irq) */ - CONST unsigned int fiq; /* FIQ number (for request_irq) */ - CONST struct in_ecid cid; /* Card Identification */ - - /* Private internal data */ - const char *card_desc; /* Card description */ - CONST unsigned int podaddr; /* Base Linux address for card */ - CONST loader_t loader; /* loader program */ - u64 dma_mask; -}; - -void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data); - -struct in_chunk_dir { - unsigned int start_offset; - union { - unsigned char string[256]; - unsigned char data[1]; - } d; -}; - -/* - * Read a chunk from an expansion card - * cd : where to put read data - * ec : expansion card info struct - * id : id number to find - * num: (n+1)'th id to find. - */ -extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num); - -/* - * Request and release ecard resources - */ -extern int ecard_request_resources(struct expansion_card *ec); -extern void ecard_release_resources(struct expansion_card *ec); - -void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res, - unsigned long offset, unsigned long maxsize); -#define ecardm_iounmap(__ec, __addr) devm_iounmap(&(__ec)->dev, __addr) - -extern struct bus_type ecard_bus_type; - -#define ECARD_DEV(_d) container_of((_d), struct expansion_card, dev) - -struct ecard_driver { - int (*probe)(struct expansion_card *, const struct ecard_id *id); - void (*remove)(struct expansion_card *); - void (*shutdown)(struct expansion_card *); - const struct ecard_id *id_table; - unsigned int id; - struct device_driver drv; -}; - -#define ECARD_DRV(_d) container_of((_d), struct ecard_driver, drv) - -#define ecard_set_drvdata(ec,data) dev_set_drvdata(&(ec)->dev, (data)) -#define ecard_get_drvdata(ec) dev_get_drvdata(&(ec)->dev) - -int ecard_register_driver(struct ecard_driver *); -void ecard_remove_driver(struct ecard_driver *); - -#endif diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h deleted file mode 100644 index 4ca751627489..000000000000 --- a/include/asm-arm/elf.h +++ /dev/null @@ -1,116 +0,0 @@ -#ifndef __ASMARM_ELF_H -#define __ASMARM_ELF_H - -#include - -#ifndef __ASSEMBLY__ -/* - * ELF register definitions.. - */ -#include -#include - -typedef unsigned long elf_greg_t; -typedef unsigned long elf_freg_t[3]; - -#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct user_fp elf_fpregset_t; -#endif - -#define EM_ARM 40 -#define EF_ARM_APCS26 0x08 -#define EF_ARM_SOFT_FLOAT 0x200 -#define EF_ARM_EABI_MASK 0xFF000000 - -#define R_ARM_NONE 0 -#define R_ARM_PC24 1 -#define R_ARM_ABS32 2 -#define R_ARM_CALL 28 -#define R_ARM_JUMP24 29 - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#ifdef __ARMEB__ -#define ELF_DATA ELFDATA2MSB -#else -#define ELF_DATA ELFDATA2LSB -#endif -#define ELF_ARCH EM_ARM - -#ifndef __ASSEMBLY__ -/* - * This yields a string that ld.so will use to load implementation - * specific libraries for optimization. This is more specific in - * intent than poking at uname or /proc/cpuinfo. - * - * For now we just provide a fairly general string that describes the - * processor family. This could be made more specific later if someone - * implemented optimisations that require it. 26-bit CPUs give you - * "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't - * supported). 32-bit CPUs give you "v3[lb]" for anything based on an - * ARM6 or ARM7 core and "armv4[lb]" for anything based on a StrongARM-1 - * core. - */ -#define ELF_PLATFORM_SIZE 8 -#define ELF_PLATFORM (elf_platform) - -extern char elf_platform[]; -#endif - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ((x)->e_machine == EM_ARM && ELF_PROC_OK(x)) - -/* - * 32-bit code is always OK. Some cpus can do 26-bit, some can't. - */ -#define ELF_PROC_OK(x) (ELF_THUMB_OK(x) && ELF_26BIT_OK(x)) - -#define ELF_THUMB_OK(x) \ - ((elf_hwcap & HWCAP_THUMB && ((x)->e_entry & 1) == 1) || \ - ((x)->e_entry & 3) == 0) - -#define ELF_26BIT_OK(x) \ - ((elf_hwcap & HWCAP_26BIT && (x)->e_flags & EF_ARM_APCS26) || \ - ((x)->e_flags & EF_ARM_APCS26) == 0) - -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE 4096 - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) - -/* When the program starts, a1 contains a pointer to a function to be - registered with atexit, as per the SVR4 ABI. A value of 0 means we - have no such handler. */ -#define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0 - -/* - * Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0 - * and CP1, we only enable access to the iWMMXt coprocessor if the - * binary is EABI or softfloat (and thus, guaranteed not to use - * FPA instructions.) - */ -#define SET_PERSONALITY(ex, ibcs2) \ - do { \ - if ((ex).e_flags & EF_ARM_APCS26) { \ - set_personality(PER_LINUX); \ - } else { \ - set_personality(PER_LINUX_32BIT); \ - if (elf_hwcap & HWCAP_IWMMXT && (ex).e_flags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) \ - set_thread_flag(TIF_USING_IWMMXT); \ - else \ - clear_thread_flag(TIF_USING_IWMMXT); \ - } \ - } while (0) - -#endif diff --git a/include/asm-arm/emergency-restart.h b/include/asm-arm/emergency-restart.h deleted file mode 100644 index 108d8c48e42e..000000000000 --- a/include/asm-arm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-arm/errno.h b/include/asm-arm/errno.h deleted file mode 100644 index 6e60f0612bb6..000000000000 --- a/include/asm-arm/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ARM_ERRNO_H -#define _ARM_ERRNO_H - -#include - -#endif diff --git a/include/asm-arm/fb.h b/include/asm-arm/fb.h deleted file mode 100644 index d92e99cd8c8a..000000000000 --- a/include/asm-arm/fb.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ - -#include -#include -#include - -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); -} - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-arm/fcntl.h b/include/asm-arm/fcntl.h deleted file mode 100644 index a80b6607b2ef..000000000000 --- a/include/asm-arm/fcntl.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _ARM_FCNTL_H -#define _ARM_FCNTL_H - -#define O_DIRECTORY 040000 /* must be a directory */ -#define O_NOFOLLOW 0100000 /* don't follow links */ -#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ -#define O_LARGEFILE 0400000 - -#include - -#endif diff --git a/include/asm-arm/fiq.h b/include/asm-arm/fiq.h deleted file mode 100644 index a3bad09e825c..000000000000 --- a/include/asm-arm/fiq.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * linux/include/asm-arm/fiq.h - * - * Support for FIQ on ARM architectures. - * Written by Philip Blundell , 1998 - * Re-written by Russell King - */ - -#ifndef __ASM_FIQ_H -#define __ASM_FIQ_H - -#include - -struct fiq_handler { - struct fiq_handler *next; - /* Name - */ - const char *name; - /* Called to ask driver to relinquish/ - * reacquire FIQ - * return zero to accept, or - - */ - int (*fiq_op)(void *, int relinquish); - /* data for the relinquish/reacquire functions - */ - void *dev_id; -}; - -extern int claim_fiq(struct fiq_handler *f); -extern void release_fiq(struct fiq_handler *f); -extern void set_fiq_handler(void *start, unsigned int length); -extern void set_fiq_regs(struct pt_regs *regs); -extern void get_fiq_regs(struct pt_regs *regs); -extern void enable_fiq(int fiq); -extern void disable_fiq(int fiq); - -#endif diff --git a/include/asm-arm/flat.h b/include/asm-arm/flat.h deleted file mode 100644 index 9918aa46d9e5..000000000000 --- a/include/asm-arm/flat.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-arm/flat.h -- uClinux flat-format executables - */ - -#ifndef __ARM_FLAT_H__ -#define __ARM_FLAT_H__ - -/* An odd number of words will be pushed after this alignment, so - deliberately misalign the value. */ -#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4) -#define flat_argvp_envp_on_stack() 1 -#define flat_old_ram_flag(flags) (flags) -#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp) -#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) -#define flat_get_relocate_addr(rel) (rel) -#define flat_set_persistent(relval, p) 0 - -#endif /* __ARM_FLAT_H__ */ diff --git a/include/asm-arm/floppy.h b/include/asm-arm/floppy.h deleted file mode 100644 index 41a5e9d6bb69..000000000000 --- a/include/asm-arm/floppy.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * linux/include/asm-arm/floppy.h - * - * Copyright (C) 1996-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here - */ -#ifndef __ASM_ARM_FLOPPY_H -#define __ASM_ARM_FLOPPY_H -#if 0 -#include -#endif - -#define fd_outb(val,port) \ - do { \ - if ((port) == FD_DOR) \ - fd_setdor((val)); \ - else \ - outb((val),(port)); \ - } while(0) - -#define fd_inb(port) inb((port)) -#define fd_request_irq() request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\ - IRQF_DISABLED,"floppy",NULL) -#define fd_free_irq() free_irq(IRQ_FLOPPYDISK,NULL) -#define fd_disable_irq() disable_irq(IRQ_FLOPPYDISK) -#define fd_enable_irq() enable_irq(IRQ_FLOPPYDISK) - -static inline int fd_dma_setup(void *data, unsigned int length, - unsigned int mode, unsigned long addr) -{ - set_dma_mode(DMA_FLOPPY, mode); - __set_dma_addr(DMA_FLOPPY, data); - set_dma_count(DMA_FLOPPY, length); - virtual_dma_port = addr; - enable_dma(DMA_FLOPPY); - return 0; -} -#define fd_dma_setup fd_dma_setup - -#define fd_request_dma() request_dma(DMA_FLOPPY,"floppy") -#define fd_free_dma() free_dma(DMA_FLOPPY) -#define fd_disable_dma() disable_dma(DMA_FLOPPY) - -/* need to clean up dma.h */ -#define DMA_FLOPPYDISK DMA_FLOPPY - -/* Floppy_selects is the list of DOR's to select drive fd - * - * On initialisation, the floppy list is scanned, and the drives allocated - * in the order that they are found. This is done by seeking the drive - * to a non-zero track, and then restoring it to track 0. If an error occurs, - * then there is no floppy drive present. [to be put back in again] - */ -static unsigned char floppy_selects[2][4] = -{ - { 0x10, 0x21, 0x23, 0x33 }, - { 0x10, 0x21, 0x23, 0x33 } -}; - -#define fd_setdor(dor) \ -do { \ - int new_dor = (dor); \ - if (new_dor & 0xf0) \ - new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3]; \ - else \ - new_dor &= 0x0c; \ - outb(new_dor, FD_DOR); \ -} while (0) - -/* - * Someday, we'll automatically detect which drives are present... - */ -static inline void fd_scandrives (void) -{ -#if 0 - int floppy, drive_count; - - fd_disable_irq(); - raw_cmd = &default_raw_cmd; - raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK; - raw_cmd->track = 0; - raw_cmd->rate = ?; - drive_count = 0; - for (floppy = 0; floppy < 4; floppy ++) { - current_drive = drive_count; - /* - * Turn on floppy motor - */ - if (start_motor(redo_fd_request)) - continue; - /* - * Set up FDC - */ - fdc_specify(); - /* - * Tell FDC to recalibrate - */ - output_byte(FD_RECALIBRATE); - LAST_OUT(UNIT(floppy)); - /* wait for command to complete */ - if (!successful) { - int i; - for (i = drive_count; i < 3; i--) - floppy_selects[fdc][i] = floppy_selects[fdc][i + 1]; - floppy_selects[fdc][3] = 0; - floppy -= 1; - } else - drive_count++; - } -#else - floppy_selects[0][0] = 0x10; - floppy_selects[0][1] = 0x21; - floppy_selects[0][2] = 0x23; - floppy_selects[0][3] = 0x33; -#endif -} - -#define FDC1 (0x3f0) - -#define FLOPPY0_TYPE 4 -#define FLOPPY1_TYPE 4 - -#define N_FDC 1 -#define N_DRIVE 4 - -#define CROSS_64KB(a,s) (0) - -/* - * This allows people to reverse the order of - * fd0 and fd1, in case their hardware is - * strangely connected (as some RiscPCs - * and A5000s seem to be). - */ -static void driveswap(int *ints, int dummy, int dummy2) -{ - floppy_selects[0][0] ^= floppy_selects[0][1]; - floppy_selects[0][1] ^= floppy_selects[0][0]; - floppy_selects[0][0] ^= floppy_selects[0][1]; -} - -#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 } - -#endif diff --git a/include/asm-arm/fpstate.h b/include/asm-arm/fpstate.h deleted file mode 100644 index 392eb5332323..000000000000 --- a/include/asm-arm/fpstate.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * linux/include/asm-arm/fpstate.h - * - * Copyright (C) 1995 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_FPSTATE_H -#define __ASM_ARM_FPSTATE_H - - -#ifndef __ASSEMBLY__ - -/* - * VFP storage area has: - * - FPEXC, FPSCR, FPINST and FPINST2. - * - 16 or 32 double precision data registers - * - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6) - * - * FPEXC will always be non-zero once the VFP has been used in this process. - */ - -struct vfp_hard_struct { -#ifdef CONFIG_VFPv3 - __u64 fpregs[32]; -#else - __u64 fpregs[16]; -#endif -#if __LINUX_ARM_ARCH__ < 6 - __u32 fpmx_state; -#endif - __u32 fpexc; - __u32 fpscr; - /* - * VFP implementation specific state - */ - __u32 fpinst; - __u32 fpinst2; - -#ifdef CONFIG_SMP - __u32 cpu; -#endif -}; - -union vfp_state { - struct vfp_hard_struct hard; -}; - -extern void vfp_flush_thread(union vfp_state *); -extern void vfp_release_thread(union vfp_state *); - -#define FP_HARD_SIZE 35 - -struct fp_hard_struct { - unsigned int save[FP_HARD_SIZE]; /* as yet undefined */ -}; - -#define FP_SOFT_SIZE 35 - -struct fp_soft_struct { - unsigned int save[FP_SOFT_SIZE]; /* undefined information */ -}; - -#define IWMMXT_SIZE 0x98 - -struct iwmmxt_struct { - unsigned int save[IWMMXT_SIZE / sizeof(unsigned int)]; -}; - -union fp_state { - struct fp_hard_struct hard; - struct fp_soft_struct soft; -#ifdef CONFIG_IWMMXT - struct iwmmxt_struct iwmmxt; -#endif -}; - -#define FP_SIZE (sizeof(union fp_state) / sizeof(int)) - -struct crunch_state { - unsigned int mvdx[16][2]; - unsigned int mvax[4][3]; - unsigned int dspsc[2]; -}; - -#define CRUNCH_SIZE sizeof(struct crunch_state) - -#endif - -#endif diff --git a/include/asm-arm/ftrace.h b/include/asm-arm/ftrace.h deleted file mode 100644 index 584ef9a8e5a5..000000000000 --- a/include/asm-arm/ftrace.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _ASM_ARM_FTRACE -#define _ASM_ARM_FTRACE - -#ifdef CONFIG_FTRACE -#define MCOUNT_ADDR ((long)(mcount)) -#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ - -#ifndef __ASSEMBLY__ -extern void mcount(void); -#endif - -#endif - -#endif /* _ASM_ARM_FTRACE */ diff --git a/include/asm-arm/futex.h b/include/asm-arm/futex.h deleted file mode 100644 index 6a332a9f099c..000000000000 --- a/include/asm-arm/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include - -#endif diff --git a/include/asm-arm/glue.h b/include/asm-arm/glue.h deleted file mode 100644 index a97a182ba287..000000000000 --- a/include/asm-arm/glue.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * linux/include/asm-arm/glue.h - * - * Copyright (C) 1997-1999 Russell King - * Copyright (C) 2000-2002 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file provides the glue to stick the processor-specific bits - * into the kernel in an efficient manner. The idea is to use branches - * when we're only targetting one class of TLB, or indirect calls - * when we're targetting multiple classes of TLBs. - */ -#ifdef __KERNEL__ - - -#ifdef __STDC__ -#define ____glue(name,fn) name##fn -#else -#define ____glue(name,fn) name/**/fn -#endif -#define __glue(name,fn) ____glue(name,fn) - - - -/* - * Data Abort Model - * ================ - * - * We have the following to choose from: - * arm6 - ARM6 style - * arm7 - ARM7 style - * v4_early - ARMv4 without Thumb early abort handler - * v4t_late - ARMv4 with Thumb late abort handler - * v4t_early - ARMv4 with Thumb early abort handler - * v5tej_early - ARMv5 with Thumb and Java early abort handler - * xscale - ARMv5 with Thumb with Xscale extensions - * v6_early - ARMv6 generic early abort handler - * v7_early - ARMv7 generic early abort handler - */ -#undef CPU_DABORT_HANDLER -#undef MULTI_DABORT - -#if defined(CONFIG_CPU_ARM610) -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER cpu_arm6_data_abort -# endif -#endif - -#if defined(CONFIG_CPU_ARM710) -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER cpu_arm7_data_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_LV4T -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v4t_late_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV4 -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v4_early_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV4T -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v4t_early_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV5TJ -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v5tj_early_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV5T -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v5t_early_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV6 -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v6_early_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV7 -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v7_early_abort -# endif -#endif - -#ifndef CPU_DABORT_HANDLER -#error Unknown data abort handler type -#endif - -/* - * Prefetch abort handler. If the CPU has an IFAR use that, otherwise - * use the address of the aborted instruction - */ -#undef CPU_PABORT_HANDLER -#undef MULTI_PABORT - -#ifdef CONFIG_CPU_PABRT_IFAR -# ifdef CPU_PABORT_HANDLER -# define MULTI_PABORT 1 -# else -# define CPU_PABORT_HANDLER(reg, insn) mrc p15, 0, reg, cr6, cr0, 2 -# endif -#endif - -#ifdef CONFIG_CPU_PABRT_NOIFAR -# ifdef CPU_PABORT_HANDLER -# define MULTI_PABORT 1 -# else -# define CPU_PABORT_HANDLER(reg, insn) mov reg, insn -# endif -#endif - -#ifndef CPU_PABORT_HANDLER -#error Unknown prefetch abort handler type -#endif - -#endif diff --git a/include/asm-arm/gpio.h b/include/asm-arm/gpio.h deleted file mode 100644 index fff4f800ee42..000000000000 --- a/include/asm-arm/gpio.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _ARCH_ARM_GPIO_H -#define _ARCH_ARM_GPIO_H - -/* not all ARM platforms necessarily support this API ... */ -#include - -#endif /* _ARCH_ARM_GPIO_H */ diff --git a/include/asm-arm/hardirq.h b/include/asm-arm/hardirq.h deleted file mode 100644 index 182310b99195..000000000000 --- a/include/asm-arm/hardirq.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef __ASM_HARDIRQ_H -#define __ASM_HARDIRQ_H - -#include -#include -#include - -typedef struct { - unsigned int __softirq_pending; - unsigned int local_timer_irqs; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -#if NR_IRQS > 256 -#define HARDIRQ_BITS 9 -#else -#define HARDIRQ_BITS 8 -#endif - -/* - * The hardirq mask has to be large enough to have space - * for potentially all IRQ sources in the system nesting - * on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -#define __ARCH_IRQ_EXIT_IRQS_DISABLED 1 - -#endif /* __ASM_HARDIRQ_H */ diff --git a/include/asm-arm/hardware.h b/include/asm-arm/hardware.h deleted file mode 100644 index 1fd1a5b6504b..000000000000 --- a/include/asm-arm/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-arm/hardware.h - * - * Copyright (C) 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Common hardware definitions - */ - -#ifndef __ASM_HARDWARE_H -#define __ASM_HARDWARE_H - -#include - -#endif diff --git a/include/asm-arm/hardware/arm_timer.h b/include/asm-arm/hardware/arm_timer.h deleted file mode 100644 index 04be3bdf46b8..000000000000 --- a/include/asm-arm/hardware/arm_timer.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H -#define __ASM_ARM_HARDWARE_ARM_TIMER_H - -#define TIMER_LOAD 0x00 -#define TIMER_VALUE 0x04 -#define TIMER_CTRL 0x08 -#define TIMER_CTRL_ONESHOT (1 << 0) -#define TIMER_CTRL_32BIT (1 << 1) -#define TIMER_CTRL_DIV1 (0 << 2) -#define TIMER_CTRL_DIV16 (1 << 2) -#define TIMER_CTRL_DIV256 (2 << 2) -#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable (versatile only) */ -#define TIMER_CTRL_PERIODIC (1 << 6) -#define TIMER_CTRL_ENABLE (1 << 7) - -#define TIMER_INTCLR 0x0c -#define TIMER_RIS 0x10 -#define TIMER_MIS 0x14 -#define TIMER_BGLOAD 0x18 - -#endif diff --git a/include/asm-arm/hardware/arm_twd.h b/include/asm-arm/hardware/arm_twd.h deleted file mode 100644 index e521b70713c8..000000000000 --- a/include/asm-arm/hardware/arm_twd.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_HARDWARE_TWD_H -#define __ASM_HARDWARE_TWD_H - -#define TWD_TIMER_LOAD 0x00 -#define TWD_TIMER_COUNTER 0x04 -#define TWD_TIMER_CONTROL 0x08 -#define TWD_TIMER_INTSTAT 0x0C - -#define TWD_WDOG_LOAD 0x20 -#define TWD_WDOG_COUNTER 0x24 -#define TWD_WDOG_CONTROL 0x28 -#define TWD_WDOG_INTSTAT 0x2C -#define TWD_WDOG_RESETSTAT 0x30 -#define TWD_WDOG_DISABLE 0x34 - -#define TWD_TIMER_CONTROL_ENABLE (1 << 0) -#define TWD_TIMER_CONTROL_ONESHOT (0 << 1) -#define TWD_TIMER_CONTROL_PERIODIC (1 << 1) -#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2) - -#endif diff --git a/include/asm-arm/hardware/cache-l2x0.h b/include/asm-arm/hardware/cache-l2x0.h deleted file mode 100644 index 54029a740396..000000000000 --- a/include/asm-arm/hardware/cache-l2x0.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * include/asm-arm/hardware/cache-l2x0.h - * - * Copyright (C) 2007 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARM_HARDWARE_L2X0_H -#define __ASM_ARM_HARDWARE_L2X0_H - -#define L2X0_CACHE_ID 0x000 -#define L2X0_CACHE_TYPE 0x004 -#define L2X0_CTRL 0x100 -#define L2X0_AUX_CTRL 0x104 -#define L2X0_EVENT_CNT_CTRL 0x200 -#define L2X0_EVENT_CNT1_CFG 0x204 -#define L2X0_EVENT_CNT0_CFG 0x208 -#define L2X0_EVENT_CNT1_VAL 0x20C -#define L2X0_EVENT_CNT0_VAL 0x210 -#define L2X0_INTR_MASK 0x214 -#define L2X0_MASKED_INTR_STAT 0x218 -#define L2X0_RAW_INTR_STAT 0x21C -#define L2X0_INTR_CLEAR 0x220 -#define L2X0_CACHE_SYNC 0x730 -#define L2X0_INV_LINE_PA 0x770 -#define L2X0_INV_WAY 0x77C -#define L2X0_CLEAN_LINE_PA 0x7B0 -#define L2X0_CLEAN_LINE_IDX 0x7B8 -#define L2X0_CLEAN_WAY 0x7BC -#define L2X0_CLEAN_INV_LINE_PA 0x7F0 -#define L2X0_CLEAN_INV_LINE_IDX 0x7F8 -#define L2X0_CLEAN_INV_WAY 0x7FC -#define L2X0_LOCKDOWN_WAY_D 0x900 -#define L2X0_LOCKDOWN_WAY_I 0x904 -#define L2X0_TEST_OPERATION 0xF00 -#define L2X0_LINE_DATA 0xF10 -#define L2X0_LINE_TAG 0xF30 -#define L2X0_DEBUG_CTRL 0xF40 - -#ifndef __ASSEMBLY__ -extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask); -#endif - -#endif diff --git a/include/asm-arm/hardware/clps7111.h b/include/asm-arm/hardware/clps7111.h deleted file mode 100644 index 8d3228dc1778..000000000000 --- a/include/asm-arm/hardware/clps7111.h +++ /dev/null @@ -1,184 +0,0 @@ -/* - * linux/include/asm-arm/hardware/clps7111.h - * - * This file contains the hardware definitions of the CLPS7111 internal - * registers. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_HARDWARE_CLPS7111_H -#define __ASM_HARDWARE_CLPS7111_H - -#define CLPS7111_PHYS_BASE (0x80000000) - -#ifndef __ASSEMBLY__ -#define clps_readb(off) __raw_readb(CLPS7111_BASE + (off)) -#define clps_readw(off) __raw_readw(CLPS7111_BASE + (off)) -#define clps_readl(off) __raw_readl(CLPS7111_BASE + (off)) -#define clps_writeb(val,off) __raw_writeb(val, CLPS7111_BASE + (off)) -#define clps_writew(val,off) __raw_writew(val, CLPS7111_BASE + (off)) -#define clps_writel(val,off) __raw_writel(val, CLPS7111_BASE + (off)) -#endif - -#define PADR (0x0000) -#define PBDR (0x0001) -#define PDDR (0x0003) -#define PADDR (0x0040) -#define PBDDR (0x0041) -#define PDDDR (0x0043) -#define PEDR (0x0080) -#define PEDDR (0x00c0) -#define SYSCON1 (0x0100) -#define SYSFLG1 (0x0140) -#define MEMCFG1 (0x0180) -#define MEMCFG2 (0x01c0) -#define DRFPR (0x0200) -#define INTSR1 (0x0240) -#define INTMR1 (0x0280) -#define LCDCON (0x02c0) -#define TC1D (0x0300) -#define TC2D (0x0340) -#define RTCDR (0x0380) -#define RTCMR (0x03c0) -#define PMPCON (0x0400) -#define CODR (0x0440) -#define UARTDR1 (0x0480) -#define UBRLCR1 (0x04c0) -#define SYNCIO (0x0500) -#define PALLSW (0x0540) -#define PALMSW (0x0580) -#define STFCLR (0x05c0) -#define BLEOI (0x0600) -#define MCEOI (0x0640) -#define TEOI (0x0680) -#define TC1EOI (0x06c0) -#define TC2EOI (0x0700) -#define RTCEOI (0x0740) -#define UMSEOI (0x0780) -#define COEOI (0x07c0) -#define HALT (0x0800) -#define STDBY (0x0840) - -#define FBADDR (0x1000) -#define SYSCON2 (0x1100) -#define SYSFLG2 (0x1140) -#define INTSR2 (0x1240) -#define INTMR2 (0x1280) -#define UARTDR2 (0x1480) -#define UBRLCR2 (0x14c0) -#define SS2DR (0x1500) -#define SRXEOF (0x1600) -#define SS2POP (0x16c0) -#define KBDEOI (0x1700) - -/* common bits: SYSCON1 / SYSCON2 */ -#define SYSCON_UARTEN (1 << 8) - -#define SYSCON1_KBDSCAN(x) ((x) & 15) -#define SYSCON1_KBDSCANMASK (15) -#define SYSCON1_TC1M (1 << 4) -#define SYSCON1_TC1S (1 << 5) -#define SYSCON1_TC2M (1 << 6) -#define SYSCON1_TC2S (1 << 7) -#define SYSCON1_UART1EN SYSCON_UARTEN -#define SYSCON1_BZTOG (1 << 9) -#define SYSCON1_BZMOD (1 << 10) -#define SYSCON1_DBGEN (1 << 11) -#define SYSCON1_LCDEN (1 << 12) -#define SYSCON1_CDENTX (1 << 13) -#define SYSCON1_CDENRX (1 << 14) -#define SYSCON1_SIREN (1 << 15) -#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16) -#define SYSCON1_ADCKSEL_MASK (3 << 16) -#define SYSCON1_EXCKEN (1 << 18) -#define SYSCON1_WAKEDIS (1 << 19) -#define SYSCON1_IRTXM (1 << 20) - -/* common bits: SYSFLG1 / SYSFLG2 */ -#define SYSFLG_UBUSY (1 << 11) -#define SYSFLG_URXFE (1 << 22) -#define SYSFLG_UTXFF (1 << 23) - -#define SYSFLG1_MCDR (1 << 0) -#define SYSFLG1_DCDET (1 << 1) -#define SYSFLG1_WUDR (1 << 2) -#define SYSFLG1_WUON (1 << 3) -#define SYSFLG1_CTS (1 << 8) -#define SYSFLG1_DSR (1 << 9) -#define SYSFLG1_DCD (1 << 10) -#define SYSFLG1_UBUSY SYSFLG_UBUSY -#define SYSFLG1_NBFLG (1 << 12) -#define SYSFLG1_RSTFLG (1 << 13) -#define SYSFLG1_PFFLG (1 << 14) -#define SYSFLG1_CLDFLG (1 << 15) -#define SYSFLG1_URXFE SYSFLG_URXFE -#define SYSFLG1_UTXFF SYSFLG_UTXFF -#define SYSFLG1_CRXFE (1 << 24) -#define SYSFLG1_CTXFF (1 << 25) -#define SYSFLG1_SSIBUSY (1 << 26) -#define SYSFLG1_ID (1 << 29) - -#define SYSFLG2_SSRXOF (1 << 0) -#define SYSFLG2_RESVAL (1 << 1) -#define SYSFLG2_RESFRM (1 << 2) -#define SYSFLG2_SS2RXFE (1 << 3) -#define SYSFLG2_SS2TXFF (1 << 4) -#define SYSFLG2_SS2TXUF (1 << 5) -#define SYSFLG2_CKMODE (1 << 6) -#define SYSFLG2_UBUSY SYSFLG_UBUSY -#define SYSFLG2_URXFE SYSFLG_URXFE -#define SYSFLG2_UTXFF SYSFLG_UTXFF - -#define LCDCON_GSEN (1 << 30) -#define LCDCON_GSMD (1 << 31) - -#define SYSCON2_SERSEL (1 << 0) -#define SYSCON2_KBD6 (1 << 1) -#define SYSCON2_DRAMZ (1 << 2) -#define SYSCON2_KBWEN (1 << 3) -#define SYSCON2_SS2TXEN (1 << 4) -#define SYSCON2_PCCARD1 (1 << 5) -#define SYSCON2_PCCARD2 (1 << 6) -#define SYSCON2_SS2RXEN (1 << 7) -#define SYSCON2_UART2EN SYSCON_UARTEN -#define SYSCON2_SS2MAEN (1 << 9) -#define SYSCON2_OSTB (1 << 12) -#define SYSCON2_CLKENSL (1 << 13) -#define SYSCON2_BUZFREQ (1 << 14) - -/* common bits: UARTDR1 / UARTDR2 */ -#define UARTDR_FRMERR (1 << 8) -#define UARTDR_PARERR (1 << 9) -#define UARTDR_OVERR (1 << 10) - -/* common bits: UBRLCR1 / UBRLCR2 */ -#define UBRLCR_BAUD_MASK ((1 << 12) - 1) -#define UBRLCR_BREAK (1 << 12) -#define UBRLCR_PRTEN (1 << 13) -#define UBRLCR_EVENPRT (1 << 14) -#define UBRLCR_XSTOP (1 << 15) -#define UBRLCR_FIFOEN (1 << 16) -#define UBRLCR_WRDLEN5 (0 << 17) -#define UBRLCR_WRDLEN6 (1 << 17) -#define UBRLCR_WRDLEN7 (2 << 17) -#define UBRLCR_WRDLEN8 (3 << 17) -#define UBRLCR_WRDLEN_MASK (3 << 17) - -#define SYNCIO_SMCKEN (1 << 13) -#define SYNCIO_TXFRMEN (1 << 14) - -#endif /* __ASM_HARDWARE_CLPS7111_H */ diff --git a/include/asm-arm/hardware/cs89712.h b/include/asm-arm/hardware/cs89712.h deleted file mode 100644 index ad99a3e1b802..000000000000 --- a/include/asm-arm/hardware/cs89712.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/include/asm-arm/hardware/cs89712.h - * - * This file contains the hardware definitions of the CS89712 - * additional internal registers. - * - * Copyright (C) 2001 Thomas Gleixner autronix automation - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_HARDWARE_CS89712_H -#define __ASM_HARDWARE_CS89712_H - -/* -* CS89712 additional registers -*/ - -#define PCDR 0x0002 /* Port C Data register ---------------------------- */ -#define PCDDR 0x0042 /* Port C Data Direction register ------------------ */ -#define SDCONF 0x2300 /* SDRAM Configuration register ---------------------*/ -#define SDRFPR 0x2340 /* SDRAM Refresh period register --------------------*/ - -#define SDCONF_ACTIVE (1 << 10) -#define SDCONF_CLKCTL (1 << 9) -#define SDCONF_WIDTH_4 (0 << 7) -#define SDCONF_WIDTH_8 (1 << 7) -#define SDCONF_WIDTH_16 (2 << 7) -#define SDCONF_WIDTH_32 (3 << 7) -#define SDCONF_SIZE_16 (0 << 5) -#define SDCONF_SIZE_64 (1 << 5) -#define SDCONF_SIZE_128 (2 << 5) -#define SDCONF_SIZE_256 (3 << 5) -#define SDCONF_CASLAT_2 (2) -#define SDCONF_CASLAT_3 (3) - -#endif /* __ASM_HARDWARE_CS89712_H */ diff --git a/include/asm-arm/hardware/debug-8250.S b/include/asm-arm/hardware/debug-8250.S deleted file mode 100644 index 07c97fb233fc..000000000000 --- a/include/asm-arm/hardware/debug-8250.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/include/asm-arm/hardware/debug-8250.S - * - * Copyright (C) 1994-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - - .macro senduart,rd,rx - strb \rd, [\rx, #UART_TX << UART_SHIFT] - .endm - - .macro busyuart,rd,rx -1002: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1002b - .endm - - .macro waituart,rd,rx -#ifdef FLOW_CONTROL -1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT] - tst \rd, #UART_MSR_CTS - beq 1001b -#endif - .endm diff --git a/include/asm-arm/hardware/debug-pl01x.S b/include/asm-arm/hardware/debug-pl01x.S deleted file mode 100644 index 23c541a9e89a..000000000000 --- a/include/asm-arm/hardware/debug-pl01x.S +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/include/asm-arm/hardware/debug-pl01x.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ -#include - - .macro senduart,rd,rx - strb \rd, [\rx, #UART01x_DR] - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #UART01x_FR] - tst \rd, #UART01x_FR_TXFF - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #UART01x_FR] - tst \rd, #UART01x_FR_BUSY - bne 1001b - .endm diff --git a/include/asm-arm/hardware/dec21285.h b/include/asm-arm/hardware/dec21285.h deleted file mode 100644 index 546f7077be9c..000000000000 --- a/include/asm-arm/hardware/dec21285.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * linux/include/asm-arm/hardware/dec21285.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * DC21285 registers - */ -#define DC21285_PCI_IACK 0x79000000 -#define DC21285_ARMCSR_BASE 0x42000000 -#define DC21285_PCI_TYPE_0_CONFIG 0x7b000000 -#define DC21285_PCI_TYPE_1_CONFIG 0x7a000000 -#define DC21285_OUTBOUND_WRITE_FLUSH 0x78000000 -#define DC21285_FLASH 0x41000000 -#define DC21285_PCI_IO 0x7c000000 -#define DC21285_PCI_MEM 0x80000000 - -#ifndef __ASSEMBLY__ -#include -#define DC21285_IO(x) ((volatile unsigned long *)(ARMCSR_BASE+(x))) -#else -#define DC21285_IO(x) (x) -#endif - -#define CSR_PCICMD DC21285_IO(0x0004) -#define CSR_CLASSREV DC21285_IO(0x0008) -#define CSR_PCICACHELINESIZE DC21285_IO(0x000c) -#define CSR_PCICSRBASE DC21285_IO(0x0010) -#define CSR_PCICSRIOBASE DC21285_IO(0x0014) -#define CSR_PCISDRAMBASE DC21285_IO(0x0018) -#define CSR_PCIROMBASE DC21285_IO(0x0030) -#define CSR_MBOX0 DC21285_IO(0x0050) -#define CSR_MBOX1 DC21285_IO(0x0054) -#define CSR_MBOX2 DC21285_IO(0x0058) -#define CSR_MBOX3 DC21285_IO(0x005c) -#define CSR_DOORBELL DC21285_IO(0x0060) -#define CSR_DOORBELL_SETUP DC21285_IO(0x0064) -#define CSR_ROMWRITEREG DC21285_IO(0x0068) -#define CSR_CSRBASEMASK DC21285_IO(0x00f8) -#define CSR_CSRBASEOFFSET DC21285_IO(0x00fc) -#define CSR_SDRAMBASEMASK DC21285_IO(0x0100) -#define CSR_SDRAMBASEOFFSET DC21285_IO(0x0104) -#define CSR_ROMBASEMASK DC21285_IO(0x0108) -#define CSR_SDRAMTIMING DC21285_IO(0x010c) -#define CSR_SDRAMADDRSIZE0 DC21285_IO(0x0110) -#define CSR_SDRAMADDRSIZE1 DC21285_IO(0x0114) -#define CSR_SDRAMADDRSIZE2 DC21285_IO(0x0118) -#define CSR_SDRAMADDRSIZE3 DC21285_IO(0x011c) -#define CSR_I2O_INFREEHEAD DC21285_IO(0x0120) -#define CSR_I2O_INPOSTTAIL DC21285_IO(0x0124) -#define CSR_I2O_OUTPOSTHEAD DC21285_IO(0x0128) -#define CSR_I2O_OUTFREETAIL DC21285_IO(0x012c) -#define CSR_I2O_INFREECOUNT DC21285_IO(0x0130) -#define CSR_I2O_OUTPOSTCOUNT DC21285_IO(0x0134) -#define CSR_I2O_INPOSTCOUNT DC21285_IO(0x0138) -#define CSR_SA110_CNTL DC21285_IO(0x013c) -#define SA110_CNTL_INITCMPLETE (1 << 0) -#define SA110_CNTL_ASSERTSERR (1 << 1) -#define SA110_CNTL_RXSERR (1 << 3) -#define SA110_CNTL_SA110DRAMPARITY (1 << 4) -#define SA110_CNTL_PCISDRAMPARITY (1 << 5) -#define SA110_CNTL_DMASDRAMPARITY (1 << 6) -#define SA110_CNTL_DISCARDTIMER (1 << 8) -#define SA110_CNTL_PCINRESET (1 << 9) -#define SA110_CNTL_I2O_256 (0 << 10) -#define SA110_CNTL_I20_512 (1 << 10) -#define SA110_CNTL_I2O_1024 (2 << 10) -#define SA110_CNTL_I2O_2048 (3 << 10) -#define SA110_CNTL_I2O_4096 (4 << 10) -#define SA110_CNTL_I2O_8192 (5 << 10) -#define SA110_CNTL_I2O_16384 (6 << 10) -#define SA110_CNTL_I2O_32768 (7 << 10) -#define SA110_CNTL_WATCHDOG (1 << 13) -#define SA110_CNTL_ROMWIDTH_UNDEF (0 << 14) -#define SA110_CNTL_ROMWIDTH_16 (1 << 14) -#define SA110_CNTL_ROMWIDTH_32 (2 << 14) -#define SA110_CNTL_ROMWIDTH_8 (3 << 14) -#define SA110_CNTL_ROMACCESSTIME(x) ((x)<<16) -#define SA110_CNTL_ROMBURSTTIME(x) ((x)<<20) -#define SA110_CNTL_ROMTRISTATETIME(x) ((x)<<24) -#define SA110_CNTL_XCSDIR(x) ((x)<<28) -#define SA110_CNTL_PCICFN (1 << 31) - -/* - * footbridge_cfn_mode() is used when we want - * to check whether we are the central function - */ -#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN) -#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN) -#define footbridge_cfn_mode() __footbridge_cfn_mode() -#elif defined(CONFIG_FOOTBRIDGE_HOST) -#define footbridge_cfn_mode() (1) -#else -#define footbridge_cfn_mode() (0) -#endif - -#define CSR_PCIADDR_EXTN DC21285_IO(0x0140) -#define CSR_PREFETCHMEMRANGE DC21285_IO(0x0144) -#define CSR_XBUS_CYCLE DC21285_IO(0x0148) -#define CSR_XBUS_IOSTROBE DC21285_IO(0x014c) -#define CSR_DOORBELL_PCI DC21285_IO(0x0150) -#define CSR_DOORBELL_SA110 DC21285_IO(0x0154) -#define CSR_UARTDR DC21285_IO(0x0160) -#define CSR_RXSTAT DC21285_IO(0x0164) -#define CSR_H_UBRLCR DC21285_IO(0x0168) -#define CSR_M_UBRLCR DC21285_IO(0x016c) -#define CSR_L_UBRLCR DC21285_IO(0x0170) -#define CSR_UARTCON DC21285_IO(0x0174) -#define CSR_UARTFLG DC21285_IO(0x0178) -#define CSR_IRQ_STATUS DC21285_IO(0x0180) -#define CSR_IRQ_RAWSTATUS DC21285_IO(0x0184) -#define CSR_IRQ_ENABLE DC21285_IO(0x0188) -#define CSR_IRQ_DISABLE DC21285_IO(0x018c) -#define CSR_IRQ_SOFT DC21285_IO(0x0190) -#define CSR_FIQ_STATUS DC21285_IO(0x0280) -#define CSR_FIQ_RAWSTATUS DC21285_IO(0x0284) -#define CSR_FIQ_ENABLE DC21285_IO(0x0288) -#define CSR_FIQ_DISABLE DC21285_IO(0x028c) -#define CSR_FIQ_SOFT DC21285_IO(0x0290) -#define CSR_TIMER1_LOAD DC21285_IO(0x0300) -#define CSR_TIMER1_VALUE DC21285_IO(0x0304) -#define CSR_TIMER1_CNTL DC21285_IO(0x0308) -#define CSR_TIMER1_CLR DC21285_IO(0x030c) -#define CSR_TIMER2_LOAD DC21285_IO(0x0320) -#define CSR_TIMER2_VALUE DC21285_IO(0x0324) -#define CSR_TIMER2_CNTL DC21285_IO(0x0328) -#define CSR_TIMER2_CLR DC21285_IO(0x032c) -#define CSR_TIMER3_LOAD DC21285_IO(0x0340) -#define CSR_TIMER3_VALUE DC21285_IO(0x0344) -#define CSR_TIMER3_CNTL DC21285_IO(0x0348) -#define CSR_TIMER3_CLR DC21285_IO(0x034c) -#define CSR_TIMER4_LOAD DC21285_IO(0x0360) -#define CSR_TIMER4_VALUE DC21285_IO(0x0364) -#define CSR_TIMER4_CNTL DC21285_IO(0x0368) -#define CSR_TIMER4_CLR DC21285_IO(0x036c) - -#define TIMER_CNTL_ENABLE (1 << 7) -#define TIMER_CNTL_AUTORELOAD (1 << 6) -#define TIMER_CNTL_DIV1 (0) -#define TIMER_CNTL_DIV16 (1 << 2) -#define TIMER_CNTL_DIV256 (2 << 2) -#define TIMER_CNTL_CNTEXT (3 << 2) - - diff --git a/include/asm-arm/hardware/entry-macro-iomd.S b/include/asm-arm/hardware/entry-macro-iomd.S deleted file mode 100644 index 9bb580a5b15e..000000000000 --- a/include/asm-arm/hardware/entry-macro-iomd.S +++ /dev/null @@ -1,139 +0,0 @@ -/* - * include/asm-arm/hardware/entry-macro-iomd.S - * - * Low-level IRQ helper macros for IOC/IOMD based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/* IOC / IOMD based hardware */ -#include - - .macro disable_fiq - mov r12, #ioc_base_high - .if ioc_base_low - orr r12, r12, #ioc_base_low - .endif - strb r12, [r12, #0x38] @ Disable FIQ register - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldrb \irqstat, [\base, #IOMD_IRQREQB] @ get high priority first - ldr \tmp, =irq_prio_h - teq \irqstat, #0 -#ifdef IOMD_BASE - ldreqb \irqstat, [\base, #IOMD_DMAREQ] @ get dma - addeq \tmp, \tmp, #256 @ irq_prio_h table size - teqeq \irqstat, #0 - bne 2406f -#endif - ldreqb \irqstat, [\base, #IOMD_IRQREQA] @ get low priority - addeq \tmp, \tmp, #256 @ irq_prio_d table size - teqeq \irqstat, #0 -#ifdef IOMD_IRQREQC - ldreqb \irqstat, [\base, #IOMD_IRQREQC] - addeq \tmp, \tmp, #256 @ irq_prio_l table size - teqeq \irqstat, #0 -#endif -#ifdef IOMD_IRQREQD - ldreqb \irqstat, [\base, #IOMD_IRQREQD] - addeq \tmp, \tmp, #256 @ irq_prio_lc table size - teqeq \irqstat, #0 -#endif -2406: ldrneb \irqnr, [\tmp, \irqstat] @ get IRQ number - .endm - -/* - * Interrupt table (incorporates priority). Please note that we - * rely on the order of these tables (see above code). - */ - .align 5 -irq_prio_h: .byte 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 -#ifdef IOMD_BASE -irq_prio_d: .byte 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 -#endif -irq_prio_l: .byte 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 - .byte 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 - .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 - .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 - .byte 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3 - .byte 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3 - .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 - .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -#ifdef IOMD_IRQREQC -irq_prio_lc: .byte 24,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27 - .byte 28,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27 - .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 - .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 - .byte 30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27 - .byte 30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27 - .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 - .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 -#endif -#ifdef IOMD_IRQREQD -irq_prio_ld: .byte 40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43 - .byte 44,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43 - .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 - .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 - .byte 46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43 - .byte 46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43 - .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 - .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 -#endif - diff --git a/include/asm-arm/hardware/ep7211.h b/include/asm-arm/hardware/ep7211.h deleted file mode 100644 index 017aa68f612d..000000000000 --- a/include/asm-arm/hardware/ep7211.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/include/asm-arm/hardware/ep7211.h - * - * This file contains the hardware definitions of the EP7211 internal - * registers. - * - * Copyright (C) 2001 Blue Mug, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_HARDWARE_EP7211_H -#define __ASM_HARDWARE_EP7211_H - -#include - -/* - * define EP7211_BASE to be the base address of the region - * you want to access. - */ - -#define EP7211_PHYS_BASE (0x80000000) - -/* - * XXX miket@bluemug.com: need to introduce EP7211 registers (those not - * present in 7212) here. - */ - -#endif /* __ASM_HARDWARE_EP7211_H */ diff --git a/include/asm-arm/hardware/ep7212.h b/include/asm-arm/hardware/ep7212.h deleted file mode 100644 index 0e952e747073..000000000000 --- a/include/asm-arm/hardware/ep7212.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * linux/include/asm-arm/hardware/ep7212.h - * - * This file contains the hardware definitions of the EP7212 internal - * registers. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_HARDWARE_EP7212_H -#define __ASM_HARDWARE_EP7212_H - -/* - * define EP7212_BASE to be the base address of the region - * you want to access. - */ - -#define EP7212_PHYS_BASE (0x80000000) - -#ifndef __ASSEMBLY__ -#define ep_readl(off) __raw_readl(EP7212_BASE + (off)) -#define ep_writel(val,off) __raw_writel(val, EP7212_BASE + (off)) -#endif - -/* - * These registers are specific to the EP7212 only - */ -#define DAIR 0x2000 -#define DAIR0 0x2040 -#define DAIDR1 0x2080 -#define DAIDR2 0x20c0 -#define DAISR 0x2100 -#define SYSCON3 0x2200 -#define INTSR3 0x2240 -#define INTMR3 0x2280 -#define LEDFLSH 0x22c0 - -#define DAIR_DAIEN (1 << 16) -#define DAIR_ECS (1 << 17) -#define DAIR_LCTM (1 << 19) -#define DAIR_LCRM (1 << 20) -#define DAIR_RCTM (1 << 21) -#define DAIR_RCRM (1 << 22) -#define DAIR_LBM (1 << 23) - -#define DAIDR2_FIFOEN (1 << 15) -#define DAIDR2_FIFOLEFT (0x0d << 16) -#define DAIDR2_FIFORIGHT (0x11 << 16) - -#define DAISR_RCTS (1 << 0) -#define DAISR_RCRS (1 << 1) -#define DAISR_LCTS (1 << 2) -#define DAISR_LCRS (1 << 3) -#define DAISR_RCTU (1 << 4) -#define DAISR_RCRO (1 << 5) -#define DAISR_LCTU (1 << 6) -#define DAISR_LCRO (1 << 7) -#define DAISR_RCNF (1 << 8) -#define DAISR_RCNE (1 << 9) -#define DAISR_LCNF (1 << 10) -#define DAISR_LCNE (1 << 11) -#define DAISR_FIFO (1 << 12) - -#define SYSCON3_ADCCON (1 << 0) -#define SYSCON3_DAISEL (1 << 3) -#define SYSCON3_ADCCKNSEN (1 << 4) -#define SYSCON3_FASTWAKE (1 << 8) -#define SYSCON3_DAIEN (1 << 9) - -#endif /* __ASM_HARDWARE_EP7212_H */ diff --git a/include/asm-arm/hardware/gic.h b/include/asm-arm/hardware/gic.h deleted file mode 100644 index 966e428ad32c..000000000000 --- a/include/asm-arm/hardware/gic.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * linux/include/asm-arm/hardware/gic.h - * - * Copyright (C) 2002 ARM Limited, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_HARDWARE_GIC_H -#define __ASM_ARM_HARDWARE_GIC_H - -#include - -#define GIC_CPU_CTRL 0x00 -#define GIC_CPU_PRIMASK 0x04 -#define GIC_CPU_BINPOINT 0x08 -#define GIC_CPU_INTACK 0x0c -#define GIC_CPU_EOI 0x10 -#define GIC_CPU_RUNNINGPRI 0x14 -#define GIC_CPU_HIGHPRI 0x18 - -#define GIC_DIST_CTRL 0x000 -#define GIC_DIST_CTR 0x004 -#define GIC_DIST_ENABLE_SET 0x100 -#define GIC_DIST_ENABLE_CLEAR 0x180 -#define GIC_DIST_PENDING_SET 0x200 -#define GIC_DIST_PENDING_CLEAR 0x280 -#define GIC_DIST_ACTIVE_BIT 0x300 -#define GIC_DIST_PRI 0x400 -#define GIC_DIST_TARGET 0x800 -#define GIC_DIST_CONFIG 0xc00 -#define GIC_DIST_SOFTINT 0xf00 - -#ifndef __ASSEMBLY__ -void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start); -void gic_cpu_init(unsigned int gic_nr, void __iomem *base); -void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); -void gic_raise_softirq(cpumask_t cpumask, unsigned int irq); -#endif - -#endif diff --git a/include/asm-arm/hardware/icst307.h b/include/asm-arm/hardware/icst307.h deleted file mode 100644 index ff8618a441c0..000000000000 --- a/include/asm-arm/hardware/icst307.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/hardware/icst307.h - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICS307 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - * - * This file is similar to the icst525.h file - */ -#ifndef ASMARM_HARDWARE_ICST307_H -#define ASMARM_HARDWARE_ICST307_H - -struct icst307_params { - unsigned long ref; - unsigned long vco_max; /* inclusive */ - unsigned short vd_min; /* inclusive */ - unsigned short vd_max; /* inclusive */ - unsigned char rd_min; /* inclusive */ - unsigned char rd_max; /* inclusive */ -}; - -struct icst307_vco { - unsigned short v; - unsigned char r; - unsigned char s; -}; - -unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco); -struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq); -struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period); - -#endif diff --git a/include/asm-arm/hardware/icst525.h b/include/asm-arm/hardware/icst525.h deleted file mode 100644 index edd5a5704406..000000000000 --- a/include/asm-arm/hardware/icst525.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/include/asm-arm/hardware/icst525.h - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICST525 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - */ -#ifndef ASMARM_HARDWARE_ICST525_H -#define ASMARM_HARDWARE_ICST525_H - -struct icst525_params { - unsigned long ref; - unsigned long vco_max; /* inclusive */ - unsigned short vd_min; /* inclusive */ - unsigned short vd_max; /* inclusive */ - unsigned char rd_min; /* inclusive */ - unsigned char rd_max; /* inclusive */ -}; - -struct icst525_vco { - unsigned short v; - unsigned char r; - unsigned char s; -}; - -unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco); -struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq); -struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period); - -#endif diff --git a/include/asm-arm/hardware/ioc.h b/include/asm-arm/hardware/ioc.h deleted file mode 100644 index b3b46ef65943..000000000000 --- a/include/asm-arm/hardware/ioc.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * linux/include/asm-arm/hardware/ioc.h - * - * Copyright (C) Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Use these macros to read/write the IOC. All it does is perform the actual - * read/write. - */ -#ifndef __ASMARM_HARDWARE_IOC_H -#define __ASMARM_HARDWARE_IOC_H - -#ifndef __ASSEMBLY__ - -/* - * We use __raw_base variants here so that we give the compiler the - * chance to keep IOC_BASE in a register. - */ -#define ioc_readb(off) __raw_readb(IOC_BASE + (off)) -#define ioc_writeb(val,off) __raw_writeb(val, IOC_BASE + (off)) - -#endif - -#define IOC_CONTROL (0x00) -#define IOC_KARTTX (0x04) -#define IOC_KARTRX (0x04) - -#define IOC_IRQSTATA (0x10) -#define IOC_IRQREQA (0x14) -#define IOC_IRQCLRA (0x14) -#define IOC_IRQMASKA (0x18) - -#define IOC_IRQSTATB (0x20) -#define IOC_IRQREQB (0x24) -#define IOC_IRQMASKB (0x28) - -#define IOC_FIQSTAT (0x30) -#define IOC_FIQREQ (0x34) -#define IOC_FIQMASK (0x38) - -#define IOC_T0CNTL (0x40) -#define IOC_T0LTCHL (0x40) -#define IOC_T0CNTH (0x44) -#define IOC_T0LTCHH (0x44) -#define IOC_T0GO (0x48) -#define IOC_T0LATCH (0x4c) - -#define IOC_T1CNTL (0x50) -#define IOC_T1LTCHL (0x50) -#define IOC_T1CNTH (0x54) -#define IOC_T1LTCHH (0x54) -#define IOC_T1GO (0x58) -#define IOC_T1LATCH (0x5c) - -#define IOC_T2CNTL (0x60) -#define IOC_T2LTCHL (0x60) -#define IOC_T2CNTH (0x64) -#define IOC_T2LTCHH (0x64) -#define IOC_T2GO (0x68) -#define IOC_T2LATCH (0x6c) - -#define IOC_T3CNTL (0x70) -#define IOC_T3LTCHL (0x70) -#define IOC_T3CNTH (0x74) -#define IOC_T3LTCHH (0x74) -#define IOC_T3GO (0x78) -#define IOC_T3LATCH (0x7c) - -#endif diff --git a/include/asm-arm/hardware/iomd.h b/include/asm-arm/hardware/iomd.h deleted file mode 100644 index 396e55ad06c6..000000000000 --- a/include/asm-arm/hardware/iomd.h +++ /dev/null @@ -1,226 +0,0 @@ -/* - * linux/include/asm-arm/hardware/iomd.h - * - * Copyright (C) 1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file contains information out the IOMD ASIC used in the - * Acorn RiscPC and subsequently integrated into the CLPS7500 chips. - */ -#ifndef __ASMARM_HARDWARE_IOMD_H -#define __ASMARM_HARDWARE_IOMD_H - - -#ifndef __ASSEMBLY__ - -/* - * We use __raw_base variants here so that we give the compiler the - * chance to keep IOC_BASE in a register. - */ -#define iomd_readb(off) __raw_readb(IOMD_BASE + (off)) -#define iomd_readl(off) __raw_readl(IOMD_BASE + (off)) -#define iomd_writeb(val,off) __raw_writeb(val, IOMD_BASE + (off)) -#define iomd_writel(val,off) __raw_writel(val, IOMD_BASE + (off)) - -#endif - -#define IOMD_CONTROL (0x000) -#define IOMD_KARTTX (0x004) -#define IOMD_KARTRX (0x004) -#define IOMD_KCTRL (0x008) - -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_IOLINES (0x00C) -#endif - -#define IOMD_IRQSTATA (0x010) -#define IOMD_IRQREQA (0x014) -#define IOMD_IRQCLRA (0x014) -#define IOMD_IRQMASKA (0x018) - -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_SUSMODE (0x01C) -#endif - -#define IOMD_IRQSTATB (0x020) -#define IOMD_IRQREQB (0x024) -#define IOMD_IRQMASKB (0x028) - -#define IOMD_FIQSTAT (0x030) -#define IOMD_FIQREQ (0x034) -#define IOMD_FIQMASK (0x038) - -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_CLKCTL (0x03C) -#endif - -#define IOMD_T0CNTL (0x040) -#define IOMD_T0LTCHL (0x040) -#define IOMD_T0CNTH (0x044) -#define IOMD_T0LTCHH (0x044) -#define IOMD_T0GO (0x048) -#define IOMD_T0LATCH (0x04c) - -#define IOMD_T1CNTL (0x050) -#define IOMD_T1LTCHL (0x050) -#define IOMD_T1CNTH (0x054) -#define IOMD_T1LTCHH (0x054) -#define IOMD_T1GO (0x058) -#define IOMD_T1LATCH (0x05c) - -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_IRQSTATC (0x060) -#define IOMD_IRQREQC (0x064) -#define IOMD_IRQMASKC (0x068) - -#define IOMD_VIDMUX (0x06c) - -#define IOMD_IRQSTATD (0x070) -#define IOMD_IRQREQD (0x074) -#define IOMD_IRQMASKD (0x078) -#endif - -#define IOMD_ROMCR0 (0x080) -#define IOMD_ROMCR1 (0x084) -#ifdef CONFIG_ARCH_RPC -#define IOMD_DRAMCR (0x088) -#endif -#define IOMD_REFCR (0x08C) - -#define IOMD_FSIZE (0x090) -#define IOMD_ID0 (0x094) -#define IOMD_ID1 (0x098) -#define IOMD_VERSION (0x09C) - -#ifdef CONFIG_ARCH_RPC -#define IOMD_MOUSEX (0x0A0) -#define IOMD_MOUSEY (0x0A4) -#endif - -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_MSEDAT (0x0A8) -#define IOMD_MSECTL (0x0Ac) -#endif - -#ifdef CONFIG_ARCH_RPC -#define IOMD_DMATCR (0x0C0) -#endif -#define IOMD_IOTCR (0x0C4) -#define IOMD_ECTCR (0x0C8) -#ifdef CONFIG_ARCH_RPC -#define IOMD_DMAEXT (0x0CC) -#endif -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_ASTCR (0x0CC) -#define IOMD_DRAMCR (0x0D0) -#define IOMD_SELFREF (0x0D4) -#define IOMD_ATODICR (0x0E0) -#define IOMD_ATODSR (0x0E4) -#define IOMD_ATODCC (0x0E8) -#define IOMD_ATODCNT1 (0x0EC) -#define IOMD_ATODCNT2 (0x0F0) -#define IOMD_ATODCNT3 (0x0F4) -#define IOMD_ATODCNT4 (0x0F8) -#endif - -#ifdef CONFIG_ARCH_RPC -#define DMA_EXT_IO0 1 -#define DMA_EXT_IO1 2 -#define DMA_EXT_IO2 4 -#define DMA_EXT_IO3 8 - -#define IOMD_IO0CURA (0x100) -#define IOMD_IO0ENDA (0x104) -#define IOMD_IO0CURB (0x108) -#define IOMD_IO0ENDB (0x10C) -#define IOMD_IO0CR (0x110) -#define IOMD_IO0ST (0x114) - -#define IOMD_IO1CURA (0x120) -#define IOMD_IO1ENDA (0x124) -#define IOMD_IO1CURB (0x128) -#define IOMD_IO1ENDB (0x12C) -#define IOMD_IO1CR (0x130) -#define IOMD_IO1ST (0x134) - -#define IOMD_IO2CURA (0x140) -#define IOMD_IO2ENDA (0x144) -#define IOMD_IO2CURB (0x148) -#define IOMD_IO2ENDB (0x14C) -#define IOMD_IO2CR (0x150) -#define IOMD_IO2ST (0x154) - -#define IOMD_IO3CURA (0x160) -#define IOMD_IO3ENDA (0x164) -#define IOMD_IO3CURB (0x168) -#define IOMD_IO3ENDB (0x16C) -#define IOMD_IO3CR (0x170) -#define IOMD_IO3ST (0x174) -#endif - -#define IOMD_SD0CURA (0x180) -#define IOMD_SD0ENDA (0x184) -#define IOMD_SD0CURB (0x188) -#define IOMD_SD0ENDB (0x18C) -#define IOMD_SD0CR (0x190) -#define IOMD_SD0ST (0x194) - -#ifdef CONFIG_ARCH_RPC -#define IOMD_SD1CURA (0x1A0) -#define IOMD_SD1ENDA (0x1A4) -#define IOMD_SD1CURB (0x1A8) -#define IOMD_SD1ENDB (0x1AC) -#define IOMD_SD1CR (0x1B0) -#define IOMD_SD1ST (0x1B4) -#endif - -#define IOMD_CURSCUR (0x1C0) -#define IOMD_CURSINIT (0x1C4) - -#define IOMD_VIDCUR (0x1D0) -#define IOMD_VIDEND (0x1D4) -#define IOMD_VIDSTART (0x1D8) -#define IOMD_VIDINIT (0x1DC) -#define IOMD_VIDCR (0x1E0) - -#define IOMD_DMASTAT (0x1F0) -#define IOMD_DMAREQ (0x1F4) -#define IOMD_DMAMASK (0x1F8) - -#define DMA_END_S (1 << 31) -#define DMA_END_L (1 << 30) - -#define DMA_CR_C 0x80 -#define DMA_CR_D 0x40 -#define DMA_CR_E 0x20 - -#define DMA_ST_OFL 4 -#define DMA_ST_INT 2 -#define DMA_ST_AB 1 - -/* - * DMA (MEMC) compatibility - */ -#define HALF_SAM vram_half_sam -#define VDMA_ALIGNMENT (HALF_SAM * 2) -#define VDMA_XFERSIZE (HALF_SAM) -#define VDMA_INIT IOMD_VIDINIT -#define VDMA_START IOMD_VIDSTART -#define VDMA_END IOMD_VIDEND - -#ifndef __ASSEMBLY__ -extern unsigned int vram_half_sam; -#define video_set_dma(start,end,offset) \ -do { \ - outl (SCREEN_START + start, VDMA_START); \ - outl (SCREEN_START + end - VDMA_XFERSIZE, VDMA_END); \ - if (offset >= end - VDMA_XFERSIZE) \ - offset |= 0x40000000; \ - outl (SCREEN_START + offset, VDMA_INIT); \ -} while (0) -#endif - -#endif diff --git a/include/asm-arm/hardware/iop3xx-adma.h b/include/asm-arm/hardware/iop3xx-adma.h deleted file mode 100644 index af64676650a2..000000000000 --- a/include/asm-arm/hardware/iop3xx-adma.h +++ /dev/null @@ -1,888 +0,0 @@ -/* - * Copyright © 2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ -#ifndef _ADMA_H -#define _ADMA_H -#include -#include -#include -#include - -/* Memory copy units */ -#define DMA_CCR(chan) (chan->mmr_base + 0x0) -#define DMA_CSR(chan) (chan->mmr_base + 0x4) -#define DMA_DAR(chan) (chan->mmr_base + 0xc) -#define DMA_NDAR(chan) (chan->mmr_base + 0x10) -#define DMA_PADR(chan) (chan->mmr_base + 0x14) -#define DMA_PUADR(chan) (chan->mmr_base + 0x18) -#define DMA_LADR(chan) (chan->mmr_base + 0x1c) -#define DMA_BCR(chan) (chan->mmr_base + 0x20) -#define DMA_DCR(chan) (chan->mmr_base + 0x24) - -/* Application accelerator unit */ -#define AAU_ACR(chan) (chan->mmr_base + 0x0) -#define AAU_ASR(chan) (chan->mmr_base + 0x4) -#define AAU_ADAR(chan) (chan->mmr_base + 0x8) -#define AAU_ANDAR(chan) (chan->mmr_base + 0xc) -#define AAU_SAR(src, chan) (chan->mmr_base + (0x10 + ((src) << 2))) -#define AAU_DAR(chan) (chan->mmr_base + 0x20) -#define AAU_ABCR(chan) (chan->mmr_base + 0x24) -#define AAU_ADCR(chan) (chan->mmr_base + 0x28) -#define AAU_SAR_EDCR(src_edc) (chan->mmr_base + (0x02c + ((src_edc-4) << 2))) -#define AAU_EDCR0_IDX 8 -#define AAU_EDCR1_IDX 17 -#define AAU_EDCR2_IDX 26 - -#define DMA0_ID 0 -#define DMA1_ID 1 -#define AAU_ID 2 - -struct iop3xx_aau_desc_ctrl { - unsigned int int_en:1; - unsigned int blk1_cmd_ctrl:3; - unsigned int blk2_cmd_ctrl:3; - unsigned int blk3_cmd_ctrl:3; - unsigned int blk4_cmd_ctrl:3; - unsigned int blk5_cmd_ctrl:3; - unsigned int blk6_cmd_ctrl:3; - unsigned int blk7_cmd_ctrl:3; - unsigned int blk8_cmd_ctrl:3; - unsigned int blk_ctrl:2; - unsigned int dual_xor_en:1; - unsigned int tx_complete:1; - unsigned int zero_result_err:1; - unsigned int zero_result_en:1; - unsigned int dest_write_en:1; -}; - -struct iop3xx_aau_e_desc_ctrl { - unsigned int reserved:1; - unsigned int blk1_cmd_ctrl:3; - unsigned int blk2_cmd_ctrl:3; - unsigned int blk3_cmd_ctrl:3; - unsigned int blk4_cmd_ctrl:3; - unsigned int blk5_cmd_ctrl:3; - unsigned int blk6_cmd_ctrl:3; - unsigned int blk7_cmd_ctrl:3; - unsigned int blk8_cmd_ctrl:3; - unsigned int reserved2:7; -}; - -struct iop3xx_dma_desc_ctrl { - unsigned int pci_transaction:4; - unsigned int int_en:1; - unsigned int dac_cycle_en:1; - unsigned int mem_to_mem_en:1; - unsigned int crc_data_tx_en:1; - unsigned int crc_gen_en:1; - unsigned int crc_seed_dis:1; - unsigned int reserved:21; - unsigned int crc_tx_complete:1; -}; - -struct iop3xx_desc_dma { - u32 next_desc; - union { - u32 pci_src_addr; - u32 pci_dest_addr; - u32 src_addr; - }; - union { - u32 upper_pci_src_addr; - u32 upper_pci_dest_addr; - }; - union { - u32 local_pci_src_addr; - u32 local_pci_dest_addr; - u32 dest_addr; - }; - u32 byte_count; - union { - u32 desc_ctrl; - struct iop3xx_dma_desc_ctrl desc_ctrl_field; - }; - u32 crc_addr; -}; - -struct iop3xx_desc_aau { - u32 next_desc; - u32 src[4]; - u32 dest_addr; - u32 byte_count; - union { - u32 desc_ctrl; - struct iop3xx_aau_desc_ctrl desc_ctrl_field; - }; - union { - u32 src_addr; - u32 e_desc_ctrl; - struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field; - } src_edc[31]; -}; - -struct iop3xx_aau_gfmr { - unsigned int gfmr1:8; - unsigned int gfmr2:8; - unsigned int gfmr3:8; - unsigned int gfmr4:8; -}; - -struct iop3xx_desc_pq_xor { - u32 next_desc; - u32 src[3]; - union { - u32 data_mult1; - struct iop3xx_aau_gfmr data_mult1_field; - }; - u32 dest_addr; - u32 byte_count; - union { - u32 desc_ctrl; - struct iop3xx_aau_desc_ctrl desc_ctrl_field; - }; - union { - u32 src_addr; - u32 e_desc_ctrl; - struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field; - u32 data_multiplier; - struct iop3xx_aau_gfmr data_mult_field; - u32 reserved; - } src_edc_gfmr[19]; -}; - -struct iop3xx_desc_dual_xor { - u32 next_desc; - u32 src0_addr; - u32 src1_addr; - u32 h_src_addr; - u32 d_src_addr; - u32 h_dest_addr; - u32 byte_count; - union { - u32 desc_ctrl; - struct iop3xx_aau_desc_ctrl desc_ctrl_field; - }; - u32 d_dest_addr; -}; - -union iop3xx_desc { - struct iop3xx_desc_aau *aau; - struct iop3xx_desc_dma *dma; - struct iop3xx_desc_pq_xor *pq_xor; - struct iop3xx_desc_dual_xor *dual_xor; - void *ptr; -}; - -static inline int iop_adma_get_max_xor(void) -{ - return 32; -} - -static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan) -{ - int id = chan->device->id; - - switch (id) { - case DMA0_ID: - case DMA1_ID: - return __raw_readl(DMA_DAR(chan)); - case AAU_ID: - return __raw_readl(AAU_ADAR(chan)); - default: - BUG(); - } - return 0; -} - -static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan, - u32 next_desc_addr) -{ - int id = chan->device->id; - - switch (id) { - case DMA0_ID: - case DMA1_ID: - __raw_writel(next_desc_addr, DMA_NDAR(chan)); - break; - case AAU_ID: - __raw_writel(next_desc_addr, AAU_ANDAR(chan)); - break; - } - -} - -#define IOP_ADMA_STATUS_BUSY (1 << 10) -#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT (1024) -#define IOP_ADMA_XOR_MAX_BYTE_COUNT (16 * 1024 * 1024) -#define IOP_ADMA_MAX_BYTE_COUNT (16 * 1024 * 1024) - -static inline int iop_chan_is_busy(struct iop_adma_chan *chan) -{ - u32 status = __raw_readl(DMA_CSR(chan)); - return (status & IOP_ADMA_STATUS_BUSY) ? 1 : 0; -} - -static inline int iop_desc_is_aligned(struct iop_adma_desc_slot *desc, - int num_slots) -{ - /* num_slots will only ever be 1, 2, 4, or 8 */ - return (desc->idx & (num_slots - 1)) ? 0 : 1; -} - -/* to do: support large (i.e. > hw max) buffer sizes */ -static inline int iop_chan_memcpy_slot_count(size_t len, int *slots_per_op) -{ - *slots_per_op = 1; - return 1; -} - -/* to do: support large (i.e. > hw max) buffer sizes */ -static inline int iop_chan_memset_slot_count(size_t len, int *slots_per_op) -{ - *slots_per_op = 1; - return 1; -} - -static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt, - int *slots_per_op) -{ - static const char slot_count_table[] = { - 1, 1, 1, 1, /* 01 - 04 */ - 2, 2, 2, 2, /* 05 - 08 */ - 4, 4, 4, 4, /* 09 - 12 */ - 4, 4, 4, 4, /* 13 - 16 */ - 8, 8, 8, 8, /* 17 - 20 */ - 8, 8, 8, 8, /* 21 - 24 */ - 8, 8, 8, 8, /* 25 - 28 */ - 8, 8, 8, 8, /* 29 - 32 */ - }; - *slots_per_op = slot_count_table[src_cnt - 1]; - return *slots_per_op; -} - -static inline int -iop_chan_interrupt_slot_count(int *slots_per_op, struct iop_adma_chan *chan) -{ - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - return iop_chan_memcpy_slot_count(0, slots_per_op); - case AAU_ID: - return iop3xx_aau_xor_slot_count(0, 2, slots_per_op); - default: - BUG(); - } - return 0; -} - -static inline int iop_chan_xor_slot_count(size_t len, int src_cnt, - int *slots_per_op) -{ - int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op); - - if (len <= IOP_ADMA_XOR_MAX_BYTE_COUNT) - return slot_cnt; - - len -= IOP_ADMA_XOR_MAX_BYTE_COUNT; - while (len > IOP_ADMA_XOR_MAX_BYTE_COUNT) { - len -= IOP_ADMA_XOR_MAX_BYTE_COUNT; - slot_cnt += *slots_per_op; - } - - if (len) - slot_cnt += *slots_per_op; - - return slot_cnt; -} - -/* zero sum on iop3xx is limited to 1k at a time so it requires multiple - * descriptors - */ -static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt, - int *slots_per_op) -{ - int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op); - - if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) - return slot_cnt; - - len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; - while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) { - len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; - slot_cnt += *slots_per_op; - } - - if (len) - slot_cnt += *slots_per_op; - - return slot_cnt; -} - -static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - return hw_desc.dma->dest_addr; - case AAU_ID: - return hw_desc.aau->dest_addr; - default: - BUG(); - } - return 0; -} - -static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - return hw_desc.dma->byte_count; - case AAU_ID: - return hw_desc.aau->byte_count; - default: - BUG(); - } - return 0; -} - -/* translate the src_idx to a descriptor word index */ -static inline int __desc_idx(int src_idx) -{ - static const int desc_idx_table[] = { 0, 0, 0, 0, - 0, 1, 2, 3, - 5, 6, 7, 8, - 9, 10, 11, 12, - 14, 15, 16, 17, - 18, 19, 20, 21, - 23, 24, 25, 26, - 27, 28, 29, 30, - }; - - return desc_idx_table[src_idx]; -} - -static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan, - int src_idx) -{ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - return hw_desc.dma->src_addr; - case AAU_ID: - break; - default: - BUG(); - } - - if (src_idx < 4) - return hw_desc.aau->src[src_idx]; - else - return hw_desc.aau->src_edc[__desc_idx(src_idx)].src_addr; -} - -static inline void iop3xx_aau_desc_set_src_addr(struct iop3xx_desc_aau *hw_desc, - int src_idx, dma_addr_t addr) -{ - if (src_idx < 4) - hw_desc->src[src_idx] = addr; - else - hw_desc->src_edc[__desc_idx(src_idx)].src_addr = addr; -} - -static inline void -iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags) -{ - struct iop3xx_desc_dma *hw_desc = desc->hw_desc; - union { - u32 value; - struct iop3xx_dma_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - u_desc_ctrl.field.mem_to_mem_en = 1; - u_desc_ctrl.field.pci_transaction = 0xe; /* memory read block */ - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; - hw_desc->upper_pci_src_addr = 0; - hw_desc->crc_addr = 0; -} - -static inline void -iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags) -{ - struct iop3xx_desc_aau *hw_desc = desc->hw_desc; - union { - u32 value; - struct iop3xx_aau_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - u_desc_ctrl.field.blk1_cmd_ctrl = 0x2; /* memory block fill */ - u_desc_ctrl.field.dest_write_en = 1; - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; -} - -static inline u32 -iop3xx_desc_init_xor(struct iop3xx_desc_aau *hw_desc, int src_cnt, - unsigned long flags) -{ - int i, shift; - u32 edcr; - union { - u32 value; - struct iop3xx_aau_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - switch (src_cnt) { - case 25 ... 32: - u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ - edcr = 0; - shift = 1; - for (i = 24; i < src_cnt; i++) { - edcr |= (1 << shift); - shift += 3; - } - hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = edcr; - src_cnt = 24; - /* fall through */ - case 17 ... 24: - if (!u_desc_ctrl.field.blk_ctrl) { - hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0; - u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ - } - edcr = 0; - shift = 1; - for (i = 16; i < src_cnt; i++) { - edcr |= (1 << shift); - shift += 3; - } - hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = edcr; - src_cnt = 16; - /* fall through */ - case 9 ... 16: - if (!u_desc_ctrl.field.blk_ctrl) - u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */ - edcr = 0; - shift = 1; - for (i = 8; i < src_cnt; i++) { - edcr |= (1 << shift); - shift += 3; - } - hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = edcr; - src_cnt = 8; - /* fall through */ - case 2 ... 8: - shift = 1; - for (i = 0; i < src_cnt; i++) { - u_desc_ctrl.value |= (1 << shift); - shift += 3; - } - - if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4) - u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */ - } - - u_desc_ctrl.field.dest_write_en = 1; - u_desc_ctrl.field.blk1_cmd_ctrl = 0x7; /* direct fill */ - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; - - return u_desc_ctrl.value; -} - -static inline void -iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt, - unsigned long flags) -{ - iop3xx_desc_init_xor(desc->hw_desc, src_cnt, flags); -} - -/* return the number of operations */ -static inline int -iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt, - unsigned long flags) -{ - int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op; - struct iop3xx_desc_aau *hw_desc, *prev_hw_desc, *iter; - union { - u32 value; - struct iop3xx_aau_desc_ctrl field; - } u_desc_ctrl; - int i, j; - - hw_desc = desc->hw_desc; - - for (i = 0, j = 0; (slot_cnt -= slots_per_op) >= 0; - i += slots_per_op, j++) { - iter = iop_hw_desc_slot_idx(hw_desc, i); - u_desc_ctrl.value = iop3xx_desc_init_xor(iter, src_cnt, flags); - u_desc_ctrl.field.dest_write_en = 0; - u_desc_ctrl.field.zero_result_en = 1; - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - iter->desc_ctrl = u_desc_ctrl.value; - - /* for the subsequent descriptors preserve the store queue - * and chain them together - */ - if (i) { - prev_hw_desc = - iop_hw_desc_slot_idx(hw_desc, i - slots_per_op); - prev_hw_desc->next_desc = - (u32) (desc->async_tx.phys + (i << 5)); - } - } - - return j; -} - -static inline void -iop_desc_init_null_xor(struct iop_adma_desc_slot *desc, int src_cnt, - unsigned long flags) -{ - struct iop3xx_desc_aau *hw_desc = desc->hw_desc; - union { - u32 value; - struct iop3xx_aau_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - switch (src_cnt) { - case 25 ... 32: - u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ - hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0; - /* fall through */ - case 17 ... 24: - if (!u_desc_ctrl.field.blk_ctrl) { - hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0; - u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */ - } - hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = 0; - /* fall through */ - case 9 ... 16: - if (!u_desc_ctrl.field.blk_ctrl) - u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */ - hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = 0; - /* fall through */ - case 1 ... 8: - if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4) - u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */ - } - - u_desc_ctrl.field.dest_write_en = 0; - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; -} - -static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan, - u32 byte_count) -{ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - hw_desc.dma->byte_count = byte_count; - break; - case AAU_ID: - hw_desc.aau->byte_count = byte_count; - break; - default: - BUG(); - } -} - -static inline void -iop_desc_init_interrupt(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - iop_desc_init_memcpy(desc, 1); - hw_desc.dma->byte_count = 0; - hw_desc.dma->dest_addr = 0; - hw_desc.dma->src_addr = 0; - break; - case AAU_ID: - iop_desc_init_null_xor(desc, 2, 1); - hw_desc.aau->byte_count = 0; - hw_desc.aau->dest_addr = 0; - hw_desc.aau->src[0] = 0; - hw_desc.aau->src[1] = 0; - break; - default: - BUG(); - } -} - -static inline void -iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len) -{ - int slots_per_op = desc->slots_per_op; - struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter; - int i = 0; - - if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) { - hw_desc->byte_count = len; - } else { - do { - iter = iop_hw_desc_slot_idx(hw_desc, i); - iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; - len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; - i += slots_per_op; - } while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT); - - if (len) { - iter = iop_hw_desc_slot_idx(hw_desc, i); - iter->byte_count = len; - } - } -} - -static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan, - dma_addr_t addr) -{ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - hw_desc.dma->dest_addr = addr; - break; - case AAU_ID: - hw_desc.aau->dest_addr = addr; - break; - default: - BUG(); - } -} - -static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc, - dma_addr_t addr) -{ - struct iop3xx_desc_dma *hw_desc = desc->hw_desc; - hw_desc->src_addr = addr; -} - -static inline void -iop_desc_set_zero_sum_src_addr(struct iop_adma_desc_slot *desc, int src_idx, - dma_addr_t addr) -{ - - struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter; - int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op; - int i; - - for (i = 0; (slot_cnt -= slots_per_op) >= 0; - i += slots_per_op, addr += IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) { - iter = iop_hw_desc_slot_idx(hw_desc, i); - iop3xx_aau_desc_set_src_addr(iter, src_idx, addr); - } -} - -static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc, - int src_idx, dma_addr_t addr) -{ - - struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter; - int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op; - int i; - - for (i = 0; (slot_cnt -= slots_per_op) >= 0; - i += slots_per_op, addr += IOP_ADMA_XOR_MAX_BYTE_COUNT) { - iter = iop_hw_desc_slot_idx(hw_desc, i); - iop3xx_aau_desc_set_src_addr(iter, src_idx, addr); - } -} - -static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc, - u32 next_desc_addr) -{ - /* hw_desc->next_desc is the same location for all channels */ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - BUG_ON(hw_desc.dma->next_desc); - hw_desc.dma->next_desc = next_desc_addr; -} - -static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc) -{ - /* hw_desc->next_desc is the same location for all channels */ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - return hw_desc.dma->next_desc; -} - -static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc) -{ - /* hw_desc->next_desc is the same location for all channels */ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - hw_desc.dma->next_desc = 0; -} - -static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc, - u32 val) -{ - struct iop3xx_desc_aau *hw_desc = desc->hw_desc; - hw_desc->src[0] = val; -} - -static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc) -{ - struct iop3xx_desc_aau *hw_desc = desc->hw_desc; - struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field; - - BUG_ON(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en)); - return desc_ctrl.zero_result_err; -} - -static inline void iop_chan_append(struct iop_adma_chan *chan) -{ - u32 dma_chan_ctrl; - - dma_chan_ctrl = __raw_readl(DMA_CCR(chan)); - dma_chan_ctrl |= 0x2; - __raw_writel(dma_chan_ctrl, DMA_CCR(chan)); -} - -static inline u32 iop_chan_get_status(struct iop_adma_chan *chan) -{ - return __raw_readl(DMA_CSR(chan)); -} - -static inline void iop_chan_disable(struct iop_adma_chan *chan) -{ - u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan)); - dma_chan_ctrl &= ~1; - __raw_writel(dma_chan_ctrl, DMA_CCR(chan)); -} - -static inline void iop_chan_enable(struct iop_adma_chan *chan) -{ - u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan)); - - dma_chan_ctrl |= 1; - __raw_writel(dma_chan_ctrl, DMA_CCR(chan)); -} - -static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan) -{ - u32 status = __raw_readl(DMA_CSR(chan)); - status &= (1 << 9); - __raw_writel(status, DMA_CSR(chan)); -} - -static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan) -{ - u32 status = __raw_readl(DMA_CSR(chan)); - status &= (1 << 8); - __raw_writel(status, DMA_CSR(chan)); -} - -static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan) -{ - u32 status = __raw_readl(DMA_CSR(chan)); - - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - status &= (1 << 5) | (1 << 3) | (1 << 2) | (1 << 1); - break; - case AAU_ID: - status &= (1 << 5); - break; - default: - BUG(); - } - - __raw_writel(status, DMA_CSR(chan)); -} - -static inline int -iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan) -{ - return 0; -} - -static inline int -iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan) -{ - return 0; -} - -static inline int -iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan) -{ - return 0; -} - -static inline int -iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan) -{ - return test_bit(5, &status); -} - -static inline int -iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan) -{ - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - return test_bit(2, &status); - default: - return 0; - } -} - -static inline int -iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan) -{ - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - return test_bit(3, &status); - default: - return 0; - } -} - -static inline int -iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan) -{ - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - return test_bit(1, &status); - default: - return 0; - } -} -#endif /* _ADMA_H */ diff --git a/include/asm-arm/hardware/iop3xx-gpio.h b/include/asm-arm/hardware/iop3xx-gpio.h deleted file mode 100644 index 0c9331f9ac24..000000000000 --- a/include/asm-arm/hardware/iop3xx-gpio.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * linux/include/asm-arm/hardware/iop3xx-gpio.h - * - * IOP3xx GPIO wrappers - * - * Copyright (c) 2008 Arnaud Patard - * Based on IXP4XX gpio.h file - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H -#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H - -#include -#include - -#define IOP3XX_N_GPIOS 8 - -static inline int gpio_get_value(unsigned gpio) -{ - if (gpio > IOP3XX_N_GPIOS) - return __gpio_get_value(gpio); - - return gpio_line_get(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (gpio > IOP3XX_N_GPIOS) { - __gpio_set_value(gpio, value); - return; - } - gpio_line_set(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - if (gpio < IOP3XX_N_GPIOS) - return 0; - else - return __gpio_cansleep(gpio); -} - -/* - * The GPIOs are not generating any interrupt - * Note : manuals are not clear about this - */ -static inline int gpio_to_irq(int gpio) -{ - return -EINVAL; -} - -static inline int irq_to_gpio(int gpio) -{ - return -EINVAL; -} - -#endif - diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h deleted file mode 100644 index 18f6937f5010..000000000000 --- a/include/asm-arm/hardware/iop3xx.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - * include/asm-arm/hardware/iop3xx.h - * - * Intel IOP32X and IOP33X register definitions - * - * Author: Rory Bolt - * Copyright (C) 2002 Rory Bolt - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IOP3XX_H -#define __IOP3XX_H - -/* - * IOP3XX GPIO handling - */ -#define GPIO_IN 0 -#define GPIO_OUT 1 -#define GPIO_LOW 0 -#define GPIO_HIGH 1 -#define IOP3XX_GPIO_LINE(x) (x) - -#ifndef __ASSEMBLY__ -extern void gpio_line_config(int line, int direction); -extern int gpio_line_get(int line); -extern void gpio_line_set(int line, int value); -extern int init_atu; -extern int iop3xx_get_init_atu(void); -#endif - - -/* - * IOP3XX processor registers - */ -#define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000 -#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfeffe000 -#define IOP3XX_PERIPHERAL_SIZE 0x00002000 -#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\ - IOP3XX_PERIPHERAL_SIZE - 1) -#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\ - IOP3XX_PERIPHERAL_SIZE - 1) -#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) (addr) -\ - (IOP3XX_PERIPHERAL_PHYS_BASE\ - - IOP3XX_PERIPHERAL_VIRT_BASE)) -#define IOP3XX_REG_ADDR(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + (reg)) - -/* Address Translation Unit */ -#define IOP3XX_ATUVID (volatile u16 *)IOP3XX_REG_ADDR(0x0100) -#define IOP3XX_ATUDID (volatile u16 *)IOP3XX_REG_ADDR(0x0102) -#define IOP3XX_ATUCMD (volatile u16 *)IOP3XX_REG_ADDR(0x0104) -#define IOP3XX_ATUSR (volatile u16 *)IOP3XX_REG_ADDR(0x0106) -#define IOP3XX_ATURID (volatile u8 *)IOP3XX_REG_ADDR(0x0108) -#define IOP3XX_ATUCCR (volatile u32 *)IOP3XX_REG_ADDR(0x0109) -#define IOP3XX_ATUCLSR (volatile u8 *)IOP3XX_REG_ADDR(0x010c) -#define IOP3XX_ATULT (volatile u8 *)IOP3XX_REG_ADDR(0x010d) -#define IOP3XX_ATUHTR (volatile u8 *)IOP3XX_REG_ADDR(0x010e) -#define IOP3XX_ATUBIST (volatile u8 *)IOP3XX_REG_ADDR(0x010f) -#define IOP3XX_IABAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0110) -#define IOP3XX_IAUBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0114) -#define IOP3XX_IABAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0118) -#define IOP3XX_IAUBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x011c) -#define IOP3XX_IABAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0120) -#define IOP3XX_IAUBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0124) -#define IOP3XX_ASVIR (volatile u16 *)IOP3XX_REG_ADDR(0x012c) -#define IOP3XX_ASIR (volatile u16 *)IOP3XX_REG_ADDR(0x012e) -#define IOP3XX_ERBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0130) -#define IOP3XX_ATUILR (volatile u8 *)IOP3XX_REG_ADDR(0x013c) -#define IOP3XX_ATUIPR (volatile u8 *)IOP3XX_REG_ADDR(0x013d) -#define IOP3XX_ATUMGNT (volatile u8 *)IOP3XX_REG_ADDR(0x013e) -#define IOP3XX_ATUMLAT (volatile u8 *)IOP3XX_REG_ADDR(0x013f) -#define IOP3XX_IALR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0140) -#define IOP3XX_IATVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0144) -#define IOP3XX_ERLR (volatile u32 *)IOP3XX_REG_ADDR(0x0148) -#define IOP3XX_ERTVR (volatile u32 *)IOP3XX_REG_ADDR(0x014c) -#define IOP3XX_IALR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0150) -#define IOP3XX_IALR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0154) -#define IOP3XX_IATVR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0158) -#define IOP3XX_OIOWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x015c) -#define IOP3XX_OMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0160) -#define IOP3XX_OUMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0164) -#define IOP3XX_OMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0168) -#define IOP3XX_OUMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x016c) -#define IOP3XX_OUDWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x0178) -#define IOP3XX_ATUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0180) -#define IOP3XX_PCSR (volatile u32 *)IOP3XX_REG_ADDR(0x0184) -#define IOP3XX_ATUISR (volatile u32 *)IOP3XX_REG_ADDR(0x0188) -#define IOP3XX_ATUIMR (volatile u32 *)IOP3XX_REG_ADDR(0x018c) -#define IOP3XX_IABAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0190) -#define IOP3XX_IAUBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0194) -#define IOP3XX_IALR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0198) -#define IOP3XX_IATVR3 (volatile u32 *)IOP3XX_REG_ADDR(0x019c) -#define IOP3XX_OCCAR (volatile u32 *)IOP3XX_REG_ADDR(0x01a4) -#define IOP3XX_OCCDR (volatile u32 *)IOP3XX_REG_ADDR(0x01ac) -#define IOP3XX_PDSCR (volatile u32 *)IOP3XX_REG_ADDR(0x01bc) -#define IOP3XX_PMCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01c0) -#define IOP3XX_PMNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01c1) -#define IOP3XX_APMCR (volatile u16 *)IOP3XX_REG_ADDR(0x01c2) -#define IOP3XX_APMCSR (volatile u16 *)IOP3XX_REG_ADDR(0x01c4) -#define IOP3XX_PCIXCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01e0) -#define IOP3XX_PCIXNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01e1) -#define IOP3XX_PCIXCMD (volatile u16 *)IOP3XX_REG_ADDR(0x01e2) -#define IOP3XX_PCIXSR (volatile u32 *)IOP3XX_REG_ADDR(0x01e4) -#define IOP3XX_PCIIRSR (volatile u32 *)IOP3XX_REG_ADDR(0x01ec) -#define IOP3XX_PCSR_OUT_Q_BUSY (1 << 15) -#define IOP3XX_PCSR_IN_Q_BUSY (1 << 14) -#define IOP3XX_ATUCR_OUT_EN (1 << 1) - -#define IOP3XX_INIT_ATU_DEFAULT 0 -#define IOP3XX_INIT_ATU_DISABLE -1 -#define IOP3XX_INIT_ATU_ENABLE 1 - -/* Messaging Unit */ -#define IOP3XX_IMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0310) -#define IOP3XX_IMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0314) -#define IOP3XX_OMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0318) -#define IOP3XX_OMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x031c) -#define IOP3XX_IDR (volatile u32 *)IOP3XX_REG_ADDR(0x0320) -#define IOP3XX_IISR (volatile u32 *)IOP3XX_REG_ADDR(0x0324) -#define IOP3XX_IIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0328) -#define IOP3XX_ODR (volatile u32 *)IOP3XX_REG_ADDR(0x032c) -#define IOP3XX_OISR (volatile u32 *)IOP3XX_REG_ADDR(0x0330) -#define IOP3XX_OIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0334) -#define IOP3XX_MUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0350) -#define IOP3XX_QBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0354) -#define IOP3XX_IFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0360) -#define IOP3XX_IFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0364) -#define IOP3XX_IPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0368) -#define IOP3XX_IPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x036c) -#define IOP3XX_OFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0370) -#define IOP3XX_OFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0374) -#define IOP3XX_OPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0378) -#define IOP3XX_OPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x037c) -#define IOP3XX_IAR (volatile u32 *)IOP3XX_REG_ADDR(0x0380) - -/* DMA Controller */ -#define IOP3XX_DMA_PHYS_BASE(chan) (IOP3XX_PERIPHERAL_PHYS_BASE + \ - (0x400 + (chan << 6))) -#define IOP3XX_DMA_UPPER_PA(chan) (IOP3XX_DMA_PHYS_BASE(chan) + 0x27) - -/* Peripheral bus interface */ -#define IOP3XX_PBCR (volatile u32 *)IOP3XX_REG_ADDR(0x0680) -#define IOP3XX_PBISR (volatile u32 *)IOP3XX_REG_ADDR(0x0684) -#define IOP3XX_PBBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0688) -#define IOP3XX_PBLR0 (volatile u32 *)IOP3XX_REG_ADDR(0x068c) -#define IOP3XX_PBBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0690) -#define IOP3XX_PBLR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0694) -#define IOP3XX_PBBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0698) -#define IOP3XX_PBLR2 (volatile u32 *)IOP3XX_REG_ADDR(0x069c) -#define IOP3XX_PBBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a0) -#define IOP3XX_PBLR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a4) -#define IOP3XX_PBBAR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06a8) -#define IOP3XX_PBLR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06ac) -#define IOP3XX_PBBAR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b0) -#define IOP3XX_PBLR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b4) -#define IOP3XX_PMBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x06c0) -#define IOP3XX_PMBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x06e0) -#define IOP3XX_PMBR2 (volatile u32 *)IOP3XX_REG_ADDR(0x06e4) - -/* Peripheral performance monitoring unit */ -#define IOP3XX_GTMR (volatile u32 *)IOP3XX_REG_ADDR(0x0700) -#define IOP3XX_ESR (volatile u32 *)IOP3XX_REG_ADDR(0x0704) -#define IOP3XX_EMISR (volatile u32 *)IOP3XX_REG_ADDR(0x0708) -#define IOP3XX_GTSR (volatile u32 *)IOP3XX_REG_ADDR(0x0710) -/* PERCR0 DOESN'T EXIST - index from 1! */ -#define IOP3XX_PERCR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0710) - -/* General Purpose I/O */ -#define IOP3XX_GPOE (volatile u32 *)IOP3XX_GPIO_REG(0x0000) -#define IOP3XX_GPID (volatile u32 *)IOP3XX_GPIO_REG(0x0004) -#define IOP3XX_GPOD (volatile u32 *)IOP3XX_GPIO_REG(0x0008) - -/* Timers */ -#define IOP3XX_TU_TMR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0000) -#define IOP3XX_TU_TMR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0004) -#define IOP3XX_TU_TCR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0008) -#define IOP3XX_TU_TCR1 (volatile u32 *)IOP3XX_TIMER_REG(0x000c) -#define IOP3XX_TU_TRR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0010) -#define IOP3XX_TU_TRR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0014) -#define IOP3XX_TU_TISR (volatile u32 *)IOP3XX_TIMER_REG(0x0018) -#define IOP3XX_TU_WDTCR (volatile u32 *)IOP3XX_TIMER_REG(0x001c) -#define IOP_TMR_EN 0x02 -#define IOP_TMR_RELOAD 0x04 -#define IOP_TMR_PRIVILEGED 0x08 -#define IOP_TMR_RATIO_1_1 0x00 - -/* Watchdog timer definitions */ -#define IOP_WDTCR_EN_ARM 0x1e1e1e1e -#define IOP_WDTCR_EN 0xe1e1e1e1 -/* iop3xx does not support stopping the watchdog, so we just re-arm */ -#define IOP_WDTCR_DIS_ARM (IOP_WDTCR_EN_ARM) -#define IOP_WDTCR_DIS (IOP_WDTCR_EN) - -/* Application accelerator unit */ -#define IOP3XX_AAU_PHYS_BASE (IOP3XX_PERIPHERAL_PHYS_BASE + 0x800) -#define IOP3XX_AAU_UPPER_PA (IOP3XX_AAU_PHYS_BASE + 0xa7) - -/* I2C bus interface unit */ -#define IOP3XX_ICR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1680) -#define IOP3XX_ISR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1684) -#define IOP3XX_ISAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1688) -#define IOP3XX_IDBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x168c) -#define IOP3XX_IBMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1694) -#define IOP3XX_ICR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a0) -#define IOP3XX_ISR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a4) -#define IOP3XX_ISAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a8) -#define IOP3XX_IDBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16ac) -#define IOP3XX_IBMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16b4) - - -/* - * IOP3XX I/O and Mem space regions for PCI autoconfiguration - */ -#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000 - -#define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000 -#define IOP3XX_PCI_LOWER_IO_PA 0x90000000 -#define IOP3XX_PCI_LOWER_IO_VA 0xfe000000 -#define IOP3XX_PCI_LOWER_IO_BA 0x90000000 -#define IOP3XX_PCI_UPPER_IO_PA (IOP3XX_PCI_LOWER_IO_PA +\ - IOP3XX_PCI_IO_WINDOW_SIZE - 1) -#define IOP3XX_PCI_UPPER_IO_VA (IOP3XX_PCI_LOWER_IO_VA +\ - IOP3XX_PCI_IO_WINDOW_SIZE - 1) -#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\ - IOP3XX_PCI_LOWER_IO_PA) +\ - IOP3XX_PCI_LOWER_IO_VA) - - -#ifndef __ASSEMBLY__ -void iop3xx_map_io(void); -void iop_init_cp6_handler(void); -void iop_init_time(unsigned long tickrate); -unsigned long iop_gettimeoffset(void); - -static inline void write_tmr0(u32 val) -{ - asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (val)); -} - -static inline void write_tmr1(u32 val) -{ - asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (val)); -} - -static inline u32 read_tcr0(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c2, c1, 0" : "=r" (val)); - return val; -} - -static inline u32 read_tcr1(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c3, c1, 0" : "=r" (val)); - return val; -} - -static inline void write_trr0(u32 val) -{ - asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val)); -} - -static inline void write_trr1(u32 val) -{ - asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (val)); -} - -static inline void write_tisr(u32 val) -{ - asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (val)); -} - -static inline u32 read_wdtcr(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c7, c1, 0":"=r" (val)); - return val; -} -static inline void write_wdtcr(u32 val) -{ - asm volatile("mcr p6, 0, %0, c7, c1, 0"::"r" (val)); -} - -extern unsigned long get_iop_tick_rate(void); - -/* only iop13xx has these registers, we define these to present a - * common register interface for the iop_wdt driver. - */ -#define IOP_RCSR_WDT (0) -static inline u32 read_rcsr(void) -{ - return 0; -} -static inline void write_wdtsr(u32 val) -{ - do { } while (0); -} - -extern struct platform_device iop3xx_dma_0_channel; -extern struct platform_device iop3xx_dma_1_channel; -extern struct platform_device iop3xx_aau_channel; -extern struct platform_device iop3xx_i2c0_device; -extern struct platform_device iop3xx_i2c1_device; - -#endif - - -#endif diff --git a/include/asm-arm/hardware/iop_adma.h b/include/asm-arm/hardware/iop_adma.h deleted file mode 100644 index cb7e3611bcba..000000000000 --- a/include/asm-arm/hardware/iop_adma.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Copyright © 2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ -#ifndef IOP_ADMA_H -#define IOP_ADMA_H -#include -#include -#include - -#define IOP_ADMA_SLOT_SIZE 32 -#define IOP_ADMA_THRESHOLD 4 - -/** - * struct iop_adma_device - internal representation of an ADMA device - * @pdev: Platform device - * @id: HW ADMA Device selector - * @dma_desc_pool: base of DMA descriptor region (DMA address) - * @dma_desc_pool_virt: base of DMA descriptor region (CPU address) - * @common: embedded struct dma_device - */ -struct iop_adma_device { - struct platform_device *pdev; - int id; - dma_addr_t dma_desc_pool; - void *dma_desc_pool_virt; - struct dma_device common; -}; - -/** - * struct iop_adma_chan - internal representation of an ADMA device - * @pending: allows batching of hardware operations - * @completed_cookie: identifier for the most recently completed operation - * @lock: serializes enqueue/dequeue operations to the slot pool - * @mmr_base: memory mapped register base - * @chain: device chain view of the descriptors - * @device: parent device - * @common: common dmaengine channel object members - * @last_used: place holder for allocation to continue from where it left off - * @all_slots: complete domain of slots usable by the channel - * @slots_allocated: records the actual size of the descriptor slot pool - * @irq_tasklet: bottom half where iop_adma_slot_cleanup runs - */ -struct iop_adma_chan { - int pending; - dma_cookie_t completed_cookie; - spinlock_t lock; /* protects the descriptor slot pool */ - void __iomem *mmr_base; - struct list_head chain; - struct iop_adma_device *device; - struct dma_chan common; - struct iop_adma_desc_slot *last_used; - struct list_head all_slots; - int slots_allocated; - struct tasklet_struct irq_tasklet; -}; - -/** - * struct iop_adma_desc_slot - IOP-ADMA software descriptor - * @slot_node: node on the iop_adma_chan.all_slots list - * @chain_node: node on the op_adma_chan.chain list - * @hw_desc: virtual address of the hardware descriptor chain - * @phys: hardware address of the hardware descriptor chain - * @group_head: first operation in a transaction - * @slot_cnt: total slots used in an transaction (group of operations) - * @slots_per_op: number of slots per operation - * @idx: pool index - * @unmap_src_cnt: number of xor sources - * @unmap_len: transaction bytecount - * @async_tx: support for the async_tx api - * @group_list: list of slots that make up a multi-descriptor transaction - * for example transfer lengths larger than the supported hw max - * @xor_check_result: result of zero sum - * @crc32_result: result crc calculation - */ -struct iop_adma_desc_slot { - struct list_head slot_node; - struct list_head chain_node; - void *hw_desc; - struct iop_adma_desc_slot *group_head; - u16 slot_cnt; - u16 slots_per_op; - u16 idx; - u16 unmap_src_cnt; - size_t unmap_len; - struct dma_async_tx_descriptor async_tx; - union { - u32 *xor_check_result; - u32 *crc32_result; - }; -}; - -struct iop_adma_platform_data { - int hw_id; - dma_cap_mask_t cap_mask; - size_t pool_size; -}; - -#define to_iop_sw_desc(addr_hw_desc) \ - container_of(addr_hw_desc, struct iop_adma_desc_slot, hw_desc) -#define iop_hw_desc_slot_idx(hw_desc, idx) \ - ( (void *) (((unsigned long) hw_desc) + ((idx) << 5)) ) -#endif diff --git a/include/asm-arm/hardware/it8152.h b/include/asm-arm/hardware/it8152.h deleted file mode 100644 index 74b5fff7f575..000000000000 --- a/include/asm-arm/hardware/it8152.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * linux/include/arm/hardware/it8152.h - * - * Copyright Compulab Ltd., 2006,2007 - * Mike Rapoport - * - * ITE 8152 companion chip register definitions - */ - -#ifndef __ASM_HARDWARE_IT8152_H -#define __ASM_HARDWARE_IT8152_H -extern unsigned long it8152_base_address; - -#define IT8152_IO_BASE (it8152_base_address + 0x03e00000) -#define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000) - -#define __REG_IT8152(x) (it8152_base_address + (x)) - -#define IT8152_PCI_CFG_ADDR __REG_IT8152(0x3f00800) -#define IT8152_PCI_CFG_DATA __REG_IT8152(0x3f00804) - -#define IT8152_INTC_LDCNIRR __REG_IT8152(0x3f00300) -#define IT8152_INTC_LDPNIRR __REG_IT8152(0x3f00304) -#define IT8152_INTC_LDCNIMR __REG_IT8152(0x3f00308) -#define IT8152_INTC_LDPNIMR __REG_IT8152(0x3f0030C) -#define IT8152_INTC_LDNITR __REG_IT8152(0x3f00310) -#define IT8152_INTC_LDNIAR __REG_IT8152(0x3f00314) -#define IT8152_INTC_LPCNIRR __REG_IT8152(0x3f00320) -#define IT8152_INTC_LPPNIRR __REG_IT8152(0x3f00324) -#define IT8152_INTC_LPCNIMR __REG_IT8152(0x3f00328) -#define IT8152_INTC_LPPNIMR __REG_IT8152(0x3f0032C) -#define IT8152_INTC_LPNITR __REG_IT8152(0x3f00330) -#define IT8152_INTC_LPNIAR __REG_IT8152(0x3f00334) -#define IT8152_INTC_PDCNIRR __REG_IT8152(0x3f00340) -#define IT8152_INTC_PDPNIRR __REG_IT8152(0x3f00344) -#define IT8152_INTC_PDCNIMR __REG_IT8152(0x3f00348) -#define IT8152_INTC_PDPNIMR __REG_IT8152(0x3f0034C) -#define IT8152_INTC_PDNITR __REG_IT8152(0x3f00350) -#define IT8152_INTC_PDNIAR __REG_IT8152(0x3f00354) -#define IT8152_INTC_INTC_TYPER __REG_IT8152(0x3f003FC) - -#define IT8152_GPIO_GPDR __REG_IT8152(0x3f00500) - -/* - Interrupt controller per register summary: - --------------------------------------- - LCDNIRR: - IT8152_LD_IRQ(8) PCICLK stop - IT8152_LD_IRQ(7) MCLK ready - IT8152_LD_IRQ(6) s/w - IT8152_LD_IRQ(5) UART - IT8152_LD_IRQ(4) GPIO - IT8152_LD_IRQ(3) TIMER 4 - IT8152_LD_IRQ(2) TIMER 3 - IT8152_LD_IRQ(1) TIMER 2 - IT8152_LD_IRQ(0) TIMER 1 - - LPCNIRR: - IT8152_LP_IRQ(x) serial IRQ x - - PCIDNIRR: - IT8152_PD_IRQ(14) PCISERR - IT8152_PD_IRQ(13) CPU/PCI bridge target abort (h2pTADR) - IT8152_PD_IRQ(12) CPU/PCI bridge master abort (h2pMADR) - IT8152_PD_IRQ(11) PCI INTD - IT8152_PD_IRQ(10) PCI INTC - IT8152_PD_IRQ(9) PCI INTB - IT8152_PD_IRQ(8) PCI INTA - IT8152_PD_IRQ(7) serial INTD - IT8152_PD_IRQ(6) serial INTC - IT8152_PD_IRQ(5) serial INTB - IT8152_PD_IRQ(4) serial INTA - IT8152_PD_IRQ(3) serial IRQ IOCHK (IOCHKR) - IT8152_PD_IRQ(2) chaining DMA (CDMAR) - IT8152_PD_IRQ(1) USB (USBR) - IT8152_PD_IRQ(0) Audio controller (ACR) - */ -/* frequently used interrupts */ -#define IT8152_PCISERR IT8152_PD_IRQ(14) -#define IT8152_H2PTADR IT8152_PD_IRQ(13) -#define IT8152_H2PMAR IT8152_PD_IRQ(12) -#define IT8152_PCI_INTD IT8152_PD_IRQ(11) -#define IT8152_PCI_INTC IT8152_PD_IRQ(10) -#define IT8152_PCI_INTB IT8152_PD_IRQ(9) -#define IT8152_PCI_INTA IT8152_PD_IRQ(8) -#define IT8152_CDMA_INT IT8152_PD_IRQ(2) -#define IT8152_USB_INT IT8152_PD_IRQ(1) -#define IT8152_AUDIO_INT IT8152_PD_IRQ(0) - -struct pci_dev; -struct pci_sys_data; - -extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc); -extern void it8152_init_irq(void); -extern int it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin); -extern int it8152_pci_setup(int nr, struct pci_sys_data *sys); -extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys); - -#endif /* __ASM_HARDWARE_IT8152_H */ diff --git a/include/asm-arm/hardware/linkup-l1110.h b/include/asm-arm/hardware/linkup-l1110.h deleted file mode 100644 index 7ec91168a576..000000000000 --- a/include/asm-arm/hardware/linkup-l1110.h +++ /dev/null @@ -1,48 +0,0 @@ -/* -* -* Definitions for H3600 Handheld Computer -* -* Copyright 2001 Compaq Computer Corporation. -* -* Use consistent with the GNU GPL is permitted, -* provided that this copyright notice is -* preserved in its entirety in all copies and derived works. -* -* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, -* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS -* FITNESS FOR ANY PARTICULAR PURPOSE. -* -* Author: Jamey Hicks. -* -*/ - -/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */ - -/* PC Card Status Register */ -#define LINKUP_PRS_S1 (1 << 0) /* voltage control bits S1-S4 */ -#define LINKUP_PRS_S2 (1 << 1) -#define LINKUP_PRS_S3 (1 << 2) -#define LINKUP_PRS_S4 (1 << 3) -#define LINKUP_PRS_BVD1 (1 << 4) -#define LINKUP_PRS_BVD2 (1 << 5) -#define LINKUP_PRS_VS1 (1 << 6) -#define LINKUP_PRS_VS2 (1 << 7) -#define LINKUP_PRS_RDY (1 << 8) -#define LINKUP_PRS_CD1 (1 << 9) -#define LINKUP_PRS_CD2 (1 << 10) - -/* PC Card Command Register */ -#define LINKUP_PRC_S1 (1 << 0) -#define LINKUP_PRC_S2 (1 << 1) -#define LINKUP_PRC_S3 (1 << 2) -#define LINKUP_PRC_S4 (1 << 3) -#define LINKUP_PRC_RESET (1 << 4) -#define LINKUP_PRC_APOE (1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */ -#define LINKUP_PRC_CFE (1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */ -#define LINKUP_PRC_SOE (1 << 7) /* signal output driver enable */ -#define LINKUP_PRC_SSP (1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */ -#define LINKUP_PRC_MBZ (1 << 15) /* must be zero */ - -struct linkup_l1110 { - volatile short prc; -}; diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h deleted file mode 100644 index fb0645de6f31..000000000000 --- a/include/asm-arm/hardware/locomo.h +++ /dev/null @@ -1,217 +0,0 @@ -/* - * linux/include/asm-arm/hardware/locomo.h - * - * This file contains the definitions for the LoCoMo G/A Chip - * - * (C) Copyright 2004 John Lenz - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Based on sa1111.h - */ -#ifndef _ASM_ARCH_LOCOMO -#define _ASM_ARCH_LOCOMO - -#define locomo_writel(val,addr) ({ *(volatile u16 *)(addr) = (val); }) -#define locomo_readl(addr) (*(volatile u16 *)(addr)) - -/* LOCOMO version */ -#define LOCOMO_VER 0x00 - -/* Pin status */ -#define LOCOMO_ST 0x04 - -/* Pin status */ -#define LOCOMO_C32K 0x08 - -/* Interrupt controller */ -#define LOCOMO_ICR 0x0C - -/* MCS decoder for boot selecting */ -#define LOCOMO_MCSX0 0x10 -#define LOCOMO_MCSX1 0x14 -#define LOCOMO_MCSX2 0x18 -#define LOCOMO_MCSX3 0x1c - -/* Touch panel controller */ -#define LOCOMO_ASD 0x20 /* AD start delay */ -#define LOCOMO_HSD 0x28 /* HSYS delay */ -#define LOCOMO_HSC 0x2c /* HSYS period */ -#define LOCOMO_TADC 0x30 /* tablet ADC clock */ - - -/* Long time timer */ -#define LOCOMO_LTC 0xd8 /* LTC interrupt setting */ -#define LOCOMO_LTINT 0xdc /* LTC interrupt */ - -/* DAC control signal for LCD (COMADJ ) */ -#define LOCOMO_DAC 0xe0 -/* DAC control */ -#define LOCOMO_DAC_SCLOEB 0x08 /* SCL pin output data */ -#define LOCOMO_DAC_TEST 0x04 /* Test bit */ -#define LOCOMO_DAC_SDA 0x02 /* SDA pin level (read-only) */ -#define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */ - -/* SPI interface */ -#define LOCOMO_SPI 0x60 -#define LOCOMO_SPIMD 0x00 /* SPI mode setting */ -#define LOCOMO_SPICT 0x04 /* SPI mode control */ -#define LOCOMO_SPIST 0x08 /* SPI status */ -#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */ -#define LOCOMO_SPI_REND (1 << 2) /* Receive end bit */ -#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */ -#define LOCOMO_SPI_RFR (1) /* read buffer bit */ - -#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */ -#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */ -#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */ -#define LOCOMO_SPIIR 0x1c /* SPI interrupt request */ -#define LOCOMO_SPITD 0x20 /* SPI transfer data write */ -#define LOCOMO_SPIRD 0x24 /* SPI receive data read */ -#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */ -#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */ - -/* GPIO */ -#define LOCOMO_GPD 0x90 /* GPIO direction */ -#define LOCOMO_GPE 0x94 /* GPIO input enable */ -#define LOCOMO_GPL 0x98 /* GPIO level */ -#define LOCOMO_GPO 0x9c /* GPIO out data setting */ -#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */ -#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */ -#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */ -#define LOCOMO_GWE 0xac /* GPIO status write enable */ -#define LOCOMO_GIE 0xb0 /* GPIO interrupt enable */ -#define LOCOMO_GIR 0xb4 /* GPIO interrupt request */ -#define LOCOMO_GPIO(Nb) (0x01 << (Nb)) -#define LOCOMO_GPIO_RTS LOCOMO_GPIO(0) -#define LOCOMO_GPIO_CTS LOCOMO_GPIO(1) -#define LOCOMO_GPIO_DSR LOCOMO_GPIO(2) -#define LOCOMO_GPIO_DTR LOCOMO_GPIO(3) -#define LOCOMO_GPIO_LCD_VSHA_ON LOCOMO_GPIO(4) -#define LOCOMO_GPIO_LCD_VSHD_ON LOCOMO_GPIO(5) -#define LOCOMO_GPIO_LCD_VEE_ON LOCOMO_GPIO(6) -#define LOCOMO_GPIO_LCD_MOD LOCOMO_GPIO(7) -#define LOCOMO_GPIO_DAC_ON LOCOMO_GPIO(8) -#define LOCOMO_GPIO_FL_VR LOCOMO_GPIO(9) -#define LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10) -#define LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11) -#define LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12) -#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13) -#define LOCOMO_GPIO_WRITE_PROT LOCOMO_GPIO(14) -#define LOCOMO_GPIO_CARD_POWER LOCOMO_GPIO(15) - -/* Start the definitions of the devices. Each device has an initial - * base address and a series of offsets from that base address. */ - -/* Keyboard controller */ -#define LOCOMO_KEYBOARD 0x40 -#define LOCOMO_KIB 0x00 /* KIB level */ -#define LOCOMO_KSC 0x04 /* KSTRB control */ -#define LOCOMO_KCMD 0x08 /* KSTRB command */ -#define LOCOMO_KIC 0x0c /* Key interrupt */ - -/* Front light adjustment controller */ -#define LOCOMO_FRONTLIGHT 0xc8 -#define LOCOMO_ALS 0x00 /* Adjust light cycle */ -#define LOCOMO_ALD 0x04 /* Adjust light duty */ - -#define LOCOMO_ALC_EN 0x8000 - -/* Backlight controller: TFT signal */ -#define LOCOMO_BACKLIGHT 0x38 -#define LOCOMO_TC 0x00 /* TFT control signal */ -#define LOCOMO_CPSD 0x04 /* CPS delay */ - -/* Audio controller */ -#define LOCOMO_AUDIO 0x54 -#define LOCOMO_ACC 0x00 /* Audio clock */ -#define LOCOMO_PAIF 0xD0 /* PCM audio interface */ -/* Audio clock */ -#define LOCOMO_ACC_XON 0x80 -#define LOCOMO_ACC_XEN 0x40 -#define LOCOMO_ACC_XSEL0 0x00 -#define LOCOMO_ACC_XSEL1 0x20 -#define LOCOMO_ACC_MCLKEN 0x10 -#define LOCOMO_ACC_64FSEN 0x08 -#define LOCOMO_ACC_CLKSEL000 0x00 /* mclk 2 */ -#define LOCOMO_ACC_CLKSEL001 0x01 /* mclk 3 */ -#define LOCOMO_ACC_CLKSEL010 0x02 /* mclk 4 */ -#define LOCOMO_ACC_CLKSEL011 0x03 /* mclk 6 */ -#define LOCOMO_ACC_CLKSEL100 0x04 /* mclk 8 */ -#define LOCOMO_ACC_CLKSEL101 0x05 /* mclk 12 */ -/* PCM audio interface */ -#define LOCOMO_PAIF_SCINV 0x20 -#define LOCOMO_PAIF_SCEN 0x10 -#define LOCOMO_PAIF_LRCRST 0x08 -#define LOCOMO_PAIF_LRCEVE 0x04 -#define LOCOMO_PAIF_LRCINV 0x02 -#define LOCOMO_PAIF_LRCEN 0x01 - -/* LED controller */ -#define LOCOMO_LED 0xe8 -#define LOCOMO_LPT0 0x00 -#define LOCOMO_LPT1 0x04 -/* LED control */ -#define LOCOMO_LPT_TOFH 0x80 -#define LOCOMO_LPT_TOFL 0x08 -#define LOCOMO_LPT_TOH(TOH) ((TOH & 0x7) << 4) -#define LOCOMO_LPT_TOL(TOL) ((TOL & 0x7)) - -extern struct bus_type locomo_bus_type; - -#define LOCOMO_DEVID_KEYBOARD 0 -#define LOCOMO_DEVID_FRONTLIGHT 1 -#define LOCOMO_DEVID_BACKLIGHT 2 -#define LOCOMO_DEVID_AUDIO 3 -#define LOCOMO_DEVID_LED 4 -#define LOCOMO_DEVID_UART 5 -#define LOCOMO_DEVID_SPI 6 - -struct locomo_dev { - struct device dev; - unsigned int devid; - unsigned int irq[1]; - - void *mapbase; - unsigned long length; - - u64 dma_mask; -}; - -#define LOCOMO_DEV(_d) container_of((_d), struct locomo_dev, dev) - -#define locomo_get_drvdata(d) dev_get_drvdata(&(d)->dev) -#define locomo_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p) - -struct locomo_driver { - struct device_driver drv; - unsigned int devid; - int (*probe)(struct locomo_dev *); - int (*remove)(struct locomo_dev *); - int (*suspend)(struct locomo_dev *, pm_message_t); - int (*resume)(struct locomo_dev *); -}; - -#define LOCOMO_DRV(_d) container_of((_d), struct locomo_driver, drv) - -#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name) - -void locomo_lcd_power(struct locomo_dev *, int, unsigned int); - -int locomo_driver_register(struct locomo_driver *); -void locomo_driver_unregister(struct locomo_driver *); - -/* GPIO control functions */ -void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir); -int locomo_gpio_read_level(struct device *dev, unsigned int bits); -int locomo_gpio_read_output(struct device *dev, unsigned int bits); -void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set); - -/* M62332 control function */ -void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel); - -/* Frontlight control */ -void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf); - -#endif diff --git a/include/asm-arm/hardware/memc.h b/include/asm-arm/hardware/memc.h deleted file mode 100644 index 8aef5aa0e01b..000000000000 --- a/include/asm-arm/hardware/memc.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/hardware/memc.h - * - * Copyright (C) Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define VDMA_ALIGNMENT PAGE_SIZE -#define VDMA_XFERSIZE 16 -#define VDMA_INIT 0 -#define VDMA_START 1 -#define VDMA_END 2 - -#ifndef __ASSEMBLY__ -extern void memc_write(unsigned int reg, unsigned long val); - -#define video_set_dma(start,end,offset) \ -do { \ - memc_write (VDMA_START, (start >> 2)); \ - memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2); \ - memc_write (VDMA_INIT, (offset >> 2)); \ -} while (0) - -#endif diff --git a/include/asm-arm/hardware/pci_v3.h b/include/asm-arm/hardware/pci_v3.h deleted file mode 100644 index 4d497bdb9a97..000000000000 --- a/include/asm-arm/hardware/pci_v3.h +++ /dev/null @@ -1,186 +0,0 @@ -/* - * linux/include/asm-arm/hardware/pci_v3.h - * - * Internal header file PCI V3 chip - * - * Copyright (C) ARM Limited - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef ASM_ARM_HARDWARE_PCI_V3_H -#define ASM_ARM_HARDWARE_PCI_V3_H - -/* ------------------------------------------------------------------------------- - * V3 Local Bus to PCI Bridge definitions - * ------------------------------------------------------------------------------- - * Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04 - * All V3 register names are prefaced by V3_ to avoid clashing with any other - * PCI definitions. Their names match the user's manual. - * - * I'm assuming that I20 is disabled. - * - */ -#define V3_PCI_VENDOR 0x00000000 -#define V3_PCI_DEVICE 0x00000002 -#define V3_PCI_CMD 0x00000004 -#define V3_PCI_STAT 0x00000006 -#define V3_PCI_CC_REV 0x00000008 -#define V3_PCI_HDR_CFG 0x0000000C -#define V3_PCI_IO_BASE 0x00000010 -#define V3_PCI_BASE0 0x00000014 -#define V3_PCI_BASE1 0x00000018 -#define V3_PCI_SUB_VENDOR 0x0000002C -#define V3_PCI_SUB_ID 0x0000002E -#define V3_PCI_ROM 0x00000030 -#define V3_PCI_BPARAM 0x0000003C -#define V3_PCI_MAP0 0x00000040 -#define V3_PCI_MAP1 0x00000044 -#define V3_PCI_INT_STAT 0x00000048 -#define V3_PCI_INT_CFG 0x0000004C -#define V3_LB_BASE0 0x00000054 -#define V3_LB_BASE1 0x00000058 -#define V3_LB_MAP0 0x0000005E -#define V3_LB_MAP1 0x00000062 -#define V3_LB_BASE2 0x00000064 -#define V3_LB_MAP2 0x00000066 -#define V3_LB_SIZE 0x00000068 -#define V3_LB_IO_BASE 0x0000006E -#define V3_FIFO_CFG 0x00000070 -#define V3_FIFO_PRIORITY 0x00000072 -#define V3_FIFO_STAT 0x00000074 -#define V3_LB_ISTAT 0x00000076 -#define V3_LB_IMASK 0x00000077 -#define V3_SYSTEM 0x00000078 -#define V3_LB_CFG 0x0000007A -#define V3_PCI_CFG 0x0000007C -#define V3_DMA_PCI_ADR0 0x00000080 -#define V3_DMA_PCI_ADR1 0x00000090 -#define V3_DMA_LOCAL_ADR0 0x00000084 -#define V3_DMA_LOCAL_ADR1 0x00000094 -#define V3_DMA_LENGTH0 0x00000088 -#define V3_DMA_LENGTH1 0x00000098 -#define V3_DMA_CSR0 0x0000008B -#define V3_DMA_CSR1 0x0000009B -#define V3_DMA_CTLB_ADR0 0x0000008C -#define V3_DMA_CTLB_ADR1 0x0000009C -#define V3_DMA_DELAY 0x000000E0 -#define V3_MAIL_DATA 0x000000C0 -#define V3_PCI_MAIL_IEWR 0x000000D0 -#define V3_PCI_MAIL_IERD 0x000000D2 -#define V3_LB_MAIL_IEWR 0x000000D4 -#define V3_LB_MAIL_IERD 0x000000D6 -#define V3_MAIL_WR_STAT 0x000000D8 -#define V3_MAIL_RD_STAT 0x000000DA -#define V3_QBA_MAP 0x000000DC - -/* PCI COMMAND REGISTER bits - */ -#define V3_COMMAND_M_FBB_EN (1 << 9) -#define V3_COMMAND_M_SERR_EN (1 << 8) -#define V3_COMMAND_M_PAR_EN (1 << 6) -#define V3_COMMAND_M_MASTER_EN (1 << 2) -#define V3_COMMAND_M_MEM_EN (1 << 1) -#define V3_COMMAND_M_IO_EN (1 << 0) - -/* SYSTEM REGISTER bits - */ -#define V3_SYSTEM_M_RST_OUT (1 << 15) -#define V3_SYSTEM_M_LOCK (1 << 14) - -/* PCI_CFG bits - */ -#define V3_PCI_CFG_M_I2O_EN (1 << 15) -#define V3_PCI_CFG_M_IO_REG_DIS (1 << 14) -#define V3_PCI_CFG_M_IO_DIS (1 << 13) -#define V3_PCI_CFG_M_EN3V (1 << 12) -#define V3_PCI_CFG_M_RETRY_EN (1 << 10) -#define V3_PCI_CFG_M_AD_LOW1 (1 << 9) -#define V3_PCI_CFG_M_AD_LOW0 (1 << 8) - -/* PCI_BASE register bits (PCI -> Local Bus) - */ -#define V3_PCI_BASE_M_ADR_BASE 0xFFF00000 -#define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00 -#define V3_PCI_BASE_M_PREFETCH (1 << 3) -#define V3_PCI_BASE_M_TYPE (3 << 1) -#define V3_PCI_BASE_M_IO (1 << 0) - -/* PCI MAP register bits (PCI -> Local bus) - */ -#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000 -#define V3_PCI_MAP_M_RD_POST_INH (1 << 15) -#define V3_PCI_MAP_M_ROM_SIZE (3 << 10) -#define V3_PCI_MAP_M_SWAP (3 << 8) -#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0 -#define V3_PCI_MAP_M_REG_EN (1 << 1) -#define V3_PCI_MAP_M_ENABLE (1 << 0) - -/* - * LB_BASE0,1 register bits (Local bus -> PCI) - */ -#define V3_LB_BASE_ADR_BASE 0xfff00000 -#define V3_LB_BASE_SWAP (3 << 8) -#define V3_LB_BASE_ADR_SIZE (15 << 4) -#define V3_LB_BASE_PREFETCH (1 << 3) -#define V3_LB_BASE_ENABLE (1 << 0) - -#define V3_LB_BASE_ADR_SIZE_1MB (0 << 4) -#define V3_LB_BASE_ADR_SIZE_2MB (1 << 4) -#define V3_LB_BASE_ADR_SIZE_4MB (2 << 4) -#define V3_LB_BASE_ADR_SIZE_8MB (3 << 4) -#define V3_LB_BASE_ADR_SIZE_16MB (4 << 4) -#define V3_LB_BASE_ADR_SIZE_32MB (5 << 4) -#define V3_LB_BASE_ADR_SIZE_64MB (6 << 4) -#define V3_LB_BASE_ADR_SIZE_128MB (7 << 4) -#define V3_LB_BASE_ADR_SIZE_256MB (8 << 4) -#define V3_LB_BASE_ADR_SIZE_512MB (9 << 4) -#define V3_LB_BASE_ADR_SIZE_1GB (10 << 4) -#define V3_LB_BASE_ADR_SIZE_2GB (11 << 4) - -#define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE) - -/* - * LB_MAP0,1 register bits (Local bus -> PCI) - */ -#define V3_LB_MAP_MAP_ADR 0xfff0 -#define V3_LB_MAP_TYPE (7 << 1) -#define V3_LB_MAP_AD_LOW_EN (1 << 0) - -#define V3_LB_MAP_TYPE_IACK (0 << 1) -#define V3_LB_MAP_TYPE_IO (1 << 1) -#define V3_LB_MAP_TYPE_MEM (3 << 1) -#define V3_LB_MAP_TYPE_CONFIG (5 << 1) -#define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1) - -#define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR) - -/* - * LB_BASE2 register bits (Local bus -> PCI IO) - */ -#define V3_LB_BASE2_ADR_BASE 0xff00 -#define V3_LB_BASE2_SWAP (3 << 6) -#define V3_LB_BASE2_ENABLE (1 << 0) - -#define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE) - -/* - * LB_MAP2 register bits (Local bus -> PCI IO) - */ -#define V3_LB_MAP2_MAP_ADR 0xff00 - -#define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR) - -#endif diff --git a/include/asm-arm/hardware/sa1111.h b/include/asm-arm/hardware/sa1111.h deleted file mode 100644 index 61b1d05c7df7..000000000000 --- a/include/asm-arm/hardware/sa1111.h +++ /dev/null @@ -1,581 +0,0 @@ -/* - * linux/include/asm-arm/hardware/sa1111.h - * - * Copyright (C) 2000 John G Dorsey - * - * This file contains definitions for the SA-1111 Companion Chip. - * (Structure and naming borrowed from SA-1101.h, by Peter Danielsson.) - * - * Macro that calculates real address for registers in the SA-1111 - */ - -#ifndef _ASM_ARCH_SA1111 -#define _ASM_ARCH_SA1111 - -#include - -/* - * The SA1111 is always located at virtual 0xf4000000, and is always - * "native" endian. - */ - -#define SA1111_VBASE 0xf4000000 - -/* Don't use these! */ -#define SA1111_p2v( x ) ((x) - SA1111_BASE + SA1111_VBASE) -#define SA1111_v2p( x ) ((x) - SA1111_VBASE + SA1111_BASE) - -#ifndef __ASSEMBLY__ -#define _SA1111(x) ((x) + sa1111->resource.start) -#endif - -#define sa1111_writel(val,addr) __raw_writel(val, addr) -#define sa1111_readl(addr) __raw_readl(addr) - -/* - * 26 bits of the SA-1110 address bus are available to the SA-1111. - * Use these when feeding target addresses to the DMA engines. - */ - -#define SA1111_ADDR_WIDTH (26) -#define SA1111_ADDR_MASK ((1<dev) -#define sa1111_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p) - -struct sa1111_driver { - struct device_driver drv; - unsigned int devid; - int (*probe)(struct sa1111_dev *); - int (*remove)(struct sa1111_dev *); - int (*suspend)(struct sa1111_dev *, pm_message_t); - int (*resume)(struct sa1111_dev *); -}; - -#define SA1111_DRV(_d) container_of((_d), struct sa1111_driver, drv) - -#define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name) - -/* - * These frob the SKPCR register. - */ -void sa1111_enable_device(struct sa1111_dev *); -void sa1111_disable_device(struct sa1111_dev *); - -unsigned int sa1111_pll_clock(struct sa1111_dev *); - -#define SA1111_AUDIO_ACLINK 0 -#define SA1111_AUDIO_I2S 1 - -void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode); -int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate); -int sa1111_get_audio_rate(struct sa1111_dev *sadev); - -int sa1111_check_dma_bug(dma_addr_t addr); - -int sa1111_driver_register(struct sa1111_driver *); -void sa1111_driver_unregister(struct sa1111_driver *); - -void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int dir, unsigned int sleep_dir); -void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v); -void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v); - -#endif /* _ASM_ARCH_SA1111 */ diff --git a/include/asm-arm/hardware/scoop.h b/include/asm-arm/hardware/scoop.h deleted file mode 100644 index dfb8330599f9..000000000000 --- a/include/asm-arm/hardware/scoop.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Definitions for the SCOOP interface found on various Sharp PDAs - * - * Copyright (c) 2004 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#define SCOOP_MCR 0x00 -#define SCOOP_CDR 0x04 -#define SCOOP_CSR 0x08 -#define SCOOP_CPR 0x0C -#define SCOOP_CCR 0x10 -#define SCOOP_IRR 0x14 -#define SCOOP_IRM 0x14 -#define SCOOP_IMR 0x18 -#define SCOOP_ISR 0x1C -#define SCOOP_GPCR 0x20 -#define SCOOP_GPWR 0x24 -#define SCOOP_GPRR 0x28 - -#define SCOOP_GPCR_PA22 ( 1 << 12 ) -#define SCOOP_GPCR_PA21 ( 1 << 11 ) -#define SCOOP_GPCR_PA20 ( 1 << 10 ) -#define SCOOP_GPCR_PA19 ( 1 << 9 ) -#define SCOOP_GPCR_PA18 ( 1 << 8 ) -#define SCOOP_GPCR_PA17 ( 1 << 7 ) -#define SCOOP_GPCR_PA16 ( 1 << 6 ) -#define SCOOP_GPCR_PA15 ( 1 << 5 ) -#define SCOOP_GPCR_PA14 ( 1 << 4 ) -#define SCOOP_GPCR_PA13 ( 1 << 3 ) -#define SCOOP_GPCR_PA12 ( 1 << 2 ) -#define SCOOP_GPCR_PA11 ( 1 << 1 ) - -struct scoop_config { - unsigned short io_out; - unsigned short io_dir; - unsigned short suspend_clr; - unsigned short suspend_set; - int gpio_base; -}; - -/* Structure for linking scoop devices to PCMCIA sockets */ -struct scoop_pcmcia_dev { - struct device *dev; /* Pointer to this socket's scoop device */ - int irq; /* irq for socket */ - int cd_irq; - const char *cd_irq_str; - unsigned char keep_vs; - unsigned char keep_rd; -}; - -struct scoop_pcmcia_config { - struct scoop_pcmcia_dev *devs; - int num_devs; - void (*pcmcia_init)(void); - void (*power_ctrl)(struct device *scoop, unsigned short cpr, int nr); -}; - -extern struct scoop_pcmcia_config *platform_scoop_config; - -void reset_scoop(struct device *dev); -unsigned short __deprecated set_scoop_gpio(struct device *dev, unsigned short bit); -unsigned short __deprecated reset_scoop_gpio(struct device *dev, unsigned short bit); -unsigned short read_scoop_reg(struct device *dev, unsigned short reg); -void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data); diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/include/asm-arm/hardware/sharpsl_pm.h deleted file mode 100644 index 2d00db22b981..000000000000 --- a/include/asm-arm/hardware/sharpsl_pm.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * SharpSL Battery/PM Driver - * - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include - -struct sharpsl_charger_machinfo { - void (*init)(void); - void (*exit)(void); - int gpio_acin; - int gpio_batfull; - int batfull_irq; - int gpio_batlock; - int gpio_fatal; - void (*discharge)(int); - void (*discharge1)(int); - void (*charge)(int); - void (*measure_temp)(int); - void (*presuspend)(void); - void (*postsuspend)(void); - void (*earlyresume)(void); - unsigned long (*read_devdata)(int); -#define SHARPSL_BATT_VOLT 1 -#define SHARPSL_BATT_TEMP 2 -#define SHARPSL_ACIN_VOLT 3 -#define SHARPSL_STATUS_ACIN 4 -#define SHARPSL_STATUS_LOCK 5 -#define SHARPSL_STATUS_CHRGFULL 6 -#define SHARPSL_STATUS_FATAL 7 - unsigned long (*charger_wakeup)(void); - int (*should_wakeup)(unsigned int resume_on_alarm); - void (*backlight_limit)(int); - int (*backlight_get_status) (void); - int charge_on_volt; - int charge_on_temp; - int charge_acin_high; - int charge_acin_low; - int fatal_acin_volt; - int fatal_noacin_volt; - int bat_levels; - struct battery_thresh *bat_levels_noac; - struct battery_thresh *bat_levels_acin; - struct battery_thresh *bat_levels_noac_bl; - struct battery_thresh *bat_levels_acin_bl; - int status_high_acin; - int status_low_acin; - int status_high_noac; - int status_low_noac; -}; - -struct battery_thresh { - int voltage; - int percentage; -}; - -struct battery_stat { - int ac_status; /* APM AC Present/Not Present */ - int mainbat_status; /* APM Main Battery Status */ - int mainbat_percent; /* Main Battery Percentage Charge */ - int mainbat_voltage; /* Main Battery Voltage */ -}; - -struct sharpsl_pm_status { - struct device *dev; - struct timer_list ac_timer; - struct timer_list chrg_full_timer; - - int charge_mode; -#define CHRG_ERROR (-1) -#define CHRG_OFF (0) -#define CHRG_ON (1) -#define CHRG_DONE (2) - - unsigned int flags; -#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */ -#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */ -#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */ -#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */ -#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */ - - int full_count; - unsigned long charge_start_time; - struct sharpsl_charger_machinfo *machinfo; - struct battery_stat battstat; -}; - -extern struct sharpsl_pm_status sharpsl_pm; - - -#define SHARPSL_LED_ERROR 2 -#define SHARPSL_LED_ON 1 -#define SHARPSL_LED_OFF 0 - -void sharpsl_battery_kick(void); -void sharpsl_pm_led(int val); -irqreturn_t sharpsl_ac_isr(int irq, void *dev_id); -irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id); -irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id); - diff --git a/include/asm-arm/hardware/ssp.h b/include/asm-arm/hardware/ssp.h deleted file mode 100644 index 3b42e181997c..000000000000 --- a/include/asm-arm/hardware/ssp.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * ssp.h - * - * Copyright (C) 2003 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef SSP_H -#define SSP_H - -struct ssp_state { - unsigned int cr0; - unsigned int cr1; -}; - -int ssp_write_word(u16 data); -int ssp_read_word(u16 *data); -int ssp_flush(void); -void ssp_enable(void); -void ssp_disable(void); -void ssp_save_state(struct ssp_state *ssp); -void ssp_restore_state(struct ssp_state *ssp); -int ssp_init(void); -void ssp_exit(void); - -#endif diff --git a/include/asm-arm/hardware/uengine.h b/include/asm-arm/hardware/uengine.h deleted file mode 100644 index b442d65c6593..000000000000 --- a/include/asm-arm/hardware/uengine.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Generic library functions for the microengines found on the Intel - * IXP2000 series of network processors. - * - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as - * published by the Free Software Foundation; either version 2.1 of the - * License, or (at your option) any later version. - */ - -#ifndef __IXP2000_UENGINE_H -#define __IXP2000_UENGINE_H - -extern u32 ixp2000_uengine_mask; - -struct ixp2000_uengine_code -{ - u32 cpu_model_bitmask; - u8 cpu_min_revision; - u8 cpu_max_revision; - - u32 uengine_parameters; - - struct ixp2000_reg_value { - int reg; - u32 value; - } *initial_reg_values; - - int num_insns; - u8 *insns; -}; - -u32 ixp2000_uengine_csr_read(int uengine, int offset); -void ixp2000_uengine_csr_write(int uengine, int offset, u32 value); -void ixp2000_uengine_reset(u32 uengine_mask); -void ixp2000_uengine_set_mode(int uengine, u32 mode); -void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns); -void ixp2000_uengine_init_context(int uengine, int context, int pc); -void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask); -void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask); -int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c); - -#define IXP2000_UENGINE_8_CONTEXTS 0x00000000 -#define IXP2000_UENGINE_4_CONTEXTS 0x80000000 -#define IXP2000_UENGINE_PRN_UPDATE_EVERY 0x40000000 -#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS 0x00000000 -#define IXP2000_UENGINE_NN_FROM_SELF 0x00100000 -#define IXP2000_UENGINE_NN_FROM_PREVIOUS 0x00000000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3 0x000c0000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2 0x00080000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1 0x00040000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0 0x00000000 -#define IXP2000_UENGINE_LM_ADDR1_GLOBAL 0x00020000 -#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT 0x00000000 -#define IXP2000_UENGINE_LM_ADDR0_GLOBAL 0x00010000 -#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT 0x00000000 - - -#endif diff --git a/include/asm-arm/hardware/vic.h b/include/asm-arm/hardware/vic.h deleted file mode 100644 index ed9ca3736a0b..000000000000 --- a/include/asm-arm/hardware/vic.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/include/asm-arm/hardware/vic.h - * - * Copyright (c) ARM Limited 2003. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_HARDWARE_VIC_H -#define __ASM_ARM_HARDWARE_VIC_H - -#define VIC_IRQ_STATUS 0x00 -#define VIC_FIQ_STATUS 0x04 -#define VIC_RAW_STATUS 0x08 -#define VIC_INT_SELECT 0x0c /* 1 = FIQ, 0 = IRQ */ -#define VIC_INT_ENABLE 0x10 /* 1 = enable, 0 = disable */ -#define VIC_INT_ENABLE_CLEAR 0x14 -#define VIC_INT_SOFT 0x18 -#define VIC_INT_SOFT_CLEAR 0x1c -#define VIC_PROTECT 0x20 -#define VIC_VECT_ADDR 0x30 -#define VIC_DEF_VECT_ADDR 0x34 - -#define VIC_VECT_ADDR0 0x100 /* 0 to 15 */ -#define VIC_VECT_CNTL0 0x200 /* 0 to 15 */ -#define VIC_ITCR 0x300 /* VIC test control register */ - -#define VIC_VECT_CNTL_ENABLE (1 << 5) - -#ifndef __ASSEMBLY__ -void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources); -#endif - -#endif diff --git a/include/asm-arm/hw_irq.h b/include/asm-arm/hw_irq.h deleted file mode 100644 index f1a08a500604..000000000000 --- a/include/asm-arm/hw_irq.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Nothing to see here yet - */ -#ifndef _ARCH_ARM_HW_IRQ_H -#define _ARCH_ARM_HW_IRQ_H - -#include - -#endif diff --git a/include/asm-arm/hwcap.h b/include/asm-arm/hwcap.h deleted file mode 100644 index 81f4c899a555..000000000000 --- a/include/asm-arm/hwcap.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __ASMARM_HWCAP_H -#define __ASMARM_HWCAP_H - -/* - * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP - */ -#define HWCAP_SWP 1 -#define HWCAP_HALF 2 -#define HWCAP_THUMB 4 -#define HWCAP_26BIT 8 /* Play it safe */ -#define HWCAP_FAST_MULT 16 -#define HWCAP_FPA 32 -#define HWCAP_VFP 64 -#define HWCAP_EDSP 128 -#define HWCAP_JAVA 256 -#define HWCAP_IWMMXT 512 -#define HWCAP_CRUNCH 1024 -#define HWCAP_THUMBEE 2048 - -#if defined(__KERNEL__) && !defined(__ASSEMBLY__) -/* - * This yields a mask that user programs can use to figure out what - * instruction set this cpu supports. - */ -#define ELF_HWCAP (elf_hwcap) -extern unsigned int elf_hwcap; -#endif - -#endif diff --git a/include/asm-arm/ide.h b/include/asm-arm/ide.h deleted file mode 100644 index a48019f99d08..000000000000 --- a/include/asm-arm/ide.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm-arm/ide.h - * - * Copyright (C) 1994-1996 Linus Torvalds & authors - */ - -/* - * This file contains the ARM architecture specific IDE code. - */ - -#ifndef __ASMARM_IDE_H -#define __ASMARM_IDE_H - -#ifdef __KERNEL__ - -#define __ide_mm_insw(port,addr,len) readsw(port,addr,len) -#define __ide_mm_insl(port,addr,len) readsl(port,addr,len) -#define __ide_mm_outsw(port,addr,len) writesw(port,addr,len) -#define __ide_mm_outsl(port,addr,len) writesl(port,addr,len) - -#endif /* __KERNEL__ */ - -#endif /* __ASMARM_IDE_H */ diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h deleted file mode 100644 index eebe56e74d6d..000000000000 --- a/include/asm-arm/io.h +++ /dev/null @@ -1,287 +0,0 @@ -/* - * linux/include/asm-arm/io.h - * - * Copyright (C) 1996-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 16-Sep-1996 RMK Inlined the inx/outx functions & optimised for both - * constant addresses and variable addresses. - * 04-Dec-1997 RMK Moved a lot of this stuff to the new architecture - * specific IO header files. - * 27-Mar-1999 PJB Second parameter of memcpy_toio is const.. - * 04-Apr-1999 PJB Added check_signature. - * 12-Dec-1999 RMK More cleanups - * 18-Jun-2000 RMK Removed virt_to_* and friends definitions - * 05-Oct-2004 BJD Moved memory string functions to use void __iomem - */ -#ifndef __ASM_ARM_IO_H -#define __ASM_ARM_IO_H - -#ifdef __KERNEL__ - -#include -#include -#include - -/* - * ISA I/O bus memory addresses are 1:1 with the physical address. - */ -#define isa_virt_to_bus virt_to_phys -#define isa_page_to_bus page_to_phys -#define isa_bus_to_virt phys_to_virt - -/* - * Generic IO read/write. These perform native-endian accesses. Note - * that some architectures will want to re-define __raw_{read,write}w. - */ -extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen); -extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen); -extern void __raw_writesl(void __iomem *addr, const void *data, int longlen); - -extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen); -extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen); -extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); - -#define __raw_writeb(v,a) (__chk_io_ptr(a), *(volatile unsigned char __force *)(a) = (v)) -#define __raw_writew(v,a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v)) -#define __raw_writel(v,a) (__chk_io_ptr(a), *(volatile unsigned int __force *)(a) = (v)) - -#define __raw_readb(a) (__chk_io_ptr(a), *(volatile unsigned char __force *)(a)) -#define __raw_readw(a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a)) -#define __raw_readl(a) (__chk_io_ptr(a), *(volatile unsigned int __force *)(a)) - -/* - * Architecture ioremap implementation. - */ -#define MT_DEVICE 0 -#define MT_DEVICE_NONSHARED 1 -#define MT_DEVICE_CACHED 2 -#define MT_DEVICE_IXP2000 3 -/* - * types 4 onwards can be found in asm/mach/map.h and are undefined - * for ioremap - */ - -/* - * __arm_ioremap takes CPU physical address. - * __arm_ioremap_pfn takes a Page Frame Number and an offset into that page - */ -extern void __iomem * __arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int); -extern void __iomem * __arm_ioremap(unsigned long, size_t, unsigned int); -extern void __iounmap(volatile void __iomem *addr); - -/* - * Bad read/write accesses... - */ -extern void __readwrite_bug(const char *fn); - -/* - * Now, pick up the machine-defined IO definitions - */ -#include - -/* - * IO port access primitives - * ------------------------- - * - * The ARM doesn't have special IO access instructions; all IO is memory - * mapped. Note that these are defined to perform little endian accesses - * only. Their primary purpose is to access PCI and ISA peripherals. - * - * Note that for a big endian machine, this implies that the following - * big endian mode connectivity is in place, as described by numerous - * ARM documents: - * - * PCI: D0-D7 D8-D15 D16-D23 D24-D31 - * ARM: D24-D31 D16-D23 D8-D15 D0-D7 - * - * The machine specific io.h include defines __io to translate an "IO" - * address to a memory address. - * - * Note that we prevent GCC re-ordering or caching values in expressions - * by introducing sequence points into the in*() definitions. Note that - * __raw_* do not guarantee this behaviour. - * - * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space. - */ -#ifdef __io -#define outb(v,p) __raw_writeb(v,__io(p)) -#define outw(v,p) __raw_writew((__force __u16) \ - cpu_to_le16(v),__io(p)) -#define outl(v,p) __raw_writel((__force __u32) \ - cpu_to_le32(v),__io(p)) - -#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __v; }) -#define inw(p) ({ __u16 __v = le16_to_cpu((__force __le16) \ - __raw_readw(__io(p))); __v; }) -#define inl(p) ({ __u32 __v = le32_to_cpu((__force __le32) \ - __raw_readl(__io(p))); __v; }) - -#define outsb(p,d,l) __raw_writesb(__io(p),d,l) -#define outsw(p,d,l) __raw_writesw(__io(p),d,l) -#define outsl(p,d,l) __raw_writesl(__io(p),d,l) - -#define insb(p,d,l) __raw_readsb(__io(p),d,l) -#define insw(p,d,l) __raw_readsw(__io(p),d,l) -#define insl(p,d,l) __raw_readsl(__io(p),d,l) -#endif - -#define outb_p(val,port) outb((val),(port)) -#define outw_p(val,port) outw((val),(port)) -#define outl_p(val,port) outl((val),(port)) -#define inb_p(port) inb((port)) -#define inw_p(port) inw((port)) -#define inl_p(port) inl((port)) - -#define outsb_p(port,from,len) outsb(port,from,len) -#define outsw_p(port,from,len) outsw(port,from,len) -#define outsl_p(port,from,len) outsl(port,from,len) -#define insb_p(port,to,len) insb(port,to,len) -#define insw_p(port,to,len) insw(port,to,len) -#define insl_p(port,to,len) insl(port,to,len) - -/* - * String version of IO memory access ops: - */ -extern void _memcpy_fromio(void *, const volatile void __iomem *, size_t); -extern void _memcpy_toio(volatile void __iomem *, const void *, size_t); -extern void _memset_io(volatile void __iomem *, int, size_t); - -#define mmiowb() - -/* - * Memory access primitives - * ------------------------ - * - * These perform PCI memory accesses via an ioremap region. They don't - * take an address as such, but a cookie. - * - * Again, this are defined to perform little endian accesses. See the - * IO port primitives for more information. - */ -#ifdef __mem_pci -#define readb(c) ({ __u8 __v = __raw_readb(__mem_pci(c)); __v; }) -#define readw(c) ({ __u16 __v = le16_to_cpu((__force __le16) \ - __raw_readw(__mem_pci(c))); __v; }) -#define readl(c) ({ __u32 __v = le32_to_cpu((__force __le32) \ - __raw_readl(__mem_pci(c))); __v; }) -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) - -#define readsb(p,d,l) __raw_readsb(__mem_pci(p),d,l) -#define readsw(p,d,l) __raw_readsw(__mem_pci(p),d,l) -#define readsl(p,d,l) __raw_readsl(__mem_pci(p),d,l) - -#define writeb(v,c) __raw_writeb(v,__mem_pci(c)) -#define writew(v,c) __raw_writew((__force __u16) \ - cpu_to_le16(v),__mem_pci(c)) -#define writel(v,c) __raw_writel((__force __u32) \ - cpu_to_le32(v),__mem_pci(c)) - -#define writesb(p,d,l) __raw_writesb(__mem_pci(p),d,l) -#define writesw(p,d,l) __raw_writesw(__mem_pci(p),d,l) -#define writesl(p,d,l) __raw_writesl(__mem_pci(p),d,l) - -#define memset_io(c,v,l) _memset_io(__mem_pci(c),(v),(l)) -#define memcpy_fromio(a,c,l) _memcpy_fromio((a),__mem_pci(c),(l)) -#define memcpy_toio(c,a,l) _memcpy_toio(__mem_pci(c),(a),(l)) - -#elif !defined(readb) - -#define readb(c) (__readwrite_bug("readb"),0) -#define readw(c) (__readwrite_bug("readw"),0) -#define readl(c) (__readwrite_bug("readl"),0) -#define writeb(v,c) __readwrite_bug("writeb") -#define writew(v,c) __readwrite_bug("writew") -#define writel(v,c) __readwrite_bug("writel") - -#define check_signature(io,sig,len) (0) - -#endif /* __mem_pci */ - -/* - * ioremap and friends. - * - * ioremap takes a PCI memory address, as specified in - * Documentation/IO-mapping.txt. - * - */ -#ifndef __arch_ioremap -#define ioremap(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE) -#define ioremap_nocache(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE) -#define ioremap_cached(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_CACHED) -#define iounmap(cookie) __iounmap(cookie) -#else -#define ioremap(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) -#define ioremap_nocache(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) -#define ioremap_cached(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_CACHED) -#define iounmap(cookie) __arch_iounmap(cookie) -#endif - -/* - * io{read,write}{8,16,32} macros - */ -#ifndef ioread8 -#define ioread8(p) ({ unsigned int __v = __raw_readb(p); __v; }) -#define ioread16(p) ({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __v; }) -#define ioread32(p) ({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __v; }) - -#define iowrite8(v,p) __raw_writeb(v, p) -#define iowrite16(v,p) __raw_writew((__force __u16)cpu_to_le16(v), p) -#define iowrite32(v,p) __raw_writel((__force __u32)cpu_to_le32(v), p) - -#define ioread8_rep(p,d,c) __raw_readsb(p,d,c) -#define ioread16_rep(p,d,c) __raw_readsw(p,d,c) -#define ioread32_rep(p,d,c) __raw_readsl(p,d,c) - -#define iowrite8_rep(p,s,c) __raw_writesb(p,s,c) -#define iowrite16_rep(p,s,c) __raw_writesw(p,s,c) -#define iowrite32_rep(p,s,c) __raw_writesl(p,s,c) - -extern void __iomem *ioport_map(unsigned long port, unsigned int nr); -extern void ioport_unmap(void __iomem *addr); -#endif - -struct pci_dev; - -extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen); -extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); - -/* - * can the hardware map this into one segment or not, given no other - * constraints. - */ -#define BIOVEC_MERGEABLE(vec1, vec2) \ - ((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2))) - -#ifdef CONFIG_MMU -#define ARCH_HAS_VALID_PHYS_ADDR_RANGE -extern int valid_phys_addr_range(unsigned long addr, size_t size); -extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); -#endif - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -/* - * Register ISA memory and port locations for glibc iopl/inb/outb - * emulation. - */ -extern void register_isa_ports(unsigned int mmio, unsigned int io, - unsigned int io_shift); - -#endif /* __KERNEL__ */ -#endif /* __ASM_ARM_IO_H */ diff --git a/include/asm-arm/ioctl.h b/include/asm-arm/ioctl.h deleted file mode 100644 index b279fe06dfe5..000000000000 --- a/include/asm-arm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-arm/ioctls.h b/include/asm-arm/ioctls.h deleted file mode 100644 index a91d8a1523cf..000000000000 --- a/include/asm-arm/ioctls.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef __ASM_ARM_IOCTLS_H -#define __ASM_ARM_IOCTLS_H - -#include - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T',0x2A, struct termios2) -#define TCSETS2 _IOW('T',0x2B, struct termios2) -#define TCSETSW2 _IOW('T',0x2C, struct termios2) -#define TCSETSF2 _IOW('T',0x2D, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define FIOQSIZE 0x545E - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif diff --git a/include/asm-arm/ipcbuf.h b/include/asm-arm/ipcbuf.h deleted file mode 100644 index 97683975f7df..000000000000 --- a/include/asm-arm/ipcbuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __ASMARM_IPCBUF_H -#define __ASMARM_IPCBUF_H - -/* - * The ipc64_perm structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __ASMARM_IPCBUF_H */ diff --git a/include/asm-arm/irq.h b/include/asm-arm/irq.h deleted file mode 100644 index 9cb01907e43b..000000000000 --- a/include/asm-arm/irq.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __ASM_ARM_IRQ_H -#define __ASM_ARM_IRQ_H - -#include - -#ifndef irq_canonicalize -#define irq_canonicalize(i) (i) -#endif - -#ifndef NR_IRQS -#define NR_IRQS 128 -#endif - -/* - * Use this value to indicate lack of interrupt - * capability - */ -#ifndef NO_IRQ -#define NO_IRQ ((unsigned int)(-1)) -#endif - -#ifndef __ASSEMBLY__ -struct irqaction; -extern void migrate_irqs(void); -#endif - -#endif - diff --git a/include/asm-arm/irq_regs.h b/include/asm-arm/irq_regs.h deleted file mode 100644 index 3dd9c0b70270..000000000000 --- a/include/asm-arm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-arm/irqflags.h b/include/asm-arm/irqflags.h deleted file mode 100644 index 6d09974e6646..000000000000 --- a/include/asm-arm/irqflags.h +++ /dev/null @@ -1,132 +0,0 @@ -#ifndef __ASM_ARM_IRQFLAGS_H -#define __ASM_ARM_IRQFLAGS_H - -#ifdef __KERNEL__ - -#include - -/* - * CPU interrupt mask handling. - */ -#if __LINUX_ARM_ARCH__ >= 6 - -#define raw_local_irq_save(x) \ - ({ \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_save\n" \ - "cpsid i" \ - : "=r" (x) : : "memory", "cc"); \ - }) - -#define raw_local_irq_enable() __asm__("cpsie i @ __sti" : : : "memory", "cc") -#define raw_local_irq_disable() __asm__("cpsid i @ __cli" : : : "memory", "cc") -#define local_fiq_enable() __asm__("cpsie f @ __stf" : : : "memory", "cc") -#define local_fiq_disable() __asm__("cpsid f @ __clf" : : : "memory", "cc") - -#else - -/* - * Save the current interrupt enable state & disable IRQs - */ -#define raw_local_irq_save(x) \ - ({ \ - unsigned long temp; \ - (void) (&temp == &x); \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_save\n" \ -" orr %1, %0, #128\n" \ -" msr cpsr_c, %1" \ - : "=r" (x), "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - -/* - * Enable IRQs - */ -#define raw_local_irq_enable() \ - ({ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_enable\n" \ -" bic %0, %0, #128\n" \ -" msr cpsr_c, %0" \ - : "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - -/* - * Disable IRQs - */ -#define raw_local_irq_disable() \ - ({ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_irq_disable\n" \ -" orr %0, %0, #128\n" \ -" msr cpsr_c, %0" \ - : "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - -/* - * Enable FIQs - */ -#define local_fiq_enable() \ - ({ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ stf\n" \ -" bic %0, %0, #64\n" \ -" msr cpsr_c, %0" \ - : "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - -/* - * Disable FIQs - */ -#define local_fiq_disable() \ - ({ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ clf\n" \ -" orr %0, %0, #64\n" \ -" msr cpsr_c, %0" \ - : "=r" (temp) \ - : \ - : "memory", "cc"); \ - }) - -#endif - -/* - * Save the current interrupt enable state. - */ -#define raw_local_save_flags(x) \ - ({ \ - __asm__ __volatile__( \ - "mrs %0, cpsr @ local_save_flags" \ - : "=r" (x) : : "memory", "cc"); \ - }) - -/* - * restore saved IRQ & FIQ state - */ -#define raw_local_irq_restore(x) \ - __asm__ __volatile__( \ - "msr cpsr_c, %0 @ local_irq_restore\n" \ - : \ - : "r" (x) \ - : "memory", "cc") - -#define raw_irqs_disabled_flags(flags) \ -({ \ - (int)((flags) & PSR_I_BIT); \ -}) - -#endif -#endif diff --git a/include/asm-arm/kdebug.h b/include/asm-arm/kdebug.h deleted file mode 100644 index 6ece1b037665..000000000000 --- a/include/asm-arm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-arm/kexec.h b/include/asm-arm/kexec.h deleted file mode 100644 index c8986bb99ed5..000000000000 --- a/include/asm-arm/kexec.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _ARM_KEXEC_H -#define _ARM_KEXEC_H - -#ifdef CONFIG_KEXEC - -/* Maximum physical address we can use pages from */ -#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) -/* Maximum address we can reach in physical address mode */ -#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) -/* Maximum address we can use for the control code buffer */ -#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL) - -#define KEXEC_CONTROL_CODE_SIZE 4096 - -#define KEXEC_ARCH KEXEC_ARCH_ARM - -#define KEXEC_ARM_ATAGS_OFFSET 0x1000 -#define KEXEC_ARM_ZIMAGE_OFFSET 0x8000 - -#ifndef __ASSEMBLY__ - -struct kimage; -/* Provide a dummy definition to avoid build failures. */ -static inline void crash_setup_regs(struct pt_regs *newregs, - struct pt_regs *oldregs) { } - -#endif /* __ASSEMBLY__ */ - -#endif /* CONFIG_KEXEC */ - -#endif /* _ARM_KEXEC_H */ diff --git a/include/asm-arm/kgdb.h b/include/asm-arm/kgdb.h deleted file mode 100644 index 67af4b841984..000000000000 --- a/include/asm-arm/kgdb.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * ARM KGDB support - * - * Author: Deepak Saxena - * - * Copyright (C) 2002 MontaVista Software Inc. - * - */ - -#ifndef __ARM_KGDB_H__ -#define __ARM_KGDB_H__ - -#include - -/* - * GDB assumes that we're a user process being debugged, so - * it will send us an SWI command to write into memory as the - * debug trap. When an SWI occurs, the next instruction addr is - * placed into R14_svc before jumping to the vector trap. - * This doesn't work for kernel debugging as we are already in SVC - * we would loose the kernel's LR, which is a bad thing. This - * is bad thing. - * - * By doing this as an undefined instruction trap, we force a mode - * switch from SVC to UND mode, allowing us to save full kernel state. - * - * We also define a KGDB_COMPILED_BREAK which can be used to compile - * in breakpoints. This is important for things like sysrq-G and for - * the initial breakpoint from trap_init(). - * - * Note to ARM HW designers: Add real trap support like SH && PPC to - * make our lives much much simpler. :) - */ -#define BREAK_INSTR_SIZE 4 -#define GDB_BREAKINST 0xef9f0001 -#define KGDB_BREAKINST 0xe7ffdefe -#define KGDB_COMPILED_BREAK 0xe7ffdeff -#define CACHE_FLUSH_IS_SAFE 1 - -#ifndef __ASSEMBLY__ - -static inline void arch_kgdb_breakpoint(void) -{ - asm(".word 0xe7ffdeff"); -} - -extern void kgdb_handle_bus_error(void); -extern int kgdb_fault_expected; - -#endif /* !__ASSEMBLY__ */ - -/* - * From Kevin Hilman: - * - * gdb is expecting the following registers layout. - * - * r0-r15: 1 long word each - * f0-f7: unused, 3 long words each !! - * fps: unused, 1 long word - * cpsr: 1 long word - * - * Even though f0-f7 and fps are not used, they need to be - * present in the registers sent for correct processing in - * the host-side gdb. - * - * In particular, it is crucial that CPSR is in the right place, - * otherwise gdb will not be able to correctly interpret stepping over - * conditional branches. - */ -#define _GP_REGS 16 -#define _FP_REGS 8 -#define _EXTRA_REGS 2 -#define GDB_MAX_REGS (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS) - -#define KGDB_MAX_NO_CPUS 1 -#define BUFMAX 400 -#define NUMREGBYTES (GDB_MAX_REGS << 2) -#define NUMCRITREGBYTES (32 << 2) - -#define _R0 0 -#define _R1 1 -#define _R2 2 -#define _R3 3 -#define _R4 4 -#define _R5 5 -#define _R6 6 -#define _R7 7 -#define _R8 8 -#define _R9 9 -#define _R10 10 -#define _FP 11 -#define _IP 12 -#define _SPT 13 -#define _LR 14 -#define _PC 15 -#define _CPSR (GDB_MAX_REGS - 1) - -/* - * So that we can denote the end of a frame for tracing, - * in the simple case: - */ -#define CFI_END_FRAME(func) __CFI_END_FRAME(_PC, _SPT, func) - -#endif /* __ASM_KGDB_H__ */ diff --git a/include/asm-arm/kmap_types.h b/include/asm-arm/kmap_types.h deleted file mode 100644 index 45def13ee17a..000000000000 --- a/include/asm-arm/kmap_types.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef __ARM_KMAP_TYPES_H -#define __ARM_KMAP_TYPES_H - -/* - * This is the "bare minimum". AIO seems to require this. - */ -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_TYPE_NR -}; - -#endif diff --git a/include/asm-arm/kprobes.h b/include/asm-arm/kprobes.h deleted file mode 100644 index b1a37876942d..000000000000 --- a/include/asm-arm/kprobes.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * include/asm-arm/kprobes.h - * - * Copyright (C) 2006, 2007 Motorola Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -#ifndef _ARM_KPROBES_H -#define _ARM_KPROBES_H - -#include -#include -#include - -#define __ARCH_WANT_KPROBES_INSN_SLOT -#define MAX_INSN_SIZE 2 -#define MAX_STACK_SIZE 64 /* 32 would probably be OK */ - -/* - * This undefined instruction must be unique and - * reserved solely for kprobes' use. - */ -#define KPROBE_BREAKPOINT_INSTRUCTION 0xe7f001f8 - -#define regs_return_value(regs) ((regs)->ARM_r0) -#define flush_insn_slot(p) do { } while (0) -#define kretprobe_blacklist_size 0 - -typedef u32 kprobe_opcode_t; - -struct kprobe; -typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *); - -/* Architecture specific copy of original instruction. */ -struct arch_specific_insn { - kprobe_opcode_t *insn; - kprobe_insn_handler_t *insn_handler; -}; - -struct prev_kprobe { - struct kprobe *kp; - unsigned int status; -}; - -/* per-cpu kprobe control block */ -struct kprobe_ctlblk { - unsigned int kprobe_status; - struct prev_kprobe prev_kprobe; - struct pt_regs jprobe_saved_regs; - char jprobes_stack[MAX_STACK_SIZE]; -}; - -void arch_remove_kprobe(struct kprobe *); -void kretprobe_trampoline(void); - -int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr); -int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr); -int kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data); - -enum kprobe_insn { - INSN_REJECTED, - INSN_GOOD, - INSN_GOOD_NO_SLOT -}; - -enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t, - struct arch_specific_insn *); -void __init arm_kprobe_decode_init(void); - -#endif /* _ARM_KPROBES_H */ diff --git a/include/asm-arm/leds.h b/include/asm-arm/leds.h deleted file mode 100644 index 12290ea55801..000000000000 --- a/include/asm-arm/leds.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * linux/include/asm-arm/leds.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Event-driven interface for LEDs on machines - * Added led_start and led_stop- Alex Holden, 28th Dec 1998. - */ -#ifndef ASM_ARM_LEDS_H -#define ASM_ARM_LEDS_H - - -typedef enum { - led_idle_start, - led_idle_end, - led_timer, - led_start, - led_stop, - led_claim, /* override idle & timer leds */ - led_release, /* restore idle & timer leds */ - led_start_timer_mode, - led_stop_timer_mode, - led_green_on, - led_green_off, - led_amber_on, - led_amber_off, - led_red_on, - led_red_off, - led_blue_on, - led_blue_off, - /* - * I want this between led_timer and led_start, but - * someone has decided to export this to user space - */ - led_halted -} led_event_t; - -/* Use this routine to handle LEDs */ - -#ifdef CONFIG_LEDS -extern void (*leds_event)(led_event_t); -#else -#define leds_event(e) -#endif - -#endif diff --git a/include/asm-arm/limits.h b/include/asm-arm/limits.h deleted file mode 100644 index 08d8c6600804..000000000000 --- a/include/asm-arm/limits.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_PIPE_H -#define __ASM_PIPE_H - -#ifndef PAGE_SIZE -#include -#endif - -#define PIPE_BUF PAGE_SIZE - -#endif - diff --git a/include/asm-arm/linkage.h b/include/asm-arm/linkage.h deleted file mode 100644 index 5a25632b1bc0..000000000000 --- a/include/asm-arm/linkage.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -#define __ALIGN .align 0 -#define __ALIGN_STR ".align 0" - -#define ENDPROC(name) \ - .type name, %function; \ - END(name) - -#endif diff --git a/include/asm-arm/local.h b/include/asm-arm/local.h deleted file mode 100644 index c11c530f74d0..000000000000 --- a/include/asm-arm/local.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-arm/locks.h b/include/asm-arm/locks.h deleted file mode 100644 index 852220eecdbc..000000000000 --- a/include/asm-arm/locks.h +++ /dev/null @@ -1,274 +0,0 @@ -/* - * linux/include/asm-arm/locks.h - * - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Interrupt safe locking assembler. - */ -#ifndef __ASM_PROC_LOCKS_H -#define __ASM_PROC_LOCKS_H - -#if __LINUX_ARM_ARCH__ >= 6 - -#define __down_op(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op\n" \ -"1: ldrex lr, [%0]\n" \ -" sub lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" movmi ip, %0\n" \ -" blmi " #fail \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __down_op_ret(ptr,fail) \ - ({ \ - unsigned int ret; \ - __asm__ __volatile__( \ - "@ down_op_ret\n" \ -"1: ldrex lr, [%1]\n" \ -" sub lr, lr, %2\n" \ -" strex ip, lr, [%1]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" movmi ip, %1\n" \ -" movpl ip, #0\n" \ -" blmi " #fail "\n" \ -" mov %0, ip" \ - : "=&r" (ret) \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - ret; \ - }) - -#define __up_op(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op\n" \ -"1: ldrex lr, [%0]\n" \ -" add lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" cmp lr, #0\n" \ -" movle ip, %0\n" \ -" blle " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -/* - * The value 0x01000000 supports up to 128 processors and - * lots of processes. BIAS must be chosen such that sub'ing - * BIAS once per CPU will result in the long remaining - * negative. - */ -#define RW_LOCK_BIAS 0x01000000 -#define RW_LOCK_BIAS_STR "0x01000000" - -#define __down_op_write(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op_write\n" \ -"1: ldrex lr, [%0]\n" \ -" sub lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" movne ip, %0\n" \ -" blne " #fail \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __up_op_write(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op_write\n" \ -"1: ldrex lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" movcs ip, %0\n" \ -" blcs " #wake \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - }) - -#define __down_op_read(ptr,fail) \ - __down_op(ptr, fail) - -#define __up_op_read(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op_read\n" \ -"1: ldrex lr, [%0]\n" \ -" add lr, lr, %1\n" \ -" strex ip, lr, [%0]\n" \ -" teq ip, #0\n" \ -" bne 1b\n" \ -" teq lr, #0\n" \ -" moveq ip, %0\n" \ -" bleq " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -#else - -#define __down_op(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" subs lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movmi ip, %0\n" \ -" blmi " #fail \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __down_op_ret(ptr,fail) \ - ({ \ - unsigned int ret; \ - __asm__ __volatile__( \ - "@ down_op_ret\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%1]\n" \ -" subs lr, lr, %2\n" \ -" str lr, [%1]\n" \ -" msr cpsr_c, ip\n" \ -" movmi ip, %1\n" \ -" movpl ip, #0\n" \ -" blmi " #fail "\n" \ -" mov %0, ip" \ - : "=&r" (ret) \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - ret; \ - }) - -#define __up_op(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movle ip, %0\n" \ -" blle " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -/* - * The value 0x01000000 supports up to 128 processors and - * lots of processes. BIAS must be chosen such that sub'ing - * BIAS once per CPU will result in the long remaining - * negative. - */ -#define RW_LOCK_BIAS 0x01000000 -#define RW_LOCK_BIAS_STR "0x01000000" - -#define __down_op_write(ptr,fail) \ - ({ \ - __asm__ __volatile__( \ - "@ down_op_write\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" subs lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movne ip, %0\n" \ -" blne " #fail \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __up_op_write(ptr,wake) \ - ({ \ - __asm__ __volatile__( \ - "@ up_op_write\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" movcs ip, %0\n" \ -" blcs " #wake \ - : \ - : "r" (ptr), "I" (RW_LOCK_BIAS) \ - : "ip", "lr", "cc"); \ - smp_mb(); \ - }) - -#define __down_op_read(ptr,fail) \ - __down_op(ptr, fail) - -#define __up_op_read(ptr,wake) \ - ({ \ - smp_mb(); \ - __asm__ __volatile__( \ - "@ up_op_read\n" \ -" mrs ip, cpsr\n" \ -" orr lr, ip, #128\n" \ -" msr cpsr_c, lr\n" \ -" ldr lr, [%0]\n" \ -" adds lr, lr, %1\n" \ -" str lr, [%0]\n" \ -" msr cpsr_c, ip\n" \ -" moveq ip, %0\n" \ -" bleq " #wake \ - : \ - : "r" (ptr), "I" (1) \ - : "ip", "lr", "cc"); \ - }) - -#endif - -#endif diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h deleted file mode 100644 index bcc8aed7c9a9..000000000000 --- a/include/asm-arm/mach/arch.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * linux/include/asm-arm/mach/arch.h - * - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASSEMBLY__ - -struct tag; -struct meminfo; -struct sys_timer; - -struct machine_desc { - /* - * Note! The first four elements are used - * by assembler code in head.S, head-common.S - */ - unsigned int nr; /* architecture number */ - unsigned int phys_io; /* start of physical io */ - unsigned int io_pg_offst; /* byte offset for io - * page tabe entry */ - - const char *name; /* architecture name */ - unsigned long boot_params; /* tagged list */ - - unsigned int video_start; /* start of video RAM */ - unsigned int video_end; /* end of video RAM */ - - unsigned int reserve_lp0 :1; /* never has lp0 */ - unsigned int reserve_lp1 :1; /* never has lp1 */ - unsigned int reserve_lp2 :1; /* never has lp2 */ - unsigned int soft_reboot :1; /* soft reboot */ - void (*fixup)(struct machine_desc *, - struct tag *, char **, - struct meminfo *); - void (*map_io)(void);/* IO mapping function */ - void (*init_irq)(void); - struct sys_timer *timer; /* system tick timer */ - void (*init_machine)(void); -}; - -/* - * Set of macros to define architecture features. This is built into - * a table by the linker. - */ -#define MACHINE_START(_type,_name) \ -static const struct machine_desc __mach_desc_##_type \ - __used \ - __attribute__((__section__(".arch.info.init"))) = { \ - .nr = MACH_TYPE_##_type, \ - .name = _name, - -#define MACHINE_END \ -}; - -#endif diff --git a/include/asm-arm/mach/dma.h b/include/asm-arm/mach/dma.h deleted file mode 100644 index e7c4a20aad53..000000000000 --- a/include/asm-arm/mach/dma.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/include/asm-arm/mach/dma.h - * - * Copyright (C) 1998-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This header file describes the interface between the generic DMA handler - * (dma.c) and the architecture-specific DMA backends (dma-*.c) - */ - -struct dma_struct; -typedef struct dma_struct dma_t; - -struct dma_ops { - int (*request)(dmach_t, dma_t *); /* optional */ - void (*free)(dmach_t, dma_t *); /* optional */ - void (*enable)(dmach_t, dma_t *); /* mandatory */ - void (*disable)(dmach_t, dma_t *); /* mandatory */ - int (*residue)(dmach_t, dma_t *); /* optional */ - int (*setspeed)(dmach_t, dma_t *, int); /* optional */ - char *type; -}; - -struct dma_struct { - void *addr; /* single DMA address */ - unsigned long count; /* single DMA size */ - struct scatterlist buf; /* single DMA */ - int sgcount; /* number of DMA SG */ - struct scatterlist *sg; /* DMA Scatter-Gather List */ - - unsigned int active:1; /* Transfer active */ - unsigned int invalid:1; /* Address/Count changed */ - - dmamode_t dma_mode; /* DMA mode */ - int speed; /* DMA speed */ - - unsigned int lock; /* Device is allocated */ - const char *device_id; /* Device name */ - - unsigned int dma_base; /* Controller base address */ - int dma_irq; /* Controller IRQ */ - struct scatterlist cur_sg; /* Current controller buffer */ - unsigned int state; - - struct dma_ops *d_ops; -}; - -/* Prototype: void arch_dma_init(dma) - * Purpose : Initialise architecture specific DMA - * Params : dma - pointer to array of DMA structures - */ -extern void arch_dma_init(dma_t *dma); - -extern void isa_init_dma(dma_t *dma); diff --git a/include/asm-arm/mach/flash.h b/include/asm-arm/mach/flash.h deleted file mode 100644 index 05b029ef6371..000000000000 --- a/include/asm-arm/mach/flash.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/mach/flash.h - * - * Copyright (C) 2003 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_MACH_FLASH_H -#define ASMARM_MACH_FLASH_H - -struct mtd_partition; -struct mtd_info; - -/* - * map_name: the map probe function name - * name: flash device name (eg, as used with mtdparts=) - * width: width of mapped device - * init: method called at driver/device initialisation - * exit: method called at driver/device removal - * set_vpp: method called to enable or disable VPP - * mmcontrol: method called to enable or disable Sync. Burst Read in OneNAND - * parts: optional array of mtd_partitions for static partitioning - * nr_parts: number of mtd_partitions for static partitoning - */ -struct flash_platform_data { - const char *map_name; - const char *name; - unsigned int width; - int (*init)(void); - void (*exit)(void); - void (*set_vpp)(int on); - void (*mmcontrol)(struct mtd_info *mtd, int sync_read); - struct mtd_partition *parts; - unsigned int nr_parts; -}; - -#endif diff --git a/include/asm-arm/mach/irda.h b/include/asm-arm/mach/irda.h deleted file mode 100644 index 58984d9c0b0b..000000000000 --- a/include/asm-arm/mach/irda.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/mach/irda.h - * - * Copyright (C) 2004 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_MACH_IRDA_H -#define __ASM_ARM_MACH_IRDA_H - -struct irda_platform_data { - int (*startup)(struct device *); - void (*shutdown)(struct device *); - int (*set_power)(struct device *, unsigned int state); - void (*set_speed)(struct device *, unsigned int speed); -}; - -#endif diff --git a/include/asm-arm/mach/irq.h b/include/asm-arm/mach/irq.h deleted file mode 100644 index eb0bfba6570d..000000000000 --- a/include/asm-arm/mach/irq.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/include/asm-arm/mach/irq.h - * - * Copyright (C) 1995-2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_MACH_IRQ_H -#define __ASM_ARM_MACH_IRQ_H - -#include - -struct seq_file; - -/* - * This is internal. Do not use it. - */ -extern void (*init_arch_irq)(void); -extern void init_FIQ(void); -extern int show_fiq_list(struct seq_file *, void *); - -/* - * Obsolete inline function for calling irq descriptor handlers. - */ -static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc) -{ - desc->handle_irq(irq, desc); -} - -void set_irq_flags(unsigned int irq, unsigned int flags); - -#define IRQF_VALID (1 << 0) -#define IRQF_PROBE (1 << 1) -#define IRQF_NOAUTOEN (1 << 2) - -/* - * This is for easy migration, but should be changed in the source - */ -#define do_bad_IRQ(irq,desc) \ -do { \ - spin_lock(&desc->lock); \ - handle_bad_irq(irq, desc); \ - spin_unlock(&desc->lock); \ -} while(0) - -extern unsigned long irq_err_count; -static inline void ack_bad_irq(int irq) -{ - irq_err_count++; -} - -#endif diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h deleted file mode 100644 index 7ef3c8390180..000000000000 --- a/include/asm-arm/mach/map.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/include/asm-arm/map.h - * - * Copyright (C) 1999-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Page table mapping constructs and function prototypes - */ -#include - -struct map_desc { - unsigned long virtual; - unsigned long pfn; - unsigned long length; - unsigned int type; -}; - -/* types 0-3 are defined in asm/io.h */ -#define MT_CACHECLEAN 4 -#define MT_MINICLEAN 5 -#define MT_LOW_VECTORS 6 -#define MT_HIGH_VECTORS 7 -#define MT_MEMORY 8 -#define MT_ROM 9 - -#define MT_NONSHARED_DEVICE MT_DEVICE_NONSHARED -#define MT_IXP2000_DEVICE MT_DEVICE_IXP2000 - -#ifdef CONFIG_MMU -extern void iotable_init(struct map_desc *, int); -#else -#define iotable_init(map,num) do { } while (0) -#endif diff --git a/include/asm-arm/mach/mmc.h b/include/asm-arm/mach/mmc.h deleted file mode 100644 index eb91145c00c4..000000000000 --- a/include/asm-arm/mach/mmc.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * linux/include/asm-arm/mach/mmc.h - */ -#ifndef ASMARM_MACH_MMC_H -#define ASMARM_MACH_MMC_H - -#include - -struct mmc_platform_data { - unsigned int ocr_mask; /* available voltages */ - u32 (*translate_vdd)(struct device *, unsigned int); - unsigned int (*status)(struct device *); -}; - -#endif diff --git a/include/asm-arm/mach/pci.h b/include/asm-arm/mach/pci.h deleted file mode 100644 index 9d4f6b5ea419..000000000000 --- a/include/asm-arm/mach/pci.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * linux/include/asm-arm/mach/pci.h - * - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -struct pci_sys_data; -struct pci_bus; - -struct hw_pci { - struct list_head buses; - int nr_controllers; - int (*setup)(int nr, struct pci_sys_data *); - struct pci_bus *(*scan)(int nr, struct pci_sys_data *); - void (*preinit)(void); - void (*postinit)(void); - u8 (*swizzle)(struct pci_dev *dev, u8 *pin); - int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin); -}; - -/* - * Per-controller structure - */ -struct pci_sys_data { - struct list_head node; - int busnr; /* primary bus number */ - u64 mem_offset; /* bus->cpu memory mapping offset */ - unsigned long io_offset; /* bus->cpu IO mapping offset */ - struct pci_bus *bus; /* PCI bus */ - struct resource *resource[3]; /* Primary PCI bus resources */ - /* Bridge swizzling */ - u8 (*swizzle)(struct pci_dev *, u8 *); - /* IRQ mapping */ - int (*map_irq)(struct pci_dev *, u8, u8); - struct hw_pci *hw; -}; - -/* - * This is the standard PCI-PCI bridge swizzling algorithm. - */ -u8 pci_std_swizzle(struct pci_dev *dev, u8 *pinp); - -/* - * Call this with your hw_pci struct to initialise the PCI system. - */ -void pci_common_init(struct hw_pci *); - -/* - * PCI controllers - */ -extern int iop3xx_pci_setup(int nr, struct pci_sys_data *); -extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *); -extern void iop3xx_pci_preinit(void); -extern void iop3xx_pci_preinit_cond(void); - -extern int dc21285_setup(int nr, struct pci_sys_data *); -extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *); -extern void dc21285_preinit(void); -extern void dc21285_postinit(void); - -extern int via82c505_setup(int nr, struct pci_sys_data *); -extern struct pci_bus *via82c505_scan_bus(int nr, struct pci_sys_data *); -extern void via82c505_init(void *sysdata); - -extern int pci_v3_setup(int nr, struct pci_sys_data *); -extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *); -extern void pci_v3_preinit(void); -extern void pci_v3_postinit(void); diff --git a/include/asm-arm/mach/serial_at91.h b/include/asm-arm/mach/serial_at91.h deleted file mode 100644 index 55b317a89061..000000000000 --- a/include/asm-arm/mach/serial_at91.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * linux/include/asm-arm/mach/serial_at91.h - * - * Based on serial_sa1100.h by Nicolas Pitre - * - * Copyright (C) 2002 ATMEL Rousset - * - * Low level machine dependent UART functions. - */ - -struct uart_port; - -/* - * This is a temporary structure for registering these - * functions; it is intended to be discarded after boot. - */ -struct atmel_port_fns { - void (*set_mctrl)(struct uart_port *, u_int); - u_int (*get_mctrl)(struct uart_port *); - void (*enable_ms)(struct uart_port *); - void (*pm)(struct uart_port *, u_int, u_int); - int (*set_wake)(struct uart_port *, u_int); - int (*open)(struct uart_port *); - void (*close)(struct uart_port *); -}; - -#if defined(CONFIG_SERIAL_ATMEL) -void atmel_register_uart_fns(struct atmel_port_fns *fns); -#else -#define atmel_register_uart_fns(fns) do { } while (0) -#endif - - diff --git a/include/asm-arm/mach/serial_sa1100.h b/include/asm-arm/mach/serial_sa1100.h deleted file mode 100644 index 20c22bb218d9..000000000000 --- a/include/asm-arm/mach/serial_sa1100.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/include/asm-arm/mach/serial_sa1100.h - * - * Author: Nicolas Pitre - * - * Moved to include/asm-arm/mach and changed lots, Russell King - * - * Low level machine dependent UART functions. - */ - -struct uart_port; -struct uart_info; - -/* - * This is a temporary structure for registering these - * functions; it is intended to be discarded after boot. - */ -struct sa1100_port_fns { - void (*set_mctrl)(struct uart_port *, u_int); - u_int (*get_mctrl)(struct uart_port *); - void (*pm)(struct uart_port *, u_int, u_int); - int (*set_wake)(struct uart_port *, u_int); -}; - -#ifdef CONFIG_SERIAL_SA1100 -void sa1100_register_uart_fns(struct sa1100_port_fns *fns); -void sa1100_register_uart(int idx, int port); -#else -#define sa1100_register_uart_fns(fns) do { } while (0) -#define sa1100_register_uart(idx,port) do { } while (0) -#endif diff --git a/include/asm-arm/mach/sharpsl_param.h b/include/asm-arm/mach/sharpsl_param.h deleted file mode 100644 index 7a24ecf04220..000000000000 --- a/include/asm-arm/mach/sharpsl_param.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Hardware parameter area specific to Sharp SL series devices - * - * Copyright (c) 2005 Richard Purdie - * - * Based on Sharp's 2.4 kernel patches - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -struct sharpsl_param_info { - unsigned int comadj_keyword; - unsigned int comadj; - - unsigned int uuid_keyword; - unsigned char uuid[16]; - - unsigned int touch_keyword; - unsigned int touch_xp; - unsigned int touch_yp; - unsigned int touch_xd; - unsigned int touch_yd; - - unsigned int adadj_keyword; - unsigned int adadj; - - unsigned int phad_keyword; - unsigned int phadadj; -} __attribute__((packed)); - - -extern struct sharpsl_param_info sharpsl_param; -extern void sharpsl_save_param(void); - diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h deleted file mode 100644 index 2fd36ea0130d..000000000000 --- a/include/asm-arm/mach/time.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/include/asm-arm/mach/time.h - * - * Copyright (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_MACH_TIME_H -#define __ASM_ARM_MACH_TIME_H - -#include - -/* - * This is our kernel timer structure. - * - * - init - * Initialise the kernels jiffy timer source, claim interrupt - * using setup_irq. This is called early on during initialisation - * while interrupts are still disabled on the local CPU. - * - suspend - * Suspend the kernel jiffy timer source, if necessary. This - * is called with interrupts disabled, after all normal devices - * have been suspended. If no action is required, set this to - * NULL. - * - resume - * Resume the kernel jiffy timer source, if necessary. This - * is called with interrupts disabled before any normal devices - * are resumed. If no action is required, set this to NULL. - * - offset - * Return the timer offset in microseconds since the last timer - * interrupt. Note: this must take account of any unprocessed - * timer interrupt which may be pending. - */ -struct sys_timer { - struct sys_device dev; - void (*init)(void); - void (*suspend)(void); - void (*resume)(void); -#ifndef CONFIG_GENERIC_TIME - unsigned long (*offset)(void); -#endif -}; - -extern struct sys_timer *system_timer; -extern void timer_tick(void); - -/* - * Kernel time keeping support. - */ -struct timespec; -extern int (*set_rtc)(void); -extern void save_time_delta(struct timespec *delta, struct timespec *rtc); -extern void restore_time_delta(struct timespec *delta, struct timespec *rtc); - -#endif diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h deleted file mode 100644 index 9e5ed7c0f27f..000000000000 --- a/include/asm-arm/mach/udc_pxa2xx.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/include/asm-arm/mach/udc_pxa2xx.h - * - * This supports machine-specific differences in how the PXA2xx - * USB Device Controller (UDC) is wired. - * - * It is set in linux/arch/arm/mach-pxa/.c or in - * linux/arch/mach-ixp4xx/.c and used in - * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c - */ - -struct pxa2xx_udc_mach_info { - int (*udc_is_connected)(void); /* do we see host? */ - void (*udc_command)(int cmd); -#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */ -#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */ - - /* Boards following the design guidelines in the developer's manual, - * with on-chip GPIOs not Lubbock's weird hardware, can have a sane - * VBUS IRQ and omit the methods above. Store the GPIO number - * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits. - * Note that sometimes the signals go through inverters... - */ - bool gpio_vbus_inverted; - u16 gpio_vbus; /* high == vbus present */ - bool gpio_pullup_inverted; - u16 gpio_pullup; /* high == pullup activated */ -}; - diff --git a/include/asm-arm/mc146818rtc.h b/include/asm-arm/mc146818rtc.h deleted file mode 100644 index 7b81e0c42543..000000000000 --- a/include/asm-arm/mc146818rtc.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Machine dependent access functions for RTC registers. - */ -#ifndef _ASM_MC146818RTC_H -#define _ASM_MC146818RTC_H - -#include -#include - -#ifndef RTC_PORT -#define RTC_PORT(x) (0x70 + (x)) -#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ -#endif - -/* - * The yet supported machines all access the RTC index register via - * an ISA port access but the way to access the date register differs ... - */ -#define CMOS_READ(addr) ({ \ -outb_p((addr),RTC_PORT(0)); \ -inb_p(RTC_PORT(1)); \ -}) -#define CMOS_WRITE(val, addr) ({ \ -outb_p((addr),RTC_PORT(0)); \ -outb_p((val),RTC_PORT(1)); \ -}) - -#endif /* _ASM_MC146818RTC_H */ diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h deleted file mode 100644 index 9ba4d7136e6b..000000000000 --- a/include/asm-arm/memory.h +++ /dev/null @@ -1,334 +0,0 @@ -/* - * linux/include/asm-arm/memory.h - * - * Copyright (C) 2000-2002 Russell King - * modification for nommu, Hyok S. Choi, 2004 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note: this file should not be included by non-asm/.h files - */ -#ifndef __ASM_ARM_MEMORY_H -#define __ASM_ARM_MEMORY_H - -/* - * Allow for constants defined here to be used from assembly code - * by prepending the UL suffix only with actual C code compilation. - */ -#ifndef __ASSEMBLY__ -#define UL(x) (x##UL) -#else -#define UL(x) (x) -#endif - -#include -#include -#include - -#ifdef CONFIG_MMU - -#ifndef TASK_SIZE -/* - * TASK_SIZE - the maximum size of a user space task. - * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area - */ -#define TASK_SIZE UL(0xbf000000) -#define TASK_UNMAPPED_BASE UL(0x40000000) -#endif - -/* - * The maximum size of a 26-bit user space task. - */ -#define TASK_SIZE_26 UL(0x04000000) - -/* - * Page offset: 3GB - */ -#ifndef PAGE_OFFSET -#define PAGE_OFFSET UL(0xc0000000) -#endif - -/* - * The module space lives between the addresses given by TASK_SIZE - * and PAGE_OFFSET - it must be within 32MB of the kernel text. - */ -#define MODULE_END (PAGE_OFFSET) -#define MODULE_START (MODULE_END - 16*1048576) - -#if TASK_SIZE > MODULE_START -#error Top of user space clashes with start of module space -#endif - -/* - * The XIP kernel gets mapped at the bottom of the module vm area. - * Since we use sections to map it, this macro replaces the physical address - * with its virtual address while keeping offset from the base section. - */ -#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff)) - -/* - * Allow 16MB-aligned ioremap pages - */ -#define IOREMAP_MAX_ORDER 24 - -#else /* CONFIG_MMU */ - -/* - * The limitation of user task size can grow up to the end of free ram region. - * It is difficult to define and perhaps will never meet the original meaning - * of this define that was meant to. - * Fortunately, there is no reference for this in noMMU mode, for now. - */ -#ifndef TASK_SIZE -#define TASK_SIZE (CONFIG_DRAM_SIZE) -#endif - -#ifndef TASK_UNMAPPED_BASE -#define TASK_UNMAPPED_BASE UL(0x00000000) -#endif - -#ifndef PHYS_OFFSET -#define PHYS_OFFSET (CONFIG_DRAM_BASE) -#endif - -#ifndef END_MEM -#define END_MEM (CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE) -#endif - -#ifndef PAGE_OFFSET -#define PAGE_OFFSET (PHYS_OFFSET) -#endif - -/* - * The module can be at any place in ram in nommu mode. - */ -#define MODULE_END (END_MEM) -#define MODULE_START (PHYS_OFFSET) - -#endif /* !CONFIG_MMU */ - -/* - * Size of DMA-consistent memory region. Must be multiple of 2M, - * between 2MB and 14MB inclusive. - */ -#ifndef CONSISTENT_DMA_SIZE -#define CONSISTENT_DMA_SIZE SZ_2M -#endif - -/* - * Physical vs virtual RAM address space conversion. These are - * private definitions which should NOT be used outside memory.h - * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. - */ -#ifndef __virt_to_phys -#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET) -#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) -#endif - -/* - * Convert a physical address to a Page Frame Number and back - */ -#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT) -#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT) - -#ifndef __ASSEMBLY__ - -/* - * The DMA mask corresponding to the maximum bus address allocatable - * using GFP_DMA. The default here places no restriction on DMA - * allocations. This must be the smallest DMA mask in the system, - * so a successful GFP_DMA allocation will always satisfy this. - */ -#ifndef ISA_DMA_THRESHOLD -#define ISA_DMA_THRESHOLD (0xffffffffULL) -#endif - -#ifndef arch_adjust_zones -#define arch_adjust_zones(node,size,holes) do { } while (0) -#endif - -/* - * PFNs are used to describe any physical page; this means - * PFN 0 == physical address 0. - * - * This is the PFN of the first RAM page in the kernel - * direct-mapped view. We assume this is the first page - * of RAM in the mem_map as well. - */ -#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT) - -/* - * These are *only* valid on the kernel direct mapped RAM memory. - * Note: Drivers should NOT use these. They are the wrong - * translation for translating DMA addresses. Use the driver - * DMA support - see dma-mapping.h. - */ -static inline unsigned long virt_to_phys(void *x) -{ - return __virt_to_phys((unsigned long)(x)); -} - -static inline void *phys_to_virt(unsigned long x) -{ - return (void *)(__phys_to_virt((unsigned long)(x))); -} - -/* - * Drivers should NOT use these either. - */ -#define __pa(x) __virt_to_phys((unsigned long)(x)) -#define __va(x) ((void *)__phys_to_virt((unsigned long)(x))) -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) - -/* - * Virtual <-> DMA view memory address translations - * Again, these are *only* valid on the kernel direct mapped RAM - * memory. Use of these is *deprecated* (and that doesn't mean - * use the __ prefixed forms instead.) See dma-mapping.h. - */ -static inline __deprecated unsigned long virt_to_bus(void *x) -{ - return __virt_to_bus((unsigned long)x); -} - -static inline __deprecated void *bus_to_virt(unsigned long x) -{ - return (void *)__bus_to_virt(x); -} - -/* - * Conversion between a struct page and a physical address. - * - * Note: when converting an unknown physical address to a - * struct page, the resulting pointer must be validated - * using VALID_PAGE(). It must return an invalid struct page - * for any physical address not corresponding to a system - * RAM address. - * - * page_to_pfn(page) convert a struct page * to a PFN number - * pfn_to_page(pfn) convert a _valid_ PFN number to struct page * - * pfn_valid(pfn) indicates whether a PFN number is valid - * - * virt_to_page(k) convert a _valid_ virtual address to struct page * - * virt_addr_valid(k) indicates whether a virtual address is valid - */ -#ifndef CONFIG_DISCONTIGMEM - -#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET - -#ifndef CONFIG_SPARSEMEM -#define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr)) -#endif - -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) - -#define PHYS_TO_NID(addr) (0) - -#else /* CONFIG_DISCONTIGMEM */ - -/* - * This is more complex. We have a set of mem_map arrays spread - * around in memory. - */ -#include - -#define arch_pfn_to_nid(pfn) PFN_TO_NID(pfn) -#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT) - -#define pfn_valid(pfn) \ - ({ \ - unsigned int nid = PFN_TO_NID(pfn); \ - int valid = nid < MAX_NUMNODES; \ - if (valid) { \ - pg_data_t *node = NODE_DATA(nid); \ - valid = (pfn - node->node_start_pfn) < \ - node->node_spanned_pages; \ - } \ - valid; \ - }) - -#define virt_to_page(kaddr) \ - (ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr)) - -#define virt_addr_valid(kaddr) (KVADDR_TO_NID(kaddr) < MAX_NUMNODES) - -/* - * Common discontigmem stuff. - * PHYS_TO_NID is used by the ARM kernel/setup.c - */ -#define PHYS_TO_NID(addr) PFN_TO_NID((addr) >> PAGE_SHIFT) - -/* - * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory - * and returns the mem_map of that node. - */ -#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr)) - -/* - * Given a page frame number, find the owning node of the memory - * and returns the mem_map of that node. - */ -#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn)) - -#ifdef NODE_MEM_SIZE_BITS -#define NODE_MEM_SIZE_MASK ((1 << NODE_MEM_SIZE_BITS) - 1) - -/* - * Given a kernel address, find the home node of the underlying memory. - */ -#define KVADDR_TO_NID(addr) \ - (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS) - -/* - * Given a page frame number, convert it to a node id. - */ -#define PFN_TO_NID(pfn) \ - (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT)) - -/* - * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory - * and returns the index corresponding to the appropriate page in the - * node's mem_map. - */ -#define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT) - -#endif /* NODE_MEM_SIZE_BITS */ - -#endif /* !CONFIG_DISCONTIGMEM */ - -/* - * For BIO. "will die". Kill me when bio_to_phys() and bvec_to_phys() die. - */ -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) - -/* - * Optional device DMA address remapping. Do _not_ use directly! - * We should really eliminate virt_to_bus() here - it's deprecated. - */ -#ifndef __arch_page_to_dma -#define page_to_dma(dev, page) ((dma_addr_t)__virt_to_bus((unsigned long)page_address(page))) -#define dma_to_virt(dev, addr) ((void *)__bus_to_virt(addr)) -#define virt_to_dma(dev, addr) ((dma_addr_t)__virt_to_bus((unsigned long)(addr))) -#else -#define page_to_dma(dev, page) (__arch_page_to_dma(dev, page)) -#define dma_to_virt(dev, addr) (__arch_dma_to_virt(dev, addr)) -#define virt_to_dma(dev, addr) (__arch_virt_to_dma(dev, addr)) -#endif - -/* - * Optional coherency support. Currently used only by selected - * Intel XSC3-based systems. - */ -#ifndef arch_is_coherent -#define arch_is_coherent() 0 -#endif - -#endif - -#include - -#endif diff --git a/include/asm-arm/mman.h b/include/asm-arm/mman.h deleted file mode 100644 index 54570d2e95b7..000000000000 --- a/include/asm-arm/mman.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ARM_MMAN_H__ -#define __ARM_MMAN_H__ - -#include - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* __ARM_MMAN_H__ */ diff --git a/include/asm-arm/mmu.h b/include/asm-arm/mmu.h deleted file mode 100644 index 53099d4ee421..000000000000 --- a/include/asm-arm/mmu.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef __ARM_MMU_H -#define __ARM_MMU_H - -#ifdef CONFIG_MMU - -typedef struct { -#ifdef CONFIG_CPU_HAS_ASID - unsigned int id; -#endif - unsigned int kvm_seq; -} mm_context_t; - -#ifdef CONFIG_CPU_HAS_ASID -#define ASID(mm) ((mm)->context.id & 255) -#else -#define ASID(mm) (0) -#endif - -#else - -/* - * From nommu.h: - * Copyright (C) 2002, David McCullough - * modified for 2.6 by Hyok S. Choi - */ -typedef struct { - struct vm_list_struct *vmlist; - unsigned long end_brk; -} mm_context_t; - -#endif - -#endif diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h deleted file mode 100644 index 91b9dfdfed52..000000000000 --- a/include/asm-arm/mmu_context.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * linux/include/asm-arm/mmu_context.h - * - * Copyright (C) 1996 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 27-06-1996 RMK Created - */ -#ifndef __ASM_ARM_MMU_CONTEXT_H -#define __ASM_ARM_MMU_CONTEXT_H - -#include -#include -#include -#include - -void __check_kvm_seq(struct mm_struct *mm); - -#ifdef CONFIG_CPU_HAS_ASID - -/* - * On ARMv6, we have the following structure in the Context ID: - * - * 31 7 0 - * +-------------------------+-----------+ - * | process ID | ASID | - * +-------------------------+-----------+ - * | context ID | - * +-------------------------------------+ - * - * The ASID is used to tag entries in the CPU caches and TLBs. - * The context ID is used by debuggers and trace logic, and - * should be unique within all running processes. - */ -#define ASID_BITS 8 -#define ASID_MASK ((~0) << ASID_BITS) -#define ASID_FIRST_VERSION (1 << ASID_BITS) - -extern unsigned int cpu_last_asid; - -void __init_new_context(struct task_struct *tsk, struct mm_struct *mm); -void __new_context(struct mm_struct *mm); - -static inline void check_context(struct mm_struct *mm) -{ - if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) - __new_context(mm); - - if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq)) - __check_kvm_seq(mm); -} - -#define init_new_context(tsk,mm) (__init_new_context(tsk,mm),0) - -#else - -static inline void check_context(struct mm_struct *mm) -{ - if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq)) - __check_kvm_seq(mm); -} - -#define init_new_context(tsk,mm) 0 - -#endif - -#define destroy_context(mm) do { } while(0) - -/* - * This is called when "tsk" is about to enter lazy TLB mode. - * - * mm: describes the currently active mm context - * tsk: task which is entering lazy tlb - * cpu: cpu number which is entering lazy tlb - * - * tsk->mm will be NULL - */ -static inline void -enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -/* - * This is the actual mm switch as far as the scheduler - * is concerned. No registers are touched. We avoid - * calling the CPU specific function when the mm hasn't - * actually changed. - */ -static inline void -switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ -#ifdef CONFIG_MMU - unsigned int cpu = smp_processor_id(); - -#ifdef CONFIG_SMP - /* check for possible thread migration */ - if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask)) - __flush_icache_all(); -#endif - if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) { - check_context(next); - cpu_switch_mm(next->pgd, next); - if (cache_is_vivt()) - cpu_clear(cpu, prev->cpu_vm_mask); - } -#endif -} - -#define deactivate_mm(tsk,mm) do { } while (0) -#define activate_mm(prev,next) switch_mm(prev, next, NULL) - -#endif diff --git a/include/asm-arm/mmzone.h b/include/asm-arm/mmzone.h deleted file mode 100644 index b87de151f0a4..000000000000 --- a/include/asm-arm/mmzone.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * linux/include/asm-arm/mmzone.h - * - * 1999-12-29 Nicolas Pitre Created - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_MMZONE_H -#define __ASM_MMZONE_H - -/* - * Currently defined in arch/arm/mm/discontig.c - */ -extern pg_data_t discontig_node_data[]; - -/* - * Return a pointer to the node data for node n. - */ -#define NODE_DATA(nid) (&discontig_node_data[nid]) - -/* - * NODE_MEM_MAP gives the kaddr for the mem_map of the node. - */ -#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map) - -#include - -#endif diff --git a/include/asm-arm/module.h b/include/asm-arm/module.h deleted file mode 100644 index 24b168dc31a3..000000000000 --- a/include/asm-arm/module.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _ASM_ARM_MODULE_H -#define _ASM_ARM_MODULE_H - -struct mod_arch_specific -{ - int foo; -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - -/* - * Include the ARM architecture version. - */ -#define MODULE_ARCH_VERMAGIC "ARMv" __stringify(__LINUX_ARM_ARCH__) " " - -#endif /* _ASM_ARM_MODULE_H */ diff --git a/include/asm-arm/msgbuf.h b/include/asm-arm/msgbuf.h deleted file mode 100644 index 33b35b946eaa..000000000000 --- a/include/asm-arm/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _ASMARM_MSGBUF_H -#define _ASMARM_MSGBUF_H - -/* - * The msqid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASMARM_MSGBUF_H */ diff --git a/include/asm-arm/mtd-xip.h b/include/asm-arm/mtd-xip.h deleted file mode 100644 index 9eb127cc7db2..000000000000 --- a/include/asm-arm/mtd-xip.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * MTD primitives for XIP support. Architecture specific functions - * - * Do not include this file directly. It's included from linux/mtd/xip.h - * - * Author: Nicolas Pitre - * Created: Nov 2, 2004 - * Copyright: (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ - */ - -#ifndef __ARM_MTD_XIP_H__ -#define __ARM_MTD_XIP_H__ - -#include -#include - -/* fill instruction prefetch */ -#define xip_iprefetch() do { asm volatile (".rep 8; nop; .endr"); } while (0) - -#endif /* __ARM_MTD_XIP_H__ */ diff --git a/include/asm-arm/mutex.h b/include/asm-arm/mutex.h deleted file mode 100644 index 020bd98710a1..000000000000 --- a/include/asm-arm/mutex.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * include/asm-arm/mutex.h - * - * ARM optimized mutex locking primitives - * - * Please look into asm-generic/mutex-xchg.h for a formal definition. - */ -#ifndef _ASM_MUTEX_H -#define _ASM_MUTEX_H - -#if __LINUX_ARM_ARCH__ < 6 -/* On pre-ARMv6 hardware the swp based implementation is the most efficient. */ -# include -#else - -/* - * Attempting to lock a mutex on ARMv6+ can be done with a bastardized - * atomic decrement (it is not a reliable atomic decrement but it satisfies - * the defined semantics for our purpose, while being smaller and faster - * than a real atomic decrement or atomic swap. The idea is to attempt - * decrementing the lock value only once. If once decremented it isn't zero, - * or if its store-back fails due to a dispute on the exclusive store, we - * simply bail out immediately through the slow path where the lock will be - * reattempted until it succeeds. - */ -static inline void -__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res; - - __asm__ ( - - "ldrex %0, [%2] \n\t" - "sub %0, %0, #1 \n\t" - "strex %1, %0, [%2] " - - : "=&r" (__res), "=&r" (__ex_flag) - : "r" (&(count)->counter) - : "cc","memory" ); - - __res |= __ex_flag; - if (unlikely(__res != 0)) - fail_fn(count); -} - -static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res; - - __asm__ ( - - "ldrex %0, [%2] \n\t" - "sub %0, %0, #1 \n\t" - "strex %1, %0, [%2] " - - : "=&r" (__res), "=&r" (__ex_flag) - : "r" (&(count)->counter) - : "cc","memory" ); - - __res |= __ex_flag; - if (unlikely(__res != 0)) - __res = fail_fn(count); - return __res; -} - -/* - * Same trick is used for the unlock fast path. However the original value, - * rather than the result, is used to test for success in order to have - * better generated assembly. - */ -static inline void -__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res, __orig; - - __asm__ ( - - "ldrex %0, [%3] \n\t" - "add %1, %0, #1 \n\t" - "strex %2, %1, [%3] " - - : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) - : "r" (&(count)->counter) - : "cc","memory" ); - - __orig |= __ex_flag; - if (unlikely(__orig != 0)) - fail_fn(count); -} - -/* - * If the unlock was done on a contended lock, or if the unlock simply fails - * then the mutex remains locked. - */ -#define __mutex_slowpath_needs_to_unlock() 1 - -/* - * For __mutex_fastpath_trylock we use another construct which could be - * described as a "single value cmpxchg". - * - * This provides the needed trylock semantics like cmpxchg would, but it is - * lighter and less generic than a true cmpxchg implementation. - */ -static inline int -__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) -{ - int __ex_flag, __res, __orig; - - __asm__ ( - - "1: ldrex %0, [%3] \n\t" - "subs %1, %0, #1 \n\t" - "strexeq %2, %1, [%3] \n\t" - "movlt %0, #0 \n\t" - "cmpeq %2, #0 \n\t" - "bgt 1b " - - : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) - : "r" (&count->counter) - : "cc", "memory" ); - - return __orig; -} - -#endif -#endif diff --git a/include/asm-arm/nwflash.h b/include/asm-arm/nwflash.h deleted file mode 100644 index 04e5a557a884..000000000000 --- a/include/asm-arm/nwflash.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _FLASH_H -#define _FLASH_H - -#define FLASH_MINOR 160 /* MAJOR is 10 - miscdevice */ -#define CMD_WRITE_DISABLE 0 -#define CMD_WRITE_ENABLE 0x28 -#define CMD_WRITE_BASE64K_ENABLE 0x47 - -#endif /* _FLASH_H */ diff --git a/include/asm-arm/page-nommu.h b/include/asm-arm/page-nommu.h deleted file mode 100644 index ea1cde84f500..000000000000 --- a/include/asm-arm/page-nommu.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/include/asm-arm/page-nommu.h - * - * Copyright (C) 2004 Hyok S. Choi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _ASMARM_PAGE_NOMMU_H -#define _ASMARM_PAGE_NOMMU_H - -#if !defined(CONFIG_SMALL_TASKS) && PAGE_SHIFT < 13 -#define KTHREAD_SIZE (8192) -#else -#define KTHREAD_SIZE PAGE_SIZE -#endif - -#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -#define free_user_page(page, addr) free_page(addr) - -#define clear_page(page) memset((page), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) - -#define clear_user_page(page, vaddr, pg) clear_page(page) -#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) - -/* - * These are used to make use of C type-checking.. - */ -typedef unsigned long pte_t; -typedef unsigned long pmd_t; -typedef unsigned long pgd_t[2]; -typedef unsigned long pgprot_t; - -#define pte_val(x) (x) -#define pmd_val(x) (x) -#define pgd_val(x) ((x)[0]) -#define pgprot_val(x) (x) - -#define __pte(x) (x) -#define __pmd(x) (x) -#define __pgprot(x) (x) - -extern unsigned long memory_start; -extern unsigned long memory_end; - -#endif diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h deleted file mode 100644 index 7c5fc5582e5d..000000000000 --- a/include/asm-arm/page.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * linux/include/asm-arm/page.h - * - * Copyright (C) 1995-2003 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_PAGE_H -#define _ASMARM_PAGE_H - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#ifndef __ASSEMBLY__ - -#ifndef CONFIG_MMU - -#include "page-nommu.h" - -#else - -#include - -/* - * User Space Model - * ================ - * - * This section selects the correct set of functions for dealing with - * page-based copying and clearing for user space for the particular - * processor(s) we're building for. - * - * We have the following to choose from: - * v3 - ARMv3 - * v4wt - ARMv4 with writethrough cache, without minicache - * v4wb - ARMv4 with writeback cache, without minicache - * v4_mc - ARMv4 with minicache - * xscale - Xscale - * xsc3 - XScalev3 - */ -#undef _USER -#undef MULTI_USER - -#ifdef CONFIG_CPU_COPY_V3 -# ifdef _USER -# define MULTI_USER 1 -# else -# define _USER v3 -# endif -#endif - -#ifdef CONFIG_CPU_COPY_V4WT -# ifdef _USER -# define MULTI_USER 1 -# else -# define _USER v4wt -# endif -#endif - -#ifdef CONFIG_CPU_COPY_V4WB -# ifdef _USER -# define MULTI_USER 1 -# else -# define _USER v4wb -# endif -#endif - -#ifdef CONFIG_CPU_COPY_FEROCEON -# ifdef _USER -# define MULTI_USER 1 -# else -# define _USER feroceon -# endif -#endif - -#ifdef CONFIG_CPU_SA1100 -# ifdef _USER -# define MULTI_USER 1 -# else -# define _USER v4_mc -# endif -#endif - -#ifdef CONFIG_CPU_XSCALE -# ifdef _USER -# define MULTI_USER 1 -# else -# define _USER xscale_mc -# endif -#endif - -#ifdef CONFIG_CPU_XSC3 -# ifdef _USER -# define MULTI_USER 1 -# else -# define _USER xsc3_mc -# endif -#endif - -#ifdef CONFIG_CPU_COPY_V6 -# define MULTI_USER 1 -#endif - -#if !defined(_USER) && !defined(MULTI_USER) -#error Unknown user operations model -#endif - -struct cpu_user_fns { - void (*cpu_clear_user_page)(void *p, unsigned long user); - void (*cpu_copy_user_page)(void *to, const void *from, - unsigned long user); -}; - -#ifdef MULTI_USER -extern struct cpu_user_fns cpu_user; - -#define __cpu_clear_user_page cpu_user.cpu_clear_user_page -#define __cpu_copy_user_page cpu_user.cpu_copy_user_page - -#else - -#define __cpu_clear_user_page __glue(_USER,_clear_user_page) -#define __cpu_copy_user_page __glue(_USER,_copy_user_page) - -extern void __cpu_clear_user_page(void *p, unsigned long user); -extern void __cpu_copy_user_page(void *to, const void *from, - unsigned long user); -#endif - -#define clear_user_page(addr,vaddr,pg) __cpu_clear_user_page(addr, vaddr) -#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr) - -#define clear_page(page) memzero((void *)(page), PAGE_SIZE) -extern void copy_page(void *to, const void *from); - -#undef STRICT_MM_TYPECHECKS - -#ifdef STRICT_MM_TYPECHECKS -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pmd; } pmd_t; -typedef struct { unsigned long pgd[2]; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((x).pmd) -#define pgd_val(x) ((x).pgd[0]) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -#else -/* - * .. while these make it easier on the compiler - */ -typedef unsigned long pte_t; -typedef unsigned long pmd_t; -typedef unsigned long pgd_t[2]; -typedef unsigned long pgprot_t; - -#define pte_val(x) (x) -#define pmd_val(x) (x) -#define pgd_val(x) ((x)[0]) -#define pgprot_val(x) (x) - -#define __pte(x) (x) -#define __pmd(x) (x) -#define __pgprot(x) (x) - -#endif /* STRICT_MM_TYPECHECKS */ - -#endif /* CONFIG_MMU */ - -typedef struct page *pgtable_t; - -#include - -#endif /* !__ASSEMBLY__ */ - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -/* - * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers. - */ -#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) -#define ARCH_SLAB_MINALIGN 8 -#endif - -#include - -#endif diff --git a/include/asm-arm/param.h b/include/asm-arm/param.h deleted file mode 100644 index 15806468ba72..000000000000 --- a/include/asm-arm/param.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/include/asm-arm/param.h - * - * Copyright (C) 1995-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_PARAM_H -#define __ASM_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* User interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#else -# define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -/* max length of hostname */ -#define MAXHOSTNAMELEN 64 - -#endif - diff --git a/include/asm-arm/parport.h b/include/asm-arm/parport.h deleted file mode 100644 index f2f90c76ddd1..000000000000 --- a/include/asm-arm/parport.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-arm/parport.h: ARM-specific parport initialisation - * - * Copyright (C) 1999, 2000 Tim Waugh - * - * This file should only be included by drivers/parport/parport_pc.c. - */ - -#ifndef __ASMARM_PARPORT_H -#define __ASMARM_PARPORT_H - -static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); -static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) -{ - return parport_pc_find_isa_ports (autoirq, autodma); -} - -#endif /* !(_ASMARM_PARPORT_H) */ diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h deleted file mode 100644 index 2d84792f2e12..000000000000 --- a/include/asm-arm/pci.h +++ /dev/null @@ -1,91 +0,0 @@ -#ifndef ASMARM_PCI_H -#define ASMARM_PCI_H - -#ifdef __KERNEL__ -#include - -#include /* for PCIBIOS_MIN_* */ - -#define pcibios_scan_all_fns(a, b) 0 - -#ifdef CONFIG_PCI_HOST_ITE8152 -/* ITE bridge requires setting latency timer to avoid early bus access - termination by PIC bus mater devices -*/ -extern void pcibios_set_master(struct pci_dev *dev); -#else -static inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} -#endif - -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - -/* - * The PCI address space does equal the physical memory address space. - * The networking and block device layers use this boolean for bounce - * buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (0) - -/* - * Whether pci_unmap_{single,page} is a nop depends upon the - * configuration. - */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME; -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME; -#define pci_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL)) - -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - *strat = PCI_DMA_BURST_INFINITY; - *strategy_parameter = ~0UL; -} -#endif - -#define HAVE_PCI_MMAP -extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine); - -extern void -pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res); - -extern void -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region); - -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - -/* - * Dummy implementation; always return 0. - */ -static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) -{ - return 0; -} - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-arm/percpu.h b/include/asm-arm/percpu.h deleted file mode 100644 index b4e32d8ec072..000000000000 --- a/include/asm-arm/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARM_PERCPU -#define __ARM_PERCPU - -#include - -#endif diff --git a/include/asm-arm/pgalloc.h b/include/asm-arm/pgalloc.h deleted file mode 100644 index 163b0305dd76..000000000000 --- a/include/asm-arm/pgalloc.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - * linux/include/asm-arm/pgalloc.h - * - * Copyright (C) 2000-2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_PGALLOC_H -#define _ASMARM_PGALLOC_H - -#include -#include -#include -#include -#include - -#define check_pgt_cache() do { } while (0) - -#ifdef CONFIG_MMU - -#define _PAGE_USER_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER)) -#define _PAGE_KERNEL_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL)) - -/* - * Since we have only two-level page tables, these are trivial - */ -#define pmd_alloc_one(mm,addr) ({ BUG(); ((pmd_t *)2); }) -#define pmd_free(mm, pmd) do { } while (0) -#define pgd_populate(mm,pmd,pte) BUG() - -extern pgd_t *get_pgd_slow(struct mm_struct *mm); -extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd); - -#define pgd_alloc(mm) get_pgd_slow(mm) -#define pgd_free(mm, pgd) free_pgd_slow(mm, pgd) - -/* - * Allocate one PTE table. - * - * This actually allocates two hardware PTE tables, but we wrap this up - * into one table thus: - * - * +------------+ - * | h/w pt 0 | - * +------------+ - * | h/w pt 1 | - * +------------+ - * | Linux pt 0 | - * +------------+ - * | Linux pt 1 | - * +------------+ - */ -static inline pte_t * -pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr) -{ - pte_t *pte; - - pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); - if (pte) { - clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE); - pte += PTRS_PER_PTE; - } - - return pte; -} - -static inline pgtable_t -pte_alloc_one(struct mm_struct *mm, unsigned long addr) -{ - struct page *pte; - - pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); - if (pte) { - void *page = page_address(pte); - clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE); - pgtable_page_ctor(pte); - } - - return pte; -} - -/* - * Free one PTE table. - */ -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - if (pte) { - pte -= PTRS_PER_PTE; - free_page((unsigned long)pte); - } -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t pte) -{ - pgtable_page_dtor(pte); - __free_page(pte); -} - -static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval) -{ - pmdp[0] = __pmd(pmdval); - pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); - flush_pmd_entry(pmdp); -} - -/* - * Populate the pmdp entry with a pointer to the pte. This pmd is part - * of the mm address space. - * - * Ensure that we always set both PMD entries. - */ -static inline void -pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep) -{ - unsigned long pte_ptr = (unsigned long)ptep; - - /* - * The pmd must be loaded with the physical - * address of the PTE table - */ - pte_ptr -= PTRS_PER_PTE * sizeof(void *); - __pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE); -} - -static inline void -pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep) -{ - __pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -#endif /* CONFIG_MMU */ - -#endif diff --git a/include/asm-arm/pgtable-hwdef.h b/include/asm-arm/pgtable-hwdef.h deleted file mode 100644 index f3b5120c99fe..000000000000 --- a/include/asm-arm/pgtable-hwdef.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * linux/include/asm-arm/pgtable-hwdef.h - * - * Copyright (C) 1995-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_PGTABLE_HWDEF_H -#define _ASMARM_PGTABLE_HWDEF_H - -/* - * Hardware page table definitions. - * - * + Level 1 descriptor (PMD) - * - common - */ -#define PMD_TYPE_MASK (3 << 0) -#define PMD_TYPE_FAULT (0 << 0) -#define PMD_TYPE_TABLE (1 << 0) -#define PMD_TYPE_SECT (2 << 0) -#define PMD_BIT4 (1 << 4) -#define PMD_DOMAIN(x) ((x) << 5) -#define PMD_PROTECTION (1 << 9) /* v5 */ -/* - * - section - */ -#define PMD_SECT_BUFFERABLE (1 << 2) -#define PMD_SECT_CACHEABLE (1 << 3) -#define PMD_SECT_XN (1 << 4) /* v6 */ -#define PMD_SECT_AP_WRITE (1 << 10) -#define PMD_SECT_AP_READ (1 << 11) -#define PMD_SECT_TEX(x) ((x) << 12) /* v5 */ -#define PMD_SECT_APX (1 << 15) /* v6 */ -#define PMD_SECT_S (1 << 16) /* v6 */ -#define PMD_SECT_nG (1 << 17) /* v6 */ -#define PMD_SECT_SUPER (1 << 18) /* v6 */ - -#define PMD_SECT_UNCACHED (0) -#define PMD_SECT_BUFFERED (PMD_SECT_BUFFERABLE) -#define PMD_SECT_WT (PMD_SECT_CACHEABLE) -#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) -#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE) -#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) -#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2)) - -/* - * - coarse table (not used) - */ - -/* - * + Level 2 descriptor (PTE) - * - common - */ -#define PTE_TYPE_MASK (3 << 0) -#define PTE_TYPE_FAULT (0 << 0) -#define PTE_TYPE_LARGE (1 << 0) -#define PTE_TYPE_SMALL (2 << 0) -#define PTE_TYPE_EXT (3 << 0) /* v5 */ -#define PTE_BUFFERABLE (1 << 2) -#define PTE_CACHEABLE (1 << 3) - -/* - * - extended small page/tiny page - */ -#define PTE_EXT_XN (1 << 0) /* v6 */ -#define PTE_EXT_AP_MASK (3 << 4) -#define PTE_EXT_AP0 (1 << 4) -#define PTE_EXT_AP1 (2 << 4) -#define PTE_EXT_AP_UNO_SRO (0 << 4) -#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0) -#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1) -#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0) -#define PTE_EXT_TEX(x) ((x) << 6) /* v5 */ -#define PTE_EXT_APX (1 << 9) /* v6 */ -#define PTE_EXT_COHERENT (1 << 9) /* XScale3 */ -#define PTE_EXT_SHARED (1 << 10) /* v6 */ -#define PTE_EXT_NG (1 << 11) /* v6 */ - -/* - * - small page - */ -#define PTE_SMALL_AP_MASK (0xff << 4) -#define PTE_SMALL_AP_UNO_SRO (0x00 << 4) -#define PTE_SMALL_AP_UNO_SRW (0x55 << 4) -#define PTE_SMALL_AP_URO_SRW (0xaa << 4) -#define PTE_SMALL_AP_URW_SRW (0xff << 4) - -#endif diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h deleted file mode 100644 index 386fcc10a973..000000000000 --- a/include/asm-arm/pgtable-nommu.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - * linux/include/asm-arm/pgtable-nommu.h - * - * Copyright (C) 1995-2002 Russell King - * Copyright (C) 2004 Hyok S. Choi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_PGTABLE_NOMMU_H -#define _ASMARM_PGTABLE_NOMMU_H - -#ifndef __ASSEMBLY__ - -#include -#include -#include - -/* - * Trivial page table functions. - */ -#define pgd_present(pgd) (1) -#define pgd_none(pgd) (0) -#define pgd_bad(pgd) (0) -#define pgd_clear(pgdp) -#define kern_addr_valid(addr) (1) -#define pmd_offset(a, b) ((void *)0) -/* FIXME */ -/* - * PMD_SHIFT determines the size of the area a second-level page table can map - * PGDIR_SHIFT determines what a third-level page table entry can map - */ -#define PGDIR_SHIFT 21 - -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) -/* FIXME */ - -#define PAGE_NONE __pgprot(0) -#define PAGE_SHARED __pgprot(0) -#define PAGE_COPY __pgprot(0) -#define PAGE_READONLY __pgprot(0) -#define PAGE_KERNEL __pgprot(0) - -#define swapper_pg_dir ((pgd_t *) 0) - -#define __swp_type(x) (0) -#define __swp_offset(x) (0) -#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - - -typedef pte_t *pte_addr_t; - -static inline int pte_file(pte_t pte) { return 0; } - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -#define ZERO_PAGE(vaddr) (virt_to_page(0)) - -/* - * Mark the prot value as uncacheable and unbufferable. - */ -#define pgprot_noncached(prot) __pgprot(0) -#define pgprot_writecombine(prot) __pgprot(0) - - -/* - * These would be in other places but having them here reduces the diffs. - */ -extern unsigned int kobjsize(const void *objp); - -/* - * No page table caches to initialise. - */ -#define pgtable_cache_init() do { } while (0) -#define io_remap_page_range remap_page_range -#define io_remap_pfn_range remap_pfn_range - - -/* - * All 32bit addresses are effectively valid for vmalloc... - * Sort of meaningless for non-VM targets. - */ -#define VMALLOC_START 0 -#define VMALLOC_END 0xffffffff - -#define FIRST_USER_ADDRESS (0) - -#include - -#else - -/* - * dummy tlb and user structures. - */ -#define v3_tlb_fns (0) -#define v4_tlb_fns (0) -#define v4wb_tlb_fns (0) -#define v4wbi_tlb_fns (0) -#define v6wbi_tlb_fns (0) -#define v7wbi_tlb_fns (0) - -#define v3_user_fns (0) -#define v4_user_fns (0) -#define v4_mc_user_fns (0) -#define v4wb_user_fns (0) -#define v4wt_user_fns (0) -#define v6_user_fns (0) -#define xscale_mc_user_fns (0) - -#endif /*__ASSEMBLY__*/ - -#endif /* _ASMARM_PGTABLE_H */ diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h deleted file mode 100644 index 5571c13c3f3b..000000000000 --- a/include/asm-arm/pgtable.h +++ /dev/null @@ -1,401 +0,0 @@ -/* - * linux/include/asm-arm/pgtable.h - * - * Copyright (C) 1995-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_PGTABLE_H -#define _ASMARM_PGTABLE_H - -#include -#include - -#ifndef CONFIG_MMU - -#include "pgtable-nommu.h" - -#else - -#include -#include -#include - -/* - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - * - * Note that platforms may override VMALLOC_START, but they must provide - * VMALLOC_END. VMALLOC_END defines the (exclusive) limit of this space, - * which may not overlap IO space. - */ -#ifndef VMALLOC_START -#define VMALLOC_OFFSET (8*1024*1024) -#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) -#endif - -/* - * Hardware-wise, we have a two level page table structure, where the first - * level has 4096 entries, and the second level has 256 entries. Each entry - * is one 32-bit word. Most of the bits in the second level entry are used - * by hardware, and there aren't any "accessed" and "dirty" bits. - * - * Linux on the other hand has a three level page table structure, which can - * be wrapped to fit a two level page table structure easily - using the PGD - * and PTE only. However, Linux also expects one "PTE" table per page, and - * at least a "dirty" bit. - * - * Therefore, we tweak the implementation slightly - we tell Linux that we - * have 2048 entries in the first level, each of which is 8 bytes (iow, two - * hardware pointers to the second level.) The second level contains two - * hardware PTE tables arranged contiguously, followed by Linux versions - * which contain the state information Linux needs. We, therefore, end up - * with 512 entries in the "PTE" level. - * - * This leads to the page tables having the following layout: - * - * pgd pte - * | | - * +--------+ +0 - * | |-----> +------------+ +0 - * +- - - - + +4 | h/w pt 0 | - * | |-----> +------------+ +1024 - * +--------+ +8 | h/w pt 1 | - * | | +------------+ +2048 - * +- - - - + | Linux pt 0 | - * | | +------------+ +3072 - * +--------+ | Linux pt 1 | - * | | +------------+ +4096 - * - * See L_PTE_xxx below for definitions of bits in the "Linux pt", and - * PTE_xxx for definitions of bits appearing in the "h/w pt". - * - * PMD_xxx definitions refer to bits in the first level page table. - * - * The "dirty" bit is emulated by only granting hardware write permission - * iff the page is marked "writable" and "dirty" in the Linux PTE. This - * means that a write to a clean page will cause a permission fault, and - * the Linux MM layer will mark the page dirty via handle_pte_fault(). - * For the hardware to notice the permission change, the TLB entry must - * be flushed, and ptep_set_access_flags() does that for us. - * - * The "accessed" or "young" bit is emulated by a similar method; we only - * allow accesses to the page if the "young" bit is set. Accesses to the - * page will cause a fault, and handle_pte_fault() will set the young bit - * for us as long as the page is marked present in the corresponding Linux - * PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is - * up to date. - * - * However, when the "young" bit is cleared, we deny access to the page - * by clearing the hardware PTE. Currently Linux does not flush the TLB - * for us in this case, which means the TLB will retain the transation - * until either the TLB entry is evicted under pressure, or a context - * switch which changes the user space mapping occurs. - */ -#define PTRS_PER_PTE 512 -#define PTRS_PER_PMD 1 -#define PTRS_PER_PGD 2048 - -/* - * PMD_SHIFT determines the size of the area a second-level page table can map - * PGDIR_SHIFT determines what a third-level page table entry can map - */ -#define PMD_SHIFT 21 -#define PGDIR_SHIFT 21 - -#define LIBRARY_TEXT_START 0x0c000000 - -#ifndef __ASSEMBLY__ -extern void __pte_error(const char *file, int line, unsigned long val); -extern void __pmd_error(const char *file, int line, unsigned long val); -extern void __pgd_error(const char *file, int line, unsigned long val); - -#define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte_val(pte)) -#define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd_val(pmd)) -#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd_val(pgd)) -#endif /* !__ASSEMBLY__ */ - -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* - * This is the lowest virtual address we can permit any user space - * mapping to be mapped at. This is particularly important for - * non-high vector CPUs. - */ -#define FIRST_USER_ADDRESS PAGE_SIZE - -#define FIRST_USER_PGD_NR 1 -#define USER_PTRS_PER_PGD ((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR) - -/* - * section address mask and size definitions. - */ -#define SECTION_SHIFT 20 -#define SECTION_SIZE (1UL << SECTION_SHIFT) -#define SECTION_MASK (~(SECTION_SIZE-1)) - -/* - * ARMv6 supersection address mask and size definitions. - */ -#define SUPERSECTION_SHIFT 24 -#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT) -#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1)) - -/* - * "Linux" PTE definitions. - * - * We keep two sets of PTEs - the hardware and the linux version. - * This allows greater flexibility in the way we map the Linux bits - * onto the hardware tables, and allows us to have YOUNG and DIRTY - * bits. - * - * The PTE table pointer refers to the hardware entries; the "Linux" - * entries are stored 1024 bytes below. - */ -#define L_PTE_PRESENT (1 << 0) -#define L_PTE_FILE (1 << 1) /* only when !PRESENT */ -#define L_PTE_YOUNG (1 << 1) -#define L_PTE_BUFFERABLE (1 << 2) /* matches PTE */ -#define L_PTE_CACHEABLE (1 << 3) /* matches PTE */ -#define L_PTE_USER (1 << 4) -#define L_PTE_WRITE (1 << 5) -#define L_PTE_EXEC (1 << 6) -#define L_PTE_DIRTY (1 << 7) -#define L_PTE_SHARED (1 << 10) /* shared(v6), coherent(xsc3) */ - -#ifndef __ASSEMBLY__ - -/* - * The pgprot_* and protection_map entries will be fixed up in runtime - * to include the cachable and bufferable bits based on memory policy, - * as well as any architecture dependent bits like global/ASID and SMP - * shared mapping bits. - */ -#define _L_PTE_DEFAULT L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE -#define _L_PTE_READ L_PTE_USER | L_PTE_EXEC - -extern pgprot_t pgprot_user; -extern pgprot_t pgprot_kernel; - -#define PAGE_NONE pgprot_user -#define PAGE_COPY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ) -#define PAGE_SHARED __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \ - L_PTE_WRITE) -#define PAGE_READONLY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ) -#define PAGE_KERNEL pgprot_kernel - -#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT) -#define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ) -#define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE) -#define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ) - -#endif /* __ASSEMBLY__ */ - -/* - * The table below defines the page protection levels that we insert into our - * Linux page table version. These get translated into the best that the - * architecture can perform. Note that on most ARM hardware: - * 1) We cannot do execute protection - * 2) If we could do execute protection, then read is implied - * 3) write implies read permissions - */ -#define __P000 __PAGE_NONE -#define __P001 __PAGE_READONLY -#define __P010 __PAGE_COPY -#define __P011 __PAGE_COPY -#define __P100 __PAGE_READONLY -#define __P101 __PAGE_READONLY -#define __P110 __PAGE_COPY -#define __P111 __PAGE_COPY - -#define __S000 __PAGE_NONE -#define __S001 __PAGE_READONLY -#define __S010 __PAGE_SHARED -#define __S011 __PAGE_SHARED -#define __S100 __PAGE_READONLY -#define __S101 __PAGE_READONLY -#define __S110 __PAGE_SHARED -#define __S111 __PAGE_SHARED - -#ifndef __ASSEMBLY__ -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern struct page *empty_zero_page; -#define ZERO_PAGE(vaddr) (empty_zero_page) - -#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) -#define pfn_pte(pfn,prot) (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))) - -#define pte_none(pte) (!pte_val(pte)) -#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) -#define pte_page(pte) (pfn_to_page(pte_pfn(pte))) -#define pte_offset_kernel(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) -#define pte_offset_map(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) -#define pte_offset_map_nested(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr)) -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) - -#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) - -#define set_pte_at(mm,addr,ptep,pteval) do { \ - set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \ - } while (0) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) -#define pte_write(pte) (pte_val(pte) & L_PTE_WRITE) -#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) -#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) -#define pte_special(pte) (0) - -/* - * The following only works if pte_present() is not true. - */ -#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) -#define pte_to_pgoff(x) (pte_val(x) >> 2) -#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE) - -#define PTE_FILE_MAX_BITS 30 - -#define PTE_BIT_FUNC(fn,op) \ -static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } - -PTE_BIT_FUNC(wrprotect, &= ~L_PTE_WRITE); -PTE_BIT_FUNC(mkwrite, |= L_PTE_WRITE); -PTE_BIT_FUNC(mkclean, &= ~L_PTE_DIRTY); -PTE_BIT_FUNC(mkdirty, |= L_PTE_DIRTY); -PTE_BIT_FUNC(mkold, &= ~L_PTE_YOUNG); -PTE_BIT_FUNC(mkyoung, |= L_PTE_YOUNG); - -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - -/* - * Mark the prot value as uncacheable and unbufferable. - */ -#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) & ~(L_PTE_CACHEABLE | L_PTE_BUFFERABLE)) -#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~L_PTE_CACHEABLE) - -#define pmd_none(pmd) (!pmd_val(pmd)) -#define pmd_present(pmd) (pmd_val(pmd)) -#define pmd_bad(pmd) (pmd_val(pmd) & 2) - -#define copy_pmd(pmdpd,pmdps) \ - do { \ - pmdpd[0] = pmdps[0]; \ - pmdpd[1] = pmdps[1]; \ - flush_pmd_entry(pmdpd); \ - } while (0) - -#define pmd_clear(pmdp) \ - do { \ - pmdp[0] = __pmd(0); \ - pmdp[1] = __pmd(0); \ - clean_pmd_entry(pmdp); \ - } while (0) - -static inline pte_t *pmd_page_vaddr(pmd_t pmd) -{ - unsigned long ptr; - - ptr = pmd_val(pmd) & ~(PTRS_PER_PTE * sizeof(void *) - 1); - ptr += PTRS_PER_PTE * sizeof(void *); - - return __va(ptr); -} - -#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd))) - -/* - * Permanent address of a page. We never have highmem, so this is trivial. - */ -#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ -#define mk_pte(page,prot) pfn_pte(page_to_pfn(page),prot) - -/* - * The "pgd_xxx()" functions here are trivial for a folded two-level - * setup: the pgd is never bad, and a pmd always exists (as it's folded - * into the pgd entry) - */ -#define pgd_none(pgd) (0) -#define pgd_bad(pgd) (0) -#define pgd_present(pgd) (1) -#define pgd_clear(pgdp) do { } while (0) -#define set_pgd(pgd,pgdp) do { } while (0) - -/* to find an entry in a page-table-directory */ -#define pgd_index(addr) ((addr) >> PGDIR_SHIFT) - -#define pgd_offset(mm, addr) ((mm)->pgd+pgd_index(addr)) - -/* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(addr) pgd_offset(&init_mm, addr) - -/* Find an entry in the second-level page table.. */ -#define pmd_offset(dir, addr) ((pmd_t *)(dir)) - -/* Find an entry in the third-level page table.. */ -#define __pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - const unsigned long mask = L_PTE_EXEC | L_PTE_WRITE | L_PTE_USER; - pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); - return pte; -} - -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; - -/* Encode and decode a swap entry. - * - * We support up to 32GB of swap on 4k machines - */ -#define __swp_type(x) (((x).val >> 2) & 0x7f) -#define __swp_offset(x) ((x).val >> 9) -#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val }) - -/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ -/* FIXME: this is not correct */ -#define kern_addr_valid(addr) (1) - -#include - -/* - * We provide our own arch_get_unmapped_area to cope with VIPT caches. - */ -#define HAVE_ARCH_UNMAPPED_AREA - -/* - * remap a physical page `pfn' of size `size' with page protection `prot' - * into virtual address `from' - */ -#define io_remap_pfn_range(vma,from,pfn,size,prot) \ - remap_pfn_range(vma, from, pfn, size, prot) - -#define pgtable_cache_init() do { } while (0) - -#endif /* !__ASSEMBLY__ */ - -#endif /* CONFIG_MMU */ - -#endif /* _ASMARM_PGTABLE_H */ diff --git a/include/asm-arm/poll.h b/include/asm-arm/poll.h deleted file mode 100644 index c98509d3149e..000000000000 --- a/include/asm-arm/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-arm/posix_types.h b/include/asm-arm/posix_types.h deleted file mode 100644 index c37379dadcb2..000000000000 --- a/include/asm-arm/posix_types.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * linux/include/asm-arm/posix_types.h - * - * Copyright (C) 1996-1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 27-06-1996 RMK Created - */ -#ifndef __ARCH_ARM_POSIX_TYPES_H -#define __ARCH_ARM_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#if defined(__KERNEL__) - -#undef __FD_SET -#define __FD_SET(fd, fdsetp) \ - (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] |= (1<<((fd) & 31))) - -#undef __FD_CLR -#define __FD_CLR(fd, fdsetp) \ - (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] &= ~(1<<((fd) & 31))) - -#undef __FD_ISSET -#define __FD_ISSET(fd, fdsetp) \ - ((((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] & (1<<((fd) & 31))) != 0) - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) \ - (memset (fdsetp, 0, sizeof (*(fd_set *)(fdsetp)))) - -#endif - -#endif diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h deleted file mode 100644 index 75ec760f4c74..000000000000 --- a/include/asm-arm/proc-fns.h +++ /dev/null @@ -1,241 +0,0 @@ -/* - * linux/include/asm-arm/proc-fns.h - * - * Copyright (C) 1997-1999 Russell King - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_PROCFNS_H -#define __ASM_PROCFNS_H - -#ifdef __KERNEL__ - - -/* - * Work out if we need multiple CPU support - */ -#undef MULTI_CPU -#undef CPU_NAME - -/* - * CPU_NAME - the prefix for CPU related functions - */ - -#ifdef CONFIG_CPU_32 -# ifdef CONFIG_CPU_ARM610 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm6 -# endif -# endif -# ifdef CONFIG_CPU_ARM7TDMI -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm7tdmi -# endif -# endif -# ifdef CONFIG_CPU_ARM710 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm7 -# endif -# endif -# ifdef CONFIG_CPU_ARM720T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm720 -# endif -# endif -# ifdef CONFIG_CPU_ARM740T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm740 -# endif -# endif -# ifdef CONFIG_CPU_ARM9TDMI -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm9tdmi -# endif -# endif -# ifdef CONFIG_CPU_ARM920T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm920 -# endif -# endif -# ifdef CONFIG_CPU_ARM922T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm922 -# endif -# endif -# ifdef CONFIG_CPU_ARM925T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm925 -# endif -# endif -# ifdef CONFIG_CPU_ARM926T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm926 -# endif -# endif -# ifdef CONFIG_CPU_ARM940T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm940 -# endif -# endif -# ifdef CONFIG_CPU_ARM946E -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm946 -# endif -# endif -# ifdef CONFIG_CPU_SA110 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_sa110 -# endif -# endif -# ifdef CONFIG_CPU_SA1100 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_sa1100 -# endif -# endif -# ifdef CONFIG_CPU_ARM1020 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1020 -# endif -# endif -# ifdef CONFIG_CPU_ARM1020E -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1020e -# endif -# endif -# ifdef CONFIG_CPU_ARM1022 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1022 -# endif -# endif -# ifdef CONFIG_CPU_ARM1026 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1026 -# endif -# endif -# ifdef CONFIG_CPU_XSCALE -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_xscale -# endif -# endif -# ifdef CONFIG_CPU_XSC3 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_xsc3 -# endif -# endif -# ifdef CONFIG_CPU_FEROCEON -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_feroceon -# endif -# endif -# ifdef CONFIG_CPU_V6 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_v6 -# endif -# endif -# ifdef CONFIG_CPU_V7 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_v7 -# endif -# endif -#endif - -#ifndef __ASSEMBLY__ - -#ifndef MULTI_CPU -#include -#else -#include -#endif - -#include - -#ifdef CONFIG_MMU - -#define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm) - -#define cpu_get_pgd() \ - ({ \ - unsigned long pg; \ - __asm__("mrc p15, 0, %0, c2, c0, 0" \ - : "=r" (pg) : : "cc"); \ - pg &= ~0x3fff; \ - (pgd_t *)phys_to_virt(pg); \ - }) - -#endif - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* __ASM_PROCFNS_H */ diff --git a/include/asm-arm/processor.h b/include/asm-arm/processor.h deleted file mode 100644 index bd8029e8dc67..000000000000 --- a/include/asm-arm/processor.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - * linux/include/asm-arm/processor.h - * - * Copyright (C) 1995-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_PROCESSOR_H -#define __ASM_ARM_PROCESSOR_H - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -#ifdef __KERNEL__ - -#include -#include - -#ifdef __KERNEL__ -#define STACK_TOP ((current->personality == PER_LINUX_32BIT) ? \ - TASK_SIZE : TASK_SIZE_26) -#define STACK_TOP_MAX TASK_SIZE -#endif - -union debug_insn { - u32 arm; - u16 thumb; -}; - -struct debug_entry { - u32 address; - union debug_insn insn; -}; - -struct debug_info { - int nsaved; - struct debug_entry bp[2]; -}; - -struct thread_struct { - /* fault info */ - unsigned long address; - unsigned long trap_no; - unsigned long error_code; - /* debugging */ - struct debug_info debug; -}; - -#define INIT_THREAD { } - -#ifdef CONFIG_MMU -#define nommu_start_thread(regs) do { } while (0) -#else -#define nommu_start_thread(regs) regs->ARM_r10 = current->mm->start_data -#endif - -#define start_thread(regs,pc,sp) \ -({ \ - unsigned long *stack = (unsigned long *)sp; \ - set_fs(USER_DS); \ - memzero(regs->uregs, sizeof(regs->uregs)); \ - if (current->personality & ADDR_LIMIT_32BIT) \ - regs->ARM_cpsr = USR_MODE; \ - else \ - regs->ARM_cpsr = USR26_MODE; \ - if (elf_hwcap & HWCAP_THUMB && pc & 1) \ - regs->ARM_cpsr |= PSR_T_BIT; \ - regs->ARM_pc = pc & ~1; /* pc */ \ - regs->ARM_sp = sp; /* sp */ \ - regs->ARM_r2 = stack[2]; /* r2 (envp) */ \ - regs->ARM_r1 = stack[1]; /* r1 (argv) */ \ - regs->ARM_r0 = stack[0]; /* r0 (argc) */ \ - nommu_start_thread(regs); \ -}) - -/* Forward declaration, a strange C thing */ -struct task_struct; - -/* Free all resources held by a thread. */ -extern void release_thread(struct task_struct *); - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -unsigned long get_wchan(struct task_struct *p); - -#define cpu_relax() barrier() - -/* - * Create a new kernel thread - */ -extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - -#define task_pt_regs(p) \ - ((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1) - -#define KSTK_EIP(tsk) task_pt_regs(tsk)->ARM_pc -#define KSTK_ESP(tsk) task_pt_regs(tsk)->ARM_sp - -/* - * Prefetching support - only ARMv5. - */ -#if __LINUX_ARM_ARCH__ >= 5 - -#define ARCH_HAS_PREFETCH -static inline void prefetch(const void *ptr) -{ - __asm__ __volatile__( - "pld\t%0" - : - : "o" (*(char *)ptr) - : "cc"); -} - -#define ARCH_HAS_PREFETCHW -#define prefetchw(ptr) prefetch(ptr) - -#define ARCH_HAS_SPINLOCK_PREFETCH -#define spin_lock_prefetch(x) do { } while (0) - -#endif - -#endif - -#endif /* __ASM_ARM_PROCESSOR_H */ diff --git a/include/asm-arm/procinfo.h b/include/asm-arm/procinfo.h deleted file mode 100644 index 4d3c685075e0..000000000000 --- a/include/asm-arm/procinfo.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/include/asm-arm/procinfo.h - * - * Copyright (C) 1996-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_PROCINFO_H -#define __ASM_PROCINFO_H - -#ifdef __KERNEL__ - -struct cpu_tlb_fns; -struct cpu_user_fns; -struct cpu_cache_fns; -struct processor; - -/* - * Note! struct processor is always defined if we're - * using MULTI_CPU, otherwise this entry is unused, - * but still exists. - * - * NOTE! The following structure is defined by assembly - * language, NOT C code. For more information, check: - * arch/arm/mm/proc-*.S and arch/arm/kernel/head.S - */ -struct proc_info_list { - unsigned int cpu_val; - unsigned int cpu_mask; - unsigned long __cpu_mm_mmu_flags; /* used by head.S */ - unsigned long __cpu_io_mmu_flags; /* used by head.S */ - unsigned long __cpu_flush; /* used by head.S */ - const char *arch_name; - const char *elf_name; - unsigned int elf_hwcap; - const char *cpu_name; - struct processor *proc; - struct cpu_tlb_fns *tlb; - struct cpu_user_fns *user; - struct cpu_cache_fns *cache; -}; - -#else /* __KERNEL__ */ -#include -#warning "Please include asm/elf.h instead" -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-arm/ptrace.h b/include/asm-arm/ptrace.h deleted file mode 100644 index 8382b7510f94..000000000000 --- a/include/asm-arm/ptrace.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * linux/include/asm-arm/ptrace.h - * - * Copyright (C) 1996-2003 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_PTRACE_H -#define __ASM_ARM_PTRACE_H - -#include - -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 -/* PTRACE_ATTACH is 16 */ -/* PTRACE_DETACH is 17 */ -#define PTRACE_GETWMMXREGS 18 -#define PTRACE_SETWMMXREGS 19 -/* 20 is unused */ -#define PTRACE_OLDSETOPTIONS 21 -#define PTRACE_GET_THREAD_AREA 22 -#define PTRACE_SET_SYSCALL 23 -/* PTRACE_SYSCALL is 24 */ -#define PTRACE_GETCRUNCHREGS 25 -#define PTRACE_SETCRUNCHREGS 26 - -/* - * PSR bits - */ -#define USR26_MODE 0x00000000 -#define FIQ26_MODE 0x00000001 -#define IRQ26_MODE 0x00000002 -#define SVC26_MODE 0x00000003 -#define USR_MODE 0x00000010 -#define FIQ_MODE 0x00000011 -#define IRQ_MODE 0x00000012 -#define SVC_MODE 0x00000013 -#define ABT_MODE 0x00000017 -#define UND_MODE 0x0000001b -#define SYSTEM_MODE 0x0000001f -#define MODE32_BIT 0x00000010 -#define MODE_MASK 0x0000001f -#define PSR_T_BIT 0x00000020 -#define PSR_F_BIT 0x00000040 -#define PSR_I_BIT 0x00000080 -#define PSR_A_BIT 0x00000100 -#define PSR_J_BIT 0x01000000 -#define PSR_Q_BIT 0x08000000 -#define PSR_V_BIT 0x10000000 -#define PSR_C_BIT 0x20000000 -#define PSR_Z_BIT 0x40000000 -#define PSR_N_BIT 0x80000000 -#define PCMASK 0 - -/* - * Groups of PSR bits - */ -#define PSR_f 0xff000000 /* Flags */ -#define PSR_s 0x00ff0000 /* Status */ -#define PSR_x 0x0000ff00 /* Extension */ -#define PSR_c 0x000000ff /* Control */ - -#ifndef __ASSEMBLY__ - -/* - * This struct defines the way the registers are stored on the - * stack during a system call. Note that sizeof(struct pt_regs) - * has to be a multiple of 8. - */ -struct pt_regs { - long uregs[18]; -}; - -#define ARM_cpsr uregs[16] -#define ARM_pc uregs[15] -#define ARM_lr uregs[14] -#define ARM_sp uregs[13] -#define ARM_ip uregs[12] -#define ARM_fp uregs[11] -#define ARM_r10 uregs[10] -#define ARM_r9 uregs[9] -#define ARM_r8 uregs[8] -#define ARM_r7 uregs[7] -#define ARM_r6 uregs[6] -#define ARM_r5 uregs[5] -#define ARM_r4 uregs[4] -#define ARM_r3 uregs[3] -#define ARM_r2 uregs[2] -#define ARM_r1 uregs[1] -#define ARM_r0 uregs[0] -#define ARM_ORIG_r0 uregs[17] - -#ifdef __KERNEL__ - -#define user_mode(regs) \ - (((regs)->ARM_cpsr & 0xf) == 0) - -#ifdef CONFIG_ARM_THUMB -#define thumb_mode(regs) \ - (((regs)->ARM_cpsr & PSR_T_BIT)) -#else -#define thumb_mode(regs) (0) -#endif - -#define isa_mode(regs) \ - ((((regs)->ARM_cpsr & PSR_J_BIT) >> 23) | \ - (((regs)->ARM_cpsr & PSR_T_BIT) >> 5)) - -#define processor_mode(regs) \ - ((regs)->ARM_cpsr & MODE_MASK) - -#define interrupts_enabled(regs) \ - (!((regs)->ARM_cpsr & PSR_I_BIT)) - -#define fast_interrupts_enabled(regs) \ - (!((regs)->ARM_cpsr & PSR_F_BIT)) - -/* Are the current registers suitable for user mode? - * (used to maintain security in signal handlers) - */ -static inline int valid_user_regs(struct pt_regs *regs) -{ - if (user_mode(regs) && (regs->ARM_cpsr & PSR_I_BIT) == 0) { - regs->ARM_cpsr &= ~(PSR_F_BIT | PSR_A_BIT); - return 1; - } - - /* - * Force CPSR to something logical... - */ - regs->ARM_cpsr &= PSR_f | PSR_s | (PSR_x & ~PSR_A_BIT) | PSR_T_BIT | MODE32_BIT; - if (!(elf_hwcap & HWCAP_26BIT)) - regs->ARM_cpsr |= USR_MODE; - - return 0; -} - -#define pc_pointer(v) \ - ((v) & ~PCMASK) - -#define instruction_pointer(regs) \ - (pc_pointer((regs)->ARM_pc)) - -#ifdef CONFIG_SMP -extern unsigned long profile_pc(struct pt_regs *regs); -#else -#define profile_pc(regs) instruction_pointer(regs) -#endif - -#define predicate(x) ((x) & 0xf0000000) -#define PREDICATE_ALWAYS 0xe0000000 - -#endif /* __KERNEL__ */ - -#endif /* __ASSEMBLY__ */ - -#endif - diff --git a/include/asm-arm/resource.h b/include/asm-arm/resource.h deleted file mode 100644 index 734b581b5b6a..000000000000 --- a/include/asm-arm/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ARM_RESOURCE_H -#define _ARM_RESOURCE_H - -#include - -#endif diff --git a/include/asm-arm/scatterlist.h b/include/asm-arm/scatterlist.h deleted file mode 100644 index ca0a37d03400..000000000000 --- a/include/asm-arm/scatterlist.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _ASMARM_SCATTERLIST_H -#define _ASMARM_SCATTERLIST_H - -#include -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; /* buffer offset */ - dma_addr_t dma_address; /* dma address */ - unsigned int length; /* length */ -}; - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#endif /* _ASMARM_SCATTERLIST_H */ diff --git a/include/asm-arm/sections.h b/include/asm-arm/sections.h deleted file mode 100644 index 2b8c5160388f..000000000000 --- a/include/asm-arm/sections.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-arm/segment.h b/include/asm-arm/segment.h deleted file mode 100644 index 9e24c21f6304..000000000000 --- a/include/asm-arm/segment.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_ARM_SEGMENT_H -#define __ASM_ARM_SEGMENT_H - -#define __KERNEL_CS 0x0 -#define __KERNEL_DS 0x0 - -#define __USER_CS 0x1 -#define __USER_DS 0x1 - -#endif /* __ASM_ARM_SEGMENT_H */ - diff --git a/include/asm-arm/sembuf.h b/include/asm-arm/sembuf.h deleted file mode 100644 index 1c0283954289..000000000000 --- a/include/asm-arm/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASMARM_SEMBUF_H -#define _ASMARM_SEMBUF_H - -/* - * The semid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASMARM_SEMBUF_H */ diff --git a/include/asm-arm/serial.h b/include/asm-arm/serial.h deleted file mode 100644 index 015b262dc145..000000000000 --- a/include/asm-arm/serial.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/serial.h - * - * Copyright (C) 1996 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 15-10-1996 RMK Created - */ - -#ifndef __ASM_SERIAL_H -#define __ASM_SERIAL_H - -#define BASE_BAUD (1843200 / 16) - -#endif diff --git a/include/asm-arm/setup.h b/include/asm-arm/setup.h deleted file mode 100644 index 7bbf105463f1..000000000000 --- a/include/asm-arm/setup.h +++ /dev/null @@ -1,226 +0,0 @@ -/* - * linux/include/asm/setup.h - * - * Copyright (C) 1997-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Structure passed to kernel to tell it about the - * hardware it's running on. See Documentation/arm/Setup - * for more info. - */ -#ifndef __ASMARM_SETUP_H -#define __ASMARM_SETUP_H - -#include - -#define COMMAND_LINE_SIZE 1024 - -/* The list ends with an ATAG_NONE node. */ -#define ATAG_NONE 0x00000000 - -struct tag_header { - __u32 size; - __u32 tag; -}; - -/* The list must start with an ATAG_CORE node */ -#define ATAG_CORE 0x54410001 - -struct tag_core { - __u32 flags; /* bit 0 = read-only */ - __u32 pagesize; - __u32 rootdev; -}; - -/* it is allowed to have multiple ATAG_MEM nodes */ -#define ATAG_MEM 0x54410002 - -struct tag_mem32 { - __u32 size; - __u32 start; /* physical start address */ -}; - -/* VGA text type displays */ -#define ATAG_VIDEOTEXT 0x54410003 - -struct tag_videotext { - __u8 x; - __u8 y; - __u16 video_page; - __u8 video_mode; - __u8 video_cols; - __u16 video_ega_bx; - __u8 video_lines; - __u8 video_isvga; - __u16 video_points; -}; - -/* describes how the ramdisk will be used in kernel */ -#define ATAG_RAMDISK 0x54410004 - -struct tag_ramdisk { - __u32 flags; /* bit 0 = load, bit 1 = prompt */ - __u32 size; /* decompressed ramdisk size in _kilo_ bytes */ - __u32 start; /* starting block of floppy-based RAM disk image */ -}; - -/* describes where the compressed ramdisk image lives (virtual address) */ -/* - * this one accidentally used virtual addresses - as such, - * it's deprecated. - */ -#define ATAG_INITRD 0x54410005 - -/* describes where the compressed ramdisk image lives (physical address) */ -#define ATAG_INITRD2 0x54420005 - -struct tag_initrd { - __u32 start; /* physical start address */ - __u32 size; /* size of compressed ramdisk image in bytes */ -}; - -/* board serial number. "64 bits should be enough for everybody" */ -#define ATAG_SERIAL 0x54410006 - -struct tag_serialnr { - __u32 low; - __u32 high; -}; - -/* board revision */ -#define ATAG_REVISION 0x54410007 - -struct tag_revision { - __u32 rev; -}; - -/* initial values for vesafb-type framebuffers. see struct screen_info - * in include/linux/tty.h - */ -#define ATAG_VIDEOLFB 0x54410008 - -struct tag_videolfb { - __u16 lfb_width; - __u16 lfb_height; - __u16 lfb_depth; - __u16 lfb_linelength; - __u32 lfb_base; - __u32 lfb_size; - __u8 red_size; - __u8 red_pos; - __u8 green_size; - __u8 green_pos; - __u8 blue_size; - __u8 blue_pos; - __u8 rsvd_size; - __u8 rsvd_pos; -}; - -/* command line: \0 terminated string */ -#define ATAG_CMDLINE 0x54410009 - -struct tag_cmdline { - char cmdline[1]; /* this is the minimum size */ -}; - -/* acorn RiscPC specific information */ -#define ATAG_ACORN 0x41000101 - -struct tag_acorn { - __u32 memc_control_reg; - __u32 vram_pages; - __u8 sounddefault; - __u8 adfsdrives; -}; - -/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */ -#define ATAG_MEMCLK 0x41000402 - -struct tag_memclk { - __u32 fmemclk; -}; - -struct tag { - struct tag_header hdr; - union { - struct tag_core core; - struct tag_mem32 mem; - struct tag_videotext videotext; - struct tag_ramdisk ramdisk; - struct tag_initrd initrd; - struct tag_serialnr serialnr; - struct tag_revision revision; - struct tag_videolfb videolfb; - struct tag_cmdline cmdline; - - /* - * Acorn specific - */ - struct tag_acorn acorn; - - /* - * DC21285 specific - */ - struct tag_memclk memclk; - } u; -}; - -struct tagtable { - __u32 tag; - int (*parse)(const struct tag *); -}; - -#define tag_member_present(tag,member) \ - ((unsigned long)(&((struct tag *)0L)->member + 1) \ - <= (tag)->hdr.size * 4) - -#define tag_next(t) ((struct tag *)((__u32 *)(t) + (t)->hdr.size)) -#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2) - -#define for_each_tag(t,base) \ - for (t = base; t->hdr.size; t = tag_next(t)) - -#ifdef __KERNEL__ - -#define __tag __used __attribute__((__section__(".taglist.init"))) -#define __tagtable(tag, fn) \ -static struct tagtable __tagtable_##fn __tag = { tag, fn } - -/* - * Memory map description - */ -#ifdef CONFIG_ARCH_LH7A40X -# define NR_BANKS 16 -#else -# define NR_BANKS 8 -#endif - -struct membank { - unsigned long start; - unsigned long size; - int node; -}; - -struct meminfo { - int nr_banks; - struct membank bank[NR_BANKS]; -}; - -/* - * Early command line parameters. - */ -struct early_params { - const char *arg; - void (*fn)(char **p); -}; - -#define __early_param(name,fn) \ -static struct early_params __early_##fn __used \ -__attribute__((__section__(".early_param.init"))) = { name, fn } - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-arm/shmbuf.h b/include/asm-arm/shmbuf.h deleted file mode 100644 index 2e5c67ba1c97..000000000000 --- a/include/asm-arm/shmbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASMARM_SHMBUF_H -#define _ASMARM_SHMBUF_H - -/* - * The shmid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASMARM_SHMBUF_H */ diff --git a/include/asm-arm/shmparam.h b/include/asm-arm/shmparam.h deleted file mode 100644 index a5223b3a9bf9..000000000000 --- a/include/asm-arm/shmparam.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _ASMARM_SHMPARAM_H -#define _ASMARM_SHMPARAM_H - -/* - * This should be the size of the virtually indexed cache/ways, - * or page size, whichever is greater since the cache aliases - * every size/ways bytes. - */ -#define SHMLBA (4 * PAGE_SIZE) /* attach addr a multiple of this */ - -/* - * Enforce SHMLBA in shmat - */ -#define __ARCH_FORCE_SHMLBA - -#endif /* _ASMARM_SHMPARAM_H */ diff --git a/include/asm-arm/sigcontext.h b/include/asm-arm/sigcontext.h deleted file mode 100644 index fc0b80b6a6fc..000000000000 --- a/include/asm-arm/sigcontext.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef _ASMARM_SIGCONTEXT_H -#define _ASMARM_SIGCONTEXT_H - -/* - * Signal context structure - contains all info to do with the state - * before the signal handler was invoked. Note: only add new entries - * to the end of the structure. - */ -struct sigcontext { - unsigned long trap_no; - unsigned long error_code; - unsigned long oldmask; - unsigned long arm_r0; - unsigned long arm_r1; - unsigned long arm_r2; - unsigned long arm_r3; - unsigned long arm_r4; - unsigned long arm_r5; - unsigned long arm_r6; - unsigned long arm_r7; - unsigned long arm_r8; - unsigned long arm_r9; - unsigned long arm_r10; - unsigned long arm_fp; - unsigned long arm_ip; - unsigned long arm_sp; - unsigned long arm_lr; - unsigned long arm_pc; - unsigned long arm_cpsr; - unsigned long fault_address; -}; - - -#endif diff --git a/include/asm-arm/siginfo.h b/include/asm-arm/siginfo.h deleted file mode 100644 index 5e21852e6039..000000000000 --- a/include/asm-arm/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASMARM_SIGINFO_H -#define _ASMARM_SIGINFO_H - -#include - -#endif diff --git a/include/asm-arm/signal.h b/include/asm-arm/signal.h deleted file mode 100644 index d0fb487aba4f..000000000000 --- a/include/asm-arm/signal.h +++ /dev/null @@ -1,164 +0,0 @@ -#ifndef _ASMARM_SIGNAL_H -#define _ASMARM_SIGNAL_H - -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -#define SIGSWI 32 - -/* - * SA_FLAGS values: - * - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_SIGINFO deliver the signal with SIGINFO structs - * SA_THIRTYTWO delivers the signal in 32-bit mode, even if the task - * is running in 26-bit. - * SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)). - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NODEFER prevents the current signal from being masked in the handler. - * SA_RESETHAND clears the handler when the signal is delivered. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_THIRTYTWO 0x02000000 -#define SA_RESTORER 0x04000000 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - __sigrestore_t sa_restorer; -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -#include -#define ptrace_signal_deliver(regs, cookie) do { } while (0) -#endif - -#endif diff --git a/include/asm-arm/sizes.h b/include/asm-arm/sizes.h deleted file mode 100644 index 503843db1565..000000000000 --- a/include/asm-arm/sizes.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ -/* Size definitions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ - -#ifndef __sizes_h -#define __sizes_h 1 - -/* handy sizes */ -#define SZ_16 0x00000010 -#define SZ_256 0x00000100 -#define SZ_512 0x00000200 - -#define SZ_1K 0x00000400 -#define SZ_4K 0x00001000 -#define SZ_8K 0x00002000 -#define SZ_16K 0x00004000 -#define SZ_64K 0x00010000 -#define SZ_128K 0x00020000 -#define SZ_256K 0x00040000 -#define SZ_512K 0x00080000 - -#define SZ_1M 0x00100000 -#define SZ_2M 0x00200000 -#define SZ_4M 0x00400000 -#define SZ_8M 0x00800000 -#define SZ_16M 0x01000000 -#define SZ_32M 0x02000000 -#define SZ_64M 0x04000000 -#define SZ_128M 0x08000000 -#define SZ_256M 0x10000000 -#define SZ_512M 0x20000000 - -#define SZ_1G 0x40000000 -#define SZ_2G 0x80000000 - -#endif - -/* END */ diff --git a/include/asm-arm/smp.h b/include/asm-arm/smp.h deleted file mode 100644 index 7fffa2404b8e..000000000000 --- a/include/asm-arm/smp.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * linux/include/asm-arm/smp.h - * - * Copyright (C) 2004-2005 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_SMP_H -#define __ASM_ARM_SMP_H - -#include -#include -#include - -#include - -#ifndef CONFIG_SMP -# error " included in non-SMP build" -#endif - -#define raw_smp_processor_id() (current_thread_info()->cpu) - -/* - * at the moment, there's not a big penalty for changing CPUs - * (the >big< penalty is running SMP in the first place) - */ -#define PROC_CHANGE_PENALTY 15 - -struct seq_file; - -/* - * generate IPI list text - */ -extern void show_ipi_list(struct seq_file *p); - -/* - * Called from assembly code, this handles an IPI. - */ -asmlinkage void do_IPI(struct pt_regs *regs); - -/* - * Setup the SMP cpu_possible_map - */ -extern void smp_init_cpus(void); - -/* - * Move global data into per-processor storage. - */ -extern void smp_store_cpu_info(unsigned int cpuid); - -/* - * Raise an IPI cross call on CPUs in callmap. - */ -extern void smp_cross_call(cpumask_t callmap); - -/* - * Broadcast a timer interrupt to the other CPUs. - */ -extern void smp_send_timer(void); - -/* - * Broadcast a clock event to other CPUs. - */ -extern void smp_timer_broadcast(cpumask_t mask); - -/* - * Boot a secondary CPU, and assign it the specified idle task. - * This also gives us the initial stack to use for this CPU. - */ -extern int boot_secondary(unsigned int cpu, struct task_struct *); - -/* - * Called from platform specific assembly code, this is the - * secondary CPU entry point. - */ -asmlinkage void secondary_start_kernel(void); - -/* - * Perform platform specific initialisation of the specified CPU. - */ -extern void platform_secondary_init(unsigned int cpu); - -/* - * Initial data for bringing up a secondary CPU. - */ -struct secondary_data { - unsigned long pgdir; - void *stack; -}; -extern struct secondary_data secondary_data; - -extern int __cpu_disable(void); -extern int mach_cpu_disable(unsigned int cpu); - -extern void __cpu_die(unsigned int cpu); -extern void cpu_die(void); - -extern void platform_cpu_die(unsigned int cpu); -extern int platform_cpu_kill(unsigned int cpu); -extern void platform_cpu_enable(unsigned int cpu); - -extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi(cpumask_t mask); - -/* - * Local timer interrupt handling function (can be IPI'ed). - */ -extern void local_timer_interrupt(void); - -#ifdef CONFIG_LOCAL_TIMERS - -/* - * Stop a local timer interrupt. - */ -extern void local_timer_stop(unsigned int cpu); - -/* - * Platform provides this to acknowledge a local timer IRQ - */ -extern int local_timer_ack(void); - -#else - -static inline void local_timer_stop(unsigned int cpu) -{ -} - -#endif - -/* - * Setup a local timer interrupt for a CPU. - */ -extern void local_timer_setup(unsigned int cpu); - -/* - * show local interrupt info - */ -extern void show_local_irqs(struct seq_file *); - -/* - * Called from assembly, this is the local timer IRQ handler - */ -asmlinkage void do_local_timer(struct pt_regs *); - -#endif /* ifndef __ASM_ARM_SMP_H */ diff --git a/include/asm-arm/socket.h b/include/asm-arm/socket.h deleted file mode 100644 index 6817be9573a6..000000000000 --- a/include/asm-arm/socket.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _ASMARM_SOCKET_H -#define _ASMARM_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#endif /* _ASM_SOCKET_H */ diff --git a/include/asm-arm/sockios.h b/include/asm-arm/sockios.h deleted file mode 100644 index a2588a2512df..000000000000 --- a/include/asm-arm/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ARCH_ARM_SOCKIOS_H -#define __ARCH_ARM_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif diff --git a/include/asm-arm/sparsemem.h b/include/asm-arm/sparsemem.h deleted file mode 100644 index 277158191a0d..000000000000 --- a/include/asm-arm/sparsemem.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef ASMARM_SPARSEMEM_H -#define ASMARM_SPARSEMEM_H - -#include - -#define MAX_PHYSADDR_BITS 32 -#define MAX_PHYSMEM_BITS 32 -#define SECTION_SIZE_BITS NODE_MEM_SIZE_BITS - -#endif diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h deleted file mode 100644 index 2b41ebbfa7ff..000000000000 --- a/include/asm-arm/spinlock.h +++ /dev/null @@ -1,224 +0,0 @@ -#ifndef __ASM_SPINLOCK_H -#define __ASM_SPINLOCK_H - -#if __LINUX_ARM_ARCH__ < 6 -#error SMP not supported on pre-ARMv6 CPUs -#endif - -/* - * ARMv6 Spin-locking. - * - * We exclusively read the old value. If it is zero, we may have - * won the lock, so we try exclusively storing it. A memory barrier - * is required after we get a lock, and before we release it, because - * V6 CPUs are assumed to have weakly ordered memory. - * - * Unlocked value: 0 - * Locked value: 1 - */ - -#define __raw_spin_is_locked(x) ((x)->lock != 0) -#define __raw_spin_unlock_wait(lock) \ - do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) - -#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) - -static inline void __raw_spin_lock(raw_spinlock_t *lock) -{ - unsigned long tmp; - - __asm__ __volatile__( -"1: ldrex %0, [%1]\n" -" teq %0, #0\n" -#ifdef CONFIG_CPU_32v6K -" wfene\n" -#endif -" strexeq %0, %2, [%1]\n" -" teqeq %0, #0\n" -" bne 1b" - : "=&r" (tmp) - : "r" (&lock->lock), "r" (1) - : "cc"); - - smp_mb(); -} - -static inline int __raw_spin_trylock(raw_spinlock_t *lock) -{ - unsigned long tmp; - - __asm__ __volatile__( -" ldrex %0, [%1]\n" -" teq %0, #0\n" -" strexeq %0, %2, [%1]" - : "=&r" (tmp) - : "r" (&lock->lock), "r" (1) - : "cc"); - - if (tmp == 0) { - smp_mb(); - return 1; - } else { - return 0; - } -} - -static inline void __raw_spin_unlock(raw_spinlock_t *lock) -{ - smp_mb(); - - __asm__ __volatile__( -" str %1, [%0]\n" -#ifdef CONFIG_CPU_32v6K -" mcr p15, 0, %1, c7, c10, 4\n" /* DSB */ -" sev" -#endif - : - : "r" (&lock->lock), "r" (0) - : "cc"); -} - -/* - * RWLOCKS - * - * - * Write locks are easy - we just set bit 31. When unlocking, we can - * just write zero since the lock is exclusively held. - */ - -static inline void __raw_write_lock(raw_rwlock_t *rw) -{ - unsigned long tmp; - - __asm__ __volatile__( -"1: ldrex %0, [%1]\n" -" teq %0, #0\n" -#ifdef CONFIG_CPU_32v6K -" wfene\n" -#endif -" strexeq %0, %2, [%1]\n" -" teq %0, #0\n" -" bne 1b" - : "=&r" (tmp) - : "r" (&rw->lock), "r" (0x80000000) - : "cc"); - - smp_mb(); -} - -static inline int __raw_write_trylock(raw_rwlock_t *rw) -{ - unsigned long tmp; - - __asm__ __volatile__( -"1: ldrex %0, [%1]\n" -" teq %0, #0\n" -" strexeq %0, %2, [%1]" - : "=&r" (tmp) - : "r" (&rw->lock), "r" (0x80000000) - : "cc"); - - if (tmp == 0) { - smp_mb(); - return 1; - } else { - return 0; - } -} - -static inline void __raw_write_unlock(raw_rwlock_t *rw) -{ - smp_mb(); - - __asm__ __volatile__( - "str %1, [%0]\n" -#ifdef CONFIG_CPU_32v6K -" mcr p15, 0, %1, c7, c10, 4\n" /* DSB */ -" sev\n" -#endif - : - : "r" (&rw->lock), "r" (0) - : "cc"); -} - -/* write_can_lock - would write_trylock() succeed? */ -#define __raw_write_can_lock(x) ((x)->lock == 0) - -/* - * Read locks are a bit more hairy: - * - Exclusively load the lock value. - * - Increment it. - * - Store new lock value if positive, and we still own this location. - * If the value is negative, we've already failed. - * - If we failed to store the value, we want a negative result. - * - If we failed, try again. - * Unlocking is similarly hairy. We may have multiple read locks - * currently active. However, we know we won't have any write - * locks. - */ -static inline void __raw_read_lock(raw_rwlock_t *rw) -{ - unsigned long tmp, tmp2; - - __asm__ __volatile__( -"1: ldrex %0, [%2]\n" -" adds %0, %0, #1\n" -" strexpl %1, %0, [%2]\n" -#ifdef CONFIG_CPU_32v6K -" wfemi\n" -#endif -" rsbpls %0, %1, #0\n" -" bmi 1b" - : "=&r" (tmp), "=&r" (tmp2) - : "r" (&rw->lock) - : "cc"); - - smp_mb(); -} - -static inline void __raw_read_unlock(raw_rwlock_t *rw) -{ - unsigned long tmp, tmp2; - - smp_mb(); - - __asm__ __volatile__( -"1: ldrex %0, [%2]\n" -" sub %0, %0, #1\n" -" strex %1, %0, [%2]\n" -" teq %1, #0\n" -" bne 1b" -#ifdef CONFIG_CPU_32v6K -"\n cmp %0, #0\n" -" mcreq p15, 0, %0, c7, c10, 4\n" -" seveq" -#endif - : "=&r" (tmp), "=&r" (tmp2) - : "r" (&rw->lock) - : "cc"); -} - -static inline int __raw_read_trylock(raw_rwlock_t *rw) -{ - unsigned long tmp, tmp2 = 1; - - __asm__ __volatile__( -"1: ldrex %0, [%2]\n" -" adds %0, %0, #1\n" -" strexpl %1, %0, [%2]\n" - : "=&r" (tmp), "+r" (tmp2) - : "r" (&rw->lock) - : "cc"); - - smp_mb(); - return tmp2 == 0; -} - -/* read_can_lock - would read_trylock() succeed? */ -#define __raw_read_can_lock(x) ((x)->lock < 0x80000000) - -#define _raw_spin_relax(lock) cpu_relax() -#define _raw_read_relax(lock) cpu_relax() -#define _raw_write_relax(lock) cpu_relax() - -#endif /* __ASM_SPINLOCK_H */ diff --git a/include/asm-arm/spinlock_types.h b/include/asm-arm/spinlock_types.h deleted file mode 100644 index 43e83f6d2ee5..000000000000 --- a/include/asm-arm/spinlock_types.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_SPINLOCK_TYPES_H -#define __ASM_SPINLOCK_TYPES_H - -#ifndef __LINUX_SPINLOCK_TYPES_H -# error "please don't include this file directly" -#endif - -typedef struct { - volatile unsigned int lock; -} raw_spinlock_t; - -#define __RAW_SPIN_LOCK_UNLOCKED { 0 } - -typedef struct { - volatile unsigned int lock; -} raw_rwlock_t; - -#define __RAW_RW_LOCK_UNLOCKED { 0 } - -#endif diff --git a/include/asm-arm/stat.h b/include/asm-arm/stat.h deleted file mode 100644 index 42c0c13999d5..000000000000 --- a/include/asm-arm/stat.h +++ /dev/null @@ -1,87 +0,0 @@ -#ifndef _ASMARM_STAT_H -#define _ASMARM_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -#define STAT_HAVE_NSEC - -struct stat { -#if defined(__ARMEB__) - unsigned short st_dev; - unsigned short __pad1; -#else - unsigned long st_dev; -#endif - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; -#if defined(__ARMEB__) - unsigned short st_rdev; - unsigned short __pad2; -#else - unsigned long st_rdev; -#endif - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - * Note: The kernel zero's the padded region because glibc might read them - * in the hope that the kernel has stretched to using larger sizes. - */ -struct stat64 { - unsigned long long st_dev; - unsigned char __pad0[4]; - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - unsigned char __pad3[4]; - - long long st_size; - unsigned long st_blksize; - unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long long st_ino; -}; - -#endif diff --git a/include/asm-arm/statfs.h b/include/asm-arm/statfs.h deleted file mode 100644 index a02e6a8c3d70..000000000000 --- a/include/asm-arm/statfs.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASMARM_STATFS_H -#define _ASMARM_STATFS_H - -#ifndef __KERNEL_STRICT_NAMES -# include -typedef __kernel_fsid_t fsid_t; -#endif - -struct statfs { - __u32 f_type; - __u32 f_bsize; - __u32 f_blocks; - __u32 f_bfree; - __u32 f_bavail; - __u32 f_files; - __u32 f_ffree; - __kernel_fsid_t f_fsid; - __u32 f_namelen; - __u32 f_frsize; - __u32 f_spare[5]; -}; - -/* - * With EABI there is 4 bytes of padding added to this structure. - * Let's pack it so the padding goes away to simplify dual ABI support. - * Note that user space does NOT have to pack this structure. - */ -struct statfs64 { - __u32 f_type; - __u32 f_bsize; - __u64 f_blocks; - __u64 f_bfree; - __u64 f_bavail; - __u64 f_files; - __u64 f_ffree; - __kernel_fsid_t f_fsid; - __u32 f_namelen; - __u32 f_frsize; - __u32 f_spare[5]; -} __attribute__ ((packed,aligned(4))); - -#endif diff --git a/include/asm-arm/string.h b/include/asm-arm/string.h deleted file mode 100644 index e50c4a39b699..000000000000 --- a/include/asm-arm/string.h +++ /dev/null @@ -1,50 +0,0 @@ -#ifndef __ASM_ARM_STRING_H -#define __ASM_ARM_STRING_H - -/* - * We don't do inline string functions, since the - * optimised inline asm versions are not small. - */ - -#define __HAVE_ARCH_STRRCHR -extern char * strrchr(const char * s, int c); - -#define __HAVE_ARCH_STRCHR -extern char * strchr(const char * s, int c); - -#define __HAVE_ARCH_MEMCPY -extern void * memcpy(void *, const void *, __kernel_size_t); - -#define __HAVE_ARCH_MEMMOVE -extern void * memmove(void *, const void *, __kernel_size_t); - -#define __HAVE_ARCH_MEMCHR -extern void * memchr(const void *, int, __kernel_size_t); - -#define __HAVE_ARCH_MEMZERO -#define __HAVE_ARCH_MEMSET -extern void * memset(void *, int, __kernel_size_t); - -extern void __memzero(void *ptr, __kernel_size_t n); - -#define memset(p,v,n) \ - ({ \ - void *__p = (p); size_t __n = n; \ - if ((__n) != 0) { \ - if (__builtin_constant_p((v)) && (v) == 0) \ - __memzero((__p),(__n)); \ - else \ - memset((__p),(v),(__n)); \ - } \ - (__p); \ - }) - -#define memzero(p,n) \ - ({ \ - void *__p = (p); size_t __n = n; \ - if ((__n) != 0) \ - __memzero((__p),(__n)); \ - (__p); \ - }) - -#endif diff --git a/include/asm-arm/suspend.h b/include/asm-arm/suspend.h deleted file mode 100644 index cf0d0bdee74d..000000000000 --- a/include/asm-arm/suspend.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _ASMARM_SUSPEND_H -#define _ASMARM_SUSPEND_H - -#endif diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h deleted file mode 100644 index 514af792a598..000000000000 --- a/include/asm-arm/system.h +++ /dev/null @@ -1,388 +0,0 @@ -#ifndef __ASM_ARM_SYSTEM_H -#define __ASM_ARM_SYSTEM_H - -#ifdef __KERNEL__ - -#include - -#define CPU_ARCH_UNKNOWN 0 -#define CPU_ARCH_ARMv3 1 -#define CPU_ARCH_ARMv4 2 -#define CPU_ARCH_ARMv4T 3 -#define CPU_ARCH_ARMv5 4 -#define CPU_ARCH_ARMv5T 5 -#define CPU_ARCH_ARMv5TE 6 -#define CPU_ARCH_ARMv5TEJ 7 -#define CPU_ARCH_ARMv6 8 -#define CPU_ARCH_ARMv7 9 - -/* - * CR1 bits (CP#15 CR1) - */ -#define CR_M (1 << 0) /* MMU enable */ -#define CR_A (1 << 1) /* Alignment abort enable */ -#define CR_C (1 << 2) /* Dcache enable */ -#define CR_W (1 << 3) /* Write buffer enable */ -#define CR_P (1 << 4) /* 32-bit exception handler */ -#define CR_D (1 << 5) /* 32-bit data address range */ -#define CR_L (1 << 6) /* Implementation defined */ -#define CR_B (1 << 7) /* Big endian */ -#define CR_S (1 << 8) /* System MMU protection */ -#define CR_R (1 << 9) /* ROM MMU protection */ -#define CR_F (1 << 10) /* Implementation defined */ -#define CR_Z (1 << 11) /* Implementation defined */ -#define CR_I (1 << 12) /* Icache enable */ -#define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */ -#define CR_RR (1 << 14) /* Round Robin cache replacement */ -#define CR_L4 (1 << 15) /* LDR pc can set T bit */ -#define CR_DT (1 << 16) -#define CR_IT (1 << 18) -#define CR_ST (1 << 19) -#define CR_FI (1 << 21) /* Fast interrupt (lower latency mode) */ -#define CR_U (1 << 22) /* Unaligned access operation */ -#define CR_XP (1 << 23) /* Extended page tables */ -#define CR_VE (1 << 24) /* Vectored interrupts */ - -#define CPUID_ID 0 -#define CPUID_CACHETYPE 1 -#define CPUID_TCM 2 -#define CPUID_TLBTYPE 3 - -/* - * This is used to ensure the compiler did actually allocate the register we - * asked it for some inline assembly sequences. Apparently we can't trust - * the compiler from one version to another so a bit of paranoia won't hurt. - * This string is meant to be concatenated with the inline asm string and - * will cause compilation to stop on mismatch. - * (for details, see gcc PR 15089) - */ -#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t" - -#ifndef __ASSEMBLY__ - -#include -#include -#include - -#ifdef CONFIG_CPU_CP15 -#define read_cpuid(reg) \ - ({ \ - unsigned int __val; \ - asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \ - : "=r" (__val) \ - : \ - : "cc"); \ - __val; \ - }) -#else -extern unsigned int processor_id; -#define read_cpuid(reg) (processor_id) -#endif - -/* - * The CPU ID never changes at run time, so we might as well tell the - * compiler that it's constant. Use this function to read the CPU ID - * rather than directly reading processor_id or read_cpuid() directly. - */ -static inline unsigned int read_cpuid_id(void) __attribute_const__; - -static inline unsigned int read_cpuid_id(void) -{ - return read_cpuid(CPUID_ID); -} - -#define __exception __attribute__((section(".exception.text"))) - -struct thread_info; -struct task_struct; - -/* information about the system we're running on */ -extern unsigned int system_rev; -extern unsigned int system_serial_low; -extern unsigned int system_serial_high; -extern unsigned int mem_fclk_21285; - -struct pt_regs; - -void die(const char *msg, struct pt_regs *regs, int err) - __attribute__((noreturn)); - -struct siginfo; -void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, - unsigned long err, unsigned long trap); - -void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, - struct pt_regs *), - int sig, const char *name); - -#define xchg(ptr,x) \ - ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -extern asmlinkage void __backtrace(void); -extern asmlinkage void c_backtrace(unsigned long fp, int pmode); - -struct mm_struct; -extern void show_pte(struct mm_struct *mm, unsigned long addr); -extern void __show_regs(struct pt_regs *); - -extern int cpu_architecture(void); -extern void cpu_init(void); - -void arm_machine_restart(char mode); -extern void (*arm_pm_restart)(char str); - -/* - * Intel's XScale3 core supports some v6 features (supersections, L2) - * but advertises itself as v5 as it does not support the v6 ISA. For - * this reason, we need a way to explicitly test for this type of CPU. - */ -#ifndef CONFIG_CPU_XSC3 -#define cpu_is_xsc3() 0 -#else -static inline int cpu_is_xsc3(void) -{ - extern unsigned int processor_id; - - if ((processor_id & 0xffffe000) == 0x69056000) - return 1; - - return 0; -} -#endif - -#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3) -#define cpu_is_xscale() 0 -#else -#define cpu_is_xscale() 1 -#endif - -#define UDBG_UNDEFINED (1 << 0) -#define UDBG_SYSCALL (1 << 1) -#define UDBG_BADABORT (1 << 2) -#define UDBG_SEGV (1 << 3) -#define UDBG_BUS (1 << 4) - -extern unsigned int user_debug; - -#if __LINUX_ARM_ARCH__ >= 4 -#define vectors_high() (cr_alignment & CR_V) -#else -#define vectors_high() (0) -#endif - -#if __LINUX_ARM_ARCH__ >= 7 -#define isb() __asm__ __volatile__ ("isb" : : : "memory") -#define dsb() __asm__ __volatile__ ("dsb" : : : "memory") -#define dmb() __asm__ __volatile__ ("dmb" : : : "memory") -#elif defined(CONFIG_CPU_XSC3) || __LINUX_ARM_ARCH__ == 6 -#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ - : : "r" (0) : "memory") -#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ - : : "r" (0) : "memory") -#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \ - : : "r" (0) : "memory") -#else -#define isb() __asm__ __volatile__ ("" : : : "memory") -#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \ - : : "r" (0) : "memory") -#define dmb() __asm__ __volatile__ ("" : : : "memory") -#endif - -#ifndef CONFIG_SMP -#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#else -#define mb() dmb() -#define rmb() dmb() -#define wmb() dmb() -#define smp_mb() dmb() -#define smp_rmb() dmb() -#define smp_wmb() dmb() -#endif -#define read_barrier_depends() do { } while(0) -#define smp_read_barrier_depends() do { } while(0) - -#define set_mb(var, value) do { var = value; smp_mb(); } while (0) -#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); - -extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ -extern unsigned long cr_alignment; /* defined in entry-armv.S */ - -static inline unsigned int get_cr(void) -{ - unsigned int val; - asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc"); - return val; -} - -static inline void set_cr(unsigned int val) -{ - asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" - : : "r" (val) : "cc"); - isb(); -} - -#ifndef CONFIG_SMP -extern void adjust_cr(unsigned long mask, unsigned long set); -#endif - -#define CPACC_FULL(n) (3 << (n * 2)) -#define CPACC_SVC(n) (1 << (n * 2)) -#define CPACC_DISABLE(n) (0 << (n * 2)) - -static inline unsigned int get_copro_access(void) -{ - unsigned int val; - asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access" - : "=r" (val) : : "cc"); - return val; -} - -static inline void set_copro_access(unsigned int val) -{ - asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access" - : : "r" (val) : "cc"); - isb(); -} - -/* - * switch_mm() may do a full cache flush over the context switch, - * so enable interrupts over the context switch to avoid high - * latency. - */ -#define __ARCH_WANT_INTERRUPTS_ON_CTXSW - -/* - * switch_to(prev, next) should switch from task `prev' to `next' - * `prev' will never be the same as `next'. schedule() itself - * contains the memory barrier to tell GCC not to cache `current'. - */ -extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *); - -#define switch_to(prev,next,last) \ -do { \ - last = __switch_to(prev,task_thread_info(prev), task_thread_info(next)); \ -} while (0) - -#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) -/* - * On the StrongARM, "swp" is terminally broken since it bypasses the - * cache totally. This means that the cache becomes inconsistent, and, - * since we use normal loads/stores as well, this is really bad. - * Typically, this causes oopsen in filp_close, but could have other, - * more disasterous effects. There are two work-arounds: - * 1. Disable interrupts and emulate the atomic swap - * 2. Clean the cache, perform atomic swap, flush the cache - * - * We choose (1) since its the "easiest" to achieve here and is not - * dependent on the processor type. - * - * NOTE that this solution won't work on an SMP system, so explcitly - * forbid it here. - */ -#define swp_is_buggy -#endif - -static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) -{ - extern void __bad_xchg(volatile void *, int); - unsigned long ret; -#ifdef swp_is_buggy - unsigned long flags; -#endif -#if __LINUX_ARM_ARCH__ >= 6 - unsigned int tmp; -#endif - - switch (size) { -#if __LINUX_ARM_ARCH__ >= 6 - case 1: - asm volatile("@ __xchg1\n" - "1: ldrexb %0, [%3]\n" - " strexb %1, %2, [%3]\n" - " teq %1, #0\n" - " bne 1b" - : "=&r" (ret), "=&r" (tmp) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; - case 4: - asm volatile("@ __xchg4\n" - "1: ldrex %0, [%3]\n" - " strex %1, %2, [%3]\n" - " teq %1, #0\n" - " bne 1b" - : "=&r" (ret), "=&r" (tmp) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; -#elif defined(swp_is_buggy) -#ifdef CONFIG_SMP -#error SMP is not supported on this platform -#endif - case 1: - raw_local_irq_save(flags); - ret = *(volatile unsigned char *)ptr; - *(volatile unsigned char *)ptr = x; - raw_local_irq_restore(flags); - break; - - case 4: - raw_local_irq_save(flags); - ret = *(volatile unsigned long *)ptr; - *(volatile unsigned long *)ptr = x; - raw_local_irq_restore(flags); - break; -#else - case 1: - asm volatile("@ __xchg1\n" - " swpb %0, %1, [%2]" - : "=&r" (ret) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; - case 4: - asm volatile("@ __xchg4\n" - " swp %0, %1, [%2]" - : "=&r" (ret) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; -#endif - default: - __bad_xchg(ptr, size), ret = 0; - break; - } - - return ret; -} - -extern void disable_hlt(void); -extern void enable_hlt(void); - -#include - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#ifndef CONFIG_SMP -#include -#endif - -#endif /* __ASSEMBLY__ */ - -#define arch_align_stack(x) (x) - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-arm/termbits.h b/include/asm-arm/termbits.h deleted file mode 100644 index f784d11f40b5..000000000000 --- a/include/asm-arm/termbits.h +++ /dev/null @@ -1,197 +0,0 @@ -#ifndef __ASM_ARM_TERMBITS_H -#define __ASM_ARM_TERMBITS_H - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ASM_ARM_TERMBITS_H */ diff --git a/include/asm-arm/termios.h b/include/asm-arm/termios.h deleted file mode 100644 index 293e3f1bc3f2..000000000000 --- a/include/asm-arm/termios.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef __ASM_ARM_TERMIOS_H -#define __ASM_ARM_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#ifdef __KERNEL__ -/* intr=^C quit=^| erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* __ASM_ARM_TERMIOS_H */ diff --git a/include/asm-arm/therm.h b/include/asm-arm/therm.h deleted file mode 100644 index e51c923ecdf3..000000000000 --- a/include/asm-arm/therm.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * linux/include/asm-arm/therm.h: Definitions for Dallas Semiconductor - * DS1620 thermometer driver (as used in the Rebel.com NetWinder) - */ -#ifndef __ASM_THERM_H -#define __ASM_THERM_H - -/* ioctl numbers for /dev/therm */ -#define CMD_SET_THERMOSTATE 0x53 -#define CMD_GET_THERMOSTATE 0x54 -#define CMD_GET_STATUS 0x56 -#define CMD_GET_TEMPERATURE 0x57 -#define CMD_SET_THERMOSTATE2 0x58 -#define CMD_GET_THERMOSTATE2 0x59 -#define CMD_GET_TEMPERATURE2 0x5a -#define CMD_GET_FAN 0x5b -#define CMD_SET_FAN 0x5c - -#define FAN_OFF 0 -#define FAN_ON 1 -#define FAN_ALWAYS_ON 2 - -struct therm { - int hi; - int lo; -}; - -#endif diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h deleted file mode 100644 index d4be2d646160..000000000000 --- a/include/asm-arm/thread_info.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * linux/include/asm-arm/thread_info.h - * - * Copyright (C) 2002 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_THREAD_INFO_H -#define __ASM_ARM_THREAD_INFO_H - -#ifdef __KERNEL__ - -#include -#include - -#define THREAD_SIZE_ORDER 1 -#define THREAD_SIZE 8192 -#define THREAD_START_SP (THREAD_SIZE - 8) - -#ifndef __ASSEMBLY__ - -struct task_struct; -struct exec_domain; - -#include -#include - -typedef unsigned long mm_segment_t; - -struct cpu_context_save { - __u32 r4; - __u32 r5; - __u32 r6; - __u32 r7; - __u32 r8; - __u32 r9; - __u32 sl; - __u32 fp; - __u32 sp; - __u32 pc; - __u32 extra[2]; /* Xscale 'acc' register, etc */ -}; - -/* - * low level task data that entry.S needs immediate access to. - * __switch_to() assumes cpu_context follows immediately after cpu_domain. - */ -struct thread_info { - unsigned long flags; /* low level flags */ - int preempt_count; /* 0 => preemptable, <0 => bug */ - mm_segment_t addr_limit; /* address limit */ - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - __u32 cpu; /* cpu */ - __u32 cpu_domain; /* cpu domain */ - struct cpu_context_save cpu_context; /* cpu context */ - __u32 syscall; /* syscall number */ - __u8 used_cp[16]; /* thread used copro */ - unsigned long tp_value; - struct crunch_state crunchstate; - union fp_state fpstate __attribute__((aligned(8))); - union vfp_state vfpstate; -#ifdef CONFIG_ARM_THUMBEE - unsigned long thumbee_state; /* ThumbEE Handler Base register */ -#endif - struct restart_block restart_block; -}; - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .cpu_domain = domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_IO, DOMAIN_CLIENT), \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -/* - * how to get the thread information struct from C - */ -static inline struct thread_info *current_thread_info(void) __attribute_const__; - -static inline struct thread_info *current_thread_info(void) -{ - register unsigned long sp asm ("sp"); - return (struct thread_info *)(sp & ~(THREAD_SIZE - 1)); -} - -#define thread_saved_pc(tsk) \ - ((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc))) -#define thread_saved_fp(tsk) \ - ((unsigned long)(task_thread_info(tsk)->cpu_context.fp)) - -extern void crunch_task_disable(struct thread_info *); -extern void crunch_task_copy(struct thread_info *, void *); -extern void crunch_task_restore(struct thread_info *, void *); -extern void crunch_task_release(struct thread_info *); - -extern void iwmmxt_task_disable(struct thread_info *); -extern void iwmmxt_task_copy(struct thread_info *, void *); -extern void iwmmxt_task_restore(struct thread_info *, void *); -extern void iwmmxt_task_release(struct thread_info *); -extern void iwmmxt_task_switch(struct thread_info *); - -#endif - -/* - * We use bit 30 of the preempt_count to indicate that kernel - * preemption is occurring. See include/asm-arm/hardirq.h. - */ -#define PREEMPT_ACTIVE 0x40000000 - -/* - * thread information flags: - * TIF_SYSCALL_TRACE - syscall trace active - * TIF_SIGPENDING - signal pending - * TIF_NEED_RESCHED - rescheduling necessary - * TIF_USEDFPU - FPU was used by this task this quantum (SMP) - * TIF_POLLING_NRFLAG - true if poll_idle() is polling TIF_NEED_RESCHED - */ -#define TIF_SIGPENDING 0 -#define TIF_NEED_RESCHED 1 -#define TIF_SYSCALL_TRACE 8 -#define TIF_POLLING_NRFLAG 16 -#define TIF_USING_IWMMXT 17 -#define TIF_MEMDIE 18 -#define TIF_FREEZE 19 - -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) -#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) -#define _TIF_FREEZE (1 << TIF_FREEZE) - -/* - * Change these and you break ASM code in entry-common.S - */ -#define _TIF_WORK_MASK 0x000000ff - -#endif /* __KERNEL__ */ -#endif /* __ASM_ARM_THREAD_INFO_H */ diff --git a/include/asm-arm/thread_notify.h b/include/asm-arm/thread_notify.h deleted file mode 100644 index 8866e5216840..000000000000 --- a/include/asm-arm/thread_notify.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/include/asm-arm/thread_notify.h - * - * Copyright (C) 2006 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_THREAD_NOTIFY_H -#define ASMARM_THREAD_NOTIFY_H - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ - -#include -#include - -static inline int thread_register_notifier(struct notifier_block *n) -{ - extern struct atomic_notifier_head thread_notify_head; - return atomic_notifier_chain_register(&thread_notify_head, n); -} - -static inline void thread_unregister_notifier(struct notifier_block *n) -{ - extern struct atomic_notifier_head thread_notify_head; - atomic_notifier_chain_unregister(&thread_notify_head, n); -} - -static inline void thread_notify(unsigned long rc, struct thread_info *thread) -{ - extern struct atomic_notifier_head thread_notify_head; - atomic_notifier_call_chain(&thread_notify_head, rc, thread); -} - -#endif - -/* - * These are the reason codes for the thread notifier. - */ -#define THREAD_NOTIFY_FLUSH 0 -#define THREAD_NOTIFY_RELEASE 1 -#define THREAD_NOTIFY_SWITCH 2 - -#endif -#endif diff --git a/include/asm-arm/timex.h b/include/asm-arm/timex.h deleted file mode 100644 index 7b8d4cb24be0..000000000000 --- a/include/asm-arm/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/include/asm-arm/timex.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Architecture Specific TIME specifications - */ -#ifndef _ASMARM_TIMEX_H -#define _ASMARM_TIMEX_H - -#include - -typedef unsigned long cycles_t; - -static inline cycles_t get_cycles (void) -{ - return 0; -} - -#endif diff --git a/include/asm-arm/tlb.h b/include/asm-arm/tlb.h deleted file mode 100644 index 36bd402a21cb..000000000000 --- a/include/asm-arm/tlb.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * linux/include/asm-arm/tlb.h - * - * Copyright (C) 2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Experimentation shows that on a StrongARM, it appears to be faster - * to use the "invalidate whole tlb" rather than "invalidate single - * tlb" for this. - * - * This appears true for both the process fork+exit case, as well as - * the munmap-large-area case. - */ -#ifndef __ASMARM_TLB_H -#define __ASMARM_TLB_H - -#include -#include - -#ifndef CONFIG_MMU - -#include -#include - -#else /* !CONFIG_MMU */ - -#include - -/* - * TLB handling. This allows us to remove pages from the page - * tables, and efficiently handle the TLB issues. - */ -struct mmu_gather { - struct mm_struct *mm; - unsigned int fullmm; -}; - -DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); - -static inline struct mmu_gather * -tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) -{ - struct mmu_gather *tlb = &get_cpu_var(mmu_gathers); - - tlb->mm = mm; - tlb->fullmm = full_mm_flush; - - return tlb; -} - -static inline void -tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) -{ - if (tlb->fullmm) - flush_tlb_mm(tlb->mm); - - /* keep the page table cache within bounds */ - check_pgt_cache(); - - put_cpu_var(mmu_gathers); -} - -#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0) - -/* - * In the case of tlb vma handling, we can optimise these away in the - * case where we're doing a full MM flush. When we're doing a munmap, - * the vmas are adjusted to only cover the region to be torn down. - */ -static inline void -tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) -{ - if (!tlb->fullmm) - flush_cache_range(vma, vma->vm_start, vma->vm_end); -} - -static inline void -tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) -{ - if (!tlb->fullmm) - flush_tlb_range(vma, vma->vm_start, vma->vm_end); -} - -#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) -#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep) -#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp) - -#define tlb_migrate_finish(mm) do { } while (0) - -#endif /* CONFIG_MMU */ -#endif diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h deleted file mode 100644 index 909656c747ef..000000000000 --- a/include/asm-arm/tlbflush.h +++ /dev/null @@ -1,500 +0,0 @@ -/* - * linux/include/asm-arm/tlbflush.h - * - * Copyright (C) 1999-2003 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_TLBFLUSH_H -#define _ASMARM_TLBFLUSH_H - - -#ifndef CONFIG_MMU - -#define tlb_flush(tlb) ((void) tlb) - -#else /* CONFIG_MMU */ - -#include - -#define TLB_V3_PAGE (1 << 0) -#define TLB_V4_U_PAGE (1 << 1) -#define TLB_V4_D_PAGE (1 << 2) -#define TLB_V4_I_PAGE (1 << 3) -#define TLB_V6_U_PAGE (1 << 4) -#define TLB_V6_D_PAGE (1 << 5) -#define TLB_V6_I_PAGE (1 << 6) - -#define TLB_V3_FULL (1 << 8) -#define TLB_V4_U_FULL (1 << 9) -#define TLB_V4_D_FULL (1 << 10) -#define TLB_V4_I_FULL (1 << 11) -#define TLB_V6_U_FULL (1 << 12) -#define TLB_V6_D_FULL (1 << 13) -#define TLB_V6_I_FULL (1 << 14) - -#define TLB_V6_U_ASID (1 << 16) -#define TLB_V6_D_ASID (1 << 17) -#define TLB_V6_I_ASID (1 << 18) - -#define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */ -#define TLB_DCLEAN (1 << 30) -#define TLB_WB (1 << 31) - -/* - * MMU TLB Model - * ============= - * - * We have the following to choose from: - * v3 - ARMv3 - * v4 - ARMv4 without write buffer - * v4wb - ARMv4 with write buffer without I TLB flush entry instruction - * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction - * fr - Feroceon (v4wbi with non-outer-cacheable page table walks) - * v6wbi - ARMv6 with write buffer with I TLB flush entry instruction - */ -#undef _TLB -#undef MULTI_TLB - -#define v3_tlb_flags (TLB_V3_FULL | TLB_V3_PAGE) - -#ifdef CONFIG_CPU_TLB_V3 -# define v3_possible_flags v3_tlb_flags -# define v3_always_flags v3_tlb_flags -# ifdef _TLB -# define MULTI_TLB 1 -# else -# define _TLB v3 -# endif -#else -# define v3_possible_flags 0 -# define v3_always_flags (-1UL) -#endif - -#define v4_tlb_flags (TLB_V4_U_FULL | TLB_V4_U_PAGE) - -#ifdef CONFIG_CPU_TLB_V4WT -# define v4_possible_flags v4_tlb_flags -# define v4_always_flags v4_tlb_flags -# ifdef _TLB -# define MULTI_TLB 1 -# else -# define _TLB v4 -# endif -#else -# define v4_possible_flags 0 -# define v4_always_flags (-1UL) -#endif - -#define v4wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \ - TLB_V4_I_FULL | TLB_V4_D_FULL | \ - TLB_V4_I_PAGE | TLB_V4_D_PAGE) - -#ifdef CONFIG_CPU_TLB_V4WBI -# define v4wbi_possible_flags v4wbi_tlb_flags -# define v4wbi_always_flags v4wbi_tlb_flags -# ifdef _TLB -# define MULTI_TLB 1 -# else -# define _TLB v4wbi -# endif -#else -# define v4wbi_possible_flags 0 -# define v4wbi_always_flags (-1UL) -#endif - -#define fr_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_L2CLEAN_FR | \ - TLB_V4_I_FULL | TLB_V4_D_FULL | \ - TLB_V4_I_PAGE | TLB_V4_D_PAGE) - -#ifdef CONFIG_CPU_TLB_FEROCEON -# define fr_possible_flags fr_tlb_flags -# define fr_always_flags fr_tlb_flags -# ifdef _TLB -# define MULTI_TLB 1 -# else -# define _TLB v4wbi -# endif -#else -# define fr_possible_flags 0 -# define fr_always_flags (-1UL) -#endif - -#define v4wb_tlb_flags (TLB_WB | TLB_DCLEAN | \ - TLB_V4_I_FULL | TLB_V4_D_FULL | \ - TLB_V4_D_PAGE) - -#ifdef CONFIG_CPU_TLB_V4WB -# define v4wb_possible_flags v4wb_tlb_flags -# define v4wb_always_flags v4wb_tlb_flags -# ifdef _TLB -# define MULTI_TLB 1 -# else -# define _TLB v4wb -# endif -#else -# define v4wb_possible_flags 0 -# define v4wb_always_flags (-1UL) -#endif - -#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \ - TLB_V6_I_FULL | TLB_V6_D_FULL | \ - TLB_V6_I_PAGE | TLB_V6_D_PAGE | \ - TLB_V6_I_ASID | TLB_V6_D_ASID) - -#ifdef CONFIG_CPU_TLB_V6 -# define v6wbi_possible_flags v6wbi_tlb_flags -# define v6wbi_always_flags v6wbi_tlb_flags -# ifdef _TLB -# define MULTI_TLB 1 -# else -# define _TLB v6wbi -# endif -#else -# define v6wbi_possible_flags 0 -# define v6wbi_always_flags (-1UL) -#endif - -#ifdef CONFIG_CPU_TLB_V7 -# define v7wbi_possible_flags v6wbi_tlb_flags -# define v7wbi_always_flags v6wbi_tlb_flags -# ifdef _TLB -# define MULTI_TLB 1 -# else -# define _TLB v7wbi -# endif -#else -# define v7wbi_possible_flags 0 -# define v7wbi_always_flags (-1UL) -#endif - -#ifndef _TLB -#error Unknown TLB model -#endif - -#ifndef __ASSEMBLY__ - -#include - -struct cpu_tlb_fns { - void (*flush_user_range)(unsigned long, unsigned long, struct vm_area_struct *); - void (*flush_kern_range)(unsigned long, unsigned long); - unsigned long tlb_flags; -}; - -/* - * Select the calling method - */ -#ifdef MULTI_TLB - -#define __cpu_flush_user_tlb_range cpu_tlb.flush_user_range -#define __cpu_flush_kern_tlb_range cpu_tlb.flush_kern_range - -#else - -#define __cpu_flush_user_tlb_range __glue(_TLB,_flush_user_tlb_range) -#define __cpu_flush_kern_tlb_range __glue(_TLB,_flush_kern_tlb_range) - -extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *); -extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long); - -#endif - -extern struct cpu_tlb_fns cpu_tlb; - -#define __cpu_tlb_flags cpu_tlb.tlb_flags - -/* - * TLB Management - * ============== - * - * The arch/arm/mm/tlb-*.S files implement these methods. - * - * The TLB specific code is expected to perform whatever tests it - * needs to determine if it should invalidate the TLB for each - * call. Start addresses are inclusive and end addresses are - * exclusive; it is safe to round these addresses down. - * - * flush_tlb_all() - * - * Invalidate the entire TLB. - * - * flush_tlb_mm(mm) - * - * Invalidate all TLB entries in a particular address - * space. - * - mm - mm_struct describing address space - * - * flush_tlb_range(mm,start,end) - * - * Invalidate a range of TLB entries in the specified - * address space. - * - mm - mm_struct describing address space - * - start - start address (may not be aligned) - * - end - end address (exclusive, may not be aligned) - * - * flush_tlb_page(vaddr,vma) - * - * Invalidate the specified page in the specified address range. - * - vaddr - virtual address (may not be aligned) - * - vma - vma_struct describing address range - * - * flush_kern_tlb_page(kaddr) - * - * Invalidate the TLB entry for the specified page. The address - * will be in the kernels virtual memory space. Current uses - * only require the D-TLB to be invalidated. - * - kaddr - Kernel virtual memory address - */ - -/* - * We optimise the code below by: - * - building a set of TLB flags that might be set in __cpu_tlb_flags - * - building a set of TLB flags that will always be set in __cpu_tlb_flags - * - if we're going to need __cpu_tlb_flags, access it once and only once - * - * This allows us to build optimal assembly for the single-CPU type case, - * and as close to optimal given the compiler constrants for multi-CPU - * case. We could do better for the multi-CPU case if the compiler - * implemented the "%?" method, but this has been discontinued due to too - * many people getting it wrong. - */ -#define possible_tlb_flags (v3_possible_flags | \ - v4_possible_flags | \ - v4wbi_possible_flags | \ - fr_possible_flags | \ - v4wb_possible_flags | \ - v6wbi_possible_flags) - -#define always_tlb_flags (v3_always_flags & \ - v4_always_flags & \ - v4wbi_always_flags & \ - fr_always_flags & \ - v4wb_always_flags & \ - v6wbi_always_flags) - -#define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f))) - -static inline void local_flush_tlb_all(void) -{ - const int zero = 0; - const unsigned int __tlb_flag = __cpu_tlb_flags; - - if (tlb_flag(TLB_WB)) - dsb(); - - if (tlb_flag(TLB_V3_FULL)) - asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_U_FULL | TLB_V6_U_FULL)) - asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_D_FULL | TLB_V6_D_FULL)) - asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL)) - asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); - - if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | - TLB_V6_I_PAGE | TLB_V6_D_PAGE | - TLB_V6_I_ASID | TLB_V6_D_ASID)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - isb(); - } -} - -static inline void local_flush_tlb_mm(struct mm_struct *mm) -{ - const int zero = 0; - const int asid = ASID(mm); - const unsigned int __tlb_flag = __cpu_tlb_flags; - - if (tlb_flag(TLB_WB)) - dsb(); - - if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) { - if (tlb_flag(TLB_V3_FULL)) - asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_U_FULL)) - asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_D_FULL)) - asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_V4_I_FULL)) - asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); - } - - if (tlb_flag(TLB_V6_U_ASID)) - asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc"); - if (tlb_flag(TLB_V6_D_ASID)) - asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc"); - if (tlb_flag(TLB_V6_I_ASID)) - asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc"); - - if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | - TLB_V6_I_PAGE | TLB_V6_D_PAGE | - TLB_V6_I_ASID | TLB_V6_D_ASID)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - } -} - -static inline void -local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) -{ - const int zero = 0; - const unsigned int __tlb_flag = __cpu_tlb_flags; - - uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm); - - if (tlb_flag(TLB_WB)) - dsb(); - - if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { - if (tlb_flag(TLB_V3_PAGE)) - asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V4_U_PAGE)) - asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V4_D_PAGE)) - asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V4_I_PAGE)) - asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); - if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL)) - asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); - } - - if (tlb_flag(TLB_V6_U_PAGE)) - asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V6_D_PAGE)) - asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc"); - if (tlb_flag(TLB_V6_I_PAGE)) - asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc"); - - if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | - TLB_V6_I_PAGE | TLB_V6_D_PAGE | - TLB_V6_I_ASID | TLB_V6_D_ASID)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - } -} - -static inline void local_flush_tlb_kernel_page(unsigned long kaddr) -{ - const int zero = 0; - const unsigned int __tlb_flag = __cpu_tlb_flags; - - kaddr &= PAGE_MASK; - - if (tlb_flag(TLB_WB)) - dsb(); - - if (tlb_flag(TLB_V3_PAGE)) - asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V4_U_PAGE)) - asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V4_D_PAGE)) - asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V4_I_PAGE)) - asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); - if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL)) - asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); - - if (tlb_flag(TLB_V6_U_PAGE)) - asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V6_D_PAGE)) - asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_V6_I_PAGE)) - asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); - - if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | - TLB_V6_I_PAGE | TLB_V6_D_PAGE | - TLB_V6_I_ASID | TLB_V6_D_ASID)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - isb(); - } -} - -/* - * flush_pmd_entry - * - * Flush a PMD entry (word aligned, or double-word aligned) to - * RAM if the TLB for the CPU we are running on requires this. - * This is typically used when we are creating PMD entries. - * - * clean_pmd_entry - * - * Clean (but don't drain the write buffer) if the CPU requires - * these operations. This is typically used when we are removing - * PMD entries. - */ -static inline void flush_pmd_entry(pmd_t *pmd) -{ - const unsigned int __tlb_flag = __cpu_tlb_flags; - - if (tlb_flag(TLB_DCLEAN)) - asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" - : : "r" (pmd) : "cc"); - - if (tlb_flag(TLB_L2CLEAN_FR)) - asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd" - : : "r" (pmd) : "cc"); - - if (tlb_flag(TLB_WB)) - dsb(); -} - -static inline void clean_pmd_entry(pmd_t *pmd) -{ - const unsigned int __tlb_flag = __cpu_tlb_flags; - - if (tlb_flag(TLB_DCLEAN)) - asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" - : : "r" (pmd) : "cc"); - - if (tlb_flag(TLB_L2CLEAN_FR)) - asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd" - : : "r" (pmd) : "cc"); -} - -#undef tlb_flag -#undef always_tlb_flags -#undef possible_tlb_flags - -/* - * Convert calls to our calling convention. - */ -#define local_flush_tlb_range(vma,start,end) __cpu_flush_user_tlb_range(start,end,vma) -#define local_flush_tlb_kernel_range(s,e) __cpu_flush_kern_tlb_range(s,e) - -#ifndef CONFIG_SMP -#define flush_tlb_all local_flush_tlb_all -#define flush_tlb_mm local_flush_tlb_mm -#define flush_tlb_page local_flush_tlb_page -#define flush_tlb_kernel_page local_flush_tlb_kernel_page -#define flush_tlb_range local_flush_tlb_range -#define flush_tlb_kernel_range local_flush_tlb_kernel_range -#else -extern void flush_tlb_all(void); -extern void flush_tlb_mm(struct mm_struct *mm); -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr); -extern void flush_tlb_kernel_page(unsigned long kaddr); -extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); -extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); -#endif - -/* - * if PG_dcache_dirty is set for the page, we need to ensure that any - * cache entries for the kernels virtual memory range are written - * back to the page. - */ -extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte); - -#endif - -#endif /* CONFIG_MMU */ - -#endif diff --git a/include/asm-arm/topology.h b/include/asm-arm/topology.h deleted file mode 100644 index accbd7cad9b5..000000000000 --- a/include/asm-arm/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_ARM_TOPOLOGY_H -#define _ASM_ARM_TOPOLOGY_H - -#include - -#endif /* _ASM_ARM_TOPOLOGY_H */ diff --git a/include/asm-arm/traps.h b/include/asm-arm/traps.h deleted file mode 100644 index aa399aec568e..000000000000 --- a/include/asm-arm/traps.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _ASMARM_TRAP_H -#define _ASMARM_TRAP_H - -#include - -struct undef_hook { - struct list_head node; - u32 instr_mask; - u32 instr_val; - u32 cpsr_mask; - u32 cpsr_val; - int (*fn)(struct pt_regs *regs, unsigned int instr); -}; - -void register_undef_hook(struct undef_hook *hook); -void unregister_undef_hook(struct undef_hook *hook); - -static inline int in_exception_text(unsigned long ptr) -{ - extern char __exception_text_start[]; - extern char __exception_text_end[]; - - return ptr >= (unsigned long)&__exception_text_start && - ptr < (unsigned long)&__exception_text_end; -} - -extern void __init early_trap_init(void); - -#endif diff --git a/include/asm-arm/types.h b/include/asm-arm/types.h deleted file mode 100644 index 345df01534a4..000000000000 --- a/include/asm-arm/types.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef __ASM_ARM_TYPES_H -#define __ASM_ARM_TYPES_H - -#include - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; -typedef u32 dma64_addr_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif - diff --git a/include/asm-arm/uaccess.h b/include/asm-arm/uaccess.h deleted file mode 100644 index 4c1a3fa9f259..000000000000 --- a/include/asm-arm/uaccess.h +++ /dev/null @@ -1,444 +0,0 @@ -/* - * linux/include/asm-arm/uaccess.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_UACCESS_H -#define _ASMARM_UACCESS_H - -/* - * User space memory access functions - */ -#include -#include -#include -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -extern int fixup_exception(struct pt_regs *regs); - -/* - * These two are intentionally not defined anywhere - if the kernel - * code generates any references to them, that's a bug. - */ -extern int __get_user_bad(void); -extern int __put_user_bad(void); - -/* - * Note that this is actually 0x1,0000,0000 - */ -#define KERNEL_DS 0x00000000 -#define get_ds() (KERNEL_DS) - -#ifdef CONFIG_MMU - -#define USER_DS TASK_SIZE -#define get_fs() (current_thread_info()->addr_limit) - -static inline void set_fs(mm_segment_t fs) -{ - current_thread_info()->addr_limit = fs; - modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER); -} - -#define segment_eq(a,b) ((a) == (b)) - -#define __addr_ok(addr) ({ \ - unsigned long flag; \ - __asm__("cmp %2, %0; movlo %0, #0" \ - : "=&r" (flag) \ - : "0" (current_thread_info()->addr_limit), "r" (addr) \ - : "cc"); \ - (flag == 0); }) - -/* We use 33-bit arithmetic here... */ -#define __range_ok(addr,size) ({ \ - unsigned long flag, roksum; \ - __chk_user_ptr(addr); \ - __asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \ - : "=&r" (flag), "=&r" (roksum) \ - : "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \ - : "cc"); \ - flag; }) - -/* - * Single-value transfer routines. They automatically use the right - * size if we just have the right pointer type. Note that the functions - * which read from user space (*get_*) need to take care not to leak - * kernel data even if the calling code is buggy and fails to check - * the return value. This means zeroing out the destination variable - * or buffer on error. Normally this is done out of line by the - * fixup code, but there are a few places where it intrudes on the - * main code path. When we only write to user space, there is no - * problem. - */ -extern int __get_user_1(void *); -extern int __get_user_2(void *); -extern int __get_user_4(void *); - -#define __get_user_x(__r2,__p,__e,__s,__i...) \ - __asm__ __volatile__ ( \ - __asmeq("%0", "r0") __asmeq("%1", "r2") \ - "bl __get_user_" #__s \ - : "=&r" (__e), "=r" (__r2) \ - : "0" (__p) \ - : __i, "cc") - -#define get_user(x,p) \ - ({ \ - register const typeof(*(p)) __user *__p asm("r0") = (p);\ - register unsigned long __r2 asm("r2"); \ - register int __e asm("r0"); \ - switch (sizeof(*(__p))) { \ - case 1: \ - __get_user_x(__r2, __p, __e, 1, "lr"); \ - break; \ - case 2: \ - __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \ - break; \ - case 4: \ - __get_user_x(__r2, __p, __e, 4, "lr"); \ - break; \ - default: __e = __get_user_bad(); break; \ - } \ - x = (typeof(*(p))) __r2; \ - __e; \ - }) - -extern int __put_user_1(void *, unsigned int); -extern int __put_user_2(void *, unsigned int); -extern int __put_user_4(void *, unsigned int); -extern int __put_user_8(void *, unsigned long long); - -#define __put_user_x(__r2,__p,__e,__s) \ - __asm__ __volatile__ ( \ - __asmeq("%0", "r0") __asmeq("%2", "r2") \ - "bl __put_user_" #__s \ - : "=&r" (__e) \ - : "0" (__p), "r" (__r2) \ - : "ip", "lr", "cc") - -#define put_user(x,p) \ - ({ \ - register const typeof(*(p)) __r2 asm("r2") = (x); \ - register const typeof(*(p)) __user *__p asm("r0") = (p);\ - register int __e asm("r0"); \ - switch (sizeof(*(__p))) { \ - case 1: \ - __put_user_x(__r2, __p, __e, 1); \ - break; \ - case 2: \ - __put_user_x(__r2, __p, __e, 2); \ - break; \ - case 4: \ - __put_user_x(__r2, __p, __e, 4); \ - break; \ - case 8: \ - __put_user_x(__r2, __p, __e, 8); \ - break; \ - default: __e = __put_user_bad(); break; \ - } \ - __e; \ - }) - -#else /* CONFIG_MMU */ - -/* - * uClinux has only one addr space, so has simplified address limits. - */ -#define USER_DS KERNEL_DS - -#define segment_eq(a,b) (1) -#define __addr_ok(addr) (1) -#define __range_ok(addr,size) (0) -#define get_fs() (KERNEL_DS) - -static inline void set_fs(mm_segment_t fs) -{ -} - -#define get_user(x,p) __get_user(x,p) -#define put_user(x,p) __put_user(x,p) - -#endif /* CONFIG_MMU */ - -#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) - -/* - * The "__xxx" versions of the user access functions do not verify the - * address space - it must have been done previously with a separate - * "access_ok()" call. - * - * The "xxx_error" versions set the third argument to EFAULT if an - * error occurs, and leave it unchanged on success. Note that these - * versions are void (ie, don't return a value as such). - */ -#define __get_user(x,ptr) \ -({ \ - long __gu_err = 0; \ - __get_user_err((x),(ptr),__gu_err); \ - __gu_err; \ -}) - -#define __get_user_error(x,ptr,err) \ -({ \ - __get_user_err((x),(ptr),err); \ - (void) 0; \ -}) - -#define __get_user_err(x,ptr,err) \ -do { \ - unsigned long __gu_addr = (unsigned long)(ptr); \ - unsigned long __gu_val; \ - __chk_user_ptr(ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \ - case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \ - case 4: __get_user_asm_word(__gu_val,__gu_addr,err); break; \ - default: (__gu_val) = __get_user_bad(); \ - } \ - (x) = (__typeof__(*(ptr)))__gu_val; \ -} while (0) - -#define __get_user_asm_byte(x,addr,err) \ - __asm__ __volatile__( \ - "1: ldrbt %1,[%2],#0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .align 2\n" \ - "3: mov %0, %3\n" \ - " mov %1, #0\n" \ - " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "+r" (err), "=&r" (x) \ - : "r" (addr), "i" (-EFAULT) \ - : "cc") - -#ifndef __ARMEB__ -#define __get_user_asm_half(x,__gu_addr,err) \ -({ \ - unsigned long __b1, __b2; \ - __get_user_asm_byte(__b1, __gu_addr, err); \ - __get_user_asm_byte(__b2, __gu_addr + 1, err); \ - (x) = __b1 | (__b2 << 8); \ -}) -#else -#define __get_user_asm_half(x,__gu_addr,err) \ -({ \ - unsigned long __b1, __b2; \ - __get_user_asm_byte(__b1, __gu_addr, err); \ - __get_user_asm_byte(__b2, __gu_addr + 1, err); \ - (x) = (__b1 << 8) | __b2; \ -}) -#endif - -#define __get_user_asm_word(x,addr,err) \ - __asm__ __volatile__( \ - "1: ldrt %1,[%2],#0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .align 2\n" \ - "3: mov %0, %3\n" \ - " mov %1, #0\n" \ - " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "+r" (err), "=&r" (x) \ - : "r" (addr), "i" (-EFAULT) \ - : "cc") - -#define __put_user(x,ptr) \ -({ \ - long __pu_err = 0; \ - __put_user_err((x),(ptr),__pu_err); \ - __pu_err; \ -}) - -#define __put_user_error(x,ptr,err) \ -({ \ - __put_user_err((x),(ptr),err); \ - (void) 0; \ -}) - -#define __put_user_err(x,ptr,err) \ -do { \ - unsigned long __pu_addr = (unsigned long)(ptr); \ - __typeof__(*(ptr)) __pu_val = (x); \ - __chk_user_ptr(ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \ - case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \ - case 4: __put_user_asm_word(__pu_val,__pu_addr,err); break; \ - case 8: __put_user_asm_dword(__pu_val,__pu_addr,err); break; \ - default: __put_user_bad(); \ - } \ -} while (0) - -#define __put_user_asm_byte(x,__pu_addr,err) \ - __asm__ __volatile__( \ - "1: strbt %1,[%2],#0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .align 2\n" \ - "3: mov %0, %3\n" \ - " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "+r" (err) \ - : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ - : "cc") - -#ifndef __ARMEB__ -#define __put_user_asm_half(x,__pu_addr,err) \ -({ \ - unsigned long __temp = (unsigned long)(x); \ - __put_user_asm_byte(__temp, __pu_addr, err); \ - __put_user_asm_byte(__temp >> 8, __pu_addr + 1, err); \ -}) -#else -#define __put_user_asm_half(x,__pu_addr,err) \ -({ \ - unsigned long __temp = (unsigned long)(x); \ - __put_user_asm_byte(__temp >> 8, __pu_addr, err); \ - __put_user_asm_byte(__temp, __pu_addr + 1, err); \ -}) -#endif - -#define __put_user_asm_word(x,__pu_addr,err) \ - __asm__ __volatile__( \ - "1: strt %1,[%2],#0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .align 2\n" \ - "3: mov %0, %3\n" \ - " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "+r" (err) \ - : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ - : "cc") - -#ifndef __ARMEB__ -#define __reg_oper0 "%R2" -#define __reg_oper1 "%Q2" -#else -#define __reg_oper0 "%Q2" -#define __reg_oper1 "%R2" -#endif - -#define __put_user_asm_dword(x,__pu_addr,err) \ - __asm__ __volatile__( \ - "1: strt " __reg_oper1 ", [%1], #4\n" \ - "2: strt " __reg_oper0 ", [%1], #0\n" \ - "3:\n" \ - " .section .fixup,\"ax\"\n" \ - " .align 2\n" \ - "4: mov %0, %3\n" \ - " b 3b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 4b\n" \ - " .long 2b, 4b\n" \ - " .previous" \ - : "+r" (err), "+r" (__pu_addr) \ - : "r" (x), "i" (-EFAULT) \ - : "cc") - - -#ifdef CONFIG_MMU -extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n); -extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n); -extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n); -#else -#define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0) -#define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0) -#define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0) -#endif - -extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count); -extern unsigned long __must_check __strnlen_user(const char __user *s, long n); - -static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n) -{ - if (access_ok(VERIFY_READ, from, n)) - n = __copy_from_user(to, from, n); - else /* security hole - plug it */ - memzero(to, n); - return n; -} - -static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n) -{ - if (access_ok(VERIFY_WRITE, to, n)) - n = __copy_to_user(to, from, n); - return n; -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -static inline unsigned long __must_check clear_user(void __user *to, unsigned long n) -{ - if (access_ok(VERIFY_WRITE, to, n)) - n = __clear_user(to, n); - return n; -} - -static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res = -EFAULT; - if (access_ok(VERIFY_READ, src, 1)) - res = __strncpy_from_user(dst, src, count); - return res; -} - -#define strlen_user(s) strnlen_user(s, ~0UL >> 1) - -static inline long __must_check strnlen_user(const char __user *s, long n) -{ - unsigned long res = 0; - - if (__addr_ok(s)) - res = __strnlen_user(s, n); - - return res; -} - -#endif /* _ASMARM_UACCESS_H */ diff --git a/include/asm-arm/ucontext.h b/include/asm-arm/ucontext.h deleted file mode 100644 index bf65e9f4525d..000000000000 --- a/include/asm-arm/ucontext.h +++ /dev/null @@ -1,103 +0,0 @@ -#ifndef _ASMARM_UCONTEXT_H -#define _ASMARM_UCONTEXT_H - -#include - -/* - * struct sigcontext only has room for the basic registers, but struct - * ucontext now has room for all registers which need to be saved and - * restored. Coprocessor registers are stored in uc_regspace. Each - * coprocessor's saved state should start with a documented 32-bit magic - * number, followed by a 32-bit word giving the coproccesor's saved size. - * uc_regspace may be expanded if necessary, although this takes some - * coordination with glibc. - */ - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; - /* Allow for uc_sigmask growth. Glibc uses a 1024-bit sigset_t. */ - int __unused[32 - (sizeof (sigset_t) / sizeof (int))]; - /* Last for extensibility. Eight byte aligned because some - coprocessors require eight byte alignment. */ - unsigned long uc_regspace[128] __attribute__((__aligned__(8))); -}; - -#ifdef __KERNEL__ - -/* - * Coprocessor save state. The magic values and specific - * coprocessor's layouts are part of the userspace ABI. Each one of - * these should be a multiple of eight bytes and aligned to eight - * bytes, to prevent unpredictable padding in the signal frame. - */ - -#ifdef CONFIG_CRUNCH -#define CRUNCH_MAGIC 0x5065cf03 -#define CRUNCH_STORAGE_SIZE (CRUNCH_SIZE + 8) - -struct crunch_sigframe { - unsigned long magic; - unsigned long size; - struct crunch_state storage; -} __attribute__((__aligned__(8))); -#endif - -#ifdef CONFIG_IWMMXT -/* iwmmxt_area is 0x98 bytes long, preceeded by 8 bytes of signature */ -#define IWMMXT_MAGIC 0x12ef842a -#define IWMMXT_STORAGE_SIZE (IWMMXT_SIZE + 8) - -struct iwmmxt_sigframe { - unsigned long magic; - unsigned long size; - struct iwmmxt_struct storage; -} __attribute__((__aligned__(8))); -#endif /* CONFIG_IWMMXT */ - -#ifdef CONFIG_VFP -#if __LINUX_ARM_ARCH__ < 6 -/* For ARM pre-v6, we use fstmiax and fldmiax. This adds one extra - * word after the registers, and a word of padding at the end for - * alignment. */ -#define VFP_MAGIC 0x56465001 -#define VFP_STORAGE_SIZE 152 -#else -#define VFP_MAGIC 0x56465002 -#define VFP_STORAGE_SIZE 144 -#endif - -struct vfp_sigframe -{ - unsigned long magic; - unsigned long size; - union vfp_state storage; -}; -#endif /* CONFIG_VFP */ - -/* - * Auxiliary signal frame. This saves stuff like FP state. - * The layout of this structure is not part of the user ABI, - * because the config options aren't. uc_regspace is really - * one of these. - */ -struct aux_sigframe { -#ifdef CONFIG_CRUNCH - struct crunch_sigframe crunch; -#endif -#ifdef CONFIG_IWMMXT - struct iwmmxt_sigframe iwmmxt; -#endif -#if 0 && defined CONFIG_VFP /* Not yet saved. */ - struct vfp_sigframe vfp; -#endif - /* Something that isn't a valid magic number for any coprocessor. */ - unsigned long end_magic; -} __attribute__((__aligned__(8))); - -#endif - -#endif /* !_ASMARM_UCONTEXT_H */ diff --git a/include/asm-arm/unaligned.h b/include/asm-arm/unaligned.h deleted file mode 100644 index 44593a894903..000000000000 --- a/include/asm-arm/unaligned.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_ARM_UNALIGNED_H -#define _ASM_ARM_UNALIGNED_H - -#include -#include -#include - -/* - * Select endianness - */ -#ifndef __ARMEB__ -#define get_unaligned __get_unaligned_le -#define put_unaligned __put_unaligned_le -#else -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be -#endif - -#endif /* _ASM_ARM_UNALIGNED_H */ diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h deleted file mode 100644 index 7c570082b1e0..000000000000 --- a/include/asm-arm/unistd.h +++ /dev/null @@ -1,450 +0,0 @@ -/* - * linux/include/asm-arm/unistd.h - * - * Copyright (C) 2001-2005 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Please forward _all_ changes to this file to rmk@arm.linux.org.uk, - * no matter what the change is. Thanks! - */ -#ifndef __ASM_ARM_UNISTD_H -#define __ASM_ARM_UNISTD_H - -#define __NR_OABI_SYSCALL_BASE 0x900000 - -#if defined(__thumb__) || defined(__ARM_EABI__) -#define __NR_SYSCALL_BASE 0 -#else -#define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE -#endif - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0) -#define __NR_exit (__NR_SYSCALL_BASE+ 1) -#define __NR_fork (__NR_SYSCALL_BASE+ 2) -#define __NR_read (__NR_SYSCALL_BASE+ 3) -#define __NR_write (__NR_SYSCALL_BASE+ 4) -#define __NR_open (__NR_SYSCALL_BASE+ 5) -#define __NR_close (__NR_SYSCALL_BASE+ 6) - /* 7 was sys_waitpid */ -#define __NR_creat (__NR_SYSCALL_BASE+ 8) -#define __NR_link (__NR_SYSCALL_BASE+ 9) -#define __NR_unlink (__NR_SYSCALL_BASE+ 10) -#define __NR_execve (__NR_SYSCALL_BASE+ 11) -#define __NR_chdir (__NR_SYSCALL_BASE+ 12) -#define __NR_time (__NR_SYSCALL_BASE+ 13) -#define __NR_mknod (__NR_SYSCALL_BASE+ 14) -#define __NR_chmod (__NR_SYSCALL_BASE+ 15) -#define __NR_lchown (__NR_SYSCALL_BASE+ 16) - /* 17 was sys_break */ - /* 18 was sys_stat */ -#define __NR_lseek (__NR_SYSCALL_BASE+ 19) -#define __NR_getpid (__NR_SYSCALL_BASE+ 20) -#define __NR_mount (__NR_SYSCALL_BASE+ 21) -#define __NR_umount (__NR_SYSCALL_BASE+ 22) -#define __NR_setuid (__NR_SYSCALL_BASE+ 23) -#define __NR_getuid (__NR_SYSCALL_BASE+ 24) -#define __NR_stime (__NR_SYSCALL_BASE+ 25) -#define __NR_ptrace (__NR_SYSCALL_BASE+ 26) -#define __NR_alarm (__NR_SYSCALL_BASE+ 27) - /* 28 was sys_fstat */ -#define __NR_pause (__NR_SYSCALL_BASE+ 29) -#define __NR_utime (__NR_SYSCALL_BASE+ 30) - /* 31 was sys_stty */ - /* 32 was sys_gtty */ -#define __NR_access (__NR_SYSCALL_BASE+ 33) -#define __NR_nice (__NR_SYSCALL_BASE+ 34) - /* 35 was sys_ftime */ -#define __NR_sync (__NR_SYSCALL_BASE+ 36) -#define __NR_kill (__NR_SYSCALL_BASE+ 37) -#define __NR_rename (__NR_SYSCALL_BASE+ 38) -#define __NR_mkdir (__NR_SYSCALL_BASE+ 39) -#define __NR_rmdir (__NR_SYSCALL_BASE+ 40) -#define __NR_dup (__NR_SYSCALL_BASE+ 41) -#define __NR_pipe (__NR_SYSCALL_BASE+ 42) -#define __NR_times (__NR_SYSCALL_BASE+ 43) - /* 44 was sys_prof */ -#define __NR_brk (__NR_SYSCALL_BASE+ 45) -#define __NR_setgid (__NR_SYSCALL_BASE+ 46) -#define __NR_getgid (__NR_SYSCALL_BASE+ 47) - /* 48 was sys_signal */ -#define __NR_geteuid (__NR_SYSCALL_BASE+ 49) -#define __NR_getegid (__NR_SYSCALL_BASE+ 50) -#define __NR_acct (__NR_SYSCALL_BASE+ 51) -#define __NR_umount2 (__NR_SYSCALL_BASE+ 52) - /* 53 was sys_lock */ -#define __NR_ioctl (__NR_SYSCALL_BASE+ 54) -#define __NR_fcntl (__NR_SYSCALL_BASE+ 55) - /* 56 was sys_mpx */ -#define __NR_setpgid (__NR_SYSCALL_BASE+ 57) - /* 58 was sys_ulimit */ - /* 59 was sys_olduname */ -#define __NR_umask (__NR_SYSCALL_BASE+ 60) -#define __NR_chroot (__NR_SYSCALL_BASE+ 61) -#define __NR_ustat (__NR_SYSCALL_BASE+ 62) -#define __NR_dup2 (__NR_SYSCALL_BASE+ 63) -#define __NR_getppid (__NR_SYSCALL_BASE+ 64) -#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65) -#define __NR_setsid (__NR_SYSCALL_BASE+ 66) -#define __NR_sigaction (__NR_SYSCALL_BASE+ 67) - /* 68 was sys_sgetmask */ - /* 69 was sys_ssetmask */ -#define __NR_setreuid (__NR_SYSCALL_BASE+ 70) -#define __NR_setregid (__NR_SYSCALL_BASE+ 71) -#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72) -#define __NR_sigpending (__NR_SYSCALL_BASE+ 73) -#define __NR_sethostname (__NR_SYSCALL_BASE+ 74) -#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75) -#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */ -#define __NR_getrusage (__NR_SYSCALL_BASE+ 77) -#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78) -#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79) -#define __NR_getgroups (__NR_SYSCALL_BASE+ 80) -#define __NR_setgroups (__NR_SYSCALL_BASE+ 81) -#define __NR_select (__NR_SYSCALL_BASE+ 82) -#define __NR_symlink (__NR_SYSCALL_BASE+ 83) - /* 84 was sys_lstat */ -#define __NR_readlink (__NR_SYSCALL_BASE+ 85) -#define __NR_uselib (__NR_SYSCALL_BASE+ 86) -#define __NR_swapon (__NR_SYSCALL_BASE+ 87) -#define __NR_reboot (__NR_SYSCALL_BASE+ 88) -#define __NR_readdir (__NR_SYSCALL_BASE+ 89) -#define __NR_mmap (__NR_SYSCALL_BASE+ 90) -#define __NR_munmap (__NR_SYSCALL_BASE+ 91) -#define __NR_truncate (__NR_SYSCALL_BASE+ 92) -#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93) -#define __NR_fchmod (__NR_SYSCALL_BASE+ 94) -#define __NR_fchown (__NR_SYSCALL_BASE+ 95) -#define __NR_getpriority (__NR_SYSCALL_BASE+ 96) -#define __NR_setpriority (__NR_SYSCALL_BASE+ 97) - /* 98 was sys_profil */ -#define __NR_statfs (__NR_SYSCALL_BASE+ 99) -#define __NR_fstatfs (__NR_SYSCALL_BASE+100) - /* 101 was sys_ioperm */ -#define __NR_socketcall (__NR_SYSCALL_BASE+102) -#define __NR_syslog (__NR_SYSCALL_BASE+103) -#define __NR_setitimer (__NR_SYSCALL_BASE+104) -#define __NR_getitimer (__NR_SYSCALL_BASE+105) -#define __NR_stat (__NR_SYSCALL_BASE+106) -#define __NR_lstat (__NR_SYSCALL_BASE+107) -#define __NR_fstat (__NR_SYSCALL_BASE+108) - /* 109 was sys_uname */ - /* 110 was sys_iopl */ -#define __NR_vhangup (__NR_SYSCALL_BASE+111) - /* 112 was sys_idle */ -#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */ -#define __NR_wait4 (__NR_SYSCALL_BASE+114) -#define __NR_swapoff (__NR_SYSCALL_BASE+115) -#define __NR_sysinfo (__NR_SYSCALL_BASE+116) -#define __NR_ipc (__NR_SYSCALL_BASE+117) -#define __NR_fsync (__NR_SYSCALL_BASE+118) -#define __NR_sigreturn (__NR_SYSCALL_BASE+119) -#define __NR_clone (__NR_SYSCALL_BASE+120) -#define __NR_setdomainname (__NR_SYSCALL_BASE+121) -#define __NR_uname (__NR_SYSCALL_BASE+122) - /* 123 was sys_modify_ldt */ -#define __NR_adjtimex (__NR_SYSCALL_BASE+124) -#define __NR_mprotect (__NR_SYSCALL_BASE+125) -#define __NR_sigprocmask (__NR_SYSCALL_BASE+126) - /* 127 was sys_create_module */ -#define __NR_init_module (__NR_SYSCALL_BASE+128) -#define __NR_delete_module (__NR_SYSCALL_BASE+129) - /* 130 was sys_get_kernel_syms */ -#define __NR_quotactl (__NR_SYSCALL_BASE+131) -#define __NR_getpgid (__NR_SYSCALL_BASE+132) -#define __NR_fchdir (__NR_SYSCALL_BASE+133) -#define __NR_bdflush (__NR_SYSCALL_BASE+134) -#define __NR_sysfs (__NR_SYSCALL_BASE+135) -#define __NR_personality (__NR_SYSCALL_BASE+136) - /* 137 was sys_afs_syscall */ -#define __NR_setfsuid (__NR_SYSCALL_BASE+138) -#define __NR_setfsgid (__NR_SYSCALL_BASE+139) -#define __NR__llseek (__NR_SYSCALL_BASE+140) -#define __NR_getdents (__NR_SYSCALL_BASE+141) -#define __NR__newselect (__NR_SYSCALL_BASE+142) -#define __NR_flock (__NR_SYSCALL_BASE+143) -#define __NR_msync (__NR_SYSCALL_BASE+144) -#define __NR_readv (__NR_SYSCALL_BASE+145) -#define __NR_writev (__NR_SYSCALL_BASE+146) -#define __NR_getsid (__NR_SYSCALL_BASE+147) -#define __NR_fdatasync (__NR_SYSCALL_BASE+148) -#define __NR__sysctl (__NR_SYSCALL_BASE+149) -#define __NR_mlock (__NR_SYSCALL_BASE+150) -#define __NR_munlock (__NR_SYSCALL_BASE+151) -#define __NR_mlockall (__NR_SYSCALL_BASE+152) -#define __NR_munlockall (__NR_SYSCALL_BASE+153) -#define __NR_sched_setparam (__NR_SYSCALL_BASE+154) -#define __NR_sched_getparam (__NR_SYSCALL_BASE+155) -#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156) -#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157) -#define __NR_sched_yield (__NR_SYSCALL_BASE+158) -#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159) -#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160) -#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161) -#define __NR_nanosleep (__NR_SYSCALL_BASE+162) -#define __NR_mremap (__NR_SYSCALL_BASE+163) -#define __NR_setresuid (__NR_SYSCALL_BASE+164) -#define __NR_getresuid (__NR_SYSCALL_BASE+165) - /* 166 was sys_vm86 */ - /* 167 was sys_query_module */ -#define __NR_poll (__NR_SYSCALL_BASE+168) -#define __NR_nfsservctl (__NR_SYSCALL_BASE+169) -#define __NR_setresgid (__NR_SYSCALL_BASE+170) -#define __NR_getresgid (__NR_SYSCALL_BASE+171) -#define __NR_prctl (__NR_SYSCALL_BASE+172) -#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173) -#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174) -#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175) -#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176) -#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177) -#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178) -#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179) -#define __NR_pread64 (__NR_SYSCALL_BASE+180) -#define __NR_pwrite64 (__NR_SYSCALL_BASE+181) -#define __NR_chown (__NR_SYSCALL_BASE+182) -#define __NR_getcwd (__NR_SYSCALL_BASE+183) -#define __NR_capget (__NR_SYSCALL_BASE+184) -#define __NR_capset (__NR_SYSCALL_BASE+185) -#define __NR_sigaltstack (__NR_SYSCALL_BASE+186) -#define __NR_sendfile (__NR_SYSCALL_BASE+187) - /* 188 reserved */ - /* 189 reserved */ -#define __NR_vfork (__NR_SYSCALL_BASE+190) -#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */ -#define __NR_mmap2 (__NR_SYSCALL_BASE+192) -#define __NR_truncate64 (__NR_SYSCALL_BASE+193) -#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194) -#define __NR_stat64 (__NR_SYSCALL_BASE+195) -#define __NR_lstat64 (__NR_SYSCALL_BASE+196) -#define __NR_fstat64 (__NR_SYSCALL_BASE+197) -#define __NR_lchown32 (__NR_SYSCALL_BASE+198) -#define __NR_getuid32 (__NR_SYSCALL_BASE+199) -#define __NR_getgid32 (__NR_SYSCALL_BASE+200) -#define __NR_geteuid32 (__NR_SYSCALL_BASE+201) -#define __NR_getegid32 (__NR_SYSCALL_BASE+202) -#define __NR_setreuid32 (__NR_SYSCALL_BASE+203) -#define __NR_setregid32 (__NR_SYSCALL_BASE+204) -#define __NR_getgroups32 (__NR_SYSCALL_BASE+205) -#define __NR_setgroups32 (__NR_SYSCALL_BASE+206) -#define __NR_fchown32 (__NR_SYSCALL_BASE+207) -#define __NR_setresuid32 (__NR_SYSCALL_BASE+208) -#define __NR_getresuid32 (__NR_SYSCALL_BASE+209) -#define __NR_setresgid32 (__NR_SYSCALL_BASE+210) -#define __NR_getresgid32 (__NR_SYSCALL_BASE+211) -#define __NR_chown32 (__NR_SYSCALL_BASE+212) -#define __NR_setuid32 (__NR_SYSCALL_BASE+213) -#define __NR_setgid32 (__NR_SYSCALL_BASE+214) -#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215) -#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216) -#define __NR_getdents64 (__NR_SYSCALL_BASE+217) -#define __NR_pivot_root (__NR_SYSCALL_BASE+218) -#define __NR_mincore (__NR_SYSCALL_BASE+219) -#define __NR_madvise (__NR_SYSCALL_BASE+220) -#define __NR_fcntl64 (__NR_SYSCALL_BASE+221) - /* 222 for tux */ - /* 223 is unused */ -#define __NR_gettid (__NR_SYSCALL_BASE+224) -#define __NR_readahead (__NR_SYSCALL_BASE+225) -#define __NR_setxattr (__NR_SYSCALL_BASE+226) -#define __NR_lsetxattr (__NR_SYSCALL_BASE+227) -#define __NR_fsetxattr (__NR_SYSCALL_BASE+228) -#define __NR_getxattr (__NR_SYSCALL_BASE+229) -#define __NR_lgetxattr (__NR_SYSCALL_BASE+230) -#define __NR_fgetxattr (__NR_SYSCALL_BASE+231) -#define __NR_listxattr (__NR_SYSCALL_BASE+232) -#define __NR_llistxattr (__NR_SYSCALL_BASE+233) -#define __NR_flistxattr (__NR_SYSCALL_BASE+234) -#define __NR_removexattr (__NR_SYSCALL_BASE+235) -#define __NR_lremovexattr (__NR_SYSCALL_BASE+236) -#define __NR_fremovexattr (__NR_SYSCALL_BASE+237) -#define __NR_tkill (__NR_SYSCALL_BASE+238) -#define __NR_sendfile64 (__NR_SYSCALL_BASE+239) -#define __NR_futex (__NR_SYSCALL_BASE+240) -#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241) -#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242) -#define __NR_io_setup (__NR_SYSCALL_BASE+243) -#define __NR_io_destroy (__NR_SYSCALL_BASE+244) -#define __NR_io_getevents (__NR_SYSCALL_BASE+245) -#define __NR_io_submit (__NR_SYSCALL_BASE+246) -#define __NR_io_cancel (__NR_SYSCALL_BASE+247) -#define __NR_exit_group (__NR_SYSCALL_BASE+248) -#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249) -#define __NR_epoll_create (__NR_SYSCALL_BASE+250) -#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251) -#define __NR_epoll_wait (__NR_SYSCALL_BASE+252) -#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253) - /* 254 for set_thread_area */ - /* 255 for get_thread_area */ -#define __NR_set_tid_address (__NR_SYSCALL_BASE+256) -#define __NR_timer_create (__NR_SYSCALL_BASE+257) -#define __NR_timer_settime (__NR_SYSCALL_BASE+258) -#define __NR_timer_gettime (__NR_SYSCALL_BASE+259) -#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260) -#define __NR_timer_delete (__NR_SYSCALL_BASE+261) -#define __NR_clock_settime (__NR_SYSCALL_BASE+262) -#define __NR_clock_gettime (__NR_SYSCALL_BASE+263) -#define __NR_clock_getres (__NR_SYSCALL_BASE+264) -#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265) -#define __NR_statfs64 (__NR_SYSCALL_BASE+266) -#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267) -#define __NR_tgkill (__NR_SYSCALL_BASE+268) -#define __NR_utimes (__NR_SYSCALL_BASE+269) -#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270) -#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271) -#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272) -#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273) -#define __NR_mq_open (__NR_SYSCALL_BASE+274) -#define __NR_mq_unlink (__NR_SYSCALL_BASE+275) -#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276) -#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277) -#define __NR_mq_notify (__NR_SYSCALL_BASE+278) -#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279) -#define __NR_waitid (__NR_SYSCALL_BASE+280) -#define __NR_socket (__NR_SYSCALL_BASE+281) -#define __NR_bind (__NR_SYSCALL_BASE+282) -#define __NR_connect (__NR_SYSCALL_BASE+283) -#define __NR_listen (__NR_SYSCALL_BASE+284) -#define __NR_accept (__NR_SYSCALL_BASE+285) -#define __NR_getsockname (__NR_SYSCALL_BASE+286) -#define __NR_getpeername (__NR_SYSCALL_BASE+287) -#define __NR_socketpair (__NR_SYSCALL_BASE+288) -#define __NR_send (__NR_SYSCALL_BASE+289) -#define __NR_sendto (__NR_SYSCALL_BASE+290) -#define __NR_recv (__NR_SYSCALL_BASE+291) -#define __NR_recvfrom (__NR_SYSCALL_BASE+292) -#define __NR_shutdown (__NR_SYSCALL_BASE+293) -#define __NR_setsockopt (__NR_SYSCALL_BASE+294) -#define __NR_getsockopt (__NR_SYSCALL_BASE+295) -#define __NR_sendmsg (__NR_SYSCALL_BASE+296) -#define __NR_recvmsg (__NR_SYSCALL_BASE+297) -#define __NR_semop (__NR_SYSCALL_BASE+298) -#define __NR_semget (__NR_SYSCALL_BASE+299) -#define __NR_semctl (__NR_SYSCALL_BASE+300) -#define __NR_msgsnd (__NR_SYSCALL_BASE+301) -#define __NR_msgrcv (__NR_SYSCALL_BASE+302) -#define __NR_msgget (__NR_SYSCALL_BASE+303) -#define __NR_msgctl (__NR_SYSCALL_BASE+304) -#define __NR_shmat (__NR_SYSCALL_BASE+305) -#define __NR_shmdt (__NR_SYSCALL_BASE+306) -#define __NR_shmget (__NR_SYSCALL_BASE+307) -#define __NR_shmctl (__NR_SYSCALL_BASE+308) -#define __NR_add_key (__NR_SYSCALL_BASE+309) -#define __NR_request_key (__NR_SYSCALL_BASE+310) -#define __NR_keyctl (__NR_SYSCALL_BASE+311) -#define __NR_semtimedop (__NR_SYSCALL_BASE+312) -#define __NR_vserver (__NR_SYSCALL_BASE+313) -#define __NR_ioprio_set (__NR_SYSCALL_BASE+314) -#define __NR_ioprio_get (__NR_SYSCALL_BASE+315) -#define __NR_inotify_init (__NR_SYSCALL_BASE+316) -#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317) -#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318) -#define __NR_mbind (__NR_SYSCALL_BASE+319) -#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320) -#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321) -#define __NR_openat (__NR_SYSCALL_BASE+322) -#define __NR_mkdirat (__NR_SYSCALL_BASE+323) -#define __NR_mknodat (__NR_SYSCALL_BASE+324) -#define __NR_fchownat (__NR_SYSCALL_BASE+325) -#define __NR_futimesat (__NR_SYSCALL_BASE+326) -#define __NR_fstatat64 (__NR_SYSCALL_BASE+327) -#define __NR_unlinkat (__NR_SYSCALL_BASE+328) -#define __NR_renameat (__NR_SYSCALL_BASE+329) -#define __NR_linkat (__NR_SYSCALL_BASE+330) -#define __NR_symlinkat (__NR_SYSCALL_BASE+331) -#define __NR_readlinkat (__NR_SYSCALL_BASE+332) -#define __NR_fchmodat (__NR_SYSCALL_BASE+333) -#define __NR_faccessat (__NR_SYSCALL_BASE+334) - /* 335 for pselect6 */ - /* 336 for ppoll */ -#define __NR_unshare (__NR_SYSCALL_BASE+337) -#define __NR_set_robust_list (__NR_SYSCALL_BASE+338) -#define __NR_get_robust_list (__NR_SYSCALL_BASE+339) -#define __NR_splice (__NR_SYSCALL_BASE+340) -#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341) -#define __NR_sync_file_range2 __NR_arm_sync_file_range -#define __NR_tee (__NR_SYSCALL_BASE+342) -#define __NR_vmsplice (__NR_SYSCALL_BASE+343) -#define __NR_move_pages (__NR_SYSCALL_BASE+344) -#define __NR_getcpu (__NR_SYSCALL_BASE+345) - /* 346 for epoll_pwait */ -#define __NR_kexec_load (__NR_SYSCALL_BASE+347) -#define __NR_utimensat (__NR_SYSCALL_BASE+348) -#define __NR_signalfd (__NR_SYSCALL_BASE+349) -#define __NR_timerfd_create (__NR_SYSCALL_BASE+350) -#define __NR_eventfd (__NR_SYSCALL_BASE+351) -#define __NR_fallocate (__NR_SYSCALL_BASE+352) -#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) -#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) - -/* - * The following SWIs are ARM private. - */ -#define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000) -#define __ARM_NR_breakpoint (__ARM_NR_BASE+1) -#define __ARM_NR_cacheflush (__ARM_NR_BASE+2) -#define __ARM_NR_usr26 (__ARM_NR_BASE+3) -#define __ARM_NR_usr32 (__ARM_NR_BASE+4) -#define __ARM_NR_set_tls (__ARM_NR_BASE+5) - -/* - * The following syscalls are obsolete and no longer available for EABI. - */ -#if defined(__ARM_EABI__) && !defined(__KERNEL__) -#undef __NR_time -#undef __NR_umount -#undef __NR_stime -#undef __NR_alarm -#undef __NR_utime -#undef __NR_getrlimit -#undef __NR_select -#undef __NR_readdir -#undef __NR_mmap -#undef __NR_socketcall -#undef __NR_syscall -#undef __NR_ipc -#endif - -#ifdef __KERNEL__ - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION - -#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT) -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_SYS_SOCKETCALL -#endif - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") - -/* - * Unimplemented (or alternatively implemented) syscalls - */ -#define __IGNORE_fadvise64_64 1 - -#endif /* __KERNEL__ */ -#endif /* __ASM_ARM_UNISTD_H */ diff --git a/include/asm-arm/user.h b/include/asm-arm/user.h deleted file mode 100644 index 825c1e7c582d..000000000000 --- a/include/asm-arm/user.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef _ARM_USER_H -#define _ARM_USER_H - -#include -#include -/* Core file format: The core file is written in such a way that gdb - can understand it and provide useful information to the user (under - linux we use the 'trad-core' bfd). There are quite a number of - obstacles to being able to view the contents of the floating point - registers, and until these are solved you will not be able to view the - contents of them. Actually, you can read in the core file and look at - the contents of the user struct to find out what the floating point - registers contain. - The actual file contents are as follows: - UPAGE: 1 page consisting of a user struct that tells gdb what is present - in the file. Directly after this is a copy of the task_struct, which - is currently not used by gdb, but it may come in useful at some point. - All of the registers are stored as part of the upage. The upage should - always be only one page. - DATA: The data area is stored. We use current->end_text to - current->brk to pick up all of the user variables, plus any memory - that may have been malloced. No attempt is made to determine if a page - is demand-zero or if a page is totally unused, we just cover the entire - range. All of the addresses are rounded in such a way that an integral - number of pages is written. - STACK: We need the stack information in order to get a meaningful - backtrace. We need to write the data from (esp) to - current->start_stack, so we round each of these off in order to be able - to write an integer number of pages. - The minimum core file size is 3 pages, or 12288 bytes. -*/ - -struct user_fp { - struct fp_reg { - unsigned int sign1:1; - unsigned int unused:15; - unsigned int sign2:1; - unsigned int exponent:14; - unsigned int j:1; - unsigned int mantissa1:31; - unsigned int mantissa0:32; - } fpregs[8]; - unsigned int fpsr:32; - unsigned int fpcr:32; - unsigned char ftype[8]; - unsigned int init_flag; -}; - -/* When the kernel dumps core, it starts by dumping the user struct - - this will be used by gdb to figure out where the data and stack segments - are within the file, and what virtual addresses to use. */ -struct user{ -/* We start with the registers, to mimic the way that "memory" is returned - from the ptrace(3,...) function. */ - struct pt_regs regs; /* Where the registers are actually stored */ -/* ptrace does not yet supply these. Someday.... */ - int u_fpvalid; /* True if math co-processor being used. */ - /* for this mess. Not yet used. */ -/* The rest of this junk is to help gdb figure out what goes where */ - unsigned long int u_tsize; /* Text segment size (pages). */ - unsigned long int u_dsize; /* Data segment size (pages). */ - unsigned long int u_ssize; /* Stack segment size (pages). */ - unsigned long start_code; /* Starting virtual address of text. */ - unsigned long start_stack; /* Starting virtual address of stack area. - This is actually the bottom of the stack, - the top of the stack is always found in the - esp register. */ - long int signal; /* Signal that caused the core dump. */ - int reserved; /* No longer used */ - unsigned long u_ar0; /* Used by gdb to help find the values for */ - /* the registers. */ - unsigned long magic; /* To uniquely identify a core file */ - char u_comm[32]; /* User command that was responsible */ - int u_debugreg[8]; - struct user_fp u_fp; /* FP state */ - struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */ - /* the FP registers. */ -}; -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif /* _ARM_USER_H */ diff --git a/include/asm-arm/vfp.h b/include/asm-arm/vfp.h deleted file mode 100644 index 5f9a2cb3d452..000000000000 --- a/include/asm-arm/vfp.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * linux/include/asm-arm/vfp.h - * - * VFP register definitions. - * First, the standard VFP set. - */ - -#define FPSID cr0 -#define FPSCR cr1 -#define MVFR1 cr6 -#define MVFR0 cr7 -#define FPEXC cr8 -#define FPINST cr9 -#define FPINST2 cr10 - -/* FPSID bits */ -#define FPSID_IMPLEMENTER_BIT (24) -#define FPSID_IMPLEMENTER_MASK (0xff << FPSID_IMPLEMENTER_BIT) -#define FPSID_SOFTWARE (1<<23) -#define FPSID_FORMAT_BIT (21) -#define FPSID_FORMAT_MASK (0x3 << FPSID_FORMAT_BIT) -#define FPSID_NODOUBLE (1<<20) -#define FPSID_ARCH_BIT (16) -#define FPSID_ARCH_MASK (0xF << FPSID_ARCH_BIT) -#define FPSID_PART_BIT (8) -#define FPSID_PART_MASK (0xFF << FPSID_PART_BIT) -#define FPSID_VARIANT_BIT (4) -#define FPSID_VARIANT_MASK (0xF << FPSID_VARIANT_BIT) -#define FPSID_REV_BIT (0) -#define FPSID_REV_MASK (0xF << FPSID_REV_BIT) - -/* FPEXC bits */ -#define FPEXC_EX (1 << 31) -#define FPEXC_EN (1 << 30) -#define FPEXC_DEX (1 << 29) -#define FPEXC_FP2V (1 << 28) -#define FPEXC_VV (1 << 27) -#define FPEXC_TFV (1 << 26) -#define FPEXC_LENGTH_BIT (8) -#define FPEXC_LENGTH_MASK (7 << FPEXC_LENGTH_BIT) -#define FPEXC_IDF (1 << 7) -#define FPEXC_IXF (1 << 4) -#define FPEXC_UFF (1 << 3) -#define FPEXC_OFF (1 << 2) -#define FPEXC_DZF (1 << 1) -#define FPEXC_IOF (1 << 0) -#define FPEXC_TRAP_MASK (FPEXC_IDF|FPEXC_IXF|FPEXC_UFF|FPEXC_OFF|FPEXC_DZF|FPEXC_IOF) - -/* FPSCR bits */ -#define FPSCR_DEFAULT_NAN (1<<25) -#define FPSCR_FLUSHTOZERO (1<<24) -#define FPSCR_ROUND_NEAREST (0<<22) -#define FPSCR_ROUND_PLUSINF (1<<22) -#define FPSCR_ROUND_MINUSINF (2<<22) -#define FPSCR_ROUND_TOZERO (3<<22) -#define FPSCR_RMODE_BIT (22) -#define FPSCR_RMODE_MASK (3 << FPSCR_RMODE_BIT) -#define FPSCR_STRIDE_BIT (20) -#define FPSCR_STRIDE_MASK (3 << FPSCR_STRIDE_BIT) -#define FPSCR_LENGTH_BIT (16) -#define FPSCR_LENGTH_MASK (7 << FPSCR_LENGTH_BIT) -#define FPSCR_IOE (1<<8) -#define FPSCR_DZE (1<<9) -#define FPSCR_OFE (1<<10) -#define FPSCR_UFE (1<<11) -#define FPSCR_IXE (1<<12) -#define FPSCR_IDE (1<<15) -#define FPSCR_IOC (1<<0) -#define FPSCR_DZC (1<<1) -#define FPSCR_OFC (1<<2) -#define FPSCR_UFC (1<<3) -#define FPSCR_IXC (1<<4) -#define FPSCR_IDC (1<<7) - -/* MVFR0 bits */ -#define MVFR0_A_SIMD_BIT (0) -#define MVFR0_A_SIMD_MASK (0xf << MVFR0_A_SIMD_BIT) - -/* Bit patterns for decoding the packaged operation descriptors */ -#define VFPOPDESC_LENGTH_BIT (9) -#define VFPOPDESC_LENGTH_MASK (0x07 << VFPOPDESC_LENGTH_BIT) -#define VFPOPDESC_UNUSED_BIT (24) -#define VFPOPDESC_UNUSED_MASK (0xFF << VFPOPDESC_UNUSED_BIT) -#define VFPOPDESC_OPDESC_MASK (~(VFPOPDESC_LENGTH_MASK | VFPOPDESC_UNUSED_MASK)) diff --git a/include/asm-arm/vfpmacros.h b/include/asm-arm/vfpmacros.h deleted file mode 100644 index cccb3892e73c..000000000000 --- a/include/asm-arm/vfpmacros.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * linux/include/asm-arm/vfpmacros.h - * - * Assembler-only file containing VFP macros and register definitions. - */ -#include "vfp.h" - -@ Macros to allow building with old toolkits (with no VFP support) - .macro VFPFMRX, rd, sysreg, cond - MRC\cond p10, 7, \rd, \sysreg, cr0, 0 @ FMRX \rd, \sysreg - .endm - - .macro VFPFMXR, sysreg, rd, cond - MCR\cond p10, 7, \rd, \sysreg, cr0, 0 @ FMXR \sysreg, \rd - .endm - - @ read all the working registers back into the VFP - .macro VFPFLDMIA, base, tmp -#if __LINUX_ARM_ARCH__ < 6 - LDC p11, cr0, [\base],#33*4 @ FLDMIAX \base!, {d0-d15} -#else - LDC p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d0-d15} -#endif -#ifdef CONFIG_VFPv3 - VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 - and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field - cmp \tmp, #2 @ 32 x 64bit registers? - ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} - addne \base, \base, #32*4 @ step over unused register space -#endif - .endm - - @ write all the working registers out of the VFP - .macro VFPFSTMIA, base, tmp -#if __LINUX_ARM_ARCH__ < 6 - STC p11, cr0, [\base],#33*4 @ FSTMIAX \base!, {d0-d15} -#else - STC p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d0-d15} -#endif -#ifdef CONFIG_VFPv3 - VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 - and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field - cmp \tmp, #2 @ 32 x 64bit registers? - stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} - addne \base, \base, #32*4 @ step over unused register space -#endif - .endm diff --git a/include/asm-arm/vga.h b/include/asm-arm/vga.h deleted file mode 100644 index 1e0b913c3d71..000000000000 --- a/include/asm-arm/vga.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef ASMARM_VGA_H -#define ASMARM_VGA_H - -#include -#include - -#define VGA_MAP_MEM(x,s) (PCIMEM_BASE + (x)) - -#define vga_readb(x) (*((volatile unsigned char *)x)) -#define vga_writeb(x,y) (*((volatile unsigned char *)y) = (x)) - -#endif diff --git a/include/asm-arm/xor.h b/include/asm-arm/xor.h deleted file mode 100644 index e7c4cf58bed1..000000000000 --- a/include/asm-arm/xor.h +++ /dev/null @@ -1,141 +0,0 @@ -/* - * linux/include/asm-arm/xor.h - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - -#define __XOR(a1, a2) a1 ^= a2 - -#define GET_BLOCK_2(dst) \ - __asm__("ldmia %0, {%1, %2}" \ - : "=r" (dst), "=r" (a1), "=r" (a2) \ - : "0" (dst)) - -#define GET_BLOCK_4(dst) \ - __asm__("ldmia %0, {%1, %2, %3, %4}" \ - : "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \ - : "0" (dst)) - -#define XOR_BLOCK_2(src) \ - __asm__("ldmia %0!, {%1, %2}" \ - : "=r" (src), "=r" (b1), "=r" (b2) \ - : "0" (src)); \ - __XOR(a1, b1); __XOR(a2, b2); - -#define XOR_BLOCK_4(src) \ - __asm__("ldmia %0!, {%1, %2, %3, %4}" \ - : "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \ - : "0" (src)); \ - __XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4) - -#define PUT_BLOCK_2(dst) \ - __asm__ __volatile__("stmia %0!, {%2, %3}" \ - : "=r" (dst) \ - : "0" (dst), "r" (a1), "r" (a2)) - -#define PUT_BLOCK_4(dst) \ - __asm__ __volatile__("stmia %0!, {%2, %3, %4, %5}" \ - : "=r" (dst) \ - : "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4)) - -static void -xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) -{ - unsigned int lines = bytes / sizeof(unsigned long) / 4; - register unsigned int a1 __asm__("r4"); - register unsigned int a2 __asm__("r5"); - register unsigned int a3 __asm__("r6"); - register unsigned int a4 __asm__("r7"); - register unsigned int b1 __asm__("r8"); - register unsigned int b2 __asm__("r9"); - register unsigned int b3 __asm__("ip"); - register unsigned int b4 __asm__("lr"); - - do { - GET_BLOCK_4(p1); - XOR_BLOCK_4(p2); - PUT_BLOCK_4(p1); - } while (--lines); -} - -static void -xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, - unsigned long *p3) -{ - unsigned int lines = bytes / sizeof(unsigned long) / 4; - register unsigned int a1 __asm__("r4"); - register unsigned int a2 __asm__("r5"); - register unsigned int a3 __asm__("r6"); - register unsigned int a4 __asm__("r7"); - register unsigned int b1 __asm__("r8"); - register unsigned int b2 __asm__("r9"); - register unsigned int b3 __asm__("ip"); - register unsigned int b4 __asm__("lr"); - - do { - GET_BLOCK_4(p1); - XOR_BLOCK_4(p2); - XOR_BLOCK_4(p3); - PUT_BLOCK_4(p1); - } while (--lines); -} - -static void -xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, - unsigned long *p3, unsigned long *p4) -{ - unsigned int lines = bytes / sizeof(unsigned long) / 2; - register unsigned int a1 __asm__("r8"); - register unsigned int a2 __asm__("r9"); - register unsigned int b1 __asm__("ip"); - register unsigned int b2 __asm__("lr"); - - do { - GET_BLOCK_2(p1); - XOR_BLOCK_2(p2); - XOR_BLOCK_2(p3); - XOR_BLOCK_2(p4); - PUT_BLOCK_2(p1); - } while (--lines); -} - -static void -xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, - unsigned long *p3, unsigned long *p4, unsigned long *p5) -{ - unsigned int lines = bytes / sizeof(unsigned long) / 2; - register unsigned int a1 __asm__("r8"); - register unsigned int a2 __asm__("r9"); - register unsigned int b1 __asm__("ip"); - register unsigned int b2 __asm__("lr"); - - do { - GET_BLOCK_2(p1); - XOR_BLOCK_2(p2); - XOR_BLOCK_2(p3); - XOR_BLOCK_2(p4); - XOR_BLOCK_2(p5); - PUT_BLOCK_2(p1); - } while (--lines); -} - -static struct xor_block_template xor_block_arm4regs = { - .name = "arm4regs", - .do_2 = xor_arm4regs_2, - .do_3 = xor_arm4regs_3, - .do_4 = xor_arm4regs_4, - .do_5 = xor_arm4regs_5, -}; - -#undef XOR_TRY_TEMPLATES -#define XOR_TRY_TEMPLATES \ - do { \ - xor_speed(&xor_block_arm4regs); \ - xor_speed(&xor_block_8regs); \ - xor_speed(&xor_block_32regs); \ - } while (0) -- cgit v1.2.3 From bccf650270a94cec6e9238743e84c6e01de30c70 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 2 Aug 2008 22:33:18 +0100 Subject: [ARM] Fix explicit asm(-arm)?/arch-foo references No file should be explicitly referencing its own platform headers by specifying an absolute include path. Fix these paths to use standard includes. Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/board-a9m9750dev.c | 12 ++++++------ arch/arm/mach-ns9xxx/gpio-ns9360.c | 4 ++-- arch/arm/mach-ns9xxx/gpio.c | 6 +++--- arch/arm/mach-ns9xxx/irq.c | 6 +++--- arch/arm/mach-ns9xxx/mach-cc9p9360dev.c | 2 +- arch/arm/mach-ns9xxx/mach-cc9p9360js.c | 2 +- arch/arm/mach-ns9xxx/plat-serial8250.c | 4 ++-- arch/arm/mach-ns9xxx/processor-ns9360.c | 4 ++-- arch/arm/mach-ns9xxx/time-ns9360.c | 6 +++--- drivers/mtd/maps/ipaq-flash.c | 2 +- include/asm-arm/arch-ns9xxx/debug-macro.S | 2 +- include/asm-arm/arch-ns9xxx/entry-macro.S | 2 +- include/asm-arm/arch-ns9xxx/processor.h | 2 +- include/asm-arm/arch-ns9xxx/system.h | 4 ++-- include/asm-arm/arch-omap/board.h | 2 +- 15 files changed, 30 insertions(+), 30 deletions(-) diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c index a494b71c0195..46b4f5a2e7f4 100644 --- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c +++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c @@ -13,12 +13,12 @@ #include #include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include #include "board-a9m9750dev.h" diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.c b/arch/arm/mach-ns9xxx/gpio-ns9360.c index cabfb879dda9..7bc05a4b45b8 100644 --- a/arch/arm/mach-ns9xxx/gpio-ns9360.c +++ b/arch/arm/mach-ns9xxx/gpio-ns9360.c @@ -14,8 +14,8 @@ #include #include -#include -#include +#include +#include #include "gpio-ns9360.h" diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c index b3c963b0c8f5..ed4c83389d4a 100644 --- a/arch/arm/mach-ns9xxx/gpio.c +++ b/arch/arm/mach-ns9xxx/gpio.c @@ -13,9 +13,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include #include #include diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c index ca85d24cf39f..d2964257797e 100644 --- a/arch/arm/mach-ns9xxx/irq.c +++ b/arch/arm/mach-ns9xxx/irq.c @@ -13,9 +13,9 @@ #include #include #include -#include -#include -#include +#include +#include +#include #include "generic.h" diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c index 9623fff6b3bc..7714233fb004 100644 --- a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c +++ b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c @@ -11,7 +11,7 @@ #include #include -#include +#include #include "board-a9m9750dev.h" #include "generic.h" diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c index fcc815bdd291..bdbd0bb1a0b3 100644 --- a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c +++ b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c @@ -11,7 +11,7 @@ #include #include -#include +#include #include "board-jscc9p9360.h" #include "generic.h" diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c index 5aa5d9baf8c8..c9cce9b4e6c9 100644 --- a/arch/arm/mach-ns9xxx/plat-serial8250.c +++ b/arch/arm/mach-ns9xxx/plat-serial8250.c @@ -11,8 +11,8 @@ #include #include -#include -#include +#include +#include #define DRIVER_NAME "serial8250" diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c index 2bee0b7fccbb..8ee81b59b35d 100644 --- a/arch/arm/mach-ns9xxx/processor-ns9360.c +++ b/arch/arm/mach-ns9xxx/processor-ns9360.c @@ -14,8 +14,8 @@ #include #include -#include -#include +#include +#include void ns9360_reset(char mode) { diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c index 4d573c9793ed..66bd58262974 100644 --- a/arch/arm/mach-ns9xxx/time-ns9360.c +++ b/arch/arm/mach-ns9xxx/time-ns9360.c @@ -15,9 +15,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include #include "generic.h" diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c index a806119797e0..113b1062020d 100644 --- a/drivers/mtd/maps/ipaq-flash.c +++ b/drivers/mtd/maps/ipaq-flash.c @@ -25,7 +25,7 @@ #endif #include -#include +#include #include diff --git a/include/asm-arm/arch-ns9xxx/debug-macro.S b/include/asm-arm/arch-ns9xxx/debug-macro.S index b21b93eb2dbc..94680950ee67 100644 --- a/include/asm-arm/arch-ns9xxx/debug-macro.S +++ b/include/asm-arm/arch-ns9xxx/debug-macro.S @@ -9,7 +9,7 @@ */ #include -#include +#include .macro addruart,rx mrc p15, 0, \rx, c1, c0 diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S index 89a21c530468..2f6c89ddf958 100644 --- a/include/asm-arm/arch-ns9xxx/entry-macro.S +++ b/include/asm-arm/arch-ns9xxx/entry-macro.S @@ -9,7 +9,7 @@ * the Free Software Foundation. */ #include -#include +#include .macro get_irqnr_preamble, base, tmp ldr \base, =SYS_ISRADDR diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h index f7b53b65de81..3137e5ba01a9 100644 --- a/include/asm-arm/arch-ns9xxx/processor.h +++ b/include/asm-arm/arch-ns9xxx/processor.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_PROCESSOR_H #define __ASM_ARCH_PROCESSOR_H -#include +#include #define processor_is_ns9210() (0 \ || module_is_cc7ucamry() \ diff --git a/include/asm-arm/arch-ns9xxx/system.h b/include/asm-arm/arch-ns9xxx/system.h index 1348073afe48..c2941684d667 100644 --- a/include/asm-arm/arch-ns9xxx/system.h +++ b/include/asm-arm/arch-ns9xxx/system.h @@ -12,8 +12,8 @@ #define __ASM_ARCH_SYSTEM_H #include -#include -#include +#include +#include static inline void arch_idle(void) { diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h index db44c5d1f1a0..99564c70f128 100644 --- a/include/asm-arm/arch-omap/board.h +++ b/include/asm-arm/arch-omap/board.h @@ -154,7 +154,7 @@ struct omap_version_config { }; -#include +#include struct omap_board_config_entry { u16 tag; -- cgit v1.2.3 From 596400f0f322c78347e35c197b66faf09a9c1e02 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sat, 2 Aug 2008 19:53:44 +0300 Subject: sh/boards/Makefile typo fix The following build error was caused by an obvious typo: <-- snip --> ... LD arch/sh/mm/built-in.o make[2]: *** No rule to make target `arch/sh/boards/board-shmin..o', needed by `arch/sh/boards/built-in.o'. Stop. <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/boards/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile index ff9b93c5a91b..463022c7df3c 100644 --- a/arch/sh/boards/Makefile +++ b/arch/sh/boards/Makefile @@ -5,4 +5,4 @@ obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o obj-$(CONFIG_SH_RSK7203) += board-rsk7203.o obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o -obj-$(CONFIG_SH_SHMIN) += board-shmin..o +obj-$(CONFIG_SH_SHMIN) += board-shmin.o -- cgit v1.2.3 From 7d55992d60caa390460bad1a974eb2b3c11538f4 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sat, 2 Aug 2008 21:22:18 -0400 Subject: ext4: remove write-only variables from ext4_ordered_write_end The variables 'from' and 'to' are not used anywhere. Signed-off-by: Eric Sandeen Acked-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 0080999d2cd4..59fbbe899acc 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1424,12 +1424,8 @@ static int ext4_ordered_write_end(struct file *file, { handle_t *handle = ext4_journal_current_handle(); struct inode *inode = mapping->host; - unsigned from, to; int ret = 0, ret2; - from = pos & (PAGE_CACHE_SIZE - 1); - to = from + len; - ret = ext4_jbd2_file_inode(handle, inode); if (ret == 0) { -- cgit v1.2.3 From 5fb662297b8a4bdadd60371c34b760efca948ebc Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 2 Aug 2008 20:02:43 -0700 Subject: pkt_sched: Use qdisc_lock() on already sampled root qdisc. Based upon a bug report by Jeff Kirsher. Don't use qdisc_root_lock() in these cases as the root qdisc could have been changed, and we'd thus lock the wrong object. Tested by Emil S Tantilov who confirms that this seems to fix the problem. Signed-off-by: David S. Miller --- net/core/dev.c | 4 ++-- net/sched/sch_generic.c | 12 ++++++------ 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 69320a56a084..da7acacf02b5 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1796,7 +1796,7 @@ gso: skb->tc_verd = SET_TC_AT(skb->tc_verd,AT_EGRESS); #endif if (q->enqueue) { - spinlock_t *root_lock = qdisc_root_lock(q); + spinlock_t *root_lock = qdisc_lock(q); spin_lock(root_lock); @@ -1995,7 +1995,7 @@ static void net_tx_action(struct softirq_action *h) smp_mb__before_clear_bit(); clear_bit(__QDISC_STATE_SCHED, &q->state); - root_lock = qdisc_root_lock(q); + root_lock = qdisc_lock(q); if (spin_trylock(root_lock)) { qdisc_run(q); spin_unlock(root_lock); diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 9c9cd4d94890..7cf83b37459d 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -29,7 +29,7 @@ /* Main transmission queue. */ /* Modifications to data participating in scheduling must be protected with - * qdisc_root_lock(qdisc) spinlock. + * qdisc_lock(qdisc) spinlock. * * The idea is the following: * - enqueue, dequeue are serialized via qdisc root lock @@ -126,7 +126,7 @@ static inline int qdisc_restart(struct Qdisc *q) if (unlikely((skb = dequeue_skb(q)) == NULL)) return 0; - root_lock = qdisc_root_lock(q); + root_lock = qdisc_lock(q); /* And release qdisc */ spin_unlock(root_lock); @@ -507,7 +507,7 @@ errout: } EXPORT_SYMBOL(qdisc_create_dflt); -/* Under qdisc_root_lock(qdisc) and BH! */ +/* Under qdisc_lock(qdisc) and BH! */ void qdisc_reset(struct Qdisc *qdisc) { @@ -543,7 +543,7 @@ static void __qdisc_destroy(struct rcu_head *head) kfree((char *) qdisc - qdisc->padded); } -/* Under qdisc_root_lock(qdisc) and BH! */ +/* Under qdisc_lock(qdisc) and BH! */ void qdisc_destroy(struct Qdisc *qdisc) { @@ -659,7 +659,7 @@ static bool some_qdisc_is_running(struct net_device *dev, int lock) dev_queue = netdev_get_tx_queue(dev, i); q = dev_queue->qdisc; - root_lock = qdisc_root_lock(q); + root_lock = qdisc_lock(q); if (lock) spin_lock_bh(root_lock); @@ -735,7 +735,7 @@ static void shutdown_scheduler_queue(struct net_device *dev, struct Qdisc *qdisc_default = _qdisc_default; if (qdisc) { - spinlock_t *root_lock = qdisc_root_lock(qdisc); + spinlock_t *root_lock = qdisc_lock(qdisc); dev_queue->qdisc = qdisc_default; dev_queue->qdisc_sleeping = qdisc_default; -- cgit v1.2.3 From 35ed4e75989c4e84a44b25569bbf09b98f923880 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 2 Aug 2008 23:25:50 -0700 Subject: mac80211: Use queue_lock() in ieee80211_ht_agg_queue_remove(). qdisc_root_lock() is only %100 safe to use when the RTNL semaphore is held. Signed-off-by: David S. Miller --- net/mac80211/wme.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index 28437f0001db..4310e2f65661 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -241,12 +241,14 @@ void ieee80211_ht_agg_queue_remove(struct ieee80211_local *local, } else { struct netdev_queue *txq; spinlock_t *root_lock; + struct Qdisc *q; txq = netdev_get_tx_queue(local->mdev, agg_queue); - root_lock = qdisc_root_lock(txq->qdisc); + q = rcu_dereference(txq->qdisc); + root_lock = qdisc_lock(q); spin_lock_bh(root_lock); - qdisc_reset(txq->qdisc); + qdisc_reset(q); spin_unlock_bh(root_lock); } } -- cgit v1.2.3 From 7e43f1128d4c4bd91786ca6abff45a91e88f9776 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 2 Aug 2008 23:27:37 -0700 Subject: pkt_sched: Make sure RTNL is held in qdisc_root_lock(). It is the only legal environment in which this can be used. Add some commentary explaining the situation. Signed-off-by: David S. Miller --- include/net/sch_generic.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index b5f40d7ef724..c5bb13065051 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -193,10 +193,22 @@ static inline struct Qdisc *qdisc_root(struct Qdisc *qdisc) return qdisc->dev_queue->qdisc; } +/* The qdisc root lock is a mechanism by which to top level + * of a qdisc tree can be locked from any qdisc node in the + * forest. This allows changing the configuration of some + * aspect of the qdisc tree while blocking out asynchronous + * qdisc access in the packet processing paths. + * + * It is only legal to do this when the root will not change + * on us. Otherwise we'll potentially lock the wrong qdisc + * root. This is enforced by holding the RTNL semaphore, which + * all users of this lock accessor must do. + */ static inline spinlock_t *qdisc_root_lock(struct Qdisc *qdisc) { struct Qdisc *root = qdisc_root(qdisc); + ASSERT_RTNL(); return qdisc_lock(root); } -- cgit v1.2.3 From bff69732c9947f821a64a8477f7dcaa9c30e6a69 Mon Sep 17 00:00:00 2001 From: Chris Larson Date: Sun, 3 Aug 2008 01:02:41 -0700 Subject: net: in the first call to neigh_seq_next, call neigh_get_first, not neigh_get_idx. neigh_seq_next won't be called both with *pos > 0 && v == SEQ_START_TOKEN, so there's no point calling neigh_get_idx when we're on the start token, just call neigh_get_first directly. Signed-off-by: Chris Larson Signed-off-by: David S. Miller --- net/core/neighbour.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/neighbour.c b/net/core/neighbour.c index f62c8af85d38..a57de755c8cc 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -2385,7 +2385,7 @@ void *neigh_seq_next(struct seq_file *seq, void *v, loff_t *pos) void *rc; if (v == SEQ_START_TOKEN) { - rc = neigh_get_idx(seq, pos); + rc = neigh_get_first(seq); goto out; } -- cgit v1.2.3 From 745e203164a9057e0de769ff4649e6e455daf753 Mon Sep 17 00:00:00 2001 From: Chris Larson Date: Sun, 3 Aug 2008 01:10:55 -0700 Subject: net: fix missing pneigh entries in the neighbor seq_file code When pneigh entries exist, but the user's read buffer isn't sufficient to hold them all, one of the pneigh entries will be missing from the results. In neigh_get_idx_any, the number of elements which neigh_get_idx encountered is not correctly subtracted from the position number before the call to pneigh_get_idx. neigh_get_idx reduces the position by 1 for each call to neigh_get_next, but it does not reduce it by one for the first element (neigh_get_first). The patch alters the neigh_get_idx and pneigh_get_idx functions to subtract one from pos, for the first element, when pos is non-zero. Signed-off-by: Chris Larson Signed-off-by: David S. Miller --- net/core/neighbour.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/net/core/neighbour.c b/net/core/neighbour.c index a57de755c8cc..9d92e41826e7 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -2281,6 +2281,7 @@ static struct neighbour *neigh_get_idx(struct seq_file *seq, loff_t *pos) struct neighbour *n = neigh_get_first(seq); if (n) { + --(*pos); while (*pos) { n = neigh_get_next(seq, n, pos); if (!n) @@ -2341,6 +2342,7 @@ static struct pneigh_entry *pneigh_get_idx(struct seq_file *seq, loff_t *pos) struct pneigh_entry *pn = pneigh_get_first(seq); if (pn) { + --(*pos); while (*pos) { pn = pneigh_get_next(seq, pn, pos); if (!pn) @@ -2354,10 +2356,11 @@ static void *neigh_get_idx_any(struct seq_file *seq, loff_t *pos) { struct neigh_seq_state *state = seq->private; void *rc; + loff_t idxpos = *pos; - rc = neigh_get_idx(seq, pos); + rc = neigh_get_idx(seq, &idxpos); if (!rc && !(state->flags & NEIGH_SEQ_NEIGH_ONLY)) - rc = pneigh_get_idx(seq, pos); + rc = pneigh_get_idx(seq, &idxpos); return rc; } @@ -2366,7 +2369,6 @@ void *neigh_seq_start(struct seq_file *seq, loff_t *pos, struct neigh_table *tbl __acquires(tbl->lock) { struct neigh_seq_state *state = seq->private; - loff_t pos_minus_one; state->tbl = tbl; state->bucket = 0; @@ -2374,8 +2376,7 @@ void *neigh_seq_start(struct seq_file *seq, loff_t *pos, struct neigh_table *tbl read_lock_bh(&tbl->lock); - pos_minus_one = *pos - 1; - return *pos ? neigh_get_idx_any(seq, &pos_minus_one) : SEQ_START_TOKEN; + return *pos ? neigh_get_idx_any(seq, pos) : SEQ_START_TOKEN; } EXPORT_SYMBOL(neigh_seq_start); -- cgit v1.2.3 From e5a4a72d4f88f4389e9340d383ca67031d1b8536 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 3 Aug 2008 01:23:10 -0700 Subject: net: use software GSO for SG+CSUM capable netdevices If a netdevice does not support hardware GSO, allowing the stack to use GSO anyway and then splitting the GSO skb into MSS-sized pieces as it is handed to the netdevice for transmitting is likely still a win as far as throughput and/or CPU usage are concerned, since it reduces the number of trips through the output path. This patch enables the use of GSO on any netdevice that supports SG. If a GSO skb is then sent to a netdevice that supports SG but does not support hardware GSO, net/core/dev.c:dev_hard_start_xmit() will take care of doing the necessary GSO segmentation in software. Signed-off-by: Lennert Buytenhek Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/dev.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/core/dev.c b/net/core/dev.c index da7acacf02b5..cbf80098980c 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3988,6 +3988,10 @@ int register_netdevice(struct net_device *dev) } } + /* Enable software GSO if SG is supported. */ + if (dev->features & NETIF_F_SG) + dev->features |= NETIF_F_GSO; + netdev_initialize_kobject(dev); ret = netdev_register_kobject(dev); if (ret) -- cgit v1.2.3 From cf368d2f9aced8adc8bd6b1f04294a71551d5fce Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 3 Aug 2008 03:03:57 +0400 Subject: drivers/video/console/promcon.c: fix build error drivers/video/console/promcon.c:158: error: implicit declaration of function 'con_protect_unimap' Introduced by commit a29ccf6f823a84d89e1c7aaaf221cf7282022024 ("embedded: fix vc_translate operator precedence"). Signed-off-by: Alexander Beregalov Cc: Tim Bird Signed-off-by: David Woodhouse --- include/linux/vt_kern.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index 8c8119ffee12..1c78d56c57e5 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -86,6 +86,7 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc); #define con_copy_unimap(d, s) (0) #define con_get_unimap(vc, ct, uct, list) (-EINVAL) #define con_free_unimap(vc) do { ; } while (0) +#define con_protect_unimap(vc, rdonly) do { ; } while (0) #define vc_translate(vc, c) (c) #endif -- cgit v1.2.3 From 9cb7117fa4858468014f76bd996076985111e955 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Sun, 3 Aug 2008 00:02:35 +0100 Subject: [ARM] 5182/1: pxa: Fix pcm990 compilation Compiling pcm990 produces an error: In file included from arch/arm/mach-pxa/pcm990-baseboard.c:25: include/linux/ide.h:645: error: 'CONFIG_IDE_MAX_HWIFS' undeclared here (not in a function) Fix it by removing unneeded header include. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Russell King --- arch/arm/mach-pxa/pcm990-baseboard.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 30023b00e476..90056d56b210 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -22,7 +22,6 @@ #include #include -#include #include #include -- cgit v1.2.3 From 8edd744202e83ac2fce13f4898a90b403cc22141 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 3 Aug 2008 22:18:48 +0800 Subject: arch/sh/boards/board-ap325rxa.c: removed duplicated #include Removed duplicated include in arch/sh/boards/board-ap325rxa.c. Signed-off-by: Huang Weiyi Signed-off-by: Paul Mundt --- arch/sh/boards/board-ap325rxa.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 9c71603d29a2..025d4fe55a58 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From c48e64ae574a1e30a23174701560a222a192e4c3 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 3 Aug 2008 22:18:51 +0800 Subject: arch/sh/boards/mach-se/7343/irq.c: removed duplicated #include Removed duplicated include in arch/sh/boards/mach-se/7343/irq.c. Signed-off-by: Huang Weiyi Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7343/irq.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c index 5d96e2eef82a..051c29d4eae0 100644 --- a/arch/sh/boards/mach-se/7343/irq.c +++ b/arch/sh/boards/mach-se/7343/irq.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3 From adf044c8778de98dae29c5ce9973b7e43964674f Mon Sep 17 00:00:00 2001 From: Sven Wegener Date: Sun, 3 Aug 2008 14:06:44 -0700 Subject: net: Add missing extra2 parameter for ip_default_ttl sysctl Commit 76e6ebfb40a2455c18234dcb0f9df37533215461 ("netns: add namespace parameter to rt_cache_flush") acceses the extra2 parameter of the ip_default_ttl ctl_table, but it is never set to a meaningful value. When e84f84f276473dcc673f360e8ff3203148bdf0e2 ("netns: place rt_genid into struct net") is applied, we'll oops in rt_cache_invalidate(). Set extra2 to init_net, to avoid that. Reported-by: Marcin Slusarz Signed-off-by: Sven Wegener Tested-by: Marcin Slusarz Acked-by: Denis V. Lunev Signed-off-by: David S. Miller --- net/ipv4/sysctl_net_ipv4.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index 770d827f5ab8..e0689fd7b798 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -232,6 +232,7 @@ static struct ctl_table ipv4_table[] = { .mode = 0644, .proc_handler = &ipv4_doint_and_flush, .strategy = &ipv4_doint_and_flush_strategy, + .extra2 = &init_net, }, { .ctl_name = NET_IPV4_NO_PMTU_DISC, -- cgit v1.2.3 From c07abb6dbec754511427dd847f10cfdec6d36b3c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 08:11:03 +0900 Subject: sh: /proc/asids depends on MMU. Signed-off-by: Paul Mundt --- arch/sh/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 36f4b1f7066d..4d2d102e00d5 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -182,7 +182,7 @@ if SUPERH64 config SH64_PROC_ASIDS bool "Debug: report ASIDs through /proc/asids" - depends on PROC_FS + depends on PROC_FS && MMU config SH64_SR_WATCH bool "Debug: set SR.WATCH to enable hardware watchpoints and trace" -- cgit v1.2.3 From 86d9d32c7b17f8145dc8cbc9667e6385bf8ebc67 Mon Sep 17 00:00:00 2001 From: Adrian McMenamin Date: Wed, 30 Jul 2008 12:31:38 -0700 Subject: maple: allow removal and reinsertion of keyboard driver module Allow the removal (and subsequent reinsertion) of the maple_keyb (maple keyboard) driver by adding a working removal function. Also tidy long lines. Signed-off-by: Adrian McMenamin Cc: Dmitry Torokhov Cc: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Paul Mundt --- drivers/input/keyboard/maple_keyb.c | 124 +++++++++++++++++++++++------------- 1 file changed, 81 insertions(+), 43 deletions(-) diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c index 7797ef6e5e64..7d13f55b504e 100644 --- a/drivers/input/keyboard/maple_keyb.c +++ b/drivers/input/keyboard/maple_keyb.c @@ -2,7 +2,7 @@ * SEGA Dreamcast keyboard driver * Based on drivers/usb/usbkbd.c * Copyright YAEGASHI Takeshi, 2001 - * Porting to 2.6 Copyright Adrian McMenamin, 2007 + * Porting to 2.6 Copyright Adrian McMenamin, 2007, 2008 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -45,39 +45,51 @@ struct dc_kbd { }; static const unsigned short dc_kbd_keycode[NR_SCANCODES] = { - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_A, KEY_B, KEY_C, KEY_D, - KEY_E, KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, - KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, - KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_1, KEY_2, - KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_0, - KEY_ENTER, KEY_ESC, KEY_BACKSPACE, KEY_TAB, KEY_SPACE, KEY_MINUS, KEY_EQUAL, KEY_LEFTBRACE, - KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_BACKSLASH, KEY_SEMICOLON, KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA, - KEY_DOT, KEY_SLASH, KEY_CAPSLOCK, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_A, KEY_B, + KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, + KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, KEY_V, + KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, + KEY_7, KEY_8, KEY_9, KEY_0, KEY_ENTER, KEY_ESC, KEY_BACKSPACE, + KEY_TAB, KEY_SPACE, KEY_MINUS, KEY_EQUAL, KEY_LEFTBRACE, + KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_BACKSLASH, KEY_SEMICOLON, + KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA, KEY_DOT, KEY_SLASH, + KEY_CAPSLOCK, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_F12, KEY_SYSRQ, - KEY_SCROLLLOCK, KEY_PAUSE, KEY_INSERT, KEY_HOME, KEY_PAGEUP, KEY_DELETE, - KEY_END, KEY_PAGEDOWN, KEY_RIGHT, KEY_LEFT, KEY_DOWN, KEY_UP, - KEY_NUMLOCK, KEY_KPSLASH, KEY_KPASTERISK, KEY_KPMINUS, KEY_KPPLUS, KEY_KPENTER, KEY_KP1, KEY_KP2, - KEY_KP3, KEY_KP4, KEY_KP5, KEY_KP6, KEY_KP7, KEY_KP8, KEY_KP9, KEY_KP0, KEY_KPDOT, - KEY_102ND, KEY_COMPOSE, KEY_POWER, KEY_KPEQUAL, KEY_F13, KEY_F14, KEY_F15, - KEY_F16, KEY_F17, KEY_F18, KEY_F19, KEY_F20, - KEY_F21, KEY_F22, KEY_F23, KEY_F24, KEY_OPEN, KEY_HELP, KEY_PROPS, KEY_FRONT, - KEY_STOP, KEY_AGAIN, KEY_UNDO, KEY_CUT, KEY_COPY, KEY_PASTE, KEY_FIND, KEY_MUTE, - KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_KPCOMMA, KEY_RESERVED, KEY_RO, KEY_KATAKANAHIRAGANA , KEY_YEN, - KEY_HENKAN, KEY_MUHENKAN, KEY_KPJPCOMMA, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_HANGEUL, KEY_HANJA, KEY_KATAKANA, KEY_HIRAGANA, KEY_ZENKAKUHANKAKU, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_LEFTCTRL, KEY_LEFTSHIFT, KEY_LEFTALT, KEY_LEFTMETA, KEY_RIGHTCTRL, KEY_RIGHTSHIFT, KEY_RIGHTALT, KEY_RIGHTMETA, - KEY_PLAYPAUSE, KEY_STOPCD, KEY_PREVIOUSSONG, KEY_NEXTSONG, KEY_EJECTCD, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE, - KEY_WWW, KEY_BACK, KEY_FORWARD, KEY_STOP, KEY_FIND, KEY_SCROLLUP, KEY_SCROLLDOWN, KEY_EDIT, KEY_SLEEP, - KEY_SCREENLOCK, KEY_REFRESH, KEY_CALC, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED + KEY_SCROLLLOCK, KEY_PAUSE, KEY_INSERT, KEY_HOME, KEY_PAGEUP, + KEY_DELETE, KEY_END, KEY_PAGEDOWN, KEY_RIGHT, KEY_LEFT, KEY_DOWN, + KEY_UP, KEY_NUMLOCK, KEY_KPSLASH, KEY_KPASTERISK, KEY_KPMINUS, + KEY_KPPLUS, KEY_KPENTER, KEY_KP1, KEY_KP2, KEY_KP3, KEY_KP4, KEY_KP5, + KEY_KP6, KEY_KP7, KEY_KP8, KEY_KP9, KEY_KP0, KEY_KPDOT, KEY_102ND, + KEY_COMPOSE, KEY_POWER, KEY_KPEQUAL, KEY_F13, KEY_F14, KEY_F15, + KEY_F16, KEY_F17, KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22, + KEY_F23, KEY_F24, KEY_OPEN, KEY_HELP, KEY_PROPS, KEY_FRONT, KEY_STOP, + KEY_AGAIN, KEY_UNDO, KEY_CUT, KEY_COPY, KEY_PASTE, KEY_FIND, KEY_MUTE, + KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_KPCOMMA, KEY_RESERVED, KEY_RO, KEY_KATAKANAHIRAGANA , KEY_YEN, + KEY_HENKAN, KEY_MUHENKAN, KEY_KPJPCOMMA, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_HANGEUL, KEY_HANJA, KEY_KATAKANA, KEY_HIRAGANA, + KEY_ZENKAKUHANKAKU, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_LEFTCTRL, KEY_LEFTSHIFT, KEY_LEFTALT, + KEY_LEFTMETA, KEY_RIGHTCTRL, KEY_RIGHTSHIFT, KEY_RIGHTALT, + KEY_RIGHTMETA, KEY_PLAYPAUSE, KEY_STOPCD, KEY_PREVIOUSSONG, + KEY_NEXTSONG, KEY_EJECTCD, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE, + KEY_WWW, KEY_BACK, KEY_FORWARD, KEY_STOP, KEY_FIND, KEY_SCROLLUP, + KEY_SCROLLDOWN, KEY_EDIT, KEY_SLEEP, KEY_SCREENLOCK, KEY_REFRESH, + KEY_CALC, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED }; static void dc_scan_kbd(struct dc_kbd *kbd) @@ -151,14 +163,15 @@ static int dc_kbd_connect(struct maple_device *mdev) struct dc_kbd *kbd; struct input_dev *dev; - if (!(mdev->function & MAPLE_FUNC_KEYBOARD)) - return -EINVAL; - kbd = kzalloc(sizeof(struct dc_kbd), GFP_KERNEL); + if (!kbd) { + error = -ENOMEM; + goto fail_kbd; + } dev = input_allocate_device(); - if (!kbd || !dev) { + if (!dev) { error = -ENOMEM; - goto fail; + goto fail_dev; } mdev->private_data = kbd; @@ -169,7 +182,7 @@ static int dc_kbd_connect(struct maple_device *mdev) dev->name = mdev->product_name; dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); dev->keycode = kbd->keycode; - dev->keycodesize = sizeof (unsigned short); + dev->keycodesize = sizeof(unsigned short); dev->keycodemax = ARRAY_SIZE(kbd->keycode); dev->id.bustype = BUS_HOST; dev->dev.parent = &mdev->dev; @@ -186,12 +199,15 @@ static int dc_kbd_connect(struct maple_device *mdev) goto fail; /* Maple polling is locked to VBLANK - which may be just 50/s */ - maple_getcond_callback(mdev, dc_kbd_callback, HZ/50, MAPLE_FUNC_KEYBOARD); + maple_getcond_callback(mdev, dc_kbd_callback, HZ/50, + MAPLE_FUNC_KEYBOARD); return 0; - fail: +fail: input_free_device(dev); +fail_dev: kfree(kbd); +fail_kbd: mdev->private_data = NULL; return error; } @@ -201,7 +217,7 @@ static void dc_kbd_disconnect(struct maple_device *mdev) struct dc_kbd *kbd; mutex_lock(&maple_keyb_mutex); - + mdev->callback = NULL; kbd = mdev->private_data; mdev->private_data = NULL; input_unregister_device(kbd->dev); @@ -222,11 +238,18 @@ static int probe_maple_kbd(struct device *dev) return error; mdev->driver = mdrv; - mdev->registered = 1; return 0; } +static int remove_maple_kbd(struct device *dev) +{ + struct maple_device *mdev = to_maple_dev(dev); + + dc_kbd_disconnect(mdev); + return 0; +} + static struct maple_driver dc_kbd_driver = { .function = MAPLE_FUNC_KEYBOARD, .connect = dc_kbd_connect, @@ -234,9 +257,23 @@ static struct maple_driver dc_kbd_driver = { .drv = { .name = "Dreamcast_keyboard", .probe = probe_maple_kbd, + .remove = remove_maple_kbd, }, }; +static int unplug_maple_keyb(struct device *dev, void *ignored) +{ + /* Please DO NOT really unplug your keyboard */ + struct maple_device *mdev; + + mdev = to_maple_dev(dev); + if ((mdev->function & MAPLE_FUNC_KEYBOARD) + && (mdev->driver == &dc_kbd_driver)) + remove_maple_kbd(dev); + + return 0; +} + static int __init dc_kbd_init(void) { return maple_driver_register(&dc_kbd_driver.drv); @@ -244,6 +281,7 @@ static int __init dc_kbd_init(void) static void __exit dc_kbd_exit(void) { + bus_for_each_dev(&maple_bus_type, NULL, NULL, unplug_maple_keyb); driver_unregister(&dc_kbd_driver.drv); } -- cgit v1.2.3 From 459021fe3627083ea6678a7b29f9f74accf9c6fd Mon Sep 17 00:00:00 2001 From: Adrian McMenamin Date: Mon, 4 Aug 2008 10:09:03 +0900 Subject: input: Clean up maple keyboard driver Have a single probe function instead of a probe and a connect function. Also tidy a comment. Signed-off-by: Adrian McMenamin Signed-off-by: Paul Mundt --- drivers/input/keyboard/maple_keyb.c | 101 ++++++++++++------------------------ 1 file changed, 32 insertions(+), 69 deletions(-) diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c index 7d13f55b504e..42f5d4ec39ab 100644 --- a/drivers/input/keyboard/maple_keyb.c +++ b/drivers/input/keyboard/maple_keyb.c @@ -143,8 +143,8 @@ static void dc_kbd_callback(struct mapleq *mq) unsigned long *buf = mq->recvbuf; /* - * We should always be getting the lock because the only - * time it may be locked if driver is in cleanup phase. + * We should always get the lock because the only + * time it may be locked is if the driver is in the cleanup phase. */ if (likely(mutex_trylock(&maple_keyb_mutex))) { @@ -157,103 +157,80 @@ static void dc_kbd_callback(struct mapleq *mq) } } -static int dc_kbd_connect(struct maple_device *mdev) +static int probe_maple_kbd(struct device *dev) { + struct maple_device *mdev = to_maple_dev(dev); + struct maple_driver *mdrv = to_maple_driver(dev->driver); int i, error; struct dc_kbd *kbd; - struct input_dev *dev; + struct input_dev *idev; + + if (!(mdev->function & MAPLE_FUNC_KEYBOARD)) + return -EINVAL; kbd = kzalloc(sizeof(struct dc_kbd), GFP_KERNEL); - if (!kbd) { + idev = input_allocate_device(); + if (!kbd || !idev) { error = -ENOMEM; - goto fail_kbd; - } - dev = input_allocate_device(); - if (!dev) { - error = -ENOMEM; - goto fail_dev; + goto fail; } mdev->private_data = kbd; - kbd->dev = dev; + kbd->dev = idev; memcpy(kbd->keycode, dc_kbd_keycode, sizeof(kbd->keycode)); - dev->name = mdev->product_name; - dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - dev->keycode = kbd->keycode; - dev->keycodesize = sizeof(unsigned short); - dev->keycodemax = ARRAY_SIZE(kbd->keycode); - dev->id.bustype = BUS_HOST; - dev->dev.parent = &mdev->dev; + idev->name = mdev->product_name; + idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + idev->keycode = kbd->keycode; + idev->keycodesize = sizeof(unsigned short); + idev->keycodemax = ARRAY_SIZE(kbd->keycode); + idev->id.bustype = BUS_HOST; + idev->dev.parent = &mdev->dev; for (i = 0; i < NR_SCANCODES; i++) - __set_bit(dc_kbd_keycode[i], dev->keybit); - __clear_bit(KEY_RESERVED, dev->keybit); + __set_bit(dc_kbd_keycode[i], idev->keybit); + __clear_bit(KEY_RESERVED, idev->keybit); - input_set_capability(dev, EV_MSC, MSC_SCAN); - input_set_drvdata(dev, kbd); + input_set_capability(idev, EV_MSC, MSC_SCAN); + input_set_drvdata(idev, kbd); - error = input_register_device(dev); + error = input_register_device(idev); if (error) goto fail; /* Maple polling is locked to VBLANK - which may be just 50/s */ maple_getcond_callback(mdev, dc_kbd_callback, HZ/50, MAPLE_FUNC_KEYBOARD); - return 0; + + mdev->driver = mdrv; + return error; fail: - input_free_device(dev); -fail_dev: + input_free_device(idev); kfree(kbd); -fail_kbd: mdev->private_data = NULL; return error; } -static void dc_kbd_disconnect(struct maple_device *mdev) +static int remove_maple_kbd(struct device *dev) { + struct maple_device *mdev = to_maple_dev(dev); struct dc_kbd *kbd; mutex_lock(&maple_keyb_mutex); - mdev->callback = NULL; + kbd = mdev->private_data; mdev->private_data = NULL; input_unregister_device(kbd->dev); kfree(kbd); mutex_unlock(&maple_keyb_mutex); -} - -/* allow the keyboard to be used */ -static int probe_maple_kbd(struct device *dev) -{ - struct maple_device *mdev = to_maple_dev(dev); - struct maple_driver *mdrv = to_maple_driver(dev->driver); - int error; - - error = dc_kbd_connect(mdev); - if (error) - return error; - - mdev->driver = mdrv; - - return 0; -} - -static int remove_maple_kbd(struct device *dev) -{ - struct maple_device *mdev = to_maple_dev(dev); - - dc_kbd_disconnect(mdev); return 0; } static struct maple_driver dc_kbd_driver = { .function = MAPLE_FUNC_KEYBOARD, - .connect = dc_kbd_connect, - .disconnect = dc_kbd_disconnect, .drv = { .name = "Dreamcast_keyboard", .probe = probe_maple_kbd, @@ -261,19 +238,6 @@ static struct maple_driver dc_kbd_driver = { }, }; -static int unplug_maple_keyb(struct device *dev, void *ignored) -{ - /* Please DO NOT really unplug your keyboard */ - struct maple_device *mdev; - - mdev = to_maple_dev(dev); - if ((mdev->function & MAPLE_FUNC_KEYBOARD) - && (mdev->driver == &dc_kbd_driver)) - remove_maple_kbd(dev); - - return 0; -} - static int __init dc_kbd_init(void) { return maple_driver_register(&dc_kbd_driver.drv); @@ -281,7 +245,6 @@ static int __init dc_kbd_init(void) static void __exit dc_kbd_exit(void) { - bus_for_each_dev(&maple_bus_type, NULL, NULL, unplug_maple_keyb); driver_unregister(&dc_kbd_driver.drv); } -- cgit v1.2.3 From 1730554f253deb65fe5112c54b2f898d5318a328 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Sun, 3 Aug 2008 18:13:44 -0700 Subject: ipv6: syncookies: free reqsk on xfrm_lookup error cookie_v6_check() did not call reqsk_free() if xfrm_lookup() fails, leaking the request sock. Signed-off-by: Florian Westphal Signed-off-by: David S. Miller --- net/ipv6/syncookies.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c index a46badd1082d..ec394cf5a19b 100644 --- a/net/ipv6/syncookies.c +++ b/net/ipv6/syncookies.c @@ -199,10 +199,8 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb) ireq6 = inet6_rsk(req); treq = tcp_rsk(req); - if (security_inet_conn_request(sk, skb, req)) { - reqsk_free(req); - goto out; - } + if (security_inet_conn_request(sk, skb, req)) + goto out_free; req->mss = mss; ireq->rmt_port = th->source; @@ -255,14 +253,13 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb) fl.fl_ip_dport = inet_rsk(req)->rmt_port; fl.fl_ip_sport = inet_sk(sk)->sport; security_req_classify_flow(req, &fl); - if (ip6_dst_lookup(sk, &dst, &fl)) { - reqsk_free(req); - goto out; - } + if (ip6_dst_lookup(sk, &dst, &fl)) + goto out_free; + if (final_p) ipv6_addr_copy(&fl.fl6_dst, final_p); if ((xfrm_lookup(&dst, &fl, sk, 0)) < 0) - goto out; + goto out_free; } req->window_clamp = tp->window_clamp ? :dst_metric(dst, RTAX_WINDOW); @@ -273,7 +270,10 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb) ireq->rcv_wscale = rcv_wscale; ret = get_cookie_sock(sk, skb, req, dst); - -out: return ret; +out: + return ret; +out_free: + reqsk_free(req); + return NULL; } -- cgit v1.2.3 From cfb266c0ee0ea0b7bfa8189e3a3a80344dec6112 Mon Sep 17 00:00:00 2001 From: Yang Hongyang Date: Sun, 3 Aug 2008 18:16:15 -0700 Subject: ipv6: Fix the return value of Set Hop-by-Hop options header with NULL data pointer When Set Hop-by-Hop options header with NULL data pointer and optlen is not zero use setsockopt(), the kernel successfully return 0 instead of return error EINVAL or EFAULT. This patch fix the problem. Signed-off-by: Yang Hongyang Signed-off-by: David S. Miller --- net/ipv6/ipv6_sockglue.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index ea33b26512c2..741cfcd96f88 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -346,6 +346,8 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, */ if (optlen == 0) optval = NULL; + else if (optval == NULL) + goto e_inval; else if (optlen < sizeof(struct ipv6_opt_hdr) || optlen & 0x7 || optlen > 8 * 255) goto e_inval; -- cgit v1.2.3 From 63870295de9adb365cd121dab94379b8cfdf986a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 10:39:46 +0900 Subject: maple: Clean up maple_driver_register/unregister routines. These were completely inconsistent. Clean these up to take a maple_driver pointer directly for consistency. Signed-off-by: Paul Mundt --- drivers/input/keyboard/maple_keyb.c | 6 +++--- drivers/sh/maple/maple.c | 37 ++++++++++++++++++++++++++----------- include/linux/maple.h | 4 +++- 3 files changed, 32 insertions(+), 15 deletions(-) diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c index 42f5d4ec39ab..3f5151a0fd15 100644 --- a/drivers/input/keyboard/maple_keyb.c +++ b/drivers/input/keyboard/maple_keyb.c @@ -235,17 +235,17 @@ static struct maple_driver dc_kbd_driver = { .name = "Dreamcast_keyboard", .probe = probe_maple_kbd, .remove = remove_maple_kbd, - }, + }, }; static int __init dc_kbd_init(void) { - return maple_driver_register(&dc_kbd_driver.drv); + return maple_driver_register(&dc_kbd_driver); } static void __exit dc_kbd_exit(void) { - driver_unregister(&dc_kbd_driver.drv); + maple_driver_unregister(&dc_kbd_driver); } module_init(dc_kbd_init); diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c index be97789fa5fd..a6b4dc3cfcba 100644 --- a/drivers/sh/maple/maple.c +++ b/drivers/sh/maple/maple.c @@ -2,6 +2,7 @@ * Core maple bus functionality * * Copyright (C) 2007, 2008 Adrian McMenamin + * Copyright (C) 2001 - 2008 Paul Mundt * * Based on 2.4 code by: * @@ -31,7 +32,7 @@ #include #include -MODULE_AUTHOR("Yaegshi Takeshi, Paul Mundt, M.R. Brown, Adrian McMenamin"); +MODULE_AUTHOR("Yaegashi Takeshi, Paul Mundt, M. R. Brown, Adrian McMenamin"); MODULE_DESCRIPTION("Maple bus driver for Dreamcast"); MODULE_LICENSE("GPL v2"); MODULE_SUPPORTED_DEVICE("{{SEGA, Dreamcast/Maple}}"); @@ -65,19 +66,35 @@ static bool checked[4]; static struct maple_device *baseunits[4]; /** - * maple_driver_register - register a device driver - * automatically makes the driver bus a maple bus - * @drv: the driver to be registered + * maple_driver_register - register a maple driver + * @drv: maple driver to be registered. + * + * Registers the passed in @drv, while updating the bus type. + * Devices with matching function IDs will be automatically probed. */ -int maple_driver_register(struct device_driver *drv) +int maple_driver_register(struct maple_driver *drv) { if (!drv) return -EINVAL; - drv->bus = &maple_bus_type; - return driver_register(drv); + + drv->drv.bus = &maple_bus_type; + + return driver_register(&drv->drv); } EXPORT_SYMBOL_GPL(maple_driver_register); +/** + * maple_driver_unregister - unregister a maple driver. + * @drv: maple driver to unregister. + * + * Cleans up after maple_driver_register(). To be invoked in the exit + * path of any module drivers. + */ +void maple_driver_unregister(struct maple_driver *drv) +{ + driver_unregister(&drv->drv); +} + /* set hardware registers to enable next round of dma */ static void maplebus_dma_reset(void) { @@ -724,11 +741,9 @@ static int maple_get_dma_buffer(void) static int match_maple_bus_driver(struct device *devptr, struct device_driver *drvptr) { - struct maple_driver *maple_drv; - struct maple_device *maple_dev; + struct maple_driver *maple_drv = to_maple_driver(drvptr); + struct maple_device *maple_dev = to_maple_dev(devptr); - maple_drv = container_of(drvptr, struct maple_driver, drv); - maple_dev = container_of(devptr, struct maple_device, dev); /* Trap empty port case */ if (maple_dev->devinfo.function == 0xFFFFFFFF) return 0; diff --git a/include/linux/maple.h b/include/linux/maple.h index c853b1066018..b2b7ce0fb1f7 100644 --- a/include/linux/maple.h +++ b/include/linux/maple.h @@ -70,7 +70,9 @@ void maple_getcond_callback(struct maple_device *dev, void (*callback) (struct mapleq * mq), unsigned long interval, unsigned long function); -int maple_driver_register(struct device_driver *drv); +int maple_driver_register(struct maple_driver *); +void maple_driver_unregister(struct maple_driver *); + int maple_add_packet_sleeps(struct maple_device *mdev, u32 function, u32 command, u32 length, void *data); void maple_clear_dev(struct maple_device *mdev); -- cgit v1.2.3 From 617870632de6739fca0893f3e6648e9ae1bd0ddb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 10:58:24 +0900 Subject: maple: Kill useless private_data pointer. We can simply wrap in to the dev_set/get_drvdata(), there's no reason to track an extra level of private data on top of the struct device. Signed-off-by: Paul Mundt --- drivers/input/keyboard/maple_keyb.c | 15 ++++++++------- drivers/sh/maple/maple.c | 1 + include/linux/maple.h | 4 +++- 3 files changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c index 3f5151a0fd15..22f17a593be7 100644 --- a/drivers/input/keyboard/maple_keyb.c +++ b/drivers/input/keyboard/maple_keyb.c @@ -139,7 +139,7 @@ static void dc_scan_kbd(struct dc_kbd *kbd) static void dc_kbd_callback(struct mapleq *mq) { struct maple_device *mapledev = mq->dev; - struct dc_kbd *kbd = mapledev->private_data; + struct dc_kbd *kbd = maple_get_drvdata(mapledev); unsigned long *buf = mq->recvbuf; /* @@ -175,8 +175,6 @@ static int probe_maple_kbd(struct device *dev) goto fail; } - mdev->private_data = kbd; - kbd->dev = idev; memcpy(kbd->keycode, dc_kbd_keycode, sizeof(kbd->keycode)); @@ -204,27 +202,30 @@ static int probe_maple_kbd(struct device *dev) MAPLE_FUNC_KEYBOARD); mdev->driver = mdrv; + + maple_set_drvdata(mdev, kbd); + return error; fail: input_free_device(idev); kfree(kbd); - mdev->private_data = NULL; + maple_set_drvdata(mdev, NULL); return error; } static int remove_maple_kbd(struct device *dev) { struct maple_device *mdev = to_maple_dev(dev); - struct dc_kbd *kbd; + struct dc_kbd *kbd = maple_get_drvdata(mdev); mutex_lock(&maple_keyb_mutex); - kbd = mdev->private_data; - mdev->private_data = NULL; input_unregister_device(kbd->dev); kfree(kbd); + maple_set_drvdata(mdev, NULL); + mutex_unlock(&maple_keyb_mutex); return 0; } diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c index a6b4dc3cfcba..be77a39f224c 100644 --- a/drivers/sh/maple/maple.c +++ b/drivers/sh/maple/maple.c @@ -94,6 +94,7 @@ void maple_driver_unregister(struct maple_driver *drv) { driver_unregister(&drv->drv); } +EXPORT_SYMBOL_GPL(maple_driver_unregister); /* set hardware registers to enable next round of dma */ static void maplebus_dma_reset(void) diff --git a/include/linux/maple.h b/include/linux/maple.h index b2b7ce0fb1f7..c23d3f51ba40 100644 --- a/include/linux/maple.h +++ b/include/linux/maple.h @@ -51,7 +51,6 @@ struct maple_devinfo { struct maple_device { struct maple_driver *driver; struct mapleq *mq; - void *private_data; void (*callback) (struct mapleq * mq); unsigned long when, interval, function; struct maple_devinfo devinfo; @@ -80,4 +79,7 @@ void maple_clear_dev(struct maple_device *mdev); #define to_maple_dev(n) container_of(n, struct maple_device, dev) #define to_maple_driver(n) container_of(n, struct maple_driver, drv) +#define maple_get_drvdata(d) dev_get_drvdata(&(d)->dev) +#define maple_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, (p)) + #endif /* __LINUX_MAPLE_H */ -- cgit v1.2.3 From b8b572e1015f81b4e748417be2629dfe51ab99f9 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 1 Aug 2008 15:20:30 +1000 Subject: powerpc: Move include files to arch/powerpc/include/asm from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- Documentation/powerpc/booting-without-of.txt | 4 +- Documentation/powerpc/eeh-pci-error-recovery.txt | 2 +- arch/powerpc/boot/io.h | 2 +- arch/powerpc/include/asm/8253pit.h | 10 + arch/powerpc/include/asm/8xx_immap.h | 564 ++++++++++ arch/powerpc/include/asm/Kbuild | 37 + arch/powerpc/include/asm/a.out.h | 20 + arch/powerpc/include/asm/abs_addr.h | 75 ++ arch/powerpc/include/asm/agp.h | 22 + arch/powerpc/include/asm/asm-compat.h | 69 ++ arch/powerpc/include/asm/atomic.h | 479 +++++++++ arch/powerpc/include/asm/auxvec.h | 19 + arch/powerpc/include/asm/backlight.h | 41 + arch/powerpc/include/asm/bitops.h | 410 ++++++++ arch/powerpc/include/asm/bootx.h | 171 ++++ arch/powerpc/include/asm/btext.h | 28 + arch/powerpc/include/asm/bug.h | 121 +++ arch/powerpc/include/asm/bugs.h | 18 + arch/powerpc/include/asm/byteorder.h | 89 ++ arch/powerpc/include/asm/cache.h | 45 + arch/powerpc/include/asm/cacheflush.h | 75 ++ arch/powerpc/include/asm/cell-pmu.h | 105 ++ arch/powerpc/include/asm/cell-regs.h | 315 ++++++ arch/powerpc/include/asm/checksum.h | 117 +++ arch/powerpc/include/asm/clk_interface.h | 20 + arch/powerpc/include/asm/code-patching.h | 54 + arch/powerpc/include/asm/compat.h | 214 ++++ arch/powerpc/include/asm/cpm.h | 106 ++ arch/powerpc/include/asm/cpm1.h | 652 ++++++++++++ arch/powerpc/include/asm/cpm2.h | 1195 ++++++++++++++++++++++ arch/powerpc/include/asm/cputable.h | 514 ++++++++++ arch/powerpc/include/asm/cputhreads.h | 71 ++ arch/powerpc/include/asm/cputime.h | 235 +++++ arch/powerpc/include/asm/current.h | 40 + arch/powerpc/include/asm/dbdma.h | 108 ++ arch/powerpc/include/asm/dcr-generic.h | 49 + arch/powerpc/include/asm/dcr-mmio.h | 61 ++ arch/powerpc/include/asm/dcr-native.h | 116 +++ arch/powerpc/include/asm/dcr-regs.h | 149 +++ arch/powerpc/include/asm/dcr.h | 82 ++ arch/powerpc/include/asm/delay.h | 34 + arch/powerpc/include/asm/device.h | 24 + arch/powerpc/include/asm/div64.h | 1 + arch/powerpc/include/asm/dma-mapping.h | 474 +++++++++ arch/powerpc/include/asm/dma.h | 360 +++++++ arch/powerpc/include/asm/edac.h | 40 + arch/powerpc/include/asm/eeh.h | 211 ++++ arch/powerpc/include/asm/eeh_event.h | 53 + arch/powerpc/include/asm/elf.h | 424 ++++++++ arch/powerpc/include/asm/emergency-restart.h | 1 + arch/powerpc/include/asm/errno.h | 11 + arch/powerpc/include/asm/exception.h | 311 ++++++ arch/powerpc/include/asm/fb.h | 21 + arch/powerpc/include/asm/fcntl.h | 11 + arch/powerpc/include/asm/feature-fixups.h | 126 +++ arch/powerpc/include/asm/firmware.h | 132 +++ arch/powerpc/include/asm/fixmap.h | 106 ++ arch/powerpc/include/asm/floppy.h | 213 ++++ arch/powerpc/include/asm/fs_pd.h | 50 + arch/powerpc/include/asm/fsl_gtm.h | 47 + arch/powerpc/include/asm/fsl_lbc.h | 311 ++++++ arch/powerpc/include/asm/ftrace.h | 14 + arch/powerpc/include/asm/futex.h | 117 +++ arch/powerpc/include/asm/gpio.h | 56 + arch/powerpc/include/asm/grackle.h | 12 + arch/powerpc/include/asm/hardirq.h | 29 + arch/powerpc/include/asm/heathrow.h | 67 ++ arch/powerpc/include/asm/highmem.h | 138 +++ arch/powerpc/include/asm/hugetlb.h | 75 ++ arch/powerpc/include/asm/hvcall.h | 296 ++++++ arch/powerpc/include/asm/hvconsole.h | 41 + arch/powerpc/include/asm/hvcserver.h | 59 ++ arch/powerpc/include/asm/hw_irq.h | 135 +++ arch/powerpc/include/asm/hydra.h | 102 ++ arch/powerpc/include/asm/i8259.h | 17 + arch/powerpc/include/asm/ibmebus.h | 60 ++ arch/powerpc/include/asm/ide.h | 59 ++ arch/powerpc/include/asm/immap_86xx.h | 156 +++ arch/powerpc/include/asm/immap_cpm2.h | 650 ++++++++++++ arch/powerpc/include/asm/immap_qe.h | 483 +++++++++ arch/powerpc/include/asm/io-defs.h | 60 ++ arch/powerpc/include/asm/io.h | 787 ++++++++++++++ arch/powerpc/include/asm/ioctl.h | 13 + arch/powerpc/include/asm/ioctls.h | 110 ++ arch/powerpc/include/asm/iommu.h | 131 +++ arch/powerpc/include/asm/ipcbuf.h | 34 + arch/powerpc/include/asm/ipic.h | 91 ++ arch/powerpc/include/asm/irq.h | 654 ++++++++++++ arch/powerpc/include/asm/irq_regs.h | 2 + arch/powerpc/include/asm/irqflags.h | 42 + arch/powerpc/include/asm/iseries/alpaca.h | 31 + arch/powerpc/include/asm/iseries/hv_call.h | 111 ++ arch/powerpc/include/asm/iseries/hv_call_event.h | 201 ++++ arch/powerpc/include/asm/iseries/hv_call_sc.h | 50 + arch/powerpc/include/asm/iseries/hv_call_xm.h | 61 ++ arch/powerpc/include/asm/iseries/hv_lp_config.h | 128 +++ arch/powerpc/include/asm/iseries/hv_lp_event.h | 162 +++ arch/powerpc/include/asm/iseries/hv_types.h | 112 ++ arch/powerpc/include/asm/iseries/iommu.h | 41 + arch/powerpc/include/asm/iseries/it_lp_queue.h | 78 ++ arch/powerpc/include/asm/iseries/lpar_map.h | 85 ++ arch/powerpc/include/asm/iseries/mf.h | 51 + arch/powerpc/include/asm/iseries/vio.h | 265 +++++ arch/powerpc/include/asm/kdebug.h | 15 + arch/powerpc/include/asm/kdump.h | 35 + arch/powerpc/include/asm/kexec.h | 160 +++ arch/powerpc/include/asm/keylargo.h | 261 +++++ arch/powerpc/include/asm/kgdb.h | 63 ++ arch/powerpc/include/asm/kmap_types.h | 33 + arch/powerpc/include/asm/kprobes.h | 118 +++ arch/powerpc/include/asm/kvm.h | 55 + arch/powerpc/include/asm/kvm_asm.h | 55 + arch/powerpc/include/asm/kvm_host.h | 155 +++ arch/powerpc/include/asm/kvm_para.h | 37 + arch/powerpc/include/asm/kvm_ppc.h | 95 ++ arch/powerpc/include/asm/libata-portmap.h | 12 + arch/powerpc/include/asm/linkage.h | 6 + arch/powerpc/include/asm/lmb.h | 15 + arch/powerpc/include/asm/local.h | 200 ++++ arch/powerpc/include/asm/lppaca.h | 159 +++ arch/powerpc/include/asm/lv1call.h | 348 +++++++ arch/powerpc/include/asm/machdep.h | 365 +++++++ arch/powerpc/include/asm/macio.h | 142 +++ arch/powerpc/include/asm/mc146818rtc.h | 36 + arch/powerpc/include/asm/mediabay.h | 43 + arch/powerpc/include/asm/mman.h | 63 ++ arch/powerpc/include/asm/mmu-40x.h | 63 ++ arch/powerpc/include/asm/mmu-44x.h | 76 ++ arch/powerpc/include/asm/mmu-8xx.h | 145 +++ arch/powerpc/include/asm/mmu-fsl-booke.h | 82 ++ arch/powerpc/include/asm/mmu-hash32.h | 83 ++ arch/powerpc/include/asm/mmu-hash64.h | 478 +++++++++ arch/powerpc/include/asm/mmu.h | 26 + arch/powerpc/include/asm/mmu_context.h | 280 +++++ arch/powerpc/include/asm/mmzone.h | 47 + arch/powerpc/include/asm/module.h | 77 ++ arch/powerpc/include/asm/mpc512x.h | 22 + arch/powerpc/include/asm/mpc52xx.h | 295 ++++++ arch/powerpc/include/asm/mpc52xx_psc.h | 276 +++++ arch/powerpc/include/asm/mpc6xx.h | 6 + arch/powerpc/include/asm/mpc8260.h | 25 + arch/powerpc/include/asm/mpc86xx.h | 33 + arch/powerpc/include/asm/mpc8xx.h | 12 + arch/powerpc/include/asm/mpic.h | 481 +++++++++ arch/powerpc/include/asm/msgbuf.h | 33 + arch/powerpc/include/asm/mutex.h | 9 + arch/powerpc/include/asm/nvram.h | 139 +++ arch/powerpc/include/asm/of_device.h | 31 + arch/powerpc/include/asm/of_platform.h | 42 + arch/powerpc/include/asm/ohare.h | 54 + arch/powerpc/include/asm/oprofile_impl.h | 134 +++ arch/powerpc/include/asm/pSeries_reconfig.h | 29 + arch/powerpc/include/asm/paca.h | 112 ++ arch/powerpc/include/asm/page.h | 225 ++++ arch/powerpc/include/asm/page_32.h | 38 + arch/powerpc/include/asm/page_64.h | 185 ++++ arch/powerpc/include/asm/param.h | 22 + arch/powerpc/include/asm/parport.h | 39 + arch/powerpc/include/asm/pasemi_dma.h | 538 ++++++++++ arch/powerpc/include/asm/pci-bridge.h | 302 ++++++ arch/powerpc/include/asm/pci.h | 228 +++++ arch/powerpc/include/asm/percpu.h | 24 + arch/powerpc/include/asm/pgalloc-32.h | 43 + arch/powerpc/include/asm/pgalloc-64.h | 166 +++ arch/powerpc/include/asm/pgalloc.h | 12 + arch/powerpc/include/asm/pgtable-4k.h | 117 +++ arch/powerpc/include/asm/pgtable-64k.h | 155 +++ arch/powerpc/include/asm/pgtable-ppc32.h | 802 +++++++++++++++ arch/powerpc/include/asm/pgtable-ppc64.h | 468 +++++++++ arch/powerpc/include/asm/pgtable.h | 57 ++ arch/powerpc/include/asm/phyp_dump.h | 47 + arch/powerpc/include/asm/pmac_feature.h | 405 ++++++++ arch/powerpc/include/asm/pmac_low_i2c.h | 107 ++ arch/powerpc/include/asm/pmac_pfunc.h | 252 +++++ arch/powerpc/include/asm/pmc.h | 37 + arch/powerpc/include/asm/pmi.h | 66 ++ arch/powerpc/include/asm/poll.h | 1 + arch/powerpc/include/asm/posix_types.h | 128 +++ arch/powerpc/include/asm/ppc-pci.h | 149 +++ arch/powerpc/include/asm/ppc4xx.h | 18 + arch/powerpc/include/asm/ppc_asm.h | 689 +++++++++++++ arch/powerpc/include/asm/processor.h | 314 ++++++ arch/powerpc/include/asm/prom.h | 356 +++++++ arch/powerpc/include/asm/ps3.h | 519 ++++++++++ arch/powerpc/include/asm/ps3av.h | 744 ++++++++++++++ arch/powerpc/include/asm/ps3fb.h | 44 + arch/powerpc/include/asm/ps3stor.h | 71 ++ arch/powerpc/include/asm/ptrace.h | 293 ++++++ arch/powerpc/include/asm/qe.h | 642 ++++++++++++ arch/powerpc/include/asm/qe_ic.h | 128 +++ arch/powerpc/include/asm/reg.h | 788 ++++++++++++++ arch/powerpc/include/asm/reg_8xx.h | 42 + arch/powerpc/include/asm/reg_booke.h | 501 +++++++++ arch/powerpc/include/asm/reg_fsl_emb.h | 72 ++ arch/powerpc/include/asm/resource.h | 1 + arch/powerpc/include/asm/rheap.h | 89 ++ arch/powerpc/include/asm/rio.h | 18 + arch/powerpc/include/asm/rtas.h | 247 +++++ arch/powerpc/include/asm/rtc.h | 78 ++ arch/powerpc/include/asm/rwsem.h | 173 ++++ arch/powerpc/include/asm/scatterlist.h | 50 + arch/powerpc/include/asm/seccomp.h | 20 + arch/powerpc/include/asm/sections.h | 22 + arch/powerpc/include/asm/sembuf.h | 36 + arch/powerpc/include/asm/serial.h | 24 + arch/powerpc/include/asm/setjmp.h | 18 + arch/powerpc/include/asm/setup.h | 6 + arch/powerpc/include/asm/shmbuf.h | 59 ++ arch/powerpc/include/asm/shmparam.h | 6 + arch/powerpc/include/asm/sigcontext.h | 87 ++ arch/powerpc/include/asm/siginfo.h | 26 + arch/powerpc/include/asm/signal.h | 150 +++ arch/powerpc/include/asm/smp.h | 127 +++ arch/powerpc/include/asm/smu.h | 700 +++++++++++++ arch/powerpc/include/asm/socket.h | 64 ++ arch/powerpc/include/asm/sockios.h | 20 + arch/powerpc/include/asm/sparsemem.h | 32 + arch/powerpc/include/asm/spinlock.h | 295 ++++++ arch/powerpc/include/asm/spinlock_types.h | 20 + arch/powerpc/include/asm/spu.h | 732 +++++++++++++ arch/powerpc/include/asm/spu_csa.h | 266 +++++ arch/powerpc/include/asm/spu_info.h | 54 + arch/powerpc/include/asm/spu_priv1.h | 236 +++++ arch/powerpc/include/asm/sstep.h | 27 + arch/powerpc/include/asm/stat.h | 81 ++ arch/powerpc/include/asm/statfs.h | 60 ++ arch/powerpc/include/asm/string.h | 32 + arch/powerpc/include/asm/suspend.h | 9 + arch/powerpc/include/asm/synch.h | 44 + arch/powerpc/include/asm/syscall.h | 84 ++ arch/powerpc/include/asm/syscalls.h | 52 + arch/powerpc/include/asm/systbl.h | 324 ++++++ arch/powerpc/include/asm/system.h | 548 ++++++++++ arch/powerpc/include/asm/tce.h | 50 + arch/powerpc/include/asm/termbits.h | 209 ++++ arch/powerpc/include/asm/termios.h | 85 ++ arch/powerpc/include/asm/thread_info.h | 161 +++ arch/powerpc/include/asm/time.h | 255 +++++ arch/powerpc/include/asm/timex.h | 50 + arch/powerpc/include/asm/tlb.h | 81 ++ arch/powerpc/include/asm/tlbflush.h | 166 +++ arch/powerpc/include/asm/topology.h | 117 +++ arch/powerpc/include/asm/tsi108.h | 121 +++ arch/powerpc/include/asm/tsi108_irq.h | 124 +++ arch/powerpc/include/asm/tsi108_pci.h | 45 + arch/powerpc/include/asm/types.h | 75 ++ arch/powerpc/include/asm/uaccess.h | 496 +++++++++ arch/powerpc/include/asm/ucc.h | 64 ++ arch/powerpc/include/asm/ucc_fast.h | 244 +++++ arch/powerpc/include/asm/ucc_slow.h | 290 ++++++ arch/powerpc/include/asm/ucontext.h | 40 + arch/powerpc/include/asm/udbg.h | 55 + arch/powerpc/include/asm/uic.h | 21 + arch/powerpc/include/asm/unaligned.h | 16 + arch/powerpc/include/asm/uninorth.h | 229 +++++ arch/powerpc/include/asm/unistd.h | 398 +++++++ arch/powerpc/include/asm/user.h | 51 + arch/powerpc/include/asm/vdso.h | 78 ++ arch/powerpc/include/asm/vdso_datapage.h | 121 +++ arch/powerpc/include/asm/vga.h | 53 + arch/powerpc/include/asm/vio.h | 118 +++ arch/powerpc/include/asm/xilinx_intc.h | 20 + arch/powerpc/include/asm/xmon.h | 33 + arch/powerpc/include/asm/xor.h | 1 + arch/powerpc/mm/tlb_64.c | 2 +- arch/powerpc/platforms/86xx/mpc86xx_smp.c | 2 +- drivers/char/hvc_console.h | 2 +- drivers/char/hvcs.c | 2 +- drivers/infiniband/hw/ehca/ehca_reqs.c | 2 +- include/asm-powerpc/8253pit.h | 10 - include/asm-powerpc/8xx_immap.h | 564 ---------- include/asm-powerpc/Kbuild | 37 - include/asm-powerpc/a.out.h | 20 - include/asm-powerpc/abs_addr.h | 75 -- include/asm-powerpc/agp.h | 22 - include/asm-powerpc/asm-compat.h | 69 -- include/asm-powerpc/atomic.h | 479 --------- include/asm-powerpc/auxvec.h | 19 - include/asm-powerpc/backlight.h | 41 - include/asm-powerpc/bitops.h | 410 -------- include/asm-powerpc/bootx.h | 171 ---- include/asm-powerpc/btext.h | 28 - include/asm-powerpc/bug.h | 121 --- include/asm-powerpc/bugs.h | 18 - include/asm-powerpc/byteorder.h | 89 -- include/asm-powerpc/cache.h | 45 - include/asm-powerpc/cacheflush.h | 75 -- include/asm-powerpc/cell-pmu.h | 105 -- include/asm-powerpc/cell-regs.h | 315 ------ include/asm-powerpc/checksum.h | 117 --- include/asm-powerpc/clk_interface.h | 20 - include/asm-powerpc/code-patching.h | 54 - include/asm-powerpc/compat.h | 214 ---- include/asm-powerpc/cpm.h | 106 -- include/asm-powerpc/cpm1.h | 652 ------------ include/asm-powerpc/cpm2.h | 1195 ---------------------- include/asm-powerpc/cputable.h | 514 ---------- include/asm-powerpc/cputhreads.h | 71 -- include/asm-powerpc/cputime.h | 235 ----- include/asm-powerpc/current.h | 40 - include/asm-powerpc/dbdma.h | 108 -- include/asm-powerpc/dcr-generic.h | 49 - include/asm-powerpc/dcr-mmio.h | 61 -- include/asm-powerpc/dcr-native.h | 116 --- include/asm-powerpc/dcr-regs.h | 149 --- include/asm-powerpc/dcr.h | 82 -- include/asm-powerpc/delay.h | 34 - include/asm-powerpc/device.h | 24 - include/asm-powerpc/div64.h | 1 - include/asm-powerpc/dma-mapping.h | 474 --------- include/asm-powerpc/dma.h | 360 ------- include/asm-powerpc/edac.h | 40 - include/asm-powerpc/eeh.h | 211 ---- include/asm-powerpc/eeh_event.h | 53 - include/asm-powerpc/elf.h | 424 -------- include/asm-powerpc/emergency-restart.h | 1 - include/asm-powerpc/errno.h | 11 - include/asm-powerpc/exception.h | 311 ------ include/asm-powerpc/fb.h | 21 - include/asm-powerpc/fcntl.h | 11 - include/asm-powerpc/feature-fixups.h | 126 --- include/asm-powerpc/firmware.h | 132 --- include/asm-powerpc/fixmap.h | 106 -- include/asm-powerpc/floppy.h | 213 ---- include/asm-powerpc/fs_pd.h | 50 - include/asm-powerpc/fsl_gtm.h | 47 - include/asm-powerpc/fsl_lbc.h | 311 ------ include/asm-powerpc/ftrace.h | 14 - include/asm-powerpc/futex.h | 117 --- include/asm-powerpc/gpio.h | 56 - include/asm-powerpc/grackle.h | 12 - include/asm-powerpc/hardirq.h | 29 - include/asm-powerpc/heathrow.h | 67 -- include/asm-powerpc/highmem.h | 138 --- include/asm-powerpc/hugetlb.h | 75 -- include/asm-powerpc/hvcall.h | 296 ------ include/asm-powerpc/hvconsole.h | 41 - include/asm-powerpc/hvcserver.h | 59 -- include/asm-powerpc/hw_irq.h | 135 --- include/asm-powerpc/hydra.h | 102 -- include/asm-powerpc/i8259.h | 17 - include/asm-powerpc/ibmebus.h | 60 -- include/asm-powerpc/ide.h | 59 -- include/asm-powerpc/immap_86xx.h | 156 --- include/asm-powerpc/immap_cpm2.h | 650 ------------ include/asm-powerpc/immap_qe.h | 485 --------- include/asm-powerpc/io-defs.h | 60 -- include/asm-powerpc/io.h | 787 -------------- include/asm-powerpc/ioctl.h | 13 - include/asm-powerpc/ioctls.h | 110 -- include/asm-powerpc/iommu.h | 131 --- include/asm-powerpc/ipcbuf.h | 34 - include/asm-powerpc/ipic.h | 93 -- include/asm-powerpc/irq.h | 654 ------------ include/asm-powerpc/irq_regs.h | 2 - include/asm-powerpc/irqflags.h | 44 - include/asm-powerpc/iseries/alpaca.h | 31 - include/asm-powerpc/iseries/hv_call.h | 111 -- include/asm-powerpc/iseries/hv_call_event.h | 201 ---- include/asm-powerpc/iseries/hv_call_sc.h | 50 - include/asm-powerpc/iseries/hv_call_xm.h | 61 -- include/asm-powerpc/iseries/hv_lp_config.h | 128 --- include/asm-powerpc/iseries/hv_lp_event.h | 162 --- include/asm-powerpc/iseries/hv_types.h | 112 -- include/asm-powerpc/iseries/iommu.h | 41 - include/asm-powerpc/iseries/it_lp_queue.h | 78 -- include/asm-powerpc/iseries/lpar_map.h | 85 -- include/asm-powerpc/iseries/mf.h | 51 - include/asm-powerpc/iseries/vio.h | 265 ----- include/asm-powerpc/kdebug.h | 15 - include/asm-powerpc/kdump.h | 35 - include/asm-powerpc/kexec.h | 160 --- include/asm-powerpc/keylargo.h | 261 ----- include/asm-powerpc/kgdb.h | 65 -- include/asm-powerpc/kmap_types.h | 33 - include/asm-powerpc/kprobes.h | 118 --- include/asm-powerpc/kvm.h | 55 - include/asm-powerpc/kvm_asm.h | 55 - include/asm-powerpc/kvm_host.h | 155 --- include/asm-powerpc/kvm_para.h | 37 - include/asm-powerpc/kvm_ppc.h | 95 -- include/asm-powerpc/libata-portmap.h | 12 - include/asm-powerpc/linkage.h | 6 - include/asm-powerpc/lmb.h | 15 - include/asm-powerpc/local.h | 200 ---- include/asm-powerpc/lppaca.h | 159 --- include/asm-powerpc/lv1call.h | 348 ------- include/asm-powerpc/machdep.h | 365 ------- include/asm-powerpc/macio.h | 142 --- include/asm-powerpc/mc146818rtc.h | 36 - include/asm-powerpc/mediabay.h | 43 - include/asm-powerpc/mman.h | 63 -- include/asm-powerpc/mmu-40x.h | 63 -- include/asm-powerpc/mmu-44x.h | 76 -- include/asm-powerpc/mmu-8xx.h | 145 --- include/asm-powerpc/mmu-fsl-booke.h | 82 -- include/asm-powerpc/mmu-hash32.h | 83 -- include/asm-powerpc/mmu-hash64.h | 478 --------- include/asm-powerpc/mmu.h | 26 - include/asm-powerpc/mmu_context.h | 280 ----- include/asm-powerpc/mmzone.h | 47 - include/asm-powerpc/module.h | 77 -- include/asm-powerpc/mpc512x.h | 22 - include/asm-powerpc/mpc52xx.h | 295 ------ include/asm-powerpc/mpc52xx_psc.h | 276 ----- include/asm-powerpc/mpc6xx.h | 6 - include/asm-powerpc/mpc8260.h | 25 - include/asm-powerpc/mpc86xx.h | 33 - include/asm-powerpc/mpc8xx.h | 12 - include/asm-powerpc/mpic.h | 481 --------- include/asm-powerpc/msgbuf.h | 33 - include/asm-powerpc/mutex.h | 9 - include/asm-powerpc/nvram.h | 139 --- include/asm-powerpc/of_device.h | 31 - include/asm-powerpc/of_platform.h | 42 - include/asm-powerpc/ohare.h | 54 - include/asm-powerpc/oprofile_impl.h | 134 --- include/asm-powerpc/pSeries_reconfig.h | 29 - include/asm-powerpc/paca.h | 114 --- include/asm-powerpc/page.h | 225 ---- include/asm-powerpc/page_32.h | 38 - include/asm-powerpc/page_64.h | 185 ---- include/asm-powerpc/param.h | 22 - include/asm-powerpc/parport.h | 39 - include/asm-powerpc/pasemi_dma.h | 538 ---------- include/asm-powerpc/pci-bridge.h | 302 ------ include/asm-powerpc/pci.h | 228 ----- include/asm-powerpc/percpu.h | 24 - include/asm-powerpc/pgalloc-32.h | 43 - include/asm-powerpc/pgalloc-64.h | 166 --- include/asm-powerpc/pgalloc.h | 12 - include/asm-powerpc/pgtable-4k.h | 117 --- include/asm-powerpc/pgtable-64k.h | 155 --- include/asm-powerpc/pgtable-ppc32.h | 802 --------------- include/asm-powerpc/pgtable-ppc64.h | 468 --------- include/asm-powerpc/pgtable.h | 57 -- include/asm-powerpc/phyp_dump.h | 47 - include/asm-powerpc/pmac_feature.h | 405 -------- include/asm-powerpc/pmac_low_i2c.h | 107 -- include/asm-powerpc/pmac_pfunc.h | 252 ----- include/asm-powerpc/pmc.h | 37 - include/asm-powerpc/pmi.h | 66 -- include/asm-powerpc/poll.h | 1 - include/asm-powerpc/posix_types.h | 128 --- include/asm-powerpc/ppc-pci.h | 149 --- include/asm-powerpc/ppc4xx.h | 18 - include/asm-powerpc/ppc_asm.h | 689 ------------- include/asm-powerpc/processor.h | 314 ------ include/asm-powerpc/prom.h | 356 ------- include/asm-powerpc/ps3.h | 519 ---------- include/asm-powerpc/ps3av.h | 744 -------------- include/asm-powerpc/ps3fb.h | 44 - include/asm-powerpc/ps3stor.h | 71 -- include/asm-powerpc/ptrace.h | 293 ------ include/asm-powerpc/qe.h | 642 ------------ include/asm-powerpc/qe_ic.h | 130 --- include/asm-powerpc/reg.h | 788 -------------- include/asm-powerpc/reg_8xx.h | 42 - include/asm-powerpc/reg_booke.h | 501 --------- include/asm-powerpc/reg_fsl_emb.h | 72 -- include/asm-powerpc/resource.h | 1 - include/asm-powerpc/rheap.h | 89 -- include/asm-powerpc/rio.h | 18 - include/asm-powerpc/rtas.h | 247 ----- include/asm-powerpc/rtc.h | 78 -- include/asm-powerpc/rwsem.h | 173 ---- include/asm-powerpc/scatterlist.h | 50 - include/asm-powerpc/seccomp.h | 20 - include/asm-powerpc/sections.h | 22 - include/asm-powerpc/sembuf.h | 36 - include/asm-powerpc/serial.h | 24 - include/asm-powerpc/setjmp.h | 18 - include/asm-powerpc/setup.h | 6 - include/asm-powerpc/shmbuf.h | 59 -- include/asm-powerpc/shmparam.h | 6 - include/asm-powerpc/sigcontext.h | 87 -- include/asm-powerpc/siginfo.h | 26 - include/asm-powerpc/signal.h | 150 --- include/asm-powerpc/smp.h | 127 --- include/asm-powerpc/smu.h | 700 ------------- include/asm-powerpc/socket.h | 64 -- include/asm-powerpc/sockios.h | 20 - include/asm-powerpc/sparsemem.h | 32 - include/asm-powerpc/spinlock.h | 295 ------ include/asm-powerpc/spinlock_types.h | 20 - include/asm-powerpc/spu.h | 732 ------------- include/asm-powerpc/spu_csa.h | 266 ----- include/asm-powerpc/spu_info.h | 54 - include/asm-powerpc/spu_priv1.h | 236 ----- include/asm-powerpc/sstep.h | 27 - include/asm-powerpc/stat.h | 81 -- include/asm-powerpc/statfs.h | 60 -- include/asm-powerpc/string.h | 32 - include/asm-powerpc/suspend.h | 9 - include/asm-powerpc/synch.h | 44 - include/asm-powerpc/syscall.h | 84 -- include/asm-powerpc/syscalls.h | 52 - include/asm-powerpc/systbl.h | 324 ------ include/asm-powerpc/system.h | 548 ---------- include/asm-powerpc/tce.h | 50 - include/asm-powerpc/termbits.h | 209 ---- include/asm-powerpc/termios.h | 85 -- include/asm-powerpc/thread_info.h | 161 --- include/asm-powerpc/time.h | 255 ----- include/asm-powerpc/timex.h | 50 - include/asm-powerpc/tlb.h | 81 -- include/asm-powerpc/tlbflush.h | 166 --- include/asm-powerpc/topology.h | 117 --- include/asm-powerpc/tsi108.h | 121 --- include/asm-powerpc/tsi108_irq.h | 124 --- include/asm-powerpc/tsi108_pci.h | 45 - include/asm-powerpc/types.h | 75 -- include/asm-powerpc/uaccess.h | 496 --------- include/asm-powerpc/ucc.h | 64 -- include/asm-powerpc/ucc_fast.h | 246 ----- include/asm-powerpc/ucc_slow.h | 290 ------ include/asm-powerpc/ucontext.h | 40 - include/asm-powerpc/udbg.h | 55 - include/asm-powerpc/uic.h | 23 - include/asm-powerpc/unaligned.h | 16 - include/asm-powerpc/uninorth.h | 229 ----- include/asm-powerpc/unistd.h | 398 ------- include/asm-powerpc/user.h | 51 - include/asm-powerpc/vdso.h | 78 -- include/asm-powerpc/vdso_datapage.h | 121 --- include/asm-powerpc/vga.h | 53 - include/asm-powerpc/vio.h | 118 --- include/asm-powerpc/xilinx_intc.h | 20 - include/asm-powerpc/xmon.h | 33 - include/asm-powerpc/xor.h | 1 - 530 files changed, 39511 insertions(+), 39527 deletions(-) create mode 100644 arch/powerpc/include/asm/8253pit.h create mode 100644 arch/powerpc/include/asm/8xx_immap.h create mode 100644 arch/powerpc/include/asm/Kbuild create mode 100644 arch/powerpc/include/asm/a.out.h create mode 100644 arch/powerpc/include/asm/abs_addr.h create mode 100644 arch/powerpc/include/asm/agp.h create mode 100644 arch/powerpc/include/asm/asm-compat.h create mode 100644 arch/powerpc/include/asm/atomic.h create mode 100644 arch/powerpc/include/asm/auxvec.h create mode 100644 arch/powerpc/include/asm/backlight.h create mode 100644 arch/powerpc/include/asm/bitops.h create mode 100644 arch/powerpc/include/asm/bootx.h create mode 100644 arch/powerpc/include/asm/btext.h create mode 100644 arch/powerpc/include/asm/bug.h create mode 100644 arch/powerpc/include/asm/bugs.h create mode 100644 arch/powerpc/include/asm/byteorder.h create mode 100644 arch/powerpc/include/asm/cache.h create mode 100644 arch/powerpc/include/asm/cacheflush.h create mode 100644 arch/powerpc/include/asm/cell-pmu.h create mode 100644 arch/powerpc/include/asm/cell-regs.h create mode 100644 arch/powerpc/include/asm/checksum.h create mode 100644 arch/powerpc/include/asm/clk_interface.h create mode 100644 arch/powerpc/include/asm/code-patching.h create mode 100644 arch/powerpc/include/asm/compat.h create mode 100644 arch/powerpc/include/asm/cpm.h create mode 100644 arch/powerpc/include/asm/cpm1.h create mode 100644 arch/powerpc/include/asm/cpm2.h create mode 100644 arch/powerpc/include/asm/cputable.h create mode 100644 arch/powerpc/include/asm/cputhreads.h create mode 100644 arch/powerpc/include/asm/cputime.h create mode 100644 arch/powerpc/include/asm/current.h create mode 100644 arch/powerpc/include/asm/dbdma.h create mode 100644 arch/powerpc/include/asm/dcr-generic.h create mode 100644 arch/powerpc/include/asm/dcr-mmio.h create mode 100644 arch/powerpc/include/asm/dcr-native.h create mode 100644 arch/powerpc/include/asm/dcr-regs.h create mode 100644 arch/powerpc/include/asm/dcr.h create mode 100644 arch/powerpc/include/asm/delay.h create mode 100644 arch/powerpc/include/asm/device.h create mode 100644 arch/powerpc/include/asm/div64.h create mode 100644 arch/powerpc/include/asm/dma-mapping.h create mode 100644 arch/powerpc/include/asm/dma.h create mode 100644 arch/powerpc/include/asm/edac.h create mode 100644 arch/powerpc/include/asm/eeh.h create mode 100644 arch/powerpc/include/asm/eeh_event.h create mode 100644 arch/powerpc/include/asm/elf.h create mode 100644 arch/powerpc/include/asm/emergency-restart.h create mode 100644 arch/powerpc/include/asm/errno.h create mode 100644 arch/powerpc/include/asm/exception.h create mode 100644 arch/powerpc/include/asm/fb.h create mode 100644 arch/powerpc/include/asm/fcntl.h create mode 100644 arch/powerpc/include/asm/feature-fixups.h create mode 100644 arch/powerpc/include/asm/firmware.h create mode 100644 arch/powerpc/include/asm/fixmap.h create mode 100644 arch/powerpc/include/asm/floppy.h create mode 100644 arch/powerpc/include/asm/fs_pd.h create mode 100644 arch/powerpc/include/asm/fsl_gtm.h create mode 100644 arch/powerpc/include/asm/fsl_lbc.h create mode 100644 arch/powerpc/include/asm/ftrace.h create mode 100644 arch/powerpc/include/asm/futex.h create mode 100644 arch/powerpc/include/asm/gpio.h create mode 100644 arch/powerpc/include/asm/grackle.h create mode 100644 arch/powerpc/include/asm/hardirq.h create mode 100644 arch/powerpc/include/asm/heathrow.h create mode 100644 arch/powerpc/include/asm/highmem.h create mode 100644 arch/powerpc/include/asm/hugetlb.h create mode 100644 arch/powerpc/include/asm/hvcall.h create mode 100644 arch/powerpc/include/asm/hvconsole.h create mode 100644 arch/powerpc/include/asm/hvcserver.h create mode 100644 arch/powerpc/include/asm/hw_irq.h create mode 100644 arch/powerpc/include/asm/hydra.h create mode 100644 arch/powerpc/include/asm/i8259.h create mode 100644 arch/powerpc/include/asm/ibmebus.h create mode 100644 arch/powerpc/include/asm/ide.h create mode 100644 arch/powerpc/include/asm/immap_86xx.h create mode 100644 arch/powerpc/include/asm/immap_cpm2.h create mode 100644 arch/powerpc/include/asm/immap_qe.h create mode 100644 arch/powerpc/include/asm/io-defs.h create mode 100644 arch/powerpc/include/asm/io.h create mode 100644 arch/powerpc/include/asm/ioctl.h create mode 100644 arch/powerpc/include/asm/ioctls.h create mode 100644 arch/powerpc/include/asm/iommu.h create mode 100644 arch/powerpc/include/asm/ipcbuf.h create mode 100644 arch/powerpc/include/asm/ipic.h create mode 100644 arch/powerpc/include/asm/irq.h create mode 100644 arch/powerpc/include/asm/irq_regs.h create mode 100644 arch/powerpc/include/asm/irqflags.h create mode 100644 arch/powerpc/include/asm/iseries/alpaca.h create mode 100644 arch/powerpc/include/asm/iseries/hv_call.h create mode 100644 arch/powerpc/include/asm/iseries/hv_call_event.h create mode 100644 arch/powerpc/include/asm/iseries/hv_call_sc.h create mode 100644 arch/powerpc/include/asm/iseries/hv_call_xm.h create mode 100644 arch/powerpc/include/asm/iseries/hv_lp_config.h create mode 100644 arch/powerpc/include/asm/iseries/hv_lp_event.h create mode 100644 arch/powerpc/include/asm/iseries/hv_types.h create mode 100644 arch/powerpc/include/asm/iseries/iommu.h create mode 100644 arch/powerpc/include/asm/iseries/it_lp_queue.h create mode 100644 arch/powerpc/include/asm/iseries/lpar_map.h create mode 100644 arch/powerpc/include/asm/iseries/mf.h create mode 100644 arch/powerpc/include/asm/iseries/vio.h create mode 100644 arch/powerpc/include/asm/kdebug.h create mode 100644 arch/powerpc/include/asm/kdump.h create mode 100644 arch/powerpc/include/asm/kexec.h create mode 100644 arch/powerpc/include/asm/keylargo.h create mode 100644 arch/powerpc/include/asm/kgdb.h create mode 100644 arch/powerpc/include/asm/kmap_types.h create mode 100644 arch/powerpc/include/asm/kprobes.h create mode 100644 arch/powerpc/include/asm/kvm.h create mode 100644 arch/powerpc/include/asm/kvm_asm.h create mode 100644 arch/powerpc/include/asm/kvm_host.h create mode 100644 arch/powerpc/include/asm/kvm_para.h create mode 100644 arch/powerpc/include/asm/kvm_ppc.h create mode 100644 arch/powerpc/include/asm/libata-portmap.h create mode 100644 arch/powerpc/include/asm/linkage.h create mode 100644 arch/powerpc/include/asm/lmb.h create mode 100644 arch/powerpc/include/asm/local.h create mode 100644 arch/powerpc/include/asm/lppaca.h create mode 100644 arch/powerpc/include/asm/lv1call.h create mode 100644 arch/powerpc/include/asm/machdep.h create mode 100644 arch/powerpc/include/asm/macio.h create mode 100644 arch/powerpc/include/asm/mc146818rtc.h create mode 100644 arch/powerpc/include/asm/mediabay.h create mode 100644 arch/powerpc/include/asm/mman.h create mode 100644 arch/powerpc/include/asm/mmu-40x.h create mode 100644 arch/powerpc/include/asm/mmu-44x.h create mode 100644 arch/powerpc/include/asm/mmu-8xx.h create mode 100644 arch/powerpc/include/asm/mmu-fsl-booke.h create mode 100644 arch/powerpc/include/asm/mmu-hash32.h create mode 100644 arch/powerpc/include/asm/mmu-hash64.h create mode 100644 arch/powerpc/include/asm/mmu.h create mode 100644 arch/powerpc/include/asm/mmu_context.h create mode 100644 arch/powerpc/include/asm/mmzone.h create mode 100644 arch/powerpc/include/asm/module.h create mode 100644 arch/powerpc/include/asm/mpc512x.h create mode 100644 arch/powerpc/include/asm/mpc52xx.h create mode 100644 arch/powerpc/include/asm/mpc52xx_psc.h create mode 100644 arch/powerpc/include/asm/mpc6xx.h create mode 100644 arch/powerpc/include/asm/mpc8260.h create mode 100644 arch/powerpc/include/asm/mpc86xx.h create mode 100644 arch/powerpc/include/asm/mpc8xx.h create mode 100644 arch/powerpc/include/asm/mpic.h create mode 100644 arch/powerpc/include/asm/msgbuf.h create mode 100644 arch/powerpc/include/asm/mutex.h create mode 100644 arch/powerpc/include/asm/nvram.h create mode 100644 arch/powerpc/include/asm/of_device.h create mode 100644 arch/powerpc/include/asm/of_platform.h create mode 100644 arch/powerpc/include/asm/ohare.h create mode 100644 arch/powerpc/include/asm/oprofile_impl.h create mode 100644 arch/powerpc/include/asm/pSeries_reconfig.h create mode 100644 arch/powerpc/include/asm/paca.h create mode 100644 arch/powerpc/include/asm/page.h create mode 100644 arch/powerpc/include/asm/page_32.h create mode 100644 arch/powerpc/include/asm/page_64.h create mode 100644 arch/powerpc/include/asm/param.h create mode 100644 arch/powerpc/include/asm/parport.h create mode 100644 arch/powerpc/include/asm/pasemi_dma.h create mode 100644 arch/powerpc/include/asm/pci-bridge.h create mode 100644 arch/powerpc/include/asm/pci.h create mode 100644 arch/powerpc/include/asm/percpu.h create mode 100644 arch/powerpc/include/asm/pgalloc-32.h create mode 100644 arch/powerpc/include/asm/pgalloc-64.h create mode 100644 arch/powerpc/include/asm/pgalloc.h create mode 100644 arch/powerpc/include/asm/pgtable-4k.h create mode 100644 arch/powerpc/include/asm/pgtable-64k.h create mode 100644 arch/powerpc/include/asm/pgtable-ppc32.h create mode 100644 arch/powerpc/include/asm/pgtable-ppc64.h create mode 100644 arch/powerpc/include/asm/pgtable.h create mode 100644 arch/powerpc/include/asm/phyp_dump.h create mode 100644 arch/powerpc/include/asm/pmac_feature.h create mode 100644 arch/powerpc/include/asm/pmac_low_i2c.h create mode 100644 arch/powerpc/include/asm/pmac_pfunc.h create mode 100644 arch/powerpc/include/asm/pmc.h create mode 100644 arch/powerpc/include/asm/pmi.h create mode 100644 arch/powerpc/include/asm/poll.h create mode 100644 arch/powerpc/include/asm/posix_types.h create mode 100644 arch/powerpc/include/asm/ppc-pci.h create mode 100644 arch/powerpc/include/asm/ppc4xx.h create mode 100644 arch/powerpc/include/asm/ppc_asm.h create mode 100644 arch/powerpc/include/asm/processor.h create mode 100644 arch/powerpc/include/asm/prom.h create mode 100644 arch/powerpc/include/asm/ps3.h create mode 100644 arch/powerpc/include/asm/ps3av.h create mode 100644 arch/powerpc/include/asm/ps3fb.h create mode 100644 arch/powerpc/include/asm/ps3stor.h create mode 100644 arch/powerpc/include/asm/ptrace.h create mode 100644 arch/powerpc/include/asm/qe.h create mode 100644 arch/powerpc/include/asm/qe_ic.h create mode 100644 arch/powerpc/include/asm/reg.h create mode 100644 arch/powerpc/include/asm/reg_8xx.h create mode 100644 arch/powerpc/include/asm/reg_booke.h create mode 100644 arch/powerpc/include/asm/reg_fsl_emb.h create mode 100644 arch/powerpc/include/asm/resource.h create mode 100644 arch/powerpc/include/asm/rheap.h create mode 100644 arch/powerpc/include/asm/rio.h create mode 100644 arch/powerpc/include/asm/rtas.h create mode 100644 arch/powerpc/include/asm/rtc.h create mode 100644 arch/powerpc/include/asm/rwsem.h create mode 100644 arch/powerpc/include/asm/scatterlist.h create mode 100644 arch/powerpc/include/asm/seccomp.h create mode 100644 arch/powerpc/include/asm/sections.h create mode 100644 arch/powerpc/include/asm/sembuf.h create mode 100644 arch/powerpc/include/asm/serial.h create mode 100644 arch/powerpc/include/asm/setjmp.h create mode 100644 arch/powerpc/include/asm/setup.h create mode 100644 arch/powerpc/include/asm/shmbuf.h create mode 100644 arch/powerpc/include/asm/shmparam.h create mode 100644 arch/powerpc/include/asm/sigcontext.h create mode 100644 arch/powerpc/include/asm/siginfo.h create mode 100644 arch/powerpc/include/asm/signal.h create mode 100644 arch/powerpc/include/asm/smp.h create mode 100644 arch/powerpc/include/asm/smu.h create mode 100644 arch/powerpc/include/asm/socket.h create mode 100644 arch/powerpc/include/asm/sockios.h create mode 100644 arch/powerpc/include/asm/sparsemem.h create mode 100644 arch/powerpc/include/asm/spinlock.h create mode 100644 arch/powerpc/include/asm/spinlock_types.h create mode 100644 arch/powerpc/include/asm/spu.h create mode 100644 arch/powerpc/include/asm/spu_csa.h create mode 100644 arch/powerpc/include/asm/spu_info.h create mode 100644 arch/powerpc/include/asm/spu_priv1.h create mode 100644 arch/powerpc/include/asm/sstep.h create mode 100644 arch/powerpc/include/asm/stat.h create mode 100644 arch/powerpc/include/asm/statfs.h create mode 100644 arch/powerpc/include/asm/string.h create mode 100644 arch/powerpc/include/asm/suspend.h create mode 100644 arch/powerpc/include/asm/synch.h create mode 100644 arch/powerpc/include/asm/syscall.h create mode 100644 arch/powerpc/include/asm/syscalls.h create mode 100644 arch/powerpc/include/asm/systbl.h create mode 100644 arch/powerpc/include/asm/system.h create mode 100644 arch/powerpc/include/asm/tce.h create mode 100644 arch/powerpc/include/asm/termbits.h create mode 100644 arch/powerpc/include/asm/termios.h create mode 100644 arch/powerpc/include/asm/thread_info.h create mode 100644 arch/powerpc/include/asm/time.h create mode 100644 arch/powerpc/include/asm/timex.h create mode 100644 arch/powerpc/include/asm/tlb.h create mode 100644 arch/powerpc/include/asm/tlbflush.h create mode 100644 arch/powerpc/include/asm/topology.h create mode 100644 arch/powerpc/include/asm/tsi108.h create mode 100644 arch/powerpc/include/asm/tsi108_irq.h create mode 100644 arch/powerpc/include/asm/tsi108_pci.h create mode 100644 arch/powerpc/include/asm/types.h create mode 100644 arch/powerpc/include/asm/uaccess.h create mode 100644 arch/powerpc/include/asm/ucc.h create mode 100644 arch/powerpc/include/asm/ucc_fast.h create mode 100644 arch/powerpc/include/asm/ucc_slow.h create mode 100644 arch/powerpc/include/asm/ucontext.h create mode 100644 arch/powerpc/include/asm/udbg.h create mode 100644 arch/powerpc/include/asm/uic.h create mode 100644 arch/powerpc/include/asm/unaligned.h create mode 100644 arch/powerpc/include/asm/uninorth.h create mode 100644 arch/powerpc/include/asm/unistd.h create mode 100644 arch/powerpc/include/asm/user.h create mode 100644 arch/powerpc/include/asm/vdso.h create mode 100644 arch/powerpc/include/asm/vdso_datapage.h create mode 100644 arch/powerpc/include/asm/vga.h create mode 100644 arch/powerpc/include/asm/vio.h create mode 100644 arch/powerpc/include/asm/xilinx_intc.h create mode 100644 arch/powerpc/include/asm/xmon.h create mode 100644 arch/powerpc/include/asm/xor.h delete mode 100644 include/asm-powerpc/8253pit.h delete mode 100644 include/asm-powerpc/8xx_immap.h delete mode 100644 include/asm-powerpc/Kbuild delete mode 100644 include/asm-powerpc/a.out.h delete mode 100644 include/asm-powerpc/abs_addr.h delete mode 100644 include/asm-powerpc/agp.h delete mode 100644 include/asm-powerpc/asm-compat.h delete mode 100644 include/asm-powerpc/atomic.h delete mode 100644 include/asm-powerpc/auxvec.h delete mode 100644 include/asm-powerpc/backlight.h delete mode 100644 include/asm-powerpc/bitops.h delete mode 100644 include/asm-powerpc/bootx.h delete mode 100644 include/asm-powerpc/btext.h delete mode 100644 include/asm-powerpc/bug.h delete mode 100644 include/asm-powerpc/bugs.h delete mode 100644 include/asm-powerpc/byteorder.h delete mode 100644 include/asm-powerpc/cache.h delete mode 100644 include/asm-powerpc/cacheflush.h delete mode 100644 include/asm-powerpc/cell-pmu.h delete mode 100644 include/asm-powerpc/cell-regs.h delete mode 100644 include/asm-powerpc/checksum.h delete mode 100644 include/asm-powerpc/clk_interface.h delete mode 100644 include/asm-powerpc/code-patching.h delete mode 100644 include/asm-powerpc/compat.h delete mode 100644 include/asm-powerpc/cpm.h delete mode 100644 include/asm-powerpc/cpm1.h delete mode 100644 include/asm-powerpc/cpm2.h delete mode 100644 include/asm-powerpc/cputable.h delete mode 100644 include/asm-powerpc/cputhreads.h delete mode 100644 include/asm-powerpc/cputime.h delete mode 100644 include/asm-powerpc/current.h delete mode 100644 include/asm-powerpc/dbdma.h delete mode 100644 include/asm-powerpc/dcr-generic.h delete mode 100644 include/asm-powerpc/dcr-mmio.h delete mode 100644 include/asm-powerpc/dcr-native.h delete mode 100644 include/asm-powerpc/dcr-regs.h delete mode 100644 include/asm-powerpc/dcr.h delete mode 100644 include/asm-powerpc/delay.h delete mode 100644 include/asm-powerpc/device.h delete mode 100644 include/asm-powerpc/div64.h delete mode 100644 include/asm-powerpc/dma-mapping.h delete mode 100644 include/asm-powerpc/dma.h delete mode 100644 include/asm-powerpc/edac.h delete mode 100644 include/asm-powerpc/eeh.h delete mode 100644 include/asm-powerpc/eeh_event.h delete mode 100644 include/asm-powerpc/elf.h delete mode 100644 include/asm-powerpc/emergency-restart.h delete mode 100644 include/asm-powerpc/errno.h delete mode 100644 include/asm-powerpc/exception.h delete mode 100644 include/asm-powerpc/fb.h delete mode 100644 include/asm-powerpc/fcntl.h delete mode 100644 include/asm-powerpc/feature-fixups.h delete mode 100644 include/asm-powerpc/firmware.h delete mode 100644 include/asm-powerpc/fixmap.h delete mode 100644 include/asm-powerpc/floppy.h delete mode 100644 include/asm-powerpc/fs_pd.h delete mode 100644 include/asm-powerpc/fsl_gtm.h delete mode 100644 include/asm-powerpc/fsl_lbc.h delete mode 100644 include/asm-powerpc/ftrace.h delete mode 100644 include/asm-powerpc/futex.h delete mode 100644 include/asm-powerpc/gpio.h delete mode 100644 include/asm-powerpc/grackle.h delete mode 100644 include/asm-powerpc/hardirq.h delete mode 100644 include/asm-powerpc/heathrow.h delete mode 100644 include/asm-powerpc/highmem.h delete mode 100644 include/asm-powerpc/hugetlb.h delete mode 100644 include/asm-powerpc/hvcall.h delete mode 100644 include/asm-powerpc/hvconsole.h delete mode 100644 include/asm-powerpc/hvcserver.h delete mode 100644 include/asm-powerpc/hw_irq.h delete mode 100644 include/asm-powerpc/hydra.h delete mode 100644 include/asm-powerpc/i8259.h delete mode 100644 include/asm-powerpc/ibmebus.h delete mode 100644 include/asm-powerpc/ide.h delete mode 100644 include/asm-powerpc/immap_86xx.h delete mode 100644 include/asm-powerpc/immap_cpm2.h delete mode 100644 include/asm-powerpc/immap_qe.h delete mode 100644 include/asm-powerpc/io-defs.h delete mode 100644 include/asm-powerpc/io.h delete mode 100644 include/asm-powerpc/ioctl.h delete mode 100644 include/asm-powerpc/ioctls.h delete mode 100644 include/asm-powerpc/iommu.h delete mode 100644 include/asm-powerpc/ipcbuf.h delete mode 100644 include/asm-powerpc/ipic.h delete mode 100644 include/asm-powerpc/irq.h delete mode 100644 include/asm-powerpc/irq_regs.h delete mode 100644 include/asm-powerpc/irqflags.h delete mode 100644 include/asm-powerpc/iseries/alpaca.h delete mode 100644 include/asm-powerpc/iseries/hv_call.h delete mode 100644 include/asm-powerpc/iseries/hv_call_event.h delete mode 100644 include/asm-powerpc/iseries/hv_call_sc.h delete mode 100644 include/asm-powerpc/iseries/hv_call_xm.h delete mode 100644 include/asm-powerpc/iseries/hv_lp_config.h delete mode 100644 include/asm-powerpc/iseries/hv_lp_event.h delete mode 100644 include/asm-powerpc/iseries/hv_types.h delete mode 100644 include/asm-powerpc/iseries/iommu.h delete mode 100644 include/asm-powerpc/iseries/it_lp_queue.h delete mode 100644 include/asm-powerpc/iseries/lpar_map.h delete mode 100644 include/asm-powerpc/iseries/mf.h delete mode 100644 include/asm-powerpc/iseries/vio.h delete mode 100644 include/asm-powerpc/kdebug.h delete mode 100644 include/asm-powerpc/kdump.h delete mode 100644 include/asm-powerpc/kexec.h delete mode 100644 include/asm-powerpc/keylargo.h delete mode 100644 include/asm-powerpc/kgdb.h delete mode 100644 include/asm-powerpc/kmap_types.h delete mode 100644 include/asm-powerpc/kprobes.h delete mode 100644 include/asm-powerpc/kvm.h delete mode 100644 include/asm-powerpc/kvm_asm.h delete mode 100644 include/asm-powerpc/kvm_host.h delete mode 100644 include/asm-powerpc/kvm_para.h delete mode 100644 include/asm-powerpc/kvm_ppc.h delete mode 100644 include/asm-powerpc/libata-portmap.h delete mode 100644 include/asm-powerpc/linkage.h delete mode 100644 include/asm-powerpc/lmb.h delete mode 100644 include/asm-powerpc/local.h delete mode 100644 include/asm-powerpc/lppaca.h delete mode 100644 include/asm-powerpc/lv1call.h delete mode 100644 include/asm-powerpc/machdep.h delete mode 100644 include/asm-powerpc/macio.h delete mode 100644 include/asm-powerpc/mc146818rtc.h delete mode 100644 include/asm-powerpc/mediabay.h delete mode 100644 include/asm-powerpc/mman.h delete mode 100644 include/asm-powerpc/mmu-40x.h delete mode 100644 include/asm-powerpc/mmu-44x.h delete mode 100644 include/asm-powerpc/mmu-8xx.h delete mode 100644 include/asm-powerpc/mmu-fsl-booke.h delete mode 100644 include/asm-powerpc/mmu-hash32.h delete mode 100644 include/asm-powerpc/mmu-hash64.h delete mode 100644 include/asm-powerpc/mmu.h delete mode 100644 include/asm-powerpc/mmu_context.h delete mode 100644 include/asm-powerpc/mmzone.h delete mode 100644 include/asm-powerpc/module.h delete mode 100644 include/asm-powerpc/mpc512x.h delete mode 100644 include/asm-powerpc/mpc52xx.h delete mode 100644 include/asm-powerpc/mpc52xx_psc.h delete mode 100644 include/asm-powerpc/mpc6xx.h delete mode 100644 include/asm-powerpc/mpc8260.h delete mode 100644 include/asm-powerpc/mpc86xx.h delete mode 100644 include/asm-powerpc/mpc8xx.h delete mode 100644 include/asm-powerpc/mpic.h delete mode 100644 include/asm-powerpc/msgbuf.h delete mode 100644 include/asm-powerpc/mutex.h delete mode 100644 include/asm-powerpc/nvram.h delete mode 100644 include/asm-powerpc/of_device.h delete mode 100644 include/asm-powerpc/of_platform.h delete mode 100644 include/asm-powerpc/ohare.h delete mode 100644 include/asm-powerpc/oprofile_impl.h delete mode 100644 include/asm-powerpc/pSeries_reconfig.h delete mode 100644 include/asm-powerpc/paca.h delete mode 100644 include/asm-powerpc/page.h delete mode 100644 include/asm-powerpc/page_32.h delete mode 100644 include/asm-powerpc/page_64.h delete mode 100644 include/asm-powerpc/param.h delete mode 100644 include/asm-powerpc/parport.h delete mode 100644 include/asm-powerpc/pasemi_dma.h delete mode 100644 include/asm-powerpc/pci-bridge.h delete mode 100644 include/asm-powerpc/pci.h delete mode 100644 include/asm-powerpc/percpu.h delete mode 100644 include/asm-powerpc/pgalloc-32.h delete mode 100644 include/asm-powerpc/pgalloc-64.h delete mode 100644 include/asm-powerpc/pgalloc.h delete mode 100644 include/asm-powerpc/pgtable-4k.h delete mode 100644 include/asm-powerpc/pgtable-64k.h delete mode 100644 include/asm-powerpc/pgtable-ppc32.h delete mode 100644 include/asm-powerpc/pgtable-ppc64.h delete mode 100644 include/asm-powerpc/pgtable.h delete mode 100644 include/asm-powerpc/phyp_dump.h delete mode 100644 include/asm-powerpc/pmac_feature.h delete mode 100644 include/asm-powerpc/pmac_low_i2c.h delete mode 100644 include/asm-powerpc/pmac_pfunc.h delete mode 100644 include/asm-powerpc/pmc.h delete mode 100644 include/asm-powerpc/pmi.h delete mode 100644 include/asm-powerpc/poll.h delete mode 100644 include/asm-powerpc/posix_types.h delete mode 100644 include/asm-powerpc/ppc-pci.h delete mode 100644 include/asm-powerpc/ppc4xx.h delete mode 100644 include/asm-powerpc/ppc_asm.h delete mode 100644 include/asm-powerpc/processor.h delete mode 100644 include/asm-powerpc/prom.h delete mode 100644 include/asm-powerpc/ps3.h delete mode 100644 include/asm-powerpc/ps3av.h delete mode 100644 include/asm-powerpc/ps3fb.h delete mode 100644 include/asm-powerpc/ps3stor.h delete mode 100644 include/asm-powerpc/ptrace.h delete mode 100644 include/asm-powerpc/qe.h delete mode 100644 include/asm-powerpc/qe_ic.h delete mode 100644 include/asm-powerpc/reg.h delete mode 100644 include/asm-powerpc/reg_8xx.h delete mode 100644 include/asm-powerpc/reg_booke.h delete mode 100644 include/asm-powerpc/reg_fsl_emb.h delete mode 100644 include/asm-powerpc/resource.h delete mode 100644 include/asm-powerpc/rheap.h delete mode 100644 include/asm-powerpc/rio.h delete mode 100644 include/asm-powerpc/rtas.h delete mode 100644 include/asm-powerpc/rtc.h delete mode 100644 include/asm-powerpc/rwsem.h delete mode 100644 include/asm-powerpc/scatterlist.h delete mode 100644 include/asm-powerpc/seccomp.h delete mode 100644 include/asm-powerpc/sections.h delete mode 100644 include/asm-powerpc/sembuf.h delete mode 100644 include/asm-powerpc/serial.h delete mode 100644 include/asm-powerpc/setjmp.h delete mode 100644 include/asm-powerpc/setup.h delete mode 100644 include/asm-powerpc/shmbuf.h delete mode 100644 include/asm-powerpc/shmparam.h delete mode 100644 include/asm-powerpc/sigcontext.h delete mode 100644 include/asm-powerpc/siginfo.h delete mode 100644 include/asm-powerpc/signal.h delete mode 100644 include/asm-powerpc/smp.h delete mode 100644 include/asm-powerpc/smu.h delete mode 100644 include/asm-powerpc/socket.h delete mode 100644 include/asm-powerpc/sockios.h delete mode 100644 include/asm-powerpc/sparsemem.h delete mode 100644 include/asm-powerpc/spinlock.h delete mode 100644 include/asm-powerpc/spinlock_types.h delete mode 100644 include/asm-powerpc/spu.h delete mode 100644 include/asm-powerpc/spu_csa.h delete mode 100644 include/asm-powerpc/spu_info.h delete mode 100644 include/asm-powerpc/spu_priv1.h delete mode 100644 include/asm-powerpc/sstep.h delete mode 100644 include/asm-powerpc/stat.h delete mode 100644 include/asm-powerpc/statfs.h delete mode 100644 include/asm-powerpc/string.h delete mode 100644 include/asm-powerpc/suspend.h delete mode 100644 include/asm-powerpc/synch.h delete mode 100644 include/asm-powerpc/syscall.h delete mode 100644 include/asm-powerpc/syscalls.h delete mode 100644 include/asm-powerpc/systbl.h delete mode 100644 include/asm-powerpc/system.h delete mode 100644 include/asm-powerpc/tce.h delete mode 100644 include/asm-powerpc/termbits.h delete mode 100644 include/asm-powerpc/termios.h delete mode 100644 include/asm-powerpc/thread_info.h delete mode 100644 include/asm-powerpc/time.h delete mode 100644 include/asm-powerpc/timex.h delete mode 100644 include/asm-powerpc/tlb.h delete mode 100644 include/asm-powerpc/tlbflush.h delete mode 100644 include/asm-powerpc/topology.h delete mode 100644 include/asm-powerpc/tsi108.h delete mode 100644 include/asm-powerpc/tsi108_irq.h delete mode 100644 include/asm-powerpc/tsi108_pci.h delete mode 100644 include/asm-powerpc/types.h delete mode 100644 include/asm-powerpc/uaccess.h delete mode 100644 include/asm-powerpc/ucc.h delete mode 100644 include/asm-powerpc/ucc_fast.h delete mode 100644 include/asm-powerpc/ucc_slow.h delete mode 100644 include/asm-powerpc/ucontext.h delete mode 100644 include/asm-powerpc/udbg.h delete mode 100644 include/asm-powerpc/uic.h delete mode 100644 include/asm-powerpc/unaligned.h delete mode 100644 include/asm-powerpc/uninorth.h delete mode 100644 include/asm-powerpc/unistd.h delete mode 100644 include/asm-powerpc/user.h delete mode 100644 include/asm-powerpc/vdso.h delete mode 100644 include/asm-powerpc/vdso_datapage.h delete mode 100644 include/asm-powerpc/vga.h delete mode 100644 include/asm-powerpc/vio.h delete mode 100644 include/asm-powerpc/xilinx_intc.h delete mode 100644 include/asm-powerpc/xmon.h delete mode 100644 include/asm-powerpc/xor.h diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 928a79ceb7aa..de4063cb4fdc 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -278,7 +278,7 @@ it with special cases. a 64-bit platform. d) request and get assigned a platform number (see PLATFORM_* - constants in include/asm-powerpc/processor.h + constants in arch/powerpc/include/asm/processor.h 32-bit embedded kernels: @@ -340,7 +340,7 @@ the block to RAM before passing it to the kernel. --------- The kernel is entered with r3 pointing to an area of memory that is - roughly described in include/asm-powerpc/prom.h by the structure + roughly described in arch/powerpc/include/asm/prom.h by the structure boot_param_header: struct boot_param_header { diff --git a/Documentation/powerpc/eeh-pci-error-recovery.txt b/Documentation/powerpc/eeh-pci-error-recovery.txt index df7afe43d462..9d4e33df624c 100644 --- a/Documentation/powerpc/eeh-pci-error-recovery.txt +++ b/Documentation/powerpc/eeh-pci-error-recovery.txt @@ -133,7 +133,7 @@ error. Given an arbitrary address, the routine pci_get_device_by_addr() will find the pci device associated with that address (if any). -The default include/asm-powerpc/io.h macros readb(), inb(), insb(), +The default arch/powerpc/include/asm/io.h macros readb(), inb(), insb(), etc. include a check to see if the i/o read returned all-0xff's. If so, these make a call to eeh_dn_check_failure(), which in turn asks the firmware if the all-ff's value is the sign of a true EEH diff --git a/arch/powerpc/boot/io.h b/arch/powerpc/boot/io.h index ccaedaec50d5..7c09f4861fe1 100644 --- a/arch/powerpc/boot/io.h +++ b/arch/powerpc/boot/io.h @@ -6,7 +6,7 @@ /* * Low-level I/O routines. * - * Copied from (which has no copyright) + * Copied from (which has no copyright) */ static inline int in_8(const volatile unsigned char *addr) { diff --git a/arch/powerpc/include/asm/8253pit.h b/arch/powerpc/include/asm/8253pit.h new file mode 100644 index 000000000000..b70d6e53b303 --- /dev/null +++ b/arch/powerpc/include/asm/8253pit.h @@ -0,0 +1,10 @@ +#ifndef _ASM_POWERPC_8253PIT_H +#define _ASM_POWERPC_8253PIT_H + +/* + * 8253/8254 Programmable Interval Timer + */ + +#define PIT_TICK_RATE 1193182UL + +#endif /* _ASM_POWERPC_8253PIT_H */ diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h new file mode 100644 index 000000000000..4b0e15206006 --- /dev/null +++ b/arch/powerpc/include/asm/8xx_immap.h @@ -0,0 +1,564 @@ +/* + * MPC8xx Internal Memory Map + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + * + * The I/O on the MPC860 is comprised of blocks of special registers + * and the dual port ram for the Communication Processor Module. + * Within this space are functional units such as the SIU, memory + * controller, system timers, and other control functions. It is + * a combination that I found difficult to separate into logical + * functional files.....but anyone else is welcome to try. -- Dan + */ +#ifdef __KERNEL__ +#ifndef __IMMAP_8XX__ +#define __IMMAP_8XX__ + +/* System configuration registers. +*/ +typedef struct sys_conf { + uint sc_siumcr; + uint sc_sypcr; + uint sc_swt; + char res1[2]; + ushort sc_swsr; + uint sc_sipend; + uint sc_simask; + uint sc_siel; + uint sc_sivec; + uint sc_tesr; + char res2[0xc]; + uint sc_sdcr; + char res3[0x4c]; +} sysconf8xx_t; + +/* PCMCIA configuration registers. +*/ +typedef struct pcmcia_conf { + uint pcmc_pbr0; + uint pcmc_por0; + uint pcmc_pbr1; + uint pcmc_por1; + uint pcmc_pbr2; + uint pcmc_por2; + uint pcmc_pbr3; + uint pcmc_por3; + uint pcmc_pbr4; + uint pcmc_por4; + uint pcmc_pbr5; + uint pcmc_por5; + uint pcmc_pbr6; + uint pcmc_por6; + uint pcmc_pbr7; + uint pcmc_por7; + char res1[0x20]; + uint pcmc_pgcra; + uint pcmc_pgcrb; + uint pcmc_pscr; + char res2[4]; + uint pcmc_pipr; + char res3[4]; + uint pcmc_per; + char res4[4]; +} pcmconf8xx_t; + +/* Memory controller registers. +*/ +typedef struct mem_ctlr { + uint memc_br0; + uint memc_or0; + uint memc_br1; + uint memc_or1; + uint memc_br2; + uint memc_or2; + uint memc_br3; + uint memc_or3; + uint memc_br4; + uint memc_or4; + uint memc_br5; + uint memc_or5; + uint memc_br6; + uint memc_or6; + uint memc_br7; + uint memc_or7; + char res1[0x24]; + uint memc_mar; + uint memc_mcr; + char res2[4]; + uint memc_mamr; + uint memc_mbmr; + ushort memc_mstat; + ushort memc_mptpr; + uint memc_mdr; + char res3[0x80]; +} memctl8xx_t; + +/*----------------------------------------------------------------------- + * BR - Memory Controler: Base Register 16-9 + */ +#define BR_BA_MSK 0xffff8000 /* Base Address Mask */ +#define BR_AT_MSK 0x00007000 /* Address Type Mask */ +#define BR_PS_MSK 0x00000c00 /* Port Size Mask */ +#define BR_PS_32 0x00000000 /* 32 bit port size */ +#define BR_PS_16 0x00000800 /* 16 bit port size */ +#define BR_PS_8 0x00000400 /* 8 bit port size */ +#define BR_PARE 0x00000200 /* Parity Enable */ +#define BR_WP 0x00000100 /* Write Protect */ +#define BR_MS_MSK 0x000000c0 /* Machine Select Mask */ +#define BR_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */ +#define BR_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */ +#define BR_MS_UPMB 0x000000c0 /* U.P.M.B Machine Select */ +#define BR_V 0x00000001 /* Bank Valid */ + +/*----------------------------------------------------------------------- + * OR - Memory Controler: Option Register 16-11 + */ +#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */ +#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */ +#define OR_CSNT_SAM 0x00000800 /* Chip Select Negation Time/ Start */ + /* Address Multiplex */ +#define OR_ACS_MSK 0x00000600 /* Address to Chip Select Setup mask */ +#define OR_ACS_DIV1 0x00000000 /* CS is output at the same time */ +#define OR_ACS_DIV4 0x00000400 /* CS is output 1/4 a clock later */ +#define OR_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later */ +#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */ +#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/ +#define OR_BI 0x00000100 /* Burst inhibit */ +#define OR_SCY_MSK 0x000000f0 /* Cycle Length in Clocks */ +#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */ +#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */ +#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */ +#define OR_SCY_3_CLK 0x00000030 /* 3 clock cycles wait states */ +#define OR_SCY_4_CLK 0x00000040 /* 4 clock cycles wait states */ +#define OR_SCY_5_CLK 0x00000050 /* 5 clock cycles wait states */ +#define OR_SCY_6_CLK 0x00000060 /* 6 clock cycles wait states */ +#define OR_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */ +#define OR_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */ +#define OR_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */ +#define OR_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */ +#define OR_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */ +#define OR_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */ +#define OR_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */ +#define OR_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */ +#define OR_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */ +#define OR_SETA 0x00000008 /* External Transfer Acknowledge */ +#define OR_TRLX 0x00000004 /* Timing Relaxed */ +#define OR_EHTR 0x00000002 /* Extended Hold Time on Read */ + +/* System Integration Timers. +*/ +typedef struct sys_int_timers { + ushort sit_tbscr; + char res0[0x02]; + uint sit_tbreff0; + uint sit_tbreff1; + char res1[0x14]; + ushort sit_rtcsc; + char res2[0x02]; + uint sit_rtc; + uint sit_rtsec; + uint sit_rtcal; + char res3[0x10]; + ushort sit_piscr; + char res4[2]; + uint sit_pitc; + uint sit_pitr; + char res5[0x34]; +} sit8xx_t; + +#define TBSCR_TBIRQ_MASK ((ushort)0xff00) +#define TBSCR_REFA ((ushort)0x0080) +#define TBSCR_REFB ((ushort)0x0040) +#define TBSCR_REFAE ((ushort)0x0008) +#define TBSCR_REFBE ((ushort)0x0004) +#define TBSCR_TBF ((ushort)0x0002) +#define TBSCR_TBE ((ushort)0x0001) + +#define RTCSC_RTCIRQ_MASK ((ushort)0xff00) +#define RTCSC_SEC ((ushort)0x0080) +#define RTCSC_ALR ((ushort)0x0040) +#define RTCSC_38K ((ushort)0x0010) +#define RTCSC_SIE ((ushort)0x0008) +#define RTCSC_ALE ((ushort)0x0004) +#define RTCSC_RTF ((ushort)0x0002) +#define RTCSC_RTE ((ushort)0x0001) + +#define PISCR_PIRQ_MASK ((ushort)0xff00) +#define PISCR_PS ((ushort)0x0080) +#define PISCR_PIE ((ushort)0x0004) +#define PISCR_PTF ((ushort)0x0002) +#define PISCR_PTE ((ushort)0x0001) + +/* Clocks and Reset. +*/ +typedef struct clk_and_reset { + uint car_sccr; + uint car_plprcr; + uint car_rsr; + char res[0x74]; /* Reserved area */ +} car8xx_t; + +/* System Integration Timers keys. +*/ +typedef struct sitk { + uint sitk_tbscrk; + uint sitk_tbreff0k; + uint sitk_tbreff1k; + uint sitk_tbk; + char res1[0x10]; + uint sitk_rtcsck; + uint sitk_rtck; + uint sitk_rtseck; + uint sitk_rtcalk; + char res2[0x10]; + uint sitk_piscrk; + uint sitk_pitck; + char res3[0x38]; +} sitk8xx_t; + +/* Clocks and reset keys. +*/ +typedef struct cark { + uint cark_sccrk; + uint cark_plprcrk; + uint cark_rsrk; + char res[0x474]; +} cark8xx_t; + +/* The key to unlock registers maintained by keep-alive power. +*/ +#define KAPWR_KEY ((unsigned int)0x55ccaa33) + +/* Video interface. MPC823 Only. +*/ +typedef struct vid823 { + ushort vid_vccr; + ushort res1; + u_char vid_vsr; + u_char res2; + u_char vid_vcmr; + u_char res3; + uint vid_vbcb; + uint res4; + uint vid_vfcr0; + uint vid_vfaa0; + uint vid_vfba0; + uint vid_vfcr1; + uint vid_vfaa1; + uint vid_vfba1; + u_char res5[0x18]; +} vid823_t; + +/* LCD interface. 823 Only. +*/ +typedef struct lcd { + uint lcd_lccr; + uint lcd_lchcr; + uint lcd_lcvcr; + char res1[4]; + uint lcd_lcfaa; + uint lcd_lcfba; + char lcd_lcsr; + char res2[0x7]; +} lcd823_t; + +/* I2C +*/ +typedef struct i2c { + u_char i2c_i2mod; + char res1[3]; + u_char i2c_i2add; + char res2[3]; + u_char i2c_i2brg; + char res3[3]; + u_char i2c_i2com; + char res4[3]; + u_char i2c_i2cer; + char res5[3]; + u_char i2c_i2cmr; + char res6[0x8b]; +} i2c8xx_t; + +/* DMA control/status registers. +*/ +typedef struct sdma_csr { + char res1[4]; + uint sdma_sdar; + u_char sdma_sdsr; + char res3[3]; + u_char sdma_sdmr; + char res4[3]; + u_char sdma_idsr1; + char res5[3]; + u_char sdma_idmr1; + char res6[3]; + u_char sdma_idsr2; + char res7[3]; + u_char sdma_idmr2; + char res8[0x13]; +} sdma8xx_t; + +/* Communication Processor Module Interrupt Controller. +*/ +typedef struct cpm_ic { + ushort cpic_civr; + char res[0xe]; + uint cpic_cicr; + uint cpic_cipr; + uint cpic_cimr; + uint cpic_cisr; +} cpic8xx_t; + +/* Input/Output Port control/status registers. +*/ +typedef struct io_port { + ushort iop_padir; + ushort iop_papar; + ushort iop_paodr; + ushort iop_padat; + char res1[8]; + ushort iop_pcdir; + ushort iop_pcpar; + ushort iop_pcso; + ushort iop_pcdat; + ushort iop_pcint; + char res2[6]; + ushort iop_pddir; + ushort iop_pdpar; + char res3[2]; + ushort iop_pddat; + uint utmode; + char res4[4]; +} iop8xx_t; + +/* Communication Processor Module Timers +*/ +typedef struct cpm_timers { + ushort cpmt_tgcr; + char res1[0xe]; + ushort cpmt_tmr1; + ushort cpmt_tmr2; + ushort cpmt_trr1; + ushort cpmt_trr2; + ushort cpmt_tcr1; + ushort cpmt_tcr2; + ushort cpmt_tcn1; + ushort cpmt_tcn2; + ushort cpmt_tmr3; + ushort cpmt_tmr4; + ushort cpmt_trr3; + ushort cpmt_trr4; + ushort cpmt_tcr3; + ushort cpmt_tcr4; + ushort cpmt_tcn3; + ushort cpmt_tcn4; + ushort cpmt_ter1; + ushort cpmt_ter2; + ushort cpmt_ter3; + ushort cpmt_ter4; + char res2[8]; +} cpmtimer8xx_t; + +/* Finally, the Communication Processor stuff..... +*/ +typedef struct scc { /* Serial communication channels */ + uint scc_gsmrl; + uint scc_gsmrh; + ushort scc_psmr; + char res1[2]; + ushort scc_todr; + ushort scc_dsr; + ushort scc_scce; + char res2[2]; + ushort scc_sccm; + char res3; + u_char scc_sccs; + char res4[8]; +} scc_t; + +typedef struct smc { /* Serial management channels */ + char res1[2]; + ushort smc_smcmr; + char res2[2]; + u_char smc_smce; + char res3[3]; + u_char smc_smcm; + char res4[5]; +} smc_t; + +/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but + * it fits within the address space. + */ + +typedef struct fec { + uint fec_addr_low; /* lower 32 bits of station address */ + ushort fec_addr_high; /* upper 16 bits of station address */ + ushort res1; /* reserved */ + uint fec_hash_table_high; /* upper 32-bits of hash table */ + uint fec_hash_table_low; /* lower 32-bits of hash table */ + uint fec_r_des_start; /* beginning of Rx descriptor ring */ + uint fec_x_des_start; /* beginning of Tx descriptor ring */ + uint fec_r_buff_size; /* Rx buffer size */ + uint res2[9]; /* reserved */ + uint fec_ecntrl; /* ethernet control register */ + uint fec_ievent; /* interrupt event register */ + uint fec_imask; /* interrupt mask register */ + uint fec_ivec; /* interrupt level and vector status */ + uint fec_r_des_active; /* Rx ring updated flag */ + uint fec_x_des_active; /* Tx ring updated flag */ + uint res3[10]; /* reserved */ + uint fec_mii_data; /* MII data register */ + uint fec_mii_speed; /* MII speed control register */ + uint res4[17]; /* reserved */ + uint fec_r_bound; /* end of RAM (read-only) */ + uint fec_r_fstart; /* Rx FIFO start address */ + uint res5[6]; /* reserved */ + uint fec_x_fstart; /* Tx FIFO start address */ + uint res6[17]; /* reserved */ + uint fec_fun_code; /* fec SDMA function code */ + uint res7[3]; /* reserved */ + uint fec_r_cntrl; /* Rx control register */ + uint fec_r_hash; /* Rx hash register */ + uint res8[14]; /* reserved */ + uint fec_x_cntrl; /* Tx control register */ + uint res9[0x1e]; /* reserved */ +} fec_t; + +/* The FEC and LCD color map share the same address space.... + * I guess we will never see an 823T :-). + */ +union fec_lcd { + fec_t fl_un_fec; + u_char fl_un_cmap[0x200]; +}; + +typedef struct comm_proc { + /* General control and status registers. + */ + ushort cp_cpcr; + u_char res1[2]; + ushort cp_rccr; + u_char res2; + u_char cp_rmds; + u_char res3[4]; + ushort cp_cpmcr1; + ushort cp_cpmcr2; + ushort cp_cpmcr3; + ushort cp_cpmcr4; + u_char res4[2]; + ushort cp_rter; + u_char res5[2]; + ushort cp_rtmr; + u_char res6[0x14]; + + /* Baud rate generators. + */ + uint cp_brgc1; + uint cp_brgc2; + uint cp_brgc3; + uint cp_brgc4; + + /* Serial Communication Channels. + */ + scc_t cp_scc[4]; + + /* Serial Management Channels. + */ + smc_t cp_smc[2]; + + /* Serial Peripheral Interface. + */ + ushort cp_spmode; + u_char res7[4]; + u_char cp_spie; + u_char res8[3]; + u_char cp_spim; + u_char res9[2]; + u_char cp_spcom; + u_char res10[2]; + + /* Parallel Interface Port. + */ + u_char res11[2]; + ushort cp_pipc; + u_char res12[2]; + ushort cp_ptpr; + uint cp_pbdir; + uint cp_pbpar; + u_char res13[2]; + ushort cp_pbodr; + uint cp_pbdat; + + /* Port E - MPC87x/88x only. + */ + uint cp_pedir; + uint cp_pepar; + uint cp_peso; + uint cp_peodr; + uint cp_pedat; + + /* Communications Processor Timing Register - + Contains RMII Timing for the FECs on MPC87x/88x only. + */ + uint cp_cptr; + + /* Serial Interface and Time Slot Assignment. + */ + uint cp_simode; + u_char cp_sigmr; + u_char res15; + u_char cp_sistr; + u_char cp_sicmr; + u_char res16[4]; + uint cp_sicr; + uint cp_sirp; + u_char res17[0xc]; + + /* 256 bytes of MPC823 video controller RAM array. + */ + u_char cp_vcram[0x100]; + u_char cp_siram[0x200]; + + /* The fast ethernet controller is not really part of the CPM, + * but it resides in the address space. + * The LCD color map is also here. + */ + union fec_lcd fl_un; +#define cp_fec fl_un.fl_un_fec +#define lcd_cmap fl_un.fl_un_cmap + char res18[0xE00]; + + /* The DUET family has a second FEC here */ + fec_t cp_fec2; +#define cp_fec1 cp_fec /* consistency macro */ + + /* Dual Ported RAM follows. + * There are many different formats for this memory area + * depending upon the devices used and options chosen. + * Some processors don't have all of it populated. + */ + u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */ + u_char cp_dparam[0x400]; /* Parameter RAM */ +} cpm8xx_t; + +/* Internal memory map. +*/ +typedef struct immap { + sysconf8xx_t im_siu_conf; /* SIU Configuration */ + pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */ + memctl8xx_t im_memctl; /* Memory Controller */ + sit8xx_t im_sit; /* System integration timers */ + car8xx_t im_clkrst; /* Clocks and reset */ + sitk8xx_t im_sitk; /* Sys int timer keys */ + cark8xx_t im_clkrstk; /* Clocks and reset keys */ + vid823_t im_vid; /* Video (823 only) */ + lcd823_t im_lcd; /* LCD (823 only) */ + i2c8xx_t im_i2c; /* I2C control/status */ + sdma8xx_t im_sdma; /* SDMA control/status */ + cpic8xx_t im_cpic; /* CPM Interrupt Controller */ + iop8xx_t im_ioport; /* IO Port control/status */ + cpmtimer8xx_t im_cpmtimer; /* CPM timers */ + cpm8xx_t im_cpm; /* Communication processor */ +} immap_t; + +#endif /* __IMMAP_8XX__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild new file mode 100644 index 000000000000..5ab7d7fe198c --- /dev/null +++ b/arch/powerpc/include/asm/Kbuild @@ -0,0 +1,37 @@ +include include/asm-generic/Kbuild.asm + +header-y += auxvec.h +header-y += ioctls.h +header-y += sembuf.h +header-y += siginfo.h +header-y += stat.h +header-y += errno.h +header-y += ipcbuf.h +header-y += msgbuf.h +header-y += shmbuf.h +header-y += socket.h +header-y += termbits.h +header-y += fcntl.h +header-y += poll.h +header-y += sockios.h +header-y += ucontext.h +header-y += ioctl.h +header-y += linkage.h +header-y += resource.h +header-y += sigcontext.h +header-y += statfs.h +header-y += ps3fb.h + +unifdef-y += bootx.h +unifdef-y += byteorder.h +unifdef-y += cputable.h +unifdef-y += elf.h +unifdef-y += nvram.h +unifdef-y += param.h +unifdef-y += posix_types.h +unifdef-y += seccomp.h +unifdef-y += signal.h +unifdef-y += spu_info.h +unifdef-y += termios.h +unifdef-y += types.h +unifdef-y += unistd.h diff --git a/arch/powerpc/include/asm/a.out.h b/arch/powerpc/include/asm/a.out.h new file mode 100644 index 000000000000..89cead6b176e --- /dev/null +++ b/arch/powerpc/include/asm/a.out.h @@ -0,0 +1,20 @@ +#ifndef _ASM_POWERPC_A_OUT_H +#define _ASM_POWERPC_A_OUT_H + +struct exec +{ + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#endif /* _ASM_POWERPC_A_OUT_H */ diff --git a/arch/powerpc/include/asm/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h new file mode 100644 index 000000000000..98324c5a8286 --- /dev/null +++ b/arch/powerpc/include/asm/abs_addr.h @@ -0,0 +1,75 @@ +#ifndef _ASM_POWERPC_ABS_ADDR_H +#define _ASM_POWERPC_ABS_ADDR_H +#ifdef __KERNEL__ + + +/* + * c 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +#include +#include +#include +#include + +struct mschunks_map { + unsigned long num_chunks; + unsigned long chunk_size; + unsigned long chunk_shift; + unsigned long chunk_mask; + u32 *mapping; +}; + +extern struct mschunks_map mschunks_map; + +/* Chunks are 256 KB */ +#define MSCHUNKS_CHUNK_SHIFT (18) +#define MSCHUNKS_CHUNK_SIZE (1UL << MSCHUNKS_CHUNK_SHIFT) +#define MSCHUNKS_OFFSET_MASK (MSCHUNKS_CHUNK_SIZE - 1) + +static inline unsigned long chunk_to_addr(unsigned long chunk) +{ + return chunk << MSCHUNKS_CHUNK_SHIFT; +} + +static inline unsigned long addr_to_chunk(unsigned long addr) +{ + return addr >> MSCHUNKS_CHUNK_SHIFT; +} + +static inline unsigned long phys_to_abs(unsigned long pa) +{ + unsigned long chunk; + + /* This is a no-op on non-iSeries */ + if (!firmware_has_feature(FW_FEATURE_ISERIES)) + return pa; + + chunk = addr_to_chunk(pa); + + if (chunk < mschunks_map.num_chunks) + chunk = mschunks_map.mapping[chunk]; + + return chunk_to_addr(chunk) + (pa & MSCHUNKS_OFFSET_MASK); +} + +/* Convenience macros */ +#define virt_to_abs(va) phys_to_abs(__pa(va)) +#define abs_to_virt(aa) __va(aa) + +/* + * Converts Virtual Address to Real Address for + * Legacy iSeries Hypervisor calls + */ +#define iseries_hv_addr(virtaddr) \ + (0x8000000000000000 | virt_to_abs(virtaddr)) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_ABS_ADDR_H */ diff --git a/arch/powerpc/include/asm/agp.h b/arch/powerpc/include/asm/agp.h new file mode 100644 index 000000000000..86455c4c31ee --- /dev/null +++ b/arch/powerpc/include/asm/agp.h @@ -0,0 +1,22 @@ +#ifndef _ASM_POWERPC_AGP_H +#define _ASM_POWERPC_AGP_H +#ifdef __KERNEL__ + +#include + +#define map_page_into_agp(page) +#define unmap_page_from_agp(page) +#define flush_agp_cache() mb() + +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_AGP_H */ diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h new file mode 100644 index 000000000000..8f0fe7971949 --- /dev/null +++ b/arch/powerpc/include/asm/asm-compat.h @@ -0,0 +1,69 @@ +#ifndef _ASM_POWERPC_ASM_COMPAT_H +#define _ASM_POWERPC_ASM_COMPAT_H + +#include + +#ifdef __ASSEMBLY__ +# define stringify_in_c(...) __VA_ARGS__ +# define ASM_CONST(x) x +#else +/* This version of stringify will deal with commas... */ +# define __stringify_in_c(...) #__VA_ARGS__ +# define stringify_in_c(...) __stringify_in_c(__VA_ARGS__) " " +# define __ASM_CONST(x) x##UL +# define ASM_CONST(x) __ASM_CONST(x) +#endif + + +#ifdef __powerpc64__ + +/* operations for longs and pointers */ +#define PPC_LL stringify_in_c(ld) +#define PPC_STL stringify_in_c(std) +#define PPC_LCMPI stringify_in_c(cmpdi) +#define PPC_LONG stringify_in_c(.llong) +#define PPC_LONG_ALIGN stringify_in_c(.balign 8) +#define PPC_TLNEI stringify_in_c(tdnei) +#define PPC_LLARX stringify_in_c(ldarx) +#define PPC_STLCX stringify_in_c(stdcx.) +#define PPC_CNTLZL stringify_in_c(cntlzd) + +/* Move to CR, single-entry optimized version. Only available + * on POWER4 and later. + */ +#ifdef CONFIG_POWER4_ONLY +#define PPC_MTOCRF stringify_in_c(mtocrf) +#else +#define PPC_MTOCRF stringify_in_c(mtcrf) +#endif + +#else /* 32-bit */ + +/* operations for longs and pointers */ +#define PPC_LL stringify_in_c(lwz) +#define PPC_STL stringify_in_c(stw) +#define PPC_LCMPI stringify_in_c(cmpwi) +#define PPC_LONG stringify_in_c(.long) +#define PPC_LONG_ALIGN stringify_in_c(.balign 4) +#define PPC_TLNEI stringify_in_c(twnei) +#define PPC_LLARX stringify_in_c(lwarx) +#define PPC_STLCX stringify_in_c(stwcx.) +#define PPC_CNTLZL stringify_in_c(cntlzw) +#define PPC_MTOCRF stringify_in_c(mtcrf) + +#endif + +#ifdef __KERNEL__ +#ifdef CONFIG_IBM405_ERR77 +/* Erratum #77 on the 405 means we need a sync or dcbt before every + * stwcx. The old ATOMIC_SYNC_FIX covered some but not all of this. + */ +#define PPC405_ERR77(ra,rb) stringify_in_c(dcbt ra, rb;) +#define PPC405_ERR77_SYNC stringify_in_c(sync;) +#else +#define PPC405_ERR77(ra,rb) +#define PPC405_ERR77_SYNC +#endif +#endif + +#endif /* _ASM_POWERPC_ASM_COMPAT_H */ diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h new file mode 100644 index 000000000000..f3fc733758f5 --- /dev/null +++ b/arch/powerpc/include/asm/atomic.h @@ -0,0 +1,479 @@ +#ifndef _ASM_POWERPC_ATOMIC_H_ +#define _ASM_POWERPC_ATOMIC_H_ + +/* + * PowerPC atomic operations + */ + +typedef struct { int counter; } atomic_t; + +#ifdef __KERNEL__ +#include +#include +#include +#include + +#define ATOMIC_INIT(i) { (i) } + +static __inline__ int atomic_read(const atomic_t *v) +{ + int t; + + __asm__ __volatile__("lwz%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter)); + + return t; +} + +static __inline__ void atomic_set(atomic_t *v, int i) +{ + __asm__ __volatile__("stw%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i)); +} + +static __inline__ void atomic_add(int a, atomic_t *v) +{ + int t; + + __asm__ __volatile__( +"1: lwarx %0,0,%3 # atomic_add\n\ + add %0,%2,%0\n" + PPC405_ERR77(0,%3) +" stwcx. %0,0,%3 \n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (a), "r" (&v->counter) + : "cc"); +} + +static __inline__ int atomic_add_return(int a, atomic_t *v) +{ + int t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: lwarx %0,0,%2 # atomic_add_return\n\ + add %0,%1,%0\n" + PPC405_ERR77(0,%2) +" stwcx. %0,0,%2 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (a), "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) + +static __inline__ void atomic_sub(int a, atomic_t *v) +{ + int t; + + __asm__ __volatile__( +"1: lwarx %0,0,%3 # atomic_sub\n\ + subf %0,%2,%0\n" + PPC405_ERR77(0,%3) +" stwcx. %0,0,%3 \n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (a), "r" (&v->counter) + : "cc"); +} + +static __inline__ int atomic_sub_return(int a, atomic_t *v) +{ + int t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: lwarx %0,0,%2 # atomic_sub_return\n\ + subf %0,%1,%0\n" + PPC405_ERR77(0,%2) +" stwcx. %0,0,%2 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (a), "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +static __inline__ void atomic_inc(atomic_t *v) +{ + int t; + + __asm__ __volatile__( +"1: lwarx %0,0,%2 # atomic_inc\n\ + addic %0,%0,1\n" + PPC405_ERR77(0,%2) +" stwcx. %0,0,%2 \n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc"); +} + +static __inline__ int atomic_inc_return(atomic_t *v) +{ + int t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: lwarx %0,0,%1 # atomic_inc_return\n\ + addic %0,%0,1\n" + PPC405_ERR77(0,%1) +" stwcx. %0,0,%1 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +/* + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) + +static __inline__ void atomic_dec(atomic_t *v) +{ + int t; + + __asm__ __volatile__( +"1: lwarx %0,0,%2 # atomic_dec\n\ + addic %0,%0,-1\n" + PPC405_ERR77(0,%2)\ +" stwcx. %0,0,%2\n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc"); +} + +static __inline__ int atomic_dec_return(atomic_t *v) +{ + int t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: lwarx %0,0,%1 # atomic_dec_return\n\ + addic %0,%0,-1\n" + PPC405_ERR77(0,%1) +" stwcx. %0,0,%1\n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +/** + * atomic_add_unless - add unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) +{ + int t; + + __asm__ __volatile__ ( + LWSYNC_ON_SMP +"1: lwarx %0,0,%1 # atomic_add_unless\n\ + cmpw 0,%0,%3 \n\ + beq- 2f \n\ + add %0,%2,%0 \n" + PPC405_ERR77(0,%2) +" stwcx. %0,0,%1 \n\ + bne- 1b \n" + ISYNC_ON_SMP +" subf %0,%2,%0 \n\ +2:" + : "=&r" (t) + : "r" (&v->counter), "r" (a), "r" (u) + : "cc", "memory"); + + return t != u; +} + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +#define atomic_sub_and_test(a, v) (atomic_sub_return((a), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_dec_return((v)) == 0) + +/* + * Atomically test *v and decrement if it is greater than 0. + * The function returns the old value of *v minus 1, even if + * the atomic variable, v, was not decremented. + */ +static __inline__ int atomic_dec_if_positive(atomic_t *v) +{ + int t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: lwarx %0,0,%1 # atomic_dec_if_positive\n\ + cmpwi %0,1\n\ + addi %0,%0,-1\n\ + blt- 2f\n" + PPC405_ERR77(0,%1) +" stwcx. %0,0,%1\n\ + bne- 1b" + ISYNC_ON_SMP + "\n\ +2:" : "=&b" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +#define smp_mb__before_atomic_dec() smp_mb() +#define smp_mb__after_atomic_dec() smp_mb() +#define smp_mb__before_atomic_inc() smp_mb() +#define smp_mb__after_atomic_inc() smp_mb() + +#ifdef __powerpc64__ + +typedef struct { long counter; } atomic64_t; + +#define ATOMIC64_INIT(i) { (i) } + +static __inline__ long atomic64_read(const atomic64_t *v) +{ + long t; + + __asm__ __volatile__("ld%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter)); + + return t; +} + +static __inline__ void atomic64_set(atomic64_t *v, long i) +{ + __asm__ __volatile__("std%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i)); +} + +static __inline__ void atomic64_add(long a, atomic64_t *v) +{ + long t; + + __asm__ __volatile__( +"1: ldarx %0,0,%3 # atomic64_add\n\ + add %0,%2,%0\n\ + stdcx. %0,0,%3 \n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (a), "r" (&v->counter) + : "cc"); +} + +static __inline__ long atomic64_add_return(long a, atomic64_t *v) +{ + long t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: ldarx %0,0,%2 # atomic64_add_return\n\ + add %0,%1,%0\n\ + stdcx. %0,0,%2 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (a), "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0) + +static __inline__ void atomic64_sub(long a, atomic64_t *v) +{ + long t; + + __asm__ __volatile__( +"1: ldarx %0,0,%3 # atomic64_sub\n\ + subf %0,%2,%0\n\ + stdcx. %0,0,%3 \n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (a), "r" (&v->counter) + : "cc"); +} + +static __inline__ long atomic64_sub_return(long a, atomic64_t *v) +{ + long t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: ldarx %0,0,%2 # atomic64_sub_return\n\ + subf %0,%1,%0\n\ + stdcx. %0,0,%2 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (a), "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +static __inline__ void atomic64_inc(atomic64_t *v) +{ + long t; + + __asm__ __volatile__( +"1: ldarx %0,0,%2 # atomic64_inc\n\ + addic %0,%0,1\n\ + stdcx. %0,0,%2 \n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc"); +} + +static __inline__ long atomic64_inc_return(atomic64_t *v) +{ + long t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: ldarx %0,0,%1 # atomic64_inc_return\n\ + addic %0,%0,1\n\ + stdcx. %0,0,%1 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +/* + * atomic64_inc_and_test - increment and test + * @v: pointer of type atomic64_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0) + +static __inline__ void atomic64_dec(atomic64_t *v) +{ + long t; + + __asm__ __volatile__( +"1: ldarx %0,0,%2 # atomic64_dec\n\ + addic %0,%0,-1\n\ + stdcx. %0,0,%2\n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc"); +} + +static __inline__ long atomic64_dec_return(atomic64_t *v) +{ + long t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: ldarx %0,0,%1 # atomic64_dec_return\n\ + addic %0,%0,-1\n\ + stdcx. %0,0,%1\n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +#define atomic64_sub_and_test(a, v) (atomic64_sub_return((a), (v)) == 0) +#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) + +/* + * Atomically test *v and decrement if it is greater than 0. + * The function returns the old value of *v minus 1. + */ +static __inline__ long atomic64_dec_if_positive(atomic64_t *v) +{ + long t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: ldarx %0,0,%1 # atomic64_dec_if_positive\n\ + addic. %0,%0,-1\n\ + blt- 2f\n\ + stdcx. %0,0,%1\n\ + bne- 1b" + ISYNC_ON_SMP + "\n\ +2:" : "=&r" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +#define atomic64_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) +#define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) + +/** + * atomic64_add_unless - add unless the number is a given value + * @v: pointer of type atomic64_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) +{ + long t; + + __asm__ __volatile__ ( + LWSYNC_ON_SMP +"1: ldarx %0,0,%1 # atomic_add_unless\n\ + cmpd 0,%0,%3 \n\ + beq- 2f \n\ + add %0,%2,%0 \n" +" stdcx. %0,0,%1 \n\ + bne- 1b \n" + ISYNC_ON_SMP +" subf %0,%2,%0 \n\ +2:" + : "=&r" (t) + : "r" (&v->counter), "r" (a), "r" (u) + : "cc", "memory"); + + return t != u; +} + +#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) + +#endif /* __powerpc64__ */ + +#include +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_ATOMIC_H_ */ diff --git a/arch/powerpc/include/asm/auxvec.h b/arch/powerpc/include/asm/auxvec.h new file mode 100644 index 000000000000..19a099b62cd6 --- /dev/null +++ b/arch/powerpc/include/asm/auxvec.h @@ -0,0 +1,19 @@ +#ifndef _ASM_POWERPC_AUXVEC_H +#define _ASM_POWERPC_AUXVEC_H + +/* + * We need to put in some extra aux table entries to tell glibc what + * the cache block size is, so it can use the dcbz instruction safely. + */ +#define AT_DCACHEBSIZE 19 +#define AT_ICACHEBSIZE 20 +#define AT_UCACHEBSIZE 21 +/* A special ignored type value for PPC, for glibc compatibility. */ +#define AT_IGNOREPPC 22 + +/* The vDSO location. We have to use the same value as x86 for glibc's + * sake :-) + */ +#define AT_SYSINFO_EHDR 33 + +#endif diff --git a/arch/powerpc/include/asm/backlight.h b/arch/powerpc/include/asm/backlight.h new file mode 100644 index 000000000000..8cf5c37c3817 --- /dev/null +++ b/arch/powerpc/include/asm/backlight.h @@ -0,0 +1,41 @@ +/* + * Routines for handling backlight control on PowerBooks + * + * For now, implementation resides in + * arch/powerpc/platforms/powermac/backlight.c + * + */ +#ifndef __ASM_POWERPC_BACKLIGHT_H +#define __ASM_POWERPC_BACKLIGHT_H +#ifdef __KERNEL__ + +#include +#include + +/* For locking instructions, see the implementation file */ +extern struct backlight_device *pmac_backlight; +extern struct mutex pmac_backlight_mutex; + +extern int pmac_backlight_curve_lookup(struct fb_info *info, int value); + +extern int pmac_has_backlight_type(const char *type); + +extern void pmac_backlight_key(int direction); +static inline void pmac_backlight_key_up(void) +{ + pmac_backlight_key(0); +} +static inline void pmac_backlight_key_down(void) +{ + pmac_backlight_key(1); +} + +extern void pmac_backlight_set_legacy_brightness_pmu(int brightness); +extern int pmac_backlight_set_legacy_brightness(int brightness); +extern int pmac_backlight_get_legacy_brightness(void); + +extern void pmac_backlight_enable(void); +extern void pmac_backlight_disable(void); + +#endif /* __KERNEL__ */ +#endif diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h new file mode 100644 index 000000000000..897eade3afbe --- /dev/null +++ b/arch/powerpc/include/asm/bitops.h @@ -0,0 +1,410 @@ +/* + * PowerPC atomic bit operations. + * + * Merged version by David Gibson . + * Based on ppc64 versions by: Dave Engebretsen, Todd Inglett, Don + * Reed, Pat McCarthy, Peter Bergner, Anton Blanchard. They + * originally took it from the ppc32 code. + * + * Within a word, bits are numbered LSB first. Lot's of places make + * this assumption by directly testing bits with (val & (1< 1 word) bitmaps on a + * big-endian system because, unlike little endian, the number of each + * bit depends on the word size. + * + * The bitop functions are defined to work on unsigned longs, so for a + * ppc64 system the bits end up numbered: + * |63..............0|127............64|191...........128|255...........196| + * and on ppc32: + * |31.....0|63....31|95....64|127...96|159..128|191..160|223..192|255..224| + * + * There are a few little-endian macros used mostly for filesystem + * bitmaps, these work on similar bit arrays layouts, but + * byte-oriented: + * |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56| + * + * The main difference is that bit 3-5 (64b) or 3-4 (32b) in the bit + * number field needs to be reversed compared to the big-endian bit + * fields. This can be achieved by XOR with 0x38 (64b) or 0x18 (32b). + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_POWERPC_BITOPS_H +#define _ASM_POWERPC_BITOPS_H + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#include +#include +#include + +/* + * clear_bit doesn't imply a memory barrier + */ +#define smp_mb__before_clear_bit() smp_mb() +#define smp_mb__after_clear_bit() smp_mb() + +#define BITOP_MASK(nr) (1UL << ((nr) % BITS_PER_LONG)) +#define BITOP_WORD(nr) ((nr) / BITS_PER_LONG) +#define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7) + +static __inline__ void set_bit(int nr, volatile unsigned long *addr) +{ + unsigned long old; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%3 # set_bit\n" + "or %0,%0,%2\n" + PPC405_ERR77(0,%3) + PPC_STLCX "%0,0,%3\n" + "bne- 1b" + : "=&r" (old), "+m" (*p) + : "r" (mask), "r" (p) + : "cc" ); +} + +static __inline__ void clear_bit(int nr, volatile unsigned long *addr) +{ + unsigned long old; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%3 # clear_bit\n" + "andc %0,%0,%2\n" + PPC405_ERR77(0,%3) + PPC_STLCX "%0,0,%3\n" + "bne- 1b" + : "=&r" (old), "+m" (*p) + : "r" (mask), "r" (p) + : "cc" ); +} + +static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr) +{ + unsigned long old; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1:" PPC_LLARX "%0,0,%3 # clear_bit_unlock\n" + "andc %0,%0,%2\n" + PPC405_ERR77(0,%3) + PPC_STLCX "%0,0,%3\n" + "bne- 1b" + : "=&r" (old), "+m" (*p) + : "r" (mask), "r" (p) + : "cc", "memory"); +} + +static __inline__ void change_bit(int nr, volatile unsigned long *addr) +{ + unsigned long old; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%3 # change_bit\n" + "xor %0,%0,%2\n" + PPC405_ERR77(0,%3) + PPC_STLCX "%0,0,%3\n" + "bne- 1b" + : "=&r" (old), "+m" (*p) + : "r" (mask), "r" (p) + : "cc" ); +} + +static __inline__ int test_and_set_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long old, t; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1:" PPC_LLARX "%0,0,%3 # test_and_set_bit\n" + "or %1,%0,%2 \n" + PPC405_ERR77(0,%3) + PPC_STLCX "%1,0,%3 \n" + "bne- 1b" + ISYNC_ON_SMP + : "=&r" (old), "=&r" (t) + : "r" (mask), "r" (p) + : "cc", "memory"); + + return (old & mask) != 0; +} + +static __inline__ int test_and_set_bit_lock(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long old, t; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%3 # test_and_set_bit_lock\n" + "or %1,%0,%2 \n" + PPC405_ERR77(0,%3) + PPC_STLCX "%1,0,%3 \n" + "bne- 1b" + ISYNC_ON_SMP + : "=&r" (old), "=&r" (t) + : "r" (mask), "r" (p) + : "cc", "memory"); + + return (old & mask) != 0; +} + +static __inline__ int test_and_clear_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long old, t; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1:" PPC_LLARX "%0,0,%3 # test_and_clear_bit\n" + "andc %1,%0,%2 \n" + PPC405_ERR77(0,%3) + PPC_STLCX "%1,0,%3 \n" + "bne- 1b" + ISYNC_ON_SMP + : "=&r" (old), "=&r" (t) + : "r" (mask), "r" (p) + : "cc", "memory"); + + return (old & mask) != 0; +} + +static __inline__ int test_and_change_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long old, t; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1:" PPC_LLARX "%0,0,%3 # test_and_change_bit\n" + "xor %1,%0,%2 \n" + PPC405_ERR77(0,%3) + PPC_STLCX "%1,0,%3 \n" + "bne- 1b" + ISYNC_ON_SMP + : "=&r" (old), "=&r" (t) + : "r" (mask), "r" (p) + : "cc", "memory"); + + return (old & mask) != 0; +} + +static __inline__ void set_bits(unsigned long mask, unsigned long *addr) +{ + unsigned long old; + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%3 # set_bits\n" + "or %0,%0,%2\n" + PPC_STLCX "%0,0,%3\n" + "bne- 1b" + : "=&r" (old), "+m" (*addr) + : "r" (mask), "r" (addr) + : "cc"); +} + +#include + +static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr) +{ + __asm__ __volatile__(LWSYNC_ON_SMP "" ::: "memory"); + __clear_bit(nr, addr); +} + +/* + * Return the zero-based bit position (LE, not IBM bit numbering) of + * the most significant 1-bit in a double word. + */ +static __inline__ __attribute__((const)) +int __ilog2(unsigned long x) +{ + int lz; + + asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (x)); + return BITS_PER_LONG - 1 - lz; +} + +static inline __attribute__((const)) +int __ilog2_u32(u32 n) +{ + int bit; + asm ("cntlzw %0,%1" : "=r" (bit) : "r" (n)); + return 31 - bit; +} + +#ifdef __powerpc64__ +static inline __attribute__((const)) +int __ilog2_u64(u64 n) +{ + int bit; + asm ("cntlzd %0,%1" : "=r" (bit) : "r" (n)); + return 63 - bit; +} +#endif + +/* + * Determines the bit position of the least significant 0 bit in the + * specified double word. The returned bit position will be + * zero-based, starting from the right side (63/31 - 0). + */ +static __inline__ unsigned long ffz(unsigned long x) +{ + /* no zero exists anywhere in the 8 byte area. */ + if ((x = ~x) == 0) + return BITS_PER_LONG; + + /* + * Calculate the bit position of the least signficant '1' bit in x + * (since x has been changed this will actually be the least signficant + * '0' bit in * the original x). Note: (x & -x) gives us a mask that + * is the least significant * (RIGHT-most) 1-bit of the value in x. + */ + return __ilog2(x & -x); +} + +static __inline__ int __ffs(unsigned long x) +{ + return __ilog2(x & -x); +} + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ +static __inline__ int ffs(int x) +{ + unsigned long i = (unsigned long)x; + return __ilog2(i & -i) + 1; +} + +/* + * fls: find last (most-significant) bit set. + * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. + */ +static __inline__ int fls(unsigned int x) +{ + int lz; + + asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x)); + return 32 - lz; +} + +static __inline__ unsigned long __fls(unsigned long x) +{ + return __ilog2(x); +} + +/* + * 64-bit can do this using one cntlzd (count leading zeroes doubleword) + * instruction; for 32-bit we use the generic version, which does two + * 32-bit fls calls. + */ +#ifdef __powerpc64__ +static __inline__ int fls64(__u64 x) +{ + int lz; + + asm ("cntlzd %0,%1" : "=r" (lz) : "r" (x)); + return 64 - lz; +} +#else +#include +#endif /* __powerpc64__ */ + +#include +#include + +/* Little-endian versions */ + +static __inline__ int test_le_bit(unsigned long nr, + __const__ unsigned long *addr) +{ + __const__ unsigned char *tmp = (__const__ unsigned char *) addr; + return (tmp[nr >> 3] >> (nr & 7)) & 1; +} + +#define __set_le_bit(nr, addr) \ + __set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) +#define __clear_le_bit(nr, addr) \ + __clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) + +#define test_and_set_le_bit(nr, addr) \ + test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) +#define test_and_clear_le_bit(nr, addr) \ + test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) + +#define __test_and_set_le_bit(nr, addr) \ + __test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) +#define __test_and_clear_le_bit(nr, addr) \ + __test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) + +#define find_first_zero_le_bit(addr, size) generic_find_next_zero_le_bit((addr), (size), 0) +unsigned long generic_find_next_zero_le_bit(const unsigned long *addr, + unsigned long size, unsigned long offset); + +unsigned long generic_find_next_le_bit(const unsigned long *addr, + unsigned long size, unsigned long offset); +/* Bitmap functions for the ext2 filesystem */ + +#define ext2_set_bit(nr,addr) \ + __test_and_set_le_bit((nr), (unsigned long*)addr) +#define ext2_clear_bit(nr, addr) \ + __test_and_clear_le_bit((nr), (unsigned long*)addr) + +#define ext2_set_bit_atomic(lock, nr, addr) \ + test_and_set_le_bit((nr), (unsigned long*)addr) +#define ext2_clear_bit_atomic(lock, nr, addr) \ + test_and_clear_le_bit((nr), (unsigned long*)addr) + +#define ext2_test_bit(nr, addr) test_le_bit((nr),(unsigned long*)addr) + +#define ext2_find_first_zero_bit(addr, size) \ + find_first_zero_le_bit((unsigned long*)addr, size) +#define ext2_find_next_zero_bit(addr, size, off) \ + generic_find_next_zero_le_bit((unsigned long*)addr, size, off) + +#define ext2_find_next_bit(addr, size, off) \ + generic_find_next_le_bit((unsigned long *)addr, size, off) +/* Bitmap functions for the minix filesystem. */ + +#define minix_test_and_set_bit(nr,addr) \ + __test_and_set_le_bit(nr, (unsigned long *)addr) +#define minix_set_bit(nr,addr) \ + __set_le_bit(nr, (unsigned long *)addr) +#define minix_test_and_clear_bit(nr,addr) \ + __test_and_clear_le_bit(nr, (unsigned long *)addr) +#define minix_test_bit(nr,addr) \ + test_le_bit(nr, (unsigned long *)addr) + +#define minix_find_first_zero_bit(addr,size) \ + find_first_zero_le_bit((unsigned long *)addr, size) + +#include + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_BITOPS_H */ diff --git a/arch/powerpc/include/asm/bootx.h b/arch/powerpc/include/asm/bootx.h new file mode 100644 index 000000000000..57b82e3f89ce --- /dev/null +++ b/arch/powerpc/include/asm/bootx.h @@ -0,0 +1,171 @@ +/* + * This file describes the structure passed from the BootX application + * (for MacOS) when it is used to boot Linux. + * + * Written by Benjamin Herrenschmidt. + */ + + +#ifndef __ASM_BOOTX_H__ +#define __ASM_BOOTX_H__ + +#include + +#ifdef macintosh +#include +#include "linux_type_defs.h" +#endif + +#ifdef macintosh +/* All this requires PowerPC alignment */ +#pragma options align=power +#endif + +/* On kernel entry: + * + * r3 = 0x426f6f58 ('BooX') + * r4 = pointer to boot_infos + * r5 = NULL + * + * Data and instruction translation disabled, interrupts + * disabled, kernel loaded at physical 0x00000000 on PCI + * machines (will be different on NuBus). + */ + +#define BOOT_INFO_VERSION 5 +#define BOOT_INFO_COMPATIBLE_VERSION 1 + +/* Bit in the architecture flag mask. More to be defined in + future versions. Note that either BOOT_ARCH_PCI or + BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are + set additionally when BOOT_ARCH_NUBUS is set. + */ +#define BOOT_ARCH_PCI 0x00000001UL +#define BOOT_ARCH_NUBUS 0x00000002UL +#define BOOT_ARCH_NUBUS_PDM 0x00000010UL +#define BOOT_ARCH_NUBUS_PERFORMA 0x00000020UL +#define BOOT_ARCH_NUBUS_POWERBOOK 0x00000040UL + +/* Maximum number of ranges in phys memory map */ +#define MAX_MEM_MAP_SIZE 26 + +/* This is the format of an element in the physical memory map. Note that + the map is optional and current BootX will only build it for pre-PCI + machines */ +typedef struct boot_info_map_entry +{ + __u32 physAddr; /* Physical starting address */ + __u32 size; /* Size in bytes */ +} boot_info_map_entry_t; + + +/* Here are the boot informations that are passed to the bootstrap + * Note that the kernel arguments and the device tree are appended + * at the end of this structure. */ +typedef struct boot_infos +{ + /* Version of this structure */ + __u32 version; + /* backward compatible down to version: */ + __u32 compatible_version; + + /* NEW (vers. 2) this holds the current _logical_ base addr of + the frame buffer (for use by early boot message) */ + __u8* logicalDisplayBase; + + /* NEW (vers. 4) Apple's machine identification */ + __u32 machineID; + + /* NEW (vers. 4) Detected hw architecture */ + __u32 architecture; + + /* The device tree (internal addresses relative to the beginning of the tree, + * device tree offset relative to the beginning of this structure). + * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this + * field is 0. + */ + __u32 deviceTreeOffset; /* Device tree offset */ + __u32 deviceTreeSize; /* Size of the device tree */ + + /* Some infos about the current MacOS display */ + __u32 dispDeviceRect[4]; /* left,top,right,bottom */ + __u32 dispDeviceDepth; /* (8, 16 or 32) */ + __u8* dispDeviceBase; /* base address (physical) */ + __u32 dispDeviceRowBytes; /* rowbytes (in bytes) */ + __u32 dispDeviceColorsOffset; /* Colormap (8 bits only) or 0 (*) */ + /* Optional offset in the registry to the current + * MacOS display. (Can be 0 when not detected) */ + __u32 dispDeviceRegEntryOffset; + + /* Optional pointer to boot ramdisk (offset from this structure) */ + __u32 ramDisk; + __u32 ramDiskSize; /* size of ramdisk image */ + + /* Kernel command line arguments (offset from this structure) */ + __u32 kernelParamsOffset; + + /* ALL BELOW NEW (vers. 4) */ + + /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag + (non-PCI) only. On PCI, memory is contiguous and it's size is in the + device-tree. */ + boot_info_map_entry_t + physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */ + __u32 physMemoryMapSize; /* How many entries in map */ + + + /* The framebuffer size (optional, currently 0) */ + __u32 frameBufferSize; /* Represents a max size, can be 0. */ + + /* NEW (vers. 5) */ + + /* Total params size (args + colormap + device tree + ramdisk) */ + __u32 totalParamsSize; + +} boot_infos_t; + +#ifdef __KERNEL__ +/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index + * is represented by 3 short words containing a 16 bits (unsigned) color + * component. Later versions may contain the gamma table for direct-color + * devices here. + */ +#define BOOTX_COLORTABLE_SIZE (256UL*3UL*2UL) + +/* BootX passes the device-tree using a format that comes from earlier + * ppc32 kernels. This used to match what is in prom.h, but not anymore + * so we now define it here + */ +struct bootx_dt_prop { + u32 name; + int length; + u32 value; + u32 next; +}; + +struct bootx_dt_node { + u32 unused0; + u32 unused1; + u32 phandle; /* not really available */ + u32 unused2; + u32 unused3; + u32 unused4; + u32 unused5; + u32 full_name; + u32 properties; + u32 parent; + u32 child; + u32 sibling; + u32 next; + u32 allnext; +}; + +extern void bootx_init(unsigned long r4, unsigned long phys); + +#endif /* __KERNEL__ */ + +#ifdef macintosh +#pragma options align=reset +#endif + +#endif diff --git a/arch/powerpc/include/asm/btext.h b/arch/powerpc/include/asm/btext.h new file mode 100644 index 000000000000..906f46e31006 --- /dev/null +++ b/arch/powerpc/include/asm/btext.h @@ -0,0 +1,28 @@ +/* + * Definitions for using the procedures in btext.c. + * + * Benjamin Herrenschmidt + */ +#ifndef __PPC_BTEXT_H +#define __PPC_BTEXT_H +#ifdef __KERNEL__ + +extern int btext_find_display(int allow_nonstdout); +extern void btext_update_display(unsigned long phys, int width, int height, + int depth, int pitch); +extern void btext_setup_display(int width, int height, int depth, int pitch, + unsigned long address); +extern void btext_prepare_BAT(void); +extern void btext_unmap(void); + +extern void btext_drawchar(char c); +extern void btext_drawstring(const char *str); +extern void btext_drawhex(unsigned long v); +extern void btext_drawtext(const char *c, unsigned int len); + +extern void btext_clearscreen(void); +extern void btext_flushscreen(void); +extern void btext_flushline(void); + +#endif /* __KERNEL__ */ +#endif /* __PPC_BTEXT_H */ diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h new file mode 100644 index 000000000000..e55d1f66b86f --- /dev/null +++ b/arch/powerpc/include/asm/bug.h @@ -0,0 +1,121 @@ +#ifndef _ASM_POWERPC_BUG_H +#define _ASM_POWERPC_BUG_H +#ifdef __KERNEL__ + +#include +/* + * Define an illegal instr to trap on the bug. + * We don't use 0 because that marks the end of a function + * in the ELF ABI. That's "Boo Boo" in case you wonder... + */ +#define BUG_OPCODE .long 0x00b00b00 /* For asm */ +#define BUG_ILLEGAL_INSTR "0x00b00b00" /* For BUG macro */ + +#ifdef CONFIG_BUG + +#ifdef __ASSEMBLY__ +#ifdef CONFIG_DEBUG_BUGVERBOSE +.macro EMIT_BUG_ENTRY addr,file,line,flags + .section __bug_table,"a" +5001: PPC_LONG \addr, 5002f + .short \line, \flags + .org 5001b+BUG_ENTRY_SIZE + .previous + .section .rodata,"a" +5002: .asciz "\file" + .previous +.endm +#else + .macro EMIT_BUG_ENTRY addr,file,line,flags + .section __bug_table,"a" +5001: PPC_LONG \addr + .short \flags + .org 5001b+BUG_ENTRY_SIZE + .previous +.endm +#endif /* verbose */ + +#else /* !__ASSEMBLY__ */ +/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and + sizeof(struct bug_entry), respectively */ +#ifdef CONFIG_DEBUG_BUGVERBOSE +#define _EMIT_BUG_ENTRY \ + ".section __bug_table,\"a\"\n" \ + "2:\t" PPC_LONG "1b, %0\n" \ + "\t.short %1, %2\n" \ + ".org 2b+%3\n" \ + ".previous\n" +#else +#define _EMIT_BUG_ENTRY \ + ".section __bug_table,\"a\"\n" \ + "2:\t" PPC_LONG "1b\n" \ + "\t.short %2\n" \ + ".org 2b+%3\n" \ + ".previous\n" +#endif + +/* + * BUG_ON() and WARN_ON() do their best to cooperate with compile-time + * optimisations. However depending on the complexity of the condition + * some compiler versions may not produce optimal results. + */ + +#define BUG() do { \ + __asm__ __volatile__( \ + "1: twi 31,0,0\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (0), "i" (sizeof(struct bug_entry))); \ + for(;;) ; \ +} while (0) + +#define BUG_ON(x) do { \ + if (__builtin_constant_p(x)) { \ + if (x) \ + BUG(); \ + } else { \ + __asm__ __volatile__( \ + "1: "PPC_TLNEI" %4,0\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), "i" (0), \ + "i" (sizeof(struct bug_entry)), \ + "r" ((__force long)(x))); \ + } \ +} while (0) + +#define __WARN() do { \ + __asm__ __volatile__( \ + "1: twi 31,0,0\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (BUGFLAG_WARNING), \ + "i" (sizeof(struct bug_entry))); \ +} while (0) + +#define WARN_ON(x) ({ \ + int __ret_warn_on = !!(x); \ + if (__builtin_constant_p(__ret_warn_on)) { \ + if (__ret_warn_on) \ + __WARN(); \ + } else { \ + __asm__ __volatile__( \ + "1: "PPC_TLNEI" %4,0\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (BUGFLAG_WARNING), \ + "i" (sizeof(struct bug_entry)), \ + "r" (__ret_warn_on)); \ + } \ + unlikely(__ret_warn_on); \ +}) + +#define HAVE_ARCH_BUG +#define HAVE_ARCH_BUG_ON +#define HAVE_ARCH_WARN_ON +#endif /* __ASSEMBLY __ */ +#endif /* CONFIG_BUG */ + +#include + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_BUG_H */ diff --git a/arch/powerpc/include/asm/bugs.h b/arch/powerpc/include/asm/bugs.h new file mode 100644 index 000000000000..42fdb73e3068 --- /dev/null +++ b/arch/powerpc/include/asm/bugs.h @@ -0,0 +1,18 @@ +#ifndef _ASM_POWERPC_BUGS_H +#define _ASM_POWERPC_BUGS_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* + * This file is included by 'init/main.c' to check for + * architecture-dependent bugs. + */ + +static inline void check_bugs(void) { } + +#endif /* _ASM_POWERPC_BUGS_H */ diff --git a/arch/powerpc/include/asm/byteorder.h b/arch/powerpc/include/asm/byteorder.h new file mode 100644 index 000000000000..b37752214a16 --- /dev/null +++ b/arch/powerpc/include/asm/byteorder.h @@ -0,0 +1,89 @@ +#ifndef _ASM_POWERPC_BYTEORDER_H +#define _ASM_POWERPC_BYTEORDER_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include + +#ifdef __GNUC__ +#ifdef __KERNEL__ + +static __inline__ __u16 ld_le16(const volatile __u16 *addr) +{ + __u16 val; + + __asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr)); + return val; +} + +static __inline__ void st_le16(volatile __u16 *addr, const __u16 val) +{ + __asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr)); +} + +static __inline__ __u32 ld_le32(const volatile __u32 *addr) +{ + __u32 val; + + __asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr)); + return val; +} + +static __inline__ void st_le32(volatile __u32 *addr, const __u32 val) +{ + __asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr)); +} + +static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value) +{ + __u16 result; + + __asm__("rlwimi %0,%1,8,16,23" + : "=r" (result) + : "r" (value), "0" (value >> 8)); + return result; +} + +static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value) +{ + __u32 result; + + __asm__("rlwimi %0,%1,24,16,23\n\t" + "rlwimi %0,%1,8,8,15\n\t" + "rlwimi %0,%1,24,0,7" + : "=r" (result) + : "r" (value), "0" (value >> 24)); + return result; +} + +#define __arch__swab16(x) ___arch__swab16(x) +#define __arch__swab32(x) ___arch__swab32(x) + +/* The same, but returns converted value from the location pointer by addr. */ +#define __arch__swab16p(addr) ld_le16(addr) +#define __arch__swab32p(addr) ld_le32(addr) + +/* The same, but do the conversion in situ, ie. put the value back to addr. */ +#define __arch__swab16s(addr) st_le16(addr,*addr) +#define __arch__swab32s(addr) st_le32(addr,*addr) + +#endif /* __KERNEL__ */ + +#ifndef __STRICT_ANSI__ +#define __BYTEORDER_HAS_U64__ +#ifndef __powerpc64__ +#define __SWAB_64_THRU_32__ +#endif /* __powerpc64__ */ +#endif /* __STRICT_ANSI__ */ + +#endif /* __GNUC__ */ + +#include + +#endif /* _ASM_POWERPC_BYTEORDER_H */ diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h new file mode 100644 index 000000000000..81de6eb3455d --- /dev/null +++ b/arch/powerpc/include/asm/cache.h @@ -0,0 +1,45 @@ +#ifndef _ASM_POWERPC_CACHE_H +#define _ASM_POWERPC_CACHE_H + +#ifdef __KERNEL__ + + +/* bytes per L1 cache line */ +#if defined(CONFIG_8xx) || defined(CONFIG_403GCX) +#define L1_CACHE_SHIFT 4 +#define MAX_COPY_PREFETCH 1 +#elif defined(CONFIG_PPC_E500MC) +#define L1_CACHE_SHIFT 6 +#define MAX_COPY_PREFETCH 4 +#elif defined(CONFIG_PPC32) +#define L1_CACHE_SHIFT 5 +#define MAX_COPY_PREFETCH 4 +#else /* CONFIG_PPC64 */ +#define L1_CACHE_SHIFT 7 +#endif + +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define SMP_CACHE_BYTES L1_CACHE_BYTES + +#if defined(__powerpc64__) && !defined(__ASSEMBLY__) +struct ppc64_caches { + u32 dsize; /* L1 d-cache size */ + u32 dline_size; /* L1 d-cache line size */ + u32 log_dline_size; + u32 dlines_per_page; + u32 isize; /* L1 i-cache size */ + u32 iline_size; /* L1 i-cache line size */ + u32 log_iline_size; + u32 ilines_per_page; +}; + +extern struct ppc64_caches ppc64_caches; +#endif /* __powerpc64__ && ! __ASSEMBLY__ */ + +#if !defined(__ASSEMBLY__) +#define __read_mostly __attribute__((__section__(".data.read_mostly"))) +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_CACHE_H */ diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h new file mode 100644 index 000000000000..ba667a383b8c --- /dev/null +++ b/arch/powerpc/include/asm/cacheflush.h @@ -0,0 +1,75 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_POWERPC_CACHEFLUSH_H +#define _ASM_POWERPC_CACHEFLUSH_H + +#ifdef __KERNEL__ + +#include +#include + +/* + * No cache flushing is required when address mappings are changed, + * because the caches on PowerPCs are physically addressed. + */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_icache_page(vma, page) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +extern void flush_dcache_page(struct page *page); +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +extern void __flush_icache_range(unsigned long, unsigned long); +static inline void flush_icache_range(unsigned long start, unsigned long stop) +{ + if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) + __flush_icache_range(start, stop); +} + +extern void flush_icache_user_range(struct vm_area_struct *vma, + struct page *page, unsigned long addr, + int len); +extern void __flush_dcache_icache(void *page_va); +extern void flush_dcache_icache_page(struct page *page); +#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE) +extern void __flush_dcache_icache_phys(unsigned long physaddr); +#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */ + +extern void flush_dcache_range(unsigned long start, unsigned long stop); +#ifdef CONFIG_PPC32 +extern void clean_dcache_range(unsigned long start, unsigned long stop); +extern void invalidate_dcache_range(unsigned long start, unsigned long stop); +#endif /* CONFIG_PPC32 */ +#ifdef CONFIG_PPC64 +extern void flush_inval_dcache_range(unsigned long start, unsigned long stop); +extern void flush_dcache_phys_range(unsigned long start, unsigned long stop); +#endif + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + memcpy(dst, src, len); \ + flush_icache_user_range(vma, page, vaddr, len); \ + } while (0) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + + + +#ifdef CONFIG_DEBUG_PAGEALLOC +/* internal debugging function */ +void kernel_map_pages(struct page *page, int numpages, int enable); +#endif + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_CACHEFLUSH_H */ diff --git a/arch/powerpc/include/asm/cell-pmu.h b/arch/powerpc/include/asm/cell-pmu.h new file mode 100644 index 000000000000..8066eede3a0c --- /dev/null +++ b/arch/powerpc/include/asm/cell-pmu.h @@ -0,0 +1,105 @@ +/* + * Cell Broadband Engine Performance Monitor + * + * (C) Copyright IBM Corporation 2006 + * + * Author: + * David Erb (djerb@us.ibm.com) + * Kevin Corry (kevcorry@us.ibm.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_CELL_PMU_H__ +#define __ASM_CELL_PMU_H__ + +/* The Cell PMU has four hardware performance counters, which can be + * configured as four 32-bit counters or eight 16-bit counters. + */ +#define NR_PHYS_CTRS 4 +#define NR_CTRS (NR_PHYS_CTRS * 2) + +/* Macros for the pm_control register. */ +#define CBE_PM_16BIT_CTR(ctr) (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1)))) +#define CBE_PM_ENABLE_PERF_MON 0x80000000 +#define CBE_PM_STOP_AT_MAX 0x40000000 +#define CBE_PM_TRACE_MODE_GET(pm_control) (((pm_control) >> 28) & 0x3) +#define CBE_PM_TRACE_MODE_SET(mode) (((mode) & 0x3) << 28) +#define CBE_PM_COUNT_MODE_SET(count) (((count) & 0x3) << 18) +#define CBE_PM_FREEZE_ALL_CTRS 0x00100000 +#define CBE_PM_ENABLE_EXT_TRACE 0x00008000 + +/* Macros for the trace_address register. */ +#define CBE_PM_TRACE_BUF_FULL 0x00000800 +#define CBE_PM_TRACE_BUF_EMPTY 0x00000400 +#define CBE_PM_TRACE_BUF_DATA_COUNT(ta) ((ta) & 0x3ff) +#define CBE_PM_TRACE_BUF_MAX_COUNT 0x400 + +/* Macros for the pm07_control registers. */ +#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f) +#define CBE_PM_CTR_INPUT_CONTROL 0x02000000 +#define CBE_PM_CTR_POLARITY 0x01000000 +#define CBE_PM_CTR_COUNT_CYCLES 0x00800000 +#define CBE_PM_CTR_ENABLE 0x00400000 +#define PM07_CTR_INPUT_MUX(x) (((x) & 0x3F) << 26) +#define PM07_CTR_INPUT_CONTROL(x) (((x) & 1) << 25) +#define PM07_CTR_POLARITY(x) (((x) & 1) << 24) +#define PM07_CTR_COUNT_CYCLES(x) (((x) & 1) << 23) +#define PM07_CTR_ENABLE(x) (((x) & 1) << 22) + +/* Macros for the pm_status register. */ +#define CBE_PM_CTR_OVERFLOW_INTR(ctr) (1 << (31 - ((ctr) & 7))) + +enum pm_reg_name { + group_control, + debug_bus_control, + trace_address, + ext_tr_timer, + pm_status, + pm_control, + pm_interval, + pm_start_stop, +}; + +/* Routines for reading/writing the PMU registers. */ +extern u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr); +extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val); +extern u32 cbe_read_ctr(u32 cpu, u32 ctr); +extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val); + +extern u32 cbe_read_pm07_control(u32 cpu, u32 ctr); +extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val); +extern u32 cbe_read_pm(u32 cpu, enum pm_reg_name reg); +extern void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val); + +extern u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr); +extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size); + +extern void cbe_enable_pm(u32 cpu); +extern void cbe_disable_pm(u32 cpu); + +extern void cbe_read_trace_buffer(u32 cpu, u64 *buf); + +extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); +extern void cbe_disable_pm_interrupts(u32 cpu); +extern u32 cbe_get_and_clear_pm_interrupts(u32 cpu); +extern void cbe_sync_irq(int node); + +#define CBE_COUNT_SUPERVISOR_MODE 0 +#define CBE_COUNT_HYPERVISOR_MODE 1 +#define CBE_COUNT_PROBLEM_MODE 2 +#define CBE_COUNT_ALL_MODES 3 + +#endif /* __ASM_CELL_PMU_H__ */ diff --git a/arch/powerpc/include/asm/cell-regs.h b/arch/powerpc/include/asm/cell-regs.h new file mode 100644 index 000000000000..fd6fd00434ef --- /dev/null +++ b/arch/powerpc/include/asm/cell-regs.h @@ -0,0 +1,315 @@ +/* + * cbe_regs.h + * + * This file is intended to hold the various register definitions for CBE + * on-chip system devices (memory controller, IO controller, etc...) + * + * (C) Copyright IBM Corporation 2001,2006 + * + * Authors: Maximino Aguilar (maguilar@us.ibm.com) + * David J. Erb (djerb@us.ibm.com) + * + * (c) 2006 Benjamin Herrenschmidt , IBM Corp. + */ + +#ifndef CBE_REGS_H +#define CBE_REGS_H + +#include + +/* + * + * Some HID register definitions + * + */ + +/* CBE specific HID0 bits */ +#define HID0_CBE_THERM_WAKEUP 0x0000020000000000ul +#define HID0_CBE_SYSERR_WAKEUP 0x0000008000000000ul +#define HID0_CBE_THERM_INT_EN 0x0000000400000000ul +#define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul + +#define MAX_CBE 2 + +/* + * + * Pervasive unit register definitions + * + */ + +union spe_reg { + u64 val; + u8 spe[8]; +}; + +union ppe_spe_reg { + u64 val; + struct { + u32 ppe; + u32 spe; + }; +}; + + +struct cbe_pmd_regs { + /* Debug Bus Control */ + u64 pad_0x0000; /* 0x0000 */ + + u64 group_control; /* 0x0008 */ + + u8 pad_0x0010_0x00a8 [0x00a8 - 0x0010]; /* 0x0010 */ + + u64 debug_bus_control; /* 0x00a8 */ + + u8 pad_0x00b0_0x0100 [0x0100 - 0x00b0]; /* 0x00b0 */ + + u64 trace_aux_data; /* 0x0100 */ + u64 trace_buffer_0_63; /* 0x0108 */ + u64 trace_buffer_64_127; /* 0x0110 */ + u64 trace_address; /* 0x0118 */ + u64 ext_tr_timer; /* 0x0120 */ + + u8 pad_0x0128_0x0400 [0x0400 - 0x0128]; /* 0x0128 */ + + /* Performance Monitor */ + u64 pm_status; /* 0x0400 */ + u64 pm_control; /* 0x0408 */ + u64 pm_interval; /* 0x0410 */ + u64 pm_ctr[4]; /* 0x0418 */ + u64 pm_start_stop; /* 0x0438 */ + u64 pm07_control[8]; /* 0x0440 */ + + u8 pad_0x0480_0x0800 [0x0800 - 0x0480]; /* 0x0480 */ + + /* Thermal Sensor Registers */ + union spe_reg ts_ctsr1; /* 0x0800 */ + u64 ts_ctsr2; /* 0x0808 */ + union spe_reg ts_mtsr1; /* 0x0810 */ + u64 ts_mtsr2; /* 0x0818 */ + union spe_reg ts_itr1; /* 0x0820 */ + u64 ts_itr2; /* 0x0828 */ + u64 ts_gitr; /* 0x0830 */ + u64 ts_isr; /* 0x0838 */ + u64 ts_imr; /* 0x0840 */ + union spe_reg tm_cr1; /* 0x0848 */ + u64 tm_cr2; /* 0x0850 */ + u64 tm_simr; /* 0x0858 */ + union ppe_spe_reg tm_tpr; /* 0x0860 */ + union spe_reg tm_str1; /* 0x0868 */ + u64 tm_str2; /* 0x0870 */ + union ppe_spe_reg tm_tsr; /* 0x0878 */ + + /* Power Management */ + u64 pmcr; /* 0x0880 */ +#define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000 + u64 pmsr; /* 0x0888 */ + + /* Time Base Register */ + u64 tbr; /* 0x0890 */ + + u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */ + + /* Fault Isolation Registers */ + u64 checkstop_fir; /* 0x0c00 */ + u64 recoverable_fir; /* 0x0c08 */ + u64 spec_att_mchk_fir; /* 0x0c10 */ + u32 fir_mode_reg; /* 0x0c18 */ + u8 pad_0x0c1c_0x0c20 [4]; /* 0x0c1c */ +#define CBE_PMD_FIR_MODE_M8 0x00800 + u64 fir_enable_mask; /* 0x0c20 */ + + u8 pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28]; /* 0x0c28 */ + u64 ras_esc_0; /* 0x0ca8 */ + u8 pad_0x0cb0_0x1000 [0x1000 - 0x0cb0]; /* 0x0cb0 */ +}; + +extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np); +extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu); + +/* + * PMU shadow registers + * + * Many of the registers in the performance monitoring unit are write-only, + * so we need to save a copy of what we write to those registers. + * + * The actual data counters are read/write. However, writing to the counters + * only takes effect if the PMU is enabled. Otherwise the value is stored in + * a hardware latch until the next time the PMU is enabled. So we save a copy + * of the counter values if we need to read them back while the PMU is + * disabled. The counter_value_in_latch field is a bitmap indicating which + * counters currently have a value waiting to be written. + */ + +struct cbe_pmd_shadow_regs { + u32 group_control; + u32 debug_bus_control; + u32 trace_address; + u32 ext_tr_timer; + u32 pm_status; + u32 pm_control; + u32 pm_interval; + u32 pm_start_stop; + u32 pm07_control[NR_CTRS]; + + u32 pm_ctr[NR_PHYS_CTRS]; + u32 counter_value_in_latch; +}; + +extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np); +extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu); + +/* + * + * IIC unit register definitions + * + */ + +struct cbe_iic_pending_bits { + u32 data; + u8 flags; + u8 class; + u8 source; + u8 prio; +}; + +#define CBE_IIC_IRQ_VALID 0x80 +#define CBE_IIC_IRQ_IPI 0x40 + +struct cbe_iic_thread_regs { + struct cbe_iic_pending_bits pending; + struct cbe_iic_pending_bits pending_destr; + u64 generate; + u64 prio; +}; + +struct cbe_iic_regs { + u8 pad_0x0000_0x0400[0x0400 - 0x0000]; /* 0x0000 */ + + /* IIC interrupt registers */ + struct cbe_iic_thread_regs thread[2]; /* 0x0400 */ + + u64 iic_ir; /* 0x0440 */ +#define CBE_IIC_IR_PRIO(x) (((x) & 0xf) << 12) +#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4) +#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf) +#define CBE_IIC_IR_IOC_0 0x0 +#define CBE_IIC_IR_IOC_1S 0xb +#define CBE_IIC_IR_PT_0 0xe +#define CBE_IIC_IR_PT_1 0xf + + u64 iic_is; /* 0x0448 */ +#define CBE_IIC_IS_PMI 0x2 + + u8 pad_0x0450_0x0500[0x0500 - 0x0450]; /* 0x0450 */ + + /* IOC FIR */ + u64 ioc_fir_reset; /* 0x0500 */ + u64 ioc_fir_set; /* 0x0508 */ + u64 ioc_checkstop_enable; /* 0x0510 */ + u64 ioc_fir_error_mask; /* 0x0518 */ + u64 ioc_syserr_enable; /* 0x0520 */ + u64 ioc_fir; /* 0x0528 */ + + u8 pad_0x0530_0x1000[0x1000 - 0x0530]; /* 0x0530 */ +}; + +extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np); +extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu); + + +struct cbe_mic_tm_regs { + u8 pad_0x0000_0x0040[0x0040 - 0x0000]; /* 0x0000 */ + + u64 mic_ctl_cnfg2; /* 0x0040 */ +#define CBE_MIC_ENABLE_AUX_TRC 0x8000000000000000LL +#define CBE_MIC_DISABLE_PWR_SAV_2 0x0200000000000000LL +#define CBE_MIC_DISABLE_AUX_TRC_WRAP 0x0100000000000000LL +#define CBE_MIC_ENABLE_AUX_TRC_INT 0x0080000000000000LL + + u64 pad_0x0048; /* 0x0048 */ + + u64 mic_aux_trc_base; /* 0x0050 */ + u64 mic_aux_trc_max_addr; /* 0x0058 */ + u64 mic_aux_trc_cur_addr; /* 0x0060 */ + u64 mic_aux_trc_grf_addr; /* 0x0068 */ + u64 mic_aux_trc_grf_data; /* 0x0070 */ + + u64 pad_0x0078; /* 0x0078 */ + + u64 mic_ctl_cnfg_0; /* 0x0080 */ +#define CBE_MIC_DISABLE_PWR_SAV_0 0x8000000000000000LL + + u64 pad_0x0088; /* 0x0088 */ + + u64 slow_fast_timer_0; /* 0x0090 */ + u64 slow_next_timer_0; /* 0x0098 */ + + u8 pad_0x00a0_0x00f8[0x00f8 - 0x00a0]; /* 0x00a0 */ + u64 mic_df_ecc_address_0; /* 0x00f8 */ + + u8 pad_0x0100_0x01b8[0x01b8 - 0x0100]; /* 0x0100 */ + u64 mic_df_ecc_address_1; /* 0x01b8 */ + + u64 mic_ctl_cnfg_1; /* 0x01c0 */ +#define CBE_MIC_DISABLE_PWR_SAV_1 0x8000000000000000LL + + u64 pad_0x01c8; /* 0x01c8 */ + + u64 slow_fast_timer_1; /* 0x01d0 */ + u64 slow_next_timer_1; /* 0x01d8 */ + + u8 pad_0x01e0_0x0208[0x0208 - 0x01e0]; /* 0x01e0 */ + u64 mic_exc; /* 0x0208 */ +#define CBE_MIC_EXC_BLOCK_SCRUB 0x0800000000000000ULL +#define CBE_MIC_EXC_FAST_SCRUB 0x0100000000000000ULL + + u64 mic_mnt_cfg; /* 0x0210 */ +#define CBE_MIC_MNT_CFG_CHAN_0_POP 0x0002000000000000ULL +#define CBE_MIC_MNT_CFG_CHAN_1_POP 0x0004000000000000ULL + + u64 mic_df_config; /* 0x0218 */ +#define CBE_MIC_ECC_DISABLE_0 0x4000000000000000ULL +#define CBE_MIC_ECC_REP_SINGLE_0 0x2000000000000000ULL +#define CBE_MIC_ECC_DISABLE_1 0x0080000000000000ULL +#define CBE_MIC_ECC_REP_SINGLE_1 0x0040000000000000ULL + + u8 pad_0x0220_0x0230[0x0230 - 0x0220]; /* 0x0220 */ + u64 mic_fir; /* 0x0230 */ +#define CBE_MIC_FIR_ECC_SINGLE_0_ERR 0x0200000000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_0_ERR 0x0100000000000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_ERR 0x0080000000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_1_ERR 0x0040000000000000ULL +#define CBE_MIC_FIR_ECC_ERR_MASK 0xffff000000000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_0_CTE 0x0000020000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_0_CTE 0x0000010000000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_CTE 0x0000008000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_1_CTE 0x0000004000000000ULL +#define CBE_MIC_FIR_ECC_CTE_MASK 0x0000ffff00000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_0_RESET 0x0000000002000000ULL +#define CBE_MIC_FIR_ECC_MULTI_0_RESET 0x0000000001000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_RESET 0x0000000000800000ULL +#define CBE_MIC_FIR_ECC_MULTI_1_RESET 0x0000000000400000ULL +#define CBE_MIC_FIR_ECC_RESET_MASK 0x00000000ffff0000ULL +#define CBE_MIC_FIR_ECC_SINGLE_0_SET 0x0000000000000200ULL +#define CBE_MIC_FIR_ECC_MULTI_0_SET 0x0000000000000100ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_SET 0x0000000000000080ULL +#define CBE_MIC_FIR_ECC_MULTI_1_SET 0x0000000000000040ULL +#define CBE_MIC_FIR_ECC_SET_MASK 0x000000000000ffffULL + u64 mic_fir_debug; /* 0x0238 */ + + u8 pad_0x0240_0x1000[0x1000 - 0x0240]; /* 0x0240 */ +}; + +extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np); +extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu); + +/* some utility functions to deal with SMT */ +extern u32 cbe_get_hw_thread_id(int cpu); +extern u32 cbe_cpu_to_node(int cpu); +extern u32 cbe_node_to_cpu(int node); + +/* Init this module early */ +extern void cbe_regs_init(void); + + +#endif /* CBE_REGS_H */ diff --git a/arch/powerpc/include/asm/checksum.h b/arch/powerpc/include/asm/checksum.h new file mode 100644 index 000000000000..7cdf358337cf --- /dev/null +++ b/arch/powerpc/include/asm/checksum.h @@ -0,0 +1,117 @@ +#ifndef _ASM_POWERPC_CHECKSUM_H +#define _ASM_POWERPC_CHECKSUM_H +#ifdef __KERNEL__ + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. ihl is the number + * of 32-bit words and is always >= 5. + */ +extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum); + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +extern __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * Computes the checksum of a memory block at src, length len, + * and adds in "sum" (32-bit), while copying the block to dst. + * If an access exception occurs on src or dst, it stores -EFAULT + * to *src_err or *dst_err respectively (if that pointer is not + * NULL), and, for an error on src, zeroes the rest of dst. + * + * Like csum_partial, this must be called with even lengths, + * except for the last fragment. + */ +extern __wsum csum_partial_copy_generic(const void *src, void *dst, + int len, __wsum sum, + int *src_err, int *dst_err); +/* + * the same as csum_partial, but copies from src to dst while it + * checksums. + */ +#define csum_partial_copy_from_user(src, dst, len, sum, errp) \ + csum_partial_copy_generic((__force const void *)(src), (dst), (len), (sum), (errp), NULL) + +#define csum_partial_copy_nocheck(src, dst, len, sum) \ + csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL) + + +/* + * turns a 32-bit partial checksum (e.g. from csum_partial) into a + * 1's complement 16-bit checksum. + */ +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int tmp; + + /* swap the two 16-bit halves of sum */ + __asm__("rlwinm %0,%1,16,0,31" : "=r" (tmp) : "r" (sum)); + /* if there is a carry from adding the two 16-bit halves, + it will carry from the lower half into the upper half, + giving us the correct sum in the upper half. */ + return (__force __sum16)(~((__force u32)sum + tmp) >> 16); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ +#ifdef __powerpc64__ + unsigned long s = (__force u32)sum; + + s += (__force u32)saddr; + s += (__force u32)daddr; + s += proto + len; + s += (s >> 32); + return (__force __wsum) s; +#else + __asm__("\n\ + addc %0,%0,%1 \n\ + adde %0,%0,%2 \n\ + adde %0,%0,%3 \n\ + addze %0,%0 \n\ + " + : "=r" (sum) + : "r" (daddr), "r"(saddr), "r"(proto + len), "0"(sum)); + return sum; +#endif +} +#endif /* __KERNEL__ */ +#endif diff --git a/arch/powerpc/include/asm/clk_interface.h b/arch/powerpc/include/asm/clk_interface.h new file mode 100644 index 000000000000..ab1882c1e176 --- /dev/null +++ b/arch/powerpc/include/asm/clk_interface.h @@ -0,0 +1,20 @@ +#ifndef __ASM_POWERPC_CLK_INTERFACE_H +#define __ASM_POWERPC_CLK_INTERFACE_H + +#include + +struct clk_interface { + struct clk* (*clk_get) (struct device *dev, const char *id); + int (*clk_enable) (struct clk *clk); + void (*clk_disable) (struct clk *clk); + unsigned long (*clk_get_rate) (struct clk *clk); + void (*clk_put) (struct clk *clk); + long (*clk_round_rate) (struct clk *clk, unsigned long rate); + int (*clk_set_rate) (struct clk *clk, unsigned long rate); + int (*clk_set_parent) (struct clk *clk, struct clk *parent); + struct clk* (*clk_get_parent) (struct clk *clk); +}; + +extern struct clk_interface clk_functions; + +#endif /* __ASM_POWERPC_CLK_INTERFACE_H */ diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h new file mode 100644 index 000000000000..107d9b915e33 --- /dev/null +++ b/arch/powerpc/include/asm/code-patching.h @@ -0,0 +1,54 @@ +#ifndef _ASM_POWERPC_CODE_PATCHING_H +#define _ASM_POWERPC_CODE_PATCHING_H + +/* + * Copyright 2008, Michael Ellerman, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +#define PPC_NOP_INSTR 0x60000000 +#define PPC_LWSYNC_INSTR 0x7c2004ac + +/* Flags for create_branch: + * "b" == create_branch(addr, target, 0); + * "ba" == create_branch(addr, target, BRANCH_ABSOLUTE); + * "bl" == create_branch(addr, target, BRANCH_SET_LINK); + * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK); + */ +#define BRANCH_SET_LINK 0x1 +#define BRANCH_ABSOLUTE 0x2 + +unsigned int create_branch(const unsigned int *addr, + unsigned long target, int flags); +unsigned int create_cond_branch(const unsigned int *addr, + unsigned long target, int flags); +void patch_branch(unsigned int *addr, unsigned long target, int flags); +void patch_instruction(unsigned int *addr, unsigned int instr); + +int instr_is_relative_branch(unsigned int instr); +int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr); +unsigned long branch_target(const unsigned int *instr); +unsigned int translate_branch(const unsigned int *dest, + const unsigned int *src); + +static inline unsigned long ppc_function_entry(void *func) +{ +#ifdef CONFIG_PPC64 + /* + * On PPC64 the function pointer actually points to the function's + * descriptor. The first entry in the descriptor is the address + * of the function text. + */ + return ((func_descr_t *)func)->entry; +#else + return (unsigned long)func; +#endif +} + +#endif /* _ASM_POWERPC_CODE_PATCHING_H */ diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h new file mode 100644 index 000000000000..d811a8cd7b58 --- /dev/null +++ b/arch/powerpc/include/asm/compat.h @@ -0,0 +1,214 @@ +#ifndef _ASM_POWERPC_COMPAT_H +#define _ASM_POWERPC_COMPAT_H +#ifdef __KERNEL__ +/* + * Architecture specific compatibility types + */ +#include +#include + +#define COMPAT_USER_HZ 100 + +typedef u32 compat_size_t; +typedef s32 compat_ssize_t; +typedef s32 compat_time_t; +typedef s32 compat_clock_t; +typedef s32 compat_pid_t; +typedef u32 __compat_uid_t; +typedef u32 __compat_gid_t; +typedef u32 __compat_uid32_t; +typedef u32 __compat_gid32_t; +typedef u32 compat_mode_t; +typedef u32 compat_ino_t; +typedef u32 compat_dev_t; +typedef s32 compat_off_t; +typedef s64 compat_loff_t; +typedef s16 compat_nlink_t; +typedef u16 compat_ipc_pid_t; +typedef s32 compat_daddr_t; +typedef u32 compat_caddr_t; +typedef __kernel_fsid_t compat_fsid_t; +typedef s32 compat_key_t; +typedef s32 compat_timer_t; + +typedef s32 compat_int_t; +typedef s32 compat_long_t; +typedef s64 compat_s64; +typedef u32 compat_uint_t; +typedef u32 compat_ulong_t; +typedef u64 compat_u64; + +struct compat_timespec { + compat_time_t tv_sec; + s32 tv_nsec; +}; + +struct compat_timeval { + compat_time_t tv_sec; + s32 tv_usec; +}; + +struct compat_stat { + compat_dev_t st_dev; + compat_ino_t st_ino; + compat_mode_t st_mode; + compat_nlink_t st_nlink; + __compat_uid32_t st_uid; + __compat_gid32_t st_gid; + compat_dev_t st_rdev; + compat_off_t st_size; + compat_off_t st_blksize; + compat_off_t st_blocks; + compat_time_t st_atime; + u32 st_atime_nsec; + compat_time_t st_mtime; + u32 st_mtime_nsec; + compat_time_t st_ctime; + u32 st_ctime_nsec; + u32 __unused4[2]; +}; + +struct compat_flock { + short l_type; + short l_whence; + compat_off_t l_start; + compat_off_t l_len; + compat_pid_t l_pid; +}; + +#define F_GETLK64 12 /* using 'struct flock64' */ +#define F_SETLK64 13 +#define F_SETLKW64 14 + +struct compat_flock64 { + short l_type; + short l_whence; + compat_loff_t l_start; + compat_loff_t l_len; + compat_pid_t l_pid; +}; + +struct compat_statfs { + int f_type; + int f_bsize; + int f_blocks; + int f_bfree; + int f_bavail; + int f_files; + int f_ffree; + compat_fsid_t f_fsid; + int f_namelen; /* SunOS ignores this field. */ + int f_frsize; + int f_spare[5]; +}; + +#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff +#define COMPAT_RLIM_INFINITY 0xffffffff + +typedef u32 compat_old_sigset_t; + +#define _COMPAT_NSIG 64 +#define _COMPAT_NSIG_BPW 32 + +typedef u32 compat_sigset_word; + +#define COMPAT_OFF_T_MAX 0x7fffffff +#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL + +/* + * A pointer passed in from user mode. This should not + * be used for syscall parameters, just declare them + * as pointers because the syscall entry code will have + * appropriately converted them already. + */ +typedef u32 compat_uptr_t; + +static inline void __user *compat_ptr(compat_uptr_t uptr) +{ + return (void __user *)(unsigned long)uptr; +} + +static inline compat_uptr_t ptr_to_compat(void __user *uptr) +{ + return (u32)(unsigned long)uptr; +} + +static inline void __user *compat_alloc_user_space(long len) +{ + struct pt_regs *regs = current->thread.regs; + unsigned long usp = regs->gpr[1]; + + /* + * We cant access below the stack pointer in the 32bit ABI and + * can access 288 bytes in the 64bit ABI + */ + if (!(test_thread_flag(TIF_32BIT))) + usp -= 288; + + return (void __user *) (usp - len); +} + +/* + * ipc64_perm is actually 32/64bit clean but since the compat layer refers to + * it we may as well define it. + */ +struct compat_ipc64_perm { + compat_key_t key; + __compat_uid_t uid; + __compat_gid_t gid; + __compat_uid_t cuid; + __compat_gid_t cgid; + compat_mode_t mode; + unsigned int seq; + unsigned int __pad2; + unsigned long __unused1; /* yes they really are 64bit pads */ + unsigned long __unused2; +}; + +struct compat_semid64_ds { + struct compat_ipc64_perm sem_perm; + unsigned int __unused1; + compat_time_t sem_otime; + unsigned int __unused2; + compat_time_t sem_ctime; + compat_ulong_t sem_nsems; + compat_ulong_t __unused3; + compat_ulong_t __unused4; +}; + +struct compat_msqid64_ds { + struct compat_ipc64_perm msg_perm; + unsigned int __unused1; + compat_time_t msg_stime; + unsigned int __unused2; + compat_time_t msg_rtime; + unsigned int __unused3; + compat_time_t msg_ctime; + compat_ulong_t msg_cbytes; + compat_ulong_t msg_qnum; + compat_ulong_t msg_qbytes; + compat_pid_t msg_lspid; + compat_pid_t msg_lrpid; + compat_ulong_t __unused4; + compat_ulong_t __unused5; +}; + +struct compat_shmid64_ds { + struct compat_ipc64_perm shm_perm; + unsigned int __unused1; + compat_time_t shm_atime; + unsigned int __unused2; + compat_time_t shm_dtime; + unsigned int __unused3; + compat_time_t shm_ctime; + unsigned int __unused4; + compat_size_t shm_segsz; + compat_pid_t shm_cpid; + compat_pid_t shm_lpid; + compat_ulong_t shm_nattch; + compat_ulong_t __unused5; + compat_ulong_t __unused6; +}; + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_COMPAT_H */ diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h new file mode 100644 index 000000000000..24d79e3abd8e --- /dev/null +++ b/arch/powerpc/include/asm/cpm.h @@ -0,0 +1,106 @@ +#ifndef __CPM_H +#define __CPM_H + +#include +#include +#include + +/* Opcodes common to CPM1 and CPM2 +*/ +#define CPM_CR_INIT_TRX ((ushort)0x0000) +#define CPM_CR_INIT_RX ((ushort)0x0001) +#define CPM_CR_INIT_TX ((ushort)0x0002) +#define CPM_CR_HUNT_MODE ((ushort)0x0003) +#define CPM_CR_STOP_TX ((ushort)0x0004) +#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) +#define CPM_CR_RESTART_TX ((ushort)0x0006) +#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007) +#define CPM_CR_SET_GADDR ((ushort)0x0008) +#define CPM_CR_SET_TIMER ((ushort)0x0008) +#define CPM_CR_STOP_IDMA ((ushort)0x000b) + +/* Buffer descriptors used by many of the CPM protocols. */ +typedef struct cpm_buf_desc { + ushort cbd_sc; /* Status and Control */ + ushort cbd_datlen; /* Data length in buffer */ + uint cbd_bufaddr; /* Buffer address in host memory */ +} cbd_t; + +/* Buffer descriptor control/status used by serial + */ + +#define BD_SC_EMPTY (0x8000) /* Receive is empty */ +#define BD_SC_READY (0x8000) /* Transmit is ready */ +#define BD_SC_WRAP (0x2000) /* Last buffer descriptor */ +#define BD_SC_INTRPT (0x1000) /* Interrupt on change */ +#define BD_SC_LAST (0x0800) /* Last buffer in frame */ +#define BD_SC_TC (0x0400) /* Transmit CRC */ +#define BD_SC_CM (0x0200) /* Continous mode */ +#define BD_SC_ID (0x0100) /* Rec'd too many idles */ +#define BD_SC_P (0x0100) /* xmt preamble */ +#define BD_SC_BR (0x0020) /* Break received */ +#define BD_SC_FR (0x0010) /* Framing error */ +#define BD_SC_PR (0x0008) /* Parity error */ +#define BD_SC_NAK (0x0004) /* NAK - did not respond */ +#define BD_SC_OV (0x0002) /* Overrun */ +#define BD_SC_UN (0x0002) /* Underrun */ +#define BD_SC_CD (0x0001) /* */ +#define BD_SC_CL (0x0001) /* Collision */ + +/* Buffer descriptor control/status used by Ethernet receive. + * Common to SCC and FCC. + */ +#define BD_ENET_RX_EMPTY (0x8000) +#define BD_ENET_RX_WRAP (0x2000) +#define BD_ENET_RX_INTR (0x1000) +#define BD_ENET_RX_LAST (0x0800) +#define BD_ENET_RX_FIRST (0x0400) +#define BD_ENET_RX_MISS (0x0100) +#define BD_ENET_RX_BC (0x0080) /* FCC Only */ +#define BD_ENET_RX_MC (0x0040) /* FCC Only */ +#define BD_ENET_RX_LG (0x0020) +#define BD_ENET_RX_NO (0x0010) +#define BD_ENET_RX_SH (0x0008) +#define BD_ENET_RX_CR (0x0004) +#define BD_ENET_RX_OV (0x0002) +#define BD_ENET_RX_CL (0x0001) +#define BD_ENET_RX_STATS (0x01ff) /* All status bits */ + +/* Buffer descriptor control/status used by Ethernet transmit. + * Common to SCC and FCC. + */ +#define BD_ENET_TX_READY (0x8000) +#define BD_ENET_TX_PAD (0x4000) +#define BD_ENET_TX_WRAP (0x2000) +#define BD_ENET_TX_INTR (0x1000) +#define BD_ENET_TX_LAST (0x0800) +#define BD_ENET_TX_TC (0x0400) +#define BD_ENET_TX_DEF (0x0200) +#define BD_ENET_TX_HB (0x0100) +#define BD_ENET_TX_LC (0x0080) +#define BD_ENET_TX_RL (0x0040) +#define BD_ENET_TX_RCMASK (0x003c) +#define BD_ENET_TX_UN (0x0002) +#define BD_ENET_TX_CSL (0x0001) +#define BD_ENET_TX_STATS (0x03ff) /* All status bits */ + +/* Buffer descriptor control/status used by Transparent mode SCC. + */ +#define BD_SCC_TX_LAST (0x0800) + +/* Buffer descriptor control/status used by I2C. + */ +#define BD_I2C_START (0x0400) + +int cpm_muram_init(void); +unsigned long cpm_muram_alloc(unsigned long size, unsigned long align); +int cpm_muram_free(unsigned long offset); +unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size); +void __iomem *cpm_muram_addr(unsigned long offset); +unsigned long cpm_muram_offset(void __iomem *addr); +dma_addr_t cpm_muram_dma(void __iomem *addr); +int cpm_command(u32 command, u8 opcode); + +int cpm2_gpiochip_add32(struct device_node *np); + +#endif diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h new file mode 100644 index 000000000000..2ff798744c1d --- /dev/null +++ b/arch/powerpc/include/asm/cpm1.h @@ -0,0 +1,652 @@ +/* + * MPC8xx Communication Processor Module. + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + * + * This file contains structures and information for the communication + * processor channels. Some CPM control and status is available + * throught the MPC8xx internal memory map. See immap.h for details. + * This file only contains what I need for the moment, not the total + * CPM capabilities. I (or someone else) will add definitions as they + * are needed. -- Dan + * + * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 + * bytes of the DP RAM and relocates the I2C parameter area to the + * IDMA1 space. The remaining DP RAM is available for buffer descriptors + * or other use. + */ +#ifndef __CPM1__ +#define __CPM1__ + +#include +#include +#include + +/* CPM Command register. +*/ +#define CPM_CR_RST ((ushort)0x8000) +#define CPM_CR_OPCODE ((ushort)0x0f00) +#define CPM_CR_CHAN ((ushort)0x00f0) +#define CPM_CR_FLG ((ushort)0x0001) + +/* Channel numbers. +*/ +#define CPM_CR_CH_SCC1 ((ushort)0x0000) +#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */ +#define CPM_CR_CH_SCC2 ((ushort)0x0004) +#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */ +#define CPM_CR_CH_TIMER CPM_CR_CH_SPI +#define CPM_CR_CH_SCC3 ((ushort)0x0008) +#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */ +#define CPM_CR_CH_SCC4 ((ushort)0x000c) +#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */ + +#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) + +/* Export the base address of the communication processor registers + * and dual port ram. + */ +extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */ + +#define cpm_dpalloc cpm_muram_alloc +#define cpm_dpfree cpm_muram_free +#define cpm_dpram_addr cpm_muram_addr +#define cpm_dpram_phys cpm_muram_dma + +extern void cpm_setbrg(uint brg, uint rate); + +extern void cpm_load_patch(cpm8xx_t *cp); + +extern void cpm_reset(void); + +/* Parameter RAM offsets. +*/ +#define PROFF_SCC1 ((uint)0x0000) +#define PROFF_IIC ((uint)0x0080) +#define PROFF_SCC2 ((uint)0x0100) +#define PROFF_SPI ((uint)0x0180) +#define PROFF_SCC3 ((uint)0x0200) +#define PROFF_SMC1 ((uint)0x0280) +#define PROFF_SCC4 ((uint)0x0300) +#define PROFF_SMC2 ((uint)0x0380) + +/* Define enough so I can at least use the serial port as a UART. + * The MBX uses SMC1 as the host serial port. + */ +typedef struct smc_uart { + ushort smc_rbase; /* Rx Buffer descriptor base address */ + ushort smc_tbase; /* Tx Buffer descriptor base address */ + u_char smc_rfcr; /* Rx function code */ + u_char smc_tfcr; /* Tx function code */ + ushort smc_mrblr; /* Max receive buffer length */ + uint smc_rstate; /* Internal */ + uint smc_idp; /* Internal */ + ushort smc_rbptr; /* Internal */ + ushort smc_ibc; /* Internal */ + uint smc_rxtmp; /* Internal */ + uint smc_tstate; /* Internal */ + uint smc_tdp; /* Internal */ + ushort smc_tbptr; /* Internal */ + ushort smc_tbc; /* Internal */ + uint smc_txtmp; /* Internal */ + ushort smc_maxidl; /* Maximum idle characters */ + ushort smc_tmpidl; /* Temporary idle counter */ + ushort smc_brklen; /* Last received break length */ + ushort smc_brkec; /* rcv'd break condition counter */ + ushort smc_brkcr; /* xmt break count register */ + ushort smc_rmask; /* Temporary bit mask */ + char res1[8]; /* Reserved */ + ushort smc_rpbase; /* Relocation pointer */ +} smc_uart_t; + +/* Function code bits. +*/ +#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ + +/* SMC uart mode register. +*/ +#define SMCMR_REN ((ushort)0x0001) +#define SMCMR_TEN ((ushort)0x0002) +#define SMCMR_DM ((ushort)0x000c) +#define SMCMR_SM_GCI ((ushort)0x0000) +#define SMCMR_SM_UART ((ushort)0x0020) +#define SMCMR_SM_TRANS ((ushort)0x0030) +#define SMCMR_SM_MASK ((ushort)0x0030) +#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ +#define SMCMR_REVD SMCMR_PM_EVEN +#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ +#define SMCMR_BS SMCMR_PEN +#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ +#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ +#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) + +/* SMC2 as Centronics parallel printer. It is half duplex, in that + * it can only receive or transmit. The parameter ram values for + * each direction are either unique or properly overlap, so we can + * include them in one structure. + */ +typedef struct smc_centronics { + ushort scent_rbase; + ushort scent_tbase; + u_char scent_cfcr; + u_char scent_smask; + ushort scent_mrblr; + uint scent_rstate; + uint scent_r_ptr; + ushort scent_rbptr; + ushort scent_r_cnt; + uint scent_rtemp; + uint scent_tstate; + uint scent_t_ptr; + ushort scent_tbptr; + ushort scent_t_cnt; + uint scent_ttemp; + ushort scent_max_sl; + ushort scent_sl_cnt; + ushort scent_character1; + ushort scent_character2; + ushort scent_character3; + ushort scent_character4; + ushort scent_character5; + ushort scent_character6; + ushort scent_character7; + ushort scent_character8; + ushort scent_rccm; + ushort scent_rccr; +} smc_cent_t; + +/* Centronics Status Mask Register. +*/ +#define SMC_CENT_F ((u_char)0x08) +#define SMC_CENT_PE ((u_char)0x04) +#define SMC_CENT_S ((u_char)0x02) + +/* SMC Event and Mask register. +*/ +#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ +#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ +#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ +#define SMCM_BSY ((unsigned char)0x04) +#define SMCM_TX ((unsigned char)0x02) +#define SMCM_RX ((unsigned char)0x01) + +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +/* SI Clock Route Register +*/ +#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000) +#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000) +#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800) +#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100) +#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000) +#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000) +#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000) +#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000) + +/* SCCs. +*/ +#define SCC_GSMRH_IRP ((uint)0x00040000) +#define SCC_GSMRH_GDE ((uint)0x00010000) +#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) +#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) +#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) +#define SCC_GSMRH_REVD ((uint)0x00002000) +#define SCC_GSMRH_TRX ((uint)0x00001000) +#define SCC_GSMRH_TTX ((uint)0x00000800) +#define SCC_GSMRH_CDP ((uint)0x00000400) +#define SCC_GSMRH_CTSP ((uint)0x00000200) +#define SCC_GSMRH_CDS ((uint)0x00000100) +#define SCC_GSMRH_CTSS ((uint)0x00000080) +#define SCC_GSMRH_TFL ((uint)0x00000040) +#define SCC_GSMRH_RFW ((uint)0x00000020) +#define SCC_GSMRH_TXSY ((uint)0x00000010) +#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) +#define SCC_GSMRH_SYNL8 ((uint)0x00000008) +#define SCC_GSMRH_SYNL4 ((uint)0x00000004) +#define SCC_GSMRH_RTSM ((uint)0x00000002) +#define SCC_GSMRH_RSYN ((uint)0x00000001) + +#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ +#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) +#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) +#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) +#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) +#define SCC_GSMRL_TCI ((uint)0x10000000) +#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) +#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) +#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) +#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) +#define SCC_GSMRL_RINV ((uint)0x02000000) +#define SCC_GSMRL_TINV ((uint)0x01000000) +#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) +#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) +#define SCC_GSMRL_TPL_48 ((uint)0x00800000) +#define SCC_GSMRL_TPL_32 ((uint)0x00600000) +#define SCC_GSMRL_TPL_16 ((uint)0x00400000) +#define SCC_GSMRL_TPL_8 ((uint)0x00200000) +#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) +#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) +#define SCC_GSMRL_TPP_01 ((uint)0x00100000) +#define SCC_GSMRL_TPP_10 ((uint)0x00080000) +#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) +#define SCC_GSMRL_TEND ((uint)0x00040000) +#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) +#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) +#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) +#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) +#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) +#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) +#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) +#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) +#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) +#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) +#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) +#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) +#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) +#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) +#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ +#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) +#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) +#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) +#define SCC_GSMRL_ENR ((uint)0x00000020) +#define SCC_GSMRL_ENT ((uint)0x00000010) +#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) +#define SCC_GSMRL_MODE_QMC ((uint)0x0000000a) +#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) +#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) +#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) +#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) +#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) +#define SCC_GSMRL_MODE_UART ((uint)0x00000004) +#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) +#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) +#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) + +#define SCC_TODR_TOD ((ushort)0x8000) + +/* SCC Event and Mask register. +*/ +#define SCCM_TXE ((unsigned char)0x10) +#define SCCM_BSY ((unsigned char)0x04) +#define SCCM_TX ((unsigned char)0x02) +#define SCCM_RX ((unsigned char)0x01) + +typedef struct scc_param { + ushort scc_rbase; /* Rx Buffer descriptor base address */ + ushort scc_tbase; /* Tx Buffer descriptor base address */ + u_char scc_rfcr; /* Rx function code */ + u_char scc_tfcr; /* Tx function code */ + ushort scc_mrblr; /* Max receive buffer length */ + uint scc_rstate; /* Internal */ + uint scc_idp; /* Internal */ + ushort scc_rbptr; /* Internal */ + ushort scc_ibc; /* Internal */ + uint scc_rxtmp; /* Internal */ + uint scc_tstate; /* Internal */ + uint scc_tdp; /* Internal */ + ushort scc_tbptr; /* Internal */ + ushort scc_tbc; /* Internal */ + uint scc_txtmp; /* Internal */ + uint scc_rcrc; /* Internal */ + uint scc_tcrc; /* Internal */ +} sccp_t; + +/* Function code bits. +*/ +#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ + +/* CPM Ethernet through SCCx. + */ +typedef struct scc_enet { + sccp_t sen_genscc; + uint sen_cpres; /* Preset CRC */ + uint sen_cmask; /* Constant mask for CRC */ + uint sen_crcec; /* CRC Error counter */ + uint sen_alec; /* alignment error counter */ + uint sen_disfc; /* discard frame counter */ + ushort sen_pads; /* Tx short frame pad character */ + ushort sen_retlim; /* Retry limit threshold */ + ushort sen_retcnt; /* Retry limit counter */ + ushort sen_maxflr; /* maximum frame length register */ + ushort sen_minflr; /* minimum frame length register */ + ushort sen_maxd1; /* maximum DMA1 length */ + ushort sen_maxd2; /* maximum DMA2 length */ + ushort sen_maxd; /* Rx max DMA */ + ushort sen_dmacnt; /* Rx DMA counter */ + ushort sen_maxb; /* Max BD byte count */ + ushort sen_gaddr1; /* Group address filter */ + ushort sen_gaddr2; + ushort sen_gaddr3; + ushort sen_gaddr4; + uint sen_tbuf0data0; /* Save area 0 - current frame */ + uint sen_tbuf0data1; /* Save area 1 - current frame */ + uint sen_tbuf0rba; /* Internal */ + uint sen_tbuf0crc; /* Internal */ + ushort sen_tbuf0bcnt; /* Internal */ + ushort sen_paddrh; /* physical address (MSB) */ + ushort sen_paddrm; + ushort sen_paddrl; /* physical address (LSB) */ + ushort sen_pper; /* persistence */ + ushort sen_rfbdptr; /* Rx first BD pointer */ + ushort sen_tfbdptr; /* Tx first BD pointer */ + ushort sen_tlbdptr; /* Tx last BD pointer */ + uint sen_tbuf1data0; /* Save area 0 - current frame */ + uint sen_tbuf1data1; /* Save area 1 - current frame */ + uint sen_tbuf1rba; /* Internal */ + uint sen_tbuf1crc; /* Internal */ + ushort sen_tbuf1bcnt; /* Internal */ + ushort sen_txlen; /* Tx Frame length counter */ + ushort sen_iaddr1; /* Individual address filter */ + ushort sen_iaddr2; + ushort sen_iaddr3; + ushort sen_iaddr4; + ushort sen_boffcnt; /* Backoff counter */ + + /* NOTE: Some versions of the manual have the following items + * incorrectly documented. Below is the proper order. + */ + ushort sen_taddrh; /* temp address (MSB) */ + ushort sen_taddrm; + ushort sen_taddrl; /* temp address (LSB) */ +} scc_enet_t; + +/* SCC Event register as used by Ethernet. +*/ +#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ +#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* SCC Mode Register (PMSR) as used by Ethernet. +*/ +#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ +#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ +#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ +#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ +#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ +#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ +#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ +#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ +#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ +#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ +#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ +#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ +#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ + +/* SCC as UART +*/ +typedef struct scc_uart { + sccp_t scc_genscc; + char res1[8]; /* Reserved */ + ushort scc_maxidl; /* Maximum idle chars */ + ushort scc_idlc; /* temp idle counter */ + ushort scc_brkcr; /* Break count register */ + ushort scc_parec; /* receive parity error counter */ + ushort scc_frmec; /* receive framing error counter */ + ushort scc_nosec; /* receive noise counter */ + ushort scc_brkec; /* receive break condition counter */ + ushort scc_brkln; /* last received break length */ + ushort scc_uaddr1; /* UART address character 1 */ + ushort scc_uaddr2; /* UART address character 2 */ + ushort scc_rtemp; /* Temp storage */ + ushort scc_toseq; /* Transmit out of sequence char */ + ushort scc_char1; /* control character 1 */ + ushort scc_char2; /* control character 2 */ + ushort scc_char3; /* control character 3 */ + ushort scc_char4; /* control character 4 */ + ushort scc_char5; /* control character 5 */ + ushort scc_char6; /* control character 6 */ + ushort scc_char7; /* control character 7 */ + ushort scc_char8; /* control character 8 */ + ushort scc_rccm; /* receive control character mask */ + ushort scc_rccr; /* receive control character register */ + ushort scc_rlbc; /* receive last break character */ +} scc_uart_t; + +/* SCC Event and Mask registers when it is used as a UART. +*/ +#define UART_SCCM_GLR ((ushort)0x1000) +#define UART_SCCM_GLT ((ushort)0x0800) +#define UART_SCCM_AB ((ushort)0x0200) +#define UART_SCCM_IDL ((ushort)0x0100) +#define UART_SCCM_GRA ((ushort)0x0080) +#define UART_SCCM_BRKE ((ushort)0x0040) +#define UART_SCCM_BRKS ((ushort)0x0020) +#define UART_SCCM_CCR ((ushort)0x0008) +#define UART_SCCM_BSY ((ushort)0x0004) +#define UART_SCCM_TX ((ushort)0x0002) +#define UART_SCCM_RX ((ushort)0x0001) + +/* The SCC PMSR when used as a UART. +*/ +#define SCU_PSMR_FLC ((ushort)0x8000) +#define SCU_PSMR_SL ((ushort)0x4000) +#define SCU_PSMR_CL ((ushort)0x3000) +#define SCU_PSMR_UM ((ushort)0x0c00) +#define SCU_PSMR_FRZ ((ushort)0x0200) +#define SCU_PSMR_RZS ((ushort)0x0100) +#define SCU_PSMR_SYN ((ushort)0x0080) +#define SCU_PSMR_DRT ((ushort)0x0040) +#define SCU_PSMR_PEN ((ushort)0x0010) +#define SCU_PSMR_RPM ((ushort)0x000c) +#define SCU_PSMR_REVP ((ushort)0x0008) +#define SCU_PSMR_TPM ((ushort)0x0003) +#define SCU_PSMR_TEVP ((ushort)0x0002) + +/* CPM Transparent mode SCC. + */ +typedef struct scc_trans { + sccp_t st_genscc; + uint st_cpres; /* Preset CRC */ + uint st_cmask; /* Constant mask for CRC */ +} scc_trans_t; + +/* IIC parameter RAM. +*/ +typedef struct iic { + ushort iic_rbase; /* Rx Buffer descriptor base address */ + ushort iic_tbase; /* Tx Buffer descriptor base address */ + u_char iic_rfcr; /* Rx function code */ + u_char iic_tfcr; /* Tx function code */ + ushort iic_mrblr; /* Max receive buffer length */ + uint iic_rstate; /* Internal */ + uint iic_rdp; /* Internal */ + ushort iic_rbptr; /* Internal */ + ushort iic_rbc; /* Internal */ + uint iic_rxtmp; /* Internal */ + uint iic_tstate; /* Internal */ + uint iic_tdp; /* Internal */ + ushort iic_tbptr; /* Internal */ + ushort iic_tbc; /* Internal */ + uint iic_txtmp; /* Internal */ + char res1[4]; /* Reserved */ + ushort iic_rpbase; /* Relocation pointer */ + char res2[2]; /* Reserved */ +} iic_t; + +/* SPI parameter RAM. +*/ +typedef struct spi { + ushort spi_rbase; /* Rx Buffer descriptor base address */ + ushort spi_tbase; /* Tx Buffer descriptor base address */ + u_char spi_rfcr; /* Rx function code */ + u_char spi_tfcr; /* Tx function code */ + ushort spi_mrblr; /* Max receive buffer length */ + uint spi_rstate; /* Internal */ + uint spi_rdp; /* Internal */ + ushort spi_rbptr; /* Internal */ + ushort spi_rbc; /* Internal */ + uint spi_rxtmp; /* Internal */ + uint spi_tstate; /* Internal */ + uint spi_tdp; /* Internal */ + ushort spi_tbptr; /* Internal */ + ushort spi_tbc; /* Internal */ + uint spi_txtmp; /* Internal */ + uint spi_res; + ushort spi_rpbase; /* Relocation pointer */ + ushort spi_res2; +} spi_t; + +/* SPI Mode register. +*/ +#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ +#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ +#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ +#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ +#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ +#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ +#define SPMODE_EN ((ushort)0x0100) /* Enable */ +#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ +#define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */ +#define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */ +#define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */ +#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ + +/* SPIE fields */ +#define SPIE_MME 0x20 +#define SPIE_TXE 0x10 +#define SPIE_BSY 0x04 +#define SPIE_TXB 0x02 +#define SPIE_RXB 0x01 + +/* + * RISC Controller Configuration Register definitons + */ +#define RCCR_TIME 0x8000 /* RISC Timer Enable */ +#define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */ +#define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */ + +/* RISC Timer Parameter RAM offset */ +#define PROFF_RTMR ((uint)0x01B0) + +typedef struct risc_timer_pram { + unsigned short tm_base; /* RISC Timer Table Base Address */ + unsigned short tm_ptr; /* RISC Timer Table Pointer (internal) */ + unsigned short r_tmr; /* RISC Timer Mode Register */ + unsigned short r_tmv; /* RISC Timer Valid Register */ + unsigned long tm_cmd; /* RISC Timer Command Register */ + unsigned long tm_cnt; /* RISC Timer Internal Count */ +} rt_pram_t; + +/* Bits in RISC Timer Command Register */ +#define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */ +#define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */ +#define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */ +#define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */ +#define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */ + +/* CPM interrupts. There are nearly 32 interrupts generated by CPM + * channels or devices. All of these are presented to the PPC core + * as a single interrupt. The CPM interrupt handler dispatches its + * own handlers, in a similar fashion to the PPC core handler. We + * use the table as defined in the manuals (i.e. no special high + * priority and SCC1 == SCCa, etc...). + */ +#define CPMVEC_NR 32 +#define CPMVEC_PIO_PC15 ((ushort)0x1f) +#define CPMVEC_SCC1 ((ushort)0x1e) +#define CPMVEC_SCC2 ((ushort)0x1d) +#define CPMVEC_SCC3 ((ushort)0x1c) +#define CPMVEC_SCC4 ((ushort)0x1b) +#define CPMVEC_PIO_PC14 ((ushort)0x1a) +#define CPMVEC_TIMER1 ((ushort)0x19) +#define CPMVEC_PIO_PC13 ((ushort)0x18) +#define CPMVEC_PIO_PC12 ((ushort)0x17) +#define CPMVEC_SDMA_CB_ERR ((ushort)0x16) +#define CPMVEC_IDMA1 ((ushort)0x15) +#define CPMVEC_IDMA2 ((ushort)0x14) +#define CPMVEC_TIMER2 ((ushort)0x12) +#define CPMVEC_RISCTIMER ((ushort)0x11) +#define CPMVEC_I2C ((ushort)0x10) +#define CPMVEC_PIO_PC11 ((ushort)0x0f) +#define CPMVEC_PIO_PC10 ((ushort)0x0e) +#define CPMVEC_TIMER3 ((ushort)0x0c) +#define CPMVEC_PIO_PC9 ((ushort)0x0b) +#define CPMVEC_PIO_PC8 ((ushort)0x0a) +#define CPMVEC_PIO_PC7 ((ushort)0x09) +#define CPMVEC_TIMER4 ((ushort)0x07) +#define CPMVEC_PIO_PC6 ((ushort)0x06) +#define CPMVEC_SPI ((ushort)0x05) +#define CPMVEC_SMC1 ((ushort)0x04) +#define CPMVEC_SMC2 ((ushort)0x03) +#define CPMVEC_PIO_PC5 ((ushort)0x02) +#define CPMVEC_PIO_PC4 ((ushort)0x01) +#define CPMVEC_ERROR ((ushort)0x00) + +/* CPM interrupt configuration vector. +*/ +#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ +#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ +#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ +#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ +#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ +#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ +#define CICR_IEN ((uint)0x00000080) /* Int. enable */ +#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ + +#define IMAP_ADDR (get_immrbase()) + +#define CPM_PIN_INPUT 0 +#define CPM_PIN_OUTPUT 1 +#define CPM_PIN_PRIMARY 0 +#define CPM_PIN_SECONDARY 2 +#define CPM_PIN_GPIO 4 +#define CPM_PIN_OPENDRAIN 8 + +enum cpm_port { + CPM_PORTA, + CPM_PORTB, + CPM_PORTC, + CPM_PORTD, + CPM_PORTE, +}; + +void cpm1_set_pin(enum cpm_port port, int pin, int flags); + +enum cpm_clk_dir { + CPM_CLK_RX, + CPM_CLK_TX, + CPM_CLK_RTX +}; + +enum cpm_clk_target { + CPM_CLK_SCC1, + CPM_CLK_SCC2, + CPM_CLK_SCC3, + CPM_CLK_SCC4, + CPM_CLK_SMC1, + CPM_CLK_SMC2, +}; + +enum cpm_clk { + CPM_BRG1, /* Baud Rate Generator 1 */ + CPM_BRG2, /* Baud Rate Generator 2 */ + CPM_BRG3, /* Baud Rate Generator 3 */ + CPM_BRG4, /* Baud Rate Generator 4 */ + CPM_CLK1, /* Clock 1 */ + CPM_CLK2, /* Clock 2 */ + CPM_CLK3, /* Clock 3 */ + CPM_CLK4, /* Clock 4 */ + CPM_CLK5, /* Clock 5 */ + CPM_CLK6, /* Clock 6 */ + CPM_CLK7, /* Clock 7 */ + CPM_CLK8, /* Clock 8 */ +}; + +int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode); + +#endif /* __CPM1__ */ diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h new file mode 100644 index 000000000000..2a6fa0183ac9 --- /dev/null +++ b/arch/powerpc/include/asm/cpm2.h @@ -0,0 +1,1195 @@ +/* + * Communication Processor Module v2. + * + * This file contains structures and information for the communication + * processor channels found in the dual port RAM or parameter RAM. + * All CPM control and status is available through the CPM2 internal + * memory map. See immap_cpm2.h for details. + */ +#ifdef __KERNEL__ +#ifndef __CPM2__ +#define __CPM2__ + +#include +#include +#include + +#ifdef CONFIG_PPC_85xx +#define CPM_MAP_ADDR (get_immrbase() + 0x80000) +#endif + +/* CPM Command register. +*/ +#define CPM_CR_RST ((uint)0x80000000) +#define CPM_CR_PAGE ((uint)0x7c000000) +#define CPM_CR_SBLOCK ((uint)0x03e00000) +#define CPM_CR_FLG ((uint)0x00010000) +#define CPM_CR_MCN ((uint)0x00003fc0) +#define CPM_CR_OPCODE ((uint)0x0000000f) + +/* Device sub-block and page codes. +*/ +#define CPM_CR_SCC1_SBLOCK (0x04) +#define CPM_CR_SCC2_SBLOCK (0x05) +#define CPM_CR_SCC3_SBLOCK (0x06) +#define CPM_CR_SCC4_SBLOCK (0x07) +#define CPM_CR_SMC1_SBLOCK (0x08) +#define CPM_CR_SMC2_SBLOCK (0x09) +#define CPM_CR_SPI_SBLOCK (0x0a) +#define CPM_CR_I2C_SBLOCK (0x0b) +#define CPM_CR_TIMER_SBLOCK (0x0f) +#define CPM_CR_RAND_SBLOCK (0x0e) +#define CPM_CR_FCC1_SBLOCK (0x10) +#define CPM_CR_FCC2_SBLOCK (0x11) +#define CPM_CR_FCC3_SBLOCK (0x12) +#define CPM_CR_IDMA1_SBLOCK (0x14) +#define CPM_CR_IDMA2_SBLOCK (0x15) +#define CPM_CR_IDMA3_SBLOCK (0x16) +#define CPM_CR_IDMA4_SBLOCK (0x17) +#define CPM_CR_MCC1_SBLOCK (0x1c) + +#define CPM_CR_FCC_SBLOCK(x) (x + 0x10) + +#define CPM_CR_SCC1_PAGE (0x00) +#define CPM_CR_SCC2_PAGE (0x01) +#define CPM_CR_SCC3_PAGE (0x02) +#define CPM_CR_SCC4_PAGE (0x03) +#define CPM_CR_SMC1_PAGE (0x07) +#define CPM_CR_SMC2_PAGE (0x08) +#define CPM_CR_SPI_PAGE (0x09) +#define CPM_CR_I2C_PAGE (0x0a) +#define CPM_CR_TIMER_PAGE (0x0a) +#define CPM_CR_RAND_PAGE (0x0a) +#define CPM_CR_FCC1_PAGE (0x04) +#define CPM_CR_FCC2_PAGE (0x05) +#define CPM_CR_FCC3_PAGE (0x06) +#define CPM_CR_IDMA1_PAGE (0x07) +#define CPM_CR_IDMA2_PAGE (0x08) +#define CPM_CR_IDMA3_PAGE (0x09) +#define CPM_CR_IDMA4_PAGE (0x0a) +#define CPM_CR_MCC1_PAGE (0x07) +#define CPM_CR_MCC2_PAGE (0x08) + +#define CPM_CR_FCC_PAGE(x) (x + 0x04) + +/* CPM2-specific opcodes (see cpm.h for common opcodes) +*/ +#define CPM_CR_START_IDMA ((ushort)0x0009) + +#define mk_cr_cmd(PG, SBC, MCN, OP) \ + ((PG << 26) | (SBC << 21) | (MCN << 6) | OP) + +/* The number of pages of host memory we allocate for CPM. This is + * done early in kernel initialization to get physically contiguous + * pages. + */ +#define NUM_CPM_HOST_PAGES 2 + +/* Export the base address of the communication processor registers + * and dual port ram. + */ +extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */ + +#define cpm_dpalloc cpm_muram_alloc +#define cpm_dpfree cpm_muram_free +#define cpm_dpram_addr cpm_muram_addr + +extern void cpm2_reset(void); + +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +#define CPM2_BRG_INT_CLK (get_brgfreq()) +#define CPM2_BRG_UART_CLK (CPM2_BRG_INT_CLK/16) + +extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src); + +/* This function is used by UARTS, or anything else that uses a 16x + * oversampled clock. + */ +static inline void cpm_setbrg(uint brg, uint rate) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT); +} + +/* This function is used to set high speed synchronous baud rate + * clocks. + */ +static inline void cpm2_fastbrg(uint brg, uint rate, int div16) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT); +} + +/* Function code bits, usually generic to devices. +*/ +#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ +#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */ +#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */ +#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */ +#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */ + +/* Parameter RAM offsets from the base. +*/ +#define PROFF_SCC1 ((uint)0x8000) +#define PROFF_SCC2 ((uint)0x8100) +#define PROFF_SCC3 ((uint)0x8200) +#define PROFF_SCC4 ((uint)0x8300) +#define PROFF_FCC1 ((uint)0x8400) +#define PROFF_FCC2 ((uint)0x8500) +#define PROFF_FCC3 ((uint)0x8600) +#define PROFF_MCC1 ((uint)0x8700) +#define PROFF_SMC1_BASE ((uint)0x87fc) +#define PROFF_IDMA1_BASE ((uint)0x87fe) +#define PROFF_MCC2 ((uint)0x8800) +#define PROFF_SMC2_BASE ((uint)0x88fc) +#define PROFF_IDMA2_BASE ((uint)0x88fe) +#define PROFF_SPI_BASE ((uint)0x89fc) +#define PROFF_IDMA3_BASE ((uint)0x89fe) +#define PROFF_TIMERS ((uint)0x8ae0) +#define PROFF_REVNUM ((uint)0x8af0) +#define PROFF_RAND ((uint)0x8af8) +#define PROFF_I2C_BASE ((uint)0x8afc) +#define PROFF_IDMA4_BASE ((uint)0x8afe) + +#define PROFF_SCC_SIZE ((uint)0x100) +#define PROFF_FCC_SIZE ((uint)0x100) +#define PROFF_SMC_SIZE ((uint)64) + +/* The SMCs are relocated to any of the first eight DPRAM pages. + * We will fix these at the first locations of DPRAM, until we + * get some microcode patches :-). + * The parameter ram space for the SMCs is fifty-some bytes, and + * they are required to start on a 64 byte boundary. + */ +#define PROFF_SMC1 (0) +#define PROFF_SMC2 (64) + + +/* Define enough so I can at least use the serial port as a UART. + */ +typedef struct smc_uart { + ushort smc_rbase; /* Rx Buffer descriptor base address */ + ushort smc_tbase; /* Tx Buffer descriptor base address */ + u_char smc_rfcr; /* Rx function code */ + u_char smc_tfcr; /* Tx function code */ + ushort smc_mrblr; /* Max receive buffer length */ + uint smc_rstate; /* Internal */ + uint smc_idp; /* Internal */ + ushort smc_rbptr; /* Internal */ + ushort smc_ibc; /* Internal */ + uint smc_rxtmp; /* Internal */ + uint smc_tstate; /* Internal */ + uint smc_tdp; /* Internal */ + ushort smc_tbptr; /* Internal */ + ushort smc_tbc; /* Internal */ + uint smc_txtmp; /* Internal */ + ushort smc_maxidl; /* Maximum idle characters */ + ushort smc_tmpidl; /* Temporary idle counter */ + ushort smc_brklen; /* Last received break length */ + ushort smc_brkec; /* rcv'd break condition counter */ + ushort smc_brkcr; /* xmt break count register */ + ushort smc_rmask; /* Temporary bit mask */ + uint smc_stmp; /* SDMA Temp */ +} smc_uart_t; + +/* SMC uart mode register (Internal memory map). +*/ +#define SMCMR_REN ((ushort)0x0001) +#define SMCMR_TEN ((ushort)0x0002) +#define SMCMR_DM ((ushort)0x000c) +#define SMCMR_SM_GCI ((ushort)0x0000) +#define SMCMR_SM_UART ((ushort)0x0020) +#define SMCMR_SM_TRANS ((ushort)0x0030) +#define SMCMR_SM_MASK ((ushort)0x0030) +#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ +#define SMCMR_REVD SMCMR_PM_EVEN +#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ +#define SMCMR_BS SMCMR_PEN +#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ +#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ +#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) + +/* SMC Event and Mask register. +*/ +#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ +#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ +#define SMCM_TXE ((unsigned char)0x10) +#define SMCM_BSY ((unsigned char)0x04) +#define SMCM_TX ((unsigned char)0x02) +#define SMCM_RX ((unsigned char)0x01) + +/* SCCs. +*/ +#define SCC_GSMRH_IRP ((uint)0x00040000) +#define SCC_GSMRH_GDE ((uint)0x00010000) +#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) +#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) +#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) +#define SCC_GSMRH_REVD ((uint)0x00002000) +#define SCC_GSMRH_TRX ((uint)0x00001000) +#define SCC_GSMRH_TTX ((uint)0x00000800) +#define SCC_GSMRH_CDP ((uint)0x00000400) +#define SCC_GSMRH_CTSP ((uint)0x00000200) +#define SCC_GSMRH_CDS ((uint)0x00000100) +#define SCC_GSMRH_CTSS ((uint)0x00000080) +#define SCC_GSMRH_TFL ((uint)0x00000040) +#define SCC_GSMRH_RFW ((uint)0x00000020) +#define SCC_GSMRH_TXSY ((uint)0x00000010) +#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) +#define SCC_GSMRH_SYNL8 ((uint)0x00000008) +#define SCC_GSMRH_SYNL4 ((uint)0x00000004) +#define SCC_GSMRH_RTSM ((uint)0x00000002) +#define SCC_GSMRH_RSYN ((uint)0x00000001) + +#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ +#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) +#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) +#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) +#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) +#define SCC_GSMRL_TCI ((uint)0x10000000) +#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) +#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) +#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) +#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) +#define SCC_GSMRL_RINV ((uint)0x02000000) +#define SCC_GSMRL_TINV ((uint)0x01000000) +#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) +#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) +#define SCC_GSMRL_TPL_48 ((uint)0x00800000) +#define SCC_GSMRL_TPL_32 ((uint)0x00600000) +#define SCC_GSMRL_TPL_16 ((uint)0x00400000) +#define SCC_GSMRL_TPL_8 ((uint)0x00200000) +#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) +#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) +#define SCC_GSMRL_TPP_01 ((uint)0x00100000) +#define SCC_GSMRL_TPP_10 ((uint)0x00080000) +#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) +#define SCC_GSMRL_TEND ((uint)0x00040000) +#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) +#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) +#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) +#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) +#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) +#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) +#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) +#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) +#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) +#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) +#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) +#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) +#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) +#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) +#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ +#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) +#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) +#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) +#define SCC_GSMRL_ENR ((uint)0x00000020) +#define SCC_GSMRL_ENT ((uint)0x00000010) +#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) +#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) +#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) +#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) +#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) +#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) +#define SCC_GSMRL_MODE_UART ((uint)0x00000004) +#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) +#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) +#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) + +#define SCC_TODR_TOD ((ushort)0x8000) + +/* SCC Event and Mask register. +*/ +#define SCCM_TXE ((unsigned char)0x10) +#define SCCM_BSY ((unsigned char)0x04) +#define SCCM_TX ((unsigned char)0x02) +#define SCCM_RX ((unsigned char)0x01) + +typedef struct scc_param { + ushort scc_rbase; /* Rx Buffer descriptor base address */ + ushort scc_tbase; /* Tx Buffer descriptor base address */ + u_char scc_rfcr; /* Rx function code */ + u_char scc_tfcr; /* Tx function code */ + ushort scc_mrblr; /* Max receive buffer length */ + uint scc_rstate; /* Internal */ + uint scc_idp; /* Internal */ + ushort scc_rbptr; /* Internal */ + ushort scc_ibc; /* Internal */ + uint scc_rxtmp; /* Internal */ + uint scc_tstate; /* Internal */ + uint scc_tdp; /* Internal */ + ushort scc_tbptr; /* Internal */ + ushort scc_tbc; /* Internal */ + uint scc_txtmp; /* Internal */ + uint scc_rcrc; /* Internal */ + uint scc_tcrc; /* Internal */ +} sccp_t; + +/* CPM Ethernet through SCC1. + */ +typedef struct scc_enet { + sccp_t sen_genscc; + uint sen_cpres; /* Preset CRC */ + uint sen_cmask; /* Constant mask for CRC */ + uint sen_crcec; /* CRC Error counter */ + uint sen_alec; /* alignment error counter */ + uint sen_disfc; /* discard frame counter */ + ushort sen_pads; /* Tx short frame pad character */ + ushort sen_retlim; /* Retry limit threshold */ + ushort sen_retcnt; /* Retry limit counter */ + ushort sen_maxflr; /* maximum frame length register */ + ushort sen_minflr; /* minimum frame length register */ + ushort sen_maxd1; /* maximum DMA1 length */ + ushort sen_maxd2; /* maximum DMA2 length */ + ushort sen_maxd; /* Rx max DMA */ + ushort sen_dmacnt; /* Rx DMA counter */ + ushort sen_maxb; /* Max BD byte count */ + ushort sen_gaddr1; /* Group address filter */ + ushort sen_gaddr2; + ushort sen_gaddr3; + ushort sen_gaddr4; + uint sen_tbuf0data0; /* Save area 0 - current frame */ + uint sen_tbuf0data1; /* Save area 1 - current frame */ + uint sen_tbuf0rba; /* Internal */ + uint sen_tbuf0crc; /* Internal */ + ushort sen_tbuf0bcnt; /* Internal */ + ushort sen_paddrh; /* physical address (MSB) */ + ushort sen_paddrm; + ushort sen_paddrl; /* physical address (LSB) */ + ushort sen_pper; /* persistence */ + ushort sen_rfbdptr; /* Rx first BD pointer */ + ushort sen_tfbdptr; /* Tx first BD pointer */ + ushort sen_tlbdptr; /* Tx last BD pointer */ + uint sen_tbuf1data0; /* Save area 0 - current frame */ + uint sen_tbuf1data1; /* Save area 1 - current frame */ + uint sen_tbuf1rba; /* Internal */ + uint sen_tbuf1crc; /* Internal */ + ushort sen_tbuf1bcnt; /* Internal */ + ushort sen_txlen; /* Tx Frame length counter */ + ushort sen_iaddr1; /* Individual address filter */ + ushort sen_iaddr2; + ushort sen_iaddr3; + ushort sen_iaddr4; + ushort sen_boffcnt; /* Backoff counter */ + + /* NOTE: Some versions of the manual have the following items + * incorrectly documented. Below is the proper order. + */ + ushort sen_taddrh; /* temp address (MSB) */ + ushort sen_taddrm; + ushort sen_taddrl; /* temp address (LSB) */ +} scc_enet_t; + + +/* SCC Event register as used by Ethernet. +*/ +#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ +#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* SCC Mode Register (PSMR) as used by Ethernet. +*/ +#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ +#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ +#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ +#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ +#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ +#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ +#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ +#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ +#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ +#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ +#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ +#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ +#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ + +/* SCC as UART +*/ +typedef struct scc_uart { + sccp_t scc_genscc; + uint scc_res1; /* Reserved */ + uint scc_res2; /* Reserved */ + ushort scc_maxidl; /* Maximum idle chars */ + ushort scc_idlc; /* temp idle counter */ + ushort scc_brkcr; /* Break count register */ + ushort scc_parec; /* receive parity error counter */ + ushort scc_frmec; /* receive framing error counter */ + ushort scc_nosec; /* receive noise counter */ + ushort scc_brkec; /* receive break condition counter */ + ushort scc_brkln; /* last received break length */ + ushort scc_uaddr1; /* UART address character 1 */ + ushort scc_uaddr2; /* UART address character 2 */ + ushort scc_rtemp; /* Temp storage */ + ushort scc_toseq; /* Transmit out of sequence char */ + ushort scc_char1; /* control character 1 */ + ushort scc_char2; /* control character 2 */ + ushort scc_char3; /* control character 3 */ + ushort scc_char4; /* control character 4 */ + ushort scc_char5; /* control character 5 */ + ushort scc_char6; /* control character 6 */ + ushort scc_char7; /* control character 7 */ + ushort scc_char8; /* control character 8 */ + ushort scc_rccm; /* receive control character mask */ + ushort scc_rccr; /* receive control character register */ + ushort scc_rlbc; /* receive last break character */ +} scc_uart_t; + +/* SCC Event and Mask registers when it is used as a UART. +*/ +#define UART_SCCM_GLR ((ushort)0x1000) +#define UART_SCCM_GLT ((ushort)0x0800) +#define UART_SCCM_AB ((ushort)0x0200) +#define UART_SCCM_IDL ((ushort)0x0100) +#define UART_SCCM_GRA ((ushort)0x0080) +#define UART_SCCM_BRKE ((ushort)0x0040) +#define UART_SCCM_BRKS ((ushort)0x0020) +#define UART_SCCM_CCR ((ushort)0x0008) +#define UART_SCCM_BSY ((ushort)0x0004) +#define UART_SCCM_TX ((ushort)0x0002) +#define UART_SCCM_RX ((ushort)0x0001) + +/* The SCC PSMR when used as a UART. +*/ +#define SCU_PSMR_FLC ((ushort)0x8000) +#define SCU_PSMR_SL ((ushort)0x4000) +#define SCU_PSMR_CL ((ushort)0x3000) +#define SCU_PSMR_UM ((ushort)0x0c00) +#define SCU_PSMR_FRZ ((ushort)0x0200) +#define SCU_PSMR_RZS ((ushort)0x0100) +#define SCU_PSMR_SYN ((ushort)0x0080) +#define SCU_PSMR_DRT ((ushort)0x0040) +#define SCU_PSMR_PEN ((ushort)0x0010) +#define SCU_PSMR_RPM ((ushort)0x000c) +#define SCU_PSMR_REVP ((ushort)0x0008) +#define SCU_PSMR_TPM ((ushort)0x0003) +#define SCU_PSMR_TEVP ((ushort)0x0002) + +/* CPM Transparent mode SCC. + */ +typedef struct scc_trans { + sccp_t st_genscc; + uint st_cpres; /* Preset CRC */ + uint st_cmask; /* Constant mask for CRC */ +} scc_trans_t; + +/* How about some FCCs..... +*/ +#define FCC_GFMR_DIAG_NORM ((uint)0x00000000) +#define FCC_GFMR_DIAG_LE ((uint)0x40000000) +#define FCC_GFMR_DIAG_AE ((uint)0x80000000) +#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000) +#define FCC_GFMR_TCI ((uint)0x20000000) +#define FCC_GFMR_TRX ((uint)0x10000000) +#define FCC_GFMR_TTX ((uint)0x08000000) +#define FCC_GFMR_TTX ((uint)0x08000000) +#define FCC_GFMR_CDP ((uint)0x04000000) +#define FCC_GFMR_CTSP ((uint)0x02000000) +#define FCC_GFMR_CDS ((uint)0x01000000) +#define FCC_GFMR_CTSS ((uint)0x00800000) +#define FCC_GFMR_SYNL_NONE ((uint)0x00000000) +#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000) +#define FCC_GFMR_SYNL_8 ((uint)0x00008000) +#define FCC_GFMR_SYNL_16 ((uint)0x0000c000) +#define FCC_GFMR_RTSM ((uint)0x00002000) +#define FCC_GFMR_RENC_NRZ ((uint)0x00000000) +#define FCC_GFMR_RENC_NRZI ((uint)0x00000800) +#define FCC_GFMR_REVD ((uint)0x00000400) +#define FCC_GFMR_TENC_NRZ ((uint)0x00000000) +#define FCC_GFMR_TENC_NRZI ((uint)0x00000100) +#define FCC_GFMR_TCRC_16 ((uint)0x00000000) +#define FCC_GFMR_TCRC_32 ((uint)0x00000080) +#define FCC_GFMR_ENR ((uint)0x00000020) +#define FCC_GFMR_ENT ((uint)0x00000010) +#define FCC_GFMR_MODE_ENET ((uint)0x0000000c) +#define FCC_GFMR_MODE_ATM ((uint)0x0000000a) +#define FCC_GFMR_MODE_HDLC ((uint)0x00000000) + +/* Generic FCC parameter ram. +*/ +typedef struct fcc_param { + ushort fcc_riptr; /* Rx Internal temp pointer */ + ushort fcc_tiptr; /* Tx Internal temp pointer */ + ushort fcc_res1; + ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */ + uint fcc_rstate; /* Upper byte is Func code, must be set */ + uint fcc_rbase; /* Receive BD base */ + ushort fcc_rbdstat; /* RxBD status */ + ushort fcc_rbdlen; /* RxBD down counter */ + uint fcc_rdptr; /* RxBD internal data pointer */ + uint fcc_tstate; /* Upper byte is Func code, must be set */ + uint fcc_tbase; /* Transmit BD base */ + ushort fcc_tbdstat; /* TxBD status */ + ushort fcc_tbdlen; /* TxBD down counter */ + uint fcc_tdptr; /* TxBD internal data pointer */ + uint fcc_rbptr; /* Rx BD Internal buf pointer */ + uint fcc_tbptr; /* Tx BD Internal buf pointer */ + uint fcc_rcrc; /* Rx temp CRC */ + uint fcc_res2; + uint fcc_tcrc; /* Tx temp CRC */ +} fccp_t; + + +/* Ethernet controller through FCC. +*/ +typedef struct fcc_enet { + fccp_t fen_genfcc; + uint fen_statbuf; /* Internal status buffer */ + uint fen_camptr; /* CAM address */ + uint fen_cmask; /* Constant mask for CRC */ + uint fen_cpres; /* Preset CRC */ + uint fen_crcec; /* CRC Error counter */ + uint fen_alec; /* alignment error counter */ + uint fen_disfc; /* discard frame counter */ + ushort fen_retlim; /* Retry limit */ + ushort fen_retcnt; /* Retry counter */ + ushort fen_pper; /* Persistence */ + ushort fen_boffcnt; /* backoff counter */ + uint fen_gaddrh; /* Group address filter, high 32-bits */ + uint fen_gaddrl; /* Group address filter, low 32-bits */ + ushort fen_tfcstat; /* out of sequence TxBD */ + ushort fen_tfclen; + uint fen_tfcptr; + ushort fen_mflr; /* Maximum frame length (1518) */ + ushort fen_paddrh; /* MAC address */ + ushort fen_paddrm; + ushort fen_paddrl; + ushort fen_ibdcount; /* Internal BD counter */ + ushort fen_ibdstart; /* Internal BD start pointer */ + ushort fen_ibdend; /* Internal BD end pointer */ + ushort fen_txlen; /* Internal Tx frame length counter */ + uint fen_ibdbase[8]; /* Internal use */ + uint fen_iaddrh; /* Individual address filter */ + uint fen_iaddrl; + ushort fen_minflr; /* Minimum frame length (64) */ + ushort fen_taddrh; /* Filter transfer MAC address */ + ushort fen_taddrm; + ushort fen_taddrl; + ushort fen_padptr; /* Pointer to pad byte buffer */ + ushort fen_cftype; /* control frame type */ + ushort fen_cfrange; /* control frame range */ + ushort fen_maxb; /* maximum BD count */ + ushort fen_maxd1; /* Max DMA1 length (1520) */ + ushort fen_maxd2; /* Max DMA2 length (1520) */ + ushort fen_maxd; /* internal max DMA count */ + ushort fen_dmacnt; /* internal DMA counter */ + uint fen_octc; /* Total octect counter */ + uint fen_colc; /* Total collision counter */ + uint fen_broc; /* Total broadcast packet counter */ + uint fen_mulc; /* Total multicast packet count */ + uint fen_uspc; /* Total packets < 64 bytes */ + uint fen_frgc; /* Total packets < 64 bytes with errors */ + uint fen_ospc; /* Total packets > 1518 */ + uint fen_jbrc; /* Total packets > 1518 with errors */ + uint fen_p64c; /* Total packets == 64 bytes */ + uint fen_p65c; /* Total packets 64 < bytes <= 127 */ + uint fen_p128c; /* Total packets 127 < bytes <= 255 */ + uint fen_p256c; /* Total packets 256 < bytes <= 511 */ + uint fen_p512c; /* Total packets 512 < bytes <= 1023 */ + uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */ + uint fen_cambuf; /* Internal CAM buffer poiner */ + ushort fen_rfthr; /* Received frames threshold */ + ushort fen_rfcnt; /* Received frames count */ +} fcc_enet_t; + +/* FCC Event/Mask register as used by Ethernet. +*/ +#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */ +#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */ +#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */ +#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* FCC Mode Register (FPSMR) as used by Ethernet. +*/ +#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */ +#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */ +#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */ +#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */ +#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */ +#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */ +#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */ +#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */ +#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */ +#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */ +#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */ +#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */ +#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */ + +/* IIC parameter RAM. +*/ +typedef struct iic { + ushort iic_rbase; /* Rx Buffer descriptor base address */ + ushort iic_tbase; /* Tx Buffer descriptor base address */ + u_char iic_rfcr; /* Rx function code */ + u_char iic_tfcr; /* Tx function code */ + ushort iic_mrblr; /* Max receive buffer length */ + uint iic_rstate; /* Internal */ + uint iic_rdp; /* Internal */ + ushort iic_rbptr; /* Internal */ + ushort iic_rbc; /* Internal */ + uint iic_rxtmp; /* Internal */ + uint iic_tstate; /* Internal */ + uint iic_tdp; /* Internal */ + ushort iic_tbptr; /* Internal */ + ushort iic_tbc; /* Internal */ + uint iic_txtmp; /* Internal */ +} iic_t; + +/* SPI parameter RAM. +*/ +typedef struct spi { + ushort spi_rbase; /* Rx Buffer descriptor base address */ + ushort spi_tbase; /* Tx Buffer descriptor base address */ + u_char spi_rfcr; /* Rx function code */ + u_char spi_tfcr; /* Tx function code */ + ushort spi_mrblr; /* Max receive buffer length */ + uint spi_rstate; /* Internal */ + uint spi_rdp; /* Internal */ + ushort spi_rbptr; /* Internal */ + ushort spi_rbc; /* Internal */ + uint spi_rxtmp; /* Internal */ + uint spi_tstate; /* Internal */ + uint spi_tdp; /* Internal */ + ushort spi_tbptr; /* Internal */ + ushort spi_tbc; /* Internal */ + uint spi_txtmp; /* Internal */ + uint spi_res; /* Tx temp. */ + uint spi_res1[4]; /* SDMA temp. */ +} spi_t; + +/* SPI Mode register. +*/ +#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ +#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ +#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ +#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ +#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ +#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ +#define SPMODE_EN ((ushort)0x0100) /* Enable */ +#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ +#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ + +#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4) +#define SPMODE_PM(x) ((x) &0xF) + +#define SPI_EB ((u_char)0x10) /* big endian byte order */ + +/* IDMA parameter RAM +*/ +typedef struct idma { + ushort ibase; /* IDMA buffer descriptor table base address */ + ushort dcm; /* DMA channel mode */ + ushort ibdptr; /* IDMA current buffer descriptor pointer */ + ushort dpr_buf; /* IDMA transfer buffer base address */ + ushort buf_inv; /* internal buffer inventory */ + ushort ss_max; /* steady-state maximum transfer size */ + ushort dpr_in_ptr; /* write pointer inside the internal buffer */ + ushort sts; /* source transfer size */ + ushort dpr_out_ptr; /* read pointer inside the internal buffer */ + ushort seob; /* source end of burst */ + ushort deob; /* destination end of burst */ + ushort dts; /* destination transfer size */ + ushort ret_add; /* return address when working in ERM=1 mode */ + ushort res0; /* reserved */ + uint bd_cnt; /* internal byte count */ + uint s_ptr; /* source internal data pointer */ + uint d_ptr; /* destination internal data pointer */ + uint istate; /* internal state */ + u_char res1[20]; /* pad to 64-byte length */ +} idma_t; + +/* DMA channel mode bit fields +*/ +#define IDMA_DCM_FB ((ushort)0x8000) /* fly-by mode */ +#define IDMA_DCM_LP ((ushort)0x4000) /* low priority */ +#define IDMA_DCM_TC2 ((ushort)0x0400) /* value driven on TC[2] */ +#define IDMA_DCM_DMA_WRAP_MASK ((ushort)0x01c0) /* mask for DMA wrap */ +#define IDMA_DCM_DMA_WRAP_64 ((ushort)0x0000) /* 64-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_128 ((ushort)0x0040) /* 128-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_256 ((ushort)0x0080) /* 256-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_512 ((ushort)0x00c0) /* 512-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_1024 ((ushort)0x0100) /* 1024-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_2048 ((ushort)0x0140) /* 2048-byte DMA xfer buffer */ +#define IDMA_DCM_SINC ((ushort)0x0020) /* source inc addr */ +#define IDMA_DCM_DINC ((ushort)0x0010) /* destination inc addr */ +#define IDMA_DCM_ERM ((ushort)0x0008) /* external request mode */ +#define IDMA_DCM_DT ((ushort)0x0004) /* DONE treatment */ +#define IDMA_DCM_SD_MASK ((ushort)0x0003) /* mask for SD bit field */ +#define IDMA_DCM_SD_MEM2MEM ((ushort)0x0000) /* memory-to-memory xfer */ +#define IDMA_DCM_SD_PER2MEM ((ushort)0x0002) /* peripheral-to-memory xfer */ +#define IDMA_DCM_SD_MEM2PER ((ushort)0x0001) /* memory-to-peripheral xfer */ + +/* IDMA Buffer Descriptors +*/ +typedef struct idma_bd { + uint flags; + uint len; /* data length */ + uint src; /* source data buffer pointer */ + uint dst; /* destination data buffer pointer */ +} idma_bd_t; + +/* IDMA buffer descriptor flag bit fields +*/ +#define IDMA_BD_V ((uint)0x80000000) /* valid */ +#define IDMA_BD_W ((uint)0x20000000) /* wrap */ +#define IDMA_BD_I ((uint)0x10000000) /* interrupt */ +#define IDMA_BD_L ((uint)0x08000000) /* last */ +#define IDMA_BD_CM ((uint)0x02000000) /* continuous mode */ +#define IDMA_BD_SDN ((uint)0x00400000) /* source done */ +#define IDMA_BD_DDN ((uint)0x00200000) /* destination done */ +#define IDMA_BD_DGBL ((uint)0x00100000) /* destination global */ +#define IDMA_BD_DBO_LE ((uint)0x00040000) /* little-end dest byte order */ +#define IDMA_BD_DBO_BE ((uint)0x00080000) /* big-end dest byte order */ +#define IDMA_BD_DDTB ((uint)0x00010000) /* destination data bus */ +#define IDMA_BD_SGBL ((uint)0x00002000) /* source global */ +#define IDMA_BD_SBO_LE ((uint)0x00000800) /* little-end src byte order */ +#define IDMA_BD_SBO_BE ((uint)0x00001000) /* big-end src byte order */ +#define IDMA_BD_SDTB ((uint)0x00000200) /* source data bus */ + +/* per-channel IDMA registers +*/ +typedef struct im_idma { + u_char idsr; /* IDMAn event status register */ + u_char res0[3]; + u_char idmr; /* IDMAn event mask register */ + u_char res1[3]; +} im_idma_t; + +/* IDMA event register bit fields +*/ +#define IDMA_EVENT_SC ((unsigned char)0x08) /* stop completed */ +#define IDMA_EVENT_OB ((unsigned char)0x04) /* out of buffers */ +#define IDMA_EVENT_EDN ((unsigned char)0x02) /* external DONE asserted */ +#define IDMA_EVENT_BC ((unsigned char)0x01) /* buffer descriptor complete */ + +/* RISC Controller Configuration Register (RCCR) bit fields +*/ +#define RCCR_TIME ((uint)0x80000000) /* timer enable */ +#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */ +#define RCCR_DR0M ((uint)0x00800000) /* IDMA0 request mode */ +#define RCCR_DR1M ((uint)0x00400000) /* IDMA1 request mode */ +#define RCCR_DR2M ((uint)0x00000080) /* IDMA2 request mode */ +#define RCCR_DR3M ((uint)0x00000040) /* IDMA3 request mode */ +#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */ +#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */ +#define RCCR_DR0QP_MED ((uint)0x00100000) /* IDMA0 has medium req priority */ +#define RCCR_DR0QP_LOW ((uint)0x00200000) /* IDMA0 has low req priority */ +#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */ +#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */ +#define RCCR_DR1QP_MED ((uint)0x00010000) /* IDMA1 has medium req priority */ +#define RCCR_DR1QP_LOW ((uint)0x00020000) /* IDMA1 has low req priority */ +#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */ +#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */ +#define RCCR_DR2QP_MED ((uint)0x00000010) /* IDMA2 has medium req priority */ +#define RCCR_DR2QP_LOW ((uint)0x00000020) /* IDMA2 has low req priority */ +#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */ +#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */ +#define RCCR_DR3QP_MED ((uint)0x00000001) /* IDMA3 has medium req priority */ +#define RCCR_DR3QP_LOW ((uint)0x00000002) /* IDMA3 has low req priority */ +#define RCCR_EIE ((uint)0x00080000) /* external interrupt enable */ +#define RCCR_SCD ((uint)0x00040000) /* scheduler configuration */ +#define RCCR_ERAM_MASK ((uint)0x0000e000) /* mask for enable RAM microcode */ +#define RCCR_ERAM_0KB ((uint)0x00000000) /* use 0KB of dpram for microcode */ +#define RCCR_ERAM_2KB ((uint)0x00002000) /* use 2KB of dpram for microcode */ +#define RCCR_ERAM_4KB ((uint)0x00004000) /* use 4KB of dpram for microcode */ +#define RCCR_ERAM_6KB ((uint)0x00006000) /* use 6KB of dpram for microcode */ +#define RCCR_ERAM_8KB ((uint)0x00008000) /* use 8KB of dpram for microcode */ +#define RCCR_ERAM_10KB ((uint)0x0000a000) /* use 10KB of dpram for microcode */ +#define RCCR_ERAM_12KB ((uint)0x0000c000) /* use 12KB of dpram for microcode */ +#define RCCR_EDM0 ((uint)0x00000800) /* DREQ0 edge detect mode */ +#define RCCR_EDM1 ((uint)0x00000400) /* DREQ1 edge detect mode */ +#define RCCR_EDM2 ((uint)0x00000200) /* DREQ2 edge detect mode */ +#define RCCR_EDM3 ((uint)0x00000100) /* DREQ3 edge detect mode */ +#define RCCR_DEM01 ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */ +#define RCCR_DEM23 ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */ + +/*----------------------------------------------------------------------- + * CMXFCR - CMX FCC Clock Route Register + */ +#define CMXFCR_FC1 0x40000000 /* FCC1 connection */ +#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */ +#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */ +#define CMXFCR_FC2 0x00400000 /* FCC2 connection */ +#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */ +#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */ +#define CMXFCR_FC3 0x00004000 /* FCC3 connection */ +#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */ +#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */ + +#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */ +#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */ +#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */ +#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */ +#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */ +#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */ +#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */ +#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */ + +#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */ +#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */ +#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */ +#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */ +#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */ +#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */ +#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */ +#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */ + +#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */ +#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */ +#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */ +#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */ +#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */ +#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */ +#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */ +#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */ + +#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */ +#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */ +#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */ +#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */ +#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */ +#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */ +#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */ +#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */ + +#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */ +#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */ +#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */ +#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */ +#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */ +#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */ +#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */ +#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */ + +#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */ +#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */ +#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */ +#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */ +#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */ +#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */ +#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */ +#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */ + +/*----------------------------------------------------------------------- + * CMXSCR - CMX SCC Clock Route Register + */ +#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */ +#define CMXSCR_SC1 0x40000000 /* SCC1 connection */ +#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */ +#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */ +#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */ +#define CMXSCR_SC2 0x00400000 /* SCC2 connection */ +#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */ +#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */ +#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */ +#define CMXSCR_SC3 0x00004000 /* SCC3 connection */ +#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */ +#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */ +#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */ +#define CMXSCR_SC4 0x00000040 /* SCC4 connection */ +#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */ +#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */ + +#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */ +#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */ +#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */ +#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */ +#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */ +#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */ +#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */ +#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */ + +#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */ +#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */ +#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */ +#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */ +#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */ +#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */ +#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */ +#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */ + +#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */ +#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */ +#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */ +#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */ +#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */ +#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */ +#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */ +#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */ + +#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */ +#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */ +#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */ +#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */ +#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */ +#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */ +#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */ +#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */ + +#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */ +#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */ +#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */ +#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */ +#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */ +#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */ +#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */ +#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */ + +#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */ +#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */ +#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */ +#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */ +#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */ +#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */ +#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */ +#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */ + +#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */ +#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */ +#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */ +#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */ +#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */ +#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */ +#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */ +#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */ + +#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */ +#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */ +#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */ +#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */ +#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */ +#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */ +#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */ +#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */ + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration Register 4-31 + */ +#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */ +#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */ +#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */ +#define SIUMCR_CDIS 0x10000000 /* Core Disable */ +#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/ +#define SIUMCR_DPPC01 0x04000000 /* - " - */ +#define SIUMCR_DPPC10 0x08000000 /* - " - */ +#define SIUMCR_DPPC11 0x0c000000 /* - " - */ +#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */ +#define SIUMCR_L2CPC01 0x01000000 /* - " - */ +#define SIUMCR_L2CPC10 0x02000000 /* - " - */ +#define SIUMCR_L2CPC11 0x03000000 /* - " - */ +#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */ +#define SIUMCR_LBPC01 0x00400000 /* - " - */ +#define SIUMCR_LBPC10 0x00800000 /* - " - */ +#define SIUMCR_LBPC11 0x00c00000 /* - " - */ +#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/ +#define SIUMCR_APPC01 0x00100000 /* - " - */ +#define SIUMCR_APPC10 0x00200000 /* - " - */ +#define SIUMCR_APPC11 0x00300000 /* - " - */ +#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */ +#define SIUMCR_CS10PC01 0x00040000 /* - " - */ +#define SIUMCR_CS10PC10 0x00080000 /* - " - */ +#define SIUMCR_CS10PC11 0x000c0000 /* - " - */ +#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */ +#define SIUMCR_BCTLC01 0x00010000 /* - " - */ +#define SIUMCR_BCTLC10 0x00020000 /* - " - */ +#define SIUMCR_BCTLC11 0x00030000 /* - " - */ +#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */ +#define SIUMCR_MMR01 0x00004000 /* - " - */ +#define SIUMCR_MMR10 0x00008000 /* - " - */ +#define SIUMCR_MMR11 0x0000c000 /* - " - */ +#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/ + +/*----------------------------------------------------------------------- + * SCCR - System Clock Control Register 9-8 +*/ +#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */ +#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */ +#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */ +#define SCCR_PCIDF_SHIFT 3 + +#ifndef CPM_IMMR_OFFSET +#define CPM_IMMR_OFFSET 0x101a8 +#endif + +#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ + +/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK + * in order to use clock-computing stuff below for the FCC x + */ + +/* Automatically generates register configurations */ +#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ + +#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ +#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ +#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ +#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ +#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ +#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ + +#define PC_F1RXCLK PC_CLK(F1_RXCLK) +#define PC_F1TXCLK PC_CLK(F1_TXCLK) +#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) +#define CMX1_CLK_MASK ((uint)0xff000000) + +#define PC_F2RXCLK PC_CLK(F2_RXCLK) +#define PC_F2TXCLK PC_CLK(F2_TXCLK) +#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) +#define CMX2_CLK_MASK ((uint)0x00ff0000) + +#define PC_F3RXCLK PC_CLK(F3_RXCLK) +#define PC_F3TXCLK PC_CLK(F3_TXCLK) +#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) +#define CMX3_CLK_MASK ((uint)0x0000ff00) + +#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK) +#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE) + +#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK) + +/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PA1_COL 0x00000001U +#define PA1_CRS 0x00000002U +#define PA1_TXER 0x00000004U +#define PA1_TXEN 0x00000008U +#define PA1_RXDV 0x00000010U +#define PA1_RXER 0x00000020U +#define PA1_TXDAT 0x00003c00U +#define PA1_RXDAT 0x0003c000U +#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) +#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ + PA1_RXDV | PA1_RXER) +#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) +#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) + + +/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB2_TXER 0x00000001U +#define PB2_RXDV 0x00000002U +#define PB2_TXEN 0x00000004U +#define PB2_RXER 0x00000008U +#define PB2_COL 0x00000010U +#define PB2_CRS 0x00000020U +#define PB2_TXDAT 0x000003c0U +#define PB2_RXDAT 0x00003c00U +#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ + PB2_RXER | PB2_RXDV | PB2_TXER) +#define PB2_PSORB1 (PB2_TXEN) +#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) +#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) + + +/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB3_RXDV 0x00004000U +#define PB3_RXER 0x00008000U +#define PB3_TXER 0x00010000U +#define PB3_TXEN 0x00020000U +#define PB3_COL 0x00040000U +#define PB3_CRS 0x00080000U +#define PB3_TXDAT 0x0f000000U +#define PC3_TXDAT 0x00000010U +#define PB3_RXDAT 0x00f00000U +#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ + PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) +#define PB3_PSORB1 0 +#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) +#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) +#define PC3_DIRC1 (PC3_TXDAT) + +/* Handy macro to specify mem for FCCs*/ +#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) +#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) +#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) +#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2) + +/* Clocks and GRG's */ + +enum cpm_clk_dir { + CPM_CLK_RX, + CPM_CLK_TX, + CPM_CLK_RTX +}; + +enum cpm_clk_target { + CPM_CLK_SCC1, + CPM_CLK_SCC2, + CPM_CLK_SCC3, + CPM_CLK_SCC4, + CPM_CLK_FCC1, + CPM_CLK_FCC2, + CPM_CLK_FCC3, + CPM_CLK_SMC1, + CPM_CLK_SMC2, +}; + +enum cpm_clk { + CPM_CLK_NONE = 0, + CPM_BRG1, /* Baud Rate Generator 1 */ + CPM_BRG2, /* Baud Rate Generator 2 */ + CPM_BRG3, /* Baud Rate Generator 3 */ + CPM_BRG4, /* Baud Rate Generator 4 */ + CPM_BRG5, /* Baud Rate Generator 5 */ + CPM_BRG6, /* Baud Rate Generator 6 */ + CPM_BRG7, /* Baud Rate Generator 7 */ + CPM_BRG8, /* Baud Rate Generator 8 */ + CPM_CLK1, /* Clock 1 */ + CPM_CLK2, /* Clock 2 */ + CPM_CLK3, /* Clock 3 */ + CPM_CLK4, /* Clock 4 */ + CPM_CLK5, /* Clock 5 */ + CPM_CLK6, /* Clock 6 */ + CPM_CLK7, /* Clock 7 */ + CPM_CLK8, /* Clock 8 */ + CPM_CLK9, /* Clock 9 */ + CPM_CLK10, /* Clock 10 */ + CPM_CLK11, /* Clock 11 */ + CPM_CLK12, /* Clock 12 */ + CPM_CLK13, /* Clock 13 */ + CPM_CLK14, /* Clock 14 */ + CPM_CLK15, /* Clock 15 */ + CPM_CLK16, /* Clock 16 */ + CPM_CLK17, /* Clock 17 */ + CPM_CLK18, /* Clock 18 */ + CPM_CLK19, /* Clock 19 */ + CPM_CLK20, /* Clock 20 */ + CPM_CLK_DUMMY +}; + +extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode); +extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock); + +#define CPM_PIN_INPUT 0 +#define CPM_PIN_OUTPUT 1 +#define CPM_PIN_PRIMARY 0 +#define CPM_PIN_SECONDARY 2 +#define CPM_PIN_GPIO 4 +#define CPM_PIN_OPENDRAIN 8 + +void cpm2_set_pin(int port, int pin, int flags); + +#endif /* __CPM2__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h new file mode 100644 index 000000000000..ef8a248dfd55 --- /dev/null +++ b/arch/powerpc/include/asm/cputable.h @@ -0,0 +1,514 @@ +#ifndef __ASM_POWERPC_CPUTABLE_H +#define __ASM_POWERPC_CPUTABLE_H + +#define PPC_FEATURE_32 0x80000000 +#define PPC_FEATURE_64 0x40000000 +#define PPC_FEATURE_601_INSTR 0x20000000 +#define PPC_FEATURE_HAS_ALTIVEC 0x10000000 +#define PPC_FEATURE_HAS_FPU 0x08000000 +#define PPC_FEATURE_HAS_MMU 0x04000000 +#define PPC_FEATURE_HAS_4xxMAC 0x02000000 +#define PPC_FEATURE_UNIFIED_CACHE 0x01000000 +#define PPC_FEATURE_HAS_SPE 0x00800000 +#define PPC_FEATURE_HAS_EFP_SINGLE 0x00400000 +#define PPC_FEATURE_HAS_EFP_DOUBLE 0x00200000 +#define PPC_FEATURE_NO_TB 0x00100000 +#define PPC_FEATURE_POWER4 0x00080000 +#define PPC_FEATURE_POWER5 0x00040000 +#define PPC_FEATURE_POWER5_PLUS 0x00020000 +#define PPC_FEATURE_CELL 0x00010000 +#define PPC_FEATURE_BOOKE 0x00008000 +#define PPC_FEATURE_SMT 0x00004000 +#define PPC_FEATURE_ICACHE_SNOOP 0x00002000 +#define PPC_FEATURE_ARCH_2_05 0x00001000 +#define PPC_FEATURE_PA6T 0x00000800 +#define PPC_FEATURE_HAS_DFP 0x00000400 +#define PPC_FEATURE_POWER6_EXT 0x00000200 +#define PPC_FEATURE_ARCH_2_06 0x00000100 +#define PPC_FEATURE_HAS_VSX 0x00000080 + +#define PPC_FEATURE_PSERIES_PERFMON_COMPAT \ + 0x00000040 + +#define PPC_FEATURE_TRUE_LE 0x00000002 +#define PPC_FEATURE_PPC_LE 0x00000001 + +#ifdef __KERNEL__ + +#include +#include + +#ifndef __ASSEMBLY__ + +/* This structure can grow, it's real size is used by head.S code + * via the mkdefs mechanism. + */ +struct cpu_spec; + +typedef void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec); +typedef void (*cpu_restore_t)(void); + +enum powerpc_oprofile_type { + PPC_OPROFILE_INVALID = 0, + PPC_OPROFILE_RS64 = 1, + PPC_OPROFILE_POWER4 = 2, + PPC_OPROFILE_G4 = 3, + PPC_OPROFILE_FSL_EMB = 4, + PPC_OPROFILE_CELL = 5, + PPC_OPROFILE_PA6T = 6, +}; + +enum powerpc_pmc_type { + PPC_PMC_DEFAULT = 0, + PPC_PMC_IBM = 1, + PPC_PMC_PA6T = 2, +}; + +struct pt_regs; + +extern int machine_check_generic(struct pt_regs *regs); +extern int machine_check_4xx(struct pt_regs *regs); +extern int machine_check_440A(struct pt_regs *regs); +extern int machine_check_e500(struct pt_regs *regs); +extern int machine_check_e200(struct pt_regs *regs); + +/* NOTE WELL: Update identify_cpu() if fields are added or removed! */ +struct cpu_spec { + /* CPU is matched via (PVR & pvr_mask) == pvr_value */ + unsigned int pvr_mask; + unsigned int pvr_value; + + char *cpu_name; + unsigned long cpu_features; /* Kernel features */ + unsigned int cpu_user_features; /* Userland features */ + + /* cache line sizes */ + unsigned int icache_bsize; + unsigned int dcache_bsize; + + /* number of performance monitor counters */ + unsigned int num_pmcs; + enum powerpc_pmc_type pmc_type; + + /* this is called to initialize various CPU bits like L1 cache, + * BHT, SPD, etc... from head.S before branching to identify_machine + */ + cpu_setup_t cpu_setup; + /* Used to restore cpu setup on secondary processors and at resume */ + cpu_restore_t cpu_restore; + + /* Used by oprofile userspace to select the right counters */ + char *oprofile_cpu_type; + + /* Processor specific oprofile operations */ + enum powerpc_oprofile_type oprofile_type; + + /* Bit locations inside the mmcra change */ + unsigned long oprofile_mmcra_sihv; + unsigned long oprofile_mmcra_sipr; + + /* Bits to clear during an oprofile exception */ + unsigned long oprofile_mmcra_clear; + + /* Name of processor class, for the ELF AT_PLATFORM entry */ + char *platform; + + /* Processor specific machine check handling. Return negative + * if the error is fatal, 1 if it was fully recovered and 0 to + * pass up (not CPU originated) */ + int (*machine_check)(struct pt_regs *regs); +}; + +extern struct cpu_spec *cur_cpu_spec; + +extern unsigned int __start___ftr_fixup, __stop___ftr_fixup; + +extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr); +extern void do_feature_fixups(unsigned long value, void *fixup_start, + void *fixup_end); + +extern const char *powerpc_base_platform; + +#endif /* __ASSEMBLY__ */ + +/* CPU kernel features */ + +/* Retain the 32b definitions all use bottom half of word */ +#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x0000000000000001) +#define CPU_FTR_L2CR ASM_CONST(0x0000000000000002) +#define CPU_FTR_SPEC7450 ASM_CONST(0x0000000000000004) +#define CPU_FTR_ALTIVEC ASM_CONST(0x0000000000000008) +#define CPU_FTR_TAU ASM_CONST(0x0000000000000010) +#define CPU_FTR_CAN_DOZE ASM_CONST(0x0000000000000020) +#define CPU_FTR_USE_TB ASM_CONST(0x0000000000000040) +#define CPU_FTR_L2CSR ASM_CONST(0x0000000000000080) +#define CPU_FTR_601 ASM_CONST(0x0000000000000100) +#define CPU_FTR_HPTE_TABLE ASM_CONST(0x0000000000000200) +#define CPU_FTR_CAN_NAP ASM_CONST(0x0000000000000400) +#define CPU_FTR_L3CR ASM_CONST(0x0000000000000800) +#define CPU_FTR_L3_DISABLE_NAP ASM_CONST(0x0000000000001000) +#define CPU_FTR_NAP_DISABLE_L2_PR ASM_CONST(0x0000000000002000) +#define CPU_FTR_DUAL_PLL_750FX ASM_CONST(0x0000000000004000) +#define CPU_FTR_NO_DPM ASM_CONST(0x0000000000008000) +#define CPU_FTR_HAS_HIGH_BATS ASM_CONST(0x0000000000010000) +#define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000) +#define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000) +#define CPU_FTR_BIG_PHYS ASM_CONST(0x0000000000080000) +#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000) +#define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000) +#define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000) +#define CPU_FTR_FPU_UNAVAILABLE ASM_CONST(0x0000000000800000) +#define CPU_FTR_UNIFIED_ID_CACHE ASM_CONST(0x0000000001000000) +#define CPU_FTR_SPE ASM_CONST(0x0000000002000000) +#define CPU_FTR_NEED_PAIRED_STWCX ASM_CONST(0x0000000004000000) +#define CPU_FTR_LWSYNC ASM_CONST(0x0000000008000000) + +/* + * Add the 64-bit processor unique features in the top half of the word; + * on 32-bit, make the names available but defined to be 0. + */ +#ifdef __powerpc64__ +#define LONG_ASM_CONST(x) ASM_CONST(x) +#else +#define LONG_ASM_CONST(x) 0 +#endif + +#define CPU_FTR_SLB LONG_ASM_CONST(0x0000000100000000) +#define CPU_FTR_16M_PAGE LONG_ASM_CONST(0x0000000200000000) +#define CPU_FTR_TLBIEL LONG_ASM_CONST(0x0000000400000000) +#define CPU_FTR_NOEXECUTE LONG_ASM_CONST(0x0000000800000000) +#define CPU_FTR_IABR LONG_ASM_CONST(0x0000002000000000) +#define CPU_FTR_MMCRA LONG_ASM_CONST(0x0000004000000000) +#define CPU_FTR_CTRL LONG_ASM_CONST(0x0000008000000000) +#define CPU_FTR_SMT LONG_ASM_CONST(0x0000010000000000) +#define CPU_FTR_LOCKLESS_TLBIE LONG_ASM_CONST(0x0000040000000000) +#define CPU_FTR_CI_LARGE_PAGE LONG_ASM_CONST(0x0000100000000000) +#define CPU_FTR_PAUSE_ZERO LONG_ASM_CONST(0x0000200000000000) +#define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000) +#define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000800000000000) +#define CPU_FTR_SPURR LONG_ASM_CONST(0x0001000000000000) +#define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000) +#define CPU_FTR_1T_SEGMENT LONG_ASM_CONST(0x0004000000000000) +#define CPU_FTR_NO_SLBIE_B LONG_ASM_CONST(0x0008000000000000) +#define CPU_FTR_VSX LONG_ASM_CONST(0x0010000000000000) +#define CPU_FTR_SAO LONG_ASM_CONST(0x0020000000000000) + +#ifndef __ASSEMBLY__ + +#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_SLB | \ + CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \ + CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE) + +/* We only set the altivec features if the kernel was compiled with altivec + * support + */ +#ifdef CONFIG_ALTIVEC +#define CPU_FTR_ALTIVEC_COMP CPU_FTR_ALTIVEC +#define PPC_FEATURE_HAS_ALTIVEC_COMP PPC_FEATURE_HAS_ALTIVEC +#else +#define CPU_FTR_ALTIVEC_COMP 0 +#define PPC_FEATURE_HAS_ALTIVEC_COMP 0 +#endif + +/* We only set the VSX features if the kernel was compiled with VSX + * support + */ +#ifdef CONFIG_VSX +#define CPU_FTR_VSX_COMP CPU_FTR_VSX +#define PPC_FEATURE_HAS_VSX_COMP PPC_FEATURE_HAS_VSX +#else +#define CPU_FTR_VSX_COMP 0 +#define PPC_FEATURE_HAS_VSX_COMP 0 +#endif + +/* We only set the spe features if the kernel was compiled with spe + * support + */ +#ifdef CONFIG_SPE +#define CPU_FTR_SPE_COMP CPU_FTR_SPE +#define PPC_FEATURE_HAS_SPE_COMP PPC_FEATURE_HAS_SPE +#define PPC_FEATURE_HAS_EFP_SINGLE_COMP PPC_FEATURE_HAS_EFP_SINGLE +#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP PPC_FEATURE_HAS_EFP_DOUBLE +#else +#define CPU_FTR_SPE_COMP 0 +#define PPC_FEATURE_HAS_SPE_COMP 0 +#define PPC_FEATURE_HAS_EFP_SINGLE_COMP 0 +#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP 0 +#endif + +/* We need to mark all pages as being coherent if we're SMP or we have a + * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II + * require it for PCI "streaming/prefetch" to work properly. + */ +#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \ + || defined(CONFIG_PPC_83xx) || defined(CONFIG_8260) +#define CPU_FTR_COMMON CPU_FTR_NEED_COHERENT +#else +#define CPU_FTR_COMMON 0 +#endif + +/* The powersave features NAP & DOZE seems to confuse BDI when + debugging. So if a BDI is used, disable theses + */ +#ifndef CONFIG_BDI_SWITCH +#define CPU_FTR_MAYBE_CAN_DOZE CPU_FTR_CAN_DOZE +#define CPU_FTR_MAYBE_CAN_NAP CPU_FTR_CAN_NAP +#else +#define CPU_FTR_MAYBE_CAN_DOZE 0 +#define CPU_FTR_MAYBE_CAN_NAP 0 +#endif + +#define CLASSIC_PPC (!defined(CONFIG_8xx) && !defined(CONFIG_4xx) && \ + !defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \ + !defined(CONFIG_BOOKE)) + +#define CPU_FTRS_PPC601 (CPU_FTR_COMMON | CPU_FTR_601 | CPU_FTR_HPTE_TABLE | \ + CPU_FTR_COHERENT_ICACHE | CPU_FTR_UNIFIED_ID_CACHE) +#define CPU_FTRS_603 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) +#define CPU_FTRS_604 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPC_LE) +#define CPU_FTRS_740_NOTAU (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) +#define CPU_FTRS_740 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ + CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \ + CPU_FTR_PPC_LE) +#define CPU_FTRS_750 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ + CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \ + CPU_FTR_PPC_LE) +#define CPU_FTRS_750CL (CPU_FTRS_750 | CPU_FTR_HAS_HIGH_BATS) +#define CPU_FTRS_750FX1 (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM) +#define CPU_FTRS_750FX2 (CPU_FTRS_750 | CPU_FTR_NO_DPM) +#define CPU_FTRS_750FX (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | \ + CPU_FTR_HAS_HIGH_BATS) +#define CPU_FTRS_750GX (CPU_FTRS_750FX) +#define CPU_FTRS_7400_NOTAU (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ + CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) +#define CPU_FTRS_7400 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ + CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) +#define CPU_FTRS_7450_20 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7450_21 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7450_23 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE) +#define CPU_FTRS_7455_1 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \ + CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE) +#define CPU_FTRS_7455_20 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_HAS_HIGH_BATS | CPU_FTR_PPC_LE) +#define CPU_FTRS_7455 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7447_10 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC | CPU_FTR_PPC_LE | \ + CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7447 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7447A (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7448 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_82XX (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB) +#define CPU_FTRS_G2_LE (CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \ + CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS) +#define CPU_FTRS_E300 (CPU_FTR_MAYBE_CAN_DOZE | \ + CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_COMMON) +#define CPU_FTRS_E300C2 (CPU_FTR_MAYBE_CAN_DOZE | \ + CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE) +#define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE) +#define CPU_FTRS_8XX (CPU_FTR_USE_TB) +#define CPU_FTRS_40X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN) +#define CPU_FTRS_44X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN) +#define CPU_FTRS_E200 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \ + CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \ + CPU_FTR_UNIFIED_ID_CACHE) +#define CPU_FTRS_E500 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ + CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN) +#define CPU_FTRS_E500_2 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ + CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | \ + CPU_FTR_NODSISRALIGN) +#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN | \ + CPU_FTR_L2CSR | CPU_FTR_LWSYNC) +#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN) + +/* 64-bit CPUs */ +#define CPU_FTRS_POWER3 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | CPU_FTR_PPC_LE) +#define CPU_FTRS_RS64 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | \ + CPU_FTR_MMCRA | CPU_FTR_CTRL) +#define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_MMCRA) +#define CPU_FTRS_PPC970 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA) +#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ + CPU_FTR_PURR) +#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ + CPU_FTR_DSCR) +#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ + CPU_FTR_DSCR | CPU_FTR_SAO) +#define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_CELL_TB_BUG) +#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \ + CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \ + CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B) +#define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2) + +#ifdef __powerpc64__ +#define CPU_FTRS_POSSIBLE \ + (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \ + CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \ + CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \ + CPU_FTR_1T_SEGMENT | CPU_FTR_VSX) +#else +enum { + CPU_FTRS_POSSIBLE = +#if CLASSIC_PPC + CPU_FTRS_PPC601 | CPU_FTRS_603 | CPU_FTRS_604 | CPU_FTRS_740_NOTAU | + CPU_FTRS_740 | CPU_FTRS_750 | CPU_FTRS_750FX1 | + CPU_FTRS_750FX2 | CPU_FTRS_750FX | CPU_FTRS_750GX | + CPU_FTRS_7400_NOTAU | CPU_FTRS_7400 | CPU_FTRS_7450_20 | + CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 | + CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 | + CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX | + CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 | + CPU_FTRS_CLASSIC32 | +#else + CPU_FTRS_GENERIC_32 | +#endif +#ifdef CONFIG_8xx + CPU_FTRS_8XX | +#endif +#ifdef CONFIG_40x + CPU_FTRS_40X | +#endif +#ifdef CONFIG_44x + CPU_FTRS_44X | +#endif +#ifdef CONFIG_E200 + CPU_FTRS_E200 | +#endif +#ifdef CONFIG_E500 + CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC | +#endif + 0, +}; +#endif /* __powerpc64__ */ + +#ifdef __powerpc64__ +#define CPU_FTRS_ALWAYS \ + (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \ + CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \ + CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE) +#else +enum { + CPU_FTRS_ALWAYS = +#if CLASSIC_PPC + CPU_FTRS_PPC601 & CPU_FTRS_603 & CPU_FTRS_604 & CPU_FTRS_740_NOTAU & + CPU_FTRS_740 & CPU_FTRS_750 & CPU_FTRS_750FX1 & + CPU_FTRS_750FX2 & CPU_FTRS_750FX & CPU_FTRS_750GX & + CPU_FTRS_7400_NOTAU & CPU_FTRS_7400 & CPU_FTRS_7450_20 & + CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 & + CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 & + CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX & + CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 & + CPU_FTRS_CLASSIC32 & +#else + CPU_FTRS_GENERIC_32 & +#endif +#ifdef CONFIG_8xx + CPU_FTRS_8XX & +#endif +#ifdef CONFIG_40x + CPU_FTRS_40X & +#endif +#ifdef CONFIG_44x + CPU_FTRS_44X & +#endif +#ifdef CONFIG_E200 + CPU_FTRS_E200 & +#endif +#ifdef CONFIG_E500 + CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC & +#endif + CPU_FTRS_POSSIBLE, +}; +#endif /* __powerpc64__ */ + +static inline int cpu_has_feature(unsigned long feature) +{ + return (CPU_FTRS_ALWAYS & feature) || + (CPU_FTRS_POSSIBLE + & cur_cpu_spec->cpu_features + & feature); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_CPUTABLE_H */ diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h new file mode 100644 index 000000000000..fb11b0c459b8 --- /dev/null +++ b/arch/powerpc/include/asm/cputhreads.h @@ -0,0 +1,71 @@ +#ifndef _ASM_POWERPC_CPUTHREADS_H +#define _ASM_POWERPC_CPUTHREADS_H + +#include + +/* + * Mapping of threads to cores + */ + +#ifdef CONFIG_SMP +extern int threads_per_core; +extern int threads_shift; +extern cpumask_t threads_core_mask; +#else +#define threads_per_core 1 +#define threads_shift 0 +#define threads_core_mask (CPU_MASK_CPU0) +#endif + +/* cpu_thread_mask_to_cores - Return a cpumask of one per cores + * hit by the argument + * + * @threads: a cpumask of threads + * + * This function returns a cpumask which will have one "cpu" (or thread) + * bit set for each core that has at least one thread set in the argument. + * + * This can typically be used for things like IPI for tlb invalidations + * since those need to be done only once per core/TLB + */ +static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads) +{ + cpumask_t tmp, res; + int i; + + res = CPU_MASK_NONE; + for (i = 0; i < NR_CPUS; i += threads_per_core) { + cpus_shift_left(tmp, threads_core_mask, i); + if (cpus_intersects(threads, tmp)) + cpu_set(i, res); + } + return res; +} + +static inline int cpu_nr_cores(void) +{ + return NR_CPUS >> threads_shift; +} + +static inline cpumask_t cpu_online_cores_map(void) +{ + return cpu_thread_mask_to_cores(cpu_online_map); +} + +static inline int cpu_thread_to_core(int cpu) +{ + return cpu >> threads_shift; +} + +static inline int cpu_thread_in_core(int cpu) +{ + return cpu & (threads_per_core - 1); +} + +static inline int cpu_first_thread_in_core(int cpu) +{ + return cpu & ~(threads_per_core - 1); +} + +#endif /* _ASM_POWERPC_CPUTHREADS_H */ + diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h new file mode 100644 index 000000000000..f42e623030ee --- /dev/null +++ b/arch/powerpc/include/asm/cputime.h @@ -0,0 +1,235 @@ +/* + * Definitions for measuring cputime on powerpc machines. + * + * Copyright (C) 2006 Paul Mackerras, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in + * the same units as the timebase. Otherwise we measure cpu time + * in jiffies using the generic definitions. + */ + +#ifndef __POWERPC_CPUTIME_H +#define __POWERPC_CPUTIME_H + +#ifndef CONFIG_VIRT_CPU_ACCOUNTING +#include +#else + +#include +#include +#include +#include +#include + +typedef u64 cputime_t; +typedef u64 cputime64_t; + +#define cputime_zero ((cputime_t)0) +#define cputime_max ((~((cputime_t)0) >> 1) - 1) +#define cputime_add(__a, __b) ((__a) + (__b)) +#define cputime_sub(__a, __b) ((__a) - (__b)) +#define cputime_div(__a, __n) ((__a) / (__n)) +#define cputime_halve(__a) ((__a) >> 1) +#define cputime_eq(__a, __b) ((__a) == (__b)) +#define cputime_gt(__a, __b) ((__a) > (__b)) +#define cputime_ge(__a, __b) ((__a) >= (__b)) +#define cputime_lt(__a, __b) ((__a) < (__b)) +#define cputime_le(__a, __b) ((__a) <= (__b)) + +#define cputime64_zero ((cputime64_t)0) +#define cputime64_add(__a, __b) ((__a) + (__b)) +#define cputime64_sub(__a, __b) ((__a) - (__b)) +#define cputime_to_cputime64(__ct) (__ct) + +#ifdef __KERNEL__ + +/* + * Convert cputime <-> jiffies + */ +extern u64 __cputime_jiffies_factor; +DECLARE_PER_CPU(unsigned long, cputime_last_delta); +DECLARE_PER_CPU(unsigned long, cputime_scaled_last_delta); + +static inline unsigned long cputime_to_jiffies(const cputime_t ct) +{ + return mulhdu(ct, __cputime_jiffies_factor); +} + +/* Estimate the scaled cputime by scaling the real cputime based on + * the last scaled to real ratio */ +static inline cputime_t cputime_to_scaled(const cputime_t ct) +{ + if (cpu_has_feature(CPU_FTR_SPURR) && + per_cpu(cputime_last_delta, smp_processor_id())) + return ct * + per_cpu(cputime_scaled_last_delta, smp_processor_id())/ + per_cpu(cputime_last_delta, smp_processor_id()); + return ct; +} + +static inline cputime_t jiffies_to_cputime(const unsigned long jif) +{ + cputime_t ct; + unsigned long sec; + + /* have to be a little careful about overflow */ + ct = jif % HZ; + sec = jif / HZ; + if (ct) { + ct *= tb_ticks_per_sec; + do_div(ct, HZ); + } + if (sec) + ct += (cputime_t) sec * tb_ticks_per_sec; + return ct; +} + +static inline cputime64_t jiffies64_to_cputime64(const u64 jif) +{ + cputime_t ct; + u64 sec; + + /* have to be a little careful about overflow */ + ct = jif % HZ; + sec = jif / HZ; + if (ct) { + ct *= tb_ticks_per_sec; + do_div(ct, HZ); + } + if (sec) + ct += (cputime_t) sec * tb_ticks_per_sec; + return ct; +} + +static inline u64 cputime64_to_jiffies64(const cputime_t ct) +{ + return mulhdu(ct, __cputime_jiffies_factor); +} + +/* + * Convert cputime <-> milliseconds + */ +extern u64 __cputime_msec_factor; + +static inline unsigned long cputime_to_msecs(const cputime_t ct) +{ + return mulhdu(ct, __cputime_msec_factor); +} + +static inline cputime_t msecs_to_cputime(const unsigned long ms) +{ + cputime_t ct; + unsigned long sec; + + /* have to be a little careful about overflow */ + ct = ms % 1000; + sec = ms / 1000; + if (ct) { + ct *= tb_ticks_per_sec; + do_div(ct, 1000); + } + if (sec) + ct += (cputime_t) sec * tb_ticks_per_sec; + return ct; +} + +/* + * Convert cputime <-> seconds + */ +extern u64 __cputime_sec_factor; + +static inline unsigned long cputime_to_secs(const cputime_t ct) +{ + return mulhdu(ct, __cputime_sec_factor); +} + +static inline cputime_t secs_to_cputime(const unsigned long sec) +{ + return (cputime_t) sec * tb_ticks_per_sec; +} + +/* + * Convert cputime <-> timespec + */ +static inline void cputime_to_timespec(const cputime_t ct, struct timespec *p) +{ + u64 x = ct; + unsigned int frac; + + frac = do_div(x, tb_ticks_per_sec); + p->tv_sec = x; + x = (u64) frac * 1000000000; + do_div(x, tb_ticks_per_sec); + p->tv_nsec = x; +} + +static inline cputime_t timespec_to_cputime(const struct timespec *p) +{ + cputime_t ct; + + ct = (u64) p->tv_nsec * tb_ticks_per_sec; + do_div(ct, 1000000000); + return ct + (u64) p->tv_sec * tb_ticks_per_sec; +} + +/* + * Convert cputime <-> timeval + */ +static inline void cputime_to_timeval(const cputime_t ct, struct timeval *p) +{ + u64 x = ct; + unsigned int frac; + + frac = do_div(x, tb_ticks_per_sec); + p->tv_sec = x; + x = (u64) frac * 1000000; + do_div(x, tb_ticks_per_sec); + p->tv_usec = x; +} + +static inline cputime_t timeval_to_cputime(const struct timeval *p) +{ + cputime_t ct; + + ct = (u64) p->tv_usec * tb_ticks_per_sec; + do_div(ct, 1000000); + return ct + (u64) p->tv_sec * tb_ticks_per_sec; +} + +/* + * Convert cputime <-> clock_t (units of 1/USER_HZ seconds) + */ +extern u64 __cputime_clockt_factor; + +static inline unsigned long cputime_to_clock_t(const cputime_t ct) +{ + return mulhdu(ct, __cputime_clockt_factor); +} + +static inline cputime_t clock_t_to_cputime(const unsigned long clk) +{ + cputime_t ct; + unsigned long sec; + + /* have to be a little careful about overflow */ + ct = clk % USER_HZ; + sec = clk / USER_HZ; + if (ct) { + ct *= tb_ticks_per_sec; + do_div(ct, USER_HZ); + } + if (sec) + ct += (cputime_t) sec * tb_ticks_per_sec; + return ct; +} + +#define cputime64_to_clock_t(ct) cputime_to_clock_t((cputime_t)(ct)) + +#endif /* __KERNEL__ */ +#endif /* CONFIG_VIRT_CPU_ACCOUNTING */ +#endif /* __POWERPC_CPUTIME_H */ diff --git a/arch/powerpc/include/asm/current.h b/arch/powerpc/include/asm/current.h new file mode 100644 index 000000000000..e2c7f06931e7 --- /dev/null +++ b/arch/powerpc/include/asm/current.h @@ -0,0 +1,40 @@ +#ifndef _ASM_POWERPC_CURRENT_H +#define _ASM_POWERPC_CURRENT_H +#ifdef __KERNEL__ + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +struct task_struct; + +#ifdef __powerpc64__ +#include +#include + +static inline struct task_struct *get_current(void) +{ + struct task_struct *task; + + __asm__ __volatile__("ld %0,%1(13)" + : "=r" (task) + : "i" (offsetof(struct paca_struct, __current))); + + return task; +} +#define current get_current() + +#else + +/* + * We keep `current' in r2 for speed. + */ +register struct task_struct *current asm ("r2"); + +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_CURRENT_H */ diff --git a/arch/powerpc/include/asm/dbdma.h b/arch/powerpc/include/asm/dbdma.h new file mode 100644 index 000000000000..e23f07e73cb3 --- /dev/null +++ b/arch/powerpc/include/asm/dbdma.h @@ -0,0 +1,108 @@ +/* + * Definitions for using the Apple Descriptor-Based DMA controller + * in Power Macintosh computers. + * + * Copyright (C) 1996 Paul Mackerras. + */ + +#ifdef __KERNEL__ +#ifndef _ASM_DBDMA_H_ +#define _ASM_DBDMA_H_ +/* + * DBDMA control/status registers. All little-endian. + */ +struct dbdma_regs { + unsigned int control; /* lets you change bits in status */ + unsigned int status; /* DMA and device status bits (see below) */ + unsigned int cmdptr_hi; /* upper 32 bits of command address */ + unsigned int cmdptr; /* (lower 32 bits of) command address (phys) */ + unsigned int intr_sel; /* select interrupt condition bit */ + unsigned int br_sel; /* select branch condition bit */ + unsigned int wait_sel; /* select wait condition bit */ + unsigned int xfer_mode; + unsigned int data2ptr_hi; + unsigned int data2ptr; + unsigned int res1; + unsigned int address_hi; + unsigned int br_addr_hi; + unsigned int res2[3]; +}; + +/* Bits in control and status registers */ +#define RUN 0x8000 +#define PAUSE 0x4000 +#define FLUSH 0x2000 +#define WAKE 0x1000 +#define DEAD 0x0800 +#define ACTIVE 0x0400 +#define BT 0x0100 +#define DEVSTAT 0x00ff + +/* + * DBDMA command structure. These fields are all little-endian! + */ +struct dbdma_cmd { + unsigned short req_count; /* requested byte transfer count */ + unsigned short command; /* command word (has bit-fields) */ + unsigned int phy_addr; /* physical data address */ + unsigned int cmd_dep; /* command-dependent field */ + unsigned short res_count; /* residual count after completion */ + unsigned short xfer_status; /* transfer status */ +}; + +/* DBDMA command values in command field */ +#define OUTPUT_MORE 0 /* transfer memory data to stream */ +#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */ +#define INPUT_MORE 0x2000 /* transfer stream data to memory */ +#define INPUT_LAST 0x3000 /* ditto, expect end marker */ +#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */ +#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */ +#define DBDMA_NOP 0x6000 /* do nothing */ +#define DBDMA_STOP 0x7000 /* suspend processing */ + +/* Key values in command field */ +#define KEY_STREAM0 0 /* usual data stream */ +#define KEY_STREAM1 0x100 /* control/status stream */ +#define KEY_STREAM2 0x200 /* device-dependent stream */ +#define KEY_STREAM3 0x300 /* device-dependent stream */ +#define KEY_REGS 0x500 /* device register space */ +#define KEY_SYSTEM 0x600 /* system memory-mapped space */ +#define KEY_DEVICE 0x700 /* device memory-mapped space */ + +/* Interrupt control values in command field */ +#define INTR_NEVER 0 /* don't interrupt */ +#define INTR_IFSET 0x10 /* intr if condition bit is 1 */ +#define INTR_IFCLR 0x20 /* intr if condition bit is 0 */ +#define INTR_ALWAYS 0x30 /* always interrupt */ + +/* Branch control values in command field */ +#define BR_NEVER 0 /* don't branch */ +#define BR_IFSET 0x4 /* branch if condition bit is 1 */ +#define BR_IFCLR 0x8 /* branch if condition bit is 0 */ +#define BR_ALWAYS 0xc /* always branch */ + +/* Wait control values in command field */ +#define WAIT_NEVER 0 /* don't wait */ +#define WAIT_IFSET 1 /* wait if condition bit is 1 */ +#define WAIT_IFCLR 2 /* wait if condition bit is 0 */ +#define WAIT_ALWAYS 3 /* always wait */ + +/* Align an address for a DBDMA command structure */ +#define DBDMA_ALIGN(x) (((unsigned long)(x) + sizeof(struct dbdma_cmd) - 1) \ + & -sizeof(struct dbdma_cmd)) + +/* Useful macros */ +#define DBDMA_DO_STOP(regs) do { \ + out_le32(&((regs)->control), (RUN|FLUSH)<<16); \ + while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH)) \ + ; \ +} while(0) + +#define DBDMA_DO_RESET(regs) do { \ + out_le32(&((regs)->control), (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);\ + while(in_le32(&((regs)->status)) & (RUN)) \ + ; \ +} while(0) + +#endif /* _ASM_DBDMA_H_ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/dcr-generic.h b/arch/powerpc/include/asm/dcr-generic.h new file mode 100644 index 000000000000..35b71599ec46 --- /dev/null +++ b/arch/powerpc/include/asm/dcr-generic.h @@ -0,0 +1,49 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_GENERIC_H +#define _ASM_POWERPC_DCR_GENERIC_H +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +enum host_type_t {DCR_HOST_MMIO, DCR_HOST_NATIVE, DCR_HOST_INVALID}; + +typedef struct { + enum host_type_t type; + union { + dcr_host_mmio_t mmio; + dcr_host_native_t native; + } host; +} dcr_host_t; + +extern bool dcr_map_ok_generic(dcr_host_t host); + +extern dcr_host_t dcr_map_generic(struct device_node *dev, unsigned int dcr_n, + unsigned int dcr_c); +extern void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c); + +extern u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n); + +extern void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value); + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_GENERIC_H */ + + diff --git a/arch/powerpc/include/asm/dcr-mmio.h b/arch/powerpc/include/asm/dcr-mmio.h new file mode 100644 index 000000000000..acd491dbd45a --- /dev/null +++ b/arch/powerpc/include/asm/dcr-mmio.h @@ -0,0 +1,61 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_MMIO_H +#define _ASM_POWERPC_DCR_MMIO_H +#ifdef __KERNEL__ + +#include + +typedef struct { + void __iomem *token; + unsigned int stride; + unsigned int base; +} dcr_host_mmio_t; + +static inline bool dcr_map_ok_mmio(dcr_host_mmio_t host) +{ + return host.token != NULL; +} + +extern dcr_host_mmio_t dcr_map_mmio(struct device_node *dev, + unsigned int dcr_n, + unsigned int dcr_c); +extern void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c); + +static inline u32 dcr_read_mmio(dcr_host_mmio_t host, unsigned int dcr_n) +{ + return in_be32(host.token + ((host.base + dcr_n) * host.stride)); +} + +static inline void dcr_write_mmio(dcr_host_mmio_t host, + unsigned int dcr_n, + u32 value) +{ + out_be32(host.token + ((host.base + dcr_n) * host.stride), value); +} + +extern u64 of_translate_dcr_address(struct device_node *dev, + unsigned int dcr_n, + unsigned int *stride); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_MMIO_H */ + + diff --git a/arch/powerpc/include/asm/dcr-native.h b/arch/powerpc/include/asm/dcr-native.h new file mode 100644 index 000000000000..72d2b72c7390 --- /dev/null +++ b/arch/powerpc/include/asm/dcr-native.h @@ -0,0 +1,116 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_NATIVE_H +#define _ASM_POWERPC_DCR_NATIVE_H +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#include + +typedef struct { + unsigned int base; +} dcr_host_native_t; + +static inline bool dcr_map_ok_native(dcr_host_native_t host) +{ + return 1; +} + +#define dcr_map_native(dev, dcr_n, dcr_c) \ + ((dcr_host_native_t){ .base = (dcr_n) }) +#define dcr_unmap_native(host, dcr_c) do {} while (0) +#define dcr_read_native(host, dcr_n) mfdcr(dcr_n + host.base) +#define dcr_write_native(host, dcr_n, value) mtdcr(dcr_n + host.base, value) + +/* Device Control Registers */ +void __mtdcr(int reg, unsigned int val); +unsigned int __mfdcr(int reg); +#define mfdcr(rn) \ + ({unsigned int rval; \ + if (__builtin_constant_p(rn)) \ + asm volatile("mfdcr %0," __stringify(rn) \ + : "=r" (rval)); \ + else \ + rval = __mfdcr(rn); \ + rval;}) + +#define mtdcr(rn, v) \ +do { \ + if (__builtin_constant_p(rn)) \ + asm volatile("mtdcr " __stringify(rn) ",%0" \ + : : "r" (v)); \ + else \ + __mtdcr(rn, v); \ +} while (0) + +/* R/W of indirect DCRs make use of standard naming conventions for DCRs */ +extern spinlock_t dcr_ind_lock; + +static inline unsigned __mfdcri(int base_addr, int base_data, int reg) +{ + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&dcr_ind_lock, flags); + __mtdcr(base_addr, reg); + val = __mfdcr(base_data); + spin_unlock_irqrestore(&dcr_ind_lock, flags); + return val; +} + +static inline void __mtdcri(int base_addr, int base_data, int reg, + unsigned val) +{ + unsigned long flags; + + spin_lock_irqsave(&dcr_ind_lock, flags); + __mtdcr(base_addr, reg); + __mtdcr(base_data, val); + spin_unlock_irqrestore(&dcr_ind_lock, flags); +} + +static inline void __dcri_clrset(int base_addr, int base_data, int reg, + unsigned clr, unsigned set) +{ + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&dcr_ind_lock, flags); + __mtdcr(base_addr, reg); + val = (__mfdcr(base_data) & ~clr) | set; + __mtdcr(base_data, val); + spin_unlock_irqrestore(&dcr_ind_lock, flags); +} + +#define mfdcri(base, reg) __mfdcri(DCRN_ ## base ## _CONFIG_ADDR, \ + DCRN_ ## base ## _CONFIG_DATA, \ + reg) + +#define mtdcri(base, reg, data) __mtdcri(DCRN_ ## base ## _CONFIG_ADDR, \ + DCRN_ ## base ## _CONFIG_DATA, \ + reg, data) + +#define dcri_clrset(base, reg, clr, set) __dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR, \ + DCRN_ ## base ## _CONFIG_DATA, \ + reg, clr, set) + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_NATIVE_H */ diff --git a/arch/powerpc/include/asm/dcr-regs.h b/arch/powerpc/include/asm/dcr-regs.h new file mode 100644 index 000000000000..29b0ecef980a --- /dev/null +++ b/arch/powerpc/include/asm/dcr-regs.h @@ -0,0 +1,149 @@ +/* + * Common DCR / SDR / CPR register definitions used on various IBM/AMCC + * 4xx processors + * + * Copyright 2007 Benjamin Herrenschmidt, IBM Corp + * + * + * Mostly lifted from asm-ppc/ibm4xx.h by + * + * Copyright (c) 1999 Grant Erickson + * + */ + +#ifndef __DCR_REGS_H__ +#define __DCR_REGS_H__ + +/* + * Most DCRs used for controlling devices such as the MAL, DMA engine, + * etc... are obtained for the device tree. + * + * The definitions in this files are fixed DCRs and indirect DCRs that + * are commonly used outside of specific drivers or refer to core + * common registers that may occasionally have to be tweaked outside + * of the driver main register set + */ + +/* CPRs (440GX and 440SP/440SPe) */ +#define DCRN_CPR0_CONFIG_ADDR 0xc +#define DCRN_CPR0_CONFIG_DATA 0xd + +/* SDRs (440GX and 440SP/440SPe) */ +#define DCRN_SDR0_CONFIG_ADDR 0xe +#define DCRN_SDR0_CONFIG_DATA 0xf + +#define SDR0_PFC0 0x4100 +#define SDR0_PFC1 0x4101 +#define SDR0_PFC1_EPS 0x1c00000 +#define SDR0_PFC1_EPS_SHIFT 22 +#define SDR0_PFC1_RMII 0x02000000 +#define SDR0_MFR 0x4300 +#define SDR0_MFR_TAH0 0x80000000 /* TAHOE0 Enable */ +#define SDR0_MFR_TAH1 0x40000000 /* TAHOE1 Enable */ +#define SDR0_MFR_PCM 0x10000000 /* PPC440GP irq compat mode */ +#define SDR0_MFR_ECS 0x08000000 /* EMAC int clk */ +#define SDR0_MFR_T0TXFL 0x00080000 +#define SDR0_MFR_T0TXFH 0x00040000 +#define SDR0_MFR_T1TXFL 0x00020000 +#define SDR0_MFR_T1TXFH 0x00010000 +#define SDR0_MFR_E0TXFL 0x00008000 +#define SDR0_MFR_E0TXFH 0x00004000 +#define SDR0_MFR_E0RXFL 0x00002000 +#define SDR0_MFR_E0RXFH 0x00001000 +#define SDR0_MFR_E1TXFL 0x00000800 +#define SDR0_MFR_E1TXFH 0x00000400 +#define SDR0_MFR_E1RXFL 0x00000200 +#define SDR0_MFR_E1RXFH 0x00000100 +#define SDR0_MFR_E2TXFL 0x00000080 +#define SDR0_MFR_E2TXFH 0x00000040 +#define SDR0_MFR_E2RXFL 0x00000020 +#define SDR0_MFR_E2RXFH 0x00000010 +#define SDR0_MFR_E3TXFL 0x00000008 +#define SDR0_MFR_E3TXFH 0x00000004 +#define SDR0_MFR_E3RXFL 0x00000002 +#define SDR0_MFR_E3RXFH 0x00000001 +#define SDR0_UART0 0x0120 +#define SDR0_UART1 0x0121 +#define SDR0_UART2 0x0122 +#define SDR0_UART3 0x0123 +#define SDR0_CUST0 0x4000 + +/* + * All those DCR register addresses are offsets from the base address + * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is + * excluded here and configured in the device tree. + */ +#define DCRN_SRAM0_SB0CR 0x00 +#define DCRN_SRAM0_SB1CR 0x01 +#define DCRN_SRAM0_SB2CR 0x02 +#define DCRN_SRAM0_SB3CR 0x03 +#define SRAM_SBCR_BU_MASK 0x00000180 +#define SRAM_SBCR_BS_64KB 0x00000800 +#define SRAM_SBCR_BU_RO 0x00000080 +#define SRAM_SBCR_BU_RW 0x00000180 +#define DCRN_SRAM0_BEAR 0x04 +#define DCRN_SRAM0_BESR0 0x05 +#define DCRN_SRAM0_BESR1 0x06 +#define DCRN_SRAM0_PMEG 0x07 +#define DCRN_SRAM0_CID 0x08 +#define DCRN_SRAM0_REVID 0x09 +#define DCRN_SRAM0_DPC 0x0a +#define SRAM_DPC_ENABLE 0x80000000 + +/* + * All those DCR register addresses are offsets from the base address + * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is + * excluded here and configured in the device tree. + */ +#define DCRN_L2C0_CFG 0x00 +#define L2C_CFG_L2M 0x80000000 +#define L2C_CFG_ICU 0x40000000 +#define L2C_CFG_DCU 0x20000000 +#define L2C_CFG_DCW_MASK 0x1e000000 +#define L2C_CFG_TPC 0x01000000 +#define L2C_CFG_CPC 0x00800000 +#define L2C_CFG_FRAN 0x00200000 +#define L2C_CFG_SS_MASK 0x00180000 +#define L2C_CFG_SS_256 0x00000000 +#define L2C_CFG_CPIM 0x00040000 +#define L2C_CFG_TPIM 0x00020000 +#define L2C_CFG_LIM 0x00010000 +#define L2C_CFG_PMUX_MASK 0x00007000 +#define L2C_CFG_PMUX_SNP 0x00000000 +#define L2C_CFG_PMUX_IF 0x00001000 +#define L2C_CFG_PMUX_DF 0x00002000 +#define L2C_CFG_PMUX_DS 0x00003000 +#define L2C_CFG_PMIM 0x00000800 +#define L2C_CFG_TPEI 0x00000400 +#define L2C_CFG_CPEI 0x00000200 +#define L2C_CFG_NAM 0x00000100 +#define L2C_CFG_SMCM 0x00000080 +#define L2C_CFG_NBRM 0x00000040 +#define L2C_CFG_RDBW 0x00000008 /* only 460EX/GT */ +#define DCRN_L2C0_CMD 0x01 +#define L2C_CMD_CLR 0x80000000 +#define L2C_CMD_DIAG 0x40000000 +#define L2C_CMD_INV 0x20000000 +#define L2C_CMD_CCP 0x10000000 +#define L2C_CMD_CTE 0x08000000 +#define L2C_CMD_STRC 0x04000000 +#define L2C_CMD_STPC 0x02000000 +#define L2C_CMD_RPMC 0x01000000 +#define L2C_CMD_HCC 0x00800000 +#define DCRN_L2C0_ADDR 0x02 +#define DCRN_L2C0_DATA 0x03 +#define DCRN_L2C0_SR 0x04 +#define L2C_SR_CC 0x80000000 +#define L2C_SR_CPE 0x40000000 +#define L2C_SR_TPE 0x20000000 +#define L2C_SR_LRU 0x10000000 +#define L2C_SR_PCS 0x08000000 +#define DCRN_L2C0_REVID 0x05 +#define DCRN_L2C0_SNP0 0x06 +#define DCRN_L2C0_SNP1 0x07 +#define L2C_SNP_BA_MASK 0xffff0000 +#define L2C_SNP_SSR_MASK 0x0000f000 +#define L2C_SNP_SSR_32G 0x0000f000 +#define L2C_SNP_ESR 0x00000800 + +#endif /* __DCR_REGS_H__ */ diff --git a/arch/powerpc/include/asm/dcr.h b/arch/powerpc/include/asm/dcr.h new file mode 100644 index 000000000000..53b283050ab3 --- /dev/null +++ b/arch/powerpc/include/asm/dcr.h @@ -0,0 +1,82 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_H +#define _ASM_POWERPC_DCR_H +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ +#ifdef CONFIG_PPC_DCR + +#ifdef CONFIG_PPC_DCR_NATIVE +#include +#endif + +#ifdef CONFIG_PPC_DCR_MMIO +#include +#endif + + +/* Indirection layer for providing both NATIVE and MMIO support. */ + +#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) + +#include + +#define DCR_MAP_OK(host) dcr_map_ok_generic(host) +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c) +#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c) +#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n) +#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value) + +#else + +#ifdef CONFIG_PPC_DCR_NATIVE +typedef dcr_host_native_t dcr_host_t; +#define DCR_MAP_OK(host) dcr_map_ok_native(host) +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c) +#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c) +#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n) +#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value) +#else +typedef dcr_host_mmio_t dcr_host_t; +#define DCR_MAP_OK(host) dcr_map_ok_mmio(host) +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c) +#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c) +#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n) +#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value) +#endif + +#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */ + +/* + * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR + * base from the device-tree + */ +#ifdef CONFIG_PPC_MERGE +struct device_node; +extern unsigned int dcr_resource_start(struct device_node *np, + unsigned int index); +extern unsigned int dcr_resource_len(struct device_node *np, + unsigned int index); +#endif /* CONFIG_PPC_MERGE */ + +#endif /* CONFIG_PPC_DCR */ +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_H */ diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h new file mode 100644 index 000000000000..f9200a65c632 --- /dev/null +++ b/arch/powerpc/include/asm/delay.h @@ -0,0 +1,34 @@ +#ifndef _ASM_POWERPC_DELAY_H +#define _ASM_POWERPC_DELAY_H +#ifdef __KERNEL__ + +/* + * Copyright 1996, Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * PPC64 Support added by Dave Engebretsen, Todd Inglett, Mike Corrigan, + * Anton Blanchard. + */ + +extern void __delay(unsigned long loops); +extern void udelay(unsigned long usecs); + +/* + * On shared processor machines the generic implementation of mdelay can + * result in large errors. While each iteration of the loop inside mdelay + * is supposed to take 1ms, the hypervisor could sleep our partition for + * longer (eg 10ms). With the right timing these errors can add up. + * + * Since there is no 32bit overflow issue on 64bit kernels, just call + * udelay directly. + */ +#ifdef CONFIG_PPC64 +#define mdelay(n) udelay((n) * 1000) +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DELAY_H */ diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h new file mode 100644 index 000000000000..228ab2a315b9 --- /dev/null +++ b/arch/powerpc/include/asm/device.h @@ -0,0 +1,24 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#ifndef _ASM_POWERPC_DEVICE_H +#define _ASM_POWERPC_DEVICE_H + +struct dma_mapping_ops; +struct device_node; + +struct dev_archdata { + /* Optional pointer to an OF device node */ + struct device_node *of_node; + + /* DMA operations on that device */ + struct dma_mapping_ops *dma_ops; + void *dma_data; + + /* NUMA node if applicable */ + int numa_node; +}; + +#endif /* _ASM_POWERPC_DEVICE_H */ diff --git a/arch/powerpc/include/asm/div64.h b/arch/powerpc/include/asm/div64.h new file mode 100644 index 000000000000..6cd978cefb28 --- /dev/null +++ b/arch/powerpc/include/asm/div64.h @@ -0,0 +1 @@ +#include diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h new file mode 100644 index 000000000000..c7ca45f97dd2 --- /dev/null +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -0,0 +1,474 @@ +/* + * Copyright (C) 2004 IBM + * + * Implements the generic device dma API for powerpc. + * the pci and vio busses + */ +#ifndef _ASM_DMA_MAPPING_H +#define _ASM_DMA_MAPPING_H +#ifdef __KERNEL__ + +#include +#include +/* need struct page definitions */ +#include +#include +#include +#include + +#define DMA_ERROR_CODE (~(dma_addr_t)0x0) + +#ifdef CONFIG_NOT_COHERENT_CACHE +/* + * DMA-consistent mapping functions for PowerPCs that don't support + * cache snooping. These allocate/free a region of uncached mapped + * memory space for use with DMA devices. Alternatively, you could + * allocate the space "normally" and use the cache management functions + * to ensure it is consistent. + */ +extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp); +extern void __dma_free_coherent(size_t size, void *vaddr); +extern void __dma_sync(void *vaddr, size_t size, int direction); +extern void __dma_sync_page(struct page *page, unsigned long offset, + size_t size, int direction); + +#else /* ! CONFIG_NOT_COHERENT_CACHE */ +/* + * Cache coherent cores. + */ + +#define __dma_alloc_coherent(gfp, size, handle) NULL +#define __dma_free_coherent(size, addr) ((void)0) +#define __dma_sync(addr, size, rw) ((void)0) +#define __dma_sync_page(pg, off, sz, rw) ((void)0) + +#endif /* ! CONFIG_NOT_COHERENT_CACHE */ + +#ifdef CONFIG_PPC64 + +static inline unsigned long device_to_mask(struct device *dev) +{ + if (dev->dma_mask && *dev->dma_mask) + return *dev->dma_mask; + /* Assume devices without mask can take 32 bit addresses */ + return 0xfffffffful; +} + +/* + * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO + */ +struct dma_mapping_ops { + void * (*alloc_coherent)(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); + void (*free_coherent)(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + dma_addr_t (*map_single)(struct device *dev, void *ptr, + size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs); + void (*unmap_single)(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs); + int (*map_sg)(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs); + void (*unmap_sg)(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs); + int (*dma_supported)(struct device *dev, u64 mask); + int (*set_dma_mask)(struct device *dev, u64 dma_mask); +}; + +static inline struct dma_mapping_ops *get_dma_ops(struct device *dev) +{ + /* We don't handle the NULL dev case for ISA for now. We could + * do it via an out of line call but it is not needed for now. The + * only ISA DMA device we support is the floppy and we have a hack + * in the floppy driver directly to get a device for us. + */ + if (unlikely(dev == NULL || dev->archdata.dma_ops == NULL)) + return NULL; + return dev->archdata.dma_ops; +} + +static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops) +{ + dev->archdata.dma_ops = ops; +} + +static inline int dma_supported(struct device *dev, u64 mask) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (unlikely(dma_ops == NULL)) + return 0; + if (dma_ops->dma_supported == NULL) + return 1; + return dma_ops->dma_supported(dev, mask); +} + +/* We have our own implementation of pci_set_dma_mask() */ +#define HAVE_ARCH_PCI_SET_DMA_MASK + +static inline int dma_set_mask(struct device *dev, u64 dma_mask) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (unlikely(dma_ops == NULL)) + return -EIO; + if (dma_ops->set_dma_mask != NULL) + return dma_ops->set_dma_mask(dev, dma_mask); + if (!dev->dma_mask || !dma_supported(dev, dma_mask)) + return -EIO; + *dev->dma_mask = dma_mask; + return 0; +} + +static inline dma_addr_t dma_map_single_attrs(struct device *dev, + void *cpu_addr, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->map_single(dev, cpu_addr, size, direction, attrs); +} + +static inline void dma_unmap_single_attrs(struct device *dev, + dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->unmap_single(dev, dma_addr, size, direction, attrs); +} + +static inline dma_addr_t dma_map_page_attrs(struct device *dev, + struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->map_single(dev, page_address(page) + offset, size, + direction, attrs); +} + +static inline void dma_unmap_page_attrs(struct device *dev, + dma_addr_t dma_address, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->unmap_single(dev, dma_address, size, direction, attrs); +} + +static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->map_sg(dev, sg, nents, direction, attrs); +} + +static inline void dma_unmap_sg_attrs(struct device *dev, + struct scatterlist *sg, + int nhwentries, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs); +} + +static inline void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->alloc_coherent(dev, size, dma_handle, flag); +} + +static inline void dma_free_coherent(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); +} + +static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, + size_t size, + enum dma_data_direction direction) +{ + return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL); +} + +static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction) +{ + dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL); +} + +static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + return dma_map_page_attrs(dev, page, offset, size, direction, NULL); +} + +static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, + enum dma_data_direction direction) +{ + dma_unmap_page_attrs(dev, dma_address, size, direction, NULL); +} + +static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + return dma_map_sg_attrs(dev, sg, nents, direction, NULL); +} + +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, + enum dma_data_direction direction) +{ + dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL); +} + +/* + * Available generic sets of operations + */ +extern struct dma_mapping_ops dma_iommu_ops; +extern struct dma_mapping_ops dma_direct_ops; + +#else /* CONFIG_PPC64 */ + +#define dma_supported(dev, mask) (1) + +static inline int dma_set_mask(struct device *dev, u64 dma_mask) +{ + if (!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + + *dev->dma_mask = dma_mask; + + return 0; +} + +static inline void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t * dma_handle, + gfp_t gfp) +{ +#ifdef CONFIG_NOT_COHERENT_CACHE + return __dma_alloc_coherent(size, dma_handle, gfp); +#else + void *ret; + /* ignore region specifiers */ + gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); + + if (dev == NULL || dev->coherent_dma_mask < 0xffffffff) + gfp |= GFP_DMA; + + ret = (void *)__get_free_pages(gfp, get_order(size)); + + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = virt_to_bus(ret); + } + + return ret; +#endif +} + +static inline void +dma_free_coherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle) +{ +#ifdef CONFIG_NOT_COHERENT_CACHE + __dma_free_coherent(size, vaddr); +#else + free_pages((unsigned long)vaddr, get_order(size)); +#endif +} + +static inline dma_addr_t +dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + __dma_sync(ptr, size, direction); + + return virt_to_bus(ptr); +} + +static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction) +{ + /* We do nothing. */ +} + +static inline dma_addr_t +dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + __dma_sync_page(page, offset, size, direction); + + return page_to_bus(page) + offset; +} + +static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, + enum dma_data_direction direction) +{ + /* We do nothing. */ +} + +static inline int +dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents, + enum dma_data_direction direction) +{ + struct scatterlist *sg; + int i; + + BUG_ON(direction == DMA_NONE); + + for_each_sg(sgl, sg, nents, i) { + BUG_ON(!sg_page(sg)); + __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction); + sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset; + } + + return nents; +} + +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, + enum dma_data_direction direction) +{ + /* We don't do anything here. */ +} + +#endif /* CONFIG_PPC64 */ + +static inline void dma_sync_single_for_cpu(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + __dma_sync(bus_to_virt(dma_handle), size, direction); +} + +static inline void dma_sync_single_for_device(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + __dma_sync(bus_to_virt(dma_handle), size, direction); +} + +static inline void dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sgl, int nents, + enum dma_data_direction direction) +{ + struct scatterlist *sg; + int i; + + BUG_ON(direction == DMA_NONE); + + for_each_sg(sgl, sg, nents, i) + __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction); +} + +static inline void dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sgl, int nents, + enum dma_data_direction direction) +{ + struct scatterlist *sg; + int i; + + BUG_ON(direction == DMA_NONE); + + for_each_sg(sgl, sg, nents, i) + __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction); +} + +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ +#ifdef CONFIG_PPC64 + return (dma_addr == DMA_ERROR_CODE); +#else + return 0; +#endif +} + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) +#ifdef CONFIG_NOT_COHERENT_CACHE +#define dma_is_consistent(d, h) (0) +#else +#define dma_is_consistent(d, h) (1) +#endif + +static inline int dma_get_cache_alignment(void) +{ +#ifdef CONFIG_PPC64 + /* no easy way to get cache size on all processors, so return + * the maximum possible, to be safe */ + return (1 << INTERNODE_CACHE_SHIFT); +#else + /* + * Each processor family will define its own L1_CACHE_SHIFT, + * L1_CACHE_BYTES wraps to this, so this is always safe. + */ + return L1_CACHE_BYTES; +#endif +} + +static inline void dma_sync_single_range_for_cpu(struct device *dev, + dma_addr_t dma_handle, unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + /* just sync everything for now */ + dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction); +} + +static inline void dma_sync_single_range_for_device(struct device *dev, + dma_addr_t dma_handle, unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + /* just sync everything for now */ + dma_sync_single_for_device(dev, dma_handle, offset + size, direction); +} + +static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + __dma_sync(vaddr, size, (int)direction); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_DMA_MAPPING_H */ diff --git a/arch/powerpc/include/asm/dma.h b/arch/powerpc/include/asm/dma.h new file mode 100644 index 000000000000..a7e06e25c708 --- /dev/null +++ b/arch/powerpc/include/asm/dma.h @@ -0,0 +1,360 @@ +#ifndef _ASM_POWERPC_DMA_H +#define _ASM_POWERPC_DMA_H +#ifdef __KERNEL__ + +/* + * Defines for using and allocating dma channels. + * Written by Hennus Bergman, 1992. + * High DMA channel support & info by Hannu Savolainen + * and John Boyd, Nov. 1992. + * Changes for ppc sound by Christoph Nadig + */ + +/* + * Note: Adapted for PowerPC by Gary Thomas + * Modified by Cort Dougan + * + * None of this really applies for Power Macintoshes. There is + * basically just enough here to get kernel/dma.c to compile. + * + * There may be some comments or restrictions made here which are + * not valid for the PReP platform. Take what you read + * with a grain of salt. + */ + +#include +#include +#include + +#ifndef MAX_DMA_CHANNELS +#define MAX_DMA_CHANNELS 8 +#endif + +/* The maximum address that we can perform a DMA transfer to on this platform */ +/* Doesn't really apply... */ +#define MAX_DMA_ADDRESS (~0UL) + +#if !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) + +#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER +#define dma_outb outb_p +#else +#define dma_outb outb +#endif + +#define dma_inb inb + +/* + * NOTES about DMA transfers: + * + * controller 1: channels 0-3, byte operations, ports 00-1F + * controller 2: channels 4-7, word operations, ports C0-DF + * + * - ALL registers are 8 bits only, regardless of transfer size + * - channel 4 is not used - cascades 1 into 2. + * - channels 0-3 are byte - addresses/counts are for physical bytes + * - channels 5-7 are word - addresses/counts are for physical words + * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries + * - transfer count loaded to registers is 1 less than actual count + * - controller 2 offsets are all even (2x offsets for controller 1) + * - page registers for 5-7 don't use data bit 0, represent 128K pages + * - page registers for 0-3 use bit 0, represent 64K pages + * + * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory. + * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing. + * Note that addresses loaded into registers must be _physical_ addresses, + * not logical addresses (which may differ if paging is active). + * + * Address mapping for channels 0-3: + * + * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * P7 ... P0 A7 ... A0 A7 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Address mapping for channels 5-7: + * + * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) + * | ... | \ \ ... \ \ \ ... \ \ + * | ... | \ \ ... \ \ \ ... \ (not used) + * | ... | \ \ ... \ \ \ ... \ + * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses + * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at + * the hardware level, so odd-byte transfers aren't possible). + * + * Transfer count (_not # bytes_) is limited to 64K, represented as actual + * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, + * and up to 128K bytes may be transferred on channels 5-7 in one operation. + * + */ + +/* 8237 DMA controllers */ +#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ +#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */ + +/* DMA controller registers */ +#define DMA1_CMD_REG 0x08 /* command register (w) */ +#define DMA1_STAT_REG 0x08 /* status register (r) */ +#define DMA1_REQ_REG 0x09 /* request register (w) */ +#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ +#define DMA1_MODE_REG 0x0B /* mode register (w) */ +#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ +#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ +#define DMA1_RESET_REG 0x0D /* Master Clear (w) */ +#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ +#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ + +#define DMA2_CMD_REG 0xD0 /* command register (w) */ +#define DMA2_STAT_REG 0xD0 /* status register (r) */ +#define DMA2_REQ_REG 0xD2 /* request register (w) */ +#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ +#define DMA2_MODE_REG 0xD6 /* mode register (w) */ +#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ +#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ +#define DMA2_RESET_REG 0xDA /* Master Clear (w) */ +#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ +#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ + +#define DMA_ADDR_0 0x00 /* DMA address registers */ +#define DMA_ADDR_1 0x02 +#define DMA_ADDR_2 0x04 +#define DMA_ADDR_3 0x06 +#define DMA_ADDR_4 0xC0 +#define DMA_ADDR_5 0xC4 +#define DMA_ADDR_6 0xC8 +#define DMA_ADDR_7 0xCC + +#define DMA_CNT_0 0x01 /* DMA count registers */ +#define DMA_CNT_1 0x03 +#define DMA_CNT_2 0x05 +#define DMA_CNT_3 0x07 +#define DMA_CNT_4 0xC2 +#define DMA_CNT_5 0xC6 +#define DMA_CNT_6 0xCA +#define DMA_CNT_7 0xCE + +#define DMA_LO_PAGE_0 0x87 /* DMA page registers */ +#define DMA_LO_PAGE_1 0x83 +#define DMA_LO_PAGE_2 0x81 +#define DMA_LO_PAGE_3 0x82 +#define DMA_LO_PAGE_5 0x8B +#define DMA_LO_PAGE_6 0x89 +#define DMA_LO_PAGE_7 0x8A + +#define DMA_HI_PAGE_0 0x487 /* DMA page registers */ +#define DMA_HI_PAGE_1 0x483 +#define DMA_HI_PAGE_2 0x481 +#define DMA_HI_PAGE_3 0x482 +#define DMA_HI_PAGE_5 0x48B +#define DMA_HI_PAGE_6 0x489 +#define DMA_HI_PAGE_7 0x48A + +#define DMA1_EXT_REG 0x40B +#define DMA2_EXT_REG 0x4D6 + +#ifndef __powerpc64__ + /* in arch/ppc/kernel/setup.c -- Cort */ + extern unsigned int DMA_MODE_WRITE; + extern unsigned int DMA_MODE_READ; + extern unsigned long ISA_DMA_THRESHOLD; +#else + #define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ + #define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ +#endif + +#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ + +#define DMA_AUTOINIT 0x10 + +extern spinlock_t dma_spin_lock; + +static __inline__ unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static __inline__ void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + unsigned char ucDmaCmd = 0x00; + + if (dmanr != 4) { + dma_outb(0, DMA2_MASK_REG); /* This may not be enabled */ + dma_outb(ucDmaCmd, DMA2_CMD_REG); /* Enable group */ + } + if (dmanr <= 3) { + dma_outb(dmanr, DMA1_MASK_REG); + dma_outb(ucDmaCmd, DMA1_CMD_REG); /* Enable group */ + } else { + dma_outb(dmanr & 3, DMA2_MASK_REG); + } +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + if (dmanr <= 3) + dma_outb(dmanr | 4, DMA1_MASK_REG); + else + dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); +} + +/* Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while interrupts are disabled! --- + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ + if (dmanr <= 3) + dma_outb(0, DMA1_CLEAR_FF_REG); + else + dma_outb(0, DMA2_CLEAR_FF_REG); +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + if (dmanr <= 3) + dma_outb(mode | dmanr, DMA1_MODE_REG); + else + dma_outb(mode | (dmanr & 3), DMA2_MODE_REG); +} + +/* Set only the page register bits of the transfer address. + * This is used for successive transfers when we know the contents of + * the lower 16 bits of the DMA current address register, but a 64k boundary + * may have been crossed. + */ +static __inline__ void set_dma_page(unsigned int dmanr, int pagenr) +{ + switch (dmanr) { + case 0: + dma_outb(pagenr, DMA_LO_PAGE_0); + dma_outb(pagenr >> 8, DMA_HI_PAGE_0); + break; + case 1: + dma_outb(pagenr, DMA_LO_PAGE_1); + dma_outb(pagenr >> 8, DMA_HI_PAGE_1); + break; + case 2: + dma_outb(pagenr, DMA_LO_PAGE_2); + dma_outb(pagenr >> 8, DMA_HI_PAGE_2); + break; + case 3: + dma_outb(pagenr, DMA_LO_PAGE_3); + dma_outb(pagenr >> 8, DMA_HI_PAGE_3); + break; + case 5: + dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5); + dma_outb(pagenr >> 8, DMA_HI_PAGE_5); + break; + case 6: + dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6); + dma_outb(pagenr >> 8, DMA_HI_PAGE_6); + break; + case 7: + dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7); + dma_outb(pagenr >> 8, DMA_HI_PAGE_7); + break; + } +} + +/* Set transfer address & page bits for specific DMA channel. + * Assumes dma flipflop is clear. + */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys) +{ + if (dmanr <= 3) { + dma_outb(phys & 0xff, + ((dmanr & 3) << 1) + IO_DMA1_BASE); + dma_outb((phys >> 8) & 0xff, + ((dmanr & 3) << 1) + IO_DMA1_BASE); + } else { + dma_outb((phys >> 1) & 0xff, + ((dmanr & 3) << 2) + IO_DMA2_BASE); + dma_outb((phys >> 9) & 0xff, + ((dmanr & 3) << 2) + IO_DMA2_BASE); + } + set_dma_page(dmanr, phys >> 16); +} + + +/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for + * a specific DMA channel. + * You must ensure the parameters are valid. + * NOTE: from a manual: "the number of transfers is one more + * than the initial word count"! This is taken into account. + * Assumes dma flip-flop is clear. + * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + count--; + if (dmanr <= 3) { + dma_outb(count & 0xff, + ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE); + dma_outb((count >> 8) & 0xff, + ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE); + } else { + dma_outb((count >> 1) & 0xff, + ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE); + dma_outb((count >> 9) & 0xff, + ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE); + } +} + + +/* Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * If called before the channel has been used, it may return 1. + * Otherwise, it returns the number of _bytes_ left to transfer. + * + * Assumes DMA flip-flop is clear. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + unsigned int io_port = (dmanr <= 3) + ? ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE + : ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE; + + /* using short to get 16-bit wrap around */ + unsigned short count; + + count = 1 + dma_inb(io_port); + count += dma_inb(io_port) << 8; + + return (dmanr <= 3) ? count : (count << 1); +} + +/* These are in kernel/dma.c: */ + +/* reserve a DMA channel */ +extern int request_dma(unsigned int dmanr, const char *device_id); +/* release it again */ +extern void free_dma(unsigned int dmanr); + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DMA_H */ diff --git a/arch/powerpc/include/asm/edac.h b/arch/powerpc/include/asm/edac.h new file mode 100644 index 000000000000..6ead88bbfbb8 --- /dev/null +++ b/arch/powerpc/include/asm/edac.h @@ -0,0 +1,40 @@ +/* + * PPC EDAC common defs + * + * Author: Dave Jiang + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef ASM_EDAC_H +#define ASM_EDAC_H +/* + * ECC atomic, DMA, SMP and interrupt safe scrub function. + * Implements the per arch atomic_scrub() that EDAC use for software + * ECC scrubbing. It reads memory and then writes back the original + * value, allowing the hardware to detect and correct memory errors. + */ +static __inline__ void atomic_scrub(void *va, u32 size) +{ + unsigned int *virt_addr = va; + unsigned int temp; + unsigned int i; + + for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) { + /* Very carefully read and write to memory atomically + * so we are interrupt, DMA and SMP safe. + */ + __asm__ __volatile__ ("\n\ + 1: lwarx %0,0,%1\n\ + stwcx. %0,0,%1\n\ + bne- 1b\n\ + isync" + : "=&r"(temp) + : "r"(virt_addr) + : "cr0", "memory"); + } +} + +#endif diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h new file mode 100644 index 000000000000..b886bec67016 --- /dev/null +++ b/arch/powerpc/include/asm/eeh.h @@ -0,0 +1,211 @@ +/* + * eeh.h + * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _PPC64_EEH_H +#define _PPC64_EEH_H +#ifdef __KERNEL__ + +#include +#include +#include + +struct pci_dev; +struct pci_bus; +struct device_node; + +#ifdef CONFIG_EEH + +extern int eeh_subsystem_enabled; + +/* Values for eeh_mode bits in device_node */ +#define EEH_MODE_SUPPORTED (1<<0) +#define EEH_MODE_NOCHECK (1<<1) +#define EEH_MODE_ISOLATED (1<<2) +#define EEH_MODE_RECOVERING (1<<3) +#define EEH_MODE_IRQ_DISABLED (1<<4) + +/* Max number of EEH freezes allowed before we consider the device + * to be permanently disabled. */ +#define EEH_MAX_ALLOWED_FREEZES 5 + +void __init eeh_init(void); +unsigned long eeh_check_failure(const volatile void __iomem *token, + unsigned long val); +int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev); +void __init pci_addr_cache_build(void); + +/** + * eeh_add_device_early + * eeh_add_device_late + * + * Perform eeh initialization for devices added after boot. + * Call eeh_add_device_early before doing any i/o to the + * device (including config space i/o). Call eeh_add_device_late + * to finish the eeh setup for this device. + */ +void eeh_add_device_tree_early(struct device_node *); +void eeh_add_device_tree_late(struct pci_bus *); + +/** + * eeh_remove_device_recursive - undo EEH for device & children. + * @dev: pci device to be removed + * + * As above, this removes the device; it also removes child + * pci devices as well. + */ +void eeh_remove_bus_device(struct pci_dev *); + +/** + * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure. + * + * If this macro yields TRUE, the caller relays to eeh_check_failure() + * which does further tests out of line. + */ +#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_subsystem_enabled) + +/* + * Reads from a device which has been isolated by EEH will return + * all 1s. This macro gives an all-1s value of the given size (in + * bytes: 1, 2, or 4) for comparing with the result of a read. + */ +#define EEH_IO_ERROR_VALUE(size) (~0U >> ((4 - (size)) * 8)) + +#else /* !CONFIG_EEH */ +static inline void eeh_init(void) { } + +static inline unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val) +{ + return val; +} + +static inline int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) +{ + return 0; +} + +static inline void pci_addr_cache_build(void) { } + +static inline void eeh_add_device_tree_early(struct device_node *dn) { } + +static inline void eeh_add_device_tree_late(struct pci_bus *bus) { } + +static inline void eeh_remove_bus_device(struct pci_dev *dev) { } +#define EEH_POSSIBLE_ERROR(val, type) (0) +#define EEH_IO_ERROR_VALUE(size) (-1UL) +#endif /* CONFIG_EEH */ + +/* + * MMIO read/write operations with EEH support. + */ +static inline u8 eeh_readb(const volatile void __iomem *addr) +{ + u8 val = in_8(addr); + if (EEH_POSSIBLE_ERROR(val, u8)) + return eeh_check_failure(addr, val); + return val; +} + +static inline u16 eeh_readw(const volatile void __iomem *addr) +{ + u16 val = in_le16(addr); + if (EEH_POSSIBLE_ERROR(val, u16)) + return eeh_check_failure(addr, val); + return val; +} + +static inline u32 eeh_readl(const volatile void __iomem *addr) +{ + u32 val = in_le32(addr); + if (EEH_POSSIBLE_ERROR(val, u32)) + return eeh_check_failure(addr, val); + return val; +} + +static inline u64 eeh_readq(const volatile void __iomem *addr) +{ + u64 val = in_le64(addr); + if (EEH_POSSIBLE_ERROR(val, u64)) + return eeh_check_failure(addr, val); + return val; +} + +static inline u16 eeh_readw_be(const volatile void __iomem *addr) +{ + u16 val = in_be16(addr); + if (EEH_POSSIBLE_ERROR(val, u16)) + return eeh_check_failure(addr, val); + return val; +} + +static inline u32 eeh_readl_be(const volatile void __iomem *addr) +{ + u32 val = in_be32(addr); + if (EEH_POSSIBLE_ERROR(val, u32)) + return eeh_check_failure(addr, val); + return val; +} + +static inline u64 eeh_readq_be(const volatile void __iomem *addr) +{ + u64 val = in_be64(addr); + if (EEH_POSSIBLE_ERROR(val, u64)) + return eeh_check_failure(addr, val); + return val; +} + +static inline void eeh_memcpy_fromio(void *dest, const + volatile void __iomem *src, + unsigned long n) +{ + _memcpy_fromio(dest, src, n); + + /* Look for ffff's here at dest[n]. Assume that at least 4 bytes + * were copied. Check all four bytes. + */ + if (n >= 4 && EEH_POSSIBLE_ERROR(*((u32 *)(dest + n - 4)), u32)) + eeh_check_failure(src, *((u32 *)(dest + n - 4))); +} + +/* in-string eeh macros */ +static inline void eeh_readsb(const volatile void __iomem *addr, void * buf, + int ns) +{ + _insb(addr, buf, ns); + if (EEH_POSSIBLE_ERROR((*(((u8*)buf)+ns-1)), u8)) + eeh_check_failure(addr, *(u8*)buf); +} + +static inline void eeh_readsw(const volatile void __iomem *addr, void * buf, + int ns) +{ + _insw(addr, buf, ns); + if (EEH_POSSIBLE_ERROR((*(((u16*)buf)+ns-1)), u16)) + eeh_check_failure(addr, *(u16*)buf); +} + +static inline void eeh_readsl(const volatile void __iomem *addr, void * buf, + int nl) +{ + _insl(addr, buf, nl); + if (EEH_POSSIBLE_ERROR((*(((u32*)buf)+nl-1)), u32)) + eeh_check_failure(addr, *(u32*)buf); +} + +#endif /* __KERNEL__ */ +#endif /* _PPC64_EEH_H */ diff --git a/arch/powerpc/include/asm/eeh_event.h b/arch/powerpc/include/asm/eeh_event.h new file mode 100644 index 000000000000..cc3cb04539ac --- /dev/null +++ b/arch/powerpc/include/asm/eeh_event.h @@ -0,0 +1,53 @@ +/* + * eeh_event.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Copyright (c) 2005 Linas Vepstas + */ + +#ifndef ASM_POWERPC_EEH_EVENT_H +#define ASM_POWERPC_EEH_EVENT_H +#ifdef __KERNEL__ + +/** EEH event -- structure holding pci controller data that describes + * a change in the isolation status of a PCI slot. A pointer + * to this struct is passed as the data pointer in a notify callback. + */ +struct eeh_event { + struct list_head list; + struct device_node *dn; /* struct device node */ + struct pci_dev *dev; /* affected device */ +}; + +/** + * eeh_send_failure_event - generate a PCI error event + * @dev pci device + * + * This routine builds a PCI error event which will be delivered + * to all listeners on the eeh_notifier_chain. + * + * This routine can be called within an interrupt context; + * the actual event will be delivered in a normal context + * (from a workqueue). + */ +int eeh_send_failure_event (struct device_node *dn, + struct pci_dev *dev); + +/* Main recovery function */ +struct pci_dn * handle_eeh_events (struct eeh_event *); + +#endif /* __KERNEL__ */ +#endif /* ASM_POWERPC_EEH_EVENT_H */ diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h new file mode 100644 index 000000000000..80d1f399ee51 --- /dev/null +++ b/arch/powerpc/include/asm/elf.h @@ -0,0 +1,424 @@ +#ifndef _ASM_POWERPC_ELF_H +#define _ASM_POWERPC_ELF_H + +#ifdef __KERNEL__ +#include /* for task_struct */ +#include +#include +#endif + +#include +#include +#include +#include + +/* PowerPC relocations defined by the ABIs */ +#define R_PPC_NONE 0 +#define R_PPC_ADDR32 1 /* 32bit absolute address */ +#define R_PPC_ADDR24 2 /* 26bit address, 2 bits ignored. */ +#define R_PPC_ADDR16 3 /* 16bit absolute address */ +#define R_PPC_ADDR16_LO 4 /* lower 16bit of absolute address */ +#define R_PPC_ADDR16_HI 5 /* high 16bit of absolute address */ +#define R_PPC_ADDR16_HA 6 /* adjusted high 16bit */ +#define R_PPC_ADDR14 7 /* 16bit address, 2 bits ignored */ +#define R_PPC_ADDR14_BRTAKEN 8 +#define R_PPC_ADDR14_BRNTAKEN 9 +#define R_PPC_REL24 10 /* PC relative 26 bit */ +#define R_PPC_REL14 11 /* PC relative 16 bit */ +#define R_PPC_REL14_BRTAKEN 12 +#define R_PPC_REL14_BRNTAKEN 13 +#define R_PPC_GOT16 14 +#define R_PPC_GOT16_LO 15 +#define R_PPC_GOT16_HI 16 +#define R_PPC_GOT16_HA 17 +#define R_PPC_PLTREL24 18 +#define R_PPC_COPY 19 +#define R_PPC_GLOB_DAT 20 +#define R_PPC_JMP_SLOT 21 +#define R_PPC_RELATIVE 22 +#define R_PPC_LOCAL24PC 23 +#define R_PPC_UADDR32 24 +#define R_PPC_UADDR16 25 +#define R_PPC_REL32 26 +#define R_PPC_PLT32 27 +#define R_PPC_PLTREL32 28 +#define R_PPC_PLT16_LO 29 +#define R_PPC_PLT16_HI 30 +#define R_PPC_PLT16_HA 31 +#define R_PPC_SDAREL16 32 +#define R_PPC_SECTOFF 33 +#define R_PPC_SECTOFF_LO 34 +#define R_PPC_SECTOFF_HI 35 +#define R_PPC_SECTOFF_HA 36 + +/* PowerPC relocations defined for the TLS access ABI. */ +#define R_PPC_TLS 67 /* none (sym+add)@tls */ +#define R_PPC_DTPMOD32 68 /* word32 (sym+add)@dtpmod */ +#define R_PPC_TPREL16 69 /* half16* (sym+add)@tprel */ +#define R_PPC_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */ +#define R_PPC_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */ +#define R_PPC_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */ +#define R_PPC_TPREL32 73 /* word32 (sym+add)@tprel */ +#define R_PPC_DTPREL16 74 /* half16* (sym+add)@dtprel */ +#define R_PPC_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */ +#define R_PPC_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */ +#define R_PPC_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */ +#define R_PPC_DTPREL32 78 /* word32 (sym+add)@dtprel */ +#define R_PPC_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */ +#define R_PPC_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */ +#define R_PPC_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */ +#define R_PPC_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */ +#define R_PPC_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */ +#define R_PPC_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */ +#define R_PPC_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */ +#define R_PPC_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */ +#define R_PPC_GOT_TPREL16 87 /* half16* (sym+add)@got@tprel */ +#define R_PPC_GOT_TPREL16_LO 88 /* half16 (sym+add)@got@tprel@l */ +#define R_PPC_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */ +#define R_PPC_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */ +#define R_PPC_GOT_DTPREL16 91 /* half16* (sym+add)@got@dtprel */ +#define R_PPC_GOT_DTPREL16_LO 92 /* half16* (sym+add)@got@dtprel@l */ +#define R_PPC_GOT_DTPREL16_HI 93 /* half16* (sym+add)@got@dtprel@h */ +#define R_PPC_GOT_DTPREL16_HA 94 /* half16* (sym+add)@got@dtprel@ha */ + +/* keep this the last entry. */ +#define R_PPC_NUM 95 + +/* + * ELF register definitions.. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define ELF_NGREG 48 /* includes nip, msr, lr, etc. */ +#define ELF_NFPREG 33 /* includes fpscr */ + +typedef unsigned long elf_greg_t64; +typedef elf_greg_t64 elf_gregset_t64[ELF_NGREG]; + +typedef unsigned int elf_greg_t32; +typedef elf_greg_t32 elf_gregset_t32[ELF_NGREG]; +typedef elf_gregset_t32 compat_elf_gregset_t; + +/* + * ELF_ARCH, CLASS, and DATA are used to set parameters in the core dumps. + */ +#ifdef __powerpc64__ +# define ELF_NVRREG32 33 /* includes vscr & vrsave stuffed together */ +# define ELF_NVRREG 34 /* includes vscr & vrsave in split vectors */ +# define ELF_NVSRHALFREG 32 /* Half the vsx registers */ +# define ELF_GREG_TYPE elf_greg_t64 +#else +# define ELF_NEVRREG 34 /* includes acc (as 2) */ +# define ELF_NVRREG 33 /* includes vscr */ +# define ELF_GREG_TYPE elf_greg_t32 +# define ELF_ARCH EM_PPC +# define ELF_CLASS ELFCLASS32 +# define ELF_DATA ELFDATA2MSB +#endif /* __powerpc64__ */ + +#ifndef ELF_ARCH +# define ELF_ARCH EM_PPC64 +# define ELF_CLASS ELFCLASS64 +# define ELF_DATA ELFDATA2MSB + typedef elf_greg_t64 elf_greg_t; + typedef elf_gregset_t64 elf_gregset_t; +#else + /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */ + typedef elf_greg_t32 elf_greg_t; + typedef elf_gregset_t32 elf_gregset_t; +#endif /* ELF_ARCH */ + +/* Floating point registers */ +typedef double elf_fpreg_t; +typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; + +/* Altivec registers */ +/* + * The entries with indexes 0-31 contain the corresponding vector registers. + * The entry with index 32 contains the vscr as the last word (offset 12) + * within the quadword. This allows the vscr to be stored as either a + * quadword (since it must be copied via a vector register to/from storage) + * or as a word. + * + * 64-bit kernel notes: The entry at index 33 contains the vrsave as the first + * word (offset 0) within the quadword. + * + * This definition of the VMX state is compatible with the current PPC32 + * ptrace interface. This allows signal handling and ptrace to use the same + * structures. This also simplifies the implementation of a bi-arch + * (combined (32- and 64-bit) gdb. + * + * Note that it's _not_ compatible with 32 bits ucontext which stuffs the + * vrsave along with vscr and so only uses 33 vectors for the register set + */ +typedef __vector128 elf_vrreg_t; +typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG]; +#ifdef __powerpc64__ +typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32]; +typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG]; +#endif + +#ifdef __KERNEL__ +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH) +#define compat_elf_check_arch(x) ((x)->e_machine == EM_PPC) + +#define USE_ELF_CORE_DUMP +#define CORE_DUMP_USE_REGSET +#define ELF_EXEC_PAGESIZE PAGE_SIZE + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE (0x20000000) + +/* + * Our registers are always unsigned longs, whether we're a 32 bit + * process or 64 bit, on either a 64 bit or 32 bit kernel. + * + * This macro relies on elf_regs[i] having the right type to truncate to, + * either u32 or u64. It defines the body of the elf_core_copy_regs + * function, either the native one with elf_gregset_t elf_regs or + * the 32-bit one with elf_gregset_t32 elf_regs. + */ +#define PPC_ELF_CORE_COPY_REGS(elf_regs, regs) \ + int i, nregs = min(sizeof(*regs) / sizeof(unsigned long), \ + (size_t)ELF_NGREG); \ + for (i = 0; i < nregs; i++) \ + elf_regs[i] = ((unsigned long *) regs)[i]; \ + memset(&elf_regs[i], 0, (ELF_NGREG - i) * sizeof(elf_regs[0])) + +/* Common routine for both 32-bit and 64-bit native processes */ +static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs, + struct pt_regs *regs) +{ + PPC_ELF_CORE_COPY_REGS(elf_regs, regs); +} +#define ELF_CORE_COPY_REGS(gregs, regs) ppc_elf_core_copy_regs(gregs, regs); + +typedef elf_vrregset_t elf_fpxregset_t; + +/* ELF_HWCAP yields a mask that user programs can use to figure out what + instruction set this cpu supports. This could be done in userspace, + but it's not easy, and we've already done it here. */ +# define ELF_HWCAP (cur_cpu_spec->cpu_user_features) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (cur_cpu_spec->platform) + +/* While ELF_PLATFORM indicates the ISA supported by the platform, it + * may not accurately reflect the underlying behavior of the hardware + * (as in the case of running in Power5+ compatibility mode on a + * Power6 machine). ELF_BASE_PLATFORM allows ld.so to load libraries + * that are tuned for the real hardware. + */ +#define ELF_BASE_PLATFORM (powerpc_base_platform) + +#ifdef __powerpc64__ +# define ELF_PLAT_INIT(_r, load_addr) do { \ + _r->gpr[2] = load_addr; \ +} while (0) +#endif /* __powerpc64__ */ + +#ifdef __powerpc64__ +# define SET_PERSONALITY(ex, ibcs2) \ +do { \ + unsigned long new_flags = 0; \ + if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ + new_flags = _TIF_32BIT; \ + if ((current_thread_info()->flags & _TIF_32BIT) \ + != new_flags) \ + set_thread_flag(TIF_ABI_PENDING); \ + else \ + clear_thread_flag(TIF_ABI_PENDING); \ + if (personality(current->personality) != PER_LINUX32) \ + set_personality(PER_LINUX | \ + (current->personality & (~PER_MASK))); \ +} while (0) +/* + * An executable for which elf_read_implies_exec() returns TRUE will + * have the READ_IMPLIES_EXEC personality flag set automatically. This + * is only required to work around bugs in old 32bit toolchains. Since + * the 64bit ABI has never had these issues dont enable the workaround + * even if we have an executable stack. + */ +# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \ + (exec_stk != EXSTACK_DISABLE_X) : 0) +#else +# define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) +#endif /* __powerpc64__ */ + +extern int dcache_bsize; +extern int icache_bsize; +extern int ucache_bsize; + +/* vDSO has arch_setup_additional_pages */ +#define ARCH_HAS_SETUP_ADDITIONAL_PAGES +struct linux_binprm; +extern int arch_setup_additional_pages(struct linux_binprm *bprm, + int executable_stack); +#define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b); + +#endif /* __KERNEL__ */ + +/* + * The requirements here are: + * - keep the final alignment of sp (sp & 0xf) + * - make sure the 32-bit value at the first 16 byte aligned position of + * AUXV is greater than 16 for glibc compatibility. + * AT_IGNOREPPC is used for that. + * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC, + * even if DLINFO_ARCH_ITEMS goes to zero or is undefined. + * update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes + */ +#define ARCH_DLINFO \ +do { \ + /* Handle glibc compatibility. */ \ + NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \ + NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \ + /* Cache size items */ \ + NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize); \ + NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize); \ + NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize); \ + VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base) \ +} while (0) + +/* PowerPC64 relocations defined by the ABIs */ +#define R_PPC64_NONE R_PPC_NONE +#define R_PPC64_ADDR32 R_PPC_ADDR32 /* 32bit absolute address. */ +#define R_PPC64_ADDR24 R_PPC_ADDR24 /* 26bit address, word aligned. */ +#define R_PPC64_ADDR16 R_PPC_ADDR16 /* 16bit absolute address. */ +#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of abs. address. */ +#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of abs. address. */ +#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits. */ +#define R_PPC64_ADDR14 R_PPC_ADDR14 /* 16bit address, word aligned. */ +#define R_PPC64_ADDR14_BRTAKEN R_PPC_ADDR14_BRTAKEN +#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN +#define R_PPC64_REL24 R_PPC_REL24 /* PC relative 26 bit, word aligned. */ +#define R_PPC64_REL14 R_PPC_REL14 /* PC relative 16 bit. */ +#define R_PPC64_REL14_BRTAKEN R_PPC_REL14_BRTAKEN +#define R_PPC64_REL14_BRNTAKEN R_PPC_REL14_BRNTAKEN +#define R_PPC64_GOT16 R_PPC_GOT16 +#define R_PPC64_GOT16_LO R_PPC_GOT16_LO +#define R_PPC64_GOT16_HI R_PPC_GOT16_HI +#define R_PPC64_GOT16_HA R_PPC_GOT16_HA + +#define R_PPC64_COPY R_PPC_COPY +#define R_PPC64_GLOB_DAT R_PPC_GLOB_DAT +#define R_PPC64_JMP_SLOT R_PPC_JMP_SLOT +#define R_PPC64_RELATIVE R_PPC_RELATIVE + +#define R_PPC64_UADDR32 R_PPC_UADDR32 +#define R_PPC64_UADDR16 R_PPC_UADDR16 +#define R_PPC64_REL32 R_PPC_REL32 +#define R_PPC64_PLT32 R_PPC_PLT32 +#define R_PPC64_PLTREL32 R_PPC_PLTREL32 +#define R_PPC64_PLT16_LO R_PPC_PLT16_LO +#define R_PPC64_PLT16_HI R_PPC_PLT16_HI +#define R_PPC64_PLT16_HA R_PPC_PLT16_HA + +#define R_PPC64_SECTOFF R_PPC_SECTOFF +#define R_PPC64_SECTOFF_LO R_PPC_SECTOFF_LO +#define R_PPC64_SECTOFF_HI R_PPC_SECTOFF_HI +#define R_PPC64_SECTOFF_HA R_PPC_SECTOFF_HA +#define R_PPC64_ADDR30 37 /* word30 (S + A - P) >> 2. */ +#define R_PPC64_ADDR64 38 /* doubleword64 S + A. */ +#define R_PPC64_ADDR16_HIGHER 39 /* half16 #higher(S + A). */ +#define R_PPC64_ADDR16_HIGHERA 40 /* half16 #highera(S + A). */ +#define R_PPC64_ADDR16_HIGHEST 41 /* half16 #highest(S + A). */ +#define R_PPC64_ADDR16_HIGHESTA 42 /* half16 #highesta(S + A). */ +#define R_PPC64_UADDR64 43 /* doubleword64 S + A. */ +#define R_PPC64_REL64 44 /* doubleword64 S + A - P. */ +#define R_PPC64_PLT64 45 /* doubleword64 L + A. */ +#define R_PPC64_PLTREL64 46 /* doubleword64 L + A - P. */ +#define R_PPC64_TOC16 47 /* half16* S + A - .TOC. */ +#define R_PPC64_TOC16_LO 48 /* half16 #lo(S + A - .TOC.). */ +#define R_PPC64_TOC16_HI 49 /* half16 #hi(S + A - .TOC.). */ +#define R_PPC64_TOC16_HA 50 /* half16 #ha(S + A - .TOC.). */ +#define R_PPC64_TOC 51 /* doubleword64 .TOC. */ +#define R_PPC64_PLTGOT16 52 /* half16* M + A. */ +#define R_PPC64_PLTGOT16_LO 53 /* half16 #lo(M + A). */ +#define R_PPC64_PLTGOT16_HI 54 /* half16 #hi(M + A). */ +#define R_PPC64_PLTGOT16_HA 55 /* half16 #ha(M + A). */ + +#define R_PPC64_ADDR16_DS 56 /* half16ds* (S + A) >> 2. */ +#define R_PPC64_ADDR16_LO_DS 57 /* half16ds #lo(S + A) >> 2. */ +#define R_PPC64_GOT16_DS 58 /* half16ds* (G + A) >> 2. */ +#define R_PPC64_GOT16_LO_DS 59 /* half16ds #lo(G + A) >> 2. */ +#define R_PPC64_PLT16_LO_DS 60 /* half16ds #lo(L + A) >> 2. */ +#define R_PPC64_SECTOFF_DS 61 /* half16ds* (R + A) >> 2. */ +#define R_PPC64_SECTOFF_LO_DS 62 /* half16ds #lo(R + A) >> 2. */ +#define R_PPC64_TOC16_DS 63 /* half16ds* (S + A - .TOC.) >> 2. */ +#define R_PPC64_TOC16_LO_DS 64 /* half16ds #lo(S + A - .TOC.) >> 2. */ +#define R_PPC64_PLTGOT16_DS 65 /* half16ds* (M + A) >> 2. */ +#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds #lo(M + A) >> 2. */ + +/* PowerPC64 relocations defined for the TLS access ABI. */ +#define R_PPC64_TLS 67 /* none (sym+add)@tls */ +#define R_PPC64_DTPMOD64 68 /* doubleword64 (sym+add)@dtpmod */ +#define R_PPC64_TPREL16 69 /* half16* (sym+add)@tprel */ +#define R_PPC64_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */ +#define R_PPC64_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */ +#define R_PPC64_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */ +#define R_PPC64_TPREL64 73 /* doubleword64 (sym+add)@tprel */ +#define R_PPC64_DTPREL16 74 /* half16* (sym+add)@dtprel */ +#define R_PPC64_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */ +#define R_PPC64_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */ +#define R_PPC64_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */ +#define R_PPC64_DTPREL64 78 /* doubleword64 (sym+add)@dtprel */ +#define R_PPC64_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */ +#define R_PPC64_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */ +#define R_PPC64_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */ +#define R_PPC64_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */ +#define R_PPC64_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */ +#define R_PPC64_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */ +#define R_PPC64_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */ +#define R_PPC64_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */ +#define R_PPC64_GOT_TPREL16_DS 87 /* half16ds* (sym+add)@got@tprel */ +#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */ +#define R_PPC64_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */ +#define R_PPC64_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */ +#define R_PPC64_GOT_DTPREL16_DS 91 /* half16ds* (sym+add)@got@dtprel */ +#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */ +#define R_PPC64_GOT_DTPREL16_HI 93 /* half16 (sym+add)@got@dtprel@h */ +#define R_PPC64_GOT_DTPREL16_HA 94 /* half16 (sym+add)@got@dtprel@ha */ +#define R_PPC64_TPREL16_DS 95 /* half16ds* (sym+add)@tprel */ +#define R_PPC64_TPREL16_LO_DS 96 /* half16ds (sym+add)@tprel@l */ +#define R_PPC64_TPREL16_HIGHER 97 /* half16 (sym+add)@tprel@higher */ +#define R_PPC64_TPREL16_HIGHERA 98 /* half16 (sym+add)@tprel@highera */ +#define R_PPC64_TPREL16_HIGHEST 99 /* half16 (sym+add)@tprel@highest */ +#define R_PPC64_TPREL16_HIGHESTA 100 /* half16 (sym+add)@tprel@highesta */ +#define R_PPC64_DTPREL16_DS 101 /* half16ds* (sym+add)@dtprel */ +#define R_PPC64_DTPREL16_LO_DS 102 /* half16ds (sym+add)@dtprel@l */ +#define R_PPC64_DTPREL16_HIGHER 103 /* half16 (sym+add)@dtprel@higher */ +#define R_PPC64_DTPREL16_HIGHERA 104 /* half16 (sym+add)@dtprel@highera */ +#define R_PPC64_DTPREL16_HIGHEST 105 /* half16 (sym+add)@dtprel@highest */ +#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16 (sym+add)@dtprel@highesta */ + +/* Keep this the last entry. */ +#define R_PPC64_NUM 107 + +#ifdef __KERNEL__ + +#ifdef CONFIG_SPU_BASE +/* Notes used in ET_CORE. Note name is "SPU//". */ +#define NT_SPU 1 + +#define ARCH_HAVE_EXTRA_ELF_NOTES + +#endif /* CONFIG_SPU_BASE */ + +#endif /* __KERNEL */ + +#endif /* _ASM_POWERPC_ELF_H */ diff --git a/arch/powerpc/include/asm/emergency-restart.h b/arch/powerpc/include/asm/emergency-restart.h new file mode 100644 index 000000000000..3711bd9d50bd --- /dev/null +++ b/arch/powerpc/include/asm/emergency-restart.h @@ -0,0 +1 @@ +#include diff --git a/arch/powerpc/include/asm/errno.h b/arch/powerpc/include/asm/errno.h new file mode 100644 index 000000000000..8c145fd17d86 --- /dev/null +++ b/arch/powerpc/include/asm/errno.h @@ -0,0 +1,11 @@ +#ifndef _ASM_POWERPC_ERRNO_H +#define _ASM_POWERPC_ERRNO_H + +#include + +#undef EDEADLOCK +#define EDEADLOCK 58 /* File locking deadlock error */ + +#define _LAST_ERRNO 516 + +#endif /* _ASM_POWERPC_ERRNO_H */ diff --git a/arch/powerpc/include/asm/exception.h b/arch/powerpc/include/asm/exception.h new file mode 100644 index 000000000000..329148b5acc6 --- /dev/null +++ b/arch/powerpc/include/asm/exception.h @@ -0,0 +1,311 @@ +#ifndef _ASM_POWERPC_EXCEPTION_H +#define _ASM_POWERPC_EXCEPTION_H +/* + * Extracted from head_64.S + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP + * Copyright (C) 1996 Cort Dougan + * Adapted for Power Macintosh by Paul Mackerras. + * Low-level exception handlers and MMU support + * rewritten by Paul Mackerras. + * Copyright (C) 1996 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com + * + * This file contains the low-level support and setup for the + * PowerPC-64 platform, including trap and interrupt dispatch. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +/* + * The following macros define the code that appears as + * the prologue to each of the exception handlers. They + * are split into two parts to allow a single kernel binary + * to be used for pSeries and iSeries. + * + * We make as much of the exception code common between native + * exception handlers (including pSeries LPAR) and iSeries LPAR + * implementations as possible. + */ + +#define EX_R9 0 +#define EX_R10 8 +#define EX_R11 16 +#define EX_R12 24 +#define EX_R13 32 +#define EX_SRR0 40 +#define EX_DAR 48 +#define EX_DSISR 56 +#define EX_CCR 60 +#define EX_R3 64 +#define EX_LR 72 + +/* + * We're short on space and time in the exception prolog, so we can't + * use the normal SET_REG_IMMEDIATE macro. Normally we just need the + * low halfword of the address, but for Kdump we need the whole low + * word. + */ +#ifdef CONFIG_CRASH_DUMP +#define LOAD_HANDLER(reg, label) \ + oris reg,reg,(label)@h; /* virt addr of handler ... */ \ + ori reg,reg,(label)@l; /* .. and the rest */ +#else +#define LOAD_HANDLER(reg, label) \ + ori reg,reg,(label)@l; /* virt addr of handler ... */ +#endif + +#define EXCEPTION_PROLOG_1(area) \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,area+EX_R9(r13); /* save r9 - r12 */ \ + std r10,area+EX_R10(r13); \ + std r11,area+EX_R11(r13); \ + std r12,area+EX_R12(r13); \ + mfspr r9,SPRN_SPRG1; \ + std r9,area+EX_R13(r13); \ + mfcr r9 + +/* + * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode. + * The firmware calls the registered system_reset_fwnmi and + * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run + * a 32bit application at the time of the event. + * This firmware bug is present on POWER4 and JS20. + */ +#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label) \ + EXCEPTION_PROLOG_1(area); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + /* force 64bit mode */ \ + li r11,5; /* MSR_SF_LG|MSR_ISF_LG */ \ + rldimi r10,r11,61,0; /* insert into top 3 bits */ \ + /* done 64bit mode */ \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +#define EXCEPTION_PROLOG_PSERIES(area, label) \ + EXCEPTION_PROLOG_1(area); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +/* + * The common exception prolog is used for all except a few exceptions + * such as a segment miss on a kernel address. We have to be prepared + * to take another exception from the point where we first touch the + * kernel stack onwards. + * + * On entry r13 points to the paca, r9-r13 are saved in the paca, + * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and + * SRR1, and relocation is on. + */ +#define EXCEPTION_PROLOG_COMMON(n, area) \ + andi. r10,r12,MSR_PR; /* See if coming from user */ \ + mr r10,r1; /* Save r1 */ \ + subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ + beq- 1f; \ + ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ +1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ + bge- cr1,2f; /* abort if it is */ \ + b 3f; \ +2: li r1,(n); /* will be reloaded later */ \ + sth r1,PACA_TRAP_SAVE(r13); \ + b bad_stack; \ +3: std r9,_CCR(r1); /* save CR in stackframe */ \ + std r11,_NIP(r1); /* save SRR0 in stackframe */ \ + std r12,_MSR(r1); /* save SRR1 in stackframe */ \ + std r10,0(r1); /* make stack chain pointer */ \ + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r10,GPR1(r1); /* save r1 in stackframe */ \ + ACCOUNT_CPU_USER_ENTRY(r9, r10); \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ + ld r10,area+EX_R10(r13); \ + std r9,GPR9(r1); \ + std r10,GPR10(r1); \ + ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \ + ld r10,area+EX_R12(r13); \ + ld r11,area+EX_R13(r13); \ + std r9,GPR11(r1); \ + std r10,GPR12(r1); \ + std r11,GPR13(r1); \ + ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ + mflr r9; /* save LR in stackframe */ \ + std r9,_LINK(r1); \ + mfctr r10; /* save CTR in stackframe */ \ + std r10,_CTR(r1); \ + lbz r10,PACASOFTIRQEN(r13); \ + mfspr r11,SPRN_XER; /* save XER in stackframe */ \ + std r10,SOFTE(r1); \ + std r11,_XER(r1); \ + li r9,(n)+1; \ + std r9,_TRAP(r1); /* set trap number */ \ + li r10,0; \ + ld r11,exception_marker@toc(r2); \ + std r10,RESULT(r1); /* clear regs->result */ \ + std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ + +/* + * Exception vectors. + */ +#define STD_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) + +#define HSTD_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r20; /* save r20 */ \ + mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \ + mtspr SPRN_SRR0,r20; \ + mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \ + mtspr SPRN_SRR1,r20; \ + mfspr r20,SPRN_SPRG1; /* restore r20 */ \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) + + +#define MASKABLE_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \ + std r10,PACA_EXGEN+EX_R10(r13); \ + lbz r10,PACASOFTIRQEN(r13); \ + mfcr r9; \ + cmpwi r10,0; \ + beq masked_interrupt; \ + mfspr r10,SPRN_SPRG1; \ + std r10,PACA_EXGEN+EX_R13(r13); \ + std r11,PACA_EXGEN+EX_R11(r13); \ + std r12,PACA_EXGEN+EX_R12(r13); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label##_common) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +#ifdef CONFIG_PPC_ISERIES +#define DISABLE_INTS \ + li r11,0; \ + stb r11,PACASOFTIRQEN(r13); \ +BEGIN_FW_FTR_SECTION; \ + stb r11,PACAHARDIRQEN(r13); \ +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ + TRACE_DISABLE_INTS; \ +BEGIN_FW_FTR_SECTION; \ + mfmsr r10; \ + ori r10,r10,MSR_EE; \ + mtmsrd r10,1; \ +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) +#else +#define DISABLE_INTS \ + li r11,0; \ + stb r11,PACASOFTIRQEN(r13); \ + stb r11,PACAHARDIRQEN(r13); \ + TRACE_DISABLE_INTS +#endif /* CONFIG_PPC_ISERIES */ + +#define ENABLE_INTS \ + ld r12,_MSR(r1); \ + mfmsr r11; \ + rlwimi r11,r12,0,MSR_EE; \ + mtmsrd r11,1 + +#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + DISABLE_INTS; \ + bl .save_nvgprs; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except + +/* + * Like STD_EXCEPTION_COMMON, but for exceptions that can occur + * in the idle task and therefore need the special idle handling. + */ +#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + FINISH_NAP; \ + DISABLE_INTS; \ + bl .save_nvgprs; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except + +#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + FINISH_NAP; \ + DISABLE_INTS; \ +BEGIN_FTR_SECTION \ + bl .ppc64_runlatch_on; \ +END_FTR_SECTION_IFSET(CPU_FTR_CTRL) \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except_lite + +/* + * When the idle code in power4_idle puts the CPU into NAP mode, + * it has to do so in a loop, and relies on the external interrupt + * and decrementer interrupt entry code to get it out of the loop. + * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags + * to signal that it is in the loop and needs help to get out. + */ +#ifdef CONFIG_PPC_970_NAP +#define FINISH_NAP \ +BEGIN_FTR_SECTION \ + clrrdi r11,r1,THREAD_SHIFT; \ + ld r9,TI_LOCAL_FLAGS(r11); \ + andi. r10,r9,_TLF_NAPPING; \ + bnel power4_fixup_nap; \ +END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) +#else +#define FINISH_NAP +#endif + +#endif /* _ASM_POWERPC_EXCEPTION_H */ diff --git a/arch/powerpc/include/asm/fb.h b/arch/powerpc/include/asm/fb.h new file mode 100644 index 000000000000..411af8d17a69 --- /dev/null +++ b/arch/powerpc/include/asm/fb.h @@ -0,0 +1,21 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include +#include +#include + +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + vma->vm_page_prot = phys_mem_access_prot(file, off >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +} + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/powerpc/include/asm/fcntl.h b/arch/powerpc/include/asm/fcntl.h new file mode 100644 index 000000000000..ce5c4516d404 --- /dev/null +++ b/arch/powerpc/include/asm/fcntl.h @@ -0,0 +1,11 @@ +#ifndef _ASM_FCNTL_H +#define _ASM_FCNTL_H + +#define O_DIRECTORY 040000 /* must be a directory */ +#define O_NOFOLLOW 0100000 /* don't follow links */ +#define O_LARGEFILE 0200000 +#define O_DIRECT 0400000 /* direct disk access hint */ + +#include + +#endif /* _ASM_FCNTL_H */ diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h new file mode 100644 index 000000000000..a1029967620b --- /dev/null +++ b/arch/powerpc/include/asm/feature-fixups.h @@ -0,0 +1,126 @@ +#ifndef __ASM_POWERPC_FEATURE_FIXUPS_H +#define __ASM_POWERPC_FEATURE_FIXUPS_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __ASSEMBLY__ + +/* + * Feature section common macros + * + * Note that the entries now contain offsets between the table entry + * and the code rather than absolute code pointers in order to be + * useable with the vdso shared library. There is also an assumption + * that values will be negative, that is, the fixup table has to be + * located after the code it fixes up. + */ +#if defined(CONFIG_PPC64) && !defined(__powerpc64__) +/* 64 bits kernel, 32 bits code (ie. vdso32) */ +#define FTR_ENTRY_LONG .llong +#define FTR_ENTRY_OFFSET .long 0xffffffff; .long +#else +/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */ +#define FTR_ENTRY_LONG PPC_LONG +#define FTR_ENTRY_OFFSET PPC_LONG +#endif + +#define START_FTR_SECTION(label) label##1: + +#define FTR_SECTION_ELSE_NESTED(label) \ +label##2: \ + .pushsection __ftr_alt_##label,"a"; \ + .align 2; \ +label##3: + +#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ +label##4: \ + .popsection; \ + .pushsection sect,"a"; \ + .align 3; \ +label##5: \ + FTR_ENTRY_LONG msk; \ + FTR_ENTRY_LONG val; \ + FTR_ENTRY_OFFSET label##1b-label##5b; \ + FTR_ENTRY_OFFSET label##2b-label##5b; \ + FTR_ENTRY_OFFSET label##3b-label##5b; \ + FTR_ENTRY_OFFSET label##4b-label##5b; \ + .popsection; + + +/* CPU feature dependent sections */ +#define BEGIN_FTR_SECTION_NESTED(label) START_FTR_SECTION(label) +#define BEGIN_FTR_SECTION START_FTR_SECTION(97) + +#define END_FTR_SECTION_NESTED(msk, val, label) \ + FTR_SECTION_ELSE_NESTED(label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) + +#define END_FTR_SECTION(msk, val) \ + END_FTR_SECTION_NESTED(msk, val, 97) + +#define END_FTR_SECTION_IFSET(msk) END_FTR_SECTION((msk), (msk)) +#define END_FTR_SECTION_IFCLR(msk) END_FTR_SECTION((msk), 0) + +/* CPU feature sections with alternatives, use BEGIN_FTR_SECTION to start */ +#define FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97) +#define ALT_FTR_SECTION_END_NESTED(msk, val, label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) +#define ALT_FTR_SECTION_END_NESTED_IFSET(msk, label) \ + ALT_FTR_SECTION_END_NESTED(msk, msk, label) +#define ALT_FTR_SECTION_END_NESTED_IFCLR(msk, label) \ + ALT_FTR_SECTION_END_NESTED(msk, 0, label) +#define ALT_FTR_SECTION_END(msk, val) \ + ALT_FTR_SECTION_END_NESTED(msk, val, 97) +#define ALT_FTR_SECTION_END_IFSET(msk) \ + ALT_FTR_SECTION_END_NESTED_IFSET(msk, 97) +#define ALT_FTR_SECTION_END_IFCLR(msk) \ + ALT_FTR_SECTION_END_NESTED_IFCLR(msk, 97) + +/* Firmware feature dependent sections */ +#define BEGIN_FW_FTR_SECTION_NESTED(label) START_FTR_SECTION(label) +#define BEGIN_FW_FTR_SECTION START_FTR_SECTION(97) + +#define END_FW_FTR_SECTION_NESTED(msk, val, label) \ + FTR_SECTION_ELSE_NESTED(label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) + +#define END_FW_FTR_SECTION(msk, val) \ + END_FW_FTR_SECTION_NESTED(msk, val, 97) + +#define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk)) +#define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0) + +/* Firmware feature sections with alternatives */ +#define FW_FTR_SECTION_ELSE_NESTED(label) FTR_SECTION_ELSE_NESTED(label) +#define FW_FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97) +#define ALT_FW_FTR_SECTION_END_NESTED(msk, val, label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) +#define ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, label) \ + ALT_FW_FTR_SECTION_END_NESTED(msk, msk, label) +#define ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, label) \ + ALT_FW_FTR_SECTION_END_NESTED(msk, 0, label) +#define ALT_FW_FTR_SECTION_END(msk, val) \ + ALT_FW_FTR_SECTION_END_NESTED(msk, val, 97) +#define ALT_FW_FTR_SECTION_END_IFSET(msk) \ + ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, 97) +#define ALT_FW_FTR_SECTION_END_IFCLR(msk) \ + ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97) + +#endif /* __ASSEMBLY__ */ + +/* LWSYNC feature sections */ +#define START_LWSYNC_SECTION(label) label##1: +#define MAKE_LWSYNC_SECTION_ENTRY(label, sect) \ +label##2: \ + .pushsection sect,"a"; \ + .align 2; \ +label##3: \ + .long label##1b-label##3b; \ + .popsection; + +#endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */ diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h new file mode 100644 index 000000000000..3a179827528d --- /dev/null +++ b/arch/powerpc/include/asm/firmware.h @@ -0,0 +1,132 @@ +/* + * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * Modifications for ppc64: + * Copyright (C) 2003 Dave Engebretsen + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_POWERPC_FIRMWARE_H +#define __ASM_POWERPC_FIRMWARE_H + +#ifdef __KERNEL__ + +#include +#include + +/* firmware feature bitmask values */ +#define FIRMWARE_MAX_FEATURES 63 + +#define FW_FEATURE_PFT ASM_CONST(0x0000000000000001) +#define FW_FEATURE_TCE ASM_CONST(0x0000000000000002) +#define FW_FEATURE_SPRG0 ASM_CONST(0x0000000000000004) +#define FW_FEATURE_DABR ASM_CONST(0x0000000000000008) +#define FW_FEATURE_COPY ASM_CONST(0x0000000000000010) +#define FW_FEATURE_ASR ASM_CONST(0x0000000000000020) +#define FW_FEATURE_DEBUG ASM_CONST(0x0000000000000040) +#define FW_FEATURE_TERM ASM_CONST(0x0000000000000080) +#define FW_FEATURE_PERF ASM_CONST(0x0000000000000100) +#define FW_FEATURE_DUMP ASM_CONST(0x0000000000000200) +#define FW_FEATURE_INTERRUPT ASM_CONST(0x0000000000000400) +#define FW_FEATURE_MIGRATE ASM_CONST(0x0000000000000800) +#define FW_FEATURE_PERFMON ASM_CONST(0x0000000000001000) +#define FW_FEATURE_CRQ ASM_CONST(0x0000000000002000) +#define FW_FEATURE_VIO ASM_CONST(0x0000000000004000) +#define FW_FEATURE_RDMA ASM_CONST(0x0000000000008000) +#define FW_FEATURE_LLAN ASM_CONST(0x0000000000010000) +#define FW_FEATURE_BULK ASM_CONST(0x0000000000020000) +#define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000) +#define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000) +#define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000) +#define FW_FEATURE_ISERIES ASM_CONST(0x0000000000200000) +#define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000) +#define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000) +#define FW_FEATURE_BEAT ASM_CONST(0x0000000001000000) +#define FW_FEATURE_BULK_REMOVE ASM_CONST(0x0000000002000000) +#define FW_FEATURE_CMO ASM_CONST(0x0000000004000000) + +#ifndef __ASSEMBLY__ + +enum { +#ifdef CONFIG_PPC64 + FW_FEATURE_PSERIES_POSSIBLE = FW_FEATURE_PFT | FW_FEATURE_TCE | + FW_FEATURE_SPRG0 | FW_FEATURE_DABR | FW_FEATURE_COPY | + FW_FEATURE_ASR | FW_FEATURE_DEBUG | FW_FEATURE_TERM | + FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT | + FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ | + FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN | + FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE | + FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO, + FW_FEATURE_PSERIES_ALWAYS = 0, + FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, + FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, + FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, + FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, + FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT, + FW_FEATURE_CELLEB_ALWAYS = 0, + FW_FEATURE_NATIVE_POSSIBLE = 0, + FW_FEATURE_NATIVE_ALWAYS = 0, + FW_FEATURE_POSSIBLE = +#ifdef CONFIG_PPC_PSERIES + FW_FEATURE_PSERIES_POSSIBLE | +#endif +#ifdef CONFIG_PPC_ISERIES + FW_FEATURE_ISERIES_POSSIBLE | +#endif +#ifdef CONFIG_PPC_PS3 + FW_FEATURE_PS3_POSSIBLE | +#endif +#ifdef CONFIG_PPC_CELLEB + FW_FEATURE_CELLEB_POSSIBLE | +#endif +#ifdef CONFIG_PPC_NATIVE + FW_FEATURE_NATIVE_ALWAYS | +#endif + 0, + FW_FEATURE_ALWAYS = +#ifdef CONFIG_PPC_PSERIES + FW_FEATURE_PSERIES_ALWAYS & +#endif +#ifdef CONFIG_PPC_ISERIES + FW_FEATURE_ISERIES_ALWAYS & +#endif +#ifdef CONFIG_PPC_PS3 + FW_FEATURE_PS3_ALWAYS & +#endif +#ifdef CONFIG_PPC_CELLEB + FW_FEATURE_CELLEB_ALWAYS & +#endif +#ifdef CONFIG_PPC_NATIVE + FW_FEATURE_NATIVE_ALWAYS & +#endif + FW_FEATURE_POSSIBLE, + +#else /* CONFIG_PPC64 */ + FW_FEATURE_POSSIBLE = 0, + FW_FEATURE_ALWAYS = 0, +#endif +}; + +/* This is used to identify firmware features which are available + * to the kernel. + */ +extern unsigned long powerpc_firmware_features; + +#define firmware_has_feature(feature) \ + ((FW_FEATURE_ALWAYS & (feature)) || \ + (FW_FEATURE_POSSIBLE & powerpc_firmware_features & (feature))) + +extern void system_reset_fwnmi(void); +extern void machine_check_fwnmi(void); + +/* This is true if we are using the firmware NMI handler (typically LPAR) */ +extern int fwnmi_active; + +extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup; + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_FIRMWARE_H */ diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h new file mode 100644 index 000000000000..8428b38a3d30 --- /dev/null +++ b/arch/powerpc/include/asm/fixmap.h @@ -0,0 +1,106 @@ +/* + * fixmap.h: compile-time virtual memory allocation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Ingo Molnar + * + * Copyright 2008 Freescale Semiconductor Inc. + * Port to powerpc added by Kumar Gala + */ + +#ifndef _ASM_FIXMAP_H +#define _ASM_FIXMAP_H + +extern unsigned long FIXADDR_TOP; + +#ifndef __ASSEMBLY__ +#include +#include +#ifdef CONFIG_HIGHMEM +#include +#include +#endif + +/* + * Here we define all the compile-time 'special' virtual + * addresses. The point is to have a constant address at + * compile time, but to set the physical address only + * in the boot process. We allocate these special addresses + * from the end of virtual memory (0xfffff000) backwards. + * Also this lets us do fail-safe vmalloc(), we + * can guarantee that these special addresses and + * vmalloc()-ed addresses never overlap. + * + * these 'compile-time allocated' memory buffers are + * fixed-size 4k pages. (or larger if used with an increment + * highger than 1) use fixmap_set(idx,phys) to associate + * physical memory with fixmap indices. + * + * TLB entries of such buffers will not be flushed across + * task switches. + */ +enum fixed_addresses { + FIX_HOLE, +#ifdef CONFIG_HIGHMEM + FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ + FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, +#endif + /* FIX_PCIE_MCFG, */ + __end_of_fixed_addresses +}; + +extern void __set_fixmap (enum fixed_addresses idx, + phys_addr_t phys, pgprot_t flags); + +#define set_fixmap(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL) +/* + * Some hardware wants to get fixmapped without caching. + */ +#define set_fixmap_nocache(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) + +#define clear_fixmap(idx) \ + __set_fixmap(idx, 0, __pgprot(0)) + +#define __FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) +#define FIXADDR_START (FIXADDR_TOP - __FIXADDR_SIZE) + +#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) +#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) + +extern void __this_fixmap_does_not_exist(void); + +/* + * 'index to address' translation. If anyone tries to use the idx + * directly without tranlation, we catch the bug with a NULL-deference + * kernel oops. Illegal ranges of incoming indices are caught too. + */ +static __always_inline unsigned long fix_to_virt(const unsigned int idx) +{ + /* + * this branch gets completely eliminated after inlining, + * except when someone tries to use fixaddr indices in an + * illegal way. (such as mixing up address types or using + * out-of-range indices). + * + * If it doesn't get removed, the linker will complain + * loudly with a reasonably clear error message.. + */ + if (idx >= __end_of_fixed_addresses) + __this_fixmap_does_not_exist(); + + return __fix_to_virt(idx); +} + +static inline unsigned long virt_to_fix(const unsigned long vaddr) +{ + BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); + return __virt_to_fix(vaddr); +} + +#endif /* !__ASSEMBLY__ */ +#endif diff --git a/arch/powerpc/include/asm/floppy.h b/arch/powerpc/include/asm/floppy.h new file mode 100644 index 000000000000..24bd34c57e9d --- /dev/null +++ b/arch/powerpc/include/asm/floppy.h @@ -0,0 +1,213 @@ +/* + * Architecture specific parts of the Floppy driver + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 + */ +#ifndef __ASM_POWERPC_FLOPPY_H +#define __ASM_POWERPC_FLOPPY_H +#ifdef __KERNEL__ + +#include + +#define fd_inb(port) inb_p(port) +#define fd_outb(value,port) outb_p(value,port) + +#define fd_enable_dma() enable_dma(FLOPPY_DMA) +#define fd_disable_dma() fd_ops->_disable_dma(FLOPPY_DMA) +#define fd_free_dma() fd_ops->_free_dma(FLOPPY_DMA) +#define fd_clear_dma_ff() clear_dma_ff(FLOPPY_DMA) +#define fd_set_dma_mode(mode) set_dma_mode(FLOPPY_DMA, mode) +#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count) +#define fd_get_dma_residue() fd_ops->_get_dma_residue(FLOPPY_DMA) +#define fd_enable_irq() enable_irq(FLOPPY_IRQ) +#define fd_disable_irq() disable_irq(FLOPPY_IRQ) +#define fd_cacheflush(addr,size) /* nothing */ +#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL); + +#include +#include /* for isa_bridge_pcidev */ + +#define fd_dma_setup(addr,size,mode,io) fd_ops->_dma_setup(addr,size,mode,io) + +static int fd_request_dma(void); + +struct fd_dma_ops { + void (*_disable_dma)(unsigned int dmanr); + void (*_free_dma)(unsigned int dmanr); + int (*_get_dma_residue)(unsigned int dummy); + int (*_dma_setup)(char *addr, unsigned long size, int mode, int io); +}; + +static int virtual_dma_count; +static int virtual_dma_residue; +static char *virtual_dma_addr; +static int virtual_dma_mode; +static int doing_vdma; +static struct fd_dma_ops *fd_ops; + +static irqreturn_t floppy_hardint(int irq, void *dev_id) +{ + unsigned char st; + int lcount; + char *lptr; + + if (!doing_vdma) + return floppy_interrupt(irq, dev_id); + + + st = 1; + for (lcount=virtual_dma_count, lptr=virtual_dma_addr; + lcount; lcount--, lptr++) { + st=inb(virtual_dma_port+4) & 0xa0 ; + if (st != 0xa0) + break; + if (virtual_dma_mode) + outb_p(*lptr, virtual_dma_port+5); + else + *lptr = inb_p(virtual_dma_port+5); + } + virtual_dma_count = lcount; + virtual_dma_addr = lptr; + st = inb(virtual_dma_port+4); + + if (st == 0x20) + return IRQ_HANDLED; + if (!(st & 0x20)) { + virtual_dma_residue += virtual_dma_count; + virtual_dma_count=0; + doing_vdma = 0; + floppy_interrupt(irq, dev_id); + return IRQ_HANDLED; + } + return IRQ_HANDLED; +} + +static void vdma_disable_dma(unsigned int dummy) +{ + doing_vdma = 0; + virtual_dma_residue += virtual_dma_count; + virtual_dma_count=0; +} + +static void vdma_nop(unsigned int dummy) +{ +} + + +static int vdma_get_dma_residue(unsigned int dummy) +{ + return virtual_dma_count + virtual_dma_residue; +} + + +static int fd_request_irq(void) +{ + if (can_use_virtual_dma) + return request_irq(FLOPPY_IRQ, floppy_hardint, + IRQF_DISABLED, "floppy", NULL); + else + return request_irq(FLOPPY_IRQ, floppy_interrupt, + IRQF_DISABLED, "floppy", NULL); +} + +static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) +{ + doing_vdma = 1; + virtual_dma_port = io; + virtual_dma_mode = (mode == DMA_MODE_WRITE); + virtual_dma_addr = addr; + virtual_dma_count = size; + virtual_dma_residue = 0; + return 0; +} + +static int hard_dma_setup(char *addr, unsigned long size, int mode, int io) +{ + static unsigned long prev_size; + static dma_addr_t bus_addr = 0; + static char *prev_addr; + static int prev_dir; + int dir; + + doing_vdma = 0; + dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE; + + if (bus_addr + && (addr != prev_addr || size != prev_size || dir != prev_dir)) { + /* different from last time -- unmap prev */ + pci_unmap_single(isa_bridge_pcidev, bus_addr, prev_size, prev_dir); + bus_addr = 0; + } + + if (!bus_addr) /* need to map it */ + bus_addr = pci_map_single(isa_bridge_pcidev, addr, size, dir); + + /* remember this one as prev */ + prev_addr = addr; + prev_size = size; + prev_dir = dir; + + fd_clear_dma_ff(); + fd_cacheflush(addr, size); + fd_set_dma_mode(mode); + set_dma_addr(FLOPPY_DMA, bus_addr); + fd_set_dma_count(size); + virtual_dma_port = io; + fd_enable_dma(); + + return 0; +} + +static struct fd_dma_ops real_dma_ops = +{ + ._disable_dma = disable_dma, + ._free_dma = free_dma, + ._get_dma_residue = get_dma_residue, + ._dma_setup = hard_dma_setup +}; + +static struct fd_dma_ops virt_dma_ops = +{ + ._disable_dma = vdma_disable_dma, + ._free_dma = vdma_nop, + ._get_dma_residue = vdma_get_dma_residue, + ._dma_setup = vdma_dma_setup +}; + +static int fd_request_dma(void) +{ + if (can_use_virtual_dma & 1) { + fd_ops = &virt_dma_ops; + return 0; + } + else { + fd_ops = &real_dma_ops; + return request_dma(FLOPPY_DMA, "floppy"); + } +} + +static int FDC1 = 0x3f0; +static int FDC2 = -1; + +/* + * Again, the CMOS information not available + */ +#define FLOPPY0_TYPE 6 +#define FLOPPY1_TYPE 0 + +#define N_FDC 2 /* Don't change this! */ +#define N_DRIVE 8 + +/* + * The PowerPC has no problems with floppy DMA crossing 64k borders. + */ +#define CROSS_64KB(a,s) (0) + +#define EXTRA_FLOPPY_PARAMS + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_FLOPPY_H */ diff --git a/arch/powerpc/include/asm/fs_pd.h b/arch/powerpc/include/asm/fs_pd.h new file mode 100644 index 000000000000..9361cd5342cc --- /dev/null +++ b/arch/powerpc/include/asm/fs_pd.h @@ -0,0 +1,50 @@ +/* + * Platform information definitions. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef FS_PD_H +#define FS_PD_H +#include +#include + +#ifdef CONFIG_CPM2 +#include + +#if defined(CONFIG_8260) +#include +#endif + +#define cpm2_map(member) (&cpm2_immr->member) +#define cpm2_map_size(member, size) (&cpm2_immr->member) +#define cpm2_unmap(addr) do {} while(0) +#endif + +#ifdef CONFIG_8xx +#include +#include + +extern immap_t __iomem *mpc8xx_immr; + +#define immr_map(member) (&mpc8xx_immr->member) +#define immr_map_size(member, size) (&mpc8xx_immr->member) +#define immr_unmap(addr) do {} while (0) +#endif + +static inline int uart_baudrate(void) +{ + return get_baudrate(); +} + +static inline int uart_clock(void) +{ + return ppc_proc_freq; +} + +#endif diff --git a/arch/powerpc/include/asm/fsl_gtm.h b/arch/powerpc/include/asm/fsl_gtm.h new file mode 100644 index 000000000000..8e8c9b5032d3 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_gtm.h @@ -0,0 +1,47 @@ +/* + * Freescale General-purpose Timers Module + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_FSL_GTM_H +#define __ASM_FSL_GTM_H + +#include + +struct gtm; + +struct gtm_timer { + unsigned int irq; + + struct gtm *gtm; + bool requested; + u8 __iomem *gtcfr; + __be16 __iomem *gtmdr; + __be16 __iomem *gtpsr; + __be16 __iomem *gtcnr; + __be16 __iomem *gtrfr; + __be16 __iomem *gtevr; +}; + +extern struct gtm_timer *gtm_get_timer16(void); +extern struct gtm_timer *gtm_get_specific_timer16(struct gtm *gtm, + unsigned int timer); +extern void gtm_put_timer16(struct gtm_timer *tmr); +extern int gtm_set_timer16(struct gtm_timer *tmr, unsigned long usec, + bool reload); +extern int gtm_set_exact_timer16(struct gtm_timer *tmr, u16 usec, + bool reload); +extern void gtm_stop_timer16(struct gtm_timer *tmr); +extern void gtm_ack_timer16(struct gtm_timer *tmr, u16 events); + +#endif /* __ASM_FSL_GTM_H */ diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h new file mode 100644 index 000000000000..303f5484c050 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -0,0 +1,311 @@ +/* Freescale Local Bus Controller + * + * Copyright (c) 2006-2007 Freescale Semiconductor + * + * Authors: Nick Spence , + * Scott Wood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_FSL_LBC_H +#define __ASM_FSL_LBC_H + +#include +#include +#include + +struct fsl_lbc_bank { + __be32 br; /**< Base Register */ +#define BR_BA 0xFFFF8000 +#define BR_BA_SHIFT 15 +#define BR_PS 0x00001800 +#define BR_PS_SHIFT 11 +#define BR_PS_8 0x00000800 /* Port Size 8 bit */ +#define BR_PS_16 0x00001000 /* Port Size 16 bit */ +#define BR_PS_32 0x00001800 /* Port Size 32 bit */ +#define BR_DECC 0x00000600 +#define BR_DECC_SHIFT 9 +#define BR_DECC_OFF 0x00000000 /* HW ECC checking and generation off */ +#define BR_DECC_CHK 0x00000200 /* HW ECC checking on, generation off */ +#define BR_DECC_CHK_GEN 0x00000400 /* HW ECC checking and generation on */ +#define BR_WP 0x00000100 +#define BR_WP_SHIFT 8 +#define BR_MSEL 0x000000E0 +#define BR_MSEL_SHIFT 5 +#define BR_MS_GPCM 0x00000000 /* GPCM */ +#define BR_MS_FCM 0x00000020 /* FCM */ +#define BR_MS_SDRAM 0x00000060 /* SDRAM */ +#define BR_MS_UPMA 0x00000080 /* UPMA */ +#define BR_MS_UPMB 0x000000A0 /* UPMB */ +#define BR_MS_UPMC 0x000000C0 /* UPMC */ +#define BR_V 0x00000001 +#define BR_V_SHIFT 0 +#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V) + + __be32 or; /**< Base Register */ +#define OR0 0x5004 +#define OR1 0x500C +#define OR2 0x5014 +#define OR3 0x501C +#define OR4 0x5024 +#define OR5 0x502C +#define OR6 0x5034 +#define OR7 0x503C + +#define OR_FCM_AM 0xFFFF8000 +#define OR_FCM_AM_SHIFT 15 +#define OR_FCM_BCTLD 0x00001000 +#define OR_FCM_BCTLD_SHIFT 12 +#define OR_FCM_PGS 0x00000400 +#define OR_FCM_PGS_SHIFT 10 +#define OR_FCM_CSCT 0x00000200 +#define OR_FCM_CSCT_SHIFT 9 +#define OR_FCM_CST 0x00000100 +#define OR_FCM_CST_SHIFT 8 +#define OR_FCM_CHT 0x00000080 +#define OR_FCM_CHT_SHIFT 7 +#define OR_FCM_SCY 0x00000070 +#define OR_FCM_SCY_SHIFT 4 +#define OR_FCM_SCY_1 0x00000010 +#define OR_FCM_SCY_2 0x00000020 +#define OR_FCM_SCY_3 0x00000030 +#define OR_FCM_SCY_4 0x00000040 +#define OR_FCM_SCY_5 0x00000050 +#define OR_FCM_SCY_6 0x00000060 +#define OR_FCM_SCY_7 0x00000070 +#define OR_FCM_RST 0x00000008 +#define OR_FCM_RST_SHIFT 3 +#define OR_FCM_TRLX 0x00000004 +#define OR_FCM_TRLX_SHIFT 2 +#define OR_FCM_EHTR 0x00000002 +#define OR_FCM_EHTR_SHIFT 1 +}; + +struct fsl_lbc_regs { + struct fsl_lbc_bank bank[8]; + u8 res0[0x28]; + __be32 mar; /**< UPM Address Register */ + u8 res1[0x4]; + __be32 mamr; /**< UPMA Mode Register */ +#define MxMR_OP_NO (0 << 28) /**< normal operation */ +#define MxMR_OP_WA (1 << 28) /**< write array */ +#define MxMR_OP_RA (2 << 28) /**< read array */ +#define MxMR_OP_RP (3 << 28) /**< run pattern */ +#define MxMR_MAD 0x3f /**< machine address */ + __be32 mbmr; /**< UPMB Mode Register */ + __be32 mcmr; /**< UPMC Mode Register */ + u8 res2[0x8]; + __be32 mrtpr; /**< Memory Refresh Timer Prescaler Register */ + __be32 mdr; /**< UPM Data Register */ + u8 res3[0x4]; + __be32 lsor; /**< Special Operation Initiation Register */ + __be32 lsdmr; /**< SDRAM Mode Register */ + u8 res4[0x8]; + __be32 lurt; /**< UPM Refresh Timer */ + __be32 lsrt; /**< SDRAM Refresh Timer */ + u8 res5[0x8]; + __be32 ltesr; /**< Transfer Error Status Register */ +#define LTESR_BM 0x80000000 +#define LTESR_FCT 0x40000000 +#define LTESR_PAR 0x20000000 +#define LTESR_WP 0x04000000 +#define LTESR_ATMW 0x00800000 +#define LTESR_ATMR 0x00400000 +#define LTESR_CS 0x00080000 +#define LTESR_CC 0x00000001 +#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC) + __be32 ltedr; /**< Transfer Error Disable Register */ + __be32 lteir; /**< Transfer Error Interrupt Register */ + __be32 lteatr; /**< Transfer Error Attributes Register */ + __be32 ltear; /**< Transfer Error Address Register */ + u8 res6[0xC]; + __be32 lbcr; /**< Configuration Register */ +#define LBCR_LDIS 0x80000000 +#define LBCR_LDIS_SHIFT 31 +#define LBCR_BCTLC 0x00C00000 +#define LBCR_BCTLC_SHIFT 22 +#define LBCR_AHD 0x00200000 +#define LBCR_LPBSE 0x00020000 +#define LBCR_LPBSE_SHIFT 17 +#define LBCR_EPAR 0x00010000 +#define LBCR_EPAR_SHIFT 16 +#define LBCR_BMT 0x0000FF00 +#define LBCR_BMT_SHIFT 8 +#define LBCR_INIT 0x00040000 + __be32 lcrr; /**< Clock Ratio Register */ +#define LCRR_DBYP 0x80000000 +#define LCRR_DBYP_SHIFT 31 +#define LCRR_BUFCMDC 0x30000000 +#define LCRR_BUFCMDC_SHIFT 28 +#define LCRR_ECL 0x03000000 +#define LCRR_ECL_SHIFT 24 +#define LCRR_EADC 0x00030000 +#define LCRR_EADC_SHIFT 16 +#define LCRR_CLKDIV 0x0000000F +#define LCRR_CLKDIV_SHIFT 0 + u8 res7[0x8]; + __be32 fmr; /**< Flash Mode Register */ +#define FMR_CWTO 0x0000F000 +#define FMR_CWTO_SHIFT 12 +#define FMR_BOOT 0x00000800 +#define FMR_ECCM 0x00000100 +#define FMR_AL 0x00000030 +#define FMR_AL_SHIFT 4 +#define FMR_OP 0x00000003 +#define FMR_OP_SHIFT 0 + __be32 fir; /**< Flash Instruction Register */ +#define FIR_OP0 0xF0000000 +#define FIR_OP0_SHIFT 28 +#define FIR_OP1 0x0F000000 +#define FIR_OP1_SHIFT 24 +#define FIR_OP2 0x00F00000 +#define FIR_OP2_SHIFT 20 +#define FIR_OP3 0x000F0000 +#define FIR_OP3_SHIFT 16 +#define FIR_OP4 0x0000F000 +#define FIR_OP4_SHIFT 12 +#define FIR_OP5 0x00000F00 +#define FIR_OP5_SHIFT 8 +#define FIR_OP6 0x000000F0 +#define FIR_OP6_SHIFT 4 +#define FIR_OP7 0x0000000F +#define FIR_OP7_SHIFT 0 +#define FIR_OP_NOP 0x0 /* No operation and end of sequence */ +#define FIR_OP_CA 0x1 /* Issue current column address */ +#define FIR_OP_PA 0x2 /* Issue current block+page address */ +#define FIR_OP_UA 0x3 /* Issue user defined address */ +#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */ +#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */ +#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */ +#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */ +#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */ +#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */ +#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */ +#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */ +#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */ +#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */ +#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */ +#define FIR_OP_RSW 0xE /* Wait then read 1 or 2 bytes */ + __be32 fcr; /**< Flash Command Register */ +#define FCR_CMD0 0xFF000000 +#define FCR_CMD0_SHIFT 24 +#define FCR_CMD1 0x00FF0000 +#define FCR_CMD1_SHIFT 16 +#define FCR_CMD2 0x0000FF00 +#define FCR_CMD2_SHIFT 8 +#define FCR_CMD3 0x000000FF +#define FCR_CMD3_SHIFT 0 + __be32 fbar; /**< Flash Block Address Register */ +#define FBAR_BLK 0x00FFFFFF + __be32 fpar; /**< Flash Page Address Register */ +#define FPAR_SP_PI 0x00007C00 +#define FPAR_SP_PI_SHIFT 10 +#define FPAR_SP_MS 0x00000200 +#define FPAR_SP_CI 0x000001FF +#define FPAR_SP_CI_SHIFT 0 +#define FPAR_LP_PI 0x0003F000 +#define FPAR_LP_PI_SHIFT 12 +#define FPAR_LP_MS 0x00000800 +#define FPAR_LP_CI 0x000007FF +#define FPAR_LP_CI_SHIFT 0 + __be32 fbcr; /**< Flash Byte Count Register */ +#define FBCR_BC 0x00000FFF + u8 res11[0x8]; + u8 res8[0xF00]; +}; + +extern struct fsl_lbc_regs __iomem *fsl_lbc_regs; +extern spinlock_t fsl_lbc_lock; + +/* + * FSL UPM routines + */ +struct fsl_upm { + __be32 __iomem *mxmr; + int width; +}; + +extern int fsl_lbc_find(phys_addr_t addr_base); +extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm); + +/** + * fsl_upm_start_pattern - start UPM patterns execution + * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find + * @pat_offset: UPM pattern offset for the command to be executed + * + * This routine programmes UPM so the next memory access that hits an UPM + * will trigger pattern execution, starting at pat_offset. + */ +static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset) +{ + clrsetbits_be32(upm->mxmr, MxMR_MAD, MxMR_OP_RP | pat_offset); +} + +/** + * fsl_upm_end_pattern - end UPM patterns execution + * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find + * + * This routine reverts UPM to normal operation mode. + */ +static inline void fsl_upm_end_pattern(struct fsl_upm *upm) +{ + clrbits32(upm->mxmr, MxMR_OP_RP); + + while (in_be32(upm->mxmr) & MxMR_OP_RP) + cpu_relax(); +} + +/** + * fsl_upm_run_pattern - actually run an UPM pattern + * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find + * @io_base: remapped pointer to where memory access should happen + * @mar: MAR register content during pattern execution + * + * This function triggers dummy write to the memory specified by the io_base, + * thus UPM pattern actually executed. Note that mar usage depends on the + * pre-programmed AMX bits in the UPM RAM. + */ +static inline int fsl_upm_run_pattern(struct fsl_upm *upm, + void __iomem *io_base, u32 mar) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&fsl_lbc_lock, flags); + + out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width)); + + switch (upm->width) { + case 8: + out_8(io_base, 0x0); + break; + case 16: + out_be16(io_base, 0x0); + break; + case 32: + out_be32(io_base, 0x0); + break; + default: + ret = -EINVAL; + break; + } + + spin_unlock_irqrestore(&fsl_lbc_lock, flags); + + return ret; +} + +#endif /* __ASM_FSL_LBC_H */ diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h new file mode 100644 index 000000000000..de921326cca8 --- /dev/null +++ b/arch/powerpc/include/asm/ftrace.h @@ -0,0 +1,14 @@ +#ifndef _ASM_POWERPC_FTRACE +#define _ASM_POWERPC_FTRACE + +#ifdef CONFIG_FTRACE +#define MCOUNT_ADDR ((long)(_mcount)) +#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ + +#ifndef __ASSEMBLY__ +extern void _mcount(void); +#endif + +#endif + +#endif /* _ASM_POWERPC_FTRACE */ diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h new file mode 100644 index 000000000000..6d406c5c5de4 --- /dev/null +++ b/arch/powerpc/include/asm/futex.h @@ -0,0 +1,117 @@ +#ifndef _ASM_POWERPC_FUTEX_H +#define _ASM_POWERPC_FUTEX_H + +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ + __asm__ __volatile ( \ + LWSYNC_ON_SMP \ +"1: lwarx %0,0,%2\n" \ + insn \ + PPC405_ERR77(0, %2) \ +"2: stwcx. %1,0,%2\n" \ + "bne- 1b\n" \ + "li %1,0\n" \ +"3: .section .fixup,\"ax\"\n" \ +"4: li %1,%3\n" \ + "b 3b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + ".align 3\n" \ + PPC_LONG "1b,4b,2b,4b\n" \ + ".previous" \ + : "=&r" (oldval), "=&r" (ret) \ + : "b" (uaddr), "i" (-EFAULT), "1" (oparg) \ + : "cr0", "memory") + +static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + __futex_atomic_op("", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ADD: + __futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_XOR: + __futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + int prev; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + __asm__ __volatile__ ( + LWSYNC_ON_SMP +"1: lwarx %0,0,%2 # futex_atomic_cmpxchg_inatomic\n\ + cmpw 0,%0,%3\n\ + bne- 3f\n" + PPC405_ERR77(0,%2) +"2: stwcx. %4,0,%2\n\ + bne- 1b\n" + ISYNC_ON_SMP +"3: .section .fixup,\"ax\"\n\ +4: li %0,%5\n\ + b 3b\n\ + .previous\n\ + .section __ex_table,\"a\"\n\ + .align 3\n\ + " PPC_LONG "1b,4b,2b,4b\n\ + .previous" \ + : "=&r" (prev), "+m" (*uaddr) + : "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT) + : "cc", "memory"); + + return prev; +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_FUTEX_H */ diff --git a/arch/powerpc/include/asm/gpio.h b/arch/powerpc/include/asm/gpio.h new file mode 100644 index 000000000000..ea04632399d8 --- /dev/null +++ b/arch/powerpc/include/asm/gpio.h @@ -0,0 +1,56 @@ +/* + * Generic GPIO API implementation for PowerPC. + * + * Copyright (c) 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __ASM_POWERPC_GPIO_H +#define __ASM_POWERPC_GPIO_H + +#include +#include + +#ifdef CONFIG_GPIOLIB + +/* + * We don't (yet) implement inlined/rapid versions for on-chip gpios. + * Just call gpiolib. + */ +static inline int gpio_get_value(unsigned int gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return __gpio_cansleep(gpio); +} + +/* + * Not implemented, yet. + */ +static inline int gpio_to_irq(unsigned int gpio) +{ + return -ENOSYS; +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return -EINVAL; +} + +#endif /* CONFIG_GPIOLIB */ + +#endif /* __ASM_POWERPC_GPIO_H */ diff --git a/arch/powerpc/include/asm/grackle.h b/arch/powerpc/include/asm/grackle.h new file mode 100644 index 000000000000..bd7812a519d4 --- /dev/null +++ b/arch/powerpc/include/asm/grackle.h @@ -0,0 +1,12 @@ +#ifndef _ASM_POWERPC_GRACKLE_H +#define _ASM_POWERPC_GRACKLE_H +#ifdef __KERNEL__ +/* + * Functions for setting up and using a MPC106 northbridge + */ + +#include + +extern void setup_grackle(struct pci_controller *hose); +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_GRACKLE_H */ diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h new file mode 100644 index 000000000000..288e14d53b7f --- /dev/null +++ b/arch/powerpc/include/asm/hardirq.h @@ -0,0 +1,29 @@ +#ifndef _ASM_POWERPC_HARDIRQ_H +#define _ASM_POWERPC_HARDIRQ_H +#ifdef __KERNEL__ + +#include +#include + +/* The __last_jiffy_stamp field is needed to ensure that no decrementer + * interrupt is lost on SMP machines. Since on most CPUs it is in the same + * cache line as local_irq_count, it is cheap to access and is also used on UP + * for uniformity. + */ +typedef struct { + unsigned int __softirq_pending; /* set_bit is used on this */ + unsigned int __last_jiffy_stamp; +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp) + +static inline void ack_bad_irq(int irq) +{ + printk(KERN_CRIT "illegal vector %d received!\n", irq); + BUG(); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_HARDIRQ_H */ diff --git a/arch/powerpc/include/asm/heathrow.h b/arch/powerpc/include/asm/heathrow.h new file mode 100644 index 000000000000..93f54958a9d1 --- /dev/null +++ b/arch/powerpc/include/asm/heathrow.h @@ -0,0 +1,67 @@ +#ifndef _ASM_POWERPC_HEATHROW_H +#define _ASM_POWERPC_HEATHROW_H +#ifdef __KERNEL__ +/* + * heathrow.h: definitions for using the "Heathrow" I/O controller chip. + * + * Grabbed from Open Firmware definitions on a PowerBook G3 Series + * + * Copyright (C) 1997 Paul Mackerras. + */ + +/* Front light color on Yikes/B&W G3. 32 bits */ +#define HEATHROW_FRONT_LIGHT 0x32 /* (set to 0 or 0xffffffff) */ + +/* Brightness/contrast (gossamer iMac ?). 8 bits */ +#define HEATHROW_BRIGHTNESS_CNTL 0x32 +#define HEATHROW_CONTRAST_CNTL 0x33 + +/* offset from ohare base for feature control register */ +#define HEATHROW_MBCR 0x34 /* Media bay control */ +#define HEATHROW_FCR 0x38 /* Feature control */ +#define HEATHROW_AUX_CNTL_REG 0x3c /* Aux control */ + +/* + * Bits in feature control register. + * Bits postfixed with a _N are in inverse logic + */ +#define HRW_SCC_TRANS_EN_N 0x00000001 /* Also controls modem power */ +#define HRW_BAY_POWER_N 0x00000002 +#define HRW_BAY_PCI_ENABLE 0x00000004 +#define HRW_BAY_IDE_ENABLE 0x00000008 +#define HRW_BAY_FLOPPY_ENABLE 0x00000010 +#define HRW_IDE0_ENABLE 0x00000020 +#define HRW_IDE0_RESET_N 0x00000040 +#define HRW_BAY_DEV_MASK 0x0000001c +#define HRW_BAY_RESET_N 0x00000080 +#define HRW_IOBUS_ENABLE 0x00000100 /* Internal IDE ? */ +#define HRW_SCC_ENABLE 0x00000200 +#define HRW_MESH_ENABLE 0x00000400 +#define HRW_SWIM_ENABLE 0x00000800 +#define HRW_SOUND_POWER_N 0x00001000 +#define HRW_SOUND_CLK_ENABLE 0x00002000 +#define HRW_SCCA_IO 0x00004000 +#define HRW_SCCB_IO 0x00008000 +#define HRW_PORT_OR_DESK_VIA_N 0x00010000 /* This one is 0 on PowerBook */ +#define HRW_PWM_MON_ID_N 0x00020000 /* ??? (0) */ +#define HRW_HOOK_MB_CNT_N 0x00040000 /* ??? (0) */ +#define HRW_SWIM_CLONE_FLOPPY 0x00080000 /* ??? (0) */ +#define HRW_AUD_RUN22 0x00100000 /* ??? (1) */ +#define HRW_SCSI_LINK_MODE 0x00200000 /* Read ??? (1) */ +#define HRW_ARB_BYPASS 0x00400000 /* Disable internal PCI arbitrer */ +#define HRW_IDE1_RESET_N 0x00800000 /* Media bay */ +#define HRW_SLOW_SCC_PCLK 0x01000000 /* ??? (0) */ +#define HRW_RESET_SCC 0x02000000 +#define HRW_MFDC_CELL_ENABLE 0x04000000 /* ??? (0) */ +#define HRW_USE_MFDC 0x08000000 /* ??? (0) */ +#define HRW_BMAC_IO_ENABLE 0x60000000 /* two bits, not documented in OF */ +#define HRW_BMAC_RESET 0x80000000 /* not documented in OF */ + +/* We OR those features at boot on desktop G3s */ +#define HRW_DEFAULTS (HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE) + +/* Looks like Heathrow has some sort of GPIOs as well... */ +#define HRW_GPIO_MODEM_RESET 0x6d + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_HEATHROW_H */ diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h new file mode 100644 index 000000000000..5d99b6489d56 --- /dev/null +++ b/arch/powerpc/include/asm/highmem.h @@ -0,0 +1,138 @@ +/* + * highmem.h: virtual kernel memory mappings for high memory + * + * PowerPC version, stolen from the i386 version. + * + * Used in CONFIG_HIGHMEM systems for memory pages which + * are not addressable by direct kernel virtual addresses. + * + * Copyright (C) 1999 Gerhard Wichert, Siemens AG + * Gerhard.Wichert@pdb.siemens.de + * + * + * Redesigned the x86 32-bit VM architecture to deal with + * up to 16 Terrabyte physical memory. With current x86 CPUs + * we now support up to 64 Gigabytes physical RAM. + * + * Copyright (C) 1999 Ingo Molnar + */ + +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include +#include + +extern pte_t *kmap_pte; +extern pgprot_t kmap_prot; +extern pte_t *pkmap_page_table; + +/* + * Right now we initialize only a single pte table. It can be extended + * easily, subsequent pte tables have to be allocated in one physical + * chunk of RAM. + */ +#define LAST_PKMAP (1 << PTE_SHIFT) +#define LAST_PKMAP_MASK (LAST_PKMAP-1) +#define PKMAP_BASE ((FIXADDR_START - PAGE_SIZE*(LAST_PKMAP + 1)) & PMD_MASK) +#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +extern void *kmap_high(struct page *page); +extern void kunmap_high(struct page *page); + +static inline void *kmap(struct page *page) +{ + might_sleep(); + if (!PageHighMem(page)) + return page_address(page); + return kmap_high(page); +} + +static inline void kunmap(struct page *page) +{ + BUG_ON(in_interrupt()); + if (!PageHighMem(page)) + return; + kunmap_high(page); +} + +/* + * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap + * gives a more generic (and caching) interface. But kmap_atomic can + * be used in IRQ contexts, so in some (very limited) cases we need + * it. + */ +static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot) +{ + unsigned int idx; + unsigned long vaddr; + + /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ + pagefault_disable(); + if (!PageHighMem(page)) + return page_address(page); + + idx = type + KM_TYPE_NR*smp_processor_id(); + vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); +#ifdef CONFIG_DEBUG_HIGHMEM + BUG_ON(!pte_none(*(kmap_pte-idx))); +#endif + set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot)); + flush_tlb_page(NULL, vaddr); + + return (void*) vaddr; +} + +static inline void *kmap_atomic(struct page *page, enum km_type type) +{ + return kmap_atomic_prot(page, type, kmap_prot); +} + +static inline void kunmap_atomic(void *kvaddr, enum km_type type) +{ +#ifdef CONFIG_DEBUG_HIGHMEM + unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; + enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id(); + + if (vaddr < __fix_to_virt(FIX_KMAP_END)) { + pagefault_enable(); + return; + } + + BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); + + /* + * force other mappings to Oops if they'll try to access + * this pte without first remap it + */ + pte_clear(&init_mm, vaddr, kmap_pte-idx); + flush_tlb_page(NULL, vaddr); +#endif + pagefault_enable(); +} + +static inline struct page *kmap_atomic_to_page(void *ptr) +{ + unsigned long idx, vaddr = (unsigned long) ptr; + pte_t *pte; + + if (vaddr < FIXADDR_START) + return virt_to_page(ptr); + + idx = virt_to_fix(vaddr); + pte = kmap_pte - (idx - FIX_KMAP_BEGIN); + return pte_page(*pte); +} + +#define flush_cache_kmaps() flush_cache_all() + +#endif /* __KERNEL__ */ + +#endif /* _ASM_HIGHMEM_H */ diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h new file mode 100644 index 000000000000..26f0d0ab27a5 --- /dev/null +++ b/arch/powerpc/include/asm/hugetlb.h @@ -0,0 +1,75 @@ +#ifndef _ASM_POWERPC_HUGETLB_H +#define _ASM_POWERPC_HUGETLB_H + +#include + + +int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr, + unsigned long len); + +void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, + unsigned long end, unsigned long floor, + unsigned long ceiling); + +void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte); + +pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, + pte_t *ptep); + +/* + * If the arch doesn't supply something else, assume that hugepage + * size aligned regions are ok without further preparation. + */ +static inline int prepare_hugepage_range(struct file *file, + unsigned long addr, unsigned long len) +{ + struct hstate *h = hstate_file(file); + if (len & ~huge_page_mask(h)) + return -EINVAL; + if (addr & ~huge_page_mask(h)) + return -EINVAL; + return 0; +} + +static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) +{ +} + +static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ +} + +static inline int huge_pte_none(pte_t pte) +{ + return pte_none(pte); +} + +static inline pte_t huge_pte_wrprotect(pte_t pte) +{ + return pte_wrprotect(pte); +} + +static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, + pte_t pte, int dirty) +{ + return ptep_set_access_flags(vma, addr, ptep, pte, dirty); +} + +static inline pte_t huge_ptep_get(pte_t *ptep) +{ + return *ptep; +} + +static inline int arch_prepare_hugepage(struct page *page) +{ + return 0; +} + +static inline void arch_release_hugepage(struct page *page) +{ +} + +#endif /* _ASM_POWERPC_HUGETLB_H */ diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h new file mode 100644 index 000000000000..fbe2932fa9e9 --- /dev/null +++ b/arch/powerpc/include/asm/hvcall.h @@ -0,0 +1,296 @@ +#ifndef _ASM_POWERPC_HVCALL_H +#define _ASM_POWERPC_HVCALL_H +#ifdef __KERNEL__ + +#define HVSC .long 0x44000022 + +#define H_SUCCESS 0 +#define H_BUSY 1 /* Hardware busy -- retry later */ +#define H_CLOSED 2 /* Resource closed */ +#define H_NOT_AVAILABLE 3 +#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */ +#define H_PARTIAL 5 +#define H_IN_PROGRESS 14 /* Kind of like busy */ +#define H_PAGE_REGISTERED 15 +#define H_PARTIAL_STORE 16 +#define H_PENDING 17 /* returned from H_POLL_PENDING */ +#define H_CONTINUE 18 /* Returned from H_Join on success */ +#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */ +#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \ + is a good time to retry */ +#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */ +#define H_HARDWARE -1 /* Hardware error */ +#define H_FUNCTION -2 /* Function not supported */ +#define H_PRIVILEGE -3 /* Caller not privileged */ +#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */ +#define H_BAD_MODE -5 /* Illegal msr value */ +#define H_PTEG_FULL -6 /* PTEG is full */ +#define H_NOT_FOUND -7 /* PTE was not found" */ +#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ +#define H_NO_MEM -9 +#define H_AUTHORITY -10 +#define H_PERMISSION -11 +#define H_DROPPED -12 +#define H_SOURCE_PARM -13 +#define H_DEST_PARM -14 +#define H_REMOTE_PARM -15 +#define H_RESOURCE -16 +#define H_ADAPTER_PARM -17 +#define H_RH_PARM -18 +#define H_RCQ_PARM -19 +#define H_SCQ_PARM -20 +#define H_EQ_PARM -21 +#define H_RT_PARM -22 +#define H_ST_PARM -23 +#define H_SIGT_PARM -24 +#define H_TOKEN_PARM -25 +#define H_MLENGTH_PARM -27 +#define H_MEM_PARM -28 +#define H_MEM_ACCESS_PARM -29 +#define H_ATTR_PARM -30 +#define H_PORT_PARM -31 +#define H_MCG_PARM -32 +#define H_VL_PARM -33 +#define H_TSIZE_PARM -34 +#define H_TRACE_PARM -35 + +#define H_MASK_PARM -37 +#define H_MCG_FULL -38 +#define H_ALIAS_EXIST -39 +#define H_P_COUNTER -40 +#define H_TABLE_FULL -41 +#define H_ALT_TABLE -42 +#define H_MR_CONDITION -43 +#define H_NOT_ENOUGH_RESOURCES -44 +#define H_R_STATE -45 +#define H_RESCINDEND -46 + + +/* Long Busy is a condition that can be returned by the firmware + * when a call cannot be completed now, but the identical call + * should be retried later. This prevents calls blocking in the + * firmware for long periods of time. Annoyingly the firmware can return + * a range of return codes, hinting at how long we should wait before + * retrying. If you don't care for the hint, the macro below is a good + * way to check for the long_busy return codes + */ +#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \ + && (x <= H_LONG_BUSY_END_RANGE)) + +/* Flags */ +#define H_LARGE_PAGE (1UL<<(63-16)) +#define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */ +#define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */ +#define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */ +#define H_PAGE_STATE_CHANGE (1UL<<(63-28)) +#define H_PAGE_UNUSED ((1UL<<(63-29)) | (1UL<<(63-30))) +#define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED) +#define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1UL<<(63-31))) +#define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE +#define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */ +#define H_ANDCOND (1UL<<(63-33)) +#define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */ +#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */ +#define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */ +#define H_COPY_PAGE (1UL<<(63-49)) +#define H_N (1UL<<(63-61)) +#define H_PP1 (1UL<<(63-62)) +#define H_PP2 (1UL<<(63-63)) + +/* VASI States */ +#define H_VASI_INVALID 0 +#define H_VASI_ENABLED 1 +#define H_VASI_ABORTED 2 +#define H_VASI_SUSPENDING 3 +#define H_VASI_SUSPENDED 4 +#define H_VASI_RESUMED 5 +#define H_VASI_COMPLETED 6 + +/* DABRX flags */ +#define H_DABRX_HYPERVISOR (1UL<<(63-61)) +#define H_DABRX_KERNEL (1UL<<(63-62)) +#define H_DABRX_USER (1UL<<(63-63)) + +/* Each control block has to be on a 4K bondary */ +#define H_CB_ALIGNMENT 4096 + +/* pSeries hypervisor opcodes */ +#define H_REMOVE 0x04 +#define H_ENTER 0x08 +#define H_READ 0x0c +#define H_CLEAR_MOD 0x10 +#define H_CLEAR_REF 0x14 +#define H_PROTECT 0x18 +#define H_GET_TCE 0x1c +#define H_PUT_TCE 0x20 +#define H_SET_SPRG0 0x24 +#define H_SET_DABR 0x28 +#define H_PAGE_INIT 0x2c +#define H_SET_ASR 0x30 +#define H_ASR_ON 0x34 +#define H_ASR_OFF 0x38 +#define H_LOGICAL_CI_LOAD 0x3c +#define H_LOGICAL_CI_STORE 0x40 +#define H_LOGICAL_CACHE_LOAD 0x44 +#define H_LOGICAL_CACHE_STORE 0x48 +#define H_LOGICAL_ICBI 0x4c +#define H_LOGICAL_DCBF 0x50 +#define H_GET_TERM_CHAR 0x54 +#define H_PUT_TERM_CHAR 0x58 +#define H_REAL_TO_LOGICAL 0x5c +#define H_HYPERVISOR_DATA 0x60 +#define H_EOI 0x64 +#define H_CPPR 0x68 +#define H_IPI 0x6c +#define H_IPOLL 0x70 +#define H_XIRR 0x74 +#define H_PERFMON 0x7c +#define H_MIGRATE_DMA 0x78 +#define H_REGISTER_VPA 0xDC +#define H_CEDE 0xE0 +#define H_CONFER 0xE4 +#define H_PROD 0xE8 +#define H_GET_PPP 0xEC +#define H_SET_PPP 0xF0 +#define H_PURR 0xF4 +#define H_PIC 0xF8 +#define H_REG_CRQ 0xFC +#define H_FREE_CRQ 0x100 +#define H_VIO_SIGNAL 0x104 +#define H_SEND_CRQ 0x108 +#define H_COPY_RDMA 0x110 +#define H_REGISTER_LOGICAL_LAN 0x114 +#define H_FREE_LOGICAL_LAN 0x118 +#define H_ADD_LOGICAL_LAN_BUFFER 0x11C +#define H_SEND_LOGICAL_LAN 0x120 +#define H_BULK_REMOVE 0x124 +#define H_MULTICAST_CTRL 0x130 +#define H_SET_XDABR 0x134 +#define H_STUFF_TCE 0x138 +#define H_PUT_TCE_INDIRECT 0x13C +#define H_CHANGE_LOGICAL_LAN_MAC 0x14C +#define H_VTERM_PARTNER_INFO 0x150 +#define H_REGISTER_VTERM 0x154 +#define H_FREE_VTERM 0x158 +#define H_RESET_EVENTS 0x15C +#define H_ALLOC_RESOURCE 0x160 +#define H_FREE_RESOURCE 0x164 +#define H_MODIFY_QP 0x168 +#define H_QUERY_QP 0x16C +#define H_REREGISTER_PMR 0x170 +#define H_REGISTER_SMR 0x174 +#define H_QUERY_MR 0x178 +#define H_QUERY_MW 0x17C +#define H_QUERY_HCA 0x180 +#define H_QUERY_PORT 0x184 +#define H_MODIFY_PORT 0x188 +#define H_DEFINE_AQP1 0x18C +#define H_GET_TRACE_BUFFER 0x190 +#define H_DEFINE_AQP0 0x194 +#define H_RESIZE_MR 0x198 +#define H_ATTACH_MCQP 0x19C +#define H_DETACH_MCQP 0x1A0 +#define H_CREATE_RPT 0x1A4 +#define H_REMOVE_RPT 0x1A8 +#define H_REGISTER_RPAGES 0x1AC +#define H_DISABLE_AND_GETC 0x1B0 +#define H_ERROR_DATA 0x1B4 +#define H_GET_HCA_INFO 0x1B8 +#define H_GET_PERF_COUNT 0x1BC +#define H_MANAGE_TRACE 0x1C0 +#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4 +#define H_QUERY_INT_STATE 0x1E4 +#define H_POLL_PENDING 0x1D8 +#define H_ILLAN_ATTRIBUTES 0x244 +#define H_JOIN 0x298 +#define H_VASI_STATE 0x2A4 +#define H_ENABLE_CRQ 0x2B0 +#define H_SET_MPP 0x2D0 +#define H_GET_MPP 0x2D4 +#define MAX_HCALL_OPCODE H_GET_MPP + +#ifndef __ASSEMBLY__ + +/** + * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments + * @opcode: The hypervisor call to make. + * + * This call supports up to 7 arguments and only returns the status of + * the hcall. Use this version where possible, its slightly faster than + * the other plpar_hcalls. + */ +long plpar_hcall_norets(unsigned long opcode, ...); + +/** + * plpar_hcall: - Make a pseries hypervisor call + * @opcode: The hypervisor call to make. + * @retbuf: Buffer to store up to 4 return arguments in. + * + * This call supports up to 6 arguments and 4 return arguments. Use + * PLPAR_HCALL_BUFSIZE to size the return argument buffer. + * + * Used for all but the craziest of phyp interfaces (see plpar_hcall9) + */ +#define PLPAR_HCALL_BUFSIZE 4 +long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...); + +/** + * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats + * @opcode: The hypervisor call to make. + * @retbuf: Buffer to store up to 4 return arguments in. + * + * This call supports up to 6 arguments and 4 return arguments. Use + * PLPAR_HCALL_BUFSIZE to size the return argument buffer. + * + * Used when phyp interface needs to be called in real mode. Similar to + * plpar_hcall, but plpar_hcall_raw works in real mode and does not + * calculate hypervisor call statistics. + */ +long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...); + +/** + * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments + * @opcode: The hypervisor call to make. + * @retbuf: Buffer to store up to 9 return arguments in. + * + * This call supports up to 9 arguments and 9 return arguments. Use + * PLPAR_HCALL9_BUFSIZE to size the return argument buffer. + */ +#define PLPAR_HCALL9_BUFSIZE 9 +long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...); + +/* For hcall instrumentation. One structure per-hcall, per-CPU */ +struct hcall_stats { + unsigned long num_calls; /* number of calls (on this CPU) */ + unsigned long tb_total; /* total wall time (mftb) of calls. */ + unsigned long purr_total; /* total cpu time (PURR) of calls. */ +}; +#define HCALL_STAT_ARRAY_SIZE ((MAX_HCALL_OPCODE >> 2) + 1) + +struct hvcall_mpp_data { + unsigned long entitled_mem; + unsigned long mapped_mem; + unsigned short group_num; + unsigned short pool_num; + unsigned char mem_weight; + unsigned char unallocated_mem_weight; + unsigned long unallocated_entitlement; /* value in bytes */ + unsigned long pool_size; + signed long loan_request; + unsigned long backing_mem; +}; + +int h_get_mpp(struct hvcall_mpp_data *); +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_HVCALL_H */ diff --git a/arch/powerpc/include/asm/hvconsole.h b/arch/powerpc/include/asm/hvconsole.h new file mode 100644 index 000000000000..35ea69e8121f --- /dev/null +++ b/arch/powerpc/include/asm/hvconsole.h @@ -0,0 +1,41 @@ +/* + * hvconsole.h + * Copyright (C) 2004 Ryan S Arnold, IBM Corporation + * + * LPAR console support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _PPC64_HVCONSOLE_H +#define _PPC64_HVCONSOLE_H +#ifdef __KERNEL__ + +/* + * PSeries firmware will only send/recv up to 16 bytes of character data per + * hcall. + */ +#define MAX_VIO_PUT_CHARS 16 +#define SIZE_VIO_GET_CHARS 16 + +/* + * Vio firmware always attempts to fetch MAX_VIO_GET_CHARS chars. The 'count' + * parm is included to conform to put_chars() function pointer template + */ +extern int hvc_get_chars(uint32_t vtermno, char *buf, int count); +extern int hvc_put_chars(uint32_t vtermno, const char *buf, int count); + +#endif /* __KERNEL__ */ +#endif /* _PPC64_HVCONSOLE_H */ diff --git a/arch/powerpc/include/asm/hvcserver.h b/arch/powerpc/include/asm/hvcserver.h new file mode 100644 index 000000000000..67d7da3a4da4 --- /dev/null +++ b/arch/powerpc/include/asm/hvcserver.h @@ -0,0 +1,59 @@ +/* + * hvcserver.h + * Copyright (C) 2004 Ryan S Arnold, IBM Corporation + * + * PPC64 virtual I/O console server support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _PPC64_HVCSERVER_H +#define _PPC64_HVCSERVER_H +#ifdef __KERNEL__ + +#include + +/* Converged Location Code length */ +#define HVCS_CLC_LENGTH 79 + +/** + * hvcs_partner_info - an element in a list of partner info + * @node: list_head denoting this partner_info struct's position in the list of + * partner info. + * @unit_address: The partner unit address of this entry. + * @partition_ID: The partner partition ID of this entry. + * @location_code: The converged location code of this entry + 1 char for the + * null-term. + * + * This structure outlines the format that partner info is presented to a caller + * of the hvcs partner info fetching functions. These are strung together into + * a list using linux kernel lists. + */ +struct hvcs_partner_info { + struct list_head node; + uint32_t unit_address; + uint32_t partition_ID; + char location_code[HVCS_CLC_LENGTH + 1]; /* CLC + 1 null-term char */ +}; + +extern int hvcs_free_partner_info(struct list_head *head); +extern int hvcs_get_partner_info(uint32_t unit_address, + struct list_head *head, unsigned long *pi_buff); +extern int hvcs_register_connection(uint32_t unit_address, + uint32_t p_partition_ID, uint32_t p_unit_address); +extern int hvcs_free_connection(uint32_t unit_address); + +#endif /* __KERNEL__ */ +#endif /* _PPC64_HVCSERVER_H */ diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h new file mode 100644 index 000000000000..f75a5fc64d2e --- /dev/null +++ b/arch/powerpc/include/asm/hw_irq.h @@ -0,0 +1,135 @@ +/* + * Copyright (C) 1999 Cort Dougan + */ +#ifndef _ASM_POWERPC_HW_IRQ_H +#define _ASM_POWERPC_HW_IRQ_H + +#ifdef __KERNEL__ + +#include +#include +#include +#include + +extern void timer_interrupt(struct pt_regs *); + +#ifdef CONFIG_PPC64 +#include + +static inline unsigned long local_get_flags(void) +{ + unsigned long flags; + + __asm__ __volatile__("lbz %0,%1(13)" + : "=r" (flags) + : "i" (offsetof(struct paca_struct, soft_enabled))); + + return flags; +} + +static inline unsigned long raw_local_irq_disable(void) +{ + unsigned long flags, zero; + + __asm__ __volatile__("li %1,0; lbz %0,%2(13); stb %1,%2(13)" + : "=r" (flags), "=&r" (zero) + : "i" (offsetof(struct paca_struct, soft_enabled)) + : "memory"); + + return flags; +} + +extern void raw_local_irq_restore(unsigned long); +extern void iseries_handle_interrupts(void); + +#define raw_local_irq_enable() raw_local_irq_restore(1) +#define raw_local_save_flags(flags) ((flags) = local_get_flags()) +#define raw_local_irq_save(flags) ((flags) = raw_local_irq_disable()) + +#define raw_irqs_disabled() (local_get_flags() == 0) +#define raw_irqs_disabled_flags(flags) ((flags) == 0) + +#define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1) +#define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1) + +#define hard_irq_disable() \ + do { \ + __hard_irq_disable(); \ + get_paca()->soft_enabled = 0; \ + get_paca()->hard_enabled = 0; \ + } while(0) + +static inline int irqs_disabled_flags(unsigned long flags) +{ + return flags == 0; +} + +#else + +#if defined(CONFIG_BOOKE) +#define SET_MSR_EE(x) mtmsr(x) +#define local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory") +#else +#define SET_MSR_EE(x) mtmsr(x) +#define local_irq_restore(flags) mtmsr(flags) +#endif + +static inline void local_irq_disable(void) +{ +#ifdef CONFIG_BOOKE + __asm__ __volatile__("wrteei 0": : :"memory"); +#else + unsigned long msr; + __asm__ __volatile__("": : :"memory"); + msr = mfmsr(); + SET_MSR_EE(msr & ~MSR_EE); +#endif +} + +static inline void local_irq_enable(void) +{ +#ifdef CONFIG_BOOKE + __asm__ __volatile__("wrteei 1": : :"memory"); +#else + unsigned long msr; + __asm__ __volatile__("": : :"memory"); + msr = mfmsr(); + SET_MSR_EE(msr | MSR_EE); +#endif +} + +static inline void local_irq_save_ptr(unsigned long *flags) +{ + unsigned long msr; + msr = mfmsr(); + *flags = msr; +#ifdef CONFIG_BOOKE + __asm__ __volatile__("wrteei 0": : :"memory"); +#else + SET_MSR_EE(msr & ~MSR_EE); +#endif + __asm__ __volatile__("": : :"memory"); +} + +#define local_save_flags(flags) ((flags) = mfmsr()) +#define local_irq_save(flags) local_irq_save_ptr(&flags) +#define irqs_disabled() ((mfmsr() & MSR_EE) == 0) + +#define hard_irq_enable() local_irq_enable() +#define hard_irq_disable() local_irq_disable() + +static inline int irqs_disabled_flags(unsigned long flags) +{ + return (flags & MSR_EE) == 0; +} + +#endif /* CONFIG_PPC64 */ + +/* + * interrupt-retrigger: should we handle this via lost interrupts and IPIs + * or should we not care like we do now ? --BenH. + */ +struct hw_interrupt_type; + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_HW_IRQ_H */ diff --git a/arch/powerpc/include/asm/hydra.h b/arch/powerpc/include/asm/hydra.h new file mode 100644 index 000000000000..1ad4eed07fbe --- /dev/null +++ b/arch/powerpc/include/asm/hydra.h @@ -0,0 +1,102 @@ +/* + * include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions + * + * Copyright (C) 1997 Geert Uytterhoeven + * + * This file is based on the following documentation: + * + * Macintosh Technology in the Common Hardware Reference Platform + * Apple Computer, Inc. + * + * © Copyright 1995 Apple Computer, Inc. All rights reserved. + * + * It's available online from http://chrp.apple.com/MacTech.pdf. + * You can obtain paper copies of this book from computer bookstores or by + * writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San + * Francisco, CA 94104. Reference ISBN 1-55860-393-X. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _ASMPPC_HYDRA_H +#define _ASMPPC_HYDRA_H + +#ifdef __KERNEL__ + +struct Hydra { + /* DBDMA Controller Register Space */ + char Pad1[0x30]; + u_int CachePD; + u_int IDs; + u_int Feature_Control; + char Pad2[0x7fc4]; + /* DBDMA Channel Register Space */ + char SCSI_DMA[0x100]; + char Pad3[0x300]; + char SCCA_Tx_DMA[0x100]; + char SCCA_Rx_DMA[0x100]; + char SCCB_Tx_DMA[0x100]; + char SCCB_Rx_DMA[0x100]; + char Pad4[0x7800]; + /* Device Register Space */ + char SCSI[0x1000]; + char ADB[0x1000]; + char SCC_Legacy[0x1000]; + char SCC[0x1000]; + char Pad9[0x2000]; + char VIA[0x2000]; + char Pad10[0x28000]; + char OpenPIC[0x40000]; +}; + +extern volatile struct Hydra __iomem *Hydra; + + + /* + * Feature Control Register + */ + +#define HYDRA_FC_SCC_CELL_EN 0x00000001 /* Enable SCC Clock */ +#define HYDRA_FC_SCSI_CELL_EN 0x00000002 /* Enable SCSI Clock */ +#define HYDRA_FC_SCCA_ENABLE 0x00000004 /* Enable SCC A Lines */ +#define HYDRA_FC_SCCB_ENABLE 0x00000008 /* Enable SCC B Lines */ +#define HYDRA_FC_ARB_BYPASS 0x00000010 /* Bypass Internal Arbiter */ +#define HYDRA_FC_RESET_SCC 0x00000020 /* Reset SCC */ +#define HYDRA_FC_MPIC_ENABLE 0x00000040 /* Enable OpenPIC */ +#define HYDRA_FC_SLOW_SCC_PCLK 0x00000080 /* 1=15.6672, 0=25 MHz */ +#define HYDRA_FC_MPIC_IS_MASTER 0x00000100 /* OpenPIC Master Mode */ + + + /* + * OpenPIC Interrupt Sources + */ + +#define HYDRA_INT_SIO 0 +#define HYDRA_INT_SCSI_DMA 1 +#define HYDRA_INT_SCCA_TX_DMA 2 +#define HYDRA_INT_SCCA_RX_DMA 3 +#define HYDRA_INT_SCCB_TX_DMA 4 +#define HYDRA_INT_SCCB_RX_DMA 5 +#define HYDRA_INT_SCSI 6 +#define HYDRA_INT_SCCA 7 +#define HYDRA_INT_SCCB 8 +#define HYDRA_INT_VIA 9 +#define HYDRA_INT_ADB 10 +#define HYDRA_INT_ADB_NMI 11 +#define HYDRA_INT_EXT1 12 /* PCI IRQW */ +#define HYDRA_INT_EXT2 13 /* PCI IRQX */ +#define HYDRA_INT_EXT3 14 /* PCI IRQY */ +#define HYDRA_INT_EXT4 15 /* PCI IRQZ */ +#define HYDRA_INT_EXT5 16 /* IDE Primay/Secondary */ +#define HYDRA_INT_EXT6 17 /* IDE Secondary */ +#define HYDRA_INT_EXT7 18 /* Power Off Request */ +#define HYDRA_INT_SPARE 19 + +extern int hydra_init(void); +extern void macio_adb_init(void); + +#endif /* __KERNEL__ */ + +#endif /* _ASMPPC_HYDRA_H */ diff --git a/arch/powerpc/include/asm/i8259.h b/arch/powerpc/include/asm/i8259.h new file mode 100644 index 000000000000..db1362f8c603 --- /dev/null +++ b/arch/powerpc/include/asm/i8259.h @@ -0,0 +1,17 @@ +#ifndef _ASM_POWERPC_I8259_H +#define _ASM_POWERPC_I8259_H +#ifdef __KERNEL__ + +#include + +#ifdef CONFIG_PPC_MERGE +extern void i8259_init(struct device_node *node, unsigned long intack_addr); +extern unsigned int i8259_irq(void); +extern struct irq_host *i8259_get_host(void); +#else +extern void i8259_init(unsigned long intack_addr, int offset); +extern int i8259_irq(void); +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_I8259_H */ diff --git a/arch/powerpc/include/asm/ibmebus.h b/arch/powerpc/include/asm/ibmebus.h new file mode 100644 index 000000000000..1a9d9aea21fa --- /dev/null +++ b/arch/powerpc/include/asm/ibmebus.h @@ -0,0 +1,60 @@ +/* + * IBM PowerPC eBus Infrastructure Support. + * + * Copyright (c) 2005 IBM Corporation + * Joachim Fenkes + * Heiko J Schick + * + * All rights reserved. + * + * This source code is distributed under a dual license of GPL v2.0 and OpenIB + * BSD. + * + * OpenIB BSD License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_EBUS_H +#define _ASM_EBUS_H +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +extern struct bus_type ibmebus_bus_type; + +int ibmebus_register_driver(struct of_platform_driver *drv); +void ibmebus_unregister_driver(struct of_platform_driver *drv); + +int ibmebus_request_irq(u32 ist, irq_handler_t handler, + unsigned long irq_flags, const char *devname, + void *dev_id); +void ibmebus_free_irq(u32 ist, void *dev_id); + +#endif /* __KERNEL__ */ +#endif /* _ASM_IBMEBUS_H */ diff --git a/arch/powerpc/include/asm/ide.h b/arch/powerpc/include/asm/ide.h new file mode 100644 index 000000000000..1aaf27be8741 --- /dev/null +++ b/arch/powerpc/include/asm/ide.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 1994-1996 Linus Torvalds & authors + * + * This file contains the powerpc architecture specific IDE code. + */ +#ifndef _ASM_POWERPC_IDE_H +#define _ASM_POWERPC_IDE_H + +#ifdef __KERNEL__ + +#ifndef __powerpc64__ +#include +#include +#endif +#include + +#define __ide_mm_insw(p, a, c) readsw((void __iomem *)(p), (a), (c)) +#define __ide_mm_insl(p, a, c) readsl((void __iomem *)(p), (a), (c)) +#define __ide_mm_outsw(p, a, c) writesw((void __iomem *)(p), (a), (c)) +#define __ide_mm_outsl(p, a, c) writesl((void __iomem *)(p), (a), (c)) + +#ifndef __powerpc64__ +#include +#include + +/* FIXME: use ide_platform host driver */ +static __inline__ int ide_default_irq(unsigned long base) +{ +#ifdef CONFIG_PPLUS + switch (base) { + case 0x1f0: return 14; + case 0x170: return 15; + } +#endif + return 0; +} + +/* FIXME: use ide_platform host driver */ +static __inline__ unsigned long ide_default_io_base(int index) +{ +#ifdef CONFIG_PPLUS + switch (index) { + case 0: return 0x1f0; + case 1: return 0x170; + } +#endif + return 0; +} + +#ifdef CONFIG_BLK_DEV_MPC8xx_IDE +#define IDE_ARCH_ACK_INTR 1 +#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1) +#endif + +#endif /* __powerpc64__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_IDE_H */ diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h new file mode 100644 index 000000000000..0f165e59c326 --- /dev/null +++ b/arch/powerpc/include/asm/immap_86xx.h @@ -0,0 +1,156 @@ +/** + * MPC86xx Internal Memory Map + * + * Authors: Jeff Brown + * Timur Tabi + * + * Copyright 2004,2007 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This header file defines structures for various 86xx SOC devices that are + * used by multiple source files. + */ + +#ifndef __ASM_POWERPC_IMMAP_86XX_H__ +#define __ASM_POWERPC_IMMAP_86XX_H__ +#ifdef __KERNEL__ + +/* Global Utility Registers */ +struct ccsr_guts { + __be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */ + __be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */ + __be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */ + __be32 pordevsr; /* 0x.000c - POR I/O Device Status Register */ + __be32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */ + u8 res1[0x20 - 0x14]; + __be32 porcir; /* 0x.0020 - POR Configuration Information Register */ + u8 res2[0x30 - 0x24]; + __be32 gpiocr; /* 0x.0030 - GPIO Control Register */ + u8 res3[0x40 - 0x34]; + __be32 gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */ + u8 res4[0x50 - 0x44]; + __be32 gpindr; /* 0x.0050 - General-Purpose Input Data Register */ + u8 res5[0x60 - 0x54]; + __be32 pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */ + u8 res6[0x70 - 0x64]; + __be32 devdisr; /* 0x.0070 - Device Disable Control */ + __be32 devdisr2; /* 0x.0074 - Device Disable Control 2 */ + u8 res7[0x80 - 0x78]; + __be32 powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */ + u8 res8[0x90 - 0x84]; + __be32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */ + __be32 rstrscr; /* 0x.0094 - Reset Request Status and Control Register */ + u8 res9[0xA0 - 0x98]; + __be32 pvr; /* 0x.00a0 - Processor Version Register */ + __be32 svr; /* 0x.00a4 - System Version Register */ + u8 res10[0xB0 - 0xA8]; + __be32 rstcr; /* 0x.00b0 - Reset Control Register */ + u8 res11[0xC0 - 0xB4]; + __be32 elbcvselcr; /* 0x.00c0 - eLBC Voltage Select Ctrl Reg */ + u8 res12[0x800 - 0xC4]; + __be32 clkdvdr; /* 0x.0800 - Clock Divide Register */ + u8 res13[0x900 - 0x804]; + __be32 ircr; /* 0x.0900 - Infrared Control Register */ + u8 res14[0x908 - 0x904]; + __be32 dmacr; /* 0x.0908 - DMA Control Register */ + u8 res15[0x914 - 0x90C]; + __be32 elbccr; /* 0x.0914 - eLBC Control Register */ + u8 res16[0xB20 - 0x918]; + __be32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */ + __be32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */ + __be32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */ + u8 res17[0xE00 - 0xB2C]; + __be32 clkocr; /* 0x.0e00 - Clock Out Select Register */ + u8 res18[0xE10 - 0xE04]; + __be32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */ + u8 res19[0xE20 - 0xE14]; + __be32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */ + u8 res20[0xF04 - 0xE24]; + __be32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */ + __be32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */ + u8 res21[0xF40 - 0xF0C]; + __be32 srds2cr0; /* 0x.0f40 - SerDes1 Control Register 0 */ + __be32 srds2cr1; /* 0x.0f44 - SerDes1 Control Register 0 */ +} __attribute__ ((packed)); + +#define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */ +#define CCSR_GUTS_DMACR_DEV_IR 1 /* DMA controller/channel set to IR */ + +/* + * Set the DMACR register in the GUTS + * + * The DMACR register determines the source of initiated transfers for each + * channel on each DMA controller. Rather than have a bunch of repetitive + * macros for the bit patterns, we just have a function that calculates + * them. + * + * guts: Pointer to GUTS structure + * co: The DMA controller (0 or 1) + * ch: The channel on the DMA controller (0, 1, 2, or 3) + * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx) + */ +static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts, + unsigned int co, unsigned int ch, unsigned int device) +{ + unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch)); + + clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); +} + +#define CCSR_GUTS_PMUXCR_LDPSEL 0x00010000 +#define CCSR_GUTS_PMUXCR_SSI1_MASK 0x0000C000 /* Bitmask for SSI1 */ +#define CCSR_GUTS_PMUXCR_SSI1_LA 0x00000000 /* Latched address */ +#define CCSR_GUTS_PMUXCR_SSI1_HI 0x00004000 /* High impedance */ +#define CCSR_GUTS_PMUXCR_SSI1_SSI 0x00008000 /* Used for SSI1 */ +#define CCSR_GUTS_PMUXCR_SSI2_MASK 0x00003000 /* Bitmask for SSI2 */ +#define CCSR_GUTS_PMUXCR_SSI2_LA 0x00000000 /* Latched address */ +#define CCSR_GUTS_PMUXCR_SSI2_HI 0x00001000 /* High impedance */ +#define CCSR_GUTS_PMUXCR_SSI2_SSI 0x00002000 /* Used for SSI2 */ +#define CCSR_GUTS_PMUXCR_LA_22_25_LA 0x00000000 /* Latched Address */ +#define CCSR_GUTS_PMUXCR_LA_22_25_HI 0x00000400 /* High impedance */ +#define CCSR_GUTS_PMUXCR_DBGDRV 0x00000200 /* Signals not driven */ +#define CCSR_GUTS_PMUXCR_DMA2_0 0x00000008 +#define CCSR_GUTS_PMUXCR_DMA2_3 0x00000004 +#define CCSR_GUTS_PMUXCR_DMA1_0 0x00000002 +#define CCSR_GUTS_PMUXCR_DMA1_3 0x00000001 + +/* + * Set the DMA external control bits in the GUTS + * + * The DMA external control bits in the PMUXCR are only meaningful for + * channels 0 and 3. Any other channels are ignored. + * + * guts: Pointer to GUTS structure + * co: The DMA controller (0 or 1) + * ch: The channel on the DMA controller (0, 1, 2, or 3) + * value: the new value for the bit (0 or 1) + */ +static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts, + unsigned int co, unsigned int ch, unsigned int value) +{ + if ((ch == 0) || (ch == 3)) { + unsigned int shift = 2 * (co + 1) - (ch & 1) - 1; + + clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift); + } +} + +#define CCSR_GUTS_CLKDVDR_PXCKEN 0x80000000 +#define CCSR_GUTS_CLKDVDR_SSICKEN 0x20000000 +#define CCSR_GUTS_CLKDVDR_PXCKINV 0x10000000 +#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25 +#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK 0x06000000 +#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \ + (((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT) +#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT 16 +#define CCSR_GUTS_CLKDVDR_PXCLK_MASK 0x001F0000 +#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT) +#define CCSR_GUTS_CLKDVDR_SSICLK_MASK 0x000000FF +#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK) + +#endif /* __ASM_POWERPC_IMMAP_86XX_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/immap_cpm2.h b/arch/powerpc/include/asm/immap_cpm2.h new file mode 100644 index 000000000000..4080bab0468c --- /dev/null +++ b/arch/powerpc/include/asm/immap_cpm2.h @@ -0,0 +1,650 @@ +/* + * CPM2 Internal Memory Map + * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) + * + * The Internal Memory Map for devices with CPM2 on them. This + * is the superset of all CPM2 devices (8260, 8266, 8280, 8272, + * 8560). + */ +#ifdef __KERNEL__ +#ifndef __IMMAP_CPM2__ +#define __IMMAP_CPM2__ + +#include + +/* System configuration registers. +*/ +typedef struct sys_82xx_conf { + u32 sc_siumcr; + u32 sc_sypcr; + u8 res1[6]; + u16 sc_swsr; + u8 res2[20]; + u32 sc_bcr; + u8 sc_ppc_acr; + u8 res3[3]; + u32 sc_ppc_alrh; + u32 sc_ppc_alrl; + u8 sc_lcl_acr; + u8 res4[3]; + u32 sc_lcl_alrh; + u32 sc_lcl_alrl; + u32 sc_tescr1; + u32 sc_tescr2; + u32 sc_ltescr1; + u32 sc_ltescr2; + u32 sc_pdtea; + u8 sc_pdtem; + u8 res5[3]; + u32 sc_ldtea; + u8 sc_ldtem; + u8 res6[163]; +} sysconf_82xx_cpm2_t; + +typedef struct sys_85xx_conf { + u32 sc_cear; + u16 sc_ceer; + u16 sc_cemr; + u8 res1[70]; + u32 sc_smaer; + u8 res2[4]; + u32 sc_smevr; + u32 sc_smctr; + u32 sc_lmaer; + u8 res3[4]; + u32 sc_lmevr; + u32 sc_lmctr; + u8 res4[144]; +} sysconf_85xx_cpm2_t; + +typedef union sys_conf { + sysconf_82xx_cpm2_t siu_82xx; + sysconf_85xx_cpm2_t siu_85xx; +} sysconf_cpm2_t; + + + +/* Memory controller registers. +*/ +typedef struct mem_ctlr { + u32 memc_br0; + u32 memc_or0; + u32 memc_br1; + u32 memc_or1; + u32 memc_br2; + u32 memc_or2; + u32 memc_br3; + u32 memc_or3; + u32 memc_br4; + u32 memc_or4; + u32 memc_br5; + u32 memc_or5; + u32 memc_br6; + u32 memc_or6; + u32 memc_br7; + u32 memc_or7; + u32 memc_br8; + u32 memc_or8; + u32 memc_br9; + u32 memc_or9; + u32 memc_br10; + u32 memc_or10; + u32 memc_br11; + u32 memc_or11; + u8 res1[8]; + u32 memc_mar; + u8 res2[4]; + u32 memc_mamr; + u32 memc_mbmr; + u32 memc_mcmr; + u8 res3[8]; + u16 memc_mptpr; + u8 res4[2]; + u32 memc_mdr; + u8 res5[4]; + u32 memc_psdmr; + u32 memc_lsdmr; + u8 memc_purt; + u8 res6[3]; + u8 memc_psrt; + u8 res7[3]; + u8 memc_lurt; + u8 res8[3]; + u8 memc_lsrt; + u8 res9[3]; + u32 memc_immr; + u32 memc_pcibr0; + u32 memc_pcibr1; + u8 res10[16]; + u32 memc_pcimsk0; + u32 memc_pcimsk1; + u8 res11[52]; +} memctl_cpm2_t; + +/* System Integration Timers. +*/ +typedef struct sys_int_timers { + u8 res1[32]; + u16 sit_tmcntsc; + u8 res2[2]; + u32 sit_tmcnt; + u8 res3[4]; + u32 sit_tmcntal; + u8 res4[16]; + u16 sit_piscr; + u8 res5[2]; + u32 sit_pitc; + u32 sit_pitr; + u8 res6[94]; + u8 res7[390]; +} sit_cpm2_t; + +#define PISCR_PIRQ_MASK ((u16)0xff00) +#define PISCR_PS ((u16)0x0080) +#define PISCR_PIE ((u16)0x0004) +#define PISCR_PTF ((u16)0x0002) +#define PISCR_PTE ((u16)0x0001) + +/* PCI Controller. +*/ +typedef struct pci_ctlr { + u32 pci_omisr; + u32 pci_omimr; + u8 res1[8]; + u32 pci_ifqpr; + u32 pci_ofqpr; + u8 res2[8]; + u32 pci_imr0; + u32 pci_imr1; + u32 pci_omr0; + u32 pci_omr1; + u32 pci_odr; + u8 res3[4]; + u32 pci_idr; + u8 res4[20]; + u32 pci_imisr; + u32 pci_imimr; + u8 res5[24]; + u32 pci_ifhpr; + u8 res6[4]; + u32 pci_iftpr; + u8 res7[4]; + u32 pci_iphpr; + u8 res8[4]; + u32 pci_iptpr; + u8 res9[4]; + u32 pci_ofhpr; + u8 res10[4]; + u32 pci_oftpr; + u8 res11[4]; + u32 pci_ophpr; + u8 res12[4]; + u32 pci_optpr; + u8 res13[8]; + u32 pci_mucr; + u8 res14[8]; + u32 pci_qbar; + u8 res15[12]; + u32 pci_dmamr0; + u32 pci_dmasr0; + u32 pci_dmacdar0; + u8 res16[4]; + u32 pci_dmasar0; + u8 res17[4]; + u32 pci_dmadar0; + u8 res18[4]; + u32 pci_dmabcr0; + u32 pci_dmandar0; + u8 res19[86]; + u32 pci_dmamr1; + u32 pci_dmasr1; + u32 pci_dmacdar1; + u8 res20[4]; + u32 pci_dmasar1; + u8 res21[4]; + u32 pci_dmadar1; + u8 res22[4]; + u32 pci_dmabcr1; + u32 pci_dmandar1; + u8 res23[88]; + u32 pci_dmamr2; + u32 pci_dmasr2; + u32 pci_dmacdar2; + u8 res24[4]; + u32 pci_dmasar2; + u8 res25[4]; + u32 pci_dmadar2; + u8 res26[4]; + u32 pci_dmabcr2; + u32 pci_dmandar2; + u8 res27[88]; + u32 pci_dmamr3; + u32 pci_dmasr3; + u32 pci_dmacdar3; + u8 res28[4]; + u32 pci_dmasar3; + u8 res29[4]; + u32 pci_dmadar3; + u8 res30[4]; + u32 pci_dmabcr3; + u32 pci_dmandar3; + u8 res31[344]; + u32 pci_potar0; + u8 res32[4]; + u32 pci_pobar0; + u8 res33[4]; + u32 pci_pocmr0; + u8 res34[4]; + u32 pci_potar1; + u8 res35[4]; + u32 pci_pobar1; + u8 res36[4]; + u32 pci_pocmr1; + u8 res37[4]; + u32 pci_potar2; + u8 res38[4]; + u32 pci_pobar2; + u8 res39[4]; + u32 pci_pocmr2; + u8 res40[50]; + u32 pci_ptcr; + u32 pci_gpcr; + u32 pci_gcr; + u32 pci_esr; + u32 pci_emr; + u32 pci_ecr; + u32 pci_eacr; + u8 res41[4]; + u32 pci_edcr; + u8 res42[4]; + u32 pci_eccr; + u8 res43[44]; + u32 pci_pitar1; + u8 res44[4]; + u32 pci_pibar1; + u8 res45[4]; + u32 pci_picmr1; + u8 res46[4]; + u32 pci_pitar0; + u8 res47[4]; + u32 pci_pibar0; + u8 res48[4]; + u32 pci_picmr0; + u8 res49[4]; + u32 pci_cfg_addr; + u32 pci_cfg_data; + u32 pci_int_ack; + u8 res50[756]; +} pci_cpm2_t; + +/* Interrupt Controller. +*/ +typedef struct interrupt_controller { + u16 ic_sicr; + u8 res1[2]; + u32 ic_sivec; + u32 ic_sipnrh; + u32 ic_sipnrl; + u32 ic_siprr; + u32 ic_scprrh; + u32 ic_scprrl; + u32 ic_simrh; + u32 ic_simrl; + u32 ic_siexr; + u8 res2[88]; +} intctl_cpm2_t; + +/* Clocks and Reset. +*/ +typedef struct clk_and_reset { + u32 car_sccr; + u8 res1[4]; + u32 car_scmr; + u8 res2[4]; + u32 car_rsr; + u32 car_rmr; + u8 res[104]; +} car_cpm2_t; + +/* Input/Output Port control/status registers. + * Names consistent with processor manual, although they are different + * from the original 8xx names....... + */ +typedef struct io_port { + u32 iop_pdira; + u32 iop_ppara; + u32 iop_psora; + u32 iop_podra; + u32 iop_pdata; + u8 res1[12]; + u32 iop_pdirb; + u32 iop_pparb; + u32 iop_psorb; + u32 iop_podrb; + u32 iop_pdatb; + u8 res2[12]; + u32 iop_pdirc; + u32 iop_pparc; + u32 iop_psorc; + u32 iop_podrc; + u32 iop_pdatc; + u8 res3[12]; + u32 iop_pdird; + u32 iop_ppard; + u32 iop_psord; + u32 iop_podrd; + u32 iop_pdatd; + u8 res4[12]; +} iop_cpm2_t; + +/* Communication Processor Module Timers +*/ +typedef struct cpm_timers { + u8 cpmt_tgcr1; + u8 res1[3]; + u8 cpmt_tgcr2; + u8 res2[11]; + u16 cpmt_tmr1; + u16 cpmt_tmr2; + u16 cpmt_trr1; + u16 cpmt_trr2; + u16 cpmt_tcr1; + u16 cpmt_tcr2; + u16 cpmt_tcn1; + u16 cpmt_tcn2; + u16 cpmt_tmr3; + u16 cpmt_tmr4; + u16 cpmt_trr3; + u16 cpmt_trr4; + u16 cpmt_tcr3; + u16 cpmt_tcr4; + u16 cpmt_tcn3; + u16 cpmt_tcn4; + u16 cpmt_ter1; + u16 cpmt_ter2; + u16 cpmt_ter3; + u16 cpmt_ter4; + u8 res3[584]; +} cpmtimer_cpm2_t; + +/* DMA control/status registers. +*/ +typedef struct sdma_csr { + u8 res0[24]; + u8 sdma_sdsr; + u8 res1[3]; + u8 sdma_sdmr; + u8 res2[3]; + u8 sdma_idsr1; + u8 res3[3]; + u8 sdma_idmr1; + u8 res4[3]; + u8 sdma_idsr2; + u8 res5[3]; + u8 sdma_idmr2; + u8 res6[3]; + u8 sdma_idsr3; + u8 res7[3]; + u8 sdma_idmr3; + u8 res8[3]; + u8 sdma_idsr4; + u8 res9[3]; + u8 sdma_idmr4; + u8 res10[707]; +} sdma_cpm2_t; + +/* Fast controllers +*/ +typedef struct fcc { + u32 fcc_gfmr; + u32 fcc_fpsmr; + u16 fcc_ftodr; + u8 res1[2]; + u16 fcc_fdsr; + u8 res2[2]; + u16 fcc_fcce; + u8 res3[2]; + u16 fcc_fccm; + u8 res4[2]; + u8 fcc_fccs; + u8 res5[3]; + u8 fcc_ftirr_phy[4]; +} fcc_t; + +/* Fast controllers continued + */ +typedef struct fcc_c { + u32 fcc_firper; + u32 fcc_firer; + u32 fcc_firsr_hi; + u32 fcc_firsr_lo; + u8 fcc_gfemr; + u8 res1[15]; +} fcc_c_t; + +/* TC Layer + */ +typedef struct tclayer { + u16 tc_tcmode; + u16 tc_cdsmr; + u16 tc_tcer; + u16 tc_rcc; + u16 tc_tcmr; + u16 tc_fcc; + u16 tc_ccc; + u16 tc_icc; + u16 tc_tcc; + u16 tc_ecc; + u8 res1[12]; +} tclayer_t; + + +/* I2C +*/ +typedef struct i2c { + u8 i2c_i2mod; + u8 res1[3]; + u8 i2c_i2add; + u8 res2[3]; + u8 i2c_i2brg; + u8 res3[3]; + u8 i2c_i2com; + u8 res4[3]; + u8 i2c_i2cer; + u8 res5[3]; + u8 i2c_i2cmr; + u8 res6[331]; +} i2c_cpm2_t; + +typedef struct scc { /* Serial communication channels */ + u32 scc_gsmrl; + u32 scc_gsmrh; + u16 scc_psmr; + u8 res1[2]; + u16 scc_todr; + u16 scc_dsr; + u16 scc_scce; + u8 res2[2]; + u16 scc_sccm; + u8 res3; + u8 scc_sccs; + u8 res4[8]; +} scc_t; + +typedef struct smc { /* Serial management channels */ + u8 res1[2]; + u16 smc_smcmr; + u8 res2[2]; + u8 smc_smce; + u8 res3[3]; + u8 smc_smcm; + u8 res4[5]; +} smc_t; + +/* Serial Peripheral Interface. +*/ +typedef struct spi_ctrl { + u16 spi_spmode; + u8 res1[4]; + u8 spi_spie; + u8 res2[3]; + u8 spi_spim; + u8 res3[2]; + u8 spi_spcom; + u8 res4[82]; +} spictl_cpm2_t; + +/* CPM Mux. +*/ +typedef struct cpmux { + u8 cmx_si1cr; + u8 res1; + u8 cmx_si2cr; + u8 res2; + u32 cmx_fcr; + u32 cmx_scr; + u8 cmx_smr; + u8 res3; + u16 cmx_uar; + u8 res4[16]; +} cpmux_t; + +/* SIRAM control +*/ +typedef struct siram { + u16 si_amr; + u16 si_bmr; + u16 si_cmr; + u16 si_dmr; + u8 si_gmr; + u8 res1; + u8 si_cmdr; + u8 res2; + u8 si_str; + u8 res3; + u16 si_rsr; +} siramctl_t; + +typedef struct mcc { + u16 mcc_mcce; + u8 res1[2]; + u16 mcc_mccm; + u8 res2[2]; + u8 mcc_mccf; + u8 res3[7]; +} mcc_t; + +typedef struct comm_proc { + u32 cp_cpcr; + u32 cp_rccr; + u8 res1[14]; + u16 cp_rter; + u8 res2[2]; + u16 cp_rtmr; + u16 cp_rtscr; + u8 res3[2]; + u32 cp_rtsr; + u8 res4[12]; +} cpm_cpm2_t; + +/* USB Controller. +*/ +typedef struct usb_ctlr { + u8 usb_usmod; + u8 usb_usadr; + u8 usb_uscom; + u8 res1[1]; + u16 usb_usep1; + u16 usb_usep2; + u16 usb_usep3; + u16 usb_usep4; + u8 res2[4]; + u16 usb_usber; + u8 res3[2]; + u16 usb_usbmr; + u8 usb_usbs; + u8 res4[7]; +} usb_cpm2_t; + +/* ...and the whole thing wrapped up.... +*/ + +typedef struct immap { + /* Some references are into the unique and known dpram spaces, + * others are from the generic base. + */ +#define im_dprambase im_dpram1 + u8 im_dpram1[16*1024]; + u8 res1[16*1024]; + u8 im_dpram2[4*1024]; + u8 res2[8*1024]; + u8 im_dpram3[4*1024]; + u8 res3[16*1024]; + + sysconf_cpm2_t im_siu_conf; /* SIU Configuration */ + memctl_cpm2_t im_memctl; /* Memory Controller */ + sit_cpm2_t im_sit; /* System Integration Timers */ + pci_cpm2_t im_pci; /* PCI Controller */ + intctl_cpm2_t im_intctl; /* Interrupt Controller */ + car_cpm2_t im_clkrst; /* Clocks and reset */ + iop_cpm2_t im_ioport; /* IO Port control/status */ + cpmtimer_cpm2_t im_cpmtimer; /* CPM timers */ + sdma_cpm2_t im_sdma; /* SDMA control/status */ + + fcc_t im_fcc[3]; /* Three FCCs */ + u8 res4z[32]; + fcc_c_t im_fcc_c[3]; /* Continued FCCs */ + + u8 res4[32]; + + tclayer_t im_tclayer[8]; /* Eight TCLayers */ + u16 tc_tcgsr; + u16 tc_tcger; + + /* First set of baud rate generators. + */ + u8 res[236]; + u32 im_brgc5; + u32 im_brgc6; + u32 im_brgc7; + u32 im_brgc8; + + u8 res5[608]; + + i2c_cpm2_t im_i2c; /* I2C control/status */ + cpm_cpm2_t im_cpm; /* Communication processor */ + + /* Second set of baud rate generators. + */ + u32 im_brgc1; + u32 im_brgc2; + u32 im_brgc3; + u32 im_brgc4; + + scc_t im_scc[4]; /* Four SCCs */ + smc_t im_smc[2]; /* Couple of SMCs */ + spictl_cpm2_t im_spi; /* A SPI */ + cpmux_t im_cpmux; /* CPM clock route mux */ + siramctl_t im_siramctl1; /* First SI RAM Control */ + mcc_t im_mcc1; /* First MCC */ + siramctl_t im_siramctl2; /* Second SI RAM Control */ + mcc_t im_mcc2; /* Second MCC */ + usb_cpm2_t im_usb; /* USB Controller */ + + u8 res6[1153]; + + u16 im_si1txram[256]; + u8 res7[512]; + u16 im_si1rxram[256]; + u8 res8[512]; + u16 im_si2txram[256]; + u8 res9[512]; + u16 im_si2rxram[256]; + u8 res10[512]; + u8 res11[4096]; +} cpm2_map_t; + +extern cpm2_map_t __iomem *cpm2_immr; + +#endif /* __IMMAP_CPM2__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h new file mode 100644 index 000000000000..3c2fced3ac22 --- /dev/null +++ b/arch/powerpc/include/asm/immap_qe.h @@ -0,0 +1,483 @@ +/* + * QUICC Engine (QE) Internal Memory Map. + * The Internal Memory Map for devices with QE on them. This + * is the superset of all QE devices (8360, etc.). + + * Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_POWERPC_IMMAP_QE_H +#define _ASM_POWERPC_IMMAP_QE_H +#ifdef __KERNEL__ + +#include +#include + +#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */ + +/* QE I-RAM */ +struct qe_iram { + __be32 iadd; /* I-RAM Address Register */ + __be32 idata; /* I-RAM Data Register */ + u8 res0[0x78]; +} __attribute__ ((packed)); + +/* QE Interrupt Controller */ +struct qe_ic_regs { + __be32 qicr; + __be32 qivec; + __be32 qripnr; + __be32 qipnr; + __be32 qipxcc; + __be32 qipycc; + __be32 qipwcc; + __be32 qipzcc; + __be32 qimr; + __be32 qrimr; + __be32 qicnr; + u8 res0[0x4]; + __be32 qiprta; + __be32 qiprtb; + u8 res1[0x4]; + __be32 qricr; + u8 res2[0x20]; + __be32 qhivec; + u8 res3[0x1C]; +} __attribute__ ((packed)); + +/* Communications Processor */ +struct cp_qe { + __be32 cecr; /* QE command register */ + __be32 ceccr; /* QE controller configuration register */ + __be32 cecdr; /* QE command data register */ + u8 res0[0xA]; + __be16 ceter; /* QE timer event register */ + u8 res1[0x2]; + __be16 cetmr; /* QE timers mask register */ + __be32 cetscr; /* QE time-stamp timer control register */ + __be32 cetsr1; /* QE time-stamp register 1 */ + __be32 cetsr2; /* QE time-stamp register 2 */ + u8 res2[0x8]; + __be32 cevter; /* QE virtual tasks event register */ + __be32 cevtmr; /* QE virtual tasks mask register */ + __be16 cercr; /* QE RAM control register */ + u8 res3[0x2]; + u8 res4[0x24]; + __be16 ceexe1; /* QE external request 1 event register */ + u8 res5[0x2]; + __be16 ceexm1; /* QE external request 1 mask register */ + u8 res6[0x2]; + __be16 ceexe2; /* QE external request 2 event register */ + u8 res7[0x2]; + __be16 ceexm2; /* QE external request 2 mask register */ + u8 res8[0x2]; + __be16 ceexe3; /* QE external request 3 event register */ + u8 res9[0x2]; + __be16 ceexm3; /* QE external request 3 mask register */ + u8 res10[0x2]; + __be16 ceexe4; /* QE external request 4 event register */ + u8 res11[0x2]; + __be16 ceexm4; /* QE external request 4 mask register */ + u8 res12[0x3A]; + __be32 ceurnr; /* QE microcode revision number register */ + u8 res13[0x244]; +} __attribute__ ((packed)); + +/* QE Multiplexer */ +struct qe_mux { + __be32 cmxgcr; /* CMX general clock route register */ + __be32 cmxsi1cr_l; /* CMX SI1 clock route low register */ + __be32 cmxsi1cr_h; /* CMX SI1 clock route high register */ + __be32 cmxsi1syr; /* CMX SI1 SYNC route register */ + __be32 cmxucr[4]; /* CMX UCCx clock route registers */ + __be32 cmxupcr; /* CMX UPC clock route register */ + u8 res0[0x1C]; +} __attribute__ ((packed)); + +/* QE Timers */ +struct qe_timers { + u8 gtcfr1; /* Timer 1 and Timer 2 global config register*/ + u8 res0[0x3]; + u8 gtcfr2; /* Timer 3 and timer 4 global config register*/ + u8 res1[0xB]; + __be16 gtmdr1; /* Timer 1 mode register */ + __be16 gtmdr2; /* Timer 2 mode register */ + __be16 gtrfr1; /* Timer 1 reference register */ + __be16 gtrfr2; /* Timer 2 reference register */ + __be16 gtcpr1; /* Timer 1 capture register */ + __be16 gtcpr2; /* Timer 2 capture register */ + __be16 gtcnr1; /* Timer 1 counter */ + __be16 gtcnr2; /* Timer 2 counter */ + __be16 gtmdr3; /* Timer 3 mode register */ + __be16 gtmdr4; /* Timer 4 mode register */ + __be16 gtrfr3; /* Timer 3 reference register */ + __be16 gtrfr4; /* Timer 4 reference register */ + __be16 gtcpr3; /* Timer 3 capture register */ + __be16 gtcpr4; /* Timer 4 capture register */ + __be16 gtcnr3; /* Timer 3 counter */ + __be16 gtcnr4; /* Timer 4 counter */ + __be16 gtevr1; /* Timer 1 event register */ + __be16 gtevr2; /* Timer 2 event register */ + __be16 gtevr3; /* Timer 3 event register */ + __be16 gtevr4; /* Timer 4 event register */ + __be16 gtps; /* Timer 1 prescale register */ + u8 res2[0x46]; +} __attribute__ ((packed)); + +/* BRG */ +struct qe_brg { + __be32 brgc[16]; /* BRG configuration registers */ + u8 res0[0x40]; +} __attribute__ ((packed)); + +/* SPI */ +struct spi { + u8 res0[0x20]; + __be32 spmode; /* SPI mode register */ + u8 res1[0x2]; + u8 spie; /* SPI event register */ + u8 res2[0x1]; + u8 res3[0x2]; + u8 spim; /* SPI mask register */ + u8 res4[0x1]; + u8 res5[0x1]; + u8 spcom; /* SPI command register */ + u8 res6[0x2]; + __be32 spitd; /* SPI transmit data register (cpu mode) */ + __be32 spird; /* SPI receive data register (cpu mode) */ + u8 res7[0x8]; +} __attribute__ ((packed)); + +/* SI */ +struct si1 { + __be16 siamr1; /* SI1 TDMA mode register */ + __be16 sibmr1; /* SI1 TDMB mode register */ + __be16 sicmr1; /* SI1 TDMC mode register */ + __be16 sidmr1; /* SI1 TDMD mode register */ + u8 siglmr1_h; /* SI1 global mode register high */ + u8 res0[0x1]; + u8 sicmdr1_h; /* SI1 command register high */ + u8 res2[0x1]; + u8 sistr1_h; /* SI1 status register high */ + u8 res3[0x1]; + __be16 sirsr1_h; /* SI1 RAM shadow address register high */ + u8 sitarc1; /* SI1 RAM counter Tx TDMA */ + u8 sitbrc1; /* SI1 RAM counter Tx TDMB */ + u8 sitcrc1; /* SI1 RAM counter Tx TDMC */ + u8 sitdrc1; /* SI1 RAM counter Tx TDMD */ + u8 sirarc1; /* SI1 RAM counter Rx TDMA */ + u8 sirbrc1; /* SI1 RAM counter Rx TDMB */ + u8 sircrc1; /* SI1 RAM counter Rx TDMC */ + u8 sirdrc1; /* SI1 RAM counter Rx TDMD */ + u8 res4[0x8]; + __be16 siemr1; /* SI1 TDME mode register 16 bits */ + __be16 sifmr1; /* SI1 TDMF mode register 16 bits */ + __be16 sigmr1; /* SI1 TDMG mode register 16 bits */ + __be16 sihmr1; /* SI1 TDMH mode register 16 bits */ + u8 siglmg1_l; /* SI1 global mode register low 8 bits */ + u8 res5[0x1]; + u8 sicmdr1_l; /* SI1 command register low 8 bits */ + u8 res6[0x1]; + u8 sistr1_l; /* SI1 status register low 8 bits */ + u8 res7[0x1]; + __be16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits*/ + u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */ + u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */ + u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */ + u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */ + u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */ + u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */ + u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */ + u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */ + u8 res8[0x8]; + __be32 siml1; /* SI1 multiframe limit register */ + u8 siedm1; /* SI1 extended diagnostic mode register */ + u8 res9[0xBB]; +} __attribute__ ((packed)); + +/* SI Routing Tables */ +struct sir { + u8 tx[0x400]; + u8 rx[0x400]; + u8 res0[0x800]; +} __attribute__ ((packed)); + +/* USB Controller */ +struct usb_ctlr { + u8 usb_usmod; + u8 usb_usadr; + u8 usb_uscom; + u8 res1[1]; + __be16 usb_usep1; + __be16 usb_usep2; + __be16 usb_usep3; + __be16 usb_usep4; + u8 res2[4]; + __be16 usb_usber; + u8 res3[2]; + __be16 usb_usbmr; + u8 res4[1]; + u8 usb_usbs; + __be16 usb_ussft; + u8 res5[2]; + __be16 usb_usfrn; + u8 res6[0x22]; +} __attribute__ ((packed)); + +/* MCC */ +struct mcc { + __be32 mcce; /* MCC event register */ + __be32 mccm; /* MCC mask register */ + __be32 mccf; /* MCC configuration register */ + __be32 merl; /* MCC emergency request level register */ + u8 res0[0xF0]; +} __attribute__ ((packed)); + +/* QE UCC Slow */ +struct ucc_slow { + __be32 gumr_l; /* UCCx general mode register (low) */ + __be32 gumr_h; /* UCCx general mode register (high) */ + __be16 upsmr; /* UCCx protocol-specific mode register */ + u8 res0[0x2]; + __be16 utodr; /* UCCx transmit on demand register */ + __be16 udsr; /* UCCx data synchronization register */ + __be16 ucce; /* UCCx event register */ + u8 res1[0x2]; + __be16 uccm; /* UCCx mask register */ + u8 res2[0x1]; + u8 uccs; /* UCCx status register */ + u8 res3[0x24]; + __be16 utpt; + u8 res4[0x52]; + u8 guemr; /* UCC general extended mode register */ +} __attribute__ ((packed)); + +/* QE UCC Fast */ +struct ucc_fast { + __be32 gumr; /* UCCx general mode register */ + __be32 upsmr; /* UCCx protocol-specific mode register */ + __be16 utodr; /* UCCx transmit on demand register */ + u8 res0[0x2]; + __be16 udsr; /* UCCx data synchronization register */ + u8 res1[0x2]; + __be32 ucce; /* UCCx event register */ + __be32 uccm; /* UCCx mask register */ + u8 uccs; /* UCCx status register */ + u8 res2[0x7]; + __be32 urfb; /* UCC receive FIFO base */ + __be16 urfs; /* UCC receive FIFO size */ + u8 res3[0x2]; + __be16 urfet; /* UCC receive FIFO emergency threshold */ + __be16 urfset; /* UCC receive FIFO special emergency + threshold */ + __be32 utfb; /* UCC transmit FIFO base */ + __be16 utfs; /* UCC transmit FIFO size */ + u8 res4[0x2]; + __be16 utfet; /* UCC transmit FIFO emergency threshold */ + u8 res5[0x2]; + __be16 utftt; /* UCC transmit FIFO transmit threshold */ + u8 res6[0x2]; + __be16 utpt; /* UCC transmit polling timer */ + u8 res7[0x2]; + __be32 urtry; /* UCC retry counter register */ + u8 res8[0x4C]; + u8 guemr; /* UCC general extended mode register */ +} __attribute__ ((packed)); + +struct ucc { + union { + struct ucc_slow slow; + struct ucc_fast fast; + u8 res[0x200]; /* UCC blocks are 512 bytes each */ + }; +} __attribute__ ((packed)); + +/* MultiPHY UTOPIA POS Controllers (UPC) */ +struct upc { + __be32 upgcr; /* UTOPIA/POS general configuration register */ + __be32 uplpa; /* UTOPIA/POS last PHY address */ + __be32 uphec; /* ATM HEC register */ + __be32 upuc; /* UTOPIA/POS UCC configuration */ + __be32 updc1; /* UTOPIA/POS device 1 configuration */ + __be32 updc2; /* UTOPIA/POS device 2 configuration */ + __be32 updc3; /* UTOPIA/POS device 3 configuration */ + __be32 updc4; /* UTOPIA/POS device 4 configuration */ + __be32 upstpa; /* UTOPIA/POS STPA threshold */ + u8 res0[0xC]; + __be32 updrs1_h; /* UTOPIA/POS device 1 rate select */ + __be32 updrs1_l; /* UTOPIA/POS device 1 rate select */ + __be32 updrs2_h; /* UTOPIA/POS device 2 rate select */ + __be32 updrs2_l; /* UTOPIA/POS device 2 rate select */ + __be32 updrs3_h; /* UTOPIA/POS device 3 rate select */ + __be32 updrs3_l; /* UTOPIA/POS device 3 rate select */ + __be32 updrs4_h; /* UTOPIA/POS device 4 rate select */ + __be32 updrs4_l; /* UTOPIA/POS device 4 rate select */ + __be32 updrp1; /* UTOPIA/POS device 1 receive priority low */ + __be32 updrp2; /* UTOPIA/POS device 2 receive priority low */ + __be32 updrp3; /* UTOPIA/POS device 3 receive priority low */ + __be32 updrp4; /* UTOPIA/POS device 4 receive priority low */ + __be32 upde1; /* UTOPIA/POS device 1 event */ + __be32 upde2; /* UTOPIA/POS device 2 event */ + __be32 upde3; /* UTOPIA/POS device 3 event */ + __be32 upde4; /* UTOPIA/POS device 4 event */ + __be16 uprp1; + __be16 uprp2; + __be16 uprp3; + __be16 uprp4; + u8 res1[0x8]; + __be16 uptirr1_0; /* Device 1 transmit internal rate 0 */ + __be16 uptirr1_1; /* Device 1 transmit internal rate 1 */ + __be16 uptirr1_2; /* Device 1 transmit internal rate 2 */ + __be16 uptirr1_3; /* Device 1 transmit internal rate 3 */ + __be16 uptirr2_0; /* Device 2 transmit internal rate 0 */ + __be16 uptirr2_1; /* Device 2 transmit internal rate 1 */ + __be16 uptirr2_2; /* Device 2 transmit internal rate 2 */ + __be16 uptirr2_3; /* Device 2 transmit internal rate 3 */ + __be16 uptirr3_0; /* Device 3 transmit internal rate 0 */ + __be16 uptirr3_1; /* Device 3 transmit internal rate 1 */ + __be16 uptirr3_2; /* Device 3 transmit internal rate 2 */ + __be16 uptirr3_3; /* Device 3 transmit internal rate 3 */ + __be16 uptirr4_0; /* Device 4 transmit internal rate 0 */ + __be16 uptirr4_1; /* Device 4 transmit internal rate 1 */ + __be16 uptirr4_2; /* Device 4 transmit internal rate 2 */ + __be16 uptirr4_3; /* Device 4 transmit internal rate 3 */ + __be32 uper1; /* Device 1 port enable register */ + __be32 uper2; /* Device 2 port enable register */ + __be32 uper3; /* Device 3 port enable register */ + __be32 uper4; /* Device 4 port enable register */ + u8 res2[0x150]; +} __attribute__ ((packed)); + +/* SDMA */ +struct sdma { + __be32 sdsr; /* Serial DMA status register */ + __be32 sdmr; /* Serial DMA mode register */ + __be32 sdtr1; /* SDMA system bus threshold register */ + __be32 sdtr2; /* SDMA secondary bus threshold register */ + __be32 sdhy1; /* SDMA system bus hysteresis register */ + __be32 sdhy2; /* SDMA secondary bus hysteresis register */ + __be32 sdta1; /* SDMA system bus address register */ + __be32 sdta2; /* SDMA secondary bus address register */ + __be32 sdtm1; /* SDMA system bus MSNUM register */ + __be32 sdtm2; /* SDMA secondary bus MSNUM register */ + u8 res0[0x10]; + __be32 sdaqr; /* SDMA address bus qualify register */ + __be32 sdaqmr; /* SDMA address bus qualify mask register */ + u8 res1[0x4]; + __be32 sdebcr; /* SDMA CAM entries base register */ + u8 res2[0x38]; +} __attribute__ ((packed)); + +/* Debug Space */ +struct dbg { + __be32 bpdcr; /* Breakpoint debug command register */ + __be32 bpdsr; /* Breakpoint debug status register */ + __be32 bpdmr; /* Breakpoint debug mask register */ + __be32 bprmrr0; /* Breakpoint request mode risc register 0 */ + __be32 bprmrr1; /* Breakpoint request mode risc register 1 */ + u8 res0[0x8]; + __be32 bprmtr0; /* Breakpoint request mode trb register 0 */ + __be32 bprmtr1; /* Breakpoint request mode trb register 1 */ + u8 res1[0x8]; + __be32 bprmir; /* Breakpoint request mode immediate register */ + __be32 bprmsr; /* Breakpoint request mode serial register */ + __be32 bpemr; /* Breakpoint exit mode register */ + u8 res2[0x48]; +} __attribute__ ((packed)); + +/* + * RISC Special Registers (Trap and Breakpoint). These are described in + * the QE Developer's Handbook. + */ +struct rsp { + __be32 tibcr[16]; /* Trap/instruction breakpoint control regs */ + u8 res0[64]; + __be32 ibcr0; + __be32 ibs0; + __be32 ibcnr0; + u8 res1[4]; + __be32 ibcr1; + __be32 ibs1; + __be32 ibcnr1; + __be32 npcr; + __be32 dbcr; + __be32 dbar; + __be32 dbamr; + __be32 dbsr; + __be32 dbcnr; + u8 res2[12]; + __be32 dbdr_h; + __be32 dbdr_l; + __be32 dbdmr_h; + __be32 dbdmr_l; + __be32 bsr; + __be32 bor; + __be32 bior; + u8 res3[4]; + __be32 iatr[4]; + __be32 eccr; /* Exception control configuration register */ + __be32 eicr; + u8 res4[0x100-0xf8]; +} __attribute__ ((packed)); + +struct qe_immap { + struct qe_iram iram; /* I-RAM */ + struct qe_ic_regs ic; /* Interrupt Controller */ + struct cp_qe cp; /* Communications Processor */ + struct qe_mux qmx; /* QE Multiplexer */ + struct qe_timers qet; /* QE Timers */ + struct spi spi[0x2]; /* spi */ + struct mcc mcc; /* mcc */ + struct qe_brg brg; /* brg */ + struct usb_ctlr usb; /* USB */ + struct si1 si1; /* SI */ + u8 res11[0x800]; + struct sir sir; /* SI Routing Tables */ + struct ucc ucc1; /* ucc1 */ + struct ucc ucc3; /* ucc3 */ + struct ucc ucc5; /* ucc5 */ + struct ucc ucc7; /* ucc7 */ + u8 res12[0x600]; + struct upc upc1; /* MultiPHY UTOPIA POS Ctrlr 1*/ + struct ucc ucc2; /* ucc2 */ + struct ucc ucc4; /* ucc4 */ + struct ucc ucc6; /* ucc6 */ + struct ucc ucc8; /* ucc8 */ + u8 res13[0x600]; + struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/ + struct sdma sdma; /* SDMA */ + struct dbg dbg; /* 0x104080 - 0x1040FF + Debug Space */ + struct rsp rsp[0x2]; /* 0x104100 - 0x1042FF + RISC Special Registers + (Trap and Breakpoint) */ + u8 res14[0x300]; /* 0x104300 - 0x1045FF */ + u8 res15[0x3A00]; /* 0x104600 - 0x107FFF */ + u8 res16[0x8000]; /* 0x108000 - 0x110000 */ + u8 muram[0xC000]; /* 0x110000 - 0x11C000 + Multi-user RAM */ + u8 res17[0x24000]; /* 0x11C000 - 0x140000 */ + u8 res18[0xC0000]; /* 0x140000 - 0x200000 */ +} __attribute__ ((packed)); + +extern struct qe_immap __iomem *qe_immr; +extern phys_addr_t get_qe_base(void); + +static inline unsigned long immrbar_virt_to_phys(void *address) +{ + if ( ((u32)address >= (u32)qe_immr) && + ((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) ) + return (unsigned long)(address - (u32)qe_immr + + (u32)get_qe_base()); + return (unsigned long)virt_to_phys(address); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_IMMAP_QE_H */ diff --git a/arch/powerpc/include/asm/io-defs.h b/arch/powerpc/include/asm/io-defs.h new file mode 100644 index 000000000000..44d7927aec69 --- /dev/null +++ b/arch/powerpc/include/asm/io-defs.h @@ -0,0 +1,60 @@ +/* This file is meant to be include multiple times by other headers */ +/* last 2 argments are used by platforms/cell/io-workarounds.[ch] */ + +DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr) + +#ifdef __powerpc64__ +DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +#endif /* __powerpc64__ */ + +DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port) +DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port), pio, port) +DEF_PCI_AC_RET(inl, u32, (unsigned long port), (port), pio, port) +DEF_PCI_AC_NORET(outb, (u8 val, unsigned long port), (val, port), pio, port) +DEF_PCI_AC_NORET(outw, (u16 val, unsigned long port), (val, port), pio, port) +DEF_PCI_AC_NORET(outl, (u32 val, unsigned long port), (val, port), pio, port) + +DEF_PCI_AC_NORET(readsb, (const PCI_IO_ADDR a, void *b, unsigned long c), + (a, b, c), mem, a) +DEF_PCI_AC_NORET(readsw, (const PCI_IO_ADDR a, void *b, unsigned long c), + (a, b, c), mem, a) +DEF_PCI_AC_NORET(readsl, (const PCI_IO_ADDR a, void *b, unsigned long c), + (a, b, c), mem, a) +DEF_PCI_AC_NORET(writesb, (PCI_IO_ADDR a, const void *b, unsigned long c), + (a, b, c), mem, a) +DEF_PCI_AC_NORET(writesw, (PCI_IO_ADDR a, const void *b, unsigned long c), + (a, b, c), mem, a) +DEF_PCI_AC_NORET(writesl, (PCI_IO_ADDR a, const void *b, unsigned long c), + (a, b, c), mem, a) + +DEF_PCI_AC_NORET(insb, (unsigned long p, void *b, unsigned long c), + (p, b, c), pio, p) +DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c), + (p, b, c), pio, p) +DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c), + (p, b, c), pio, p) +DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c), + (p, b, c), pio, p) +DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c), + (p, b, c), pio, p) +DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c), + (p, b, c), pio, p) + +DEF_PCI_AC_NORET(memset_io, (PCI_IO_ADDR a, int c, unsigned long n), + (a, c, n), mem, a) +DEF_PCI_AC_NORET(memcpy_fromio, (void *d, const PCI_IO_ADDR s, unsigned long n), + (d, s, n), mem, s) +DEF_PCI_AC_NORET(memcpy_toio, (PCI_IO_ADDR d, const void *s, unsigned long n), + (d, s, n), mem, d) diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h new file mode 100644 index 000000000000..77c7fa025e65 --- /dev/null +++ b/arch/powerpc/include/asm/io.h @@ -0,0 +1,787 @@ +#ifndef _ASM_POWERPC_IO_H +#define _ASM_POWERPC_IO_H +#ifdef __KERNEL__ + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* Check of existence of legacy devices */ +extern int check_legacy_ioport(unsigned long base_port); +#define I8042_DATA_REG 0x60 +#define FDC_BASE 0x3f0 +/* only relevant for PReP */ +#define _PIDXR 0x279 +#define _PNPWRP 0xa79 +#define PNPBIOS_BASE 0xf000 + +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +#ifdef CONFIG_PPC64 +#include +#endif + +#define SIO_CONFIG_RA 0x398 +#define SIO_CONFIG_RD 0x399 + +#define SLOW_DOWN_IO + +/* 32 bits uses slightly different variables for the various IO + * bases. Most of this file only uses _IO_BASE though which we + * define properly based on the platform + */ +#ifndef CONFIG_PCI +#define _IO_BASE 0 +#define _ISA_MEM_BASE 0 +#define PCI_DRAM_OFFSET 0 +#elif defined(CONFIG_PPC32) +#define _IO_BASE isa_io_base +#define _ISA_MEM_BASE isa_mem_base +#define PCI_DRAM_OFFSET pci_dram_offset +#else +#define _IO_BASE pci_io_base +#define _ISA_MEM_BASE isa_mem_base +#define PCI_DRAM_OFFSET 0 +#endif + +extern unsigned long isa_io_base; +extern unsigned long pci_io_base; +extern unsigned long pci_dram_offset; + +extern resource_size_t isa_mem_base; + +#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO) +#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits +#endif + +/* + * + * Low level MMIO accessors + * + * This provides the non-bus specific accessors to MMIO. Those are PowerPC + * specific and thus shouldn't be used in generic code. The accessors + * provided here are: + * + * in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64 + * out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64 + * _insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns + * + * Those operate directly on a kernel virtual address. Note that the prototype + * for the out_* accessors has the arguments in opposite order from the usual + * linux PCI accessors. Unlike those, they take the address first and the value + * next. + * + * Note: I might drop the _ns suffix on the stream operations soon as it is + * simply normal for stream operations to not swap in the first place. + * + */ + +#ifdef CONFIG_PPC64 +#define IO_SET_SYNC_FLAG() do { local_paca->io_sync = 1; } while(0) +#else +#define IO_SET_SYNC_FLAG() +#endif + +/* gcc 4.0 and older doesn't have 'Z' constraint */ +#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0) +#define DEF_MMIO_IN_LE(name, size, insn) \ +static inline u##size name(const volatile u##size __iomem *addr) \ +{ \ + u##size ret; \ + __asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync" \ + : "=r" (ret) : "r" (addr), "m" (*addr) : "memory"); \ + return ret; \ +} + +#define DEF_MMIO_OUT_LE(name, size, insn) \ +static inline void name(volatile u##size __iomem *addr, u##size val) \ +{ \ + __asm__ __volatile__("sync;"#insn" %1,0,%2" \ + : "=m" (*addr) : "r" (val), "r" (addr) : "memory"); \ + IO_SET_SYNC_FLAG(); \ +} +#else /* newer gcc */ +#define DEF_MMIO_IN_LE(name, size, insn) \ +static inline u##size name(const volatile u##size __iomem *addr) \ +{ \ + u##size ret; \ + __asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync" \ + : "=r" (ret) : "Z" (*addr) : "memory"); \ + return ret; \ +} + +#define DEF_MMIO_OUT_LE(name, size, insn) \ +static inline void name(volatile u##size __iomem *addr, u##size val) \ +{ \ + __asm__ __volatile__("sync;"#insn" %1,%y0" \ + : "=Z" (*addr) : "r" (val) : "memory"); \ + IO_SET_SYNC_FLAG(); \ +} +#endif + +#define DEF_MMIO_IN_BE(name, size, insn) \ +static inline u##size name(const volatile u##size __iomem *addr) \ +{ \ + u##size ret; \ + __asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\ + : "=r" (ret) : "m" (*addr) : "memory"); \ + return ret; \ +} + +#define DEF_MMIO_OUT_BE(name, size, insn) \ +static inline void name(volatile u##size __iomem *addr, u##size val) \ +{ \ + __asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0" \ + : "=m" (*addr) : "r" (val) : "memory"); \ + IO_SET_SYNC_FLAG(); \ +} + + +DEF_MMIO_IN_BE(in_8, 8, lbz); +DEF_MMIO_IN_BE(in_be16, 16, lhz); +DEF_MMIO_IN_BE(in_be32, 32, lwz); +DEF_MMIO_IN_LE(in_le16, 16, lhbrx); +DEF_MMIO_IN_LE(in_le32, 32, lwbrx); + +DEF_MMIO_OUT_BE(out_8, 8, stb); +DEF_MMIO_OUT_BE(out_be16, 16, sth); +DEF_MMIO_OUT_BE(out_be32, 32, stw); +DEF_MMIO_OUT_LE(out_le16, 16, sthbrx); +DEF_MMIO_OUT_LE(out_le32, 32, stwbrx); + +#ifdef __powerpc64__ +DEF_MMIO_OUT_BE(out_be64, 64, std); +DEF_MMIO_IN_BE(in_be64, 64, ld); + +/* There is no asm instructions for 64 bits reverse loads and stores */ +static inline u64 in_le64(const volatile u64 __iomem *addr) +{ + return swab64(in_be64(addr)); +} + +static inline void out_le64(volatile u64 __iomem *addr, u64 val) +{ + out_be64(addr, swab64(val)); +} +#endif /* __powerpc64__ */ + +/* + * Low level IO stream instructions are defined out of line for now + */ +extern void _insb(const volatile u8 __iomem *addr, void *buf, long count); +extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count); +extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count); +extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count); +extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count); +extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count); + +/* The _ns naming is historical and will be removed. For now, just #define + * the non _ns equivalent names + */ +#define _insw _insw_ns +#define _insl _insl_ns +#define _outsw _outsw_ns +#define _outsl _outsl_ns + + +/* + * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line + */ + +extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n); +extern void _memcpy_fromio(void *dest, const volatile void __iomem *src, + unsigned long n); +extern void _memcpy_toio(volatile void __iomem *dest, const void *src, + unsigned long n); + +/* + * + * PCI and standard ISA accessors + * + * Those are globally defined linux accessors for devices on PCI or ISA + * busses. They follow the Linux defined semantics. The current implementation + * for PowerPC is as close as possible to the x86 version of these, and thus + * provides fairly heavy weight barriers for the non-raw versions + * + * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO + * allowing the platform to provide its own implementation of some or all + * of the accessors. + */ + +/* + * Include the EEH definitions when EEH is enabled only so they don't get + * in the way when building for 32 bits + */ +#ifdef CONFIG_EEH +#include +#endif + +/* Shortcut to the MMIO argument pointer */ +#define PCI_IO_ADDR volatile void __iomem * + +/* Indirect IO address tokens: + * + * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks + * on all IOs. (Note that this is all 64 bits only for now) + * + * To help platforms who may need to differenciate MMIO addresses in + * their hooks, a bitfield is reserved for use by the platform near the + * top of MMIO addresses (not PIO, those have to cope the hard way). + * + * This bit field is 12 bits and is at the top of the IO virtual + * addresses PCI_IO_INDIRECT_TOKEN_MASK. + * + * The kernel virtual space is thus: + * + * 0xD000000000000000 : vmalloc + * 0xD000080000000000 : PCI PHB IO space + * 0xD000080080000000 : ioremap + * 0xD0000fffffffffff : end of ioremap region + * + * Since the top 4 bits are reserved as the region ID, we use thus + * the next 12 bits and keep 4 bits available for the future if the + * virtual address space is ever to be extended. + * + * The direct IO mapping operations will then mask off those bits + * before doing the actual access, though that only happen when + * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that + * mechanism + */ + +#ifdef CONFIG_PPC_INDIRECT_IO +#define PCI_IO_IND_TOKEN_MASK 0x0fff000000000000ul +#define PCI_IO_IND_TOKEN_SHIFT 48 +#define PCI_FIX_ADDR(addr) \ + ((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK)) +#define PCI_GET_ADDR_TOKEN(addr) \ + (((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> \ + PCI_IO_IND_TOKEN_SHIFT) +#define PCI_SET_ADDR_TOKEN(addr, token) \ +do { \ + unsigned long __a = (unsigned long)(addr); \ + __a &= ~PCI_IO_IND_TOKEN_MASK; \ + __a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT; \ + (addr) = (void __iomem *)__a; \ +} while(0) +#else +#define PCI_FIX_ADDR(addr) (addr) +#endif + + +/* + * Non ordered and non-swapping "raw" accessors + */ + +static inline unsigned char __raw_readb(const volatile void __iomem *addr) +{ + return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr); +} +static inline unsigned short __raw_readw(const volatile void __iomem *addr) +{ + return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr); +} +static inline unsigned int __raw_readl(const volatile void __iomem *addr) +{ + return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr); +} +static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) +{ + *(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v; +} +static inline void __raw_writew(unsigned short v, volatile void __iomem *addr) +{ + *(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v; +} +static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) +{ + *(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v; +} + +#ifdef __powerpc64__ +static inline unsigned long __raw_readq(const volatile void __iomem *addr) +{ + return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr); +} +static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) +{ + *(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v; +} +#endif /* __powerpc64__ */ + +/* + * + * PCI PIO and MMIO accessors. + * + * + * On 32 bits, PIO operations have a recovery mechanism in case they trigger + * machine checks (which they occasionally do when probing non existing + * IO ports on some platforms, like PowerMac and 8xx). + * I always found it to be of dubious reliability and I am tempted to get + * rid of it one of these days. So if you think it's important to keep it, + * please voice up asap. We never had it for 64 bits and I do not intend + * to port it over + */ + +#ifdef CONFIG_PPC32 + +#define __do_in_asm(name, op) \ +static inline unsigned int name(unsigned int port) \ +{ \ + unsigned int x; \ + __asm__ __volatile__( \ + "sync\n" \ + "0:" op " %0,0,%1\n" \ + "1: twi 0,%0,0\n" \ + "2: isync\n" \ + "3: nop\n" \ + "4:\n" \ + ".section .fixup,\"ax\"\n" \ + "5: li %0,-1\n" \ + " b 4b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 0b,5b\n" \ + " .long 1b,5b\n" \ + " .long 2b,5b\n" \ + " .long 3b,5b\n" \ + ".previous" \ + : "=&r" (x) \ + : "r" (port + _IO_BASE) \ + : "memory"); \ + return x; \ +} + +#define __do_out_asm(name, op) \ +static inline void name(unsigned int val, unsigned int port) \ +{ \ + __asm__ __volatile__( \ + "sync\n" \ + "0:" op " %0,0,%1\n" \ + "1: sync\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 0b,2b\n" \ + " .long 1b,2b\n" \ + ".previous" \ + : : "r" (val), "r" (port + _IO_BASE) \ + : "memory"); \ +} + +__do_in_asm(_rec_inb, "lbzx") +__do_in_asm(_rec_inw, "lhbrx") +__do_in_asm(_rec_inl, "lwbrx") +__do_out_asm(_rec_outb, "stbx") +__do_out_asm(_rec_outw, "sthbrx") +__do_out_asm(_rec_outl, "stwbrx") + +#endif /* CONFIG_PPC32 */ + +/* The "__do_*" operations below provide the actual "base" implementation + * for each of the defined acccessor. Some of them use the out_* functions + * directly, some of them still use EEH, though we might change that in the + * future. Those macros below provide the necessary argument swapping and + * handling of the IO base for PIO. + * + * They are themselves used by the macros that define the actual accessors + * and can be used by the hooks if any. + * + * Note that PIO operations are always defined in terms of their corresonding + * MMIO operations. That allows platforms like iSeries who want to modify the + * behaviour of both to only hook on the MMIO version and get both. It's also + * possible to hook directly at the toplevel PIO operation if they have to + * be handled differently + */ +#define __do_writeb(val, addr) out_8(PCI_FIX_ADDR(addr), val) +#define __do_writew(val, addr) out_le16(PCI_FIX_ADDR(addr), val) +#define __do_writel(val, addr) out_le32(PCI_FIX_ADDR(addr), val) +#define __do_writeq(val, addr) out_le64(PCI_FIX_ADDR(addr), val) +#define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val) +#define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val) +#define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val) + +#ifdef CONFIG_EEH +#define __do_readb(addr) eeh_readb(PCI_FIX_ADDR(addr)) +#define __do_readw(addr) eeh_readw(PCI_FIX_ADDR(addr)) +#define __do_readl(addr) eeh_readl(PCI_FIX_ADDR(addr)) +#define __do_readq(addr) eeh_readq(PCI_FIX_ADDR(addr)) +#define __do_readw_be(addr) eeh_readw_be(PCI_FIX_ADDR(addr)) +#define __do_readl_be(addr) eeh_readl_be(PCI_FIX_ADDR(addr)) +#define __do_readq_be(addr) eeh_readq_be(PCI_FIX_ADDR(addr)) +#else /* CONFIG_EEH */ +#define __do_readb(addr) in_8(PCI_FIX_ADDR(addr)) +#define __do_readw(addr) in_le16(PCI_FIX_ADDR(addr)) +#define __do_readl(addr) in_le32(PCI_FIX_ADDR(addr)) +#define __do_readq(addr) in_le64(PCI_FIX_ADDR(addr)) +#define __do_readw_be(addr) in_be16(PCI_FIX_ADDR(addr)) +#define __do_readl_be(addr) in_be32(PCI_FIX_ADDR(addr)) +#define __do_readq_be(addr) in_be64(PCI_FIX_ADDR(addr)) +#endif /* !defined(CONFIG_EEH) */ + +#ifdef CONFIG_PPC32 +#define __do_outb(val, port) _rec_outb(val, port) +#define __do_outw(val, port) _rec_outw(val, port) +#define __do_outl(val, port) _rec_outl(val, port) +#define __do_inb(port) _rec_inb(port) +#define __do_inw(port) _rec_inw(port) +#define __do_inl(port) _rec_inl(port) +#else /* CONFIG_PPC32 */ +#define __do_outb(val, port) writeb(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_outw(val, port) writew(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_outl(val, port) writel(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port); +#define __do_inw(port) readw((PCI_IO_ADDR)_IO_BASE + port); +#define __do_inl(port) readl((PCI_IO_ADDR)_IO_BASE + port); +#endif /* !CONFIG_PPC32 */ + +#ifdef CONFIG_EEH +#define __do_readsb(a, b, n) eeh_readsb(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsw(a, b, n) eeh_readsw(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsl(a, b, n) eeh_readsl(PCI_FIX_ADDR(a), (b), (n)) +#else /* CONFIG_EEH */ +#define __do_readsb(a, b, n) _insb(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsw(a, b, n) _insw(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsl(a, b, n) _insl(PCI_FIX_ADDR(a), (b), (n)) +#endif /* !CONFIG_EEH */ +#define __do_writesb(a, b, n) _outsb(PCI_FIX_ADDR(a),(b),(n)) +#define __do_writesw(a, b, n) _outsw(PCI_FIX_ADDR(a),(b),(n)) +#define __do_writesl(a, b, n) _outsl(PCI_FIX_ADDR(a),(b),(n)) + +#define __do_insb(p, b, n) readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_insw(p, b, n) readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_insl(p, b, n) readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) +#define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) +#define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) + +#define __do_memset_io(addr, c, n) \ + _memset_io(PCI_FIX_ADDR(addr), c, n) +#define __do_memcpy_toio(dst, src, n) \ + _memcpy_toio(PCI_FIX_ADDR(dst), src, n) + +#ifdef CONFIG_EEH +#define __do_memcpy_fromio(dst, src, n) \ + eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n) +#else /* CONFIG_EEH */ +#define __do_memcpy_fromio(dst, src, n) \ + _memcpy_fromio(dst,PCI_FIX_ADDR(src),n) +#endif /* !CONFIG_EEH */ + +#ifdef CONFIG_PPC_INDIRECT_IO +#define DEF_PCI_HOOK(x) x +#else +#define DEF_PCI_HOOK(x) NULL +#endif + +/* Structure containing all the hooks */ +extern struct ppc_pci_io { + +#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) ret (*name) at; +#define DEF_PCI_AC_NORET(name, at, al, space, aa) void (*name) at; + +#include + +#undef DEF_PCI_AC_RET +#undef DEF_PCI_AC_NORET + +} ppc_pci_io; + +/* The inline wrappers */ +#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \ +static inline ret name at \ +{ \ + if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \ + return ppc_pci_io.name al; \ + return __do_##name al; \ +} + +#define DEF_PCI_AC_NORET(name, at, al, space, aa) \ +static inline void name at \ +{ \ + if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \ + ppc_pci_io.name al; \ + else \ + __do_##name al; \ +} + +#include + +#undef DEF_PCI_AC_RET +#undef DEF_PCI_AC_NORET + +/* Some drivers check for the presence of readq & writeq with + * a #ifdef, so we make them happy here. + */ +#ifdef __powerpc64__ +#define readq readq +#define writeq writeq +#endif + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +/* + * We don't do relaxed operations yet, at least not with this semantic + */ +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) +#define readq_relaxed(addr) readq(addr) + +#ifdef CONFIG_PPC32 +#define mmiowb() +#else +/* + * Enforce synchronisation of stores vs. spin_unlock + * (this does it explicitly, though our implementation of spin_unlock + * does it implicitely too) + */ +static inline void mmiowb(void) +{ + unsigned long tmp; + + __asm__ __volatile__("sync; li %0,0; stb %0,%1(13)" + : "=&r" (tmp) : "i" (offsetof(struct paca_struct, io_sync)) + : "memory"); +} +#endif /* !CONFIG_PPC32 */ + +static inline void iosync(void) +{ + __asm__ __volatile__ ("sync" : : : "memory"); +} + +/* Enforce in-order execution of data I/O. + * No distinction between read/write on PPC; use eieio for all three. + * Those are fairly week though. They don't provide a barrier between + * MMIO and cacheable storage nor do they provide a barrier vs. locks, + * they only provide barriers between 2 __raw MMIO operations and + * possibly break write combining. + */ +#define iobarrier_rw() eieio() +#define iobarrier_r() eieio() +#define iobarrier_w() eieio() + + +/* + * output pause versions need a delay at least for the + * w83c105 ide controller in a p610. + */ +#define inb_p(port) inb(port) +#define outb_p(val, port) (udelay(1), outb((val), (port))) +#define inw_p(port) inw(port) +#define outw_p(val, port) (udelay(1), outw((val), (port))) +#define inl_p(port) inl(port) +#define outl_p(val, port) (udelay(1), outl((val), (port))) + + +#define IO_SPACE_LIMIT ~(0UL) + + +/** + * ioremap - map bus memory into CPU space + * @address: bus address of the memory + * @size: size of the resource to map + * + * ioremap performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + * + * We provide a few variations of it: + * + * * ioremap is the standard one and provides non-cacheable guarded mappings + * and can be hooked by the platform via ppc_md + * + * * ioremap_flags allows to specify the page flags as an argument and can + * also be hooked by the platform via ppc_md. ioremap_prot is the exact + * same thing as ioremap_flags. + * + * * ioremap_nocache is identical to ioremap + * + * * iounmap undoes such a mapping and can be hooked + * + * * __ioremap_at (and the pending __iounmap_at) are low level functions to + * create hand-made mappings for use only by the PCI code and cannot + * currently be hooked. Must be page aligned. + * + * * __ioremap is the low level implementation used by ioremap and + * ioremap_flags and cannot be hooked (but can be used by a hook on one + * of the previous ones) + * + * * __iounmap, is the low level implementation used by iounmap and cannot + * be hooked (but can be used by a hook on iounmap) + * + */ +extern void __iomem *ioremap(phys_addr_t address, unsigned long size); +extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size, + unsigned long flags); +#define ioremap_nocache(addr, size) ioremap((addr), (size)) +#define ioremap_prot(addr, size, prot) ioremap_flags((addr), (size), (prot)) + +extern void iounmap(volatile void __iomem *addr); + +extern void __iomem *__ioremap(phys_addr_t, unsigned long size, + unsigned long flags); +extern void __iounmap(volatile void __iomem *addr); + +extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea, + unsigned long size, unsigned long flags); +extern void __iounmap_at(void *ea, unsigned long size); + +/* + * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation + * which needs some additional definitions here. They basically allow PIO + * space overall to be 1GB. This will work as long as we never try to use + * iomap to map MMIO below 1GB which should be fine on ppc64 + */ +#define HAVE_ARCH_PIO_SIZE 1 +#define PIO_OFFSET 0x00000000UL +#define PIO_MASK (FULL_IO_SIZE - 1) +#define PIO_RESERVED (FULL_IO_SIZE) + +#define mmio_read16be(addr) readw_be(addr) +#define mmio_read32be(addr) readl_be(addr) +#define mmio_write16be(val, addr) writew_be(val, addr) +#define mmio_write32be(val, addr) writel_be(val, addr) +#define mmio_insb(addr, dst, count) readsb(addr, dst, count) +#define mmio_insw(addr, dst, count) readsw(addr, dst, count) +#define mmio_insl(addr, dst, count) readsl(addr, dst, count) +#define mmio_outsb(addr, src, count) writesb(addr, src, count) +#define mmio_outsw(addr, src, count) writesw(addr, src, count) +#define mmio_outsl(addr, src, count) writesl(addr, src, count) + +/** + * virt_to_phys - map virtual addresses to physical + * @address: address to remap + * + * The returned physical address is the physical (CPU) mapping for + * the memory address given. It is only valid to use this function on + * addresses directly mapped or allocated via kmalloc. + * + * This function does not give bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline unsigned long virt_to_phys(volatile void * address) +{ + return __pa((unsigned long)address); +} + +/** + * phys_to_virt - map physical address to virtual + * @address: address to remap + * + * The returned virtual address is a current CPU mapping for + * the memory address given. It is only valid to use this function on + * addresses that have a kernel mapping + * + * This function does not handle bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline void * phys_to_virt(unsigned long address) +{ + return (void *)__va(address); +} + +/* + * Change "struct page" to physical address. + */ +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +/* We do NOT want virtual merging, it would put too much pressure on + * our iommu allocator. Instead, we want drivers to be smart enough + * to coalesce sglists that happen to have been mapped in a contiguous + * way by the iommu + */ +#define BIO_VMERGE_BOUNDARY 0 + +/* + * 32 bits still uses virt_to_bus() for it's implementation of DMA + * mappings se we have to keep it defined here. We also have some old + * drivers (shame shame shame) that use bus_to_virt() and haven't been + * fixed yet so I need to define it here. + */ +#ifdef CONFIG_PPC32 + +static inline unsigned long virt_to_bus(volatile void * address) +{ + if (address == NULL) + return 0; + return __pa(address) + PCI_DRAM_OFFSET; +} + +static inline void * bus_to_virt(unsigned long address) +{ + if (address == 0) + return NULL; + return __va(address - PCI_DRAM_OFFSET); +} + +#define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET) + +#endif /* CONFIG_PPC32 */ + +/* access ports */ +#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v)) +#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v)) + +#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v)) +#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v)) + +#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v)) +#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v)) + +/* Clear and set bits in one shot. These macros can be used to clear and + * set multiple bits in a register using a single read-modify-write. These + * macros can also be used to set a multiple-bit bit pattern using a mask, + * by specifying the mask in the 'clear' parameter and the new bit pattern + * in the 'set' parameter. + */ + +#define clrsetbits(type, addr, clear, set) \ + out_##type((addr), (in_##type(addr) & ~(clear)) | (set)) + +#ifdef __powerpc64__ +#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set) +#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set) +#endif + +#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set) +#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) + +#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) +#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) + +#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) + +void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset, + size_t size, unsigned long flags); + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_IO_H */ diff --git a/arch/powerpc/include/asm/ioctl.h b/arch/powerpc/include/asm/ioctl.h new file mode 100644 index 000000000000..57d68304218b --- /dev/null +++ b/arch/powerpc/include/asm/ioctl.h @@ -0,0 +1,13 @@ +#ifndef _ASM_POWERPC_IOCTL_H +#define _ASM_POWERPC_IOCTL_H + +#define _IOC_SIZEBITS 13 +#define _IOC_DIRBITS 3 + +#define _IOC_NONE 1U +#define _IOC_READ 2U +#define _IOC_WRITE 4U + +#include + +#endif /* _ASM_POWERPC_IOCTL_H */ diff --git a/arch/powerpc/include/asm/ioctls.h b/arch/powerpc/include/asm/ioctls.h new file mode 100644 index 000000000000..279a6229584b --- /dev/null +++ b/arch/powerpc/include/asm/ioctls.h @@ -0,0 +1,110 @@ +#ifndef _ASM_POWERPC_IOCTLS_H +#define _ASM_POWERPC_IOCTLS_H + +#include + +#define FIOCLEX _IO('f', 1) +#define FIONCLEX _IO('f', 2) +#define FIOASYNC _IOW('f', 125, int) +#define FIONBIO _IOW('f', 126, int) +#define FIONREAD _IOR('f', 127, int) +#define TIOCINQ FIONREAD +#define FIOQSIZE _IOR('f', 128, loff_t) + +#define TIOCGETP _IOR('t', 8, struct sgttyb) +#define TIOCSETP _IOW('t', 9, struct sgttyb) +#define TIOCSETN _IOW('t', 10, struct sgttyb) /* TIOCSETP wo flush */ + +#define TIOCSETC _IOW('t', 17, struct tchars) +#define TIOCGETC _IOR('t', 18, struct tchars) +#define TCGETS _IOR('t', 19, struct termios) +#define TCSETS _IOW('t', 20, struct termios) +#define TCSETSW _IOW('t', 21, struct termios) +#define TCSETSF _IOW('t', 22, struct termios) + +#define TCGETA _IOR('t', 23, struct termio) +#define TCSETA _IOW('t', 24, struct termio) +#define TCSETAW _IOW('t', 25, struct termio) +#define TCSETAF _IOW('t', 28, struct termio) + +#define TCSBRK _IO('t', 29) +#define TCXONC _IO('t', 30) +#define TCFLSH _IO('t', 31) + +#define TIOCSWINSZ _IOW('t', 103, struct winsize) +#define TIOCGWINSZ _IOR('t', 104, struct winsize) +#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ +#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ +#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ + +#define TIOCGLTC _IOR('t', 116, struct ltchars) +#define TIOCSLTC _IOW('t', 117, struct ltchars) +#define TIOCSPGRP _IOW('t', 118, int) +#define TIOCGPGRP _IOR('t', 119, int) + +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E + +#define TIOCSTI 0x5412 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +# define TIOCM_LE 0x001 +# define TIOCM_DTR 0x002 +# define TIOCM_RTS 0x004 +# define TIOCM_ST 0x008 +# define TIOCM_SR 0x010 +# define TIOCM_CTS 0x020 +# define TIOCM_CAR 0x040 +# define TIOCM_RNG 0x080 +# define TIOCM_DSR 0x100 +# define TIOCM_CD TIOCM_CAR +# define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +# define TIOCPKT_DATA 0 +# define TIOCPKT_FLUSHREAD 1 +# define TIOCPKT_FLUSHWRITE 2 +# define TIOCPKT_STOP 4 +# define TIOCPKT_START 8 +# define TIOCPKT_NOSTOP 16 +# define TIOCPKT_DOSTOP 32 + + +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ + /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ +# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ + +#endif /* _ASM_POWERPC_IOCTLS_H */ diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h new file mode 100644 index 000000000000..51ecfef8d843 --- /dev/null +++ b/arch/powerpc/include/asm/iommu.h @@ -0,0 +1,131 @@ +/* + * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation + * Rewrite, cleanup: + * Copyright (C) 2004 Olof Johansson , IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_IOMMU_H +#define _ASM_IOMMU_H +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include +#include +#include + +#define IOMMU_PAGE_SHIFT 12 +#define IOMMU_PAGE_SIZE (ASM_CONST(1) << IOMMU_PAGE_SHIFT) +#define IOMMU_PAGE_MASK (~((1 << IOMMU_PAGE_SHIFT) - 1)) +#define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE) + +/* Boot time flags */ +extern int iommu_is_off; +extern int iommu_force_on; + +/* Pure 2^n version of get_order */ +static __inline__ __attribute_const__ int get_iommu_order(unsigned long size) +{ + return __ilog2((size - 1) >> IOMMU_PAGE_SHIFT) + 1; +} + + +/* + * IOMAP_MAX_ORDER defines the largest contiguous block + * of dma space we can get. IOMAP_MAX_ORDER = 13 + * allows up to 2**12 pages (4096 * 4096) = 16 MB + */ +#define IOMAP_MAX_ORDER 13 + +struct iommu_table { + unsigned long it_busno; /* Bus number this table belongs to */ + unsigned long it_size; /* Size of iommu table in entries */ + unsigned long it_offset; /* Offset into global table */ + unsigned long it_base; /* mapped address of tce table */ + unsigned long it_index; /* which iommu table this is */ + unsigned long it_type; /* type: PCI or Virtual Bus */ + unsigned long it_blocksize; /* Entries in each block (cacheline) */ + unsigned long it_hint; /* Hint for next alloc */ + unsigned long it_largehint; /* Hint for large allocs */ + unsigned long it_halfpoint; /* Breaking point for small/large allocs */ + spinlock_t it_lock; /* Protects it_map */ + unsigned long *it_map; /* A simple allocation bitmap for now */ +}; + +struct scatterlist; + +/* Frees table for an individual device node */ +extern void iommu_free_table(struct iommu_table *tbl, const char *node_name); + +/* Initializes an iommu_table based in values set in the passed-in + * structure + */ +extern struct iommu_table *iommu_init_table(struct iommu_table * tbl, + int nid); + +extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl, + struct scatterlist *sglist, int nelems, + unsigned long mask, enum dma_data_direction direction, + struct dma_attrs *attrs); +extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, + int nelems, enum dma_data_direction direction, + struct dma_attrs *attrs); + +extern void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl, + size_t size, dma_addr_t *dma_handle, + unsigned long mask, gfp_t flag, int node); +extern void iommu_free_coherent(struct iommu_table *tbl, size_t size, + void *vaddr, dma_addr_t dma_handle); +extern dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl, + void *vaddr, size_t size, unsigned long mask, + enum dma_data_direction direction, + struct dma_attrs *attrs); +extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs); + +extern void iommu_init_early_pSeries(void); +extern void iommu_init_early_iSeries(void); +extern void iommu_init_early_dart(void); +extern void iommu_init_early_pasemi(void); + +#ifdef CONFIG_PCI +extern void pci_iommu_init(void); +extern void pci_direct_iommu_init(void); +#else +static inline void pci_iommu_init(void) { } +#endif + +extern void alloc_dart_table(void); +#if defined(CONFIG_PPC64) && defined(CONFIG_PM) +static inline void iommu_save(void) +{ + if (ppc_md.iommu_save) + ppc_md.iommu_save(); +} + +static inline void iommu_restore(void) +{ + if (ppc_md.iommu_restore) + ppc_md.iommu_restore(); +} +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_IOMMU_H */ diff --git a/arch/powerpc/include/asm/ipcbuf.h b/arch/powerpc/include/asm/ipcbuf.h new file mode 100644 index 000000000000..2c3e1d94db1d --- /dev/null +++ b/arch/powerpc/include/asm/ipcbuf.h @@ -0,0 +1,34 @@ +#ifndef _ASM_POWERPC_IPCBUF_H +#define _ASM_POWERPC_IPCBUF_H + +/* + * The ipc64_perm structure for the powerpc is identical to + * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the + * kernel. Note extra padding because this structure is passed back + * and forth between kernel and user space. Pad space is left for: + * - 1 32-bit value to fill up for 8-byte alignment + * - 2 miscellaneous 64-bit values + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid_t uid; + __kernel_gid_t gid; + __kernel_uid_t cuid; + __kernel_gid_t cgid; + __kernel_mode_t mode; + unsigned int seq; + unsigned int __pad1; + unsigned long long __unused1; + unsigned long long __unused2; +}; + +#endif /* _ASM_POWERPC_IPCBUF_H */ diff --git a/arch/powerpc/include/asm/ipic.h b/arch/powerpc/include/asm/ipic.h new file mode 100644 index 000000000000..4cf35531c0ef --- /dev/null +++ b/arch/powerpc/include/asm/ipic.h @@ -0,0 +1,91 @@ +/* + * IPIC external definitions and structure. + * + * Maintainer: Kumar Gala + * + * Copyright 2005 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifdef __KERNEL__ +#ifndef __ASM_IPIC_H__ +#define __ASM_IPIC_H__ + +#include + +/* Flags when we init the IPIC */ +#define IPIC_SPREADMODE_GRP_A 0x00000001 +#define IPIC_SPREADMODE_GRP_B 0x00000002 +#define IPIC_SPREADMODE_GRP_C 0x00000004 +#define IPIC_SPREADMODE_GRP_D 0x00000008 +#define IPIC_SPREADMODE_MIX_A 0x00000010 +#define IPIC_SPREADMODE_MIX_B 0x00000020 +#define IPIC_DISABLE_MCP_OUT 0x00000040 +#define IPIC_IRQ0_MCP 0x00000080 + +/* IPIC registers offsets */ +#define IPIC_SICFR 0x00 /* System Global Interrupt Configuration Register */ +#define IPIC_SIVCR 0x04 /* System Global Interrupt Vector Register */ +#define IPIC_SIPNR_H 0x08 /* System Internal Interrupt Pending Register (HIGH) */ +#define IPIC_SIPNR_L 0x0C /* System Internal Interrupt Pending Register (LOW) */ +#define IPIC_SIPRR_A 0x10 /* System Internal Interrupt group A Priority Register */ +#define IPIC_SIPRR_B 0x14 /* System Internal Interrupt group B Priority Register */ +#define IPIC_SIPRR_C 0x18 /* System Internal Interrupt group C Priority Register */ +#define IPIC_SIPRR_D 0x1C /* System Internal Interrupt group D Priority Register */ +#define IPIC_SIMSR_H 0x20 /* System Internal Interrupt Mask Register (HIGH) */ +#define IPIC_SIMSR_L 0x24 /* System Internal Interrupt Mask Register (LOW) */ +#define IPIC_SICNR 0x28 /* System Internal Interrupt Control Register */ +#define IPIC_SEPNR 0x2C /* System External Interrupt Pending Register */ +#define IPIC_SMPRR_A 0x30 /* System Mixed Interrupt group A Priority Register */ +#define IPIC_SMPRR_B 0x34 /* System Mixed Interrupt group B Priority Register */ +#define IPIC_SEMSR 0x38 /* System External Interrupt Mask Register */ +#define IPIC_SECNR 0x3C /* System External Interrupt Control Register */ +#define IPIC_SERSR 0x40 /* System Error Status Register */ +#define IPIC_SERMR 0x44 /* System Error Mask Register */ +#define IPIC_SERCR 0x48 /* System Error Control Register */ +#define IPIC_SIFCR_H 0x50 /* System Internal Interrupt Force Register (HIGH) */ +#define IPIC_SIFCR_L 0x54 /* System Internal Interrupt Force Register (LOW) */ +#define IPIC_SEFCR 0x58 /* System External Interrupt Force Register */ +#define IPIC_SERFR 0x5C /* System Error Force Register */ +#define IPIC_SCVCR 0x60 /* System Critical Interrupt Vector Register */ +#define IPIC_SMVCR 0x64 /* System Management Interrupt Vector Register */ + +enum ipic_prio_grp { + IPIC_INT_GRP_A = IPIC_SIPRR_A, + IPIC_INT_GRP_D = IPIC_SIPRR_D, + IPIC_MIX_GRP_A = IPIC_SMPRR_A, + IPIC_MIX_GRP_B = IPIC_SMPRR_B, +}; + +enum ipic_mcp_irq { + IPIC_MCP_IRQ0 = 0, + IPIC_MCP_WDT = 1, + IPIC_MCP_SBA = 2, + IPIC_MCP_PCI1 = 5, + IPIC_MCP_PCI2 = 6, + IPIC_MCP_MU = 7, +}; + +extern int ipic_set_priority(unsigned int irq, unsigned int priority); +extern void ipic_set_highest_priority(unsigned int irq); +extern void ipic_set_default_priority(void); +extern void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq); +extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq); +extern u32 ipic_get_mcp_status(void); +extern void ipic_clear_mcp_status(u32 mask); + +#ifdef CONFIG_PPC_MERGE +extern struct ipic * ipic_init(struct device_node *node, unsigned int flags); +extern unsigned int ipic_get_irq(void); +#else +extern void ipic_init(phys_addr_t phys_addr, unsigned int flags, + unsigned int irq_offset, + unsigned char *senses, unsigned int senses_count); +extern int ipic_get_irq(void); +#endif + +#endif /* __ASM_IPIC_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h new file mode 100644 index 000000000000..1ef8e304e0ea --- /dev/null +++ b/arch/powerpc/include/asm/irq.h @@ -0,0 +1,654 @@ +#ifdef __KERNEL__ +#ifndef _ASM_POWERPC_IRQ_H +#define _ASM_POWERPC_IRQ_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include + +#include +#include + + +#define get_irq_desc(irq) (&irq_desc[(irq)]) + +/* Define a way to iterate across irqs. */ +#define for_each_irq(i) \ + for ((i) = 0; (i) < NR_IRQS; ++(i)) + +extern atomic_t ppc_n_lost_interrupts; + +#ifdef CONFIG_PPC_MERGE + +/* This number is used when no interrupt has been assigned */ +#define NO_IRQ (0) + +/* This is a special irq number to return from get_irq() to tell that + * no interrupt happened _and_ ignore it (don't count it as bad). Some + * platforms like iSeries rely on that. + */ +#define NO_IRQ_IGNORE ((unsigned int)-1) + +/* Total number of virq in the platform (make it a CONFIG_* option ? */ +#define NR_IRQS 512 + +/* Number of irqs reserved for the legacy controller */ +#define NUM_ISA_INTERRUPTS 16 + +/* This type is the placeholder for a hardware interrupt number. It has to + * be big enough to enclose whatever representation is used by a given + * platform. + */ +typedef unsigned long irq_hw_number_t; + +/* Interrupt controller "host" data structure. This could be defined as a + * irq domain controller. That is, it handles the mapping between hardware + * and virtual interrupt numbers for a given interrupt domain. The host + * structure is generally created by the PIC code for a given PIC instance + * (though a host can cover more than one PIC if they have a flat number + * model). It's the host callbacks that are responsible for setting the + * irq_chip on a given irq_desc after it's been mapped. + * + * The host code and data structures are fairly agnostic to the fact that + * we use an open firmware device-tree. We do have references to struct + * device_node in two places: in irq_find_host() to find the host matching + * a given interrupt controller node, and of course as an argument to its + * counterpart host->ops->match() callback. However, those are treated as + * generic pointers by the core and the fact that it's actually a device-node + * pointer is purely a convention between callers and implementation. This + * code could thus be used on other architectures by replacing those two + * by some sort of arch-specific void * "token" used to identify interrupt + * controllers. + */ +struct irq_host; +struct radix_tree_root; + +/* Functions below are provided by the host and called whenever a new mapping + * is created or an old mapping is disposed. The host can then proceed to + * whatever internal data structures management is required. It also needs + * to setup the irq_desc when returning from map(). + */ +struct irq_host_ops { + /* Match an interrupt controller device node to a host, returns + * 1 on a match + */ + int (*match)(struct irq_host *h, struct device_node *node); + + /* Create or update a mapping between a virtual irq number and a hw + * irq number. This is called only once for a given mapping. + */ + int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw); + + /* Dispose of such a mapping */ + void (*unmap)(struct irq_host *h, unsigned int virq); + + /* Update of such a mapping */ + void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw); + + /* Translate device-tree interrupt specifier from raw format coming + * from the firmware to a irq_hw_number_t (interrupt line number) and + * type (sense) that can be passed to set_irq_type(). In the absence + * of this callback, irq_create_of_mapping() and irq_of_parse_and_map() + * will return the hw number in the first cell and IRQ_TYPE_NONE for + * the type (which amount to keeping whatever default value the + * interrupt controller has for that line) + */ + int (*xlate)(struct irq_host *h, struct device_node *ctrler, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_type); +}; + +struct irq_host { + struct list_head link; + + /* type of reverse mapping technique */ + unsigned int revmap_type; +#define IRQ_HOST_MAP_LEGACY 0 /* legacy 8259, gets irqs 1..15 */ +#define IRQ_HOST_MAP_NOMAP 1 /* no fast reverse mapping */ +#define IRQ_HOST_MAP_LINEAR 2 /* linear map of interrupts */ +#define IRQ_HOST_MAP_TREE 3 /* radix tree */ + union { + struct { + unsigned int size; + unsigned int *revmap; + } linear; + struct radix_tree_root tree; + } revmap_data; + struct irq_host_ops *ops; + void *host_data; + irq_hw_number_t inval_irq; + + /* Optional device node pointer */ + struct device_node *of_node; +}; + +/* The main irq map itself is an array of NR_IRQ entries containing the + * associate host and irq number. An entry with a host of NULL is free. + * An entry can be allocated if it's free, the allocator always then sets + * hwirq first to the host's invalid irq number and then fills ops. + */ +struct irq_map_entry { + irq_hw_number_t hwirq; + struct irq_host *host; +}; + +extern struct irq_map_entry irq_map[NR_IRQS]; + +extern irq_hw_number_t virq_to_hw(unsigned int virq); + +/** + * irq_alloc_host - Allocate a new irq_host data structure + * @of_node: optional device-tree node of the interrupt controller + * @revmap_type: type of reverse mapping to use + * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map + * @ops: map/unmap host callbacks + * @inval_irq: provide a hw number in that host space that is always invalid + * + * Allocates and initialize and irq_host structure. Note that in the case of + * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns + * for all legacy interrupts except 0 (which is always the invalid irq for + * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by + * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated + * later during boot automatically (the reverse mapping will use the slow path + * until that happens). + */ +extern struct irq_host *irq_alloc_host(struct device_node *of_node, + unsigned int revmap_type, + unsigned int revmap_arg, + struct irq_host_ops *ops, + irq_hw_number_t inval_irq); + + +/** + * irq_find_host - Locates a host for a given device node + * @node: device-tree node of the interrupt controller + */ +extern struct irq_host *irq_find_host(struct device_node *node); + + +/** + * irq_set_default_host - Set a "default" host + * @host: default host pointer + * + * For convenience, it's possible to set a "default" host that will be used + * whenever NULL is passed to irq_create_mapping(). It makes life easier for + * platforms that want to manipulate a few hard coded interrupt numbers that + * aren't properly represented in the device-tree. + */ +extern void irq_set_default_host(struct irq_host *host); + + +/** + * irq_set_virq_count - Set the maximum number of virt irqs + * @count: number of linux virtual irqs, capped with NR_IRQS + * + * This is mainly for use by platforms like iSeries who want to program + * the virtual irq number in the controller to avoid the reverse mapping + */ +extern void irq_set_virq_count(unsigned int count); + + +/** + * irq_create_mapping - Map a hardware interrupt into linux virq space + * @host: host owning this hardware interrupt or NULL for default host + * @hwirq: hardware irq number in that host space + * + * Only one mapping per hardware interrupt is permitted. Returns a linux + * virq number. + * If the sense/trigger is to be specified, set_irq_type() should be called + * on the number returned from that call. + */ +extern unsigned int irq_create_mapping(struct irq_host *host, + irq_hw_number_t hwirq); + + +/** + * irq_dispose_mapping - Unmap an interrupt + * @virq: linux virq number of the interrupt to unmap + */ +extern void irq_dispose_mapping(unsigned int virq); + +/** + * irq_find_mapping - Find a linux virq from an hw irq number. + * @host: host owning this hardware interrupt + * @hwirq: hardware irq number in that host space + * + * This is a slow path, for use by generic code. It's expected that an + * irq controller implementation directly calls the appropriate low level + * mapping function. + */ +extern unsigned int irq_find_mapping(struct irq_host *host, + irq_hw_number_t hwirq); + +/** + * irq_create_direct_mapping - Allocate a virq for direct mapping + * @host: host to allocate the virq for or NULL for default host + * + * This routine is used for irq controllers which can choose the hardware + * interrupt numbers they generate. In such a case it's simplest to use + * the linux virq as the hardware interrupt number. + */ +extern unsigned int irq_create_direct_mapping(struct irq_host *host); + +/** + * irq_radix_revmap - Find a linux virq from a hw irq number. + * @host: host owning this hardware interrupt + * @hwirq: hardware irq number in that host space + * + * This is a fast path, for use by irq controller code that uses radix tree + * revmaps + */ +extern unsigned int irq_radix_revmap(struct irq_host *host, + irq_hw_number_t hwirq); + +/** + * irq_linear_revmap - Find a linux virq from a hw irq number. + * @host: host owning this hardware interrupt + * @hwirq: hardware irq number in that host space + * + * This is a fast path, for use by irq controller code that uses linear + * revmaps. It does fallback to the slow path if the revmap doesn't exist + * yet and will create the revmap entry with appropriate locking + */ + +extern unsigned int irq_linear_revmap(struct irq_host *host, + irq_hw_number_t hwirq); + + + +/** + * irq_alloc_virt - Allocate virtual irq numbers + * @host: host owning these new virtual irqs + * @count: number of consecutive numbers to allocate + * @hint: pass a hint number, the allocator will try to use a 1:1 mapping + * + * This is a low level function that is used internally by irq_create_mapping() + * and that can be used by some irq controllers implementations for things + * like allocating ranges of numbers for MSIs. The revmaps are left untouched. + */ +extern unsigned int irq_alloc_virt(struct irq_host *host, + unsigned int count, + unsigned int hint); + +/** + * irq_free_virt - Free virtual irq numbers + * @virq: virtual irq number of the first interrupt to free + * @count: number of interrupts to free + * + * This function is the opposite of irq_alloc_virt. It will not clear reverse + * maps, this should be done previously by unmap'ing the interrupt. In fact, + * all interrupts covered by the range being freed should have been unmapped + * prior to calling this. + */ +extern void irq_free_virt(unsigned int virq, unsigned int count); + + +/* -- OF helpers -- */ + +/* irq_create_of_mapping - Map a hardware interrupt into linux virq space + * @controller: Device node of the interrupt controller + * @inspec: Interrupt specifier from the device-tree + * @intsize: Size of the interrupt specifier from the device-tree + * + * This function is identical to irq_create_mapping except that it takes + * as input informations straight from the device-tree (typically the results + * of the of_irq_map_*() functions. + */ +extern unsigned int irq_create_of_mapping(struct device_node *controller, + u32 *intspec, unsigned int intsize); + + +/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space + * @device: Device node of the device whose interrupt is to be mapped + * @index: Index of the interrupt to map + * + * This function is a wrapper that chains of_irq_map_one() and + * irq_create_of_mapping() to make things easier to callers + */ +extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index); + +/* -- End OF helpers -- */ + +/** + * irq_early_init - Init irq remapping subsystem + */ +extern void irq_early_init(void); + +static __inline__ int irq_canonicalize(int irq) +{ + return irq; +} + + +#else /* CONFIG_PPC_MERGE */ + +/* This number is used when no interrupt has been assigned */ +#define NO_IRQ (-1) +#define NO_IRQ_IGNORE (-2) + + +/* + * These constants are used for passing information about interrupt + * signal polarity and level/edge sensing to the low-level PIC chip + * drivers. + */ +#define IRQ_SENSE_MASK 0x1 +#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */ +#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */ + +#define IRQ_POLARITY_MASK 0x2 +#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */ +#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */ + + +#if defined(CONFIG_40x) +#include + +#ifndef NR_BOARD_IRQS +#define NR_BOARD_IRQS 0 +#endif + +#ifndef UIC_WIDTH /* Number of interrupts per device */ +#define UIC_WIDTH 32 +#endif + +#ifndef NR_UICS /* number of UIC devices */ +#define NR_UICS 1 +#endif + +#if defined (CONFIG_403) +/* + * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has + * 32 possible interrupts, a majority of which are not implemented on + * all cores. There are six configurable, external interrupt pins and + * there are eight internal interrupts for the on-chip serial port + * (SPU), DMA controller, and JTAG controller. + * + */ + +#define NR_AIC_IRQS 32 +#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS) + +#elif !defined (CONFIG_403) + +/* + * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32 + * possible interrupts as well. There are seven, configurable external + * interrupt pins and there are 17 internal interrupts for the on-chip + * serial port, DMA controller, on-chip Ethernet controller, PCI, etc. + * + */ + + +#define NR_UIC_IRQS UIC_WIDTH +#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) +#endif + +#elif defined(CONFIG_44x) +#include + +#define NR_UIC_IRQS 32 +#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) + +#elif defined(CONFIG_8xx) + +/* Now include the board configuration specific associations. +*/ +#include + +/* The MPC8xx cores have 16 possible interrupts. There are eight + * possible level sensitive interrupts assigned and generated internally + * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer. + * There are eight external interrupts (IRQs) that can be configured + * as either level or edge sensitive. + * + * On some implementations, there is also the possibility of an 8259 + * through the PCI and PCI-ISA bridges. + * + * We are "flattening" the interrupt vectors of the cascaded CPM + * and 8259 interrupt controllers so that we can uniquely identify + * any interrupt source with a single integer. + */ +#define NR_SIU_INTS 16 +#define NR_CPM_INTS 32 +#ifndef NR_8259_INTS +#define NR_8259_INTS 0 +#endif + +#define SIU_IRQ_OFFSET 0 +#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS) +#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS) + +#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS) + +/* These values must be zero-based and map 1:1 with the SIU configuration. + * They are used throughout the 8xx I/O subsystem to generate + * interrupt masks, flags, and other control patterns. This is why the + * current kernel assumption of the 8259 as the base controller is such + * a pain in the butt. + */ +#define SIU_IRQ0 (0) /* Highest priority */ +#define SIU_LEVEL0 (1) +#define SIU_IRQ1 (2) +#define SIU_LEVEL1 (3) +#define SIU_IRQ2 (4) +#define SIU_LEVEL2 (5) +#define SIU_IRQ3 (6) +#define SIU_LEVEL3 (7) +#define SIU_IRQ4 (8) +#define SIU_LEVEL4 (9) +#define SIU_IRQ5 (10) +#define SIU_LEVEL5 (11) +#define SIU_IRQ6 (12) +#define SIU_LEVEL6 (13) +#define SIU_IRQ7 (14) +#define SIU_LEVEL7 (15) + +#define MPC8xx_INT_FEC1 SIU_LEVEL1 +#define MPC8xx_INT_FEC2 SIU_LEVEL3 + +#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1) +#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2) +#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3) +#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4) +#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1) +#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2) + +/* The internal interrupts we can configure as we see fit. + * My personal preference is CPM at level 2, which puts it above the + * MBX PCI/ISA/IDE interrupts. + */ +#ifndef PIT_INTERRUPT +#define PIT_INTERRUPT SIU_LEVEL0 +#endif +#ifndef CPM_INTERRUPT +#define CPM_INTERRUPT SIU_LEVEL2 +#endif +#ifndef PCMCIA_INTERRUPT +#define PCMCIA_INTERRUPT SIU_LEVEL6 +#endif +#ifndef DEC_INTERRUPT +#define DEC_INTERRUPT SIU_LEVEL7 +#endif + +/* Some internal interrupt registers use an 8-bit mask for the interrupt + * level instead of a number. + */ +#define mk_int_int_mask(IL) (1 << (7 - (IL/2))) + +#else /* CONFIG_40x + CONFIG_8xx */ +/* + * this is the # irq's for all ppc arch's (pmac/chrp/prep) + * so it is the max of them all + */ +#define NR_IRQS 256 +#define __DO_IRQ_CANON 1 + +#ifndef CONFIG_8260 + +#define NUM_8259_INTERRUPTS 16 + +#else /* CONFIG_8260 */ + +/* The 8260 has an internal interrupt controller with a maximum of + * 64 IRQs. We will use NR_IRQs from above since it is large enough. + * Don't be confused by the 8260 documentation where they list an + * "interrupt number" and "interrupt vector". We are only interested + * in the interrupt vector. There are "reserved" holes where the + * vector number increases, but the interrupt number in the table does not. + * (Document errata updates have fixed this...make sure you have up to + * date processor documentation -- Dan). + */ + +#ifndef CPM_IRQ_OFFSET +#define CPM_IRQ_OFFSET 0 +#endif + +#define NR_CPM_INTS 64 + +#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET) +#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET) +#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET) +#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET) +#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET) +#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET) +#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET) +#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET) +#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET) +#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET) +#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET) +#define SIU_INT_USB ((uint)0x0b + CPM_IRQ_OFFSET) +#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET) +#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET) +#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET) +#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET) +#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET) +#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET) +#define SIU_INT_PCI ((uint)0x12 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET) +#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET) +#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET) +#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET) +#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET) +#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET) +#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET) +#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET) +#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET) +#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET) +#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET) +#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET) +#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET) +#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET) +#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET) +#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET) +#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET) +#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET) +#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET) +#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET) +#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET) +#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET) +#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET) +#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET) +#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET) +#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET) + +#endif /* CONFIG_8260 */ + +#endif /* Whatever way too big #ifdef */ + +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +/* pedantic: these are long because they are used with set_bit --RR */ +extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; + +/* + * Because many systems have two overlapping names spaces for + * interrupts (ISA and XICS for example), and the ISA interrupts + * have historically not been easy to renumber, we allow ISA + * interrupts to take values 0 - 15, and shift up the remaining + * interrupts by 0x10. + */ +#define NUM_ISA_INTERRUPTS 0x10 +extern int __irq_offset_value; + +static inline int irq_offset_up(int irq) +{ + return(irq + __irq_offset_value); +} + +static inline int irq_offset_down(int irq) +{ + return(irq - __irq_offset_value); +} + +static inline int irq_offset_value(void) +{ + return __irq_offset_value; +} + +#ifdef __DO_IRQ_CANON +extern int ppc_do_canonicalize_irqs; +#else +#define ppc_do_canonicalize_irqs 0 +#endif + +static __inline__ int irq_canonicalize(int irq) +{ + if (ppc_do_canonicalize_irqs && irq == 2) + irq = 9; + return irq; +} +#endif /* CONFIG_PPC_MERGE */ + +extern int distribute_irqs; + +struct irqaction; +struct pt_regs; + +#define __ARCH_HAS_DO_SOFTIRQ + +#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) +/* + * Per-cpu stacks for handling critical, debug and machine check + * level interrupts. + */ +extern struct thread_info *critirq_ctx[NR_CPUS]; +extern struct thread_info *dbgirq_ctx[NR_CPUS]; +extern struct thread_info *mcheckirq_ctx[NR_CPUS]; +extern void exc_lvl_ctx_init(void); +#else +#define exc_lvl_ctx_init() +#endif + +#ifdef CONFIG_IRQSTACKS +/* + * Per-cpu stacks for handling hard and soft interrupts. + */ +extern struct thread_info *hardirq_ctx[NR_CPUS]; +extern struct thread_info *softirq_ctx[NR_CPUS]; + +extern void irq_ctx_init(void); +extern void call_do_softirq(struct thread_info *tp); +extern int call_handle_irq(int irq, void *p1, + struct thread_info *tp, void *func); +#else +#define irq_ctx_init() + +#endif /* CONFIG_IRQSTACKS */ + +extern void do_IRQ(struct pt_regs *regs); + +#endif /* _ASM_IRQ_H */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/irq_regs.h b/arch/powerpc/include/asm/irq_regs.h new file mode 100644 index 000000000000..ba94b51a0a70 --- /dev/null +++ b/arch/powerpc/include/asm/irq_regs.h @@ -0,0 +1,2 @@ +#include + diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h new file mode 100644 index 000000000000..17ba3a881bfd --- /dev/null +++ b/arch/powerpc/include/asm/irqflags.h @@ -0,0 +1,42 @@ +/* + * IRQ flags handling + */ +#ifndef _ASM_IRQFLAGS_H +#define _ASM_IRQFLAGS_H + +#ifndef __ASSEMBLY__ +/* + * Get definitions for raw_local_save_flags(x), etc. + */ +#include + +#else +#ifdef CONFIG_TRACE_IRQFLAGS +/* + * Most of the CPU's IRQ-state tracing is done from assembly code; we + * have to call a C function so call a wrapper that saves all the + * C-clobbered registers. + */ +#define TRACE_ENABLE_INTS bl .trace_hardirqs_on +#define TRACE_DISABLE_INTS bl .trace_hardirqs_off +#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) \ + cmpdi en, 0; \ + bne 95f; \ + stb en,PACASOFTIRQEN(r13); \ + bl .trace_hardirqs_off; \ + b skip; \ +95: bl .trace_hardirqs_on; \ + li en,1; +#define TRACE_AND_RESTORE_IRQ(en) \ + TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f); \ +96: stb en,PACASOFTIRQEN(r13) +#else +#define TRACE_ENABLE_INTS +#define TRACE_DISABLE_INTS +#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) +#define TRACE_AND_RESTORE_IRQ(en) \ + stb en,PACASOFTIRQEN(r13) +#endif +#endif + +#endif diff --git a/arch/powerpc/include/asm/iseries/alpaca.h b/arch/powerpc/include/asm/iseries/alpaca.h new file mode 100644 index 000000000000..c0cce6727a69 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/alpaca.h @@ -0,0 +1,31 @@ +/* + * Copyright © 2008 Stephen Rothwell IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_ISERIES_ALPACA_H +#define _ASM_POWERPC_ISERIES_ALPACA_H + +/* + * This is the part of the paca that the iSeries hypervisor + * needs to be statically initialised. Immediately after boot + * we switch to the normal Linux paca. + */ +struct alpaca { + struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */ + const void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */ +}; + +#endif /* _ASM_POWERPC_ISERIES_ALPACA_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_call.h b/arch/powerpc/include/asm/iseries/hv_call.h new file mode 100644 index 000000000000..162d653ad51f --- /dev/null +++ b/arch/powerpc/include/asm/iseries/hv_call.h @@ -0,0 +1,111 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This file contains the "hypervisor call" interface which is used to + * drive the hypervisor from the OS. + */ +#ifndef _ASM_POWERPC_ISERIES_HV_CALL_H +#define _ASM_POWERPC_ISERIES_HV_CALL_H + +#include +#include +#include + +/* Type of yield for HvCallBaseYieldProcessor */ +#define HvCall_YieldTimed 0 /* Yield until specified time (tb) */ +#define HvCall_YieldToActive 1 /* Yield until all active procs have run */ +#define HvCall_YieldToProc 2 /* Yield until the specified processor has run */ + +/* interrupt masks for setEnabledInterrupts */ +#define HvCall_MaskIPI 0x00000001 +#define HvCall_MaskLpEvent 0x00000002 +#define HvCall_MaskLpProd 0x00000004 +#define HvCall_MaskTimeout 0x00000008 + +/* Log buffer formats */ +#define HvCall_LogBuffer_ASCII 0 +#define HvCall_LogBuffer_EBCDIC 1 + +#define HvCallBaseAckDeferredInts HvCallBase + 0 +#define HvCallBaseCpmPowerOff HvCallBase + 1 +#define HvCallBaseGetHwPatch HvCallBase + 2 +#define HvCallBaseReIplSpAttn HvCallBase + 3 +#define HvCallBaseSetASR HvCallBase + 4 +#define HvCallBaseSetASRAndRfi HvCallBase + 5 +#define HvCallBaseSetIMR HvCallBase + 6 +#define HvCallBaseSendIPI HvCallBase + 7 +#define HvCallBaseTerminateMachine HvCallBase + 8 +#define HvCallBaseTerminateMachineSrc HvCallBase + 9 +#define HvCallBaseProcessPlicInterrupts HvCallBase + 10 +#define HvCallBaseIsPrimaryCpmOrMsdIpl HvCallBase + 11 +#define HvCallBaseSetVirtualSIT HvCallBase + 12 +#define HvCallBaseVaryOffThisProcessor HvCallBase + 13 +#define HvCallBaseVaryOffMemoryChunk HvCallBase + 14 +#define HvCallBaseVaryOffInteractivePercentage HvCallBase + 15 +#define HvCallBaseSendLpProd HvCallBase + 16 +#define HvCallBaseSetEnabledInterrupts HvCallBase + 17 +#define HvCallBaseYieldProcessor HvCallBase + 18 +#define HvCallBaseVaryOffSharedProcUnits HvCallBase + 19 +#define HvCallBaseSetVirtualDecr HvCallBase + 20 +#define HvCallBaseClearLogBuffer HvCallBase + 21 +#define HvCallBaseGetLogBufferCodePage HvCallBase + 22 +#define HvCallBaseGetLogBufferFormat HvCallBase + 23 +#define HvCallBaseGetLogBufferLength HvCallBase + 24 +#define HvCallBaseReadLogBuffer HvCallBase + 25 +#define HvCallBaseSetLogBufferFormatAndCodePage HvCallBase + 26 +#define HvCallBaseWriteLogBuffer HvCallBase + 27 +#define HvCallBaseRouter28 HvCallBase + 28 +#define HvCallBaseRouter29 HvCallBase + 29 +#define HvCallBaseRouter30 HvCallBase + 30 +#define HvCallBaseSetDebugBus HvCallBase + 31 + +#define HvCallCcSetDABR HvCallCc + 7 + +static inline void HvCall_setVirtualDecr(void) +{ + /* + * Ignore any error return codes - most likely means that the + * target value for the LP has been increased and this vary off + * would bring us below the new target. + */ + HvCall0(HvCallBaseSetVirtualDecr); +} + +static inline void HvCall_yieldProcessor(unsigned typeOfYield, u64 yieldParm) +{ + HvCall2(HvCallBaseYieldProcessor, typeOfYield, yieldParm); +} + +static inline void HvCall_setEnabledInterrupts(u64 enabledInterrupts) +{ + HvCall1(HvCallBaseSetEnabledInterrupts, enabledInterrupts); +} + +static inline void HvCall_setLogBufferFormatAndCodepage(int format, + u32 codePage) +{ + HvCall2(HvCallBaseSetLogBufferFormatAndCodePage, format, codePage); +} + +extern void HvCall_writeLogBuffer(const void *buffer, u64 bufLen); + +static inline void HvCall_sendIPI(struct paca_struct *targetPaca) +{ + HvCall1(HvCallBaseSendIPI, targetPaca->paca_index); +} + +#endif /* _ASM_POWERPC_ISERIES_HV_CALL_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_call_event.h b/arch/powerpc/include/asm/iseries/hv_call_event.h new file mode 100644 index 000000000000..cc029d388e11 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/hv_call_event.h @@ -0,0 +1,201 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This file contains the "hypervisor call" interface which is used to + * drive the hypervisor from the OS. + */ +#ifndef _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H +#define _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H + +#include +#include + +#include +#include +#include + +struct HvLpEvent; + +typedef u8 HvLpEvent_Type; +typedef u8 HvLpEvent_AckInd; +typedef u8 HvLpEvent_AckType; + +typedef u8 HvLpDma_Direction; +typedef u8 HvLpDma_AddressType; + +typedef u64 HvLpEvent_Rc; +typedef u64 HvLpDma_Rc; + +#define HvCallEventAckLpEvent HvCallEvent + 0 +#define HvCallEventCancelLpEvent HvCallEvent + 1 +#define HvCallEventCloseLpEventPath HvCallEvent + 2 +#define HvCallEventDmaBufList HvCallEvent + 3 +#define HvCallEventDmaSingle HvCallEvent + 4 +#define HvCallEventDmaToSp HvCallEvent + 5 +#define HvCallEventGetOverflowLpEvents HvCallEvent + 6 +#define HvCallEventGetSourceLpInstanceId HvCallEvent + 7 +#define HvCallEventGetTargetLpInstanceId HvCallEvent + 8 +#define HvCallEventOpenLpEventPath HvCallEvent + 9 +#define HvCallEventSetLpEventStack HvCallEvent + 10 +#define HvCallEventSignalLpEvent HvCallEvent + 11 +#define HvCallEventSignalLpEventParms HvCallEvent + 12 +#define HvCallEventSetInterLpQueueIndex HvCallEvent + 13 +#define HvCallEventSetLpEventQueueInterruptProc HvCallEvent + 14 +#define HvCallEventRouter15 HvCallEvent + 15 + +static inline void HvCallEvent_getOverflowLpEvents(u8 queueIndex) +{ + HvCall1(HvCallEventGetOverflowLpEvents, queueIndex); +} + +static inline void HvCallEvent_setInterLpQueueIndex(u8 queueIndex) +{ + HvCall1(HvCallEventSetInterLpQueueIndex, queueIndex); +} + +static inline void HvCallEvent_setLpEventStack(u8 queueIndex, + char *eventStackAddr, u32 eventStackSize) +{ + HvCall3(HvCallEventSetLpEventStack, queueIndex, + virt_to_abs(eventStackAddr), eventStackSize); +} + +static inline void HvCallEvent_setLpEventQueueInterruptProc(u8 queueIndex, + u16 lpLogicalProcIndex) +{ + HvCall2(HvCallEventSetLpEventQueueInterruptProc, queueIndex, + lpLogicalProcIndex); +} + +static inline HvLpEvent_Rc HvCallEvent_signalLpEvent(struct HvLpEvent *event) +{ + return HvCall1(HvCallEventSignalLpEvent, virt_to_abs(event)); +} + +static inline HvLpEvent_Rc HvCallEvent_signalLpEventFast(HvLpIndex targetLp, + HvLpEvent_Type type, u16 subtype, HvLpEvent_AckInd ackInd, + HvLpEvent_AckType ackType, HvLpInstanceId sourceInstanceId, + HvLpInstanceId targetInstanceId, u64 correlationToken, + u64 eventData1, u64 eventData2, u64 eventData3, + u64 eventData4, u64 eventData5) +{ + /* Pack the misc bits into a single Dword to pass to PLIC */ + union { + struct { + u8 ack_and_target; + u8 type; + u16 subtype; + HvLpInstanceId src_inst; + HvLpInstanceId target_inst; + } parms; + u64 dword; + } packed; + + packed.parms.ack_and_target = (ackType << 7) | (ackInd << 6) | targetLp; + packed.parms.type = type; + packed.parms.subtype = subtype; + packed.parms.src_inst = sourceInstanceId; + packed.parms.target_inst = targetInstanceId; + + return HvCall7(HvCallEventSignalLpEventParms, packed.dword, + correlationToken, eventData1, eventData2, + eventData3, eventData4, eventData5); +} + +extern void *iseries_hv_alloc(size_t size, dma_addr_t *dma_handle, gfp_t flag); +extern void iseries_hv_free(size_t size, void *vaddr, dma_addr_t dma_handle); +extern dma_addr_t iseries_hv_map(void *vaddr, size_t size, + enum dma_data_direction direction); +extern void iseries_hv_unmap(dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction); + +static inline HvLpEvent_Rc HvCallEvent_ackLpEvent(struct HvLpEvent *event) +{ + return HvCall1(HvCallEventAckLpEvent, virt_to_abs(event)); +} + +static inline HvLpEvent_Rc HvCallEvent_cancelLpEvent(struct HvLpEvent *event) +{ + return HvCall1(HvCallEventCancelLpEvent, virt_to_abs(event)); +} + +static inline HvLpInstanceId HvCallEvent_getSourceLpInstanceId( + HvLpIndex targetLp, HvLpEvent_Type type) +{ + return HvCall2(HvCallEventGetSourceLpInstanceId, targetLp, type); +} + +static inline HvLpInstanceId HvCallEvent_getTargetLpInstanceId( + HvLpIndex targetLp, HvLpEvent_Type type) +{ + return HvCall2(HvCallEventGetTargetLpInstanceId, targetLp, type); +} + +static inline void HvCallEvent_openLpEventPath(HvLpIndex targetLp, + HvLpEvent_Type type) +{ + HvCall2(HvCallEventOpenLpEventPath, targetLp, type); +} + +static inline void HvCallEvent_closeLpEventPath(HvLpIndex targetLp, + HvLpEvent_Type type) +{ + HvCall2(HvCallEventCloseLpEventPath, targetLp, type); +} + +static inline HvLpDma_Rc HvCallEvent_dmaBufList(HvLpEvent_Type type, + HvLpIndex remoteLp, HvLpDma_Direction direction, + HvLpInstanceId localInstanceId, + HvLpInstanceId remoteInstanceId, + HvLpDma_AddressType localAddressType, + HvLpDma_AddressType remoteAddressType, + /* Do these need to be converted to absolute addresses? */ + u64 localBufList, u64 remoteBufList, u32 transferLength) +{ + /* Pack the misc bits into a single Dword to pass to PLIC */ + union { + struct { + u8 flags; + HvLpIndex remote; + u8 type; + u8 reserved; + HvLpInstanceId local_inst; + HvLpInstanceId remote_inst; + } parms; + u64 dword; + } packed; + + packed.parms.flags = (direction << 7) | + (localAddressType << 6) | (remoteAddressType << 5); + packed.parms.remote = remoteLp; + packed.parms.type = type; + packed.parms.reserved = 0; + packed.parms.local_inst = localInstanceId; + packed.parms.remote_inst = remoteInstanceId; + + return HvCall4(HvCallEventDmaBufList, packed.dword, localBufList, + remoteBufList, transferLength); +} + +static inline HvLpDma_Rc HvCallEvent_dmaToSp(void *local, u32 remote, + u32 length, HvLpDma_Direction dir) +{ + return HvCall4(HvCallEventDmaToSp, virt_to_abs(local), remote, + length, dir); +} + +#endif /* _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_call_sc.h b/arch/powerpc/include/asm/iseries/hv_call_sc.h new file mode 100644 index 000000000000..f5d210959250 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/hv_call_sc.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_ISERIES_HV_CALL_SC_H +#define _ASM_POWERPC_ISERIES_HV_CALL_SC_H + +#include + +#define HvCallBase 0x8000000000000000ul +#define HvCallCc 0x8001000000000000ul +#define HvCallCfg 0x8002000000000000ul +#define HvCallEvent 0x8003000000000000ul +#define HvCallHpt 0x8004000000000000ul +#define HvCallPci 0x8005000000000000ul +#define HvCallSm 0x8007000000000000ul +#define HvCallXm 0x8009000000000000ul + +extern u64 HvCall0(u64); +extern u64 HvCall1(u64, u64); +extern u64 HvCall2(u64, u64, u64); +extern u64 HvCall3(u64, u64, u64, u64); +extern u64 HvCall4(u64, u64, u64, u64, u64); +extern u64 HvCall5(u64, u64, u64, u64, u64, u64); +extern u64 HvCall6(u64, u64, u64, u64, u64, u64, u64); +extern u64 HvCall7(u64, u64, u64, u64, u64, u64, u64, u64); + +extern u64 HvCall0Ret16(u64, void *); +extern u64 HvCall1Ret16(u64, void *, u64); +extern u64 HvCall2Ret16(u64, void *, u64, u64); +extern u64 HvCall3Ret16(u64, void *, u64, u64, u64); +extern u64 HvCall4Ret16(u64, void *, u64, u64, u64, u64); +extern u64 HvCall5Ret16(u64, void *, u64, u64, u64, u64, u64); +extern u64 HvCall6Ret16(u64, void *, u64, u64, u64, u64, u64, u64); +extern u64 HvCall7Ret16(u64, void *, u64, u64 ,u64 ,u64 ,u64 ,u64 ,u64); + +#endif /* _ASM_POWERPC_ISERIES_HV_CALL_SC_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_call_xm.h b/arch/powerpc/include/asm/iseries/hv_call_xm.h new file mode 100644 index 000000000000..392ac3f54df0 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/hv_call_xm.h @@ -0,0 +1,61 @@ +/* + * This file contains the "hypervisor call" interface which is used to + * drive the hypervisor from SLIC. + */ +#ifndef _ASM_POWERPC_ISERIES_HV_CALL_XM_H +#define _ASM_POWERPC_ISERIES_HV_CALL_XM_H + +#include +#include + +#define HvCallXmGetTceTableParms HvCallXm + 0 +#define HvCallXmTestBus HvCallXm + 1 +#define HvCallXmConnectBusUnit HvCallXm + 2 +#define HvCallXmLoadTod HvCallXm + 8 +#define HvCallXmTestBusUnit HvCallXm + 9 +#define HvCallXmSetTce HvCallXm + 11 +#define HvCallXmSetTces HvCallXm + 13 + +static inline void HvCallXm_getTceTableParms(u64 cb) +{ + HvCall1(HvCallXmGetTceTableParms, cb); +} + +static inline u64 HvCallXm_setTce(u64 tceTableToken, u64 tceOffset, u64 tce) +{ + return HvCall3(HvCallXmSetTce, tceTableToken, tceOffset, tce); +} + +static inline u64 HvCallXm_setTces(u64 tceTableToken, u64 tceOffset, + u64 numTces, u64 tce1, u64 tce2, u64 tce3, u64 tce4) +{ + return HvCall7(HvCallXmSetTces, tceTableToken, tceOffset, numTces, + tce1, tce2, tce3, tce4); +} + +static inline u64 HvCallXm_testBus(u16 busNumber) +{ + return HvCall1(HvCallXmTestBus, busNumber); +} + +static inline u64 HvCallXm_testBusUnit(u16 busNumber, u8 subBusNumber, + u8 deviceId) +{ + return HvCall2(HvCallXmTestBusUnit, busNumber, + (subBusNumber << 8) | deviceId); +} + +static inline u64 HvCallXm_connectBusUnit(u16 busNumber, u8 subBusNumber, + u8 deviceId, u64 interruptToken) +{ + return HvCall5(HvCallXmConnectBusUnit, busNumber, + (subBusNumber << 8) | deviceId, interruptToken, 0, + 0 /* HvLpConfig::mapDsaToQueueIndex(HvLpDSA(busNumber, xBoard, xCard)) */); +} + +static inline u64 HvCallXm_loadTod(void) +{ + return HvCall0(HvCallXmLoadTod); +} + +#endif /* _ASM_POWERPC_ISERIES_HV_CALL_XM_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_lp_config.h b/arch/powerpc/include/asm/iseries/hv_lp_config.h new file mode 100644 index 000000000000..a006fd1e4a2c --- /dev/null +++ b/arch/powerpc/include/asm/iseries/hv_lp_config.h @@ -0,0 +1,128 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H +#define _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H + +/* + * This file contains the interface to the LPAR configuration data + * to determine which resources should be allocated to each partition. + */ + +#include +#include + +enum { + HvCallCfg_Cur = 0, + HvCallCfg_Init = 1, + HvCallCfg_Max = 2, + HvCallCfg_Min = 3 +}; + +#define HvCallCfgGetSystemPhysicalProcessors HvCallCfg + 6 +#define HvCallCfgGetPhysicalProcessors HvCallCfg + 7 +#define HvCallCfgGetMsChunks HvCallCfg + 9 +#define HvCallCfgGetSharedPoolIndex HvCallCfg + 20 +#define HvCallCfgGetSharedProcUnits HvCallCfg + 21 +#define HvCallCfgGetNumProcsInSharedPool HvCallCfg + 22 +#define HvCallCfgGetVirtualLanIndexMap HvCallCfg + 30 +#define HvCallCfgGetHostingLpIndex HvCallCfg + 32 + +extern HvLpIndex HvLpConfig_getLpIndex_outline(void); +extern HvLpIndex HvLpConfig_getLpIndex(void); +extern HvLpIndex HvLpConfig_getPrimaryLpIndex(void); + +static inline u64 HvLpConfig_getMsChunks(void) +{ + return HvCall2(HvCallCfgGetMsChunks, HvLpConfig_getLpIndex(), + HvCallCfg_Cur); +} + +static inline u64 HvLpConfig_getSystemPhysicalProcessors(void) +{ + return HvCall0(HvCallCfgGetSystemPhysicalProcessors); +} + +static inline u64 HvLpConfig_getNumProcsInSharedPool(HvLpSharedPoolIndex sPI) +{ + return (u16)HvCall1(HvCallCfgGetNumProcsInSharedPool, sPI); +} + +static inline u64 HvLpConfig_getPhysicalProcessors(void) +{ + return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(), + HvCallCfg_Cur); +} + +static inline HvLpSharedPoolIndex HvLpConfig_getSharedPoolIndex(void) +{ + return HvCall1(HvCallCfgGetSharedPoolIndex, HvLpConfig_getLpIndex()); +} + +static inline u64 HvLpConfig_getSharedProcUnits(void) +{ + return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(), + HvCallCfg_Cur); +} + +static inline u64 HvLpConfig_getMaxSharedProcUnits(void) +{ + return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(), + HvCallCfg_Max); +} + +static inline u64 HvLpConfig_getMaxPhysicalProcessors(void) +{ + return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(), + HvCallCfg_Max); +} + +static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMapForLp( + HvLpIndex lp) +{ + /* + * This is a new function in V5R1 so calls to this on older + * hypervisors will return -1 + */ + u64 retVal = HvCall1(HvCallCfgGetVirtualLanIndexMap, lp); + if (retVal == -1) + retVal = 0; + return retVal; +} + +static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMap(void) +{ + return HvLpConfig_getVirtualLanIndexMapForLp( + HvLpConfig_getLpIndex_outline()); +} + +static inline int HvLpConfig_doLpsCommunicateOnVirtualLan(HvLpIndex lp1, + HvLpIndex lp2) +{ + HvLpVirtualLanIndexMap virtualLanIndexMap1 = + HvLpConfig_getVirtualLanIndexMapForLp(lp1); + HvLpVirtualLanIndexMap virtualLanIndexMap2 = + HvLpConfig_getVirtualLanIndexMapForLp(lp2); + return ((virtualLanIndexMap1 & virtualLanIndexMap2) != 0); +} + +static inline HvLpIndex HvLpConfig_getHostingLpIndex(HvLpIndex lp) +{ + return HvCall1(HvCallCfgGetHostingLpIndex, lp); +} + +#endif /* _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_lp_event.h b/arch/powerpc/include/asm/iseries/hv_lp_event.h new file mode 100644 index 000000000000..8f5da7d77202 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/hv_lp_event.h @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* This file contains the class for HV events in the system. */ + +#ifndef _ASM_POWERPC_ISERIES_HV_LP_EVENT_H +#define _ASM_POWERPC_ISERIES_HV_LP_EVENT_H + +#include +#include +#include +#include + +/* + * HvLpEvent is the structure for Lp Event messages passed between + * partitions through PLIC. + */ + +struct HvLpEvent { + u8 flags; /* Event flags x00-x00 */ + u8 xType; /* Type of message x01-x01 */ + u16 xSubtype; /* Subtype for event x02-x03 */ + u8 xSourceLp; /* Source LP x04-x04 */ + u8 xTargetLp; /* Target LP x05-x05 */ + u8 xSizeMinus1; /* Size of Derived class - 1 x06-x06 */ + u8 xRc; /* RC for Ack flows x07-x07 */ + u16 xSourceInstanceId; /* Source sides instance id x08-x09 */ + u16 xTargetInstanceId; /* Target sides instance id x0A-x0B */ + union { + u32 xSubtypeData; /* Data usable by the subtype x0C-x0F */ + u16 xSubtypeDataShort[2]; /* Data as 2 shorts */ + u8 xSubtypeDataChar[4]; /* Data as 4 chars */ + } x; + + u64 xCorrelationToken; /* Unique value for source/type x10-x17 */ +}; + +typedef void (*LpEventHandler)(struct HvLpEvent *); + +/* Register a handler for an event type - returns 0 on success */ +extern int HvLpEvent_registerHandler(HvLpEvent_Type eventType, + LpEventHandler hdlr); + +/* + * Unregister a handler for an event type + * + * This call will sleep until the handler being removed is guaranteed to + * be no longer executing on any CPU. Do not call with locks held. + * + * returns 0 on success + * Unregister will fail if there are any paths open for the type + */ +extern int HvLpEvent_unregisterHandler(HvLpEvent_Type eventType); + +/* + * Open an Lp Event Path for an event type + * returns 0 on success + * openPath will fail if there is no handler registered for the event type. + * The lpIndex specified is the partition index for the target partition + * (for VirtualIo, VirtualLan and SessionMgr) other types specify zero) + */ +extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex); + +/* + * Close an Lp Event Path for a type and partition + * returns 0 on success + */ +extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex); + +#define HvLpEvent_Type_Hypervisor 0 +#define HvLpEvent_Type_MachineFac 1 +#define HvLpEvent_Type_SessionMgr 2 +#define HvLpEvent_Type_SpdIo 3 +#define HvLpEvent_Type_VirtualBus 4 +#define HvLpEvent_Type_PciIo 5 +#define HvLpEvent_Type_RioIo 6 +#define HvLpEvent_Type_VirtualLan 7 +#define HvLpEvent_Type_VirtualIo 8 +#define HvLpEvent_Type_NumTypes 9 + +#define HvLpEvent_Rc_Good 0 +#define HvLpEvent_Rc_BufferNotAvailable 1 +#define HvLpEvent_Rc_Cancelled 2 +#define HvLpEvent_Rc_GenericError 3 +#define HvLpEvent_Rc_InvalidAddress 4 +#define HvLpEvent_Rc_InvalidPartition 5 +#define HvLpEvent_Rc_InvalidSize 6 +#define HvLpEvent_Rc_InvalidSubtype 7 +#define HvLpEvent_Rc_InvalidSubtypeData 8 +#define HvLpEvent_Rc_InvalidType 9 +#define HvLpEvent_Rc_PartitionDead 10 +#define HvLpEvent_Rc_PathClosed 11 +#define HvLpEvent_Rc_SubtypeError 12 + +#define HvLpEvent_Function_Ack 0 +#define HvLpEvent_Function_Int 1 + +#define HvLpEvent_AckInd_NoAck 0 +#define HvLpEvent_AckInd_DoAck 1 + +#define HvLpEvent_AckType_ImmediateAck 0 +#define HvLpEvent_AckType_DeferredAck 1 + +#define HV_LP_EVENT_INT 0x01 +#define HV_LP_EVENT_DO_ACK 0x02 +#define HV_LP_EVENT_DEFERRED_ACK 0x04 +#define HV_LP_EVENT_VALID 0x80 + +#define HvLpDma_Direction_LocalToRemote 0 +#define HvLpDma_Direction_RemoteToLocal 1 + +#define HvLpDma_AddressType_TceIndex 0 +#define HvLpDma_AddressType_RealAddress 1 + +#define HvLpDma_Rc_Good 0 +#define HvLpDma_Rc_Error 1 +#define HvLpDma_Rc_PartitionDead 2 +#define HvLpDma_Rc_PathClosed 3 +#define HvLpDma_Rc_InvalidAddress 4 +#define HvLpDma_Rc_InvalidLength 5 + +static inline int hvlpevent_is_valid(struct HvLpEvent *h) +{ + return h->flags & HV_LP_EVENT_VALID; +} + +static inline void hvlpevent_invalidate(struct HvLpEvent *h) +{ + h->flags &= ~ HV_LP_EVENT_VALID; +} + +static inline int hvlpevent_is_int(struct HvLpEvent *h) +{ + return h->flags & HV_LP_EVENT_INT; +} + +static inline int hvlpevent_is_ack(struct HvLpEvent *h) +{ + return !hvlpevent_is_int(h); +} + +static inline int hvlpevent_need_ack(struct HvLpEvent *h) +{ + return h->flags & HV_LP_EVENT_DO_ACK; +} + +#endif /* _ASM_POWERPC_ISERIES_HV_LP_EVENT_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_types.h b/arch/powerpc/include/asm/iseries/hv_types.h new file mode 100644 index 000000000000..c3e6d2a1d1c3 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/hv_types.h @@ -0,0 +1,112 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_ISERIES_HV_TYPES_H +#define _ASM_POWERPC_ISERIES_HV_TYPES_H + +/* + * General typedefs for the hypervisor. + */ + +#include + +typedef u8 HvLpIndex; +typedef u16 HvLpInstanceId; +typedef u64 HvLpTOD; +typedef u64 HvLpSystemSerialNum; +typedef u8 HvLpDeviceSerialNum[12]; +typedef u16 HvLpSanHwSet; +typedef u16 HvLpBus; +typedef u16 HvLpBoard; +typedef u16 HvLpCard; +typedef u8 HvLpDeviceType[4]; +typedef u8 HvLpDeviceModel[3]; +typedef u64 HvIoToken; +typedef u8 HvLpName[8]; +typedef u32 HvIoId; +typedef u64 HvRealMemoryIndex; +typedef u32 HvLpIndexMap; /* Must hold HVMAXARCHITECTEDLPS bits!!! */ +typedef u16 HvLpVrmIndex; +typedef u32 HvXmGenerationId; +typedef u8 HvLpBusPool; +typedef u8 HvLpSharedPoolIndex; +typedef u16 HvLpSharedProcUnitsX100; +typedef u8 HvLpVirtualLanIndex; +typedef u16 HvLpVirtualLanIndexMap; /* Must hold HVMAXARCHITECTEDVIRTUALLANS bits!!! */ +typedef u16 HvBusNumber; /* Hypervisor Bus Number */ +typedef u8 HvSubBusNumber; /* Hypervisor SubBus Number */ +typedef u8 HvAgentId; /* Hypervisor DevFn */ + + +#define HVMAXARCHITECTEDLPS 32 +#define HVMAXARCHITECTEDVIRTUALLANS 16 +#define HVMAXARCHITECTEDVIRTUALDISKS 32 +#define HVMAXARCHITECTEDVIRTUALCDROMS 8 +#define HVMAXARCHITECTEDVIRTUALTAPES 8 +#define HVCHUNKSIZE (256 * 1024) +#define HVPAGESIZE (4 * 1024) +#define HVLPMINMEGSPRIMARY 256 +#define HVLPMINMEGSSECONDARY 64 +#define HVCHUNKSPERMEG 4 +#define HVPAGESPERMEG 256 +#define HVPAGESPERCHUNK 64 + +#define HvLpIndexInvalid ((HvLpIndex)0xff) + +/* + * Enums for the sub-components under PLIC + * Used in HvCall and HvPrimaryCall + */ +enum { + HvCallCompId = 0, + HvCallCpuCtlsCompId = 1, + HvCallCfgCompId = 2, + HvCallEventCompId = 3, + HvCallHptCompId = 4, + HvCallPciCompId = 5, + HvCallSlmCompId = 6, + HvCallSmCompId = 7, + HvCallSpdCompId = 8, + HvCallXmCompId = 9, + HvCallRioCompId = 10, + HvCallRsvd3CompId = 11, + HvCallRsvd2CompId = 12, + HvCallRsvd1CompId = 13, + HvCallMaxCompId = 14, + HvPrimaryCallCompId = 0, + HvPrimaryCallCfgCompId = 1, + HvPrimaryCallPciCompId = 2, + HvPrimaryCallSmCompId = 3, + HvPrimaryCallSpdCompId = 4, + HvPrimaryCallXmCompId = 5, + HvPrimaryCallRioCompId = 6, + HvPrimaryCallRsvd7CompId = 7, + HvPrimaryCallRsvd6CompId = 8, + HvPrimaryCallRsvd5CompId = 9, + HvPrimaryCallRsvd4CompId = 10, + HvPrimaryCallRsvd3CompId = 11, + HvPrimaryCallRsvd2CompId = 12, + HvPrimaryCallRsvd1CompId = 13, + HvPrimaryCallMaxCompId = HvCallMaxCompId +}; + +struct HvLpBufferList { + u64 addr; + u64 len; +}; + +#endif /* _ASM_POWERPC_ISERIES_HV_TYPES_H */ diff --git a/arch/powerpc/include/asm/iseries/iommu.h b/arch/powerpc/include/asm/iseries/iommu.h new file mode 100644 index 000000000000..c59ee7e4bed1 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/iommu.h @@ -0,0 +1,41 @@ +#ifndef _ASM_POWERPC_ISERIES_IOMMU_H +#define _ASM_POWERPC_ISERIES_IOMMU_H + +/* + * Copyright (C) 2005 Stephen Rothwell, IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the: + * Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA + */ + +struct pci_dev; +struct vio_dev; +struct device_node; +struct iommu_table; + +/* Creates table for an individual device node */ +extern void iommu_devnode_init_iSeries(struct pci_dev *pdev, + struct device_node *dn); + +/* Get table parameters from HV */ +extern void iommu_table_getparms_iSeries(unsigned long busno, + unsigned char slotno, unsigned char virtbus, + struct iommu_table *tbl); + +extern struct iommu_table *vio_build_iommu_table_iseries(struct vio_dev *dev); +extern void iommu_vio_init(void); + +#endif /* _ASM_POWERPC_ISERIES_IOMMU_H */ diff --git a/arch/powerpc/include/asm/iseries/it_lp_queue.h b/arch/powerpc/include/asm/iseries/it_lp_queue.h new file mode 100644 index 000000000000..428278838821 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/it_lp_queue.h @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H +#define _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H + +/* + * This control block defines the simple LP queue structure that is + * shared between the hypervisor (PLIC) and the OS in order to send + * events to an LP. + */ + +#include +#include + +#define IT_LP_MAX_QUEUES 8 + +#define IT_LP_NOT_USED 0 /* Queue will not be used by PLIC */ +#define IT_LP_DEDICATED_IO 1 /* Queue dedicated to IO processor specified */ +#define IT_LP_DEDICATED_LP 2 /* Queue dedicated to LP specified */ +#define IT_LP_SHARED 3 /* Queue shared for both IO and LP */ + +#define IT_LP_EVENT_STACK_SIZE 4096 +#define IT_LP_EVENT_MAX_SIZE 256 +#define IT_LP_EVENT_ALIGN 64 + +struct hvlpevent_queue { +/* + * The hq_current_event is the pointer to the next event stack entry + * that will become valid. The OS must peek at this entry to determine + * if it is valid. PLIC will set the valid indicator as the very last + * store into that entry. + * + * When the OS has completed processing of the event then it will mark + * the event as invalid so that PLIC knows it can store into that event + * location again. + * + * If the event stack fills and there are overflow events, then PLIC + * will set the hq_overflow_pending flag in which case the OS will + * have to fetch the additional LP events once they have drained the + * event stack. + * + * The first 16-bytes are known by both the OS and PLIC. The remainder + * of the cache line is for use by the OS. + */ + u8 hq_overflow_pending; /* 0x00 Overflow events are pending */ + u8 hq_status; /* 0x01 DedicatedIo or DedicatedLp or NotUsed */ + u16 hq_proc_index; /* 0x02 Logical Proc Index for correlation */ + u8 hq_reserved1[12]; /* 0x04 */ + char *hq_current_event; /* 0x10 */ + char *hq_last_event; /* 0x18 */ + char *hq_event_stack; /* 0x20 */ + u8 hq_index; /* 0x28 unique sequential index. */ + u8 hq_reserved2[3]; /* 0x29-2b */ + spinlock_t hq_lock; +}; + +extern struct hvlpevent_queue hvlpevent_queue; + +extern int hvlpevent_is_pending(void); +extern void process_hvlpevents(void); +extern void setup_hvlpevent_queue(void); + +#endif /* _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H */ diff --git a/arch/powerpc/include/asm/iseries/lpar_map.h b/arch/powerpc/include/asm/iseries/lpar_map.h new file mode 100644 index 000000000000..5e9f3e128ee2 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/lpar_map.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_ISERIES_LPAR_MAP_H +#define _ASM_POWERPC_ISERIES_LPAR_MAP_H + +#ifndef __ASSEMBLY__ + +#include + +#endif + +/* + * The iSeries hypervisor will set up mapping for one or more + * ESID/VSID pairs (in SLB/segment registers) and will set up + * mappings of one or more ranges of pages to VAs. + * We will have the hypervisor set up the ESID->VSID mapping + * for the four kernel segments (C-F). With shared processors, + * the hypervisor will clear all segment registers and reload + * these four whenever the processor is switched from one + * partition to another. + */ + +/* The Vsid and Esid identified below will be used by the hypervisor + * to set up a memory mapping for part of the load area before giving + * control to the Linux kernel. The load area is 64 MB, but this must + * not attempt to map the whole load area. The Hashed Page Table may + * need to be located within the load area (if the total partition size + * is 64 MB), but cannot be mapped. Typically, this should specify + * to map half (32 MB) of the load area. + * + * The hypervisor will set up page table entries for the number of + * pages specified. + * + * In 32-bit mode, the hypervisor will load all four of the + * segment registers (identified by the low-order four bits of the + * Esid field. In 64-bit mode, the hypervisor will load one SLB + * entry to map the Esid to the Vsid. +*/ + +#define HvEsidsToMap 2 +#define HvRangesToMap 1 + +/* Hypervisor initially maps 32MB of the load area */ +#define HvPagesToMap 8192 + +#ifndef __ASSEMBLY__ +struct LparMap { + u64 xNumberEsids; // Number of ESID/VSID pairs + u64 xNumberRanges; // Number of VA ranges to map + u64 xSegmentTableOffs; // Page number within load area of seg table + u64 xRsvd[5]; + struct { + u64 xKernelEsid; // Esid used to map kernel load + u64 xKernelVsid; // Vsid used to map kernel load + } xEsids[HvEsidsToMap]; + struct { + u64 xPages; // Number of pages to be mapped + u64 xOffset; // Offset from start of load area + u64 xVPN; // Virtual Page Number + } xRanges[HvRangesToMap]; +}; + +extern const struct LparMap xLparMap; + +#endif /* __ASSEMBLY__ */ + +/* the fixed address where the LparMap exists */ +#define LPARMAP_PHYS 0x7000 + +#endif /* _ASM_POWERPC_ISERIES_LPAR_MAP_H */ diff --git a/arch/powerpc/include/asm/iseries/mf.h b/arch/powerpc/include/asm/iseries/mf.h new file mode 100644 index 000000000000..eb851a9c9e5c --- /dev/null +++ b/arch/powerpc/include/asm/iseries/mf.h @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2001 Troy D. Armstrong IBM Corporation + * Copyright (C) 2004 Stephen Rothwell IBM Corporation + * + * This modules exists as an interface between a Linux secondary partition + * running on an iSeries and the primary partition's Virtual Service + * Processor (VSP) object. The VSP has final authority over powering on/off + * all partitions in the iSeries. It also provides miscellaneous low-level + * machine facility type operations. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_ISERIES_MF_H +#define _ASM_POWERPC_ISERIES_MF_H + +#include + +#include +#include + +struct rtc_time; + +typedef void (*MFCompleteHandler)(void *clientToken, int returnCode); + +extern void mf_allocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type, + unsigned size, unsigned amount, MFCompleteHandler hdlr, + void *userToken); +extern void mf_deallocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type, + unsigned count, MFCompleteHandler hdlr, void *userToken); + +extern void mf_power_off(void); +extern void mf_reboot(char *cmd); + +extern void mf_display_src(u32 word); +extern void mf_display_progress(u16 value); + +extern void mf_init(void); + +#endif /* _ASM_POWERPC_ISERIES_MF_H */ diff --git a/arch/powerpc/include/asm/iseries/vio.h b/arch/powerpc/include/asm/iseries/vio.h new file mode 100644 index 000000000000..f9ac0d00b951 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/vio.h @@ -0,0 +1,265 @@ +/* -*- linux-c -*- + * + * iSeries Virtual I/O Message Path header + * + * Authors: Dave Boutcher + * Ryan Arnold + * Colin Devilbiss + * + * (C) Copyright 2000 IBM Corporation + * + * This header file is used by the iSeries virtual I/O device + * drivers. It defines the interfaces to the common functions + * (implemented in drivers/char/viopath.h) as well as defining + * common functions and structures. Currently (at the time I + * wrote this comment) the iSeries virtual I/O device drivers + * that use this are + * drivers/block/viodasd.c + * drivers/char/viocons.c + * drivers/char/viotape.c + * drivers/cdrom/viocd.c + * + * The iSeries virtual ethernet support (veth.c) uses a whole + * different set of functions. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) anyu later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef _ASM_POWERPC_ISERIES_VIO_H +#define _ASM_POWERPC_ISERIES_VIO_H + +#include +#include + +/* + * iSeries virtual I/O events use the subtype field in + * HvLpEvent to figure out what kind of vio event is coming + * in. We use a table to route these, and this defines + * the maximum number of distinct subtypes + */ +#define VIO_MAX_SUBTYPES 8 + +#define VIOMAXBLOCKDMA 12 + +struct open_data { + u64 disk_size; + u16 max_disk; + u16 cylinders; + u16 tracks; + u16 sectors; + u16 bytes_per_sector; +}; + +struct rw_data { + u64 offset; + struct { + u32 token; + u32 reserved; + u64 len; + } dma_info[VIOMAXBLOCKDMA]; +}; + +struct vioblocklpevent { + struct HvLpEvent event; + u32 reserved; + u16 version; + u16 sub_result; + u16 disk; + u16 flags; + union { + struct open_data open_data; + struct rw_data rw_data; + u64 changed; + } u; +}; + +#define vioblockflags_ro 0x0001 + +enum vioblocksubtype { + vioblockopen = 0x0001, + vioblockclose = 0x0002, + vioblockread = 0x0003, + vioblockwrite = 0x0004, + vioblockflush = 0x0005, + vioblockcheck = 0x0007 +}; + +struct viocdlpevent { + struct HvLpEvent event; + u32 reserved; + u16 version; + u16 sub_result; + u16 disk; + u16 flags; + u32 token; + u64 offset; /* On open, max number of disks */ + u64 len; /* On open, size of the disk */ + u32 block_size; /* Only set on open */ + u32 media_size; /* Only set on open */ +}; + +enum viocdsubtype { + viocdopen = 0x0001, + viocdclose = 0x0002, + viocdread = 0x0003, + viocdwrite = 0x0004, + viocdlockdoor = 0x0005, + viocdgetinfo = 0x0006, + viocdcheck = 0x0007 +}; + +struct viotapelpevent { + struct HvLpEvent event; + u32 reserved; + u16 version; + u16 sub_type_result; + u16 tape; + u16 flags; + u32 token; + u64 len; + union { + struct { + u32 tape_op; + u32 count; + } op; + struct { + u32 type; + u32 resid; + u32 dsreg; + u32 gstat; + u32 erreg; + u32 file_no; + u32 block_no; + } get_status; + struct { + u32 block_no; + } get_pos; + } u; +}; + +enum viotapesubtype { + viotapeopen = 0x0001, + viotapeclose = 0x0002, + viotaperead = 0x0003, + viotapewrite = 0x0004, + viotapegetinfo = 0x0005, + viotapeop = 0x0006, + viotapegetpos = 0x0007, + viotapesetpos = 0x0008, + viotapegetstatus = 0x0009 +}; + +/* + * Each subtype can register a handler to process their events. + * The handler must have this interface. + */ +typedef void (vio_event_handler_t) (struct HvLpEvent * event); + +extern int viopath_open(HvLpIndex remoteLp, int subtype, int numReq); +extern int viopath_close(HvLpIndex remoteLp, int subtype, int numReq); +extern int vio_setHandler(int subtype, vio_event_handler_t * beh); +extern int vio_clearHandler(int subtype); +extern int viopath_isactive(HvLpIndex lp); +extern HvLpInstanceId viopath_sourceinst(HvLpIndex lp); +extern HvLpInstanceId viopath_targetinst(HvLpIndex lp); +extern void vio_set_hostlp(void); +extern void *vio_get_event_buffer(int subtype); +extern void vio_free_event_buffer(int subtype, void *buffer); + +extern struct vio_dev *vio_create_viodasd(u32 unit); + +extern HvLpIndex viopath_hostLp; +extern HvLpIndex viopath_ourLp; + +#define VIOCHAR_MAX_DATA 200 + +#define VIOMAJOR_SUBTYPE_MASK 0xff00 +#define VIOMINOR_SUBTYPE_MASK 0x00ff +#define VIOMAJOR_SUBTYPE_SHIFT 8 + +#define VIOVERSION 0x0101 + +/* + * This is the general structure for VIO errors; each module should have + * a table of them, and each table should be terminated by an entry of + * { 0, 0, NULL }. Then, to find a specific error message, a module + * should pass its local table and the return code. + */ +struct vio_error_entry { + u16 rc; + int errno; + const char *msg; +}; +extern const struct vio_error_entry *vio_lookup_rc( + const struct vio_error_entry *local_table, u16 rc); + +enum viosubtypes { + viomajorsubtype_monitor = 0x0100, + viomajorsubtype_blockio = 0x0200, + viomajorsubtype_chario = 0x0300, + viomajorsubtype_config = 0x0400, + viomajorsubtype_cdio = 0x0500, + viomajorsubtype_tape = 0x0600, + viomajorsubtype_scsi = 0x0700 +}; + +enum vioconfigsubtype { + vioconfigget = 0x0001, +}; + +enum viorc { + viorc_good = 0x0000, + viorc_noConnection = 0x0001, + viorc_noReceiver = 0x0002, + viorc_noBufferAvailable = 0x0003, + viorc_invalidMessageType = 0x0004, + viorc_invalidRange = 0x0201, + viorc_invalidToken = 0x0202, + viorc_DMAError = 0x0203, + viorc_useError = 0x0204, + viorc_releaseError = 0x0205, + viorc_invalidDisk = 0x0206, + viorc_openRejected = 0x0301 +}; + +/* + * The structure of the events that flow between us and OS/400 for chario + * events. You can't mess with this unless the OS/400 side changes too. + */ +struct viocharlpevent { + struct HvLpEvent event; + u32 reserved; + u16 version; + u16 subtype_result_code; + u8 virtual_device; + u8 len; + u8 data[VIOCHAR_MAX_DATA]; +}; + +#define VIOCHAR_WINDOW 10 + +enum viocharsubtype { + viocharopen = 0x0001, + viocharclose = 0x0002, + viochardata = 0x0003, + viocharack = 0x0004, + viocharconfig = 0x0005 +}; + +enum viochar_rc { + viochar_rc_ebusy = 1 +}; + +#endif /* _ASM_POWERPC_ISERIES_VIO_H */ diff --git a/arch/powerpc/include/asm/kdebug.h b/arch/powerpc/include/asm/kdebug.h new file mode 100644 index 000000000000..ae6d206728af --- /dev/null +++ b/arch/powerpc/include/asm/kdebug.h @@ -0,0 +1,15 @@ +#ifndef _ASM_POWERPC_KDEBUG_H +#define _ASM_POWERPC_KDEBUG_H +#ifdef __KERNEL__ + +/* Grossly misnamed. */ +enum die_val { + DIE_OOPS = 1, + DIE_IABR_MATCH, + DIE_DABR_MATCH, + DIE_BPT, + DIE_SSTEP, +}; + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_KDEBUG_H */ diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h new file mode 100644 index 000000000000..f6c93c716898 --- /dev/null +++ b/arch/powerpc/include/asm/kdump.h @@ -0,0 +1,35 @@ +#ifndef _PPC64_KDUMP_H +#define _PPC64_KDUMP_H + +/* Kdump kernel runs at 32 MB, change at your peril. */ +#define KDUMP_KERNELBASE 0x2000000 + +/* How many bytes to reserve at zero for kdump. The reserve limit should + * be greater or equal to the trampoline's end address. + * Reserve to the end of the FWNMI area, see head_64.S */ +#define KDUMP_RESERVE_LIMIT 0x10000 /* 64K */ + +#ifdef CONFIG_CRASH_DUMP + +#define KDUMP_TRAMPOLINE_START 0x0100 +#define KDUMP_TRAMPOLINE_END 0x3000 + +#define KDUMP_MIN_TCE_ENTRIES 2048 + +#endif /* CONFIG_CRASH_DUMP */ + +#ifndef __ASSEMBLY__ +#ifdef CONFIG_CRASH_DUMP + +extern void reserve_kdump_trampoline(void); +extern void setup_kdump_trampoline(void); + +#else /* !CONFIG_CRASH_DUMP */ + +static inline void reserve_kdump_trampoline(void) { ; } +static inline void setup_kdump_trampoline(void) { ; } + +#endif /* CONFIG_CRASH_DUMP */ +#endif /* __ASSEMBLY__ */ + +#endif /* __PPC64_KDUMP_H */ diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h new file mode 100644 index 000000000000..acdcdc66f1b6 --- /dev/null +++ b/arch/powerpc/include/asm/kexec.h @@ -0,0 +1,160 @@ +#ifndef _ASM_POWERPC_KEXEC_H +#define _ASM_POWERPC_KEXEC_H +#ifdef __KERNEL__ + +/* + * Maximum page that is mapped directly into kernel memory. + * XXX: Since we copy virt we can use any page we allocate + */ +#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) + +/* + * Maximum address we can reach in physical address mode. + * XXX: I want to allow initrd in highmem. Otherwise set to rmo on LPAR. + */ +#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) + +/* Maximum address we can use for the control code buffer */ +#ifdef __powerpc64__ +#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL) +#else +/* TASK_SIZE, probably left over from use_mm ?? */ +#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE +#endif + +#define KEXEC_CONTROL_CODE_SIZE 4096 + +/* The native architecture */ +#ifdef __powerpc64__ +#define KEXEC_ARCH KEXEC_ARCH_PPC64 +#else +#define KEXEC_ARCH KEXEC_ARCH_PPC +#endif + +#ifndef __ASSEMBLY__ +#include + +typedef void (*crash_shutdown_t)(void); + +#ifdef CONFIG_KEXEC + +#ifdef __powerpc64__ +/* + * This function is responsible for capturing register states if coming + * via panic or invoking dump using sysrq-trigger. + */ +static inline void crash_setup_regs(struct pt_regs *newregs, + struct pt_regs *oldregs) +{ + if (oldregs) + memcpy(newregs, oldregs, sizeof(*newregs)); + else { + /* FIXME Merge this with xmon_save_regs ?? */ + unsigned long tmp1, tmp2; + __asm__ __volatile__ ( + "std 0,0(%2)\n" + "std 1,8(%2)\n" + "std 2,16(%2)\n" + "std 3,24(%2)\n" + "std 4,32(%2)\n" + "std 5,40(%2)\n" + "std 6,48(%2)\n" + "std 7,56(%2)\n" + "std 8,64(%2)\n" + "std 9,72(%2)\n" + "std 10,80(%2)\n" + "std 11,88(%2)\n" + "std 12,96(%2)\n" + "std 13,104(%2)\n" + "std 14,112(%2)\n" + "std 15,120(%2)\n" + "std 16,128(%2)\n" + "std 17,136(%2)\n" + "std 18,144(%2)\n" + "std 19,152(%2)\n" + "std 20,160(%2)\n" + "std 21,168(%2)\n" + "std 22,176(%2)\n" + "std 23,184(%2)\n" + "std 24,192(%2)\n" + "std 25,200(%2)\n" + "std 26,208(%2)\n" + "std 27,216(%2)\n" + "std 28,224(%2)\n" + "std 29,232(%2)\n" + "std 30,240(%2)\n" + "std 31,248(%2)\n" + "mfmsr %0\n" + "std %0, 264(%2)\n" + "mfctr %0\n" + "std %0, 280(%2)\n" + "mflr %0\n" + "std %0, 288(%2)\n" + "bl 1f\n" + "1: mflr %1\n" + "std %1, 256(%2)\n" + "mtlr %0\n" + "mfxer %0\n" + "std %0, 296(%2)\n" + : "=&r" (tmp1), "=&r" (tmp2) + : "b" (newregs) + : "memory"); + } +} +#else +/* + * Provide a dummy definition to avoid build failures. Will remain + * empty till crash dump support is enabled. + */ +static inline void crash_setup_regs(struct pt_regs *newregs, + struct pt_regs *oldregs) { } +#endif /* !__powerpc64 __ */ + +extern void kexec_smp_wait(void); /* get and clear naca physid, wait for + master to copy new code to 0 */ +extern int crashing_cpu; +extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)); +extern cpumask_t cpus_in_sr; +static inline int kexec_sr_activated(int cpu) +{ + return cpu_isset(cpu,cpus_in_sr); +} + +struct kimage; +struct pt_regs; +extern void default_machine_kexec(struct kimage *image); +extern int default_machine_kexec_prepare(struct kimage *image); +extern void default_machine_crash_shutdown(struct pt_regs *regs); +extern int crash_shutdown_register(crash_shutdown_t handler); +extern int crash_shutdown_unregister(crash_shutdown_t handler); + +extern void machine_kexec_simple(struct kimage *image); +extern void crash_kexec_secondary(struct pt_regs *regs); +extern int overlaps_crashkernel(unsigned long start, unsigned long size); +extern void reserve_crashkernel(void); + +#else /* !CONFIG_KEXEC */ +static inline int kexec_sr_activated(int cpu) { return 0; } +static inline void crash_kexec_secondary(struct pt_regs *regs) { } + +static inline int overlaps_crashkernel(unsigned long start, unsigned long size) +{ + return 0; +} + +static inline void reserve_crashkernel(void) { ; } + +static inline int crash_shutdown_register(crash_shutdown_t handler) +{ + return 0; +} + +static inline int crash_shutdown_unregister(crash_shutdown_t handler) +{ + return 0; +} + +#endif /* CONFIG_KEXEC */ +#endif /* ! __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_KEXEC_H */ diff --git a/arch/powerpc/include/asm/keylargo.h b/arch/powerpc/include/asm/keylargo.h new file mode 100644 index 000000000000..d8520ef121f9 --- /dev/null +++ b/arch/powerpc/include/asm/keylargo.h @@ -0,0 +1,261 @@ +#ifndef _ASM_POWERPC_KEYLARGO_H +#define _ASM_POWERPC_KEYLARGO_H +#ifdef __KERNEL__ +/* + * keylargo.h: definitions for using the "KeyLargo" I/O controller chip. + * + */ + +/* "Pangea" chipset has keylargo device-id 0x25 while core99 + * has device-id 0x22. The rev. of the pangea one is 0, so we + * fake an artificial rev. in keylargo_rev by oring 0x100 + */ +#define KL_PANGEA_REV 0x100 + +/* offset from base for feature control registers */ +#define KEYLARGO_MBCR 0x34 /* KL Only, Media bay control/status */ +#define KEYLARGO_FCR0 0x38 +#define KEYLARGO_FCR1 0x3c +#define KEYLARGO_FCR2 0x40 +#define KEYLARGO_FCR3 0x44 +#define KEYLARGO_FCR4 0x48 +#define KEYLARGO_FCR5 0x4c /* Pangea only */ + +/* K2 aditional FCRs */ +#define K2_FCR6 0x34 +#define K2_FCR7 0x30 +#define K2_FCR8 0x2c +#define K2_FCR9 0x28 +#define K2_FCR10 0x24 + +/* GPIO registers */ +#define KEYLARGO_GPIO_LEVELS0 0x50 +#define KEYLARGO_GPIO_LEVELS1 0x54 +#define KEYLARGO_GPIO_EXTINT_0 0x58 +#define KEYLARGO_GPIO_EXTINT_CNT 18 +#define KEYLARGO_GPIO_0 0x6A +#define KEYLARGO_GPIO_CNT 17 +#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE 0x80 +#define KEYLARGO_GPIO_OUTPUT_ENABLE 0x04 +#define KEYLARGO_GPIO_OUTOUT_DATA 0x01 +#define KEYLARGO_GPIO_INPUT_DATA 0x02 + +/* K2 does only extint GPIOs and does 51 of them */ +#define K2_GPIO_EXTINT_0 0x58 +#define K2_GPIO_EXTINT_CNT 51 + +/* Specific GPIO regs */ + +#define KL_GPIO_MODEM_RESET (KEYLARGO_GPIO_0+0x03) +#define KL_GPIO_MODEM_POWER (KEYLARGO_GPIO_0+0x02) /* Pangea */ + +#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05) + +/* Hrm... this one is only to be used on Pismo. It seeem to also + * control the timebase enable on other machines. Still to be + * experimented... --BenH. + */ +#define KL_GPIO_FW_CABLE_POWER (KEYLARGO_GPIO_0+0x09) +#define KL_GPIO_TB_ENABLE (KEYLARGO_GPIO_0+0x09) + +#define KL_GPIO_ETH_PHY_RESET (KEYLARGO_GPIO_0+0x10) + +#define KL_GPIO_EXTINT_CPU1 (KEYLARGO_GPIO_0+0x0a) +#define KL_GPIO_EXTINT_CPU1_ASSERT 0x04 +#define KL_GPIO_EXTINT_CPU1_RELEASE 0x38 + +#define KL_GPIO_RESET_CPU0 (KEYLARGO_GPIO_EXTINT_0+0x03) +#define KL_GPIO_RESET_CPU1 (KEYLARGO_GPIO_EXTINT_0+0x04) +#define KL_GPIO_RESET_CPU2 (KEYLARGO_GPIO_EXTINT_0+0x0f) +#define KL_GPIO_RESET_CPU3 (KEYLARGO_GPIO_EXTINT_0+0x10) + +#define KL_GPIO_PMU_MESSAGE_IRQ (KEYLARGO_GPIO_EXTINT_0+0x09) +#define KL_GPIO_PMU_MESSAGE_BIT KEYLARGO_GPIO_INPUT_DATA + +#define KL_GPIO_MEDIABAY_IRQ (KEYLARGO_GPIO_EXTINT_0+0x0e) + +#define KL_GPIO_AIRPORT_0 (KEYLARGO_GPIO_EXTINT_0+0x0a) +#define KL_GPIO_AIRPORT_1 (KEYLARGO_GPIO_EXTINT_0+0x0d) +#define KL_GPIO_AIRPORT_2 (KEYLARGO_GPIO_0+0x0d) +#define KL_GPIO_AIRPORT_3 (KEYLARGO_GPIO_0+0x0e) +#define KL_GPIO_AIRPORT_4 (KEYLARGO_GPIO_0+0x0f) + +/* + * Bits in feature control register. Those bits different for K2 are + * listed separately + */ +#define KL_MBCR_MB0_PCI_ENABLE 0x00000800 /* exist ? */ +#define KL_MBCR_MB0_IDE_ENABLE 0x00001000 +#define KL_MBCR_MB0_FLOPPY_ENABLE 0x00002000 /* exist ? */ +#define KL_MBCR_MB0_SOUND_ENABLE 0x00004000 /* hrm... */ +#define KL_MBCR_MB0_DEV_MASK 0x00007800 +#define KL_MBCR_MB0_DEV_POWER 0x00000400 +#define KL_MBCR_MB0_DEV_RESET 0x00000200 +#define KL_MBCR_MB0_ENABLE 0x00000100 +#define KL_MBCR_MB1_PCI_ENABLE 0x08000000 /* exist ? */ +#define KL_MBCR_MB1_IDE_ENABLE 0x10000000 +#define KL_MBCR_MB1_FLOPPY_ENABLE 0x20000000 /* exist ? */ +#define KL_MBCR_MB1_SOUND_ENABLE 0x40000000 /* hrm... */ +#define KL_MBCR_MB1_DEV_MASK 0x78000000 +#define KL_MBCR_MB1_DEV_POWER 0x04000000 +#define KL_MBCR_MB1_DEV_RESET 0x02000000 +#define KL_MBCR_MB1_ENABLE 0x01000000 + +#define KL0_SCC_B_INTF_ENABLE 0x00000001 /* (KL Only) */ +#define KL0_SCC_A_INTF_ENABLE 0x00000002 +#define KL0_SCC_SLOWPCLK 0x00000004 +#define KL0_SCC_RESET 0x00000008 +#define KL0_SCCA_ENABLE 0x00000010 +#define KL0_SCCB_ENABLE 0x00000020 +#define KL0_SCC_CELL_ENABLE 0x00000040 +#define KL0_IRDA_HIGH_BAND 0x00000100 /* (KL Only) */ +#define KL0_IRDA_SOURCE2_SEL 0x00000200 /* (KL Only) */ +#define KL0_IRDA_SOURCE1_SEL 0x00000400 /* (KL Only) */ +#define KL0_PG_USB0_PMI_ENABLE 0x00000400 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_RESET 0x00000800 /* (KL Only) */ +#define KL0_PG_USB0_REF_SUSPEND_SEL 0x00000800 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_DEFAULT1 0x00001000 /* (KL Only) */ +#define KL0_PG_USB0_REF_SUSPEND 0x00001000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_DEFAULT0 0x00002000 /* (KL Only) */ +#define KL0_PG_USB0_PAD_SUSPEND 0x00002000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_FAST_CONNECT 0x00004000 /* (KL Only) */ +#define KL0_PG_USB1_PMI_ENABLE 0x00004000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_ENABLE 0x00008000 /* (KL Only) */ +#define KL0_PG_USB1_REF_SUSPEND_SEL 0x00008000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_CLK32_ENABLE 0x00010000 /* (KL Only) */ +#define KL0_PG_USB1_REF_SUSPEND 0x00010000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_CLK19_ENABLE 0x00020000 /* (KL Only) */ +#define KL0_PG_USB1_PAD_SUSPEND 0x00020000 /* (Pangea/Intrepid Only) */ +#define KL0_USB0_PAD_SUSPEND0 0x00040000 +#define KL0_USB0_PAD_SUSPEND1 0x00080000 +#define KL0_USB0_CELL_ENABLE 0x00100000 +#define KL0_USB1_PAD_SUSPEND0 0x00400000 +#define KL0_USB1_PAD_SUSPEND1 0x00800000 +#define KL0_USB1_CELL_ENABLE 0x01000000 +#define KL0_USB_REF_SUSPEND 0x10000000 /* (KL Only) */ + +#define KL0_SERIAL_ENABLE (KL0_SCC_B_INTF_ENABLE | \ + KL0_SCC_SLOWPCLK | \ + KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE) + +#define KL1_USB2_PMI_ENABLE 0x00000001 /* Intrepid only */ +#define KL1_AUDIO_SEL_22MCLK 0x00000002 /* KL/Pangea only */ +#define KL1_USB2_REF_SUSPEND_SEL 0x00000002 /* Intrepid only */ +#define KL1_USB2_REF_SUSPEND 0x00000004 /* Intrepid only */ +#define KL1_AUDIO_CLK_ENABLE_BIT 0x00000008 /* KL/Pangea only */ +#define KL1_USB2_PAD_SUSPEND_SEL 0x00000008 /* Intrepid only */ +#define KL1_USB2_PAD_SUSPEND0 0x00000010 /* Intrepid only */ +#define KL1_AUDIO_CLK_OUT_ENABLE 0x00000020 /* KL/Pangea only */ +#define KL1_USB2_PAD_SUSPEND1 0x00000020 /* Intrepid only */ +#define KL1_AUDIO_CELL_ENABLE 0x00000040 /* KL/Pangea only */ +#define KL1_USB2_CELL_ENABLE 0x00000040 /* Intrepid only */ +#define KL1_AUDIO_CHOOSE 0x00000080 /* KL/Pangea only */ +#define KL1_I2S0_CHOOSE 0x00000200 /* KL Only */ +#define KL1_I2S0_CELL_ENABLE 0x00000400 +#define KL1_I2S0_CLK_ENABLE_BIT 0x00001000 +#define KL1_I2S0_ENABLE 0x00002000 +#define KL1_I2S1_CELL_ENABLE 0x00020000 +#define KL1_I2S1_CLK_ENABLE_BIT 0x00080000 +#define KL1_I2S1_ENABLE 0x00100000 +#define KL1_EIDE0_ENABLE 0x00800000 /* KL/Intrepid Only */ +#define KL1_EIDE0_RESET_N 0x01000000 /* KL/Intrepid Only */ +#define KL1_EIDE1_ENABLE 0x04000000 /* KL Only */ +#define KL1_EIDE1_RESET_N 0x08000000 /* KL Only */ +#define KL1_UIDE_ENABLE 0x20000000 /* KL/Pangea Only */ +#define KL1_UIDE_RESET_N 0x40000000 /* KL/Pangea Only */ + +#define KL2_IOBUS_ENABLE 0x00000002 +#define KL2_SLEEP_STATE_BIT 0x00000100 /* KL Only */ +#define KL2_PG_STOP_ALL_CLOCKS 0x00000100 /* Pangea Only */ +#define KL2_MPIC_ENABLE 0x00020000 +#define KL2_CARDSLOT_RESET 0x00040000 /* Pangea/Intrepid Only */ +#define KL2_ALT_DATA_OUT 0x02000000 /* KL Only ??? */ +#define KL2_MEM_IS_BIG 0x04000000 +#define KL2_CARDSEL_16 0x08000000 + +#define KL3_SHUTDOWN_PLL_TOTAL 0x00000001 /* KL/Pangea only */ +#define KL3_SHUTDOWN_PLLKW6 0x00000002 /* KL/Pangea only */ +#define KL3_IT_SHUTDOWN_PLL3 0x00000002 /* Intrepid only */ +#define KL3_SHUTDOWN_PLLKW4 0x00000004 /* KL/Pangea only */ +#define KL3_IT_SHUTDOWN_PLL2 0x00000004 /* Intrepid only */ +#define KL3_SHUTDOWN_PLLKW35 0x00000008 /* KL/Pangea only */ +#define KL3_IT_SHUTDOWN_PLL1 0x00000008 /* Intrepid only */ +#define KL3_SHUTDOWN_PLLKW12 0x00000010 /* KL Only */ +#define KL3_IT_ENABLE_PLL3_SHUTDOWN 0x00000010 /* Intrepid only */ +#define KL3_PLL_RESET 0x00000020 /* KL/Pangea only */ +#define KL3_IT_ENABLE_PLL2_SHUTDOWN 0x00000020 /* Intrepid only */ +#define KL3_IT_ENABLE_PLL1_SHUTDOWN 0x00000010 /* Intrepid only */ +#define KL3_SHUTDOWN_PLL2X 0x00000080 /* KL Only */ +#define KL3_CLK66_ENABLE 0x00000100 /* KL Only */ +#define KL3_CLK49_ENABLE 0x00000200 +#define KL3_CLK45_ENABLE 0x00000400 +#define KL3_CLK31_ENABLE 0x00000800 /* KL/Pangea only */ +#define KL3_TIMER_CLK18_ENABLE 0x00001000 +#define KL3_I2S1_CLK18_ENABLE 0x00002000 +#define KL3_I2S0_CLK18_ENABLE 0x00004000 +#define KL3_VIA_CLK16_ENABLE 0x00008000 /* KL/Pangea only */ +#define KL3_IT_VIA_CLK32_ENABLE 0x00008000 /* Intrepid only */ +#define KL3_STOPPING33_ENABLED 0x00080000 /* KL Only */ +#define KL3_PG_PLL_ENABLE_TEST 0x00080000 /* Pangea Only */ + +/* Intrepid USB bus 2, port 0,1 */ +#define KL3_IT_PORT_WAKEUP_ENABLE(p) (0x00080000 << ((p)<<3)) +#define KL3_IT_PORT_RESUME_WAKE_EN(p) (0x00040000 << ((p)<<3)) +#define KL3_IT_PORT_CONNECT_WAKE_EN(p) (0x00020000 << ((p)<<3)) +#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p) (0x00010000 << ((p)<<3)) +#define KL3_IT_PORT_RESUME_STAT(p) (0x00300000 << ((p)<<3)) +#define KL3_IT_PORT_CONNECT_STAT(p) (0x00200000 << ((p)<<3)) +#define KL3_IT_PORT_DISCONNECT_STAT(p) (0x00100000 << ((p)<<3)) + +/* Port 0,1 : bus 0, port 2,3 : bus 1 */ +#define KL4_PORT_WAKEUP_ENABLE(p) (0x00000008 << ((p)<<3)) +#define KL4_PORT_RESUME_WAKE_EN(p) (0x00000004 << ((p)<<3)) +#define KL4_PORT_CONNECT_WAKE_EN(p) (0x00000002 << ((p)<<3)) +#define KL4_PORT_DISCONNECT_WAKE_EN(p) (0x00000001 << ((p)<<3)) +#define KL4_PORT_RESUME_STAT(p) (0x00000040 << ((p)<<3)) +#define KL4_PORT_CONNECT_STAT(p) (0x00000020 << ((p)<<3)) +#define KL4_PORT_DISCONNECT_STAT(p) (0x00000010 << ((p)<<3)) + +/* Pangea and Intrepid only */ +#define KL5_VIA_USE_CLK31 0000000001 /* Pangea Only */ +#define KL5_SCC_USE_CLK31 0x00000002 /* Pangea Only */ +#define KL5_PWM_CLK32_EN 0x00000004 +#define KL5_CLK3_68_EN 0x00000010 +#define KL5_CLK32_EN 0x00000020 + + +/* K2 definitions */ +#define K2_FCR0_USB0_SWRESET 0x00200000 +#define K2_FCR0_USB1_SWRESET 0x02000000 +#define K2_FCR0_RING_PME_DISABLE 0x08000000 + +#define K2_FCR1_PCI1_BUS_RESET_N 0x00000010 +#define K2_FCR1_PCI1_SLEEP_RESET_EN 0x00000020 +#define K2_FCR1_I2S0_CELL_ENABLE 0x00000400 +#define K2_FCR1_I2S0_RESET 0x00000800 +#define K2_FCR1_I2S0_CLK_ENABLE_BIT 0x00001000 +#define K2_FCR1_I2S0_ENABLE 0x00002000 +#define K2_FCR1_PCI1_CLK_ENABLE 0x00004000 +#define K2_FCR1_FW_CLK_ENABLE 0x00008000 +#define K2_FCR1_FW_RESET_N 0x00010000 +#define K2_FCR1_I2S1_CELL_ENABLE 0x00020000 +#define K2_FCR1_I2S1_CLK_ENABLE_BIT 0x00080000 +#define K2_FCR1_I2S1_ENABLE 0x00100000 +#define K2_FCR1_GMAC_CLK_ENABLE 0x00400000 +#define K2_FCR1_GMAC_POWER_DOWN 0x00800000 +#define K2_FCR1_GMAC_RESET_N 0x01000000 +#define K2_FCR1_SATA_CLK_ENABLE 0x02000000 +#define K2_FCR1_SATA_POWER_DOWN 0x04000000 +#define K2_FCR1_SATA_RESET_N 0x08000000 +#define K2_FCR1_UATA_CLK_ENABLE 0x10000000 +#define K2_FCR1_UATA_RESET_N 0x40000000 +#define K2_FCR1_UATA_CHOOSE_CLK66 0x80000000 + +/* Shasta definitions */ +#define SH_FCR1_I2S2_CELL_ENABLE 0x00000010 +#define SH_FCR1_I2S2_CLK_ENABLE_BIT 0x00000040 +#define SH_FCR1_I2S2_ENABLE 0x00000080 +#define SH_FCR3_I2S2_CLK18_ENABLE 0x00008000 + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_KEYLARGO_H */ diff --git a/arch/powerpc/include/asm/kgdb.h b/arch/powerpc/include/asm/kgdb.h new file mode 100644 index 000000000000..edd217006d27 --- /dev/null +++ b/arch/powerpc/include/asm/kgdb.h @@ -0,0 +1,63 @@ +/* + * The PowerPC (32/64) specific defines / externs for KGDB. Based on + * the previous 32bit and 64bit specific files, which had the following + * copyrights: + * + * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com) + * PPC Mods (C) 2004 Tom Rini (trini@mvista.com) + * PPC Mods (C) 2003 John Whitney (john.whitney@timesys.com) + * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu) + * + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Author: Tom Rini + * + * 2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifdef __KERNEL__ +#ifndef __POWERPC_KGDB_H__ +#define __POWERPC_KGDB_H__ + +#ifndef __ASSEMBLY__ + +#define BREAK_INSTR_SIZE 4 +#define BUFMAX ((NUMREGBYTES * 2) + 512) +#define OUTBUFMAX ((NUMREGBYTES * 2) + 512) +static inline void arch_kgdb_breakpoint(void) +{ + asm(".long 0x7d821008"); /* twge r2, r2 */ +} +#define CACHE_FLUSH_IS_SAFE 1 + +/* The number bytes of registers we have to save depends on a few + * things. For 64bit we default to not including vector registers and + * vector state registers. */ +#ifdef CONFIG_PPC64 +/* + * 64 bit (8 byte) registers: + * 32 gpr, 32 fpr, nip, msr, link, ctr + * 32 bit (4 byte) registers: + * ccr, xer, fpscr + */ +#define NUMREGBYTES ((68 * 8) + (3 * 4)) +#define NUMCRITREGBYTES 184 +#else /* CONFIG_PPC32 */ +/* On non-E500 family PPC32 we determine the size by picking the last + * register we need, but on E500 we skip sections so we list what we + * need to store, and add it up. */ +#ifndef CONFIG_E500 +#define MAXREG (PT_FPSCR+1) +#else +/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/ +#define MAXREG ((32*2)+6+2+1) +#endif +#define NUMREGBYTES (MAXREG * sizeof(int)) +/* CR/LR, R1, R2, R13-R31 inclusive. */ +#define NUMCRITREGBYTES (23 * sizeof(int)) +#endif /* 32/64 */ +#endif /* !(__ASSEMBLY__) */ +#endif /* !__POWERPC_KGDB_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/kmap_types.h b/arch/powerpc/include/asm/kmap_types.h new file mode 100644 index 000000000000..b6bac6f61c16 --- /dev/null +++ b/arch/powerpc/include/asm/kmap_types.h @@ -0,0 +1,33 @@ +#ifndef _ASM_POWERPC_KMAP_TYPES_H +#define _ASM_POWERPC_KMAP_TYPES_H + +#ifdef __KERNEL__ + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_PPC_SYNC_PAGE, + KM_PPC_SYNC_ICACHE, + KM_TYPE_NR +}; + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_KMAP_TYPES_H */ diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h new file mode 100644 index 000000000000..d0e7701fa1f6 --- /dev/null +++ b/arch/powerpc/include/asm/kprobes.h @@ -0,0 +1,118 @@ +#ifndef _ASM_POWERPC_KPROBES_H +#define _ASM_POWERPC_KPROBES_H +#ifdef __KERNEL__ +/* + * Kernel Probes (KProbes) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2002, 2004 + * + * 2002-Oct Created by Vamsi Krishna S Kernel + * Probes initial implementation ( includes suggestions from + * Rusty Russell). + * 2004-Nov Modified for PPC64 by Ananth N Mavinakayanahalli + * + */ +#include +#include +#include + +#define __ARCH_WANT_KPROBES_INSN_SLOT + +struct pt_regs; +struct kprobe; + +typedef unsigned int kprobe_opcode_t; +#define BREAKPOINT_INSTRUCTION 0x7fe00008 /* trap */ +#define MAX_INSN_SIZE 1 + +#define IS_TW(instr) (((instr) & 0xfc0007fe) == 0x7c000008) +#define IS_TD(instr) (((instr) & 0xfc0007fe) == 0x7c000088) +#define IS_TDI(instr) (((instr) & 0xfc000000) == 0x08000000) +#define IS_TWI(instr) (((instr) & 0xfc000000) == 0x0c000000) + +#ifdef CONFIG_PPC64 +/* + * 64bit powerpc uses function descriptors. + * Handle cases where: + * - User passes a <.symbol> or + * - User passes a or + * - User passes a non-existant symbol, kallsyms_lookup_name + * returns 0. Don't deref the NULL pointer in that case + */ +#define kprobe_lookup_name(name, addr) \ +{ \ + addr = (kprobe_opcode_t *)kallsyms_lookup_name(name); \ + if (addr) { \ + char *colon; \ + if ((colon = strchr(name, ':')) != NULL) { \ + colon++; \ + if (*colon != '\0' && *colon != '.') \ + addr = *(kprobe_opcode_t **)addr; \ + } else if (name[0] != '.') \ + addr = *(kprobe_opcode_t **)addr; \ + } else { \ + char dot_name[KSYM_NAME_LEN]; \ + dot_name[0] = '.'; \ + dot_name[1] = '\0'; \ + strncat(dot_name, name, KSYM_NAME_LEN - 2); \ + addr = (kprobe_opcode_t *)kallsyms_lookup_name(dot_name); \ + } \ +} + +#define is_trap(instr) (IS_TW(instr) || IS_TD(instr) || \ + IS_TWI(instr) || IS_TDI(instr)) +#else +/* Use stock kprobe_lookup_name since ppc32 doesn't use function descriptors */ +#define is_trap(instr) (IS_TW(instr) || IS_TWI(instr)) +#endif + +#define flush_insn_slot(p) do { } while (0) +#define kretprobe_blacklist_size 0 + +void kretprobe_trampoline(void); +extern void arch_remove_kprobe(struct kprobe *p); + +/* Architecture specific copy of original instruction */ +struct arch_specific_insn { + /* copy of original instruction */ + kprobe_opcode_t *insn; + /* + * Set in kprobes code, initially to 0. If the instruction can be + * eumulated, this is set to 1, if not, to -1. + */ + int boostable; +}; + +struct prev_kprobe { + struct kprobe *kp; + unsigned long status; + unsigned long saved_msr; +}; + +/* per-cpu kprobe control block */ +struct kprobe_ctlblk { + unsigned long kprobe_status; + unsigned long kprobe_saved_msr; + struct pt_regs jprobe_saved_regs; + struct prev_kprobe prev_kprobe; +}; + +extern int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); +extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr); +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_KPROBES_H */ diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h new file mode 100644 index 000000000000..f993e4198d5c --- /dev/null +++ b/arch/powerpc/include/asm/kvm.h @@ -0,0 +1,55 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2007 + * + * Authors: Hollis Blanchard + */ + +#ifndef __LINUX_KVM_POWERPC_H +#define __LINUX_KVM_POWERPC_H + +#include + +struct kvm_regs { + __u64 pc; + __u64 cr; + __u64 ctr; + __u64 lr; + __u64 xer; + __u64 msr; + __u64 srr0; + __u64 srr1; + __u64 pid; + + __u64 sprg0; + __u64 sprg1; + __u64 sprg2; + __u64 sprg3; + __u64 sprg4; + __u64 sprg5; + __u64 sprg6; + __u64 sprg7; + + __u64 gpr[32]; +}; + +struct kvm_sregs { +}; + +struct kvm_fpu { + __u64 fpr[32]; +}; + +#endif /* __LINUX_KVM_POWERPC_H */ diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h new file mode 100644 index 000000000000..2197764796d9 --- /dev/null +++ b/arch/powerpc/include/asm/kvm_asm.h @@ -0,0 +1,55 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2008 + * + * Authors: Hollis Blanchard + */ + +#ifndef __POWERPC_KVM_ASM_H__ +#define __POWERPC_KVM_ASM_H__ + +/* IVPR must be 64KiB-aligned. */ +#define VCPU_SIZE_ORDER 4 +#define VCPU_SIZE_LOG (VCPU_SIZE_ORDER + 12) +#define VCPU_TLB_PGSZ PPC44x_TLB_64K +#define VCPU_SIZE_BYTES (1< + */ + +#ifndef __POWERPC_KVM_HOST_H__ +#define __POWERPC_KVM_HOST_H__ + +#include +#include +#include +#include +#include + +#define KVM_MAX_VCPUS 1 +#define KVM_MEMORY_SLOTS 32 +/* memory slots that does not exposed to userspace */ +#define KVM_PRIVATE_MEM_SLOTS 4 + +#define KVM_COALESCED_MMIO_PAGE_OFFSET 1 + +/* We don't currently support large pages. */ +#define KVM_PAGES_PER_HPAGE (1<<31) + +struct kvm; +struct kvm_run; +struct kvm_vcpu; + +struct kvm_vm_stat { + u32 remote_tlb_flush; +}; + +struct kvm_vcpu_stat { + u32 sum_exits; + u32 mmio_exits; + u32 dcr_exits; + u32 signal_exits; + u32 light_exits; + /* Account for special types of light exits: */ + u32 itlb_real_miss_exits; + u32 itlb_virt_miss_exits; + u32 dtlb_real_miss_exits; + u32 dtlb_virt_miss_exits; + u32 syscall_exits; + u32 isi_exits; + u32 dsi_exits; + u32 emulated_inst_exits; + u32 dec_exits; + u32 ext_intr_exits; + u32 halt_wakeup; +}; + +struct tlbe { + u32 tid; /* Only the low 8 bits are used. */ + u32 word0; + u32 word1; + u32 word2; +}; + +struct kvm_arch { +}; + +struct kvm_vcpu_arch { + /* Unmodified copy of the guest's TLB. */ + struct tlbe guest_tlb[PPC44x_TLB_SIZE]; + /* TLB that's actually used when the guest is running. */ + struct tlbe shadow_tlb[PPC44x_TLB_SIZE]; + /* Pages which are referenced in the shadow TLB. */ + struct page *shadow_pages[PPC44x_TLB_SIZE]; + /* Copy of the host's TLB. */ + struct tlbe host_tlb[PPC44x_TLB_SIZE]; + + u32 host_stack; + u32 host_pid; + + u64 fpr[32]; + u32 gpr[32]; + + u32 pc; + u32 cr; + u32 ctr; + u32 lr; + u32 xer; + + u32 msr; + u32 mmucr; + u32 sprg0; + u32 sprg1; + u32 sprg2; + u32 sprg3; + u32 sprg4; + u32 sprg5; + u32 sprg6; + u32 sprg7; + u32 srr0; + u32 srr1; + u32 csrr0; + u32 csrr1; + u32 dsrr0; + u32 dsrr1; + u32 dear; + u32 esr; + u32 dec; + u32 decar; + u32 tbl; + u32 tbu; + u32 tcr; + u32 tsr; + u32 ivor[16]; + u32 ivpr; + u32 pir; + u32 pid; + u32 pvr; + u32 ccr0; + u32 ccr1; + u32 dbcr0; + u32 dbcr1; + + u32 last_inst; + u32 fault_dear; + u32 fault_esr; + gpa_t paddr_accessed; + + u8 io_gpr; /* GPR used as IO source/target */ + u8 mmio_is_bigendian; + u8 dcr_needed; + u8 dcr_is_write; + + u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */ + + struct timer_list dec_timer; + unsigned long pending_exceptions; +}; + +struct kvm_guest_debug { + int enabled; + unsigned long bp[4]; + int singlestep; +}; + +#endif /* __POWERPC_KVM_HOST_H__ */ diff --git a/arch/powerpc/include/asm/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h new file mode 100644 index 000000000000..2d48f6a63d0b --- /dev/null +++ b/arch/powerpc/include/asm/kvm_para.h @@ -0,0 +1,37 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2008 + * + * Authors: Hollis Blanchard + */ + +#ifndef __POWERPC_KVM_PARA_H__ +#define __POWERPC_KVM_PARA_H__ + +#ifdef __KERNEL__ + +static inline int kvm_para_available(void) +{ + return 0; +} + +static inline unsigned int kvm_arch_para_features(void) +{ + return 0; +} + +#endif /* __KERNEL__ */ + +#endif /* __POWERPC_KVM_PARA_H__ */ diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h new file mode 100644 index 000000000000..a8b068792260 --- /dev/null +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -0,0 +1,95 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2008 + * + * Authors: Hollis Blanchard + */ + +#ifndef __POWERPC_KVM_PPC_H__ +#define __POWERPC_KVM_PPC_H__ + +/* This file exists just so we can dereference kvm_vcpu, avoiding nested header + * dependencies. */ + +#include +#include +#include +#include +#include + +struct kvm_tlb { + struct tlbe guest_tlb[PPC44x_TLB_SIZE]; + struct tlbe shadow_tlb[PPC44x_TLB_SIZE]; +}; + +enum emulation_result { + EMULATE_DONE, /* no further processing */ + EMULATE_DO_MMIO, /* kvm_run filled with MMIO request */ + EMULATE_DO_DCR, /* kvm_run filled with DCR request */ + EMULATE_FAIL, /* can't emulate this instruction */ +}; + +extern const unsigned char exception_priority[]; +extern const unsigned char priority_exception[]; + +extern int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu); +extern char kvmppc_handlers_start[]; +extern unsigned long kvmppc_handler_len; + +extern void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu); +extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu, + unsigned int rt, unsigned int bytes, + int is_bigendian); +extern int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu, + u32 val, unsigned int bytes, int is_bigendian); + +extern int kvmppc_emulate_instruction(struct kvm_run *run, + struct kvm_vcpu *vcpu); +extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu); + +extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, + u64 asid, u32 flags); +extern void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr, + gva_t eend, u32 asid); +extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode); + +extern void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu); + +static inline void kvmppc_queue_exception(struct kvm_vcpu *vcpu, int exception) +{ + unsigned int priority = exception_priority[exception]; + set_bit(priority, &vcpu->arch.pending_exceptions); +} + +static inline void kvmppc_clear_exception(struct kvm_vcpu *vcpu, int exception) +{ + unsigned int priority = exception_priority[exception]; + clear_bit(priority, &vcpu->arch.pending_exceptions); +} + +/* Helper function for "full" MSR writes. No need to call this if only EE is + * changing. */ +static inline void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr) +{ + if ((new_msr & MSR_PR) != (vcpu->arch.msr & MSR_PR)) + kvmppc_mmu_priv_switch(vcpu, new_msr & MSR_PR); + + vcpu->arch.msr = new_msr; + + if (vcpu->arch.msr & MSR_WE) + kvm_vcpu_block(vcpu); +} + +#endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/arch/powerpc/include/asm/libata-portmap.h b/arch/powerpc/include/asm/libata-portmap.h new file mode 100644 index 000000000000..4d8518049f4d --- /dev/null +++ b/arch/powerpc/include/asm/libata-portmap.h @@ -0,0 +1,12 @@ +#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H +#define __ASM_POWERPC_LIBATA_PORTMAP_H + +#define ATA_PRIMARY_CMD 0x1F0 +#define ATA_PRIMARY_CTL 0x3F6 +#define ATA_PRIMARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 0) + +#define ATA_SECONDARY_CMD 0x170 +#define ATA_SECONDARY_CTL 0x376 +#define ATA_SECONDARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 1) + +#endif diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/asm/linkage.h new file mode 100644 index 000000000000..e1c4ac1cc4ba --- /dev/null +++ b/arch/powerpc/include/asm/linkage.h @@ -0,0 +1,6 @@ +#ifndef _ASM_POWERPC_LINKAGE_H +#define _ASM_POWERPC_LINKAGE_H + +/* Nothing to see here... */ + +#endif /* _ASM_POWERPC_LINKAGE_H */ diff --git a/arch/powerpc/include/asm/lmb.h b/arch/powerpc/include/asm/lmb.h new file mode 100644 index 000000000000..6f5fdf0a19ae --- /dev/null +++ b/arch/powerpc/include/asm/lmb.h @@ -0,0 +1,15 @@ +#ifndef _ASM_POWERPC_LMB_H +#define _ASM_POWERPC_LMB_H + +#include + +#define LMB_DBG(fmt...) udbg_printf(fmt) + +#ifdef CONFIG_PPC32 +extern phys_addr_t lowmem_end_addr; +#define LMB_REAL_LIMIT lowmem_end_addr +#else +#define LMB_REAL_LIMIT 0 +#endif + +#endif /* _ASM_POWERPC_LMB_H */ diff --git a/arch/powerpc/include/asm/local.h b/arch/powerpc/include/asm/local.h new file mode 100644 index 000000000000..612d83276653 --- /dev/null +++ b/arch/powerpc/include/asm/local.h @@ -0,0 +1,200 @@ +#ifndef _ARCH_POWERPC_LOCAL_H +#define _ARCH_POWERPC_LOCAL_H + +#include +#include + +typedef struct +{ + atomic_long_t a; +} local_t; + +#define LOCAL_INIT(i) { ATOMIC_LONG_INIT(i) } + +#define local_read(l) atomic_long_read(&(l)->a) +#define local_set(l,i) atomic_long_set(&(l)->a, (i)) + +#define local_add(i,l) atomic_long_add((i),(&(l)->a)) +#define local_sub(i,l) atomic_long_sub((i),(&(l)->a)) +#define local_inc(l) atomic_long_inc(&(l)->a) +#define local_dec(l) atomic_long_dec(&(l)->a) + +static __inline__ long local_add_return(long a, local_t *l) +{ + long t; + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%2 # local_add_return\n\ + add %0,%1,%0\n" + PPC405_ERR77(0,%2) + PPC_STLCX "%0,0,%2 \n\ + bne- 1b" + : "=&r" (t) + : "r" (a), "r" (&(l->a.counter)) + : "cc", "memory"); + + return t; +} + +#define local_add_negative(a, l) (local_add_return((a), (l)) < 0) + +static __inline__ long local_sub_return(long a, local_t *l) +{ + long t; + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%2 # local_sub_return\n\ + subf %0,%1,%0\n" + PPC405_ERR77(0,%2) + PPC_STLCX "%0,0,%2 \n\ + bne- 1b" + : "=&r" (t) + : "r" (a), "r" (&(l->a.counter)) + : "cc", "memory"); + + return t; +} + +static __inline__ long local_inc_return(local_t *l) +{ + long t; + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%1 # local_inc_return\n\ + addic %0,%0,1\n" + PPC405_ERR77(0,%1) + PPC_STLCX "%0,0,%1 \n\ + bne- 1b" + : "=&r" (t) + : "r" (&(l->a.counter)) + : "cc", "memory"); + + return t; +} + +/* + * local_inc_and_test - increment and test + * @l: pointer of type local_t + * + * Atomically increments @l by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define local_inc_and_test(l) (local_inc_return(l) == 0) + +static __inline__ long local_dec_return(local_t *l) +{ + long t; + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%1 # local_dec_return\n\ + addic %0,%0,-1\n" + PPC405_ERR77(0,%1) + PPC_STLCX "%0,0,%1\n\ + bne- 1b" + : "=&r" (t) + : "r" (&(l->a.counter)) + : "cc", "memory"); + + return t; +} + +#define local_cmpxchg(l, o, n) \ + (cmpxchg_local(&((l)->a.counter), (o), (n))) +#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n))) + +/** + * local_add_unless - add unless the number is a given value + * @l: pointer of type local_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @l, so long as it was not @u. + * Returns non-zero if @l was not @u, and zero otherwise. + */ +static __inline__ int local_add_unless(local_t *l, long a, long u) +{ + long t; + + __asm__ __volatile__ ( +"1:" PPC_LLARX "%0,0,%1 # local_add_unless\n\ + cmpw 0,%0,%3 \n\ + beq- 2f \n\ + add %0,%2,%0 \n" + PPC405_ERR77(0,%2) + PPC_STLCX "%0,0,%1 \n\ + bne- 1b \n" +" subf %0,%2,%0 \n\ +2:" + : "=&r" (t) + : "r" (&(l->a.counter)), "r" (a), "r" (u) + : "cc", "memory"); + + return t != u; +} + +#define local_inc_not_zero(l) local_add_unless((l), 1, 0) + +#define local_sub_and_test(a, l) (local_sub_return((a), (l)) == 0) +#define local_dec_and_test(l) (local_dec_return((l)) == 0) + +/* + * Atomically test *l and decrement if it is greater than 0. + * The function returns the old value of *l minus 1. + */ +static __inline__ long local_dec_if_positive(local_t *l) +{ + long t; + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%1 # local_dec_if_positive\n\ + cmpwi %0,1\n\ + addi %0,%0,-1\n\ + blt- 2f\n" + PPC405_ERR77(0,%1) + PPC_STLCX "%0,0,%1\n\ + bne- 1b" + "\n\ +2:" : "=&b" (t) + : "r" (&(l->a.counter)) + : "cc", "memory"); + + return t; +} + +/* Use these for per-cpu local_t variables: on some archs they are + * much more efficient than these naive implementations. Note they take + * a variable, not an address. + */ + +#define __local_inc(l) ((l)->a.counter++) +#define __local_dec(l) ((l)->a.counter++) +#define __local_add(i,l) ((l)->a.counter+=(i)) +#define __local_sub(i,l) ((l)->a.counter-=(i)) + +/* Need to disable preemption for the cpu local counters otherwise we could + still access a variable of a previous CPU in a non atomic way. */ +#define cpu_local_wrap_v(l) \ + ({ local_t res__; \ + preempt_disable(); \ + res__ = (l); \ + preempt_enable(); \ + res__; }) +#define cpu_local_wrap(l) \ + ({ preempt_disable(); \ + l; \ + preempt_enable(); }) \ + +#define cpu_local_read(l) cpu_local_wrap_v(local_read(&__get_cpu_var(l))) +#define cpu_local_set(l, i) cpu_local_wrap(local_set(&__get_cpu_var(l), (i))) +#define cpu_local_inc(l) cpu_local_wrap(local_inc(&__get_cpu_var(l))) +#define cpu_local_dec(l) cpu_local_wrap(local_dec(&__get_cpu_var(l))) +#define cpu_local_add(i, l) cpu_local_wrap(local_add((i), &__get_cpu_var(l))) +#define cpu_local_sub(i, l) cpu_local_wrap(local_sub((i), &__get_cpu_var(l))) + +#define __cpu_local_inc(l) cpu_local_inc(l) +#define __cpu_local_dec(l) cpu_local_dec(l) +#define __cpu_local_add(i, l) cpu_local_add((i), (l)) +#define __cpu_local_sub(i, l) cpu_local_sub((i), (l)) + +#endif /* _ARCH_POWERPC_LOCAL_H */ diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h new file mode 100644 index 000000000000..2fe268b10333 --- /dev/null +++ b/arch/powerpc/include/asm/lppaca.h @@ -0,0 +1,159 @@ +/* + * lppaca.h + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_LPPACA_H +#define _ASM_POWERPC_LPPACA_H +#ifdef __KERNEL__ + +//============================================================================= +// +// This control block contains the data that is shared between the +// hypervisor (PLIC) and the OS. +// +// +//---------------------------------------------------------------------------- +#include +#include +#include + +/* The Hypervisor barfs if the lppaca crosses a page boundary. A 1k + * alignment is sufficient to prevent this */ +struct lppaca { +//============================================================================= +// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data +// NOTE: The xDynXyz fields are fields that will be dynamically changed by +// PLIC when preparing to bring a processor online or when dispatching a +// virtual processor! +//============================================================================= + u32 desc; // Eye catcher 0xD397D781 x00-x03 + u16 size; // Size of this struct x04-x05 + u16 reserved1; // Reserved x06-x07 + u16 reserved2:14; // Reserved x08-x09 + u8 shared_proc:1; // Shared processor indicator ... + u8 secondary_thread:1; // Secondary thread indicator ... + volatile u8 dyn_proc_status:8; // Dynamic Status of this proc x0A-x0A + u8 secondary_thread_count; // Secondary thread count x0B-x0B + volatile u16 dyn_hv_phys_proc_index;// Dynamic HV Physical Proc Index0C-x0D + volatile u16 dyn_hv_log_proc_index;// Dynamic HV Logical Proc Indexx0E-x0F + u32 decr_val; // Value for Decr programming x10-x13 + u32 pmc_val; // Value for PMC regs x14-x17 + volatile u32 dyn_hw_node_id; // Dynamic Hardware Node id x18-x1B + volatile u32 dyn_hw_proc_id; // Dynamic Hardware Proc Id x1C-x1F + volatile u32 dyn_pir; // Dynamic ProcIdReg value x20-x23 + u32 dsei_data; // DSEI data x24-x27 + u64 sprg3; // SPRG3 value x28-x2F + u8 reserved3[80]; // Reserved x30-x7F + +//============================================================================= +// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data +//============================================================================= + // This Dword contains a byte for each type of interrupt that can occur. + // The IPI is a count while the others are just a binary 1 or 0. + union { + u64 any_int; + struct { + u16 reserved; // Reserved - cleared by #mpasmbl + u8 xirr_int; // Indicates xXirrValue is valid or Immed IO + u8 ipi_cnt; // IPI Count + u8 decr_int; // DECR interrupt occurred + u8 pdc_int; // PDC interrupt occurred + u8 quantum_int; // Interrupt quantum reached + u8 old_plic_deferred_ext_int; // Old PLIC has a deferred XIRR pending + } fields; + } int_dword; + + // Whenever any fields in this Dword are set then PLIC will defer the + // processing of external interrupts. Note that PLIC will store the + // XIRR directly into the xXirrValue field so that another XIRR will + // not be presented until this one clears. The layout of the low + // 4-bytes of this Dword is upto SLIC - PLIC just checks whether the + // entire Dword is zero or not. A non-zero value in the low order + // 2-bytes will result in SLIC being granted the highest thread + // priority upon return. A 0 will return to SLIC as medium priority. + u64 plic_defer_ints_area; // Entire Dword + + // Used to pass the real SRR0/1 from PLIC to SLIC as well as to + // pass the target SRR0/1 from SLIC to PLIC on a SetAsrAndRfid. + u64 saved_srr0; // Saved SRR0 x10-x17 + u64 saved_srr1; // Saved SRR1 x18-x1F + + // Used to pass parms from the OS to PLIC for SetAsrAndRfid + u64 saved_gpr3; // Saved GPR3 x20-x27 + u64 saved_gpr4; // Saved GPR4 x28-x2F + u64 saved_gpr5; // Saved GPR5 x30-x37 + + u8 reserved4; // Reserved x38-x38 + u8 donate_dedicated_cpu; // Donate dedicated CPU cycles x39-x39 + u8 fpregs_in_use; // FP regs in use x3A-x3A + u8 pmcregs_in_use; // PMC regs in use x3B-x3B + volatile u32 saved_decr; // Saved Decr Value x3C-x3F + volatile u64 emulated_time_base;// Emulated TB for this thread x40-x47 + volatile u64 cur_plic_latency; // Unaccounted PLIC latency x48-x4F + u64 tot_plic_latency; // Accumulated PLIC latency x50-x57 + u64 wait_state_cycles; // Wait cycles for this proc x58-x5F + u64 end_of_quantum; // TB at end of quantum x60-x67 + u64 pdc_saved_sprg1; // Saved SPRG1 for PMC int x68-x6F + u64 pdc_saved_srr0; // Saved SRR0 for PMC int x70-x77 + volatile u32 virtual_decr; // Virtual DECR for shared procsx78-x7B + u16 slb_count; // # of SLBs to maintain x7C-x7D + u8 idle; // Indicate OS is idle x7E + u8 vmxregs_in_use; // VMX registers in use x7F + + +//============================================================================= +// CACHE_LINE_3 0x0100 - 0x017F: This line is shared with other processors +//============================================================================= + // This is the yield_count. An "odd" value (low bit on) means that + // the processor is yielded (either because of an OS yield or a PLIC + // preempt). An even value implies that the processor is currently + // executing. + // NOTE: This value will ALWAYS be zero for dedicated processors and + // will NEVER be zero for shared processors (ie, initialized to a 1). + volatile u32 yield_count; // PLIC increments each dispatchx00-x03 + u32 reserved6; + volatile u64 cmo_faults; // CMO page fault count x08-x0F + volatile u64 cmo_fault_time; // CMO page fault time x10-x17 + u8 reserved7[104]; // Reserved x18-x7F + +//============================================================================= +// CACHE_LINE_4-5 0x0180 - 0x027F Contains PMC interrupt data +//============================================================================= + u8 pmc_save_area[256]; // PMC interrupt Area x00-xFF +} __attribute__((__aligned__(0x400))); + +extern struct lppaca lppaca[]; + +/* + * SLB shadow buffer structure as defined in the PAPR. The save_area + * contains adjacent ESID and VSID pairs for each shadowed SLB. The + * ESID is stored in the lower 64bits, then the VSID. + */ +struct slb_shadow { + u32 persistent; // Number of persistent SLBs x00-x03 + u32 buffer_length; // Total shadow buffer length x04-x07 + u64 reserved; // Alignment x08-x0f + struct { + u64 esid; + u64 vsid; + } save_area[SLB_NUM_BOLTED]; // x10-x40 +} ____cacheline_aligned; + +extern struct slb_shadow slb_shadow[]; + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_LPPACA_H */ diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h new file mode 100644 index 000000000000..81713acf7529 --- /dev/null +++ b/arch/powerpc/include/asm/lv1call.h @@ -0,0 +1,348 @@ +/* + * PS3 hvcall interface. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * Copyright 2003, 2004 (c) MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if !defined(_ASM_POWERPC_LV1CALL_H) +#define _ASM_POWERPC_LV1CALL_H + +#if !defined(__ASSEMBLY__) + +#include + +/* lv1 call declaration macros */ + +#define LV1_1_IN_ARG_DECL u64 in_1 +#define LV1_2_IN_ARG_DECL LV1_1_IN_ARG_DECL, u64 in_2 +#define LV1_3_IN_ARG_DECL LV1_2_IN_ARG_DECL, u64 in_3 +#define LV1_4_IN_ARG_DECL LV1_3_IN_ARG_DECL, u64 in_4 +#define LV1_5_IN_ARG_DECL LV1_4_IN_ARG_DECL, u64 in_5 +#define LV1_6_IN_ARG_DECL LV1_5_IN_ARG_DECL, u64 in_6 +#define LV1_7_IN_ARG_DECL LV1_6_IN_ARG_DECL, u64 in_7 +#define LV1_8_IN_ARG_DECL LV1_7_IN_ARG_DECL, u64 in_8 +#define LV1_1_OUT_ARG_DECL u64 *out_1 +#define LV1_2_OUT_ARG_DECL LV1_1_OUT_ARG_DECL, u64 *out_2 +#define LV1_3_OUT_ARG_DECL LV1_2_OUT_ARG_DECL, u64 *out_3 +#define LV1_4_OUT_ARG_DECL LV1_3_OUT_ARG_DECL, u64 *out_4 +#define LV1_5_OUT_ARG_DECL LV1_4_OUT_ARG_DECL, u64 *out_5 +#define LV1_6_OUT_ARG_DECL LV1_5_OUT_ARG_DECL, u64 *out_6 +#define LV1_7_OUT_ARG_DECL LV1_6_OUT_ARG_DECL, u64 *out_7 + +#define LV1_0_IN_0_OUT_ARG_DECL void +#define LV1_1_IN_0_OUT_ARG_DECL LV1_1_IN_ARG_DECL +#define LV1_2_IN_0_OUT_ARG_DECL LV1_2_IN_ARG_DECL +#define LV1_3_IN_0_OUT_ARG_DECL LV1_3_IN_ARG_DECL +#define LV1_4_IN_0_OUT_ARG_DECL LV1_4_IN_ARG_DECL +#define LV1_5_IN_0_OUT_ARG_DECL LV1_5_IN_ARG_DECL +#define LV1_6_IN_0_OUT_ARG_DECL LV1_6_IN_ARG_DECL +#define LV1_7_IN_0_OUT_ARG_DECL LV1_7_IN_ARG_DECL + +#define LV1_0_IN_1_OUT_ARG_DECL LV1_1_OUT_ARG_DECL +#define LV1_1_IN_1_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_2_IN_1_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_3_IN_1_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_4_IN_1_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_5_IN_1_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_6_IN_1_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_7_IN_1_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_8_IN_1_OUT_ARG_DECL LV1_8_IN_ARG_DECL, LV1_1_OUT_ARG_DECL + +#define LV1_0_IN_2_OUT_ARG_DECL LV1_2_OUT_ARG_DECL +#define LV1_1_IN_2_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_2_IN_2_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_3_IN_2_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_4_IN_2_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_5_IN_2_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_6_IN_2_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_7_IN_2_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_2_OUT_ARG_DECL + +#define LV1_0_IN_3_OUT_ARG_DECL LV1_3_OUT_ARG_DECL +#define LV1_1_IN_3_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_2_IN_3_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_3_IN_3_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_4_IN_3_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_5_IN_3_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_6_IN_3_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_7_IN_3_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_3_OUT_ARG_DECL + +#define LV1_0_IN_4_OUT_ARG_DECL LV1_4_OUT_ARG_DECL +#define LV1_1_IN_4_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_2_IN_4_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_3_IN_4_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_4_IN_4_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_5_IN_4_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_6_IN_4_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_7_IN_4_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_4_OUT_ARG_DECL + +#define LV1_0_IN_5_OUT_ARG_DECL LV1_5_OUT_ARG_DECL +#define LV1_1_IN_5_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_2_IN_5_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_3_IN_5_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_4_IN_5_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_5_IN_5_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_6_IN_5_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_7_IN_5_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_5_OUT_ARG_DECL + +#define LV1_0_IN_6_OUT_ARG_DECL LV1_6_OUT_ARG_DECL +#define LV1_1_IN_6_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_2_IN_6_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_3_IN_6_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_4_IN_6_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_5_IN_6_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_6_IN_6_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_7_IN_6_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_6_OUT_ARG_DECL + +#define LV1_0_IN_7_OUT_ARG_DECL LV1_7_OUT_ARG_DECL +#define LV1_1_IN_7_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_2_IN_7_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_3_IN_7_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_4_IN_7_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_5_IN_7_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_6_IN_7_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_7_IN_7_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_7_OUT_ARG_DECL + +#define LV1_1_IN_ARGS in_1 +#define LV1_2_IN_ARGS LV1_1_IN_ARGS, in_2 +#define LV1_3_IN_ARGS LV1_2_IN_ARGS, in_3 +#define LV1_4_IN_ARGS LV1_3_IN_ARGS, in_4 +#define LV1_5_IN_ARGS LV1_4_IN_ARGS, in_5 +#define LV1_6_IN_ARGS LV1_5_IN_ARGS, in_6 +#define LV1_7_IN_ARGS LV1_6_IN_ARGS, in_7 +#define LV1_8_IN_ARGS LV1_7_IN_ARGS, in_8 + +#define LV1_1_OUT_ARGS out_1 +#define LV1_2_OUT_ARGS LV1_1_OUT_ARGS, out_2 +#define LV1_3_OUT_ARGS LV1_2_OUT_ARGS, out_3 +#define LV1_4_OUT_ARGS LV1_3_OUT_ARGS, out_4 +#define LV1_5_OUT_ARGS LV1_4_OUT_ARGS, out_5 +#define LV1_6_OUT_ARGS LV1_5_OUT_ARGS, out_6 +#define LV1_7_OUT_ARGS LV1_6_OUT_ARGS, out_7 + +#define LV1_0_IN_0_OUT_ARGS +#define LV1_1_IN_0_OUT_ARGS LV1_1_IN_ARGS +#define LV1_2_IN_0_OUT_ARGS LV1_2_IN_ARGS +#define LV1_3_IN_0_OUT_ARGS LV1_3_IN_ARGS +#define LV1_4_IN_0_OUT_ARGS LV1_4_IN_ARGS +#define LV1_5_IN_0_OUT_ARGS LV1_5_IN_ARGS +#define LV1_6_IN_0_OUT_ARGS LV1_6_IN_ARGS +#define LV1_7_IN_0_OUT_ARGS LV1_7_IN_ARGS + +#define LV1_0_IN_1_OUT_ARGS LV1_1_OUT_ARGS +#define LV1_1_IN_1_OUT_ARGS LV1_1_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_2_IN_1_OUT_ARGS LV1_2_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_3_IN_1_OUT_ARGS LV1_3_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_4_IN_1_OUT_ARGS LV1_4_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_5_IN_1_OUT_ARGS LV1_5_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_6_IN_1_OUT_ARGS LV1_6_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_7_IN_1_OUT_ARGS LV1_7_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_8_IN_1_OUT_ARGS LV1_8_IN_ARGS, LV1_1_OUT_ARGS + +#define LV1_0_IN_2_OUT_ARGS LV1_2_OUT_ARGS +#define LV1_1_IN_2_OUT_ARGS LV1_1_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_2_IN_2_OUT_ARGS LV1_2_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_3_IN_2_OUT_ARGS LV1_3_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_4_IN_2_OUT_ARGS LV1_4_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_5_IN_2_OUT_ARGS LV1_5_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_6_IN_2_OUT_ARGS LV1_6_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_7_IN_2_OUT_ARGS LV1_7_IN_ARGS, LV1_2_OUT_ARGS + +#define LV1_0_IN_3_OUT_ARGS LV1_3_OUT_ARGS +#define LV1_1_IN_3_OUT_ARGS LV1_1_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_2_IN_3_OUT_ARGS LV1_2_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_3_IN_3_OUT_ARGS LV1_3_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_4_IN_3_OUT_ARGS LV1_4_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_5_IN_3_OUT_ARGS LV1_5_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_6_IN_3_OUT_ARGS LV1_6_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_7_IN_3_OUT_ARGS LV1_7_IN_ARGS, LV1_3_OUT_ARGS + +#define LV1_0_IN_4_OUT_ARGS LV1_4_OUT_ARGS +#define LV1_1_IN_4_OUT_ARGS LV1_1_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_2_IN_4_OUT_ARGS LV1_2_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_3_IN_4_OUT_ARGS LV1_3_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_4_IN_4_OUT_ARGS LV1_4_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_5_IN_4_OUT_ARGS LV1_5_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_6_IN_4_OUT_ARGS LV1_6_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_7_IN_4_OUT_ARGS LV1_7_IN_ARGS, LV1_4_OUT_ARGS + +#define LV1_0_IN_5_OUT_ARGS LV1_5_OUT_ARGS +#define LV1_1_IN_5_OUT_ARGS LV1_1_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_2_IN_5_OUT_ARGS LV1_2_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_3_IN_5_OUT_ARGS LV1_3_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_4_IN_5_OUT_ARGS LV1_4_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_5_IN_5_OUT_ARGS LV1_5_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_6_IN_5_OUT_ARGS LV1_6_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_7_IN_5_OUT_ARGS LV1_7_IN_ARGS, LV1_5_OUT_ARGS + +#define LV1_0_IN_6_OUT_ARGS LV1_6_OUT_ARGS +#define LV1_1_IN_6_OUT_ARGS LV1_1_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_2_IN_6_OUT_ARGS LV1_2_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_3_IN_6_OUT_ARGS LV1_3_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_4_IN_6_OUT_ARGS LV1_4_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_5_IN_6_OUT_ARGS LV1_5_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_6_IN_6_OUT_ARGS LV1_6_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_7_IN_6_OUT_ARGS LV1_7_IN_ARGS, LV1_6_OUT_ARGS + +#define LV1_0_IN_7_OUT_ARGS LV1_7_OUT_ARGS +#define LV1_1_IN_7_OUT_ARGS LV1_1_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_2_IN_7_OUT_ARGS LV1_2_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_3_IN_7_OUT_ARGS LV1_3_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_4_IN_7_OUT_ARGS LV1_4_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_5_IN_7_OUT_ARGS LV1_5_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_6_IN_7_OUT_ARGS LV1_6_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_7_IN_7_OUT_ARGS LV1_7_IN_ARGS, LV1_7_OUT_ARGS + +/* + * This LV1_CALL() macro is for use by callers. It expands into an + * inline call wrapper and an underscored HV call declaration. The + * wrapper can be used to instrument the lv1 call interface. The + * file lv1call.S defines its own LV1_CALL() macro to expand into + * the actual underscored call definition. + */ + +#if !defined(LV1_CALL) +#define LV1_CALL(name, in, out, num) \ + extern s64 _lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL); \ + static inline int lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL) \ + {return _lv1_##name(LV1_##in##_IN_##out##_OUT_ARGS);} +#endif + +#endif /* !defined(__ASSEMBLY__) */ + +/* lv1 call table */ + +LV1_CALL(allocate_memory, 4, 2, 0 ) +LV1_CALL(write_htab_entry, 4, 0, 1 ) +LV1_CALL(construct_virtual_address_space, 3, 2, 2 ) +LV1_CALL(invalidate_htab_entries, 5, 0, 3 ) +LV1_CALL(get_virtual_address_space_id_of_ppe, 1, 1, 4 ) +LV1_CALL(query_logical_partition_address_region_info, 1, 5, 6 ) +LV1_CALL(select_virtual_address_space, 1, 0, 7 ) +LV1_CALL(pause, 1, 0, 9 ) +LV1_CALL(destruct_virtual_address_space, 1, 0, 10 ) +LV1_CALL(configure_irq_state_bitmap, 3, 0, 11 ) +LV1_CALL(connect_irq_plug_ext, 5, 0, 12 ) +LV1_CALL(release_memory, 1, 0, 13 ) +LV1_CALL(put_iopte, 5, 0, 15 ) +LV1_CALL(disconnect_irq_plug_ext, 3, 0, 17 ) +LV1_CALL(construct_event_receive_port, 0, 1, 18 ) +LV1_CALL(destruct_event_receive_port, 1, 0, 19 ) +LV1_CALL(send_event_locally, 1, 0, 24 ) +LV1_CALL(end_of_interrupt, 1, 0, 27 ) +LV1_CALL(connect_irq_plug, 2, 0, 28 ) +LV1_CALL(disconnect_irq_plug, 1, 0, 29 ) +LV1_CALL(end_of_interrupt_ext, 3, 0, 30 ) +LV1_CALL(did_update_interrupt_mask, 2, 0, 31 ) +LV1_CALL(shutdown_logical_partition, 1, 0, 44 ) +LV1_CALL(destruct_logical_spe, 1, 0, 54 ) +LV1_CALL(construct_logical_spe, 7, 6, 57 ) +LV1_CALL(set_spe_interrupt_mask, 3, 0, 61 ) +LV1_CALL(set_spe_transition_notifier, 3, 0, 64 ) +LV1_CALL(disable_logical_spe, 2, 0, 65 ) +LV1_CALL(clear_spe_interrupt_status, 4, 0, 66 ) +LV1_CALL(get_spe_interrupt_status, 2, 1, 67 ) +LV1_CALL(get_logical_ppe_id, 0, 1, 69 ) +LV1_CALL(set_interrupt_mask, 5, 0, 73 ) +LV1_CALL(get_logical_partition_id, 0, 1, 74 ) +LV1_CALL(configure_execution_time_variable, 1, 0, 77 ) +LV1_CALL(get_spe_irq_outlet, 2, 1, 78 ) +LV1_CALL(set_spe_privilege_state_area_1_register, 3, 0, 79 ) +LV1_CALL(create_repository_node, 6, 0, 90 ) +LV1_CALL(get_repository_node_value, 5, 2, 91 ) +LV1_CALL(modify_repository_node_value, 6, 0, 92 ) +LV1_CALL(remove_repository_node, 4, 0, 93 ) +LV1_CALL(read_htab_entries, 2, 5, 95 ) +LV1_CALL(set_dabr, 2, 0, 96 ) +LV1_CALL(get_total_execution_time, 2, 1, 103 ) +LV1_CALL(allocate_io_segment, 3, 1, 116 ) +LV1_CALL(release_io_segment, 2, 0, 117 ) +LV1_CALL(construct_io_irq_outlet, 1, 1, 120 ) +LV1_CALL(destruct_io_irq_outlet, 1, 0, 121 ) +LV1_CALL(map_htab, 1, 1, 122 ) +LV1_CALL(unmap_htab, 1, 0, 123 ) +LV1_CALL(get_version_info, 0, 1, 127 ) +LV1_CALL(insert_htab_entry, 6, 3, 158 ) +LV1_CALL(read_virtual_uart, 3, 1, 162 ) +LV1_CALL(write_virtual_uart, 3, 1, 163 ) +LV1_CALL(set_virtual_uart_param, 3, 0, 164 ) +LV1_CALL(get_virtual_uart_param, 2, 1, 165 ) +LV1_CALL(configure_virtual_uart_irq, 1, 1, 166 ) +LV1_CALL(open_device, 3, 0, 170 ) +LV1_CALL(close_device, 2, 0, 171 ) +LV1_CALL(map_device_mmio_region, 5, 1, 172 ) +LV1_CALL(unmap_device_mmio_region, 3, 0, 173 ) +LV1_CALL(allocate_device_dma_region, 5, 1, 174 ) +LV1_CALL(free_device_dma_region, 3, 0, 175 ) +LV1_CALL(map_device_dma_region, 6, 0, 176 ) +LV1_CALL(unmap_device_dma_region, 4, 0, 177 ) +LV1_CALL(net_add_multicast_address, 4, 0, 185 ) +LV1_CALL(net_remove_multicast_address, 4, 0, 186 ) +LV1_CALL(net_start_tx_dma, 4, 0, 187 ) +LV1_CALL(net_stop_tx_dma, 3, 0, 188 ) +LV1_CALL(net_start_rx_dma, 4, 0, 189 ) +LV1_CALL(net_stop_rx_dma, 3, 0, 190 ) +LV1_CALL(net_set_interrupt_status_indicator, 4, 0, 191 ) +LV1_CALL(net_set_interrupt_mask, 4, 0, 193 ) +LV1_CALL(net_control, 6, 2, 194 ) +LV1_CALL(connect_interrupt_event_receive_port, 4, 0, 197 ) +LV1_CALL(disconnect_interrupt_event_receive_port, 4, 0, 198 ) +LV1_CALL(get_spe_all_interrupt_statuses, 1, 1, 199 ) +LV1_CALL(deconfigure_virtual_uart_irq, 0, 0, 202 ) +LV1_CALL(enable_logical_spe, 2, 0, 207 ) +LV1_CALL(gpu_open, 1, 0, 210 ) +LV1_CALL(gpu_close, 0, 0, 211 ) +LV1_CALL(gpu_device_map, 1, 2, 212 ) +LV1_CALL(gpu_device_unmap, 1, 0, 213 ) +LV1_CALL(gpu_memory_allocate, 5, 2, 214 ) +LV1_CALL(gpu_memory_free, 1, 0, 216 ) +LV1_CALL(gpu_context_allocate, 2, 5, 217 ) +LV1_CALL(gpu_context_free, 1, 0, 218 ) +LV1_CALL(gpu_context_iomap, 5, 0, 221 ) +LV1_CALL(gpu_context_attribute, 6, 0, 225 ) +LV1_CALL(gpu_context_intr, 1, 1, 227 ) +LV1_CALL(gpu_attribute, 5, 0, 228 ) +LV1_CALL(get_rtc, 0, 2, 232 ) +LV1_CALL(set_ppe_periodic_tracer_frequency, 1, 0, 240 ) +LV1_CALL(start_ppe_periodic_tracer, 5, 0, 241 ) +LV1_CALL(stop_ppe_periodic_tracer, 1, 1, 242 ) +LV1_CALL(storage_read, 6, 1, 245 ) +LV1_CALL(storage_write, 6, 1, 246 ) +LV1_CALL(storage_send_device_command, 6, 1, 248 ) +LV1_CALL(storage_get_async_status, 1, 2, 249 ) +LV1_CALL(storage_check_async_status, 2, 1, 254 ) +LV1_CALL(panic, 1, 0, 255 ) +LV1_CALL(construct_lpm, 6, 3, 140 ) +LV1_CALL(destruct_lpm, 1, 0, 141 ) +LV1_CALL(start_lpm, 1, 0, 142 ) +LV1_CALL(stop_lpm, 1, 1, 143 ) +LV1_CALL(copy_lpm_trace_buffer, 3, 1, 144 ) +LV1_CALL(add_lpm_event_bookmark, 5, 0, 145 ) +LV1_CALL(delete_lpm_event_bookmark, 3, 0, 146 ) +LV1_CALL(set_lpm_interrupt_mask, 3, 1, 147 ) +LV1_CALL(get_lpm_interrupt_status, 1, 1, 148 ) +LV1_CALL(set_lpm_general_control, 5, 2, 149 ) +LV1_CALL(set_lpm_interval, 3, 1, 150 ) +LV1_CALL(set_lpm_trigger_control, 3, 1, 151 ) +LV1_CALL(set_lpm_counter_control, 4, 1, 152 ) +LV1_CALL(set_lpm_group_control, 3, 1, 153 ) +LV1_CALL(set_lpm_debug_bus_control, 3, 1, 154 ) +LV1_CALL(set_lpm_counter, 5, 2, 155 ) +LV1_CALL(set_lpm_signal, 7, 0, 156 ) +LV1_CALL(set_lpm_spr_trigger, 2, 0, 157 ) + +#endif diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h new file mode 100644 index 000000000000..893aafd87fde --- /dev/null +++ b/arch/powerpc/include/asm/machdep.h @@ -0,0 +1,365 @@ +#ifndef _ASM_POWERPC_MACHDEP_H +#define _ASM_POWERPC_MACHDEP_H +#ifdef __KERNEL__ + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include + +#include + +/* We export this macro for external modules like Alsa to know if + * ppc_md.feature_call is implemented or not + */ +#define CONFIG_PPC_HAS_FEATURE_CALLS + +struct pt_regs; +struct pci_bus; +struct device_node; +struct iommu_table; +struct rtc_time; +struct file; +struct pci_controller; +#ifdef CONFIG_KEXEC +struct kimage; +#endif + +#ifdef CONFIG_SMP +struct smp_ops_t { + void (*message_pass)(int target, int msg); + int (*probe)(void); + void (*kick_cpu)(int nr); + void (*setup_cpu)(int nr); + void (*take_timebase)(void); + void (*give_timebase)(void); + int (*cpu_enable)(unsigned int nr); + int (*cpu_disable)(void); + void (*cpu_die)(unsigned int nr); + int (*cpu_bootable)(unsigned int nr); +}; +#endif + +struct machdep_calls { + char *name; +#ifdef CONFIG_PPC64 + void (*hpte_invalidate)(unsigned long slot, + unsigned long va, + int psize, int ssize, + int local); + long (*hpte_updatepp)(unsigned long slot, + unsigned long newpp, + unsigned long va, + int psize, int ssize, + int local); + void (*hpte_updateboltedpp)(unsigned long newpp, + unsigned long ea, + int psize, int ssize); + long (*hpte_insert)(unsigned long hpte_group, + unsigned long va, + unsigned long prpn, + unsigned long rflags, + unsigned long vflags, + int psize, int ssize); + long (*hpte_remove)(unsigned long hpte_group); + void (*hpte_removebolted)(unsigned long ea, + int psize, int ssize); + void (*flush_hash_range)(unsigned long number, int local); + + /* special for kexec, to be called in real mode, linar mapping is + * destroyed as well */ + void (*hpte_clear_all)(void); + + int (*tce_build)(struct iommu_table *tbl, + long index, + long npages, + unsigned long uaddr, + enum dma_data_direction direction, + struct dma_attrs *attrs); + void (*tce_free)(struct iommu_table *tbl, + long index, + long npages); + unsigned long (*tce_get)(struct iommu_table *tbl, + long index); + void (*tce_flush)(struct iommu_table *tbl); + void (*pci_dma_dev_setup)(struct pci_dev *dev); + void (*pci_dma_bus_setup)(struct pci_bus *bus); + + void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size, + unsigned long flags); + void (*iounmap)(volatile void __iomem *token); + +#ifdef CONFIG_PM + void (*iommu_save)(void); + void (*iommu_restore)(void); +#endif +#endif /* CONFIG_PPC64 */ + + int (*probe)(void); + void (*setup_arch)(void); /* Optional, may be NULL */ + void (*init_early)(void); + /* Optional, may be NULL. */ + void (*show_cpuinfo)(struct seq_file *m); + void (*show_percpuinfo)(struct seq_file *m, int i); + + void (*init_IRQ)(void); + unsigned int (*get_irq)(void); +#ifdef CONFIG_KEXEC + void (*kexec_cpu_down)(int crash_shutdown, int secondary); +#endif + + /* PCI stuff */ + /* Called after scanning the bus, before allocating resources */ + void (*pcibios_fixup)(void); + int (*pci_probe_mode)(struct pci_bus *); + void (*pci_irq_fixup)(struct pci_dev *dev); + + /* To setup PHBs when using automatic OF platform driver for PCI */ + int (*pci_setup_phb)(struct pci_controller *host); + +#ifdef CONFIG_PCI_MSI + int (*msi_check_device)(struct pci_dev* dev, + int nvec, int type); + int (*setup_msi_irqs)(struct pci_dev *dev, + int nvec, int type); + void (*teardown_msi_irqs)(struct pci_dev *dev); +#endif + + void (*restart)(char *cmd); + void (*power_off)(void); + void (*halt)(void); + void (*panic)(char *str); + void (*cpu_die)(void); + + long (*time_init)(void); /* Optional, may be NULL */ + + int (*set_rtc_time)(struct rtc_time *); + void (*get_rtc_time)(struct rtc_time *); + unsigned long (*get_boot_time)(void); + unsigned char (*rtc_read_val)(int addr); + void (*rtc_write_val)(int addr, unsigned char val); + + void (*calibrate_decr)(void); + + void (*progress)(char *, unsigned short); + + /* Interface for platform error logging */ + void (*log_error)(char *buf, unsigned int err_type, int fatal); + + unsigned char (*nvram_read_val)(int addr); + void (*nvram_write_val)(int addr, unsigned char val); + ssize_t (*nvram_write)(char *buf, size_t count, loff_t *index); + ssize_t (*nvram_read)(char *buf, size_t count, loff_t *index); + ssize_t (*nvram_size)(void); + void (*nvram_sync)(void); + + /* Exception handlers */ + int (*system_reset_exception)(struct pt_regs *regs); + int (*machine_check_exception)(struct pt_regs *regs); + + /* Motherboard/chipset features. This is a kind of general purpose + * hook used to control some machine specific features (like reset + * lines, chip power control, etc...). + */ + long (*feature_call)(unsigned int feature, ...); + + /* Get legacy PCI/IDE interrupt mapping */ + int (*pci_get_legacy_ide_irq)(struct pci_dev *dev, int channel); + + /* Get access protection for /dev/mem */ + pgprot_t (*phys_mem_access_prot)(struct file *file, + unsigned long pfn, + unsigned long size, + pgprot_t vma_prot); + + /* Idle loop for this platform, leave empty for default idle loop */ + void (*idle_loop)(void); + + /* + * Function for waiting for work with reduced power in idle loop; + * called with interrupts disabled. + */ + void (*power_save)(void); + + /* Function to enable performance monitor counters for this + platform, called once per cpu. */ + void (*enable_pmcs)(void); + + /* Set DABR for this platform, leave empty for default implemenation */ + int (*set_dabr)(unsigned long dabr); + +#ifdef CONFIG_PPC32 /* XXX for now */ + /* A general init function, called by ppc_init in init/main.c. + May be NULL. */ + void (*init)(void); + + void (*kgdb_map_scc)(void); + + /* + * optional PCI "hooks" + */ + /* Called in indirect_* to avoid touching devices */ + int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char); + + /* Called at then very end of pcibios_init() */ + void (*pcibios_after_init)(void); + +#endif /* CONFIG_PPC32 */ + + /* Called after PPC generic resource fixup to perform + machine specific fixups */ + void (*pcibios_fixup_resources)(struct pci_dev *); + + /* Called for each PCI bus in the system when it's probed */ + void (*pcibios_fixup_bus)(struct pci_bus *); + + /* Called when pci_enable_device() is called. Returns 0 to + * allow assignment/enabling of the device. */ + int (*pcibios_enable_device_hook)(struct pci_dev *); + + /* Called to shutdown machine specific hardware not already controlled + * by other drivers. + */ + void (*machine_shutdown)(void); + +#ifdef CONFIG_KEXEC + /* Called to do the minimal shutdown needed to run a kexec'd kernel + * to run successfully. + * XXX Should we move this one out of kexec scope? + */ + void (*machine_crash_shutdown)(struct pt_regs *regs); + + /* Called to do what every setup is needed on image and the + * reboot code buffer. Returns 0 on success. + * Provide your own (maybe dummy) implementation if your platform + * claims to support kexec. + */ + int (*machine_kexec_prepare)(struct kimage *image); + + /* Called to handle any machine specific cleanup on image */ + void (*machine_kexec_cleanup)(struct kimage *image); + + /* Called to perform the _real_ kexec. + * Do NOT allocate memory or fail here. We are past the point of + * no return. + */ + void (*machine_kexec)(struct kimage *image); +#endif /* CONFIG_KEXEC */ + +#ifdef CONFIG_SUSPEND + /* These are called to disable and enable, respectively, IRQs when + * entering a suspend state. If NULL, then the generic versions + * will be called. The generic versions disable/enable the + * decrementer along with interrupts. + */ + void (*suspend_disable_irqs)(void); + void (*suspend_enable_irqs)(void); +#endif +}; + +extern void e500_idle(void); +extern void power4_idle(void); +extern void power4_cpu_offline_powersave(void); +extern void ppc6xx_idle(void); + +/* + * ppc_md contains a copy of the machine description structure for the + * current platform. machine_id contains the initial address where the + * description was found during boot. + */ +extern struct machdep_calls ppc_md; +extern struct machdep_calls *machine_id; + +#define __machine_desc __attribute__ ((__section__ (".machine.desc"))) + +#define define_machine(name) \ + extern struct machdep_calls mach_##name; \ + EXPORT_SYMBOL(mach_##name); \ + struct machdep_calls mach_##name __machine_desc = + +#define machine_is(name) \ + ({ \ + extern struct machdep_calls mach_##name \ + __attribute__((weak)); \ + machine_id == &mach_##name; \ + }) + +extern void probe_machine(void); + +extern char cmd_line[COMMAND_LINE_SIZE]; + +#ifdef CONFIG_PPC_PMAC +/* + * Power macintoshes have either a CUDA, PMU or SMU controlling + * system reset, power, NVRAM, RTC. + */ +typedef enum sys_ctrler_kind { + SYS_CTRLER_UNKNOWN = 0, + SYS_CTRLER_CUDA = 1, + SYS_CTRLER_PMU = 2, + SYS_CTRLER_SMU = 3, +} sys_ctrler_t; +extern sys_ctrler_t sys_ctrler; + +#endif /* CONFIG_PPC_PMAC */ + +extern void setup_pci_ptrs(void); + +#ifdef CONFIG_SMP +/* Poor default implementations */ +extern void __devinit smp_generic_give_timebase(void); +extern void __devinit smp_generic_take_timebase(void); +#endif /* CONFIG_SMP */ + + +/* Functions to produce codes on the leds. + * The SRC code should be unique for the message category and should + * be limited to the lower 24 bits (the upper 8 are set by these funcs), + * and (for boot & dump) should be sorted numerically in the order + * the events occur. + */ +/* Print a boot progress message. */ +void ppc64_boot_msg(unsigned int src, const char *msg); +/* Print a termination message (print only -- does not stop the kernel) */ +void ppc64_terminate_msg(unsigned int src, const char *msg); + +static inline void log_error(char *buf, unsigned int err_type, int fatal) +{ + if (ppc_md.log_error) + ppc_md.log_error(buf, err_type, fatal); +} + +#define __define_machine_initcall(mach,level,fn,id) \ + static int __init __machine_initcall_##mach##_##fn(void) { \ + if (machine_is(mach)) return fn(); \ + return 0; \ + } \ + __define_initcall(level,__machine_initcall_##mach##_##fn,id); + +#define machine_core_initcall(mach,fn) __define_machine_initcall(mach,"1",fn,1) +#define machine_core_initcall_sync(mach,fn) __define_machine_initcall(mach,"1s",fn,1s) +#define machine_postcore_initcall(mach,fn) __define_machine_initcall(mach,"2",fn,2) +#define machine_postcore_initcall_sync(mach,fn) __define_machine_initcall(mach,"2s",fn,2s) +#define machine_arch_initcall(mach,fn) __define_machine_initcall(mach,"3",fn,3) +#define machine_arch_initcall_sync(mach,fn) __define_machine_initcall(mach,"3s",fn,3s) +#define machine_subsys_initcall(mach,fn) __define_machine_initcall(mach,"4",fn,4) +#define machine_subsys_initcall_sync(mach,fn) __define_machine_initcall(mach,"4s",fn,4s) +#define machine_fs_initcall(mach,fn) __define_machine_initcall(mach,"5",fn,5) +#define machine_fs_initcall_sync(mach,fn) __define_machine_initcall(mach,"5s",fn,5s) +#define machine_rootfs_initcall(mach,fn) __define_machine_initcall(mach,"rootfs",fn,rootfs) +#define machine_device_initcall(mach,fn) __define_machine_initcall(mach,"6",fn,6) +#define machine_device_initcall_sync(mach,fn) __define_machine_initcall(mach,"6s",fn,6s) +#define machine_late_initcall(mach,fn) __define_machine_initcall(mach,"7",fn,7) +#define machine_late_initcall_sync(mach,fn) __define_machine_initcall(mach,"7s",fn,7s) + +void generic_suspend_disable_irqs(void); +void generic_suspend_enable_irqs(void); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MACHDEP_H */ diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h new file mode 100644 index 000000000000..079c06eae446 --- /dev/null +++ b/arch/powerpc/include/asm/macio.h @@ -0,0 +1,142 @@ +#ifndef __MACIO_ASIC_H__ +#define __MACIO_ASIC_H__ +#ifdef __KERNEL__ + +#include + +extern struct bus_type macio_bus_type; + +/* MacIO device driver is defined later */ +struct macio_driver; +struct macio_chip; + +#define MACIO_DEV_COUNT_RESOURCES 8 +#define MACIO_DEV_COUNT_IRQS 8 + +/* + * the macio_bus structure is used to describe a "virtual" bus + * within a MacIO ASIC. It's typically provided by a macio_pci_asic + * PCI device, but could be provided differently as well (nubus + * machines using a fake OF tree). + * + * The pdev field can be NULL on non-PCI machines + */ +struct macio_bus +{ + struct macio_chip *chip; /* macio_chip (private use) */ + int index; /* macio chip index in system */ +#ifdef CONFIG_PCI + struct pci_dev *pdev; /* PCI device hosting this bus */ +#endif +}; + +/* + * the macio_dev structure is used to describe a device + * within an Apple MacIO ASIC. + */ +struct macio_dev +{ + struct macio_bus *bus; /* macio bus this device is on */ + struct macio_dev *media_bay; /* Device is part of a media bay */ + struct of_device ofdev; + int n_resources; + struct resource resource[MACIO_DEV_COUNT_RESOURCES]; + int n_interrupts; + struct resource interrupt[MACIO_DEV_COUNT_IRQS]; +}; +#define to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev) +#define of_to_macio_device(d) container_of(d, struct macio_dev, ofdev) + +extern struct macio_dev *macio_dev_get(struct macio_dev *dev); +extern void macio_dev_put(struct macio_dev *dev); + +/* + * Accessors to resources & interrupts and other device + * fields + */ + +static inline int macio_resource_count(struct macio_dev *dev) +{ + return dev->n_resources; +} + +static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no) +{ + return dev->resource[resource_no].start; +} + +static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no) +{ + return dev->resource[resource_no].end; +} + +static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no) +{ + struct resource *res = &dev->resource[resource_no]; + if (res->start == 0 || res->end == 0 || res->end < res->start) + return 0; + return res->end - res->start + 1; +} + +extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name); +extern void macio_release_resource(struct macio_dev *dev, int resource_no); +extern int macio_request_resources(struct macio_dev *dev, const char *name); +extern void macio_release_resources(struct macio_dev *dev); + +static inline int macio_irq_count(struct macio_dev *dev) +{ + return dev->n_interrupts; +} + +static inline int macio_irq(struct macio_dev *dev, int irq_no) +{ + return dev->interrupt[irq_no].start; +} + +static inline void macio_set_drvdata(struct macio_dev *dev, void *data) +{ + dev_set_drvdata(&dev->ofdev.dev, data); +} + +static inline void* macio_get_drvdata(struct macio_dev *dev) +{ + return dev_get_drvdata(&dev->ofdev.dev); +} + +static inline struct device_node *macio_get_of_node(struct macio_dev *mdev) +{ + return mdev->ofdev.node; +} + +#ifdef CONFIG_PCI +static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev) +{ + return mdev->bus->pdev; +} +#endif + +/* + * A driver for a mac-io chip based device + */ +struct macio_driver +{ + char *name; + struct of_device_id *match_table; + struct module *owner; + + int (*probe)(struct macio_dev* dev, const struct of_device_id *match); + int (*remove)(struct macio_dev* dev); + + int (*suspend)(struct macio_dev* dev, pm_message_t state); + int (*resume)(struct macio_dev* dev); + int (*shutdown)(struct macio_dev* dev); + + struct device_driver driver; +}; +#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver) + +extern int macio_register_driver(struct macio_driver *); +extern void macio_unregister_driver(struct macio_driver *); + +#endif /* __KERNEL__ */ +#endif /* __MACIO_ASIC_H__ */ diff --git a/arch/powerpc/include/asm/mc146818rtc.h b/arch/powerpc/include/asm/mc146818rtc.h new file mode 100644 index 000000000000..f2741c8b59a1 --- /dev/null +++ b/arch/powerpc/include/asm/mc146818rtc.h @@ -0,0 +1,36 @@ +#ifndef _ASM_POWERPC_MC146818RTC_H +#define _ASM_POWERPC_MC146818RTC_H + +/* + * Machine dependent access functions for RTC registers. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __KERNEL__ + +#include + +#ifndef RTC_PORT +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ +#endif + +/* + * The yet supported machines all access the RTC index register via + * an ISA port access but the way to access the date register differs ... + */ +#define CMOS_READ(addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +inb_p(RTC_PORT(1)); \ +}) +#define CMOS_WRITE(val, addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +outb_p((val),RTC_PORT(1)); \ +}) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MC146818RTC_H */ diff --git a/arch/powerpc/include/asm/mediabay.h b/arch/powerpc/include/asm/mediabay.h new file mode 100644 index 000000000000..b2efb3325808 --- /dev/null +++ b/arch/powerpc/include/asm/mediabay.h @@ -0,0 +1,43 @@ +/* + * mediabay.h: definitions for using the media bay + * on PowerBook 3400 and similar computers. + * + * Copyright (C) 1997 Paul Mackerras. + */ +#ifndef _PPC_MEDIABAY_H +#define _PPC_MEDIABAY_H + +#ifdef __KERNEL__ + +#define MB_FD 0 /* media bay contains floppy drive (automatic eject ?) */ +#define MB_FD1 1 /* media bay contains floppy drive (manual eject ?) */ +#define MB_SOUND 2 /* sound device ? */ +#define MB_CD 3 /* media bay contains ATA drive such as CD or ZIP */ +#define MB_PCI 5 /* media bay contains a PCI device */ +#define MB_POWER 6 /* media bay contains a Power device (???) */ +#define MB_NO 7 /* media bay contains nothing */ + +/* Number of bays in the machine or 0 */ +extern int media_bay_count; + +#ifdef CONFIG_BLK_DEV_IDE_PMAC +#include + +int check_media_bay_by_base(unsigned long base, int what); +/* called by IDE PMAC host driver to register IDE controller for media bay */ +int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base, + int irq, ide_hwif_t *hwif); + +int check_media_bay(struct device_node *which_bay, int what); + +#else + +static inline int check_media_bay(struct device_node *which_bay, int what) +{ + return -ENODEV; +} + +#endif + +#endif /* __KERNEL__ */ +#endif /* _PPC_MEDIABAY_H */ diff --git a/arch/powerpc/include/asm/mman.h b/arch/powerpc/include/asm/mman.h new file mode 100644 index 000000000000..9209f755763e --- /dev/null +++ b/arch/powerpc/include/asm/mman.h @@ -0,0 +1,63 @@ +#ifndef _ASM_POWERPC_MMAN_H +#define _ASM_POWERPC_MMAN_H + +#include + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define PROT_SAO 0x10 /* Strong Access Ordering */ + +#define MAP_RENAME MAP_ANONYMOUS /* In SunOS terminology */ +#define MAP_NORESERVE 0x40 /* don't reserve swap pages */ +#define MAP_LOCKED 0x80 + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ + +#define MCL_CURRENT 0x2000 /* lock all currently mapped pages */ +#define MCL_FUTURE 0x4000 /* lock all additions to address space */ + +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#ifdef __KERNEL__ +#ifdef CONFIG_PPC64 + +#include +#include + +/* + * This file is included by linux/mman.h, so we can't use cacl_vm_prot_bits() + * here. How important is the optimization? + */ +static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot) +{ + return (prot & PROT_SAO) ? VM_SAO : 0; +} +#define arch_calc_vm_prot_bits(prot) arch_calc_vm_prot_bits(prot) + +static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags) +{ + return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : 0; +} +#define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags) + +static inline int arch_validate_prot(unsigned long prot) +{ + if (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM | PROT_SAO)) + return 0; + if ((prot & PROT_SAO) && !cpu_has_feature(CPU_FTR_SAO)) + return 0; + return 1; +} +#define arch_validate_prot(prot) arch_validate_prot(prot) + +#endif /* CONFIG_PPC64 */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MMAN_H */ diff --git a/arch/powerpc/include/asm/mmu-40x.h b/arch/powerpc/include/asm/mmu-40x.h new file mode 100644 index 000000000000..3d108676584c --- /dev/null +++ b/arch/powerpc/include/asm/mmu-40x.h @@ -0,0 +1,63 @@ +#ifndef _ASM_POWERPC_MMU_40X_H_ +#define _ASM_POWERPC_MMU_40X_H_ + +/* + * PPC40x support + */ + +#define PPC40X_TLB_SIZE 64 + +/* + * TLB entries are defined by a "high" tag portion and a "low" data + * portion. On all architectures, the data portion is 32-bits. + * + * TLB entries are managed entirely under software control by reading, + * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx + * instructions. + */ + +#define TLB_LO 1 +#define TLB_HI 0 + +#define TLB_DATA TLB_LO +#define TLB_TAG TLB_HI + +/* Tag portion */ + +#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */ +#define TLB_PAGESZ_MASK 0x00000380 +#define TLB_PAGESZ(x) (((x) & 0x7) << 7) +#define PAGESZ_1K 0 +#define PAGESZ_4K 1 +#define PAGESZ_16K 2 +#define PAGESZ_64K 3 +#define PAGESZ_256K 4 +#define PAGESZ_1M 5 +#define PAGESZ_4M 6 +#define PAGESZ_16M 7 +#define TLB_VALID 0x00000040 /* Entry is valid */ + +/* Data portion */ + +#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */ +#define TLB_PERM_MASK 0x00000300 +#define TLB_EX 0x00000200 /* Instruction execution allowed */ +#define TLB_WR 0x00000100 /* Writes permitted */ +#define TLB_ZSEL_MASK 0x000000F0 +#define TLB_ZSEL(x) (((x) & 0xF) << 4) +#define TLB_ATTR_MASK 0x0000000F +#define TLB_W 0x00000008 /* Caching is write-through */ +#define TLB_I 0x00000004 /* Caching is inhibited */ +#define TLB_M 0x00000002 /* Memory is coherent */ +#define TLB_G 0x00000001 /* Memory is guarded from prefetch */ + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long id; + unsigned long vdso_base; +} mm_context_t; + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_MMU_40X_H_ */ diff --git a/arch/powerpc/include/asm/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h new file mode 100644 index 000000000000..a825524c981a --- /dev/null +++ b/arch/powerpc/include/asm/mmu-44x.h @@ -0,0 +1,76 @@ +#ifndef _ASM_POWERPC_MMU_44X_H_ +#define _ASM_POWERPC_MMU_44X_H_ +/* + * PPC440 support + */ + +#define PPC44x_MMUCR_TID 0x000000ff +#define PPC44x_MMUCR_STS 0x00010000 + +#define PPC44x_TLB_PAGEID 0 +#define PPC44x_TLB_XLAT 1 +#define PPC44x_TLB_ATTRIB 2 + +/* Page identification fields */ +#define PPC44x_TLB_EPN_MASK 0xfffffc00 /* Effective Page Number */ +#define PPC44x_TLB_VALID 0x00000200 /* Valid flag */ +#define PPC44x_TLB_TS 0x00000100 /* Translation address space */ +#define PPC44x_TLB_1K 0x00000000 /* Page sizes */ +#define PPC44x_TLB_4K 0x00000010 +#define PPC44x_TLB_16K 0x00000020 +#define PPC44x_TLB_64K 0x00000030 +#define PPC44x_TLB_256K 0x00000040 +#define PPC44x_TLB_1M 0x00000050 +#define PPC44x_TLB_16M 0x00000070 +#define PPC44x_TLB_256M 0x00000090 + +/* Translation fields */ +#define PPC44x_TLB_RPN_MASK 0xfffffc00 /* Real Page Number */ +#define PPC44x_TLB_ERPN_MASK 0x0000000f + +/* Storage attribute and access control fields */ +#define PPC44x_TLB_ATTR_MASK 0x0000ff80 +#define PPC44x_TLB_U0 0x00008000 /* User 0 */ +#define PPC44x_TLB_U1 0x00004000 /* User 1 */ +#define PPC44x_TLB_U2 0x00002000 /* User 2 */ +#define PPC44x_TLB_U3 0x00001000 /* User 3 */ +#define PPC44x_TLB_W 0x00000800 /* Caching is write-through */ +#define PPC44x_TLB_I 0x00000400 /* Caching is inhibited */ +#define PPC44x_TLB_M 0x00000200 /* Memory is coherent */ +#define PPC44x_TLB_G 0x00000100 /* Memory is guarded */ +#define PPC44x_TLB_E 0x00000080 /* Memory is guarded */ + +#define PPC44x_TLB_PERM_MASK 0x0000003f +#define PPC44x_TLB_UX 0x00000020 /* User execution */ +#define PPC44x_TLB_UW 0x00000010 /* User write */ +#define PPC44x_TLB_UR 0x00000008 /* User read */ +#define PPC44x_TLB_SX 0x00000004 /* Super execution */ +#define PPC44x_TLB_SW 0x00000002 /* Super write */ +#define PPC44x_TLB_SR 0x00000001 /* Super read */ + +/* Number of TLB entries */ +#define PPC44x_TLB_SIZE 64 + +#ifndef __ASSEMBLY__ + +extern unsigned int tlb_44x_hwater; + +typedef struct { + unsigned long id; + unsigned long vdso_base; +} mm_context_t; + +#endif /* !__ASSEMBLY__ */ + +#ifndef CONFIG_PPC_EARLY_DEBUG_44x +#define PPC44x_EARLY_TLBS 1 +#else +#define PPC44x_EARLY_TLBS 2 +#define PPC44x_EARLY_DEBUG_VIRTADDR (ASM_CONST(0xf0000000) \ + | (ASM_CONST(CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW) & 0xffff)) +#endif + +/* Size of the TLBs used for pinning in lowmem */ +#define PPC_PIN_SIZE (1 << 28) /* 256M */ + +#endif /* _ASM_POWERPC_MMU_44X_H_ */ diff --git a/arch/powerpc/include/asm/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h new file mode 100644 index 000000000000..9db877eb88db --- /dev/null +++ b/arch/powerpc/include/asm/mmu-8xx.h @@ -0,0 +1,145 @@ +#ifndef _ASM_POWERPC_MMU_8XX_H_ +#define _ASM_POWERPC_MMU_8XX_H_ +/* + * PPC8xx support + */ + +/* Control/status registers for the MPC8xx. + * A write operation to these registers causes serialized access. + * During software tablewalk, the registers used perform mask/shift-add + * operations when written/read. A TLB entry is created when the Mx_RPN + * is written, and the contents of several registers are used to + * create the entry. + */ +#define SPRN_MI_CTR 784 /* Instruction TLB control register */ +#define MI_GPM 0x80000000 /* Set domain manager mode */ +#define MI_PPM 0x40000000 /* Set subpage protection */ +#define MI_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */ +#define MI_RSV4I 0x08000000 /* Reserve 4 TLB entries */ +#define MI_PPCS 0x02000000 /* Use MI_RPN prob/priv state */ +#define MI_IDXMASK 0x00001f00 /* TLB index to be loaded */ +#define MI_RESETVAL 0x00000000 /* Value of register at reset */ + +/* These are the Ks and Kp from the PowerPC books. For proper operation, + * Ks = 0, Kp = 1. + */ +#define SPRN_MI_AP 786 +#define MI_Ks 0x80000000 /* Should not be set */ +#define MI_Kp 0x40000000 /* Should always be set */ + +/* The effective page number register. When read, contains the information + * about the last instruction TLB miss. When MI_RPN is written, bits in + * this register are used to create the TLB entry. + */ +#define SPRN_MI_EPN 787 +#define MI_EPNMASK 0xfffff000 /* Effective page number for entry */ +#define MI_EVALID 0x00000200 /* Entry is valid */ +#define MI_ASIDMASK 0x0000000f /* ASID match value */ + /* Reset value is undefined */ + +/* A "level 1" or "segment" or whatever you want to call it register. + * For the instruction TLB, it contains bits that get loaded into the + * TLB entry when the MI_RPN is written. + */ +#define SPRN_MI_TWC 789 +#define MI_APG 0x000001e0 /* Access protection group (0) */ +#define MI_GUARDED 0x00000010 /* Guarded storage */ +#define MI_PSMASK 0x0000000c /* Mask of page size bits */ +#define MI_PS8MEG 0x0000000c /* 8M page size */ +#define MI_PS512K 0x00000004 /* 512K page size */ +#define MI_PS4K_16K 0x00000000 /* 4K or 16K page size */ +#define MI_SVALID 0x00000001 /* Segment entry is valid */ + /* Reset value is undefined */ + +/* Real page number. Defined by the pte. Writing this register + * causes a TLB entry to be created for the instruction TLB, using + * additional information from the MI_EPN, and MI_TWC registers. + */ +#define SPRN_MI_RPN 790 + +/* Define an RPN value for mapping kernel memory to large virtual + * pages for boot initialization. This has real page number of 0, + * large page size, shared page, cache enabled, and valid. + * Also mark all subpages valid and write access. + */ +#define MI_BOOTINIT 0x000001fd + +#define SPRN_MD_CTR 792 /* Data TLB control register */ +#define MD_GPM 0x80000000 /* Set domain manager mode */ +#define MD_PPM 0x40000000 /* Set subpage protection */ +#define MD_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */ +#define MD_WTDEF 0x10000000 /* Set writethrough when MMU dis */ +#define MD_RSV4I 0x08000000 /* Reserve 4 TLB entries */ +#define MD_TWAM 0x04000000 /* Use 4K page hardware assist */ +#define MD_PPCS 0x02000000 /* Use MI_RPN prob/priv state */ +#define MD_IDXMASK 0x00001f00 /* TLB index to be loaded */ +#define MD_RESETVAL 0x04000000 /* Value of register at reset */ + +#define SPRN_M_CASID 793 /* Address space ID (context) to match */ +#define MC_ASIDMASK 0x0000000f /* Bits used for ASID value */ + + +/* These are the Ks and Kp from the PowerPC books. For proper operation, + * Ks = 0, Kp = 1. + */ +#define SPRN_MD_AP 794 +#define MD_Ks 0x80000000 /* Should not be set */ +#define MD_Kp 0x40000000 /* Should always be set */ + +/* The effective page number register. When read, contains the information + * about the last instruction TLB miss. When MD_RPN is written, bits in + * this register are used to create the TLB entry. + */ +#define SPRN_MD_EPN 795 +#define MD_EPNMASK 0xfffff000 /* Effective page number for entry */ +#define MD_EVALID 0x00000200 /* Entry is valid */ +#define MD_ASIDMASK 0x0000000f /* ASID match value */ + /* Reset value is undefined */ + +/* The pointer to the base address of the first level page table. + * During a software tablewalk, reading this register provides the address + * of the entry associated with MD_EPN. + */ +#define SPRN_M_TWB 796 +#define M_L1TB 0xfffff000 /* Level 1 table base address */ +#define M_L1INDX 0x00000ffc /* Level 1 index, when read */ + /* Reset value is undefined */ + +/* A "level 1" or "segment" or whatever you want to call it register. + * For the data TLB, it contains bits that get loaded into the TLB entry + * when the MD_RPN is written. It is also provides the hardware assist + * for finding the PTE address during software tablewalk. + */ +#define SPRN_MD_TWC 797 +#define MD_L2TB 0xfffff000 /* Level 2 table base address */ +#define MD_L2INDX 0xfffffe00 /* Level 2 index (*pte), when read */ +#define MD_APG 0x000001e0 /* Access protection group (0) */ +#define MD_GUARDED 0x00000010 /* Guarded storage */ +#define MD_PSMASK 0x0000000c /* Mask of page size bits */ +#define MD_PS8MEG 0x0000000c /* 8M page size */ +#define MD_PS512K 0x00000004 /* 512K page size */ +#define MD_PS4K_16K 0x00000000 /* 4K or 16K page size */ +#define MD_WT 0x00000002 /* Use writethrough page attribute */ +#define MD_SVALID 0x00000001 /* Segment entry is valid */ + /* Reset value is undefined */ + + +/* Real page number. Defined by the pte. Writing this register + * causes a TLB entry to be created for the data TLB, using + * additional information from the MD_EPN, and MD_TWC registers. + */ +#define SPRN_MD_RPN 798 + +/* This is a temporary storage register that could be used to save + * a processor working register during a tablewalk. + */ +#define SPRN_M_TW 799 + +#ifndef __ASSEMBLY__ +typedef struct { + unsigned long id; + unsigned long vdso_base; +} mm_context_t; +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_MMU_8XX_H_ */ diff --git a/arch/powerpc/include/asm/mmu-fsl-booke.h b/arch/powerpc/include/asm/mmu-fsl-booke.h new file mode 100644 index 000000000000..925d93cf64d8 --- /dev/null +++ b/arch/powerpc/include/asm/mmu-fsl-booke.h @@ -0,0 +1,82 @@ +#ifndef _ASM_POWERPC_MMU_FSL_BOOKE_H_ +#define _ASM_POWERPC_MMU_FSL_BOOKE_H_ +/* + * Freescale Book-E MMU support + */ + +/* Book-E defined page sizes */ +#define BOOKE_PAGESZ_1K 0 +#define BOOKE_PAGESZ_4K 1 +#define BOOKE_PAGESZ_16K 2 +#define BOOKE_PAGESZ_64K 3 +#define BOOKE_PAGESZ_256K 4 +#define BOOKE_PAGESZ_1M 5 +#define BOOKE_PAGESZ_4M 6 +#define BOOKE_PAGESZ_16M 7 +#define BOOKE_PAGESZ_64M 8 +#define BOOKE_PAGESZ_256M 9 +#define BOOKE_PAGESZ_1GB 10 +#define BOOKE_PAGESZ_4GB 11 +#define BOOKE_PAGESZ_16GB 12 +#define BOOKE_PAGESZ_64GB 13 +#define BOOKE_PAGESZ_256GB 14 +#define BOOKE_PAGESZ_1TB 15 + +#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000) +#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000) +#define MAS0_NV(x) ((x) & 0x00000FFF) + +#define MAS1_VALID 0x80000000 +#define MAS1_IPROT 0x40000000 +#define MAS1_TID(x) ((x << 16) & 0x3FFF0000) +#define MAS1_TS 0x00001000 +#define MAS1_TSIZE(x) ((x << 8) & 0x00000F00) + +#define MAS2_EPN 0xFFFFF000 +#define MAS2_X0 0x00000040 +#define MAS2_X1 0x00000020 +#define MAS2_W 0x00000010 +#define MAS2_I 0x00000008 +#define MAS2_M 0x00000004 +#define MAS2_G 0x00000002 +#define MAS2_E 0x00000001 + +#define MAS3_RPN 0xFFFFF000 +#define MAS3_U0 0x00000200 +#define MAS3_U1 0x00000100 +#define MAS3_U2 0x00000080 +#define MAS3_U3 0x00000040 +#define MAS3_UX 0x00000020 +#define MAS3_SX 0x00000010 +#define MAS3_UW 0x00000008 +#define MAS3_SW 0x00000004 +#define MAS3_UR 0x00000002 +#define MAS3_SR 0x00000001 + +#define MAS4_TLBSELD(x) MAS0_TLBSEL(x) +#define MAS4_TIDDSEL 0x000F0000 +#define MAS4_TSIZED(x) MAS1_TSIZE(x) +#define MAS4_X0D 0x00000040 +#define MAS4_X1D 0x00000020 +#define MAS4_WD 0x00000010 +#define MAS4_ID 0x00000008 +#define MAS4_MD 0x00000004 +#define MAS4_GD 0x00000002 +#define MAS4_ED 0x00000001 + +#define MAS6_SPID0 0x3FFF0000 +#define MAS6_SPID1 0x00007FFE +#define MAS6_SAS 0x00000001 +#define MAS6_SPID MAS6_SPID0 + +#define MAS7_RPN 0xFFFFFFFF + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long id; + unsigned long vdso_base; +} mm_context_t; +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_MMU_FSL_BOOKE_H_ */ diff --git a/arch/powerpc/include/asm/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h new file mode 100644 index 000000000000..16b1a1e77e64 --- /dev/null +++ b/arch/powerpc/include/asm/mmu-hash32.h @@ -0,0 +1,83 @@ +#ifndef _ASM_POWERPC_MMU_HASH32_H_ +#define _ASM_POWERPC_MMU_HASH32_H_ +/* + * 32-bit hash table MMU support + */ + +/* + * BATs + */ + +/* Block size masks */ +#define BL_128K 0x000 +#define BL_256K 0x001 +#define BL_512K 0x003 +#define BL_1M 0x007 +#define BL_2M 0x00F +#define BL_4M 0x01F +#define BL_8M 0x03F +#define BL_16M 0x07F +#define BL_32M 0x0FF +#define BL_64M 0x1FF +#define BL_128M 0x3FF +#define BL_256M 0x7FF + +/* BAT Access Protection */ +#define BPP_XX 0x00 /* No access */ +#define BPP_RX 0x01 /* Read only */ +#define BPP_RW 0x02 /* Read/write */ + +#ifndef __ASSEMBLY__ +/* Contort a phys_addr_t into the right format/bits for a BAT */ +#ifdef CONFIG_PHYS_64BIT +#define BAT_PHYS_ADDR(x) ((u32)((x & 0x00000000fffe0000ULL) | \ + ((x & 0x0000000e00000000ULL) >> 24) | \ + ((x & 0x0000000100000000ULL) >> 30))) +#else +#define BAT_PHYS_ADDR(x) (x) +#endif + +struct ppc_bat { + u32 batu; + u32 batl; +}; +#endif /* !__ASSEMBLY__ */ + +/* + * Hash table + */ + +/* Values for PP (assumes Ks=0, Kp=1) */ +#define PP_RWXX 0 /* Supervisor read/write, User none */ +#define PP_RWRX 1 /* Supervisor read/write, User read */ +#define PP_RWRW 2 /* Supervisor read/write, User read/write */ +#define PP_RXRX 3 /* Supervisor read, User read */ + +#ifndef __ASSEMBLY__ + +/* Hardware Page Table Entry */ +struct hash_pte { + unsigned long v:1; /* Entry is valid */ + unsigned long vsid:24; /* Virtual segment identifier */ + unsigned long h:1; /* Hash algorithm indicator */ + unsigned long api:6; /* Abbreviated page index */ + unsigned long rpn:20; /* Real (physical) page number */ + unsigned long :3; /* Unused */ + unsigned long r:1; /* Referenced */ + unsigned long c:1; /* Changed */ + unsigned long w:1; /* Write-thru cache mode */ + unsigned long i:1; /* Cache inhibited */ + unsigned long m:1; /* Memory coherence */ + unsigned long g:1; /* Guarded */ + unsigned long :1; /* Unused */ + unsigned long pp:2; /* Page protection */ +}; + +typedef struct { + unsigned long id; + unsigned long vdso_base; +} mm_context_t; + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_MMU_HASH32_H_ */ diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h new file mode 100644 index 000000000000..19c7a9403490 --- /dev/null +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -0,0 +1,478 @@ +#ifndef _ASM_POWERPC_MMU_HASH64_H_ +#define _ASM_POWERPC_MMU_HASH64_H_ +/* + * PowerPC64 memory management structures + * + * Dave Engebretsen & Mike Corrigan <{engebret|mikejc}@us.ibm.com> + * PPC64 rework. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include + +/* + * Segment table + */ + +#define STE_ESID_V 0x80 +#define STE_ESID_KS 0x20 +#define STE_ESID_KP 0x10 +#define STE_ESID_N 0x08 + +#define STE_VSID_SHIFT 12 + +/* Location of cpu0's segment table */ +#define STAB0_PAGE 0x6 +#define STAB0_OFFSET (STAB0_PAGE << 12) +#define STAB0_PHYS_ADDR (STAB0_OFFSET + PHYSICAL_START) + +#ifndef __ASSEMBLY__ +extern char initial_stab[]; +#endif /* ! __ASSEMBLY */ + +/* + * SLB + */ + +#define SLB_NUM_BOLTED 3 +#define SLB_CACHE_ENTRIES 8 + +/* Bits in the SLB ESID word */ +#define SLB_ESID_V ASM_CONST(0x0000000008000000) /* valid */ + +/* Bits in the SLB VSID word */ +#define SLB_VSID_SHIFT 12 +#define SLB_VSID_SHIFT_1T 24 +#define SLB_VSID_SSIZE_SHIFT 62 +#define SLB_VSID_B ASM_CONST(0xc000000000000000) +#define SLB_VSID_B_256M ASM_CONST(0x0000000000000000) +#define SLB_VSID_B_1T ASM_CONST(0x4000000000000000) +#define SLB_VSID_KS ASM_CONST(0x0000000000000800) +#define SLB_VSID_KP ASM_CONST(0x0000000000000400) +#define SLB_VSID_N ASM_CONST(0x0000000000000200) /* no-execute */ +#define SLB_VSID_L ASM_CONST(0x0000000000000100) +#define SLB_VSID_C ASM_CONST(0x0000000000000080) /* class */ +#define SLB_VSID_LP ASM_CONST(0x0000000000000030) +#define SLB_VSID_LP_00 ASM_CONST(0x0000000000000000) +#define SLB_VSID_LP_01 ASM_CONST(0x0000000000000010) +#define SLB_VSID_LP_10 ASM_CONST(0x0000000000000020) +#define SLB_VSID_LP_11 ASM_CONST(0x0000000000000030) +#define SLB_VSID_LLP (SLB_VSID_L|SLB_VSID_LP) + +#define SLB_VSID_KERNEL (SLB_VSID_KP) +#define SLB_VSID_USER (SLB_VSID_KP|SLB_VSID_KS|SLB_VSID_C) + +#define SLBIE_C (0x08000000) +#define SLBIE_SSIZE_SHIFT 25 + +/* + * Hash table + */ + +#define HPTES_PER_GROUP 8 + +#define HPTE_V_SSIZE_SHIFT 62 +#define HPTE_V_AVPN_SHIFT 7 +#define HPTE_V_AVPN ASM_CONST(0x3fffffffffffff80) +#define HPTE_V_AVPN_VAL(x) (((x) & HPTE_V_AVPN) >> HPTE_V_AVPN_SHIFT) +#define HPTE_V_COMPARE(x,y) (!(((x) ^ (y)) & 0xffffffffffffff80UL)) +#define HPTE_V_BOLTED ASM_CONST(0x0000000000000010) +#define HPTE_V_LOCK ASM_CONST(0x0000000000000008) +#define HPTE_V_LARGE ASM_CONST(0x0000000000000004) +#define HPTE_V_SECONDARY ASM_CONST(0x0000000000000002) +#define HPTE_V_VALID ASM_CONST(0x0000000000000001) + +#define HPTE_R_PP0 ASM_CONST(0x8000000000000000) +#define HPTE_R_TS ASM_CONST(0x4000000000000000) +#define HPTE_R_RPN_SHIFT 12 +#define HPTE_R_RPN ASM_CONST(0x3ffffffffffff000) +#define HPTE_R_FLAGS ASM_CONST(0x00000000000003ff) +#define HPTE_R_PP ASM_CONST(0x0000000000000003) +#define HPTE_R_N ASM_CONST(0x0000000000000004) +#define HPTE_R_C ASM_CONST(0x0000000000000080) +#define HPTE_R_R ASM_CONST(0x0000000000000100) + +#define HPTE_V_1TB_SEG ASM_CONST(0x4000000000000000) +#define HPTE_V_VRMA_MASK ASM_CONST(0x4001ffffff000000) + +/* Values for PP (assumes Ks=0, Kp=1) */ +/* pp0 will always be 0 for linux */ +#define PP_RWXX 0 /* Supervisor read/write, User none */ +#define PP_RWRX 1 /* Supervisor read/write, User read */ +#define PP_RWRW 2 /* Supervisor read/write, User read/write */ +#define PP_RXRX 3 /* Supervisor read, User read */ + +#ifndef __ASSEMBLY__ + +struct hash_pte { + unsigned long v; + unsigned long r; +}; + +extern struct hash_pte *htab_address; +extern unsigned long htab_size_bytes; +extern unsigned long htab_hash_mask; + +/* + * Page size definition + * + * shift : is the "PAGE_SHIFT" value for that page size + * sllp : is a bit mask with the value of SLB L || LP to be or'ed + * directly to a slbmte "vsid" value + * penc : is the HPTE encoding mask for the "LP" field: + * + */ +struct mmu_psize_def +{ + unsigned int shift; /* number of bits */ + unsigned int penc; /* HPTE encoding */ + unsigned int tlbiel; /* tlbiel supported for that page size */ + unsigned long avpnm; /* bits to mask out in AVPN in the HPTE */ + unsigned long sllp; /* SLB L||LP (exact mask to use in slbmte) */ +}; + +#endif /* __ASSEMBLY__ */ + +/* + * The kernel use the constants below to index in the page sizes array. + * The use of fixed constants for this purpose is better for performances + * of the low level hash refill handlers. + * + * A non supported page size has a "shift" field set to 0 + * + * Any new page size being implemented can get a new entry in here. Whether + * the kernel will use it or not is a different matter though. The actual page + * size used by hugetlbfs is not defined here and may be made variable + */ + +#define MMU_PAGE_4K 0 /* 4K */ +#define MMU_PAGE_64K 1 /* 64K */ +#define MMU_PAGE_64K_AP 2 /* 64K Admixed (in a 4K segment) */ +#define MMU_PAGE_1M 3 /* 1M */ +#define MMU_PAGE_16M 4 /* 16M */ +#define MMU_PAGE_16G 5 /* 16G */ +#define MMU_PAGE_COUNT 6 + +/* + * Segment sizes. + * These are the values used by hardware in the B field of + * SLB entries and the first dword of MMU hashtable entries. + * The B field is 2 bits; the values 2 and 3 are unused and reserved. + */ +#define MMU_SEGSIZE_256M 0 +#define MMU_SEGSIZE_1T 1 + + +#ifndef __ASSEMBLY__ + +/* + * The current system page and segment sizes + */ +extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; +extern int mmu_linear_psize; +extern int mmu_virtual_psize; +extern int mmu_vmalloc_psize; +extern int mmu_vmemmap_psize; +extern int mmu_io_psize; +extern int mmu_kernel_ssize; +extern int mmu_highuser_ssize; +extern u16 mmu_slb_size; +extern unsigned long tce_alloc_start, tce_alloc_end; + +/* + * If the processor supports 64k normal pages but not 64k cache + * inhibited pages, we have to be prepared to switch processes + * to use 4k pages when they create cache-inhibited mappings. + * If this is the case, mmu_ci_restrictions will be set to 1. + */ +extern int mmu_ci_restrictions; + +#ifdef CONFIG_HUGETLB_PAGE +/* + * The page size indexes of the huge pages for use by hugetlbfs + */ +extern unsigned int mmu_huge_psizes[MMU_PAGE_COUNT]; + +#endif /* CONFIG_HUGETLB_PAGE */ + +/* + * This function sets the AVPN and L fields of the HPTE appropriately + * for the page size + */ +static inline unsigned long hpte_encode_v(unsigned long va, int psize, + int ssize) +{ + unsigned long v; + v = (va >> 23) & ~(mmu_psize_defs[psize].avpnm); + v <<= HPTE_V_AVPN_SHIFT; + if (psize != MMU_PAGE_4K) + v |= HPTE_V_LARGE; + v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT; + return v; +} + +/* + * This function sets the ARPN, and LP fields of the HPTE appropriately + * for the page size. We assume the pa is already "clean" that is properly + * aligned for the requested page size + */ +static inline unsigned long hpte_encode_r(unsigned long pa, int psize) +{ + unsigned long r; + + /* A 4K page needs no special encoding */ + if (psize == MMU_PAGE_4K) + return pa & HPTE_R_RPN; + else { + unsigned int penc = mmu_psize_defs[psize].penc; + unsigned int shift = mmu_psize_defs[psize].shift; + return (pa & ~((1ul << shift) - 1)) | (penc << 12); + } + return r; +} + +/* + * Build a VA given VSID, EA and segment size + */ +static inline unsigned long hpt_va(unsigned long ea, unsigned long vsid, + int ssize) +{ + if (ssize == MMU_SEGSIZE_256M) + return (vsid << 28) | (ea & 0xfffffffUL); + return (vsid << 40) | (ea & 0xffffffffffUL); +} + +/* + * This hashes a virtual address + */ + +static inline unsigned long hpt_hash(unsigned long va, unsigned int shift, + int ssize) +{ + unsigned long hash, vsid; + + if (ssize == MMU_SEGSIZE_256M) { + hash = (va >> 28) ^ ((va & 0x0fffffffUL) >> shift); + } else { + vsid = va >> 40; + hash = vsid ^ (vsid << 25) ^ ((va & 0xffffffffffUL) >> shift); + } + return hash & 0x7fffffffffUL; +} + +extern int __hash_page_4K(unsigned long ea, unsigned long access, + unsigned long vsid, pte_t *ptep, unsigned long trap, + unsigned int local, int ssize, int subpage_prot); +extern int __hash_page_64K(unsigned long ea, unsigned long access, + unsigned long vsid, pte_t *ptep, unsigned long trap, + unsigned int local, int ssize); +struct mm_struct; +extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); +extern int hash_huge_page(struct mm_struct *mm, unsigned long access, + unsigned long ea, unsigned long vsid, int local, + unsigned long trap); + +extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, + unsigned long pstart, unsigned long mode, + int psize, int ssize); +extern void set_huge_psize(int psize); +extern void add_gpage(unsigned long addr, unsigned long page_size, + unsigned long number_of_pages); +extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr); + +extern void htab_initialize(void); +extern void htab_initialize_secondary(void); +extern void hpte_init_native(void); +extern void hpte_init_lpar(void); +extern void hpte_init_iSeries(void); +extern void hpte_init_beat(void); +extern void hpte_init_beat_v3(void); + +extern void stabs_alloc(void); +extern void slb_initialize(void); +extern void slb_flush_and_rebolt(void); +extern void stab_initialize(unsigned long stab); + +extern void slb_vmalloc_update(void); +#endif /* __ASSEMBLY__ */ + +/* + * VSID allocation + * + * We first generate a 36-bit "proto-VSID". For kernel addresses this + * is equal to the ESID, for user addresses it is: + * (context << 15) | (esid & 0x7fff) + * + * The two forms are distinguishable because the top bit is 0 for user + * addresses, whereas the top two bits are 1 for kernel addresses. + * Proto-VSIDs with the top two bits equal to 0b10 are reserved for + * now. + * + * The proto-VSIDs are then scrambled into real VSIDs with the + * multiplicative hash: + * + * VSID = (proto-VSID * VSID_MULTIPLIER) % VSID_MODULUS + * where VSID_MULTIPLIER = 268435399 = 0xFFFFFC7 + * VSID_MODULUS = 2^36-1 = 0xFFFFFFFFF + * + * This scramble is only well defined for proto-VSIDs below + * 0xFFFFFFFFF, so both proto-VSID and actual VSID 0xFFFFFFFFF are + * reserved. VSID_MULTIPLIER is prime, so in particular it is + * co-prime to VSID_MODULUS, making this a 1:1 scrambling function. + * Because the modulus is 2^n-1 we can compute it efficiently without + * a divide or extra multiply (see below). + * + * This scheme has several advantages over older methods: + * + * - We have VSIDs allocated for every kernel address + * (i.e. everything above 0xC000000000000000), except the very top + * segment, which simplifies several things. + * + * - We allow for 15 significant bits of ESID and 20 bits of + * context for user addresses. i.e. 8T (43 bits) of address space for + * up to 1M contexts (although the page table structure and context + * allocation will need changes to take advantage of this). + * + * - The scramble function gives robust scattering in the hash + * table (at least based on some initial results). The previous + * method was more susceptible to pathological cases giving excessive + * hash collisions. + */ +/* + * WARNING - If you change these you must make sure the asm + * implementations in slb_allocate (slb_low.S), do_stab_bolted + * (head.S) and ASM_VSID_SCRAMBLE (below) are changed accordingly. + * + * You'll also need to change the precomputed VSID values in head.S + * which are used by the iSeries firmware. + */ + +#define VSID_MULTIPLIER_256M ASM_CONST(200730139) /* 28-bit prime */ +#define VSID_BITS_256M 36 +#define VSID_MODULUS_256M ((1UL<= \ + * 2^36-1, then r3+1 has the 2^36 bit set. So, if r3+1 has \ + * the bit clear, r3 already has the answer we want, if it \ + * doesn't, the answer is the low 36 bits of r3+1. So in all \ + * cases the answer is the low 36 bits of (r3 + ((r3+1) >> 36))*/\ + addi rx,rt,1; \ + srdi rx,rx,VSID_BITS_##size; /* extract 2^VSID_BITS bit */ \ + add rt,rt,rx + + +#ifndef __ASSEMBLY__ + +typedef unsigned long mm_context_id_t; + +typedef struct { + mm_context_id_t id; + u16 user_psize; /* page size index */ + +#ifdef CONFIG_PPC_MM_SLICES + u64 low_slices_psize; /* SLB page size encodings */ + u64 high_slices_psize; /* 4 bits per slice for now */ +#else + u16 sllp; /* SLB page size encoding */ +#endif + unsigned long vdso_base; +} mm_context_t; + + +#if 0 +/* + * The code below is equivalent to this function for arguments + * < 2^VSID_BITS, which is all this should ever be called + * with. However gcc is not clever enough to compute the + * modulus (2^n-1) without a second multiply. + */ +#define vsid_scrample(protovsid, size) \ + ((((protovsid) * VSID_MULTIPLIER_##size) % VSID_MODULUS_##size)) + +#else /* 1 */ +#define vsid_scramble(protovsid, size) \ + ({ \ + unsigned long x; \ + x = (protovsid) * VSID_MULTIPLIER_##size; \ + x = (x >> VSID_BITS_##size) + (x & VSID_MODULUS_##size); \ + (x + ((x+1) >> VSID_BITS_##size)) & VSID_MODULUS_##size; \ + }) +#endif /* 1 */ + +/* This is only valid for addresses >= KERNELBASE */ +static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize) +{ + if (ssize == MMU_SEGSIZE_256M) + return vsid_scramble(ea >> SID_SHIFT, 256M); + return vsid_scramble(ea >> SID_SHIFT_1T, 1T); +} + +/* Returns the segment size indicator for a user address */ +static inline int user_segment_size(unsigned long addr) +{ + /* Use 1T segments if possible for addresses >= 1T */ + if (addr >= (1UL << SID_SHIFT_1T)) + return mmu_highuser_ssize; + return MMU_SEGSIZE_256M; +} + +/* This is only valid for user addresses (which are below 2^44) */ +static inline unsigned long get_vsid(unsigned long context, unsigned long ea, + int ssize) +{ + if (ssize == MMU_SEGSIZE_256M) + return vsid_scramble((context << USER_ESID_BITS) + | (ea >> SID_SHIFT), 256M); + return vsid_scramble((context << USER_ESID_BITS_1T) + | (ea >> SID_SHIFT_1T), 1T); +} + +/* + * This is only used on legacy iSeries in lparmap.c, + * hence the 256MB segment assumption. + */ +#define VSID_SCRAMBLE(pvsid) (((pvsid) * VSID_MULTIPLIER_256M) % \ + VSID_MODULUS_256M) +#define KERNEL_VSID(ea) VSID_SCRAMBLE(GET_ESID(ea)) + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_MMU_HASH64_H_ */ diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h new file mode 100644 index 000000000000..4c0e1b4f975c --- /dev/null +++ b/arch/powerpc/include/asm/mmu.h @@ -0,0 +1,26 @@ +#ifndef _ASM_POWERPC_MMU_H_ +#define _ASM_POWERPC_MMU_H_ +#ifdef __KERNEL__ + +#ifdef CONFIG_PPC64 +/* 64-bit classic hash table MMU */ +# include +#elif defined(CONFIG_PPC_STD_MMU) +/* 32-bit classic hash table MMU */ +# include +#elif defined(CONFIG_40x) +/* 40x-style software loaded TLB */ +# include +#elif defined(CONFIG_44x) +/* 44x-style software loaded TLB */ +# include +#elif defined(CONFIG_FSL_BOOKE) +/* Freescale Book-E software loaded TLB */ +# include +#elif defined (CONFIG_PPC_8xx) +/* Motorola/Freescale 8xx software loaded TLB */ +# include +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MMU_H_ */ diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h new file mode 100644 index 000000000000..9102b8bf0ead --- /dev/null +++ b/arch/powerpc/include/asm/mmu_context.h @@ -0,0 +1,280 @@ +#ifndef __ASM_POWERPC_MMU_CONTEXT_H +#define __ASM_POWERPC_MMU_CONTEXT_H +#ifdef __KERNEL__ + +#include +#include +#include + +#ifndef CONFIG_PPC64 +#include +#include + +/* + * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs + * (virtual segment identifiers) for each context. Although the + * hardware supports 24-bit VSIDs, and thus >1 million contexts, + * we only use 32,768 of them. That is ample, since there can be + * at most around 30,000 tasks in the system anyway, and it means + * that we can use a bitmap to indicate which contexts are in use. + * Using a bitmap means that we entirely avoid all of the problems + * that we used to have when the context number overflowed, + * particularly on SMP systems. + * -- paulus. + */ + +/* + * This function defines the mapping from contexts to VSIDs (virtual + * segment IDs). We use a skew on both the context and the high 4 bits + * of the 32-bit virtual address (the "effective segment ID") in order + * to spread out the entries in the MMU hash table. Note, if this + * function is changed then arch/ppc/mm/hashtable.S will have to be + * changed to correspond. + */ +#define CTX_TO_VSID(ctx, va) (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \ + & 0xffffff) + +/* + The MPC8xx has only 16 contexts. We rotate through them on each + task switch. A better way would be to keep track of tasks that + own contexts, and implement an LRU usage. That way very active + tasks don't always have to pay the TLB reload overhead. The + kernel pages are mapped shared, so the kernel can run on behalf + of any task that makes a kernel entry. Shared does not mean they + are not protected, just that the ASID comparison is not performed. + -- Dan + + The IBM4xx has 256 contexts, so we can just rotate through these + as a way of "switching" contexts. If the TID of the TLB is zero, + the PID/TID comparison is disabled, so we can use a TID of zero + to represent all kernel pages as shared among all contexts. + -- Dan + */ + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +#ifdef CONFIG_8xx +#define NO_CONTEXT 16 +#define LAST_CONTEXT 15 +#define FIRST_CONTEXT 0 + +#elif defined(CONFIG_4xx) +#define NO_CONTEXT 256 +#define LAST_CONTEXT 255 +#define FIRST_CONTEXT 1 + +#elif defined(CONFIG_E200) || defined(CONFIG_E500) +#define NO_CONTEXT 256 +#define LAST_CONTEXT 255 +#define FIRST_CONTEXT 1 + +#else + +/* PPC 6xx, 7xx CPUs */ +#define NO_CONTEXT ((unsigned long) -1) +#define LAST_CONTEXT 32767 +#define FIRST_CONTEXT 1 +#endif + +/* + * Set the current MMU context. + * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by + * loading up the segment registers for the user part of the address space. + * + * Since the PGD is immediately available, it is much faster to simply + * pass this along as a second parameter, which is required for 8xx and + * can be used for debugging on all processors (if you happen to have + * an Abatron). + */ +extern void set_context(unsigned long contextid, pgd_t *pgd); + +/* + * Bitmap of contexts in use. + * The size of this bitmap is LAST_CONTEXT + 1 bits. + */ +extern unsigned long context_map[]; + +/* + * This caches the next context number that we expect to be free. + * Its use is an optimization only, we can't rely on this context + * number to be free, but it usually will be. + */ +extern unsigned long next_mmu_context; + +/* + * If we don't have sufficient contexts to give one to every task + * that could be in the system, we need to be able to steal contexts. + * These variables support that. + */ +#if LAST_CONTEXT < 30000 +#define FEW_CONTEXTS 1 +extern atomic_t nr_free_contexts; +extern struct mm_struct *context_mm[LAST_CONTEXT+1]; +extern void steal_context(void); +#endif + +/* + * Get a new mmu context for the address space described by `mm'. + */ +static inline void get_mmu_context(struct mm_struct *mm) +{ + unsigned long ctx; + + if (mm->context.id != NO_CONTEXT) + return; +#ifdef FEW_CONTEXTS + while (atomic_dec_if_positive(&nr_free_contexts) < 0) + steal_context(); +#endif + ctx = next_mmu_context; + while (test_and_set_bit(ctx, context_map)) { + ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx); + if (ctx > LAST_CONTEXT) + ctx = 0; + } + next_mmu_context = (ctx + 1) & LAST_CONTEXT; + mm->context.id = ctx; +#ifdef FEW_CONTEXTS + context_mm[ctx] = mm; +#endif +} + +/* + * Set up the context for a new address space. + */ +static inline int init_new_context(struct task_struct *t, struct mm_struct *mm) +{ + mm->context.id = NO_CONTEXT; + mm->context.vdso_base = 0; + return 0; +} + +/* + * We're finished using the context for an address space. + */ +static inline void destroy_context(struct mm_struct *mm) +{ + preempt_disable(); + if (mm->context.id != NO_CONTEXT) { + clear_bit(mm->context.id, context_map); + mm->context.id = NO_CONTEXT; +#ifdef FEW_CONTEXTS + atomic_inc(&nr_free_contexts); +#endif + } + preempt_enable(); +} + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ +#ifdef CONFIG_ALTIVEC + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + asm volatile ("dssall;\n" +#ifndef CONFIG_POWER4 + "sync;\n" /* G4 needs a sync here, G5 apparently not */ +#endif + : : ); +#endif /* CONFIG_ALTIVEC */ + + tsk->thread.pgdir = next->pgd; + + /* No need to flush userspace segments if the mm doesnt change */ + if (prev == next) + return; + + /* Setup new userspace context */ + get_mmu_context(next); + set_context(next->context.id, next->pgd); +} + +#define deactivate_mm(tsk,mm) do { } while (0) + +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +#define activate_mm(active_mm, mm) switch_mm(active_mm, mm, current) + +extern void mmu_context_init(void); + + +#else + +#include +#include +#include + +/* + * Copyright (C) 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +static inline void enter_lazy_tlb(struct mm_struct *mm, + struct task_struct *tsk) +{ +} + +/* + * The proto-VSID space has 2^35 - 1 segments available for user mappings. + * Each segment contains 2^28 bytes. Each context maps 2^44 bytes, + * so we can support 2^19-1 contexts (19 == 35 + 28 - 44). + */ +#define NO_CONTEXT 0 +#define MAX_CONTEXT ((1UL << 19) - 1) + +extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); +extern void destroy_context(struct mm_struct *mm); + +extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm); +extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm); + +/* + * switch_mm is the entry point called from the architecture independent + * code in kernel/sched.c + */ +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + if (!cpu_isset(smp_processor_id(), next->cpu_vm_mask)) + cpu_set(smp_processor_id(), next->cpu_vm_mask); + + /* No need to flush userspace segments if the mm doesnt change */ + if (prev == next) + return; + +#ifdef CONFIG_ALTIVEC + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + asm volatile ("dssall"); +#endif /* CONFIG_ALTIVEC */ + + if (cpu_has_feature(CPU_FTR_SLB)) + switch_slb(tsk, next); + else + switch_stab(tsk, next); +} + +#define deactivate_mm(tsk,mm) do { } while (0) + +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next) +{ + unsigned long flags; + + local_irq_save(flags); + switch_mm(prev, next, current); + local_irq_restore(flags); +} + +#endif /* CONFIG_PPC64 */ +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_MMU_CONTEXT_H */ diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h new file mode 100644 index 000000000000..19f299b7e256 --- /dev/null +++ b/arch/powerpc/include/asm/mmzone.h @@ -0,0 +1,47 @@ +/* + * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99 + * + * PowerPC64 port: + * Copyright (C) 2002 Anton Blanchard, IBM Corp. + */ +#ifndef _ASM_MMZONE_H_ +#define _ASM_MMZONE_H_ +#ifdef __KERNEL__ + + +/* + * generic non-linear memory support: + * + * 1) we will not split memory into more chunks than will fit into the + * flags field of the struct page + */ + +#ifdef CONFIG_NEED_MULTIPLE_NODES + +extern struct pglist_data *node_data[]; +/* + * Return a pointer to the node data for node n. + */ +#define NODE_DATA(nid) (node_data[nid]) + +/* + * Following are specific to this numa platform. + */ + +extern int numa_cpu_lookup_table[]; +extern cpumask_t numa_cpumask_lookup_table[]; +#ifdef CONFIG_MEMORY_HOTPLUG +extern unsigned long max_pfn; +#endif + +/* + * Following are macros that each numa implmentation must define. + */ + +#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) +#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn) + +#endif /* CONFIG_NEED_MULTIPLE_NODES */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_MMZONE_H_ */ diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h new file mode 100644 index 000000000000..e5f14b13ccf0 --- /dev/null +++ b/arch/powerpc/include/asm/module.h @@ -0,0 +1,77 @@ +#ifndef _ASM_POWERPC_MODULE_H +#define _ASM_POWERPC_MODULE_H +#ifdef __KERNEL__ + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include + + +#ifndef __powerpc64__ +/* + * Thanks to Paul M for explaining this. + * + * PPC can only do rel jumps += 32MB, and often the kernel and other + * modules are furthur away than this. So, we jump to a table of + * trampolines attached to the module (the Procedure Linkage Table) + * whenever that happens. + */ + +struct ppc_plt_entry { + /* 16 byte jump instruction sequence (4 instructions) */ + unsigned int jump[4]; +}; +#endif /* __powerpc64__ */ + + +struct mod_arch_specific { +#ifdef __powerpc64__ + unsigned int stubs_section; /* Index of stubs section in module */ + unsigned int toc_section; /* What section is the TOC? */ +#else + /* Indices of PLT sections within module. */ + unsigned int core_plt_section; + unsigned int init_plt_section; +#endif + + /* List of BUG addresses, source line numbers and filenames */ + struct list_head bug_list; + struct bug_entry *bug_table; + unsigned int num_bugs; +}; + +/* + * Select ELF headers. + * Make empty section for module_frob_arch_sections to expand. + */ + +#ifdef __powerpc64__ +# define Elf_Shdr Elf64_Shdr +# define Elf_Sym Elf64_Sym +# define Elf_Ehdr Elf64_Ehdr +# ifdef MODULE + asm(".section .stubs,\"ax\",@nobits; .align 3; .previous"); +# endif +#else +# define Elf_Shdr Elf32_Shdr +# define Elf_Sym Elf32_Sym +# define Elf_Ehdr Elf32_Ehdr +# ifdef MODULE + asm(".section .plt,\"ax\",@nobits; .align 3; .previous"); + asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous"); +# endif /* MODULE */ +#endif + + +struct exception_table_entry; +void sort_ex_table(struct exception_table_entry *start, + struct exception_table_entry *finish); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MODULE_H */ diff --git a/arch/powerpc/include/asm/mpc512x.h b/arch/powerpc/include/asm/mpc512x.h new file mode 100644 index 000000000000..c48a1658eeac --- /dev/null +++ b/arch/powerpc/include/asm/mpc512x.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: John Rigby, , Friday Apr 13 2007 + * + * Description: + * MPC5121 Prototypes and definitions + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_POWERPC_MPC512x_H__ +#define __ASM_POWERPC_MPC512x_H__ + +extern unsigned long mpc512x_find_ips_freq(struct device_node *node); + +#endif /* __ASM_POWERPC_MPC512x_H__ */ + diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h new file mode 100644 index 000000000000..81ef10b6b672 --- /dev/null +++ b/arch/powerpc/include/asm/mpc52xx.h @@ -0,0 +1,295 @@ +/* + * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips + * May need to be cleaned as the port goes on ... + * + * Copyright (C) 2004-2005 Sylvain Munaut + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_POWERPC_MPC52xx_H__ +#define __ASM_POWERPC_MPC52xx_H__ + +#ifndef __ASSEMBLY__ +#include +#include +#endif /* __ASSEMBLY__ */ + +#include + +/* Variants of the 5200(B) */ +#define MPC5200_SVR 0x80110010 +#define MPC5200_SVR_MASK 0xfffffff0 +#define MPC5200B_SVR 0x80110020 +#define MPC5200B_SVR_MASK 0xfffffff0 + +/* ======================================================================== */ +/* Structures mapping of some unit register set */ +/* ======================================================================== */ + +#ifndef __ASSEMBLY__ + +/* Memory Mapping Control */ +struct mpc52xx_mmap_ctl { + u32 mbar; /* MMAP_CTRL + 0x00 */ + + u32 cs0_start; /* MMAP_CTRL + 0x04 */ + u32 cs0_stop; /* MMAP_CTRL + 0x08 */ + u32 cs1_start; /* MMAP_CTRL + 0x0c */ + u32 cs1_stop; /* MMAP_CTRL + 0x10 */ + u32 cs2_start; /* MMAP_CTRL + 0x14 */ + u32 cs2_stop; /* MMAP_CTRL + 0x18 */ + u32 cs3_start; /* MMAP_CTRL + 0x1c */ + u32 cs3_stop; /* MMAP_CTRL + 0x20 */ + u32 cs4_start; /* MMAP_CTRL + 0x24 */ + u32 cs4_stop; /* MMAP_CTRL + 0x28 */ + u32 cs5_start; /* MMAP_CTRL + 0x2c */ + u32 cs5_stop; /* MMAP_CTRL + 0x30 */ + + u32 sdram0; /* MMAP_CTRL + 0x34 */ + u32 sdram1; /* MMAP_CTRL + 0X38 */ + + u32 reserved[4]; /* MMAP_CTRL + 0x3c .. 0x48 */ + + u32 boot_start; /* MMAP_CTRL + 0x4c */ + u32 boot_stop; /* MMAP_CTRL + 0x50 */ + + u32 ipbi_ws_ctrl; /* MMAP_CTRL + 0x54 */ + + u32 cs6_start; /* MMAP_CTRL + 0x58 */ + u32 cs6_stop; /* MMAP_CTRL + 0x5c */ + u32 cs7_start; /* MMAP_CTRL + 0x60 */ + u32 cs7_stop; /* MMAP_CTRL + 0x64 */ +}; + +/* SDRAM control */ +struct mpc52xx_sdram { + u32 mode; /* SDRAM + 0x00 */ + u32 ctrl; /* SDRAM + 0x04 */ + u32 config1; /* SDRAM + 0x08 */ + u32 config2; /* SDRAM + 0x0c */ +}; + +/* SDMA */ +struct mpc52xx_sdma { + u32 taskBar; /* SDMA + 0x00 */ + u32 currentPointer; /* SDMA + 0x04 */ + u32 endPointer; /* SDMA + 0x08 */ + u32 variablePointer; /* SDMA + 0x0c */ + + u8 IntVect1; /* SDMA + 0x10 */ + u8 IntVect2; /* SDMA + 0x11 */ + u16 PtdCntrl; /* SDMA + 0x12 */ + + u32 IntPend; /* SDMA + 0x14 */ + u32 IntMask; /* SDMA + 0x18 */ + + u16 tcr[16]; /* SDMA + 0x1c .. 0x3a */ + + u8 ipr[32]; /* SDMA + 0x3c .. 0x5b */ + + u32 cReqSelect; /* SDMA + 0x5c */ + u32 task_size0; /* SDMA + 0x60 */ + u32 task_size1; /* SDMA + 0x64 */ + u32 MDEDebug; /* SDMA + 0x68 */ + u32 ADSDebug; /* SDMA + 0x6c */ + u32 Value1; /* SDMA + 0x70 */ + u32 Value2; /* SDMA + 0x74 */ + u32 Control; /* SDMA + 0x78 */ + u32 Status; /* SDMA + 0x7c */ + u32 PTDDebug; /* SDMA + 0x80 */ +}; + +/* GPT */ +struct mpc52xx_gpt { + u32 mode; /* GPTx + 0x00 */ + u32 count; /* GPTx + 0x04 */ + u32 pwm; /* GPTx + 0x08 */ + u32 status; /* GPTx + 0X0c */ +}; + +/* GPIO */ +struct mpc52xx_gpio { + u32 port_config; /* GPIO + 0x00 */ + u32 simple_gpioe; /* GPIO + 0x04 */ + u32 simple_ode; /* GPIO + 0x08 */ + u32 simple_ddr; /* GPIO + 0x0c */ + u32 simple_dvo; /* GPIO + 0x10 */ + u32 simple_ival; /* GPIO + 0x14 */ + u8 outo_gpioe; /* GPIO + 0x18 */ + u8 reserved1[3]; /* GPIO + 0x19 */ + u8 outo_dvo; /* GPIO + 0x1c */ + u8 reserved2[3]; /* GPIO + 0x1d */ + u8 sint_gpioe; /* GPIO + 0x20 */ + u8 reserved3[3]; /* GPIO + 0x21 */ + u8 sint_ode; /* GPIO + 0x24 */ + u8 reserved4[3]; /* GPIO + 0x25 */ + u8 sint_ddr; /* GPIO + 0x28 */ + u8 reserved5[3]; /* GPIO + 0x29 */ + u8 sint_dvo; /* GPIO + 0x2c */ + u8 reserved6[3]; /* GPIO + 0x2d */ + u8 sint_inten; /* GPIO + 0x30 */ + u8 reserved7[3]; /* GPIO + 0x31 */ + u16 sint_itype; /* GPIO + 0x34 */ + u16 reserved8; /* GPIO + 0x36 */ + u8 gpio_control; /* GPIO + 0x38 */ + u8 reserved9[3]; /* GPIO + 0x39 */ + u8 sint_istat; /* GPIO + 0x3c */ + u8 sint_ival; /* GPIO + 0x3d */ + u8 bus_errs; /* GPIO + 0x3e */ + u8 reserved10; /* GPIO + 0x3f */ +}; + +#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD 4 +#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5 +#define MPC52xx_GPIO_PCI_DIS (1<<15) + +/* GPIO with WakeUp*/ +struct mpc52xx_gpio_wkup { + u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */ + u8 reserved1[3]; /* GPIO_WKUP + 0x03 */ + u8 wkup_ode; /* GPIO_WKUP + 0x04 */ + u8 reserved2[3]; /* GPIO_WKUP + 0x05 */ + u8 wkup_ddr; /* GPIO_WKUP + 0x08 */ + u8 reserved3[3]; /* GPIO_WKUP + 0x09 */ + u8 wkup_dvo; /* GPIO_WKUP + 0x0C */ + u8 reserved4[3]; /* GPIO_WKUP + 0x0D */ + u8 wkup_inten; /* GPIO_WKUP + 0x10 */ + u8 reserved5[3]; /* GPIO_WKUP + 0x11 */ + u8 wkup_iinten; /* GPIO_WKUP + 0x14 */ + u8 reserved6[3]; /* GPIO_WKUP + 0x15 */ + u16 wkup_itype; /* GPIO_WKUP + 0x18 */ + u8 reserved7[2]; /* GPIO_WKUP + 0x1A */ + u8 wkup_maste; /* GPIO_WKUP + 0x1C */ + u8 reserved8[3]; /* GPIO_WKUP + 0x1D */ + u8 wkup_ival; /* GPIO_WKUP + 0x20 */ + u8 reserved9[3]; /* GPIO_WKUP + 0x21 */ + u8 wkup_istat; /* GPIO_WKUP + 0x24 */ + u8 reserved10[3]; /* GPIO_WKUP + 0x25 */ +}; + +/* XLB Bus control */ +struct mpc52xx_xlb { + u8 reserved[0x40]; + u32 config; /* XLB + 0x40 */ + u32 version; /* XLB + 0x44 */ + u32 status; /* XLB + 0x48 */ + u32 int_enable; /* XLB + 0x4c */ + u32 addr_capture; /* XLB + 0x50 */ + u32 bus_sig_capture; /* XLB + 0x54 */ + u32 addr_timeout; /* XLB + 0x58 */ + u32 data_timeout; /* XLB + 0x5c */ + u32 bus_act_timeout; /* XLB + 0x60 */ + u32 master_pri_enable; /* XLB + 0x64 */ + u32 master_priority; /* XLB + 0x68 */ + u32 base_address; /* XLB + 0x6c */ + u32 snoop_window; /* XLB + 0x70 */ +}; + +#define MPC52xx_XLB_CFG_PLDIS (1 << 31) +#define MPC52xx_XLB_CFG_SNOOP (1 << 15) + +/* Clock Distribution control */ +struct mpc52xx_cdm { + u32 jtag_id; /* CDM + 0x00 reg0 read only */ + u32 rstcfg; /* CDM + 0x04 reg1 read only */ + u32 breadcrumb; /* CDM + 0x08 reg2 */ + + u8 mem_clk_sel; /* CDM + 0x0c reg3 byte0 */ + u8 xlb_clk_sel; /* CDM + 0x0d reg3 byte1 read only */ + u8 ipb_clk_sel; /* CDM + 0x0e reg3 byte2 */ + u8 pci_clk_sel; /* CDM + 0x0f reg3 byte3 */ + + u8 ext_48mhz_en; /* CDM + 0x10 reg4 byte0 */ + u8 fd_enable; /* CDM + 0x11 reg4 byte1 */ + u16 fd_counters; /* CDM + 0x12 reg4 byte2,3 */ + + u32 clk_enables; /* CDM + 0x14 reg5 */ + + u8 osc_disable; /* CDM + 0x18 reg6 byte0 */ + u8 reserved0[3]; /* CDM + 0x19 reg6 byte1,2,3 */ + + u8 ccs_sleep_enable; /* CDM + 0x1c reg7 byte0 */ + u8 osc_sleep_enable; /* CDM + 0x1d reg7 byte1 */ + u8 reserved1; /* CDM + 0x1e reg7 byte2 */ + u8 ccs_qreq_test; /* CDM + 0x1f reg7 byte3 */ + + u8 soft_reset; /* CDM + 0x20 u8 byte0 */ + u8 no_ckstp; /* CDM + 0x21 u8 byte0 */ + u8 reserved2[2]; /* CDM + 0x22 u8 byte1,2,3 */ + + u8 pll_lock; /* CDM + 0x24 reg9 byte0 */ + u8 pll_looselock; /* CDM + 0x25 reg9 byte1 */ + u8 pll_sm_lockwin; /* CDM + 0x26 reg9 byte2 */ + u8 reserved3; /* CDM + 0x27 reg9 byte3 */ + + u16 reserved4; /* CDM + 0x28 reg10 byte0,1 */ + u16 mclken_div_psc1; /* CDM + 0x2a reg10 byte2,3 */ + + u16 reserved5; /* CDM + 0x2c reg11 byte0,1 */ + u16 mclken_div_psc2; /* CDM + 0x2e reg11 byte2,3 */ + + u16 reserved6; /* CDM + 0x30 reg12 byte0,1 */ + u16 mclken_div_psc3; /* CDM + 0x32 reg12 byte2,3 */ + + u16 reserved7; /* CDM + 0x34 reg13 byte0,1 */ + u16 mclken_div_psc6; /* CDM + 0x36 reg13 byte2,3 */ +}; + +#endif /* __ASSEMBLY__ */ + + +/* ========================================================================= */ +/* Prototypes for MPC52xx sysdev */ +/* ========================================================================= */ + +#ifndef __ASSEMBLY__ + +/* mpc52xx_common.c */ +extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node); +extern void mpc5200_setup_xlb_arbiter(void); +extern void mpc52xx_declare_of_platform_devices(void); +extern void mpc52xx_map_common_devices(void); +extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv); +extern void mpc52xx_restart(char *cmd); + +/* mpc52xx_pic.c */ +extern void mpc52xx_init_irq(void); +extern unsigned int mpc52xx_get_irq(void); + +/* mpc52xx_pci.c */ +#ifdef CONFIG_PCI +extern int __init mpc52xx_add_bridge(struct device_node *node); +extern void __init mpc52xx_setup_pci(void); +#else +static inline void mpc52xx_setup_pci(void) { } +#endif + +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_PM +struct mpc52xx_suspend { + void (*board_suspend_prepare)(void __iomem *mbar); + void (*board_resume_finish)(void __iomem *mbar); +}; + +extern struct mpc52xx_suspend mpc52xx_suspend; +extern int __init mpc52xx_pm_init(void); +extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level); + +#ifdef CONFIG_PPC_LITE5200 +extern int __init lite5200_pm_init(void); + +/* lite5200 calls mpc5200 suspend functions, so here they are */ +extern int mpc52xx_pm_prepare(void); +extern int mpc52xx_pm_enter(suspend_state_t); +extern void mpc52xx_pm_finish(void); +extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */ +#endif +#endif /* CONFIG_PM */ + +#endif /* __ASM_POWERPC_MPC52xx_H__ */ + diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h new file mode 100644 index 000000000000..8917ed630565 --- /dev/null +++ b/arch/powerpc/include/asm/mpc52xx_psc.h @@ -0,0 +1,276 @@ +/* + * include/asm-ppc/mpc52xx_psc.h + * + * Definitions of consts/structs to drive the Freescale MPC52xx OnChip + * PSCs. Theses are shared between multiple drivers since a PSC can be + * UART, AC97, IR, I2S, ... So this header is in asm-ppc. + * + * + * Maintainer : Sylvain Munaut + * + * Based/Extracted from some header of the 2.4 originally written by + * Dale Farnsworth + * + * Copyright (C) 2004 Sylvain Munaut + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_MPC52xx_PSC_H__ +#define __ASM_MPC52xx_PSC_H__ + +#include + +/* Max number of PSCs */ +#define MPC52xx_PSC_MAXNUM 6 + +/* Programmable Serial Controller (PSC) status register bits */ +#define MPC52xx_PSC_SR_CDE 0x0080 +#define MPC52xx_PSC_SR_RXRDY 0x0100 +#define MPC52xx_PSC_SR_RXFULL 0x0200 +#define MPC52xx_PSC_SR_TXRDY 0x0400 +#define MPC52xx_PSC_SR_TXEMP 0x0800 +#define MPC52xx_PSC_SR_OE 0x1000 +#define MPC52xx_PSC_SR_PE 0x2000 +#define MPC52xx_PSC_SR_FE 0x4000 +#define MPC52xx_PSC_SR_RB 0x8000 + +/* PSC Command values */ +#define MPC52xx_PSC_RX_ENABLE 0x0001 +#define MPC52xx_PSC_RX_DISABLE 0x0002 +#define MPC52xx_PSC_TX_ENABLE 0x0004 +#define MPC52xx_PSC_TX_DISABLE 0x0008 +#define MPC52xx_PSC_SEL_MODE_REG_1 0x0010 +#define MPC52xx_PSC_RST_RX 0x0020 +#define MPC52xx_PSC_RST_TX 0x0030 +#define MPC52xx_PSC_RST_ERR_STAT 0x0040 +#define MPC52xx_PSC_RST_BRK_CHG_INT 0x0050 +#define MPC52xx_PSC_START_BRK 0x0060 +#define MPC52xx_PSC_STOP_BRK 0x0070 + +/* PSC TxRx FIFO status bits */ +#define MPC52xx_PSC_RXTX_FIFO_ERR 0x0040 +#define MPC52xx_PSC_RXTX_FIFO_UF 0x0020 +#define MPC52xx_PSC_RXTX_FIFO_OF 0x0010 +#define MPC52xx_PSC_RXTX_FIFO_FR 0x0008 +#define MPC52xx_PSC_RXTX_FIFO_FULL 0x0004 +#define MPC52xx_PSC_RXTX_FIFO_ALARM 0x0002 +#define MPC52xx_PSC_RXTX_FIFO_EMPTY 0x0001 + +/* PSC interrupt status/mask bits */ +#define MPC52xx_PSC_IMR_TXRDY 0x0100 +#define MPC52xx_PSC_IMR_RXRDY 0x0200 +#define MPC52xx_PSC_IMR_DB 0x0400 +#define MPC52xx_PSC_IMR_TXEMP 0x0800 +#define MPC52xx_PSC_IMR_ORERR 0x1000 +#define MPC52xx_PSC_IMR_IPC 0x8000 + +/* PSC input port change bit */ +#define MPC52xx_PSC_CTS 0x01 +#define MPC52xx_PSC_DCD 0x02 +#define MPC52xx_PSC_D_CTS 0x10 +#define MPC52xx_PSC_D_DCD 0x20 + +/* PSC mode fields */ +#define MPC52xx_PSC_MODE_5_BITS 0x00 +#define MPC52xx_PSC_MODE_6_BITS 0x01 +#define MPC52xx_PSC_MODE_7_BITS 0x02 +#define MPC52xx_PSC_MODE_8_BITS 0x03 +#define MPC52xx_PSC_MODE_BITS_MASK 0x03 +#define MPC52xx_PSC_MODE_PAREVEN 0x00 +#define MPC52xx_PSC_MODE_PARODD 0x04 +#define MPC52xx_PSC_MODE_PARFORCE 0x08 +#define MPC52xx_PSC_MODE_PARNONE 0x10 +#define MPC52xx_PSC_MODE_ERR 0x20 +#define MPC52xx_PSC_MODE_FFULL 0x40 +#define MPC52xx_PSC_MODE_RXRTS 0x80 + +#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS 0x00 +#define MPC52xx_PSC_MODE_ONE_STOP 0x07 +#define MPC52xx_PSC_MODE_TWO_STOP 0x0f + +#define MPC52xx_PSC_RFNUM_MASK 0x01ff + +#define MPC52xx_PSC_SICR_DTS1 (1 << 29) +#define MPC52xx_PSC_SICR_SHDR (1 << 28) +#define MPC52xx_PSC_SICR_SIM_MASK (0xf << 24) +#define MPC52xx_PSC_SICR_SIM_UART (0x0 << 24) +#define MPC52xx_PSC_SICR_SIM_UART_DCD (0x8 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_8 (0x1 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_16 (0x2 << 24) +#define MPC52xx_PSC_SICR_SIM_AC97 (0x3 << 24) +#define MPC52xx_PSC_SICR_SIM_SIR (0x8 << 24) +#define MPC52xx_PSC_SICR_SIM_SIR_DCD (0xc << 24) +#define MPC52xx_PSC_SICR_SIM_MIR (0x5 << 24) +#define MPC52xx_PSC_SICR_SIM_FIR (0x6 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_24 (0x7 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_32 (0xf << 24) +#define MPC52xx_PSC_SICR_GENCLK (1 << 23) +#define MPC52xx_PSC_SICR_I2S (1 << 22) +#define MPC52xx_PSC_SICR_CLKPOL (1 << 21) +#define MPC52xx_PSC_SICR_SYNCPOL (1 << 20) +#define MPC52xx_PSC_SICR_CELLSLAVE (1 << 19) +#define MPC52xx_PSC_SICR_CELL2XCLK (1 << 18) +#define MPC52xx_PSC_SICR_ESAI (1 << 17) +#define MPC52xx_PSC_SICR_ENAC97 (1 << 16) +#define MPC52xx_PSC_SICR_SPI (1 << 15) +#define MPC52xx_PSC_SICR_MSTR (1 << 14) +#define MPC52xx_PSC_SICR_CPOL (1 << 13) +#define MPC52xx_PSC_SICR_CPHA (1 << 12) +#define MPC52xx_PSC_SICR_USEEOF (1 << 11) +#define MPC52xx_PSC_SICR_DISABLEEOF (1 << 10) + +/* Structure of the hardware registers */ +struct mpc52xx_psc { + u8 mode; /* PSC + 0x00 */ + u8 reserved0[3]; + union { /* PSC + 0x04 */ + u16 status; + u16 clock_select; + } sr_csr; +#define mpc52xx_psc_status sr_csr.status +#define mpc52xx_psc_clock_select sr_csr.clock_select + u16 reserved1; + u8 command; /* PSC + 0x08 */ + u8 reserved2[3]; + union { /* PSC + 0x0c */ + u8 buffer_8; + u16 buffer_16; + u32 buffer_32; + } buffer; +#define mpc52xx_psc_buffer_8 buffer.buffer_8 +#define mpc52xx_psc_buffer_16 buffer.buffer_16 +#define mpc52xx_psc_buffer_32 buffer.buffer_32 + union { /* PSC + 0x10 */ + u8 ipcr; + u8 acr; + } ipcr_acr; +#define mpc52xx_psc_ipcr ipcr_acr.ipcr +#define mpc52xx_psc_acr ipcr_acr.acr + u8 reserved3[3]; + union { /* PSC + 0x14 */ + u16 isr; + u16 imr; + } isr_imr; +#define mpc52xx_psc_isr isr_imr.isr +#define mpc52xx_psc_imr isr_imr.imr + u16 reserved4; + u8 ctur; /* PSC + 0x18 */ + u8 reserved5[3]; + u8 ctlr; /* PSC + 0x1c */ + u8 reserved6[3]; + /* BitClkDiv field of CCR is byte swapped in + * the hardware for mpc5200/b compatibility */ + u32 ccr; /* PSC + 0x20 */ + u32 ac97_slots; /* PSC + 0x24 */ + u32 ac97_cmd; /* PSC + 0x28 */ + u32 ac97_data; /* PSC + 0x2c */ + u8 ivr; /* PSC + 0x30 */ + u8 reserved8[3]; + u8 ip; /* PSC + 0x34 */ + u8 reserved9[3]; + u8 op1; /* PSC + 0x38 */ + u8 reserved10[3]; + u8 op0; /* PSC + 0x3c */ + u8 reserved11[3]; + u32 sicr; /* PSC + 0x40 */ + u8 ircr1; /* PSC + 0x44 */ + u8 reserved13[3]; + u8 ircr2; /* PSC + 0x44 */ + u8 reserved14[3]; + u8 irsdr; /* PSC + 0x4c */ + u8 reserved15[3]; + u8 irmdr; /* PSC + 0x50 */ + u8 reserved16[3]; + u8 irfdr; /* PSC + 0x54 */ + u8 reserved17[3]; +}; + +struct mpc52xx_psc_fifo { + u16 rfnum; /* PSC + 0x58 */ + u16 reserved18; + u16 tfnum; /* PSC + 0x5c */ + u16 reserved19; + u32 rfdata; /* PSC + 0x60 */ + u16 rfstat; /* PSC + 0x64 */ + u16 reserved20; + u8 rfcntl; /* PSC + 0x68 */ + u8 reserved21[5]; + u16 rfalarm; /* PSC + 0x6e */ + u16 reserved22; + u16 rfrptr; /* PSC + 0x72 */ + u16 reserved23; + u16 rfwptr; /* PSC + 0x76 */ + u16 reserved24; + u16 rflrfptr; /* PSC + 0x7a */ + u16 reserved25; + u16 rflwfptr; /* PSC + 0x7e */ + u32 tfdata; /* PSC + 0x80 */ + u16 tfstat; /* PSC + 0x84 */ + u16 reserved26; + u8 tfcntl; /* PSC + 0x88 */ + u8 reserved27[5]; + u16 tfalarm; /* PSC + 0x8e */ + u16 reserved28; + u16 tfrptr; /* PSC + 0x92 */ + u16 reserved29; + u16 tfwptr; /* PSC + 0x96 */ + u16 reserved30; + u16 tflrfptr; /* PSC + 0x9a */ + u16 reserved31; + u16 tflwfptr; /* PSC + 0x9e */ +}; + +#define MPC512x_PSC_FIFO_RESET_SLICE 0x80 +#define MPC512x_PSC_FIFO_ENABLE_SLICE 0x01 +#define MPC512x_PSC_FIFO_ENABLE_DMA 0x04 + +#define MPC512x_PSC_FIFO_EMPTY 0x1 +#define MPC512x_PSC_FIFO_FULL 0x2 +#define MPC512x_PSC_FIFO_ALARM 0x4 +#define MPC512x_PSC_FIFO_URERR 0x8 +#define MPC512x_PSC_FIFO_ORERR 0x01 +#define MPC512x_PSC_FIFO_MEMERROR 0x02 + +struct mpc512x_psc_fifo { + u32 reserved1[10]; + u32 txcmd; /* PSC + 0x80 */ + u32 txalarm; /* PSC + 0x84 */ + u32 txsr; /* PSC + 0x88 */ + u32 txisr; /* PSC + 0x8c */ + u32 tximr; /* PSC + 0x90 */ + u32 txcnt; /* PSC + 0x94 */ + u32 txptr; /* PSC + 0x98 */ + u32 txsz; /* PSC + 0x9c */ + u32 reserved2[7]; + union { + u8 txdata_8; + u16 txdata_16; + u32 txdata_32; + } txdata; /* PSC + 0xbc */ +#define txdata_8 txdata.txdata_8 +#define txdata_16 txdata.txdata_16 +#define txdata_32 txdata.txdata_32 + u32 rxcmd; /* PSC + 0xc0 */ + u32 rxalarm; /* PSC + 0xc4 */ + u32 rxsr; /* PSC + 0xc8 */ + u32 rxisr; /* PSC + 0xcc */ + u32 rximr; /* PSC + 0xd0 */ + u32 rxcnt; /* PSC + 0xd4 */ + u32 rxptr; /* PSC + 0xd8 */ + u32 rxsz; /* PSC + 0xdc */ + u32 reserved3[7]; + union { + u8 rxdata_8; + u16 rxdata_16; + u32 rxdata_32; + } rxdata; /* PSC + 0xfc */ +#define rxdata_8 rxdata.rxdata_8 +#define rxdata_16 rxdata.rxdata_16 +#define rxdata_32 rxdata.rxdata_32 +}; + +#endif /* __ASM_MPC52xx_PSC_H__ */ diff --git a/arch/powerpc/include/asm/mpc6xx.h b/arch/powerpc/include/asm/mpc6xx.h new file mode 100644 index 000000000000..effc2291beb2 --- /dev/null +++ b/arch/powerpc/include/asm/mpc6xx.h @@ -0,0 +1,6 @@ +#ifndef __ASM_POWERPC_MPC6xx_H +#define __ASM_POWERPC_MPC6xx_H + +void mpc6xx_enter_standby(void); + +#endif diff --git a/arch/powerpc/include/asm/mpc8260.h b/arch/powerpc/include/asm/mpc8260.h new file mode 100644 index 000000000000..03317e1e6185 --- /dev/null +++ b/arch/powerpc/include/asm/mpc8260.h @@ -0,0 +1,25 @@ +/* + * Since there are many different boards and no standard configuration, + * we have a unique include file for each. Rather than change every + * file that has to include MPC8260 configuration, they all include + * this one and the configuration switching is done here. + */ +#ifdef __KERNEL__ +#ifndef __ASM_POWERPC_MPC8260_H__ +#define __ASM_POWERPC_MPC8260_H__ + +#define MPC82XX_BCR_PLDP 0x00800000 /* Pipeline Maximum Depth */ + +#ifdef CONFIG_8260 + +#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS) +#include +#endif + +#ifdef CONFIG_PCI_8260 +#include +#endif + +#endif /* CONFIG_8260 */ +#endif /* !__ASM_POWERPC_MPC8260_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/mpc86xx.h b/arch/powerpc/include/asm/mpc86xx.h new file mode 100644 index 000000000000..15f650f987e7 --- /dev/null +++ b/arch/powerpc/include/asm/mpc86xx.h @@ -0,0 +1,33 @@ +/* + * MPC86xx definitions + * + * Author: Jeff Brown + * + * Copyright 2004 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_POWERPC_MPC86xx_H__ +#define __ASM_POWERPC_MPC86xx_H__ + +#include + +#ifdef CONFIG_PPC_86xx + +#define CPU0_BOOT_RELEASE 0x01000000 +#define CPU1_BOOT_RELEASE 0x02000000 +#define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE) +#define MCM_PORT_CONFIG_OFFSET 0x1010 + +/* Offset from CCSRBAR */ +#define MPC86xx_MCM_OFFSET (0x00000) +#define MPC86xx_MCM_SIZE (0x02000) + +#endif /* CONFIG_PPC_86xx */ +#endif /* __ASM_POWERPC_MPC86xx_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/mpc8xx.h b/arch/powerpc/include/asm/mpc8xx.h new file mode 100644 index 000000000000..98f3c4f17328 --- /dev/null +++ b/arch/powerpc/include/asm/mpc8xx.h @@ -0,0 +1,12 @@ +/* This is the single file included by all MPC8xx build options. + * Since there are many different boards and no standard configuration, + * we have a unique include file for each. Rather than change every + * file that has to include MPC8xx configuration, they all include + * this one and the configuration switching is done here. + */ +#ifndef __CONFIG_8xx_DEFS +#define __CONFIG_8xx_DEFS + +extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops; + +#endif /* __CONFIG_8xx_DEFS */ diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h new file mode 100644 index 000000000000..fe566a348a86 --- /dev/null +++ b/arch/powerpc/include/asm/mpic.h @@ -0,0 +1,481 @@ +#ifndef _ASM_POWERPC_MPIC_H +#define _ASM_POWERPC_MPIC_H +#ifdef __KERNEL__ + +#include +#include +#include + +/* + * Global registers + */ + +#define MPIC_GREG_BASE 0x01000 + +#define MPIC_GREG_FEATURE_0 0x00000 +#define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000 +#define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16 +#define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00 +#define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8 +#define MPIC_GREG_FEATURE_VERSION_MASK 0xff +#define MPIC_GREG_FEATURE_1 0x00010 +#define MPIC_GREG_GLOBAL_CONF_0 0x00020 +#define MPIC_GREG_GCONF_RESET 0x80000000 +#define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 +#define MPIC_GREG_GCONF_NO_BIAS 0x10000000 +#define MPIC_GREG_GCONF_BASE_MASK 0x000fffff +#define MPIC_GREG_GCONF_MCK 0x08000000 +#define MPIC_GREG_GLOBAL_CONF_1 0x00030 +#define MPIC_GREG_GLOBAL_CONF_1_SIE 0x08000000 +#define MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK 0x70000000 +#define MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(r) \ + (((r) << 28) & MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK) +#define MPIC_GREG_VENDOR_0 0x00040 +#define MPIC_GREG_VENDOR_1 0x00050 +#define MPIC_GREG_VENDOR_2 0x00060 +#define MPIC_GREG_VENDOR_3 0x00070 +#define MPIC_GREG_VENDOR_ID 0x00080 +#define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000 +#define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16 +#define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00 +#define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8 +#define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff +#define MPIC_GREG_PROCESSOR_INIT 0x00090 +#define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0 +#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0 +#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0 +#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0 +#define MPIC_GREG_IPI_STRIDE 0x10 +#define MPIC_GREG_SPURIOUS 0x000e0 +#define MPIC_GREG_TIMER_FREQ 0x000f0 + +/* + * + * Timer registers + */ +#define MPIC_TIMER_BASE 0x01100 +#define MPIC_TIMER_STRIDE 0x40 + +#define MPIC_TIMER_CURRENT_CNT 0x00000 +#define MPIC_TIMER_BASE_CNT 0x00010 +#define MPIC_TIMER_VECTOR_PRI 0x00020 +#define MPIC_TIMER_DESTINATION 0x00030 + +/* + * Per-Processor registers + */ + +#define MPIC_CPU_THISBASE 0x00000 +#define MPIC_CPU_BASE 0x20000 +#define MPIC_CPU_STRIDE 0x01000 + +#define MPIC_CPU_IPI_DISPATCH_0 0x00040 +#define MPIC_CPU_IPI_DISPATCH_1 0x00050 +#define MPIC_CPU_IPI_DISPATCH_2 0x00060 +#define MPIC_CPU_IPI_DISPATCH_3 0x00070 +#define MPIC_CPU_IPI_DISPATCH_STRIDE 0x00010 +#define MPIC_CPU_CURRENT_TASK_PRI 0x00080 +#define MPIC_CPU_TASKPRI_MASK 0x0000000f +#define MPIC_CPU_WHOAMI 0x00090 +#define MPIC_CPU_WHOAMI_MASK 0x0000001f +#define MPIC_CPU_INTACK 0x000a0 +#define MPIC_CPU_EOI 0x000b0 +#define MPIC_CPU_MCACK 0x000c0 + +/* + * Per-source registers + */ + +#define MPIC_IRQ_BASE 0x10000 +#define MPIC_IRQ_STRIDE 0x00020 +#define MPIC_IRQ_VECTOR_PRI 0x00000 +#define MPIC_VECPRI_MASK 0x80000000 +#define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */ +#define MPIC_VECPRI_PRIORITY_MASK 0x000f0000 +#define MPIC_VECPRI_PRIORITY_SHIFT 16 +#define MPIC_VECPRI_VECTOR_MASK 0x000007ff +#define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000 +#define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000 +#define MPIC_VECPRI_POLARITY_MASK 0x00800000 +#define MPIC_VECPRI_SENSE_LEVEL 0x00400000 +#define MPIC_VECPRI_SENSE_EDGE 0x00000000 +#define MPIC_VECPRI_SENSE_MASK 0x00400000 +#define MPIC_IRQ_DESTINATION 0x00010 + +#define MPIC_MAX_IRQ_SOURCES 2048 +#define MPIC_MAX_CPUS 32 +#define MPIC_MAX_ISU 32 + +/* + * Tsi108 implementation of MPIC has many differences from the original one + */ + +/* + * Global registers + */ + +#define TSI108_GREG_BASE 0x00000 +#define TSI108_GREG_FEATURE_0 0x00000 +#define TSI108_GREG_GLOBAL_CONF_0 0x00004 +#define TSI108_GREG_VENDOR_ID 0x0000c +#define TSI108_GREG_IPI_VECTOR_PRI_0 0x00204 /* Doorbell 0 */ +#define TSI108_GREG_IPI_STRIDE 0x0c +#define TSI108_GREG_SPURIOUS 0x00010 +#define TSI108_GREG_TIMER_FREQ 0x00014 + +/* + * Timer registers + */ +#define TSI108_TIMER_BASE 0x0030 +#define TSI108_TIMER_STRIDE 0x10 +#define TSI108_TIMER_CURRENT_CNT 0x00000 +#define TSI108_TIMER_BASE_CNT 0x00004 +#define TSI108_TIMER_VECTOR_PRI 0x00008 +#define TSI108_TIMER_DESTINATION 0x0000c + +/* + * Per-Processor registers + */ +#define TSI108_CPU_BASE 0x00300 +#define TSI108_CPU_STRIDE 0x00040 +#define TSI108_CPU_IPI_DISPATCH_0 0x00200 +#define TSI108_CPU_IPI_DISPATCH_STRIDE 0x00000 +#define TSI108_CPU_CURRENT_TASK_PRI 0x00000 +#define TSI108_CPU_WHOAMI 0xffffffff +#define TSI108_CPU_INTACK 0x00004 +#define TSI108_CPU_EOI 0x00008 +#define TSI108_CPU_MCACK 0x00004 /* Doesn't really exist here */ + +/* + * Per-source registers + */ +#define TSI108_IRQ_BASE 0x00100 +#define TSI108_IRQ_STRIDE 0x00008 +#define TSI108_IRQ_VECTOR_PRI 0x00000 +#define TSI108_VECPRI_VECTOR_MASK 0x000000ff +#define TSI108_VECPRI_POLARITY_POSITIVE 0x01000000 +#define TSI108_VECPRI_POLARITY_NEGATIVE 0x00000000 +#define TSI108_VECPRI_SENSE_LEVEL 0x02000000 +#define TSI108_VECPRI_SENSE_EDGE 0x00000000 +#define TSI108_VECPRI_POLARITY_MASK 0x01000000 +#define TSI108_VECPRI_SENSE_MASK 0x02000000 +#define TSI108_IRQ_DESTINATION 0x00004 + +/* weird mpic register indices and mask bits in the HW info array */ +enum { + MPIC_IDX_GREG_BASE = 0, + MPIC_IDX_GREG_FEATURE_0, + MPIC_IDX_GREG_GLOBAL_CONF_0, + MPIC_IDX_GREG_VENDOR_ID, + MPIC_IDX_GREG_IPI_VECTOR_PRI_0, + MPIC_IDX_GREG_IPI_STRIDE, + MPIC_IDX_GREG_SPURIOUS, + MPIC_IDX_GREG_TIMER_FREQ, + + MPIC_IDX_TIMER_BASE, + MPIC_IDX_TIMER_STRIDE, + MPIC_IDX_TIMER_CURRENT_CNT, + MPIC_IDX_TIMER_BASE_CNT, + MPIC_IDX_TIMER_VECTOR_PRI, + MPIC_IDX_TIMER_DESTINATION, + + MPIC_IDX_CPU_BASE, + MPIC_IDX_CPU_STRIDE, + MPIC_IDX_CPU_IPI_DISPATCH_0, + MPIC_IDX_CPU_IPI_DISPATCH_STRIDE, + MPIC_IDX_CPU_CURRENT_TASK_PRI, + MPIC_IDX_CPU_WHOAMI, + MPIC_IDX_CPU_INTACK, + MPIC_IDX_CPU_EOI, + MPIC_IDX_CPU_MCACK, + + MPIC_IDX_IRQ_BASE, + MPIC_IDX_IRQ_STRIDE, + MPIC_IDX_IRQ_VECTOR_PRI, + + MPIC_IDX_VECPRI_VECTOR_MASK, + MPIC_IDX_VECPRI_POLARITY_POSITIVE, + MPIC_IDX_VECPRI_POLARITY_NEGATIVE, + MPIC_IDX_VECPRI_SENSE_LEVEL, + MPIC_IDX_VECPRI_SENSE_EDGE, + MPIC_IDX_VECPRI_POLARITY_MASK, + MPIC_IDX_VECPRI_SENSE_MASK, + MPIC_IDX_IRQ_DESTINATION, + MPIC_IDX_END +}; + + +#ifdef CONFIG_MPIC_U3_HT_IRQS +/* Fixup table entry */ +struct mpic_irq_fixup +{ + u8 __iomem *base; + u8 __iomem *applebase; + u32 data; + unsigned int index; +}; +#endif /* CONFIG_MPIC_U3_HT_IRQS */ + + +enum mpic_reg_type { + mpic_access_mmio_le, + mpic_access_mmio_be, +#ifdef CONFIG_PPC_DCR + mpic_access_dcr +#endif +}; + +struct mpic_reg_bank { + u32 __iomem *base; +#ifdef CONFIG_PPC_DCR + dcr_host_t dhost; +#endif /* CONFIG_PPC_DCR */ +}; + +struct mpic_irq_save { + u32 vecprio, + dest; +#ifdef CONFIG_MPIC_U3_HT_IRQS + u32 fixup_data; +#endif +}; + +/* The instance data of a given MPIC */ +struct mpic +{ + /* The remapper for this MPIC */ + struct irq_host *irqhost; + + /* The "linux" controller struct */ + struct irq_chip hc_irq; +#ifdef CONFIG_MPIC_U3_HT_IRQS + struct irq_chip hc_ht_irq; +#endif +#ifdef CONFIG_SMP + struct irq_chip hc_ipi; +#endif + const char *name; + /* Flags */ + unsigned int flags; + /* How many irq sources in a given ISU */ + unsigned int isu_size; + unsigned int isu_shift; + unsigned int isu_mask; + unsigned int irq_count; + /* Number of sources */ + unsigned int num_sources; + /* Number of CPUs */ + unsigned int num_cpus; + /* default senses array */ + unsigned char *senses; + unsigned int senses_count; + + /* vector numbers used for internal sources (ipi/timers) */ + unsigned int ipi_vecs[4]; + unsigned int timer_vecs[4]; + + /* Spurious vector to program into unused sources */ + unsigned int spurious_vec; + +#ifdef CONFIG_MPIC_U3_HT_IRQS + /* The fixup table */ + struct mpic_irq_fixup *fixups; + spinlock_t fixup_lock; +#endif + + /* Register access method */ + enum mpic_reg_type reg_type; + + /* The various ioremap'ed bases */ + struct mpic_reg_bank gregs; + struct mpic_reg_bank tmregs; + struct mpic_reg_bank cpuregs[MPIC_MAX_CPUS]; + struct mpic_reg_bank isus[MPIC_MAX_ISU]; + + /* Protected sources */ + unsigned long *protected; + +#ifdef CONFIG_MPIC_WEIRD + /* Pointer to HW info array */ + u32 *hw_set; +#endif + +#ifdef CONFIG_PCI_MSI + spinlock_t bitmap_lock; + unsigned long *hwirq_bitmap; +#endif + +#ifdef CONFIG_MPIC_BROKEN_REGREAD + u32 isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES]; +#endif + + /* link */ + struct mpic *next; + + struct sys_device sysdev; + +#ifdef CONFIG_PM + struct mpic_irq_save *save_data; +#endif +}; + +/* + * MPIC flags (passed to mpic_alloc) + * + * The top 4 bits contain an MPIC bhw id that is used to index the + * register offsets and some masks when CONFIG_MPIC_WEIRD is set. + * Note setting any ID (leaving those bits to 0) means standard MPIC + */ + +/* This is the primary controller, only that one has IPIs and + * has afinity control. A non-primary MPIC always uses CPU0 + * registers only + */ +#define MPIC_PRIMARY 0x00000001 + +/* Set this for a big-endian MPIC */ +#define MPIC_BIG_ENDIAN 0x00000002 +/* Broken U3 MPIC */ +#define MPIC_U3_HT_IRQS 0x00000004 +/* Broken IPI registers (autodetected) */ +#define MPIC_BROKEN_IPI 0x00000008 +/* MPIC wants a reset */ +#define MPIC_WANTS_RESET 0x00000010 +/* Spurious vector requires EOI */ +#define MPIC_SPV_EOI 0x00000020 +/* No passthrough disable */ +#define MPIC_NO_PTHROU_DIS 0x00000040 +/* DCR based MPIC */ +#define MPIC_USES_DCR 0x00000080 +/* MPIC has 11-bit vector fields (or larger) */ +#define MPIC_LARGE_VECTORS 0x00000100 +/* Enable delivery of prio 15 interrupts as MCK instead of EE */ +#define MPIC_ENABLE_MCK 0x00000200 +/* Disable bias among target selection, spread interrupts evenly */ +#define MPIC_NO_BIAS 0x00000400 +/* Ignore NIRQS as reported by FRR */ +#define MPIC_BROKEN_FRR_NIRQS 0x00000800 + +/* MPIC HW modification ID */ +#define MPIC_REGSET_MASK 0xf0000000 +#define MPIC_REGSET(val) (((val) & 0xf ) << 28) +#define MPIC_GET_REGSET(flags) (((flags) >> 28) & 0xf) + +#define MPIC_REGSET_STANDARD MPIC_REGSET(0) /* Original MPIC */ +#define MPIC_REGSET_TSI108 MPIC_REGSET(1) /* Tsi108/109 PIC */ + +/* Allocate the controller structure and setup the linux irq descs + * for the range if interrupts passed in. No HW initialization is + * actually performed. + * + * @phys_addr: physial base address of the MPIC + * @flags: flags, see constants above + * @isu_size: number of interrupts in an ISU. Use 0 to use a + * standard ISU-less setup (aka powermac) + * @irq_offset: first irq number to assign to this mpic + * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0 + * to match the number of sources + * @ipi_offset: first irq number to assign to this mpic IPI sources, + * used only on primary mpic + * @senses: array of sense values + * @senses_num: number of entries in the array + * + * Note about the sense array. If none is passed, all interrupts are + * setup to be level negative unless MPIC_U3_HT_IRQS is set in which + * case they are edge positive (and the array is ignored anyway). + * The values in the array start at the first source of the MPIC, + * that is senses[0] correspond to linux irq "irq_offset". + */ +extern struct mpic *mpic_alloc(struct device_node *node, + phys_addr_t phys_addr, + unsigned int flags, + unsigned int isu_size, + unsigned int irq_count, + const char *name); + +/* Assign ISUs, to call before mpic_init() + * + * @mpic: controller structure as returned by mpic_alloc() + * @isu_num: ISU number + * @phys_addr: physical address of the ISU + */ +extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, + phys_addr_t phys_addr); + +/* Set default sense codes + * + * @mpic: controller + * @senses: array of sense codes + * @count: size of above array + * + * Optionally provide an array (indexed on hardware interrupt numbers + * for this MPIC) of default sense codes for the chip. Those are linux + * sense codes IRQ_TYPE_* + * + * The driver gets ownership of the pointer, don't dispose of it or + * anything like that. __init only. + */ +extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count); + + +/* Initialize the controller. After this has been called, none of the above + * should be called again for this mpic + */ +extern void mpic_init(struct mpic *mpic); + +/* + * All of the following functions must only be used after the + * ISUs have been assigned and the controller fully initialized + * with mpic_init() + */ + + +/* Change the priority of an interrupt. Default is 8 for irqs and + * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the + * IPI number is then the offset'ed (linux irq number mapped to the IPI) + */ +extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri); + +/* Setup a non-boot CPU */ +extern void mpic_setup_this_cpu(void); + +/* Clean up for kexec (or cpu offline or ...) */ +extern void mpic_teardown_this_cpu(int secondary); + +/* Get the current cpu priority for this cpu (0..15) */ +extern int mpic_cpu_get_priority(void); + +/* Set the current cpu priority for this cpu */ +extern void mpic_cpu_set_priority(int prio); + +/* Request IPIs on primary mpic */ +extern void mpic_request_ipis(void); + +/* Send an IPI (non offseted number 0..3) */ +extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask); + +/* Send a message (IPI) to a given target (cpu number or MSG_*) */ +void smp_mpic_message_pass(int target, int msg); + +/* Unmask a specific virq */ +extern void mpic_unmask_irq(unsigned int irq); +/* Mask a specific virq */ +extern void mpic_mask_irq(unsigned int irq); +/* EOI a specific virq */ +extern void mpic_end_irq(unsigned int irq); + +/* Fetch interrupt from a given mpic */ +extern unsigned int mpic_get_one_irq(struct mpic *mpic); +/* This one gets from the primary mpic */ +extern unsigned int mpic_get_irq(void); +/* Fetch Machine Check interrupt from primary mpic */ +extern unsigned int mpic_get_mcirq(void); + +/* Set the EPIC clock ratio */ +void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio); + +/* Enable/Disable EPIC serial interrupt mode */ +void mpic_set_serial_int(struct mpic *mpic, int enable); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MPIC_H */ diff --git a/arch/powerpc/include/asm/msgbuf.h b/arch/powerpc/include/asm/msgbuf.h new file mode 100644 index 000000000000..dd76743c7537 --- /dev/null +++ b/arch/powerpc/include/asm/msgbuf.h @@ -0,0 +1,33 @@ +#ifndef _ASM_POWERPC_MSGBUF_H +#define _ASM_POWERPC_MSGBUF_H + +/* + * The msqid64_ds structure for the PowerPC architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; +#ifndef __powerpc64__ + unsigned int __unused1; +#endif + __kernel_time_t msg_stime; /* last msgsnd time */ +#ifndef __powerpc64__ + unsigned int __unused2; +#endif + __kernel_time_t msg_rtime; /* last msgrcv time */ +#ifndef __powerpc64__ + unsigned int __unused3; +#endif + __kernel_time_t msg_ctime; /* last change time */ + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _ASM_POWERPC_MSGBUF_H */ diff --git a/arch/powerpc/include/asm/mutex.h b/arch/powerpc/include/asm/mutex.h new file mode 100644 index 000000000000..458c1f7fbc18 --- /dev/null +++ b/arch/powerpc/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include diff --git a/arch/powerpc/include/asm/nvram.h b/arch/powerpc/include/asm/nvram.h new file mode 100644 index 000000000000..efde5ac82f7b --- /dev/null +++ b/arch/powerpc/include/asm/nvram.h @@ -0,0 +1,139 @@ +/* + * NVRAM definitions and access functions. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_POWERPC_NVRAM_H +#define _ASM_POWERPC_NVRAM_H + +#include + +#define NVRW_CNT 0x20 +#define NVRAM_HEADER_LEN 16 /* sizeof(struct nvram_header) */ +#define NVRAM_BLOCK_LEN 16 +#define NVRAM_MAX_REQ (2080/NVRAM_BLOCK_LEN) +#define NVRAM_MIN_REQ (1056/NVRAM_BLOCK_LEN) + +#define NVRAM_AS0 0x74 +#define NVRAM_AS1 0x75 +#define NVRAM_DATA 0x77 + + +/* RTC Offsets */ + +#define MOTO_RTC_SECONDS 0x1FF9 +#define MOTO_RTC_MINUTES 0x1FFA +#define MOTO_RTC_HOURS 0x1FFB +#define MOTO_RTC_DAY_OF_WEEK 0x1FFC +#define MOTO_RTC_DAY_OF_MONTH 0x1FFD +#define MOTO_RTC_MONTH 0x1FFE +#define MOTO_RTC_YEAR 0x1FFF +#define MOTO_RTC_CONTROLA 0x1FF8 +#define MOTO_RTC_CONTROLB 0x1FF9 + +#define NVRAM_SIG_SP 0x02 /* support processor */ +#define NVRAM_SIG_OF 0x50 /* open firmware config */ +#define NVRAM_SIG_FW 0x51 /* general firmware */ +#define NVRAM_SIG_HW 0x52 /* hardware (VPD) */ +#define NVRAM_SIG_FLIP 0x5a /* Apple flip/flop header */ +#define NVRAM_SIG_APPL 0x5f /* Apple "system" (???) */ +#define NVRAM_SIG_SYS 0x70 /* system env vars */ +#define NVRAM_SIG_CFG 0x71 /* config data */ +#define NVRAM_SIG_ELOG 0x72 /* error log */ +#define NVRAM_SIG_VEND 0x7e /* vendor defined */ +#define NVRAM_SIG_FREE 0x7f /* Free space */ +#define NVRAM_SIG_OS 0xa0 /* OS defined */ +#define NVRAM_SIG_PANIC 0xa1 /* Apple OSX "panic" */ + +/* If change this size, then change the size of NVNAME_LEN */ +struct nvram_header { + unsigned char signature; + unsigned char checksum; + unsigned short length; + char name[12]; +}; + +#ifdef __KERNEL__ + +#include + +struct nvram_partition { + struct list_head partition; + struct nvram_header header; + unsigned int index; +}; + + +extern int nvram_write_error_log(char * buff, int length, + unsigned int err_type, unsigned int err_seq); +extern int nvram_read_error_log(char * buff, int length, + unsigned int * err_type, unsigned int *err_seq); +extern int nvram_clear_error_log(void); +extern struct nvram_partition *nvram_find_partition(int sig, const char *name); + +extern int pSeries_nvram_init(void); + +#ifdef CONFIG_MMIO_NVRAM +extern int mmio_nvram_init(void); +#else +static inline int mmio_nvram_init(void) +{ + return -ENODEV; +} +#endif + +#endif /* __KERNEL__ */ + +/* PowerMac specific nvram stuffs */ + +enum { + pmac_nvram_OF, /* Open Firmware partition */ + pmac_nvram_XPRAM, /* MacOS XPRAM partition */ + pmac_nvram_NR /* MacOS Name Registry partition */ +}; + +#ifdef __KERNEL__ +/* Return partition offset in nvram */ +extern int pmac_get_partition(int partition); + +/* Direct access to XPRAM on PowerMacs */ +extern u8 pmac_xpram_read(int xpaddr); +extern void pmac_xpram_write(int xpaddr, u8 data); + +/* Synchronize NVRAM */ +extern void nvram_sync(void); + +/* Normal access to NVRAM */ +extern unsigned char nvram_read_byte(int i); +extern void nvram_write_byte(unsigned char c, int i); +#endif + +/* Some offsets in XPRAM */ +#define PMAC_XPRAM_MACHINE_LOC 0xe4 +#define PMAC_XPRAM_SOUND_VOLUME 0x08 + +/* Machine location structure in PowerMac XPRAM */ +struct pmac_machine_location { + unsigned int latitude; /* 2+30 bit Fractional number */ + unsigned int longitude; /* 2+30 bit Fractional number */ + unsigned int delta; /* mix of GMT delta and DLS */ +}; + +/* + * /dev/nvram ioctls + * + * Note that PMAC_NVRAM_GET_OFFSET is still supported, but is + * definitely obsolete. Do not use it if you can avoid it + */ + +#define OBSOLETE_PMAC_NVRAM_GET_OFFSET \ + _IOWR('p', 0x40, int) + +#define IOC_NVRAM_GET_OFFSET _IOWR('p', 0x42, int) /* Get NVRAM partition offset */ +#define IOC_NVRAM_SYNC _IO('p', 0x43) /* Sync NVRAM image */ + +#endif /* _ASM_POWERPC_NVRAM_H */ diff --git a/arch/powerpc/include/asm/of_device.h b/arch/powerpc/include/asm/of_device.h new file mode 100644 index 000000000000..3c123990ca2e --- /dev/null +++ b/arch/powerpc/include/asm/of_device.h @@ -0,0 +1,31 @@ +#ifndef _ASM_POWERPC_OF_DEVICE_H +#define _ASM_POWERPC_OF_DEVICE_H +#ifdef __KERNEL__ + +#include +#include + +/* + * The of_device is a kind of "base class" that is a superset of + * struct device for use by devices attached to an OF node and + * probed using OF properties. + */ +struct of_device +{ + struct device_node *node; /* to be obsoleted */ + u64 dma_mask; /* DMA mask */ + struct device dev; /* Generic device interface */ +}; + +extern struct of_device *of_device_alloc(struct device_node *np, + const char *bus_id, + struct device *parent); + +extern int of_device_uevent(struct device *dev, + struct kobj_uevent_env *env); + +/* This is just here during the transition */ +#include + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_OF_DEVICE_H */ diff --git a/arch/powerpc/include/asm/of_platform.h b/arch/powerpc/include/asm/of_platform.h new file mode 100644 index 000000000000..18659ef72139 --- /dev/null +++ b/arch/powerpc/include/asm/of_platform.h @@ -0,0 +1,42 @@ +#ifndef _ASM_POWERPC_OF_PLATFORM_H +#define _ASM_POWERPC_OF_PLATFORM_H +/* + * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +/* This is just here during the transition */ +#include + +/* Platform drivers register/unregister */ +static inline int of_register_platform_driver(struct of_platform_driver *drv) +{ + return of_register_driver(drv, &of_platform_bus_type); +} +static inline void of_unregister_platform_driver(struct of_platform_driver *drv) +{ + of_unregister_driver(drv); +} + +/* Platform devices and busses creation */ +extern struct of_device *of_platform_device_create(struct device_node *np, + const char *bus_id, + struct device *parent); +/* pseudo "matches" value to not do deep probe */ +#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1) + +extern int of_platform_bus_probe(struct device_node *root, + const struct of_device_id *matches, + struct device *parent); + +extern struct of_device *of_find_device_by_phandle(phandle ph); + +extern void of_instantiate_rtc(void); + +#endif /* _ASM_POWERPC_OF_PLATFORM_H */ diff --git a/arch/powerpc/include/asm/ohare.h b/arch/powerpc/include/asm/ohare.h new file mode 100644 index 000000000000..0d030f9dea24 --- /dev/null +++ b/arch/powerpc/include/asm/ohare.h @@ -0,0 +1,54 @@ +#ifndef _ASM_POWERPC_OHARE_H +#define _ASM_POWERPC_OHARE_H +#ifdef __KERNEL__ +/* + * ohare.h: definitions for using the "O'Hare" I/O controller chip. + * + * Copyright (C) 1997 Paul Mackerras. + * + * BenH: Changed to match those of heathrow (but not all of them). Please + * check if I didn't break anything (especially the media bay). + */ + +/* offset from ohare base for feature control register */ +#define OHARE_MBCR 0x34 +#define OHARE_FCR 0x38 + +/* + * Bits in feature control register. + * These were mostly derived by experiment on a powerbook 3400 + * and may differ for other machines. + */ +#define OH_SCC_RESET 1 +#define OH_BAY_POWER_N 2 /* a guess */ +#define OH_BAY_PCI_ENABLE 4 /* a guess */ +#define OH_BAY_IDE_ENABLE 8 +#define OH_BAY_FLOPPY_ENABLE 0x10 +#define OH_IDE0_ENABLE 0x20 +#define OH_IDE0_RESET_N 0x40 /* a guess */ +#define OH_BAY_DEV_MASK 0x1c +#define OH_BAY_RESET_N 0x80 +#define OH_IOBUS_ENABLE 0x100 /* IOBUS seems to be IDE */ +#define OH_SCC_ENABLE 0x200 +#define OH_MESH_ENABLE 0x400 +#define OH_FLOPPY_ENABLE 0x800 +#define OH_SCCA_IO 0x4000 +#define OH_SCCB_IO 0x8000 +#define OH_VIA_ENABLE 0x10000 /* Is apparently wrong, to be verified */ +#define OH_IDE1_RESET_N 0x800000 + +/* + * Bits to set in the feature control register on PowerBooks. + */ +#define PBOOK_FEATURES (OH_IDE_ENABLE | OH_SCC_ENABLE | \ + OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO) + +/* + * A magic value to put into the feature control register of the + * "ohare" I/O controller on Starmaxes to enable the IDE CD interface. + * Contributed by Harry Eaton. + */ +#define STARMAX_FEATURES 0xbeff7a + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_OHARE_H */ diff --git a/arch/powerpc/include/asm/oprofile_impl.h b/arch/powerpc/include/asm/oprofile_impl.h new file mode 100644 index 000000000000..95035c602ba6 --- /dev/null +++ b/arch/powerpc/include/asm/oprofile_impl.h @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2004 Anton Blanchard , IBM + * + * Based on alpha version. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_POWERPC_OPROFILE_IMPL_H +#define _ASM_POWERPC_OPROFILE_IMPL_H +#ifdef __KERNEL__ + +#define OP_MAX_COUNTER 8 + +/* Per-counter configuration as set via oprofilefs. */ +struct op_counter_config { + unsigned long enabled; + unsigned long event; + unsigned long count; + /* Classic doesn't support per-counter user/kernel selection */ + unsigned long kernel; + unsigned long user; + unsigned long unit_mask; +}; + +/* System-wide configuration as set via oprofilefs. */ +struct op_system_config { +#ifdef CONFIG_PPC64 + unsigned long mmcr0; + unsigned long mmcr1; + unsigned long mmcra; +#endif + unsigned long enable_kernel; + unsigned long enable_user; +}; + +/* Per-arch configuration */ +struct op_powerpc_model { + int (*reg_setup) (struct op_counter_config *, + struct op_system_config *, + int num_counters); + int (*cpu_setup) (struct op_counter_config *); + int (*start) (struct op_counter_config *); + int (*global_start) (struct op_counter_config *); + void (*stop) (void); + void (*global_stop) (void); + int (*sync_start)(void); + int (*sync_stop)(void); + void (*handle_interrupt) (struct pt_regs *, + struct op_counter_config *); + int num_counters; +}; + +extern struct op_powerpc_model op_model_fsl_emb; +extern struct op_powerpc_model op_model_rs64; +extern struct op_powerpc_model op_model_power4; +extern struct op_powerpc_model op_model_7450; +extern struct op_powerpc_model op_model_cell; +extern struct op_powerpc_model op_model_pa6t; + + +/* All the classic PPC parts use these */ +static inline unsigned int classic_ctr_read(unsigned int i) +{ + switch(i) { + case 0: + return mfspr(SPRN_PMC1); + case 1: + return mfspr(SPRN_PMC2); + case 2: + return mfspr(SPRN_PMC3); + case 3: + return mfspr(SPRN_PMC4); + case 4: + return mfspr(SPRN_PMC5); + case 5: + return mfspr(SPRN_PMC6); + +/* No PPC32 chip has more than 6 so far */ +#ifdef CONFIG_PPC64 + case 6: + return mfspr(SPRN_PMC7); + case 7: + return mfspr(SPRN_PMC8); +#endif + default: + return 0; + } +} + +static inline void classic_ctr_write(unsigned int i, unsigned int val) +{ + switch(i) { + case 0: + mtspr(SPRN_PMC1, val); + break; + case 1: + mtspr(SPRN_PMC2, val); + break; + case 2: + mtspr(SPRN_PMC3, val); + break; + case 3: + mtspr(SPRN_PMC4, val); + break; + case 4: + mtspr(SPRN_PMC5, val); + break; + case 5: + mtspr(SPRN_PMC6, val); + break; + +/* No PPC32 chip has more than 6, yet */ +#ifdef CONFIG_PPC64 + case 6: + mtspr(SPRN_PMC7, val); + break; + case 7: + mtspr(SPRN_PMC8, val); + break; +#endif + default: + break; + } +} + + +extern void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */ diff --git a/arch/powerpc/include/asm/pSeries_reconfig.h b/arch/powerpc/include/asm/pSeries_reconfig.h new file mode 100644 index 000000000000..e482e5352e69 --- /dev/null +++ b/arch/powerpc/include/asm/pSeries_reconfig.h @@ -0,0 +1,29 @@ +#ifndef _PPC64_PSERIES_RECONFIG_H +#define _PPC64_PSERIES_RECONFIG_H +#ifdef __KERNEL__ + +#include + +/* + * Use this API if your code needs to know about OF device nodes being + * added or removed on pSeries systems. + */ + +#define PSERIES_RECONFIG_ADD 0x0001 +#define PSERIES_RECONFIG_REMOVE 0x0002 +#define PSERIES_DRCONF_MEM_ADD 0x0003 +#define PSERIES_DRCONF_MEM_REMOVE 0x0004 + +#ifdef CONFIG_PPC_PSERIES +extern int pSeries_reconfig_notifier_register(struct notifier_block *); +extern void pSeries_reconfig_notifier_unregister(struct notifier_block *); +#else /* !CONFIG_PPC_PSERIES */ +static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb) +{ + return 0; +} +static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { } +#endif /* CONFIG_PPC_PSERIES */ + +#endif /* __KERNEL__ */ +#endif /* _PPC64_PSERIES_RECONFIG_H */ diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h new file mode 100644 index 000000000000..6493a395508b --- /dev/null +++ b/arch/powerpc/include/asm/paca.h @@ -0,0 +1,112 @@ +/* + * This control block defines the PACA which defines the processor + * specific data for each logical processor on the system. + * There are some pointers defined that are utilized by PLIC. + * + * C 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_POWERPC_PACA_H +#define _ASM_POWERPC_PACA_H +#ifdef __KERNEL__ + +#include +#include +#include + +register struct paca_struct *local_paca asm("r13"); + +#if defined(CONFIG_DEBUG_PREEMPT) && defined(CONFIG_SMP) +extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */ +/* + * Add standard checks that preemption cannot occur when using get_paca(): + * otherwise the paca_struct it points to may be the wrong one just after. + */ +#define get_paca() ((void) debug_smp_processor_id(), local_paca) +#else +#define get_paca() local_paca +#endif + +#define get_lppaca() (get_paca()->lppaca_ptr) +#define get_slb_shadow() (get_paca()->slb_shadow_ptr) + +struct task_struct; + +/* + * Defines the layout of the paca. + * + * This structure is not directly accessed by firmware or the service + * processor. + */ +struct paca_struct { + /* + * Because hw_cpu_id, unlike other paca fields, is accessed + * routinely from other CPUs (from the IRQ code), we stick to + * read-only (after boot) fields in the first cacheline to + * avoid cacheline bouncing. + */ + + struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */ + + /* + * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c + * load lock_token and paca_index with a single lwz + * instruction. They must travel together and be properly + * aligned. + */ + u16 lock_token; /* Constant 0x8000, used in locks */ + u16 paca_index; /* Logical processor number */ + + u64 kernel_toc; /* Kernel TOC address */ + u64 stab_real; /* Absolute address of segment table */ + u64 stab_addr; /* Virtual address of segment table */ + void *emergency_sp; /* pointer to emergency stack */ + u64 data_offset; /* per cpu data offset */ + s16 hw_cpu_id; /* Physical processor number */ + u8 cpu_start; /* At startup, processor spins until */ + /* this becomes non-zero. */ + struct slb_shadow *slb_shadow_ptr; + + /* + * Now, starting in cacheline 2, the exception save areas + */ + /* used for most interrupts/exceptions */ + u64 exgen[10] __attribute__((aligned(0x80))); + u64 exmc[10]; /* used for machine checks */ + u64 exslb[10]; /* used for SLB/segment table misses + * on the linear mapping */ + + mm_context_t context; + u16 vmalloc_sllp; + u16 slb_cache_ptr; + u16 slb_cache[SLB_CACHE_ENTRIES]; + + /* + * then miscellaneous read-write fields + */ + struct task_struct *__current; /* Pointer to current */ + u64 kstack; /* Saved Kernel stack addr */ + u64 stab_rr; /* stab/slb round-robin counter */ + u64 saved_r1; /* r1 save for RTAS calls */ + u64 saved_msr; /* MSR saved here by enter_rtas */ + u16 trap_save; /* Used when bad stack is encountered */ + u8 soft_enabled; /* irq soft-enable flag */ + u8 hard_enabled; /* set if irqs are enabled in MSR */ + u8 io_sync; /* writel() needs spin_unlock sync */ + + /* Stuff for accurate time accounting */ + u64 user_time; /* accumulated usermode TB ticks */ + u64 system_time; /* accumulated system TB ticks */ + u64 startpurr; /* PURR/TB value snapshot */ + u64 startspurr; /* SPURR value snapshot */ +}; + +extern struct paca_struct paca[]; +extern void initialise_pacas(void); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PACA_H */ diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h new file mode 100644 index 000000000000..e088545cb3f5 --- /dev/null +++ b/arch/powerpc/include/asm/page.h @@ -0,0 +1,225 @@ +#ifndef _ASM_POWERPC_PAGE_H +#define _ASM_POWERPC_PAGE_H + +/* + * Copyright (C) 2001,2005 IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include + +/* + * On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software + * page size. When using 64K pages however, whether we are really supporting + * 64K pages in HW or not is irrelevant to those definitions. + */ +#ifdef CONFIG_PPC_64K_PAGES +#define PAGE_SHIFT 16 +#else +#define PAGE_SHIFT 12 +#endif + +#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) + +/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */ +#define __HAVE_ARCH_GATE_AREA 1 + +/* + * Subtle: (1 << PAGE_SHIFT) is an int, not an unsigned long. So if we + * assign PAGE_MASK to a larger type it gets extended the way we want + * (i.e. with 1s in the high bits) + */ +#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) + +/* + * KERNELBASE is the virtual address of the start of the kernel, it's often + * the same as PAGE_OFFSET, but _might not be_. + * + * The kdump dump kernel is one example where KERNELBASE != PAGE_OFFSET. + * + * PAGE_OFFSET is the virtual address of the start of lowmem. + * + * PHYSICAL_START is the physical address of the start of the kernel. + * + * MEMORY_START is the physical address of the start of lowmem. + * + * KERNELBASE, PAGE_OFFSET, and PHYSICAL_START are all configurable on + * ppc32 and based on how they are set we determine MEMORY_START. + * + * For the linear mapping the following equation should be true: + * KERNELBASE - PAGE_OFFSET = PHYSICAL_START - MEMORY_START + * + * Also, KERNELBASE >= PAGE_OFFSET and PHYSICAL_START >= MEMORY_START + * + * There are two was to determine a physical address from a virtual one: + * va = pa + PAGE_OFFSET - MEMORY_START + * va = pa + KERNELBASE - PHYSICAL_START + * + * If you want to know something's offset from the start of the kernel you + * should subtract KERNELBASE. + * + * If you want to test if something's a kernel address, use is_kernel_addr(). + */ + +#define KERNELBASE ASM_CONST(CONFIG_KERNEL_START) +#define PAGE_OFFSET ASM_CONST(CONFIG_PAGE_OFFSET) +#define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START)) + +#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_FLATMEM) +#ifndef __ASSEMBLY__ +extern phys_addr_t memstart_addr; +extern phys_addr_t kernstart_addr; +#endif +#define PHYSICAL_START kernstart_addr +#define MEMORY_START memstart_addr +#else +#define PHYSICAL_START ASM_CONST(CONFIG_PHYSICAL_START) +#define MEMORY_START (PHYSICAL_START + PAGE_OFFSET - KERNELBASE) +#endif + +#ifdef CONFIG_FLATMEM +#define ARCH_PFN_OFFSET (MEMORY_START >> PAGE_SHIFT) +#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr)) +#endif + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) + +#define __va(x) ((void *)((unsigned long)(x) - PHYSICAL_START + KERNELBASE)) +#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE) + +/* + * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI, + * and needs to be executable. This means the whole heap ends + * up being executable. + */ +#define VM_DATA_DEFAULT_FLAGS32 (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#define VM_DATA_DEFAULT_FLAGS64 (VM_READ | VM_WRITE | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#ifdef __powerpc64__ +#include +#else +#include +#endif + +/* align addr on a size boundary - adjust address up/down if needed */ +#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) +#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1))) + +/* align addr on a size boundary - adjust address up if needed */ +#define _ALIGN(addr,size) _ALIGN_UP(addr,size) + +/* + * Don't compare things with KERNELBASE or PAGE_OFFSET to test for + * "kernelness", use is_kernel_addr() - it should do what you want. + */ +#define is_kernel_addr(x) ((x) >= PAGE_OFFSET) + +#ifndef __ASSEMBLY__ + +#undef STRICT_MM_TYPECHECKS + +#ifdef STRICT_MM_TYPECHECKS +/* These are used to make use of C type-checking. */ + +/* PTE level */ +typedef struct { pte_basic_t pte; } pte_t; +#define pte_val(x) ((x).pte) +#define __pte(x) ((pte_t) { (x) }) + +/* 64k pages additionally define a bigger "real PTE" type that gathers + * the "second half" part of the PTE for pseudo 64k pages + */ +#ifdef CONFIG_PPC_64K_PAGES +typedef struct { pte_t pte; unsigned long hidx; } real_pte_t; +#else +typedef struct { pte_t pte; } real_pte_t; +#endif + +/* PMD level */ +#ifdef CONFIG_PPC64 +typedef struct { unsigned long pmd; } pmd_t; +#define pmd_val(x) ((x).pmd) +#define __pmd(x) ((pmd_t) { (x) }) + +/* PUD level exusts only on 4k pages */ +#ifndef CONFIG_PPC_64K_PAGES +typedef struct { unsigned long pud; } pud_t; +#define pud_val(x) ((x).pud) +#define __pud(x) ((pud_t) { (x) }) +#endif /* !CONFIG_PPC_64K_PAGES */ +#endif /* CONFIG_PPC64 */ + +/* PGD level */ +typedef struct { unsigned long pgd; } pgd_t; +#define pgd_val(x) ((x).pgd) +#define __pgd(x) ((pgd_t) { (x) }) + +/* Page protection bits */ +typedef struct { unsigned long pgprot; } pgprot_t; +#define pgprot_val(x) ((x).pgprot) +#define __pgprot(x) ((pgprot_t) { (x) }) + +#else + +/* + * .. while these make it easier on the compiler + */ + +typedef pte_basic_t pte_t; +#define pte_val(x) (x) +#define __pte(x) (x) + +#ifdef CONFIG_PPC_64K_PAGES +typedef struct { pte_t pte; unsigned long hidx; } real_pte_t; +#else +typedef unsigned long real_pte_t; +#endif + + +#ifdef CONFIG_PPC64 +typedef unsigned long pmd_t; +#define pmd_val(x) (x) +#define __pmd(x) (x) + +#ifndef CONFIG_PPC_64K_PAGES +typedef unsigned long pud_t; +#define pud_val(x) (x) +#define __pud(x) (x) +#endif /* !CONFIG_PPC_64K_PAGES */ +#endif /* CONFIG_PPC64 */ + +typedef unsigned long pgd_t; +#define pgd_val(x) (x) +#define pgprot_val(x) (x) + +typedef unsigned long pgprot_t; +#define __pgd(x) (x) +#define __pgprot(x) (x) + +#endif + +struct page; +extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg); +extern void copy_user_page(void *to, void *from, unsigned long vaddr, + struct page *p); +extern int page_is_ram(unsigned long pfn); + +struct vm_area_struct; + +typedef struct page *pgtable_t; + +#include +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_PAGE_H */ diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h new file mode 100644 index 000000000000..ebfae530a379 --- /dev/null +++ b/arch/powerpc/include/asm/page_32.h @@ -0,0 +1,38 @@ +#ifndef _ASM_POWERPC_PAGE_32_H +#define _ASM_POWERPC_PAGE_32_H + +#if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0) +#if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0 +#error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN" +#endif +#endif + +#define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32 + +#ifdef CONFIG_NOT_COHERENT_CACHE +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES +#endif + +#ifndef __ASSEMBLY__ +/* + * The basic type of a PTE - 64 bits for those CPUs with > 32 bit + * physical addressing. For now this just the IBM PPC440. + */ +#ifdef CONFIG_PTE_64BIT +typedef unsigned long long pte_basic_t; +#define PTE_SHIFT (PAGE_SHIFT - 3) /* 512 ptes per page */ +#else +typedef unsigned long pte_basic_t; +#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */ +#endif + +struct page; +extern void clear_pages(void *page, int order); +static inline void clear_page(void *page) { clear_pages(page, 0); } +extern void copy_page(void *to, void *from); + +#include + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_PAGE_32_H */ diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h new file mode 100644 index 000000000000..043bfdfe4f73 --- /dev/null +++ b/arch/powerpc/include/asm/page_64.h @@ -0,0 +1,185 @@ +#ifndef _ASM_POWERPC_PAGE_64_H +#define _ASM_POWERPC_PAGE_64_H + +/* + * Copyright (C) 2001 PPC64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* + * We always define HW_PAGE_SHIFT to 12 as use of 64K pages remains Linux + * specific, every notion of page number shared with the firmware, TCEs, + * iommu, etc... still uses a page size of 4K. + */ +#define HW_PAGE_SHIFT 12 +#define HW_PAGE_SIZE (ASM_CONST(1) << HW_PAGE_SHIFT) +#define HW_PAGE_MASK (~(HW_PAGE_SIZE-1)) + +/* + * PAGE_FACTOR is the number of bits factor between PAGE_SHIFT and + * HW_PAGE_SHIFT, that is 4K pages. + */ +#define PAGE_FACTOR (PAGE_SHIFT - HW_PAGE_SHIFT) + +/* Segment size; normal 256M segments */ +#define SID_SHIFT 28 +#define SID_MASK ASM_CONST(0xfffffffff) +#define ESID_MASK 0xfffffffff0000000UL +#define GET_ESID(x) (((x) >> SID_SHIFT) & SID_MASK) + +/* 1T segments */ +#define SID_SHIFT_1T 40 +#define SID_MASK_1T 0xffffffUL +#define ESID_MASK_1T 0xffffff0000000000UL +#define GET_ESID_1T(x) (((x) >> SID_SHIFT_1T) & SID_MASK_1T) + +#ifndef __ASSEMBLY__ +#include + +typedef unsigned long pte_basic_t; + +static __inline__ void clear_page(void *addr) +{ + unsigned long lines, line_size; + + line_size = ppc64_caches.dline_size; + lines = ppc64_caches.dlines_per_page; + + __asm__ __volatile__( + "mtctr %1 # clear_page\n\ +1: dcbz 0,%0\n\ + add %0,%0,%3\n\ + bdnz+ 1b" + : "=r" (addr) + : "r" (lines), "0" (addr), "r" (line_size) + : "ctr", "memory"); +} + +extern void copy_4K_page(void *to, void *from); + +#ifdef CONFIG_PPC_64K_PAGES +static inline void copy_page(void *to, void *from) +{ + unsigned int i; + for (i=0; i < (1 << (PAGE_SHIFT - 12)); i++) { + copy_4K_page(to, from); + to += 4096; + from += 4096; + } +} +#else /* CONFIG_PPC_64K_PAGES */ +static inline void copy_page(void *to, void *from) +{ + copy_4K_page(to, from); +} +#endif /* CONFIG_PPC_64K_PAGES */ + +/* Log 2 of page table size */ +extern u64 ppc64_pft_size; + +/* Large pages size */ +#ifdef CONFIG_HUGETLB_PAGE +extern unsigned int HPAGE_SHIFT; +#else +#define HPAGE_SHIFT PAGE_SHIFT +#endif +#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) +#define HPAGE_MASK (~(HPAGE_SIZE - 1)) +#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) +#define HUGE_MAX_HSTATE 3 + +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_PPC_MM_SLICES + +#define SLICE_LOW_SHIFT 28 +#define SLICE_HIGH_SHIFT 40 + +#define SLICE_LOW_TOP (0x100000000ul) +#define SLICE_NUM_LOW (SLICE_LOW_TOP >> SLICE_LOW_SHIFT) +#define SLICE_NUM_HIGH (PGTABLE_RANGE >> SLICE_HIGH_SHIFT) + +#define GET_LOW_SLICE_INDEX(addr) ((addr) >> SLICE_LOW_SHIFT) +#define GET_HIGH_SLICE_INDEX(addr) ((addr) >> SLICE_HIGH_SHIFT) + +#ifndef __ASSEMBLY__ + +struct slice_mask { + u16 low_slices; + u16 high_slices; +}; + +struct mm_struct; + +extern unsigned long slice_get_unmapped_area(unsigned long addr, + unsigned long len, + unsigned long flags, + unsigned int psize, + int topdown, + int use_cache); + +extern unsigned int get_slice_psize(struct mm_struct *mm, + unsigned long addr); + +extern void slice_init_context(struct mm_struct *mm, unsigned int psize); +extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize); +extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start, + unsigned long len, unsigned int psize); + +#define slice_mm_new_context(mm) ((mm)->context.id == 0) + +#endif /* __ASSEMBLY__ */ +#else +#define slice_init() +#define get_slice_psize(mm, addr) ((mm)->context.user_psize) +#define slice_set_user_psize(mm, psize) \ +do { \ + (mm)->context.user_psize = (psize); \ + (mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \ +} while (0) +#define slice_set_range_psize(mm, start, len, psize) \ + slice_set_user_psize((mm), (psize)) +#define slice_mm_new_context(mm) 1 +#endif /* CONFIG_PPC_MM_SLICES */ + +#ifdef CONFIG_HUGETLB_PAGE + +#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA + +#endif /* !CONFIG_HUGETLB_PAGE */ + +#ifdef MODULE +#define __page_aligned __attribute__((__aligned__(PAGE_SIZE))) +#else +#define __page_aligned \ + __attribute__((__aligned__(PAGE_SIZE), \ + __section__(".data.page_aligned"))) +#endif + +#define VM_DATA_DEFAULT_FLAGS \ + (test_thread_flag(TIF_32BIT) ? \ + VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64) + +/* + * This is the default if a program doesn't have a PT_GNU_STACK + * program header entry. The PPC64 ELF ABI has a non executable stack + * stack by default, so in the absense of a PT_GNU_STACK program header + * we turn execute permission off. + */ +#define VM_STACK_DEFAULT_FLAGS32 (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#define VM_STACK_DEFAULT_FLAGS64 (VM_READ | VM_WRITE | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#define VM_STACK_DEFAULT_FLAGS \ + (test_thread_flag(TIF_32BIT) ? \ + VM_STACK_DEFAULT_FLAGS32 : VM_STACK_DEFAULT_FLAGS64) + +#include + +#endif /* _ASM_POWERPC_PAGE_64_H */ diff --git a/arch/powerpc/include/asm/param.h b/arch/powerpc/include/asm/param.h new file mode 100644 index 000000000000..094f63d4d5ca --- /dev/null +++ b/arch/powerpc/include/asm/param.h @@ -0,0 +1,22 @@ +#ifndef _ASM_POWERPC_PARAM_H +#define _ASM_POWERPC_PARAM_H + +#ifdef __KERNEL__ +#define HZ CONFIG_HZ /* internal kernel timer frequency */ +#define USER_HZ 100 /* for user interfaces in "ticks" */ +#define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ +#endif /* __KERNEL__ */ + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _ASM_POWERPC_PARAM_H */ diff --git a/arch/powerpc/include/asm/parport.h b/arch/powerpc/include/asm/parport.h new file mode 100644 index 000000000000..414c50e2e881 --- /dev/null +++ b/arch/powerpc/include/asm/parport.h @@ -0,0 +1,39 @@ +/* + * parport.h: platform-specific PC-style parport initialisation + * + * Copyright (C) 1999, 2000 Tim Waugh + * + * This file should only be included by drivers/parport/parport_pc.c. + */ + +#ifndef _ASM_POWERPC_PARPORT_H +#define _ASM_POWERPC_PARPORT_H +#ifdef __KERNEL__ + +#include + +static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) +{ + struct device_node *np; + const u32 *prop; + u32 io1, io2; + int propsize; + int count = 0; + for (np = NULL; (np = of_find_compatible_node(np, + "parallel", + "pnpPNP,400")) != NULL;) { + prop = of_get_property(np, "reg", &propsize); + if (!prop || propsize > 6*sizeof(u32)) + continue; + io1 = prop[1]; io2 = prop[2]; + prop = of_get_property(np, "interrupts", NULL); + if (!prop) + continue; + if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL) != NULL) + count++; + } + return count; +} + +#endif /* __KERNEL__ */ +#endif /* !(_ASM_POWERPC_PARPORT_H) */ diff --git a/arch/powerpc/include/asm/pasemi_dma.h b/arch/powerpc/include/asm/pasemi_dma.h new file mode 100644 index 000000000000..19fd7933e2d9 --- /dev/null +++ b/arch/powerpc/include/asm/pasemi_dma.h @@ -0,0 +1,538 @@ +/* + * Copyright (C) 2006-2008 PA Semi, Inc + * + * Hardware register layout and descriptor formats for the on-board + * DMA engine on PA Semi PWRficient. Used by ethernet, function and security + * drivers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef ASM_PASEMI_DMA_H +#define ASM_PASEMI_DMA_H + +/* status register layout in IOB region, at 0xfb800000 */ +struct pasdma_status { + u64 rx_sta[64]; /* RX channel status */ + u64 tx_sta[20]; /* TX channel status */ +}; + + +/* All these registers live in the PCI configuration space for the DMA PCI + * device. Use the normal PCI config access functions for them. + */ +enum { + PAS_DMA_CAP_TXCH = 0x44, /* Transmit Channel Info */ + PAS_DMA_CAP_RXCH = 0x48, /* Transmit Channel Info */ + PAS_DMA_CAP_IFI = 0x4c, /* Interface Info */ + PAS_DMA_COM_TXCMD = 0x100, /* Transmit Command Register */ + PAS_DMA_COM_TXSTA = 0x104, /* Transmit Status Register */ + PAS_DMA_COM_RXCMD = 0x108, /* Receive Command Register */ + PAS_DMA_COM_RXSTA = 0x10c, /* Receive Status Register */ + PAS_DMA_COM_CFG = 0x114, /* Common config reg */ + PAS_DMA_TXF_SFLG0 = 0x140, /* Set flags */ + PAS_DMA_TXF_SFLG1 = 0x144, /* Set flags */ + PAS_DMA_TXF_CFLG0 = 0x148, /* Set flags */ + PAS_DMA_TXF_CFLG1 = 0x14c, /* Set flags */ +}; + + +#define PAS_DMA_CAP_TXCH_TCHN_M 0x00ff0000 /* # of TX channels */ +#define PAS_DMA_CAP_TXCH_TCHN_S 16 + +#define PAS_DMA_CAP_RXCH_RCHN_M 0x00ff0000 /* # of RX channels */ +#define PAS_DMA_CAP_RXCH_RCHN_S 16 + +#define PAS_DMA_CAP_IFI_IOFF_M 0xff000000 /* Cfg reg for intf pointers */ +#define PAS_DMA_CAP_IFI_IOFF_S 24 +#define PAS_DMA_CAP_IFI_NIN_M 0x00ff0000 /* # of interfaces */ +#define PAS_DMA_CAP_IFI_NIN_S 16 + +#define PAS_DMA_COM_TXCMD_EN 0x00000001 /* enable */ +#define PAS_DMA_COM_TXSTA_ACT 0x00000001 /* active */ +#define PAS_DMA_COM_RXCMD_EN 0x00000001 /* enable */ +#define PAS_DMA_COM_RXSTA_ACT 0x00000001 /* active */ + + +/* Per-interface and per-channel registers */ +#define _PAS_DMA_RXINT_STRIDE 0x20 +#define PAS_DMA_RXINT_RCMDSTA(i) (0x200+(i)*_PAS_DMA_RXINT_STRIDE) +#define PAS_DMA_RXINT_RCMDSTA_EN 0x00000001 +#define PAS_DMA_RXINT_RCMDSTA_ST 0x00000002 +#define PAS_DMA_RXINT_RCMDSTA_MBT 0x00000008 +#define PAS_DMA_RXINT_RCMDSTA_MDR 0x00000010 +#define PAS_DMA_RXINT_RCMDSTA_MOO 0x00000020 +#define PAS_DMA_RXINT_RCMDSTA_MBP 0x00000040 +#define PAS_DMA_RXINT_RCMDSTA_BT 0x00000800 +#define PAS_DMA_RXINT_RCMDSTA_DR 0x00001000 +#define PAS_DMA_RXINT_RCMDSTA_OO 0x00002000 +#define PAS_DMA_RXINT_RCMDSTA_BP 0x00004000 +#define PAS_DMA_RXINT_RCMDSTA_TB 0x00008000 +#define PAS_DMA_RXINT_RCMDSTA_ACT 0x00010000 +#define PAS_DMA_RXINT_RCMDSTA_DROPS_M 0xfffe0000 +#define PAS_DMA_RXINT_RCMDSTA_DROPS_S 17 +#define PAS_DMA_RXINT_CFG(i) (0x204+(i)*_PAS_DMA_RXINT_STRIDE) +#define PAS_DMA_RXINT_CFG_RBP 0x80000000 +#define PAS_DMA_RXINT_CFG_ITRR 0x40000000 +#define PAS_DMA_RXINT_CFG_DHL_M 0x07000000 +#define PAS_DMA_RXINT_CFG_DHL_S 24 +#define PAS_DMA_RXINT_CFG_DHL(x) (((x) << PAS_DMA_RXINT_CFG_DHL_S) & \ + PAS_DMA_RXINT_CFG_DHL_M) +#define PAS_DMA_RXINT_CFG_ITR 0x00400000 +#define PAS_DMA_RXINT_CFG_LW 0x00200000 +#define PAS_DMA_RXINT_CFG_L2 0x00100000 +#define PAS_DMA_RXINT_CFG_HEN 0x00080000 +#define PAS_DMA_RXINT_CFG_WIF 0x00000002 +#define PAS_DMA_RXINT_CFG_WIL 0x00000001 + +#define PAS_DMA_RXINT_INCR(i) (0x210+(i)*_PAS_DMA_RXINT_STRIDE) +#define PAS_DMA_RXINT_INCR_INCR_M 0x0000ffff +#define PAS_DMA_RXINT_INCR_INCR_S 0 +#define PAS_DMA_RXINT_INCR_INCR(x) ((x) & 0x0000ffff) +#define PAS_DMA_RXINT_BASEL(i) (0x218+(i)*_PAS_DMA_RXINT_STRIDE) +#define PAS_DMA_RXINT_BASEL_BRBL(x) ((x) & ~0x3f) +#define PAS_DMA_RXINT_BASEU(i) (0x21c+(i)*_PAS_DMA_RXINT_STRIDE) +#define PAS_DMA_RXINT_BASEU_BRBH(x) ((x) & 0xfff) +#define PAS_DMA_RXINT_BASEU_SIZ_M 0x3fff0000 /* # of cache lines worth of buffer ring */ +#define PAS_DMA_RXINT_BASEU_SIZ_S 16 /* 0 = 16K */ +#define PAS_DMA_RXINT_BASEU_SIZ(x) (((x) << PAS_DMA_RXINT_BASEU_SIZ_S) & \ + PAS_DMA_RXINT_BASEU_SIZ_M) + + +#define _PAS_DMA_TXCHAN_STRIDE 0x20 /* Size per channel */ +#define _PAS_DMA_TXCHAN_TCMDSTA 0x300 /* Command / Status */ +#define _PAS_DMA_TXCHAN_CFG 0x304 /* Configuration */ +#define _PAS_DMA_TXCHAN_DSCRBU 0x308 /* Descriptor BU Allocation */ +#define _PAS_DMA_TXCHAN_INCR 0x310 /* Descriptor increment */ +#define _PAS_DMA_TXCHAN_CNT 0x314 /* Descriptor count/offset */ +#define _PAS_DMA_TXCHAN_BASEL 0x318 /* Descriptor ring base (low) */ +#define _PAS_DMA_TXCHAN_BASEU 0x31c /* (high) */ +#define PAS_DMA_TXCHAN_TCMDSTA(c) (0x300+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_TCMDSTA_EN 0x00000001 /* Enabled */ +#define PAS_DMA_TXCHAN_TCMDSTA_ST 0x00000002 /* Stop interface */ +#define PAS_DMA_TXCHAN_TCMDSTA_ACT 0x00010000 /* Active */ +#define PAS_DMA_TXCHAN_TCMDSTA_SZ 0x00000800 +#define PAS_DMA_TXCHAN_TCMDSTA_DB 0x00000400 +#define PAS_DMA_TXCHAN_TCMDSTA_DE 0x00000200 +#define PAS_DMA_TXCHAN_TCMDSTA_DA 0x00000100 +#define PAS_DMA_TXCHAN_CFG(c) (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_CFG_TY_IFACE 0x00000000 /* Type = interface */ +#define PAS_DMA_TXCHAN_CFG_TY_COPY 0x00000001 /* Type = copy only */ +#define PAS_DMA_TXCHAN_CFG_TY_FUNC 0x00000002 /* Type = function */ +#define PAS_DMA_TXCHAN_CFG_TY_XOR 0x00000003 /* Type = xor only */ +#define PAS_DMA_TXCHAN_CFG_TATTR_M 0x0000003c +#define PAS_DMA_TXCHAN_CFG_TATTR_S 2 +#define PAS_DMA_TXCHAN_CFG_TATTR(x) (((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \ + PAS_DMA_TXCHAN_CFG_TATTR_M) +#define PAS_DMA_TXCHAN_CFG_LPDQ 0x00000800 +#define PAS_DMA_TXCHAN_CFG_LPSQ 0x00000400 +#define PAS_DMA_TXCHAN_CFG_WT_M 0x000003c0 +#define PAS_DMA_TXCHAN_CFG_WT_S 6 +#define PAS_DMA_TXCHAN_CFG_WT(x) (((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \ + PAS_DMA_TXCHAN_CFG_WT_M) +#define PAS_DMA_TXCHAN_CFG_TRD 0x00010000 /* translate data */ +#define PAS_DMA_TXCHAN_CFG_TRR 0x00008000 /* translate rings */ +#define PAS_DMA_TXCHAN_CFG_UP 0x00004000 /* update tx descr when sent */ +#define PAS_DMA_TXCHAN_CFG_CL 0x00002000 /* Clean last line */ +#define PAS_DMA_TXCHAN_CFG_CF 0x00001000 /* Clean first line */ +#define PAS_DMA_TXCHAN_INCR(c) (0x310+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_BASEL(c) (0x318+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_BASEL_BRBL_M 0xffffffc0 +#define PAS_DMA_TXCHAN_BASEL_BRBL_S 0 +#define PAS_DMA_TXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_TXCHAN_BASEL_BRBL_S) & \ + PAS_DMA_TXCHAN_BASEL_BRBL_M) +#define PAS_DMA_TXCHAN_BASEU(c) (0x31c+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_BASEU_BRBH_M 0x00000fff +#define PAS_DMA_TXCHAN_BASEU_BRBH_S 0 +#define PAS_DMA_TXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_TXCHAN_BASEU_BRBH_S) & \ + PAS_DMA_TXCHAN_BASEU_BRBH_M) +/* # of cache lines worth of buffer ring */ +#define PAS_DMA_TXCHAN_BASEU_SIZ_M 0x3fff0000 +#define PAS_DMA_TXCHAN_BASEU_SIZ_S 16 /* 0 = 16K */ +#define PAS_DMA_TXCHAN_BASEU_SIZ(x) (((x) << PAS_DMA_TXCHAN_BASEU_SIZ_S) & \ + PAS_DMA_TXCHAN_BASEU_SIZ_M) + +#define _PAS_DMA_RXCHAN_STRIDE 0x20 /* Size per channel */ +#define _PAS_DMA_RXCHAN_CCMDSTA 0x800 /* Command / Status */ +#define _PAS_DMA_RXCHAN_CFG 0x804 /* Configuration */ +#define _PAS_DMA_RXCHAN_INCR 0x810 /* Descriptor increment */ +#define _PAS_DMA_RXCHAN_CNT 0x814 /* Descriptor count/offset */ +#define _PAS_DMA_RXCHAN_BASEL 0x818 /* Descriptor ring base (low) */ +#define _PAS_DMA_RXCHAN_BASEU 0x81c /* (high) */ +#define PAS_DMA_RXCHAN_CCMDSTA(c) (0x800+(c)*_PAS_DMA_RXCHAN_STRIDE) +#define PAS_DMA_RXCHAN_CCMDSTA_EN 0x00000001 /* Enabled */ +#define PAS_DMA_RXCHAN_CCMDSTA_ST 0x00000002 /* Stop interface */ +#define PAS_DMA_RXCHAN_CCMDSTA_ACT 0x00010000 /* Active */ +#define PAS_DMA_RXCHAN_CCMDSTA_DU 0x00020000 +#define PAS_DMA_RXCHAN_CCMDSTA_OD 0x00002000 +#define PAS_DMA_RXCHAN_CCMDSTA_FD 0x00001000 +#define PAS_DMA_RXCHAN_CCMDSTA_DT 0x00000800 +#define PAS_DMA_RXCHAN_CFG(c) (0x804+(c)*_PAS_DMA_RXCHAN_STRIDE) +#define PAS_DMA_RXCHAN_CFG_CTR 0x00000400 +#define PAS_DMA_RXCHAN_CFG_HBU_M 0x00000380 +#define PAS_DMA_RXCHAN_CFG_HBU_S 7 +#define PAS_DMA_RXCHAN_CFG_HBU(x) (((x) << PAS_DMA_RXCHAN_CFG_HBU_S) & \ + PAS_DMA_RXCHAN_CFG_HBU_M) +#define PAS_DMA_RXCHAN_INCR(c) (0x810+(c)*_PAS_DMA_RXCHAN_STRIDE) +#define PAS_DMA_RXCHAN_BASEL(c) (0x818+(c)*_PAS_DMA_RXCHAN_STRIDE) +#define PAS_DMA_RXCHAN_BASEL_BRBL_M 0xffffffc0 +#define PAS_DMA_RXCHAN_BASEL_BRBL_S 0 +#define PAS_DMA_RXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_RXCHAN_BASEL_BRBL_S) & \ + PAS_DMA_RXCHAN_BASEL_BRBL_M) +#define PAS_DMA_RXCHAN_BASEU(c) (0x81c+(c)*_PAS_DMA_RXCHAN_STRIDE) +#define PAS_DMA_RXCHAN_BASEU_BRBH_M 0x00000fff +#define PAS_DMA_RXCHAN_BASEU_BRBH_S 0 +#define PAS_DMA_RXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_RXCHAN_BASEU_BRBH_S) & \ + PAS_DMA_RXCHAN_BASEU_BRBH_M) +/* # of cache lines worth of buffer ring */ +#define PAS_DMA_RXCHAN_BASEU_SIZ_M 0x3fff0000 +#define PAS_DMA_RXCHAN_BASEU_SIZ_S 16 /* 0 = 16K */ +#define PAS_DMA_RXCHAN_BASEU_SIZ(x) (((x) << PAS_DMA_RXCHAN_BASEU_SIZ_S) & \ + PAS_DMA_RXCHAN_BASEU_SIZ_M) + +#define PAS_STATUS_PCNT_M 0x000000000000ffffull +#define PAS_STATUS_PCNT_S 0 +#define PAS_STATUS_DCNT_M 0x00000000ffff0000ull +#define PAS_STATUS_DCNT_S 16 +#define PAS_STATUS_BPCNT_M 0x0000ffff00000000ull +#define PAS_STATUS_BPCNT_S 32 +#define PAS_STATUS_CAUSE_M 0xf000000000000000ull +#define PAS_STATUS_TIMER 0x1000000000000000ull +#define PAS_STATUS_ERROR 0x2000000000000000ull +#define PAS_STATUS_SOFT 0x4000000000000000ull +#define PAS_STATUS_INT 0x8000000000000000ull + +#define PAS_IOB_COM_PKTHDRCNT 0x120 +#define PAS_IOB_COM_PKTHDRCNT_PKTHDR1_M 0x0fff0000 +#define PAS_IOB_COM_PKTHDRCNT_PKTHDR1_S 16 +#define PAS_IOB_COM_PKTHDRCNT_PKTHDR0_M 0x00000fff +#define PAS_IOB_COM_PKTHDRCNT_PKTHDR0_S 0 + +#define PAS_IOB_DMA_RXCH_CFG(i) (0x1100 + (i)*4) +#define PAS_IOB_DMA_RXCH_CFG_CNTTH_M 0x00000fff +#define PAS_IOB_DMA_RXCH_CFG_CNTTH_S 0 +#define PAS_IOB_DMA_RXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_RXCH_CFG_CNTTH_S) & \ + PAS_IOB_DMA_RXCH_CFG_CNTTH_M) +#define PAS_IOB_DMA_TXCH_CFG(i) (0x1200 + (i)*4) +#define PAS_IOB_DMA_TXCH_CFG_CNTTH_M 0x00000fff +#define PAS_IOB_DMA_TXCH_CFG_CNTTH_S 0 +#define PAS_IOB_DMA_TXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_TXCH_CFG_CNTTH_S) & \ + PAS_IOB_DMA_TXCH_CFG_CNTTH_M) +#define PAS_IOB_DMA_RXCH_STAT(i) (0x1300 + (i)*4) +#define PAS_IOB_DMA_RXCH_STAT_INTGEN 0x00001000 +#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_M 0x00000fff +#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_S 0 +#define PAS_IOB_DMA_RXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_RXCH_STAT_CNTDEL_S) &\ + PAS_IOB_DMA_RXCH_STAT_CNTDEL_M) +#define PAS_IOB_DMA_TXCH_STAT(i) (0x1400 + (i)*4) +#define PAS_IOB_DMA_TXCH_STAT_INTGEN 0x00001000 +#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_M 0x00000fff +#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_S 0 +#define PAS_IOB_DMA_TXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_TXCH_STAT_CNTDEL_S) &\ + PAS_IOB_DMA_TXCH_STAT_CNTDEL_M) +#define PAS_IOB_DMA_RXCH_RESET(i) (0x1500 + (i)*4) +#define PAS_IOB_DMA_RXCH_RESET_PCNT_M 0xffff0000 +#define PAS_IOB_DMA_RXCH_RESET_PCNT_S 16 +#define PAS_IOB_DMA_RXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \ + PAS_IOB_DMA_RXCH_RESET_PCNT_M) +#define PAS_IOB_DMA_RXCH_RESET_PCNTRST 0x00000020 +#define PAS_IOB_DMA_RXCH_RESET_DCNTRST 0x00000010 +#define PAS_IOB_DMA_RXCH_RESET_TINTC 0x00000008 +#define PAS_IOB_DMA_RXCH_RESET_DINTC 0x00000004 +#define PAS_IOB_DMA_RXCH_RESET_SINTC 0x00000002 +#define PAS_IOB_DMA_RXCH_RESET_PINTC 0x00000001 +#define PAS_IOB_DMA_TXCH_RESET(i) (0x1600 + (i)*4) +#define PAS_IOB_DMA_TXCH_RESET_PCNT_M 0xffff0000 +#define PAS_IOB_DMA_TXCH_RESET_PCNT_S 16 +#define PAS_IOB_DMA_TXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \ + PAS_IOB_DMA_TXCH_RESET_PCNT_M) +#define PAS_IOB_DMA_TXCH_RESET_PCNTRST 0x00000020 +#define PAS_IOB_DMA_TXCH_RESET_DCNTRST 0x00000010 +#define PAS_IOB_DMA_TXCH_RESET_TINTC 0x00000008 +#define PAS_IOB_DMA_TXCH_RESET_DINTC 0x00000004 +#define PAS_IOB_DMA_TXCH_RESET_SINTC 0x00000002 +#define PAS_IOB_DMA_TXCH_RESET_PINTC 0x00000001 + +#define PAS_IOB_DMA_COM_TIMEOUTCFG 0x1700 +#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M 0x00ffffff +#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S 0 +#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(x) (((x) << PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S) & \ + PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M) + +/* Transmit descriptor fields */ +#define XCT_MACTX_T 0x8000000000000000ull +#define XCT_MACTX_ST 0x4000000000000000ull +#define XCT_MACTX_NORES 0x0000000000000000ull +#define XCT_MACTX_8BRES 0x1000000000000000ull +#define XCT_MACTX_24BRES 0x2000000000000000ull +#define XCT_MACTX_40BRES 0x3000000000000000ull +#define XCT_MACTX_I 0x0800000000000000ull +#define XCT_MACTX_O 0x0400000000000000ull +#define XCT_MACTX_E 0x0200000000000000ull +#define XCT_MACTX_VLAN_M 0x0180000000000000ull +#define XCT_MACTX_VLAN_NOP 0x0000000000000000ull +#define XCT_MACTX_VLAN_REMOVE 0x0080000000000000ull +#define XCT_MACTX_VLAN_INSERT 0x0100000000000000ull +#define XCT_MACTX_VLAN_REPLACE 0x0180000000000000ull +#define XCT_MACTX_CRC_M 0x0060000000000000ull +#define XCT_MACTX_CRC_NOP 0x0000000000000000ull +#define XCT_MACTX_CRC_INSERT 0x0020000000000000ull +#define XCT_MACTX_CRC_PAD 0x0040000000000000ull +#define XCT_MACTX_CRC_REPLACE 0x0060000000000000ull +#define XCT_MACTX_SS 0x0010000000000000ull +#define XCT_MACTX_LLEN_M 0x00007fff00000000ull +#define XCT_MACTX_LLEN_S 32ull +#define XCT_MACTX_LLEN(x) ((((long)(x)) << XCT_MACTX_LLEN_S) & \ + XCT_MACTX_LLEN_M) +#define XCT_MACTX_IPH_M 0x00000000f8000000ull +#define XCT_MACTX_IPH_S 27ull +#define XCT_MACTX_IPH(x) ((((long)(x)) << XCT_MACTX_IPH_S) & \ + XCT_MACTX_IPH_M) +#define XCT_MACTX_IPO_M 0x0000000007c00000ull +#define XCT_MACTX_IPO_S 22ull +#define XCT_MACTX_IPO(x) ((((long)(x)) << XCT_MACTX_IPO_S) & \ + XCT_MACTX_IPO_M) +#define XCT_MACTX_CSUM_M 0x0000000000000060ull +#define XCT_MACTX_CSUM_NOP 0x0000000000000000ull +#define XCT_MACTX_CSUM_TCP 0x0000000000000040ull +#define XCT_MACTX_CSUM_UDP 0x0000000000000060ull +#define XCT_MACTX_V6 0x0000000000000010ull +#define XCT_MACTX_C 0x0000000000000004ull +#define XCT_MACTX_AL2 0x0000000000000002ull + +/* Receive descriptor fields */ +#define XCT_MACRX_T 0x8000000000000000ull +#define XCT_MACRX_ST 0x4000000000000000ull +#define XCT_MACRX_RR_M 0x3000000000000000ull +#define XCT_MACRX_RR_NORES 0x0000000000000000ull +#define XCT_MACRX_RR_8BRES 0x1000000000000000ull +#define XCT_MACRX_O 0x0400000000000000ull +#define XCT_MACRX_E 0x0200000000000000ull +#define XCT_MACRX_FF 0x0100000000000000ull +#define XCT_MACRX_PF 0x0080000000000000ull +#define XCT_MACRX_OB 0x0040000000000000ull +#define XCT_MACRX_OD 0x0020000000000000ull +#define XCT_MACRX_FS 0x0010000000000000ull +#define XCT_MACRX_NB_M 0x000fc00000000000ull +#define XCT_MACRX_NB_S 46ULL +#define XCT_MACRX_NB(x) ((((long)(x)) << XCT_MACRX_NB_S) & \ + XCT_MACRX_NB_M) +#define XCT_MACRX_LLEN_M 0x00003fff00000000ull +#define XCT_MACRX_LLEN_S 32ULL +#define XCT_MACRX_LLEN(x) ((((long)(x)) << XCT_MACRX_LLEN_S) & \ + XCT_MACRX_LLEN_M) +#define XCT_MACRX_CRC 0x0000000080000000ull +#define XCT_MACRX_LEN_M 0x0000000060000000ull +#define XCT_MACRX_LEN_TOOSHORT 0x0000000020000000ull +#define XCT_MACRX_LEN_BELOWMIN 0x0000000040000000ull +#define XCT_MACRX_LEN_TRUNC 0x0000000060000000ull +#define XCT_MACRX_CAST_M 0x0000000018000000ull +#define XCT_MACRX_CAST_UNI 0x0000000000000000ull +#define XCT_MACRX_CAST_MULTI 0x0000000008000000ull +#define XCT_MACRX_CAST_BROAD 0x0000000010000000ull +#define XCT_MACRX_CAST_PAUSE 0x0000000018000000ull +#define XCT_MACRX_VLC_M 0x0000000006000000ull +#define XCT_MACRX_FM 0x0000000001000000ull +#define XCT_MACRX_HTY_M 0x0000000000c00000ull +#define XCT_MACRX_HTY_IPV4_OK 0x0000000000000000ull +#define XCT_MACRX_HTY_IPV6 0x0000000000400000ull +#define XCT_MACRX_HTY_IPV4_BAD 0x0000000000800000ull +#define XCT_MACRX_HTY_NONIP 0x0000000000c00000ull +#define XCT_MACRX_IPP_M 0x00000000003f0000ull +#define XCT_MACRX_IPP_S 16 +#define XCT_MACRX_CSUM_M 0x000000000000ffffull +#define XCT_MACRX_CSUM_S 0 + +#define XCT_PTR_T 0x8000000000000000ull +#define XCT_PTR_LEN_M 0x7ffff00000000000ull +#define XCT_PTR_LEN_S 44 +#define XCT_PTR_LEN(x) ((((long)(x)) << XCT_PTR_LEN_S) & \ + XCT_PTR_LEN_M) +#define XCT_PTR_ADDR_M 0x00000fffffffffffull +#define XCT_PTR_ADDR_S 0 +#define XCT_PTR_ADDR(x) ((((long)(x)) << XCT_PTR_ADDR_S) & \ + XCT_PTR_ADDR_M) + +/* Receive interface 8byte result fields */ +#define XCT_RXRES_8B_L4O_M 0xff00000000000000ull +#define XCT_RXRES_8B_L4O_S 56 +#define XCT_RXRES_8B_RULE_M 0x00ffff0000000000ull +#define XCT_RXRES_8B_RULE_S 40 +#define XCT_RXRES_8B_EVAL_M 0x000000ffff000000ull +#define XCT_RXRES_8B_EVAL_S 24 +#define XCT_RXRES_8B_HTYPE_M 0x0000000000f00000ull +#define XCT_RXRES_8B_HASH_M 0x00000000000fffffull +#define XCT_RXRES_8B_HASH_S 0 + +/* Receive interface buffer fields */ +#define XCT_RXB_LEN_M 0x0ffff00000000000ull +#define XCT_RXB_LEN_S 44 +#define XCT_RXB_LEN(x) ((((long)(x)) << XCT_RXB_LEN_S) & \ + XCT_RXB_LEN_M) +#define XCT_RXB_ADDR_M 0x00000fffffffffffull +#define XCT_RXB_ADDR_S 0 +#define XCT_RXB_ADDR(x) ((((long)(x)) << XCT_RXB_ADDR_S) & \ + XCT_RXB_ADDR_M) + +/* Copy descriptor fields */ +#define XCT_COPY_T 0x8000000000000000ull +#define XCT_COPY_ST 0x4000000000000000ull +#define XCT_COPY_RR_M 0x3000000000000000ull +#define XCT_COPY_RR_NORES 0x0000000000000000ull +#define XCT_COPY_RR_8BRES 0x1000000000000000ull +#define XCT_COPY_RR_24BRES 0x2000000000000000ull +#define XCT_COPY_RR_40BRES 0x3000000000000000ull +#define XCT_COPY_I 0x0800000000000000ull +#define XCT_COPY_O 0x0400000000000000ull +#define XCT_COPY_E 0x0200000000000000ull +#define XCT_COPY_STY_ZERO 0x01c0000000000000ull +#define XCT_COPY_DTY_PREF 0x0038000000000000ull +#define XCT_COPY_LLEN_M 0x0007ffff00000000ull +#define XCT_COPY_LLEN_S 32 +#define XCT_COPY_LLEN(x) ((((long)(x)) << XCT_COPY_LLEN_S) & \ + XCT_COPY_LLEN_M) +#define XCT_COPY_SE 0x0000000000000001ull + +/* Function descriptor fields */ +#define XCT_FUN_T 0x8000000000000000ull +#define XCT_FUN_ST 0x4000000000000000ull +#define XCT_FUN_RR_M 0x3000000000000000ull +#define XCT_FUN_RR_NORES 0x0000000000000000ull +#define XCT_FUN_RR_8BRES 0x1000000000000000ull +#define XCT_FUN_RR_24BRES 0x2000000000000000ull +#define XCT_FUN_RR_40BRES 0x3000000000000000ull +#define XCT_FUN_I 0x0800000000000000ull +#define XCT_FUN_O 0x0400000000000000ull +#define XCT_FUN_E 0x0200000000000000ull +#define XCT_FUN_FUN_M 0x01c0000000000000ull +#define XCT_FUN_FUN_S 54 +#define XCT_FUN_FUN(x) ((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M) +#define XCT_FUN_CRM_M 0x0038000000000000ull +#define XCT_FUN_CRM_NOP 0x0000000000000000ull +#define XCT_FUN_CRM_SIG 0x0008000000000000ull +#define XCT_FUN_LLEN_M 0x0007ffff00000000ull +#define XCT_FUN_LLEN_S 32 +#define XCT_FUN_LLEN(x) ((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M) +#define XCT_FUN_SHL_M 0x00000000f8000000ull +#define XCT_FUN_SHL_S 27 +#define XCT_FUN_SHL(x) ((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M) +#define XCT_FUN_CHL_M 0x0000000007c00000ull +#define XCT_FUN_HSZ_M 0x00000000003c0000ull +#define XCT_FUN_ALG_M 0x0000000000038000ull +#define XCT_FUN_HP 0x0000000000004000ull +#define XCT_FUN_BCM_M 0x0000000000003800ull +#define XCT_FUN_BCP_M 0x0000000000000600ull +#define XCT_FUN_SIG_M 0x00000000000001f0ull +#define XCT_FUN_SIG_TCP4 0x0000000000000140ull +#define XCT_FUN_SIG_TCP6 0x0000000000000150ull +#define XCT_FUN_SIG_UDP4 0x0000000000000160ull +#define XCT_FUN_SIG_UDP6 0x0000000000000170ull +#define XCT_FUN_A 0x0000000000000008ull +#define XCT_FUN_C 0x0000000000000004ull +#define XCT_FUN_AL2 0x0000000000000002ull +#define XCT_FUN_SE 0x0000000000000001ull + +/* Function descriptor 8byte result fields */ +#define XCT_FUNRES_8B_CS_M 0x0000ffff00000000ull +#define XCT_FUNRES_8B_CS_S 32 +#define XCT_FUNRES_8B_CRC_M 0x00000000ffffffffull +#define XCT_FUNRES_8B_CRC_S 0 + +/* Control descriptor fields */ +#define CTRL_CMD_T 0x8000000000000000ull +#define CTRL_CMD_META_EVT 0x2000000000000000ull +#define CTRL_CMD_O 0x0400000000000000ull +#define CTRL_CMD_ETYPE_M 0x0038000000000000ull +#define CTRL_CMD_ETYPE_EXT 0x0000000000000000ull +#define CTRL_CMD_ETYPE_WSET 0x0020000000000000ull +#define CTRL_CMD_ETYPE_WCLR 0x0028000000000000ull +#define CTRL_CMD_ETYPE_SET 0x0030000000000000ull +#define CTRL_CMD_ETYPE_CLR 0x0038000000000000ull +#define CTRL_CMD_REG_M 0x000000000000007full +#define CTRL_CMD_REG_S 0 +#define CTRL_CMD_REG(x) ((((long)(x)) << CTRL_CMD_REG_S) & \ + CTRL_CMD_REG_M) + + + +/* Prototypes for the shared DMA functions in the platform code. */ + +/* DMA TX Channel type. Right now only limitations used are event types 0/1, + * for event-triggered DMA transactions. + */ + +enum pasemi_dmachan_type { + RXCHAN = 0, /* Any RX chan */ + TXCHAN = 1, /* Any TX chan */ + TXCHAN_EVT0 = 0x1001, /* TX chan in event class 0 (chan 0-9) */ + TXCHAN_EVT1 = 0x2001, /* TX chan in event class 1 (chan 10-19) */ +}; + +struct pasemi_dmachan { + int chno; /* Channel number */ + enum pasemi_dmachan_type chan_type; /* TX / RX */ + u64 *status; /* Ptr to cacheable status */ + int irq; /* IRQ used by channel */ + unsigned int ring_size; /* size of allocated ring */ + dma_addr_t ring_dma; /* DMA address for ring */ + u64 *ring_virt; /* Virt address for ring */ + void *priv; /* Ptr to start of client struct */ +}; + +/* Read/write the different registers in the I/O Bridge, Ethernet + * and DMA Controller + */ +extern unsigned int pasemi_read_iob_reg(unsigned int reg); +extern void pasemi_write_iob_reg(unsigned int reg, unsigned int val); + +extern unsigned int pasemi_read_mac_reg(int intf, unsigned int reg); +extern void pasemi_write_mac_reg(int intf, unsigned int reg, unsigned int val); + +extern unsigned int pasemi_read_dma_reg(unsigned int reg); +extern void pasemi_write_dma_reg(unsigned int reg, unsigned int val); + +/* Channel management routines */ + +extern void *pasemi_dma_alloc_chan(enum pasemi_dmachan_type type, + int total_size, int offset); +extern void pasemi_dma_free_chan(struct pasemi_dmachan *chan); + +extern void pasemi_dma_start_chan(const struct pasemi_dmachan *chan, + const u32 cmdsta); +extern int pasemi_dma_stop_chan(const struct pasemi_dmachan *chan); + +/* Common routines to allocate rings and buffers */ + +extern int pasemi_dma_alloc_ring(struct pasemi_dmachan *chan, int ring_size); +extern void pasemi_dma_free_ring(struct pasemi_dmachan *chan); + +extern void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size, + dma_addr_t *handle); +extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size, + dma_addr_t *handle); + +/* Routines to allocate flags (events) for channel syncronization */ +extern int pasemi_dma_alloc_flag(void); +extern void pasemi_dma_free_flag(int flag); +extern void pasemi_dma_set_flag(int flag); +extern void pasemi_dma_clear_flag(int flag); + +/* Routines to allocate function engines */ +extern int pasemi_dma_alloc_fun(void); +extern void pasemi_dma_free_fun(int fun); + +/* Initialize the library, must be called before any other functions */ +extern int pasemi_dma_init(void); + +#endif /* ASM_PASEMI_DMA_H */ diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h new file mode 100644 index 000000000000..ae2ea803a0f2 --- /dev/null +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -0,0 +1,302 @@ +#ifndef _ASM_POWERPC_PCI_BRIDGE_H +#define _ASM_POWERPC_PCI_BRIDGE_H +#ifdef __KERNEL__ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include + +struct device_node; + +extern unsigned int ppc_pci_flags; +enum { + /* Force re-assigning all resources (ignore firmware + * setup completely) + */ + PPC_PCI_REASSIGN_ALL_RSRC = 0x00000001, + + /* Re-assign all bus numbers */ + PPC_PCI_REASSIGN_ALL_BUS = 0x00000002, + + /* Do not try to assign, just use existing setup */ + PPC_PCI_PROBE_ONLY = 0x00000004, + + /* Don't bother with ISA alignment unless the bridge has + * ISA forwarding enabled + */ + PPC_PCI_CAN_SKIP_ISA_ALIGN = 0x00000008, + + /* Enable domain numbers in /proc */ + PPC_PCI_ENABLE_PROC_DOMAINS = 0x00000010, + /* ... except for domain 0 */ + PPC_PCI_COMPAT_DOMAIN_0 = 0x00000020, +}; + + +/* + * Structure of a PCI controller (host bridge) + */ +struct pci_controller { + struct pci_bus *bus; + char is_dynamic; +#ifdef CONFIG_PPC64 + int node; +#endif + struct device_node *dn; + struct list_head list_node; + struct device *parent; + + int first_busno; + int last_busno; +#ifndef CONFIG_PPC64 + int self_busno; +#endif + + void __iomem *io_base_virt; +#ifdef CONFIG_PPC64 + void *io_base_alloc; +#endif + resource_size_t io_base_phys; +#ifndef CONFIG_PPC64 + resource_size_t pci_io_size; +#endif + + /* Some machines (PReP) have a non 1:1 mapping of + * the PCI memory space in the CPU bus space + */ + resource_size_t pci_mem_offset; +#ifdef CONFIG_PPC64 + unsigned long pci_io_size; +#endif + + struct pci_ops *ops; + unsigned int __iomem *cfg_addr; + void __iomem *cfg_data; + +#ifndef CONFIG_PPC64 + /* + * Used for variants of PCI indirect handling and possible quirks: + * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1 + * EXT_REG - provides access to PCI-e extended registers + * SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS + * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS + * to determine which bus number to match on when generating type0 + * config cycles + * NO_PCIE_LINK - the Freescale PCI-e controllers have issues with + * hanging if we don't have link and try to do config cycles to + * anything but the PHB. Only allow talking to the PHB if this is + * set. + * BIG_ENDIAN - cfg_addr is a big endian register + * BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on + * the PLB4. Effectively disable MRM commands by setting this. + */ +#define PPC_INDIRECT_TYPE_SET_CFG_TYPE 0x00000001 +#define PPC_INDIRECT_TYPE_EXT_REG 0x00000002 +#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004 +#define PPC_INDIRECT_TYPE_NO_PCIE_LINK 0x00000008 +#define PPC_INDIRECT_TYPE_BIG_ENDIAN 0x00000010 +#define PPC_INDIRECT_TYPE_BROKEN_MRM 0x00000020 + u32 indirect_type; +#endif /* !CONFIG_PPC64 */ + /* Currently, we limit ourselves to 1 IO range and 3 mem + * ranges since the common pci_bus structure can't handle more + */ + struct resource io_resource; + struct resource mem_resources[3]; + int global_number; /* PCI domain number */ +#ifdef CONFIG_PPC64 + unsigned long buid; + unsigned long dma_window_base_cur; + unsigned long dma_window_size; + + void *private_data; +#endif /* CONFIG_PPC64 */ +}; + +#ifndef CONFIG_PPC64 + +static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) +{ + return bus->sysdata; +} + +static inline int isa_vaddr_is_ioport(void __iomem *address) +{ + /* No specific ISA handling on ppc32 at this stage, it + * all goes through PCI + */ + return 0; +} + +/* These are used for config access before all the PCI probing + has been done. */ +extern int early_read_config_byte(struct pci_controller *hose, int bus, + int dev_fn, int where, u8 *val); +extern int early_read_config_word(struct pci_controller *hose, int bus, + int dev_fn, int where, u16 *val); +extern int early_read_config_dword(struct pci_controller *hose, int bus, + int dev_fn, int where, u32 *val); +extern int early_write_config_byte(struct pci_controller *hose, int bus, + int dev_fn, int where, u8 val); +extern int early_write_config_word(struct pci_controller *hose, int bus, + int dev_fn, int where, u16 val); +extern int early_write_config_dword(struct pci_controller *hose, int bus, + int dev_fn, int where, u32 val); + +extern int early_find_capability(struct pci_controller *hose, int bus, + int dev_fn, int cap); + +extern void setup_indirect_pci(struct pci_controller* hose, + resource_size_t cfg_addr, + resource_size_t cfg_data, u32 flags); +extern void setup_grackle(struct pci_controller *hose); +#else /* CONFIG_PPC64 */ + +/* + * PCI stuff, for nodes representing PCI devices, pointed to + * by device_node->data. + */ +struct iommu_table; + +struct pci_dn { + int busno; /* pci bus number */ + int devfn; /* pci device and function number */ + + struct pci_controller *phb; /* for pci devices */ + struct iommu_table *iommu_table; /* for phb's or bridges */ + struct device_node *node; /* back-pointer to the device_node */ + + int pci_ext_config_space; /* for pci devices */ + +#ifdef CONFIG_EEH + struct pci_dev *pcidev; /* back-pointer to the pci device */ + int class_code; /* pci device class */ + int eeh_mode; /* See eeh.h for possible EEH_MODEs */ + int eeh_config_addr; + int eeh_pe_config_addr; /* new-style partition endpoint address */ + int eeh_check_count; /* # times driver ignored error */ + int eeh_freeze_count; /* # times this device froze up. */ + int eeh_false_positives; /* # times this device reported #ff's */ + u32 config_space[16]; /* saved PCI config space */ +#endif +}; + +/* Get the pointer to a device_node's pci_dn */ +#define PCI_DN(dn) ((struct pci_dn *) (dn)->data) + +extern struct device_node *fetch_dev_dn(struct pci_dev *dev); + +/* Get a device_node from a pci_dev. This code must be fast except + * in the case where the sysdata is incorrect and needs to be fixed + * up (this will only happen once). + * In this case the sysdata will have been inherited from a PCI host + * bridge or a PCI-PCI bridge further up the tree, so it will point + * to a valid struct pci_dn, just not the one we want. + */ +static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev) +{ + struct device_node *dn = dev->sysdata; + struct pci_dn *pdn = dn->data; + + if (pdn && pdn->devfn == dev->devfn && pdn->busno == dev->bus->number) + return dn; /* fast path. sysdata is good */ + return fetch_dev_dn(dev); +} + +static inline int pci_device_from_OF_node(struct device_node *np, + u8 *bus, u8 *devfn) +{ + if (!PCI_DN(np)) + return -ENODEV; + *bus = PCI_DN(np)->busno; + *devfn = PCI_DN(np)->devfn; + return 0; +} + +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) +{ + if (bus->self) + return pci_device_to_OF_node(bus->self); + else + return bus->sysdata; /* Must be root bus (PHB) */ +} + +/** Find the bus corresponding to the indicated device node */ +extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn); + +/** Remove all of the PCI devices under this bus */ +extern void pcibios_remove_pci_devices(struct pci_bus *bus); + +/** Discover new pci devices under this bus, and add them */ +extern void pcibios_add_pci_devices(struct pci_bus *bus); +extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus); + +extern int pcibios_remove_root_bus(struct pci_controller *phb); + +static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) +{ + struct device_node *busdn = bus->sysdata; + + BUG_ON(busdn == NULL); + return PCI_DN(busdn)->phb; +} + + +extern void isa_bridge_find_early(struct pci_controller *hose); + +static inline int isa_vaddr_is_ioport(void __iomem *address) +{ + /* Check if address hits the reserved legacy IO range */ + unsigned long ea = (unsigned long)address; + return ea >= ISA_IO_BASE && ea < ISA_IO_END; +} + +extern int pcibios_unmap_io_space(struct pci_bus *bus); +extern int pcibios_map_io_space(struct pci_bus *bus); + +/* Return values for ppc_md.pci_probe_mode function */ +#define PCI_PROBE_NONE -1 /* Don't look at this bus at all */ +#define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */ +#define PCI_PROBE_DEVTREE 1 /* Instantiate from device tree */ + +#ifdef CONFIG_NUMA +#define PHB_SET_NODE(PHB, NODE) ((PHB)->node = (NODE)) +#else +#define PHB_SET_NODE(PHB, NODE) ((PHB)->node = -1) +#endif + +#endif /* CONFIG_PPC64 */ + +/* Get the PCI host controller for an OF device */ +extern struct pci_controller *pci_find_hose_for_OF_device( + struct device_node* node); + +/* Fill up host controller resources from the OF node */ +extern void pci_process_bridge_OF_ranges(struct pci_controller *hose, + struct device_node *dev, int primary); + +/* Allocate & free a PCI host bridge structure */ +extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev); +extern void pcibios_free_controller(struct pci_controller *phb); + +#ifdef CONFIG_PCI +extern unsigned long pci_address_to_pio(phys_addr_t address); +extern int pcibios_vaddr_is_ioport(void __iomem *address); +#else +static inline unsigned long pci_address_to_pio(phys_addr_t address) +{ + return (unsigned long)-1; +} +static inline int pcibios_vaddr_is_ioport(void __iomem *address) +{ + return 0; +} +#endif /* CONFIG_PCI */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PCI_BRIDGE_H */ diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h new file mode 100644 index 000000000000..a05a942b1c25 --- /dev/null +++ b/arch/powerpc/include/asm/pci.h @@ -0,0 +1,228 @@ +#ifndef __ASM_POWERPC_PCI_H +#define __ASM_POWERPC_PCI_H +#ifdef __KERNEL__ + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +#define PCIBIOS_MIN_IO 0x1000 +#define PCIBIOS_MIN_MEM 0x10000000 + +struct pci_dev; + +/* Values for the `which' argument to sys_pciconfig_iobase syscall. */ +#define IOBASE_BRIDGE_NUMBER 0 +#define IOBASE_MEMORY 1 +#define IOBASE_IO 2 +#define IOBASE_ISA_IO 3 +#define IOBASE_ISA_MEM 4 + +/* + * Set this to 1 if you want the kernel to re-assign all PCI + * bus numbers (don't do that on ppc64 yet !) + */ +#define pcibios_assign_all_busses() (ppc_pci_flags & \ + PPC_PCI_REASSIGN_ALL_BUS) +#define pcibios_scan_all_fns(a, b) 0 + +static inline void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + +static inline void pcibios_penalize_isa_irq(int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + if (ppc_md.pci_get_legacy_ide_irq) + return ppc_md.pci_get_legacy_ide_irq(dev, channel); + return channel ? 15 : 14; +} + +#ifdef CONFIG_PPC64 + +/* + * We want to avoid touching the cacheline size or MWI bit. + * pSeries firmware sets the cacheline size (which is not the cpu cacheline + * size in all cases) and hardware treats MWI the same as memory write. + */ +#define PCI_DISABLE_MWI + +#ifdef CONFIG_PCI +extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops); +extern struct dma_mapping_ops *get_pci_dma_ops(void); + +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + unsigned long cacheline_size; + u8 byte; + + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte); + if (byte == 0) + cacheline_size = 1024; + else + cacheline_size = (int) byte * 4; + + *strat = PCI_DMA_BURST_MULTIPLE; + *strategy_parameter = cacheline_size; +} +#else /* CONFIG_PCI */ +#define set_pci_dma_ops(d) +#define get_pci_dma_ops() NULL +#endif + +#else /* 32-bit */ + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif +#endif /* CONFIG_PPC64 */ + +extern int pci_domain_nr(struct pci_bus *bus); + +/* Decide whether to display the domain number in /proc */ +extern int pci_proc_domain(struct pci_bus *bus); + + +struct vm_area_struct; +/* Map a range of PCI memory or I/O space for a device into user space */ +int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); + +/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */ +#define HAVE_PCI_MMAP 1 + +#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE) +/* + * For 64-bit kernels, pci_unmap_{single,page} is not a nop. + * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and + * so on are not nops. + * and thus... + */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) + +#else /* 32-bit && coherent */ + +/* pci_unmap_{page,single} is a nop so... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) +#define pci_unmap_addr(PTR, ADDR_NAME) (0) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define pci_unmap_len(PTR, LEN_NAME) (0) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) + +#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */ + +#ifdef CONFIG_PPC64 + +/* The PCI address space does not equal the physical memory address + * space (we have an IOMMU). The IDE and SCSI device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (0) + +#else /* 32-bit */ + +/* The PCI address space does equal the physical memory + * address space (no IOMMU). The IDE and SCSI device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) + +#endif /* CONFIG_PPC64 */ + +extern void pcibios_resource_to_bus(struct pci_dev *dev, + struct pci_bus_region *region, + struct resource *res); + +extern void pcibios_bus_to_resource(struct pci_dev *dev, + struct resource *res, + struct pci_bus_region *region); + +static inline struct resource *pcibios_select_root(struct pci_dev *pdev, + struct resource *res) +{ + struct resource *root = NULL; + + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + if (res->flags & IORESOURCE_MEM) + root = &iomem_resource; + + return root; +} + +extern void pcibios_setup_new_device(struct pci_dev *dev); + +extern void pcibios_claim_one_bus(struct pci_bus *b); + +extern void pcibios_resource_survey(void); + +extern struct pci_controller *init_phb_dynamic(struct device_node *dn); + +extern struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn); + +extern void of_scan_pci_bridge(struct device_node *node, + struct pci_dev *dev); + +extern void of_scan_bus(struct device_node *node, struct pci_bus *bus); + +extern int pci_read_irq_line(struct pci_dev *dev); + +struct file; +extern pgprot_t pci_phys_mem_access_prot(struct file *file, + unsigned long pfn, + unsigned long size, + pgprot_t prot); + +#define HAVE_ARCH_PCI_RESOURCE_TO_USER +extern void pci_resource_to_user(const struct pci_dev *dev, int bar, + const struct resource *rsrc, + resource_size_t *start, resource_size_t *end); + +extern void pcibios_do_bus_setup(struct pci_bus *bus); +extern void pcibios_fixup_of_probed_bus(struct pci_bus *bus); + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_PCI_H */ diff --git a/arch/powerpc/include/asm/percpu.h b/arch/powerpc/include/asm/percpu.h new file mode 100644 index 000000000000..f879252b7ea6 --- /dev/null +++ b/arch/powerpc/include/asm/percpu.h @@ -0,0 +1,24 @@ +#ifndef _ASM_POWERPC_PERCPU_H_ +#define _ASM_POWERPC_PERCPU_H_ +#ifdef __powerpc64__ +#include + +/* + * Same as asm-generic/percpu.h, except that we store the per cpu offset + * in the paca. Based on the x86-64 implementation. + */ + +#ifdef CONFIG_SMP + +#include + +#define __per_cpu_offset(cpu) (paca[cpu].data_offset) +#define __my_cpu_offset local_paca->data_offset +#define per_cpu_offset(x) (__per_cpu_offset(x)) + +#endif /* CONFIG_SMP */ +#endif /* __powerpc64__ */ + +#include + +#endif /* _ASM_POWERPC_PERCPU_H_ */ diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h new file mode 100644 index 000000000000..58c07147b3ea --- /dev/null +++ b/arch/powerpc/include/asm/pgalloc-32.h @@ -0,0 +1,43 @@ +#ifndef _ASM_POWERPC_PGALLOC_32_H +#define _ASM_POWERPC_PGALLOC_32_H + +#include + +extern void __bad_pte(pmd_t *pmd); + +extern pgd_t *pgd_alloc(struct mm_struct *mm); +extern void pgd_free(struct mm_struct *mm, pgd_t *pgd); + +/* + * We don't have any real pmd's, and this code never triggers because + * the pgd will always be present.. + */ +/* #define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) */ +#define pmd_free(mm, x) do { } while (0) +#define __pmd_free_tlb(tlb,x) do { } while (0) +/* #define pgd_populate(mm, pmd, pte) BUG() */ + +#ifndef CONFIG_BOOKE +#define pmd_populate_kernel(mm, pmd, pte) \ + (pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT) +#define pmd_populate(mm, pmd, pte) \ + (pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT) +#define pmd_pgtable(pmd) pmd_page(pmd) +#else +#define pmd_populate_kernel(mm, pmd, pte) \ + (pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT) +#define pmd_populate(mm, pmd, pte) \ + (pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT) +#define pmd_pgtable(pmd) pmd_page(pmd) +#endif + +extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr); +extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr); +extern void pte_free_kernel(struct mm_struct *mm, pte_t *pte); +extern void pte_free(struct mm_struct *mm, pgtable_t pte); + +#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte)) + +#define check_pgt_cache() do { } while (0) + +#endif /* _ASM_POWERPC_PGALLOC_32_H */ diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h new file mode 100644 index 000000000000..812a1d8f35cb --- /dev/null +++ b/arch/powerpc/include/asm/pgalloc-64.h @@ -0,0 +1,166 @@ +#ifndef _ASM_POWERPC_PGALLOC_64_H +#define _ASM_POWERPC_PGALLOC_64_H +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include + +#ifndef CONFIG_PPC_SUBPAGE_PROT +static inline void subpage_prot_free(pgd_t *pgd) {} +#endif + +extern struct kmem_cache *pgtable_cache[]; + +#define PGD_CACHE_NUM 0 +#define PUD_CACHE_NUM 1 +#define PMD_CACHE_NUM 1 +#define HUGEPTE_CACHE_NUM 2 +#define PTE_NONCACHE_NUM 7 /* from GFP rather than kmem_cache */ + +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + return kmem_cache_alloc(pgtable_cache[PGD_CACHE_NUM], GFP_KERNEL); +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + subpage_prot_free(pgd); + kmem_cache_free(pgtable_cache[PGD_CACHE_NUM], pgd); +} + +#ifndef CONFIG_PPC_64K_PAGES + +#define pgd_populate(MM, PGD, PUD) pgd_set(PGD, PUD) + +static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + return kmem_cache_alloc(pgtable_cache[PUD_CACHE_NUM], + GFP_KERNEL|__GFP_REPEAT); +} + +static inline void pud_free(struct mm_struct *mm, pud_t *pud) +{ + kmem_cache_free(pgtable_cache[PUD_CACHE_NUM], pud); +} + +static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) +{ + pud_set(pud, (unsigned long)pmd); +} + +#define pmd_populate(mm, pmd, pte_page) \ + pmd_populate_kernel(mm, pmd, page_address(pte_page)) +#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, (unsigned long)(pte)) +#define pmd_pgtable(pmd) pmd_page(pmd) + + +#else /* CONFIG_PPC_64K_PAGES */ + +#define pud_populate(mm, pud, pmd) pud_set(pud, (unsigned long)pmd) + +static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, + pte_t *pte) +{ + pmd_set(pmd, (unsigned long)pte); +} + +#define pmd_populate(mm, pmd, pte_page) \ + pmd_populate_kernel(mm, pmd, page_address(pte_page)) +#define pmd_pgtable(pmd) pmd_page(pmd) + +#endif /* CONFIG_PPC_64K_PAGES */ + +static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + return kmem_cache_alloc(pgtable_cache[PMD_CACHE_NUM], + GFP_KERNEL|__GFP_REPEAT); +} + +static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) +{ + kmem_cache_free(pgtable_cache[PMD_CACHE_NUM], pmd); +} + +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); +} + +static inline pgtable_t pte_alloc_one(struct mm_struct *mm, + unsigned long address) +{ + struct page *page; + pte_t *pte; + + pte = pte_alloc_one_kernel(mm, address); + if (!pte) + return NULL; + page = virt_to_page(pte); + pgtable_page_ctor(page); + return page; +} + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + free_page((unsigned long)pte); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage) +{ + pgtable_page_dtor(ptepage); + __free_page(ptepage); +} + +#define PGF_CACHENUM_MASK 0x7 + +typedef struct pgtable_free { + unsigned long val; +} pgtable_free_t; + +static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum, + unsigned long mask) +{ + BUG_ON(cachenum > PGF_CACHENUM_MASK); + + return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum}; +} + +static inline void pgtable_free(pgtable_free_t pgf) +{ + void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK); + int cachenum = pgf.val & PGF_CACHENUM_MASK; + + if (cachenum == PTE_NONCACHE_NUM) + free_page((unsigned long)p); + else + kmem_cache_free(pgtable_cache[cachenum], p); +} + +extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf); + +#define __pte_free_tlb(tlb,ptepage) \ +do { \ + pgtable_page_dtor(ptepage); \ + pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \ + PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \ +} while (0) +#define __pmd_free_tlb(tlb, pmd) \ + pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \ + PMD_CACHE_NUM, PMD_TABLE_SIZE-1)) +#ifndef CONFIG_PPC_64K_PAGES +#define __pud_free_tlb(tlb, pud) \ + pgtable_free_tlb(tlb, pgtable_free_cache(pud, \ + PUD_CACHE_NUM, PUD_TABLE_SIZE-1)) +#endif /* CONFIG_PPC_64K_PAGES */ + +#define check_pgt_cache() do { } while (0) + +#endif /* _ASM_POWERPC_PGALLOC_64_H */ diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h new file mode 100644 index 000000000000..b4505ed0f0f2 --- /dev/null +++ b/arch/powerpc/include/asm/pgalloc.h @@ -0,0 +1,12 @@ +#ifndef _ASM_POWERPC_PGALLOC_H +#define _ASM_POWERPC_PGALLOC_H +#ifdef __KERNEL__ + +#ifdef CONFIG_PPC64 +#include +#else +#include +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PGALLOC_H */ diff --git a/arch/powerpc/include/asm/pgtable-4k.h b/arch/powerpc/include/asm/pgtable-4k.h new file mode 100644 index 000000000000..6b18ba9d2d85 --- /dev/null +++ b/arch/powerpc/include/asm/pgtable-4k.h @@ -0,0 +1,117 @@ +#ifndef _ASM_POWERPC_PGTABLE_4K_H +#define _ASM_POWERPC_PGTABLE_4K_H +/* + * Entries per page directory level. The PTE level must use a 64b record + * for each page table entry. The PMD and PGD level use a 32b record for + * each entry by assuming that each entry is page aligned. + */ +#define PTE_INDEX_SIZE 9 +#define PMD_INDEX_SIZE 7 +#define PUD_INDEX_SIZE 7 +#define PGD_INDEX_SIZE 9 + +#ifndef __ASSEMBLY__ +#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_INDEX_SIZE) +#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) +#define PUD_TABLE_SIZE (sizeof(pud_t) << PUD_INDEX_SIZE) +#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) +#endif /* __ASSEMBLY__ */ + +#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) +#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) +#define PTRS_PER_PUD (1 << PMD_INDEX_SIZE) +#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) + +/* PMD_SHIFT determines what a second-level page table entry can map */ +#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) + +/* With 4k base page size, hugepage PTEs go at the PMD level */ +#define MIN_HUGEPTE_SHIFT PMD_SHIFT + +/* PUD_SHIFT determines what a third-level page table entry can map */ +#define PUD_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE) +#define PUD_SIZE (1UL << PUD_SHIFT) +#define PUD_MASK (~(PUD_SIZE-1)) + +/* PGDIR_SHIFT determines what a fourth-level page table entry can map */ +#define PGDIR_SHIFT (PUD_SHIFT + PUD_INDEX_SIZE) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* PTE bits */ +#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */ +#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */ +#define _PAGE_GROUP_IX 0x7000 /* software: HPTE index within group */ +#define _PAGE_F_SECOND _PAGE_SECONDARY +#define _PAGE_F_GIX _PAGE_GROUP_IX +#define _PAGE_SPECIAL 0x10000 /* software: special page */ +#define __HAVE_ARCH_PTE_SPECIAL + +/* PTE flags to conserve for HPTE identification */ +#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \ + _PAGE_SECONDARY | _PAGE_GROUP_IX) + +/* There is no 4K PFN hack on 4K pages */ +#define _PAGE_4K_PFN 0 + +/* PAGE_MASK gives the right answer below, but only by accident */ +/* It should be preserving the high 48 bits and then specifically */ +/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */ +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \ + _PAGE_HPTEFLAGS) + +/* Bits to mask out from a PMD to get to the PTE page */ +#define PMD_MASKED_BITS 0 +/* Bits to mask out from a PUD to get to the PMD page */ +#define PUD_MASKED_BITS 0 +/* Bits to mask out from a PGD to get to the PUD page */ +#define PGD_MASKED_BITS 0 + +/* shift to put page number into pte */ +#define PTE_RPN_SHIFT (17) + +#ifdef STRICT_MM_TYPECHECKS +#define __real_pte(e,p) ((real_pte_t){(e)}) +#define __rpte_to_pte(r) ((r).pte) +#else +#define __real_pte(e,p) (e) +#define __rpte_to_pte(r) (__pte(r)) +#endif +#define __rpte_to_hidx(r,index) (pte_val(__rpte_to_pte(r)) >> 12) + +#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \ + do { \ + index = 0; \ + shift = mmu_psize_defs[psize].shift; \ + +#define pte_iterate_hashed_end() } while(0) + +#ifdef CONFIG_PPC_HAS_HASH_64K +#define pte_pagesize_index(mm, addr, pte) get_slice_psize(mm, addr) +#else +#define pte_pagesize_index(mm, addr, pte) MMU_PAGE_4K +#endif + +/* + * 4-level page tables related bits + */ + +#define pgd_none(pgd) (!pgd_val(pgd)) +#define pgd_bad(pgd) (pgd_val(pgd) == 0) +#define pgd_present(pgd) (pgd_val(pgd) != 0) +#define pgd_clear(pgdp) (pgd_val(*(pgdp)) = 0) +#define pgd_page_vaddr(pgd) (pgd_val(pgd) & ~PGD_MASKED_BITS) +#define pgd_page(pgd) virt_to_page(pgd_page_vaddr(pgd)) + +#define pud_offset(pgdp, addr) \ + (((pud_t *) pgd_page_vaddr(*(pgdp))) + \ + (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))) + +#define pud_ERROR(e) \ + printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e)) + +#define remap_4k_pfn(vma, addr, pfn, prot) \ + remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot)) +#endif /* _ASM_POWERPC_PGTABLE_4K_H */ diff --git a/arch/powerpc/include/asm/pgtable-64k.h b/arch/powerpc/include/asm/pgtable-64k.h new file mode 100644 index 000000000000..07b0d8f09cb6 --- /dev/null +++ b/arch/powerpc/include/asm/pgtable-64k.h @@ -0,0 +1,155 @@ +#ifndef _ASM_POWERPC_PGTABLE_64K_H +#define _ASM_POWERPC_PGTABLE_64K_H + +#include + + +#define PTE_INDEX_SIZE 12 +#define PMD_INDEX_SIZE 12 +#define PUD_INDEX_SIZE 0 +#define PGD_INDEX_SIZE 4 + +#ifndef __ASSEMBLY__ +#define PTE_TABLE_SIZE (sizeof(real_pte_t) << PTE_INDEX_SIZE) +#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) +#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) + +#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) +#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) +#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) + +#ifdef CONFIG_PPC_SUBPAGE_PROT +/* + * For the sub-page protection option, we extend the PGD with one of + * these. Basically we have a 3-level tree, with the top level being + * the protptrs array. To optimize speed and memory consumption when + * only addresses < 4GB are being protected, pointers to the first + * four pages of sub-page protection words are stored in the low_prot + * array. + * Each page of sub-page protection words protects 1GB (4 bytes + * protects 64k). For the 3-level tree, each page of pointers then + * protects 8TB. + */ +struct subpage_prot_table { + unsigned long maxaddr; /* only addresses < this are protected */ + unsigned int **protptrs[2]; + unsigned int *low_prot[4]; +}; + +#undef PGD_TABLE_SIZE +#define PGD_TABLE_SIZE ((sizeof(pgd_t) << PGD_INDEX_SIZE) + \ + sizeof(struct subpage_prot_table)) + +#define SBP_L1_BITS (PAGE_SHIFT - 2) +#define SBP_L2_BITS (PAGE_SHIFT - 3) +#define SBP_L1_COUNT (1 << SBP_L1_BITS) +#define SBP_L2_COUNT (1 << SBP_L2_BITS) +#define SBP_L2_SHIFT (PAGE_SHIFT + SBP_L1_BITS) +#define SBP_L3_SHIFT (SBP_L2_SHIFT + SBP_L2_BITS) + +extern void subpage_prot_free(pgd_t *pgd); + +static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) +{ + return (struct subpage_prot_table *)(pgd + PTRS_PER_PGD); +} +#endif /* CONFIG_PPC_SUBPAGE_PROT */ +#endif /* __ASSEMBLY__ */ + +/* With 4k base page size, hugepage PTEs go at the PMD level */ +#define MIN_HUGEPTE_SHIFT PAGE_SHIFT + +/* PMD_SHIFT determines what a second-level page table entry can map */ +#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define PGDIR_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* Additional PTE bits (don't change without checking asm in hash_low.S) */ +#define __HAVE_ARCH_PTE_SPECIAL +#define _PAGE_SPECIAL 0x00000400 /* software: special page */ +#define _PAGE_HPTE_SUB 0x0ffff000 /* combo only: sub pages HPTE bits */ +#define _PAGE_HPTE_SUB0 0x08000000 /* combo only: first sub page */ +#define _PAGE_COMBO 0x10000000 /* this is a combo 4k page */ +#define _PAGE_4K_PFN 0x20000000 /* PFN is for a single 4k page */ + +/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead, + * we set that to be the whole sub-bits mask. The C code will only + * test this, so a multi-bit mask will work. For combo pages, this + * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of + * all the sub bits. For real 64k pages, we now have the assembly set + * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap + * that mask. This is fine as long as the HIDX bits are never set on + * a PTE that isn't hashed, which is the case today. + * + * A little nit is for the huge page C code, which does the hashing + * in C, we need to provide which bit to use. + */ +#define _PAGE_HASHPTE _PAGE_HPTE_SUB + +/* Note the full page bits must be in the same location as for normal + * 4k pages as the same asssembly will be used to insert 64K pages + * wether the kernel has CONFIG_PPC_64K_PAGES or not + */ +#define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */ +#define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */ + +/* PTE flags to conserve for HPTE identification */ +#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO) + +/* Shift to put page number into pte. + * + * That gives us a max RPN of 34 bits, which means a max of 50 bits + * of addressable physical space, or 46 bits for the special 4k PFNs. + */ +#define PTE_RPN_SHIFT (30) +#define PTE_RPN_MAX (1UL << (64 - PTE_RPN_SHIFT)) +#define PTE_RPN_MASK (~((1UL<> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf)) +#define __rpte_to_pte(r) ((r).pte) +#define __rpte_sub_valid(rpte, index) \ + (pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index))) + + +/* Trick: we set __end to va + 64k, which happens works for + * a 16M page as well as we want only one iteration + */ +#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \ + do { \ + unsigned long __end = va + PAGE_SIZE; \ + unsigned __split = (psize == MMU_PAGE_4K || \ + psize == MMU_PAGE_64K_AP); \ + shift = mmu_psize_defs[psize].shift; \ + for (index = 0; va < __end; index++, va += (1L << shift)) { \ + if (!__split || __rpte_sub_valid(rpte, index)) do { \ + +#define pte_iterate_hashed_end() } while(0); } } while(0) + +#define pte_pagesize_index(mm, addr, pte) \ + (((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K) + +#define remap_4k_pfn(vma, addr, pfn, prot) \ + remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \ + __pgprot(pgprot_val((prot)) | _PAGE_4K_PFN)) + +#endif /* _ASM_POWERPC_PGTABLE_64K_H */ diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h new file mode 100644 index 000000000000..6fe39e327047 --- /dev/null +++ b/arch/powerpc/include/asm/pgtable-ppc32.h @@ -0,0 +1,802 @@ +#ifndef _ASM_POWERPC_PGTABLE_PPC32_H +#define _ASM_POWERPC_PGTABLE_PPC32_H + +#include + +#ifndef __ASSEMBLY__ +#include +#include +#include /* For sub-arch specific PPC_PIN_SIZE */ + +extern unsigned long va_to_phys(unsigned long address); +extern pte_t *va_to_pte(unsigned long address); +extern unsigned long ioremap_bot, ioremap_base; + +#ifdef CONFIG_44x +extern int icache_44x_need_flush; +#endif + +#endif /* __ASSEMBLY__ */ + +/* + * The PowerPC MMU uses a hash table containing PTEs, together with + * a set of 16 segment registers (on 32-bit implementations), to define + * the virtual to physical address mapping. + * + * We use the hash table as an extended TLB, i.e. a cache of currently + * active mappings. We maintain a two-level page table tree, much + * like that used by the i386, for the sake of the Linux memory + * management code. Low-level assembler code in hashtable.S + * (procedure hash_page) is responsible for extracting ptes from the + * tree and putting them into the hash table when necessary, and + * updating the accessed and modified bits in the page table tree. + */ + +/* + * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk. + * We also use the two level tables, but we can put the real bits in them + * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0, + * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has + * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit + * based upon user/super access. The TLB does not have accessed nor write + * protect. We assume that if the TLB get loaded with an entry it is + * accessed, and overload the changed bit for write protect. We use + * two bits in the software pte that are supposed to be set to zero in + * the TLB entry (24 and 25) for these indicators. Although the level 1 + * descriptor contains the guarded and writethrough/copyback bits, we can + * set these at the page level since they get copied from the Mx_TWC + * register when the TLB entry is loaded. We will use bit 27 for guard, since + * that is where it exists in the MD_TWC, and bit 26 for writethrough. + * These will get masked from the level 2 descriptor at TLB load time, and + * copied to the MD_TWC before it gets loaded. + * Large page sizes added. We currently support two sizes, 4K and 8M. + * This also allows a TLB hander optimization because we can directly + * load the PMD into MD_TWC. The 8M pages are only used for kernel + * mapping of well known areas. The PMD (PGD) entries contain control + * flags in addition to the address, so care must be taken that the + * software no longer assumes these are only pointers. + */ + +/* + * At present, all PowerPC 400-class processors share a similar TLB + * architecture. The instruction and data sides share a unified, + * 64-entry, fully-associative TLB which is maintained totally under + * software control. In addition, the instruction side has a + * hardware-managed, 4-entry, fully-associative TLB which serves as a + * first level to the shared TLB. These two TLBs are known as the UTLB + * and ITLB, respectively (see "mmu.h" for definitions). + */ + +/* + * The normal case is that PTEs are 32-bits and we have a 1-page + * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus + * + * For any >32-bit physical address platform, we can use the following + * two level page table layout where the pgdir is 8KB and the MS 13 bits + * are an index to the second level table. The combined pgdir/pmd first + * level has 2048 entries and the second level has 512 64-bit PTE entries. + * -Matt + */ +/* PGDIR_SHIFT determines what a top-level page table entry can map */ +#define PGDIR_SHIFT (PAGE_SHIFT + PTE_SHIFT) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * entries per page directory level: our page-table tree is two-level, so + * we don't really have any PMD directory. + */ +#ifndef __ASSEMBLY__ +#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_SHIFT) +#define PGD_TABLE_SIZE (sizeof(pgd_t) << (32 - PGDIR_SHIFT)) +#endif /* __ASSEMBLY__ */ + +#define PTRS_PER_PTE (1 << PTE_SHIFT) +#define PTRS_PER_PMD 1 +#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT)) + +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \ + (unsigned long long)pte_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +/* + * Just any arbitrary offset to the start of the vmalloc VM area: the + * current 64MB value just means that there will be a 64MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + * + * We no longer map larger than phys RAM with the BATs so we don't have + * to worry about the VMALLOC_OFFSET causing problems. We do have to worry + * about clashes between our early calls to ioremap() that start growing down + * from ioremap_base being run into the VM area allocations (growing upwards + * from VMALLOC_START). For this reason we have ioremap_bot to check when + * we actually run into our mappings setup in the early boot with the VM + * system. This really does become a problem for machines with good amounts + * of RAM. -- Cort + */ +#define VMALLOC_OFFSET (0x1000000) /* 16M */ +#ifdef PPC_PIN_SIZE +#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) +#else +#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) +#endif +#define VMALLOC_END ioremap_bot + +/* + * Bits in a linux-style PTE. These match the bits in the + * (hardware-defined) PowerPC PTE as closely as possible. + */ + +#if defined(CONFIG_40x) + +/* There are several potential gotchas here. The 40x hardware TLBLO + field looks like this: + + 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + RPN..................... 0 0 EX WR ZSEL....... W I M G + + Where possible we make the Linux PTE bits match up with this + + - bits 20 and 21 must be cleared, because we use 4k pages (40x can + support down to 1k pages), this is done in the TLBMiss exception + handler. + - We use only zones 0 (for kernel pages) and 1 (for user pages) + of the 16 available. Bit 24-26 of the TLB are cleared in the TLB + miss handler. Bit 27 is PAGE_USER, thus selecting the correct + zone. + - PRESENT *must* be in the bottom two bits because swap cache + entries use the top 30 bits. Because 40x doesn't support SMP + anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30 + is cleared in the TLB miss handler before the TLB entry is loaded. + - All other bits of the PTE are loaded into TLBLO without + modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for + software PTE bits. We actually use use bits 21, 24, 25, and + 30 respectively for the software bits: ACCESSED, DIRTY, RW, and + PRESENT. +*/ + +/* Definitions for 40x embedded chips. */ +#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */ +#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */ +#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */ +#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */ +#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */ +#define _PAGE_USER 0x010 /* matches one of the zone permission bits */ +#define _PAGE_RW 0x040 /* software: Writes permitted */ +#define _PAGE_DIRTY 0x080 /* software: dirty page */ +#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */ +#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */ +#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */ + +#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */ +#define _PMD_BAD 0x802 +#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */ +#define _PMD_SIZE_4M 0x0c0 +#define _PMD_SIZE_16M 0x0e0 +#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4)) + +/* Until my rework is finished, 40x still needs atomic PTE updates */ +#define PTE_ATOMIC_UPDATES 1 + +#elif defined(CONFIG_44x) +/* + * Definitions for PPC440 + * + * Because of the 3 word TLB entries to support 36-bit addressing, + * the attribute are difficult to map in such a fashion that they + * are easily loaded during exception processing. I decided to + * organize the entry so the ERPN is the only portion in the + * upper word of the PTE and the attribute bits below are packed + * in as sensibly as they can be in the area below a 4KB page size + * oriented RPN. This at least makes it easy to load the RPN and + * ERPN fields in the TLB. -Matt + * + * Note that these bits preclude future use of a page size + * less than 4KB. + * + * + * PPC 440 core has following TLB attribute fields; + * + * TLB1: + * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + * RPN................................. - - - - - - ERPN....... + * + * TLB2: + * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR + * + * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional + * TLB2 storage attibute fields. Those are: + * + * TLB2: + * 0...10 11 12 13 14 15 16...31 + * no change WL1 IL1I IL1D IL2I IL2D no change + * + * There are some constrains and options, to decide mapping software bits + * into TLB entry. + * + * - PRESENT *must* be in the bottom three bits because swap cache + * entries use the top 29 bits for TLB2. + * + * - FILE *must* be in the bottom three bits because swap cache + * entries use the top 29 bits for TLB2. + * + * - CACHE COHERENT bit (M) has no effect on PPC440 core, because it + * doesn't support SMP. So we can use this as software bit, like + * DIRTY. + * + * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used + * for memory protection related functions (see PTE structure in + * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the + * above bits. Note that the bit values are CPU specific, not architecture + * specific. + * + * The kernel PTE entry holds an arch-dependent swp_entry structure under + * certain situations. In other words, in such situations some portion of + * the PTE bits are used as a swp_entry. In the PPC implementation, the + * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still + * hold protection values. That means the three protection bits are + * reserved for both PTE and SWAP entry at the most significant three + * LSBs. + * + * There are three protection bits available for SWAP entry: + * _PAGE_PRESENT + * _PAGE_FILE + * _PAGE_HASHPTE (if HW has) + * + * So those three bits have to be inside of 0-2nd LSB of PTE. + * + */ + +#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */ +#define _PAGE_RW 0x00000002 /* S: Write permission */ +#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */ +#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */ +#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */ +#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */ +#define _PAGE_USER 0x00000040 /* S: User page */ +#define _PAGE_ENDIAN 0x00000080 /* H: E bit */ +#define _PAGE_GUARDED 0x00000100 /* H: G bit */ +#define _PAGE_COHERENT 0x00000200 /* H: M bit */ +#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */ +#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */ + +/* TODO: Add large page lowmem mapping support */ +#define _PMD_PRESENT 0 +#define _PMD_PRESENT_MASK (PAGE_MASK) +#define _PMD_BAD (~PAGE_MASK) + +/* ERPN in a PTE never gets cleared, ignore it */ +#define _PTE_NONE_MASK 0xffffffff00000000ULL + + +#elif defined(CONFIG_FSL_BOOKE) +/* + MMU Assist Register 3: + + 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63 + RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR + + - PRESENT *must* be in the bottom three bits because swap cache + entries use the top 29 bits. + + - FILE *must* be in the bottom three bits because swap cache + entries use the top 29 bits. +*/ + +/* Definitions for FSL Book-E Cores */ +#define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */ +#define _PAGE_USER 0x00002 /* S: User page (maps to UR) */ +#define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */ +#define _PAGE_RW 0x00004 /* S: Write permission (SW) */ +#define _PAGE_DIRTY 0x00008 /* S: Page dirty */ +#define _PAGE_HWEXEC 0x00010 /* H: SX permission */ +#define _PAGE_ACCESSED 0x00020 /* S: Page referenced */ + +#define _PAGE_ENDIAN 0x00040 /* H: E bit */ +#define _PAGE_GUARDED 0x00080 /* H: G bit */ +#define _PAGE_COHERENT 0x00100 /* H: M bit */ +#define _PAGE_NO_CACHE 0x00200 /* H: I bit */ +#define _PAGE_WRITETHRU 0x00400 /* H: W bit */ + +#ifdef CONFIG_PTE_64BIT +/* ERPN in a PTE never gets cleared, ignore it */ +#define _PTE_NONE_MASK 0xffffffffffff0000ULL +#endif + +#define _PMD_PRESENT 0 +#define _PMD_PRESENT_MASK (PAGE_MASK) +#define _PMD_BAD (~PAGE_MASK) + +#elif defined(CONFIG_8xx) +/* Definitions for 8xx embedded chips. */ +#define _PAGE_PRESENT 0x0001 /* Page is valid */ +#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */ +#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */ +#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */ + +/* These five software bits must be masked out when the entry is loaded + * into the TLB. + */ +#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */ +#define _PAGE_GUARDED 0x0010 /* software: guarded access */ +#define _PAGE_DIRTY 0x0020 /* software: page changed */ +#define _PAGE_RW 0x0040 /* software: user write access allowed */ +#define _PAGE_ACCESSED 0x0080 /* software: page referenced */ + +/* Setting any bits in the nibble with the follow two controls will + * require a TLB exception handler change. It is assumed unused bits + * are always zero. + */ +#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */ +#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */ + +#define _PMD_PRESENT 0x0001 +#define _PMD_BAD 0x0ff0 +#define _PMD_PAGE_MASK 0x000c +#define _PMD_PAGE_8M 0x000c + +#define _PTE_NONE_MASK _PAGE_ACCESSED + +/* Until my rework is finished, 8xx still needs atomic PTE updates */ +#define PTE_ATOMIC_UPDATES 1 + +#else /* CONFIG_6xx */ +/* Definitions for 60x, 740/750, etc. */ +#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */ +#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */ +#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */ +#define _PAGE_USER 0x004 /* usermode access allowed */ +#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */ +#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */ +#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */ +#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */ +#define _PAGE_DIRTY 0x080 /* C: page changed */ +#define _PAGE_ACCESSED 0x100 /* R: page referenced */ +#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */ +#define _PAGE_RW 0x400 /* software: user write access allowed */ + +#define _PTE_NONE_MASK _PAGE_HASHPTE + +#define _PMD_PRESENT 0 +#define _PMD_PRESENT_MASK (PAGE_MASK) +#define _PMD_BAD (~PAGE_MASK) + +/* Hash table based platforms need atomic updates of the linux PTE */ +#define PTE_ATOMIC_UPDATES 1 + +#endif + +/* + * Some bits are only used on some cpu families... + */ +#ifndef _PAGE_HASHPTE +#define _PAGE_HASHPTE 0 +#endif +#ifndef _PTE_NONE_MASK +#define _PTE_NONE_MASK 0 +#endif +#ifndef _PAGE_SHARED +#define _PAGE_SHARED 0 +#endif +#ifndef _PAGE_HWWRITE +#define _PAGE_HWWRITE 0 +#endif +#ifndef _PAGE_HWEXEC +#define _PAGE_HWEXEC 0 +#endif +#ifndef _PAGE_EXEC +#define _PAGE_EXEC 0 +#endif +#ifndef _PAGE_ENDIAN +#define _PAGE_ENDIAN 0 +#endif +#ifndef _PAGE_COHERENT +#define _PAGE_COHERENT 0 +#endif +#ifndef _PAGE_WRITETHRU +#define _PAGE_WRITETHRU 0 +#endif +#ifndef _PMD_PRESENT_MASK +#define _PMD_PRESENT_MASK _PMD_PRESENT +#endif +#ifndef _PMD_SIZE +#define _PMD_SIZE 0 +#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE() +#endif + +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) + + +#define PAGE_PROT_BITS __pgprot(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \ + _PAGE_WRITETHRU | _PAGE_ENDIAN | \ + _PAGE_USER | _PAGE_ACCESSED | \ + _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \ + _PAGE_EXEC | _PAGE_HWEXEC) +/* + * Note: the _PAGE_COHERENT bit automatically gets set in the hardware + * PTE if CONFIG_SMP is defined (hash_page does this); there is no need + * to have it in the Linux PTE, and in fact the bit could be reused for + * another purpose. -- paulus. + */ + +#ifdef CONFIG_44x +#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED) +#else +#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED) +#endif +#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE) +#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE) + +#ifdef CONFIG_PPC_STD_MMU +/* On standard PPC MMU, no user access implies kernel read/write access, + * so to write-protect kernel memory we must turn on user access */ +#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED | _PAGE_USER) +#else +#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED) +#endif + +#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED) +#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC) + +#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\ + defined(CONFIG_KPROBES) +/* We want the debuggers to be able to set breakpoints anywhere, so + * don't write protect the kernel text */ +#define _PAGE_RAM_TEXT _PAGE_RAM +#else +#define _PAGE_RAM_TEXT (_PAGE_KERNEL_RO | _PAGE_HWEXEC) +#endif + +#define PAGE_NONE __pgprot(_PAGE_BASE) +#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) +#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW) +#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC) +#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) + +#define PAGE_KERNEL __pgprot(_PAGE_RAM) +#define PAGE_KERNEL_NOCACHE __pgprot(_PAGE_IO) + +/* + * The PowerPC can only do execute protection on a segment (256MB) basis, + * not on a page basis. So we consider execute permission the same as read. + * Also, write permissions imply read permissions. + * This is the closest we can get.. + */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY_X +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY_X +#define __P100 PAGE_READONLY +#define __P101 PAGE_READONLY_X +#define __P110 PAGE_COPY +#define __P111 PAGE_COPY_X + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY_X +#define __S010 PAGE_SHARED +#define __S011 PAGE_SHARED_X +#define __S100 PAGE_READONLY +#define __S101 PAGE_READONLY_X +#define __S110 PAGE_SHARED +#define __S111 PAGE_SHARED_X + +#ifndef __ASSEMBLY__ +/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a + * kernel without large page PMD support */ +extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); + +/* + * Conversions between PTE values and page frame numbers. + */ + +/* in some case we want to additionaly adjust where the pfn is in the pte to + * allow room for more flags */ +#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT) +#define PFN_SHIFT_OFFSET (PAGE_SHIFT + 8) +#else +#define PFN_SHIFT_OFFSET (PAGE_SHIFT) +#endif + +#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET) +#define pte_page(x) pfn_to_page(pte_pfn(x)) + +#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\ + pgprot_val(prot)) +#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot) +#endif /* __ASSEMBLY__ */ + +#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0) +#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) +#define pte_clear(mm,addr,ptep) do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0) + +#define pmd_none(pmd) (!pmd_val(pmd)) +#define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD) +#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK) +#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0) + +#ifndef __ASSEMBLY__ +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; } +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } +static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } +static inline int pte_special(pte_t pte) { return 0; } + +static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; } +static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; } + +static inline pte_t pte_wrprotect(pte_t pte) { + pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; } +static inline pte_t pte_mkclean(pte_t pte) { + pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; } +static inline pte_t pte_mkold(pte_t pte) { + pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } + +static inline pte_t pte_mkwrite(pte_t pte) { + pte_val(pte) |= _PAGE_RW; return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { + pte_val(pte) |= _PAGE_DIRTY; return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { + pte_val(pte) |= _PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkspecial(pte_t pte) { + return pte; } +static inline unsigned long pte_pgprot(pte_t pte) +{ + return __pgprot(pte_val(pte)) & PAGE_PROT_BITS; +} + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); + return pte; +} + +/* + * When flushing the tlb entry for a page, we also need to flush the hash + * table entry. flush_hash_pages is assembler (for speed) in hashtable.S. + */ +extern int flush_hash_pages(unsigned context, unsigned long va, + unsigned long pmdval, int count); + +/* Add an HPTE to the hash table */ +extern void add_hash_page(unsigned context, unsigned long va, + unsigned long pmdval); + +/* + * Atomic PTE updates. + * + * pte_update clears and sets bit atomically, and returns + * the old pte value. In the 64-bit PTE case we lock around the + * low PTE word since we expect ALL flag bits to be there + */ +#ifndef CONFIG_PTE_64BIT +static inline unsigned long pte_update(pte_t *p, + unsigned long clr, + unsigned long set) +{ +#ifdef PTE_ATOMIC_UPDATES + unsigned long old, tmp; + + __asm__ __volatile__("\ +1: lwarx %0,0,%3\n\ + andc %1,%0,%4\n\ + or %1,%1,%5\n" + PPC405_ERR77(0,%3) +" stwcx. %1,0,%3\n\ + bne- 1b" + : "=&r" (old), "=&r" (tmp), "=m" (*p) + : "r" (p), "r" (clr), "r" (set), "m" (*p) + : "cc" ); +#else /* PTE_ATOMIC_UPDATES */ + unsigned long old = pte_val(*p); + *p = __pte((old & ~clr) | set); +#endif /* !PTE_ATOMIC_UPDATES */ + +#ifdef CONFIG_44x + if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) + icache_44x_need_flush = 1; +#endif + return old; +} +#else /* CONFIG_PTE_64BIT */ +/* TODO: Change that to only modify the low word and move set_pte_at() + * out of line + */ +static inline unsigned long long pte_update(pte_t *p, + unsigned long clr, + unsigned long set) +{ +#ifdef PTE_ATOMIC_UPDATES + unsigned long long old; + unsigned long tmp; + + __asm__ __volatile__("\ +1: lwarx %L0,0,%4\n\ + lwzx %0,0,%3\n\ + andc %1,%L0,%5\n\ + or %1,%1,%6\n" + PPC405_ERR77(0,%3) +" stwcx. %1,0,%4\n\ + bne- 1b" + : "=&r" (old), "=&r" (tmp), "=m" (*p) + : "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p) + : "cc" ); +#else /* PTE_ATOMIC_UPDATES */ + unsigned long long old = pte_val(*p); + *p = __pte((old & ~(unsigned long long)clr) | set); +#endif /* !PTE_ATOMIC_UPDATES */ + +#ifdef CONFIG_44x + if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) + icache_44x_need_flush = 1; +#endif + return old; +} +#endif /* CONFIG_PTE_64BIT */ + +/* + * set_pte stores a linux PTE into the linux page table. + * On machines which use an MMU hash table we avoid changing the + * _PAGE_HASHPTE bit. + */ +static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ +#if _PAGE_HASHPTE != 0 + pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE); +#else + *ptep = pte; +#endif +} + +/* + * 2.6 calls this without flushing the TLB entry; this is wrong + * for our hash-based implementation, we fix that up here. + */ +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep) +{ + unsigned long old; + old = pte_update(ptep, _PAGE_ACCESSED, 0); +#if _PAGE_HASHPTE != 0 + if (old & _PAGE_HASHPTE) { + unsigned long ptephys = __pa(ptep) & PAGE_MASK; + flush_hash_pages(context, addr, ptephys, 1); + } +#endif + return (old & _PAGE_ACCESSED) != 0; +} +#define ptep_test_and_clear_young(__vma, __addr, __ptep) \ + __ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep) + +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0)); +} + +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0); +} +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + ptep_set_wrprotect(mm, addr, ptep); +} + + +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) +{ + unsigned long bits = pte_val(entry) & + (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW); + pte_update(ptep, 0, bits); +} + +#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ +({ \ + int __changed = !pte_same(*(__ptep), __entry); \ + if (__changed) { \ + __ptep_set_access_flags(__ptep, __entry, __dirty); \ + flush_tlb_page_nohash(__vma, __address); \ + } \ + __changed; \ +}) + +/* + * Macro to mark a page protection value as "uncacheable". + */ +#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED)) + +struct file; +extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot); +#define __HAVE_PHYS_MEM_ACCESS_PROT + +#define __HAVE_ARCH_PTE_SAME +#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0) + +/* + * Note that on Book E processors, the pmd contains the kernel virtual + * (lowmem) address of the pte page. The physical address is less useful + * because everything runs with translation enabled (even the TLB miss + * handler). On everything else the pmd contains the physical address + * of the pte page. -- paulus + */ +#ifndef CONFIG_BOOKE +#define pmd_page_vaddr(pmd) \ + ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) +#define pmd_page(pmd) \ + (mem_map + (pmd_val(pmd) >> PAGE_SHIFT)) +#else +#define pmd_page_vaddr(pmd) \ + ((unsigned long) (pmd_val(pmd) & PAGE_MASK)) +#define pmd_page(pmd) \ + pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT)) +#endif + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* to find an entry in a page-table-directory */ +#define pgd_index(address) ((address) >> PGDIR_SHIFT) +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) + +/* Find an entry in the third-level page table.. */ +#define pte_index(address) \ + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset_kernel(dir, addr) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr)) +#define pte_offset_map(dir, addr) \ + ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr)) +#define pte_offset_map_nested(dir, addr) \ + ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr)) + +#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0) +#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1) + +/* + * Encode and decode a swap entry. + * Note that the bits we use in a PTE for representing a swap entry + * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the + *_PAGE_HASHPTE bit (if used). -- paulus + */ +#define __swp_type(entry) ((entry).val & 0x1f) +#define __swp_offset(entry) ((entry).val >> 5) +#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 5) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 }) + +/* Encode and decode a nonlinear file mapping entry */ +#define PTE_FILE_MAX_BITS 29 +#define pte_to_pgoff(pte) (pte_val(pte) >> 3) +#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE }) + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, + pmd_t **pmdp); + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_PGTABLE_PPC32_H */ diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h new file mode 100644 index 000000000000..db0b8f3b8807 --- /dev/null +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -0,0 +1,468 @@ +#ifndef _ASM_POWERPC_PGTABLE_PPC64_H_ +#define _ASM_POWERPC_PGTABLE_PPC64_H_ +/* + * This file contains the functions and defines necessary to modify and use + * the ppc64 hashed page table. + */ + +#ifndef __ASSEMBLY__ +#include +#include +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_PPC_64K_PAGES +#include +#else +#include +#endif + +#define FIRST_USER_ADDRESS 0 + +/* + * Size of EA range mapped by our pagetables. + */ +#define PGTABLE_EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \ + PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT) +#define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE) + +#if TASK_SIZE_USER64 > PGTABLE_RANGE +#error TASK_SIZE_USER64 exceeds pagetable range +#endif + +#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT)) +#error TASK_SIZE_USER64 exceeds user VSID range +#endif + + +/* + * Define the address range of the vmalloc VM area. + */ +#define VMALLOC_START ASM_CONST(0xD000000000000000) +#define VMALLOC_SIZE (PGTABLE_RANGE >> 1) +#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE) + +/* + * Define the address ranges for MMIO and IO space : + * + * ISA_IO_BASE = VMALLOC_END, 64K reserved area + * PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces + * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE + */ +#define FULL_IO_SIZE 0x80000000ul +#define ISA_IO_BASE (VMALLOC_END) +#define ISA_IO_END (VMALLOC_END + 0x10000ul) +#define PHB_IO_BASE (ISA_IO_END) +#define PHB_IO_END (VMALLOC_END + FULL_IO_SIZE) +#define IOREMAP_BASE (PHB_IO_END) +#define IOREMAP_END (VMALLOC_START + PGTABLE_RANGE) + +/* + * Region IDs + */ +#define REGION_SHIFT 60UL +#define REGION_MASK (0xfUL << REGION_SHIFT) +#define REGION_ID(ea) (((unsigned long)(ea)) >> REGION_SHIFT) + +#define VMALLOC_REGION_ID (REGION_ID(VMALLOC_START)) +#define KERNEL_REGION_ID (REGION_ID(PAGE_OFFSET)) +#define VMEMMAP_REGION_ID (0xfUL) +#define USER_REGION_ID (0UL) + +/* + * Defines the address of the vmemap area, in its own region + */ +#define VMEMMAP_BASE (VMEMMAP_REGION_ID << REGION_SHIFT) +#define vmemmap ((struct page *)VMEMMAP_BASE) + + +/* + * Common bits in a linux-style PTE. These match the bits in the + * (hardware-defined) PowerPC PTE as closely as possible. Additional + * bits may be defined in pgtable-*.h + */ +#define _PAGE_PRESENT 0x0001 /* software: pte contains a translation */ +#define _PAGE_USER 0x0002 /* matches one of the PP bits */ +#define _PAGE_FILE 0x0002 /* (!present only) software: pte holds file offset */ +#define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */ +#define _PAGE_GUARDED 0x0008 +#define _PAGE_COHERENT 0x0010 /* M: enforce memory coherence (SMP systems) */ +#define _PAGE_NO_CACHE 0x0020 /* I: cache inhibit */ +#define _PAGE_WRITETHRU 0x0040 /* W: cache write-through */ +#define _PAGE_DIRTY 0x0080 /* C: page changed */ +#define _PAGE_ACCESSED 0x0100 /* R: page referenced */ +#define _PAGE_RW 0x0200 /* software: user write access allowed */ +#define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */ + +/* Strong Access Ordering */ +#define _PAGE_SAO (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT) + +#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT) + +#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY) + +/* __pgprot defined in arch/powerpc/incliude/asm/page.h */ +#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) + +#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER) +#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER | _PAGE_EXEC) +#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) +#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) +#define PAGE_KERNEL __pgprot(_PAGE_BASE | _PAGE_WRENABLE) +#define PAGE_KERNEL_CI __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_WRENABLE | _PAGE_NO_CACHE | _PAGE_GUARDED) +#define PAGE_KERNEL_EXEC __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_EXEC) + +#define PAGE_AGP __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE) +#define HAVE_PAGE_AGP + +#define PAGE_PROT_BITS __pgprot(_PAGE_GUARDED | _PAGE_COHERENT | \ + _PAGE_NO_CACHE | _PAGE_WRITETHRU | \ + _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \ + _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC) +/* PTEIDX nibble */ +#define _PTEIDX_SECONDARY 0x8 +#define _PTEIDX_GROUP_IX 0x7 + + +/* + * POWER4 and newer have per page execute protection, older chips can only + * do this on a segment (256MB) basis. + * + * Also, write permissions imply read permissions. + * This is the closest we can get.. + * + * Note due to the way vm flags are laid out, the bits are XWR + */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_READONLY_X +#define __P101 PAGE_READONLY_X +#define __P110 PAGE_COPY_X +#define __P111 PAGE_COPY_X + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_SHARED +#define __S011 PAGE_SHARED +#define __S100 PAGE_READONLY_X +#define __S101 PAGE_READONLY_X +#define __S110 PAGE_SHARED_X +#define __S111 PAGE_SHARED_X + +#ifdef CONFIG_HUGETLB_PAGE + +#define HAVE_ARCH_UNMAPPED_AREA +#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN + +#endif + +#ifndef __ASSEMBLY__ + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + * + * mk_pte takes a (struct page *) as input + */ +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) + +static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot) +{ + pte_t pte; + + + pte_val(pte) = (pfn << PTE_RPN_SHIFT) | pgprot_val(pgprot); + return pte; +} + +#define pte_modify(_pte, newprot) \ + (__pte((pte_val(_pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))) + +#define pte_none(pte) ((pte_val(pte) & ~_PAGE_HPTEFLAGS) == 0) +#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) + +/* pte_clear moved to later in this file */ + +#define pte_pfn(x) ((unsigned long)((pte_val(x)>>PTE_RPN_SHIFT))) +#define pte_page(x) pfn_to_page(pte_pfn(x)) + +#define PMD_BAD_BITS (PTE_TABLE_SIZE-1) +#define PUD_BAD_BITS (PMD_TABLE_SIZE-1) + +#define pmd_set(pmdp, pmdval) (pmd_val(*(pmdp)) = (pmdval)) +#define pmd_none(pmd) (!pmd_val(pmd)) +#define pmd_bad(pmd) (!is_kernel_addr(pmd_val(pmd)) \ + || (pmd_val(pmd) & PMD_BAD_BITS)) +#define pmd_present(pmd) (pmd_val(pmd) != 0) +#define pmd_clear(pmdp) (pmd_val(*(pmdp)) = 0) +#define pmd_page_vaddr(pmd) (pmd_val(pmd) & ~PMD_MASKED_BITS) +#define pmd_page(pmd) virt_to_page(pmd_page_vaddr(pmd)) + +#define pud_set(pudp, pudval) (pud_val(*(pudp)) = (pudval)) +#define pud_none(pud) (!pud_val(pud)) +#define pud_bad(pud) (!is_kernel_addr(pud_val(pud)) \ + || (pud_val(pud) & PUD_BAD_BITS)) +#define pud_present(pud) (pud_val(pud) != 0) +#define pud_clear(pudp) (pud_val(*(pudp)) = 0) +#define pud_page_vaddr(pud) (pud_val(pud) & ~PUD_MASKED_BITS) +#define pud_page(pud) virt_to_page(pud_page_vaddr(pud)) + +#define pgd_set(pgdp, pudp) ({pgd_val(*(pgdp)) = (unsigned long)(pudp);}) + +/* + * Find an entry in a page-table-directory. We combine the address region + * (the high order N bits) and the pgd portion of the address. + */ +/* to avoid overflow in free_pgtables we don't use PTRS_PER_PGD here */ +#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & 0x1ff) + +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) + +#define pmd_offset(pudp,addr) \ + (((pmd_t *) pud_page_vaddr(*(pudp))) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))) + +#define pte_offset_kernel(dir,addr) \ + (((pte_t *) pmd_page_vaddr(*(dir))) + (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))) + +#define pte_offset_map(dir,addr) pte_offset_kernel((dir), (addr)) +#define pte_offset_map_nested(dir,addr) pte_offset_kernel((dir), (addr)) +#define pte_unmap(pte) do { } while(0) +#define pte_unmap_nested(pte) do { } while(0) + +/* to find an entry in a kernel page-table-directory */ +/* This now only contains the vmalloc pages */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW;} +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY;} +static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;} +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;} +static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; } + +static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; } +static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; } + +static inline pte_t pte_wrprotect(pte_t pte) { + pte_val(pte) &= ~(_PAGE_RW); return pte; } +static inline pte_t pte_mkclean(pte_t pte) { + pte_val(pte) &= ~(_PAGE_DIRTY); return pte; } +static inline pte_t pte_mkold(pte_t pte) { + pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkwrite(pte_t pte) { + pte_val(pte) |= _PAGE_RW; return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { + pte_val(pte) |= _PAGE_DIRTY; return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { + pte_val(pte) |= _PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkhuge(pte_t pte) { + return pte; } +static inline pte_t pte_mkspecial(pte_t pte) { + pte_val(pte) |= _PAGE_SPECIAL; return pte; } +static inline unsigned long pte_pgprot(pte_t pte) +{ + return __pgprot(pte_val(pte)) & PAGE_PROT_BITS; +} + +/* Atomic PTE updates */ +static inline unsigned long pte_update(struct mm_struct *mm, + unsigned long addr, + pte_t *ptep, unsigned long clr, + int huge) +{ + unsigned long old, tmp; + + __asm__ __volatile__( + "1: ldarx %0,0,%3 # pte_update\n\ + andi. %1,%0,%6\n\ + bne- 1b \n\ + andc %1,%0,%4 \n\ + stdcx. %1,0,%3 \n\ + bne- 1b" + : "=&r" (old), "=&r" (tmp), "=m" (*ptep) + : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY) + : "cc" ); + + if (old & _PAGE_HASHPTE) + hpte_need_flush(mm, addr, ptep, old, huge); + return old; +} + +static inline int __ptep_test_and_clear_young(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + unsigned long old; + + if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0) + return 0; + old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0); + return (old & _PAGE_ACCESSED) != 0; +} +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +#define ptep_test_and_clear_young(__vma, __addr, __ptep) \ +({ \ + int __r; \ + __r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \ + __r; \ +}) + +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + unsigned long old; + + if ((pte_val(*ptep) & _PAGE_RW) == 0) + return; + old = pte_update(mm, addr, ptep, _PAGE_RW, 0); +} + +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + unsigned long old; + + if ((pte_val(*ptep) & _PAGE_RW) == 0) + return; + old = pte_update(mm, addr, ptep, _PAGE_RW, 1); +} + +/* + * We currently remove entries from the hashtable regardless of whether + * the entry was young or dirty. The generic routines only flush if the + * entry was young or dirty which is not good enough. + * + * We should be more intelligent about this but for the moment we override + * these functions and force a tlb flush unconditionally + */ +#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH +#define ptep_clear_flush_young(__vma, __address, __ptep) \ +({ \ + int __young = __ptep_test_and_clear_young((__vma)->vm_mm, __address, \ + __ptep); \ + __young; \ +}) + +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +static inline pte_t ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0); + return __pte(old); +} + +static inline void pte_clear(struct mm_struct *mm, unsigned long addr, + pte_t * ptep) +{ + pte_update(mm, addr, ptep, ~0UL, 0); +} + +/* + * set_pte stores a linux PTE into the linux page table. + */ +static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ + if (pte_present(*ptep)) + pte_clear(mm, addr, ptep); + pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); + *ptep = pte; +} + +/* Set the dirty and/or accessed bits atomically in a linux PTE, this + * function doesn't need to flush the hash entry + */ +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) +{ + unsigned long bits = pte_val(entry) & + (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC); + unsigned long old, tmp; + + __asm__ __volatile__( + "1: ldarx %0,0,%4\n\ + andi. %1,%0,%6\n\ + bne- 1b \n\ + or %0,%3,%0\n\ + stdcx. %0,0,%4\n\ + bne- 1b" + :"=&r" (old), "=&r" (tmp), "=m" (*ptep) + :"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY) + :"cc"); +} +#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ +({ \ + int __changed = !pte_same(*(__ptep), __entry); \ + if (__changed) { \ + __ptep_set_access_flags(__ptep, __entry, __dirty); \ + flush_tlb_page_nohash(__vma, __address); \ + } \ + __changed; \ +}) + +/* + * Macro to mark a page protection value as "uncacheable". + */ +#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED)) + +struct file; +extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot); +#define __HAVE_PHYS_MEM_ACCESS_PROT + +#define __HAVE_ARCH_PTE_SAME +#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0) + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pmd_ERROR(e) \ + printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +/* Encode and de-code a swap entry */ +#define __swp_type(entry) (((entry).val >> 1) & 0x3f) +#define __swp_offset(entry) ((entry).val >> 8) +#define __swp_entry(type, offset) ((swp_entry_t){((type)<< 1)|((offset)<<8)}) +#define __pte_to_swp_entry(pte) ((swp_entry_t){pte_val(pte) >> PTE_RPN_SHIFT}) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val << PTE_RPN_SHIFT }) +#define pte_to_pgoff(pte) (pte_val(pte) >> PTE_RPN_SHIFT) +#define pgoff_to_pte(off) ((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE}) +#define PTE_FILE_MAX_BITS (BITS_PER_LONG - PTE_RPN_SHIFT) + +void pgtable_cache_init(void); + +/* + * find_linux_pte returns the address of a linux pte for a given + * effective address and directory. If not found, it returns zero. + */static inline pte_t *find_linux_pte(pgd_t *pgdir, unsigned long ea) +{ + pgd_t *pg; + pud_t *pu; + pmd_t *pm; + pte_t *pt = NULL; + + pg = pgdir + pgd_index(ea); + if (!pgd_none(*pg)) { + pu = pud_offset(pg, ea); + if (!pud_none(*pu)) { + pm = pmd_offset(pu, ea); + if (pmd_present(*pm)) + pt = pte_offset_kernel(pm, ea); + } + } + return pt; +} + +pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address); + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */ diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h new file mode 100644 index 000000000000..dbb8ca172e44 --- /dev/null +++ b/arch/powerpc/include/asm/pgtable.h @@ -0,0 +1,57 @@ +#ifndef _ASM_POWERPC_PGTABLE_H +#define _ASM_POWERPC_PGTABLE_H +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +#include /* For TASK_SIZE */ +#include +#include +struct mm_struct; +#endif /* !__ASSEMBLY__ */ + +#if defined(CONFIG_PPC64) +# include +#else +# include +#endif + +#ifndef __ASSEMBLY__ +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern unsigned long empty_zero_page[]; +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) + +extern pgd_t swapper_pg_dir[]; + +extern void paging_init(void); + +/* + * kern_addr_valid is intended to indicate whether an address is a valid + * kernel address. Most 32-bit archs define it as always true (like this) + * but most 64-bit archs actually perform a test. What should we do here? + */ +#define kern_addr_valid(addr) (1) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +#include + + +/* + * This gets called at the end of handling a page fault, when + * the kernel has put a new PTE into the page table for the process. + * We use it to ensure coherency between the i-cache and d-cache + * for the page which has just been mapped in. + * On machines which use an MMU hash table, we use this to put a + * corresponding HPTE into the hash table ahead of time, instead of + * waiting for the inevitable extra hash-table miss exception. + */ +extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t); + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PGTABLE_H */ diff --git a/arch/powerpc/include/asm/phyp_dump.h b/arch/powerpc/include/asm/phyp_dump.h new file mode 100644 index 000000000000..fa74c6c3e106 --- /dev/null +++ b/arch/powerpc/include/asm/phyp_dump.h @@ -0,0 +1,47 @@ +/* + * Hypervisor-assisted dump + * + * Linas Vepstas, Manish Ahuja 2008 + * Copyright 2008 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _PPC64_PHYP_DUMP_H +#define _PPC64_PHYP_DUMP_H + +#ifdef CONFIG_PHYP_DUMP + +/* The RMR region will be saved for later dumping + * whenever the kernel crashes. Set this to 256MB. */ +#define PHYP_DUMP_RMR_START 0x0 +#define PHYP_DUMP_RMR_END (1UL<<28) + +struct phyp_dump { + /* Memory that is reserved during very early boot. */ + unsigned long init_reserve_start; + unsigned long init_reserve_size; + /* cmd line options during boot */ + unsigned long reserve_bootvar; + unsigned long phyp_dump_at_boot; + /* Check status during boot if dump supported, active & present*/ + unsigned long phyp_dump_configured; + unsigned long phyp_dump_is_active; + /* store cpu & hpte size */ + unsigned long cpu_state_size; + unsigned long hpte_region_size; + /* previous scratch area values */ + unsigned long reserved_scratch_addr; + unsigned long reserved_scratch_size; +}; + +extern struct phyp_dump *phyp_dump_info; + +int early_init_dt_scan_phyp_dump(unsigned long node, + const char *uname, int depth, void *data); + +#endif /* CONFIG_PHYP_DUMP */ +#endif /* _PPC64_PHYP_DUMP_H */ diff --git a/arch/powerpc/include/asm/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h new file mode 100644 index 000000000000..877c35a4356e --- /dev/null +++ b/arch/powerpc/include/asm/pmac_feature.h @@ -0,0 +1,405 @@ +/* + * Definition of platform feature hooks for PowerMacs + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Paul Mackerras & + * Ben. Herrenschmidt. + * + * + * Note: I removed media-bay details from the feature stuff, I believe it's + * not worth it, the media-bay driver can directly use the mac-io + * ASIC registers. + * + * Implementation note: Currently, none of these functions will block. + * However, they may internally protect themselves with a spinlock + * for way too long. Be prepared for at least some of these to block + * in the future. + * + * Unless specifically defined, the result code is assumed to be an + * error when negative, 0 is the default success result. Some functions + * may return additional positive result values. + * + * To keep implementation simple, all feature calls are assumed to have + * the prototype parameters (struct device_node* node, int value). + * When either is not used, pass 0. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_POWERPC_PMAC_FEATURE_H +#define __ASM_POWERPC_PMAC_FEATURE_H + +#include +#include + +/* + * Known Mac motherboard models + * + * Please, report any error here to benh@kernel.crashing.org, thanks ! + * + * Note that I don't fully maintain this list for Core99 & MacRISC2 + * and I'm considering removing all NewWorld entries from it and + * entirely rely on the model string. + */ + +/* PowerSurge are the first generation of PCI Pmacs. This include + * all of the Grand-Central based machines. We currently don't + * differenciate most of them. + */ +#define PMAC_TYPE_PSURGE 0x10 /* PowerSurge */ +#define PMAC_TYPE_ANS 0x11 /* Apple Network Server */ + +/* Here is the infamous serie of OHare based machines + */ +#define PMAC_TYPE_COMET 0x20 /* Beleived to be PowerBook 2400 */ +#define PMAC_TYPE_HOOPER 0x21 /* Beleived to be PowerBook 3400 */ +#define PMAC_TYPE_KANGA 0x22 /* PowerBook 3500 (first G3) */ +#define PMAC_TYPE_ALCHEMY 0x23 /* Alchemy motherboard base */ +#define PMAC_TYPE_GAZELLE 0x24 /* Spartacus, some 5xxx/6xxx */ +#define PMAC_TYPE_UNKNOWN_OHARE 0x2f /* Unknown, but OHare based */ + +/* Here are the Heathrow based machines + * FIXME: Differenciate wallstreet,mainstreet,wallstreetII + */ +#define PMAC_TYPE_GOSSAMER 0x30 /* Gossamer motherboard */ +#define PMAC_TYPE_SILK 0x31 /* Desktop PowerMac G3 */ +#define PMAC_TYPE_WALLSTREET 0x32 /* Wallstreet/Mainstreet PowerBook*/ +#define PMAC_TYPE_UNKNOWN_HEATHROW 0x3f /* Unknown but heathrow based */ + +/* Here are newworld machines based on Paddington (heathrow derivative) + */ +#define PMAC_TYPE_101_PBOOK 0x40 /* 101 PowerBook (aka Lombard) */ +#define PMAC_TYPE_ORIG_IMAC 0x41 /* First generation iMac */ +#define PMAC_TYPE_YOSEMITE 0x42 /* B&W G3 */ +#define PMAC_TYPE_YIKES 0x43 /* Yikes G4 (PCI graphics) */ +#define PMAC_TYPE_UNKNOWN_PADDINGTON 0x4f /* Unknown but paddington based */ + +/* Core99 machines based on UniNorth 1.0 and 1.5 + * + * Note: A single entry here may cover several actual models according + * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most + * FireWire based iMacs, etc...). Those machines are too similar to be + * distinguished here, when they need to be differencied, use the + * device-tree "model" or "compatible" property. + */ +#define PMAC_TYPE_ORIG_IBOOK 0x40 /* First iBook model (no firewire) */ +#define PMAC_TYPE_SAWTOOTH 0x41 /* Desktop G4s */ +#define PMAC_TYPE_FW_IMAC 0x42 /* FireWire iMacs (except Pangea based) */ +#define PMAC_TYPE_FW_IBOOK 0x43 /* FireWire iBooks (except iBook2) */ +#define PMAC_TYPE_CUBE 0x44 /* Cube PowerMac */ +#define PMAC_TYPE_QUICKSILVER 0x45 /* QuickSilver G4s */ +#define PMAC_TYPE_PISMO 0x46 /* Pismo PowerBook */ +#define PMAC_TYPE_TITANIUM 0x47 /* Titanium PowerBook */ +#define PMAC_TYPE_TITANIUM2 0x48 /* Titanium II PowerBook (no L3, M6) */ +#define PMAC_TYPE_TITANIUM3 0x49 /* Titanium III PowerBook (with L3 & M7) */ +#define PMAC_TYPE_TITANIUM4 0x50 /* Titanium IV PowerBook (with L3 & M9) */ +#define PMAC_TYPE_EMAC 0x50 /* eMac */ +#define PMAC_TYPE_UNKNOWN_CORE99 0x5f + +/* MacRisc2 with UniNorth 2.0 */ +#define PMAC_TYPE_RACKMAC 0x80 /* XServe */ +#define PMAC_TYPE_WINDTUNNEL 0x81 + +/* MacRISC2 machines based on the Pangea chipset + */ +#define PMAC_TYPE_PANGEA_IMAC 0x100 /* Flower Power iMac */ +#define PMAC_TYPE_IBOOK2 0x101 /* iBook2 (polycarbonate) */ +#define PMAC_TYPE_FLAT_PANEL_IMAC 0x102 /* Flat panel iMac */ +#define PMAC_TYPE_UNKNOWN_PANGEA 0x10f + +/* MacRISC2 machines based on the Intrepid chipset + */ +#define PMAC_TYPE_UNKNOWN_INTREPID 0x11f /* Generic */ + +/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore, + * but rather machine families + */ +#define PMAC_TYPE_POWERMAC_G5 0x150 /* U3 & U3H based */ +#define PMAC_TYPE_POWERMAC_G5_U3L 0x151 /* U3L based desktop */ +#define PMAC_TYPE_IMAC_G5 0x152 /* iMac G5 */ +#define PMAC_TYPE_XSERVE_G5 0x153 /* Xserve G5 */ +#define PMAC_TYPE_UNKNOWN_K2 0x19f /* Any other K2 based */ +#define PMAC_TYPE_UNKNOWN_SHASTA 0x19e /* Any other Shasta based */ + +/* + * Motherboard flags + */ + +#define PMAC_MB_CAN_SLEEP 0x00000001 +#define PMAC_MB_HAS_FW_POWER 0x00000002 +#define PMAC_MB_OLD_CORE99 0x00000004 +#define PMAC_MB_MOBILE 0x00000008 +#define PMAC_MB_MAY_SLEEP 0x00000010 + +/* + * Feature calls supported on pmac + * + */ + +/* + * Use this inline wrapper + */ +struct device_node; + +static inline long pmac_call_feature(int selector, struct device_node* node, + long param, long value) +{ + if (!ppc_md.feature_call || !machine_is(powermac)) + return -ENODEV; + return ppc_md.feature_call(selector, node, param, value); +} + +/* PMAC_FTR_SERIAL_ENABLE (struct device_node* node, int param, int value) + * enable/disable an SCC side. Pass the node corresponding to the + * channel side as a parameter. + * param is the type of port + * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled + * for use by xmon. + */ +#define PMAC_FTR_SCC_ENABLE PMAC_FTR_DEF(0) + #define PMAC_SCC_ASYNC 0 + #define PMAC_SCC_IRDA 1 + #define PMAC_SCC_I2S1 2 + #define PMAC_SCC_FLAG_XMON 0x00001000 + +/* PMAC_FTR_MODEM_ENABLE (struct device_node* node, 0, int value) + * enable/disable the internal modem. + */ +#define PMAC_FTR_MODEM_ENABLE PMAC_FTR_DEF(1) + +/* PMAC_FTR_SWIM3_ENABLE (struct device_node* node, 0,int value) + * enable/disable the swim3 (floppy) cell of a mac-io ASIC + */ +#define PMAC_FTR_SWIM3_ENABLE PMAC_FTR_DEF(2) + +/* PMAC_FTR_MESH_ENABLE (struct device_node* node, 0, int value) + * enable/disable the mesh (scsi) cell of a mac-io ASIC + */ +#define PMAC_FTR_MESH_ENABLE PMAC_FTR_DEF(3) + +/* PMAC_FTR_IDE_ENABLE (struct device_node* node, int busID, int value) + * enable/disable an IDE port of a mac-io ASIC + * pass the busID parameter + */ +#define PMAC_FTR_IDE_ENABLE PMAC_FTR_DEF(4) + +/* PMAC_FTR_IDE_RESET (struct device_node* node, int busID, int value) + * assert(1)/release(0) an IDE reset line (mac-io IDE only) + */ +#define PMAC_FTR_IDE_RESET PMAC_FTR_DEF(5) + +/* PMAC_FTR_BMAC_ENABLE (struct device_node* node, 0, int value) + * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive + * it's reset line + */ +#define PMAC_FTR_BMAC_ENABLE PMAC_FTR_DEF(6) + +/* PMAC_FTR_GMAC_ENABLE (struct device_node* node, 0, int value) + * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This + * control the cell's clock. + */ +#define PMAC_FTR_GMAC_ENABLE PMAC_FTR_DEF(7) + +/* PMAC_FTR_GMAC_PHY_RESET (struct device_node* node, 0, 0) + * Perform a HW reset of the PHY connected to a gmac controller. + * Pass the gmac device node, not the PHY node. + */ +#define PMAC_FTR_GMAC_PHY_RESET PMAC_FTR_DEF(8) + +/* PMAC_FTR_SOUND_CHIP_ENABLE (struct device_node* node, 0, int value) + * enable/disable the sound chip, whatever it is and provided it can + * acually be controlled + */ +#define PMAC_FTR_SOUND_CHIP_ENABLE PMAC_FTR_DEF(9) + +/* -- add various tweaks related to sound routing -- */ + +/* PMAC_FTR_AIRPORT_ENABLE (struct device_node* node, 0, int value) + * enable/disable the airport card + */ +#define PMAC_FTR_AIRPORT_ENABLE PMAC_FTR_DEF(10) + +/* PMAC_FTR_RESET_CPU (NULL, int cpu_nr, 0) + * toggle the reset line of a CPU on an uninorth-based SMP machine + */ +#define PMAC_FTR_RESET_CPU PMAC_FTR_DEF(11) + +/* PMAC_FTR_USB_ENABLE (struct device_node* node, 0, int value) + * enable/disable an USB cell, along with the power of the USB "pad" + * on keylargo based machines + */ +#define PMAC_FTR_USB_ENABLE PMAC_FTR_DEF(12) + +/* PMAC_FTR_1394_ENABLE (struct device_node* node, 0, int value) + * enable/disable the firewire cell of an uninorth ASIC. + */ +#define PMAC_FTR_1394_ENABLE PMAC_FTR_DEF(13) + +/* PMAC_FTR_1394_CABLE_POWER (struct device_node* node, 0, int value) + * enable/disable the firewire cable power supply of the uninorth + * firewire cell + */ +#define PMAC_FTR_1394_CABLE_POWER PMAC_FTR_DEF(14) + +/* PMAC_FTR_SLEEP_STATE (struct device_node* node, 0, int value) + * set the sleep state of the motherboard. + * + * Pass -1 as value to query for sleep capability + * Pass 1 to set IOs to sleep + * Pass 0 to set IOs to wake + */ +#define PMAC_FTR_SLEEP_STATE PMAC_FTR_DEF(15) + +/* PMAC_FTR_GET_MB_INFO (NULL, selector, 0) + * + * returns some motherboard infos. + * selector: 0 - model id + * 1 - model flags (capabilities) + * 2 - model name (cast to const char *) + */ +#define PMAC_FTR_GET_MB_INFO PMAC_FTR_DEF(16) +#define PMAC_MB_INFO_MODEL 0 +#define PMAC_MB_INFO_FLAGS 1 +#define PMAC_MB_INFO_NAME 2 + +/* PMAC_FTR_READ_GPIO (NULL, int index, 0) + * + * read a GPIO from a mac-io controller of type KeyLargo or Pangea. + * the value returned is a byte (positive), or a negative error code + */ +#define PMAC_FTR_READ_GPIO PMAC_FTR_DEF(17) + +/* PMAC_FTR_WRITE_GPIO (NULL, int index, int value) + * + * write a GPIO of a mac-io controller of type KeyLargo or Pangea. + */ +#define PMAC_FTR_WRITE_GPIO PMAC_FTR_DEF(18) + +/* PMAC_FTR_ENABLE_MPIC + * + * Enable the MPIC cell + */ +#define PMAC_FTR_ENABLE_MPIC PMAC_FTR_DEF(19) + +/* PMAC_FTR_AACK_DELAY_ENABLE (NULL, int enable, 0) + * + * Enable/disable the AACK delay on the northbridge for systems using DFS + */ +#define PMAC_FTR_AACK_DELAY_ENABLE PMAC_FTR_DEF(20) + +/* PMAC_FTR_DEVICE_CAN_WAKE + * + * Used by video drivers to inform system that they can actually perform + * wakeup from sleep + */ +#define PMAC_FTR_DEVICE_CAN_WAKE PMAC_FTR_DEF(22) + + +/* Don't use those directly, they are for the sake of pmac_setup.c */ +extern long pmac_do_feature_call(unsigned int selector, ...); +extern void pmac_feature_init(void); + +/* Video suspend tweak */ +extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data); +extern void pmac_call_early_video_resume(void); + +#define PMAC_FTR_DEF(x) ((0x6660000) | (x)) + +/* The AGP driver registers itself here */ +extern void pmac_register_agp_pm(struct pci_dev *bridge, + int (*suspend)(struct pci_dev *bridge), + int (*resume)(struct pci_dev *bridge)); + +/* Those are meant to be used by video drivers to deal with AGP + * suspend resume properly + */ +extern void pmac_suspend_agp_for_card(struct pci_dev *dev); +extern void pmac_resume_agp_for_card(struct pci_dev *dev); + +/* + * The part below is for use by macio_asic.c only, do not rely + * on the data structures or constants below in a normal driver + * + */ + +#define MAX_MACIO_CHIPS 2 + +enum { + macio_unknown = 0, + macio_grand_central, + macio_ohare, + macio_ohareII, + macio_heathrow, + macio_gatwick, + macio_paddington, + macio_keylargo, + macio_pangea, + macio_intrepid, + macio_keylargo2, + macio_shasta, +}; + +struct macio_chip +{ + struct device_node *of_node; + int type; + const char *name; + int rev; + volatile u32 __iomem *base; + unsigned long flags; + + /* For use by macio_asic PCI driver */ + struct macio_bus lbus; +}; + +extern struct macio_chip macio_chips[MAX_MACIO_CHIPS]; + +#define MACIO_FLAG_SCCA_ON 0x00000001 +#define MACIO_FLAG_SCCB_ON 0x00000002 +#define MACIO_FLAG_SCC_LOCKED 0x00000004 +#define MACIO_FLAG_AIRPORT_ON 0x00000010 +#define MACIO_FLAG_FW_SUPPORTED 0x00000020 + +extern struct macio_chip* macio_find(struct device_node* child, int type); + +#define MACIO_FCR32(macio, r) ((macio)->base + ((r) >> 2)) +#define MACIO_FCR8(macio, r) (((volatile u8 __iomem *)((macio)->base)) + (r)) + +#define MACIO_IN32(r) (in_le32(MACIO_FCR32(macio,r))) +#define MACIO_OUT32(r,v) (out_le32(MACIO_FCR32(macio,r), (v))) +#define MACIO_BIS(r,v) (MACIO_OUT32((r), MACIO_IN32(r) | (v))) +#define MACIO_BIC(r,v) (MACIO_OUT32((r), MACIO_IN32(r) & ~(v))) +#define MACIO_IN8(r) (in_8(MACIO_FCR8(macio,r))) +#define MACIO_OUT8(r,v) (out_8(MACIO_FCR8(macio,r), (v))) + +/* + * Those are exported by pmac feature for internal use by arch code + * only like the platform function callbacks, do not use directly in drivers + */ +extern spinlock_t feature_lock; +extern struct device_node *uninorth_node; +extern u32 __iomem *uninorth_base; + +/* + * Uninorth reg. access. Note that Uni-N regs are big endian + */ + +#define UN_REG(r) (uninorth_base + ((r) >> 2)) +#define UN_IN(r) (in_be32(UN_REG(r))) +#define UN_OUT(r,v) (out_be32(UN_REG(r), (v))) +#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v))) +#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v))) + +/* Uninorth variant: + * + * 0 = not uninorth + * 1 = U1.x or U2.x + * 3 = U3 + * 4 = U4 + */ +extern int pmac_get_uninorth_variant(void); + +#endif /* __ASM_POWERPC_PMAC_FEATURE_H */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/pmac_low_i2c.h b/arch/powerpc/include/asm/pmac_low_i2c.h new file mode 100644 index 000000000000..131011bd7e76 --- /dev/null +++ b/arch/powerpc/include/asm/pmac_low_i2c.h @@ -0,0 +1,107 @@ +/* + * include/asm-ppc/pmac_low_i2c.h + * + * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#ifndef __PMAC_LOW_I2C_H__ +#define __PMAC_LOW_I2C_H__ +#ifdef __KERNEL__ + +/* i2c mode (based on the platform functions format) */ +enum { + pmac_i2c_mode_dumb = 1, + pmac_i2c_mode_std = 2, + pmac_i2c_mode_stdsub = 3, + pmac_i2c_mode_combined = 4, +}; + +/* RW bit in address */ +enum { + pmac_i2c_read = 0x01, + pmac_i2c_write = 0x00 +}; + +/* i2c bus type */ +enum { + pmac_i2c_bus_keywest = 0, + pmac_i2c_bus_pmu = 1, + pmac_i2c_bus_smu = 2, +}; + +/* i2c bus features */ +enum { + /* can_largesub : supports >1 byte subaddresses (SMU only) */ + pmac_i2c_can_largesub = 0x00000001u, + + /* multibus : device node holds multiple busses, bus number is + * encoded in bits 0xff00 of "reg" of a given device + */ + pmac_i2c_multibus = 0x00000002u, +}; + +/* i2c busses in the system */ +struct pmac_i2c_bus; +struct i2c_adapter; + +/* Init, called early during boot */ +extern int pmac_i2c_init(void); + +/* Lookup an i2c bus for a device-node. The node can be either the bus + * node itself or a device below it. In the case of a multibus, the bus + * node itself is the controller node, else, it's a child of the controller + * node + */ +extern struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node); + +/* Get the address for an i2c device. This strips the bus number if + * necessary. The 7 bits address is returned 1 bit right shifted so that the + * direction can be directly ored in + */ +extern u8 pmac_i2c_get_dev_addr(struct device_node *device); + +/* Get infos about a bus */ +extern struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus); +extern struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus); +extern int pmac_i2c_get_type(struct pmac_i2c_bus *bus); +extern int pmac_i2c_get_flags(struct pmac_i2c_bus *bus); +extern int pmac_i2c_get_channel(struct pmac_i2c_bus *bus); + +/* i2c layer adapter attach/detach */ +extern void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus, + struct i2c_adapter *adapter); +extern void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus, + struct i2c_adapter *adapter); +extern struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus); +extern struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter); + +/* March a device or bus with an i2c adapter structure, to be used by drivers + * to match device-tree nodes with i2c adapters during adapter discovery + * callbacks + */ +extern int pmac_i2c_match_adapter(struct device_node *dev, + struct i2c_adapter *adapter); + + +/* (legacy) Locking functions exposed to i2c-keywest */ +extern int pmac_low_i2c_lock(struct device_node *np); +extern int pmac_low_i2c_unlock(struct device_node *np); + +/* Access functions for platform code */ +extern int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled); +extern void pmac_i2c_close(struct pmac_i2c_bus *bus); +extern int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode); +extern int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, + u32 subaddr, u8 *data, int len); + +/* Suspend/resume code called by via-pmu directly for now */ +extern void pmac_pfunc_i2c_suspend(void); +extern void pmac_pfunc_i2c_resume(void); + +#endif /* __KERNEL__ */ +#endif /* __PMAC_LOW_I2C_H__ */ diff --git a/arch/powerpc/include/asm/pmac_pfunc.h b/arch/powerpc/include/asm/pmac_pfunc.h new file mode 100644 index 000000000000..1330d6a58c57 --- /dev/null +++ b/arch/powerpc/include/asm/pmac_pfunc.h @@ -0,0 +1,252 @@ +#ifndef __PMAC_PFUNC_H__ +#define __PMAC_PFUNC_H__ + +#include +#include + +/* Flags in command lists */ +#define PMF_FLAGS_ON_INIT 0x80000000u +#define PMF_FLGAS_ON_TERM 0x40000000u +#define PMF_FLAGS_ON_SLEEP 0x20000000u +#define PMF_FLAGS_ON_WAKE 0x10000000u +#define PMF_FLAGS_ON_DEMAND 0x08000000u +#define PMF_FLAGS_INT_GEN 0x04000000u +#define PMF_FLAGS_HIGH_SPEED 0x02000000u +#define PMF_FLAGS_LOW_SPEED 0x01000000u +#define PMF_FLAGS_SIDE_EFFECTS 0x00800000u + +/* + * Arguments to a platform function call. + * + * NOTE: By convention, pointer arguments point to an u32 + */ +struct pmf_args { + union { + u32 v; + u32 *p; + } u[4]; + unsigned int count; +}; + +/* + * A driver capable of interpreting commands provides a handlers + * structure filled with whatever handlers are implemented by this + * driver. Non implemented handlers are left NULL. + * + * PMF_STD_ARGS are the same arguments that are passed to the parser + * and that gets passed back to the various handlers. + * + * Interpreting a given function always start with a begin() call which + * returns an instance data to be passed around subsequent calls, and + * ends with an end() call. This allows the low level driver to implement + * locking policy or per-function instance data. + * + * For interrupt capable functions, irq_enable() is called when a client + * registers, and irq_disable() is called when the last client unregisters + * Note that irq_enable & irq_disable are called within a semaphore held + * by the core, thus you should not try to register yourself to some other + * pmf interrupt during those calls. + */ + +#define PMF_STD_ARGS struct pmf_function *func, void *instdata, \ + struct pmf_args *args + +struct pmf_function; + +struct pmf_handlers { + void * (*begin)(struct pmf_function *func, struct pmf_args *args); + void (*end)(struct pmf_function *func, void *instdata); + + int (*irq_enable)(struct pmf_function *func); + int (*irq_disable)(struct pmf_function *func); + + int (*write_gpio)(PMF_STD_ARGS, u8 value, u8 mask); + int (*read_gpio)(PMF_STD_ARGS, u8 mask, int rshift, u8 xor); + + int (*write_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask); + int (*read_reg32)(PMF_STD_ARGS, u32 offset); + int (*write_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask); + int (*read_reg16)(PMF_STD_ARGS, u32 offset); + int (*write_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask); + int (*read_reg8)(PMF_STD_ARGS, u32 offset); + + int (*delay)(PMF_STD_ARGS, u32 duration); + + int (*wait_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask); + int (*wait_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask); + int (*wait_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask); + + int (*read_i2c)(PMF_STD_ARGS, u32 len); + int (*write_i2c)(PMF_STD_ARGS, u32 len, const u8 *data); + int (*rmw_i2c)(PMF_STD_ARGS, u32 masklen, u32 valuelen, u32 totallen, + const u8 *maskdata, const u8 *valuedata); + + int (*read_cfg)(PMF_STD_ARGS, u32 offset, u32 len); + int (*write_cfg)(PMF_STD_ARGS, u32 offset, u32 len, const u8 *data); + int (*rmw_cfg)(PMF_STD_ARGS, u32 offset, u32 masklen, u32 valuelen, + u32 totallen, const u8 *maskdata, const u8 *valuedata); + + int (*read_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len); + int (*write_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len, const u8 *data); + int (*set_i2c_mode)(PMF_STD_ARGS, int mode); + int (*rmw_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 masklen, u32 valuelen, + u32 totallen, const u8 *maskdata, + const u8 *valuedata); + + int (*read_reg32_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, + u32 xor); + int (*read_reg16_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, + u32 xor); + int (*read_reg8_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, + u32 xor); + + int (*write_reg32_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); + int (*write_reg16_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); + int (*write_reg8_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); + + int (*mask_and_compare)(PMF_STD_ARGS, u32 len, const u8 *maskdata, + const u8 *valuedata); + + struct module *owner; +}; + + +/* + * Drivers who expose platform functions register at init time, this + * causes the platform functions for that device node to be parsed in + * advance and associated with the device. The data structures are + * partially public so a driver can walk the list of platform functions + * and eventually inspect the flags + */ +struct pmf_device; + +struct pmf_function { + /* All functions for a given driver are linked */ + struct list_head link; + + /* Function node & driver data */ + struct device_node *node; + void *driver_data; + + /* For internal use by core */ + struct pmf_device *dev; + + /* The name is the "xxx" in "platform-do-xxx", this is how + * platform functions are identified by this code. Some functions + * only operate for a given target, in which case the phandle is + * here (or 0 if the filter doesn't apply) + */ + const char *name; + u32 phandle; + + /* The flags for that function. You can have several functions + * with the same name and different flag + */ + u32 flags; + + /* The actual tokenized function blob */ + const void *data; + unsigned int length; + + /* Interrupt clients */ + struct list_head irq_clients; + + /* Refcounting */ + struct kref ref; +}; + +/* + * For platform functions that are interrupts, one can register + * irq_client structures. You canNOT use the same structure twice + * as it contains a link member. Also, the callback is called with + * a spinlock held, you must not call back into any of the pmf_* functions + * from within that callback + */ +struct pmf_irq_client { + void (*handler)(void *data); + void *data; + struct module *owner; + struct list_head link; + struct pmf_function *func; +}; + + +/* + * Register/Unregister a function-capable driver and its handlers + */ +extern int pmf_register_driver(struct device_node *np, + struct pmf_handlers *handlers, + void *driverdata); + +extern void pmf_unregister_driver(struct device_node *np); + + +/* + * Register/Unregister interrupt clients + */ +extern int pmf_register_irq_client(struct device_node *np, + const char *name, + struct pmf_irq_client *client); + +extern void pmf_unregister_irq_client(struct pmf_irq_client *client); + +/* + * Called by the handlers when an irq happens + */ +extern void pmf_do_irq(struct pmf_function *func); + + +/* + * Low level call to platform functions. + * + * The phandle can filter on the target object for functions that have + * multiple targets, the flags allow you to restrict the call to a given + * combination of flags. + * + * The args array contains as many arguments as is required by the function, + * this is dependent on the function you are calling, unfortunately Apple + * mechanism provides no way to encode that so you have to get it right at + * the call site. Some functions require no args, in which case, you can + * pass NULL. + * + * You can also pass NULL to the name. This will match any function that has + * the appropriate combination of flags & phandle or you can pass 0 to the + * phandle to match any + */ +extern int pmf_do_functions(struct device_node *np, const char *name, + u32 phandle, u32 flags, struct pmf_args *args); + + + +/* + * High level call to a platform function. + * + * This one looks for the platform-xxx first so you should call it to the + * actual target if any. It will fallback to platform-do-xxx if it can't + * find one. It will also exclusively target functions that have + * the "OnDemand" flag. + */ + +extern int pmf_call_function(struct device_node *target, const char *name, + struct pmf_args *args); + + +/* + * For low latency interrupt usage, you can lookup for on-demand functions + * using the functions below + */ + +extern struct pmf_function *pmf_find_function(struct device_node *target, + const char *name); + +extern struct pmf_function * pmf_get_function(struct pmf_function *func); +extern void pmf_put_function(struct pmf_function *func); + +extern int pmf_call_one(struct pmf_function *func, struct pmf_args *args); + + +/* Suspend/resume code called by via-pmu directly for now */ +extern void pmac_pfunc_base_suspend(void); +extern void pmac_pfunc_base_resume(void); + +#endif /* __PMAC_PFUNC_H__ */ diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h new file mode 100644 index 000000000000..d6a616a1b3ea --- /dev/null +++ b/arch/powerpc/include/asm/pmc.h @@ -0,0 +1,37 @@ +/* + * pmc.h + * Copyright (C) 2004 David Gibson, IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _POWERPC_PMC_H +#define _POWERPC_PMC_H +#ifdef __KERNEL__ + +#include + +typedef void (*perf_irq_t)(struct pt_regs *); +extern perf_irq_t perf_irq; + +int reserve_pmc_hardware(perf_irq_t new_perf_irq); +void release_pmc_hardware(void); + +#ifdef CONFIG_PPC64 +void power4_enable_pmcs(void); +void pasemi_enable_pmcs(void); +#endif + +#endif /* __KERNEL__ */ +#endif /* _POWERPC_PMC_H */ diff --git a/arch/powerpc/include/asm/pmi.h b/arch/powerpc/include/asm/pmi.h new file mode 100644 index 000000000000..b4e91fbf5081 --- /dev/null +++ b/arch/powerpc/include/asm/pmi.h @@ -0,0 +1,66 @@ +#ifndef _POWERPC_PMI_H +#define _POWERPC_PMI_H + +/* + * Definitions for talking with PMI device on PowerPC + * + * PMI (Platform Management Interrupt) is a way to communicate + * with the BMC (Baseboard Management Controller) via interrupts. + * Unlike IPMI it is bidirectional and has a low latency. + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Christian Krafft + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifdef __KERNEL__ + +#define PMI_TYPE_FREQ_CHANGE 0x01 +#define PMI_TYPE_POWER_BUTTON 0x02 +#define PMI_READ_TYPE 0 +#define PMI_READ_DATA0 1 +#define PMI_READ_DATA1 2 +#define PMI_READ_DATA2 3 +#define PMI_WRITE_TYPE 4 +#define PMI_WRITE_DATA0 5 +#define PMI_WRITE_DATA1 6 +#define PMI_WRITE_DATA2 7 + +#define PMI_ACK 0x80 + +#define PMI_TIMEOUT 100 + +typedef struct { + u8 type; + u8 data0; + u8 data1; + u8 data2; +} pmi_message_t; + +struct pmi_handler { + struct list_head node; + u8 type; + void (*handle_pmi_message) (pmi_message_t); +}; + +int pmi_register_handler(struct pmi_handler *); +void pmi_unregister_handler(struct pmi_handler *); + +int pmi_send_message(pmi_message_t); + +#endif /* __KERNEL__ */ +#endif /* _POWERPC_PMI_H */ diff --git a/arch/powerpc/include/asm/poll.h b/arch/powerpc/include/asm/poll.h new file mode 100644 index 000000000000..c98509d3149e --- /dev/null +++ b/arch/powerpc/include/asm/poll.h @@ -0,0 +1 @@ +#include diff --git a/arch/powerpc/include/asm/posix_types.h b/arch/powerpc/include/asm/posix_types.h new file mode 100644 index 000000000000..c4e396b540df --- /dev/null +++ b/arch/powerpc/include/asm/posix_types.h @@ -0,0 +1,128 @@ +#ifndef _ASM_POWERPC_POSIX_TYPES_H +#define _ASM_POWERPC_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned int __kernel_mode_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +typedef long __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef long __kernel_suseconds_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; +typedef unsigned int __kernel_old_uid_t; +typedef unsigned int __kernel_old_gid_t; + +#ifdef __powerpc64__ +typedef unsigned long __kernel_nlink_t; +typedef int __kernel_ipc_pid_t; +typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; +typedef unsigned long __kernel_old_dev_t; +#else +typedef unsigned short __kernel_nlink_t; +typedef short __kernel_ipc_pid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef unsigned int __kernel_old_dev_t; +#endif + +#ifdef __powerpc64__ +typedef long long __kernel_loff_t; +#else +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#ifndef __GNUC__ + +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) +#define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0) +#define __FD_ZERO(set) \ + ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set))) + +#else /* __GNUC__ */ + +#if defined(__KERNEL__) +/* With GNU C, use inline functions instead so args are evaluated only once: */ + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] |= (1UL<<_rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); +} + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *p) +{ + unsigned long *tmp = (unsigned long *)p->fds_bits; + int i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0; + tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0; + + case 8: + tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; + + case 4: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + return; + } + } + i = __FDSET_LONGS; + while (i) { + i--; + *tmp = 0; + tmp++; + } +} + +#endif /* defined(__KERNEL__) */ +#endif /* __GNUC__ */ +#endif /* _ASM_POWERPC_POSIX_TYPES_H */ diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h new file mode 100644 index 000000000000..854ab713f56c --- /dev/null +++ b/arch/powerpc/include/asm/ppc-pci.h @@ -0,0 +1,149 @@ +/* + * c 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_POWERPC_PPC_PCI_H +#define _ASM_POWERPC_PPC_PCI_H +#ifdef __KERNEL__ + +#ifdef CONFIG_PCI + +#include +#include + +extern unsigned long isa_io_base; + +extern void pci_setup_phb_io(struct pci_controller *hose, int primary); +extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary); + + +extern struct list_head hose_list; + +extern void find_and_init_phbs(void); + +extern struct pci_dev *isa_bridge_pcidev; /* may be NULL if no ISA bus */ + +/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */ +#define BUID_HI(buid) ((buid) >> 32) +#define BUID_LO(buid) ((buid) & 0xffffffff) + +/* PCI device_node operations */ +struct device_node; +typedef void *(*traverse_func)(struct device_node *me, void *data); +void *traverse_pci_devices(struct device_node *start, traverse_func pre, + void *data); + +extern void pci_devs_phb_init(void); +extern void pci_devs_phb_init_dynamic(struct pci_controller *phb); +extern void scan_phb(struct pci_controller *hose); + +/* From rtas_pci.h */ +extern void init_pci_config_tokens (void); +extern unsigned long get_phb_buid (struct device_node *); +extern int rtas_setup_phb(struct pci_controller *phb); + +extern unsigned long pci_probe_only; + +/* ---- EEH internal-use-only related routines ---- */ +#ifdef CONFIG_EEH + +void pci_addr_cache_insert_device(struct pci_dev *dev); +void pci_addr_cache_remove_device(struct pci_dev *dev); +void pci_addr_cache_build(void); +struct pci_dev *pci_get_device_by_addr(unsigned long addr); + +/** + * eeh_slot_error_detail -- record and EEH error condition to the log + * @pdn: pci device node + * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE + * + * Obtains the EEH error details from the RTAS subsystem, + * and then logs these details with the RTAS error log system. + */ +#define EEH_LOG_TEMP_FAILURE 1 +#define EEH_LOG_PERM_FAILURE 2 +void eeh_slot_error_detail (struct pci_dn *pdn, int severity); + +/** + * rtas_pci_enable - enable IO transfers for this slot + * @pdn: pci device node + * @function: either EEH_THAW_MMIO or EEH_THAW_DMA + * + * Enable I/O transfers to this slot + */ +#define EEH_THAW_MMIO 2 +#define EEH_THAW_DMA 3 +int rtas_pci_enable(struct pci_dn *pdn, int function); + +/** + * rtas_set_slot_reset -- unfreeze a frozen slot + * @pdn: pci device node + * + * Clear the EEH-frozen condition on a slot. This routine + * does this by asserting the PCI #RST line for 1/8th of + * a second; this routine will sleep while the adapter is + * being reset. + * + * Returns a non-zero value if the reset failed. + */ +int rtas_set_slot_reset (struct pci_dn *); +int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs); + +/** + * eeh_restore_bars - Restore device configuration info. + * @pdn: pci device node + * + * A reset of a PCI device will clear out its config space. + * This routines will restore the config space for this + * device, and is children, to values previously obtained + * from the firmware. + */ +void eeh_restore_bars(struct pci_dn *); + +/** + * rtas_configure_bridge -- firmware initialization of pci bridge + * @pdn: pci device node + * + * Ask the firmware to configure all PCI bridges devices + * located behind the indicated node. Required after a + * pci device reset. Does essentially the same hing as + * eeh_restore_bars, but for brdges, and lets firmware + * do the work. + */ +void rtas_configure_bridge(struct pci_dn *); + +int rtas_write_config(struct pci_dn *, int where, int size, u32 val); +int rtas_read_config(struct pci_dn *, int where, int size, u32 *val); + +/** + * eeh_mark_slot -- set mode flags for pertition endpoint + * @pdn: pci device node + * + * mark and clear slots: find "partition endpoint" PE and set or + * clear the flags for each subnode of the PE. + */ +void eeh_mark_slot (struct device_node *dn, int mode_flag); +void eeh_clear_slot (struct device_node *dn, int mode_flag); + +/** + * find_device_pe -- Find the associated "Partiationable Endpoint" PE + * @pdn: pci device node + */ +struct device_node * find_device_pe(struct device_node *dn); + +void eeh_sysfs_add_device(struct pci_dev *pdev); +void eeh_sysfs_remove_device(struct pci_dev *pdev); + +#endif /* CONFIG_EEH */ + +#else /* CONFIG_PCI */ +static inline void find_and_init_phbs(void) { } +static inline void init_pci_config_tokens(void) { } +#endif /* !CONFIG_PCI */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PPC_PCI_H */ diff --git a/arch/powerpc/include/asm/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h new file mode 100644 index 000000000000..033039a80c42 --- /dev/null +++ b/arch/powerpc/include/asm/ppc4xx.h @@ -0,0 +1,18 @@ +/* + * PPC4xx Prototypes and definitions + * + * Copyright 2008 DENX Software Engineering, Stefan Roese + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_POWERPC_PPC4xx_H__ +#define __ASM_POWERPC_PPC4xx_H__ + +extern void ppc4xx_reset_system(char *cmd); + +#endif /* __ASM_POWERPC_PPC4xx_H__ */ diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h new file mode 100644 index 000000000000..0966899d974b --- /dev/null +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -0,0 +1,689 @@ +/* + * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan. + */ +#ifndef _ASM_POWERPC_PPC_ASM_H +#define _ASM_POWERPC_PPC_ASM_H + +#include +#include +#include + +#ifndef __ASSEMBLY__ +#error __FILE__ should only be used in assembler files +#else + +#define SZL (BITS_PER_LONG/8) + +/* + * Stuff for accurate CPU time accounting. + * These macros handle transitions between user and system state + * in exception entry and exit and accumulate time to the + * user_time and system_time fields in the paca. + */ + +#ifndef CONFIG_VIRT_CPU_ACCOUNTING +#define ACCOUNT_CPU_USER_ENTRY(ra, rb) +#define ACCOUNT_CPU_USER_EXIT(ra, rb) +#else +#define ACCOUNT_CPU_USER_ENTRY(ra, rb) \ + beq 2f; /* if from kernel mode */ \ +BEGIN_FTR_SECTION; \ + mfspr ra,SPRN_PURR; /* get processor util. reg */ \ +END_FTR_SECTION_IFSET(CPU_FTR_PURR); \ +BEGIN_FTR_SECTION; \ + MFTB(ra); /* or get TB if no PURR */ \ +END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ + ld rb,PACA_STARTPURR(r13); \ + std ra,PACA_STARTPURR(r13); \ + subf rb,rb,ra; /* subtract start value */ \ + ld ra,PACA_USER_TIME(r13); \ + add ra,ra,rb; /* add on to user time */ \ + std ra,PACA_USER_TIME(r13); \ +2: + +#define ACCOUNT_CPU_USER_EXIT(ra, rb) \ +BEGIN_FTR_SECTION; \ + mfspr ra,SPRN_PURR; /* get processor util. reg */ \ +END_FTR_SECTION_IFSET(CPU_FTR_PURR); \ +BEGIN_FTR_SECTION; \ + MFTB(ra); /* or get TB if no PURR */ \ +END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ + ld rb,PACA_STARTPURR(r13); \ + std ra,PACA_STARTPURR(r13); \ + subf rb,rb,ra; /* subtract start value */ \ + ld ra,PACA_SYSTEM_TIME(r13); \ + add ra,ra,rb; /* add on to user time */ \ + std ra,PACA_SYSTEM_TIME(r13); +#endif + +/* + * Macros for storing registers into and loading registers from + * exception frames. + */ +#ifdef __powerpc64__ +#define SAVE_GPR(n, base) std n,GPR0+8*(n)(base) +#define REST_GPR(n, base) ld n,GPR0+8*(n)(base) +#define SAVE_NVGPRS(base) SAVE_8GPRS(14, base); SAVE_10GPRS(22, base) +#define REST_NVGPRS(base) REST_8GPRS(14, base); REST_10GPRS(22, base) +#else +#define SAVE_GPR(n, base) stw n,GPR0+4*(n)(base) +#define REST_GPR(n, base) lwz n,GPR0+4*(n)(base) +#define SAVE_NVGPRS(base) SAVE_GPR(13, base); SAVE_8GPRS(14, base); \ + SAVE_10GPRS(22, base) +#define REST_NVGPRS(base) REST_GPR(13, base); REST_8GPRS(14, base); \ + REST_10GPRS(22, base) +#endif + +/* + * Define what the VSX XX1 form instructions will look like, then add + * the 128 bit load store instructions based on that. + */ +#define VSX_XX1(xs, ra, rb) (((xs) & 0x1f) << 21 | ((ra) << 16) | \ + ((rb) << 11) | (((xs) >> 5))) + +#define STXVD2X(xs, ra, rb) .long (0x7c000798 | VSX_XX1((xs), (ra), (rb))) +#define LXVD2X(xs, ra, rb) .long (0x7c000698 | VSX_XX1((xs), (ra), (rb))) + +#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base) +#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base) +#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base) +#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base) +#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base) +#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base) +#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base) +#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base) + +#define SAVE_FPR(n, base) stfd n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base) +#define SAVE_2FPRS(n, base) SAVE_FPR(n, base); SAVE_FPR(n+1, base) +#define SAVE_4FPRS(n, base) SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base) +#define SAVE_8FPRS(n, base) SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base) +#define SAVE_16FPRS(n, base) SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base) +#define SAVE_32FPRS(n, base) SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base) +#define REST_FPR(n, base) lfd n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base) +#define REST_2FPRS(n, base) REST_FPR(n, base); REST_FPR(n+1, base) +#define REST_4FPRS(n, base) REST_2FPRS(n, base); REST_2FPRS(n+2, base) +#define REST_8FPRS(n, base) REST_4FPRS(n, base); REST_4FPRS(n+4, base) +#define REST_16FPRS(n, base) REST_8FPRS(n, base); REST_8FPRS(n+8, base) +#define REST_32FPRS(n, base) REST_16FPRS(n, base); REST_16FPRS(n+16, base) + +#define SAVE_VR(n,b,base) li b,THREAD_VR0+(16*(n)); stvx n,b,base +#define SAVE_2VRS(n,b,base) SAVE_VR(n,b,base); SAVE_VR(n+1,b,base) +#define SAVE_4VRS(n,b,base) SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base) +#define SAVE_8VRS(n,b,base) SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base) +#define SAVE_16VRS(n,b,base) SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base) +#define SAVE_32VRS(n,b,base) SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base) +#define REST_VR(n,b,base) li b,THREAD_VR0+(16*(n)); lvx n,b,base +#define REST_2VRS(n,b,base) REST_VR(n,b,base); REST_VR(n+1,b,base) +#define REST_4VRS(n,b,base) REST_2VRS(n,b,base); REST_2VRS(n+2,b,base) +#define REST_8VRS(n,b,base) REST_4VRS(n,b,base); REST_4VRS(n+4,b,base) +#define REST_16VRS(n,b,base) REST_8VRS(n,b,base); REST_8VRS(n+8,b,base) +#define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base) + +/* Save the lower 32 VSRs in the thread VSR region */ +#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,b,base) +#define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base) +#define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base) +#define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base) +#define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base) +#define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base) +#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base) +#define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base) +#define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base) +#define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base) +#define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base) +#define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base) +/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */ +#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,b,base) +#define SAVE_2VSRSU(n,b,base) SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base) +#define SAVE_4VSRSU(n,b,base) SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base) +#define SAVE_8VSRSU(n,b,base) SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base) +#define SAVE_16VSRSU(n,b,base) SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base) +#define SAVE_32VSRSU(n,b,base) SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base) +#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base) +#define REST_2VSRSU(n,b,base) REST_VSRU(n,b,base); REST_VSRU(n+1,b,base) +#define REST_4VSRSU(n,b,base) REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base) +#define REST_8VSRSU(n,b,base) REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base) +#define REST_16VSRSU(n,b,base) REST_8VSRSU(n,b,base); REST_8VSRSU(n+8,b,base) +#define REST_32VSRSU(n,b,base) REST_16VSRSU(n,b,base); REST_16VSRSU(n+16,b,base) + +#define SAVE_EVR(n,s,base) evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base) +#define SAVE_2EVRS(n,s,base) SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base) +#define SAVE_4EVRS(n,s,base) SAVE_2EVRS(n,s,base); SAVE_2EVRS(n+2,s,base) +#define SAVE_8EVRS(n,s,base) SAVE_4EVRS(n,s,base); SAVE_4EVRS(n+4,s,base) +#define SAVE_16EVRS(n,s,base) SAVE_8EVRS(n,s,base); SAVE_8EVRS(n+8,s,base) +#define SAVE_32EVRS(n,s,base) SAVE_16EVRS(n,s,base); SAVE_16EVRS(n+16,s,base) +#define REST_EVR(n,s,base) lwz s,THREAD_EVR0+4*(n)(base); evmergelo n,s,n +#define REST_2EVRS(n,s,base) REST_EVR(n,s,base); REST_EVR(n+1,s,base) +#define REST_4EVRS(n,s,base) REST_2EVRS(n,s,base); REST_2EVRS(n+2,s,base) +#define REST_8EVRS(n,s,base) REST_4EVRS(n,s,base); REST_4EVRS(n+4,s,base) +#define REST_16EVRS(n,s,base) REST_8EVRS(n,s,base); REST_8EVRS(n+8,s,base) +#define REST_32EVRS(n,s,base) REST_16EVRS(n,s,base); REST_16EVRS(n+16,s,base) + +/* Macros to adjust thread priority for hardware multithreading */ +#define HMT_VERY_LOW or 31,31,31 # very low priority +#define HMT_LOW or 1,1,1 +#define HMT_MEDIUM_LOW or 6,6,6 # medium low priority +#define HMT_MEDIUM or 2,2,2 +#define HMT_MEDIUM_HIGH or 5,5,5 # medium high priority +#define HMT_HIGH or 3,3,3 + +/* handle instructions that older assemblers may not know */ +#define RFCI .long 0x4c000066 /* rfci instruction */ +#define RFDI .long 0x4c00004e /* rfdi instruction */ +#define RFMCI .long 0x4c00004c /* rfmci instruction */ + +#ifdef __KERNEL__ +#ifdef CONFIG_PPC64 + +#define XGLUE(a,b) a##b +#define GLUE(a,b) XGLUE(a,b) + +#define _GLOBAL(name) \ + .section ".text"; \ + .align 2 ; \ + .globl name; \ + .globl GLUE(.,name); \ + .section ".opd","aw"; \ +name: \ + .quad GLUE(.,name); \ + .quad .TOC.@tocbase; \ + .quad 0; \ + .previous; \ + .type GLUE(.,name),@function; \ +GLUE(.,name): + +#define _INIT_GLOBAL(name) \ + .section ".text.init.refok"; \ + .align 2 ; \ + .globl name; \ + .globl GLUE(.,name); \ + .section ".opd","aw"; \ +name: \ + .quad GLUE(.,name); \ + .quad .TOC.@tocbase; \ + .quad 0; \ + .previous; \ + .type GLUE(.,name),@function; \ +GLUE(.,name): + +#define _KPROBE(name) \ + .section ".kprobes.text","a"; \ + .align 2 ; \ + .globl name; \ + .globl GLUE(.,name); \ + .section ".opd","aw"; \ +name: \ + .quad GLUE(.,name); \ + .quad .TOC.@tocbase; \ + .quad 0; \ + .previous; \ + .type GLUE(.,name),@function; \ +GLUE(.,name): + +#define _STATIC(name) \ + .section ".text"; \ + .align 2 ; \ + .section ".opd","aw"; \ +name: \ + .quad GLUE(.,name); \ + .quad .TOC.@tocbase; \ + .quad 0; \ + .previous; \ + .type GLUE(.,name),@function; \ +GLUE(.,name): + +#define _INIT_STATIC(name) \ + .section ".text.init.refok"; \ + .align 2 ; \ + .section ".opd","aw"; \ +name: \ + .quad GLUE(.,name); \ + .quad .TOC.@tocbase; \ + .quad 0; \ + .previous; \ + .type GLUE(.,name),@function; \ +GLUE(.,name): + +#else /* 32-bit */ + +#define _ENTRY(n) \ + .globl n; \ +n: + +#define _GLOBAL(n) \ + .text; \ + .stabs __stringify(n:F-1),N_FUN,0,0,n;\ + .globl n; \ +n: + +#define _KPROBE(n) \ + .section ".kprobes.text","a"; \ + .globl n; \ +n: + +#endif + +/* + * LOAD_REG_IMMEDIATE(rn, expr) + * Loads the value of the constant expression 'expr' into register 'rn' + * using immediate instructions only. Use this when it's important not + * to reference other data (i.e. on ppc64 when the TOC pointer is not + * valid). + * + * LOAD_REG_ADDR(rn, name) + * Loads the address of label 'name' into register 'rn'. Use this when + * you don't particularly need immediate instructions only, but you need + * the whole address in one register (e.g. it's a structure address and + * you want to access various offsets within it). On ppc32 this is + * identical to LOAD_REG_IMMEDIATE. + * + * LOAD_REG_ADDRBASE(rn, name) + * ADDROFF(name) + * LOAD_REG_ADDRBASE loads part of the address of label 'name' into + * register 'rn'. ADDROFF(name) returns the remainder of the address as + * a constant expression. ADDROFF(name) is a signed expression < 16 bits + * in size, so is suitable for use directly as an offset in load and store + * instructions. Use this when loading/storing a single word or less as: + * LOAD_REG_ADDRBASE(rX, name) + * ld rY,ADDROFF(name)(rX) + */ +#ifdef __powerpc64__ +#define LOAD_REG_IMMEDIATE(reg,expr) \ + lis (reg),(expr)@highest; \ + ori (reg),(reg),(expr)@higher; \ + rldicr (reg),(reg),32,31; \ + oris (reg),(reg),(expr)@h; \ + ori (reg),(reg),(expr)@l; + +#define LOAD_REG_ADDR(reg,name) \ + ld (reg),name@got(r2) + +#define LOAD_REG_ADDRBASE(reg,name) LOAD_REG_ADDR(reg,name) +#define ADDROFF(name) 0 + +/* offsets for stack frame layout */ +#define LRSAVE 16 + +#else /* 32-bit */ + +#define LOAD_REG_IMMEDIATE(reg,expr) \ + lis (reg),(expr)@ha; \ + addi (reg),(reg),(expr)@l; + +#define LOAD_REG_ADDR(reg,name) LOAD_REG_IMMEDIATE(reg, name) + +#define LOAD_REG_ADDRBASE(reg, name) lis (reg),name@ha +#define ADDROFF(name) name@l + +/* offsets for stack frame layout */ +#define LRSAVE 4 + +#endif + +/* various errata or part fixups */ +#ifdef CONFIG_PPC601_SYNC_FIX +#define SYNC \ +BEGIN_FTR_SECTION \ + sync; \ + isync; \ +END_FTR_SECTION_IFSET(CPU_FTR_601) +#define SYNC_601 \ +BEGIN_FTR_SECTION \ + sync; \ +END_FTR_SECTION_IFSET(CPU_FTR_601) +#define ISYNC_601 \ +BEGIN_FTR_SECTION \ + isync; \ +END_FTR_SECTION_IFSET(CPU_FTR_601) +#else +#define SYNC +#define SYNC_601 +#define ISYNC_601 +#endif + +#ifdef CONFIG_PPC_CELL +#define MFTB(dest) \ +90: mftb dest; \ +BEGIN_FTR_SECTION_NESTED(96); \ + cmpwi dest,0; \ + beq- 90b; \ +END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96) +#else +#define MFTB(dest) mftb dest +#endif + +#ifndef CONFIG_SMP +#define TLBSYNC +#else /* CONFIG_SMP */ +/* tlbsync is not implemented on 601 */ +#define TLBSYNC \ +BEGIN_FTR_SECTION \ + tlbsync; \ + sync; \ +END_FTR_SECTION_IFCLR(CPU_FTR_601) +#endif + + +/* + * This instruction is not implemented on the PPC 603 or 601; however, on + * the 403GCX and 405GP tlbia IS defined and tlbie is not. + * All of these instructions exist in the 8xx, they have magical powers, + * and they must be used. + */ + +#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx) +#define tlbia \ + li r4,1024; \ + mtctr r4; \ + lis r4,KERNELBASE@h; \ +0: tlbie r4; \ + addi r4,r4,0x1000; \ + bdnz 0b +#endif + + +#ifdef CONFIG_IBM440EP_ERR42 +#define PPC440EP_ERR42 isync +#else +#define PPC440EP_ERR42 +#endif + + +#if defined(CONFIG_BOOKE) +#define toreal(rd) +#define fromreal(rd) + +/* + * We use addis to ensure compatibility with the "classic" ppc versions of + * these macros, which use rs = 0 to get the tophys offset in rd, rather than + * converting the address in r0, and so this version has to do that too + * (i.e. set register rd to 0 when rs == 0). + */ +#define tophys(rd,rs) \ + addis rd,rs,0 + +#define tovirt(rd,rs) \ + addis rd,rs,0 + +#elif defined(CONFIG_PPC64) +#define toreal(rd) /* we can access c000... in real mode */ +#define fromreal(rd) + +#define tophys(rd,rs) \ + clrldi rd,rs,2 + +#define tovirt(rd,rs) \ + rotldi rd,rs,16; \ + ori rd,rd,((KERNELBASE>>48)&0xFFFF);\ + rotldi rd,rd,48 +#else +/* + * On APUS (Amiga PowerPC cpu upgrade board), we don't know the + * physical base address of RAM at compile time. + */ +#define toreal(rd) tophys(rd,rd) +#define fromreal(rd) tovirt(rd,rd) + +#define tophys(rd,rs) \ +0: addis rd,rs,-KERNELBASE@h; \ + .section ".vtop_fixup","aw"; \ + .align 1; \ + .long 0b; \ + .previous + +#define tovirt(rd,rs) \ +0: addis rd,rs,KERNELBASE@h; \ + .section ".ptov_fixup","aw"; \ + .align 1; \ + .long 0b; \ + .previous +#endif + +#ifdef CONFIG_PPC64 +#define RFI rfid +#define MTMSRD(r) mtmsrd r + +#else +#define FIX_SRR1(ra, rb) +#ifndef CONFIG_40x +#define RFI rfi +#else +#define RFI rfi; b . /* Prevent prefetch past rfi */ +#endif +#define MTMSRD(r) mtmsr r +#define CLR_TOP32(r) +#endif + +#endif /* __KERNEL__ */ + +/* The boring bits... */ + +/* Condition Register Bit Fields */ + +#define cr0 0 +#define cr1 1 +#define cr2 2 +#define cr3 3 +#define cr4 4 +#define cr5 5 +#define cr6 6 +#define cr7 7 + + +/* General Purpose Registers (GPRs) */ + +#define r0 0 +#define r1 1 +#define r2 2 +#define r3 3 +#define r4 4 +#define r5 5 +#define r6 6 +#define r7 7 +#define r8 8 +#define r9 9 +#define r10 10 +#define r11 11 +#define r12 12 +#define r13 13 +#define r14 14 +#define r15 15 +#define r16 16 +#define r17 17 +#define r18 18 +#define r19 19 +#define r20 20 +#define r21 21 +#define r22 22 +#define r23 23 +#define r24 24 +#define r25 25 +#define r26 26 +#define r27 27 +#define r28 28 +#define r29 29 +#define r30 30 +#define r31 31 + + +/* Floating Point Registers (FPRs) */ + +#define fr0 0 +#define fr1 1 +#define fr2 2 +#define fr3 3 +#define fr4 4 +#define fr5 5 +#define fr6 6 +#define fr7 7 +#define fr8 8 +#define fr9 9 +#define fr10 10 +#define fr11 11 +#define fr12 12 +#define fr13 13 +#define fr14 14 +#define fr15 15 +#define fr16 16 +#define fr17 17 +#define fr18 18 +#define fr19 19 +#define fr20 20 +#define fr21 21 +#define fr22 22 +#define fr23 23 +#define fr24 24 +#define fr25 25 +#define fr26 26 +#define fr27 27 +#define fr28 28 +#define fr29 29 +#define fr30 30 +#define fr31 31 + +/* AltiVec Registers (VPRs) */ + +#define vr0 0 +#define vr1 1 +#define vr2 2 +#define vr3 3 +#define vr4 4 +#define vr5 5 +#define vr6 6 +#define vr7 7 +#define vr8 8 +#define vr9 9 +#define vr10 10 +#define vr11 11 +#define vr12 12 +#define vr13 13 +#define vr14 14 +#define vr15 15 +#define vr16 16 +#define vr17 17 +#define vr18 18 +#define vr19 19 +#define vr20 20 +#define vr21 21 +#define vr22 22 +#define vr23 23 +#define vr24 24 +#define vr25 25 +#define vr26 26 +#define vr27 27 +#define vr28 28 +#define vr29 29 +#define vr30 30 +#define vr31 31 + +/* VSX Registers (VSRs) */ + +#define vsr0 0 +#define vsr1 1 +#define vsr2 2 +#define vsr3 3 +#define vsr4 4 +#define vsr5 5 +#define vsr6 6 +#define vsr7 7 +#define vsr8 8 +#define vsr9 9 +#define vsr10 10 +#define vsr11 11 +#define vsr12 12 +#define vsr13 13 +#define vsr14 14 +#define vsr15 15 +#define vsr16 16 +#define vsr17 17 +#define vsr18 18 +#define vsr19 19 +#define vsr20 20 +#define vsr21 21 +#define vsr22 22 +#define vsr23 23 +#define vsr24 24 +#define vsr25 25 +#define vsr26 26 +#define vsr27 27 +#define vsr28 28 +#define vsr29 29 +#define vsr30 30 +#define vsr31 31 +#define vsr32 32 +#define vsr33 33 +#define vsr34 34 +#define vsr35 35 +#define vsr36 36 +#define vsr37 37 +#define vsr38 38 +#define vsr39 39 +#define vsr40 40 +#define vsr41 41 +#define vsr42 42 +#define vsr43 43 +#define vsr44 44 +#define vsr45 45 +#define vsr46 46 +#define vsr47 47 +#define vsr48 48 +#define vsr49 49 +#define vsr50 50 +#define vsr51 51 +#define vsr52 52 +#define vsr53 53 +#define vsr54 54 +#define vsr55 55 +#define vsr56 56 +#define vsr57 57 +#define vsr58 58 +#define vsr59 59 +#define vsr60 60 +#define vsr61 61 +#define vsr62 62 +#define vsr63 63 + +/* SPE Registers (EVPRs) */ + +#define evr0 0 +#define evr1 1 +#define evr2 2 +#define evr3 3 +#define evr4 4 +#define evr5 5 +#define evr6 6 +#define evr7 7 +#define evr8 8 +#define evr9 9 +#define evr10 10 +#define evr11 11 +#define evr12 12 +#define evr13 13 +#define evr14 14 +#define evr15 15 +#define evr16 16 +#define evr17 17 +#define evr18 18 +#define evr19 19 +#define evr20 20 +#define evr21 21 +#define evr22 22 +#define evr23 23 +#define evr24 24 +#define evr25 25 +#define evr26 26 +#define evr27 27 +#define evr28 28 +#define evr29 29 +#define evr30 30 +#define evr31 31 + +/* some stab codes */ +#define N_FUN 36 +#define N_RSYM 64 +#define N_SLINE 68 +#define N_SO 100 + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_PPC_ASM_H */ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h new file mode 100644 index 000000000000..101ed87f7d84 --- /dev/null +++ b/arch/powerpc/include/asm/processor.h @@ -0,0 +1,314 @@ +#ifndef _ASM_POWERPC_PROCESSOR_H +#define _ASM_POWERPC_PROCESSOR_H + +/* + * Copyright (C) 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +#ifdef CONFIG_VSX +#define TS_FPRWIDTH 2 +#else +#define TS_FPRWIDTH 1 +#endif + +#ifndef __ASSEMBLY__ +#include +#include +#include + +/* We do _not_ want to define new machine types at all, those must die + * in favor of using the device-tree + * -- BenH. + */ + +/* PREP sub-platform types see residual.h for these */ +#define _PREP_Motorola 0x01 /* motorola prep */ +#define _PREP_Firm 0x02 /* firmworks prep */ +#define _PREP_IBM 0x00 /* ibm prep */ +#define _PREP_Bull 0x03 /* bull prep */ + +/* CHRP sub-platform types. These are arbitrary */ +#define _CHRP_Motorola 0x04 /* motorola chrp, the cobra */ +#define _CHRP_IBM 0x05 /* IBM chrp, the longtrail and longtrail 2 */ +#define _CHRP_Pegasos 0x06 /* Genesi/bplan's Pegasos and Pegasos2 */ +#define _CHRP_briq 0x07 /* TotalImpact's briQ */ + +#if defined(__KERNEL__) && defined(CONFIG_PPC32) + +extern int _chrp_type; + +#ifdef CONFIG_PPC_PREP + +/* what kind of prep workstation we are */ +extern int _prep_type; + +#endif /* CONFIG_PPC_PREP */ + +#endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */ + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +/* Macros for adjusting thread priority (hardware multi-threading) */ +#define HMT_very_low() asm volatile("or 31,31,31 # very low priority") +#define HMT_low() asm volatile("or 1,1,1 # low priority") +#define HMT_medium_low() asm volatile("or 6,6,6 # medium low priority") +#define HMT_medium() asm volatile("or 2,2,2 # medium priority") +#define HMT_medium_high() asm volatile("or 5,5,5 # medium high priority") +#define HMT_high() asm volatile("or 3,3,3 # high priority") + +#ifdef __KERNEL__ + +extern int have_of; + +struct task_struct; +void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp); +void release_thread(struct task_struct *); + +/* Prepare to copy thread state - unlazy all lazy status */ +extern void prepare_to_copy(struct task_struct *tsk); + +/* Create a new kernel thread. */ +extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); + +/* Lazy FPU handling on uni-processor */ +extern struct task_struct *last_task_used_math; +extern struct task_struct *last_task_used_altivec; +extern struct task_struct *last_task_used_vsx; +extern struct task_struct *last_task_used_spe; + +#ifdef CONFIG_PPC32 + +#if CONFIG_TASK_SIZE > CONFIG_KERNEL_START +#error User TASK_SIZE overlaps with KERNEL_START address +#endif +#define TASK_SIZE (CONFIG_TASK_SIZE) + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3) +#endif + +#ifdef CONFIG_PPC64 +/* 64-bit user address space is 44-bits (16TB user VM) */ +#define TASK_SIZE_USER64 (0x0000100000000000UL) + +/* + * 32-bit user address space is 4GB - 1 page + * (this 1 page is needed so referencing of 0xFFFFFFFF generates EFAULT + */ +#define TASK_SIZE_USER32 (0x0000000100000000UL - (1*PAGE_SIZE)) + +#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \ + TASK_SIZE_USER32 : TASK_SIZE_USER64) +#define TASK_SIZE TASK_SIZE_OF(current) + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4)) +#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_USER64 / 4)) + +#define TASK_UNMAPPED_BASE ((test_thread_flag(TIF_32BIT)) ? \ + TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 ) +#endif + +#ifdef __KERNEL__ +#ifdef __powerpc64__ + +#define STACK_TOP_USER64 TASK_SIZE_USER64 +#define STACK_TOP_USER32 TASK_SIZE_USER32 + +#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \ + STACK_TOP_USER32 : STACK_TOP_USER64) + +#define STACK_TOP_MAX STACK_TOP_USER64 + +#else /* __powerpc64__ */ + +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP + +#endif /* __powerpc64__ */ +#endif /* __KERNEL__ */ + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define TS_FPROFFSET 0 +#define TS_VSRLOWOFFSET 1 +#define TS_FPR(i) fpr[i][TS_FPROFFSET] + +struct thread_struct { + unsigned long ksp; /* Kernel stack pointer */ + unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ + +#ifdef CONFIG_PPC64 + unsigned long ksp_vsid; +#endif + struct pt_regs *regs; /* Pointer to saved register state */ + mm_segment_t fs; /* for get_fs() validation */ +#ifdef CONFIG_PPC32 + void *pgdir; /* root of page-table tree */ +#endif +#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE) + unsigned long dbcr0; /* debug control register values */ + unsigned long dbcr1; +#endif + /* FP and VSX 0-31 register set */ + double fpr[32][TS_FPRWIDTH]; + struct { + + unsigned int pad; + unsigned int val; /* Floating point status */ + } fpscr; + int fpexc_mode; /* floating-point exception mode */ + unsigned int align_ctl; /* alignment handling control */ +#ifdef CONFIG_PPC64 + unsigned long start_tb; /* Start purr when proc switched in */ + unsigned long accum_tb; /* Total accumilated purr for process */ +#endif + unsigned long dabr; /* Data address breakpoint register */ +#ifdef CONFIG_ALTIVEC + /* Complete AltiVec register set */ + vector128 vr[32] __attribute__((aligned(16))); + /* AltiVec status */ + vector128 vscr __attribute__((aligned(16))); + unsigned long vrsave; + int used_vr; /* set if process has used altivec */ +#endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX + /* VSR status */ + int used_vsr; /* set if process has used altivec */ +#endif /* CONFIG_VSX */ +#ifdef CONFIG_SPE + unsigned long evr[32]; /* upper 32-bits of SPE regs */ + u64 acc; /* Accumulator */ + unsigned long spefscr; /* SPE & eFP status */ + int used_spe; /* set if process has used spe */ +#endif /* CONFIG_SPE */ +}; + +#define ARCH_MIN_TASKALIGN 16 + +#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack) +#define INIT_SP_LIMIT \ + (_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack) + + +#ifdef CONFIG_PPC32 +#define INIT_THREAD { \ + .ksp = INIT_SP, \ + .ksp_limit = INIT_SP_LIMIT, \ + .fs = KERNEL_DS, \ + .pgdir = swapper_pg_dir, \ + .fpexc_mode = MSR_FE0 | MSR_FE1, \ +} +#else +#define INIT_THREAD { \ + .ksp = INIT_SP, \ + .ksp_limit = INIT_SP_LIMIT, \ + .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ + .fs = KERNEL_DS, \ + .fpr = {{0}}, \ + .fpscr = { .val = 0, }, \ + .fpexc_mode = 0, \ +} +#endif + +/* + * Return saved PC of a blocked thread. For now, this is the "user" PC + */ +#define thread_saved_pc(tsk) \ + ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0) + +#define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.regs) + +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0) +#define KSTK_ESP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->gpr[1]: 0) + +/* Get/set floating-point exception mode */ +#define GET_FPEXC_CTL(tsk, adr) get_fpexc_mode((tsk), (adr)) +#define SET_FPEXC_CTL(tsk, val) set_fpexc_mode((tsk), (val)) + +extern int get_fpexc_mode(struct task_struct *tsk, unsigned long adr); +extern int set_fpexc_mode(struct task_struct *tsk, unsigned int val); + +#define GET_ENDIAN(tsk, adr) get_endian((tsk), (adr)) +#define SET_ENDIAN(tsk, val) set_endian((tsk), (val)) + +extern int get_endian(struct task_struct *tsk, unsigned long adr); +extern int set_endian(struct task_struct *tsk, unsigned int val); + +#define GET_UNALIGN_CTL(tsk, adr) get_unalign_ctl((tsk), (adr)) +#define SET_UNALIGN_CTL(tsk, val) set_unalign_ctl((tsk), (val)) + +extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr); +extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val); + +static inline unsigned int __unpack_fe01(unsigned long msr_bits) +{ + return ((msr_bits & MSR_FE0) >> 10) | ((msr_bits & MSR_FE1) >> 8); +} + +static inline unsigned long __pack_fe01(unsigned int fpmode) +{ + return ((fpmode << 10) & MSR_FE0) | ((fpmode << 8) & MSR_FE1); +} + +#ifdef CONFIG_PPC64 +#define cpu_relax() do { HMT_low(); HMT_medium(); barrier(); } while (0) +#else +#define cpu_relax() barrier() +#endif + +/* Check that a certain kernel stack pointer is valid in task_struct p */ +int validate_sp(unsigned long sp, struct task_struct *p, + unsigned long nbytes); + +/* + * Prefetch macros. + */ +#define ARCH_HAS_PREFETCH +#define ARCH_HAS_PREFETCHW +#define ARCH_HAS_SPINLOCK_PREFETCH + +static inline void prefetch(const void *x) +{ + if (unlikely(!x)) + return; + + __asm__ __volatile__ ("dcbt 0,%0" : : "r" (x)); +} + +static inline void prefetchw(const void *x) +{ + if (unlikely(!x)) + return; + + __asm__ __volatile__ ("dcbtst 0,%0" : : "r" (x)); +} + +#define spin_lock_prefetch(x) prefetchw(x) + +#ifdef CONFIG_PPC64 +#define HAVE_ARCH_PICK_MMAP_LAYOUT +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_POWERPC_PROCESSOR_H */ diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h new file mode 100644 index 000000000000..eb3bd2e1c7f6 --- /dev/null +++ b/arch/powerpc/include/asm/prom.h @@ -0,0 +1,356 @@ +#ifndef _POWERPC_PROM_H +#define _POWERPC_PROM_H +#ifdef __KERNEL__ + +/* + * Definitions for talking to the Open Firmware PROM on + * Power Macintosh computers. + * + * Copyright (C) 1996-2005 Paul Mackerras. + * + * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include + +#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1 +#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1 + +#define of_compat_cmp(s1, s2, l) strcasecmp((s1), (s2)) +#define of_prop_cmp(s1, s2) strcmp((s1), (s2)) +#define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) + +/* Definitions used by the flattened device tree */ +#define OF_DT_HEADER 0xd00dfeed /* marker */ +#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ +#define OF_DT_END_NODE 0x2 /* End node */ +#define OF_DT_PROP 0x3 /* Property: name off, size, + * content */ +#define OF_DT_NOP 0x4 /* nop */ +#define OF_DT_END 0x9 + +#define OF_DT_VERSION 0x10 + +/* + * This is what gets passed to the kernel by prom_init or kexec + * + * The dt struct contains the device tree structure, full pathes and + * property contents. The dt strings contain a separate block with just + * the strings for the property names, and is fully page aligned and + * self contained in a page, so that it can be kept around by the kernel, + * each property name appears only once in this page (cheap compression) + * + * the mem_rsvmap contains a map of reserved ranges of physical memory, + * passing it here instead of in the device-tree itself greatly simplifies + * the job of everybody. It's just a list of u64 pairs (base/size) that + * ends when size is 0 + */ +struct boot_param_header +{ + u32 magic; /* magic word OF_DT_HEADER */ + u32 totalsize; /* total size of DT block */ + u32 off_dt_struct; /* offset to structure */ + u32 off_dt_strings; /* offset to strings */ + u32 off_mem_rsvmap; /* offset to memory reserve map */ + u32 version; /* format version */ + u32 last_comp_version; /* last compatible version */ + /* version 2 fields below */ + u32 boot_cpuid_phys; /* Physical CPU id we're booting on */ + /* version 3 fields below */ + u32 dt_strings_size; /* size of the DT strings block */ + /* version 17 fields below */ + u32 dt_struct_size; /* size of the DT structure block */ +}; + + + +typedef u32 phandle; +typedef u32 ihandle; + +struct property { + char *name; + int length; + void *value; + struct property *next; +}; + +struct device_node { + const char *name; + const char *type; + phandle node; + phandle linux_phandle; + char *full_name; + + struct property *properties; + struct property *deadprops; /* removed properties */ + struct device_node *parent; + struct device_node *child; + struct device_node *sibling; + struct device_node *next; /* next device of same type */ + struct device_node *allnext; /* next in list of all nodes */ + struct proc_dir_entry *pde; /* this node's proc directory */ + struct kref kref; + unsigned long _flags; + void *data; +}; + +extern struct device_node *of_chosen; + +static inline int of_node_check_flag(struct device_node *n, unsigned long flag) +{ + return test_bit(flag, &n->_flags); +} + +static inline void of_node_set_flag(struct device_node *n, unsigned long flag) +{ + set_bit(flag, &n->_flags); +} + + +#define HAVE_ARCH_DEVTREE_FIXUPS + +static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de) +{ + dn->pde = de; +} + + +extern struct device_node *of_find_all_nodes(struct device_node *prev); +extern struct device_node *of_node_get(struct device_node *node); +extern void of_node_put(struct device_node *node); + +/* For scanning the flat device-tree at boot time */ +extern int __init of_scan_flat_dt(int (*it)(unsigned long node, + const char *uname, int depth, + void *data), + void *data); +extern void* __init of_get_flat_dt_prop(unsigned long node, const char *name, + unsigned long *size); +extern int __init of_flat_dt_is_compatible(unsigned long node, const char *name); +extern unsigned long __init of_get_flat_dt_root(void); + +/* For updating the device tree at runtime */ +extern void of_attach_node(struct device_node *); +extern void of_detach_node(struct device_node *); + +/* Other Prototypes */ +extern void finish_device_tree(void); +extern void unflatten_device_tree(void); +extern void early_init_devtree(void *); +extern int machine_is_compatible(const char *compat); +extern void print_properties(struct device_node *node); +extern int prom_n_intr_cells(struct device_node* np); +extern void prom_get_irq_senses(unsigned char *senses, int off, int max); +extern int prom_add_property(struct device_node* np, struct property* prop); +extern int prom_remove_property(struct device_node *np, struct property *prop); +extern int prom_update_property(struct device_node *np, + struct property *newprop, + struct property *oldprop); + +#ifdef CONFIG_PPC32 +/* + * PCI <-> OF matching functions + * (XXX should these be here?) + */ +struct pci_bus; +struct pci_dev; +extern int pci_device_from_OF_node(struct device_node *node, + u8* bus, u8* devfn); +extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int); +extern struct device_node* pci_device_to_OF_node(struct pci_dev *); +extern void pci_create_OF_bus_map(void); +#endif + +extern struct resource *request_OF_resource(struct device_node* node, + int index, const char* name_postfix); +extern int release_OF_resource(struct device_node* node, int index); + + +/* + * OF address retreival & translation + */ + + +/* Helper to read a big number; size is in cells (not bytes) */ +static inline u64 of_read_number(const u32 *cell, int size) +{ + u64 r = 0; + while (size--) + r = (r << 32) | *(cell++); + return r; +} + +/* Like of_read_number, but we want an unsigned long result */ +#ifdef CONFIG_PPC32 +static inline unsigned long of_read_ulong(const u32 *cell, int size) +{ + return cell[size-1]; +} +#else +#define of_read_ulong(cell, size) of_read_number(cell, size) +#endif + +/* Translate an OF address block into a CPU physical address + */ +extern u64 of_translate_address(struct device_node *np, const u32 *addr); + +/* Translate a DMA address from device space to CPU space */ +extern u64 of_translate_dma_address(struct device_node *dev, + const u32 *in_addr); + +/* Extract an address from a device, returns the region size and + * the address space flags too. The PCI version uses a BAR number + * instead of an absolute index + */ +extern const u32 *of_get_address(struct device_node *dev, int index, + u64 *size, unsigned int *flags); +#ifdef CONFIG_PCI +extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no, + u64 *size, unsigned int *flags); +#else +static inline const u32 *of_get_pci_address(struct device_node *dev, + int bar_no, u64 *size, unsigned int *flags) +{ + return NULL; +} +#endif /* CONFIG_PCI */ + +/* Get an address as a resource. Note that if your address is + * a PIO address, the conversion will fail if the physical address + * can't be internally converted to an IO token with + * pci_address_to_pio(), that is because it's either called to early + * or it can't be matched to any host bridge IO space + */ +extern int of_address_to_resource(struct device_node *dev, int index, + struct resource *r); +#ifdef CONFIG_PCI +extern int of_pci_address_to_resource(struct device_node *dev, int bar, + struct resource *r); +#else +static inline int of_pci_address_to_resource(struct device_node *dev, int bar, + struct resource *r) +{ + return -ENOSYS; +} +#endif /* CONFIG_PCI */ + +/* Parse the ibm,dma-window property of an OF node into the busno, phys and + * size parameters. + */ +void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, + unsigned long *busno, unsigned long *phys, unsigned long *size); + +extern void kdump_move_device_tree(void); + +/* CPU OF node matching */ +struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); + +/* Get the MAC address */ +extern const void *of_get_mac_address(struct device_node *np); + +/* + * OF interrupt mapping + */ + +/* This structure is returned when an interrupt is mapped. The controller + * field needs to be put() after use + */ + +#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */ + +struct of_irq { + struct device_node *controller; /* Interrupt controller node */ + u32 size; /* Specifier size */ + u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */ +}; + +/** + * of_irq_map_init - Initialize the irq remapper + * @flags: flags defining workarounds to enable + * + * Some machines have bugs in the device-tree which require certain workarounds + * to be applied. Call this before any interrupt mapping attempts to enable + * those workarounds. + */ +#define OF_IMAP_OLDWORLD_MAC 0x00000001 +#define OF_IMAP_NO_PHANDLE 0x00000002 + +extern void of_irq_map_init(unsigned int flags); + +/** + * of_irq_map_raw - Low level interrupt tree parsing + * @parent: the device interrupt parent + * @intspec: interrupt specifier ("interrupts" property of the device) + * @ointsize: size of the passed in interrupt specifier + * @addr: address specifier (start of "reg" property of the device) + * @out_irq: structure of_irq filled by this function + * + * Returns 0 on success and a negative number on error + * + * This function is a low-level interrupt tree walking function. It + * can be used to do a partial walk with synthetized reg and interrupts + * properties, for example when resolving PCI interrupts when no device + * node exist for the parent. + * + */ + +extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec, + u32 ointsize, const u32 *addr, + struct of_irq *out_irq); + + +/** + * of_irq_map_one - Resolve an interrupt for a device + * @device: the device whose interrupt is to be resolved + * @index: index of the interrupt to resolve + * @out_irq: structure of_irq filled by this function + * + * This function resolves an interrupt, walking the tree, for a given + * device-tree node. It's the high level pendant to of_irq_map_raw(). + * It also implements the workarounds for OldWolrd Macs. + */ +extern int of_irq_map_one(struct device_node *device, int index, + struct of_irq *out_irq); + +/** + * of_irq_map_pci - Resolve the interrupt for a PCI device + * @pdev: the device whose interrupt is to be resolved + * @out_irq: structure of_irq filled by this function + * + * This function resolves the PCI interrupt for a given PCI device. If a + * device-node exists for a given pci_dev, it will use normal OF tree + * walking. If not, it will implement standard swizzling and walk up the + * PCI tree until an device-node is found, at which point it will finish + * resolving using the OF tree walking. + */ +struct pci_dev; +extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); + +extern int of_irq_to_resource(struct device_node *dev, int index, + struct resource *r); + +/** + * of_iomap - Maps the memory mapped IO for a given device_node + * @device: the device whose io range will be mapped + * @index: index of the io range + * + * Returns a pointer to the mapped memory + */ +extern void __iomem *of_iomap(struct device_node *device, int index); + +/* + * NB: This is here while we transition from using asm/prom.h + * to linux/of.h + */ +#include + +#endif /* __KERNEL__ */ +#endif /* _POWERPC_PROM_H */ diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h new file mode 100644 index 000000000000..f9e34c493cbb --- /dev/null +++ b/arch/powerpc/include/asm/ps3.h @@ -0,0 +1,519 @@ +/* + * PS3 platform declarations. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if !defined(_ASM_POWERPC_PS3_H) +#define _ASM_POWERPC_PS3_H + +#include +#include +#include +#include "cell-pmu.h" + +union ps3_firmware_version { + u64 raw; + struct { + u16 pad; + u16 major; + u16 minor; + u16 rev; + }; +}; + +void ps3_get_firmware_version(union ps3_firmware_version *v); +int ps3_compare_firmware_version(u16 major, u16 minor, u16 rev); + +/* 'Other OS' area */ + +enum ps3_param_av_multi_out { + PS3_PARAM_AV_MULTI_OUT_NTSC = 0, + PS3_PARAM_AV_MULTI_OUT_PAL_RGB = 1, + PS3_PARAM_AV_MULTI_OUT_PAL_YCBCR = 2, + PS3_PARAM_AV_MULTI_OUT_SECAM = 3, +}; + +enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void); + +/* dma routines */ + +enum ps3_dma_page_size { + PS3_DMA_4K = 12U, + PS3_DMA_64K = 16U, + PS3_DMA_1M = 20U, + PS3_DMA_16M = 24U, +}; + +enum ps3_dma_region_type { + PS3_DMA_OTHER = 0, + PS3_DMA_INTERNAL = 2, +}; + +struct ps3_dma_region_ops; + +/** + * struct ps3_dma_region - A per device dma state variables structure + * @did: The HV device id. + * @page_size: The ioc pagesize. + * @region_type: The HV region type. + * @bus_addr: The 'translated' bus address of the region. + * @len: The length in bytes of the region. + * @offset: The offset from the start of memory of the region. + * @ioid: The IOID of the device who owns this region + * @chunk_list: Opaque variable used by the ioc page manager. + * @region_ops: struct ps3_dma_region_ops - dma region operations + */ + +struct ps3_dma_region { + struct ps3_system_bus_device *dev; + /* device variables */ + const struct ps3_dma_region_ops *region_ops; + unsigned char ioid; + enum ps3_dma_page_size page_size; + enum ps3_dma_region_type region_type; + unsigned long len; + unsigned long offset; + + /* driver variables (set by ps3_dma_region_create) */ + unsigned long bus_addr; + struct { + spinlock_t lock; + struct list_head head; + } chunk_list; +}; + +struct ps3_dma_region_ops { + int (*create)(struct ps3_dma_region *); + int (*free)(struct ps3_dma_region *); + int (*map)(struct ps3_dma_region *, + unsigned long virt_addr, + unsigned long len, + unsigned long *bus_addr, + u64 iopte_pp); + int (*unmap)(struct ps3_dma_region *, + unsigned long bus_addr, + unsigned long len); +}; +/** + * struct ps3_dma_region_init - Helper to initialize structure variables + * + * Helper to properly initialize variables prior to calling + * ps3_system_bus_device_register. + */ + +struct ps3_system_bus_device; + +int ps3_dma_region_init(struct ps3_system_bus_device *dev, + struct ps3_dma_region *r, enum ps3_dma_page_size page_size, + enum ps3_dma_region_type region_type, void *addr, unsigned long len); +int ps3_dma_region_create(struct ps3_dma_region *r); +int ps3_dma_region_free(struct ps3_dma_region *r); +int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr, + unsigned long len, unsigned long *bus_addr, + u64 iopte_pp); +int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr, + unsigned long len); + +/* mmio routines */ + +enum ps3_mmio_page_size { + PS3_MMIO_4K = 12U, + PS3_MMIO_64K = 16U +}; + +struct ps3_mmio_region_ops; +/** + * struct ps3_mmio_region - a per device mmio state variables structure + * + * Current systems can be supported with a single region per device. + */ + +struct ps3_mmio_region { + struct ps3_system_bus_device *dev; + const struct ps3_mmio_region_ops *mmio_ops; + unsigned long bus_addr; + unsigned long len; + enum ps3_mmio_page_size page_size; + unsigned long lpar_addr; +}; + +struct ps3_mmio_region_ops { + int (*create)(struct ps3_mmio_region *); + int (*free)(struct ps3_mmio_region *); +}; +/** + * struct ps3_mmio_region_init - Helper to initialize structure variables + * + * Helper to properly initialize variables prior to calling + * ps3_system_bus_device_register. + */ + +int ps3_mmio_region_init(struct ps3_system_bus_device *dev, + struct ps3_mmio_region *r, unsigned long bus_addr, unsigned long len, + enum ps3_mmio_page_size page_size); +int ps3_mmio_region_create(struct ps3_mmio_region *r); +int ps3_free_mmio_region(struct ps3_mmio_region *r); +unsigned long ps3_mm_phys_to_lpar(unsigned long phys_addr); + +/* inrerrupt routines */ + +enum ps3_cpu_binding { + PS3_BINDING_CPU_ANY = -1, + PS3_BINDING_CPU_0 = 0, + PS3_BINDING_CPU_1 = 1, +}; + +int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet, + unsigned int *virq); +int ps3_irq_plug_destroy(unsigned int virq); +int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq); +int ps3_event_receive_port_destroy(unsigned int virq); +int ps3_send_event_locally(unsigned int virq); + +int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id, + unsigned int *virq); +int ps3_io_irq_destroy(unsigned int virq); +int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp, + unsigned int *virq); +int ps3_vuart_irq_destroy(unsigned int virq); +int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id, + unsigned int class, unsigned int *virq); +int ps3_spe_irq_destroy(unsigned int virq); + +int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev, + enum ps3_cpu_binding cpu, unsigned int *virq); +int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev, + unsigned int virq); + +/* lv1 result codes */ + +enum lv1_result { + LV1_SUCCESS = 0, + /* not used -1 */ + LV1_RESOURCE_SHORTAGE = -2, + LV1_NO_PRIVILEGE = -3, + LV1_DENIED_BY_POLICY = -4, + LV1_ACCESS_VIOLATION = -5, + LV1_NO_ENTRY = -6, + LV1_DUPLICATE_ENTRY = -7, + LV1_TYPE_MISMATCH = -8, + LV1_BUSY = -9, + LV1_EMPTY = -10, + LV1_WRONG_STATE = -11, + /* not used -12 */ + LV1_NO_MATCH = -13, + LV1_ALREADY_CONNECTED = -14, + LV1_UNSUPPORTED_PARAMETER_VALUE = -15, + LV1_CONDITION_NOT_SATISFIED = -16, + LV1_ILLEGAL_PARAMETER_VALUE = -17, + LV1_BAD_OPTION = -18, + LV1_IMPLEMENTATION_LIMITATION = -19, + LV1_NOT_IMPLEMENTED = -20, + LV1_INVALID_CLASS_ID = -21, + LV1_CONSTRAINT_NOT_SATISFIED = -22, + LV1_ALIGNMENT_ERROR = -23, + LV1_HARDWARE_ERROR = -24, + LV1_INVALID_DATA_FORMAT = -25, + LV1_INVALID_OPERATION = -26, + LV1_INTERNAL_ERROR = -32768, +}; + +static inline const char* ps3_result(int result) +{ +#if defined(DEBUG) + switch (result) { + case LV1_SUCCESS: + return "LV1_SUCCESS (0)"; + case -1: + return "** unknown result ** (-1)"; + case LV1_RESOURCE_SHORTAGE: + return "LV1_RESOURCE_SHORTAGE (-2)"; + case LV1_NO_PRIVILEGE: + return "LV1_NO_PRIVILEGE (-3)"; + case LV1_DENIED_BY_POLICY: + return "LV1_DENIED_BY_POLICY (-4)"; + case LV1_ACCESS_VIOLATION: + return "LV1_ACCESS_VIOLATION (-5)"; + case LV1_NO_ENTRY: + return "LV1_NO_ENTRY (-6)"; + case LV1_DUPLICATE_ENTRY: + return "LV1_DUPLICATE_ENTRY (-7)"; + case LV1_TYPE_MISMATCH: + return "LV1_TYPE_MISMATCH (-8)"; + case LV1_BUSY: + return "LV1_BUSY (-9)"; + case LV1_EMPTY: + return "LV1_EMPTY (-10)"; + case LV1_WRONG_STATE: + return "LV1_WRONG_STATE (-11)"; + case -12: + return "** unknown result ** (-12)"; + case LV1_NO_MATCH: + return "LV1_NO_MATCH (-13)"; + case LV1_ALREADY_CONNECTED: + return "LV1_ALREADY_CONNECTED (-14)"; + case LV1_UNSUPPORTED_PARAMETER_VALUE: + return "LV1_UNSUPPORTED_PARAMETER_VALUE (-15)"; + case LV1_CONDITION_NOT_SATISFIED: + return "LV1_CONDITION_NOT_SATISFIED (-16)"; + case LV1_ILLEGAL_PARAMETER_VALUE: + return "LV1_ILLEGAL_PARAMETER_VALUE (-17)"; + case LV1_BAD_OPTION: + return "LV1_BAD_OPTION (-18)"; + case LV1_IMPLEMENTATION_LIMITATION: + return "LV1_IMPLEMENTATION_LIMITATION (-19)"; + case LV1_NOT_IMPLEMENTED: + return "LV1_NOT_IMPLEMENTED (-20)"; + case LV1_INVALID_CLASS_ID: + return "LV1_INVALID_CLASS_ID (-21)"; + case LV1_CONSTRAINT_NOT_SATISFIED: + return "LV1_CONSTRAINT_NOT_SATISFIED (-22)"; + case LV1_ALIGNMENT_ERROR: + return "LV1_ALIGNMENT_ERROR (-23)"; + case LV1_HARDWARE_ERROR: + return "LV1_HARDWARE_ERROR (-24)"; + case LV1_INVALID_DATA_FORMAT: + return "LV1_INVALID_DATA_FORMAT (-25)"; + case LV1_INVALID_OPERATION: + return "LV1_INVALID_OPERATION (-26)"; + case LV1_INTERNAL_ERROR: + return "LV1_INTERNAL_ERROR (-32768)"; + default: + BUG(); + return "** unknown result **"; + }; +#else + return ""; +#endif +} + +/* system bus routines */ + +enum ps3_match_id { + PS3_MATCH_ID_EHCI = 1, + PS3_MATCH_ID_OHCI = 2, + PS3_MATCH_ID_GELIC = 3, + PS3_MATCH_ID_AV_SETTINGS = 4, + PS3_MATCH_ID_SYSTEM_MANAGER = 5, + PS3_MATCH_ID_STOR_DISK = 6, + PS3_MATCH_ID_STOR_ROM = 7, + PS3_MATCH_ID_STOR_FLASH = 8, + PS3_MATCH_ID_SOUND = 9, + PS3_MATCH_ID_GRAPHICS = 10, + PS3_MATCH_ID_LPM = 11, +}; + +#define PS3_MODULE_ALIAS_EHCI "ps3:1" +#define PS3_MODULE_ALIAS_OHCI "ps3:2" +#define PS3_MODULE_ALIAS_GELIC "ps3:3" +#define PS3_MODULE_ALIAS_AV_SETTINGS "ps3:4" +#define PS3_MODULE_ALIAS_SYSTEM_MANAGER "ps3:5" +#define PS3_MODULE_ALIAS_STOR_DISK "ps3:6" +#define PS3_MODULE_ALIAS_STOR_ROM "ps3:7" +#define PS3_MODULE_ALIAS_STOR_FLASH "ps3:8" +#define PS3_MODULE_ALIAS_SOUND "ps3:9" +#define PS3_MODULE_ALIAS_GRAPHICS "ps3:10" +#define PS3_MODULE_ALIAS_LPM "ps3:11" + +enum ps3_system_bus_device_type { + PS3_DEVICE_TYPE_IOC0 = 1, + PS3_DEVICE_TYPE_SB, + PS3_DEVICE_TYPE_VUART, + PS3_DEVICE_TYPE_LPM, +}; + +enum ps3_match_sub_id { + /* for PS3_MATCH_ID_GRAPHICS */ + PS3_MATCH_SUB_ID_FB = 1, +}; + +/** + * struct ps3_system_bus_device - a device on the system bus + */ + +struct ps3_system_bus_device { + enum ps3_match_id match_id; + enum ps3_match_sub_id match_sub_id; + enum ps3_system_bus_device_type dev_type; + + u64 bus_id; /* SB */ + u64 dev_id; /* SB */ + unsigned int interrupt_id; /* SB */ + struct ps3_dma_region *d_region; /* SB, IOC0 */ + struct ps3_mmio_region *m_region; /* SB, IOC0*/ + unsigned int port_number; /* VUART */ + struct { /* LPM */ + u64 node_id; + u64 pu_id; + u64 rights; + } lpm; + +/* struct iommu_table *iommu_table; -- waiting for BenH's cleanups */ + struct device core; + void *driver_priv; /* private driver variables */ +}; + +int ps3_open_hv_device(struct ps3_system_bus_device *dev); +int ps3_close_hv_device(struct ps3_system_bus_device *dev); + +/** + * struct ps3_system_bus_driver - a driver for a device on the system bus + */ + +struct ps3_system_bus_driver { + enum ps3_match_id match_id; + enum ps3_match_sub_id match_sub_id; + struct device_driver core; + int (*probe)(struct ps3_system_bus_device *); + int (*remove)(struct ps3_system_bus_device *); + int (*shutdown)(struct ps3_system_bus_device *); +/* int (*suspend)(struct ps3_system_bus_device *, pm_message_t); */ +/* int (*resume)(struct ps3_system_bus_device *); */ +}; + +int ps3_system_bus_device_register(struct ps3_system_bus_device *dev); +int ps3_system_bus_driver_register(struct ps3_system_bus_driver *drv); +void ps3_system_bus_driver_unregister(struct ps3_system_bus_driver *drv); + +static inline struct ps3_system_bus_driver *ps3_drv_to_system_bus_drv( + struct device_driver *_drv) +{ + return container_of(_drv, struct ps3_system_bus_driver, core); +} +static inline struct ps3_system_bus_device *ps3_dev_to_system_bus_dev( + struct device *_dev) +{ + return container_of(_dev, struct ps3_system_bus_device, core); +} +static inline struct ps3_system_bus_driver * + ps3_system_bus_dev_to_system_bus_drv(struct ps3_system_bus_device *_dev) +{ + BUG_ON(!_dev); + BUG_ON(!_dev->core.driver); + return ps3_drv_to_system_bus_drv(_dev->core.driver); +} + +/** + * ps3_system_bus_set_drvdata - + * @dev: device structure + * @data: Data to set + */ + +static inline void ps3_system_bus_set_driver_data( + struct ps3_system_bus_device *dev, void *data) +{ + dev->core.driver_data = data; +} +static inline void *ps3_system_bus_get_driver_data( + struct ps3_system_bus_device *dev) +{ + return dev->core.driver_data; +} + +/* These two need global scope for get_dma_ops(). */ + +extern struct bus_type ps3_system_bus_type; + +/* system manager */ + +struct ps3_sys_manager_ops { + struct ps3_system_bus_device *dev; + void (*power_off)(struct ps3_system_bus_device *dev); + void (*restart)(struct ps3_system_bus_device *dev); +}; + +void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops); +void __noreturn ps3_sys_manager_power_off(void); +void __noreturn ps3_sys_manager_restart(void); +void __noreturn ps3_sys_manager_halt(void); +int ps3_sys_manager_get_wol(void); +void ps3_sys_manager_set_wol(int state); + +struct ps3_prealloc { + const char *name; + void *address; + unsigned long size; + unsigned long align; +}; + +extern struct ps3_prealloc ps3fb_videomemory; +extern struct ps3_prealloc ps3flash_bounce_buffer; + +/* logical performance monitor */ + +/** + * enum ps3_lpm_rights - Rigths granted by the system policy module. + * + * @PS3_LPM_RIGHTS_USE_LPM: The right to use the lpm. + * @PS3_LPM_RIGHTS_USE_TB: The right to use the internal trace buffer. + */ + +enum ps3_lpm_rights { + PS3_LPM_RIGHTS_USE_LPM = 0x001, + PS3_LPM_RIGHTS_USE_TB = 0x100, +}; + +/** + * enum ps3_lpm_tb_type - Type of trace buffer lv1 should use. + * + * @PS3_LPM_TB_TYPE_NONE: Do not use a trace buffer. + * @PS3_LPM_RIGHTS_USE_TB: Use the lv1 internal trace buffer. Must have + * rights @PS3_LPM_RIGHTS_USE_TB. + */ + +enum ps3_lpm_tb_type { + PS3_LPM_TB_TYPE_NONE = 0, + PS3_LPM_TB_TYPE_INTERNAL = 1, +}; + +int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache, + u64 tb_cache_size); +int ps3_lpm_close(void); +int ps3_lpm_copy_tb(unsigned long offset, void *buf, unsigned long count, + unsigned long *bytes_copied); +int ps3_lpm_copy_tb_to_user(unsigned long offset, void __user *buf, + unsigned long count, unsigned long *bytes_copied); +void ps3_set_bookmark(u64 bookmark); +void ps3_set_pm_bookmark(u64 tag, u64 incident, u64 th_id); +int ps3_set_signal(u64 rtas_signal_group, u8 signal_bit, u16 sub_unit, + u8 bus_word); + +u32 ps3_read_phys_ctr(u32 cpu, u32 phys_ctr); +void ps3_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val); +u32 ps3_read_ctr(u32 cpu, u32 ctr); +void ps3_write_ctr(u32 cpu, u32 ctr, u32 val); + +u32 ps3_read_pm07_control(u32 cpu, u32 ctr); +void ps3_write_pm07_control(u32 cpu, u32 ctr, u32 val); +u32 ps3_read_pm(u32 cpu, enum pm_reg_name reg); +void ps3_write_pm(u32 cpu, enum pm_reg_name reg, u32 val); + +u32 ps3_get_ctr_size(u32 cpu, u32 phys_ctr); +void ps3_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size); + +void ps3_enable_pm(u32 cpu); +void ps3_disable_pm(u32 cpu); +void ps3_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); +void ps3_disable_pm_interrupts(u32 cpu); + +u32 ps3_get_and_clear_pm_interrupts(u32 cpu); +void ps3_sync_irq(int node); +u32 ps3_get_hw_thread_id(int cpu); +u64 ps3_get_spe_id(void *arg); + +#endif diff --git a/arch/powerpc/include/asm/ps3av.h b/arch/powerpc/include/asm/ps3av.h new file mode 100644 index 000000000000..fda98715cd35 --- /dev/null +++ b/arch/powerpc/include/asm/ps3av.h @@ -0,0 +1,744 @@ +/* + * PS3 AV backend support. + * + * Copyright (C) 2007 Sony Computer Entertainment Inc. + * Copyright 2007 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_PS3AV_H_ +#define _ASM_POWERPC_PS3AV_H_ + +/** command for ioctl() **/ +#define PS3AV_VERSION 0x205 /* version of ps3av command */ + +#define PS3AV_CID_AV_INIT 0x00000001 +#define PS3AV_CID_AV_FIN 0x00000002 +#define PS3AV_CID_AV_GET_HW_CONF 0x00000003 +#define PS3AV_CID_AV_GET_MONITOR_INFO 0x00000004 +#define PS3AV_CID_AV_ENABLE_EVENT 0x00000006 +#define PS3AV_CID_AV_DISABLE_EVENT 0x00000007 +#define PS3AV_CID_AV_TV_MUTE 0x0000000a + +#define PS3AV_CID_AV_VIDEO_CS 0x00010001 +#define PS3AV_CID_AV_VIDEO_MUTE 0x00010002 +#define PS3AV_CID_AV_VIDEO_DISABLE_SIG 0x00010003 +#define PS3AV_CID_AV_AUDIO_PARAM 0x00020001 +#define PS3AV_CID_AV_AUDIO_MUTE 0x00020002 +#define PS3AV_CID_AV_HDMI_MODE 0x00040001 + +#define PS3AV_CID_VIDEO_INIT 0x01000001 +#define PS3AV_CID_VIDEO_MODE 0x01000002 +#define PS3AV_CID_VIDEO_FORMAT 0x01000004 +#define PS3AV_CID_VIDEO_PITCH 0x01000005 + +#define PS3AV_CID_AUDIO_INIT 0x02000001 +#define PS3AV_CID_AUDIO_MODE 0x02000002 +#define PS3AV_CID_AUDIO_MUTE 0x02000003 +#define PS3AV_CID_AUDIO_ACTIVE 0x02000004 +#define PS3AV_CID_AUDIO_INACTIVE 0x02000005 +#define PS3AV_CID_AUDIO_SPDIF_BIT 0x02000006 +#define PS3AV_CID_AUDIO_CTRL 0x02000007 + +#define PS3AV_CID_EVENT_UNPLUGGED 0x10000001 +#define PS3AV_CID_EVENT_PLUGGED 0x10000002 +#define PS3AV_CID_EVENT_HDCP_DONE 0x10000003 +#define PS3AV_CID_EVENT_HDCP_FAIL 0x10000004 +#define PS3AV_CID_EVENT_HDCP_AUTH 0x10000005 +#define PS3AV_CID_EVENT_HDCP_ERROR 0x10000006 + +#define PS3AV_CID_AVB_PARAM 0x04000001 + +/* max backend ports */ +#define PS3AV_HDMI_MAX 2 /* HDMI_0 HDMI_1 */ +#define PS3AV_AVMULTI_MAX 1 /* AVMULTI_0 */ +#define PS3AV_AV_PORT_MAX (PS3AV_HDMI_MAX + PS3AV_AVMULTI_MAX) +#define PS3AV_OPT_PORT_MAX 1 /* SPDIF0 */ +#define PS3AV_HEAD_MAX 2 /* HEAD_A HEAD_B */ + +/* num of pkt for PS3AV_CID_AVB_PARAM */ +#define PS3AV_AVB_NUM_VIDEO PS3AV_HEAD_MAX +#define PS3AV_AVB_NUM_AUDIO 0 /* not supported */ +#define PS3AV_AVB_NUM_AV_VIDEO PS3AV_AV_PORT_MAX +#define PS3AV_AVB_NUM_AV_AUDIO PS3AV_HDMI_MAX + +#define PS3AV_MUTE_PORT_MAX 1 /* num of ports in mute pkt */ + +/* event_bit */ +#define PS3AV_CMD_EVENT_BIT_UNPLUGGED (1 << 0) +#define PS3AV_CMD_EVENT_BIT_PLUGGED (1 << 1) +#define PS3AV_CMD_EVENT_BIT_HDCP_DONE (1 << 2) +#define PS3AV_CMD_EVENT_BIT_HDCP_FAIL (1 << 3) +#define PS3AV_CMD_EVENT_BIT_HDCP_REAUTH (1 << 4) +#define PS3AV_CMD_EVENT_BIT_HDCP_TOPOLOGY (1 << 5) + +/* common params */ +/* mute */ +#define PS3AV_CMD_MUTE_OFF 0x0000 +#define PS3AV_CMD_MUTE_ON 0x0001 +/* avport */ +#define PS3AV_CMD_AVPORT_HDMI_0 0x0000 +#define PS3AV_CMD_AVPORT_HDMI_1 0x0001 +#define PS3AV_CMD_AVPORT_AVMULTI_0 0x0010 +#define PS3AV_CMD_AVPORT_SPDIF_0 0x0020 +#define PS3AV_CMD_AVPORT_SPDIF_1 0x0021 + +/* for av backend */ +/* av_mclk */ +#define PS3AV_CMD_AV_MCLK_128 0x0000 +#define PS3AV_CMD_AV_MCLK_256 0x0001 +#define PS3AV_CMD_AV_MCLK_512 0x0003 +/* av_inputlen */ +#define PS3AV_CMD_AV_INPUTLEN_16 0x02 +#define PS3AV_CMD_AV_INPUTLEN_20 0x0a +#define PS3AV_CMD_AV_INPUTLEN_24 0x0b +/* alayout */ +#define PS3AV_CMD_AV_LAYOUT_32 (1 << 0) +#define PS3AV_CMD_AV_LAYOUT_44 (1 << 1) +#define PS3AV_CMD_AV_LAYOUT_48 (1 << 2) +#define PS3AV_CMD_AV_LAYOUT_88 (1 << 3) +#define PS3AV_CMD_AV_LAYOUT_96 (1 << 4) +#define PS3AV_CMD_AV_LAYOUT_176 (1 << 5) +#define PS3AV_CMD_AV_LAYOUT_192 (1 << 6) +/* hdmi_mode */ +#define PS3AV_CMD_AV_HDMI_MODE_NORMAL 0xff +#define PS3AV_CMD_AV_HDMI_HDCP_OFF 0x01 +#define PS3AV_CMD_AV_HDMI_EDID_PASS 0x80 +#define PS3AV_CMD_AV_HDMI_DVI 0x40 + +/* for video module */ +/* video_head */ +#define PS3AV_CMD_VIDEO_HEAD_A 0x0000 +#define PS3AV_CMD_VIDEO_HEAD_B 0x0001 +/* video_cs_out video_cs_in */ +#define PS3AV_CMD_VIDEO_CS_NONE 0x0000 +#define PS3AV_CMD_VIDEO_CS_RGB_8 0x0001 +#define PS3AV_CMD_VIDEO_CS_YUV444_8 0x0002 +#define PS3AV_CMD_VIDEO_CS_YUV422_8 0x0003 +#define PS3AV_CMD_VIDEO_CS_XVYCC_8 0x0004 +#define PS3AV_CMD_VIDEO_CS_RGB_10 0x0005 +#define PS3AV_CMD_VIDEO_CS_YUV444_10 0x0006 +#define PS3AV_CMD_VIDEO_CS_YUV422_10 0x0007 +#define PS3AV_CMD_VIDEO_CS_XVYCC_10 0x0008 +#define PS3AV_CMD_VIDEO_CS_RGB_12 0x0009 +#define PS3AV_CMD_VIDEO_CS_YUV444_12 0x000a +#define PS3AV_CMD_VIDEO_CS_YUV422_12 0x000b +#define PS3AV_CMD_VIDEO_CS_XVYCC_12 0x000c +/* video_vid */ +#define PS3AV_CMD_VIDEO_VID_NONE 0x0000 +#define PS3AV_CMD_VIDEO_VID_480I 0x0001 +#define PS3AV_CMD_VIDEO_VID_576I 0x0003 +#define PS3AV_CMD_VIDEO_VID_480P 0x0005 +#define PS3AV_CMD_VIDEO_VID_576P 0x0006 +#define PS3AV_CMD_VIDEO_VID_1080I_60HZ 0x0007 +#define PS3AV_CMD_VIDEO_VID_1080I_50HZ 0x0008 +#define PS3AV_CMD_VIDEO_VID_720P_60HZ 0x0009 +#define PS3AV_CMD_VIDEO_VID_720P_50HZ 0x000a +#define PS3AV_CMD_VIDEO_VID_1080P_60HZ 0x000b +#define PS3AV_CMD_VIDEO_VID_1080P_50HZ 0x000c +#define PS3AV_CMD_VIDEO_VID_WXGA 0x000d +#define PS3AV_CMD_VIDEO_VID_SXGA 0x000e +#define PS3AV_CMD_VIDEO_VID_WUXGA 0x000f +#define PS3AV_CMD_VIDEO_VID_480I_A 0x0010 +/* video_format */ +#define PS3AV_CMD_VIDEO_FORMAT_BLACK 0x0000 +#define PS3AV_CMD_VIDEO_FORMAT_ARGB_8BIT 0x0007 +/* video_order */ +#define PS3AV_CMD_VIDEO_ORDER_RGB 0x0000 +#define PS3AV_CMD_VIDEO_ORDER_BGR 0x0001 +/* video_fmt */ +#define PS3AV_CMD_VIDEO_FMT_X8R8G8B8 0x0000 +/* video_out_format */ +#define PS3AV_CMD_VIDEO_OUT_FORMAT_RGB_12BIT 0x0000 +/* video_cl_cnv */ +#define PS3AV_CMD_VIDEO_CL_CNV_ENABLE_LUT 0x0000 +#define PS3AV_CMD_VIDEO_CL_CNV_DISABLE_LUT 0x0010 +/* video_sync */ +#define PS3AV_CMD_VIDEO_SYNC_VSYNC 0x0001 +#define PS3AV_CMD_VIDEO_SYNC_CSYNC 0x0004 +#define PS3AV_CMD_VIDEO_SYNC_HSYNC 0x0010 + +/* for audio module */ +/* num_of_ch */ +#define PS3AV_CMD_AUDIO_NUM_OF_CH_2 0x0000 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_3 0x0001 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_4 0x0002 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_5 0x0003 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_6 0x0004 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_7 0x0005 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_8 0x0006 +/* audio_fs */ +#define PS3AV_CMD_AUDIO_FS_32K 0x0001 +#define PS3AV_CMD_AUDIO_FS_44K 0x0002 +#define PS3AV_CMD_AUDIO_FS_48K 0x0003 +#define PS3AV_CMD_AUDIO_FS_88K 0x0004 +#define PS3AV_CMD_AUDIO_FS_96K 0x0005 +#define PS3AV_CMD_AUDIO_FS_176K 0x0006 +#define PS3AV_CMD_AUDIO_FS_192K 0x0007 +/* audio_word_bits */ +#define PS3AV_CMD_AUDIO_WORD_BITS_16 0x0001 +#define PS3AV_CMD_AUDIO_WORD_BITS_20 0x0002 +#define PS3AV_CMD_AUDIO_WORD_BITS_24 0x0003 +/* audio_format */ +#define PS3AV_CMD_AUDIO_FORMAT_PCM 0x0001 +#define PS3AV_CMD_AUDIO_FORMAT_BITSTREAM 0x00ff +/* audio_source */ +#define PS3AV_CMD_AUDIO_SOURCE_SERIAL 0x0000 +#define PS3AV_CMD_AUDIO_SOURCE_SPDIF 0x0001 +/* audio_swap */ +#define PS3AV_CMD_AUDIO_SWAP_0 0x0000 +#define PS3AV_CMD_AUDIO_SWAP_1 0x0000 +/* audio_map */ +#define PS3AV_CMD_AUDIO_MAP_OUTPUT_0 0x0000 +#define PS3AV_CMD_AUDIO_MAP_OUTPUT_1 0x0001 +#define PS3AV_CMD_AUDIO_MAP_OUTPUT_2 0x0002 +#define PS3AV_CMD_AUDIO_MAP_OUTPUT_3 0x0003 +/* audio_layout */ +#define PS3AV_CMD_AUDIO_LAYOUT_2CH 0x0000 +#define PS3AV_CMD_AUDIO_LAYOUT_6CH 0x000b /* LREClr */ +#define PS3AV_CMD_AUDIO_LAYOUT_8CH 0x001f /* LREClrXY */ +/* audio_downmix */ +#define PS3AV_CMD_AUDIO_DOWNMIX_PERMITTED 0x0000 +#define PS3AV_CMD_AUDIO_DOWNMIX_PROHIBITED 0x0001 + +/* audio_port */ +#define PS3AV_CMD_AUDIO_PORT_HDMI_0 ( 1 << 0 ) +#define PS3AV_CMD_AUDIO_PORT_HDMI_1 ( 1 << 1 ) +#define PS3AV_CMD_AUDIO_PORT_AVMULTI_0 ( 1 << 10 ) +#define PS3AV_CMD_AUDIO_PORT_SPDIF_0 ( 1 << 20 ) +#define PS3AV_CMD_AUDIO_PORT_SPDIF_1 ( 1 << 21 ) + +/* audio_ctrl_id */ +#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_RESET 0x0000 +#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_DE_EMPHASIS 0x0001 +#define PS3AV_CMD_AUDIO_CTRL_ID_AVCLK 0x0002 +/* audio_ctrl_data[0] reset */ +#define PS3AV_CMD_AUDIO_CTRL_RESET_NEGATE 0x0000 +#define PS3AV_CMD_AUDIO_CTRL_RESET_ASSERT 0x0001 +/* audio_ctrl_data[0] de-emphasis */ +#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_OFF 0x0000 +#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_ON 0x0001 +/* audio_ctrl_data[0] avclk */ +#define PS3AV_CMD_AUDIO_CTRL_AVCLK_22 0x0000 +#define PS3AV_CMD_AUDIO_CTRL_AVCLK_18 0x0001 + +/* av_vid */ +/* do not use these params directly, use vid_video2av */ +#define PS3AV_CMD_AV_VID_480I 0x0000 +#define PS3AV_CMD_AV_VID_480P 0x0001 +#define PS3AV_CMD_AV_VID_720P_60HZ 0x0002 +#define PS3AV_CMD_AV_VID_1080I_60HZ 0x0003 +#define PS3AV_CMD_AV_VID_1080P_60HZ 0x0004 +#define PS3AV_CMD_AV_VID_576I 0x0005 +#define PS3AV_CMD_AV_VID_576P 0x0006 +#define PS3AV_CMD_AV_VID_720P_50HZ 0x0007 +#define PS3AV_CMD_AV_VID_1080I_50HZ 0x0008 +#define PS3AV_CMD_AV_VID_1080P_50HZ 0x0009 +#define PS3AV_CMD_AV_VID_WXGA 0x000a +#define PS3AV_CMD_AV_VID_SXGA 0x000b +#define PS3AV_CMD_AV_VID_WUXGA 0x000c +/* av_cs_out av_cs_in */ +/* use cs_video2av() */ +#define PS3AV_CMD_AV_CS_RGB_8 0x0000 +#define PS3AV_CMD_AV_CS_YUV444_8 0x0001 +#define PS3AV_CMD_AV_CS_YUV422_8 0x0002 +#define PS3AV_CMD_AV_CS_XVYCC_8 0x0003 +#define PS3AV_CMD_AV_CS_RGB_10 0x0004 +#define PS3AV_CMD_AV_CS_YUV444_10 0x0005 +#define PS3AV_CMD_AV_CS_YUV422_10 0x0006 +#define PS3AV_CMD_AV_CS_XVYCC_10 0x0007 +#define PS3AV_CMD_AV_CS_RGB_12 0x0008 +#define PS3AV_CMD_AV_CS_YUV444_12 0x0009 +#define PS3AV_CMD_AV_CS_YUV422_12 0x000a +#define PS3AV_CMD_AV_CS_XVYCC_12 0x000b +#define PS3AV_CMD_AV_CS_8 0x0000 +#define PS3AV_CMD_AV_CS_10 0x0001 +#define PS3AV_CMD_AV_CS_12 0x0002 +/* dither */ +#define PS3AV_CMD_AV_DITHER_OFF 0x0000 +#define PS3AV_CMD_AV_DITHER_ON 0x0001 +#define PS3AV_CMD_AV_DITHER_8BIT 0x0000 +#define PS3AV_CMD_AV_DITHER_10BIT 0x0002 +#define PS3AV_CMD_AV_DITHER_12BIT 0x0004 +/* super_white */ +#define PS3AV_CMD_AV_SUPER_WHITE_OFF 0x0000 +#define PS3AV_CMD_AV_SUPER_WHITE_ON 0x0001 +/* aspect */ +#define PS3AV_CMD_AV_ASPECT_16_9 0x0000 +#define PS3AV_CMD_AV_ASPECT_4_3 0x0001 +/* video_cs_cnv() */ +#define PS3AV_CMD_VIDEO_CS_RGB 0x0001 +#define PS3AV_CMD_VIDEO_CS_YUV422 0x0002 +#define PS3AV_CMD_VIDEO_CS_YUV444 0x0003 + +/* for broadcast automode */ +#define PS3AV_RESBIT_720x480P 0x0003 /* 0x0001 | 0x0002 */ +#define PS3AV_RESBIT_720x576P 0x0003 /* 0x0001 | 0x0002 */ +#define PS3AV_RESBIT_1280x720P 0x0004 +#define PS3AV_RESBIT_1920x1080I 0x0008 +#define PS3AV_RESBIT_1920x1080P 0x4000 +#define PS3AV_RES_MASK_60 (PS3AV_RESBIT_720x480P \ + | PS3AV_RESBIT_1280x720P \ + | PS3AV_RESBIT_1920x1080I \ + | PS3AV_RESBIT_1920x1080P) +#define PS3AV_RES_MASK_50 (PS3AV_RESBIT_720x576P \ + | PS3AV_RESBIT_1280x720P \ + | PS3AV_RESBIT_1920x1080I \ + | PS3AV_RESBIT_1920x1080P) + +/* for VESA automode */ +#define PS3AV_RESBIT_VGA 0x0001 +#define PS3AV_RESBIT_WXGA 0x0002 +#define PS3AV_RESBIT_SXGA 0x0004 +#define PS3AV_RESBIT_WUXGA 0x0008 +#define PS3AV_RES_MASK_VESA (PS3AV_RESBIT_WXGA |\ + PS3AV_RESBIT_SXGA |\ + PS3AV_RESBIT_WUXGA) + +#define PS3AV_MONITOR_TYPE_HDMI 1 /* HDMI */ +#define PS3AV_MONITOR_TYPE_DVI 2 /* DVI */ + + +/* for video mode */ +enum ps3av_mode_num { + PS3AV_MODE_AUTO = 0, + PS3AV_MODE_480I = 1, + PS3AV_MODE_480P = 2, + PS3AV_MODE_720P60 = 3, + PS3AV_MODE_1080I60 = 4, + PS3AV_MODE_1080P60 = 5, + PS3AV_MODE_576I = 6, + PS3AV_MODE_576P = 7, + PS3AV_MODE_720P50 = 8, + PS3AV_MODE_1080I50 = 9, + PS3AV_MODE_1080P50 = 10, + PS3AV_MODE_WXGA = 11, + PS3AV_MODE_SXGA = 12, + PS3AV_MODE_WUXGA = 13, +}; + +#define PS3AV_MODE_MASK 0x000F +#define PS3AV_MODE_HDCP_OFF 0x1000 /* Retail PS3 product doesn't support this */ +#define PS3AV_MODE_DITHER 0x0800 +#define PS3AV_MODE_COLOR 0x0400 +#define PS3AV_MODE_WHITE 0x0200 +#define PS3AV_MODE_FULL 0x0080 +#define PS3AV_MODE_DVI 0x0040 +#define PS3AV_MODE_RGB 0x0020 + + +#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_60 PS3AV_MODE_480P +#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_60 PS3AV_MODE_480I +#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_50 PS3AV_MODE_576P +#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_50 PS3AV_MODE_576I + +#define PS3AV_REGION_60 0x01 +#define PS3AV_REGION_50 0x02 +#define PS3AV_REGION_RGB 0x10 + +#define get_status(buf) (((__u32 *)buf)[2]) +#define PS3AV_HDR_SIZE 4 /* version + size */ + + +/** command packet structure **/ +struct ps3av_send_hdr { + u16 version; + u16 size; /* size of command packet */ + u32 cid; /* command id */ +}; + +struct ps3av_reply_hdr { + u16 version; + u16 size; + u32 cid; + u32 status; +}; + +/* backend: initialization */ +struct ps3av_pkt_av_init { + struct ps3av_send_hdr send_hdr; + u32 event_bit; +}; + +/* backend: finalize */ +struct ps3av_pkt_av_fin { + struct ps3av_send_hdr send_hdr; + /* recv */ + u32 reserved; +}; + +/* backend: get port */ +struct ps3av_pkt_av_get_hw_conf { + struct ps3av_send_hdr send_hdr; + /* recv */ + u32 status; + u16 num_of_hdmi; /* out: number of hdmi */ + u16 num_of_avmulti; /* out: number of avmulti */ + u16 num_of_spdif; /* out: number of hdmi */ + u16 reserved; +}; + +/* backend: get monitor info */ +struct ps3av_info_resolution { + u32 res_bits; + u32 native; +}; + +struct ps3av_info_cs { + u8 rgb; + u8 yuv444; + u8 yuv422; + u8 reserved; +}; + +struct ps3av_info_color { + u16 red_x; + u16 red_y; + u16 green_x; + u16 green_y; + u16 blue_x; + u16 blue_y; + u16 white_x; + u16 white_y; + u32 gamma; +}; + +struct ps3av_info_audio { + u8 type; + u8 max_num_of_ch; + u8 fs; + u8 sbit; +}; + +struct ps3av_info_monitor { + u8 avport; + u8 monitor_id[10]; + u8 monitor_type; + u8 monitor_name[16]; + struct ps3av_info_resolution res_60; + struct ps3av_info_resolution res_50; + struct ps3av_info_resolution res_other; + struct ps3av_info_resolution res_vesa; + struct ps3av_info_cs cs; + struct ps3av_info_color color; + u8 supported_ai; + u8 speaker_info; + u8 num_of_audio_block; + struct ps3av_info_audio audio[0]; /* 0 or more audio blocks */ + u8 reserved[169]; +} __attribute__ ((packed)); + +struct ps3av_pkt_av_get_monitor_info { + struct ps3av_send_hdr send_hdr; + u16 avport; /* in: avport */ + u16 reserved; + /* recv */ + struct ps3av_info_monitor info; /* out: monitor info */ +}; + +/* backend: enable/disable event */ +struct ps3av_pkt_av_event { + struct ps3av_send_hdr send_hdr; + u32 event_bit; /* in */ +}; + +/* backend: video cs param */ +struct ps3av_pkt_av_video_cs { + struct ps3av_send_hdr send_hdr; + u16 avport; /* in: avport */ + u16 av_vid; /* in: video resolution */ + u16 av_cs_out; /* in: output color space */ + u16 av_cs_in; /* in: input color space */ + u8 dither; /* in: dither bit length */ + u8 bitlen_out; /* in: bit length */ + u8 super_white; /* in: super white */ + u8 aspect; /* in: aspect ratio */ +}; + +/* backend: video mute */ +struct ps3av_av_mute { + u16 avport; /* in: avport */ + u16 mute; /* in: mute on/off */ +}; + +struct ps3av_pkt_av_video_mute { + struct ps3av_send_hdr send_hdr; + struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX]; +}; + +/* backend: video disable signal */ +struct ps3av_pkt_av_video_disable_sig { + struct ps3av_send_hdr send_hdr; + u16 avport; /* in: avport */ + u16 reserved; +}; + +/* backend: audio param */ +struct ps3av_audio_info_frame { + struct pb1_bit { + u8 ct:4; + u8 rsv:1; + u8 cc:3; + } pb1; + struct pb2_bit { + u8 rsv:3; + u8 sf:3; + u8 ss:2; + } pb2; + u8 pb3; + u8 pb4; + struct pb5_bit { + u8 dm:1; + u8 lsv:4; + u8 rsv:3; + } pb5; +}; + +struct ps3av_pkt_av_audio_param { + struct ps3av_send_hdr send_hdr; + u16 avport; /* in: avport */ + u16 reserved; + u8 mclk; /* in: audio mclk */ + u8 ns[3]; /* in: audio ns val */ + u8 enable; /* in: audio enable */ + u8 swaplr; /* in: audio swap */ + u8 fifomap; /* in: audio fifomap */ + u8 inputctrl; /* in: audio input ctrl */ + u8 inputlen; /* in: sample bit size */ + u8 layout; /* in: speaker layout param */ + struct ps3av_audio_info_frame info; /* in: info */ + u8 chstat[5]; /* in: ch stat */ +}; + +/* backend: audio_mute */ +struct ps3av_pkt_av_audio_mute { + struct ps3av_send_hdr send_hdr; + struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX]; +}; + +/* backend: hdmi_mode */ +struct ps3av_pkt_av_hdmi_mode { + struct ps3av_send_hdr send_hdr; + u8 mode; /* in: hdmi_mode */ + u8 reserved0; + u8 reserved1; + u8 reserved2; +}; + +/* backend: tv_mute */ +struct ps3av_pkt_av_tv_mute { + struct ps3av_send_hdr send_hdr; + u16 avport; /* in: avport HDMI only */ + u16 mute; /* in: mute */ +}; + +/* video: initialize */ +struct ps3av_pkt_video_init { + struct ps3av_send_hdr send_hdr; + /* recv */ + u32 reserved; +}; + +/* video: mode setting */ +struct ps3av_pkt_video_mode { + struct ps3av_send_hdr send_hdr; + u32 video_head; /* in: head */ + u32 reserved; + u32 video_vid; /* in: video resolution */ + u16 reserved1; + u16 width; /* in: width in pixel */ + u16 reserved2; + u16 height; /* in: height in pixel */ + u32 pitch; /* in: line size in byte */ + u32 video_out_format; /* in: out format */ + u32 video_format; /* in: input frame buffer format */ + u8 reserved3; + u8 video_cl_cnv; /* in: color conversion */ + u16 video_order; /* in: input RGB order */ + u32 reserved4; +}; + +/* video: format */ +struct ps3av_pkt_video_format { + struct ps3av_send_hdr send_hdr; + u32 video_head; /* in: head */ + u32 video_format; /* in: frame buffer format */ + u8 reserved; + u8 video_cl_cnv; /* in: color conversion */ + u16 video_order; /* in: input RGB order */ +}; + +/* video: pitch */ +struct ps3av_pkt_video_pitch { + u16 version; + u16 size; /* size of command packet */ + u32 cid; /* command id */ + u32 video_head; /* in: head */ + u32 pitch; /* in: line size in byte */ +}; + +/* audio: initialize */ +struct ps3av_pkt_audio_init { + struct ps3av_send_hdr send_hdr; + /* recv */ + u32 reserved; +}; + +/* audio: mode setting */ +struct ps3av_pkt_audio_mode { + struct ps3av_send_hdr send_hdr; + u8 avport; /* in: avport */ + u8 reserved0[3]; + u32 mask; /* in: mask */ + u32 audio_num_of_ch; /* in: number of ch */ + u32 audio_fs; /* in: sampling freq */ + u32 audio_word_bits; /* in: sample bit size */ + u32 audio_format; /* in: audio output format */ + u32 audio_source; /* in: audio source */ + u8 audio_enable[4]; /* in: audio enable */ + u8 audio_swap[4]; /* in: audio swap */ + u8 audio_map[4]; /* in: audio map */ + u32 audio_layout; /* in: speaker layout */ + u32 audio_downmix; /* in: audio downmix permission */ + u32 audio_downmix_level; + u8 audio_cs_info[8]; /* in: IEC channel status */ +}; + +/* audio: mute */ +struct ps3av_audio_mute { + u8 avport; /* in: opt_port optical */ + u8 reserved[3]; + u32 mute; /* in: mute */ +}; + +struct ps3av_pkt_audio_mute { + struct ps3av_send_hdr send_hdr; + struct ps3av_audio_mute mute[PS3AV_OPT_PORT_MAX]; +}; + +/* audio: active/inactive */ +struct ps3av_pkt_audio_active { + struct ps3av_send_hdr send_hdr; + u32 audio_port; /* in: audio active/inactive port */ +}; + +/* audio: SPDIF user bit */ +struct ps3av_pkt_audio_spdif_bit { + u16 version; + u16 size; /* size of command packet */ + u32 cid; /* command id */ + u8 avport; /* in: avport SPDIF only */ + u8 reserved[3]; + u32 audio_port; /* in: SPDIF only */ + u32 spdif_bit_data[12]; /* in: user bit data */ +}; + +/* audio: audio control */ +struct ps3av_pkt_audio_ctrl { + u16 version; + u16 size; /* size of command packet */ + u32 cid; /* command id */ + u32 audio_ctrl_id; /* in: control id */ + u32 audio_ctrl_data[4]; /* in: control data */ +}; + +/* avb:param */ +#define PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE \ + (PS3AV_AVB_NUM_VIDEO*sizeof(struct ps3av_pkt_video_mode) + \ + PS3AV_AVB_NUM_AUDIO*sizeof(struct ps3av_pkt_audio_mode) + \ + PS3AV_AVB_NUM_AV_VIDEO*sizeof(struct ps3av_pkt_av_video_cs) + \ + PS3AV_AVB_NUM_AV_AUDIO*sizeof(struct ps3av_pkt_av_audio_param)) + +struct ps3av_pkt_avb_param { + struct ps3av_send_hdr send_hdr; + u16 num_of_video_pkt; + u16 num_of_audio_pkt; + u16 num_of_av_video_pkt; + u16 num_of_av_audio_pkt; + /* + * The actual buffer layout depends on the fields above: + * + * struct ps3av_pkt_video_mode video[num_of_video_pkt]; + * struct ps3av_pkt_audio_mode audio[num_of_audio_pkt]; + * struct ps3av_pkt_av_video_cs av_video[num_of_av_video_pkt]; + * struct ps3av_pkt_av_audio_param av_audio[num_of_av_audio_pkt]; + */ + u8 buf[PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE]; +}; + + +/** command status **/ +#define PS3AV_STATUS_SUCCESS 0x0000 /* success */ +#define PS3AV_STATUS_RECEIVE_VUART_ERROR 0x0001 /* receive vuart error */ +#define PS3AV_STATUS_SYSCON_COMMUNICATE_FAIL 0x0002 /* syscon communication error */ +#define PS3AV_STATUS_INVALID_COMMAND 0x0003 /* obsolete invalid CID */ +#define PS3AV_STATUS_INVALID_PORT 0x0004 /* invalid port number */ +#define PS3AV_STATUS_INVALID_VID 0x0005 /* invalid video format */ +#define PS3AV_STATUS_INVALID_COLOR_SPACE 0x0006 /* invalid video colose space */ +#define PS3AV_STATUS_INVALID_FS 0x0007 /* invalid audio sampling freq */ +#define PS3AV_STATUS_INVALID_AUDIO_CH 0x0008 /* invalid audio channel number */ +#define PS3AV_STATUS_UNSUPPORTED_VERSION 0x0009 /* version mismatch */ +#define PS3AV_STATUS_INVALID_SAMPLE_SIZE 0x000a /* invalid audio sample bit size */ +#define PS3AV_STATUS_FAILURE 0x000b /* other failures */ +#define PS3AV_STATUS_UNSUPPORTED_COMMAND 0x000c /* unsupported cid */ +#define PS3AV_STATUS_BUFFER_OVERFLOW 0x000d /* write buffer overflow */ +#define PS3AV_STATUS_INVALID_VIDEO_PARAM 0x000e /* invalid video param */ +#define PS3AV_STATUS_NO_SEL 0x000f /* not exist selector */ +#define PS3AV_STATUS_INVALID_AV_PARAM 0x0010 /* invalid backend param */ +#define PS3AV_STATUS_INVALID_AUDIO_PARAM 0x0011 /* invalid audio param */ +#define PS3AV_STATUS_UNSUPPORTED_HDMI_MODE 0x0012 /* unsupported hdmi mode */ +#define PS3AV_STATUS_NO_SYNC_HEAD 0x0013 /* sync head failed */ + +extern void ps3av_set_hdr(u32, u16, struct ps3av_send_hdr *); +extern int ps3av_do_pkt(u32, u16, size_t, struct ps3av_send_hdr *); + +extern int ps3av_cmd_init(void); +extern int ps3av_cmd_fin(void); +extern int ps3av_cmd_av_video_mute(int, u32 *, u32); +extern int ps3av_cmd_av_video_disable_sig(u32); +extern int ps3av_cmd_av_tv_mute(u32, u32); +extern int ps3av_cmd_enable_event(void); +extern int ps3av_cmd_av_hdmi_mode(u8); +extern u32 ps3av_cmd_set_av_video_cs(void *, u32, int, int, int, u32); +extern u32 ps3av_cmd_set_video_mode(void *, u32, int, int, u32); +extern int ps3av_cmd_video_format_black(u32, u32, u32); +extern int ps3av_cmd_av_audio_mute(int, u32 *, u32); +extern u32 ps3av_cmd_set_av_audio_param(void *, u32, + const struct ps3av_pkt_audio_mode *, + u32); +extern void ps3av_cmd_set_audio_mode(struct ps3av_pkt_audio_mode *, u32, u32, + u32, u32, u32, u32); +extern int ps3av_cmd_audio_mode(struct ps3av_pkt_audio_mode *); +extern int ps3av_cmd_audio_mute(int, u32 *, u32); +extern int ps3av_cmd_audio_active(int, u32); +extern int ps3av_cmd_avb_param(struct ps3av_pkt_avb_param *, u32); +extern int ps3av_cmd_av_get_hw_conf(struct ps3av_pkt_av_get_hw_conf *); +extern int ps3av_cmd_video_get_monitor_info(struct ps3av_pkt_av_get_monitor_info *, + u32); + +extern int ps3av_set_video_mode(u32); +extern int ps3av_set_audio_mode(u32, u32, u32, u32, u32); +extern int ps3av_get_auto_mode(void); +extern int ps3av_get_mode(void); +extern int ps3av_video_mode2res(u32, u32 *, u32 *); +extern int ps3av_video_mute(int); +extern int ps3av_audio_mute(int); +extern int ps3av_dev_open(void); +extern int ps3av_dev_close(void); +extern void ps3av_register_flip_ctl(void (*flip_ctl)(int on, void *data), + void *flip_data); +extern void ps3av_flip_ctl(int on); + +#endif /* _ASM_POWERPC_PS3AV_H_ */ diff --git a/arch/powerpc/include/asm/ps3fb.h b/arch/powerpc/include/asm/ps3fb.h new file mode 100644 index 000000000000..3f121fe4010d --- /dev/null +++ b/arch/powerpc/include/asm/ps3fb.h @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006, 2007 Sony Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published + * by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef _ASM_POWERPC_PS3FB_H_ +#define _ASM_POWERPC_PS3FB_H_ + +#include + +/* ioctl */ +#define PS3FB_IOCTL_SETMODE _IOW('r', 1, int) /* set video mode */ +#define PS3FB_IOCTL_GETMODE _IOR('r', 2, int) /* get video mode */ +#define PS3FB_IOCTL_SCREENINFO _IOR('r', 3, int) /* get screen info */ +#define PS3FB_IOCTL_ON _IO('r', 4) /* use IOCTL_FSEL */ +#define PS3FB_IOCTL_OFF _IO('r', 5) /* return to normal-flip */ +#define PS3FB_IOCTL_FSEL _IOW('r', 6, int) /* blit and flip request */ + +#ifndef FBIO_WAITFORVSYNC +#define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32) /* wait for vsync */ +#endif + +struct ps3fb_ioctl_res { + __u32 xres; /* frame buffer x_size */ + __u32 yres; /* frame buffer y_size */ + __u32 xoff; /* margine x */ + __u32 yoff; /* margine y */ + __u32 num_frames; /* num of frame buffers */ +}; + +#endif /* _ASM_POWERPC_PS3FB_H_ */ diff --git a/arch/powerpc/include/asm/ps3stor.h b/arch/powerpc/include/asm/ps3stor.h new file mode 100644 index 000000000000..6fcaf714fa50 --- /dev/null +++ b/arch/powerpc/include/asm/ps3stor.h @@ -0,0 +1,71 @@ +/* + * PS3 Storage Devices + * + * Copyright (C) 2007 Sony Computer Entertainment Inc. + * Copyright 2007 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published + * by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef _ASM_POWERPC_PS3STOR_H_ +#define _ASM_POWERPC_PS3STOR_H_ + +#include + +#include + + +struct ps3_storage_region { + unsigned int id; + u64 start; + u64 size; +}; + +struct ps3_storage_device { + struct ps3_system_bus_device sbd; + + struct ps3_dma_region dma_region; + unsigned int irq; + u64 blk_size; + + u64 tag; + u64 lv1_status; + struct completion done; + + unsigned long bounce_size; + void *bounce_buf; + u64 bounce_lpar; + dma_addr_t bounce_dma; + + unsigned int num_regions; + unsigned long accessible_regions; + unsigned int region_idx; /* first accessible region */ + struct ps3_storage_region regions[0]; /* Must be last */ +}; + +static inline struct ps3_storage_device *to_ps3_storage_device(struct device *dev) +{ + return container_of(dev, struct ps3_storage_device, sbd.core); +} + +extern int ps3stor_setup(struct ps3_storage_device *dev, + irq_handler_t handler); +extern void ps3stor_teardown(struct ps3_storage_device *dev); +extern u64 ps3stor_read_write_sectors(struct ps3_storage_device *dev, u64 lpar, + u64 start_sector, u64 sectors, + int write); +extern u64 ps3stor_send_command(struct ps3_storage_device *dev, u64 cmd, + u64 arg1, u64 arg2, u64 arg3, u64 arg4); + +#endif /* _ASM_POWERPC_PS3STOR_H_ */ diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h new file mode 100644 index 000000000000..734e0754fb9b --- /dev/null +++ b/arch/powerpc/include/asm/ptrace.h @@ -0,0 +1,293 @@ +#ifndef _ASM_POWERPC_PTRACE_H +#define _ASM_POWERPC_PTRACE_H + +/* + * Copyright (C) 2001 PPC64 Team, IBM Corp + * + * This struct defines the way the registers are stored on the + * kernel stack during a system call or other kernel entry. + * + * this should only contain volatile regs + * since we can keep non-volatile in the thread_struct + * should set this up when only volatiles are saved + * by intr code. + * + * Since this is going on the stack, *CARE MUST BE TAKEN* to insure + * that the overall structure is a multiple of 16 bytes in length. + * + * Note that the offsets of the fields in this struct correspond with + * the PT_* values below. This simplifies arch/powerpc/kernel/ptrace.c. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __ASSEMBLY__ + +struct pt_regs { + unsigned long gpr[32]; + unsigned long nip; + unsigned long msr; + unsigned long orig_gpr3; /* Used for restarting system calls */ + unsigned long ctr; + unsigned long link; + unsigned long xer; + unsigned long ccr; +#ifdef __powerpc64__ + unsigned long softe; /* Soft enabled/disabled */ +#else + unsigned long mq; /* 601 only (not used at present) */ + /* Used on APUS to hold IPL value. */ +#endif + unsigned long trap; /* Reason for being here */ + /* N.B. for critical exceptions on 4xx, the dar and dsisr + fields are overloaded to hold srr0 and srr1. */ + unsigned long dar; /* Fault registers */ + unsigned long dsisr; /* on 4xx/Book-E used for ESR */ + unsigned long result; /* Result of a system call */ +}; + +#endif /* __ASSEMBLY__ */ + +#ifdef __KERNEL__ + +#ifdef __powerpc64__ + +#define __ARCH_WANT_COMPAT_SYS_PTRACE + +#define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */ +#define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */ +#define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265) +#define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + \ + STACK_FRAME_OVERHEAD + 288) +#define STACK_FRAME_MARKER 12 + +/* Size of dummy stack frame allocated when calling signal handler. */ +#define __SIGNAL_FRAMESIZE 128 +#define __SIGNAL_FRAMESIZE32 64 + +#else /* __powerpc64__ */ + +#define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */ +#define STACK_FRAME_LR_SAVE 1 /* Location of LR in stack frame */ +#define STACK_FRAME_REGS_MARKER ASM_CONST(0x72656773) +#define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD) +#define STACK_FRAME_MARKER 2 + +/* Size of stack frame allocated when calling signal handler. */ +#define __SIGNAL_FRAMESIZE 64 + +#endif /* __powerpc64__ */ + +#ifndef __ASSEMBLY__ + +#define instruction_pointer(regs) ((regs)->nip) +#define user_stack_pointer(regs) ((regs)->gpr[1]) +#define regs_return_value(regs) ((regs)->gpr[3]) + +#ifdef CONFIG_SMP +extern unsigned long profile_pc(struct pt_regs *regs); +#else +#define profile_pc(regs) instruction_pointer(regs) +#endif + +#ifdef __powerpc64__ +#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1) +#else +#define user_mode(regs) (((regs)->msr & MSR_PR) != 0) +#endif + +#define force_successful_syscall_return() \ + do { \ + set_thread_flag(TIF_NOERROR); \ + } while(0) + +struct task_struct; +extern unsigned long ptrace_get_reg(struct task_struct *task, int regno); +extern int ptrace_put_reg(struct task_struct *task, int regno, + unsigned long data); + +/* + * We use the least-significant bit of the trap field to indicate + * whether we have saved the full set of registers, or only a + * partial set. A 1 there means the partial set. + * On 4xx we use the next bit to indicate whether the exception + * is a critical exception (1 means it is). + */ +#define FULL_REGS(regs) (((regs)->trap & 1) == 0) +#ifndef __powerpc64__ +#define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) != 0) +#define IS_MCHECK_EXC(regs) (((regs)->trap & 4) != 0) +#define IS_DEBUG_EXC(regs) (((regs)->trap & 8) != 0) +#endif /* ! __powerpc64__ */ +#define TRAP(regs) ((regs)->trap & ~0xF) +#ifdef __powerpc64__ +#define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1) +#else +#define CHECK_FULL_REGS(regs) \ +do { \ + if ((regs)->trap & 1) \ + printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \ +} while (0) +#endif /* __powerpc64__ */ + +/* + * These are defined as per linux/ptrace.h, which see. + */ +#define arch_has_single_step() (1) +extern void user_enable_single_step(struct task_struct *); +extern void user_disable_single_step(struct task_struct *); + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +/* + * Offsets used by 'ptrace' system call interface. + * These can't be changed without breaking binary compatibility + * with MkLinux, etc. + */ +#define PT_R0 0 +#define PT_R1 1 +#define PT_R2 2 +#define PT_R3 3 +#define PT_R4 4 +#define PT_R5 5 +#define PT_R6 6 +#define PT_R7 7 +#define PT_R8 8 +#define PT_R9 9 +#define PT_R10 10 +#define PT_R11 11 +#define PT_R12 12 +#define PT_R13 13 +#define PT_R14 14 +#define PT_R15 15 +#define PT_R16 16 +#define PT_R17 17 +#define PT_R18 18 +#define PT_R19 19 +#define PT_R20 20 +#define PT_R21 21 +#define PT_R22 22 +#define PT_R23 23 +#define PT_R24 24 +#define PT_R25 25 +#define PT_R26 26 +#define PT_R27 27 +#define PT_R28 28 +#define PT_R29 29 +#define PT_R30 30 +#define PT_R31 31 + +#define PT_NIP 32 +#define PT_MSR 33 +#define PT_ORIG_R3 34 +#define PT_CTR 35 +#define PT_LNK 36 +#define PT_XER 37 +#define PT_CCR 38 +#ifndef __powerpc64__ +#define PT_MQ 39 +#else +#define PT_SOFTE 39 +#endif +#define PT_TRAP 40 +#define PT_DAR 41 +#define PT_DSISR 42 +#define PT_RESULT 43 +#define PT_REGS_COUNT 44 + +#define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */ + +#ifndef __powerpc64__ + +#define PT_FPR31 (PT_FPR0 + 2*31) +#define PT_FPSCR (PT_FPR0 + 2*32 + 1) + +#else /* __powerpc64__ */ + +#define PT_FPSCR (PT_FPR0 + 32) /* each FP reg occupies 1 slot in 64-bit space */ + +#ifdef __KERNEL__ +#define PT_FPSCR32 (PT_FPR0 + 2*32 + 1) /* each FP reg occupies 2 32-bit userspace slots */ +#endif + +#define PT_VR0 82 /* each Vector reg occupies 2 slots in 64-bit */ +#define PT_VSCR (PT_VR0 + 32*2 + 1) +#define PT_VRSAVE (PT_VR0 + 33*2) + +#ifdef __KERNEL__ +#define PT_VR0_32 164 /* each Vector reg occupies 4 slots in 32-bit */ +#define PT_VSCR_32 (PT_VR0 + 32*4 + 3) +#define PT_VRSAVE_32 (PT_VR0 + 33*4) +#endif + +/* + * Only store first 32 VSRs here. The second 32 VSRs in VR0-31 + */ +#define PT_VSR0 150 /* each VSR reg occupies 2 slots in 64-bit */ +#define PT_VSR31 (PT_VSR0 + 2*31) +#ifdef __KERNEL__ +#define PT_VSR0_32 300 /* each VSR reg occupies 4 slots in 32-bit */ +#endif +#endif /* __powerpc64__ */ + +/* + * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go. + * The transfer totals 34 quadword. Quadwords 0-31 contain the + * corresponding vector registers. Quadword 32 contains the vscr as the + * last word (offset 12) within that quadword. Quadword 33 contains the + * vrsave as the first word (offset 0) within the quadword. + * + * This definition of the VMX state is compatible with the current PPC32 + * ptrace interface. This allows signal handling and ptrace to use the same + * structures. This also simplifies the implementation of a bi-arch + * (combined (32- and 64-bit) gdb. + */ +#define PTRACE_GETVRREGS 18 +#define PTRACE_SETVRREGS 19 + +/* Get/set all the upper 32-bits of the SPE registers, accumulator, and + * spefscr, in one go */ +#define PTRACE_GETEVRREGS 20 +#define PTRACE_SETEVRREGS 21 + +/* Get the first 32 128bit VSX registers */ +#define PTRACE_GETVSRREGS 27 +#define PTRACE_SETVSRREGS 28 + +/* + * Get or set a debug register. The first 16 are DABR registers and the + * second 16 are IABR registers. + */ +#define PTRACE_GET_DEBUGREG 25 +#define PTRACE_SET_DEBUGREG 26 + +/* (new) PTRACE requests using the same numbers as x86 and the same + * argument ordering. Additionally, they support more registers too + */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +#define PTRACE_GETREGS64 22 +#define PTRACE_SETREGS64 23 + +/* (old) PTRACE requests with inverted arguments */ +#define PPC_PTRACE_GETREGS 0x99 /* Get GPRs 0 - 31 */ +#define PPC_PTRACE_SETREGS 0x98 /* Set GPRs 0 - 31 */ +#define PPC_PTRACE_GETFPREGS 0x97 /* Get FPRs 0 - 31 */ +#define PPC_PTRACE_SETFPREGS 0x96 /* Set FPRs 0 - 31 */ + +/* Calls to trace a 64bit program from a 32bit program */ +#define PPC_PTRACE_PEEKTEXT_3264 0x95 +#define PPC_PTRACE_PEEKDATA_3264 0x94 +#define PPC_PTRACE_POKETEXT_3264 0x93 +#define PPC_PTRACE_POKEDATA_3264 0x92 +#define PPC_PTRACE_PEEKUSR_3264 0x91 +#define PPC_PTRACE_POKEUSR_3264 0x90 + +#endif /* _ASM_POWERPC_PTRACE_H */ diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h new file mode 100644 index 000000000000..edee15d269ea --- /dev/null +++ b/arch/powerpc/include/asm/qe.h @@ -0,0 +1,642 @@ +/* + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * Description: + * QUICC Engine (QE) external definitions and structure. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_POWERPC_QE_H +#define _ASM_POWERPC_QE_H +#ifdef __KERNEL__ + +#include +#include +#include + +#define QE_NUM_OF_SNUM 28 +#define QE_NUM_OF_BRGS 16 +#define QE_NUM_OF_PORTS 1024 + +/* Memory partitions +*/ +#define MEM_PART_SYSTEM 0 +#define MEM_PART_SECONDARY 1 +#define MEM_PART_MURAM 2 + +/* Clocks and BRGs */ +enum qe_clock { + QE_CLK_NONE = 0, + QE_BRG1, /* Baud Rate Generator 1 */ + QE_BRG2, /* Baud Rate Generator 2 */ + QE_BRG3, /* Baud Rate Generator 3 */ + QE_BRG4, /* Baud Rate Generator 4 */ + QE_BRG5, /* Baud Rate Generator 5 */ + QE_BRG6, /* Baud Rate Generator 6 */ + QE_BRG7, /* Baud Rate Generator 7 */ + QE_BRG8, /* Baud Rate Generator 8 */ + QE_BRG9, /* Baud Rate Generator 9 */ + QE_BRG10, /* Baud Rate Generator 10 */ + QE_BRG11, /* Baud Rate Generator 11 */ + QE_BRG12, /* Baud Rate Generator 12 */ + QE_BRG13, /* Baud Rate Generator 13 */ + QE_BRG14, /* Baud Rate Generator 14 */ + QE_BRG15, /* Baud Rate Generator 15 */ + QE_BRG16, /* Baud Rate Generator 16 */ + QE_CLK1, /* Clock 1 */ + QE_CLK2, /* Clock 2 */ + QE_CLK3, /* Clock 3 */ + QE_CLK4, /* Clock 4 */ + QE_CLK5, /* Clock 5 */ + QE_CLK6, /* Clock 6 */ + QE_CLK7, /* Clock 7 */ + QE_CLK8, /* Clock 8 */ + QE_CLK9, /* Clock 9 */ + QE_CLK10, /* Clock 10 */ + QE_CLK11, /* Clock 11 */ + QE_CLK12, /* Clock 12 */ + QE_CLK13, /* Clock 13 */ + QE_CLK14, /* Clock 14 */ + QE_CLK15, /* Clock 15 */ + QE_CLK16, /* Clock 16 */ + QE_CLK17, /* Clock 17 */ + QE_CLK18, /* Clock 18 */ + QE_CLK19, /* Clock 19 */ + QE_CLK20, /* Clock 20 */ + QE_CLK21, /* Clock 21 */ + QE_CLK22, /* Clock 22 */ + QE_CLK23, /* Clock 23 */ + QE_CLK24, /* Clock 24 */ + QE_CLK_DUMMY +}; + +static inline bool qe_clock_is_brg(enum qe_clock clk) +{ + return clk >= QE_BRG1 && clk <= QE_BRG16; +} + +extern spinlock_t cmxgcr_lock; + +/* Export QE common operations */ +extern void __init qe_reset(void); + +/* QE PIO */ +#define QE_PIO_PINS 32 + +struct qe_pio_regs { + __be32 cpodr; /* Open drain register */ + __be32 cpdata; /* Data register */ + __be32 cpdir1; /* Direction register */ + __be32 cpdir2; /* Direction register */ + __be32 cppar1; /* Pin assignment register */ + __be32 cppar2; /* Pin assignment register */ +#ifdef CONFIG_PPC_85xx + u8 pad[8]; +#endif +}; + +extern int par_io_init(struct device_node *np); +extern int par_io_of_config(struct device_node *np); +#define QE_PIO_DIR_IN 2 +#define QE_PIO_DIR_OUT 1 +extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, + int dir, int open_drain, int assignment, + int has_irq); +extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, + int assignment, int has_irq); +extern int par_io_data_set(u8 port, u8 pin, u8 val); + +/* QE internal API */ +int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input); +enum qe_clock qe_clock_source(const char *source); +unsigned int qe_get_brg_clk(void); +int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); +int qe_get_snum(void); +void qe_put_snum(u8 snum); +/* we actually use cpm_muram implementation, define this for convenience */ +#define qe_muram_init cpm_muram_init +#define qe_muram_alloc cpm_muram_alloc +#define qe_muram_alloc_fixed cpm_muram_alloc_fixed +#define qe_muram_free cpm_muram_free +#define qe_muram_addr cpm_muram_addr +#define qe_muram_offset cpm_muram_offset + +/* Structure that defines QE firmware binary files. + * + * See Documentation/powerpc/qe-firmware.txt for a description of these + * fields. + */ +struct qe_firmware { + struct qe_header { + __be32 length; /* Length of the entire structure, in bytes */ + u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */ + u8 version; /* Version of this layout. First ver is '1' */ + } header; + u8 id[62]; /* Null-terminated identifier string */ + u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */ + u8 count; /* Number of microcode[] structures */ + struct { + __be16 model; /* The SOC model */ + u8 major; /* The SOC revision major */ + u8 minor; /* The SOC revision minor */ + } __attribute__ ((packed)) soc; + u8 padding[4]; /* Reserved, for alignment */ + __be64 extended_modes; /* Extended modes */ + __be32 vtraps[8]; /* Virtual trap addresses */ + u8 reserved[4]; /* Reserved, for future expansion */ + struct qe_microcode { + u8 id[32]; /* Null-terminated identifier */ + __be32 traps[16]; /* Trap addresses, 0 == ignore */ + __be32 eccr; /* The value for the ECCR register */ + __be32 iram_offset; /* Offset into I-RAM for the code */ + __be32 count; /* Number of 32-bit words of the code */ + __be32 code_offset; /* Offset of the actual microcode */ + u8 major; /* The microcode version major */ + u8 minor; /* The microcode version minor */ + u8 revision; /* The microcode version revision */ + u8 padding; /* Reserved, for alignment */ + u8 reserved[4]; /* Reserved, for future expansion */ + } __attribute__ ((packed)) microcode[1]; + /* All microcode binaries should be located here */ + /* CRC32 should be located here, after the microcode binaries */ +} __attribute__ ((packed)); + +struct qe_firmware_info { + char id[64]; /* Firmware name */ + u32 vtraps[8]; /* Virtual trap addresses */ + u64 extended_modes; /* Extended modes */ +}; + +/* Upload a firmware to the QE */ +int qe_upload_firmware(const struct qe_firmware *firmware); + +/* Obtain information on the uploaded firmware */ +struct qe_firmware_info *qe_get_firmware_info(void); + +/* QE USB */ +int qe_usb_clock_set(enum qe_clock clk, int rate); + +/* Buffer descriptors */ +struct qe_bd { + __be16 status; + __be16 length; + __be32 buf; +} __attribute__ ((packed)); + +#define BD_STATUS_MASK 0xffff0000 +#define BD_LENGTH_MASK 0x0000ffff + +/* Alignment */ +#define QE_INTR_TABLE_ALIGN 16 /* ??? */ +#define QE_ALIGNMENT_OF_BD 8 +#define QE_ALIGNMENT_OF_PRAM 64 + +/* RISC allocation */ +enum qe_risc_allocation { + QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */ + QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */ + QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose + RISC 1 or RISC 2 */ +}; + +/* QE extended filtering Table Lookup Key Size */ +enum qe_fltr_tbl_lookup_key_size { + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES + = 0x3f, /* LookupKey parsed by the Generate LookupKey + CMD is truncated to 8 bytes */ + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES + = 0x5f, /* LookupKey parsed by the Generate LookupKey + CMD is truncated to 16 bytes */ +}; + +/* QE FLTR extended filtering Largest External Table Lookup Key Size */ +enum qe_fltr_largest_external_tbl_lookup_key_size { + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE + = 0x0,/* not used */ + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES + = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */ + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES + = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */ +}; + +/* structure representing QE parameter RAM */ +struct qe_timer_tables { + u16 tm_base; /* QE timer table base adr */ + u16 tm_ptr; /* QE timer table pointer */ + u16 r_tmr; /* QE timer mode register */ + u16 r_tmv; /* QE timer valid register */ + u32 tm_cmd; /* QE timer cmd register */ + u32 tm_cnt; /* QE timer internal cnt */ +} __attribute__ ((packed)); + +#define QE_FLTR_TAD_SIZE 8 + +/* QE extended filtering Termination Action Descriptor (TAD) */ +struct qe_fltr_tad { + u8 serialized[QE_FLTR_TAD_SIZE]; +} __attribute__ ((packed)); + +/* Communication Direction */ +enum comm_dir { + COMM_DIR_NONE = 0, + COMM_DIR_RX = 1, + COMM_DIR_TX = 2, + COMM_DIR_RX_AND_TX = 3 +}; + +/* QE CMXUCR Registers. + * There are two UCCs represented in each of the four CMXUCR registers. + * These values are for the UCC in the LSBs + */ +#define QE_CMXUCR_MII_ENET_MNG 0x00007000 +#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12 +#define QE_CMXUCR_GRANT 0x00008000 +#define QE_CMXUCR_TSA 0x00004000 +#define QE_CMXUCR_BKPT 0x00000100 +#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F + +/* QE CMXGCR Registers. +*/ +#define QE_CMXGCR_MII_ENET_MNG 0x00007000 +#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 +#define QE_CMXGCR_USBCS 0x0000000f +#define QE_CMXGCR_USBCS_CLK3 0x1 +#define QE_CMXGCR_USBCS_CLK5 0x2 +#define QE_CMXGCR_USBCS_CLK7 0x3 +#define QE_CMXGCR_USBCS_CLK9 0x4 +#define QE_CMXGCR_USBCS_CLK13 0x5 +#define QE_CMXGCR_USBCS_CLK17 0x6 +#define QE_CMXGCR_USBCS_CLK19 0x7 +#define QE_CMXGCR_USBCS_CLK21 0x8 +#define QE_CMXGCR_USBCS_BRG9 0x9 +#define QE_CMXGCR_USBCS_BRG10 0xa + +/* QE CECR Commands. +*/ +#define QE_CR_FLG 0x00010000 +#define QE_RESET 0x80000000 +#define QE_INIT_TX_RX 0x00000000 +#define QE_INIT_RX 0x00000001 +#define QE_INIT_TX 0x00000002 +#define QE_ENTER_HUNT_MODE 0x00000003 +#define QE_STOP_TX 0x00000004 +#define QE_GRACEFUL_STOP_TX 0x00000005 +#define QE_RESTART_TX 0x00000006 +#define QE_CLOSE_RX_BD 0x00000007 +#define QE_SWITCH_COMMAND 0x00000007 +#define QE_SET_GROUP_ADDRESS 0x00000008 +#define QE_START_IDMA 0x00000009 +#define QE_MCC_STOP_RX 0x00000009 +#define QE_ATM_TRANSMIT 0x0000000a +#define QE_HPAC_CLEAR_ALL 0x0000000b +#define QE_GRACEFUL_STOP_RX 0x0000001a +#define QE_RESTART_RX 0x0000001b +#define QE_HPAC_SET_PRIORITY 0x0000010b +#define QE_HPAC_STOP_TX 0x0000020b +#define QE_HPAC_STOP_RX 0x0000030b +#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b +#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b +#define QE_HPAC_START_TX 0x0000060b +#define QE_HPAC_START_RX 0x0000070b +#define QE_USB_STOP_TX 0x0000000a +#define QE_USB_RESTART_TX 0x0000000c +#define QE_QMC_STOP_TX 0x0000000c +#define QE_QMC_STOP_RX 0x0000000d +#define QE_SS7_SU_FIL_RESET 0x0000000e +/* jonathbr added from here down for 83xx */ +#define QE_RESET_BCS 0x0000000a +#define QE_MCC_INIT_TX_RX_16 0x00000003 +#define QE_MCC_STOP_TX 0x00000004 +#define QE_MCC_INIT_TX_1 0x00000005 +#define QE_MCC_INIT_RX_1 0x00000006 +#define QE_MCC_RESET 0x00000007 +#define QE_SET_TIMER 0x00000008 +#define QE_RANDOM_NUMBER 0x0000000c +#define QE_ATM_MULTI_THREAD_INIT 0x00000011 +#define QE_ASSIGN_PAGE 0x00000012 +#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013 +#define QE_START_FLOW_CONTROL 0x00000014 +#define QE_STOP_FLOW_CONTROL 0x00000015 +#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016 + +#define QE_ASSIGN_RISC 0x00000010 +#define QE_CR_MCN_NORMAL_SHIFT 6 +#define QE_CR_MCN_USB_SHIFT 4 +#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8 +#define QE_CR_SNUM_SHIFT 17 + +/* QE CECR Sub Block - sub block of QE command. +*/ +#define QE_CR_SUBBLOCK_INVALID 0x00000000 +#define QE_CR_SUBBLOCK_USB 0x03200000 +#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000 +#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000 +#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000 +#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000 +#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000 +#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000 +#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000 +#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000 +#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000 +#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000 +#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000 +#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000 +#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000 +#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000 +#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000 +#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000 +#define QE_CR_SUBBLOCK_MCC1 0x03800000 +#define QE_CR_SUBBLOCK_MCC2 0x03a00000 +#define QE_CR_SUBBLOCK_MCC3 0x03000000 +#define QE_CR_SUBBLOCK_IDMA1 0x02800000 +#define QE_CR_SUBBLOCK_IDMA2 0x02a00000 +#define QE_CR_SUBBLOCK_IDMA3 0x02c00000 +#define QE_CR_SUBBLOCK_IDMA4 0x02e00000 +#define QE_CR_SUBBLOCK_HPAC 0x01e00000 +#define QE_CR_SUBBLOCK_SPI1 0x01400000 +#define QE_CR_SUBBLOCK_SPI2 0x01600000 +#define QE_CR_SUBBLOCK_RAND 0x01c00000 +#define QE_CR_SUBBLOCK_TIMER 0x01e00000 +#define QE_CR_SUBBLOCK_GENERAL 0x03c00000 + +/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */ +#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */ +#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00 +#define QE_CR_PROTOCOL_QMC 0x02 +#define QE_CR_PROTOCOL_UART 0x04 +#define QE_CR_PROTOCOL_ATM_POS 0x0A +#define QE_CR_PROTOCOL_ETHERNET 0x0C +#define QE_CR_PROTOCOL_L2_SWITCH 0x0D + +/* BRG configuration register */ +#define QE_BRGC_ENABLE 0x00010000 +#define QE_BRGC_DIVISOR_SHIFT 1 +#define QE_BRGC_DIVISOR_MAX 0xFFF +#define QE_BRGC_DIV16 1 + +/* QE Timers registers */ +#define QE_GTCFR1_PCAS 0x80 +#define QE_GTCFR1_STP2 0x20 +#define QE_GTCFR1_RST2 0x10 +#define QE_GTCFR1_GM2 0x08 +#define QE_GTCFR1_GM1 0x04 +#define QE_GTCFR1_STP1 0x02 +#define QE_GTCFR1_RST1 0x01 + +/* SDMA registers */ +#define QE_SDSR_BER1 0x02000000 +#define QE_SDSR_BER2 0x01000000 + +#define QE_SDMR_GLB_1_MSK 0x80000000 +#define QE_SDMR_ADR_SEL 0x20000000 +#define QE_SDMR_BER1_MSK 0x02000000 +#define QE_SDMR_BER2_MSK 0x01000000 +#define QE_SDMR_EB1_MSK 0x00800000 +#define QE_SDMR_ER1_MSK 0x00080000 +#define QE_SDMR_ER2_MSK 0x00040000 +#define QE_SDMR_CEN_MASK 0x0000E000 +#define QE_SDMR_SBER_1 0x00000200 +#define QE_SDMR_SBER_2 0x00000200 +#define QE_SDMR_EB1_PR_MASK 0x000000C0 +#define QE_SDMR_ER1_PR 0x00000008 + +#define QE_SDMR_CEN_SHIFT 13 +#define QE_SDMR_EB1_PR_SHIFT 6 + +#define QE_SDTM_MSNUM_SHIFT 24 + +#define QE_SDEBCR_BA_MASK 0x01FFFFFF + +/* Communication Processor */ +#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */ +#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */ +#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */ + +/* I-RAM */ +#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */ +#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */ + +/* UPC */ +#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ +#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */ +#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */ +#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */ +#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */ + +/* UCC GUEMR register */ +#define UCC_GUEMR_MODE_MASK_RX 0x02 +#define UCC_GUEMR_MODE_FAST_RX 0x02 +#define UCC_GUEMR_MODE_SLOW_RX 0x00 +#define UCC_GUEMR_MODE_MASK_TX 0x01 +#define UCC_GUEMR_MODE_FAST_TX 0x01 +#define UCC_GUEMR_MODE_SLOW_TX 0x00 +#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX) +#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but + must be set 1 */ + +/* structure representing UCC SLOW parameter RAM */ +struct ucc_slow_pram { + __be16 rbase; /* RX BD base address */ + __be16 tbase; /* TX BD base address */ + u8 rbmr; /* RX bus mode register (same as CPM's RFCR) */ + u8 tbmr; /* TX bus mode register (same as CPM's TFCR) */ + __be16 mrblr; /* Rx buffer length */ + __be32 rstate; /* Rx internal state */ + __be32 rptr; /* Rx internal data pointer */ + __be16 rbptr; /* rb BD Pointer */ + __be16 rcount; /* Rx internal byte count */ + __be32 rtemp; /* Rx temp */ + __be32 tstate; /* Tx internal state */ + __be32 tptr; /* Tx internal data pointer */ + __be16 tbptr; /* Tx BD pointer */ + __be16 tcount; /* Tx byte count */ + __be32 ttemp; /* Tx temp */ + __be32 rcrc; /* temp receive CRC */ + __be32 tcrc; /* temp transmit CRC */ +} __attribute__ ((packed)); + +/* General UCC SLOW Mode Register (GUMRH & GUMRL) */ +#define UCC_SLOW_GUMR_H_SAM_QMC 0x00000000 +#define UCC_SLOW_GUMR_H_SAM_SATM 0x00008000 +#define UCC_SLOW_GUMR_H_REVD 0x00002000 +#define UCC_SLOW_GUMR_H_TRX 0x00001000 +#define UCC_SLOW_GUMR_H_TTX 0x00000800 +#define UCC_SLOW_GUMR_H_CDP 0x00000400 +#define UCC_SLOW_GUMR_H_CTSP 0x00000200 +#define UCC_SLOW_GUMR_H_CDS 0x00000100 +#define UCC_SLOW_GUMR_H_CTSS 0x00000080 +#define UCC_SLOW_GUMR_H_TFL 0x00000040 +#define UCC_SLOW_GUMR_H_RFW 0x00000020 +#define UCC_SLOW_GUMR_H_TXSY 0x00000010 +#define UCC_SLOW_GUMR_H_4SYNC 0x00000004 +#define UCC_SLOW_GUMR_H_8SYNC 0x00000008 +#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c +#define UCC_SLOW_GUMR_H_RTSM 0x00000002 +#define UCC_SLOW_GUMR_H_RSYN 0x00000001 + +#define UCC_SLOW_GUMR_L_TCI 0x10000000 +#define UCC_SLOW_GUMR_L_RINV 0x02000000 +#define UCC_SLOW_GUMR_L_TINV 0x01000000 +#define UCC_SLOW_GUMR_L_TEND 0x00040000 +#define UCC_SLOW_GUMR_L_TDCR_MASK 0x00030000 +#define UCC_SLOW_GUMR_L_TDCR_32 0x00030000 +#define UCC_SLOW_GUMR_L_TDCR_16 0x00020000 +#define UCC_SLOW_GUMR_L_TDCR_8 0x00010000 +#define UCC_SLOW_GUMR_L_TDCR_1 0x00000000 +#define UCC_SLOW_GUMR_L_RDCR_MASK 0x0000c000 +#define UCC_SLOW_GUMR_L_RDCR_32 0x0000c000 +#define UCC_SLOW_GUMR_L_RDCR_16 0x00008000 +#define UCC_SLOW_GUMR_L_RDCR_8 0x00004000 +#define UCC_SLOW_GUMR_L_RDCR_1 0x00000000 +#define UCC_SLOW_GUMR_L_RENC_NRZI 0x00000800 +#define UCC_SLOW_GUMR_L_RENC_NRZ 0x00000000 +#define UCC_SLOW_GUMR_L_TENC_NRZI 0x00000100 +#define UCC_SLOW_GUMR_L_TENC_NRZ 0x00000000 +#define UCC_SLOW_GUMR_L_DIAG_MASK 0x000000c0 +#define UCC_SLOW_GUMR_L_DIAG_LE 0x000000c0 +#define UCC_SLOW_GUMR_L_DIAG_ECHO 0x00000080 +#define UCC_SLOW_GUMR_L_DIAG_LOOP 0x00000040 +#define UCC_SLOW_GUMR_L_DIAG_NORM 0x00000000 +#define UCC_SLOW_GUMR_L_ENR 0x00000020 +#define UCC_SLOW_GUMR_L_ENT 0x00000010 +#define UCC_SLOW_GUMR_L_MODE_MASK 0x0000000F +#define UCC_SLOW_GUMR_L_MODE_BISYNC 0x00000008 +#define UCC_SLOW_GUMR_L_MODE_AHDLC 0x00000006 +#define UCC_SLOW_GUMR_L_MODE_UART 0x00000004 +#define UCC_SLOW_GUMR_L_MODE_QMC 0x00000002 + +/* General UCC FAST Mode Register */ +#define UCC_FAST_GUMR_TCI 0x20000000 +#define UCC_FAST_GUMR_TRX 0x10000000 +#define UCC_FAST_GUMR_TTX 0x08000000 +#define UCC_FAST_GUMR_CDP 0x04000000 +#define UCC_FAST_GUMR_CTSP 0x02000000 +#define UCC_FAST_GUMR_CDS 0x01000000 +#define UCC_FAST_GUMR_CTSS 0x00800000 +#define UCC_FAST_GUMR_TXSY 0x00020000 +#define UCC_FAST_GUMR_RSYN 0x00010000 +#define UCC_FAST_GUMR_RTSM 0x00002000 +#define UCC_FAST_GUMR_REVD 0x00000400 +#define UCC_FAST_GUMR_ENR 0x00000020 +#define UCC_FAST_GUMR_ENT 0x00000010 + +/* UART Slow UCC Event Register (UCCE) */ +#define UCC_UART_UCCE_AB 0x0200 +#define UCC_UART_UCCE_IDLE 0x0100 +#define UCC_UART_UCCE_GRA 0x0080 +#define UCC_UART_UCCE_BRKE 0x0040 +#define UCC_UART_UCCE_BRKS 0x0020 +#define UCC_UART_UCCE_CCR 0x0008 +#define UCC_UART_UCCE_BSY 0x0004 +#define UCC_UART_UCCE_TX 0x0002 +#define UCC_UART_UCCE_RX 0x0001 + +/* HDLC Slow UCC Event Register (UCCE) */ +#define UCC_HDLC_UCCE_GLR 0x1000 +#define UCC_HDLC_UCCE_GLT 0x0800 +#define UCC_HDLC_UCCE_IDLE 0x0100 +#define UCC_HDLC_UCCE_BRKE 0x0040 +#define UCC_HDLC_UCCE_BRKS 0x0020 +#define UCC_HDLC_UCCE_TXE 0x0010 +#define UCC_HDLC_UCCE_RXF 0x0008 +#define UCC_HDLC_UCCE_BSY 0x0004 +#define UCC_HDLC_UCCE_TXB 0x0002 +#define UCC_HDLC_UCCE_RXB 0x0001 + +/* BISYNC Slow UCC Event Register (UCCE) */ +#define UCC_BISYNC_UCCE_GRA 0x0080 +#define UCC_BISYNC_UCCE_TXE 0x0010 +#define UCC_BISYNC_UCCE_RCH 0x0008 +#define UCC_BISYNC_UCCE_BSY 0x0004 +#define UCC_BISYNC_UCCE_TXB 0x0002 +#define UCC_BISYNC_UCCE_RXB 0x0001 + +/* Gigabit Ethernet Fast UCC Event Register (UCCE) */ +#define UCC_GETH_UCCE_MPD 0x80000000 +#define UCC_GETH_UCCE_SCAR 0x40000000 +#define UCC_GETH_UCCE_GRA 0x20000000 +#define UCC_GETH_UCCE_CBPR 0x10000000 +#define UCC_GETH_UCCE_BSY 0x08000000 +#define UCC_GETH_UCCE_RXC 0x04000000 +#define UCC_GETH_UCCE_TXC 0x02000000 +#define UCC_GETH_UCCE_TXE 0x01000000 +#define UCC_GETH_UCCE_TXB7 0x00800000 +#define UCC_GETH_UCCE_TXB6 0x00400000 +#define UCC_GETH_UCCE_TXB5 0x00200000 +#define UCC_GETH_UCCE_TXB4 0x00100000 +#define UCC_GETH_UCCE_TXB3 0x00080000 +#define UCC_GETH_UCCE_TXB2 0x00040000 +#define UCC_GETH_UCCE_TXB1 0x00020000 +#define UCC_GETH_UCCE_TXB0 0x00010000 +#define UCC_GETH_UCCE_RXB7 0x00008000 +#define UCC_GETH_UCCE_RXB6 0x00004000 +#define UCC_GETH_UCCE_RXB5 0x00002000 +#define UCC_GETH_UCCE_RXB4 0x00001000 +#define UCC_GETH_UCCE_RXB3 0x00000800 +#define UCC_GETH_UCCE_RXB2 0x00000400 +#define UCC_GETH_UCCE_RXB1 0x00000200 +#define UCC_GETH_UCCE_RXB0 0x00000100 +#define UCC_GETH_UCCE_RXF7 0x00000080 +#define UCC_GETH_UCCE_RXF6 0x00000040 +#define UCC_GETH_UCCE_RXF5 0x00000020 +#define UCC_GETH_UCCE_RXF4 0x00000010 +#define UCC_GETH_UCCE_RXF3 0x00000008 +#define UCC_GETH_UCCE_RXF2 0x00000004 +#define UCC_GETH_UCCE_RXF1 0x00000002 +#define UCC_GETH_UCCE_RXF0 0x00000001 + +/* UPSMR, when used as a UART */ +#define UCC_UART_UPSMR_FLC 0x8000 +#define UCC_UART_UPSMR_SL 0x4000 +#define UCC_UART_UPSMR_CL_MASK 0x3000 +#define UCC_UART_UPSMR_CL_8 0x3000 +#define UCC_UART_UPSMR_CL_7 0x2000 +#define UCC_UART_UPSMR_CL_6 0x1000 +#define UCC_UART_UPSMR_CL_5 0x0000 +#define UCC_UART_UPSMR_UM_MASK 0x0c00 +#define UCC_UART_UPSMR_UM_NORMAL 0x0000 +#define UCC_UART_UPSMR_UM_MAN_MULTI 0x0400 +#define UCC_UART_UPSMR_UM_AUTO_MULTI 0x0c00 +#define UCC_UART_UPSMR_FRZ 0x0200 +#define UCC_UART_UPSMR_RZS 0x0100 +#define UCC_UART_UPSMR_SYN 0x0080 +#define UCC_UART_UPSMR_DRT 0x0040 +#define UCC_UART_UPSMR_PEN 0x0010 +#define UCC_UART_UPSMR_RPM_MASK 0x000c +#define UCC_UART_UPSMR_RPM_ODD 0x0000 +#define UCC_UART_UPSMR_RPM_LOW 0x0004 +#define UCC_UART_UPSMR_RPM_EVEN 0x0008 +#define UCC_UART_UPSMR_RPM_HIGH 0x000C +#define UCC_UART_UPSMR_TPM_MASK 0x0003 +#define UCC_UART_UPSMR_TPM_ODD 0x0000 +#define UCC_UART_UPSMR_TPM_LOW 0x0001 +#define UCC_UART_UPSMR_TPM_EVEN 0x0002 +#define UCC_UART_UPSMR_TPM_HIGH 0x0003 + +/* UCC Transmit On Demand Register (UTODR) */ +#define UCC_SLOW_TOD 0x8000 +#define UCC_FAST_TOD 0x8000 + +/* UCC Bus Mode Register masks */ +/* Not to be confused with the Bundle Mode Register */ +#define UCC_BMR_GBL 0x20 +#define UCC_BMR_BO_BE 0x10 +#define UCC_BMR_CETM 0x04 +#define UCC_BMR_DTB 0x02 +#define UCC_BMR_BDB 0x01 + +/* Function code masks */ +#define FC_GBL 0x20 +#define FC_DTB_LCL 0x02 +#define UCC_FAST_FUNCTION_CODE_GBL 0x20 +#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02 +#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01 + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_QE_H */ diff --git a/arch/powerpc/include/asm/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h new file mode 100644 index 000000000000..56a7745ca343 --- /dev/null +++ b/arch/powerpc/include/asm/qe_ic.h @@ -0,0 +1,128 @@ +/* + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * Description: + * QE IC external definitions and structure. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_POWERPC_QE_IC_H +#define _ASM_POWERPC_QE_IC_H + +#include + +#define NUM_OF_QE_IC_GROUPS 6 + +/* Flags when we init the QE IC */ +#define QE_IC_SPREADMODE_GRP_W 0x00000001 +#define QE_IC_SPREADMODE_GRP_X 0x00000002 +#define QE_IC_SPREADMODE_GRP_Y 0x00000004 +#define QE_IC_SPREADMODE_GRP_Z 0x00000008 +#define QE_IC_SPREADMODE_GRP_RISCA 0x00000010 +#define QE_IC_SPREADMODE_GRP_RISCB 0x00000020 + +#define QE_IC_LOW_SIGNAL 0x00000100 +#define QE_IC_HIGH_SIGNAL 0x00000200 + +#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH 0x00001000 +#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH 0x00002000 +#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH 0x00004000 +#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH 0x00008000 +#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH 0x00010000 +#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH 0x00020000 +#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH 0x00040000 +#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH 0x00080000 +#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH 0x00100000 +#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH 0x00200000 +#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH 0x00400000 +#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH 0x00800000 +#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT (12) + +/* QE interrupt sources groups */ +enum qe_ic_grp_id { + QE_IC_GRP_W = 0, /* QE interrupt controller group W */ + QE_IC_GRP_X, /* QE interrupt controller group X */ + QE_IC_GRP_Y, /* QE interrupt controller group Y */ + QE_IC_GRP_Z, /* QE interrupt controller group Z */ + QE_IC_GRP_RISCA, /* QE interrupt controller RISC group A */ + QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */ +}; + +void qe_ic_init(struct device_node *node, unsigned int flags, + void (*low_handler)(unsigned int irq, struct irq_desc *desc), + void (*high_handler)(unsigned int irq, struct irq_desc *desc)); +void qe_ic_set_highest_priority(unsigned int virq, int high); +int qe_ic_set_priority(unsigned int virq, unsigned int priority); +int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high); + +struct qe_ic; +unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic); +unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic); + +static inline void qe_ic_cascade_low_ipic(unsigned int irq, + struct irq_desc *desc) +{ + struct qe_ic *qe_ic = desc->handler_data; + unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); +} + +static inline void qe_ic_cascade_high_ipic(unsigned int irq, + struct irq_desc *desc) +{ + struct qe_ic *qe_ic = desc->handler_data; + unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); +} + +static inline void qe_ic_cascade_low_mpic(unsigned int irq, + struct irq_desc *desc) +{ + struct qe_ic *qe_ic = desc->handler_data; + unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + desc->chip->eoi(irq); +} + +static inline void qe_ic_cascade_high_mpic(unsigned int irq, + struct irq_desc *desc) +{ + struct qe_ic *qe_ic = desc->handler_data; + unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + desc->chip->eoi(irq); +} + +static inline void qe_ic_cascade_muxed_mpic(unsigned int irq, + struct irq_desc *desc) +{ + struct qe_ic *qe_ic = desc->handler_data; + unsigned int cascade_irq; + + cascade_irq = qe_ic_get_high_irq(qe_ic); + if (cascade_irq == NO_IRQ) + cascade_irq = qe_ic_get_low_irq(qe_ic); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + desc->chip->eoi(irq); +} + +#endif /* _ASM_POWERPC_QE_IC_H */ diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h new file mode 100644 index 000000000000..c6d1ab650778 --- /dev/null +++ b/arch/powerpc/include/asm/reg.h @@ -0,0 +1,788 @@ +/* + * Contains the definition of registers common to all PowerPC variants. + * If a register definition has been changed in a different PowerPC + * variant, we will case it in #ifndef XXX ... #endif, and have the + * number used in the Programming Environments Manual For 32-Bit + * Implementations of the PowerPC Architecture (a.k.a. Green Book) here. + */ + +#ifndef _ASM_POWERPC_REG_H +#define _ASM_POWERPC_REG_H +#ifdef __KERNEL__ + +#include +#include + +/* Pickup Book E specific registers. */ +#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) +#include +#endif /* CONFIG_BOOKE || CONFIG_40x */ + +#ifdef CONFIG_FSL_EMB_PERFMON +#include +#endif + +#ifdef CONFIG_8xx +#include +#endif /* CONFIG_8xx */ + +#define MSR_SF_LG 63 /* Enable 64 bit mode */ +#define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */ +#define MSR_HV_LG 60 /* Hypervisor state */ +#define MSR_VEC_LG 25 /* Enable AltiVec */ +#define MSR_VSX_LG 23 /* Enable VSX */ +#define MSR_POW_LG 18 /* Enable Power Management */ +#define MSR_WE_LG 18 /* Wait State Enable */ +#define MSR_TGPR_LG 17 /* TLB Update registers in use */ +#define MSR_CE_LG 17 /* Critical Interrupt Enable */ +#define MSR_ILE_LG 16 /* Interrupt Little Endian */ +#define MSR_EE_LG 15 /* External Interrupt Enable */ +#define MSR_PR_LG 14 /* Problem State / Privilege Level */ +#define MSR_FP_LG 13 /* Floating Point enable */ +#define MSR_ME_LG 12 /* Machine Check Enable */ +#define MSR_FE0_LG 11 /* Floating Exception mode 0 */ +#define MSR_SE_LG 10 /* Single Step */ +#define MSR_BE_LG 9 /* Branch Trace */ +#define MSR_DE_LG 9 /* Debug Exception Enable */ +#define MSR_FE1_LG 8 /* Floating Exception mode 1 */ +#define MSR_IP_LG 6 /* Exception prefix 0x000/0xFFF */ +#define MSR_IR_LG 5 /* Instruction Relocate */ +#define MSR_DR_LG 4 /* Data Relocate */ +#define MSR_PE_LG 3 /* Protection Enable */ +#define MSR_PX_LG 2 /* Protection Exclusive Mode */ +#define MSR_PMM_LG 2 /* Performance monitor */ +#define MSR_RI_LG 1 /* Recoverable Exception */ +#define MSR_LE_LG 0 /* Little Endian */ + +#ifdef __ASSEMBLY__ +#define __MASK(X) (1<<(X)) +#else +#define __MASK(X) (1UL<<(X)) +#endif + +#ifdef CONFIG_PPC64 +#define MSR_SF __MASK(MSR_SF_LG) /* Enable 64 bit mode */ +#define MSR_ISF __MASK(MSR_ISF_LG) /* Interrupt 64b mode valid on 630 */ +#define MSR_HV __MASK(MSR_HV_LG) /* Hypervisor state */ +#else +/* so tests for these bits fail on 32-bit */ +#define MSR_SF 0 +#define MSR_ISF 0 +#define MSR_HV 0 +#endif + +#define MSR_VEC __MASK(MSR_VEC_LG) /* Enable AltiVec */ +#define MSR_VSX __MASK(MSR_VSX_LG) /* Enable VSX */ +#define MSR_POW __MASK(MSR_POW_LG) /* Enable Power Management */ +#define MSR_WE __MASK(MSR_WE_LG) /* Wait State Enable */ +#define MSR_TGPR __MASK(MSR_TGPR_LG) /* TLB Update registers in use */ +#define MSR_CE __MASK(MSR_CE_LG) /* Critical Interrupt Enable */ +#define MSR_ILE __MASK(MSR_ILE_LG) /* Interrupt Little Endian */ +#define MSR_EE __MASK(MSR_EE_LG) /* External Interrupt Enable */ +#define MSR_PR __MASK(MSR_PR_LG) /* Problem State / Privilege Level */ +#define MSR_FP __MASK(MSR_FP_LG) /* Floating Point enable */ +#define MSR_ME __MASK(MSR_ME_LG) /* Machine Check Enable */ +#define MSR_FE0 __MASK(MSR_FE0_LG) /* Floating Exception mode 0 */ +#define MSR_SE __MASK(MSR_SE_LG) /* Single Step */ +#define MSR_BE __MASK(MSR_BE_LG) /* Branch Trace */ +#define MSR_DE __MASK(MSR_DE_LG) /* Debug Exception Enable */ +#define MSR_FE1 __MASK(MSR_FE1_LG) /* Floating Exception mode 1 */ +#define MSR_IP __MASK(MSR_IP_LG) /* Exception prefix 0x000/0xFFF */ +#define MSR_IR __MASK(MSR_IR_LG) /* Instruction Relocate */ +#define MSR_DR __MASK(MSR_DR_LG) /* Data Relocate */ +#define MSR_PE __MASK(MSR_PE_LG) /* Protection Enable */ +#define MSR_PX __MASK(MSR_PX_LG) /* Protection Exclusive Mode */ +#ifndef MSR_PMM +#define MSR_PMM __MASK(MSR_PMM_LG) /* Performance monitor */ +#endif +#define MSR_RI __MASK(MSR_RI_LG) /* Recoverable Exception */ +#define MSR_LE __MASK(MSR_LE_LG) /* Little Endian */ + +#ifdef CONFIG_PPC64 +#define MSR_ MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV +#define MSR_KERNEL MSR_ | MSR_SF + +#define MSR_USER32 MSR_ | MSR_PR | MSR_EE +#define MSR_USER64 MSR_USER32 | MSR_SF + +#else /* 32-bit */ +/* Default MSR for kernel mode. */ +#ifndef MSR_KERNEL /* reg_booke.h also defines this */ +#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR) +#endif + +#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) +#endif + +/* Floating Point Status and Control Register (FPSCR) Fields */ +#define FPSCR_FX 0x80000000 /* FPU exception summary */ +#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */ +#define FPSCR_VX 0x20000000 /* Invalid operation summary */ +#define FPSCR_OX 0x10000000 /* Overflow exception summary */ +#define FPSCR_UX 0x08000000 /* Underflow exception summary */ +#define FPSCR_ZX 0x04000000 /* Zero-divide exception summary */ +#define FPSCR_XX 0x02000000 /* Inexact exception summary */ +#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */ +#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */ +#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */ +#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */ +#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */ +#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */ +#define FPSCR_FR 0x00040000 /* Fraction rounded */ +#define FPSCR_FI 0x00020000 /* Fraction inexact */ +#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */ +#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */ +#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */ +#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */ +#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */ +#define FPSCR_VE 0x00000080 /* Invalid op exception enable */ +#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */ +#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */ +#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */ +#define FPSCR_XE 0x00000008 /* FP inexact exception enable */ +#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */ +#define FPSCR_RN 0x00000003 /* FPU rounding control */ + +/* Special Purpose Registers (SPRNs)*/ +#define SPRN_CTR 0x009 /* Count Register */ +#define SPRN_DSCR 0x11 +#define SPRN_CTRLF 0x088 +#define SPRN_CTRLT 0x098 +#define CTRL_CT 0xc0000000 /* current thread */ +#define CTRL_CT0 0x80000000 /* thread 0 */ +#define CTRL_CT1 0x40000000 /* thread 1 */ +#define CTRL_TE 0x00c00000 /* thread enable */ +#define CTRL_RUNLATCH 0x1 +#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */ +#define DABR_TRANSLATION (1UL << 2) +#define SPRN_DABR2 0x13D /* e300 */ +#define SPRN_DABRX 0x3F7 /* Data Address Breakpoint Register Extension */ +#define DABRX_USER (1UL << 0) +#define DABRX_KERNEL (1UL << 1) +#define SPRN_DAR 0x013 /* Data Address Register */ +#define SPRN_DBCR 0x136 /* e300 Data Breakpoint Control Reg */ +#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */ +#define DSISR_NOHPTE 0x40000000 /* no translation found */ +#define DSISR_PROTFAULT 0x08000000 /* protection fault */ +#define DSISR_ISSTORE 0x02000000 /* access was a store */ +#define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */ +#define DSISR_NOSEGMENT 0x00200000 /* STAB/SLB miss */ +#define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */ +#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */ +#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */ +#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */ +#define SPRN_SPURR 0x134 /* Scaled PURR */ +#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */ +#define SPRN_LPCR 0x13E /* LPAR Control Register */ +#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */ +#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */ +#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */ +#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */ +#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */ +#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */ +#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */ +#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */ +#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */ +#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */ +#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */ +#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */ +#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */ +#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */ +#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */ +#define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */ + +#define SPRN_DEC 0x016 /* Decrement Register */ +#define SPRN_DER 0x095 /* Debug Enable Regsiter */ +#define DER_RSTE 0x40000000 /* Reset Interrupt */ +#define DER_CHSTPE 0x20000000 /* Check Stop */ +#define DER_MCIE 0x10000000 /* Machine Check Interrupt */ +#define DER_EXTIE 0x02000000 /* External Interrupt */ +#define DER_ALIE 0x01000000 /* Alignment Interrupt */ +#define DER_PRIE 0x00800000 /* Program Interrupt */ +#define DER_FPUVIE 0x00400000 /* FP Unavailable Interrupt */ +#define DER_DECIE 0x00200000 /* Decrementer Interrupt */ +#define DER_SYSIE 0x00040000 /* System Call Interrupt */ +#define DER_TRE 0x00020000 /* Trace Interrupt */ +#define DER_SEIE 0x00004000 /* FP SW Emulation Interrupt */ +#define DER_ITLBMSE 0x00002000 /* Imp. Spec. Instruction TLB Miss */ +#define DER_ITLBERE 0x00001000 /* Imp. Spec. Instruction TLB Error */ +#define DER_DTLBMSE 0x00000800 /* Imp. Spec. Data TLB Miss */ +#define DER_DTLBERE 0x00000400 /* Imp. Spec. Data TLB Error */ +#define DER_LBRKE 0x00000008 /* Load/Store Breakpoint Interrupt */ +#define DER_IBRKE 0x00000004 /* Instruction Breakpoint Interrupt */ +#define DER_EBRKE 0x00000002 /* External Breakpoint Interrupt */ +#define DER_DPIE 0x00000001 /* Dev. Port Nonmaskable Request */ +#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */ +#define SPRN_EAR 0x11A /* External Address Register */ +#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */ +#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */ +#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */ +#define HID0_EMCP (1<<31) /* Enable Machine Check pin */ +#define HID0_EBA (1<<29) /* Enable Bus Address Parity */ +#define HID0_EBD (1<<28) /* Enable Bus Data Parity */ +#define HID0_SBCLK (1<<27) +#define HID0_EICE (1<<26) +#define HID0_TBEN (1<<26) /* Timebase enable - 745x */ +#define HID0_ECLK (1<<25) +#define HID0_PAR (1<<24) +#define HID0_STEN (1<<24) /* Software table search enable - 745x */ +#define HID0_HIGH_BAT (1<<23) /* Enable high BATs - 7455 */ +#define HID0_DOZE (1<<23) +#define HID0_NAP (1<<22) +#define HID0_SLEEP (1<<21) +#define HID0_DPM (1<<20) +#define HID0_BHTCLR (1<<18) /* Clear branch history table - 7450 */ +#define HID0_XAEN (1<<17) /* Extended addressing enable - 7450 */ +#define HID0_NHR (1<<16) /* Not hard reset (software bit-7450)*/ +#define HID0_ICE (1<<15) /* Instruction Cache Enable */ +#define HID0_DCE (1<<14) /* Data Cache Enable */ +#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */ +#define HID0_DLOCK (1<<12) /* Data Cache Lock */ +#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */ +#define HID0_DCI (1<<10) /* Data Cache Invalidate */ +#define HID0_SPD (1<<9) /* Speculative disable */ +#define HID0_DAPUEN (1<<8) /* Debug APU enable */ +#define HID0_SGE (1<<7) /* Store Gathering Enable */ +#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */ +#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */ +#define HID0_LRSTK (1<<4) /* Link register stack - 745x */ +#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */ +#define HID0_ABE (1<<3) /* Address Broadcast Enable */ +#define HID0_FOLD (1<<3) /* Branch Folding enable - 745x */ +#define HID0_BHTE (1<<2) /* Branch History Table Enable */ +#define HID0_BTCD (1<<1) /* Branch target cache disable */ +#define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */ +#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */ + +#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */ +#define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */ +#define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */ +#define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */ +#define HID1_PC1 (1<<15) /* 7450 PLL_CFG[1] */ +#define HID1_PC2 (1<<14) /* 7450 PLL_CFG[2] */ +#define HID1_PC3 (1<<13) /* 7450 PLL_CFG[3] */ +#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */ +#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */ +#define HID1_PS (1<<16) /* 750FX PLL selection */ +#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */ +#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */ +#define SPRN_IABR2 0x3FA /* 83xx */ +#define SPRN_IBCR 0x135 /* 83xx Insn Breakpoint Control Reg */ +#define SPRN_HID4 0x3F4 /* 970 HID4 */ +#define SPRN_HID5 0x3F6 /* 970 HID5 */ +#define SPRN_HID6 0x3F9 /* BE HID 6 */ +#define HID6_LB (0x0F<<12) /* Concurrent Large Page Modes */ +#define HID6_DLP (1<<20) /* Disable all large page modes (4K only) */ +#define SPRN_TSC_CELL 0x399 /* Thread switch control on Cell */ +#define TSC_CELL_DEC_ENABLE_0 0x400000 /* Decrementer Interrupt */ +#define TSC_CELL_DEC_ENABLE_1 0x200000 /* Decrementer Interrupt */ +#define TSC_CELL_EE_ENABLE 0x100000 /* External Interrupt */ +#define TSC_CELL_EE_BOOST 0x080000 /* External Interrupt Boost */ +#define SPRN_TSC 0x3FD /* Thread switch control on others */ +#define SPRN_TST 0x3FC /* Thread switch timeout on others */ +#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2) +#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */ +#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */ +#endif +#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */ +#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */ +#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */ +#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */ +#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */ +#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */ +#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */ +#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */ +#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */ +#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */ +#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */ +#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */ +#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */ +#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */ +#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */ +#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */ +#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */ +#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */ +#define SPRN_ICTRL 0x3F3 /* 1011 7450 icache and interrupt ctrl */ +#define ICTRL_EICE 0x08000000 /* enable icache parity errs */ +#define ICTRL_EDC 0x04000000 /* enable dcache parity errs */ +#define ICTRL_EICP 0x00000100 /* enable icache par. check */ +#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */ +#define SPRN_IMMR 0x27E /* Internal Memory Map Register */ +#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */ +#define SPRN_L2CR2 0x3f8 +#define L2CR_L2E 0x80000000 /* L2 enable */ +#define L2CR_L2PE 0x40000000 /* L2 parity enable */ +#define L2CR_L2SIZ_MASK 0x30000000 /* L2 size mask */ +#define L2CR_L2SIZ_256KB 0x10000000 /* L2 size 256KB */ +#define L2CR_L2SIZ_512KB 0x20000000 /* L2 size 512KB */ +#define L2CR_L2SIZ_1MB 0x30000000 /* L2 size 1MB */ +#define L2CR_L2CLK_MASK 0x0e000000 /* L2 clock mask */ +#define L2CR_L2CLK_DISABLED 0x00000000 /* L2 clock disabled */ +#define L2CR_L2CLK_DIV1 0x02000000 /* L2 clock / 1 */ +#define L2CR_L2CLK_DIV1_5 0x04000000 /* L2 clock / 1.5 */ +#define L2CR_L2CLK_DIV2 0x08000000 /* L2 clock / 2 */ +#define L2CR_L2CLK_DIV2_5 0x0a000000 /* L2 clock / 2.5 */ +#define L2CR_L2CLK_DIV3 0x0c000000 /* L2 clock / 3 */ +#define L2CR_L2RAM_MASK 0x01800000 /* L2 RAM type mask */ +#define L2CR_L2RAM_FLOW 0x00000000 /* L2 RAM flow through */ +#define L2CR_L2RAM_PIPE 0x01000000 /* L2 RAM pipelined */ +#define L2CR_L2RAM_PIPE_LW 0x01800000 /* L2 RAM pipelined latewr */ +#define L2CR_L2DO 0x00400000 /* L2 data only */ +#define L2CR_L2I 0x00200000 /* L2 global invalidate */ +#define L2CR_L2CTL 0x00100000 /* L2 RAM control */ +#define L2CR_L2WT 0x00080000 /* L2 write-through */ +#define L2CR_L2TS 0x00040000 /* L2 test support */ +#define L2CR_L2OH_MASK 0x00030000 /* L2 output hold mask */ +#define L2CR_L2OH_0_5 0x00000000 /* L2 output hold 0.5 ns */ +#define L2CR_L2OH_1_0 0x00010000 /* L2 output hold 1.0 ns */ +#define L2CR_L2SL 0x00008000 /* L2 DLL slow */ +#define L2CR_L2DF 0x00004000 /* L2 differential clock */ +#define L2CR_L2BYP 0x00002000 /* L2 DLL bypass */ +#define L2CR_L2IP 0x00000001 /* L2 GI in progress */ +#define L2CR_L2IO_745x 0x00100000 /* L2 instr. only (745x) */ +#define L2CR_L2DO_745x 0x00010000 /* L2 data only (745x) */ +#define L2CR_L2REP_745x 0x00001000 /* L2 repl. algorithm (745x) */ +#define L2CR_L2HWF_745x 0x00000800 /* L2 hardware flush (745x) */ +#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Regsiter */ +#define L3CR_L3E 0x80000000 /* L3 enable */ +#define L3CR_L3PE 0x40000000 /* L3 data parity enable */ +#define L3CR_L3APE 0x20000000 /* L3 addr parity enable */ +#define L3CR_L3SIZ 0x10000000 /* L3 size */ +#define L3CR_L3CLKEN 0x08000000 /* L3 clock enable */ +#define L3CR_L3RES 0x04000000 /* L3 special reserved bit */ +#define L3CR_L3CLKDIV 0x03800000 /* L3 clock divisor */ +#define L3CR_L3IO 0x00400000 /* L3 instruction only */ +#define L3CR_L3SPO 0x00040000 /* L3 sample point override */ +#define L3CR_L3CKSP 0x00030000 /* L3 clock sample point */ +#define L3CR_L3PSP 0x0000e000 /* L3 P-clock sample point */ +#define L3CR_L3REP 0x00001000 /* L3 replacement algorithm */ +#define L3CR_L3HWF 0x00000800 /* L3 hardware flush */ +#define L3CR_L3I 0x00000400 /* L3 global invalidate */ +#define L3CR_L3RT 0x00000300 /* L3 SRAM type */ +#define L3CR_L3NIRCA 0x00000080 /* L3 non-integer ratio clock adj. */ +#define L3CR_L3DO 0x00000040 /* L3 data only mode */ +#define L3CR_PMEN 0x00000004 /* L3 private memory enable */ +#define L3CR_PMSIZ 0x00000001 /* L3 private memory size */ + +#define SPRN_MSSCR0 0x3f6 /* Memory Subsystem Control Register 0 */ +#define SPRN_MSSSR0 0x3f7 /* Memory Subsystem Status Register 1 */ +#define SPRN_LDSTCR 0x3f8 /* Load/Store control register */ +#define SPRN_LDSTDB 0x3f4 /* */ +#define SPRN_LR 0x008 /* Link Register */ +#ifndef SPRN_PIR +#define SPRN_PIR 0x3FF /* Processor Identification Register */ +#endif +#define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */ +#define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */ +#define SPRN_PURR 0x135 /* Processor Utilization of Resources Reg */ +#define SPRN_PVR 0x11F /* Processor Version Register */ +#define SPRN_RPA 0x3D6 /* Required Physical Address Register */ +#define SPRN_SDA 0x3BF /* Sampled Data Address Register */ +#define SPRN_SDR1 0x019 /* MMU Hash Base Register */ +#define SPRN_ASR 0x118 /* Address Space Register */ +#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */ +#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */ +#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */ +#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */ +#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */ +#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */ +#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */ +#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */ +#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */ +#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */ +#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */ +#define SRR1_WAKEMASK 0x00380000 /* reason for wakeup */ +#define SRR1_WAKERESET 0x00380000 /* System reset */ +#define SRR1_WAKESYSERR 0x00300000 /* System error */ +#define SRR1_WAKEEE 0x00200000 /* External interrupt */ +#define SRR1_WAKEMT 0x00280000 /* mtctrl */ +#define SRR1_WAKEDEC 0x00180000 /* Decrementer interrupt */ +#define SRR1_WAKETHERM 0x00100000 /* Thermal management interrupt */ +#define SPRN_HSRR0 0x13A /* Save/Restore Register 0 */ +#define SPRN_HSRR1 0x13B /* Save/Restore Register 1 */ + +#define SPRN_TBCTL 0x35f /* PA6T Timebase control register */ +#define TBCTL_FREEZE 0x0000000000000000ull /* Freeze all tbs */ +#define TBCTL_RESTART 0x0000000100000000ull /* Restart all tbs */ +#define TBCTL_UPDATE_UPPER 0x0000000200000000ull /* Set upper 32 bits */ +#define TBCTL_UPDATE_LOWER 0x0000000300000000ull /* Set lower 32 bits */ + +#ifndef SPRN_SVR +#define SPRN_SVR 0x11E /* System Version Register */ +#endif +#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */ +/* these bits were defined in inverted endian sense originally, ugh, confusing */ +#define THRM1_TIN (1 << 31) +#define THRM1_TIV (1 << 30) +#define THRM1_THRES(x) ((x&0x7f)<<23) +#define THRM3_SITV(x) ((x&0x3fff)<<1) +#define THRM1_TID (1<<2) +#define THRM1_TIE (1<<1) +#define THRM1_V (1<<0) +#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */ +#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */ +#define THRM3_E (1<<0) +#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */ +#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */ +#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */ +#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */ +#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */ +#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */ +#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */ +#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */ +#define SPRN_VRSAVE 0x100 /* Vector Register Save Register */ +#define SPRN_XER 0x001 /* Fixed Point Exception Register */ + +#define SPRN_SCOMC 0x114 /* SCOM Access Control */ +#define SPRN_SCOMD 0x115 /* SCOM Access DATA */ + +/* Performance monitor SPRs */ +#ifdef CONFIG_PPC64 +#define SPRN_MMCR0 795 +#define MMCR0_FC 0x80000000UL /* freeze counters */ +#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */ +#define MMCR0_KERNEL_DISABLE MMCR0_FCS +#define MMCR0_FCP 0x20000000UL /* freeze in problem state */ +#define MMCR0_PROBLEM_DISABLE MMCR0_FCP +#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */ +#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */ +#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */ +#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */ +#define MMCR0_TBEE 0x00400000UL /* time base exception enable */ +#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/ +#define MMCR0_PMCjCE 0x00004000UL /* PMCj count enable*/ +#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */ +#define MMCR0_PMAO 0x00000080UL /* performance monitor alert has occurred, set to 0 after handling exception */ +#define MMCR0_SHRFC 0x00000040UL /* SHRre freeze conditions between threads */ +#define MMCR0_FCTI 0x00000008UL /* freeze counters in tags inactive mode */ +#define MMCR0_FCTA 0x00000004UL /* freeze counters in tags active mode */ +#define MMCR0_FCWAIT 0x00000002UL /* freeze counter in WAIT state */ +#define MMCR0_FCHV 0x00000001UL /* freeze conditions in hypervisor mode */ +#define SPRN_MMCR1 798 +#define SPRN_MMCRA 0x312 +#define MMCRA_SIHV 0x10000000UL /* state of MSR HV when SIAR set */ +#define MMCRA_SIPR 0x08000000UL /* state of MSR PR when SIAR set */ +#define MMCRA_SLOT 0x07000000UL /* SLOT bits (37-39) */ +#define MMCRA_SLOT_SHIFT 24 +#define MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */ +#define POWER6_MMCRA_SIHV 0x0000040000000000ULL +#define POWER6_MMCRA_SIPR 0x0000020000000000ULL +#define POWER6_MMCRA_THRM 0x00000020UL +#define POWER6_MMCRA_OTHER 0x0000000EUL +#define SPRN_PMC1 787 +#define SPRN_PMC2 788 +#define SPRN_PMC3 789 +#define SPRN_PMC4 790 +#define SPRN_PMC5 791 +#define SPRN_PMC6 792 +#define SPRN_PMC7 793 +#define SPRN_PMC8 794 +#define SPRN_SIAR 780 +#define SPRN_SDAR 781 + +#define SPRN_PA6T_MMCR0 795 +#define PA6T_MMCR0_EN0 0x0000000000000001UL +#define PA6T_MMCR0_EN1 0x0000000000000002UL +#define PA6T_MMCR0_EN2 0x0000000000000004UL +#define PA6T_MMCR0_EN3 0x0000000000000008UL +#define PA6T_MMCR0_EN4 0x0000000000000010UL +#define PA6T_MMCR0_EN5 0x0000000000000020UL +#define PA6T_MMCR0_SUPEN 0x0000000000000040UL +#define PA6T_MMCR0_PREN 0x0000000000000080UL +#define PA6T_MMCR0_HYPEN 0x0000000000000100UL +#define PA6T_MMCR0_FCM0 0x0000000000000200UL +#define PA6T_MMCR0_FCM1 0x0000000000000400UL +#define PA6T_MMCR0_INTGEN 0x0000000000000800UL +#define PA6T_MMCR0_INTEN0 0x0000000000001000UL +#define PA6T_MMCR0_INTEN1 0x0000000000002000UL +#define PA6T_MMCR0_INTEN2 0x0000000000004000UL +#define PA6T_MMCR0_INTEN3 0x0000000000008000UL +#define PA6T_MMCR0_INTEN4 0x0000000000010000UL +#define PA6T_MMCR0_INTEN5 0x0000000000020000UL +#define PA6T_MMCR0_DISCNT 0x0000000000040000UL +#define PA6T_MMCR0_UOP 0x0000000000080000UL +#define PA6T_MMCR0_TRG 0x0000000000100000UL +#define PA6T_MMCR0_TRGEN 0x0000000000200000UL +#define PA6T_MMCR0_TRGREG 0x0000000001600000UL +#define PA6T_MMCR0_SIARLOG 0x0000000002000000UL +#define PA6T_MMCR0_SDARLOG 0x0000000004000000UL +#define PA6T_MMCR0_PROEN 0x0000000008000000UL +#define PA6T_MMCR0_PROLOG 0x0000000010000000UL +#define PA6T_MMCR0_DAMEN2 0x0000000020000000UL +#define PA6T_MMCR0_DAMEN3 0x0000000040000000UL +#define PA6T_MMCR0_DAMEN4 0x0000000080000000UL +#define PA6T_MMCR0_DAMEN5 0x0000000100000000UL +#define PA6T_MMCR0_DAMSEL2 0x0000000200000000UL +#define PA6T_MMCR0_DAMSEL3 0x0000000400000000UL +#define PA6T_MMCR0_DAMSEL4 0x0000000800000000UL +#define PA6T_MMCR0_DAMSEL5 0x0000001000000000UL +#define PA6T_MMCR0_HANDDIS 0x0000002000000000UL +#define PA6T_MMCR0_PCTEN 0x0000004000000000UL +#define PA6T_MMCR0_SOCEN 0x0000008000000000UL +#define PA6T_MMCR0_SOCMOD 0x0000010000000000UL + +#define SPRN_PA6T_MMCR1 798 +#define PA6T_MMCR1_ES2 0x00000000000000ffUL +#define PA6T_MMCR1_ES3 0x000000000000ff00UL +#define PA6T_MMCR1_ES4 0x0000000000ff0000UL +#define PA6T_MMCR1_ES5 0x00000000ff000000UL + +#define SPRN_PA6T_UPMC0 771 /* User PerfMon Counter 0 */ +#define SPRN_PA6T_UPMC1 772 /* ... */ +#define SPRN_PA6T_UPMC2 773 +#define SPRN_PA6T_UPMC3 774 +#define SPRN_PA6T_UPMC4 775 +#define SPRN_PA6T_UPMC5 776 +#define SPRN_PA6T_UMMCR0 779 /* User Monitor Mode Control Register 0 */ +#define SPRN_PA6T_SIAR 780 /* Sampled Instruction Address */ +#define SPRN_PA6T_UMMCR1 782 /* User Monitor Mode Control Register 1 */ +#define SPRN_PA6T_SIER 785 /* Sampled Instruction Event Register */ +#define SPRN_PA6T_PMC0 787 +#define SPRN_PA6T_PMC1 788 +#define SPRN_PA6T_PMC2 789 +#define SPRN_PA6T_PMC3 790 +#define SPRN_PA6T_PMC4 791 +#define SPRN_PA6T_PMC5 792 +#define SPRN_PA6T_TSR0 793 /* Timestamp Register 0 */ +#define SPRN_PA6T_TSR1 794 /* Timestamp Register 1 */ +#define SPRN_PA6T_TSR2 799 /* Timestamp Register 2 */ +#define SPRN_PA6T_TSR3 784 /* Timestamp Register 3 */ + +#define SPRN_PA6T_IER 981 /* Icache Error Register */ +#define SPRN_PA6T_DER 982 /* Dcache Error Register */ +#define SPRN_PA6T_BER 862 /* BIU Error Address Register */ +#define SPRN_PA6T_MER 849 /* MMU Error Register */ + +#define SPRN_PA6T_IMA0 880 /* Instruction Match Array 0 */ +#define SPRN_PA6T_IMA1 881 /* ... */ +#define SPRN_PA6T_IMA2 882 +#define SPRN_PA6T_IMA3 883 +#define SPRN_PA6T_IMA4 884 +#define SPRN_PA6T_IMA5 885 +#define SPRN_PA6T_IMA6 886 +#define SPRN_PA6T_IMA7 887 +#define SPRN_PA6T_IMA8 888 +#define SPRN_PA6T_IMA9 889 +#define SPRN_PA6T_BTCR 978 /* Breakpoint and Tagging Control Register */ +#define SPRN_PA6T_IMAAT 979 /* Instruction Match Array Action Table */ +#define SPRN_PA6T_PCCR 1019 /* Power Counter Control Register */ +#define SPRN_BKMK 1020 /* Cell Bookmark Register */ +#define SPRN_PA6T_RPCCR 1021 /* Retire PC Trace Control Register */ + + +#else /* 32-bit */ +#define SPRN_MMCR0 952 /* Monitor Mode Control Register 0 */ +#define MMCR0_FC 0x80000000UL /* freeze counters */ +#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */ +#define MMCR0_FCP 0x20000000UL /* freeze in problem state */ +#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */ +#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */ +#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */ +#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */ +#define MMCR0_TBEE 0x00400000UL /* time base exception enable */ +#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/ +#define MMCR0_PMCnCE 0x00004000UL /* count enable for all but PMC 1*/ +#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */ +#define MMCR0_PMC1SEL 0x00001fc0UL /* PMC 1 Event */ +#define MMCR0_PMC2SEL 0x0000003fUL /* PMC 2 Event */ + +#define SPRN_MMCR1 956 +#define MMCR1_PMC3SEL 0xf8000000UL /* PMC 3 Event */ +#define MMCR1_PMC4SEL 0x07c00000UL /* PMC 4 Event */ +#define MMCR1_PMC5SEL 0x003e0000UL /* PMC 5 Event */ +#define MMCR1_PMC6SEL 0x0001f800UL /* PMC 6 Event */ +#define SPRN_MMCR2 944 +#define SPRN_PMC1 953 /* Performance Counter Register 1 */ +#define SPRN_PMC2 954 /* Performance Counter Register 2 */ +#define SPRN_PMC3 957 /* Performance Counter Register 3 */ +#define SPRN_PMC4 958 /* Performance Counter Register 4 */ +#define SPRN_PMC5 945 /* Performance Counter Register 5 */ +#define SPRN_PMC6 946 /* Performance Counter Register 6 */ + +#define SPRN_SIAR 955 /* Sampled Instruction Address Register */ + +/* Bit definitions for MMCR0 and PMC1 / PMC2. */ +#define MMCR0_PMC1_CYCLES (1 << 7) +#define MMCR0_PMC1_ICACHEMISS (5 << 7) +#define MMCR0_PMC1_DTLB (6 << 7) +#define MMCR0_PMC2_DCACHEMISS 0x6 +#define MMCR0_PMC2_CYCLES 0x1 +#define MMCR0_PMC2_ITLB 0x7 +#define MMCR0_PMC2_LOADMISSTIME 0x5 +#endif + +/* + * An mtfsf instruction with the L bit set. On CPUs that support this a + * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored. + * + * Until binutils gets the new form of mtfsf, hardwire the instruction. + */ +#ifdef CONFIG_PPC64 +#define MTFSF_L(REG) \ + .long (0xfc00058e | ((0xff) << 17) | ((REG) << 11) | (1 << 25)) +#else +#define MTFSF_L(REG) mtfsf 0xff, (REG) +#endif + +/* Processor Version Register (PVR) field extraction */ + +#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */ +#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */ + +#define __is_processor(pv) (PVR_VER(mfspr(SPRN_PVR)) == (pv)) + +/* + * IBM has further subdivided the standard PowerPC 16-bit version and + * revision subfields of the PVR for the PowerPC 403s into the following: + */ + +#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */ +#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */ +#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */ +#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */ +#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */ +#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */ + +/* Processor Version Numbers */ + +#define PVR_403GA 0x00200000 +#define PVR_403GB 0x00200100 +#define PVR_403GC 0x00200200 +#define PVR_403GCX 0x00201400 +#define PVR_405GP 0x40110000 +#define PVR_STB03XXX 0x40310000 +#define PVR_NP405H 0x41410000 +#define PVR_NP405L 0x41610000 +#define PVR_601 0x00010000 +#define PVR_602 0x00050000 +#define PVR_603 0x00030000 +#define PVR_603e 0x00060000 +#define PVR_603ev 0x00070000 +#define PVR_603r 0x00071000 +#define PVR_604 0x00040000 +#define PVR_604e 0x00090000 +#define PVR_604r 0x000A0000 +#define PVR_620 0x00140000 +#define PVR_740 0x00080000 +#define PVR_750 PVR_740 +#define PVR_740P 0x10080000 +#define PVR_750P PVR_740P +#define PVR_7400 0x000C0000 +#define PVR_7410 0x800C0000 +#define PVR_7450 0x80000000 +#define PVR_8540 0x80200000 +#define PVR_8560 0x80200000 +/* + * For the 8xx processors, all of them report the same PVR family for + * the PowerPC core. The various versions of these processors must be + * differentiated by the version number in the Communication Processor + * Module (CPM). + */ +#define PVR_821 0x00500000 +#define PVR_823 PVR_821 +#define PVR_850 PVR_821 +#define PVR_860 PVR_821 +#define PVR_8240 0x00810100 +#define PVR_8245 0x80811014 +#define PVR_8260 PVR_8240 + +/* 64-bit processors */ +/* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */ +#define PV_NORTHSTAR 0x0033 +#define PV_PULSAR 0x0034 +#define PV_POWER4 0x0035 +#define PV_ICESTAR 0x0036 +#define PV_SSTAR 0x0037 +#define PV_POWER4p 0x0038 +#define PV_970 0x0039 +#define PV_POWER5 0x003A +#define PV_POWER5p 0x003B +#define PV_970FX 0x003C +#define PV_630 0x0040 +#define PV_630p 0x0041 +#define PV_970MP 0x0044 +#define PV_970GX 0x0045 +#define PV_BE 0x0070 +#define PV_PA6T 0x0090 + +/* Macros for setting and retrieving special purpose registers */ +#ifndef __ASSEMBLY__ +#define mfmsr() ({unsigned long rval; \ + asm volatile("mfmsr %0" : "=r" (rval)); rval;}) +#ifdef CONFIG_PPC64 +#define __mtmsrd(v, l) asm volatile("mtmsrd %0," __stringify(l) \ + : : "r" (v)) +#define mtmsrd(v) __mtmsrd((v), 0) +#define mtmsr(v) mtmsrd(v) +#else +#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v)) +#endif + +#define mfspr(rn) ({unsigned long rval; \ + asm volatile("mfspr %0," __stringify(rn) \ + : "=r" (rval)); rval;}) +#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v)) + +#ifdef __powerpc64__ +#ifdef CONFIG_PPC_CELL +#define mftb() ({unsigned long rval; \ + asm volatile( \ + "90: mftb %0;\n" \ + "97: cmpwi %0,0;\n" \ + " beq- 90b;\n" \ + "99:\n" \ + ".section __ftr_fixup,\"a\"\n" \ + ".align 3\n" \ + "98:\n" \ + " .llong %1\n" \ + " .llong %1\n" \ + " .llong 97b-98b\n" \ + " .llong 99b-98b\n" \ + " .llong 0\n" \ + " .llong 0\n" \ + ".previous" \ + : "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;}) +#else +#define mftb() ({unsigned long rval; \ + asm volatile("mftb %0" : "=r" (rval)); rval;}) +#endif /* !CONFIG_PPC_CELL */ + +#else /* __powerpc64__ */ + +#define mftbl() ({unsigned long rval; \ + asm volatile("mftbl %0" : "=r" (rval)); rval;}) +#define mftbu() ({unsigned long rval; \ + asm volatile("mftbu %0" : "=r" (rval)); rval;}) +#endif /* !__powerpc64__ */ + +#define mttbl(v) asm volatile("mttbl %0":: "r"(v)) +#define mttbu(v) asm volatile("mttbu %0":: "r"(v)) + +#ifdef CONFIG_PPC32 +#define mfsrin(v) ({unsigned int rval; \ + asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \ + rval;}) +#endif + +#define proc_trap() asm volatile("trap") + +#ifdef CONFIG_PPC64 + +extern void ppc64_runlatch_on(void); +extern void ppc64_runlatch_off(void); + +extern unsigned long scom970_read(unsigned int address); +extern void scom970_write(unsigned int address, unsigned long value); + +#else +#define ppc64_runlatch_on() +#define ppc64_runlatch_off() + +#endif /* CONFIG_PPC64 */ + +#define __get_SP() ({unsigned long sp; \ + asm volatile("mr %0,1": "=r" (sp)); sp;}) + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_REG_H */ diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h new file mode 100644 index 000000000000..e8ea346b21d3 --- /dev/null +++ b/arch/powerpc/include/asm/reg_8xx.h @@ -0,0 +1,42 @@ +/* + * Contains register definitions common to PowerPC 8xx CPUs. Notice + */ +#ifndef _ASM_POWERPC_REG_8xx_H +#define _ASM_POWERPC_REG_8xx_H + +/* Cache control on the MPC8xx is provided through some additional + * special purpose registers. + */ +#define SPRN_IC_CST 560 /* Instruction cache control/status */ +#define SPRN_IC_ADR 561 /* Address needed for some commands */ +#define SPRN_IC_DAT 562 /* Read-only data register */ +#define SPRN_DC_CST 568 /* Data cache control/status */ +#define SPRN_DC_ADR 569 /* Address needed for some commands */ +#define SPRN_DC_DAT 570 /* Read-only data register */ + +/* Commands. Only the first few are available to the instruction cache. +*/ +#define IDC_ENABLE 0x02000000 /* Cache enable */ +#define IDC_DISABLE 0x04000000 /* Cache disable */ +#define IDC_LDLCK 0x06000000 /* Load and lock */ +#define IDC_UNLINE 0x08000000 /* Unlock line */ +#define IDC_UNALL 0x0a000000 /* Unlock all */ +#define IDC_INVALL 0x0c000000 /* Invalidate all */ + +#define DC_FLINE 0x0e000000 /* Flush data cache line */ +#define DC_SFWT 0x01000000 /* Set forced writethrough mode */ +#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */ +#define DC_SLES 0x05000000 /* Set little endian swap mode */ +#define DC_CLES 0x07000000 /* Clear little endian swap mode */ + +/* Status. +*/ +#define IDC_ENABLED 0x80000000 /* Cache is enabled */ +#define IDC_CERR1 0x00200000 /* Cache error 1 */ +#define IDC_CERR2 0x00100000 /* Cache error 2 */ +#define IDC_CERR3 0x00080000 /* Cache error 3 */ + +#define DC_DFWT 0x40000000 /* Data cache is forced write through */ +#define DC_LES 0x20000000 /* Caches are little endian mode */ + +#endif /* _ASM_POWERPC_REG_8xx_H */ diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h new file mode 100644 index 000000000000..be980f4ee495 --- /dev/null +++ b/arch/powerpc/include/asm/reg_booke.h @@ -0,0 +1,501 @@ +/* + * Contains register definitions common to the Book E PowerPC + * specification. Notice that while the IBM-40x series of CPUs + * are not true Book E PowerPCs, they borrowed a number of features + * before Book E was finalized, and are included here as well. Unfortunatly, + * they sometimes used different locations than true Book E CPUs did. + */ +#ifdef __KERNEL__ +#ifndef __ASM_POWERPC_REG_BOOKE_H__ +#define __ASM_POWERPC_REG_BOOKE_H__ + +/* Machine State Register (MSR) Fields */ +#define MSR_UCLE (1<<26) /* User-mode cache lock enable */ +#define MSR_SPE (1<<25) /* Enable SPE */ +#define MSR_DWE (1<<10) /* Debug Wait Enable */ +#define MSR_UBLE (1<<10) /* BTB lock enable (e500) */ +#define MSR_IS MSR_IR /* Instruction Space */ +#define MSR_DS MSR_DR /* Data Space */ +#define MSR_PMM (1<<2) /* Performance monitor mark bit */ + +/* Default MSR for kernel mode. */ +#if defined (CONFIG_40x) +#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE) +#elif defined(CONFIG_BOOKE) +#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE) +#endif + +/* Special Purpose Registers (SPRNs)*/ +#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */ +#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */ +#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */ +#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */ +#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */ +#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */ +#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */ +#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */ +#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */ +#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */ +#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */ +#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */ +#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */ +#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */ +#define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */ +#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */ +#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */ +#define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */ +#define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */ +#define SPRN_IVOR3 0x193 /* Interrupt Vector Offset Register 3 */ +#define SPRN_IVOR4 0x194 /* Interrupt Vector Offset Register 4 */ +#define SPRN_IVOR5 0x195 /* Interrupt Vector Offset Register 5 */ +#define SPRN_IVOR6 0x196 /* Interrupt Vector Offset Register 6 */ +#define SPRN_IVOR7 0x197 /* Interrupt Vector Offset Register 7 */ +#define SPRN_IVOR8 0x198 /* Interrupt Vector Offset Register 8 */ +#define SPRN_IVOR9 0x199 /* Interrupt Vector Offset Register 9 */ +#define SPRN_IVOR10 0x19A /* Interrupt Vector Offset Register 10 */ +#define SPRN_IVOR11 0x19B /* Interrupt Vector Offset Register 11 */ +#define SPRN_IVOR12 0x19C /* Interrupt Vector Offset Register 12 */ +#define SPRN_IVOR13 0x19D /* Interrupt Vector Offset Register 13 */ +#define SPRN_IVOR14 0x19E /* Interrupt Vector Offset Register 14 */ +#define SPRN_IVOR15 0x19F /* Interrupt Vector Offset Register 15 */ +#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */ +#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */ +#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */ +#define SPRN_L1CFG0 0x203 /* L1 Cache Configure Register 0 */ +#define SPRN_L1CFG1 0x204 /* L1 Cache Configure Register 1 */ +#define SPRN_ATB 0x20E /* Alternate Time Base */ +#define SPRN_ATBL 0x20E /* Alternate Time Base Lower */ +#define SPRN_ATBU 0x20F /* Alternate Time Base Upper */ +#define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */ +#define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */ +#define SPRN_IVOR34 0x212 /* Interrupt Vector Offset Register 34 */ +#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */ +#define SPRN_IVOR36 0x214 /* Interrupt Vector Offset Register 36 */ +#define SPRN_IVOR37 0x215 /* Interrupt Vector Offset Register 37 */ +#define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */ +#define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */ +#define SPRN_MCSR 0x23C /* Machine Check Status Register */ +#define SPRN_MCAR 0x23D /* Machine Check Address Register */ +#define SPRN_DSRR0 0x23E /* Debug Save and Restore Register 0 */ +#define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */ +#define SPRN_SPRG8 0x25C /* Special Purpose Register General 8 */ +#define SPRN_SPRG9 0x25D /* Special Purpose Register General 9 */ +#define SPRN_L1CSR2 0x25E /* L1 Cache Control and Status Register 2 */ +#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */ +#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */ +#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */ +#define SPRN_MAS3 0x273 /* MMU Assist Register 3 */ +#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */ +#define SPRN_MAS5 0x275 /* MMU Assist Register 5 */ +#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */ +#define SPRN_PID1 0x279 /* Process ID Register 1 */ +#define SPRN_PID2 0x27A /* Process ID Register 2 */ +#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */ +#define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */ +#define SPRN_EPR 0x2BE /* External Proxy Register */ +#define SPRN_CCR1 0x378 /* Core Configuration Register 1 */ +#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */ +#define SPRN_MAS7 0x3B0 /* MMU Assist Register 7 */ +#define SPRN_MMUCR 0x3B2 /* MMU Control Register */ +#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */ +#define SPRN_EPLC 0x3B3 /* External Process ID Load Context */ +#define SPRN_EPSC 0x3B4 /* External Process ID Store Context */ +#define SPRN_SGR 0x3B9 /* Storage Guarded Register */ +#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */ +#define SPRN_SLER 0x3BB /* Little-endian real mode */ +#define SPRN_SU0R 0x3BC /* "User 0" real mode (40x) */ +#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */ +#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */ +#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */ +#define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */ +#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */ +#define SPRN_PIT 0x3DB /* Programmable Interval Timer */ +#define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */ +#define SPRN_L2CSR0 0x3F9 /* L2 Data Cache Control and Status Register 0 */ +#define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */ +#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */ +#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */ +#define SPRN_SVR 0x3FF /* System Version Register */ + +/* + * SPRs which have conflicting definitions on true Book E versus classic, + * or IBM 40x. + */ +#ifdef CONFIG_BOOKE +#define SPRN_PID 0x030 /* Process ID */ +#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */ +#define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */ +#define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */ +#define SPRN_DEAR 0x03D /* Data Error Address Register */ +#define SPRN_ESR 0x03E /* Exception Syndrome Register */ +#define SPRN_PIR 0x11E /* Processor Identification Register */ +#define SPRN_DBSR 0x130 /* Debug Status Register */ +#define SPRN_DBCR0 0x134 /* Debug Control Register 0 */ +#define SPRN_DBCR1 0x135 /* Debug Control Register 1 */ +#define SPRN_IAC1 0x138 /* Instruction Address Compare 1 */ +#define SPRN_IAC2 0x139 /* Instruction Address Compare 2 */ +#define SPRN_DAC1 0x13C /* Data Address Compare 1 */ +#define SPRN_DAC2 0x13D /* Data Address Compare 2 */ +#define SPRN_TSR 0x150 /* Timer Status Register */ +#define SPRN_TCR 0x154 /* Timer Control Register */ +#endif /* Book E */ +#ifdef CONFIG_40x +#define SPRN_PID 0x3B1 /* Process ID */ +#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */ +#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */ +#define SPRN_DEAR 0x3D5 /* Data Error Address Register */ +#define SPRN_TSR 0x3D8 /* Timer Status Register */ +#define SPRN_TCR 0x3DA /* Timer Control Register */ +#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */ +#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */ +#define SPRN_DBSR 0x3F0 /* Debug Status Register */ +#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */ +#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */ +#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */ +#define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */ +#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */ +#endif + +/* Bit definitions for CCR1. */ +#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */ +#define CCR1_TCS 0x00000080 /* Timer Clock Select */ + +/* Bit definitions for the MCSR. */ +#define MCSR_MCS 0x80000000 /* Machine Check Summary */ +#define MCSR_IB 0x40000000 /* Instruction PLB Error */ +#define MCSR_DRB 0x20000000 /* Data Read PLB Error */ +#define MCSR_DWB 0x10000000 /* Data Write PLB Error */ +#define MCSR_TLBP 0x08000000 /* TLB Parity Error */ +#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */ +#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */ +#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */ +#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */ + +#ifdef CONFIG_E500 +#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */ +#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */ +#define MCSR_DCP_PERR 0x20000000UL /* D-Cache Push Parity Error */ +#define MCSR_DCPERR 0x10000000UL /* D-Cache Parity Error */ +#define MCSR_BUS_IAERR 0x00000080UL /* Instruction Address Error */ +#define MCSR_BUS_RAERR 0x00000040UL /* Read Address Error */ +#define MCSR_BUS_WAERR 0x00000020UL /* Write Address Error */ +#define MCSR_BUS_IBERR 0x00000010UL /* Instruction Data Error */ +#define MCSR_BUS_RBERR 0x00000008UL /* Read Data Bus Error */ +#define MCSR_BUS_WBERR 0x00000004UL /* Write Data Bus Error */ +#define MCSR_BUS_IPERR 0x00000002UL /* Instruction parity Error */ +#define MCSR_BUS_RPERR 0x00000001UL /* Read parity Error */ + +/* e500 parts may set unused bits in MCSR; mask these off */ +#define MCSR_MASK (MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \ + MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \ + MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \ + MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR) +#endif +#ifdef CONFIG_E200 +#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */ +#define MCSR_CP_PERR 0x20000000UL /* Cache Push Parity Error */ +#define MCSR_CPERR 0x10000000UL /* Cache Parity Error */ +#define MCSR_EXCP_ERR 0x08000000UL /* ISI, ITLB, or Bus Error on 1st insn + fetch for an exception handler */ +#define MCSR_BUS_IRERR 0x00000010UL /* Read Bus Error on instruction fetch*/ +#define MCSR_BUS_DRERR 0x00000008UL /* Read Bus Error on data load */ +#define MCSR_BUS_WRERR 0x00000004UL /* Write Bus Error on buffered + store or cache line push */ + +/* e200 parts may set unused bits in MCSR; mask these off */ +#define MCSR_MASK (MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \ + MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \ + MCSR_BUS_WRERR) +#endif + +/* Bit definitions for the DBSR. */ +/* + * DBSR bits which have conflicting definitions on true Book E versus IBM 40x. + */ +#ifdef CONFIG_BOOKE +#define DBSR_IC 0x08000000 /* Instruction Completion */ +#define DBSR_BT 0x04000000 /* Branch Taken */ +#define DBSR_IRPT 0x02000000 /* Exception Debug Event */ +#define DBSR_TIE 0x01000000 /* Trap Instruction Event */ +#define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */ +#define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */ +#define DBSR_IAC3 0x00200000 /* Instr Address Compare 3 Event */ +#define DBSR_IAC4 0x00100000 /* Instr Address Compare 4 Event */ +#define DBSR_DAC1R 0x00080000 /* Data Addr Compare 1 Read Event */ +#define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */ +#define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */ +#define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */ +#define DBSR_RET 0x00008000 /* Return Debug Event */ +#define DBSR_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ +#define DBSR_CRET 0x00000020 /* Critical Return Debug Event */ +#endif +#ifdef CONFIG_40x +#define DBSR_IC 0x80000000 /* Instruction Completion */ +#define DBSR_BT 0x40000000 /* Branch taken */ +#define DBSR_IRPT 0x20000000 /* Exception Debug Event */ +#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */ +#define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */ +#define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */ +#define DBSR_IAC3 0x00080000 /* Instruction Address Compare 3 Event */ +#define DBSR_IAC4 0x00040000 /* Instruction Address Compare 4 Event */ +#define DBSR_DAC1R 0x01000000 /* Data Address Compare 1 Read Event */ +#define DBSR_DAC1W 0x00800000 /* Data Address Compare 1 Write Event */ +#define DBSR_DAC2R 0x00400000 /* Data Address Compare 2 Read Event */ +#define DBSR_DAC2W 0x00200000 /* Data Address Compare 2 Write Event */ +#endif + +/* Bit definitions related to the ESR. */ +#define ESR_MCI 0x80000000 /* Machine Check - Instruction */ +#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */ +#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */ +#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */ +#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */ +#define ESR_PIL 0x08000000 /* Program Exception - Illegal */ +#define ESR_PPR 0x04000000 /* Program Exception - Privileged */ +#define ESR_PTR 0x02000000 /* Program Exception - Trap */ +#define ESR_FP 0x01000000 /* Floating Point Operation */ +#define ESR_DST 0x00800000 /* Storage Exception - Data miss */ +#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */ +#define ESR_ST 0x00800000 /* Store Operation */ +#define ESR_DLK 0x00200000 /* Data Cache Locking */ +#define ESR_ILK 0x00100000 /* Instr. Cache Locking */ +#define ESR_PUO 0x00040000 /* Unimplemented Operation exception */ +#define ESR_BO 0x00020000 /* Byte Ordering */ + +/* Bit definitions related to the DBCR0. */ +#if defined(CONFIG_40x) +#define DBCR0_EDM 0x80000000 /* External Debug Mode */ +#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ +#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ +#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ +#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ +#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ +#define DBCR0_RST_NONE 0x00000000 /* No Reset */ +#define DBCR0_IC 0x08000000 /* Instruction Completion */ +#define DBCR0_ICMP DBCR0_IC +#define DBCR0_BT 0x04000000 /* Branch Taken */ +#define DBCR0_BRT DBCR0_BT +#define DBCR0_EDE 0x02000000 /* Exception Debug Event */ +#define DBCR0_IRPT DBCR0_EDE +#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ +#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */ +#define DBCR0_IAC1 DBCR0_IA1 +#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */ +#define DBCR0_IAC2 DBCR0_IA2 +#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */ +#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */ +#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */ +#define DBCR0_IAC3 DBCR0_IA3 +#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */ +#define DBCR0_IAC4 DBCR0_IA4 +#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */ +#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */ +#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */ +#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ +#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ +#elif defined(CONFIG_BOOKE) +#define DBCR0_EDM 0x80000000 /* External Debug Mode */ +#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ +#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ +/* DBCR0_RST_* is 44x specific and not followed in fsl booke */ +#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ +#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ +#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ +#define DBCR0_RST_NONE 0x00000000 /* No Reset */ +#define DBCR0_ICMP 0x08000000 /* Instruction Completion */ +#define DBCR0_IC DBCR0_ICMP +#define DBCR0_BRT 0x04000000 /* Branch Taken */ +#define DBCR0_BT DBCR0_BRT +#define DBCR0_IRPT 0x02000000 /* Exception Debug Event */ +#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ +#define DBCR0_TIE DBCR0_TDE +#define DBCR0_IAC1 0x00800000 /* Instr Addr compare 1 enable */ +#define DBCR0_IAC2 0x00400000 /* Instr Addr compare 2 enable */ +#define DBCR0_IAC3 0x00200000 /* Instr Addr compare 3 enable */ +#define DBCR0_IAC4 0x00100000 /* Instr Addr compare 4 enable */ +#define DBCR0_DAC1R 0x00080000 /* DAC 1 Read enable */ +#define DBCR0_DAC1W 0x00040000 /* DAC 1 Write enable */ +#define DBCR0_DAC2R 0x00020000 /* DAC 2 Read enable */ +#define DBCR0_DAC2W 0x00010000 /* DAC 2 Write enable */ +#define DBCR0_RET 0x00008000 /* Return Debug Event */ +#define DBCR0_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ +#define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */ +#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ + +/* Bit definitions related to the DBCR1. */ +#define DBCR1_IAC12M 0x00800000 /* Instr Addr 1-2 range enable */ +#define DBCR1_IAC12MX 0x00C00000 /* Instr Addr 1-2 range eXclusive */ +#define DBCR1_IAC12AT 0x00010000 /* Instr Addr 1-2 range Toggle */ +#define DBCR1_IAC34M 0x00000080 /* Instr Addr 3-4 range enable */ +#define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */ +#define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */ + +/* Bit definitions related to the DBCR2. */ +#define DBCR2_DAC12M 0x00800000 /* DAC 1-2 range enable */ +#define DBCR2_DAC12MX 0x00C00000 /* DAC 1-2 range eXclusive */ +#define DBCR2_DAC12A 0x00200000 /* DAC 1-2 Asynchronous */ +#endif + +/* Bit definitions related to the TCR. */ +#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ +#define TCR_WP_MASK TCR_WP(3) +#define WP_2_17 0 /* 2^17 clocks */ +#define WP_2_21 1 /* 2^21 clocks */ +#define WP_2_25 2 /* 2^25 clocks */ +#define WP_2_29 3 /* 2^29 clocks */ +#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */ +#define TCR_WRC_MASK TCR_WRC(3) +#define WRC_NONE 0 /* No reset will occur */ +#define WRC_CORE 1 /* Core reset will occur */ +#define WRC_CHIP 2 /* Chip reset will occur */ +#define WRC_SYSTEM 3 /* System reset will occur */ +#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */ +#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */ +#define TCR_DIE TCR_PIE /* DEC Interrupt Enable */ +#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */ +#define TCR_FP_MASK TCR_FP(3) +#define FP_2_9 0 /* 2^9 clocks */ +#define FP_2_13 1 /* 2^13 clocks */ +#define FP_2_17 2 /* 2^17 clocks */ +#define FP_2_21 3 /* 2^21 clocks */ +#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */ +#define TCR_ARE 0x00400000 /* Auto Reload Enable */ + +/* Bit definitions for the TSR. */ +#define TSR_ENW 0x80000000 /* Enable Next Watchdog */ +#define TSR_WIS 0x40000000 /* WDT Interrupt Status */ +#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */ +#define WRS_NONE 0 /* No WDT reset occurred */ +#define WRS_CORE 1 /* WDT forced core reset */ +#define WRS_CHIP 2 /* WDT forced chip reset */ +#define WRS_SYSTEM 3 /* WDT forced system reset */ +#define TSR_PIS 0x08000000 /* PIT Interrupt Status */ +#define TSR_DIS TSR_PIS /* DEC Interrupt Status */ +#define TSR_FIS 0x04000000 /* FIT Interrupt Status */ + +/* Bit definitions for the DCCR. */ +#define DCCR_NOCACHE 0 /* Noncacheable */ +#define DCCR_CACHE 1 /* Cacheable */ + +/* Bit definitions for DCWR. */ +#define DCWR_COPY 0 /* Copy-back */ +#define DCWR_WRITE 1 /* Write-through */ + +/* Bit definitions for ICCR. */ +#define ICCR_NOCACHE 0 /* Noncacheable */ +#define ICCR_CACHE 1 /* Cacheable */ + +/* Bit definitions for L1CSR0. */ +#define L1CSR0_CLFC 0x00000100 /* Cache Lock Bits Flash Clear */ +#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */ +#define L1CSR0_CFI 0x00000002 /* Cache Flash Invalidate */ +#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */ + +/* Bit definitions for L1CSR1. */ +#define L1CSR1_ICLFR 0x00000100 /* Instr Cache Lock Bits Flash Reset */ +#define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */ +#define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */ + +/* Bit definitions for L2CSR0. */ +#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */ +#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */ +#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */ +#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */ +#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */ +#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */ +#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */ +#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */ +#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */ +#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */ +#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */ +#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */ + +/* Bit definitions for SGR. */ +#define SGR_NORMAL 0 /* Speculative fetching allowed. */ +#define SGR_GUARDED 1 /* Speculative fetching disallowed. */ + +/* Bit definitions for SPEFSCR. */ +#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */ +#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */ +#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */ +#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */ +#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */ +#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */ +#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */ +#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */ +#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */ +#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */ +#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */ +#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */ +#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */ +#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */ +#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */ +#define SPEFSCR_OV 0x00004000 /* Integer overflow */ +#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */ +#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */ +#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */ +#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */ +#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */ +#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */ +#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */ +#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */ +#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */ +#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */ +#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */ +#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */ + +/* + * The IBM-403 is an even more odd special case, as it is much + * older than the IBM-405 series. We put these down here incase someone + * wishes to support these machines again. + */ +#ifdef CONFIG_403GCX +/* Special Purpose Registers (SPRNs)*/ +#define SPRN_TBHU 0x3CC /* Time Base High User-mode */ +#define SPRN_TBLU 0x3CD /* Time Base Low User-mode */ +#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */ +#define SPRN_TBHI 0x3DC /* Time Base High */ +#define SPRN_TBLO 0x3DD /* Time Base Low */ +#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */ +#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */ +#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */ +#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */ +#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */ + + +/* Bit definitions for the DBCR. */ +#define DBCR_EDM DBCR0_EDM +#define DBCR_IDM DBCR0_IDM +#define DBCR_RST(x) (((x) & 0x3) << 28) +#define DBCR_RST_NONE 0 +#define DBCR_RST_CORE 1 +#define DBCR_RST_CHIP 2 +#define DBCR_RST_SYSTEM 3 +#define DBCR_IC DBCR0_IC /* Instruction Completion Debug Evnt */ +#define DBCR_BT DBCR0_BT /* Branch Taken Debug Event */ +#define DBCR_EDE DBCR0_EDE /* Exception Debug Event */ +#define DBCR_TDE DBCR0_TDE /* TRAP Debug Event */ +#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */ +#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */ +#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */ +#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */ +#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */ +#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */ +#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */ +#define DAC_BYTE 0 +#define DAC_HALF 1 +#define DAC_WORD 2 +#define DAC_QUAD 3 +#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */ +#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */ +#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */ +#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */ +#define DBCR_SED 0x00000020 /* Second Exception Debug Event */ +#define DBCR_STD 0x00000010 /* Second Trap Debug Event */ +#define DBCR_SIA 0x00000008 /* Second IAC Enable */ +#define DBCR_SDA 0x00000004 /* Second DAC Enable */ +#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */ +#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */ +#endif /* 403GCX */ +#endif /* __ASM_POWERPC_REG_BOOKE_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h new file mode 100644 index 000000000000..1e180a594589 --- /dev/null +++ b/arch/powerpc/include/asm/reg_fsl_emb.h @@ -0,0 +1,72 @@ +/* + * Contains register definitions for the Freescale Embedded Performance + * Monitor. + */ +#ifdef __KERNEL__ +#ifndef __ASM_POWERPC_REG_FSL_EMB_H__ +#define __ASM_POWERPC_REG_FSL_EMB_H__ + +#ifndef __ASSEMBLY__ +/* Performance Monitor Registers */ +#define mfpmr(rn) ({unsigned int rval; \ + asm volatile("mfpmr %0," __stringify(rn) \ + : "=r" (rval)); rval;}) +#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v)) +#endif /* __ASSEMBLY__ */ + +/* Freescale Book E Performance Monitor APU Registers */ +#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */ +#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */ +#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */ +#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */ +#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */ +#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */ +#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */ +#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */ + +#define PMLCA_FC 0x80000000 /* Freeze Counter */ +#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */ +#define PMLCA_FCU 0x20000000 /* Freeze in User */ +#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */ +#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */ +#define PMLCA_CE 0x04000000 /* Condition Enable */ + +#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */ +#define PMLCA_EVENT_SHIFT 16 + +#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */ +#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */ +#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */ +#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */ + +#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */ +#define PMLCB_THRESHMUL_SHIFT 8 + +#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */ +#define PMLCB_THRESHOLD_SHIFT 0 + +#define PMRN_PMGC0 0x190 /* PM Global Control 0 */ + +#define PMGC0_FAC 0x80000000 /* Freeze all Counters */ +#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */ +#define PMGC0_FCECE 0x20000000 /* Freeze countes on + Enabled Condition or + Event */ + +#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */ +#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */ +#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */ +#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */ +#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */ +#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */ +#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */ +#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */ +#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */ +#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */ +#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */ +#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */ +#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */ + + +#endif /* __ASM_POWERPC_REG_FSL_EMB_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/resource.h b/arch/powerpc/include/asm/resource.h new file mode 100644 index 000000000000..04bc4db8921b --- /dev/null +++ b/arch/powerpc/include/asm/resource.h @@ -0,0 +1 @@ +#include diff --git a/arch/powerpc/include/asm/rheap.h b/arch/powerpc/include/asm/rheap.h new file mode 100644 index 000000000000..172381769cfc --- /dev/null +++ b/arch/powerpc/include/asm/rheap.h @@ -0,0 +1,89 @@ +/* + * include/asm-ppc/rheap.h + * + * Header file for the implementation of a remote heap. + * + * Author: Pantelis Antoniou + * + * 2004 (c) INTRACOM S.A. Greece. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __ASM_PPC_RHEAP_H__ +#define __ASM_PPC_RHEAP_H__ + +#include + +typedef struct _rh_block { + struct list_head list; + unsigned long start; + int size; + const char *owner; +} rh_block_t; + +typedef struct _rh_info { + unsigned int alignment; + int max_blocks; + int empty_slots; + rh_block_t *block; + struct list_head empty_list; + struct list_head free_list; + struct list_head taken_list; + unsigned int flags; +} rh_info_t; + +#define RHIF_STATIC_INFO 0x1 +#define RHIF_STATIC_BLOCK 0x2 + +typedef struct _rh_stats { + unsigned long start; + int size; + const char *owner; +} rh_stats_t; + +#define RHGS_FREE 0 +#define RHGS_TAKEN 1 + +/* Create a remote heap dynamically */ +extern rh_info_t *rh_create(unsigned int alignment); + +/* Destroy a remote heap, created by rh_create() */ +extern void rh_destroy(rh_info_t * info); + +/* Initialize in place a remote info block */ +extern void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks, + rh_block_t * block); + +/* Attach a free region to manage */ +extern int rh_attach_region(rh_info_t * info, unsigned long start, int size); + +/* Detach a free region */ +extern unsigned long rh_detach_region(rh_info_t * info, unsigned long start, int size); + +/* Allocate the given size from the remote heap (with alignment) */ +extern unsigned long rh_alloc_align(rh_info_t * info, int size, int alignment, + const char *owner); + +/* Allocate the given size from the remote heap */ +extern unsigned long rh_alloc(rh_info_t * info, int size, const char *owner); + +/* Allocate the given size from the given address */ +extern unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, + const char *owner); + +/* Free the allocated area */ +extern int rh_free(rh_info_t * info, unsigned long start); + +/* Get stats for debugging purposes */ +extern int rh_get_stats(rh_info_t * info, int what, int max_stats, + rh_stats_t * stats); + +/* Simple dump of remote heap info */ +extern void rh_dump(rh_info_t * info); + +/* Set owner of taken block */ +extern int rh_set_owner(rh_info_t * info, unsigned long start, const char *owner); + +#endif /* __ASM_PPC_RHEAP_H__ */ diff --git a/arch/powerpc/include/asm/rio.h b/arch/powerpc/include/asm/rio.h new file mode 100644 index 000000000000..0018bf80cb25 --- /dev/null +++ b/arch/powerpc/include/asm/rio.h @@ -0,0 +1,18 @@ +/* + * RapidIO architecture support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef ASM_PPC_RIO_H +#define ASM_PPC_RIO_H + +extern void platform_rio_init(void); + +#endif /* ASM_PPC_RIO_H */ diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h new file mode 100644 index 000000000000..8eaa7b28d9d0 --- /dev/null +++ b/arch/powerpc/include/asm/rtas.h @@ -0,0 +1,247 @@ +#ifndef _POWERPC_RTAS_H +#define _POWERPC_RTAS_H +#ifdef __KERNEL__ + +#include +#include + +/* + * Definitions for talking to the RTAS on CHRP machines. + * + * Copyright (C) 2001 Peter Bergner + * Copyright (C) 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define RTAS_UNKNOWN_SERVICE (-1) +#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */ + +/* Buffer size for ppc_rtas system call. */ +#define RTAS_RMOBUF_MAX (64 * 1024) + +/* RTAS return status codes */ +#define RTAS_NOT_SUSPENDABLE -9004 +#define RTAS_BUSY -2 /* RTAS Busy */ +#define RTAS_EXTENDED_DELAY_MIN 9900 +#define RTAS_EXTENDED_DELAY_MAX 9905 + +/* + * In general to call RTAS use rtas_token("string") to lookup + * an RTAS token for the given string (e.g. "event-scan"). + * To actually perform the call use + * ret = rtas_call(token, n_in, n_out, ...) + * Where n_in is the number of input parameters and + * n_out is the number of output parameters + * + * If the "string" is invalid on this system, RTAS_UNKNOWN_SERVICE + * will be returned as a token. rtas_call() does look for this + * token and error out gracefully so rtas_call(rtas_token("str"), ...) + * may be safely used for one-shot calls to RTAS. + * + */ + +typedef u32 rtas_arg_t; + +struct rtas_args { + u32 token; + u32 nargs; + u32 nret; + rtas_arg_t args[16]; + rtas_arg_t *rets; /* Pointer to return values in args[]. */ +}; + +struct rtas_t { + unsigned long entry; /* physical address pointer */ + unsigned long base; /* physical address pointer */ + unsigned long size; + spinlock_t lock; + struct rtas_args args; + struct device_node *dev; /* virtual address pointer */ +}; + +/* RTAS event classes */ +#define RTAS_INTERNAL_ERROR 0x80000000 /* set bit 0 */ +#define RTAS_EPOW_WARNING 0x40000000 /* set bit 1 */ +#define RTAS_POWERMGM_EVENTS 0x20000000 /* set bit 2 */ +#define RTAS_HOTPLUG_EVENTS 0x10000000 /* set bit 3 */ +#define RTAS_EVENT_SCAN_ALL_EVENTS 0xf0000000 + +/* RTAS event severity */ +#define RTAS_SEVERITY_FATAL 0x5 +#define RTAS_SEVERITY_ERROR 0x4 +#define RTAS_SEVERITY_ERROR_SYNC 0x3 +#define RTAS_SEVERITY_WARNING 0x2 +#define RTAS_SEVERITY_EVENT 0x1 +#define RTAS_SEVERITY_NO_ERROR 0x0 + +/* RTAS event disposition */ +#define RTAS_DISP_FULLY_RECOVERED 0x0 +#define RTAS_DISP_LIMITED_RECOVERY 0x1 +#define RTAS_DISP_NOT_RECOVERED 0x2 + +/* RTAS event initiator */ +#define RTAS_INITIATOR_UNKNOWN 0x0 +#define RTAS_INITIATOR_CPU 0x1 +#define RTAS_INITIATOR_PCI 0x2 +#define RTAS_INITIATOR_ISA 0x3 +#define RTAS_INITIATOR_MEMORY 0x4 +#define RTAS_INITIATOR_POWERMGM 0x5 + +/* RTAS event target */ +#define RTAS_TARGET_UNKNOWN 0x0 +#define RTAS_TARGET_CPU 0x1 +#define RTAS_TARGET_PCI 0x2 +#define RTAS_TARGET_ISA 0x3 +#define RTAS_TARGET_MEMORY 0x4 +#define RTAS_TARGET_POWERMGM 0x5 + +/* RTAS event type */ +#define RTAS_TYPE_RETRY 0x01 +#define RTAS_TYPE_TCE_ERR 0x02 +#define RTAS_TYPE_INTERN_DEV_FAIL 0x03 +#define RTAS_TYPE_TIMEOUT 0x04 +#define RTAS_TYPE_DATA_PARITY 0x05 +#define RTAS_TYPE_ADDR_PARITY 0x06 +#define RTAS_TYPE_CACHE_PARITY 0x07 +#define RTAS_TYPE_ADDR_INVALID 0x08 +#define RTAS_TYPE_ECC_UNCORR 0x09 +#define RTAS_TYPE_ECC_CORR 0x0a +#define RTAS_TYPE_EPOW 0x40 +#define RTAS_TYPE_PLATFORM 0xE0 +#define RTAS_TYPE_IO 0xE1 +#define RTAS_TYPE_INFO 0xE2 +#define RTAS_TYPE_DEALLOC 0xE3 +#define RTAS_TYPE_DUMP 0xE4 +/* I don't add PowerMGM events right now, this is a different topic */ +#define RTAS_TYPE_PMGM_POWER_SW_ON 0x60 +#define RTAS_TYPE_PMGM_POWER_SW_OFF 0x61 +#define RTAS_TYPE_PMGM_LID_OPEN 0x62 +#define RTAS_TYPE_PMGM_LID_CLOSE 0x63 +#define RTAS_TYPE_PMGM_SLEEP_BTN 0x64 +#define RTAS_TYPE_PMGM_WAKE_BTN 0x65 +#define RTAS_TYPE_PMGM_BATTERY_WARN 0x66 +#define RTAS_TYPE_PMGM_BATTERY_CRIT 0x67 +#define RTAS_TYPE_PMGM_SWITCH_TO_BAT 0x68 +#define RTAS_TYPE_PMGM_SWITCH_TO_AC 0x69 +#define RTAS_TYPE_PMGM_KBD_OR_MOUSE 0x6a +#define RTAS_TYPE_PMGM_ENCLOS_OPEN 0x6b +#define RTAS_TYPE_PMGM_ENCLOS_CLOSED 0x6c +#define RTAS_TYPE_PMGM_RING_INDICATE 0x6d +#define RTAS_TYPE_PMGM_LAN_ATTENTION 0x6e +#define RTAS_TYPE_PMGM_TIME_ALARM 0x6f +#define RTAS_TYPE_PMGM_CONFIG_CHANGE 0x70 +#define RTAS_TYPE_PMGM_SERVICE_PROC 0x71 + +struct rtas_error_log { + unsigned long version:8; /* Architectural version */ + unsigned long severity:3; /* Severity level of error */ + unsigned long disposition:2; /* Degree of recovery */ + unsigned long extended:1; /* extended log present? */ + unsigned long /* reserved */ :2; /* Reserved for future use */ + unsigned long initiator:4; /* Initiator of event */ + unsigned long target:4; /* Target of failed operation */ + unsigned long type:8; /* General event or error*/ + unsigned long extended_log_length:32; /* length in bytes */ + unsigned char buffer[1]; +}; + +/* + * This can be set by the rtas_flash module so that it can get called + * as the absolutely last thing before the kernel terminates. + */ +extern void (*rtas_flash_term_hook)(int); + +extern struct rtas_t rtas; + +extern void enter_rtas(unsigned long); +extern int rtas_token(const char *service); +extern int rtas_service_present(const char *service); +extern int rtas_call(int token, int, int, int *, ...); +extern void rtas_restart(char *cmd); +extern void rtas_power_off(void); +extern void rtas_halt(void); +extern void rtas_os_term(char *str); +extern int rtas_get_sensor(int sensor, int index, int *state); +extern int rtas_get_power_level(int powerdomain, int *level); +extern int rtas_set_power_level(int powerdomain, int level, int *setlevel); +extern int rtas_set_indicator(int indicator, int index, int new_value); +extern int rtas_set_indicator_fast(int indicator, int index, int new_value); +extern void rtas_progress(char *s, unsigned short hex); +extern void rtas_initialize(void); + +struct rtc_time; +extern unsigned long rtas_get_boot_time(void); +extern void rtas_get_rtc_time(struct rtc_time *rtc_time); +extern int rtas_set_rtc_time(struct rtc_time *rtc_time); + +extern unsigned int rtas_busy_delay_time(int status); +extern unsigned int rtas_busy_delay(int status); + +extern int early_init_dt_scan_rtas(unsigned long node, + const char *uname, int depth, void *data); + +extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal); + +/* Error types logged. */ +#define ERR_FLAG_ALREADY_LOGGED 0x0 +#define ERR_FLAG_BOOT 0x1 /* log was pulled from NVRAM on boot */ +#define ERR_TYPE_RTAS_LOG 0x2 /* from rtas event-scan */ +#define ERR_TYPE_KERNEL_PANIC 0x4 /* from panic() */ + +/* All the types and not flags */ +#define ERR_TYPE_MASK (ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC) + +#define RTAS_DEBUG KERN_DEBUG "RTAS: " + +#define RTAS_ERROR_LOG_MAX 2048 + +/* + * Return the firmware-specified size of the error log buffer + * for all rtas calls that require an error buffer argument. + * This includes 'check-exception' and 'rtas-last-error'. + */ +extern int rtas_get_error_log_max(void); + +/* Event Scan Parameters */ +#define EVENT_SCAN_ALL_EVENTS 0xf0000000 +#define SURVEILLANCE_TOKEN 9000 +#define LOG_NUMBER 64 /* must be a power of two */ +#define LOG_NUMBER_MASK (LOG_NUMBER-1) + +/* Some RTAS ops require a data buffer and that buffer must be < 4G. + * Rather than having a memory allocator, just use this buffer + * (get the lock first), make the RTAS call. Copy the data instead + * of holding the buffer for long. + */ + +#define RTAS_DATA_BUF_SIZE 4096 +extern spinlock_t rtas_data_buf_lock; +extern char rtas_data_buf[RTAS_DATA_BUF_SIZE]; + +/* RMO buffer reserved for user-space RTAS use */ +extern unsigned long rtas_rmo_buf; + +#define GLOBAL_INTERRUPT_QUEUE 9005 + +/** + * rtas_config_addr - Format a busno, devfn and reg for RTAS. + * @busno: The bus number. + * @devfn: The device and function number as encoded by PCI_DEVFN(). + * @reg: The register number. + * + * This function encodes the given busno, devfn and register number as + * required for RTAS calls that take a "config_addr" parameter. + * See PAPR requirement 7.3.4-1 for more info. + */ +static inline u32 rtas_config_addr(int busno, int devfn, int reg) +{ + return ((reg & 0xf00) << 20) | ((busno & 0xff) << 16) | + (devfn << 8) | (reg & 0xff); +} + +#endif /* __KERNEL__ */ +#endif /* _POWERPC_RTAS_H */ diff --git a/arch/powerpc/include/asm/rtc.h b/arch/powerpc/include/asm/rtc.h new file mode 100644 index 000000000000..f5802926b6c0 --- /dev/null +++ b/arch/powerpc/include/asm/rtc.h @@ -0,0 +1,78 @@ +/* + * Real-time clock definitions and interfaces + * + * Author: Tom Rini + * + * 2002 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Based on: + * include/asm-m68k/rtc.h + * + * Copyright Richard Zidlicky + * implementation details for genrtc/q40rtc driver + * + * And the old drivers/macintosh/rtc.c which was heavily based on: + * Linux/SPARC Real Time Clock Driver + * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) + * + * With additional work by Paul Mackerras and Franz Sirl. + */ + +#ifndef __ASM_POWERPC_RTC_H__ +#define __ASM_POWERPC_RTC_H__ + +#ifdef __KERNEL__ + +#include + +#include +#include + +#define RTC_PIE 0x40 /* periodic interrupt enable */ +#define RTC_AIE 0x20 /* alarm interrupt enable */ +#define RTC_UIE 0x10 /* update-finished interrupt enable */ + +/* some dummy definitions */ +#define RTC_BATT_BAD 0x100 /* battery bad */ +#define RTC_SQWE 0x08 /* enable square-wave output */ +#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ +#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ +#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ + +static inline unsigned int get_rtc_time(struct rtc_time *time) +{ + if (ppc_md.get_rtc_time) + ppc_md.get_rtc_time(time); + return RTC_24H; +} + +/* Set the current date and time in the real time clock. */ +static inline int set_rtc_time(struct rtc_time *time) +{ + if (ppc_md.set_rtc_time) + return ppc_md.set_rtc_time(time); + return -EINVAL; +} + +static inline unsigned int get_rtc_ss(void) +{ + struct rtc_time h; + + get_rtc_time(&h); + return h.tm_sec; +} + +static inline int get_rtc_pll(struct rtc_pll_info *pll) +{ + return -EINVAL; +} +static inline int set_rtc_pll(struct rtc_pll_info *pll) +{ + return -EINVAL; +} + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_RTC_H__ */ diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h new file mode 100644 index 000000000000..24cd9281ec37 --- /dev/null +++ b/arch/powerpc/include/asm/rwsem.h @@ -0,0 +1,173 @@ +#ifndef _ASM_POWERPC_RWSEM_H +#define _ASM_POWERPC_RWSEM_H + +#ifndef _LINUX_RWSEM_H +#error "Please don't include directly, use instead." +#endif + +#ifdef __KERNEL__ + +/* + * R/W semaphores for PPC using the stuff in lib/rwsem.c. + * Adapted largely from include/asm-i386/rwsem.h + * by Paul Mackerras . + */ + +#include +#include +#include +#include + +/* + * the semaphore definition + */ +struct rw_semaphore { + /* XXX this should be able to be an atomic_t -- paulus */ + signed int count; +#define RWSEM_UNLOCKED_VALUE 0x00000000 +#define RWSEM_ACTIVE_BIAS 0x00000001 +#define RWSEM_ACTIVE_MASK 0x0000ffff +#define RWSEM_WAITING_BIAS (-0x00010000) +#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS +#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) + spinlock_t wait_lock; + struct list_head wait_list; +#ifdef CONFIG_DEBUG_LOCK_ALLOC + struct lockdep_map dep_map; +#endif +}; + +#ifdef CONFIG_DEBUG_LOCK_ALLOC +# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } +#else +# define __RWSEM_DEP_MAP_INIT(lockname) +#endif + +#define __RWSEM_INITIALIZER(name) \ + { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ + LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) } + +#define DECLARE_RWSEM(name) \ + struct rw_semaphore name = __RWSEM_INITIALIZER(name) + +extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); + +extern void __init_rwsem(struct rw_semaphore *sem, const char *name, + struct lock_class_key *key); + +#define init_rwsem(sem) \ + do { \ + static struct lock_class_key __key; \ + \ + __init_rwsem((sem), #sem, &__key); \ + } while (0) + +/* + * lock for reading + */ +static inline void __down_read(struct rw_semaphore *sem) +{ + if (unlikely(atomic_inc_return((atomic_t *)(&sem->count)) <= 0)) + rwsem_down_read_failed(sem); +} + +static inline int __down_read_trylock(struct rw_semaphore *sem) +{ + int tmp; + + while ((tmp = sem->count) >= 0) { + if (tmp == cmpxchg(&sem->count, tmp, + tmp + RWSEM_ACTIVE_READ_BIAS)) { + return 1; + } + } + return 0; +} + +/* + * lock for writing + */ +static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) +{ + int tmp; + + tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS, + (atomic_t *)(&sem->count)); + if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS)) + rwsem_down_write_failed(sem); +} + +static inline void __down_write(struct rw_semaphore *sem) +{ + __down_write_nested(sem, 0); +} + +static inline int __down_write_trylock(struct rw_semaphore *sem) +{ + int tmp; + + tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE, + RWSEM_ACTIVE_WRITE_BIAS); + return tmp == RWSEM_UNLOCKED_VALUE; +} + +/* + * unlock after reading + */ +static inline void __up_read(struct rw_semaphore *sem) +{ + int tmp; + + tmp = atomic_dec_return((atomic_t *)(&sem->count)); + if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)) + rwsem_wake(sem); +} + +/* + * unlock after writing + */ +static inline void __up_write(struct rw_semaphore *sem) +{ + if (unlikely(atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS, + (atomic_t *)(&sem->count)) < 0)) + rwsem_wake(sem); +} + +/* + * implement atomic add functionality + */ +static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) +{ + atomic_add(delta, (atomic_t *)(&sem->count)); +} + +/* + * downgrade write lock to read lock + */ +static inline void __downgrade_write(struct rw_semaphore *sem) +{ + int tmp; + + tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count)); + if (tmp < 0) + rwsem_downgrade_wake(sem); +} + +/* + * implement exchange and add functionality + */ +static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) +{ + return atomic_add_return(delta, (atomic_t *)(&sem->count)); +} + +static inline int rwsem_is_locked(struct rw_semaphore *sem) +{ + return (sem->count != 0); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_RWSEM_H */ diff --git a/arch/powerpc/include/asm/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h new file mode 100644 index 000000000000..fcf7d55afe45 --- /dev/null +++ b/arch/powerpc/include/asm/scatterlist.h @@ -0,0 +1,50 @@ +#ifndef _ASM_POWERPC_SCATTERLIST_H +#define _ASM_POWERPC_SCATTERLIST_H +/* + * Copyright (C) 2001 PPC64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __KERNEL__ +#include +#include + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + unsigned int length; + + /* For TCE support */ + dma_addr_t dma_address; + u32 dma_length; +}; + +/* + * These macros should be used after a dma_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#ifdef __powerpc64__ +#define sg_dma_len(sg) ((sg)->dma_length) +#else +#define sg_dma_len(sg) ((sg)->length) +#endif + +#ifdef __powerpc64__ +#define ISA_DMA_THRESHOLD (~0UL) +#endif + +#define ARCH_HAS_SG_CHAIN + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SCATTERLIST_H */ diff --git a/arch/powerpc/include/asm/seccomp.h b/arch/powerpc/include/asm/seccomp.h new file mode 100644 index 000000000000..853765eb1f65 --- /dev/null +++ b/arch/powerpc/include/asm/seccomp.h @@ -0,0 +1,20 @@ +#ifndef _ASM_POWERPC_SECCOMP_H +#define _ASM_POWERPC_SECCOMP_H + +#ifdef __KERNEL__ +#include +#endif + +#include + +#define __NR_seccomp_read __NR_read +#define __NR_seccomp_write __NR_write +#define __NR_seccomp_exit __NR_exit +#define __NR_seccomp_sigreturn __NR_rt_sigreturn + +#define __NR_seccomp_read_32 __NR_read +#define __NR_seccomp_write_32 __NR_write +#define __NR_seccomp_exit_32 __NR_exit +#define __NR_seccomp_sigreturn_32 __NR_sigreturn + +#endif /* _ASM_POWERPC_SECCOMP_H */ diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h new file mode 100644 index 000000000000..916018e425c4 --- /dev/null +++ b/arch/powerpc/include/asm/sections.h @@ -0,0 +1,22 @@ +#ifndef _ASM_POWERPC_SECTIONS_H +#define _ASM_POWERPC_SECTIONS_H +#ifdef __KERNEL__ + +#include + +#ifdef __powerpc64__ + +extern char _end[]; + +static inline int in_kernel_text(unsigned long addr) +{ + if (addr >= (unsigned long)_stext && addr < (unsigned long)__init_end) + return 1; + + return 0; +} + +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SECTIONS_H */ diff --git a/arch/powerpc/include/asm/sembuf.h b/arch/powerpc/include/asm/sembuf.h new file mode 100644 index 000000000000..99a41938ae3d --- /dev/null +++ b/arch/powerpc/include/asm/sembuf.h @@ -0,0 +1,36 @@ +#ifndef _ASM_POWERPC_SEMBUF_H +#define _ASM_POWERPC_SEMBUF_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* + * The semid64_ds structure for PPC architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ +#ifndef __powerpc64__ + unsigned long __unused1; +#endif + __kernel_time_t sem_otime; /* last semop time */ +#ifndef __powerpc64__ + unsigned long __unused2; +#endif + __kernel_time_t sem_ctime; /* last change time */ + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_POWERPC_SEMBUF_H */ diff --git a/arch/powerpc/include/asm/serial.h b/arch/powerpc/include/asm/serial.h new file mode 100644 index 000000000000..3e8589b43cb2 --- /dev/null +++ b/arch/powerpc/include/asm/serial.h @@ -0,0 +1,24 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_POWERPC_SERIAL_H +#define _ASM_POWERPC_SERIAL_H + +/* + * Serial ports are not listed here, because they are discovered + * through the device tree. + */ + +/* Default baud base if not found in device-tree */ +#define BASE_BAUD ( 1843200 / 16 ) + +#ifdef CONFIG_PPC_UDBG_16550 +extern void find_legacy_serial_ports(void); +#else +#define find_legacy_serial_ports() do { } while (0) +#endif + +#endif /* _PPC64_SERIAL_H */ diff --git a/arch/powerpc/include/asm/setjmp.h b/arch/powerpc/include/asm/setjmp.h new file mode 100644 index 000000000000..279d03a1eec6 --- /dev/null +++ b/arch/powerpc/include/asm/setjmp.h @@ -0,0 +1,18 @@ +/* + * Copyright © 2008 Michael Neuling IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#ifndef _ASM_POWERPC_SETJMP_H +#define _ASM_POWERPC_SETJMP_H + +#define JMP_BUF_LEN 23 + +extern long setjmp(long *); +extern void longjmp(long *, long); + +#endif /* _ASM_POWERPC_SETJMP_H */ diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h new file mode 100644 index 000000000000..817fac0a0714 --- /dev/null +++ b/arch/powerpc/include/asm/setup.h @@ -0,0 +1,6 @@ +#ifndef _ASM_POWERPC_SETUP_H +#define _ASM_POWERPC_SETUP_H + +#define COMMAND_LINE_SIZE 512 + +#endif /* _ASM_POWERPC_SETUP_H */ diff --git a/arch/powerpc/include/asm/shmbuf.h b/arch/powerpc/include/asm/shmbuf.h new file mode 100644 index 000000000000..8efa39698b6c --- /dev/null +++ b/arch/powerpc/include/asm/shmbuf.h @@ -0,0 +1,59 @@ +#ifndef _ASM_POWERPC_SHMBUF_H +#define _ASM_POWERPC_SHMBUF_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* + * The shmid64_ds structure for PPC architecture. + * + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ +#ifndef __powerpc64__ + unsigned long __unused1; +#endif + __kernel_time_t shm_atime; /* last attach time */ +#ifndef __powerpc64__ + unsigned long __unused2; +#endif + __kernel_time_t shm_dtime; /* last detach time */ +#ifndef __powerpc64__ + unsigned long __unused3; +#endif + __kernel_time_t shm_ctime; /* last change time */ +#ifndef __powerpc64__ + unsigned long __unused4; +#endif + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused5; + unsigned long __unused6; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_POWERPC_SHMBUF_H */ diff --git a/arch/powerpc/include/asm/shmparam.h b/arch/powerpc/include/asm/shmparam.h new file mode 100644 index 000000000000..5cda42a6d39e --- /dev/null +++ b/arch/powerpc/include/asm/shmparam.h @@ -0,0 +1,6 @@ +#ifndef _ASM_POWERPC_SHMPARAM_H +#define _ASM_POWERPC_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASM_POWERPC_SHMPARAM_H */ diff --git a/arch/powerpc/include/asm/sigcontext.h b/arch/powerpc/include/asm/sigcontext.h new file mode 100644 index 000000000000..9c1f24fd5d11 --- /dev/null +++ b/arch/powerpc/include/asm/sigcontext.h @@ -0,0 +1,87 @@ +#ifndef _ASM_POWERPC_SIGCONTEXT_H +#define _ASM_POWERPC_SIGCONTEXT_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#ifdef __powerpc64__ +#include +#endif + +struct sigcontext { + unsigned long _unused[4]; + int signal; +#ifdef __powerpc64__ + int _pad0; +#endif + unsigned long handler; + unsigned long oldmask; + struct pt_regs __user *regs; +#ifdef __powerpc64__ + elf_gregset_t gp_regs; + elf_fpregset_t fp_regs; +/* + * To maintain compatibility with current implementations the sigcontext is + * extended by appending a pointer (v_regs) to a quadword type (elf_vrreg_t) + * followed by an unstructured (vmx_reserve) field of 69 doublewords. This + * allows the array of vector registers to be quadword aligned independent of + * the alignment of the containing sigcontext or ucontext. It is the + * responsibility of the code setting the sigcontext to set this pointer to + * either NULL (if this processor does not support the VMX feature) or the + * address of the first quadword within the allocated (vmx_reserve) area. + * + * The pointer (v_regs) of vector type (elf_vrreg_t) is type compatible with + * an array of 34 quadword entries (elf_vrregset_t). The entries with + * indexes 0-31 contain the corresponding vector registers. The entry with + * index 32 contains the vscr as the last word (offset 12) within the + * quadword. This allows the vscr to be stored as either a quadword (since + * it must be copied via a vector register to/from storage) or as a word. + * The entry with index 33 contains the vrsave as the first word (offset 0) + * within the quadword. + * + * Part of the VSX data is stored here also by extending vmx_restore + * by an additional 32 double words. Architecturally the layout of + * the VSR registers and how they overlap on top of the legacy FPR and + * VR registers is shown below: + * + * VSR doubleword 0 VSR doubleword 1 + * ---------------------------------------------------------------- + * VSR[0] | FPR[0] | | + * ---------------------------------------------------------------- + * VSR[1] | FPR[1] | | + * ---------------------------------------------------------------- + * | ... | | + * | ... | | + * ---------------------------------------------------------------- + * VSR[30] | FPR[30] | | + * ---------------------------------------------------------------- + * VSR[31] | FPR[31] | | + * ---------------------------------------------------------------- + * VSR[32] | VR[0] | + * ---------------------------------------------------------------- + * VSR[33] | VR[1] | + * ---------------------------------------------------------------- + * | ... | + * | ... | + * ---------------------------------------------------------------- + * VSR[62] | VR[30] | + * ---------------------------------------------------------------- + * VSR[63] | VR[31] | + * ---------------------------------------------------------------- + * + * FPR/VSR 0-31 doubleword 0 is stored in fp_regs, and VMX/VSR 32-63 + * is stored at the start of vmx_reserve. vmx_reserve is extended for + * backwards compatility to store VSR 0-31 doubleword 1 after the VMX + * registers and vscr/vrsave. + */ + elf_vrreg_t __user *v_regs; + long vmx_reserve[ELF_NVRREG+ELF_NVRREG+32+1]; +#endif +}; + +#endif /* _ASM_POWERPC_SIGCONTEXT_H */ diff --git a/arch/powerpc/include/asm/siginfo.h b/arch/powerpc/include/asm/siginfo.h new file mode 100644 index 000000000000..12f1bce037be --- /dev/null +++ b/arch/powerpc/include/asm/siginfo.h @@ -0,0 +1,26 @@ +#ifndef _ASM_POWERPC_SIGINFO_H +#define _ASM_POWERPC_SIGINFO_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __powerpc64__ +# define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) +# define SI_PAD_SIZE32 ((SI_MAX_SIZE/sizeof(int)) - 3) +#endif + +#include + +/* + * SIGTRAP si_codes + */ +#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */ +#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint or watchpoint */ +#undef NSIGTRAP +#define NSIGTRAP 4 + +#endif /* _ASM_POWERPC_SIGINFO_H */ diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h new file mode 100644 index 000000000000..a7360cdd99eb --- /dev/null +++ b/arch/powerpc/include/asm/signal.h @@ -0,0 +1,150 @@ +#ifndef _ASM_POWERPC_SIGNAL_H +#define _ASM_POWERPC_SIGNAL_H + +#include + +#define _NSIG 64 +#ifdef __powerpc64__ +#define _NSIG_BPW 64 +#else +#define _NSIG_BPW 32 +#endif +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK is not currently supported, but will allow sigaltstack(2). + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001U +#define SA_NOCLDWAIT 0x00000002U +#define SA_SIGINFO 0x00000004U +#define SA_ONSTACK 0x08000000U +#define SA_RESTART 0x10000000U +#define SA_NODEFER 0x40000000U +#define SA_RESETHAND 0x80000000U + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000U + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + __sigrestore_t sa_restorer; +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + __sigrestore_t sa_restorer; + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +struct pt_regs; +extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags); +#define ptrace_signal_deliver(regs, cookie) do { } while (0) +#endif /* __KERNEL__ */ + +#ifndef __powerpc64__ +/* + * These are parameters to dbg_sigreturn syscall. They enable or + * disable certain debugging things that can be done from signal + * handlers. The dbg_sigreturn syscall *must* be called from a + * SA_SIGINFO signal so the ucontext can be passed to it. It takes an + * array of struct sig_dbg_op, which has the debug operations to + * perform before returning from the signal. + */ +struct sig_dbg_op { + int dbg_type; + unsigned long dbg_value; +}; + +/* Enable or disable single-stepping. The value sets the state. */ +#define SIG_DBG_SINGLE_STEPPING 1 + +/* Enable or disable branch tracing. The value sets the state. */ +#define SIG_DBG_BRANCH_TRACING 2 +#endif /* ! __powerpc64__ */ + +#endif /* _ASM_POWERPC_SIGNAL_H */ diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h new file mode 100644 index 000000000000..4d28e1e4521b --- /dev/null +++ b/arch/powerpc/include/asm/smp.h @@ -0,0 +1,127 @@ +/* + * smp.h: PowerPC-specific SMP code. + * + * Original was a copy of sparc smp.h. Now heavily modified + * for PPC. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996-2001 Cort Dougan + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_POWERPC_SMP_H +#define _ASM_POWERPC_SMP_H +#ifdef __KERNEL__ + +#include +#include +#include + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_PPC64 +#include +#endif +#include + +extern int boot_cpuid; + +extern void cpu_die(void); + +#ifdef CONFIG_SMP + +extern void smp_send_debugger_break(int cpu); +extern void smp_message_recv(int); + +DECLARE_PER_CPU(unsigned int, pvr); + +#ifdef CONFIG_HOTPLUG_CPU +extern void fixup_irqs(cpumask_t map); +int generic_cpu_disable(void); +int generic_cpu_enable(unsigned int cpu); +void generic_cpu_die(unsigned int cpu); +void generic_mach_cpu_die(void); +#endif + +#ifdef CONFIG_PPC64 +#define raw_smp_processor_id() (local_paca->paca_index) +#define hard_smp_processor_id() (get_paca()->hw_cpu_id) +#else +/* 32-bit */ +extern int smp_hw_index[]; + +#define raw_smp_processor_id() (current_thread_info()->cpu) +#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()]) +#define get_hard_smp_processor_id(cpu) (smp_hw_index[(cpu)]) +#define set_hard_smp_processor_id(cpu, phys)\ + (smp_hw_index[(cpu)] = (phys)) +#endif + +DECLARE_PER_CPU(cpumask_t, cpu_sibling_map); +DECLARE_PER_CPU(cpumask_t, cpu_core_map); +extern int cpu_to_core_id(int cpu); + +/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers. + * + * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up + * in /proc/interrupts will be wrong!!! --Troy */ +#define PPC_MSG_CALL_FUNCTION 0 +#define PPC_MSG_RESCHEDULE 1 +#define PPC_MSG_CALL_FUNC_SINGLE 2 +#define PPC_MSG_DEBUGGER_BREAK 3 + +void smp_init_iSeries(void); +void smp_init_pSeries(void); +void smp_init_cell(void); +void smp_init_celleb(void); +void smp_setup_cpu_maps(void); +void smp_setup_cpu_sibling_map(void); + +extern int __cpu_disable(void); +extern void __cpu_die(unsigned int cpu); + +#else +/* for UP */ +#define hard_smp_processor_id() 0 +#define smp_setup_cpu_maps() + +#endif /* CONFIG_SMP */ + +#ifdef CONFIG_PPC64 +#define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id) +#define set_hard_smp_processor_id(CPU, VAL) \ + do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0) + +extern void smp_release_cpus(void); + +#else +/* 32-bit */ +#ifndef CONFIG_SMP +extern int boot_cpuid_phys; +#define get_hard_smp_processor_id(cpu) boot_cpuid_phys +#define set_hard_smp_processor_id(cpu, phys) +#endif +#endif + +extern int smt_enabled_at_boot; + +extern int smp_mpic_probe(void); +extern void smp_mpic_setup_cpu(int cpu); +extern void smp_generic_kick_cpu(int nr); + +extern void smp_generic_give_timebase(void); +extern void smp_generic_take_timebase(void); + +extern struct smp_ops_t *smp_ops; + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi(cpumask_t mask); + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SMP_H) */ diff --git a/arch/powerpc/include/asm/smu.h b/arch/powerpc/include/asm/smu.h new file mode 100644 index 000000000000..7ae2753da565 --- /dev/null +++ b/arch/powerpc/include/asm/smu.h @@ -0,0 +1,700 @@ +#ifndef _SMU_H +#define _SMU_H + +/* + * Definitions for talking to the SMU chip in newer G5 PowerMacs + */ +#ifdef __KERNEL__ +#include +#endif +#include + +/* + * Known SMU commands + * + * Most of what is below comes from looking at the Open Firmware driver, + * though this is still incomplete and could use better documentation here + * or there... + */ + + +/* + * Partition info commands + * + * These commands are used to retrieve the sdb-partition-XX datas from + * the SMU. The length is always 2. First byte is the subcommand code + * and second byte is the partition ID. + * + * The reply is 6 bytes: + * + * - 0..1 : partition address + * - 2 : a byte containing the partition ID + * - 3 : length (maybe other bits are rest of header ?) + * + * The data must then be obtained with calls to another command: + * SMU_CMD_MISC_ee_GET_DATABLOCK_REC (described below). + */ +#define SMU_CMD_PARTITION_COMMAND 0x3e +#define SMU_CMD_PARTITION_LATEST 0x01 +#define SMU_CMD_PARTITION_BASE 0x02 +#define SMU_CMD_PARTITION_UPDATE 0x03 + + +/* + * Fan control + * + * This is a "mux" for fan control commands. The command seem to + * act differently based on the number of arguments. With 1 byte + * of argument, this seem to be queries for fans status, setpoint, + * etc..., while with 0xe arguments, we will set the fans speeds. + * + * Queries (1 byte arg): + * --------------------- + * + * arg=0x01: read RPM fans status + * arg=0x02: read RPM fans setpoint + * arg=0x11: read PWM fans status + * arg=0x12: read PWM fans setpoint + * + * the "status" queries return the current speed while the "setpoint" ones + * return the programmed/target speed. It _seems_ that the result is a bit + * mask in the first byte of active/available fans, followed by 6 words (16 + * bits) containing the requested speed. + * + * Setpoint (14 bytes arg): + * ------------------------ + * + * first arg byte is 0 for RPM fans and 0x10 for PWM. Second arg byte is the + * mask of fans affected by the command. Followed by 6 words containing the + * setpoint value for selected fans in the mask (or 0 if mask value is 0) + */ +#define SMU_CMD_FAN_COMMAND 0x4a + + +/* + * Battery access + * + * Same command number as the PMU, could it be same syntax ? + */ +#define SMU_CMD_BATTERY_COMMAND 0x6f +#define SMU_CMD_GET_BATTERY_INFO 0x00 + +/* + * Real time clock control + * + * This is a "mux", first data byte contains the "sub" command. + * The "RTC" part of the SMU controls the date, time, powerup + * timer, but also a PRAM + * + * Dates are in BCD format on 7 bytes: + * [sec] [min] [hour] [weekday] [month day] [month] [year] + * with month being 1 based and year minus 100 + */ +#define SMU_CMD_RTC_COMMAND 0x8e +#define SMU_CMD_RTC_SET_PWRUP_TIMER 0x00 /* i: 7 bytes date */ +#define SMU_CMD_RTC_GET_PWRUP_TIMER 0x01 /* o: 7 bytes date */ +#define SMU_CMD_RTC_STOP_PWRUP_TIMER 0x02 +#define SMU_CMD_RTC_SET_PRAM_BYTE_ACC 0x20 /* i: 1 byte (address?) */ +#define SMU_CMD_RTC_SET_PRAM_AUTOINC 0x21 /* i: 1 byte (data?) */ +#define SMU_CMD_RTC_SET_PRAM_LO_BYTES 0x22 /* i: 10 bytes */ +#define SMU_CMD_RTC_SET_PRAM_HI_BYTES 0x23 /* i: 10 bytes */ +#define SMU_CMD_RTC_GET_PRAM_BYTE 0x28 /* i: 1 bytes (address?) */ +#define SMU_CMD_RTC_GET_PRAM_LO_BYTES 0x29 /* o: 10 bytes */ +#define SMU_CMD_RTC_GET_PRAM_HI_BYTES 0x2a /* o: 10 bytes */ +#define SMU_CMD_RTC_SET_DATETIME 0x80 /* i: 7 bytes date */ +#define SMU_CMD_RTC_GET_DATETIME 0x81 /* o: 7 bytes date */ + + /* + * i2c commands + * + * To issue an i2c command, first is to send a parameter block to the + * the SMU. This is a command of type 0x9a with 9 bytes of header + * eventually followed by data for a write: + * + * 0: bus number (from device-tree usually, SMU has lots of busses !) + * 1: transfer type/format (see below) + * 2: device address. For combined and combined4 type transfers, this + * is the "write" version of the address (bit 0x01 cleared) + * 3: subaddress length (0..3) + * 4: subaddress byte 0 (or only byte for subaddress length 1) + * 5: subaddress byte 1 + * 6: subaddress byte 2 + * 7: combined address (device address for combined mode data phase) + * 8: data length + * + * The transfer types are the same good old Apple ones it seems, + * that is: + * - 0x00: Simple transfer + * - 0x01: Subaddress transfer (addr write + data tx, no restart) + * - 0x02: Combined transfer (addr write + restart + data tx) + * + * This is then followed by actual data for a write. + * + * At this point, the OF driver seems to have a limitation on transfer + * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know + * wether this is just an OF limit due to some temporary buffer size + * or if this is an SMU imposed limit. This driver has the same limitation + * for now as I use a 0x10 bytes temporary buffer as well + * + * Once that is completed, a response is expected from the SMU. This is + * obtained via a command of type 0x9a with a length of 1 byte containing + * 0 as the data byte. OF also fills the rest of the data buffer with 0xff's + * though I can't tell yet if this is actually necessary. Once this command + * is complete, at this point, all I can tell is what OF does. OF tests + * byte 0 of the reply: + * - on read, 0xfe or 0xfc : bus is busy, wait (see below) or nak ? + * - on read, 0x00 or 0x01 : reply is in buffer (after the byte 0) + * - on write, < 0 -> failure (immediate exit) + * - else, OF just exists (without error, weird) + * + * So on read, there is this wait-for-busy thing when getting a 0xfc or + * 0xfe result. OF does a loop of up to 64 retries, waiting 20ms and + * doing the above again until either the retries expire or the result + * is no longer 0xfe or 0xfc + * + * The Darwin I2C driver is less subtle though. On any non-success status + * from the response command, it waits 5ms and tries again up to 20 times, + * it doesn't differenciate between fatal errors or "busy" status. + * + * This driver provides an asynchronous paramblock based i2c command + * interface to be used either directly by low level code or by a higher + * level driver interfacing to the linux i2c layer. The current + * implementation of this relies on working timers & timer interrupts + * though, so be careful of calling context for now. This may be "fixed" + * in the future by adding a polling facility. + */ +#define SMU_CMD_I2C_COMMAND 0x9a + /* transfer types */ +#define SMU_I2C_TRANSFER_SIMPLE 0x00 +#define SMU_I2C_TRANSFER_STDSUB 0x01 +#define SMU_I2C_TRANSFER_COMBINED 0x02 + +/* + * Power supply control + * + * The "sub" command is an ASCII string in the data, the + * data length is that of the string. + * + * The VSLEW command can be used to get or set the voltage slewing. + * - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of + * reply at data offset 6, 7 and 8. + * - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is + * used to set the voltage slewing point. The SMU replies with "DONE" + * I yet have to figure out their exact meaning of those 3 bytes in + * both cases. They seem to be: + * x = processor mask + * y = op. point index + * z = processor freq. step index + * I haven't yet decyphered result codes + * + */ +#define SMU_CMD_POWER_COMMAND 0xaa +#define SMU_CMD_POWER_RESTART "RESTART" +#define SMU_CMD_POWER_SHUTDOWN "SHUTDOWN" +#define SMU_CMD_POWER_VOLTAGE_SLEW "VSLEW" + +/* + * Read ADC sensors + * + * This command takes one byte of parameter: the sensor ID (or "reg" + * value in the device-tree) and returns a 16 bits value + */ +#define SMU_CMD_READ_ADC 0xd8 + + +/* Misc commands + * + * This command seem to be a grab bag of various things + * + * Parameters: + * 1: subcommand + */ +#define SMU_CMD_MISC_df_COMMAND 0xdf + +/* + * Sets "system ready" status + * + * I did not yet understand how it exactly works or what it does. + * + * Guessing from OF code, 0x02 activates the display backlight. Apple uses/used + * the same codebase for all OF versions. On PowerBooks, this command would + * enable the backlight. For the G5s, it only activates the front LED. However, + * don't take this for granted. + * + * Parameters: + * 2: status [0x00, 0x01 or 0x02] + */ +#define SMU_CMD_MISC_df_SET_DISPLAY_LIT 0x02 + +/* + * Sets mode of power switch. + * + * What this actually does is not yet known. Maybe it enables some interrupt. + * + * Parameters: + * 2: enable power switch? [0x00 or 0x01] + * 3 (optional): enable nmi? [0x00 or 0x01] + * + * Returns: + * If parameter 2 is 0x00 and parameter 3 is not specified, returns wether + * NMI is enabled. Otherwise unknown. + */ +#define SMU_CMD_MISC_df_NMI_OPTION 0x04 + +/* Sets LED dimm offset. + * + * The front LED dimms itself during sleep. Its brightness (or, well, the PWM + * frequency) depends on current time. Therefore, the SMU needs to know the + * timezone. + * + * Parameters: + * 2-8: unknown (BCD coding) + */ +#define SMU_CMD_MISC_df_DIMM_OFFSET 0x99 + + +/* + * Version info commands + * + * Parameters: + * 1 (optional): Specifies version part to retrieve + * + * Returns: + * Version value + */ +#define SMU_CMD_VERSION_COMMAND 0xea +#define SMU_VERSION_RUNNING 0x00 +#define SMU_VERSION_BASE 0x01 +#define SMU_VERSION_UPDATE 0x02 + + +/* + * Switches + * + * These are switches whose status seems to be known to the SMU. + * + * Parameters: + * none + * + * Result: + * Switch bits (ORed, see below) + */ +#define SMU_CMD_SWITCHES 0xdc + +/* Switches bits */ +#define SMU_SWITCH_CASE_CLOSED 0x01 +#define SMU_SWITCH_AC_POWER 0x04 +#define SMU_SWITCH_POWER_SWITCH 0x08 + + +/* + * Misc commands + * + * This command seem to be a grab bag of various things + * + * SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to + * transfer blocks of data from the SMU. So far, I've decrypted it's + * usage to retrieve partition data. In order to do that, you have to + * break your transfer in "chunks" since that command cannot transfer + * more than a chunk at a time. The chunk size used by OF is 0xe bytes, + * but it seems that the darwin driver will let you do 0x1e bytes if + * your "PMU" version is >= 0x30. You can get the "PMU" version apparently + * either in the last 16 bits of property "smu-version-pmu" or as the 16 + * bytes at offset 1 of "smu-version-info" + * + * For each chunk, the command takes 7 bytes of arguments: + * byte 0: subcommand code (0x02) + * byte 1: 0x04 (always, I don't know what it means, maybe the address + * space to use or some other nicety. It's hard coded in OF) + * byte 2..5: SMU address of the chunk (big endian 32 bits) + * byte 6: size to transfer (up to max chunk size) + * + * The data is returned directly + */ +#define SMU_CMD_MISC_ee_COMMAND 0xee +#define SMU_CMD_MISC_ee_GET_DATABLOCK_REC 0x02 + +/* Retrieves currently used watts. + * + * Parameters: + * 1: 0x03 (Meaning unknown) + */ +#define SMU_CMD_MISC_ee_GET_WATTS 0x03 + +#define SMU_CMD_MISC_ee_LEDS_CTRL 0x04 /* i: 00 (00,01) [00] */ +#define SMU_CMD_MISC_ee_GET_DATA 0x05 /* i: 00 , o: ?? */ + + +/* + * Power related commands + * + * Parameters: + * 1: subcommand + */ +#define SMU_CMD_POWER_EVENTS_COMMAND 0x8f + +/* SMU_POWER_EVENTS subcommands */ +enum { + SMU_PWR_GET_POWERUP_EVENTS = 0x00, + SMU_PWR_SET_POWERUP_EVENTS = 0x01, + SMU_PWR_CLR_POWERUP_EVENTS = 0x02, + SMU_PWR_GET_WAKEUP_EVENTS = 0x03, + SMU_PWR_SET_WAKEUP_EVENTS = 0x04, + SMU_PWR_CLR_WAKEUP_EVENTS = 0x05, + + /* + * Get last shutdown cause + * + * Returns: + * 1 byte (signed char): Last shutdown cause. Exact meaning unknown. + */ + SMU_PWR_LAST_SHUTDOWN_CAUSE = 0x07, + + /* + * Sets or gets server ID. Meaning or use is unknown. + * + * Parameters: + * 2 (optional): Set server ID (1 byte) + * + * Returns: + * 1 byte (server ID?) + */ + SMU_PWR_SERVER_ID = 0x08, +}; + +/* Power events wakeup bits */ +enum { + SMU_PWR_WAKEUP_KEY = 0x01, /* Wake on key press */ + SMU_PWR_WAKEUP_AC_INSERT = 0x02, /* Wake on AC adapter plug */ + SMU_PWR_WAKEUP_AC_CHANGE = 0x04, + SMU_PWR_WAKEUP_LID_OPEN = 0x08, + SMU_PWR_WAKEUP_RING = 0x10, +}; + + +/* + * - Kernel side interface - + */ + +#ifdef __KERNEL__ + +/* + * Asynchronous SMU commands + * + * Fill up this structure and submit it via smu_queue_command(), + * and get notified by the optional done() callback, or because + * status becomes != 1 + */ + +struct smu_cmd; + +struct smu_cmd +{ + /* public */ + u8 cmd; /* command */ + int data_len; /* data len */ + int reply_len; /* reply len */ + void *data_buf; /* data buffer */ + void *reply_buf; /* reply buffer */ + int status; /* command status */ + void (*done)(struct smu_cmd *cmd, void *misc); + void *misc; + + /* private */ + struct list_head link; +}; + +/* + * Queues an SMU command, all fields have to be initialized + */ +extern int smu_queue_cmd(struct smu_cmd *cmd); + +/* + * Simple command wrapper. This structure embeds a small buffer + * to ease sending simple SMU commands from the stack + */ +struct smu_simple_cmd +{ + struct smu_cmd cmd; + u8 buffer[16]; +}; + +/* + * Queues a simple command. All fields will be initialized by that + * function + */ +extern int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command, + unsigned int data_len, + void (*done)(struct smu_cmd *cmd, void *misc), + void *misc, + ...); + +/* + * Completion helper. Pass it to smu_queue_simple or as 'done' + * member to smu_queue_cmd, it will call complete() on the struct + * completion passed in the "misc" argument + */ +extern void smu_done_complete(struct smu_cmd *cmd, void *misc); + +/* + * Synchronous helpers. Will spin-wait for completion of a command + */ +extern void smu_spinwait_cmd(struct smu_cmd *cmd); + +static inline void smu_spinwait_simple(struct smu_simple_cmd *scmd) +{ + smu_spinwait_cmd(&scmd->cmd); +} + +/* + * Poll routine to call if blocked with irqs off + */ +extern void smu_poll(void); + + +/* + * Init routine, presence check.... + */ +extern int smu_init(void); +extern int smu_present(void); +struct of_device; +extern struct of_device *smu_get_ofdev(void); + + +/* + * Common command wrappers + */ +extern void smu_shutdown(void); +extern void smu_restart(void); +struct rtc_time; +extern int smu_get_rtc_time(struct rtc_time *time, int spinwait); +extern int smu_set_rtc_time(struct rtc_time *time, int spinwait); + +/* + * SMU command buffer absolute address, exported by pmac_setup, + * this is allocated very early during boot. + */ +extern unsigned long smu_cmdbuf_abs; + + +/* + * Kenrel asynchronous i2c interface + */ + +#define SMU_I2C_READ_MAX 0x1d +#define SMU_I2C_WRITE_MAX 0x15 + +/* SMU i2c header, exactly matches i2c header on wire */ +struct smu_i2c_param +{ + u8 bus; /* SMU bus ID (from device tree) */ + u8 type; /* i2c transfer type */ + u8 devaddr; /* device address (includes direction) */ + u8 sublen; /* subaddress length */ + u8 subaddr[3]; /* subaddress */ + u8 caddr; /* combined address, filled by SMU driver */ + u8 datalen; /* length of transfer */ + u8 data[SMU_I2C_READ_MAX]; /* data */ +}; + +struct smu_i2c_cmd +{ + /* public */ + struct smu_i2c_param info; + void (*done)(struct smu_i2c_cmd *cmd, void *misc); + void *misc; + int status; /* 1 = pending, 0 = ok, <0 = fail */ + + /* private */ + struct smu_cmd scmd; + int read; + int stage; + int retries; + u8 pdata[32]; + struct list_head link; +}; + +/* + * Call this to queue an i2c command to the SMU. You must fill info, + * including info.data for a write, done and misc. + * For now, no polling interface is provided so you have to use completion + * callback. + */ +extern int smu_queue_i2c(struct smu_i2c_cmd *cmd); + + +#endif /* __KERNEL__ */ + + +/* + * - SMU "sdb" partitions informations - + */ + + +/* + * Partition header format + */ +struct smu_sdbp_header { + __u8 id; + __u8 len; + __u8 version; + __u8 flags; +}; + + + /* + * demangle 16 and 32 bits integer in some SMU partitions + * (currently, afaik, this concerns only the FVT partition + * (0x12) + */ +#define SMU_U16_MIX(x) le16_to_cpu(x); +#define SMU_U32_MIX(x) ((((x) & 0xff00ff00u) >> 8)|(((x) & 0x00ff00ffu) << 8)) + + +/* This is the definition of the SMU sdb-partition-0x12 table (called + * CPU F/V/T operating points in Darwin). The definition for all those + * SMU tables should be moved to some separate file + */ +#define SMU_SDB_FVT_ID 0x12 + +struct smu_sdbp_fvt { + __u32 sysclk; /* Base SysClk frequency in Hz for + * this operating point. Value need to + * be unmixed with SMU_U32_MIX() + */ + __u8 pad; + __u8 maxtemp; /* Max temp. supported by this + * operating point + */ + + __u16 volts[3]; /* CPU core voltage for the 3 + * PowerTune modes, a mode with + * 0V = not supported. Value need + * to be unmixed with SMU_U16_MIX() + */ +}; + +/* This partition contains voltage & current sensor calibration + * informations + */ +#define SMU_SDB_CPUVCP_ID 0x21 + +struct smu_sdbp_cpuvcp { + __u16 volt_scale; /* u4.12 fixed point */ + __s16 volt_offset; /* s4.12 fixed point */ + __u16 curr_scale; /* u4.12 fixed point */ + __s16 curr_offset; /* s4.12 fixed point */ + __s32 power_quads[3]; /* s4.28 fixed point */ +}; + +/* This partition contains CPU thermal diode calibration + */ +#define SMU_SDB_CPUDIODE_ID 0x18 + +struct smu_sdbp_cpudiode { + __u16 m_value; /* u1.15 fixed point */ + __s16 b_value; /* s10.6 fixed point */ + +}; + +/* This partition contains Slots power calibration + */ +#define SMU_SDB_SLOTSPOW_ID 0x78 + +struct smu_sdbp_slotspow { + __u16 pow_scale; /* u4.12 fixed point */ + __s16 pow_offset; /* s4.12 fixed point */ +}; + +/* This partition contains machine specific version information about + * the sensor/control layout + */ +#define SMU_SDB_SENSORTREE_ID 0x25 + +struct smu_sdbp_sensortree { + __u8 model_id; + __u8 unknown[3]; +}; + +/* This partition contains CPU thermal control PID informations. So far + * only single CPU machines have been seen with an SMU, so we assume this + * carries only informations for those + */ +#define SMU_SDB_CPUPIDDATA_ID 0x17 + +struct smu_sdbp_cpupiddata { + __u8 unknown1; + __u8 target_temp_delta; + __u8 unknown2; + __u8 history_len; + __s16 power_adj; + __u16 max_power; + __s32 gp,gr,gd; +}; + + +/* Other partitions without known structures */ +#define SMU_SDB_DEBUG_SWITCHES_ID 0x05 + +#ifdef __KERNEL__ +/* + * This returns the pointer to an SMU "sdb" partition data or NULL + * if not found. The data format is described below + */ +extern const struct smu_sdbp_header *smu_get_sdb_partition(int id, + unsigned int *size); + +/* Get "sdb" partition data from an SMU satellite */ +extern struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, + int id, unsigned int *size); + + +#endif /* __KERNEL__ */ + + +/* + * - Userland interface - + */ + +/* + * A given instance of the device can be configured for 2 different + * things at the moment: + * + * - sending SMU commands (default at open() time) + * - receiving SMU events (not yet implemented) + * + * Commands are written with write() of a command block. They can be + * "driver" commands (for example to switch to event reception mode) + * or real SMU commands. They are made of a header followed by command + * data if any. + * + * For SMU commands (not for driver commands), you can then read() back + * a reply. The reader will be blocked or not depending on how the device + * file is opened. poll() isn't implemented yet. The reply will consist + * of a header as well, followed by the reply data if any. You should + * always provide a buffer large enough for the maximum reply data, I + * recommand one page. + * + * It is illegal to send SMU commands through a file descriptor configured + * for events reception + * + */ +struct smu_user_cmd_hdr +{ + __u32 cmdtype; +#define SMU_CMDTYPE_SMU 0 /* SMU command */ +#define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */ +#define SMU_CMDTYPE_GET_PARTITION 2 /* retrieve an sdb partition */ + + __u8 cmd; /* SMU command byte */ + __u8 pad[3]; /* padding */ + __u32 data_len; /* Length of data following */ +}; + +struct smu_user_reply_hdr +{ + __u32 status; /* Command status */ + __u32 reply_len; /* Length of data follwing */ +}; + +#endif /* _SMU_H */ diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h new file mode 100644 index 000000000000..f5a4e168e498 --- /dev/null +++ b/arch/powerpc/include/asm/socket.h @@ -0,0 +1,64 @@ +#ifndef _ASM_POWERPC_SOCKET_H +#define _ASM_POWERPC_SOCKET_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_RCVLOWAT 16 +#define SO_SNDLOWAT 17 +#define SO_RCVTIMEO 18 +#define SO_SNDTIMEO 19 +#define SO_PASSCRED 20 +#define SO_PEERCRED 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#endif /* _ASM_POWERPC_SOCKET_H */ diff --git a/arch/powerpc/include/asm/sockios.h b/arch/powerpc/include/asm/sockios.h new file mode 100644 index 000000000000..55cef7675a31 --- /dev/null +++ b/arch/powerpc/include/asm/sockios.h @@ -0,0 +1,20 @@ +#ifndef _ASM_POWERPC_SOCKIOS_H +#define _ASM_POWERPC_SOCKIOS_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _ASM_POWERPC_SOCKIOS_H */ diff --git a/arch/powerpc/include/asm/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h new file mode 100644 index 000000000000..54a47ea2c3aa --- /dev/null +++ b/arch/powerpc/include/asm/sparsemem.h @@ -0,0 +1,32 @@ +#ifndef _ASM_POWERPC_SPARSEMEM_H +#define _ASM_POWERPC_SPARSEMEM_H 1 +#ifdef __KERNEL__ + +#ifdef CONFIG_SPARSEMEM +/* + * SECTION_SIZE_BITS 2^N: how big each section will be + * MAX_PHYSADDR_BITS 2^N: how much physical address space we have + * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space + */ +#define SECTION_SIZE_BITS 24 + +#define MAX_PHYSADDR_BITS 44 +#define MAX_PHYSMEM_BITS 44 + +#endif /* CONFIG_SPARSEMEM */ + +#ifdef CONFIG_MEMORY_HOTPLUG +extern void create_section_mapping(unsigned long start, unsigned long end); +extern int remove_section_mapping(unsigned long start, unsigned long end); +#ifdef CONFIG_NUMA +extern int hot_add_scn_to_nid(unsigned long scn_addr); +#else +static inline int hot_add_scn_to_nid(unsigned long scn_addr) +{ + return 0; +} +#endif /* CONFIG_NUMA */ +#endif /* CONFIG_MEMORY_HOTPLUG */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SPARSEMEM_H */ diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h new file mode 100644 index 000000000000..f56a843f4705 --- /dev/null +++ b/arch/powerpc/include/asm/spinlock.h @@ -0,0 +1,295 @@ +#ifndef __ASM_SPINLOCK_H +#define __ASM_SPINLOCK_H +#ifdef __KERNEL__ + +/* + * Simple spin lock operations. + * + * Copyright (C) 2001-2004 Paul Mackerras , IBM + * Copyright (C) 2001 Anton Blanchard , IBM + * Copyright (C) 2002 Dave Engebretsen , IBM + * Rework to support virtual processors + * + * Type of int is used as a full 64b word is not necessary. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * (the type definitions are in asm/spinlock_types.h) + */ +#include +#ifdef CONFIG_PPC64 +#include +#include +#include +#endif +#include +#include + +#define __raw_spin_is_locked(x) ((x)->slock != 0) + +#ifdef CONFIG_PPC64 +/* use 0x800000yy when locked, where yy == CPU number */ +#define LOCK_TOKEN (*(u32 *)(&get_paca()->lock_token)) +#else +#define LOCK_TOKEN 1 +#endif + +#if defined(CONFIG_PPC64) && defined(CONFIG_SMP) +#define CLEAR_IO_SYNC (get_paca()->io_sync = 0) +#define SYNC_IO do { \ + if (unlikely(get_paca()->io_sync)) { \ + mb(); \ + get_paca()->io_sync = 0; \ + } \ + } while (0) +#else +#define CLEAR_IO_SYNC +#define SYNC_IO +#endif + +/* + * This returns the old value in the lock, so we succeeded + * in getting the lock if the return value is 0. + */ +static inline unsigned long __spin_trylock(raw_spinlock_t *lock) +{ + unsigned long tmp, token; + + token = LOCK_TOKEN; + __asm__ __volatile__( +"1: lwarx %0,0,%2\n\ + cmpwi 0,%0,0\n\ + bne- 2f\n\ + stwcx. %1,0,%2\n\ + bne- 1b\n\ + isync\n\ +2:" : "=&r" (tmp) + : "r" (token), "r" (&lock->slock) + : "cr0", "memory"); + + return tmp; +} + +static inline int __raw_spin_trylock(raw_spinlock_t *lock) +{ + CLEAR_IO_SYNC; + return __spin_trylock(lock) == 0; +} + +/* + * On a system with shared processors (that is, where a physical + * processor is multiplexed between several virtual processors), + * there is no point spinning on a lock if the holder of the lock + * isn't currently scheduled on a physical processor. Instead + * we detect this situation and ask the hypervisor to give the + * rest of our timeslice to the lock holder. + * + * So that we can tell which virtual processor is holding a lock, + * we put 0x80000000 | smp_processor_id() in the lock when it is + * held. Conveniently, we have a word in the paca that holds this + * value. + */ + +#if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES) +/* We only yield to the hypervisor if we are in shared processor mode */ +#define SHARED_PROCESSOR (get_lppaca()->shared_proc) +extern void __spin_yield(raw_spinlock_t *lock); +extern void __rw_yield(raw_rwlock_t *lock); +#else /* SPLPAR || ISERIES */ +#define __spin_yield(x) barrier() +#define __rw_yield(x) barrier() +#define SHARED_PROCESSOR 0 +#endif + +static inline void __raw_spin_lock(raw_spinlock_t *lock) +{ + CLEAR_IO_SYNC; + while (1) { + if (likely(__spin_trylock(lock) == 0)) + break; + do { + HMT_low(); + if (SHARED_PROCESSOR) + __spin_yield(lock); + } while (unlikely(lock->slock != 0)); + HMT_medium(); + } +} + +static inline +void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags) +{ + unsigned long flags_dis; + + CLEAR_IO_SYNC; + while (1) { + if (likely(__spin_trylock(lock) == 0)) + break; + local_save_flags(flags_dis); + local_irq_restore(flags); + do { + HMT_low(); + if (SHARED_PROCESSOR) + __spin_yield(lock); + } while (unlikely(lock->slock != 0)); + HMT_medium(); + local_irq_restore(flags_dis); + } +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lock) +{ + SYNC_IO; + __asm__ __volatile__("# __raw_spin_unlock\n\t" + LWSYNC_ON_SMP: : :"memory"); + lock->slock = 0; +} + +#ifdef CONFIG_PPC64 +extern void __raw_spin_unlock_wait(raw_spinlock_t *lock); +#else +#define __raw_spin_unlock_wait(lock) \ + do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) +#endif + +/* + * Read-write spinlocks, allowing multiple readers + * but only one writer. + * + * NOTE! it is quite common to have readers in interrupts + * but no interrupt writers. For those circumstances we + * can "mix" irq-safe locks - any writer needs to get a + * irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + */ + +#define __raw_read_can_lock(rw) ((rw)->lock >= 0) +#define __raw_write_can_lock(rw) (!(rw)->lock) + +#ifdef CONFIG_PPC64 +#define __DO_SIGN_EXTEND "extsw %0,%0\n" +#define WRLOCK_TOKEN LOCK_TOKEN /* it's negative */ +#else +#define __DO_SIGN_EXTEND +#define WRLOCK_TOKEN (-1) +#endif + +/* + * This returns the old value in the lock + 1, + * so we got a read lock if the return value is > 0. + */ +static inline long __read_trylock(raw_rwlock_t *rw) +{ + long tmp; + + __asm__ __volatile__( +"1: lwarx %0,0,%1\n" + __DO_SIGN_EXTEND +" addic. %0,%0,1\n\ + ble- 2f\n" + PPC405_ERR77(0,%1) +" stwcx. %0,0,%1\n\ + bne- 1b\n\ + isync\n\ +2:" : "=&r" (tmp) + : "r" (&rw->lock) + : "cr0", "xer", "memory"); + + return tmp; +} + +/* + * This returns the old value in the lock, + * so we got the write lock if the return value is 0. + */ +static inline long __write_trylock(raw_rwlock_t *rw) +{ + long tmp, token; + + token = WRLOCK_TOKEN; + __asm__ __volatile__( +"1: lwarx %0,0,%2\n\ + cmpwi 0,%0,0\n\ + bne- 2f\n" + PPC405_ERR77(0,%1) +" stwcx. %1,0,%2\n\ + bne- 1b\n\ + isync\n\ +2:" : "=&r" (tmp) + : "r" (token), "r" (&rw->lock) + : "cr0", "memory"); + + return tmp; +} + +static inline void __raw_read_lock(raw_rwlock_t *rw) +{ + while (1) { + if (likely(__read_trylock(rw) > 0)) + break; + do { + HMT_low(); + if (SHARED_PROCESSOR) + __rw_yield(rw); + } while (unlikely(rw->lock < 0)); + HMT_medium(); + } +} + +static inline void __raw_write_lock(raw_rwlock_t *rw) +{ + while (1) { + if (likely(__write_trylock(rw) == 0)) + break; + do { + HMT_low(); + if (SHARED_PROCESSOR) + __rw_yield(rw); + } while (unlikely(rw->lock != 0)); + HMT_medium(); + } +} + +static inline int __raw_read_trylock(raw_rwlock_t *rw) +{ + return __read_trylock(rw) > 0; +} + +static inline int __raw_write_trylock(raw_rwlock_t *rw) +{ + return __write_trylock(rw) == 0; +} + +static inline void __raw_read_unlock(raw_rwlock_t *rw) +{ + long tmp; + + __asm__ __volatile__( + "# read_unlock\n\t" + LWSYNC_ON_SMP +"1: lwarx %0,0,%1\n\ + addic %0,%0,-1\n" + PPC405_ERR77(0,%1) +" stwcx. %0,0,%1\n\ + bne- 1b" + : "=&r"(tmp) + : "r"(&rw->lock) + : "cr0", "memory"); +} + +static inline void __raw_write_unlock(raw_rwlock_t *rw) +{ + __asm__ __volatile__("# write_unlock\n\t" + LWSYNC_ON_SMP: : :"memory"); + rw->lock = 0; +} + +#define _raw_spin_relax(lock) __spin_yield(lock) +#define _raw_read_relax(lock) __rw_yield(lock) +#define _raw_write_relax(lock) __rw_yield(lock) + +#endif /* __KERNEL__ */ +#endif /* __ASM_SPINLOCK_H */ diff --git a/arch/powerpc/include/asm/spinlock_types.h b/arch/powerpc/include/asm/spinlock_types.h new file mode 100644 index 000000000000..74236c9f05b1 --- /dev/null +++ b/arch/powerpc/include/asm/spinlock_types.h @@ -0,0 +1,20 @@ +#ifndef _ASM_POWERPC_SPINLOCK_TYPES_H +#define _ASM_POWERPC_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct { + volatile unsigned int slock; +} raw_spinlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 0 } + +typedef struct { + volatile signed int lock; +} raw_rwlock_t; + +#define __RAW_RW_LOCK_UNLOCKED { 0 } + +#endif diff --git a/arch/powerpc/include/asm/spu.h b/arch/powerpc/include/asm/spu.h new file mode 100644 index 000000000000..8b2eb044270a --- /dev/null +++ b/arch/powerpc/include/asm/spu.h @@ -0,0 +1,732 @@ +/* + * SPU core / file system interface and HW structures + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPU_H +#define _SPU_H +#ifdef __KERNEL__ + +#include +#include + +#define LS_SIZE (256 * 1024) +#define LS_ADDR_MASK (LS_SIZE - 1) + +#define MFC_PUT_CMD 0x20 +#define MFC_PUTS_CMD 0x28 +#define MFC_PUTR_CMD 0x30 +#define MFC_PUTF_CMD 0x22 +#define MFC_PUTB_CMD 0x21 +#define MFC_PUTFS_CMD 0x2A +#define MFC_PUTBS_CMD 0x29 +#define MFC_PUTRF_CMD 0x32 +#define MFC_PUTRB_CMD 0x31 +#define MFC_PUTL_CMD 0x24 +#define MFC_PUTRL_CMD 0x34 +#define MFC_PUTLF_CMD 0x26 +#define MFC_PUTLB_CMD 0x25 +#define MFC_PUTRLF_CMD 0x36 +#define MFC_PUTRLB_CMD 0x35 + +#define MFC_GET_CMD 0x40 +#define MFC_GETS_CMD 0x48 +#define MFC_GETF_CMD 0x42 +#define MFC_GETB_CMD 0x41 +#define MFC_GETFS_CMD 0x4A +#define MFC_GETBS_CMD 0x49 +#define MFC_GETL_CMD 0x44 +#define MFC_GETLF_CMD 0x46 +#define MFC_GETLB_CMD 0x45 + +#define MFC_SDCRT_CMD 0x80 +#define MFC_SDCRTST_CMD 0x81 +#define MFC_SDCRZ_CMD 0x89 +#define MFC_SDCRS_CMD 0x8D +#define MFC_SDCRF_CMD 0x8F + +#define MFC_GETLLAR_CMD 0xD0 +#define MFC_PUTLLC_CMD 0xB4 +#define MFC_PUTLLUC_CMD 0xB0 +#define MFC_PUTQLLUC_CMD 0xB8 +#define MFC_SNDSIG_CMD 0xA0 +#define MFC_SNDSIGB_CMD 0xA1 +#define MFC_SNDSIGF_CMD 0xA2 +#define MFC_BARRIER_CMD 0xC0 +#define MFC_EIEIO_CMD 0xC8 +#define MFC_SYNC_CMD 0xCC + +#define MFC_MIN_DMA_SIZE_SHIFT 4 /* 16 bytes */ +#define MFC_MAX_DMA_SIZE_SHIFT 14 /* 16384 bytes */ +#define MFC_MIN_DMA_SIZE (1 << MFC_MIN_DMA_SIZE_SHIFT) +#define MFC_MAX_DMA_SIZE (1 << MFC_MAX_DMA_SIZE_SHIFT) +#define MFC_MIN_DMA_SIZE_MASK (MFC_MIN_DMA_SIZE - 1) +#define MFC_MAX_DMA_SIZE_MASK (MFC_MAX_DMA_SIZE - 1) +#define MFC_MIN_DMA_LIST_SIZE 0x0008 /* 8 bytes */ +#define MFC_MAX_DMA_LIST_SIZE 0x4000 /* 16K bytes */ + +#define MFC_TAGID_TO_TAGMASK(tag_id) (1 << (tag_id & 0x1F)) + +/* Events for Channels 0-2 */ +#define MFC_DMA_TAG_STATUS_UPDATE_EVENT 0x00000001 +#define MFC_DMA_TAG_CMD_STALL_NOTIFY_EVENT 0x00000002 +#define MFC_DMA_QUEUE_AVAILABLE_EVENT 0x00000008 +#define MFC_SPU_MAILBOX_WRITTEN_EVENT 0x00000010 +#define MFC_DECREMENTER_EVENT 0x00000020 +#define MFC_PU_INT_MAILBOX_AVAILABLE_EVENT 0x00000040 +#define MFC_PU_MAILBOX_AVAILABLE_EVENT 0x00000080 +#define MFC_SIGNAL_2_EVENT 0x00000100 +#define MFC_SIGNAL_1_EVENT 0x00000200 +#define MFC_LLR_LOST_EVENT 0x00000400 +#define MFC_PRIV_ATTN_EVENT 0x00000800 +#define MFC_MULTI_SRC_EVENT 0x00001000 + +/* Flag indicating progress during context switch. */ +#define SPU_CONTEXT_SWITCH_PENDING 0UL +#define SPU_CONTEXT_FAULT_PENDING 1UL + +struct spu_context; +struct spu_runqueue; +struct spu_lscsa; +struct device_node; + +enum spu_utilization_state { + SPU_UTIL_USER, + SPU_UTIL_SYSTEM, + SPU_UTIL_IOWAIT, + SPU_UTIL_IDLE_LOADED, + SPU_UTIL_MAX +}; + +struct spu { + const char *name; + unsigned long local_store_phys; + u8 *local_store; + unsigned long problem_phys; + struct spu_problem __iomem *problem; + struct spu_priv2 __iomem *priv2; + struct list_head cbe_list; + struct list_head full_list; + enum { SPU_FREE, SPU_USED } alloc_state; + int number; + unsigned int irqs[3]; + u32 node; + u64 flags; + u64 class_0_pending; + u64 class_0_dar; + u64 class_1_dar; + u64 class_1_dsisr; + size_t ls_size; + unsigned int slb_replace; + struct mm_struct *mm; + struct spu_context *ctx; + struct spu_runqueue *rq; + unsigned long long timestamp; + pid_t pid; + pid_t tgid; + spinlock_t register_lock; + + void (* wbox_callback)(struct spu *spu); + void (* ibox_callback)(struct spu *spu); + void (* stop_callback)(struct spu *spu, int irq); + void (* mfc_callback)(struct spu *spu); + + char irq_c0[8]; + char irq_c1[8]; + char irq_c2[8]; + + u64 spe_id; + + void* pdata; /* platform private data */ + + /* of based platforms only */ + struct device_node *devnode; + + /* native only */ + struct spu_priv1 __iomem *priv1; + + /* beat only */ + u64 shadow_int_mask_RW[3]; + + struct sys_device sysdev; + + int has_mem_affinity; + struct list_head aff_list; + + struct { + /* protected by interrupt reentrancy */ + enum spu_utilization_state util_state; + unsigned long long tstamp; + unsigned long long times[SPU_UTIL_MAX]; + unsigned long long vol_ctx_switch; + unsigned long long invol_ctx_switch; + unsigned long long min_flt; + unsigned long long maj_flt; + unsigned long long hash_flt; + unsigned long long slb_flt; + unsigned long long class2_intr; + unsigned long long libassist; + } stats; +}; + +struct cbe_spu_info { + struct mutex list_mutex; + struct list_head spus; + int n_spus; + int nr_active; + atomic_t busy_spus; + atomic_t reserved_spus; +}; + +extern struct cbe_spu_info cbe_spu_info[]; + +void spu_init_channels(struct spu *spu); +void spu_irq_setaffinity(struct spu *spu, int cpu); + +void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa, + void *code, int code_size); + +#ifdef CONFIG_KEXEC +void crash_register_spus(struct list_head *list); +#else +static inline void crash_register_spus(struct list_head *list) +{ +} +#endif + +extern void spu_invalidate_slbs(struct spu *spu); +extern void spu_associate_mm(struct spu *spu, struct mm_struct *mm); +int spu_64k_pages_available(void); + +/* Calls from the memory management to the SPU */ +struct mm_struct; +extern void spu_flush_all_slbs(struct mm_struct *mm); + +/* This interface allows a profiler (e.g., OProfile) to store a ref + * to spu context information that it creates. This caching technique + * avoids the need to recreate this information after a save/restore operation. + * + * Assumes the caller has already incremented the ref count to + * profile_info; then spu_context_destroy must call kref_put + * on prof_info_kref. + */ +void spu_set_profile_private_kref(struct spu_context *ctx, + struct kref *prof_info_kref, + void ( * prof_info_release) (struct kref *kref)); + +void *spu_get_profile_private_kref(struct spu_context *ctx); + +/* system callbacks from the SPU */ +struct spu_syscall_block { + u64 nr_ret; + u64 parm[6]; +}; +extern long spu_sys_callback(struct spu_syscall_block *s); + +/* syscalls implemented in spufs */ +struct file; +struct spufs_calls { + long (*create_thread)(const char __user *name, + unsigned int flags, mode_t mode, + struct file *neighbor); + long (*spu_run)(struct file *filp, __u32 __user *unpc, + __u32 __user *ustatus); + int (*coredump_extra_notes_size)(void); + int (*coredump_extra_notes_write)(struct file *file, loff_t *foffset); + void (*notify_spus_active)(void); + struct module *owner; +}; + +/* return status from spu_run, same as in libspe */ +#define SPE_EVENT_DMA_ALIGNMENT 0x0008 /*A DMA alignment error */ +#define SPE_EVENT_SPE_ERROR 0x0010 /*An illegal instruction error*/ +#define SPE_EVENT_SPE_DATA_SEGMENT 0x0020 /*A DMA segmentation error */ +#define SPE_EVENT_SPE_DATA_STORAGE 0x0040 /*A DMA storage error */ +#define SPE_EVENT_INVALID_DMA 0x0800 /* Invalid MFC DMA */ + +/* + * Flags for sys_spu_create. + */ +#define SPU_CREATE_EVENTS_ENABLED 0x0001 +#define SPU_CREATE_GANG 0x0002 +#define SPU_CREATE_NOSCHED 0x0004 +#define SPU_CREATE_ISOLATE 0x0008 +#define SPU_CREATE_AFFINITY_SPU 0x0010 +#define SPU_CREATE_AFFINITY_MEM 0x0020 + +#define SPU_CREATE_FLAG_ALL 0x003f /* mask of all valid flags */ + + +int register_spu_syscalls(struct spufs_calls *calls); +void unregister_spu_syscalls(struct spufs_calls *calls); + +int spu_add_sysdev_attr(struct sysdev_attribute *attr); +void spu_remove_sysdev_attr(struct sysdev_attribute *attr); + +int spu_add_sysdev_attr_group(struct attribute_group *attrs); +void spu_remove_sysdev_attr_group(struct attribute_group *attrs); + +int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea, + unsigned long dsisr, unsigned *flt); + +/* + * Notifier blocks: + * + * oprofile can get notified when a context switch is performed + * on an spe. The notifer function that gets called is passed + * a pointer to the SPU structure as well as the object-id that + * identifies the binary running on that SPU now. + * + * For a context save, the object-id that is passed is zero, + * identifying that the kernel will run from that moment on. + * + * For a context restore, the object-id is the value written + * to object-id spufs file from user space and the notifer + * function can assume that spu->ctx is valid. + */ +struct notifier_block; +int spu_switch_event_register(struct notifier_block * n); +int spu_switch_event_unregister(struct notifier_block * n); + +extern void notify_spus_active(void); +extern void do_notify_spus_active(void); + +/* + * This defines the Local Store, Problem Area and Privilege Area of an SPU. + */ + +union mfc_tag_size_class_cmd { + struct { + u16 mfc_size; + u16 mfc_tag; + u8 pad; + u8 mfc_rclassid; + u16 mfc_cmd; + } u; + struct { + u32 mfc_size_tag32; + u32 mfc_class_cmd32; + } by32; + u64 all64; +}; + +struct mfc_cq_sr { + u64 mfc_cq_data0_RW; + u64 mfc_cq_data1_RW; + u64 mfc_cq_data2_RW; + u64 mfc_cq_data3_RW; +}; + +struct spu_problem { +#define MS_SYNC_PENDING 1L + u64 spc_mssync_RW; /* 0x0000 */ + u8 pad_0x0008_0x3000[0x3000 - 0x0008]; + + /* DMA Area */ + u8 pad_0x3000_0x3004[0x4]; /* 0x3000 */ + u32 mfc_lsa_W; /* 0x3004 */ + u64 mfc_ea_W; /* 0x3008 */ + union mfc_tag_size_class_cmd mfc_union_W; /* 0x3010 */ + u8 pad_0x3018_0x3104[0xec]; /* 0x3018 */ + u32 dma_qstatus_R; /* 0x3104 */ + u8 pad_0x3108_0x3204[0xfc]; /* 0x3108 */ + u32 dma_querytype_RW; /* 0x3204 */ + u8 pad_0x3208_0x321c[0x14]; /* 0x3208 */ + u32 dma_querymask_RW; /* 0x321c */ + u8 pad_0x3220_0x322c[0xc]; /* 0x3220 */ + u32 dma_tagstatus_R; /* 0x322c */ +#define DMA_TAGSTATUS_INTR_ANY 1u +#define DMA_TAGSTATUS_INTR_ALL 2u + u8 pad_0x3230_0x4000[0x4000 - 0x3230]; /* 0x3230 */ + + /* SPU Control Area */ + u8 pad_0x4000_0x4004[0x4]; /* 0x4000 */ + u32 pu_mb_R; /* 0x4004 */ + u8 pad_0x4008_0x400c[0x4]; /* 0x4008 */ + u32 spu_mb_W; /* 0x400c */ + u8 pad_0x4010_0x4014[0x4]; /* 0x4010 */ + u32 mb_stat_R; /* 0x4014 */ + u8 pad_0x4018_0x401c[0x4]; /* 0x4018 */ + u32 spu_runcntl_RW; /* 0x401c */ +#define SPU_RUNCNTL_STOP 0L +#define SPU_RUNCNTL_RUNNABLE 1L +#define SPU_RUNCNTL_ISOLATE 2L + u8 pad_0x4020_0x4024[0x4]; /* 0x4020 */ + u32 spu_status_R; /* 0x4024 */ +#define SPU_STOP_STATUS_SHIFT 16 +#define SPU_STATUS_STOPPED 0x0 +#define SPU_STATUS_RUNNING 0x1 +#define SPU_STATUS_STOPPED_BY_STOP 0x2 +#define SPU_STATUS_STOPPED_BY_HALT 0x4 +#define SPU_STATUS_WAITING_FOR_CHANNEL 0x8 +#define SPU_STATUS_SINGLE_STEP 0x10 +#define SPU_STATUS_INVALID_INSTR 0x20 +#define SPU_STATUS_INVALID_CH 0x40 +#define SPU_STATUS_ISOLATED_STATE 0x80 +#define SPU_STATUS_ISOLATED_LOAD_STATUS 0x200 +#define SPU_STATUS_ISOLATED_EXIT_STATUS 0x400 + u8 pad_0x4028_0x402c[0x4]; /* 0x4028 */ + u32 spu_spe_R; /* 0x402c */ + u8 pad_0x4030_0x4034[0x4]; /* 0x4030 */ + u32 spu_npc_RW; /* 0x4034 */ + u8 pad_0x4038_0x14000[0x14000 - 0x4038]; /* 0x4038 */ + + /* Signal Notification Area */ + u8 pad_0x14000_0x1400c[0xc]; /* 0x14000 */ + u32 signal_notify1; /* 0x1400c */ + u8 pad_0x14010_0x1c00c[0x7ffc]; /* 0x14010 */ + u32 signal_notify2; /* 0x1c00c */ +} __attribute__ ((aligned(0x20000))); + +/* SPU Privilege 2 State Area */ +struct spu_priv2 { + /* MFC Registers */ + u8 pad_0x0000_0x1100[0x1100 - 0x0000]; /* 0x0000 */ + + /* SLB Management Registers */ + u8 pad_0x1100_0x1108[0x8]; /* 0x1100 */ + u64 slb_index_W; /* 0x1108 */ +#define SLB_INDEX_MASK 0x7L + u64 slb_esid_RW; /* 0x1110 */ + u64 slb_vsid_RW; /* 0x1118 */ +#define SLB_VSID_SUPERVISOR_STATE (0x1ull << 11) +#define SLB_VSID_SUPERVISOR_STATE_MASK (0x1ull << 11) +#define SLB_VSID_PROBLEM_STATE (0x1ull << 10) +#define SLB_VSID_PROBLEM_STATE_MASK (0x1ull << 10) +#define SLB_VSID_EXECUTE_SEGMENT (0x1ull << 9) +#define SLB_VSID_NO_EXECUTE_SEGMENT (0x1ull << 9) +#define SLB_VSID_EXECUTE_SEGMENT_MASK (0x1ull << 9) +#define SLB_VSID_4K_PAGE (0x0 << 8) +#define SLB_VSID_LARGE_PAGE (0x1ull << 8) +#define SLB_VSID_PAGE_SIZE_MASK (0x1ull << 8) +#define SLB_VSID_CLASS_MASK (0x1ull << 7) +#define SLB_VSID_VIRTUAL_PAGE_SIZE_MASK (0x1ull << 6) + u64 slb_invalidate_entry_W; /* 0x1120 */ + u64 slb_invalidate_all_W; /* 0x1128 */ + u8 pad_0x1130_0x2000[0x2000 - 0x1130]; /* 0x1130 */ + + /* Context Save / Restore Area */ + struct mfc_cq_sr spuq[16]; /* 0x2000 */ + struct mfc_cq_sr puq[8]; /* 0x2200 */ + u8 pad_0x2300_0x3000[0x3000 - 0x2300]; /* 0x2300 */ + + /* MFC Control */ + u64 mfc_control_RW; /* 0x3000 */ +#define MFC_CNTL_RESUME_DMA_QUEUE (0ull << 0) +#define MFC_CNTL_SUSPEND_DMA_QUEUE (1ull << 0) +#define MFC_CNTL_SUSPEND_DMA_QUEUE_MASK (1ull << 0) +#define MFC_CNTL_SUSPEND_MASK (1ull << 4) +#define MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION (0ull << 8) +#define MFC_CNTL_SUSPEND_IN_PROGRESS (1ull << 8) +#define MFC_CNTL_SUSPEND_COMPLETE (3ull << 8) +#define MFC_CNTL_SUSPEND_DMA_STATUS_MASK (3ull << 8) +#define MFC_CNTL_DMA_QUEUES_EMPTY (1ull << 14) +#define MFC_CNTL_DMA_QUEUES_EMPTY_MASK (1ull << 14) +#define MFC_CNTL_PURGE_DMA_REQUEST (1ull << 15) +#define MFC_CNTL_PURGE_DMA_IN_PROGRESS (1ull << 24) +#define MFC_CNTL_PURGE_DMA_COMPLETE (3ull << 24) +#define MFC_CNTL_PURGE_DMA_STATUS_MASK (3ull << 24) +#define MFC_CNTL_RESTART_DMA_COMMAND (1ull << 32) +#define MFC_CNTL_DMA_COMMAND_REISSUE_PENDING (1ull << 32) +#define MFC_CNTL_DMA_COMMAND_REISSUE_STATUS_MASK (1ull << 32) +#define MFC_CNTL_MFC_PRIVILEGE_STATE (2ull << 33) +#define MFC_CNTL_MFC_PROBLEM_STATE (3ull << 33) +#define MFC_CNTL_MFC_KEY_PROTECTION_STATE_MASK (3ull << 33) +#define MFC_CNTL_DECREMENTER_HALTED (1ull << 35) +#define MFC_CNTL_DECREMENTER_RUNNING (1ull << 40) +#define MFC_CNTL_DECREMENTER_STATUS_MASK (1ull << 40) + u8 pad_0x3008_0x4000[0x4000 - 0x3008]; /* 0x3008 */ + + /* Interrupt Mailbox */ + u64 puint_mb_R; /* 0x4000 */ + u8 pad_0x4008_0x4040[0x4040 - 0x4008]; /* 0x4008 */ + + /* SPU Control */ + u64 spu_privcntl_RW; /* 0x4040 */ +#define SPU_PRIVCNTL_MODE_NORMAL (0x0ull << 0) +#define SPU_PRIVCNTL_MODE_SINGLE_STEP (0x1ull << 0) +#define SPU_PRIVCNTL_MODE_MASK (0x1ull << 0) +#define SPU_PRIVCNTL_NO_ATTENTION_EVENT (0x0ull << 1) +#define SPU_PRIVCNTL_ATTENTION_EVENT (0x1ull << 1) +#define SPU_PRIVCNTL_ATTENTION_EVENT_MASK (0x1ull << 1) +#define SPU_PRIVCNT_LOAD_REQUEST_NORMAL (0x0ull << 2) +#define SPU_PRIVCNT_LOAD_REQUEST_ENABLE_MASK (0x1ull << 2) + u8 pad_0x4048_0x4058[0x10]; /* 0x4048 */ + u64 spu_lslr_RW; /* 0x4058 */ + u64 spu_chnlcntptr_RW; /* 0x4060 */ + u64 spu_chnlcnt_RW; /* 0x4068 */ + u64 spu_chnldata_RW; /* 0x4070 */ + u64 spu_cfg_RW; /* 0x4078 */ + u8 pad_0x4080_0x5000[0x5000 - 0x4080]; /* 0x4080 */ + + /* PV2_ImplRegs: Implementation-specific privileged-state 2 regs */ + u64 spu_pm_trace_tag_status_RW; /* 0x5000 */ + u64 spu_tag_status_query_RW; /* 0x5008 */ +#define TAG_STATUS_QUERY_CONDITION_BITS (0x3ull << 32) +#define TAG_STATUS_QUERY_MASK_BITS (0xffffffffull) + u64 spu_cmd_buf1_RW; /* 0x5010 */ +#define SPU_COMMAND_BUFFER_1_LSA_BITS (0x7ffffull << 32) +#define SPU_COMMAND_BUFFER_1_EAH_BITS (0xffffffffull) + u64 spu_cmd_buf2_RW; /* 0x5018 */ +#define SPU_COMMAND_BUFFER_2_EAL_BITS ((0xffffffffull) << 32) +#define SPU_COMMAND_BUFFER_2_TS_BITS (0xffffull << 16) +#define SPU_COMMAND_BUFFER_2_TAG_BITS (0x3full) + u64 spu_atomic_status_RW; /* 0x5020 */ +} __attribute__ ((aligned(0x20000))); + +/* SPU Privilege 1 State Area */ +struct spu_priv1 { + /* Control and Configuration Area */ + u64 mfc_sr1_RW; /* 0x000 */ +#define MFC_STATE1_LOCAL_STORAGE_DECODE_MASK 0x01ull +#define MFC_STATE1_BUS_TLBIE_MASK 0x02ull +#define MFC_STATE1_REAL_MODE_OFFSET_ENABLE_MASK 0x04ull +#define MFC_STATE1_PROBLEM_STATE_MASK 0x08ull +#define MFC_STATE1_RELOCATE_MASK 0x10ull +#define MFC_STATE1_MASTER_RUN_CONTROL_MASK 0x20ull +#define MFC_STATE1_TABLE_SEARCH_MASK 0x40ull + u64 mfc_lpid_RW; /* 0x008 */ + u64 spu_idr_RW; /* 0x010 */ + u64 mfc_vr_RO; /* 0x018 */ +#define MFC_VERSION_BITS (0xffff << 16) +#define MFC_REVISION_BITS (0xffff) +#define MFC_GET_VERSION_BITS(vr) (((vr) & MFC_VERSION_BITS) >> 16) +#define MFC_GET_REVISION_BITS(vr) ((vr) & MFC_REVISION_BITS) + u64 spu_vr_RO; /* 0x020 */ +#define SPU_VERSION_BITS (0xffff << 16) +#define SPU_REVISION_BITS (0xffff) +#define SPU_GET_VERSION_BITS(vr) (vr & SPU_VERSION_BITS) >> 16 +#define SPU_GET_REVISION_BITS(vr) (vr & SPU_REVISION_BITS) + u8 pad_0x28_0x100[0x100 - 0x28]; /* 0x28 */ + + /* Interrupt Area */ + u64 int_mask_RW[3]; /* 0x100 */ +#define CLASS0_ENABLE_DMA_ALIGNMENT_INTR 0x1L +#define CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR 0x2L +#define CLASS0_ENABLE_SPU_ERROR_INTR 0x4L +#define CLASS0_ENABLE_MFC_FIR_INTR 0x8L +#define CLASS1_ENABLE_SEGMENT_FAULT_INTR 0x1L +#define CLASS1_ENABLE_STORAGE_FAULT_INTR 0x2L +#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_GET_INTR 0x4L +#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_PUT_INTR 0x8L +#define CLASS2_ENABLE_MAILBOX_INTR 0x1L +#define CLASS2_ENABLE_SPU_STOP_INTR 0x2L +#define CLASS2_ENABLE_SPU_HALT_INTR 0x4L +#define CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR 0x8L +#define CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR 0x10L + u8 pad_0x118_0x140[0x28]; /* 0x118 */ + u64 int_stat_RW[3]; /* 0x140 */ +#define CLASS0_DMA_ALIGNMENT_INTR 0x1L +#define CLASS0_INVALID_DMA_COMMAND_INTR 0x2L +#define CLASS0_SPU_ERROR_INTR 0x4L +#define CLASS0_INTR_MASK 0x7L +#define CLASS1_SEGMENT_FAULT_INTR 0x1L +#define CLASS1_STORAGE_FAULT_INTR 0x2L +#define CLASS1_LS_COMPARE_SUSPEND_ON_GET_INTR 0x4L +#define CLASS1_LS_COMPARE_SUSPEND_ON_PUT_INTR 0x8L +#define CLASS1_INTR_MASK 0xfL +#define CLASS2_MAILBOX_INTR 0x1L +#define CLASS2_SPU_STOP_INTR 0x2L +#define CLASS2_SPU_HALT_INTR 0x4L +#define CLASS2_SPU_DMA_TAG_GROUP_COMPLETE_INTR 0x8L +#define CLASS2_MAILBOX_THRESHOLD_INTR 0x10L +#define CLASS2_INTR_MASK 0x1fL + u8 pad_0x158_0x180[0x28]; /* 0x158 */ + u64 int_route_RW; /* 0x180 */ + + /* Interrupt Routing */ + u8 pad_0x188_0x200[0x200 - 0x188]; /* 0x188 */ + + /* Atomic Unit Control Area */ + u64 mfc_atomic_flush_RW; /* 0x200 */ +#define mfc_atomic_flush_enable 0x1L + u8 pad_0x208_0x280[0x78]; /* 0x208 */ + u64 resource_allocation_groupID_RW; /* 0x280 */ + u64 resource_allocation_enable_RW; /* 0x288 */ + u8 pad_0x290_0x3c8[0x3c8 - 0x290]; /* 0x290 */ + + /* SPU_Cache_ImplRegs: Implementation-dependent cache registers */ + + u64 smf_sbi_signal_sel; /* 0x3c8 */ +#define smf_sbi_mask_lsb 56 +#define smf_sbi_shift (63 - smf_sbi_mask_lsb) +#define smf_sbi_mask (0x301LL << smf_sbi_shift) +#define smf_sbi_bus0_bits (0x001LL << smf_sbi_shift) +#define smf_sbi_bus2_bits (0x100LL << smf_sbi_shift) +#define smf_sbi2_bus0_bits (0x201LL << smf_sbi_shift) +#define smf_sbi2_bus2_bits (0x300LL << smf_sbi_shift) + u64 smf_ato_signal_sel; /* 0x3d0 */ +#define smf_ato_mask_lsb 35 +#define smf_ato_shift (63 - smf_ato_mask_lsb) +#define smf_ato_mask (0x3LL << smf_ato_shift) +#define smf_ato_bus0_bits (0x2LL << smf_ato_shift) +#define smf_ato_bus2_bits (0x1LL << smf_ato_shift) + u8 pad_0x3d8_0x400[0x400 - 0x3d8]; /* 0x3d8 */ + + /* TLB Management Registers */ + u64 mfc_sdr_RW; /* 0x400 */ + u8 pad_0x408_0x500[0xf8]; /* 0x408 */ + u64 tlb_index_hint_RO; /* 0x500 */ + u64 tlb_index_W; /* 0x508 */ + u64 tlb_vpn_RW; /* 0x510 */ + u64 tlb_rpn_RW; /* 0x518 */ + u8 pad_0x520_0x540[0x20]; /* 0x520 */ + u64 tlb_invalidate_entry_W; /* 0x540 */ + u64 tlb_invalidate_all_W; /* 0x548 */ + u8 pad_0x550_0x580[0x580 - 0x550]; /* 0x550 */ + + /* SPU_MMU_ImplRegs: Implementation-dependent MMU registers */ + u64 smm_hid; /* 0x580 */ +#define PAGE_SIZE_MASK 0xf000000000000000ull +#define PAGE_SIZE_16MB_64KB 0x2000000000000000ull + u8 pad_0x588_0x600[0x600 - 0x588]; /* 0x588 */ + + /* MFC Status/Control Area */ + u64 mfc_accr_RW; /* 0x600 */ +#define MFC_ACCR_EA_ACCESS_GET (1 << 0) +#define MFC_ACCR_EA_ACCESS_PUT (1 << 1) +#define MFC_ACCR_LS_ACCESS_GET (1 << 3) +#define MFC_ACCR_LS_ACCESS_PUT (1 << 4) + u8 pad_0x608_0x610[0x8]; /* 0x608 */ + u64 mfc_dsisr_RW; /* 0x610 */ +#define MFC_DSISR_PTE_NOT_FOUND (1 << 30) +#define MFC_DSISR_ACCESS_DENIED (1 << 27) +#define MFC_DSISR_ATOMIC (1 << 26) +#define MFC_DSISR_ACCESS_PUT (1 << 25) +#define MFC_DSISR_ADDR_MATCH (1 << 22) +#define MFC_DSISR_LS (1 << 17) +#define MFC_DSISR_L (1 << 16) +#define MFC_DSISR_ADDRESS_OVERFLOW (1 << 0) + u8 pad_0x618_0x620[0x8]; /* 0x618 */ + u64 mfc_dar_RW; /* 0x620 */ + u8 pad_0x628_0x700[0x700 - 0x628]; /* 0x628 */ + + /* Replacement Management Table (RMT) Area */ + u64 rmt_index_RW; /* 0x700 */ + u8 pad_0x708_0x710[0x8]; /* 0x708 */ + u64 rmt_data1_RW; /* 0x710 */ + u8 pad_0x718_0x800[0x800 - 0x718]; /* 0x718 */ + + /* Control/Configuration Registers */ + u64 mfc_dsir_R; /* 0x800 */ +#define MFC_DSIR_Q (1 << 31) +#define MFC_DSIR_SPU_QUEUE MFC_DSIR_Q + u64 mfc_lsacr_RW; /* 0x808 */ +#define MFC_LSACR_COMPARE_MASK ((~0ull) << 32) +#define MFC_LSACR_COMPARE_ADDR ((~0ull) >> 32) + u64 mfc_lscrr_R; /* 0x810 */ +#define MFC_LSCRR_Q (1 << 31) +#define MFC_LSCRR_SPU_QUEUE MFC_LSCRR_Q +#define MFC_LSCRR_QI_SHIFT 32 +#define MFC_LSCRR_QI_MASK ((~0ull) << MFC_LSCRR_QI_SHIFT) + u8 pad_0x818_0x820[0x8]; /* 0x818 */ + u64 mfc_tclass_id_RW; /* 0x820 */ +#define MFC_TCLASS_ID_ENABLE (1L << 0L) +#define MFC_TCLASS_SLOT2_ENABLE (1L << 5L) +#define MFC_TCLASS_SLOT1_ENABLE (1L << 6L) +#define MFC_TCLASS_SLOT0_ENABLE (1L << 7L) +#define MFC_TCLASS_QUOTA_2_SHIFT 8L +#define MFC_TCLASS_QUOTA_1_SHIFT 16L +#define MFC_TCLASS_QUOTA_0_SHIFT 24L +#define MFC_TCLASS_QUOTA_2_MASK (0x1FL << MFC_TCLASS_QUOTA_2_SHIFT) +#define MFC_TCLASS_QUOTA_1_MASK (0x1FL << MFC_TCLASS_QUOTA_1_SHIFT) +#define MFC_TCLASS_QUOTA_0_MASK (0x1FL << MFC_TCLASS_QUOTA_0_SHIFT) + u8 pad_0x828_0x900[0x900 - 0x828]; /* 0x828 */ + + /* Real Mode Support Registers */ + u64 mfc_rm_boundary; /* 0x900 */ + u8 pad_0x908_0x938[0x30]; /* 0x908 */ + u64 smf_dma_signal_sel; /* 0x938 */ +#define mfc_dma1_mask_lsb 41 +#define mfc_dma1_shift (63 - mfc_dma1_mask_lsb) +#define mfc_dma1_mask (0x3LL << mfc_dma1_shift) +#define mfc_dma1_bits (0x1LL << mfc_dma1_shift) +#define mfc_dma2_mask_lsb 43 +#define mfc_dma2_shift (63 - mfc_dma2_mask_lsb) +#define mfc_dma2_mask (0x3LL << mfc_dma2_shift) +#define mfc_dma2_bits (0x1LL << mfc_dma2_shift) + u8 pad_0x940_0xa38[0xf8]; /* 0x940 */ + u64 smm_signal_sel; /* 0xa38 */ +#define smm_sig_mask_lsb 12 +#define smm_sig_shift (63 - smm_sig_mask_lsb) +#define smm_sig_mask (0x3LL << smm_sig_shift) +#define smm_sig_bus0_bits (0x2LL << smm_sig_shift) +#define smm_sig_bus2_bits (0x1LL << smm_sig_shift) + u8 pad_0xa40_0xc00[0xc00 - 0xa40]; /* 0xa40 */ + + /* DMA Command Error Area */ + u64 mfc_cer_R; /* 0xc00 */ +#define MFC_CER_Q (1 << 31) +#define MFC_CER_SPU_QUEUE MFC_CER_Q + u8 pad_0xc08_0x1000[0x1000 - 0xc08]; /* 0xc08 */ + + /* PV1_ImplRegs: Implementation-dependent privileged-state 1 regs */ + /* DMA Command Error Area */ + u64 spu_ecc_cntl_RW; /* 0x1000 */ +#define SPU_ECC_CNTL_E (1ull << 0ull) +#define SPU_ECC_CNTL_ENABLE SPU_ECC_CNTL_E +#define SPU_ECC_CNTL_DISABLE (~SPU_ECC_CNTL_E & 1L) +#define SPU_ECC_CNTL_S (1ull << 1ull) +#define SPU_ECC_STOP_AFTER_ERROR SPU_ECC_CNTL_S +#define SPU_ECC_CONTINUE_AFTER_ERROR (~SPU_ECC_CNTL_S & 2L) +#define SPU_ECC_CNTL_B (1ull << 2ull) +#define SPU_ECC_BACKGROUND_ENABLE SPU_ECC_CNTL_B +#define SPU_ECC_BACKGROUND_DISABLE (~SPU_ECC_CNTL_B & 4L) +#define SPU_ECC_CNTL_I_SHIFT 3ull +#define SPU_ECC_CNTL_I_MASK (3ull << SPU_ECC_CNTL_I_SHIFT) +#define SPU_ECC_WRITE_ALWAYS (~SPU_ECC_CNTL_I & 12L) +#define SPU_ECC_WRITE_CORRECTABLE (1ull << SPU_ECC_CNTL_I_SHIFT) +#define SPU_ECC_WRITE_UNCORRECTABLE (3ull << SPU_ECC_CNTL_I_SHIFT) +#define SPU_ECC_CNTL_D (1ull << 5ull) +#define SPU_ECC_DETECTION_ENABLE SPU_ECC_CNTL_D +#define SPU_ECC_DETECTION_DISABLE (~SPU_ECC_CNTL_D & 32L) + u64 spu_ecc_stat_RW; /* 0x1008 */ +#define SPU_ECC_CORRECTED_ERROR (1ull << 0ul) +#define SPU_ECC_UNCORRECTED_ERROR (1ull << 1ul) +#define SPU_ECC_SCRUB_COMPLETE (1ull << 2ul) +#define SPU_ECC_SCRUB_IN_PROGRESS (1ull << 3ul) +#define SPU_ECC_INSTRUCTION_ERROR (1ull << 4ul) +#define SPU_ECC_DATA_ERROR (1ull << 5ul) +#define SPU_ECC_DMA_ERROR (1ull << 6ul) +#define SPU_ECC_STATUS_CNT_MASK (256ull << 8) + u64 spu_ecc_addr_RW; /* 0x1010 */ + u64 spu_err_mask_RW; /* 0x1018 */ +#define SPU_ERR_ILLEGAL_INSTR (1ull << 0ul) +#define SPU_ERR_ILLEGAL_CHANNEL (1ull << 1ul) + u8 pad_0x1020_0x1028[0x1028 - 0x1020]; /* 0x1020 */ + + /* SPU Debug-Trace Bus (DTB) Selection Registers */ + u64 spu_trig0_sel; /* 0x1028 */ + u64 spu_trig1_sel; /* 0x1030 */ + u64 spu_trig2_sel; /* 0x1038 */ + u64 spu_trig3_sel; /* 0x1040 */ + u64 spu_trace_sel; /* 0x1048 */ +#define spu_trace_sel_mask 0x1f1fLL +#define spu_trace_sel_bus0_bits 0x1000LL +#define spu_trace_sel_bus2_bits 0x0010LL + u64 spu_event0_sel; /* 0x1050 */ + u64 spu_event1_sel; /* 0x1058 */ + u64 spu_event2_sel; /* 0x1060 */ + u64 spu_event3_sel; /* 0x1068 */ + u64 spu_trace_cntl; /* 0x1070 */ +} __attribute__ ((aligned(0x2000))); + +#endif /* __KERNEL__ */ +#endif diff --git a/arch/powerpc/include/asm/spu_csa.h b/arch/powerpc/include/asm/spu_csa.h new file mode 100644 index 000000000000..a40fd491250c --- /dev/null +++ b/arch/powerpc/include/asm/spu_csa.h @@ -0,0 +1,266 @@ +/* + * spu_csa.h: Definitions for SPU context save area (CSA). + * + * (C) Copyright IBM 2005 + * + * Author: Mark Nutter + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPU_CSA_H_ +#define _SPU_CSA_H_ +#ifdef __KERNEL__ + +/* + * Total number of 128-bit registers. + */ +#define NR_SPU_GPRS 128 +#define NR_SPU_SPRS 9 +#define NR_SPU_REGS_PAD 7 +#define NR_SPU_SPILL_REGS 144 /* GPRS + SPRS + PAD */ +#define SIZEOF_SPU_SPILL_REGS NR_SPU_SPILL_REGS * 16 + +#define SPU_SAVE_COMPLETE 0x3FFB +#define SPU_RESTORE_COMPLETE 0x3FFC + +/* + * Definitions for various 'stopped' status conditions, + * to be recreated during context restore. + */ +#define SPU_STOPPED_STATUS_P 1 +#define SPU_STOPPED_STATUS_I 2 +#define SPU_STOPPED_STATUS_H 3 +#define SPU_STOPPED_STATUS_S 4 +#define SPU_STOPPED_STATUS_S_I 5 +#define SPU_STOPPED_STATUS_S_P 6 +#define SPU_STOPPED_STATUS_P_H 7 +#define SPU_STOPPED_STATUS_P_I 8 +#define SPU_STOPPED_STATUS_R 9 + +/* + * Definitions for software decrementer status flag. + */ +#define SPU_DECR_STATUS_RUNNING 0x1 +#define SPU_DECR_STATUS_WRAPPED 0x2 + +#ifndef __ASSEMBLY__ +/** + * spu_reg128 - generic 128-bit register definition. + */ +struct spu_reg128 { + u32 slot[4]; +}; + +/** + * struct spu_lscsa - Local Store Context Save Area. + * @gprs: Array of saved registers. + * @fpcr: Saved floating point status control register. + * @decr: Saved decrementer value. + * @decr_status: Indicates software decrementer status flags. + * @ppu_mb: Saved PPU mailbox data. + * @ppuint_mb: Saved PPU interrupting mailbox data. + * @tag_mask: Saved tag group mask. + * @event_mask: Saved event mask. + * @srr0: Saved SRR0. + * @stopped_status: Conditions to be recreated by restore. + * @ls: Saved contents of Local Storage Area. + * + * The LSCSA represents state that is primarily saved and + * restored by SPU-side code. + */ +struct spu_lscsa { + struct spu_reg128 gprs[128]; + struct spu_reg128 fpcr; + struct spu_reg128 decr; + struct spu_reg128 decr_status; + struct spu_reg128 ppu_mb; + struct spu_reg128 ppuint_mb; + struct spu_reg128 tag_mask; + struct spu_reg128 event_mask; + struct spu_reg128 srr0; + struct spu_reg128 stopped_status; + + /* + * 'ls' must be page-aligned on all configurations. + * Since we don't want to rely on having the spu-gcc + * installed to build the kernel and this structure + * is used in the SPU-side code, make it 64k-page + * aligned for now. + */ + unsigned char ls[LS_SIZE] __attribute__((aligned(65536))); +}; + +#ifndef __SPU__ +/* + * struct spu_problem_collapsed - condensed problem state area, w/o pads. + */ +struct spu_problem_collapsed { + u64 spc_mssync_RW; + u32 mfc_lsa_W; + u32 unused_pad0; + u64 mfc_ea_W; + union mfc_tag_size_class_cmd mfc_union_W; + u32 dma_qstatus_R; + u32 dma_querytype_RW; + u32 dma_querymask_RW; + u32 dma_tagstatus_R; + u32 pu_mb_R; + u32 spu_mb_W; + u32 mb_stat_R; + u32 spu_runcntl_RW; + u32 spu_status_R; + u32 spu_spc_R; + u32 spu_npc_RW; + u32 signal_notify1; + u32 signal_notify2; + u32 unused_pad1; +}; + +/* + * struct spu_priv1_collapsed - condensed privileged 1 area, w/o pads. + */ +struct spu_priv1_collapsed { + u64 mfc_sr1_RW; + u64 mfc_lpid_RW; + u64 spu_idr_RW; + u64 mfc_vr_RO; + u64 spu_vr_RO; + u64 int_mask_class0_RW; + u64 int_mask_class1_RW; + u64 int_mask_class2_RW; + u64 int_stat_class0_RW; + u64 int_stat_class1_RW; + u64 int_stat_class2_RW; + u64 int_route_RW; + u64 mfc_atomic_flush_RW; + u64 resource_allocation_groupID_RW; + u64 resource_allocation_enable_RW; + u64 mfc_fir_R; + u64 mfc_fir_status_or_W; + u64 mfc_fir_status_and_W; + u64 mfc_fir_mask_R; + u64 mfc_fir_mask_or_W; + u64 mfc_fir_mask_and_W; + u64 mfc_fir_chkstp_enable_RW; + u64 smf_sbi_signal_sel; + u64 smf_ato_signal_sel; + u64 tlb_index_hint_RO; + u64 tlb_index_W; + u64 tlb_vpn_RW; + u64 tlb_rpn_RW; + u64 tlb_invalidate_entry_W; + u64 tlb_invalidate_all_W; + u64 smm_hid; + u64 mfc_accr_RW; + u64 mfc_dsisr_RW; + u64 mfc_dar_RW; + u64 rmt_index_RW; + u64 rmt_data1_RW; + u64 mfc_dsir_R; + u64 mfc_lsacr_RW; + u64 mfc_lscrr_R; + u64 mfc_tclass_id_RW; + u64 mfc_rm_boundary; + u64 smf_dma_signal_sel; + u64 smm_signal_sel; + u64 mfc_cer_R; + u64 pu_ecc_cntl_RW; + u64 pu_ecc_stat_RW; + u64 spu_ecc_addr_RW; + u64 spu_err_mask_RW; + u64 spu_trig0_sel; + u64 spu_trig1_sel; + u64 spu_trig2_sel; + u64 spu_trig3_sel; + u64 spu_trace_sel; + u64 spu_event0_sel; + u64 spu_event1_sel; + u64 spu_event2_sel; + u64 spu_event3_sel; + u64 spu_trace_cntl; +}; + +/* + * struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads. + */ +struct spu_priv2_collapsed { + u64 slb_index_W; + u64 slb_esid_RW; + u64 slb_vsid_RW; + u64 slb_invalidate_entry_W; + u64 slb_invalidate_all_W; + struct mfc_cq_sr spuq[16]; + struct mfc_cq_sr puq[8]; + u64 mfc_control_RW; + u64 puint_mb_R; + u64 spu_privcntl_RW; + u64 spu_lslr_RW; + u64 spu_chnlcntptr_RW; + u64 spu_chnlcnt_RW; + u64 spu_chnldata_RW; + u64 spu_cfg_RW; + u64 spu_tag_status_query_RW; + u64 spu_cmd_buf1_RW; + u64 spu_cmd_buf2_RW; + u64 spu_atomic_status_RW; +}; + +/** + * struct spu_state + * @lscsa: Local Store Context Save Area. + * @prob: Collapsed Problem State Area, w/o pads. + * @priv1: Collapsed Privileged 1 Area, w/o pads. + * @priv2: Collapsed Privileged 2 Area, w/o pads. + * @spu_chnlcnt_RW: Array of saved channel counts. + * @spu_chnldata_RW: Array of saved channel data. + * @suspend_time: Time stamp when decrementer disabled. + * + * Structure representing the whole of the SPU + * context save area (CSA). This struct contains + * all of the state necessary to suspend and then + * later optionally resume execution of an SPU + * context. + * + * The @lscsa region is by far the largest, and is + * allocated separately so that it may either be + * pinned or mapped to/from application memory, as + * appropriate for the OS environment. + */ +struct spu_state { + struct spu_lscsa *lscsa; +#ifdef CONFIG_SPU_FS_64K_LS + int use_big_pages; + /* One struct page per 64k page */ +#define SPU_LSCSA_NUM_BIG_PAGES (sizeof(struct spu_lscsa) / 0x10000) + struct page *lscsa_pages[SPU_LSCSA_NUM_BIG_PAGES]; +#endif + struct spu_problem_collapsed prob; + struct spu_priv1_collapsed priv1; + struct spu_priv2_collapsed priv2; + u64 spu_chnlcnt_RW[32]; + u64 spu_chnldata_RW[32]; + u32 spu_mailbox_data[4]; + u32 pu_mailbox_data[1]; + u64 class_0_dar, class_0_pending; + u64 class_1_dar, class_1_dsisr; + unsigned long suspend_time; + spinlock_t register_lock; +}; + +#endif /* !__SPU__ */ +#endif /* __KERNEL__ */ +#endif /* !__ASSEMBLY__ */ +#endif /* _SPU_CSA_H_ */ diff --git a/arch/powerpc/include/asm/spu_info.h b/arch/powerpc/include/asm/spu_info.h new file mode 100644 index 000000000000..3545efbf9891 --- /dev/null +++ b/arch/powerpc/include/asm/spu_info.h @@ -0,0 +1,54 @@ +/* + * SPU info structures + * + * (C) Copyright 2006 IBM Corp. + * + * Author: Dwayne Grant McConnell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPU_INFO_H +#define _SPU_INFO_H + +#ifdef __KERNEL__ +#include +#include +#else +struct mfc_cq_sr { + __u64 mfc_cq_data0_RW; + __u64 mfc_cq_data1_RW; + __u64 mfc_cq_data2_RW; + __u64 mfc_cq_data3_RW; +}; +#endif /* __KERNEL__ */ + +struct spu_dma_info { + __u64 dma_info_type; + __u64 dma_info_mask; + __u64 dma_info_status; + __u64 dma_info_stall_and_notify; + __u64 dma_info_atomic_command_status; + struct mfc_cq_sr dma_info_command_data[16]; +}; + +struct spu_proxydma_info { + __u64 proxydma_info_type; + __u64 proxydma_info_mask; + __u64 proxydma_info_status; + struct mfc_cq_sr proxydma_info_command_data[8]; +}; + +#endif diff --git a/arch/powerpc/include/asm/spu_priv1.h b/arch/powerpc/include/asm/spu_priv1.h new file mode 100644 index 000000000000..25020a34ce7f --- /dev/null +++ b/arch/powerpc/include/asm/spu_priv1.h @@ -0,0 +1,236 @@ +/* + * Defines an spu hypervisor abstraction layer. + * + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if !defined(_SPU_PRIV1_H) +#define _SPU_PRIV1_H +#if defined(__KERNEL__) + +#include + +struct spu; +struct spu_context; + +/* access to priv1 registers */ + +struct spu_priv1_ops { + void (*int_mask_and) (struct spu *spu, int class, u64 mask); + void (*int_mask_or) (struct spu *spu, int class, u64 mask); + void (*int_mask_set) (struct spu *spu, int class, u64 mask); + u64 (*int_mask_get) (struct spu *spu, int class); + void (*int_stat_clear) (struct spu *spu, int class, u64 stat); + u64 (*int_stat_get) (struct spu *spu, int class); + void (*cpu_affinity_set) (struct spu *spu, int cpu); + u64 (*mfc_dar_get) (struct spu *spu); + u64 (*mfc_dsisr_get) (struct spu *spu); + void (*mfc_dsisr_set) (struct spu *spu, u64 dsisr); + void (*mfc_sdr_setup) (struct spu *spu); + void (*mfc_sr1_set) (struct spu *spu, u64 sr1); + u64 (*mfc_sr1_get) (struct spu *spu); + void (*mfc_tclass_id_set) (struct spu *spu, u64 tclass_id); + u64 (*mfc_tclass_id_get) (struct spu *spu); + void (*tlb_invalidate) (struct spu *spu); + void (*resource_allocation_groupID_set) (struct spu *spu, u64 id); + u64 (*resource_allocation_groupID_get) (struct spu *spu); + void (*resource_allocation_enable_set) (struct spu *spu, u64 enable); + u64 (*resource_allocation_enable_get) (struct spu *spu); +}; + +extern const struct spu_priv1_ops* spu_priv1_ops; + +static inline void +spu_int_mask_and (struct spu *spu, int class, u64 mask) +{ + spu_priv1_ops->int_mask_and(spu, class, mask); +} + +static inline void +spu_int_mask_or (struct spu *spu, int class, u64 mask) +{ + spu_priv1_ops->int_mask_or(spu, class, mask); +} + +static inline void +spu_int_mask_set (struct spu *spu, int class, u64 mask) +{ + spu_priv1_ops->int_mask_set(spu, class, mask); +} + +static inline u64 +spu_int_mask_get (struct spu *spu, int class) +{ + return spu_priv1_ops->int_mask_get(spu, class); +} + +static inline void +spu_int_stat_clear (struct spu *spu, int class, u64 stat) +{ + spu_priv1_ops->int_stat_clear(spu, class, stat); +} + +static inline u64 +spu_int_stat_get (struct spu *spu, int class) +{ + return spu_priv1_ops->int_stat_get (spu, class); +} + +static inline void +spu_cpu_affinity_set (struct spu *spu, int cpu) +{ + spu_priv1_ops->cpu_affinity_set(spu, cpu); +} + +static inline u64 +spu_mfc_dar_get (struct spu *spu) +{ + return spu_priv1_ops->mfc_dar_get(spu); +} + +static inline u64 +spu_mfc_dsisr_get (struct spu *spu) +{ + return spu_priv1_ops->mfc_dsisr_get(spu); +} + +static inline void +spu_mfc_dsisr_set (struct spu *spu, u64 dsisr) +{ + spu_priv1_ops->mfc_dsisr_set(spu, dsisr); +} + +static inline void +spu_mfc_sdr_setup (struct spu *spu) +{ + spu_priv1_ops->mfc_sdr_setup(spu); +} + +static inline void +spu_mfc_sr1_set (struct spu *spu, u64 sr1) +{ + spu_priv1_ops->mfc_sr1_set(spu, sr1); +} + +static inline u64 +spu_mfc_sr1_get (struct spu *spu) +{ + return spu_priv1_ops->mfc_sr1_get(spu); +} + +static inline void +spu_mfc_tclass_id_set (struct spu *spu, u64 tclass_id) +{ + spu_priv1_ops->mfc_tclass_id_set(spu, tclass_id); +} + +static inline u64 +spu_mfc_tclass_id_get (struct spu *spu) +{ + return spu_priv1_ops->mfc_tclass_id_get(spu); +} + +static inline void +spu_tlb_invalidate (struct spu *spu) +{ + spu_priv1_ops->tlb_invalidate(spu); +} + +static inline void +spu_resource_allocation_groupID_set (struct spu *spu, u64 id) +{ + spu_priv1_ops->resource_allocation_groupID_set(spu, id); +} + +static inline u64 +spu_resource_allocation_groupID_get (struct spu *spu) +{ + return spu_priv1_ops->resource_allocation_groupID_get(spu); +} + +static inline void +spu_resource_allocation_enable_set (struct spu *spu, u64 enable) +{ + spu_priv1_ops->resource_allocation_enable_set(spu, enable); +} + +static inline u64 +spu_resource_allocation_enable_get (struct spu *spu) +{ + return spu_priv1_ops->resource_allocation_enable_get(spu); +} + +/* spu management abstraction */ + +struct spu_management_ops { + int (*enumerate_spus)(int (*fn)(void *data)); + int (*create_spu)(struct spu *spu, void *data); + int (*destroy_spu)(struct spu *spu); + void (*enable_spu)(struct spu_context *ctx); + void (*disable_spu)(struct spu_context *ctx); + int (*init_affinity)(void); +}; + +extern const struct spu_management_ops* spu_management_ops; + +static inline int +spu_enumerate_spus (int (*fn)(void *data)) +{ + return spu_management_ops->enumerate_spus(fn); +} + +static inline int +spu_create_spu (struct spu *spu, void *data) +{ + return spu_management_ops->create_spu(spu, data); +} + +static inline int +spu_destroy_spu (struct spu *spu) +{ + return spu_management_ops->destroy_spu(spu); +} + +static inline int +spu_init_affinity (void) +{ + return spu_management_ops->init_affinity(); +} + +static inline void +spu_enable_spu (struct spu_context *ctx) +{ + spu_management_ops->enable_spu(ctx); +} + +static inline void +spu_disable_spu (struct spu_context *ctx) +{ + spu_management_ops->disable_spu(ctx); +} + +/* + * The declarations folowing are put here for convenience + * and only intended to be used by the platform setup code. + */ + +extern const struct spu_priv1_ops spu_priv1_mmio_ops; +extern const struct spu_priv1_ops spu_priv1_beat_ops; + +extern const struct spu_management_ops spu_management_of_ops; + +#endif /* __KERNEL__ */ +#endif diff --git a/arch/powerpc/include/asm/sstep.h b/arch/powerpc/include/asm/sstep.h new file mode 100644 index 000000000000..f593b0f9b627 --- /dev/null +++ b/arch/powerpc/include/asm/sstep.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2004 Paul Mackerras , IBM + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +struct pt_regs; + +/* + * We don't allow single-stepping an mtmsrd that would clear + * MSR_RI, since that would make the exception unrecoverable. + * Since we need to single-step to proceed from a breakpoint, + * we don't allow putting a breakpoint on an mtmsrd instruction. + * Similarly we don't allow breakpoints on rfid instructions. + * These macros tell us if an instruction is a mtmsrd or rfid. + * Note that IS_MTMSRD returns true for both an mtmsr (32-bit) + * and an mtmsrd (64-bit). + */ +#define IS_MTMSRD(instr) (((instr) & 0xfc0007be) == 0x7c000124) +#define IS_RFID(instr) (((instr) & 0xfc0007fe) == 0x4c000024) +#define IS_RFI(instr) (((instr) & 0xfc0007fe) == 0x4c000064) + +/* Emulate instructions that cause a transfer of control. */ +extern int emulate_step(struct pt_regs *regs, unsigned int instr); diff --git a/arch/powerpc/include/asm/stat.h b/arch/powerpc/include/asm/stat.h new file mode 100644 index 000000000000..e4edc510b530 --- /dev/null +++ b/arch/powerpc/include/asm/stat.h @@ -0,0 +1,81 @@ +#ifndef _ASM_POWERPC_STAT_H +#define _ASM_POWERPC_STAT_H +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include + +#define STAT_HAVE_NSEC 1 + +#ifndef __powerpc64__ +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; +#endif /* !__powerpc64__ */ + +struct stat { + unsigned long st_dev; + ino_t st_ino; +#ifdef __powerpc64__ + nlink_t st_nlink; + mode_t st_mode; +#else + mode_t st_mode; + nlink_t st_nlink; +#endif + uid_t st_uid; + gid_t st_gid; + unsigned long st_rdev; + off_t st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +#ifdef __powerpc64__ + unsigned long __unused6; +#endif +}; + +/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */ +struct stat64 { + unsigned long long st_dev; /* Device. */ + unsigned long long st_ino; /* File serial number. */ + unsigned int st_mode; /* File mode. */ + unsigned int st_nlink; /* Link count. */ + unsigned int st_uid; /* User ID of the file's owner. */ + unsigned int st_gid; /* Group ID of the file's group. */ + unsigned long long st_rdev; /* Device number, if device. */ + unsigned short __pad2; + long long st_size; /* Size of file, in bytes. */ + int st_blksize; /* Optimal block size for I/O. */ + long long st_blocks; /* Number 512-byte blocks allocated. */ + int st_atime; /* Time of last access. */ + unsigned int st_atime_nsec; + int st_mtime; /* Time of last modification. */ + unsigned int st_mtime_nsec; + int st_ctime; /* Time of last status change. */ + unsigned int st_ctime_nsec; + unsigned int __unused4; + unsigned int __unused5; +}; + +#endif /* _ASM_POWERPC_STAT_H */ diff --git a/arch/powerpc/include/asm/statfs.h b/arch/powerpc/include/asm/statfs.h new file mode 100644 index 000000000000..67024026c10d --- /dev/null +++ b/arch/powerpc/include/asm/statfs.h @@ -0,0 +1,60 @@ +#ifndef _ASM_POWERPC_STATFS_H +#define _ASM_POWERPC_STATFS_H + +/* For ppc32 we just use the generic definitions, not so simple on ppc64 */ + +#ifndef __powerpc64__ +#include +#else + +#ifndef __KERNEL_STRICT_NAMES +#include +typedef __kernel_fsid_t fsid_t; +#endif + +/* + * We're already 64-bit, so duplicate the definition + */ +struct statfs { + long f_type; + long f_bsize; + long f_blocks; + long f_bfree; + long f_bavail; + long f_files; + long f_ffree; + __kernel_fsid_t f_fsid; + long f_namelen; + long f_frsize; + long f_spare[5]; +}; + +struct statfs64 { + long f_type; + long f_bsize; + long f_blocks; + long f_bfree; + long f_bavail; + long f_files; + long f_ffree; + __kernel_fsid_t f_fsid; + long f_namelen; + long f_frsize; + long f_spare[5]; +}; + +struct compat_statfs64 { + __u32 f_type; + __u32 f_bsize; + __u64 f_blocks; + __u64 f_bfree; + __u64 f_bavail; + __u64 f_files; + __u64 f_ffree; + __kernel_fsid_t f_fsid; + __u32 f_namelen; + __u32 f_frsize; + __u32 f_spare[5]; +}; +#endif /* ! __powerpc64__ */ +#endif diff --git a/arch/powerpc/include/asm/string.h b/arch/powerpc/include/asm/string.h new file mode 100644 index 000000000000..e40010abcaf1 --- /dev/null +++ b/arch/powerpc/include/asm/string.h @@ -0,0 +1,32 @@ +#ifndef _ASM_POWERPC_STRING_H +#define _ASM_POWERPC_STRING_H + +#ifdef __KERNEL__ + +#define __HAVE_ARCH_STRCPY +#define __HAVE_ARCH_STRNCPY +#define __HAVE_ARCH_STRLEN +#define __HAVE_ARCH_STRCMP +#define __HAVE_ARCH_STRNCMP +#define __HAVE_ARCH_STRCAT +#define __HAVE_ARCH_MEMSET +#define __HAVE_ARCH_MEMCPY +#define __HAVE_ARCH_MEMMOVE +#define __HAVE_ARCH_MEMCMP +#define __HAVE_ARCH_MEMCHR + +extern char * strcpy(char *,const char *); +extern char * strncpy(char *,const char *, __kernel_size_t); +extern __kernel_size_t strlen(const char *); +extern int strcmp(const char *,const char *); +extern int strncmp(const char *, const char *, __kernel_size_t); +extern char * strcat(char *, const char *); +extern void * memset(void *,int,__kernel_size_t); +extern void * memcpy(void *,const void *,__kernel_size_t); +extern void * memmove(void *,const void *,__kernel_size_t); +extern int memcmp(const void *,const void *,__kernel_size_t); +extern void * memchr(const void *,int,__kernel_size_t); + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_STRING_H */ diff --git a/arch/powerpc/include/asm/suspend.h b/arch/powerpc/include/asm/suspend.h new file mode 100644 index 000000000000..cbf2c9404c37 --- /dev/null +++ b/arch/powerpc/include/asm/suspend.h @@ -0,0 +1,9 @@ +#ifndef __ASM_POWERPC_SUSPEND_H +#define __ASM_POWERPC_SUSPEND_H + +static inline int arch_prepare_suspend(void) { return 0; } + +void save_processor_state(void); +void restore_processor_state(void); + +#endif /* __ASM_POWERPC_SUSPEND_H */ diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h new file mode 100644 index 000000000000..45963e80f557 --- /dev/null +++ b/arch/powerpc/include/asm/synch.h @@ -0,0 +1,44 @@ +#ifndef _ASM_POWERPC_SYNCH_H +#define _ASM_POWERPC_SYNCH_H +#ifdef __KERNEL__ + +#include +#include + +#ifndef __ASSEMBLY__ +extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup; +extern void do_lwsync_fixups(unsigned long value, void *fixup_start, + void *fixup_end); + +static inline void eieio(void) +{ + __asm__ __volatile__ ("eieio" : : : "memory"); +} + +static inline void isync(void) +{ + __asm__ __volatile__ ("isync" : : : "memory"); +} +#endif /* __ASSEMBLY__ */ + +#if defined(__powerpc64__) +# define LWSYNC lwsync +#elif defined(CONFIG_E500) +# define LWSYNC \ + START_LWSYNC_SECTION(96); \ + sync; \ + MAKE_LWSYNC_SECTION_ENTRY(96, __lwsync_fixup); +#else +# define LWSYNC sync +#endif + +#ifdef CONFIG_SMP +#define ISYNC_ON_SMP "\n\tisync\n" +#define LWSYNC_ON_SMP stringify_in_c(LWSYNC) "\n" +#else +#define ISYNC_ON_SMP +#define LWSYNC_ON_SMP +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SYNCH_H */ diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h new file mode 100644 index 000000000000..efa7f0b879f3 --- /dev/null +++ b/arch/powerpc/include/asm/syscall.h @@ -0,0 +1,84 @@ +/* + * Access to user system call parameters and results + * + * Copyright (C) 2008 Red Hat, Inc. All rights reserved. + * + * This copyrighted material is made available to anyone wishing to use, + * modify, copy, or redistribute it subject to the terms and conditions + * of the GNU General Public License v.2. + * + * See asm-generic/syscall.h for descriptions of what we must do here. + */ + +#ifndef _ASM_SYSCALL_H +#define _ASM_SYSCALL_H 1 + +#include + +static inline long syscall_get_nr(struct task_struct *task, + struct pt_regs *regs) +{ + return TRAP(regs) == 0xc00 ? regs->gpr[0] : -1L; +} + +static inline void syscall_rollback(struct task_struct *task, + struct pt_regs *regs) +{ + regs->gpr[3] = regs->orig_gpr3; +} + +static inline long syscall_get_error(struct task_struct *task, + struct pt_regs *regs) +{ + return (regs->ccr & 0x1000) ? -regs->gpr[3] : 0; +} + +static inline long syscall_get_return_value(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->gpr[3]; +} + +static inline void syscall_set_return_value(struct task_struct *task, + struct pt_regs *regs, + int error, long val) +{ + if (error) { + regs->ccr |= 0x1000L; + regs->gpr[3] = -error; + } else { + regs->ccr &= ~0x1000L; + regs->gpr[3] = val; + } +} + +static inline void syscall_get_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + unsigned long *args) +{ + BUG_ON(i + n > 6); +#ifdef CONFIG_PPC64 + if (test_tsk_thread_flag(task, TIF_32BIT)) { + /* + * Zero-extend 32-bit argument values. The high bits are + * garbage ignored by the actual syscall dispatch. + */ + while (n-- > 0) + args[n] = (u32) regs->gpr[3 + i + n]; + return; + } +#endif + memcpy(args, ®s->gpr[3 + i], n * sizeof(args[0])); +} + +static inline void syscall_set_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + const unsigned long *args) +{ + BUG_ON(i + n > 6); + memcpy(®s->gpr[3 + i], args, n * sizeof(args[0])); +} + +#endif /* _ASM_SYSCALL_H */ diff --git a/arch/powerpc/include/asm/syscalls.h b/arch/powerpc/include/asm/syscalls.h new file mode 100644 index 000000000000..eb8eb400c664 --- /dev/null +++ b/arch/powerpc/include/asm/syscalls.h @@ -0,0 +1,52 @@ +#ifndef __ASM_POWERPC_SYSCALLS_H +#define __ASM_POWERPC_SYSCALLS_H +#ifdef __KERNEL__ + +#include +#include +#include +#include + +struct new_utsname; +struct pt_regs; +struct rtas_args; +struct sigaction; + +asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len, + unsigned long prot, unsigned long flags, + unsigned long fd, off_t offset); +asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff); +asmlinkage int sys_execve(unsigned long a0, unsigned long a1, + unsigned long a2, unsigned long a3, unsigned long a4, + unsigned long a5, struct pt_regs *regs); +asmlinkage int sys_clone(unsigned long clone_flags, unsigned long usp, + int __user *parent_tidp, void __user *child_threadptr, + int __user *child_tidp, int p6, struct pt_regs *regs); +asmlinkage int sys_fork(unsigned long p1, unsigned long p2, + unsigned long p3, unsigned long p4, unsigned long p5, + unsigned long p6, struct pt_regs *regs); +asmlinkage int sys_vfork(unsigned long p1, unsigned long p2, + unsigned long p3, unsigned long p4, unsigned long p5, + unsigned long p6, struct pt_regs *regs); +asmlinkage long sys_pipe(int __user *fildes); +asmlinkage long sys_pipe2(int __user *fildes, int flags); +asmlinkage long sys_rt_sigaction(int sig, + const struct sigaction __user *act, + struct sigaction __user *oact, size_t sigsetsize); +asmlinkage int sys_ipc(uint call, int first, unsigned long second, + long third, void __user *ptr, long fifth); +asmlinkage long ppc64_personality(unsigned long personality); +asmlinkage int ppc_rtas(struct rtas_args __user *uargs); +asmlinkage time_t sys64_time(time_t __user * tloc); +asmlinkage long ppc_newuname(struct new_utsname __user * name); + +asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, + size_t sigsetsize); +asmlinkage long sys_sigaltstack(const stack_t __user *uss, + stack_t __user *uoss, unsigned long r5, unsigned long r6, + unsigned long r7, unsigned long r8, struct pt_regs *regs); + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_SYSCALLS_H */ diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h new file mode 100644 index 000000000000..e084272ed1c2 --- /dev/null +++ b/arch/powerpc/include/asm/systbl.h @@ -0,0 +1,324 @@ +/* + * List of powerpc syscalls. For the meaning of the _SPU suffix see + * arch/powerpc/platforms/cell/spu_callbacks.c + */ + +SYSCALL(restart_syscall) +SYSCALL(exit) +PPC_SYS(fork) +SYSCALL_SPU(read) +SYSCALL_SPU(write) +COMPAT_SYS_SPU(open) +SYSCALL_SPU(close) +COMPAT_SYS_SPU(waitpid) +COMPAT_SYS_SPU(creat) +SYSCALL_SPU(link) +SYSCALL_SPU(unlink) +COMPAT_SYS(execve) +SYSCALL_SPU(chdir) +COMPAT_SYS_SPU(time) +SYSCALL_SPU(mknod) +SYSCALL_SPU(chmod) +SYSCALL_SPU(lchown) +SYSCALL(ni_syscall) +OLDSYS(stat) +SYSX_SPU(sys_lseek,ppc32_lseek,sys_lseek) +SYSCALL_SPU(getpid) +COMPAT_SYS(mount) +SYSX(sys_ni_syscall,sys_oldumount,sys_oldumount) +SYSCALL_SPU(setuid) +SYSCALL_SPU(getuid) +COMPAT_SYS_SPU(stime) +COMPAT_SYS(ptrace) +SYSCALL_SPU(alarm) +OLDSYS(fstat) +COMPAT_SYS(pause) +COMPAT_SYS(utime) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +COMPAT_SYS_SPU(access) +COMPAT_SYS_SPU(nice) +SYSCALL(ni_syscall) +SYSCALL_SPU(sync) +COMPAT_SYS_SPU(kill) +SYSCALL_SPU(rename) +COMPAT_SYS_SPU(mkdir) +SYSCALL_SPU(rmdir) +SYSCALL_SPU(dup) +SYSCALL_SPU(pipe) +COMPAT_SYS_SPU(times) +SYSCALL(ni_syscall) +SYSCALL_SPU(brk) +SYSCALL_SPU(setgid) +SYSCALL_SPU(getgid) +SYSCALL(signal) +SYSCALL_SPU(geteuid) +SYSCALL_SPU(getegid) +SYSCALL(acct) +SYSCALL(umount) +SYSCALL(ni_syscall) +COMPAT_SYS_SPU(ioctl) +COMPAT_SYS_SPU(fcntl) +SYSCALL(ni_syscall) +COMPAT_SYS_SPU(setpgid) +SYSCALL(ni_syscall) +SYSX(sys_ni_syscall,sys_olduname, sys_olduname) +COMPAT_SYS_SPU(umask) +SYSCALL_SPU(chroot) +SYSCALL(ustat) +SYSCALL_SPU(dup2) +SYSCALL_SPU(getppid) +SYSCALL_SPU(getpgrp) +SYSCALL_SPU(setsid) +SYS32ONLY(sigaction) +SYSCALL_SPU(sgetmask) +COMPAT_SYS_SPU(ssetmask) +SYSCALL_SPU(setreuid) +SYSCALL_SPU(setregid) +SYS32ONLY(sigsuspend) +COMPAT_SYS(sigpending) +COMPAT_SYS_SPU(sethostname) +COMPAT_SYS_SPU(setrlimit) +COMPAT_SYS(old_getrlimit) +COMPAT_SYS_SPU(getrusage) +COMPAT_SYS_SPU(gettimeofday) +COMPAT_SYS_SPU(settimeofday) +COMPAT_SYS_SPU(getgroups) +COMPAT_SYS_SPU(setgroups) +SYSX(sys_ni_syscall,sys_ni_syscall,ppc_select) +SYSCALL_SPU(symlink) +OLDSYS(lstat) +COMPAT_SYS_SPU(readlink) +SYSCALL(uselib) +SYSCALL(swapon) +SYSCALL(reboot) +SYSX(sys_ni_syscall,old32_readdir,old_readdir) +SYSCALL_SPU(mmap) +SYSCALL_SPU(munmap) +SYSCALL_SPU(truncate) +SYSCALL_SPU(ftruncate) +SYSCALL_SPU(fchmod) +SYSCALL_SPU(fchown) +COMPAT_SYS_SPU(getpriority) +COMPAT_SYS_SPU(setpriority) +SYSCALL(ni_syscall) +COMPAT_SYS(statfs) +COMPAT_SYS(fstatfs) +SYSCALL(ni_syscall) +COMPAT_SYS_SPU(socketcall) +COMPAT_SYS_SPU(syslog) +COMPAT_SYS_SPU(setitimer) +COMPAT_SYS_SPU(getitimer) +COMPAT_SYS_SPU(newstat) +COMPAT_SYS_SPU(newlstat) +COMPAT_SYS_SPU(newfstat) +SYSX(sys_ni_syscall,sys_uname,sys_uname) +SYSCALL(ni_syscall) +SYSCALL_SPU(vhangup) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +COMPAT_SYS_SPU(wait4) +SYSCALL(swapoff) +COMPAT_SYS_SPU(sysinfo) +COMPAT_SYS(ipc) +SYSCALL_SPU(fsync) +SYS32ONLY(sigreturn) +PPC_SYS(clone) +COMPAT_SYS_SPU(setdomainname) +PPC_SYS_SPU(newuname) +SYSCALL(ni_syscall) +COMPAT_SYS_SPU(adjtimex) +SYSCALL_SPU(mprotect) +SYSX(sys_ni_syscall,compat_sys_sigprocmask,sys_sigprocmask) +SYSCALL(ni_syscall) +SYSCALL(init_module) +SYSCALL(delete_module) +SYSCALL(ni_syscall) +SYSCALL(quotactl) +COMPAT_SYS_SPU(getpgid) +SYSCALL_SPU(fchdir) +SYSCALL_SPU(bdflush) +COMPAT_SYS(sysfs) +SYSX_SPU(ppc64_personality,ppc64_personality,sys_personality) +SYSCALL(ni_syscall) +SYSCALL_SPU(setfsuid) +SYSCALL_SPU(setfsgid) +SYSCALL_SPU(llseek) +COMPAT_SYS_SPU(getdents) +SYSX_SPU(sys_select,ppc32_select,ppc_select) +SYSCALL_SPU(flock) +SYSCALL_SPU(msync) +COMPAT_SYS_SPU(readv) +COMPAT_SYS_SPU(writev) +COMPAT_SYS_SPU(getsid) +SYSCALL_SPU(fdatasync) +COMPAT_SYS(sysctl) +SYSCALL_SPU(mlock) +SYSCALL_SPU(munlock) +SYSCALL_SPU(mlockall) +SYSCALL_SPU(munlockall) +COMPAT_SYS_SPU(sched_setparam) +COMPAT_SYS_SPU(sched_getparam) +COMPAT_SYS_SPU(sched_setscheduler) +COMPAT_SYS_SPU(sched_getscheduler) +SYSCALL_SPU(sched_yield) +COMPAT_SYS_SPU(sched_get_priority_max) +COMPAT_SYS_SPU(sched_get_priority_min) +COMPAT_SYS_SPU(sched_rr_get_interval) +COMPAT_SYS_SPU(nanosleep) +SYSCALL_SPU(mremap) +SYSCALL_SPU(setresuid) +SYSCALL_SPU(getresuid) +SYSCALL(ni_syscall) +SYSCALL_SPU(poll) +COMPAT_SYS(nfsservctl) +SYSCALL_SPU(setresgid) +SYSCALL_SPU(getresgid) +COMPAT_SYS_SPU(prctl) +COMPAT_SYS(rt_sigreturn) +COMPAT_SYS(rt_sigaction) +COMPAT_SYS(rt_sigprocmask) +COMPAT_SYS(rt_sigpending) +COMPAT_SYS(rt_sigtimedwait) +COMPAT_SYS(rt_sigqueueinfo) +COMPAT_SYS(rt_sigsuspend) +COMPAT_SYS_SPU(pread64) +COMPAT_SYS_SPU(pwrite64) +SYSCALL_SPU(chown) +SYSCALL_SPU(getcwd) +SYSCALL_SPU(capget) +SYSCALL_SPU(capset) +COMPAT_SYS(sigaltstack) +SYSX_SPU(sys_sendfile64,compat_sys_sendfile,sys_sendfile) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +PPC_SYS(vfork) +COMPAT_SYS_SPU(getrlimit) +COMPAT_SYS_SPU(readahead) +SYS32ONLY(mmap2) +SYS32ONLY(truncate64) +SYS32ONLY(ftruncate64) +SYSX(sys_ni_syscall,sys_stat64,sys_stat64) +SYSX(sys_ni_syscall,sys_lstat64,sys_lstat64) +SYSX(sys_ni_syscall,sys_fstat64,sys_fstat64) +SYSCALL(pciconfig_read) +SYSCALL(pciconfig_write) +SYSCALL(pciconfig_iobase) +SYSCALL(ni_syscall) +SYSCALL_SPU(getdents64) +SYSCALL_SPU(pivot_root) +SYSX(sys_ni_syscall,compat_sys_fcntl64,sys_fcntl64) +SYSCALL_SPU(madvise) +SYSCALL_SPU(mincore) +SYSCALL_SPU(gettid) +SYSCALL_SPU(tkill) +SYSCALL_SPU(setxattr) +SYSCALL_SPU(lsetxattr) +SYSCALL_SPU(fsetxattr) +SYSCALL_SPU(getxattr) +SYSCALL_SPU(lgetxattr) +SYSCALL_SPU(fgetxattr) +SYSCALL_SPU(listxattr) +SYSCALL_SPU(llistxattr) +SYSCALL_SPU(flistxattr) +SYSCALL_SPU(removexattr) +SYSCALL_SPU(lremovexattr) +SYSCALL_SPU(fremovexattr) +COMPAT_SYS_SPU(futex) +COMPAT_SYS_SPU(sched_setaffinity) +COMPAT_SYS_SPU(sched_getaffinity) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYS32ONLY(sendfile64) +COMPAT_SYS_SPU(io_setup) +SYSCALL_SPU(io_destroy) +COMPAT_SYS_SPU(io_getevents) +COMPAT_SYS_SPU(io_submit) +SYSCALL_SPU(io_cancel) +SYSCALL(set_tid_address) +SYSX_SPU(sys_fadvise64,ppc32_fadvise64,sys_fadvise64) +SYSCALL(exit_group) +SYSX(sys_lookup_dcookie,ppc32_lookup_dcookie,sys_lookup_dcookie) +SYSCALL_SPU(epoll_create) +SYSCALL_SPU(epoll_ctl) +SYSCALL_SPU(epoll_wait) +SYSCALL_SPU(remap_file_pages) +SYSX_SPU(sys_timer_create,compat_sys_timer_create,sys_timer_create) +COMPAT_SYS_SPU(timer_settime) +COMPAT_SYS_SPU(timer_gettime) +SYSCALL_SPU(timer_getoverrun) +SYSCALL_SPU(timer_delete) +COMPAT_SYS_SPU(clock_settime) +COMPAT_SYS_SPU(clock_gettime) +COMPAT_SYS_SPU(clock_getres) +COMPAT_SYS_SPU(clock_nanosleep) +SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext) +COMPAT_SYS_SPU(tgkill) +COMPAT_SYS_SPU(utimes) +COMPAT_SYS_SPU(statfs64) +COMPAT_SYS_SPU(fstatfs64) +SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64) +PPC_SYS_SPU(rtas) +OLDSYS(debug_setcontext) +SYSCALL(ni_syscall) +COMPAT_SYS(migrate_pages) +COMPAT_SYS(mbind) +COMPAT_SYS(get_mempolicy) +COMPAT_SYS(set_mempolicy) +COMPAT_SYS(mq_open) +SYSCALL(mq_unlink) +COMPAT_SYS(mq_timedsend) +COMPAT_SYS(mq_timedreceive) +COMPAT_SYS(mq_notify) +COMPAT_SYS(mq_getsetattr) +COMPAT_SYS(kexec_load) +COMPAT_SYS(add_key) +COMPAT_SYS(request_key) +COMPAT_SYS(keyctl) +COMPAT_SYS(waitid) +COMPAT_SYS(ioprio_set) +COMPAT_SYS(ioprio_get) +SYSCALL(inotify_init) +SYSCALL(inotify_add_watch) +SYSCALL(inotify_rm_watch) +SYSCALL(spu_run) +SYSCALL(spu_create) +COMPAT_SYS(pselect6) +COMPAT_SYS(ppoll) +SYSCALL_SPU(unshare) +SYSCALL_SPU(splice) +SYSCALL_SPU(tee) +COMPAT_SYS_SPU(vmsplice) +COMPAT_SYS_SPU(openat) +SYSCALL_SPU(mkdirat) +SYSCALL_SPU(mknodat) +SYSCALL_SPU(fchownat) +COMPAT_SYS_SPU(futimesat) +SYSX_SPU(sys_newfstatat, sys_fstatat64, sys_fstatat64) +SYSCALL_SPU(unlinkat) +SYSCALL_SPU(renameat) +SYSCALL_SPU(linkat) +SYSCALL_SPU(symlinkat) +SYSCALL_SPU(readlinkat) +SYSCALL_SPU(fchmodat) +SYSCALL_SPU(faccessat) +COMPAT_SYS_SPU(get_robust_list) +COMPAT_SYS_SPU(set_robust_list) +COMPAT_SYS_SPU(move_pages) +SYSCALL_SPU(getcpu) +COMPAT_SYS(epoll_pwait) +COMPAT_SYS_SPU(utimensat) +COMPAT_SYS_SPU(signalfd) +SYSCALL_SPU(timerfd_create) +SYSCALL_SPU(eventfd) +COMPAT_SYS_SPU(sync_file_range2) +COMPAT_SYS(fallocate) +SYSCALL(subpage_prot) +COMPAT_SYS_SPU(timerfd_settime) +COMPAT_SYS_SPU(timerfd_gettime) +COMPAT_SYS_SPU(signalfd4) +SYSCALL_SPU(eventfd2) +SYSCALL_SPU(epoll_create1) +SYSCALL_SPU(dup3) +SYSCALL_SPU(pipe2) +SYSCALL(inotify_init1) diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h new file mode 100644 index 000000000000..d6648c143322 --- /dev/null +++ b/arch/powerpc/include/asm/system.h @@ -0,0 +1,548 @@ +/* + * Copyright (C) 1999 Cort Dougan + */ +#ifndef _ASM_POWERPC_SYSTEM_H +#define _ASM_POWERPC_SYSTEM_H + +#include +#include + +#include + +/* + * Memory barrier. + * The sync instruction guarantees that all memory accesses initiated + * by this processor have been performed (with respect to all other + * mechanisms that access memory). The eieio instruction is a barrier + * providing an ordering (separately) for (a) cacheable stores and (b) + * loads and stores to non-cacheable memory (e.g. I/O devices). + * + * mb() prevents loads and stores being reordered across this point. + * rmb() prevents loads being reordered across this point. + * wmb() prevents stores being reordered across this point. + * read_barrier_depends() prevents data-dependent loads being reordered + * across this point (nop on PPC). + * + * We have to use the sync instructions for mb(), since lwsync doesn't + * order loads with respect to previous stores. Lwsync is fine for + * rmb(), though. Note that rmb() actually uses a sync on 32-bit + * architectures. + * + * For wmb(), we use sync since wmb is used in drivers to order + * stores to system memory with respect to writes to the device. + * However, smp_wmb() can be a lighter-weight lwsync or eieio barrier + * on SMP since it is only used to order updates to system memory. + */ +#define mb() __asm__ __volatile__ ("sync" : : : "memory") +#define rmb() __asm__ __volatile__ ("sync" : : : "memory") +#define wmb() __asm__ __volatile__ ("sync" : : : "memory") +#define read_barrier_depends() do { } while(0) + +#define set_mb(var, value) do { var = value; mb(); } while (0) + +#ifdef __KERNEL__ +#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */ +#ifdef CONFIG_SMP + +#ifdef __SUBARCH_HAS_LWSYNC +# define SMPWMB lwsync +#else +# define SMPWMB eieio +#endif + +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() __asm__ __volatile__ (__stringify(SMPWMB) : : :"memory") +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while(0) +#endif /* CONFIG_SMP */ + +/* + * This is a barrier which prevents following instructions from being + * started until the value of the argument x is known. For example, if + * x is a variable loaded from memory, this prevents following + * instructions from being executed until the load has been performed. + */ +#define data_barrier(x) \ + asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory"); + +struct task_struct; +struct pt_regs; + +#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) + +extern int (*__debugger)(struct pt_regs *regs); +extern int (*__debugger_ipi)(struct pt_regs *regs); +extern int (*__debugger_bpt)(struct pt_regs *regs); +extern int (*__debugger_sstep)(struct pt_regs *regs); +extern int (*__debugger_iabr_match)(struct pt_regs *regs); +extern int (*__debugger_dabr_match)(struct pt_regs *regs); +extern int (*__debugger_fault_handler)(struct pt_regs *regs); + +#define DEBUGGER_BOILERPLATE(__NAME) \ +static inline int __NAME(struct pt_regs *regs) \ +{ \ + if (unlikely(__ ## __NAME)) \ + return __ ## __NAME(regs); \ + return 0; \ +} + +DEBUGGER_BOILERPLATE(debugger) +DEBUGGER_BOILERPLATE(debugger_ipi) +DEBUGGER_BOILERPLATE(debugger_bpt) +DEBUGGER_BOILERPLATE(debugger_sstep) +DEBUGGER_BOILERPLATE(debugger_iabr_match) +DEBUGGER_BOILERPLATE(debugger_dabr_match) +DEBUGGER_BOILERPLATE(debugger_fault_handler) + +#else +static inline int debugger(struct pt_regs *regs) { return 0; } +static inline int debugger_ipi(struct pt_regs *regs) { return 0; } +static inline int debugger_bpt(struct pt_regs *regs) { return 0; } +static inline int debugger_sstep(struct pt_regs *regs) { return 0; } +static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; } +static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; } +static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; } +#endif + +extern int set_dabr(unsigned long dabr); +extern void do_dabr(struct pt_regs *regs, unsigned long address, + unsigned long error_code); +extern void print_backtrace(unsigned long *); +extern void show_regs(struct pt_regs * regs); +extern void flush_instruction_cache(void); +extern void hard_reset_now(void); +extern void poweroff_now(void); + +#ifdef CONFIG_6xx +extern long _get_L2CR(void); +extern long _get_L3CR(void); +extern void _set_L2CR(unsigned long); +extern void _set_L3CR(unsigned long); +#else +#define _get_L2CR() 0L +#define _get_L3CR() 0L +#define _set_L2CR(val) do { } while(0) +#define _set_L3CR(val) do { } while(0) +#endif + +extern void via_cuda_init(void); +extern void read_rtc_time(void); +extern void pmac_find_display(void); +extern void giveup_fpu(struct task_struct *); +extern void disable_kernel_fp(void); +extern void enable_kernel_fp(void); +extern void flush_fp_to_thread(struct task_struct *); +extern void enable_kernel_altivec(void); +extern void giveup_altivec(struct task_struct *); +extern void load_up_altivec(struct task_struct *); +extern int emulate_altivec(struct pt_regs *); +extern void __giveup_vsx(struct task_struct *); +extern void giveup_vsx(struct task_struct *); +extern void enable_kernel_spe(void); +extern void giveup_spe(struct task_struct *); +extern void load_up_spe(struct task_struct *); +extern int fix_alignment(struct pt_regs *); +extern void cvt_fd(float *from, double *to, struct thread_struct *thread); +extern void cvt_df(double *from, float *to, struct thread_struct *thread); + +#ifndef CONFIG_SMP +extern void discard_lazy_cpu_state(void); +#else +static inline void discard_lazy_cpu_state(void) +{ +} +#endif + +#ifdef CONFIG_ALTIVEC +extern void flush_altivec_to_thread(struct task_struct *); +#else +static inline void flush_altivec_to_thread(struct task_struct *t) +{ +} +#endif + +#ifdef CONFIG_VSX +extern void flush_vsx_to_thread(struct task_struct *); +#else +static inline void flush_vsx_to_thread(struct task_struct *t) +{ +} +#endif + +#ifdef CONFIG_SPE +extern void flush_spe_to_thread(struct task_struct *); +#else +static inline void flush_spe_to_thread(struct task_struct *t) +{ +} +#endif + +extern int call_rtas(const char *, int, int, unsigned long *, ...); +extern void cacheable_memzero(void *p, unsigned int nb); +extern void *cacheable_memcpy(void *, const void *, unsigned int); +extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long); +extern void bad_page_fault(struct pt_regs *, unsigned long, int); +extern int die(const char *, struct pt_regs *, long); +extern void _exception(int, struct pt_regs *, int, unsigned long); +extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); + +#ifdef CONFIG_BOOKE_WDT +extern u32 booke_wdt_enabled; +extern u32 booke_wdt_period; +#endif /* CONFIG_BOOKE_WDT */ + +struct device_node; +extern void note_scsi_host(struct device_node *, void *); + +extern struct task_struct *__switch_to(struct task_struct *, + struct task_struct *); +#define switch_to(prev, next, last) ((last) = __switch_to((prev), (next))) + +struct thread_struct; +extern struct task_struct *_switch(struct thread_struct *prev, + struct thread_struct *next); + +extern unsigned int rtas_data; +extern int mem_init_done; /* set on boot once kmalloc can be called */ +extern int init_bootmem_done; /* set on !NUMA once bootmem is available */ +extern unsigned long memory_limit; +extern unsigned long klimit; + +extern void *alloc_maybe_bootmem(size_t size, gfp_t mask); +extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask); + +extern int powersave_nap; /* set if nap mode can be used in idle loop */ + +/* + * Atomic exchange + * + * Changes the memory location '*ptr' to be val and returns + * the previous value stored there. + */ +static __always_inline unsigned long +__xchg_u32(volatile void *p, unsigned long val) +{ + unsigned long prev; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: lwarx %0,0,%2 \n" + PPC405_ERR77(0,%2) +" stwcx. %3,0,%2 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (prev), "+m" (*(volatile unsigned int *)p) + : "r" (p), "r" (val) + : "cc", "memory"); + + return prev; +} + +/* + * Atomic exchange + * + * Changes the memory location '*ptr' to be val and returns + * the previous value stored there. + */ +static __always_inline unsigned long +__xchg_u32_local(volatile void *p, unsigned long val) +{ + unsigned long prev; + + __asm__ __volatile__( +"1: lwarx %0,0,%2 \n" + PPC405_ERR77(0,%2) +" stwcx. %3,0,%2 \n\ + bne- 1b" + : "=&r" (prev), "+m" (*(volatile unsigned int *)p) + : "r" (p), "r" (val) + : "cc", "memory"); + + return prev; +} + +#ifdef CONFIG_PPC64 +static __always_inline unsigned long +__xchg_u64(volatile void *p, unsigned long val) +{ + unsigned long prev; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: ldarx %0,0,%2 \n" + PPC405_ERR77(0,%2) +" stdcx. %3,0,%2 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (prev), "+m" (*(volatile unsigned long *)p) + : "r" (p), "r" (val) + : "cc", "memory"); + + return prev; +} + +static __always_inline unsigned long +__xchg_u64_local(volatile void *p, unsigned long val) +{ + unsigned long prev; + + __asm__ __volatile__( +"1: ldarx %0,0,%2 \n" + PPC405_ERR77(0,%2) +" stdcx. %3,0,%2 \n\ + bne- 1b" + : "=&r" (prev), "+m" (*(volatile unsigned long *)p) + : "r" (p), "r" (val) + : "cc", "memory"); + + return prev; +} +#endif + +/* + * This function doesn't exist, so you'll get a linker error + * if something tries to do an invalid xchg(). + */ +extern void __xchg_called_with_bad_pointer(void); + +static __always_inline unsigned long +__xchg(volatile void *ptr, unsigned long x, unsigned int size) +{ + switch (size) { + case 4: + return __xchg_u32(ptr, x); +#ifdef CONFIG_PPC64 + case 8: + return __xchg_u64(ptr, x); +#endif + } + __xchg_called_with_bad_pointer(); + return x; +} + +static __always_inline unsigned long +__xchg_local(volatile void *ptr, unsigned long x, unsigned int size) +{ + switch (size) { + case 4: + return __xchg_u32_local(ptr, x); +#ifdef CONFIG_PPC64 + case 8: + return __xchg_u64_local(ptr, x); +#endif + } + __xchg_called_with_bad_pointer(); + return x; +} +#define xchg(ptr,x) \ + ({ \ + __typeof__(*(ptr)) _x_ = (x); \ + (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \ + }) + +#define xchg_local(ptr,x) \ + ({ \ + __typeof__(*(ptr)) _x_ = (x); \ + (__typeof__(*(ptr))) __xchg_local((ptr), \ + (unsigned long)_x_, sizeof(*(ptr))); \ + }) + +/* + * Compare and exchange - if *p == old, set it to new, + * and return the old value of *p. + */ +#define __HAVE_ARCH_CMPXCHG 1 + +static __always_inline unsigned long +__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new) +{ + unsigned int prev; + + __asm__ __volatile__ ( + LWSYNC_ON_SMP +"1: lwarx %0,0,%2 # __cmpxchg_u32\n\ + cmpw 0,%0,%3\n\ + bne- 2f\n" + PPC405_ERR77(0,%2) +" stwcx. %4,0,%2\n\ + bne- 1b" + ISYNC_ON_SMP + "\n\ +2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} + +static __always_inline unsigned long +__cmpxchg_u32_local(volatile unsigned int *p, unsigned long old, + unsigned long new) +{ + unsigned int prev; + + __asm__ __volatile__ ( +"1: lwarx %0,0,%2 # __cmpxchg_u32\n\ + cmpw 0,%0,%3\n\ + bne- 2f\n" + PPC405_ERR77(0,%2) +" stwcx. %4,0,%2\n\ + bne- 1b" + "\n\ +2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} + +#ifdef CONFIG_PPC64 +static __always_inline unsigned long +__cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new) +{ + unsigned long prev; + + __asm__ __volatile__ ( + LWSYNC_ON_SMP +"1: ldarx %0,0,%2 # __cmpxchg_u64\n\ + cmpd 0,%0,%3\n\ + bne- 2f\n\ + stdcx. %4,0,%2\n\ + bne- 1b" + ISYNC_ON_SMP + "\n\ +2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} + +static __always_inline unsigned long +__cmpxchg_u64_local(volatile unsigned long *p, unsigned long old, + unsigned long new) +{ + unsigned long prev; + + __asm__ __volatile__ ( +"1: ldarx %0,0,%2 # __cmpxchg_u64\n\ + cmpd 0,%0,%3\n\ + bne- 2f\n\ + stdcx. %4,0,%2\n\ + bne- 1b" + "\n\ +2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} +#endif + +/* This function doesn't exist, so you'll get a linker error + if something tries to do an invalid cmpxchg(). */ +extern void __cmpxchg_called_with_bad_pointer(void); + +static __always_inline unsigned long +__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, + unsigned int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32(ptr, old, new); +#ifdef CONFIG_PPC64 + case 8: + return __cmpxchg_u64(ptr, old, new); +#endif + } + __cmpxchg_called_with_bad_pointer(); + return old; +} + +static __always_inline unsigned long +__cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new, + unsigned int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32_local(ptr, old, new); +#ifdef CONFIG_PPC64 + case 8: + return __cmpxchg_u64_local(ptr, old, new); +#endif + } + __cmpxchg_called_with_bad_pointer(); + return old; +} + +#define cmpxchg(ptr, o, n) \ + ({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ + }) + + +#define cmpxchg_local(ptr, o, n) \ + ({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ + }) + +#ifdef CONFIG_PPC64 +/* + * We handle most unaligned accesses in hardware. On the other hand + * unaligned DMA can be very expensive on some ppc64 IO chips (it does + * powers of 2 writes until it reaches sufficient alignment). + * + * Based on this we disable the IP header alignment in network drivers. + * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining + * cacheline alignment of buffers. + */ +#define NET_IP_ALIGN 0 +#define NET_SKB_PAD L1_CACHE_BYTES + +#define cmpxchg64(ptr, o, n) \ + ({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg((ptr), (o), (n)); \ + }) +#define cmpxchg64_local(ptr, o, n) \ + ({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg_local((ptr), (o), (n)); \ + }) +#else +#include +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) +#endif + +#define arch_align_stack(x) (x) + +/* Used in very early kernel initialization. */ +extern unsigned long reloc_offset(void); +extern unsigned long add_reloc_offset(unsigned long); +extern void reloc_got2(unsigned long); + +#define PTRRELOC(x) ((typeof(x)) add_reloc_offset((unsigned long)(x))) + +#ifdef CONFIG_VIRT_CPU_ACCOUNTING +extern void account_system_vtime(struct task_struct *); +#endif + +extern struct dentry *powerpc_debugfs_root; + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SYSTEM_H */ diff --git a/arch/powerpc/include/asm/tce.h b/arch/powerpc/include/asm/tce.h new file mode 100644 index 000000000000..f663634cccc9 --- /dev/null +++ b/arch/powerpc/include/asm/tce.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation + * Rewrite, cleanup: + * Copyright (C) 2004 Olof Johansson , IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_TCE_H +#define _ASM_POWERPC_TCE_H +#ifdef __KERNEL__ + +#include + +/* + * Tces come in two formats, one for the virtual bus and a different + * format for PCI + */ +#define TCE_VB 0 +#define TCE_PCI 1 + +/* TCE page size is 4096 bytes (1 << 12) */ + +#define TCE_SHIFT 12 +#define TCE_PAGE_SIZE (1 << TCE_SHIFT) + +#define TCE_ENTRY_SIZE 8 /* each TCE is 64 bits */ + +#define TCE_RPN_MASK 0xfffffffffful /* 40-bit RPN (4K pages) */ +#define TCE_RPN_SHIFT 12 +#define TCE_VALID 0x800 /* TCE valid */ +#define TCE_ALLIO 0x400 /* TCE valid for all lpars */ +#define TCE_PCI_WRITE 0x2 /* write from PCI allowed */ +#define TCE_PCI_READ 0x1 /* read from PCI allowed */ +#define TCE_VB_WRITE 0x1 /* write from VB allowed */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_TCE_H */ diff --git a/arch/powerpc/include/asm/termbits.h b/arch/powerpc/include/asm/termbits.h new file mode 100644 index 000000000000..6698188ca550 --- /dev/null +++ b/arch/powerpc/include/asm/termbits.h @@ -0,0 +1,209 @@ +#ifndef _ASM_POWERPC_TERMBITS_H +#define _ASM_POWERPC_TERMBITS_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +/* + * termios type and macro definitions. Be careful about adding stuff + * to this file since it's used in GNU libc and there are strict rules + * concerning namespace pollution. + */ + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_cc[NCCS]; /* control characters */ + cc_t c_line; /* line discipline (== c_cc[19]) */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* For PowerPC the termios and ktermios are the same */ + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_cc[NCCS]; /* control characters */ + cc_t c_line; /* line discipline (== c_cc[19]) */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VMIN 5 +#define VEOL 6 +#define VTIME 7 +#define VEOL2 8 +#define VSWTC 9 +#define VWERASE 10 +#define VREPRINT 11 +#define VSUSP 12 +#define VSTART 13 +#define VSTOP 14 +#define VLNEXT 15 +#define VDISCARD 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IXON 0001000 +#define IXOFF 0002000 +#define IXANY 0004000 +#define IUCLC 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define ONLCR 0000002 +#define OLCUC 0000004 + +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 + +#define OFILL 00000100 +#define OFDEL 00000200 +#define NLDLY 00001400 +#define NL0 00000000 +#define NL1 00000400 +#define NL2 00001000 +#define NL3 00001400 +#define TABDLY 00006000 +#define TAB0 00000000 +#define TAB1 00002000 +#define TAB2 00004000 +#define TAB3 00006000 +#define XTABS 00006000 /* required by POSIX to == TAB3 */ +#define CRDLY 00030000 +#define CR0 00000000 +#define CR1 00010000 +#define CR2 00020000 +#define CR3 00030000 +#define FFDLY 00040000 +#define FF0 00000000 +#define FF1 00040000 +#define BSDLY 00100000 +#define BS0 00000000 +#define BS1 00100000 +#define VTDLY 00200000 +#define VT0 00000000 +#define VT1 00200000 + +/* c_cflag bit meaning */ +#define CBAUD 0000377 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CBAUDEX 0000000 +#define B57600 00020 +#define B115200 00021 +#define B230400 00022 +#define B460800 00023 +#define B500000 00024 +#define B576000 00025 +#define B921600 00026 +#define B1000000 00027 +#define B1152000 00030 +#define B1500000 00031 +#define B2000000 00032 +#define B2500000 00033 +#define B3000000 00034 +#define B3500000 00035 +#define B4000000 00036 +#define BOTHER 00037 + +#define CIBAUD 077600000 +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +#define CSIZE 00001400 +#define CS5 00000000 +#define CS6 00000400 +#define CS7 00001000 +#define CS8 00001400 + +#define CSTOPB 00002000 +#define CREAD 00004000 +#define PARENB 00010000 +#define PARODD 00020000 +#define HUPCL 00040000 + +#define CLOCAL 00100000 +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +/* c_lflag bits */ +#define ISIG 0x00000080 +#define ICANON 0x00000100 +#define XCASE 0x00004000 +#define ECHO 0x00000008 +#define ECHOE 0x00000002 +#define ECHOK 0x00000004 +#define ECHONL 0x00000010 +#define NOFLSH 0x80000000 +#define TOSTOP 0x00400000 +#define ECHOCTL 0x00000040 +#define ECHOPRT 0x00000020 +#define ECHOKE 0x00000001 +#define FLUSHO 0x00800000 +#define PENDIN 0x20000000 +#define IEXTEN 0x00000400 + +/* Values for the ACTION argument to `tcflow'. */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* Values for the QUEUE_SELECTOR argument to `tcflush'. */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'. */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* _ASM_POWERPC_TERMBITS_H */ diff --git a/arch/powerpc/include/asm/termios.h b/arch/powerpc/include/asm/termios.h new file mode 100644 index 000000000000..2c14fea07c8a --- /dev/null +++ b/arch/powerpc/include/asm/termios.h @@ -0,0 +1,85 @@ +#ifndef _ASM_POWERPC_TERMIOS_H +#define _ASM_POWERPC_TERMIOS_H + +/* + * Liberally adapted from alpha/termios.h. In particular, the c_cc[] + * fields have been reordered so that termio & termios share the + * common subset in the same order (for brain dead programs that don't + * know or care about the differences). + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include + +struct sgttyb { + char sg_ispeed; + char sg_ospeed; + char sg_erase; + char sg_kill; + short sg_flags; +}; + +struct tchars { + char t_intrc; + char t_quitc; + char t_startc; + char t_stopc; + char t_eofc; + char t_brkc; +}; + +struct ltchars { + char t_suspc; + char t_dsuspc; + char t_rprntc; + char t_flushc; + char t_werasc; + char t_lnextc; +}; + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 10 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* c_cc characters */ +#define _VINTR 0 +#define _VQUIT 1 +#define _VERASE 2 +#define _VKILL 3 +#define _VEOF 4 +#define _VMIN 5 +#define _VEOL 6 +#define _VTIME 7 +#define _VEOL2 8 +#define _VSWTC 9 + +#ifdef __KERNEL__ +/* ^C ^\ del ^U ^D 1 0 0 0 0 ^W ^R ^Z ^Q ^S ^V ^U */ +#define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025" +#endif + +#ifdef __KERNEL__ + +#include + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_TERMIOS_H */ diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h new file mode 100644 index 000000000000..9665a26a253a --- /dev/null +++ b/arch/powerpc/include/asm/thread_info.h @@ -0,0 +1,161 @@ +/* thread_info.h: PowerPC low-level thread information + * adapted from the i386 version by Paul Mackerras + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ + +#ifndef _ASM_POWERPC_THREAD_INFO_H +#define _ASM_POWERPC_THREAD_INFO_H + +#ifdef __KERNEL__ + +/* We have 8k stacks on ppc32 and 16k on ppc64 */ + +#ifdef CONFIG_PPC64 +#define THREAD_SHIFT 14 +#else +#define THREAD_SHIFT 13 +#endif + +#define THREAD_SIZE (1 << THREAD_SHIFT) + +#ifndef __ASSEMBLY__ +#include +#include +#include +#include + +/* + * low level task data. + */ +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + int cpu; /* cpu we're on */ + int preempt_count; /* 0 => preemptable, + <0 => BUG */ + struct restart_block restart_block; + unsigned long local_flags; /* private flags for thread */ + + /* low level flags - has atomic operations done on it */ + unsigned long flags ____cacheline_aligned_in_smp; +}; + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .cpu = 0, \ + .preempt_count = 1, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ + .flags = 0, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* thread information allocation */ + +#if THREAD_SHIFT >= PAGE_SHIFT + +#define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT) + +#else /* THREAD_SHIFT < PAGE_SHIFT */ + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +extern struct thread_info *alloc_thread_info(struct task_struct *tsk); +extern void free_thread_info(struct thread_info *ti); + +#endif /* THREAD_SHIFT < PAGE_SHIFT */ + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + register unsigned long sp asm("r1"); + + /* gcc4, at least, is smart enough to turn this into a single + * rlwinm for ppc32 and clrrdi for ppc64 */ + return (struct thread_info *)(sp & ~(THREAD_SIZE-1)); +} + +#endif /* __ASSEMBLY__ */ + +#define PREEMPT_ACTIVE 0x10000000 + +/* + * thread information flag bit numbers + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling + TIF_NEED_RESCHED */ +#define TIF_32BIT 4 /* 32 bit binary */ +#define TIF_PERFMON_WORK 5 /* work for pfm_handle_work() */ +#define TIF_PERFMON_CTXSW 6 /* perfmon needs ctxsw calls */ +#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ +#define TIF_SINGLESTEP 8 /* singlestepping active */ +#define TIF_MEMDIE 9 +#define TIF_SECCOMP 10 /* secure computing */ +#define TIF_RESTOREALL 11 /* Restore all regs (implies NOERROR) */ +#define TIF_NOERROR 12 /* Force successful syscall return */ +#define TIF_NOTIFY_RESUME 13 /* callback before returning to user */ +#define TIF_FREEZE 14 /* Freezing for suspend */ +#define TIF_RUNLATCH 15 /* Is the runlatch enabled? */ +#define TIF_ABI_PENDING 16 /* 32/64 bit switch needed */ + +/* as above, but as bit values */ +#define _TIF_SYSCALL_TRACE (1<local_flags |= _TLF_RESTORE_SIGMASK; + set_bit(TIF_SIGPENDING, &ti->flags); +} +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_THREAD_INFO_H */ diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h new file mode 100644 index 000000000000..febd581ec9b0 --- /dev/null +++ b/arch/powerpc/include/asm/time.h @@ -0,0 +1,255 @@ +/* + * Common time prototypes and such for all ppc machines. + * + * Written by Cort Dougan (cort@cs.nmt.edu) to merge + * Paul Mackerras' version and mine for PReP and Pmac. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __POWERPC_TIME_H +#define __POWERPC_TIME_H + +#ifdef __KERNEL__ +#include +#include + +#include +#ifdef CONFIG_PPC_ISERIES +#include +#include +#include +#endif + +/* time.c */ +extern unsigned long tb_ticks_per_jiffy; +extern unsigned long tb_ticks_per_usec; +extern unsigned long tb_ticks_per_sec; +extern u64 tb_to_xs; +extern unsigned tb_to_us; + +struct rtc_time; +extern void to_tm(int tim, struct rtc_time * tm); +extern void GregorianDay(struct rtc_time *tm); +extern time_t last_rtc_update; + +extern void generic_calibrate_decr(void); +extern void wakeup_decrementer(void); +extern void snapshot_timebase(void); + +extern void set_dec_cpu6(unsigned int val); + +/* Some sane defaults: 125 MHz timebase, 1GHz processor */ +extern unsigned long ppc_proc_freq; +#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) +extern unsigned long ppc_tb_freq; +#define DEFAULT_TB_FREQ 125000000UL + +/* + * By putting all of this stuff into a single struct we + * reduce the number of cache lines touched by do_gettimeofday. + * Both by collecting all of the data in one cache line and + * by touching only one TOC entry on ppc64. + */ +struct gettimeofday_vars { + u64 tb_to_xs; + u64 stamp_xsec; + u64 tb_orig_stamp; +}; + +struct gettimeofday_struct { + unsigned long tb_ticks_per_sec; + struct gettimeofday_vars vars[2]; + struct gettimeofday_vars * volatile varp; + unsigned var_idx; + unsigned tb_to_us; +}; + +struct div_result { + u64 result_high; + u64 result_low; +}; + +/* Accessor functions for the timebase (RTC on 601) registers. */ +/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */ +#ifdef CONFIG_6xx +#define __USE_RTC() (!cpu_has_feature(CPU_FTR_USE_TB)) +#else +#define __USE_RTC() 0 +#endif + +#ifdef CONFIG_PPC64 + +/* For compatibility, get_tbl() is defined as get_tb() on ppc64 */ +#define get_tbl get_tb + +#else + +static inline unsigned long get_tbl(void) +{ +#if defined(CONFIG_403GCX) + unsigned long tbl; + asm volatile("mfspr %0, 0x3dd" : "=r" (tbl)); + return tbl; +#else + return mftbl(); +#endif +} + +static inline unsigned int get_tbu(void) +{ +#ifdef CONFIG_403GCX + unsigned int tbu; + asm volatile("mfspr %0, 0x3dc" : "=r" (tbu)); + return tbu; +#else + return mftbu(); +#endif +} +#endif /* !CONFIG_PPC64 */ + +static inline unsigned int get_rtcl(void) +{ + unsigned int rtcl; + + asm volatile("mfrtcl %0" : "=r" (rtcl)); + return rtcl; +} + +static inline u64 get_rtc(void) +{ + unsigned int hi, lo, hi2; + + do { + asm volatile("mfrtcu %0; mfrtcl %1; mfrtcu %2" + : "=r" (hi), "=r" (lo), "=r" (hi2)); + } while (hi2 != hi); + return (u64)hi * 1000000000 + lo; +} + +#ifdef CONFIG_PPC64 +static inline u64 get_tb(void) +{ + return mftb(); +} +#else /* CONFIG_PPC64 */ +static inline u64 get_tb(void) +{ + unsigned int tbhi, tblo, tbhi2; + + do { + tbhi = get_tbu(); + tblo = get_tbl(); + tbhi2 = get_tbu(); + } while (tbhi != tbhi2); + + return ((u64)tbhi << 32) | tblo; +} +#endif /* !CONFIG_PPC64 */ + +static inline u64 get_tb_or_rtc(void) +{ + return __USE_RTC() ? get_rtc() : get_tb(); +} + +static inline void set_tb(unsigned int upper, unsigned int lower) +{ + mtspr(SPRN_TBWL, 0); + mtspr(SPRN_TBWU, upper); + mtspr(SPRN_TBWL, lower); +} + +/* Accessor functions for the decrementer register. + * The 4xx doesn't even have a decrementer. I tried to use the + * generic timer interrupt code, which seems OK, with the 4xx PIT + * in auto-reload mode. The problem is PIT stops counting when it + * hits zero. If it would wrap, we could use it just like a decrementer. + */ +static inline unsigned int get_dec(void) +{ +#if defined(CONFIG_40x) + return (mfspr(SPRN_PIT)); +#else + return (mfspr(SPRN_DEC)); +#endif +} + +/* + * Note: Book E and 4xx processors differ from other PowerPC processors + * in when the decrementer generates its interrupt: on the 1 to 0 + * transition for Book E/4xx, but on the 0 to -1 transition for others. + */ +static inline void set_dec(int val) +{ +#if defined(CONFIG_40x) + mtspr(SPRN_PIT, val); +#elif defined(CONFIG_8xx_CPU6) + set_dec_cpu6(val - 1); +#else +#ifndef CONFIG_BOOKE + --val; +#endif +#ifdef CONFIG_PPC_ISERIES + if (firmware_has_feature(FW_FEATURE_ISERIES) && + get_lppaca()->shared_proc) { + get_lppaca()->virtual_decr = val; + if (get_dec() > val) + HvCall_setVirtualDecr(); + return; + } +#endif + mtspr(SPRN_DEC, val); +#endif /* not 40x or 8xx_CPU6 */ +} + +static inline unsigned long tb_ticks_since(unsigned long tstamp) +{ + if (__USE_RTC()) { + int delta = get_rtcl() - (unsigned int) tstamp; + return delta < 0 ? delta + 1000000000 : delta; + } + return get_tbl() - tstamp; +} + +#define mulhwu(x,y) \ +({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) + +#ifdef CONFIG_PPC64 +#define mulhdu(x,y) \ +({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) +#else +extern u64 mulhdu(u64, u64); +#endif + +extern void smp_space_timers(unsigned int); + +extern unsigned mulhwu_scale_factor(unsigned, unsigned); +extern void div128_by_32(u64 dividend_high, u64 dividend_low, + unsigned divisor, struct div_result *dr); + +/* Used to store Processor Utilization register (purr) values */ + +struct cpu_usage { + u64 current_tb; /* Holds the current purr register values */ +}; + +DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array); + +#if defined(CONFIG_VIRT_CPU_ACCOUNTING) +extern void calculate_steal_time(void); +extern void snapshot_timebases(void); +#define account_process_vtime(tsk) account_process_tick(tsk, 0) +#else +#define calculate_steal_time() do { } while (0) +#define snapshot_timebases() do { } while (0) +#define account_process_vtime(tsk) do { } while (0) +#endif + +extern void secondary_cpu_time_init(void); +extern void iSeries_time_init_early(void); + +#endif /* __KERNEL__ */ +#endif /* __POWERPC_TIME_H */ diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h new file mode 100644 index 000000000000..c55e14f7ef44 --- /dev/null +++ b/arch/powerpc/include/asm/timex.h @@ -0,0 +1,50 @@ +#ifndef _ASM_POWERPC_TIMEX_H +#define _ASM_POWERPC_TIMEX_H + +#ifdef __KERNEL__ + +/* + * PowerPC architecture timex specifications + */ + +#include +#include + +#define CLOCK_TICK_RATE 1024000 /* Underlying HZ */ + +typedef unsigned long cycles_t; + +static inline cycles_t get_cycles(void) +{ +#ifdef __powerpc64__ + return mftb(); +#else + cycles_t ret; + + /* + * For the "cycle" counter we use the timebase lower half. + * Currently only used on SMP. + */ + + ret = 0; + + __asm__ __volatile__( + "97: mftb %0\n" + "99:\n" + ".section __ftr_fixup,\"a\"\n" + ".align 2\n" + "98:\n" + " .long %1\n" + " .long 0\n" + " .long 97b-98b\n" + " .long 99b-98b\n" + " .long 0\n" + " .long 0\n" + ".previous" + : "=r" (ret) : "i" (CPU_FTR_601)); + return ret; +#endif +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_TIMEX_H */ diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h new file mode 100644 index 000000000000..e20ff7541f36 --- /dev/null +++ b/arch/powerpc/include/asm/tlb.h @@ -0,0 +1,81 @@ +/* + * TLB shootdown specifics for powerpc + * + * Copyright (C) 2002 Anton Blanchard, IBM Corp. + * Copyright (C) 2002 Paul Mackerras, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_POWERPC_TLB_H +#define _ASM_POWERPC_TLB_H +#ifdef __KERNEL__ + +#ifndef __powerpc64__ +#include +#endif +#include +#include +#ifndef __powerpc64__ +#include +#include +#endif + +#include + +struct mmu_gather; + +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) + +#if !defined(CONFIG_PPC_STD_MMU) + +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#elif defined(__powerpc64__) + +extern void pte_free_finish(void); + +static inline void tlb_flush(struct mmu_gather *tlb) +{ + struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch); + + /* If there's a TLB batch pending, then we must flush it because the + * pages are going to be freed and we really don't want to have a CPU + * access a freed page because it has a stale TLB + */ + if (tlbbatch->index) + __flush_tlb_pending(tlbbatch); + + pte_free_finish(); +} + +#else + +extern void tlb_flush(struct mmu_gather *tlb); + +#endif + +/* Get the generic bits... */ +#include + +#if !defined(CONFIG_PPC_STD_MMU) || defined(__powerpc64__) + +#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) + +#else +extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, + unsigned long address); + +static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, + unsigned long address) +{ + if (pte_val(*ptep) & _PAGE_HASHPTE) + flush_hash_entry(tlb->mm, ptep, address); +} + +#endif +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_TLB_H */ diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h new file mode 100644 index 000000000000..361cd5c7a32b --- /dev/null +++ b/arch/powerpc/include/asm/tlbflush.h @@ -0,0 +1,166 @@ +#ifndef _ASM_POWERPC_TLBFLUSH_H +#define _ASM_POWERPC_TLBFLUSH_H + +/* + * TLB flushing: + * + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifdef __KERNEL__ + +#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE) +/* + * TLB flushing for software loaded TLB chips + * + * TODO: (CONFIG_FSL_BOOKE) determine if flush_tlb_range & + * flush_tlb_kernel_range are best implemented as tlbia vs + * specific tlbie's + */ + +#include + +extern void _tlbie(unsigned long address, unsigned int pid); + +#if defined(CONFIG_40x) || defined(CONFIG_8xx) +#define _tlbia() asm volatile ("tlbia; sync" : : : "memory") +#else /* CONFIG_44x || CONFIG_FSL_BOOKE */ +extern void _tlbia(void); +#endif + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + _tlbia(); +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ + _tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0); +} + +static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, + unsigned long vmaddr) +{ + _tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0); +} + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + _tlbia(); +} + +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ + _tlbia(); +} + +#elif defined(CONFIG_PPC32) +/* + * TLB flushing for "classic" hash-MMMU 32-bit CPUs, 6xx, 7xx, 7xxx + */ +extern void _tlbie(unsigned long address); +extern void _tlbia(void); + +extern void flush_tlb_mm(struct mm_struct *mm); +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); +extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr); +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); + +#else +/* + * TLB flushing for 64-bit has-MMU CPUs + */ + +#include +#include + +#define PPC64_TLB_BATCH_NR 192 + +struct ppc64_tlb_batch { + int active; + unsigned long index; + struct mm_struct *mm; + real_pte_t pte[PPC64_TLB_BATCH_NR]; + unsigned long vaddr[PPC64_TLB_BATCH_NR]; + unsigned int psize; + int ssize; +}; +DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); + +extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch); + +extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, unsigned long pte, int huge); + +#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE + +static inline void arch_enter_lazy_mmu_mode(void) +{ + struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); + + batch->active = 1; +} + +static inline void arch_leave_lazy_mmu_mode(void) +{ + struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); + + if (batch->index) + __flush_tlb_pending(batch); + batch->active = 0; +} + +#define arch_flush_lazy_mmu_mode() do {} while (0) + + +extern void flush_hash_page(unsigned long va, real_pte_t pte, int psize, + int ssize, int local); +extern void flush_hash_range(unsigned long number, int local); + + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ +} + +static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, + unsigned long vmaddr) +{ +} + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ +} + +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ +} + +/* Private function for use by PCI IO mapping code */ +extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start, + unsigned long end); + + +#endif + +#endif /*__KERNEL__ */ +#endif /* _ASM_POWERPC_TLBFLUSH_H */ diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h new file mode 100644 index 000000000000..c32da6f97999 --- /dev/null +++ b/arch/powerpc/include/asm/topology.h @@ -0,0 +1,117 @@ +#ifndef _ASM_POWERPC_TOPOLOGY_H +#define _ASM_POWERPC_TOPOLOGY_H +#ifdef __KERNEL__ + + +struct sys_device; +struct device_node; + +#ifdef CONFIG_NUMA + +#include + +static inline int cpu_to_node(int cpu) +{ + return numa_cpu_lookup_table[cpu]; +} + +#define parent_node(node) (node) + +static inline cpumask_t node_to_cpumask(int node) +{ + return numa_cpumask_lookup_table[node]; +} + +static inline int node_to_first_cpu(int node) +{ + cpumask_t tmp; + tmp = node_to_cpumask(node); + return first_cpu(tmp); +} + +int of_node_to_nid(struct device_node *device); + +struct pci_bus; +#ifdef CONFIG_PCI +extern int pcibus_to_node(struct pci_bus *bus); +#else +static inline int pcibus_to_node(struct pci_bus *bus) +{ + return -1; +} +#endif + +#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ + CPU_MASK_ALL : \ + node_to_cpumask(pcibus_to_node(bus)) \ + ) + +/* sched_domains SD_NODE_INIT for PPC64 machines */ +#define SD_NODE_INIT (struct sched_domain) { \ + .span = CPU_MASK_NONE, \ + .parent = NULL, \ + .child = NULL, \ + .groups = NULL, \ + .min_interval = 8, \ + .max_interval = 32, \ + .busy_factor = 32, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 1, \ + .busy_idx = 3, \ + .idle_idx = 1, \ + .newidle_idx = 2, \ + .wake_idx = 1, \ + .flags = SD_LOAD_BALANCE \ + | SD_BALANCE_EXEC \ + | SD_BALANCE_NEWIDLE \ + | SD_WAKE_IDLE \ + | SD_SERIALIZE \ + | SD_WAKE_BALANCE, \ + .last_balance = jiffies, \ + .balance_interval = 1, \ + .nr_balance_failed = 0, \ +} + +extern void __init dump_numa_cpu_topology(void); + +extern int sysfs_add_device_to_node(struct sys_device *dev, int nid); +extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid); + +#else + +static inline int of_node_to_nid(struct device_node *device) +{ + return 0; +} + +static inline void dump_numa_cpu_topology(void) {} + +static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid) +{ + return 0; +} + +static inline void sysfs_remove_device_from_node(struct sys_device *dev, + int nid) +{ +} + +#endif /* CONFIG_NUMA */ + +#include + +#ifdef CONFIG_SMP +#include +#define smt_capable() (cpu_has_feature(CPU_FTR_SMT)) + +#ifdef CONFIG_PPC64 +#include + +#define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu)) +#define topology_core_siblings(cpu) (per_cpu(cpu_core_map, cpu)) +#define topology_core_id(cpu) (cpu_to_core_id(cpu)) +#endif +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_TOPOLOGY_H */ diff --git a/arch/powerpc/include/asm/tsi108.h b/arch/powerpc/include/asm/tsi108.h new file mode 100644 index 000000000000..f8b60793b7a9 --- /dev/null +++ b/arch/powerpc/include/asm/tsi108.h @@ -0,0 +1,121 @@ +/* + * common routine and memory layout for Tundra TSI108(Grendel) host bridge + * memory controller. + * + * Author: Jacob Pan (jacob.pan@freescale.com) + * Alex Bounine (alexandreb@tundra.com) + * + * Copyright 2004-2006 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __PPC_KERNEL_TSI108_H +#define __PPC_KERNEL_TSI108_H + +#include + +/* Size of entire register space */ +#define TSI108_REG_SIZE (0x10000) + +/* Sizes of register spaces for individual blocks */ +#define TSI108_HLP_SIZE 0x1000 +#define TSI108_PCI_SIZE 0x1000 +#define TSI108_CLK_SIZE 0x1000 +#define TSI108_PB_SIZE 0x1000 +#define TSI108_SD_SIZE 0x1000 +#define TSI108_DMA_SIZE 0x1000 +#define TSI108_ETH_SIZE 0x1000 +#define TSI108_I2C_SIZE 0x400 +#define TSI108_MPIC_SIZE 0x400 +#define TSI108_UART0_SIZE 0x200 +#define TSI108_GPIO_SIZE 0x200 +#define TSI108_UART1_SIZE 0x200 + +/* Offsets within Tsi108(A) CSR space for individual blocks */ +#define TSI108_HLP_OFFSET 0x0000 +#define TSI108_PCI_OFFSET 0x1000 +#define TSI108_CLK_OFFSET 0x2000 +#define TSI108_PB_OFFSET 0x3000 +#define TSI108_SD_OFFSET 0x4000 +#define TSI108_DMA_OFFSET 0x5000 +#define TSI108_ETH_OFFSET 0x6000 +#define TSI108_I2C_OFFSET 0x7000 +#define TSI108_MPIC_OFFSET 0x7400 +#define TSI108_UART0_OFFSET 0x7800 +#define TSI108_GPIO_OFFSET 0x7A00 +#define TSI108_UART1_OFFSET 0x7C00 + +/* Tsi108 registers used by common code components */ +#define TSI108_PCI_CSR (0x004) +#define TSI108_PCI_IRP_CFG_CTL (0x180) +#define TSI108_PCI_IRP_STAT (0x184) +#define TSI108_PCI_IRP_ENABLE (0x188) +#define TSI108_PCI_IRP_INTAD (0x18C) + +#define TSI108_PCI_IRP_STAT_P_INT (0x00400000) +#define TSI108_PCI_IRP_ENABLE_P_INT (0x00400000) + +#define TSI108_CG_PWRUP_STATUS (0x234) + +#define TSI108_PB_ISR (0x00C) +#define TSI108_PB_ERRCS (0x404) +#define TSI108_PB_AERR (0x408) + +#define TSI108_PB_ERRCS_ES (1 << 1) +#define TSI108_PB_ISR_PBS_RD_ERR (1 << 8) + +#define TSI108_PCI_CFG_SIZE (0x01000000) + +/* + * PHY Configuration Options + * + * Specify "bcm54xx" in the compatible property of your device tree phy + * nodes if your board uses the Broadcom PHYs + */ +#define TSI108_PHY_MV88E 0 /* Marvel 88Exxxx PHY */ +#define TSI108_PHY_BCM54XX 1 /* Broardcom BCM54xx PHY */ + +/* Global variables */ + +extern u32 tsi108_pci_cfg_base; +/* Exported functions */ + +extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base); +extern unsigned long tsi108_get_mem_size(void); +extern unsigned long tsi108_get_cpu_clk(void); +extern unsigned long tsi108_get_sdc_clk(void); +extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val); +extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 * val); +extern void tsi108_clear_pci_error(u32 pci_cfg_base); + +extern phys_addr_t get_csrbase(void); + +typedef struct { + u32 regs; /* hw registers base address */ + u32 phyregs; /* phy registers base address */ + u16 phy; /* phy address */ + u16 irq_num; /* irq number */ + u8 mac_addr[6]; /* phy mac address */ + u16 phy_type; /* type of phy on board */ +} hw_info; + +extern u32 get_vir_csrbase(void); +extern u32 tsi108_csr_vir_base; + +static inline u32 tsi108_read_reg(u32 reg_offset) +{ + return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset)); +} + +static inline void tsi108_write_reg(u32 reg_offset, u32 val) +{ + out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val); +} + +#endif /* __PPC_KERNEL_TSI108_H */ diff --git a/arch/powerpc/include/asm/tsi108_irq.h b/arch/powerpc/include/asm/tsi108_irq.h new file mode 100644 index 000000000000..6ed93979fbe4 --- /dev/null +++ b/arch/powerpc/include/asm/tsi108_irq.h @@ -0,0 +1,124 @@ +/* + * (C) Copyright 2005 Tundra Semiconductor Corp. + * Alex Bounine, + +/* Register definitions */ +#define TSI108_PCI_P2O_BAR0 (TSI108_PCI_OFFSET + 0x10) +#define TSI108_PCI_P2O_BAR0_UPPER (TSI108_PCI_OFFSET + 0x14) +#define TSI108_PCI_P2O_BAR2 (TSI108_PCI_OFFSET + 0x18) +#define TSI108_PCI_P2O_BAR2_UPPER (TSI108_PCI_OFFSET + 0x1c) +#define TSI108_PCI_P2O_PAGE_SIZES (TSI108_PCI_OFFSET + 0x4c) +#define TSI108_PCI_PFAB_BAR0 (TSI108_PCI_OFFSET + 0x204) +#define TSI108_PCI_PFAB_BAR0_UPPER (TSI108_PCI_OFFSET + 0x208) +#define TSI108_PCI_PFAB_IO (TSI108_PCI_OFFSET + 0x20c) +#define TSI108_PCI_PFAB_IO_UPPER (TSI108_PCI_OFFSET + 0x210) +#define TSI108_PCI_PFAB_MEM32 (TSI108_PCI_OFFSET + 0x214) +#define TSI108_PCI_PFAB_PFM3 (TSI108_PCI_OFFSET + 0x220) +#define TSI108_PCI_PFAB_PFM4 (TSI108_PCI_OFFSET + 0x230) + +extern int tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary); +extern void tsi108_pci_int_init(struct device_node *node); +extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc); +extern void tsi108_clear_pci_cfg_error(void); + +#endif /* _ASM_POWERPC_TSI108_PCI_H */ diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h new file mode 100644 index 000000000000..d3374bc865ba --- /dev/null +++ b/arch/powerpc/include/asm/types.h @@ -0,0 +1,75 @@ +#ifndef _ASM_POWERPC_TYPES_H +#define _ASM_POWERPC_TYPES_H + +#ifdef __powerpc64__ +# include +#else +# include +#endif + +#ifndef __ASSEMBLY__ + +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __powerpc64__ +typedef unsigned int umode_t; +#else +typedef unsigned short umode_t; +#endif + +typedef struct { + __u32 u[4]; +} __attribute__((aligned(16))) __vector128; + +#endif /* __ASSEMBLY__ */ + +#ifdef __KERNEL__ +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __powerpc64__ +#define BITS_PER_LONG 64 +#else +#define BITS_PER_LONG 32 +#endif + +#ifndef __ASSEMBLY__ + +typedef __vector128 vector128; + +/* Physical address used by some IO functions */ +#if defined(CONFIG_PPC64) || defined(CONFIG_PHYS_64BIT) +typedef u64 phys_addr_t; +#else +typedef u32 phys_addr_t; +#endif + +#ifdef __powerpc64__ +typedef u64 dma_addr_t; +#else +typedef u32 dma_addr_t; +#endif +typedef u64 dma64_addr_t; + +typedef struct { + unsigned long entry; + unsigned long toc; + unsigned long env; +} func_descr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_TYPES_H */ diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h new file mode 100644 index 000000000000..bd0fb8495154 --- /dev/null +++ b/arch/powerpc/include/asm/uaccess.h @@ -0,0 +1,496 @@ +#ifndef _ARCH_POWERPC_UACCESS_H +#define _ARCH_POWERPC_UACCESS_H + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#include +#include +#include +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + * + * The fs/ds values are now the highest legal address in the "segment". + * This simplifies the checking in the routines below. + */ + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +#define KERNEL_DS MAKE_MM_SEG(~0UL) +#ifdef __powerpc64__ +/* We use TASK_SIZE_USER64 as TASK_SIZE is not constant */ +#define USER_DS MAKE_MM_SEG(TASK_SIZE_USER64 - 1) +#else +#define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) +#endif + +#define get_ds() (KERNEL_DS) +#define get_fs() (current->thread.fs) +#define set_fs(val) (current->thread.fs = (val)) + +#define segment_eq(a, b) ((a).seg == (b).seg) + +#ifdef __powerpc64__ +/* + * This check is sufficient because there is a large enough + * gap between user addresses and the kernel addresses + */ +#define __access_ok(addr, size, segment) \ + (((addr) <= (segment).seg) && ((size) <= (segment).seg)) + +#else + +#define __access_ok(addr, size, segment) \ + (((addr) <= (segment).seg) && \ + (((size) == 0) || (((size) - 1) <= ((segment).seg - (addr))))) + +#endif + +#define access_ok(type, addr, size) \ + (__chk_user_ptr(addr), \ + __access_ok((__force unsigned long)(addr), (size), get_fs())) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry { + unsigned long insn; + unsigned long fixup; +}; + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + * + * This gets kind of ugly. We want to return _two_ values in "get_user()" + * and yet we don't want to do any pointers, because that is too much + * of a performance impact. Thus we have a few rather ugly macros here, + * and hide all the ugliness from the user. + * + * The "__xxx" versions of the user access functions are versions that + * do not verify the address space, that must have been done previously + * with a separate "access_ok()" call (this is used when we do multiple + * accesses to the same area of user memory). + * + * As we use the same address space for kernel and user data on the + * PowerPC, we can just do these as direct assignments. (Of course, the + * exception handling means that it's no longer "just"...) + * + * The "user64" versions of the user access functions are versions that + * allow access of 64-bit data. The "get_user" functions do not + * properly handle 64-bit data because the value gets down cast to a long. + * The "put_user" functions already handle 64-bit data properly but we add + * "user64" versions for completeness + */ +#define get_user(x, ptr) \ + __get_user_check((x), (ptr), sizeof(*(ptr))) +#define put_user(x, ptr) \ + __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) + +#define __get_user(x, ptr) \ + __get_user_nocheck((x), (ptr), sizeof(*(ptr))) +#define __put_user(x, ptr) \ + __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) + +#ifndef __powerpc64__ +#define __get_user64(x, ptr) \ + __get_user64_nocheck((x), (ptr), sizeof(*(ptr))) +#define __put_user64(x, ptr) __put_user(x, ptr) +#endif + +#define __get_user_inatomic(x, ptr) \ + __get_user_nosleep((x), (ptr), sizeof(*(ptr))) +#define __put_user_inatomic(x, ptr) \ + __put_user_nosleep((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) + +#define __get_user_unaligned __get_user +#define __put_user_unaligned __put_user + +extern long __put_user_bad(void); + +/* + * We don't tell gcc that we are accessing memory, but this is OK + * because we do not write to any memory gcc knows about, so there + * are no aliasing issues. + */ +#define __put_user_asm(x, addr, err, op) \ + __asm__ __volatile__( \ + "1: " op " %1,0(%2) # put_user\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%3\n" \ + " b 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + PPC_LONG_ALIGN "\n" \ + PPC_LONG "1b,3b\n" \ + ".previous" \ + : "=r" (err) \ + : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) + +#ifdef __powerpc64__ +#define __put_user_asm2(x, ptr, retval) \ + __put_user_asm(x, ptr, retval, "std") +#else /* __powerpc64__ */ +#define __put_user_asm2(x, addr, err) \ + __asm__ __volatile__( \ + "1: stw %1,0(%2)\n" \ + "2: stw %1+1,4(%2)\n" \ + "3:\n" \ + ".section .fixup,\"ax\"\n" \ + "4: li %0,%3\n" \ + " b 3b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + PPC_LONG_ALIGN "\n" \ + PPC_LONG "1b,4b\n" \ + PPC_LONG "2b,4b\n" \ + ".previous" \ + : "=r" (err) \ + : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) +#endif /* __powerpc64__ */ + +#define __put_user_size(x, ptr, size, retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: __put_user_asm(x, ptr, retval, "stb"); break; \ + case 2: __put_user_asm(x, ptr, retval, "sth"); break; \ + case 4: __put_user_asm(x, ptr, retval, "stw"); break; \ + case 8: __put_user_asm2(x, ptr, retval); break; \ + default: __put_user_bad(); \ + } \ +} while (0) + +#define __put_user_nocheck(x, ptr, size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + if (!is_kernel_addr((unsigned long)__pu_addr)) \ + might_sleep(); \ + __chk_user_ptr(ptr); \ + __put_user_size((x), __pu_addr, (size), __pu_err); \ + __pu_err; \ +}) + +#define __put_user_check(x, ptr, size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + might_sleep(); \ + if (access_ok(VERIFY_WRITE, __pu_addr, size)) \ + __put_user_size((x), __pu_addr, (size), __pu_err); \ + __pu_err; \ +}) + +#define __put_user_nosleep(x, ptr, size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __put_user_size((x), __pu_addr, (size), __pu_err); \ + __pu_err; \ +}) + + +extern long __get_user_bad(void); + +#define __get_user_asm(x, addr, err, op) \ + __asm__ __volatile__( \ + "1: "op" %1,0(%2) # get_user\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%3\n" \ + " li %1,0\n" \ + " b 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + PPC_LONG_ALIGN "\n" \ + PPC_LONG "1b,3b\n" \ + ".previous" \ + : "=r" (err), "=r" (x) \ + : "b" (addr), "i" (-EFAULT), "0" (err)) + +#ifdef __powerpc64__ +#define __get_user_asm2(x, addr, err) \ + __get_user_asm(x, addr, err, "ld") +#else /* __powerpc64__ */ +#define __get_user_asm2(x, addr, err) \ + __asm__ __volatile__( \ + "1: lwz %1,0(%2)\n" \ + "2: lwz %1+1,4(%2)\n" \ + "3:\n" \ + ".section .fixup,\"ax\"\n" \ + "4: li %0,%3\n" \ + " li %1,0\n" \ + " li %1+1,0\n" \ + " b 3b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + PPC_LONG_ALIGN "\n" \ + PPC_LONG "1b,4b\n" \ + PPC_LONG "2b,4b\n" \ + ".previous" \ + : "=r" (err), "=&r" (x) \ + : "b" (addr), "i" (-EFAULT), "0" (err)) +#endif /* __powerpc64__ */ + +#define __get_user_size(x, ptr, size, retval) \ +do { \ + retval = 0; \ + __chk_user_ptr(ptr); \ + if (size > sizeof(x)) \ + (x) = __get_user_bad(); \ + switch (size) { \ + case 1: __get_user_asm(x, ptr, retval, "lbz"); break; \ + case 2: __get_user_asm(x, ptr, retval, "lhz"); break; \ + case 4: __get_user_asm(x, ptr, retval, "lwz"); break; \ + case 8: __get_user_asm2(x, ptr, retval); break; \ + default: (x) = __get_user_bad(); \ + } \ +} while (0) + +#define __get_user_nocheck(x, ptr, size) \ +({ \ + long __gu_err; \ + unsigned long __gu_val; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + if (!is_kernel_addr((unsigned long)__gu_addr)) \ + might_sleep(); \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#ifndef __powerpc64__ +#define __get_user64_nocheck(x, ptr, size) \ +({ \ + long __gu_err; \ + long long __gu_val; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + if (!is_kernel_addr((unsigned long)__gu_addr)) \ + might_sleep(); \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) +#endif /* __powerpc64__ */ + +#define __get_user_check(x, ptr, size) \ +({ \ + long __gu_err = -EFAULT; \ + unsigned long __gu_val = 0; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + might_sleep(); \ + if (access_ok(VERIFY_READ, __gu_addr, (size))) \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_nosleep(x, ptr, size) \ +({ \ + long __gu_err; \ + unsigned long __gu_val; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + + +/* more complex routines */ + +extern unsigned long __copy_tofrom_user(void __user *to, + const void __user *from, unsigned long size); + +#ifndef __powerpc64__ + +static inline unsigned long copy_from_user(void *to, + const void __user *from, unsigned long n) +{ + unsigned long over; + + if (access_ok(VERIFY_READ, from, n)) + return __copy_tofrom_user((__force void __user *)to, from, n); + if ((unsigned long)from < TASK_SIZE) { + over = (unsigned long)from + n - TASK_SIZE; + return __copy_tofrom_user((__force void __user *)to, from, + n - over) + over; + } + return n; +} + +static inline unsigned long copy_to_user(void __user *to, + const void *from, unsigned long n) +{ + unsigned long over; + + if (access_ok(VERIFY_WRITE, to, n)) + return __copy_tofrom_user(to, (__force void __user *)from, n); + if ((unsigned long)to < TASK_SIZE) { + over = (unsigned long)to + n - TASK_SIZE; + return __copy_tofrom_user(to, (__force void __user *)from, + n - over) + over; + } + return n; +} + +#else /* __powerpc64__ */ + +#define __copy_in_user(to, from, size) \ + __copy_tofrom_user((to), (from), (size)) + +extern unsigned long copy_from_user(void *to, const void __user *from, + unsigned long n); +extern unsigned long copy_to_user(void __user *to, const void *from, + unsigned long n); +extern unsigned long copy_in_user(void __user *to, const void __user *from, + unsigned long n); + +#endif /* __powerpc64__ */ + +static inline unsigned long __copy_from_user_inatomic(void *to, + const void __user *from, unsigned long n) +{ + if (__builtin_constant_p(n) && (n <= 8)) { + unsigned long ret = 1; + + switch (n) { + case 1: + __get_user_size(*(u8 *)to, from, 1, ret); + break; + case 2: + __get_user_size(*(u16 *)to, from, 2, ret); + break; + case 4: + __get_user_size(*(u32 *)to, from, 4, ret); + break; + case 8: + __get_user_size(*(u64 *)to, from, 8, ret); + break; + } + if (ret == 0) + return 0; + } + return __copy_tofrom_user((__force void __user *)to, from, n); +} + +static inline unsigned long __copy_to_user_inatomic(void __user *to, + const void *from, unsigned long n) +{ + if (__builtin_constant_p(n) && (n <= 8)) { + unsigned long ret = 1; + + switch (n) { + case 1: + __put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret); + break; + case 2: + __put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret); + break; + case 4: + __put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret); + break; + case 8: + __put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret); + break; + } + if (ret == 0) + return 0; + } + return __copy_tofrom_user(to, (__force const void __user *)from, n); +} + +static inline unsigned long __copy_from_user(void *to, + const void __user *from, unsigned long size) +{ + might_sleep(); + return __copy_from_user_inatomic(to, from, size); +} + +static inline unsigned long __copy_to_user(void __user *to, + const void *from, unsigned long size) +{ + might_sleep(); + return __copy_to_user_inatomic(to, from, size); +} + +extern unsigned long __clear_user(void __user *addr, unsigned long size); + +static inline unsigned long clear_user(void __user *addr, unsigned long size) +{ + might_sleep(); + if (likely(access_ok(VERIFY_WRITE, addr, size))) + return __clear_user(addr, size); + if ((unsigned long)addr < TASK_SIZE) { + unsigned long over = (unsigned long)addr + size - TASK_SIZE; + return __clear_user(addr, size - over) + over; + } + return size; +} + +extern int __strncpy_from_user(char *dst, const char __user *src, long count); + +static inline long strncpy_from_user(char *dst, const char __user *src, + long count) +{ + might_sleep(); + if (likely(access_ok(VERIFY_READ, src, 1))) + return __strncpy_from_user(dst, src, count); + return -EFAULT; +} + +/* + * Return the size of a string (including the ending 0) + * + * Return 0 for error + */ +extern int __strnlen_user(const char __user *str, long len, unsigned long top); + +/* + * Returns the length of the string at str (including the null byte), + * or 0 if we hit a page we can't access, + * or something > len if we didn't find a null byte. + * + * The `top' parameter to __strnlen_user is to make sure that + * we can never overflow from the user area into kernel space. + */ +static inline int strnlen_user(const char __user *str, long len) +{ + unsigned long top = current->thread.fs.seg; + + if ((unsigned long)str > top) + return 0; + return __strnlen_user(str, len, top); +} + +#define strlen_user(str) strnlen_user((str), 0x7ffffffe) + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ + +#endif /* _ARCH_POWERPC_UACCESS_H */ diff --git a/arch/powerpc/include/asm/ucc.h b/arch/powerpc/include/asm/ucc.h new file mode 100644 index 000000000000..46b09ba6bead --- /dev/null +++ b/arch/powerpc/include/asm/ucc.h @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * Description: + * Internal header file for UCC unit routines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __UCC_H__ +#define __UCC_H__ + +#include +#include + +#define STATISTICS + +#define UCC_MAX_NUM 8 + +/* Slow or fast type for UCCs. +*/ +enum ucc_speed_type { + UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX, + UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX +}; + +/* ucc_set_type + * Sets UCC to slow or fast mode. + * + * ucc_num - (In) number of UCC (0-7). + * speed - (In) slow or fast mode for UCC. + */ +int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed); + +int ucc_set_qe_mux_mii_mng(unsigned int ucc_num); + +int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock, + enum comm_dir mode); + +int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask); + +/* QE MUX clock routing for UCC +*/ +static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set) +{ + return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT); +} + +static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set) +{ + return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA); +} + +static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set) +{ + return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT); +} + +#endif /* __UCC_H__ */ diff --git a/arch/powerpc/include/asm/ucc_fast.h b/arch/powerpc/include/asm/ucc_fast.h new file mode 100644 index 000000000000..839aab8bf37d --- /dev/null +++ b/arch/powerpc/include/asm/ucc_fast.h @@ -0,0 +1,244 @@ +/* + * Internal header file for UCC FAST unit routines. + * + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __UCC_FAST_H__ +#define __UCC_FAST_H__ + +#include + +#include +#include + +#include "ucc.h" + +/* Receive BD's status */ +#define R_E 0x80000000 /* buffer empty */ +#define R_W 0x20000000 /* wrap bit */ +#define R_I 0x10000000 /* interrupt on reception */ +#define R_L 0x08000000 /* last */ +#define R_F 0x04000000 /* first */ + +/* transmit BD's status */ +#define T_R 0x80000000 /* ready bit */ +#define T_W 0x20000000 /* wrap bit */ +#define T_I 0x10000000 /* interrupt on completion */ +#define T_L 0x08000000 /* last */ + +/* Rx Data buffer must be 4 bytes aligned in most cases */ +#define UCC_FAST_RX_ALIGN 4 +#define UCC_FAST_MRBLR_ALIGNMENT 4 +#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8 + +/* Sizes */ +#define UCC_FAST_URFS_MIN_VAL 0x88 +#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8 + +/* ucc_fast_channel_protocol_mode - UCC FAST mode */ +enum ucc_fast_channel_protocol_mode { + UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000, + UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001, + UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002, + UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003, + UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004, + UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005, + UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006, + UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007, + UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008, + UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009, + UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A, + UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B, + UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C, + UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D, + UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E, + UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F +}; + +/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */ +enum ucc_fast_transparent_txrx { + UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000, + UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000 +}; + +/* UCC fast diagnostic mode */ +enum ucc_fast_diag_mode { + UCC_FAST_DIAGNOSTIC_NORMAL = 0x0, + UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000, + UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000, + UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000 +}; + +/* UCC fast Sync length (transparent mode only) */ +enum ucc_fast_sync_len { + UCC_FAST_SYNC_LEN_NOT_USED = 0x0, + UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000, + UCC_FAST_SYNC_LEN_8_BIT = 0x00008000, + UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000 +}; + +/* UCC fast RTS mode */ +enum ucc_fast_ready_to_send { + UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000, + UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000 +}; + +/* UCC fast receiver decoding mode */ +enum ucc_fast_rx_decoding_method { + UCC_FAST_RX_ENCODING_NRZ = 0x00000000, + UCC_FAST_RX_ENCODING_NRZI = 0x00000800, + UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000, + UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800 +}; + +/* UCC fast transmitter encoding mode */ +enum ucc_fast_tx_encoding_method { + UCC_FAST_TX_ENCODING_NRZ = 0x00000000, + UCC_FAST_TX_ENCODING_NRZI = 0x00000100, + UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200, + UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300 +}; + +/* UCC fast CRC length */ +enum ucc_fast_transparent_tcrc { + UCC_FAST_16_BIT_CRC = 0x00000000, + UCC_FAST_CRC_RESERVED0 = 0x00000040, + UCC_FAST_32_BIT_CRC = 0x00000080, + UCC_FAST_CRC_RESERVED1 = 0x000000C0 +}; + +/* Fast UCC initialization structure */ +struct ucc_fast_info { + int ucc_num; + enum qe_clock rx_clock; + enum qe_clock tx_clock; + u32 regs; + int irq; + u32 uccm_mask; + int bd_mem_part; + int brkpt_support; + int grant_support; + int tsa; + int cdp; + int cds; + int ctsp; + int ctss; + int tci; + int txsy; + int rtsm; + int revd; + int rsyn; + u16 max_rx_buf_length; + u16 urfs; + u16 urfet; + u16 urfset; + u16 utfs; + u16 utfet; + u16 utftt; + u16 ufpt; + enum ucc_fast_channel_protocol_mode mode; + enum ucc_fast_transparent_txrx ttx_trx; + enum ucc_fast_tx_encoding_method tenc; + enum ucc_fast_rx_decoding_method renc; + enum ucc_fast_transparent_tcrc tcrc; + enum ucc_fast_sync_len synl; +}; + +struct ucc_fast_private { + struct ucc_fast_info *uf_info; + struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */ + u32 __iomem *p_ucce; /* a pointer to the event register in memory. */ + u32 __iomem *p_uccm; /* a pointer to the mask register in memory. */ +#ifdef CONFIG_UGETH_TX_ON_DEMAND + u16 __iomem *p_utodr; /* pointer to the transmit on demand register */ +#endif + int enabled_tx; /* Whether channel is enabled for Tx (ENT) */ + int enabled_rx; /* Whether channel is enabled for Rx (ENR) */ + int stopped_tx; /* Whether channel has been stopped for Tx + (STOP_TX, etc.) */ + int stopped_rx; /* Whether channel has been stopped for Rx */ + u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx + virtual fifo */ + u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx + virtual fifo */ +#ifdef STATISTICS + u32 tx_frames; /* Transmitted frames counter. */ + u32 rx_frames; /* Received frames counter (only frames + passed to application). */ + u32 tx_discarded; /* Discarded tx frames counter (frames that + were discarded by the driver due to errors). + */ + u32 rx_discarded; /* Discarded rx frames counter (frames that + were discarded by the driver due to errors). + */ +#endif /* STATISTICS */ + u16 mrblr; /* maximum receive buffer length */ +}; + +/* ucc_fast_init + * Initializes Fast UCC according to user provided parameters. + * + * uf_info - (In) pointer to the fast UCC info structure. + * uccf_ret - (Out) pointer to the fast UCC structure. + */ +int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret); + +/* ucc_fast_free + * Frees all resources for fast UCC. + * + * uccf - (In) pointer to the fast UCC structure. + */ +void ucc_fast_free(struct ucc_fast_private * uccf); + +/* ucc_fast_enable + * Enables a fast UCC port. + * This routine enables Tx and/or Rx through the General UCC Mode Register. + * + * uccf - (In) pointer to the fast UCC structure. + * mode - (In) TX, RX, or both. + */ +void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode); + +/* ucc_fast_disable + * Disables a fast UCC port. + * This routine disables Tx and/or Rx through the General UCC Mode Register. + * + * uccf - (In) pointer to the fast UCC structure. + * mode - (In) TX, RX, or both. + */ +void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode); + +/* ucc_fast_irq + * Handles interrupts on fast UCC. + * Called from the general interrupt routine to handle interrupts on fast UCC. + * + * uccf - (In) pointer to the fast UCC structure. + */ +void ucc_fast_irq(struct ucc_fast_private * uccf); + +/* ucc_fast_transmit_on_demand + * Immediately forces a poll of the transmitter for data to be sent. + * Typically, the hardware performs a periodic poll for data that the + * transmit routine has set up to be transmitted. In cases where + * this polling cycle is not soon enough, this optional routine can + * be invoked to force a poll right away, instead. Proper use for + * each transmission for which this functionality is desired is to + * call the transmit routine and then this routine right after. + * + * uccf - (In) pointer to the fast UCC structure. + */ +void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf); + +u32 ucc_fast_get_qe_cr_subblock(int uccf_num); + +void ucc_fast_dump_regs(struct ucc_fast_private * uccf); + +#endif /* __UCC_FAST_H__ */ diff --git a/arch/powerpc/include/asm/ucc_slow.h b/arch/powerpc/include/asm/ucc_slow.h new file mode 100644 index 000000000000..0980e6ad335b --- /dev/null +++ b/arch/powerpc/include/asm/ucc_slow.h @@ -0,0 +1,290 @@ +/* + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * Description: + * Internal header file for UCC SLOW unit routines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __UCC_SLOW_H__ +#define __UCC_SLOW_H__ + +#include + +#include +#include + +#include "ucc.h" + +/* transmit BD's status */ +#define T_R 0x80000000 /* ready bit */ +#define T_PAD 0x40000000 /* add pads to short frames */ +#define T_W 0x20000000 /* wrap bit */ +#define T_I 0x10000000 /* interrupt on completion */ +#define T_L 0x08000000 /* last */ + +#define T_A 0x04000000 /* Address - the data transmitted as address + chars */ +#define T_TC 0x04000000 /* transmit CRC */ +#define T_CM 0x02000000 /* continuous mode */ +#define T_DEF 0x02000000 /* collision on previous attempt to transmit */ +#define T_P 0x01000000 /* Preamble - send Preamble sequence before + data */ +#define T_HB 0x01000000 /* heartbeat */ +#define T_NS 0x00800000 /* No Stop */ +#define T_LC 0x00800000 /* late collision */ +#define T_RL 0x00400000 /* retransmission limit */ +#define T_UN 0x00020000 /* underrun */ +#define T_CT 0x00010000 /* CTS lost */ +#define T_CSL 0x00010000 /* carrier sense lost */ +#define T_RC 0x003c0000 /* retry count */ + +/* Receive BD's status */ +#define R_E 0x80000000 /* buffer empty */ +#define R_W 0x20000000 /* wrap bit */ +#define R_I 0x10000000 /* interrupt on reception */ +#define R_L 0x08000000 /* last */ +#define R_C 0x08000000 /* the last byte in this buffer is a cntl + char */ +#define R_F 0x04000000 /* first */ +#define R_A 0x04000000 /* the first byte in this buffer is address + byte */ +#define R_CM 0x02000000 /* continuous mode */ +#define R_ID 0x01000000 /* buffer close on reception of idles */ +#define R_M 0x01000000 /* Frame received because of promiscuous + mode */ +#define R_AM 0x00800000 /* Address match */ +#define R_DE 0x00800000 /* Address match */ +#define R_LG 0x00200000 /* Break received */ +#define R_BR 0x00200000 /* Frame length violation */ +#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */ +#define R_FR 0x00100000 /* Framing Error (no stop bit) character + received */ +#define R_PR 0x00080000 /* Parity Error character received */ +#define R_AB 0x00080000 /* Frame Aborted */ +#define R_SH 0x00080000 /* frame is too short */ +#define R_CR 0x00040000 /* CRC Error */ +#define R_OV 0x00020000 /* Overrun */ +#define R_CD 0x00010000 /* CD lost */ +#define R_CL 0x00010000 /* this frame is closed because of a + collision */ + +/* Rx Data buffer must be 4 bytes aligned in most cases.*/ +#define UCC_SLOW_RX_ALIGN 4 +#define UCC_SLOW_MRBLR_ALIGNMENT 4 +#define UCC_SLOW_PRAM_SIZE 0x100 +#define ALIGNMENT_OF_UCC_SLOW_PRAM 64 + +/* UCC Slow Channel Protocol Mode */ +enum ucc_slow_channel_protocol_mode { + UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002, + UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004, + UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008, +}; + +/* UCC Slow Transparent Transmit CRC (TCRC) */ +enum ucc_slow_transparent_tcrc { + /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */ + UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000, + /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */ + UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000, + /* 32-bit CCITT CRC (Ethernet and HDLC) */ + UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000, +}; + +/* UCC Slow oversampling rate for transmitter (TDCR) */ +enum ucc_slow_tx_oversampling_rate { + /* 1x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000, + /* 8x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000, + /* 16x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000, + /* 32x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000, +}; + +/* UCC Slow Oversampling rate for receiver (RDCR) +*/ +enum ucc_slow_rx_oversampling_rate { + /* 1x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000, + /* 8x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000, + /* 16x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000, + /* 32x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000, +}; + +/* UCC Slow Transmitter encoding method (TENC) +*/ +enum ucc_slow_tx_encoding_method { + UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000, + UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100 +}; + +/* UCC Slow Receiver decoding method (RENC) +*/ +enum ucc_slow_rx_decoding_method { + UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000, + UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800 +}; + +/* UCC Slow Diagnostic mode (DIAG) +*/ +enum ucc_slow_diag_mode { + UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000, + UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040, + UCC_SLOW_DIAG_MODE_ECHO = 0x00000080, + UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0 +}; + +struct ucc_slow_info { + int ucc_num; + int protocol; /* QE_CR_PROTOCOL_xxx */ + enum qe_clock rx_clock; + enum qe_clock tx_clock; + phys_addr_t regs; + int irq; + u16 uccm_mask; + int data_mem_part; + int init_tx; + int init_rx; + u32 tx_bd_ring_len; + u32 rx_bd_ring_len; + int rx_interrupts; + int brkpt_support; + int grant_support; + int tsa; + int cdp; + int cds; + int ctsp; + int ctss; + int rinv; + int tinv; + int rtsm; + int rfw; + int tci; + int tend; + int tfl; + int txsy; + u16 max_rx_buf_length; + enum ucc_slow_transparent_tcrc tcrc; + enum ucc_slow_channel_protocol_mode mode; + enum ucc_slow_diag_mode diag; + enum ucc_slow_tx_oversampling_rate tdcr; + enum ucc_slow_rx_oversampling_rate rdcr; + enum ucc_slow_tx_encoding_method tenc; + enum ucc_slow_rx_decoding_method renc; +}; + +struct ucc_slow_private { + struct ucc_slow_info *us_info; + struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */ + struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */ + u32 us_pram_offset; + int enabled_tx; /* Whether channel is enabled for Tx (ENT) */ + int enabled_rx; /* Whether channel is enabled for Rx (ENR) */ + int stopped_tx; /* Whether channel has been stopped for Tx + (STOP_TX, etc.) */ + int stopped_rx; /* Whether channel has been stopped for Rx */ + struct list_head confQ; /* frames passed to chip waiting for tx */ + u32 first_tx_bd_mask; /* mask is used in Tx routine to save status + and length for first BD in a frame */ + u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */ + u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */ + struct qe_bd *confBd; /* next BD for confirm after Tx */ + struct qe_bd *tx_bd; /* next BD for new Tx request */ + struct qe_bd *rx_bd; /* next BD to collect after Rx */ + void *p_rx_frame; /* accumulating receive frame */ + u16 *p_ucce; /* a pointer to the event register in memory. + */ + u16 *p_uccm; /* a pointer to the mask register in memory */ + u16 saved_uccm; /* a saved mask for the RX Interrupt bits */ +#ifdef STATISTICS + u32 tx_frames; /* Transmitted frames counters */ + u32 rx_frames; /* Received frames counters (only frames + passed to application) */ + u32 rx_discarded; /* Discarded frames counters (frames that + were discarded by the driver due to + errors) */ +#endif /* STATISTICS */ +}; + +/* ucc_slow_init + * Initializes Slow UCC according to provided parameters. + * + * us_info - (In) pointer to the slow UCC info structure. + * uccs_ret - (Out) pointer to the slow UCC structure. + */ +int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret); + +/* ucc_slow_free + * Frees all resources for slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_free(struct ucc_slow_private * uccs); + +/* ucc_slow_enable + * Enables a fast UCC port. + * This routine enables Tx and/or Rx through the General UCC Mode Register. + * + * uccs - (In) pointer to the slow UCC structure. + * mode - (In) TX, RX, or both. + */ +void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode); + +/* ucc_slow_disable + * Disables a fast UCC port. + * This routine disables Tx and/or Rx through the General UCC Mode Register. + * + * uccs - (In) pointer to the slow UCC structure. + * mode - (In) TX, RX, or both. + */ +void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode); + +/* ucc_slow_poll_transmitter_now + * Immediately forces a poll of the transmitter for data to be sent. + * Typically, the hardware performs a periodic poll for data that the + * transmit routine has set up to be transmitted. In cases where + * this polling cycle is not soon enough, this optional routine can + * be invoked to force a poll right away, instead. Proper use for + * each transmission for which this functionality is desired is to + * call the transmit routine and then this routine right after. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs); + +/* ucc_slow_graceful_stop_tx + * Smoothly stops transmission on a specified slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs); + +/* ucc_slow_stop_tx + * Stops transmission on a specified slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_stop_tx(struct ucc_slow_private * uccs); + +/* ucc_slow_restart_tx + * Restarts transmitting on a specified slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_restart_tx(struct ucc_slow_private *uccs); + +u32 ucc_slow_get_qe_cr_subblock(int uccs_num); + +#endif /* __UCC_SLOW_H__ */ diff --git a/arch/powerpc/include/asm/ucontext.h b/arch/powerpc/include/asm/ucontext.h new file mode 100644 index 000000000000..d9a4ddf0cc86 --- /dev/null +++ b/arch/powerpc/include/asm/ucontext.h @@ -0,0 +1,40 @@ +#ifndef _ASM_POWERPC_UCONTEXT_H +#define _ASM_POWERPC_UCONTEXT_H + +#ifdef __powerpc64__ +#include +#else +#include +#endif +#include + +#ifndef __powerpc64__ +struct mcontext { + elf_gregset_t mc_gregs; + elf_fpregset_t mc_fregs; + unsigned long mc_pad[2]; + elf_vrregset_t mc_vregs __attribute__((__aligned__(16))); +}; +#endif + +struct ucontext { + unsigned long uc_flags; + struct ucontext __user *uc_link; + stack_t uc_stack; +#ifndef __powerpc64__ + int uc_pad[7]; + struct mcontext __user *uc_regs;/* points to uc_mcontext field */ +#endif + sigset_t uc_sigmask; + /* glibc has 1024-bit signal masks, ours are 64-bit */ +#ifdef __powerpc64__ + sigset_t __unused[15]; /* Allow for uc_sigmask growth */ + struct sigcontext uc_mcontext; /* last for extensibility */ +#else + int uc_maskext[30]; + int uc_pad2[3]; + struct mcontext uc_mcontext; +#endif +}; + +#endif /* _ASM_POWERPC_UCONTEXT_H */ diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h new file mode 100644 index 000000000000..6418ceea44b7 --- /dev/null +++ b/arch/powerpc/include/asm/udbg.h @@ -0,0 +1,55 @@ +/* + * (c) 2001, 2006 IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_POWERPC_UDBG_H +#define _ASM_POWERPC_UDBG_H +#ifdef __KERNEL__ + +#include +#include + +extern void (*udbg_putc)(char c); +extern int (*udbg_getc)(void); +extern int (*udbg_getc_poll)(void); + +extern void udbg_puts(const char *s); +extern int udbg_write(const char *s, int n); +extern int udbg_read(char *buf, int buflen); + +extern void register_early_udbg_console(void); +extern void udbg_printf(const char *fmt, ...) + __attribute__ ((format (printf, 1, 2))); +extern void udbg_progress(char *s, unsigned short hex); + +extern void udbg_init_uart(void __iomem *comport, unsigned int speed, + unsigned int clock); +extern unsigned int udbg_probe_uart_speed(void __iomem *comport, + unsigned int clock); + +struct device_node; +extern void udbg_scc_init(int force_scc); +extern int udbg_adb_init(int force_btext); +extern void udbg_adb_init_early(void); + +extern void __init udbg_early_init(void); +extern void __init udbg_init_debug_lpar(void); +extern void __init udbg_init_pmac_realmode(void); +extern void __init udbg_init_maple_realmode(void); +extern void __init udbg_init_pas_realmode(void); +extern void __init udbg_init_iseries(void); +extern void __init udbg_init_rtas_panel(void); +extern void __init udbg_init_rtas_console(void); +extern void __init udbg_init_debug_beat(void); +extern void __init udbg_init_btext(void); +extern void __init udbg_init_44x_as1(void); +extern void __init udbg_init_40x_realmode(void); +extern void __init udbg_init_cpm(void); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_UDBG_H */ diff --git a/arch/powerpc/include/asm/uic.h b/arch/powerpc/include/asm/uic.h new file mode 100644 index 000000000000..597edfcae3d6 --- /dev/null +++ b/arch/powerpc/include/asm/uic.h @@ -0,0 +1,21 @@ +/* + * IBM PPC4xx UIC external definitions and structure. + * + * Maintainer: David Gibson + * Copyright 2007 IBM Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_POWERPC_UIC_H +#define _ASM_POWERPC_UIC_H + +#ifdef __KERNEL__ + +extern void __init uic_init_tree(void); +extern unsigned int uic_get_irq(void); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_UIC_H */ diff --git a/arch/powerpc/include/asm/unaligned.h b/arch/powerpc/include/asm/unaligned.h new file mode 100644 index 000000000000..5f1b1e3c2137 --- /dev/null +++ b/arch/powerpc/include/asm/unaligned.h @@ -0,0 +1,16 @@ +#ifndef _ASM_POWERPC_UNALIGNED_H +#define _ASM_POWERPC_UNALIGNED_H + +#ifdef __KERNEL__ + +/* + * The PowerPC can do unaligned accesses itself in big endian mode. + */ +#include +#include + +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_UNALIGNED_H */ diff --git a/arch/powerpc/include/asm/uninorth.h b/arch/powerpc/include/asm/uninorth.h new file mode 100644 index 000000000000..f737732c3861 --- /dev/null +++ b/arch/powerpc/include/asm/uninorth.h @@ -0,0 +1,229 @@ +/* + * uninorth.h: definitions for using the "UniNorth" host bridge chip + * from Apple. This chip is used on "Core99" machines + * This also includes U2 used on more recent MacRISC2/3 + * machines and U3 (G5) + * + */ +#ifdef __KERNEL__ +#ifndef __ASM_UNINORTH_H__ +#define __ASM_UNINORTH_H__ + +/* + * Uni-N and U3 config space reg. definitions + * + * (Little endian) + */ + +/* Address ranges selection. This one should work with Bandit too */ +/* Not U3 */ +#define UNI_N_ADDR_SELECT 0x48 +#define UNI_N_ADDR_COARSE_MASK 0xffff0000 /* 256Mb regions at *0000000 */ +#define UNI_N_ADDR_FINE_MASK 0x0000ffff /* 16Mb regions at f*000000 */ + +/* AGP registers */ +/* Not U3 */ +#define UNI_N_CFG_GART_BASE 0x8c +#define UNI_N_CFG_AGP_BASE 0x90 +#define UNI_N_CFG_GART_CTRL 0x94 +#define UNI_N_CFG_INTERNAL_STATUS 0x98 +#define UNI_N_CFG_GART_DUMMY_PAGE 0xa4 + +/* UNI_N_CFG_GART_CTRL bits definitions */ +#define UNI_N_CFG_GART_INVAL 0x00000001 +#define UNI_N_CFG_GART_ENABLE 0x00000100 +#define UNI_N_CFG_GART_2xRESET 0x00010000 +#define UNI_N_CFG_GART_DISSBADET 0x00020000 +/* The following seems to only be used only on U3 */ +#define U3_N_CFG_GART_SYNCMODE 0x00040000 +#define U3_N_CFG_GART_PERFRD 0x00080000 +#define U3_N_CFG_GART_B2BGNT 0x00200000 +#define U3_N_CFG_GART_FASTDDR 0x00400000 + +/* My understanding of UniNorth AGP as of UniNorth rev 1.0x, + * revision 1.5 (x4 AGP) may need further changes. + * + * AGP_BASE register contains the base address of the AGP aperture on + * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x, + * even if decoding of this address range is enabled in the address select + * register. Apparently, the only supported bases are 256Mb multiples + * (high 4 bits of that register). + * + * GART_BASE register appear to contain the physical address of the GART + * in system memory in the high address bits (page aligned), and the + * GART size in the low order bits (number of GART pages) + * + * The GART format itself is one 32bits word per physical memory page. + * This word contains, in little-endian format (!!!), the physical address + * of the page in the high bits, and what appears to be an "enable" bit + * in the LSB bit (0) that must be set to 1 when the entry is valid. + * + * Obviously, the GART is not cache coherent and so any change to it + * must be flushed to memory (or maybe just make the GART space non + * cachable). AGP memory itself doens't seem to be cache coherent neither. + * + * In order to invalidate the GART (which is probably necessary to inval + * the bridge internal TLBs), the following sequence has to be written, + * in order, to the GART_CTRL register: + * + * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL + * UNI_N_CFG_GART_ENABLE + * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET + * UNI_N_CFG_GART_ENABLE + * + * As far as AGP "features" are concerned, it looks like fast write may + * not be supported but this has to be confirmed. + * + * Turning on AGP seem to require a double invalidate operation, one before + * setting the AGP command register, on after. + * + * Turning off AGP seems to require the following sequence: first wait + * for the AGP to be idle by reading the internal status register, then + * write in that order to the GART_CTRL register: + * + * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL + * 0 + * UNI_N_CFG_GART_2xRESET + * 0 + */ + +/* + * Uni-N memory mapped reg. definitions + * + * Those registers are Big-Endian !! + * + * Their meaning come from either Darwin and/or from experiments I made with + * the bootrom, I'm not sure about their exact meaning yet + * + */ + +/* Version of the UniNorth chip */ +#define UNI_N_VERSION 0x0000 /* Known versions: 3,7 and 8 */ + +#define UNI_N_VERSION_107 0x0003 /* 1.0.7 */ +#define UNI_N_VERSION_10A 0x0007 /* 1.0.10 */ +#define UNI_N_VERSION_150 0x0011 /* 1.5 */ +#define UNI_N_VERSION_200 0x0024 /* 2.0 */ +#define UNI_N_VERSION_PANGEA 0x00C0 /* Integrated U1 + K */ +#define UNI_N_VERSION_INTREPID 0x00D2 /* Integrated U2 + K */ +#define UNI_N_VERSION_300 0x0030 /* 3.0 (U3 on G5) */ + +/* This register is used to enable/disable various clocks */ +#define UNI_N_CLOCK_CNTL 0x0020 +#define UNI_N_CLOCK_CNTL_PCI 0x00000001 /* PCI2 clock control */ +#define UNI_N_CLOCK_CNTL_GMAC 0x00000002 /* GMAC clock control */ +#define UNI_N_CLOCK_CNTL_FW 0x00000004 /* FireWire clock control */ +#define UNI_N_CLOCK_CNTL_ATA100 0x00000010 /* ATA-100 clock control (U2) */ + +/* Power Management control */ +#define UNI_N_POWER_MGT 0x0030 +#define UNI_N_POWER_MGT_NORMAL 0x00 +#define UNI_N_POWER_MGT_IDLE2 0x01 +#define UNI_N_POWER_MGT_SLEEP 0x02 + +/* This register is configured by Darwin depending on the UniN + * revision + */ +#define UNI_N_ARB_CTRL 0x0040 +#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15 +#define UNI_N_ARB_CTRL_QACK_DELAY_MASK 0x0e1f8000 +#define UNI_N_ARB_CTRL_QACK_DELAY 0x30 +#define UNI_N_ARB_CTRL_QACK_DELAY105 0x00 + +/* This one _might_ return the CPU number of the CPU reading it; + * the bootROM decides whether to boot or to sleep/spinloop depending + * on this register beeing 0 or not + */ +#define UNI_N_CPU_NUMBER 0x0050 + +/* This register appear to be read by the bootROM to decide what + * to do on a non-recoverable reset (powerup or wakeup) + */ +#define UNI_N_HWINIT_STATE 0x0070 +#define UNI_N_HWINIT_STATE_SLEEPING 0x01 +#define UNI_N_HWINIT_STATE_RUNNING 0x02 +/* This last bit appear to be used by the bootROM to know the second + * CPU has started and will enter it's sleep loop with IP=0 + */ +#define UNI_N_HWINIT_STATE_CPU1_FLAG 0x10000000 + +/* This register controls AACK delay, which is set when 2004 iBook/PowerBook + * is in low speed mode. + */ +#define UNI_N_AACK_DELAY 0x0100 +#define UNI_N_AACK_DELAY_ENABLE 0x00000001 + +/* Clock status for Intrepid */ +#define UNI_N_CLOCK_STOP_STATUS0 0x0150 +#define UNI_N_CLOCK_STOPPED_EXTAGP 0x00200000 +#define UNI_N_CLOCK_STOPPED_AGPDEL 0x00100000 +#define UNI_N_CLOCK_STOPPED_I2S0_45_49 0x00080000 +#define UNI_N_CLOCK_STOPPED_I2S0_18 0x00040000 +#define UNI_N_CLOCK_STOPPED_I2S1_45_49 0x00020000 +#define UNI_N_CLOCK_STOPPED_I2S1_18 0x00010000 +#define UNI_N_CLOCK_STOPPED_TIMER 0x00008000 +#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18 0x00004000 +#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32 0x00002000 +#define UNI_N_CLOCK_STOPPED_SCC_VIA32 0x00001000 +#define UNI_N_CLOCK_STOPPED_SCC_SLOT0 0x00000800 +#define UNI_N_CLOCK_STOPPED_SCC_SLOT1 0x00000400 +#define UNI_N_CLOCK_STOPPED_SCC_SLOT2 0x00000200 +#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO 0x00000100 +#define UNI_N_CLOCK_STOPPED_VEO0 0x00000080 +#define UNI_N_CLOCK_STOPPED_VEO1 0x00000040 +#define UNI_N_CLOCK_STOPPED_USB0 0x00000020 +#define UNI_N_CLOCK_STOPPED_USB1 0x00000010 +#define UNI_N_CLOCK_STOPPED_USB2 0x00000008 +#define UNI_N_CLOCK_STOPPED_32 0x00000004 +#define UNI_N_CLOCK_STOPPED_45 0x00000002 +#define UNI_N_CLOCK_STOPPED_49 0x00000001 + +#define UNI_N_CLOCK_STOP_STATUS1 0x0160 +#define UNI_N_CLOCK_STOPPED_PLL4REF 0x00080000 +#define UNI_N_CLOCK_STOPPED_CPUDEL 0x00040000 +#define UNI_N_CLOCK_STOPPED_CPU 0x00020000 +#define UNI_N_CLOCK_STOPPED_BUF_REFCKO 0x00010000 +#define UNI_N_CLOCK_STOPPED_PCI2 0x00008000 +#define UNI_N_CLOCK_STOPPED_FW 0x00004000 +#define UNI_N_CLOCK_STOPPED_GB 0x00002000 +#define UNI_N_CLOCK_STOPPED_ATA66 0x00001000 +#define UNI_N_CLOCK_STOPPED_ATA100 0x00000800 +#define UNI_N_CLOCK_STOPPED_MAX 0x00000400 +#define UNI_N_CLOCK_STOPPED_PCI1 0x00000200 +#define UNI_N_CLOCK_STOPPED_KLPCI 0x00000100 +#define UNI_N_CLOCK_STOPPED_USB0PCI 0x00000080 +#define UNI_N_CLOCK_STOPPED_USB1PCI 0x00000040 +#define UNI_N_CLOCK_STOPPED_USB2PCI 0x00000020 +#define UNI_N_CLOCK_STOPPED_7PCI1 0x00000008 +#define UNI_N_CLOCK_STOPPED_AGP 0x00000004 +#define UNI_N_CLOCK_STOPPED_PCI0 0x00000002 +#define UNI_N_CLOCK_STOPPED_18 0x00000001 + +/* Intrepid registe to OF do-platform-clockspreading */ +#define UNI_N_CLOCK_SPREADING 0x190 + +/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */ + + +/* + * U3 specific registers + */ + + +/* U3 Toggle */ +#define U3_TOGGLE_REG 0x00e0 +#define U3_PMC_START_STOP 0x0001 +#define U3_MPIC_RESET 0x0002 +#define U3_MPIC_OUTPUT_ENABLE 0x0004 + +/* U3 API PHY Config 1 */ +#define U3_API_PHY_CONFIG_1 0x23030 + +/* U3 HyperTransport registers */ +#define U3_HT_CONFIG_BASE 0x70000 +#define U3_HT_LINK_COMMAND 0x100 +#define U3_HT_LINK_CONFIG 0x110 +#define U3_HT_LINK_FREQ 0x120 + +#endif /* __ASM_UNINORTH_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h new file mode 100644 index 000000000000..e07d0c76ed77 --- /dev/null +++ b/arch/powerpc/include/asm/unistd.h @@ -0,0 +1,398 @@ +#ifndef _ASM_POWERPC_UNISTD_H_ +#define _ASM_POWERPC_UNISTD_H_ + +/* + * This file contains the system call numbers. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_query_module 166 +#define __NR_poll 167 +#define __NR_nfsservctl 168 +#define __NR_setresgid 169 +#define __NR_getresgid 170 +#define __NR_prctl 171 +#define __NR_rt_sigreturn 172 +#define __NR_rt_sigaction 173 +#define __NR_rt_sigprocmask 174 +#define __NR_rt_sigpending 175 +#define __NR_rt_sigtimedwait 176 +#define __NR_rt_sigqueueinfo 177 +#define __NR_rt_sigsuspend 178 +#define __NR_pread64 179 +#define __NR_pwrite64 180 +#define __NR_chown 181 +#define __NR_getcwd 182 +#define __NR_capget 183 +#define __NR_capset 184 +#define __NR_sigaltstack 185 +#define __NR_sendfile 186 +#define __NR_getpmsg 187 /* some people actually want streams */ +#define __NR_putpmsg 188 /* some people actually want streams */ +#define __NR_vfork 189 +#define __NR_ugetrlimit 190 /* SuS compliant getrlimit */ +#define __NR_readahead 191 +#ifndef __powerpc64__ /* these are 32-bit only */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#endif +#define __NR_pciconfig_read 198 +#define __NR_pciconfig_write 199 +#define __NR_pciconfig_iobase 200 +#define __NR_multiplexer 201 +#define __NR_getdents64 202 +#define __NR_pivot_root 203 +#ifndef __powerpc64__ +#define __NR_fcntl64 204 +#endif +#define __NR_madvise 205 +#define __NR_mincore 206 +#define __NR_gettid 207 +#define __NR_tkill 208 +#define __NR_setxattr 209 +#define __NR_lsetxattr 210 +#define __NR_fsetxattr 211 +#define __NR_getxattr 212 +#define __NR_lgetxattr 213 +#define __NR_fgetxattr 214 +#define __NR_listxattr 215 +#define __NR_llistxattr 216 +#define __NR_flistxattr 217 +#define __NR_removexattr 218 +#define __NR_lremovexattr 219 +#define __NR_fremovexattr 220 +#define __NR_futex 221 +#define __NR_sched_setaffinity 222 +#define __NR_sched_getaffinity 223 +/* 224 currently unused */ +#define __NR_tuxcall 225 +#ifndef __powerpc64__ +#define __NR_sendfile64 226 +#endif +#define __NR_io_setup 227 +#define __NR_io_destroy 228 +#define __NR_io_getevents 229 +#define __NR_io_submit 230 +#define __NR_io_cancel 231 +#define __NR_set_tid_address 232 +#define __NR_fadvise64 233 +#define __NR_exit_group 234 +#define __NR_lookup_dcookie 235 +#define __NR_epoll_create 236 +#define __NR_epoll_ctl 237 +#define __NR_epoll_wait 238 +#define __NR_remap_file_pages 239 +#define __NR_timer_create 240 +#define __NR_timer_settime 241 +#define __NR_timer_gettime 242 +#define __NR_timer_getoverrun 243 +#define __NR_timer_delete 244 +#define __NR_clock_settime 245 +#define __NR_clock_gettime 246 +#define __NR_clock_getres 247 +#define __NR_clock_nanosleep 248 +#define __NR_swapcontext 249 +#define __NR_tgkill 250 +#define __NR_utimes 251 +#define __NR_statfs64 252 +#define __NR_fstatfs64 253 +#ifndef __powerpc64__ +#define __NR_fadvise64_64 254 +#endif +#define __NR_rtas 255 +#define __NR_sys_debug_setcontext 256 +/* Number 257 is reserved for vserver */ +#define __NR_migrate_pages 258 +#define __NR_mbind 259 +#define __NR_get_mempolicy 260 +#define __NR_set_mempolicy 261 +#define __NR_mq_open 262 +#define __NR_mq_unlink 263 +#define __NR_mq_timedsend 264 +#define __NR_mq_timedreceive 265 +#define __NR_mq_notify 266 +#define __NR_mq_getsetattr 267 +#define __NR_kexec_load 268 +#define __NR_add_key 269 +#define __NR_request_key 270 +#define __NR_keyctl 271 +#define __NR_waitid 272 +#define __NR_ioprio_set 273 +#define __NR_ioprio_get 274 +#define __NR_inotify_init 275 +#define __NR_inotify_add_watch 276 +#define __NR_inotify_rm_watch 277 +#define __NR_spu_run 278 +#define __NR_spu_create 279 +#define __NR_pselect6 280 +#define __NR_ppoll 281 +#define __NR_unshare 282 +#define __NR_splice 283 +#define __NR_tee 284 +#define __NR_vmsplice 285 +#define __NR_openat 286 +#define __NR_mkdirat 287 +#define __NR_mknodat 288 +#define __NR_fchownat 289 +#define __NR_futimesat 290 +#ifdef __powerpc64__ +#define __NR_newfstatat 291 +#else +#define __NR_fstatat64 291 +#endif +#define __NR_unlinkat 292 +#define __NR_renameat 293 +#define __NR_linkat 294 +#define __NR_symlinkat 295 +#define __NR_readlinkat 296 +#define __NR_fchmodat 297 +#define __NR_faccessat 298 +#define __NR_get_robust_list 299 +#define __NR_set_robust_list 300 +#define __NR_move_pages 301 +#define __NR_getcpu 302 +#define __NR_epoll_pwait 303 +#define __NR_utimensat 304 +#define __NR_signalfd 305 +#define __NR_timerfd_create 306 +#define __NR_eventfd 307 +#define __NR_sync_file_range2 308 +#define __NR_fallocate 309 +#define __NR_subpage_prot 310 +#define __NR_timerfd_settime 311 +#define __NR_timerfd_gettime 312 +#define __NR_signalfd4 313 +#define __NR_eventfd2 314 +#define __NR_epoll_create1 315 +#define __NR_dup3 316 +#define __NR_pipe2 317 +#define __NR_inotify_init1 318 + +#ifdef __KERNEL__ + +#define __NR_syscalls 319 + +#define __NR__exit __NR_exit +#define NR_syscalls __NR_syscalls + +#ifndef __ASSEMBLY__ + +#include +#include +#include + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND +#ifdef CONFIG_PPC32 +#define __ARCH_WANT_OLD_STAT +#endif +#ifdef CONFIG_PPC64 +#define __ARCH_WANT_COMPAT_SYS_TIME +#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND +#define __ARCH_WANT_SYS_NEWFSTATAT +#endif + +/* + * "Conditional" syscalls + */ +#define cond_syscall(x) \ + asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall"))) + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_UNISTD_H_ */ diff --git a/arch/powerpc/include/asm/user.h b/arch/powerpc/include/asm/user.h new file mode 100644 index 000000000000..3fd4545dd74e --- /dev/null +++ b/arch/powerpc/include/asm/user.h @@ -0,0 +1,51 @@ +#ifndef _ASM_POWERPC_USER_H +#define _ASM_POWERPC_USER_H + +#include +#include + +/* + * Adapted from + * + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd, NOT the osf-core). The file contents + * are as follows: + * + * upage: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page long. + * data: The data segment follows next. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * stack: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these in order to be able + * to write an integer number of pages. + */ +struct user { + struct pt_regs regs; /* entire machine state */ + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + unsigned long u_ar0; /* help gdb find registers */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) +#endif /* _ASM_POWERPC_USER_H */ diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h new file mode 100644 index 000000000000..26fc449bd989 --- /dev/null +++ b/arch/powerpc/include/asm/vdso.h @@ -0,0 +1,78 @@ +#ifndef __PPC64_VDSO_H__ +#define __PPC64_VDSO_H__ + +#ifdef __KERNEL__ + +/* Default link addresses for the vDSOs */ +#define VDSO32_LBASE 0x100000 +#define VDSO64_LBASE 0x100000 + +/* Default map addresses */ +#define VDSO32_MBASE VDSO32_LBASE +#define VDSO64_MBASE VDSO64_LBASE + +#define VDSO_VERSION_STRING LINUX_2.6.15 + +/* Define if 64 bits VDSO has procedure descriptors */ +#undef VDS64_HAS_DESCRIPTORS + +#ifndef __ASSEMBLY__ + +/* Offsets relative to thread->vdso_base */ +extern unsigned long vdso64_rt_sigtramp; +extern unsigned long vdso32_sigtramp; +extern unsigned long vdso32_rt_sigtramp; + +#else /* __ASSEMBLY__ */ + +#ifdef __VDSO64__ +#ifdef VDS64_HAS_DESCRIPTORS +#define V_FUNCTION_BEGIN(name) \ + .globl name; \ + .section ".opd","a"; \ + .align 3; \ + name: \ + .quad .name,.TOC.@tocbase,0; \ + .previous; \ + .globl .name; \ + .type .name,@function; \ + .name: \ + +#define V_FUNCTION_END(name) \ + .size .name,.-.name; + +#define V_LOCAL_FUNC(name) (.name) + +#else /* VDS64_HAS_DESCRIPTORS */ + +#define V_FUNCTION_BEGIN(name) \ + .globl name; \ + name: \ + +#define V_FUNCTION_END(name) \ + .size name,.-name; + +#define V_LOCAL_FUNC(name) (name) + +#endif /* VDS64_HAS_DESCRIPTORS */ +#endif /* __VDSO64__ */ + +#ifdef __VDSO32__ + +#define V_FUNCTION_BEGIN(name) \ + .globl name; \ + .type name,@function; \ + name: \ + +#define V_FUNCTION_END(name) \ + .size name,.-name; + +#define V_LOCAL_FUNC(name) (name) + +#endif /* __VDSO32__ */ + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* __PPC64_VDSO_H__ */ diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h new file mode 100644 index 000000000000..f01393224b52 --- /dev/null +++ b/arch/powerpc/include/asm/vdso_datapage.h @@ -0,0 +1,121 @@ +#ifndef _VDSO_DATAPAGE_H +#define _VDSO_DATAPAGE_H +#ifdef __KERNEL__ + +/* + * Copyright (C) 2002 Peter Bergner , IBM + * Copyright (C) 2005 Benjamin Herrenschmidy , + * IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + + +/* + * Note about this structure: + * + * This structure was historically called systemcfg and exposed to + * userland via /proc/ppc64/systemcfg. Unfortunately, this became an + * ABI issue as some proprietary software started relying on being able + * to mmap() it, thus we have to keep the base layout at least for a + * few kernel versions. + * + * However, since ppc32 doesn't suffer from this backward handicap, + * a simpler version of the data structure is used there with only the + * fields actually used by the vDSO. + * + */ + +/* + * If the major version changes we are incompatible. + * Minor version changes are a hint. + */ +#define SYSTEMCFG_MAJOR 1 +#define SYSTEMCFG_MINOR 1 + +#ifndef __ASSEMBLY__ + +#include + +#define SYSCALL_MAP_SIZE ((__NR_syscalls + 31) / 32) + +/* + * So here is the ppc64 backward compatible version + */ + +#ifdef CONFIG_PPC64 + +struct vdso_data { + __u8 eye_catcher[16]; /* Eyecatcher: SYSTEMCFG:PPC64 0x00 */ + struct { /* Systemcfg version numbers */ + __u32 major; /* Major number 0x10 */ + __u32 minor; /* Minor number 0x14 */ + } version; + + /* Note about the platform flags: it now only contains the lpar + * bit. The actual platform number is dead and burried + */ + __u32 platform; /* Platform flags 0x18 */ + __u32 processor; /* Processor type 0x1C */ + __u64 processorCount; /* # of physical processors 0x20 */ + __u64 physicalMemorySize; /* Size of real memory(B) 0x28 */ + __u64 tb_orig_stamp; /* Timebase at boot 0x30 */ + __u64 tb_ticks_per_sec; /* Timebase tics / sec 0x38 */ + __u64 tb_to_xs; /* Inverse of TB to 2^20 0x40 */ + __u64 stamp_xsec; /* 0x48 */ + __u64 tb_update_count; /* Timebase atomicity ctr 0x50 */ + __u32 tz_minuteswest; /* Minutes west of Greenwich 0x58 */ + __u32 tz_dsttime; /* Type of dst correction 0x5C */ + __u32 dcache_size; /* L1 d-cache size 0x60 */ + __u32 dcache_line_size; /* L1 d-cache line size 0x64 */ + __u32 icache_size; /* L1 i-cache size 0x68 */ + __u32 icache_line_size; /* L1 i-cache line size 0x6C */ + + /* those additional ones don't have to be located anywhere + * special as they were not part of the original systemcfg + */ + __u32 dcache_block_size; /* L1 d-cache block size */ + __u32 icache_block_size; /* L1 i-cache block size */ + __u32 dcache_log_block_size; /* L1 d-cache log block size */ + __u32 icache_log_block_size; /* L1 i-cache log block size */ + __s32 wtom_clock_sec; /* Wall to monotonic clock */ + __s32 wtom_clock_nsec; + __u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls */ + __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ +}; + +#else /* CONFIG_PPC64 */ + +/* + * And here is the simpler 32 bits version + */ +struct vdso_data { + __u64 tb_orig_stamp; /* Timebase at boot 0x30 */ + __u64 tb_ticks_per_sec; /* Timebase tics / sec 0x38 */ + __u64 tb_to_xs; /* Inverse of TB to 2^20 0x40 */ + __u64 stamp_xsec; /* 0x48 */ + __u32 tb_update_count; /* Timebase atomicity ctr 0x50 */ + __u32 tz_minuteswest; /* Minutes west of Greenwich 0x58 */ + __u32 tz_dsttime; /* Type of dst correction 0x5C */ + __s32 wtom_clock_sec; /* Wall to monotonic clock */ + __s32 wtom_clock_nsec; + __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ + __u32 dcache_block_size; /* L1 d-cache block size */ + __u32 icache_block_size; /* L1 i-cache block size */ + __u32 dcache_log_block_size; /* L1 d-cache log block size */ + __u32 icache_log_block_size; /* L1 i-cache log block size */ +}; + +#endif /* CONFIG_PPC64 */ + +#ifdef __KERNEL__ +extern struct vdso_data *vdso_data; +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* _SYSTEMCFG_H */ diff --git a/arch/powerpc/include/asm/vga.h b/arch/powerpc/include/asm/vga.h new file mode 100644 index 000000000000..a2eac409c1ec --- /dev/null +++ b/arch/powerpc/include/asm/vga.h @@ -0,0 +1,53 @@ +#ifndef _ASM_POWERPC_VGA_H_ +#define _ASM_POWERPC_VGA_H_ + +#ifdef __KERNEL__ + +/* + * Access to VGA videoram + * + * (c) 1998 Martin Mares + */ + + +#include + + +#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE) + +#define VT_BUF_HAVE_RW +/* + * These are only needed for supporting VGA or MDA text mode, which use little + * endian byte ordering. + * In other cases, we can optimize by using native byte ordering and + * has already done the right job for us. + */ + +static inline void scr_writew(u16 val, volatile u16 *addr) +{ + st_le16(addr, val); +} + +static inline u16 scr_readw(volatile const u16 *addr) +{ + return ld_le16(addr); +} + +#define VT_BUF_HAVE_MEMCPYW +#define scr_memcpyw memcpy + +#endif /* !CONFIG_VGA_CONSOLE && !CONFIG_MDA_CONSOLE */ + +extern unsigned long vgacon_remap_base; + +#ifdef __powerpc64__ +#define VGA_MAP_MEM(x,s) ((unsigned long) ioremap((x), s)) +#else +#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base) +#endif + +#define vga_readb(x) (*(x)) +#define vga_writeb(x,y) (*(y) = (x)) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_VGA_H_ */ diff --git a/arch/powerpc/include/asm/vio.h b/arch/powerpc/include/asm/vio.h new file mode 100644 index 000000000000..0a290a195946 --- /dev/null +++ b/arch/powerpc/include/asm/vio.h @@ -0,0 +1,118 @@ +/* + * IBM PowerPC Virtual I/O Infrastructure Support. + * + * Copyright (c) 2003 IBM Corp. + * Dave Engebretsen engebret@us.ibm.com + * Santiago Leon santil@us.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_POWERPC_VIO_H +#define _ASM_POWERPC_VIO_H +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +#include +#include + +/* + * Architecture-specific constants for drivers to + * extract attributes of the device using vio_get_attribute() + */ +#define VETH_MAC_ADDR "local-mac-address" +#define VETH_MCAST_FILTER_SIZE "ibm,mac-address-filters" + +/* End architecture-specific constants */ + +#define h_vio_signal(ua, mode) \ + plpar_hcall_norets(H_VIO_SIGNAL, ua, mode) + +#define VIO_IRQ_DISABLE 0UL +#define VIO_IRQ_ENABLE 1UL + +/* + * VIO CMO minimum entitlement for all devices and spare entitlement + */ +#define VIO_CMO_MIN_ENT 1562624 + +struct iommu_table; + +/** + * vio_dev - This structure is used to describe virtual I/O devices. + * + * @desired: set from return of driver's get_desired_dma() function + * @entitled: bytes of IO data that has been reserved for this device. + * @allocated: bytes of IO data currently in use by the device. + * @allocs_failed: number of DMA failures due to insufficient entitlement. + */ +struct vio_dev { + const char *name; + const char *type; + uint32_t unit_address; + unsigned int irq; + struct { + size_t desired; + size_t entitled; + size_t allocated; + atomic_t allocs_failed; + } cmo; + struct device dev; +}; + +struct vio_driver { + const struct vio_device_id *id_table; + int (*probe)(struct vio_dev *dev, const struct vio_device_id *id); + int (*remove)(struct vio_dev *dev); + /* A driver must have a get_desired_dma() function to + * be loaded in a CMO environment if it uses DMA. + */ + unsigned long (*get_desired_dma)(struct vio_dev *dev); + struct device_driver driver; +}; + +extern int vio_register_driver(struct vio_driver *drv); +extern void vio_unregister_driver(struct vio_driver *drv); + +extern int vio_cmo_entitlement_update(size_t); +extern void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired); + +extern void __devinit vio_unregister_device(struct vio_dev *dev); + +struct device_node; + +extern struct vio_dev *vio_register_device_node( + struct device_node *node_vdev); +extern const void *vio_get_attribute(struct vio_dev *vdev, char *which, + int *length); +#ifdef CONFIG_PPC_PSERIES +extern struct vio_dev *vio_find_node(struct device_node *vnode); +extern int vio_enable_interrupts(struct vio_dev *dev); +extern int vio_disable_interrupts(struct vio_dev *dev); +#else +static inline int vio_enable_interrupts(struct vio_dev *dev) +{ + return 0; +} +#endif + +static inline struct vio_driver *to_vio_driver(struct device_driver *drv) +{ + return container_of(drv, struct vio_driver, driver); +} + +static inline struct vio_dev *to_vio_dev(struct device *dev) +{ + return container_of(dev, struct vio_dev, dev); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_VIO_H */ diff --git a/arch/powerpc/include/asm/xilinx_intc.h b/arch/powerpc/include/asm/xilinx_intc.h new file mode 100644 index 000000000000..343612f8fece --- /dev/null +++ b/arch/powerpc/include/asm/xilinx_intc.h @@ -0,0 +1,20 @@ +/* + * Xilinx intc external definitions + * + * Copyright 2007 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_POWERPC_XILINX_INTC_H +#define _ASM_POWERPC_XILINX_INTC_H + +#ifdef __KERNEL__ + +extern void __init xilinx_intc_init_tree(void); +extern unsigned int xilinx_intc_get_irq(void); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_XILINX_INTC_H */ diff --git a/arch/powerpc/include/asm/xmon.h b/arch/powerpc/include/asm/xmon.h new file mode 100644 index 000000000000..5eb8e599e5cc --- /dev/null +++ b/arch/powerpc/include/asm/xmon.h @@ -0,0 +1,33 @@ +#ifndef __ASM_POWERPC_XMON_H +#define __ASM_POWERPC_XMON_H + +/* + * Copyrignt (C) 2006 IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __KERNEL__ + +#include + +#ifdef CONFIG_XMON +extern void xmon_setup(void); +extern void xmon_register_spus(struct list_head *list); +struct pt_regs; +extern int xmon(struct pt_regs *excp); +extern irqreturn_t xmon_irq(int, void *); +#else +static inline void xmon_setup(void) { }; +static inline void xmon_register_spus(struct list_head *list) { }; +#endif + +#if defined(CONFIG_XMON) && defined(CONFIG_SMP) +extern int cpus_are_in_xmon(void); +#endif + +#endif /* __KERNEL __ */ +#endif /* __ASM_POWERPC_XMON_H */ diff --git a/arch/powerpc/include/asm/xor.h b/arch/powerpc/include/asm/xor.h new file mode 100644 index 000000000000..c82eb12a5b18 --- /dev/null +++ b/arch/powerpc/include/asm/xor.h @@ -0,0 +1 @@ +#include diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c index 409fcc7b63ce..be7dd422c0fa 100644 --- a/arch/powerpc/mm/tlb_64.c +++ b/arch/powerpc/mm/tlb_64.c @@ -34,7 +34,7 @@ DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); /* This is declared as we are using the more or less generic - * include/asm-powerpc/tlb.h file -- tgall + * arch/powerpc/include/asm/tlb.h file -- tgall */ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur); diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c index 835f2dc24dc9..014e26cda08d 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h index d9ce10915625..9790201718ae 100644 --- a/drivers/char/hvc_console.h +++ b/drivers/char/hvc_console.h @@ -6,7 +6,7 @@ * Ryan S. Arnold * * hvc_console header information: - * moved here from include/asm-powerpc/hvconsole.h + * moved here from arch/powerpc/include/asm/hvconsole.h * and drivers/char/hvc_console.c * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c index 786d518e9477..473d9b14439a 100644 --- a/drivers/char/hvcs.c +++ b/drivers/char/hvcs.c @@ -114,7 +114,7 @@ * the hvcs_final_close() function in order to get it out of the spinlock. * Rearranged hvcs_close(). Cleaned up some printks and did some housekeeping * on the changelog. Removed local CLC_LENGTH and used HVCS_CLC_LENGTH from - * include/asm-powerpc/hvcserver.h + * arch/powerepc/include/asm/hvcserver.h * * 1.3.2 -> 1.3.3 Replaced yield() in hvcs_close() with tty_wait_until_sent() to * prevent possible lockup with realtime scheduling as similarily pointed out by diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index dd9bc68f1c7b..898c8b5c38dd 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -42,7 +42,7 @@ */ -#include +#include #include "ehca_classes.h" #include "ehca_tools.h" #include "ehca_qes.h" diff --git a/include/asm-powerpc/8253pit.h b/include/asm-powerpc/8253pit.h deleted file mode 100644 index b70d6e53b303..000000000000 --- a/include/asm-powerpc/8253pit.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _ASM_POWERPC_8253PIT_H -#define _ASM_POWERPC_8253PIT_H - -/* - * 8253/8254 Programmable Interval Timer - */ - -#define PIT_TICK_RATE 1193182UL - -#endif /* _ASM_POWERPC_8253PIT_H */ diff --git a/include/asm-powerpc/8xx_immap.h b/include/asm-powerpc/8xx_immap.h deleted file mode 100644 index 4b0e15206006..000000000000 --- a/include/asm-powerpc/8xx_immap.h +++ /dev/null @@ -1,564 +0,0 @@ -/* - * MPC8xx Internal Memory Map - * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) - * - * The I/O on the MPC860 is comprised of blocks of special registers - * and the dual port ram for the Communication Processor Module. - * Within this space are functional units such as the SIU, memory - * controller, system timers, and other control functions. It is - * a combination that I found difficult to separate into logical - * functional files.....but anyone else is welcome to try. -- Dan - */ -#ifdef __KERNEL__ -#ifndef __IMMAP_8XX__ -#define __IMMAP_8XX__ - -/* System configuration registers. -*/ -typedef struct sys_conf { - uint sc_siumcr; - uint sc_sypcr; - uint sc_swt; - char res1[2]; - ushort sc_swsr; - uint sc_sipend; - uint sc_simask; - uint sc_siel; - uint sc_sivec; - uint sc_tesr; - char res2[0xc]; - uint sc_sdcr; - char res3[0x4c]; -} sysconf8xx_t; - -/* PCMCIA configuration registers. -*/ -typedef struct pcmcia_conf { - uint pcmc_pbr0; - uint pcmc_por0; - uint pcmc_pbr1; - uint pcmc_por1; - uint pcmc_pbr2; - uint pcmc_por2; - uint pcmc_pbr3; - uint pcmc_por3; - uint pcmc_pbr4; - uint pcmc_por4; - uint pcmc_pbr5; - uint pcmc_por5; - uint pcmc_pbr6; - uint pcmc_por6; - uint pcmc_pbr7; - uint pcmc_por7; - char res1[0x20]; - uint pcmc_pgcra; - uint pcmc_pgcrb; - uint pcmc_pscr; - char res2[4]; - uint pcmc_pipr; - char res3[4]; - uint pcmc_per; - char res4[4]; -} pcmconf8xx_t; - -/* Memory controller registers. -*/ -typedef struct mem_ctlr { - uint memc_br0; - uint memc_or0; - uint memc_br1; - uint memc_or1; - uint memc_br2; - uint memc_or2; - uint memc_br3; - uint memc_or3; - uint memc_br4; - uint memc_or4; - uint memc_br5; - uint memc_or5; - uint memc_br6; - uint memc_or6; - uint memc_br7; - uint memc_or7; - char res1[0x24]; - uint memc_mar; - uint memc_mcr; - char res2[4]; - uint memc_mamr; - uint memc_mbmr; - ushort memc_mstat; - ushort memc_mptpr; - uint memc_mdr; - char res3[0x80]; -} memctl8xx_t; - -/*----------------------------------------------------------------------- - * BR - Memory Controler: Base Register 16-9 - */ -#define BR_BA_MSK 0xffff8000 /* Base Address Mask */ -#define BR_AT_MSK 0x00007000 /* Address Type Mask */ -#define BR_PS_MSK 0x00000c00 /* Port Size Mask */ -#define BR_PS_32 0x00000000 /* 32 bit port size */ -#define BR_PS_16 0x00000800 /* 16 bit port size */ -#define BR_PS_8 0x00000400 /* 8 bit port size */ -#define BR_PARE 0x00000200 /* Parity Enable */ -#define BR_WP 0x00000100 /* Write Protect */ -#define BR_MS_MSK 0x000000c0 /* Machine Select Mask */ -#define BR_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */ -#define BR_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */ -#define BR_MS_UPMB 0x000000c0 /* U.P.M.B Machine Select */ -#define BR_V 0x00000001 /* Bank Valid */ - -/*----------------------------------------------------------------------- - * OR - Memory Controler: Option Register 16-11 - */ -#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */ -#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */ -#define OR_CSNT_SAM 0x00000800 /* Chip Select Negation Time/ Start */ - /* Address Multiplex */ -#define OR_ACS_MSK 0x00000600 /* Address to Chip Select Setup mask */ -#define OR_ACS_DIV1 0x00000000 /* CS is output at the same time */ -#define OR_ACS_DIV4 0x00000400 /* CS is output 1/4 a clock later */ -#define OR_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later */ -#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */ -#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/ -#define OR_BI 0x00000100 /* Burst inhibit */ -#define OR_SCY_MSK 0x000000f0 /* Cycle Length in Clocks */ -#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */ -#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */ -#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */ -#define OR_SCY_3_CLK 0x00000030 /* 3 clock cycles wait states */ -#define OR_SCY_4_CLK 0x00000040 /* 4 clock cycles wait states */ -#define OR_SCY_5_CLK 0x00000050 /* 5 clock cycles wait states */ -#define OR_SCY_6_CLK 0x00000060 /* 6 clock cycles wait states */ -#define OR_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */ -#define OR_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */ -#define OR_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */ -#define OR_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */ -#define OR_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */ -#define OR_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */ -#define OR_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */ -#define OR_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */ -#define OR_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */ -#define OR_SETA 0x00000008 /* External Transfer Acknowledge */ -#define OR_TRLX 0x00000004 /* Timing Relaxed */ -#define OR_EHTR 0x00000002 /* Extended Hold Time on Read */ - -/* System Integration Timers. -*/ -typedef struct sys_int_timers { - ushort sit_tbscr; - char res0[0x02]; - uint sit_tbreff0; - uint sit_tbreff1; - char res1[0x14]; - ushort sit_rtcsc; - char res2[0x02]; - uint sit_rtc; - uint sit_rtsec; - uint sit_rtcal; - char res3[0x10]; - ushort sit_piscr; - char res4[2]; - uint sit_pitc; - uint sit_pitr; - char res5[0x34]; -} sit8xx_t; - -#define TBSCR_TBIRQ_MASK ((ushort)0xff00) -#define TBSCR_REFA ((ushort)0x0080) -#define TBSCR_REFB ((ushort)0x0040) -#define TBSCR_REFAE ((ushort)0x0008) -#define TBSCR_REFBE ((ushort)0x0004) -#define TBSCR_TBF ((ushort)0x0002) -#define TBSCR_TBE ((ushort)0x0001) - -#define RTCSC_RTCIRQ_MASK ((ushort)0xff00) -#define RTCSC_SEC ((ushort)0x0080) -#define RTCSC_ALR ((ushort)0x0040) -#define RTCSC_38K ((ushort)0x0010) -#define RTCSC_SIE ((ushort)0x0008) -#define RTCSC_ALE ((ushort)0x0004) -#define RTCSC_RTF ((ushort)0x0002) -#define RTCSC_RTE ((ushort)0x0001) - -#define PISCR_PIRQ_MASK ((ushort)0xff00) -#define PISCR_PS ((ushort)0x0080) -#define PISCR_PIE ((ushort)0x0004) -#define PISCR_PTF ((ushort)0x0002) -#define PISCR_PTE ((ushort)0x0001) - -/* Clocks and Reset. -*/ -typedef struct clk_and_reset { - uint car_sccr; - uint car_plprcr; - uint car_rsr; - char res[0x74]; /* Reserved area */ -} car8xx_t; - -/* System Integration Timers keys. -*/ -typedef struct sitk { - uint sitk_tbscrk; - uint sitk_tbreff0k; - uint sitk_tbreff1k; - uint sitk_tbk; - char res1[0x10]; - uint sitk_rtcsck; - uint sitk_rtck; - uint sitk_rtseck; - uint sitk_rtcalk; - char res2[0x10]; - uint sitk_piscrk; - uint sitk_pitck; - char res3[0x38]; -} sitk8xx_t; - -/* Clocks and reset keys. -*/ -typedef struct cark { - uint cark_sccrk; - uint cark_plprcrk; - uint cark_rsrk; - char res[0x474]; -} cark8xx_t; - -/* The key to unlock registers maintained by keep-alive power. -*/ -#define KAPWR_KEY ((unsigned int)0x55ccaa33) - -/* Video interface. MPC823 Only. -*/ -typedef struct vid823 { - ushort vid_vccr; - ushort res1; - u_char vid_vsr; - u_char res2; - u_char vid_vcmr; - u_char res3; - uint vid_vbcb; - uint res4; - uint vid_vfcr0; - uint vid_vfaa0; - uint vid_vfba0; - uint vid_vfcr1; - uint vid_vfaa1; - uint vid_vfba1; - u_char res5[0x18]; -} vid823_t; - -/* LCD interface. 823 Only. -*/ -typedef struct lcd { - uint lcd_lccr; - uint lcd_lchcr; - uint lcd_lcvcr; - char res1[4]; - uint lcd_lcfaa; - uint lcd_lcfba; - char lcd_lcsr; - char res2[0x7]; -} lcd823_t; - -/* I2C -*/ -typedef struct i2c { - u_char i2c_i2mod; - char res1[3]; - u_char i2c_i2add; - char res2[3]; - u_char i2c_i2brg; - char res3[3]; - u_char i2c_i2com; - char res4[3]; - u_char i2c_i2cer; - char res5[3]; - u_char i2c_i2cmr; - char res6[0x8b]; -} i2c8xx_t; - -/* DMA control/status registers. -*/ -typedef struct sdma_csr { - char res1[4]; - uint sdma_sdar; - u_char sdma_sdsr; - char res3[3]; - u_char sdma_sdmr; - char res4[3]; - u_char sdma_idsr1; - char res5[3]; - u_char sdma_idmr1; - char res6[3]; - u_char sdma_idsr2; - char res7[3]; - u_char sdma_idmr2; - char res8[0x13]; -} sdma8xx_t; - -/* Communication Processor Module Interrupt Controller. -*/ -typedef struct cpm_ic { - ushort cpic_civr; - char res[0xe]; - uint cpic_cicr; - uint cpic_cipr; - uint cpic_cimr; - uint cpic_cisr; -} cpic8xx_t; - -/* Input/Output Port control/status registers. -*/ -typedef struct io_port { - ushort iop_padir; - ushort iop_papar; - ushort iop_paodr; - ushort iop_padat; - char res1[8]; - ushort iop_pcdir; - ushort iop_pcpar; - ushort iop_pcso; - ushort iop_pcdat; - ushort iop_pcint; - char res2[6]; - ushort iop_pddir; - ushort iop_pdpar; - char res3[2]; - ushort iop_pddat; - uint utmode; - char res4[4]; -} iop8xx_t; - -/* Communication Processor Module Timers -*/ -typedef struct cpm_timers { - ushort cpmt_tgcr; - char res1[0xe]; - ushort cpmt_tmr1; - ushort cpmt_tmr2; - ushort cpmt_trr1; - ushort cpmt_trr2; - ushort cpmt_tcr1; - ushort cpmt_tcr2; - ushort cpmt_tcn1; - ushort cpmt_tcn2; - ushort cpmt_tmr3; - ushort cpmt_tmr4; - ushort cpmt_trr3; - ushort cpmt_trr4; - ushort cpmt_tcr3; - ushort cpmt_tcr4; - ushort cpmt_tcn3; - ushort cpmt_tcn4; - ushort cpmt_ter1; - ushort cpmt_ter2; - ushort cpmt_ter3; - ushort cpmt_ter4; - char res2[8]; -} cpmtimer8xx_t; - -/* Finally, the Communication Processor stuff..... -*/ -typedef struct scc { /* Serial communication channels */ - uint scc_gsmrl; - uint scc_gsmrh; - ushort scc_psmr; - char res1[2]; - ushort scc_todr; - ushort scc_dsr; - ushort scc_scce; - char res2[2]; - ushort scc_sccm; - char res3; - u_char scc_sccs; - char res4[8]; -} scc_t; - -typedef struct smc { /* Serial management channels */ - char res1[2]; - ushort smc_smcmr; - char res2[2]; - u_char smc_smce; - char res3[3]; - u_char smc_smcm; - char res4[5]; -} smc_t; - -/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but - * it fits within the address space. - */ - -typedef struct fec { - uint fec_addr_low; /* lower 32 bits of station address */ - ushort fec_addr_high; /* upper 16 bits of station address */ - ushort res1; /* reserved */ - uint fec_hash_table_high; /* upper 32-bits of hash table */ - uint fec_hash_table_low; /* lower 32-bits of hash table */ - uint fec_r_des_start; /* beginning of Rx descriptor ring */ - uint fec_x_des_start; /* beginning of Tx descriptor ring */ - uint fec_r_buff_size; /* Rx buffer size */ - uint res2[9]; /* reserved */ - uint fec_ecntrl; /* ethernet control register */ - uint fec_ievent; /* interrupt event register */ - uint fec_imask; /* interrupt mask register */ - uint fec_ivec; /* interrupt level and vector status */ - uint fec_r_des_active; /* Rx ring updated flag */ - uint fec_x_des_active; /* Tx ring updated flag */ - uint res3[10]; /* reserved */ - uint fec_mii_data; /* MII data register */ - uint fec_mii_speed; /* MII speed control register */ - uint res4[17]; /* reserved */ - uint fec_r_bound; /* end of RAM (read-only) */ - uint fec_r_fstart; /* Rx FIFO start address */ - uint res5[6]; /* reserved */ - uint fec_x_fstart; /* Tx FIFO start address */ - uint res6[17]; /* reserved */ - uint fec_fun_code; /* fec SDMA function code */ - uint res7[3]; /* reserved */ - uint fec_r_cntrl; /* Rx control register */ - uint fec_r_hash; /* Rx hash register */ - uint res8[14]; /* reserved */ - uint fec_x_cntrl; /* Tx control register */ - uint res9[0x1e]; /* reserved */ -} fec_t; - -/* The FEC and LCD color map share the same address space.... - * I guess we will never see an 823T :-). - */ -union fec_lcd { - fec_t fl_un_fec; - u_char fl_un_cmap[0x200]; -}; - -typedef struct comm_proc { - /* General control and status registers. - */ - ushort cp_cpcr; - u_char res1[2]; - ushort cp_rccr; - u_char res2; - u_char cp_rmds; - u_char res3[4]; - ushort cp_cpmcr1; - ushort cp_cpmcr2; - ushort cp_cpmcr3; - ushort cp_cpmcr4; - u_char res4[2]; - ushort cp_rter; - u_char res5[2]; - ushort cp_rtmr; - u_char res6[0x14]; - - /* Baud rate generators. - */ - uint cp_brgc1; - uint cp_brgc2; - uint cp_brgc3; - uint cp_brgc4; - - /* Serial Communication Channels. - */ - scc_t cp_scc[4]; - - /* Serial Management Channels. - */ - smc_t cp_smc[2]; - - /* Serial Peripheral Interface. - */ - ushort cp_spmode; - u_char res7[4]; - u_char cp_spie; - u_char res8[3]; - u_char cp_spim; - u_char res9[2]; - u_char cp_spcom; - u_char res10[2]; - - /* Parallel Interface Port. - */ - u_char res11[2]; - ushort cp_pipc; - u_char res12[2]; - ushort cp_ptpr; - uint cp_pbdir; - uint cp_pbpar; - u_char res13[2]; - ushort cp_pbodr; - uint cp_pbdat; - - /* Port E - MPC87x/88x only. - */ - uint cp_pedir; - uint cp_pepar; - uint cp_peso; - uint cp_peodr; - uint cp_pedat; - - /* Communications Processor Timing Register - - Contains RMII Timing for the FECs on MPC87x/88x only. - */ - uint cp_cptr; - - /* Serial Interface and Time Slot Assignment. - */ - uint cp_simode; - u_char cp_sigmr; - u_char res15; - u_char cp_sistr; - u_char cp_sicmr; - u_char res16[4]; - uint cp_sicr; - uint cp_sirp; - u_char res17[0xc]; - - /* 256 bytes of MPC823 video controller RAM array. - */ - u_char cp_vcram[0x100]; - u_char cp_siram[0x200]; - - /* The fast ethernet controller is not really part of the CPM, - * but it resides in the address space. - * The LCD color map is also here. - */ - union fec_lcd fl_un; -#define cp_fec fl_un.fl_un_fec -#define lcd_cmap fl_un.fl_un_cmap - char res18[0xE00]; - - /* The DUET family has a second FEC here */ - fec_t cp_fec2; -#define cp_fec1 cp_fec /* consistency macro */ - - /* Dual Ported RAM follows. - * There are many different formats for this memory area - * depending upon the devices used and options chosen. - * Some processors don't have all of it populated. - */ - u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */ - u_char cp_dparam[0x400]; /* Parameter RAM */ -} cpm8xx_t; - -/* Internal memory map. -*/ -typedef struct immap { - sysconf8xx_t im_siu_conf; /* SIU Configuration */ - pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */ - memctl8xx_t im_memctl; /* Memory Controller */ - sit8xx_t im_sit; /* System integration timers */ - car8xx_t im_clkrst; /* Clocks and reset */ - sitk8xx_t im_sitk; /* Sys int timer keys */ - cark8xx_t im_clkrstk; /* Clocks and reset keys */ - vid823_t im_vid; /* Video (823 only) */ - lcd823_t im_lcd; /* LCD (823 only) */ - i2c8xx_t im_i2c; /* I2C control/status */ - sdma8xx_t im_sdma; /* SDMA control/status */ - cpic8xx_t im_cpic; /* CPM Interrupt Controller */ - iop8xx_t im_ioport; /* IO Port control/status */ - cpmtimer8xx_t im_cpmtimer; /* CPM timers */ - cpm8xx_t im_cpm; /* Communication processor */ -} immap_t; - -#endif /* __IMMAP_8XX__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild deleted file mode 100644 index 5ab7d7fe198c..000000000000 --- a/include/asm-powerpc/Kbuild +++ /dev/null @@ -1,37 +0,0 @@ -include include/asm-generic/Kbuild.asm - -header-y += auxvec.h -header-y += ioctls.h -header-y += sembuf.h -header-y += siginfo.h -header-y += stat.h -header-y += errno.h -header-y += ipcbuf.h -header-y += msgbuf.h -header-y += shmbuf.h -header-y += socket.h -header-y += termbits.h -header-y += fcntl.h -header-y += poll.h -header-y += sockios.h -header-y += ucontext.h -header-y += ioctl.h -header-y += linkage.h -header-y += resource.h -header-y += sigcontext.h -header-y += statfs.h -header-y += ps3fb.h - -unifdef-y += bootx.h -unifdef-y += byteorder.h -unifdef-y += cputable.h -unifdef-y += elf.h -unifdef-y += nvram.h -unifdef-y += param.h -unifdef-y += posix_types.h -unifdef-y += seccomp.h -unifdef-y += signal.h -unifdef-y += spu_info.h -unifdef-y += termios.h -unifdef-y += types.h -unifdef-y += unistd.h diff --git a/include/asm-powerpc/a.out.h b/include/asm-powerpc/a.out.h deleted file mode 100644 index 89cead6b176e..000000000000 --- a/include/asm-powerpc/a.out.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_POWERPC_A_OUT_H -#define _ASM_POWERPC_A_OUT_H - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#endif /* _ASM_POWERPC_A_OUT_H */ diff --git a/include/asm-powerpc/abs_addr.h b/include/asm-powerpc/abs_addr.h deleted file mode 100644 index 98324c5a8286..000000000000 --- a/include/asm-powerpc/abs_addr.h +++ /dev/null @@ -1,75 +0,0 @@ -#ifndef _ASM_POWERPC_ABS_ADDR_H -#define _ASM_POWERPC_ABS_ADDR_H -#ifdef __KERNEL__ - - -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include - -#include -#include -#include -#include - -struct mschunks_map { - unsigned long num_chunks; - unsigned long chunk_size; - unsigned long chunk_shift; - unsigned long chunk_mask; - u32 *mapping; -}; - -extern struct mschunks_map mschunks_map; - -/* Chunks are 256 KB */ -#define MSCHUNKS_CHUNK_SHIFT (18) -#define MSCHUNKS_CHUNK_SIZE (1UL << MSCHUNKS_CHUNK_SHIFT) -#define MSCHUNKS_OFFSET_MASK (MSCHUNKS_CHUNK_SIZE - 1) - -static inline unsigned long chunk_to_addr(unsigned long chunk) -{ - return chunk << MSCHUNKS_CHUNK_SHIFT; -} - -static inline unsigned long addr_to_chunk(unsigned long addr) -{ - return addr >> MSCHUNKS_CHUNK_SHIFT; -} - -static inline unsigned long phys_to_abs(unsigned long pa) -{ - unsigned long chunk; - - /* This is a no-op on non-iSeries */ - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return pa; - - chunk = addr_to_chunk(pa); - - if (chunk < mschunks_map.num_chunks) - chunk = mschunks_map.mapping[chunk]; - - return chunk_to_addr(chunk) + (pa & MSCHUNKS_OFFSET_MASK); -} - -/* Convenience macros */ -#define virt_to_abs(va) phys_to_abs(__pa(va)) -#define abs_to_virt(aa) __va(aa) - -/* - * Converts Virtual Address to Real Address for - * Legacy iSeries Hypervisor calls - */ -#define iseries_hv_addr(virtaddr) \ - (0x8000000000000000 | virt_to_abs(virtaddr)) - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_ABS_ADDR_H */ diff --git a/include/asm-powerpc/agp.h b/include/asm-powerpc/agp.h deleted file mode 100644 index 86455c4c31ee..000000000000 --- a/include/asm-powerpc/agp.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _ASM_POWERPC_AGP_H -#define _ASM_POWERPC_AGP_H -#ifdef __KERNEL__ - -#include - -#define map_page_into_agp(page) -#define unmap_page_from_agp(page) -#define flush_agp_cache() mb() - -/* Convert a physical address to an address suitable for the GART. */ -#define phys_to_gart(x) (x) -#define gart_to_phys(x) (x) - -/* GATT allocation. Returns/accepts GATT kernel virtual address. */ -#define alloc_gatt_pages(order) \ - ((char *)__get_free_pages(GFP_KERNEL, (order))) -#define free_gatt_pages(table, order) \ - free_pages((unsigned long)(table), (order)) - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_AGP_H */ diff --git a/include/asm-powerpc/asm-compat.h b/include/asm-powerpc/asm-compat.h deleted file mode 100644 index 8f0fe7971949..000000000000 --- a/include/asm-powerpc/asm-compat.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef _ASM_POWERPC_ASM_COMPAT_H -#define _ASM_POWERPC_ASM_COMPAT_H - -#include - -#ifdef __ASSEMBLY__ -# define stringify_in_c(...) __VA_ARGS__ -# define ASM_CONST(x) x -#else -/* This version of stringify will deal with commas... */ -# define __stringify_in_c(...) #__VA_ARGS__ -# define stringify_in_c(...) __stringify_in_c(__VA_ARGS__) " " -# define __ASM_CONST(x) x##UL -# define ASM_CONST(x) __ASM_CONST(x) -#endif - - -#ifdef __powerpc64__ - -/* operations for longs and pointers */ -#define PPC_LL stringify_in_c(ld) -#define PPC_STL stringify_in_c(std) -#define PPC_LCMPI stringify_in_c(cmpdi) -#define PPC_LONG stringify_in_c(.llong) -#define PPC_LONG_ALIGN stringify_in_c(.balign 8) -#define PPC_TLNEI stringify_in_c(tdnei) -#define PPC_LLARX stringify_in_c(ldarx) -#define PPC_STLCX stringify_in_c(stdcx.) -#define PPC_CNTLZL stringify_in_c(cntlzd) - -/* Move to CR, single-entry optimized version. Only available - * on POWER4 and later. - */ -#ifdef CONFIG_POWER4_ONLY -#define PPC_MTOCRF stringify_in_c(mtocrf) -#else -#define PPC_MTOCRF stringify_in_c(mtcrf) -#endif - -#else /* 32-bit */ - -/* operations for longs and pointers */ -#define PPC_LL stringify_in_c(lwz) -#define PPC_STL stringify_in_c(stw) -#define PPC_LCMPI stringify_in_c(cmpwi) -#define PPC_LONG stringify_in_c(.long) -#define PPC_LONG_ALIGN stringify_in_c(.balign 4) -#define PPC_TLNEI stringify_in_c(twnei) -#define PPC_LLARX stringify_in_c(lwarx) -#define PPC_STLCX stringify_in_c(stwcx.) -#define PPC_CNTLZL stringify_in_c(cntlzw) -#define PPC_MTOCRF stringify_in_c(mtcrf) - -#endif - -#ifdef __KERNEL__ -#ifdef CONFIG_IBM405_ERR77 -/* Erratum #77 on the 405 means we need a sync or dcbt before every - * stwcx. The old ATOMIC_SYNC_FIX covered some but not all of this. - */ -#define PPC405_ERR77(ra,rb) stringify_in_c(dcbt ra, rb;) -#define PPC405_ERR77_SYNC stringify_in_c(sync;) -#else -#define PPC405_ERR77(ra,rb) -#define PPC405_ERR77_SYNC -#endif -#endif - -#endif /* _ASM_POWERPC_ASM_COMPAT_H */ diff --git a/include/asm-powerpc/atomic.h b/include/asm-powerpc/atomic.h deleted file mode 100644 index f3fc733758f5..000000000000 --- a/include/asm-powerpc/atomic.h +++ /dev/null @@ -1,479 +0,0 @@ -#ifndef _ASM_POWERPC_ATOMIC_H_ -#define _ASM_POWERPC_ATOMIC_H_ - -/* - * PowerPC atomic operations - */ - -typedef struct { int counter; } atomic_t; - -#ifdef __KERNEL__ -#include -#include -#include -#include - -#define ATOMIC_INIT(i) { (i) } - -static __inline__ int atomic_read(const atomic_t *v) -{ - int t; - - __asm__ __volatile__("lwz%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter)); - - return t; -} - -static __inline__ void atomic_set(atomic_t *v, int i) -{ - __asm__ __volatile__("stw%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i)); -} - -static __inline__ void atomic_add(int a, atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%3 # atomic_add\n\ - add %0,%2,%0\n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (a), "r" (&v->counter) - : "cc"); -} - -static __inline__ int atomic_add_return(int a, atomic_t *v) -{ - int t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: lwarx %0,0,%2 # atomic_add_return\n\ - add %0,%1,%0\n" - PPC405_ERR77(0,%2) -" stwcx. %0,0,%2 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (a), "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) - -static __inline__ void atomic_sub(int a, atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%3 # atomic_sub\n\ - subf %0,%2,%0\n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (a), "r" (&v->counter) - : "cc"); -} - -static __inline__ int atomic_sub_return(int a, atomic_t *v) -{ - int t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: lwarx %0,0,%2 # atomic_sub_return\n\ - subf %0,%1,%0\n" - PPC405_ERR77(0,%2) -" stwcx. %0,0,%2 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (a), "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -static __inline__ void atomic_inc(atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%2 # atomic_inc\n\ - addic %0,%0,1\n" - PPC405_ERR77(0,%2) -" stwcx. %0,0,%2 \n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (&v->counter) - : "cc"); -} - -static __inline__ int atomic_inc_return(atomic_t *v) -{ - int t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: lwarx %0,0,%1 # atomic_inc_return\n\ - addic %0,%0,1\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -/* - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) - -static __inline__ void atomic_dec(atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%2 # atomic_dec\n\ - addic %0,%0,-1\n" - PPC405_ERR77(0,%2)\ -" stwcx. %0,0,%2\n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (&v->counter) - : "cc"); -} - -static __inline__ int atomic_dec_return(atomic_t *v) -{ - int t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: lwarx %0,0,%1 # atomic_dec_return\n\ - addic %0,%0,-1\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1\n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -/** - * atomic_add_unless - add unless the number is a given value - * @v: pointer of type atomic_t - * @a: the amount to add to v... - * @u: ...unless v is equal to u. - * - * Atomically adds @a to @v, so long as it was not @u. - * Returns non-zero if @v was not @u, and zero otherwise. - */ -static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) -{ - int t; - - __asm__ __volatile__ ( - LWSYNC_ON_SMP -"1: lwarx %0,0,%1 # atomic_add_unless\n\ - cmpw 0,%0,%3 \n\ - beq- 2f \n\ - add %0,%2,%0 \n" - PPC405_ERR77(0,%2) -" stwcx. %0,0,%1 \n\ - bne- 1b \n" - ISYNC_ON_SMP -" subf %0,%2,%0 \n\ -2:" - : "=&r" (t) - : "r" (&v->counter), "r" (a), "r" (u) - : "cc", "memory"); - - return t != u; -} - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -#define atomic_sub_and_test(a, v) (atomic_sub_return((a), (v)) == 0) -#define atomic_dec_and_test(v) (atomic_dec_return((v)) == 0) - -/* - * Atomically test *v and decrement if it is greater than 0. - * The function returns the old value of *v minus 1, even if - * the atomic variable, v, was not decremented. - */ -static __inline__ int atomic_dec_if_positive(atomic_t *v) -{ - int t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: lwarx %0,0,%1 # atomic_dec_if_positive\n\ - cmpwi %0,1\n\ - addi %0,%0,-1\n\ - blt- 2f\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1\n\ - bne- 1b" - ISYNC_ON_SMP - "\n\ -2:" : "=&b" (t) - : "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -#define smp_mb__before_atomic_dec() smp_mb() -#define smp_mb__after_atomic_dec() smp_mb() -#define smp_mb__before_atomic_inc() smp_mb() -#define smp_mb__after_atomic_inc() smp_mb() - -#ifdef __powerpc64__ - -typedef struct { long counter; } atomic64_t; - -#define ATOMIC64_INIT(i) { (i) } - -static __inline__ long atomic64_read(const atomic64_t *v) -{ - long t; - - __asm__ __volatile__("ld%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter)); - - return t; -} - -static __inline__ void atomic64_set(atomic64_t *v, long i) -{ - __asm__ __volatile__("std%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i)); -} - -static __inline__ void atomic64_add(long a, atomic64_t *v) -{ - long t; - - __asm__ __volatile__( -"1: ldarx %0,0,%3 # atomic64_add\n\ - add %0,%2,%0\n\ - stdcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (a), "r" (&v->counter) - : "cc"); -} - -static __inline__ long atomic64_add_return(long a, atomic64_t *v) -{ - long t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: ldarx %0,0,%2 # atomic64_add_return\n\ - add %0,%1,%0\n\ - stdcx. %0,0,%2 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (a), "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0) - -static __inline__ void atomic64_sub(long a, atomic64_t *v) -{ - long t; - - __asm__ __volatile__( -"1: ldarx %0,0,%3 # atomic64_sub\n\ - subf %0,%2,%0\n\ - stdcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (a), "r" (&v->counter) - : "cc"); -} - -static __inline__ long atomic64_sub_return(long a, atomic64_t *v) -{ - long t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: ldarx %0,0,%2 # atomic64_sub_return\n\ - subf %0,%1,%0\n\ - stdcx. %0,0,%2 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (a), "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -static __inline__ void atomic64_inc(atomic64_t *v) -{ - long t; - - __asm__ __volatile__( -"1: ldarx %0,0,%2 # atomic64_inc\n\ - addic %0,%0,1\n\ - stdcx. %0,0,%2 \n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (&v->counter) - : "cc"); -} - -static __inline__ long atomic64_inc_return(atomic64_t *v) -{ - long t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: ldarx %0,0,%1 # atomic64_inc_return\n\ - addic %0,%0,1\n\ - stdcx. %0,0,%1 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -/* - * atomic64_inc_and_test - increment and test - * @v: pointer of type atomic64_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0) - -static __inline__ void atomic64_dec(atomic64_t *v) -{ - long t; - - __asm__ __volatile__( -"1: ldarx %0,0,%2 # atomic64_dec\n\ - addic %0,%0,-1\n\ - stdcx. %0,0,%2\n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (&v->counter) - : "cc"); -} - -static __inline__ long atomic64_dec_return(atomic64_t *v) -{ - long t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: ldarx %0,0,%1 # atomic64_dec_return\n\ - addic %0,%0,-1\n\ - stdcx. %0,0,%1\n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -#define atomic64_sub_and_test(a, v) (atomic64_sub_return((a), (v)) == 0) -#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) - -/* - * Atomically test *v and decrement if it is greater than 0. - * The function returns the old value of *v minus 1. - */ -static __inline__ long atomic64_dec_if_positive(atomic64_t *v) -{ - long t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: ldarx %0,0,%1 # atomic64_dec_if_positive\n\ - addic. %0,%0,-1\n\ - blt- 2f\n\ - stdcx. %0,0,%1\n\ - bne- 1b" - ISYNC_ON_SMP - "\n\ -2:" : "=&r" (t) - : "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -#define atomic64_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) -#define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) - -/** - * atomic64_add_unless - add unless the number is a given value - * @v: pointer of type atomic64_t - * @a: the amount to add to v... - * @u: ...unless v is equal to u. - * - * Atomically adds @a to @v, so long as it was not @u. - * Returns non-zero if @v was not @u, and zero otherwise. - */ -static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) -{ - long t; - - __asm__ __volatile__ ( - LWSYNC_ON_SMP -"1: ldarx %0,0,%1 # atomic_add_unless\n\ - cmpd 0,%0,%3 \n\ - beq- 2f \n\ - add %0,%2,%0 \n" -" stdcx. %0,0,%1 \n\ - bne- 1b \n" - ISYNC_ON_SMP -" subf %0,%2,%0 \n\ -2:" - : "=&r" (t) - : "r" (&v->counter), "r" (a), "r" (u) - : "cc", "memory"); - - return t != u; -} - -#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) - -#endif /* __powerpc64__ */ - -#include -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_ATOMIC_H_ */ diff --git a/include/asm-powerpc/auxvec.h b/include/asm-powerpc/auxvec.h deleted file mode 100644 index 19a099b62cd6..000000000000 --- a/include/asm-powerpc/auxvec.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_POWERPC_AUXVEC_H -#define _ASM_POWERPC_AUXVEC_H - -/* - * We need to put in some extra aux table entries to tell glibc what - * the cache block size is, so it can use the dcbz instruction safely. - */ -#define AT_DCACHEBSIZE 19 -#define AT_ICACHEBSIZE 20 -#define AT_UCACHEBSIZE 21 -/* A special ignored type value for PPC, for glibc compatibility. */ -#define AT_IGNOREPPC 22 - -/* The vDSO location. We have to use the same value as x86 for glibc's - * sake :-) - */ -#define AT_SYSINFO_EHDR 33 - -#endif diff --git a/include/asm-powerpc/backlight.h b/include/asm-powerpc/backlight.h deleted file mode 100644 index 8cf5c37c3817..000000000000 --- a/include/asm-powerpc/backlight.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Routines for handling backlight control on PowerBooks - * - * For now, implementation resides in - * arch/powerpc/platforms/powermac/backlight.c - * - */ -#ifndef __ASM_POWERPC_BACKLIGHT_H -#define __ASM_POWERPC_BACKLIGHT_H -#ifdef __KERNEL__ - -#include -#include - -/* For locking instructions, see the implementation file */ -extern struct backlight_device *pmac_backlight; -extern struct mutex pmac_backlight_mutex; - -extern int pmac_backlight_curve_lookup(struct fb_info *info, int value); - -extern int pmac_has_backlight_type(const char *type); - -extern void pmac_backlight_key(int direction); -static inline void pmac_backlight_key_up(void) -{ - pmac_backlight_key(0); -} -static inline void pmac_backlight_key_down(void) -{ - pmac_backlight_key(1); -} - -extern void pmac_backlight_set_legacy_brightness_pmu(int brightness); -extern int pmac_backlight_set_legacy_brightness(int brightness); -extern int pmac_backlight_get_legacy_brightness(void); - -extern void pmac_backlight_enable(void); -extern void pmac_backlight_disable(void); - -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-powerpc/bitops.h b/include/asm-powerpc/bitops.h deleted file mode 100644 index 897eade3afbe..000000000000 --- a/include/asm-powerpc/bitops.h +++ /dev/null @@ -1,410 +0,0 @@ -/* - * PowerPC atomic bit operations. - * - * Merged version by David Gibson . - * Based on ppc64 versions by: Dave Engebretsen, Todd Inglett, Don - * Reed, Pat McCarthy, Peter Bergner, Anton Blanchard. They - * originally took it from the ppc32 code. - * - * Within a word, bits are numbered LSB first. Lot's of places make - * this assumption by directly testing bits with (val & (1< 1 word) bitmaps on a - * big-endian system because, unlike little endian, the number of each - * bit depends on the word size. - * - * The bitop functions are defined to work on unsigned longs, so for a - * ppc64 system the bits end up numbered: - * |63..............0|127............64|191...........128|255...........196| - * and on ppc32: - * |31.....0|63....31|95....64|127...96|159..128|191..160|223..192|255..224| - * - * There are a few little-endian macros used mostly for filesystem - * bitmaps, these work on similar bit arrays layouts, but - * byte-oriented: - * |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56| - * - * The main difference is that bit 3-5 (64b) or 3-4 (32b) in the bit - * number field needs to be reversed compared to the big-endian bit - * fields. This can be achieved by XOR with 0x38 (64b) or 0x18 (32b). - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_POWERPC_BITOPS_H -#define _ASM_POWERPC_BITOPS_H - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include -#include -#include - -/* - * clear_bit doesn't imply a memory barrier - */ -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() - -#define BITOP_MASK(nr) (1UL << ((nr) % BITS_PER_LONG)) -#define BITOP_WORD(nr) ((nr) / BITS_PER_LONG) -#define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7) - -static __inline__ void set_bit(int nr, volatile unsigned long *addr) -{ - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # set_bit\n" - "or %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc" ); -} - -static __inline__ void clear_bit(int nr, volatile unsigned long *addr) -{ - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # clear_bit\n" - "andc %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc" ); -} - -static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr) -{ - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # clear_bit_unlock\n" - "andc %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc", "memory"); -} - -static __inline__ void change_bit(int nr, volatile unsigned long *addr) -{ - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # change_bit\n" - "xor %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc" ); -} - -static __inline__ int test_and_set_bit(unsigned long nr, - volatile unsigned long *addr) -{ - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # test_and_set_bit\n" - "or %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -static __inline__ int test_and_set_bit_lock(unsigned long nr, - volatile unsigned long *addr) -{ - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # test_and_set_bit_lock\n" - "or %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -static __inline__ int test_and_clear_bit(unsigned long nr, - volatile unsigned long *addr) -{ - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # test_and_clear_bit\n" - "andc %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -static __inline__ int test_and_change_bit(unsigned long nr, - volatile unsigned long *addr) -{ - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # test_and_change_bit\n" - "xor %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -static __inline__ void set_bits(unsigned long mask, unsigned long *addr) -{ - unsigned long old; - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # set_bits\n" - "or %0,%0,%2\n" - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*addr) - : "r" (mask), "r" (addr) - : "cc"); -} - -#include - -static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr) -{ - __asm__ __volatile__(LWSYNC_ON_SMP "" ::: "memory"); - __clear_bit(nr, addr); -} - -/* - * Return the zero-based bit position (LE, not IBM bit numbering) of - * the most significant 1-bit in a double word. - */ -static __inline__ __attribute__((const)) -int __ilog2(unsigned long x) -{ - int lz; - - asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (x)); - return BITS_PER_LONG - 1 - lz; -} - -static inline __attribute__((const)) -int __ilog2_u32(u32 n) -{ - int bit; - asm ("cntlzw %0,%1" : "=r" (bit) : "r" (n)); - return 31 - bit; -} - -#ifdef __powerpc64__ -static inline __attribute__((const)) -int __ilog2_u64(u64 n) -{ - int bit; - asm ("cntlzd %0,%1" : "=r" (bit) : "r" (n)); - return 63 - bit; -} -#endif - -/* - * Determines the bit position of the least significant 0 bit in the - * specified double word. The returned bit position will be - * zero-based, starting from the right side (63/31 - 0). - */ -static __inline__ unsigned long ffz(unsigned long x) -{ - /* no zero exists anywhere in the 8 byte area. */ - if ((x = ~x) == 0) - return BITS_PER_LONG; - - /* - * Calculate the bit position of the least signficant '1' bit in x - * (since x has been changed this will actually be the least signficant - * '0' bit in * the original x). Note: (x & -x) gives us a mask that - * is the least significant * (RIGHT-most) 1-bit of the value in x. - */ - return __ilog2(x & -x); -} - -static __inline__ int __ffs(unsigned long x) -{ - return __ilog2(x & -x); -} - -/* - * ffs: find first bit set. This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ -static __inline__ int ffs(int x) -{ - unsigned long i = (unsigned long)x; - return __ilog2(i & -i) + 1; -} - -/* - * fls: find last (most-significant) bit set. - * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. - */ -static __inline__ int fls(unsigned int x) -{ - int lz; - - asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x)); - return 32 - lz; -} - -static __inline__ unsigned long __fls(unsigned long x) -{ - return __ilog2(x); -} - -/* - * 64-bit can do this using one cntlzd (count leading zeroes doubleword) - * instruction; for 32-bit we use the generic version, which does two - * 32-bit fls calls. - */ -#ifdef __powerpc64__ -static __inline__ int fls64(__u64 x) -{ - int lz; - - asm ("cntlzd %0,%1" : "=r" (lz) : "r" (x)); - return 64 - lz; -} -#else -#include -#endif /* __powerpc64__ */ - -#include -#include - -/* Little-endian versions */ - -static __inline__ int test_le_bit(unsigned long nr, - __const__ unsigned long *addr) -{ - __const__ unsigned char *tmp = (__const__ unsigned char *) addr; - return (tmp[nr >> 3] >> (nr & 7)) & 1; -} - -#define __set_le_bit(nr, addr) \ - __set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) -#define __clear_le_bit(nr, addr) \ - __clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) - -#define test_and_set_le_bit(nr, addr) \ - test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) -#define test_and_clear_le_bit(nr, addr) \ - test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) - -#define __test_and_set_le_bit(nr, addr) \ - __test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) -#define __test_and_clear_le_bit(nr, addr) \ - __test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) - -#define find_first_zero_le_bit(addr, size) generic_find_next_zero_le_bit((addr), (size), 0) -unsigned long generic_find_next_zero_le_bit(const unsigned long *addr, - unsigned long size, unsigned long offset); - -unsigned long generic_find_next_le_bit(const unsigned long *addr, - unsigned long size, unsigned long offset); -/* Bitmap functions for the ext2 filesystem */ - -#define ext2_set_bit(nr,addr) \ - __test_and_set_le_bit((nr), (unsigned long*)addr) -#define ext2_clear_bit(nr, addr) \ - __test_and_clear_le_bit((nr), (unsigned long*)addr) - -#define ext2_set_bit_atomic(lock, nr, addr) \ - test_and_set_le_bit((nr), (unsigned long*)addr) -#define ext2_clear_bit_atomic(lock, nr, addr) \ - test_and_clear_le_bit((nr), (unsigned long*)addr) - -#define ext2_test_bit(nr, addr) test_le_bit((nr),(unsigned long*)addr) - -#define ext2_find_first_zero_bit(addr, size) \ - find_first_zero_le_bit((unsigned long*)addr, size) -#define ext2_find_next_zero_bit(addr, size, off) \ - generic_find_next_zero_le_bit((unsigned long*)addr, size, off) - -#define ext2_find_next_bit(addr, size, off) \ - generic_find_next_le_bit((unsigned long *)addr, size, off) -/* Bitmap functions for the minix filesystem. */ - -#define minix_test_and_set_bit(nr,addr) \ - __test_and_set_le_bit(nr, (unsigned long *)addr) -#define minix_set_bit(nr,addr) \ - __set_le_bit(nr, (unsigned long *)addr) -#define minix_test_and_clear_bit(nr,addr) \ - __test_and_clear_le_bit(nr, (unsigned long *)addr) -#define minix_test_bit(nr,addr) \ - test_le_bit(nr, (unsigned long *)addr) - -#define minix_find_first_zero_bit(addr,size) \ - find_first_zero_le_bit((unsigned long *)addr, size) - -#include - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_BITOPS_H */ diff --git a/include/asm-powerpc/bootx.h b/include/asm-powerpc/bootx.h deleted file mode 100644 index 57b82e3f89ce..000000000000 --- a/include/asm-powerpc/bootx.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * This file describes the structure passed from the BootX application - * (for MacOS) when it is used to boot Linux. - * - * Written by Benjamin Herrenschmidt. - */ - - -#ifndef __ASM_BOOTX_H__ -#define __ASM_BOOTX_H__ - -#include - -#ifdef macintosh -#include -#include "linux_type_defs.h" -#endif - -#ifdef macintosh -/* All this requires PowerPC alignment */ -#pragma options align=power -#endif - -/* On kernel entry: - * - * r3 = 0x426f6f58 ('BooX') - * r4 = pointer to boot_infos - * r5 = NULL - * - * Data and instruction translation disabled, interrupts - * disabled, kernel loaded at physical 0x00000000 on PCI - * machines (will be different on NuBus). - */ - -#define BOOT_INFO_VERSION 5 -#define BOOT_INFO_COMPATIBLE_VERSION 1 - -/* Bit in the architecture flag mask. More to be defined in - future versions. Note that either BOOT_ARCH_PCI or - BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are - set additionally when BOOT_ARCH_NUBUS is set. - */ -#define BOOT_ARCH_PCI 0x00000001UL -#define BOOT_ARCH_NUBUS 0x00000002UL -#define BOOT_ARCH_NUBUS_PDM 0x00000010UL -#define BOOT_ARCH_NUBUS_PERFORMA 0x00000020UL -#define BOOT_ARCH_NUBUS_POWERBOOK 0x00000040UL - -/* Maximum number of ranges in phys memory map */ -#define MAX_MEM_MAP_SIZE 26 - -/* This is the format of an element in the physical memory map. Note that - the map is optional and current BootX will only build it for pre-PCI - machines */ -typedef struct boot_info_map_entry -{ - __u32 physAddr; /* Physical starting address */ - __u32 size; /* Size in bytes */ -} boot_info_map_entry_t; - - -/* Here are the boot informations that are passed to the bootstrap - * Note that the kernel arguments and the device tree are appended - * at the end of this structure. */ -typedef struct boot_infos -{ - /* Version of this structure */ - __u32 version; - /* backward compatible down to version: */ - __u32 compatible_version; - - /* NEW (vers. 2) this holds the current _logical_ base addr of - the frame buffer (for use by early boot message) */ - __u8* logicalDisplayBase; - - /* NEW (vers. 4) Apple's machine identification */ - __u32 machineID; - - /* NEW (vers. 4) Detected hw architecture */ - __u32 architecture; - - /* The device tree (internal addresses relative to the beginning of the tree, - * device tree offset relative to the beginning of this structure). - * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this - * field is 0. - */ - __u32 deviceTreeOffset; /* Device tree offset */ - __u32 deviceTreeSize; /* Size of the device tree */ - - /* Some infos about the current MacOS display */ - __u32 dispDeviceRect[4]; /* left,top,right,bottom */ - __u32 dispDeviceDepth; /* (8, 16 or 32) */ - __u8* dispDeviceBase; /* base address (physical) */ - __u32 dispDeviceRowBytes; /* rowbytes (in bytes) */ - __u32 dispDeviceColorsOffset; /* Colormap (8 bits only) or 0 (*) */ - /* Optional offset in the registry to the current - * MacOS display. (Can be 0 when not detected) */ - __u32 dispDeviceRegEntryOffset; - - /* Optional pointer to boot ramdisk (offset from this structure) */ - __u32 ramDisk; - __u32 ramDiskSize; /* size of ramdisk image */ - - /* Kernel command line arguments (offset from this structure) */ - __u32 kernelParamsOffset; - - /* ALL BELOW NEW (vers. 4) */ - - /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag - (non-PCI) only. On PCI, memory is contiguous and it's size is in the - device-tree. */ - boot_info_map_entry_t - physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */ - __u32 physMemoryMapSize; /* How many entries in map */ - - - /* The framebuffer size (optional, currently 0) */ - __u32 frameBufferSize; /* Represents a max size, can be 0. */ - - /* NEW (vers. 5) */ - - /* Total params size (args + colormap + device tree + ramdisk) */ - __u32 totalParamsSize; - -} boot_infos_t; - -#ifdef __KERNEL__ -/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index - * is represented by 3 short words containing a 16 bits (unsigned) color - * component. Later versions may contain the gamma table for direct-color - * devices here. - */ -#define BOOTX_COLORTABLE_SIZE (256UL*3UL*2UL) - -/* BootX passes the device-tree using a format that comes from earlier - * ppc32 kernels. This used to match what is in prom.h, but not anymore - * so we now define it here - */ -struct bootx_dt_prop { - u32 name; - int length; - u32 value; - u32 next; -}; - -struct bootx_dt_node { - u32 unused0; - u32 unused1; - u32 phandle; /* not really available */ - u32 unused2; - u32 unused3; - u32 unused4; - u32 unused5; - u32 full_name; - u32 properties; - u32 parent; - u32 child; - u32 sibling; - u32 next; - u32 allnext; -}; - -extern void bootx_init(unsigned long r4, unsigned long phys); - -#endif /* __KERNEL__ */ - -#ifdef macintosh -#pragma options align=reset -#endif - -#endif diff --git a/include/asm-powerpc/btext.h b/include/asm-powerpc/btext.h deleted file mode 100644 index 906f46e31006..000000000000 --- a/include/asm-powerpc/btext.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Definitions for using the procedures in btext.c. - * - * Benjamin Herrenschmidt - */ -#ifndef __PPC_BTEXT_H -#define __PPC_BTEXT_H -#ifdef __KERNEL__ - -extern int btext_find_display(int allow_nonstdout); -extern void btext_update_display(unsigned long phys, int width, int height, - int depth, int pitch); -extern void btext_setup_display(int width, int height, int depth, int pitch, - unsigned long address); -extern void btext_prepare_BAT(void); -extern void btext_unmap(void); - -extern void btext_drawchar(char c); -extern void btext_drawstring(const char *str); -extern void btext_drawhex(unsigned long v); -extern void btext_drawtext(const char *c, unsigned int len); - -extern void btext_clearscreen(void); -extern void btext_flushscreen(void); -extern void btext_flushline(void); - -#endif /* __KERNEL__ */ -#endif /* __PPC_BTEXT_H */ diff --git a/include/asm-powerpc/bug.h b/include/asm-powerpc/bug.h deleted file mode 100644 index e55d1f66b86f..000000000000 --- a/include/asm-powerpc/bug.h +++ /dev/null @@ -1,121 +0,0 @@ -#ifndef _ASM_POWERPC_BUG_H -#define _ASM_POWERPC_BUG_H -#ifdef __KERNEL__ - -#include -/* - * Define an illegal instr to trap on the bug. - * We don't use 0 because that marks the end of a function - * in the ELF ABI. That's "Boo Boo" in case you wonder... - */ -#define BUG_OPCODE .long 0x00b00b00 /* For asm */ -#define BUG_ILLEGAL_INSTR "0x00b00b00" /* For BUG macro */ - -#ifdef CONFIG_BUG - -#ifdef __ASSEMBLY__ -#ifdef CONFIG_DEBUG_BUGVERBOSE -.macro EMIT_BUG_ENTRY addr,file,line,flags - .section __bug_table,"a" -5001: PPC_LONG \addr, 5002f - .short \line, \flags - .org 5001b+BUG_ENTRY_SIZE - .previous - .section .rodata,"a" -5002: .asciz "\file" - .previous -.endm -#else - .macro EMIT_BUG_ENTRY addr,file,line,flags - .section __bug_table,"a" -5001: PPC_LONG \addr - .short \flags - .org 5001b+BUG_ENTRY_SIZE - .previous -.endm -#endif /* verbose */ - -#else /* !__ASSEMBLY__ */ -/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and - sizeof(struct bug_entry), respectively */ -#ifdef CONFIG_DEBUG_BUGVERBOSE -#define _EMIT_BUG_ENTRY \ - ".section __bug_table,\"a\"\n" \ - "2:\t" PPC_LONG "1b, %0\n" \ - "\t.short %1, %2\n" \ - ".org 2b+%3\n" \ - ".previous\n" -#else -#define _EMIT_BUG_ENTRY \ - ".section __bug_table,\"a\"\n" \ - "2:\t" PPC_LONG "1b\n" \ - "\t.short %2\n" \ - ".org 2b+%3\n" \ - ".previous\n" -#endif - -/* - * BUG_ON() and WARN_ON() do their best to cooperate with compile-time - * optimisations. However depending on the complexity of the condition - * some compiler versions may not produce optimal results. - */ - -#define BUG() do { \ - __asm__ __volatile__( \ - "1: twi 31,0,0\n" \ - _EMIT_BUG_ENTRY \ - : : "i" (__FILE__), "i" (__LINE__), \ - "i" (0), "i" (sizeof(struct bug_entry))); \ - for(;;) ; \ -} while (0) - -#define BUG_ON(x) do { \ - if (__builtin_constant_p(x)) { \ - if (x) \ - BUG(); \ - } else { \ - __asm__ __volatile__( \ - "1: "PPC_TLNEI" %4,0\n" \ - _EMIT_BUG_ENTRY \ - : : "i" (__FILE__), "i" (__LINE__), "i" (0), \ - "i" (sizeof(struct bug_entry)), \ - "r" ((__force long)(x))); \ - } \ -} while (0) - -#define __WARN() do { \ - __asm__ __volatile__( \ - "1: twi 31,0,0\n" \ - _EMIT_BUG_ENTRY \ - : : "i" (__FILE__), "i" (__LINE__), \ - "i" (BUGFLAG_WARNING), \ - "i" (sizeof(struct bug_entry))); \ -} while (0) - -#define WARN_ON(x) ({ \ - int __ret_warn_on = !!(x); \ - if (__builtin_constant_p(__ret_warn_on)) { \ - if (__ret_warn_on) \ - __WARN(); \ - } else { \ - __asm__ __volatile__( \ - "1: "PPC_TLNEI" %4,0\n" \ - _EMIT_BUG_ENTRY \ - : : "i" (__FILE__), "i" (__LINE__), \ - "i" (BUGFLAG_WARNING), \ - "i" (sizeof(struct bug_entry)), \ - "r" (__ret_warn_on)); \ - } \ - unlikely(__ret_warn_on); \ -}) - -#define HAVE_ARCH_BUG -#define HAVE_ARCH_BUG_ON -#define HAVE_ARCH_WARN_ON -#endif /* __ASSEMBLY __ */ -#endif /* CONFIG_BUG */ - -#include - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_BUG_H */ diff --git a/include/asm-powerpc/bugs.h b/include/asm-powerpc/bugs.h deleted file mode 100644 index 42fdb73e3068..000000000000 --- a/include/asm-powerpc/bugs.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _ASM_POWERPC_BUGS_H -#define _ASM_POWERPC_BUGS_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* - * This file is included by 'init/main.c' to check for - * architecture-dependent bugs. - */ - -static inline void check_bugs(void) { } - -#endif /* _ASM_POWERPC_BUGS_H */ diff --git a/include/asm-powerpc/byteorder.h b/include/asm-powerpc/byteorder.h deleted file mode 100644 index b37752214a16..000000000000 --- a/include/asm-powerpc/byteorder.h +++ /dev/null @@ -1,89 +0,0 @@ -#ifndef _ASM_POWERPC_BYTEORDER_H -#define _ASM_POWERPC_BYTEORDER_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include - -#ifdef __GNUC__ -#ifdef __KERNEL__ - -static __inline__ __u16 ld_le16(const volatile __u16 *addr) -{ - __u16 val; - - __asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr)); - return val; -} - -static __inline__ void st_le16(volatile __u16 *addr, const __u16 val) -{ - __asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr)); -} - -static __inline__ __u32 ld_le32(const volatile __u32 *addr) -{ - __u32 val; - - __asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr)); - return val; -} - -static __inline__ void st_le32(volatile __u32 *addr, const __u32 val) -{ - __asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr)); -} - -static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value) -{ - __u16 result; - - __asm__("rlwimi %0,%1,8,16,23" - : "=r" (result) - : "r" (value), "0" (value >> 8)); - return result; -} - -static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value) -{ - __u32 result; - - __asm__("rlwimi %0,%1,24,16,23\n\t" - "rlwimi %0,%1,8,8,15\n\t" - "rlwimi %0,%1,24,0,7" - : "=r" (result) - : "r" (value), "0" (value >> 24)); - return result; -} - -#define __arch__swab16(x) ___arch__swab16(x) -#define __arch__swab32(x) ___arch__swab32(x) - -/* The same, but returns converted value from the location pointer by addr. */ -#define __arch__swab16p(addr) ld_le16(addr) -#define __arch__swab32p(addr) ld_le32(addr) - -/* The same, but do the conversion in situ, ie. put the value back to addr. */ -#define __arch__swab16s(addr) st_le16(addr,*addr) -#define __arch__swab32s(addr) st_le32(addr,*addr) - -#endif /* __KERNEL__ */ - -#ifndef __STRICT_ANSI__ -#define __BYTEORDER_HAS_U64__ -#ifndef __powerpc64__ -#define __SWAB_64_THRU_32__ -#endif /* __powerpc64__ */ -#endif /* __STRICT_ANSI__ */ - -#endif /* __GNUC__ */ - -#include - -#endif /* _ASM_POWERPC_BYTEORDER_H */ diff --git a/include/asm-powerpc/cache.h b/include/asm-powerpc/cache.h deleted file mode 100644 index 81de6eb3455d..000000000000 --- a/include/asm-powerpc/cache.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifndef _ASM_POWERPC_CACHE_H -#define _ASM_POWERPC_CACHE_H - -#ifdef __KERNEL__ - - -/* bytes per L1 cache line */ -#if defined(CONFIG_8xx) || defined(CONFIG_403GCX) -#define L1_CACHE_SHIFT 4 -#define MAX_COPY_PREFETCH 1 -#elif defined(CONFIG_PPC_E500MC) -#define L1_CACHE_SHIFT 6 -#define MAX_COPY_PREFETCH 4 -#elif defined(CONFIG_PPC32) -#define L1_CACHE_SHIFT 5 -#define MAX_COPY_PREFETCH 4 -#else /* CONFIG_PPC64 */ -#define L1_CACHE_SHIFT 7 -#endif - -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -#define SMP_CACHE_BYTES L1_CACHE_BYTES - -#if defined(__powerpc64__) && !defined(__ASSEMBLY__) -struct ppc64_caches { - u32 dsize; /* L1 d-cache size */ - u32 dline_size; /* L1 d-cache line size */ - u32 log_dline_size; - u32 dlines_per_page; - u32 isize; /* L1 i-cache size */ - u32 iline_size; /* L1 i-cache line size */ - u32 log_iline_size; - u32 ilines_per_page; -}; - -extern struct ppc64_caches ppc64_caches; -#endif /* __powerpc64__ && ! __ASSEMBLY__ */ - -#if !defined(__ASSEMBLY__) -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_CACHE_H */ diff --git a/include/asm-powerpc/cacheflush.h b/include/asm-powerpc/cacheflush.h deleted file mode 100644 index ba667a383b8c..000000000000 --- a/include/asm-powerpc/cacheflush.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_POWERPC_CACHEFLUSH_H -#define _ASM_POWERPC_CACHEFLUSH_H - -#ifdef __KERNEL__ - -#include -#include - -/* - * No cache flushing is required when address mappings are changed, - * because the caches on PowerPCs are physically addressed. - */ -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_icache_page(vma, page) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -extern void flush_dcache_page(struct page *page); -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -extern void __flush_icache_range(unsigned long, unsigned long); -static inline void flush_icache_range(unsigned long start, unsigned long stop) -{ - if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) - __flush_icache_range(start, stop); -} - -extern void flush_icache_user_range(struct vm_area_struct *vma, - struct page *page, unsigned long addr, - int len); -extern void __flush_dcache_icache(void *page_va); -extern void flush_dcache_icache_page(struct page *page); -#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE) -extern void __flush_dcache_icache_phys(unsigned long physaddr); -#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */ - -extern void flush_dcache_range(unsigned long start, unsigned long stop); -#ifdef CONFIG_PPC32 -extern void clean_dcache_range(unsigned long start, unsigned long stop); -extern void invalidate_dcache_range(unsigned long start, unsigned long stop); -#endif /* CONFIG_PPC32 */ -#ifdef CONFIG_PPC64 -extern void flush_inval_dcache_range(unsigned long start, unsigned long stop); -extern void flush_dcache_phys_range(unsigned long start, unsigned long stop); -#endif - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - memcpy(dst, src, len); \ - flush_icache_user_range(vma, page, vaddr, len); \ - } while (0) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - - - -#ifdef CONFIG_DEBUG_PAGEALLOC -/* internal debugging function */ -void kernel_map_pages(struct page *page, int numpages, int enable); -#endif - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_CACHEFLUSH_H */ diff --git a/include/asm-powerpc/cell-pmu.h b/include/asm-powerpc/cell-pmu.h deleted file mode 100644 index 8066eede3a0c..000000000000 --- a/include/asm-powerpc/cell-pmu.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Cell Broadband Engine Performance Monitor - * - * (C) Copyright IBM Corporation 2006 - * - * Author: - * David Erb (djerb@us.ibm.com) - * Kevin Corry (kevcorry@us.ibm.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_CELL_PMU_H__ -#define __ASM_CELL_PMU_H__ - -/* The Cell PMU has four hardware performance counters, which can be - * configured as four 32-bit counters or eight 16-bit counters. - */ -#define NR_PHYS_CTRS 4 -#define NR_CTRS (NR_PHYS_CTRS * 2) - -/* Macros for the pm_control register. */ -#define CBE_PM_16BIT_CTR(ctr) (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1)))) -#define CBE_PM_ENABLE_PERF_MON 0x80000000 -#define CBE_PM_STOP_AT_MAX 0x40000000 -#define CBE_PM_TRACE_MODE_GET(pm_control) (((pm_control) >> 28) & 0x3) -#define CBE_PM_TRACE_MODE_SET(mode) (((mode) & 0x3) << 28) -#define CBE_PM_COUNT_MODE_SET(count) (((count) & 0x3) << 18) -#define CBE_PM_FREEZE_ALL_CTRS 0x00100000 -#define CBE_PM_ENABLE_EXT_TRACE 0x00008000 - -/* Macros for the trace_address register. */ -#define CBE_PM_TRACE_BUF_FULL 0x00000800 -#define CBE_PM_TRACE_BUF_EMPTY 0x00000400 -#define CBE_PM_TRACE_BUF_DATA_COUNT(ta) ((ta) & 0x3ff) -#define CBE_PM_TRACE_BUF_MAX_COUNT 0x400 - -/* Macros for the pm07_control registers. */ -#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f) -#define CBE_PM_CTR_INPUT_CONTROL 0x02000000 -#define CBE_PM_CTR_POLARITY 0x01000000 -#define CBE_PM_CTR_COUNT_CYCLES 0x00800000 -#define CBE_PM_CTR_ENABLE 0x00400000 -#define PM07_CTR_INPUT_MUX(x) (((x) & 0x3F) << 26) -#define PM07_CTR_INPUT_CONTROL(x) (((x) & 1) << 25) -#define PM07_CTR_POLARITY(x) (((x) & 1) << 24) -#define PM07_CTR_COUNT_CYCLES(x) (((x) & 1) << 23) -#define PM07_CTR_ENABLE(x) (((x) & 1) << 22) - -/* Macros for the pm_status register. */ -#define CBE_PM_CTR_OVERFLOW_INTR(ctr) (1 << (31 - ((ctr) & 7))) - -enum pm_reg_name { - group_control, - debug_bus_control, - trace_address, - ext_tr_timer, - pm_status, - pm_control, - pm_interval, - pm_start_stop, -}; - -/* Routines for reading/writing the PMU registers. */ -extern u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr); -extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val); -extern u32 cbe_read_ctr(u32 cpu, u32 ctr); -extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val); - -extern u32 cbe_read_pm07_control(u32 cpu, u32 ctr); -extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val); -extern u32 cbe_read_pm(u32 cpu, enum pm_reg_name reg); -extern void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val); - -extern u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr); -extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size); - -extern void cbe_enable_pm(u32 cpu); -extern void cbe_disable_pm(u32 cpu); - -extern void cbe_read_trace_buffer(u32 cpu, u64 *buf); - -extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); -extern void cbe_disable_pm_interrupts(u32 cpu); -extern u32 cbe_get_and_clear_pm_interrupts(u32 cpu); -extern void cbe_sync_irq(int node); - -#define CBE_COUNT_SUPERVISOR_MODE 0 -#define CBE_COUNT_HYPERVISOR_MODE 1 -#define CBE_COUNT_PROBLEM_MODE 2 -#define CBE_COUNT_ALL_MODES 3 - -#endif /* __ASM_CELL_PMU_H__ */ diff --git a/include/asm-powerpc/cell-regs.h b/include/asm-powerpc/cell-regs.h deleted file mode 100644 index fd6fd00434ef..000000000000 --- a/include/asm-powerpc/cell-regs.h +++ /dev/null @@ -1,315 +0,0 @@ -/* - * cbe_regs.h - * - * This file is intended to hold the various register definitions for CBE - * on-chip system devices (memory controller, IO controller, etc...) - * - * (C) Copyright IBM Corporation 2001,2006 - * - * Authors: Maximino Aguilar (maguilar@us.ibm.com) - * David J. Erb (djerb@us.ibm.com) - * - * (c) 2006 Benjamin Herrenschmidt , IBM Corp. - */ - -#ifndef CBE_REGS_H -#define CBE_REGS_H - -#include - -/* - * - * Some HID register definitions - * - */ - -/* CBE specific HID0 bits */ -#define HID0_CBE_THERM_WAKEUP 0x0000020000000000ul -#define HID0_CBE_SYSERR_WAKEUP 0x0000008000000000ul -#define HID0_CBE_THERM_INT_EN 0x0000000400000000ul -#define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul - -#define MAX_CBE 2 - -/* - * - * Pervasive unit register definitions - * - */ - -union spe_reg { - u64 val; - u8 spe[8]; -}; - -union ppe_spe_reg { - u64 val; - struct { - u32 ppe; - u32 spe; - }; -}; - - -struct cbe_pmd_regs { - /* Debug Bus Control */ - u64 pad_0x0000; /* 0x0000 */ - - u64 group_control; /* 0x0008 */ - - u8 pad_0x0010_0x00a8 [0x00a8 - 0x0010]; /* 0x0010 */ - - u64 debug_bus_control; /* 0x00a8 */ - - u8 pad_0x00b0_0x0100 [0x0100 - 0x00b0]; /* 0x00b0 */ - - u64 trace_aux_data; /* 0x0100 */ - u64 trace_buffer_0_63; /* 0x0108 */ - u64 trace_buffer_64_127; /* 0x0110 */ - u64 trace_address; /* 0x0118 */ - u64 ext_tr_timer; /* 0x0120 */ - - u8 pad_0x0128_0x0400 [0x0400 - 0x0128]; /* 0x0128 */ - - /* Performance Monitor */ - u64 pm_status; /* 0x0400 */ - u64 pm_control; /* 0x0408 */ - u64 pm_interval; /* 0x0410 */ - u64 pm_ctr[4]; /* 0x0418 */ - u64 pm_start_stop; /* 0x0438 */ - u64 pm07_control[8]; /* 0x0440 */ - - u8 pad_0x0480_0x0800 [0x0800 - 0x0480]; /* 0x0480 */ - - /* Thermal Sensor Registers */ - union spe_reg ts_ctsr1; /* 0x0800 */ - u64 ts_ctsr2; /* 0x0808 */ - union spe_reg ts_mtsr1; /* 0x0810 */ - u64 ts_mtsr2; /* 0x0818 */ - union spe_reg ts_itr1; /* 0x0820 */ - u64 ts_itr2; /* 0x0828 */ - u64 ts_gitr; /* 0x0830 */ - u64 ts_isr; /* 0x0838 */ - u64 ts_imr; /* 0x0840 */ - union spe_reg tm_cr1; /* 0x0848 */ - u64 tm_cr2; /* 0x0850 */ - u64 tm_simr; /* 0x0858 */ - union ppe_spe_reg tm_tpr; /* 0x0860 */ - union spe_reg tm_str1; /* 0x0868 */ - u64 tm_str2; /* 0x0870 */ - union ppe_spe_reg tm_tsr; /* 0x0878 */ - - /* Power Management */ - u64 pmcr; /* 0x0880 */ -#define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000 - u64 pmsr; /* 0x0888 */ - - /* Time Base Register */ - u64 tbr; /* 0x0890 */ - - u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */ - - /* Fault Isolation Registers */ - u64 checkstop_fir; /* 0x0c00 */ - u64 recoverable_fir; /* 0x0c08 */ - u64 spec_att_mchk_fir; /* 0x0c10 */ - u32 fir_mode_reg; /* 0x0c18 */ - u8 pad_0x0c1c_0x0c20 [4]; /* 0x0c1c */ -#define CBE_PMD_FIR_MODE_M8 0x00800 - u64 fir_enable_mask; /* 0x0c20 */ - - u8 pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28]; /* 0x0c28 */ - u64 ras_esc_0; /* 0x0ca8 */ - u8 pad_0x0cb0_0x1000 [0x1000 - 0x0cb0]; /* 0x0cb0 */ -}; - -extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np); -extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu); - -/* - * PMU shadow registers - * - * Many of the registers in the performance monitoring unit are write-only, - * so we need to save a copy of what we write to those registers. - * - * The actual data counters are read/write. However, writing to the counters - * only takes effect if the PMU is enabled. Otherwise the value is stored in - * a hardware latch until the next time the PMU is enabled. So we save a copy - * of the counter values if we need to read them back while the PMU is - * disabled. The counter_value_in_latch field is a bitmap indicating which - * counters currently have a value waiting to be written. - */ - -struct cbe_pmd_shadow_regs { - u32 group_control; - u32 debug_bus_control; - u32 trace_address; - u32 ext_tr_timer; - u32 pm_status; - u32 pm_control; - u32 pm_interval; - u32 pm_start_stop; - u32 pm07_control[NR_CTRS]; - - u32 pm_ctr[NR_PHYS_CTRS]; - u32 counter_value_in_latch; -}; - -extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np); -extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu); - -/* - * - * IIC unit register definitions - * - */ - -struct cbe_iic_pending_bits { - u32 data; - u8 flags; - u8 class; - u8 source; - u8 prio; -}; - -#define CBE_IIC_IRQ_VALID 0x80 -#define CBE_IIC_IRQ_IPI 0x40 - -struct cbe_iic_thread_regs { - struct cbe_iic_pending_bits pending; - struct cbe_iic_pending_bits pending_destr; - u64 generate; - u64 prio; -}; - -struct cbe_iic_regs { - u8 pad_0x0000_0x0400[0x0400 - 0x0000]; /* 0x0000 */ - - /* IIC interrupt registers */ - struct cbe_iic_thread_regs thread[2]; /* 0x0400 */ - - u64 iic_ir; /* 0x0440 */ -#define CBE_IIC_IR_PRIO(x) (((x) & 0xf) << 12) -#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4) -#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf) -#define CBE_IIC_IR_IOC_0 0x0 -#define CBE_IIC_IR_IOC_1S 0xb -#define CBE_IIC_IR_PT_0 0xe -#define CBE_IIC_IR_PT_1 0xf - - u64 iic_is; /* 0x0448 */ -#define CBE_IIC_IS_PMI 0x2 - - u8 pad_0x0450_0x0500[0x0500 - 0x0450]; /* 0x0450 */ - - /* IOC FIR */ - u64 ioc_fir_reset; /* 0x0500 */ - u64 ioc_fir_set; /* 0x0508 */ - u64 ioc_checkstop_enable; /* 0x0510 */ - u64 ioc_fir_error_mask; /* 0x0518 */ - u64 ioc_syserr_enable; /* 0x0520 */ - u64 ioc_fir; /* 0x0528 */ - - u8 pad_0x0530_0x1000[0x1000 - 0x0530]; /* 0x0530 */ -}; - -extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np); -extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu); - - -struct cbe_mic_tm_regs { - u8 pad_0x0000_0x0040[0x0040 - 0x0000]; /* 0x0000 */ - - u64 mic_ctl_cnfg2; /* 0x0040 */ -#define CBE_MIC_ENABLE_AUX_TRC 0x8000000000000000LL -#define CBE_MIC_DISABLE_PWR_SAV_2 0x0200000000000000LL -#define CBE_MIC_DISABLE_AUX_TRC_WRAP 0x0100000000000000LL -#define CBE_MIC_ENABLE_AUX_TRC_INT 0x0080000000000000LL - - u64 pad_0x0048; /* 0x0048 */ - - u64 mic_aux_trc_base; /* 0x0050 */ - u64 mic_aux_trc_max_addr; /* 0x0058 */ - u64 mic_aux_trc_cur_addr; /* 0x0060 */ - u64 mic_aux_trc_grf_addr; /* 0x0068 */ - u64 mic_aux_trc_grf_data; /* 0x0070 */ - - u64 pad_0x0078; /* 0x0078 */ - - u64 mic_ctl_cnfg_0; /* 0x0080 */ -#define CBE_MIC_DISABLE_PWR_SAV_0 0x8000000000000000LL - - u64 pad_0x0088; /* 0x0088 */ - - u64 slow_fast_timer_0; /* 0x0090 */ - u64 slow_next_timer_0; /* 0x0098 */ - - u8 pad_0x00a0_0x00f8[0x00f8 - 0x00a0]; /* 0x00a0 */ - u64 mic_df_ecc_address_0; /* 0x00f8 */ - - u8 pad_0x0100_0x01b8[0x01b8 - 0x0100]; /* 0x0100 */ - u64 mic_df_ecc_address_1; /* 0x01b8 */ - - u64 mic_ctl_cnfg_1; /* 0x01c0 */ -#define CBE_MIC_DISABLE_PWR_SAV_1 0x8000000000000000LL - - u64 pad_0x01c8; /* 0x01c8 */ - - u64 slow_fast_timer_1; /* 0x01d0 */ - u64 slow_next_timer_1; /* 0x01d8 */ - - u8 pad_0x01e0_0x0208[0x0208 - 0x01e0]; /* 0x01e0 */ - u64 mic_exc; /* 0x0208 */ -#define CBE_MIC_EXC_BLOCK_SCRUB 0x0800000000000000ULL -#define CBE_MIC_EXC_FAST_SCRUB 0x0100000000000000ULL - - u64 mic_mnt_cfg; /* 0x0210 */ -#define CBE_MIC_MNT_CFG_CHAN_0_POP 0x0002000000000000ULL -#define CBE_MIC_MNT_CFG_CHAN_1_POP 0x0004000000000000ULL - - u64 mic_df_config; /* 0x0218 */ -#define CBE_MIC_ECC_DISABLE_0 0x4000000000000000ULL -#define CBE_MIC_ECC_REP_SINGLE_0 0x2000000000000000ULL -#define CBE_MIC_ECC_DISABLE_1 0x0080000000000000ULL -#define CBE_MIC_ECC_REP_SINGLE_1 0x0040000000000000ULL - - u8 pad_0x0220_0x0230[0x0230 - 0x0220]; /* 0x0220 */ - u64 mic_fir; /* 0x0230 */ -#define CBE_MIC_FIR_ECC_SINGLE_0_ERR 0x0200000000000000ULL -#define CBE_MIC_FIR_ECC_MULTI_0_ERR 0x0100000000000000ULL -#define CBE_MIC_FIR_ECC_SINGLE_1_ERR 0x0080000000000000ULL -#define CBE_MIC_FIR_ECC_MULTI_1_ERR 0x0040000000000000ULL -#define CBE_MIC_FIR_ECC_ERR_MASK 0xffff000000000000ULL -#define CBE_MIC_FIR_ECC_SINGLE_0_CTE 0x0000020000000000ULL -#define CBE_MIC_FIR_ECC_MULTI_0_CTE 0x0000010000000000ULL -#define CBE_MIC_FIR_ECC_SINGLE_1_CTE 0x0000008000000000ULL -#define CBE_MIC_FIR_ECC_MULTI_1_CTE 0x0000004000000000ULL -#define CBE_MIC_FIR_ECC_CTE_MASK 0x0000ffff00000000ULL -#define CBE_MIC_FIR_ECC_SINGLE_0_RESET 0x0000000002000000ULL -#define CBE_MIC_FIR_ECC_MULTI_0_RESET 0x0000000001000000ULL -#define CBE_MIC_FIR_ECC_SINGLE_1_RESET 0x0000000000800000ULL -#define CBE_MIC_FIR_ECC_MULTI_1_RESET 0x0000000000400000ULL -#define CBE_MIC_FIR_ECC_RESET_MASK 0x00000000ffff0000ULL -#define CBE_MIC_FIR_ECC_SINGLE_0_SET 0x0000000000000200ULL -#define CBE_MIC_FIR_ECC_MULTI_0_SET 0x0000000000000100ULL -#define CBE_MIC_FIR_ECC_SINGLE_1_SET 0x0000000000000080ULL -#define CBE_MIC_FIR_ECC_MULTI_1_SET 0x0000000000000040ULL -#define CBE_MIC_FIR_ECC_SET_MASK 0x000000000000ffffULL - u64 mic_fir_debug; /* 0x0238 */ - - u8 pad_0x0240_0x1000[0x1000 - 0x0240]; /* 0x0240 */ -}; - -extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np); -extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu); - -/* some utility functions to deal with SMT */ -extern u32 cbe_get_hw_thread_id(int cpu); -extern u32 cbe_cpu_to_node(int cpu); -extern u32 cbe_node_to_cpu(int node); - -/* Init this module early */ -extern void cbe_regs_init(void); - - -#endif /* CBE_REGS_H */ diff --git a/include/asm-powerpc/checksum.h b/include/asm-powerpc/checksum.h deleted file mode 100644 index 7cdf358337cf..000000000000 --- a/include/asm-powerpc/checksum.h +++ /dev/null @@ -1,117 +0,0 @@ -#ifndef _ASM_POWERPC_CHECKSUM_H -#define _ASM_POWERPC_CHECKSUM_H -#ifdef __KERNEL__ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. ihl is the number - * of 32-bit words and is always >= 5. - */ -extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum); - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -extern __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * Computes the checksum of a memory block at src, length len, - * and adds in "sum" (32-bit), while copying the block to dst. - * If an access exception occurs on src or dst, it stores -EFAULT - * to *src_err or *dst_err respectively (if that pointer is not - * NULL), and, for an error on src, zeroes the rest of dst. - * - * Like csum_partial, this must be called with even lengths, - * except for the last fragment. - */ -extern __wsum csum_partial_copy_generic(const void *src, void *dst, - int len, __wsum sum, - int *src_err, int *dst_err); -/* - * the same as csum_partial, but copies from src to dst while it - * checksums. - */ -#define csum_partial_copy_from_user(src, dst, len, sum, errp) \ - csum_partial_copy_generic((__force const void *)(src), (dst), (len), (sum), (errp), NULL) - -#define csum_partial_copy_nocheck(src, dst, len, sum) \ - csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL) - - -/* - * turns a 32-bit partial checksum (e.g. from csum_partial) into a - * 1's complement 16-bit checksum. - */ -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp; - - /* swap the two 16-bit halves of sum */ - __asm__("rlwinm %0,%1,16,0,31" : "=r" (tmp) : "r" (sum)); - /* if there is a carry from adding the two 16-bit halves, - it will carry from the lower half into the upper half, - giving us the correct sum in the upper half. */ - return (__force __sum16)(~((__force u32)sum + tmp) >> 16); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ -#ifdef __powerpc64__ - unsigned long s = (__force u32)sum; - - s += (__force u32)saddr; - s += (__force u32)daddr; - s += proto + len; - s += (s >> 32); - return (__force __wsum) s; -#else - __asm__("\n\ - addc %0,%0,%1 \n\ - adde %0,%0,%2 \n\ - adde %0,%0,%3 \n\ - addze %0,%0 \n\ - " - : "=r" (sum) - : "r" (daddr), "r"(saddr), "r"(proto + len), "0"(sum)); - return sum; -#endif -} -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-powerpc/clk_interface.h b/include/asm-powerpc/clk_interface.h deleted file mode 100644 index ab1882c1e176..000000000000 --- a/include/asm-powerpc/clk_interface.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_POWERPC_CLK_INTERFACE_H -#define __ASM_POWERPC_CLK_INTERFACE_H - -#include - -struct clk_interface { - struct clk* (*clk_get) (struct device *dev, const char *id); - int (*clk_enable) (struct clk *clk); - void (*clk_disable) (struct clk *clk); - unsigned long (*clk_get_rate) (struct clk *clk); - void (*clk_put) (struct clk *clk); - long (*clk_round_rate) (struct clk *clk, unsigned long rate); - int (*clk_set_rate) (struct clk *clk, unsigned long rate); - int (*clk_set_parent) (struct clk *clk, struct clk *parent); - struct clk* (*clk_get_parent) (struct clk *clk); -}; - -extern struct clk_interface clk_functions; - -#endif /* __ASM_POWERPC_CLK_INTERFACE_H */ diff --git a/include/asm-powerpc/code-patching.h b/include/asm-powerpc/code-patching.h deleted file mode 100644 index 107d9b915e33..000000000000 --- a/include/asm-powerpc/code-patching.h +++ /dev/null @@ -1,54 +0,0 @@ -#ifndef _ASM_POWERPC_CODE_PATCHING_H -#define _ASM_POWERPC_CODE_PATCHING_H - -/* - * Copyright 2008, Michael Ellerman, IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include - -#define PPC_NOP_INSTR 0x60000000 -#define PPC_LWSYNC_INSTR 0x7c2004ac - -/* Flags for create_branch: - * "b" == create_branch(addr, target, 0); - * "ba" == create_branch(addr, target, BRANCH_ABSOLUTE); - * "bl" == create_branch(addr, target, BRANCH_SET_LINK); - * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK); - */ -#define BRANCH_SET_LINK 0x1 -#define BRANCH_ABSOLUTE 0x2 - -unsigned int create_branch(const unsigned int *addr, - unsigned long target, int flags); -unsigned int create_cond_branch(const unsigned int *addr, - unsigned long target, int flags); -void patch_branch(unsigned int *addr, unsigned long target, int flags); -void patch_instruction(unsigned int *addr, unsigned int instr); - -int instr_is_relative_branch(unsigned int instr); -int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr); -unsigned long branch_target(const unsigned int *instr); -unsigned int translate_branch(const unsigned int *dest, - const unsigned int *src); - -static inline unsigned long ppc_function_entry(void *func) -{ -#ifdef CONFIG_PPC64 - /* - * On PPC64 the function pointer actually points to the function's - * descriptor. The first entry in the descriptor is the address - * of the function text. - */ - return ((func_descr_t *)func)->entry; -#else - return (unsigned long)func; -#endif -} - -#endif /* _ASM_POWERPC_CODE_PATCHING_H */ diff --git a/include/asm-powerpc/compat.h b/include/asm-powerpc/compat.h deleted file mode 100644 index d811a8cd7b58..000000000000 --- a/include/asm-powerpc/compat.h +++ /dev/null @@ -1,214 +0,0 @@ -#ifndef _ASM_POWERPC_COMPAT_H -#define _ASM_POWERPC_COMPAT_H -#ifdef __KERNEL__ -/* - * Architecture specific compatibility types - */ -#include -#include - -#define COMPAT_USER_HZ 100 - -typedef u32 compat_size_t; -typedef s32 compat_ssize_t; -typedef s32 compat_time_t; -typedef s32 compat_clock_t; -typedef s32 compat_pid_t; -typedef u32 __compat_uid_t; -typedef u32 __compat_gid_t; -typedef u32 __compat_uid32_t; -typedef u32 __compat_gid32_t; -typedef u32 compat_mode_t; -typedef u32 compat_ino_t; -typedef u32 compat_dev_t; -typedef s32 compat_off_t; -typedef s64 compat_loff_t; -typedef s16 compat_nlink_t; -typedef u16 compat_ipc_pid_t; -typedef s32 compat_daddr_t; -typedef u32 compat_caddr_t; -typedef __kernel_fsid_t compat_fsid_t; -typedef s32 compat_key_t; -typedef s32 compat_timer_t; - -typedef s32 compat_int_t; -typedef s32 compat_long_t; -typedef s64 compat_s64; -typedef u32 compat_uint_t; -typedef u32 compat_ulong_t; -typedef u64 compat_u64; - -struct compat_timespec { - compat_time_t tv_sec; - s32 tv_nsec; -}; - -struct compat_timeval { - compat_time_t tv_sec; - s32 tv_usec; -}; - -struct compat_stat { - compat_dev_t st_dev; - compat_ino_t st_ino; - compat_mode_t st_mode; - compat_nlink_t st_nlink; - __compat_uid32_t st_uid; - __compat_gid32_t st_gid; - compat_dev_t st_rdev; - compat_off_t st_size; - compat_off_t st_blksize; - compat_off_t st_blocks; - compat_time_t st_atime; - u32 st_atime_nsec; - compat_time_t st_mtime; - u32 st_mtime_nsec; - compat_time_t st_ctime; - u32 st_ctime_nsec; - u32 __unused4[2]; -}; - -struct compat_flock { - short l_type; - short l_whence; - compat_off_t l_start; - compat_off_t l_len; - compat_pid_t l_pid; -}; - -#define F_GETLK64 12 /* using 'struct flock64' */ -#define F_SETLK64 13 -#define F_SETLKW64 14 - -struct compat_flock64 { - short l_type; - short l_whence; - compat_loff_t l_start; - compat_loff_t l_len; - compat_pid_t l_pid; -}; - -struct compat_statfs { - int f_type; - int f_bsize; - int f_blocks; - int f_bfree; - int f_bavail; - int f_files; - int f_ffree; - compat_fsid_t f_fsid; - int f_namelen; /* SunOS ignores this field. */ - int f_frsize; - int f_spare[5]; -}; - -#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff -#define COMPAT_RLIM_INFINITY 0xffffffff - -typedef u32 compat_old_sigset_t; - -#define _COMPAT_NSIG 64 -#define _COMPAT_NSIG_BPW 32 - -typedef u32 compat_sigset_word; - -#define COMPAT_OFF_T_MAX 0x7fffffff -#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL - -/* - * A pointer passed in from user mode. This should not - * be used for syscall parameters, just declare them - * as pointers because the syscall entry code will have - * appropriately converted them already. - */ -typedef u32 compat_uptr_t; - -static inline void __user *compat_ptr(compat_uptr_t uptr) -{ - return (void __user *)(unsigned long)uptr; -} - -static inline compat_uptr_t ptr_to_compat(void __user *uptr) -{ - return (u32)(unsigned long)uptr; -} - -static inline void __user *compat_alloc_user_space(long len) -{ - struct pt_regs *regs = current->thread.regs; - unsigned long usp = regs->gpr[1]; - - /* - * We cant access below the stack pointer in the 32bit ABI and - * can access 288 bytes in the 64bit ABI - */ - if (!(test_thread_flag(TIF_32BIT))) - usp -= 288; - - return (void __user *) (usp - len); -} - -/* - * ipc64_perm is actually 32/64bit clean but since the compat layer refers to - * it we may as well define it. - */ -struct compat_ipc64_perm { - compat_key_t key; - __compat_uid_t uid; - __compat_gid_t gid; - __compat_uid_t cuid; - __compat_gid_t cgid; - compat_mode_t mode; - unsigned int seq; - unsigned int __pad2; - unsigned long __unused1; /* yes they really are 64bit pads */ - unsigned long __unused2; -}; - -struct compat_semid64_ds { - struct compat_ipc64_perm sem_perm; - unsigned int __unused1; - compat_time_t sem_otime; - unsigned int __unused2; - compat_time_t sem_ctime; - compat_ulong_t sem_nsems; - compat_ulong_t __unused3; - compat_ulong_t __unused4; -}; - -struct compat_msqid64_ds { - struct compat_ipc64_perm msg_perm; - unsigned int __unused1; - compat_time_t msg_stime; - unsigned int __unused2; - compat_time_t msg_rtime; - unsigned int __unused3; - compat_time_t msg_ctime; - compat_ulong_t msg_cbytes; - compat_ulong_t msg_qnum; - compat_ulong_t msg_qbytes; - compat_pid_t msg_lspid; - compat_pid_t msg_lrpid; - compat_ulong_t __unused4; - compat_ulong_t __unused5; -}; - -struct compat_shmid64_ds { - struct compat_ipc64_perm shm_perm; - unsigned int __unused1; - compat_time_t shm_atime; - unsigned int __unused2; - compat_time_t shm_dtime; - unsigned int __unused3; - compat_time_t shm_ctime; - unsigned int __unused4; - compat_size_t shm_segsz; - compat_pid_t shm_cpid; - compat_pid_t shm_lpid; - compat_ulong_t shm_nattch; - compat_ulong_t __unused5; - compat_ulong_t __unused6; -}; - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_COMPAT_H */ diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h deleted file mode 100644 index 24d79e3abd8e..000000000000 --- a/include/asm-powerpc/cpm.h +++ /dev/null @@ -1,106 +0,0 @@ -#ifndef __CPM_H -#define __CPM_H - -#include -#include -#include - -/* Opcodes common to CPM1 and CPM2 -*/ -#define CPM_CR_INIT_TRX ((ushort)0x0000) -#define CPM_CR_INIT_RX ((ushort)0x0001) -#define CPM_CR_INIT_TX ((ushort)0x0002) -#define CPM_CR_HUNT_MODE ((ushort)0x0003) -#define CPM_CR_STOP_TX ((ushort)0x0004) -#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) -#define CPM_CR_RESTART_TX ((ushort)0x0006) -#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007) -#define CPM_CR_SET_GADDR ((ushort)0x0008) -#define CPM_CR_SET_TIMER ((ushort)0x0008) -#define CPM_CR_STOP_IDMA ((ushort)0x000b) - -/* Buffer descriptors used by many of the CPM protocols. */ -typedef struct cpm_buf_desc { - ushort cbd_sc; /* Status and Control */ - ushort cbd_datlen; /* Data length in buffer */ - uint cbd_bufaddr; /* Buffer address in host memory */ -} cbd_t; - -/* Buffer descriptor control/status used by serial - */ - -#define BD_SC_EMPTY (0x8000) /* Receive is empty */ -#define BD_SC_READY (0x8000) /* Transmit is ready */ -#define BD_SC_WRAP (0x2000) /* Last buffer descriptor */ -#define BD_SC_INTRPT (0x1000) /* Interrupt on change */ -#define BD_SC_LAST (0x0800) /* Last buffer in frame */ -#define BD_SC_TC (0x0400) /* Transmit CRC */ -#define BD_SC_CM (0x0200) /* Continous mode */ -#define BD_SC_ID (0x0100) /* Rec'd too many idles */ -#define BD_SC_P (0x0100) /* xmt preamble */ -#define BD_SC_BR (0x0020) /* Break received */ -#define BD_SC_FR (0x0010) /* Framing error */ -#define BD_SC_PR (0x0008) /* Parity error */ -#define BD_SC_NAK (0x0004) /* NAK - did not respond */ -#define BD_SC_OV (0x0002) /* Overrun */ -#define BD_SC_UN (0x0002) /* Underrun */ -#define BD_SC_CD (0x0001) /* */ -#define BD_SC_CL (0x0001) /* Collision */ - -/* Buffer descriptor control/status used by Ethernet receive. - * Common to SCC and FCC. - */ -#define BD_ENET_RX_EMPTY (0x8000) -#define BD_ENET_RX_WRAP (0x2000) -#define BD_ENET_RX_INTR (0x1000) -#define BD_ENET_RX_LAST (0x0800) -#define BD_ENET_RX_FIRST (0x0400) -#define BD_ENET_RX_MISS (0x0100) -#define BD_ENET_RX_BC (0x0080) /* FCC Only */ -#define BD_ENET_RX_MC (0x0040) /* FCC Only */ -#define BD_ENET_RX_LG (0x0020) -#define BD_ENET_RX_NO (0x0010) -#define BD_ENET_RX_SH (0x0008) -#define BD_ENET_RX_CR (0x0004) -#define BD_ENET_RX_OV (0x0002) -#define BD_ENET_RX_CL (0x0001) -#define BD_ENET_RX_STATS (0x01ff) /* All status bits */ - -/* Buffer descriptor control/status used by Ethernet transmit. - * Common to SCC and FCC. - */ -#define BD_ENET_TX_READY (0x8000) -#define BD_ENET_TX_PAD (0x4000) -#define BD_ENET_TX_WRAP (0x2000) -#define BD_ENET_TX_INTR (0x1000) -#define BD_ENET_TX_LAST (0x0800) -#define BD_ENET_TX_TC (0x0400) -#define BD_ENET_TX_DEF (0x0200) -#define BD_ENET_TX_HB (0x0100) -#define BD_ENET_TX_LC (0x0080) -#define BD_ENET_TX_RL (0x0040) -#define BD_ENET_TX_RCMASK (0x003c) -#define BD_ENET_TX_UN (0x0002) -#define BD_ENET_TX_CSL (0x0001) -#define BD_ENET_TX_STATS (0x03ff) /* All status bits */ - -/* Buffer descriptor control/status used by Transparent mode SCC. - */ -#define BD_SCC_TX_LAST (0x0800) - -/* Buffer descriptor control/status used by I2C. - */ -#define BD_I2C_START (0x0400) - -int cpm_muram_init(void); -unsigned long cpm_muram_alloc(unsigned long size, unsigned long align); -int cpm_muram_free(unsigned long offset); -unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size); -void __iomem *cpm_muram_addr(unsigned long offset); -unsigned long cpm_muram_offset(void __iomem *addr); -dma_addr_t cpm_muram_dma(void __iomem *addr); -int cpm_command(u32 command, u8 opcode); - -int cpm2_gpiochip_add32(struct device_node *np); - -#endif diff --git a/include/asm-powerpc/cpm1.h b/include/asm-powerpc/cpm1.h deleted file mode 100644 index 2ff798744c1d..000000000000 --- a/include/asm-powerpc/cpm1.h +++ /dev/null @@ -1,652 +0,0 @@ -/* - * MPC8xx Communication Processor Module. - * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) - * - * This file contains structures and information for the communication - * processor channels. Some CPM control and status is available - * throught the MPC8xx internal memory map. See immap.h for details. - * This file only contains what I need for the moment, not the total - * CPM capabilities. I (or someone else) will add definitions as they - * are needed. -- Dan - * - * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 - * bytes of the DP RAM and relocates the I2C parameter area to the - * IDMA1 space. The remaining DP RAM is available for buffer descriptors - * or other use. - */ -#ifndef __CPM1__ -#define __CPM1__ - -#include -#include -#include - -/* CPM Command register. -*/ -#define CPM_CR_RST ((ushort)0x8000) -#define CPM_CR_OPCODE ((ushort)0x0f00) -#define CPM_CR_CHAN ((ushort)0x00f0) -#define CPM_CR_FLG ((ushort)0x0001) - -/* Channel numbers. -*/ -#define CPM_CR_CH_SCC1 ((ushort)0x0000) -#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */ -#define CPM_CR_CH_SCC2 ((ushort)0x0004) -#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */ -#define CPM_CR_CH_TIMER CPM_CR_CH_SPI -#define CPM_CR_CH_SCC3 ((ushort)0x0008) -#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */ -#define CPM_CR_CH_SCC4 ((ushort)0x000c) -#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */ - -#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) - -/* Export the base address of the communication processor registers - * and dual port ram. - */ -extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */ - -#define cpm_dpalloc cpm_muram_alloc -#define cpm_dpfree cpm_muram_free -#define cpm_dpram_addr cpm_muram_addr -#define cpm_dpram_phys cpm_muram_dma - -extern void cpm_setbrg(uint brg, uint rate); - -extern void cpm_load_patch(cpm8xx_t *cp); - -extern void cpm_reset(void); - -/* Parameter RAM offsets. -*/ -#define PROFF_SCC1 ((uint)0x0000) -#define PROFF_IIC ((uint)0x0080) -#define PROFF_SCC2 ((uint)0x0100) -#define PROFF_SPI ((uint)0x0180) -#define PROFF_SCC3 ((uint)0x0200) -#define PROFF_SMC1 ((uint)0x0280) -#define PROFF_SCC4 ((uint)0x0300) -#define PROFF_SMC2 ((uint)0x0380) - -/* Define enough so I can at least use the serial port as a UART. - * The MBX uses SMC1 as the host serial port. - */ -typedef struct smc_uart { - ushort smc_rbase; /* Rx Buffer descriptor base address */ - ushort smc_tbase; /* Tx Buffer descriptor base address */ - u_char smc_rfcr; /* Rx function code */ - u_char smc_tfcr; /* Tx function code */ - ushort smc_mrblr; /* Max receive buffer length */ - uint smc_rstate; /* Internal */ - uint smc_idp; /* Internal */ - ushort smc_rbptr; /* Internal */ - ushort smc_ibc; /* Internal */ - uint smc_rxtmp; /* Internal */ - uint smc_tstate; /* Internal */ - uint smc_tdp; /* Internal */ - ushort smc_tbptr; /* Internal */ - ushort smc_tbc; /* Internal */ - uint smc_txtmp; /* Internal */ - ushort smc_maxidl; /* Maximum idle characters */ - ushort smc_tmpidl; /* Temporary idle counter */ - ushort smc_brklen; /* Last received break length */ - ushort smc_brkec; /* rcv'd break condition counter */ - ushort smc_brkcr; /* xmt break count register */ - ushort smc_rmask; /* Temporary bit mask */ - char res1[8]; /* Reserved */ - ushort smc_rpbase; /* Relocation pointer */ -} smc_uart_t; - -/* Function code bits. -*/ -#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ - -/* SMC uart mode register. -*/ -#define SMCMR_REN ((ushort)0x0001) -#define SMCMR_TEN ((ushort)0x0002) -#define SMCMR_DM ((ushort)0x000c) -#define SMCMR_SM_GCI ((ushort)0x0000) -#define SMCMR_SM_UART ((ushort)0x0020) -#define SMCMR_SM_TRANS ((ushort)0x0030) -#define SMCMR_SM_MASK ((ushort)0x0030) -#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ -#define SMCMR_REVD SMCMR_PM_EVEN -#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ -#define SMCMR_BS SMCMR_PEN -#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ -#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ -#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) - -/* SMC2 as Centronics parallel printer. It is half duplex, in that - * it can only receive or transmit. The parameter ram values for - * each direction are either unique or properly overlap, so we can - * include them in one structure. - */ -typedef struct smc_centronics { - ushort scent_rbase; - ushort scent_tbase; - u_char scent_cfcr; - u_char scent_smask; - ushort scent_mrblr; - uint scent_rstate; - uint scent_r_ptr; - ushort scent_rbptr; - ushort scent_r_cnt; - uint scent_rtemp; - uint scent_tstate; - uint scent_t_ptr; - ushort scent_tbptr; - ushort scent_t_cnt; - uint scent_ttemp; - ushort scent_max_sl; - ushort scent_sl_cnt; - ushort scent_character1; - ushort scent_character2; - ushort scent_character3; - ushort scent_character4; - ushort scent_character5; - ushort scent_character6; - ushort scent_character7; - ushort scent_character8; - ushort scent_rccm; - ushort scent_rccr; -} smc_cent_t; - -/* Centronics Status Mask Register. -*/ -#define SMC_CENT_F ((u_char)0x08) -#define SMC_CENT_PE ((u_char)0x04) -#define SMC_CENT_S ((u_char)0x02) - -/* SMC Event and Mask register. -*/ -#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ -#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ -#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ -#define SMCM_BSY ((unsigned char)0x04) -#define SMCM_TX ((unsigned char)0x02) -#define SMCM_RX ((unsigned char)0x01) - -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - -/* SI Clock Route Register -*/ -#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000) -#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000) -#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800) -#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100) -#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000) -#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000) -#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000) -#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000) - -/* SCCs. -*/ -#define SCC_GSMRH_IRP ((uint)0x00040000) -#define SCC_GSMRH_GDE ((uint)0x00010000) -#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) -#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) -#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) -#define SCC_GSMRH_REVD ((uint)0x00002000) -#define SCC_GSMRH_TRX ((uint)0x00001000) -#define SCC_GSMRH_TTX ((uint)0x00000800) -#define SCC_GSMRH_CDP ((uint)0x00000400) -#define SCC_GSMRH_CTSP ((uint)0x00000200) -#define SCC_GSMRH_CDS ((uint)0x00000100) -#define SCC_GSMRH_CTSS ((uint)0x00000080) -#define SCC_GSMRH_TFL ((uint)0x00000040) -#define SCC_GSMRH_RFW ((uint)0x00000020) -#define SCC_GSMRH_TXSY ((uint)0x00000010) -#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) -#define SCC_GSMRH_SYNL8 ((uint)0x00000008) -#define SCC_GSMRH_SYNL4 ((uint)0x00000004) -#define SCC_GSMRH_RTSM ((uint)0x00000002) -#define SCC_GSMRH_RSYN ((uint)0x00000001) - -#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ -#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) -#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) -#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) -#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) -#define SCC_GSMRL_TCI ((uint)0x10000000) -#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) -#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) -#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) -#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) -#define SCC_GSMRL_RINV ((uint)0x02000000) -#define SCC_GSMRL_TINV ((uint)0x01000000) -#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) -#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) -#define SCC_GSMRL_TPL_48 ((uint)0x00800000) -#define SCC_GSMRL_TPL_32 ((uint)0x00600000) -#define SCC_GSMRL_TPL_16 ((uint)0x00400000) -#define SCC_GSMRL_TPL_8 ((uint)0x00200000) -#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) -#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) -#define SCC_GSMRL_TPP_01 ((uint)0x00100000) -#define SCC_GSMRL_TPP_10 ((uint)0x00080000) -#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) -#define SCC_GSMRL_TEND ((uint)0x00040000) -#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) -#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) -#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) -#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) -#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) -#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) -#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) -#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) -#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) -#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) -#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) -#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) -#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) -#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) -#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ -#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) -#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) -#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) -#define SCC_GSMRL_ENR ((uint)0x00000020) -#define SCC_GSMRL_ENT ((uint)0x00000010) -#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) -#define SCC_GSMRL_MODE_QMC ((uint)0x0000000a) -#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) -#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) -#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) -#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) -#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) -#define SCC_GSMRL_MODE_UART ((uint)0x00000004) -#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) -#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) -#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) - -#define SCC_TODR_TOD ((ushort)0x8000) - -/* SCC Event and Mask register. -*/ -#define SCCM_TXE ((unsigned char)0x10) -#define SCCM_BSY ((unsigned char)0x04) -#define SCCM_TX ((unsigned char)0x02) -#define SCCM_RX ((unsigned char)0x01) - -typedef struct scc_param { - ushort scc_rbase; /* Rx Buffer descriptor base address */ - ushort scc_tbase; /* Tx Buffer descriptor base address */ - u_char scc_rfcr; /* Rx function code */ - u_char scc_tfcr; /* Tx function code */ - ushort scc_mrblr; /* Max receive buffer length */ - uint scc_rstate; /* Internal */ - uint scc_idp; /* Internal */ - ushort scc_rbptr; /* Internal */ - ushort scc_ibc; /* Internal */ - uint scc_rxtmp; /* Internal */ - uint scc_tstate; /* Internal */ - uint scc_tdp; /* Internal */ - ushort scc_tbptr; /* Internal */ - ushort scc_tbc; /* Internal */ - uint scc_txtmp; /* Internal */ - uint scc_rcrc; /* Internal */ - uint scc_tcrc; /* Internal */ -} sccp_t; - -/* Function code bits. -*/ -#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ - -/* CPM Ethernet through SCCx. - */ -typedef struct scc_enet { - sccp_t sen_genscc; - uint sen_cpres; /* Preset CRC */ - uint sen_cmask; /* Constant mask for CRC */ - uint sen_crcec; /* CRC Error counter */ - uint sen_alec; /* alignment error counter */ - uint sen_disfc; /* discard frame counter */ - ushort sen_pads; /* Tx short frame pad character */ - ushort sen_retlim; /* Retry limit threshold */ - ushort sen_retcnt; /* Retry limit counter */ - ushort sen_maxflr; /* maximum frame length register */ - ushort sen_minflr; /* minimum frame length register */ - ushort sen_maxd1; /* maximum DMA1 length */ - ushort sen_maxd2; /* maximum DMA2 length */ - ushort sen_maxd; /* Rx max DMA */ - ushort sen_dmacnt; /* Rx DMA counter */ - ushort sen_maxb; /* Max BD byte count */ - ushort sen_gaddr1; /* Group address filter */ - ushort sen_gaddr2; - ushort sen_gaddr3; - ushort sen_gaddr4; - uint sen_tbuf0data0; /* Save area 0 - current frame */ - uint sen_tbuf0data1; /* Save area 1 - current frame */ - uint sen_tbuf0rba; /* Internal */ - uint sen_tbuf0crc; /* Internal */ - ushort sen_tbuf0bcnt; /* Internal */ - ushort sen_paddrh; /* physical address (MSB) */ - ushort sen_paddrm; - ushort sen_paddrl; /* physical address (LSB) */ - ushort sen_pper; /* persistence */ - ushort sen_rfbdptr; /* Rx first BD pointer */ - ushort sen_tfbdptr; /* Tx first BD pointer */ - ushort sen_tlbdptr; /* Tx last BD pointer */ - uint sen_tbuf1data0; /* Save area 0 - current frame */ - uint sen_tbuf1data1; /* Save area 1 - current frame */ - uint sen_tbuf1rba; /* Internal */ - uint sen_tbuf1crc; /* Internal */ - ushort sen_tbuf1bcnt; /* Internal */ - ushort sen_txlen; /* Tx Frame length counter */ - ushort sen_iaddr1; /* Individual address filter */ - ushort sen_iaddr2; - ushort sen_iaddr3; - ushort sen_iaddr4; - ushort sen_boffcnt; /* Backoff counter */ - - /* NOTE: Some versions of the manual have the following items - * incorrectly documented. Below is the proper order. - */ - ushort sen_taddrh; /* temp address (MSB) */ - ushort sen_taddrm; - ushort sen_taddrl; /* temp address (LSB) */ -} scc_enet_t; - -/* SCC Event register as used by Ethernet. -*/ -#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ -#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* SCC Mode Register (PMSR) as used by Ethernet. -*/ -#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ -#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ -#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ -#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ -#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ -#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ -#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ -#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ -#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ -#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ -#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ -#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ -#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ - -/* SCC as UART -*/ -typedef struct scc_uart { - sccp_t scc_genscc; - char res1[8]; /* Reserved */ - ushort scc_maxidl; /* Maximum idle chars */ - ushort scc_idlc; /* temp idle counter */ - ushort scc_brkcr; /* Break count register */ - ushort scc_parec; /* receive parity error counter */ - ushort scc_frmec; /* receive framing error counter */ - ushort scc_nosec; /* receive noise counter */ - ushort scc_brkec; /* receive break condition counter */ - ushort scc_brkln; /* last received break length */ - ushort scc_uaddr1; /* UART address character 1 */ - ushort scc_uaddr2; /* UART address character 2 */ - ushort scc_rtemp; /* Temp storage */ - ushort scc_toseq; /* Transmit out of sequence char */ - ushort scc_char1; /* control character 1 */ - ushort scc_char2; /* control character 2 */ - ushort scc_char3; /* control character 3 */ - ushort scc_char4; /* control character 4 */ - ushort scc_char5; /* control character 5 */ - ushort scc_char6; /* control character 6 */ - ushort scc_char7; /* control character 7 */ - ushort scc_char8; /* control character 8 */ - ushort scc_rccm; /* receive control character mask */ - ushort scc_rccr; /* receive control character register */ - ushort scc_rlbc; /* receive last break character */ -} scc_uart_t; - -/* SCC Event and Mask registers when it is used as a UART. -*/ -#define UART_SCCM_GLR ((ushort)0x1000) -#define UART_SCCM_GLT ((ushort)0x0800) -#define UART_SCCM_AB ((ushort)0x0200) -#define UART_SCCM_IDL ((ushort)0x0100) -#define UART_SCCM_GRA ((ushort)0x0080) -#define UART_SCCM_BRKE ((ushort)0x0040) -#define UART_SCCM_BRKS ((ushort)0x0020) -#define UART_SCCM_CCR ((ushort)0x0008) -#define UART_SCCM_BSY ((ushort)0x0004) -#define UART_SCCM_TX ((ushort)0x0002) -#define UART_SCCM_RX ((ushort)0x0001) - -/* The SCC PMSR when used as a UART. -*/ -#define SCU_PSMR_FLC ((ushort)0x8000) -#define SCU_PSMR_SL ((ushort)0x4000) -#define SCU_PSMR_CL ((ushort)0x3000) -#define SCU_PSMR_UM ((ushort)0x0c00) -#define SCU_PSMR_FRZ ((ushort)0x0200) -#define SCU_PSMR_RZS ((ushort)0x0100) -#define SCU_PSMR_SYN ((ushort)0x0080) -#define SCU_PSMR_DRT ((ushort)0x0040) -#define SCU_PSMR_PEN ((ushort)0x0010) -#define SCU_PSMR_RPM ((ushort)0x000c) -#define SCU_PSMR_REVP ((ushort)0x0008) -#define SCU_PSMR_TPM ((ushort)0x0003) -#define SCU_PSMR_TEVP ((ushort)0x0002) - -/* CPM Transparent mode SCC. - */ -typedef struct scc_trans { - sccp_t st_genscc; - uint st_cpres; /* Preset CRC */ - uint st_cmask; /* Constant mask for CRC */ -} scc_trans_t; - -/* IIC parameter RAM. -*/ -typedef struct iic { - ushort iic_rbase; /* Rx Buffer descriptor base address */ - ushort iic_tbase; /* Tx Buffer descriptor base address */ - u_char iic_rfcr; /* Rx function code */ - u_char iic_tfcr; /* Tx function code */ - ushort iic_mrblr; /* Max receive buffer length */ - uint iic_rstate; /* Internal */ - uint iic_rdp; /* Internal */ - ushort iic_rbptr; /* Internal */ - ushort iic_rbc; /* Internal */ - uint iic_rxtmp; /* Internal */ - uint iic_tstate; /* Internal */ - uint iic_tdp; /* Internal */ - ushort iic_tbptr; /* Internal */ - ushort iic_tbc; /* Internal */ - uint iic_txtmp; /* Internal */ - char res1[4]; /* Reserved */ - ushort iic_rpbase; /* Relocation pointer */ - char res2[2]; /* Reserved */ -} iic_t; - -/* SPI parameter RAM. -*/ -typedef struct spi { - ushort spi_rbase; /* Rx Buffer descriptor base address */ - ushort spi_tbase; /* Tx Buffer descriptor base address */ - u_char spi_rfcr; /* Rx function code */ - u_char spi_tfcr; /* Tx function code */ - ushort spi_mrblr; /* Max receive buffer length */ - uint spi_rstate; /* Internal */ - uint spi_rdp; /* Internal */ - ushort spi_rbptr; /* Internal */ - ushort spi_rbc; /* Internal */ - uint spi_rxtmp; /* Internal */ - uint spi_tstate; /* Internal */ - uint spi_tdp; /* Internal */ - ushort spi_tbptr; /* Internal */ - ushort spi_tbc; /* Internal */ - uint spi_txtmp; /* Internal */ - uint spi_res; - ushort spi_rpbase; /* Relocation pointer */ - ushort spi_res2; -} spi_t; - -/* SPI Mode register. -*/ -#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ -#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ -#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ -#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ -#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ -#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ -#define SPMODE_EN ((ushort)0x0100) /* Enable */ -#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ -#define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */ -#define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */ -#define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */ -#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ - -/* SPIE fields */ -#define SPIE_MME 0x20 -#define SPIE_TXE 0x10 -#define SPIE_BSY 0x04 -#define SPIE_TXB 0x02 -#define SPIE_RXB 0x01 - -/* - * RISC Controller Configuration Register definitons - */ -#define RCCR_TIME 0x8000 /* RISC Timer Enable */ -#define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */ -#define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */ - -/* RISC Timer Parameter RAM offset */ -#define PROFF_RTMR ((uint)0x01B0) - -typedef struct risc_timer_pram { - unsigned short tm_base; /* RISC Timer Table Base Address */ - unsigned short tm_ptr; /* RISC Timer Table Pointer (internal) */ - unsigned short r_tmr; /* RISC Timer Mode Register */ - unsigned short r_tmv; /* RISC Timer Valid Register */ - unsigned long tm_cmd; /* RISC Timer Command Register */ - unsigned long tm_cnt; /* RISC Timer Internal Count */ -} rt_pram_t; - -/* Bits in RISC Timer Command Register */ -#define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */ -#define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */ -#define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */ -#define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */ -#define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */ - -/* CPM interrupts. There are nearly 32 interrupts generated by CPM - * channels or devices. All of these are presented to the PPC core - * as a single interrupt. The CPM interrupt handler dispatches its - * own handlers, in a similar fashion to the PPC core handler. We - * use the table as defined in the manuals (i.e. no special high - * priority and SCC1 == SCCa, etc...). - */ -#define CPMVEC_NR 32 -#define CPMVEC_PIO_PC15 ((ushort)0x1f) -#define CPMVEC_SCC1 ((ushort)0x1e) -#define CPMVEC_SCC2 ((ushort)0x1d) -#define CPMVEC_SCC3 ((ushort)0x1c) -#define CPMVEC_SCC4 ((ushort)0x1b) -#define CPMVEC_PIO_PC14 ((ushort)0x1a) -#define CPMVEC_TIMER1 ((ushort)0x19) -#define CPMVEC_PIO_PC13 ((ushort)0x18) -#define CPMVEC_PIO_PC12 ((ushort)0x17) -#define CPMVEC_SDMA_CB_ERR ((ushort)0x16) -#define CPMVEC_IDMA1 ((ushort)0x15) -#define CPMVEC_IDMA2 ((ushort)0x14) -#define CPMVEC_TIMER2 ((ushort)0x12) -#define CPMVEC_RISCTIMER ((ushort)0x11) -#define CPMVEC_I2C ((ushort)0x10) -#define CPMVEC_PIO_PC11 ((ushort)0x0f) -#define CPMVEC_PIO_PC10 ((ushort)0x0e) -#define CPMVEC_TIMER3 ((ushort)0x0c) -#define CPMVEC_PIO_PC9 ((ushort)0x0b) -#define CPMVEC_PIO_PC8 ((ushort)0x0a) -#define CPMVEC_PIO_PC7 ((ushort)0x09) -#define CPMVEC_TIMER4 ((ushort)0x07) -#define CPMVEC_PIO_PC6 ((ushort)0x06) -#define CPMVEC_SPI ((ushort)0x05) -#define CPMVEC_SMC1 ((ushort)0x04) -#define CPMVEC_SMC2 ((ushort)0x03) -#define CPMVEC_PIO_PC5 ((ushort)0x02) -#define CPMVEC_PIO_PC4 ((ushort)0x01) -#define CPMVEC_ERROR ((ushort)0x00) - -/* CPM interrupt configuration vector. -*/ -#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ -#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ -#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ -#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ -#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ -#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ -#define CICR_IEN ((uint)0x00000080) /* Int. enable */ -#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ - -#define IMAP_ADDR (get_immrbase()) - -#define CPM_PIN_INPUT 0 -#define CPM_PIN_OUTPUT 1 -#define CPM_PIN_PRIMARY 0 -#define CPM_PIN_SECONDARY 2 -#define CPM_PIN_GPIO 4 -#define CPM_PIN_OPENDRAIN 8 - -enum cpm_port { - CPM_PORTA, - CPM_PORTB, - CPM_PORTC, - CPM_PORTD, - CPM_PORTE, -}; - -void cpm1_set_pin(enum cpm_port port, int pin, int flags); - -enum cpm_clk_dir { - CPM_CLK_RX, - CPM_CLK_TX, - CPM_CLK_RTX -}; - -enum cpm_clk_target { - CPM_CLK_SCC1, - CPM_CLK_SCC2, - CPM_CLK_SCC3, - CPM_CLK_SCC4, - CPM_CLK_SMC1, - CPM_CLK_SMC2, -}; - -enum cpm_clk { - CPM_BRG1, /* Baud Rate Generator 1 */ - CPM_BRG2, /* Baud Rate Generator 2 */ - CPM_BRG3, /* Baud Rate Generator 3 */ - CPM_BRG4, /* Baud Rate Generator 4 */ - CPM_CLK1, /* Clock 1 */ - CPM_CLK2, /* Clock 2 */ - CPM_CLK3, /* Clock 3 */ - CPM_CLK4, /* Clock 4 */ - CPM_CLK5, /* Clock 5 */ - CPM_CLK6, /* Clock 6 */ - CPM_CLK7, /* Clock 7 */ - CPM_CLK8, /* Clock 8 */ -}; - -int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode); - -#endif /* __CPM1__ */ diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h deleted file mode 100644 index 2a6fa0183ac9..000000000000 --- a/include/asm-powerpc/cpm2.h +++ /dev/null @@ -1,1195 +0,0 @@ -/* - * Communication Processor Module v2. - * - * This file contains structures and information for the communication - * processor channels found in the dual port RAM or parameter RAM. - * All CPM control and status is available through the CPM2 internal - * memory map. See immap_cpm2.h for details. - */ -#ifdef __KERNEL__ -#ifndef __CPM2__ -#define __CPM2__ - -#include -#include -#include - -#ifdef CONFIG_PPC_85xx -#define CPM_MAP_ADDR (get_immrbase() + 0x80000) -#endif - -/* CPM Command register. -*/ -#define CPM_CR_RST ((uint)0x80000000) -#define CPM_CR_PAGE ((uint)0x7c000000) -#define CPM_CR_SBLOCK ((uint)0x03e00000) -#define CPM_CR_FLG ((uint)0x00010000) -#define CPM_CR_MCN ((uint)0x00003fc0) -#define CPM_CR_OPCODE ((uint)0x0000000f) - -/* Device sub-block and page codes. -*/ -#define CPM_CR_SCC1_SBLOCK (0x04) -#define CPM_CR_SCC2_SBLOCK (0x05) -#define CPM_CR_SCC3_SBLOCK (0x06) -#define CPM_CR_SCC4_SBLOCK (0x07) -#define CPM_CR_SMC1_SBLOCK (0x08) -#define CPM_CR_SMC2_SBLOCK (0x09) -#define CPM_CR_SPI_SBLOCK (0x0a) -#define CPM_CR_I2C_SBLOCK (0x0b) -#define CPM_CR_TIMER_SBLOCK (0x0f) -#define CPM_CR_RAND_SBLOCK (0x0e) -#define CPM_CR_FCC1_SBLOCK (0x10) -#define CPM_CR_FCC2_SBLOCK (0x11) -#define CPM_CR_FCC3_SBLOCK (0x12) -#define CPM_CR_IDMA1_SBLOCK (0x14) -#define CPM_CR_IDMA2_SBLOCK (0x15) -#define CPM_CR_IDMA3_SBLOCK (0x16) -#define CPM_CR_IDMA4_SBLOCK (0x17) -#define CPM_CR_MCC1_SBLOCK (0x1c) - -#define CPM_CR_FCC_SBLOCK(x) (x + 0x10) - -#define CPM_CR_SCC1_PAGE (0x00) -#define CPM_CR_SCC2_PAGE (0x01) -#define CPM_CR_SCC3_PAGE (0x02) -#define CPM_CR_SCC4_PAGE (0x03) -#define CPM_CR_SMC1_PAGE (0x07) -#define CPM_CR_SMC2_PAGE (0x08) -#define CPM_CR_SPI_PAGE (0x09) -#define CPM_CR_I2C_PAGE (0x0a) -#define CPM_CR_TIMER_PAGE (0x0a) -#define CPM_CR_RAND_PAGE (0x0a) -#define CPM_CR_FCC1_PAGE (0x04) -#define CPM_CR_FCC2_PAGE (0x05) -#define CPM_CR_FCC3_PAGE (0x06) -#define CPM_CR_IDMA1_PAGE (0x07) -#define CPM_CR_IDMA2_PAGE (0x08) -#define CPM_CR_IDMA3_PAGE (0x09) -#define CPM_CR_IDMA4_PAGE (0x0a) -#define CPM_CR_MCC1_PAGE (0x07) -#define CPM_CR_MCC2_PAGE (0x08) - -#define CPM_CR_FCC_PAGE(x) (x + 0x04) - -/* CPM2-specific opcodes (see cpm.h for common opcodes) -*/ -#define CPM_CR_START_IDMA ((ushort)0x0009) - -#define mk_cr_cmd(PG, SBC, MCN, OP) \ - ((PG << 26) | (SBC << 21) | (MCN << 6) | OP) - -/* The number of pages of host memory we allocate for CPM. This is - * done early in kernel initialization to get physically contiguous - * pages. - */ -#define NUM_CPM_HOST_PAGES 2 - -/* Export the base address of the communication processor registers - * and dual port ram. - */ -extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */ - -#define cpm_dpalloc cpm_muram_alloc -#define cpm_dpfree cpm_muram_free -#define cpm_dpram_addr cpm_muram_addr - -extern void cpm2_reset(void); - -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - -#define CPM2_BRG_INT_CLK (get_brgfreq()) -#define CPM2_BRG_UART_CLK (CPM2_BRG_INT_CLK/16) - -extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src); - -/* This function is used by UARTS, or anything else that uses a 16x - * oversampled clock. - */ -static inline void cpm_setbrg(uint brg, uint rate) -{ - __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT); -} - -/* This function is used to set high speed synchronous baud rate - * clocks. - */ -static inline void cpm2_fastbrg(uint brg, uint rate, int div16) -{ - __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT); -} - -/* Function code bits, usually generic to devices. -*/ -#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ -#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */ -#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */ -#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */ -#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */ - -/* Parameter RAM offsets from the base. -*/ -#define PROFF_SCC1 ((uint)0x8000) -#define PROFF_SCC2 ((uint)0x8100) -#define PROFF_SCC3 ((uint)0x8200) -#define PROFF_SCC4 ((uint)0x8300) -#define PROFF_FCC1 ((uint)0x8400) -#define PROFF_FCC2 ((uint)0x8500) -#define PROFF_FCC3 ((uint)0x8600) -#define PROFF_MCC1 ((uint)0x8700) -#define PROFF_SMC1_BASE ((uint)0x87fc) -#define PROFF_IDMA1_BASE ((uint)0x87fe) -#define PROFF_MCC2 ((uint)0x8800) -#define PROFF_SMC2_BASE ((uint)0x88fc) -#define PROFF_IDMA2_BASE ((uint)0x88fe) -#define PROFF_SPI_BASE ((uint)0x89fc) -#define PROFF_IDMA3_BASE ((uint)0x89fe) -#define PROFF_TIMERS ((uint)0x8ae0) -#define PROFF_REVNUM ((uint)0x8af0) -#define PROFF_RAND ((uint)0x8af8) -#define PROFF_I2C_BASE ((uint)0x8afc) -#define PROFF_IDMA4_BASE ((uint)0x8afe) - -#define PROFF_SCC_SIZE ((uint)0x100) -#define PROFF_FCC_SIZE ((uint)0x100) -#define PROFF_SMC_SIZE ((uint)64) - -/* The SMCs are relocated to any of the first eight DPRAM pages. - * We will fix these at the first locations of DPRAM, until we - * get some microcode patches :-). - * The parameter ram space for the SMCs is fifty-some bytes, and - * they are required to start on a 64 byte boundary. - */ -#define PROFF_SMC1 (0) -#define PROFF_SMC2 (64) - - -/* Define enough so I can at least use the serial port as a UART. - */ -typedef struct smc_uart { - ushort smc_rbase; /* Rx Buffer descriptor base address */ - ushort smc_tbase; /* Tx Buffer descriptor base address */ - u_char smc_rfcr; /* Rx function code */ - u_char smc_tfcr; /* Tx function code */ - ushort smc_mrblr; /* Max receive buffer length */ - uint smc_rstate; /* Internal */ - uint smc_idp; /* Internal */ - ushort smc_rbptr; /* Internal */ - ushort smc_ibc; /* Internal */ - uint smc_rxtmp; /* Internal */ - uint smc_tstate; /* Internal */ - uint smc_tdp; /* Internal */ - ushort smc_tbptr; /* Internal */ - ushort smc_tbc; /* Internal */ - uint smc_txtmp; /* Internal */ - ushort smc_maxidl; /* Maximum idle characters */ - ushort smc_tmpidl; /* Temporary idle counter */ - ushort smc_brklen; /* Last received break length */ - ushort smc_brkec; /* rcv'd break condition counter */ - ushort smc_brkcr; /* xmt break count register */ - ushort smc_rmask; /* Temporary bit mask */ - uint smc_stmp; /* SDMA Temp */ -} smc_uart_t; - -/* SMC uart mode register (Internal memory map). -*/ -#define SMCMR_REN ((ushort)0x0001) -#define SMCMR_TEN ((ushort)0x0002) -#define SMCMR_DM ((ushort)0x000c) -#define SMCMR_SM_GCI ((ushort)0x0000) -#define SMCMR_SM_UART ((ushort)0x0020) -#define SMCMR_SM_TRANS ((ushort)0x0030) -#define SMCMR_SM_MASK ((ushort)0x0030) -#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ -#define SMCMR_REVD SMCMR_PM_EVEN -#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ -#define SMCMR_BS SMCMR_PEN -#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ -#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ -#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) - -/* SMC Event and Mask register. -*/ -#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ -#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ -#define SMCM_TXE ((unsigned char)0x10) -#define SMCM_BSY ((unsigned char)0x04) -#define SMCM_TX ((unsigned char)0x02) -#define SMCM_RX ((unsigned char)0x01) - -/* SCCs. -*/ -#define SCC_GSMRH_IRP ((uint)0x00040000) -#define SCC_GSMRH_GDE ((uint)0x00010000) -#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) -#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) -#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) -#define SCC_GSMRH_REVD ((uint)0x00002000) -#define SCC_GSMRH_TRX ((uint)0x00001000) -#define SCC_GSMRH_TTX ((uint)0x00000800) -#define SCC_GSMRH_CDP ((uint)0x00000400) -#define SCC_GSMRH_CTSP ((uint)0x00000200) -#define SCC_GSMRH_CDS ((uint)0x00000100) -#define SCC_GSMRH_CTSS ((uint)0x00000080) -#define SCC_GSMRH_TFL ((uint)0x00000040) -#define SCC_GSMRH_RFW ((uint)0x00000020) -#define SCC_GSMRH_TXSY ((uint)0x00000010) -#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) -#define SCC_GSMRH_SYNL8 ((uint)0x00000008) -#define SCC_GSMRH_SYNL4 ((uint)0x00000004) -#define SCC_GSMRH_RTSM ((uint)0x00000002) -#define SCC_GSMRH_RSYN ((uint)0x00000001) - -#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ -#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) -#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) -#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) -#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) -#define SCC_GSMRL_TCI ((uint)0x10000000) -#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) -#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) -#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) -#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) -#define SCC_GSMRL_RINV ((uint)0x02000000) -#define SCC_GSMRL_TINV ((uint)0x01000000) -#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) -#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) -#define SCC_GSMRL_TPL_48 ((uint)0x00800000) -#define SCC_GSMRL_TPL_32 ((uint)0x00600000) -#define SCC_GSMRL_TPL_16 ((uint)0x00400000) -#define SCC_GSMRL_TPL_8 ((uint)0x00200000) -#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) -#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) -#define SCC_GSMRL_TPP_01 ((uint)0x00100000) -#define SCC_GSMRL_TPP_10 ((uint)0x00080000) -#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) -#define SCC_GSMRL_TEND ((uint)0x00040000) -#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) -#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) -#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) -#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) -#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) -#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) -#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) -#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) -#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) -#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) -#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) -#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) -#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) -#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) -#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ -#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) -#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) -#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) -#define SCC_GSMRL_ENR ((uint)0x00000020) -#define SCC_GSMRL_ENT ((uint)0x00000010) -#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) -#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) -#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) -#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) -#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) -#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) -#define SCC_GSMRL_MODE_UART ((uint)0x00000004) -#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) -#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) -#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) - -#define SCC_TODR_TOD ((ushort)0x8000) - -/* SCC Event and Mask register. -*/ -#define SCCM_TXE ((unsigned char)0x10) -#define SCCM_BSY ((unsigned char)0x04) -#define SCCM_TX ((unsigned char)0x02) -#define SCCM_RX ((unsigned char)0x01) - -typedef struct scc_param { - ushort scc_rbase; /* Rx Buffer descriptor base address */ - ushort scc_tbase; /* Tx Buffer descriptor base address */ - u_char scc_rfcr; /* Rx function code */ - u_char scc_tfcr; /* Tx function code */ - ushort scc_mrblr; /* Max receive buffer length */ - uint scc_rstate; /* Internal */ - uint scc_idp; /* Internal */ - ushort scc_rbptr; /* Internal */ - ushort scc_ibc; /* Internal */ - uint scc_rxtmp; /* Internal */ - uint scc_tstate; /* Internal */ - uint scc_tdp; /* Internal */ - ushort scc_tbptr; /* Internal */ - ushort scc_tbc; /* Internal */ - uint scc_txtmp; /* Internal */ - uint scc_rcrc; /* Internal */ - uint scc_tcrc; /* Internal */ -} sccp_t; - -/* CPM Ethernet through SCC1. - */ -typedef struct scc_enet { - sccp_t sen_genscc; - uint sen_cpres; /* Preset CRC */ - uint sen_cmask; /* Constant mask for CRC */ - uint sen_crcec; /* CRC Error counter */ - uint sen_alec; /* alignment error counter */ - uint sen_disfc; /* discard frame counter */ - ushort sen_pads; /* Tx short frame pad character */ - ushort sen_retlim; /* Retry limit threshold */ - ushort sen_retcnt; /* Retry limit counter */ - ushort sen_maxflr; /* maximum frame length register */ - ushort sen_minflr; /* minimum frame length register */ - ushort sen_maxd1; /* maximum DMA1 length */ - ushort sen_maxd2; /* maximum DMA2 length */ - ushort sen_maxd; /* Rx max DMA */ - ushort sen_dmacnt; /* Rx DMA counter */ - ushort sen_maxb; /* Max BD byte count */ - ushort sen_gaddr1; /* Group address filter */ - ushort sen_gaddr2; - ushort sen_gaddr3; - ushort sen_gaddr4; - uint sen_tbuf0data0; /* Save area 0 - current frame */ - uint sen_tbuf0data1; /* Save area 1 - current frame */ - uint sen_tbuf0rba; /* Internal */ - uint sen_tbuf0crc; /* Internal */ - ushort sen_tbuf0bcnt; /* Internal */ - ushort sen_paddrh; /* physical address (MSB) */ - ushort sen_paddrm; - ushort sen_paddrl; /* physical address (LSB) */ - ushort sen_pper; /* persistence */ - ushort sen_rfbdptr; /* Rx first BD pointer */ - ushort sen_tfbdptr; /* Tx first BD pointer */ - ushort sen_tlbdptr; /* Tx last BD pointer */ - uint sen_tbuf1data0; /* Save area 0 - current frame */ - uint sen_tbuf1data1; /* Save area 1 - current frame */ - uint sen_tbuf1rba; /* Internal */ - uint sen_tbuf1crc; /* Internal */ - ushort sen_tbuf1bcnt; /* Internal */ - ushort sen_txlen; /* Tx Frame length counter */ - ushort sen_iaddr1; /* Individual address filter */ - ushort sen_iaddr2; - ushort sen_iaddr3; - ushort sen_iaddr4; - ushort sen_boffcnt; /* Backoff counter */ - - /* NOTE: Some versions of the manual have the following items - * incorrectly documented. Below is the proper order. - */ - ushort sen_taddrh; /* temp address (MSB) */ - ushort sen_taddrm; - ushort sen_taddrl; /* temp address (LSB) */ -} scc_enet_t; - - -/* SCC Event register as used by Ethernet. -*/ -#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ -#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* SCC Mode Register (PSMR) as used by Ethernet. -*/ -#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ -#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ -#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ -#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ -#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ -#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ -#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ -#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ -#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ -#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ -#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ -#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ -#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ - -/* SCC as UART -*/ -typedef struct scc_uart { - sccp_t scc_genscc; - uint scc_res1; /* Reserved */ - uint scc_res2; /* Reserved */ - ushort scc_maxidl; /* Maximum idle chars */ - ushort scc_idlc; /* temp idle counter */ - ushort scc_brkcr; /* Break count register */ - ushort scc_parec; /* receive parity error counter */ - ushort scc_frmec; /* receive framing error counter */ - ushort scc_nosec; /* receive noise counter */ - ushort scc_brkec; /* receive break condition counter */ - ushort scc_brkln; /* last received break length */ - ushort scc_uaddr1; /* UART address character 1 */ - ushort scc_uaddr2; /* UART address character 2 */ - ushort scc_rtemp; /* Temp storage */ - ushort scc_toseq; /* Transmit out of sequence char */ - ushort scc_char1; /* control character 1 */ - ushort scc_char2; /* control character 2 */ - ushort scc_char3; /* control character 3 */ - ushort scc_char4; /* control character 4 */ - ushort scc_char5; /* control character 5 */ - ushort scc_char6; /* control character 6 */ - ushort scc_char7; /* control character 7 */ - ushort scc_char8; /* control character 8 */ - ushort scc_rccm; /* receive control character mask */ - ushort scc_rccr; /* receive control character register */ - ushort scc_rlbc; /* receive last break character */ -} scc_uart_t; - -/* SCC Event and Mask registers when it is used as a UART. -*/ -#define UART_SCCM_GLR ((ushort)0x1000) -#define UART_SCCM_GLT ((ushort)0x0800) -#define UART_SCCM_AB ((ushort)0x0200) -#define UART_SCCM_IDL ((ushort)0x0100) -#define UART_SCCM_GRA ((ushort)0x0080) -#define UART_SCCM_BRKE ((ushort)0x0040) -#define UART_SCCM_BRKS ((ushort)0x0020) -#define UART_SCCM_CCR ((ushort)0x0008) -#define UART_SCCM_BSY ((ushort)0x0004) -#define UART_SCCM_TX ((ushort)0x0002) -#define UART_SCCM_RX ((ushort)0x0001) - -/* The SCC PSMR when used as a UART. -*/ -#define SCU_PSMR_FLC ((ushort)0x8000) -#define SCU_PSMR_SL ((ushort)0x4000) -#define SCU_PSMR_CL ((ushort)0x3000) -#define SCU_PSMR_UM ((ushort)0x0c00) -#define SCU_PSMR_FRZ ((ushort)0x0200) -#define SCU_PSMR_RZS ((ushort)0x0100) -#define SCU_PSMR_SYN ((ushort)0x0080) -#define SCU_PSMR_DRT ((ushort)0x0040) -#define SCU_PSMR_PEN ((ushort)0x0010) -#define SCU_PSMR_RPM ((ushort)0x000c) -#define SCU_PSMR_REVP ((ushort)0x0008) -#define SCU_PSMR_TPM ((ushort)0x0003) -#define SCU_PSMR_TEVP ((ushort)0x0002) - -/* CPM Transparent mode SCC. - */ -typedef struct scc_trans { - sccp_t st_genscc; - uint st_cpres; /* Preset CRC */ - uint st_cmask; /* Constant mask for CRC */ -} scc_trans_t; - -/* How about some FCCs..... -*/ -#define FCC_GFMR_DIAG_NORM ((uint)0x00000000) -#define FCC_GFMR_DIAG_LE ((uint)0x40000000) -#define FCC_GFMR_DIAG_AE ((uint)0x80000000) -#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000) -#define FCC_GFMR_TCI ((uint)0x20000000) -#define FCC_GFMR_TRX ((uint)0x10000000) -#define FCC_GFMR_TTX ((uint)0x08000000) -#define FCC_GFMR_TTX ((uint)0x08000000) -#define FCC_GFMR_CDP ((uint)0x04000000) -#define FCC_GFMR_CTSP ((uint)0x02000000) -#define FCC_GFMR_CDS ((uint)0x01000000) -#define FCC_GFMR_CTSS ((uint)0x00800000) -#define FCC_GFMR_SYNL_NONE ((uint)0x00000000) -#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000) -#define FCC_GFMR_SYNL_8 ((uint)0x00008000) -#define FCC_GFMR_SYNL_16 ((uint)0x0000c000) -#define FCC_GFMR_RTSM ((uint)0x00002000) -#define FCC_GFMR_RENC_NRZ ((uint)0x00000000) -#define FCC_GFMR_RENC_NRZI ((uint)0x00000800) -#define FCC_GFMR_REVD ((uint)0x00000400) -#define FCC_GFMR_TENC_NRZ ((uint)0x00000000) -#define FCC_GFMR_TENC_NRZI ((uint)0x00000100) -#define FCC_GFMR_TCRC_16 ((uint)0x00000000) -#define FCC_GFMR_TCRC_32 ((uint)0x00000080) -#define FCC_GFMR_ENR ((uint)0x00000020) -#define FCC_GFMR_ENT ((uint)0x00000010) -#define FCC_GFMR_MODE_ENET ((uint)0x0000000c) -#define FCC_GFMR_MODE_ATM ((uint)0x0000000a) -#define FCC_GFMR_MODE_HDLC ((uint)0x00000000) - -/* Generic FCC parameter ram. -*/ -typedef struct fcc_param { - ushort fcc_riptr; /* Rx Internal temp pointer */ - ushort fcc_tiptr; /* Tx Internal temp pointer */ - ushort fcc_res1; - ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */ - uint fcc_rstate; /* Upper byte is Func code, must be set */ - uint fcc_rbase; /* Receive BD base */ - ushort fcc_rbdstat; /* RxBD status */ - ushort fcc_rbdlen; /* RxBD down counter */ - uint fcc_rdptr; /* RxBD internal data pointer */ - uint fcc_tstate; /* Upper byte is Func code, must be set */ - uint fcc_tbase; /* Transmit BD base */ - ushort fcc_tbdstat; /* TxBD status */ - ushort fcc_tbdlen; /* TxBD down counter */ - uint fcc_tdptr; /* TxBD internal data pointer */ - uint fcc_rbptr; /* Rx BD Internal buf pointer */ - uint fcc_tbptr; /* Tx BD Internal buf pointer */ - uint fcc_rcrc; /* Rx temp CRC */ - uint fcc_res2; - uint fcc_tcrc; /* Tx temp CRC */ -} fccp_t; - - -/* Ethernet controller through FCC. -*/ -typedef struct fcc_enet { - fccp_t fen_genfcc; - uint fen_statbuf; /* Internal status buffer */ - uint fen_camptr; /* CAM address */ - uint fen_cmask; /* Constant mask for CRC */ - uint fen_cpres; /* Preset CRC */ - uint fen_crcec; /* CRC Error counter */ - uint fen_alec; /* alignment error counter */ - uint fen_disfc; /* discard frame counter */ - ushort fen_retlim; /* Retry limit */ - ushort fen_retcnt; /* Retry counter */ - ushort fen_pper; /* Persistence */ - ushort fen_boffcnt; /* backoff counter */ - uint fen_gaddrh; /* Group address filter, high 32-bits */ - uint fen_gaddrl; /* Group address filter, low 32-bits */ - ushort fen_tfcstat; /* out of sequence TxBD */ - ushort fen_tfclen; - uint fen_tfcptr; - ushort fen_mflr; /* Maximum frame length (1518) */ - ushort fen_paddrh; /* MAC address */ - ushort fen_paddrm; - ushort fen_paddrl; - ushort fen_ibdcount; /* Internal BD counter */ - ushort fen_ibdstart; /* Internal BD start pointer */ - ushort fen_ibdend; /* Internal BD end pointer */ - ushort fen_txlen; /* Internal Tx frame length counter */ - uint fen_ibdbase[8]; /* Internal use */ - uint fen_iaddrh; /* Individual address filter */ - uint fen_iaddrl; - ushort fen_minflr; /* Minimum frame length (64) */ - ushort fen_taddrh; /* Filter transfer MAC address */ - ushort fen_taddrm; - ushort fen_taddrl; - ushort fen_padptr; /* Pointer to pad byte buffer */ - ushort fen_cftype; /* control frame type */ - ushort fen_cfrange; /* control frame range */ - ushort fen_maxb; /* maximum BD count */ - ushort fen_maxd1; /* Max DMA1 length (1520) */ - ushort fen_maxd2; /* Max DMA2 length (1520) */ - ushort fen_maxd; /* internal max DMA count */ - ushort fen_dmacnt; /* internal DMA counter */ - uint fen_octc; /* Total octect counter */ - uint fen_colc; /* Total collision counter */ - uint fen_broc; /* Total broadcast packet counter */ - uint fen_mulc; /* Total multicast packet count */ - uint fen_uspc; /* Total packets < 64 bytes */ - uint fen_frgc; /* Total packets < 64 bytes with errors */ - uint fen_ospc; /* Total packets > 1518 */ - uint fen_jbrc; /* Total packets > 1518 with errors */ - uint fen_p64c; /* Total packets == 64 bytes */ - uint fen_p65c; /* Total packets 64 < bytes <= 127 */ - uint fen_p128c; /* Total packets 127 < bytes <= 255 */ - uint fen_p256c; /* Total packets 256 < bytes <= 511 */ - uint fen_p512c; /* Total packets 512 < bytes <= 1023 */ - uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */ - uint fen_cambuf; /* Internal CAM buffer poiner */ - ushort fen_rfthr; /* Received frames threshold */ - ushort fen_rfcnt; /* Received frames count */ -} fcc_enet_t; - -/* FCC Event/Mask register as used by Ethernet. -*/ -#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */ -#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */ -#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */ -#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* FCC Mode Register (FPSMR) as used by Ethernet. -*/ -#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */ -#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */ -#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */ -#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */ -#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */ -#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */ -#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */ -#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */ -#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */ -#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */ -#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */ -#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */ -#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */ - -/* IIC parameter RAM. -*/ -typedef struct iic { - ushort iic_rbase; /* Rx Buffer descriptor base address */ - ushort iic_tbase; /* Tx Buffer descriptor base address */ - u_char iic_rfcr; /* Rx function code */ - u_char iic_tfcr; /* Tx function code */ - ushort iic_mrblr; /* Max receive buffer length */ - uint iic_rstate; /* Internal */ - uint iic_rdp; /* Internal */ - ushort iic_rbptr; /* Internal */ - ushort iic_rbc; /* Internal */ - uint iic_rxtmp; /* Internal */ - uint iic_tstate; /* Internal */ - uint iic_tdp; /* Internal */ - ushort iic_tbptr; /* Internal */ - ushort iic_tbc; /* Internal */ - uint iic_txtmp; /* Internal */ -} iic_t; - -/* SPI parameter RAM. -*/ -typedef struct spi { - ushort spi_rbase; /* Rx Buffer descriptor base address */ - ushort spi_tbase; /* Tx Buffer descriptor base address */ - u_char spi_rfcr; /* Rx function code */ - u_char spi_tfcr; /* Tx function code */ - ushort spi_mrblr; /* Max receive buffer length */ - uint spi_rstate; /* Internal */ - uint spi_rdp; /* Internal */ - ushort spi_rbptr; /* Internal */ - ushort spi_rbc; /* Internal */ - uint spi_rxtmp; /* Internal */ - uint spi_tstate; /* Internal */ - uint spi_tdp; /* Internal */ - ushort spi_tbptr; /* Internal */ - ushort spi_tbc; /* Internal */ - uint spi_txtmp; /* Internal */ - uint spi_res; /* Tx temp. */ - uint spi_res1[4]; /* SDMA temp. */ -} spi_t; - -/* SPI Mode register. -*/ -#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ -#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ -#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ -#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ -#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ -#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ -#define SPMODE_EN ((ushort)0x0100) /* Enable */ -#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ -#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ - -#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4) -#define SPMODE_PM(x) ((x) &0xF) - -#define SPI_EB ((u_char)0x10) /* big endian byte order */ - -/* IDMA parameter RAM -*/ -typedef struct idma { - ushort ibase; /* IDMA buffer descriptor table base address */ - ushort dcm; /* DMA channel mode */ - ushort ibdptr; /* IDMA current buffer descriptor pointer */ - ushort dpr_buf; /* IDMA transfer buffer base address */ - ushort buf_inv; /* internal buffer inventory */ - ushort ss_max; /* steady-state maximum transfer size */ - ushort dpr_in_ptr; /* write pointer inside the internal buffer */ - ushort sts; /* source transfer size */ - ushort dpr_out_ptr; /* read pointer inside the internal buffer */ - ushort seob; /* source end of burst */ - ushort deob; /* destination end of burst */ - ushort dts; /* destination transfer size */ - ushort ret_add; /* return address when working in ERM=1 mode */ - ushort res0; /* reserved */ - uint bd_cnt; /* internal byte count */ - uint s_ptr; /* source internal data pointer */ - uint d_ptr; /* destination internal data pointer */ - uint istate; /* internal state */ - u_char res1[20]; /* pad to 64-byte length */ -} idma_t; - -/* DMA channel mode bit fields -*/ -#define IDMA_DCM_FB ((ushort)0x8000) /* fly-by mode */ -#define IDMA_DCM_LP ((ushort)0x4000) /* low priority */ -#define IDMA_DCM_TC2 ((ushort)0x0400) /* value driven on TC[2] */ -#define IDMA_DCM_DMA_WRAP_MASK ((ushort)0x01c0) /* mask for DMA wrap */ -#define IDMA_DCM_DMA_WRAP_64 ((ushort)0x0000) /* 64-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_128 ((ushort)0x0040) /* 128-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_256 ((ushort)0x0080) /* 256-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_512 ((ushort)0x00c0) /* 512-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_1024 ((ushort)0x0100) /* 1024-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_2048 ((ushort)0x0140) /* 2048-byte DMA xfer buffer */ -#define IDMA_DCM_SINC ((ushort)0x0020) /* source inc addr */ -#define IDMA_DCM_DINC ((ushort)0x0010) /* destination inc addr */ -#define IDMA_DCM_ERM ((ushort)0x0008) /* external request mode */ -#define IDMA_DCM_DT ((ushort)0x0004) /* DONE treatment */ -#define IDMA_DCM_SD_MASK ((ushort)0x0003) /* mask for SD bit field */ -#define IDMA_DCM_SD_MEM2MEM ((ushort)0x0000) /* memory-to-memory xfer */ -#define IDMA_DCM_SD_PER2MEM ((ushort)0x0002) /* peripheral-to-memory xfer */ -#define IDMA_DCM_SD_MEM2PER ((ushort)0x0001) /* memory-to-peripheral xfer */ - -/* IDMA Buffer Descriptors -*/ -typedef struct idma_bd { - uint flags; - uint len; /* data length */ - uint src; /* source data buffer pointer */ - uint dst; /* destination data buffer pointer */ -} idma_bd_t; - -/* IDMA buffer descriptor flag bit fields -*/ -#define IDMA_BD_V ((uint)0x80000000) /* valid */ -#define IDMA_BD_W ((uint)0x20000000) /* wrap */ -#define IDMA_BD_I ((uint)0x10000000) /* interrupt */ -#define IDMA_BD_L ((uint)0x08000000) /* last */ -#define IDMA_BD_CM ((uint)0x02000000) /* continuous mode */ -#define IDMA_BD_SDN ((uint)0x00400000) /* source done */ -#define IDMA_BD_DDN ((uint)0x00200000) /* destination done */ -#define IDMA_BD_DGBL ((uint)0x00100000) /* destination global */ -#define IDMA_BD_DBO_LE ((uint)0x00040000) /* little-end dest byte order */ -#define IDMA_BD_DBO_BE ((uint)0x00080000) /* big-end dest byte order */ -#define IDMA_BD_DDTB ((uint)0x00010000) /* destination data bus */ -#define IDMA_BD_SGBL ((uint)0x00002000) /* source global */ -#define IDMA_BD_SBO_LE ((uint)0x00000800) /* little-end src byte order */ -#define IDMA_BD_SBO_BE ((uint)0x00001000) /* big-end src byte order */ -#define IDMA_BD_SDTB ((uint)0x00000200) /* source data bus */ - -/* per-channel IDMA registers -*/ -typedef struct im_idma { - u_char idsr; /* IDMAn event status register */ - u_char res0[3]; - u_char idmr; /* IDMAn event mask register */ - u_char res1[3]; -} im_idma_t; - -/* IDMA event register bit fields -*/ -#define IDMA_EVENT_SC ((unsigned char)0x08) /* stop completed */ -#define IDMA_EVENT_OB ((unsigned char)0x04) /* out of buffers */ -#define IDMA_EVENT_EDN ((unsigned char)0x02) /* external DONE asserted */ -#define IDMA_EVENT_BC ((unsigned char)0x01) /* buffer descriptor complete */ - -/* RISC Controller Configuration Register (RCCR) bit fields -*/ -#define RCCR_TIME ((uint)0x80000000) /* timer enable */ -#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */ -#define RCCR_DR0M ((uint)0x00800000) /* IDMA0 request mode */ -#define RCCR_DR1M ((uint)0x00400000) /* IDMA1 request mode */ -#define RCCR_DR2M ((uint)0x00000080) /* IDMA2 request mode */ -#define RCCR_DR3M ((uint)0x00000040) /* IDMA3 request mode */ -#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */ -#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */ -#define RCCR_DR0QP_MED ((uint)0x00100000) /* IDMA0 has medium req priority */ -#define RCCR_DR0QP_LOW ((uint)0x00200000) /* IDMA0 has low req priority */ -#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */ -#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */ -#define RCCR_DR1QP_MED ((uint)0x00010000) /* IDMA1 has medium req priority */ -#define RCCR_DR1QP_LOW ((uint)0x00020000) /* IDMA1 has low req priority */ -#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */ -#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */ -#define RCCR_DR2QP_MED ((uint)0x00000010) /* IDMA2 has medium req priority */ -#define RCCR_DR2QP_LOW ((uint)0x00000020) /* IDMA2 has low req priority */ -#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */ -#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */ -#define RCCR_DR3QP_MED ((uint)0x00000001) /* IDMA3 has medium req priority */ -#define RCCR_DR3QP_LOW ((uint)0x00000002) /* IDMA3 has low req priority */ -#define RCCR_EIE ((uint)0x00080000) /* external interrupt enable */ -#define RCCR_SCD ((uint)0x00040000) /* scheduler configuration */ -#define RCCR_ERAM_MASK ((uint)0x0000e000) /* mask for enable RAM microcode */ -#define RCCR_ERAM_0KB ((uint)0x00000000) /* use 0KB of dpram for microcode */ -#define RCCR_ERAM_2KB ((uint)0x00002000) /* use 2KB of dpram for microcode */ -#define RCCR_ERAM_4KB ((uint)0x00004000) /* use 4KB of dpram for microcode */ -#define RCCR_ERAM_6KB ((uint)0x00006000) /* use 6KB of dpram for microcode */ -#define RCCR_ERAM_8KB ((uint)0x00008000) /* use 8KB of dpram for microcode */ -#define RCCR_ERAM_10KB ((uint)0x0000a000) /* use 10KB of dpram for microcode */ -#define RCCR_ERAM_12KB ((uint)0x0000c000) /* use 12KB of dpram for microcode */ -#define RCCR_EDM0 ((uint)0x00000800) /* DREQ0 edge detect mode */ -#define RCCR_EDM1 ((uint)0x00000400) /* DREQ1 edge detect mode */ -#define RCCR_EDM2 ((uint)0x00000200) /* DREQ2 edge detect mode */ -#define RCCR_EDM3 ((uint)0x00000100) /* DREQ3 edge detect mode */ -#define RCCR_DEM01 ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */ -#define RCCR_DEM23 ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */ - -/*----------------------------------------------------------------------- - * CMXFCR - CMX FCC Clock Route Register - */ -#define CMXFCR_FC1 0x40000000 /* FCC1 connection */ -#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */ -#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */ -#define CMXFCR_FC2 0x00400000 /* FCC2 connection */ -#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */ -#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */ -#define CMXFCR_FC3 0x00004000 /* FCC3 connection */ -#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */ -#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */ - -#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */ -#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */ -#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */ -#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */ -#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */ -#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */ -#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */ -#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */ - -#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */ -#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */ -#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */ -#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */ -#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */ -#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */ -#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */ -#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */ - -#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */ -#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */ -#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */ -#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */ -#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */ -#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */ -#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */ -#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */ - -#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */ -#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */ -#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */ -#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */ -#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */ -#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */ -#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */ -#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */ - -#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */ -#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */ -#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */ -#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */ -#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */ -#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */ -#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */ -#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */ - -#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */ -#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */ -#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */ -#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */ -#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */ -#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */ -#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */ -#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */ - -/*----------------------------------------------------------------------- - * CMXSCR - CMX SCC Clock Route Register - */ -#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */ -#define CMXSCR_SC1 0x40000000 /* SCC1 connection */ -#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */ -#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */ -#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */ -#define CMXSCR_SC2 0x00400000 /* SCC2 connection */ -#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */ -#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */ -#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */ -#define CMXSCR_SC3 0x00004000 /* SCC3 connection */ -#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */ -#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */ -#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */ -#define CMXSCR_SC4 0x00000040 /* SCC4 connection */ -#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */ -#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */ - -#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */ -#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */ -#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */ -#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */ -#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */ -#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */ -#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */ -#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */ - -#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */ -#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */ -#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */ -#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */ -#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */ -#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */ -#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */ -#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */ - -#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */ -#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */ -#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */ -#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */ -#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */ -#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */ -#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */ -#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */ - -#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */ -#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */ -#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */ -#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */ -#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */ -#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */ -#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */ -#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */ - -#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */ -#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */ -#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */ -#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */ -#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */ -#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */ -#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */ -#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */ - -#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */ -#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */ -#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */ -#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */ -#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */ -#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */ -#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */ -#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */ - -#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */ -#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */ -#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */ -#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */ -#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */ -#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */ -#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */ -#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */ - -#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */ -#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */ -#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */ -#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */ -#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */ -#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */ -#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */ -#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */ - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration Register 4-31 - */ -#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */ -#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */ -#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */ -#define SIUMCR_CDIS 0x10000000 /* Core Disable */ -#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/ -#define SIUMCR_DPPC01 0x04000000 /* - " - */ -#define SIUMCR_DPPC10 0x08000000 /* - " - */ -#define SIUMCR_DPPC11 0x0c000000 /* - " - */ -#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */ -#define SIUMCR_L2CPC01 0x01000000 /* - " - */ -#define SIUMCR_L2CPC10 0x02000000 /* - " - */ -#define SIUMCR_L2CPC11 0x03000000 /* - " - */ -#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */ -#define SIUMCR_LBPC01 0x00400000 /* - " - */ -#define SIUMCR_LBPC10 0x00800000 /* - " - */ -#define SIUMCR_LBPC11 0x00c00000 /* - " - */ -#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/ -#define SIUMCR_APPC01 0x00100000 /* - " - */ -#define SIUMCR_APPC10 0x00200000 /* - " - */ -#define SIUMCR_APPC11 0x00300000 /* - " - */ -#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */ -#define SIUMCR_CS10PC01 0x00040000 /* - " - */ -#define SIUMCR_CS10PC10 0x00080000 /* - " - */ -#define SIUMCR_CS10PC11 0x000c0000 /* - " - */ -#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */ -#define SIUMCR_BCTLC01 0x00010000 /* - " - */ -#define SIUMCR_BCTLC10 0x00020000 /* - " - */ -#define SIUMCR_BCTLC11 0x00030000 /* - " - */ -#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */ -#define SIUMCR_MMR01 0x00004000 /* - " - */ -#define SIUMCR_MMR10 0x00008000 /* - " - */ -#define SIUMCR_MMR11 0x0000c000 /* - " - */ -#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/ - -/*----------------------------------------------------------------------- - * SCCR - System Clock Control Register 9-8 -*/ -#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */ -#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */ -#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */ -#define SCCR_PCIDF_SHIFT 3 - -#ifndef CPM_IMMR_OFFSET -#define CPM_IMMR_OFFSET 0x101a8 -#endif - -#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ - -/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK - * in order to use clock-computing stuff below for the FCC x - */ - -/* Automatically generates register configurations */ -#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ - -#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ -#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ -#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ -#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ -#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ -#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ - -#define PC_F1RXCLK PC_CLK(F1_RXCLK) -#define PC_F1TXCLK PC_CLK(F1_TXCLK) -#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) -#define CMX1_CLK_MASK ((uint)0xff000000) - -#define PC_F2RXCLK PC_CLK(F2_RXCLK) -#define PC_F2TXCLK PC_CLK(F2_TXCLK) -#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) -#define CMX2_CLK_MASK ((uint)0x00ff0000) - -#define PC_F3RXCLK PC_CLK(F3_RXCLK) -#define PC_F3TXCLK PC_CLK(F3_TXCLK) -#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) -#define CMX3_CLK_MASK ((uint)0x0000ff00) - -#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK) -#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE) - -#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK) - -/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PA1_COL 0x00000001U -#define PA1_CRS 0x00000002U -#define PA1_TXER 0x00000004U -#define PA1_TXEN 0x00000008U -#define PA1_RXDV 0x00000010U -#define PA1_RXER 0x00000020U -#define PA1_TXDAT 0x00003c00U -#define PA1_RXDAT 0x0003c000U -#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) -#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ - PA1_RXDV | PA1_RXER) -#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) -#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) - - -/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PB2_TXER 0x00000001U -#define PB2_RXDV 0x00000002U -#define PB2_TXEN 0x00000004U -#define PB2_RXER 0x00000008U -#define PB2_COL 0x00000010U -#define PB2_CRS 0x00000020U -#define PB2_TXDAT 0x000003c0U -#define PB2_RXDAT 0x00003c00U -#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ - PB2_RXER | PB2_RXDV | PB2_TXER) -#define PB2_PSORB1 (PB2_TXEN) -#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) -#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) - - -/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PB3_RXDV 0x00004000U -#define PB3_RXER 0x00008000U -#define PB3_TXER 0x00010000U -#define PB3_TXEN 0x00020000U -#define PB3_COL 0x00040000U -#define PB3_CRS 0x00080000U -#define PB3_TXDAT 0x0f000000U -#define PC3_TXDAT 0x00000010U -#define PB3_RXDAT 0x00f00000U -#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ - PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) -#define PB3_PSORB1 0 -#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) -#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) -#define PC3_DIRC1 (PC3_TXDAT) - -/* Handy macro to specify mem for FCCs*/ -#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) -#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) -#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) -#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2) - -/* Clocks and GRG's */ - -enum cpm_clk_dir { - CPM_CLK_RX, - CPM_CLK_TX, - CPM_CLK_RTX -}; - -enum cpm_clk_target { - CPM_CLK_SCC1, - CPM_CLK_SCC2, - CPM_CLK_SCC3, - CPM_CLK_SCC4, - CPM_CLK_FCC1, - CPM_CLK_FCC2, - CPM_CLK_FCC3, - CPM_CLK_SMC1, - CPM_CLK_SMC2, -}; - -enum cpm_clk { - CPM_CLK_NONE = 0, - CPM_BRG1, /* Baud Rate Generator 1 */ - CPM_BRG2, /* Baud Rate Generator 2 */ - CPM_BRG3, /* Baud Rate Generator 3 */ - CPM_BRG4, /* Baud Rate Generator 4 */ - CPM_BRG5, /* Baud Rate Generator 5 */ - CPM_BRG6, /* Baud Rate Generator 6 */ - CPM_BRG7, /* Baud Rate Generator 7 */ - CPM_BRG8, /* Baud Rate Generator 8 */ - CPM_CLK1, /* Clock 1 */ - CPM_CLK2, /* Clock 2 */ - CPM_CLK3, /* Clock 3 */ - CPM_CLK4, /* Clock 4 */ - CPM_CLK5, /* Clock 5 */ - CPM_CLK6, /* Clock 6 */ - CPM_CLK7, /* Clock 7 */ - CPM_CLK8, /* Clock 8 */ - CPM_CLK9, /* Clock 9 */ - CPM_CLK10, /* Clock 10 */ - CPM_CLK11, /* Clock 11 */ - CPM_CLK12, /* Clock 12 */ - CPM_CLK13, /* Clock 13 */ - CPM_CLK14, /* Clock 14 */ - CPM_CLK15, /* Clock 15 */ - CPM_CLK16, /* Clock 16 */ - CPM_CLK17, /* Clock 17 */ - CPM_CLK18, /* Clock 18 */ - CPM_CLK19, /* Clock 19 */ - CPM_CLK20, /* Clock 20 */ - CPM_CLK_DUMMY -}; - -extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode); -extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock); - -#define CPM_PIN_INPUT 0 -#define CPM_PIN_OUTPUT 1 -#define CPM_PIN_PRIMARY 0 -#define CPM_PIN_SECONDARY 2 -#define CPM_PIN_GPIO 4 -#define CPM_PIN_OPENDRAIN 8 - -void cpm2_set_pin(int port, int pin, int flags); - -#endif /* __CPM2__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h deleted file mode 100644 index ef8a248dfd55..000000000000 --- a/include/asm-powerpc/cputable.h +++ /dev/null @@ -1,514 +0,0 @@ -#ifndef __ASM_POWERPC_CPUTABLE_H -#define __ASM_POWERPC_CPUTABLE_H - -#define PPC_FEATURE_32 0x80000000 -#define PPC_FEATURE_64 0x40000000 -#define PPC_FEATURE_601_INSTR 0x20000000 -#define PPC_FEATURE_HAS_ALTIVEC 0x10000000 -#define PPC_FEATURE_HAS_FPU 0x08000000 -#define PPC_FEATURE_HAS_MMU 0x04000000 -#define PPC_FEATURE_HAS_4xxMAC 0x02000000 -#define PPC_FEATURE_UNIFIED_CACHE 0x01000000 -#define PPC_FEATURE_HAS_SPE 0x00800000 -#define PPC_FEATURE_HAS_EFP_SINGLE 0x00400000 -#define PPC_FEATURE_HAS_EFP_DOUBLE 0x00200000 -#define PPC_FEATURE_NO_TB 0x00100000 -#define PPC_FEATURE_POWER4 0x00080000 -#define PPC_FEATURE_POWER5 0x00040000 -#define PPC_FEATURE_POWER5_PLUS 0x00020000 -#define PPC_FEATURE_CELL 0x00010000 -#define PPC_FEATURE_BOOKE 0x00008000 -#define PPC_FEATURE_SMT 0x00004000 -#define PPC_FEATURE_ICACHE_SNOOP 0x00002000 -#define PPC_FEATURE_ARCH_2_05 0x00001000 -#define PPC_FEATURE_PA6T 0x00000800 -#define PPC_FEATURE_HAS_DFP 0x00000400 -#define PPC_FEATURE_POWER6_EXT 0x00000200 -#define PPC_FEATURE_ARCH_2_06 0x00000100 -#define PPC_FEATURE_HAS_VSX 0x00000080 - -#define PPC_FEATURE_PSERIES_PERFMON_COMPAT \ - 0x00000040 - -#define PPC_FEATURE_TRUE_LE 0x00000002 -#define PPC_FEATURE_PPC_LE 0x00000001 - -#ifdef __KERNEL__ - -#include -#include - -#ifndef __ASSEMBLY__ - -/* This structure can grow, it's real size is used by head.S code - * via the mkdefs mechanism. - */ -struct cpu_spec; - -typedef void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec); -typedef void (*cpu_restore_t)(void); - -enum powerpc_oprofile_type { - PPC_OPROFILE_INVALID = 0, - PPC_OPROFILE_RS64 = 1, - PPC_OPROFILE_POWER4 = 2, - PPC_OPROFILE_G4 = 3, - PPC_OPROFILE_FSL_EMB = 4, - PPC_OPROFILE_CELL = 5, - PPC_OPROFILE_PA6T = 6, -}; - -enum powerpc_pmc_type { - PPC_PMC_DEFAULT = 0, - PPC_PMC_IBM = 1, - PPC_PMC_PA6T = 2, -}; - -struct pt_regs; - -extern int machine_check_generic(struct pt_regs *regs); -extern int machine_check_4xx(struct pt_regs *regs); -extern int machine_check_440A(struct pt_regs *regs); -extern int machine_check_e500(struct pt_regs *regs); -extern int machine_check_e200(struct pt_regs *regs); - -/* NOTE WELL: Update identify_cpu() if fields are added or removed! */ -struct cpu_spec { - /* CPU is matched via (PVR & pvr_mask) == pvr_value */ - unsigned int pvr_mask; - unsigned int pvr_value; - - char *cpu_name; - unsigned long cpu_features; /* Kernel features */ - unsigned int cpu_user_features; /* Userland features */ - - /* cache line sizes */ - unsigned int icache_bsize; - unsigned int dcache_bsize; - - /* number of performance monitor counters */ - unsigned int num_pmcs; - enum powerpc_pmc_type pmc_type; - - /* this is called to initialize various CPU bits like L1 cache, - * BHT, SPD, etc... from head.S before branching to identify_machine - */ - cpu_setup_t cpu_setup; - /* Used to restore cpu setup on secondary processors and at resume */ - cpu_restore_t cpu_restore; - - /* Used by oprofile userspace to select the right counters */ - char *oprofile_cpu_type; - - /* Processor specific oprofile operations */ - enum powerpc_oprofile_type oprofile_type; - - /* Bit locations inside the mmcra change */ - unsigned long oprofile_mmcra_sihv; - unsigned long oprofile_mmcra_sipr; - - /* Bits to clear during an oprofile exception */ - unsigned long oprofile_mmcra_clear; - - /* Name of processor class, for the ELF AT_PLATFORM entry */ - char *platform; - - /* Processor specific machine check handling. Return negative - * if the error is fatal, 1 if it was fully recovered and 0 to - * pass up (not CPU originated) */ - int (*machine_check)(struct pt_regs *regs); -}; - -extern struct cpu_spec *cur_cpu_spec; - -extern unsigned int __start___ftr_fixup, __stop___ftr_fixup; - -extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr); -extern void do_feature_fixups(unsigned long value, void *fixup_start, - void *fixup_end); - -extern const char *powerpc_base_platform; - -#endif /* __ASSEMBLY__ */ - -/* CPU kernel features */ - -/* Retain the 32b definitions all use bottom half of word */ -#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x0000000000000001) -#define CPU_FTR_L2CR ASM_CONST(0x0000000000000002) -#define CPU_FTR_SPEC7450 ASM_CONST(0x0000000000000004) -#define CPU_FTR_ALTIVEC ASM_CONST(0x0000000000000008) -#define CPU_FTR_TAU ASM_CONST(0x0000000000000010) -#define CPU_FTR_CAN_DOZE ASM_CONST(0x0000000000000020) -#define CPU_FTR_USE_TB ASM_CONST(0x0000000000000040) -#define CPU_FTR_L2CSR ASM_CONST(0x0000000000000080) -#define CPU_FTR_601 ASM_CONST(0x0000000000000100) -#define CPU_FTR_HPTE_TABLE ASM_CONST(0x0000000000000200) -#define CPU_FTR_CAN_NAP ASM_CONST(0x0000000000000400) -#define CPU_FTR_L3CR ASM_CONST(0x0000000000000800) -#define CPU_FTR_L3_DISABLE_NAP ASM_CONST(0x0000000000001000) -#define CPU_FTR_NAP_DISABLE_L2_PR ASM_CONST(0x0000000000002000) -#define CPU_FTR_DUAL_PLL_750FX ASM_CONST(0x0000000000004000) -#define CPU_FTR_NO_DPM ASM_CONST(0x0000000000008000) -#define CPU_FTR_HAS_HIGH_BATS ASM_CONST(0x0000000000010000) -#define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000) -#define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000) -#define CPU_FTR_BIG_PHYS ASM_CONST(0x0000000000080000) -#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000) -#define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000) -#define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000) -#define CPU_FTR_FPU_UNAVAILABLE ASM_CONST(0x0000000000800000) -#define CPU_FTR_UNIFIED_ID_CACHE ASM_CONST(0x0000000001000000) -#define CPU_FTR_SPE ASM_CONST(0x0000000002000000) -#define CPU_FTR_NEED_PAIRED_STWCX ASM_CONST(0x0000000004000000) -#define CPU_FTR_LWSYNC ASM_CONST(0x0000000008000000) - -/* - * Add the 64-bit processor unique features in the top half of the word; - * on 32-bit, make the names available but defined to be 0. - */ -#ifdef __powerpc64__ -#define LONG_ASM_CONST(x) ASM_CONST(x) -#else -#define LONG_ASM_CONST(x) 0 -#endif - -#define CPU_FTR_SLB LONG_ASM_CONST(0x0000000100000000) -#define CPU_FTR_16M_PAGE LONG_ASM_CONST(0x0000000200000000) -#define CPU_FTR_TLBIEL LONG_ASM_CONST(0x0000000400000000) -#define CPU_FTR_NOEXECUTE LONG_ASM_CONST(0x0000000800000000) -#define CPU_FTR_IABR LONG_ASM_CONST(0x0000002000000000) -#define CPU_FTR_MMCRA LONG_ASM_CONST(0x0000004000000000) -#define CPU_FTR_CTRL LONG_ASM_CONST(0x0000008000000000) -#define CPU_FTR_SMT LONG_ASM_CONST(0x0000010000000000) -#define CPU_FTR_LOCKLESS_TLBIE LONG_ASM_CONST(0x0000040000000000) -#define CPU_FTR_CI_LARGE_PAGE LONG_ASM_CONST(0x0000100000000000) -#define CPU_FTR_PAUSE_ZERO LONG_ASM_CONST(0x0000200000000000) -#define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000) -#define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000800000000000) -#define CPU_FTR_SPURR LONG_ASM_CONST(0x0001000000000000) -#define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000) -#define CPU_FTR_1T_SEGMENT LONG_ASM_CONST(0x0004000000000000) -#define CPU_FTR_NO_SLBIE_B LONG_ASM_CONST(0x0008000000000000) -#define CPU_FTR_VSX LONG_ASM_CONST(0x0010000000000000) -#define CPU_FTR_SAO LONG_ASM_CONST(0x0020000000000000) - -#ifndef __ASSEMBLY__ - -#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_SLB | \ - CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \ - CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE) - -/* We only set the altivec features if the kernel was compiled with altivec - * support - */ -#ifdef CONFIG_ALTIVEC -#define CPU_FTR_ALTIVEC_COMP CPU_FTR_ALTIVEC -#define PPC_FEATURE_HAS_ALTIVEC_COMP PPC_FEATURE_HAS_ALTIVEC -#else -#define CPU_FTR_ALTIVEC_COMP 0 -#define PPC_FEATURE_HAS_ALTIVEC_COMP 0 -#endif - -/* We only set the VSX features if the kernel was compiled with VSX - * support - */ -#ifdef CONFIG_VSX -#define CPU_FTR_VSX_COMP CPU_FTR_VSX -#define PPC_FEATURE_HAS_VSX_COMP PPC_FEATURE_HAS_VSX -#else -#define CPU_FTR_VSX_COMP 0 -#define PPC_FEATURE_HAS_VSX_COMP 0 -#endif - -/* We only set the spe features if the kernel was compiled with spe - * support - */ -#ifdef CONFIG_SPE -#define CPU_FTR_SPE_COMP CPU_FTR_SPE -#define PPC_FEATURE_HAS_SPE_COMP PPC_FEATURE_HAS_SPE -#define PPC_FEATURE_HAS_EFP_SINGLE_COMP PPC_FEATURE_HAS_EFP_SINGLE -#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP PPC_FEATURE_HAS_EFP_DOUBLE -#else -#define CPU_FTR_SPE_COMP 0 -#define PPC_FEATURE_HAS_SPE_COMP 0 -#define PPC_FEATURE_HAS_EFP_SINGLE_COMP 0 -#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP 0 -#endif - -/* We need to mark all pages as being coherent if we're SMP or we have a - * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II - * require it for PCI "streaming/prefetch" to work properly. - */ -#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \ - || defined(CONFIG_PPC_83xx) || defined(CONFIG_8260) -#define CPU_FTR_COMMON CPU_FTR_NEED_COHERENT -#else -#define CPU_FTR_COMMON 0 -#endif - -/* The powersave features NAP & DOZE seems to confuse BDI when - debugging. So if a BDI is used, disable theses - */ -#ifndef CONFIG_BDI_SWITCH -#define CPU_FTR_MAYBE_CAN_DOZE CPU_FTR_CAN_DOZE -#define CPU_FTR_MAYBE_CAN_NAP CPU_FTR_CAN_NAP -#else -#define CPU_FTR_MAYBE_CAN_DOZE 0 -#define CPU_FTR_MAYBE_CAN_NAP 0 -#endif - -#define CLASSIC_PPC (!defined(CONFIG_8xx) && !defined(CONFIG_4xx) && \ - !defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \ - !defined(CONFIG_BOOKE)) - -#define CPU_FTRS_PPC601 (CPU_FTR_COMMON | CPU_FTR_601 | CPU_FTR_HPTE_TABLE | \ - CPU_FTR_COHERENT_ICACHE | CPU_FTR_UNIFIED_ID_CACHE) -#define CPU_FTRS_603 (CPU_FTR_COMMON | \ - CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) -#define CPU_FTRS_604 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPC_LE) -#define CPU_FTRS_740_NOTAU (CPU_FTR_COMMON | \ - CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) -#define CPU_FTRS_740 (CPU_FTR_COMMON | \ - CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ - CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \ - CPU_FTR_PPC_LE) -#define CPU_FTRS_750 (CPU_FTR_COMMON | \ - CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ - CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \ - CPU_FTR_PPC_LE) -#define CPU_FTRS_750CL (CPU_FTRS_750 | CPU_FTR_HAS_HIGH_BATS) -#define CPU_FTRS_750FX1 (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM) -#define CPU_FTRS_750FX2 (CPU_FTRS_750 | CPU_FTR_NO_DPM) -#define CPU_FTRS_750FX (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | \ - CPU_FTR_HAS_HIGH_BATS) -#define CPU_FTRS_750GX (CPU_FTRS_750FX) -#define CPU_FTRS_7400_NOTAU (CPU_FTR_COMMON | \ - CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ - CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) -#define CPU_FTRS_7400 (CPU_FTR_COMMON | \ - CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ - CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) -#define CPU_FTRS_7450_20 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) -#define CPU_FTRS_7450_21 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) -#define CPU_FTRS_7450_23 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE) -#define CPU_FTRS_7455_1 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \ - CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE) -#define CPU_FTRS_7455_20 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_HAS_HIGH_BATS | CPU_FTR_PPC_LE) -#define CPU_FTRS_7455 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) -#define CPU_FTRS_7447_10 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC | CPU_FTR_PPC_LE | \ - CPU_FTR_NEED_PAIRED_STWCX) -#define CPU_FTRS_7447 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) -#define CPU_FTRS_7447A (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) -#define CPU_FTRS_7448 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) -#define CPU_FTRS_82XX (CPU_FTR_COMMON | \ - CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB) -#define CPU_FTRS_G2_LE (CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \ - CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS) -#define CPU_FTRS_E300 (CPU_FTR_MAYBE_CAN_DOZE | \ - CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_COMMON) -#define CPU_FTRS_E300C2 (CPU_FTR_MAYBE_CAN_DOZE | \ - CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE) -#define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE) -#define CPU_FTRS_8XX (CPU_FTR_USE_TB) -#define CPU_FTRS_40X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN) -#define CPU_FTRS_44X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN) -#define CPU_FTRS_E200 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \ - CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \ - CPU_FTR_UNIFIED_ID_CACHE) -#define CPU_FTRS_E500 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ - CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN) -#define CPU_FTRS_E500_2 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ - CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | \ - CPU_FTR_NODSISRALIGN) -#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN | \ - CPU_FTR_L2CSR | CPU_FTR_LWSYNC) -#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN) - -/* 64-bit CPUs */ -#define CPU_FTRS_POWER3 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | CPU_FTR_PPC_LE) -#define CPU_FTRS_RS64 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | \ - CPU_FTR_MMCRA | CPU_FTR_CTRL) -#define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ - CPU_FTR_MMCRA) -#define CPU_FTRS_PPC970 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ - CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA) -#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ - CPU_FTR_MMCRA | CPU_FTR_SMT | \ - CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ - CPU_FTR_PURR) -#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ - CPU_FTR_MMCRA | CPU_FTR_SMT | \ - CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ - CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ - CPU_FTR_DSCR) -#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ - CPU_FTR_MMCRA | CPU_FTR_SMT | \ - CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ - CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ - CPU_FTR_DSCR | CPU_FTR_SAO) -#define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ - CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ - CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_CELL_TB_BUG) -#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \ - CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \ - CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B) -#define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2) - -#ifdef __powerpc64__ -#define CPU_FTRS_POSSIBLE \ - (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \ - CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \ - CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \ - CPU_FTR_1T_SEGMENT | CPU_FTR_VSX) -#else -enum { - CPU_FTRS_POSSIBLE = -#if CLASSIC_PPC - CPU_FTRS_PPC601 | CPU_FTRS_603 | CPU_FTRS_604 | CPU_FTRS_740_NOTAU | - CPU_FTRS_740 | CPU_FTRS_750 | CPU_FTRS_750FX1 | - CPU_FTRS_750FX2 | CPU_FTRS_750FX | CPU_FTRS_750GX | - CPU_FTRS_7400_NOTAU | CPU_FTRS_7400 | CPU_FTRS_7450_20 | - CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 | - CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 | - CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX | - CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 | - CPU_FTRS_CLASSIC32 | -#else - CPU_FTRS_GENERIC_32 | -#endif -#ifdef CONFIG_8xx - CPU_FTRS_8XX | -#endif -#ifdef CONFIG_40x - CPU_FTRS_40X | -#endif -#ifdef CONFIG_44x - CPU_FTRS_44X | -#endif -#ifdef CONFIG_E200 - CPU_FTRS_E200 | -#endif -#ifdef CONFIG_E500 - CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC | -#endif - 0, -}; -#endif /* __powerpc64__ */ - -#ifdef __powerpc64__ -#define CPU_FTRS_ALWAYS \ - (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \ - CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \ - CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE) -#else -enum { - CPU_FTRS_ALWAYS = -#if CLASSIC_PPC - CPU_FTRS_PPC601 & CPU_FTRS_603 & CPU_FTRS_604 & CPU_FTRS_740_NOTAU & - CPU_FTRS_740 & CPU_FTRS_750 & CPU_FTRS_750FX1 & - CPU_FTRS_750FX2 & CPU_FTRS_750FX & CPU_FTRS_750GX & - CPU_FTRS_7400_NOTAU & CPU_FTRS_7400 & CPU_FTRS_7450_20 & - CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 & - CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 & - CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX & - CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 & - CPU_FTRS_CLASSIC32 & -#else - CPU_FTRS_GENERIC_32 & -#endif -#ifdef CONFIG_8xx - CPU_FTRS_8XX & -#endif -#ifdef CONFIG_40x - CPU_FTRS_40X & -#endif -#ifdef CONFIG_44x - CPU_FTRS_44X & -#endif -#ifdef CONFIG_E200 - CPU_FTRS_E200 & -#endif -#ifdef CONFIG_E500 - CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC & -#endif - CPU_FTRS_POSSIBLE, -}; -#endif /* __powerpc64__ */ - -static inline int cpu_has_feature(unsigned long feature) -{ - return (CPU_FTRS_ALWAYS & feature) || - (CPU_FTRS_POSSIBLE - & cur_cpu_spec->cpu_features - & feature); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_CPUTABLE_H */ diff --git a/include/asm-powerpc/cputhreads.h b/include/asm-powerpc/cputhreads.h deleted file mode 100644 index fb11b0c459b8..000000000000 --- a/include/asm-powerpc/cputhreads.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef _ASM_POWERPC_CPUTHREADS_H -#define _ASM_POWERPC_CPUTHREADS_H - -#include - -/* - * Mapping of threads to cores - */ - -#ifdef CONFIG_SMP -extern int threads_per_core; -extern int threads_shift; -extern cpumask_t threads_core_mask; -#else -#define threads_per_core 1 -#define threads_shift 0 -#define threads_core_mask (CPU_MASK_CPU0) -#endif - -/* cpu_thread_mask_to_cores - Return a cpumask of one per cores - * hit by the argument - * - * @threads: a cpumask of threads - * - * This function returns a cpumask which will have one "cpu" (or thread) - * bit set for each core that has at least one thread set in the argument. - * - * This can typically be used for things like IPI for tlb invalidations - * since those need to be done only once per core/TLB - */ -static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads) -{ - cpumask_t tmp, res; - int i; - - res = CPU_MASK_NONE; - for (i = 0; i < NR_CPUS; i += threads_per_core) { - cpus_shift_left(tmp, threads_core_mask, i); - if (cpus_intersects(threads, tmp)) - cpu_set(i, res); - } - return res; -} - -static inline int cpu_nr_cores(void) -{ - return NR_CPUS >> threads_shift; -} - -static inline cpumask_t cpu_online_cores_map(void) -{ - return cpu_thread_mask_to_cores(cpu_online_map); -} - -static inline int cpu_thread_to_core(int cpu) -{ - return cpu >> threads_shift; -} - -static inline int cpu_thread_in_core(int cpu) -{ - return cpu & (threads_per_core - 1); -} - -static inline int cpu_first_thread_in_core(int cpu) -{ - return cpu & ~(threads_per_core - 1); -} - -#endif /* _ASM_POWERPC_CPUTHREADS_H */ - diff --git a/include/asm-powerpc/cputime.h b/include/asm-powerpc/cputime.h deleted file mode 100644 index f42e623030ee..000000000000 --- a/include/asm-powerpc/cputime.h +++ /dev/null @@ -1,235 +0,0 @@ -/* - * Definitions for measuring cputime on powerpc machines. - * - * Copyright (C) 2006 Paul Mackerras, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in - * the same units as the timebase. Otherwise we measure cpu time - * in jiffies using the generic definitions. - */ - -#ifndef __POWERPC_CPUTIME_H -#define __POWERPC_CPUTIME_H - -#ifndef CONFIG_VIRT_CPU_ACCOUNTING -#include -#else - -#include -#include -#include -#include -#include - -typedef u64 cputime_t; -typedef u64 cputime64_t; - -#define cputime_zero ((cputime_t)0) -#define cputime_max ((~((cputime_t)0) >> 1) - 1) -#define cputime_add(__a, __b) ((__a) + (__b)) -#define cputime_sub(__a, __b) ((__a) - (__b)) -#define cputime_div(__a, __n) ((__a) / (__n)) -#define cputime_halve(__a) ((__a) >> 1) -#define cputime_eq(__a, __b) ((__a) == (__b)) -#define cputime_gt(__a, __b) ((__a) > (__b)) -#define cputime_ge(__a, __b) ((__a) >= (__b)) -#define cputime_lt(__a, __b) ((__a) < (__b)) -#define cputime_le(__a, __b) ((__a) <= (__b)) - -#define cputime64_zero ((cputime64_t)0) -#define cputime64_add(__a, __b) ((__a) + (__b)) -#define cputime64_sub(__a, __b) ((__a) - (__b)) -#define cputime_to_cputime64(__ct) (__ct) - -#ifdef __KERNEL__ - -/* - * Convert cputime <-> jiffies - */ -extern u64 __cputime_jiffies_factor; -DECLARE_PER_CPU(unsigned long, cputime_last_delta); -DECLARE_PER_CPU(unsigned long, cputime_scaled_last_delta); - -static inline unsigned long cputime_to_jiffies(const cputime_t ct) -{ - return mulhdu(ct, __cputime_jiffies_factor); -} - -/* Estimate the scaled cputime by scaling the real cputime based on - * the last scaled to real ratio */ -static inline cputime_t cputime_to_scaled(const cputime_t ct) -{ - if (cpu_has_feature(CPU_FTR_SPURR) && - per_cpu(cputime_last_delta, smp_processor_id())) - return ct * - per_cpu(cputime_scaled_last_delta, smp_processor_id())/ - per_cpu(cputime_last_delta, smp_processor_id()); - return ct; -} - -static inline cputime_t jiffies_to_cputime(const unsigned long jif) -{ - cputime_t ct; - unsigned long sec; - - /* have to be a little careful about overflow */ - ct = jif % HZ; - sec = jif / HZ; - if (ct) { - ct *= tb_ticks_per_sec; - do_div(ct, HZ); - } - if (sec) - ct += (cputime_t) sec * tb_ticks_per_sec; - return ct; -} - -static inline cputime64_t jiffies64_to_cputime64(const u64 jif) -{ - cputime_t ct; - u64 sec; - - /* have to be a little careful about overflow */ - ct = jif % HZ; - sec = jif / HZ; - if (ct) { - ct *= tb_ticks_per_sec; - do_div(ct, HZ); - } - if (sec) - ct += (cputime_t) sec * tb_ticks_per_sec; - return ct; -} - -static inline u64 cputime64_to_jiffies64(const cputime_t ct) -{ - return mulhdu(ct, __cputime_jiffies_factor); -} - -/* - * Convert cputime <-> milliseconds - */ -extern u64 __cputime_msec_factor; - -static inline unsigned long cputime_to_msecs(const cputime_t ct) -{ - return mulhdu(ct, __cputime_msec_factor); -} - -static inline cputime_t msecs_to_cputime(const unsigned long ms) -{ - cputime_t ct; - unsigned long sec; - - /* have to be a little careful about overflow */ - ct = ms % 1000; - sec = ms / 1000; - if (ct) { - ct *= tb_ticks_per_sec; - do_div(ct, 1000); - } - if (sec) - ct += (cputime_t) sec * tb_ticks_per_sec; - return ct; -} - -/* - * Convert cputime <-> seconds - */ -extern u64 __cputime_sec_factor; - -static inline unsigned long cputime_to_secs(const cputime_t ct) -{ - return mulhdu(ct, __cputime_sec_factor); -} - -static inline cputime_t secs_to_cputime(const unsigned long sec) -{ - return (cputime_t) sec * tb_ticks_per_sec; -} - -/* - * Convert cputime <-> timespec - */ -static inline void cputime_to_timespec(const cputime_t ct, struct timespec *p) -{ - u64 x = ct; - unsigned int frac; - - frac = do_div(x, tb_ticks_per_sec); - p->tv_sec = x; - x = (u64) frac * 1000000000; - do_div(x, tb_ticks_per_sec); - p->tv_nsec = x; -} - -static inline cputime_t timespec_to_cputime(const struct timespec *p) -{ - cputime_t ct; - - ct = (u64) p->tv_nsec * tb_ticks_per_sec; - do_div(ct, 1000000000); - return ct + (u64) p->tv_sec * tb_ticks_per_sec; -} - -/* - * Convert cputime <-> timeval - */ -static inline void cputime_to_timeval(const cputime_t ct, struct timeval *p) -{ - u64 x = ct; - unsigned int frac; - - frac = do_div(x, tb_ticks_per_sec); - p->tv_sec = x; - x = (u64) frac * 1000000; - do_div(x, tb_ticks_per_sec); - p->tv_usec = x; -} - -static inline cputime_t timeval_to_cputime(const struct timeval *p) -{ - cputime_t ct; - - ct = (u64) p->tv_usec * tb_ticks_per_sec; - do_div(ct, 1000000); - return ct + (u64) p->tv_sec * tb_ticks_per_sec; -} - -/* - * Convert cputime <-> clock_t (units of 1/USER_HZ seconds) - */ -extern u64 __cputime_clockt_factor; - -static inline unsigned long cputime_to_clock_t(const cputime_t ct) -{ - return mulhdu(ct, __cputime_clockt_factor); -} - -static inline cputime_t clock_t_to_cputime(const unsigned long clk) -{ - cputime_t ct; - unsigned long sec; - - /* have to be a little careful about overflow */ - ct = clk % USER_HZ; - sec = clk / USER_HZ; - if (ct) { - ct *= tb_ticks_per_sec; - do_div(ct, USER_HZ); - } - if (sec) - ct += (cputime_t) sec * tb_ticks_per_sec; - return ct; -} - -#define cputime64_to_clock_t(ct) cputime_to_clock_t((cputime_t)(ct)) - -#endif /* __KERNEL__ */ -#endif /* CONFIG_VIRT_CPU_ACCOUNTING */ -#endif /* __POWERPC_CPUTIME_H */ diff --git a/include/asm-powerpc/current.h b/include/asm-powerpc/current.h deleted file mode 100644 index e2c7f06931e7..000000000000 --- a/include/asm-powerpc/current.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef _ASM_POWERPC_CURRENT_H -#define _ASM_POWERPC_CURRENT_H -#ifdef __KERNEL__ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -struct task_struct; - -#ifdef __powerpc64__ -#include -#include - -static inline struct task_struct *get_current(void) -{ - struct task_struct *task; - - __asm__ __volatile__("ld %0,%1(13)" - : "=r" (task) - : "i" (offsetof(struct paca_struct, __current))); - - return task; -} -#define current get_current() - -#else - -/* - * We keep `current' in r2 for speed. - */ -register struct task_struct *current asm ("r2"); - -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_CURRENT_H */ diff --git a/include/asm-powerpc/dbdma.h b/include/asm-powerpc/dbdma.h deleted file mode 100644 index e23f07e73cb3..000000000000 --- a/include/asm-powerpc/dbdma.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Definitions for using the Apple Descriptor-Based DMA controller - * in Power Macintosh computers. - * - * Copyright (C) 1996 Paul Mackerras. - */ - -#ifdef __KERNEL__ -#ifndef _ASM_DBDMA_H_ -#define _ASM_DBDMA_H_ -/* - * DBDMA control/status registers. All little-endian. - */ -struct dbdma_regs { - unsigned int control; /* lets you change bits in status */ - unsigned int status; /* DMA and device status bits (see below) */ - unsigned int cmdptr_hi; /* upper 32 bits of command address */ - unsigned int cmdptr; /* (lower 32 bits of) command address (phys) */ - unsigned int intr_sel; /* select interrupt condition bit */ - unsigned int br_sel; /* select branch condition bit */ - unsigned int wait_sel; /* select wait condition bit */ - unsigned int xfer_mode; - unsigned int data2ptr_hi; - unsigned int data2ptr; - unsigned int res1; - unsigned int address_hi; - unsigned int br_addr_hi; - unsigned int res2[3]; -}; - -/* Bits in control and status registers */ -#define RUN 0x8000 -#define PAUSE 0x4000 -#define FLUSH 0x2000 -#define WAKE 0x1000 -#define DEAD 0x0800 -#define ACTIVE 0x0400 -#define BT 0x0100 -#define DEVSTAT 0x00ff - -/* - * DBDMA command structure. These fields are all little-endian! - */ -struct dbdma_cmd { - unsigned short req_count; /* requested byte transfer count */ - unsigned short command; /* command word (has bit-fields) */ - unsigned int phy_addr; /* physical data address */ - unsigned int cmd_dep; /* command-dependent field */ - unsigned short res_count; /* residual count after completion */ - unsigned short xfer_status; /* transfer status */ -}; - -/* DBDMA command values in command field */ -#define OUTPUT_MORE 0 /* transfer memory data to stream */ -#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */ -#define INPUT_MORE 0x2000 /* transfer stream data to memory */ -#define INPUT_LAST 0x3000 /* ditto, expect end marker */ -#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */ -#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */ -#define DBDMA_NOP 0x6000 /* do nothing */ -#define DBDMA_STOP 0x7000 /* suspend processing */ - -/* Key values in command field */ -#define KEY_STREAM0 0 /* usual data stream */ -#define KEY_STREAM1 0x100 /* control/status stream */ -#define KEY_STREAM2 0x200 /* device-dependent stream */ -#define KEY_STREAM3 0x300 /* device-dependent stream */ -#define KEY_REGS 0x500 /* device register space */ -#define KEY_SYSTEM 0x600 /* system memory-mapped space */ -#define KEY_DEVICE 0x700 /* device memory-mapped space */ - -/* Interrupt control values in command field */ -#define INTR_NEVER 0 /* don't interrupt */ -#define INTR_IFSET 0x10 /* intr if condition bit is 1 */ -#define INTR_IFCLR 0x20 /* intr if condition bit is 0 */ -#define INTR_ALWAYS 0x30 /* always interrupt */ - -/* Branch control values in command field */ -#define BR_NEVER 0 /* don't branch */ -#define BR_IFSET 0x4 /* branch if condition bit is 1 */ -#define BR_IFCLR 0x8 /* branch if condition bit is 0 */ -#define BR_ALWAYS 0xc /* always branch */ - -/* Wait control values in command field */ -#define WAIT_NEVER 0 /* don't wait */ -#define WAIT_IFSET 1 /* wait if condition bit is 1 */ -#define WAIT_IFCLR 2 /* wait if condition bit is 0 */ -#define WAIT_ALWAYS 3 /* always wait */ - -/* Align an address for a DBDMA command structure */ -#define DBDMA_ALIGN(x) (((unsigned long)(x) + sizeof(struct dbdma_cmd) - 1) \ - & -sizeof(struct dbdma_cmd)) - -/* Useful macros */ -#define DBDMA_DO_STOP(regs) do { \ - out_le32(&((regs)->control), (RUN|FLUSH)<<16); \ - while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH)) \ - ; \ -} while(0) - -#define DBDMA_DO_RESET(regs) do { \ - out_le32(&((regs)->control), (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);\ - while(in_le32(&((regs)->status)) & (RUN)) \ - ; \ -} while(0) - -#endif /* _ASM_DBDMA_H_ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/dcr-generic.h b/include/asm-powerpc/dcr-generic.h deleted file mode 100644 index 35b71599ec46..000000000000 --- a/include/asm-powerpc/dcr-generic.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See - * the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ASM_POWERPC_DCR_GENERIC_H -#define _ASM_POWERPC_DCR_GENERIC_H -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -enum host_type_t {DCR_HOST_MMIO, DCR_HOST_NATIVE, DCR_HOST_INVALID}; - -typedef struct { - enum host_type_t type; - union { - dcr_host_mmio_t mmio; - dcr_host_native_t native; - } host; -} dcr_host_t; - -extern bool dcr_map_ok_generic(dcr_host_t host); - -extern dcr_host_t dcr_map_generic(struct device_node *dev, unsigned int dcr_n, - unsigned int dcr_c); -extern void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c); - -extern u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n); - -extern void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value); - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_DCR_GENERIC_H */ - - diff --git a/include/asm-powerpc/dcr-mmio.h b/include/asm-powerpc/dcr-mmio.h deleted file mode 100644 index acd491dbd45a..000000000000 --- a/include/asm-powerpc/dcr-mmio.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See - * the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ASM_POWERPC_DCR_MMIO_H -#define _ASM_POWERPC_DCR_MMIO_H -#ifdef __KERNEL__ - -#include - -typedef struct { - void __iomem *token; - unsigned int stride; - unsigned int base; -} dcr_host_mmio_t; - -static inline bool dcr_map_ok_mmio(dcr_host_mmio_t host) -{ - return host.token != NULL; -} - -extern dcr_host_mmio_t dcr_map_mmio(struct device_node *dev, - unsigned int dcr_n, - unsigned int dcr_c); -extern void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c); - -static inline u32 dcr_read_mmio(dcr_host_mmio_t host, unsigned int dcr_n) -{ - return in_be32(host.token + ((host.base + dcr_n) * host.stride)); -} - -static inline void dcr_write_mmio(dcr_host_mmio_t host, - unsigned int dcr_n, - u32 value) -{ - out_be32(host.token + ((host.base + dcr_n) * host.stride), value); -} - -extern u64 of_translate_dcr_address(struct device_node *dev, - unsigned int dcr_n, - unsigned int *stride); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_DCR_MMIO_H */ - - diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h deleted file mode 100644 index 72d2b72c7390..000000000000 --- a/include/asm-powerpc/dcr-native.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See - * the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ASM_POWERPC_DCR_NATIVE_H -#define _ASM_POWERPC_DCR_NATIVE_H -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -#include - -typedef struct { - unsigned int base; -} dcr_host_native_t; - -static inline bool dcr_map_ok_native(dcr_host_native_t host) -{ - return 1; -} - -#define dcr_map_native(dev, dcr_n, dcr_c) \ - ((dcr_host_native_t){ .base = (dcr_n) }) -#define dcr_unmap_native(host, dcr_c) do {} while (0) -#define dcr_read_native(host, dcr_n) mfdcr(dcr_n + host.base) -#define dcr_write_native(host, dcr_n, value) mtdcr(dcr_n + host.base, value) - -/* Device Control Registers */ -void __mtdcr(int reg, unsigned int val); -unsigned int __mfdcr(int reg); -#define mfdcr(rn) \ - ({unsigned int rval; \ - if (__builtin_constant_p(rn)) \ - asm volatile("mfdcr %0," __stringify(rn) \ - : "=r" (rval)); \ - else \ - rval = __mfdcr(rn); \ - rval;}) - -#define mtdcr(rn, v) \ -do { \ - if (__builtin_constant_p(rn)) \ - asm volatile("mtdcr " __stringify(rn) ",%0" \ - : : "r" (v)); \ - else \ - __mtdcr(rn, v); \ -} while (0) - -/* R/W of indirect DCRs make use of standard naming conventions for DCRs */ -extern spinlock_t dcr_ind_lock; - -static inline unsigned __mfdcri(int base_addr, int base_data, int reg) -{ - unsigned long flags; - unsigned int val; - - spin_lock_irqsave(&dcr_ind_lock, flags); - __mtdcr(base_addr, reg); - val = __mfdcr(base_data); - spin_unlock_irqrestore(&dcr_ind_lock, flags); - return val; -} - -static inline void __mtdcri(int base_addr, int base_data, int reg, - unsigned val) -{ - unsigned long flags; - - spin_lock_irqsave(&dcr_ind_lock, flags); - __mtdcr(base_addr, reg); - __mtdcr(base_data, val); - spin_unlock_irqrestore(&dcr_ind_lock, flags); -} - -static inline void __dcri_clrset(int base_addr, int base_data, int reg, - unsigned clr, unsigned set) -{ - unsigned long flags; - unsigned int val; - - spin_lock_irqsave(&dcr_ind_lock, flags); - __mtdcr(base_addr, reg); - val = (__mfdcr(base_data) & ~clr) | set; - __mtdcr(base_data, val); - spin_unlock_irqrestore(&dcr_ind_lock, flags); -} - -#define mfdcri(base, reg) __mfdcri(DCRN_ ## base ## _CONFIG_ADDR, \ - DCRN_ ## base ## _CONFIG_DATA, \ - reg) - -#define mtdcri(base, reg, data) __mtdcri(DCRN_ ## base ## _CONFIG_ADDR, \ - DCRN_ ## base ## _CONFIG_DATA, \ - reg, data) - -#define dcri_clrset(base, reg, clr, set) __dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR, \ - DCRN_ ## base ## _CONFIG_DATA, \ - reg, clr, set) - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_DCR_NATIVE_H */ diff --git a/include/asm-powerpc/dcr-regs.h b/include/asm-powerpc/dcr-regs.h deleted file mode 100644 index 29b0ecef980a..000000000000 --- a/include/asm-powerpc/dcr-regs.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Common DCR / SDR / CPR register definitions used on various IBM/AMCC - * 4xx processors - * - * Copyright 2007 Benjamin Herrenschmidt, IBM Corp - * - * - * Mostly lifted from asm-ppc/ibm4xx.h by - * - * Copyright (c) 1999 Grant Erickson - * - */ - -#ifndef __DCR_REGS_H__ -#define __DCR_REGS_H__ - -/* - * Most DCRs used for controlling devices such as the MAL, DMA engine, - * etc... are obtained for the device tree. - * - * The definitions in this files are fixed DCRs and indirect DCRs that - * are commonly used outside of specific drivers or refer to core - * common registers that may occasionally have to be tweaked outside - * of the driver main register set - */ - -/* CPRs (440GX and 440SP/440SPe) */ -#define DCRN_CPR0_CONFIG_ADDR 0xc -#define DCRN_CPR0_CONFIG_DATA 0xd - -/* SDRs (440GX and 440SP/440SPe) */ -#define DCRN_SDR0_CONFIG_ADDR 0xe -#define DCRN_SDR0_CONFIG_DATA 0xf - -#define SDR0_PFC0 0x4100 -#define SDR0_PFC1 0x4101 -#define SDR0_PFC1_EPS 0x1c00000 -#define SDR0_PFC1_EPS_SHIFT 22 -#define SDR0_PFC1_RMII 0x02000000 -#define SDR0_MFR 0x4300 -#define SDR0_MFR_TAH0 0x80000000 /* TAHOE0 Enable */ -#define SDR0_MFR_TAH1 0x40000000 /* TAHOE1 Enable */ -#define SDR0_MFR_PCM 0x10000000 /* PPC440GP irq compat mode */ -#define SDR0_MFR_ECS 0x08000000 /* EMAC int clk */ -#define SDR0_MFR_T0TXFL 0x00080000 -#define SDR0_MFR_T0TXFH 0x00040000 -#define SDR0_MFR_T1TXFL 0x00020000 -#define SDR0_MFR_T1TXFH 0x00010000 -#define SDR0_MFR_E0TXFL 0x00008000 -#define SDR0_MFR_E0TXFH 0x00004000 -#define SDR0_MFR_E0RXFL 0x00002000 -#define SDR0_MFR_E0RXFH 0x00001000 -#define SDR0_MFR_E1TXFL 0x00000800 -#define SDR0_MFR_E1TXFH 0x00000400 -#define SDR0_MFR_E1RXFL 0x00000200 -#define SDR0_MFR_E1RXFH 0x00000100 -#define SDR0_MFR_E2TXFL 0x00000080 -#define SDR0_MFR_E2TXFH 0x00000040 -#define SDR0_MFR_E2RXFL 0x00000020 -#define SDR0_MFR_E2RXFH 0x00000010 -#define SDR0_MFR_E3TXFL 0x00000008 -#define SDR0_MFR_E3TXFH 0x00000004 -#define SDR0_MFR_E3RXFL 0x00000002 -#define SDR0_MFR_E3RXFH 0x00000001 -#define SDR0_UART0 0x0120 -#define SDR0_UART1 0x0121 -#define SDR0_UART2 0x0122 -#define SDR0_UART3 0x0123 -#define SDR0_CUST0 0x4000 - -/* - * All those DCR register addresses are offsets from the base address - * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is - * excluded here and configured in the device tree. - */ -#define DCRN_SRAM0_SB0CR 0x00 -#define DCRN_SRAM0_SB1CR 0x01 -#define DCRN_SRAM0_SB2CR 0x02 -#define DCRN_SRAM0_SB3CR 0x03 -#define SRAM_SBCR_BU_MASK 0x00000180 -#define SRAM_SBCR_BS_64KB 0x00000800 -#define SRAM_SBCR_BU_RO 0x00000080 -#define SRAM_SBCR_BU_RW 0x00000180 -#define DCRN_SRAM0_BEAR 0x04 -#define DCRN_SRAM0_BESR0 0x05 -#define DCRN_SRAM0_BESR1 0x06 -#define DCRN_SRAM0_PMEG 0x07 -#define DCRN_SRAM0_CID 0x08 -#define DCRN_SRAM0_REVID 0x09 -#define DCRN_SRAM0_DPC 0x0a -#define SRAM_DPC_ENABLE 0x80000000 - -/* - * All those DCR register addresses are offsets from the base address - * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is - * excluded here and configured in the device tree. - */ -#define DCRN_L2C0_CFG 0x00 -#define L2C_CFG_L2M 0x80000000 -#define L2C_CFG_ICU 0x40000000 -#define L2C_CFG_DCU 0x20000000 -#define L2C_CFG_DCW_MASK 0x1e000000 -#define L2C_CFG_TPC 0x01000000 -#define L2C_CFG_CPC 0x00800000 -#define L2C_CFG_FRAN 0x00200000 -#define L2C_CFG_SS_MASK 0x00180000 -#define L2C_CFG_SS_256 0x00000000 -#define L2C_CFG_CPIM 0x00040000 -#define L2C_CFG_TPIM 0x00020000 -#define L2C_CFG_LIM 0x00010000 -#define L2C_CFG_PMUX_MASK 0x00007000 -#define L2C_CFG_PMUX_SNP 0x00000000 -#define L2C_CFG_PMUX_IF 0x00001000 -#define L2C_CFG_PMUX_DF 0x00002000 -#define L2C_CFG_PMUX_DS 0x00003000 -#define L2C_CFG_PMIM 0x00000800 -#define L2C_CFG_TPEI 0x00000400 -#define L2C_CFG_CPEI 0x00000200 -#define L2C_CFG_NAM 0x00000100 -#define L2C_CFG_SMCM 0x00000080 -#define L2C_CFG_NBRM 0x00000040 -#define L2C_CFG_RDBW 0x00000008 /* only 460EX/GT */ -#define DCRN_L2C0_CMD 0x01 -#define L2C_CMD_CLR 0x80000000 -#define L2C_CMD_DIAG 0x40000000 -#define L2C_CMD_INV 0x20000000 -#define L2C_CMD_CCP 0x10000000 -#define L2C_CMD_CTE 0x08000000 -#define L2C_CMD_STRC 0x04000000 -#define L2C_CMD_STPC 0x02000000 -#define L2C_CMD_RPMC 0x01000000 -#define L2C_CMD_HCC 0x00800000 -#define DCRN_L2C0_ADDR 0x02 -#define DCRN_L2C0_DATA 0x03 -#define DCRN_L2C0_SR 0x04 -#define L2C_SR_CC 0x80000000 -#define L2C_SR_CPE 0x40000000 -#define L2C_SR_TPE 0x20000000 -#define L2C_SR_LRU 0x10000000 -#define L2C_SR_PCS 0x08000000 -#define DCRN_L2C0_REVID 0x05 -#define DCRN_L2C0_SNP0 0x06 -#define DCRN_L2C0_SNP1 0x07 -#define L2C_SNP_BA_MASK 0xffff0000 -#define L2C_SNP_SSR_MASK 0x0000f000 -#define L2C_SNP_SSR_32G 0x0000f000 -#define L2C_SNP_ESR 0x00000800 - -#endif /* __DCR_REGS_H__ */ diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h deleted file mode 100644 index 53b283050ab3..000000000000 --- a/include/asm-powerpc/dcr.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See - * the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ASM_POWERPC_DCR_H -#define _ASM_POWERPC_DCR_H -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ -#ifdef CONFIG_PPC_DCR - -#ifdef CONFIG_PPC_DCR_NATIVE -#include -#endif - -#ifdef CONFIG_PPC_DCR_MMIO -#include -#endif - - -/* Indirection layer for providing both NATIVE and MMIO support. */ - -#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) - -#include - -#define DCR_MAP_OK(host) dcr_map_ok_generic(host) -#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c) -#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c) -#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n) -#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value) - -#else - -#ifdef CONFIG_PPC_DCR_NATIVE -typedef dcr_host_native_t dcr_host_t; -#define DCR_MAP_OK(host) dcr_map_ok_native(host) -#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c) -#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c) -#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n) -#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value) -#else -typedef dcr_host_mmio_t dcr_host_t; -#define DCR_MAP_OK(host) dcr_map_ok_mmio(host) -#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c) -#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c) -#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n) -#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value) -#endif - -#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */ - -/* - * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR - * base from the device-tree - */ -#ifdef CONFIG_PPC_MERGE -struct device_node; -extern unsigned int dcr_resource_start(struct device_node *np, - unsigned int index); -extern unsigned int dcr_resource_len(struct device_node *np, - unsigned int index); -#endif /* CONFIG_PPC_MERGE */ - -#endif /* CONFIG_PPC_DCR */ -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_DCR_H */ diff --git a/include/asm-powerpc/delay.h b/include/asm-powerpc/delay.h deleted file mode 100644 index f9200a65c632..000000000000 --- a/include/asm-powerpc/delay.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef _ASM_POWERPC_DELAY_H -#define _ASM_POWERPC_DELAY_H -#ifdef __KERNEL__ - -/* - * Copyright 1996, Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * PPC64 Support added by Dave Engebretsen, Todd Inglett, Mike Corrigan, - * Anton Blanchard. - */ - -extern void __delay(unsigned long loops); -extern void udelay(unsigned long usecs); - -/* - * On shared processor machines the generic implementation of mdelay can - * result in large errors. While each iteration of the loop inside mdelay - * is supposed to take 1ms, the hypervisor could sleep our partition for - * longer (eg 10ms). With the right timing these errors can add up. - * - * Since there is no 32bit overflow issue on 64bit kernels, just call - * udelay directly. - */ -#ifdef CONFIG_PPC64 -#define mdelay(n) udelay((n) * 1000) -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_DELAY_H */ diff --git a/include/asm-powerpc/device.h b/include/asm-powerpc/device.h deleted file mode 100644 index 228ab2a315b9..000000000000 --- a/include/asm-powerpc/device.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#ifndef _ASM_POWERPC_DEVICE_H -#define _ASM_POWERPC_DEVICE_H - -struct dma_mapping_ops; -struct device_node; - -struct dev_archdata { - /* Optional pointer to an OF device node */ - struct device_node *of_node; - - /* DMA operations on that device */ - struct dma_mapping_ops *dma_ops; - void *dma_data; - - /* NUMA node if applicable */ - int numa_node; -}; - -#endif /* _ASM_POWERPC_DEVICE_H */ diff --git a/include/asm-powerpc/div64.h b/include/asm-powerpc/div64.h deleted file mode 100644 index 6cd978cefb28..000000000000 --- a/include/asm-powerpc/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h deleted file mode 100644 index c7ca45f97dd2..000000000000 --- a/include/asm-powerpc/dma-mapping.h +++ /dev/null @@ -1,474 +0,0 @@ -/* - * Copyright (C) 2004 IBM - * - * Implements the generic device dma API for powerpc. - * the pci and vio busses - */ -#ifndef _ASM_DMA_MAPPING_H -#define _ASM_DMA_MAPPING_H -#ifdef __KERNEL__ - -#include -#include -/* need struct page definitions */ -#include -#include -#include -#include - -#define DMA_ERROR_CODE (~(dma_addr_t)0x0) - -#ifdef CONFIG_NOT_COHERENT_CACHE -/* - * DMA-consistent mapping functions for PowerPCs that don't support - * cache snooping. These allocate/free a region of uncached mapped - * memory space for use with DMA devices. Alternatively, you could - * allocate the space "normally" and use the cache management functions - * to ensure it is consistent. - */ -extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp); -extern void __dma_free_coherent(size_t size, void *vaddr); -extern void __dma_sync(void *vaddr, size_t size, int direction); -extern void __dma_sync_page(struct page *page, unsigned long offset, - size_t size, int direction); - -#else /* ! CONFIG_NOT_COHERENT_CACHE */ -/* - * Cache coherent cores. - */ - -#define __dma_alloc_coherent(gfp, size, handle) NULL -#define __dma_free_coherent(size, addr) ((void)0) -#define __dma_sync(addr, size, rw) ((void)0) -#define __dma_sync_page(pg, off, sz, rw) ((void)0) - -#endif /* ! CONFIG_NOT_COHERENT_CACHE */ - -#ifdef CONFIG_PPC64 - -static inline unsigned long device_to_mask(struct device *dev) -{ - if (dev->dma_mask && *dev->dma_mask) - return *dev->dma_mask; - /* Assume devices without mask can take 32 bit addresses */ - return 0xfffffffful; -} - -/* - * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO - */ -struct dma_mapping_ops { - void * (*alloc_coherent)(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - void (*free_coherent)(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - dma_addr_t (*map_single)(struct device *dev, void *ptr, - size_t size, enum dma_data_direction direction, - struct dma_attrs *attrs); - void (*unmap_single)(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction direction, - struct dma_attrs *attrs); - int (*map_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction, - struct dma_attrs *attrs); - void (*unmap_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction, - struct dma_attrs *attrs); - int (*dma_supported)(struct device *dev, u64 mask); - int (*set_dma_mask)(struct device *dev, u64 dma_mask); -}; - -static inline struct dma_mapping_ops *get_dma_ops(struct device *dev) -{ - /* We don't handle the NULL dev case for ISA for now. We could - * do it via an out of line call but it is not needed for now. The - * only ISA DMA device we support is the floppy and we have a hack - * in the floppy driver directly to get a device for us. - */ - if (unlikely(dev == NULL || dev->archdata.dma_ops == NULL)) - return NULL; - return dev->archdata.dma_ops; -} - -static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops) -{ - dev->archdata.dma_ops = ops; -} - -static inline int dma_supported(struct device *dev, u64 mask) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - if (unlikely(dma_ops == NULL)) - return 0; - if (dma_ops->dma_supported == NULL) - return 1; - return dma_ops->dma_supported(dev, mask); -} - -/* We have our own implementation of pci_set_dma_mask() */ -#define HAVE_ARCH_PCI_SET_DMA_MASK - -static inline int dma_set_mask(struct device *dev, u64 dma_mask) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - if (unlikely(dma_ops == NULL)) - return -EIO; - if (dma_ops->set_dma_mask != NULL) - return dma_ops->set_dma_mask(dev, dma_mask); - if (!dev->dma_mask || !dma_supported(dev, dma_mask)) - return -EIO; - *dev->dma_mask = dma_mask; - return 0; -} - -static inline dma_addr_t dma_map_single_attrs(struct device *dev, - void *cpu_addr, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - return dma_ops->map_single(dev, cpu_addr, size, direction, attrs); -} - -static inline void dma_unmap_single_attrs(struct device *dev, - dma_addr_t dma_addr, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - dma_ops->unmap_single(dev, dma_addr, size, direction, attrs); -} - -static inline dma_addr_t dma_map_page_attrs(struct device *dev, - struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - return dma_ops->map_single(dev, page_address(page) + offset, size, - direction, attrs); -} - -static inline void dma_unmap_page_attrs(struct device *dev, - dma_addr_t dma_address, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - dma_ops->unmap_single(dev, dma_address, size, direction, attrs); -} - -static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - return dma_ops->map_sg(dev, sg, nents, direction, attrs); -} - -static inline void dma_unmap_sg_attrs(struct device *dev, - struct scatterlist *sg, - int nhwentries, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs); -} - -static inline void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - return dma_ops->alloc_coherent(dev, size, dma_handle, flag); -} - -static inline void dma_free_coherent(struct device *dev, size_t size, - void *cpu_addr, dma_addr_t dma_handle) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); -} - -static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, - size_t size, - enum dma_data_direction direction) -{ - return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL); -} - -static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, - size_t size, - enum dma_data_direction direction) -{ - dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL); -} - -static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - return dma_map_page_attrs(dev, page, offset, size, direction, NULL); -} - -static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, - enum dma_data_direction direction) -{ - dma_unmap_page_attrs(dev, dma_address, size, direction, NULL); -} - -static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction) -{ - return dma_map_sg_attrs(dev, sg, nents, direction, NULL); -} - -static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, - enum dma_data_direction direction) -{ - dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL); -} - -/* - * Available generic sets of operations - */ -extern struct dma_mapping_ops dma_iommu_ops; -extern struct dma_mapping_ops dma_direct_ops; - -#else /* CONFIG_PPC64 */ - -#define dma_supported(dev, mask) (1) - -static inline int dma_set_mask(struct device *dev, u64 dma_mask) -{ - if (!dev->dma_mask || !dma_supported(dev, mask)) - return -EIO; - - *dev->dma_mask = dma_mask; - - return 0; -} - -static inline void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, - gfp_t gfp) -{ -#ifdef CONFIG_NOT_COHERENT_CACHE - return __dma_alloc_coherent(size, dma_handle, gfp); -#else - void *ret; - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || dev->coherent_dma_mask < 0xffffffff) - gfp |= GFP_DMA; - - ret = (void *)__get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_bus(ret); - } - - return ret; -#endif -} - -static inline void -dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ -#ifdef CONFIG_NOT_COHERENT_CACHE - __dma_free_coherent(size, vaddr); -#else - free_pages((unsigned long)vaddr, get_order(size)); -#endif -} - -static inline dma_addr_t -dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - __dma_sync(ptr, size, direction); - - return virt_to_bus(ptr); -} - -static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, - size_t size, - enum dma_data_direction direction) -{ - /* We do nothing. */ -} - -static inline dma_addr_t -dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - __dma_sync_page(page, offset, size, direction); - - return page_to_bus(page) + offset; -} - -static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, - enum dma_data_direction direction) -{ - /* We do nothing. */ -} - -static inline int -dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents, - enum dma_data_direction direction) -{ - struct scatterlist *sg; - int i; - - BUG_ON(direction == DMA_NONE); - - for_each_sg(sgl, sg, nents, i) { - BUG_ON(!sg_page(sg)); - __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction); - sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset; - } - - return nents; -} - -static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, - enum dma_data_direction direction) -{ - /* We don't do anything here. */ -} - -#endif /* CONFIG_PPC64 */ - -static inline void dma_sync_single_for_cpu(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - __dma_sync(bus_to_virt(dma_handle), size, direction); -} - -static inline void dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - __dma_sync(bus_to_virt(dma_handle), size, direction); -} - -static inline void dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sgl, int nents, - enum dma_data_direction direction) -{ - struct scatterlist *sg; - int i; - - BUG_ON(direction == DMA_NONE); - - for_each_sg(sgl, sg, nents, i) - __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction); -} - -static inline void dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sgl, int nents, - enum dma_data_direction direction) -{ - struct scatterlist *sg; - int i; - - BUG_ON(direction == DMA_NONE); - - for_each_sg(sgl, sg, nents, i) - __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction); -} - -static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) -{ -#ifdef CONFIG_PPC64 - return (dma_addr == DMA_ERROR_CODE); -#else - return 0; -#endif -} - -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) -#ifdef CONFIG_NOT_COHERENT_CACHE -#define dma_is_consistent(d, h) (0) -#else -#define dma_is_consistent(d, h) (1) -#endif - -static inline int dma_get_cache_alignment(void) -{ -#ifdef CONFIG_PPC64 - /* no easy way to get cache size on all processors, so return - * the maximum possible, to be safe */ - return (1 << INTERNODE_CACHE_SHIFT); -#else - /* - * Each processor family will define its own L1_CACHE_SHIFT, - * L1_CACHE_BYTES wraps to this, so this is always safe. - */ - return L1_CACHE_BYTES; -#endif -} - -static inline void dma_sync_single_range_for_cpu(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - /* just sync everything for now */ - dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction); -} - -static inline void dma_sync_single_range_for_device(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - /* just sync everything for now */ - dma_sync_single_for_device(dev, dma_handle, offset + size, direction); -} - -static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - __dma_sync(vaddr, size, (int)direction); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_DMA_MAPPING_H */ diff --git a/include/asm-powerpc/dma.h b/include/asm-powerpc/dma.h deleted file mode 100644 index a7e06e25c708..000000000000 --- a/include/asm-powerpc/dma.h +++ /dev/null @@ -1,360 +0,0 @@ -#ifndef _ASM_POWERPC_DMA_H -#define _ASM_POWERPC_DMA_H -#ifdef __KERNEL__ - -/* - * Defines for using and allocating dma channels. - * Written by Hennus Bergman, 1992. - * High DMA channel support & info by Hannu Savolainen - * and John Boyd, Nov. 1992. - * Changes for ppc sound by Christoph Nadig - */ - -/* - * Note: Adapted for PowerPC by Gary Thomas - * Modified by Cort Dougan - * - * None of this really applies for Power Macintoshes. There is - * basically just enough here to get kernel/dma.c to compile. - * - * There may be some comments or restrictions made here which are - * not valid for the PReP platform. Take what you read - * with a grain of salt. - */ - -#include -#include -#include - -#ifndef MAX_DMA_CHANNELS -#define MAX_DMA_CHANNELS 8 -#endif - -/* The maximum address that we can perform a DMA transfer to on this platform */ -/* Doesn't really apply... */ -#define MAX_DMA_ADDRESS (~0UL) - -#if !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) - -#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER -#define dma_outb outb_p -#else -#define dma_outb outb -#endif - -#define dma_inb inb - -/* - * NOTES about DMA transfers: - * - * controller 1: channels 0-3, byte operations, ports 00-1F - * controller 2: channels 4-7, word operations, ports C0-DF - * - * - ALL registers are 8 bits only, regardless of transfer size - * - channel 4 is not used - cascades 1 into 2. - * - channels 0-3 are byte - addresses/counts are for physical bytes - * - channels 5-7 are word - addresses/counts are for physical words - * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries - * - transfer count loaded to registers is 1 less than actual count - * - controller 2 offsets are all even (2x offsets for controller 1) - * - page registers for 5-7 don't use data bit 0, represent 128K pages - * - page registers for 0-3 use bit 0, represent 64K pages - * - * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory. - * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing. - * Note that addresses loaded into registers must be _physical_ addresses, - * not logical addresses (which may differ if paging is active). - * - * Address mapping for channels 0-3: - * - * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * P7 ... P0 A7 ... A0 A7 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Address mapping for channels 5-7: - * - * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) - * | ... | \ \ ... \ \ \ ... \ \ - * | ... | \ \ ... \ \ \ ... \ (not used) - * | ... | \ \ ... \ \ \ ... \ - * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses - * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at - * the hardware level, so odd-byte transfers aren't possible). - * - * Transfer count (_not # bytes_) is limited to 64K, represented as actual - * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, - * and up to 128K bytes may be transferred on channels 5-7 in one operation. - * - */ - -/* 8237 DMA controllers */ -#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ -#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */ - -/* DMA controller registers */ -#define DMA1_CMD_REG 0x08 /* command register (w) */ -#define DMA1_STAT_REG 0x08 /* status register (r) */ -#define DMA1_REQ_REG 0x09 /* request register (w) */ -#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ -#define DMA1_MODE_REG 0x0B /* mode register (w) */ -#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ -#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ -#define DMA1_RESET_REG 0x0D /* Master Clear (w) */ -#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ -#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ - -#define DMA2_CMD_REG 0xD0 /* command register (w) */ -#define DMA2_STAT_REG 0xD0 /* status register (r) */ -#define DMA2_REQ_REG 0xD2 /* request register (w) */ -#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ -#define DMA2_MODE_REG 0xD6 /* mode register (w) */ -#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ -#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ -#define DMA2_RESET_REG 0xDA /* Master Clear (w) */ -#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ -#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ - -#define DMA_ADDR_0 0x00 /* DMA address registers */ -#define DMA_ADDR_1 0x02 -#define DMA_ADDR_2 0x04 -#define DMA_ADDR_3 0x06 -#define DMA_ADDR_4 0xC0 -#define DMA_ADDR_5 0xC4 -#define DMA_ADDR_6 0xC8 -#define DMA_ADDR_7 0xCC - -#define DMA_CNT_0 0x01 /* DMA count registers */ -#define DMA_CNT_1 0x03 -#define DMA_CNT_2 0x05 -#define DMA_CNT_3 0x07 -#define DMA_CNT_4 0xC2 -#define DMA_CNT_5 0xC6 -#define DMA_CNT_6 0xCA -#define DMA_CNT_7 0xCE - -#define DMA_LO_PAGE_0 0x87 /* DMA page registers */ -#define DMA_LO_PAGE_1 0x83 -#define DMA_LO_PAGE_2 0x81 -#define DMA_LO_PAGE_3 0x82 -#define DMA_LO_PAGE_5 0x8B -#define DMA_LO_PAGE_6 0x89 -#define DMA_LO_PAGE_7 0x8A - -#define DMA_HI_PAGE_0 0x487 /* DMA page registers */ -#define DMA_HI_PAGE_1 0x483 -#define DMA_HI_PAGE_2 0x481 -#define DMA_HI_PAGE_3 0x482 -#define DMA_HI_PAGE_5 0x48B -#define DMA_HI_PAGE_6 0x489 -#define DMA_HI_PAGE_7 0x48A - -#define DMA1_EXT_REG 0x40B -#define DMA2_EXT_REG 0x4D6 - -#ifndef __powerpc64__ - /* in arch/ppc/kernel/setup.c -- Cort */ - extern unsigned int DMA_MODE_WRITE; - extern unsigned int DMA_MODE_READ; - extern unsigned long ISA_DMA_THRESHOLD; -#else - #define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ - #define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ -#endif - -#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ - -#define DMA_AUTOINIT 0x10 - -extern spinlock_t dma_spin_lock; - -static __inline__ unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - unsigned char ucDmaCmd = 0x00; - - if (dmanr != 4) { - dma_outb(0, DMA2_MASK_REG); /* This may not be enabled */ - dma_outb(ucDmaCmd, DMA2_CMD_REG); /* Enable group */ - } - if (dmanr <= 3) { - dma_outb(dmanr, DMA1_MASK_REG); - dma_outb(ucDmaCmd, DMA1_CMD_REG); /* Enable group */ - } else { - dma_outb(dmanr & 3, DMA2_MASK_REG); - } -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - if (dmanr <= 3) - dma_outb(dmanr | 4, DMA1_MASK_REG); - else - dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while interrupts are disabled! --- - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ - if (dmanr <= 3) - dma_outb(0, DMA1_CLEAR_FF_REG); - else - dma_outb(0, DMA2_CLEAR_FF_REG); -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - if (dmanr <= 3) - dma_outb(mode | dmanr, DMA1_MODE_REG); - else - dma_outb(mode | (dmanr & 3), DMA2_MODE_REG); -} - -/* Set only the page register bits of the transfer address. - * This is used for successive transfers when we know the contents of - * the lower 16 bits of the DMA current address register, but a 64k boundary - * may have been crossed. - */ -static __inline__ void set_dma_page(unsigned int dmanr, int pagenr) -{ - switch (dmanr) { - case 0: - dma_outb(pagenr, DMA_LO_PAGE_0); - dma_outb(pagenr >> 8, DMA_HI_PAGE_0); - break; - case 1: - dma_outb(pagenr, DMA_LO_PAGE_1); - dma_outb(pagenr >> 8, DMA_HI_PAGE_1); - break; - case 2: - dma_outb(pagenr, DMA_LO_PAGE_2); - dma_outb(pagenr >> 8, DMA_HI_PAGE_2); - break; - case 3: - dma_outb(pagenr, DMA_LO_PAGE_3); - dma_outb(pagenr >> 8, DMA_HI_PAGE_3); - break; - case 5: - dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5); - dma_outb(pagenr >> 8, DMA_HI_PAGE_5); - break; - case 6: - dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6); - dma_outb(pagenr >> 8, DMA_HI_PAGE_6); - break; - case 7: - dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7); - dma_outb(pagenr >> 8, DMA_HI_PAGE_7); - break; - } -} - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys) -{ - if (dmanr <= 3) { - dma_outb(phys & 0xff, - ((dmanr & 3) << 1) + IO_DMA1_BASE); - dma_outb((phys >> 8) & 0xff, - ((dmanr & 3) << 1) + IO_DMA1_BASE); - } else { - dma_outb((phys >> 1) & 0xff, - ((dmanr & 3) << 2) + IO_DMA2_BASE); - dma_outb((phys >> 9) & 0xff, - ((dmanr & 3) << 2) + IO_DMA2_BASE); - } - set_dma_page(dmanr, phys >> 16); -} - - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; - if (dmanr <= 3) { - dma_outb(count & 0xff, - ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE); - dma_outb((count >> 8) & 0xff, - ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE); - } else { - dma_outb((count >> 1) & 0xff, - ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE); - dma_outb((count >> 9) & 0xff, - ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE); - } -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - unsigned int io_port = (dmanr <= 3) - ? ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE - : ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE; - - /* using short to get 16-bit wrap around */ - unsigned short count; - - count = 1 + dma_inb(io_port); - count += dma_inb(io_port) << 8; - - return (dmanr <= 3) ? count : (count << 1); -} - -/* These are in kernel/dma.c: */ - -/* reserve a DMA channel */ -extern int request_dma(unsigned int dmanr, const char *device_id); -/* release it again */ -extern void free_dma(unsigned int dmanr); - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_DMA_H */ diff --git a/include/asm-powerpc/edac.h b/include/asm-powerpc/edac.h deleted file mode 100644 index 6ead88bbfbb8..000000000000 --- a/include/asm-powerpc/edac.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * PPC EDAC common defs - * - * Author: Dave Jiang - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef ASM_EDAC_H -#define ASM_EDAC_H -/* - * ECC atomic, DMA, SMP and interrupt safe scrub function. - * Implements the per arch atomic_scrub() that EDAC use for software - * ECC scrubbing. It reads memory and then writes back the original - * value, allowing the hardware to detect and correct memory errors. - */ -static __inline__ void atomic_scrub(void *va, u32 size) -{ - unsigned int *virt_addr = va; - unsigned int temp; - unsigned int i; - - for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) { - /* Very carefully read and write to memory atomically - * so we are interrupt, DMA and SMP safe. - */ - __asm__ __volatile__ ("\n\ - 1: lwarx %0,0,%1\n\ - stwcx. %0,0,%1\n\ - bne- 1b\n\ - isync" - : "=&r"(temp) - : "r"(virt_addr) - : "cr0", "memory"); - } -} - -#endif diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h deleted file mode 100644 index b886bec67016..000000000000 --- a/include/asm-powerpc/eeh.h +++ /dev/null @@ -1,211 +0,0 @@ -/* - * eeh.h - * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _PPC64_EEH_H -#define _PPC64_EEH_H -#ifdef __KERNEL__ - -#include -#include -#include - -struct pci_dev; -struct pci_bus; -struct device_node; - -#ifdef CONFIG_EEH - -extern int eeh_subsystem_enabled; - -/* Values for eeh_mode bits in device_node */ -#define EEH_MODE_SUPPORTED (1<<0) -#define EEH_MODE_NOCHECK (1<<1) -#define EEH_MODE_ISOLATED (1<<2) -#define EEH_MODE_RECOVERING (1<<3) -#define EEH_MODE_IRQ_DISABLED (1<<4) - -/* Max number of EEH freezes allowed before we consider the device - * to be permanently disabled. */ -#define EEH_MAX_ALLOWED_FREEZES 5 - -void __init eeh_init(void); -unsigned long eeh_check_failure(const volatile void __iomem *token, - unsigned long val); -int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev); -void __init pci_addr_cache_build(void); - -/** - * eeh_add_device_early - * eeh_add_device_late - * - * Perform eeh initialization for devices added after boot. - * Call eeh_add_device_early before doing any i/o to the - * device (including config space i/o). Call eeh_add_device_late - * to finish the eeh setup for this device. - */ -void eeh_add_device_tree_early(struct device_node *); -void eeh_add_device_tree_late(struct pci_bus *); - -/** - * eeh_remove_device_recursive - undo EEH for device & children. - * @dev: pci device to be removed - * - * As above, this removes the device; it also removes child - * pci devices as well. - */ -void eeh_remove_bus_device(struct pci_dev *); - -/** - * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure. - * - * If this macro yields TRUE, the caller relays to eeh_check_failure() - * which does further tests out of line. - */ -#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_subsystem_enabled) - -/* - * Reads from a device which has been isolated by EEH will return - * all 1s. This macro gives an all-1s value of the given size (in - * bytes: 1, 2, or 4) for comparing with the result of a read. - */ -#define EEH_IO_ERROR_VALUE(size) (~0U >> ((4 - (size)) * 8)) - -#else /* !CONFIG_EEH */ -static inline void eeh_init(void) { } - -static inline unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val) -{ - return val; -} - -static inline int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) -{ - return 0; -} - -static inline void pci_addr_cache_build(void) { } - -static inline void eeh_add_device_tree_early(struct device_node *dn) { } - -static inline void eeh_add_device_tree_late(struct pci_bus *bus) { } - -static inline void eeh_remove_bus_device(struct pci_dev *dev) { } -#define EEH_POSSIBLE_ERROR(val, type) (0) -#define EEH_IO_ERROR_VALUE(size) (-1UL) -#endif /* CONFIG_EEH */ - -/* - * MMIO read/write operations with EEH support. - */ -static inline u8 eeh_readb(const volatile void __iomem *addr) -{ - u8 val = in_8(addr); - if (EEH_POSSIBLE_ERROR(val, u8)) - return eeh_check_failure(addr, val); - return val; -} - -static inline u16 eeh_readw(const volatile void __iomem *addr) -{ - u16 val = in_le16(addr); - if (EEH_POSSIBLE_ERROR(val, u16)) - return eeh_check_failure(addr, val); - return val; -} - -static inline u32 eeh_readl(const volatile void __iomem *addr) -{ - u32 val = in_le32(addr); - if (EEH_POSSIBLE_ERROR(val, u32)) - return eeh_check_failure(addr, val); - return val; -} - -static inline u64 eeh_readq(const volatile void __iomem *addr) -{ - u64 val = in_le64(addr); - if (EEH_POSSIBLE_ERROR(val, u64)) - return eeh_check_failure(addr, val); - return val; -} - -static inline u16 eeh_readw_be(const volatile void __iomem *addr) -{ - u16 val = in_be16(addr); - if (EEH_POSSIBLE_ERROR(val, u16)) - return eeh_check_failure(addr, val); - return val; -} - -static inline u32 eeh_readl_be(const volatile void __iomem *addr) -{ - u32 val = in_be32(addr); - if (EEH_POSSIBLE_ERROR(val, u32)) - return eeh_check_failure(addr, val); - return val; -} - -static inline u64 eeh_readq_be(const volatile void __iomem *addr) -{ - u64 val = in_be64(addr); - if (EEH_POSSIBLE_ERROR(val, u64)) - return eeh_check_failure(addr, val); - return val; -} - -static inline void eeh_memcpy_fromio(void *dest, const - volatile void __iomem *src, - unsigned long n) -{ - _memcpy_fromio(dest, src, n); - - /* Look for ffff's here at dest[n]. Assume that at least 4 bytes - * were copied. Check all four bytes. - */ - if (n >= 4 && EEH_POSSIBLE_ERROR(*((u32 *)(dest + n - 4)), u32)) - eeh_check_failure(src, *((u32 *)(dest + n - 4))); -} - -/* in-string eeh macros */ -static inline void eeh_readsb(const volatile void __iomem *addr, void * buf, - int ns) -{ - _insb(addr, buf, ns); - if (EEH_POSSIBLE_ERROR((*(((u8*)buf)+ns-1)), u8)) - eeh_check_failure(addr, *(u8*)buf); -} - -static inline void eeh_readsw(const volatile void __iomem *addr, void * buf, - int ns) -{ - _insw(addr, buf, ns); - if (EEH_POSSIBLE_ERROR((*(((u16*)buf)+ns-1)), u16)) - eeh_check_failure(addr, *(u16*)buf); -} - -static inline void eeh_readsl(const volatile void __iomem *addr, void * buf, - int nl) -{ - _insl(addr, buf, nl); - if (EEH_POSSIBLE_ERROR((*(((u32*)buf)+nl-1)), u32)) - eeh_check_failure(addr, *(u32*)buf); -} - -#endif /* __KERNEL__ */ -#endif /* _PPC64_EEH_H */ diff --git a/include/asm-powerpc/eeh_event.h b/include/asm-powerpc/eeh_event.h deleted file mode 100644 index cc3cb04539ac..000000000000 --- a/include/asm-powerpc/eeh_event.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * eeh_event.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Copyright (c) 2005 Linas Vepstas - */ - -#ifndef ASM_POWERPC_EEH_EVENT_H -#define ASM_POWERPC_EEH_EVENT_H -#ifdef __KERNEL__ - -/** EEH event -- structure holding pci controller data that describes - * a change in the isolation status of a PCI slot. A pointer - * to this struct is passed as the data pointer in a notify callback. - */ -struct eeh_event { - struct list_head list; - struct device_node *dn; /* struct device node */ - struct pci_dev *dev; /* affected device */ -}; - -/** - * eeh_send_failure_event - generate a PCI error event - * @dev pci device - * - * This routine builds a PCI error event which will be delivered - * to all listeners on the eeh_notifier_chain. - * - * This routine can be called within an interrupt context; - * the actual event will be delivered in a normal context - * (from a workqueue). - */ -int eeh_send_failure_event (struct device_node *dn, - struct pci_dev *dev); - -/* Main recovery function */ -struct pci_dn * handle_eeh_events (struct eeh_event *); - -#endif /* __KERNEL__ */ -#endif /* ASM_POWERPC_EEH_EVENT_H */ diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h deleted file mode 100644 index 80d1f399ee51..000000000000 --- a/include/asm-powerpc/elf.h +++ /dev/null @@ -1,424 +0,0 @@ -#ifndef _ASM_POWERPC_ELF_H -#define _ASM_POWERPC_ELF_H - -#ifdef __KERNEL__ -#include /* for task_struct */ -#include -#include -#endif - -#include -#include -#include -#include - -/* PowerPC relocations defined by the ABIs */ -#define R_PPC_NONE 0 -#define R_PPC_ADDR32 1 /* 32bit absolute address */ -#define R_PPC_ADDR24 2 /* 26bit address, 2 bits ignored. */ -#define R_PPC_ADDR16 3 /* 16bit absolute address */ -#define R_PPC_ADDR16_LO 4 /* lower 16bit of absolute address */ -#define R_PPC_ADDR16_HI 5 /* high 16bit of absolute address */ -#define R_PPC_ADDR16_HA 6 /* adjusted high 16bit */ -#define R_PPC_ADDR14 7 /* 16bit address, 2 bits ignored */ -#define R_PPC_ADDR14_BRTAKEN 8 -#define R_PPC_ADDR14_BRNTAKEN 9 -#define R_PPC_REL24 10 /* PC relative 26 bit */ -#define R_PPC_REL14 11 /* PC relative 16 bit */ -#define R_PPC_REL14_BRTAKEN 12 -#define R_PPC_REL14_BRNTAKEN 13 -#define R_PPC_GOT16 14 -#define R_PPC_GOT16_LO 15 -#define R_PPC_GOT16_HI 16 -#define R_PPC_GOT16_HA 17 -#define R_PPC_PLTREL24 18 -#define R_PPC_COPY 19 -#define R_PPC_GLOB_DAT 20 -#define R_PPC_JMP_SLOT 21 -#define R_PPC_RELATIVE 22 -#define R_PPC_LOCAL24PC 23 -#define R_PPC_UADDR32 24 -#define R_PPC_UADDR16 25 -#define R_PPC_REL32 26 -#define R_PPC_PLT32 27 -#define R_PPC_PLTREL32 28 -#define R_PPC_PLT16_LO 29 -#define R_PPC_PLT16_HI 30 -#define R_PPC_PLT16_HA 31 -#define R_PPC_SDAREL16 32 -#define R_PPC_SECTOFF 33 -#define R_PPC_SECTOFF_LO 34 -#define R_PPC_SECTOFF_HI 35 -#define R_PPC_SECTOFF_HA 36 - -/* PowerPC relocations defined for the TLS access ABI. */ -#define R_PPC_TLS 67 /* none (sym+add)@tls */ -#define R_PPC_DTPMOD32 68 /* word32 (sym+add)@dtpmod */ -#define R_PPC_TPREL16 69 /* half16* (sym+add)@tprel */ -#define R_PPC_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */ -#define R_PPC_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */ -#define R_PPC_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */ -#define R_PPC_TPREL32 73 /* word32 (sym+add)@tprel */ -#define R_PPC_DTPREL16 74 /* half16* (sym+add)@dtprel */ -#define R_PPC_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */ -#define R_PPC_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */ -#define R_PPC_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */ -#define R_PPC_DTPREL32 78 /* word32 (sym+add)@dtprel */ -#define R_PPC_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */ -#define R_PPC_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */ -#define R_PPC_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */ -#define R_PPC_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */ -#define R_PPC_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */ -#define R_PPC_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */ -#define R_PPC_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */ -#define R_PPC_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */ -#define R_PPC_GOT_TPREL16 87 /* half16* (sym+add)@got@tprel */ -#define R_PPC_GOT_TPREL16_LO 88 /* half16 (sym+add)@got@tprel@l */ -#define R_PPC_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */ -#define R_PPC_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */ -#define R_PPC_GOT_DTPREL16 91 /* half16* (sym+add)@got@dtprel */ -#define R_PPC_GOT_DTPREL16_LO 92 /* half16* (sym+add)@got@dtprel@l */ -#define R_PPC_GOT_DTPREL16_HI 93 /* half16* (sym+add)@got@dtprel@h */ -#define R_PPC_GOT_DTPREL16_HA 94 /* half16* (sym+add)@got@dtprel@ha */ - -/* keep this the last entry. */ -#define R_PPC_NUM 95 - -/* - * ELF register definitions.. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define ELF_NGREG 48 /* includes nip, msr, lr, etc. */ -#define ELF_NFPREG 33 /* includes fpscr */ - -typedef unsigned long elf_greg_t64; -typedef elf_greg_t64 elf_gregset_t64[ELF_NGREG]; - -typedef unsigned int elf_greg_t32; -typedef elf_greg_t32 elf_gregset_t32[ELF_NGREG]; -typedef elf_gregset_t32 compat_elf_gregset_t; - -/* - * ELF_ARCH, CLASS, and DATA are used to set parameters in the core dumps. - */ -#ifdef __powerpc64__ -# define ELF_NVRREG32 33 /* includes vscr & vrsave stuffed together */ -# define ELF_NVRREG 34 /* includes vscr & vrsave in split vectors */ -# define ELF_NVSRHALFREG 32 /* Half the vsx registers */ -# define ELF_GREG_TYPE elf_greg_t64 -#else -# define ELF_NEVRREG 34 /* includes acc (as 2) */ -# define ELF_NVRREG 33 /* includes vscr */ -# define ELF_GREG_TYPE elf_greg_t32 -# define ELF_ARCH EM_PPC -# define ELF_CLASS ELFCLASS32 -# define ELF_DATA ELFDATA2MSB -#endif /* __powerpc64__ */ - -#ifndef ELF_ARCH -# define ELF_ARCH EM_PPC64 -# define ELF_CLASS ELFCLASS64 -# define ELF_DATA ELFDATA2MSB - typedef elf_greg_t64 elf_greg_t; - typedef elf_gregset_t64 elf_gregset_t; -#else - /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */ - typedef elf_greg_t32 elf_greg_t; - typedef elf_gregset_t32 elf_gregset_t; -#endif /* ELF_ARCH */ - -/* Floating point registers */ -typedef double elf_fpreg_t; -typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; - -/* Altivec registers */ -/* - * The entries with indexes 0-31 contain the corresponding vector registers. - * The entry with index 32 contains the vscr as the last word (offset 12) - * within the quadword. This allows the vscr to be stored as either a - * quadword (since it must be copied via a vector register to/from storage) - * or as a word. - * - * 64-bit kernel notes: The entry at index 33 contains the vrsave as the first - * word (offset 0) within the quadword. - * - * This definition of the VMX state is compatible with the current PPC32 - * ptrace interface. This allows signal handling and ptrace to use the same - * structures. This also simplifies the implementation of a bi-arch - * (combined (32- and 64-bit) gdb. - * - * Note that it's _not_ compatible with 32 bits ucontext which stuffs the - * vrsave along with vscr and so only uses 33 vectors for the register set - */ -typedef __vector128 elf_vrreg_t; -typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG]; -#ifdef __powerpc64__ -typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32]; -typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG]; -#endif - -#ifdef __KERNEL__ -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH) -#define compat_elf_check_arch(x) ((x)->e_machine == EM_PPC) - -#define USE_ELF_CORE_DUMP -#define CORE_DUMP_USE_REGSET -#define ELF_EXEC_PAGESIZE PAGE_SIZE - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE (0x20000000) - -/* - * Our registers are always unsigned longs, whether we're a 32 bit - * process or 64 bit, on either a 64 bit or 32 bit kernel. - * - * This macro relies on elf_regs[i] having the right type to truncate to, - * either u32 or u64. It defines the body of the elf_core_copy_regs - * function, either the native one with elf_gregset_t elf_regs or - * the 32-bit one with elf_gregset_t32 elf_regs. - */ -#define PPC_ELF_CORE_COPY_REGS(elf_regs, regs) \ - int i, nregs = min(sizeof(*regs) / sizeof(unsigned long), \ - (size_t)ELF_NGREG); \ - for (i = 0; i < nregs; i++) \ - elf_regs[i] = ((unsigned long *) regs)[i]; \ - memset(&elf_regs[i], 0, (ELF_NGREG - i) * sizeof(elf_regs[0])) - -/* Common routine for both 32-bit and 64-bit native processes */ -static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs, - struct pt_regs *regs) -{ - PPC_ELF_CORE_COPY_REGS(elf_regs, regs); -} -#define ELF_CORE_COPY_REGS(gregs, regs) ppc_elf_core_copy_regs(gregs, regs); - -typedef elf_vrregset_t elf_fpxregset_t; - -/* ELF_HWCAP yields a mask that user programs can use to figure out what - instruction set this cpu supports. This could be done in userspace, - but it's not easy, and we've already done it here. */ -# define ELF_HWCAP (cur_cpu_spec->cpu_user_features) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. */ - -#define ELF_PLATFORM (cur_cpu_spec->platform) - -/* While ELF_PLATFORM indicates the ISA supported by the platform, it - * may not accurately reflect the underlying behavior of the hardware - * (as in the case of running in Power5+ compatibility mode on a - * Power6 machine). ELF_BASE_PLATFORM allows ld.so to load libraries - * that are tuned for the real hardware. - */ -#define ELF_BASE_PLATFORM (powerpc_base_platform) - -#ifdef __powerpc64__ -# define ELF_PLAT_INIT(_r, load_addr) do { \ - _r->gpr[2] = load_addr; \ -} while (0) -#endif /* __powerpc64__ */ - -#ifdef __powerpc64__ -# define SET_PERSONALITY(ex, ibcs2) \ -do { \ - unsigned long new_flags = 0; \ - if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ - new_flags = _TIF_32BIT; \ - if ((current_thread_info()->flags & _TIF_32BIT) \ - != new_flags) \ - set_thread_flag(TIF_ABI_PENDING); \ - else \ - clear_thread_flag(TIF_ABI_PENDING); \ - if (personality(current->personality) != PER_LINUX32) \ - set_personality(PER_LINUX | \ - (current->personality & (~PER_MASK))); \ -} while (0) -/* - * An executable for which elf_read_implies_exec() returns TRUE will - * have the READ_IMPLIES_EXEC personality flag set automatically. This - * is only required to work around bugs in old 32bit toolchains. Since - * the 64bit ABI has never had these issues dont enable the workaround - * even if we have an executable stack. - */ -# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \ - (exec_stk != EXSTACK_DISABLE_X) : 0) -#else -# define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) -#endif /* __powerpc64__ */ - -extern int dcache_bsize; -extern int icache_bsize; -extern int ucache_bsize; - -/* vDSO has arch_setup_additional_pages */ -#define ARCH_HAS_SETUP_ADDITIONAL_PAGES -struct linux_binprm; -extern int arch_setup_additional_pages(struct linux_binprm *bprm, - int executable_stack); -#define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b); - -#endif /* __KERNEL__ */ - -/* - * The requirements here are: - * - keep the final alignment of sp (sp & 0xf) - * - make sure the 32-bit value at the first 16 byte aligned position of - * AUXV is greater than 16 for glibc compatibility. - * AT_IGNOREPPC is used for that. - * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC, - * even if DLINFO_ARCH_ITEMS goes to zero or is undefined. - * update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes - */ -#define ARCH_DLINFO \ -do { \ - /* Handle glibc compatibility. */ \ - NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \ - NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \ - /* Cache size items */ \ - NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize); \ - NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize); \ - NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize); \ - VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base) \ -} while (0) - -/* PowerPC64 relocations defined by the ABIs */ -#define R_PPC64_NONE R_PPC_NONE -#define R_PPC64_ADDR32 R_PPC_ADDR32 /* 32bit absolute address. */ -#define R_PPC64_ADDR24 R_PPC_ADDR24 /* 26bit address, word aligned. */ -#define R_PPC64_ADDR16 R_PPC_ADDR16 /* 16bit absolute address. */ -#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of abs. address. */ -#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of abs. address. */ -#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits. */ -#define R_PPC64_ADDR14 R_PPC_ADDR14 /* 16bit address, word aligned. */ -#define R_PPC64_ADDR14_BRTAKEN R_PPC_ADDR14_BRTAKEN -#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN -#define R_PPC64_REL24 R_PPC_REL24 /* PC relative 26 bit, word aligned. */ -#define R_PPC64_REL14 R_PPC_REL14 /* PC relative 16 bit. */ -#define R_PPC64_REL14_BRTAKEN R_PPC_REL14_BRTAKEN -#define R_PPC64_REL14_BRNTAKEN R_PPC_REL14_BRNTAKEN -#define R_PPC64_GOT16 R_PPC_GOT16 -#define R_PPC64_GOT16_LO R_PPC_GOT16_LO -#define R_PPC64_GOT16_HI R_PPC_GOT16_HI -#define R_PPC64_GOT16_HA R_PPC_GOT16_HA - -#define R_PPC64_COPY R_PPC_COPY -#define R_PPC64_GLOB_DAT R_PPC_GLOB_DAT -#define R_PPC64_JMP_SLOT R_PPC_JMP_SLOT -#define R_PPC64_RELATIVE R_PPC_RELATIVE - -#define R_PPC64_UADDR32 R_PPC_UADDR32 -#define R_PPC64_UADDR16 R_PPC_UADDR16 -#define R_PPC64_REL32 R_PPC_REL32 -#define R_PPC64_PLT32 R_PPC_PLT32 -#define R_PPC64_PLTREL32 R_PPC_PLTREL32 -#define R_PPC64_PLT16_LO R_PPC_PLT16_LO -#define R_PPC64_PLT16_HI R_PPC_PLT16_HI -#define R_PPC64_PLT16_HA R_PPC_PLT16_HA - -#define R_PPC64_SECTOFF R_PPC_SECTOFF -#define R_PPC64_SECTOFF_LO R_PPC_SECTOFF_LO -#define R_PPC64_SECTOFF_HI R_PPC_SECTOFF_HI -#define R_PPC64_SECTOFF_HA R_PPC_SECTOFF_HA -#define R_PPC64_ADDR30 37 /* word30 (S + A - P) >> 2. */ -#define R_PPC64_ADDR64 38 /* doubleword64 S + A. */ -#define R_PPC64_ADDR16_HIGHER 39 /* half16 #higher(S + A). */ -#define R_PPC64_ADDR16_HIGHERA 40 /* half16 #highera(S + A). */ -#define R_PPC64_ADDR16_HIGHEST 41 /* half16 #highest(S + A). */ -#define R_PPC64_ADDR16_HIGHESTA 42 /* half16 #highesta(S + A). */ -#define R_PPC64_UADDR64 43 /* doubleword64 S + A. */ -#define R_PPC64_REL64 44 /* doubleword64 S + A - P. */ -#define R_PPC64_PLT64 45 /* doubleword64 L + A. */ -#define R_PPC64_PLTREL64 46 /* doubleword64 L + A - P. */ -#define R_PPC64_TOC16 47 /* half16* S + A - .TOC. */ -#define R_PPC64_TOC16_LO 48 /* half16 #lo(S + A - .TOC.). */ -#define R_PPC64_TOC16_HI 49 /* half16 #hi(S + A - .TOC.). */ -#define R_PPC64_TOC16_HA 50 /* half16 #ha(S + A - .TOC.). */ -#define R_PPC64_TOC 51 /* doubleword64 .TOC. */ -#define R_PPC64_PLTGOT16 52 /* half16* M + A. */ -#define R_PPC64_PLTGOT16_LO 53 /* half16 #lo(M + A). */ -#define R_PPC64_PLTGOT16_HI 54 /* half16 #hi(M + A). */ -#define R_PPC64_PLTGOT16_HA 55 /* half16 #ha(M + A). */ - -#define R_PPC64_ADDR16_DS 56 /* half16ds* (S + A) >> 2. */ -#define R_PPC64_ADDR16_LO_DS 57 /* half16ds #lo(S + A) >> 2. */ -#define R_PPC64_GOT16_DS 58 /* half16ds* (G + A) >> 2. */ -#define R_PPC64_GOT16_LO_DS 59 /* half16ds #lo(G + A) >> 2. */ -#define R_PPC64_PLT16_LO_DS 60 /* half16ds #lo(L + A) >> 2. */ -#define R_PPC64_SECTOFF_DS 61 /* half16ds* (R + A) >> 2. */ -#define R_PPC64_SECTOFF_LO_DS 62 /* half16ds #lo(R + A) >> 2. */ -#define R_PPC64_TOC16_DS 63 /* half16ds* (S + A - .TOC.) >> 2. */ -#define R_PPC64_TOC16_LO_DS 64 /* half16ds #lo(S + A - .TOC.) >> 2. */ -#define R_PPC64_PLTGOT16_DS 65 /* half16ds* (M + A) >> 2. */ -#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds #lo(M + A) >> 2. */ - -/* PowerPC64 relocations defined for the TLS access ABI. */ -#define R_PPC64_TLS 67 /* none (sym+add)@tls */ -#define R_PPC64_DTPMOD64 68 /* doubleword64 (sym+add)@dtpmod */ -#define R_PPC64_TPREL16 69 /* half16* (sym+add)@tprel */ -#define R_PPC64_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */ -#define R_PPC64_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */ -#define R_PPC64_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */ -#define R_PPC64_TPREL64 73 /* doubleword64 (sym+add)@tprel */ -#define R_PPC64_DTPREL16 74 /* half16* (sym+add)@dtprel */ -#define R_PPC64_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */ -#define R_PPC64_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */ -#define R_PPC64_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */ -#define R_PPC64_DTPREL64 78 /* doubleword64 (sym+add)@dtprel */ -#define R_PPC64_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */ -#define R_PPC64_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */ -#define R_PPC64_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */ -#define R_PPC64_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */ -#define R_PPC64_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */ -#define R_PPC64_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */ -#define R_PPC64_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */ -#define R_PPC64_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */ -#define R_PPC64_GOT_TPREL16_DS 87 /* half16ds* (sym+add)@got@tprel */ -#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */ -#define R_PPC64_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */ -#define R_PPC64_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */ -#define R_PPC64_GOT_DTPREL16_DS 91 /* half16ds* (sym+add)@got@dtprel */ -#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */ -#define R_PPC64_GOT_DTPREL16_HI 93 /* half16 (sym+add)@got@dtprel@h */ -#define R_PPC64_GOT_DTPREL16_HA 94 /* half16 (sym+add)@got@dtprel@ha */ -#define R_PPC64_TPREL16_DS 95 /* half16ds* (sym+add)@tprel */ -#define R_PPC64_TPREL16_LO_DS 96 /* half16ds (sym+add)@tprel@l */ -#define R_PPC64_TPREL16_HIGHER 97 /* half16 (sym+add)@tprel@higher */ -#define R_PPC64_TPREL16_HIGHERA 98 /* half16 (sym+add)@tprel@highera */ -#define R_PPC64_TPREL16_HIGHEST 99 /* half16 (sym+add)@tprel@highest */ -#define R_PPC64_TPREL16_HIGHESTA 100 /* half16 (sym+add)@tprel@highesta */ -#define R_PPC64_DTPREL16_DS 101 /* half16ds* (sym+add)@dtprel */ -#define R_PPC64_DTPREL16_LO_DS 102 /* half16ds (sym+add)@dtprel@l */ -#define R_PPC64_DTPREL16_HIGHER 103 /* half16 (sym+add)@dtprel@higher */ -#define R_PPC64_DTPREL16_HIGHERA 104 /* half16 (sym+add)@dtprel@highera */ -#define R_PPC64_DTPREL16_HIGHEST 105 /* half16 (sym+add)@dtprel@highest */ -#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16 (sym+add)@dtprel@highesta */ - -/* Keep this the last entry. */ -#define R_PPC64_NUM 107 - -#ifdef __KERNEL__ - -#ifdef CONFIG_SPU_BASE -/* Notes used in ET_CORE. Note name is "SPU//". */ -#define NT_SPU 1 - -#define ARCH_HAVE_EXTRA_ELF_NOTES - -#endif /* CONFIG_SPU_BASE */ - -#endif /* __KERNEL */ - -#endif /* _ASM_POWERPC_ELF_H */ diff --git a/include/asm-powerpc/emergency-restart.h b/include/asm-powerpc/emergency-restart.h deleted file mode 100644 index 3711bd9d50bd..000000000000 --- a/include/asm-powerpc/emergency-restart.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-powerpc/errno.h b/include/asm-powerpc/errno.h deleted file mode 100644 index 8c145fd17d86..000000000000 --- a/include/asm-powerpc/errno.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _ASM_POWERPC_ERRNO_H -#define _ASM_POWERPC_ERRNO_H - -#include - -#undef EDEADLOCK -#define EDEADLOCK 58 /* File locking deadlock error */ - -#define _LAST_ERRNO 516 - -#endif /* _ASM_POWERPC_ERRNO_H */ diff --git a/include/asm-powerpc/exception.h b/include/asm-powerpc/exception.h deleted file mode 100644 index 329148b5acc6..000000000000 --- a/include/asm-powerpc/exception.h +++ /dev/null @@ -1,311 +0,0 @@ -#ifndef _ASM_POWERPC_EXCEPTION_H -#define _ASM_POWERPC_EXCEPTION_H -/* - * Extracted from head_64.S - * - * PowerPC version - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP - * Copyright (C) 1996 Cort Dougan - * Adapted for Power Macintosh by Paul Mackerras. - * Low-level exception handlers and MMU support - * rewritten by Paul Mackerras. - * Copyright (C) 1996 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and - * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com - * - * This file contains the low-level support and setup for the - * PowerPC-64 platform, including trap and interrupt dispatch. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -/* - * The following macros define the code that appears as - * the prologue to each of the exception handlers. They - * are split into two parts to allow a single kernel binary - * to be used for pSeries and iSeries. - * - * We make as much of the exception code common between native - * exception handlers (including pSeries LPAR) and iSeries LPAR - * implementations as possible. - */ - -#define EX_R9 0 -#define EX_R10 8 -#define EX_R11 16 -#define EX_R12 24 -#define EX_R13 32 -#define EX_SRR0 40 -#define EX_DAR 48 -#define EX_DSISR 56 -#define EX_CCR 60 -#define EX_R3 64 -#define EX_LR 72 - -/* - * We're short on space and time in the exception prolog, so we can't - * use the normal SET_REG_IMMEDIATE macro. Normally we just need the - * low halfword of the address, but for Kdump we need the whole low - * word. - */ -#ifdef CONFIG_CRASH_DUMP -#define LOAD_HANDLER(reg, label) \ - oris reg,reg,(label)@h; /* virt addr of handler ... */ \ - ori reg,reg,(label)@l; /* .. and the rest */ -#else -#define LOAD_HANDLER(reg, label) \ - ori reg,reg,(label)@l; /* virt addr of handler ... */ -#endif - -#define EXCEPTION_PROLOG_1(area) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - std r11,area+EX_R11(r13); \ - std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ - std r9,area+EX_R13(r13); \ - mfcr r9 - -/* - * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode. - * The firmware calls the registered system_reset_fwnmi and - * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run - * a 32bit application at the time of the event. - * This firmware bug is present on POWER4 and JS20. - */ -#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label) \ - EXCEPTION_PROLOG_1(area); \ - clrrdi r12,r13,32; /* get high part of &label */ \ - mfmsr r10; \ - /* force 64bit mode */ \ - li r11,5; /* MSR_SF_LG|MSR_ISF_LG */ \ - rldimi r10,r11,61,0; /* insert into top 3 bits */ \ - /* done 64bit mode */ \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - LOAD_HANDLER(r12,label) \ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -#define EXCEPTION_PROLOG_PSERIES(area, label) \ - EXCEPTION_PROLOG_1(area); \ - clrrdi r12,r13,32; /* get high part of &label */ \ - mfmsr r10; \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - LOAD_HANDLER(r12,label) \ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -/* - * The common exception prolog is used for all except a few exceptions - * such as a segment miss on a kernel address. We have to be prepared - * to take another exception from the point where we first touch the - * kernel stack onwards. - * - * On entry r13 points to the paca, r9-r13 are saved in the paca, - * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and - * SRR1, and relocation is on. - */ -#define EXCEPTION_PROLOG_COMMON(n, area) \ - andi. r10,r12,MSR_PR; /* See if coming from user */ \ - mr r10,r1; /* Save r1 */ \ - subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ - beq- 1f; \ - ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ -1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ - bge- cr1,2f; /* abort if it is */ \ - b 3f; \ -2: li r1,(n); /* will be reloaded later */ \ - sth r1,PACA_TRAP_SAVE(r13); \ - b bad_stack; \ -3: std r9,_CCR(r1); /* save CR in stackframe */ \ - std r11,_NIP(r1); /* save SRR0 in stackframe */ \ - std r12,_MSR(r1); /* save SRR1 in stackframe */ \ - std r10,0(r1); /* make stack chain pointer */ \ - std r0,GPR0(r1); /* save r0 in stackframe */ \ - std r10,GPR1(r1); /* save r1 in stackframe */ \ - ACCOUNT_CPU_USER_ENTRY(r9, r10); \ - std r2,GPR2(r1); /* save r2 in stackframe */ \ - SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ - SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ - ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ - ld r10,area+EX_R10(r13); \ - std r9,GPR9(r1); \ - std r10,GPR10(r1); \ - ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \ - ld r10,area+EX_R12(r13); \ - ld r11,area+EX_R13(r13); \ - std r9,GPR11(r1); \ - std r10,GPR12(r1); \ - std r11,GPR13(r1); \ - ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ - mflr r9; /* save LR in stackframe */ \ - std r9,_LINK(r1); \ - mfctr r10; /* save CTR in stackframe */ \ - std r10,_CTR(r1); \ - lbz r10,PACASOFTIRQEN(r13); \ - mfspr r11,SPRN_XER; /* save XER in stackframe */ \ - std r10,SOFTE(r1); \ - std r11,_XER(r1); \ - li r9,(n)+1; \ - std r9,_TRAP(r1); /* set trap number */ \ - li r10,0; \ - ld r11,exception_marker@toc(r2); \ - std r10,RESULT(r1); /* clear regs->result */ \ - std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ - -/* - * Exception vectors. - */ -#define STD_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) - -#define HSTD_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r20; /* save r20 */ \ - mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \ - mtspr SPRN_SRR0,r20; \ - mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \ - mtspr SPRN_SRR1,r20; \ - mfspr r20,SPRN_SPRG1; /* restore r20 */ \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) - - -#define MASKABLE_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \ - std r10,PACA_EXGEN+EX_R10(r13); \ - lbz r10,PACASOFTIRQEN(r13); \ - mfcr r9; \ - cmpwi r10,0; \ - beq masked_interrupt; \ - mfspr r10,SPRN_SPRG1; \ - std r10,PACA_EXGEN+EX_R13(r13); \ - std r11,PACA_EXGEN+EX_R11(r13); \ - std r12,PACA_EXGEN+EX_R12(r13); \ - clrrdi r12,r13,32; /* get high part of &label */ \ - mfmsr r10; \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - LOAD_HANDLER(r12,label##_common) \ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -#ifdef CONFIG_PPC_ISERIES -#define DISABLE_INTS \ - li r11,0; \ - stb r11,PACASOFTIRQEN(r13); \ -BEGIN_FW_FTR_SECTION; \ - stb r11,PACAHARDIRQEN(r13); \ -END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ - TRACE_DISABLE_INTS; \ -BEGIN_FW_FTR_SECTION; \ - mfmsr r10; \ - ori r10,r10,MSR_EE; \ - mtmsrd r10,1; \ -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#else -#define DISABLE_INTS \ - li r11,0; \ - stb r11,PACASOFTIRQEN(r13); \ - stb r11,PACAHARDIRQEN(r13); \ - TRACE_DISABLE_INTS -#endif /* CONFIG_PPC_ISERIES */ - -#define ENABLE_INTS \ - ld r12,_MSR(r1); \ - mfmsr r11; \ - rlwimi r11,r12,0,MSR_EE; \ - mtmsrd r11,1 - -#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - DISABLE_INTS; \ - bl .save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except - -/* - * Like STD_EXCEPTION_COMMON, but for exceptions that can occur - * in the idle task and therefore need the special idle handling. - */ -#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - FINISH_NAP; \ - DISABLE_INTS; \ - bl .save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except - -#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - FINISH_NAP; \ - DISABLE_INTS; \ -BEGIN_FTR_SECTION \ - bl .ppc64_runlatch_on; \ -END_FTR_SECTION_IFSET(CPU_FTR_CTRL) \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except_lite - -/* - * When the idle code in power4_idle puts the CPU into NAP mode, - * it has to do so in a loop, and relies on the external interrupt - * and decrementer interrupt entry code to get it out of the loop. - * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags - * to signal that it is in the loop and needs help to get out. - */ -#ifdef CONFIG_PPC_970_NAP -#define FINISH_NAP \ -BEGIN_FTR_SECTION \ - clrrdi r11,r1,THREAD_SHIFT; \ - ld r9,TI_LOCAL_FLAGS(r11); \ - andi. r10,r9,_TLF_NAPPING; \ - bnel power4_fixup_nap; \ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) -#else -#define FINISH_NAP -#endif - -#endif /* _ASM_POWERPC_EXCEPTION_H */ diff --git a/include/asm-powerpc/fb.h b/include/asm-powerpc/fb.h deleted file mode 100644 index 411af8d17a69..000000000000 --- a/include/asm-powerpc/fb.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ - -#include -#include -#include - -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - vma->vm_page_prot = phys_mem_access_prot(file, off >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, - vma->vm_page_prot); -} - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-powerpc/fcntl.h b/include/asm-powerpc/fcntl.h deleted file mode 100644 index ce5c4516d404..000000000000 --- a/include/asm-powerpc/fcntl.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _ASM_FCNTL_H -#define _ASM_FCNTL_H - -#define O_DIRECTORY 040000 /* must be a directory */ -#define O_NOFOLLOW 0100000 /* don't follow links */ -#define O_LARGEFILE 0200000 -#define O_DIRECT 0400000 /* direct disk access hint */ - -#include - -#endif /* _ASM_FCNTL_H */ diff --git a/include/asm-powerpc/feature-fixups.h b/include/asm-powerpc/feature-fixups.h deleted file mode 100644 index a1029967620b..000000000000 --- a/include/asm-powerpc/feature-fixups.h +++ /dev/null @@ -1,126 +0,0 @@ -#ifndef __ASM_POWERPC_FEATURE_FIXUPS_H -#define __ASM_POWERPC_FEATURE_FIXUPS_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifdef __ASSEMBLY__ - -/* - * Feature section common macros - * - * Note that the entries now contain offsets between the table entry - * and the code rather than absolute code pointers in order to be - * useable with the vdso shared library. There is also an assumption - * that values will be negative, that is, the fixup table has to be - * located after the code it fixes up. - */ -#if defined(CONFIG_PPC64) && !defined(__powerpc64__) -/* 64 bits kernel, 32 bits code (ie. vdso32) */ -#define FTR_ENTRY_LONG .llong -#define FTR_ENTRY_OFFSET .long 0xffffffff; .long -#else -/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */ -#define FTR_ENTRY_LONG PPC_LONG -#define FTR_ENTRY_OFFSET PPC_LONG -#endif - -#define START_FTR_SECTION(label) label##1: - -#define FTR_SECTION_ELSE_NESTED(label) \ -label##2: \ - .pushsection __ftr_alt_##label,"a"; \ - .align 2; \ -label##3: - -#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ -label##4: \ - .popsection; \ - .pushsection sect,"a"; \ - .align 3; \ -label##5: \ - FTR_ENTRY_LONG msk; \ - FTR_ENTRY_LONG val; \ - FTR_ENTRY_OFFSET label##1b-label##5b; \ - FTR_ENTRY_OFFSET label##2b-label##5b; \ - FTR_ENTRY_OFFSET label##3b-label##5b; \ - FTR_ENTRY_OFFSET label##4b-label##5b; \ - .popsection; - - -/* CPU feature dependent sections */ -#define BEGIN_FTR_SECTION_NESTED(label) START_FTR_SECTION(label) -#define BEGIN_FTR_SECTION START_FTR_SECTION(97) - -#define END_FTR_SECTION_NESTED(msk, val, label) \ - FTR_SECTION_ELSE_NESTED(label) \ - MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) - -#define END_FTR_SECTION(msk, val) \ - END_FTR_SECTION_NESTED(msk, val, 97) - -#define END_FTR_SECTION_IFSET(msk) END_FTR_SECTION((msk), (msk)) -#define END_FTR_SECTION_IFCLR(msk) END_FTR_SECTION((msk), 0) - -/* CPU feature sections with alternatives, use BEGIN_FTR_SECTION to start */ -#define FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97) -#define ALT_FTR_SECTION_END_NESTED(msk, val, label) \ - MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) -#define ALT_FTR_SECTION_END_NESTED_IFSET(msk, label) \ - ALT_FTR_SECTION_END_NESTED(msk, msk, label) -#define ALT_FTR_SECTION_END_NESTED_IFCLR(msk, label) \ - ALT_FTR_SECTION_END_NESTED(msk, 0, label) -#define ALT_FTR_SECTION_END(msk, val) \ - ALT_FTR_SECTION_END_NESTED(msk, val, 97) -#define ALT_FTR_SECTION_END_IFSET(msk) \ - ALT_FTR_SECTION_END_NESTED_IFSET(msk, 97) -#define ALT_FTR_SECTION_END_IFCLR(msk) \ - ALT_FTR_SECTION_END_NESTED_IFCLR(msk, 97) - -/* Firmware feature dependent sections */ -#define BEGIN_FW_FTR_SECTION_NESTED(label) START_FTR_SECTION(label) -#define BEGIN_FW_FTR_SECTION START_FTR_SECTION(97) - -#define END_FW_FTR_SECTION_NESTED(msk, val, label) \ - FTR_SECTION_ELSE_NESTED(label) \ - MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) - -#define END_FW_FTR_SECTION(msk, val) \ - END_FW_FTR_SECTION_NESTED(msk, val, 97) - -#define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk)) -#define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0) - -/* Firmware feature sections with alternatives */ -#define FW_FTR_SECTION_ELSE_NESTED(label) FTR_SECTION_ELSE_NESTED(label) -#define FW_FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97) -#define ALT_FW_FTR_SECTION_END_NESTED(msk, val, label) \ - MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) -#define ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, label) \ - ALT_FW_FTR_SECTION_END_NESTED(msk, msk, label) -#define ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, label) \ - ALT_FW_FTR_SECTION_END_NESTED(msk, 0, label) -#define ALT_FW_FTR_SECTION_END(msk, val) \ - ALT_FW_FTR_SECTION_END_NESTED(msk, val, 97) -#define ALT_FW_FTR_SECTION_END_IFSET(msk) \ - ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, 97) -#define ALT_FW_FTR_SECTION_END_IFCLR(msk) \ - ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97) - -#endif /* __ASSEMBLY__ */ - -/* LWSYNC feature sections */ -#define START_LWSYNC_SECTION(label) label##1: -#define MAKE_LWSYNC_SECTION_ENTRY(label, sect) \ -label##2: \ - .pushsection sect,"a"; \ - .align 2; \ -label##3: \ - .long label##1b-label##3b; \ - .popsection; - -#endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */ diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h deleted file mode 100644 index 3a179827528d..000000000000 --- a/include/asm-powerpc/firmware.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * Modifications for ppc64: - * Copyright (C) 2003 Dave Engebretsen - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_POWERPC_FIRMWARE_H -#define __ASM_POWERPC_FIRMWARE_H - -#ifdef __KERNEL__ - -#include -#include - -/* firmware feature bitmask values */ -#define FIRMWARE_MAX_FEATURES 63 - -#define FW_FEATURE_PFT ASM_CONST(0x0000000000000001) -#define FW_FEATURE_TCE ASM_CONST(0x0000000000000002) -#define FW_FEATURE_SPRG0 ASM_CONST(0x0000000000000004) -#define FW_FEATURE_DABR ASM_CONST(0x0000000000000008) -#define FW_FEATURE_COPY ASM_CONST(0x0000000000000010) -#define FW_FEATURE_ASR ASM_CONST(0x0000000000000020) -#define FW_FEATURE_DEBUG ASM_CONST(0x0000000000000040) -#define FW_FEATURE_TERM ASM_CONST(0x0000000000000080) -#define FW_FEATURE_PERF ASM_CONST(0x0000000000000100) -#define FW_FEATURE_DUMP ASM_CONST(0x0000000000000200) -#define FW_FEATURE_INTERRUPT ASM_CONST(0x0000000000000400) -#define FW_FEATURE_MIGRATE ASM_CONST(0x0000000000000800) -#define FW_FEATURE_PERFMON ASM_CONST(0x0000000000001000) -#define FW_FEATURE_CRQ ASM_CONST(0x0000000000002000) -#define FW_FEATURE_VIO ASM_CONST(0x0000000000004000) -#define FW_FEATURE_RDMA ASM_CONST(0x0000000000008000) -#define FW_FEATURE_LLAN ASM_CONST(0x0000000000010000) -#define FW_FEATURE_BULK ASM_CONST(0x0000000000020000) -#define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000) -#define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000) -#define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000) -#define FW_FEATURE_ISERIES ASM_CONST(0x0000000000200000) -#define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000) -#define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000) -#define FW_FEATURE_BEAT ASM_CONST(0x0000000001000000) -#define FW_FEATURE_BULK_REMOVE ASM_CONST(0x0000000002000000) -#define FW_FEATURE_CMO ASM_CONST(0x0000000004000000) - -#ifndef __ASSEMBLY__ - -enum { -#ifdef CONFIG_PPC64 - FW_FEATURE_PSERIES_POSSIBLE = FW_FEATURE_PFT | FW_FEATURE_TCE | - FW_FEATURE_SPRG0 | FW_FEATURE_DABR | FW_FEATURE_COPY | - FW_FEATURE_ASR | FW_FEATURE_DEBUG | FW_FEATURE_TERM | - FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT | - FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ | - FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN | - FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE | - FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO, - FW_FEATURE_PSERIES_ALWAYS = 0, - FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, - FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, - FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, - FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, - FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT, - FW_FEATURE_CELLEB_ALWAYS = 0, - FW_FEATURE_NATIVE_POSSIBLE = 0, - FW_FEATURE_NATIVE_ALWAYS = 0, - FW_FEATURE_POSSIBLE = -#ifdef CONFIG_PPC_PSERIES - FW_FEATURE_PSERIES_POSSIBLE | -#endif -#ifdef CONFIG_PPC_ISERIES - FW_FEATURE_ISERIES_POSSIBLE | -#endif -#ifdef CONFIG_PPC_PS3 - FW_FEATURE_PS3_POSSIBLE | -#endif -#ifdef CONFIG_PPC_CELLEB - FW_FEATURE_CELLEB_POSSIBLE | -#endif -#ifdef CONFIG_PPC_NATIVE - FW_FEATURE_NATIVE_ALWAYS | -#endif - 0, - FW_FEATURE_ALWAYS = -#ifdef CONFIG_PPC_PSERIES - FW_FEATURE_PSERIES_ALWAYS & -#endif -#ifdef CONFIG_PPC_ISERIES - FW_FEATURE_ISERIES_ALWAYS & -#endif -#ifdef CONFIG_PPC_PS3 - FW_FEATURE_PS3_ALWAYS & -#endif -#ifdef CONFIG_PPC_CELLEB - FW_FEATURE_CELLEB_ALWAYS & -#endif -#ifdef CONFIG_PPC_NATIVE - FW_FEATURE_NATIVE_ALWAYS & -#endif - FW_FEATURE_POSSIBLE, - -#else /* CONFIG_PPC64 */ - FW_FEATURE_POSSIBLE = 0, - FW_FEATURE_ALWAYS = 0, -#endif -}; - -/* This is used to identify firmware features which are available - * to the kernel. - */ -extern unsigned long powerpc_firmware_features; - -#define firmware_has_feature(feature) \ - ((FW_FEATURE_ALWAYS & (feature)) || \ - (FW_FEATURE_POSSIBLE & powerpc_firmware_features & (feature))) - -extern void system_reset_fwnmi(void); -extern void machine_check_fwnmi(void); - -/* This is true if we are using the firmware NMI handler (typically LPAR) */ -extern int fwnmi_active; - -extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup; - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_FIRMWARE_H */ diff --git a/include/asm-powerpc/fixmap.h b/include/asm-powerpc/fixmap.h deleted file mode 100644 index 8428b38a3d30..000000000000 --- a/include/asm-powerpc/fixmap.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * fixmap.h: compile-time virtual memory allocation - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998 Ingo Molnar - * - * Copyright 2008 Freescale Semiconductor Inc. - * Port to powerpc added by Kumar Gala - */ - -#ifndef _ASM_FIXMAP_H -#define _ASM_FIXMAP_H - -extern unsigned long FIXADDR_TOP; - -#ifndef __ASSEMBLY__ -#include -#include -#ifdef CONFIG_HIGHMEM -#include -#include -#endif - -/* - * Here we define all the compile-time 'special' virtual - * addresses. The point is to have a constant address at - * compile time, but to set the physical address only - * in the boot process. We allocate these special addresses - * from the end of virtual memory (0xfffff000) backwards. - * Also this lets us do fail-safe vmalloc(), we - * can guarantee that these special addresses and - * vmalloc()-ed addresses never overlap. - * - * these 'compile-time allocated' memory buffers are - * fixed-size 4k pages. (or larger if used with an increment - * highger than 1) use fixmap_set(idx,phys) to associate - * physical memory with fixmap indices. - * - * TLB entries of such buffers will not be flushed across - * task switches. - */ -enum fixed_addresses { - FIX_HOLE, -#ifdef CONFIG_HIGHMEM - FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ - FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, -#endif - /* FIX_PCIE_MCFG, */ - __end_of_fixed_addresses -}; - -extern void __set_fixmap (enum fixed_addresses idx, - phys_addr_t phys, pgprot_t flags); - -#define set_fixmap(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL) -/* - * Some hardware wants to get fixmapped without caching. - */ -#define set_fixmap_nocache(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) - -#define clear_fixmap(idx) \ - __set_fixmap(idx, 0, __pgprot(0)) - -#define __FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) -#define FIXADDR_START (FIXADDR_TOP - __FIXADDR_SIZE) - -#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) -#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) - -extern void __this_fixmap_does_not_exist(void); - -/* - * 'index to address' translation. If anyone tries to use the idx - * directly without tranlation, we catch the bug with a NULL-deference - * kernel oops. Illegal ranges of incoming indices are caught too. - */ -static __always_inline unsigned long fix_to_virt(const unsigned int idx) -{ - /* - * this branch gets completely eliminated after inlining, - * except when someone tries to use fixaddr indices in an - * illegal way. (such as mixing up address types or using - * out-of-range indices). - * - * If it doesn't get removed, the linker will complain - * loudly with a reasonably clear error message.. - */ - if (idx >= __end_of_fixed_addresses) - __this_fixmap_does_not_exist(); - - return __fix_to_virt(idx); -} - -static inline unsigned long virt_to_fix(const unsigned long vaddr) -{ - BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); - return __virt_to_fix(vaddr); -} - -#endif /* !__ASSEMBLY__ */ -#endif diff --git a/include/asm-powerpc/floppy.h b/include/asm-powerpc/floppy.h deleted file mode 100644 index 24bd34c57e9d..000000000000 --- a/include/asm-powerpc/floppy.h +++ /dev/null @@ -1,213 +0,0 @@ -/* - * Architecture specific parts of the Floppy driver - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 - */ -#ifndef __ASM_POWERPC_FLOPPY_H -#define __ASM_POWERPC_FLOPPY_H -#ifdef __KERNEL__ - -#include - -#define fd_inb(port) inb_p(port) -#define fd_outb(value,port) outb_p(value,port) - -#define fd_enable_dma() enable_dma(FLOPPY_DMA) -#define fd_disable_dma() fd_ops->_disable_dma(FLOPPY_DMA) -#define fd_free_dma() fd_ops->_free_dma(FLOPPY_DMA) -#define fd_clear_dma_ff() clear_dma_ff(FLOPPY_DMA) -#define fd_set_dma_mode(mode) set_dma_mode(FLOPPY_DMA, mode) -#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count) -#define fd_get_dma_residue() fd_ops->_get_dma_residue(FLOPPY_DMA) -#define fd_enable_irq() enable_irq(FLOPPY_IRQ) -#define fd_disable_irq() disable_irq(FLOPPY_IRQ) -#define fd_cacheflush(addr,size) /* nothing */ -#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL); - -#include -#include /* for isa_bridge_pcidev */ - -#define fd_dma_setup(addr,size,mode,io) fd_ops->_dma_setup(addr,size,mode,io) - -static int fd_request_dma(void); - -struct fd_dma_ops { - void (*_disable_dma)(unsigned int dmanr); - void (*_free_dma)(unsigned int dmanr); - int (*_get_dma_residue)(unsigned int dummy); - int (*_dma_setup)(char *addr, unsigned long size, int mode, int io); -}; - -static int virtual_dma_count; -static int virtual_dma_residue; -static char *virtual_dma_addr; -static int virtual_dma_mode; -static int doing_vdma; -static struct fd_dma_ops *fd_ops; - -static irqreturn_t floppy_hardint(int irq, void *dev_id) -{ - unsigned char st; - int lcount; - char *lptr; - - if (!doing_vdma) - return floppy_interrupt(irq, dev_id); - - - st = 1; - for (lcount=virtual_dma_count, lptr=virtual_dma_addr; - lcount; lcount--, lptr++) { - st=inb(virtual_dma_port+4) & 0xa0 ; - if (st != 0xa0) - break; - if (virtual_dma_mode) - outb_p(*lptr, virtual_dma_port+5); - else - *lptr = inb_p(virtual_dma_port+5); - } - virtual_dma_count = lcount; - virtual_dma_addr = lptr; - st = inb(virtual_dma_port+4); - - if (st == 0x20) - return IRQ_HANDLED; - if (!(st & 0x20)) { - virtual_dma_residue += virtual_dma_count; - virtual_dma_count=0; - doing_vdma = 0; - floppy_interrupt(irq, dev_id); - return IRQ_HANDLED; - } - return IRQ_HANDLED; -} - -static void vdma_disable_dma(unsigned int dummy) -{ - doing_vdma = 0; - virtual_dma_residue += virtual_dma_count; - virtual_dma_count=0; -} - -static void vdma_nop(unsigned int dummy) -{ -} - - -static int vdma_get_dma_residue(unsigned int dummy) -{ - return virtual_dma_count + virtual_dma_residue; -} - - -static int fd_request_irq(void) -{ - if (can_use_virtual_dma) - return request_irq(FLOPPY_IRQ, floppy_hardint, - IRQF_DISABLED, "floppy", NULL); - else - return request_irq(FLOPPY_IRQ, floppy_interrupt, - IRQF_DISABLED, "floppy", NULL); -} - -static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) -{ - doing_vdma = 1; - virtual_dma_port = io; - virtual_dma_mode = (mode == DMA_MODE_WRITE); - virtual_dma_addr = addr; - virtual_dma_count = size; - virtual_dma_residue = 0; - return 0; -} - -static int hard_dma_setup(char *addr, unsigned long size, int mode, int io) -{ - static unsigned long prev_size; - static dma_addr_t bus_addr = 0; - static char *prev_addr; - static int prev_dir; - int dir; - - doing_vdma = 0; - dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE; - - if (bus_addr - && (addr != prev_addr || size != prev_size || dir != prev_dir)) { - /* different from last time -- unmap prev */ - pci_unmap_single(isa_bridge_pcidev, bus_addr, prev_size, prev_dir); - bus_addr = 0; - } - - if (!bus_addr) /* need to map it */ - bus_addr = pci_map_single(isa_bridge_pcidev, addr, size, dir); - - /* remember this one as prev */ - prev_addr = addr; - prev_size = size; - prev_dir = dir; - - fd_clear_dma_ff(); - fd_cacheflush(addr, size); - fd_set_dma_mode(mode); - set_dma_addr(FLOPPY_DMA, bus_addr); - fd_set_dma_count(size); - virtual_dma_port = io; - fd_enable_dma(); - - return 0; -} - -static struct fd_dma_ops real_dma_ops = -{ - ._disable_dma = disable_dma, - ._free_dma = free_dma, - ._get_dma_residue = get_dma_residue, - ._dma_setup = hard_dma_setup -}; - -static struct fd_dma_ops virt_dma_ops = -{ - ._disable_dma = vdma_disable_dma, - ._free_dma = vdma_nop, - ._get_dma_residue = vdma_get_dma_residue, - ._dma_setup = vdma_dma_setup -}; - -static int fd_request_dma(void) -{ - if (can_use_virtual_dma & 1) { - fd_ops = &virt_dma_ops; - return 0; - } - else { - fd_ops = &real_dma_ops; - return request_dma(FLOPPY_DMA, "floppy"); - } -} - -static int FDC1 = 0x3f0; -static int FDC2 = -1; - -/* - * Again, the CMOS information not available - */ -#define FLOPPY0_TYPE 6 -#define FLOPPY1_TYPE 0 - -#define N_FDC 2 /* Don't change this! */ -#define N_DRIVE 8 - -/* - * The PowerPC has no problems with floppy DMA crossing 64k borders. - */ -#define CROSS_64KB(a,s) (0) - -#define EXTRA_FLOPPY_PARAMS - -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_FLOPPY_H */ diff --git a/include/asm-powerpc/fs_pd.h b/include/asm-powerpc/fs_pd.h deleted file mode 100644 index 9361cd5342cc..000000000000 --- a/include/asm-powerpc/fs_pd.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Platform information definitions. - * - * 2006 (c) MontaVista Software, Inc. - * Vitaly Bordug - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef FS_PD_H -#define FS_PD_H -#include -#include - -#ifdef CONFIG_CPM2 -#include - -#if defined(CONFIG_8260) -#include -#endif - -#define cpm2_map(member) (&cpm2_immr->member) -#define cpm2_map_size(member, size) (&cpm2_immr->member) -#define cpm2_unmap(addr) do {} while(0) -#endif - -#ifdef CONFIG_8xx -#include -#include - -extern immap_t __iomem *mpc8xx_immr; - -#define immr_map(member) (&mpc8xx_immr->member) -#define immr_map_size(member, size) (&mpc8xx_immr->member) -#define immr_unmap(addr) do {} while (0) -#endif - -static inline int uart_baudrate(void) -{ - return get_baudrate(); -} - -static inline int uart_clock(void) -{ - return ppc_proc_freq; -} - -#endif diff --git a/include/asm-powerpc/fsl_gtm.h b/include/asm-powerpc/fsl_gtm.h deleted file mode 100644 index 8e8c9b5032d3..000000000000 --- a/include/asm-powerpc/fsl_gtm.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Freescale General-purpose Timers Module - * - * Copyright (c) Freescale Semicondutor, Inc. 2006. - * Shlomi Gridish - * Jerry Huang - * Copyright (c) MontaVista Software, Inc. 2008. - * Anton Vorontsov - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_FSL_GTM_H -#define __ASM_FSL_GTM_H - -#include - -struct gtm; - -struct gtm_timer { - unsigned int irq; - - struct gtm *gtm; - bool requested; - u8 __iomem *gtcfr; - __be16 __iomem *gtmdr; - __be16 __iomem *gtpsr; - __be16 __iomem *gtcnr; - __be16 __iomem *gtrfr; - __be16 __iomem *gtevr; -}; - -extern struct gtm_timer *gtm_get_timer16(void); -extern struct gtm_timer *gtm_get_specific_timer16(struct gtm *gtm, - unsigned int timer); -extern void gtm_put_timer16(struct gtm_timer *tmr); -extern int gtm_set_timer16(struct gtm_timer *tmr, unsigned long usec, - bool reload); -extern int gtm_set_exact_timer16(struct gtm_timer *tmr, u16 usec, - bool reload); -extern void gtm_stop_timer16(struct gtm_timer *tmr); -extern void gtm_ack_timer16(struct gtm_timer *tmr, u16 events); - -#endif /* __ASM_FSL_GTM_H */ diff --git a/include/asm-powerpc/fsl_lbc.h b/include/asm-powerpc/fsl_lbc.h deleted file mode 100644 index 303f5484c050..000000000000 --- a/include/asm-powerpc/fsl_lbc.h +++ /dev/null @@ -1,311 +0,0 @@ -/* Freescale Local Bus Controller - * - * Copyright (c) 2006-2007 Freescale Semiconductor - * - * Authors: Nick Spence , - * Scott Wood - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_FSL_LBC_H -#define __ASM_FSL_LBC_H - -#include -#include -#include - -struct fsl_lbc_bank { - __be32 br; /**< Base Register */ -#define BR_BA 0xFFFF8000 -#define BR_BA_SHIFT 15 -#define BR_PS 0x00001800 -#define BR_PS_SHIFT 11 -#define BR_PS_8 0x00000800 /* Port Size 8 bit */ -#define BR_PS_16 0x00001000 /* Port Size 16 bit */ -#define BR_PS_32 0x00001800 /* Port Size 32 bit */ -#define BR_DECC 0x00000600 -#define BR_DECC_SHIFT 9 -#define BR_DECC_OFF 0x00000000 /* HW ECC checking and generation off */ -#define BR_DECC_CHK 0x00000200 /* HW ECC checking on, generation off */ -#define BR_DECC_CHK_GEN 0x00000400 /* HW ECC checking and generation on */ -#define BR_WP 0x00000100 -#define BR_WP_SHIFT 8 -#define BR_MSEL 0x000000E0 -#define BR_MSEL_SHIFT 5 -#define BR_MS_GPCM 0x00000000 /* GPCM */ -#define BR_MS_FCM 0x00000020 /* FCM */ -#define BR_MS_SDRAM 0x00000060 /* SDRAM */ -#define BR_MS_UPMA 0x00000080 /* UPMA */ -#define BR_MS_UPMB 0x000000A0 /* UPMB */ -#define BR_MS_UPMC 0x000000C0 /* UPMC */ -#define BR_V 0x00000001 -#define BR_V_SHIFT 0 -#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V) - - __be32 or; /**< Base Register */ -#define OR0 0x5004 -#define OR1 0x500C -#define OR2 0x5014 -#define OR3 0x501C -#define OR4 0x5024 -#define OR5 0x502C -#define OR6 0x5034 -#define OR7 0x503C - -#define OR_FCM_AM 0xFFFF8000 -#define OR_FCM_AM_SHIFT 15 -#define OR_FCM_BCTLD 0x00001000 -#define OR_FCM_BCTLD_SHIFT 12 -#define OR_FCM_PGS 0x00000400 -#define OR_FCM_PGS_SHIFT 10 -#define OR_FCM_CSCT 0x00000200 -#define OR_FCM_CSCT_SHIFT 9 -#define OR_FCM_CST 0x00000100 -#define OR_FCM_CST_SHIFT 8 -#define OR_FCM_CHT 0x00000080 -#define OR_FCM_CHT_SHIFT 7 -#define OR_FCM_SCY 0x00000070 -#define OR_FCM_SCY_SHIFT 4 -#define OR_FCM_SCY_1 0x00000010 -#define OR_FCM_SCY_2 0x00000020 -#define OR_FCM_SCY_3 0x00000030 -#define OR_FCM_SCY_4 0x00000040 -#define OR_FCM_SCY_5 0x00000050 -#define OR_FCM_SCY_6 0x00000060 -#define OR_FCM_SCY_7 0x00000070 -#define OR_FCM_RST 0x00000008 -#define OR_FCM_RST_SHIFT 3 -#define OR_FCM_TRLX 0x00000004 -#define OR_FCM_TRLX_SHIFT 2 -#define OR_FCM_EHTR 0x00000002 -#define OR_FCM_EHTR_SHIFT 1 -}; - -struct fsl_lbc_regs { - struct fsl_lbc_bank bank[8]; - u8 res0[0x28]; - __be32 mar; /**< UPM Address Register */ - u8 res1[0x4]; - __be32 mamr; /**< UPMA Mode Register */ -#define MxMR_OP_NO (0 << 28) /**< normal operation */ -#define MxMR_OP_WA (1 << 28) /**< write array */ -#define MxMR_OP_RA (2 << 28) /**< read array */ -#define MxMR_OP_RP (3 << 28) /**< run pattern */ -#define MxMR_MAD 0x3f /**< machine address */ - __be32 mbmr; /**< UPMB Mode Register */ - __be32 mcmr; /**< UPMC Mode Register */ - u8 res2[0x8]; - __be32 mrtpr; /**< Memory Refresh Timer Prescaler Register */ - __be32 mdr; /**< UPM Data Register */ - u8 res3[0x4]; - __be32 lsor; /**< Special Operation Initiation Register */ - __be32 lsdmr; /**< SDRAM Mode Register */ - u8 res4[0x8]; - __be32 lurt; /**< UPM Refresh Timer */ - __be32 lsrt; /**< SDRAM Refresh Timer */ - u8 res5[0x8]; - __be32 ltesr; /**< Transfer Error Status Register */ -#define LTESR_BM 0x80000000 -#define LTESR_FCT 0x40000000 -#define LTESR_PAR 0x20000000 -#define LTESR_WP 0x04000000 -#define LTESR_ATMW 0x00800000 -#define LTESR_ATMR 0x00400000 -#define LTESR_CS 0x00080000 -#define LTESR_CC 0x00000001 -#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC) - __be32 ltedr; /**< Transfer Error Disable Register */ - __be32 lteir; /**< Transfer Error Interrupt Register */ - __be32 lteatr; /**< Transfer Error Attributes Register */ - __be32 ltear; /**< Transfer Error Address Register */ - u8 res6[0xC]; - __be32 lbcr; /**< Configuration Register */ -#define LBCR_LDIS 0x80000000 -#define LBCR_LDIS_SHIFT 31 -#define LBCR_BCTLC 0x00C00000 -#define LBCR_BCTLC_SHIFT 22 -#define LBCR_AHD 0x00200000 -#define LBCR_LPBSE 0x00020000 -#define LBCR_LPBSE_SHIFT 17 -#define LBCR_EPAR 0x00010000 -#define LBCR_EPAR_SHIFT 16 -#define LBCR_BMT 0x0000FF00 -#define LBCR_BMT_SHIFT 8 -#define LBCR_INIT 0x00040000 - __be32 lcrr; /**< Clock Ratio Register */ -#define LCRR_DBYP 0x80000000 -#define LCRR_DBYP_SHIFT 31 -#define LCRR_BUFCMDC 0x30000000 -#define LCRR_BUFCMDC_SHIFT 28 -#define LCRR_ECL 0x03000000 -#define LCRR_ECL_SHIFT 24 -#define LCRR_EADC 0x00030000 -#define LCRR_EADC_SHIFT 16 -#define LCRR_CLKDIV 0x0000000F -#define LCRR_CLKDIV_SHIFT 0 - u8 res7[0x8]; - __be32 fmr; /**< Flash Mode Register */ -#define FMR_CWTO 0x0000F000 -#define FMR_CWTO_SHIFT 12 -#define FMR_BOOT 0x00000800 -#define FMR_ECCM 0x00000100 -#define FMR_AL 0x00000030 -#define FMR_AL_SHIFT 4 -#define FMR_OP 0x00000003 -#define FMR_OP_SHIFT 0 - __be32 fir; /**< Flash Instruction Register */ -#define FIR_OP0 0xF0000000 -#define FIR_OP0_SHIFT 28 -#define FIR_OP1 0x0F000000 -#define FIR_OP1_SHIFT 24 -#define FIR_OP2 0x00F00000 -#define FIR_OP2_SHIFT 20 -#define FIR_OP3 0x000F0000 -#define FIR_OP3_SHIFT 16 -#define FIR_OP4 0x0000F000 -#define FIR_OP4_SHIFT 12 -#define FIR_OP5 0x00000F00 -#define FIR_OP5_SHIFT 8 -#define FIR_OP6 0x000000F0 -#define FIR_OP6_SHIFT 4 -#define FIR_OP7 0x0000000F -#define FIR_OP7_SHIFT 0 -#define FIR_OP_NOP 0x0 /* No operation and end of sequence */ -#define FIR_OP_CA 0x1 /* Issue current column address */ -#define FIR_OP_PA 0x2 /* Issue current block+page address */ -#define FIR_OP_UA 0x3 /* Issue user defined address */ -#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */ -#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */ -#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */ -#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */ -#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */ -#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */ -#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */ -#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */ -#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */ -#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */ -#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */ -#define FIR_OP_RSW 0xE /* Wait then read 1 or 2 bytes */ - __be32 fcr; /**< Flash Command Register */ -#define FCR_CMD0 0xFF000000 -#define FCR_CMD0_SHIFT 24 -#define FCR_CMD1 0x00FF0000 -#define FCR_CMD1_SHIFT 16 -#define FCR_CMD2 0x0000FF00 -#define FCR_CMD2_SHIFT 8 -#define FCR_CMD3 0x000000FF -#define FCR_CMD3_SHIFT 0 - __be32 fbar; /**< Flash Block Address Register */ -#define FBAR_BLK 0x00FFFFFF - __be32 fpar; /**< Flash Page Address Register */ -#define FPAR_SP_PI 0x00007C00 -#define FPAR_SP_PI_SHIFT 10 -#define FPAR_SP_MS 0x00000200 -#define FPAR_SP_CI 0x000001FF -#define FPAR_SP_CI_SHIFT 0 -#define FPAR_LP_PI 0x0003F000 -#define FPAR_LP_PI_SHIFT 12 -#define FPAR_LP_MS 0x00000800 -#define FPAR_LP_CI 0x000007FF -#define FPAR_LP_CI_SHIFT 0 - __be32 fbcr; /**< Flash Byte Count Register */ -#define FBCR_BC 0x00000FFF - u8 res11[0x8]; - u8 res8[0xF00]; -}; - -extern struct fsl_lbc_regs __iomem *fsl_lbc_regs; -extern spinlock_t fsl_lbc_lock; - -/* - * FSL UPM routines - */ -struct fsl_upm { - __be32 __iomem *mxmr; - int width; -}; - -extern int fsl_lbc_find(phys_addr_t addr_base); -extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm); - -/** - * fsl_upm_start_pattern - start UPM patterns execution - * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find - * @pat_offset: UPM pattern offset for the command to be executed - * - * This routine programmes UPM so the next memory access that hits an UPM - * will trigger pattern execution, starting at pat_offset. - */ -static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset) -{ - clrsetbits_be32(upm->mxmr, MxMR_MAD, MxMR_OP_RP | pat_offset); -} - -/** - * fsl_upm_end_pattern - end UPM patterns execution - * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find - * - * This routine reverts UPM to normal operation mode. - */ -static inline void fsl_upm_end_pattern(struct fsl_upm *upm) -{ - clrbits32(upm->mxmr, MxMR_OP_RP); - - while (in_be32(upm->mxmr) & MxMR_OP_RP) - cpu_relax(); -} - -/** - * fsl_upm_run_pattern - actually run an UPM pattern - * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find - * @io_base: remapped pointer to where memory access should happen - * @mar: MAR register content during pattern execution - * - * This function triggers dummy write to the memory specified by the io_base, - * thus UPM pattern actually executed. Note that mar usage depends on the - * pre-programmed AMX bits in the UPM RAM. - */ -static inline int fsl_upm_run_pattern(struct fsl_upm *upm, - void __iomem *io_base, u32 mar) -{ - int ret = 0; - unsigned long flags; - - spin_lock_irqsave(&fsl_lbc_lock, flags); - - out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width)); - - switch (upm->width) { - case 8: - out_8(io_base, 0x0); - break; - case 16: - out_be16(io_base, 0x0); - break; - case 32: - out_be32(io_base, 0x0); - break; - default: - ret = -EINVAL; - break; - } - - spin_unlock_irqrestore(&fsl_lbc_lock, flags); - - return ret; -} - -#endif /* __ASM_FSL_LBC_H */ diff --git a/include/asm-powerpc/ftrace.h b/include/asm-powerpc/ftrace.h deleted file mode 100644 index de921326cca8..000000000000 --- a/include/asm-powerpc/ftrace.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _ASM_POWERPC_FTRACE -#define _ASM_POWERPC_FTRACE - -#ifdef CONFIG_FTRACE -#define MCOUNT_ADDR ((long)(_mcount)) -#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ - -#ifndef __ASSEMBLY__ -extern void _mcount(void); -#endif - -#endif - -#endif /* _ASM_POWERPC_FTRACE */ diff --git a/include/asm-powerpc/futex.h b/include/asm-powerpc/futex.h deleted file mode 100644 index 6d406c5c5de4..000000000000 --- a/include/asm-powerpc/futex.h +++ /dev/null @@ -1,117 +0,0 @@ -#ifndef _ASM_POWERPC_FUTEX_H -#define _ASM_POWERPC_FUTEX_H - -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ - __asm__ __volatile ( \ - LWSYNC_ON_SMP \ -"1: lwarx %0,0,%2\n" \ - insn \ - PPC405_ERR77(0, %2) \ -"2: stwcx. %1,0,%2\n" \ - "bne- 1b\n" \ - "li %1,0\n" \ -"3: .section .fixup,\"ax\"\n" \ -"4: li %1,%3\n" \ - "b 3b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - ".align 3\n" \ - PPC_LONG "1b,4b,2b,4b\n" \ - ".previous" \ - : "=&r" (oldval), "=&r" (ret) \ - : "b" (uaddr), "i" (-EFAULT), "1" (oparg) \ - : "cr0", "memory") - -static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) -{ - int op = (encoded_op >> 28) & 7; - int cmp = (encoded_op >> 24) & 15; - int oparg = (encoded_op << 8) >> 20; - int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; - if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) - oparg = 1 << oparg; - - if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - pagefault_disable(); - - switch (op) { - case FUTEX_OP_SET: - __futex_atomic_op("", ret, oldval, uaddr, oparg); - break; - case FUTEX_OP_ADD: - __futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg); - break; - case FUTEX_OP_OR: - __futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg); - break; - case FUTEX_OP_ANDN: - __futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg); - break; - case FUTEX_OP_XOR: - __futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg); - break; - default: - ret = -ENOSYS; - } - - pagefault_enable(); - - if (!ret) { - switch (cmp) { - case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; - case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; - case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; - case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; - case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; - case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; - default: ret = -ENOSYS; - } - } - return ret; -} - -static inline int -futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) -{ - int prev; - - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - __asm__ __volatile__ ( - LWSYNC_ON_SMP -"1: lwarx %0,0,%2 # futex_atomic_cmpxchg_inatomic\n\ - cmpw 0,%0,%3\n\ - bne- 3f\n" - PPC405_ERR77(0,%2) -"2: stwcx. %4,0,%2\n\ - bne- 1b\n" - ISYNC_ON_SMP -"3: .section .fixup,\"ax\"\n\ -4: li %0,%5\n\ - b 3b\n\ - .previous\n\ - .section __ex_table,\"a\"\n\ - .align 3\n\ - " PPC_LONG "1b,4b,2b,4b\n\ - .previous" \ - : "=&r" (prev), "+m" (*uaddr) - : "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT) - : "cc", "memory"); - - return prev; -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_FUTEX_H */ diff --git a/include/asm-powerpc/gpio.h b/include/asm-powerpc/gpio.h deleted file mode 100644 index ea04632399d8..000000000000 --- a/include/asm-powerpc/gpio.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Generic GPIO API implementation for PowerPC. - * - * Copyright (c) 2007-2008 MontaVista Software, Inc. - * - * Author: Anton Vorontsov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __ASM_POWERPC_GPIO_H -#define __ASM_POWERPC_GPIO_H - -#include -#include - -#ifdef CONFIG_GPIOLIB - -/* - * We don't (yet) implement inlined/rapid versions for on-chip gpios. - * Just call gpiolib. - */ -static inline int gpio_get_value(unsigned int gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned int gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned int gpio) -{ - return __gpio_cansleep(gpio); -} - -/* - * Not implemented, yet. - */ -static inline int gpio_to_irq(unsigned int gpio) -{ - return -ENOSYS; -} - -static inline int irq_to_gpio(unsigned int irq) -{ - return -EINVAL; -} - -#endif /* CONFIG_GPIOLIB */ - -#endif /* __ASM_POWERPC_GPIO_H */ diff --git a/include/asm-powerpc/grackle.h b/include/asm-powerpc/grackle.h deleted file mode 100644 index bd7812a519d4..000000000000 --- a/include/asm-powerpc/grackle.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_POWERPC_GRACKLE_H -#define _ASM_POWERPC_GRACKLE_H -#ifdef __KERNEL__ -/* - * Functions for setting up and using a MPC106 northbridge - */ - -#include - -extern void setup_grackle(struct pci_controller *hose); -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_GRACKLE_H */ diff --git a/include/asm-powerpc/hardirq.h b/include/asm-powerpc/hardirq.h deleted file mode 100644 index 288e14d53b7f..000000000000 --- a/include/asm-powerpc/hardirq.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _ASM_POWERPC_HARDIRQ_H -#define _ASM_POWERPC_HARDIRQ_H -#ifdef __KERNEL__ - -#include -#include - -/* The __last_jiffy_stamp field is needed to ensure that no decrementer - * interrupt is lost on SMP machines. Since on most CPUs it is in the same - * cache line as local_irq_count, it is cheap to access and is also used on UP - * for uniformity. - */ -typedef struct { - unsigned int __softirq_pending; /* set_bit is used on this */ - unsigned int __last_jiffy_stamp; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp) - -static inline void ack_bad_irq(int irq) -{ - printk(KERN_CRIT "illegal vector %d received!\n", irq); - BUG(); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_HARDIRQ_H */ diff --git a/include/asm-powerpc/heathrow.h b/include/asm-powerpc/heathrow.h deleted file mode 100644 index 93f54958a9d1..000000000000 --- a/include/asm-powerpc/heathrow.h +++ /dev/null @@ -1,67 +0,0 @@ -#ifndef _ASM_POWERPC_HEATHROW_H -#define _ASM_POWERPC_HEATHROW_H -#ifdef __KERNEL__ -/* - * heathrow.h: definitions for using the "Heathrow" I/O controller chip. - * - * Grabbed from Open Firmware definitions on a PowerBook G3 Series - * - * Copyright (C) 1997 Paul Mackerras. - */ - -/* Front light color on Yikes/B&W G3. 32 bits */ -#define HEATHROW_FRONT_LIGHT 0x32 /* (set to 0 or 0xffffffff) */ - -/* Brightness/contrast (gossamer iMac ?). 8 bits */ -#define HEATHROW_BRIGHTNESS_CNTL 0x32 -#define HEATHROW_CONTRAST_CNTL 0x33 - -/* offset from ohare base for feature control register */ -#define HEATHROW_MBCR 0x34 /* Media bay control */ -#define HEATHROW_FCR 0x38 /* Feature control */ -#define HEATHROW_AUX_CNTL_REG 0x3c /* Aux control */ - -/* - * Bits in feature control register. - * Bits postfixed with a _N are in inverse logic - */ -#define HRW_SCC_TRANS_EN_N 0x00000001 /* Also controls modem power */ -#define HRW_BAY_POWER_N 0x00000002 -#define HRW_BAY_PCI_ENABLE 0x00000004 -#define HRW_BAY_IDE_ENABLE 0x00000008 -#define HRW_BAY_FLOPPY_ENABLE 0x00000010 -#define HRW_IDE0_ENABLE 0x00000020 -#define HRW_IDE0_RESET_N 0x00000040 -#define HRW_BAY_DEV_MASK 0x0000001c -#define HRW_BAY_RESET_N 0x00000080 -#define HRW_IOBUS_ENABLE 0x00000100 /* Internal IDE ? */ -#define HRW_SCC_ENABLE 0x00000200 -#define HRW_MESH_ENABLE 0x00000400 -#define HRW_SWIM_ENABLE 0x00000800 -#define HRW_SOUND_POWER_N 0x00001000 -#define HRW_SOUND_CLK_ENABLE 0x00002000 -#define HRW_SCCA_IO 0x00004000 -#define HRW_SCCB_IO 0x00008000 -#define HRW_PORT_OR_DESK_VIA_N 0x00010000 /* This one is 0 on PowerBook */ -#define HRW_PWM_MON_ID_N 0x00020000 /* ??? (0) */ -#define HRW_HOOK_MB_CNT_N 0x00040000 /* ??? (0) */ -#define HRW_SWIM_CLONE_FLOPPY 0x00080000 /* ??? (0) */ -#define HRW_AUD_RUN22 0x00100000 /* ??? (1) */ -#define HRW_SCSI_LINK_MODE 0x00200000 /* Read ??? (1) */ -#define HRW_ARB_BYPASS 0x00400000 /* Disable internal PCI arbitrer */ -#define HRW_IDE1_RESET_N 0x00800000 /* Media bay */ -#define HRW_SLOW_SCC_PCLK 0x01000000 /* ??? (0) */ -#define HRW_RESET_SCC 0x02000000 -#define HRW_MFDC_CELL_ENABLE 0x04000000 /* ??? (0) */ -#define HRW_USE_MFDC 0x08000000 /* ??? (0) */ -#define HRW_BMAC_IO_ENABLE 0x60000000 /* two bits, not documented in OF */ -#define HRW_BMAC_RESET 0x80000000 /* not documented in OF */ - -/* We OR those features at boot on desktop G3s */ -#define HRW_DEFAULTS (HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE) - -/* Looks like Heathrow has some sort of GPIOs as well... */ -#define HRW_GPIO_MODEM_RESET 0x6d - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_HEATHROW_H */ diff --git a/include/asm-powerpc/highmem.h b/include/asm-powerpc/highmem.h deleted file mode 100644 index 5d99b6489d56..000000000000 --- a/include/asm-powerpc/highmem.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * highmem.h: virtual kernel memory mappings for high memory - * - * PowerPC version, stolen from the i386 version. - * - * Used in CONFIG_HIGHMEM systems for memory pages which - * are not addressable by direct kernel virtual addresses. - * - * Copyright (C) 1999 Gerhard Wichert, Siemens AG - * Gerhard.Wichert@pdb.siemens.de - * - * - * Redesigned the x86 32-bit VM architecture to deal with - * up to 16 Terrabyte physical memory. With current x86 CPUs - * we now support up to 64 Gigabytes physical RAM. - * - * Copyright (C) 1999 Ingo Molnar - */ - -#ifndef _ASM_HIGHMEM_H -#define _ASM_HIGHMEM_H - -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include -#include - -extern pte_t *kmap_pte; -extern pgprot_t kmap_prot; -extern pte_t *pkmap_page_table; - -/* - * Right now we initialize only a single pte table. It can be extended - * easily, subsequent pte tables have to be allocated in one physical - * chunk of RAM. - */ -#define LAST_PKMAP (1 << PTE_SHIFT) -#define LAST_PKMAP_MASK (LAST_PKMAP-1) -#define PKMAP_BASE ((FIXADDR_START - PAGE_SIZE*(LAST_PKMAP + 1)) & PMD_MASK) -#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) -#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) - -extern void *kmap_high(struct page *page); -extern void kunmap_high(struct page *page); - -static inline void *kmap(struct page *page) -{ - might_sleep(); - if (!PageHighMem(page)) - return page_address(page); - return kmap_high(page); -} - -static inline void kunmap(struct page *page) -{ - BUG_ON(in_interrupt()); - if (!PageHighMem(page)) - return; - kunmap_high(page); -} - -/* - * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap - * gives a more generic (and caching) interface. But kmap_atomic can - * be used in IRQ contexts, so in some (very limited) cases we need - * it. - */ -static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot) -{ - unsigned int idx; - unsigned long vaddr; - - /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ - pagefault_disable(); - if (!PageHighMem(page)) - return page_address(page); - - idx = type + KM_TYPE_NR*smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); -#ifdef CONFIG_DEBUG_HIGHMEM - BUG_ON(!pte_none(*(kmap_pte-idx))); -#endif - set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot)); - flush_tlb_page(NULL, vaddr); - - return (void*) vaddr; -} - -static inline void *kmap_atomic(struct page *page, enum km_type type) -{ - return kmap_atomic_prot(page, type, kmap_prot); -} - -static inline void kunmap_atomic(void *kvaddr, enum km_type type) -{ -#ifdef CONFIG_DEBUG_HIGHMEM - unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; - enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id(); - - if (vaddr < __fix_to_virt(FIX_KMAP_END)) { - pagefault_enable(); - return; - } - - BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); - - /* - * force other mappings to Oops if they'll try to access - * this pte without first remap it - */ - pte_clear(&init_mm, vaddr, kmap_pte-idx); - flush_tlb_page(NULL, vaddr); -#endif - pagefault_enable(); -} - -static inline struct page *kmap_atomic_to_page(void *ptr) -{ - unsigned long idx, vaddr = (unsigned long) ptr; - pte_t *pte; - - if (vaddr < FIXADDR_START) - return virt_to_page(ptr); - - idx = virt_to_fix(vaddr); - pte = kmap_pte - (idx - FIX_KMAP_BEGIN); - return pte_page(*pte); -} - -#define flush_cache_kmaps() flush_cache_all() - -#endif /* __KERNEL__ */ - -#endif /* _ASM_HIGHMEM_H */ diff --git a/include/asm-powerpc/hugetlb.h b/include/asm-powerpc/hugetlb.h deleted file mode 100644 index 26f0d0ab27a5..000000000000 --- a/include/asm-powerpc/hugetlb.h +++ /dev/null @@ -1,75 +0,0 @@ -#ifndef _ASM_POWERPC_HUGETLB_H -#define _ASM_POWERPC_HUGETLB_H - -#include - - -int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr, - unsigned long len); - -void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, - unsigned long end, unsigned long floor, - unsigned long ceiling); - -void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte); - -pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, - pte_t *ptep); - -/* - * If the arch doesn't supply something else, assume that hugepage - * size aligned regions are ok without further preparation. - */ -static inline int prepare_hugepage_range(struct file *file, - unsigned long addr, unsigned long len) -{ - struct hstate *h = hstate_file(file); - if (len & ~huge_page_mask(h)) - return -EINVAL; - if (addr & ~huge_page_mask(h)) - return -EINVAL; - return 0; -} - -static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) -{ -} - -static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep) -{ -} - -static inline int huge_pte_none(pte_t pte) -{ - return pte_none(pte); -} - -static inline pte_t huge_pte_wrprotect(pte_t pte) -{ - return pte_wrprotect(pte); -} - -static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep, - pte_t pte, int dirty) -{ - return ptep_set_access_flags(vma, addr, ptep, pte, dirty); -} - -static inline pte_t huge_ptep_get(pte_t *ptep) -{ - return *ptep; -} - -static inline int arch_prepare_hugepage(struct page *page) -{ - return 0; -} - -static inline void arch_release_hugepage(struct page *page) -{ -} - -#endif /* _ASM_POWERPC_HUGETLB_H */ diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h deleted file mode 100644 index fbe2932fa9e9..000000000000 --- a/include/asm-powerpc/hvcall.h +++ /dev/null @@ -1,296 +0,0 @@ -#ifndef _ASM_POWERPC_HVCALL_H -#define _ASM_POWERPC_HVCALL_H -#ifdef __KERNEL__ - -#define HVSC .long 0x44000022 - -#define H_SUCCESS 0 -#define H_BUSY 1 /* Hardware busy -- retry later */ -#define H_CLOSED 2 /* Resource closed */ -#define H_NOT_AVAILABLE 3 -#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */ -#define H_PARTIAL 5 -#define H_IN_PROGRESS 14 /* Kind of like busy */ -#define H_PAGE_REGISTERED 15 -#define H_PARTIAL_STORE 16 -#define H_PENDING 17 /* returned from H_POLL_PENDING */ -#define H_CONTINUE 18 /* Returned from H_Join on success */ -#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */ -#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \ - is a good time to retry */ -#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \ - is a good time to retry */ -#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \ - is a good time to retry */ -#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \ - is a good time to retry */ -#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \ - is a good time to retry */ -#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \ - is a good time to retry */ -#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */ -#define H_HARDWARE -1 /* Hardware error */ -#define H_FUNCTION -2 /* Function not supported */ -#define H_PRIVILEGE -3 /* Caller not privileged */ -#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */ -#define H_BAD_MODE -5 /* Illegal msr value */ -#define H_PTEG_FULL -6 /* PTEG is full */ -#define H_NOT_FOUND -7 /* PTE was not found" */ -#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ -#define H_NO_MEM -9 -#define H_AUTHORITY -10 -#define H_PERMISSION -11 -#define H_DROPPED -12 -#define H_SOURCE_PARM -13 -#define H_DEST_PARM -14 -#define H_REMOTE_PARM -15 -#define H_RESOURCE -16 -#define H_ADAPTER_PARM -17 -#define H_RH_PARM -18 -#define H_RCQ_PARM -19 -#define H_SCQ_PARM -20 -#define H_EQ_PARM -21 -#define H_RT_PARM -22 -#define H_ST_PARM -23 -#define H_SIGT_PARM -24 -#define H_TOKEN_PARM -25 -#define H_MLENGTH_PARM -27 -#define H_MEM_PARM -28 -#define H_MEM_ACCESS_PARM -29 -#define H_ATTR_PARM -30 -#define H_PORT_PARM -31 -#define H_MCG_PARM -32 -#define H_VL_PARM -33 -#define H_TSIZE_PARM -34 -#define H_TRACE_PARM -35 - -#define H_MASK_PARM -37 -#define H_MCG_FULL -38 -#define H_ALIAS_EXIST -39 -#define H_P_COUNTER -40 -#define H_TABLE_FULL -41 -#define H_ALT_TABLE -42 -#define H_MR_CONDITION -43 -#define H_NOT_ENOUGH_RESOURCES -44 -#define H_R_STATE -45 -#define H_RESCINDEND -46 - - -/* Long Busy is a condition that can be returned by the firmware - * when a call cannot be completed now, but the identical call - * should be retried later. This prevents calls blocking in the - * firmware for long periods of time. Annoyingly the firmware can return - * a range of return codes, hinting at how long we should wait before - * retrying. If you don't care for the hint, the macro below is a good - * way to check for the long_busy return codes - */ -#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \ - && (x <= H_LONG_BUSY_END_RANGE)) - -/* Flags */ -#define H_LARGE_PAGE (1UL<<(63-16)) -#define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */ -#define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */ -#define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */ -#define H_PAGE_STATE_CHANGE (1UL<<(63-28)) -#define H_PAGE_UNUSED ((1UL<<(63-29)) | (1UL<<(63-30))) -#define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED) -#define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1UL<<(63-31))) -#define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE -#define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */ -#define H_ANDCOND (1UL<<(63-33)) -#define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */ -#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */ -#define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */ -#define H_COPY_PAGE (1UL<<(63-49)) -#define H_N (1UL<<(63-61)) -#define H_PP1 (1UL<<(63-62)) -#define H_PP2 (1UL<<(63-63)) - -/* VASI States */ -#define H_VASI_INVALID 0 -#define H_VASI_ENABLED 1 -#define H_VASI_ABORTED 2 -#define H_VASI_SUSPENDING 3 -#define H_VASI_SUSPENDED 4 -#define H_VASI_RESUMED 5 -#define H_VASI_COMPLETED 6 - -/* DABRX flags */ -#define H_DABRX_HYPERVISOR (1UL<<(63-61)) -#define H_DABRX_KERNEL (1UL<<(63-62)) -#define H_DABRX_USER (1UL<<(63-63)) - -/* Each control block has to be on a 4K bondary */ -#define H_CB_ALIGNMENT 4096 - -/* pSeries hypervisor opcodes */ -#define H_REMOVE 0x04 -#define H_ENTER 0x08 -#define H_READ 0x0c -#define H_CLEAR_MOD 0x10 -#define H_CLEAR_REF 0x14 -#define H_PROTECT 0x18 -#define H_GET_TCE 0x1c -#define H_PUT_TCE 0x20 -#define H_SET_SPRG0 0x24 -#define H_SET_DABR 0x28 -#define H_PAGE_INIT 0x2c -#define H_SET_ASR 0x30 -#define H_ASR_ON 0x34 -#define H_ASR_OFF 0x38 -#define H_LOGICAL_CI_LOAD 0x3c -#define H_LOGICAL_CI_STORE 0x40 -#define H_LOGICAL_CACHE_LOAD 0x44 -#define H_LOGICAL_CACHE_STORE 0x48 -#define H_LOGICAL_ICBI 0x4c -#define H_LOGICAL_DCBF 0x50 -#define H_GET_TERM_CHAR 0x54 -#define H_PUT_TERM_CHAR 0x58 -#define H_REAL_TO_LOGICAL 0x5c -#define H_HYPERVISOR_DATA 0x60 -#define H_EOI 0x64 -#define H_CPPR 0x68 -#define H_IPI 0x6c -#define H_IPOLL 0x70 -#define H_XIRR 0x74 -#define H_PERFMON 0x7c -#define H_MIGRATE_DMA 0x78 -#define H_REGISTER_VPA 0xDC -#define H_CEDE 0xE0 -#define H_CONFER 0xE4 -#define H_PROD 0xE8 -#define H_GET_PPP 0xEC -#define H_SET_PPP 0xF0 -#define H_PURR 0xF4 -#define H_PIC 0xF8 -#define H_REG_CRQ 0xFC -#define H_FREE_CRQ 0x100 -#define H_VIO_SIGNAL 0x104 -#define H_SEND_CRQ 0x108 -#define H_COPY_RDMA 0x110 -#define H_REGISTER_LOGICAL_LAN 0x114 -#define H_FREE_LOGICAL_LAN 0x118 -#define H_ADD_LOGICAL_LAN_BUFFER 0x11C -#define H_SEND_LOGICAL_LAN 0x120 -#define H_BULK_REMOVE 0x124 -#define H_MULTICAST_CTRL 0x130 -#define H_SET_XDABR 0x134 -#define H_STUFF_TCE 0x138 -#define H_PUT_TCE_INDIRECT 0x13C -#define H_CHANGE_LOGICAL_LAN_MAC 0x14C -#define H_VTERM_PARTNER_INFO 0x150 -#define H_REGISTER_VTERM 0x154 -#define H_FREE_VTERM 0x158 -#define H_RESET_EVENTS 0x15C -#define H_ALLOC_RESOURCE 0x160 -#define H_FREE_RESOURCE 0x164 -#define H_MODIFY_QP 0x168 -#define H_QUERY_QP 0x16C -#define H_REREGISTER_PMR 0x170 -#define H_REGISTER_SMR 0x174 -#define H_QUERY_MR 0x178 -#define H_QUERY_MW 0x17C -#define H_QUERY_HCA 0x180 -#define H_QUERY_PORT 0x184 -#define H_MODIFY_PORT 0x188 -#define H_DEFINE_AQP1 0x18C -#define H_GET_TRACE_BUFFER 0x190 -#define H_DEFINE_AQP0 0x194 -#define H_RESIZE_MR 0x198 -#define H_ATTACH_MCQP 0x19C -#define H_DETACH_MCQP 0x1A0 -#define H_CREATE_RPT 0x1A4 -#define H_REMOVE_RPT 0x1A8 -#define H_REGISTER_RPAGES 0x1AC -#define H_DISABLE_AND_GETC 0x1B0 -#define H_ERROR_DATA 0x1B4 -#define H_GET_HCA_INFO 0x1B8 -#define H_GET_PERF_COUNT 0x1BC -#define H_MANAGE_TRACE 0x1C0 -#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4 -#define H_QUERY_INT_STATE 0x1E4 -#define H_POLL_PENDING 0x1D8 -#define H_ILLAN_ATTRIBUTES 0x244 -#define H_JOIN 0x298 -#define H_VASI_STATE 0x2A4 -#define H_ENABLE_CRQ 0x2B0 -#define H_SET_MPP 0x2D0 -#define H_GET_MPP 0x2D4 -#define MAX_HCALL_OPCODE H_GET_MPP - -#ifndef __ASSEMBLY__ - -/** - * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments - * @opcode: The hypervisor call to make. - * - * This call supports up to 7 arguments and only returns the status of - * the hcall. Use this version where possible, its slightly faster than - * the other plpar_hcalls. - */ -long plpar_hcall_norets(unsigned long opcode, ...); - -/** - * plpar_hcall: - Make a pseries hypervisor call - * @opcode: The hypervisor call to make. - * @retbuf: Buffer to store up to 4 return arguments in. - * - * This call supports up to 6 arguments and 4 return arguments. Use - * PLPAR_HCALL_BUFSIZE to size the return argument buffer. - * - * Used for all but the craziest of phyp interfaces (see plpar_hcall9) - */ -#define PLPAR_HCALL_BUFSIZE 4 -long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...); - -/** - * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats - * @opcode: The hypervisor call to make. - * @retbuf: Buffer to store up to 4 return arguments in. - * - * This call supports up to 6 arguments and 4 return arguments. Use - * PLPAR_HCALL_BUFSIZE to size the return argument buffer. - * - * Used when phyp interface needs to be called in real mode. Similar to - * plpar_hcall, but plpar_hcall_raw works in real mode and does not - * calculate hypervisor call statistics. - */ -long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...); - -/** - * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments - * @opcode: The hypervisor call to make. - * @retbuf: Buffer to store up to 9 return arguments in. - * - * This call supports up to 9 arguments and 9 return arguments. Use - * PLPAR_HCALL9_BUFSIZE to size the return argument buffer. - */ -#define PLPAR_HCALL9_BUFSIZE 9 -long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...); - -/* For hcall instrumentation. One structure per-hcall, per-CPU */ -struct hcall_stats { - unsigned long num_calls; /* number of calls (on this CPU) */ - unsigned long tb_total; /* total wall time (mftb) of calls. */ - unsigned long purr_total; /* total cpu time (PURR) of calls. */ -}; -#define HCALL_STAT_ARRAY_SIZE ((MAX_HCALL_OPCODE >> 2) + 1) - -struct hvcall_mpp_data { - unsigned long entitled_mem; - unsigned long mapped_mem; - unsigned short group_num; - unsigned short pool_num; - unsigned char mem_weight; - unsigned char unallocated_mem_weight; - unsigned long unallocated_entitlement; /* value in bytes */ - unsigned long pool_size; - signed long loan_request; - unsigned long backing_mem; -}; - -int h_get_mpp(struct hvcall_mpp_data *); -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_HVCALL_H */ diff --git a/include/asm-powerpc/hvconsole.h b/include/asm-powerpc/hvconsole.h deleted file mode 100644 index 35ea69e8121f..000000000000 --- a/include/asm-powerpc/hvconsole.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * hvconsole.h - * Copyright (C) 2004 Ryan S Arnold, IBM Corporation - * - * LPAR console support. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _PPC64_HVCONSOLE_H -#define _PPC64_HVCONSOLE_H -#ifdef __KERNEL__ - -/* - * PSeries firmware will only send/recv up to 16 bytes of character data per - * hcall. - */ -#define MAX_VIO_PUT_CHARS 16 -#define SIZE_VIO_GET_CHARS 16 - -/* - * Vio firmware always attempts to fetch MAX_VIO_GET_CHARS chars. The 'count' - * parm is included to conform to put_chars() function pointer template - */ -extern int hvc_get_chars(uint32_t vtermno, char *buf, int count); -extern int hvc_put_chars(uint32_t vtermno, const char *buf, int count); - -#endif /* __KERNEL__ */ -#endif /* _PPC64_HVCONSOLE_H */ diff --git a/include/asm-powerpc/hvcserver.h b/include/asm-powerpc/hvcserver.h deleted file mode 100644 index 67d7da3a4da4..000000000000 --- a/include/asm-powerpc/hvcserver.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * hvcserver.h - * Copyright (C) 2004 Ryan S Arnold, IBM Corporation - * - * PPC64 virtual I/O console server support. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _PPC64_HVCSERVER_H -#define _PPC64_HVCSERVER_H -#ifdef __KERNEL__ - -#include - -/* Converged Location Code length */ -#define HVCS_CLC_LENGTH 79 - -/** - * hvcs_partner_info - an element in a list of partner info - * @node: list_head denoting this partner_info struct's position in the list of - * partner info. - * @unit_address: The partner unit address of this entry. - * @partition_ID: The partner partition ID of this entry. - * @location_code: The converged location code of this entry + 1 char for the - * null-term. - * - * This structure outlines the format that partner info is presented to a caller - * of the hvcs partner info fetching functions. These are strung together into - * a list using linux kernel lists. - */ -struct hvcs_partner_info { - struct list_head node; - uint32_t unit_address; - uint32_t partition_ID; - char location_code[HVCS_CLC_LENGTH + 1]; /* CLC + 1 null-term char */ -}; - -extern int hvcs_free_partner_info(struct list_head *head); -extern int hvcs_get_partner_info(uint32_t unit_address, - struct list_head *head, unsigned long *pi_buff); -extern int hvcs_register_connection(uint32_t unit_address, - uint32_t p_partition_ID, uint32_t p_unit_address); -extern int hvcs_free_connection(uint32_t unit_address); - -#endif /* __KERNEL__ */ -#endif /* _PPC64_HVCSERVER_H */ diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h deleted file mode 100644 index f75a5fc64d2e..000000000000 --- a/include/asm-powerpc/hw_irq.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright (C) 1999 Cort Dougan - */ -#ifndef _ASM_POWERPC_HW_IRQ_H -#define _ASM_POWERPC_HW_IRQ_H - -#ifdef __KERNEL__ - -#include -#include -#include -#include - -extern void timer_interrupt(struct pt_regs *); - -#ifdef CONFIG_PPC64 -#include - -static inline unsigned long local_get_flags(void) -{ - unsigned long flags; - - __asm__ __volatile__("lbz %0,%1(13)" - : "=r" (flags) - : "i" (offsetof(struct paca_struct, soft_enabled))); - - return flags; -} - -static inline unsigned long raw_local_irq_disable(void) -{ - unsigned long flags, zero; - - __asm__ __volatile__("li %1,0; lbz %0,%2(13); stb %1,%2(13)" - : "=r" (flags), "=&r" (zero) - : "i" (offsetof(struct paca_struct, soft_enabled)) - : "memory"); - - return flags; -} - -extern void raw_local_irq_restore(unsigned long); -extern void iseries_handle_interrupts(void); - -#define raw_local_irq_enable() raw_local_irq_restore(1) -#define raw_local_save_flags(flags) ((flags) = local_get_flags()) -#define raw_local_irq_save(flags) ((flags) = raw_local_irq_disable()) - -#define raw_irqs_disabled() (local_get_flags() == 0) -#define raw_irqs_disabled_flags(flags) ((flags) == 0) - -#define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1) -#define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1) - -#define hard_irq_disable() \ - do { \ - __hard_irq_disable(); \ - get_paca()->soft_enabled = 0; \ - get_paca()->hard_enabled = 0; \ - } while(0) - -static inline int irqs_disabled_flags(unsigned long flags) -{ - return flags == 0; -} - -#else - -#if defined(CONFIG_BOOKE) -#define SET_MSR_EE(x) mtmsr(x) -#define local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory") -#else -#define SET_MSR_EE(x) mtmsr(x) -#define local_irq_restore(flags) mtmsr(flags) -#endif - -static inline void local_irq_disable(void) -{ -#ifdef CONFIG_BOOKE - __asm__ __volatile__("wrteei 0": : :"memory"); -#else - unsigned long msr; - __asm__ __volatile__("": : :"memory"); - msr = mfmsr(); - SET_MSR_EE(msr & ~MSR_EE); -#endif -} - -static inline void local_irq_enable(void) -{ -#ifdef CONFIG_BOOKE - __asm__ __volatile__("wrteei 1": : :"memory"); -#else - unsigned long msr; - __asm__ __volatile__("": : :"memory"); - msr = mfmsr(); - SET_MSR_EE(msr | MSR_EE); -#endif -} - -static inline void local_irq_save_ptr(unsigned long *flags) -{ - unsigned long msr; - msr = mfmsr(); - *flags = msr; -#ifdef CONFIG_BOOKE - __asm__ __volatile__("wrteei 0": : :"memory"); -#else - SET_MSR_EE(msr & ~MSR_EE); -#endif - __asm__ __volatile__("": : :"memory"); -} - -#define local_save_flags(flags) ((flags) = mfmsr()) -#define local_irq_save(flags) local_irq_save_ptr(&flags) -#define irqs_disabled() ((mfmsr() & MSR_EE) == 0) - -#define hard_irq_enable() local_irq_enable() -#define hard_irq_disable() local_irq_disable() - -static inline int irqs_disabled_flags(unsigned long flags) -{ - return (flags & MSR_EE) == 0; -} - -#endif /* CONFIG_PPC64 */ - -/* - * interrupt-retrigger: should we handle this via lost interrupts and IPIs - * or should we not care like we do now ? --BenH. - */ -struct hw_interrupt_type; - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_HW_IRQ_H */ diff --git a/include/asm-powerpc/hydra.h b/include/asm-powerpc/hydra.h deleted file mode 100644 index 1ad4eed07fbe..000000000000 --- a/include/asm-powerpc/hydra.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions - * - * Copyright (C) 1997 Geert Uytterhoeven - * - * This file is based on the following documentation: - * - * Macintosh Technology in the Common Hardware Reference Platform - * Apple Computer, Inc. - * - * © Copyright 1995 Apple Computer, Inc. All rights reserved. - * - * It's available online from http://chrp.apple.com/MacTech.pdf. - * You can obtain paper copies of this book from computer bookstores or by - * writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San - * Francisco, CA 94104. Reference ISBN 1-55860-393-X. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#ifndef _ASMPPC_HYDRA_H -#define _ASMPPC_HYDRA_H - -#ifdef __KERNEL__ - -struct Hydra { - /* DBDMA Controller Register Space */ - char Pad1[0x30]; - u_int CachePD; - u_int IDs; - u_int Feature_Control; - char Pad2[0x7fc4]; - /* DBDMA Channel Register Space */ - char SCSI_DMA[0x100]; - char Pad3[0x300]; - char SCCA_Tx_DMA[0x100]; - char SCCA_Rx_DMA[0x100]; - char SCCB_Tx_DMA[0x100]; - char SCCB_Rx_DMA[0x100]; - char Pad4[0x7800]; - /* Device Register Space */ - char SCSI[0x1000]; - char ADB[0x1000]; - char SCC_Legacy[0x1000]; - char SCC[0x1000]; - char Pad9[0x2000]; - char VIA[0x2000]; - char Pad10[0x28000]; - char OpenPIC[0x40000]; -}; - -extern volatile struct Hydra __iomem *Hydra; - - - /* - * Feature Control Register - */ - -#define HYDRA_FC_SCC_CELL_EN 0x00000001 /* Enable SCC Clock */ -#define HYDRA_FC_SCSI_CELL_EN 0x00000002 /* Enable SCSI Clock */ -#define HYDRA_FC_SCCA_ENABLE 0x00000004 /* Enable SCC A Lines */ -#define HYDRA_FC_SCCB_ENABLE 0x00000008 /* Enable SCC B Lines */ -#define HYDRA_FC_ARB_BYPASS 0x00000010 /* Bypass Internal Arbiter */ -#define HYDRA_FC_RESET_SCC 0x00000020 /* Reset SCC */ -#define HYDRA_FC_MPIC_ENABLE 0x00000040 /* Enable OpenPIC */ -#define HYDRA_FC_SLOW_SCC_PCLK 0x00000080 /* 1=15.6672, 0=25 MHz */ -#define HYDRA_FC_MPIC_IS_MASTER 0x00000100 /* OpenPIC Master Mode */ - - - /* - * OpenPIC Interrupt Sources - */ - -#define HYDRA_INT_SIO 0 -#define HYDRA_INT_SCSI_DMA 1 -#define HYDRA_INT_SCCA_TX_DMA 2 -#define HYDRA_INT_SCCA_RX_DMA 3 -#define HYDRA_INT_SCCB_TX_DMA 4 -#define HYDRA_INT_SCCB_RX_DMA 5 -#define HYDRA_INT_SCSI 6 -#define HYDRA_INT_SCCA 7 -#define HYDRA_INT_SCCB 8 -#define HYDRA_INT_VIA 9 -#define HYDRA_INT_ADB 10 -#define HYDRA_INT_ADB_NMI 11 -#define HYDRA_INT_EXT1 12 /* PCI IRQW */ -#define HYDRA_INT_EXT2 13 /* PCI IRQX */ -#define HYDRA_INT_EXT3 14 /* PCI IRQY */ -#define HYDRA_INT_EXT4 15 /* PCI IRQZ */ -#define HYDRA_INT_EXT5 16 /* IDE Primay/Secondary */ -#define HYDRA_INT_EXT6 17 /* IDE Secondary */ -#define HYDRA_INT_EXT7 18 /* Power Off Request */ -#define HYDRA_INT_SPARE 19 - -extern int hydra_init(void); -extern void macio_adb_init(void); - -#endif /* __KERNEL__ */ - -#endif /* _ASMPPC_HYDRA_H */ diff --git a/include/asm-powerpc/i8259.h b/include/asm-powerpc/i8259.h deleted file mode 100644 index db1362f8c603..000000000000 --- a/include/asm-powerpc/i8259.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _ASM_POWERPC_I8259_H -#define _ASM_POWERPC_I8259_H -#ifdef __KERNEL__ - -#include - -#ifdef CONFIG_PPC_MERGE -extern void i8259_init(struct device_node *node, unsigned long intack_addr); -extern unsigned int i8259_irq(void); -extern struct irq_host *i8259_get_host(void); -#else -extern void i8259_init(unsigned long intack_addr, int offset); -extern int i8259_irq(void); -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_I8259_H */ diff --git a/include/asm-powerpc/ibmebus.h b/include/asm-powerpc/ibmebus.h deleted file mode 100644 index 1a9d9aea21fa..000000000000 --- a/include/asm-powerpc/ibmebus.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * IBM PowerPC eBus Infrastructure Support. - * - * Copyright (c) 2005 IBM Corporation - * Joachim Fenkes - * Heiko J Schick - * - * All rights reserved. - * - * This source code is distributed under a dual license of GPL v2.0 and OpenIB - * BSD. - * - * OpenIB BSD License - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER - * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _ASM_EBUS_H -#define _ASM_EBUS_H -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -extern struct bus_type ibmebus_bus_type; - -int ibmebus_register_driver(struct of_platform_driver *drv); -void ibmebus_unregister_driver(struct of_platform_driver *drv); - -int ibmebus_request_irq(u32 ist, irq_handler_t handler, - unsigned long irq_flags, const char *devname, - void *dev_id); -void ibmebus_free_irq(u32 ist, void *dev_id); - -#endif /* __KERNEL__ */ -#endif /* _ASM_IBMEBUS_H */ diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h deleted file mode 100644 index 1aaf27be8741..000000000000 --- a/include/asm-powerpc/ide.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (C) 1994-1996 Linus Torvalds & authors - * - * This file contains the powerpc architecture specific IDE code. - */ -#ifndef _ASM_POWERPC_IDE_H -#define _ASM_POWERPC_IDE_H - -#ifdef __KERNEL__ - -#ifndef __powerpc64__ -#include -#include -#endif -#include - -#define __ide_mm_insw(p, a, c) readsw((void __iomem *)(p), (a), (c)) -#define __ide_mm_insl(p, a, c) readsl((void __iomem *)(p), (a), (c)) -#define __ide_mm_outsw(p, a, c) writesw((void __iomem *)(p), (a), (c)) -#define __ide_mm_outsl(p, a, c) writesl((void __iomem *)(p), (a), (c)) - -#ifndef __powerpc64__ -#include -#include - -/* FIXME: use ide_platform host driver */ -static __inline__ int ide_default_irq(unsigned long base) -{ -#ifdef CONFIG_PPLUS - switch (base) { - case 0x1f0: return 14; - case 0x170: return 15; - } -#endif - return 0; -} - -/* FIXME: use ide_platform host driver */ -static __inline__ unsigned long ide_default_io_base(int index) -{ -#ifdef CONFIG_PPLUS - switch (index) { - case 0: return 0x1f0; - case 1: return 0x170; - } -#endif - return 0; -} - -#ifdef CONFIG_BLK_DEV_MPC8xx_IDE -#define IDE_ARCH_ACK_INTR 1 -#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1) -#endif - -#endif /* __powerpc64__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_IDE_H */ diff --git a/include/asm-powerpc/immap_86xx.h b/include/asm-powerpc/immap_86xx.h deleted file mode 100644 index 0f165e59c326..000000000000 --- a/include/asm-powerpc/immap_86xx.h +++ /dev/null @@ -1,156 +0,0 @@ -/** - * MPC86xx Internal Memory Map - * - * Authors: Jeff Brown - * Timur Tabi - * - * Copyright 2004,2007 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This header file defines structures for various 86xx SOC devices that are - * used by multiple source files. - */ - -#ifndef __ASM_POWERPC_IMMAP_86XX_H__ -#define __ASM_POWERPC_IMMAP_86XX_H__ -#ifdef __KERNEL__ - -/* Global Utility Registers */ -struct ccsr_guts { - __be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */ - __be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */ - __be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */ - __be32 pordevsr; /* 0x.000c - POR I/O Device Status Register */ - __be32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */ - u8 res1[0x20 - 0x14]; - __be32 porcir; /* 0x.0020 - POR Configuration Information Register */ - u8 res2[0x30 - 0x24]; - __be32 gpiocr; /* 0x.0030 - GPIO Control Register */ - u8 res3[0x40 - 0x34]; - __be32 gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */ - u8 res4[0x50 - 0x44]; - __be32 gpindr; /* 0x.0050 - General-Purpose Input Data Register */ - u8 res5[0x60 - 0x54]; - __be32 pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */ - u8 res6[0x70 - 0x64]; - __be32 devdisr; /* 0x.0070 - Device Disable Control */ - __be32 devdisr2; /* 0x.0074 - Device Disable Control 2 */ - u8 res7[0x80 - 0x78]; - __be32 powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */ - u8 res8[0x90 - 0x84]; - __be32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */ - __be32 rstrscr; /* 0x.0094 - Reset Request Status and Control Register */ - u8 res9[0xA0 - 0x98]; - __be32 pvr; /* 0x.00a0 - Processor Version Register */ - __be32 svr; /* 0x.00a4 - System Version Register */ - u8 res10[0xB0 - 0xA8]; - __be32 rstcr; /* 0x.00b0 - Reset Control Register */ - u8 res11[0xC0 - 0xB4]; - __be32 elbcvselcr; /* 0x.00c0 - eLBC Voltage Select Ctrl Reg */ - u8 res12[0x800 - 0xC4]; - __be32 clkdvdr; /* 0x.0800 - Clock Divide Register */ - u8 res13[0x900 - 0x804]; - __be32 ircr; /* 0x.0900 - Infrared Control Register */ - u8 res14[0x908 - 0x904]; - __be32 dmacr; /* 0x.0908 - DMA Control Register */ - u8 res15[0x914 - 0x90C]; - __be32 elbccr; /* 0x.0914 - eLBC Control Register */ - u8 res16[0xB20 - 0x918]; - __be32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */ - __be32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */ - __be32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */ - u8 res17[0xE00 - 0xB2C]; - __be32 clkocr; /* 0x.0e00 - Clock Out Select Register */ - u8 res18[0xE10 - 0xE04]; - __be32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */ - u8 res19[0xE20 - 0xE14]; - __be32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */ - u8 res20[0xF04 - 0xE24]; - __be32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */ - __be32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */ - u8 res21[0xF40 - 0xF0C]; - __be32 srds2cr0; /* 0x.0f40 - SerDes1 Control Register 0 */ - __be32 srds2cr1; /* 0x.0f44 - SerDes1 Control Register 0 */ -} __attribute__ ((packed)); - -#define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */ -#define CCSR_GUTS_DMACR_DEV_IR 1 /* DMA controller/channel set to IR */ - -/* - * Set the DMACR register in the GUTS - * - * The DMACR register determines the source of initiated transfers for each - * channel on each DMA controller. Rather than have a bunch of repetitive - * macros for the bit patterns, we just have a function that calculates - * them. - * - * guts: Pointer to GUTS structure - * co: The DMA controller (0 or 1) - * ch: The channel on the DMA controller (0, 1, 2, or 3) - * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx) - */ -static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts, - unsigned int co, unsigned int ch, unsigned int device) -{ - unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch)); - - clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); -} - -#define CCSR_GUTS_PMUXCR_LDPSEL 0x00010000 -#define CCSR_GUTS_PMUXCR_SSI1_MASK 0x0000C000 /* Bitmask for SSI1 */ -#define CCSR_GUTS_PMUXCR_SSI1_LA 0x00000000 /* Latched address */ -#define CCSR_GUTS_PMUXCR_SSI1_HI 0x00004000 /* High impedance */ -#define CCSR_GUTS_PMUXCR_SSI1_SSI 0x00008000 /* Used for SSI1 */ -#define CCSR_GUTS_PMUXCR_SSI2_MASK 0x00003000 /* Bitmask for SSI2 */ -#define CCSR_GUTS_PMUXCR_SSI2_LA 0x00000000 /* Latched address */ -#define CCSR_GUTS_PMUXCR_SSI2_HI 0x00001000 /* High impedance */ -#define CCSR_GUTS_PMUXCR_SSI2_SSI 0x00002000 /* Used for SSI2 */ -#define CCSR_GUTS_PMUXCR_LA_22_25_LA 0x00000000 /* Latched Address */ -#define CCSR_GUTS_PMUXCR_LA_22_25_HI 0x00000400 /* High impedance */ -#define CCSR_GUTS_PMUXCR_DBGDRV 0x00000200 /* Signals not driven */ -#define CCSR_GUTS_PMUXCR_DMA2_0 0x00000008 -#define CCSR_GUTS_PMUXCR_DMA2_3 0x00000004 -#define CCSR_GUTS_PMUXCR_DMA1_0 0x00000002 -#define CCSR_GUTS_PMUXCR_DMA1_3 0x00000001 - -/* - * Set the DMA external control bits in the GUTS - * - * The DMA external control bits in the PMUXCR are only meaningful for - * channels 0 and 3. Any other channels are ignored. - * - * guts: Pointer to GUTS structure - * co: The DMA controller (0 or 1) - * ch: The channel on the DMA controller (0, 1, 2, or 3) - * value: the new value for the bit (0 or 1) - */ -static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts, - unsigned int co, unsigned int ch, unsigned int value) -{ - if ((ch == 0) || (ch == 3)) { - unsigned int shift = 2 * (co + 1) - (ch & 1) - 1; - - clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift); - } -} - -#define CCSR_GUTS_CLKDVDR_PXCKEN 0x80000000 -#define CCSR_GUTS_CLKDVDR_SSICKEN 0x20000000 -#define CCSR_GUTS_CLKDVDR_PXCKINV 0x10000000 -#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25 -#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK 0x06000000 -#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \ - (((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT) -#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT 16 -#define CCSR_GUTS_CLKDVDR_PXCLK_MASK 0x001F0000 -#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT) -#define CCSR_GUTS_CLKDVDR_SSICLK_MASK 0x000000FF -#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK) - -#endif /* __ASM_POWERPC_IMMAP_86XX_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/immap_cpm2.h b/include/asm-powerpc/immap_cpm2.h deleted file mode 100644 index 4080bab0468c..000000000000 --- a/include/asm-powerpc/immap_cpm2.h +++ /dev/null @@ -1,650 +0,0 @@ -/* - * CPM2 Internal Memory Map - * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) - * - * The Internal Memory Map for devices with CPM2 on them. This - * is the superset of all CPM2 devices (8260, 8266, 8280, 8272, - * 8560). - */ -#ifdef __KERNEL__ -#ifndef __IMMAP_CPM2__ -#define __IMMAP_CPM2__ - -#include - -/* System configuration registers. -*/ -typedef struct sys_82xx_conf { - u32 sc_siumcr; - u32 sc_sypcr; - u8 res1[6]; - u16 sc_swsr; - u8 res2[20]; - u32 sc_bcr; - u8 sc_ppc_acr; - u8 res3[3]; - u32 sc_ppc_alrh; - u32 sc_ppc_alrl; - u8 sc_lcl_acr; - u8 res4[3]; - u32 sc_lcl_alrh; - u32 sc_lcl_alrl; - u32 sc_tescr1; - u32 sc_tescr2; - u32 sc_ltescr1; - u32 sc_ltescr2; - u32 sc_pdtea; - u8 sc_pdtem; - u8 res5[3]; - u32 sc_ldtea; - u8 sc_ldtem; - u8 res6[163]; -} sysconf_82xx_cpm2_t; - -typedef struct sys_85xx_conf { - u32 sc_cear; - u16 sc_ceer; - u16 sc_cemr; - u8 res1[70]; - u32 sc_smaer; - u8 res2[4]; - u32 sc_smevr; - u32 sc_smctr; - u32 sc_lmaer; - u8 res3[4]; - u32 sc_lmevr; - u32 sc_lmctr; - u8 res4[144]; -} sysconf_85xx_cpm2_t; - -typedef union sys_conf { - sysconf_82xx_cpm2_t siu_82xx; - sysconf_85xx_cpm2_t siu_85xx; -} sysconf_cpm2_t; - - - -/* Memory controller registers. -*/ -typedef struct mem_ctlr { - u32 memc_br0; - u32 memc_or0; - u32 memc_br1; - u32 memc_or1; - u32 memc_br2; - u32 memc_or2; - u32 memc_br3; - u32 memc_or3; - u32 memc_br4; - u32 memc_or4; - u32 memc_br5; - u32 memc_or5; - u32 memc_br6; - u32 memc_or6; - u32 memc_br7; - u32 memc_or7; - u32 memc_br8; - u32 memc_or8; - u32 memc_br9; - u32 memc_or9; - u32 memc_br10; - u32 memc_or10; - u32 memc_br11; - u32 memc_or11; - u8 res1[8]; - u32 memc_mar; - u8 res2[4]; - u32 memc_mamr; - u32 memc_mbmr; - u32 memc_mcmr; - u8 res3[8]; - u16 memc_mptpr; - u8 res4[2]; - u32 memc_mdr; - u8 res5[4]; - u32 memc_psdmr; - u32 memc_lsdmr; - u8 memc_purt; - u8 res6[3]; - u8 memc_psrt; - u8 res7[3]; - u8 memc_lurt; - u8 res8[3]; - u8 memc_lsrt; - u8 res9[3]; - u32 memc_immr; - u32 memc_pcibr0; - u32 memc_pcibr1; - u8 res10[16]; - u32 memc_pcimsk0; - u32 memc_pcimsk1; - u8 res11[52]; -} memctl_cpm2_t; - -/* System Integration Timers. -*/ -typedef struct sys_int_timers { - u8 res1[32]; - u16 sit_tmcntsc; - u8 res2[2]; - u32 sit_tmcnt; - u8 res3[4]; - u32 sit_tmcntal; - u8 res4[16]; - u16 sit_piscr; - u8 res5[2]; - u32 sit_pitc; - u32 sit_pitr; - u8 res6[94]; - u8 res7[390]; -} sit_cpm2_t; - -#define PISCR_PIRQ_MASK ((u16)0xff00) -#define PISCR_PS ((u16)0x0080) -#define PISCR_PIE ((u16)0x0004) -#define PISCR_PTF ((u16)0x0002) -#define PISCR_PTE ((u16)0x0001) - -/* PCI Controller. -*/ -typedef struct pci_ctlr { - u32 pci_omisr; - u32 pci_omimr; - u8 res1[8]; - u32 pci_ifqpr; - u32 pci_ofqpr; - u8 res2[8]; - u32 pci_imr0; - u32 pci_imr1; - u32 pci_omr0; - u32 pci_omr1; - u32 pci_odr; - u8 res3[4]; - u32 pci_idr; - u8 res4[20]; - u32 pci_imisr; - u32 pci_imimr; - u8 res5[24]; - u32 pci_ifhpr; - u8 res6[4]; - u32 pci_iftpr; - u8 res7[4]; - u32 pci_iphpr; - u8 res8[4]; - u32 pci_iptpr; - u8 res9[4]; - u32 pci_ofhpr; - u8 res10[4]; - u32 pci_oftpr; - u8 res11[4]; - u32 pci_ophpr; - u8 res12[4]; - u32 pci_optpr; - u8 res13[8]; - u32 pci_mucr; - u8 res14[8]; - u32 pci_qbar; - u8 res15[12]; - u32 pci_dmamr0; - u32 pci_dmasr0; - u32 pci_dmacdar0; - u8 res16[4]; - u32 pci_dmasar0; - u8 res17[4]; - u32 pci_dmadar0; - u8 res18[4]; - u32 pci_dmabcr0; - u32 pci_dmandar0; - u8 res19[86]; - u32 pci_dmamr1; - u32 pci_dmasr1; - u32 pci_dmacdar1; - u8 res20[4]; - u32 pci_dmasar1; - u8 res21[4]; - u32 pci_dmadar1; - u8 res22[4]; - u32 pci_dmabcr1; - u32 pci_dmandar1; - u8 res23[88]; - u32 pci_dmamr2; - u32 pci_dmasr2; - u32 pci_dmacdar2; - u8 res24[4]; - u32 pci_dmasar2; - u8 res25[4]; - u32 pci_dmadar2; - u8 res26[4]; - u32 pci_dmabcr2; - u32 pci_dmandar2; - u8 res27[88]; - u32 pci_dmamr3; - u32 pci_dmasr3; - u32 pci_dmacdar3; - u8 res28[4]; - u32 pci_dmasar3; - u8 res29[4]; - u32 pci_dmadar3; - u8 res30[4]; - u32 pci_dmabcr3; - u32 pci_dmandar3; - u8 res31[344]; - u32 pci_potar0; - u8 res32[4]; - u32 pci_pobar0; - u8 res33[4]; - u32 pci_pocmr0; - u8 res34[4]; - u32 pci_potar1; - u8 res35[4]; - u32 pci_pobar1; - u8 res36[4]; - u32 pci_pocmr1; - u8 res37[4]; - u32 pci_potar2; - u8 res38[4]; - u32 pci_pobar2; - u8 res39[4]; - u32 pci_pocmr2; - u8 res40[50]; - u32 pci_ptcr; - u32 pci_gpcr; - u32 pci_gcr; - u32 pci_esr; - u32 pci_emr; - u32 pci_ecr; - u32 pci_eacr; - u8 res41[4]; - u32 pci_edcr; - u8 res42[4]; - u32 pci_eccr; - u8 res43[44]; - u32 pci_pitar1; - u8 res44[4]; - u32 pci_pibar1; - u8 res45[4]; - u32 pci_picmr1; - u8 res46[4]; - u32 pci_pitar0; - u8 res47[4]; - u32 pci_pibar0; - u8 res48[4]; - u32 pci_picmr0; - u8 res49[4]; - u32 pci_cfg_addr; - u32 pci_cfg_data; - u32 pci_int_ack; - u8 res50[756]; -} pci_cpm2_t; - -/* Interrupt Controller. -*/ -typedef struct interrupt_controller { - u16 ic_sicr; - u8 res1[2]; - u32 ic_sivec; - u32 ic_sipnrh; - u32 ic_sipnrl; - u32 ic_siprr; - u32 ic_scprrh; - u32 ic_scprrl; - u32 ic_simrh; - u32 ic_simrl; - u32 ic_siexr; - u8 res2[88]; -} intctl_cpm2_t; - -/* Clocks and Reset. -*/ -typedef struct clk_and_reset { - u32 car_sccr; - u8 res1[4]; - u32 car_scmr; - u8 res2[4]; - u32 car_rsr; - u32 car_rmr; - u8 res[104]; -} car_cpm2_t; - -/* Input/Output Port control/status registers. - * Names consistent with processor manual, although they are different - * from the original 8xx names....... - */ -typedef struct io_port { - u32 iop_pdira; - u32 iop_ppara; - u32 iop_psora; - u32 iop_podra; - u32 iop_pdata; - u8 res1[12]; - u32 iop_pdirb; - u32 iop_pparb; - u32 iop_psorb; - u32 iop_podrb; - u32 iop_pdatb; - u8 res2[12]; - u32 iop_pdirc; - u32 iop_pparc; - u32 iop_psorc; - u32 iop_podrc; - u32 iop_pdatc; - u8 res3[12]; - u32 iop_pdird; - u32 iop_ppard; - u32 iop_psord; - u32 iop_podrd; - u32 iop_pdatd; - u8 res4[12]; -} iop_cpm2_t; - -/* Communication Processor Module Timers -*/ -typedef struct cpm_timers { - u8 cpmt_tgcr1; - u8 res1[3]; - u8 cpmt_tgcr2; - u8 res2[11]; - u16 cpmt_tmr1; - u16 cpmt_tmr2; - u16 cpmt_trr1; - u16 cpmt_trr2; - u16 cpmt_tcr1; - u16 cpmt_tcr2; - u16 cpmt_tcn1; - u16 cpmt_tcn2; - u16 cpmt_tmr3; - u16 cpmt_tmr4; - u16 cpmt_trr3; - u16 cpmt_trr4; - u16 cpmt_tcr3; - u16 cpmt_tcr4; - u16 cpmt_tcn3; - u16 cpmt_tcn4; - u16 cpmt_ter1; - u16 cpmt_ter2; - u16 cpmt_ter3; - u16 cpmt_ter4; - u8 res3[584]; -} cpmtimer_cpm2_t; - -/* DMA control/status registers. -*/ -typedef struct sdma_csr { - u8 res0[24]; - u8 sdma_sdsr; - u8 res1[3]; - u8 sdma_sdmr; - u8 res2[3]; - u8 sdma_idsr1; - u8 res3[3]; - u8 sdma_idmr1; - u8 res4[3]; - u8 sdma_idsr2; - u8 res5[3]; - u8 sdma_idmr2; - u8 res6[3]; - u8 sdma_idsr3; - u8 res7[3]; - u8 sdma_idmr3; - u8 res8[3]; - u8 sdma_idsr4; - u8 res9[3]; - u8 sdma_idmr4; - u8 res10[707]; -} sdma_cpm2_t; - -/* Fast controllers -*/ -typedef struct fcc { - u32 fcc_gfmr; - u32 fcc_fpsmr; - u16 fcc_ftodr; - u8 res1[2]; - u16 fcc_fdsr; - u8 res2[2]; - u16 fcc_fcce; - u8 res3[2]; - u16 fcc_fccm; - u8 res4[2]; - u8 fcc_fccs; - u8 res5[3]; - u8 fcc_ftirr_phy[4]; -} fcc_t; - -/* Fast controllers continued - */ -typedef struct fcc_c { - u32 fcc_firper; - u32 fcc_firer; - u32 fcc_firsr_hi; - u32 fcc_firsr_lo; - u8 fcc_gfemr; - u8 res1[15]; -} fcc_c_t; - -/* TC Layer - */ -typedef struct tclayer { - u16 tc_tcmode; - u16 tc_cdsmr; - u16 tc_tcer; - u16 tc_rcc; - u16 tc_tcmr; - u16 tc_fcc; - u16 tc_ccc; - u16 tc_icc; - u16 tc_tcc; - u16 tc_ecc; - u8 res1[12]; -} tclayer_t; - - -/* I2C -*/ -typedef struct i2c { - u8 i2c_i2mod; - u8 res1[3]; - u8 i2c_i2add; - u8 res2[3]; - u8 i2c_i2brg; - u8 res3[3]; - u8 i2c_i2com; - u8 res4[3]; - u8 i2c_i2cer; - u8 res5[3]; - u8 i2c_i2cmr; - u8 res6[331]; -} i2c_cpm2_t; - -typedef struct scc { /* Serial communication channels */ - u32 scc_gsmrl; - u32 scc_gsmrh; - u16 scc_psmr; - u8 res1[2]; - u16 scc_todr; - u16 scc_dsr; - u16 scc_scce; - u8 res2[2]; - u16 scc_sccm; - u8 res3; - u8 scc_sccs; - u8 res4[8]; -} scc_t; - -typedef struct smc { /* Serial management channels */ - u8 res1[2]; - u16 smc_smcmr; - u8 res2[2]; - u8 smc_smce; - u8 res3[3]; - u8 smc_smcm; - u8 res4[5]; -} smc_t; - -/* Serial Peripheral Interface. -*/ -typedef struct spi_ctrl { - u16 spi_spmode; - u8 res1[4]; - u8 spi_spie; - u8 res2[3]; - u8 spi_spim; - u8 res3[2]; - u8 spi_spcom; - u8 res4[82]; -} spictl_cpm2_t; - -/* CPM Mux. -*/ -typedef struct cpmux { - u8 cmx_si1cr; - u8 res1; - u8 cmx_si2cr; - u8 res2; - u32 cmx_fcr; - u32 cmx_scr; - u8 cmx_smr; - u8 res3; - u16 cmx_uar; - u8 res4[16]; -} cpmux_t; - -/* SIRAM control -*/ -typedef struct siram { - u16 si_amr; - u16 si_bmr; - u16 si_cmr; - u16 si_dmr; - u8 si_gmr; - u8 res1; - u8 si_cmdr; - u8 res2; - u8 si_str; - u8 res3; - u16 si_rsr; -} siramctl_t; - -typedef struct mcc { - u16 mcc_mcce; - u8 res1[2]; - u16 mcc_mccm; - u8 res2[2]; - u8 mcc_mccf; - u8 res3[7]; -} mcc_t; - -typedef struct comm_proc { - u32 cp_cpcr; - u32 cp_rccr; - u8 res1[14]; - u16 cp_rter; - u8 res2[2]; - u16 cp_rtmr; - u16 cp_rtscr; - u8 res3[2]; - u32 cp_rtsr; - u8 res4[12]; -} cpm_cpm2_t; - -/* USB Controller. -*/ -typedef struct usb_ctlr { - u8 usb_usmod; - u8 usb_usadr; - u8 usb_uscom; - u8 res1[1]; - u16 usb_usep1; - u16 usb_usep2; - u16 usb_usep3; - u16 usb_usep4; - u8 res2[4]; - u16 usb_usber; - u8 res3[2]; - u16 usb_usbmr; - u8 usb_usbs; - u8 res4[7]; -} usb_cpm2_t; - -/* ...and the whole thing wrapped up.... -*/ - -typedef struct immap { - /* Some references are into the unique and known dpram spaces, - * others are from the generic base. - */ -#define im_dprambase im_dpram1 - u8 im_dpram1[16*1024]; - u8 res1[16*1024]; - u8 im_dpram2[4*1024]; - u8 res2[8*1024]; - u8 im_dpram3[4*1024]; - u8 res3[16*1024]; - - sysconf_cpm2_t im_siu_conf; /* SIU Configuration */ - memctl_cpm2_t im_memctl; /* Memory Controller */ - sit_cpm2_t im_sit; /* System Integration Timers */ - pci_cpm2_t im_pci; /* PCI Controller */ - intctl_cpm2_t im_intctl; /* Interrupt Controller */ - car_cpm2_t im_clkrst; /* Clocks and reset */ - iop_cpm2_t im_ioport; /* IO Port control/status */ - cpmtimer_cpm2_t im_cpmtimer; /* CPM timers */ - sdma_cpm2_t im_sdma; /* SDMA control/status */ - - fcc_t im_fcc[3]; /* Three FCCs */ - u8 res4z[32]; - fcc_c_t im_fcc_c[3]; /* Continued FCCs */ - - u8 res4[32]; - - tclayer_t im_tclayer[8]; /* Eight TCLayers */ - u16 tc_tcgsr; - u16 tc_tcger; - - /* First set of baud rate generators. - */ - u8 res[236]; - u32 im_brgc5; - u32 im_brgc6; - u32 im_brgc7; - u32 im_brgc8; - - u8 res5[608]; - - i2c_cpm2_t im_i2c; /* I2C control/status */ - cpm_cpm2_t im_cpm; /* Communication processor */ - - /* Second set of baud rate generators. - */ - u32 im_brgc1; - u32 im_brgc2; - u32 im_brgc3; - u32 im_brgc4; - - scc_t im_scc[4]; /* Four SCCs */ - smc_t im_smc[2]; /* Couple of SMCs */ - spictl_cpm2_t im_spi; /* A SPI */ - cpmux_t im_cpmux; /* CPM clock route mux */ - siramctl_t im_siramctl1; /* First SI RAM Control */ - mcc_t im_mcc1; /* First MCC */ - siramctl_t im_siramctl2; /* Second SI RAM Control */ - mcc_t im_mcc2; /* Second MCC */ - usb_cpm2_t im_usb; /* USB Controller */ - - u8 res6[1153]; - - u16 im_si1txram[256]; - u8 res7[512]; - u16 im_si1rxram[256]; - u8 res8[512]; - u16 im_si2txram[256]; - u8 res9[512]; - u16 im_si2rxram[256]; - u8 res10[512]; - u8 res11[4096]; -} cpm2_map_t; - -extern cpm2_map_t __iomem *cpm2_immr; - -#endif /* __IMMAP_CPM2__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h deleted file mode 100644 index 7b6f411db3e6..000000000000 --- a/include/asm-powerpc/immap_qe.h +++ /dev/null @@ -1,485 +0,0 @@ -/* - * include/asm-powerpc/immap_qe.h - * - * QUICC Engine (QE) Internal Memory Map. - * The Internal Memory Map for devices with QE on them. This - * is the superset of all QE devices (8360, etc.). - - * Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved. - * - * Authors: Shlomi Gridish - * Li Yang - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _ASM_POWERPC_IMMAP_QE_H -#define _ASM_POWERPC_IMMAP_QE_H -#ifdef __KERNEL__ - -#include -#include - -#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */ - -/* QE I-RAM */ -struct qe_iram { - __be32 iadd; /* I-RAM Address Register */ - __be32 idata; /* I-RAM Data Register */ - u8 res0[0x78]; -} __attribute__ ((packed)); - -/* QE Interrupt Controller */ -struct qe_ic_regs { - __be32 qicr; - __be32 qivec; - __be32 qripnr; - __be32 qipnr; - __be32 qipxcc; - __be32 qipycc; - __be32 qipwcc; - __be32 qipzcc; - __be32 qimr; - __be32 qrimr; - __be32 qicnr; - u8 res0[0x4]; - __be32 qiprta; - __be32 qiprtb; - u8 res1[0x4]; - __be32 qricr; - u8 res2[0x20]; - __be32 qhivec; - u8 res3[0x1C]; -} __attribute__ ((packed)); - -/* Communications Processor */ -struct cp_qe { - __be32 cecr; /* QE command register */ - __be32 ceccr; /* QE controller configuration register */ - __be32 cecdr; /* QE command data register */ - u8 res0[0xA]; - __be16 ceter; /* QE timer event register */ - u8 res1[0x2]; - __be16 cetmr; /* QE timers mask register */ - __be32 cetscr; /* QE time-stamp timer control register */ - __be32 cetsr1; /* QE time-stamp register 1 */ - __be32 cetsr2; /* QE time-stamp register 2 */ - u8 res2[0x8]; - __be32 cevter; /* QE virtual tasks event register */ - __be32 cevtmr; /* QE virtual tasks mask register */ - __be16 cercr; /* QE RAM control register */ - u8 res3[0x2]; - u8 res4[0x24]; - __be16 ceexe1; /* QE external request 1 event register */ - u8 res5[0x2]; - __be16 ceexm1; /* QE external request 1 mask register */ - u8 res6[0x2]; - __be16 ceexe2; /* QE external request 2 event register */ - u8 res7[0x2]; - __be16 ceexm2; /* QE external request 2 mask register */ - u8 res8[0x2]; - __be16 ceexe3; /* QE external request 3 event register */ - u8 res9[0x2]; - __be16 ceexm3; /* QE external request 3 mask register */ - u8 res10[0x2]; - __be16 ceexe4; /* QE external request 4 event register */ - u8 res11[0x2]; - __be16 ceexm4; /* QE external request 4 mask register */ - u8 res12[0x3A]; - __be32 ceurnr; /* QE microcode revision number register */ - u8 res13[0x244]; -} __attribute__ ((packed)); - -/* QE Multiplexer */ -struct qe_mux { - __be32 cmxgcr; /* CMX general clock route register */ - __be32 cmxsi1cr_l; /* CMX SI1 clock route low register */ - __be32 cmxsi1cr_h; /* CMX SI1 clock route high register */ - __be32 cmxsi1syr; /* CMX SI1 SYNC route register */ - __be32 cmxucr[4]; /* CMX UCCx clock route registers */ - __be32 cmxupcr; /* CMX UPC clock route register */ - u8 res0[0x1C]; -} __attribute__ ((packed)); - -/* QE Timers */ -struct qe_timers { - u8 gtcfr1; /* Timer 1 and Timer 2 global config register*/ - u8 res0[0x3]; - u8 gtcfr2; /* Timer 3 and timer 4 global config register*/ - u8 res1[0xB]; - __be16 gtmdr1; /* Timer 1 mode register */ - __be16 gtmdr2; /* Timer 2 mode register */ - __be16 gtrfr1; /* Timer 1 reference register */ - __be16 gtrfr2; /* Timer 2 reference register */ - __be16 gtcpr1; /* Timer 1 capture register */ - __be16 gtcpr2; /* Timer 2 capture register */ - __be16 gtcnr1; /* Timer 1 counter */ - __be16 gtcnr2; /* Timer 2 counter */ - __be16 gtmdr3; /* Timer 3 mode register */ - __be16 gtmdr4; /* Timer 4 mode register */ - __be16 gtrfr3; /* Timer 3 reference register */ - __be16 gtrfr4; /* Timer 4 reference register */ - __be16 gtcpr3; /* Timer 3 capture register */ - __be16 gtcpr4; /* Timer 4 capture register */ - __be16 gtcnr3; /* Timer 3 counter */ - __be16 gtcnr4; /* Timer 4 counter */ - __be16 gtevr1; /* Timer 1 event register */ - __be16 gtevr2; /* Timer 2 event register */ - __be16 gtevr3; /* Timer 3 event register */ - __be16 gtevr4; /* Timer 4 event register */ - __be16 gtps; /* Timer 1 prescale register */ - u8 res2[0x46]; -} __attribute__ ((packed)); - -/* BRG */ -struct qe_brg { - __be32 brgc[16]; /* BRG configuration registers */ - u8 res0[0x40]; -} __attribute__ ((packed)); - -/* SPI */ -struct spi { - u8 res0[0x20]; - __be32 spmode; /* SPI mode register */ - u8 res1[0x2]; - u8 spie; /* SPI event register */ - u8 res2[0x1]; - u8 res3[0x2]; - u8 spim; /* SPI mask register */ - u8 res4[0x1]; - u8 res5[0x1]; - u8 spcom; /* SPI command register */ - u8 res6[0x2]; - __be32 spitd; /* SPI transmit data register (cpu mode) */ - __be32 spird; /* SPI receive data register (cpu mode) */ - u8 res7[0x8]; -} __attribute__ ((packed)); - -/* SI */ -struct si1 { - __be16 siamr1; /* SI1 TDMA mode register */ - __be16 sibmr1; /* SI1 TDMB mode register */ - __be16 sicmr1; /* SI1 TDMC mode register */ - __be16 sidmr1; /* SI1 TDMD mode register */ - u8 siglmr1_h; /* SI1 global mode register high */ - u8 res0[0x1]; - u8 sicmdr1_h; /* SI1 command register high */ - u8 res2[0x1]; - u8 sistr1_h; /* SI1 status register high */ - u8 res3[0x1]; - __be16 sirsr1_h; /* SI1 RAM shadow address register high */ - u8 sitarc1; /* SI1 RAM counter Tx TDMA */ - u8 sitbrc1; /* SI1 RAM counter Tx TDMB */ - u8 sitcrc1; /* SI1 RAM counter Tx TDMC */ - u8 sitdrc1; /* SI1 RAM counter Tx TDMD */ - u8 sirarc1; /* SI1 RAM counter Rx TDMA */ - u8 sirbrc1; /* SI1 RAM counter Rx TDMB */ - u8 sircrc1; /* SI1 RAM counter Rx TDMC */ - u8 sirdrc1; /* SI1 RAM counter Rx TDMD */ - u8 res4[0x8]; - __be16 siemr1; /* SI1 TDME mode register 16 bits */ - __be16 sifmr1; /* SI1 TDMF mode register 16 bits */ - __be16 sigmr1; /* SI1 TDMG mode register 16 bits */ - __be16 sihmr1; /* SI1 TDMH mode register 16 bits */ - u8 siglmg1_l; /* SI1 global mode register low 8 bits */ - u8 res5[0x1]; - u8 sicmdr1_l; /* SI1 command register low 8 bits */ - u8 res6[0x1]; - u8 sistr1_l; /* SI1 status register low 8 bits */ - u8 res7[0x1]; - __be16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits*/ - u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */ - u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */ - u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */ - u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */ - u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */ - u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */ - u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */ - u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */ - u8 res8[0x8]; - __be32 siml1; /* SI1 multiframe limit register */ - u8 siedm1; /* SI1 extended diagnostic mode register */ - u8 res9[0xBB]; -} __attribute__ ((packed)); - -/* SI Routing Tables */ -struct sir { - u8 tx[0x400]; - u8 rx[0x400]; - u8 res0[0x800]; -} __attribute__ ((packed)); - -/* USB Controller */ -struct usb_ctlr { - u8 usb_usmod; - u8 usb_usadr; - u8 usb_uscom; - u8 res1[1]; - __be16 usb_usep1; - __be16 usb_usep2; - __be16 usb_usep3; - __be16 usb_usep4; - u8 res2[4]; - __be16 usb_usber; - u8 res3[2]; - __be16 usb_usbmr; - u8 res4[1]; - u8 usb_usbs; - __be16 usb_ussft; - u8 res5[2]; - __be16 usb_usfrn; - u8 res6[0x22]; -} __attribute__ ((packed)); - -/* MCC */ -struct mcc { - __be32 mcce; /* MCC event register */ - __be32 mccm; /* MCC mask register */ - __be32 mccf; /* MCC configuration register */ - __be32 merl; /* MCC emergency request level register */ - u8 res0[0xF0]; -} __attribute__ ((packed)); - -/* QE UCC Slow */ -struct ucc_slow { - __be32 gumr_l; /* UCCx general mode register (low) */ - __be32 gumr_h; /* UCCx general mode register (high) */ - __be16 upsmr; /* UCCx protocol-specific mode register */ - u8 res0[0x2]; - __be16 utodr; /* UCCx transmit on demand register */ - __be16 udsr; /* UCCx data synchronization register */ - __be16 ucce; /* UCCx event register */ - u8 res1[0x2]; - __be16 uccm; /* UCCx mask register */ - u8 res2[0x1]; - u8 uccs; /* UCCx status register */ - u8 res3[0x24]; - __be16 utpt; - u8 res4[0x52]; - u8 guemr; /* UCC general extended mode register */ -} __attribute__ ((packed)); - -/* QE UCC Fast */ -struct ucc_fast { - __be32 gumr; /* UCCx general mode register */ - __be32 upsmr; /* UCCx protocol-specific mode register */ - __be16 utodr; /* UCCx transmit on demand register */ - u8 res0[0x2]; - __be16 udsr; /* UCCx data synchronization register */ - u8 res1[0x2]; - __be32 ucce; /* UCCx event register */ - __be32 uccm; /* UCCx mask register */ - u8 uccs; /* UCCx status register */ - u8 res2[0x7]; - __be32 urfb; /* UCC receive FIFO base */ - __be16 urfs; /* UCC receive FIFO size */ - u8 res3[0x2]; - __be16 urfet; /* UCC receive FIFO emergency threshold */ - __be16 urfset; /* UCC receive FIFO special emergency - threshold */ - __be32 utfb; /* UCC transmit FIFO base */ - __be16 utfs; /* UCC transmit FIFO size */ - u8 res4[0x2]; - __be16 utfet; /* UCC transmit FIFO emergency threshold */ - u8 res5[0x2]; - __be16 utftt; /* UCC transmit FIFO transmit threshold */ - u8 res6[0x2]; - __be16 utpt; /* UCC transmit polling timer */ - u8 res7[0x2]; - __be32 urtry; /* UCC retry counter register */ - u8 res8[0x4C]; - u8 guemr; /* UCC general extended mode register */ -} __attribute__ ((packed)); - -struct ucc { - union { - struct ucc_slow slow; - struct ucc_fast fast; - u8 res[0x200]; /* UCC blocks are 512 bytes each */ - }; -} __attribute__ ((packed)); - -/* MultiPHY UTOPIA POS Controllers (UPC) */ -struct upc { - __be32 upgcr; /* UTOPIA/POS general configuration register */ - __be32 uplpa; /* UTOPIA/POS last PHY address */ - __be32 uphec; /* ATM HEC register */ - __be32 upuc; /* UTOPIA/POS UCC configuration */ - __be32 updc1; /* UTOPIA/POS device 1 configuration */ - __be32 updc2; /* UTOPIA/POS device 2 configuration */ - __be32 updc3; /* UTOPIA/POS device 3 configuration */ - __be32 updc4; /* UTOPIA/POS device 4 configuration */ - __be32 upstpa; /* UTOPIA/POS STPA threshold */ - u8 res0[0xC]; - __be32 updrs1_h; /* UTOPIA/POS device 1 rate select */ - __be32 updrs1_l; /* UTOPIA/POS device 1 rate select */ - __be32 updrs2_h; /* UTOPIA/POS device 2 rate select */ - __be32 updrs2_l; /* UTOPIA/POS device 2 rate select */ - __be32 updrs3_h; /* UTOPIA/POS device 3 rate select */ - __be32 updrs3_l; /* UTOPIA/POS device 3 rate select */ - __be32 updrs4_h; /* UTOPIA/POS device 4 rate select */ - __be32 updrs4_l; /* UTOPIA/POS device 4 rate select */ - __be32 updrp1; /* UTOPIA/POS device 1 receive priority low */ - __be32 updrp2; /* UTOPIA/POS device 2 receive priority low */ - __be32 updrp3; /* UTOPIA/POS device 3 receive priority low */ - __be32 updrp4; /* UTOPIA/POS device 4 receive priority low */ - __be32 upde1; /* UTOPIA/POS device 1 event */ - __be32 upde2; /* UTOPIA/POS device 2 event */ - __be32 upde3; /* UTOPIA/POS device 3 event */ - __be32 upde4; /* UTOPIA/POS device 4 event */ - __be16 uprp1; - __be16 uprp2; - __be16 uprp3; - __be16 uprp4; - u8 res1[0x8]; - __be16 uptirr1_0; /* Device 1 transmit internal rate 0 */ - __be16 uptirr1_1; /* Device 1 transmit internal rate 1 */ - __be16 uptirr1_2; /* Device 1 transmit internal rate 2 */ - __be16 uptirr1_3; /* Device 1 transmit internal rate 3 */ - __be16 uptirr2_0; /* Device 2 transmit internal rate 0 */ - __be16 uptirr2_1; /* Device 2 transmit internal rate 1 */ - __be16 uptirr2_2; /* Device 2 transmit internal rate 2 */ - __be16 uptirr2_3; /* Device 2 transmit internal rate 3 */ - __be16 uptirr3_0; /* Device 3 transmit internal rate 0 */ - __be16 uptirr3_1; /* Device 3 transmit internal rate 1 */ - __be16 uptirr3_2; /* Device 3 transmit internal rate 2 */ - __be16 uptirr3_3; /* Device 3 transmit internal rate 3 */ - __be16 uptirr4_0; /* Device 4 transmit internal rate 0 */ - __be16 uptirr4_1; /* Device 4 transmit internal rate 1 */ - __be16 uptirr4_2; /* Device 4 transmit internal rate 2 */ - __be16 uptirr4_3; /* Device 4 transmit internal rate 3 */ - __be32 uper1; /* Device 1 port enable register */ - __be32 uper2; /* Device 2 port enable register */ - __be32 uper3; /* Device 3 port enable register */ - __be32 uper4; /* Device 4 port enable register */ - u8 res2[0x150]; -} __attribute__ ((packed)); - -/* SDMA */ -struct sdma { - __be32 sdsr; /* Serial DMA status register */ - __be32 sdmr; /* Serial DMA mode register */ - __be32 sdtr1; /* SDMA system bus threshold register */ - __be32 sdtr2; /* SDMA secondary bus threshold register */ - __be32 sdhy1; /* SDMA system bus hysteresis register */ - __be32 sdhy2; /* SDMA secondary bus hysteresis register */ - __be32 sdta1; /* SDMA system bus address register */ - __be32 sdta2; /* SDMA secondary bus address register */ - __be32 sdtm1; /* SDMA system bus MSNUM register */ - __be32 sdtm2; /* SDMA secondary bus MSNUM register */ - u8 res0[0x10]; - __be32 sdaqr; /* SDMA address bus qualify register */ - __be32 sdaqmr; /* SDMA address bus qualify mask register */ - u8 res1[0x4]; - __be32 sdebcr; /* SDMA CAM entries base register */ - u8 res2[0x38]; -} __attribute__ ((packed)); - -/* Debug Space */ -struct dbg { - __be32 bpdcr; /* Breakpoint debug command register */ - __be32 bpdsr; /* Breakpoint debug status register */ - __be32 bpdmr; /* Breakpoint debug mask register */ - __be32 bprmrr0; /* Breakpoint request mode risc register 0 */ - __be32 bprmrr1; /* Breakpoint request mode risc register 1 */ - u8 res0[0x8]; - __be32 bprmtr0; /* Breakpoint request mode trb register 0 */ - __be32 bprmtr1; /* Breakpoint request mode trb register 1 */ - u8 res1[0x8]; - __be32 bprmir; /* Breakpoint request mode immediate register */ - __be32 bprmsr; /* Breakpoint request mode serial register */ - __be32 bpemr; /* Breakpoint exit mode register */ - u8 res2[0x48]; -} __attribute__ ((packed)); - -/* - * RISC Special Registers (Trap and Breakpoint). These are described in - * the QE Developer's Handbook. - */ -struct rsp { - __be32 tibcr[16]; /* Trap/instruction breakpoint control regs */ - u8 res0[64]; - __be32 ibcr0; - __be32 ibs0; - __be32 ibcnr0; - u8 res1[4]; - __be32 ibcr1; - __be32 ibs1; - __be32 ibcnr1; - __be32 npcr; - __be32 dbcr; - __be32 dbar; - __be32 dbamr; - __be32 dbsr; - __be32 dbcnr; - u8 res2[12]; - __be32 dbdr_h; - __be32 dbdr_l; - __be32 dbdmr_h; - __be32 dbdmr_l; - __be32 bsr; - __be32 bor; - __be32 bior; - u8 res3[4]; - __be32 iatr[4]; - __be32 eccr; /* Exception control configuration register */ - __be32 eicr; - u8 res4[0x100-0xf8]; -} __attribute__ ((packed)); - -struct qe_immap { - struct qe_iram iram; /* I-RAM */ - struct qe_ic_regs ic; /* Interrupt Controller */ - struct cp_qe cp; /* Communications Processor */ - struct qe_mux qmx; /* QE Multiplexer */ - struct qe_timers qet; /* QE Timers */ - struct spi spi[0x2]; /* spi */ - struct mcc mcc; /* mcc */ - struct qe_brg brg; /* brg */ - struct usb_ctlr usb; /* USB */ - struct si1 si1; /* SI */ - u8 res11[0x800]; - struct sir sir; /* SI Routing Tables */ - struct ucc ucc1; /* ucc1 */ - struct ucc ucc3; /* ucc3 */ - struct ucc ucc5; /* ucc5 */ - struct ucc ucc7; /* ucc7 */ - u8 res12[0x600]; - struct upc upc1; /* MultiPHY UTOPIA POS Ctrlr 1*/ - struct ucc ucc2; /* ucc2 */ - struct ucc ucc4; /* ucc4 */ - struct ucc ucc6; /* ucc6 */ - struct ucc ucc8; /* ucc8 */ - u8 res13[0x600]; - struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/ - struct sdma sdma; /* SDMA */ - struct dbg dbg; /* 0x104080 - 0x1040FF - Debug Space */ - struct rsp rsp[0x2]; /* 0x104100 - 0x1042FF - RISC Special Registers - (Trap and Breakpoint) */ - u8 res14[0x300]; /* 0x104300 - 0x1045FF */ - u8 res15[0x3A00]; /* 0x104600 - 0x107FFF */ - u8 res16[0x8000]; /* 0x108000 - 0x110000 */ - u8 muram[0xC000]; /* 0x110000 - 0x11C000 - Multi-user RAM */ - u8 res17[0x24000]; /* 0x11C000 - 0x140000 */ - u8 res18[0xC0000]; /* 0x140000 - 0x200000 */ -} __attribute__ ((packed)); - -extern struct qe_immap __iomem *qe_immr; -extern phys_addr_t get_qe_base(void); - -static inline unsigned long immrbar_virt_to_phys(void *address) -{ - if ( ((u32)address >= (u32)qe_immr) && - ((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) ) - return (unsigned long)(address - (u32)qe_immr + - (u32)get_qe_base()); - return (unsigned long)virt_to_phys(address); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_IMMAP_QE_H */ diff --git a/include/asm-powerpc/io-defs.h b/include/asm-powerpc/io-defs.h deleted file mode 100644 index 44d7927aec69..000000000000 --- a/include/asm-powerpc/io-defs.h +++ /dev/null @@ -1,60 +0,0 @@ -/* This file is meant to be include multiple times by other headers */ -/* last 2 argments are used by platforms/cell/io-workarounds.[ch] */ - -DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr), mem, addr) -DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr), mem, addr) -DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr), mem, addr) -DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr), mem, addr) -DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr), mem, addr) -DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr), mem, addr) -DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr) -DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr) -DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr) -DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr) - -#ifdef __powerpc64__ -DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr), mem, addr) -DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr), mem, addr) -DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr) -DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr) -#endif /* __powerpc64__ */ - -DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port) -DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port), pio, port) -DEF_PCI_AC_RET(inl, u32, (unsigned long port), (port), pio, port) -DEF_PCI_AC_NORET(outb, (u8 val, unsigned long port), (val, port), pio, port) -DEF_PCI_AC_NORET(outw, (u16 val, unsigned long port), (val, port), pio, port) -DEF_PCI_AC_NORET(outl, (u32 val, unsigned long port), (val, port), pio, port) - -DEF_PCI_AC_NORET(readsb, (const PCI_IO_ADDR a, void *b, unsigned long c), - (a, b, c), mem, a) -DEF_PCI_AC_NORET(readsw, (const PCI_IO_ADDR a, void *b, unsigned long c), - (a, b, c), mem, a) -DEF_PCI_AC_NORET(readsl, (const PCI_IO_ADDR a, void *b, unsigned long c), - (a, b, c), mem, a) -DEF_PCI_AC_NORET(writesb, (PCI_IO_ADDR a, const void *b, unsigned long c), - (a, b, c), mem, a) -DEF_PCI_AC_NORET(writesw, (PCI_IO_ADDR a, const void *b, unsigned long c), - (a, b, c), mem, a) -DEF_PCI_AC_NORET(writesl, (PCI_IO_ADDR a, const void *b, unsigned long c), - (a, b, c), mem, a) - -DEF_PCI_AC_NORET(insb, (unsigned long p, void *b, unsigned long c), - (p, b, c), pio, p) -DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c), - (p, b, c), pio, p) -DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c), - (p, b, c), pio, p) -DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c), - (p, b, c), pio, p) -DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c), - (p, b, c), pio, p) -DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c), - (p, b, c), pio, p) - -DEF_PCI_AC_NORET(memset_io, (PCI_IO_ADDR a, int c, unsigned long n), - (a, c, n), mem, a) -DEF_PCI_AC_NORET(memcpy_fromio, (void *d, const PCI_IO_ADDR s, unsigned long n), - (d, s, n), mem, s) -DEF_PCI_AC_NORET(memcpy_toio, (PCI_IO_ADDR d, const void *s, unsigned long n), - (d, s, n), mem, d) diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h deleted file mode 100644 index 77c7fa025e65..000000000000 --- a/include/asm-powerpc/io.h +++ /dev/null @@ -1,787 +0,0 @@ -#ifndef _ASM_POWERPC_IO_H -#define _ASM_POWERPC_IO_H -#ifdef __KERNEL__ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* Check of existence of legacy devices */ -extern int check_legacy_ioport(unsigned long base_port); -#define I8042_DATA_REG 0x60 -#define FDC_BASE 0x3f0 -/* only relevant for PReP */ -#define _PIDXR 0x279 -#define _PNPWRP 0xa79 -#define PNPBIOS_BASE 0xf000 - -#include -#include - -#include -#include -#include -#include -#include -#include - -#include - -#ifdef CONFIG_PPC64 -#include -#endif - -#define SIO_CONFIG_RA 0x398 -#define SIO_CONFIG_RD 0x399 - -#define SLOW_DOWN_IO - -/* 32 bits uses slightly different variables for the various IO - * bases. Most of this file only uses _IO_BASE though which we - * define properly based on the platform - */ -#ifndef CONFIG_PCI -#define _IO_BASE 0 -#define _ISA_MEM_BASE 0 -#define PCI_DRAM_OFFSET 0 -#elif defined(CONFIG_PPC32) -#define _IO_BASE isa_io_base -#define _ISA_MEM_BASE isa_mem_base -#define PCI_DRAM_OFFSET pci_dram_offset -#else -#define _IO_BASE pci_io_base -#define _ISA_MEM_BASE isa_mem_base -#define PCI_DRAM_OFFSET 0 -#endif - -extern unsigned long isa_io_base; -extern unsigned long pci_io_base; -extern unsigned long pci_dram_offset; - -extern resource_size_t isa_mem_base; - -#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO) -#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits -#endif - -/* - * - * Low level MMIO accessors - * - * This provides the non-bus specific accessors to MMIO. Those are PowerPC - * specific and thus shouldn't be used in generic code. The accessors - * provided here are: - * - * in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64 - * out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64 - * _insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns - * - * Those operate directly on a kernel virtual address. Note that the prototype - * for the out_* accessors has the arguments in opposite order from the usual - * linux PCI accessors. Unlike those, they take the address first and the value - * next. - * - * Note: I might drop the _ns suffix on the stream operations soon as it is - * simply normal for stream operations to not swap in the first place. - * - */ - -#ifdef CONFIG_PPC64 -#define IO_SET_SYNC_FLAG() do { local_paca->io_sync = 1; } while(0) -#else -#define IO_SET_SYNC_FLAG() -#endif - -/* gcc 4.0 and older doesn't have 'Z' constraint */ -#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0) -#define DEF_MMIO_IN_LE(name, size, insn) \ -static inline u##size name(const volatile u##size __iomem *addr) \ -{ \ - u##size ret; \ - __asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync" \ - : "=r" (ret) : "r" (addr), "m" (*addr) : "memory"); \ - return ret; \ -} - -#define DEF_MMIO_OUT_LE(name, size, insn) \ -static inline void name(volatile u##size __iomem *addr, u##size val) \ -{ \ - __asm__ __volatile__("sync;"#insn" %1,0,%2" \ - : "=m" (*addr) : "r" (val), "r" (addr) : "memory"); \ - IO_SET_SYNC_FLAG(); \ -} -#else /* newer gcc */ -#define DEF_MMIO_IN_LE(name, size, insn) \ -static inline u##size name(const volatile u##size __iomem *addr) \ -{ \ - u##size ret; \ - __asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync" \ - : "=r" (ret) : "Z" (*addr) : "memory"); \ - return ret; \ -} - -#define DEF_MMIO_OUT_LE(name, size, insn) \ -static inline void name(volatile u##size __iomem *addr, u##size val) \ -{ \ - __asm__ __volatile__("sync;"#insn" %1,%y0" \ - : "=Z" (*addr) : "r" (val) : "memory"); \ - IO_SET_SYNC_FLAG(); \ -} -#endif - -#define DEF_MMIO_IN_BE(name, size, insn) \ -static inline u##size name(const volatile u##size __iomem *addr) \ -{ \ - u##size ret; \ - __asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\ - : "=r" (ret) : "m" (*addr) : "memory"); \ - return ret; \ -} - -#define DEF_MMIO_OUT_BE(name, size, insn) \ -static inline void name(volatile u##size __iomem *addr, u##size val) \ -{ \ - __asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0" \ - : "=m" (*addr) : "r" (val) : "memory"); \ - IO_SET_SYNC_FLAG(); \ -} - - -DEF_MMIO_IN_BE(in_8, 8, lbz); -DEF_MMIO_IN_BE(in_be16, 16, lhz); -DEF_MMIO_IN_BE(in_be32, 32, lwz); -DEF_MMIO_IN_LE(in_le16, 16, lhbrx); -DEF_MMIO_IN_LE(in_le32, 32, lwbrx); - -DEF_MMIO_OUT_BE(out_8, 8, stb); -DEF_MMIO_OUT_BE(out_be16, 16, sth); -DEF_MMIO_OUT_BE(out_be32, 32, stw); -DEF_MMIO_OUT_LE(out_le16, 16, sthbrx); -DEF_MMIO_OUT_LE(out_le32, 32, stwbrx); - -#ifdef __powerpc64__ -DEF_MMIO_OUT_BE(out_be64, 64, std); -DEF_MMIO_IN_BE(in_be64, 64, ld); - -/* There is no asm instructions for 64 bits reverse loads and stores */ -static inline u64 in_le64(const volatile u64 __iomem *addr) -{ - return swab64(in_be64(addr)); -} - -static inline void out_le64(volatile u64 __iomem *addr, u64 val) -{ - out_be64(addr, swab64(val)); -} -#endif /* __powerpc64__ */ - -/* - * Low level IO stream instructions are defined out of line for now - */ -extern void _insb(const volatile u8 __iomem *addr, void *buf, long count); -extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count); -extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count); -extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count); -extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count); -extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count); - -/* The _ns naming is historical and will be removed. For now, just #define - * the non _ns equivalent names - */ -#define _insw _insw_ns -#define _insl _insl_ns -#define _outsw _outsw_ns -#define _outsl _outsl_ns - - -/* - * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line - */ - -extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n); -extern void _memcpy_fromio(void *dest, const volatile void __iomem *src, - unsigned long n); -extern void _memcpy_toio(volatile void __iomem *dest, const void *src, - unsigned long n); - -/* - * - * PCI and standard ISA accessors - * - * Those are globally defined linux accessors for devices on PCI or ISA - * busses. They follow the Linux defined semantics. The current implementation - * for PowerPC is as close as possible to the x86 version of these, and thus - * provides fairly heavy weight barriers for the non-raw versions - * - * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO - * allowing the platform to provide its own implementation of some or all - * of the accessors. - */ - -/* - * Include the EEH definitions when EEH is enabled only so they don't get - * in the way when building for 32 bits - */ -#ifdef CONFIG_EEH -#include -#endif - -/* Shortcut to the MMIO argument pointer */ -#define PCI_IO_ADDR volatile void __iomem * - -/* Indirect IO address tokens: - * - * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks - * on all IOs. (Note that this is all 64 bits only for now) - * - * To help platforms who may need to differenciate MMIO addresses in - * their hooks, a bitfield is reserved for use by the platform near the - * top of MMIO addresses (not PIO, those have to cope the hard way). - * - * This bit field is 12 bits and is at the top of the IO virtual - * addresses PCI_IO_INDIRECT_TOKEN_MASK. - * - * The kernel virtual space is thus: - * - * 0xD000000000000000 : vmalloc - * 0xD000080000000000 : PCI PHB IO space - * 0xD000080080000000 : ioremap - * 0xD0000fffffffffff : end of ioremap region - * - * Since the top 4 bits are reserved as the region ID, we use thus - * the next 12 bits and keep 4 bits available for the future if the - * virtual address space is ever to be extended. - * - * The direct IO mapping operations will then mask off those bits - * before doing the actual access, though that only happen when - * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that - * mechanism - */ - -#ifdef CONFIG_PPC_INDIRECT_IO -#define PCI_IO_IND_TOKEN_MASK 0x0fff000000000000ul -#define PCI_IO_IND_TOKEN_SHIFT 48 -#define PCI_FIX_ADDR(addr) \ - ((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK)) -#define PCI_GET_ADDR_TOKEN(addr) \ - (((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> \ - PCI_IO_IND_TOKEN_SHIFT) -#define PCI_SET_ADDR_TOKEN(addr, token) \ -do { \ - unsigned long __a = (unsigned long)(addr); \ - __a &= ~PCI_IO_IND_TOKEN_MASK; \ - __a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT; \ - (addr) = (void __iomem *)__a; \ -} while(0) -#else -#define PCI_FIX_ADDR(addr) (addr) -#endif - - -/* - * Non ordered and non-swapping "raw" accessors - */ - -static inline unsigned char __raw_readb(const volatile void __iomem *addr) -{ - return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr); -} -static inline unsigned short __raw_readw(const volatile void __iomem *addr) -{ - return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr); -} -static inline unsigned int __raw_readl(const volatile void __iomem *addr) -{ - return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr); -} -static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) -{ - *(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v; -} -static inline void __raw_writew(unsigned short v, volatile void __iomem *addr) -{ - *(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v; -} -static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) -{ - *(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v; -} - -#ifdef __powerpc64__ -static inline unsigned long __raw_readq(const volatile void __iomem *addr) -{ - return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr); -} -static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) -{ - *(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v; -} -#endif /* __powerpc64__ */ - -/* - * - * PCI PIO and MMIO accessors. - * - * - * On 32 bits, PIO operations have a recovery mechanism in case they trigger - * machine checks (which they occasionally do when probing non existing - * IO ports on some platforms, like PowerMac and 8xx). - * I always found it to be of dubious reliability and I am tempted to get - * rid of it one of these days. So if you think it's important to keep it, - * please voice up asap. We never had it for 64 bits and I do not intend - * to port it over - */ - -#ifdef CONFIG_PPC32 - -#define __do_in_asm(name, op) \ -static inline unsigned int name(unsigned int port) \ -{ \ - unsigned int x; \ - __asm__ __volatile__( \ - "sync\n" \ - "0:" op " %0,0,%1\n" \ - "1: twi 0,%0,0\n" \ - "2: isync\n" \ - "3: nop\n" \ - "4:\n" \ - ".section .fixup,\"ax\"\n" \ - "5: li %0,-1\n" \ - " b 4b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 0b,5b\n" \ - " .long 1b,5b\n" \ - " .long 2b,5b\n" \ - " .long 3b,5b\n" \ - ".previous" \ - : "=&r" (x) \ - : "r" (port + _IO_BASE) \ - : "memory"); \ - return x; \ -} - -#define __do_out_asm(name, op) \ -static inline void name(unsigned int val, unsigned int port) \ -{ \ - __asm__ __volatile__( \ - "sync\n" \ - "0:" op " %0,0,%1\n" \ - "1: sync\n" \ - "2:\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 0b,2b\n" \ - " .long 1b,2b\n" \ - ".previous" \ - : : "r" (val), "r" (port + _IO_BASE) \ - : "memory"); \ -} - -__do_in_asm(_rec_inb, "lbzx") -__do_in_asm(_rec_inw, "lhbrx") -__do_in_asm(_rec_inl, "lwbrx") -__do_out_asm(_rec_outb, "stbx") -__do_out_asm(_rec_outw, "sthbrx") -__do_out_asm(_rec_outl, "stwbrx") - -#endif /* CONFIG_PPC32 */ - -/* The "__do_*" operations below provide the actual "base" implementation - * for each of the defined acccessor. Some of them use the out_* functions - * directly, some of them still use EEH, though we might change that in the - * future. Those macros below provide the necessary argument swapping and - * handling of the IO base for PIO. - * - * They are themselves used by the macros that define the actual accessors - * and can be used by the hooks if any. - * - * Note that PIO operations are always defined in terms of their corresonding - * MMIO operations. That allows platforms like iSeries who want to modify the - * behaviour of both to only hook on the MMIO version and get both. It's also - * possible to hook directly at the toplevel PIO operation if they have to - * be handled differently - */ -#define __do_writeb(val, addr) out_8(PCI_FIX_ADDR(addr), val) -#define __do_writew(val, addr) out_le16(PCI_FIX_ADDR(addr), val) -#define __do_writel(val, addr) out_le32(PCI_FIX_ADDR(addr), val) -#define __do_writeq(val, addr) out_le64(PCI_FIX_ADDR(addr), val) -#define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val) -#define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val) -#define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val) - -#ifdef CONFIG_EEH -#define __do_readb(addr) eeh_readb(PCI_FIX_ADDR(addr)) -#define __do_readw(addr) eeh_readw(PCI_FIX_ADDR(addr)) -#define __do_readl(addr) eeh_readl(PCI_FIX_ADDR(addr)) -#define __do_readq(addr) eeh_readq(PCI_FIX_ADDR(addr)) -#define __do_readw_be(addr) eeh_readw_be(PCI_FIX_ADDR(addr)) -#define __do_readl_be(addr) eeh_readl_be(PCI_FIX_ADDR(addr)) -#define __do_readq_be(addr) eeh_readq_be(PCI_FIX_ADDR(addr)) -#else /* CONFIG_EEH */ -#define __do_readb(addr) in_8(PCI_FIX_ADDR(addr)) -#define __do_readw(addr) in_le16(PCI_FIX_ADDR(addr)) -#define __do_readl(addr) in_le32(PCI_FIX_ADDR(addr)) -#define __do_readq(addr) in_le64(PCI_FIX_ADDR(addr)) -#define __do_readw_be(addr) in_be16(PCI_FIX_ADDR(addr)) -#define __do_readl_be(addr) in_be32(PCI_FIX_ADDR(addr)) -#define __do_readq_be(addr) in_be64(PCI_FIX_ADDR(addr)) -#endif /* !defined(CONFIG_EEH) */ - -#ifdef CONFIG_PPC32 -#define __do_outb(val, port) _rec_outb(val, port) -#define __do_outw(val, port) _rec_outw(val, port) -#define __do_outl(val, port) _rec_outl(val, port) -#define __do_inb(port) _rec_inb(port) -#define __do_inw(port) _rec_inw(port) -#define __do_inl(port) _rec_inl(port) -#else /* CONFIG_PPC32 */ -#define __do_outb(val, port) writeb(val,(PCI_IO_ADDR)_IO_BASE+port); -#define __do_outw(val, port) writew(val,(PCI_IO_ADDR)_IO_BASE+port); -#define __do_outl(val, port) writel(val,(PCI_IO_ADDR)_IO_BASE+port); -#define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port); -#define __do_inw(port) readw((PCI_IO_ADDR)_IO_BASE + port); -#define __do_inl(port) readl((PCI_IO_ADDR)_IO_BASE + port); -#endif /* !CONFIG_PPC32 */ - -#ifdef CONFIG_EEH -#define __do_readsb(a, b, n) eeh_readsb(PCI_FIX_ADDR(a), (b), (n)) -#define __do_readsw(a, b, n) eeh_readsw(PCI_FIX_ADDR(a), (b), (n)) -#define __do_readsl(a, b, n) eeh_readsl(PCI_FIX_ADDR(a), (b), (n)) -#else /* CONFIG_EEH */ -#define __do_readsb(a, b, n) _insb(PCI_FIX_ADDR(a), (b), (n)) -#define __do_readsw(a, b, n) _insw(PCI_FIX_ADDR(a), (b), (n)) -#define __do_readsl(a, b, n) _insl(PCI_FIX_ADDR(a), (b), (n)) -#endif /* !CONFIG_EEH */ -#define __do_writesb(a, b, n) _outsb(PCI_FIX_ADDR(a),(b),(n)) -#define __do_writesw(a, b, n) _outsw(PCI_FIX_ADDR(a),(b),(n)) -#define __do_writesl(a, b, n) _outsl(PCI_FIX_ADDR(a),(b),(n)) - -#define __do_insb(p, b, n) readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) -#define __do_insw(p, b, n) readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) -#define __do_insl(p, b, n) readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) -#define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) -#define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) -#define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) - -#define __do_memset_io(addr, c, n) \ - _memset_io(PCI_FIX_ADDR(addr), c, n) -#define __do_memcpy_toio(dst, src, n) \ - _memcpy_toio(PCI_FIX_ADDR(dst), src, n) - -#ifdef CONFIG_EEH -#define __do_memcpy_fromio(dst, src, n) \ - eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n) -#else /* CONFIG_EEH */ -#define __do_memcpy_fromio(dst, src, n) \ - _memcpy_fromio(dst,PCI_FIX_ADDR(src),n) -#endif /* !CONFIG_EEH */ - -#ifdef CONFIG_PPC_INDIRECT_IO -#define DEF_PCI_HOOK(x) x -#else -#define DEF_PCI_HOOK(x) NULL -#endif - -/* Structure containing all the hooks */ -extern struct ppc_pci_io { - -#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) ret (*name) at; -#define DEF_PCI_AC_NORET(name, at, al, space, aa) void (*name) at; - -#include - -#undef DEF_PCI_AC_RET -#undef DEF_PCI_AC_NORET - -} ppc_pci_io; - -/* The inline wrappers */ -#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \ -static inline ret name at \ -{ \ - if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \ - return ppc_pci_io.name al; \ - return __do_##name al; \ -} - -#define DEF_PCI_AC_NORET(name, at, al, space, aa) \ -static inline void name at \ -{ \ - if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \ - ppc_pci_io.name al; \ - else \ - __do_##name al; \ -} - -#include - -#undef DEF_PCI_AC_RET -#undef DEF_PCI_AC_NORET - -/* Some drivers check for the presence of readq & writeq with - * a #ifdef, so we make them happy here. - */ -#ifdef __powerpc64__ -#define readq readq -#define writeq writeq -#endif - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -/* - * We don't do relaxed operations yet, at least not with this semantic - */ -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) -#define readq_relaxed(addr) readq(addr) - -#ifdef CONFIG_PPC32 -#define mmiowb() -#else -/* - * Enforce synchronisation of stores vs. spin_unlock - * (this does it explicitly, though our implementation of spin_unlock - * does it implicitely too) - */ -static inline void mmiowb(void) -{ - unsigned long tmp; - - __asm__ __volatile__("sync; li %0,0; stb %0,%1(13)" - : "=&r" (tmp) : "i" (offsetof(struct paca_struct, io_sync)) - : "memory"); -} -#endif /* !CONFIG_PPC32 */ - -static inline void iosync(void) -{ - __asm__ __volatile__ ("sync" : : : "memory"); -} - -/* Enforce in-order execution of data I/O. - * No distinction between read/write on PPC; use eieio for all three. - * Those are fairly week though. They don't provide a barrier between - * MMIO and cacheable storage nor do they provide a barrier vs. locks, - * they only provide barriers between 2 __raw MMIO operations and - * possibly break write combining. - */ -#define iobarrier_rw() eieio() -#define iobarrier_r() eieio() -#define iobarrier_w() eieio() - - -/* - * output pause versions need a delay at least for the - * w83c105 ide controller in a p610. - */ -#define inb_p(port) inb(port) -#define outb_p(val, port) (udelay(1), outb((val), (port))) -#define inw_p(port) inw(port) -#define outw_p(val, port) (udelay(1), outw((val), (port))) -#define inl_p(port) inl(port) -#define outl_p(val, port) (udelay(1), outl((val), (port))) - - -#define IO_SPACE_LIMIT ~(0UL) - - -/** - * ioremap - map bus memory into CPU space - * @address: bus address of the memory - * @size: size of the resource to map - * - * ioremap performs a platform specific sequence of operations to - * make bus memory CPU accessible via the readb/readw/readl/writeb/ - * writew/writel functions and the other mmio helpers. The returned - * address is not guaranteed to be usable directly as a virtual - * address. - * - * We provide a few variations of it: - * - * * ioremap is the standard one and provides non-cacheable guarded mappings - * and can be hooked by the platform via ppc_md - * - * * ioremap_flags allows to specify the page flags as an argument and can - * also be hooked by the platform via ppc_md. ioremap_prot is the exact - * same thing as ioremap_flags. - * - * * ioremap_nocache is identical to ioremap - * - * * iounmap undoes such a mapping and can be hooked - * - * * __ioremap_at (and the pending __iounmap_at) are low level functions to - * create hand-made mappings for use only by the PCI code and cannot - * currently be hooked. Must be page aligned. - * - * * __ioremap is the low level implementation used by ioremap and - * ioremap_flags and cannot be hooked (but can be used by a hook on one - * of the previous ones) - * - * * __iounmap, is the low level implementation used by iounmap and cannot - * be hooked (but can be used by a hook on iounmap) - * - */ -extern void __iomem *ioremap(phys_addr_t address, unsigned long size); -extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size, - unsigned long flags); -#define ioremap_nocache(addr, size) ioremap((addr), (size)) -#define ioremap_prot(addr, size, prot) ioremap_flags((addr), (size), (prot)) - -extern void iounmap(volatile void __iomem *addr); - -extern void __iomem *__ioremap(phys_addr_t, unsigned long size, - unsigned long flags); -extern void __iounmap(volatile void __iomem *addr); - -extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea, - unsigned long size, unsigned long flags); -extern void __iounmap_at(void *ea, unsigned long size); - -/* - * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation - * which needs some additional definitions here. They basically allow PIO - * space overall to be 1GB. This will work as long as we never try to use - * iomap to map MMIO below 1GB which should be fine on ppc64 - */ -#define HAVE_ARCH_PIO_SIZE 1 -#define PIO_OFFSET 0x00000000UL -#define PIO_MASK (FULL_IO_SIZE - 1) -#define PIO_RESERVED (FULL_IO_SIZE) - -#define mmio_read16be(addr) readw_be(addr) -#define mmio_read32be(addr) readl_be(addr) -#define mmio_write16be(val, addr) writew_be(val, addr) -#define mmio_write32be(val, addr) writel_be(val, addr) -#define mmio_insb(addr, dst, count) readsb(addr, dst, count) -#define mmio_insw(addr, dst, count) readsw(addr, dst, count) -#define mmio_insl(addr, dst, count) readsl(addr, dst, count) -#define mmio_outsb(addr, src, count) writesb(addr, src, count) -#define mmio_outsw(addr, src, count) writesw(addr, src, count) -#define mmio_outsl(addr, src, count) writesl(addr, src, count) - -/** - * virt_to_phys - map virtual addresses to physical - * @address: address to remap - * - * The returned physical address is the physical (CPU) mapping for - * the memory address given. It is only valid to use this function on - * addresses directly mapped or allocated via kmalloc. - * - * This function does not give bus mappings for DMA transfers. In - * almost all conceivable cases a device driver should not be using - * this function - */ -static inline unsigned long virt_to_phys(volatile void * address) -{ - return __pa((unsigned long)address); -} - -/** - * phys_to_virt - map physical address to virtual - * @address: address to remap - * - * The returned virtual address is a current CPU mapping for - * the memory address given. It is only valid to use this function on - * addresses that have a kernel mapping - * - * This function does not handle bus mappings for DMA transfers. In - * almost all conceivable cases a device driver should not be using - * this function - */ -static inline void * phys_to_virt(unsigned long address) -{ - return (void *)__va(address); -} - -/* - * Change "struct page" to physical address. - */ -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) - -/* We do NOT want virtual merging, it would put too much pressure on - * our iommu allocator. Instead, we want drivers to be smart enough - * to coalesce sglists that happen to have been mapped in a contiguous - * way by the iommu - */ -#define BIO_VMERGE_BOUNDARY 0 - -/* - * 32 bits still uses virt_to_bus() for it's implementation of DMA - * mappings se we have to keep it defined here. We also have some old - * drivers (shame shame shame) that use bus_to_virt() and haven't been - * fixed yet so I need to define it here. - */ -#ifdef CONFIG_PPC32 - -static inline unsigned long virt_to_bus(volatile void * address) -{ - if (address == NULL) - return 0; - return __pa(address) + PCI_DRAM_OFFSET; -} - -static inline void * bus_to_virt(unsigned long address) -{ - if (address == 0) - return NULL; - return __va(address - PCI_DRAM_OFFSET); -} - -#define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET) - -#endif /* CONFIG_PPC32 */ - -/* access ports */ -#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v)) -#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v)) - -#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v)) -#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v)) - -#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v)) -#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v)) - -/* Clear and set bits in one shot. These macros can be used to clear and - * set multiple bits in a register using a single read-modify-write. These - * macros can also be used to set a multiple-bit bit pattern using a mask, - * by specifying the mask in the 'clear' parameter and the new bit pattern - * in the 'set' parameter. - */ - -#define clrsetbits(type, addr, clear, set) \ - out_##type((addr), (in_##type(addr) & ~(clear)) | (set)) - -#ifdef __powerpc64__ -#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set) -#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set) -#endif - -#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set) -#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) - -#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) -#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) - -#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) - -void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset, - size_t size, unsigned long flags); - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_IO_H */ diff --git a/include/asm-powerpc/ioctl.h b/include/asm-powerpc/ioctl.h deleted file mode 100644 index 57d68304218b..000000000000 --- a/include/asm-powerpc/ioctl.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_POWERPC_IOCTL_H -#define _ASM_POWERPC_IOCTL_H - -#define _IOC_SIZEBITS 13 -#define _IOC_DIRBITS 3 - -#define _IOC_NONE 1U -#define _IOC_READ 2U -#define _IOC_WRITE 4U - -#include - -#endif /* _ASM_POWERPC_IOCTL_H */ diff --git a/include/asm-powerpc/ioctls.h b/include/asm-powerpc/ioctls.h deleted file mode 100644 index 279a6229584b..000000000000 --- a/include/asm-powerpc/ioctls.h +++ /dev/null @@ -1,110 +0,0 @@ -#ifndef _ASM_POWERPC_IOCTLS_H -#define _ASM_POWERPC_IOCTLS_H - -#include - -#define FIOCLEX _IO('f', 1) -#define FIONCLEX _IO('f', 2) -#define FIOASYNC _IOW('f', 125, int) -#define FIONBIO _IOW('f', 126, int) -#define FIONREAD _IOR('f', 127, int) -#define TIOCINQ FIONREAD -#define FIOQSIZE _IOR('f', 128, loff_t) - -#define TIOCGETP _IOR('t', 8, struct sgttyb) -#define TIOCSETP _IOW('t', 9, struct sgttyb) -#define TIOCSETN _IOW('t', 10, struct sgttyb) /* TIOCSETP wo flush */ - -#define TIOCSETC _IOW('t', 17, struct tchars) -#define TIOCGETC _IOR('t', 18, struct tchars) -#define TCGETS _IOR('t', 19, struct termios) -#define TCSETS _IOW('t', 20, struct termios) -#define TCSETSW _IOW('t', 21, struct termios) -#define TCSETSF _IOW('t', 22, struct termios) - -#define TCGETA _IOR('t', 23, struct termio) -#define TCSETA _IOW('t', 24, struct termio) -#define TCSETAW _IOW('t', 25, struct termio) -#define TCSETAF _IOW('t', 28, struct termio) - -#define TCSBRK _IO('t', 29) -#define TCXONC _IO('t', 30) -#define TCFLSH _IO('t', 31) - -#define TIOCSWINSZ _IOW('t', 103, struct winsize) -#define TIOCGWINSZ _IOR('t', 104, struct winsize) -#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ -#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ -#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ - -#define TIOCGLTC _IOR('t', 116, struct ltchars) -#define TIOCSLTC _IOW('t', 117, struct ltchars) -#define TIOCSPGRP _IOW('t', 118, int) -#define TIOCGPGRP _IOR('t', 119, int) - -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E - -#define TIOCSTI 0x5412 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -# define TIOCM_LE 0x001 -# define TIOCM_DTR 0x002 -# define TIOCM_RTS 0x004 -# define TIOCM_ST 0x008 -# define TIOCM_SR 0x010 -# define TIOCM_CTS 0x020 -# define TIOCM_CAR 0x040 -# define TIOCM_RNG 0x080 -# define TIOCM_DSR 0x100 -# define TIOCM_CD TIOCM_CAR -# define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -# define TIOCPKT_DATA 0 -# define TIOCPKT_FLUSHREAD 1 -# define TIOCPKT_FLUSHWRITE 2 -# define TIOCPKT_STOP 4 -# define TIOCPKT_START 8 -# define TIOCPKT_NOSTOP 16 -# define TIOCPKT_DOSTOP 32 - - -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ - /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ -# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ - -#endif /* _ASM_POWERPC_IOCTLS_H */ diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h deleted file mode 100644 index 51ecfef8d843..000000000000 --- a/include/asm-powerpc/iommu.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation - * Rewrite, cleanup: - * Copyright (C) 2004 Olof Johansson , IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ASM_IOMMU_H -#define _ASM_IOMMU_H -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include -#include -#include - -#define IOMMU_PAGE_SHIFT 12 -#define IOMMU_PAGE_SIZE (ASM_CONST(1) << IOMMU_PAGE_SHIFT) -#define IOMMU_PAGE_MASK (~((1 << IOMMU_PAGE_SHIFT) - 1)) -#define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE) - -/* Boot time flags */ -extern int iommu_is_off; -extern int iommu_force_on; - -/* Pure 2^n version of get_order */ -static __inline__ __attribute_const__ int get_iommu_order(unsigned long size) -{ - return __ilog2((size - 1) >> IOMMU_PAGE_SHIFT) + 1; -} - - -/* - * IOMAP_MAX_ORDER defines the largest contiguous block - * of dma space we can get. IOMAP_MAX_ORDER = 13 - * allows up to 2**12 pages (4096 * 4096) = 16 MB - */ -#define IOMAP_MAX_ORDER 13 - -struct iommu_table { - unsigned long it_busno; /* Bus number this table belongs to */ - unsigned long it_size; /* Size of iommu table in entries */ - unsigned long it_offset; /* Offset into global table */ - unsigned long it_base; /* mapped address of tce table */ - unsigned long it_index; /* which iommu table this is */ - unsigned long it_type; /* type: PCI or Virtual Bus */ - unsigned long it_blocksize; /* Entries in each block (cacheline) */ - unsigned long it_hint; /* Hint for next alloc */ - unsigned long it_largehint; /* Hint for large allocs */ - unsigned long it_halfpoint; /* Breaking point for small/large allocs */ - spinlock_t it_lock; /* Protects it_map */ - unsigned long *it_map; /* A simple allocation bitmap for now */ -}; - -struct scatterlist; - -/* Frees table for an individual device node */ -extern void iommu_free_table(struct iommu_table *tbl, const char *node_name); - -/* Initializes an iommu_table based in values set in the passed-in - * structure - */ -extern struct iommu_table *iommu_init_table(struct iommu_table * tbl, - int nid); - -extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl, - struct scatterlist *sglist, int nelems, - unsigned long mask, enum dma_data_direction direction, - struct dma_attrs *attrs); -extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction, - struct dma_attrs *attrs); - -extern void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl, - size_t size, dma_addr_t *dma_handle, - unsigned long mask, gfp_t flag, int node); -extern void iommu_free_coherent(struct iommu_table *tbl, size_t size, - void *vaddr, dma_addr_t dma_handle); -extern dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl, - void *vaddr, size_t size, unsigned long mask, - enum dma_data_direction direction, - struct dma_attrs *attrs); -extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction, - struct dma_attrs *attrs); - -extern void iommu_init_early_pSeries(void); -extern void iommu_init_early_iSeries(void); -extern void iommu_init_early_dart(void); -extern void iommu_init_early_pasemi(void); - -#ifdef CONFIG_PCI -extern void pci_iommu_init(void); -extern void pci_direct_iommu_init(void); -#else -static inline void pci_iommu_init(void) { } -#endif - -extern void alloc_dart_table(void); -#if defined(CONFIG_PPC64) && defined(CONFIG_PM) -static inline void iommu_save(void) -{ - if (ppc_md.iommu_save) - ppc_md.iommu_save(); -} - -static inline void iommu_restore(void) -{ - if (ppc_md.iommu_restore) - ppc_md.iommu_restore(); -} -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_IOMMU_H */ diff --git a/include/asm-powerpc/ipcbuf.h b/include/asm-powerpc/ipcbuf.h deleted file mode 100644 index 2c3e1d94db1d..000000000000 --- a/include/asm-powerpc/ipcbuf.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef _ASM_POWERPC_IPCBUF_H -#define _ASM_POWERPC_IPCBUF_H - -/* - * The ipc64_perm structure for the powerpc is identical to - * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the - * kernel. Note extra padding because this structure is passed back - * and forth between kernel and user space. Pad space is left for: - * - 1 32-bit value to fill up for 8-byte alignment - * - 2 miscellaneous 64-bit values - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid_t uid; - __kernel_gid_t gid; - __kernel_uid_t cuid; - __kernel_gid_t cgid; - __kernel_mode_t mode; - unsigned int seq; - unsigned int __pad1; - unsigned long long __unused1; - unsigned long long __unused2; -}; - -#endif /* _ASM_POWERPC_IPCBUF_H */ diff --git a/include/asm-powerpc/ipic.h b/include/asm-powerpc/ipic.h deleted file mode 100644 index 8ff08be00146..000000000000 --- a/include/asm-powerpc/ipic.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * include/asm-powerpc/ipic.h - * - * IPIC external definitions and structure. - * - * Maintainer: Kumar Gala - * - * Copyright 2005 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifdef __KERNEL__ -#ifndef __ASM_IPIC_H__ -#define __ASM_IPIC_H__ - -#include - -/* Flags when we init the IPIC */ -#define IPIC_SPREADMODE_GRP_A 0x00000001 -#define IPIC_SPREADMODE_GRP_B 0x00000002 -#define IPIC_SPREADMODE_GRP_C 0x00000004 -#define IPIC_SPREADMODE_GRP_D 0x00000008 -#define IPIC_SPREADMODE_MIX_A 0x00000010 -#define IPIC_SPREADMODE_MIX_B 0x00000020 -#define IPIC_DISABLE_MCP_OUT 0x00000040 -#define IPIC_IRQ0_MCP 0x00000080 - -/* IPIC registers offsets */ -#define IPIC_SICFR 0x00 /* System Global Interrupt Configuration Register */ -#define IPIC_SIVCR 0x04 /* System Global Interrupt Vector Register */ -#define IPIC_SIPNR_H 0x08 /* System Internal Interrupt Pending Register (HIGH) */ -#define IPIC_SIPNR_L 0x0C /* System Internal Interrupt Pending Register (LOW) */ -#define IPIC_SIPRR_A 0x10 /* System Internal Interrupt group A Priority Register */ -#define IPIC_SIPRR_B 0x14 /* System Internal Interrupt group B Priority Register */ -#define IPIC_SIPRR_C 0x18 /* System Internal Interrupt group C Priority Register */ -#define IPIC_SIPRR_D 0x1C /* System Internal Interrupt group D Priority Register */ -#define IPIC_SIMSR_H 0x20 /* System Internal Interrupt Mask Register (HIGH) */ -#define IPIC_SIMSR_L 0x24 /* System Internal Interrupt Mask Register (LOW) */ -#define IPIC_SICNR 0x28 /* System Internal Interrupt Control Register */ -#define IPIC_SEPNR 0x2C /* System External Interrupt Pending Register */ -#define IPIC_SMPRR_A 0x30 /* System Mixed Interrupt group A Priority Register */ -#define IPIC_SMPRR_B 0x34 /* System Mixed Interrupt group B Priority Register */ -#define IPIC_SEMSR 0x38 /* System External Interrupt Mask Register */ -#define IPIC_SECNR 0x3C /* System External Interrupt Control Register */ -#define IPIC_SERSR 0x40 /* System Error Status Register */ -#define IPIC_SERMR 0x44 /* System Error Mask Register */ -#define IPIC_SERCR 0x48 /* System Error Control Register */ -#define IPIC_SIFCR_H 0x50 /* System Internal Interrupt Force Register (HIGH) */ -#define IPIC_SIFCR_L 0x54 /* System Internal Interrupt Force Register (LOW) */ -#define IPIC_SEFCR 0x58 /* System External Interrupt Force Register */ -#define IPIC_SERFR 0x5C /* System Error Force Register */ -#define IPIC_SCVCR 0x60 /* System Critical Interrupt Vector Register */ -#define IPIC_SMVCR 0x64 /* System Management Interrupt Vector Register */ - -enum ipic_prio_grp { - IPIC_INT_GRP_A = IPIC_SIPRR_A, - IPIC_INT_GRP_D = IPIC_SIPRR_D, - IPIC_MIX_GRP_A = IPIC_SMPRR_A, - IPIC_MIX_GRP_B = IPIC_SMPRR_B, -}; - -enum ipic_mcp_irq { - IPIC_MCP_IRQ0 = 0, - IPIC_MCP_WDT = 1, - IPIC_MCP_SBA = 2, - IPIC_MCP_PCI1 = 5, - IPIC_MCP_PCI2 = 6, - IPIC_MCP_MU = 7, -}; - -extern int ipic_set_priority(unsigned int irq, unsigned int priority); -extern void ipic_set_highest_priority(unsigned int irq); -extern void ipic_set_default_priority(void); -extern void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq); -extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq); -extern u32 ipic_get_mcp_status(void); -extern void ipic_clear_mcp_status(u32 mask); - -#ifdef CONFIG_PPC_MERGE -extern struct ipic * ipic_init(struct device_node *node, unsigned int flags); -extern unsigned int ipic_get_irq(void); -#else -extern void ipic_init(phys_addr_t phys_addr, unsigned int flags, - unsigned int irq_offset, - unsigned char *senses, unsigned int senses_count); -extern int ipic_get_irq(void); -#endif - -#endif /* __ASM_IPIC_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h deleted file mode 100644 index 1ef8e304e0ea..000000000000 --- a/include/asm-powerpc/irq.h +++ /dev/null @@ -1,654 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _ASM_POWERPC_IRQ_H -#define _ASM_POWERPC_IRQ_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include - -#include -#include - - -#define get_irq_desc(irq) (&irq_desc[(irq)]) - -/* Define a way to iterate across irqs. */ -#define for_each_irq(i) \ - for ((i) = 0; (i) < NR_IRQS; ++(i)) - -extern atomic_t ppc_n_lost_interrupts; - -#ifdef CONFIG_PPC_MERGE - -/* This number is used when no interrupt has been assigned */ -#define NO_IRQ (0) - -/* This is a special irq number to return from get_irq() to tell that - * no interrupt happened _and_ ignore it (don't count it as bad). Some - * platforms like iSeries rely on that. - */ -#define NO_IRQ_IGNORE ((unsigned int)-1) - -/* Total number of virq in the platform (make it a CONFIG_* option ? */ -#define NR_IRQS 512 - -/* Number of irqs reserved for the legacy controller */ -#define NUM_ISA_INTERRUPTS 16 - -/* This type is the placeholder for a hardware interrupt number. It has to - * be big enough to enclose whatever representation is used by a given - * platform. - */ -typedef unsigned long irq_hw_number_t; - -/* Interrupt controller "host" data structure. This could be defined as a - * irq domain controller. That is, it handles the mapping between hardware - * and virtual interrupt numbers for a given interrupt domain. The host - * structure is generally created by the PIC code for a given PIC instance - * (though a host can cover more than one PIC if they have a flat number - * model). It's the host callbacks that are responsible for setting the - * irq_chip on a given irq_desc after it's been mapped. - * - * The host code and data structures are fairly agnostic to the fact that - * we use an open firmware device-tree. We do have references to struct - * device_node in two places: in irq_find_host() to find the host matching - * a given interrupt controller node, and of course as an argument to its - * counterpart host->ops->match() callback. However, those are treated as - * generic pointers by the core and the fact that it's actually a device-node - * pointer is purely a convention between callers and implementation. This - * code could thus be used on other architectures by replacing those two - * by some sort of arch-specific void * "token" used to identify interrupt - * controllers. - */ -struct irq_host; -struct radix_tree_root; - -/* Functions below are provided by the host and called whenever a new mapping - * is created or an old mapping is disposed. The host can then proceed to - * whatever internal data structures management is required. It also needs - * to setup the irq_desc when returning from map(). - */ -struct irq_host_ops { - /* Match an interrupt controller device node to a host, returns - * 1 on a match - */ - int (*match)(struct irq_host *h, struct device_node *node); - - /* Create or update a mapping between a virtual irq number and a hw - * irq number. This is called only once for a given mapping. - */ - int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw); - - /* Dispose of such a mapping */ - void (*unmap)(struct irq_host *h, unsigned int virq); - - /* Update of such a mapping */ - void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw); - - /* Translate device-tree interrupt specifier from raw format coming - * from the firmware to a irq_hw_number_t (interrupt line number) and - * type (sense) that can be passed to set_irq_type(). In the absence - * of this callback, irq_create_of_mapping() and irq_of_parse_and_map() - * will return the hw number in the first cell and IRQ_TYPE_NONE for - * the type (which amount to keeping whatever default value the - * interrupt controller has for that line) - */ - int (*xlate)(struct irq_host *h, struct device_node *ctrler, - u32 *intspec, unsigned int intsize, - irq_hw_number_t *out_hwirq, unsigned int *out_type); -}; - -struct irq_host { - struct list_head link; - - /* type of reverse mapping technique */ - unsigned int revmap_type; -#define IRQ_HOST_MAP_LEGACY 0 /* legacy 8259, gets irqs 1..15 */ -#define IRQ_HOST_MAP_NOMAP 1 /* no fast reverse mapping */ -#define IRQ_HOST_MAP_LINEAR 2 /* linear map of interrupts */ -#define IRQ_HOST_MAP_TREE 3 /* radix tree */ - union { - struct { - unsigned int size; - unsigned int *revmap; - } linear; - struct radix_tree_root tree; - } revmap_data; - struct irq_host_ops *ops; - void *host_data; - irq_hw_number_t inval_irq; - - /* Optional device node pointer */ - struct device_node *of_node; -}; - -/* The main irq map itself is an array of NR_IRQ entries containing the - * associate host and irq number. An entry with a host of NULL is free. - * An entry can be allocated if it's free, the allocator always then sets - * hwirq first to the host's invalid irq number and then fills ops. - */ -struct irq_map_entry { - irq_hw_number_t hwirq; - struct irq_host *host; -}; - -extern struct irq_map_entry irq_map[NR_IRQS]; - -extern irq_hw_number_t virq_to_hw(unsigned int virq); - -/** - * irq_alloc_host - Allocate a new irq_host data structure - * @of_node: optional device-tree node of the interrupt controller - * @revmap_type: type of reverse mapping to use - * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map - * @ops: map/unmap host callbacks - * @inval_irq: provide a hw number in that host space that is always invalid - * - * Allocates and initialize and irq_host structure. Note that in the case of - * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns - * for all legacy interrupts except 0 (which is always the invalid irq for - * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by - * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated - * later during boot automatically (the reverse mapping will use the slow path - * until that happens). - */ -extern struct irq_host *irq_alloc_host(struct device_node *of_node, - unsigned int revmap_type, - unsigned int revmap_arg, - struct irq_host_ops *ops, - irq_hw_number_t inval_irq); - - -/** - * irq_find_host - Locates a host for a given device node - * @node: device-tree node of the interrupt controller - */ -extern struct irq_host *irq_find_host(struct device_node *node); - - -/** - * irq_set_default_host - Set a "default" host - * @host: default host pointer - * - * For convenience, it's possible to set a "default" host that will be used - * whenever NULL is passed to irq_create_mapping(). It makes life easier for - * platforms that want to manipulate a few hard coded interrupt numbers that - * aren't properly represented in the device-tree. - */ -extern void irq_set_default_host(struct irq_host *host); - - -/** - * irq_set_virq_count - Set the maximum number of virt irqs - * @count: number of linux virtual irqs, capped with NR_IRQS - * - * This is mainly for use by platforms like iSeries who want to program - * the virtual irq number in the controller to avoid the reverse mapping - */ -extern void irq_set_virq_count(unsigned int count); - - -/** - * irq_create_mapping - Map a hardware interrupt into linux virq space - * @host: host owning this hardware interrupt or NULL for default host - * @hwirq: hardware irq number in that host space - * - * Only one mapping per hardware interrupt is permitted. Returns a linux - * virq number. - * If the sense/trigger is to be specified, set_irq_type() should be called - * on the number returned from that call. - */ -extern unsigned int irq_create_mapping(struct irq_host *host, - irq_hw_number_t hwirq); - - -/** - * irq_dispose_mapping - Unmap an interrupt - * @virq: linux virq number of the interrupt to unmap - */ -extern void irq_dispose_mapping(unsigned int virq); - -/** - * irq_find_mapping - Find a linux virq from an hw irq number. - * @host: host owning this hardware interrupt - * @hwirq: hardware irq number in that host space - * - * This is a slow path, for use by generic code. It's expected that an - * irq controller implementation directly calls the appropriate low level - * mapping function. - */ -extern unsigned int irq_find_mapping(struct irq_host *host, - irq_hw_number_t hwirq); - -/** - * irq_create_direct_mapping - Allocate a virq for direct mapping - * @host: host to allocate the virq for or NULL for default host - * - * This routine is used for irq controllers which can choose the hardware - * interrupt numbers they generate. In such a case it's simplest to use - * the linux virq as the hardware interrupt number. - */ -extern unsigned int irq_create_direct_mapping(struct irq_host *host); - -/** - * irq_radix_revmap - Find a linux virq from a hw irq number. - * @host: host owning this hardware interrupt - * @hwirq: hardware irq number in that host space - * - * This is a fast path, for use by irq controller code that uses radix tree - * revmaps - */ -extern unsigned int irq_radix_revmap(struct irq_host *host, - irq_hw_number_t hwirq); - -/** - * irq_linear_revmap - Find a linux virq from a hw irq number. - * @host: host owning this hardware interrupt - * @hwirq: hardware irq number in that host space - * - * This is a fast path, for use by irq controller code that uses linear - * revmaps. It does fallback to the slow path if the revmap doesn't exist - * yet and will create the revmap entry with appropriate locking - */ - -extern unsigned int irq_linear_revmap(struct irq_host *host, - irq_hw_number_t hwirq); - - - -/** - * irq_alloc_virt - Allocate virtual irq numbers - * @host: host owning these new virtual irqs - * @count: number of consecutive numbers to allocate - * @hint: pass a hint number, the allocator will try to use a 1:1 mapping - * - * This is a low level function that is used internally by irq_create_mapping() - * and that can be used by some irq controllers implementations for things - * like allocating ranges of numbers for MSIs. The revmaps are left untouched. - */ -extern unsigned int irq_alloc_virt(struct irq_host *host, - unsigned int count, - unsigned int hint); - -/** - * irq_free_virt - Free virtual irq numbers - * @virq: virtual irq number of the first interrupt to free - * @count: number of interrupts to free - * - * This function is the opposite of irq_alloc_virt. It will not clear reverse - * maps, this should be done previously by unmap'ing the interrupt. In fact, - * all interrupts covered by the range being freed should have been unmapped - * prior to calling this. - */ -extern void irq_free_virt(unsigned int virq, unsigned int count); - - -/* -- OF helpers -- */ - -/* irq_create_of_mapping - Map a hardware interrupt into linux virq space - * @controller: Device node of the interrupt controller - * @inspec: Interrupt specifier from the device-tree - * @intsize: Size of the interrupt specifier from the device-tree - * - * This function is identical to irq_create_mapping except that it takes - * as input informations straight from the device-tree (typically the results - * of the of_irq_map_*() functions. - */ -extern unsigned int irq_create_of_mapping(struct device_node *controller, - u32 *intspec, unsigned int intsize); - - -/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space - * @device: Device node of the device whose interrupt is to be mapped - * @index: Index of the interrupt to map - * - * This function is a wrapper that chains of_irq_map_one() and - * irq_create_of_mapping() to make things easier to callers - */ -extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index); - -/* -- End OF helpers -- */ - -/** - * irq_early_init - Init irq remapping subsystem - */ -extern void irq_early_init(void); - -static __inline__ int irq_canonicalize(int irq) -{ - return irq; -} - - -#else /* CONFIG_PPC_MERGE */ - -/* This number is used when no interrupt has been assigned */ -#define NO_IRQ (-1) -#define NO_IRQ_IGNORE (-2) - - -/* - * These constants are used for passing information about interrupt - * signal polarity and level/edge sensing to the low-level PIC chip - * drivers. - */ -#define IRQ_SENSE_MASK 0x1 -#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */ -#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */ - -#define IRQ_POLARITY_MASK 0x2 -#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */ -#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */ - - -#if defined(CONFIG_40x) -#include - -#ifndef NR_BOARD_IRQS -#define NR_BOARD_IRQS 0 -#endif - -#ifndef UIC_WIDTH /* Number of interrupts per device */ -#define UIC_WIDTH 32 -#endif - -#ifndef NR_UICS /* number of UIC devices */ -#define NR_UICS 1 -#endif - -#if defined (CONFIG_403) -/* - * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has - * 32 possible interrupts, a majority of which are not implemented on - * all cores. There are six configurable, external interrupt pins and - * there are eight internal interrupts for the on-chip serial port - * (SPU), DMA controller, and JTAG controller. - * - */ - -#define NR_AIC_IRQS 32 -#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS) - -#elif !defined (CONFIG_403) - -/* - * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32 - * possible interrupts as well. There are seven, configurable external - * interrupt pins and there are 17 internal interrupts for the on-chip - * serial port, DMA controller, on-chip Ethernet controller, PCI, etc. - * - */ - - -#define NR_UIC_IRQS UIC_WIDTH -#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) -#endif - -#elif defined(CONFIG_44x) -#include - -#define NR_UIC_IRQS 32 -#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) - -#elif defined(CONFIG_8xx) - -/* Now include the board configuration specific associations. -*/ -#include - -/* The MPC8xx cores have 16 possible interrupts. There are eight - * possible level sensitive interrupts assigned and generated internally - * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer. - * There are eight external interrupts (IRQs) that can be configured - * as either level or edge sensitive. - * - * On some implementations, there is also the possibility of an 8259 - * through the PCI and PCI-ISA bridges. - * - * We are "flattening" the interrupt vectors of the cascaded CPM - * and 8259 interrupt controllers so that we can uniquely identify - * any interrupt source with a single integer. - */ -#define NR_SIU_INTS 16 -#define NR_CPM_INTS 32 -#ifndef NR_8259_INTS -#define NR_8259_INTS 0 -#endif - -#define SIU_IRQ_OFFSET 0 -#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS) -#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS) - -#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS) - -/* These values must be zero-based and map 1:1 with the SIU configuration. - * They are used throughout the 8xx I/O subsystem to generate - * interrupt masks, flags, and other control patterns. This is why the - * current kernel assumption of the 8259 as the base controller is such - * a pain in the butt. - */ -#define SIU_IRQ0 (0) /* Highest priority */ -#define SIU_LEVEL0 (1) -#define SIU_IRQ1 (2) -#define SIU_LEVEL1 (3) -#define SIU_IRQ2 (4) -#define SIU_LEVEL2 (5) -#define SIU_IRQ3 (6) -#define SIU_LEVEL3 (7) -#define SIU_IRQ4 (8) -#define SIU_LEVEL4 (9) -#define SIU_IRQ5 (10) -#define SIU_LEVEL5 (11) -#define SIU_IRQ6 (12) -#define SIU_LEVEL6 (13) -#define SIU_IRQ7 (14) -#define SIU_LEVEL7 (15) - -#define MPC8xx_INT_FEC1 SIU_LEVEL1 -#define MPC8xx_INT_FEC2 SIU_LEVEL3 - -#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1) -#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2) -#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3) -#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4) -#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1) -#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2) - -/* The internal interrupts we can configure as we see fit. - * My personal preference is CPM at level 2, which puts it above the - * MBX PCI/ISA/IDE interrupts. - */ -#ifndef PIT_INTERRUPT -#define PIT_INTERRUPT SIU_LEVEL0 -#endif -#ifndef CPM_INTERRUPT -#define CPM_INTERRUPT SIU_LEVEL2 -#endif -#ifndef PCMCIA_INTERRUPT -#define PCMCIA_INTERRUPT SIU_LEVEL6 -#endif -#ifndef DEC_INTERRUPT -#define DEC_INTERRUPT SIU_LEVEL7 -#endif - -/* Some internal interrupt registers use an 8-bit mask for the interrupt - * level instead of a number. - */ -#define mk_int_int_mask(IL) (1 << (7 - (IL/2))) - -#else /* CONFIG_40x + CONFIG_8xx */ -/* - * this is the # irq's for all ppc arch's (pmac/chrp/prep) - * so it is the max of them all - */ -#define NR_IRQS 256 -#define __DO_IRQ_CANON 1 - -#ifndef CONFIG_8260 - -#define NUM_8259_INTERRUPTS 16 - -#else /* CONFIG_8260 */ - -/* The 8260 has an internal interrupt controller with a maximum of - * 64 IRQs. We will use NR_IRQs from above since it is large enough. - * Don't be confused by the 8260 documentation where they list an - * "interrupt number" and "interrupt vector". We are only interested - * in the interrupt vector. There are "reserved" holes where the - * vector number increases, but the interrupt number in the table does not. - * (Document errata updates have fixed this...make sure you have up to - * date processor documentation -- Dan). - */ - -#ifndef CPM_IRQ_OFFSET -#define CPM_IRQ_OFFSET 0 -#endif - -#define NR_CPM_INTS 64 - -#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET) -#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET) -#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET) -#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET) -#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET) -#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET) -#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET) -#define SIU_INT_USB ((uint)0x0b + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET) -#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET) -#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET) -#define SIU_INT_PCI ((uint)0x12 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET) -#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET) -#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET) -#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET) -#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET) -#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET) -#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET) -#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET) -#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET) -#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET) -#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET) -#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET) -#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET) -#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET) -#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET) -#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET) -#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET) -#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET) -#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET) -#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET) - -#endif /* CONFIG_8260 */ - -#endif /* Whatever way too big #ifdef */ - -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -/* pedantic: these are long because they are used with set_bit --RR */ -extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; - -/* - * Because many systems have two overlapping names spaces for - * interrupts (ISA and XICS for example), and the ISA interrupts - * have historically not been easy to renumber, we allow ISA - * interrupts to take values 0 - 15, and shift up the remaining - * interrupts by 0x10. - */ -#define NUM_ISA_INTERRUPTS 0x10 -extern int __irq_offset_value; - -static inline int irq_offset_up(int irq) -{ - return(irq + __irq_offset_value); -} - -static inline int irq_offset_down(int irq) -{ - return(irq - __irq_offset_value); -} - -static inline int irq_offset_value(void) -{ - return __irq_offset_value; -} - -#ifdef __DO_IRQ_CANON -extern int ppc_do_canonicalize_irqs; -#else -#define ppc_do_canonicalize_irqs 0 -#endif - -static __inline__ int irq_canonicalize(int irq) -{ - if (ppc_do_canonicalize_irqs && irq == 2) - irq = 9; - return irq; -} -#endif /* CONFIG_PPC_MERGE */ - -extern int distribute_irqs; - -struct irqaction; -struct pt_regs; - -#define __ARCH_HAS_DO_SOFTIRQ - -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) -/* - * Per-cpu stacks for handling critical, debug and machine check - * level interrupts. - */ -extern struct thread_info *critirq_ctx[NR_CPUS]; -extern struct thread_info *dbgirq_ctx[NR_CPUS]; -extern struct thread_info *mcheckirq_ctx[NR_CPUS]; -extern void exc_lvl_ctx_init(void); -#else -#define exc_lvl_ctx_init() -#endif - -#ifdef CONFIG_IRQSTACKS -/* - * Per-cpu stacks for handling hard and soft interrupts. - */ -extern struct thread_info *hardirq_ctx[NR_CPUS]; -extern struct thread_info *softirq_ctx[NR_CPUS]; - -extern void irq_ctx_init(void); -extern void call_do_softirq(struct thread_info *tp); -extern int call_handle_irq(int irq, void *p1, - struct thread_info *tp, void *func); -#else -#define irq_ctx_init() - -#endif /* CONFIG_IRQSTACKS */ - -extern void do_IRQ(struct pt_regs *regs); - -#endif /* _ASM_IRQ_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/irq_regs.h b/include/asm-powerpc/irq_regs.h deleted file mode 100644 index ba94b51a0a70..000000000000 --- a/include/asm-powerpc/irq_regs.h +++ /dev/null @@ -1,2 +0,0 @@ -#include - diff --git a/include/asm-powerpc/irqflags.h b/include/asm-powerpc/irqflags.h deleted file mode 100644 index cc6fdba33660..000000000000 --- a/include/asm-powerpc/irqflags.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-powerpc/irqflags.h - * - * IRQ flags handling - */ -#ifndef _ASM_IRQFLAGS_H -#define _ASM_IRQFLAGS_H - -#ifndef __ASSEMBLY__ -/* - * Get definitions for raw_local_save_flags(x), etc. - */ -#include - -#else -#ifdef CONFIG_TRACE_IRQFLAGS -/* - * Most of the CPU's IRQ-state tracing is done from assembly code; we - * have to call a C function so call a wrapper that saves all the - * C-clobbered registers. - */ -#define TRACE_ENABLE_INTS bl .trace_hardirqs_on -#define TRACE_DISABLE_INTS bl .trace_hardirqs_off -#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) \ - cmpdi en, 0; \ - bne 95f; \ - stb en,PACASOFTIRQEN(r13); \ - bl .trace_hardirqs_off; \ - b skip; \ -95: bl .trace_hardirqs_on; \ - li en,1; -#define TRACE_AND_RESTORE_IRQ(en) \ - TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f); \ -96: stb en,PACASOFTIRQEN(r13) -#else -#define TRACE_ENABLE_INTS -#define TRACE_DISABLE_INTS -#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) -#define TRACE_AND_RESTORE_IRQ(en) \ - stb en,PACASOFTIRQEN(r13) -#endif -#endif - -#endif diff --git a/include/asm-powerpc/iseries/alpaca.h b/include/asm-powerpc/iseries/alpaca.h deleted file mode 100644 index c0cce6727a69..000000000000 --- a/include/asm-powerpc/iseries/alpaca.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright © 2008 Stephen Rothwell IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_ALPACA_H -#define _ASM_POWERPC_ISERIES_ALPACA_H - -/* - * This is the part of the paca that the iSeries hypervisor - * needs to be statically initialised. Immediately after boot - * we switch to the normal Linux paca. - */ -struct alpaca { - struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */ - const void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */ -}; - -#endif /* _ASM_POWERPC_ISERIES_ALPACA_H */ diff --git a/include/asm-powerpc/iseries/hv_call.h b/include/asm-powerpc/iseries/hv_call.h deleted file mode 100644 index 162d653ad51f..000000000000 --- a/include/asm-powerpc/iseries/hv_call.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * This file contains the "hypervisor call" interface which is used to - * drive the hypervisor from the OS. - */ -#ifndef _ASM_POWERPC_ISERIES_HV_CALL_H -#define _ASM_POWERPC_ISERIES_HV_CALL_H - -#include -#include -#include - -/* Type of yield for HvCallBaseYieldProcessor */ -#define HvCall_YieldTimed 0 /* Yield until specified time (tb) */ -#define HvCall_YieldToActive 1 /* Yield until all active procs have run */ -#define HvCall_YieldToProc 2 /* Yield until the specified processor has run */ - -/* interrupt masks for setEnabledInterrupts */ -#define HvCall_MaskIPI 0x00000001 -#define HvCall_MaskLpEvent 0x00000002 -#define HvCall_MaskLpProd 0x00000004 -#define HvCall_MaskTimeout 0x00000008 - -/* Log buffer formats */ -#define HvCall_LogBuffer_ASCII 0 -#define HvCall_LogBuffer_EBCDIC 1 - -#define HvCallBaseAckDeferredInts HvCallBase + 0 -#define HvCallBaseCpmPowerOff HvCallBase + 1 -#define HvCallBaseGetHwPatch HvCallBase + 2 -#define HvCallBaseReIplSpAttn HvCallBase + 3 -#define HvCallBaseSetASR HvCallBase + 4 -#define HvCallBaseSetASRAndRfi HvCallBase + 5 -#define HvCallBaseSetIMR HvCallBase + 6 -#define HvCallBaseSendIPI HvCallBase + 7 -#define HvCallBaseTerminateMachine HvCallBase + 8 -#define HvCallBaseTerminateMachineSrc HvCallBase + 9 -#define HvCallBaseProcessPlicInterrupts HvCallBase + 10 -#define HvCallBaseIsPrimaryCpmOrMsdIpl HvCallBase + 11 -#define HvCallBaseSetVirtualSIT HvCallBase + 12 -#define HvCallBaseVaryOffThisProcessor HvCallBase + 13 -#define HvCallBaseVaryOffMemoryChunk HvCallBase + 14 -#define HvCallBaseVaryOffInteractivePercentage HvCallBase + 15 -#define HvCallBaseSendLpProd HvCallBase + 16 -#define HvCallBaseSetEnabledInterrupts HvCallBase + 17 -#define HvCallBaseYieldProcessor HvCallBase + 18 -#define HvCallBaseVaryOffSharedProcUnits HvCallBase + 19 -#define HvCallBaseSetVirtualDecr HvCallBase + 20 -#define HvCallBaseClearLogBuffer HvCallBase + 21 -#define HvCallBaseGetLogBufferCodePage HvCallBase + 22 -#define HvCallBaseGetLogBufferFormat HvCallBase + 23 -#define HvCallBaseGetLogBufferLength HvCallBase + 24 -#define HvCallBaseReadLogBuffer HvCallBase + 25 -#define HvCallBaseSetLogBufferFormatAndCodePage HvCallBase + 26 -#define HvCallBaseWriteLogBuffer HvCallBase + 27 -#define HvCallBaseRouter28 HvCallBase + 28 -#define HvCallBaseRouter29 HvCallBase + 29 -#define HvCallBaseRouter30 HvCallBase + 30 -#define HvCallBaseSetDebugBus HvCallBase + 31 - -#define HvCallCcSetDABR HvCallCc + 7 - -static inline void HvCall_setVirtualDecr(void) -{ - /* - * Ignore any error return codes - most likely means that the - * target value for the LP has been increased and this vary off - * would bring us below the new target. - */ - HvCall0(HvCallBaseSetVirtualDecr); -} - -static inline void HvCall_yieldProcessor(unsigned typeOfYield, u64 yieldParm) -{ - HvCall2(HvCallBaseYieldProcessor, typeOfYield, yieldParm); -} - -static inline void HvCall_setEnabledInterrupts(u64 enabledInterrupts) -{ - HvCall1(HvCallBaseSetEnabledInterrupts, enabledInterrupts); -} - -static inline void HvCall_setLogBufferFormatAndCodepage(int format, - u32 codePage) -{ - HvCall2(HvCallBaseSetLogBufferFormatAndCodePage, format, codePage); -} - -extern void HvCall_writeLogBuffer(const void *buffer, u64 bufLen); - -static inline void HvCall_sendIPI(struct paca_struct *targetPaca) -{ - HvCall1(HvCallBaseSendIPI, targetPaca->paca_index); -} - -#endif /* _ASM_POWERPC_ISERIES_HV_CALL_H */ diff --git a/include/asm-powerpc/iseries/hv_call_event.h b/include/asm-powerpc/iseries/hv_call_event.h deleted file mode 100644 index cc029d388e11..000000000000 --- a/include/asm-powerpc/iseries/hv_call_event.h +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * This file contains the "hypervisor call" interface which is used to - * drive the hypervisor from the OS. - */ -#ifndef _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H -#define _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H - -#include -#include - -#include -#include -#include - -struct HvLpEvent; - -typedef u8 HvLpEvent_Type; -typedef u8 HvLpEvent_AckInd; -typedef u8 HvLpEvent_AckType; - -typedef u8 HvLpDma_Direction; -typedef u8 HvLpDma_AddressType; - -typedef u64 HvLpEvent_Rc; -typedef u64 HvLpDma_Rc; - -#define HvCallEventAckLpEvent HvCallEvent + 0 -#define HvCallEventCancelLpEvent HvCallEvent + 1 -#define HvCallEventCloseLpEventPath HvCallEvent + 2 -#define HvCallEventDmaBufList HvCallEvent + 3 -#define HvCallEventDmaSingle HvCallEvent + 4 -#define HvCallEventDmaToSp HvCallEvent + 5 -#define HvCallEventGetOverflowLpEvents HvCallEvent + 6 -#define HvCallEventGetSourceLpInstanceId HvCallEvent + 7 -#define HvCallEventGetTargetLpInstanceId HvCallEvent + 8 -#define HvCallEventOpenLpEventPath HvCallEvent + 9 -#define HvCallEventSetLpEventStack HvCallEvent + 10 -#define HvCallEventSignalLpEvent HvCallEvent + 11 -#define HvCallEventSignalLpEventParms HvCallEvent + 12 -#define HvCallEventSetInterLpQueueIndex HvCallEvent + 13 -#define HvCallEventSetLpEventQueueInterruptProc HvCallEvent + 14 -#define HvCallEventRouter15 HvCallEvent + 15 - -static inline void HvCallEvent_getOverflowLpEvents(u8 queueIndex) -{ - HvCall1(HvCallEventGetOverflowLpEvents, queueIndex); -} - -static inline void HvCallEvent_setInterLpQueueIndex(u8 queueIndex) -{ - HvCall1(HvCallEventSetInterLpQueueIndex, queueIndex); -} - -static inline void HvCallEvent_setLpEventStack(u8 queueIndex, - char *eventStackAddr, u32 eventStackSize) -{ - HvCall3(HvCallEventSetLpEventStack, queueIndex, - virt_to_abs(eventStackAddr), eventStackSize); -} - -static inline void HvCallEvent_setLpEventQueueInterruptProc(u8 queueIndex, - u16 lpLogicalProcIndex) -{ - HvCall2(HvCallEventSetLpEventQueueInterruptProc, queueIndex, - lpLogicalProcIndex); -} - -static inline HvLpEvent_Rc HvCallEvent_signalLpEvent(struct HvLpEvent *event) -{ - return HvCall1(HvCallEventSignalLpEvent, virt_to_abs(event)); -} - -static inline HvLpEvent_Rc HvCallEvent_signalLpEventFast(HvLpIndex targetLp, - HvLpEvent_Type type, u16 subtype, HvLpEvent_AckInd ackInd, - HvLpEvent_AckType ackType, HvLpInstanceId sourceInstanceId, - HvLpInstanceId targetInstanceId, u64 correlationToken, - u64 eventData1, u64 eventData2, u64 eventData3, - u64 eventData4, u64 eventData5) -{ - /* Pack the misc bits into a single Dword to pass to PLIC */ - union { - struct { - u8 ack_and_target; - u8 type; - u16 subtype; - HvLpInstanceId src_inst; - HvLpInstanceId target_inst; - } parms; - u64 dword; - } packed; - - packed.parms.ack_and_target = (ackType << 7) | (ackInd << 6) | targetLp; - packed.parms.type = type; - packed.parms.subtype = subtype; - packed.parms.src_inst = sourceInstanceId; - packed.parms.target_inst = targetInstanceId; - - return HvCall7(HvCallEventSignalLpEventParms, packed.dword, - correlationToken, eventData1, eventData2, - eventData3, eventData4, eventData5); -} - -extern void *iseries_hv_alloc(size_t size, dma_addr_t *dma_handle, gfp_t flag); -extern void iseries_hv_free(size_t size, void *vaddr, dma_addr_t dma_handle); -extern dma_addr_t iseries_hv_map(void *vaddr, size_t size, - enum dma_data_direction direction); -extern void iseries_hv_unmap(dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction); - -static inline HvLpEvent_Rc HvCallEvent_ackLpEvent(struct HvLpEvent *event) -{ - return HvCall1(HvCallEventAckLpEvent, virt_to_abs(event)); -} - -static inline HvLpEvent_Rc HvCallEvent_cancelLpEvent(struct HvLpEvent *event) -{ - return HvCall1(HvCallEventCancelLpEvent, virt_to_abs(event)); -} - -static inline HvLpInstanceId HvCallEvent_getSourceLpInstanceId( - HvLpIndex targetLp, HvLpEvent_Type type) -{ - return HvCall2(HvCallEventGetSourceLpInstanceId, targetLp, type); -} - -static inline HvLpInstanceId HvCallEvent_getTargetLpInstanceId( - HvLpIndex targetLp, HvLpEvent_Type type) -{ - return HvCall2(HvCallEventGetTargetLpInstanceId, targetLp, type); -} - -static inline void HvCallEvent_openLpEventPath(HvLpIndex targetLp, - HvLpEvent_Type type) -{ - HvCall2(HvCallEventOpenLpEventPath, targetLp, type); -} - -static inline void HvCallEvent_closeLpEventPath(HvLpIndex targetLp, - HvLpEvent_Type type) -{ - HvCall2(HvCallEventCloseLpEventPath, targetLp, type); -} - -static inline HvLpDma_Rc HvCallEvent_dmaBufList(HvLpEvent_Type type, - HvLpIndex remoteLp, HvLpDma_Direction direction, - HvLpInstanceId localInstanceId, - HvLpInstanceId remoteInstanceId, - HvLpDma_AddressType localAddressType, - HvLpDma_AddressType remoteAddressType, - /* Do these need to be converted to absolute addresses? */ - u64 localBufList, u64 remoteBufList, u32 transferLength) -{ - /* Pack the misc bits into a single Dword to pass to PLIC */ - union { - struct { - u8 flags; - HvLpIndex remote; - u8 type; - u8 reserved; - HvLpInstanceId local_inst; - HvLpInstanceId remote_inst; - } parms; - u64 dword; - } packed; - - packed.parms.flags = (direction << 7) | - (localAddressType << 6) | (remoteAddressType << 5); - packed.parms.remote = remoteLp; - packed.parms.type = type; - packed.parms.reserved = 0; - packed.parms.local_inst = localInstanceId; - packed.parms.remote_inst = remoteInstanceId; - - return HvCall4(HvCallEventDmaBufList, packed.dword, localBufList, - remoteBufList, transferLength); -} - -static inline HvLpDma_Rc HvCallEvent_dmaToSp(void *local, u32 remote, - u32 length, HvLpDma_Direction dir) -{ - return HvCall4(HvCallEventDmaToSp, virt_to_abs(local), remote, - length, dir); -} - -#endif /* _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H */ diff --git a/include/asm-powerpc/iseries/hv_call_sc.h b/include/asm-powerpc/iseries/hv_call_sc.h deleted file mode 100644 index f5d210959250..000000000000 --- a/include/asm-powerpc/iseries/hv_call_sc.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_HV_CALL_SC_H -#define _ASM_POWERPC_ISERIES_HV_CALL_SC_H - -#include - -#define HvCallBase 0x8000000000000000ul -#define HvCallCc 0x8001000000000000ul -#define HvCallCfg 0x8002000000000000ul -#define HvCallEvent 0x8003000000000000ul -#define HvCallHpt 0x8004000000000000ul -#define HvCallPci 0x8005000000000000ul -#define HvCallSm 0x8007000000000000ul -#define HvCallXm 0x8009000000000000ul - -extern u64 HvCall0(u64); -extern u64 HvCall1(u64, u64); -extern u64 HvCall2(u64, u64, u64); -extern u64 HvCall3(u64, u64, u64, u64); -extern u64 HvCall4(u64, u64, u64, u64, u64); -extern u64 HvCall5(u64, u64, u64, u64, u64, u64); -extern u64 HvCall6(u64, u64, u64, u64, u64, u64, u64); -extern u64 HvCall7(u64, u64, u64, u64, u64, u64, u64, u64); - -extern u64 HvCall0Ret16(u64, void *); -extern u64 HvCall1Ret16(u64, void *, u64); -extern u64 HvCall2Ret16(u64, void *, u64, u64); -extern u64 HvCall3Ret16(u64, void *, u64, u64, u64); -extern u64 HvCall4Ret16(u64, void *, u64, u64, u64, u64); -extern u64 HvCall5Ret16(u64, void *, u64, u64, u64, u64, u64); -extern u64 HvCall6Ret16(u64, void *, u64, u64, u64, u64, u64, u64); -extern u64 HvCall7Ret16(u64, void *, u64, u64 ,u64 ,u64 ,u64 ,u64 ,u64); - -#endif /* _ASM_POWERPC_ISERIES_HV_CALL_SC_H */ diff --git a/include/asm-powerpc/iseries/hv_call_xm.h b/include/asm-powerpc/iseries/hv_call_xm.h deleted file mode 100644 index 392ac3f54df0..000000000000 --- a/include/asm-powerpc/iseries/hv_call_xm.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file contains the "hypervisor call" interface which is used to - * drive the hypervisor from SLIC. - */ -#ifndef _ASM_POWERPC_ISERIES_HV_CALL_XM_H -#define _ASM_POWERPC_ISERIES_HV_CALL_XM_H - -#include -#include - -#define HvCallXmGetTceTableParms HvCallXm + 0 -#define HvCallXmTestBus HvCallXm + 1 -#define HvCallXmConnectBusUnit HvCallXm + 2 -#define HvCallXmLoadTod HvCallXm + 8 -#define HvCallXmTestBusUnit HvCallXm + 9 -#define HvCallXmSetTce HvCallXm + 11 -#define HvCallXmSetTces HvCallXm + 13 - -static inline void HvCallXm_getTceTableParms(u64 cb) -{ - HvCall1(HvCallXmGetTceTableParms, cb); -} - -static inline u64 HvCallXm_setTce(u64 tceTableToken, u64 tceOffset, u64 tce) -{ - return HvCall3(HvCallXmSetTce, tceTableToken, tceOffset, tce); -} - -static inline u64 HvCallXm_setTces(u64 tceTableToken, u64 tceOffset, - u64 numTces, u64 tce1, u64 tce2, u64 tce3, u64 tce4) -{ - return HvCall7(HvCallXmSetTces, tceTableToken, tceOffset, numTces, - tce1, tce2, tce3, tce4); -} - -static inline u64 HvCallXm_testBus(u16 busNumber) -{ - return HvCall1(HvCallXmTestBus, busNumber); -} - -static inline u64 HvCallXm_testBusUnit(u16 busNumber, u8 subBusNumber, - u8 deviceId) -{ - return HvCall2(HvCallXmTestBusUnit, busNumber, - (subBusNumber << 8) | deviceId); -} - -static inline u64 HvCallXm_connectBusUnit(u16 busNumber, u8 subBusNumber, - u8 deviceId, u64 interruptToken) -{ - return HvCall5(HvCallXmConnectBusUnit, busNumber, - (subBusNumber << 8) | deviceId, interruptToken, 0, - 0 /* HvLpConfig::mapDsaToQueueIndex(HvLpDSA(busNumber, xBoard, xCard)) */); -} - -static inline u64 HvCallXm_loadTod(void) -{ - return HvCall0(HvCallXmLoadTod); -} - -#endif /* _ASM_POWERPC_ISERIES_HV_CALL_XM_H */ diff --git a/include/asm-powerpc/iseries/hv_lp_config.h b/include/asm-powerpc/iseries/hv_lp_config.h deleted file mode 100644 index a006fd1e4a2c..000000000000 --- a/include/asm-powerpc/iseries/hv_lp_config.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H -#define _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H - -/* - * This file contains the interface to the LPAR configuration data - * to determine which resources should be allocated to each partition. - */ - -#include -#include - -enum { - HvCallCfg_Cur = 0, - HvCallCfg_Init = 1, - HvCallCfg_Max = 2, - HvCallCfg_Min = 3 -}; - -#define HvCallCfgGetSystemPhysicalProcessors HvCallCfg + 6 -#define HvCallCfgGetPhysicalProcessors HvCallCfg + 7 -#define HvCallCfgGetMsChunks HvCallCfg + 9 -#define HvCallCfgGetSharedPoolIndex HvCallCfg + 20 -#define HvCallCfgGetSharedProcUnits HvCallCfg + 21 -#define HvCallCfgGetNumProcsInSharedPool HvCallCfg + 22 -#define HvCallCfgGetVirtualLanIndexMap HvCallCfg + 30 -#define HvCallCfgGetHostingLpIndex HvCallCfg + 32 - -extern HvLpIndex HvLpConfig_getLpIndex_outline(void); -extern HvLpIndex HvLpConfig_getLpIndex(void); -extern HvLpIndex HvLpConfig_getPrimaryLpIndex(void); - -static inline u64 HvLpConfig_getMsChunks(void) -{ - return HvCall2(HvCallCfgGetMsChunks, HvLpConfig_getLpIndex(), - HvCallCfg_Cur); -} - -static inline u64 HvLpConfig_getSystemPhysicalProcessors(void) -{ - return HvCall0(HvCallCfgGetSystemPhysicalProcessors); -} - -static inline u64 HvLpConfig_getNumProcsInSharedPool(HvLpSharedPoolIndex sPI) -{ - return (u16)HvCall1(HvCallCfgGetNumProcsInSharedPool, sPI); -} - -static inline u64 HvLpConfig_getPhysicalProcessors(void) -{ - return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(), - HvCallCfg_Cur); -} - -static inline HvLpSharedPoolIndex HvLpConfig_getSharedPoolIndex(void) -{ - return HvCall1(HvCallCfgGetSharedPoolIndex, HvLpConfig_getLpIndex()); -} - -static inline u64 HvLpConfig_getSharedProcUnits(void) -{ - return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(), - HvCallCfg_Cur); -} - -static inline u64 HvLpConfig_getMaxSharedProcUnits(void) -{ - return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(), - HvCallCfg_Max); -} - -static inline u64 HvLpConfig_getMaxPhysicalProcessors(void) -{ - return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(), - HvCallCfg_Max); -} - -static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMapForLp( - HvLpIndex lp) -{ - /* - * This is a new function in V5R1 so calls to this on older - * hypervisors will return -1 - */ - u64 retVal = HvCall1(HvCallCfgGetVirtualLanIndexMap, lp); - if (retVal == -1) - retVal = 0; - return retVal; -} - -static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMap(void) -{ - return HvLpConfig_getVirtualLanIndexMapForLp( - HvLpConfig_getLpIndex_outline()); -} - -static inline int HvLpConfig_doLpsCommunicateOnVirtualLan(HvLpIndex lp1, - HvLpIndex lp2) -{ - HvLpVirtualLanIndexMap virtualLanIndexMap1 = - HvLpConfig_getVirtualLanIndexMapForLp(lp1); - HvLpVirtualLanIndexMap virtualLanIndexMap2 = - HvLpConfig_getVirtualLanIndexMapForLp(lp2); - return ((virtualLanIndexMap1 & virtualLanIndexMap2) != 0); -} - -static inline HvLpIndex HvLpConfig_getHostingLpIndex(HvLpIndex lp) -{ - return HvCall1(HvCallCfgGetHostingLpIndex, lp); -} - -#endif /* _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H */ diff --git a/include/asm-powerpc/iseries/hv_lp_event.h b/include/asm-powerpc/iseries/hv_lp_event.h deleted file mode 100644 index 8f5da7d77202..000000000000 --- a/include/asm-powerpc/iseries/hv_lp_event.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* This file contains the class for HV events in the system. */ - -#ifndef _ASM_POWERPC_ISERIES_HV_LP_EVENT_H -#define _ASM_POWERPC_ISERIES_HV_LP_EVENT_H - -#include -#include -#include -#include - -/* - * HvLpEvent is the structure for Lp Event messages passed between - * partitions through PLIC. - */ - -struct HvLpEvent { - u8 flags; /* Event flags x00-x00 */ - u8 xType; /* Type of message x01-x01 */ - u16 xSubtype; /* Subtype for event x02-x03 */ - u8 xSourceLp; /* Source LP x04-x04 */ - u8 xTargetLp; /* Target LP x05-x05 */ - u8 xSizeMinus1; /* Size of Derived class - 1 x06-x06 */ - u8 xRc; /* RC for Ack flows x07-x07 */ - u16 xSourceInstanceId; /* Source sides instance id x08-x09 */ - u16 xTargetInstanceId; /* Target sides instance id x0A-x0B */ - union { - u32 xSubtypeData; /* Data usable by the subtype x0C-x0F */ - u16 xSubtypeDataShort[2]; /* Data as 2 shorts */ - u8 xSubtypeDataChar[4]; /* Data as 4 chars */ - } x; - - u64 xCorrelationToken; /* Unique value for source/type x10-x17 */ -}; - -typedef void (*LpEventHandler)(struct HvLpEvent *); - -/* Register a handler for an event type - returns 0 on success */ -extern int HvLpEvent_registerHandler(HvLpEvent_Type eventType, - LpEventHandler hdlr); - -/* - * Unregister a handler for an event type - * - * This call will sleep until the handler being removed is guaranteed to - * be no longer executing on any CPU. Do not call with locks held. - * - * returns 0 on success - * Unregister will fail if there are any paths open for the type - */ -extern int HvLpEvent_unregisterHandler(HvLpEvent_Type eventType); - -/* - * Open an Lp Event Path for an event type - * returns 0 on success - * openPath will fail if there is no handler registered for the event type. - * The lpIndex specified is the partition index for the target partition - * (for VirtualIo, VirtualLan and SessionMgr) other types specify zero) - */ -extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex); - -/* - * Close an Lp Event Path for a type and partition - * returns 0 on success - */ -extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex); - -#define HvLpEvent_Type_Hypervisor 0 -#define HvLpEvent_Type_MachineFac 1 -#define HvLpEvent_Type_SessionMgr 2 -#define HvLpEvent_Type_SpdIo 3 -#define HvLpEvent_Type_VirtualBus 4 -#define HvLpEvent_Type_PciIo 5 -#define HvLpEvent_Type_RioIo 6 -#define HvLpEvent_Type_VirtualLan 7 -#define HvLpEvent_Type_VirtualIo 8 -#define HvLpEvent_Type_NumTypes 9 - -#define HvLpEvent_Rc_Good 0 -#define HvLpEvent_Rc_BufferNotAvailable 1 -#define HvLpEvent_Rc_Cancelled 2 -#define HvLpEvent_Rc_GenericError 3 -#define HvLpEvent_Rc_InvalidAddress 4 -#define HvLpEvent_Rc_InvalidPartition 5 -#define HvLpEvent_Rc_InvalidSize 6 -#define HvLpEvent_Rc_InvalidSubtype 7 -#define HvLpEvent_Rc_InvalidSubtypeData 8 -#define HvLpEvent_Rc_InvalidType 9 -#define HvLpEvent_Rc_PartitionDead 10 -#define HvLpEvent_Rc_PathClosed 11 -#define HvLpEvent_Rc_SubtypeError 12 - -#define HvLpEvent_Function_Ack 0 -#define HvLpEvent_Function_Int 1 - -#define HvLpEvent_AckInd_NoAck 0 -#define HvLpEvent_AckInd_DoAck 1 - -#define HvLpEvent_AckType_ImmediateAck 0 -#define HvLpEvent_AckType_DeferredAck 1 - -#define HV_LP_EVENT_INT 0x01 -#define HV_LP_EVENT_DO_ACK 0x02 -#define HV_LP_EVENT_DEFERRED_ACK 0x04 -#define HV_LP_EVENT_VALID 0x80 - -#define HvLpDma_Direction_LocalToRemote 0 -#define HvLpDma_Direction_RemoteToLocal 1 - -#define HvLpDma_AddressType_TceIndex 0 -#define HvLpDma_AddressType_RealAddress 1 - -#define HvLpDma_Rc_Good 0 -#define HvLpDma_Rc_Error 1 -#define HvLpDma_Rc_PartitionDead 2 -#define HvLpDma_Rc_PathClosed 3 -#define HvLpDma_Rc_InvalidAddress 4 -#define HvLpDma_Rc_InvalidLength 5 - -static inline int hvlpevent_is_valid(struct HvLpEvent *h) -{ - return h->flags & HV_LP_EVENT_VALID; -} - -static inline void hvlpevent_invalidate(struct HvLpEvent *h) -{ - h->flags &= ~ HV_LP_EVENT_VALID; -} - -static inline int hvlpevent_is_int(struct HvLpEvent *h) -{ - return h->flags & HV_LP_EVENT_INT; -} - -static inline int hvlpevent_is_ack(struct HvLpEvent *h) -{ - return !hvlpevent_is_int(h); -} - -static inline int hvlpevent_need_ack(struct HvLpEvent *h) -{ - return h->flags & HV_LP_EVENT_DO_ACK; -} - -#endif /* _ASM_POWERPC_ISERIES_HV_LP_EVENT_H */ diff --git a/include/asm-powerpc/iseries/hv_types.h b/include/asm-powerpc/iseries/hv_types.h deleted file mode 100644 index c3e6d2a1d1c3..000000000000 --- a/include/asm-powerpc/iseries/hv_types.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_HV_TYPES_H -#define _ASM_POWERPC_ISERIES_HV_TYPES_H - -/* - * General typedefs for the hypervisor. - */ - -#include - -typedef u8 HvLpIndex; -typedef u16 HvLpInstanceId; -typedef u64 HvLpTOD; -typedef u64 HvLpSystemSerialNum; -typedef u8 HvLpDeviceSerialNum[12]; -typedef u16 HvLpSanHwSet; -typedef u16 HvLpBus; -typedef u16 HvLpBoard; -typedef u16 HvLpCard; -typedef u8 HvLpDeviceType[4]; -typedef u8 HvLpDeviceModel[3]; -typedef u64 HvIoToken; -typedef u8 HvLpName[8]; -typedef u32 HvIoId; -typedef u64 HvRealMemoryIndex; -typedef u32 HvLpIndexMap; /* Must hold HVMAXARCHITECTEDLPS bits!!! */ -typedef u16 HvLpVrmIndex; -typedef u32 HvXmGenerationId; -typedef u8 HvLpBusPool; -typedef u8 HvLpSharedPoolIndex; -typedef u16 HvLpSharedProcUnitsX100; -typedef u8 HvLpVirtualLanIndex; -typedef u16 HvLpVirtualLanIndexMap; /* Must hold HVMAXARCHITECTEDVIRTUALLANS bits!!! */ -typedef u16 HvBusNumber; /* Hypervisor Bus Number */ -typedef u8 HvSubBusNumber; /* Hypervisor SubBus Number */ -typedef u8 HvAgentId; /* Hypervisor DevFn */ - - -#define HVMAXARCHITECTEDLPS 32 -#define HVMAXARCHITECTEDVIRTUALLANS 16 -#define HVMAXARCHITECTEDVIRTUALDISKS 32 -#define HVMAXARCHITECTEDVIRTUALCDROMS 8 -#define HVMAXARCHITECTEDVIRTUALTAPES 8 -#define HVCHUNKSIZE (256 * 1024) -#define HVPAGESIZE (4 * 1024) -#define HVLPMINMEGSPRIMARY 256 -#define HVLPMINMEGSSECONDARY 64 -#define HVCHUNKSPERMEG 4 -#define HVPAGESPERMEG 256 -#define HVPAGESPERCHUNK 64 - -#define HvLpIndexInvalid ((HvLpIndex)0xff) - -/* - * Enums for the sub-components under PLIC - * Used in HvCall and HvPrimaryCall - */ -enum { - HvCallCompId = 0, - HvCallCpuCtlsCompId = 1, - HvCallCfgCompId = 2, - HvCallEventCompId = 3, - HvCallHptCompId = 4, - HvCallPciCompId = 5, - HvCallSlmCompId = 6, - HvCallSmCompId = 7, - HvCallSpdCompId = 8, - HvCallXmCompId = 9, - HvCallRioCompId = 10, - HvCallRsvd3CompId = 11, - HvCallRsvd2CompId = 12, - HvCallRsvd1CompId = 13, - HvCallMaxCompId = 14, - HvPrimaryCallCompId = 0, - HvPrimaryCallCfgCompId = 1, - HvPrimaryCallPciCompId = 2, - HvPrimaryCallSmCompId = 3, - HvPrimaryCallSpdCompId = 4, - HvPrimaryCallXmCompId = 5, - HvPrimaryCallRioCompId = 6, - HvPrimaryCallRsvd7CompId = 7, - HvPrimaryCallRsvd6CompId = 8, - HvPrimaryCallRsvd5CompId = 9, - HvPrimaryCallRsvd4CompId = 10, - HvPrimaryCallRsvd3CompId = 11, - HvPrimaryCallRsvd2CompId = 12, - HvPrimaryCallRsvd1CompId = 13, - HvPrimaryCallMaxCompId = HvCallMaxCompId -}; - -struct HvLpBufferList { - u64 addr; - u64 len; -}; - -#endif /* _ASM_POWERPC_ISERIES_HV_TYPES_H */ diff --git a/include/asm-powerpc/iseries/iommu.h b/include/asm-powerpc/iseries/iommu.h deleted file mode 100644 index c59ee7e4bed1..000000000000 --- a/include/asm-powerpc/iseries/iommu.h +++ /dev/null @@ -1,41 +0,0 @@ -#ifndef _ASM_POWERPC_ISERIES_IOMMU_H -#define _ASM_POWERPC_ISERIES_IOMMU_H - -/* - * Copyright (C) 2005 Stephen Rothwell, IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the: - * Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, - * Boston, MA 02111-1307 USA - */ - -struct pci_dev; -struct vio_dev; -struct device_node; -struct iommu_table; - -/* Creates table for an individual device node */ -extern void iommu_devnode_init_iSeries(struct pci_dev *pdev, - struct device_node *dn); - -/* Get table parameters from HV */ -extern void iommu_table_getparms_iSeries(unsigned long busno, - unsigned char slotno, unsigned char virtbus, - struct iommu_table *tbl); - -extern struct iommu_table *vio_build_iommu_table_iseries(struct vio_dev *dev); -extern void iommu_vio_init(void); - -#endif /* _ASM_POWERPC_ISERIES_IOMMU_H */ diff --git a/include/asm-powerpc/iseries/it_lp_queue.h b/include/asm-powerpc/iseries/it_lp_queue.h deleted file mode 100644 index 428278838821..000000000000 --- a/include/asm-powerpc/iseries/it_lp_queue.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H -#define _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H - -/* - * This control block defines the simple LP queue structure that is - * shared between the hypervisor (PLIC) and the OS in order to send - * events to an LP. - */ - -#include -#include - -#define IT_LP_MAX_QUEUES 8 - -#define IT_LP_NOT_USED 0 /* Queue will not be used by PLIC */ -#define IT_LP_DEDICATED_IO 1 /* Queue dedicated to IO processor specified */ -#define IT_LP_DEDICATED_LP 2 /* Queue dedicated to LP specified */ -#define IT_LP_SHARED 3 /* Queue shared for both IO and LP */ - -#define IT_LP_EVENT_STACK_SIZE 4096 -#define IT_LP_EVENT_MAX_SIZE 256 -#define IT_LP_EVENT_ALIGN 64 - -struct hvlpevent_queue { -/* - * The hq_current_event is the pointer to the next event stack entry - * that will become valid. The OS must peek at this entry to determine - * if it is valid. PLIC will set the valid indicator as the very last - * store into that entry. - * - * When the OS has completed processing of the event then it will mark - * the event as invalid so that PLIC knows it can store into that event - * location again. - * - * If the event stack fills and there are overflow events, then PLIC - * will set the hq_overflow_pending flag in which case the OS will - * have to fetch the additional LP events once they have drained the - * event stack. - * - * The first 16-bytes are known by both the OS and PLIC. The remainder - * of the cache line is for use by the OS. - */ - u8 hq_overflow_pending; /* 0x00 Overflow events are pending */ - u8 hq_status; /* 0x01 DedicatedIo or DedicatedLp or NotUsed */ - u16 hq_proc_index; /* 0x02 Logical Proc Index for correlation */ - u8 hq_reserved1[12]; /* 0x04 */ - char *hq_current_event; /* 0x10 */ - char *hq_last_event; /* 0x18 */ - char *hq_event_stack; /* 0x20 */ - u8 hq_index; /* 0x28 unique sequential index. */ - u8 hq_reserved2[3]; /* 0x29-2b */ - spinlock_t hq_lock; -}; - -extern struct hvlpevent_queue hvlpevent_queue; - -extern int hvlpevent_is_pending(void); -extern void process_hvlpevents(void); -extern void setup_hvlpevent_queue(void); - -#endif /* _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H */ diff --git a/include/asm-powerpc/iseries/lpar_map.h b/include/asm-powerpc/iseries/lpar_map.h deleted file mode 100644 index 5e9f3e128ee2..000000000000 --- a/include/asm-powerpc/iseries/lpar_map.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_LPAR_MAP_H -#define _ASM_POWERPC_ISERIES_LPAR_MAP_H - -#ifndef __ASSEMBLY__ - -#include - -#endif - -/* - * The iSeries hypervisor will set up mapping for one or more - * ESID/VSID pairs (in SLB/segment registers) and will set up - * mappings of one or more ranges of pages to VAs. - * We will have the hypervisor set up the ESID->VSID mapping - * for the four kernel segments (C-F). With shared processors, - * the hypervisor will clear all segment registers and reload - * these four whenever the processor is switched from one - * partition to another. - */ - -/* The Vsid and Esid identified below will be used by the hypervisor - * to set up a memory mapping for part of the load area before giving - * control to the Linux kernel. The load area is 64 MB, but this must - * not attempt to map the whole load area. The Hashed Page Table may - * need to be located within the load area (if the total partition size - * is 64 MB), but cannot be mapped. Typically, this should specify - * to map half (32 MB) of the load area. - * - * The hypervisor will set up page table entries for the number of - * pages specified. - * - * In 32-bit mode, the hypervisor will load all four of the - * segment registers (identified by the low-order four bits of the - * Esid field. In 64-bit mode, the hypervisor will load one SLB - * entry to map the Esid to the Vsid. -*/ - -#define HvEsidsToMap 2 -#define HvRangesToMap 1 - -/* Hypervisor initially maps 32MB of the load area */ -#define HvPagesToMap 8192 - -#ifndef __ASSEMBLY__ -struct LparMap { - u64 xNumberEsids; // Number of ESID/VSID pairs - u64 xNumberRanges; // Number of VA ranges to map - u64 xSegmentTableOffs; // Page number within load area of seg table - u64 xRsvd[5]; - struct { - u64 xKernelEsid; // Esid used to map kernel load - u64 xKernelVsid; // Vsid used to map kernel load - } xEsids[HvEsidsToMap]; - struct { - u64 xPages; // Number of pages to be mapped - u64 xOffset; // Offset from start of load area - u64 xVPN; // Virtual Page Number - } xRanges[HvRangesToMap]; -}; - -extern const struct LparMap xLparMap; - -#endif /* __ASSEMBLY__ */ - -/* the fixed address where the LparMap exists */ -#define LPARMAP_PHYS 0x7000 - -#endif /* _ASM_POWERPC_ISERIES_LPAR_MAP_H */ diff --git a/include/asm-powerpc/iseries/mf.h b/include/asm-powerpc/iseries/mf.h deleted file mode 100644 index eb851a9c9e5c..000000000000 --- a/include/asm-powerpc/iseries/mf.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2001 Troy D. Armstrong IBM Corporation - * Copyright (C) 2004 Stephen Rothwell IBM Corporation - * - * This modules exists as an interface between a Linux secondary partition - * running on an iSeries and the primary partition's Virtual Service - * Processor (VSP) object. The VSP has final authority over powering on/off - * all partitions in the iSeries. It also provides miscellaneous low-level - * machine facility type operations. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_MF_H -#define _ASM_POWERPC_ISERIES_MF_H - -#include - -#include -#include - -struct rtc_time; - -typedef void (*MFCompleteHandler)(void *clientToken, int returnCode); - -extern void mf_allocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type, - unsigned size, unsigned amount, MFCompleteHandler hdlr, - void *userToken); -extern void mf_deallocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type, - unsigned count, MFCompleteHandler hdlr, void *userToken); - -extern void mf_power_off(void); -extern void mf_reboot(char *cmd); - -extern void mf_display_src(u32 word); -extern void mf_display_progress(u16 value); - -extern void mf_init(void); - -#endif /* _ASM_POWERPC_ISERIES_MF_H */ diff --git a/include/asm-powerpc/iseries/vio.h b/include/asm-powerpc/iseries/vio.h deleted file mode 100644 index f9ac0d00b951..000000000000 --- a/include/asm-powerpc/iseries/vio.h +++ /dev/null @@ -1,265 +0,0 @@ -/* -*- linux-c -*- - * - * iSeries Virtual I/O Message Path header - * - * Authors: Dave Boutcher - * Ryan Arnold - * Colin Devilbiss - * - * (C) Copyright 2000 IBM Corporation - * - * This header file is used by the iSeries virtual I/O device - * drivers. It defines the interfaces to the common functions - * (implemented in drivers/char/viopath.h) as well as defining - * common functions and structures. Currently (at the time I - * wrote this comment) the iSeries virtual I/O device drivers - * that use this are - * drivers/block/viodasd.c - * drivers/char/viocons.c - * drivers/char/viotape.c - * drivers/cdrom/viocd.c - * - * The iSeries virtual ethernet support (veth.c) uses a whole - * different set of functions. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) anyu later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef _ASM_POWERPC_ISERIES_VIO_H -#define _ASM_POWERPC_ISERIES_VIO_H - -#include -#include - -/* - * iSeries virtual I/O events use the subtype field in - * HvLpEvent to figure out what kind of vio event is coming - * in. We use a table to route these, and this defines - * the maximum number of distinct subtypes - */ -#define VIO_MAX_SUBTYPES 8 - -#define VIOMAXBLOCKDMA 12 - -struct open_data { - u64 disk_size; - u16 max_disk; - u16 cylinders; - u16 tracks; - u16 sectors; - u16 bytes_per_sector; -}; - -struct rw_data { - u64 offset; - struct { - u32 token; - u32 reserved; - u64 len; - } dma_info[VIOMAXBLOCKDMA]; -}; - -struct vioblocklpevent { - struct HvLpEvent event; - u32 reserved; - u16 version; - u16 sub_result; - u16 disk; - u16 flags; - union { - struct open_data open_data; - struct rw_data rw_data; - u64 changed; - } u; -}; - -#define vioblockflags_ro 0x0001 - -enum vioblocksubtype { - vioblockopen = 0x0001, - vioblockclose = 0x0002, - vioblockread = 0x0003, - vioblockwrite = 0x0004, - vioblockflush = 0x0005, - vioblockcheck = 0x0007 -}; - -struct viocdlpevent { - struct HvLpEvent event; - u32 reserved; - u16 version; - u16 sub_result; - u16 disk; - u16 flags; - u32 token; - u64 offset; /* On open, max number of disks */ - u64 len; /* On open, size of the disk */ - u32 block_size; /* Only set on open */ - u32 media_size; /* Only set on open */ -}; - -enum viocdsubtype { - viocdopen = 0x0001, - viocdclose = 0x0002, - viocdread = 0x0003, - viocdwrite = 0x0004, - viocdlockdoor = 0x0005, - viocdgetinfo = 0x0006, - viocdcheck = 0x0007 -}; - -struct viotapelpevent { - struct HvLpEvent event; - u32 reserved; - u16 version; - u16 sub_type_result; - u16 tape; - u16 flags; - u32 token; - u64 len; - union { - struct { - u32 tape_op; - u32 count; - } op; - struct { - u32 type; - u32 resid; - u32 dsreg; - u32 gstat; - u32 erreg; - u32 file_no; - u32 block_no; - } get_status; - struct { - u32 block_no; - } get_pos; - } u; -}; - -enum viotapesubtype { - viotapeopen = 0x0001, - viotapeclose = 0x0002, - viotaperead = 0x0003, - viotapewrite = 0x0004, - viotapegetinfo = 0x0005, - viotapeop = 0x0006, - viotapegetpos = 0x0007, - viotapesetpos = 0x0008, - viotapegetstatus = 0x0009 -}; - -/* - * Each subtype can register a handler to process their events. - * The handler must have this interface. - */ -typedef void (vio_event_handler_t) (struct HvLpEvent * event); - -extern int viopath_open(HvLpIndex remoteLp, int subtype, int numReq); -extern int viopath_close(HvLpIndex remoteLp, int subtype, int numReq); -extern int vio_setHandler(int subtype, vio_event_handler_t * beh); -extern int vio_clearHandler(int subtype); -extern int viopath_isactive(HvLpIndex lp); -extern HvLpInstanceId viopath_sourceinst(HvLpIndex lp); -extern HvLpInstanceId viopath_targetinst(HvLpIndex lp); -extern void vio_set_hostlp(void); -extern void *vio_get_event_buffer(int subtype); -extern void vio_free_event_buffer(int subtype, void *buffer); - -extern struct vio_dev *vio_create_viodasd(u32 unit); - -extern HvLpIndex viopath_hostLp; -extern HvLpIndex viopath_ourLp; - -#define VIOCHAR_MAX_DATA 200 - -#define VIOMAJOR_SUBTYPE_MASK 0xff00 -#define VIOMINOR_SUBTYPE_MASK 0x00ff -#define VIOMAJOR_SUBTYPE_SHIFT 8 - -#define VIOVERSION 0x0101 - -/* - * This is the general structure for VIO errors; each module should have - * a table of them, and each table should be terminated by an entry of - * { 0, 0, NULL }. Then, to find a specific error message, a module - * should pass its local table and the return code. - */ -struct vio_error_entry { - u16 rc; - int errno; - const char *msg; -}; -extern const struct vio_error_entry *vio_lookup_rc( - const struct vio_error_entry *local_table, u16 rc); - -enum viosubtypes { - viomajorsubtype_monitor = 0x0100, - viomajorsubtype_blockio = 0x0200, - viomajorsubtype_chario = 0x0300, - viomajorsubtype_config = 0x0400, - viomajorsubtype_cdio = 0x0500, - viomajorsubtype_tape = 0x0600, - viomajorsubtype_scsi = 0x0700 -}; - -enum vioconfigsubtype { - vioconfigget = 0x0001, -}; - -enum viorc { - viorc_good = 0x0000, - viorc_noConnection = 0x0001, - viorc_noReceiver = 0x0002, - viorc_noBufferAvailable = 0x0003, - viorc_invalidMessageType = 0x0004, - viorc_invalidRange = 0x0201, - viorc_invalidToken = 0x0202, - viorc_DMAError = 0x0203, - viorc_useError = 0x0204, - viorc_releaseError = 0x0205, - viorc_invalidDisk = 0x0206, - viorc_openRejected = 0x0301 -}; - -/* - * The structure of the events that flow between us and OS/400 for chario - * events. You can't mess with this unless the OS/400 side changes too. - */ -struct viocharlpevent { - struct HvLpEvent event; - u32 reserved; - u16 version; - u16 subtype_result_code; - u8 virtual_device; - u8 len; - u8 data[VIOCHAR_MAX_DATA]; -}; - -#define VIOCHAR_WINDOW 10 - -enum viocharsubtype { - viocharopen = 0x0001, - viocharclose = 0x0002, - viochardata = 0x0003, - viocharack = 0x0004, - viocharconfig = 0x0005 -}; - -enum viochar_rc { - viochar_rc_ebusy = 1 -}; - -#endif /* _ASM_POWERPC_ISERIES_VIO_H */ diff --git a/include/asm-powerpc/kdebug.h b/include/asm-powerpc/kdebug.h deleted file mode 100644 index ae6d206728af..000000000000 --- a/include/asm-powerpc/kdebug.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _ASM_POWERPC_KDEBUG_H -#define _ASM_POWERPC_KDEBUG_H -#ifdef __KERNEL__ - -/* Grossly misnamed. */ -enum die_val { - DIE_OOPS = 1, - DIE_IABR_MATCH, - DIE_DABR_MATCH, - DIE_BPT, - DIE_SSTEP, -}; - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_KDEBUG_H */ diff --git a/include/asm-powerpc/kdump.h b/include/asm-powerpc/kdump.h deleted file mode 100644 index f6c93c716898..000000000000 --- a/include/asm-powerpc/kdump.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef _PPC64_KDUMP_H -#define _PPC64_KDUMP_H - -/* Kdump kernel runs at 32 MB, change at your peril. */ -#define KDUMP_KERNELBASE 0x2000000 - -/* How many bytes to reserve at zero for kdump. The reserve limit should - * be greater or equal to the trampoline's end address. - * Reserve to the end of the FWNMI area, see head_64.S */ -#define KDUMP_RESERVE_LIMIT 0x10000 /* 64K */ - -#ifdef CONFIG_CRASH_DUMP - -#define KDUMP_TRAMPOLINE_START 0x0100 -#define KDUMP_TRAMPOLINE_END 0x3000 - -#define KDUMP_MIN_TCE_ENTRIES 2048 - -#endif /* CONFIG_CRASH_DUMP */ - -#ifndef __ASSEMBLY__ -#ifdef CONFIG_CRASH_DUMP - -extern void reserve_kdump_trampoline(void); -extern void setup_kdump_trampoline(void); - -#else /* !CONFIG_CRASH_DUMP */ - -static inline void reserve_kdump_trampoline(void) { ; } -static inline void setup_kdump_trampoline(void) { ; } - -#endif /* CONFIG_CRASH_DUMP */ -#endif /* __ASSEMBLY__ */ - -#endif /* __PPC64_KDUMP_H */ diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h deleted file mode 100644 index acdcdc66f1b6..000000000000 --- a/include/asm-powerpc/kexec.h +++ /dev/null @@ -1,160 +0,0 @@ -#ifndef _ASM_POWERPC_KEXEC_H -#define _ASM_POWERPC_KEXEC_H -#ifdef __KERNEL__ - -/* - * Maximum page that is mapped directly into kernel memory. - * XXX: Since we copy virt we can use any page we allocate - */ -#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) - -/* - * Maximum address we can reach in physical address mode. - * XXX: I want to allow initrd in highmem. Otherwise set to rmo on LPAR. - */ -#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) - -/* Maximum address we can use for the control code buffer */ -#ifdef __powerpc64__ -#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL) -#else -/* TASK_SIZE, probably left over from use_mm ?? */ -#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE -#endif - -#define KEXEC_CONTROL_CODE_SIZE 4096 - -/* The native architecture */ -#ifdef __powerpc64__ -#define KEXEC_ARCH KEXEC_ARCH_PPC64 -#else -#define KEXEC_ARCH KEXEC_ARCH_PPC -#endif - -#ifndef __ASSEMBLY__ -#include - -typedef void (*crash_shutdown_t)(void); - -#ifdef CONFIG_KEXEC - -#ifdef __powerpc64__ -/* - * This function is responsible for capturing register states if coming - * via panic or invoking dump using sysrq-trigger. - */ -static inline void crash_setup_regs(struct pt_regs *newregs, - struct pt_regs *oldregs) -{ - if (oldregs) - memcpy(newregs, oldregs, sizeof(*newregs)); - else { - /* FIXME Merge this with xmon_save_regs ?? */ - unsigned long tmp1, tmp2; - __asm__ __volatile__ ( - "std 0,0(%2)\n" - "std 1,8(%2)\n" - "std 2,16(%2)\n" - "std 3,24(%2)\n" - "std 4,32(%2)\n" - "std 5,40(%2)\n" - "std 6,48(%2)\n" - "std 7,56(%2)\n" - "std 8,64(%2)\n" - "std 9,72(%2)\n" - "std 10,80(%2)\n" - "std 11,88(%2)\n" - "std 12,96(%2)\n" - "std 13,104(%2)\n" - "std 14,112(%2)\n" - "std 15,120(%2)\n" - "std 16,128(%2)\n" - "std 17,136(%2)\n" - "std 18,144(%2)\n" - "std 19,152(%2)\n" - "std 20,160(%2)\n" - "std 21,168(%2)\n" - "std 22,176(%2)\n" - "std 23,184(%2)\n" - "std 24,192(%2)\n" - "std 25,200(%2)\n" - "std 26,208(%2)\n" - "std 27,216(%2)\n" - "std 28,224(%2)\n" - "std 29,232(%2)\n" - "std 30,240(%2)\n" - "std 31,248(%2)\n" - "mfmsr %0\n" - "std %0, 264(%2)\n" - "mfctr %0\n" - "std %0, 280(%2)\n" - "mflr %0\n" - "std %0, 288(%2)\n" - "bl 1f\n" - "1: mflr %1\n" - "std %1, 256(%2)\n" - "mtlr %0\n" - "mfxer %0\n" - "std %0, 296(%2)\n" - : "=&r" (tmp1), "=&r" (tmp2) - : "b" (newregs) - : "memory"); - } -} -#else -/* - * Provide a dummy definition to avoid build failures. Will remain - * empty till crash dump support is enabled. - */ -static inline void crash_setup_regs(struct pt_regs *newregs, - struct pt_regs *oldregs) { } -#endif /* !__powerpc64 __ */ - -extern void kexec_smp_wait(void); /* get and clear naca physid, wait for - master to copy new code to 0 */ -extern int crashing_cpu; -extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)); -extern cpumask_t cpus_in_sr; -static inline int kexec_sr_activated(int cpu) -{ - return cpu_isset(cpu,cpus_in_sr); -} - -struct kimage; -struct pt_regs; -extern void default_machine_kexec(struct kimage *image); -extern int default_machine_kexec_prepare(struct kimage *image); -extern void default_machine_crash_shutdown(struct pt_regs *regs); -extern int crash_shutdown_register(crash_shutdown_t handler); -extern int crash_shutdown_unregister(crash_shutdown_t handler); - -extern void machine_kexec_simple(struct kimage *image); -extern void crash_kexec_secondary(struct pt_regs *regs); -extern int overlaps_crashkernel(unsigned long start, unsigned long size); -extern void reserve_crashkernel(void); - -#else /* !CONFIG_KEXEC */ -static inline int kexec_sr_activated(int cpu) { return 0; } -static inline void crash_kexec_secondary(struct pt_regs *regs) { } - -static inline int overlaps_crashkernel(unsigned long start, unsigned long size) -{ - return 0; -} - -static inline void reserve_crashkernel(void) { ; } - -static inline int crash_shutdown_register(crash_shutdown_t handler) -{ - return 0; -} - -static inline int crash_shutdown_unregister(crash_shutdown_t handler) -{ - return 0; -} - -#endif /* CONFIG_KEXEC */ -#endif /* ! __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_KEXEC_H */ diff --git a/include/asm-powerpc/keylargo.h b/include/asm-powerpc/keylargo.h deleted file mode 100644 index d8520ef121f9..000000000000 --- a/include/asm-powerpc/keylargo.h +++ /dev/null @@ -1,261 +0,0 @@ -#ifndef _ASM_POWERPC_KEYLARGO_H -#define _ASM_POWERPC_KEYLARGO_H -#ifdef __KERNEL__ -/* - * keylargo.h: definitions for using the "KeyLargo" I/O controller chip. - * - */ - -/* "Pangea" chipset has keylargo device-id 0x25 while core99 - * has device-id 0x22. The rev. of the pangea one is 0, so we - * fake an artificial rev. in keylargo_rev by oring 0x100 - */ -#define KL_PANGEA_REV 0x100 - -/* offset from base for feature control registers */ -#define KEYLARGO_MBCR 0x34 /* KL Only, Media bay control/status */ -#define KEYLARGO_FCR0 0x38 -#define KEYLARGO_FCR1 0x3c -#define KEYLARGO_FCR2 0x40 -#define KEYLARGO_FCR3 0x44 -#define KEYLARGO_FCR4 0x48 -#define KEYLARGO_FCR5 0x4c /* Pangea only */ - -/* K2 aditional FCRs */ -#define K2_FCR6 0x34 -#define K2_FCR7 0x30 -#define K2_FCR8 0x2c -#define K2_FCR9 0x28 -#define K2_FCR10 0x24 - -/* GPIO registers */ -#define KEYLARGO_GPIO_LEVELS0 0x50 -#define KEYLARGO_GPIO_LEVELS1 0x54 -#define KEYLARGO_GPIO_EXTINT_0 0x58 -#define KEYLARGO_GPIO_EXTINT_CNT 18 -#define KEYLARGO_GPIO_0 0x6A -#define KEYLARGO_GPIO_CNT 17 -#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE 0x80 -#define KEYLARGO_GPIO_OUTPUT_ENABLE 0x04 -#define KEYLARGO_GPIO_OUTOUT_DATA 0x01 -#define KEYLARGO_GPIO_INPUT_DATA 0x02 - -/* K2 does only extint GPIOs and does 51 of them */ -#define K2_GPIO_EXTINT_0 0x58 -#define K2_GPIO_EXTINT_CNT 51 - -/* Specific GPIO regs */ - -#define KL_GPIO_MODEM_RESET (KEYLARGO_GPIO_0+0x03) -#define KL_GPIO_MODEM_POWER (KEYLARGO_GPIO_0+0x02) /* Pangea */ - -#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05) - -/* Hrm... this one is only to be used on Pismo. It seeem to also - * control the timebase enable on other machines. Still to be - * experimented... --BenH. - */ -#define KL_GPIO_FW_CABLE_POWER (KEYLARGO_GPIO_0+0x09) -#define KL_GPIO_TB_ENABLE (KEYLARGO_GPIO_0+0x09) - -#define KL_GPIO_ETH_PHY_RESET (KEYLARGO_GPIO_0+0x10) - -#define KL_GPIO_EXTINT_CPU1 (KEYLARGO_GPIO_0+0x0a) -#define KL_GPIO_EXTINT_CPU1_ASSERT 0x04 -#define KL_GPIO_EXTINT_CPU1_RELEASE 0x38 - -#define KL_GPIO_RESET_CPU0 (KEYLARGO_GPIO_EXTINT_0+0x03) -#define KL_GPIO_RESET_CPU1 (KEYLARGO_GPIO_EXTINT_0+0x04) -#define KL_GPIO_RESET_CPU2 (KEYLARGO_GPIO_EXTINT_0+0x0f) -#define KL_GPIO_RESET_CPU3 (KEYLARGO_GPIO_EXTINT_0+0x10) - -#define KL_GPIO_PMU_MESSAGE_IRQ (KEYLARGO_GPIO_EXTINT_0+0x09) -#define KL_GPIO_PMU_MESSAGE_BIT KEYLARGO_GPIO_INPUT_DATA - -#define KL_GPIO_MEDIABAY_IRQ (KEYLARGO_GPIO_EXTINT_0+0x0e) - -#define KL_GPIO_AIRPORT_0 (KEYLARGO_GPIO_EXTINT_0+0x0a) -#define KL_GPIO_AIRPORT_1 (KEYLARGO_GPIO_EXTINT_0+0x0d) -#define KL_GPIO_AIRPORT_2 (KEYLARGO_GPIO_0+0x0d) -#define KL_GPIO_AIRPORT_3 (KEYLARGO_GPIO_0+0x0e) -#define KL_GPIO_AIRPORT_4 (KEYLARGO_GPIO_0+0x0f) - -/* - * Bits in feature control register. Those bits different for K2 are - * listed separately - */ -#define KL_MBCR_MB0_PCI_ENABLE 0x00000800 /* exist ? */ -#define KL_MBCR_MB0_IDE_ENABLE 0x00001000 -#define KL_MBCR_MB0_FLOPPY_ENABLE 0x00002000 /* exist ? */ -#define KL_MBCR_MB0_SOUND_ENABLE 0x00004000 /* hrm... */ -#define KL_MBCR_MB0_DEV_MASK 0x00007800 -#define KL_MBCR_MB0_DEV_POWER 0x00000400 -#define KL_MBCR_MB0_DEV_RESET 0x00000200 -#define KL_MBCR_MB0_ENABLE 0x00000100 -#define KL_MBCR_MB1_PCI_ENABLE 0x08000000 /* exist ? */ -#define KL_MBCR_MB1_IDE_ENABLE 0x10000000 -#define KL_MBCR_MB1_FLOPPY_ENABLE 0x20000000 /* exist ? */ -#define KL_MBCR_MB1_SOUND_ENABLE 0x40000000 /* hrm... */ -#define KL_MBCR_MB1_DEV_MASK 0x78000000 -#define KL_MBCR_MB1_DEV_POWER 0x04000000 -#define KL_MBCR_MB1_DEV_RESET 0x02000000 -#define KL_MBCR_MB1_ENABLE 0x01000000 - -#define KL0_SCC_B_INTF_ENABLE 0x00000001 /* (KL Only) */ -#define KL0_SCC_A_INTF_ENABLE 0x00000002 -#define KL0_SCC_SLOWPCLK 0x00000004 -#define KL0_SCC_RESET 0x00000008 -#define KL0_SCCA_ENABLE 0x00000010 -#define KL0_SCCB_ENABLE 0x00000020 -#define KL0_SCC_CELL_ENABLE 0x00000040 -#define KL0_IRDA_HIGH_BAND 0x00000100 /* (KL Only) */ -#define KL0_IRDA_SOURCE2_SEL 0x00000200 /* (KL Only) */ -#define KL0_IRDA_SOURCE1_SEL 0x00000400 /* (KL Only) */ -#define KL0_PG_USB0_PMI_ENABLE 0x00000400 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_RESET 0x00000800 /* (KL Only) */ -#define KL0_PG_USB0_REF_SUSPEND_SEL 0x00000800 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_DEFAULT1 0x00001000 /* (KL Only) */ -#define KL0_PG_USB0_REF_SUSPEND 0x00001000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_DEFAULT0 0x00002000 /* (KL Only) */ -#define KL0_PG_USB0_PAD_SUSPEND 0x00002000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_FAST_CONNECT 0x00004000 /* (KL Only) */ -#define KL0_PG_USB1_PMI_ENABLE 0x00004000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_ENABLE 0x00008000 /* (KL Only) */ -#define KL0_PG_USB1_REF_SUSPEND_SEL 0x00008000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_CLK32_ENABLE 0x00010000 /* (KL Only) */ -#define KL0_PG_USB1_REF_SUSPEND 0x00010000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_CLK19_ENABLE 0x00020000 /* (KL Only) */ -#define KL0_PG_USB1_PAD_SUSPEND 0x00020000 /* (Pangea/Intrepid Only) */ -#define KL0_USB0_PAD_SUSPEND0 0x00040000 -#define KL0_USB0_PAD_SUSPEND1 0x00080000 -#define KL0_USB0_CELL_ENABLE 0x00100000 -#define KL0_USB1_PAD_SUSPEND0 0x00400000 -#define KL0_USB1_PAD_SUSPEND1 0x00800000 -#define KL0_USB1_CELL_ENABLE 0x01000000 -#define KL0_USB_REF_SUSPEND 0x10000000 /* (KL Only) */ - -#define KL0_SERIAL_ENABLE (KL0_SCC_B_INTF_ENABLE | \ - KL0_SCC_SLOWPCLK | \ - KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE) - -#define KL1_USB2_PMI_ENABLE 0x00000001 /* Intrepid only */ -#define KL1_AUDIO_SEL_22MCLK 0x00000002 /* KL/Pangea only */ -#define KL1_USB2_REF_SUSPEND_SEL 0x00000002 /* Intrepid only */ -#define KL1_USB2_REF_SUSPEND 0x00000004 /* Intrepid only */ -#define KL1_AUDIO_CLK_ENABLE_BIT 0x00000008 /* KL/Pangea only */ -#define KL1_USB2_PAD_SUSPEND_SEL 0x00000008 /* Intrepid only */ -#define KL1_USB2_PAD_SUSPEND0 0x00000010 /* Intrepid only */ -#define KL1_AUDIO_CLK_OUT_ENABLE 0x00000020 /* KL/Pangea only */ -#define KL1_USB2_PAD_SUSPEND1 0x00000020 /* Intrepid only */ -#define KL1_AUDIO_CELL_ENABLE 0x00000040 /* KL/Pangea only */ -#define KL1_USB2_CELL_ENABLE 0x00000040 /* Intrepid only */ -#define KL1_AUDIO_CHOOSE 0x00000080 /* KL/Pangea only */ -#define KL1_I2S0_CHOOSE 0x00000200 /* KL Only */ -#define KL1_I2S0_CELL_ENABLE 0x00000400 -#define KL1_I2S0_CLK_ENABLE_BIT 0x00001000 -#define KL1_I2S0_ENABLE 0x00002000 -#define KL1_I2S1_CELL_ENABLE 0x00020000 -#define KL1_I2S1_CLK_ENABLE_BIT 0x00080000 -#define KL1_I2S1_ENABLE 0x00100000 -#define KL1_EIDE0_ENABLE 0x00800000 /* KL/Intrepid Only */ -#define KL1_EIDE0_RESET_N 0x01000000 /* KL/Intrepid Only */ -#define KL1_EIDE1_ENABLE 0x04000000 /* KL Only */ -#define KL1_EIDE1_RESET_N 0x08000000 /* KL Only */ -#define KL1_UIDE_ENABLE 0x20000000 /* KL/Pangea Only */ -#define KL1_UIDE_RESET_N 0x40000000 /* KL/Pangea Only */ - -#define KL2_IOBUS_ENABLE 0x00000002 -#define KL2_SLEEP_STATE_BIT 0x00000100 /* KL Only */ -#define KL2_PG_STOP_ALL_CLOCKS 0x00000100 /* Pangea Only */ -#define KL2_MPIC_ENABLE 0x00020000 -#define KL2_CARDSLOT_RESET 0x00040000 /* Pangea/Intrepid Only */ -#define KL2_ALT_DATA_OUT 0x02000000 /* KL Only ??? */ -#define KL2_MEM_IS_BIG 0x04000000 -#define KL2_CARDSEL_16 0x08000000 - -#define KL3_SHUTDOWN_PLL_TOTAL 0x00000001 /* KL/Pangea only */ -#define KL3_SHUTDOWN_PLLKW6 0x00000002 /* KL/Pangea only */ -#define KL3_IT_SHUTDOWN_PLL3 0x00000002 /* Intrepid only */ -#define KL3_SHUTDOWN_PLLKW4 0x00000004 /* KL/Pangea only */ -#define KL3_IT_SHUTDOWN_PLL2 0x00000004 /* Intrepid only */ -#define KL3_SHUTDOWN_PLLKW35 0x00000008 /* KL/Pangea only */ -#define KL3_IT_SHUTDOWN_PLL1 0x00000008 /* Intrepid only */ -#define KL3_SHUTDOWN_PLLKW12 0x00000010 /* KL Only */ -#define KL3_IT_ENABLE_PLL3_SHUTDOWN 0x00000010 /* Intrepid only */ -#define KL3_PLL_RESET 0x00000020 /* KL/Pangea only */ -#define KL3_IT_ENABLE_PLL2_SHUTDOWN 0x00000020 /* Intrepid only */ -#define KL3_IT_ENABLE_PLL1_SHUTDOWN 0x00000010 /* Intrepid only */ -#define KL3_SHUTDOWN_PLL2X 0x00000080 /* KL Only */ -#define KL3_CLK66_ENABLE 0x00000100 /* KL Only */ -#define KL3_CLK49_ENABLE 0x00000200 -#define KL3_CLK45_ENABLE 0x00000400 -#define KL3_CLK31_ENABLE 0x00000800 /* KL/Pangea only */ -#define KL3_TIMER_CLK18_ENABLE 0x00001000 -#define KL3_I2S1_CLK18_ENABLE 0x00002000 -#define KL3_I2S0_CLK18_ENABLE 0x00004000 -#define KL3_VIA_CLK16_ENABLE 0x00008000 /* KL/Pangea only */ -#define KL3_IT_VIA_CLK32_ENABLE 0x00008000 /* Intrepid only */ -#define KL3_STOPPING33_ENABLED 0x00080000 /* KL Only */ -#define KL3_PG_PLL_ENABLE_TEST 0x00080000 /* Pangea Only */ - -/* Intrepid USB bus 2, port 0,1 */ -#define KL3_IT_PORT_WAKEUP_ENABLE(p) (0x00080000 << ((p)<<3)) -#define KL3_IT_PORT_RESUME_WAKE_EN(p) (0x00040000 << ((p)<<3)) -#define KL3_IT_PORT_CONNECT_WAKE_EN(p) (0x00020000 << ((p)<<3)) -#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p) (0x00010000 << ((p)<<3)) -#define KL3_IT_PORT_RESUME_STAT(p) (0x00300000 << ((p)<<3)) -#define KL3_IT_PORT_CONNECT_STAT(p) (0x00200000 << ((p)<<3)) -#define KL3_IT_PORT_DISCONNECT_STAT(p) (0x00100000 << ((p)<<3)) - -/* Port 0,1 : bus 0, port 2,3 : bus 1 */ -#define KL4_PORT_WAKEUP_ENABLE(p) (0x00000008 << ((p)<<3)) -#define KL4_PORT_RESUME_WAKE_EN(p) (0x00000004 << ((p)<<3)) -#define KL4_PORT_CONNECT_WAKE_EN(p) (0x00000002 << ((p)<<3)) -#define KL4_PORT_DISCONNECT_WAKE_EN(p) (0x00000001 << ((p)<<3)) -#define KL4_PORT_RESUME_STAT(p) (0x00000040 << ((p)<<3)) -#define KL4_PORT_CONNECT_STAT(p) (0x00000020 << ((p)<<3)) -#define KL4_PORT_DISCONNECT_STAT(p) (0x00000010 << ((p)<<3)) - -/* Pangea and Intrepid only */ -#define KL5_VIA_USE_CLK31 0000000001 /* Pangea Only */ -#define KL5_SCC_USE_CLK31 0x00000002 /* Pangea Only */ -#define KL5_PWM_CLK32_EN 0x00000004 -#define KL5_CLK3_68_EN 0x00000010 -#define KL5_CLK32_EN 0x00000020 - - -/* K2 definitions */ -#define K2_FCR0_USB0_SWRESET 0x00200000 -#define K2_FCR0_USB1_SWRESET 0x02000000 -#define K2_FCR0_RING_PME_DISABLE 0x08000000 - -#define K2_FCR1_PCI1_BUS_RESET_N 0x00000010 -#define K2_FCR1_PCI1_SLEEP_RESET_EN 0x00000020 -#define K2_FCR1_I2S0_CELL_ENABLE 0x00000400 -#define K2_FCR1_I2S0_RESET 0x00000800 -#define K2_FCR1_I2S0_CLK_ENABLE_BIT 0x00001000 -#define K2_FCR1_I2S0_ENABLE 0x00002000 -#define K2_FCR1_PCI1_CLK_ENABLE 0x00004000 -#define K2_FCR1_FW_CLK_ENABLE 0x00008000 -#define K2_FCR1_FW_RESET_N 0x00010000 -#define K2_FCR1_I2S1_CELL_ENABLE 0x00020000 -#define K2_FCR1_I2S1_CLK_ENABLE_BIT 0x00080000 -#define K2_FCR1_I2S1_ENABLE 0x00100000 -#define K2_FCR1_GMAC_CLK_ENABLE 0x00400000 -#define K2_FCR1_GMAC_POWER_DOWN 0x00800000 -#define K2_FCR1_GMAC_RESET_N 0x01000000 -#define K2_FCR1_SATA_CLK_ENABLE 0x02000000 -#define K2_FCR1_SATA_POWER_DOWN 0x04000000 -#define K2_FCR1_SATA_RESET_N 0x08000000 -#define K2_FCR1_UATA_CLK_ENABLE 0x10000000 -#define K2_FCR1_UATA_RESET_N 0x40000000 -#define K2_FCR1_UATA_CHOOSE_CLK66 0x80000000 - -/* Shasta definitions */ -#define SH_FCR1_I2S2_CELL_ENABLE 0x00000010 -#define SH_FCR1_I2S2_CLK_ENABLE_BIT 0x00000040 -#define SH_FCR1_I2S2_ENABLE 0x00000080 -#define SH_FCR3_I2S2_CLK18_ENABLE 0x00008000 - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_KEYLARGO_H */ diff --git a/include/asm-powerpc/kgdb.h b/include/asm-powerpc/kgdb.h deleted file mode 100644 index 1399caf719ae..000000000000 --- a/include/asm-powerpc/kgdb.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * include/asm-powerpc/kgdb.h - * - * The PowerPC (32/64) specific defines / externs for KGDB. Based on - * the previous 32bit and 64bit specific files, which had the following - * copyrights: - * - * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com) - * PPC Mods (C) 2004 Tom Rini (trini@mvista.com) - * PPC Mods (C) 2003 John Whitney (john.whitney@timesys.com) - * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu) - * - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Author: Tom Rini - * - * 2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifdef __KERNEL__ -#ifndef __POWERPC_KGDB_H__ -#define __POWERPC_KGDB_H__ - -#ifndef __ASSEMBLY__ - -#define BREAK_INSTR_SIZE 4 -#define BUFMAX ((NUMREGBYTES * 2) + 512) -#define OUTBUFMAX ((NUMREGBYTES * 2) + 512) -static inline void arch_kgdb_breakpoint(void) -{ - asm(".long 0x7d821008"); /* twge r2, r2 */ -} -#define CACHE_FLUSH_IS_SAFE 1 - -/* The number bytes of registers we have to save depends on a few - * things. For 64bit we default to not including vector registers and - * vector state registers. */ -#ifdef CONFIG_PPC64 -/* - * 64 bit (8 byte) registers: - * 32 gpr, 32 fpr, nip, msr, link, ctr - * 32 bit (4 byte) registers: - * ccr, xer, fpscr - */ -#define NUMREGBYTES ((68 * 8) + (3 * 4)) -#define NUMCRITREGBYTES 184 -#else /* CONFIG_PPC32 */ -/* On non-E500 family PPC32 we determine the size by picking the last - * register we need, but on E500 we skip sections so we list what we - * need to store, and add it up. */ -#ifndef CONFIG_E500 -#define MAXREG (PT_FPSCR+1) -#else -/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/ -#define MAXREG ((32*2)+6+2+1) -#endif -#define NUMREGBYTES (MAXREG * sizeof(int)) -/* CR/LR, R1, R2, R13-R31 inclusive. */ -#define NUMCRITREGBYTES (23 * sizeof(int)) -#endif /* 32/64 */ -#endif /* !(__ASSEMBLY__) */ -#endif /* !__POWERPC_KGDB_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/kmap_types.h b/include/asm-powerpc/kmap_types.h deleted file mode 100644 index b6bac6f61c16..000000000000 --- a/include/asm-powerpc/kmap_types.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef _ASM_POWERPC_KMAP_TYPES_H -#define _ASM_POWERPC_KMAP_TYPES_H - -#ifdef __KERNEL__ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_PPC_SYNC_PAGE, - KM_PPC_SYNC_ICACHE, - KM_TYPE_NR -}; - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_KMAP_TYPES_H */ diff --git a/include/asm-powerpc/kprobes.h b/include/asm-powerpc/kprobes.h deleted file mode 100644 index d0e7701fa1f6..000000000000 --- a/include/asm-powerpc/kprobes.h +++ /dev/null @@ -1,118 +0,0 @@ -#ifndef _ASM_POWERPC_KPROBES_H -#define _ASM_POWERPC_KPROBES_H -#ifdef __KERNEL__ -/* - * Kernel Probes (KProbes) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) IBM Corporation, 2002, 2004 - * - * 2002-Oct Created by Vamsi Krishna S Kernel - * Probes initial implementation ( includes suggestions from - * Rusty Russell). - * 2004-Nov Modified for PPC64 by Ananth N Mavinakayanahalli - * - */ -#include -#include -#include - -#define __ARCH_WANT_KPROBES_INSN_SLOT - -struct pt_regs; -struct kprobe; - -typedef unsigned int kprobe_opcode_t; -#define BREAKPOINT_INSTRUCTION 0x7fe00008 /* trap */ -#define MAX_INSN_SIZE 1 - -#define IS_TW(instr) (((instr) & 0xfc0007fe) == 0x7c000008) -#define IS_TD(instr) (((instr) & 0xfc0007fe) == 0x7c000088) -#define IS_TDI(instr) (((instr) & 0xfc000000) == 0x08000000) -#define IS_TWI(instr) (((instr) & 0xfc000000) == 0x0c000000) - -#ifdef CONFIG_PPC64 -/* - * 64bit powerpc uses function descriptors. - * Handle cases where: - * - User passes a <.symbol> or - * - User passes a or - * - User passes a non-existant symbol, kallsyms_lookup_name - * returns 0. Don't deref the NULL pointer in that case - */ -#define kprobe_lookup_name(name, addr) \ -{ \ - addr = (kprobe_opcode_t *)kallsyms_lookup_name(name); \ - if (addr) { \ - char *colon; \ - if ((colon = strchr(name, ':')) != NULL) { \ - colon++; \ - if (*colon != '\0' && *colon != '.') \ - addr = *(kprobe_opcode_t **)addr; \ - } else if (name[0] != '.') \ - addr = *(kprobe_opcode_t **)addr; \ - } else { \ - char dot_name[KSYM_NAME_LEN]; \ - dot_name[0] = '.'; \ - dot_name[1] = '\0'; \ - strncat(dot_name, name, KSYM_NAME_LEN - 2); \ - addr = (kprobe_opcode_t *)kallsyms_lookup_name(dot_name); \ - } \ -} - -#define is_trap(instr) (IS_TW(instr) || IS_TD(instr) || \ - IS_TWI(instr) || IS_TDI(instr)) -#else -/* Use stock kprobe_lookup_name since ppc32 doesn't use function descriptors */ -#define is_trap(instr) (IS_TW(instr) || IS_TWI(instr)) -#endif - -#define flush_insn_slot(p) do { } while (0) -#define kretprobe_blacklist_size 0 - -void kretprobe_trampoline(void); -extern void arch_remove_kprobe(struct kprobe *p); - -/* Architecture specific copy of original instruction */ -struct arch_specific_insn { - /* copy of original instruction */ - kprobe_opcode_t *insn; - /* - * Set in kprobes code, initially to 0. If the instruction can be - * eumulated, this is set to 1, if not, to -1. - */ - int boostable; -}; - -struct prev_kprobe { - struct kprobe *kp; - unsigned long status; - unsigned long saved_msr; -}; - -/* per-cpu kprobe control block */ -struct kprobe_ctlblk { - unsigned long kprobe_status; - unsigned long kprobe_saved_msr; - struct pt_regs jprobe_saved_regs; - struct prev_kprobe prev_kprobe; -}; - -extern int kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data); -extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr); -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_KPROBES_H */ diff --git a/include/asm-powerpc/kvm.h b/include/asm-powerpc/kvm.h deleted file mode 100644 index f993e4198d5c..000000000000 --- a/include/asm-powerpc/kvm.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - * - * Copyright IBM Corp. 2007 - * - * Authors: Hollis Blanchard - */ - -#ifndef __LINUX_KVM_POWERPC_H -#define __LINUX_KVM_POWERPC_H - -#include - -struct kvm_regs { - __u64 pc; - __u64 cr; - __u64 ctr; - __u64 lr; - __u64 xer; - __u64 msr; - __u64 srr0; - __u64 srr1; - __u64 pid; - - __u64 sprg0; - __u64 sprg1; - __u64 sprg2; - __u64 sprg3; - __u64 sprg4; - __u64 sprg5; - __u64 sprg6; - __u64 sprg7; - - __u64 gpr[32]; -}; - -struct kvm_sregs { -}; - -struct kvm_fpu { - __u64 fpr[32]; -}; - -#endif /* __LINUX_KVM_POWERPC_H */ diff --git a/include/asm-powerpc/kvm_asm.h b/include/asm-powerpc/kvm_asm.h deleted file mode 100644 index 2197764796d9..000000000000 --- a/include/asm-powerpc/kvm_asm.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - * - * Copyright IBM Corp. 2008 - * - * Authors: Hollis Blanchard - */ - -#ifndef __POWERPC_KVM_ASM_H__ -#define __POWERPC_KVM_ASM_H__ - -/* IVPR must be 64KiB-aligned. */ -#define VCPU_SIZE_ORDER 4 -#define VCPU_SIZE_LOG (VCPU_SIZE_ORDER + 12) -#define VCPU_TLB_PGSZ PPC44x_TLB_64K -#define VCPU_SIZE_BYTES (1< - */ - -#ifndef __POWERPC_KVM_HOST_H__ -#define __POWERPC_KVM_HOST_H__ - -#include -#include -#include -#include -#include - -#define KVM_MAX_VCPUS 1 -#define KVM_MEMORY_SLOTS 32 -/* memory slots that does not exposed to userspace */ -#define KVM_PRIVATE_MEM_SLOTS 4 - -#define KVM_COALESCED_MMIO_PAGE_OFFSET 1 - -/* We don't currently support large pages. */ -#define KVM_PAGES_PER_HPAGE (1<<31) - -struct kvm; -struct kvm_run; -struct kvm_vcpu; - -struct kvm_vm_stat { - u32 remote_tlb_flush; -}; - -struct kvm_vcpu_stat { - u32 sum_exits; - u32 mmio_exits; - u32 dcr_exits; - u32 signal_exits; - u32 light_exits; - /* Account for special types of light exits: */ - u32 itlb_real_miss_exits; - u32 itlb_virt_miss_exits; - u32 dtlb_real_miss_exits; - u32 dtlb_virt_miss_exits; - u32 syscall_exits; - u32 isi_exits; - u32 dsi_exits; - u32 emulated_inst_exits; - u32 dec_exits; - u32 ext_intr_exits; - u32 halt_wakeup; -}; - -struct tlbe { - u32 tid; /* Only the low 8 bits are used. */ - u32 word0; - u32 word1; - u32 word2; -}; - -struct kvm_arch { -}; - -struct kvm_vcpu_arch { - /* Unmodified copy of the guest's TLB. */ - struct tlbe guest_tlb[PPC44x_TLB_SIZE]; - /* TLB that's actually used when the guest is running. */ - struct tlbe shadow_tlb[PPC44x_TLB_SIZE]; - /* Pages which are referenced in the shadow TLB. */ - struct page *shadow_pages[PPC44x_TLB_SIZE]; - /* Copy of the host's TLB. */ - struct tlbe host_tlb[PPC44x_TLB_SIZE]; - - u32 host_stack; - u32 host_pid; - - u64 fpr[32]; - u32 gpr[32]; - - u32 pc; - u32 cr; - u32 ctr; - u32 lr; - u32 xer; - - u32 msr; - u32 mmucr; - u32 sprg0; - u32 sprg1; - u32 sprg2; - u32 sprg3; - u32 sprg4; - u32 sprg5; - u32 sprg6; - u32 sprg7; - u32 srr0; - u32 srr1; - u32 csrr0; - u32 csrr1; - u32 dsrr0; - u32 dsrr1; - u32 dear; - u32 esr; - u32 dec; - u32 decar; - u32 tbl; - u32 tbu; - u32 tcr; - u32 tsr; - u32 ivor[16]; - u32 ivpr; - u32 pir; - u32 pid; - u32 pvr; - u32 ccr0; - u32 ccr1; - u32 dbcr0; - u32 dbcr1; - - u32 last_inst; - u32 fault_dear; - u32 fault_esr; - gpa_t paddr_accessed; - - u8 io_gpr; /* GPR used as IO source/target */ - u8 mmio_is_bigendian; - u8 dcr_needed; - u8 dcr_is_write; - - u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */ - - struct timer_list dec_timer; - unsigned long pending_exceptions; -}; - -struct kvm_guest_debug { - int enabled; - unsigned long bp[4]; - int singlestep; -}; - -#endif /* __POWERPC_KVM_HOST_H__ */ diff --git a/include/asm-powerpc/kvm_para.h b/include/asm-powerpc/kvm_para.h deleted file mode 100644 index 2d48f6a63d0b..000000000000 --- a/include/asm-powerpc/kvm_para.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - * - * Copyright IBM Corp. 2008 - * - * Authors: Hollis Blanchard - */ - -#ifndef __POWERPC_KVM_PARA_H__ -#define __POWERPC_KVM_PARA_H__ - -#ifdef __KERNEL__ - -static inline int kvm_para_available(void) -{ - return 0; -} - -static inline unsigned int kvm_arch_para_features(void) -{ - return 0; -} - -#endif /* __KERNEL__ */ - -#endif /* __POWERPC_KVM_PARA_H__ */ diff --git a/include/asm-powerpc/kvm_ppc.h b/include/asm-powerpc/kvm_ppc.h deleted file mode 100644 index a8b068792260..000000000000 --- a/include/asm-powerpc/kvm_ppc.h +++ /dev/null @@ -1,95 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - * - * Copyright IBM Corp. 2008 - * - * Authors: Hollis Blanchard - */ - -#ifndef __POWERPC_KVM_PPC_H__ -#define __POWERPC_KVM_PPC_H__ - -/* This file exists just so we can dereference kvm_vcpu, avoiding nested header - * dependencies. */ - -#include -#include -#include -#include -#include - -struct kvm_tlb { - struct tlbe guest_tlb[PPC44x_TLB_SIZE]; - struct tlbe shadow_tlb[PPC44x_TLB_SIZE]; -}; - -enum emulation_result { - EMULATE_DONE, /* no further processing */ - EMULATE_DO_MMIO, /* kvm_run filled with MMIO request */ - EMULATE_DO_DCR, /* kvm_run filled with DCR request */ - EMULATE_FAIL, /* can't emulate this instruction */ -}; - -extern const unsigned char exception_priority[]; -extern const unsigned char priority_exception[]; - -extern int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu); -extern char kvmppc_handlers_start[]; -extern unsigned long kvmppc_handler_len; - -extern void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu); -extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu, - unsigned int rt, unsigned int bytes, - int is_bigendian); -extern int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu, - u32 val, unsigned int bytes, int is_bigendian); - -extern int kvmppc_emulate_instruction(struct kvm_run *run, - struct kvm_vcpu *vcpu); -extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu); - -extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, - u64 asid, u32 flags); -extern void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr, - gva_t eend, u32 asid); -extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode); - -extern void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu); - -static inline void kvmppc_queue_exception(struct kvm_vcpu *vcpu, int exception) -{ - unsigned int priority = exception_priority[exception]; - set_bit(priority, &vcpu->arch.pending_exceptions); -} - -static inline void kvmppc_clear_exception(struct kvm_vcpu *vcpu, int exception) -{ - unsigned int priority = exception_priority[exception]; - clear_bit(priority, &vcpu->arch.pending_exceptions); -} - -/* Helper function for "full" MSR writes. No need to call this if only EE is - * changing. */ -static inline void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr) -{ - if ((new_msr & MSR_PR) != (vcpu->arch.msr & MSR_PR)) - kvmppc_mmu_priv_switch(vcpu, new_msr & MSR_PR); - - vcpu->arch.msr = new_msr; - - if (vcpu->arch.msr & MSR_WE) - kvm_vcpu_block(vcpu); -} - -#endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/include/asm-powerpc/libata-portmap.h b/include/asm-powerpc/libata-portmap.h deleted file mode 100644 index 4d8518049f4d..000000000000 --- a/include/asm-powerpc/libata-portmap.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H -#define __ASM_POWERPC_LIBATA_PORTMAP_H - -#define ATA_PRIMARY_CMD 0x1F0 -#define ATA_PRIMARY_CTL 0x3F6 -#define ATA_PRIMARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 0) - -#define ATA_SECONDARY_CMD 0x170 -#define ATA_SECONDARY_CTL 0x376 -#define ATA_SECONDARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 1) - -#endif diff --git a/include/asm-powerpc/linkage.h b/include/asm-powerpc/linkage.h deleted file mode 100644 index e1c4ac1cc4ba..000000000000 --- a/include/asm-powerpc/linkage.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_POWERPC_LINKAGE_H -#define _ASM_POWERPC_LINKAGE_H - -/* Nothing to see here... */ - -#endif /* _ASM_POWERPC_LINKAGE_H */ diff --git a/include/asm-powerpc/lmb.h b/include/asm-powerpc/lmb.h deleted file mode 100644 index 6f5fdf0a19ae..000000000000 --- a/include/asm-powerpc/lmb.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _ASM_POWERPC_LMB_H -#define _ASM_POWERPC_LMB_H - -#include - -#define LMB_DBG(fmt...) udbg_printf(fmt) - -#ifdef CONFIG_PPC32 -extern phys_addr_t lowmem_end_addr; -#define LMB_REAL_LIMIT lowmem_end_addr -#else -#define LMB_REAL_LIMIT 0 -#endif - -#endif /* _ASM_POWERPC_LMB_H */ diff --git a/include/asm-powerpc/local.h b/include/asm-powerpc/local.h deleted file mode 100644 index 612d83276653..000000000000 --- a/include/asm-powerpc/local.h +++ /dev/null @@ -1,200 +0,0 @@ -#ifndef _ARCH_POWERPC_LOCAL_H -#define _ARCH_POWERPC_LOCAL_H - -#include -#include - -typedef struct -{ - atomic_long_t a; -} local_t; - -#define LOCAL_INIT(i) { ATOMIC_LONG_INIT(i) } - -#define local_read(l) atomic_long_read(&(l)->a) -#define local_set(l,i) atomic_long_set(&(l)->a, (i)) - -#define local_add(i,l) atomic_long_add((i),(&(l)->a)) -#define local_sub(i,l) atomic_long_sub((i),(&(l)->a)) -#define local_inc(l) atomic_long_inc(&(l)->a) -#define local_dec(l) atomic_long_dec(&(l)->a) - -static __inline__ long local_add_return(long a, local_t *l) -{ - long t; - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%2 # local_add_return\n\ - add %0,%1,%0\n" - PPC405_ERR77(0,%2) - PPC_STLCX "%0,0,%2 \n\ - bne- 1b" - : "=&r" (t) - : "r" (a), "r" (&(l->a.counter)) - : "cc", "memory"); - - return t; -} - -#define local_add_negative(a, l) (local_add_return((a), (l)) < 0) - -static __inline__ long local_sub_return(long a, local_t *l) -{ - long t; - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%2 # local_sub_return\n\ - subf %0,%1,%0\n" - PPC405_ERR77(0,%2) - PPC_STLCX "%0,0,%2 \n\ - bne- 1b" - : "=&r" (t) - : "r" (a), "r" (&(l->a.counter)) - : "cc", "memory"); - - return t; -} - -static __inline__ long local_inc_return(local_t *l) -{ - long t; - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%1 # local_inc_return\n\ - addic %0,%0,1\n" - PPC405_ERR77(0,%1) - PPC_STLCX "%0,0,%1 \n\ - bne- 1b" - : "=&r" (t) - : "r" (&(l->a.counter)) - : "cc", "memory"); - - return t; -} - -/* - * local_inc_and_test - increment and test - * @l: pointer of type local_t - * - * Atomically increments @l by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define local_inc_and_test(l) (local_inc_return(l) == 0) - -static __inline__ long local_dec_return(local_t *l) -{ - long t; - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%1 # local_dec_return\n\ - addic %0,%0,-1\n" - PPC405_ERR77(0,%1) - PPC_STLCX "%0,0,%1\n\ - bne- 1b" - : "=&r" (t) - : "r" (&(l->a.counter)) - : "cc", "memory"); - - return t; -} - -#define local_cmpxchg(l, o, n) \ - (cmpxchg_local(&((l)->a.counter), (o), (n))) -#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n))) - -/** - * local_add_unless - add unless the number is a given value - * @l: pointer of type local_t - * @a: the amount to add to v... - * @u: ...unless v is equal to u. - * - * Atomically adds @a to @l, so long as it was not @u. - * Returns non-zero if @l was not @u, and zero otherwise. - */ -static __inline__ int local_add_unless(local_t *l, long a, long u) -{ - long t; - - __asm__ __volatile__ ( -"1:" PPC_LLARX "%0,0,%1 # local_add_unless\n\ - cmpw 0,%0,%3 \n\ - beq- 2f \n\ - add %0,%2,%0 \n" - PPC405_ERR77(0,%2) - PPC_STLCX "%0,0,%1 \n\ - bne- 1b \n" -" subf %0,%2,%0 \n\ -2:" - : "=&r" (t) - : "r" (&(l->a.counter)), "r" (a), "r" (u) - : "cc", "memory"); - - return t != u; -} - -#define local_inc_not_zero(l) local_add_unless((l), 1, 0) - -#define local_sub_and_test(a, l) (local_sub_return((a), (l)) == 0) -#define local_dec_and_test(l) (local_dec_return((l)) == 0) - -/* - * Atomically test *l and decrement if it is greater than 0. - * The function returns the old value of *l minus 1. - */ -static __inline__ long local_dec_if_positive(local_t *l) -{ - long t; - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%1 # local_dec_if_positive\n\ - cmpwi %0,1\n\ - addi %0,%0,-1\n\ - blt- 2f\n" - PPC405_ERR77(0,%1) - PPC_STLCX "%0,0,%1\n\ - bne- 1b" - "\n\ -2:" : "=&b" (t) - : "r" (&(l->a.counter)) - : "cc", "memory"); - - return t; -} - -/* Use these for per-cpu local_t variables: on some archs they are - * much more efficient than these naive implementations. Note they take - * a variable, not an address. - */ - -#define __local_inc(l) ((l)->a.counter++) -#define __local_dec(l) ((l)->a.counter++) -#define __local_add(i,l) ((l)->a.counter+=(i)) -#define __local_sub(i,l) ((l)->a.counter-=(i)) - -/* Need to disable preemption for the cpu local counters otherwise we could - still access a variable of a previous CPU in a non atomic way. */ -#define cpu_local_wrap_v(l) \ - ({ local_t res__; \ - preempt_disable(); \ - res__ = (l); \ - preempt_enable(); \ - res__; }) -#define cpu_local_wrap(l) \ - ({ preempt_disable(); \ - l; \ - preempt_enable(); }) \ - -#define cpu_local_read(l) cpu_local_wrap_v(local_read(&__get_cpu_var(l))) -#define cpu_local_set(l, i) cpu_local_wrap(local_set(&__get_cpu_var(l), (i))) -#define cpu_local_inc(l) cpu_local_wrap(local_inc(&__get_cpu_var(l))) -#define cpu_local_dec(l) cpu_local_wrap(local_dec(&__get_cpu_var(l))) -#define cpu_local_add(i, l) cpu_local_wrap(local_add((i), &__get_cpu_var(l))) -#define cpu_local_sub(i, l) cpu_local_wrap(local_sub((i), &__get_cpu_var(l))) - -#define __cpu_local_inc(l) cpu_local_inc(l) -#define __cpu_local_dec(l) cpu_local_dec(l) -#define __cpu_local_add(i, l) cpu_local_add((i), (l)) -#define __cpu_local_sub(i, l) cpu_local_sub((i), (l)) - -#endif /* _ARCH_POWERPC_LOCAL_H */ diff --git a/include/asm-powerpc/lppaca.h b/include/asm-powerpc/lppaca.h deleted file mode 100644 index 2fe268b10333..000000000000 --- a/include/asm-powerpc/lppaca.h +++ /dev/null @@ -1,159 +0,0 @@ -/* - * lppaca.h - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_LPPACA_H -#define _ASM_POWERPC_LPPACA_H -#ifdef __KERNEL__ - -//============================================================================= -// -// This control block contains the data that is shared between the -// hypervisor (PLIC) and the OS. -// -// -//---------------------------------------------------------------------------- -#include -#include -#include - -/* The Hypervisor barfs if the lppaca crosses a page boundary. A 1k - * alignment is sufficient to prevent this */ -struct lppaca { -//============================================================================= -// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data -// NOTE: The xDynXyz fields are fields that will be dynamically changed by -// PLIC when preparing to bring a processor online or when dispatching a -// virtual processor! -//============================================================================= - u32 desc; // Eye catcher 0xD397D781 x00-x03 - u16 size; // Size of this struct x04-x05 - u16 reserved1; // Reserved x06-x07 - u16 reserved2:14; // Reserved x08-x09 - u8 shared_proc:1; // Shared processor indicator ... - u8 secondary_thread:1; // Secondary thread indicator ... - volatile u8 dyn_proc_status:8; // Dynamic Status of this proc x0A-x0A - u8 secondary_thread_count; // Secondary thread count x0B-x0B - volatile u16 dyn_hv_phys_proc_index;// Dynamic HV Physical Proc Index0C-x0D - volatile u16 dyn_hv_log_proc_index;// Dynamic HV Logical Proc Indexx0E-x0F - u32 decr_val; // Value for Decr programming x10-x13 - u32 pmc_val; // Value for PMC regs x14-x17 - volatile u32 dyn_hw_node_id; // Dynamic Hardware Node id x18-x1B - volatile u32 dyn_hw_proc_id; // Dynamic Hardware Proc Id x1C-x1F - volatile u32 dyn_pir; // Dynamic ProcIdReg value x20-x23 - u32 dsei_data; // DSEI data x24-x27 - u64 sprg3; // SPRG3 value x28-x2F - u8 reserved3[80]; // Reserved x30-x7F - -//============================================================================= -// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data -//============================================================================= - // This Dword contains a byte for each type of interrupt that can occur. - // The IPI is a count while the others are just a binary 1 or 0. - union { - u64 any_int; - struct { - u16 reserved; // Reserved - cleared by #mpasmbl - u8 xirr_int; // Indicates xXirrValue is valid or Immed IO - u8 ipi_cnt; // IPI Count - u8 decr_int; // DECR interrupt occurred - u8 pdc_int; // PDC interrupt occurred - u8 quantum_int; // Interrupt quantum reached - u8 old_plic_deferred_ext_int; // Old PLIC has a deferred XIRR pending - } fields; - } int_dword; - - // Whenever any fields in this Dword are set then PLIC will defer the - // processing of external interrupts. Note that PLIC will store the - // XIRR directly into the xXirrValue field so that another XIRR will - // not be presented until this one clears. The layout of the low - // 4-bytes of this Dword is upto SLIC - PLIC just checks whether the - // entire Dword is zero or not. A non-zero value in the low order - // 2-bytes will result in SLIC being granted the highest thread - // priority upon return. A 0 will return to SLIC as medium priority. - u64 plic_defer_ints_area; // Entire Dword - - // Used to pass the real SRR0/1 from PLIC to SLIC as well as to - // pass the target SRR0/1 from SLIC to PLIC on a SetAsrAndRfid. - u64 saved_srr0; // Saved SRR0 x10-x17 - u64 saved_srr1; // Saved SRR1 x18-x1F - - // Used to pass parms from the OS to PLIC for SetAsrAndRfid - u64 saved_gpr3; // Saved GPR3 x20-x27 - u64 saved_gpr4; // Saved GPR4 x28-x2F - u64 saved_gpr5; // Saved GPR5 x30-x37 - - u8 reserved4; // Reserved x38-x38 - u8 donate_dedicated_cpu; // Donate dedicated CPU cycles x39-x39 - u8 fpregs_in_use; // FP regs in use x3A-x3A - u8 pmcregs_in_use; // PMC regs in use x3B-x3B - volatile u32 saved_decr; // Saved Decr Value x3C-x3F - volatile u64 emulated_time_base;// Emulated TB for this thread x40-x47 - volatile u64 cur_plic_latency; // Unaccounted PLIC latency x48-x4F - u64 tot_plic_latency; // Accumulated PLIC latency x50-x57 - u64 wait_state_cycles; // Wait cycles for this proc x58-x5F - u64 end_of_quantum; // TB at end of quantum x60-x67 - u64 pdc_saved_sprg1; // Saved SPRG1 for PMC int x68-x6F - u64 pdc_saved_srr0; // Saved SRR0 for PMC int x70-x77 - volatile u32 virtual_decr; // Virtual DECR for shared procsx78-x7B - u16 slb_count; // # of SLBs to maintain x7C-x7D - u8 idle; // Indicate OS is idle x7E - u8 vmxregs_in_use; // VMX registers in use x7F - - -//============================================================================= -// CACHE_LINE_3 0x0100 - 0x017F: This line is shared with other processors -//============================================================================= - // This is the yield_count. An "odd" value (low bit on) means that - // the processor is yielded (either because of an OS yield or a PLIC - // preempt). An even value implies that the processor is currently - // executing. - // NOTE: This value will ALWAYS be zero for dedicated processors and - // will NEVER be zero for shared processors (ie, initialized to a 1). - volatile u32 yield_count; // PLIC increments each dispatchx00-x03 - u32 reserved6; - volatile u64 cmo_faults; // CMO page fault count x08-x0F - volatile u64 cmo_fault_time; // CMO page fault time x10-x17 - u8 reserved7[104]; // Reserved x18-x7F - -//============================================================================= -// CACHE_LINE_4-5 0x0180 - 0x027F Contains PMC interrupt data -//============================================================================= - u8 pmc_save_area[256]; // PMC interrupt Area x00-xFF -} __attribute__((__aligned__(0x400))); - -extern struct lppaca lppaca[]; - -/* - * SLB shadow buffer structure as defined in the PAPR. The save_area - * contains adjacent ESID and VSID pairs for each shadowed SLB. The - * ESID is stored in the lower 64bits, then the VSID. - */ -struct slb_shadow { - u32 persistent; // Number of persistent SLBs x00-x03 - u32 buffer_length; // Total shadow buffer length x04-x07 - u64 reserved; // Alignment x08-x0f - struct { - u64 esid; - u64 vsid; - } save_area[SLB_NUM_BOLTED]; // x10-x40 -} ____cacheline_aligned; - -extern struct slb_shadow slb_shadow[]; - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_LPPACA_H */ diff --git a/include/asm-powerpc/lv1call.h b/include/asm-powerpc/lv1call.h deleted file mode 100644 index 81713acf7529..000000000000 --- a/include/asm-powerpc/lv1call.h +++ /dev/null @@ -1,348 +0,0 @@ -/* - * PS3 hvcall interface. - * - * Copyright (C) 2006 Sony Computer Entertainment Inc. - * Copyright 2006 Sony Corp. - * Copyright 2003, 2004 (c) MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if !defined(_ASM_POWERPC_LV1CALL_H) -#define _ASM_POWERPC_LV1CALL_H - -#if !defined(__ASSEMBLY__) - -#include - -/* lv1 call declaration macros */ - -#define LV1_1_IN_ARG_DECL u64 in_1 -#define LV1_2_IN_ARG_DECL LV1_1_IN_ARG_DECL, u64 in_2 -#define LV1_3_IN_ARG_DECL LV1_2_IN_ARG_DECL, u64 in_3 -#define LV1_4_IN_ARG_DECL LV1_3_IN_ARG_DECL, u64 in_4 -#define LV1_5_IN_ARG_DECL LV1_4_IN_ARG_DECL, u64 in_5 -#define LV1_6_IN_ARG_DECL LV1_5_IN_ARG_DECL, u64 in_6 -#define LV1_7_IN_ARG_DECL LV1_6_IN_ARG_DECL, u64 in_7 -#define LV1_8_IN_ARG_DECL LV1_7_IN_ARG_DECL, u64 in_8 -#define LV1_1_OUT_ARG_DECL u64 *out_1 -#define LV1_2_OUT_ARG_DECL LV1_1_OUT_ARG_DECL, u64 *out_2 -#define LV1_3_OUT_ARG_DECL LV1_2_OUT_ARG_DECL, u64 *out_3 -#define LV1_4_OUT_ARG_DECL LV1_3_OUT_ARG_DECL, u64 *out_4 -#define LV1_5_OUT_ARG_DECL LV1_4_OUT_ARG_DECL, u64 *out_5 -#define LV1_6_OUT_ARG_DECL LV1_5_OUT_ARG_DECL, u64 *out_6 -#define LV1_7_OUT_ARG_DECL LV1_6_OUT_ARG_DECL, u64 *out_7 - -#define LV1_0_IN_0_OUT_ARG_DECL void -#define LV1_1_IN_0_OUT_ARG_DECL LV1_1_IN_ARG_DECL -#define LV1_2_IN_0_OUT_ARG_DECL LV1_2_IN_ARG_DECL -#define LV1_3_IN_0_OUT_ARG_DECL LV1_3_IN_ARG_DECL -#define LV1_4_IN_0_OUT_ARG_DECL LV1_4_IN_ARG_DECL -#define LV1_5_IN_0_OUT_ARG_DECL LV1_5_IN_ARG_DECL -#define LV1_6_IN_0_OUT_ARG_DECL LV1_6_IN_ARG_DECL -#define LV1_7_IN_0_OUT_ARG_DECL LV1_7_IN_ARG_DECL - -#define LV1_0_IN_1_OUT_ARG_DECL LV1_1_OUT_ARG_DECL -#define LV1_1_IN_1_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_1_OUT_ARG_DECL -#define LV1_2_IN_1_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_1_OUT_ARG_DECL -#define LV1_3_IN_1_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_1_OUT_ARG_DECL -#define LV1_4_IN_1_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_1_OUT_ARG_DECL -#define LV1_5_IN_1_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_1_OUT_ARG_DECL -#define LV1_6_IN_1_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_1_OUT_ARG_DECL -#define LV1_7_IN_1_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_1_OUT_ARG_DECL -#define LV1_8_IN_1_OUT_ARG_DECL LV1_8_IN_ARG_DECL, LV1_1_OUT_ARG_DECL - -#define LV1_0_IN_2_OUT_ARG_DECL LV1_2_OUT_ARG_DECL -#define LV1_1_IN_2_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_2_OUT_ARG_DECL -#define LV1_2_IN_2_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_2_OUT_ARG_DECL -#define LV1_3_IN_2_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_2_OUT_ARG_DECL -#define LV1_4_IN_2_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_2_OUT_ARG_DECL -#define LV1_5_IN_2_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_2_OUT_ARG_DECL -#define LV1_6_IN_2_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_2_OUT_ARG_DECL -#define LV1_7_IN_2_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_2_OUT_ARG_DECL - -#define LV1_0_IN_3_OUT_ARG_DECL LV1_3_OUT_ARG_DECL -#define LV1_1_IN_3_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_3_OUT_ARG_DECL -#define LV1_2_IN_3_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_3_OUT_ARG_DECL -#define LV1_3_IN_3_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_3_OUT_ARG_DECL -#define LV1_4_IN_3_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_3_OUT_ARG_DECL -#define LV1_5_IN_3_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_3_OUT_ARG_DECL -#define LV1_6_IN_3_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_3_OUT_ARG_DECL -#define LV1_7_IN_3_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_3_OUT_ARG_DECL - -#define LV1_0_IN_4_OUT_ARG_DECL LV1_4_OUT_ARG_DECL -#define LV1_1_IN_4_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_4_OUT_ARG_DECL -#define LV1_2_IN_4_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_4_OUT_ARG_DECL -#define LV1_3_IN_4_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_4_OUT_ARG_DECL -#define LV1_4_IN_4_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_4_OUT_ARG_DECL -#define LV1_5_IN_4_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_4_OUT_ARG_DECL -#define LV1_6_IN_4_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_4_OUT_ARG_DECL -#define LV1_7_IN_4_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_4_OUT_ARG_DECL - -#define LV1_0_IN_5_OUT_ARG_DECL LV1_5_OUT_ARG_DECL -#define LV1_1_IN_5_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_5_OUT_ARG_DECL -#define LV1_2_IN_5_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_5_OUT_ARG_DECL -#define LV1_3_IN_5_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_5_OUT_ARG_DECL -#define LV1_4_IN_5_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_5_OUT_ARG_DECL -#define LV1_5_IN_5_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_5_OUT_ARG_DECL -#define LV1_6_IN_5_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_5_OUT_ARG_DECL -#define LV1_7_IN_5_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_5_OUT_ARG_DECL - -#define LV1_0_IN_6_OUT_ARG_DECL LV1_6_OUT_ARG_DECL -#define LV1_1_IN_6_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_6_OUT_ARG_DECL -#define LV1_2_IN_6_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_6_OUT_ARG_DECL -#define LV1_3_IN_6_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_6_OUT_ARG_DECL -#define LV1_4_IN_6_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_6_OUT_ARG_DECL -#define LV1_5_IN_6_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_6_OUT_ARG_DECL -#define LV1_6_IN_6_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_6_OUT_ARG_DECL -#define LV1_7_IN_6_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_6_OUT_ARG_DECL - -#define LV1_0_IN_7_OUT_ARG_DECL LV1_7_OUT_ARG_DECL -#define LV1_1_IN_7_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_7_OUT_ARG_DECL -#define LV1_2_IN_7_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_7_OUT_ARG_DECL -#define LV1_3_IN_7_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_7_OUT_ARG_DECL -#define LV1_4_IN_7_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_7_OUT_ARG_DECL -#define LV1_5_IN_7_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_7_OUT_ARG_DECL -#define LV1_6_IN_7_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_7_OUT_ARG_DECL -#define LV1_7_IN_7_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_7_OUT_ARG_DECL - -#define LV1_1_IN_ARGS in_1 -#define LV1_2_IN_ARGS LV1_1_IN_ARGS, in_2 -#define LV1_3_IN_ARGS LV1_2_IN_ARGS, in_3 -#define LV1_4_IN_ARGS LV1_3_IN_ARGS, in_4 -#define LV1_5_IN_ARGS LV1_4_IN_ARGS, in_5 -#define LV1_6_IN_ARGS LV1_5_IN_ARGS, in_6 -#define LV1_7_IN_ARGS LV1_6_IN_ARGS, in_7 -#define LV1_8_IN_ARGS LV1_7_IN_ARGS, in_8 - -#define LV1_1_OUT_ARGS out_1 -#define LV1_2_OUT_ARGS LV1_1_OUT_ARGS, out_2 -#define LV1_3_OUT_ARGS LV1_2_OUT_ARGS, out_3 -#define LV1_4_OUT_ARGS LV1_3_OUT_ARGS, out_4 -#define LV1_5_OUT_ARGS LV1_4_OUT_ARGS, out_5 -#define LV1_6_OUT_ARGS LV1_5_OUT_ARGS, out_6 -#define LV1_7_OUT_ARGS LV1_6_OUT_ARGS, out_7 - -#define LV1_0_IN_0_OUT_ARGS -#define LV1_1_IN_0_OUT_ARGS LV1_1_IN_ARGS -#define LV1_2_IN_0_OUT_ARGS LV1_2_IN_ARGS -#define LV1_3_IN_0_OUT_ARGS LV1_3_IN_ARGS -#define LV1_4_IN_0_OUT_ARGS LV1_4_IN_ARGS -#define LV1_5_IN_0_OUT_ARGS LV1_5_IN_ARGS -#define LV1_6_IN_0_OUT_ARGS LV1_6_IN_ARGS -#define LV1_7_IN_0_OUT_ARGS LV1_7_IN_ARGS - -#define LV1_0_IN_1_OUT_ARGS LV1_1_OUT_ARGS -#define LV1_1_IN_1_OUT_ARGS LV1_1_IN_ARGS, LV1_1_OUT_ARGS -#define LV1_2_IN_1_OUT_ARGS LV1_2_IN_ARGS, LV1_1_OUT_ARGS -#define LV1_3_IN_1_OUT_ARGS LV1_3_IN_ARGS, LV1_1_OUT_ARGS -#define LV1_4_IN_1_OUT_ARGS LV1_4_IN_ARGS, LV1_1_OUT_ARGS -#define LV1_5_IN_1_OUT_ARGS LV1_5_IN_ARGS, LV1_1_OUT_ARGS -#define LV1_6_IN_1_OUT_ARGS LV1_6_IN_ARGS, LV1_1_OUT_ARGS -#define LV1_7_IN_1_OUT_ARGS LV1_7_IN_ARGS, LV1_1_OUT_ARGS -#define LV1_8_IN_1_OUT_ARGS LV1_8_IN_ARGS, LV1_1_OUT_ARGS - -#define LV1_0_IN_2_OUT_ARGS LV1_2_OUT_ARGS -#define LV1_1_IN_2_OUT_ARGS LV1_1_IN_ARGS, LV1_2_OUT_ARGS -#define LV1_2_IN_2_OUT_ARGS LV1_2_IN_ARGS, LV1_2_OUT_ARGS -#define LV1_3_IN_2_OUT_ARGS LV1_3_IN_ARGS, LV1_2_OUT_ARGS -#define LV1_4_IN_2_OUT_ARGS LV1_4_IN_ARGS, LV1_2_OUT_ARGS -#define LV1_5_IN_2_OUT_ARGS LV1_5_IN_ARGS, LV1_2_OUT_ARGS -#define LV1_6_IN_2_OUT_ARGS LV1_6_IN_ARGS, LV1_2_OUT_ARGS -#define LV1_7_IN_2_OUT_ARGS LV1_7_IN_ARGS, LV1_2_OUT_ARGS - -#define LV1_0_IN_3_OUT_ARGS LV1_3_OUT_ARGS -#define LV1_1_IN_3_OUT_ARGS LV1_1_IN_ARGS, LV1_3_OUT_ARGS -#define LV1_2_IN_3_OUT_ARGS LV1_2_IN_ARGS, LV1_3_OUT_ARGS -#define LV1_3_IN_3_OUT_ARGS LV1_3_IN_ARGS, LV1_3_OUT_ARGS -#define LV1_4_IN_3_OUT_ARGS LV1_4_IN_ARGS, LV1_3_OUT_ARGS -#define LV1_5_IN_3_OUT_ARGS LV1_5_IN_ARGS, LV1_3_OUT_ARGS -#define LV1_6_IN_3_OUT_ARGS LV1_6_IN_ARGS, LV1_3_OUT_ARGS -#define LV1_7_IN_3_OUT_ARGS LV1_7_IN_ARGS, LV1_3_OUT_ARGS - -#define LV1_0_IN_4_OUT_ARGS LV1_4_OUT_ARGS -#define LV1_1_IN_4_OUT_ARGS LV1_1_IN_ARGS, LV1_4_OUT_ARGS -#define LV1_2_IN_4_OUT_ARGS LV1_2_IN_ARGS, LV1_4_OUT_ARGS -#define LV1_3_IN_4_OUT_ARGS LV1_3_IN_ARGS, LV1_4_OUT_ARGS -#define LV1_4_IN_4_OUT_ARGS LV1_4_IN_ARGS, LV1_4_OUT_ARGS -#define LV1_5_IN_4_OUT_ARGS LV1_5_IN_ARGS, LV1_4_OUT_ARGS -#define LV1_6_IN_4_OUT_ARGS LV1_6_IN_ARGS, LV1_4_OUT_ARGS -#define LV1_7_IN_4_OUT_ARGS LV1_7_IN_ARGS, LV1_4_OUT_ARGS - -#define LV1_0_IN_5_OUT_ARGS LV1_5_OUT_ARGS -#define LV1_1_IN_5_OUT_ARGS LV1_1_IN_ARGS, LV1_5_OUT_ARGS -#define LV1_2_IN_5_OUT_ARGS LV1_2_IN_ARGS, LV1_5_OUT_ARGS -#define LV1_3_IN_5_OUT_ARGS LV1_3_IN_ARGS, LV1_5_OUT_ARGS -#define LV1_4_IN_5_OUT_ARGS LV1_4_IN_ARGS, LV1_5_OUT_ARGS -#define LV1_5_IN_5_OUT_ARGS LV1_5_IN_ARGS, LV1_5_OUT_ARGS -#define LV1_6_IN_5_OUT_ARGS LV1_6_IN_ARGS, LV1_5_OUT_ARGS -#define LV1_7_IN_5_OUT_ARGS LV1_7_IN_ARGS, LV1_5_OUT_ARGS - -#define LV1_0_IN_6_OUT_ARGS LV1_6_OUT_ARGS -#define LV1_1_IN_6_OUT_ARGS LV1_1_IN_ARGS, LV1_6_OUT_ARGS -#define LV1_2_IN_6_OUT_ARGS LV1_2_IN_ARGS, LV1_6_OUT_ARGS -#define LV1_3_IN_6_OUT_ARGS LV1_3_IN_ARGS, LV1_6_OUT_ARGS -#define LV1_4_IN_6_OUT_ARGS LV1_4_IN_ARGS, LV1_6_OUT_ARGS -#define LV1_5_IN_6_OUT_ARGS LV1_5_IN_ARGS, LV1_6_OUT_ARGS -#define LV1_6_IN_6_OUT_ARGS LV1_6_IN_ARGS, LV1_6_OUT_ARGS -#define LV1_7_IN_6_OUT_ARGS LV1_7_IN_ARGS, LV1_6_OUT_ARGS - -#define LV1_0_IN_7_OUT_ARGS LV1_7_OUT_ARGS -#define LV1_1_IN_7_OUT_ARGS LV1_1_IN_ARGS, LV1_7_OUT_ARGS -#define LV1_2_IN_7_OUT_ARGS LV1_2_IN_ARGS, LV1_7_OUT_ARGS -#define LV1_3_IN_7_OUT_ARGS LV1_3_IN_ARGS, LV1_7_OUT_ARGS -#define LV1_4_IN_7_OUT_ARGS LV1_4_IN_ARGS, LV1_7_OUT_ARGS -#define LV1_5_IN_7_OUT_ARGS LV1_5_IN_ARGS, LV1_7_OUT_ARGS -#define LV1_6_IN_7_OUT_ARGS LV1_6_IN_ARGS, LV1_7_OUT_ARGS -#define LV1_7_IN_7_OUT_ARGS LV1_7_IN_ARGS, LV1_7_OUT_ARGS - -/* - * This LV1_CALL() macro is for use by callers. It expands into an - * inline call wrapper and an underscored HV call declaration. The - * wrapper can be used to instrument the lv1 call interface. The - * file lv1call.S defines its own LV1_CALL() macro to expand into - * the actual underscored call definition. - */ - -#if !defined(LV1_CALL) -#define LV1_CALL(name, in, out, num) \ - extern s64 _lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL); \ - static inline int lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL) \ - {return _lv1_##name(LV1_##in##_IN_##out##_OUT_ARGS);} -#endif - -#endif /* !defined(__ASSEMBLY__) */ - -/* lv1 call table */ - -LV1_CALL(allocate_memory, 4, 2, 0 ) -LV1_CALL(write_htab_entry, 4, 0, 1 ) -LV1_CALL(construct_virtual_address_space, 3, 2, 2 ) -LV1_CALL(invalidate_htab_entries, 5, 0, 3 ) -LV1_CALL(get_virtual_address_space_id_of_ppe, 1, 1, 4 ) -LV1_CALL(query_logical_partition_address_region_info, 1, 5, 6 ) -LV1_CALL(select_virtual_address_space, 1, 0, 7 ) -LV1_CALL(pause, 1, 0, 9 ) -LV1_CALL(destruct_virtual_address_space, 1, 0, 10 ) -LV1_CALL(configure_irq_state_bitmap, 3, 0, 11 ) -LV1_CALL(connect_irq_plug_ext, 5, 0, 12 ) -LV1_CALL(release_memory, 1, 0, 13 ) -LV1_CALL(put_iopte, 5, 0, 15 ) -LV1_CALL(disconnect_irq_plug_ext, 3, 0, 17 ) -LV1_CALL(construct_event_receive_port, 0, 1, 18 ) -LV1_CALL(destruct_event_receive_port, 1, 0, 19 ) -LV1_CALL(send_event_locally, 1, 0, 24 ) -LV1_CALL(end_of_interrupt, 1, 0, 27 ) -LV1_CALL(connect_irq_plug, 2, 0, 28 ) -LV1_CALL(disconnect_irq_plug, 1, 0, 29 ) -LV1_CALL(end_of_interrupt_ext, 3, 0, 30 ) -LV1_CALL(did_update_interrupt_mask, 2, 0, 31 ) -LV1_CALL(shutdown_logical_partition, 1, 0, 44 ) -LV1_CALL(destruct_logical_spe, 1, 0, 54 ) -LV1_CALL(construct_logical_spe, 7, 6, 57 ) -LV1_CALL(set_spe_interrupt_mask, 3, 0, 61 ) -LV1_CALL(set_spe_transition_notifier, 3, 0, 64 ) -LV1_CALL(disable_logical_spe, 2, 0, 65 ) -LV1_CALL(clear_spe_interrupt_status, 4, 0, 66 ) -LV1_CALL(get_spe_interrupt_status, 2, 1, 67 ) -LV1_CALL(get_logical_ppe_id, 0, 1, 69 ) -LV1_CALL(set_interrupt_mask, 5, 0, 73 ) -LV1_CALL(get_logical_partition_id, 0, 1, 74 ) -LV1_CALL(configure_execution_time_variable, 1, 0, 77 ) -LV1_CALL(get_spe_irq_outlet, 2, 1, 78 ) -LV1_CALL(set_spe_privilege_state_area_1_register, 3, 0, 79 ) -LV1_CALL(create_repository_node, 6, 0, 90 ) -LV1_CALL(get_repository_node_value, 5, 2, 91 ) -LV1_CALL(modify_repository_node_value, 6, 0, 92 ) -LV1_CALL(remove_repository_node, 4, 0, 93 ) -LV1_CALL(read_htab_entries, 2, 5, 95 ) -LV1_CALL(set_dabr, 2, 0, 96 ) -LV1_CALL(get_total_execution_time, 2, 1, 103 ) -LV1_CALL(allocate_io_segment, 3, 1, 116 ) -LV1_CALL(release_io_segment, 2, 0, 117 ) -LV1_CALL(construct_io_irq_outlet, 1, 1, 120 ) -LV1_CALL(destruct_io_irq_outlet, 1, 0, 121 ) -LV1_CALL(map_htab, 1, 1, 122 ) -LV1_CALL(unmap_htab, 1, 0, 123 ) -LV1_CALL(get_version_info, 0, 1, 127 ) -LV1_CALL(insert_htab_entry, 6, 3, 158 ) -LV1_CALL(read_virtual_uart, 3, 1, 162 ) -LV1_CALL(write_virtual_uart, 3, 1, 163 ) -LV1_CALL(set_virtual_uart_param, 3, 0, 164 ) -LV1_CALL(get_virtual_uart_param, 2, 1, 165 ) -LV1_CALL(configure_virtual_uart_irq, 1, 1, 166 ) -LV1_CALL(open_device, 3, 0, 170 ) -LV1_CALL(close_device, 2, 0, 171 ) -LV1_CALL(map_device_mmio_region, 5, 1, 172 ) -LV1_CALL(unmap_device_mmio_region, 3, 0, 173 ) -LV1_CALL(allocate_device_dma_region, 5, 1, 174 ) -LV1_CALL(free_device_dma_region, 3, 0, 175 ) -LV1_CALL(map_device_dma_region, 6, 0, 176 ) -LV1_CALL(unmap_device_dma_region, 4, 0, 177 ) -LV1_CALL(net_add_multicast_address, 4, 0, 185 ) -LV1_CALL(net_remove_multicast_address, 4, 0, 186 ) -LV1_CALL(net_start_tx_dma, 4, 0, 187 ) -LV1_CALL(net_stop_tx_dma, 3, 0, 188 ) -LV1_CALL(net_start_rx_dma, 4, 0, 189 ) -LV1_CALL(net_stop_rx_dma, 3, 0, 190 ) -LV1_CALL(net_set_interrupt_status_indicator, 4, 0, 191 ) -LV1_CALL(net_set_interrupt_mask, 4, 0, 193 ) -LV1_CALL(net_control, 6, 2, 194 ) -LV1_CALL(connect_interrupt_event_receive_port, 4, 0, 197 ) -LV1_CALL(disconnect_interrupt_event_receive_port, 4, 0, 198 ) -LV1_CALL(get_spe_all_interrupt_statuses, 1, 1, 199 ) -LV1_CALL(deconfigure_virtual_uart_irq, 0, 0, 202 ) -LV1_CALL(enable_logical_spe, 2, 0, 207 ) -LV1_CALL(gpu_open, 1, 0, 210 ) -LV1_CALL(gpu_close, 0, 0, 211 ) -LV1_CALL(gpu_device_map, 1, 2, 212 ) -LV1_CALL(gpu_device_unmap, 1, 0, 213 ) -LV1_CALL(gpu_memory_allocate, 5, 2, 214 ) -LV1_CALL(gpu_memory_free, 1, 0, 216 ) -LV1_CALL(gpu_context_allocate, 2, 5, 217 ) -LV1_CALL(gpu_context_free, 1, 0, 218 ) -LV1_CALL(gpu_context_iomap, 5, 0, 221 ) -LV1_CALL(gpu_context_attribute, 6, 0, 225 ) -LV1_CALL(gpu_context_intr, 1, 1, 227 ) -LV1_CALL(gpu_attribute, 5, 0, 228 ) -LV1_CALL(get_rtc, 0, 2, 232 ) -LV1_CALL(set_ppe_periodic_tracer_frequency, 1, 0, 240 ) -LV1_CALL(start_ppe_periodic_tracer, 5, 0, 241 ) -LV1_CALL(stop_ppe_periodic_tracer, 1, 1, 242 ) -LV1_CALL(storage_read, 6, 1, 245 ) -LV1_CALL(storage_write, 6, 1, 246 ) -LV1_CALL(storage_send_device_command, 6, 1, 248 ) -LV1_CALL(storage_get_async_status, 1, 2, 249 ) -LV1_CALL(storage_check_async_status, 2, 1, 254 ) -LV1_CALL(panic, 1, 0, 255 ) -LV1_CALL(construct_lpm, 6, 3, 140 ) -LV1_CALL(destruct_lpm, 1, 0, 141 ) -LV1_CALL(start_lpm, 1, 0, 142 ) -LV1_CALL(stop_lpm, 1, 1, 143 ) -LV1_CALL(copy_lpm_trace_buffer, 3, 1, 144 ) -LV1_CALL(add_lpm_event_bookmark, 5, 0, 145 ) -LV1_CALL(delete_lpm_event_bookmark, 3, 0, 146 ) -LV1_CALL(set_lpm_interrupt_mask, 3, 1, 147 ) -LV1_CALL(get_lpm_interrupt_status, 1, 1, 148 ) -LV1_CALL(set_lpm_general_control, 5, 2, 149 ) -LV1_CALL(set_lpm_interval, 3, 1, 150 ) -LV1_CALL(set_lpm_trigger_control, 3, 1, 151 ) -LV1_CALL(set_lpm_counter_control, 4, 1, 152 ) -LV1_CALL(set_lpm_group_control, 3, 1, 153 ) -LV1_CALL(set_lpm_debug_bus_control, 3, 1, 154 ) -LV1_CALL(set_lpm_counter, 5, 2, 155 ) -LV1_CALL(set_lpm_signal, 7, 0, 156 ) -LV1_CALL(set_lpm_spr_trigger, 2, 0, 157 ) - -#endif diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h deleted file mode 100644 index 893aafd87fde..000000000000 --- a/include/asm-powerpc/machdep.h +++ /dev/null @@ -1,365 +0,0 @@ -#ifndef _ASM_POWERPC_MACHDEP_H -#define _ASM_POWERPC_MACHDEP_H -#ifdef __KERNEL__ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include - -#include - -/* We export this macro for external modules like Alsa to know if - * ppc_md.feature_call is implemented or not - */ -#define CONFIG_PPC_HAS_FEATURE_CALLS - -struct pt_regs; -struct pci_bus; -struct device_node; -struct iommu_table; -struct rtc_time; -struct file; -struct pci_controller; -#ifdef CONFIG_KEXEC -struct kimage; -#endif - -#ifdef CONFIG_SMP -struct smp_ops_t { - void (*message_pass)(int target, int msg); - int (*probe)(void); - void (*kick_cpu)(int nr); - void (*setup_cpu)(int nr); - void (*take_timebase)(void); - void (*give_timebase)(void); - int (*cpu_enable)(unsigned int nr); - int (*cpu_disable)(void); - void (*cpu_die)(unsigned int nr); - int (*cpu_bootable)(unsigned int nr); -}; -#endif - -struct machdep_calls { - char *name; -#ifdef CONFIG_PPC64 - void (*hpte_invalidate)(unsigned long slot, - unsigned long va, - int psize, int ssize, - int local); - long (*hpte_updatepp)(unsigned long slot, - unsigned long newpp, - unsigned long va, - int psize, int ssize, - int local); - void (*hpte_updateboltedpp)(unsigned long newpp, - unsigned long ea, - int psize, int ssize); - long (*hpte_insert)(unsigned long hpte_group, - unsigned long va, - unsigned long prpn, - unsigned long rflags, - unsigned long vflags, - int psize, int ssize); - long (*hpte_remove)(unsigned long hpte_group); - void (*hpte_removebolted)(unsigned long ea, - int psize, int ssize); - void (*flush_hash_range)(unsigned long number, int local); - - /* special for kexec, to be called in real mode, linar mapping is - * destroyed as well */ - void (*hpte_clear_all)(void); - - int (*tce_build)(struct iommu_table *tbl, - long index, - long npages, - unsigned long uaddr, - enum dma_data_direction direction, - struct dma_attrs *attrs); - void (*tce_free)(struct iommu_table *tbl, - long index, - long npages); - unsigned long (*tce_get)(struct iommu_table *tbl, - long index); - void (*tce_flush)(struct iommu_table *tbl); - void (*pci_dma_dev_setup)(struct pci_dev *dev); - void (*pci_dma_bus_setup)(struct pci_bus *bus); - - void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size, - unsigned long flags); - void (*iounmap)(volatile void __iomem *token); - -#ifdef CONFIG_PM - void (*iommu_save)(void); - void (*iommu_restore)(void); -#endif -#endif /* CONFIG_PPC64 */ - - int (*probe)(void); - void (*setup_arch)(void); /* Optional, may be NULL */ - void (*init_early)(void); - /* Optional, may be NULL. */ - void (*show_cpuinfo)(struct seq_file *m); - void (*show_percpuinfo)(struct seq_file *m, int i); - - void (*init_IRQ)(void); - unsigned int (*get_irq)(void); -#ifdef CONFIG_KEXEC - void (*kexec_cpu_down)(int crash_shutdown, int secondary); -#endif - - /* PCI stuff */ - /* Called after scanning the bus, before allocating resources */ - void (*pcibios_fixup)(void); - int (*pci_probe_mode)(struct pci_bus *); - void (*pci_irq_fixup)(struct pci_dev *dev); - - /* To setup PHBs when using automatic OF platform driver for PCI */ - int (*pci_setup_phb)(struct pci_controller *host); - -#ifdef CONFIG_PCI_MSI - int (*msi_check_device)(struct pci_dev* dev, - int nvec, int type); - int (*setup_msi_irqs)(struct pci_dev *dev, - int nvec, int type); - void (*teardown_msi_irqs)(struct pci_dev *dev); -#endif - - void (*restart)(char *cmd); - void (*power_off)(void); - void (*halt)(void); - void (*panic)(char *str); - void (*cpu_die)(void); - - long (*time_init)(void); /* Optional, may be NULL */ - - int (*set_rtc_time)(struct rtc_time *); - void (*get_rtc_time)(struct rtc_time *); - unsigned long (*get_boot_time)(void); - unsigned char (*rtc_read_val)(int addr); - void (*rtc_write_val)(int addr, unsigned char val); - - void (*calibrate_decr)(void); - - void (*progress)(char *, unsigned short); - - /* Interface for platform error logging */ - void (*log_error)(char *buf, unsigned int err_type, int fatal); - - unsigned char (*nvram_read_val)(int addr); - void (*nvram_write_val)(int addr, unsigned char val); - ssize_t (*nvram_write)(char *buf, size_t count, loff_t *index); - ssize_t (*nvram_read)(char *buf, size_t count, loff_t *index); - ssize_t (*nvram_size)(void); - void (*nvram_sync)(void); - - /* Exception handlers */ - int (*system_reset_exception)(struct pt_regs *regs); - int (*machine_check_exception)(struct pt_regs *regs); - - /* Motherboard/chipset features. This is a kind of general purpose - * hook used to control some machine specific features (like reset - * lines, chip power control, etc...). - */ - long (*feature_call)(unsigned int feature, ...); - - /* Get legacy PCI/IDE interrupt mapping */ - int (*pci_get_legacy_ide_irq)(struct pci_dev *dev, int channel); - - /* Get access protection for /dev/mem */ - pgprot_t (*phys_mem_access_prot)(struct file *file, - unsigned long pfn, - unsigned long size, - pgprot_t vma_prot); - - /* Idle loop for this platform, leave empty for default idle loop */ - void (*idle_loop)(void); - - /* - * Function for waiting for work with reduced power in idle loop; - * called with interrupts disabled. - */ - void (*power_save)(void); - - /* Function to enable performance monitor counters for this - platform, called once per cpu. */ - void (*enable_pmcs)(void); - - /* Set DABR for this platform, leave empty for default implemenation */ - int (*set_dabr)(unsigned long dabr); - -#ifdef CONFIG_PPC32 /* XXX for now */ - /* A general init function, called by ppc_init in init/main.c. - May be NULL. */ - void (*init)(void); - - void (*kgdb_map_scc)(void); - - /* - * optional PCI "hooks" - */ - /* Called in indirect_* to avoid touching devices */ - int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char); - - /* Called at then very end of pcibios_init() */ - void (*pcibios_after_init)(void); - -#endif /* CONFIG_PPC32 */ - - /* Called after PPC generic resource fixup to perform - machine specific fixups */ - void (*pcibios_fixup_resources)(struct pci_dev *); - - /* Called for each PCI bus in the system when it's probed */ - void (*pcibios_fixup_bus)(struct pci_bus *); - - /* Called when pci_enable_device() is called. Returns 0 to - * allow assignment/enabling of the device. */ - int (*pcibios_enable_device_hook)(struct pci_dev *); - - /* Called to shutdown machine specific hardware not already controlled - * by other drivers. - */ - void (*machine_shutdown)(void); - -#ifdef CONFIG_KEXEC - /* Called to do the minimal shutdown needed to run a kexec'd kernel - * to run successfully. - * XXX Should we move this one out of kexec scope? - */ - void (*machine_crash_shutdown)(struct pt_regs *regs); - - /* Called to do what every setup is needed on image and the - * reboot code buffer. Returns 0 on success. - * Provide your own (maybe dummy) implementation if your platform - * claims to support kexec. - */ - int (*machine_kexec_prepare)(struct kimage *image); - - /* Called to handle any machine specific cleanup on image */ - void (*machine_kexec_cleanup)(struct kimage *image); - - /* Called to perform the _real_ kexec. - * Do NOT allocate memory or fail here. We are past the point of - * no return. - */ - void (*machine_kexec)(struct kimage *image); -#endif /* CONFIG_KEXEC */ - -#ifdef CONFIG_SUSPEND - /* These are called to disable and enable, respectively, IRQs when - * entering a suspend state. If NULL, then the generic versions - * will be called. The generic versions disable/enable the - * decrementer along with interrupts. - */ - void (*suspend_disable_irqs)(void); - void (*suspend_enable_irqs)(void); -#endif -}; - -extern void e500_idle(void); -extern void power4_idle(void); -extern void power4_cpu_offline_powersave(void); -extern void ppc6xx_idle(void); - -/* - * ppc_md contains a copy of the machine description structure for the - * current platform. machine_id contains the initial address where the - * description was found during boot. - */ -extern struct machdep_calls ppc_md; -extern struct machdep_calls *machine_id; - -#define __machine_desc __attribute__ ((__section__ (".machine.desc"))) - -#define define_machine(name) \ - extern struct machdep_calls mach_##name; \ - EXPORT_SYMBOL(mach_##name); \ - struct machdep_calls mach_##name __machine_desc = - -#define machine_is(name) \ - ({ \ - extern struct machdep_calls mach_##name \ - __attribute__((weak)); \ - machine_id == &mach_##name; \ - }) - -extern void probe_machine(void); - -extern char cmd_line[COMMAND_LINE_SIZE]; - -#ifdef CONFIG_PPC_PMAC -/* - * Power macintoshes have either a CUDA, PMU or SMU controlling - * system reset, power, NVRAM, RTC. - */ -typedef enum sys_ctrler_kind { - SYS_CTRLER_UNKNOWN = 0, - SYS_CTRLER_CUDA = 1, - SYS_CTRLER_PMU = 2, - SYS_CTRLER_SMU = 3, -} sys_ctrler_t; -extern sys_ctrler_t sys_ctrler; - -#endif /* CONFIG_PPC_PMAC */ - -extern void setup_pci_ptrs(void); - -#ifdef CONFIG_SMP -/* Poor default implementations */ -extern void __devinit smp_generic_give_timebase(void); -extern void __devinit smp_generic_take_timebase(void); -#endif /* CONFIG_SMP */ - - -/* Functions to produce codes on the leds. - * The SRC code should be unique for the message category and should - * be limited to the lower 24 bits (the upper 8 are set by these funcs), - * and (for boot & dump) should be sorted numerically in the order - * the events occur. - */ -/* Print a boot progress message. */ -void ppc64_boot_msg(unsigned int src, const char *msg); -/* Print a termination message (print only -- does not stop the kernel) */ -void ppc64_terminate_msg(unsigned int src, const char *msg); - -static inline void log_error(char *buf, unsigned int err_type, int fatal) -{ - if (ppc_md.log_error) - ppc_md.log_error(buf, err_type, fatal); -} - -#define __define_machine_initcall(mach,level,fn,id) \ - static int __init __machine_initcall_##mach##_##fn(void) { \ - if (machine_is(mach)) return fn(); \ - return 0; \ - } \ - __define_initcall(level,__machine_initcall_##mach##_##fn,id); - -#define machine_core_initcall(mach,fn) __define_machine_initcall(mach,"1",fn,1) -#define machine_core_initcall_sync(mach,fn) __define_machine_initcall(mach,"1s",fn,1s) -#define machine_postcore_initcall(mach,fn) __define_machine_initcall(mach,"2",fn,2) -#define machine_postcore_initcall_sync(mach,fn) __define_machine_initcall(mach,"2s",fn,2s) -#define machine_arch_initcall(mach,fn) __define_machine_initcall(mach,"3",fn,3) -#define machine_arch_initcall_sync(mach,fn) __define_machine_initcall(mach,"3s",fn,3s) -#define machine_subsys_initcall(mach,fn) __define_machine_initcall(mach,"4",fn,4) -#define machine_subsys_initcall_sync(mach,fn) __define_machine_initcall(mach,"4s",fn,4s) -#define machine_fs_initcall(mach,fn) __define_machine_initcall(mach,"5",fn,5) -#define machine_fs_initcall_sync(mach,fn) __define_machine_initcall(mach,"5s",fn,5s) -#define machine_rootfs_initcall(mach,fn) __define_machine_initcall(mach,"rootfs",fn,rootfs) -#define machine_device_initcall(mach,fn) __define_machine_initcall(mach,"6",fn,6) -#define machine_device_initcall_sync(mach,fn) __define_machine_initcall(mach,"6s",fn,6s) -#define machine_late_initcall(mach,fn) __define_machine_initcall(mach,"7",fn,7) -#define machine_late_initcall_sync(mach,fn) __define_machine_initcall(mach,"7s",fn,7s) - -void generic_suspend_disable_irqs(void); -void generic_suspend_enable_irqs(void); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_MACHDEP_H */ diff --git a/include/asm-powerpc/macio.h b/include/asm-powerpc/macio.h deleted file mode 100644 index 079c06eae446..000000000000 --- a/include/asm-powerpc/macio.h +++ /dev/null @@ -1,142 +0,0 @@ -#ifndef __MACIO_ASIC_H__ -#define __MACIO_ASIC_H__ -#ifdef __KERNEL__ - -#include - -extern struct bus_type macio_bus_type; - -/* MacIO device driver is defined later */ -struct macio_driver; -struct macio_chip; - -#define MACIO_DEV_COUNT_RESOURCES 8 -#define MACIO_DEV_COUNT_IRQS 8 - -/* - * the macio_bus structure is used to describe a "virtual" bus - * within a MacIO ASIC. It's typically provided by a macio_pci_asic - * PCI device, but could be provided differently as well (nubus - * machines using a fake OF tree). - * - * The pdev field can be NULL on non-PCI machines - */ -struct macio_bus -{ - struct macio_chip *chip; /* macio_chip (private use) */ - int index; /* macio chip index in system */ -#ifdef CONFIG_PCI - struct pci_dev *pdev; /* PCI device hosting this bus */ -#endif -}; - -/* - * the macio_dev structure is used to describe a device - * within an Apple MacIO ASIC. - */ -struct macio_dev -{ - struct macio_bus *bus; /* macio bus this device is on */ - struct macio_dev *media_bay; /* Device is part of a media bay */ - struct of_device ofdev; - int n_resources; - struct resource resource[MACIO_DEV_COUNT_RESOURCES]; - int n_interrupts; - struct resource interrupt[MACIO_DEV_COUNT_IRQS]; -}; -#define to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev) -#define of_to_macio_device(d) container_of(d, struct macio_dev, ofdev) - -extern struct macio_dev *macio_dev_get(struct macio_dev *dev); -extern void macio_dev_put(struct macio_dev *dev); - -/* - * Accessors to resources & interrupts and other device - * fields - */ - -static inline int macio_resource_count(struct macio_dev *dev) -{ - return dev->n_resources; -} - -static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no) -{ - return dev->resource[resource_no].start; -} - -static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no) -{ - return dev->resource[resource_no].end; -} - -static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no) -{ - struct resource *res = &dev->resource[resource_no]; - if (res->start == 0 || res->end == 0 || res->end < res->start) - return 0; - return res->end - res->start + 1; -} - -extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name); -extern void macio_release_resource(struct macio_dev *dev, int resource_no); -extern int macio_request_resources(struct macio_dev *dev, const char *name); -extern void macio_release_resources(struct macio_dev *dev); - -static inline int macio_irq_count(struct macio_dev *dev) -{ - return dev->n_interrupts; -} - -static inline int macio_irq(struct macio_dev *dev, int irq_no) -{ - return dev->interrupt[irq_no].start; -} - -static inline void macio_set_drvdata(struct macio_dev *dev, void *data) -{ - dev_set_drvdata(&dev->ofdev.dev, data); -} - -static inline void* macio_get_drvdata(struct macio_dev *dev) -{ - return dev_get_drvdata(&dev->ofdev.dev); -} - -static inline struct device_node *macio_get_of_node(struct macio_dev *mdev) -{ - return mdev->ofdev.node; -} - -#ifdef CONFIG_PCI -static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev) -{ - return mdev->bus->pdev; -} -#endif - -/* - * A driver for a mac-io chip based device - */ -struct macio_driver -{ - char *name; - struct of_device_id *match_table; - struct module *owner; - - int (*probe)(struct macio_dev* dev, const struct of_device_id *match); - int (*remove)(struct macio_dev* dev); - - int (*suspend)(struct macio_dev* dev, pm_message_t state); - int (*resume)(struct macio_dev* dev); - int (*shutdown)(struct macio_dev* dev); - - struct device_driver driver; -}; -#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver) - -extern int macio_register_driver(struct macio_driver *); -extern void macio_unregister_driver(struct macio_driver *); - -#endif /* __KERNEL__ */ -#endif /* __MACIO_ASIC_H__ */ diff --git a/include/asm-powerpc/mc146818rtc.h b/include/asm-powerpc/mc146818rtc.h deleted file mode 100644 index f2741c8b59a1..000000000000 --- a/include/asm-powerpc/mc146818rtc.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef _ASM_POWERPC_MC146818RTC_H -#define _ASM_POWERPC_MC146818RTC_H - -/* - * Machine dependent access functions for RTC registers. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifdef __KERNEL__ - -#include - -#ifndef RTC_PORT -#define RTC_PORT(x) (0x70 + (x)) -#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ -#endif - -/* - * The yet supported machines all access the RTC index register via - * an ISA port access but the way to access the date register differs ... - */ -#define CMOS_READ(addr) ({ \ -outb_p((addr),RTC_PORT(0)); \ -inb_p(RTC_PORT(1)); \ -}) -#define CMOS_WRITE(val, addr) ({ \ -outb_p((addr),RTC_PORT(0)); \ -outb_p((val),RTC_PORT(1)); \ -}) - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_MC146818RTC_H */ diff --git a/include/asm-powerpc/mediabay.h b/include/asm-powerpc/mediabay.h deleted file mode 100644 index b2efb3325808..000000000000 --- a/include/asm-powerpc/mediabay.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * mediabay.h: definitions for using the media bay - * on PowerBook 3400 and similar computers. - * - * Copyright (C) 1997 Paul Mackerras. - */ -#ifndef _PPC_MEDIABAY_H -#define _PPC_MEDIABAY_H - -#ifdef __KERNEL__ - -#define MB_FD 0 /* media bay contains floppy drive (automatic eject ?) */ -#define MB_FD1 1 /* media bay contains floppy drive (manual eject ?) */ -#define MB_SOUND 2 /* sound device ? */ -#define MB_CD 3 /* media bay contains ATA drive such as CD or ZIP */ -#define MB_PCI 5 /* media bay contains a PCI device */ -#define MB_POWER 6 /* media bay contains a Power device (???) */ -#define MB_NO 7 /* media bay contains nothing */ - -/* Number of bays in the machine or 0 */ -extern int media_bay_count; - -#ifdef CONFIG_BLK_DEV_IDE_PMAC -#include - -int check_media_bay_by_base(unsigned long base, int what); -/* called by IDE PMAC host driver to register IDE controller for media bay */ -int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base, - int irq, ide_hwif_t *hwif); - -int check_media_bay(struct device_node *which_bay, int what); - -#else - -static inline int check_media_bay(struct device_node *which_bay, int what) -{ - return -ENODEV; -} - -#endif - -#endif /* __KERNEL__ */ -#endif /* _PPC_MEDIABAY_H */ diff --git a/include/asm-powerpc/mman.h b/include/asm-powerpc/mman.h deleted file mode 100644 index 9209f755763e..000000000000 --- a/include/asm-powerpc/mman.h +++ /dev/null @@ -1,63 +0,0 @@ -#ifndef _ASM_POWERPC_MMAN_H -#define _ASM_POWERPC_MMAN_H - -#include - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define PROT_SAO 0x10 /* Strong Access Ordering */ - -#define MAP_RENAME MAP_ANONYMOUS /* In SunOS terminology */ -#define MAP_NORESERVE 0x40 /* don't reserve swap pages */ -#define MAP_LOCKED 0x80 - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ - -#define MCL_CURRENT 0x2000 /* lock all currently mapped pages */ -#define MCL_FUTURE 0x4000 /* lock all additions to address space */ - -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#ifdef __KERNEL__ -#ifdef CONFIG_PPC64 - -#include -#include - -/* - * This file is included by linux/mman.h, so we can't use cacl_vm_prot_bits() - * here. How important is the optimization? - */ -static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot) -{ - return (prot & PROT_SAO) ? VM_SAO : 0; -} -#define arch_calc_vm_prot_bits(prot) arch_calc_vm_prot_bits(prot) - -static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags) -{ - return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : 0; -} -#define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags) - -static inline int arch_validate_prot(unsigned long prot) -{ - if (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM | PROT_SAO)) - return 0; - if ((prot & PROT_SAO) && !cpu_has_feature(CPU_FTR_SAO)) - return 0; - return 1; -} -#define arch_validate_prot(prot) arch_validate_prot(prot) - -#endif /* CONFIG_PPC64 */ -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_MMAN_H */ diff --git a/include/asm-powerpc/mmu-40x.h b/include/asm-powerpc/mmu-40x.h deleted file mode 100644 index 3d108676584c..000000000000 --- a/include/asm-powerpc/mmu-40x.h +++ /dev/null @@ -1,63 +0,0 @@ -#ifndef _ASM_POWERPC_MMU_40X_H_ -#define _ASM_POWERPC_MMU_40X_H_ - -/* - * PPC40x support - */ - -#define PPC40X_TLB_SIZE 64 - -/* - * TLB entries are defined by a "high" tag portion and a "low" data - * portion. On all architectures, the data portion is 32-bits. - * - * TLB entries are managed entirely under software control by reading, - * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx - * instructions. - */ - -#define TLB_LO 1 -#define TLB_HI 0 - -#define TLB_DATA TLB_LO -#define TLB_TAG TLB_HI - -/* Tag portion */ - -#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */ -#define TLB_PAGESZ_MASK 0x00000380 -#define TLB_PAGESZ(x) (((x) & 0x7) << 7) -#define PAGESZ_1K 0 -#define PAGESZ_4K 1 -#define PAGESZ_16K 2 -#define PAGESZ_64K 3 -#define PAGESZ_256K 4 -#define PAGESZ_1M 5 -#define PAGESZ_4M 6 -#define PAGESZ_16M 7 -#define TLB_VALID 0x00000040 /* Entry is valid */ - -/* Data portion */ - -#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */ -#define TLB_PERM_MASK 0x00000300 -#define TLB_EX 0x00000200 /* Instruction execution allowed */ -#define TLB_WR 0x00000100 /* Writes permitted */ -#define TLB_ZSEL_MASK 0x000000F0 -#define TLB_ZSEL(x) (((x) & 0xF) << 4) -#define TLB_ATTR_MASK 0x0000000F -#define TLB_W 0x00000008 /* Caching is write-through */ -#define TLB_I 0x00000004 /* Caching is inhibited */ -#define TLB_M 0x00000002 /* Memory is coherent */ -#define TLB_G 0x00000001 /* Memory is guarded from prefetch */ - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned long id; - unsigned long vdso_base; -} mm_context_t; - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_MMU_40X_H_ */ diff --git a/include/asm-powerpc/mmu-44x.h b/include/asm-powerpc/mmu-44x.h deleted file mode 100644 index a825524c981a..000000000000 --- a/include/asm-powerpc/mmu-44x.h +++ /dev/null @@ -1,76 +0,0 @@ -#ifndef _ASM_POWERPC_MMU_44X_H_ -#define _ASM_POWERPC_MMU_44X_H_ -/* - * PPC440 support - */ - -#define PPC44x_MMUCR_TID 0x000000ff -#define PPC44x_MMUCR_STS 0x00010000 - -#define PPC44x_TLB_PAGEID 0 -#define PPC44x_TLB_XLAT 1 -#define PPC44x_TLB_ATTRIB 2 - -/* Page identification fields */ -#define PPC44x_TLB_EPN_MASK 0xfffffc00 /* Effective Page Number */ -#define PPC44x_TLB_VALID 0x00000200 /* Valid flag */ -#define PPC44x_TLB_TS 0x00000100 /* Translation address space */ -#define PPC44x_TLB_1K 0x00000000 /* Page sizes */ -#define PPC44x_TLB_4K 0x00000010 -#define PPC44x_TLB_16K 0x00000020 -#define PPC44x_TLB_64K 0x00000030 -#define PPC44x_TLB_256K 0x00000040 -#define PPC44x_TLB_1M 0x00000050 -#define PPC44x_TLB_16M 0x00000070 -#define PPC44x_TLB_256M 0x00000090 - -/* Translation fields */ -#define PPC44x_TLB_RPN_MASK 0xfffffc00 /* Real Page Number */ -#define PPC44x_TLB_ERPN_MASK 0x0000000f - -/* Storage attribute and access control fields */ -#define PPC44x_TLB_ATTR_MASK 0x0000ff80 -#define PPC44x_TLB_U0 0x00008000 /* User 0 */ -#define PPC44x_TLB_U1 0x00004000 /* User 1 */ -#define PPC44x_TLB_U2 0x00002000 /* User 2 */ -#define PPC44x_TLB_U3 0x00001000 /* User 3 */ -#define PPC44x_TLB_W 0x00000800 /* Caching is write-through */ -#define PPC44x_TLB_I 0x00000400 /* Caching is inhibited */ -#define PPC44x_TLB_M 0x00000200 /* Memory is coherent */ -#define PPC44x_TLB_G 0x00000100 /* Memory is guarded */ -#define PPC44x_TLB_E 0x00000080 /* Memory is guarded */ - -#define PPC44x_TLB_PERM_MASK 0x0000003f -#define PPC44x_TLB_UX 0x00000020 /* User execution */ -#define PPC44x_TLB_UW 0x00000010 /* User write */ -#define PPC44x_TLB_UR 0x00000008 /* User read */ -#define PPC44x_TLB_SX 0x00000004 /* Super execution */ -#define PPC44x_TLB_SW 0x00000002 /* Super write */ -#define PPC44x_TLB_SR 0x00000001 /* Super read */ - -/* Number of TLB entries */ -#define PPC44x_TLB_SIZE 64 - -#ifndef __ASSEMBLY__ - -extern unsigned int tlb_44x_hwater; - -typedef struct { - unsigned long id; - unsigned long vdso_base; -} mm_context_t; - -#endif /* !__ASSEMBLY__ */ - -#ifndef CONFIG_PPC_EARLY_DEBUG_44x -#define PPC44x_EARLY_TLBS 1 -#else -#define PPC44x_EARLY_TLBS 2 -#define PPC44x_EARLY_DEBUG_VIRTADDR (ASM_CONST(0xf0000000) \ - | (ASM_CONST(CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW) & 0xffff)) -#endif - -/* Size of the TLBs used for pinning in lowmem */ -#define PPC_PIN_SIZE (1 << 28) /* 256M */ - -#endif /* _ASM_POWERPC_MMU_44X_H_ */ diff --git a/include/asm-powerpc/mmu-8xx.h b/include/asm-powerpc/mmu-8xx.h deleted file mode 100644 index 9db877eb88db..000000000000 --- a/include/asm-powerpc/mmu-8xx.h +++ /dev/null @@ -1,145 +0,0 @@ -#ifndef _ASM_POWERPC_MMU_8XX_H_ -#define _ASM_POWERPC_MMU_8XX_H_ -/* - * PPC8xx support - */ - -/* Control/status registers for the MPC8xx. - * A write operation to these registers causes serialized access. - * During software tablewalk, the registers used perform mask/shift-add - * operations when written/read. A TLB entry is created when the Mx_RPN - * is written, and the contents of several registers are used to - * create the entry. - */ -#define SPRN_MI_CTR 784 /* Instruction TLB control register */ -#define MI_GPM 0x80000000 /* Set domain manager mode */ -#define MI_PPM 0x40000000 /* Set subpage protection */ -#define MI_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */ -#define MI_RSV4I 0x08000000 /* Reserve 4 TLB entries */ -#define MI_PPCS 0x02000000 /* Use MI_RPN prob/priv state */ -#define MI_IDXMASK 0x00001f00 /* TLB index to be loaded */ -#define MI_RESETVAL 0x00000000 /* Value of register at reset */ - -/* These are the Ks and Kp from the PowerPC books. For proper operation, - * Ks = 0, Kp = 1. - */ -#define SPRN_MI_AP 786 -#define MI_Ks 0x80000000 /* Should not be set */ -#define MI_Kp 0x40000000 /* Should always be set */ - -/* The effective page number register. When read, contains the information - * about the last instruction TLB miss. When MI_RPN is written, bits in - * this register are used to create the TLB entry. - */ -#define SPRN_MI_EPN 787 -#define MI_EPNMASK 0xfffff000 /* Effective page number for entry */ -#define MI_EVALID 0x00000200 /* Entry is valid */ -#define MI_ASIDMASK 0x0000000f /* ASID match value */ - /* Reset value is undefined */ - -/* A "level 1" or "segment" or whatever you want to call it register. - * For the instruction TLB, it contains bits that get loaded into the - * TLB entry when the MI_RPN is written. - */ -#define SPRN_MI_TWC 789 -#define MI_APG 0x000001e0 /* Access protection group (0) */ -#define MI_GUARDED 0x00000010 /* Guarded storage */ -#define MI_PSMASK 0x0000000c /* Mask of page size bits */ -#define MI_PS8MEG 0x0000000c /* 8M page size */ -#define MI_PS512K 0x00000004 /* 512K page size */ -#define MI_PS4K_16K 0x00000000 /* 4K or 16K page size */ -#define MI_SVALID 0x00000001 /* Segment entry is valid */ - /* Reset value is undefined */ - -/* Real page number. Defined by the pte. Writing this register - * causes a TLB entry to be created for the instruction TLB, using - * additional information from the MI_EPN, and MI_TWC registers. - */ -#define SPRN_MI_RPN 790 - -/* Define an RPN value for mapping kernel memory to large virtual - * pages for boot initialization. This has real page number of 0, - * large page size, shared page, cache enabled, and valid. - * Also mark all subpages valid and write access. - */ -#define MI_BOOTINIT 0x000001fd - -#define SPRN_MD_CTR 792 /* Data TLB control register */ -#define MD_GPM 0x80000000 /* Set domain manager mode */ -#define MD_PPM 0x40000000 /* Set subpage protection */ -#define MD_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */ -#define MD_WTDEF 0x10000000 /* Set writethrough when MMU dis */ -#define MD_RSV4I 0x08000000 /* Reserve 4 TLB entries */ -#define MD_TWAM 0x04000000 /* Use 4K page hardware assist */ -#define MD_PPCS 0x02000000 /* Use MI_RPN prob/priv state */ -#define MD_IDXMASK 0x00001f00 /* TLB index to be loaded */ -#define MD_RESETVAL 0x04000000 /* Value of register at reset */ - -#define SPRN_M_CASID 793 /* Address space ID (context) to match */ -#define MC_ASIDMASK 0x0000000f /* Bits used for ASID value */ - - -/* These are the Ks and Kp from the PowerPC books. For proper operation, - * Ks = 0, Kp = 1. - */ -#define SPRN_MD_AP 794 -#define MD_Ks 0x80000000 /* Should not be set */ -#define MD_Kp 0x40000000 /* Should always be set */ - -/* The effective page number register. When read, contains the information - * about the last instruction TLB miss. When MD_RPN is written, bits in - * this register are used to create the TLB entry. - */ -#define SPRN_MD_EPN 795 -#define MD_EPNMASK 0xfffff000 /* Effective page number for entry */ -#define MD_EVALID 0x00000200 /* Entry is valid */ -#define MD_ASIDMASK 0x0000000f /* ASID match value */ - /* Reset value is undefined */ - -/* The pointer to the base address of the first level page table. - * During a software tablewalk, reading this register provides the address - * of the entry associated with MD_EPN. - */ -#define SPRN_M_TWB 796 -#define M_L1TB 0xfffff000 /* Level 1 table base address */ -#define M_L1INDX 0x00000ffc /* Level 1 index, when read */ - /* Reset value is undefined */ - -/* A "level 1" or "segment" or whatever you want to call it register. - * For the data TLB, it contains bits that get loaded into the TLB entry - * when the MD_RPN is written. It is also provides the hardware assist - * for finding the PTE address during software tablewalk. - */ -#define SPRN_MD_TWC 797 -#define MD_L2TB 0xfffff000 /* Level 2 table base address */ -#define MD_L2INDX 0xfffffe00 /* Level 2 index (*pte), when read */ -#define MD_APG 0x000001e0 /* Access protection group (0) */ -#define MD_GUARDED 0x00000010 /* Guarded storage */ -#define MD_PSMASK 0x0000000c /* Mask of page size bits */ -#define MD_PS8MEG 0x0000000c /* 8M page size */ -#define MD_PS512K 0x00000004 /* 512K page size */ -#define MD_PS4K_16K 0x00000000 /* 4K or 16K page size */ -#define MD_WT 0x00000002 /* Use writethrough page attribute */ -#define MD_SVALID 0x00000001 /* Segment entry is valid */ - /* Reset value is undefined */ - - -/* Real page number. Defined by the pte. Writing this register - * causes a TLB entry to be created for the data TLB, using - * additional information from the MD_EPN, and MD_TWC registers. - */ -#define SPRN_MD_RPN 798 - -/* This is a temporary storage register that could be used to save - * a processor working register during a tablewalk. - */ -#define SPRN_M_TW 799 - -#ifndef __ASSEMBLY__ -typedef struct { - unsigned long id; - unsigned long vdso_base; -} mm_context_t; -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_MMU_8XX_H_ */ diff --git a/include/asm-powerpc/mmu-fsl-booke.h b/include/asm-powerpc/mmu-fsl-booke.h deleted file mode 100644 index 925d93cf64d8..000000000000 --- a/include/asm-powerpc/mmu-fsl-booke.h +++ /dev/null @@ -1,82 +0,0 @@ -#ifndef _ASM_POWERPC_MMU_FSL_BOOKE_H_ -#define _ASM_POWERPC_MMU_FSL_BOOKE_H_ -/* - * Freescale Book-E MMU support - */ - -/* Book-E defined page sizes */ -#define BOOKE_PAGESZ_1K 0 -#define BOOKE_PAGESZ_4K 1 -#define BOOKE_PAGESZ_16K 2 -#define BOOKE_PAGESZ_64K 3 -#define BOOKE_PAGESZ_256K 4 -#define BOOKE_PAGESZ_1M 5 -#define BOOKE_PAGESZ_4M 6 -#define BOOKE_PAGESZ_16M 7 -#define BOOKE_PAGESZ_64M 8 -#define BOOKE_PAGESZ_256M 9 -#define BOOKE_PAGESZ_1GB 10 -#define BOOKE_PAGESZ_4GB 11 -#define BOOKE_PAGESZ_16GB 12 -#define BOOKE_PAGESZ_64GB 13 -#define BOOKE_PAGESZ_256GB 14 -#define BOOKE_PAGESZ_1TB 15 - -#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000) -#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000) -#define MAS0_NV(x) ((x) & 0x00000FFF) - -#define MAS1_VALID 0x80000000 -#define MAS1_IPROT 0x40000000 -#define MAS1_TID(x) ((x << 16) & 0x3FFF0000) -#define MAS1_TS 0x00001000 -#define MAS1_TSIZE(x) ((x << 8) & 0x00000F00) - -#define MAS2_EPN 0xFFFFF000 -#define MAS2_X0 0x00000040 -#define MAS2_X1 0x00000020 -#define MAS2_W 0x00000010 -#define MAS2_I 0x00000008 -#define MAS2_M 0x00000004 -#define MAS2_G 0x00000002 -#define MAS2_E 0x00000001 - -#define MAS3_RPN 0xFFFFF000 -#define MAS3_U0 0x00000200 -#define MAS3_U1 0x00000100 -#define MAS3_U2 0x00000080 -#define MAS3_U3 0x00000040 -#define MAS3_UX 0x00000020 -#define MAS3_SX 0x00000010 -#define MAS3_UW 0x00000008 -#define MAS3_SW 0x00000004 -#define MAS3_UR 0x00000002 -#define MAS3_SR 0x00000001 - -#define MAS4_TLBSELD(x) MAS0_TLBSEL(x) -#define MAS4_TIDDSEL 0x000F0000 -#define MAS4_TSIZED(x) MAS1_TSIZE(x) -#define MAS4_X0D 0x00000040 -#define MAS4_X1D 0x00000020 -#define MAS4_WD 0x00000010 -#define MAS4_ID 0x00000008 -#define MAS4_MD 0x00000004 -#define MAS4_GD 0x00000002 -#define MAS4_ED 0x00000001 - -#define MAS6_SPID0 0x3FFF0000 -#define MAS6_SPID1 0x00007FFE -#define MAS6_SAS 0x00000001 -#define MAS6_SPID MAS6_SPID0 - -#define MAS7_RPN 0xFFFFFFFF - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned long id; - unsigned long vdso_base; -} mm_context_t; -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_MMU_FSL_BOOKE_H_ */ diff --git a/include/asm-powerpc/mmu-hash32.h b/include/asm-powerpc/mmu-hash32.h deleted file mode 100644 index 16b1a1e77e64..000000000000 --- a/include/asm-powerpc/mmu-hash32.h +++ /dev/null @@ -1,83 +0,0 @@ -#ifndef _ASM_POWERPC_MMU_HASH32_H_ -#define _ASM_POWERPC_MMU_HASH32_H_ -/* - * 32-bit hash table MMU support - */ - -/* - * BATs - */ - -/* Block size masks */ -#define BL_128K 0x000 -#define BL_256K 0x001 -#define BL_512K 0x003 -#define BL_1M 0x007 -#define BL_2M 0x00F -#define BL_4M 0x01F -#define BL_8M 0x03F -#define BL_16M 0x07F -#define BL_32M 0x0FF -#define BL_64M 0x1FF -#define BL_128M 0x3FF -#define BL_256M 0x7FF - -/* BAT Access Protection */ -#define BPP_XX 0x00 /* No access */ -#define BPP_RX 0x01 /* Read only */ -#define BPP_RW 0x02 /* Read/write */ - -#ifndef __ASSEMBLY__ -/* Contort a phys_addr_t into the right format/bits for a BAT */ -#ifdef CONFIG_PHYS_64BIT -#define BAT_PHYS_ADDR(x) ((u32)((x & 0x00000000fffe0000ULL) | \ - ((x & 0x0000000e00000000ULL) >> 24) | \ - ((x & 0x0000000100000000ULL) >> 30))) -#else -#define BAT_PHYS_ADDR(x) (x) -#endif - -struct ppc_bat { - u32 batu; - u32 batl; -}; -#endif /* !__ASSEMBLY__ */ - -/* - * Hash table - */ - -/* Values for PP (assumes Ks=0, Kp=1) */ -#define PP_RWXX 0 /* Supervisor read/write, User none */ -#define PP_RWRX 1 /* Supervisor read/write, User read */ -#define PP_RWRW 2 /* Supervisor read/write, User read/write */ -#define PP_RXRX 3 /* Supervisor read, User read */ - -#ifndef __ASSEMBLY__ - -/* Hardware Page Table Entry */ -struct hash_pte { - unsigned long v:1; /* Entry is valid */ - unsigned long vsid:24; /* Virtual segment identifier */ - unsigned long h:1; /* Hash algorithm indicator */ - unsigned long api:6; /* Abbreviated page index */ - unsigned long rpn:20; /* Real (physical) page number */ - unsigned long :3; /* Unused */ - unsigned long r:1; /* Referenced */ - unsigned long c:1; /* Changed */ - unsigned long w:1; /* Write-thru cache mode */ - unsigned long i:1; /* Cache inhibited */ - unsigned long m:1; /* Memory coherence */ - unsigned long g:1; /* Guarded */ - unsigned long :1; /* Unused */ - unsigned long pp:2; /* Page protection */ -}; - -typedef struct { - unsigned long id; - unsigned long vdso_base; -} mm_context_t; - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_MMU_HASH32_H_ */ diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h deleted file mode 100644 index 19c7a9403490..000000000000 --- a/include/asm-powerpc/mmu-hash64.h +++ /dev/null @@ -1,478 +0,0 @@ -#ifndef _ASM_POWERPC_MMU_HASH64_H_ -#define _ASM_POWERPC_MMU_HASH64_H_ -/* - * PowerPC64 memory management structures - * - * Dave Engebretsen & Mike Corrigan <{engebret|mikejc}@us.ibm.com> - * PPC64 rework. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include - -/* - * Segment table - */ - -#define STE_ESID_V 0x80 -#define STE_ESID_KS 0x20 -#define STE_ESID_KP 0x10 -#define STE_ESID_N 0x08 - -#define STE_VSID_SHIFT 12 - -/* Location of cpu0's segment table */ -#define STAB0_PAGE 0x6 -#define STAB0_OFFSET (STAB0_PAGE << 12) -#define STAB0_PHYS_ADDR (STAB0_OFFSET + PHYSICAL_START) - -#ifndef __ASSEMBLY__ -extern char initial_stab[]; -#endif /* ! __ASSEMBLY */ - -/* - * SLB - */ - -#define SLB_NUM_BOLTED 3 -#define SLB_CACHE_ENTRIES 8 - -/* Bits in the SLB ESID word */ -#define SLB_ESID_V ASM_CONST(0x0000000008000000) /* valid */ - -/* Bits in the SLB VSID word */ -#define SLB_VSID_SHIFT 12 -#define SLB_VSID_SHIFT_1T 24 -#define SLB_VSID_SSIZE_SHIFT 62 -#define SLB_VSID_B ASM_CONST(0xc000000000000000) -#define SLB_VSID_B_256M ASM_CONST(0x0000000000000000) -#define SLB_VSID_B_1T ASM_CONST(0x4000000000000000) -#define SLB_VSID_KS ASM_CONST(0x0000000000000800) -#define SLB_VSID_KP ASM_CONST(0x0000000000000400) -#define SLB_VSID_N ASM_CONST(0x0000000000000200) /* no-execute */ -#define SLB_VSID_L ASM_CONST(0x0000000000000100) -#define SLB_VSID_C ASM_CONST(0x0000000000000080) /* class */ -#define SLB_VSID_LP ASM_CONST(0x0000000000000030) -#define SLB_VSID_LP_00 ASM_CONST(0x0000000000000000) -#define SLB_VSID_LP_01 ASM_CONST(0x0000000000000010) -#define SLB_VSID_LP_10 ASM_CONST(0x0000000000000020) -#define SLB_VSID_LP_11 ASM_CONST(0x0000000000000030) -#define SLB_VSID_LLP (SLB_VSID_L|SLB_VSID_LP) - -#define SLB_VSID_KERNEL (SLB_VSID_KP) -#define SLB_VSID_USER (SLB_VSID_KP|SLB_VSID_KS|SLB_VSID_C) - -#define SLBIE_C (0x08000000) -#define SLBIE_SSIZE_SHIFT 25 - -/* - * Hash table - */ - -#define HPTES_PER_GROUP 8 - -#define HPTE_V_SSIZE_SHIFT 62 -#define HPTE_V_AVPN_SHIFT 7 -#define HPTE_V_AVPN ASM_CONST(0x3fffffffffffff80) -#define HPTE_V_AVPN_VAL(x) (((x) & HPTE_V_AVPN) >> HPTE_V_AVPN_SHIFT) -#define HPTE_V_COMPARE(x,y) (!(((x) ^ (y)) & 0xffffffffffffff80UL)) -#define HPTE_V_BOLTED ASM_CONST(0x0000000000000010) -#define HPTE_V_LOCK ASM_CONST(0x0000000000000008) -#define HPTE_V_LARGE ASM_CONST(0x0000000000000004) -#define HPTE_V_SECONDARY ASM_CONST(0x0000000000000002) -#define HPTE_V_VALID ASM_CONST(0x0000000000000001) - -#define HPTE_R_PP0 ASM_CONST(0x8000000000000000) -#define HPTE_R_TS ASM_CONST(0x4000000000000000) -#define HPTE_R_RPN_SHIFT 12 -#define HPTE_R_RPN ASM_CONST(0x3ffffffffffff000) -#define HPTE_R_FLAGS ASM_CONST(0x00000000000003ff) -#define HPTE_R_PP ASM_CONST(0x0000000000000003) -#define HPTE_R_N ASM_CONST(0x0000000000000004) -#define HPTE_R_C ASM_CONST(0x0000000000000080) -#define HPTE_R_R ASM_CONST(0x0000000000000100) - -#define HPTE_V_1TB_SEG ASM_CONST(0x4000000000000000) -#define HPTE_V_VRMA_MASK ASM_CONST(0x4001ffffff000000) - -/* Values for PP (assumes Ks=0, Kp=1) */ -/* pp0 will always be 0 for linux */ -#define PP_RWXX 0 /* Supervisor read/write, User none */ -#define PP_RWRX 1 /* Supervisor read/write, User read */ -#define PP_RWRW 2 /* Supervisor read/write, User read/write */ -#define PP_RXRX 3 /* Supervisor read, User read */ - -#ifndef __ASSEMBLY__ - -struct hash_pte { - unsigned long v; - unsigned long r; -}; - -extern struct hash_pte *htab_address; -extern unsigned long htab_size_bytes; -extern unsigned long htab_hash_mask; - -/* - * Page size definition - * - * shift : is the "PAGE_SHIFT" value for that page size - * sllp : is a bit mask with the value of SLB L || LP to be or'ed - * directly to a slbmte "vsid" value - * penc : is the HPTE encoding mask for the "LP" field: - * - */ -struct mmu_psize_def -{ - unsigned int shift; /* number of bits */ - unsigned int penc; /* HPTE encoding */ - unsigned int tlbiel; /* tlbiel supported for that page size */ - unsigned long avpnm; /* bits to mask out in AVPN in the HPTE */ - unsigned long sllp; /* SLB L||LP (exact mask to use in slbmte) */ -}; - -#endif /* __ASSEMBLY__ */ - -/* - * The kernel use the constants below to index in the page sizes array. - * The use of fixed constants for this purpose is better for performances - * of the low level hash refill handlers. - * - * A non supported page size has a "shift" field set to 0 - * - * Any new page size being implemented can get a new entry in here. Whether - * the kernel will use it or not is a different matter though. The actual page - * size used by hugetlbfs is not defined here and may be made variable - */ - -#define MMU_PAGE_4K 0 /* 4K */ -#define MMU_PAGE_64K 1 /* 64K */ -#define MMU_PAGE_64K_AP 2 /* 64K Admixed (in a 4K segment) */ -#define MMU_PAGE_1M 3 /* 1M */ -#define MMU_PAGE_16M 4 /* 16M */ -#define MMU_PAGE_16G 5 /* 16G */ -#define MMU_PAGE_COUNT 6 - -/* - * Segment sizes. - * These are the values used by hardware in the B field of - * SLB entries and the first dword of MMU hashtable entries. - * The B field is 2 bits; the values 2 and 3 are unused and reserved. - */ -#define MMU_SEGSIZE_256M 0 -#define MMU_SEGSIZE_1T 1 - - -#ifndef __ASSEMBLY__ - -/* - * The current system page and segment sizes - */ -extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; -extern int mmu_linear_psize; -extern int mmu_virtual_psize; -extern int mmu_vmalloc_psize; -extern int mmu_vmemmap_psize; -extern int mmu_io_psize; -extern int mmu_kernel_ssize; -extern int mmu_highuser_ssize; -extern u16 mmu_slb_size; -extern unsigned long tce_alloc_start, tce_alloc_end; - -/* - * If the processor supports 64k normal pages but not 64k cache - * inhibited pages, we have to be prepared to switch processes - * to use 4k pages when they create cache-inhibited mappings. - * If this is the case, mmu_ci_restrictions will be set to 1. - */ -extern int mmu_ci_restrictions; - -#ifdef CONFIG_HUGETLB_PAGE -/* - * The page size indexes of the huge pages for use by hugetlbfs - */ -extern unsigned int mmu_huge_psizes[MMU_PAGE_COUNT]; - -#endif /* CONFIG_HUGETLB_PAGE */ - -/* - * This function sets the AVPN and L fields of the HPTE appropriately - * for the page size - */ -static inline unsigned long hpte_encode_v(unsigned long va, int psize, - int ssize) -{ - unsigned long v; - v = (va >> 23) & ~(mmu_psize_defs[psize].avpnm); - v <<= HPTE_V_AVPN_SHIFT; - if (psize != MMU_PAGE_4K) - v |= HPTE_V_LARGE; - v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT; - return v; -} - -/* - * This function sets the ARPN, and LP fields of the HPTE appropriately - * for the page size. We assume the pa is already "clean" that is properly - * aligned for the requested page size - */ -static inline unsigned long hpte_encode_r(unsigned long pa, int psize) -{ - unsigned long r; - - /* A 4K page needs no special encoding */ - if (psize == MMU_PAGE_4K) - return pa & HPTE_R_RPN; - else { - unsigned int penc = mmu_psize_defs[psize].penc; - unsigned int shift = mmu_psize_defs[psize].shift; - return (pa & ~((1ul << shift) - 1)) | (penc << 12); - } - return r; -} - -/* - * Build a VA given VSID, EA and segment size - */ -static inline unsigned long hpt_va(unsigned long ea, unsigned long vsid, - int ssize) -{ - if (ssize == MMU_SEGSIZE_256M) - return (vsid << 28) | (ea & 0xfffffffUL); - return (vsid << 40) | (ea & 0xffffffffffUL); -} - -/* - * This hashes a virtual address - */ - -static inline unsigned long hpt_hash(unsigned long va, unsigned int shift, - int ssize) -{ - unsigned long hash, vsid; - - if (ssize == MMU_SEGSIZE_256M) { - hash = (va >> 28) ^ ((va & 0x0fffffffUL) >> shift); - } else { - vsid = va >> 40; - hash = vsid ^ (vsid << 25) ^ ((va & 0xffffffffffUL) >> shift); - } - return hash & 0x7fffffffffUL; -} - -extern int __hash_page_4K(unsigned long ea, unsigned long access, - unsigned long vsid, pte_t *ptep, unsigned long trap, - unsigned int local, int ssize, int subpage_prot); -extern int __hash_page_64K(unsigned long ea, unsigned long access, - unsigned long vsid, pte_t *ptep, unsigned long trap, - unsigned int local, int ssize); -struct mm_struct; -extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); -extern int hash_huge_page(struct mm_struct *mm, unsigned long access, - unsigned long ea, unsigned long vsid, int local, - unsigned long trap); - -extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, - unsigned long pstart, unsigned long mode, - int psize, int ssize); -extern void set_huge_psize(int psize); -extern void add_gpage(unsigned long addr, unsigned long page_size, - unsigned long number_of_pages); -extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr); - -extern void htab_initialize(void); -extern void htab_initialize_secondary(void); -extern void hpte_init_native(void); -extern void hpte_init_lpar(void); -extern void hpte_init_iSeries(void); -extern void hpte_init_beat(void); -extern void hpte_init_beat_v3(void); - -extern void stabs_alloc(void); -extern void slb_initialize(void); -extern void slb_flush_and_rebolt(void); -extern void stab_initialize(unsigned long stab); - -extern void slb_vmalloc_update(void); -#endif /* __ASSEMBLY__ */ - -/* - * VSID allocation - * - * We first generate a 36-bit "proto-VSID". For kernel addresses this - * is equal to the ESID, for user addresses it is: - * (context << 15) | (esid & 0x7fff) - * - * The two forms are distinguishable because the top bit is 0 for user - * addresses, whereas the top two bits are 1 for kernel addresses. - * Proto-VSIDs with the top two bits equal to 0b10 are reserved for - * now. - * - * The proto-VSIDs are then scrambled into real VSIDs with the - * multiplicative hash: - * - * VSID = (proto-VSID * VSID_MULTIPLIER) % VSID_MODULUS - * where VSID_MULTIPLIER = 268435399 = 0xFFFFFC7 - * VSID_MODULUS = 2^36-1 = 0xFFFFFFFFF - * - * This scramble is only well defined for proto-VSIDs below - * 0xFFFFFFFFF, so both proto-VSID and actual VSID 0xFFFFFFFFF are - * reserved. VSID_MULTIPLIER is prime, so in particular it is - * co-prime to VSID_MODULUS, making this a 1:1 scrambling function. - * Because the modulus is 2^n-1 we can compute it efficiently without - * a divide or extra multiply (see below). - * - * This scheme has several advantages over older methods: - * - * - We have VSIDs allocated for every kernel address - * (i.e. everything above 0xC000000000000000), except the very top - * segment, which simplifies several things. - * - * - We allow for 15 significant bits of ESID and 20 bits of - * context for user addresses. i.e. 8T (43 bits) of address space for - * up to 1M contexts (although the page table structure and context - * allocation will need changes to take advantage of this). - * - * - The scramble function gives robust scattering in the hash - * table (at least based on some initial results). The previous - * method was more susceptible to pathological cases giving excessive - * hash collisions. - */ -/* - * WARNING - If you change these you must make sure the asm - * implementations in slb_allocate (slb_low.S), do_stab_bolted - * (head.S) and ASM_VSID_SCRAMBLE (below) are changed accordingly. - * - * You'll also need to change the precomputed VSID values in head.S - * which are used by the iSeries firmware. - */ - -#define VSID_MULTIPLIER_256M ASM_CONST(200730139) /* 28-bit prime */ -#define VSID_BITS_256M 36 -#define VSID_MODULUS_256M ((1UL<= \ - * 2^36-1, then r3+1 has the 2^36 bit set. So, if r3+1 has \ - * the bit clear, r3 already has the answer we want, if it \ - * doesn't, the answer is the low 36 bits of r3+1. So in all \ - * cases the answer is the low 36 bits of (r3 + ((r3+1) >> 36))*/\ - addi rx,rt,1; \ - srdi rx,rx,VSID_BITS_##size; /* extract 2^VSID_BITS bit */ \ - add rt,rt,rx - - -#ifndef __ASSEMBLY__ - -typedef unsigned long mm_context_id_t; - -typedef struct { - mm_context_id_t id; - u16 user_psize; /* page size index */ - -#ifdef CONFIG_PPC_MM_SLICES - u64 low_slices_psize; /* SLB page size encodings */ - u64 high_slices_psize; /* 4 bits per slice for now */ -#else - u16 sllp; /* SLB page size encoding */ -#endif - unsigned long vdso_base; -} mm_context_t; - - -#if 0 -/* - * The code below is equivalent to this function for arguments - * < 2^VSID_BITS, which is all this should ever be called - * with. However gcc is not clever enough to compute the - * modulus (2^n-1) without a second multiply. - */ -#define vsid_scrample(protovsid, size) \ - ((((protovsid) * VSID_MULTIPLIER_##size) % VSID_MODULUS_##size)) - -#else /* 1 */ -#define vsid_scramble(protovsid, size) \ - ({ \ - unsigned long x; \ - x = (protovsid) * VSID_MULTIPLIER_##size; \ - x = (x >> VSID_BITS_##size) + (x & VSID_MODULUS_##size); \ - (x + ((x+1) >> VSID_BITS_##size)) & VSID_MODULUS_##size; \ - }) -#endif /* 1 */ - -/* This is only valid for addresses >= KERNELBASE */ -static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize) -{ - if (ssize == MMU_SEGSIZE_256M) - return vsid_scramble(ea >> SID_SHIFT, 256M); - return vsid_scramble(ea >> SID_SHIFT_1T, 1T); -} - -/* Returns the segment size indicator for a user address */ -static inline int user_segment_size(unsigned long addr) -{ - /* Use 1T segments if possible for addresses >= 1T */ - if (addr >= (1UL << SID_SHIFT_1T)) - return mmu_highuser_ssize; - return MMU_SEGSIZE_256M; -} - -/* This is only valid for user addresses (which are below 2^44) */ -static inline unsigned long get_vsid(unsigned long context, unsigned long ea, - int ssize) -{ - if (ssize == MMU_SEGSIZE_256M) - return vsid_scramble((context << USER_ESID_BITS) - | (ea >> SID_SHIFT), 256M); - return vsid_scramble((context << USER_ESID_BITS_1T) - | (ea >> SID_SHIFT_1T), 1T); -} - -/* - * This is only used on legacy iSeries in lparmap.c, - * hence the 256MB segment assumption. - */ -#define VSID_SCRAMBLE(pvsid) (((pvsid) * VSID_MULTIPLIER_256M) % \ - VSID_MODULUS_256M) -#define KERNEL_VSID(ea) VSID_SCRAMBLE(GET_ESID(ea)) - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_MMU_HASH64_H_ */ diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h deleted file mode 100644 index 4c0e1b4f975c..000000000000 --- a/include/asm-powerpc/mmu.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _ASM_POWERPC_MMU_H_ -#define _ASM_POWERPC_MMU_H_ -#ifdef __KERNEL__ - -#ifdef CONFIG_PPC64 -/* 64-bit classic hash table MMU */ -# include -#elif defined(CONFIG_PPC_STD_MMU) -/* 32-bit classic hash table MMU */ -# include -#elif defined(CONFIG_40x) -/* 40x-style software loaded TLB */ -# include -#elif defined(CONFIG_44x) -/* 44x-style software loaded TLB */ -# include -#elif defined(CONFIG_FSL_BOOKE) -/* Freescale Book-E software loaded TLB */ -# include -#elif defined (CONFIG_PPC_8xx) -/* Motorola/Freescale 8xx software loaded TLB */ -# include -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_MMU_H_ */ diff --git a/include/asm-powerpc/mmu_context.h b/include/asm-powerpc/mmu_context.h deleted file mode 100644 index 9102b8bf0ead..000000000000 --- a/include/asm-powerpc/mmu_context.h +++ /dev/null @@ -1,280 +0,0 @@ -#ifndef __ASM_POWERPC_MMU_CONTEXT_H -#define __ASM_POWERPC_MMU_CONTEXT_H -#ifdef __KERNEL__ - -#include -#include -#include - -#ifndef CONFIG_PPC64 -#include -#include - -/* - * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs - * (virtual segment identifiers) for each context. Although the - * hardware supports 24-bit VSIDs, and thus >1 million contexts, - * we only use 32,768 of them. That is ample, since there can be - * at most around 30,000 tasks in the system anyway, and it means - * that we can use a bitmap to indicate which contexts are in use. - * Using a bitmap means that we entirely avoid all of the problems - * that we used to have when the context number overflowed, - * particularly on SMP systems. - * -- paulus. - */ - -/* - * This function defines the mapping from contexts to VSIDs (virtual - * segment IDs). We use a skew on both the context and the high 4 bits - * of the 32-bit virtual address (the "effective segment ID") in order - * to spread out the entries in the MMU hash table. Note, if this - * function is changed then arch/ppc/mm/hashtable.S will have to be - * changed to correspond. - */ -#define CTX_TO_VSID(ctx, va) (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \ - & 0xffffff) - -/* - The MPC8xx has only 16 contexts. We rotate through them on each - task switch. A better way would be to keep track of tasks that - own contexts, and implement an LRU usage. That way very active - tasks don't always have to pay the TLB reload overhead. The - kernel pages are mapped shared, so the kernel can run on behalf - of any task that makes a kernel entry. Shared does not mean they - are not protected, just that the ASID comparison is not performed. - -- Dan - - The IBM4xx has 256 contexts, so we can just rotate through these - as a way of "switching" contexts. If the TID of the TLB is zero, - the PID/TID comparison is disabled, so we can use a TID of zero - to represent all kernel pages as shared among all contexts. - -- Dan - */ - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -#ifdef CONFIG_8xx -#define NO_CONTEXT 16 -#define LAST_CONTEXT 15 -#define FIRST_CONTEXT 0 - -#elif defined(CONFIG_4xx) -#define NO_CONTEXT 256 -#define LAST_CONTEXT 255 -#define FIRST_CONTEXT 1 - -#elif defined(CONFIG_E200) || defined(CONFIG_E500) -#define NO_CONTEXT 256 -#define LAST_CONTEXT 255 -#define FIRST_CONTEXT 1 - -#else - -/* PPC 6xx, 7xx CPUs */ -#define NO_CONTEXT ((unsigned long) -1) -#define LAST_CONTEXT 32767 -#define FIRST_CONTEXT 1 -#endif - -/* - * Set the current MMU context. - * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by - * loading up the segment registers for the user part of the address space. - * - * Since the PGD is immediately available, it is much faster to simply - * pass this along as a second parameter, which is required for 8xx and - * can be used for debugging on all processors (if you happen to have - * an Abatron). - */ -extern void set_context(unsigned long contextid, pgd_t *pgd); - -/* - * Bitmap of contexts in use. - * The size of this bitmap is LAST_CONTEXT + 1 bits. - */ -extern unsigned long context_map[]; - -/* - * This caches the next context number that we expect to be free. - * Its use is an optimization only, we can't rely on this context - * number to be free, but it usually will be. - */ -extern unsigned long next_mmu_context; - -/* - * If we don't have sufficient contexts to give one to every task - * that could be in the system, we need to be able to steal contexts. - * These variables support that. - */ -#if LAST_CONTEXT < 30000 -#define FEW_CONTEXTS 1 -extern atomic_t nr_free_contexts; -extern struct mm_struct *context_mm[LAST_CONTEXT+1]; -extern void steal_context(void); -#endif - -/* - * Get a new mmu context for the address space described by `mm'. - */ -static inline void get_mmu_context(struct mm_struct *mm) -{ - unsigned long ctx; - - if (mm->context.id != NO_CONTEXT) - return; -#ifdef FEW_CONTEXTS - while (atomic_dec_if_positive(&nr_free_contexts) < 0) - steal_context(); -#endif - ctx = next_mmu_context; - while (test_and_set_bit(ctx, context_map)) { - ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx); - if (ctx > LAST_CONTEXT) - ctx = 0; - } - next_mmu_context = (ctx + 1) & LAST_CONTEXT; - mm->context.id = ctx; -#ifdef FEW_CONTEXTS - context_mm[ctx] = mm; -#endif -} - -/* - * Set up the context for a new address space. - */ -static inline int init_new_context(struct task_struct *t, struct mm_struct *mm) -{ - mm->context.id = NO_CONTEXT; - mm->context.vdso_base = 0; - return 0; -} - -/* - * We're finished using the context for an address space. - */ -static inline void destroy_context(struct mm_struct *mm) -{ - preempt_disable(); - if (mm->context.id != NO_CONTEXT) { - clear_bit(mm->context.id, context_map); - mm->context.id = NO_CONTEXT; -#ifdef FEW_CONTEXTS - atomic_inc(&nr_free_contexts); -#endif - } - preempt_enable(); -} - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ -#ifdef CONFIG_ALTIVEC - if (cpu_has_feature(CPU_FTR_ALTIVEC)) - asm volatile ("dssall;\n" -#ifndef CONFIG_POWER4 - "sync;\n" /* G4 needs a sync here, G5 apparently not */ -#endif - : : ); -#endif /* CONFIG_ALTIVEC */ - - tsk->thread.pgdir = next->pgd; - - /* No need to flush userspace segments if the mm doesnt change */ - if (prev == next) - return; - - /* Setup new userspace context */ - get_mmu_context(next); - set_context(next->context.id, next->pgd); -} - -#define deactivate_mm(tsk,mm) do { } while (0) - -/* - * After we have set current->mm to a new value, this activates - * the context for the new mm so we see the new mappings. - */ -#define activate_mm(active_mm, mm) switch_mm(active_mm, mm, current) - -extern void mmu_context_init(void); - - -#else - -#include -#include -#include - -/* - * Copyright (C) 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -static inline void enter_lazy_tlb(struct mm_struct *mm, - struct task_struct *tsk) -{ -} - -/* - * The proto-VSID space has 2^35 - 1 segments available for user mappings. - * Each segment contains 2^28 bytes. Each context maps 2^44 bytes, - * so we can support 2^19-1 contexts (19 == 35 + 28 - 44). - */ -#define NO_CONTEXT 0 -#define MAX_CONTEXT ((1UL << 19) - 1) - -extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); -extern void destroy_context(struct mm_struct *mm); - -extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm); -extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm); - -/* - * switch_mm is the entry point called from the architecture independent - * code in kernel/sched.c - */ -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ - if (!cpu_isset(smp_processor_id(), next->cpu_vm_mask)) - cpu_set(smp_processor_id(), next->cpu_vm_mask); - - /* No need to flush userspace segments if the mm doesnt change */ - if (prev == next) - return; - -#ifdef CONFIG_ALTIVEC - if (cpu_has_feature(CPU_FTR_ALTIVEC)) - asm volatile ("dssall"); -#endif /* CONFIG_ALTIVEC */ - - if (cpu_has_feature(CPU_FTR_SLB)) - switch_slb(tsk, next); - else - switch_stab(tsk, next); -} - -#define deactivate_mm(tsk,mm) do { } while (0) - -/* - * After we have set current->mm to a new value, this activates - * the context for the new mm so we see the new mappings. - */ -static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next) -{ - unsigned long flags; - - local_irq_save(flags); - switch_mm(prev, next, current); - local_irq_restore(flags); -} - -#endif /* CONFIG_PPC64 */ -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_MMU_CONTEXT_H */ diff --git a/include/asm-powerpc/mmzone.h b/include/asm-powerpc/mmzone.h deleted file mode 100644 index 19f299b7e256..000000000000 --- a/include/asm-powerpc/mmzone.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99 - * - * PowerPC64 port: - * Copyright (C) 2002 Anton Blanchard, IBM Corp. - */ -#ifndef _ASM_MMZONE_H_ -#define _ASM_MMZONE_H_ -#ifdef __KERNEL__ - - -/* - * generic non-linear memory support: - * - * 1) we will not split memory into more chunks than will fit into the - * flags field of the struct page - */ - -#ifdef CONFIG_NEED_MULTIPLE_NODES - -extern struct pglist_data *node_data[]; -/* - * Return a pointer to the node data for node n. - */ -#define NODE_DATA(nid) (node_data[nid]) - -/* - * Following are specific to this numa platform. - */ - -extern int numa_cpu_lookup_table[]; -extern cpumask_t numa_cpumask_lookup_table[]; -#ifdef CONFIG_MEMORY_HOTPLUG -extern unsigned long max_pfn; -#endif - -/* - * Following are macros that each numa implmentation must define. - */ - -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn) - -#endif /* CONFIG_NEED_MULTIPLE_NODES */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_MMZONE_H_ */ diff --git a/include/asm-powerpc/module.h b/include/asm-powerpc/module.h deleted file mode 100644 index e5f14b13ccf0..000000000000 --- a/include/asm-powerpc/module.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _ASM_POWERPC_MODULE_H -#define _ASM_POWERPC_MODULE_H -#ifdef __KERNEL__ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include - - -#ifndef __powerpc64__ -/* - * Thanks to Paul M for explaining this. - * - * PPC can only do rel jumps += 32MB, and often the kernel and other - * modules are furthur away than this. So, we jump to a table of - * trampolines attached to the module (the Procedure Linkage Table) - * whenever that happens. - */ - -struct ppc_plt_entry { - /* 16 byte jump instruction sequence (4 instructions) */ - unsigned int jump[4]; -}; -#endif /* __powerpc64__ */ - - -struct mod_arch_specific { -#ifdef __powerpc64__ - unsigned int stubs_section; /* Index of stubs section in module */ - unsigned int toc_section; /* What section is the TOC? */ -#else - /* Indices of PLT sections within module. */ - unsigned int core_plt_section; - unsigned int init_plt_section; -#endif - - /* List of BUG addresses, source line numbers and filenames */ - struct list_head bug_list; - struct bug_entry *bug_table; - unsigned int num_bugs; -}; - -/* - * Select ELF headers. - * Make empty section for module_frob_arch_sections to expand. - */ - -#ifdef __powerpc64__ -# define Elf_Shdr Elf64_Shdr -# define Elf_Sym Elf64_Sym -# define Elf_Ehdr Elf64_Ehdr -# ifdef MODULE - asm(".section .stubs,\"ax\",@nobits; .align 3; .previous"); -# endif -#else -# define Elf_Shdr Elf32_Shdr -# define Elf_Sym Elf32_Sym -# define Elf_Ehdr Elf32_Ehdr -# ifdef MODULE - asm(".section .plt,\"ax\",@nobits; .align 3; .previous"); - asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous"); -# endif /* MODULE */ -#endif - - -struct exception_table_entry; -void sort_ex_table(struct exception_table_entry *start, - struct exception_table_entry *finish); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_MODULE_H */ diff --git a/include/asm-powerpc/mpc512x.h b/include/asm-powerpc/mpc512x.h deleted file mode 100644 index c48a1658eeac..000000000000 --- a/include/asm-powerpc/mpc512x.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. - * - * Author: John Rigby, , Friday Apr 13 2007 - * - * Description: - * MPC5121 Prototypes and definitions - * - * This is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_POWERPC_MPC512x_H__ -#define __ASM_POWERPC_MPC512x_H__ - -extern unsigned long mpc512x_find_ips_freq(struct device_node *node); - -#endif /* __ASM_POWERPC_MPC512x_H__ */ - diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h deleted file mode 100644 index 81ef10b6b672..000000000000 --- a/include/asm-powerpc/mpc52xx.h +++ /dev/null @@ -1,295 +0,0 @@ -/* - * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips - * May need to be cleaned as the port goes on ... - * - * Copyright (C) 2004-2005 Sylvain Munaut - * Copyright (C) 2003 MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef __ASM_POWERPC_MPC52xx_H__ -#define __ASM_POWERPC_MPC52xx_H__ - -#ifndef __ASSEMBLY__ -#include -#include -#endif /* __ASSEMBLY__ */ - -#include - -/* Variants of the 5200(B) */ -#define MPC5200_SVR 0x80110010 -#define MPC5200_SVR_MASK 0xfffffff0 -#define MPC5200B_SVR 0x80110020 -#define MPC5200B_SVR_MASK 0xfffffff0 - -/* ======================================================================== */ -/* Structures mapping of some unit register set */ -/* ======================================================================== */ - -#ifndef __ASSEMBLY__ - -/* Memory Mapping Control */ -struct mpc52xx_mmap_ctl { - u32 mbar; /* MMAP_CTRL + 0x00 */ - - u32 cs0_start; /* MMAP_CTRL + 0x04 */ - u32 cs0_stop; /* MMAP_CTRL + 0x08 */ - u32 cs1_start; /* MMAP_CTRL + 0x0c */ - u32 cs1_stop; /* MMAP_CTRL + 0x10 */ - u32 cs2_start; /* MMAP_CTRL + 0x14 */ - u32 cs2_stop; /* MMAP_CTRL + 0x18 */ - u32 cs3_start; /* MMAP_CTRL + 0x1c */ - u32 cs3_stop; /* MMAP_CTRL + 0x20 */ - u32 cs4_start; /* MMAP_CTRL + 0x24 */ - u32 cs4_stop; /* MMAP_CTRL + 0x28 */ - u32 cs5_start; /* MMAP_CTRL + 0x2c */ - u32 cs5_stop; /* MMAP_CTRL + 0x30 */ - - u32 sdram0; /* MMAP_CTRL + 0x34 */ - u32 sdram1; /* MMAP_CTRL + 0X38 */ - - u32 reserved[4]; /* MMAP_CTRL + 0x3c .. 0x48 */ - - u32 boot_start; /* MMAP_CTRL + 0x4c */ - u32 boot_stop; /* MMAP_CTRL + 0x50 */ - - u32 ipbi_ws_ctrl; /* MMAP_CTRL + 0x54 */ - - u32 cs6_start; /* MMAP_CTRL + 0x58 */ - u32 cs6_stop; /* MMAP_CTRL + 0x5c */ - u32 cs7_start; /* MMAP_CTRL + 0x60 */ - u32 cs7_stop; /* MMAP_CTRL + 0x64 */ -}; - -/* SDRAM control */ -struct mpc52xx_sdram { - u32 mode; /* SDRAM + 0x00 */ - u32 ctrl; /* SDRAM + 0x04 */ - u32 config1; /* SDRAM + 0x08 */ - u32 config2; /* SDRAM + 0x0c */ -}; - -/* SDMA */ -struct mpc52xx_sdma { - u32 taskBar; /* SDMA + 0x00 */ - u32 currentPointer; /* SDMA + 0x04 */ - u32 endPointer; /* SDMA + 0x08 */ - u32 variablePointer; /* SDMA + 0x0c */ - - u8 IntVect1; /* SDMA + 0x10 */ - u8 IntVect2; /* SDMA + 0x11 */ - u16 PtdCntrl; /* SDMA + 0x12 */ - - u32 IntPend; /* SDMA + 0x14 */ - u32 IntMask; /* SDMA + 0x18 */ - - u16 tcr[16]; /* SDMA + 0x1c .. 0x3a */ - - u8 ipr[32]; /* SDMA + 0x3c .. 0x5b */ - - u32 cReqSelect; /* SDMA + 0x5c */ - u32 task_size0; /* SDMA + 0x60 */ - u32 task_size1; /* SDMA + 0x64 */ - u32 MDEDebug; /* SDMA + 0x68 */ - u32 ADSDebug; /* SDMA + 0x6c */ - u32 Value1; /* SDMA + 0x70 */ - u32 Value2; /* SDMA + 0x74 */ - u32 Control; /* SDMA + 0x78 */ - u32 Status; /* SDMA + 0x7c */ - u32 PTDDebug; /* SDMA + 0x80 */ -}; - -/* GPT */ -struct mpc52xx_gpt { - u32 mode; /* GPTx + 0x00 */ - u32 count; /* GPTx + 0x04 */ - u32 pwm; /* GPTx + 0x08 */ - u32 status; /* GPTx + 0X0c */ -}; - -/* GPIO */ -struct mpc52xx_gpio { - u32 port_config; /* GPIO + 0x00 */ - u32 simple_gpioe; /* GPIO + 0x04 */ - u32 simple_ode; /* GPIO + 0x08 */ - u32 simple_ddr; /* GPIO + 0x0c */ - u32 simple_dvo; /* GPIO + 0x10 */ - u32 simple_ival; /* GPIO + 0x14 */ - u8 outo_gpioe; /* GPIO + 0x18 */ - u8 reserved1[3]; /* GPIO + 0x19 */ - u8 outo_dvo; /* GPIO + 0x1c */ - u8 reserved2[3]; /* GPIO + 0x1d */ - u8 sint_gpioe; /* GPIO + 0x20 */ - u8 reserved3[3]; /* GPIO + 0x21 */ - u8 sint_ode; /* GPIO + 0x24 */ - u8 reserved4[3]; /* GPIO + 0x25 */ - u8 sint_ddr; /* GPIO + 0x28 */ - u8 reserved5[3]; /* GPIO + 0x29 */ - u8 sint_dvo; /* GPIO + 0x2c */ - u8 reserved6[3]; /* GPIO + 0x2d */ - u8 sint_inten; /* GPIO + 0x30 */ - u8 reserved7[3]; /* GPIO + 0x31 */ - u16 sint_itype; /* GPIO + 0x34 */ - u16 reserved8; /* GPIO + 0x36 */ - u8 gpio_control; /* GPIO + 0x38 */ - u8 reserved9[3]; /* GPIO + 0x39 */ - u8 sint_istat; /* GPIO + 0x3c */ - u8 sint_ival; /* GPIO + 0x3d */ - u8 bus_errs; /* GPIO + 0x3e */ - u8 reserved10; /* GPIO + 0x3f */ -}; - -#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD 4 -#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5 -#define MPC52xx_GPIO_PCI_DIS (1<<15) - -/* GPIO with WakeUp*/ -struct mpc52xx_gpio_wkup { - u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */ - u8 reserved1[3]; /* GPIO_WKUP + 0x03 */ - u8 wkup_ode; /* GPIO_WKUP + 0x04 */ - u8 reserved2[3]; /* GPIO_WKUP + 0x05 */ - u8 wkup_ddr; /* GPIO_WKUP + 0x08 */ - u8 reserved3[3]; /* GPIO_WKUP + 0x09 */ - u8 wkup_dvo; /* GPIO_WKUP + 0x0C */ - u8 reserved4[3]; /* GPIO_WKUP + 0x0D */ - u8 wkup_inten; /* GPIO_WKUP + 0x10 */ - u8 reserved5[3]; /* GPIO_WKUP + 0x11 */ - u8 wkup_iinten; /* GPIO_WKUP + 0x14 */ - u8 reserved6[3]; /* GPIO_WKUP + 0x15 */ - u16 wkup_itype; /* GPIO_WKUP + 0x18 */ - u8 reserved7[2]; /* GPIO_WKUP + 0x1A */ - u8 wkup_maste; /* GPIO_WKUP + 0x1C */ - u8 reserved8[3]; /* GPIO_WKUP + 0x1D */ - u8 wkup_ival; /* GPIO_WKUP + 0x20 */ - u8 reserved9[3]; /* GPIO_WKUP + 0x21 */ - u8 wkup_istat; /* GPIO_WKUP + 0x24 */ - u8 reserved10[3]; /* GPIO_WKUP + 0x25 */ -}; - -/* XLB Bus control */ -struct mpc52xx_xlb { - u8 reserved[0x40]; - u32 config; /* XLB + 0x40 */ - u32 version; /* XLB + 0x44 */ - u32 status; /* XLB + 0x48 */ - u32 int_enable; /* XLB + 0x4c */ - u32 addr_capture; /* XLB + 0x50 */ - u32 bus_sig_capture; /* XLB + 0x54 */ - u32 addr_timeout; /* XLB + 0x58 */ - u32 data_timeout; /* XLB + 0x5c */ - u32 bus_act_timeout; /* XLB + 0x60 */ - u32 master_pri_enable; /* XLB + 0x64 */ - u32 master_priority; /* XLB + 0x68 */ - u32 base_address; /* XLB + 0x6c */ - u32 snoop_window; /* XLB + 0x70 */ -}; - -#define MPC52xx_XLB_CFG_PLDIS (1 << 31) -#define MPC52xx_XLB_CFG_SNOOP (1 << 15) - -/* Clock Distribution control */ -struct mpc52xx_cdm { - u32 jtag_id; /* CDM + 0x00 reg0 read only */ - u32 rstcfg; /* CDM + 0x04 reg1 read only */ - u32 breadcrumb; /* CDM + 0x08 reg2 */ - - u8 mem_clk_sel; /* CDM + 0x0c reg3 byte0 */ - u8 xlb_clk_sel; /* CDM + 0x0d reg3 byte1 read only */ - u8 ipb_clk_sel; /* CDM + 0x0e reg3 byte2 */ - u8 pci_clk_sel; /* CDM + 0x0f reg3 byte3 */ - - u8 ext_48mhz_en; /* CDM + 0x10 reg4 byte0 */ - u8 fd_enable; /* CDM + 0x11 reg4 byte1 */ - u16 fd_counters; /* CDM + 0x12 reg4 byte2,3 */ - - u32 clk_enables; /* CDM + 0x14 reg5 */ - - u8 osc_disable; /* CDM + 0x18 reg6 byte0 */ - u8 reserved0[3]; /* CDM + 0x19 reg6 byte1,2,3 */ - - u8 ccs_sleep_enable; /* CDM + 0x1c reg7 byte0 */ - u8 osc_sleep_enable; /* CDM + 0x1d reg7 byte1 */ - u8 reserved1; /* CDM + 0x1e reg7 byte2 */ - u8 ccs_qreq_test; /* CDM + 0x1f reg7 byte3 */ - - u8 soft_reset; /* CDM + 0x20 u8 byte0 */ - u8 no_ckstp; /* CDM + 0x21 u8 byte0 */ - u8 reserved2[2]; /* CDM + 0x22 u8 byte1,2,3 */ - - u8 pll_lock; /* CDM + 0x24 reg9 byte0 */ - u8 pll_looselock; /* CDM + 0x25 reg9 byte1 */ - u8 pll_sm_lockwin; /* CDM + 0x26 reg9 byte2 */ - u8 reserved3; /* CDM + 0x27 reg9 byte3 */ - - u16 reserved4; /* CDM + 0x28 reg10 byte0,1 */ - u16 mclken_div_psc1; /* CDM + 0x2a reg10 byte2,3 */ - - u16 reserved5; /* CDM + 0x2c reg11 byte0,1 */ - u16 mclken_div_psc2; /* CDM + 0x2e reg11 byte2,3 */ - - u16 reserved6; /* CDM + 0x30 reg12 byte0,1 */ - u16 mclken_div_psc3; /* CDM + 0x32 reg12 byte2,3 */ - - u16 reserved7; /* CDM + 0x34 reg13 byte0,1 */ - u16 mclken_div_psc6; /* CDM + 0x36 reg13 byte2,3 */ -}; - -#endif /* __ASSEMBLY__ */ - - -/* ========================================================================= */ -/* Prototypes for MPC52xx sysdev */ -/* ========================================================================= */ - -#ifndef __ASSEMBLY__ - -/* mpc52xx_common.c */ -extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node); -extern void mpc5200_setup_xlb_arbiter(void); -extern void mpc52xx_declare_of_platform_devices(void); -extern void mpc52xx_map_common_devices(void); -extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv); -extern void mpc52xx_restart(char *cmd); - -/* mpc52xx_pic.c */ -extern void mpc52xx_init_irq(void); -extern unsigned int mpc52xx_get_irq(void); - -/* mpc52xx_pci.c */ -#ifdef CONFIG_PCI -extern int __init mpc52xx_add_bridge(struct device_node *node); -extern void __init mpc52xx_setup_pci(void); -#else -static inline void mpc52xx_setup_pci(void) { } -#endif - -#endif /* __ASSEMBLY__ */ - -#ifdef CONFIG_PM -struct mpc52xx_suspend { - void (*board_suspend_prepare)(void __iomem *mbar); - void (*board_resume_finish)(void __iomem *mbar); -}; - -extern struct mpc52xx_suspend mpc52xx_suspend; -extern int __init mpc52xx_pm_init(void); -extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level); - -#ifdef CONFIG_PPC_LITE5200 -extern int __init lite5200_pm_init(void); - -/* lite5200 calls mpc5200 suspend functions, so here they are */ -extern int mpc52xx_pm_prepare(void); -extern int mpc52xx_pm_enter(suspend_state_t); -extern void mpc52xx_pm_finish(void); -extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */ -#endif -#endif /* CONFIG_PM */ - -#endif /* __ASM_POWERPC_MPC52xx_H__ */ - diff --git a/include/asm-powerpc/mpc52xx_psc.h b/include/asm-powerpc/mpc52xx_psc.h deleted file mode 100644 index 8917ed630565..000000000000 --- a/include/asm-powerpc/mpc52xx_psc.h +++ /dev/null @@ -1,276 +0,0 @@ -/* - * include/asm-ppc/mpc52xx_psc.h - * - * Definitions of consts/structs to drive the Freescale MPC52xx OnChip - * PSCs. Theses are shared between multiple drivers since a PSC can be - * UART, AC97, IR, I2S, ... So this header is in asm-ppc. - * - * - * Maintainer : Sylvain Munaut - * - * Based/Extracted from some header of the 2.4 originally written by - * Dale Farnsworth - * - * Copyright (C) 2004 Sylvain Munaut - * Copyright (C) 2003 MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef __ASM_MPC52xx_PSC_H__ -#define __ASM_MPC52xx_PSC_H__ - -#include - -/* Max number of PSCs */ -#define MPC52xx_PSC_MAXNUM 6 - -/* Programmable Serial Controller (PSC) status register bits */ -#define MPC52xx_PSC_SR_CDE 0x0080 -#define MPC52xx_PSC_SR_RXRDY 0x0100 -#define MPC52xx_PSC_SR_RXFULL 0x0200 -#define MPC52xx_PSC_SR_TXRDY 0x0400 -#define MPC52xx_PSC_SR_TXEMP 0x0800 -#define MPC52xx_PSC_SR_OE 0x1000 -#define MPC52xx_PSC_SR_PE 0x2000 -#define MPC52xx_PSC_SR_FE 0x4000 -#define MPC52xx_PSC_SR_RB 0x8000 - -/* PSC Command values */ -#define MPC52xx_PSC_RX_ENABLE 0x0001 -#define MPC52xx_PSC_RX_DISABLE 0x0002 -#define MPC52xx_PSC_TX_ENABLE 0x0004 -#define MPC52xx_PSC_TX_DISABLE 0x0008 -#define MPC52xx_PSC_SEL_MODE_REG_1 0x0010 -#define MPC52xx_PSC_RST_RX 0x0020 -#define MPC52xx_PSC_RST_TX 0x0030 -#define MPC52xx_PSC_RST_ERR_STAT 0x0040 -#define MPC52xx_PSC_RST_BRK_CHG_INT 0x0050 -#define MPC52xx_PSC_START_BRK 0x0060 -#define MPC52xx_PSC_STOP_BRK 0x0070 - -/* PSC TxRx FIFO status bits */ -#define MPC52xx_PSC_RXTX_FIFO_ERR 0x0040 -#define MPC52xx_PSC_RXTX_FIFO_UF 0x0020 -#define MPC52xx_PSC_RXTX_FIFO_OF 0x0010 -#define MPC52xx_PSC_RXTX_FIFO_FR 0x0008 -#define MPC52xx_PSC_RXTX_FIFO_FULL 0x0004 -#define MPC52xx_PSC_RXTX_FIFO_ALARM 0x0002 -#define MPC52xx_PSC_RXTX_FIFO_EMPTY 0x0001 - -/* PSC interrupt status/mask bits */ -#define MPC52xx_PSC_IMR_TXRDY 0x0100 -#define MPC52xx_PSC_IMR_RXRDY 0x0200 -#define MPC52xx_PSC_IMR_DB 0x0400 -#define MPC52xx_PSC_IMR_TXEMP 0x0800 -#define MPC52xx_PSC_IMR_ORERR 0x1000 -#define MPC52xx_PSC_IMR_IPC 0x8000 - -/* PSC input port change bit */ -#define MPC52xx_PSC_CTS 0x01 -#define MPC52xx_PSC_DCD 0x02 -#define MPC52xx_PSC_D_CTS 0x10 -#define MPC52xx_PSC_D_DCD 0x20 - -/* PSC mode fields */ -#define MPC52xx_PSC_MODE_5_BITS 0x00 -#define MPC52xx_PSC_MODE_6_BITS 0x01 -#define MPC52xx_PSC_MODE_7_BITS 0x02 -#define MPC52xx_PSC_MODE_8_BITS 0x03 -#define MPC52xx_PSC_MODE_BITS_MASK 0x03 -#define MPC52xx_PSC_MODE_PAREVEN 0x00 -#define MPC52xx_PSC_MODE_PARODD 0x04 -#define MPC52xx_PSC_MODE_PARFORCE 0x08 -#define MPC52xx_PSC_MODE_PARNONE 0x10 -#define MPC52xx_PSC_MODE_ERR 0x20 -#define MPC52xx_PSC_MODE_FFULL 0x40 -#define MPC52xx_PSC_MODE_RXRTS 0x80 - -#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS 0x00 -#define MPC52xx_PSC_MODE_ONE_STOP 0x07 -#define MPC52xx_PSC_MODE_TWO_STOP 0x0f - -#define MPC52xx_PSC_RFNUM_MASK 0x01ff - -#define MPC52xx_PSC_SICR_DTS1 (1 << 29) -#define MPC52xx_PSC_SICR_SHDR (1 << 28) -#define MPC52xx_PSC_SICR_SIM_MASK (0xf << 24) -#define MPC52xx_PSC_SICR_SIM_UART (0x0 << 24) -#define MPC52xx_PSC_SICR_SIM_UART_DCD (0x8 << 24) -#define MPC52xx_PSC_SICR_SIM_CODEC_8 (0x1 << 24) -#define MPC52xx_PSC_SICR_SIM_CODEC_16 (0x2 << 24) -#define MPC52xx_PSC_SICR_SIM_AC97 (0x3 << 24) -#define MPC52xx_PSC_SICR_SIM_SIR (0x8 << 24) -#define MPC52xx_PSC_SICR_SIM_SIR_DCD (0xc << 24) -#define MPC52xx_PSC_SICR_SIM_MIR (0x5 << 24) -#define MPC52xx_PSC_SICR_SIM_FIR (0x6 << 24) -#define MPC52xx_PSC_SICR_SIM_CODEC_24 (0x7 << 24) -#define MPC52xx_PSC_SICR_SIM_CODEC_32 (0xf << 24) -#define MPC52xx_PSC_SICR_GENCLK (1 << 23) -#define MPC52xx_PSC_SICR_I2S (1 << 22) -#define MPC52xx_PSC_SICR_CLKPOL (1 << 21) -#define MPC52xx_PSC_SICR_SYNCPOL (1 << 20) -#define MPC52xx_PSC_SICR_CELLSLAVE (1 << 19) -#define MPC52xx_PSC_SICR_CELL2XCLK (1 << 18) -#define MPC52xx_PSC_SICR_ESAI (1 << 17) -#define MPC52xx_PSC_SICR_ENAC97 (1 << 16) -#define MPC52xx_PSC_SICR_SPI (1 << 15) -#define MPC52xx_PSC_SICR_MSTR (1 << 14) -#define MPC52xx_PSC_SICR_CPOL (1 << 13) -#define MPC52xx_PSC_SICR_CPHA (1 << 12) -#define MPC52xx_PSC_SICR_USEEOF (1 << 11) -#define MPC52xx_PSC_SICR_DISABLEEOF (1 << 10) - -/* Structure of the hardware registers */ -struct mpc52xx_psc { - u8 mode; /* PSC + 0x00 */ - u8 reserved0[3]; - union { /* PSC + 0x04 */ - u16 status; - u16 clock_select; - } sr_csr; -#define mpc52xx_psc_status sr_csr.status -#define mpc52xx_psc_clock_select sr_csr.clock_select - u16 reserved1; - u8 command; /* PSC + 0x08 */ - u8 reserved2[3]; - union { /* PSC + 0x0c */ - u8 buffer_8; - u16 buffer_16; - u32 buffer_32; - } buffer; -#define mpc52xx_psc_buffer_8 buffer.buffer_8 -#define mpc52xx_psc_buffer_16 buffer.buffer_16 -#define mpc52xx_psc_buffer_32 buffer.buffer_32 - union { /* PSC + 0x10 */ - u8 ipcr; - u8 acr; - } ipcr_acr; -#define mpc52xx_psc_ipcr ipcr_acr.ipcr -#define mpc52xx_psc_acr ipcr_acr.acr - u8 reserved3[3]; - union { /* PSC + 0x14 */ - u16 isr; - u16 imr; - } isr_imr; -#define mpc52xx_psc_isr isr_imr.isr -#define mpc52xx_psc_imr isr_imr.imr - u16 reserved4; - u8 ctur; /* PSC + 0x18 */ - u8 reserved5[3]; - u8 ctlr; /* PSC + 0x1c */ - u8 reserved6[3]; - /* BitClkDiv field of CCR is byte swapped in - * the hardware for mpc5200/b compatibility */ - u32 ccr; /* PSC + 0x20 */ - u32 ac97_slots; /* PSC + 0x24 */ - u32 ac97_cmd; /* PSC + 0x28 */ - u32 ac97_data; /* PSC + 0x2c */ - u8 ivr; /* PSC + 0x30 */ - u8 reserved8[3]; - u8 ip; /* PSC + 0x34 */ - u8 reserved9[3]; - u8 op1; /* PSC + 0x38 */ - u8 reserved10[3]; - u8 op0; /* PSC + 0x3c */ - u8 reserved11[3]; - u32 sicr; /* PSC + 0x40 */ - u8 ircr1; /* PSC + 0x44 */ - u8 reserved13[3]; - u8 ircr2; /* PSC + 0x44 */ - u8 reserved14[3]; - u8 irsdr; /* PSC + 0x4c */ - u8 reserved15[3]; - u8 irmdr; /* PSC + 0x50 */ - u8 reserved16[3]; - u8 irfdr; /* PSC + 0x54 */ - u8 reserved17[3]; -}; - -struct mpc52xx_psc_fifo { - u16 rfnum; /* PSC + 0x58 */ - u16 reserved18; - u16 tfnum; /* PSC + 0x5c */ - u16 reserved19; - u32 rfdata; /* PSC + 0x60 */ - u16 rfstat; /* PSC + 0x64 */ - u16 reserved20; - u8 rfcntl; /* PSC + 0x68 */ - u8 reserved21[5]; - u16 rfalarm; /* PSC + 0x6e */ - u16 reserved22; - u16 rfrptr; /* PSC + 0x72 */ - u16 reserved23; - u16 rfwptr; /* PSC + 0x76 */ - u16 reserved24; - u16 rflrfptr; /* PSC + 0x7a */ - u16 reserved25; - u16 rflwfptr; /* PSC + 0x7e */ - u32 tfdata; /* PSC + 0x80 */ - u16 tfstat; /* PSC + 0x84 */ - u16 reserved26; - u8 tfcntl; /* PSC + 0x88 */ - u8 reserved27[5]; - u16 tfalarm; /* PSC + 0x8e */ - u16 reserved28; - u16 tfrptr; /* PSC + 0x92 */ - u16 reserved29; - u16 tfwptr; /* PSC + 0x96 */ - u16 reserved30; - u16 tflrfptr; /* PSC + 0x9a */ - u16 reserved31; - u16 tflwfptr; /* PSC + 0x9e */ -}; - -#define MPC512x_PSC_FIFO_RESET_SLICE 0x80 -#define MPC512x_PSC_FIFO_ENABLE_SLICE 0x01 -#define MPC512x_PSC_FIFO_ENABLE_DMA 0x04 - -#define MPC512x_PSC_FIFO_EMPTY 0x1 -#define MPC512x_PSC_FIFO_FULL 0x2 -#define MPC512x_PSC_FIFO_ALARM 0x4 -#define MPC512x_PSC_FIFO_URERR 0x8 -#define MPC512x_PSC_FIFO_ORERR 0x01 -#define MPC512x_PSC_FIFO_MEMERROR 0x02 - -struct mpc512x_psc_fifo { - u32 reserved1[10]; - u32 txcmd; /* PSC + 0x80 */ - u32 txalarm; /* PSC + 0x84 */ - u32 txsr; /* PSC + 0x88 */ - u32 txisr; /* PSC + 0x8c */ - u32 tximr; /* PSC + 0x90 */ - u32 txcnt; /* PSC + 0x94 */ - u32 txptr; /* PSC + 0x98 */ - u32 txsz; /* PSC + 0x9c */ - u32 reserved2[7]; - union { - u8 txdata_8; - u16 txdata_16; - u32 txdata_32; - } txdata; /* PSC + 0xbc */ -#define txdata_8 txdata.txdata_8 -#define txdata_16 txdata.txdata_16 -#define txdata_32 txdata.txdata_32 - u32 rxcmd; /* PSC + 0xc0 */ - u32 rxalarm; /* PSC + 0xc4 */ - u32 rxsr; /* PSC + 0xc8 */ - u32 rxisr; /* PSC + 0xcc */ - u32 rximr; /* PSC + 0xd0 */ - u32 rxcnt; /* PSC + 0xd4 */ - u32 rxptr; /* PSC + 0xd8 */ - u32 rxsz; /* PSC + 0xdc */ - u32 reserved3[7]; - union { - u8 rxdata_8; - u16 rxdata_16; - u32 rxdata_32; - } rxdata; /* PSC + 0xfc */ -#define rxdata_8 rxdata.rxdata_8 -#define rxdata_16 rxdata.rxdata_16 -#define rxdata_32 rxdata.rxdata_32 -}; - -#endif /* __ASM_MPC52xx_PSC_H__ */ diff --git a/include/asm-powerpc/mpc6xx.h b/include/asm-powerpc/mpc6xx.h deleted file mode 100644 index effc2291beb2..000000000000 --- a/include/asm-powerpc/mpc6xx.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_POWERPC_MPC6xx_H -#define __ASM_POWERPC_MPC6xx_H - -void mpc6xx_enter_standby(void); - -#endif diff --git a/include/asm-powerpc/mpc8260.h b/include/asm-powerpc/mpc8260.h deleted file mode 100644 index 03317e1e6185..000000000000 --- a/include/asm-powerpc/mpc8260.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Since there are many different boards and no standard configuration, - * we have a unique include file for each. Rather than change every - * file that has to include MPC8260 configuration, they all include - * this one and the configuration switching is done here. - */ -#ifdef __KERNEL__ -#ifndef __ASM_POWERPC_MPC8260_H__ -#define __ASM_POWERPC_MPC8260_H__ - -#define MPC82XX_BCR_PLDP 0x00800000 /* Pipeline Maximum Depth */ - -#ifdef CONFIG_8260 - -#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS) -#include -#endif - -#ifdef CONFIG_PCI_8260 -#include -#endif - -#endif /* CONFIG_8260 */ -#endif /* !__ASM_POWERPC_MPC8260_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/mpc86xx.h b/include/asm-powerpc/mpc86xx.h deleted file mode 100644 index 15f650f987e7..000000000000 --- a/include/asm-powerpc/mpc86xx.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * MPC86xx definitions - * - * Author: Jeff Brown - * - * Copyright 2004 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_POWERPC_MPC86xx_H__ -#define __ASM_POWERPC_MPC86xx_H__ - -#include - -#ifdef CONFIG_PPC_86xx - -#define CPU0_BOOT_RELEASE 0x01000000 -#define CPU1_BOOT_RELEASE 0x02000000 -#define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE) -#define MCM_PORT_CONFIG_OFFSET 0x1010 - -/* Offset from CCSRBAR */ -#define MPC86xx_MCM_OFFSET (0x00000) -#define MPC86xx_MCM_SIZE (0x02000) - -#endif /* CONFIG_PPC_86xx */ -#endif /* __ASM_POWERPC_MPC86xx_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/mpc8xx.h b/include/asm-powerpc/mpc8xx.h deleted file mode 100644 index 98f3c4f17328..000000000000 --- a/include/asm-powerpc/mpc8xx.h +++ /dev/null @@ -1,12 +0,0 @@ -/* This is the single file included by all MPC8xx build options. - * Since there are many different boards and no standard configuration, - * we have a unique include file for each. Rather than change every - * file that has to include MPC8xx configuration, they all include - * this one and the configuration switching is done here. - */ -#ifndef __CONFIG_8xx_DEFS -#define __CONFIG_8xx_DEFS - -extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops; - -#endif /* __CONFIG_8xx_DEFS */ diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h deleted file mode 100644 index fe566a348a86..000000000000 --- a/include/asm-powerpc/mpic.h +++ /dev/null @@ -1,481 +0,0 @@ -#ifndef _ASM_POWERPC_MPIC_H -#define _ASM_POWERPC_MPIC_H -#ifdef __KERNEL__ - -#include -#include -#include - -/* - * Global registers - */ - -#define MPIC_GREG_BASE 0x01000 - -#define MPIC_GREG_FEATURE_0 0x00000 -#define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000 -#define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16 -#define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00 -#define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8 -#define MPIC_GREG_FEATURE_VERSION_MASK 0xff -#define MPIC_GREG_FEATURE_1 0x00010 -#define MPIC_GREG_GLOBAL_CONF_0 0x00020 -#define MPIC_GREG_GCONF_RESET 0x80000000 -#define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 -#define MPIC_GREG_GCONF_NO_BIAS 0x10000000 -#define MPIC_GREG_GCONF_BASE_MASK 0x000fffff -#define MPIC_GREG_GCONF_MCK 0x08000000 -#define MPIC_GREG_GLOBAL_CONF_1 0x00030 -#define MPIC_GREG_GLOBAL_CONF_1_SIE 0x08000000 -#define MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK 0x70000000 -#define MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(r) \ - (((r) << 28) & MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK) -#define MPIC_GREG_VENDOR_0 0x00040 -#define MPIC_GREG_VENDOR_1 0x00050 -#define MPIC_GREG_VENDOR_2 0x00060 -#define MPIC_GREG_VENDOR_3 0x00070 -#define MPIC_GREG_VENDOR_ID 0x00080 -#define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000 -#define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16 -#define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00 -#define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8 -#define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff -#define MPIC_GREG_PROCESSOR_INIT 0x00090 -#define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0 -#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0 -#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0 -#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0 -#define MPIC_GREG_IPI_STRIDE 0x10 -#define MPIC_GREG_SPURIOUS 0x000e0 -#define MPIC_GREG_TIMER_FREQ 0x000f0 - -/* - * - * Timer registers - */ -#define MPIC_TIMER_BASE 0x01100 -#define MPIC_TIMER_STRIDE 0x40 - -#define MPIC_TIMER_CURRENT_CNT 0x00000 -#define MPIC_TIMER_BASE_CNT 0x00010 -#define MPIC_TIMER_VECTOR_PRI 0x00020 -#define MPIC_TIMER_DESTINATION 0x00030 - -/* - * Per-Processor registers - */ - -#define MPIC_CPU_THISBASE 0x00000 -#define MPIC_CPU_BASE 0x20000 -#define MPIC_CPU_STRIDE 0x01000 - -#define MPIC_CPU_IPI_DISPATCH_0 0x00040 -#define MPIC_CPU_IPI_DISPATCH_1 0x00050 -#define MPIC_CPU_IPI_DISPATCH_2 0x00060 -#define MPIC_CPU_IPI_DISPATCH_3 0x00070 -#define MPIC_CPU_IPI_DISPATCH_STRIDE 0x00010 -#define MPIC_CPU_CURRENT_TASK_PRI 0x00080 -#define MPIC_CPU_TASKPRI_MASK 0x0000000f -#define MPIC_CPU_WHOAMI 0x00090 -#define MPIC_CPU_WHOAMI_MASK 0x0000001f -#define MPIC_CPU_INTACK 0x000a0 -#define MPIC_CPU_EOI 0x000b0 -#define MPIC_CPU_MCACK 0x000c0 - -/* - * Per-source registers - */ - -#define MPIC_IRQ_BASE 0x10000 -#define MPIC_IRQ_STRIDE 0x00020 -#define MPIC_IRQ_VECTOR_PRI 0x00000 -#define MPIC_VECPRI_MASK 0x80000000 -#define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */ -#define MPIC_VECPRI_PRIORITY_MASK 0x000f0000 -#define MPIC_VECPRI_PRIORITY_SHIFT 16 -#define MPIC_VECPRI_VECTOR_MASK 0x000007ff -#define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000 -#define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000 -#define MPIC_VECPRI_POLARITY_MASK 0x00800000 -#define MPIC_VECPRI_SENSE_LEVEL 0x00400000 -#define MPIC_VECPRI_SENSE_EDGE 0x00000000 -#define MPIC_VECPRI_SENSE_MASK 0x00400000 -#define MPIC_IRQ_DESTINATION 0x00010 - -#define MPIC_MAX_IRQ_SOURCES 2048 -#define MPIC_MAX_CPUS 32 -#define MPIC_MAX_ISU 32 - -/* - * Tsi108 implementation of MPIC has many differences from the original one - */ - -/* - * Global registers - */ - -#define TSI108_GREG_BASE 0x00000 -#define TSI108_GREG_FEATURE_0 0x00000 -#define TSI108_GREG_GLOBAL_CONF_0 0x00004 -#define TSI108_GREG_VENDOR_ID 0x0000c -#define TSI108_GREG_IPI_VECTOR_PRI_0 0x00204 /* Doorbell 0 */ -#define TSI108_GREG_IPI_STRIDE 0x0c -#define TSI108_GREG_SPURIOUS 0x00010 -#define TSI108_GREG_TIMER_FREQ 0x00014 - -/* - * Timer registers - */ -#define TSI108_TIMER_BASE 0x0030 -#define TSI108_TIMER_STRIDE 0x10 -#define TSI108_TIMER_CURRENT_CNT 0x00000 -#define TSI108_TIMER_BASE_CNT 0x00004 -#define TSI108_TIMER_VECTOR_PRI 0x00008 -#define TSI108_TIMER_DESTINATION 0x0000c - -/* - * Per-Processor registers - */ -#define TSI108_CPU_BASE 0x00300 -#define TSI108_CPU_STRIDE 0x00040 -#define TSI108_CPU_IPI_DISPATCH_0 0x00200 -#define TSI108_CPU_IPI_DISPATCH_STRIDE 0x00000 -#define TSI108_CPU_CURRENT_TASK_PRI 0x00000 -#define TSI108_CPU_WHOAMI 0xffffffff -#define TSI108_CPU_INTACK 0x00004 -#define TSI108_CPU_EOI 0x00008 -#define TSI108_CPU_MCACK 0x00004 /* Doesn't really exist here */ - -/* - * Per-source registers - */ -#define TSI108_IRQ_BASE 0x00100 -#define TSI108_IRQ_STRIDE 0x00008 -#define TSI108_IRQ_VECTOR_PRI 0x00000 -#define TSI108_VECPRI_VECTOR_MASK 0x000000ff -#define TSI108_VECPRI_POLARITY_POSITIVE 0x01000000 -#define TSI108_VECPRI_POLARITY_NEGATIVE 0x00000000 -#define TSI108_VECPRI_SENSE_LEVEL 0x02000000 -#define TSI108_VECPRI_SENSE_EDGE 0x00000000 -#define TSI108_VECPRI_POLARITY_MASK 0x01000000 -#define TSI108_VECPRI_SENSE_MASK 0x02000000 -#define TSI108_IRQ_DESTINATION 0x00004 - -/* weird mpic register indices and mask bits in the HW info array */ -enum { - MPIC_IDX_GREG_BASE = 0, - MPIC_IDX_GREG_FEATURE_0, - MPIC_IDX_GREG_GLOBAL_CONF_0, - MPIC_IDX_GREG_VENDOR_ID, - MPIC_IDX_GREG_IPI_VECTOR_PRI_0, - MPIC_IDX_GREG_IPI_STRIDE, - MPIC_IDX_GREG_SPURIOUS, - MPIC_IDX_GREG_TIMER_FREQ, - - MPIC_IDX_TIMER_BASE, - MPIC_IDX_TIMER_STRIDE, - MPIC_IDX_TIMER_CURRENT_CNT, - MPIC_IDX_TIMER_BASE_CNT, - MPIC_IDX_TIMER_VECTOR_PRI, - MPIC_IDX_TIMER_DESTINATION, - - MPIC_IDX_CPU_BASE, - MPIC_IDX_CPU_STRIDE, - MPIC_IDX_CPU_IPI_DISPATCH_0, - MPIC_IDX_CPU_IPI_DISPATCH_STRIDE, - MPIC_IDX_CPU_CURRENT_TASK_PRI, - MPIC_IDX_CPU_WHOAMI, - MPIC_IDX_CPU_INTACK, - MPIC_IDX_CPU_EOI, - MPIC_IDX_CPU_MCACK, - - MPIC_IDX_IRQ_BASE, - MPIC_IDX_IRQ_STRIDE, - MPIC_IDX_IRQ_VECTOR_PRI, - - MPIC_IDX_VECPRI_VECTOR_MASK, - MPIC_IDX_VECPRI_POLARITY_POSITIVE, - MPIC_IDX_VECPRI_POLARITY_NEGATIVE, - MPIC_IDX_VECPRI_SENSE_LEVEL, - MPIC_IDX_VECPRI_SENSE_EDGE, - MPIC_IDX_VECPRI_POLARITY_MASK, - MPIC_IDX_VECPRI_SENSE_MASK, - MPIC_IDX_IRQ_DESTINATION, - MPIC_IDX_END -}; - - -#ifdef CONFIG_MPIC_U3_HT_IRQS -/* Fixup table entry */ -struct mpic_irq_fixup -{ - u8 __iomem *base; - u8 __iomem *applebase; - u32 data; - unsigned int index; -}; -#endif /* CONFIG_MPIC_U3_HT_IRQS */ - - -enum mpic_reg_type { - mpic_access_mmio_le, - mpic_access_mmio_be, -#ifdef CONFIG_PPC_DCR - mpic_access_dcr -#endif -}; - -struct mpic_reg_bank { - u32 __iomem *base; -#ifdef CONFIG_PPC_DCR - dcr_host_t dhost; -#endif /* CONFIG_PPC_DCR */ -}; - -struct mpic_irq_save { - u32 vecprio, - dest; -#ifdef CONFIG_MPIC_U3_HT_IRQS - u32 fixup_data; -#endif -}; - -/* The instance data of a given MPIC */ -struct mpic -{ - /* The remapper for this MPIC */ - struct irq_host *irqhost; - - /* The "linux" controller struct */ - struct irq_chip hc_irq; -#ifdef CONFIG_MPIC_U3_HT_IRQS - struct irq_chip hc_ht_irq; -#endif -#ifdef CONFIG_SMP - struct irq_chip hc_ipi; -#endif - const char *name; - /* Flags */ - unsigned int flags; - /* How many irq sources in a given ISU */ - unsigned int isu_size; - unsigned int isu_shift; - unsigned int isu_mask; - unsigned int irq_count; - /* Number of sources */ - unsigned int num_sources; - /* Number of CPUs */ - unsigned int num_cpus; - /* default senses array */ - unsigned char *senses; - unsigned int senses_count; - - /* vector numbers used for internal sources (ipi/timers) */ - unsigned int ipi_vecs[4]; - unsigned int timer_vecs[4]; - - /* Spurious vector to program into unused sources */ - unsigned int spurious_vec; - -#ifdef CONFIG_MPIC_U3_HT_IRQS - /* The fixup table */ - struct mpic_irq_fixup *fixups; - spinlock_t fixup_lock; -#endif - - /* Register access method */ - enum mpic_reg_type reg_type; - - /* The various ioremap'ed bases */ - struct mpic_reg_bank gregs; - struct mpic_reg_bank tmregs; - struct mpic_reg_bank cpuregs[MPIC_MAX_CPUS]; - struct mpic_reg_bank isus[MPIC_MAX_ISU]; - - /* Protected sources */ - unsigned long *protected; - -#ifdef CONFIG_MPIC_WEIRD - /* Pointer to HW info array */ - u32 *hw_set; -#endif - -#ifdef CONFIG_PCI_MSI - spinlock_t bitmap_lock; - unsigned long *hwirq_bitmap; -#endif - -#ifdef CONFIG_MPIC_BROKEN_REGREAD - u32 isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES]; -#endif - - /* link */ - struct mpic *next; - - struct sys_device sysdev; - -#ifdef CONFIG_PM - struct mpic_irq_save *save_data; -#endif -}; - -/* - * MPIC flags (passed to mpic_alloc) - * - * The top 4 bits contain an MPIC bhw id that is used to index the - * register offsets and some masks when CONFIG_MPIC_WEIRD is set. - * Note setting any ID (leaving those bits to 0) means standard MPIC - */ - -/* This is the primary controller, only that one has IPIs and - * has afinity control. A non-primary MPIC always uses CPU0 - * registers only - */ -#define MPIC_PRIMARY 0x00000001 - -/* Set this for a big-endian MPIC */ -#define MPIC_BIG_ENDIAN 0x00000002 -/* Broken U3 MPIC */ -#define MPIC_U3_HT_IRQS 0x00000004 -/* Broken IPI registers (autodetected) */ -#define MPIC_BROKEN_IPI 0x00000008 -/* MPIC wants a reset */ -#define MPIC_WANTS_RESET 0x00000010 -/* Spurious vector requires EOI */ -#define MPIC_SPV_EOI 0x00000020 -/* No passthrough disable */ -#define MPIC_NO_PTHROU_DIS 0x00000040 -/* DCR based MPIC */ -#define MPIC_USES_DCR 0x00000080 -/* MPIC has 11-bit vector fields (or larger) */ -#define MPIC_LARGE_VECTORS 0x00000100 -/* Enable delivery of prio 15 interrupts as MCK instead of EE */ -#define MPIC_ENABLE_MCK 0x00000200 -/* Disable bias among target selection, spread interrupts evenly */ -#define MPIC_NO_BIAS 0x00000400 -/* Ignore NIRQS as reported by FRR */ -#define MPIC_BROKEN_FRR_NIRQS 0x00000800 - -/* MPIC HW modification ID */ -#define MPIC_REGSET_MASK 0xf0000000 -#define MPIC_REGSET(val) (((val) & 0xf ) << 28) -#define MPIC_GET_REGSET(flags) (((flags) >> 28) & 0xf) - -#define MPIC_REGSET_STANDARD MPIC_REGSET(0) /* Original MPIC */ -#define MPIC_REGSET_TSI108 MPIC_REGSET(1) /* Tsi108/109 PIC */ - -/* Allocate the controller structure and setup the linux irq descs - * for the range if interrupts passed in. No HW initialization is - * actually performed. - * - * @phys_addr: physial base address of the MPIC - * @flags: flags, see constants above - * @isu_size: number of interrupts in an ISU. Use 0 to use a - * standard ISU-less setup (aka powermac) - * @irq_offset: first irq number to assign to this mpic - * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0 - * to match the number of sources - * @ipi_offset: first irq number to assign to this mpic IPI sources, - * used only on primary mpic - * @senses: array of sense values - * @senses_num: number of entries in the array - * - * Note about the sense array. If none is passed, all interrupts are - * setup to be level negative unless MPIC_U3_HT_IRQS is set in which - * case they are edge positive (and the array is ignored anyway). - * The values in the array start at the first source of the MPIC, - * that is senses[0] correspond to linux irq "irq_offset". - */ -extern struct mpic *mpic_alloc(struct device_node *node, - phys_addr_t phys_addr, - unsigned int flags, - unsigned int isu_size, - unsigned int irq_count, - const char *name); - -/* Assign ISUs, to call before mpic_init() - * - * @mpic: controller structure as returned by mpic_alloc() - * @isu_num: ISU number - * @phys_addr: physical address of the ISU - */ -extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, - phys_addr_t phys_addr); - -/* Set default sense codes - * - * @mpic: controller - * @senses: array of sense codes - * @count: size of above array - * - * Optionally provide an array (indexed on hardware interrupt numbers - * for this MPIC) of default sense codes for the chip. Those are linux - * sense codes IRQ_TYPE_* - * - * The driver gets ownership of the pointer, don't dispose of it or - * anything like that. __init only. - */ -extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count); - - -/* Initialize the controller. After this has been called, none of the above - * should be called again for this mpic - */ -extern void mpic_init(struct mpic *mpic); - -/* - * All of the following functions must only be used after the - * ISUs have been assigned and the controller fully initialized - * with mpic_init() - */ - - -/* Change the priority of an interrupt. Default is 8 for irqs and - * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the - * IPI number is then the offset'ed (linux irq number mapped to the IPI) - */ -extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri); - -/* Setup a non-boot CPU */ -extern void mpic_setup_this_cpu(void); - -/* Clean up for kexec (or cpu offline or ...) */ -extern void mpic_teardown_this_cpu(int secondary); - -/* Get the current cpu priority for this cpu (0..15) */ -extern int mpic_cpu_get_priority(void); - -/* Set the current cpu priority for this cpu */ -extern void mpic_cpu_set_priority(int prio); - -/* Request IPIs on primary mpic */ -extern void mpic_request_ipis(void); - -/* Send an IPI (non offseted number 0..3) */ -extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask); - -/* Send a message (IPI) to a given target (cpu number or MSG_*) */ -void smp_mpic_message_pass(int target, int msg); - -/* Unmask a specific virq */ -extern void mpic_unmask_irq(unsigned int irq); -/* Mask a specific virq */ -extern void mpic_mask_irq(unsigned int irq); -/* EOI a specific virq */ -extern void mpic_end_irq(unsigned int irq); - -/* Fetch interrupt from a given mpic */ -extern unsigned int mpic_get_one_irq(struct mpic *mpic); -/* This one gets from the primary mpic */ -extern unsigned int mpic_get_irq(void); -/* Fetch Machine Check interrupt from primary mpic */ -extern unsigned int mpic_get_mcirq(void); - -/* Set the EPIC clock ratio */ -void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio); - -/* Enable/Disable EPIC serial interrupt mode */ -void mpic_set_serial_int(struct mpic *mpic, int enable); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_MPIC_H */ diff --git a/include/asm-powerpc/msgbuf.h b/include/asm-powerpc/msgbuf.h deleted file mode 100644 index dd76743c7537..000000000000 --- a/include/asm-powerpc/msgbuf.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef _ASM_POWERPC_MSGBUF_H -#define _ASM_POWERPC_MSGBUF_H - -/* - * The msqid64_ds structure for the PowerPC architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; -#ifndef __powerpc64__ - unsigned int __unused1; -#endif - __kernel_time_t msg_stime; /* last msgsnd time */ -#ifndef __powerpc64__ - unsigned int __unused2; -#endif - __kernel_time_t msg_rtime; /* last msgrcv time */ -#ifndef __powerpc64__ - unsigned int __unused3; -#endif - __kernel_time_t msg_ctime; /* last change time */ - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASM_POWERPC_MSGBUF_H */ diff --git a/include/asm-powerpc/mutex.h b/include/asm-powerpc/mutex.h deleted file mode 100644 index 458c1f7fbc18..000000000000 --- a/include/asm-powerpc/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/include/asm-powerpc/nvram.h b/include/asm-powerpc/nvram.h deleted file mode 100644 index efde5ac82f7b..000000000000 --- a/include/asm-powerpc/nvram.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * NVRAM definitions and access functions. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_POWERPC_NVRAM_H -#define _ASM_POWERPC_NVRAM_H - -#include - -#define NVRW_CNT 0x20 -#define NVRAM_HEADER_LEN 16 /* sizeof(struct nvram_header) */ -#define NVRAM_BLOCK_LEN 16 -#define NVRAM_MAX_REQ (2080/NVRAM_BLOCK_LEN) -#define NVRAM_MIN_REQ (1056/NVRAM_BLOCK_LEN) - -#define NVRAM_AS0 0x74 -#define NVRAM_AS1 0x75 -#define NVRAM_DATA 0x77 - - -/* RTC Offsets */ - -#define MOTO_RTC_SECONDS 0x1FF9 -#define MOTO_RTC_MINUTES 0x1FFA -#define MOTO_RTC_HOURS 0x1FFB -#define MOTO_RTC_DAY_OF_WEEK 0x1FFC -#define MOTO_RTC_DAY_OF_MONTH 0x1FFD -#define MOTO_RTC_MONTH 0x1FFE -#define MOTO_RTC_YEAR 0x1FFF -#define MOTO_RTC_CONTROLA 0x1FF8 -#define MOTO_RTC_CONTROLB 0x1FF9 - -#define NVRAM_SIG_SP 0x02 /* support processor */ -#define NVRAM_SIG_OF 0x50 /* open firmware config */ -#define NVRAM_SIG_FW 0x51 /* general firmware */ -#define NVRAM_SIG_HW 0x52 /* hardware (VPD) */ -#define NVRAM_SIG_FLIP 0x5a /* Apple flip/flop header */ -#define NVRAM_SIG_APPL 0x5f /* Apple "system" (???) */ -#define NVRAM_SIG_SYS 0x70 /* system env vars */ -#define NVRAM_SIG_CFG 0x71 /* config data */ -#define NVRAM_SIG_ELOG 0x72 /* error log */ -#define NVRAM_SIG_VEND 0x7e /* vendor defined */ -#define NVRAM_SIG_FREE 0x7f /* Free space */ -#define NVRAM_SIG_OS 0xa0 /* OS defined */ -#define NVRAM_SIG_PANIC 0xa1 /* Apple OSX "panic" */ - -/* If change this size, then change the size of NVNAME_LEN */ -struct nvram_header { - unsigned char signature; - unsigned char checksum; - unsigned short length; - char name[12]; -}; - -#ifdef __KERNEL__ - -#include - -struct nvram_partition { - struct list_head partition; - struct nvram_header header; - unsigned int index; -}; - - -extern int nvram_write_error_log(char * buff, int length, - unsigned int err_type, unsigned int err_seq); -extern int nvram_read_error_log(char * buff, int length, - unsigned int * err_type, unsigned int *err_seq); -extern int nvram_clear_error_log(void); -extern struct nvram_partition *nvram_find_partition(int sig, const char *name); - -extern int pSeries_nvram_init(void); - -#ifdef CONFIG_MMIO_NVRAM -extern int mmio_nvram_init(void); -#else -static inline int mmio_nvram_init(void) -{ - return -ENODEV; -} -#endif - -#endif /* __KERNEL__ */ - -/* PowerMac specific nvram stuffs */ - -enum { - pmac_nvram_OF, /* Open Firmware partition */ - pmac_nvram_XPRAM, /* MacOS XPRAM partition */ - pmac_nvram_NR /* MacOS Name Registry partition */ -}; - -#ifdef __KERNEL__ -/* Return partition offset in nvram */ -extern int pmac_get_partition(int partition); - -/* Direct access to XPRAM on PowerMacs */ -extern u8 pmac_xpram_read(int xpaddr); -extern void pmac_xpram_write(int xpaddr, u8 data); - -/* Synchronize NVRAM */ -extern void nvram_sync(void); - -/* Normal access to NVRAM */ -extern unsigned char nvram_read_byte(int i); -extern void nvram_write_byte(unsigned char c, int i); -#endif - -/* Some offsets in XPRAM */ -#define PMAC_XPRAM_MACHINE_LOC 0xe4 -#define PMAC_XPRAM_SOUND_VOLUME 0x08 - -/* Machine location structure in PowerMac XPRAM */ -struct pmac_machine_location { - unsigned int latitude; /* 2+30 bit Fractional number */ - unsigned int longitude; /* 2+30 bit Fractional number */ - unsigned int delta; /* mix of GMT delta and DLS */ -}; - -/* - * /dev/nvram ioctls - * - * Note that PMAC_NVRAM_GET_OFFSET is still supported, but is - * definitely obsolete. Do not use it if you can avoid it - */ - -#define OBSOLETE_PMAC_NVRAM_GET_OFFSET \ - _IOWR('p', 0x40, int) - -#define IOC_NVRAM_GET_OFFSET _IOWR('p', 0x42, int) /* Get NVRAM partition offset */ -#define IOC_NVRAM_SYNC _IO('p', 0x43) /* Sync NVRAM image */ - -#endif /* _ASM_POWERPC_NVRAM_H */ diff --git a/include/asm-powerpc/of_device.h b/include/asm-powerpc/of_device.h deleted file mode 100644 index 3c123990ca2e..000000000000 --- a/include/asm-powerpc/of_device.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _ASM_POWERPC_OF_DEVICE_H -#define _ASM_POWERPC_OF_DEVICE_H -#ifdef __KERNEL__ - -#include -#include - -/* - * The of_device is a kind of "base class" that is a superset of - * struct device for use by devices attached to an OF node and - * probed using OF properties. - */ -struct of_device -{ - struct device_node *node; /* to be obsoleted */ - u64 dma_mask; /* DMA mask */ - struct device dev; /* Generic device interface */ -}; - -extern struct of_device *of_device_alloc(struct device_node *np, - const char *bus_id, - struct device *parent); - -extern int of_device_uevent(struct device *dev, - struct kobj_uevent_env *env); - -/* This is just here during the transition */ -#include - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_OF_DEVICE_H */ diff --git a/include/asm-powerpc/of_platform.h b/include/asm-powerpc/of_platform.h deleted file mode 100644 index 18659ef72139..000000000000 --- a/include/asm-powerpc/of_platform.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASM_POWERPC_OF_PLATFORM_H -#define _ASM_POWERPC_OF_PLATFORM_H -/* - * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -/* This is just here during the transition */ -#include - -/* Platform drivers register/unregister */ -static inline int of_register_platform_driver(struct of_platform_driver *drv) -{ - return of_register_driver(drv, &of_platform_bus_type); -} -static inline void of_unregister_platform_driver(struct of_platform_driver *drv) -{ - of_unregister_driver(drv); -} - -/* Platform devices and busses creation */ -extern struct of_device *of_platform_device_create(struct device_node *np, - const char *bus_id, - struct device *parent); -/* pseudo "matches" value to not do deep probe */ -#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1) - -extern int of_platform_bus_probe(struct device_node *root, - const struct of_device_id *matches, - struct device *parent); - -extern struct of_device *of_find_device_by_phandle(phandle ph); - -extern void of_instantiate_rtc(void); - -#endif /* _ASM_POWERPC_OF_PLATFORM_H */ diff --git a/include/asm-powerpc/ohare.h b/include/asm-powerpc/ohare.h deleted file mode 100644 index 0d030f9dea24..000000000000 --- a/include/asm-powerpc/ohare.h +++ /dev/null @@ -1,54 +0,0 @@ -#ifndef _ASM_POWERPC_OHARE_H -#define _ASM_POWERPC_OHARE_H -#ifdef __KERNEL__ -/* - * ohare.h: definitions for using the "O'Hare" I/O controller chip. - * - * Copyright (C) 1997 Paul Mackerras. - * - * BenH: Changed to match those of heathrow (but not all of them). Please - * check if I didn't break anything (especially the media bay). - */ - -/* offset from ohare base for feature control register */ -#define OHARE_MBCR 0x34 -#define OHARE_FCR 0x38 - -/* - * Bits in feature control register. - * These were mostly derived by experiment on a powerbook 3400 - * and may differ for other machines. - */ -#define OH_SCC_RESET 1 -#define OH_BAY_POWER_N 2 /* a guess */ -#define OH_BAY_PCI_ENABLE 4 /* a guess */ -#define OH_BAY_IDE_ENABLE 8 -#define OH_BAY_FLOPPY_ENABLE 0x10 -#define OH_IDE0_ENABLE 0x20 -#define OH_IDE0_RESET_N 0x40 /* a guess */ -#define OH_BAY_DEV_MASK 0x1c -#define OH_BAY_RESET_N 0x80 -#define OH_IOBUS_ENABLE 0x100 /* IOBUS seems to be IDE */ -#define OH_SCC_ENABLE 0x200 -#define OH_MESH_ENABLE 0x400 -#define OH_FLOPPY_ENABLE 0x800 -#define OH_SCCA_IO 0x4000 -#define OH_SCCB_IO 0x8000 -#define OH_VIA_ENABLE 0x10000 /* Is apparently wrong, to be verified */ -#define OH_IDE1_RESET_N 0x800000 - -/* - * Bits to set in the feature control register on PowerBooks. - */ -#define PBOOK_FEATURES (OH_IDE_ENABLE | OH_SCC_ENABLE | \ - OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO) - -/* - * A magic value to put into the feature control register of the - * "ohare" I/O controller on Starmaxes to enable the IDE CD interface. - * Contributed by Harry Eaton. - */ -#define STARMAX_FEATURES 0xbeff7a - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_OHARE_H */ diff --git a/include/asm-powerpc/oprofile_impl.h b/include/asm-powerpc/oprofile_impl.h deleted file mode 100644 index 95035c602ba6..000000000000 --- a/include/asm-powerpc/oprofile_impl.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * Copyright (C) 2004 Anton Blanchard , IBM - * - * Based on alpha version. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_POWERPC_OPROFILE_IMPL_H -#define _ASM_POWERPC_OPROFILE_IMPL_H -#ifdef __KERNEL__ - -#define OP_MAX_COUNTER 8 - -/* Per-counter configuration as set via oprofilefs. */ -struct op_counter_config { - unsigned long enabled; - unsigned long event; - unsigned long count; - /* Classic doesn't support per-counter user/kernel selection */ - unsigned long kernel; - unsigned long user; - unsigned long unit_mask; -}; - -/* System-wide configuration as set via oprofilefs. */ -struct op_system_config { -#ifdef CONFIG_PPC64 - unsigned long mmcr0; - unsigned long mmcr1; - unsigned long mmcra; -#endif - unsigned long enable_kernel; - unsigned long enable_user; -}; - -/* Per-arch configuration */ -struct op_powerpc_model { - int (*reg_setup) (struct op_counter_config *, - struct op_system_config *, - int num_counters); - int (*cpu_setup) (struct op_counter_config *); - int (*start) (struct op_counter_config *); - int (*global_start) (struct op_counter_config *); - void (*stop) (void); - void (*global_stop) (void); - int (*sync_start)(void); - int (*sync_stop)(void); - void (*handle_interrupt) (struct pt_regs *, - struct op_counter_config *); - int num_counters; -}; - -extern struct op_powerpc_model op_model_fsl_emb; -extern struct op_powerpc_model op_model_rs64; -extern struct op_powerpc_model op_model_power4; -extern struct op_powerpc_model op_model_7450; -extern struct op_powerpc_model op_model_cell; -extern struct op_powerpc_model op_model_pa6t; - - -/* All the classic PPC parts use these */ -static inline unsigned int classic_ctr_read(unsigned int i) -{ - switch(i) { - case 0: - return mfspr(SPRN_PMC1); - case 1: - return mfspr(SPRN_PMC2); - case 2: - return mfspr(SPRN_PMC3); - case 3: - return mfspr(SPRN_PMC4); - case 4: - return mfspr(SPRN_PMC5); - case 5: - return mfspr(SPRN_PMC6); - -/* No PPC32 chip has more than 6 so far */ -#ifdef CONFIG_PPC64 - case 6: - return mfspr(SPRN_PMC7); - case 7: - return mfspr(SPRN_PMC8); -#endif - default: - return 0; - } -} - -static inline void classic_ctr_write(unsigned int i, unsigned int val) -{ - switch(i) { - case 0: - mtspr(SPRN_PMC1, val); - break; - case 1: - mtspr(SPRN_PMC2, val); - break; - case 2: - mtspr(SPRN_PMC3, val); - break; - case 3: - mtspr(SPRN_PMC4, val); - break; - case 4: - mtspr(SPRN_PMC5, val); - break; - case 5: - mtspr(SPRN_PMC6, val); - break; - -/* No PPC32 chip has more than 6, yet */ -#ifdef CONFIG_PPC64 - case 6: - mtspr(SPRN_PMC7, val); - break; - case 7: - mtspr(SPRN_PMC8, val); - break; -#endif - default: - break; - } -} - - -extern void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */ diff --git a/include/asm-powerpc/pSeries_reconfig.h b/include/asm-powerpc/pSeries_reconfig.h deleted file mode 100644 index e482e5352e69..000000000000 --- a/include/asm-powerpc/pSeries_reconfig.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _PPC64_PSERIES_RECONFIG_H -#define _PPC64_PSERIES_RECONFIG_H -#ifdef __KERNEL__ - -#include - -/* - * Use this API if your code needs to know about OF device nodes being - * added or removed on pSeries systems. - */ - -#define PSERIES_RECONFIG_ADD 0x0001 -#define PSERIES_RECONFIG_REMOVE 0x0002 -#define PSERIES_DRCONF_MEM_ADD 0x0003 -#define PSERIES_DRCONF_MEM_REMOVE 0x0004 - -#ifdef CONFIG_PPC_PSERIES -extern int pSeries_reconfig_notifier_register(struct notifier_block *); -extern void pSeries_reconfig_notifier_unregister(struct notifier_block *); -#else /* !CONFIG_PPC_PSERIES */ -static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb) -{ - return 0; -} -static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { } -#endif /* CONFIG_PPC_PSERIES */ - -#endif /* __KERNEL__ */ -#endif /* _PPC64_PSERIES_RECONFIG_H */ diff --git a/include/asm-powerpc/paca.h b/include/asm-powerpc/paca.h deleted file mode 100644 index 7b564444ff61..000000000000 --- a/include/asm-powerpc/paca.h +++ /dev/null @@ -1,114 +0,0 @@ -/* - * include/asm-powerpc/paca.h - * - * This control block defines the PACA which defines the processor - * specific data for each logical processor on the system. - * There are some pointers defined that are utilized by PLIC. - * - * C 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_POWERPC_PACA_H -#define _ASM_POWERPC_PACA_H -#ifdef __KERNEL__ - -#include -#include -#include - -register struct paca_struct *local_paca asm("r13"); - -#if defined(CONFIG_DEBUG_PREEMPT) && defined(CONFIG_SMP) -extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */ -/* - * Add standard checks that preemption cannot occur when using get_paca(): - * otherwise the paca_struct it points to may be the wrong one just after. - */ -#define get_paca() ((void) debug_smp_processor_id(), local_paca) -#else -#define get_paca() local_paca -#endif - -#define get_lppaca() (get_paca()->lppaca_ptr) -#define get_slb_shadow() (get_paca()->slb_shadow_ptr) - -struct task_struct; - -/* - * Defines the layout of the paca. - * - * This structure is not directly accessed by firmware or the service - * processor. - */ -struct paca_struct { - /* - * Because hw_cpu_id, unlike other paca fields, is accessed - * routinely from other CPUs (from the IRQ code), we stick to - * read-only (after boot) fields in the first cacheline to - * avoid cacheline bouncing. - */ - - struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */ - - /* - * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c - * load lock_token and paca_index with a single lwz - * instruction. They must travel together and be properly - * aligned. - */ - u16 lock_token; /* Constant 0x8000, used in locks */ - u16 paca_index; /* Logical processor number */ - - u64 kernel_toc; /* Kernel TOC address */ - u64 stab_real; /* Absolute address of segment table */ - u64 stab_addr; /* Virtual address of segment table */ - void *emergency_sp; /* pointer to emergency stack */ - u64 data_offset; /* per cpu data offset */ - s16 hw_cpu_id; /* Physical processor number */ - u8 cpu_start; /* At startup, processor spins until */ - /* this becomes non-zero. */ - struct slb_shadow *slb_shadow_ptr; - - /* - * Now, starting in cacheline 2, the exception save areas - */ - /* used for most interrupts/exceptions */ - u64 exgen[10] __attribute__((aligned(0x80))); - u64 exmc[10]; /* used for machine checks */ - u64 exslb[10]; /* used for SLB/segment table misses - * on the linear mapping */ - - mm_context_t context; - u16 vmalloc_sllp; - u16 slb_cache_ptr; - u16 slb_cache[SLB_CACHE_ENTRIES]; - - /* - * then miscellaneous read-write fields - */ - struct task_struct *__current; /* Pointer to current */ - u64 kstack; /* Saved Kernel stack addr */ - u64 stab_rr; /* stab/slb round-robin counter */ - u64 saved_r1; /* r1 save for RTAS calls */ - u64 saved_msr; /* MSR saved here by enter_rtas */ - u16 trap_save; /* Used when bad stack is encountered */ - u8 soft_enabled; /* irq soft-enable flag */ - u8 hard_enabled; /* set if irqs are enabled in MSR */ - u8 io_sync; /* writel() needs spin_unlock sync */ - - /* Stuff for accurate time accounting */ - u64 user_time; /* accumulated usermode TB ticks */ - u64 system_time; /* accumulated system TB ticks */ - u64 startpurr; /* PURR/TB value snapshot */ - u64 startspurr; /* SPURR value snapshot */ -}; - -extern struct paca_struct paca[]; -extern void initialise_pacas(void); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_PACA_H */ diff --git a/include/asm-powerpc/page.h b/include/asm-powerpc/page.h deleted file mode 100644 index e088545cb3f5..000000000000 --- a/include/asm-powerpc/page.h +++ /dev/null @@ -1,225 +0,0 @@ -#ifndef _ASM_POWERPC_PAGE_H -#define _ASM_POWERPC_PAGE_H - -/* - * Copyright (C) 2001,2005 IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include - -/* - * On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software - * page size. When using 64K pages however, whether we are really supporting - * 64K pages in HW or not is irrelevant to those definitions. - */ -#ifdef CONFIG_PPC_64K_PAGES -#define PAGE_SHIFT 16 -#else -#define PAGE_SHIFT 12 -#endif - -#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) - -/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */ -#define __HAVE_ARCH_GATE_AREA 1 - -/* - * Subtle: (1 << PAGE_SHIFT) is an int, not an unsigned long. So if we - * assign PAGE_MASK to a larger type it gets extended the way we want - * (i.e. with 1s in the high bits) - */ -#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) - -/* - * KERNELBASE is the virtual address of the start of the kernel, it's often - * the same as PAGE_OFFSET, but _might not be_. - * - * The kdump dump kernel is one example where KERNELBASE != PAGE_OFFSET. - * - * PAGE_OFFSET is the virtual address of the start of lowmem. - * - * PHYSICAL_START is the physical address of the start of the kernel. - * - * MEMORY_START is the physical address of the start of lowmem. - * - * KERNELBASE, PAGE_OFFSET, and PHYSICAL_START are all configurable on - * ppc32 and based on how they are set we determine MEMORY_START. - * - * For the linear mapping the following equation should be true: - * KERNELBASE - PAGE_OFFSET = PHYSICAL_START - MEMORY_START - * - * Also, KERNELBASE >= PAGE_OFFSET and PHYSICAL_START >= MEMORY_START - * - * There are two was to determine a physical address from a virtual one: - * va = pa + PAGE_OFFSET - MEMORY_START - * va = pa + KERNELBASE - PHYSICAL_START - * - * If you want to know something's offset from the start of the kernel you - * should subtract KERNELBASE. - * - * If you want to test if something's a kernel address, use is_kernel_addr(). - */ - -#define KERNELBASE ASM_CONST(CONFIG_KERNEL_START) -#define PAGE_OFFSET ASM_CONST(CONFIG_PAGE_OFFSET) -#define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START)) - -#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_FLATMEM) -#ifndef __ASSEMBLY__ -extern phys_addr_t memstart_addr; -extern phys_addr_t kernstart_addr; -#endif -#define PHYSICAL_START kernstart_addr -#define MEMORY_START memstart_addr -#else -#define PHYSICAL_START ASM_CONST(CONFIG_PHYSICAL_START) -#define MEMORY_START (PHYSICAL_START + PAGE_OFFSET - KERNELBASE) -#endif - -#ifdef CONFIG_FLATMEM -#define ARCH_PFN_OFFSET (MEMORY_START >> PAGE_SHIFT) -#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr)) -#endif - -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) - -#define __va(x) ((void *)((unsigned long)(x) - PHYSICAL_START + KERNELBASE)) -#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE) - -/* - * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI, - * and needs to be executable. This means the whole heap ends - * up being executable. - */ -#define VM_DATA_DEFAULT_FLAGS32 (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#define VM_DATA_DEFAULT_FLAGS64 (VM_READ | VM_WRITE | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#ifdef __powerpc64__ -#include -#else -#include -#endif - -/* align addr on a size boundary - adjust address up/down if needed */ -#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) -#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1))) - -/* align addr on a size boundary - adjust address up if needed */ -#define _ALIGN(addr,size) _ALIGN_UP(addr,size) - -/* - * Don't compare things with KERNELBASE or PAGE_OFFSET to test for - * "kernelness", use is_kernel_addr() - it should do what you want. - */ -#define is_kernel_addr(x) ((x) >= PAGE_OFFSET) - -#ifndef __ASSEMBLY__ - -#undef STRICT_MM_TYPECHECKS - -#ifdef STRICT_MM_TYPECHECKS -/* These are used to make use of C type-checking. */ - -/* PTE level */ -typedef struct { pte_basic_t pte; } pte_t; -#define pte_val(x) ((x).pte) -#define __pte(x) ((pte_t) { (x) }) - -/* 64k pages additionally define a bigger "real PTE" type that gathers - * the "second half" part of the PTE for pseudo 64k pages - */ -#ifdef CONFIG_PPC_64K_PAGES -typedef struct { pte_t pte; unsigned long hidx; } real_pte_t; -#else -typedef struct { pte_t pte; } real_pte_t; -#endif - -/* PMD level */ -#ifdef CONFIG_PPC64 -typedef struct { unsigned long pmd; } pmd_t; -#define pmd_val(x) ((x).pmd) -#define __pmd(x) ((pmd_t) { (x) }) - -/* PUD level exusts only on 4k pages */ -#ifndef CONFIG_PPC_64K_PAGES -typedef struct { unsigned long pud; } pud_t; -#define pud_val(x) ((x).pud) -#define __pud(x) ((pud_t) { (x) }) -#endif /* !CONFIG_PPC_64K_PAGES */ -#endif /* CONFIG_PPC64 */ - -/* PGD level */ -typedef struct { unsigned long pgd; } pgd_t; -#define pgd_val(x) ((x).pgd) -#define __pgd(x) ((pgd_t) { (x) }) - -/* Page protection bits */ -typedef struct { unsigned long pgprot; } pgprot_t; -#define pgprot_val(x) ((x).pgprot) -#define __pgprot(x) ((pgprot_t) { (x) }) - -#else - -/* - * .. while these make it easier on the compiler - */ - -typedef pte_basic_t pte_t; -#define pte_val(x) (x) -#define __pte(x) (x) - -#ifdef CONFIG_PPC_64K_PAGES -typedef struct { pte_t pte; unsigned long hidx; } real_pte_t; -#else -typedef unsigned long real_pte_t; -#endif - - -#ifdef CONFIG_PPC64 -typedef unsigned long pmd_t; -#define pmd_val(x) (x) -#define __pmd(x) (x) - -#ifndef CONFIG_PPC_64K_PAGES -typedef unsigned long pud_t; -#define pud_val(x) (x) -#define __pud(x) (x) -#endif /* !CONFIG_PPC_64K_PAGES */ -#endif /* CONFIG_PPC64 */ - -typedef unsigned long pgd_t; -#define pgd_val(x) (x) -#define pgprot_val(x) (x) - -typedef unsigned long pgprot_t; -#define __pgd(x) (x) -#define __pgprot(x) (x) - -#endif - -struct page; -extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg); -extern void copy_user_page(void *to, void *from, unsigned long vaddr, - struct page *p); -extern int page_is_ram(unsigned long pfn); - -struct vm_area_struct; - -typedef struct page *pgtable_t; - -#include -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_PAGE_H */ diff --git a/include/asm-powerpc/page_32.h b/include/asm-powerpc/page_32.h deleted file mode 100644 index ebfae530a379..000000000000 --- a/include/asm-powerpc/page_32.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef _ASM_POWERPC_PAGE_32_H -#define _ASM_POWERPC_PAGE_32_H - -#if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0) -#if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0 -#error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN" -#endif -#endif - -#define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32 - -#ifdef CONFIG_NOT_COHERENT_CACHE -#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES -#endif - -#ifndef __ASSEMBLY__ -/* - * The basic type of a PTE - 64 bits for those CPUs with > 32 bit - * physical addressing. For now this just the IBM PPC440. - */ -#ifdef CONFIG_PTE_64BIT -typedef unsigned long long pte_basic_t; -#define PTE_SHIFT (PAGE_SHIFT - 3) /* 512 ptes per page */ -#else -typedef unsigned long pte_basic_t; -#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */ -#endif - -struct page; -extern void clear_pages(void *page, int order); -static inline void clear_page(void *page) { clear_pages(page, 0); } -extern void copy_page(void *to, void *from); - -#include - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_PAGE_32_H */ diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h deleted file mode 100644 index 043bfdfe4f73..000000000000 --- a/include/asm-powerpc/page_64.h +++ /dev/null @@ -1,185 +0,0 @@ -#ifndef _ASM_POWERPC_PAGE_64_H -#define _ASM_POWERPC_PAGE_64_H - -/* - * Copyright (C) 2001 PPC64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* - * We always define HW_PAGE_SHIFT to 12 as use of 64K pages remains Linux - * specific, every notion of page number shared with the firmware, TCEs, - * iommu, etc... still uses a page size of 4K. - */ -#define HW_PAGE_SHIFT 12 -#define HW_PAGE_SIZE (ASM_CONST(1) << HW_PAGE_SHIFT) -#define HW_PAGE_MASK (~(HW_PAGE_SIZE-1)) - -/* - * PAGE_FACTOR is the number of bits factor between PAGE_SHIFT and - * HW_PAGE_SHIFT, that is 4K pages. - */ -#define PAGE_FACTOR (PAGE_SHIFT - HW_PAGE_SHIFT) - -/* Segment size; normal 256M segments */ -#define SID_SHIFT 28 -#define SID_MASK ASM_CONST(0xfffffffff) -#define ESID_MASK 0xfffffffff0000000UL -#define GET_ESID(x) (((x) >> SID_SHIFT) & SID_MASK) - -/* 1T segments */ -#define SID_SHIFT_1T 40 -#define SID_MASK_1T 0xffffffUL -#define ESID_MASK_1T 0xffffff0000000000UL -#define GET_ESID_1T(x) (((x) >> SID_SHIFT_1T) & SID_MASK_1T) - -#ifndef __ASSEMBLY__ -#include - -typedef unsigned long pte_basic_t; - -static __inline__ void clear_page(void *addr) -{ - unsigned long lines, line_size; - - line_size = ppc64_caches.dline_size; - lines = ppc64_caches.dlines_per_page; - - __asm__ __volatile__( - "mtctr %1 # clear_page\n\ -1: dcbz 0,%0\n\ - add %0,%0,%3\n\ - bdnz+ 1b" - : "=r" (addr) - : "r" (lines), "0" (addr), "r" (line_size) - : "ctr", "memory"); -} - -extern void copy_4K_page(void *to, void *from); - -#ifdef CONFIG_PPC_64K_PAGES -static inline void copy_page(void *to, void *from) -{ - unsigned int i; - for (i=0; i < (1 << (PAGE_SHIFT - 12)); i++) { - copy_4K_page(to, from); - to += 4096; - from += 4096; - } -} -#else /* CONFIG_PPC_64K_PAGES */ -static inline void copy_page(void *to, void *from) -{ - copy_4K_page(to, from); -} -#endif /* CONFIG_PPC_64K_PAGES */ - -/* Log 2 of page table size */ -extern u64 ppc64_pft_size; - -/* Large pages size */ -#ifdef CONFIG_HUGETLB_PAGE -extern unsigned int HPAGE_SHIFT; -#else -#define HPAGE_SHIFT PAGE_SHIFT -#endif -#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) -#define HPAGE_MASK (~(HPAGE_SIZE - 1)) -#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) -#define HUGE_MAX_HSTATE 3 - -#endif /* __ASSEMBLY__ */ - -#ifdef CONFIG_PPC_MM_SLICES - -#define SLICE_LOW_SHIFT 28 -#define SLICE_HIGH_SHIFT 40 - -#define SLICE_LOW_TOP (0x100000000ul) -#define SLICE_NUM_LOW (SLICE_LOW_TOP >> SLICE_LOW_SHIFT) -#define SLICE_NUM_HIGH (PGTABLE_RANGE >> SLICE_HIGH_SHIFT) - -#define GET_LOW_SLICE_INDEX(addr) ((addr) >> SLICE_LOW_SHIFT) -#define GET_HIGH_SLICE_INDEX(addr) ((addr) >> SLICE_HIGH_SHIFT) - -#ifndef __ASSEMBLY__ - -struct slice_mask { - u16 low_slices; - u16 high_slices; -}; - -struct mm_struct; - -extern unsigned long slice_get_unmapped_area(unsigned long addr, - unsigned long len, - unsigned long flags, - unsigned int psize, - int topdown, - int use_cache); - -extern unsigned int get_slice_psize(struct mm_struct *mm, - unsigned long addr); - -extern void slice_init_context(struct mm_struct *mm, unsigned int psize); -extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize); -extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start, - unsigned long len, unsigned int psize); - -#define slice_mm_new_context(mm) ((mm)->context.id == 0) - -#endif /* __ASSEMBLY__ */ -#else -#define slice_init() -#define get_slice_psize(mm, addr) ((mm)->context.user_psize) -#define slice_set_user_psize(mm, psize) \ -do { \ - (mm)->context.user_psize = (psize); \ - (mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \ -} while (0) -#define slice_set_range_psize(mm, start, len, psize) \ - slice_set_user_psize((mm), (psize)) -#define slice_mm_new_context(mm) 1 -#endif /* CONFIG_PPC_MM_SLICES */ - -#ifdef CONFIG_HUGETLB_PAGE - -#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA - -#endif /* !CONFIG_HUGETLB_PAGE */ - -#ifdef MODULE -#define __page_aligned __attribute__((__aligned__(PAGE_SIZE))) -#else -#define __page_aligned \ - __attribute__((__aligned__(PAGE_SIZE), \ - __section__(".data.page_aligned"))) -#endif - -#define VM_DATA_DEFAULT_FLAGS \ - (test_thread_flag(TIF_32BIT) ? \ - VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64) - -/* - * This is the default if a program doesn't have a PT_GNU_STACK - * program header entry. The PPC64 ELF ABI has a non executable stack - * stack by default, so in the absense of a PT_GNU_STACK program header - * we turn execute permission off. - */ -#define VM_STACK_DEFAULT_FLAGS32 (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#define VM_STACK_DEFAULT_FLAGS64 (VM_READ | VM_WRITE | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#define VM_STACK_DEFAULT_FLAGS \ - (test_thread_flag(TIF_32BIT) ? \ - VM_STACK_DEFAULT_FLAGS32 : VM_STACK_DEFAULT_FLAGS64) - -#include - -#endif /* _ASM_POWERPC_PAGE_64_H */ diff --git a/include/asm-powerpc/param.h b/include/asm-powerpc/param.h deleted file mode 100644 index 094f63d4d5ca..000000000000 --- a/include/asm-powerpc/param.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _ASM_POWERPC_PARAM_H -#define _ASM_POWERPC_PARAM_H - -#ifdef __KERNEL__ -#define HZ CONFIG_HZ /* internal kernel timer frequency */ -#define USER_HZ 100 /* for user interfaces in "ticks" */ -#define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ -#endif /* __KERNEL__ */ - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _ASM_POWERPC_PARAM_H */ diff --git a/include/asm-powerpc/parport.h b/include/asm-powerpc/parport.h deleted file mode 100644 index 414c50e2e881..000000000000 --- a/include/asm-powerpc/parport.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * parport.h: platform-specific PC-style parport initialisation - * - * Copyright (C) 1999, 2000 Tim Waugh - * - * This file should only be included by drivers/parport/parport_pc.c. - */ - -#ifndef _ASM_POWERPC_PARPORT_H -#define _ASM_POWERPC_PARPORT_H -#ifdef __KERNEL__ - -#include - -static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) -{ - struct device_node *np; - const u32 *prop; - u32 io1, io2; - int propsize; - int count = 0; - for (np = NULL; (np = of_find_compatible_node(np, - "parallel", - "pnpPNP,400")) != NULL;) { - prop = of_get_property(np, "reg", &propsize); - if (!prop || propsize > 6*sizeof(u32)) - continue; - io1 = prop[1]; io2 = prop[2]; - prop = of_get_property(np, "interrupts", NULL); - if (!prop) - continue; - if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL) != NULL) - count++; - } - return count; -} - -#endif /* __KERNEL__ */ -#endif /* !(_ASM_POWERPC_PARPORT_H) */ diff --git a/include/asm-powerpc/pasemi_dma.h b/include/asm-powerpc/pasemi_dma.h deleted file mode 100644 index 19fd7933e2d9..000000000000 --- a/include/asm-powerpc/pasemi_dma.h +++ /dev/null @@ -1,538 +0,0 @@ -/* - * Copyright (C) 2006-2008 PA Semi, Inc - * - * Hardware register layout and descriptor formats for the on-board - * DMA engine on PA Semi PWRficient. Used by ethernet, function and security - * drivers. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef ASM_PASEMI_DMA_H -#define ASM_PASEMI_DMA_H - -/* status register layout in IOB region, at 0xfb800000 */ -struct pasdma_status { - u64 rx_sta[64]; /* RX channel status */ - u64 tx_sta[20]; /* TX channel status */ -}; - - -/* All these registers live in the PCI configuration space for the DMA PCI - * device. Use the normal PCI config access functions for them. - */ -enum { - PAS_DMA_CAP_TXCH = 0x44, /* Transmit Channel Info */ - PAS_DMA_CAP_RXCH = 0x48, /* Transmit Channel Info */ - PAS_DMA_CAP_IFI = 0x4c, /* Interface Info */ - PAS_DMA_COM_TXCMD = 0x100, /* Transmit Command Register */ - PAS_DMA_COM_TXSTA = 0x104, /* Transmit Status Register */ - PAS_DMA_COM_RXCMD = 0x108, /* Receive Command Register */ - PAS_DMA_COM_RXSTA = 0x10c, /* Receive Status Register */ - PAS_DMA_COM_CFG = 0x114, /* Common config reg */ - PAS_DMA_TXF_SFLG0 = 0x140, /* Set flags */ - PAS_DMA_TXF_SFLG1 = 0x144, /* Set flags */ - PAS_DMA_TXF_CFLG0 = 0x148, /* Set flags */ - PAS_DMA_TXF_CFLG1 = 0x14c, /* Set flags */ -}; - - -#define PAS_DMA_CAP_TXCH_TCHN_M 0x00ff0000 /* # of TX channels */ -#define PAS_DMA_CAP_TXCH_TCHN_S 16 - -#define PAS_DMA_CAP_RXCH_RCHN_M 0x00ff0000 /* # of RX channels */ -#define PAS_DMA_CAP_RXCH_RCHN_S 16 - -#define PAS_DMA_CAP_IFI_IOFF_M 0xff000000 /* Cfg reg for intf pointers */ -#define PAS_DMA_CAP_IFI_IOFF_S 24 -#define PAS_DMA_CAP_IFI_NIN_M 0x00ff0000 /* # of interfaces */ -#define PAS_DMA_CAP_IFI_NIN_S 16 - -#define PAS_DMA_COM_TXCMD_EN 0x00000001 /* enable */ -#define PAS_DMA_COM_TXSTA_ACT 0x00000001 /* active */ -#define PAS_DMA_COM_RXCMD_EN 0x00000001 /* enable */ -#define PAS_DMA_COM_RXSTA_ACT 0x00000001 /* active */ - - -/* Per-interface and per-channel registers */ -#define _PAS_DMA_RXINT_STRIDE 0x20 -#define PAS_DMA_RXINT_RCMDSTA(i) (0x200+(i)*_PAS_DMA_RXINT_STRIDE) -#define PAS_DMA_RXINT_RCMDSTA_EN 0x00000001 -#define PAS_DMA_RXINT_RCMDSTA_ST 0x00000002 -#define PAS_DMA_RXINT_RCMDSTA_MBT 0x00000008 -#define PAS_DMA_RXINT_RCMDSTA_MDR 0x00000010 -#define PAS_DMA_RXINT_RCMDSTA_MOO 0x00000020 -#define PAS_DMA_RXINT_RCMDSTA_MBP 0x00000040 -#define PAS_DMA_RXINT_RCMDSTA_BT 0x00000800 -#define PAS_DMA_RXINT_RCMDSTA_DR 0x00001000 -#define PAS_DMA_RXINT_RCMDSTA_OO 0x00002000 -#define PAS_DMA_RXINT_RCMDSTA_BP 0x00004000 -#define PAS_DMA_RXINT_RCMDSTA_TB 0x00008000 -#define PAS_DMA_RXINT_RCMDSTA_ACT 0x00010000 -#define PAS_DMA_RXINT_RCMDSTA_DROPS_M 0xfffe0000 -#define PAS_DMA_RXINT_RCMDSTA_DROPS_S 17 -#define PAS_DMA_RXINT_CFG(i) (0x204+(i)*_PAS_DMA_RXINT_STRIDE) -#define PAS_DMA_RXINT_CFG_RBP 0x80000000 -#define PAS_DMA_RXINT_CFG_ITRR 0x40000000 -#define PAS_DMA_RXINT_CFG_DHL_M 0x07000000 -#define PAS_DMA_RXINT_CFG_DHL_S 24 -#define PAS_DMA_RXINT_CFG_DHL(x) (((x) << PAS_DMA_RXINT_CFG_DHL_S) & \ - PAS_DMA_RXINT_CFG_DHL_M) -#define PAS_DMA_RXINT_CFG_ITR 0x00400000 -#define PAS_DMA_RXINT_CFG_LW 0x00200000 -#define PAS_DMA_RXINT_CFG_L2 0x00100000 -#define PAS_DMA_RXINT_CFG_HEN 0x00080000 -#define PAS_DMA_RXINT_CFG_WIF 0x00000002 -#define PAS_DMA_RXINT_CFG_WIL 0x00000001 - -#define PAS_DMA_RXINT_INCR(i) (0x210+(i)*_PAS_DMA_RXINT_STRIDE) -#define PAS_DMA_RXINT_INCR_INCR_M 0x0000ffff -#define PAS_DMA_RXINT_INCR_INCR_S 0 -#define PAS_DMA_RXINT_INCR_INCR(x) ((x) & 0x0000ffff) -#define PAS_DMA_RXINT_BASEL(i) (0x218+(i)*_PAS_DMA_RXINT_STRIDE) -#define PAS_DMA_RXINT_BASEL_BRBL(x) ((x) & ~0x3f) -#define PAS_DMA_RXINT_BASEU(i) (0x21c+(i)*_PAS_DMA_RXINT_STRIDE) -#define PAS_DMA_RXINT_BASEU_BRBH(x) ((x) & 0xfff) -#define PAS_DMA_RXINT_BASEU_SIZ_M 0x3fff0000 /* # of cache lines worth of buffer ring */ -#define PAS_DMA_RXINT_BASEU_SIZ_S 16 /* 0 = 16K */ -#define PAS_DMA_RXINT_BASEU_SIZ(x) (((x) << PAS_DMA_RXINT_BASEU_SIZ_S) & \ - PAS_DMA_RXINT_BASEU_SIZ_M) - - -#define _PAS_DMA_TXCHAN_STRIDE 0x20 /* Size per channel */ -#define _PAS_DMA_TXCHAN_TCMDSTA 0x300 /* Command / Status */ -#define _PAS_DMA_TXCHAN_CFG 0x304 /* Configuration */ -#define _PAS_DMA_TXCHAN_DSCRBU 0x308 /* Descriptor BU Allocation */ -#define _PAS_DMA_TXCHAN_INCR 0x310 /* Descriptor increment */ -#define _PAS_DMA_TXCHAN_CNT 0x314 /* Descriptor count/offset */ -#define _PAS_DMA_TXCHAN_BASEL 0x318 /* Descriptor ring base (low) */ -#define _PAS_DMA_TXCHAN_BASEU 0x31c /* (high) */ -#define PAS_DMA_TXCHAN_TCMDSTA(c) (0x300+(c)*_PAS_DMA_TXCHAN_STRIDE) -#define PAS_DMA_TXCHAN_TCMDSTA_EN 0x00000001 /* Enabled */ -#define PAS_DMA_TXCHAN_TCMDSTA_ST 0x00000002 /* Stop interface */ -#define PAS_DMA_TXCHAN_TCMDSTA_ACT 0x00010000 /* Active */ -#define PAS_DMA_TXCHAN_TCMDSTA_SZ 0x00000800 -#define PAS_DMA_TXCHAN_TCMDSTA_DB 0x00000400 -#define PAS_DMA_TXCHAN_TCMDSTA_DE 0x00000200 -#define PAS_DMA_TXCHAN_TCMDSTA_DA 0x00000100 -#define PAS_DMA_TXCHAN_CFG(c) (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE) -#define PAS_DMA_TXCHAN_CFG_TY_IFACE 0x00000000 /* Type = interface */ -#define PAS_DMA_TXCHAN_CFG_TY_COPY 0x00000001 /* Type = copy only */ -#define PAS_DMA_TXCHAN_CFG_TY_FUNC 0x00000002 /* Type = function */ -#define PAS_DMA_TXCHAN_CFG_TY_XOR 0x00000003 /* Type = xor only */ -#define PAS_DMA_TXCHAN_CFG_TATTR_M 0x0000003c -#define PAS_DMA_TXCHAN_CFG_TATTR_S 2 -#define PAS_DMA_TXCHAN_CFG_TATTR(x) (((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \ - PAS_DMA_TXCHAN_CFG_TATTR_M) -#define PAS_DMA_TXCHAN_CFG_LPDQ 0x00000800 -#define PAS_DMA_TXCHAN_CFG_LPSQ 0x00000400 -#define PAS_DMA_TXCHAN_CFG_WT_M 0x000003c0 -#define PAS_DMA_TXCHAN_CFG_WT_S 6 -#define PAS_DMA_TXCHAN_CFG_WT(x) (((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \ - PAS_DMA_TXCHAN_CFG_WT_M) -#define PAS_DMA_TXCHAN_CFG_TRD 0x00010000 /* translate data */ -#define PAS_DMA_TXCHAN_CFG_TRR 0x00008000 /* translate rings */ -#define PAS_DMA_TXCHAN_CFG_UP 0x00004000 /* update tx descr when sent */ -#define PAS_DMA_TXCHAN_CFG_CL 0x00002000 /* Clean last line */ -#define PAS_DMA_TXCHAN_CFG_CF 0x00001000 /* Clean first line */ -#define PAS_DMA_TXCHAN_INCR(c) (0x310+(c)*_PAS_DMA_TXCHAN_STRIDE) -#define PAS_DMA_TXCHAN_BASEL(c) (0x318+(c)*_PAS_DMA_TXCHAN_STRIDE) -#define PAS_DMA_TXCHAN_BASEL_BRBL_M 0xffffffc0 -#define PAS_DMA_TXCHAN_BASEL_BRBL_S 0 -#define PAS_DMA_TXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_TXCHAN_BASEL_BRBL_S) & \ - PAS_DMA_TXCHAN_BASEL_BRBL_M) -#define PAS_DMA_TXCHAN_BASEU(c) (0x31c+(c)*_PAS_DMA_TXCHAN_STRIDE) -#define PAS_DMA_TXCHAN_BASEU_BRBH_M 0x00000fff -#define PAS_DMA_TXCHAN_BASEU_BRBH_S 0 -#define PAS_DMA_TXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_TXCHAN_BASEU_BRBH_S) & \ - PAS_DMA_TXCHAN_BASEU_BRBH_M) -/* # of cache lines worth of buffer ring */ -#define PAS_DMA_TXCHAN_BASEU_SIZ_M 0x3fff0000 -#define PAS_DMA_TXCHAN_BASEU_SIZ_S 16 /* 0 = 16K */ -#define PAS_DMA_TXCHAN_BASEU_SIZ(x) (((x) << PAS_DMA_TXCHAN_BASEU_SIZ_S) & \ - PAS_DMA_TXCHAN_BASEU_SIZ_M) - -#define _PAS_DMA_RXCHAN_STRIDE 0x20 /* Size per channel */ -#define _PAS_DMA_RXCHAN_CCMDSTA 0x800 /* Command / Status */ -#define _PAS_DMA_RXCHAN_CFG 0x804 /* Configuration */ -#define _PAS_DMA_RXCHAN_INCR 0x810 /* Descriptor increment */ -#define _PAS_DMA_RXCHAN_CNT 0x814 /* Descriptor count/offset */ -#define _PAS_DMA_RXCHAN_BASEL 0x818 /* Descriptor ring base (low) */ -#define _PAS_DMA_RXCHAN_BASEU 0x81c /* (high) */ -#define PAS_DMA_RXCHAN_CCMDSTA(c) (0x800+(c)*_PAS_DMA_RXCHAN_STRIDE) -#define PAS_DMA_RXCHAN_CCMDSTA_EN 0x00000001 /* Enabled */ -#define PAS_DMA_RXCHAN_CCMDSTA_ST 0x00000002 /* Stop interface */ -#define PAS_DMA_RXCHAN_CCMDSTA_ACT 0x00010000 /* Active */ -#define PAS_DMA_RXCHAN_CCMDSTA_DU 0x00020000 -#define PAS_DMA_RXCHAN_CCMDSTA_OD 0x00002000 -#define PAS_DMA_RXCHAN_CCMDSTA_FD 0x00001000 -#define PAS_DMA_RXCHAN_CCMDSTA_DT 0x00000800 -#define PAS_DMA_RXCHAN_CFG(c) (0x804+(c)*_PAS_DMA_RXCHAN_STRIDE) -#define PAS_DMA_RXCHAN_CFG_CTR 0x00000400 -#define PAS_DMA_RXCHAN_CFG_HBU_M 0x00000380 -#define PAS_DMA_RXCHAN_CFG_HBU_S 7 -#define PAS_DMA_RXCHAN_CFG_HBU(x) (((x) << PAS_DMA_RXCHAN_CFG_HBU_S) & \ - PAS_DMA_RXCHAN_CFG_HBU_M) -#define PAS_DMA_RXCHAN_INCR(c) (0x810+(c)*_PAS_DMA_RXCHAN_STRIDE) -#define PAS_DMA_RXCHAN_BASEL(c) (0x818+(c)*_PAS_DMA_RXCHAN_STRIDE) -#define PAS_DMA_RXCHAN_BASEL_BRBL_M 0xffffffc0 -#define PAS_DMA_RXCHAN_BASEL_BRBL_S 0 -#define PAS_DMA_RXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_RXCHAN_BASEL_BRBL_S) & \ - PAS_DMA_RXCHAN_BASEL_BRBL_M) -#define PAS_DMA_RXCHAN_BASEU(c) (0x81c+(c)*_PAS_DMA_RXCHAN_STRIDE) -#define PAS_DMA_RXCHAN_BASEU_BRBH_M 0x00000fff -#define PAS_DMA_RXCHAN_BASEU_BRBH_S 0 -#define PAS_DMA_RXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_RXCHAN_BASEU_BRBH_S) & \ - PAS_DMA_RXCHAN_BASEU_BRBH_M) -/* # of cache lines worth of buffer ring */ -#define PAS_DMA_RXCHAN_BASEU_SIZ_M 0x3fff0000 -#define PAS_DMA_RXCHAN_BASEU_SIZ_S 16 /* 0 = 16K */ -#define PAS_DMA_RXCHAN_BASEU_SIZ(x) (((x) << PAS_DMA_RXCHAN_BASEU_SIZ_S) & \ - PAS_DMA_RXCHAN_BASEU_SIZ_M) - -#define PAS_STATUS_PCNT_M 0x000000000000ffffull -#define PAS_STATUS_PCNT_S 0 -#define PAS_STATUS_DCNT_M 0x00000000ffff0000ull -#define PAS_STATUS_DCNT_S 16 -#define PAS_STATUS_BPCNT_M 0x0000ffff00000000ull -#define PAS_STATUS_BPCNT_S 32 -#define PAS_STATUS_CAUSE_M 0xf000000000000000ull -#define PAS_STATUS_TIMER 0x1000000000000000ull -#define PAS_STATUS_ERROR 0x2000000000000000ull -#define PAS_STATUS_SOFT 0x4000000000000000ull -#define PAS_STATUS_INT 0x8000000000000000ull - -#define PAS_IOB_COM_PKTHDRCNT 0x120 -#define PAS_IOB_COM_PKTHDRCNT_PKTHDR1_M 0x0fff0000 -#define PAS_IOB_COM_PKTHDRCNT_PKTHDR1_S 16 -#define PAS_IOB_COM_PKTHDRCNT_PKTHDR0_M 0x00000fff -#define PAS_IOB_COM_PKTHDRCNT_PKTHDR0_S 0 - -#define PAS_IOB_DMA_RXCH_CFG(i) (0x1100 + (i)*4) -#define PAS_IOB_DMA_RXCH_CFG_CNTTH_M 0x00000fff -#define PAS_IOB_DMA_RXCH_CFG_CNTTH_S 0 -#define PAS_IOB_DMA_RXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_RXCH_CFG_CNTTH_S) & \ - PAS_IOB_DMA_RXCH_CFG_CNTTH_M) -#define PAS_IOB_DMA_TXCH_CFG(i) (0x1200 + (i)*4) -#define PAS_IOB_DMA_TXCH_CFG_CNTTH_M 0x00000fff -#define PAS_IOB_DMA_TXCH_CFG_CNTTH_S 0 -#define PAS_IOB_DMA_TXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_TXCH_CFG_CNTTH_S) & \ - PAS_IOB_DMA_TXCH_CFG_CNTTH_M) -#define PAS_IOB_DMA_RXCH_STAT(i) (0x1300 + (i)*4) -#define PAS_IOB_DMA_RXCH_STAT_INTGEN 0x00001000 -#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_M 0x00000fff -#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_S 0 -#define PAS_IOB_DMA_RXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_RXCH_STAT_CNTDEL_S) &\ - PAS_IOB_DMA_RXCH_STAT_CNTDEL_M) -#define PAS_IOB_DMA_TXCH_STAT(i) (0x1400 + (i)*4) -#define PAS_IOB_DMA_TXCH_STAT_INTGEN 0x00001000 -#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_M 0x00000fff -#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_S 0 -#define PAS_IOB_DMA_TXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_TXCH_STAT_CNTDEL_S) &\ - PAS_IOB_DMA_TXCH_STAT_CNTDEL_M) -#define PAS_IOB_DMA_RXCH_RESET(i) (0x1500 + (i)*4) -#define PAS_IOB_DMA_RXCH_RESET_PCNT_M 0xffff0000 -#define PAS_IOB_DMA_RXCH_RESET_PCNT_S 16 -#define PAS_IOB_DMA_RXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \ - PAS_IOB_DMA_RXCH_RESET_PCNT_M) -#define PAS_IOB_DMA_RXCH_RESET_PCNTRST 0x00000020 -#define PAS_IOB_DMA_RXCH_RESET_DCNTRST 0x00000010 -#define PAS_IOB_DMA_RXCH_RESET_TINTC 0x00000008 -#define PAS_IOB_DMA_RXCH_RESET_DINTC 0x00000004 -#define PAS_IOB_DMA_RXCH_RESET_SINTC 0x00000002 -#define PAS_IOB_DMA_RXCH_RESET_PINTC 0x00000001 -#define PAS_IOB_DMA_TXCH_RESET(i) (0x1600 + (i)*4) -#define PAS_IOB_DMA_TXCH_RESET_PCNT_M 0xffff0000 -#define PAS_IOB_DMA_TXCH_RESET_PCNT_S 16 -#define PAS_IOB_DMA_TXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \ - PAS_IOB_DMA_TXCH_RESET_PCNT_M) -#define PAS_IOB_DMA_TXCH_RESET_PCNTRST 0x00000020 -#define PAS_IOB_DMA_TXCH_RESET_DCNTRST 0x00000010 -#define PAS_IOB_DMA_TXCH_RESET_TINTC 0x00000008 -#define PAS_IOB_DMA_TXCH_RESET_DINTC 0x00000004 -#define PAS_IOB_DMA_TXCH_RESET_SINTC 0x00000002 -#define PAS_IOB_DMA_TXCH_RESET_PINTC 0x00000001 - -#define PAS_IOB_DMA_COM_TIMEOUTCFG 0x1700 -#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M 0x00ffffff -#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S 0 -#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(x) (((x) << PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S) & \ - PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M) - -/* Transmit descriptor fields */ -#define XCT_MACTX_T 0x8000000000000000ull -#define XCT_MACTX_ST 0x4000000000000000ull -#define XCT_MACTX_NORES 0x0000000000000000ull -#define XCT_MACTX_8BRES 0x1000000000000000ull -#define XCT_MACTX_24BRES 0x2000000000000000ull -#define XCT_MACTX_40BRES 0x3000000000000000ull -#define XCT_MACTX_I 0x0800000000000000ull -#define XCT_MACTX_O 0x0400000000000000ull -#define XCT_MACTX_E 0x0200000000000000ull -#define XCT_MACTX_VLAN_M 0x0180000000000000ull -#define XCT_MACTX_VLAN_NOP 0x0000000000000000ull -#define XCT_MACTX_VLAN_REMOVE 0x0080000000000000ull -#define XCT_MACTX_VLAN_INSERT 0x0100000000000000ull -#define XCT_MACTX_VLAN_REPLACE 0x0180000000000000ull -#define XCT_MACTX_CRC_M 0x0060000000000000ull -#define XCT_MACTX_CRC_NOP 0x0000000000000000ull -#define XCT_MACTX_CRC_INSERT 0x0020000000000000ull -#define XCT_MACTX_CRC_PAD 0x0040000000000000ull -#define XCT_MACTX_CRC_REPLACE 0x0060000000000000ull -#define XCT_MACTX_SS 0x0010000000000000ull -#define XCT_MACTX_LLEN_M 0x00007fff00000000ull -#define XCT_MACTX_LLEN_S 32ull -#define XCT_MACTX_LLEN(x) ((((long)(x)) << XCT_MACTX_LLEN_S) & \ - XCT_MACTX_LLEN_M) -#define XCT_MACTX_IPH_M 0x00000000f8000000ull -#define XCT_MACTX_IPH_S 27ull -#define XCT_MACTX_IPH(x) ((((long)(x)) << XCT_MACTX_IPH_S) & \ - XCT_MACTX_IPH_M) -#define XCT_MACTX_IPO_M 0x0000000007c00000ull -#define XCT_MACTX_IPO_S 22ull -#define XCT_MACTX_IPO(x) ((((long)(x)) << XCT_MACTX_IPO_S) & \ - XCT_MACTX_IPO_M) -#define XCT_MACTX_CSUM_M 0x0000000000000060ull -#define XCT_MACTX_CSUM_NOP 0x0000000000000000ull -#define XCT_MACTX_CSUM_TCP 0x0000000000000040ull -#define XCT_MACTX_CSUM_UDP 0x0000000000000060ull -#define XCT_MACTX_V6 0x0000000000000010ull -#define XCT_MACTX_C 0x0000000000000004ull -#define XCT_MACTX_AL2 0x0000000000000002ull - -/* Receive descriptor fields */ -#define XCT_MACRX_T 0x8000000000000000ull -#define XCT_MACRX_ST 0x4000000000000000ull -#define XCT_MACRX_RR_M 0x3000000000000000ull -#define XCT_MACRX_RR_NORES 0x0000000000000000ull -#define XCT_MACRX_RR_8BRES 0x1000000000000000ull -#define XCT_MACRX_O 0x0400000000000000ull -#define XCT_MACRX_E 0x0200000000000000ull -#define XCT_MACRX_FF 0x0100000000000000ull -#define XCT_MACRX_PF 0x0080000000000000ull -#define XCT_MACRX_OB 0x0040000000000000ull -#define XCT_MACRX_OD 0x0020000000000000ull -#define XCT_MACRX_FS 0x0010000000000000ull -#define XCT_MACRX_NB_M 0x000fc00000000000ull -#define XCT_MACRX_NB_S 46ULL -#define XCT_MACRX_NB(x) ((((long)(x)) << XCT_MACRX_NB_S) & \ - XCT_MACRX_NB_M) -#define XCT_MACRX_LLEN_M 0x00003fff00000000ull -#define XCT_MACRX_LLEN_S 32ULL -#define XCT_MACRX_LLEN(x) ((((long)(x)) << XCT_MACRX_LLEN_S) & \ - XCT_MACRX_LLEN_M) -#define XCT_MACRX_CRC 0x0000000080000000ull -#define XCT_MACRX_LEN_M 0x0000000060000000ull -#define XCT_MACRX_LEN_TOOSHORT 0x0000000020000000ull -#define XCT_MACRX_LEN_BELOWMIN 0x0000000040000000ull -#define XCT_MACRX_LEN_TRUNC 0x0000000060000000ull -#define XCT_MACRX_CAST_M 0x0000000018000000ull -#define XCT_MACRX_CAST_UNI 0x0000000000000000ull -#define XCT_MACRX_CAST_MULTI 0x0000000008000000ull -#define XCT_MACRX_CAST_BROAD 0x0000000010000000ull -#define XCT_MACRX_CAST_PAUSE 0x0000000018000000ull -#define XCT_MACRX_VLC_M 0x0000000006000000ull -#define XCT_MACRX_FM 0x0000000001000000ull -#define XCT_MACRX_HTY_M 0x0000000000c00000ull -#define XCT_MACRX_HTY_IPV4_OK 0x0000000000000000ull -#define XCT_MACRX_HTY_IPV6 0x0000000000400000ull -#define XCT_MACRX_HTY_IPV4_BAD 0x0000000000800000ull -#define XCT_MACRX_HTY_NONIP 0x0000000000c00000ull -#define XCT_MACRX_IPP_M 0x00000000003f0000ull -#define XCT_MACRX_IPP_S 16 -#define XCT_MACRX_CSUM_M 0x000000000000ffffull -#define XCT_MACRX_CSUM_S 0 - -#define XCT_PTR_T 0x8000000000000000ull -#define XCT_PTR_LEN_M 0x7ffff00000000000ull -#define XCT_PTR_LEN_S 44 -#define XCT_PTR_LEN(x) ((((long)(x)) << XCT_PTR_LEN_S) & \ - XCT_PTR_LEN_M) -#define XCT_PTR_ADDR_M 0x00000fffffffffffull -#define XCT_PTR_ADDR_S 0 -#define XCT_PTR_ADDR(x) ((((long)(x)) << XCT_PTR_ADDR_S) & \ - XCT_PTR_ADDR_M) - -/* Receive interface 8byte result fields */ -#define XCT_RXRES_8B_L4O_M 0xff00000000000000ull -#define XCT_RXRES_8B_L4O_S 56 -#define XCT_RXRES_8B_RULE_M 0x00ffff0000000000ull -#define XCT_RXRES_8B_RULE_S 40 -#define XCT_RXRES_8B_EVAL_M 0x000000ffff000000ull -#define XCT_RXRES_8B_EVAL_S 24 -#define XCT_RXRES_8B_HTYPE_M 0x0000000000f00000ull -#define XCT_RXRES_8B_HASH_M 0x00000000000fffffull -#define XCT_RXRES_8B_HASH_S 0 - -/* Receive interface buffer fields */ -#define XCT_RXB_LEN_M 0x0ffff00000000000ull -#define XCT_RXB_LEN_S 44 -#define XCT_RXB_LEN(x) ((((long)(x)) << XCT_RXB_LEN_S) & \ - XCT_RXB_LEN_M) -#define XCT_RXB_ADDR_M 0x00000fffffffffffull -#define XCT_RXB_ADDR_S 0 -#define XCT_RXB_ADDR(x) ((((long)(x)) << XCT_RXB_ADDR_S) & \ - XCT_RXB_ADDR_M) - -/* Copy descriptor fields */ -#define XCT_COPY_T 0x8000000000000000ull -#define XCT_COPY_ST 0x4000000000000000ull -#define XCT_COPY_RR_M 0x3000000000000000ull -#define XCT_COPY_RR_NORES 0x0000000000000000ull -#define XCT_COPY_RR_8BRES 0x1000000000000000ull -#define XCT_COPY_RR_24BRES 0x2000000000000000ull -#define XCT_COPY_RR_40BRES 0x3000000000000000ull -#define XCT_COPY_I 0x0800000000000000ull -#define XCT_COPY_O 0x0400000000000000ull -#define XCT_COPY_E 0x0200000000000000ull -#define XCT_COPY_STY_ZERO 0x01c0000000000000ull -#define XCT_COPY_DTY_PREF 0x0038000000000000ull -#define XCT_COPY_LLEN_M 0x0007ffff00000000ull -#define XCT_COPY_LLEN_S 32 -#define XCT_COPY_LLEN(x) ((((long)(x)) << XCT_COPY_LLEN_S) & \ - XCT_COPY_LLEN_M) -#define XCT_COPY_SE 0x0000000000000001ull - -/* Function descriptor fields */ -#define XCT_FUN_T 0x8000000000000000ull -#define XCT_FUN_ST 0x4000000000000000ull -#define XCT_FUN_RR_M 0x3000000000000000ull -#define XCT_FUN_RR_NORES 0x0000000000000000ull -#define XCT_FUN_RR_8BRES 0x1000000000000000ull -#define XCT_FUN_RR_24BRES 0x2000000000000000ull -#define XCT_FUN_RR_40BRES 0x3000000000000000ull -#define XCT_FUN_I 0x0800000000000000ull -#define XCT_FUN_O 0x0400000000000000ull -#define XCT_FUN_E 0x0200000000000000ull -#define XCT_FUN_FUN_M 0x01c0000000000000ull -#define XCT_FUN_FUN_S 54 -#define XCT_FUN_FUN(x) ((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M) -#define XCT_FUN_CRM_M 0x0038000000000000ull -#define XCT_FUN_CRM_NOP 0x0000000000000000ull -#define XCT_FUN_CRM_SIG 0x0008000000000000ull -#define XCT_FUN_LLEN_M 0x0007ffff00000000ull -#define XCT_FUN_LLEN_S 32 -#define XCT_FUN_LLEN(x) ((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M) -#define XCT_FUN_SHL_M 0x00000000f8000000ull -#define XCT_FUN_SHL_S 27 -#define XCT_FUN_SHL(x) ((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M) -#define XCT_FUN_CHL_M 0x0000000007c00000ull -#define XCT_FUN_HSZ_M 0x00000000003c0000ull -#define XCT_FUN_ALG_M 0x0000000000038000ull -#define XCT_FUN_HP 0x0000000000004000ull -#define XCT_FUN_BCM_M 0x0000000000003800ull -#define XCT_FUN_BCP_M 0x0000000000000600ull -#define XCT_FUN_SIG_M 0x00000000000001f0ull -#define XCT_FUN_SIG_TCP4 0x0000000000000140ull -#define XCT_FUN_SIG_TCP6 0x0000000000000150ull -#define XCT_FUN_SIG_UDP4 0x0000000000000160ull -#define XCT_FUN_SIG_UDP6 0x0000000000000170ull -#define XCT_FUN_A 0x0000000000000008ull -#define XCT_FUN_C 0x0000000000000004ull -#define XCT_FUN_AL2 0x0000000000000002ull -#define XCT_FUN_SE 0x0000000000000001ull - -/* Function descriptor 8byte result fields */ -#define XCT_FUNRES_8B_CS_M 0x0000ffff00000000ull -#define XCT_FUNRES_8B_CS_S 32 -#define XCT_FUNRES_8B_CRC_M 0x00000000ffffffffull -#define XCT_FUNRES_8B_CRC_S 0 - -/* Control descriptor fields */ -#define CTRL_CMD_T 0x8000000000000000ull -#define CTRL_CMD_META_EVT 0x2000000000000000ull -#define CTRL_CMD_O 0x0400000000000000ull -#define CTRL_CMD_ETYPE_M 0x0038000000000000ull -#define CTRL_CMD_ETYPE_EXT 0x0000000000000000ull -#define CTRL_CMD_ETYPE_WSET 0x0020000000000000ull -#define CTRL_CMD_ETYPE_WCLR 0x0028000000000000ull -#define CTRL_CMD_ETYPE_SET 0x0030000000000000ull -#define CTRL_CMD_ETYPE_CLR 0x0038000000000000ull -#define CTRL_CMD_REG_M 0x000000000000007full -#define CTRL_CMD_REG_S 0 -#define CTRL_CMD_REG(x) ((((long)(x)) << CTRL_CMD_REG_S) & \ - CTRL_CMD_REG_M) - - - -/* Prototypes for the shared DMA functions in the platform code. */ - -/* DMA TX Channel type. Right now only limitations used are event types 0/1, - * for event-triggered DMA transactions. - */ - -enum pasemi_dmachan_type { - RXCHAN = 0, /* Any RX chan */ - TXCHAN = 1, /* Any TX chan */ - TXCHAN_EVT0 = 0x1001, /* TX chan in event class 0 (chan 0-9) */ - TXCHAN_EVT1 = 0x2001, /* TX chan in event class 1 (chan 10-19) */ -}; - -struct pasemi_dmachan { - int chno; /* Channel number */ - enum pasemi_dmachan_type chan_type; /* TX / RX */ - u64 *status; /* Ptr to cacheable status */ - int irq; /* IRQ used by channel */ - unsigned int ring_size; /* size of allocated ring */ - dma_addr_t ring_dma; /* DMA address for ring */ - u64 *ring_virt; /* Virt address for ring */ - void *priv; /* Ptr to start of client struct */ -}; - -/* Read/write the different registers in the I/O Bridge, Ethernet - * and DMA Controller - */ -extern unsigned int pasemi_read_iob_reg(unsigned int reg); -extern void pasemi_write_iob_reg(unsigned int reg, unsigned int val); - -extern unsigned int pasemi_read_mac_reg(int intf, unsigned int reg); -extern void pasemi_write_mac_reg(int intf, unsigned int reg, unsigned int val); - -extern unsigned int pasemi_read_dma_reg(unsigned int reg); -extern void pasemi_write_dma_reg(unsigned int reg, unsigned int val); - -/* Channel management routines */ - -extern void *pasemi_dma_alloc_chan(enum pasemi_dmachan_type type, - int total_size, int offset); -extern void pasemi_dma_free_chan(struct pasemi_dmachan *chan); - -extern void pasemi_dma_start_chan(const struct pasemi_dmachan *chan, - const u32 cmdsta); -extern int pasemi_dma_stop_chan(const struct pasemi_dmachan *chan); - -/* Common routines to allocate rings and buffers */ - -extern int pasemi_dma_alloc_ring(struct pasemi_dmachan *chan, int ring_size); -extern void pasemi_dma_free_ring(struct pasemi_dmachan *chan); - -extern void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size, - dma_addr_t *handle); -extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size, - dma_addr_t *handle); - -/* Routines to allocate flags (events) for channel syncronization */ -extern int pasemi_dma_alloc_flag(void); -extern void pasemi_dma_free_flag(int flag); -extern void pasemi_dma_set_flag(int flag); -extern void pasemi_dma_clear_flag(int flag); - -/* Routines to allocate function engines */ -extern int pasemi_dma_alloc_fun(void); -extern void pasemi_dma_free_fun(int fun); - -/* Initialize the library, must be called before any other functions */ -extern int pasemi_dma_init(void); - -#endif /* ASM_PASEMI_DMA_H */ diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h deleted file mode 100644 index ae2ea803a0f2..000000000000 --- a/include/asm-powerpc/pci-bridge.h +++ /dev/null @@ -1,302 +0,0 @@ -#ifndef _ASM_POWERPC_PCI_BRIDGE_H -#define _ASM_POWERPC_PCI_BRIDGE_H -#ifdef __KERNEL__ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include - -struct device_node; - -extern unsigned int ppc_pci_flags; -enum { - /* Force re-assigning all resources (ignore firmware - * setup completely) - */ - PPC_PCI_REASSIGN_ALL_RSRC = 0x00000001, - - /* Re-assign all bus numbers */ - PPC_PCI_REASSIGN_ALL_BUS = 0x00000002, - - /* Do not try to assign, just use existing setup */ - PPC_PCI_PROBE_ONLY = 0x00000004, - - /* Don't bother with ISA alignment unless the bridge has - * ISA forwarding enabled - */ - PPC_PCI_CAN_SKIP_ISA_ALIGN = 0x00000008, - - /* Enable domain numbers in /proc */ - PPC_PCI_ENABLE_PROC_DOMAINS = 0x00000010, - /* ... except for domain 0 */ - PPC_PCI_COMPAT_DOMAIN_0 = 0x00000020, -}; - - -/* - * Structure of a PCI controller (host bridge) - */ -struct pci_controller { - struct pci_bus *bus; - char is_dynamic; -#ifdef CONFIG_PPC64 - int node; -#endif - struct device_node *dn; - struct list_head list_node; - struct device *parent; - - int first_busno; - int last_busno; -#ifndef CONFIG_PPC64 - int self_busno; -#endif - - void __iomem *io_base_virt; -#ifdef CONFIG_PPC64 - void *io_base_alloc; -#endif - resource_size_t io_base_phys; -#ifndef CONFIG_PPC64 - resource_size_t pci_io_size; -#endif - - /* Some machines (PReP) have a non 1:1 mapping of - * the PCI memory space in the CPU bus space - */ - resource_size_t pci_mem_offset; -#ifdef CONFIG_PPC64 - unsigned long pci_io_size; -#endif - - struct pci_ops *ops; - unsigned int __iomem *cfg_addr; - void __iomem *cfg_data; - -#ifndef CONFIG_PPC64 - /* - * Used for variants of PCI indirect handling and possible quirks: - * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1 - * EXT_REG - provides access to PCI-e extended registers - * SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS - * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS - * to determine which bus number to match on when generating type0 - * config cycles - * NO_PCIE_LINK - the Freescale PCI-e controllers have issues with - * hanging if we don't have link and try to do config cycles to - * anything but the PHB. Only allow talking to the PHB if this is - * set. - * BIG_ENDIAN - cfg_addr is a big endian register - * BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on - * the PLB4. Effectively disable MRM commands by setting this. - */ -#define PPC_INDIRECT_TYPE_SET_CFG_TYPE 0x00000001 -#define PPC_INDIRECT_TYPE_EXT_REG 0x00000002 -#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004 -#define PPC_INDIRECT_TYPE_NO_PCIE_LINK 0x00000008 -#define PPC_INDIRECT_TYPE_BIG_ENDIAN 0x00000010 -#define PPC_INDIRECT_TYPE_BROKEN_MRM 0x00000020 - u32 indirect_type; -#endif /* !CONFIG_PPC64 */ - /* Currently, we limit ourselves to 1 IO range and 3 mem - * ranges since the common pci_bus structure can't handle more - */ - struct resource io_resource; - struct resource mem_resources[3]; - int global_number; /* PCI domain number */ -#ifdef CONFIG_PPC64 - unsigned long buid; - unsigned long dma_window_base_cur; - unsigned long dma_window_size; - - void *private_data; -#endif /* CONFIG_PPC64 */ -}; - -#ifndef CONFIG_PPC64 - -static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) -{ - return bus->sysdata; -} - -static inline int isa_vaddr_is_ioport(void __iomem *address) -{ - /* No specific ISA handling on ppc32 at this stage, it - * all goes through PCI - */ - return 0; -} - -/* These are used for config access before all the PCI probing - has been done. */ -extern int early_read_config_byte(struct pci_controller *hose, int bus, - int dev_fn, int where, u8 *val); -extern int early_read_config_word(struct pci_controller *hose, int bus, - int dev_fn, int where, u16 *val); -extern int early_read_config_dword(struct pci_controller *hose, int bus, - int dev_fn, int where, u32 *val); -extern int early_write_config_byte(struct pci_controller *hose, int bus, - int dev_fn, int where, u8 val); -extern int early_write_config_word(struct pci_controller *hose, int bus, - int dev_fn, int where, u16 val); -extern int early_write_config_dword(struct pci_controller *hose, int bus, - int dev_fn, int where, u32 val); - -extern int early_find_capability(struct pci_controller *hose, int bus, - int dev_fn, int cap); - -extern void setup_indirect_pci(struct pci_controller* hose, - resource_size_t cfg_addr, - resource_size_t cfg_data, u32 flags); -extern void setup_grackle(struct pci_controller *hose); -#else /* CONFIG_PPC64 */ - -/* - * PCI stuff, for nodes representing PCI devices, pointed to - * by device_node->data. - */ -struct iommu_table; - -struct pci_dn { - int busno; /* pci bus number */ - int devfn; /* pci device and function number */ - - struct pci_controller *phb; /* for pci devices */ - struct iommu_table *iommu_table; /* for phb's or bridges */ - struct device_node *node; /* back-pointer to the device_node */ - - int pci_ext_config_space; /* for pci devices */ - -#ifdef CONFIG_EEH - struct pci_dev *pcidev; /* back-pointer to the pci device */ - int class_code; /* pci device class */ - int eeh_mode; /* See eeh.h for possible EEH_MODEs */ - int eeh_config_addr; - int eeh_pe_config_addr; /* new-style partition endpoint address */ - int eeh_check_count; /* # times driver ignored error */ - int eeh_freeze_count; /* # times this device froze up. */ - int eeh_false_positives; /* # times this device reported #ff's */ - u32 config_space[16]; /* saved PCI config space */ -#endif -}; - -/* Get the pointer to a device_node's pci_dn */ -#define PCI_DN(dn) ((struct pci_dn *) (dn)->data) - -extern struct device_node *fetch_dev_dn(struct pci_dev *dev); - -/* Get a device_node from a pci_dev. This code must be fast except - * in the case where the sysdata is incorrect and needs to be fixed - * up (this will only happen once). - * In this case the sysdata will have been inherited from a PCI host - * bridge or a PCI-PCI bridge further up the tree, so it will point - * to a valid struct pci_dn, just not the one we want. - */ -static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev) -{ - struct device_node *dn = dev->sysdata; - struct pci_dn *pdn = dn->data; - - if (pdn && pdn->devfn == dev->devfn && pdn->busno == dev->bus->number) - return dn; /* fast path. sysdata is good */ - return fetch_dev_dn(dev); -} - -static inline int pci_device_from_OF_node(struct device_node *np, - u8 *bus, u8 *devfn) -{ - if (!PCI_DN(np)) - return -ENODEV; - *bus = PCI_DN(np)->busno; - *devfn = PCI_DN(np)->devfn; - return 0; -} - -static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) -{ - if (bus->self) - return pci_device_to_OF_node(bus->self); - else - return bus->sysdata; /* Must be root bus (PHB) */ -} - -/** Find the bus corresponding to the indicated device node */ -extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn); - -/** Remove all of the PCI devices under this bus */ -extern void pcibios_remove_pci_devices(struct pci_bus *bus); - -/** Discover new pci devices under this bus, and add them */ -extern void pcibios_add_pci_devices(struct pci_bus *bus); -extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus); - -extern int pcibios_remove_root_bus(struct pci_controller *phb); - -static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) -{ - struct device_node *busdn = bus->sysdata; - - BUG_ON(busdn == NULL); - return PCI_DN(busdn)->phb; -} - - -extern void isa_bridge_find_early(struct pci_controller *hose); - -static inline int isa_vaddr_is_ioport(void __iomem *address) -{ - /* Check if address hits the reserved legacy IO range */ - unsigned long ea = (unsigned long)address; - return ea >= ISA_IO_BASE && ea < ISA_IO_END; -} - -extern int pcibios_unmap_io_space(struct pci_bus *bus); -extern int pcibios_map_io_space(struct pci_bus *bus); - -/* Return values for ppc_md.pci_probe_mode function */ -#define PCI_PROBE_NONE -1 /* Don't look at this bus at all */ -#define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */ -#define PCI_PROBE_DEVTREE 1 /* Instantiate from device tree */ - -#ifdef CONFIG_NUMA -#define PHB_SET_NODE(PHB, NODE) ((PHB)->node = (NODE)) -#else -#define PHB_SET_NODE(PHB, NODE) ((PHB)->node = -1) -#endif - -#endif /* CONFIG_PPC64 */ - -/* Get the PCI host controller for an OF device */ -extern struct pci_controller *pci_find_hose_for_OF_device( - struct device_node* node); - -/* Fill up host controller resources from the OF node */ -extern void pci_process_bridge_OF_ranges(struct pci_controller *hose, - struct device_node *dev, int primary); - -/* Allocate & free a PCI host bridge structure */ -extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev); -extern void pcibios_free_controller(struct pci_controller *phb); - -#ifdef CONFIG_PCI -extern unsigned long pci_address_to_pio(phys_addr_t address); -extern int pcibios_vaddr_is_ioport(void __iomem *address); -#else -static inline unsigned long pci_address_to_pio(phys_addr_t address) -{ - return (unsigned long)-1; -} -static inline int pcibios_vaddr_is_ioport(void __iomem *address) -{ - return 0; -} -#endif /* CONFIG_PCI */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_PCI_BRIDGE_H */ diff --git a/include/asm-powerpc/pci.h b/include/asm-powerpc/pci.h deleted file mode 100644 index a05a942b1c25..000000000000 --- a/include/asm-powerpc/pci.h +++ /dev/null @@ -1,228 +0,0 @@ -#ifndef __ASM_POWERPC_PCI_H -#define __ASM_POWERPC_PCI_H -#ifdef __KERNEL__ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -#define PCIBIOS_MIN_IO 0x1000 -#define PCIBIOS_MIN_MEM 0x10000000 - -struct pci_dev; - -/* Values for the `which' argument to sys_pciconfig_iobase syscall. */ -#define IOBASE_BRIDGE_NUMBER 0 -#define IOBASE_MEMORY 1 -#define IOBASE_IO 2 -#define IOBASE_ISA_IO 3 -#define IOBASE_ISA_MEM 4 - -/* - * Set this to 1 if you want the kernel to re-assign all PCI - * bus numbers (don't do that on ppc64 yet !) - */ -#define pcibios_assign_all_busses() (ppc_pci_flags & \ - PPC_PCI_REASSIGN_ALL_BUS) -#define pcibios_scan_all_fns(a, b) 0 - -static inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} - -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - -#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ -static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) -{ - if (ppc_md.pci_get_legacy_ide_irq) - return ppc_md.pci_get_legacy_ide_irq(dev, channel); - return channel ? 15 : 14; -} - -#ifdef CONFIG_PPC64 - -/* - * We want to avoid touching the cacheline size or MWI bit. - * pSeries firmware sets the cacheline size (which is not the cpu cacheline - * size in all cases) and hardware treats MWI the same as memory write. - */ -#define PCI_DISABLE_MWI - -#ifdef CONFIG_PCI -extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops); -extern struct dma_mapping_ops *get_pci_dma_ops(void); - -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - unsigned long cacheline_size; - u8 byte; - - pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte); - if (byte == 0) - cacheline_size = 1024; - else - cacheline_size = (int) byte * 4; - - *strat = PCI_DMA_BURST_MULTIPLE; - *strategy_parameter = cacheline_size; -} -#else /* CONFIG_PCI */ -#define set_pci_dma_ops(d) -#define get_pci_dma_ops() NULL -#endif - -#else /* 32-bit */ - -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - *strat = PCI_DMA_BURST_INFINITY; - *strategy_parameter = ~0UL; -} -#endif -#endif /* CONFIG_PPC64 */ - -extern int pci_domain_nr(struct pci_bus *bus); - -/* Decide whether to display the domain number in /proc */ -extern int pci_proc_domain(struct pci_bus *bus); - - -struct vm_area_struct; -/* Map a range of PCI memory or I/O space for a device into user space */ -int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine); - -/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */ -#define HAVE_PCI_MMAP 1 - -#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE) -/* - * For 64-bit kernels, pci_unmap_{single,page} is not a nop. - * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and - * so on are not nops. - * and thus... - */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ - dma_addr_t ADDR_NAME; -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ - __u32 LEN_NAME; -#define pci_unmap_addr(PTR, ADDR_NAME) \ - ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ - (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) \ - ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ - (((PTR)->LEN_NAME) = (VAL)) - -#else /* 32-bit && coherent */ - -/* pci_unmap_{page,single} is a nop so... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) - -#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */ - -#ifdef CONFIG_PPC64 - -/* The PCI address space does not equal the physical memory address - * space (we have an IOMMU). The IDE and SCSI device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (0) - -#else /* 32-bit */ - -/* The PCI address space does equal the physical memory - * address space (no IOMMU). The IDE and SCSI device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (1) - -#endif /* CONFIG_PPC64 */ - -extern void pcibios_resource_to_bus(struct pci_dev *dev, - struct pci_bus_region *region, - struct resource *res); - -extern void pcibios_bus_to_resource(struct pci_dev *dev, - struct resource *res, - struct pci_bus_region *region); - -static inline struct resource *pcibios_select_root(struct pci_dev *pdev, - struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - -extern void pcibios_setup_new_device(struct pci_dev *dev); - -extern void pcibios_claim_one_bus(struct pci_bus *b); - -extern void pcibios_resource_survey(void); - -extern struct pci_controller *init_phb_dynamic(struct device_node *dn); - -extern struct pci_dev *of_create_pci_dev(struct device_node *node, - struct pci_bus *bus, int devfn); - -extern void of_scan_pci_bridge(struct device_node *node, - struct pci_dev *dev); - -extern void of_scan_bus(struct device_node *node, struct pci_bus *bus); - -extern int pci_read_irq_line(struct pci_dev *dev); - -struct file; -extern pgprot_t pci_phys_mem_access_prot(struct file *file, - unsigned long pfn, - unsigned long size, - pgprot_t prot); - -#define HAVE_ARCH_PCI_RESOURCE_TO_USER -extern void pci_resource_to_user(const struct pci_dev *dev, int bar, - const struct resource *rsrc, - resource_size_t *start, resource_size_t *end); - -extern void pcibios_do_bus_setup(struct pci_bus *bus); -extern void pcibios_fixup_of_probed_bus(struct pci_bus *bus); - -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_PCI_H */ diff --git a/include/asm-powerpc/percpu.h b/include/asm-powerpc/percpu.h deleted file mode 100644 index f879252b7ea6..000000000000 --- a/include/asm-powerpc/percpu.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _ASM_POWERPC_PERCPU_H_ -#define _ASM_POWERPC_PERCPU_H_ -#ifdef __powerpc64__ -#include - -/* - * Same as asm-generic/percpu.h, except that we store the per cpu offset - * in the paca. Based on the x86-64 implementation. - */ - -#ifdef CONFIG_SMP - -#include - -#define __per_cpu_offset(cpu) (paca[cpu].data_offset) -#define __my_cpu_offset local_paca->data_offset -#define per_cpu_offset(x) (__per_cpu_offset(x)) - -#endif /* CONFIG_SMP */ -#endif /* __powerpc64__ */ - -#include - -#endif /* _ASM_POWERPC_PERCPU_H_ */ diff --git a/include/asm-powerpc/pgalloc-32.h b/include/asm-powerpc/pgalloc-32.h deleted file mode 100644 index 58c07147b3ea..000000000000 --- a/include/asm-powerpc/pgalloc-32.h +++ /dev/null @@ -1,43 +0,0 @@ -#ifndef _ASM_POWERPC_PGALLOC_32_H -#define _ASM_POWERPC_PGALLOC_32_H - -#include - -extern void __bad_pte(pmd_t *pmd); - -extern pgd_t *pgd_alloc(struct mm_struct *mm); -extern void pgd_free(struct mm_struct *mm, pgd_t *pgd); - -/* - * We don't have any real pmd's, and this code never triggers because - * the pgd will always be present.. - */ -/* #define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) */ -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb,x) do { } while (0) -/* #define pgd_populate(mm, pmd, pte) BUG() */ - -#ifndef CONFIG_BOOKE -#define pmd_populate_kernel(mm, pmd, pte) \ - (pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT) -#define pmd_populate(mm, pmd, pte) \ - (pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT) -#define pmd_pgtable(pmd) pmd_page(pmd) -#else -#define pmd_populate_kernel(mm, pmd, pte) \ - (pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT) -#define pmd_populate(mm, pmd, pte) \ - (pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT) -#define pmd_pgtable(pmd) pmd_page(pmd) -#endif - -extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr); -extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr); -extern void pte_free_kernel(struct mm_struct *mm, pte_t *pte); -extern void pte_free(struct mm_struct *mm, pgtable_t pte); - -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte)) - -#define check_pgt_cache() do { } while (0) - -#endif /* _ASM_POWERPC_PGALLOC_32_H */ diff --git a/include/asm-powerpc/pgalloc-64.h b/include/asm-powerpc/pgalloc-64.h deleted file mode 100644 index 812a1d8f35cb..000000000000 --- a/include/asm-powerpc/pgalloc-64.h +++ /dev/null @@ -1,166 +0,0 @@ -#ifndef _ASM_POWERPC_PGALLOC_64_H -#define _ASM_POWERPC_PGALLOC_64_H -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include - -#ifndef CONFIG_PPC_SUBPAGE_PROT -static inline void subpage_prot_free(pgd_t *pgd) {} -#endif - -extern struct kmem_cache *pgtable_cache[]; - -#define PGD_CACHE_NUM 0 -#define PUD_CACHE_NUM 1 -#define PMD_CACHE_NUM 1 -#define HUGEPTE_CACHE_NUM 2 -#define PTE_NONCACHE_NUM 7 /* from GFP rather than kmem_cache */ - -static inline pgd_t *pgd_alloc(struct mm_struct *mm) -{ - return kmem_cache_alloc(pgtable_cache[PGD_CACHE_NUM], GFP_KERNEL); -} - -static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - subpage_prot_free(pgd); - kmem_cache_free(pgtable_cache[PGD_CACHE_NUM], pgd); -} - -#ifndef CONFIG_PPC_64K_PAGES - -#define pgd_populate(MM, PGD, PUD) pgd_set(PGD, PUD) - -static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) -{ - return kmem_cache_alloc(pgtable_cache[PUD_CACHE_NUM], - GFP_KERNEL|__GFP_REPEAT); -} - -static inline void pud_free(struct mm_struct *mm, pud_t *pud) -{ - kmem_cache_free(pgtable_cache[PUD_CACHE_NUM], pud); -} - -static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) -{ - pud_set(pud, (unsigned long)pmd); -} - -#define pmd_populate(mm, pmd, pte_page) \ - pmd_populate_kernel(mm, pmd, page_address(pte_page)) -#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, (unsigned long)(pte)) -#define pmd_pgtable(pmd) pmd_page(pmd) - - -#else /* CONFIG_PPC_64K_PAGES */ - -#define pud_populate(mm, pud, pmd) pud_set(pud, (unsigned long)pmd) - -static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, - pte_t *pte) -{ - pmd_set(pmd, (unsigned long)pte); -} - -#define pmd_populate(mm, pmd, pte_page) \ - pmd_populate_kernel(mm, pmd, page_address(pte_page)) -#define pmd_pgtable(pmd) pmd_page(pmd) - -#endif /* CONFIG_PPC_64K_PAGES */ - -static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) -{ - return kmem_cache_alloc(pgtable_cache[PMD_CACHE_NUM], - GFP_KERNEL|__GFP_REPEAT); -} - -static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) -{ - kmem_cache_free(pgtable_cache[PMD_CACHE_NUM], pmd); -} - -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long address) -{ - return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); -} - -static inline pgtable_t pte_alloc_one(struct mm_struct *mm, - unsigned long address) -{ - struct page *page; - pte_t *pte; - - pte = pte_alloc_one_kernel(mm, address); - if (!pte) - return NULL; - page = virt_to_page(pte); - pgtable_page_ctor(page); - return page; -} - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - free_page((unsigned long)pte); -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage) -{ - pgtable_page_dtor(ptepage); - __free_page(ptepage); -} - -#define PGF_CACHENUM_MASK 0x7 - -typedef struct pgtable_free { - unsigned long val; -} pgtable_free_t; - -static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum, - unsigned long mask) -{ - BUG_ON(cachenum > PGF_CACHENUM_MASK); - - return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum}; -} - -static inline void pgtable_free(pgtable_free_t pgf) -{ - void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK); - int cachenum = pgf.val & PGF_CACHENUM_MASK; - - if (cachenum == PTE_NONCACHE_NUM) - free_page((unsigned long)p); - else - kmem_cache_free(pgtable_cache[cachenum], p); -} - -extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf); - -#define __pte_free_tlb(tlb,ptepage) \ -do { \ - pgtable_page_dtor(ptepage); \ - pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \ - PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \ -} while (0) -#define __pmd_free_tlb(tlb, pmd) \ - pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \ - PMD_CACHE_NUM, PMD_TABLE_SIZE-1)) -#ifndef CONFIG_PPC_64K_PAGES -#define __pud_free_tlb(tlb, pud) \ - pgtable_free_tlb(tlb, pgtable_free_cache(pud, \ - PUD_CACHE_NUM, PUD_TABLE_SIZE-1)) -#endif /* CONFIG_PPC_64K_PAGES */ - -#define check_pgt_cache() do { } while (0) - -#endif /* _ASM_POWERPC_PGALLOC_64_H */ diff --git a/include/asm-powerpc/pgalloc.h b/include/asm-powerpc/pgalloc.h deleted file mode 100644 index b4505ed0f0f2..000000000000 --- a/include/asm-powerpc/pgalloc.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_POWERPC_PGALLOC_H -#define _ASM_POWERPC_PGALLOC_H -#ifdef __KERNEL__ - -#ifdef CONFIG_PPC64 -#include -#else -#include -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_PGALLOC_H */ diff --git a/include/asm-powerpc/pgtable-4k.h b/include/asm-powerpc/pgtable-4k.h deleted file mode 100644 index 6b18ba9d2d85..000000000000 --- a/include/asm-powerpc/pgtable-4k.h +++ /dev/null @@ -1,117 +0,0 @@ -#ifndef _ASM_POWERPC_PGTABLE_4K_H -#define _ASM_POWERPC_PGTABLE_4K_H -/* - * Entries per page directory level. The PTE level must use a 64b record - * for each page table entry. The PMD and PGD level use a 32b record for - * each entry by assuming that each entry is page aligned. - */ -#define PTE_INDEX_SIZE 9 -#define PMD_INDEX_SIZE 7 -#define PUD_INDEX_SIZE 7 -#define PGD_INDEX_SIZE 9 - -#ifndef __ASSEMBLY__ -#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_INDEX_SIZE) -#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) -#define PUD_TABLE_SIZE (sizeof(pud_t) << PUD_INDEX_SIZE) -#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) -#endif /* __ASSEMBLY__ */ - -#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) -#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) -#define PTRS_PER_PUD (1 << PMD_INDEX_SIZE) -#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) - -/* PMD_SHIFT determines what a second-level page table entry can map */ -#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) - -/* With 4k base page size, hugepage PTEs go at the PMD level */ -#define MIN_HUGEPTE_SHIFT PMD_SHIFT - -/* PUD_SHIFT determines what a third-level page table entry can map */ -#define PUD_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE) -#define PUD_SIZE (1UL << PUD_SHIFT) -#define PUD_MASK (~(PUD_SIZE-1)) - -/* PGDIR_SHIFT determines what a fourth-level page table entry can map */ -#define PGDIR_SHIFT (PUD_SHIFT + PUD_INDEX_SIZE) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* PTE bits */ -#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */ -#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */ -#define _PAGE_GROUP_IX 0x7000 /* software: HPTE index within group */ -#define _PAGE_F_SECOND _PAGE_SECONDARY -#define _PAGE_F_GIX _PAGE_GROUP_IX -#define _PAGE_SPECIAL 0x10000 /* software: special page */ -#define __HAVE_ARCH_PTE_SPECIAL - -/* PTE flags to conserve for HPTE identification */ -#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \ - _PAGE_SECONDARY | _PAGE_GROUP_IX) - -/* There is no 4K PFN hack on 4K pages */ -#define _PAGE_4K_PFN 0 - -/* PAGE_MASK gives the right answer below, but only by accident */ -/* It should be preserving the high 48 bits and then specifically */ -/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */ -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \ - _PAGE_HPTEFLAGS) - -/* Bits to mask out from a PMD to get to the PTE page */ -#define PMD_MASKED_BITS 0 -/* Bits to mask out from a PUD to get to the PMD page */ -#define PUD_MASKED_BITS 0 -/* Bits to mask out from a PGD to get to the PUD page */ -#define PGD_MASKED_BITS 0 - -/* shift to put page number into pte */ -#define PTE_RPN_SHIFT (17) - -#ifdef STRICT_MM_TYPECHECKS -#define __real_pte(e,p) ((real_pte_t){(e)}) -#define __rpte_to_pte(r) ((r).pte) -#else -#define __real_pte(e,p) (e) -#define __rpte_to_pte(r) (__pte(r)) -#endif -#define __rpte_to_hidx(r,index) (pte_val(__rpte_to_pte(r)) >> 12) - -#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \ - do { \ - index = 0; \ - shift = mmu_psize_defs[psize].shift; \ - -#define pte_iterate_hashed_end() } while(0) - -#ifdef CONFIG_PPC_HAS_HASH_64K -#define pte_pagesize_index(mm, addr, pte) get_slice_psize(mm, addr) -#else -#define pte_pagesize_index(mm, addr, pte) MMU_PAGE_4K -#endif - -/* - * 4-level page tables related bits - */ - -#define pgd_none(pgd) (!pgd_val(pgd)) -#define pgd_bad(pgd) (pgd_val(pgd) == 0) -#define pgd_present(pgd) (pgd_val(pgd) != 0) -#define pgd_clear(pgdp) (pgd_val(*(pgdp)) = 0) -#define pgd_page_vaddr(pgd) (pgd_val(pgd) & ~PGD_MASKED_BITS) -#define pgd_page(pgd) virt_to_page(pgd_page_vaddr(pgd)) - -#define pud_offset(pgdp, addr) \ - (((pud_t *) pgd_page_vaddr(*(pgdp))) + \ - (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))) - -#define pud_ERROR(e) \ - printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e)) - -#define remap_4k_pfn(vma, addr, pfn, prot) \ - remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot)) -#endif /* _ASM_POWERPC_PGTABLE_4K_H */ diff --git a/include/asm-powerpc/pgtable-64k.h b/include/asm-powerpc/pgtable-64k.h deleted file mode 100644 index 07b0d8f09cb6..000000000000 --- a/include/asm-powerpc/pgtable-64k.h +++ /dev/null @@ -1,155 +0,0 @@ -#ifndef _ASM_POWERPC_PGTABLE_64K_H -#define _ASM_POWERPC_PGTABLE_64K_H - -#include - - -#define PTE_INDEX_SIZE 12 -#define PMD_INDEX_SIZE 12 -#define PUD_INDEX_SIZE 0 -#define PGD_INDEX_SIZE 4 - -#ifndef __ASSEMBLY__ -#define PTE_TABLE_SIZE (sizeof(real_pte_t) << PTE_INDEX_SIZE) -#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) -#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) - -#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) -#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) -#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) - -#ifdef CONFIG_PPC_SUBPAGE_PROT -/* - * For the sub-page protection option, we extend the PGD with one of - * these. Basically we have a 3-level tree, with the top level being - * the protptrs array. To optimize speed and memory consumption when - * only addresses < 4GB are being protected, pointers to the first - * four pages of sub-page protection words are stored in the low_prot - * array. - * Each page of sub-page protection words protects 1GB (4 bytes - * protects 64k). For the 3-level tree, each page of pointers then - * protects 8TB. - */ -struct subpage_prot_table { - unsigned long maxaddr; /* only addresses < this are protected */ - unsigned int **protptrs[2]; - unsigned int *low_prot[4]; -}; - -#undef PGD_TABLE_SIZE -#define PGD_TABLE_SIZE ((sizeof(pgd_t) << PGD_INDEX_SIZE) + \ - sizeof(struct subpage_prot_table)) - -#define SBP_L1_BITS (PAGE_SHIFT - 2) -#define SBP_L2_BITS (PAGE_SHIFT - 3) -#define SBP_L1_COUNT (1 << SBP_L1_BITS) -#define SBP_L2_COUNT (1 << SBP_L2_BITS) -#define SBP_L2_SHIFT (PAGE_SHIFT + SBP_L1_BITS) -#define SBP_L3_SHIFT (SBP_L2_SHIFT + SBP_L2_BITS) - -extern void subpage_prot_free(pgd_t *pgd); - -static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) -{ - return (struct subpage_prot_table *)(pgd + PTRS_PER_PGD); -} -#endif /* CONFIG_PPC_SUBPAGE_PROT */ -#endif /* __ASSEMBLY__ */ - -/* With 4k base page size, hugepage PTEs go at the PMD level */ -#define MIN_HUGEPTE_SHIFT PAGE_SHIFT - -/* PMD_SHIFT determines what a second-level page table entry can map */ -#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) - -/* PGDIR_SHIFT determines what a third-level page table entry can map */ -#define PGDIR_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* Additional PTE bits (don't change without checking asm in hash_low.S) */ -#define __HAVE_ARCH_PTE_SPECIAL -#define _PAGE_SPECIAL 0x00000400 /* software: special page */ -#define _PAGE_HPTE_SUB 0x0ffff000 /* combo only: sub pages HPTE bits */ -#define _PAGE_HPTE_SUB0 0x08000000 /* combo only: first sub page */ -#define _PAGE_COMBO 0x10000000 /* this is a combo 4k page */ -#define _PAGE_4K_PFN 0x20000000 /* PFN is for a single 4k page */ - -/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead, - * we set that to be the whole sub-bits mask. The C code will only - * test this, so a multi-bit mask will work. For combo pages, this - * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of - * all the sub bits. For real 64k pages, we now have the assembly set - * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap - * that mask. This is fine as long as the HIDX bits are never set on - * a PTE that isn't hashed, which is the case today. - * - * A little nit is for the huge page C code, which does the hashing - * in C, we need to provide which bit to use. - */ -#define _PAGE_HASHPTE _PAGE_HPTE_SUB - -/* Note the full page bits must be in the same location as for normal - * 4k pages as the same asssembly will be used to insert 64K pages - * wether the kernel has CONFIG_PPC_64K_PAGES or not - */ -#define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */ -#define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */ - -/* PTE flags to conserve for HPTE identification */ -#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO) - -/* Shift to put page number into pte. - * - * That gives us a max RPN of 34 bits, which means a max of 50 bits - * of addressable physical space, or 46 bits for the special 4k PFNs. - */ -#define PTE_RPN_SHIFT (30) -#define PTE_RPN_MAX (1UL << (64 - PTE_RPN_SHIFT)) -#define PTE_RPN_MASK (~((1UL<> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf)) -#define __rpte_to_pte(r) ((r).pte) -#define __rpte_sub_valid(rpte, index) \ - (pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index))) - - -/* Trick: we set __end to va + 64k, which happens works for - * a 16M page as well as we want only one iteration - */ -#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \ - do { \ - unsigned long __end = va + PAGE_SIZE; \ - unsigned __split = (psize == MMU_PAGE_4K || \ - psize == MMU_PAGE_64K_AP); \ - shift = mmu_psize_defs[psize].shift; \ - for (index = 0; va < __end; index++, va += (1L << shift)) { \ - if (!__split || __rpte_sub_valid(rpte, index)) do { \ - -#define pte_iterate_hashed_end() } while(0); } } while(0) - -#define pte_pagesize_index(mm, addr, pte) \ - (((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K) - -#define remap_4k_pfn(vma, addr, pfn, prot) \ - remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \ - __pgprot(pgprot_val((prot)) | _PAGE_4K_PFN)) - -#endif /* _ASM_POWERPC_PGTABLE_64K_H */ diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h deleted file mode 100644 index 6fe39e327047..000000000000 --- a/include/asm-powerpc/pgtable-ppc32.h +++ /dev/null @@ -1,802 +0,0 @@ -#ifndef _ASM_POWERPC_PGTABLE_PPC32_H -#define _ASM_POWERPC_PGTABLE_PPC32_H - -#include - -#ifndef __ASSEMBLY__ -#include -#include -#include /* For sub-arch specific PPC_PIN_SIZE */ - -extern unsigned long va_to_phys(unsigned long address); -extern pte_t *va_to_pte(unsigned long address); -extern unsigned long ioremap_bot, ioremap_base; - -#ifdef CONFIG_44x -extern int icache_44x_need_flush; -#endif - -#endif /* __ASSEMBLY__ */ - -/* - * The PowerPC MMU uses a hash table containing PTEs, together with - * a set of 16 segment registers (on 32-bit implementations), to define - * the virtual to physical address mapping. - * - * We use the hash table as an extended TLB, i.e. a cache of currently - * active mappings. We maintain a two-level page table tree, much - * like that used by the i386, for the sake of the Linux memory - * management code. Low-level assembler code in hashtable.S - * (procedure hash_page) is responsible for extracting ptes from the - * tree and putting them into the hash table when necessary, and - * updating the accessed and modified bits in the page table tree. - */ - -/* - * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk. - * We also use the two level tables, but we can put the real bits in them - * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0, - * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has - * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit - * based upon user/super access. The TLB does not have accessed nor write - * protect. We assume that if the TLB get loaded with an entry it is - * accessed, and overload the changed bit for write protect. We use - * two bits in the software pte that are supposed to be set to zero in - * the TLB entry (24 and 25) for these indicators. Although the level 1 - * descriptor contains the guarded and writethrough/copyback bits, we can - * set these at the page level since they get copied from the Mx_TWC - * register when the TLB entry is loaded. We will use bit 27 for guard, since - * that is where it exists in the MD_TWC, and bit 26 for writethrough. - * These will get masked from the level 2 descriptor at TLB load time, and - * copied to the MD_TWC before it gets loaded. - * Large page sizes added. We currently support two sizes, 4K and 8M. - * This also allows a TLB hander optimization because we can directly - * load the PMD into MD_TWC. The 8M pages are only used for kernel - * mapping of well known areas. The PMD (PGD) entries contain control - * flags in addition to the address, so care must be taken that the - * software no longer assumes these are only pointers. - */ - -/* - * At present, all PowerPC 400-class processors share a similar TLB - * architecture. The instruction and data sides share a unified, - * 64-entry, fully-associative TLB which is maintained totally under - * software control. In addition, the instruction side has a - * hardware-managed, 4-entry, fully-associative TLB which serves as a - * first level to the shared TLB. These two TLBs are known as the UTLB - * and ITLB, respectively (see "mmu.h" for definitions). - */ - -/* - * The normal case is that PTEs are 32-bits and we have a 1-page - * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus - * - * For any >32-bit physical address platform, we can use the following - * two level page table layout where the pgdir is 8KB and the MS 13 bits - * are an index to the second level table. The combined pgdir/pmd first - * level has 2048 entries and the second level has 512 64-bit PTE entries. - * -Matt - */ -/* PGDIR_SHIFT determines what a top-level page table entry can map */ -#define PGDIR_SHIFT (PAGE_SHIFT + PTE_SHIFT) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* - * entries per page directory level: our page-table tree is two-level, so - * we don't really have any PMD directory. - */ -#ifndef __ASSEMBLY__ -#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_SHIFT) -#define PGD_TABLE_SIZE (sizeof(pgd_t) << (32 - PGDIR_SHIFT)) -#endif /* __ASSEMBLY__ */ - -#define PTRS_PER_PTE (1 << PTE_SHIFT) -#define PTRS_PER_PMD 1 -#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT)) - -#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \ - (unsigned long long)pte_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - -/* - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 64MB value just means that there will be a 64MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - * - * We no longer map larger than phys RAM with the BATs so we don't have - * to worry about the VMALLOC_OFFSET causing problems. We do have to worry - * about clashes between our early calls to ioremap() that start growing down - * from ioremap_base being run into the VM area allocations (growing upwards - * from VMALLOC_START). For this reason we have ioremap_bot to check when - * we actually run into our mappings setup in the early boot with the VM - * system. This really does become a problem for machines with good amounts - * of RAM. -- Cort - */ -#define VMALLOC_OFFSET (0x1000000) /* 16M */ -#ifdef PPC_PIN_SIZE -#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) -#else -#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) -#endif -#define VMALLOC_END ioremap_bot - -/* - * Bits in a linux-style PTE. These match the bits in the - * (hardware-defined) PowerPC PTE as closely as possible. - */ - -#if defined(CONFIG_40x) - -/* There are several potential gotchas here. The 40x hardware TLBLO - field looks like this: - - 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - RPN..................... 0 0 EX WR ZSEL....... W I M G - - Where possible we make the Linux PTE bits match up with this - - - bits 20 and 21 must be cleared, because we use 4k pages (40x can - support down to 1k pages), this is done in the TLBMiss exception - handler. - - We use only zones 0 (for kernel pages) and 1 (for user pages) - of the 16 available. Bit 24-26 of the TLB are cleared in the TLB - miss handler. Bit 27 is PAGE_USER, thus selecting the correct - zone. - - PRESENT *must* be in the bottom two bits because swap cache - entries use the top 30 bits. Because 40x doesn't support SMP - anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30 - is cleared in the TLB miss handler before the TLB entry is loaded. - - All other bits of the PTE are loaded into TLBLO without - modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for - software PTE bits. We actually use use bits 21, 24, 25, and - 30 respectively for the software bits: ACCESSED, DIRTY, RW, and - PRESENT. -*/ - -/* Definitions for 40x embedded chips. */ -#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */ -#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */ -#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */ -#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */ -#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */ -#define _PAGE_USER 0x010 /* matches one of the zone permission bits */ -#define _PAGE_RW 0x040 /* software: Writes permitted */ -#define _PAGE_DIRTY 0x080 /* software: dirty page */ -#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */ -#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */ -#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */ - -#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */ -#define _PMD_BAD 0x802 -#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */ -#define _PMD_SIZE_4M 0x0c0 -#define _PMD_SIZE_16M 0x0e0 -#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4)) - -/* Until my rework is finished, 40x still needs atomic PTE updates */ -#define PTE_ATOMIC_UPDATES 1 - -#elif defined(CONFIG_44x) -/* - * Definitions for PPC440 - * - * Because of the 3 word TLB entries to support 36-bit addressing, - * the attribute are difficult to map in such a fashion that they - * are easily loaded during exception processing. I decided to - * organize the entry so the ERPN is the only portion in the - * upper word of the PTE and the attribute bits below are packed - * in as sensibly as they can be in the area below a 4KB page size - * oriented RPN. This at least makes it easy to load the RPN and - * ERPN fields in the TLB. -Matt - * - * Note that these bits preclude future use of a page size - * less than 4KB. - * - * - * PPC 440 core has following TLB attribute fields; - * - * TLB1: - * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - * RPN................................. - - - - - - ERPN....... - * - * TLB2: - * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR - * - * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional - * TLB2 storage attibute fields. Those are: - * - * TLB2: - * 0...10 11 12 13 14 15 16...31 - * no change WL1 IL1I IL1D IL2I IL2D no change - * - * There are some constrains and options, to decide mapping software bits - * into TLB entry. - * - * - PRESENT *must* be in the bottom three bits because swap cache - * entries use the top 29 bits for TLB2. - * - * - FILE *must* be in the bottom three bits because swap cache - * entries use the top 29 bits for TLB2. - * - * - CACHE COHERENT bit (M) has no effect on PPC440 core, because it - * doesn't support SMP. So we can use this as software bit, like - * DIRTY. - * - * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used - * for memory protection related functions (see PTE structure in - * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the - * above bits. Note that the bit values are CPU specific, not architecture - * specific. - * - * The kernel PTE entry holds an arch-dependent swp_entry structure under - * certain situations. In other words, in such situations some portion of - * the PTE bits are used as a swp_entry. In the PPC implementation, the - * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still - * hold protection values. That means the three protection bits are - * reserved for both PTE and SWAP entry at the most significant three - * LSBs. - * - * There are three protection bits available for SWAP entry: - * _PAGE_PRESENT - * _PAGE_FILE - * _PAGE_HASHPTE (if HW has) - * - * So those three bits have to be inside of 0-2nd LSB of PTE. - * - */ - -#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */ -#define _PAGE_RW 0x00000002 /* S: Write permission */ -#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */ -#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */ -#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */ -#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */ -#define _PAGE_USER 0x00000040 /* S: User page */ -#define _PAGE_ENDIAN 0x00000080 /* H: E bit */ -#define _PAGE_GUARDED 0x00000100 /* H: G bit */ -#define _PAGE_COHERENT 0x00000200 /* H: M bit */ -#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */ -#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */ - -/* TODO: Add large page lowmem mapping support */ -#define _PMD_PRESENT 0 -#define _PMD_PRESENT_MASK (PAGE_MASK) -#define _PMD_BAD (~PAGE_MASK) - -/* ERPN in a PTE never gets cleared, ignore it */ -#define _PTE_NONE_MASK 0xffffffff00000000ULL - - -#elif defined(CONFIG_FSL_BOOKE) -/* - MMU Assist Register 3: - - 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63 - RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR - - - PRESENT *must* be in the bottom three bits because swap cache - entries use the top 29 bits. - - - FILE *must* be in the bottom three bits because swap cache - entries use the top 29 bits. -*/ - -/* Definitions for FSL Book-E Cores */ -#define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */ -#define _PAGE_USER 0x00002 /* S: User page (maps to UR) */ -#define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */ -#define _PAGE_RW 0x00004 /* S: Write permission (SW) */ -#define _PAGE_DIRTY 0x00008 /* S: Page dirty */ -#define _PAGE_HWEXEC 0x00010 /* H: SX permission */ -#define _PAGE_ACCESSED 0x00020 /* S: Page referenced */ - -#define _PAGE_ENDIAN 0x00040 /* H: E bit */ -#define _PAGE_GUARDED 0x00080 /* H: G bit */ -#define _PAGE_COHERENT 0x00100 /* H: M bit */ -#define _PAGE_NO_CACHE 0x00200 /* H: I bit */ -#define _PAGE_WRITETHRU 0x00400 /* H: W bit */ - -#ifdef CONFIG_PTE_64BIT -/* ERPN in a PTE never gets cleared, ignore it */ -#define _PTE_NONE_MASK 0xffffffffffff0000ULL -#endif - -#define _PMD_PRESENT 0 -#define _PMD_PRESENT_MASK (PAGE_MASK) -#define _PMD_BAD (~PAGE_MASK) - -#elif defined(CONFIG_8xx) -/* Definitions for 8xx embedded chips. */ -#define _PAGE_PRESENT 0x0001 /* Page is valid */ -#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */ -#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */ -#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */ - -/* These five software bits must be masked out when the entry is loaded - * into the TLB. - */ -#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */ -#define _PAGE_GUARDED 0x0010 /* software: guarded access */ -#define _PAGE_DIRTY 0x0020 /* software: page changed */ -#define _PAGE_RW 0x0040 /* software: user write access allowed */ -#define _PAGE_ACCESSED 0x0080 /* software: page referenced */ - -/* Setting any bits in the nibble with the follow two controls will - * require a TLB exception handler change. It is assumed unused bits - * are always zero. - */ -#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */ -#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */ - -#define _PMD_PRESENT 0x0001 -#define _PMD_BAD 0x0ff0 -#define _PMD_PAGE_MASK 0x000c -#define _PMD_PAGE_8M 0x000c - -#define _PTE_NONE_MASK _PAGE_ACCESSED - -/* Until my rework is finished, 8xx still needs atomic PTE updates */ -#define PTE_ATOMIC_UPDATES 1 - -#else /* CONFIG_6xx */ -/* Definitions for 60x, 740/750, etc. */ -#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */ -#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */ -#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */ -#define _PAGE_USER 0x004 /* usermode access allowed */ -#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */ -#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */ -#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */ -#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */ -#define _PAGE_DIRTY 0x080 /* C: page changed */ -#define _PAGE_ACCESSED 0x100 /* R: page referenced */ -#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */ -#define _PAGE_RW 0x400 /* software: user write access allowed */ - -#define _PTE_NONE_MASK _PAGE_HASHPTE - -#define _PMD_PRESENT 0 -#define _PMD_PRESENT_MASK (PAGE_MASK) -#define _PMD_BAD (~PAGE_MASK) - -/* Hash table based platforms need atomic updates of the linux PTE */ -#define PTE_ATOMIC_UPDATES 1 - -#endif - -/* - * Some bits are only used on some cpu families... - */ -#ifndef _PAGE_HASHPTE -#define _PAGE_HASHPTE 0 -#endif -#ifndef _PTE_NONE_MASK -#define _PTE_NONE_MASK 0 -#endif -#ifndef _PAGE_SHARED -#define _PAGE_SHARED 0 -#endif -#ifndef _PAGE_HWWRITE -#define _PAGE_HWWRITE 0 -#endif -#ifndef _PAGE_HWEXEC -#define _PAGE_HWEXEC 0 -#endif -#ifndef _PAGE_EXEC -#define _PAGE_EXEC 0 -#endif -#ifndef _PAGE_ENDIAN -#define _PAGE_ENDIAN 0 -#endif -#ifndef _PAGE_COHERENT -#define _PAGE_COHERENT 0 -#endif -#ifndef _PAGE_WRITETHRU -#define _PAGE_WRITETHRU 0 -#endif -#ifndef _PMD_PRESENT_MASK -#define _PMD_PRESENT_MASK _PMD_PRESENT -#endif -#ifndef _PMD_SIZE -#define _PMD_SIZE 0 -#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE() -#endif - -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) - - -#define PAGE_PROT_BITS __pgprot(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \ - _PAGE_WRITETHRU | _PAGE_ENDIAN | \ - _PAGE_USER | _PAGE_ACCESSED | \ - _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \ - _PAGE_EXEC | _PAGE_HWEXEC) -/* - * Note: the _PAGE_COHERENT bit automatically gets set in the hardware - * PTE if CONFIG_SMP is defined (hash_page does this); there is no need - * to have it in the Linux PTE, and in fact the bit could be reused for - * another purpose. -- paulus. - */ - -#ifdef CONFIG_44x -#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED) -#else -#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED) -#endif -#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE) -#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE) - -#ifdef CONFIG_PPC_STD_MMU -/* On standard PPC MMU, no user access implies kernel read/write access, - * so to write-protect kernel memory we must turn on user access */ -#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED | _PAGE_USER) -#else -#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED) -#endif - -#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED) -#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC) - -#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\ - defined(CONFIG_KPROBES) -/* We want the debuggers to be able to set breakpoints anywhere, so - * don't write protect the kernel text */ -#define _PAGE_RAM_TEXT _PAGE_RAM -#else -#define _PAGE_RAM_TEXT (_PAGE_KERNEL_RO | _PAGE_HWEXEC) -#endif - -#define PAGE_NONE __pgprot(_PAGE_BASE) -#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) -#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) -#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW) -#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC) -#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) -#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) - -#define PAGE_KERNEL __pgprot(_PAGE_RAM) -#define PAGE_KERNEL_NOCACHE __pgprot(_PAGE_IO) - -/* - * The PowerPC can only do execute protection on a segment (256MB) basis, - * not on a page basis. So we consider execute permission the same as read. - * Also, write permissions imply read permissions. - * This is the closest we can get.. - */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY_X -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY_X -#define __P100 PAGE_READONLY -#define __P101 PAGE_READONLY_X -#define __P110 PAGE_COPY -#define __P111 PAGE_COPY_X - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY_X -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED_X -#define __S100 PAGE_READONLY -#define __S101 PAGE_READONLY_X -#define __S110 PAGE_SHARED -#define __S111 PAGE_SHARED_X - -#ifndef __ASSEMBLY__ -/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a - * kernel without large page PMD support */ -extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); - -/* - * Conversions between PTE values and page frame numbers. - */ - -/* in some case we want to additionaly adjust where the pfn is in the pte to - * allow room for more flags */ -#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT) -#define PFN_SHIFT_OFFSET (PAGE_SHIFT + 8) -#else -#define PFN_SHIFT_OFFSET (PAGE_SHIFT) -#endif - -#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET) -#define pte_page(x) pfn_to_page(pte_pfn(x)) - -#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\ - pgprot_val(prot)) -#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot) -#endif /* __ASSEMBLY__ */ - -#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0) -#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) -#define pte_clear(mm,addr,ptep) do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0) - -#define pmd_none(pmd) (!pmd_val(pmd)) -#define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD) -#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK) -#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0) - -#ifndef __ASSEMBLY__ -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; } -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } -static inline int pte_special(pte_t pte) { return 0; } - -static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; } -static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; } - -static inline pte_t pte_wrprotect(pte_t pte) { - pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; } -static inline pte_t pte_mkclean(pte_t pte) { - pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; } -static inline pte_t pte_mkold(pte_t pte) { - pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } - -static inline pte_t pte_mkwrite(pte_t pte) { - pte_val(pte) |= _PAGE_RW; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { - pte_val(pte) |= _PAGE_DIRTY; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { - pte_val(pte) |= _PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkspecial(pte_t pte) { - return pte; } -static inline unsigned long pte_pgprot(pte_t pte) -{ - return __pgprot(pte_val(pte)) & PAGE_PROT_BITS; -} - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); - return pte; -} - -/* - * When flushing the tlb entry for a page, we also need to flush the hash - * table entry. flush_hash_pages is assembler (for speed) in hashtable.S. - */ -extern int flush_hash_pages(unsigned context, unsigned long va, - unsigned long pmdval, int count); - -/* Add an HPTE to the hash table */ -extern void add_hash_page(unsigned context, unsigned long va, - unsigned long pmdval); - -/* - * Atomic PTE updates. - * - * pte_update clears and sets bit atomically, and returns - * the old pte value. In the 64-bit PTE case we lock around the - * low PTE word since we expect ALL flag bits to be there - */ -#ifndef CONFIG_PTE_64BIT -static inline unsigned long pte_update(pte_t *p, - unsigned long clr, - unsigned long set) -{ -#ifdef PTE_ATOMIC_UPDATES - unsigned long old, tmp; - - __asm__ __volatile__("\ -1: lwarx %0,0,%3\n\ - andc %1,%0,%4\n\ - or %1,%1,%5\n" - PPC405_ERR77(0,%3) -" stwcx. %1,0,%3\n\ - bne- 1b" - : "=&r" (old), "=&r" (tmp), "=m" (*p) - : "r" (p), "r" (clr), "r" (set), "m" (*p) - : "cc" ); -#else /* PTE_ATOMIC_UPDATES */ - unsigned long old = pte_val(*p); - *p = __pte((old & ~clr) | set); -#endif /* !PTE_ATOMIC_UPDATES */ - -#ifdef CONFIG_44x - if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) - icache_44x_need_flush = 1; -#endif - return old; -} -#else /* CONFIG_PTE_64BIT */ -/* TODO: Change that to only modify the low word and move set_pte_at() - * out of line - */ -static inline unsigned long long pte_update(pte_t *p, - unsigned long clr, - unsigned long set) -{ -#ifdef PTE_ATOMIC_UPDATES - unsigned long long old; - unsigned long tmp; - - __asm__ __volatile__("\ -1: lwarx %L0,0,%4\n\ - lwzx %0,0,%3\n\ - andc %1,%L0,%5\n\ - or %1,%1,%6\n" - PPC405_ERR77(0,%3) -" stwcx. %1,0,%4\n\ - bne- 1b" - : "=&r" (old), "=&r" (tmp), "=m" (*p) - : "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p) - : "cc" ); -#else /* PTE_ATOMIC_UPDATES */ - unsigned long long old = pte_val(*p); - *p = __pte((old & ~(unsigned long long)clr) | set); -#endif /* !PTE_ATOMIC_UPDATES */ - -#ifdef CONFIG_44x - if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) - icache_44x_need_flush = 1; -#endif - return old; -} -#endif /* CONFIG_PTE_64BIT */ - -/* - * set_pte stores a linux PTE into the linux page table. - * On machines which use an MMU hash table we avoid changing the - * _PAGE_HASHPTE bit. - */ -static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) -{ -#if _PAGE_HASHPTE != 0 - pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE); -#else - *ptep = pte; -#endif -} - -/* - * 2.6 calls this without flushing the TLB entry; this is wrong - * for our hash-based implementation, we fix that up here. - */ -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep) -{ - unsigned long old; - old = pte_update(ptep, _PAGE_ACCESSED, 0); -#if _PAGE_HASHPTE != 0 - if (old & _PAGE_HASHPTE) { - unsigned long ptephys = __pa(ptep) & PAGE_MASK; - flush_hash_pages(context, addr, ptephys, 1); - } -#endif - return (old & _PAGE_ACCESSED) != 0; -} -#define ptep_test_and_clear_young(__vma, __addr, __ptep) \ - __ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep) - -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, - pte_t *ptep) -{ - return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0)); -} - -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, - pte_t *ptep) -{ - pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0); -} -static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - ptep_set_wrprotect(mm, addr, ptep); -} - - -#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS -static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) -{ - unsigned long bits = pte_val(entry) & - (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW); - pte_update(ptep, 0, bits); -} - -#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ -({ \ - int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ - __ptep_set_access_flags(__ptep, __entry, __dirty); \ - flush_tlb_page_nohash(__vma, __address); \ - } \ - __changed; \ -}) - -/* - * Macro to mark a page protection value as "uncacheable". - */ -#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED)) - -struct file; -extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, - unsigned long size, pgprot_t vma_prot); -#define __HAVE_PHYS_MEM_ACCESS_PROT - -#define __HAVE_ARCH_PTE_SAME -#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0) - -/* - * Note that on Book E processors, the pmd contains the kernel virtual - * (lowmem) address of the pte page. The physical address is less useful - * because everything runs with translation enabled (even the TLB miss - * handler). On everything else the pmd contains the physical address - * of the pte page. -- paulus - */ -#ifndef CONFIG_BOOKE -#define pmd_page_vaddr(pmd) \ - ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) -#define pmd_page(pmd) \ - (mem_map + (pmd_val(pmd) >> PAGE_SHIFT)) -#else -#define pmd_page_vaddr(pmd) \ - ((unsigned long) (pmd_val(pmd) & PAGE_MASK)) -#define pmd_page(pmd) \ - pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT)) -#endif - -/* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* to find an entry in a page-table-directory */ -#define pgd_index(address) ((address) >> PGDIR_SHIFT) -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) - -/* Find an entry in the third-level page table.. */ -#define pte_index(address) \ - (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset_kernel(dir, addr) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr)) -#define pte_offset_map(dir, addr) \ - ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr)) -#define pte_offset_map_nested(dir, addr) \ - ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr)) - -#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0) -#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1) - -/* - * Encode and decode a swap entry. - * Note that the bits we use in a PTE for representing a swap entry - * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the - *_PAGE_HASHPTE bit (if used). -- paulus - */ -#define __swp_type(entry) ((entry).val & 0x1f) -#define __swp_offset(entry) ((entry).val >> 5) -#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 5) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 }) - -/* Encode and decode a nonlinear file mapping entry */ -#define PTE_FILE_MAX_BITS 29 -#define pte_to_pgoff(pte) (pte_val(pte) >> 3) -#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE }) - -/* - * No page table caches to initialise - */ -#define pgtable_cache_init() do { } while (0) - -extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, - pmd_t **pmdp); - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_PGTABLE_PPC32_H */ diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h deleted file mode 100644 index 74c6f380b805..000000000000 --- a/include/asm-powerpc/pgtable-ppc64.h +++ /dev/null @@ -1,468 +0,0 @@ -#ifndef _ASM_POWERPC_PGTABLE_PPC64_H_ -#define _ASM_POWERPC_PGTABLE_PPC64_H_ -/* - * This file contains the functions and defines necessary to modify and use - * the ppc64 hashed page table. - */ - -#ifndef __ASSEMBLY__ -#include -#include -#endif /* __ASSEMBLY__ */ - -#ifdef CONFIG_PPC_64K_PAGES -#include -#else -#include -#endif - -#define FIRST_USER_ADDRESS 0 - -/* - * Size of EA range mapped by our pagetables. - */ -#define PGTABLE_EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \ - PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT) -#define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE) - -#if TASK_SIZE_USER64 > PGTABLE_RANGE -#error TASK_SIZE_USER64 exceeds pagetable range -#endif - -#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT)) -#error TASK_SIZE_USER64 exceeds user VSID range -#endif - - -/* - * Define the address range of the vmalloc VM area. - */ -#define VMALLOC_START ASM_CONST(0xD000000000000000) -#define VMALLOC_SIZE (PGTABLE_RANGE >> 1) -#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE) - -/* - * Define the address ranges for MMIO and IO space : - * - * ISA_IO_BASE = VMALLOC_END, 64K reserved area - * PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces - * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE - */ -#define FULL_IO_SIZE 0x80000000ul -#define ISA_IO_BASE (VMALLOC_END) -#define ISA_IO_END (VMALLOC_END + 0x10000ul) -#define PHB_IO_BASE (ISA_IO_END) -#define PHB_IO_END (VMALLOC_END + FULL_IO_SIZE) -#define IOREMAP_BASE (PHB_IO_END) -#define IOREMAP_END (VMALLOC_START + PGTABLE_RANGE) - -/* - * Region IDs - */ -#define REGION_SHIFT 60UL -#define REGION_MASK (0xfUL << REGION_SHIFT) -#define REGION_ID(ea) (((unsigned long)(ea)) >> REGION_SHIFT) - -#define VMALLOC_REGION_ID (REGION_ID(VMALLOC_START)) -#define KERNEL_REGION_ID (REGION_ID(PAGE_OFFSET)) -#define VMEMMAP_REGION_ID (0xfUL) -#define USER_REGION_ID (0UL) - -/* - * Defines the address of the vmemap area, in its own region - */ -#define VMEMMAP_BASE (VMEMMAP_REGION_ID << REGION_SHIFT) -#define vmemmap ((struct page *)VMEMMAP_BASE) - - -/* - * Common bits in a linux-style PTE. These match the bits in the - * (hardware-defined) PowerPC PTE as closely as possible. Additional - * bits may be defined in pgtable-*.h - */ -#define _PAGE_PRESENT 0x0001 /* software: pte contains a translation */ -#define _PAGE_USER 0x0002 /* matches one of the PP bits */ -#define _PAGE_FILE 0x0002 /* (!present only) software: pte holds file offset */ -#define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */ -#define _PAGE_GUARDED 0x0008 -#define _PAGE_COHERENT 0x0010 /* M: enforce memory coherence (SMP systems) */ -#define _PAGE_NO_CACHE 0x0020 /* I: cache inhibit */ -#define _PAGE_WRITETHRU 0x0040 /* W: cache write-through */ -#define _PAGE_DIRTY 0x0080 /* C: page changed */ -#define _PAGE_ACCESSED 0x0100 /* R: page referenced */ -#define _PAGE_RW 0x0200 /* software: user write access allowed */ -#define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */ - -/* Strong Access Ordering */ -#define _PAGE_SAO (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT) - -#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT) - -#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY) - -/* __pgprot defined in asm-powerpc/page.h */ -#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) - -#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER) -#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER | _PAGE_EXEC) -#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) -#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) -#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) -#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) -#define PAGE_KERNEL __pgprot(_PAGE_BASE | _PAGE_WRENABLE) -#define PAGE_KERNEL_CI __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_WRENABLE | _PAGE_NO_CACHE | _PAGE_GUARDED) -#define PAGE_KERNEL_EXEC __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_EXEC) - -#define PAGE_AGP __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE) -#define HAVE_PAGE_AGP - -#define PAGE_PROT_BITS __pgprot(_PAGE_GUARDED | _PAGE_COHERENT | \ - _PAGE_NO_CACHE | _PAGE_WRITETHRU | \ - _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \ - _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC) -/* PTEIDX nibble */ -#define _PTEIDX_SECONDARY 0x8 -#define _PTEIDX_GROUP_IX 0x7 - - -/* - * POWER4 and newer have per page execute protection, older chips can only - * do this on a segment (256MB) basis. - * - * Also, write permissions imply read permissions. - * This is the closest we can get.. - * - * Note due to the way vm flags are laid out, the bits are XWR - */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY -#define __P100 PAGE_READONLY_X -#define __P101 PAGE_READONLY_X -#define __P110 PAGE_COPY_X -#define __P111 PAGE_COPY_X - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED -#define __S100 PAGE_READONLY_X -#define __S101 PAGE_READONLY_X -#define __S110 PAGE_SHARED_X -#define __S111 PAGE_SHARED_X - -#ifdef CONFIG_HUGETLB_PAGE - -#define HAVE_ARCH_UNMAPPED_AREA -#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN - -#endif - -#ifndef __ASSEMBLY__ - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - * - * mk_pte takes a (struct page *) as input - */ -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) - -static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot) -{ - pte_t pte; - - - pte_val(pte) = (pfn << PTE_RPN_SHIFT) | pgprot_val(pgprot); - return pte; -} - -#define pte_modify(_pte, newprot) \ - (__pte((pte_val(_pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))) - -#define pte_none(pte) ((pte_val(pte) & ~_PAGE_HPTEFLAGS) == 0) -#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) - -/* pte_clear moved to later in this file */ - -#define pte_pfn(x) ((unsigned long)((pte_val(x)>>PTE_RPN_SHIFT))) -#define pte_page(x) pfn_to_page(pte_pfn(x)) - -#define PMD_BAD_BITS (PTE_TABLE_SIZE-1) -#define PUD_BAD_BITS (PMD_TABLE_SIZE-1) - -#define pmd_set(pmdp, pmdval) (pmd_val(*(pmdp)) = (pmdval)) -#define pmd_none(pmd) (!pmd_val(pmd)) -#define pmd_bad(pmd) (!is_kernel_addr(pmd_val(pmd)) \ - || (pmd_val(pmd) & PMD_BAD_BITS)) -#define pmd_present(pmd) (pmd_val(pmd) != 0) -#define pmd_clear(pmdp) (pmd_val(*(pmdp)) = 0) -#define pmd_page_vaddr(pmd) (pmd_val(pmd) & ~PMD_MASKED_BITS) -#define pmd_page(pmd) virt_to_page(pmd_page_vaddr(pmd)) - -#define pud_set(pudp, pudval) (pud_val(*(pudp)) = (pudval)) -#define pud_none(pud) (!pud_val(pud)) -#define pud_bad(pud) (!is_kernel_addr(pud_val(pud)) \ - || (pud_val(pud) & PUD_BAD_BITS)) -#define pud_present(pud) (pud_val(pud) != 0) -#define pud_clear(pudp) (pud_val(*(pudp)) = 0) -#define pud_page_vaddr(pud) (pud_val(pud) & ~PUD_MASKED_BITS) -#define pud_page(pud) virt_to_page(pud_page_vaddr(pud)) - -#define pgd_set(pgdp, pudp) ({pgd_val(*(pgdp)) = (unsigned long)(pudp);}) - -/* - * Find an entry in a page-table-directory. We combine the address region - * (the high order N bits) and the pgd portion of the address. - */ -/* to avoid overflow in free_pgtables we don't use PTRS_PER_PGD here */ -#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & 0x1ff) - -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) - -#define pmd_offset(pudp,addr) \ - (((pmd_t *) pud_page_vaddr(*(pudp))) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))) - -#define pte_offset_kernel(dir,addr) \ - (((pte_t *) pmd_page_vaddr(*(dir))) + (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))) - -#define pte_offset_map(dir,addr) pte_offset_kernel((dir), (addr)) -#define pte_offset_map_nested(dir,addr) pte_offset_kernel((dir), (addr)) -#define pte_unmap(pte) do { } while(0) -#define pte_unmap_nested(pte) do { } while(0) - -/* to find an entry in a kernel page-table-directory */ -/* This now only contains the vmalloc pages */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW;} -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY;} -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;} -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;} -static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; } - -static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; } -static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; } - -static inline pte_t pte_wrprotect(pte_t pte) { - pte_val(pte) &= ~(_PAGE_RW); return pte; } -static inline pte_t pte_mkclean(pte_t pte) { - pte_val(pte) &= ~(_PAGE_DIRTY); return pte; } -static inline pte_t pte_mkold(pte_t pte) { - pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkwrite(pte_t pte) { - pte_val(pte) |= _PAGE_RW; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { - pte_val(pte) |= _PAGE_DIRTY; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { - pte_val(pte) |= _PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkhuge(pte_t pte) { - return pte; } -static inline pte_t pte_mkspecial(pte_t pte) { - pte_val(pte) |= _PAGE_SPECIAL; return pte; } -static inline unsigned long pte_pgprot(pte_t pte) -{ - return __pgprot(pte_val(pte)) & PAGE_PROT_BITS; -} - -/* Atomic PTE updates */ -static inline unsigned long pte_update(struct mm_struct *mm, - unsigned long addr, - pte_t *ptep, unsigned long clr, - int huge) -{ - unsigned long old, tmp; - - __asm__ __volatile__( - "1: ldarx %0,0,%3 # pte_update\n\ - andi. %1,%0,%6\n\ - bne- 1b \n\ - andc %1,%0,%4 \n\ - stdcx. %1,0,%3 \n\ - bne- 1b" - : "=&r" (old), "=&r" (tmp), "=m" (*ptep) - : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY) - : "cc" ); - - if (old & _PAGE_HASHPTE) - hpte_need_flush(mm, addr, ptep, old, huge); - return old; -} - -static inline int __ptep_test_and_clear_young(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - unsigned long old; - - if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0) - return 0; - old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0); - return (old & _PAGE_ACCESSED) != 0; -} -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -#define ptep_test_and_clear_young(__vma, __addr, __ptep) \ -({ \ - int __r; \ - __r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \ - __r; \ -}) - -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, - pte_t *ptep) -{ - unsigned long old; - - if ((pte_val(*ptep) & _PAGE_RW) == 0) - return; - old = pte_update(mm, addr, ptep, _PAGE_RW, 0); -} - -static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - unsigned long old; - - if ((pte_val(*ptep) & _PAGE_RW) == 0) - return; - old = pte_update(mm, addr, ptep, _PAGE_RW, 1); -} - -/* - * We currently remove entries from the hashtable regardless of whether - * the entry was young or dirty. The generic routines only flush if the - * entry was young or dirty which is not good enough. - * - * We should be more intelligent about this but for the moment we override - * these functions and force a tlb flush unconditionally - */ -#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH -#define ptep_clear_flush_young(__vma, __address, __ptep) \ -({ \ - int __young = __ptep_test_and_clear_young((__vma)->vm_mm, __address, \ - __ptep); \ - __young; \ -}) - -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -static inline pte_t ptep_get_and_clear(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0); - return __pte(old); -} - -static inline void pte_clear(struct mm_struct *mm, unsigned long addr, - pte_t * ptep) -{ - pte_update(mm, addr, ptep, ~0UL, 0); -} - -/* - * set_pte stores a linux PTE into the linux page table. - */ -static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) -{ - if (pte_present(*ptep)) - pte_clear(mm, addr, ptep); - pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); - *ptep = pte; -} - -/* Set the dirty and/or accessed bits atomically in a linux PTE, this - * function doesn't need to flush the hash entry - */ -#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS -static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) -{ - unsigned long bits = pte_val(entry) & - (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC); - unsigned long old, tmp; - - __asm__ __volatile__( - "1: ldarx %0,0,%4\n\ - andi. %1,%0,%6\n\ - bne- 1b \n\ - or %0,%3,%0\n\ - stdcx. %0,0,%4\n\ - bne- 1b" - :"=&r" (old), "=&r" (tmp), "=m" (*ptep) - :"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY) - :"cc"); -} -#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ -({ \ - int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ - __ptep_set_access_flags(__ptep, __entry, __dirty); \ - flush_tlb_page_nohash(__vma, __address); \ - } \ - __changed; \ -}) - -/* - * Macro to mark a page protection value as "uncacheable". - */ -#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED)) - -struct file; -extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, - unsigned long size, pgprot_t vma_prot); -#define __HAVE_PHYS_MEM_ACCESS_PROT - -#define __HAVE_ARCH_PTE_SAME -#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0) - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - -/* Encode and de-code a swap entry */ -#define __swp_type(entry) (((entry).val >> 1) & 0x3f) -#define __swp_offset(entry) ((entry).val >> 8) -#define __swp_entry(type, offset) ((swp_entry_t){((type)<< 1)|((offset)<<8)}) -#define __pte_to_swp_entry(pte) ((swp_entry_t){pte_val(pte) >> PTE_RPN_SHIFT}) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val << PTE_RPN_SHIFT }) -#define pte_to_pgoff(pte) (pte_val(pte) >> PTE_RPN_SHIFT) -#define pgoff_to_pte(off) ((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE}) -#define PTE_FILE_MAX_BITS (BITS_PER_LONG - PTE_RPN_SHIFT) - -void pgtable_cache_init(void); - -/* - * find_linux_pte returns the address of a linux pte for a given - * effective address and directory. If not found, it returns zero. - */static inline pte_t *find_linux_pte(pgd_t *pgdir, unsigned long ea) -{ - pgd_t *pg; - pud_t *pu; - pmd_t *pm; - pte_t *pt = NULL; - - pg = pgdir + pgd_index(ea); - if (!pgd_none(*pg)) { - pu = pud_offset(pg, ea); - if (!pud_none(*pu)) { - pm = pmd_offset(pu, ea); - if (pmd_present(*pm)) - pt = pte_offset_kernel(pm, ea); - } - } - return pt; -} - -pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address); - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */ diff --git a/include/asm-powerpc/pgtable.h b/include/asm-powerpc/pgtable.h deleted file mode 100644 index dbb8ca172e44..000000000000 --- a/include/asm-powerpc/pgtable.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _ASM_POWERPC_PGTABLE_H -#define _ASM_POWERPC_PGTABLE_H -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ -#include /* For TASK_SIZE */ -#include -#include -struct mm_struct; -#endif /* !__ASSEMBLY__ */ - -#if defined(CONFIG_PPC64) -# include -#else -# include -#endif - -#ifndef __ASSEMBLY__ -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern unsigned long empty_zero_page[]; -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) - -extern pgd_t swapper_pg_dir[]; - -extern void paging_init(void); - -/* - * kern_addr_valid is intended to indicate whether an address is a valid - * kernel address. Most 32-bit archs define it as always true (like this) - * but most 64-bit archs actually perform a test. What should we do here? - */ -#define kern_addr_valid(addr) (1) - -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) - -#include - - -/* - * This gets called at the end of handling a page fault, when - * the kernel has put a new PTE into the page table for the process. - * We use it to ensure coherency between the i-cache and d-cache - * for the page which has just been mapped in. - * On machines which use an MMU hash table, we use this to put a - * corresponding HPTE into the hash table ahead of time, instead of - * waiting for the inevitable extra hash-table miss exception. - */ -extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t); - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_PGTABLE_H */ diff --git a/include/asm-powerpc/phyp_dump.h b/include/asm-powerpc/phyp_dump.h deleted file mode 100644 index fa74c6c3e106..000000000000 --- a/include/asm-powerpc/phyp_dump.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Hypervisor-assisted dump - * - * Linas Vepstas, Manish Ahuja 2008 - * Copyright 2008 IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _PPC64_PHYP_DUMP_H -#define _PPC64_PHYP_DUMP_H - -#ifdef CONFIG_PHYP_DUMP - -/* The RMR region will be saved for later dumping - * whenever the kernel crashes. Set this to 256MB. */ -#define PHYP_DUMP_RMR_START 0x0 -#define PHYP_DUMP_RMR_END (1UL<<28) - -struct phyp_dump { - /* Memory that is reserved during very early boot. */ - unsigned long init_reserve_start; - unsigned long init_reserve_size; - /* cmd line options during boot */ - unsigned long reserve_bootvar; - unsigned long phyp_dump_at_boot; - /* Check status during boot if dump supported, active & present*/ - unsigned long phyp_dump_configured; - unsigned long phyp_dump_is_active; - /* store cpu & hpte size */ - unsigned long cpu_state_size; - unsigned long hpte_region_size; - /* previous scratch area values */ - unsigned long reserved_scratch_addr; - unsigned long reserved_scratch_size; -}; - -extern struct phyp_dump *phyp_dump_info; - -int early_init_dt_scan_phyp_dump(unsigned long node, - const char *uname, int depth, void *data); - -#endif /* CONFIG_PHYP_DUMP */ -#endif /* _PPC64_PHYP_DUMP_H */ diff --git a/include/asm-powerpc/pmac_feature.h b/include/asm-powerpc/pmac_feature.h deleted file mode 100644 index 877c35a4356e..000000000000 --- a/include/asm-powerpc/pmac_feature.h +++ /dev/null @@ -1,405 +0,0 @@ -/* - * Definition of platform feature hooks for PowerMacs - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998 Paul Mackerras & - * Ben. Herrenschmidt. - * - * - * Note: I removed media-bay details from the feature stuff, I believe it's - * not worth it, the media-bay driver can directly use the mac-io - * ASIC registers. - * - * Implementation note: Currently, none of these functions will block. - * However, they may internally protect themselves with a spinlock - * for way too long. Be prepared for at least some of these to block - * in the future. - * - * Unless specifically defined, the result code is assumed to be an - * error when negative, 0 is the default success result. Some functions - * may return additional positive result values. - * - * To keep implementation simple, all feature calls are assumed to have - * the prototype parameters (struct device_node* node, int value). - * When either is not used, pass 0. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_POWERPC_PMAC_FEATURE_H -#define __ASM_POWERPC_PMAC_FEATURE_H - -#include -#include - -/* - * Known Mac motherboard models - * - * Please, report any error here to benh@kernel.crashing.org, thanks ! - * - * Note that I don't fully maintain this list for Core99 & MacRISC2 - * and I'm considering removing all NewWorld entries from it and - * entirely rely on the model string. - */ - -/* PowerSurge are the first generation of PCI Pmacs. This include - * all of the Grand-Central based machines. We currently don't - * differenciate most of them. - */ -#define PMAC_TYPE_PSURGE 0x10 /* PowerSurge */ -#define PMAC_TYPE_ANS 0x11 /* Apple Network Server */ - -/* Here is the infamous serie of OHare based machines - */ -#define PMAC_TYPE_COMET 0x20 /* Beleived to be PowerBook 2400 */ -#define PMAC_TYPE_HOOPER 0x21 /* Beleived to be PowerBook 3400 */ -#define PMAC_TYPE_KANGA 0x22 /* PowerBook 3500 (first G3) */ -#define PMAC_TYPE_ALCHEMY 0x23 /* Alchemy motherboard base */ -#define PMAC_TYPE_GAZELLE 0x24 /* Spartacus, some 5xxx/6xxx */ -#define PMAC_TYPE_UNKNOWN_OHARE 0x2f /* Unknown, but OHare based */ - -/* Here are the Heathrow based machines - * FIXME: Differenciate wallstreet,mainstreet,wallstreetII - */ -#define PMAC_TYPE_GOSSAMER 0x30 /* Gossamer motherboard */ -#define PMAC_TYPE_SILK 0x31 /* Desktop PowerMac G3 */ -#define PMAC_TYPE_WALLSTREET 0x32 /* Wallstreet/Mainstreet PowerBook*/ -#define PMAC_TYPE_UNKNOWN_HEATHROW 0x3f /* Unknown but heathrow based */ - -/* Here are newworld machines based on Paddington (heathrow derivative) - */ -#define PMAC_TYPE_101_PBOOK 0x40 /* 101 PowerBook (aka Lombard) */ -#define PMAC_TYPE_ORIG_IMAC 0x41 /* First generation iMac */ -#define PMAC_TYPE_YOSEMITE 0x42 /* B&W G3 */ -#define PMAC_TYPE_YIKES 0x43 /* Yikes G4 (PCI graphics) */ -#define PMAC_TYPE_UNKNOWN_PADDINGTON 0x4f /* Unknown but paddington based */ - -/* Core99 machines based on UniNorth 1.0 and 1.5 - * - * Note: A single entry here may cover several actual models according - * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most - * FireWire based iMacs, etc...). Those machines are too similar to be - * distinguished here, when they need to be differencied, use the - * device-tree "model" or "compatible" property. - */ -#define PMAC_TYPE_ORIG_IBOOK 0x40 /* First iBook model (no firewire) */ -#define PMAC_TYPE_SAWTOOTH 0x41 /* Desktop G4s */ -#define PMAC_TYPE_FW_IMAC 0x42 /* FireWire iMacs (except Pangea based) */ -#define PMAC_TYPE_FW_IBOOK 0x43 /* FireWire iBooks (except iBook2) */ -#define PMAC_TYPE_CUBE 0x44 /* Cube PowerMac */ -#define PMAC_TYPE_QUICKSILVER 0x45 /* QuickSilver G4s */ -#define PMAC_TYPE_PISMO 0x46 /* Pismo PowerBook */ -#define PMAC_TYPE_TITANIUM 0x47 /* Titanium PowerBook */ -#define PMAC_TYPE_TITANIUM2 0x48 /* Titanium II PowerBook (no L3, M6) */ -#define PMAC_TYPE_TITANIUM3 0x49 /* Titanium III PowerBook (with L3 & M7) */ -#define PMAC_TYPE_TITANIUM4 0x50 /* Titanium IV PowerBook (with L3 & M9) */ -#define PMAC_TYPE_EMAC 0x50 /* eMac */ -#define PMAC_TYPE_UNKNOWN_CORE99 0x5f - -/* MacRisc2 with UniNorth 2.0 */ -#define PMAC_TYPE_RACKMAC 0x80 /* XServe */ -#define PMAC_TYPE_WINDTUNNEL 0x81 - -/* MacRISC2 machines based on the Pangea chipset - */ -#define PMAC_TYPE_PANGEA_IMAC 0x100 /* Flower Power iMac */ -#define PMAC_TYPE_IBOOK2 0x101 /* iBook2 (polycarbonate) */ -#define PMAC_TYPE_FLAT_PANEL_IMAC 0x102 /* Flat panel iMac */ -#define PMAC_TYPE_UNKNOWN_PANGEA 0x10f - -/* MacRISC2 machines based on the Intrepid chipset - */ -#define PMAC_TYPE_UNKNOWN_INTREPID 0x11f /* Generic */ - -/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore, - * but rather machine families - */ -#define PMAC_TYPE_POWERMAC_G5 0x150 /* U3 & U3H based */ -#define PMAC_TYPE_POWERMAC_G5_U3L 0x151 /* U3L based desktop */ -#define PMAC_TYPE_IMAC_G5 0x152 /* iMac G5 */ -#define PMAC_TYPE_XSERVE_G5 0x153 /* Xserve G5 */ -#define PMAC_TYPE_UNKNOWN_K2 0x19f /* Any other K2 based */ -#define PMAC_TYPE_UNKNOWN_SHASTA 0x19e /* Any other Shasta based */ - -/* - * Motherboard flags - */ - -#define PMAC_MB_CAN_SLEEP 0x00000001 -#define PMAC_MB_HAS_FW_POWER 0x00000002 -#define PMAC_MB_OLD_CORE99 0x00000004 -#define PMAC_MB_MOBILE 0x00000008 -#define PMAC_MB_MAY_SLEEP 0x00000010 - -/* - * Feature calls supported on pmac - * - */ - -/* - * Use this inline wrapper - */ -struct device_node; - -static inline long pmac_call_feature(int selector, struct device_node* node, - long param, long value) -{ - if (!ppc_md.feature_call || !machine_is(powermac)) - return -ENODEV; - return ppc_md.feature_call(selector, node, param, value); -} - -/* PMAC_FTR_SERIAL_ENABLE (struct device_node* node, int param, int value) - * enable/disable an SCC side. Pass the node corresponding to the - * channel side as a parameter. - * param is the type of port - * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled - * for use by xmon. - */ -#define PMAC_FTR_SCC_ENABLE PMAC_FTR_DEF(0) - #define PMAC_SCC_ASYNC 0 - #define PMAC_SCC_IRDA 1 - #define PMAC_SCC_I2S1 2 - #define PMAC_SCC_FLAG_XMON 0x00001000 - -/* PMAC_FTR_MODEM_ENABLE (struct device_node* node, 0, int value) - * enable/disable the internal modem. - */ -#define PMAC_FTR_MODEM_ENABLE PMAC_FTR_DEF(1) - -/* PMAC_FTR_SWIM3_ENABLE (struct device_node* node, 0,int value) - * enable/disable the swim3 (floppy) cell of a mac-io ASIC - */ -#define PMAC_FTR_SWIM3_ENABLE PMAC_FTR_DEF(2) - -/* PMAC_FTR_MESH_ENABLE (struct device_node* node, 0, int value) - * enable/disable the mesh (scsi) cell of a mac-io ASIC - */ -#define PMAC_FTR_MESH_ENABLE PMAC_FTR_DEF(3) - -/* PMAC_FTR_IDE_ENABLE (struct device_node* node, int busID, int value) - * enable/disable an IDE port of a mac-io ASIC - * pass the busID parameter - */ -#define PMAC_FTR_IDE_ENABLE PMAC_FTR_DEF(4) - -/* PMAC_FTR_IDE_RESET (struct device_node* node, int busID, int value) - * assert(1)/release(0) an IDE reset line (mac-io IDE only) - */ -#define PMAC_FTR_IDE_RESET PMAC_FTR_DEF(5) - -/* PMAC_FTR_BMAC_ENABLE (struct device_node* node, 0, int value) - * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive - * it's reset line - */ -#define PMAC_FTR_BMAC_ENABLE PMAC_FTR_DEF(6) - -/* PMAC_FTR_GMAC_ENABLE (struct device_node* node, 0, int value) - * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This - * control the cell's clock. - */ -#define PMAC_FTR_GMAC_ENABLE PMAC_FTR_DEF(7) - -/* PMAC_FTR_GMAC_PHY_RESET (struct device_node* node, 0, 0) - * Perform a HW reset of the PHY connected to a gmac controller. - * Pass the gmac device node, not the PHY node. - */ -#define PMAC_FTR_GMAC_PHY_RESET PMAC_FTR_DEF(8) - -/* PMAC_FTR_SOUND_CHIP_ENABLE (struct device_node* node, 0, int value) - * enable/disable the sound chip, whatever it is and provided it can - * acually be controlled - */ -#define PMAC_FTR_SOUND_CHIP_ENABLE PMAC_FTR_DEF(9) - -/* -- add various tweaks related to sound routing -- */ - -/* PMAC_FTR_AIRPORT_ENABLE (struct device_node* node, 0, int value) - * enable/disable the airport card - */ -#define PMAC_FTR_AIRPORT_ENABLE PMAC_FTR_DEF(10) - -/* PMAC_FTR_RESET_CPU (NULL, int cpu_nr, 0) - * toggle the reset line of a CPU on an uninorth-based SMP machine - */ -#define PMAC_FTR_RESET_CPU PMAC_FTR_DEF(11) - -/* PMAC_FTR_USB_ENABLE (struct device_node* node, 0, int value) - * enable/disable an USB cell, along with the power of the USB "pad" - * on keylargo based machines - */ -#define PMAC_FTR_USB_ENABLE PMAC_FTR_DEF(12) - -/* PMAC_FTR_1394_ENABLE (struct device_node* node, 0, int value) - * enable/disable the firewire cell of an uninorth ASIC. - */ -#define PMAC_FTR_1394_ENABLE PMAC_FTR_DEF(13) - -/* PMAC_FTR_1394_CABLE_POWER (struct device_node* node, 0, int value) - * enable/disable the firewire cable power supply of the uninorth - * firewire cell - */ -#define PMAC_FTR_1394_CABLE_POWER PMAC_FTR_DEF(14) - -/* PMAC_FTR_SLEEP_STATE (struct device_node* node, 0, int value) - * set the sleep state of the motherboard. - * - * Pass -1 as value to query for sleep capability - * Pass 1 to set IOs to sleep - * Pass 0 to set IOs to wake - */ -#define PMAC_FTR_SLEEP_STATE PMAC_FTR_DEF(15) - -/* PMAC_FTR_GET_MB_INFO (NULL, selector, 0) - * - * returns some motherboard infos. - * selector: 0 - model id - * 1 - model flags (capabilities) - * 2 - model name (cast to const char *) - */ -#define PMAC_FTR_GET_MB_INFO PMAC_FTR_DEF(16) -#define PMAC_MB_INFO_MODEL 0 -#define PMAC_MB_INFO_FLAGS 1 -#define PMAC_MB_INFO_NAME 2 - -/* PMAC_FTR_READ_GPIO (NULL, int index, 0) - * - * read a GPIO from a mac-io controller of type KeyLargo or Pangea. - * the value returned is a byte (positive), or a negative error code - */ -#define PMAC_FTR_READ_GPIO PMAC_FTR_DEF(17) - -/* PMAC_FTR_WRITE_GPIO (NULL, int index, int value) - * - * write a GPIO of a mac-io controller of type KeyLargo or Pangea. - */ -#define PMAC_FTR_WRITE_GPIO PMAC_FTR_DEF(18) - -/* PMAC_FTR_ENABLE_MPIC - * - * Enable the MPIC cell - */ -#define PMAC_FTR_ENABLE_MPIC PMAC_FTR_DEF(19) - -/* PMAC_FTR_AACK_DELAY_ENABLE (NULL, int enable, 0) - * - * Enable/disable the AACK delay on the northbridge for systems using DFS - */ -#define PMAC_FTR_AACK_DELAY_ENABLE PMAC_FTR_DEF(20) - -/* PMAC_FTR_DEVICE_CAN_WAKE - * - * Used by video drivers to inform system that they can actually perform - * wakeup from sleep - */ -#define PMAC_FTR_DEVICE_CAN_WAKE PMAC_FTR_DEF(22) - - -/* Don't use those directly, they are for the sake of pmac_setup.c */ -extern long pmac_do_feature_call(unsigned int selector, ...); -extern void pmac_feature_init(void); - -/* Video suspend tweak */ -extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data); -extern void pmac_call_early_video_resume(void); - -#define PMAC_FTR_DEF(x) ((0x6660000) | (x)) - -/* The AGP driver registers itself here */ -extern void pmac_register_agp_pm(struct pci_dev *bridge, - int (*suspend)(struct pci_dev *bridge), - int (*resume)(struct pci_dev *bridge)); - -/* Those are meant to be used by video drivers to deal with AGP - * suspend resume properly - */ -extern void pmac_suspend_agp_for_card(struct pci_dev *dev); -extern void pmac_resume_agp_for_card(struct pci_dev *dev); - -/* - * The part below is for use by macio_asic.c only, do not rely - * on the data structures or constants below in a normal driver - * - */ - -#define MAX_MACIO_CHIPS 2 - -enum { - macio_unknown = 0, - macio_grand_central, - macio_ohare, - macio_ohareII, - macio_heathrow, - macio_gatwick, - macio_paddington, - macio_keylargo, - macio_pangea, - macio_intrepid, - macio_keylargo2, - macio_shasta, -}; - -struct macio_chip -{ - struct device_node *of_node; - int type; - const char *name; - int rev; - volatile u32 __iomem *base; - unsigned long flags; - - /* For use by macio_asic PCI driver */ - struct macio_bus lbus; -}; - -extern struct macio_chip macio_chips[MAX_MACIO_CHIPS]; - -#define MACIO_FLAG_SCCA_ON 0x00000001 -#define MACIO_FLAG_SCCB_ON 0x00000002 -#define MACIO_FLAG_SCC_LOCKED 0x00000004 -#define MACIO_FLAG_AIRPORT_ON 0x00000010 -#define MACIO_FLAG_FW_SUPPORTED 0x00000020 - -extern struct macio_chip* macio_find(struct device_node* child, int type); - -#define MACIO_FCR32(macio, r) ((macio)->base + ((r) >> 2)) -#define MACIO_FCR8(macio, r) (((volatile u8 __iomem *)((macio)->base)) + (r)) - -#define MACIO_IN32(r) (in_le32(MACIO_FCR32(macio,r))) -#define MACIO_OUT32(r,v) (out_le32(MACIO_FCR32(macio,r), (v))) -#define MACIO_BIS(r,v) (MACIO_OUT32((r), MACIO_IN32(r) | (v))) -#define MACIO_BIC(r,v) (MACIO_OUT32((r), MACIO_IN32(r) & ~(v))) -#define MACIO_IN8(r) (in_8(MACIO_FCR8(macio,r))) -#define MACIO_OUT8(r,v) (out_8(MACIO_FCR8(macio,r), (v))) - -/* - * Those are exported by pmac feature for internal use by arch code - * only like the platform function callbacks, do not use directly in drivers - */ -extern spinlock_t feature_lock; -extern struct device_node *uninorth_node; -extern u32 __iomem *uninorth_base; - -/* - * Uninorth reg. access. Note that Uni-N regs are big endian - */ - -#define UN_REG(r) (uninorth_base + ((r) >> 2)) -#define UN_IN(r) (in_be32(UN_REG(r))) -#define UN_OUT(r,v) (out_be32(UN_REG(r), (v))) -#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v))) -#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v))) - -/* Uninorth variant: - * - * 0 = not uninorth - * 1 = U1.x or U2.x - * 3 = U3 - * 4 = U4 - */ -extern int pmac_get_uninorth_variant(void); - -#endif /* __ASM_POWERPC_PMAC_FEATURE_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/pmac_low_i2c.h b/include/asm-powerpc/pmac_low_i2c.h deleted file mode 100644 index 131011bd7e76..000000000000 --- a/include/asm-powerpc/pmac_low_i2c.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * include/asm-ppc/pmac_low_i2c.h - * - * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#ifndef __PMAC_LOW_I2C_H__ -#define __PMAC_LOW_I2C_H__ -#ifdef __KERNEL__ - -/* i2c mode (based on the platform functions format) */ -enum { - pmac_i2c_mode_dumb = 1, - pmac_i2c_mode_std = 2, - pmac_i2c_mode_stdsub = 3, - pmac_i2c_mode_combined = 4, -}; - -/* RW bit in address */ -enum { - pmac_i2c_read = 0x01, - pmac_i2c_write = 0x00 -}; - -/* i2c bus type */ -enum { - pmac_i2c_bus_keywest = 0, - pmac_i2c_bus_pmu = 1, - pmac_i2c_bus_smu = 2, -}; - -/* i2c bus features */ -enum { - /* can_largesub : supports >1 byte subaddresses (SMU only) */ - pmac_i2c_can_largesub = 0x00000001u, - - /* multibus : device node holds multiple busses, bus number is - * encoded in bits 0xff00 of "reg" of a given device - */ - pmac_i2c_multibus = 0x00000002u, -}; - -/* i2c busses in the system */ -struct pmac_i2c_bus; -struct i2c_adapter; - -/* Init, called early during boot */ -extern int pmac_i2c_init(void); - -/* Lookup an i2c bus for a device-node. The node can be either the bus - * node itself or a device below it. In the case of a multibus, the bus - * node itself is the controller node, else, it's a child of the controller - * node - */ -extern struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node); - -/* Get the address for an i2c device. This strips the bus number if - * necessary. The 7 bits address is returned 1 bit right shifted so that the - * direction can be directly ored in - */ -extern u8 pmac_i2c_get_dev_addr(struct device_node *device); - -/* Get infos about a bus */ -extern struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus); -extern struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus); -extern int pmac_i2c_get_type(struct pmac_i2c_bus *bus); -extern int pmac_i2c_get_flags(struct pmac_i2c_bus *bus); -extern int pmac_i2c_get_channel(struct pmac_i2c_bus *bus); - -/* i2c layer adapter attach/detach */ -extern void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus, - struct i2c_adapter *adapter); -extern void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus, - struct i2c_adapter *adapter); -extern struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus); -extern struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter); - -/* March a device or bus with an i2c adapter structure, to be used by drivers - * to match device-tree nodes with i2c adapters during adapter discovery - * callbacks - */ -extern int pmac_i2c_match_adapter(struct device_node *dev, - struct i2c_adapter *adapter); - - -/* (legacy) Locking functions exposed to i2c-keywest */ -extern int pmac_low_i2c_lock(struct device_node *np); -extern int pmac_low_i2c_unlock(struct device_node *np); - -/* Access functions for platform code */ -extern int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled); -extern void pmac_i2c_close(struct pmac_i2c_bus *bus); -extern int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode); -extern int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, - u32 subaddr, u8 *data, int len); - -/* Suspend/resume code called by via-pmu directly for now */ -extern void pmac_pfunc_i2c_suspend(void); -extern void pmac_pfunc_i2c_resume(void); - -#endif /* __KERNEL__ */ -#endif /* __PMAC_LOW_I2C_H__ */ diff --git a/include/asm-powerpc/pmac_pfunc.h b/include/asm-powerpc/pmac_pfunc.h deleted file mode 100644 index 1330d6a58c57..000000000000 --- a/include/asm-powerpc/pmac_pfunc.h +++ /dev/null @@ -1,252 +0,0 @@ -#ifndef __PMAC_PFUNC_H__ -#define __PMAC_PFUNC_H__ - -#include -#include - -/* Flags in command lists */ -#define PMF_FLAGS_ON_INIT 0x80000000u -#define PMF_FLGAS_ON_TERM 0x40000000u -#define PMF_FLAGS_ON_SLEEP 0x20000000u -#define PMF_FLAGS_ON_WAKE 0x10000000u -#define PMF_FLAGS_ON_DEMAND 0x08000000u -#define PMF_FLAGS_INT_GEN 0x04000000u -#define PMF_FLAGS_HIGH_SPEED 0x02000000u -#define PMF_FLAGS_LOW_SPEED 0x01000000u -#define PMF_FLAGS_SIDE_EFFECTS 0x00800000u - -/* - * Arguments to a platform function call. - * - * NOTE: By convention, pointer arguments point to an u32 - */ -struct pmf_args { - union { - u32 v; - u32 *p; - } u[4]; - unsigned int count; -}; - -/* - * A driver capable of interpreting commands provides a handlers - * structure filled with whatever handlers are implemented by this - * driver. Non implemented handlers are left NULL. - * - * PMF_STD_ARGS are the same arguments that are passed to the parser - * and that gets passed back to the various handlers. - * - * Interpreting a given function always start with a begin() call which - * returns an instance data to be passed around subsequent calls, and - * ends with an end() call. This allows the low level driver to implement - * locking policy or per-function instance data. - * - * For interrupt capable functions, irq_enable() is called when a client - * registers, and irq_disable() is called when the last client unregisters - * Note that irq_enable & irq_disable are called within a semaphore held - * by the core, thus you should not try to register yourself to some other - * pmf interrupt during those calls. - */ - -#define PMF_STD_ARGS struct pmf_function *func, void *instdata, \ - struct pmf_args *args - -struct pmf_function; - -struct pmf_handlers { - void * (*begin)(struct pmf_function *func, struct pmf_args *args); - void (*end)(struct pmf_function *func, void *instdata); - - int (*irq_enable)(struct pmf_function *func); - int (*irq_disable)(struct pmf_function *func); - - int (*write_gpio)(PMF_STD_ARGS, u8 value, u8 mask); - int (*read_gpio)(PMF_STD_ARGS, u8 mask, int rshift, u8 xor); - - int (*write_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask); - int (*read_reg32)(PMF_STD_ARGS, u32 offset); - int (*write_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask); - int (*read_reg16)(PMF_STD_ARGS, u32 offset); - int (*write_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask); - int (*read_reg8)(PMF_STD_ARGS, u32 offset); - - int (*delay)(PMF_STD_ARGS, u32 duration); - - int (*wait_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask); - int (*wait_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask); - int (*wait_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask); - - int (*read_i2c)(PMF_STD_ARGS, u32 len); - int (*write_i2c)(PMF_STD_ARGS, u32 len, const u8 *data); - int (*rmw_i2c)(PMF_STD_ARGS, u32 masklen, u32 valuelen, u32 totallen, - const u8 *maskdata, const u8 *valuedata); - - int (*read_cfg)(PMF_STD_ARGS, u32 offset, u32 len); - int (*write_cfg)(PMF_STD_ARGS, u32 offset, u32 len, const u8 *data); - int (*rmw_cfg)(PMF_STD_ARGS, u32 offset, u32 masklen, u32 valuelen, - u32 totallen, const u8 *maskdata, const u8 *valuedata); - - int (*read_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len); - int (*write_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len, const u8 *data); - int (*set_i2c_mode)(PMF_STD_ARGS, int mode); - int (*rmw_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 masklen, u32 valuelen, - u32 totallen, const u8 *maskdata, - const u8 *valuedata); - - int (*read_reg32_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, - u32 xor); - int (*read_reg16_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, - u32 xor); - int (*read_reg8_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, - u32 xor); - - int (*write_reg32_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); - int (*write_reg16_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); - int (*write_reg8_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); - - int (*mask_and_compare)(PMF_STD_ARGS, u32 len, const u8 *maskdata, - const u8 *valuedata); - - struct module *owner; -}; - - -/* - * Drivers who expose platform functions register at init time, this - * causes the platform functions for that device node to be parsed in - * advance and associated with the device. The data structures are - * partially public so a driver can walk the list of platform functions - * and eventually inspect the flags - */ -struct pmf_device; - -struct pmf_function { - /* All functions for a given driver are linked */ - struct list_head link; - - /* Function node & driver data */ - struct device_node *node; - void *driver_data; - - /* For internal use by core */ - struct pmf_device *dev; - - /* The name is the "xxx" in "platform-do-xxx", this is how - * platform functions are identified by this code. Some functions - * only operate for a given target, in which case the phandle is - * here (or 0 if the filter doesn't apply) - */ - const char *name; - u32 phandle; - - /* The flags for that function. You can have several functions - * with the same name and different flag - */ - u32 flags; - - /* The actual tokenized function blob */ - const void *data; - unsigned int length; - - /* Interrupt clients */ - struct list_head irq_clients; - - /* Refcounting */ - struct kref ref; -}; - -/* - * For platform functions that are interrupts, one can register - * irq_client structures. You canNOT use the same structure twice - * as it contains a link member. Also, the callback is called with - * a spinlock held, you must not call back into any of the pmf_* functions - * from within that callback - */ -struct pmf_irq_client { - void (*handler)(void *data); - void *data; - struct module *owner; - struct list_head link; - struct pmf_function *func; -}; - - -/* - * Register/Unregister a function-capable driver and its handlers - */ -extern int pmf_register_driver(struct device_node *np, - struct pmf_handlers *handlers, - void *driverdata); - -extern void pmf_unregister_driver(struct device_node *np); - - -/* - * Register/Unregister interrupt clients - */ -extern int pmf_register_irq_client(struct device_node *np, - const char *name, - struct pmf_irq_client *client); - -extern void pmf_unregister_irq_client(struct pmf_irq_client *client); - -/* - * Called by the handlers when an irq happens - */ -extern void pmf_do_irq(struct pmf_function *func); - - -/* - * Low level call to platform functions. - * - * The phandle can filter on the target object for functions that have - * multiple targets, the flags allow you to restrict the call to a given - * combination of flags. - * - * The args array contains as many arguments as is required by the function, - * this is dependent on the function you are calling, unfortunately Apple - * mechanism provides no way to encode that so you have to get it right at - * the call site. Some functions require no args, in which case, you can - * pass NULL. - * - * You can also pass NULL to the name. This will match any function that has - * the appropriate combination of flags & phandle or you can pass 0 to the - * phandle to match any - */ -extern int pmf_do_functions(struct device_node *np, const char *name, - u32 phandle, u32 flags, struct pmf_args *args); - - - -/* - * High level call to a platform function. - * - * This one looks for the platform-xxx first so you should call it to the - * actual target if any. It will fallback to platform-do-xxx if it can't - * find one. It will also exclusively target functions that have - * the "OnDemand" flag. - */ - -extern int pmf_call_function(struct device_node *target, const char *name, - struct pmf_args *args); - - -/* - * For low latency interrupt usage, you can lookup for on-demand functions - * using the functions below - */ - -extern struct pmf_function *pmf_find_function(struct device_node *target, - const char *name); - -extern struct pmf_function * pmf_get_function(struct pmf_function *func); -extern void pmf_put_function(struct pmf_function *func); - -extern int pmf_call_one(struct pmf_function *func, struct pmf_args *args); - - -/* Suspend/resume code called by via-pmu directly for now */ -extern void pmac_pfunc_base_suspend(void); -extern void pmac_pfunc_base_resume(void); - -#endif /* __PMAC_PFUNC_H__ */ diff --git a/include/asm-powerpc/pmc.h b/include/asm-powerpc/pmc.h deleted file mode 100644 index d6a616a1b3ea..000000000000 --- a/include/asm-powerpc/pmc.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * pmc.h - * Copyright (C) 2004 David Gibson, IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _POWERPC_PMC_H -#define _POWERPC_PMC_H -#ifdef __KERNEL__ - -#include - -typedef void (*perf_irq_t)(struct pt_regs *); -extern perf_irq_t perf_irq; - -int reserve_pmc_hardware(perf_irq_t new_perf_irq); -void release_pmc_hardware(void); - -#ifdef CONFIG_PPC64 -void power4_enable_pmcs(void); -void pasemi_enable_pmcs(void); -#endif - -#endif /* __KERNEL__ */ -#endif /* _POWERPC_PMC_H */ diff --git a/include/asm-powerpc/pmi.h b/include/asm-powerpc/pmi.h deleted file mode 100644 index b4e91fbf5081..000000000000 --- a/include/asm-powerpc/pmi.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef _POWERPC_PMI_H -#define _POWERPC_PMI_H - -/* - * Definitions for talking with PMI device on PowerPC - * - * PMI (Platform Management Interrupt) is a way to communicate - * with the BMC (Baseboard Management Controller) via interrupts. - * Unlike IPMI it is bidirectional and has a low latency. - * - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 - * - * Author: Christian Krafft - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifdef __KERNEL__ - -#define PMI_TYPE_FREQ_CHANGE 0x01 -#define PMI_TYPE_POWER_BUTTON 0x02 -#define PMI_READ_TYPE 0 -#define PMI_READ_DATA0 1 -#define PMI_READ_DATA1 2 -#define PMI_READ_DATA2 3 -#define PMI_WRITE_TYPE 4 -#define PMI_WRITE_DATA0 5 -#define PMI_WRITE_DATA1 6 -#define PMI_WRITE_DATA2 7 - -#define PMI_ACK 0x80 - -#define PMI_TIMEOUT 100 - -typedef struct { - u8 type; - u8 data0; - u8 data1; - u8 data2; -} pmi_message_t; - -struct pmi_handler { - struct list_head node; - u8 type; - void (*handle_pmi_message) (pmi_message_t); -}; - -int pmi_register_handler(struct pmi_handler *); -void pmi_unregister_handler(struct pmi_handler *); - -int pmi_send_message(pmi_message_t); - -#endif /* __KERNEL__ */ -#endif /* _POWERPC_PMI_H */ diff --git a/include/asm-powerpc/poll.h b/include/asm-powerpc/poll.h deleted file mode 100644 index c98509d3149e..000000000000 --- a/include/asm-powerpc/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-powerpc/posix_types.h b/include/asm-powerpc/posix_types.h deleted file mode 100644 index c4e396b540df..000000000000 --- a/include/asm-powerpc/posix_types.h +++ /dev/null @@ -1,128 +0,0 @@ -#ifndef _ASM_POWERPC_POSIX_TYPES_H -#define _ASM_POWERPC_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned int __kernel_mode_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned int __kernel_uid_t; -typedef unsigned int __kernel_gid_t; -typedef long __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef long __kernel_suseconds_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; -typedef unsigned int __kernel_old_uid_t; -typedef unsigned int __kernel_old_gid_t; - -#ifdef __powerpc64__ -typedef unsigned long __kernel_nlink_t; -typedef int __kernel_ipc_pid_t; -typedef unsigned long __kernel_size_t; -typedef long __kernel_ssize_t; -typedef unsigned long __kernel_old_dev_t; -#else -typedef unsigned short __kernel_nlink_t; -typedef short __kernel_ipc_pid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef unsigned int __kernel_old_dev_t; -#endif - -#ifdef __powerpc64__ -typedef long long __kernel_loff_t; -#else -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#ifndef __GNUC__ - -#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) -#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) -#define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0) -#define __FD_ZERO(set) \ - ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set))) - -#else /* __GNUC__ */ - -#if defined(__KERNEL__) -/* With GNU C, use inline functions instead so args are evaluated only once: */ - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - fdsetp->fds_bits[_tmp] |= (1UL<<_rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); -} - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *p) -{ - unsigned long *tmp = (unsigned long *)p->fds_bits; - int i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0; - tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0; - - case 8: - tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; - - case 4: - tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; - return; - } - } - i = __FDSET_LONGS; - while (i) { - i--; - *tmp = 0; - tmp++; - } -} - -#endif /* defined(__KERNEL__) */ -#endif /* __GNUC__ */ -#endif /* _ASM_POWERPC_POSIX_TYPES_H */ diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h deleted file mode 100644 index 854ab713f56c..000000000000 --- a/include/asm-powerpc/ppc-pci.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_POWERPC_PPC_PCI_H -#define _ASM_POWERPC_PPC_PCI_H -#ifdef __KERNEL__ - -#ifdef CONFIG_PCI - -#include -#include - -extern unsigned long isa_io_base; - -extern void pci_setup_phb_io(struct pci_controller *hose, int primary); -extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary); - - -extern struct list_head hose_list; - -extern void find_and_init_phbs(void); - -extern struct pci_dev *isa_bridge_pcidev; /* may be NULL if no ISA bus */ - -/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */ -#define BUID_HI(buid) ((buid) >> 32) -#define BUID_LO(buid) ((buid) & 0xffffffff) - -/* PCI device_node operations */ -struct device_node; -typedef void *(*traverse_func)(struct device_node *me, void *data); -void *traverse_pci_devices(struct device_node *start, traverse_func pre, - void *data); - -extern void pci_devs_phb_init(void); -extern void pci_devs_phb_init_dynamic(struct pci_controller *phb); -extern void scan_phb(struct pci_controller *hose); - -/* From rtas_pci.h */ -extern void init_pci_config_tokens (void); -extern unsigned long get_phb_buid (struct device_node *); -extern int rtas_setup_phb(struct pci_controller *phb); - -extern unsigned long pci_probe_only; - -/* ---- EEH internal-use-only related routines ---- */ -#ifdef CONFIG_EEH - -void pci_addr_cache_insert_device(struct pci_dev *dev); -void pci_addr_cache_remove_device(struct pci_dev *dev); -void pci_addr_cache_build(void); -struct pci_dev *pci_get_device_by_addr(unsigned long addr); - -/** - * eeh_slot_error_detail -- record and EEH error condition to the log - * @pdn: pci device node - * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE - * - * Obtains the EEH error details from the RTAS subsystem, - * and then logs these details with the RTAS error log system. - */ -#define EEH_LOG_TEMP_FAILURE 1 -#define EEH_LOG_PERM_FAILURE 2 -void eeh_slot_error_detail (struct pci_dn *pdn, int severity); - -/** - * rtas_pci_enable - enable IO transfers for this slot - * @pdn: pci device node - * @function: either EEH_THAW_MMIO or EEH_THAW_DMA - * - * Enable I/O transfers to this slot - */ -#define EEH_THAW_MMIO 2 -#define EEH_THAW_DMA 3 -int rtas_pci_enable(struct pci_dn *pdn, int function); - -/** - * rtas_set_slot_reset -- unfreeze a frozen slot - * @pdn: pci device node - * - * Clear the EEH-frozen condition on a slot. This routine - * does this by asserting the PCI #RST line for 1/8th of - * a second; this routine will sleep while the adapter is - * being reset. - * - * Returns a non-zero value if the reset failed. - */ -int rtas_set_slot_reset (struct pci_dn *); -int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs); - -/** - * eeh_restore_bars - Restore device configuration info. - * @pdn: pci device node - * - * A reset of a PCI device will clear out its config space. - * This routines will restore the config space for this - * device, and is children, to values previously obtained - * from the firmware. - */ -void eeh_restore_bars(struct pci_dn *); - -/** - * rtas_configure_bridge -- firmware initialization of pci bridge - * @pdn: pci device node - * - * Ask the firmware to configure all PCI bridges devices - * located behind the indicated node. Required after a - * pci device reset. Does essentially the same hing as - * eeh_restore_bars, but for brdges, and lets firmware - * do the work. - */ -void rtas_configure_bridge(struct pci_dn *); - -int rtas_write_config(struct pci_dn *, int where, int size, u32 val); -int rtas_read_config(struct pci_dn *, int where, int size, u32 *val); - -/** - * eeh_mark_slot -- set mode flags for pertition endpoint - * @pdn: pci device node - * - * mark and clear slots: find "partition endpoint" PE and set or - * clear the flags for each subnode of the PE. - */ -void eeh_mark_slot (struct device_node *dn, int mode_flag); -void eeh_clear_slot (struct device_node *dn, int mode_flag); - -/** - * find_device_pe -- Find the associated "Partiationable Endpoint" PE - * @pdn: pci device node - */ -struct device_node * find_device_pe(struct device_node *dn); - -void eeh_sysfs_add_device(struct pci_dev *pdev); -void eeh_sysfs_remove_device(struct pci_dev *pdev); - -#endif /* CONFIG_EEH */ - -#else /* CONFIG_PCI */ -static inline void find_and_init_phbs(void) { } -static inline void init_pci_config_tokens(void) { } -#endif /* !CONFIG_PCI */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_PPC_PCI_H */ diff --git a/include/asm-powerpc/ppc4xx.h b/include/asm-powerpc/ppc4xx.h deleted file mode 100644 index 033039a80c42..000000000000 --- a/include/asm-powerpc/ppc4xx.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * PPC4xx Prototypes and definitions - * - * Copyright 2008 DENX Software Engineering, Stefan Roese - * - * This is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_POWERPC_PPC4xx_H__ -#define __ASM_POWERPC_PPC4xx_H__ - -extern void ppc4xx_reset_system(char *cmd); - -#endif /* __ASM_POWERPC_PPC4xx_H__ */ diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h deleted file mode 100644 index 0966899d974b..000000000000 --- a/include/asm-powerpc/ppc_asm.h +++ /dev/null @@ -1,689 +0,0 @@ -/* - * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan. - */ -#ifndef _ASM_POWERPC_PPC_ASM_H -#define _ASM_POWERPC_PPC_ASM_H - -#include -#include -#include - -#ifndef __ASSEMBLY__ -#error __FILE__ should only be used in assembler files -#else - -#define SZL (BITS_PER_LONG/8) - -/* - * Stuff for accurate CPU time accounting. - * These macros handle transitions between user and system state - * in exception entry and exit and accumulate time to the - * user_time and system_time fields in the paca. - */ - -#ifndef CONFIG_VIRT_CPU_ACCOUNTING -#define ACCOUNT_CPU_USER_ENTRY(ra, rb) -#define ACCOUNT_CPU_USER_EXIT(ra, rb) -#else -#define ACCOUNT_CPU_USER_ENTRY(ra, rb) \ - beq 2f; /* if from kernel mode */ \ -BEGIN_FTR_SECTION; \ - mfspr ra,SPRN_PURR; /* get processor util. reg */ \ -END_FTR_SECTION_IFSET(CPU_FTR_PURR); \ -BEGIN_FTR_SECTION; \ - MFTB(ra); /* or get TB if no PURR */ \ -END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ - ld rb,PACA_STARTPURR(r13); \ - std ra,PACA_STARTPURR(r13); \ - subf rb,rb,ra; /* subtract start value */ \ - ld ra,PACA_USER_TIME(r13); \ - add ra,ra,rb; /* add on to user time */ \ - std ra,PACA_USER_TIME(r13); \ -2: - -#define ACCOUNT_CPU_USER_EXIT(ra, rb) \ -BEGIN_FTR_SECTION; \ - mfspr ra,SPRN_PURR; /* get processor util. reg */ \ -END_FTR_SECTION_IFSET(CPU_FTR_PURR); \ -BEGIN_FTR_SECTION; \ - MFTB(ra); /* or get TB if no PURR */ \ -END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ - ld rb,PACA_STARTPURR(r13); \ - std ra,PACA_STARTPURR(r13); \ - subf rb,rb,ra; /* subtract start value */ \ - ld ra,PACA_SYSTEM_TIME(r13); \ - add ra,ra,rb; /* add on to user time */ \ - std ra,PACA_SYSTEM_TIME(r13); -#endif - -/* - * Macros for storing registers into and loading registers from - * exception frames. - */ -#ifdef __powerpc64__ -#define SAVE_GPR(n, base) std n,GPR0+8*(n)(base) -#define REST_GPR(n, base) ld n,GPR0+8*(n)(base) -#define SAVE_NVGPRS(base) SAVE_8GPRS(14, base); SAVE_10GPRS(22, base) -#define REST_NVGPRS(base) REST_8GPRS(14, base); REST_10GPRS(22, base) -#else -#define SAVE_GPR(n, base) stw n,GPR0+4*(n)(base) -#define REST_GPR(n, base) lwz n,GPR0+4*(n)(base) -#define SAVE_NVGPRS(base) SAVE_GPR(13, base); SAVE_8GPRS(14, base); \ - SAVE_10GPRS(22, base) -#define REST_NVGPRS(base) REST_GPR(13, base); REST_8GPRS(14, base); \ - REST_10GPRS(22, base) -#endif - -/* - * Define what the VSX XX1 form instructions will look like, then add - * the 128 bit load store instructions based on that. - */ -#define VSX_XX1(xs, ra, rb) (((xs) & 0x1f) << 21 | ((ra) << 16) | \ - ((rb) << 11) | (((xs) >> 5))) - -#define STXVD2X(xs, ra, rb) .long (0x7c000798 | VSX_XX1((xs), (ra), (rb))) -#define LXVD2X(xs, ra, rb) .long (0x7c000698 | VSX_XX1((xs), (ra), (rb))) - -#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base) -#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base) -#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base) -#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base) -#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base) -#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base) -#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base) -#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base) - -#define SAVE_FPR(n, base) stfd n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base) -#define SAVE_2FPRS(n, base) SAVE_FPR(n, base); SAVE_FPR(n+1, base) -#define SAVE_4FPRS(n, base) SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base) -#define SAVE_8FPRS(n, base) SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base) -#define SAVE_16FPRS(n, base) SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base) -#define SAVE_32FPRS(n, base) SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base) -#define REST_FPR(n, base) lfd n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base) -#define REST_2FPRS(n, base) REST_FPR(n, base); REST_FPR(n+1, base) -#define REST_4FPRS(n, base) REST_2FPRS(n, base); REST_2FPRS(n+2, base) -#define REST_8FPRS(n, base) REST_4FPRS(n, base); REST_4FPRS(n+4, base) -#define REST_16FPRS(n, base) REST_8FPRS(n, base); REST_8FPRS(n+8, base) -#define REST_32FPRS(n, base) REST_16FPRS(n, base); REST_16FPRS(n+16, base) - -#define SAVE_VR(n,b,base) li b,THREAD_VR0+(16*(n)); stvx n,b,base -#define SAVE_2VRS(n,b,base) SAVE_VR(n,b,base); SAVE_VR(n+1,b,base) -#define SAVE_4VRS(n,b,base) SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base) -#define SAVE_8VRS(n,b,base) SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base) -#define SAVE_16VRS(n,b,base) SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base) -#define SAVE_32VRS(n,b,base) SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base) -#define REST_VR(n,b,base) li b,THREAD_VR0+(16*(n)); lvx n,b,base -#define REST_2VRS(n,b,base) REST_VR(n,b,base); REST_VR(n+1,b,base) -#define REST_4VRS(n,b,base) REST_2VRS(n,b,base); REST_2VRS(n+2,b,base) -#define REST_8VRS(n,b,base) REST_4VRS(n,b,base); REST_4VRS(n+4,b,base) -#define REST_16VRS(n,b,base) REST_8VRS(n,b,base); REST_8VRS(n+8,b,base) -#define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base) - -/* Save the lower 32 VSRs in the thread VSR region */ -#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,b,base) -#define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base) -#define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base) -#define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base) -#define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base) -#define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base) -#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base) -#define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base) -#define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base) -#define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base) -#define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base) -#define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base) -/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */ -#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,b,base) -#define SAVE_2VSRSU(n,b,base) SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base) -#define SAVE_4VSRSU(n,b,base) SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base) -#define SAVE_8VSRSU(n,b,base) SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base) -#define SAVE_16VSRSU(n,b,base) SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base) -#define SAVE_32VSRSU(n,b,base) SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base) -#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base) -#define REST_2VSRSU(n,b,base) REST_VSRU(n,b,base); REST_VSRU(n+1,b,base) -#define REST_4VSRSU(n,b,base) REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base) -#define REST_8VSRSU(n,b,base) REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base) -#define REST_16VSRSU(n,b,base) REST_8VSRSU(n,b,base); REST_8VSRSU(n+8,b,base) -#define REST_32VSRSU(n,b,base) REST_16VSRSU(n,b,base); REST_16VSRSU(n+16,b,base) - -#define SAVE_EVR(n,s,base) evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base) -#define SAVE_2EVRS(n,s,base) SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base) -#define SAVE_4EVRS(n,s,base) SAVE_2EVRS(n,s,base); SAVE_2EVRS(n+2,s,base) -#define SAVE_8EVRS(n,s,base) SAVE_4EVRS(n,s,base); SAVE_4EVRS(n+4,s,base) -#define SAVE_16EVRS(n,s,base) SAVE_8EVRS(n,s,base); SAVE_8EVRS(n+8,s,base) -#define SAVE_32EVRS(n,s,base) SAVE_16EVRS(n,s,base); SAVE_16EVRS(n+16,s,base) -#define REST_EVR(n,s,base) lwz s,THREAD_EVR0+4*(n)(base); evmergelo n,s,n -#define REST_2EVRS(n,s,base) REST_EVR(n,s,base); REST_EVR(n+1,s,base) -#define REST_4EVRS(n,s,base) REST_2EVRS(n,s,base); REST_2EVRS(n+2,s,base) -#define REST_8EVRS(n,s,base) REST_4EVRS(n,s,base); REST_4EVRS(n+4,s,base) -#define REST_16EVRS(n,s,base) REST_8EVRS(n,s,base); REST_8EVRS(n+8,s,base) -#define REST_32EVRS(n,s,base) REST_16EVRS(n,s,base); REST_16EVRS(n+16,s,base) - -/* Macros to adjust thread priority for hardware multithreading */ -#define HMT_VERY_LOW or 31,31,31 # very low priority -#define HMT_LOW or 1,1,1 -#define HMT_MEDIUM_LOW or 6,6,6 # medium low priority -#define HMT_MEDIUM or 2,2,2 -#define HMT_MEDIUM_HIGH or 5,5,5 # medium high priority -#define HMT_HIGH or 3,3,3 - -/* handle instructions that older assemblers may not know */ -#define RFCI .long 0x4c000066 /* rfci instruction */ -#define RFDI .long 0x4c00004e /* rfdi instruction */ -#define RFMCI .long 0x4c00004c /* rfmci instruction */ - -#ifdef __KERNEL__ -#ifdef CONFIG_PPC64 - -#define XGLUE(a,b) a##b -#define GLUE(a,b) XGLUE(a,b) - -#define _GLOBAL(name) \ - .section ".text"; \ - .align 2 ; \ - .globl name; \ - .globl GLUE(.,name); \ - .section ".opd","aw"; \ -name: \ - .quad GLUE(.,name); \ - .quad .TOC.@tocbase; \ - .quad 0; \ - .previous; \ - .type GLUE(.,name),@function; \ -GLUE(.,name): - -#define _INIT_GLOBAL(name) \ - .section ".text.init.refok"; \ - .align 2 ; \ - .globl name; \ - .globl GLUE(.,name); \ - .section ".opd","aw"; \ -name: \ - .quad GLUE(.,name); \ - .quad .TOC.@tocbase; \ - .quad 0; \ - .previous; \ - .type GLUE(.,name),@function; \ -GLUE(.,name): - -#define _KPROBE(name) \ - .section ".kprobes.text","a"; \ - .align 2 ; \ - .globl name; \ - .globl GLUE(.,name); \ - .section ".opd","aw"; \ -name: \ - .quad GLUE(.,name); \ - .quad .TOC.@tocbase; \ - .quad 0; \ - .previous; \ - .type GLUE(.,name),@function; \ -GLUE(.,name): - -#define _STATIC(name) \ - .section ".text"; \ - .align 2 ; \ - .section ".opd","aw"; \ -name: \ - .quad GLUE(.,name); \ - .quad .TOC.@tocbase; \ - .quad 0; \ - .previous; \ - .type GLUE(.,name),@function; \ -GLUE(.,name): - -#define _INIT_STATIC(name) \ - .section ".text.init.refok"; \ - .align 2 ; \ - .section ".opd","aw"; \ -name: \ - .quad GLUE(.,name); \ - .quad .TOC.@tocbase; \ - .quad 0; \ - .previous; \ - .type GLUE(.,name),@function; \ -GLUE(.,name): - -#else /* 32-bit */ - -#define _ENTRY(n) \ - .globl n; \ -n: - -#define _GLOBAL(n) \ - .text; \ - .stabs __stringify(n:F-1),N_FUN,0,0,n;\ - .globl n; \ -n: - -#define _KPROBE(n) \ - .section ".kprobes.text","a"; \ - .globl n; \ -n: - -#endif - -/* - * LOAD_REG_IMMEDIATE(rn, expr) - * Loads the value of the constant expression 'expr' into register 'rn' - * using immediate instructions only. Use this when it's important not - * to reference other data (i.e. on ppc64 when the TOC pointer is not - * valid). - * - * LOAD_REG_ADDR(rn, name) - * Loads the address of label 'name' into register 'rn'. Use this when - * you don't particularly need immediate instructions only, but you need - * the whole address in one register (e.g. it's a structure address and - * you want to access various offsets within it). On ppc32 this is - * identical to LOAD_REG_IMMEDIATE. - * - * LOAD_REG_ADDRBASE(rn, name) - * ADDROFF(name) - * LOAD_REG_ADDRBASE loads part of the address of label 'name' into - * register 'rn'. ADDROFF(name) returns the remainder of the address as - * a constant expression. ADDROFF(name) is a signed expression < 16 bits - * in size, so is suitable for use directly as an offset in load and store - * instructions. Use this when loading/storing a single word or less as: - * LOAD_REG_ADDRBASE(rX, name) - * ld rY,ADDROFF(name)(rX) - */ -#ifdef __powerpc64__ -#define LOAD_REG_IMMEDIATE(reg,expr) \ - lis (reg),(expr)@highest; \ - ori (reg),(reg),(expr)@higher; \ - rldicr (reg),(reg),32,31; \ - oris (reg),(reg),(expr)@h; \ - ori (reg),(reg),(expr)@l; - -#define LOAD_REG_ADDR(reg,name) \ - ld (reg),name@got(r2) - -#define LOAD_REG_ADDRBASE(reg,name) LOAD_REG_ADDR(reg,name) -#define ADDROFF(name) 0 - -/* offsets for stack frame layout */ -#define LRSAVE 16 - -#else /* 32-bit */ - -#define LOAD_REG_IMMEDIATE(reg,expr) \ - lis (reg),(expr)@ha; \ - addi (reg),(reg),(expr)@l; - -#define LOAD_REG_ADDR(reg,name) LOAD_REG_IMMEDIATE(reg, name) - -#define LOAD_REG_ADDRBASE(reg, name) lis (reg),name@ha -#define ADDROFF(name) name@l - -/* offsets for stack frame layout */ -#define LRSAVE 4 - -#endif - -/* various errata or part fixups */ -#ifdef CONFIG_PPC601_SYNC_FIX -#define SYNC \ -BEGIN_FTR_SECTION \ - sync; \ - isync; \ -END_FTR_SECTION_IFSET(CPU_FTR_601) -#define SYNC_601 \ -BEGIN_FTR_SECTION \ - sync; \ -END_FTR_SECTION_IFSET(CPU_FTR_601) -#define ISYNC_601 \ -BEGIN_FTR_SECTION \ - isync; \ -END_FTR_SECTION_IFSET(CPU_FTR_601) -#else -#define SYNC -#define SYNC_601 -#define ISYNC_601 -#endif - -#ifdef CONFIG_PPC_CELL -#define MFTB(dest) \ -90: mftb dest; \ -BEGIN_FTR_SECTION_NESTED(96); \ - cmpwi dest,0; \ - beq- 90b; \ -END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96) -#else -#define MFTB(dest) mftb dest -#endif - -#ifndef CONFIG_SMP -#define TLBSYNC -#else /* CONFIG_SMP */ -/* tlbsync is not implemented on 601 */ -#define TLBSYNC \ -BEGIN_FTR_SECTION \ - tlbsync; \ - sync; \ -END_FTR_SECTION_IFCLR(CPU_FTR_601) -#endif - - -/* - * This instruction is not implemented on the PPC 603 or 601; however, on - * the 403GCX and 405GP tlbia IS defined and tlbie is not. - * All of these instructions exist in the 8xx, they have magical powers, - * and they must be used. - */ - -#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx) -#define tlbia \ - li r4,1024; \ - mtctr r4; \ - lis r4,KERNELBASE@h; \ -0: tlbie r4; \ - addi r4,r4,0x1000; \ - bdnz 0b -#endif - - -#ifdef CONFIG_IBM440EP_ERR42 -#define PPC440EP_ERR42 isync -#else -#define PPC440EP_ERR42 -#endif - - -#if defined(CONFIG_BOOKE) -#define toreal(rd) -#define fromreal(rd) - -/* - * We use addis to ensure compatibility with the "classic" ppc versions of - * these macros, which use rs = 0 to get the tophys offset in rd, rather than - * converting the address in r0, and so this version has to do that too - * (i.e. set register rd to 0 when rs == 0). - */ -#define tophys(rd,rs) \ - addis rd,rs,0 - -#define tovirt(rd,rs) \ - addis rd,rs,0 - -#elif defined(CONFIG_PPC64) -#define toreal(rd) /* we can access c000... in real mode */ -#define fromreal(rd) - -#define tophys(rd,rs) \ - clrldi rd,rs,2 - -#define tovirt(rd,rs) \ - rotldi rd,rs,16; \ - ori rd,rd,((KERNELBASE>>48)&0xFFFF);\ - rotldi rd,rd,48 -#else -/* - * On APUS (Amiga PowerPC cpu upgrade board), we don't know the - * physical base address of RAM at compile time. - */ -#define toreal(rd) tophys(rd,rd) -#define fromreal(rd) tovirt(rd,rd) - -#define tophys(rd,rs) \ -0: addis rd,rs,-KERNELBASE@h; \ - .section ".vtop_fixup","aw"; \ - .align 1; \ - .long 0b; \ - .previous - -#define tovirt(rd,rs) \ -0: addis rd,rs,KERNELBASE@h; \ - .section ".ptov_fixup","aw"; \ - .align 1; \ - .long 0b; \ - .previous -#endif - -#ifdef CONFIG_PPC64 -#define RFI rfid -#define MTMSRD(r) mtmsrd r - -#else -#define FIX_SRR1(ra, rb) -#ifndef CONFIG_40x -#define RFI rfi -#else -#define RFI rfi; b . /* Prevent prefetch past rfi */ -#endif -#define MTMSRD(r) mtmsr r -#define CLR_TOP32(r) -#endif - -#endif /* __KERNEL__ */ - -/* The boring bits... */ - -/* Condition Register Bit Fields */ - -#define cr0 0 -#define cr1 1 -#define cr2 2 -#define cr3 3 -#define cr4 4 -#define cr5 5 -#define cr6 6 -#define cr7 7 - - -/* General Purpose Registers (GPRs) */ - -#define r0 0 -#define r1 1 -#define r2 2 -#define r3 3 -#define r4 4 -#define r5 5 -#define r6 6 -#define r7 7 -#define r8 8 -#define r9 9 -#define r10 10 -#define r11 11 -#define r12 12 -#define r13 13 -#define r14 14 -#define r15 15 -#define r16 16 -#define r17 17 -#define r18 18 -#define r19 19 -#define r20 20 -#define r21 21 -#define r22 22 -#define r23 23 -#define r24 24 -#define r25 25 -#define r26 26 -#define r27 27 -#define r28 28 -#define r29 29 -#define r30 30 -#define r31 31 - - -/* Floating Point Registers (FPRs) */ - -#define fr0 0 -#define fr1 1 -#define fr2 2 -#define fr3 3 -#define fr4 4 -#define fr5 5 -#define fr6 6 -#define fr7 7 -#define fr8 8 -#define fr9 9 -#define fr10 10 -#define fr11 11 -#define fr12 12 -#define fr13 13 -#define fr14 14 -#define fr15 15 -#define fr16 16 -#define fr17 17 -#define fr18 18 -#define fr19 19 -#define fr20 20 -#define fr21 21 -#define fr22 22 -#define fr23 23 -#define fr24 24 -#define fr25 25 -#define fr26 26 -#define fr27 27 -#define fr28 28 -#define fr29 29 -#define fr30 30 -#define fr31 31 - -/* AltiVec Registers (VPRs) */ - -#define vr0 0 -#define vr1 1 -#define vr2 2 -#define vr3 3 -#define vr4 4 -#define vr5 5 -#define vr6 6 -#define vr7 7 -#define vr8 8 -#define vr9 9 -#define vr10 10 -#define vr11 11 -#define vr12 12 -#define vr13 13 -#define vr14 14 -#define vr15 15 -#define vr16 16 -#define vr17 17 -#define vr18 18 -#define vr19 19 -#define vr20 20 -#define vr21 21 -#define vr22 22 -#define vr23 23 -#define vr24 24 -#define vr25 25 -#define vr26 26 -#define vr27 27 -#define vr28 28 -#define vr29 29 -#define vr30 30 -#define vr31 31 - -/* VSX Registers (VSRs) */ - -#define vsr0 0 -#define vsr1 1 -#define vsr2 2 -#define vsr3 3 -#define vsr4 4 -#define vsr5 5 -#define vsr6 6 -#define vsr7 7 -#define vsr8 8 -#define vsr9 9 -#define vsr10 10 -#define vsr11 11 -#define vsr12 12 -#define vsr13 13 -#define vsr14 14 -#define vsr15 15 -#define vsr16 16 -#define vsr17 17 -#define vsr18 18 -#define vsr19 19 -#define vsr20 20 -#define vsr21 21 -#define vsr22 22 -#define vsr23 23 -#define vsr24 24 -#define vsr25 25 -#define vsr26 26 -#define vsr27 27 -#define vsr28 28 -#define vsr29 29 -#define vsr30 30 -#define vsr31 31 -#define vsr32 32 -#define vsr33 33 -#define vsr34 34 -#define vsr35 35 -#define vsr36 36 -#define vsr37 37 -#define vsr38 38 -#define vsr39 39 -#define vsr40 40 -#define vsr41 41 -#define vsr42 42 -#define vsr43 43 -#define vsr44 44 -#define vsr45 45 -#define vsr46 46 -#define vsr47 47 -#define vsr48 48 -#define vsr49 49 -#define vsr50 50 -#define vsr51 51 -#define vsr52 52 -#define vsr53 53 -#define vsr54 54 -#define vsr55 55 -#define vsr56 56 -#define vsr57 57 -#define vsr58 58 -#define vsr59 59 -#define vsr60 60 -#define vsr61 61 -#define vsr62 62 -#define vsr63 63 - -/* SPE Registers (EVPRs) */ - -#define evr0 0 -#define evr1 1 -#define evr2 2 -#define evr3 3 -#define evr4 4 -#define evr5 5 -#define evr6 6 -#define evr7 7 -#define evr8 8 -#define evr9 9 -#define evr10 10 -#define evr11 11 -#define evr12 12 -#define evr13 13 -#define evr14 14 -#define evr15 15 -#define evr16 16 -#define evr17 17 -#define evr18 18 -#define evr19 19 -#define evr20 20 -#define evr21 21 -#define evr22 22 -#define evr23 23 -#define evr24 24 -#define evr25 25 -#define evr26 26 -#define evr27 27 -#define evr28 28 -#define evr29 29 -#define evr30 30 -#define evr31 31 - -/* some stab codes */ -#define N_FUN 36 -#define N_RSYM 64 -#define N_SLINE 68 -#define N_SO 100 - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_PPC_ASM_H */ diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h deleted file mode 100644 index 101ed87f7d84..000000000000 --- a/include/asm-powerpc/processor.h +++ /dev/null @@ -1,314 +0,0 @@ -#ifndef _ASM_POWERPC_PROCESSOR_H -#define _ASM_POWERPC_PROCESSOR_H - -/* - * Copyright (C) 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include - -#ifdef CONFIG_VSX -#define TS_FPRWIDTH 2 -#else -#define TS_FPRWIDTH 1 -#endif - -#ifndef __ASSEMBLY__ -#include -#include -#include - -/* We do _not_ want to define new machine types at all, those must die - * in favor of using the device-tree - * -- BenH. - */ - -/* PREP sub-platform types see residual.h for these */ -#define _PREP_Motorola 0x01 /* motorola prep */ -#define _PREP_Firm 0x02 /* firmworks prep */ -#define _PREP_IBM 0x00 /* ibm prep */ -#define _PREP_Bull 0x03 /* bull prep */ - -/* CHRP sub-platform types. These are arbitrary */ -#define _CHRP_Motorola 0x04 /* motorola chrp, the cobra */ -#define _CHRP_IBM 0x05 /* IBM chrp, the longtrail and longtrail 2 */ -#define _CHRP_Pegasos 0x06 /* Genesi/bplan's Pegasos and Pegasos2 */ -#define _CHRP_briq 0x07 /* TotalImpact's briQ */ - -#if defined(__KERNEL__) && defined(CONFIG_PPC32) - -extern int _chrp_type; - -#ifdef CONFIG_PPC_PREP - -/* what kind of prep workstation we are */ -extern int _prep_type; - -#endif /* CONFIG_PPC_PREP */ - -#endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */ - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -/* Macros for adjusting thread priority (hardware multi-threading) */ -#define HMT_very_low() asm volatile("or 31,31,31 # very low priority") -#define HMT_low() asm volatile("or 1,1,1 # low priority") -#define HMT_medium_low() asm volatile("or 6,6,6 # medium low priority") -#define HMT_medium() asm volatile("or 2,2,2 # medium priority") -#define HMT_medium_high() asm volatile("or 5,5,5 # medium high priority") -#define HMT_high() asm volatile("or 3,3,3 # high priority") - -#ifdef __KERNEL__ - -extern int have_of; - -struct task_struct; -void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp); -void release_thread(struct task_struct *); - -/* Prepare to copy thread state - unlazy all lazy status */ -extern void prepare_to_copy(struct task_struct *tsk); - -/* Create a new kernel thread. */ -extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - -/* Lazy FPU handling on uni-processor */ -extern struct task_struct *last_task_used_math; -extern struct task_struct *last_task_used_altivec; -extern struct task_struct *last_task_used_vsx; -extern struct task_struct *last_task_used_spe; - -#ifdef CONFIG_PPC32 - -#if CONFIG_TASK_SIZE > CONFIG_KERNEL_START -#error User TASK_SIZE overlaps with KERNEL_START address -#endif -#define TASK_SIZE (CONFIG_TASK_SIZE) - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3) -#endif - -#ifdef CONFIG_PPC64 -/* 64-bit user address space is 44-bits (16TB user VM) */ -#define TASK_SIZE_USER64 (0x0000100000000000UL) - -/* - * 32-bit user address space is 4GB - 1 page - * (this 1 page is needed so referencing of 0xFFFFFFFF generates EFAULT - */ -#define TASK_SIZE_USER32 (0x0000000100000000UL - (1*PAGE_SIZE)) - -#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \ - TASK_SIZE_USER32 : TASK_SIZE_USER64) -#define TASK_SIZE TASK_SIZE_OF(current) - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4)) -#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_USER64 / 4)) - -#define TASK_UNMAPPED_BASE ((test_thread_flag(TIF_32BIT)) ? \ - TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 ) -#endif - -#ifdef __KERNEL__ -#ifdef __powerpc64__ - -#define STACK_TOP_USER64 TASK_SIZE_USER64 -#define STACK_TOP_USER32 TASK_SIZE_USER32 - -#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \ - STACK_TOP_USER32 : STACK_TOP_USER64) - -#define STACK_TOP_MAX STACK_TOP_USER64 - -#else /* __powerpc64__ */ - -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP - -#endif /* __powerpc64__ */ -#endif /* __KERNEL__ */ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#define TS_FPROFFSET 0 -#define TS_VSRLOWOFFSET 1 -#define TS_FPR(i) fpr[i][TS_FPROFFSET] - -struct thread_struct { - unsigned long ksp; /* Kernel stack pointer */ - unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ - -#ifdef CONFIG_PPC64 - unsigned long ksp_vsid; -#endif - struct pt_regs *regs; /* Pointer to saved register state */ - mm_segment_t fs; /* for get_fs() validation */ -#ifdef CONFIG_PPC32 - void *pgdir; /* root of page-table tree */ -#endif -#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE) - unsigned long dbcr0; /* debug control register values */ - unsigned long dbcr1; -#endif - /* FP and VSX 0-31 register set */ - double fpr[32][TS_FPRWIDTH]; - struct { - - unsigned int pad; - unsigned int val; /* Floating point status */ - } fpscr; - int fpexc_mode; /* floating-point exception mode */ - unsigned int align_ctl; /* alignment handling control */ -#ifdef CONFIG_PPC64 - unsigned long start_tb; /* Start purr when proc switched in */ - unsigned long accum_tb; /* Total accumilated purr for process */ -#endif - unsigned long dabr; /* Data address breakpoint register */ -#ifdef CONFIG_ALTIVEC - /* Complete AltiVec register set */ - vector128 vr[32] __attribute__((aligned(16))); - /* AltiVec status */ - vector128 vscr __attribute__((aligned(16))); - unsigned long vrsave; - int used_vr; /* set if process has used altivec */ -#endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_VSX - /* VSR status */ - int used_vsr; /* set if process has used altivec */ -#endif /* CONFIG_VSX */ -#ifdef CONFIG_SPE - unsigned long evr[32]; /* upper 32-bits of SPE regs */ - u64 acc; /* Accumulator */ - unsigned long spefscr; /* SPE & eFP status */ - int used_spe; /* set if process has used spe */ -#endif /* CONFIG_SPE */ -}; - -#define ARCH_MIN_TASKALIGN 16 - -#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack) -#define INIT_SP_LIMIT \ - (_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack) - - -#ifdef CONFIG_PPC32 -#define INIT_THREAD { \ - .ksp = INIT_SP, \ - .ksp_limit = INIT_SP_LIMIT, \ - .fs = KERNEL_DS, \ - .pgdir = swapper_pg_dir, \ - .fpexc_mode = MSR_FE0 | MSR_FE1, \ -} -#else -#define INIT_THREAD { \ - .ksp = INIT_SP, \ - .ksp_limit = INIT_SP_LIMIT, \ - .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ - .fs = KERNEL_DS, \ - .fpr = {{0}}, \ - .fpscr = { .val = 0, }, \ - .fpexc_mode = 0, \ -} -#endif - -/* - * Return saved PC of a blocked thread. For now, this is the "user" PC - */ -#define thread_saved_pc(tsk) \ - ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0) - -#define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.regs) - -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0) -#define KSTK_ESP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->gpr[1]: 0) - -/* Get/set floating-point exception mode */ -#define GET_FPEXC_CTL(tsk, adr) get_fpexc_mode((tsk), (adr)) -#define SET_FPEXC_CTL(tsk, val) set_fpexc_mode((tsk), (val)) - -extern int get_fpexc_mode(struct task_struct *tsk, unsigned long adr); -extern int set_fpexc_mode(struct task_struct *tsk, unsigned int val); - -#define GET_ENDIAN(tsk, adr) get_endian((tsk), (adr)) -#define SET_ENDIAN(tsk, val) set_endian((tsk), (val)) - -extern int get_endian(struct task_struct *tsk, unsigned long adr); -extern int set_endian(struct task_struct *tsk, unsigned int val); - -#define GET_UNALIGN_CTL(tsk, adr) get_unalign_ctl((tsk), (adr)) -#define SET_UNALIGN_CTL(tsk, val) set_unalign_ctl((tsk), (val)) - -extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr); -extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val); - -static inline unsigned int __unpack_fe01(unsigned long msr_bits) -{ - return ((msr_bits & MSR_FE0) >> 10) | ((msr_bits & MSR_FE1) >> 8); -} - -static inline unsigned long __pack_fe01(unsigned int fpmode) -{ - return ((fpmode << 10) & MSR_FE0) | ((fpmode << 8) & MSR_FE1); -} - -#ifdef CONFIG_PPC64 -#define cpu_relax() do { HMT_low(); HMT_medium(); barrier(); } while (0) -#else -#define cpu_relax() barrier() -#endif - -/* Check that a certain kernel stack pointer is valid in task_struct p */ -int validate_sp(unsigned long sp, struct task_struct *p, - unsigned long nbytes); - -/* - * Prefetch macros. - */ -#define ARCH_HAS_PREFETCH -#define ARCH_HAS_PREFETCHW -#define ARCH_HAS_SPINLOCK_PREFETCH - -static inline void prefetch(const void *x) -{ - if (unlikely(!x)) - return; - - __asm__ __volatile__ ("dcbt 0,%0" : : "r" (x)); -} - -static inline void prefetchw(const void *x) -{ - if (unlikely(!x)) - return; - - __asm__ __volatile__ ("dcbtst 0,%0" : : "r" (x)); -} - -#define spin_lock_prefetch(x) prefetchw(x) - -#ifdef CONFIG_PPC64 -#define HAVE_ARCH_PICK_MMAP_LAYOUT -#endif - -#endif /* __KERNEL__ */ -#endif /* __ASSEMBLY__ */ -#endif /* _ASM_POWERPC_PROCESSOR_H */ diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h deleted file mode 100644 index eb3bd2e1c7f6..000000000000 --- a/include/asm-powerpc/prom.h +++ /dev/null @@ -1,356 +0,0 @@ -#ifndef _POWERPC_PROM_H -#define _POWERPC_PROM_H -#ifdef __KERNEL__ - -/* - * Definitions for talking to the Open Firmware PROM on - * Power Macintosh computers. - * - * Copyright (C) 1996-2005 Paul Mackerras. - * - * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include -#include -#include - -#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1 -#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1 - -#define of_compat_cmp(s1, s2, l) strcasecmp((s1), (s2)) -#define of_prop_cmp(s1, s2) strcmp((s1), (s2)) -#define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) - -/* Definitions used by the flattened device tree */ -#define OF_DT_HEADER 0xd00dfeed /* marker */ -#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ -#define OF_DT_END_NODE 0x2 /* End node */ -#define OF_DT_PROP 0x3 /* Property: name off, size, - * content */ -#define OF_DT_NOP 0x4 /* nop */ -#define OF_DT_END 0x9 - -#define OF_DT_VERSION 0x10 - -/* - * This is what gets passed to the kernel by prom_init or kexec - * - * The dt struct contains the device tree structure, full pathes and - * property contents. The dt strings contain a separate block with just - * the strings for the property names, and is fully page aligned and - * self contained in a page, so that it can be kept around by the kernel, - * each property name appears only once in this page (cheap compression) - * - * the mem_rsvmap contains a map of reserved ranges of physical memory, - * passing it here instead of in the device-tree itself greatly simplifies - * the job of everybody. It's just a list of u64 pairs (base/size) that - * ends when size is 0 - */ -struct boot_param_header -{ - u32 magic; /* magic word OF_DT_HEADER */ - u32 totalsize; /* total size of DT block */ - u32 off_dt_struct; /* offset to structure */ - u32 off_dt_strings; /* offset to strings */ - u32 off_mem_rsvmap; /* offset to memory reserve map */ - u32 version; /* format version */ - u32 last_comp_version; /* last compatible version */ - /* version 2 fields below */ - u32 boot_cpuid_phys; /* Physical CPU id we're booting on */ - /* version 3 fields below */ - u32 dt_strings_size; /* size of the DT strings block */ - /* version 17 fields below */ - u32 dt_struct_size; /* size of the DT structure block */ -}; - - - -typedef u32 phandle; -typedef u32 ihandle; - -struct property { - char *name; - int length; - void *value; - struct property *next; -}; - -struct device_node { - const char *name; - const char *type; - phandle node; - phandle linux_phandle; - char *full_name; - - struct property *properties; - struct property *deadprops; /* removed properties */ - struct device_node *parent; - struct device_node *child; - struct device_node *sibling; - struct device_node *next; /* next device of same type */ - struct device_node *allnext; /* next in list of all nodes */ - struct proc_dir_entry *pde; /* this node's proc directory */ - struct kref kref; - unsigned long _flags; - void *data; -}; - -extern struct device_node *of_chosen; - -static inline int of_node_check_flag(struct device_node *n, unsigned long flag) -{ - return test_bit(flag, &n->_flags); -} - -static inline void of_node_set_flag(struct device_node *n, unsigned long flag) -{ - set_bit(flag, &n->_flags); -} - - -#define HAVE_ARCH_DEVTREE_FIXUPS - -static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de) -{ - dn->pde = de; -} - - -extern struct device_node *of_find_all_nodes(struct device_node *prev); -extern struct device_node *of_node_get(struct device_node *node); -extern void of_node_put(struct device_node *node); - -/* For scanning the flat device-tree at boot time */ -extern int __init of_scan_flat_dt(int (*it)(unsigned long node, - const char *uname, int depth, - void *data), - void *data); -extern void* __init of_get_flat_dt_prop(unsigned long node, const char *name, - unsigned long *size); -extern int __init of_flat_dt_is_compatible(unsigned long node, const char *name); -extern unsigned long __init of_get_flat_dt_root(void); - -/* For updating the device tree at runtime */ -extern void of_attach_node(struct device_node *); -extern void of_detach_node(struct device_node *); - -/* Other Prototypes */ -extern void finish_device_tree(void); -extern void unflatten_device_tree(void); -extern void early_init_devtree(void *); -extern int machine_is_compatible(const char *compat); -extern void print_properties(struct device_node *node); -extern int prom_n_intr_cells(struct device_node* np); -extern void prom_get_irq_senses(unsigned char *senses, int off, int max); -extern int prom_add_property(struct device_node* np, struct property* prop); -extern int prom_remove_property(struct device_node *np, struct property *prop); -extern int prom_update_property(struct device_node *np, - struct property *newprop, - struct property *oldprop); - -#ifdef CONFIG_PPC32 -/* - * PCI <-> OF matching functions - * (XXX should these be here?) - */ -struct pci_bus; -struct pci_dev; -extern int pci_device_from_OF_node(struct device_node *node, - u8* bus, u8* devfn); -extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int); -extern struct device_node* pci_device_to_OF_node(struct pci_dev *); -extern void pci_create_OF_bus_map(void); -#endif - -extern struct resource *request_OF_resource(struct device_node* node, - int index, const char* name_postfix); -extern int release_OF_resource(struct device_node* node, int index); - - -/* - * OF address retreival & translation - */ - - -/* Helper to read a big number; size is in cells (not bytes) */ -static inline u64 of_read_number(const u32 *cell, int size) -{ - u64 r = 0; - while (size--) - r = (r << 32) | *(cell++); - return r; -} - -/* Like of_read_number, but we want an unsigned long result */ -#ifdef CONFIG_PPC32 -static inline unsigned long of_read_ulong(const u32 *cell, int size) -{ - return cell[size-1]; -} -#else -#define of_read_ulong(cell, size) of_read_number(cell, size) -#endif - -/* Translate an OF address block into a CPU physical address - */ -extern u64 of_translate_address(struct device_node *np, const u32 *addr); - -/* Translate a DMA address from device space to CPU space */ -extern u64 of_translate_dma_address(struct device_node *dev, - const u32 *in_addr); - -/* Extract an address from a device, returns the region size and - * the address space flags too. The PCI version uses a BAR number - * instead of an absolute index - */ -extern const u32 *of_get_address(struct device_node *dev, int index, - u64 *size, unsigned int *flags); -#ifdef CONFIG_PCI -extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no, - u64 *size, unsigned int *flags); -#else -static inline const u32 *of_get_pci_address(struct device_node *dev, - int bar_no, u64 *size, unsigned int *flags) -{ - return NULL; -} -#endif /* CONFIG_PCI */ - -/* Get an address as a resource. Note that if your address is - * a PIO address, the conversion will fail if the physical address - * can't be internally converted to an IO token with - * pci_address_to_pio(), that is because it's either called to early - * or it can't be matched to any host bridge IO space - */ -extern int of_address_to_resource(struct device_node *dev, int index, - struct resource *r); -#ifdef CONFIG_PCI -extern int of_pci_address_to_resource(struct device_node *dev, int bar, - struct resource *r); -#else -static inline int of_pci_address_to_resource(struct device_node *dev, int bar, - struct resource *r) -{ - return -ENOSYS; -} -#endif /* CONFIG_PCI */ - -/* Parse the ibm,dma-window property of an OF node into the busno, phys and - * size parameters. - */ -void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, - unsigned long *busno, unsigned long *phys, unsigned long *size); - -extern void kdump_move_device_tree(void); - -/* CPU OF node matching */ -struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); - -/* Get the MAC address */ -extern const void *of_get_mac_address(struct device_node *np); - -/* - * OF interrupt mapping - */ - -/* This structure is returned when an interrupt is mapped. The controller - * field needs to be put() after use - */ - -#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */ - -struct of_irq { - struct device_node *controller; /* Interrupt controller node */ - u32 size; /* Specifier size */ - u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */ -}; - -/** - * of_irq_map_init - Initialize the irq remapper - * @flags: flags defining workarounds to enable - * - * Some machines have bugs in the device-tree which require certain workarounds - * to be applied. Call this before any interrupt mapping attempts to enable - * those workarounds. - */ -#define OF_IMAP_OLDWORLD_MAC 0x00000001 -#define OF_IMAP_NO_PHANDLE 0x00000002 - -extern void of_irq_map_init(unsigned int flags); - -/** - * of_irq_map_raw - Low level interrupt tree parsing - * @parent: the device interrupt parent - * @intspec: interrupt specifier ("interrupts" property of the device) - * @ointsize: size of the passed in interrupt specifier - * @addr: address specifier (start of "reg" property of the device) - * @out_irq: structure of_irq filled by this function - * - * Returns 0 on success and a negative number on error - * - * This function is a low-level interrupt tree walking function. It - * can be used to do a partial walk with synthetized reg and interrupts - * properties, for example when resolving PCI interrupts when no device - * node exist for the parent. - * - */ - -extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec, - u32 ointsize, const u32 *addr, - struct of_irq *out_irq); - - -/** - * of_irq_map_one - Resolve an interrupt for a device - * @device: the device whose interrupt is to be resolved - * @index: index of the interrupt to resolve - * @out_irq: structure of_irq filled by this function - * - * This function resolves an interrupt, walking the tree, for a given - * device-tree node. It's the high level pendant to of_irq_map_raw(). - * It also implements the workarounds for OldWolrd Macs. - */ -extern int of_irq_map_one(struct device_node *device, int index, - struct of_irq *out_irq); - -/** - * of_irq_map_pci - Resolve the interrupt for a PCI device - * @pdev: the device whose interrupt is to be resolved - * @out_irq: structure of_irq filled by this function - * - * This function resolves the PCI interrupt for a given PCI device. If a - * device-node exists for a given pci_dev, it will use normal OF tree - * walking. If not, it will implement standard swizzling and walk up the - * PCI tree until an device-node is found, at which point it will finish - * resolving using the OF tree walking. - */ -struct pci_dev; -extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); - -extern int of_irq_to_resource(struct device_node *dev, int index, - struct resource *r); - -/** - * of_iomap - Maps the memory mapped IO for a given device_node - * @device: the device whose io range will be mapped - * @index: index of the io range - * - * Returns a pointer to the mapped memory - */ -extern void __iomem *of_iomap(struct device_node *device, int index); - -/* - * NB: This is here while we transition from using asm/prom.h - * to linux/of.h - */ -#include - -#endif /* __KERNEL__ */ -#endif /* _POWERPC_PROM_H */ diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h deleted file mode 100644 index f9e34c493cbb..000000000000 --- a/include/asm-powerpc/ps3.h +++ /dev/null @@ -1,519 +0,0 @@ -/* - * PS3 platform declarations. - * - * Copyright (C) 2006 Sony Computer Entertainment Inc. - * Copyright 2006 Sony Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if !defined(_ASM_POWERPC_PS3_H) -#define _ASM_POWERPC_PS3_H - -#include -#include -#include -#include "cell-pmu.h" - -union ps3_firmware_version { - u64 raw; - struct { - u16 pad; - u16 major; - u16 minor; - u16 rev; - }; -}; - -void ps3_get_firmware_version(union ps3_firmware_version *v); -int ps3_compare_firmware_version(u16 major, u16 minor, u16 rev); - -/* 'Other OS' area */ - -enum ps3_param_av_multi_out { - PS3_PARAM_AV_MULTI_OUT_NTSC = 0, - PS3_PARAM_AV_MULTI_OUT_PAL_RGB = 1, - PS3_PARAM_AV_MULTI_OUT_PAL_YCBCR = 2, - PS3_PARAM_AV_MULTI_OUT_SECAM = 3, -}; - -enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void); - -/* dma routines */ - -enum ps3_dma_page_size { - PS3_DMA_4K = 12U, - PS3_DMA_64K = 16U, - PS3_DMA_1M = 20U, - PS3_DMA_16M = 24U, -}; - -enum ps3_dma_region_type { - PS3_DMA_OTHER = 0, - PS3_DMA_INTERNAL = 2, -}; - -struct ps3_dma_region_ops; - -/** - * struct ps3_dma_region - A per device dma state variables structure - * @did: The HV device id. - * @page_size: The ioc pagesize. - * @region_type: The HV region type. - * @bus_addr: The 'translated' bus address of the region. - * @len: The length in bytes of the region. - * @offset: The offset from the start of memory of the region. - * @ioid: The IOID of the device who owns this region - * @chunk_list: Opaque variable used by the ioc page manager. - * @region_ops: struct ps3_dma_region_ops - dma region operations - */ - -struct ps3_dma_region { - struct ps3_system_bus_device *dev; - /* device variables */ - const struct ps3_dma_region_ops *region_ops; - unsigned char ioid; - enum ps3_dma_page_size page_size; - enum ps3_dma_region_type region_type; - unsigned long len; - unsigned long offset; - - /* driver variables (set by ps3_dma_region_create) */ - unsigned long bus_addr; - struct { - spinlock_t lock; - struct list_head head; - } chunk_list; -}; - -struct ps3_dma_region_ops { - int (*create)(struct ps3_dma_region *); - int (*free)(struct ps3_dma_region *); - int (*map)(struct ps3_dma_region *, - unsigned long virt_addr, - unsigned long len, - unsigned long *bus_addr, - u64 iopte_pp); - int (*unmap)(struct ps3_dma_region *, - unsigned long bus_addr, - unsigned long len); -}; -/** - * struct ps3_dma_region_init - Helper to initialize structure variables - * - * Helper to properly initialize variables prior to calling - * ps3_system_bus_device_register. - */ - -struct ps3_system_bus_device; - -int ps3_dma_region_init(struct ps3_system_bus_device *dev, - struct ps3_dma_region *r, enum ps3_dma_page_size page_size, - enum ps3_dma_region_type region_type, void *addr, unsigned long len); -int ps3_dma_region_create(struct ps3_dma_region *r); -int ps3_dma_region_free(struct ps3_dma_region *r); -int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr, - unsigned long len, unsigned long *bus_addr, - u64 iopte_pp); -int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr, - unsigned long len); - -/* mmio routines */ - -enum ps3_mmio_page_size { - PS3_MMIO_4K = 12U, - PS3_MMIO_64K = 16U -}; - -struct ps3_mmio_region_ops; -/** - * struct ps3_mmio_region - a per device mmio state variables structure - * - * Current systems can be supported with a single region per device. - */ - -struct ps3_mmio_region { - struct ps3_system_bus_device *dev; - const struct ps3_mmio_region_ops *mmio_ops; - unsigned long bus_addr; - unsigned long len; - enum ps3_mmio_page_size page_size; - unsigned long lpar_addr; -}; - -struct ps3_mmio_region_ops { - int (*create)(struct ps3_mmio_region *); - int (*free)(struct ps3_mmio_region *); -}; -/** - * struct ps3_mmio_region_init - Helper to initialize structure variables - * - * Helper to properly initialize variables prior to calling - * ps3_system_bus_device_register. - */ - -int ps3_mmio_region_init(struct ps3_system_bus_device *dev, - struct ps3_mmio_region *r, unsigned long bus_addr, unsigned long len, - enum ps3_mmio_page_size page_size); -int ps3_mmio_region_create(struct ps3_mmio_region *r); -int ps3_free_mmio_region(struct ps3_mmio_region *r); -unsigned long ps3_mm_phys_to_lpar(unsigned long phys_addr); - -/* inrerrupt routines */ - -enum ps3_cpu_binding { - PS3_BINDING_CPU_ANY = -1, - PS3_BINDING_CPU_0 = 0, - PS3_BINDING_CPU_1 = 1, -}; - -int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet, - unsigned int *virq); -int ps3_irq_plug_destroy(unsigned int virq); -int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq); -int ps3_event_receive_port_destroy(unsigned int virq); -int ps3_send_event_locally(unsigned int virq); - -int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id, - unsigned int *virq); -int ps3_io_irq_destroy(unsigned int virq); -int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp, - unsigned int *virq); -int ps3_vuart_irq_destroy(unsigned int virq); -int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id, - unsigned int class, unsigned int *virq); -int ps3_spe_irq_destroy(unsigned int virq); - -int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev, - enum ps3_cpu_binding cpu, unsigned int *virq); -int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev, - unsigned int virq); - -/* lv1 result codes */ - -enum lv1_result { - LV1_SUCCESS = 0, - /* not used -1 */ - LV1_RESOURCE_SHORTAGE = -2, - LV1_NO_PRIVILEGE = -3, - LV1_DENIED_BY_POLICY = -4, - LV1_ACCESS_VIOLATION = -5, - LV1_NO_ENTRY = -6, - LV1_DUPLICATE_ENTRY = -7, - LV1_TYPE_MISMATCH = -8, - LV1_BUSY = -9, - LV1_EMPTY = -10, - LV1_WRONG_STATE = -11, - /* not used -12 */ - LV1_NO_MATCH = -13, - LV1_ALREADY_CONNECTED = -14, - LV1_UNSUPPORTED_PARAMETER_VALUE = -15, - LV1_CONDITION_NOT_SATISFIED = -16, - LV1_ILLEGAL_PARAMETER_VALUE = -17, - LV1_BAD_OPTION = -18, - LV1_IMPLEMENTATION_LIMITATION = -19, - LV1_NOT_IMPLEMENTED = -20, - LV1_INVALID_CLASS_ID = -21, - LV1_CONSTRAINT_NOT_SATISFIED = -22, - LV1_ALIGNMENT_ERROR = -23, - LV1_HARDWARE_ERROR = -24, - LV1_INVALID_DATA_FORMAT = -25, - LV1_INVALID_OPERATION = -26, - LV1_INTERNAL_ERROR = -32768, -}; - -static inline const char* ps3_result(int result) -{ -#if defined(DEBUG) - switch (result) { - case LV1_SUCCESS: - return "LV1_SUCCESS (0)"; - case -1: - return "** unknown result ** (-1)"; - case LV1_RESOURCE_SHORTAGE: - return "LV1_RESOURCE_SHORTAGE (-2)"; - case LV1_NO_PRIVILEGE: - return "LV1_NO_PRIVILEGE (-3)"; - case LV1_DENIED_BY_POLICY: - return "LV1_DENIED_BY_POLICY (-4)"; - case LV1_ACCESS_VIOLATION: - return "LV1_ACCESS_VIOLATION (-5)"; - case LV1_NO_ENTRY: - return "LV1_NO_ENTRY (-6)"; - case LV1_DUPLICATE_ENTRY: - return "LV1_DUPLICATE_ENTRY (-7)"; - case LV1_TYPE_MISMATCH: - return "LV1_TYPE_MISMATCH (-8)"; - case LV1_BUSY: - return "LV1_BUSY (-9)"; - case LV1_EMPTY: - return "LV1_EMPTY (-10)"; - case LV1_WRONG_STATE: - return "LV1_WRONG_STATE (-11)"; - case -12: - return "** unknown result ** (-12)"; - case LV1_NO_MATCH: - return "LV1_NO_MATCH (-13)"; - case LV1_ALREADY_CONNECTED: - return "LV1_ALREADY_CONNECTED (-14)"; - case LV1_UNSUPPORTED_PARAMETER_VALUE: - return "LV1_UNSUPPORTED_PARAMETER_VALUE (-15)"; - case LV1_CONDITION_NOT_SATISFIED: - return "LV1_CONDITION_NOT_SATISFIED (-16)"; - case LV1_ILLEGAL_PARAMETER_VALUE: - return "LV1_ILLEGAL_PARAMETER_VALUE (-17)"; - case LV1_BAD_OPTION: - return "LV1_BAD_OPTION (-18)"; - case LV1_IMPLEMENTATION_LIMITATION: - return "LV1_IMPLEMENTATION_LIMITATION (-19)"; - case LV1_NOT_IMPLEMENTED: - return "LV1_NOT_IMPLEMENTED (-20)"; - case LV1_INVALID_CLASS_ID: - return "LV1_INVALID_CLASS_ID (-21)"; - case LV1_CONSTRAINT_NOT_SATISFIED: - return "LV1_CONSTRAINT_NOT_SATISFIED (-22)"; - case LV1_ALIGNMENT_ERROR: - return "LV1_ALIGNMENT_ERROR (-23)"; - case LV1_HARDWARE_ERROR: - return "LV1_HARDWARE_ERROR (-24)"; - case LV1_INVALID_DATA_FORMAT: - return "LV1_INVALID_DATA_FORMAT (-25)"; - case LV1_INVALID_OPERATION: - return "LV1_INVALID_OPERATION (-26)"; - case LV1_INTERNAL_ERROR: - return "LV1_INTERNAL_ERROR (-32768)"; - default: - BUG(); - return "** unknown result **"; - }; -#else - return ""; -#endif -} - -/* system bus routines */ - -enum ps3_match_id { - PS3_MATCH_ID_EHCI = 1, - PS3_MATCH_ID_OHCI = 2, - PS3_MATCH_ID_GELIC = 3, - PS3_MATCH_ID_AV_SETTINGS = 4, - PS3_MATCH_ID_SYSTEM_MANAGER = 5, - PS3_MATCH_ID_STOR_DISK = 6, - PS3_MATCH_ID_STOR_ROM = 7, - PS3_MATCH_ID_STOR_FLASH = 8, - PS3_MATCH_ID_SOUND = 9, - PS3_MATCH_ID_GRAPHICS = 10, - PS3_MATCH_ID_LPM = 11, -}; - -#define PS3_MODULE_ALIAS_EHCI "ps3:1" -#define PS3_MODULE_ALIAS_OHCI "ps3:2" -#define PS3_MODULE_ALIAS_GELIC "ps3:3" -#define PS3_MODULE_ALIAS_AV_SETTINGS "ps3:4" -#define PS3_MODULE_ALIAS_SYSTEM_MANAGER "ps3:5" -#define PS3_MODULE_ALIAS_STOR_DISK "ps3:6" -#define PS3_MODULE_ALIAS_STOR_ROM "ps3:7" -#define PS3_MODULE_ALIAS_STOR_FLASH "ps3:8" -#define PS3_MODULE_ALIAS_SOUND "ps3:9" -#define PS3_MODULE_ALIAS_GRAPHICS "ps3:10" -#define PS3_MODULE_ALIAS_LPM "ps3:11" - -enum ps3_system_bus_device_type { - PS3_DEVICE_TYPE_IOC0 = 1, - PS3_DEVICE_TYPE_SB, - PS3_DEVICE_TYPE_VUART, - PS3_DEVICE_TYPE_LPM, -}; - -enum ps3_match_sub_id { - /* for PS3_MATCH_ID_GRAPHICS */ - PS3_MATCH_SUB_ID_FB = 1, -}; - -/** - * struct ps3_system_bus_device - a device on the system bus - */ - -struct ps3_system_bus_device { - enum ps3_match_id match_id; - enum ps3_match_sub_id match_sub_id; - enum ps3_system_bus_device_type dev_type; - - u64 bus_id; /* SB */ - u64 dev_id; /* SB */ - unsigned int interrupt_id; /* SB */ - struct ps3_dma_region *d_region; /* SB, IOC0 */ - struct ps3_mmio_region *m_region; /* SB, IOC0*/ - unsigned int port_number; /* VUART */ - struct { /* LPM */ - u64 node_id; - u64 pu_id; - u64 rights; - } lpm; - -/* struct iommu_table *iommu_table; -- waiting for BenH's cleanups */ - struct device core; - void *driver_priv; /* private driver variables */ -}; - -int ps3_open_hv_device(struct ps3_system_bus_device *dev); -int ps3_close_hv_device(struct ps3_system_bus_device *dev); - -/** - * struct ps3_system_bus_driver - a driver for a device on the system bus - */ - -struct ps3_system_bus_driver { - enum ps3_match_id match_id; - enum ps3_match_sub_id match_sub_id; - struct device_driver core; - int (*probe)(struct ps3_system_bus_device *); - int (*remove)(struct ps3_system_bus_device *); - int (*shutdown)(struct ps3_system_bus_device *); -/* int (*suspend)(struct ps3_system_bus_device *, pm_message_t); */ -/* int (*resume)(struct ps3_system_bus_device *); */ -}; - -int ps3_system_bus_device_register(struct ps3_system_bus_device *dev); -int ps3_system_bus_driver_register(struct ps3_system_bus_driver *drv); -void ps3_system_bus_driver_unregister(struct ps3_system_bus_driver *drv); - -static inline struct ps3_system_bus_driver *ps3_drv_to_system_bus_drv( - struct device_driver *_drv) -{ - return container_of(_drv, struct ps3_system_bus_driver, core); -} -static inline struct ps3_system_bus_device *ps3_dev_to_system_bus_dev( - struct device *_dev) -{ - return container_of(_dev, struct ps3_system_bus_device, core); -} -static inline struct ps3_system_bus_driver * - ps3_system_bus_dev_to_system_bus_drv(struct ps3_system_bus_device *_dev) -{ - BUG_ON(!_dev); - BUG_ON(!_dev->core.driver); - return ps3_drv_to_system_bus_drv(_dev->core.driver); -} - -/** - * ps3_system_bus_set_drvdata - - * @dev: device structure - * @data: Data to set - */ - -static inline void ps3_system_bus_set_driver_data( - struct ps3_system_bus_device *dev, void *data) -{ - dev->core.driver_data = data; -} -static inline void *ps3_system_bus_get_driver_data( - struct ps3_system_bus_device *dev) -{ - return dev->core.driver_data; -} - -/* These two need global scope for get_dma_ops(). */ - -extern struct bus_type ps3_system_bus_type; - -/* system manager */ - -struct ps3_sys_manager_ops { - struct ps3_system_bus_device *dev; - void (*power_off)(struct ps3_system_bus_device *dev); - void (*restart)(struct ps3_system_bus_device *dev); -}; - -void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops); -void __noreturn ps3_sys_manager_power_off(void); -void __noreturn ps3_sys_manager_restart(void); -void __noreturn ps3_sys_manager_halt(void); -int ps3_sys_manager_get_wol(void); -void ps3_sys_manager_set_wol(int state); - -struct ps3_prealloc { - const char *name; - void *address; - unsigned long size; - unsigned long align; -}; - -extern struct ps3_prealloc ps3fb_videomemory; -extern struct ps3_prealloc ps3flash_bounce_buffer; - -/* logical performance monitor */ - -/** - * enum ps3_lpm_rights - Rigths granted by the system policy module. - * - * @PS3_LPM_RIGHTS_USE_LPM: The right to use the lpm. - * @PS3_LPM_RIGHTS_USE_TB: The right to use the internal trace buffer. - */ - -enum ps3_lpm_rights { - PS3_LPM_RIGHTS_USE_LPM = 0x001, - PS3_LPM_RIGHTS_USE_TB = 0x100, -}; - -/** - * enum ps3_lpm_tb_type - Type of trace buffer lv1 should use. - * - * @PS3_LPM_TB_TYPE_NONE: Do not use a trace buffer. - * @PS3_LPM_RIGHTS_USE_TB: Use the lv1 internal trace buffer. Must have - * rights @PS3_LPM_RIGHTS_USE_TB. - */ - -enum ps3_lpm_tb_type { - PS3_LPM_TB_TYPE_NONE = 0, - PS3_LPM_TB_TYPE_INTERNAL = 1, -}; - -int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache, - u64 tb_cache_size); -int ps3_lpm_close(void); -int ps3_lpm_copy_tb(unsigned long offset, void *buf, unsigned long count, - unsigned long *bytes_copied); -int ps3_lpm_copy_tb_to_user(unsigned long offset, void __user *buf, - unsigned long count, unsigned long *bytes_copied); -void ps3_set_bookmark(u64 bookmark); -void ps3_set_pm_bookmark(u64 tag, u64 incident, u64 th_id); -int ps3_set_signal(u64 rtas_signal_group, u8 signal_bit, u16 sub_unit, - u8 bus_word); - -u32 ps3_read_phys_ctr(u32 cpu, u32 phys_ctr); -void ps3_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val); -u32 ps3_read_ctr(u32 cpu, u32 ctr); -void ps3_write_ctr(u32 cpu, u32 ctr, u32 val); - -u32 ps3_read_pm07_control(u32 cpu, u32 ctr); -void ps3_write_pm07_control(u32 cpu, u32 ctr, u32 val); -u32 ps3_read_pm(u32 cpu, enum pm_reg_name reg); -void ps3_write_pm(u32 cpu, enum pm_reg_name reg, u32 val); - -u32 ps3_get_ctr_size(u32 cpu, u32 phys_ctr); -void ps3_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size); - -void ps3_enable_pm(u32 cpu); -void ps3_disable_pm(u32 cpu); -void ps3_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); -void ps3_disable_pm_interrupts(u32 cpu); - -u32 ps3_get_and_clear_pm_interrupts(u32 cpu); -void ps3_sync_irq(int node); -u32 ps3_get_hw_thread_id(int cpu); -u64 ps3_get_spe_id(void *arg); - -#endif diff --git a/include/asm-powerpc/ps3av.h b/include/asm-powerpc/ps3av.h deleted file mode 100644 index fda98715cd35..000000000000 --- a/include/asm-powerpc/ps3av.h +++ /dev/null @@ -1,744 +0,0 @@ -/* - * PS3 AV backend support. - * - * Copyright (C) 2007 Sony Computer Entertainment Inc. - * Copyright 2007 Sony Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ASM_POWERPC_PS3AV_H_ -#define _ASM_POWERPC_PS3AV_H_ - -/** command for ioctl() **/ -#define PS3AV_VERSION 0x205 /* version of ps3av command */ - -#define PS3AV_CID_AV_INIT 0x00000001 -#define PS3AV_CID_AV_FIN 0x00000002 -#define PS3AV_CID_AV_GET_HW_CONF 0x00000003 -#define PS3AV_CID_AV_GET_MONITOR_INFO 0x00000004 -#define PS3AV_CID_AV_ENABLE_EVENT 0x00000006 -#define PS3AV_CID_AV_DISABLE_EVENT 0x00000007 -#define PS3AV_CID_AV_TV_MUTE 0x0000000a - -#define PS3AV_CID_AV_VIDEO_CS 0x00010001 -#define PS3AV_CID_AV_VIDEO_MUTE 0x00010002 -#define PS3AV_CID_AV_VIDEO_DISABLE_SIG 0x00010003 -#define PS3AV_CID_AV_AUDIO_PARAM 0x00020001 -#define PS3AV_CID_AV_AUDIO_MUTE 0x00020002 -#define PS3AV_CID_AV_HDMI_MODE 0x00040001 - -#define PS3AV_CID_VIDEO_INIT 0x01000001 -#define PS3AV_CID_VIDEO_MODE 0x01000002 -#define PS3AV_CID_VIDEO_FORMAT 0x01000004 -#define PS3AV_CID_VIDEO_PITCH 0x01000005 - -#define PS3AV_CID_AUDIO_INIT 0x02000001 -#define PS3AV_CID_AUDIO_MODE 0x02000002 -#define PS3AV_CID_AUDIO_MUTE 0x02000003 -#define PS3AV_CID_AUDIO_ACTIVE 0x02000004 -#define PS3AV_CID_AUDIO_INACTIVE 0x02000005 -#define PS3AV_CID_AUDIO_SPDIF_BIT 0x02000006 -#define PS3AV_CID_AUDIO_CTRL 0x02000007 - -#define PS3AV_CID_EVENT_UNPLUGGED 0x10000001 -#define PS3AV_CID_EVENT_PLUGGED 0x10000002 -#define PS3AV_CID_EVENT_HDCP_DONE 0x10000003 -#define PS3AV_CID_EVENT_HDCP_FAIL 0x10000004 -#define PS3AV_CID_EVENT_HDCP_AUTH 0x10000005 -#define PS3AV_CID_EVENT_HDCP_ERROR 0x10000006 - -#define PS3AV_CID_AVB_PARAM 0x04000001 - -/* max backend ports */ -#define PS3AV_HDMI_MAX 2 /* HDMI_0 HDMI_1 */ -#define PS3AV_AVMULTI_MAX 1 /* AVMULTI_0 */ -#define PS3AV_AV_PORT_MAX (PS3AV_HDMI_MAX + PS3AV_AVMULTI_MAX) -#define PS3AV_OPT_PORT_MAX 1 /* SPDIF0 */ -#define PS3AV_HEAD_MAX 2 /* HEAD_A HEAD_B */ - -/* num of pkt for PS3AV_CID_AVB_PARAM */ -#define PS3AV_AVB_NUM_VIDEO PS3AV_HEAD_MAX -#define PS3AV_AVB_NUM_AUDIO 0 /* not supported */ -#define PS3AV_AVB_NUM_AV_VIDEO PS3AV_AV_PORT_MAX -#define PS3AV_AVB_NUM_AV_AUDIO PS3AV_HDMI_MAX - -#define PS3AV_MUTE_PORT_MAX 1 /* num of ports in mute pkt */ - -/* event_bit */ -#define PS3AV_CMD_EVENT_BIT_UNPLUGGED (1 << 0) -#define PS3AV_CMD_EVENT_BIT_PLUGGED (1 << 1) -#define PS3AV_CMD_EVENT_BIT_HDCP_DONE (1 << 2) -#define PS3AV_CMD_EVENT_BIT_HDCP_FAIL (1 << 3) -#define PS3AV_CMD_EVENT_BIT_HDCP_REAUTH (1 << 4) -#define PS3AV_CMD_EVENT_BIT_HDCP_TOPOLOGY (1 << 5) - -/* common params */ -/* mute */ -#define PS3AV_CMD_MUTE_OFF 0x0000 -#define PS3AV_CMD_MUTE_ON 0x0001 -/* avport */ -#define PS3AV_CMD_AVPORT_HDMI_0 0x0000 -#define PS3AV_CMD_AVPORT_HDMI_1 0x0001 -#define PS3AV_CMD_AVPORT_AVMULTI_0 0x0010 -#define PS3AV_CMD_AVPORT_SPDIF_0 0x0020 -#define PS3AV_CMD_AVPORT_SPDIF_1 0x0021 - -/* for av backend */ -/* av_mclk */ -#define PS3AV_CMD_AV_MCLK_128 0x0000 -#define PS3AV_CMD_AV_MCLK_256 0x0001 -#define PS3AV_CMD_AV_MCLK_512 0x0003 -/* av_inputlen */ -#define PS3AV_CMD_AV_INPUTLEN_16 0x02 -#define PS3AV_CMD_AV_INPUTLEN_20 0x0a -#define PS3AV_CMD_AV_INPUTLEN_24 0x0b -/* alayout */ -#define PS3AV_CMD_AV_LAYOUT_32 (1 << 0) -#define PS3AV_CMD_AV_LAYOUT_44 (1 << 1) -#define PS3AV_CMD_AV_LAYOUT_48 (1 << 2) -#define PS3AV_CMD_AV_LAYOUT_88 (1 << 3) -#define PS3AV_CMD_AV_LAYOUT_96 (1 << 4) -#define PS3AV_CMD_AV_LAYOUT_176 (1 << 5) -#define PS3AV_CMD_AV_LAYOUT_192 (1 << 6) -/* hdmi_mode */ -#define PS3AV_CMD_AV_HDMI_MODE_NORMAL 0xff -#define PS3AV_CMD_AV_HDMI_HDCP_OFF 0x01 -#define PS3AV_CMD_AV_HDMI_EDID_PASS 0x80 -#define PS3AV_CMD_AV_HDMI_DVI 0x40 - -/* for video module */ -/* video_head */ -#define PS3AV_CMD_VIDEO_HEAD_A 0x0000 -#define PS3AV_CMD_VIDEO_HEAD_B 0x0001 -/* video_cs_out video_cs_in */ -#define PS3AV_CMD_VIDEO_CS_NONE 0x0000 -#define PS3AV_CMD_VIDEO_CS_RGB_8 0x0001 -#define PS3AV_CMD_VIDEO_CS_YUV444_8 0x0002 -#define PS3AV_CMD_VIDEO_CS_YUV422_8 0x0003 -#define PS3AV_CMD_VIDEO_CS_XVYCC_8 0x0004 -#define PS3AV_CMD_VIDEO_CS_RGB_10 0x0005 -#define PS3AV_CMD_VIDEO_CS_YUV444_10 0x0006 -#define PS3AV_CMD_VIDEO_CS_YUV422_10 0x0007 -#define PS3AV_CMD_VIDEO_CS_XVYCC_10 0x0008 -#define PS3AV_CMD_VIDEO_CS_RGB_12 0x0009 -#define PS3AV_CMD_VIDEO_CS_YUV444_12 0x000a -#define PS3AV_CMD_VIDEO_CS_YUV422_12 0x000b -#define PS3AV_CMD_VIDEO_CS_XVYCC_12 0x000c -/* video_vid */ -#define PS3AV_CMD_VIDEO_VID_NONE 0x0000 -#define PS3AV_CMD_VIDEO_VID_480I 0x0001 -#define PS3AV_CMD_VIDEO_VID_576I 0x0003 -#define PS3AV_CMD_VIDEO_VID_480P 0x0005 -#define PS3AV_CMD_VIDEO_VID_576P 0x0006 -#define PS3AV_CMD_VIDEO_VID_1080I_60HZ 0x0007 -#define PS3AV_CMD_VIDEO_VID_1080I_50HZ 0x0008 -#define PS3AV_CMD_VIDEO_VID_720P_60HZ 0x0009 -#define PS3AV_CMD_VIDEO_VID_720P_50HZ 0x000a -#define PS3AV_CMD_VIDEO_VID_1080P_60HZ 0x000b -#define PS3AV_CMD_VIDEO_VID_1080P_50HZ 0x000c -#define PS3AV_CMD_VIDEO_VID_WXGA 0x000d -#define PS3AV_CMD_VIDEO_VID_SXGA 0x000e -#define PS3AV_CMD_VIDEO_VID_WUXGA 0x000f -#define PS3AV_CMD_VIDEO_VID_480I_A 0x0010 -/* video_format */ -#define PS3AV_CMD_VIDEO_FORMAT_BLACK 0x0000 -#define PS3AV_CMD_VIDEO_FORMAT_ARGB_8BIT 0x0007 -/* video_order */ -#define PS3AV_CMD_VIDEO_ORDER_RGB 0x0000 -#define PS3AV_CMD_VIDEO_ORDER_BGR 0x0001 -/* video_fmt */ -#define PS3AV_CMD_VIDEO_FMT_X8R8G8B8 0x0000 -/* video_out_format */ -#define PS3AV_CMD_VIDEO_OUT_FORMAT_RGB_12BIT 0x0000 -/* video_cl_cnv */ -#define PS3AV_CMD_VIDEO_CL_CNV_ENABLE_LUT 0x0000 -#define PS3AV_CMD_VIDEO_CL_CNV_DISABLE_LUT 0x0010 -/* video_sync */ -#define PS3AV_CMD_VIDEO_SYNC_VSYNC 0x0001 -#define PS3AV_CMD_VIDEO_SYNC_CSYNC 0x0004 -#define PS3AV_CMD_VIDEO_SYNC_HSYNC 0x0010 - -/* for audio module */ -/* num_of_ch */ -#define PS3AV_CMD_AUDIO_NUM_OF_CH_2 0x0000 -#define PS3AV_CMD_AUDIO_NUM_OF_CH_3 0x0001 -#define PS3AV_CMD_AUDIO_NUM_OF_CH_4 0x0002 -#define PS3AV_CMD_AUDIO_NUM_OF_CH_5 0x0003 -#define PS3AV_CMD_AUDIO_NUM_OF_CH_6 0x0004 -#define PS3AV_CMD_AUDIO_NUM_OF_CH_7 0x0005 -#define PS3AV_CMD_AUDIO_NUM_OF_CH_8 0x0006 -/* audio_fs */ -#define PS3AV_CMD_AUDIO_FS_32K 0x0001 -#define PS3AV_CMD_AUDIO_FS_44K 0x0002 -#define PS3AV_CMD_AUDIO_FS_48K 0x0003 -#define PS3AV_CMD_AUDIO_FS_88K 0x0004 -#define PS3AV_CMD_AUDIO_FS_96K 0x0005 -#define PS3AV_CMD_AUDIO_FS_176K 0x0006 -#define PS3AV_CMD_AUDIO_FS_192K 0x0007 -/* audio_word_bits */ -#define PS3AV_CMD_AUDIO_WORD_BITS_16 0x0001 -#define PS3AV_CMD_AUDIO_WORD_BITS_20 0x0002 -#define PS3AV_CMD_AUDIO_WORD_BITS_24 0x0003 -/* audio_format */ -#define PS3AV_CMD_AUDIO_FORMAT_PCM 0x0001 -#define PS3AV_CMD_AUDIO_FORMAT_BITSTREAM 0x00ff -/* audio_source */ -#define PS3AV_CMD_AUDIO_SOURCE_SERIAL 0x0000 -#define PS3AV_CMD_AUDIO_SOURCE_SPDIF 0x0001 -/* audio_swap */ -#define PS3AV_CMD_AUDIO_SWAP_0 0x0000 -#define PS3AV_CMD_AUDIO_SWAP_1 0x0000 -/* audio_map */ -#define PS3AV_CMD_AUDIO_MAP_OUTPUT_0 0x0000 -#define PS3AV_CMD_AUDIO_MAP_OUTPUT_1 0x0001 -#define PS3AV_CMD_AUDIO_MAP_OUTPUT_2 0x0002 -#define PS3AV_CMD_AUDIO_MAP_OUTPUT_3 0x0003 -/* audio_layout */ -#define PS3AV_CMD_AUDIO_LAYOUT_2CH 0x0000 -#define PS3AV_CMD_AUDIO_LAYOUT_6CH 0x000b /* LREClr */ -#define PS3AV_CMD_AUDIO_LAYOUT_8CH 0x001f /* LREClrXY */ -/* audio_downmix */ -#define PS3AV_CMD_AUDIO_DOWNMIX_PERMITTED 0x0000 -#define PS3AV_CMD_AUDIO_DOWNMIX_PROHIBITED 0x0001 - -/* audio_port */ -#define PS3AV_CMD_AUDIO_PORT_HDMI_0 ( 1 << 0 ) -#define PS3AV_CMD_AUDIO_PORT_HDMI_1 ( 1 << 1 ) -#define PS3AV_CMD_AUDIO_PORT_AVMULTI_0 ( 1 << 10 ) -#define PS3AV_CMD_AUDIO_PORT_SPDIF_0 ( 1 << 20 ) -#define PS3AV_CMD_AUDIO_PORT_SPDIF_1 ( 1 << 21 ) - -/* audio_ctrl_id */ -#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_RESET 0x0000 -#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_DE_EMPHASIS 0x0001 -#define PS3AV_CMD_AUDIO_CTRL_ID_AVCLK 0x0002 -/* audio_ctrl_data[0] reset */ -#define PS3AV_CMD_AUDIO_CTRL_RESET_NEGATE 0x0000 -#define PS3AV_CMD_AUDIO_CTRL_RESET_ASSERT 0x0001 -/* audio_ctrl_data[0] de-emphasis */ -#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_OFF 0x0000 -#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_ON 0x0001 -/* audio_ctrl_data[0] avclk */ -#define PS3AV_CMD_AUDIO_CTRL_AVCLK_22 0x0000 -#define PS3AV_CMD_AUDIO_CTRL_AVCLK_18 0x0001 - -/* av_vid */ -/* do not use these params directly, use vid_video2av */ -#define PS3AV_CMD_AV_VID_480I 0x0000 -#define PS3AV_CMD_AV_VID_480P 0x0001 -#define PS3AV_CMD_AV_VID_720P_60HZ 0x0002 -#define PS3AV_CMD_AV_VID_1080I_60HZ 0x0003 -#define PS3AV_CMD_AV_VID_1080P_60HZ 0x0004 -#define PS3AV_CMD_AV_VID_576I 0x0005 -#define PS3AV_CMD_AV_VID_576P 0x0006 -#define PS3AV_CMD_AV_VID_720P_50HZ 0x0007 -#define PS3AV_CMD_AV_VID_1080I_50HZ 0x0008 -#define PS3AV_CMD_AV_VID_1080P_50HZ 0x0009 -#define PS3AV_CMD_AV_VID_WXGA 0x000a -#define PS3AV_CMD_AV_VID_SXGA 0x000b -#define PS3AV_CMD_AV_VID_WUXGA 0x000c -/* av_cs_out av_cs_in */ -/* use cs_video2av() */ -#define PS3AV_CMD_AV_CS_RGB_8 0x0000 -#define PS3AV_CMD_AV_CS_YUV444_8 0x0001 -#define PS3AV_CMD_AV_CS_YUV422_8 0x0002 -#define PS3AV_CMD_AV_CS_XVYCC_8 0x0003 -#define PS3AV_CMD_AV_CS_RGB_10 0x0004 -#define PS3AV_CMD_AV_CS_YUV444_10 0x0005 -#define PS3AV_CMD_AV_CS_YUV422_10 0x0006 -#define PS3AV_CMD_AV_CS_XVYCC_10 0x0007 -#define PS3AV_CMD_AV_CS_RGB_12 0x0008 -#define PS3AV_CMD_AV_CS_YUV444_12 0x0009 -#define PS3AV_CMD_AV_CS_YUV422_12 0x000a -#define PS3AV_CMD_AV_CS_XVYCC_12 0x000b -#define PS3AV_CMD_AV_CS_8 0x0000 -#define PS3AV_CMD_AV_CS_10 0x0001 -#define PS3AV_CMD_AV_CS_12 0x0002 -/* dither */ -#define PS3AV_CMD_AV_DITHER_OFF 0x0000 -#define PS3AV_CMD_AV_DITHER_ON 0x0001 -#define PS3AV_CMD_AV_DITHER_8BIT 0x0000 -#define PS3AV_CMD_AV_DITHER_10BIT 0x0002 -#define PS3AV_CMD_AV_DITHER_12BIT 0x0004 -/* super_white */ -#define PS3AV_CMD_AV_SUPER_WHITE_OFF 0x0000 -#define PS3AV_CMD_AV_SUPER_WHITE_ON 0x0001 -/* aspect */ -#define PS3AV_CMD_AV_ASPECT_16_9 0x0000 -#define PS3AV_CMD_AV_ASPECT_4_3 0x0001 -/* video_cs_cnv() */ -#define PS3AV_CMD_VIDEO_CS_RGB 0x0001 -#define PS3AV_CMD_VIDEO_CS_YUV422 0x0002 -#define PS3AV_CMD_VIDEO_CS_YUV444 0x0003 - -/* for broadcast automode */ -#define PS3AV_RESBIT_720x480P 0x0003 /* 0x0001 | 0x0002 */ -#define PS3AV_RESBIT_720x576P 0x0003 /* 0x0001 | 0x0002 */ -#define PS3AV_RESBIT_1280x720P 0x0004 -#define PS3AV_RESBIT_1920x1080I 0x0008 -#define PS3AV_RESBIT_1920x1080P 0x4000 -#define PS3AV_RES_MASK_60 (PS3AV_RESBIT_720x480P \ - | PS3AV_RESBIT_1280x720P \ - | PS3AV_RESBIT_1920x1080I \ - | PS3AV_RESBIT_1920x1080P) -#define PS3AV_RES_MASK_50 (PS3AV_RESBIT_720x576P \ - | PS3AV_RESBIT_1280x720P \ - | PS3AV_RESBIT_1920x1080I \ - | PS3AV_RESBIT_1920x1080P) - -/* for VESA automode */ -#define PS3AV_RESBIT_VGA 0x0001 -#define PS3AV_RESBIT_WXGA 0x0002 -#define PS3AV_RESBIT_SXGA 0x0004 -#define PS3AV_RESBIT_WUXGA 0x0008 -#define PS3AV_RES_MASK_VESA (PS3AV_RESBIT_WXGA |\ - PS3AV_RESBIT_SXGA |\ - PS3AV_RESBIT_WUXGA) - -#define PS3AV_MONITOR_TYPE_HDMI 1 /* HDMI */ -#define PS3AV_MONITOR_TYPE_DVI 2 /* DVI */ - - -/* for video mode */ -enum ps3av_mode_num { - PS3AV_MODE_AUTO = 0, - PS3AV_MODE_480I = 1, - PS3AV_MODE_480P = 2, - PS3AV_MODE_720P60 = 3, - PS3AV_MODE_1080I60 = 4, - PS3AV_MODE_1080P60 = 5, - PS3AV_MODE_576I = 6, - PS3AV_MODE_576P = 7, - PS3AV_MODE_720P50 = 8, - PS3AV_MODE_1080I50 = 9, - PS3AV_MODE_1080P50 = 10, - PS3AV_MODE_WXGA = 11, - PS3AV_MODE_SXGA = 12, - PS3AV_MODE_WUXGA = 13, -}; - -#define PS3AV_MODE_MASK 0x000F -#define PS3AV_MODE_HDCP_OFF 0x1000 /* Retail PS3 product doesn't support this */ -#define PS3AV_MODE_DITHER 0x0800 -#define PS3AV_MODE_COLOR 0x0400 -#define PS3AV_MODE_WHITE 0x0200 -#define PS3AV_MODE_FULL 0x0080 -#define PS3AV_MODE_DVI 0x0040 -#define PS3AV_MODE_RGB 0x0020 - - -#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_60 PS3AV_MODE_480P -#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_60 PS3AV_MODE_480I -#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_50 PS3AV_MODE_576P -#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_50 PS3AV_MODE_576I - -#define PS3AV_REGION_60 0x01 -#define PS3AV_REGION_50 0x02 -#define PS3AV_REGION_RGB 0x10 - -#define get_status(buf) (((__u32 *)buf)[2]) -#define PS3AV_HDR_SIZE 4 /* version + size */ - - -/** command packet structure **/ -struct ps3av_send_hdr { - u16 version; - u16 size; /* size of command packet */ - u32 cid; /* command id */ -}; - -struct ps3av_reply_hdr { - u16 version; - u16 size; - u32 cid; - u32 status; -}; - -/* backend: initialization */ -struct ps3av_pkt_av_init { - struct ps3av_send_hdr send_hdr; - u32 event_bit; -}; - -/* backend: finalize */ -struct ps3av_pkt_av_fin { - struct ps3av_send_hdr send_hdr; - /* recv */ - u32 reserved; -}; - -/* backend: get port */ -struct ps3av_pkt_av_get_hw_conf { - struct ps3av_send_hdr send_hdr; - /* recv */ - u32 status; - u16 num_of_hdmi; /* out: number of hdmi */ - u16 num_of_avmulti; /* out: number of avmulti */ - u16 num_of_spdif; /* out: number of hdmi */ - u16 reserved; -}; - -/* backend: get monitor info */ -struct ps3av_info_resolution { - u32 res_bits; - u32 native; -}; - -struct ps3av_info_cs { - u8 rgb; - u8 yuv444; - u8 yuv422; - u8 reserved; -}; - -struct ps3av_info_color { - u16 red_x; - u16 red_y; - u16 green_x; - u16 green_y; - u16 blue_x; - u16 blue_y; - u16 white_x; - u16 white_y; - u32 gamma; -}; - -struct ps3av_info_audio { - u8 type; - u8 max_num_of_ch; - u8 fs; - u8 sbit; -}; - -struct ps3av_info_monitor { - u8 avport; - u8 monitor_id[10]; - u8 monitor_type; - u8 monitor_name[16]; - struct ps3av_info_resolution res_60; - struct ps3av_info_resolution res_50; - struct ps3av_info_resolution res_other; - struct ps3av_info_resolution res_vesa; - struct ps3av_info_cs cs; - struct ps3av_info_color color; - u8 supported_ai; - u8 speaker_info; - u8 num_of_audio_block; - struct ps3av_info_audio audio[0]; /* 0 or more audio blocks */ - u8 reserved[169]; -} __attribute__ ((packed)); - -struct ps3av_pkt_av_get_monitor_info { - struct ps3av_send_hdr send_hdr; - u16 avport; /* in: avport */ - u16 reserved; - /* recv */ - struct ps3av_info_monitor info; /* out: monitor info */ -}; - -/* backend: enable/disable event */ -struct ps3av_pkt_av_event { - struct ps3av_send_hdr send_hdr; - u32 event_bit; /* in */ -}; - -/* backend: video cs param */ -struct ps3av_pkt_av_video_cs { - struct ps3av_send_hdr send_hdr; - u16 avport; /* in: avport */ - u16 av_vid; /* in: video resolution */ - u16 av_cs_out; /* in: output color space */ - u16 av_cs_in; /* in: input color space */ - u8 dither; /* in: dither bit length */ - u8 bitlen_out; /* in: bit length */ - u8 super_white; /* in: super white */ - u8 aspect; /* in: aspect ratio */ -}; - -/* backend: video mute */ -struct ps3av_av_mute { - u16 avport; /* in: avport */ - u16 mute; /* in: mute on/off */ -}; - -struct ps3av_pkt_av_video_mute { - struct ps3av_send_hdr send_hdr; - struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX]; -}; - -/* backend: video disable signal */ -struct ps3av_pkt_av_video_disable_sig { - struct ps3av_send_hdr send_hdr; - u16 avport; /* in: avport */ - u16 reserved; -}; - -/* backend: audio param */ -struct ps3av_audio_info_frame { - struct pb1_bit { - u8 ct:4; - u8 rsv:1; - u8 cc:3; - } pb1; - struct pb2_bit { - u8 rsv:3; - u8 sf:3; - u8 ss:2; - } pb2; - u8 pb3; - u8 pb4; - struct pb5_bit { - u8 dm:1; - u8 lsv:4; - u8 rsv:3; - } pb5; -}; - -struct ps3av_pkt_av_audio_param { - struct ps3av_send_hdr send_hdr; - u16 avport; /* in: avport */ - u16 reserved; - u8 mclk; /* in: audio mclk */ - u8 ns[3]; /* in: audio ns val */ - u8 enable; /* in: audio enable */ - u8 swaplr; /* in: audio swap */ - u8 fifomap; /* in: audio fifomap */ - u8 inputctrl; /* in: audio input ctrl */ - u8 inputlen; /* in: sample bit size */ - u8 layout; /* in: speaker layout param */ - struct ps3av_audio_info_frame info; /* in: info */ - u8 chstat[5]; /* in: ch stat */ -}; - -/* backend: audio_mute */ -struct ps3av_pkt_av_audio_mute { - struct ps3av_send_hdr send_hdr; - struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX]; -}; - -/* backend: hdmi_mode */ -struct ps3av_pkt_av_hdmi_mode { - struct ps3av_send_hdr send_hdr; - u8 mode; /* in: hdmi_mode */ - u8 reserved0; - u8 reserved1; - u8 reserved2; -}; - -/* backend: tv_mute */ -struct ps3av_pkt_av_tv_mute { - struct ps3av_send_hdr send_hdr; - u16 avport; /* in: avport HDMI only */ - u16 mute; /* in: mute */ -}; - -/* video: initialize */ -struct ps3av_pkt_video_init { - struct ps3av_send_hdr send_hdr; - /* recv */ - u32 reserved; -}; - -/* video: mode setting */ -struct ps3av_pkt_video_mode { - struct ps3av_send_hdr send_hdr; - u32 video_head; /* in: head */ - u32 reserved; - u32 video_vid; /* in: video resolution */ - u16 reserved1; - u16 width; /* in: width in pixel */ - u16 reserved2; - u16 height; /* in: height in pixel */ - u32 pitch; /* in: line size in byte */ - u32 video_out_format; /* in: out format */ - u32 video_format; /* in: input frame buffer format */ - u8 reserved3; - u8 video_cl_cnv; /* in: color conversion */ - u16 video_order; /* in: input RGB order */ - u32 reserved4; -}; - -/* video: format */ -struct ps3av_pkt_video_format { - struct ps3av_send_hdr send_hdr; - u32 video_head; /* in: head */ - u32 video_format; /* in: frame buffer format */ - u8 reserved; - u8 video_cl_cnv; /* in: color conversion */ - u16 video_order; /* in: input RGB order */ -}; - -/* video: pitch */ -struct ps3av_pkt_video_pitch { - u16 version; - u16 size; /* size of command packet */ - u32 cid; /* command id */ - u32 video_head; /* in: head */ - u32 pitch; /* in: line size in byte */ -}; - -/* audio: initialize */ -struct ps3av_pkt_audio_init { - struct ps3av_send_hdr send_hdr; - /* recv */ - u32 reserved; -}; - -/* audio: mode setting */ -struct ps3av_pkt_audio_mode { - struct ps3av_send_hdr send_hdr; - u8 avport; /* in: avport */ - u8 reserved0[3]; - u32 mask; /* in: mask */ - u32 audio_num_of_ch; /* in: number of ch */ - u32 audio_fs; /* in: sampling freq */ - u32 audio_word_bits; /* in: sample bit size */ - u32 audio_format; /* in: audio output format */ - u32 audio_source; /* in: audio source */ - u8 audio_enable[4]; /* in: audio enable */ - u8 audio_swap[4]; /* in: audio swap */ - u8 audio_map[4]; /* in: audio map */ - u32 audio_layout; /* in: speaker layout */ - u32 audio_downmix; /* in: audio downmix permission */ - u32 audio_downmix_level; - u8 audio_cs_info[8]; /* in: IEC channel status */ -}; - -/* audio: mute */ -struct ps3av_audio_mute { - u8 avport; /* in: opt_port optical */ - u8 reserved[3]; - u32 mute; /* in: mute */ -}; - -struct ps3av_pkt_audio_mute { - struct ps3av_send_hdr send_hdr; - struct ps3av_audio_mute mute[PS3AV_OPT_PORT_MAX]; -}; - -/* audio: active/inactive */ -struct ps3av_pkt_audio_active { - struct ps3av_send_hdr send_hdr; - u32 audio_port; /* in: audio active/inactive port */ -}; - -/* audio: SPDIF user bit */ -struct ps3av_pkt_audio_spdif_bit { - u16 version; - u16 size; /* size of command packet */ - u32 cid; /* command id */ - u8 avport; /* in: avport SPDIF only */ - u8 reserved[3]; - u32 audio_port; /* in: SPDIF only */ - u32 spdif_bit_data[12]; /* in: user bit data */ -}; - -/* audio: audio control */ -struct ps3av_pkt_audio_ctrl { - u16 version; - u16 size; /* size of command packet */ - u32 cid; /* command id */ - u32 audio_ctrl_id; /* in: control id */ - u32 audio_ctrl_data[4]; /* in: control data */ -}; - -/* avb:param */ -#define PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE \ - (PS3AV_AVB_NUM_VIDEO*sizeof(struct ps3av_pkt_video_mode) + \ - PS3AV_AVB_NUM_AUDIO*sizeof(struct ps3av_pkt_audio_mode) + \ - PS3AV_AVB_NUM_AV_VIDEO*sizeof(struct ps3av_pkt_av_video_cs) + \ - PS3AV_AVB_NUM_AV_AUDIO*sizeof(struct ps3av_pkt_av_audio_param)) - -struct ps3av_pkt_avb_param { - struct ps3av_send_hdr send_hdr; - u16 num_of_video_pkt; - u16 num_of_audio_pkt; - u16 num_of_av_video_pkt; - u16 num_of_av_audio_pkt; - /* - * The actual buffer layout depends on the fields above: - * - * struct ps3av_pkt_video_mode video[num_of_video_pkt]; - * struct ps3av_pkt_audio_mode audio[num_of_audio_pkt]; - * struct ps3av_pkt_av_video_cs av_video[num_of_av_video_pkt]; - * struct ps3av_pkt_av_audio_param av_audio[num_of_av_audio_pkt]; - */ - u8 buf[PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE]; -}; - - -/** command status **/ -#define PS3AV_STATUS_SUCCESS 0x0000 /* success */ -#define PS3AV_STATUS_RECEIVE_VUART_ERROR 0x0001 /* receive vuart error */ -#define PS3AV_STATUS_SYSCON_COMMUNICATE_FAIL 0x0002 /* syscon communication error */ -#define PS3AV_STATUS_INVALID_COMMAND 0x0003 /* obsolete invalid CID */ -#define PS3AV_STATUS_INVALID_PORT 0x0004 /* invalid port number */ -#define PS3AV_STATUS_INVALID_VID 0x0005 /* invalid video format */ -#define PS3AV_STATUS_INVALID_COLOR_SPACE 0x0006 /* invalid video colose space */ -#define PS3AV_STATUS_INVALID_FS 0x0007 /* invalid audio sampling freq */ -#define PS3AV_STATUS_INVALID_AUDIO_CH 0x0008 /* invalid audio channel number */ -#define PS3AV_STATUS_UNSUPPORTED_VERSION 0x0009 /* version mismatch */ -#define PS3AV_STATUS_INVALID_SAMPLE_SIZE 0x000a /* invalid audio sample bit size */ -#define PS3AV_STATUS_FAILURE 0x000b /* other failures */ -#define PS3AV_STATUS_UNSUPPORTED_COMMAND 0x000c /* unsupported cid */ -#define PS3AV_STATUS_BUFFER_OVERFLOW 0x000d /* write buffer overflow */ -#define PS3AV_STATUS_INVALID_VIDEO_PARAM 0x000e /* invalid video param */ -#define PS3AV_STATUS_NO_SEL 0x000f /* not exist selector */ -#define PS3AV_STATUS_INVALID_AV_PARAM 0x0010 /* invalid backend param */ -#define PS3AV_STATUS_INVALID_AUDIO_PARAM 0x0011 /* invalid audio param */ -#define PS3AV_STATUS_UNSUPPORTED_HDMI_MODE 0x0012 /* unsupported hdmi mode */ -#define PS3AV_STATUS_NO_SYNC_HEAD 0x0013 /* sync head failed */ - -extern void ps3av_set_hdr(u32, u16, struct ps3av_send_hdr *); -extern int ps3av_do_pkt(u32, u16, size_t, struct ps3av_send_hdr *); - -extern int ps3av_cmd_init(void); -extern int ps3av_cmd_fin(void); -extern int ps3av_cmd_av_video_mute(int, u32 *, u32); -extern int ps3av_cmd_av_video_disable_sig(u32); -extern int ps3av_cmd_av_tv_mute(u32, u32); -extern int ps3av_cmd_enable_event(void); -extern int ps3av_cmd_av_hdmi_mode(u8); -extern u32 ps3av_cmd_set_av_video_cs(void *, u32, int, int, int, u32); -extern u32 ps3av_cmd_set_video_mode(void *, u32, int, int, u32); -extern int ps3av_cmd_video_format_black(u32, u32, u32); -extern int ps3av_cmd_av_audio_mute(int, u32 *, u32); -extern u32 ps3av_cmd_set_av_audio_param(void *, u32, - const struct ps3av_pkt_audio_mode *, - u32); -extern void ps3av_cmd_set_audio_mode(struct ps3av_pkt_audio_mode *, u32, u32, - u32, u32, u32, u32); -extern int ps3av_cmd_audio_mode(struct ps3av_pkt_audio_mode *); -extern int ps3av_cmd_audio_mute(int, u32 *, u32); -extern int ps3av_cmd_audio_active(int, u32); -extern int ps3av_cmd_avb_param(struct ps3av_pkt_avb_param *, u32); -extern int ps3av_cmd_av_get_hw_conf(struct ps3av_pkt_av_get_hw_conf *); -extern int ps3av_cmd_video_get_monitor_info(struct ps3av_pkt_av_get_monitor_info *, - u32); - -extern int ps3av_set_video_mode(u32); -extern int ps3av_set_audio_mode(u32, u32, u32, u32, u32); -extern int ps3av_get_auto_mode(void); -extern int ps3av_get_mode(void); -extern int ps3av_video_mode2res(u32, u32 *, u32 *); -extern int ps3av_video_mute(int); -extern int ps3av_audio_mute(int); -extern int ps3av_dev_open(void); -extern int ps3av_dev_close(void); -extern void ps3av_register_flip_ctl(void (*flip_ctl)(int on, void *data), - void *flip_data); -extern void ps3av_flip_ctl(int on); - -#endif /* _ASM_POWERPC_PS3AV_H_ */ diff --git a/include/asm-powerpc/ps3fb.h b/include/asm-powerpc/ps3fb.h deleted file mode 100644 index 3f121fe4010d..000000000000 --- a/include/asm-powerpc/ps3fb.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (C) 2006 Sony Computer Entertainment Inc. - * Copyright 2006, 2007 Sony Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published - * by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef _ASM_POWERPC_PS3FB_H_ -#define _ASM_POWERPC_PS3FB_H_ - -#include - -/* ioctl */ -#define PS3FB_IOCTL_SETMODE _IOW('r', 1, int) /* set video mode */ -#define PS3FB_IOCTL_GETMODE _IOR('r', 2, int) /* get video mode */ -#define PS3FB_IOCTL_SCREENINFO _IOR('r', 3, int) /* get screen info */ -#define PS3FB_IOCTL_ON _IO('r', 4) /* use IOCTL_FSEL */ -#define PS3FB_IOCTL_OFF _IO('r', 5) /* return to normal-flip */ -#define PS3FB_IOCTL_FSEL _IOW('r', 6, int) /* blit and flip request */ - -#ifndef FBIO_WAITFORVSYNC -#define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32) /* wait for vsync */ -#endif - -struct ps3fb_ioctl_res { - __u32 xres; /* frame buffer x_size */ - __u32 yres; /* frame buffer y_size */ - __u32 xoff; /* margine x */ - __u32 yoff; /* margine y */ - __u32 num_frames; /* num of frame buffers */ -}; - -#endif /* _ASM_POWERPC_PS3FB_H_ */ diff --git a/include/asm-powerpc/ps3stor.h b/include/asm-powerpc/ps3stor.h deleted file mode 100644 index 6fcaf714fa50..000000000000 --- a/include/asm-powerpc/ps3stor.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * PS3 Storage Devices - * - * Copyright (C) 2007 Sony Computer Entertainment Inc. - * Copyright 2007 Sony Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published - * by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef _ASM_POWERPC_PS3STOR_H_ -#define _ASM_POWERPC_PS3STOR_H_ - -#include - -#include - - -struct ps3_storage_region { - unsigned int id; - u64 start; - u64 size; -}; - -struct ps3_storage_device { - struct ps3_system_bus_device sbd; - - struct ps3_dma_region dma_region; - unsigned int irq; - u64 blk_size; - - u64 tag; - u64 lv1_status; - struct completion done; - - unsigned long bounce_size; - void *bounce_buf; - u64 bounce_lpar; - dma_addr_t bounce_dma; - - unsigned int num_regions; - unsigned long accessible_regions; - unsigned int region_idx; /* first accessible region */ - struct ps3_storage_region regions[0]; /* Must be last */ -}; - -static inline struct ps3_storage_device *to_ps3_storage_device(struct device *dev) -{ - return container_of(dev, struct ps3_storage_device, sbd.core); -} - -extern int ps3stor_setup(struct ps3_storage_device *dev, - irq_handler_t handler); -extern void ps3stor_teardown(struct ps3_storage_device *dev); -extern u64 ps3stor_read_write_sectors(struct ps3_storage_device *dev, u64 lpar, - u64 start_sector, u64 sectors, - int write); -extern u64 ps3stor_send_command(struct ps3_storage_device *dev, u64 cmd, - u64 arg1, u64 arg2, u64 arg3, u64 arg4); - -#endif /* _ASM_POWERPC_PS3STOR_H_ */ diff --git a/include/asm-powerpc/ptrace.h b/include/asm-powerpc/ptrace.h deleted file mode 100644 index 734e0754fb9b..000000000000 --- a/include/asm-powerpc/ptrace.h +++ /dev/null @@ -1,293 +0,0 @@ -#ifndef _ASM_POWERPC_PTRACE_H -#define _ASM_POWERPC_PTRACE_H - -/* - * Copyright (C) 2001 PPC64 Team, IBM Corp - * - * This struct defines the way the registers are stored on the - * kernel stack during a system call or other kernel entry. - * - * this should only contain volatile regs - * since we can keep non-volatile in the thread_struct - * should set this up when only volatiles are saved - * by intr code. - * - * Since this is going on the stack, *CARE MUST BE TAKEN* to insure - * that the overall structure is a multiple of 16 bytes in length. - * - * Note that the offsets of the fields in this struct correspond with - * the PT_* values below. This simplifies arch/powerpc/kernel/ptrace.c. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __ASSEMBLY__ - -struct pt_regs { - unsigned long gpr[32]; - unsigned long nip; - unsigned long msr; - unsigned long orig_gpr3; /* Used for restarting system calls */ - unsigned long ctr; - unsigned long link; - unsigned long xer; - unsigned long ccr; -#ifdef __powerpc64__ - unsigned long softe; /* Soft enabled/disabled */ -#else - unsigned long mq; /* 601 only (not used at present) */ - /* Used on APUS to hold IPL value. */ -#endif - unsigned long trap; /* Reason for being here */ - /* N.B. for critical exceptions on 4xx, the dar and dsisr - fields are overloaded to hold srr0 and srr1. */ - unsigned long dar; /* Fault registers */ - unsigned long dsisr; /* on 4xx/Book-E used for ESR */ - unsigned long result; /* Result of a system call */ -}; - -#endif /* __ASSEMBLY__ */ - -#ifdef __KERNEL__ - -#ifdef __powerpc64__ - -#define __ARCH_WANT_COMPAT_SYS_PTRACE - -#define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */ -#define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */ -#define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265) -#define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + \ - STACK_FRAME_OVERHEAD + 288) -#define STACK_FRAME_MARKER 12 - -/* Size of dummy stack frame allocated when calling signal handler. */ -#define __SIGNAL_FRAMESIZE 128 -#define __SIGNAL_FRAMESIZE32 64 - -#else /* __powerpc64__ */ - -#define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */ -#define STACK_FRAME_LR_SAVE 1 /* Location of LR in stack frame */ -#define STACK_FRAME_REGS_MARKER ASM_CONST(0x72656773) -#define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD) -#define STACK_FRAME_MARKER 2 - -/* Size of stack frame allocated when calling signal handler. */ -#define __SIGNAL_FRAMESIZE 64 - -#endif /* __powerpc64__ */ - -#ifndef __ASSEMBLY__ - -#define instruction_pointer(regs) ((regs)->nip) -#define user_stack_pointer(regs) ((regs)->gpr[1]) -#define regs_return_value(regs) ((regs)->gpr[3]) - -#ifdef CONFIG_SMP -extern unsigned long profile_pc(struct pt_regs *regs); -#else -#define profile_pc(regs) instruction_pointer(regs) -#endif - -#ifdef __powerpc64__ -#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1) -#else -#define user_mode(regs) (((regs)->msr & MSR_PR) != 0) -#endif - -#define force_successful_syscall_return() \ - do { \ - set_thread_flag(TIF_NOERROR); \ - } while(0) - -struct task_struct; -extern unsigned long ptrace_get_reg(struct task_struct *task, int regno); -extern int ptrace_put_reg(struct task_struct *task, int regno, - unsigned long data); - -/* - * We use the least-significant bit of the trap field to indicate - * whether we have saved the full set of registers, or only a - * partial set. A 1 there means the partial set. - * On 4xx we use the next bit to indicate whether the exception - * is a critical exception (1 means it is). - */ -#define FULL_REGS(regs) (((regs)->trap & 1) == 0) -#ifndef __powerpc64__ -#define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) != 0) -#define IS_MCHECK_EXC(regs) (((regs)->trap & 4) != 0) -#define IS_DEBUG_EXC(regs) (((regs)->trap & 8) != 0) -#endif /* ! __powerpc64__ */ -#define TRAP(regs) ((regs)->trap & ~0xF) -#ifdef __powerpc64__ -#define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1) -#else -#define CHECK_FULL_REGS(regs) \ -do { \ - if ((regs)->trap & 1) \ - printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \ -} while (0) -#endif /* __powerpc64__ */ - -/* - * These are defined as per linux/ptrace.h, which see. - */ -#define arch_has_single_step() (1) -extern void user_enable_single_step(struct task_struct *); -extern void user_disable_single_step(struct task_struct *); - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -/* - * Offsets used by 'ptrace' system call interface. - * These can't be changed without breaking binary compatibility - * with MkLinux, etc. - */ -#define PT_R0 0 -#define PT_R1 1 -#define PT_R2 2 -#define PT_R3 3 -#define PT_R4 4 -#define PT_R5 5 -#define PT_R6 6 -#define PT_R7 7 -#define PT_R8 8 -#define PT_R9 9 -#define PT_R10 10 -#define PT_R11 11 -#define PT_R12 12 -#define PT_R13 13 -#define PT_R14 14 -#define PT_R15 15 -#define PT_R16 16 -#define PT_R17 17 -#define PT_R18 18 -#define PT_R19 19 -#define PT_R20 20 -#define PT_R21 21 -#define PT_R22 22 -#define PT_R23 23 -#define PT_R24 24 -#define PT_R25 25 -#define PT_R26 26 -#define PT_R27 27 -#define PT_R28 28 -#define PT_R29 29 -#define PT_R30 30 -#define PT_R31 31 - -#define PT_NIP 32 -#define PT_MSR 33 -#define PT_ORIG_R3 34 -#define PT_CTR 35 -#define PT_LNK 36 -#define PT_XER 37 -#define PT_CCR 38 -#ifndef __powerpc64__ -#define PT_MQ 39 -#else -#define PT_SOFTE 39 -#endif -#define PT_TRAP 40 -#define PT_DAR 41 -#define PT_DSISR 42 -#define PT_RESULT 43 -#define PT_REGS_COUNT 44 - -#define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */ - -#ifndef __powerpc64__ - -#define PT_FPR31 (PT_FPR0 + 2*31) -#define PT_FPSCR (PT_FPR0 + 2*32 + 1) - -#else /* __powerpc64__ */ - -#define PT_FPSCR (PT_FPR0 + 32) /* each FP reg occupies 1 slot in 64-bit space */ - -#ifdef __KERNEL__ -#define PT_FPSCR32 (PT_FPR0 + 2*32 + 1) /* each FP reg occupies 2 32-bit userspace slots */ -#endif - -#define PT_VR0 82 /* each Vector reg occupies 2 slots in 64-bit */ -#define PT_VSCR (PT_VR0 + 32*2 + 1) -#define PT_VRSAVE (PT_VR0 + 33*2) - -#ifdef __KERNEL__ -#define PT_VR0_32 164 /* each Vector reg occupies 4 slots in 32-bit */ -#define PT_VSCR_32 (PT_VR0 + 32*4 + 3) -#define PT_VRSAVE_32 (PT_VR0 + 33*4) -#endif - -/* - * Only store first 32 VSRs here. The second 32 VSRs in VR0-31 - */ -#define PT_VSR0 150 /* each VSR reg occupies 2 slots in 64-bit */ -#define PT_VSR31 (PT_VSR0 + 2*31) -#ifdef __KERNEL__ -#define PT_VSR0_32 300 /* each VSR reg occupies 4 slots in 32-bit */ -#endif -#endif /* __powerpc64__ */ - -/* - * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go. - * The transfer totals 34 quadword. Quadwords 0-31 contain the - * corresponding vector registers. Quadword 32 contains the vscr as the - * last word (offset 12) within that quadword. Quadword 33 contains the - * vrsave as the first word (offset 0) within the quadword. - * - * This definition of the VMX state is compatible with the current PPC32 - * ptrace interface. This allows signal handling and ptrace to use the same - * structures. This also simplifies the implementation of a bi-arch - * (combined (32- and 64-bit) gdb. - */ -#define PTRACE_GETVRREGS 18 -#define PTRACE_SETVRREGS 19 - -/* Get/set all the upper 32-bits of the SPE registers, accumulator, and - * spefscr, in one go */ -#define PTRACE_GETEVRREGS 20 -#define PTRACE_SETEVRREGS 21 - -/* Get the first 32 128bit VSX registers */ -#define PTRACE_GETVSRREGS 27 -#define PTRACE_SETVSRREGS 28 - -/* - * Get or set a debug register. The first 16 are DABR registers and the - * second 16 are IABR registers. - */ -#define PTRACE_GET_DEBUGREG 25 -#define PTRACE_SET_DEBUGREG 26 - -/* (new) PTRACE requests using the same numbers as x86 and the same - * argument ordering. Additionally, they support more registers too - */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 -#define PTRACE_GETREGS64 22 -#define PTRACE_SETREGS64 23 - -/* (old) PTRACE requests with inverted arguments */ -#define PPC_PTRACE_GETREGS 0x99 /* Get GPRs 0 - 31 */ -#define PPC_PTRACE_SETREGS 0x98 /* Set GPRs 0 - 31 */ -#define PPC_PTRACE_GETFPREGS 0x97 /* Get FPRs 0 - 31 */ -#define PPC_PTRACE_SETFPREGS 0x96 /* Set FPRs 0 - 31 */ - -/* Calls to trace a 64bit program from a 32bit program */ -#define PPC_PTRACE_PEEKTEXT_3264 0x95 -#define PPC_PTRACE_PEEKDATA_3264 0x94 -#define PPC_PTRACE_POKETEXT_3264 0x93 -#define PPC_PTRACE_POKEDATA_3264 0x92 -#define PPC_PTRACE_PEEKUSR_3264 0x91 -#define PPC_PTRACE_POKEUSR_3264 0x90 - -#endif /* _ASM_POWERPC_PTRACE_H */ diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h deleted file mode 100644 index edee15d269ea..000000000000 --- a/include/asm-powerpc/qe.h +++ /dev/null @@ -1,642 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. - * - * Authors: Shlomi Gridish - * Li Yang - * - * Description: - * QUICC Engine (QE) external definitions and structure. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _ASM_POWERPC_QE_H -#define _ASM_POWERPC_QE_H -#ifdef __KERNEL__ - -#include -#include -#include - -#define QE_NUM_OF_SNUM 28 -#define QE_NUM_OF_BRGS 16 -#define QE_NUM_OF_PORTS 1024 - -/* Memory partitions -*/ -#define MEM_PART_SYSTEM 0 -#define MEM_PART_SECONDARY 1 -#define MEM_PART_MURAM 2 - -/* Clocks and BRGs */ -enum qe_clock { - QE_CLK_NONE = 0, - QE_BRG1, /* Baud Rate Generator 1 */ - QE_BRG2, /* Baud Rate Generator 2 */ - QE_BRG3, /* Baud Rate Generator 3 */ - QE_BRG4, /* Baud Rate Generator 4 */ - QE_BRG5, /* Baud Rate Generator 5 */ - QE_BRG6, /* Baud Rate Generator 6 */ - QE_BRG7, /* Baud Rate Generator 7 */ - QE_BRG8, /* Baud Rate Generator 8 */ - QE_BRG9, /* Baud Rate Generator 9 */ - QE_BRG10, /* Baud Rate Generator 10 */ - QE_BRG11, /* Baud Rate Generator 11 */ - QE_BRG12, /* Baud Rate Generator 12 */ - QE_BRG13, /* Baud Rate Generator 13 */ - QE_BRG14, /* Baud Rate Generator 14 */ - QE_BRG15, /* Baud Rate Generator 15 */ - QE_BRG16, /* Baud Rate Generator 16 */ - QE_CLK1, /* Clock 1 */ - QE_CLK2, /* Clock 2 */ - QE_CLK3, /* Clock 3 */ - QE_CLK4, /* Clock 4 */ - QE_CLK5, /* Clock 5 */ - QE_CLK6, /* Clock 6 */ - QE_CLK7, /* Clock 7 */ - QE_CLK8, /* Clock 8 */ - QE_CLK9, /* Clock 9 */ - QE_CLK10, /* Clock 10 */ - QE_CLK11, /* Clock 11 */ - QE_CLK12, /* Clock 12 */ - QE_CLK13, /* Clock 13 */ - QE_CLK14, /* Clock 14 */ - QE_CLK15, /* Clock 15 */ - QE_CLK16, /* Clock 16 */ - QE_CLK17, /* Clock 17 */ - QE_CLK18, /* Clock 18 */ - QE_CLK19, /* Clock 19 */ - QE_CLK20, /* Clock 20 */ - QE_CLK21, /* Clock 21 */ - QE_CLK22, /* Clock 22 */ - QE_CLK23, /* Clock 23 */ - QE_CLK24, /* Clock 24 */ - QE_CLK_DUMMY -}; - -static inline bool qe_clock_is_brg(enum qe_clock clk) -{ - return clk >= QE_BRG1 && clk <= QE_BRG16; -} - -extern spinlock_t cmxgcr_lock; - -/* Export QE common operations */ -extern void __init qe_reset(void); - -/* QE PIO */ -#define QE_PIO_PINS 32 - -struct qe_pio_regs { - __be32 cpodr; /* Open drain register */ - __be32 cpdata; /* Data register */ - __be32 cpdir1; /* Direction register */ - __be32 cpdir2; /* Direction register */ - __be32 cppar1; /* Pin assignment register */ - __be32 cppar2; /* Pin assignment register */ -#ifdef CONFIG_PPC_85xx - u8 pad[8]; -#endif -}; - -extern int par_io_init(struct device_node *np); -extern int par_io_of_config(struct device_node *np); -#define QE_PIO_DIR_IN 2 -#define QE_PIO_DIR_OUT 1 -extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, - int dir, int open_drain, int assignment, - int has_irq); -extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, - int assignment, int has_irq); -extern int par_io_data_set(u8 port, u8 pin, u8 val); - -/* QE internal API */ -int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input); -enum qe_clock qe_clock_source(const char *source); -unsigned int qe_get_brg_clk(void); -int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); -int qe_get_snum(void); -void qe_put_snum(u8 snum); -/* we actually use cpm_muram implementation, define this for convenience */ -#define qe_muram_init cpm_muram_init -#define qe_muram_alloc cpm_muram_alloc -#define qe_muram_alloc_fixed cpm_muram_alloc_fixed -#define qe_muram_free cpm_muram_free -#define qe_muram_addr cpm_muram_addr -#define qe_muram_offset cpm_muram_offset - -/* Structure that defines QE firmware binary files. - * - * See Documentation/powerpc/qe-firmware.txt for a description of these - * fields. - */ -struct qe_firmware { - struct qe_header { - __be32 length; /* Length of the entire structure, in bytes */ - u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */ - u8 version; /* Version of this layout. First ver is '1' */ - } header; - u8 id[62]; /* Null-terminated identifier string */ - u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */ - u8 count; /* Number of microcode[] structures */ - struct { - __be16 model; /* The SOC model */ - u8 major; /* The SOC revision major */ - u8 minor; /* The SOC revision minor */ - } __attribute__ ((packed)) soc; - u8 padding[4]; /* Reserved, for alignment */ - __be64 extended_modes; /* Extended modes */ - __be32 vtraps[8]; /* Virtual trap addresses */ - u8 reserved[4]; /* Reserved, for future expansion */ - struct qe_microcode { - u8 id[32]; /* Null-terminated identifier */ - __be32 traps[16]; /* Trap addresses, 0 == ignore */ - __be32 eccr; /* The value for the ECCR register */ - __be32 iram_offset; /* Offset into I-RAM for the code */ - __be32 count; /* Number of 32-bit words of the code */ - __be32 code_offset; /* Offset of the actual microcode */ - u8 major; /* The microcode version major */ - u8 minor; /* The microcode version minor */ - u8 revision; /* The microcode version revision */ - u8 padding; /* Reserved, for alignment */ - u8 reserved[4]; /* Reserved, for future expansion */ - } __attribute__ ((packed)) microcode[1]; - /* All microcode binaries should be located here */ - /* CRC32 should be located here, after the microcode binaries */ -} __attribute__ ((packed)); - -struct qe_firmware_info { - char id[64]; /* Firmware name */ - u32 vtraps[8]; /* Virtual trap addresses */ - u64 extended_modes; /* Extended modes */ -}; - -/* Upload a firmware to the QE */ -int qe_upload_firmware(const struct qe_firmware *firmware); - -/* Obtain information on the uploaded firmware */ -struct qe_firmware_info *qe_get_firmware_info(void); - -/* QE USB */ -int qe_usb_clock_set(enum qe_clock clk, int rate); - -/* Buffer descriptors */ -struct qe_bd { - __be16 status; - __be16 length; - __be32 buf; -} __attribute__ ((packed)); - -#define BD_STATUS_MASK 0xffff0000 -#define BD_LENGTH_MASK 0x0000ffff - -/* Alignment */ -#define QE_INTR_TABLE_ALIGN 16 /* ??? */ -#define QE_ALIGNMENT_OF_BD 8 -#define QE_ALIGNMENT_OF_PRAM 64 - -/* RISC allocation */ -enum qe_risc_allocation { - QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */ - QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */ - QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose - RISC 1 or RISC 2 */ -}; - -/* QE extended filtering Table Lookup Key Size */ -enum qe_fltr_tbl_lookup_key_size { - QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES - = 0x3f, /* LookupKey parsed by the Generate LookupKey - CMD is truncated to 8 bytes */ - QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES - = 0x5f, /* LookupKey parsed by the Generate LookupKey - CMD is truncated to 16 bytes */ -}; - -/* QE FLTR extended filtering Largest External Table Lookup Key Size */ -enum qe_fltr_largest_external_tbl_lookup_key_size { - QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE - = 0x0,/* not used */ - QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES - = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */ - QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES - = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */ -}; - -/* structure representing QE parameter RAM */ -struct qe_timer_tables { - u16 tm_base; /* QE timer table base adr */ - u16 tm_ptr; /* QE timer table pointer */ - u16 r_tmr; /* QE timer mode register */ - u16 r_tmv; /* QE timer valid register */ - u32 tm_cmd; /* QE timer cmd register */ - u32 tm_cnt; /* QE timer internal cnt */ -} __attribute__ ((packed)); - -#define QE_FLTR_TAD_SIZE 8 - -/* QE extended filtering Termination Action Descriptor (TAD) */ -struct qe_fltr_tad { - u8 serialized[QE_FLTR_TAD_SIZE]; -} __attribute__ ((packed)); - -/* Communication Direction */ -enum comm_dir { - COMM_DIR_NONE = 0, - COMM_DIR_RX = 1, - COMM_DIR_TX = 2, - COMM_DIR_RX_AND_TX = 3 -}; - -/* QE CMXUCR Registers. - * There are two UCCs represented in each of the four CMXUCR registers. - * These values are for the UCC in the LSBs - */ -#define QE_CMXUCR_MII_ENET_MNG 0x00007000 -#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12 -#define QE_CMXUCR_GRANT 0x00008000 -#define QE_CMXUCR_TSA 0x00004000 -#define QE_CMXUCR_BKPT 0x00000100 -#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F - -/* QE CMXGCR Registers. -*/ -#define QE_CMXGCR_MII_ENET_MNG 0x00007000 -#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 -#define QE_CMXGCR_USBCS 0x0000000f -#define QE_CMXGCR_USBCS_CLK3 0x1 -#define QE_CMXGCR_USBCS_CLK5 0x2 -#define QE_CMXGCR_USBCS_CLK7 0x3 -#define QE_CMXGCR_USBCS_CLK9 0x4 -#define QE_CMXGCR_USBCS_CLK13 0x5 -#define QE_CMXGCR_USBCS_CLK17 0x6 -#define QE_CMXGCR_USBCS_CLK19 0x7 -#define QE_CMXGCR_USBCS_CLK21 0x8 -#define QE_CMXGCR_USBCS_BRG9 0x9 -#define QE_CMXGCR_USBCS_BRG10 0xa - -/* QE CECR Commands. -*/ -#define QE_CR_FLG 0x00010000 -#define QE_RESET 0x80000000 -#define QE_INIT_TX_RX 0x00000000 -#define QE_INIT_RX 0x00000001 -#define QE_INIT_TX 0x00000002 -#define QE_ENTER_HUNT_MODE 0x00000003 -#define QE_STOP_TX 0x00000004 -#define QE_GRACEFUL_STOP_TX 0x00000005 -#define QE_RESTART_TX 0x00000006 -#define QE_CLOSE_RX_BD 0x00000007 -#define QE_SWITCH_COMMAND 0x00000007 -#define QE_SET_GROUP_ADDRESS 0x00000008 -#define QE_START_IDMA 0x00000009 -#define QE_MCC_STOP_RX 0x00000009 -#define QE_ATM_TRANSMIT 0x0000000a -#define QE_HPAC_CLEAR_ALL 0x0000000b -#define QE_GRACEFUL_STOP_RX 0x0000001a -#define QE_RESTART_RX 0x0000001b -#define QE_HPAC_SET_PRIORITY 0x0000010b -#define QE_HPAC_STOP_TX 0x0000020b -#define QE_HPAC_STOP_RX 0x0000030b -#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b -#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b -#define QE_HPAC_START_TX 0x0000060b -#define QE_HPAC_START_RX 0x0000070b -#define QE_USB_STOP_TX 0x0000000a -#define QE_USB_RESTART_TX 0x0000000c -#define QE_QMC_STOP_TX 0x0000000c -#define QE_QMC_STOP_RX 0x0000000d -#define QE_SS7_SU_FIL_RESET 0x0000000e -/* jonathbr added from here down for 83xx */ -#define QE_RESET_BCS 0x0000000a -#define QE_MCC_INIT_TX_RX_16 0x00000003 -#define QE_MCC_STOP_TX 0x00000004 -#define QE_MCC_INIT_TX_1 0x00000005 -#define QE_MCC_INIT_RX_1 0x00000006 -#define QE_MCC_RESET 0x00000007 -#define QE_SET_TIMER 0x00000008 -#define QE_RANDOM_NUMBER 0x0000000c -#define QE_ATM_MULTI_THREAD_INIT 0x00000011 -#define QE_ASSIGN_PAGE 0x00000012 -#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013 -#define QE_START_FLOW_CONTROL 0x00000014 -#define QE_STOP_FLOW_CONTROL 0x00000015 -#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016 - -#define QE_ASSIGN_RISC 0x00000010 -#define QE_CR_MCN_NORMAL_SHIFT 6 -#define QE_CR_MCN_USB_SHIFT 4 -#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8 -#define QE_CR_SNUM_SHIFT 17 - -/* QE CECR Sub Block - sub block of QE command. -*/ -#define QE_CR_SUBBLOCK_INVALID 0x00000000 -#define QE_CR_SUBBLOCK_USB 0x03200000 -#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000 -#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000 -#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000 -#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000 -#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000 -#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000 -#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000 -#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000 -#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000 -#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000 -#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000 -#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000 -#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000 -#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000 -#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000 -#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000 -#define QE_CR_SUBBLOCK_MCC1 0x03800000 -#define QE_CR_SUBBLOCK_MCC2 0x03a00000 -#define QE_CR_SUBBLOCK_MCC3 0x03000000 -#define QE_CR_SUBBLOCK_IDMA1 0x02800000 -#define QE_CR_SUBBLOCK_IDMA2 0x02a00000 -#define QE_CR_SUBBLOCK_IDMA3 0x02c00000 -#define QE_CR_SUBBLOCK_IDMA4 0x02e00000 -#define QE_CR_SUBBLOCK_HPAC 0x01e00000 -#define QE_CR_SUBBLOCK_SPI1 0x01400000 -#define QE_CR_SUBBLOCK_SPI2 0x01600000 -#define QE_CR_SUBBLOCK_RAND 0x01c00000 -#define QE_CR_SUBBLOCK_TIMER 0x01e00000 -#define QE_CR_SUBBLOCK_GENERAL 0x03c00000 - -/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */ -#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */ -#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00 -#define QE_CR_PROTOCOL_QMC 0x02 -#define QE_CR_PROTOCOL_UART 0x04 -#define QE_CR_PROTOCOL_ATM_POS 0x0A -#define QE_CR_PROTOCOL_ETHERNET 0x0C -#define QE_CR_PROTOCOL_L2_SWITCH 0x0D - -/* BRG configuration register */ -#define QE_BRGC_ENABLE 0x00010000 -#define QE_BRGC_DIVISOR_SHIFT 1 -#define QE_BRGC_DIVISOR_MAX 0xFFF -#define QE_BRGC_DIV16 1 - -/* QE Timers registers */ -#define QE_GTCFR1_PCAS 0x80 -#define QE_GTCFR1_STP2 0x20 -#define QE_GTCFR1_RST2 0x10 -#define QE_GTCFR1_GM2 0x08 -#define QE_GTCFR1_GM1 0x04 -#define QE_GTCFR1_STP1 0x02 -#define QE_GTCFR1_RST1 0x01 - -/* SDMA registers */ -#define QE_SDSR_BER1 0x02000000 -#define QE_SDSR_BER2 0x01000000 - -#define QE_SDMR_GLB_1_MSK 0x80000000 -#define QE_SDMR_ADR_SEL 0x20000000 -#define QE_SDMR_BER1_MSK 0x02000000 -#define QE_SDMR_BER2_MSK 0x01000000 -#define QE_SDMR_EB1_MSK 0x00800000 -#define QE_SDMR_ER1_MSK 0x00080000 -#define QE_SDMR_ER2_MSK 0x00040000 -#define QE_SDMR_CEN_MASK 0x0000E000 -#define QE_SDMR_SBER_1 0x00000200 -#define QE_SDMR_SBER_2 0x00000200 -#define QE_SDMR_EB1_PR_MASK 0x000000C0 -#define QE_SDMR_ER1_PR 0x00000008 - -#define QE_SDMR_CEN_SHIFT 13 -#define QE_SDMR_EB1_PR_SHIFT 6 - -#define QE_SDTM_MSNUM_SHIFT 24 - -#define QE_SDEBCR_BA_MASK 0x01FFFFFF - -/* Communication Processor */ -#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */ -#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */ -#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */ - -/* I-RAM */ -#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */ -#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */ - -/* UPC */ -#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ -#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */ -#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */ -#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */ -#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */ - -/* UCC GUEMR register */ -#define UCC_GUEMR_MODE_MASK_RX 0x02 -#define UCC_GUEMR_MODE_FAST_RX 0x02 -#define UCC_GUEMR_MODE_SLOW_RX 0x00 -#define UCC_GUEMR_MODE_MASK_TX 0x01 -#define UCC_GUEMR_MODE_FAST_TX 0x01 -#define UCC_GUEMR_MODE_SLOW_TX 0x00 -#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX) -#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but - must be set 1 */ - -/* structure representing UCC SLOW parameter RAM */ -struct ucc_slow_pram { - __be16 rbase; /* RX BD base address */ - __be16 tbase; /* TX BD base address */ - u8 rbmr; /* RX bus mode register (same as CPM's RFCR) */ - u8 tbmr; /* TX bus mode register (same as CPM's TFCR) */ - __be16 mrblr; /* Rx buffer length */ - __be32 rstate; /* Rx internal state */ - __be32 rptr; /* Rx internal data pointer */ - __be16 rbptr; /* rb BD Pointer */ - __be16 rcount; /* Rx internal byte count */ - __be32 rtemp; /* Rx temp */ - __be32 tstate; /* Tx internal state */ - __be32 tptr; /* Tx internal data pointer */ - __be16 tbptr; /* Tx BD pointer */ - __be16 tcount; /* Tx byte count */ - __be32 ttemp; /* Tx temp */ - __be32 rcrc; /* temp receive CRC */ - __be32 tcrc; /* temp transmit CRC */ -} __attribute__ ((packed)); - -/* General UCC SLOW Mode Register (GUMRH & GUMRL) */ -#define UCC_SLOW_GUMR_H_SAM_QMC 0x00000000 -#define UCC_SLOW_GUMR_H_SAM_SATM 0x00008000 -#define UCC_SLOW_GUMR_H_REVD 0x00002000 -#define UCC_SLOW_GUMR_H_TRX 0x00001000 -#define UCC_SLOW_GUMR_H_TTX 0x00000800 -#define UCC_SLOW_GUMR_H_CDP 0x00000400 -#define UCC_SLOW_GUMR_H_CTSP 0x00000200 -#define UCC_SLOW_GUMR_H_CDS 0x00000100 -#define UCC_SLOW_GUMR_H_CTSS 0x00000080 -#define UCC_SLOW_GUMR_H_TFL 0x00000040 -#define UCC_SLOW_GUMR_H_RFW 0x00000020 -#define UCC_SLOW_GUMR_H_TXSY 0x00000010 -#define UCC_SLOW_GUMR_H_4SYNC 0x00000004 -#define UCC_SLOW_GUMR_H_8SYNC 0x00000008 -#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c -#define UCC_SLOW_GUMR_H_RTSM 0x00000002 -#define UCC_SLOW_GUMR_H_RSYN 0x00000001 - -#define UCC_SLOW_GUMR_L_TCI 0x10000000 -#define UCC_SLOW_GUMR_L_RINV 0x02000000 -#define UCC_SLOW_GUMR_L_TINV 0x01000000 -#define UCC_SLOW_GUMR_L_TEND 0x00040000 -#define UCC_SLOW_GUMR_L_TDCR_MASK 0x00030000 -#define UCC_SLOW_GUMR_L_TDCR_32 0x00030000 -#define UCC_SLOW_GUMR_L_TDCR_16 0x00020000 -#define UCC_SLOW_GUMR_L_TDCR_8 0x00010000 -#define UCC_SLOW_GUMR_L_TDCR_1 0x00000000 -#define UCC_SLOW_GUMR_L_RDCR_MASK 0x0000c000 -#define UCC_SLOW_GUMR_L_RDCR_32 0x0000c000 -#define UCC_SLOW_GUMR_L_RDCR_16 0x00008000 -#define UCC_SLOW_GUMR_L_RDCR_8 0x00004000 -#define UCC_SLOW_GUMR_L_RDCR_1 0x00000000 -#define UCC_SLOW_GUMR_L_RENC_NRZI 0x00000800 -#define UCC_SLOW_GUMR_L_RENC_NRZ 0x00000000 -#define UCC_SLOW_GUMR_L_TENC_NRZI 0x00000100 -#define UCC_SLOW_GUMR_L_TENC_NRZ 0x00000000 -#define UCC_SLOW_GUMR_L_DIAG_MASK 0x000000c0 -#define UCC_SLOW_GUMR_L_DIAG_LE 0x000000c0 -#define UCC_SLOW_GUMR_L_DIAG_ECHO 0x00000080 -#define UCC_SLOW_GUMR_L_DIAG_LOOP 0x00000040 -#define UCC_SLOW_GUMR_L_DIAG_NORM 0x00000000 -#define UCC_SLOW_GUMR_L_ENR 0x00000020 -#define UCC_SLOW_GUMR_L_ENT 0x00000010 -#define UCC_SLOW_GUMR_L_MODE_MASK 0x0000000F -#define UCC_SLOW_GUMR_L_MODE_BISYNC 0x00000008 -#define UCC_SLOW_GUMR_L_MODE_AHDLC 0x00000006 -#define UCC_SLOW_GUMR_L_MODE_UART 0x00000004 -#define UCC_SLOW_GUMR_L_MODE_QMC 0x00000002 - -/* General UCC FAST Mode Register */ -#define UCC_FAST_GUMR_TCI 0x20000000 -#define UCC_FAST_GUMR_TRX 0x10000000 -#define UCC_FAST_GUMR_TTX 0x08000000 -#define UCC_FAST_GUMR_CDP 0x04000000 -#define UCC_FAST_GUMR_CTSP 0x02000000 -#define UCC_FAST_GUMR_CDS 0x01000000 -#define UCC_FAST_GUMR_CTSS 0x00800000 -#define UCC_FAST_GUMR_TXSY 0x00020000 -#define UCC_FAST_GUMR_RSYN 0x00010000 -#define UCC_FAST_GUMR_RTSM 0x00002000 -#define UCC_FAST_GUMR_REVD 0x00000400 -#define UCC_FAST_GUMR_ENR 0x00000020 -#define UCC_FAST_GUMR_ENT 0x00000010 - -/* UART Slow UCC Event Register (UCCE) */ -#define UCC_UART_UCCE_AB 0x0200 -#define UCC_UART_UCCE_IDLE 0x0100 -#define UCC_UART_UCCE_GRA 0x0080 -#define UCC_UART_UCCE_BRKE 0x0040 -#define UCC_UART_UCCE_BRKS 0x0020 -#define UCC_UART_UCCE_CCR 0x0008 -#define UCC_UART_UCCE_BSY 0x0004 -#define UCC_UART_UCCE_TX 0x0002 -#define UCC_UART_UCCE_RX 0x0001 - -/* HDLC Slow UCC Event Register (UCCE) */ -#define UCC_HDLC_UCCE_GLR 0x1000 -#define UCC_HDLC_UCCE_GLT 0x0800 -#define UCC_HDLC_UCCE_IDLE 0x0100 -#define UCC_HDLC_UCCE_BRKE 0x0040 -#define UCC_HDLC_UCCE_BRKS 0x0020 -#define UCC_HDLC_UCCE_TXE 0x0010 -#define UCC_HDLC_UCCE_RXF 0x0008 -#define UCC_HDLC_UCCE_BSY 0x0004 -#define UCC_HDLC_UCCE_TXB 0x0002 -#define UCC_HDLC_UCCE_RXB 0x0001 - -/* BISYNC Slow UCC Event Register (UCCE) */ -#define UCC_BISYNC_UCCE_GRA 0x0080 -#define UCC_BISYNC_UCCE_TXE 0x0010 -#define UCC_BISYNC_UCCE_RCH 0x0008 -#define UCC_BISYNC_UCCE_BSY 0x0004 -#define UCC_BISYNC_UCCE_TXB 0x0002 -#define UCC_BISYNC_UCCE_RXB 0x0001 - -/* Gigabit Ethernet Fast UCC Event Register (UCCE) */ -#define UCC_GETH_UCCE_MPD 0x80000000 -#define UCC_GETH_UCCE_SCAR 0x40000000 -#define UCC_GETH_UCCE_GRA 0x20000000 -#define UCC_GETH_UCCE_CBPR 0x10000000 -#define UCC_GETH_UCCE_BSY 0x08000000 -#define UCC_GETH_UCCE_RXC 0x04000000 -#define UCC_GETH_UCCE_TXC 0x02000000 -#define UCC_GETH_UCCE_TXE 0x01000000 -#define UCC_GETH_UCCE_TXB7 0x00800000 -#define UCC_GETH_UCCE_TXB6 0x00400000 -#define UCC_GETH_UCCE_TXB5 0x00200000 -#define UCC_GETH_UCCE_TXB4 0x00100000 -#define UCC_GETH_UCCE_TXB3 0x00080000 -#define UCC_GETH_UCCE_TXB2 0x00040000 -#define UCC_GETH_UCCE_TXB1 0x00020000 -#define UCC_GETH_UCCE_TXB0 0x00010000 -#define UCC_GETH_UCCE_RXB7 0x00008000 -#define UCC_GETH_UCCE_RXB6 0x00004000 -#define UCC_GETH_UCCE_RXB5 0x00002000 -#define UCC_GETH_UCCE_RXB4 0x00001000 -#define UCC_GETH_UCCE_RXB3 0x00000800 -#define UCC_GETH_UCCE_RXB2 0x00000400 -#define UCC_GETH_UCCE_RXB1 0x00000200 -#define UCC_GETH_UCCE_RXB0 0x00000100 -#define UCC_GETH_UCCE_RXF7 0x00000080 -#define UCC_GETH_UCCE_RXF6 0x00000040 -#define UCC_GETH_UCCE_RXF5 0x00000020 -#define UCC_GETH_UCCE_RXF4 0x00000010 -#define UCC_GETH_UCCE_RXF3 0x00000008 -#define UCC_GETH_UCCE_RXF2 0x00000004 -#define UCC_GETH_UCCE_RXF1 0x00000002 -#define UCC_GETH_UCCE_RXF0 0x00000001 - -/* UPSMR, when used as a UART */ -#define UCC_UART_UPSMR_FLC 0x8000 -#define UCC_UART_UPSMR_SL 0x4000 -#define UCC_UART_UPSMR_CL_MASK 0x3000 -#define UCC_UART_UPSMR_CL_8 0x3000 -#define UCC_UART_UPSMR_CL_7 0x2000 -#define UCC_UART_UPSMR_CL_6 0x1000 -#define UCC_UART_UPSMR_CL_5 0x0000 -#define UCC_UART_UPSMR_UM_MASK 0x0c00 -#define UCC_UART_UPSMR_UM_NORMAL 0x0000 -#define UCC_UART_UPSMR_UM_MAN_MULTI 0x0400 -#define UCC_UART_UPSMR_UM_AUTO_MULTI 0x0c00 -#define UCC_UART_UPSMR_FRZ 0x0200 -#define UCC_UART_UPSMR_RZS 0x0100 -#define UCC_UART_UPSMR_SYN 0x0080 -#define UCC_UART_UPSMR_DRT 0x0040 -#define UCC_UART_UPSMR_PEN 0x0010 -#define UCC_UART_UPSMR_RPM_MASK 0x000c -#define UCC_UART_UPSMR_RPM_ODD 0x0000 -#define UCC_UART_UPSMR_RPM_LOW 0x0004 -#define UCC_UART_UPSMR_RPM_EVEN 0x0008 -#define UCC_UART_UPSMR_RPM_HIGH 0x000C -#define UCC_UART_UPSMR_TPM_MASK 0x0003 -#define UCC_UART_UPSMR_TPM_ODD 0x0000 -#define UCC_UART_UPSMR_TPM_LOW 0x0001 -#define UCC_UART_UPSMR_TPM_EVEN 0x0002 -#define UCC_UART_UPSMR_TPM_HIGH 0x0003 - -/* UCC Transmit On Demand Register (UTODR) */ -#define UCC_SLOW_TOD 0x8000 -#define UCC_FAST_TOD 0x8000 - -/* UCC Bus Mode Register masks */ -/* Not to be confused with the Bundle Mode Register */ -#define UCC_BMR_GBL 0x20 -#define UCC_BMR_BO_BE 0x10 -#define UCC_BMR_CETM 0x04 -#define UCC_BMR_DTB 0x02 -#define UCC_BMR_BDB 0x01 - -/* Function code masks */ -#define FC_GBL 0x20 -#define FC_DTB_LCL 0x02 -#define UCC_FAST_FUNCTION_CODE_GBL 0x20 -#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02 -#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01 - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_QE_H */ diff --git a/include/asm-powerpc/qe_ic.h b/include/asm-powerpc/qe_ic.h deleted file mode 100644 index a779b2c9eaf1..000000000000 --- a/include/asm-powerpc/qe_ic.h +++ /dev/null @@ -1,130 +0,0 @@ -/* - * include/asm-powerpc/qe_ic.h - * - * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. - * - * Authors: Shlomi Gridish - * Li Yang - * - * Description: - * QE IC external definitions and structure. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _ASM_POWERPC_QE_IC_H -#define _ASM_POWERPC_QE_IC_H - -#include - -#define NUM_OF_QE_IC_GROUPS 6 - -/* Flags when we init the QE IC */ -#define QE_IC_SPREADMODE_GRP_W 0x00000001 -#define QE_IC_SPREADMODE_GRP_X 0x00000002 -#define QE_IC_SPREADMODE_GRP_Y 0x00000004 -#define QE_IC_SPREADMODE_GRP_Z 0x00000008 -#define QE_IC_SPREADMODE_GRP_RISCA 0x00000010 -#define QE_IC_SPREADMODE_GRP_RISCB 0x00000020 - -#define QE_IC_LOW_SIGNAL 0x00000100 -#define QE_IC_HIGH_SIGNAL 0x00000200 - -#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH 0x00001000 -#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH 0x00002000 -#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH 0x00004000 -#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH 0x00008000 -#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH 0x00010000 -#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH 0x00020000 -#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH 0x00040000 -#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH 0x00080000 -#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH 0x00100000 -#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH 0x00200000 -#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH 0x00400000 -#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH 0x00800000 -#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT (12) - -/* QE interrupt sources groups */ -enum qe_ic_grp_id { - QE_IC_GRP_W = 0, /* QE interrupt controller group W */ - QE_IC_GRP_X, /* QE interrupt controller group X */ - QE_IC_GRP_Y, /* QE interrupt controller group Y */ - QE_IC_GRP_Z, /* QE interrupt controller group Z */ - QE_IC_GRP_RISCA, /* QE interrupt controller RISC group A */ - QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */ -}; - -void qe_ic_init(struct device_node *node, unsigned int flags, - void (*low_handler)(unsigned int irq, struct irq_desc *desc), - void (*high_handler)(unsigned int irq, struct irq_desc *desc)); -void qe_ic_set_highest_priority(unsigned int virq, int high); -int qe_ic_set_priority(unsigned int virq, unsigned int priority); -int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high); - -struct qe_ic; -unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic); -unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic); - -static inline void qe_ic_cascade_low_ipic(unsigned int irq, - struct irq_desc *desc) -{ - struct qe_ic *qe_ic = desc->handler_data; - unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic); - - if (cascade_irq != NO_IRQ) - generic_handle_irq(cascade_irq); -} - -static inline void qe_ic_cascade_high_ipic(unsigned int irq, - struct irq_desc *desc) -{ - struct qe_ic *qe_ic = desc->handler_data; - unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic); - - if (cascade_irq != NO_IRQ) - generic_handle_irq(cascade_irq); -} - -static inline void qe_ic_cascade_low_mpic(unsigned int irq, - struct irq_desc *desc) -{ - struct qe_ic *qe_ic = desc->handler_data; - unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic); - - if (cascade_irq != NO_IRQ) - generic_handle_irq(cascade_irq); - - desc->chip->eoi(irq); -} - -static inline void qe_ic_cascade_high_mpic(unsigned int irq, - struct irq_desc *desc) -{ - struct qe_ic *qe_ic = desc->handler_data; - unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic); - - if (cascade_irq != NO_IRQ) - generic_handle_irq(cascade_irq); - - desc->chip->eoi(irq); -} - -static inline void qe_ic_cascade_muxed_mpic(unsigned int irq, - struct irq_desc *desc) -{ - struct qe_ic *qe_ic = desc->handler_data; - unsigned int cascade_irq; - - cascade_irq = qe_ic_get_high_irq(qe_ic); - if (cascade_irq == NO_IRQ) - cascade_irq = qe_ic_get_low_irq(qe_ic); - - if (cascade_irq != NO_IRQ) - generic_handle_irq(cascade_irq); - - desc->chip->eoi(irq); -} - -#endif /* _ASM_POWERPC_QE_IC_H */ diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h deleted file mode 100644 index c6d1ab650778..000000000000 --- a/include/asm-powerpc/reg.h +++ /dev/null @@ -1,788 +0,0 @@ -/* - * Contains the definition of registers common to all PowerPC variants. - * If a register definition has been changed in a different PowerPC - * variant, we will case it in #ifndef XXX ... #endif, and have the - * number used in the Programming Environments Manual For 32-Bit - * Implementations of the PowerPC Architecture (a.k.a. Green Book) here. - */ - -#ifndef _ASM_POWERPC_REG_H -#define _ASM_POWERPC_REG_H -#ifdef __KERNEL__ - -#include -#include - -/* Pickup Book E specific registers. */ -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) -#include -#endif /* CONFIG_BOOKE || CONFIG_40x */ - -#ifdef CONFIG_FSL_EMB_PERFMON -#include -#endif - -#ifdef CONFIG_8xx -#include -#endif /* CONFIG_8xx */ - -#define MSR_SF_LG 63 /* Enable 64 bit mode */ -#define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */ -#define MSR_HV_LG 60 /* Hypervisor state */ -#define MSR_VEC_LG 25 /* Enable AltiVec */ -#define MSR_VSX_LG 23 /* Enable VSX */ -#define MSR_POW_LG 18 /* Enable Power Management */ -#define MSR_WE_LG 18 /* Wait State Enable */ -#define MSR_TGPR_LG 17 /* TLB Update registers in use */ -#define MSR_CE_LG 17 /* Critical Interrupt Enable */ -#define MSR_ILE_LG 16 /* Interrupt Little Endian */ -#define MSR_EE_LG 15 /* External Interrupt Enable */ -#define MSR_PR_LG 14 /* Problem State / Privilege Level */ -#define MSR_FP_LG 13 /* Floating Point enable */ -#define MSR_ME_LG 12 /* Machine Check Enable */ -#define MSR_FE0_LG 11 /* Floating Exception mode 0 */ -#define MSR_SE_LG 10 /* Single Step */ -#define MSR_BE_LG 9 /* Branch Trace */ -#define MSR_DE_LG 9 /* Debug Exception Enable */ -#define MSR_FE1_LG 8 /* Floating Exception mode 1 */ -#define MSR_IP_LG 6 /* Exception prefix 0x000/0xFFF */ -#define MSR_IR_LG 5 /* Instruction Relocate */ -#define MSR_DR_LG 4 /* Data Relocate */ -#define MSR_PE_LG 3 /* Protection Enable */ -#define MSR_PX_LG 2 /* Protection Exclusive Mode */ -#define MSR_PMM_LG 2 /* Performance monitor */ -#define MSR_RI_LG 1 /* Recoverable Exception */ -#define MSR_LE_LG 0 /* Little Endian */ - -#ifdef __ASSEMBLY__ -#define __MASK(X) (1<<(X)) -#else -#define __MASK(X) (1UL<<(X)) -#endif - -#ifdef CONFIG_PPC64 -#define MSR_SF __MASK(MSR_SF_LG) /* Enable 64 bit mode */ -#define MSR_ISF __MASK(MSR_ISF_LG) /* Interrupt 64b mode valid on 630 */ -#define MSR_HV __MASK(MSR_HV_LG) /* Hypervisor state */ -#else -/* so tests for these bits fail on 32-bit */ -#define MSR_SF 0 -#define MSR_ISF 0 -#define MSR_HV 0 -#endif - -#define MSR_VEC __MASK(MSR_VEC_LG) /* Enable AltiVec */ -#define MSR_VSX __MASK(MSR_VSX_LG) /* Enable VSX */ -#define MSR_POW __MASK(MSR_POW_LG) /* Enable Power Management */ -#define MSR_WE __MASK(MSR_WE_LG) /* Wait State Enable */ -#define MSR_TGPR __MASK(MSR_TGPR_LG) /* TLB Update registers in use */ -#define MSR_CE __MASK(MSR_CE_LG) /* Critical Interrupt Enable */ -#define MSR_ILE __MASK(MSR_ILE_LG) /* Interrupt Little Endian */ -#define MSR_EE __MASK(MSR_EE_LG) /* External Interrupt Enable */ -#define MSR_PR __MASK(MSR_PR_LG) /* Problem State / Privilege Level */ -#define MSR_FP __MASK(MSR_FP_LG) /* Floating Point enable */ -#define MSR_ME __MASK(MSR_ME_LG) /* Machine Check Enable */ -#define MSR_FE0 __MASK(MSR_FE0_LG) /* Floating Exception mode 0 */ -#define MSR_SE __MASK(MSR_SE_LG) /* Single Step */ -#define MSR_BE __MASK(MSR_BE_LG) /* Branch Trace */ -#define MSR_DE __MASK(MSR_DE_LG) /* Debug Exception Enable */ -#define MSR_FE1 __MASK(MSR_FE1_LG) /* Floating Exception mode 1 */ -#define MSR_IP __MASK(MSR_IP_LG) /* Exception prefix 0x000/0xFFF */ -#define MSR_IR __MASK(MSR_IR_LG) /* Instruction Relocate */ -#define MSR_DR __MASK(MSR_DR_LG) /* Data Relocate */ -#define MSR_PE __MASK(MSR_PE_LG) /* Protection Enable */ -#define MSR_PX __MASK(MSR_PX_LG) /* Protection Exclusive Mode */ -#ifndef MSR_PMM -#define MSR_PMM __MASK(MSR_PMM_LG) /* Performance monitor */ -#endif -#define MSR_RI __MASK(MSR_RI_LG) /* Recoverable Exception */ -#define MSR_LE __MASK(MSR_LE_LG) /* Little Endian */ - -#ifdef CONFIG_PPC64 -#define MSR_ MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV -#define MSR_KERNEL MSR_ | MSR_SF - -#define MSR_USER32 MSR_ | MSR_PR | MSR_EE -#define MSR_USER64 MSR_USER32 | MSR_SF - -#else /* 32-bit */ -/* Default MSR for kernel mode. */ -#ifndef MSR_KERNEL /* reg_booke.h also defines this */ -#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR) -#endif - -#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) -#endif - -/* Floating Point Status and Control Register (FPSCR) Fields */ -#define FPSCR_FX 0x80000000 /* FPU exception summary */ -#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */ -#define FPSCR_VX 0x20000000 /* Invalid operation summary */ -#define FPSCR_OX 0x10000000 /* Overflow exception summary */ -#define FPSCR_UX 0x08000000 /* Underflow exception summary */ -#define FPSCR_ZX 0x04000000 /* Zero-divide exception summary */ -#define FPSCR_XX 0x02000000 /* Inexact exception summary */ -#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */ -#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */ -#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */ -#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */ -#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */ -#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */ -#define FPSCR_FR 0x00040000 /* Fraction rounded */ -#define FPSCR_FI 0x00020000 /* Fraction inexact */ -#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */ -#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */ -#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */ -#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */ -#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */ -#define FPSCR_VE 0x00000080 /* Invalid op exception enable */ -#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */ -#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */ -#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */ -#define FPSCR_XE 0x00000008 /* FP inexact exception enable */ -#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */ -#define FPSCR_RN 0x00000003 /* FPU rounding control */ - -/* Special Purpose Registers (SPRNs)*/ -#define SPRN_CTR 0x009 /* Count Register */ -#define SPRN_DSCR 0x11 -#define SPRN_CTRLF 0x088 -#define SPRN_CTRLT 0x098 -#define CTRL_CT 0xc0000000 /* current thread */ -#define CTRL_CT0 0x80000000 /* thread 0 */ -#define CTRL_CT1 0x40000000 /* thread 1 */ -#define CTRL_TE 0x00c00000 /* thread enable */ -#define CTRL_RUNLATCH 0x1 -#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */ -#define DABR_TRANSLATION (1UL << 2) -#define SPRN_DABR2 0x13D /* e300 */ -#define SPRN_DABRX 0x3F7 /* Data Address Breakpoint Register Extension */ -#define DABRX_USER (1UL << 0) -#define DABRX_KERNEL (1UL << 1) -#define SPRN_DAR 0x013 /* Data Address Register */ -#define SPRN_DBCR 0x136 /* e300 Data Breakpoint Control Reg */ -#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */ -#define DSISR_NOHPTE 0x40000000 /* no translation found */ -#define DSISR_PROTFAULT 0x08000000 /* protection fault */ -#define DSISR_ISSTORE 0x02000000 /* access was a store */ -#define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */ -#define DSISR_NOSEGMENT 0x00200000 /* STAB/SLB miss */ -#define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */ -#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */ -#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */ -#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */ -#define SPRN_SPURR 0x134 /* Scaled PURR */ -#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */ -#define SPRN_LPCR 0x13E /* LPAR Control Register */ -#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */ -#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */ -#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */ -#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */ -#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */ -#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */ -#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */ -#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */ -#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */ -#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */ -#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */ -#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */ -#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */ -#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */ -#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */ -#define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */ - -#define SPRN_DEC 0x016 /* Decrement Register */ -#define SPRN_DER 0x095 /* Debug Enable Regsiter */ -#define DER_RSTE 0x40000000 /* Reset Interrupt */ -#define DER_CHSTPE 0x20000000 /* Check Stop */ -#define DER_MCIE 0x10000000 /* Machine Check Interrupt */ -#define DER_EXTIE 0x02000000 /* External Interrupt */ -#define DER_ALIE 0x01000000 /* Alignment Interrupt */ -#define DER_PRIE 0x00800000 /* Program Interrupt */ -#define DER_FPUVIE 0x00400000 /* FP Unavailable Interrupt */ -#define DER_DECIE 0x00200000 /* Decrementer Interrupt */ -#define DER_SYSIE 0x00040000 /* System Call Interrupt */ -#define DER_TRE 0x00020000 /* Trace Interrupt */ -#define DER_SEIE 0x00004000 /* FP SW Emulation Interrupt */ -#define DER_ITLBMSE 0x00002000 /* Imp. Spec. Instruction TLB Miss */ -#define DER_ITLBERE 0x00001000 /* Imp. Spec. Instruction TLB Error */ -#define DER_DTLBMSE 0x00000800 /* Imp. Spec. Data TLB Miss */ -#define DER_DTLBERE 0x00000400 /* Imp. Spec. Data TLB Error */ -#define DER_LBRKE 0x00000008 /* Load/Store Breakpoint Interrupt */ -#define DER_IBRKE 0x00000004 /* Instruction Breakpoint Interrupt */ -#define DER_EBRKE 0x00000002 /* External Breakpoint Interrupt */ -#define DER_DPIE 0x00000001 /* Dev. Port Nonmaskable Request */ -#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */ -#define SPRN_EAR 0x11A /* External Address Register */ -#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */ -#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */ -#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */ -#define HID0_EMCP (1<<31) /* Enable Machine Check pin */ -#define HID0_EBA (1<<29) /* Enable Bus Address Parity */ -#define HID0_EBD (1<<28) /* Enable Bus Data Parity */ -#define HID0_SBCLK (1<<27) -#define HID0_EICE (1<<26) -#define HID0_TBEN (1<<26) /* Timebase enable - 745x */ -#define HID0_ECLK (1<<25) -#define HID0_PAR (1<<24) -#define HID0_STEN (1<<24) /* Software table search enable - 745x */ -#define HID0_HIGH_BAT (1<<23) /* Enable high BATs - 7455 */ -#define HID0_DOZE (1<<23) -#define HID0_NAP (1<<22) -#define HID0_SLEEP (1<<21) -#define HID0_DPM (1<<20) -#define HID0_BHTCLR (1<<18) /* Clear branch history table - 7450 */ -#define HID0_XAEN (1<<17) /* Extended addressing enable - 7450 */ -#define HID0_NHR (1<<16) /* Not hard reset (software bit-7450)*/ -#define HID0_ICE (1<<15) /* Instruction Cache Enable */ -#define HID0_DCE (1<<14) /* Data Cache Enable */ -#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */ -#define HID0_DLOCK (1<<12) /* Data Cache Lock */ -#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */ -#define HID0_DCI (1<<10) /* Data Cache Invalidate */ -#define HID0_SPD (1<<9) /* Speculative disable */ -#define HID0_DAPUEN (1<<8) /* Debug APU enable */ -#define HID0_SGE (1<<7) /* Store Gathering Enable */ -#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */ -#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */ -#define HID0_LRSTK (1<<4) /* Link register stack - 745x */ -#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */ -#define HID0_ABE (1<<3) /* Address Broadcast Enable */ -#define HID0_FOLD (1<<3) /* Branch Folding enable - 745x */ -#define HID0_BHTE (1<<2) /* Branch History Table Enable */ -#define HID0_BTCD (1<<1) /* Branch target cache disable */ -#define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */ -#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */ - -#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */ -#define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */ -#define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */ -#define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */ -#define HID1_PC1 (1<<15) /* 7450 PLL_CFG[1] */ -#define HID1_PC2 (1<<14) /* 7450 PLL_CFG[2] */ -#define HID1_PC3 (1<<13) /* 7450 PLL_CFG[3] */ -#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */ -#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */ -#define HID1_PS (1<<16) /* 750FX PLL selection */ -#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */ -#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */ -#define SPRN_IABR2 0x3FA /* 83xx */ -#define SPRN_IBCR 0x135 /* 83xx Insn Breakpoint Control Reg */ -#define SPRN_HID4 0x3F4 /* 970 HID4 */ -#define SPRN_HID5 0x3F6 /* 970 HID5 */ -#define SPRN_HID6 0x3F9 /* BE HID 6 */ -#define HID6_LB (0x0F<<12) /* Concurrent Large Page Modes */ -#define HID6_DLP (1<<20) /* Disable all large page modes (4K only) */ -#define SPRN_TSC_CELL 0x399 /* Thread switch control on Cell */ -#define TSC_CELL_DEC_ENABLE_0 0x400000 /* Decrementer Interrupt */ -#define TSC_CELL_DEC_ENABLE_1 0x200000 /* Decrementer Interrupt */ -#define TSC_CELL_EE_ENABLE 0x100000 /* External Interrupt */ -#define TSC_CELL_EE_BOOST 0x080000 /* External Interrupt Boost */ -#define SPRN_TSC 0x3FD /* Thread switch control on others */ -#define SPRN_TST 0x3FC /* Thread switch timeout on others */ -#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2) -#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */ -#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */ -#endif -#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */ -#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */ -#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */ -#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */ -#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */ -#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */ -#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */ -#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */ -#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */ -#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */ -#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */ -#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */ -#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */ -#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */ -#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */ -#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */ -#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */ -#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */ -#define SPRN_ICTRL 0x3F3 /* 1011 7450 icache and interrupt ctrl */ -#define ICTRL_EICE 0x08000000 /* enable icache parity errs */ -#define ICTRL_EDC 0x04000000 /* enable dcache parity errs */ -#define ICTRL_EICP 0x00000100 /* enable icache par. check */ -#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */ -#define SPRN_IMMR 0x27E /* Internal Memory Map Register */ -#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */ -#define SPRN_L2CR2 0x3f8 -#define L2CR_L2E 0x80000000 /* L2 enable */ -#define L2CR_L2PE 0x40000000 /* L2 parity enable */ -#define L2CR_L2SIZ_MASK 0x30000000 /* L2 size mask */ -#define L2CR_L2SIZ_256KB 0x10000000 /* L2 size 256KB */ -#define L2CR_L2SIZ_512KB 0x20000000 /* L2 size 512KB */ -#define L2CR_L2SIZ_1MB 0x30000000 /* L2 size 1MB */ -#define L2CR_L2CLK_MASK 0x0e000000 /* L2 clock mask */ -#define L2CR_L2CLK_DISABLED 0x00000000 /* L2 clock disabled */ -#define L2CR_L2CLK_DIV1 0x02000000 /* L2 clock / 1 */ -#define L2CR_L2CLK_DIV1_5 0x04000000 /* L2 clock / 1.5 */ -#define L2CR_L2CLK_DIV2 0x08000000 /* L2 clock / 2 */ -#define L2CR_L2CLK_DIV2_5 0x0a000000 /* L2 clock / 2.5 */ -#define L2CR_L2CLK_DIV3 0x0c000000 /* L2 clock / 3 */ -#define L2CR_L2RAM_MASK 0x01800000 /* L2 RAM type mask */ -#define L2CR_L2RAM_FLOW 0x00000000 /* L2 RAM flow through */ -#define L2CR_L2RAM_PIPE 0x01000000 /* L2 RAM pipelined */ -#define L2CR_L2RAM_PIPE_LW 0x01800000 /* L2 RAM pipelined latewr */ -#define L2CR_L2DO 0x00400000 /* L2 data only */ -#define L2CR_L2I 0x00200000 /* L2 global invalidate */ -#define L2CR_L2CTL 0x00100000 /* L2 RAM control */ -#define L2CR_L2WT 0x00080000 /* L2 write-through */ -#define L2CR_L2TS 0x00040000 /* L2 test support */ -#define L2CR_L2OH_MASK 0x00030000 /* L2 output hold mask */ -#define L2CR_L2OH_0_5 0x00000000 /* L2 output hold 0.5 ns */ -#define L2CR_L2OH_1_0 0x00010000 /* L2 output hold 1.0 ns */ -#define L2CR_L2SL 0x00008000 /* L2 DLL slow */ -#define L2CR_L2DF 0x00004000 /* L2 differential clock */ -#define L2CR_L2BYP 0x00002000 /* L2 DLL bypass */ -#define L2CR_L2IP 0x00000001 /* L2 GI in progress */ -#define L2CR_L2IO_745x 0x00100000 /* L2 instr. only (745x) */ -#define L2CR_L2DO_745x 0x00010000 /* L2 data only (745x) */ -#define L2CR_L2REP_745x 0x00001000 /* L2 repl. algorithm (745x) */ -#define L2CR_L2HWF_745x 0x00000800 /* L2 hardware flush (745x) */ -#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Regsiter */ -#define L3CR_L3E 0x80000000 /* L3 enable */ -#define L3CR_L3PE 0x40000000 /* L3 data parity enable */ -#define L3CR_L3APE 0x20000000 /* L3 addr parity enable */ -#define L3CR_L3SIZ 0x10000000 /* L3 size */ -#define L3CR_L3CLKEN 0x08000000 /* L3 clock enable */ -#define L3CR_L3RES 0x04000000 /* L3 special reserved bit */ -#define L3CR_L3CLKDIV 0x03800000 /* L3 clock divisor */ -#define L3CR_L3IO 0x00400000 /* L3 instruction only */ -#define L3CR_L3SPO 0x00040000 /* L3 sample point override */ -#define L3CR_L3CKSP 0x00030000 /* L3 clock sample point */ -#define L3CR_L3PSP 0x0000e000 /* L3 P-clock sample point */ -#define L3CR_L3REP 0x00001000 /* L3 replacement algorithm */ -#define L3CR_L3HWF 0x00000800 /* L3 hardware flush */ -#define L3CR_L3I 0x00000400 /* L3 global invalidate */ -#define L3CR_L3RT 0x00000300 /* L3 SRAM type */ -#define L3CR_L3NIRCA 0x00000080 /* L3 non-integer ratio clock adj. */ -#define L3CR_L3DO 0x00000040 /* L3 data only mode */ -#define L3CR_PMEN 0x00000004 /* L3 private memory enable */ -#define L3CR_PMSIZ 0x00000001 /* L3 private memory size */ - -#define SPRN_MSSCR0 0x3f6 /* Memory Subsystem Control Register 0 */ -#define SPRN_MSSSR0 0x3f7 /* Memory Subsystem Status Register 1 */ -#define SPRN_LDSTCR 0x3f8 /* Load/Store control register */ -#define SPRN_LDSTDB 0x3f4 /* */ -#define SPRN_LR 0x008 /* Link Register */ -#ifndef SPRN_PIR -#define SPRN_PIR 0x3FF /* Processor Identification Register */ -#endif -#define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */ -#define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */ -#define SPRN_PURR 0x135 /* Processor Utilization of Resources Reg */ -#define SPRN_PVR 0x11F /* Processor Version Register */ -#define SPRN_RPA 0x3D6 /* Required Physical Address Register */ -#define SPRN_SDA 0x3BF /* Sampled Data Address Register */ -#define SPRN_SDR1 0x019 /* MMU Hash Base Register */ -#define SPRN_ASR 0x118 /* Address Space Register */ -#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */ -#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */ -#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */ -#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */ -#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */ -#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */ -#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */ -#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */ -#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */ -#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */ -#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */ -#define SRR1_WAKEMASK 0x00380000 /* reason for wakeup */ -#define SRR1_WAKERESET 0x00380000 /* System reset */ -#define SRR1_WAKESYSERR 0x00300000 /* System error */ -#define SRR1_WAKEEE 0x00200000 /* External interrupt */ -#define SRR1_WAKEMT 0x00280000 /* mtctrl */ -#define SRR1_WAKEDEC 0x00180000 /* Decrementer interrupt */ -#define SRR1_WAKETHERM 0x00100000 /* Thermal management interrupt */ -#define SPRN_HSRR0 0x13A /* Save/Restore Register 0 */ -#define SPRN_HSRR1 0x13B /* Save/Restore Register 1 */ - -#define SPRN_TBCTL 0x35f /* PA6T Timebase control register */ -#define TBCTL_FREEZE 0x0000000000000000ull /* Freeze all tbs */ -#define TBCTL_RESTART 0x0000000100000000ull /* Restart all tbs */ -#define TBCTL_UPDATE_UPPER 0x0000000200000000ull /* Set upper 32 bits */ -#define TBCTL_UPDATE_LOWER 0x0000000300000000ull /* Set lower 32 bits */ - -#ifndef SPRN_SVR -#define SPRN_SVR 0x11E /* System Version Register */ -#endif -#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */ -/* these bits were defined in inverted endian sense originally, ugh, confusing */ -#define THRM1_TIN (1 << 31) -#define THRM1_TIV (1 << 30) -#define THRM1_THRES(x) ((x&0x7f)<<23) -#define THRM3_SITV(x) ((x&0x3fff)<<1) -#define THRM1_TID (1<<2) -#define THRM1_TIE (1<<1) -#define THRM1_V (1<<0) -#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */ -#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */ -#define THRM3_E (1<<0) -#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */ -#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */ -#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */ -#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */ -#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */ -#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */ -#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */ -#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */ -#define SPRN_VRSAVE 0x100 /* Vector Register Save Register */ -#define SPRN_XER 0x001 /* Fixed Point Exception Register */ - -#define SPRN_SCOMC 0x114 /* SCOM Access Control */ -#define SPRN_SCOMD 0x115 /* SCOM Access DATA */ - -/* Performance monitor SPRs */ -#ifdef CONFIG_PPC64 -#define SPRN_MMCR0 795 -#define MMCR0_FC 0x80000000UL /* freeze counters */ -#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */ -#define MMCR0_KERNEL_DISABLE MMCR0_FCS -#define MMCR0_FCP 0x20000000UL /* freeze in problem state */ -#define MMCR0_PROBLEM_DISABLE MMCR0_FCP -#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */ -#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */ -#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */ -#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */ -#define MMCR0_TBEE 0x00400000UL /* time base exception enable */ -#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/ -#define MMCR0_PMCjCE 0x00004000UL /* PMCj count enable*/ -#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */ -#define MMCR0_PMAO 0x00000080UL /* performance monitor alert has occurred, set to 0 after handling exception */ -#define MMCR0_SHRFC 0x00000040UL /* SHRre freeze conditions between threads */ -#define MMCR0_FCTI 0x00000008UL /* freeze counters in tags inactive mode */ -#define MMCR0_FCTA 0x00000004UL /* freeze counters in tags active mode */ -#define MMCR0_FCWAIT 0x00000002UL /* freeze counter in WAIT state */ -#define MMCR0_FCHV 0x00000001UL /* freeze conditions in hypervisor mode */ -#define SPRN_MMCR1 798 -#define SPRN_MMCRA 0x312 -#define MMCRA_SIHV 0x10000000UL /* state of MSR HV when SIAR set */ -#define MMCRA_SIPR 0x08000000UL /* state of MSR PR when SIAR set */ -#define MMCRA_SLOT 0x07000000UL /* SLOT bits (37-39) */ -#define MMCRA_SLOT_SHIFT 24 -#define MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */ -#define POWER6_MMCRA_SIHV 0x0000040000000000ULL -#define POWER6_MMCRA_SIPR 0x0000020000000000ULL -#define POWER6_MMCRA_THRM 0x00000020UL -#define POWER6_MMCRA_OTHER 0x0000000EUL -#define SPRN_PMC1 787 -#define SPRN_PMC2 788 -#define SPRN_PMC3 789 -#define SPRN_PMC4 790 -#define SPRN_PMC5 791 -#define SPRN_PMC6 792 -#define SPRN_PMC7 793 -#define SPRN_PMC8 794 -#define SPRN_SIAR 780 -#define SPRN_SDAR 781 - -#define SPRN_PA6T_MMCR0 795 -#define PA6T_MMCR0_EN0 0x0000000000000001UL -#define PA6T_MMCR0_EN1 0x0000000000000002UL -#define PA6T_MMCR0_EN2 0x0000000000000004UL -#define PA6T_MMCR0_EN3 0x0000000000000008UL -#define PA6T_MMCR0_EN4 0x0000000000000010UL -#define PA6T_MMCR0_EN5 0x0000000000000020UL -#define PA6T_MMCR0_SUPEN 0x0000000000000040UL -#define PA6T_MMCR0_PREN 0x0000000000000080UL -#define PA6T_MMCR0_HYPEN 0x0000000000000100UL -#define PA6T_MMCR0_FCM0 0x0000000000000200UL -#define PA6T_MMCR0_FCM1 0x0000000000000400UL -#define PA6T_MMCR0_INTGEN 0x0000000000000800UL -#define PA6T_MMCR0_INTEN0 0x0000000000001000UL -#define PA6T_MMCR0_INTEN1 0x0000000000002000UL -#define PA6T_MMCR0_INTEN2 0x0000000000004000UL -#define PA6T_MMCR0_INTEN3 0x0000000000008000UL -#define PA6T_MMCR0_INTEN4 0x0000000000010000UL -#define PA6T_MMCR0_INTEN5 0x0000000000020000UL -#define PA6T_MMCR0_DISCNT 0x0000000000040000UL -#define PA6T_MMCR0_UOP 0x0000000000080000UL -#define PA6T_MMCR0_TRG 0x0000000000100000UL -#define PA6T_MMCR0_TRGEN 0x0000000000200000UL -#define PA6T_MMCR0_TRGREG 0x0000000001600000UL -#define PA6T_MMCR0_SIARLOG 0x0000000002000000UL -#define PA6T_MMCR0_SDARLOG 0x0000000004000000UL -#define PA6T_MMCR0_PROEN 0x0000000008000000UL -#define PA6T_MMCR0_PROLOG 0x0000000010000000UL -#define PA6T_MMCR0_DAMEN2 0x0000000020000000UL -#define PA6T_MMCR0_DAMEN3 0x0000000040000000UL -#define PA6T_MMCR0_DAMEN4 0x0000000080000000UL -#define PA6T_MMCR0_DAMEN5 0x0000000100000000UL -#define PA6T_MMCR0_DAMSEL2 0x0000000200000000UL -#define PA6T_MMCR0_DAMSEL3 0x0000000400000000UL -#define PA6T_MMCR0_DAMSEL4 0x0000000800000000UL -#define PA6T_MMCR0_DAMSEL5 0x0000001000000000UL -#define PA6T_MMCR0_HANDDIS 0x0000002000000000UL -#define PA6T_MMCR0_PCTEN 0x0000004000000000UL -#define PA6T_MMCR0_SOCEN 0x0000008000000000UL -#define PA6T_MMCR0_SOCMOD 0x0000010000000000UL - -#define SPRN_PA6T_MMCR1 798 -#define PA6T_MMCR1_ES2 0x00000000000000ffUL -#define PA6T_MMCR1_ES3 0x000000000000ff00UL -#define PA6T_MMCR1_ES4 0x0000000000ff0000UL -#define PA6T_MMCR1_ES5 0x00000000ff000000UL - -#define SPRN_PA6T_UPMC0 771 /* User PerfMon Counter 0 */ -#define SPRN_PA6T_UPMC1 772 /* ... */ -#define SPRN_PA6T_UPMC2 773 -#define SPRN_PA6T_UPMC3 774 -#define SPRN_PA6T_UPMC4 775 -#define SPRN_PA6T_UPMC5 776 -#define SPRN_PA6T_UMMCR0 779 /* User Monitor Mode Control Register 0 */ -#define SPRN_PA6T_SIAR 780 /* Sampled Instruction Address */ -#define SPRN_PA6T_UMMCR1 782 /* User Monitor Mode Control Register 1 */ -#define SPRN_PA6T_SIER 785 /* Sampled Instruction Event Register */ -#define SPRN_PA6T_PMC0 787 -#define SPRN_PA6T_PMC1 788 -#define SPRN_PA6T_PMC2 789 -#define SPRN_PA6T_PMC3 790 -#define SPRN_PA6T_PMC4 791 -#define SPRN_PA6T_PMC5 792 -#define SPRN_PA6T_TSR0 793 /* Timestamp Register 0 */ -#define SPRN_PA6T_TSR1 794 /* Timestamp Register 1 */ -#define SPRN_PA6T_TSR2 799 /* Timestamp Register 2 */ -#define SPRN_PA6T_TSR3 784 /* Timestamp Register 3 */ - -#define SPRN_PA6T_IER 981 /* Icache Error Register */ -#define SPRN_PA6T_DER 982 /* Dcache Error Register */ -#define SPRN_PA6T_BER 862 /* BIU Error Address Register */ -#define SPRN_PA6T_MER 849 /* MMU Error Register */ - -#define SPRN_PA6T_IMA0 880 /* Instruction Match Array 0 */ -#define SPRN_PA6T_IMA1 881 /* ... */ -#define SPRN_PA6T_IMA2 882 -#define SPRN_PA6T_IMA3 883 -#define SPRN_PA6T_IMA4 884 -#define SPRN_PA6T_IMA5 885 -#define SPRN_PA6T_IMA6 886 -#define SPRN_PA6T_IMA7 887 -#define SPRN_PA6T_IMA8 888 -#define SPRN_PA6T_IMA9 889 -#define SPRN_PA6T_BTCR 978 /* Breakpoint and Tagging Control Register */ -#define SPRN_PA6T_IMAAT 979 /* Instruction Match Array Action Table */ -#define SPRN_PA6T_PCCR 1019 /* Power Counter Control Register */ -#define SPRN_BKMK 1020 /* Cell Bookmark Register */ -#define SPRN_PA6T_RPCCR 1021 /* Retire PC Trace Control Register */ - - -#else /* 32-bit */ -#define SPRN_MMCR0 952 /* Monitor Mode Control Register 0 */ -#define MMCR0_FC 0x80000000UL /* freeze counters */ -#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */ -#define MMCR0_FCP 0x20000000UL /* freeze in problem state */ -#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */ -#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */ -#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */ -#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */ -#define MMCR0_TBEE 0x00400000UL /* time base exception enable */ -#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/ -#define MMCR0_PMCnCE 0x00004000UL /* count enable for all but PMC 1*/ -#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */ -#define MMCR0_PMC1SEL 0x00001fc0UL /* PMC 1 Event */ -#define MMCR0_PMC2SEL 0x0000003fUL /* PMC 2 Event */ - -#define SPRN_MMCR1 956 -#define MMCR1_PMC3SEL 0xf8000000UL /* PMC 3 Event */ -#define MMCR1_PMC4SEL 0x07c00000UL /* PMC 4 Event */ -#define MMCR1_PMC5SEL 0x003e0000UL /* PMC 5 Event */ -#define MMCR1_PMC6SEL 0x0001f800UL /* PMC 6 Event */ -#define SPRN_MMCR2 944 -#define SPRN_PMC1 953 /* Performance Counter Register 1 */ -#define SPRN_PMC2 954 /* Performance Counter Register 2 */ -#define SPRN_PMC3 957 /* Performance Counter Register 3 */ -#define SPRN_PMC4 958 /* Performance Counter Register 4 */ -#define SPRN_PMC5 945 /* Performance Counter Register 5 */ -#define SPRN_PMC6 946 /* Performance Counter Register 6 */ - -#define SPRN_SIAR 955 /* Sampled Instruction Address Register */ - -/* Bit definitions for MMCR0 and PMC1 / PMC2. */ -#define MMCR0_PMC1_CYCLES (1 << 7) -#define MMCR0_PMC1_ICACHEMISS (5 << 7) -#define MMCR0_PMC1_DTLB (6 << 7) -#define MMCR0_PMC2_DCACHEMISS 0x6 -#define MMCR0_PMC2_CYCLES 0x1 -#define MMCR0_PMC2_ITLB 0x7 -#define MMCR0_PMC2_LOADMISSTIME 0x5 -#endif - -/* - * An mtfsf instruction with the L bit set. On CPUs that support this a - * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored. - * - * Until binutils gets the new form of mtfsf, hardwire the instruction. - */ -#ifdef CONFIG_PPC64 -#define MTFSF_L(REG) \ - .long (0xfc00058e | ((0xff) << 17) | ((REG) << 11) | (1 << 25)) -#else -#define MTFSF_L(REG) mtfsf 0xff, (REG) -#endif - -/* Processor Version Register (PVR) field extraction */ - -#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */ -#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */ - -#define __is_processor(pv) (PVR_VER(mfspr(SPRN_PVR)) == (pv)) - -/* - * IBM has further subdivided the standard PowerPC 16-bit version and - * revision subfields of the PVR for the PowerPC 403s into the following: - */ - -#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */ -#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */ -#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */ -#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */ -#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */ -#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */ - -/* Processor Version Numbers */ - -#define PVR_403GA 0x00200000 -#define PVR_403GB 0x00200100 -#define PVR_403GC 0x00200200 -#define PVR_403GCX 0x00201400 -#define PVR_405GP 0x40110000 -#define PVR_STB03XXX 0x40310000 -#define PVR_NP405H 0x41410000 -#define PVR_NP405L 0x41610000 -#define PVR_601 0x00010000 -#define PVR_602 0x00050000 -#define PVR_603 0x00030000 -#define PVR_603e 0x00060000 -#define PVR_603ev 0x00070000 -#define PVR_603r 0x00071000 -#define PVR_604 0x00040000 -#define PVR_604e 0x00090000 -#define PVR_604r 0x000A0000 -#define PVR_620 0x00140000 -#define PVR_740 0x00080000 -#define PVR_750 PVR_740 -#define PVR_740P 0x10080000 -#define PVR_750P PVR_740P -#define PVR_7400 0x000C0000 -#define PVR_7410 0x800C0000 -#define PVR_7450 0x80000000 -#define PVR_8540 0x80200000 -#define PVR_8560 0x80200000 -/* - * For the 8xx processors, all of them report the same PVR family for - * the PowerPC core. The various versions of these processors must be - * differentiated by the version number in the Communication Processor - * Module (CPM). - */ -#define PVR_821 0x00500000 -#define PVR_823 PVR_821 -#define PVR_850 PVR_821 -#define PVR_860 PVR_821 -#define PVR_8240 0x00810100 -#define PVR_8245 0x80811014 -#define PVR_8260 PVR_8240 - -/* 64-bit processors */ -/* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */ -#define PV_NORTHSTAR 0x0033 -#define PV_PULSAR 0x0034 -#define PV_POWER4 0x0035 -#define PV_ICESTAR 0x0036 -#define PV_SSTAR 0x0037 -#define PV_POWER4p 0x0038 -#define PV_970 0x0039 -#define PV_POWER5 0x003A -#define PV_POWER5p 0x003B -#define PV_970FX 0x003C -#define PV_630 0x0040 -#define PV_630p 0x0041 -#define PV_970MP 0x0044 -#define PV_970GX 0x0045 -#define PV_BE 0x0070 -#define PV_PA6T 0x0090 - -/* Macros for setting and retrieving special purpose registers */ -#ifndef __ASSEMBLY__ -#define mfmsr() ({unsigned long rval; \ - asm volatile("mfmsr %0" : "=r" (rval)); rval;}) -#ifdef CONFIG_PPC64 -#define __mtmsrd(v, l) asm volatile("mtmsrd %0," __stringify(l) \ - : : "r" (v)) -#define mtmsrd(v) __mtmsrd((v), 0) -#define mtmsr(v) mtmsrd(v) -#else -#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v)) -#endif - -#define mfspr(rn) ({unsigned long rval; \ - asm volatile("mfspr %0," __stringify(rn) \ - : "=r" (rval)); rval;}) -#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v)) - -#ifdef __powerpc64__ -#ifdef CONFIG_PPC_CELL -#define mftb() ({unsigned long rval; \ - asm volatile( \ - "90: mftb %0;\n" \ - "97: cmpwi %0,0;\n" \ - " beq- 90b;\n" \ - "99:\n" \ - ".section __ftr_fixup,\"a\"\n" \ - ".align 3\n" \ - "98:\n" \ - " .llong %1\n" \ - " .llong %1\n" \ - " .llong 97b-98b\n" \ - " .llong 99b-98b\n" \ - " .llong 0\n" \ - " .llong 0\n" \ - ".previous" \ - : "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;}) -#else -#define mftb() ({unsigned long rval; \ - asm volatile("mftb %0" : "=r" (rval)); rval;}) -#endif /* !CONFIG_PPC_CELL */ - -#else /* __powerpc64__ */ - -#define mftbl() ({unsigned long rval; \ - asm volatile("mftbl %0" : "=r" (rval)); rval;}) -#define mftbu() ({unsigned long rval; \ - asm volatile("mftbu %0" : "=r" (rval)); rval;}) -#endif /* !__powerpc64__ */ - -#define mttbl(v) asm volatile("mttbl %0":: "r"(v)) -#define mttbu(v) asm volatile("mttbu %0":: "r"(v)) - -#ifdef CONFIG_PPC32 -#define mfsrin(v) ({unsigned int rval; \ - asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \ - rval;}) -#endif - -#define proc_trap() asm volatile("trap") - -#ifdef CONFIG_PPC64 - -extern void ppc64_runlatch_on(void); -extern void ppc64_runlatch_off(void); - -extern unsigned long scom970_read(unsigned int address); -extern void scom970_write(unsigned int address, unsigned long value); - -#else -#define ppc64_runlatch_on() -#define ppc64_runlatch_off() - -#endif /* CONFIG_PPC64 */ - -#define __get_SP() ({unsigned long sp; \ - asm volatile("mr %0,1": "=r" (sp)); sp;}) - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_REG_H */ diff --git a/include/asm-powerpc/reg_8xx.h b/include/asm-powerpc/reg_8xx.h deleted file mode 100644 index e8ea346b21d3..000000000000 --- a/include/asm-powerpc/reg_8xx.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Contains register definitions common to PowerPC 8xx CPUs. Notice - */ -#ifndef _ASM_POWERPC_REG_8xx_H -#define _ASM_POWERPC_REG_8xx_H - -/* Cache control on the MPC8xx is provided through some additional - * special purpose registers. - */ -#define SPRN_IC_CST 560 /* Instruction cache control/status */ -#define SPRN_IC_ADR 561 /* Address needed for some commands */ -#define SPRN_IC_DAT 562 /* Read-only data register */ -#define SPRN_DC_CST 568 /* Data cache control/status */ -#define SPRN_DC_ADR 569 /* Address needed for some commands */ -#define SPRN_DC_DAT 570 /* Read-only data register */ - -/* Commands. Only the first few are available to the instruction cache. -*/ -#define IDC_ENABLE 0x02000000 /* Cache enable */ -#define IDC_DISABLE 0x04000000 /* Cache disable */ -#define IDC_LDLCK 0x06000000 /* Load and lock */ -#define IDC_UNLINE 0x08000000 /* Unlock line */ -#define IDC_UNALL 0x0a000000 /* Unlock all */ -#define IDC_INVALL 0x0c000000 /* Invalidate all */ - -#define DC_FLINE 0x0e000000 /* Flush data cache line */ -#define DC_SFWT 0x01000000 /* Set forced writethrough mode */ -#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */ -#define DC_SLES 0x05000000 /* Set little endian swap mode */ -#define DC_CLES 0x07000000 /* Clear little endian swap mode */ - -/* Status. -*/ -#define IDC_ENABLED 0x80000000 /* Cache is enabled */ -#define IDC_CERR1 0x00200000 /* Cache error 1 */ -#define IDC_CERR2 0x00100000 /* Cache error 2 */ -#define IDC_CERR3 0x00080000 /* Cache error 3 */ - -#define DC_DFWT 0x40000000 /* Data cache is forced write through */ -#define DC_LES 0x20000000 /* Caches are little endian mode */ - -#endif /* _ASM_POWERPC_REG_8xx_H */ diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h deleted file mode 100644 index be980f4ee495..000000000000 --- a/include/asm-powerpc/reg_booke.h +++ /dev/null @@ -1,501 +0,0 @@ -/* - * Contains register definitions common to the Book E PowerPC - * specification. Notice that while the IBM-40x series of CPUs - * are not true Book E PowerPCs, they borrowed a number of features - * before Book E was finalized, and are included here as well. Unfortunatly, - * they sometimes used different locations than true Book E CPUs did. - */ -#ifdef __KERNEL__ -#ifndef __ASM_POWERPC_REG_BOOKE_H__ -#define __ASM_POWERPC_REG_BOOKE_H__ - -/* Machine State Register (MSR) Fields */ -#define MSR_UCLE (1<<26) /* User-mode cache lock enable */ -#define MSR_SPE (1<<25) /* Enable SPE */ -#define MSR_DWE (1<<10) /* Debug Wait Enable */ -#define MSR_UBLE (1<<10) /* BTB lock enable (e500) */ -#define MSR_IS MSR_IR /* Instruction Space */ -#define MSR_DS MSR_DR /* Data Space */ -#define MSR_PMM (1<<2) /* Performance monitor mark bit */ - -/* Default MSR for kernel mode. */ -#if defined (CONFIG_40x) -#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE) -#elif defined(CONFIG_BOOKE) -#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE) -#endif - -/* Special Purpose Registers (SPRNs)*/ -#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */ -#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */ -#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */ -#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */ -#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */ -#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */ -#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */ -#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */ -#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */ -#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */ -#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */ -#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */ -#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */ -#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */ -#define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */ -#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */ -#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */ -#define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */ -#define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */ -#define SPRN_IVOR3 0x193 /* Interrupt Vector Offset Register 3 */ -#define SPRN_IVOR4 0x194 /* Interrupt Vector Offset Register 4 */ -#define SPRN_IVOR5 0x195 /* Interrupt Vector Offset Register 5 */ -#define SPRN_IVOR6 0x196 /* Interrupt Vector Offset Register 6 */ -#define SPRN_IVOR7 0x197 /* Interrupt Vector Offset Register 7 */ -#define SPRN_IVOR8 0x198 /* Interrupt Vector Offset Register 8 */ -#define SPRN_IVOR9 0x199 /* Interrupt Vector Offset Register 9 */ -#define SPRN_IVOR10 0x19A /* Interrupt Vector Offset Register 10 */ -#define SPRN_IVOR11 0x19B /* Interrupt Vector Offset Register 11 */ -#define SPRN_IVOR12 0x19C /* Interrupt Vector Offset Register 12 */ -#define SPRN_IVOR13 0x19D /* Interrupt Vector Offset Register 13 */ -#define SPRN_IVOR14 0x19E /* Interrupt Vector Offset Register 14 */ -#define SPRN_IVOR15 0x19F /* Interrupt Vector Offset Register 15 */ -#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */ -#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */ -#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */ -#define SPRN_L1CFG0 0x203 /* L1 Cache Configure Register 0 */ -#define SPRN_L1CFG1 0x204 /* L1 Cache Configure Register 1 */ -#define SPRN_ATB 0x20E /* Alternate Time Base */ -#define SPRN_ATBL 0x20E /* Alternate Time Base Lower */ -#define SPRN_ATBU 0x20F /* Alternate Time Base Upper */ -#define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */ -#define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */ -#define SPRN_IVOR34 0x212 /* Interrupt Vector Offset Register 34 */ -#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */ -#define SPRN_IVOR36 0x214 /* Interrupt Vector Offset Register 36 */ -#define SPRN_IVOR37 0x215 /* Interrupt Vector Offset Register 37 */ -#define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */ -#define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */ -#define SPRN_MCSR 0x23C /* Machine Check Status Register */ -#define SPRN_MCAR 0x23D /* Machine Check Address Register */ -#define SPRN_DSRR0 0x23E /* Debug Save and Restore Register 0 */ -#define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */ -#define SPRN_SPRG8 0x25C /* Special Purpose Register General 8 */ -#define SPRN_SPRG9 0x25D /* Special Purpose Register General 9 */ -#define SPRN_L1CSR2 0x25E /* L1 Cache Control and Status Register 2 */ -#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */ -#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */ -#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */ -#define SPRN_MAS3 0x273 /* MMU Assist Register 3 */ -#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */ -#define SPRN_MAS5 0x275 /* MMU Assist Register 5 */ -#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */ -#define SPRN_PID1 0x279 /* Process ID Register 1 */ -#define SPRN_PID2 0x27A /* Process ID Register 2 */ -#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */ -#define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */ -#define SPRN_EPR 0x2BE /* External Proxy Register */ -#define SPRN_CCR1 0x378 /* Core Configuration Register 1 */ -#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */ -#define SPRN_MAS7 0x3B0 /* MMU Assist Register 7 */ -#define SPRN_MMUCR 0x3B2 /* MMU Control Register */ -#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */ -#define SPRN_EPLC 0x3B3 /* External Process ID Load Context */ -#define SPRN_EPSC 0x3B4 /* External Process ID Store Context */ -#define SPRN_SGR 0x3B9 /* Storage Guarded Register */ -#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */ -#define SPRN_SLER 0x3BB /* Little-endian real mode */ -#define SPRN_SU0R 0x3BC /* "User 0" real mode (40x) */ -#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */ -#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */ -#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */ -#define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */ -#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */ -#define SPRN_PIT 0x3DB /* Programmable Interval Timer */ -#define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */ -#define SPRN_L2CSR0 0x3F9 /* L2 Data Cache Control and Status Register 0 */ -#define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */ -#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */ -#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */ -#define SPRN_SVR 0x3FF /* System Version Register */ - -/* - * SPRs which have conflicting definitions on true Book E versus classic, - * or IBM 40x. - */ -#ifdef CONFIG_BOOKE -#define SPRN_PID 0x030 /* Process ID */ -#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */ -#define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */ -#define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */ -#define SPRN_DEAR 0x03D /* Data Error Address Register */ -#define SPRN_ESR 0x03E /* Exception Syndrome Register */ -#define SPRN_PIR 0x11E /* Processor Identification Register */ -#define SPRN_DBSR 0x130 /* Debug Status Register */ -#define SPRN_DBCR0 0x134 /* Debug Control Register 0 */ -#define SPRN_DBCR1 0x135 /* Debug Control Register 1 */ -#define SPRN_IAC1 0x138 /* Instruction Address Compare 1 */ -#define SPRN_IAC2 0x139 /* Instruction Address Compare 2 */ -#define SPRN_DAC1 0x13C /* Data Address Compare 1 */ -#define SPRN_DAC2 0x13D /* Data Address Compare 2 */ -#define SPRN_TSR 0x150 /* Timer Status Register */ -#define SPRN_TCR 0x154 /* Timer Control Register */ -#endif /* Book E */ -#ifdef CONFIG_40x -#define SPRN_PID 0x3B1 /* Process ID */ -#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */ -#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */ -#define SPRN_DEAR 0x3D5 /* Data Error Address Register */ -#define SPRN_TSR 0x3D8 /* Timer Status Register */ -#define SPRN_TCR 0x3DA /* Timer Control Register */ -#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */ -#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */ -#define SPRN_DBSR 0x3F0 /* Debug Status Register */ -#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */ -#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */ -#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */ -#define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */ -#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */ -#endif - -/* Bit definitions for CCR1. */ -#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */ -#define CCR1_TCS 0x00000080 /* Timer Clock Select */ - -/* Bit definitions for the MCSR. */ -#define MCSR_MCS 0x80000000 /* Machine Check Summary */ -#define MCSR_IB 0x40000000 /* Instruction PLB Error */ -#define MCSR_DRB 0x20000000 /* Data Read PLB Error */ -#define MCSR_DWB 0x10000000 /* Data Write PLB Error */ -#define MCSR_TLBP 0x08000000 /* TLB Parity Error */ -#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */ -#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */ -#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */ -#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */ - -#ifdef CONFIG_E500 -#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */ -#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */ -#define MCSR_DCP_PERR 0x20000000UL /* D-Cache Push Parity Error */ -#define MCSR_DCPERR 0x10000000UL /* D-Cache Parity Error */ -#define MCSR_BUS_IAERR 0x00000080UL /* Instruction Address Error */ -#define MCSR_BUS_RAERR 0x00000040UL /* Read Address Error */ -#define MCSR_BUS_WAERR 0x00000020UL /* Write Address Error */ -#define MCSR_BUS_IBERR 0x00000010UL /* Instruction Data Error */ -#define MCSR_BUS_RBERR 0x00000008UL /* Read Data Bus Error */ -#define MCSR_BUS_WBERR 0x00000004UL /* Write Data Bus Error */ -#define MCSR_BUS_IPERR 0x00000002UL /* Instruction parity Error */ -#define MCSR_BUS_RPERR 0x00000001UL /* Read parity Error */ - -/* e500 parts may set unused bits in MCSR; mask these off */ -#define MCSR_MASK (MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \ - MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \ - MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \ - MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR) -#endif -#ifdef CONFIG_E200 -#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */ -#define MCSR_CP_PERR 0x20000000UL /* Cache Push Parity Error */ -#define MCSR_CPERR 0x10000000UL /* Cache Parity Error */ -#define MCSR_EXCP_ERR 0x08000000UL /* ISI, ITLB, or Bus Error on 1st insn - fetch for an exception handler */ -#define MCSR_BUS_IRERR 0x00000010UL /* Read Bus Error on instruction fetch*/ -#define MCSR_BUS_DRERR 0x00000008UL /* Read Bus Error on data load */ -#define MCSR_BUS_WRERR 0x00000004UL /* Write Bus Error on buffered - store or cache line push */ - -/* e200 parts may set unused bits in MCSR; mask these off */ -#define MCSR_MASK (MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \ - MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \ - MCSR_BUS_WRERR) -#endif - -/* Bit definitions for the DBSR. */ -/* - * DBSR bits which have conflicting definitions on true Book E versus IBM 40x. - */ -#ifdef CONFIG_BOOKE -#define DBSR_IC 0x08000000 /* Instruction Completion */ -#define DBSR_BT 0x04000000 /* Branch Taken */ -#define DBSR_IRPT 0x02000000 /* Exception Debug Event */ -#define DBSR_TIE 0x01000000 /* Trap Instruction Event */ -#define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */ -#define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */ -#define DBSR_IAC3 0x00200000 /* Instr Address Compare 3 Event */ -#define DBSR_IAC4 0x00100000 /* Instr Address Compare 4 Event */ -#define DBSR_DAC1R 0x00080000 /* Data Addr Compare 1 Read Event */ -#define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */ -#define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */ -#define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */ -#define DBSR_RET 0x00008000 /* Return Debug Event */ -#define DBSR_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ -#define DBSR_CRET 0x00000020 /* Critical Return Debug Event */ -#endif -#ifdef CONFIG_40x -#define DBSR_IC 0x80000000 /* Instruction Completion */ -#define DBSR_BT 0x40000000 /* Branch taken */ -#define DBSR_IRPT 0x20000000 /* Exception Debug Event */ -#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */ -#define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */ -#define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */ -#define DBSR_IAC3 0x00080000 /* Instruction Address Compare 3 Event */ -#define DBSR_IAC4 0x00040000 /* Instruction Address Compare 4 Event */ -#define DBSR_DAC1R 0x01000000 /* Data Address Compare 1 Read Event */ -#define DBSR_DAC1W 0x00800000 /* Data Address Compare 1 Write Event */ -#define DBSR_DAC2R 0x00400000 /* Data Address Compare 2 Read Event */ -#define DBSR_DAC2W 0x00200000 /* Data Address Compare 2 Write Event */ -#endif - -/* Bit definitions related to the ESR. */ -#define ESR_MCI 0x80000000 /* Machine Check - Instruction */ -#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */ -#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */ -#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */ -#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */ -#define ESR_PIL 0x08000000 /* Program Exception - Illegal */ -#define ESR_PPR 0x04000000 /* Program Exception - Privileged */ -#define ESR_PTR 0x02000000 /* Program Exception - Trap */ -#define ESR_FP 0x01000000 /* Floating Point Operation */ -#define ESR_DST 0x00800000 /* Storage Exception - Data miss */ -#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */ -#define ESR_ST 0x00800000 /* Store Operation */ -#define ESR_DLK 0x00200000 /* Data Cache Locking */ -#define ESR_ILK 0x00100000 /* Instr. Cache Locking */ -#define ESR_PUO 0x00040000 /* Unimplemented Operation exception */ -#define ESR_BO 0x00020000 /* Byte Ordering */ - -/* Bit definitions related to the DBCR0. */ -#if defined(CONFIG_40x) -#define DBCR0_EDM 0x80000000 /* External Debug Mode */ -#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ -#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ -#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ -#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ -#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ -#define DBCR0_RST_NONE 0x00000000 /* No Reset */ -#define DBCR0_IC 0x08000000 /* Instruction Completion */ -#define DBCR0_ICMP DBCR0_IC -#define DBCR0_BT 0x04000000 /* Branch Taken */ -#define DBCR0_BRT DBCR0_BT -#define DBCR0_EDE 0x02000000 /* Exception Debug Event */ -#define DBCR0_IRPT DBCR0_EDE -#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ -#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */ -#define DBCR0_IAC1 DBCR0_IA1 -#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */ -#define DBCR0_IAC2 DBCR0_IA2 -#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */ -#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */ -#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */ -#define DBCR0_IAC3 DBCR0_IA3 -#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */ -#define DBCR0_IAC4 DBCR0_IA4 -#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */ -#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */ -#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */ -#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ -#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ -#elif defined(CONFIG_BOOKE) -#define DBCR0_EDM 0x80000000 /* External Debug Mode */ -#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ -#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ -/* DBCR0_RST_* is 44x specific and not followed in fsl booke */ -#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ -#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ -#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ -#define DBCR0_RST_NONE 0x00000000 /* No Reset */ -#define DBCR0_ICMP 0x08000000 /* Instruction Completion */ -#define DBCR0_IC DBCR0_ICMP -#define DBCR0_BRT 0x04000000 /* Branch Taken */ -#define DBCR0_BT DBCR0_BRT -#define DBCR0_IRPT 0x02000000 /* Exception Debug Event */ -#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ -#define DBCR0_TIE DBCR0_TDE -#define DBCR0_IAC1 0x00800000 /* Instr Addr compare 1 enable */ -#define DBCR0_IAC2 0x00400000 /* Instr Addr compare 2 enable */ -#define DBCR0_IAC3 0x00200000 /* Instr Addr compare 3 enable */ -#define DBCR0_IAC4 0x00100000 /* Instr Addr compare 4 enable */ -#define DBCR0_DAC1R 0x00080000 /* DAC 1 Read enable */ -#define DBCR0_DAC1W 0x00040000 /* DAC 1 Write enable */ -#define DBCR0_DAC2R 0x00020000 /* DAC 2 Read enable */ -#define DBCR0_DAC2W 0x00010000 /* DAC 2 Write enable */ -#define DBCR0_RET 0x00008000 /* Return Debug Event */ -#define DBCR0_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ -#define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */ -#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ - -/* Bit definitions related to the DBCR1. */ -#define DBCR1_IAC12M 0x00800000 /* Instr Addr 1-2 range enable */ -#define DBCR1_IAC12MX 0x00C00000 /* Instr Addr 1-2 range eXclusive */ -#define DBCR1_IAC12AT 0x00010000 /* Instr Addr 1-2 range Toggle */ -#define DBCR1_IAC34M 0x00000080 /* Instr Addr 3-4 range enable */ -#define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */ -#define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */ - -/* Bit definitions related to the DBCR2. */ -#define DBCR2_DAC12M 0x00800000 /* DAC 1-2 range enable */ -#define DBCR2_DAC12MX 0x00C00000 /* DAC 1-2 range eXclusive */ -#define DBCR2_DAC12A 0x00200000 /* DAC 1-2 Asynchronous */ -#endif - -/* Bit definitions related to the TCR. */ -#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ -#define TCR_WP_MASK TCR_WP(3) -#define WP_2_17 0 /* 2^17 clocks */ -#define WP_2_21 1 /* 2^21 clocks */ -#define WP_2_25 2 /* 2^25 clocks */ -#define WP_2_29 3 /* 2^29 clocks */ -#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */ -#define TCR_WRC_MASK TCR_WRC(3) -#define WRC_NONE 0 /* No reset will occur */ -#define WRC_CORE 1 /* Core reset will occur */ -#define WRC_CHIP 2 /* Chip reset will occur */ -#define WRC_SYSTEM 3 /* System reset will occur */ -#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */ -#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */ -#define TCR_DIE TCR_PIE /* DEC Interrupt Enable */ -#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */ -#define TCR_FP_MASK TCR_FP(3) -#define FP_2_9 0 /* 2^9 clocks */ -#define FP_2_13 1 /* 2^13 clocks */ -#define FP_2_17 2 /* 2^17 clocks */ -#define FP_2_21 3 /* 2^21 clocks */ -#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */ -#define TCR_ARE 0x00400000 /* Auto Reload Enable */ - -/* Bit definitions for the TSR. */ -#define TSR_ENW 0x80000000 /* Enable Next Watchdog */ -#define TSR_WIS 0x40000000 /* WDT Interrupt Status */ -#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */ -#define WRS_NONE 0 /* No WDT reset occurred */ -#define WRS_CORE 1 /* WDT forced core reset */ -#define WRS_CHIP 2 /* WDT forced chip reset */ -#define WRS_SYSTEM 3 /* WDT forced system reset */ -#define TSR_PIS 0x08000000 /* PIT Interrupt Status */ -#define TSR_DIS TSR_PIS /* DEC Interrupt Status */ -#define TSR_FIS 0x04000000 /* FIT Interrupt Status */ - -/* Bit definitions for the DCCR. */ -#define DCCR_NOCACHE 0 /* Noncacheable */ -#define DCCR_CACHE 1 /* Cacheable */ - -/* Bit definitions for DCWR. */ -#define DCWR_COPY 0 /* Copy-back */ -#define DCWR_WRITE 1 /* Write-through */ - -/* Bit definitions for ICCR. */ -#define ICCR_NOCACHE 0 /* Noncacheable */ -#define ICCR_CACHE 1 /* Cacheable */ - -/* Bit definitions for L1CSR0. */ -#define L1CSR0_CLFC 0x00000100 /* Cache Lock Bits Flash Clear */ -#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */ -#define L1CSR0_CFI 0x00000002 /* Cache Flash Invalidate */ -#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */ - -/* Bit definitions for L1CSR1. */ -#define L1CSR1_ICLFR 0x00000100 /* Instr Cache Lock Bits Flash Reset */ -#define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */ -#define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */ - -/* Bit definitions for L2CSR0. */ -#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */ -#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */ -#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */ -#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */ -#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */ -#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */ -#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */ -#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */ -#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */ -#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */ -#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */ -#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */ - -/* Bit definitions for SGR. */ -#define SGR_NORMAL 0 /* Speculative fetching allowed. */ -#define SGR_GUARDED 1 /* Speculative fetching disallowed. */ - -/* Bit definitions for SPEFSCR. */ -#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */ -#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */ -#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */ -#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */ -#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */ -#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */ -#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */ -#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */ -#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */ -#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */ -#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */ -#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */ -#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */ -#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */ -#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */ -#define SPEFSCR_OV 0x00004000 /* Integer overflow */ -#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */ -#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */ -#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */ -#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */ -#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */ -#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */ -#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */ -#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */ -#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */ -#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */ -#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */ -#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */ - -/* - * The IBM-403 is an even more odd special case, as it is much - * older than the IBM-405 series. We put these down here incase someone - * wishes to support these machines again. - */ -#ifdef CONFIG_403GCX -/* Special Purpose Registers (SPRNs)*/ -#define SPRN_TBHU 0x3CC /* Time Base High User-mode */ -#define SPRN_TBLU 0x3CD /* Time Base Low User-mode */ -#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */ -#define SPRN_TBHI 0x3DC /* Time Base High */ -#define SPRN_TBLO 0x3DD /* Time Base Low */ -#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */ -#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */ -#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */ -#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */ -#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */ - - -/* Bit definitions for the DBCR. */ -#define DBCR_EDM DBCR0_EDM -#define DBCR_IDM DBCR0_IDM -#define DBCR_RST(x) (((x) & 0x3) << 28) -#define DBCR_RST_NONE 0 -#define DBCR_RST_CORE 1 -#define DBCR_RST_CHIP 2 -#define DBCR_RST_SYSTEM 3 -#define DBCR_IC DBCR0_IC /* Instruction Completion Debug Evnt */ -#define DBCR_BT DBCR0_BT /* Branch Taken Debug Event */ -#define DBCR_EDE DBCR0_EDE /* Exception Debug Event */ -#define DBCR_TDE DBCR0_TDE /* TRAP Debug Event */ -#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */ -#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */ -#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */ -#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */ -#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */ -#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */ -#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */ -#define DAC_BYTE 0 -#define DAC_HALF 1 -#define DAC_WORD 2 -#define DAC_QUAD 3 -#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */ -#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */ -#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */ -#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */ -#define DBCR_SED 0x00000020 /* Second Exception Debug Event */ -#define DBCR_STD 0x00000010 /* Second Trap Debug Event */ -#define DBCR_SIA 0x00000008 /* Second IAC Enable */ -#define DBCR_SDA 0x00000004 /* Second DAC Enable */ -#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */ -#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */ -#endif /* 403GCX */ -#endif /* __ASM_POWERPC_REG_BOOKE_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/reg_fsl_emb.h b/include/asm-powerpc/reg_fsl_emb.h deleted file mode 100644 index 1e180a594589..000000000000 --- a/include/asm-powerpc/reg_fsl_emb.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * Contains register definitions for the Freescale Embedded Performance - * Monitor. - */ -#ifdef __KERNEL__ -#ifndef __ASM_POWERPC_REG_FSL_EMB_H__ -#define __ASM_POWERPC_REG_FSL_EMB_H__ - -#ifndef __ASSEMBLY__ -/* Performance Monitor Registers */ -#define mfpmr(rn) ({unsigned int rval; \ - asm volatile("mfpmr %0," __stringify(rn) \ - : "=r" (rval)); rval;}) -#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v)) -#endif /* __ASSEMBLY__ */ - -/* Freescale Book E Performance Monitor APU Registers */ -#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */ -#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */ -#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */ -#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */ -#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */ -#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */ -#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */ -#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */ - -#define PMLCA_FC 0x80000000 /* Freeze Counter */ -#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */ -#define PMLCA_FCU 0x20000000 /* Freeze in User */ -#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */ -#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */ -#define PMLCA_CE 0x04000000 /* Condition Enable */ - -#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */ -#define PMLCA_EVENT_SHIFT 16 - -#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */ -#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */ -#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */ -#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */ - -#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */ -#define PMLCB_THRESHMUL_SHIFT 8 - -#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */ -#define PMLCB_THRESHOLD_SHIFT 0 - -#define PMRN_PMGC0 0x190 /* PM Global Control 0 */ - -#define PMGC0_FAC 0x80000000 /* Freeze all Counters */ -#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */ -#define PMGC0_FCECE 0x20000000 /* Freeze countes on - Enabled Condition or - Event */ - -#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */ -#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */ -#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */ -#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */ -#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */ -#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */ -#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */ -#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */ -#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */ -#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */ -#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */ -#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */ -#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */ - - -#endif /* __ASM_POWERPC_REG_FSL_EMB_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/resource.h b/include/asm-powerpc/resource.h deleted file mode 100644 index 04bc4db8921b..000000000000 --- a/include/asm-powerpc/resource.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-powerpc/rheap.h b/include/asm-powerpc/rheap.h deleted file mode 100644 index 172381769cfc..000000000000 --- a/include/asm-powerpc/rheap.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * include/asm-ppc/rheap.h - * - * Header file for the implementation of a remote heap. - * - * Author: Pantelis Antoniou - * - * 2004 (c) INTRACOM S.A. Greece. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASM_PPC_RHEAP_H__ -#define __ASM_PPC_RHEAP_H__ - -#include - -typedef struct _rh_block { - struct list_head list; - unsigned long start; - int size; - const char *owner; -} rh_block_t; - -typedef struct _rh_info { - unsigned int alignment; - int max_blocks; - int empty_slots; - rh_block_t *block; - struct list_head empty_list; - struct list_head free_list; - struct list_head taken_list; - unsigned int flags; -} rh_info_t; - -#define RHIF_STATIC_INFO 0x1 -#define RHIF_STATIC_BLOCK 0x2 - -typedef struct _rh_stats { - unsigned long start; - int size; - const char *owner; -} rh_stats_t; - -#define RHGS_FREE 0 -#define RHGS_TAKEN 1 - -/* Create a remote heap dynamically */ -extern rh_info_t *rh_create(unsigned int alignment); - -/* Destroy a remote heap, created by rh_create() */ -extern void rh_destroy(rh_info_t * info); - -/* Initialize in place a remote info block */ -extern void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks, - rh_block_t * block); - -/* Attach a free region to manage */ -extern int rh_attach_region(rh_info_t * info, unsigned long start, int size); - -/* Detach a free region */ -extern unsigned long rh_detach_region(rh_info_t * info, unsigned long start, int size); - -/* Allocate the given size from the remote heap (with alignment) */ -extern unsigned long rh_alloc_align(rh_info_t * info, int size, int alignment, - const char *owner); - -/* Allocate the given size from the remote heap */ -extern unsigned long rh_alloc(rh_info_t * info, int size, const char *owner); - -/* Allocate the given size from the given address */ -extern unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, - const char *owner); - -/* Free the allocated area */ -extern int rh_free(rh_info_t * info, unsigned long start); - -/* Get stats for debugging purposes */ -extern int rh_get_stats(rh_info_t * info, int what, int max_stats, - rh_stats_t * stats); - -/* Simple dump of remote heap info */ -extern void rh_dump(rh_info_t * info); - -/* Set owner of taken block */ -extern int rh_set_owner(rh_info_t * info, unsigned long start, const char *owner); - -#endif /* __ASM_PPC_RHEAP_H__ */ diff --git a/include/asm-powerpc/rio.h b/include/asm-powerpc/rio.h deleted file mode 100644 index 0018bf80cb25..000000000000 --- a/include/asm-powerpc/rio.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * RapidIO architecture support - * - * Copyright 2005 MontaVista Software, Inc. - * Matt Porter - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef ASM_PPC_RIO_H -#define ASM_PPC_RIO_H - -extern void platform_rio_init(void); - -#endif /* ASM_PPC_RIO_H */ diff --git a/include/asm-powerpc/rtas.h b/include/asm-powerpc/rtas.h deleted file mode 100644 index 8eaa7b28d9d0..000000000000 --- a/include/asm-powerpc/rtas.h +++ /dev/null @@ -1,247 +0,0 @@ -#ifndef _POWERPC_RTAS_H -#define _POWERPC_RTAS_H -#ifdef __KERNEL__ - -#include -#include - -/* - * Definitions for talking to the RTAS on CHRP machines. - * - * Copyright (C) 2001 Peter Bergner - * Copyright (C) 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define RTAS_UNKNOWN_SERVICE (-1) -#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */ - -/* Buffer size for ppc_rtas system call. */ -#define RTAS_RMOBUF_MAX (64 * 1024) - -/* RTAS return status codes */ -#define RTAS_NOT_SUSPENDABLE -9004 -#define RTAS_BUSY -2 /* RTAS Busy */ -#define RTAS_EXTENDED_DELAY_MIN 9900 -#define RTAS_EXTENDED_DELAY_MAX 9905 - -/* - * In general to call RTAS use rtas_token("string") to lookup - * an RTAS token for the given string (e.g. "event-scan"). - * To actually perform the call use - * ret = rtas_call(token, n_in, n_out, ...) - * Where n_in is the number of input parameters and - * n_out is the number of output parameters - * - * If the "string" is invalid on this system, RTAS_UNKNOWN_SERVICE - * will be returned as a token. rtas_call() does look for this - * token and error out gracefully so rtas_call(rtas_token("str"), ...) - * may be safely used for one-shot calls to RTAS. - * - */ - -typedef u32 rtas_arg_t; - -struct rtas_args { - u32 token; - u32 nargs; - u32 nret; - rtas_arg_t args[16]; - rtas_arg_t *rets; /* Pointer to return values in args[]. */ -}; - -struct rtas_t { - unsigned long entry; /* physical address pointer */ - unsigned long base; /* physical address pointer */ - unsigned long size; - spinlock_t lock; - struct rtas_args args; - struct device_node *dev; /* virtual address pointer */ -}; - -/* RTAS event classes */ -#define RTAS_INTERNAL_ERROR 0x80000000 /* set bit 0 */ -#define RTAS_EPOW_WARNING 0x40000000 /* set bit 1 */ -#define RTAS_POWERMGM_EVENTS 0x20000000 /* set bit 2 */ -#define RTAS_HOTPLUG_EVENTS 0x10000000 /* set bit 3 */ -#define RTAS_EVENT_SCAN_ALL_EVENTS 0xf0000000 - -/* RTAS event severity */ -#define RTAS_SEVERITY_FATAL 0x5 -#define RTAS_SEVERITY_ERROR 0x4 -#define RTAS_SEVERITY_ERROR_SYNC 0x3 -#define RTAS_SEVERITY_WARNING 0x2 -#define RTAS_SEVERITY_EVENT 0x1 -#define RTAS_SEVERITY_NO_ERROR 0x0 - -/* RTAS event disposition */ -#define RTAS_DISP_FULLY_RECOVERED 0x0 -#define RTAS_DISP_LIMITED_RECOVERY 0x1 -#define RTAS_DISP_NOT_RECOVERED 0x2 - -/* RTAS event initiator */ -#define RTAS_INITIATOR_UNKNOWN 0x0 -#define RTAS_INITIATOR_CPU 0x1 -#define RTAS_INITIATOR_PCI 0x2 -#define RTAS_INITIATOR_ISA 0x3 -#define RTAS_INITIATOR_MEMORY 0x4 -#define RTAS_INITIATOR_POWERMGM 0x5 - -/* RTAS event target */ -#define RTAS_TARGET_UNKNOWN 0x0 -#define RTAS_TARGET_CPU 0x1 -#define RTAS_TARGET_PCI 0x2 -#define RTAS_TARGET_ISA 0x3 -#define RTAS_TARGET_MEMORY 0x4 -#define RTAS_TARGET_POWERMGM 0x5 - -/* RTAS event type */ -#define RTAS_TYPE_RETRY 0x01 -#define RTAS_TYPE_TCE_ERR 0x02 -#define RTAS_TYPE_INTERN_DEV_FAIL 0x03 -#define RTAS_TYPE_TIMEOUT 0x04 -#define RTAS_TYPE_DATA_PARITY 0x05 -#define RTAS_TYPE_ADDR_PARITY 0x06 -#define RTAS_TYPE_CACHE_PARITY 0x07 -#define RTAS_TYPE_ADDR_INVALID 0x08 -#define RTAS_TYPE_ECC_UNCORR 0x09 -#define RTAS_TYPE_ECC_CORR 0x0a -#define RTAS_TYPE_EPOW 0x40 -#define RTAS_TYPE_PLATFORM 0xE0 -#define RTAS_TYPE_IO 0xE1 -#define RTAS_TYPE_INFO 0xE2 -#define RTAS_TYPE_DEALLOC 0xE3 -#define RTAS_TYPE_DUMP 0xE4 -/* I don't add PowerMGM events right now, this is a different topic */ -#define RTAS_TYPE_PMGM_POWER_SW_ON 0x60 -#define RTAS_TYPE_PMGM_POWER_SW_OFF 0x61 -#define RTAS_TYPE_PMGM_LID_OPEN 0x62 -#define RTAS_TYPE_PMGM_LID_CLOSE 0x63 -#define RTAS_TYPE_PMGM_SLEEP_BTN 0x64 -#define RTAS_TYPE_PMGM_WAKE_BTN 0x65 -#define RTAS_TYPE_PMGM_BATTERY_WARN 0x66 -#define RTAS_TYPE_PMGM_BATTERY_CRIT 0x67 -#define RTAS_TYPE_PMGM_SWITCH_TO_BAT 0x68 -#define RTAS_TYPE_PMGM_SWITCH_TO_AC 0x69 -#define RTAS_TYPE_PMGM_KBD_OR_MOUSE 0x6a -#define RTAS_TYPE_PMGM_ENCLOS_OPEN 0x6b -#define RTAS_TYPE_PMGM_ENCLOS_CLOSED 0x6c -#define RTAS_TYPE_PMGM_RING_INDICATE 0x6d -#define RTAS_TYPE_PMGM_LAN_ATTENTION 0x6e -#define RTAS_TYPE_PMGM_TIME_ALARM 0x6f -#define RTAS_TYPE_PMGM_CONFIG_CHANGE 0x70 -#define RTAS_TYPE_PMGM_SERVICE_PROC 0x71 - -struct rtas_error_log { - unsigned long version:8; /* Architectural version */ - unsigned long severity:3; /* Severity level of error */ - unsigned long disposition:2; /* Degree of recovery */ - unsigned long extended:1; /* extended log present? */ - unsigned long /* reserved */ :2; /* Reserved for future use */ - unsigned long initiator:4; /* Initiator of event */ - unsigned long target:4; /* Target of failed operation */ - unsigned long type:8; /* General event or error*/ - unsigned long extended_log_length:32; /* length in bytes */ - unsigned char buffer[1]; -}; - -/* - * This can be set by the rtas_flash module so that it can get called - * as the absolutely last thing before the kernel terminates. - */ -extern void (*rtas_flash_term_hook)(int); - -extern struct rtas_t rtas; - -extern void enter_rtas(unsigned long); -extern int rtas_token(const char *service); -extern int rtas_service_present(const char *service); -extern int rtas_call(int token, int, int, int *, ...); -extern void rtas_restart(char *cmd); -extern void rtas_power_off(void); -extern void rtas_halt(void); -extern void rtas_os_term(char *str); -extern int rtas_get_sensor(int sensor, int index, int *state); -extern int rtas_get_power_level(int powerdomain, int *level); -extern int rtas_set_power_level(int powerdomain, int level, int *setlevel); -extern int rtas_set_indicator(int indicator, int index, int new_value); -extern int rtas_set_indicator_fast(int indicator, int index, int new_value); -extern void rtas_progress(char *s, unsigned short hex); -extern void rtas_initialize(void); - -struct rtc_time; -extern unsigned long rtas_get_boot_time(void); -extern void rtas_get_rtc_time(struct rtc_time *rtc_time); -extern int rtas_set_rtc_time(struct rtc_time *rtc_time); - -extern unsigned int rtas_busy_delay_time(int status); -extern unsigned int rtas_busy_delay(int status); - -extern int early_init_dt_scan_rtas(unsigned long node, - const char *uname, int depth, void *data); - -extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal); - -/* Error types logged. */ -#define ERR_FLAG_ALREADY_LOGGED 0x0 -#define ERR_FLAG_BOOT 0x1 /* log was pulled from NVRAM on boot */ -#define ERR_TYPE_RTAS_LOG 0x2 /* from rtas event-scan */ -#define ERR_TYPE_KERNEL_PANIC 0x4 /* from panic() */ - -/* All the types and not flags */ -#define ERR_TYPE_MASK (ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC) - -#define RTAS_DEBUG KERN_DEBUG "RTAS: " - -#define RTAS_ERROR_LOG_MAX 2048 - -/* - * Return the firmware-specified size of the error log buffer - * for all rtas calls that require an error buffer argument. - * This includes 'check-exception' and 'rtas-last-error'. - */ -extern int rtas_get_error_log_max(void); - -/* Event Scan Parameters */ -#define EVENT_SCAN_ALL_EVENTS 0xf0000000 -#define SURVEILLANCE_TOKEN 9000 -#define LOG_NUMBER 64 /* must be a power of two */ -#define LOG_NUMBER_MASK (LOG_NUMBER-1) - -/* Some RTAS ops require a data buffer and that buffer must be < 4G. - * Rather than having a memory allocator, just use this buffer - * (get the lock first), make the RTAS call. Copy the data instead - * of holding the buffer for long. - */ - -#define RTAS_DATA_BUF_SIZE 4096 -extern spinlock_t rtas_data_buf_lock; -extern char rtas_data_buf[RTAS_DATA_BUF_SIZE]; - -/* RMO buffer reserved for user-space RTAS use */ -extern unsigned long rtas_rmo_buf; - -#define GLOBAL_INTERRUPT_QUEUE 9005 - -/** - * rtas_config_addr - Format a busno, devfn and reg for RTAS. - * @busno: The bus number. - * @devfn: The device and function number as encoded by PCI_DEVFN(). - * @reg: The register number. - * - * This function encodes the given busno, devfn and register number as - * required for RTAS calls that take a "config_addr" parameter. - * See PAPR requirement 7.3.4-1 for more info. - */ -static inline u32 rtas_config_addr(int busno, int devfn, int reg) -{ - return ((reg & 0xf00) << 20) | ((busno & 0xff) << 16) | - (devfn << 8) | (reg & 0xff); -} - -#endif /* __KERNEL__ */ -#endif /* _POWERPC_RTAS_H */ diff --git a/include/asm-powerpc/rtc.h b/include/asm-powerpc/rtc.h deleted file mode 100644 index f5802926b6c0..000000000000 --- a/include/asm-powerpc/rtc.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Real-time clock definitions and interfaces - * - * Author: Tom Rini - * - * 2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Based on: - * include/asm-m68k/rtc.h - * - * Copyright Richard Zidlicky - * implementation details for genrtc/q40rtc driver - * - * And the old drivers/macintosh/rtc.c which was heavily based on: - * Linux/SPARC Real Time Clock Driver - * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) - * - * With additional work by Paul Mackerras and Franz Sirl. - */ - -#ifndef __ASM_POWERPC_RTC_H__ -#define __ASM_POWERPC_RTC_H__ - -#ifdef __KERNEL__ - -#include - -#include -#include - -#define RTC_PIE 0x40 /* periodic interrupt enable */ -#define RTC_AIE 0x20 /* alarm interrupt enable */ -#define RTC_UIE 0x10 /* update-finished interrupt enable */ - -/* some dummy definitions */ -#define RTC_BATT_BAD 0x100 /* battery bad */ -#define RTC_SQWE 0x08 /* enable square-wave output */ -#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ -#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ -#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ - -static inline unsigned int get_rtc_time(struct rtc_time *time) -{ - if (ppc_md.get_rtc_time) - ppc_md.get_rtc_time(time); - return RTC_24H; -} - -/* Set the current date and time in the real time clock. */ -static inline int set_rtc_time(struct rtc_time *time) -{ - if (ppc_md.set_rtc_time) - return ppc_md.set_rtc_time(time); - return -EINVAL; -} - -static inline unsigned int get_rtc_ss(void) -{ - struct rtc_time h; - - get_rtc_time(&h); - return h.tm_sec; -} - -static inline int get_rtc_pll(struct rtc_pll_info *pll) -{ - return -EINVAL; -} -static inline int set_rtc_pll(struct rtc_pll_info *pll) -{ - return -EINVAL; -} - -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_RTC_H__ */ diff --git a/include/asm-powerpc/rwsem.h b/include/asm-powerpc/rwsem.h deleted file mode 100644 index a6cc93b78b98..000000000000 --- a/include/asm-powerpc/rwsem.h +++ /dev/null @@ -1,173 +0,0 @@ -#ifndef _ASM_POWERPC_RWSEM_H -#define _ASM_POWERPC_RWSEM_H - -#ifndef _LINUX_RWSEM_H -#error "Please don't include directly, use instead." -#endif - -#ifdef __KERNEL__ - -/* - * include/asm-powerpc/rwsem.h: R/W semaphores for PPC using the stuff - * in lib/rwsem.c. Adapted largely from include/asm-i386/rwsem.h - * by Paul Mackerras . - */ - -#include -#include -#include -#include - -/* - * the semaphore definition - */ -struct rw_semaphore { - /* XXX this should be able to be an atomic_t -- paulus */ - signed int count; -#define RWSEM_UNLOCKED_VALUE 0x00000000 -#define RWSEM_ACTIVE_BIAS 0x00000001 -#define RWSEM_ACTIVE_MASK 0x0000ffff -#define RWSEM_WAITING_BIAS (-0x00010000) -#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS -#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) - spinlock_t wait_lock; - struct list_head wait_list; -#ifdef CONFIG_DEBUG_LOCK_ALLOC - struct lockdep_map dep_map; -#endif -}; - -#ifdef CONFIG_DEBUG_LOCK_ALLOC -# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } -#else -# define __RWSEM_DEP_MAP_INIT(lockname) -#endif - -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ - LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); - -extern void __init_rwsem(struct rw_semaphore *sem, const char *name, - struct lock_class_key *key); - -#define init_rwsem(sem) \ - do { \ - static struct lock_class_key __key; \ - \ - __init_rwsem((sem), #sem, &__key); \ - } while (0) - -/* - * lock for reading - */ -static inline void __down_read(struct rw_semaphore *sem) -{ - if (unlikely(atomic_inc_return((atomic_t *)(&sem->count)) <= 0)) - rwsem_down_read_failed(sem); -} - -static inline int __down_read_trylock(struct rw_semaphore *sem) -{ - int tmp; - - while ((tmp = sem->count) >= 0) { - if (tmp == cmpxchg(&sem->count, tmp, - tmp + RWSEM_ACTIVE_READ_BIAS)) { - return 1; - } - } - return 0; -} - -/* - * lock for writing - */ -static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) -{ - int tmp; - - tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS, - (atomic_t *)(&sem->count)); - if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS)) - rwsem_down_write_failed(sem); -} - -static inline void __down_write(struct rw_semaphore *sem) -{ - __down_write_nested(sem, 0); -} - -static inline int __down_write_trylock(struct rw_semaphore *sem) -{ - int tmp; - - tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE, - RWSEM_ACTIVE_WRITE_BIAS); - return tmp == RWSEM_UNLOCKED_VALUE; -} - -/* - * unlock after reading - */ -static inline void __up_read(struct rw_semaphore *sem) -{ - int tmp; - - tmp = atomic_dec_return((atomic_t *)(&sem->count)); - if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)) - rwsem_wake(sem); -} - -/* - * unlock after writing - */ -static inline void __up_write(struct rw_semaphore *sem) -{ - if (unlikely(atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS, - (atomic_t *)(&sem->count)) < 0)) - rwsem_wake(sem); -} - -/* - * implement atomic add functionality - */ -static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) -{ - atomic_add(delta, (atomic_t *)(&sem->count)); -} - -/* - * downgrade write lock to read lock - */ -static inline void __downgrade_write(struct rw_semaphore *sem) -{ - int tmp; - - tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count)); - if (tmp < 0) - rwsem_downgrade_wake(sem); -} - -/* - * implement exchange and add functionality - */ -static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) -{ - return atomic_add_return(delta, (atomic_t *)(&sem->count)); -} - -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_RWSEM_H */ diff --git a/include/asm-powerpc/scatterlist.h b/include/asm-powerpc/scatterlist.h deleted file mode 100644 index fcf7d55afe45..000000000000 --- a/include/asm-powerpc/scatterlist.h +++ /dev/null @@ -1,50 +0,0 @@ -#ifndef _ASM_POWERPC_SCATTERLIST_H -#define _ASM_POWERPC_SCATTERLIST_H -/* - * Copyright (C) 2001 PPC64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifdef __KERNEL__ -#include -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - unsigned int length; - - /* For TCE support */ - dma_addr_t dma_address; - u32 dma_length; -}; - -/* - * These macros should be used after a dma_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#ifdef __powerpc64__ -#define sg_dma_len(sg) ((sg)->dma_length) -#else -#define sg_dma_len(sg) ((sg)->length) -#endif - -#ifdef __powerpc64__ -#define ISA_DMA_THRESHOLD (~0UL) -#endif - -#define ARCH_HAS_SG_CHAIN - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_SCATTERLIST_H */ diff --git a/include/asm-powerpc/seccomp.h b/include/asm-powerpc/seccomp.h deleted file mode 100644 index 853765eb1f65..000000000000 --- a/include/asm-powerpc/seccomp.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_POWERPC_SECCOMP_H -#define _ASM_POWERPC_SECCOMP_H - -#ifdef __KERNEL__ -#include -#endif - -#include - -#define __NR_seccomp_read __NR_read -#define __NR_seccomp_write __NR_write -#define __NR_seccomp_exit __NR_exit -#define __NR_seccomp_sigreturn __NR_rt_sigreturn - -#define __NR_seccomp_read_32 __NR_read -#define __NR_seccomp_write_32 __NR_write -#define __NR_seccomp_exit_32 __NR_exit -#define __NR_seccomp_sigreturn_32 __NR_sigreturn - -#endif /* _ASM_POWERPC_SECCOMP_H */ diff --git a/include/asm-powerpc/sections.h b/include/asm-powerpc/sections.h deleted file mode 100644 index 916018e425c4..000000000000 --- a/include/asm-powerpc/sections.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _ASM_POWERPC_SECTIONS_H -#define _ASM_POWERPC_SECTIONS_H -#ifdef __KERNEL__ - -#include - -#ifdef __powerpc64__ - -extern char _end[]; - -static inline int in_kernel_text(unsigned long addr) -{ - if (addr >= (unsigned long)_stext && addr < (unsigned long)__init_end) - return 1; - - return 0; -} - -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_SECTIONS_H */ diff --git a/include/asm-powerpc/sembuf.h b/include/asm-powerpc/sembuf.h deleted file mode 100644 index 99a41938ae3d..000000000000 --- a/include/asm-powerpc/sembuf.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef _ASM_POWERPC_SEMBUF_H -#define _ASM_POWERPC_SEMBUF_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* - * The semid64_ds structure for PPC architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ -#ifndef __powerpc64__ - unsigned long __unused1; -#endif - __kernel_time_t sem_otime; /* last semop time */ -#ifndef __powerpc64__ - unsigned long __unused2; -#endif - __kernel_time_t sem_ctime; /* last change time */ - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_POWERPC_SEMBUF_H */ diff --git a/include/asm-powerpc/serial.h b/include/asm-powerpc/serial.h deleted file mode 100644 index 3e8589b43cb2..000000000000 --- a/include/asm-powerpc/serial.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_POWERPC_SERIAL_H -#define _ASM_POWERPC_SERIAL_H - -/* - * Serial ports are not listed here, because they are discovered - * through the device tree. - */ - -/* Default baud base if not found in device-tree */ -#define BASE_BAUD ( 1843200 / 16 ) - -#ifdef CONFIG_PPC_UDBG_16550 -extern void find_legacy_serial_ports(void); -#else -#define find_legacy_serial_ports() do { } while (0) -#endif - -#endif /* _PPC64_SERIAL_H */ diff --git a/include/asm-powerpc/setjmp.h b/include/asm-powerpc/setjmp.h deleted file mode 100644 index 279d03a1eec6..000000000000 --- a/include/asm-powerpc/setjmp.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright © 2008 Michael Neuling IBM Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#ifndef _ASM_POWERPC_SETJMP_H -#define _ASM_POWERPC_SETJMP_H - -#define JMP_BUF_LEN 23 - -extern long setjmp(long *); -extern void longjmp(long *, long); - -#endif /* _ASM_POWERPC_SETJMP_H */ diff --git a/include/asm-powerpc/setup.h b/include/asm-powerpc/setup.h deleted file mode 100644 index 817fac0a0714..000000000000 --- a/include/asm-powerpc/setup.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_POWERPC_SETUP_H -#define _ASM_POWERPC_SETUP_H - -#define COMMAND_LINE_SIZE 512 - -#endif /* _ASM_POWERPC_SETUP_H */ diff --git a/include/asm-powerpc/shmbuf.h b/include/asm-powerpc/shmbuf.h deleted file mode 100644 index 8efa39698b6c..000000000000 --- a/include/asm-powerpc/shmbuf.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef _ASM_POWERPC_SHMBUF_H -#define _ASM_POWERPC_SHMBUF_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* - * The shmid64_ds structure for PPC architecture. - * - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ -#ifndef __powerpc64__ - unsigned long __unused1; -#endif - __kernel_time_t shm_atime; /* last attach time */ -#ifndef __powerpc64__ - unsigned long __unused2; -#endif - __kernel_time_t shm_dtime; /* last detach time */ -#ifndef __powerpc64__ - unsigned long __unused3; -#endif - __kernel_time_t shm_ctime; /* last change time */ -#ifndef __powerpc64__ - unsigned long __unused4; -#endif - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused5; - unsigned long __unused6; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_POWERPC_SHMBUF_H */ diff --git a/include/asm-powerpc/shmparam.h b/include/asm-powerpc/shmparam.h deleted file mode 100644 index 5cda42a6d39e..000000000000 --- a/include/asm-powerpc/shmparam.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_POWERPC_SHMPARAM_H -#define _ASM_POWERPC_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* _ASM_POWERPC_SHMPARAM_H */ diff --git a/include/asm-powerpc/sigcontext.h b/include/asm-powerpc/sigcontext.h deleted file mode 100644 index 9c1f24fd5d11..000000000000 --- a/include/asm-powerpc/sigcontext.h +++ /dev/null @@ -1,87 +0,0 @@ -#ifndef _ASM_POWERPC_SIGCONTEXT_H -#define _ASM_POWERPC_SIGCONTEXT_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#ifdef __powerpc64__ -#include -#endif - -struct sigcontext { - unsigned long _unused[4]; - int signal; -#ifdef __powerpc64__ - int _pad0; -#endif - unsigned long handler; - unsigned long oldmask; - struct pt_regs __user *regs; -#ifdef __powerpc64__ - elf_gregset_t gp_regs; - elf_fpregset_t fp_regs; -/* - * To maintain compatibility with current implementations the sigcontext is - * extended by appending a pointer (v_regs) to a quadword type (elf_vrreg_t) - * followed by an unstructured (vmx_reserve) field of 69 doublewords. This - * allows the array of vector registers to be quadword aligned independent of - * the alignment of the containing sigcontext or ucontext. It is the - * responsibility of the code setting the sigcontext to set this pointer to - * either NULL (if this processor does not support the VMX feature) or the - * address of the first quadword within the allocated (vmx_reserve) area. - * - * The pointer (v_regs) of vector type (elf_vrreg_t) is type compatible with - * an array of 34 quadword entries (elf_vrregset_t). The entries with - * indexes 0-31 contain the corresponding vector registers. The entry with - * index 32 contains the vscr as the last word (offset 12) within the - * quadword. This allows the vscr to be stored as either a quadword (since - * it must be copied via a vector register to/from storage) or as a word. - * The entry with index 33 contains the vrsave as the first word (offset 0) - * within the quadword. - * - * Part of the VSX data is stored here also by extending vmx_restore - * by an additional 32 double words. Architecturally the layout of - * the VSR registers and how they overlap on top of the legacy FPR and - * VR registers is shown below: - * - * VSR doubleword 0 VSR doubleword 1 - * ---------------------------------------------------------------- - * VSR[0] | FPR[0] | | - * ---------------------------------------------------------------- - * VSR[1] | FPR[1] | | - * ---------------------------------------------------------------- - * | ... | | - * | ... | | - * ---------------------------------------------------------------- - * VSR[30] | FPR[30] | | - * ---------------------------------------------------------------- - * VSR[31] | FPR[31] | | - * ---------------------------------------------------------------- - * VSR[32] | VR[0] | - * ---------------------------------------------------------------- - * VSR[33] | VR[1] | - * ---------------------------------------------------------------- - * | ... | - * | ... | - * ---------------------------------------------------------------- - * VSR[62] | VR[30] | - * ---------------------------------------------------------------- - * VSR[63] | VR[31] | - * ---------------------------------------------------------------- - * - * FPR/VSR 0-31 doubleword 0 is stored in fp_regs, and VMX/VSR 32-63 - * is stored at the start of vmx_reserve. vmx_reserve is extended for - * backwards compatility to store VSR 0-31 doubleword 1 after the VMX - * registers and vscr/vrsave. - */ - elf_vrreg_t __user *v_regs; - long vmx_reserve[ELF_NVRREG+ELF_NVRREG+32+1]; -#endif -}; - -#endif /* _ASM_POWERPC_SIGCONTEXT_H */ diff --git a/include/asm-powerpc/siginfo.h b/include/asm-powerpc/siginfo.h deleted file mode 100644 index 12f1bce037be..000000000000 --- a/include/asm-powerpc/siginfo.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _ASM_POWERPC_SIGINFO_H -#define _ASM_POWERPC_SIGINFO_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifdef __powerpc64__ -# define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) -# define SI_PAD_SIZE32 ((SI_MAX_SIZE/sizeof(int)) - 3) -#endif - -#include - -/* - * SIGTRAP si_codes - */ -#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */ -#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint or watchpoint */ -#undef NSIGTRAP -#define NSIGTRAP 4 - -#endif /* _ASM_POWERPC_SIGINFO_H */ diff --git a/include/asm-powerpc/signal.h b/include/asm-powerpc/signal.h deleted file mode 100644 index a7360cdd99eb..000000000000 --- a/include/asm-powerpc/signal.h +++ /dev/null @@ -1,150 +0,0 @@ -#ifndef _ASM_POWERPC_SIGNAL_H -#define _ASM_POWERPC_SIGNAL_H - -#include - -#define _NSIG 64 -#ifdef __powerpc64__ -#define _NSIG_BPW 64 -#else -#define _NSIG_BPW 32 -#endif -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK is not currently supported, but will allow sigaltstack(2). - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001U -#define SA_NOCLDWAIT 0x00000002U -#define SA_SIGINFO 0x00000004U -#define SA_ONSTACK 0x08000000U -#define SA_RESTART 0x10000000U -#define SA_NODEFER 0x40000000U -#define SA_RESETHAND 0x80000000U - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000U - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - __sigrestore_t sa_restorer; -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -struct pt_regs; -extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags); -#define ptrace_signal_deliver(regs, cookie) do { } while (0) -#endif /* __KERNEL__ */ - -#ifndef __powerpc64__ -/* - * These are parameters to dbg_sigreturn syscall. They enable or - * disable certain debugging things that can be done from signal - * handlers. The dbg_sigreturn syscall *must* be called from a - * SA_SIGINFO signal so the ucontext can be passed to it. It takes an - * array of struct sig_dbg_op, which has the debug operations to - * perform before returning from the signal. - */ -struct sig_dbg_op { - int dbg_type; - unsigned long dbg_value; -}; - -/* Enable or disable single-stepping. The value sets the state. */ -#define SIG_DBG_SINGLE_STEPPING 1 - -/* Enable or disable branch tracing. The value sets the state. */ -#define SIG_DBG_BRANCH_TRACING 2 -#endif /* ! __powerpc64__ */ - -#endif /* _ASM_POWERPC_SIGNAL_H */ diff --git a/include/asm-powerpc/smp.h b/include/asm-powerpc/smp.h deleted file mode 100644 index 4d28e1e4521b..000000000000 --- a/include/asm-powerpc/smp.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * smp.h: PowerPC-specific SMP code. - * - * Original was a copy of sparc smp.h. Now heavily modified - * for PPC. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1996-2001 Cort Dougan - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_POWERPC_SMP_H -#define _ASM_POWERPC_SMP_H -#ifdef __KERNEL__ - -#include -#include -#include - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_PPC64 -#include -#endif -#include - -extern int boot_cpuid; - -extern void cpu_die(void); - -#ifdef CONFIG_SMP - -extern void smp_send_debugger_break(int cpu); -extern void smp_message_recv(int); - -DECLARE_PER_CPU(unsigned int, pvr); - -#ifdef CONFIG_HOTPLUG_CPU -extern void fixup_irqs(cpumask_t map); -int generic_cpu_disable(void); -int generic_cpu_enable(unsigned int cpu); -void generic_cpu_die(unsigned int cpu); -void generic_mach_cpu_die(void); -#endif - -#ifdef CONFIG_PPC64 -#define raw_smp_processor_id() (local_paca->paca_index) -#define hard_smp_processor_id() (get_paca()->hw_cpu_id) -#else -/* 32-bit */ -extern int smp_hw_index[]; - -#define raw_smp_processor_id() (current_thread_info()->cpu) -#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()]) -#define get_hard_smp_processor_id(cpu) (smp_hw_index[(cpu)]) -#define set_hard_smp_processor_id(cpu, phys)\ - (smp_hw_index[(cpu)] = (phys)) -#endif - -DECLARE_PER_CPU(cpumask_t, cpu_sibling_map); -DECLARE_PER_CPU(cpumask_t, cpu_core_map); -extern int cpu_to_core_id(int cpu); - -/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers. - * - * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up - * in /proc/interrupts will be wrong!!! --Troy */ -#define PPC_MSG_CALL_FUNCTION 0 -#define PPC_MSG_RESCHEDULE 1 -#define PPC_MSG_CALL_FUNC_SINGLE 2 -#define PPC_MSG_DEBUGGER_BREAK 3 - -void smp_init_iSeries(void); -void smp_init_pSeries(void); -void smp_init_cell(void); -void smp_init_celleb(void); -void smp_setup_cpu_maps(void); -void smp_setup_cpu_sibling_map(void); - -extern int __cpu_disable(void); -extern void __cpu_die(unsigned int cpu); - -#else -/* for UP */ -#define hard_smp_processor_id() 0 -#define smp_setup_cpu_maps() - -#endif /* CONFIG_SMP */ - -#ifdef CONFIG_PPC64 -#define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id) -#define set_hard_smp_processor_id(CPU, VAL) \ - do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0) - -extern void smp_release_cpus(void); - -#else -/* 32-bit */ -#ifndef CONFIG_SMP -extern int boot_cpuid_phys; -#define get_hard_smp_processor_id(cpu) boot_cpuid_phys -#define set_hard_smp_processor_id(cpu, phys) -#endif -#endif - -extern int smt_enabled_at_boot; - -extern int smp_mpic_probe(void); -extern void smp_mpic_setup_cpu(int cpu); -extern void smp_generic_kick_cpu(int nr); - -extern void smp_generic_give_timebase(void); -extern void smp_generic_take_timebase(void); - -extern struct smp_ops_t *smp_ops; - -extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi(cpumask_t mask); - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_SMP_H) */ diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h deleted file mode 100644 index 7ae2753da565..000000000000 --- a/include/asm-powerpc/smu.h +++ /dev/null @@ -1,700 +0,0 @@ -#ifndef _SMU_H -#define _SMU_H - -/* - * Definitions for talking to the SMU chip in newer G5 PowerMacs - */ -#ifdef __KERNEL__ -#include -#endif -#include - -/* - * Known SMU commands - * - * Most of what is below comes from looking at the Open Firmware driver, - * though this is still incomplete and could use better documentation here - * or there... - */ - - -/* - * Partition info commands - * - * These commands are used to retrieve the sdb-partition-XX datas from - * the SMU. The length is always 2. First byte is the subcommand code - * and second byte is the partition ID. - * - * The reply is 6 bytes: - * - * - 0..1 : partition address - * - 2 : a byte containing the partition ID - * - 3 : length (maybe other bits are rest of header ?) - * - * The data must then be obtained with calls to another command: - * SMU_CMD_MISC_ee_GET_DATABLOCK_REC (described below). - */ -#define SMU_CMD_PARTITION_COMMAND 0x3e -#define SMU_CMD_PARTITION_LATEST 0x01 -#define SMU_CMD_PARTITION_BASE 0x02 -#define SMU_CMD_PARTITION_UPDATE 0x03 - - -/* - * Fan control - * - * This is a "mux" for fan control commands. The command seem to - * act differently based on the number of arguments. With 1 byte - * of argument, this seem to be queries for fans status, setpoint, - * etc..., while with 0xe arguments, we will set the fans speeds. - * - * Queries (1 byte arg): - * --------------------- - * - * arg=0x01: read RPM fans status - * arg=0x02: read RPM fans setpoint - * arg=0x11: read PWM fans status - * arg=0x12: read PWM fans setpoint - * - * the "status" queries return the current speed while the "setpoint" ones - * return the programmed/target speed. It _seems_ that the result is a bit - * mask in the first byte of active/available fans, followed by 6 words (16 - * bits) containing the requested speed. - * - * Setpoint (14 bytes arg): - * ------------------------ - * - * first arg byte is 0 for RPM fans and 0x10 for PWM. Second arg byte is the - * mask of fans affected by the command. Followed by 6 words containing the - * setpoint value for selected fans in the mask (or 0 if mask value is 0) - */ -#define SMU_CMD_FAN_COMMAND 0x4a - - -/* - * Battery access - * - * Same command number as the PMU, could it be same syntax ? - */ -#define SMU_CMD_BATTERY_COMMAND 0x6f -#define SMU_CMD_GET_BATTERY_INFO 0x00 - -/* - * Real time clock control - * - * This is a "mux", first data byte contains the "sub" command. - * The "RTC" part of the SMU controls the date, time, powerup - * timer, but also a PRAM - * - * Dates are in BCD format on 7 bytes: - * [sec] [min] [hour] [weekday] [month day] [month] [year] - * with month being 1 based and year minus 100 - */ -#define SMU_CMD_RTC_COMMAND 0x8e -#define SMU_CMD_RTC_SET_PWRUP_TIMER 0x00 /* i: 7 bytes date */ -#define SMU_CMD_RTC_GET_PWRUP_TIMER 0x01 /* o: 7 bytes date */ -#define SMU_CMD_RTC_STOP_PWRUP_TIMER 0x02 -#define SMU_CMD_RTC_SET_PRAM_BYTE_ACC 0x20 /* i: 1 byte (address?) */ -#define SMU_CMD_RTC_SET_PRAM_AUTOINC 0x21 /* i: 1 byte (data?) */ -#define SMU_CMD_RTC_SET_PRAM_LO_BYTES 0x22 /* i: 10 bytes */ -#define SMU_CMD_RTC_SET_PRAM_HI_BYTES 0x23 /* i: 10 bytes */ -#define SMU_CMD_RTC_GET_PRAM_BYTE 0x28 /* i: 1 bytes (address?) */ -#define SMU_CMD_RTC_GET_PRAM_LO_BYTES 0x29 /* o: 10 bytes */ -#define SMU_CMD_RTC_GET_PRAM_HI_BYTES 0x2a /* o: 10 bytes */ -#define SMU_CMD_RTC_SET_DATETIME 0x80 /* i: 7 bytes date */ -#define SMU_CMD_RTC_GET_DATETIME 0x81 /* o: 7 bytes date */ - - /* - * i2c commands - * - * To issue an i2c command, first is to send a parameter block to the - * the SMU. This is a command of type 0x9a with 9 bytes of header - * eventually followed by data for a write: - * - * 0: bus number (from device-tree usually, SMU has lots of busses !) - * 1: transfer type/format (see below) - * 2: device address. For combined and combined4 type transfers, this - * is the "write" version of the address (bit 0x01 cleared) - * 3: subaddress length (0..3) - * 4: subaddress byte 0 (or only byte for subaddress length 1) - * 5: subaddress byte 1 - * 6: subaddress byte 2 - * 7: combined address (device address for combined mode data phase) - * 8: data length - * - * The transfer types are the same good old Apple ones it seems, - * that is: - * - 0x00: Simple transfer - * - 0x01: Subaddress transfer (addr write + data tx, no restart) - * - 0x02: Combined transfer (addr write + restart + data tx) - * - * This is then followed by actual data for a write. - * - * At this point, the OF driver seems to have a limitation on transfer - * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know - * wether this is just an OF limit due to some temporary buffer size - * or if this is an SMU imposed limit. This driver has the same limitation - * for now as I use a 0x10 bytes temporary buffer as well - * - * Once that is completed, a response is expected from the SMU. This is - * obtained via a command of type 0x9a with a length of 1 byte containing - * 0 as the data byte. OF also fills the rest of the data buffer with 0xff's - * though I can't tell yet if this is actually necessary. Once this command - * is complete, at this point, all I can tell is what OF does. OF tests - * byte 0 of the reply: - * - on read, 0xfe or 0xfc : bus is busy, wait (see below) or nak ? - * - on read, 0x00 or 0x01 : reply is in buffer (after the byte 0) - * - on write, < 0 -> failure (immediate exit) - * - else, OF just exists (without error, weird) - * - * So on read, there is this wait-for-busy thing when getting a 0xfc or - * 0xfe result. OF does a loop of up to 64 retries, waiting 20ms and - * doing the above again until either the retries expire or the result - * is no longer 0xfe or 0xfc - * - * The Darwin I2C driver is less subtle though. On any non-success status - * from the response command, it waits 5ms and tries again up to 20 times, - * it doesn't differenciate between fatal errors or "busy" status. - * - * This driver provides an asynchronous paramblock based i2c command - * interface to be used either directly by low level code or by a higher - * level driver interfacing to the linux i2c layer. The current - * implementation of this relies on working timers & timer interrupts - * though, so be careful of calling context for now. This may be "fixed" - * in the future by adding a polling facility. - */ -#define SMU_CMD_I2C_COMMAND 0x9a - /* transfer types */ -#define SMU_I2C_TRANSFER_SIMPLE 0x00 -#define SMU_I2C_TRANSFER_STDSUB 0x01 -#define SMU_I2C_TRANSFER_COMBINED 0x02 - -/* - * Power supply control - * - * The "sub" command is an ASCII string in the data, the - * data length is that of the string. - * - * The VSLEW command can be used to get or set the voltage slewing. - * - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of - * reply at data offset 6, 7 and 8. - * - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is - * used to set the voltage slewing point. The SMU replies with "DONE" - * I yet have to figure out their exact meaning of those 3 bytes in - * both cases. They seem to be: - * x = processor mask - * y = op. point index - * z = processor freq. step index - * I haven't yet decyphered result codes - * - */ -#define SMU_CMD_POWER_COMMAND 0xaa -#define SMU_CMD_POWER_RESTART "RESTART" -#define SMU_CMD_POWER_SHUTDOWN "SHUTDOWN" -#define SMU_CMD_POWER_VOLTAGE_SLEW "VSLEW" - -/* - * Read ADC sensors - * - * This command takes one byte of parameter: the sensor ID (or "reg" - * value in the device-tree) and returns a 16 bits value - */ -#define SMU_CMD_READ_ADC 0xd8 - - -/* Misc commands - * - * This command seem to be a grab bag of various things - * - * Parameters: - * 1: subcommand - */ -#define SMU_CMD_MISC_df_COMMAND 0xdf - -/* - * Sets "system ready" status - * - * I did not yet understand how it exactly works or what it does. - * - * Guessing from OF code, 0x02 activates the display backlight. Apple uses/used - * the same codebase for all OF versions. On PowerBooks, this command would - * enable the backlight. For the G5s, it only activates the front LED. However, - * don't take this for granted. - * - * Parameters: - * 2: status [0x00, 0x01 or 0x02] - */ -#define SMU_CMD_MISC_df_SET_DISPLAY_LIT 0x02 - -/* - * Sets mode of power switch. - * - * What this actually does is not yet known. Maybe it enables some interrupt. - * - * Parameters: - * 2: enable power switch? [0x00 or 0x01] - * 3 (optional): enable nmi? [0x00 or 0x01] - * - * Returns: - * If parameter 2 is 0x00 and parameter 3 is not specified, returns wether - * NMI is enabled. Otherwise unknown. - */ -#define SMU_CMD_MISC_df_NMI_OPTION 0x04 - -/* Sets LED dimm offset. - * - * The front LED dimms itself during sleep. Its brightness (or, well, the PWM - * frequency) depends on current time. Therefore, the SMU needs to know the - * timezone. - * - * Parameters: - * 2-8: unknown (BCD coding) - */ -#define SMU_CMD_MISC_df_DIMM_OFFSET 0x99 - - -/* - * Version info commands - * - * Parameters: - * 1 (optional): Specifies version part to retrieve - * - * Returns: - * Version value - */ -#define SMU_CMD_VERSION_COMMAND 0xea -#define SMU_VERSION_RUNNING 0x00 -#define SMU_VERSION_BASE 0x01 -#define SMU_VERSION_UPDATE 0x02 - - -/* - * Switches - * - * These are switches whose status seems to be known to the SMU. - * - * Parameters: - * none - * - * Result: - * Switch bits (ORed, see below) - */ -#define SMU_CMD_SWITCHES 0xdc - -/* Switches bits */ -#define SMU_SWITCH_CASE_CLOSED 0x01 -#define SMU_SWITCH_AC_POWER 0x04 -#define SMU_SWITCH_POWER_SWITCH 0x08 - - -/* - * Misc commands - * - * This command seem to be a grab bag of various things - * - * SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to - * transfer blocks of data from the SMU. So far, I've decrypted it's - * usage to retrieve partition data. In order to do that, you have to - * break your transfer in "chunks" since that command cannot transfer - * more than a chunk at a time. The chunk size used by OF is 0xe bytes, - * but it seems that the darwin driver will let you do 0x1e bytes if - * your "PMU" version is >= 0x30. You can get the "PMU" version apparently - * either in the last 16 bits of property "smu-version-pmu" or as the 16 - * bytes at offset 1 of "smu-version-info" - * - * For each chunk, the command takes 7 bytes of arguments: - * byte 0: subcommand code (0x02) - * byte 1: 0x04 (always, I don't know what it means, maybe the address - * space to use or some other nicety. It's hard coded in OF) - * byte 2..5: SMU address of the chunk (big endian 32 bits) - * byte 6: size to transfer (up to max chunk size) - * - * The data is returned directly - */ -#define SMU_CMD_MISC_ee_COMMAND 0xee -#define SMU_CMD_MISC_ee_GET_DATABLOCK_REC 0x02 - -/* Retrieves currently used watts. - * - * Parameters: - * 1: 0x03 (Meaning unknown) - */ -#define SMU_CMD_MISC_ee_GET_WATTS 0x03 - -#define SMU_CMD_MISC_ee_LEDS_CTRL 0x04 /* i: 00 (00,01) [00] */ -#define SMU_CMD_MISC_ee_GET_DATA 0x05 /* i: 00 , o: ?? */ - - -/* - * Power related commands - * - * Parameters: - * 1: subcommand - */ -#define SMU_CMD_POWER_EVENTS_COMMAND 0x8f - -/* SMU_POWER_EVENTS subcommands */ -enum { - SMU_PWR_GET_POWERUP_EVENTS = 0x00, - SMU_PWR_SET_POWERUP_EVENTS = 0x01, - SMU_PWR_CLR_POWERUP_EVENTS = 0x02, - SMU_PWR_GET_WAKEUP_EVENTS = 0x03, - SMU_PWR_SET_WAKEUP_EVENTS = 0x04, - SMU_PWR_CLR_WAKEUP_EVENTS = 0x05, - - /* - * Get last shutdown cause - * - * Returns: - * 1 byte (signed char): Last shutdown cause. Exact meaning unknown. - */ - SMU_PWR_LAST_SHUTDOWN_CAUSE = 0x07, - - /* - * Sets or gets server ID. Meaning or use is unknown. - * - * Parameters: - * 2 (optional): Set server ID (1 byte) - * - * Returns: - * 1 byte (server ID?) - */ - SMU_PWR_SERVER_ID = 0x08, -}; - -/* Power events wakeup bits */ -enum { - SMU_PWR_WAKEUP_KEY = 0x01, /* Wake on key press */ - SMU_PWR_WAKEUP_AC_INSERT = 0x02, /* Wake on AC adapter plug */ - SMU_PWR_WAKEUP_AC_CHANGE = 0x04, - SMU_PWR_WAKEUP_LID_OPEN = 0x08, - SMU_PWR_WAKEUP_RING = 0x10, -}; - - -/* - * - Kernel side interface - - */ - -#ifdef __KERNEL__ - -/* - * Asynchronous SMU commands - * - * Fill up this structure and submit it via smu_queue_command(), - * and get notified by the optional done() callback, or because - * status becomes != 1 - */ - -struct smu_cmd; - -struct smu_cmd -{ - /* public */ - u8 cmd; /* command */ - int data_len; /* data len */ - int reply_len; /* reply len */ - void *data_buf; /* data buffer */ - void *reply_buf; /* reply buffer */ - int status; /* command status */ - void (*done)(struct smu_cmd *cmd, void *misc); - void *misc; - - /* private */ - struct list_head link; -}; - -/* - * Queues an SMU command, all fields have to be initialized - */ -extern int smu_queue_cmd(struct smu_cmd *cmd); - -/* - * Simple command wrapper. This structure embeds a small buffer - * to ease sending simple SMU commands from the stack - */ -struct smu_simple_cmd -{ - struct smu_cmd cmd; - u8 buffer[16]; -}; - -/* - * Queues a simple command. All fields will be initialized by that - * function - */ -extern int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command, - unsigned int data_len, - void (*done)(struct smu_cmd *cmd, void *misc), - void *misc, - ...); - -/* - * Completion helper. Pass it to smu_queue_simple or as 'done' - * member to smu_queue_cmd, it will call complete() on the struct - * completion passed in the "misc" argument - */ -extern void smu_done_complete(struct smu_cmd *cmd, void *misc); - -/* - * Synchronous helpers. Will spin-wait for completion of a command - */ -extern void smu_spinwait_cmd(struct smu_cmd *cmd); - -static inline void smu_spinwait_simple(struct smu_simple_cmd *scmd) -{ - smu_spinwait_cmd(&scmd->cmd); -} - -/* - * Poll routine to call if blocked with irqs off - */ -extern void smu_poll(void); - - -/* - * Init routine, presence check.... - */ -extern int smu_init(void); -extern int smu_present(void); -struct of_device; -extern struct of_device *smu_get_ofdev(void); - - -/* - * Common command wrappers - */ -extern void smu_shutdown(void); -extern void smu_restart(void); -struct rtc_time; -extern int smu_get_rtc_time(struct rtc_time *time, int spinwait); -extern int smu_set_rtc_time(struct rtc_time *time, int spinwait); - -/* - * SMU command buffer absolute address, exported by pmac_setup, - * this is allocated very early during boot. - */ -extern unsigned long smu_cmdbuf_abs; - - -/* - * Kenrel asynchronous i2c interface - */ - -#define SMU_I2C_READ_MAX 0x1d -#define SMU_I2C_WRITE_MAX 0x15 - -/* SMU i2c header, exactly matches i2c header on wire */ -struct smu_i2c_param -{ - u8 bus; /* SMU bus ID (from device tree) */ - u8 type; /* i2c transfer type */ - u8 devaddr; /* device address (includes direction) */ - u8 sublen; /* subaddress length */ - u8 subaddr[3]; /* subaddress */ - u8 caddr; /* combined address, filled by SMU driver */ - u8 datalen; /* length of transfer */ - u8 data[SMU_I2C_READ_MAX]; /* data */ -}; - -struct smu_i2c_cmd -{ - /* public */ - struct smu_i2c_param info; - void (*done)(struct smu_i2c_cmd *cmd, void *misc); - void *misc; - int status; /* 1 = pending, 0 = ok, <0 = fail */ - - /* private */ - struct smu_cmd scmd; - int read; - int stage; - int retries; - u8 pdata[32]; - struct list_head link; -}; - -/* - * Call this to queue an i2c command to the SMU. You must fill info, - * including info.data for a write, done and misc. - * For now, no polling interface is provided so you have to use completion - * callback. - */ -extern int smu_queue_i2c(struct smu_i2c_cmd *cmd); - - -#endif /* __KERNEL__ */ - - -/* - * - SMU "sdb" partitions informations - - */ - - -/* - * Partition header format - */ -struct smu_sdbp_header { - __u8 id; - __u8 len; - __u8 version; - __u8 flags; -}; - - - /* - * demangle 16 and 32 bits integer in some SMU partitions - * (currently, afaik, this concerns only the FVT partition - * (0x12) - */ -#define SMU_U16_MIX(x) le16_to_cpu(x); -#define SMU_U32_MIX(x) ((((x) & 0xff00ff00u) >> 8)|(((x) & 0x00ff00ffu) << 8)) - - -/* This is the definition of the SMU sdb-partition-0x12 table (called - * CPU F/V/T operating points in Darwin). The definition for all those - * SMU tables should be moved to some separate file - */ -#define SMU_SDB_FVT_ID 0x12 - -struct smu_sdbp_fvt { - __u32 sysclk; /* Base SysClk frequency in Hz for - * this operating point. Value need to - * be unmixed with SMU_U32_MIX() - */ - __u8 pad; - __u8 maxtemp; /* Max temp. supported by this - * operating point - */ - - __u16 volts[3]; /* CPU core voltage for the 3 - * PowerTune modes, a mode with - * 0V = not supported. Value need - * to be unmixed with SMU_U16_MIX() - */ -}; - -/* This partition contains voltage & current sensor calibration - * informations - */ -#define SMU_SDB_CPUVCP_ID 0x21 - -struct smu_sdbp_cpuvcp { - __u16 volt_scale; /* u4.12 fixed point */ - __s16 volt_offset; /* s4.12 fixed point */ - __u16 curr_scale; /* u4.12 fixed point */ - __s16 curr_offset; /* s4.12 fixed point */ - __s32 power_quads[3]; /* s4.28 fixed point */ -}; - -/* This partition contains CPU thermal diode calibration - */ -#define SMU_SDB_CPUDIODE_ID 0x18 - -struct smu_sdbp_cpudiode { - __u16 m_value; /* u1.15 fixed point */ - __s16 b_value; /* s10.6 fixed point */ - -}; - -/* This partition contains Slots power calibration - */ -#define SMU_SDB_SLOTSPOW_ID 0x78 - -struct smu_sdbp_slotspow { - __u16 pow_scale; /* u4.12 fixed point */ - __s16 pow_offset; /* s4.12 fixed point */ -}; - -/* This partition contains machine specific version information about - * the sensor/control layout - */ -#define SMU_SDB_SENSORTREE_ID 0x25 - -struct smu_sdbp_sensortree { - __u8 model_id; - __u8 unknown[3]; -}; - -/* This partition contains CPU thermal control PID informations. So far - * only single CPU machines have been seen with an SMU, so we assume this - * carries only informations for those - */ -#define SMU_SDB_CPUPIDDATA_ID 0x17 - -struct smu_sdbp_cpupiddata { - __u8 unknown1; - __u8 target_temp_delta; - __u8 unknown2; - __u8 history_len; - __s16 power_adj; - __u16 max_power; - __s32 gp,gr,gd; -}; - - -/* Other partitions without known structures */ -#define SMU_SDB_DEBUG_SWITCHES_ID 0x05 - -#ifdef __KERNEL__ -/* - * This returns the pointer to an SMU "sdb" partition data or NULL - * if not found. The data format is described below - */ -extern const struct smu_sdbp_header *smu_get_sdb_partition(int id, - unsigned int *size); - -/* Get "sdb" partition data from an SMU satellite */ -extern struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, - int id, unsigned int *size); - - -#endif /* __KERNEL__ */ - - -/* - * - Userland interface - - */ - -/* - * A given instance of the device can be configured for 2 different - * things at the moment: - * - * - sending SMU commands (default at open() time) - * - receiving SMU events (not yet implemented) - * - * Commands are written with write() of a command block. They can be - * "driver" commands (for example to switch to event reception mode) - * or real SMU commands. They are made of a header followed by command - * data if any. - * - * For SMU commands (not for driver commands), you can then read() back - * a reply. The reader will be blocked or not depending on how the device - * file is opened. poll() isn't implemented yet. The reply will consist - * of a header as well, followed by the reply data if any. You should - * always provide a buffer large enough for the maximum reply data, I - * recommand one page. - * - * It is illegal to send SMU commands through a file descriptor configured - * for events reception - * - */ -struct smu_user_cmd_hdr -{ - __u32 cmdtype; -#define SMU_CMDTYPE_SMU 0 /* SMU command */ -#define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */ -#define SMU_CMDTYPE_GET_PARTITION 2 /* retrieve an sdb partition */ - - __u8 cmd; /* SMU command byte */ - __u8 pad[3]; /* padding */ - __u32 data_len; /* Length of data following */ -}; - -struct smu_user_reply_hdr -{ - __u32 status; /* Command status */ - __u32 reply_len; /* Length of data follwing */ -}; - -#endif /* _SMU_H */ diff --git a/include/asm-powerpc/socket.h b/include/asm-powerpc/socket.h deleted file mode 100644 index f5a4e168e498..000000000000 --- a/include/asm-powerpc/socket.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef _ASM_POWERPC_SOCKET_H -#define _ASM_POWERPC_SOCKET_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_RCVLOWAT 16 -#define SO_SNDLOWAT 17 -#define SO_RCVTIMEO 18 -#define SO_SNDTIMEO 19 -#define SO_PASSCRED 20 -#define SO_PEERCRED 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#endif /* _ASM_POWERPC_SOCKET_H */ diff --git a/include/asm-powerpc/sockios.h b/include/asm-powerpc/sockios.h deleted file mode 100644 index 55cef7675a31..000000000000 --- a/include/asm-powerpc/sockios.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_POWERPC_SOCKIOS_H -#define _ASM_POWERPC_SOCKIOS_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _ASM_POWERPC_SOCKIOS_H */ diff --git a/include/asm-powerpc/sparsemem.h b/include/asm-powerpc/sparsemem.h deleted file mode 100644 index 54a47ea2c3aa..000000000000 --- a/include/asm-powerpc/sparsemem.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef _ASM_POWERPC_SPARSEMEM_H -#define _ASM_POWERPC_SPARSEMEM_H 1 -#ifdef __KERNEL__ - -#ifdef CONFIG_SPARSEMEM -/* - * SECTION_SIZE_BITS 2^N: how big each section will be - * MAX_PHYSADDR_BITS 2^N: how much physical address space we have - * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space - */ -#define SECTION_SIZE_BITS 24 - -#define MAX_PHYSADDR_BITS 44 -#define MAX_PHYSMEM_BITS 44 - -#endif /* CONFIG_SPARSEMEM */ - -#ifdef CONFIG_MEMORY_HOTPLUG -extern void create_section_mapping(unsigned long start, unsigned long end); -extern int remove_section_mapping(unsigned long start, unsigned long end); -#ifdef CONFIG_NUMA -extern int hot_add_scn_to_nid(unsigned long scn_addr); -#else -static inline int hot_add_scn_to_nid(unsigned long scn_addr) -{ - return 0; -} -#endif /* CONFIG_NUMA */ -#endif /* CONFIG_MEMORY_HOTPLUG */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_SPARSEMEM_H */ diff --git a/include/asm-powerpc/spinlock.h b/include/asm-powerpc/spinlock.h deleted file mode 100644 index f56a843f4705..000000000000 --- a/include/asm-powerpc/spinlock.h +++ /dev/null @@ -1,295 +0,0 @@ -#ifndef __ASM_SPINLOCK_H -#define __ASM_SPINLOCK_H -#ifdef __KERNEL__ - -/* - * Simple spin lock operations. - * - * Copyright (C) 2001-2004 Paul Mackerras , IBM - * Copyright (C) 2001 Anton Blanchard , IBM - * Copyright (C) 2002 Dave Engebretsen , IBM - * Rework to support virtual processors - * - * Type of int is used as a full 64b word is not necessary. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * (the type definitions are in asm/spinlock_types.h) - */ -#include -#ifdef CONFIG_PPC64 -#include -#include -#include -#endif -#include -#include - -#define __raw_spin_is_locked(x) ((x)->slock != 0) - -#ifdef CONFIG_PPC64 -/* use 0x800000yy when locked, where yy == CPU number */ -#define LOCK_TOKEN (*(u32 *)(&get_paca()->lock_token)) -#else -#define LOCK_TOKEN 1 -#endif - -#if defined(CONFIG_PPC64) && defined(CONFIG_SMP) -#define CLEAR_IO_SYNC (get_paca()->io_sync = 0) -#define SYNC_IO do { \ - if (unlikely(get_paca()->io_sync)) { \ - mb(); \ - get_paca()->io_sync = 0; \ - } \ - } while (0) -#else -#define CLEAR_IO_SYNC -#define SYNC_IO -#endif - -/* - * This returns the old value in the lock, so we succeeded - * in getting the lock if the return value is 0. - */ -static inline unsigned long __spin_trylock(raw_spinlock_t *lock) -{ - unsigned long tmp, token; - - token = LOCK_TOKEN; - __asm__ __volatile__( -"1: lwarx %0,0,%2\n\ - cmpwi 0,%0,0\n\ - bne- 2f\n\ - stwcx. %1,0,%2\n\ - bne- 1b\n\ - isync\n\ -2:" : "=&r" (tmp) - : "r" (token), "r" (&lock->slock) - : "cr0", "memory"); - - return tmp; -} - -static inline int __raw_spin_trylock(raw_spinlock_t *lock) -{ - CLEAR_IO_SYNC; - return __spin_trylock(lock) == 0; -} - -/* - * On a system with shared processors (that is, where a physical - * processor is multiplexed between several virtual processors), - * there is no point spinning on a lock if the holder of the lock - * isn't currently scheduled on a physical processor. Instead - * we detect this situation and ask the hypervisor to give the - * rest of our timeslice to the lock holder. - * - * So that we can tell which virtual processor is holding a lock, - * we put 0x80000000 | smp_processor_id() in the lock when it is - * held. Conveniently, we have a word in the paca that holds this - * value. - */ - -#if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES) -/* We only yield to the hypervisor if we are in shared processor mode */ -#define SHARED_PROCESSOR (get_lppaca()->shared_proc) -extern void __spin_yield(raw_spinlock_t *lock); -extern void __rw_yield(raw_rwlock_t *lock); -#else /* SPLPAR || ISERIES */ -#define __spin_yield(x) barrier() -#define __rw_yield(x) barrier() -#define SHARED_PROCESSOR 0 -#endif - -static inline void __raw_spin_lock(raw_spinlock_t *lock) -{ - CLEAR_IO_SYNC; - while (1) { - if (likely(__spin_trylock(lock) == 0)) - break; - do { - HMT_low(); - if (SHARED_PROCESSOR) - __spin_yield(lock); - } while (unlikely(lock->slock != 0)); - HMT_medium(); - } -} - -static inline -void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags) -{ - unsigned long flags_dis; - - CLEAR_IO_SYNC; - while (1) { - if (likely(__spin_trylock(lock) == 0)) - break; - local_save_flags(flags_dis); - local_irq_restore(flags); - do { - HMT_low(); - if (SHARED_PROCESSOR) - __spin_yield(lock); - } while (unlikely(lock->slock != 0)); - HMT_medium(); - local_irq_restore(flags_dis); - } -} - -static inline void __raw_spin_unlock(raw_spinlock_t *lock) -{ - SYNC_IO; - __asm__ __volatile__("# __raw_spin_unlock\n\t" - LWSYNC_ON_SMP: : :"memory"); - lock->slock = 0; -} - -#ifdef CONFIG_PPC64 -extern void __raw_spin_unlock_wait(raw_spinlock_t *lock); -#else -#define __raw_spin_unlock_wait(lock) \ - do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) -#endif - -/* - * Read-write spinlocks, allowing multiple readers - * but only one writer. - * - * NOTE! it is quite common to have readers in interrupts - * but no interrupt writers. For those circumstances we - * can "mix" irq-safe locks - any writer needs to get a - * irq-safe write-lock, but readers can get non-irqsafe - * read-locks. - */ - -#define __raw_read_can_lock(rw) ((rw)->lock >= 0) -#define __raw_write_can_lock(rw) (!(rw)->lock) - -#ifdef CONFIG_PPC64 -#define __DO_SIGN_EXTEND "extsw %0,%0\n" -#define WRLOCK_TOKEN LOCK_TOKEN /* it's negative */ -#else -#define __DO_SIGN_EXTEND -#define WRLOCK_TOKEN (-1) -#endif - -/* - * This returns the old value in the lock + 1, - * so we got a read lock if the return value is > 0. - */ -static inline long __read_trylock(raw_rwlock_t *rw) -{ - long tmp; - - __asm__ __volatile__( -"1: lwarx %0,0,%1\n" - __DO_SIGN_EXTEND -" addic. %0,%0,1\n\ - ble- 2f\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1\n\ - bne- 1b\n\ - isync\n\ -2:" : "=&r" (tmp) - : "r" (&rw->lock) - : "cr0", "xer", "memory"); - - return tmp; -} - -/* - * This returns the old value in the lock, - * so we got the write lock if the return value is 0. - */ -static inline long __write_trylock(raw_rwlock_t *rw) -{ - long tmp, token; - - token = WRLOCK_TOKEN; - __asm__ __volatile__( -"1: lwarx %0,0,%2\n\ - cmpwi 0,%0,0\n\ - bne- 2f\n" - PPC405_ERR77(0,%1) -" stwcx. %1,0,%2\n\ - bne- 1b\n\ - isync\n\ -2:" : "=&r" (tmp) - : "r" (token), "r" (&rw->lock) - : "cr0", "memory"); - - return tmp; -} - -static inline void __raw_read_lock(raw_rwlock_t *rw) -{ - while (1) { - if (likely(__read_trylock(rw) > 0)) - break; - do { - HMT_low(); - if (SHARED_PROCESSOR) - __rw_yield(rw); - } while (unlikely(rw->lock < 0)); - HMT_medium(); - } -} - -static inline void __raw_write_lock(raw_rwlock_t *rw) -{ - while (1) { - if (likely(__write_trylock(rw) == 0)) - break; - do { - HMT_low(); - if (SHARED_PROCESSOR) - __rw_yield(rw); - } while (unlikely(rw->lock != 0)); - HMT_medium(); - } -} - -static inline int __raw_read_trylock(raw_rwlock_t *rw) -{ - return __read_trylock(rw) > 0; -} - -static inline int __raw_write_trylock(raw_rwlock_t *rw) -{ - return __write_trylock(rw) == 0; -} - -static inline void __raw_read_unlock(raw_rwlock_t *rw) -{ - long tmp; - - __asm__ __volatile__( - "# read_unlock\n\t" - LWSYNC_ON_SMP -"1: lwarx %0,0,%1\n\ - addic %0,%0,-1\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1\n\ - bne- 1b" - : "=&r"(tmp) - : "r"(&rw->lock) - : "cr0", "memory"); -} - -static inline void __raw_write_unlock(raw_rwlock_t *rw) -{ - __asm__ __volatile__("# write_unlock\n\t" - LWSYNC_ON_SMP: : :"memory"); - rw->lock = 0; -} - -#define _raw_spin_relax(lock) __spin_yield(lock) -#define _raw_read_relax(lock) __rw_yield(lock) -#define _raw_write_relax(lock) __rw_yield(lock) - -#endif /* __KERNEL__ */ -#endif /* __ASM_SPINLOCK_H */ diff --git a/include/asm-powerpc/spinlock_types.h b/include/asm-powerpc/spinlock_types.h deleted file mode 100644 index 74236c9f05b1..000000000000 --- a/include/asm-powerpc/spinlock_types.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_POWERPC_SPINLOCK_TYPES_H -#define _ASM_POWERPC_SPINLOCK_TYPES_H - -#ifndef __LINUX_SPINLOCK_TYPES_H -# error "please don't include this file directly" -#endif - -typedef struct { - volatile unsigned int slock; -} raw_spinlock_t; - -#define __RAW_SPIN_LOCK_UNLOCKED { 0 } - -typedef struct { - volatile signed int lock; -} raw_rwlock_t; - -#define __RAW_RW_LOCK_UNLOCKED { 0 } - -#endif diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h deleted file mode 100644 index 8b2eb044270a..000000000000 --- a/include/asm-powerpc/spu.h +++ /dev/null @@ -1,732 +0,0 @@ -/* - * SPU core / file system interface and HW structures - * - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 - * - * Author: Arnd Bergmann - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _SPU_H -#define _SPU_H -#ifdef __KERNEL__ - -#include -#include - -#define LS_SIZE (256 * 1024) -#define LS_ADDR_MASK (LS_SIZE - 1) - -#define MFC_PUT_CMD 0x20 -#define MFC_PUTS_CMD 0x28 -#define MFC_PUTR_CMD 0x30 -#define MFC_PUTF_CMD 0x22 -#define MFC_PUTB_CMD 0x21 -#define MFC_PUTFS_CMD 0x2A -#define MFC_PUTBS_CMD 0x29 -#define MFC_PUTRF_CMD 0x32 -#define MFC_PUTRB_CMD 0x31 -#define MFC_PUTL_CMD 0x24 -#define MFC_PUTRL_CMD 0x34 -#define MFC_PUTLF_CMD 0x26 -#define MFC_PUTLB_CMD 0x25 -#define MFC_PUTRLF_CMD 0x36 -#define MFC_PUTRLB_CMD 0x35 - -#define MFC_GET_CMD 0x40 -#define MFC_GETS_CMD 0x48 -#define MFC_GETF_CMD 0x42 -#define MFC_GETB_CMD 0x41 -#define MFC_GETFS_CMD 0x4A -#define MFC_GETBS_CMD 0x49 -#define MFC_GETL_CMD 0x44 -#define MFC_GETLF_CMD 0x46 -#define MFC_GETLB_CMD 0x45 - -#define MFC_SDCRT_CMD 0x80 -#define MFC_SDCRTST_CMD 0x81 -#define MFC_SDCRZ_CMD 0x89 -#define MFC_SDCRS_CMD 0x8D -#define MFC_SDCRF_CMD 0x8F - -#define MFC_GETLLAR_CMD 0xD0 -#define MFC_PUTLLC_CMD 0xB4 -#define MFC_PUTLLUC_CMD 0xB0 -#define MFC_PUTQLLUC_CMD 0xB8 -#define MFC_SNDSIG_CMD 0xA0 -#define MFC_SNDSIGB_CMD 0xA1 -#define MFC_SNDSIGF_CMD 0xA2 -#define MFC_BARRIER_CMD 0xC0 -#define MFC_EIEIO_CMD 0xC8 -#define MFC_SYNC_CMD 0xCC - -#define MFC_MIN_DMA_SIZE_SHIFT 4 /* 16 bytes */ -#define MFC_MAX_DMA_SIZE_SHIFT 14 /* 16384 bytes */ -#define MFC_MIN_DMA_SIZE (1 << MFC_MIN_DMA_SIZE_SHIFT) -#define MFC_MAX_DMA_SIZE (1 << MFC_MAX_DMA_SIZE_SHIFT) -#define MFC_MIN_DMA_SIZE_MASK (MFC_MIN_DMA_SIZE - 1) -#define MFC_MAX_DMA_SIZE_MASK (MFC_MAX_DMA_SIZE - 1) -#define MFC_MIN_DMA_LIST_SIZE 0x0008 /* 8 bytes */ -#define MFC_MAX_DMA_LIST_SIZE 0x4000 /* 16K bytes */ - -#define MFC_TAGID_TO_TAGMASK(tag_id) (1 << (tag_id & 0x1F)) - -/* Events for Channels 0-2 */ -#define MFC_DMA_TAG_STATUS_UPDATE_EVENT 0x00000001 -#define MFC_DMA_TAG_CMD_STALL_NOTIFY_EVENT 0x00000002 -#define MFC_DMA_QUEUE_AVAILABLE_EVENT 0x00000008 -#define MFC_SPU_MAILBOX_WRITTEN_EVENT 0x00000010 -#define MFC_DECREMENTER_EVENT 0x00000020 -#define MFC_PU_INT_MAILBOX_AVAILABLE_EVENT 0x00000040 -#define MFC_PU_MAILBOX_AVAILABLE_EVENT 0x00000080 -#define MFC_SIGNAL_2_EVENT 0x00000100 -#define MFC_SIGNAL_1_EVENT 0x00000200 -#define MFC_LLR_LOST_EVENT 0x00000400 -#define MFC_PRIV_ATTN_EVENT 0x00000800 -#define MFC_MULTI_SRC_EVENT 0x00001000 - -/* Flag indicating progress during context switch. */ -#define SPU_CONTEXT_SWITCH_PENDING 0UL -#define SPU_CONTEXT_FAULT_PENDING 1UL - -struct spu_context; -struct spu_runqueue; -struct spu_lscsa; -struct device_node; - -enum spu_utilization_state { - SPU_UTIL_USER, - SPU_UTIL_SYSTEM, - SPU_UTIL_IOWAIT, - SPU_UTIL_IDLE_LOADED, - SPU_UTIL_MAX -}; - -struct spu { - const char *name; - unsigned long local_store_phys; - u8 *local_store; - unsigned long problem_phys; - struct spu_problem __iomem *problem; - struct spu_priv2 __iomem *priv2; - struct list_head cbe_list; - struct list_head full_list; - enum { SPU_FREE, SPU_USED } alloc_state; - int number; - unsigned int irqs[3]; - u32 node; - u64 flags; - u64 class_0_pending; - u64 class_0_dar; - u64 class_1_dar; - u64 class_1_dsisr; - size_t ls_size; - unsigned int slb_replace; - struct mm_struct *mm; - struct spu_context *ctx; - struct spu_runqueue *rq; - unsigned long long timestamp; - pid_t pid; - pid_t tgid; - spinlock_t register_lock; - - void (* wbox_callback)(struct spu *spu); - void (* ibox_callback)(struct spu *spu); - void (* stop_callback)(struct spu *spu, int irq); - void (* mfc_callback)(struct spu *spu); - - char irq_c0[8]; - char irq_c1[8]; - char irq_c2[8]; - - u64 spe_id; - - void* pdata; /* platform private data */ - - /* of based platforms only */ - struct device_node *devnode; - - /* native only */ - struct spu_priv1 __iomem *priv1; - - /* beat only */ - u64 shadow_int_mask_RW[3]; - - struct sys_device sysdev; - - int has_mem_affinity; - struct list_head aff_list; - - struct { - /* protected by interrupt reentrancy */ - enum spu_utilization_state util_state; - unsigned long long tstamp; - unsigned long long times[SPU_UTIL_MAX]; - unsigned long long vol_ctx_switch; - unsigned long long invol_ctx_switch; - unsigned long long min_flt; - unsigned long long maj_flt; - unsigned long long hash_flt; - unsigned long long slb_flt; - unsigned long long class2_intr; - unsigned long long libassist; - } stats; -}; - -struct cbe_spu_info { - struct mutex list_mutex; - struct list_head spus; - int n_spus; - int nr_active; - atomic_t busy_spus; - atomic_t reserved_spus; -}; - -extern struct cbe_spu_info cbe_spu_info[]; - -void spu_init_channels(struct spu *spu); -void spu_irq_setaffinity(struct spu *spu, int cpu); - -void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa, - void *code, int code_size); - -#ifdef CONFIG_KEXEC -void crash_register_spus(struct list_head *list); -#else -static inline void crash_register_spus(struct list_head *list) -{ -} -#endif - -extern void spu_invalidate_slbs(struct spu *spu); -extern void spu_associate_mm(struct spu *spu, struct mm_struct *mm); -int spu_64k_pages_available(void); - -/* Calls from the memory management to the SPU */ -struct mm_struct; -extern void spu_flush_all_slbs(struct mm_struct *mm); - -/* This interface allows a profiler (e.g., OProfile) to store a ref - * to spu context information that it creates. This caching technique - * avoids the need to recreate this information after a save/restore operation. - * - * Assumes the caller has already incremented the ref count to - * profile_info; then spu_context_destroy must call kref_put - * on prof_info_kref. - */ -void spu_set_profile_private_kref(struct spu_context *ctx, - struct kref *prof_info_kref, - void ( * prof_info_release) (struct kref *kref)); - -void *spu_get_profile_private_kref(struct spu_context *ctx); - -/* system callbacks from the SPU */ -struct spu_syscall_block { - u64 nr_ret; - u64 parm[6]; -}; -extern long spu_sys_callback(struct spu_syscall_block *s); - -/* syscalls implemented in spufs */ -struct file; -struct spufs_calls { - long (*create_thread)(const char __user *name, - unsigned int flags, mode_t mode, - struct file *neighbor); - long (*spu_run)(struct file *filp, __u32 __user *unpc, - __u32 __user *ustatus); - int (*coredump_extra_notes_size)(void); - int (*coredump_extra_notes_write)(struct file *file, loff_t *foffset); - void (*notify_spus_active)(void); - struct module *owner; -}; - -/* return status from spu_run, same as in libspe */ -#define SPE_EVENT_DMA_ALIGNMENT 0x0008 /*A DMA alignment error */ -#define SPE_EVENT_SPE_ERROR 0x0010 /*An illegal instruction error*/ -#define SPE_EVENT_SPE_DATA_SEGMENT 0x0020 /*A DMA segmentation error */ -#define SPE_EVENT_SPE_DATA_STORAGE 0x0040 /*A DMA storage error */ -#define SPE_EVENT_INVALID_DMA 0x0800 /* Invalid MFC DMA */ - -/* - * Flags for sys_spu_create. - */ -#define SPU_CREATE_EVENTS_ENABLED 0x0001 -#define SPU_CREATE_GANG 0x0002 -#define SPU_CREATE_NOSCHED 0x0004 -#define SPU_CREATE_ISOLATE 0x0008 -#define SPU_CREATE_AFFINITY_SPU 0x0010 -#define SPU_CREATE_AFFINITY_MEM 0x0020 - -#define SPU_CREATE_FLAG_ALL 0x003f /* mask of all valid flags */ - - -int register_spu_syscalls(struct spufs_calls *calls); -void unregister_spu_syscalls(struct spufs_calls *calls); - -int spu_add_sysdev_attr(struct sysdev_attribute *attr); -void spu_remove_sysdev_attr(struct sysdev_attribute *attr); - -int spu_add_sysdev_attr_group(struct attribute_group *attrs); -void spu_remove_sysdev_attr_group(struct attribute_group *attrs); - -int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea, - unsigned long dsisr, unsigned *flt); - -/* - * Notifier blocks: - * - * oprofile can get notified when a context switch is performed - * on an spe. The notifer function that gets called is passed - * a pointer to the SPU structure as well as the object-id that - * identifies the binary running on that SPU now. - * - * For a context save, the object-id that is passed is zero, - * identifying that the kernel will run from that moment on. - * - * For a context restore, the object-id is the value written - * to object-id spufs file from user space and the notifer - * function can assume that spu->ctx is valid. - */ -struct notifier_block; -int spu_switch_event_register(struct notifier_block * n); -int spu_switch_event_unregister(struct notifier_block * n); - -extern void notify_spus_active(void); -extern void do_notify_spus_active(void); - -/* - * This defines the Local Store, Problem Area and Privilege Area of an SPU. - */ - -union mfc_tag_size_class_cmd { - struct { - u16 mfc_size; - u16 mfc_tag; - u8 pad; - u8 mfc_rclassid; - u16 mfc_cmd; - } u; - struct { - u32 mfc_size_tag32; - u32 mfc_class_cmd32; - } by32; - u64 all64; -}; - -struct mfc_cq_sr { - u64 mfc_cq_data0_RW; - u64 mfc_cq_data1_RW; - u64 mfc_cq_data2_RW; - u64 mfc_cq_data3_RW; -}; - -struct spu_problem { -#define MS_SYNC_PENDING 1L - u64 spc_mssync_RW; /* 0x0000 */ - u8 pad_0x0008_0x3000[0x3000 - 0x0008]; - - /* DMA Area */ - u8 pad_0x3000_0x3004[0x4]; /* 0x3000 */ - u32 mfc_lsa_W; /* 0x3004 */ - u64 mfc_ea_W; /* 0x3008 */ - union mfc_tag_size_class_cmd mfc_union_W; /* 0x3010 */ - u8 pad_0x3018_0x3104[0xec]; /* 0x3018 */ - u32 dma_qstatus_R; /* 0x3104 */ - u8 pad_0x3108_0x3204[0xfc]; /* 0x3108 */ - u32 dma_querytype_RW; /* 0x3204 */ - u8 pad_0x3208_0x321c[0x14]; /* 0x3208 */ - u32 dma_querymask_RW; /* 0x321c */ - u8 pad_0x3220_0x322c[0xc]; /* 0x3220 */ - u32 dma_tagstatus_R; /* 0x322c */ -#define DMA_TAGSTATUS_INTR_ANY 1u -#define DMA_TAGSTATUS_INTR_ALL 2u - u8 pad_0x3230_0x4000[0x4000 - 0x3230]; /* 0x3230 */ - - /* SPU Control Area */ - u8 pad_0x4000_0x4004[0x4]; /* 0x4000 */ - u32 pu_mb_R; /* 0x4004 */ - u8 pad_0x4008_0x400c[0x4]; /* 0x4008 */ - u32 spu_mb_W; /* 0x400c */ - u8 pad_0x4010_0x4014[0x4]; /* 0x4010 */ - u32 mb_stat_R; /* 0x4014 */ - u8 pad_0x4018_0x401c[0x4]; /* 0x4018 */ - u32 spu_runcntl_RW; /* 0x401c */ -#define SPU_RUNCNTL_STOP 0L -#define SPU_RUNCNTL_RUNNABLE 1L -#define SPU_RUNCNTL_ISOLATE 2L - u8 pad_0x4020_0x4024[0x4]; /* 0x4020 */ - u32 spu_status_R; /* 0x4024 */ -#define SPU_STOP_STATUS_SHIFT 16 -#define SPU_STATUS_STOPPED 0x0 -#define SPU_STATUS_RUNNING 0x1 -#define SPU_STATUS_STOPPED_BY_STOP 0x2 -#define SPU_STATUS_STOPPED_BY_HALT 0x4 -#define SPU_STATUS_WAITING_FOR_CHANNEL 0x8 -#define SPU_STATUS_SINGLE_STEP 0x10 -#define SPU_STATUS_INVALID_INSTR 0x20 -#define SPU_STATUS_INVALID_CH 0x40 -#define SPU_STATUS_ISOLATED_STATE 0x80 -#define SPU_STATUS_ISOLATED_LOAD_STATUS 0x200 -#define SPU_STATUS_ISOLATED_EXIT_STATUS 0x400 - u8 pad_0x4028_0x402c[0x4]; /* 0x4028 */ - u32 spu_spe_R; /* 0x402c */ - u8 pad_0x4030_0x4034[0x4]; /* 0x4030 */ - u32 spu_npc_RW; /* 0x4034 */ - u8 pad_0x4038_0x14000[0x14000 - 0x4038]; /* 0x4038 */ - - /* Signal Notification Area */ - u8 pad_0x14000_0x1400c[0xc]; /* 0x14000 */ - u32 signal_notify1; /* 0x1400c */ - u8 pad_0x14010_0x1c00c[0x7ffc]; /* 0x14010 */ - u32 signal_notify2; /* 0x1c00c */ -} __attribute__ ((aligned(0x20000))); - -/* SPU Privilege 2 State Area */ -struct spu_priv2 { - /* MFC Registers */ - u8 pad_0x0000_0x1100[0x1100 - 0x0000]; /* 0x0000 */ - - /* SLB Management Registers */ - u8 pad_0x1100_0x1108[0x8]; /* 0x1100 */ - u64 slb_index_W; /* 0x1108 */ -#define SLB_INDEX_MASK 0x7L - u64 slb_esid_RW; /* 0x1110 */ - u64 slb_vsid_RW; /* 0x1118 */ -#define SLB_VSID_SUPERVISOR_STATE (0x1ull << 11) -#define SLB_VSID_SUPERVISOR_STATE_MASK (0x1ull << 11) -#define SLB_VSID_PROBLEM_STATE (0x1ull << 10) -#define SLB_VSID_PROBLEM_STATE_MASK (0x1ull << 10) -#define SLB_VSID_EXECUTE_SEGMENT (0x1ull << 9) -#define SLB_VSID_NO_EXECUTE_SEGMENT (0x1ull << 9) -#define SLB_VSID_EXECUTE_SEGMENT_MASK (0x1ull << 9) -#define SLB_VSID_4K_PAGE (0x0 << 8) -#define SLB_VSID_LARGE_PAGE (0x1ull << 8) -#define SLB_VSID_PAGE_SIZE_MASK (0x1ull << 8) -#define SLB_VSID_CLASS_MASK (0x1ull << 7) -#define SLB_VSID_VIRTUAL_PAGE_SIZE_MASK (0x1ull << 6) - u64 slb_invalidate_entry_W; /* 0x1120 */ - u64 slb_invalidate_all_W; /* 0x1128 */ - u8 pad_0x1130_0x2000[0x2000 - 0x1130]; /* 0x1130 */ - - /* Context Save / Restore Area */ - struct mfc_cq_sr spuq[16]; /* 0x2000 */ - struct mfc_cq_sr puq[8]; /* 0x2200 */ - u8 pad_0x2300_0x3000[0x3000 - 0x2300]; /* 0x2300 */ - - /* MFC Control */ - u64 mfc_control_RW; /* 0x3000 */ -#define MFC_CNTL_RESUME_DMA_QUEUE (0ull << 0) -#define MFC_CNTL_SUSPEND_DMA_QUEUE (1ull << 0) -#define MFC_CNTL_SUSPEND_DMA_QUEUE_MASK (1ull << 0) -#define MFC_CNTL_SUSPEND_MASK (1ull << 4) -#define MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION (0ull << 8) -#define MFC_CNTL_SUSPEND_IN_PROGRESS (1ull << 8) -#define MFC_CNTL_SUSPEND_COMPLETE (3ull << 8) -#define MFC_CNTL_SUSPEND_DMA_STATUS_MASK (3ull << 8) -#define MFC_CNTL_DMA_QUEUES_EMPTY (1ull << 14) -#define MFC_CNTL_DMA_QUEUES_EMPTY_MASK (1ull << 14) -#define MFC_CNTL_PURGE_DMA_REQUEST (1ull << 15) -#define MFC_CNTL_PURGE_DMA_IN_PROGRESS (1ull << 24) -#define MFC_CNTL_PURGE_DMA_COMPLETE (3ull << 24) -#define MFC_CNTL_PURGE_DMA_STATUS_MASK (3ull << 24) -#define MFC_CNTL_RESTART_DMA_COMMAND (1ull << 32) -#define MFC_CNTL_DMA_COMMAND_REISSUE_PENDING (1ull << 32) -#define MFC_CNTL_DMA_COMMAND_REISSUE_STATUS_MASK (1ull << 32) -#define MFC_CNTL_MFC_PRIVILEGE_STATE (2ull << 33) -#define MFC_CNTL_MFC_PROBLEM_STATE (3ull << 33) -#define MFC_CNTL_MFC_KEY_PROTECTION_STATE_MASK (3ull << 33) -#define MFC_CNTL_DECREMENTER_HALTED (1ull << 35) -#define MFC_CNTL_DECREMENTER_RUNNING (1ull << 40) -#define MFC_CNTL_DECREMENTER_STATUS_MASK (1ull << 40) - u8 pad_0x3008_0x4000[0x4000 - 0x3008]; /* 0x3008 */ - - /* Interrupt Mailbox */ - u64 puint_mb_R; /* 0x4000 */ - u8 pad_0x4008_0x4040[0x4040 - 0x4008]; /* 0x4008 */ - - /* SPU Control */ - u64 spu_privcntl_RW; /* 0x4040 */ -#define SPU_PRIVCNTL_MODE_NORMAL (0x0ull << 0) -#define SPU_PRIVCNTL_MODE_SINGLE_STEP (0x1ull << 0) -#define SPU_PRIVCNTL_MODE_MASK (0x1ull << 0) -#define SPU_PRIVCNTL_NO_ATTENTION_EVENT (0x0ull << 1) -#define SPU_PRIVCNTL_ATTENTION_EVENT (0x1ull << 1) -#define SPU_PRIVCNTL_ATTENTION_EVENT_MASK (0x1ull << 1) -#define SPU_PRIVCNT_LOAD_REQUEST_NORMAL (0x0ull << 2) -#define SPU_PRIVCNT_LOAD_REQUEST_ENABLE_MASK (0x1ull << 2) - u8 pad_0x4048_0x4058[0x10]; /* 0x4048 */ - u64 spu_lslr_RW; /* 0x4058 */ - u64 spu_chnlcntptr_RW; /* 0x4060 */ - u64 spu_chnlcnt_RW; /* 0x4068 */ - u64 spu_chnldata_RW; /* 0x4070 */ - u64 spu_cfg_RW; /* 0x4078 */ - u8 pad_0x4080_0x5000[0x5000 - 0x4080]; /* 0x4080 */ - - /* PV2_ImplRegs: Implementation-specific privileged-state 2 regs */ - u64 spu_pm_trace_tag_status_RW; /* 0x5000 */ - u64 spu_tag_status_query_RW; /* 0x5008 */ -#define TAG_STATUS_QUERY_CONDITION_BITS (0x3ull << 32) -#define TAG_STATUS_QUERY_MASK_BITS (0xffffffffull) - u64 spu_cmd_buf1_RW; /* 0x5010 */ -#define SPU_COMMAND_BUFFER_1_LSA_BITS (0x7ffffull << 32) -#define SPU_COMMAND_BUFFER_1_EAH_BITS (0xffffffffull) - u64 spu_cmd_buf2_RW; /* 0x5018 */ -#define SPU_COMMAND_BUFFER_2_EAL_BITS ((0xffffffffull) << 32) -#define SPU_COMMAND_BUFFER_2_TS_BITS (0xffffull << 16) -#define SPU_COMMAND_BUFFER_2_TAG_BITS (0x3full) - u64 spu_atomic_status_RW; /* 0x5020 */ -} __attribute__ ((aligned(0x20000))); - -/* SPU Privilege 1 State Area */ -struct spu_priv1 { - /* Control and Configuration Area */ - u64 mfc_sr1_RW; /* 0x000 */ -#define MFC_STATE1_LOCAL_STORAGE_DECODE_MASK 0x01ull -#define MFC_STATE1_BUS_TLBIE_MASK 0x02ull -#define MFC_STATE1_REAL_MODE_OFFSET_ENABLE_MASK 0x04ull -#define MFC_STATE1_PROBLEM_STATE_MASK 0x08ull -#define MFC_STATE1_RELOCATE_MASK 0x10ull -#define MFC_STATE1_MASTER_RUN_CONTROL_MASK 0x20ull -#define MFC_STATE1_TABLE_SEARCH_MASK 0x40ull - u64 mfc_lpid_RW; /* 0x008 */ - u64 spu_idr_RW; /* 0x010 */ - u64 mfc_vr_RO; /* 0x018 */ -#define MFC_VERSION_BITS (0xffff << 16) -#define MFC_REVISION_BITS (0xffff) -#define MFC_GET_VERSION_BITS(vr) (((vr) & MFC_VERSION_BITS) >> 16) -#define MFC_GET_REVISION_BITS(vr) ((vr) & MFC_REVISION_BITS) - u64 spu_vr_RO; /* 0x020 */ -#define SPU_VERSION_BITS (0xffff << 16) -#define SPU_REVISION_BITS (0xffff) -#define SPU_GET_VERSION_BITS(vr) (vr & SPU_VERSION_BITS) >> 16 -#define SPU_GET_REVISION_BITS(vr) (vr & SPU_REVISION_BITS) - u8 pad_0x28_0x100[0x100 - 0x28]; /* 0x28 */ - - /* Interrupt Area */ - u64 int_mask_RW[3]; /* 0x100 */ -#define CLASS0_ENABLE_DMA_ALIGNMENT_INTR 0x1L -#define CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR 0x2L -#define CLASS0_ENABLE_SPU_ERROR_INTR 0x4L -#define CLASS0_ENABLE_MFC_FIR_INTR 0x8L -#define CLASS1_ENABLE_SEGMENT_FAULT_INTR 0x1L -#define CLASS1_ENABLE_STORAGE_FAULT_INTR 0x2L -#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_GET_INTR 0x4L -#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_PUT_INTR 0x8L -#define CLASS2_ENABLE_MAILBOX_INTR 0x1L -#define CLASS2_ENABLE_SPU_STOP_INTR 0x2L -#define CLASS2_ENABLE_SPU_HALT_INTR 0x4L -#define CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR 0x8L -#define CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR 0x10L - u8 pad_0x118_0x140[0x28]; /* 0x118 */ - u64 int_stat_RW[3]; /* 0x140 */ -#define CLASS0_DMA_ALIGNMENT_INTR 0x1L -#define CLASS0_INVALID_DMA_COMMAND_INTR 0x2L -#define CLASS0_SPU_ERROR_INTR 0x4L -#define CLASS0_INTR_MASK 0x7L -#define CLASS1_SEGMENT_FAULT_INTR 0x1L -#define CLASS1_STORAGE_FAULT_INTR 0x2L -#define CLASS1_LS_COMPARE_SUSPEND_ON_GET_INTR 0x4L -#define CLASS1_LS_COMPARE_SUSPEND_ON_PUT_INTR 0x8L -#define CLASS1_INTR_MASK 0xfL -#define CLASS2_MAILBOX_INTR 0x1L -#define CLASS2_SPU_STOP_INTR 0x2L -#define CLASS2_SPU_HALT_INTR 0x4L -#define CLASS2_SPU_DMA_TAG_GROUP_COMPLETE_INTR 0x8L -#define CLASS2_MAILBOX_THRESHOLD_INTR 0x10L -#define CLASS2_INTR_MASK 0x1fL - u8 pad_0x158_0x180[0x28]; /* 0x158 */ - u64 int_route_RW; /* 0x180 */ - - /* Interrupt Routing */ - u8 pad_0x188_0x200[0x200 - 0x188]; /* 0x188 */ - - /* Atomic Unit Control Area */ - u64 mfc_atomic_flush_RW; /* 0x200 */ -#define mfc_atomic_flush_enable 0x1L - u8 pad_0x208_0x280[0x78]; /* 0x208 */ - u64 resource_allocation_groupID_RW; /* 0x280 */ - u64 resource_allocation_enable_RW; /* 0x288 */ - u8 pad_0x290_0x3c8[0x3c8 - 0x290]; /* 0x290 */ - - /* SPU_Cache_ImplRegs: Implementation-dependent cache registers */ - - u64 smf_sbi_signal_sel; /* 0x3c8 */ -#define smf_sbi_mask_lsb 56 -#define smf_sbi_shift (63 - smf_sbi_mask_lsb) -#define smf_sbi_mask (0x301LL << smf_sbi_shift) -#define smf_sbi_bus0_bits (0x001LL << smf_sbi_shift) -#define smf_sbi_bus2_bits (0x100LL << smf_sbi_shift) -#define smf_sbi2_bus0_bits (0x201LL << smf_sbi_shift) -#define smf_sbi2_bus2_bits (0x300LL << smf_sbi_shift) - u64 smf_ato_signal_sel; /* 0x3d0 */ -#define smf_ato_mask_lsb 35 -#define smf_ato_shift (63 - smf_ato_mask_lsb) -#define smf_ato_mask (0x3LL << smf_ato_shift) -#define smf_ato_bus0_bits (0x2LL << smf_ato_shift) -#define smf_ato_bus2_bits (0x1LL << smf_ato_shift) - u8 pad_0x3d8_0x400[0x400 - 0x3d8]; /* 0x3d8 */ - - /* TLB Management Registers */ - u64 mfc_sdr_RW; /* 0x400 */ - u8 pad_0x408_0x500[0xf8]; /* 0x408 */ - u64 tlb_index_hint_RO; /* 0x500 */ - u64 tlb_index_W; /* 0x508 */ - u64 tlb_vpn_RW; /* 0x510 */ - u64 tlb_rpn_RW; /* 0x518 */ - u8 pad_0x520_0x540[0x20]; /* 0x520 */ - u64 tlb_invalidate_entry_W; /* 0x540 */ - u64 tlb_invalidate_all_W; /* 0x548 */ - u8 pad_0x550_0x580[0x580 - 0x550]; /* 0x550 */ - - /* SPU_MMU_ImplRegs: Implementation-dependent MMU registers */ - u64 smm_hid; /* 0x580 */ -#define PAGE_SIZE_MASK 0xf000000000000000ull -#define PAGE_SIZE_16MB_64KB 0x2000000000000000ull - u8 pad_0x588_0x600[0x600 - 0x588]; /* 0x588 */ - - /* MFC Status/Control Area */ - u64 mfc_accr_RW; /* 0x600 */ -#define MFC_ACCR_EA_ACCESS_GET (1 << 0) -#define MFC_ACCR_EA_ACCESS_PUT (1 << 1) -#define MFC_ACCR_LS_ACCESS_GET (1 << 3) -#define MFC_ACCR_LS_ACCESS_PUT (1 << 4) - u8 pad_0x608_0x610[0x8]; /* 0x608 */ - u64 mfc_dsisr_RW; /* 0x610 */ -#define MFC_DSISR_PTE_NOT_FOUND (1 << 30) -#define MFC_DSISR_ACCESS_DENIED (1 << 27) -#define MFC_DSISR_ATOMIC (1 << 26) -#define MFC_DSISR_ACCESS_PUT (1 << 25) -#define MFC_DSISR_ADDR_MATCH (1 << 22) -#define MFC_DSISR_LS (1 << 17) -#define MFC_DSISR_L (1 << 16) -#define MFC_DSISR_ADDRESS_OVERFLOW (1 << 0) - u8 pad_0x618_0x620[0x8]; /* 0x618 */ - u64 mfc_dar_RW; /* 0x620 */ - u8 pad_0x628_0x700[0x700 - 0x628]; /* 0x628 */ - - /* Replacement Management Table (RMT) Area */ - u64 rmt_index_RW; /* 0x700 */ - u8 pad_0x708_0x710[0x8]; /* 0x708 */ - u64 rmt_data1_RW; /* 0x710 */ - u8 pad_0x718_0x800[0x800 - 0x718]; /* 0x718 */ - - /* Control/Configuration Registers */ - u64 mfc_dsir_R; /* 0x800 */ -#define MFC_DSIR_Q (1 << 31) -#define MFC_DSIR_SPU_QUEUE MFC_DSIR_Q - u64 mfc_lsacr_RW; /* 0x808 */ -#define MFC_LSACR_COMPARE_MASK ((~0ull) << 32) -#define MFC_LSACR_COMPARE_ADDR ((~0ull) >> 32) - u64 mfc_lscrr_R; /* 0x810 */ -#define MFC_LSCRR_Q (1 << 31) -#define MFC_LSCRR_SPU_QUEUE MFC_LSCRR_Q -#define MFC_LSCRR_QI_SHIFT 32 -#define MFC_LSCRR_QI_MASK ((~0ull) << MFC_LSCRR_QI_SHIFT) - u8 pad_0x818_0x820[0x8]; /* 0x818 */ - u64 mfc_tclass_id_RW; /* 0x820 */ -#define MFC_TCLASS_ID_ENABLE (1L << 0L) -#define MFC_TCLASS_SLOT2_ENABLE (1L << 5L) -#define MFC_TCLASS_SLOT1_ENABLE (1L << 6L) -#define MFC_TCLASS_SLOT0_ENABLE (1L << 7L) -#define MFC_TCLASS_QUOTA_2_SHIFT 8L -#define MFC_TCLASS_QUOTA_1_SHIFT 16L -#define MFC_TCLASS_QUOTA_0_SHIFT 24L -#define MFC_TCLASS_QUOTA_2_MASK (0x1FL << MFC_TCLASS_QUOTA_2_SHIFT) -#define MFC_TCLASS_QUOTA_1_MASK (0x1FL << MFC_TCLASS_QUOTA_1_SHIFT) -#define MFC_TCLASS_QUOTA_0_MASK (0x1FL << MFC_TCLASS_QUOTA_0_SHIFT) - u8 pad_0x828_0x900[0x900 - 0x828]; /* 0x828 */ - - /* Real Mode Support Registers */ - u64 mfc_rm_boundary; /* 0x900 */ - u8 pad_0x908_0x938[0x30]; /* 0x908 */ - u64 smf_dma_signal_sel; /* 0x938 */ -#define mfc_dma1_mask_lsb 41 -#define mfc_dma1_shift (63 - mfc_dma1_mask_lsb) -#define mfc_dma1_mask (0x3LL << mfc_dma1_shift) -#define mfc_dma1_bits (0x1LL << mfc_dma1_shift) -#define mfc_dma2_mask_lsb 43 -#define mfc_dma2_shift (63 - mfc_dma2_mask_lsb) -#define mfc_dma2_mask (0x3LL << mfc_dma2_shift) -#define mfc_dma2_bits (0x1LL << mfc_dma2_shift) - u8 pad_0x940_0xa38[0xf8]; /* 0x940 */ - u64 smm_signal_sel; /* 0xa38 */ -#define smm_sig_mask_lsb 12 -#define smm_sig_shift (63 - smm_sig_mask_lsb) -#define smm_sig_mask (0x3LL << smm_sig_shift) -#define smm_sig_bus0_bits (0x2LL << smm_sig_shift) -#define smm_sig_bus2_bits (0x1LL << smm_sig_shift) - u8 pad_0xa40_0xc00[0xc00 - 0xa40]; /* 0xa40 */ - - /* DMA Command Error Area */ - u64 mfc_cer_R; /* 0xc00 */ -#define MFC_CER_Q (1 << 31) -#define MFC_CER_SPU_QUEUE MFC_CER_Q - u8 pad_0xc08_0x1000[0x1000 - 0xc08]; /* 0xc08 */ - - /* PV1_ImplRegs: Implementation-dependent privileged-state 1 regs */ - /* DMA Command Error Area */ - u64 spu_ecc_cntl_RW; /* 0x1000 */ -#define SPU_ECC_CNTL_E (1ull << 0ull) -#define SPU_ECC_CNTL_ENABLE SPU_ECC_CNTL_E -#define SPU_ECC_CNTL_DISABLE (~SPU_ECC_CNTL_E & 1L) -#define SPU_ECC_CNTL_S (1ull << 1ull) -#define SPU_ECC_STOP_AFTER_ERROR SPU_ECC_CNTL_S -#define SPU_ECC_CONTINUE_AFTER_ERROR (~SPU_ECC_CNTL_S & 2L) -#define SPU_ECC_CNTL_B (1ull << 2ull) -#define SPU_ECC_BACKGROUND_ENABLE SPU_ECC_CNTL_B -#define SPU_ECC_BACKGROUND_DISABLE (~SPU_ECC_CNTL_B & 4L) -#define SPU_ECC_CNTL_I_SHIFT 3ull -#define SPU_ECC_CNTL_I_MASK (3ull << SPU_ECC_CNTL_I_SHIFT) -#define SPU_ECC_WRITE_ALWAYS (~SPU_ECC_CNTL_I & 12L) -#define SPU_ECC_WRITE_CORRECTABLE (1ull << SPU_ECC_CNTL_I_SHIFT) -#define SPU_ECC_WRITE_UNCORRECTABLE (3ull << SPU_ECC_CNTL_I_SHIFT) -#define SPU_ECC_CNTL_D (1ull << 5ull) -#define SPU_ECC_DETECTION_ENABLE SPU_ECC_CNTL_D -#define SPU_ECC_DETECTION_DISABLE (~SPU_ECC_CNTL_D & 32L) - u64 spu_ecc_stat_RW; /* 0x1008 */ -#define SPU_ECC_CORRECTED_ERROR (1ull << 0ul) -#define SPU_ECC_UNCORRECTED_ERROR (1ull << 1ul) -#define SPU_ECC_SCRUB_COMPLETE (1ull << 2ul) -#define SPU_ECC_SCRUB_IN_PROGRESS (1ull << 3ul) -#define SPU_ECC_INSTRUCTION_ERROR (1ull << 4ul) -#define SPU_ECC_DATA_ERROR (1ull << 5ul) -#define SPU_ECC_DMA_ERROR (1ull << 6ul) -#define SPU_ECC_STATUS_CNT_MASK (256ull << 8) - u64 spu_ecc_addr_RW; /* 0x1010 */ - u64 spu_err_mask_RW; /* 0x1018 */ -#define SPU_ERR_ILLEGAL_INSTR (1ull << 0ul) -#define SPU_ERR_ILLEGAL_CHANNEL (1ull << 1ul) - u8 pad_0x1020_0x1028[0x1028 - 0x1020]; /* 0x1020 */ - - /* SPU Debug-Trace Bus (DTB) Selection Registers */ - u64 spu_trig0_sel; /* 0x1028 */ - u64 spu_trig1_sel; /* 0x1030 */ - u64 spu_trig2_sel; /* 0x1038 */ - u64 spu_trig3_sel; /* 0x1040 */ - u64 spu_trace_sel; /* 0x1048 */ -#define spu_trace_sel_mask 0x1f1fLL -#define spu_trace_sel_bus0_bits 0x1000LL -#define spu_trace_sel_bus2_bits 0x0010LL - u64 spu_event0_sel; /* 0x1050 */ - u64 spu_event1_sel; /* 0x1058 */ - u64 spu_event2_sel; /* 0x1060 */ - u64 spu_event3_sel; /* 0x1068 */ - u64 spu_trace_cntl; /* 0x1070 */ -} __attribute__ ((aligned(0x2000))); - -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h deleted file mode 100644 index a40fd491250c..000000000000 --- a/include/asm-powerpc/spu_csa.h +++ /dev/null @@ -1,266 +0,0 @@ -/* - * spu_csa.h: Definitions for SPU context save area (CSA). - * - * (C) Copyright IBM 2005 - * - * Author: Mark Nutter - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _SPU_CSA_H_ -#define _SPU_CSA_H_ -#ifdef __KERNEL__ - -/* - * Total number of 128-bit registers. - */ -#define NR_SPU_GPRS 128 -#define NR_SPU_SPRS 9 -#define NR_SPU_REGS_PAD 7 -#define NR_SPU_SPILL_REGS 144 /* GPRS + SPRS + PAD */ -#define SIZEOF_SPU_SPILL_REGS NR_SPU_SPILL_REGS * 16 - -#define SPU_SAVE_COMPLETE 0x3FFB -#define SPU_RESTORE_COMPLETE 0x3FFC - -/* - * Definitions for various 'stopped' status conditions, - * to be recreated during context restore. - */ -#define SPU_STOPPED_STATUS_P 1 -#define SPU_STOPPED_STATUS_I 2 -#define SPU_STOPPED_STATUS_H 3 -#define SPU_STOPPED_STATUS_S 4 -#define SPU_STOPPED_STATUS_S_I 5 -#define SPU_STOPPED_STATUS_S_P 6 -#define SPU_STOPPED_STATUS_P_H 7 -#define SPU_STOPPED_STATUS_P_I 8 -#define SPU_STOPPED_STATUS_R 9 - -/* - * Definitions for software decrementer status flag. - */ -#define SPU_DECR_STATUS_RUNNING 0x1 -#define SPU_DECR_STATUS_WRAPPED 0x2 - -#ifndef __ASSEMBLY__ -/** - * spu_reg128 - generic 128-bit register definition. - */ -struct spu_reg128 { - u32 slot[4]; -}; - -/** - * struct spu_lscsa - Local Store Context Save Area. - * @gprs: Array of saved registers. - * @fpcr: Saved floating point status control register. - * @decr: Saved decrementer value. - * @decr_status: Indicates software decrementer status flags. - * @ppu_mb: Saved PPU mailbox data. - * @ppuint_mb: Saved PPU interrupting mailbox data. - * @tag_mask: Saved tag group mask. - * @event_mask: Saved event mask. - * @srr0: Saved SRR0. - * @stopped_status: Conditions to be recreated by restore. - * @ls: Saved contents of Local Storage Area. - * - * The LSCSA represents state that is primarily saved and - * restored by SPU-side code. - */ -struct spu_lscsa { - struct spu_reg128 gprs[128]; - struct spu_reg128 fpcr; - struct spu_reg128 decr; - struct spu_reg128 decr_status; - struct spu_reg128 ppu_mb; - struct spu_reg128 ppuint_mb; - struct spu_reg128 tag_mask; - struct spu_reg128 event_mask; - struct spu_reg128 srr0; - struct spu_reg128 stopped_status; - - /* - * 'ls' must be page-aligned on all configurations. - * Since we don't want to rely on having the spu-gcc - * installed to build the kernel and this structure - * is used in the SPU-side code, make it 64k-page - * aligned for now. - */ - unsigned char ls[LS_SIZE] __attribute__((aligned(65536))); -}; - -#ifndef __SPU__ -/* - * struct spu_problem_collapsed - condensed problem state area, w/o pads. - */ -struct spu_problem_collapsed { - u64 spc_mssync_RW; - u32 mfc_lsa_W; - u32 unused_pad0; - u64 mfc_ea_W; - union mfc_tag_size_class_cmd mfc_union_W; - u32 dma_qstatus_R; - u32 dma_querytype_RW; - u32 dma_querymask_RW; - u32 dma_tagstatus_R; - u32 pu_mb_R; - u32 spu_mb_W; - u32 mb_stat_R; - u32 spu_runcntl_RW; - u32 spu_status_R; - u32 spu_spc_R; - u32 spu_npc_RW; - u32 signal_notify1; - u32 signal_notify2; - u32 unused_pad1; -}; - -/* - * struct spu_priv1_collapsed - condensed privileged 1 area, w/o pads. - */ -struct spu_priv1_collapsed { - u64 mfc_sr1_RW; - u64 mfc_lpid_RW; - u64 spu_idr_RW; - u64 mfc_vr_RO; - u64 spu_vr_RO; - u64 int_mask_class0_RW; - u64 int_mask_class1_RW; - u64 int_mask_class2_RW; - u64 int_stat_class0_RW; - u64 int_stat_class1_RW; - u64 int_stat_class2_RW; - u64 int_route_RW; - u64 mfc_atomic_flush_RW; - u64 resource_allocation_groupID_RW; - u64 resource_allocation_enable_RW; - u64 mfc_fir_R; - u64 mfc_fir_status_or_W; - u64 mfc_fir_status_and_W; - u64 mfc_fir_mask_R; - u64 mfc_fir_mask_or_W; - u64 mfc_fir_mask_and_W; - u64 mfc_fir_chkstp_enable_RW; - u64 smf_sbi_signal_sel; - u64 smf_ato_signal_sel; - u64 tlb_index_hint_RO; - u64 tlb_index_W; - u64 tlb_vpn_RW; - u64 tlb_rpn_RW; - u64 tlb_invalidate_entry_W; - u64 tlb_invalidate_all_W; - u64 smm_hid; - u64 mfc_accr_RW; - u64 mfc_dsisr_RW; - u64 mfc_dar_RW; - u64 rmt_index_RW; - u64 rmt_data1_RW; - u64 mfc_dsir_R; - u64 mfc_lsacr_RW; - u64 mfc_lscrr_R; - u64 mfc_tclass_id_RW; - u64 mfc_rm_boundary; - u64 smf_dma_signal_sel; - u64 smm_signal_sel; - u64 mfc_cer_R; - u64 pu_ecc_cntl_RW; - u64 pu_ecc_stat_RW; - u64 spu_ecc_addr_RW; - u64 spu_err_mask_RW; - u64 spu_trig0_sel; - u64 spu_trig1_sel; - u64 spu_trig2_sel; - u64 spu_trig3_sel; - u64 spu_trace_sel; - u64 spu_event0_sel; - u64 spu_event1_sel; - u64 spu_event2_sel; - u64 spu_event3_sel; - u64 spu_trace_cntl; -}; - -/* - * struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads. - */ -struct spu_priv2_collapsed { - u64 slb_index_W; - u64 slb_esid_RW; - u64 slb_vsid_RW; - u64 slb_invalidate_entry_W; - u64 slb_invalidate_all_W; - struct mfc_cq_sr spuq[16]; - struct mfc_cq_sr puq[8]; - u64 mfc_control_RW; - u64 puint_mb_R; - u64 spu_privcntl_RW; - u64 spu_lslr_RW; - u64 spu_chnlcntptr_RW; - u64 spu_chnlcnt_RW; - u64 spu_chnldata_RW; - u64 spu_cfg_RW; - u64 spu_tag_status_query_RW; - u64 spu_cmd_buf1_RW; - u64 spu_cmd_buf2_RW; - u64 spu_atomic_status_RW; -}; - -/** - * struct spu_state - * @lscsa: Local Store Context Save Area. - * @prob: Collapsed Problem State Area, w/o pads. - * @priv1: Collapsed Privileged 1 Area, w/o pads. - * @priv2: Collapsed Privileged 2 Area, w/o pads. - * @spu_chnlcnt_RW: Array of saved channel counts. - * @spu_chnldata_RW: Array of saved channel data. - * @suspend_time: Time stamp when decrementer disabled. - * - * Structure representing the whole of the SPU - * context save area (CSA). This struct contains - * all of the state necessary to suspend and then - * later optionally resume execution of an SPU - * context. - * - * The @lscsa region is by far the largest, and is - * allocated separately so that it may either be - * pinned or mapped to/from application memory, as - * appropriate for the OS environment. - */ -struct spu_state { - struct spu_lscsa *lscsa; -#ifdef CONFIG_SPU_FS_64K_LS - int use_big_pages; - /* One struct page per 64k page */ -#define SPU_LSCSA_NUM_BIG_PAGES (sizeof(struct spu_lscsa) / 0x10000) - struct page *lscsa_pages[SPU_LSCSA_NUM_BIG_PAGES]; -#endif - struct spu_problem_collapsed prob; - struct spu_priv1_collapsed priv1; - struct spu_priv2_collapsed priv2; - u64 spu_chnlcnt_RW[32]; - u64 spu_chnldata_RW[32]; - u32 spu_mailbox_data[4]; - u32 pu_mailbox_data[1]; - u64 class_0_dar, class_0_pending; - u64 class_1_dar, class_1_dsisr; - unsigned long suspend_time; - spinlock_t register_lock; -}; - -#endif /* !__SPU__ */ -#endif /* __KERNEL__ */ -#endif /* !__ASSEMBLY__ */ -#endif /* _SPU_CSA_H_ */ diff --git a/include/asm-powerpc/spu_info.h b/include/asm-powerpc/spu_info.h deleted file mode 100644 index 3545efbf9891..000000000000 --- a/include/asm-powerpc/spu_info.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * SPU info structures - * - * (C) Copyright 2006 IBM Corp. - * - * Author: Dwayne Grant McConnell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _SPU_INFO_H -#define _SPU_INFO_H - -#ifdef __KERNEL__ -#include -#include -#else -struct mfc_cq_sr { - __u64 mfc_cq_data0_RW; - __u64 mfc_cq_data1_RW; - __u64 mfc_cq_data2_RW; - __u64 mfc_cq_data3_RW; -}; -#endif /* __KERNEL__ */ - -struct spu_dma_info { - __u64 dma_info_type; - __u64 dma_info_mask; - __u64 dma_info_status; - __u64 dma_info_stall_and_notify; - __u64 dma_info_atomic_command_status; - struct mfc_cq_sr dma_info_command_data[16]; -}; - -struct spu_proxydma_info { - __u64 proxydma_info_type; - __u64 proxydma_info_mask; - __u64 proxydma_info_status; - struct mfc_cq_sr proxydma_info_command_data[8]; -}; - -#endif diff --git a/include/asm-powerpc/spu_priv1.h b/include/asm-powerpc/spu_priv1.h deleted file mode 100644 index 25020a34ce7f..000000000000 --- a/include/asm-powerpc/spu_priv1.h +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Defines an spu hypervisor abstraction layer. - * - * Copyright 2006 Sony Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if !defined(_SPU_PRIV1_H) -#define _SPU_PRIV1_H -#if defined(__KERNEL__) - -#include - -struct spu; -struct spu_context; - -/* access to priv1 registers */ - -struct spu_priv1_ops { - void (*int_mask_and) (struct spu *spu, int class, u64 mask); - void (*int_mask_or) (struct spu *spu, int class, u64 mask); - void (*int_mask_set) (struct spu *spu, int class, u64 mask); - u64 (*int_mask_get) (struct spu *spu, int class); - void (*int_stat_clear) (struct spu *spu, int class, u64 stat); - u64 (*int_stat_get) (struct spu *spu, int class); - void (*cpu_affinity_set) (struct spu *spu, int cpu); - u64 (*mfc_dar_get) (struct spu *spu); - u64 (*mfc_dsisr_get) (struct spu *spu); - void (*mfc_dsisr_set) (struct spu *spu, u64 dsisr); - void (*mfc_sdr_setup) (struct spu *spu); - void (*mfc_sr1_set) (struct spu *spu, u64 sr1); - u64 (*mfc_sr1_get) (struct spu *spu); - void (*mfc_tclass_id_set) (struct spu *spu, u64 tclass_id); - u64 (*mfc_tclass_id_get) (struct spu *spu); - void (*tlb_invalidate) (struct spu *spu); - void (*resource_allocation_groupID_set) (struct spu *spu, u64 id); - u64 (*resource_allocation_groupID_get) (struct spu *spu); - void (*resource_allocation_enable_set) (struct spu *spu, u64 enable); - u64 (*resource_allocation_enable_get) (struct spu *spu); -}; - -extern const struct spu_priv1_ops* spu_priv1_ops; - -static inline void -spu_int_mask_and (struct spu *spu, int class, u64 mask) -{ - spu_priv1_ops->int_mask_and(spu, class, mask); -} - -static inline void -spu_int_mask_or (struct spu *spu, int class, u64 mask) -{ - spu_priv1_ops->int_mask_or(spu, class, mask); -} - -static inline void -spu_int_mask_set (struct spu *spu, int class, u64 mask) -{ - spu_priv1_ops->int_mask_set(spu, class, mask); -} - -static inline u64 -spu_int_mask_get (struct spu *spu, int class) -{ - return spu_priv1_ops->int_mask_get(spu, class); -} - -static inline void -spu_int_stat_clear (struct spu *spu, int class, u64 stat) -{ - spu_priv1_ops->int_stat_clear(spu, class, stat); -} - -static inline u64 -spu_int_stat_get (struct spu *spu, int class) -{ - return spu_priv1_ops->int_stat_get (spu, class); -} - -static inline void -spu_cpu_affinity_set (struct spu *spu, int cpu) -{ - spu_priv1_ops->cpu_affinity_set(spu, cpu); -} - -static inline u64 -spu_mfc_dar_get (struct spu *spu) -{ - return spu_priv1_ops->mfc_dar_get(spu); -} - -static inline u64 -spu_mfc_dsisr_get (struct spu *spu) -{ - return spu_priv1_ops->mfc_dsisr_get(spu); -} - -static inline void -spu_mfc_dsisr_set (struct spu *spu, u64 dsisr) -{ - spu_priv1_ops->mfc_dsisr_set(spu, dsisr); -} - -static inline void -spu_mfc_sdr_setup (struct spu *spu) -{ - spu_priv1_ops->mfc_sdr_setup(spu); -} - -static inline void -spu_mfc_sr1_set (struct spu *spu, u64 sr1) -{ - spu_priv1_ops->mfc_sr1_set(spu, sr1); -} - -static inline u64 -spu_mfc_sr1_get (struct spu *spu) -{ - return spu_priv1_ops->mfc_sr1_get(spu); -} - -static inline void -spu_mfc_tclass_id_set (struct spu *spu, u64 tclass_id) -{ - spu_priv1_ops->mfc_tclass_id_set(spu, tclass_id); -} - -static inline u64 -spu_mfc_tclass_id_get (struct spu *spu) -{ - return spu_priv1_ops->mfc_tclass_id_get(spu); -} - -static inline void -spu_tlb_invalidate (struct spu *spu) -{ - spu_priv1_ops->tlb_invalidate(spu); -} - -static inline void -spu_resource_allocation_groupID_set (struct spu *spu, u64 id) -{ - spu_priv1_ops->resource_allocation_groupID_set(spu, id); -} - -static inline u64 -spu_resource_allocation_groupID_get (struct spu *spu) -{ - return spu_priv1_ops->resource_allocation_groupID_get(spu); -} - -static inline void -spu_resource_allocation_enable_set (struct spu *spu, u64 enable) -{ - spu_priv1_ops->resource_allocation_enable_set(spu, enable); -} - -static inline u64 -spu_resource_allocation_enable_get (struct spu *spu) -{ - return spu_priv1_ops->resource_allocation_enable_get(spu); -} - -/* spu management abstraction */ - -struct spu_management_ops { - int (*enumerate_spus)(int (*fn)(void *data)); - int (*create_spu)(struct spu *spu, void *data); - int (*destroy_spu)(struct spu *spu); - void (*enable_spu)(struct spu_context *ctx); - void (*disable_spu)(struct spu_context *ctx); - int (*init_affinity)(void); -}; - -extern const struct spu_management_ops* spu_management_ops; - -static inline int -spu_enumerate_spus (int (*fn)(void *data)) -{ - return spu_management_ops->enumerate_spus(fn); -} - -static inline int -spu_create_spu (struct spu *spu, void *data) -{ - return spu_management_ops->create_spu(spu, data); -} - -static inline int -spu_destroy_spu (struct spu *spu) -{ - return spu_management_ops->destroy_spu(spu); -} - -static inline int -spu_init_affinity (void) -{ - return spu_management_ops->init_affinity(); -} - -static inline void -spu_enable_spu (struct spu_context *ctx) -{ - spu_management_ops->enable_spu(ctx); -} - -static inline void -spu_disable_spu (struct spu_context *ctx) -{ - spu_management_ops->disable_spu(ctx); -} - -/* - * The declarations folowing are put here for convenience - * and only intended to be used by the platform setup code. - */ - -extern const struct spu_priv1_ops spu_priv1_mmio_ops; -extern const struct spu_priv1_ops spu_priv1_beat_ops; - -extern const struct spu_management_ops spu_management_of_ops; - -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-powerpc/sstep.h b/include/asm-powerpc/sstep.h deleted file mode 100644 index f593b0f9b627..000000000000 --- a/include/asm-powerpc/sstep.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2004 Paul Mackerras , IBM - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -struct pt_regs; - -/* - * We don't allow single-stepping an mtmsrd that would clear - * MSR_RI, since that would make the exception unrecoverable. - * Since we need to single-step to proceed from a breakpoint, - * we don't allow putting a breakpoint on an mtmsrd instruction. - * Similarly we don't allow breakpoints on rfid instructions. - * These macros tell us if an instruction is a mtmsrd or rfid. - * Note that IS_MTMSRD returns true for both an mtmsr (32-bit) - * and an mtmsrd (64-bit). - */ -#define IS_MTMSRD(instr) (((instr) & 0xfc0007be) == 0x7c000124) -#define IS_RFID(instr) (((instr) & 0xfc0007fe) == 0x4c000024) -#define IS_RFI(instr) (((instr) & 0xfc0007fe) == 0x4c000064) - -/* Emulate instructions that cause a transfer of control. */ -extern int emulate_step(struct pt_regs *regs, unsigned int instr); diff --git a/include/asm-powerpc/stat.h b/include/asm-powerpc/stat.h deleted file mode 100644 index e4edc510b530..000000000000 --- a/include/asm-powerpc/stat.h +++ /dev/null @@ -1,81 +0,0 @@ -#ifndef _ASM_POWERPC_STAT_H -#define _ASM_POWERPC_STAT_H -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include - -#define STAT_HAVE_NSEC 1 - -#ifndef __powerpc64__ -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; -#endif /* !__powerpc64__ */ - -struct stat { - unsigned long st_dev; - ino_t st_ino; -#ifdef __powerpc64__ - nlink_t st_nlink; - mode_t st_mode; -#else - mode_t st_mode; - nlink_t st_nlink; -#endif - uid_t st_uid; - gid_t st_gid; - unsigned long st_rdev; - off_t st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -#ifdef __powerpc64__ - unsigned long __unused6; -#endif -}; - -/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */ -struct stat64 { - unsigned long long st_dev; /* Device. */ - unsigned long long st_ino; /* File serial number. */ - unsigned int st_mode; /* File mode. */ - unsigned int st_nlink; /* Link count. */ - unsigned int st_uid; /* User ID of the file's owner. */ - unsigned int st_gid; /* Group ID of the file's group. */ - unsigned long long st_rdev; /* Device number, if device. */ - unsigned short __pad2; - long long st_size; /* Size of file, in bytes. */ - int st_blksize; /* Optimal block size for I/O. */ - long long st_blocks; /* Number 512-byte blocks allocated. */ - int st_atime; /* Time of last access. */ - unsigned int st_atime_nsec; - int st_mtime; /* Time of last modification. */ - unsigned int st_mtime_nsec; - int st_ctime; /* Time of last status change. */ - unsigned int st_ctime_nsec; - unsigned int __unused4; - unsigned int __unused5; -}; - -#endif /* _ASM_POWERPC_STAT_H */ diff --git a/include/asm-powerpc/statfs.h b/include/asm-powerpc/statfs.h deleted file mode 100644 index 67024026c10d..000000000000 --- a/include/asm-powerpc/statfs.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef _ASM_POWERPC_STATFS_H -#define _ASM_POWERPC_STATFS_H - -/* For ppc32 we just use the generic definitions, not so simple on ppc64 */ - -#ifndef __powerpc64__ -#include -#else - -#ifndef __KERNEL_STRICT_NAMES -#include -typedef __kernel_fsid_t fsid_t; -#endif - -/* - * We're already 64-bit, so duplicate the definition - */ -struct statfs { - long f_type; - long f_bsize; - long f_blocks; - long f_bfree; - long f_bavail; - long f_files; - long f_ffree; - __kernel_fsid_t f_fsid; - long f_namelen; - long f_frsize; - long f_spare[5]; -}; - -struct statfs64 { - long f_type; - long f_bsize; - long f_blocks; - long f_bfree; - long f_bavail; - long f_files; - long f_ffree; - __kernel_fsid_t f_fsid; - long f_namelen; - long f_frsize; - long f_spare[5]; -}; - -struct compat_statfs64 { - __u32 f_type; - __u32 f_bsize; - __u64 f_blocks; - __u64 f_bfree; - __u64 f_bavail; - __u64 f_files; - __u64 f_ffree; - __kernel_fsid_t f_fsid; - __u32 f_namelen; - __u32 f_frsize; - __u32 f_spare[5]; -}; -#endif /* ! __powerpc64__ */ -#endif diff --git a/include/asm-powerpc/string.h b/include/asm-powerpc/string.h deleted file mode 100644 index e40010abcaf1..000000000000 --- a/include/asm-powerpc/string.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef _ASM_POWERPC_STRING_H -#define _ASM_POWERPC_STRING_H - -#ifdef __KERNEL__ - -#define __HAVE_ARCH_STRCPY -#define __HAVE_ARCH_STRNCPY -#define __HAVE_ARCH_STRLEN -#define __HAVE_ARCH_STRCMP -#define __HAVE_ARCH_STRNCMP -#define __HAVE_ARCH_STRCAT -#define __HAVE_ARCH_MEMSET -#define __HAVE_ARCH_MEMCPY -#define __HAVE_ARCH_MEMMOVE -#define __HAVE_ARCH_MEMCMP -#define __HAVE_ARCH_MEMCHR - -extern char * strcpy(char *,const char *); -extern char * strncpy(char *,const char *, __kernel_size_t); -extern __kernel_size_t strlen(const char *); -extern int strcmp(const char *,const char *); -extern int strncmp(const char *, const char *, __kernel_size_t); -extern char * strcat(char *, const char *); -extern void * memset(void *,int,__kernel_size_t); -extern void * memcpy(void *,const void *,__kernel_size_t); -extern void * memmove(void *,const void *,__kernel_size_t); -extern int memcmp(const void *,const void *,__kernel_size_t); -extern void * memchr(const void *,int,__kernel_size_t); - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_STRING_H */ diff --git a/include/asm-powerpc/suspend.h b/include/asm-powerpc/suspend.h deleted file mode 100644 index cbf2c9404c37..000000000000 --- a/include/asm-powerpc/suspend.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_POWERPC_SUSPEND_H -#define __ASM_POWERPC_SUSPEND_H - -static inline int arch_prepare_suspend(void) { return 0; } - -void save_processor_state(void); -void restore_processor_state(void); - -#endif /* __ASM_POWERPC_SUSPEND_H */ diff --git a/include/asm-powerpc/synch.h b/include/asm-powerpc/synch.h deleted file mode 100644 index 45963e80f557..000000000000 --- a/include/asm-powerpc/synch.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef _ASM_POWERPC_SYNCH_H -#define _ASM_POWERPC_SYNCH_H -#ifdef __KERNEL__ - -#include -#include - -#ifndef __ASSEMBLY__ -extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup; -extern void do_lwsync_fixups(unsigned long value, void *fixup_start, - void *fixup_end); - -static inline void eieio(void) -{ - __asm__ __volatile__ ("eieio" : : : "memory"); -} - -static inline void isync(void) -{ - __asm__ __volatile__ ("isync" : : : "memory"); -} -#endif /* __ASSEMBLY__ */ - -#if defined(__powerpc64__) -# define LWSYNC lwsync -#elif defined(CONFIG_E500) -# define LWSYNC \ - START_LWSYNC_SECTION(96); \ - sync; \ - MAKE_LWSYNC_SECTION_ENTRY(96, __lwsync_fixup); -#else -# define LWSYNC sync -#endif - -#ifdef CONFIG_SMP -#define ISYNC_ON_SMP "\n\tisync\n" -#define LWSYNC_ON_SMP stringify_in_c(LWSYNC) "\n" -#else -#define ISYNC_ON_SMP -#define LWSYNC_ON_SMP -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_SYNCH_H */ diff --git a/include/asm-powerpc/syscall.h b/include/asm-powerpc/syscall.h deleted file mode 100644 index efa7f0b879f3..000000000000 --- a/include/asm-powerpc/syscall.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Access to user system call parameters and results - * - * Copyright (C) 2008 Red Hat, Inc. All rights reserved. - * - * This copyrighted material is made available to anyone wishing to use, - * modify, copy, or redistribute it subject to the terms and conditions - * of the GNU General Public License v.2. - * - * See asm-generic/syscall.h for descriptions of what we must do here. - */ - -#ifndef _ASM_SYSCALL_H -#define _ASM_SYSCALL_H 1 - -#include - -static inline long syscall_get_nr(struct task_struct *task, - struct pt_regs *regs) -{ - return TRAP(regs) == 0xc00 ? regs->gpr[0] : -1L; -} - -static inline void syscall_rollback(struct task_struct *task, - struct pt_regs *regs) -{ - regs->gpr[3] = regs->orig_gpr3; -} - -static inline long syscall_get_error(struct task_struct *task, - struct pt_regs *regs) -{ - return (regs->ccr & 0x1000) ? -regs->gpr[3] : 0; -} - -static inline long syscall_get_return_value(struct task_struct *task, - struct pt_regs *regs) -{ - return regs->gpr[3]; -} - -static inline void syscall_set_return_value(struct task_struct *task, - struct pt_regs *regs, - int error, long val) -{ - if (error) { - regs->ccr |= 0x1000L; - regs->gpr[3] = -error; - } else { - regs->ccr &= ~0x1000L; - regs->gpr[3] = val; - } -} - -static inline void syscall_get_arguments(struct task_struct *task, - struct pt_regs *regs, - unsigned int i, unsigned int n, - unsigned long *args) -{ - BUG_ON(i + n > 6); -#ifdef CONFIG_PPC64 - if (test_tsk_thread_flag(task, TIF_32BIT)) { - /* - * Zero-extend 32-bit argument values. The high bits are - * garbage ignored by the actual syscall dispatch. - */ - while (n-- > 0) - args[n] = (u32) regs->gpr[3 + i + n]; - return; - } -#endif - memcpy(args, ®s->gpr[3 + i], n * sizeof(args[0])); -} - -static inline void syscall_set_arguments(struct task_struct *task, - struct pt_regs *regs, - unsigned int i, unsigned int n, - const unsigned long *args) -{ - BUG_ON(i + n > 6); - memcpy(®s->gpr[3 + i], args, n * sizeof(args[0])); -} - -#endif /* _ASM_SYSCALL_H */ diff --git a/include/asm-powerpc/syscalls.h b/include/asm-powerpc/syscalls.h deleted file mode 100644 index eb8eb400c664..000000000000 --- a/include/asm-powerpc/syscalls.h +++ /dev/null @@ -1,52 +0,0 @@ -#ifndef __ASM_POWERPC_SYSCALLS_H -#define __ASM_POWERPC_SYSCALLS_H -#ifdef __KERNEL__ - -#include -#include -#include -#include - -struct new_utsname; -struct pt_regs; -struct rtas_args; -struct sigaction; - -asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len, - unsigned long prot, unsigned long flags, - unsigned long fd, off_t offset); -asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff); -asmlinkage int sys_execve(unsigned long a0, unsigned long a1, - unsigned long a2, unsigned long a3, unsigned long a4, - unsigned long a5, struct pt_regs *regs); -asmlinkage int sys_clone(unsigned long clone_flags, unsigned long usp, - int __user *parent_tidp, void __user *child_threadptr, - int __user *child_tidp, int p6, struct pt_regs *regs); -asmlinkage int sys_fork(unsigned long p1, unsigned long p2, - unsigned long p3, unsigned long p4, unsigned long p5, - unsigned long p6, struct pt_regs *regs); -asmlinkage int sys_vfork(unsigned long p1, unsigned long p2, - unsigned long p3, unsigned long p4, unsigned long p5, - unsigned long p6, struct pt_regs *regs); -asmlinkage long sys_pipe(int __user *fildes); -asmlinkage long sys_pipe2(int __user *fildes, int flags); -asmlinkage long sys_rt_sigaction(int sig, - const struct sigaction __user *act, - struct sigaction __user *oact, size_t sigsetsize); -asmlinkage int sys_ipc(uint call, int first, unsigned long second, - long third, void __user *ptr, long fifth); -asmlinkage long ppc64_personality(unsigned long personality); -asmlinkage int ppc_rtas(struct rtas_args __user *uargs); -asmlinkage time_t sys64_time(time_t __user * tloc); -asmlinkage long ppc_newuname(struct new_utsname __user * name); - -asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, - size_t sigsetsize); -asmlinkage long sys_sigaltstack(const stack_t __user *uss, - stack_t __user *uoss, unsigned long r5, unsigned long r6, - unsigned long r7, unsigned long r8, struct pt_regs *regs); - -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_SYSCALLS_H */ diff --git a/include/asm-powerpc/systbl.h b/include/asm-powerpc/systbl.h deleted file mode 100644 index e084272ed1c2..000000000000 --- a/include/asm-powerpc/systbl.h +++ /dev/null @@ -1,324 +0,0 @@ -/* - * List of powerpc syscalls. For the meaning of the _SPU suffix see - * arch/powerpc/platforms/cell/spu_callbacks.c - */ - -SYSCALL(restart_syscall) -SYSCALL(exit) -PPC_SYS(fork) -SYSCALL_SPU(read) -SYSCALL_SPU(write) -COMPAT_SYS_SPU(open) -SYSCALL_SPU(close) -COMPAT_SYS_SPU(waitpid) -COMPAT_SYS_SPU(creat) -SYSCALL_SPU(link) -SYSCALL_SPU(unlink) -COMPAT_SYS(execve) -SYSCALL_SPU(chdir) -COMPAT_SYS_SPU(time) -SYSCALL_SPU(mknod) -SYSCALL_SPU(chmod) -SYSCALL_SPU(lchown) -SYSCALL(ni_syscall) -OLDSYS(stat) -SYSX_SPU(sys_lseek,ppc32_lseek,sys_lseek) -SYSCALL_SPU(getpid) -COMPAT_SYS(mount) -SYSX(sys_ni_syscall,sys_oldumount,sys_oldumount) -SYSCALL_SPU(setuid) -SYSCALL_SPU(getuid) -COMPAT_SYS_SPU(stime) -COMPAT_SYS(ptrace) -SYSCALL_SPU(alarm) -OLDSYS(fstat) -COMPAT_SYS(pause) -COMPAT_SYS(utime) -SYSCALL(ni_syscall) -SYSCALL(ni_syscall) -COMPAT_SYS_SPU(access) -COMPAT_SYS_SPU(nice) -SYSCALL(ni_syscall) -SYSCALL_SPU(sync) -COMPAT_SYS_SPU(kill) -SYSCALL_SPU(rename) -COMPAT_SYS_SPU(mkdir) -SYSCALL_SPU(rmdir) -SYSCALL_SPU(dup) -SYSCALL_SPU(pipe) -COMPAT_SYS_SPU(times) -SYSCALL(ni_syscall) -SYSCALL_SPU(brk) -SYSCALL_SPU(setgid) -SYSCALL_SPU(getgid) -SYSCALL(signal) -SYSCALL_SPU(geteuid) -SYSCALL_SPU(getegid) -SYSCALL(acct) -SYSCALL(umount) -SYSCALL(ni_syscall) -COMPAT_SYS_SPU(ioctl) -COMPAT_SYS_SPU(fcntl) -SYSCALL(ni_syscall) -COMPAT_SYS_SPU(setpgid) -SYSCALL(ni_syscall) -SYSX(sys_ni_syscall,sys_olduname, sys_olduname) -COMPAT_SYS_SPU(umask) -SYSCALL_SPU(chroot) -SYSCALL(ustat) -SYSCALL_SPU(dup2) -SYSCALL_SPU(getppid) -SYSCALL_SPU(getpgrp) -SYSCALL_SPU(setsid) -SYS32ONLY(sigaction) -SYSCALL_SPU(sgetmask) -COMPAT_SYS_SPU(ssetmask) -SYSCALL_SPU(setreuid) -SYSCALL_SPU(setregid) -SYS32ONLY(sigsuspend) -COMPAT_SYS(sigpending) -COMPAT_SYS_SPU(sethostname) -COMPAT_SYS_SPU(setrlimit) -COMPAT_SYS(old_getrlimit) -COMPAT_SYS_SPU(getrusage) -COMPAT_SYS_SPU(gettimeofday) -COMPAT_SYS_SPU(settimeofday) -COMPAT_SYS_SPU(getgroups) -COMPAT_SYS_SPU(setgroups) -SYSX(sys_ni_syscall,sys_ni_syscall,ppc_select) -SYSCALL_SPU(symlink) -OLDSYS(lstat) -COMPAT_SYS_SPU(readlink) -SYSCALL(uselib) -SYSCALL(swapon) -SYSCALL(reboot) -SYSX(sys_ni_syscall,old32_readdir,old_readdir) -SYSCALL_SPU(mmap) -SYSCALL_SPU(munmap) -SYSCALL_SPU(truncate) -SYSCALL_SPU(ftruncate) -SYSCALL_SPU(fchmod) -SYSCALL_SPU(fchown) -COMPAT_SYS_SPU(getpriority) -COMPAT_SYS_SPU(setpriority) -SYSCALL(ni_syscall) -COMPAT_SYS(statfs) -COMPAT_SYS(fstatfs) -SYSCALL(ni_syscall) -COMPAT_SYS_SPU(socketcall) -COMPAT_SYS_SPU(syslog) -COMPAT_SYS_SPU(setitimer) -COMPAT_SYS_SPU(getitimer) -COMPAT_SYS_SPU(newstat) -COMPAT_SYS_SPU(newlstat) -COMPAT_SYS_SPU(newfstat) -SYSX(sys_ni_syscall,sys_uname,sys_uname) -SYSCALL(ni_syscall) -SYSCALL_SPU(vhangup) -SYSCALL(ni_syscall) -SYSCALL(ni_syscall) -COMPAT_SYS_SPU(wait4) -SYSCALL(swapoff) -COMPAT_SYS_SPU(sysinfo) -COMPAT_SYS(ipc) -SYSCALL_SPU(fsync) -SYS32ONLY(sigreturn) -PPC_SYS(clone) -COMPAT_SYS_SPU(setdomainname) -PPC_SYS_SPU(newuname) -SYSCALL(ni_syscall) -COMPAT_SYS_SPU(adjtimex) -SYSCALL_SPU(mprotect) -SYSX(sys_ni_syscall,compat_sys_sigprocmask,sys_sigprocmask) -SYSCALL(ni_syscall) -SYSCALL(init_module) -SYSCALL(delete_module) -SYSCALL(ni_syscall) -SYSCALL(quotactl) -COMPAT_SYS_SPU(getpgid) -SYSCALL_SPU(fchdir) -SYSCALL_SPU(bdflush) -COMPAT_SYS(sysfs) -SYSX_SPU(ppc64_personality,ppc64_personality,sys_personality) -SYSCALL(ni_syscall) -SYSCALL_SPU(setfsuid) -SYSCALL_SPU(setfsgid) -SYSCALL_SPU(llseek) -COMPAT_SYS_SPU(getdents) -SYSX_SPU(sys_select,ppc32_select,ppc_select) -SYSCALL_SPU(flock) -SYSCALL_SPU(msync) -COMPAT_SYS_SPU(readv) -COMPAT_SYS_SPU(writev) -COMPAT_SYS_SPU(getsid) -SYSCALL_SPU(fdatasync) -COMPAT_SYS(sysctl) -SYSCALL_SPU(mlock) -SYSCALL_SPU(munlock) -SYSCALL_SPU(mlockall) -SYSCALL_SPU(munlockall) -COMPAT_SYS_SPU(sched_setparam) -COMPAT_SYS_SPU(sched_getparam) -COMPAT_SYS_SPU(sched_setscheduler) -COMPAT_SYS_SPU(sched_getscheduler) -SYSCALL_SPU(sched_yield) -COMPAT_SYS_SPU(sched_get_priority_max) -COMPAT_SYS_SPU(sched_get_priority_min) -COMPAT_SYS_SPU(sched_rr_get_interval) -COMPAT_SYS_SPU(nanosleep) -SYSCALL_SPU(mremap) -SYSCALL_SPU(setresuid) -SYSCALL_SPU(getresuid) -SYSCALL(ni_syscall) -SYSCALL_SPU(poll) -COMPAT_SYS(nfsservctl) -SYSCALL_SPU(setresgid) -SYSCALL_SPU(getresgid) -COMPAT_SYS_SPU(prctl) -COMPAT_SYS(rt_sigreturn) -COMPAT_SYS(rt_sigaction) -COMPAT_SYS(rt_sigprocmask) -COMPAT_SYS(rt_sigpending) -COMPAT_SYS(rt_sigtimedwait) -COMPAT_SYS(rt_sigqueueinfo) -COMPAT_SYS(rt_sigsuspend) -COMPAT_SYS_SPU(pread64) -COMPAT_SYS_SPU(pwrite64) -SYSCALL_SPU(chown) -SYSCALL_SPU(getcwd) -SYSCALL_SPU(capget) -SYSCALL_SPU(capset) -COMPAT_SYS(sigaltstack) -SYSX_SPU(sys_sendfile64,compat_sys_sendfile,sys_sendfile) -SYSCALL(ni_syscall) -SYSCALL(ni_syscall) -PPC_SYS(vfork) -COMPAT_SYS_SPU(getrlimit) -COMPAT_SYS_SPU(readahead) -SYS32ONLY(mmap2) -SYS32ONLY(truncate64) -SYS32ONLY(ftruncate64) -SYSX(sys_ni_syscall,sys_stat64,sys_stat64) -SYSX(sys_ni_syscall,sys_lstat64,sys_lstat64) -SYSX(sys_ni_syscall,sys_fstat64,sys_fstat64) -SYSCALL(pciconfig_read) -SYSCALL(pciconfig_write) -SYSCALL(pciconfig_iobase) -SYSCALL(ni_syscall) -SYSCALL_SPU(getdents64) -SYSCALL_SPU(pivot_root) -SYSX(sys_ni_syscall,compat_sys_fcntl64,sys_fcntl64) -SYSCALL_SPU(madvise) -SYSCALL_SPU(mincore) -SYSCALL_SPU(gettid) -SYSCALL_SPU(tkill) -SYSCALL_SPU(setxattr) -SYSCALL_SPU(lsetxattr) -SYSCALL_SPU(fsetxattr) -SYSCALL_SPU(getxattr) -SYSCALL_SPU(lgetxattr) -SYSCALL_SPU(fgetxattr) -SYSCALL_SPU(listxattr) -SYSCALL_SPU(llistxattr) -SYSCALL_SPU(flistxattr) -SYSCALL_SPU(removexattr) -SYSCALL_SPU(lremovexattr) -SYSCALL_SPU(fremovexattr) -COMPAT_SYS_SPU(futex) -COMPAT_SYS_SPU(sched_setaffinity) -COMPAT_SYS_SPU(sched_getaffinity) -SYSCALL(ni_syscall) -SYSCALL(ni_syscall) -SYS32ONLY(sendfile64) -COMPAT_SYS_SPU(io_setup) -SYSCALL_SPU(io_destroy) -COMPAT_SYS_SPU(io_getevents) -COMPAT_SYS_SPU(io_submit) -SYSCALL_SPU(io_cancel) -SYSCALL(set_tid_address) -SYSX_SPU(sys_fadvise64,ppc32_fadvise64,sys_fadvise64) -SYSCALL(exit_group) -SYSX(sys_lookup_dcookie,ppc32_lookup_dcookie,sys_lookup_dcookie) -SYSCALL_SPU(epoll_create) -SYSCALL_SPU(epoll_ctl) -SYSCALL_SPU(epoll_wait) -SYSCALL_SPU(remap_file_pages) -SYSX_SPU(sys_timer_create,compat_sys_timer_create,sys_timer_create) -COMPAT_SYS_SPU(timer_settime) -COMPAT_SYS_SPU(timer_gettime) -SYSCALL_SPU(timer_getoverrun) -SYSCALL_SPU(timer_delete) -COMPAT_SYS_SPU(clock_settime) -COMPAT_SYS_SPU(clock_gettime) -COMPAT_SYS_SPU(clock_getres) -COMPAT_SYS_SPU(clock_nanosleep) -SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext) -COMPAT_SYS_SPU(tgkill) -COMPAT_SYS_SPU(utimes) -COMPAT_SYS_SPU(statfs64) -COMPAT_SYS_SPU(fstatfs64) -SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64) -PPC_SYS_SPU(rtas) -OLDSYS(debug_setcontext) -SYSCALL(ni_syscall) -COMPAT_SYS(migrate_pages) -COMPAT_SYS(mbind) -COMPAT_SYS(get_mempolicy) -COMPAT_SYS(set_mempolicy) -COMPAT_SYS(mq_open) -SYSCALL(mq_unlink) -COMPAT_SYS(mq_timedsend) -COMPAT_SYS(mq_timedreceive) -COMPAT_SYS(mq_notify) -COMPAT_SYS(mq_getsetattr) -COMPAT_SYS(kexec_load) -COMPAT_SYS(add_key) -COMPAT_SYS(request_key) -COMPAT_SYS(keyctl) -COMPAT_SYS(waitid) -COMPAT_SYS(ioprio_set) -COMPAT_SYS(ioprio_get) -SYSCALL(inotify_init) -SYSCALL(inotify_add_watch) -SYSCALL(inotify_rm_watch) -SYSCALL(spu_run) -SYSCALL(spu_create) -COMPAT_SYS(pselect6) -COMPAT_SYS(ppoll) -SYSCALL_SPU(unshare) -SYSCALL_SPU(splice) -SYSCALL_SPU(tee) -COMPAT_SYS_SPU(vmsplice) -COMPAT_SYS_SPU(openat) -SYSCALL_SPU(mkdirat) -SYSCALL_SPU(mknodat) -SYSCALL_SPU(fchownat) -COMPAT_SYS_SPU(futimesat) -SYSX_SPU(sys_newfstatat, sys_fstatat64, sys_fstatat64) -SYSCALL_SPU(unlinkat) -SYSCALL_SPU(renameat) -SYSCALL_SPU(linkat) -SYSCALL_SPU(symlinkat) -SYSCALL_SPU(readlinkat) -SYSCALL_SPU(fchmodat) -SYSCALL_SPU(faccessat) -COMPAT_SYS_SPU(get_robust_list) -COMPAT_SYS_SPU(set_robust_list) -COMPAT_SYS_SPU(move_pages) -SYSCALL_SPU(getcpu) -COMPAT_SYS(epoll_pwait) -COMPAT_SYS_SPU(utimensat) -COMPAT_SYS_SPU(signalfd) -SYSCALL_SPU(timerfd_create) -SYSCALL_SPU(eventfd) -COMPAT_SYS_SPU(sync_file_range2) -COMPAT_SYS(fallocate) -SYSCALL(subpage_prot) -COMPAT_SYS_SPU(timerfd_settime) -COMPAT_SYS_SPU(timerfd_gettime) -COMPAT_SYS_SPU(signalfd4) -SYSCALL_SPU(eventfd2) -SYSCALL_SPU(epoll_create1) -SYSCALL_SPU(dup3) -SYSCALL_SPU(pipe2) -SYSCALL(inotify_init1) diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h deleted file mode 100644 index d6648c143322..000000000000 --- a/include/asm-powerpc/system.h +++ /dev/null @@ -1,548 +0,0 @@ -/* - * Copyright (C) 1999 Cort Dougan - */ -#ifndef _ASM_POWERPC_SYSTEM_H -#define _ASM_POWERPC_SYSTEM_H - -#include -#include - -#include - -/* - * Memory barrier. - * The sync instruction guarantees that all memory accesses initiated - * by this processor have been performed (with respect to all other - * mechanisms that access memory). The eieio instruction is a barrier - * providing an ordering (separately) for (a) cacheable stores and (b) - * loads and stores to non-cacheable memory (e.g. I/O devices). - * - * mb() prevents loads and stores being reordered across this point. - * rmb() prevents loads being reordered across this point. - * wmb() prevents stores being reordered across this point. - * read_barrier_depends() prevents data-dependent loads being reordered - * across this point (nop on PPC). - * - * We have to use the sync instructions for mb(), since lwsync doesn't - * order loads with respect to previous stores. Lwsync is fine for - * rmb(), though. Note that rmb() actually uses a sync on 32-bit - * architectures. - * - * For wmb(), we use sync since wmb is used in drivers to order - * stores to system memory with respect to writes to the device. - * However, smp_wmb() can be a lighter-weight lwsync or eieio barrier - * on SMP since it is only used to order updates to system memory. - */ -#define mb() __asm__ __volatile__ ("sync" : : : "memory") -#define rmb() __asm__ __volatile__ ("sync" : : : "memory") -#define wmb() __asm__ __volatile__ ("sync" : : : "memory") -#define read_barrier_depends() do { } while(0) - -#define set_mb(var, value) do { var = value; mb(); } while (0) - -#ifdef __KERNEL__ -#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */ -#ifdef CONFIG_SMP - -#ifdef __SUBARCH_HAS_LWSYNC -# define SMPWMB lwsync -#else -# define SMPWMB eieio -#endif - -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() __asm__ __volatile__ (__stringify(SMPWMB) : : :"memory") -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) -#endif /* CONFIG_SMP */ - -/* - * This is a barrier which prevents following instructions from being - * started until the value of the argument x is known. For example, if - * x is a variable loaded from memory, this prevents following - * instructions from being executed until the load has been performed. - */ -#define data_barrier(x) \ - asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory"); - -struct task_struct; -struct pt_regs; - -#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) - -extern int (*__debugger)(struct pt_regs *regs); -extern int (*__debugger_ipi)(struct pt_regs *regs); -extern int (*__debugger_bpt)(struct pt_regs *regs); -extern int (*__debugger_sstep)(struct pt_regs *regs); -extern int (*__debugger_iabr_match)(struct pt_regs *regs); -extern int (*__debugger_dabr_match)(struct pt_regs *regs); -extern int (*__debugger_fault_handler)(struct pt_regs *regs); - -#define DEBUGGER_BOILERPLATE(__NAME) \ -static inline int __NAME(struct pt_regs *regs) \ -{ \ - if (unlikely(__ ## __NAME)) \ - return __ ## __NAME(regs); \ - return 0; \ -} - -DEBUGGER_BOILERPLATE(debugger) -DEBUGGER_BOILERPLATE(debugger_ipi) -DEBUGGER_BOILERPLATE(debugger_bpt) -DEBUGGER_BOILERPLATE(debugger_sstep) -DEBUGGER_BOILERPLATE(debugger_iabr_match) -DEBUGGER_BOILERPLATE(debugger_dabr_match) -DEBUGGER_BOILERPLATE(debugger_fault_handler) - -#else -static inline int debugger(struct pt_regs *regs) { return 0; } -static inline int debugger_ipi(struct pt_regs *regs) { return 0; } -static inline int debugger_bpt(struct pt_regs *regs) { return 0; } -static inline int debugger_sstep(struct pt_regs *regs) { return 0; } -static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; } -static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; } -static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; } -#endif - -extern int set_dabr(unsigned long dabr); -extern void do_dabr(struct pt_regs *regs, unsigned long address, - unsigned long error_code); -extern void print_backtrace(unsigned long *); -extern void show_regs(struct pt_regs * regs); -extern void flush_instruction_cache(void); -extern void hard_reset_now(void); -extern void poweroff_now(void); - -#ifdef CONFIG_6xx -extern long _get_L2CR(void); -extern long _get_L3CR(void); -extern void _set_L2CR(unsigned long); -extern void _set_L3CR(unsigned long); -#else -#define _get_L2CR() 0L -#define _get_L3CR() 0L -#define _set_L2CR(val) do { } while(0) -#define _set_L3CR(val) do { } while(0) -#endif - -extern void via_cuda_init(void); -extern void read_rtc_time(void); -extern void pmac_find_display(void); -extern void giveup_fpu(struct task_struct *); -extern void disable_kernel_fp(void); -extern void enable_kernel_fp(void); -extern void flush_fp_to_thread(struct task_struct *); -extern void enable_kernel_altivec(void); -extern void giveup_altivec(struct task_struct *); -extern void load_up_altivec(struct task_struct *); -extern int emulate_altivec(struct pt_regs *); -extern void __giveup_vsx(struct task_struct *); -extern void giveup_vsx(struct task_struct *); -extern void enable_kernel_spe(void); -extern void giveup_spe(struct task_struct *); -extern void load_up_spe(struct task_struct *); -extern int fix_alignment(struct pt_regs *); -extern void cvt_fd(float *from, double *to, struct thread_struct *thread); -extern void cvt_df(double *from, float *to, struct thread_struct *thread); - -#ifndef CONFIG_SMP -extern void discard_lazy_cpu_state(void); -#else -static inline void discard_lazy_cpu_state(void) -{ -} -#endif - -#ifdef CONFIG_ALTIVEC -extern void flush_altivec_to_thread(struct task_struct *); -#else -static inline void flush_altivec_to_thread(struct task_struct *t) -{ -} -#endif - -#ifdef CONFIG_VSX -extern void flush_vsx_to_thread(struct task_struct *); -#else -static inline void flush_vsx_to_thread(struct task_struct *t) -{ -} -#endif - -#ifdef CONFIG_SPE -extern void flush_spe_to_thread(struct task_struct *); -#else -static inline void flush_spe_to_thread(struct task_struct *t) -{ -} -#endif - -extern int call_rtas(const char *, int, int, unsigned long *, ...); -extern void cacheable_memzero(void *p, unsigned int nb); -extern void *cacheable_memcpy(void *, const void *, unsigned int); -extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long); -extern void bad_page_fault(struct pt_regs *, unsigned long, int); -extern int die(const char *, struct pt_regs *, long); -extern void _exception(int, struct pt_regs *, int, unsigned long); -extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); - -#ifdef CONFIG_BOOKE_WDT -extern u32 booke_wdt_enabled; -extern u32 booke_wdt_period; -#endif /* CONFIG_BOOKE_WDT */ - -struct device_node; -extern void note_scsi_host(struct device_node *, void *); - -extern struct task_struct *__switch_to(struct task_struct *, - struct task_struct *); -#define switch_to(prev, next, last) ((last) = __switch_to((prev), (next))) - -struct thread_struct; -extern struct task_struct *_switch(struct thread_struct *prev, - struct thread_struct *next); - -extern unsigned int rtas_data; -extern int mem_init_done; /* set on boot once kmalloc can be called */ -extern int init_bootmem_done; /* set on !NUMA once bootmem is available */ -extern unsigned long memory_limit; -extern unsigned long klimit; - -extern void *alloc_maybe_bootmem(size_t size, gfp_t mask); -extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask); - -extern int powersave_nap; /* set if nap mode can be used in idle loop */ - -/* - * Atomic exchange - * - * Changes the memory location '*ptr' to be val and returns - * the previous value stored there. - */ -static __always_inline unsigned long -__xchg_u32(volatile void *p, unsigned long val) -{ - unsigned long prev; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: lwarx %0,0,%2 \n" - PPC405_ERR77(0,%2) -" stwcx. %3,0,%2 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (prev), "+m" (*(volatile unsigned int *)p) - : "r" (p), "r" (val) - : "cc", "memory"); - - return prev; -} - -/* - * Atomic exchange - * - * Changes the memory location '*ptr' to be val and returns - * the previous value stored there. - */ -static __always_inline unsigned long -__xchg_u32_local(volatile void *p, unsigned long val) -{ - unsigned long prev; - - __asm__ __volatile__( -"1: lwarx %0,0,%2 \n" - PPC405_ERR77(0,%2) -" stwcx. %3,0,%2 \n\ - bne- 1b" - : "=&r" (prev), "+m" (*(volatile unsigned int *)p) - : "r" (p), "r" (val) - : "cc", "memory"); - - return prev; -} - -#ifdef CONFIG_PPC64 -static __always_inline unsigned long -__xchg_u64(volatile void *p, unsigned long val) -{ - unsigned long prev; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: ldarx %0,0,%2 \n" - PPC405_ERR77(0,%2) -" stdcx. %3,0,%2 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (prev), "+m" (*(volatile unsigned long *)p) - : "r" (p), "r" (val) - : "cc", "memory"); - - return prev; -} - -static __always_inline unsigned long -__xchg_u64_local(volatile void *p, unsigned long val) -{ - unsigned long prev; - - __asm__ __volatile__( -"1: ldarx %0,0,%2 \n" - PPC405_ERR77(0,%2) -" stdcx. %3,0,%2 \n\ - bne- 1b" - : "=&r" (prev), "+m" (*(volatile unsigned long *)p) - : "r" (p), "r" (val) - : "cc", "memory"); - - return prev; -} -#endif - -/* - * This function doesn't exist, so you'll get a linker error - * if something tries to do an invalid xchg(). - */ -extern void __xchg_called_with_bad_pointer(void); - -static __always_inline unsigned long -__xchg(volatile void *ptr, unsigned long x, unsigned int size) -{ - switch (size) { - case 4: - return __xchg_u32(ptr, x); -#ifdef CONFIG_PPC64 - case 8: - return __xchg_u64(ptr, x); -#endif - } - __xchg_called_with_bad_pointer(); - return x; -} - -static __always_inline unsigned long -__xchg_local(volatile void *ptr, unsigned long x, unsigned int size) -{ - switch (size) { - case 4: - return __xchg_u32_local(ptr, x); -#ifdef CONFIG_PPC64 - case 8: - return __xchg_u64_local(ptr, x); -#endif - } - __xchg_called_with_bad_pointer(); - return x; -} -#define xchg(ptr,x) \ - ({ \ - __typeof__(*(ptr)) _x_ = (x); \ - (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \ - }) - -#define xchg_local(ptr,x) \ - ({ \ - __typeof__(*(ptr)) _x_ = (x); \ - (__typeof__(*(ptr))) __xchg_local((ptr), \ - (unsigned long)_x_, sizeof(*(ptr))); \ - }) - -/* - * Compare and exchange - if *p == old, set it to new, - * and return the old value of *p. - */ -#define __HAVE_ARCH_CMPXCHG 1 - -static __always_inline unsigned long -__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new) -{ - unsigned int prev; - - __asm__ __volatile__ ( - LWSYNC_ON_SMP -"1: lwarx %0,0,%2 # __cmpxchg_u32\n\ - cmpw 0,%0,%3\n\ - bne- 2f\n" - PPC405_ERR77(0,%2) -" stwcx. %4,0,%2\n\ - bne- 1b" - ISYNC_ON_SMP - "\n\ -2:" - : "=&r" (prev), "+m" (*p) - : "r" (p), "r" (old), "r" (new) - : "cc", "memory"); - - return prev; -} - -static __always_inline unsigned long -__cmpxchg_u32_local(volatile unsigned int *p, unsigned long old, - unsigned long new) -{ - unsigned int prev; - - __asm__ __volatile__ ( -"1: lwarx %0,0,%2 # __cmpxchg_u32\n\ - cmpw 0,%0,%3\n\ - bne- 2f\n" - PPC405_ERR77(0,%2) -" stwcx. %4,0,%2\n\ - bne- 1b" - "\n\ -2:" - : "=&r" (prev), "+m" (*p) - : "r" (p), "r" (old), "r" (new) - : "cc", "memory"); - - return prev; -} - -#ifdef CONFIG_PPC64 -static __always_inline unsigned long -__cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new) -{ - unsigned long prev; - - __asm__ __volatile__ ( - LWSYNC_ON_SMP -"1: ldarx %0,0,%2 # __cmpxchg_u64\n\ - cmpd 0,%0,%3\n\ - bne- 2f\n\ - stdcx. %4,0,%2\n\ - bne- 1b" - ISYNC_ON_SMP - "\n\ -2:" - : "=&r" (prev), "+m" (*p) - : "r" (p), "r" (old), "r" (new) - : "cc", "memory"); - - return prev; -} - -static __always_inline unsigned long -__cmpxchg_u64_local(volatile unsigned long *p, unsigned long old, - unsigned long new) -{ - unsigned long prev; - - __asm__ __volatile__ ( -"1: ldarx %0,0,%2 # __cmpxchg_u64\n\ - cmpd 0,%0,%3\n\ - bne- 2f\n\ - stdcx. %4,0,%2\n\ - bne- 1b" - "\n\ -2:" - : "=&r" (prev), "+m" (*p) - : "r" (p), "r" (old), "r" (new) - : "cc", "memory"); - - return prev; -} -#endif - -/* This function doesn't exist, so you'll get a linker error - if something tries to do an invalid cmpxchg(). */ -extern void __cmpxchg_called_with_bad_pointer(void); - -static __always_inline unsigned long -__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, - unsigned int size) -{ - switch (size) { - case 4: - return __cmpxchg_u32(ptr, old, new); -#ifdef CONFIG_PPC64 - case 8: - return __cmpxchg_u64(ptr, old, new); -#endif - } - __cmpxchg_called_with_bad_pointer(); - return old; -} - -static __always_inline unsigned long -__cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new, - unsigned int size) -{ - switch (size) { - case 4: - return __cmpxchg_u32_local(ptr, old, new); -#ifdef CONFIG_PPC64 - case 8: - return __cmpxchg_u64_local(ptr, old, new); -#endif - } - __cmpxchg_called_with_bad_pointer(); - return old; -} - -#define cmpxchg(ptr, o, n) \ - ({ \ - __typeof__(*(ptr)) _o_ = (o); \ - __typeof__(*(ptr)) _n_ = (n); \ - (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ - (unsigned long)_n_, sizeof(*(ptr))); \ - }) - - -#define cmpxchg_local(ptr, o, n) \ - ({ \ - __typeof__(*(ptr)) _o_ = (o); \ - __typeof__(*(ptr)) _n_ = (n); \ - (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \ - (unsigned long)_n_, sizeof(*(ptr))); \ - }) - -#ifdef CONFIG_PPC64 -/* - * We handle most unaligned accesses in hardware. On the other hand - * unaligned DMA can be very expensive on some ppc64 IO chips (it does - * powers of 2 writes until it reaches sufficient alignment). - * - * Based on this we disable the IP header alignment in network drivers. - * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining - * cacheline alignment of buffers. - */ -#define NET_IP_ALIGN 0 -#define NET_SKB_PAD L1_CACHE_BYTES - -#define cmpxchg64(ptr, o, n) \ - ({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ - cmpxchg((ptr), (o), (n)); \ - }) -#define cmpxchg64_local(ptr, o, n) \ - ({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ - cmpxchg_local((ptr), (o), (n)); \ - }) -#else -#include -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) -#endif - -#define arch_align_stack(x) (x) - -/* Used in very early kernel initialization. */ -extern unsigned long reloc_offset(void); -extern unsigned long add_reloc_offset(unsigned long); -extern void reloc_got2(unsigned long); - -#define PTRRELOC(x) ((typeof(x)) add_reloc_offset((unsigned long)(x))) - -#ifdef CONFIG_VIRT_CPU_ACCOUNTING -extern void account_system_vtime(struct task_struct *); -#endif - -extern struct dentry *powerpc_debugfs_root; - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_SYSTEM_H */ diff --git a/include/asm-powerpc/tce.h b/include/asm-powerpc/tce.h deleted file mode 100644 index f663634cccc9..000000000000 --- a/include/asm-powerpc/tce.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation - * Rewrite, cleanup: - * Copyright (C) 2004 Olof Johansson , IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ASM_POWERPC_TCE_H -#define _ASM_POWERPC_TCE_H -#ifdef __KERNEL__ - -#include - -/* - * Tces come in two formats, one for the virtual bus and a different - * format for PCI - */ -#define TCE_VB 0 -#define TCE_PCI 1 - -/* TCE page size is 4096 bytes (1 << 12) */ - -#define TCE_SHIFT 12 -#define TCE_PAGE_SIZE (1 << TCE_SHIFT) - -#define TCE_ENTRY_SIZE 8 /* each TCE is 64 bits */ - -#define TCE_RPN_MASK 0xfffffffffful /* 40-bit RPN (4K pages) */ -#define TCE_RPN_SHIFT 12 -#define TCE_VALID 0x800 /* TCE valid */ -#define TCE_ALLIO 0x400 /* TCE valid for all lpars */ -#define TCE_PCI_WRITE 0x2 /* write from PCI allowed */ -#define TCE_PCI_READ 0x1 /* read from PCI allowed */ -#define TCE_VB_WRITE 0x1 /* write from VB allowed */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_TCE_H */ diff --git a/include/asm-powerpc/termbits.h b/include/asm-powerpc/termbits.h deleted file mode 100644 index 6698188ca550..000000000000 --- a/include/asm-powerpc/termbits.h +++ /dev/null @@ -1,209 +0,0 @@ -#ifndef _ASM_POWERPC_TERMBITS_H -#define _ASM_POWERPC_TERMBITS_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -/* - * termios type and macro definitions. Be careful about adding stuff - * to this file since it's used in GNU libc and there are strict rules - * concerning namespace pollution. - */ - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_cc[NCCS]; /* control characters */ - cc_t c_line; /* line discipline (== c_cc[19]) */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* For PowerPC the termios and ktermios are the same */ - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_cc[NCCS]; /* control characters */ - cc_t c_line; /* line discipline (== c_cc[19]) */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VMIN 5 -#define VEOL 6 -#define VTIME 7 -#define VEOL2 8 -#define VSWTC 9 -#define VWERASE 10 -#define VREPRINT 11 -#define VSUSP 12 -#define VSTART 13 -#define VSTOP 14 -#define VLNEXT 15 -#define VDISCARD 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IXON 0001000 -#define IXOFF 0002000 -#define IXANY 0004000 -#define IUCLC 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define ONLCR 0000002 -#define OLCUC 0000004 - -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 - -#define OFILL 00000100 -#define OFDEL 00000200 -#define NLDLY 00001400 -#define NL0 00000000 -#define NL1 00000400 -#define NL2 00001000 -#define NL3 00001400 -#define TABDLY 00006000 -#define TAB0 00000000 -#define TAB1 00002000 -#define TAB2 00004000 -#define TAB3 00006000 -#define XTABS 00006000 /* required by POSIX to == TAB3 */ -#define CRDLY 00030000 -#define CR0 00000000 -#define CR1 00010000 -#define CR2 00020000 -#define CR3 00030000 -#define FFDLY 00040000 -#define FF0 00000000 -#define FF1 00040000 -#define BSDLY 00100000 -#define BS0 00000000 -#define BS1 00100000 -#define VTDLY 00200000 -#define VT0 00000000 -#define VT1 00200000 - -/* c_cflag bit meaning */ -#define CBAUD 0000377 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CBAUDEX 0000000 -#define B57600 00020 -#define B115200 00021 -#define B230400 00022 -#define B460800 00023 -#define B500000 00024 -#define B576000 00025 -#define B921600 00026 -#define B1000000 00027 -#define B1152000 00030 -#define B1500000 00031 -#define B2000000 00032 -#define B2500000 00033 -#define B3000000 00034 -#define B3500000 00035 -#define B4000000 00036 -#define BOTHER 00037 - -#define CIBAUD 077600000 -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -#define CSIZE 00001400 -#define CS5 00000000 -#define CS6 00000400 -#define CS7 00001000 -#define CS8 00001400 - -#define CSTOPB 00002000 -#define CREAD 00004000 -#define PARENB 00010000 -#define PARODD 00020000 -#define HUPCL 00040000 - -#define CLOCAL 00100000 -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -/* c_lflag bits */ -#define ISIG 0x00000080 -#define ICANON 0x00000100 -#define XCASE 0x00004000 -#define ECHO 0x00000008 -#define ECHOE 0x00000002 -#define ECHOK 0x00000004 -#define ECHONL 0x00000010 -#define NOFLSH 0x80000000 -#define TOSTOP 0x00400000 -#define ECHOCTL 0x00000040 -#define ECHOPRT 0x00000020 -#define ECHOKE 0x00000001 -#define FLUSHO 0x00800000 -#define PENDIN 0x20000000 -#define IEXTEN 0x00000400 - -/* Values for the ACTION argument to `tcflow'. */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* Values for the QUEUE_SELECTOR argument to `tcflush'. */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'. */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _ASM_POWERPC_TERMBITS_H */ diff --git a/include/asm-powerpc/termios.h b/include/asm-powerpc/termios.h deleted file mode 100644 index 2c14fea07c8a..000000000000 --- a/include/asm-powerpc/termios.h +++ /dev/null @@ -1,85 +0,0 @@ -#ifndef _ASM_POWERPC_TERMIOS_H -#define _ASM_POWERPC_TERMIOS_H - -/* - * Liberally adapted from alpha/termios.h. In particular, the c_cc[] - * fields have been reordered so that termio & termios share the - * common subset in the same order (for brain dead programs that don't - * know or care about the differences). - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include - -struct sgttyb { - char sg_ispeed; - char sg_ospeed; - char sg_erase; - char sg_kill; - short sg_flags; -}; - -struct tchars { - char t_intrc; - char t_quitc; - char t_startc; - char t_stopc; - char t_eofc; - char t_brkc; -}; - -struct ltchars { - char t_suspc; - char t_dsuspc; - char t_rprntc; - char t_flushc; - char t_werasc; - char t_lnextc; -}; - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 10 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* c_cc characters */ -#define _VINTR 0 -#define _VQUIT 1 -#define _VERASE 2 -#define _VKILL 3 -#define _VEOF 4 -#define _VMIN 5 -#define _VEOL 6 -#define _VTIME 7 -#define _VEOL2 8 -#define _VSWTC 9 - -#ifdef __KERNEL__ -/* ^C ^\ del ^U ^D 1 0 0 0 0 ^W ^R ^Z ^Q ^S ^V ^U */ -#define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025" -#endif - -#ifdef __KERNEL__ - -#include - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_TERMIOS_H */ diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h deleted file mode 100644 index 9665a26a253a..000000000000 --- a/include/asm-powerpc/thread_info.h +++ /dev/null @@ -1,161 +0,0 @@ -/* thread_info.h: PowerPC low-level thread information - * adapted from the i386 version by Paul Mackerras - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ - -#ifndef _ASM_POWERPC_THREAD_INFO_H -#define _ASM_POWERPC_THREAD_INFO_H - -#ifdef __KERNEL__ - -/* We have 8k stacks on ppc32 and 16k on ppc64 */ - -#ifdef CONFIG_PPC64 -#define THREAD_SHIFT 14 -#else -#define THREAD_SHIFT 13 -#endif - -#define THREAD_SIZE (1 << THREAD_SHIFT) - -#ifndef __ASSEMBLY__ -#include -#include -#include -#include - -/* - * low level task data. - */ -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - int cpu; /* cpu we're on */ - int preempt_count; /* 0 => preemptable, - <0 => BUG */ - struct restart_block restart_block; - unsigned long local_flags; /* private flags for thread */ - - /* low level flags - has atomic operations done on it */ - unsigned long flags ____cacheline_aligned_in_smp; -}; - -/* - * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .cpu = 0, \ - .preempt_count = 1, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ - .flags = 0, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -/* thread information allocation */ - -#if THREAD_SHIFT >= PAGE_SHIFT - -#define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT) - -#else /* THREAD_SHIFT < PAGE_SHIFT */ - -#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR - -extern struct thread_info *alloc_thread_info(struct task_struct *tsk); -extern void free_thread_info(struct thread_info *ti); - -#endif /* THREAD_SHIFT < PAGE_SHIFT */ - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - register unsigned long sp asm("r1"); - - /* gcc4, at least, is smart enough to turn this into a single - * rlwinm for ppc32 and clrrdi for ppc64 */ - return (struct thread_info *)(sp & ~(THREAD_SIZE-1)); -} - -#endif /* __ASSEMBLY__ */ - -#define PREEMPT_ACTIVE 0x10000000 - -/* - * thread information flag bit numbers - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling - TIF_NEED_RESCHED */ -#define TIF_32BIT 4 /* 32 bit binary */ -#define TIF_PERFMON_WORK 5 /* work for pfm_handle_work() */ -#define TIF_PERFMON_CTXSW 6 /* perfmon needs ctxsw calls */ -#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ -#define TIF_SINGLESTEP 8 /* singlestepping active */ -#define TIF_MEMDIE 9 -#define TIF_SECCOMP 10 /* secure computing */ -#define TIF_RESTOREALL 11 /* Restore all regs (implies NOERROR) */ -#define TIF_NOERROR 12 /* Force successful syscall return */ -#define TIF_NOTIFY_RESUME 13 /* callback before returning to user */ -#define TIF_FREEZE 14 /* Freezing for suspend */ -#define TIF_RUNLATCH 15 /* Is the runlatch enabled? */ -#define TIF_ABI_PENDING 16 /* 32/64 bit switch needed */ - -/* as above, but as bit values */ -#define _TIF_SYSCALL_TRACE (1<local_flags |= _TLF_RESTORE_SIGMASK; - set_bit(TIF_SIGPENDING, &ti->flags); -} -#endif /* !__ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_THREAD_INFO_H */ diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h deleted file mode 100644 index febd581ec9b0..000000000000 --- a/include/asm-powerpc/time.h +++ /dev/null @@ -1,255 +0,0 @@ -/* - * Common time prototypes and such for all ppc machines. - * - * Written by Cort Dougan (cort@cs.nmt.edu) to merge - * Paul Mackerras' version and mine for PReP and Pmac. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __POWERPC_TIME_H -#define __POWERPC_TIME_H - -#ifdef __KERNEL__ -#include -#include - -#include -#ifdef CONFIG_PPC_ISERIES -#include -#include -#include -#endif - -/* time.c */ -extern unsigned long tb_ticks_per_jiffy; -extern unsigned long tb_ticks_per_usec; -extern unsigned long tb_ticks_per_sec; -extern u64 tb_to_xs; -extern unsigned tb_to_us; - -struct rtc_time; -extern void to_tm(int tim, struct rtc_time * tm); -extern void GregorianDay(struct rtc_time *tm); -extern time_t last_rtc_update; - -extern void generic_calibrate_decr(void); -extern void wakeup_decrementer(void); -extern void snapshot_timebase(void); - -extern void set_dec_cpu6(unsigned int val); - -/* Some sane defaults: 125 MHz timebase, 1GHz processor */ -extern unsigned long ppc_proc_freq; -#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) -extern unsigned long ppc_tb_freq; -#define DEFAULT_TB_FREQ 125000000UL - -/* - * By putting all of this stuff into a single struct we - * reduce the number of cache lines touched by do_gettimeofday. - * Both by collecting all of the data in one cache line and - * by touching only one TOC entry on ppc64. - */ -struct gettimeofday_vars { - u64 tb_to_xs; - u64 stamp_xsec; - u64 tb_orig_stamp; -}; - -struct gettimeofday_struct { - unsigned long tb_ticks_per_sec; - struct gettimeofday_vars vars[2]; - struct gettimeofday_vars * volatile varp; - unsigned var_idx; - unsigned tb_to_us; -}; - -struct div_result { - u64 result_high; - u64 result_low; -}; - -/* Accessor functions for the timebase (RTC on 601) registers. */ -/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */ -#ifdef CONFIG_6xx -#define __USE_RTC() (!cpu_has_feature(CPU_FTR_USE_TB)) -#else -#define __USE_RTC() 0 -#endif - -#ifdef CONFIG_PPC64 - -/* For compatibility, get_tbl() is defined as get_tb() on ppc64 */ -#define get_tbl get_tb - -#else - -static inline unsigned long get_tbl(void) -{ -#if defined(CONFIG_403GCX) - unsigned long tbl; - asm volatile("mfspr %0, 0x3dd" : "=r" (tbl)); - return tbl; -#else - return mftbl(); -#endif -} - -static inline unsigned int get_tbu(void) -{ -#ifdef CONFIG_403GCX - unsigned int tbu; - asm volatile("mfspr %0, 0x3dc" : "=r" (tbu)); - return tbu; -#else - return mftbu(); -#endif -} -#endif /* !CONFIG_PPC64 */ - -static inline unsigned int get_rtcl(void) -{ - unsigned int rtcl; - - asm volatile("mfrtcl %0" : "=r" (rtcl)); - return rtcl; -} - -static inline u64 get_rtc(void) -{ - unsigned int hi, lo, hi2; - - do { - asm volatile("mfrtcu %0; mfrtcl %1; mfrtcu %2" - : "=r" (hi), "=r" (lo), "=r" (hi2)); - } while (hi2 != hi); - return (u64)hi * 1000000000 + lo; -} - -#ifdef CONFIG_PPC64 -static inline u64 get_tb(void) -{ - return mftb(); -} -#else /* CONFIG_PPC64 */ -static inline u64 get_tb(void) -{ - unsigned int tbhi, tblo, tbhi2; - - do { - tbhi = get_tbu(); - tblo = get_tbl(); - tbhi2 = get_tbu(); - } while (tbhi != tbhi2); - - return ((u64)tbhi << 32) | tblo; -} -#endif /* !CONFIG_PPC64 */ - -static inline u64 get_tb_or_rtc(void) -{ - return __USE_RTC() ? get_rtc() : get_tb(); -} - -static inline void set_tb(unsigned int upper, unsigned int lower) -{ - mtspr(SPRN_TBWL, 0); - mtspr(SPRN_TBWU, upper); - mtspr(SPRN_TBWL, lower); -} - -/* Accessor functions for the decrementer register. - * The 4xx doesn't even have a decrementer. I tried to use the - * generic timer interrupt code, which seems OK, with the 4xx PIT - * in auto-reload mode. The problem is PIT stops counting when it - * hits zero. If it would wrap, we could use it just like a decrementer. - */ -static inline unsigned int get_dec(void) -{ -#if defined(CONFIG_40x) - return (mfspr(SPRN_PIT)); -#else - return (mfspr(SPRN_DEC)); -#endif -} - -/* - * Note: Book E and 4xx processors differ from other PowerPC processors - * in when the decrementer generates its interrupt: on the 1 to 0 - * transition for Book E/4xx, but on the 0 to -1 transition for others. - */ -static inline void set_dec(int val) -{ -#if defined(CONFIG_40x) - mtspr(SPRN_PIT, val); -#elif defined(CONFIG_8xx_CPU6) - set_dec_cpu6(val - 1); -#else -#ifndef CONFIG_BOOKE - --val; -#endif -#ifdef CONFIG_PPC_ISERIES - if (firmware_has_feature(FW_FEATURE_ISERIES) && - get_lppaca()->shared_proc) { - get_lppaca()->virtual_decr = val; - if (get_dec() > val) - HvCall_setVirtualDecr(); - return; - } -#endif - mtspr(SPRN_DEC, val); -#endif /* not 40x or 8xx_CPU6 */ -} - -static inline unsigned long tb_ticks_since(unsigned long tstamp) -{ - if (__USE_RTC()) { - int delta = get_rtcl() - (unsigned int) tstamp; - return delta < 0 ? delta + 1000000000 : delta; - } - return get_tbl() - tstamp; -} - -#define mulhwu(x,y) \ -({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) - -#ifdef CONFIG_PPC64 -#define mulhdu(x,y) \ -({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) -#else -extern u64 mulhdu(u64, u64); -#endif - -extern void smp_space_timers(unsigned int); - -extern unsigned mulhwu_scale_factor(unsigned, unsigned); -extern void div128_by_32(u64 dividend_high, u64 dividend_low, - unsigned divisor, struct div_result *dr); - -/* Used to store Processor Utilization register (purr) values */ - -struct cpu_usage { - u64 current_tb; /* Holds the current purr register values */ -}; - -DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array); - -#if defined(CONFIG_VIRT_CPU_ACCOUNTING) -extern void calculate_steal_time(void); -extern void snapshot_timebases(void); -#define account_process_vtime(tsk) account_process_tick(tsk, 0) -#else -#define calculate_steal_time() do { } while (0) -#define snapshot_timebases() do { } while (0) -#define account_process_vtime(tsk) do { } while (0) -#endif - -extern void secondary_cpu_time_init(void); -extern void iSeries_time_init_early(void); - -#endif /* __KERNEL__ */ -#endif /* __POWERPC_TIME_H */ diff --git a/include/asm-powerpc/timex.h b/include/asm-powerpc/timex.h deleted file mode 100644 index c55e14f7ef44..000000000000 --- a/include/asm-powerpc/timex.h +++ /dev/null @@ -1,50 +0,0 @@ -#ifndef _ASM_POWERPC_TIMEX_H -#define _ASM_POWERPC_TIMEX_H - -#ifdef __KERNEL__ - -/* - * PowerPC architecture timex specifications - */ - -#include -#include - -#define CLOCK_TICK_RATE 1024000 /* Underlying HZ */ - -typedef unsigned long cycles_t; - -static inline cycles_t get_cycles(void) -{ -#ifdef __powerpc64__ - return mftb(); -#else - cycles_t ret; - - /* - * For the "cycle" counter we use the timebase lower half. - * Currently only used on SMP. - */ - - ret = 0; - - __asm__ __volatile__( - "97: mftb %0\n" - "99:\n" - ".section __ftr_fixup,\"a\"\n" - ".align 2\n" - "98:\n" - " .long %1\n" - " .long 0\n" - " .long 97b-98b\n" - " .long 99b-98b\n" - " .long 0\n" - " .long 0\n" - ".previous" - : "=r" (ret) : "i" (CPU_FTR_601)); - return ret; -#endif -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_TIMEX_H */ diff --git a/include/asm-powerpc/tlb.h b/include/asm-powerpc/tlb.h deleted file mode 100644 index e20ff7541f36..000000000000 --- a/include/asm-powerpc/tlb.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * TLB shootdown specifics for powerpc - * - * Copyright (C) 2002 Anton Blanchard, IBM Corp. - * Copyright (C) 2002 Paul Mackerras, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_POWERPC_TLB_H -#define _ASM_POWERPC_TLB_H -#ifdef __KERNEL__ - -#ifndef __powerpc64__ -#include -#endif -#include -#include -#ifndef __powerpc64__ -#include -#include -#endif - -#include - -struct mmu_gather; - -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) - -#if !defined(CONFIG_PPC_STD_MMU) - -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -#elif defined(__powerpc64__) - -extern void pte_free_finish(void); - -static inline void tlb_flush(struct mmu_gather *tlb) -{ - struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch); - - /* If there's a TLB batch pending, then we must flush it because the - * pages are going to be freed and we really don't want to have a CPU - * access a freed page because it has a stale TLB - */ - if (tlbbatch->index) - __flush_tlb_pending(tlbbatch); - - pte_free_finish(); -} - -#else - -extern void tlb_flush(struct mmu_gather *tlb); - -#endif - -/* Get the generic bits... */ -#include - -#if !defined(CONFIG_PPC_STD_MMU) || defined(__powerpc64__) - -#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) - -#else -extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, - unsigned long address); - -static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, - unsigned long address) -{ - if (pte_val(*ptep) & _PAGE_HASHPTE) - flush_hash_entry(tlb->mm, ptep, address); -} - -#endif -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_TLB_H */ diff --git a/include/asm-powerpc/tlbflush.h b/include/asm-powerpc/tlbflush.h deleted file mode 100644 index 361cd5c7a32b..000000000000 --- a/include/asm-powerpc/tlbflush.h +++ /dev/null @@ -1,166 +0,0 @@ -#ifndef _ASM_POWERPC_TLBFLUSH_H -#define _ASM_POWERPC_TLBFLUSH_H - -/* - * TLB flushing: - * - * - flush_tlb_mm(mm) flushes the specified mm context TLB's - * - flush_tlb_page(vma, vmaddr) flushes one page - * - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB - * - flush_tlb_range(vma, start, end) flushes a range of pages - * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifdef __KERNEL__ - -#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE) -/* - * TLB flushing for software loaded TLB chips - * - * TODO: (CONFIG_FSL_BOOKE) determine if flush_tlb_range & - * flush_tlb_kernel_range are best implemented as tlbia vs - * specific tlbie's - */ - -#include - -extern void _tlbie(unsigned long address, unsigned int pid); - -#if defined(CONFIG_40x) || defined(CONFIG_8xx) -#define _tlbia() asm volatile ("tlbia; sync" : : : "memory") -#else /* CONFIG_44x || CONFIG_FSL_BOOKE */ -extern void _tlbia(void); -#endif - -static inline void flush_tlb_mm(struct mm_struct *mm) -{ - _tlbia(); -} - -static inline void flush_tlb_page(struct vm_area_struct *vma, - unsigned long vmaddr) -{ - _tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0); -} - -static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, - unsigned long vmaddr) -{ - _tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0); -} - -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ - _tlbia(); -} - -static inline void flush_tlb_kernel_range(unsigned long start, - unsigned long end) -{ - _tlbia(); -} - -#elif defined(CONFIG_PPC32) -/* - * TLB flushing for "classic" hash-MMMU 32-bit CPUs, 6xx, 7xx, 7xxx - */ -extern void _tlbie(unsigned long address); -extern void _tlbia(void); - -extern void flush_tlb_mm(struct mm_struct *mm); -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); -extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr); -extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); - -#else -/* - * TLB flushing for 64-bit has-MMU CPUs - */ - -#include -#include - -#define PPC64_TLB_BATCH_NR 192 - -struct ppc64_tlb_batch { - int active; - unsigned long index; - struct mm_struct *mm; - real_pte_t pte[PPC64_TLB_BATCH_NR]; - unsigned long vaddr[PPC64_TLB_BATCH_NR]; - unsigned int psize; - int ssize; -}; -DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); - -extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch); - -extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, unsigned long pte, int huge); - -#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE - -static inline void arch_enter_lazy_mmu_mode(void) -{ - struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); - - batch->active = 1; -} - -static inline void arch_leave_lazy_mmu_mode(void) -{ - struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); - - if (batch->index) - __flush_tlb_pending(batch); - batch->active = 0; -} - -#define arch_flush_lazy_mmu_mode() do {} while (0) - - -extern void flush_hash_page(unsigned long va, real_pte_t pte, int psize, - int ssize, int local); -extern void flush_hash_range(unsigned long number, int local); - - -static inline void flush_tlb_mm(struct mm_struct *mm) -{ -} - -static inline void flush_tlb_page(struct vm_area_struct *vma, - unsigned long vmaddr) -{ -} - -static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, - unsigned long vmaddr) -{ -} - -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ -} - -static inline void flush_tlb_kernel_range(unsigned long start, - unsigned long end) -{ -} - -/* Private function for use by PCI IO mapping code */ -extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start, - unsigned long end); - - -#endif - -#endif /*__KERNEL__ */ -#endif /* _ASM_POWERPC_TLBFLUSH_H */ diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h deleted file mode 100644 index c32da6f97999..000000000000 --- a/include/asm-powerpc/topology.h +++ /dev/null @@ -1,117 +0,0 @@ -#ifndef _ASM_POWERPC_TOPOLOGY_H -#define _ASM_POWERPC_TOPOLOGY_H -#ifdef __KERNEL__ - - -struct sys_device; -struct device_node; - -#ifdef CONFIG_NUMA - -#include - -static inline int cpu_to_node(int cpu) -{ - return numa_cpu_lookup_table[cpu]; -} - -#define parent_node(node) (node) - -static inline cpumask_t node_to_cpumask(int node) -{ - return numa_cpumask_lookup_table[node]; -} - -static inline int node_to_first_cpu(int node) -{ - cpumask_t tmp; - tmp = node_to_cpumask(node); - return first_cpu(tmp); -} - -int of_node_to_nid(struct device_node *device); - -struct pci_bus; -#ifdef CONFIG_PCI -extern int pcibus_to_node(struct pci_bus *bus); -#else -static inline int pcibus_to_node(struct pci_bus *bus) -{ - return -1; -} -#endif - -#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ - CPU_MASK_ALL : \ - node_to_cpumask(pcibus_to_node(bus)) \ - ) - -/* sched_domains SD_NODE_INIT for PPC64 machines */ -#define SD_NODE_INIT (struct sched_domain) { \ - .span = CPU_MASK_NONE, \ - .parent = NULL, \ - .child = NULL, \ - .groups = NULL, \ - .min_interval = 8, \ - .max_interval = 32, \ - .busy_factor = 32, \ - .imbalance_pct = 125, \ - .cache_nice_tries = 1, \ - .busy_idx = 3, \ - .idle_idx = 1, \ - .newidle_idx = 2, \ - .wake_idx = 1, \ - .flags = SD_LOAD_BALANCE \ - | SD_BALANCE_EXEC \ - | SD_BALANCE_NEWIDLE \ - | SD_WAKE_IDLE \ - | SD_SERIALIZE \ - | SD_WAKE_BALANCE, \ - .last_balance = jiffies, \ - .balance_interval = 1, \ - .nr_balance_failed = 0, \ -} - -extern void __init dump_numa_cpu_topology(void); - -extern int sysfs_add_device_to_node(struct sys_device *dev, int nid); -extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid); - -#else - -static inline int of_node_to_nid(struct device_node *device) -{ - return 0; -} - -static inline void dump_numa_cpu_topology(void) {} - -static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid) -{ - return 0; -} - -static inline void sysfs_remove_device_from_node(struct sys_device *dev, - int nid) -{ -} - -#endif /* CONFIG_NUMA */ - -#include - -#ifdef CONFIG_SMP -#include -#define smt_capable() (cpu_has_feature(CPU_FTR_SMT)) - -#ifdef CONFIG_PPC64 -#include - -#define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu)) -#define topology_core_siblings(cpu) (per_cpu(cpu_core_map, cpu)) -#define topology_core_id(cpu) (cpu_to_core_id(cpu)) -#endif -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_TOPOLOGY_H */ diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h deleted file mode 100644 index f8b60793b7a9..000000000000 --- a/include/asm-powerpc/tsi108.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * common routine and memory layout for Tundra TSI108(Grendel) host bridge - * memory controller. - * - * Author: Jacob Pan (jacob.pan@freescale.com) - * Alex Bounine (alexandreb@tundra.com) - * - * Copyright 2004-2006 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __PPC_KERNEL_TSI108_H -#define __PPC_KERNEL_TSI108_H - -#include - -/* Size of entire register space */ -#define TSI108_REG_SIZE (0x10000) - -/* Sizes of register spaces for individual blocks */ -#define TSI108_HLP_SIZE 0x1000 -#define TSI108_PCI_SIZE 0x1000 -#define TSI108_CLK_SIZE 0x1000 -#define TSI108_PB_SIZE 0x1000 -#define TSI108_SD_SIZE 0x1000 -#define TSI108_DMA_SIZE 0x1000 -#define TSI108_ETH_SIZE 0x1000 -#define TSI108_I2C_SIZE 0x400 -#define TSI108_MPIC_SIZE 0x400 -#define TSI108_UART0_SIZE 0x200 -#define TSI108_GPIO_SIZE 0x200 -#define TSI108_UART1_SIZE 0x200 - -/* Offsets within Tsi108(A) CSR space for individual blocks */ -#define TSI108_HLP_OFFSET 0x0000 -#define TSI108_PCI_OFFSET 0x1000 -#define TSI108_CLK_OFFSET 0x2000 -#define TSI108_PB_OFFSET 0x3000 -#define TSI108_SD_OFFSET 0x4000 -#define TSI108_DMA_OFFSET 0x5000 -#define TSI108_ETH_OFFSET 0x6000 -#define TSI108_I2C_OFFSET 0x7000 -#define TSI108_MPIC_OFFSET 0x7400 -#define TSI108_UART0_OFFSET 0x7800 -#define TSI108_GPIO_OFFSET 0x7A00 -#define TSI108_UART1_OFFSET 0x7C00 - -/* Tsi108 registers used by common code components */ -#define TSI108_PCI_CSR (0x004) -#define TSI108_PCI_IRP_CFG_CTL (0x180) -#define TSI108_PCI_IRP_STAT (0x184) -#define TSI108_PCI_IRP_ENABLE (0x188) -#define TSI108_PCI_IRP_INTAD (0x18C) - -#define TSI108_PCI_IRP_STAT_P_INT (0x00400000) -#define TSI108_PCI_IRP_ENABLE_P_INT (0x00400000) - -#define TSI108_CG_PWRUP_STATUS (0x234) - -#define TSI108_PB_ISR (0x00C) -#define TSI108_PB_ERRCS (0x404) -#define TSI108_PB_AERR (0x408) - -#define TSI108_PB_ERRCS_ES (1 << 1) -#define TSI108_PB_ISR_PBS_RD_ERR (1 << 8) - -#define TSI108_PCI_CFG_SIZE (0x01000000) - -/* - * PHY Configuration Options - * - * Specify "bcm54xx" in the compatible property of your device tree phy - * nodes if your board uses the Broadcom PHYs - */ -#define TSI108_PHY_MV88E 0 /* Marvel 88Exxxx PHY */ -#define TSI108_PHY_BCM54XX 1 /* Broardcom BCM54xx PHY */ - -/* Global variables */ - -extern u32 tsi108_pci_cfg_base; -/* Exported functions */ - -extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base); -extern unsigned long tsi108_get_mem_size(void); -extern unsigned long tsi108_get_cpu_clk(void); -extern unsigned long tsi108_get_sdc_clk(void); -extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val); -extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 * val); -extern void tsi108_clear_pci_error(u32 pci_cfg_base); - -extern phys_addr_t get_csrbase(void); - -typedef struct { - u32 regs; /* hw registers base address */ - u32 phyregs; /* phy registers base address */ - u16 phy; /* phy address */ - u16 irq_num; /* irq number */ - u8 mac_addr[6]; /* phy mac address */ - u16 phy_type; /* type of phy on board */ -} hw_info; - -extern u32 get_vir_csrbase(void); -extern u32 tsi108_csr_vir_base; - -static inline u32 tsi108_read_reg(u32 reg_offset) -{ - return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset)); -} - -static inline void tsi108_write_reg(u32 reg_offset, u32 val) -{ - out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val); -} - -#endif /* __PPC_KERNEL_TSI108_H */ diff --git a/include/asm-powerpc/tsi108_irq.h b/include/asm-powerpc/tsi108_irq.h deleted file mode 100644 index 6ed93979fbe4..000000000000 --- a/include/asm-powerpc/tsi108_irq.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * (C) Copyright 2005 Tundra Semiconductor Corp. - * Alex Bounine, - -/* Register definitions */ -#define TSI108_PCI_P2O_BAR0 (TSI108_PCI_OFFSET + 0x10) -#define TSI108_PCI_P2O_BAR0_UPPER (TSI108_PCI_OFFSET + 0x14) -#define TSI108_PCI_P2O_BAR2 (TSI108_PCI_OFFSET + 0x18) -#define TSI108_PCI_P2O_BAR2_UPPER (TSI108_PCI_OFFSET + 0x1c) -#define TSI108_PCI_P2O_PAGE_SIZES (TSI108_PCI_OFFSET + 0x4c) -#define TSI108_PCI_PFAB_BAR0 (TSI108_PCI_OFFSET + 0x204) -#define TSI108_PCI_PFAB_BAR0_UPPER (TSI108_PCI_OFFSET + 0x208) -#define TSI108_PCI_PFAB_IO (TSI108_PCI_OFFSET + 0x20c) -#define TSI108_PCI_PFAB_IO_UPPER (TSI108_PCI_OFFSET + 0x210) -#define TSI108_PCI_PFAB_MEM32 (TSI108_PCI_OFFSET + 0x214) -#define TSI108_PCI_PFAB_PFM3 (TSI108_PCI_OFFSET + 0x220) -#define TSI108_PCI_PFAB_PFM4 (TSI108_PCI_OFFSET + 0x230) - -extern int tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary); -extern void tsi108_pci_int_init(struct device_node *node); -extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc); -extern void tsi108_clear_pci_cfg_error(void); - -#endif /* _ASM_POWERPC_TSI108_PCI_H */ diff --git a/include/asm-powerpc/types.h b/include/asm-powerpc/types.h deleted file mode 100644 index d3374bc865ba..000000000000 --- a/include/asm-powerpc/types.h +++ /dev/null @@ -1,75 +0,0 @@ -#ifndef _ASM_POWERPC_TYPES_H -#define _ASM_POWERPC_TYPES_H - -#ifdef __powerpc64__ -# include -#else -# include -#endif - -#ifndef __ASSEMBLY__ - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifdef __powerpc64__ -typedef unsigned int umode_t; -#else -typedef unsigned short umode_t; -#endif - -typedef struct { - __u32 u[4]; -} __attribute__((aligned(16))) __vector128; - -#endif /* __ASSEMBLY__ */ - -#ifdef __KERNEL__ -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __powerpc64__ -#define BITS_PER_LONG 64 -#else -#define BITS_PER_LONG 32 -#endif - -#ifndef __ASSEMBLY__ - -typedef __vector128 vector128; - -/* Physical address used by some IO functions */ -#if defined(CONFIG_PPC64) || defined(CONFIG_PHYS_64BIT) -typedef u64 phys_addr_t; -#else -typedef u32 phys_addr_t; -#endif - -#ifdef __powerpc64__ -typedef u64 dma_addr_t; -#else -typedef u32 dma_addr_t; -#endif -typedef u64 dma64_addr_t; - -typedef struct { - unsigned long entry; - unsigned long toc; - unsigned long env; -} func_descr_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_TYPES_H */ diff --git a/include/asm-powerpc/uaccess.h b/include/asm-powerpc/uaccess.h deleted file mode 100644 index bd0fb8495154..000000000000 --- a/include/asm-powerpc/uaccess.h +++ /dev/null @@ -1,496 +0,0 @@ -#ifndef _ARCH_POWERPC_UACCESS_H -#define _ARCH_POWERPC_UACCESS_H - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -#include -#include -#include -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - * - * The fs/ds values are now the highest legal address in the "segment". - * This simplifies the checking in the routines below. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_DS MAKE_MM_SEG(~0UL) -#ifdef __powerpc64__ -/* We use TASK_SIZE_USER64 as TASK_SIZE is not constant */ -#define USER_DS MAKE_MM_SEG(TASK_SIZE_USER64 - 1) -#else -#define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) -#endif - -#define get_ds() (KERNEL_DS) -#define get_fs() (current->thread.fs) -#define set_fs(val) (current->thread.fs = (val)) - -#define segment_eq(a, b) ((a).seg == (b).seg) - -#ifdef __powerpc64__ -/* - * This check is sufficient because there is a large enough - * gap between user addresses and the kernel addresses - */ -#define __access_ok(addr, size, segment) \ - (((addr) <= (segment).seg) && ((size) <= (segment).seg)) - -#else - -#define __access_ok(addr, size, segment) \ - (((addr) <= (segment).seg) && \ - (((size) == 0) || (((size) - 1) <= ((segment).seg - (addr))))) - -#endif - -#define access_ok(type, addr, size) \ - (__chk_user_ptr(addr), \ - __access_ok((__force unsigned long)(addr), (size), get_fs())) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry { - unsigned long insn; - unsigned long fixup; -}; - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - * - * This gets kind of ugly. We want to return _two_ values in "get_user()" - * and yet we don't want to do any pointers, because that is too much - * of a performance impact. Thus we have a few rather ugly macros here, - * and hide all the ugliness from the user. - * - * The "__xxx" versions of the user access functions are versions that - * do not verify the address space, that must have been done previously - * with a separate "access_ok()" call (this is used when we do multiple - * accesses to the same area of user memory). - * - * As we use the same address space for kernel and user data on the - * PowerPC, we can just do these as direct assignments. (Of course, the - * exception handling means that it's no longer "just"...) - * - * The "user64" versions of the user access functions are versions that - * allow access of 64-bit data. The "get_user" functions do not - * properly handle 64-bit data because the value gets down cast to a long. - * The "put_user" functions already handle 64-bit data properly but we add - * "user64" versions for completeness - */ -#define get_user(x, ptr) \ - __get_user_check((x), (ptr), sizeof(*(ptr))) -#define put_user(x, ptr) \ - __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) - -#define __get_user(x, ptr) \ - __get_user_nocheck((x), (ptr), sizeof(*(ptr))) -#define __put_user(x, ptr) \ - __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) - -#ifndef __powerpc64__ -#define __get_user64(x, ptr) \ - __get_user64_nocheck((x), (ptr), sizeof(*(ptr))) -#define __put_user64(x, ptr) __put_user(x, ptr) -#endif - -#define __get_user_inatomic(x, ptr) \ - __get_user_nosleep((x), (ptr), sizeof(*(ptr))) -#define __put_user_inatomic(x, ptr) \ - __put_user_nosleep((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) - -#define __get_user_unaligned __get_user -#define __put_user_unaligned __put_user - -extern long __put_user_bad(void); - -/* - * We don't tell gcc that we are accessing memory, but this is OK - * because we do not write to any memory gcc knows about, so there - * are no aliasing issues. - */ -#define __put_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - "1: " op " %1,0(%2) # put_user\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - PPC_LONG_ALIGN "\n" \ - PPC_LONG "1b,3b\n" \ - ".previous" \ - : "=r" (err) \ - : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) - -#ifdef __powerpc64__ -#define __put_user_asm2(x, ptr, retval) \ - __put_user_asm(x, ptr, retval, "std") -#else /* __powerpc64__ */ -#define __put_user_asm2(x, addr, err) \ - __asm__ __volatile__( \ - "1: stw %1,0(%2)\n" \ - "2: stw %1+1,4(%2)\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - "4: li %0,%3\n" \ - " b 3b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - PPC_LONG_ALIGN "\n" \ - PPC_LONG "1b,4b\n" \ - PPC_LONG "2b,4b\n" \ - ".previous" \ - : "=r" (err) \ - : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) -#endif /* __powerpc64__ */ - -#define __put_user_size(x, ptr, size, retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: __put_user_asm(x, ptr, retval, "stb"); break; \ - case 2: __put_user_asm(x, ptr, retval, "sth"); break; \ - case 4: __put_user_asm(x, ptr, retval, "stw"); break; \ - case 8: __put_user_asm2(x, ptr, retval); break; \ - default: __put_user_bad(); \ - } \ -} while (0) - -#define __put_user_nocheck(x, ptr, size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - if (!is_kernel_addr((unsigned long)__pu_addr)) \ - might_sleep(); \ - __chk_user_ptr(ptr); \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x, ptr, size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - might_sleep(); \ - if (access_ok(VERIFY_WRITE, __pu_addr, size)) \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ - __pu_err; \ -}) - -#define __put_user_nosleep(x, ptr, size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ - __pu_err; \ -}) - - -extern long __get_user_bad(void); - -#define __get_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - "1: "op" %1,0(%2) # get_user\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " li %1,0\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - PPC_LONG_ALIGN "\n" \ - PPC_LONG "1b,3b\n" \ - ".previous" \ - : "=r" (err), "=r" (x) \ - : "b" (addr), "i" (-EFAULT), "0" (err)) - -#ifdef __powerpc64__ -#define __get_user_asm2(x, addr, err) \ - __get_user_asm(x, addr, err, "ld") -#else /* __powerpc64__ */ -#define __get_user_asm2(x, addr, err) \ - __asm__ __volatile__( \ - "1: lwz %1,0(%2)\n" \ - "2: lwz %1+1,4(%2)\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - "4: li %0,%3\n" \ - " li %1,0\n" \ - " li %1+1,0\n" \ - " b 3b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - PPC_LONG_ALIGN "\n" \ - PPC_LONG "1b,4b\n" \ - PPC_LONG "2b,4b\n" \ - ".previous" \ - : "=r" (err), "=&r" (x) \ - : "b" (addr), "i" (-EFAULT), "0" (err)) -#endif /* __powerpc64__ */ - -#define __get_user_size(x, ptr, size, retval) \ -do { \ - retval = 0; \ - __chk_user_ptr(ptr); \ - if (size > sizeof(x)) \ - (x) = __get_user_bad(); \ - switch (size) { \ - case 1: __get_user_asm(x, ptr, retval, "lbz"); break; \ - case 2: __get_user_asm(x, ptr, retval, "lhz"); break; \ - case 4: __get_user_asm(x, ptr, retval, "lwz"); break; \ - case 8: __get_user_asm2(x, ptr, retval); break; \ - default: (x) = __get_user_bad(); \ - } \ -} while (0) - -#define __get_user_nocheck(x, ptr, size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - if (!is_kernel_addr((unsigned long)__gu_addr)) \ - might_sleep(); \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#ifndef __powerpc64__ -#define __get_user64_nocheck(x, ptr, size) \ -({ \ - long __gu_err; \ - long long __gu_val; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - if (!is_kernel_addr((unsigned long)__gu_addr)) \ - might_sleep(); \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) -#endif /* __powerpc64__ */ - -#define __get_user_check(x, ptr, size) \ -({ \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - might_sleep(); \ - if (access_ok(VERIFY_READ, __gu_addr, (size))) \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_nosleep(x, ptr, size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - - -/* more complex routines */ - -extern unsigned long __copy_tofrom_user(void __user *to, - const void __user *from, unsigned long size); - -#ifndef __powerpc64__ - -static inline unsigned long copy_from_user(void *to, - const void __user *from, unsigned long n) -{ - unsigned long over; - - if (access_ok(VERIFY_READ, from, n)) - return __copy_tofrom_user((__force void __user *)to, from, n); - if ((unsigned long)from < TASK_SIZE) { - over = (unsigned long)from + n - TASK_SIZE; - return __copy_tofrom_user((__force void __user *)to, from, - n - over) + over; - } - return n; -} - -static inline unsigned long copy_to_user(void __user *to, - const void *from, unsigned long n) -{ - unsigned long over; - - if (access_ok(VERIFY_WRITE, to, n)) - return __copy_tofrom_user(to, (__force void __user *)from, n); - if ((unsigned long)to < TASK_SIZE) { - over = (unsigned long)to + n - TASK_SIZE; - return __copy_tofrom_user(to, (__force void __user *)from, - n - over) + over; - } - return n; -} - -#else /* __powerpc64__ */ - -#define __copy_in_user(to, from, size) \ - __copy_tofrom_user((to), (from), (size)) - -extern unsigned long copy_from_user(void *to, const void __user *from, - unsigned long n); -extern unsigned long copy_to_user(void __user *to, const void *from, - unsigned long n); -extern unsigned long copy_in_user(void __user *to, const void __user *from, - unsigned long n); - -#endif /* __powerpc64__ */ - -static inline unsigned long __copy_from_user_inatomic(void *to, - const void __user *from, unsigned long n) -{ - if (__builtin_constant_p(n) && (n <= 8)) { - unsigned long ret = 1; - - switch (n) { - case 1: - __get_user_size(*(u8 *)to, from, 1, ret); - break; - case 2: - __get_user_size(*(u16 *)to, from, 2, ret); - break; - case 4: - __get_user_size(*(u32 *)to, from, 4, ret); - break; - case 8: - __get_user_size(*(u64 *)to, from, 8, ret); - break; - } - if (ret == 0) - return 0; - } - return __copy_tofrom_user((__force void __user *)to, from, n); -} - -static inline unsigned long __copy_to_user_inatomic(void __user *to, - const void *from, unsigned long n) -{ - if (__builtin_constant_p(n) && (n <= 8)) { - unsigned long ret = 1; - - switch (n) { - case 1: - __put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret); - break; - case 2: - __put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret); - break; - case 4: - __put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret); - break; - case 8: - __put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret); - break; - } - if (ret == 0) - return 0; - } - return __copy_tofrom_user(to, (__force const void __user *)from, n); -} - -static inline unsigned long __copy_from_user(void *to, - const void __user *from, unsigned long size) -{ - might_sleep(); - return __copy_from_user_inatomic(to, from, size); -} - -static inline unsigned long __copy_to_user(void __user *to, - const void *from, unsigned long size) -{ - might_sleep(); - return __copy_to_user_inatomic(to, from, size); -} - -extern unsigned long __clear_user(void __user *addr, unsigned long size); - -static inline unsigned long clear_user(void __user *addr, unsigned long size) -{ - might_sleep(); - if (likely(access_ok(VERIFY_WRITE, addr, size))) - return __clear_user(addr, size); - if ((unsigned long)addr < TASK_SIZE) { - unsigned long over = (unsigned long)addr + size - TASK_SIZE; - return __clear_user(addr, size - over) + over; - } - return size; -} - -extern int __strncpy_from_user(char *dst, const char __user *src, long count); - -static inline long strncpy_from_user(char *dst, const char __user *src, - long count) -{ - might_sleep(); - if (likely(access_ok(VERIFY_READ, src, 1))) - return __strncpy_from_user(dst, src, count); - return -EFAULT; -} - -/* - * Return the size of a string (including the ending 0) - * - * Return 0 for error - */ -extern int __strnlen_user(const char __user *str, long len, unsigned long top); - -/* - * Returns the length of the string at str (including the null byte), - * or 0 if we hit a page we can't access, - * or something > len if we didn't find a null byte. - * - * The `top' parameter to __strnlen_user is to make sure that - * we can never overflow from the user area into kernel space. - */ -static inline int strnlen_user(const char __user *str, long len) -{ - unsigned long top = current->thread.fs.seg; - - if ((unsigned long)str > top) - return 0; - return __strnlen_user(str, len, top); -} - -#define strlen_user(str) strnlen_user((str), 0x7ffffffe) - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ - -#endif /* _ARCH_POWERPC_UACCESS_H */ diff --git a/include/asm-powerpc/ucc.h b/include/asm-powerpc/ucc.h deleted file mode 100644 index 46b09ba6bead..000000000000 --- a/include/asm-powerpc/ucc.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. - * - * Authors: Shlomi Gridish - * Li Yang - * - * Description: - * Internal header file for UCC unit routines. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __UCC_H__ -#define __UCC_H__ - -#include -#include - -#define STATISTICS - -#define UCC_MAX_NUM 8 - -/* Slow or fast type for UCCs. -*/ -enum ucc_speed_type { - UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX, - UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX -}; - -/* ucc_set_type - * Sets UCC to slow or fast mode. - * - * ucc_num - (In) number of UCC (0-7). - * speed - (In) slow or fast mode for UCC. - */ -int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed); - -int ucc_set_qe_mux_mii_mng(unsigned int ucc_num); - -int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock, - enum comm_dir mode); - -int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask); - -/* QE MUX clock routing for UCC -*/ -static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set) -{ - return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT); -} - -static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set) -{ - return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA); -} - -static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set) -{ - return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT); -} - -#endif /* __UCC_H__ */ diff --git a/include/asm-powerpc/ucc_fast.h b/include/asm-powerpc/ucc_fast.h deleted file mode 100644 index fce16abe7ee1..000000000000 --- a/include/asm-powerpc/ucc_fast.h +++ /dev/null @@ -1,246 +0,0 @@ -/* - * include/asm-powerpc/ucc_fast.h - * - * Internal header file for UCC FAST unit routines. - * - * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. - * - * Authors: Shlomi Gridish - * Li Yang - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __UCC_FAST_H__ -#define __UCC_FAST_H__ - -#include - -#include -#include - -#include "ucc.h" - -/* Receive BD's status */ -#define R_E 0x80000000 /* buffer empty */ -#define R_W 0x20000000 /* wrap bit */ -#define R_I 0x10000000 /* interrupt on reception */ -#define R_L 0x08000000 /* last */ -#define R_F 0x04000000 /* first */ - -/* transmit BD's status */ -#define T_R 0x80000000 /* ready bit */ -#define T_W 0x20000000 /* wrap bit */ -#define T_I 0x10000000 /* interrupt on completion */ -#define T_L 0x08000000 /* last */ - -/* Rx Data buffer must be 4 bytes aligned in most cases */ -#define UCC_FAST_RX_ALIGN 4 -#define UCC_FAST_MRBLR_ALIGNMENT 4 -#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8 - -/* Sizes */ -#define UCC_FAST_URFS_MIN_VAL 0x88 -#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8 - -/* ucc_fast_channel_protocol_mode - UCC FAST mode */ -enum ucc_fast_channel_protocol_mode { - UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000, - UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001, - UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002, - UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003, - UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004, - UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005, - UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006, - UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007, - UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008, - UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009, - UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A, - UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B, - UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C, - UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D, - UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E, - UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F -}; - -/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */ -enum ucc_fast_transparent_txrx { - UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000, - UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000 -}; - -/* UCC fast diagnostic mode */ -enum ucc_fast_diag_mode { - UCC_FAST_DIAGNOSTIC_NORMAL = 0x0, - UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000, - UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000, - UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000 -}; - -/* UCC fast Sync length (transparent mode only) */ -enum ucc_fast_sync_len { - UCC_FAST_SYNC_LEN_NOT_USED = 0x0, - UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000, - UCC_FAST_SYNC_LEN_8_BIT = 0x00008000, - UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000 -}; - -/* UCC fast RTS mode */ -enum ucc_fast_ready_to_send { - UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000, - UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000 -}; - -/* UCC fast receiver decoding mode */ -enum ucc_fast_rx_decoding_method { - UCC_FAST_RX_ENCODING_NRZ = 0x00000000, - UCC_FAST_RX_ENCODING_NRZI = 0x00000800, - UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000, - UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800 -}; - -/* UCC fast transmitter encoding mode */ -enum ucc_fast_tx_encoding_method { - UCC_FAST_TX_ENCODING_NRZ = 0x00000000, - UCC_FAST_TX_ENCODING_NRZI = 0x00000100, - UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200, - UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300 -}; - -/* UCC fast CRC length */ -enum ucc_fast_transparent_tcrc { - UCC_FAST_16_BIT_CRC = 0x00000000, - UCC_FAST_CRC_RESERVED0 = 0x00000040, - UCC_FAST_32_BIT_CRC = 0x00000080, - UCC_FAST_CRC_RESERVED1 = 0x000000C0 -}; - -/* Fast UCC initialization structure */ -struct ucc_fast_info { - int ucc_num; - enum qe_clock rx_clock; - enum qe_clock tx_clock; - u32 regs; - int irq; - u32 uccm_mask; - int bd_mem_part; - int brkpt_support; - int grant_support; - int tsa; - int cdp; - int cds; - int ctsp; - int ctss; - int tci; - int txsy; - int rtsm; - int revd; - int rsyn; - u16 max_rx_buf_length; - u16 urfs; - u16 urfet; - u16 urfset; - u16 utfs; - u16 utfet; - u16 utftt; - u16 ufpt; - enum ucc_fast_channel_protocol_mode mode; - enum ucc_fast_transparent_txrx ttx_trx; - enum ucc_fast_tx_encoding_method tenc; - enum ucc_fast_rx_decoding_method renc; - enum ucc_fast_transparent_tcrc tcrc; - enum ucc_fast_sync_len synl; -}; - -struct ucc_fast_private { - struct ucc_fast_info *uf_info; - struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */ - u32 __iomem *p_ucce; /* a pointer to the event register in memory. */ - u32 __iomem *p_uccm; /* a pointer to the mask register in memory. */ -#ifdef CONFIG_UGETH_TX_ON_DEMAND - u16 __iomem *p_utodr; /* pointer to the transmit on demand register */ -#endif - int enabled_tx; /* Whether channel is enabled for Tx (ENT) */ - int enabled_rx; /* Whether channel is enabled for Rx (ENR) */ - int stopped_tx; /* Whether channel has been stopped for Tx - (STOP_TX, etc.) */ - int stopped_rx; /* Whether channel has been stopped for Rx */ - u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx - virtual fifo */ - u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx - virtual fifo */ -#ifdef STATISTICS - u32 tx_frames; /* Transmitted frames counter. */ - u32 rx_frames; /* Received frames counter (only frames - passed to application). */ - u32 tx_discarded; /* Discarded tx frames counter (frames that - were discarded by the driver due to errors). - */ - u32 rx_discarded; /* Discarded rx frames counter (frames that - were discarded by the driver due to errors). - */ -#endif /* STATISTICS */ - u16 mrblr; /* maximum receive buffer length */ -}; - -/* ucc_fast_init - * Initializes Fast UCC according to user provided parameters. - * - * uf_info - (In) pointer to the fast UCC info structure. - * uccf_ret - (Out) pointer to the fast UCC structure. - */ -int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret); - -/* ucc_fast_free - * Frees all resources for fast UCC. - * - * uccf - (In) pointer to the fast UCC structure. - */ -void ucc_fast_free(struct ucc_fast_private * uccf); - -/* ucc_fast_enable - * Enables a fast UCC port. - * This routine enables Tx and/or Rx through the General UCC Mode Register. - * - * uccf - (In) pointer to the fast UCC structure. - * mode - (In) TX, RX, or both. - */ -void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode); - -/* ucc_fast_disable - * Disables a fast UCC port. - * This routine disables Tx and/or Rx through the General UCC Mode Register. - * - * uccf - (In) pointer to the fast UCC structure. - * mode - (In) TX, RX, or both. - */ -void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode); - -/* ucc_fast_irq - * Handles interrupts on fast UCC. - * Called from the general interrupt routine to handle interrupts on fast UCC. - * - * uccf - (In) pointer to the fast UCC structure. - */ -void ucc_fast_irq(struct ucc_fast_private * uccf); - -/* ucc_fast_transmit_on_demand - * Immediately forces a poll of the transmitter for data to be sent. - * Typically, the hardware performs a periodic poll for data that the - * transmit routine has set up to be transmitted. In cases where - * this polling cycle is not soon enough, this optional routine can - * be invoked to force a poll right away, instead. Proper use for - * each transmission for which this functionality is desired is to - * call the transmit routine and then this routine right after. - * - * uccf - (In) pointer to the fast UCC structure. - */ -void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf); - -u32 ucc_fast_get_qe_cr_subblock(int uccf_num); - -void ucc_fast_dump_regs(struct ucc_fast_private * uccf); - -#endif /* __UCC_FAST_H__ */ diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h deleted file mode 100644 index 0980e6ad335b..000000000000 --- a/include/asm-powerpc/ucc_slow.h +++ /dev/null @@ -1,290 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. - * - * Authors: Shlomi Gridish - * Li Yang - * - * Description: - * Internal header file for UCC SLOW unit routines. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __UCC_SLOW_H__ -#define __UCC_SLOW_H__ - -#include - -#include -#include - -#include "ucc.h" - -/* transmit BD's status */ -#define T_R 0x80000000 /* ready bit */ -#define T_PAD 0x40000000 /* add pads to short frames */ -#define T_W 0x20000000 /* wrap bit */ -#define T_I 0x10000000 /* interrupt on completion */ -#define T_L 0x08000000 /* last */ - -#define T_A 0x04000000 /* Address - the data transmitted as address - chars */ -#define T_TC 0x04000000 /* transmit CRC */ -#define T_CM 0x02000000 /* continuous mode */ -#define T_DEF 0x02000000 /* collision on previous attempt to transmit */ -#define T_P 0x01000000 /* Preamble - send Preamble sequence before - data */ -#define T_HB 0x01000000 /* heartbeat */ -#define T_NS 0x00800000 /* No Stop */ -#define T_LC 0x00800000 /* late collision */ -#define T_RL 0x00400000 /* retransmission limit */ -#define T_UN 0x00020000 /* underrun */ -#define T_CT 0x00010000 /* CTS lost */ -#define T_CSL 0x00010000 /* carrier sense lost */ -#define T_RC 0x003c0000 /* retry count */ - -/* Receive BD's status */ -#define R_E 0x80000000 /* buffer empty */ -#define R_W 0x20000000 /* wrap bit */ -#define R_I 0x10000000 /* interrupt on reception */ -#define R_L 0x08000000 /* last */ -#define R_C 0x08000000 /* the last byte in this buffer is a cntl - char */ -#define R_F 0x04000000 /* first */ -#define R_A 0x04000000 /* the first byte in this buffer is address - byte */ -#define R_CM 0x02000000 /* continuous mode */ -#define R_ID 0x01000000 /* buffer close on reception of idles */ -#define R_M 0x01000000 /* Frame received because of promiscuous - mode */ -#define R_AM 0x00800000 /* Address match */ -#define R_DE 0x00800000 /* Address match */ -#define R_LG 0x00200000 /* Break received */ -#define R_BR 0x00200000 /* Frame length violation */ -#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */ -#define R_FR 0x00100000 /* Framing Error (no stop bit) character - received */ -#define R_PR 0x00080000 /* Parity Error character received */ -#define R_AB 0x00080000 /* Frame Aborted */ -#define R_SH 0x00080000 /* frame is too short */ -#define R_CR 0x00040000 /* CRC Error */ -#define R_OV 0x00020000 /* Overrun */ -#define R_CD 0x00010000 /* CD lost */ -#define R_CL 0x00010000 /* this frame is closed because of a - collision */ - -/* Rx Data buffer must be 4 bytes aligned in most cases.*/ -#define UCC_SLOW_RX_ALIGN 4 -#define UCC_SLOW_MRBLR_ALIGNMENT 4 -#define UCC_SLOW_PRAM_SIZE 0x100 -#define ALIGNMENT_OF_UCC_SLOW_PRAM 64 - -/* UCC Slow Channel Protocol Mode */ -enum ucc_slow_channel_protocol_mode { - UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002, - UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004, - UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008, -}; - -/* UCC Slow Transparent Transmit CRC (TCRC) */ -enum ucc_slow_transparent_tcrc { - /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */ - UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000, - /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */ - UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000, - /* 32-bit CCITT CRC (Ethernet and HDLC) */ - UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000, -}; - -/* UCC Slow oversampling rate for transmitter (TDCR) */ -enum ucc_slow_tx_oversampling_rate { - /* 1x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000, - /* 8x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000, - /* 16x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000, - /* 32x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000, -}; - -/* UCC Slow Oversampling rate for receiver (RDCR) -*/ -enum ucc_slow_rx_oversampling_rate { - /* 1x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000, - /* 8x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000, - /* 16x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000, - /* 32x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000, -}; - -/* UCC Slow Transmitter encoding method (TENC) -*/ -enum ucc_slow_tx_encoding_method { - UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000, - UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100 -}; - -/* UCC Slow Receiver decoding method (RENC) -*/ -enum ucc_slow_rx_decoding_method { - UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000, - UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800 -}; - -/* UCC Slow Diagnostic mode (DIAG) -*/ -enum ucc_slow_diag_mode { - UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000, - UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040, - UCC_SLOW_DIAG_MODE_ECHO = 0x00000080, - UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0 -}; - -struct ucc_slow_info { - int ucc_num; - int protocol; /* QE_CR_PROTOCOL_xxx */ - enum qe_clock rx_clock; - enum qe_clock tx_clock; - phys_addr_t regs; - int irq; - u16 uccm_mask; - int data_mem_part; - int init_tx; - int init_rx; - u32 tx_bd_ring_len; - u32 rx_bd_ring_len; - int rx_interrupts; - int brkpt_support; - int grant_support; - int tsa; - int cdp; - int cds; - int ctsp; - int ctss; - int rinv; - int tinv; - int rtsm; - int rfw; - int tci; - int tend; - int tfl; - int txsy; - u16 max_rx_buf_length; - enum ucc_slow_transparent_tcrc tcrc; - enum ucc_slow_channel_protocol_mode mode; - enum ucc_slow_diag_mode diag; - enum ucc_slow_tx_oversampling_rate tdcr; - enum ucc_slow_rx_oversampling_rate rdcr; - enum ucc_slow_tx_encoding_method tenc; - enum ucc_slow_rx_decoding_method renc; -}; - -struct ucc_slow_private { - struct ucc_slow_info *us_info; - struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */ - struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */ - u32 us_pram_offset; - int enabled_tx; /* Whether channel is enabled for Tx (ENT) */ - int enabled_rx; /* Whether channel is enabled for Rx (ENR) */ - int stopped_tx; /* Whether channel has been stopped for Tx - (STOP_TX, etc.) */ - int stopped_rx; /* Whether channel has been stopped for Rx */ - struct list_head confQ; /* frames passed to chip waiting for tx */ - u32 first_tx_bd_mask; /* mask is used in Tx routine to save status - and length for first BD in a frame */ - u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */ - u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */ - struct qe_bd *confBd; /* next BD for confirm after Tx */ - struct qe_bd *tx_bd; /* next BD for new Tx request */ - struct qe_bd *rx_bd; /* next BD to collect after Rx */ - void *p_rx_frame; /* accumulating receive frame */ - u16 *p_ucce; /* a pointer to the event register in memory. - */ - u16 *p_uccm; /* a pointer to the mask register in memory */ - u16 saved_uccm; /* a saved mask for the RX Interrupt bits */ -#ifdef STATISTICS - u32 tx_frames; /* Transmitted frames counters */ - u32 rx_frames; /* Received frames counters (only frames - passed to application) */ - u32 rx_discarded; /* Discarded frames counters (frames that - were discarded by the driver due to - errors) */ -#endif /* STATISTICS */ -}; - -/* ucc_slow_init - * Initializes Slow UCC according to provided parameters. - * - * us_info - (In) pointer to the slow UCC info structure. - * uccs_ret - (Out) pointer to the slow UCC structure. - */ -int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret); - -/* ucc_slow_free - * Frees all resources for slow UCC. - * - * uccs - (In) pointer to the slow UCC structure. - */ -void ucc_slow_free(struct ucc_slow_private * uccs); - -/* ucc_slow_enable - * Enables a fast UCC port. - * This routine enables Tx and/or Rx through the General UCC Mode Register. - * - * uccs - (In) pointer to the slow UCC structure. - * mode - (In) TX, RX, or both. - */ -void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode); - -/* ucc_slow_disable - * Disables a fast UCC port. - * This routine disables Tx and/or Rx through the General UCC Mode Register. - * - * uccs - (In) pointer to the slow UCC structure. - * mode - (In) TX, RX, or both. - */ -void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode); - -/* ucc_slow_poll_transmitter_now - * Immediately forces a poll of the transmitter for data to be sent. - * Typically, the hardware performs a periodic poll for data that the - * transmit routine has set up to be transmitted. In cases where - * this polling cycle is not soon enough, this optional routine can - * be invoked to force a poll right away, instead. Proper use for - * each transmission for which this functionality is desired is to - * call the transmit routine and then this routine right after. - * - * uccs - (In) pointer to the slow UCC structure. - */ -void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs); - -/* ucc_slow_graceful_stop_tx - * Smoothly stops transmission on a specified slow UCC. - * - * uccs - (In) pointer to the slow UCC structure. - */ -void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs); - -/* ucc_slow_stop_tx - * Stops transmission on a specified slow UCC. - * - * uccs - (In) pointer to the slow UCC structure. - */ -void ucc_slow_stop_tx(struct ucc_slow_private * uccs); - -/* ucc_slow_restart_tx - * Restarts transmitting on a specified slow UCC. - * - * uccs - (In) pointer to the slow UCC structure. - */ -void ucc_slow_restart_tx(struct ucc_slow_private *uccs); - -u32 ucc_slow_get_qe_cr_subblock(int uccs_num); - -#endif /* __UCC_SLOW_H__ */ diff --git a/include/asm-powerpc/ucontext.h b/include/asm-powerpc/ucontext.h deleted file mode 100644 index d9a4ddf0cc86..000000000000 --- a/include/asm-powerpc/ucontext.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef _ASM_POWERPC_UCONTEXT_H -#define _ASM_POWERPC_UCONTEXT_H - -#ifdef __powerpc64__ -#include -#else -#include -#endif -#include - -#ifndef __powerpc64__ -struct mcontext { - elf_gregset_t mc_gregs; - elf_fpregset_t mc_fregs; - unsigned long mc_pad[2]; - elf_vrregset_t mc_vregs __attribute__((__aligned__(16))); -}; -#endif - -struct ucontext { - unsigned long uc_flags; - struct ucontext __user *uc_link; - stack_t uc_stack; -#ifndef __powerpc64__ - int uc_pad[7]; - struct mcontext __user *uc_regs;/* points to uc_mcontext field */ -#endif - sigset_t uc_sigmask; - /* glibc has 1024-bit signal masks, ours are 64-bit */ -#ifdef __powerpc64__ - sigset_t __unused[15]; /* Allow for uc_sigmask growth */ - struct sigcontext uc_mcontext; /* last for extensibility */ -#else - int uc_maskext[30]; - int uc_pad2[3]; - struct mcontext uc_mcontext; -#endif -}; - -#endif /* _ASM_POWERPC_UCONTEXT_H */ diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h deleted file mode 100644 index 6418ceea44b7..000000000000 --- a/include/asm-powerpc/udbg.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * (c) 2001, 2006 IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_POWERPC_UDBG_H -#define _ASM_POWERPC_UDBG_H -#ifdef __KERNEL__ - -#include -#include - -extern void (*udbg_putc)(char c); -extern int (*udbg_getc)(void); -extern int (*udbg_getc_poll)(void); - -extern void udbg_puts(const char *s); -extern int udbg_write(const char *s, int n); -extern int udbg_read(char *buf, int buflen); - -extern void register_early_udbg_console(void); -extern void udbg_printf(const char *fmt, ...) - __attribute__ ((format (printf, 1, 2))); -extern void udbg_progress(char *s, unsigned short hex); - -extern void udbg_init_uart(void __iomem *comport, unsigned int speed, - unsigned int clock); -extern unsigned int udbg_probe_uart_speed(void __iomem *comport, - unsigned int clock); - -struct device_node; -extern void udbg_scc_init(int force_scc); -extern int udbg_adb_init(int force_btext); -extern void udbg_adb_init_early(void); - -extern void __init udbg_early_init(void); -extern void __init udbg_init_debug_lpar(void); -extern void __init udbg_init_pmac_realmode(void); -extern void __init udbg_init_maple_realmode(void); -extern void __init udbg_init_pas_realmode(void); -extern void __init udbg_init_iseries(void); -extern void __init udbg_init_rtas_panel(void); -extern void __init udbg_init_rtas_console(void); -extern void __init udbg_init_debug_beat(void); -extern void __init udbg_init_btext(void); -extern void __init udbg_init_44x_as1(void); -extern void __init udbg_init_40x_realmode(void); -extern void __init udbg_init_cpm(void); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_UDBG_H */ diff --git a/include/asm-powerpc/uic.h b/include/asm-powerpc/uic.h deleted file mode 100644 index 970eb7e2186a..000000000000 --- a/include/asm-powerpc/uic.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * include/asm-powerpc/uic.h - * - * IBM PPC4xx UIC external definitions and structure. - * - * Maintainer: David Gibson - * Copyright 2007 IBM Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _ASM_POWERPC_UIC_H -#define _ASM_POWERPC_UIC_H - -#ifdef __KERNEL__ - -extern void __init uic_init_tree(void); -extern unsigned int uic_get_irq(void); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_UIC_H */ diff --git a/include/asm-powerpc/unaligned.h b/include/asm-powerpc/unaligned.h deleted file mode 100644 index 5f1b1e3c2137..000000000000 --- a/include/asm-powerpc/unaligned.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _ASM_POWERPC_UNALIGNED_H -#define _ASM_POWERPC_UNALIGNED_H - -#ifdef __KERNEL__ - -/* - * The PowerPC can do unaligned accesses itself in big endian mode. - */ -#include -#include - -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_UNALIGNED_H */ diff --git a/include/asm-powerpc/uninorth.h b/include/asm-powerpc/uninorth.h deleted file mode 100644 index f737732c3861..000000000000 --- a/include/asm-powerpc/uninorth.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * uninorth.h: definitions for using the "UniNorth" host bridge chip - * from Apple. This chip is used on "Core99" machines - * This also includes U2 used on more recent MacRISC2/3 - * machines and U3 (G5) - * - */ -#ifdef __KERNEL__ -#ifndef __ASM_UNINORTH_H__ -#define __ASM_UNINORTH_H__ - -/* - * Uni-N and U3 config space reg. definitions - * - * (Little endian) - */ - -/* Address ranges selection. This one should work with Bandit too */ -/* Not U3 */ -#define UNI_N_ADDR_SELECT 0x48 -#define UNI_N_ADDR_COARSE_MASK 0xffff0000 /* 256Mb regions at *0000000 */ -#define UNI_N_ADDR_FINE_MASK 0x0000ffff /* 16Mb regions at f*000000 */ - -/* AGP registers */ -/* Not U3 */ -#define UNI_N_CFG_GART_BASE 0x8c -#define UNI_N_CFG_AGP_BASE 0x90 -#define UNI_N_CFG_GART_CTRL 0x94 -#define UNI_N_CFG_INTERNAL_STATUS 0x98 -#define UNI_N_CFG_GART_DUMMY_PAGE 0xa4 - -/* UNI_N_CFG_GART_CTRL bits definitions */ -#define UNI_N_CFG_GART_INVAL 0x00000001 -#define UNI_N_CFG_GART_ENABLE 0x00000100 -#define UNI_N_CFG_GART_2xRESET 0x00010000 -#define UNI_N_CFG_GART_DISSBADET 0x00020000 -/* The following seems to only be used only on U3 */ -#define U3_N_CFG_GART_SYNCMODE 0x00040000 -#define U3_N_CFG_GART_PERFRD 0x00080000 -#define U3_N_CFG_GART_B2BGNT 0x00200000 -#define U3_N_CFG_GART_FASTDDR 0x00400000 - -/* My understanding of UniNorth AGP as of UniNorth rev 1.0x, - * revision 1.5 (x4 AGP) may need further changes. - * - * AGP_BASE register contains the base address of the AGP aperture on - * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x, - * even if decoding of this address range is enabled in the address select - * register. Apparently, the only supported bases are 256Mb multiples - * (high 4 bits of that register). - * - * GART_BASE register appear to contain the physical address of the GART - * in system memory in the high address bits (page aligned), and the - * GART size in the low order bits (number of GART pages) - * - * The GART format itself is one 32bits word per physical memory page. - * This word contains, in little-endian format (!!!), the physical address - * of the page in the high bits, and what appears to be an "enable" bit - * in the LSB bit (0) that must be set to 1 when the entry is valid. - * - * Obviously, the GART is not cache coherent and so any change to it - * must be flushed to memory (or maybe just make the GART space non - * cachable). AGP memory itself doens't seem to be cache coherent neither. - * - * In order to invalidate the GART (which is probably necessary to inval - * the bridge internal TLBs), the following sequence has to be written, - * in order, to the GART_CTRL register: - * - * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL - * UNI_N_CFG_GART_ENABLE - * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET - * UNI_N_CFG_GART_ENABLE - * - * As far as AGP "features" are concerned, it looks like fast write may - * not be supported but this has to be confirmed. - * - * Turning on AGP seem to require a double invalidate operation, one before - * setting the AGP command register, on after. - * - * Turning off AGP seems to require the following sequence: first wait - * for the AGP to be idle by reading the internal status register, then - * write in that order to the GART_CTRL register: - * - * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL - * 0 - * UNI_N_CFG_GART_2xRESET - * 0 - */ - -/* - * Uni-N memory mapped reg. definitions - * - * Those registers are Big-Endian !! - * - * Their meaning come from either Darwin and/or from experiments I made with - * the bootrom, I'm not sure about their exact meaning yet - * - */ - -/* Version of the UniNorth chip */ -#define UNI_N_VERSION 0x0000 /* Known versions: 3,7 and 8 */ - -#define UNI_N_VERSION_107 0x0003 /* 1.0.7 */ -#define UNI_N_VERSION_10A 0x0007 /* 1.0.10 */ -#define UNI_N_VERSION_150 0x0011 /* 1.5 */ -#define UNI_N_VERSION_200 0x0024 /* 2.0 */ -#define UNI_N_VERSION_PANGEA 0x00C0 /* Integrated U1 + K */ -#define UNI_N_VERSION_INTREPID 0x00D2 /* Integrated U2 + K */ -#define UNI_N_VERSION_300 0x0030 /* 3.0 (U3 on G5) */ - -/* This register is used to enable/disable various clocks */ -#define UNI_N_CLOCK_CNTL 0x0020 -#define UNI_N_CLOCK_CNTL_PCI 0x00000001 /* PCI2 clock control */ -#define UNI_N_CLOCK_CNTL_GMAC 0x00000002 /* GMAC clock control */ -#define UNI_N_CLOCK_CNTL_FW 0x00000004 /* FireWire clock control */ -#define UNI_N_CLOCK_CNTL_ATA100 0x00000010 /* ATA-100 clock control (U2) */ - -/* Power Management control */ -#define UNI_N_POWER_MGT 0x0030 -#define UNI_N_POWER_MGT_NORMAL 0x00 -#define UNI_N_POWER_MGT_IDLE2 0x01 -#define UNI_N_POWER_MGT_SLEEP 0x02 - -/* This register is configured by Darwin depending on the UniN - * revision - */ -#define UNI_N_ARB_CTRL 0x0040 -#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15 -#define UNI_N_ARB_CTRL_QACK_DELAY_MASK 0x0e1f8000 -#define UNI_N_ARB_CTRL_QACK_DELAY 0x30 -#define UNI_N_ARB_CTRL_QACK_DELAY105 0x00 - -/* This one _might_ return the CPU number of the CPU reading it; - * the bootROM decides whether to boot or to sleep/spinloop depending - * on this register beeing 0 or not - */ -#define UNI_N_CPU_NUMBER 0x0050 - -/* This register appear to be read by the bootROM to decide what - * to do on a non-recoverable reset (powerup or wakeup) - */ -#define UNI_N_HWINIT_STATE 0x0070 -#define UNI_N_HWINIT_STATE_SLEEPING 0x01 -#define UNI_N_HWINIT_STATE_RUNNING 0x02 -/* This last bit appear to be used by the bootROM to know the second - * CPU has started and will enter it's sleep loop with IP=0 - */ -#define UNI_N_HWINIT_STATE_CPU1_FLAG 0x10000000 - -/* This register controls AACK delay, which is set when 2004 iBook/PowerBook - * is in low speed mode. - */ -#define UNI_N_AACK_DELAY 0x0100 -#define UNI_N_AACK_DELAY_ENABLE 0x00000001 - -/* Clock status for Intrepid */ -#define UNI_N_CLOCK_STOP_STATUS0 0x0150 -#define UNI_N_CLOCK_STOPPED_EXTAGP 0x00200000 -#define UNI_N_CLOCK_STOPPED_AGPDEL 0x00100000 -#define UNI_N_CLOCK_STOPPED_I2S0_45_49 0x00080000 -#define UNI_N_CLOCK_STOPPED_I2S0_18 0x00040000 -#define UNI_N_CLOCK_STOPPED_I2S1_45_49 0x00020000 -#define UNI_N_CLOCK_STOPPED_I2S1_18 0x00010000 -#define UNI_N_CLOCK_STOPPED_TIMER 0x00008000 -#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18 0x00004000 -#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32 0x00002000 -#define UNI_N_CLOCK_STOPPED_SCC_VIA32 0x00001000 -#define UNI_N_CLOCK_STOPPED_SCC_SLOT0 0x00000800 -#define UNI_N_CLOCK_STOPPED_SCC_SLOT1 0x00000400 -#define UNI_N_CLOCK_STOPPED_SCC_SLOT2 0x00000200 -#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO 0x00000100 -#define UNI_N_CLOCK_STOPPED_VEO0 0x00000080 -#define UNI_N_CLOCK_STOPPED_VEO1 0x00000040 -#define UNI_N_CLOCK_STOPPED_USB0 0x00000020 -#define UNI_N_CLOCK_STOPPED_USB1 0x00000010 -#define UNI_N_CLOCK_STOPPED_USB2 0x00000008 -#define UNI_N_CLOCK_STOPPED_32 0x00000004 -#define UNI_N_CLOCK_STOPPED_45 0x00000002 -#define UNI_N_CLOCK_STOPPED_49 0x00000001 - -#define UNI_N_CLOCK_STOP_STATUS1 0x0160 -#define UNI_N_CLOCK_STOPPED_PLL4REF 0x00080000 -#define UNI_N_CLOCK_STOPPED_CPUDEL 0x00040000 -#define UNI_N_CLOCK_STOPPED_CPU 0x00020000 -#define UNI_N_CLOCK_STOPPED_BUF_REFCKO 0x00010000 -#define UNI_N_CLOCK_STOPPED_PCI2 0x00008000 -#define UNI_N_CLOCK_STOPPED_FW 0x00004000 -#define UNI_N_CLOCK_STOPPED_GB 0x00002000 -#define UNI_N_CLOCK_STOPPED_ATA66 0x00001000 -#define UNI_N_CLOCK_STOPPED_ATA100 0x00000800 -#define UNI_N_CLOCK_STOPPED_MAX 0x00000400 -#define UNI_N_CLOCK_STOPPED_PCI1 0x00000200 -#define UNI_N_CLOCK_STOPPED_KLPCI 0x00000100 -#define UNI_N_CLOCK_STOPPED_USB0PCI 0x00000080 -#define UNI_N_CLOCK_STOPPED_USB1PCI 0x00000040 -#define UNI_N_CLOCK_STOPPED_USB2PCI 0x00000020 -#define UNI_N_CLOCK_STOPPED_7PCI1 0x00000008 -#define UNI_N_CLOCK_STOPPED_AGP 0x00000004 -#define UNI_N_CLOCK_STOPPED_PCI0 0x00000002 -#define UNI_N_CLOCK_STOPPED_18 0x00000001 - -/* Intrepid registe to OF do-platform-clockspreading */ -#define UNI_N_CLOCK_SPREADING 0x190 - -/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */ - - -/* - * U3 specific registers - */ - - -/* U3 Toggle */ -#define U3_TOGGLE_REG 0x00e0 -#define U3_PMC_START_STOP 0x0001 -#define U3_MPIC_RESET 0x0002 -#define U3_MPIC_OUTPUT_ENABLE 0x0004 - -/* U3 API PHY Config 1 */ -#define U3_API_PHY_CONFIG_1 0x23030 - -/* U3 HyperTransport registers */ -#define U3_HT_CONFIG_BASE 0x70000 -#define U3_HT_LINK_COMMAND 0x100 -#define U3_HT_LINK_CONFIG 0x110 -#define U3_HT_LINK_FREQ 0x120 - -#endif /* __ASM_UNINORTH_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h deleted file mode 100644 index e07d0c76ed77..000000000000 --- a/include/asm-powerpc/unistd.h +++ /dev/null @@ -1,398 +0,0 @@ -#ifndef _ASM_POWERPC_UNISTD_H_ -#define _ASM_POWERPC_UNISTD_H_ - -/* - * This file contains the system call numbers. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_vm86 113 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_query_module 166 -#define __NR_poll 167 -#define __NR_nfsservctl 168 -#define __NR_setresgid 169 -#define __NR_getresgid 170 -#define __NR_prctl 171 -#define __NR_rt_sigreturn 172 -#define __NR_rt_sigaction 173 -#define __NR_rt_sigprocmask 174 -#define __NR_rt_sigpending 175 -#define __NR_rt_sigtimedwait 176 -#define __NR_rt_sigqueueinfo 177 -#define __NR_rt_sigsuspend 178 -#define __NR_pread64 179 -#define __NR_pwrite64 180 -#define __NR_chown 181 -#define __NR_getcwd 182 -#define __NR_capget 183 -#define __NR_capset 184 -#define __NR_sigaltstack 185 -#define __NR_sendfile 186 -#define __NR_getpmsg 187 /* some people actually want streams */ -#define __NR_putpmsg 188 /* some people actually want streams */ -#define __NR_vfork 189 -#define __NR_ugetrlimit 190 /* SuS compliant getrlimit */ -#define __NR_readahead 191 -#ifndef __powerpc64__ /* these are 32-bit only */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#endif -#define __NR_pciconfig_read 198 -#define __NR_pciconfig_write 199 -#define __NR_pciconfig_iobase 200 -#define __NR_multiplexer 201 -#define __NR_getdents64 202 -#define __NR_pivot_root 203 -#ifndef __powerpc64__ -#define __NR_fcntl64 204 -#endif -#define __NR_madvise 205 -#define __NR_mincore 206 -#define __NR_gettid 207 -#define __NR_tkill 208 -#define __NR_setxattr 209 -#define __NR_lsetxattr 210 -#define __NR_fsetxattr 211 -#define __NR_getxattr 212 -#define __NR_lgetxattr 213 -#define __NR_fgetxattr 214 -#define __NR_listxattr 215 -#define __NR_llistxattr 216 -#define __NR_flistxattr 217 -#define __NR_removexattr 218 -#define __NR_lremovexattr 219 -#define __NR_fremovexattr 220 -#define __NR_futex 221 -#define __NR_sched_setaffinity 222 -#define __NR_sched_getaffinity 223 -/* 224 currently unused */ -#define __NR_tuxcall 225 -#ifndef __powerpc64__ -#define __NR_sendfile64 226 -#endif -#define __NR_io_setup 227 -#define __NR_io_destroy 228 -#define __NR_io_getevents 229 -#define __NR_io_submit 230 -#define __NR_io_cancel 231 -#define __NR_set_tid_address 232 -#define __NR_fadvise64 233 -#define __NR_exit_group 234 -#define __NR_lookup_dcookie 235 -#define __NR_epoll_create 236 -#define __NR_epoll_ctl 237 -#define __NR_epoll_wait 238 -#define __NR_remap_file_pages 239 -#define __NR_timer_create 240 -#define __NR_timer_settime 241 -#define __NR_timer_gettime 242 -#define __NR_timer_getoverrun 243 -#define __NR_timer_delete 244 -#define __NR_clock_settime 245 -#define __NR_clock_gettime 246 -#define __NR_clock_getres 247 -#define __NR_clock_nanosleep 248 -#define __NR_swapcontext 249 -#define __NR_tgkill 250 -#define __NR_utimes 251 -#define __NR_statfs64 252 -#define __NR_fstatfs64 253 -#ifndef __powerpc64__ -#define __NR_fadvise64_64 254 -#endif -#define __NR_rtas 255 -#define __NR_sys_debug_setcontext 256 -/* Number 257 is reserved for vserver */ -#define __NR_migrate_pages 258 -#define __NR_mbind 259 -#define __NR_get_mempolicy 260 -#define __NR_set_mempolicy 261 -#define __NR_mq_open 262 -#define __NR_mq_unlink 263 -#define __NR_mq_timedsend 264 -#define __NR_mq_timedreceive 265 -#define __NR_mq_notify 266 -#define __NR_mq_getsetattr 267 -#define __NR_kexec_load 268 -#define __NR_add_key 269 -#define __NR_request_key 270 -#define __NR_keyctl 271 -#define __NR_waitid 272 -#define __NR_ioprio_set 273 -#define __NR_ioprio_get 274 -#define __NR_inotify_init 275 -#define __NR_inotify_add_watch 276 -#define __NR_inotify_rm_watch 277 -#define __NR_spu_run 278 -#define __NR_spu_create 279 -#define __NR_pselect6 280 -#define __NR_ppoll 281 -#define __NR_unshare 282 -#define __NR_splice 283 -#define __NR_tee 284 -#define __NR_vmsplice 285 -#define __NR_openat 286 -#define __NR_mkdirat 287 -#define __NR_mknodat 288 -#define __NR_fchownat 289 -#define __NR_futimesat 290 -#ifdef __powerpc64__ -#define __NR_newfstatat 291 -#else -#define __NR_fstatat64 291 -#endif -#define __NR_unlinkat 292 -#define __NR_renameat 293 -#define __NR_linkat 294 -#define __NR_symlinkat 295 -#define __NR_readlinkat 296 -#define __NR_fchmodat 297 -#define __NR_faccessat 298 -#define __NR_get_robust_list 299 -#define __NR_set_robust_list 300 -#define __NR_move_pages 301 -#define __NR_getcpu 302 -#define __NR_epoll_pwait 303 -#define __NR_utimensat 304 -#define __NR_signalfd 305 -#define __NR_timerfd_create 306 -#define __NR_eventfd 307 -#define __NR_sync_file_range2 308 -#define __NR_fallocate 309 -#define __NR_subpage_prot 310 -#define __NR_timerfd_settime 311 -#define __NR_timerfd_gettime 312 -#define __NR_signalfd4 313 -#define __NR_eventfd2 314 -#define __NR_epoll_create1 315 -#define __NR_dup3 316 -#define __NR_pipe2 317 -#define __NR_inotify_init1 318 - -#ifdef __KERNEL__ - -#define __NR_syscalls 319 - -#define __NR__exit __NR_exit -#define NR_syscalls __NR_syscalls - -#ifndef __ASSEMBLY__ - -#include -#include -#include - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND -#ifdef CONFIG_PPC32 -#define __ARCH_WANT_OLD_STAT -#endif -#ifdef CONFIG_PPC64 -#define __ARCH_WANT_COMPAT_SYS_TIME -#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND -#define __ARCH_WANT_SYS_NEWFSTATAT -#endif - -/* - * "Conditional" syscalls - */ -#define cond_syscall(x) \ - asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall"))) - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_UNISTD_H_ */ diff --git a/include/asm-powerpc/user.h b/include/asm-powerpc/user.h deleted file mode 100644 index 3fd4545dd74e..000000000000 --- a/include/asm-powerpc/user.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef _ASM_POWERPC_USER_H -#define _ASM_POWERPC_USER_H - -#include -#include - -/* - * Adapted from - * - * Core file format: The core file is written in such a way that gdb - * can understand it and provide useful information to the user (under - * linux we use the `trad-core' bfd, NOT the osf-core). The file contents - * are as follows: - * - * upage: 1 page consisting of a user struct that tells gdb - * what is present in the file. Directly after this is a - * copy of the task_struct, which is currently not used by gdb, - * but it may come in handy at some point. All of the registers - * are stored as part of the upage. The upage should always be - * only one page long. - * data: The data segment follows next. We use current->end_text to - * current->brk to pick up all of the user variables, plus any memory - * that may have been sbrk'ed. No attempt is made to determine if a - * page is demand-zero or if a page is totally unused, we just cover - * the entire range. All of the addresses are rounded in such a way - * that an integral number of pages is written. - * stack: We need the stack information in order to get a meaningful - * backtrace. We need to write the data from usp to - * current->start_stack, so we round each of these in order to be able - * to write an integer number of pages. - */ -struct user { - struct pt_regs regs; /* entire machine state */ - size_t u_tsize; /* text size (pages) */ - size_t u_dsize; /* data size (pages) */ - size_t u_ssize; /* stack size (pages) */ - unsigned long start_code; /* text starting address */ - unsigned long start_data; /* data starting address */ - unsigned long start_stack; /* stack starting address */ - long int signal; /* signal causing core dump */ - unsigned long u_ar0; /* help gdb find registers */ - unsigned long magic; /* identifies a core file */ - char u_comm[32]; /* user command name */ -}; - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_DATA_START_ADDR (u.start_data) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) -#endif /* _ASM_POWERPC_USER_H */ diff --git a/include/asm-powerpc/vdso.h b/include/asm-powerpc/vdso.h deleted file mode 100644 index 26fc449bd989..000000000000 --- a/include/asm-powerpc/vdso.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef __PPC64_VDSO_H__ -#define __PPC64_VDSO_H__ - -#ifdef __KERNEL__ - -/* Default link addresses for the vDSOs */ -#define VDSO32_LBASE 0x100000 -#define VDSO64_LBASE 0x100000 - -/* Default map addresses */ -#define VDSO32_MBASE VDSO32_LBASE -#define VDSO64_MBASE VDSO64_LBASE - -#define VDSO_VERSION_STRING LINUX_2.6.15 - -/* Define if 64 bits VDSO has procedure descriptors */ -#undef VDS64_HAS_DESCRIPTORS - -#ifndef __ASSEMBLY__ - -/* Offsets relative to thread->vdso_base */ -extern unsigned long vdso64_rt_sigtramp; -extern unsigned long vdso32_sigtramp; -extern unsigned long vdso32_rt_sigtramp; - -#else /* __ASSEMBLY__ */ - -#ifdef __VDSO64__ -#ifdef VDS64_HAS_DESCRIPTORS -#define V_FUNCTION_BEGIN(name) \ - .globl name; \ - .section ".opd","a"; \ - .align 3; \ - name: \ - .quad .name,.TOC.@tocbase,0; \ - .previous; \ - .globl .name; \ - .type .name,@function; \ - .name: \ - -#define V_FUNCTION_END(name) \ - .size .name,.-.name; - -#define V_LOCAL_FUNC(name) (.name) - -#else /* VDS64_HAS_DESCRIPTORS */ - -#define V_FUNCTION_BEGIN(name) \ - .globl name; \ - name: \ - -#define V_FUNCTION_END(name) \ - .size name,.-name; - -#define V_LOCAL_FUNC(name) (name) - -#endif /* VDS64_HAS_DESCRIPTORS */ -#endif /* __VDSO64__ */ - -#ifdef __VDSO32__ - -#define V_FUNCTION_BEGIN(name) \ - .globl name; \ - .type name,@function; \ - name: \ - -#define V_FUNCTION_END(name) \ - .size name,.-name; - -#define V_LOCAL_FUNC(name) (name) - -#endif /* __VDSO32__ */ - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* __PPC64_VDSO_H__ */ diff --git a/include/asm-powerpc/vdso_datapage.h b/include/asm-powerpc/vdso_datapage.h deleted file mode 100644 index f01393224b52..000000000000 --- a/include/asm-powerpc/vdso_datapage.h +++ /dev/null @@ -1,121 +0,0 @@ -#ifndef _VDSO_DATAPAGE_H -#define _VDSO_DATAPAGE_H -#ifdef __KERNEL__ - -/* - * Copyright (C) 2002 Peter Bergner , IBM - * Copyright (C) 2005 Benjamin Herrenschmidy , - * IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - -/* - * Note about this structure: - * - * This structure was historically called systemcfg and exposed to - * userland via /proc/ppc64/systemcfg. Unfortunately, this became an - * ABI issue as some proprietary software started relying on being able - * to mmap() it, thus we have to keep the base layout at least for a - * few kernel versions. - * - * However, since ppc32 doesn't suffer from this backward handicap, - * a simpler version of the data structure is used there with only the - * fields actually used by the vDSO. - * - */ - -/* - * If the major version changes we are incompatible. - * Minor version changes are a hint. - */ -#define SYSTEMCFG_MAJOR 1 -#define SYSTEMCFG_MINOR 1 - -#ifndef __ASSEMBLY__ - -#include - -#define SYSCALL_MAP_SIZE ((__NR_syscalls + 31) / 32) - -/* - * So here is the ppc64 backward compatible version - */ - -#ifdef CONFIG_PPC64 - -struct vdso_data { - __u8 eye_catcher[16]; /* Eyecatcher: SYSTEMCFG:PPC64 0x00 */ - struct { /* Systemcfg version numbers */ - __u32 major; /* Major number 0x10 */ - __u32 minor; /* Minor number 0x14 */ - } version; - - /* Note about the platform flags: it now only contains the lpar - * bit. The actual platform number is dead and burried - */ - __u32 platform; /* Platform flags 0x18 */ - __u32 processor; /* Processor type 0x1C */ - __u64 processorCount; /* # of physical processors 0x20 */ - __u64 physicalMemorySize; /* Size of real memory(B) 0x28 */ - __u64 tb_orig_stamp; /* Timebase at boot 0x30 */ - __u64 tb_ticks_per_sec; /* Timebase tics / sec 0x38 */ - __u64 tb_to_xs; /* Inverse of TB to 2^20 0x40 */ - __u64 stamp_xsec; /* 0x48 */ - __u64 tb_update_count; /* Timebase atomicity ctr 0x50 */ - __u32 tz_minuteswest; /* Minutes west of Greenwich 0x58 */ - __u32 tz_dsttime; /* Type of dst correction 0x5C */ - __u32 dcache_size; /* L1 d-cache size 0x60 */ - __u32 dcache_line_size; /* L1 d-cache line size 0x64 */ - __u32 icache_size; /* L1 i-cache size 0x68 */ - __u32 icache_line_size; /* L1 i-cache line size 0x6C */ - - /* those additional ones don't have to be located anywhere - * special as they were not part of the original systemcfg - */ - __u32 dcache_block_size; /* L1 d-cache block size */ - __u32 icache_block_size; /* L1 i-cache block size */ - __u32 dcache_log_block_size; /* L1 d-cache log block size */ - __u32 icache_log_block_size; /* L1 i-cache log block size */ - __s32 wtom_clock_sec; /* Wall to monotonic clock */ - __s32 wtom_clock_nsec; - __u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls */ - __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ -}; - -#else /* CONFIG_PPC64 */ - -/* - * And here is the simpler 32 bits version - */ -struct vdso_data { - __u64 tb_orig_stamp; /* Timebase at boot 0x30 */ - __u64 tb_ticks_per_sec; /* Timebase tics / sec 0x38 */ - __u64 tb_to_xs; /* Inverse of TB to 2^20 0x40 */ - __u64 stamp_xsec; /* 0x48 */ - __u32 tb_update_count; /* Timebase atomicity ctr 0x50 */ - __u32 tz_minuteswest; /* Minutes west of Greenwich 0x58 */ - __u32 tz_dsttime; /* Type of dst correction 0x5C */ - __s32 wtom_clock_sec; /* Wall to monotonic clock */ - __s32 wtom_clock_nsec; - __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ - __u32 dcache_block_size; /* L1 d-cache block size */ - __u32 icache_block_size; /* L1 i-cache block size */ - __u32 dcache_log_block_size; /* L1 d-cache log block size */ - __u32 icache_log_block_size; /* L1 i-cache log block size */ -}; - -#endif /* CONFIG_PPC64 */ - -#ifdef __KERNEL__ -extern struct vdso_data *vdso_data; -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ -#endif /* _SYSTEMCFG_H */ diff --git a/include/asm-powerpc/vga.h b/include/asm-powerpc/vga.h deleted file mode 100644 index a2eac409c1ec..000000000000 --- a/include/asm-powerpc/vga.h +++ /dev/null @@ -1,53 +0,0 @@ -#ifndef _ASM_POWERPC_VGA_H_ -#define _ASM_POWERPC_VGA_H_ - -#ifdef __KERNEL__ - -/* - * Access to VGA videoram - * - * (c) 1998 Martin Mares - */ - - -#include - - -#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE) - -#define VT_BUF_HAVE_RW -/* - * These are only needed for supporting VGA or MDA text mode, which use little - * endian byte ordering. - * In other cases, we can optimize by using native byte ordering and - * has already done the right job for us. - */ - -static inline void scr_writew(u16 val, volatile u16 *addr) -{ - st_le16(addr, val); -} - -static inline u16 scr_readw(volatile const u16 *addr) -{ - return ld_le16(addr); -} - -#define VT_BUF_HAVE_MEMCPYW -#define scr_memcpyw memcpy - -#endif /* !CONFIG_VGA_CONSOLE && !CONFIG_MDA_CONSOLE */ - -extern unsigned long vgacon_remap_base; - -#ifdef __powerpc64__ -#define VGA_MAP_MEM(x,s) ((unsigned long) ioremap((x), s)) -#else -#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base) -#endif - -#define vga_readb(x) (*(x)) -#define vga_writeb(x,y) (*(y) = (x)) - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_VGA_H_ */ diff --git a/include/asm-powerpc/vio.h b/include/asm-powerpc/vio.h deleted file mode 100644 index 0a290a195946..000000000000 --- a/include/asm-powerpc/vio.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - * IBM PowerPC Virtual I/O Infrastructure Support. - * - * Copyright (c) 2003 IBM Corp. - * Dave Engebretsen engebret@us.ibm.com - * Santiago Leon santil@us.ibm.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_POWERPC_VIO_H -#define _ASM_POWERPC_VIO_H -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -#include -#include - -/* - * Architecture-specific constants for drivers to - * extract attributes of the device using vio_get_attribute() - */ -#define VETH_MAC_ADDR "local-mac-address" -#define VETH_MCAST_FILTER_SIZE "ibm,mac-address-filters" - -/* End architecture-specific constants */ - -#define h_vio_signal(ua, mode) \ - plpar_hcall_norets(H_VIO_SIGNAL, ua, mode) - -#define VIO_IRQ_DISABLE 0UL -#define VIO_IRQ_ENABLE 1UL - -/* - * VIO CMO minimum entitlement for all devices and spare entitlement - */ -#define VIO_CMO_MIN_ENT 1562624 - -struct iommu_table; - -/** - * vio_dev - This structure is used to describe virtual I/O devices. - * - * @desired: set from return of driver's get_desired_dma() function - * @entitled: bytes of IO data that has been reserved for this device. - * @allocated: bytes of IO data currently in use by the device. - * @allocs_failed: number of DMA failures due to insufficient entitlement. - */ -struct vio_dev { - const char *name; - const char *type; - uint32_t unit_address; - unsigned int irq; - struct { - size_t desired; - size_t entitled; - size_t allocated; - atomic_t allocs_failed; - } cmo; - struct device dev; -}; - -struct vio_driver { - const struct vio_device_id *id_table; - int (*probe)(struct vio_dev *dev, const struct vio_device_id *id); - int (*remove)(struct vio_dev *dev); - /* A driver must have a get_desired_dma() function to - * be loaded in a CMO environment if it uses DMA. - */ - unsigned long (*get_desired_dma)(struct vio_dev *dev); - struct device_driver driver; -}; - -extern int vio_register_driver(struct vio_driver *drv); -extern void vio_unregister_driver(struct vio_driver *drv); - -extern int vio_cmo_entitlement_update(size_t); -extern void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired); - -extern void __devinit vio_unregister_device(struct vio_dev *dev); - -struct device_node; - -extern struct vio_dev *vio_register_device_node( - struct device_node *node_vdev); -extern const void *vio_get_attribute(struct vio_dev *vdev, char *which, - int *length); -#ifdef CONFIG_PPC_PSERIES -extern struct vio_dev *vio_find_node(struct device_node *vnode); -extern int vio_enable_interrupts(struct vio_dev *dev); -extern int vio_disable_interrupts(struct vio_dev *dev); -#else -static inline int vio_enable_interrupts(struct vio_dev *dev) -{ - return 0; -} -#endif - -static inline struct vio_driver *to_vio_driver(struct device_driver *drv) -{ - return container_of(drv, struct vio_driver, driver); -} - -static inline struct vio_dev *to_vio_dev(struct device *dev) -{ - return container_of(dev, struct vio_dev, dev); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_VIO_H */ diff --git a/include/asm-powerpc/xilinx_intc.h b/include/asm-powerpc/xilinx_intc.h deleted file mode 100644 index 343612f8fece..000000000000 --- a/include/asm-powerpc/xilinx_intc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Xilinx intc external definitions - * - * Copyright 2007 Secret Lab Technologies Ltd. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _ASM_POWERPC_XILINX_INTC_H -#define _ASM_POWERPC_XILINX_INTC_H - -#ifdef __KERNEL__ - -extern void __init xilinx_intc_init_tree(void); -extern unsigned int xilinx_intc_get_irq(void); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_XILINX_INTC_H */ diff --git a/include/asm-powerpc/xmon.h b/include/asm-powerpc/xmon.h deleted file mode 100644 index 5eb8e599e5cc..000000000000 --- a/include/asm-powerpc/xmon.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef __ASM_POWERPC_XMON_H -#define __ASM_POWERPC_XMON_H - -/* - * Copyrignt (C) 2006 IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifdef __KERNEL__ - -#include - -#ifdef CONFIG_XMON -extern void xmon_setup(void); -extern void xmon_register_spus(struct list_head *list); -struct pt_regs; -extern int xmon(struct pt_regs *excp); -extern irqreturn_t xmon_irq(int, void *); -#else -static inline void xmon_setup(void) { }; -static inline void xmon_register_spus(struct list_head *list) { }; -#endif - -#if defined(CONFIG_XMON) && defined(CONFIG_SMP) -extern int cpus_are_in_xmon(void); -#endif - -#endif /* __KERNEL __ */ -#endif /* __ASM_POWERPC_XMON_H */ diff --git a/include/asm-powerpc/xor.h b/include/asm-powerpc/xor.h deleted file mode 100644 index c82eb12a5b18..000000000000 --- a/include/asm-powerpc/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include -- cgit v1.2.3 From 93d0ec851820688ef5b21a84e7460d3cf405f5c5 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 2 Aug 2008 08:00:48 -0400 Subject: remove locking around tcpSesAllocCount atomic variable The global tcpSesAllocCount variable is an atomic already and doesn't really need the extra locking around it. Remove the locking and just use the atomic_inc_return and atomic_dec_return functions to make sure we access it correctly. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index b51d5777cde6..34a1fc9dabf5 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -351,11 +351,9 @@ cifs_demultiplex_thread(struct TCP_Server_Info *server) current->flags |= PF_MEMALLOC; cFYI(1, ("Demultiplex PID: %d", task_pid_nr(current))); - write_lock(&GlobalSMBSeslock); - atomic_inc(&tcpSesAllocCount); - length = tcpSesAllocCount.counter; - write_unlock(&GlobalSMBSeslock); - if (length > 1) + + length = atomic_inc_return(&tcpSesAllocCount); + if (length > 1) mempool_resize(cifs_req_poolp, length + cifs_min_rcv, GFP_KERNEL); @@ -745,14 +743,11 @@ multi_t2_fnd: coming home not much else we can do but free the memory */ } - write_lock(&GlobalSMBSeslock); - atomic_dec(&tcpSesAllocCount); - length = tcpSesAllocCount.counter; - /* last chance to mark ses pointers invalid if there are any pointing to this (e.g if a crazy root user tried to kill cifsd kernel thread explicitly this might happen) */ + write_lock(&GlobalSMBSeslock); list_for_each(tmp, &GlobalSMBSessionList) { ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList); @@ -763,6 +758,8 @@ multi_t2_fnd: kfree(server->hostname); kfree(server); + + length = atomic_dec_return(&tcpSesAllocCount); if (length > 0) mempool_resize(cifs_req_poolp, length + cifs_min_rcv, GFP_KERNEL); -- cgit v1.2.3 From fb61063587982b52304d62cdbb6a0a88d26ae7ef Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Thu, 31 Jul 2008 13:51:42 +1000 Subject: powerpc: Fix compiler warning in arch/powerpc/mm/mem.c Explicitly cast to unsigned long long, rather than u64. Signed-off-by: Tony Breeds Signed-off-by: Paul Mackerras --- arch/powerpc/mm/mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 702691cb9e82..1c93c255873b 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -311,7 +311,7 @@ void __init paging_init(void) #endif /* CONFIG_HIGHMEM */ printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%lx\n", - (u64)top_of_ram, total_ram); + (unsigned long long)top_of_ram, total_ram); printk(KERN_DEBUG "Memory hole size: %ldMB\n", (long int)((top_of_ram - total_ram) >> 20)); memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); -- cgit v1.2.3 From c7c8eede2739289df02a1ab297cc476c6f38dca7 Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Fri, 1 Aug 2008 11:38:39 +1000 Subject: powerpc: Force printing of 'total_memory' to unsigned long long total_memory is a 'phys_addr_t', Which can be either 64 or 32 bits. Force printing as unsigned long long to silence the warning. Signed-off-by: Tony Breeds Signed-off-by: Paul Mackerras --- arch/powerpc/mm/ppc_mmu_32.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index c53145f61942..6aa120813775 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -236,8 +236,8 @@ void __init MMU_init_hw(void) Hash_end = (struct hash_pte *) ((unsigned long)Hash + Hash_size); - printk("Total memory = %ldMB; using %ldkB for hash table (at %p)\n", - total_memory >> 20, Hash_size >> 10, Hash); + printk("Total memory = %lldMB; using %ldkB for hash table (at %p)\n", + (unsigned long long)(total_memory >> 20), Hash_size >> 10, Hash); /* -- cgit v1.2.3 From 9c4cb82515130c62224e23fdf7c13c8f6c59c614 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 2 Aug 2008 02:44:11 +1000 Subject: powerpc: Remove use of CONFIG_PPC_MERGE Now that arch/ppc is gone and CONFIG_PPC_MERGE is always set, remove the dead code associated with !CONFIG_PPC_MERGE from arch/powerpc and include/asm-powerpc. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig.debug | 2 +- arch/powerpc/include/asm/dcr.h | 6 +- arch/powerpc/include/asm/i8259.h | 5 - arch/powerpc/include/asm/ipic.h | 7 - arch/powerpc/include/asm/irq.h | 288 ------------------------------- arch/powerpc/kernel/Makefile | 14 -- arch/powerpc/kernel/cpu_setup_44x.S | 6 - arch/powerpc/kernel/irq.c | 25 +-- arch/powerpc/kernel/process.c | 2 - arch/powerpc/kernel/vdso.c | 2 - arch/powerpc/lib/Makefile | 2 - arch/powerpc/platforms/52xx/Makefile | 4 +- arch/powerpc/platforms/Makefile | 6 - arch/powerpc/platforms/powermac/Makefile | 3 +- arch/powerpc/sysdev/Makefile | 2 - 15 files changed, 6 insertions(+), 368 deletions(-) diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 8c8aadbe9563..4ebc52a19f0a 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -97,7 +97,7 @@ config IRQSTACKS config VIRQ_DEBUG bool "Expose hardware/virtual IRQ mapping via debugfs" - depends on DEBUG_FS && PPC_MERGE + depends on DEBUG_FS help This option will show the mapping relationship between hardware irq numbers and virtual irq numbers. The mapping is exposed via debugfs diff --git a/arch/powerpc/include/asm/dcr.h b/arch/powerpc/include/asm/dcr.h index 53b283050ab3..d13fb68bb5c0 100644 --- a/arch/powerpc/include/asm/dcr.h +++ b/arch/powerpc/include/asm/dcr.h @@ -65,17 +65,13 @@ typedef dcr_host_mmio_t dcr_host_t; #endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */ /* - * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR - * base from the device-tree + * additional helpers to read the DCR * base from the device-tree */ -#ifdef CONFIG_PPC_MERGE struct device_node; extern unsigned int dcr_resource_start(struct device_node *np, unsigned int index); extern unsigned int dcr_resource_len(struct device_node *np, unsigned int index); -#endif /* CONFIG_PPC_MERGE */ - #endif /* CONFIG_PPC_DCR */ #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/i8259.h b/arch/powerpc/include/asm/i8259.h index db1362f8c603..105ade297aad 100644 --- a/arch/powerpc/include/asm/i8259.h +++ b/arch/powerpc/include/asm/i8259.h @@ -4,14 +4,9 @@ #include -#ifdef CONFIG_PPC_MERGE extern void i8259_init(struct device_node *node, unsigned long intack_addr); extern unsigned int i8259_irq(void); extern struct irq_host *i8259_get_host(void); -#else -extern void i8259_init(unsigned long intack_addr, int offset); -extern int i8259_irq(void); -#endif #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_I8259_H */ diff --git a/arch/powerpc/include/asm/ipic.h b/arch/powerpc/include/asm/ipic.h index 4cf35531c0ef..fb59829983b8 100644 --- a/arch/powerpc/include/asm/ipic.h +++ b/arch/powerpc/include/asm/ipic.h @@ -77,15 +77,8 @@ extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq); extern u32 ipic_get_mcp_status(void); extern void ipic_clear_mcp_status(u32 mask); -#ifdef CONFIG_PPC_MERGE extern struct ipic * ipic_init(struct device_node *node, unsigned int flags); extern unsigned int ipic_get_irq(void); -#else -extern void ipic_init(phys_addr_t phys_addr, unsigned int flags, - unsigned int irq_offset, - unsigned char *senses, unsigned int senses_count); -extern int ipic_get_irq(void); -#endif #endif /* __ASM_IPIC_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index 1ef8e304e0ea..a372f76836c2 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -25,8 +25,6 @@ extern atomic_t ppc_n_lost_interrupts; -#ifdef CONFIG_PPC_MERGE - /* This number is used when no interrupt has been assigned */ #define NO_IRQ (0) @@ -326,292 +324,6 @@ static __inline__ int irq_canonicalize(int irq) return irq; } - -#else /* CONFIG_PPC_MERGE */ - -/* This number is used when no interrupt has been assigned */ -#define NO_IRQ (-1) -#define NO_IRQ_IGNORE (-2) - - -/* - * These constants are used for passing information about interrupt - * signal polarity and level/edge sensing to the low-level PIC chip - * drivers. - */ -#define IRQ_SENSE_MASK 0x1 -#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */ -#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */ - -#define IRQ_POLARITY_MASK 0x2 -#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */ -#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */ - - -#if defined(CONFIG_40x) -#include - -#ifndef NR_BOARD_IRQS -#define NR_BOARD_IRQS 0 -#endif - -#ifndef UIC_WIDTH /* Number of interrupts per device */ -#define UIC_WIDTH 32 -#endif - -#ifndef NR_UICS /* number of UIC devices */ -#define NR_UICS 1 -#endif - -#if defined (CONFIG_403) -/* - * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has - * 32 possible interrupts, a majority of which are not implemented on - * all cores. There are six configurable, external interrupt pins and - * there are eight internal interrupts for the on-chip serial port - * (SPU), DMA controller, and JTAG controller. - * - */ - -#define NR_AIC_IRQS 32 -#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS) - -#elif !defined (CONFIG_403) - -/* - * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32 - * possible interrupts as well. There are seven, configurable external - * interrupt pins and there are 17 internal interrupts for the on-chip - * serial port, DMA controller, on-chip Ethernet controller, PCI, etc. - * - */ - - -#define NR_UIC_IRQS UIC_WIDTH -#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) -#endif - -#elif defined(CONFIG_44x) -#include - -#define NR_UIC_IRQS 32 -#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) - -#elif defined(CONFIG_8xx) - -/* Now include the board configuration specific associations. -*/ -#include - -/* The MPC8xx cores have 16 possible interrupts. There are eight - * possible level sensitive interrupts assigned and generated internally - * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer. - * There are eight external interrupts (IRQs) that can be configured - * as either level or edge sensitive. - * - * On some implementations, there is also the possibility of an 8259 - * through the PCI and PCI-ISA bridges. - * - * We are "flattening" the interrupt vectors of the cascaded CPM - * and 8259 interrupt controllers so that we can uniquely identify - * any interrupt source with a single integer. - */ -#define NR_SIU_INTS 16 -#define NR_CPM_INTS 32 -#ifndef NR_8259_INTS -#define NR_8259_INTS 0 -#endif - -#define SIU_IRQ_OFFSET 0 -#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS) -#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS) - -#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS) - -/* These values must be zero-based and map 1:1 with the SIU configuration. - * They are used throughout the 8xx I/O subsystem to generate - * interrupt masks, flags, and other control patterns. This is why the - * current kernel assumption of the 8259 as the base controller is such - * a pain in the butt. - */ -#define SIU_IRQ0 (0) /* Highest priority */ -#define SIU_LEVEL0 (1) -#define SIU_IRQ1 (2) -#define SIU_LEVEL1 (3) -#define SIU_IRQ2 (4) -#define SIU_LEVEL2 (5) -#define SIU_IRQ3 (6) -#define SIU_LEVEL3 (7) -#define SIU_IRQ4 (8) -#define SIU_LEVEL4 (9) -#define SIU_IRQ5 (10) -#define SIU_LEVEL5 (11) -#define SIU_IRQ6 (12) -#define SIU_LEVEL6 (13) -#define SIU_IRQ7 (14) -#define SIU_LEVEL7 (15) - -#define MPC8xx_INT_FEC1 SIU_LEVEL1 -#define MPC8xx_INT_FEC2 SIU_LEVEL3 - -#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1) -#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2) -#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3) -#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4) -#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1) -#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2) - -/* The internal interrupts we can configure as we see fit. - * My personal preference is CPM at level 2, which puts it above the - * MBX PCI/ISA/IDE interrupts. - */ -#ifndef PIT_INTERRUPT -#define PIT_INTERRUPT SIU_LEVEL0 -#endif -#ifndef CPM_INTERRUPT -#define CPM_INTERRUPT SIU_LEVEL2 -#endif -#ifndef PCMCIA_INTERRUPT -#define PCMCIA_INTERRUPT SIU_LEVEL6 -#endif -#ifndef DEC_INTERRUPT -#define DEC_INTERRUPT SIU_LEVEL7 -#endif - -/* Some internal interrupt registers use an 8-bit mask for the interrupt - * level instead of a number. - */ -#define mk_int_int_mask(IL) (1 << (7 - (IL/2))) - -#else /* CONFIG_40x + CONFIG_8xx */ -/* - * this is the # irq's for all ppc arch's (pmac/chrp/prep) - * so it is the max of them all - */ -#define NR_IRQS 256 -#define __DO_IRQ_CANON 1 - -#ifndef CONFIG_8260 - -#define NUM_8259_INTERRUPTS 16 - -#else /* CONFIG_8260 */ - -/* The 8260 has an internal interrupt controller with a maximum of - * 64 IRQs. We will use NR_IRQs from above since it is large enough. - * Don't be confused by the 8260 documentation where they list an - * "interrupt number" and "interrupt vector". We are only interested - * in the interrupt vector. There are "reserved" holes where the - * vector number increases, but the interrupt number in the table does not. - * (Document errata updates have fixed this...make sure you have up to - * date processor documentation -- Dan). - */ - -#ifndef CPM_IRQ_OFFSET -#define CPM_IRQ_OFFSET 0 -#endif - -#define NR_CPM_INTS 64 - -#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET) -#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET) -#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET) -#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET) -#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET) -#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET) -#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET) -#define SIU_INT_USB ((uint)0x0b + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET) -#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET) -#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET) -#define SIU_INT_PCI ((uint)0x12 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET) -#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET) -#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET) -#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET) -#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET) -#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET) -#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET) -#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET) -#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET) -#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET) -#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET) -#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET) -#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET) -#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET) -#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET) -#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET) -#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET) -#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET) -#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET) -#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET) - -#endif /* CONFIG_8260 */ - -#endif /* Whatever way too big #ifdef */ - -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -/* pedantic: these are long because they are used with set_bit --RR */ -extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; - -/* - * Because many systems have two overlapping names spaces for - * interrupts (ISA and XICS for example), and the ISA interrupts - * have historically not been easy to renumber, we allow ISA - * interrupts to take values 0 - 15, and shift up the remaining - * interrupts by 0x10. - */ -#define NUM_ISA_INTERRUPTS 0x10 -extern int __irq_offset_value; - -static inline int irq_offset_up(int irq) -{ - return(irq + __irq_offset_value); -} - -static inline int irq_offset_down(int irq) -{ - return(irq - __irq_offset_value); -} - -static inline int irq_offset_value(void) -{ - return __irq_offset_value; -} - -#ifdef __DO_IRQ_CANON -extern int ppc_do_canonicalize_irqs; -#else -#define ppc_do_canonicalize_irqs 0 -#endif - -static __inline__ int irq_canonicalize(int irq) -{ - if (ppc_do_canonicalize_irqs && irq == 2) - irq = 9; - return irq; -} -#endif /* CONFIG_PPC_MERGE */ - extern int distribute_irqs; struct irqaction; diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 1a4094704b1f..64f5948ebc9d 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -59,8 +59,6 @@ obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o -ifeq ($(CONFIG_PPC_MERGE),y) - extra-$(CONFIG_PPC_STD_MMU) := head_32.o extra-$(CONFIG_PPC64) := head_64.o extra-$(CONFIG_40x) := head_40x.o @@ -100,12 +98,6 @@ ifneq ($(CONFIG_PPC_INDIRECT_IO),y) obj-y += iomap.o endif -else -# stuff used from here for ARCH=ppc -smpobj-$(CONFIG_SMP) += smp.o - -endif - obj-$(CONFIG_PPC64) += $(obj64-y) extra-$(CONFIG_PPC_FPU) += fpu.o @@ -121,9 +113,6 @@ PHONY += systbl_chk systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i $(call cmd,systbl_chk) - -ifeq ($(CONFIG_PPC_MERGE),y) - $(obj)/built-in.o: prom_init_check quiet_cmd_prom_init_check = CALL $< @@ -133,7 +122,4 @@ PHONY += prom_init_check prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o $(call cmd,prom_init_check) -endif - - clean-files := vmlinux.lds diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S index 5465e8de0e61..80cac984d85d 100644 --- a/arch/powerpc/kernel/cpu_setup_44x.S +++ b/arch/powerpc/kernel/cpu_setup_44x.S @@ -39,12 +39,6 @@ _GLOBAL(__setup_cpu_440gx) _GLOBAL(__setup_cpu_440spe) b __fixup_440A_mcheck - /* Temporary fixup for arch/ppc until we kill the whole thing */ -#ifndef CONFIG_PPC_MERGE -_GLOBAL(__fixup_440A_mcheck) - blr -#endif - /* enable APU between CPU and FPU */ _GLOBAL(__init_fpu_44x) mfspr r3,SPRN_CCR0 diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 6ac8612da3c3..d972decf0324 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -77,22 +77,12 @@ static int ppc_spurious_interrupts; EXPORT_SYMBOL(__irq_offset_value); atomic_t ppc_n_lost_interrupts; -#ifndef CONFIG_PPC_MERGE -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; -#endif - #ifdef CONFIG_TAU_INT extern int tau_initialized; extern int tau_interrupts(int); #endif #endif /* CONFIG_PPC32 */ -#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) -extern atomic_t ipi_recv; -extern atomic_t ipi_sent; -#endif - #ifdef CONFIG_PPC64 EXPORT_SYMBOL(irq_desc); @@ -216,21 +206,14 @@ int show_interrupts(struct seq_file *p, void *v) skip: spin_unlock_irqrestore(&desc->lock, flags); } else if (i == NR_IRQS) { -#ifdef CONFIG_PPC32 -#ifdef CONFIG_TAU_INT +#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT) if (tau_initialized){ seq_puts(p, "TAU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", tau_interrupts(j)); seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); } -#endif -#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) - /* should this be per processor send/receive? */ - seq_printf(p, "IPI (recv/sent): %10u/%u\n", - atomic_read(&ipi_recv), atomic_read(&ipi_sent)); -#endif -#endif /* CONFIG_PPC32 */ +#endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/ seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts); } return 0; @@ -454,8 +437,6 @@ void do_softirq(void) * IRQ controller and virtual interrupts */ -#ifdef CONFIG_PPC_MERGE - static LIST_HEAD(irq_hosts); static DEFINE_SPINLOCK(irq_big_lock); static DEFINE_PER_CPU(unsigned int, irq_radix_reader); @@ -1114,8 +1095,6 @@ static int __init irq_debugfs_init(void) __initcall(irq_debugfs_init); #endif /* CONFIG_VIRQ_DEBUG */ -#endif /* CONFIG_PPC_MERGE */ - #ifdef CONFIG_PPC64 static int __init setup_noirqdistrib(char *str) { diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index e030f3bd5024..957bded0020d 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -276,10 +276,8 @@ int set_dabr(unsigned long dabr) { __get_cpu_var(current_dabr) = dabr; -#ifdef CONFIG_PPC_MERGE /* XXX for now */ if (ppc_md.set_dabr) return ppc_md.set_dabr(dabr); -#endif /* XXX should we have a CPU_FTR_HAS_DABR ? */ #if defined(CONFIG_PPC64) || defined(CONFIG_6xx) diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index f177c60ea766..65639a43e644 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -788,9 +788,7 @@ static int __init vdso_init(void) return 0; } -#ifdef CONFIG_PPC_MERGE arch_initcall(vdso_init); -#endif int in_gate_area_no_task(unsigned long addr) { diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 2a88e8b9a3c6..d69912c07ce7 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -6,12 +6,10 @@ ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc endif -ifeq ($(CONFIG_PPC_MERGE),y) obj-y := string.o alloc.o \ checksum_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o obj-$(CONFIG_HAS_IOMEM) += devres.o -endif obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \ memcpy_64.o usercopy_64.o mem_64.o string.o diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index daf0e1568d6d..b8a52062738a 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -1,10 +1,8 @@ # # Makefile for 52xx based boards # -ifeq ($(CONFIG_PPC_MERGE),y) obj-y += mpc52xx_pic.o mpc52xx_common.o obj-$(CONFIG_PCI) += mpc52xx_pci.o -endif obj-$(CONFIG_PPC_MPC5200_SIMPLE) += mpc5200_simple.o obj-$(CONFIG_PPC_EFIKA) += efika.o @@ -15,4 +13,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y) obj-$(CONFIG_PM) += lite5200_sleep.o lite5200_pm.o endif -obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o \ No newline at end of file +obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 423a0234dc31..8079e0b4fd69 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -1,13 +1,7 @@ obj-$(CONFIG_FSL_ULI1575) += fsl_uli1575.o -ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_PMAC) += powermac/ -else -ifeq ($(CONFIG_PPC64),y) -obj-$(CONFIG_PPC_PMAC) += powermac/ -endif -endif obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_40x) += 40x/ obj-$(CONFIG_44x) += 44x/ diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 89774177b209..58ecdd72630f 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -7,7 +7,7 @@ endif obj-y += pic.o setup.o time.o feature.o pci.o \ sleep.o low_i2c.o cache.o pfunc_core.o \ - pfunc_base.o + pfunc_base.o udbg_scc.o udbg_adb.o obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o @@ -19,4 +19,3 @@ obj-$(CONFIG_NVRAM:m=y) += nvram.o obj-$(CONFIG_PPC64) += nvram.o obj-$(CONFIG_PPC32) += bootx_init.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_PPC_MERGE) += udbg_scc.o udbg_adb.o diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 16a0ed28eb00..a90054b56d5c 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -25,7 +25,6 @@ obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \ obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o obj-$(CONFIG_AXON_RAM) += axonram.o -ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_IPIC) += ipic.o @@ -36,7 +35,6 @@ obj-$(CONFIG_OF_RTC) += of_rtc.o ifeq ($(CONFIG_PCI),y) obj-$(CONFIG_4xx) += ppc4xx_pci.o endif -endif # Temporary hack until we have migrated to asm-powerpc ifeq ($(ARCH),powerpc) -- cgit v1.2.3 From 6a9545bd95e88d61df942b9087cb59b8c7a6dc56 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 12:51:06 +0900 Subject: sh: Fix up broken kerneldoc comments. These were completely unparseable, so fix them up. Signed-off-by: Paul Mundt --- arch/sh/include/asm/tlb_64.h | 12 +++--------- arch/sh/kernel/cpu/sh4/sq.c | 2 +- arch/sh/mm/tlb-sh5.c | 20 ++++++-------------- drivers/sh/maple/maple.c | 27 ++++++++++++++------------- 4 files changed, 24 insertions(+), 37 deletions(-) diff --git a/arch/sh/include/asm/tlb_64.h b/arch/sh/include/asm/tlb_64.h index 0a96f3af69e3..ef0ae2a28f23 100644 --- a/arch/sh/include/asm/tlb_64.h +++ b/arch/sh/include/asm/tlb_64.h @@ -21,11 +21,9 @@ #ifndef __ASSEMBLY__ /** - * for_each_dtlb_entry + * for_each_dtlb_entry - Iterate over free (non-wired) DTLB entries * * @tlb: TLB entry - * - * Iterate over free (non-wired) DTLB entries */ #define for_each_dtlb_entry(tlb) \ for (tlb = cpu_data->dtlb.first; \ @@ -33,11 +31,9 @@ tlb += cpu_data->dtlb.step) /** - * for_each_itlb_entry + * for_each_itlb_entry - Iterate over free (non-wired) ITLB entries * * @tlb: TLB entry - * - * Iterate over free (non-wired) ITLB entries */ #define for_each_itlb_entry(tlb) \ for (tlb = cpu_data->itlb.first; \ @@ -45,11 +41,9 @@ tlb += cpu_data->itlb.step) /** - * __flush_tlb_slot + * __flush_tlb_slot - Flushes TLB slot @slot. * * @slot: Address of TLB slot. - * - * Flushes TLB slot @slot. */ static inline void __flush_tlb_slot(unsigned long long slot) { diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index dcdf959a3d44..8a8a993f55ea 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -199,7 +199,7 @@ EXPORT_SYMBOL(sq_remap); /** * sq_unmap - Unmap a Store Queue allocation - * @map: Pre-allocated Store Queue mapping. + * @vaddr: Pre-allocated Store Queue mapping. * * Unmaps the store queue allocation @map that was previously created by * sq_remap(). Also frees up the pte that was previously inserted into diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c index f34274a1ded3..dae131243bcc 100644 --- a/arch/sh/mm/tlb-sh5.c +++ b/arch/sh/mm/tlb-sh5.c @@ -15,9 +15,7 @@ #include /** - * sh64_tlb_init - * - * Perform initial setup for the DTLB and ITLB. + * sh64_tlb_init - Perform initial setup for the DTLB and ITLB. */ int __init sh64_tlb_init(void) { @@ -46,9 +44,7 @@ int __init sh64_tlb_init(void) } /** - * sh64_next_free_dtlb_entry - * - * Find the next available DTLB entry + * sh64_next_free_dtlb_entry - Find the next available DTLB entry */ unsigned long long sh64_next_free_dtlb_entry(void) { @@ -56,9 +52,7 @@ unsigned long long sh64_next_free_dtlb_entry(void) } /** - * sh64_get_wired_dtlb_entry - * - * Allocate a wired (locked-in) entry in the DTLB + * sh64_get_wired_dtlb_entry - Allocate a wired (locked-in) entry in the DTLB */ unsigned long long sh64_get_wired_dtlb_entry(void) { @@ -71,12 +65,10 @@ unsigned long long sh64_get_wired_dtlb_entry(void) } /** - * sh64_put_wired_dtlb_entry + * sh64_put_wired_dtlb_entry - Free a wired (locked-in) entry in the DTLB. * * @entry: Address of TLB slot. * - * Free a wired (locked-in) entry in the DTLB. - * * Works like a stack, last one to allocate must be first one to free. */ int sh64_put_wired_dtlb_entry(unsigned long long entry) @@ -115,7 +107,7 @@ int sh64_put_wired_dtlb_entry(unsigned long long entry) } /** - * sh64_setup_tlb_slot + * sh64_setup_tlb_slot - Load up a translation in a wired slot. * * @config_addr: Address of TLB slot. * @eaddr: Virtual address. @@ -154,7 +146,7 @@ inline void sh64_setup_tlb_slot(unsigned long long config_addr, } /** - * sh64_teardown_tlb_slot + * sh64_teardown_tlb_slot - Teardown a translation. * * @config_addr: Address of TLB slot. * diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c index be77a39f224c..d1812d32f47d 100644 --- a/drivers/sh/maple/maple.c +++ b/drivers/sh/maple/maple.c @@ -147,13 +147,13 @@ static void maple_release_device(struct device *dev) kfree(mdev); } -/* +/** * maple_add_packet - add a single instruction to the queue - * @mdev - maple device - * @function - function on device being queried - * @command - maple command to add - * @length - length of command string (in 32 bit words) - * @data - remainder of command string + * @mdev: maple device + * @function: function on device being queried + * @command: maple command to add + * @length: length of command string (in 32 bit words) + * @data: remainder of command string */ int maple_add_packet(struct maple_device *mdev, u32 function, u32 command, size_t length, void *data) @@ -194,14 +194,15 @@ out: } EXPORT_SYMBOL_GPL(maple_add_packet); -/* +/** * maple_add_packet_sleeps - add a single instruction to the queue - * - waits for lock to be free - * @mdev - maple device - * @function - function on device being queried - * @command - maple command to add - * @length - length of command string (in 32 bit words) - * @data - remainder of command string + * @mdev: maple device + * @function: function on device being queried + * @command: maple command to add + * @length: length of command string (in 32 bit words) + * @data: remainder of command string + * + * Same as maple_add_packet(), but waits for the lock to become free. */ int maple_add_packet_sleeps(struct maple_device *mdev, u32 function, u32 command, size_t length, void *data) -- cgit v1.2.3 From b5ed042249cb5f76a428aa40ca219d591dad9eea Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 12:53:55 +0900 Subject: sh: Add documentation and integrate into docbook build. This adds some preliminary docbook bits for SH, tying in to the few interfaces that are exposed and that have adequate kerneldoc comments. Signed-off-by: Paul Mundt --- Documentation/DocBook/Makefile | 2 +- Documentation/DocBook/sh.tmpl | 105 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 106 insertions(+), 1 deletion(-) create mode 100644 Documentation/DocBook/sh.tmpl diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 0eb0d027eb32..1d1b34500b69 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -12,7 +12,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ - mac80211.xml debugobjects.xml + mac80211.xml debugobjects.xml sh.xml ### # The build process is as follows (targets): diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl new file mode 100644 index 000000000000..0c3dc4c69dd1 --- /dev/null +++ b/Documentation/DocBook/sh.tmpl @@ -0,0 +1,105 @@ + + + + + + SuperH Interfaces Guide + + + + Paul + Mundt + +
+ lethal@linux-sh.org +
+ + + + + + 2008 + Paul Mundt + + + 2008 + Renesas Technology Corp. + + + + + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2 as published by the Free Software Foundation. + + + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + + + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + + + + For more details see the file COPYING in the source + distribution of Linux. + + + + + + + + Memory Management + + SH-4 + + Store Queue API +!Earch/sh/kernel/cpu/sh4/sq.c + + + + SH-5 + + TLB Interfaces +!Iarch/sh/mm/tlb-sh5.c +!Iarch/sh/include/asm/tlb_64.h + + + + + Clock Framework Extensions +!Iarch/sh/include/asm/clock.h + + + Machine Specific Interfaces + + mach-dreamcast +!Iarch/sh/boards/mach-dreamcast/rtc.c + + + mach-x3proto +!Earch/sh/boards/mach-x3proto/ilsel.c + + + + Busses + + SuperHyway +!Edrivers/sh/superhyway/superhyway.c + + + + Maple +!Edrivers/sh/maple/maple.c + + + -- cgit v1.2.3 From f880374c2fe37aad3fa62253a4bc125d7a933aad Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 3 Aug 2008 21:15:08 -0700 Subject: sctp: Drop ipfargok in sctp_xmit function The ipfragok flag controls whether the packet may be fragmented either on the local host on beyond. The latter is only valid on IPv4. In fact, we never want to do the latter even on IPv4 when PMTU is enabled. This is because even though we can't fragment packets within SCTP due to the prtocol's inherent faults, we can still fragment it at IP layer. By setting the DF bit we will improve the PMTU process. RFC 2960 only says that we SHOULD clear the DF bit in this case, so we're compliant even if we set the DF bit. In fact RFC 4960 no longer has this statement. Once we make this change, we only need to control the local fragmentation. There is already a bit in the skb which controls that, local_df. So this patch sets that instead of using the ipfragok argument. The only complication is that there isn't a struct sock object per transport, so for IPv4 we have to resort to changing the pmtudisc field for every packet. This should be safe though as the protocol is single-threaded. Note that after this patch we can remove ipfragok from the rest of the stack too. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/net/sctp/structs.h | 3 +-- net/sctp/ipv6.c | 8 +++++--- net/sctp/output.c | 6 ++---- net/sctp/protocol.c | 9 +++++++-- 4 files changed, 15 insertions(+), 11 deletions(-) diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 535a18f57a13..ab1c472ea753 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -524,8 +524,7 @@ static inline void sctp_ssn_skip(struct sctp_stream *stream, __u16 id, */ struct sctp_af { int (*sctp_xmit) (struct sk_buff *skb, - struct sctp_transport *, - int ipfragok); + struct sctp_transport *); int (*setsockopt) (struct sock *sk, int level, int optname, diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index a238d6834b33..483a01d0740a 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -195,8 +195,7 @@ out: } /* Based on tcp_v6_xmit() in tcp_ipv6.c. */ -static int sctp_v6_xmit(struct sk_buff *skb, struct sctp_transport *transport, - int ipfragok) +static int sctp_v6_xmit(struct sk_buff *skb, struct sctp_transport *transport) { struct sock *sk = skb->sk; struct ipv6_pinfo *np = inet6_sk(sk); @@ -231,7 +230,10 @@ static int sctp_v6_xmit(struct sk_buff *skb, struct sctp_transport *transport, SCTP_INC_STATS(SCTP_MIB_OUTSCTPPACKS); - return ip6_xmit(sk, skb, &fl, np->opt, ipfragok); + if (!(transport->param_flags & SPP_PMTUD_ENABLE)) + skb->local_df = 1; + + return ip6_xmit(sk, skb, &fl, np->opt, 0); } /* Returns the dst cache entry for the given source and destination ip diff --git a/net/sctp/output.c b/net/sctp/output.c index 45684646b1db..0dc4a7dfb234 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -586,10 +586,8 @@ int sctp_packet_transmit(struct sctp_packet *packet) SCTP_DEBUG_PRINTK("***sctp_transmit_packet*** skb len %d\n", nskb->len); - if (tp->param_flags & SPP_PMTUD_ENABLE) - (*tp->af_specific->sctp_xmit)(nskb, tp, packet->ipfragok); - else - (*tp->af_specific->sctp_xmit)(nskb, tp, 1); + nskb->local_df = packet->ipfragok; + (*tp->af_specific->sctp_xmit)(nskb, tp); out: packet->size = packet->overhead; diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index a6e0818bcff5..0b65354aaf64 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -862,16 +862,21 @@ static int sctp_inet_supported_addrs(const struct sctp_sock *opt, /* Wrapper routine that calls the ip transmit routine. */ static inline int sctp_v4_xmit(struct sk_buff *skb, - struct sctp_transport *transport, int ipfragok) + struct sctp_transport *transport) { + struct inet_sock *inet = inet_sk(skb->sk); + SCTP_DEBUG_PRINTK("%s: skb:%p, len:%d, " "src:%u.%u.%u.%u, dst:%u.%u.%u.%u\n", __func__, skb, skb->len, NIPQUAD(skb->rtable->rt_src), NIPQUAD(skb->rtable->rt_dst)); + inet->pmtudisc = transport->param_flags & SPP_PMTUD_ENABLE ? + IP_PMTUDISC_DO : IP_PMTUDISC_DONT; + SCTP_INC_STATS(SCTP_MIB_OUTSCTPPACKS); - return ip_queue_xmit(skb, ipfragok); + return ip_queue_xmit(skb, 0); } static struct sctp_af sctp_af_inet; -- cgit v1.2.3 From 283d07ac201ee9f8aa6dc6f7519436b48760baff Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 3 Aug 2008 21:15:59 -0700 Subject: ipv6: Do not drop packet if skb->local_df is set to true The old code will drop IPv6 packet if ipfragok is not set, since ipfragok is obsoleted, will be instead by used skb->local_df, so this check must be changed to skb->local_df. This patch fix this problem and not drop packet if skb->local_df is set to true. Signed-off-by: Wei Yongjun Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index a027003d69a4..a4402de425d9 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -269,7 +269,7 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl, skb->mark = sk->sk_mark; mtu = dst_mtu(dst); - if ((skb->len <= mtu) || ipfragok || skb_is_gso(skb)) { + if ((skb->len <= mtu) || skb->local_df || skb_is_gso(skb)) { IP6_INC_STATS(ip6_dst_idev(skb->dst), IPSTATS_MIB_OUTREQUESTS); return NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, dst->dev, -- cgit v1.2.3 From 6e583ce5242f32e925dcb198f7123256d0798370 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Sun, 3 Aug 2008 21:29:57 -0700 Subject: net: eliminate refcounting in backlog queue Avoid the overhead of atomic increment/decrement on each received packet. This helps performance of non-NAPI devices (like loopback). Use cleanup function to walk queue on each cpu and clean out any left over packets. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/core/dev.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index cbf80098980c..fc6c9881eca8 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1909,7 +1909,6 @@ int netif_rx(struct sk_buff *skb) if (queue->input_pkt_queue.qlen <= netdev_max_backlog) { if (queue->input_pkt_queue.qlen) { enqueue: - dev_hold(skb->dev); __skb_queue_tail(&queue->input_pkt_queue, skb); local_irq_restore(flags); return NET_RX_SUCCESS; @@ -2270,6 +2269,20 @@ out: return ret; } +/* Network device is going away, flush any packets still pending */ +static void flush_backlog(void *arg) +{ + struct net_device *dev = arg; + struct softnet_data *queue = &__get_cpu_var(softnet_data); + struct sk_buff *skb, *tmp; + + skb_queue_walk_safe(&queue->input_pkt_queue, skb, tmp) + if (skb->dev == dev) { + __skb_unlink(skb, &queue->input_pkt_queue); + kfree_skb(skb); + } +} + static int process_backlog(struct napi_struct *napi, int quota) { int work = 0; @@ -2279,7 +2292,6 @@ static int process_backlog(struct napi_struct *napi, int quota) napi->weight = weight_p; do { struct sk_buff *skb; - struct net_device *dev; local_irq_disable(); skb = __skb_dequeue(&queue->input_pkt_queue); @@ -2288,14 +2300,9 @@ static int process_backlog(struct napi_struct *napi, int quota) local_irq_enable(); break; } - local_irq_enable(); - dev = skb->dev; - netif_receive_skb(skb); - - dev_put(dev); } while (++work < quota && jiffies == start_time); return work; @@ -4169,6 +4176,8 @@ void netdev_run_todo(void) dev->reg_state = NETREG_UNREGISTERED; + on_each_cpu(flush_backlog, dev, 1); + netdev_wait_allrefs(dev); /* paranoia */ -- cgit v1.2.3 From 3108cf061228c2c2951006c80fb6fe832000adda Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 13:32:04 +0900 Subject: sh: Fix up __bug_table handling in module loader. We should be calling in to the lib/bug.c module helpers, fix that up. Signed-off-by: Paul Mundt --- arch/sh/kernel/module.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c index 5482e65375a9..6ba2b79b826b 100644 --- a/arch/sh/kernel/module.c +++ b/arch/sh/kernel/module.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -145,9 +146,10 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) { - return 0; + return module_bug_finalize(hdr, sechdrs, me); } void module_arch_cleanup(struct module *mod) { + module_bug_cleanup(mod); } -- cgit v1.2.3 From 4b59c97325371d51275bdb50523fa98a301615b0 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 13:34:29 +0900 Subject: sh: module_alloc() should be using vmalloc_exec(). SH-X2 extended mode TLB allows for toggling of the exec bit, so make sure we are using the right protection bits for module space there also. Signed-off-by: Paul Mundt --- arch/sh/kernel/module.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c index 6ba2b79b826b..c43081039dd5 100644 --- a/arch/sh/kernel/module.c +++ b/arch/sh/kernel/module.c @@ -37,7 +37,8 @@ void *module_alloc(unsigned long size) { if (size == 0) return NULL; - return vmalloc(size); + + return vmalloc_exec(size); } -- cgit v1.2.3 From c3b4adfa65bae300a143188491e285556ca80fff Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 13:42:49 +0900 Subject: sh: Save NUMA node data in vmcore for crash dumps. Presently the NUMA node data isn't saved on kexec. This implements a simple arch_crash_save_vmcoreinfo() for saving off the relevant data. Signed-off-by: Paul Mundt --- arch/sh/kernel/machine_kexec.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c index ec1eadce4aaa..4703dff174d5 100644 --- a/arch/sh/kernel/machine_kexec.c +++ b/arch/sh/kernel/machine_kexec.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -104,3 +105,10 @@ void machine_kexec(struct kimage *image) (*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg); } +void arch_crash_save_vmcoreinfo(void) +{ +#ifdef CONFIG_NUMA + VMCOREINFO_SYMBOL(node_data); + VMCOREINFO_LENGTH(node_data, MAX_NUMNODES); +#endif +} -- cgit v1.2.3 From bdcab87b1c54f61dbc0a77648fee4c2b17964d5c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 14:09:15 +0900 Subject: sh: define GENERIC_LOCKBREAK. Needed for fixing up the __raw_spin_is_contended() reference which results in a build error. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 0ae541107f3f..37b91017818d 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -63,6 +63,10 @@ config GENERIC_TIME config GENERIC_CLOCKEVENTS def_bool n +config GENERIC_LOCKBREAK + def_bool y + depends on SMP && PREEMPT + config SYS_SUPPORTS_PM bool -- cgit v1.2.3 From 5093c9a4e41518425d42c0bb5bb92f514ec77b1d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 14:17:13 +0900 Subject: sh: define GENERIC_HARDIRQS_NO__DO_IRQ. We haven't called in to __do_IRQ() in a long time, so it seems like a reasonable time to switch this on by default. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 37b91017818d..1a4dc7663441 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -48,6 +48,9 @@ config GENERIC_HWEIGHT config GENERIC_HARDIRQS def_bool y +config GENERIC_HARDIRQS_NO__DO_IRQ + def_bool y + config GENERIC_IRQ_PROBE def_bool y -- cgit v1.2.3 From 42ced5561a3f49ba0ef09e94ccc016841fc94aa7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 14:18:53 +0900 Subject: sh: Kill off ARCH_SUPPORTS_AOUT and remnants of a.out support. SH never really supported a.out, so this was all just copied over blindly from x86 way back when. As we don't reference linux/a.out.h anywhere in the tree, these can now safely be killed off. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 3 --- arch/sh/include/asm/a.out.h | 20 -------------------- 2 files changed, 23 deletions(-) delete mode 100644 arch/sh/include/asm/a.out.h diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 1a4dc7663441..5131d50f851a 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -101,9 +101,6 @@ config ARCH_HAS_ILOG2_U64 config ARCH_NO_VIRT_TO_BUS def_bool y -config ARCH_SUPPORTS_AOUT - def_bool y - config IO_TRAPPED bool diff --git a/arch/sh/include/asm/a.out.h b/arch/sh/include/asm/a.out.h deleted file mode 100644 index 1f93130e179c..000000000000 --- a/arch/sh/include/asm/a.out.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_SH_A_OUT_H -#define __ASM_SH_A_OUT_H - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#endif /* __ASM_SH_A_OUT_H */ -- cgit v1.2.3 From d8eb2fab18b856fcaebe2619e8eaaa152baebc66 Mon Sep 17 00:00:00 2001 From: Takashi Yoshii Date: Mon, 4 Aug 2008 14:28:38 +0900 Subject: add addrespace definition for sh2a. Newfile: arch/sh/include/cpu-sh2a/cpu/addrspace.h This file seems had be removed to use fallback (cpu-common/cpu/addrspace.h), but, I'd like to add sh2a specific file here, because 1. the values defined there are not suitable for sh2a. 2. I don't think there is "common" definition for these values. Values are chosen by consideration of followings... P1 is 0. perhaps no question. P2 is from hardware manual, which says no-cache area starts at 20000000. It means that P? space size=20000000. P3 is P2+size since asm/ptrace.h uses P3 as a end of P2. P4 is P3+size since asm/fixup.h uses P4 as a end of P3. Signed-off-by: Takashi YOSHII Signed-off-by: Paul Mundt --- arch/sh/include/cpu-sh2a/cpu/addrspace.h | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 arch/sh/include/cpu-sh2a/cpu/addrspace.h diff --git a/arch/sh/include/cpu-sh2a/cpu/addrspace.h b/arch/sh/include/cpu-sh2a/cpu/addrspace.h new file mode 100644 index 000000000000..31eb4b58aa6d --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/addrspace.h @@ -0,0 +1,10 @@ +#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H +#define __ASM_SH_CPU_SH2A_ADDRSPACE_H + +#define P0SEG 0x00000000 +#define P1SEG 0x00000000 +#define P2SEG 0x20000000 +#define P3SEG 0x40000000 +#define P4SEG 0x60000000 + +#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */ -- cgit v1.2.3 From 1af446edfe3239b2b731f3458b3c285c397464cc Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 16:01:47 +0900 Subject: nommu: Provide vmalloc_exec(). Now that SH has switched to vmalloc_exec() for PAGE_KERNEL_EXEC usage, it's apparent that nommu has no vmalloc_exec() definition of its own. Stub in the one from mm/vmalloc.c. Signed-off-by: Paul Mundt --- mm/nommu.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/mm/nommu.c b/mm/nommu.c index 5edccd9c9218..ed75bc962fbe 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -266,6 +266,27 @@ void *vmalloc_node(unsigned long size, int node) } EXPORT_SYMBOL(vmalloc_node); +#ifndef PAGE_KERNEL_EXEC +# define PAGE_KERNEL_EXEC PAGE_KERNEL +#endif + +/** + * vmalloc_exec - allocate virtually contiguous, executable memory + * @size: allocation size + * + * Kernel-internal function to allocate enough pages to cover @size + * the page level allocator and map them into contiguous and + * executable kernel virtual space. + * + * For tight control over page level allocator and protection flags + * use __vmalloc() instead. + */ + +void *vmalloc_exec(unsigned long size) +{ + return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL_EXEC); +} + /** * vmalloc_32 - allocate virtually contiguous memory (32bit addressable) * @size: allocation size -- cgit v1.2.3 From cce2d453e4940d3fccd42a6917d01027148e11c3 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Mon, 4 Aug 2008 16:33:47 +0900 Subject: SH2(A) cache update Includes: - SH2 (7619) Writeback support. - SH2A cache handling fix. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- arch/sh/include/cpu-sh2/cpu/cache.h | 6 +- arch/sh/include/cpu-sh2a/cpu/cache.h | 3 + arch/sh/include/cpu-sh2a/cpu/cacheflush.h | 34 ++++++++ arch/sh/mm/Kconfig | 1 - arch/sh/mm/Makefile_32 | 11 ++- arch/sh/mm/cache-sh2.c | 45 ++++++++--- arch/sh/mm/cache-sh2a.c | 129 ++++++++++++++++++++++++++++++ 7 files changed, 213 insertions(+), 16 deletions(-) create mode 100644 arch/sh/include/cpu-sh2a/cpu/cacheflush.h create mode 100644 arch/sh/mm/cache-sh2a.c diff --git a/arch/sh/include/cpu-sh2/cpu/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h index 4e0b16500686..673515bc4135 100644 --- a/arch/sh/include/cpu-sh2/cpu/cache.h +++ b/arch/sh/include/cpu-sh2/cpu/cache.h @@ -21,11 +21,11 @@ #define CCR 0xffffffec #define CCR_CACHE_CE 0x01 /* Cache enable */ -#define CCR_CACHE_WT 0x06 /* CCR[bit1=1,bit2=1] */ +#define CCR_CACHE_WT 0x02 /* CCR[bit1=1,bit2=1] */ /* 0x00000000-0x7fffffff: Write-through */ /* 0x80000000-0x9fffffff: Write-back */ /* 0xc0000000-0xdfffffff: Write-through */ -#define CCR_CACHE_CB 0x00 /* CCR[bit1=0,bit2=0] */ +#define CCR_CACHE_CB 0x04 /* CCR[bit1=0,bit2=0] */ /* 0x00000000-0x7fffffff: Write-back */ /* 0x80000000-0x9fffffff: Write-through */ /* 0xc0000000-0xdfffffff: Write-back */ @@ -36,6 +36,8 @@ #define CCR_CACHE_ENABLE CCR_CACHE_CE #define CCR_CACHE_INVALIDATE CCR_CACHE_CF +#define CACHE_PHYSADDR_MASK 0x1ffffc00 + #endif #endif /* __ASM_CPU_SH2_CACHE_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h index afe228b3f493..defb0baa5a06 100644 --- a/arch/sh/include/cpu-sh2a/cpu/cache.h +++ b/arch/sh/include/cpu-sh2a/cpu/cache.h @@ -36,5 +36,8 @@ #define CCR_CACHE_ENABLE (CCR_CACHE_OCE | CCR_CACHE_ICE) #define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI | CCR_CACHE_ICI) +#define CCR_ICACHE_INVALIDATE CCR_CACHE_ICI +#define CCR_OCACHE_INVALIDATE CCR_CACHE_OCI +#define CACHE_PHYSADDR_MASK 0x1ffffc00 #endif /* __ASM_CPU_SH2A_CACHE_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h new file mode 100644 index 000000000000..3d3b9205d2ac --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h @@ -0,0 +1,34 @@ +#ifndef __ASM_CPU_SH2A_CACHEFLUSH_H +#define __ASM_CPU_SH2A_CACHEFLUSH_H + +/* + * Cache flushing: + * + * - flush_cache_all() flushes entire cache + * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking + * - flush_cache_page(mm, vmaddr, pfn) flushes a single page + * - flush_cache_range(vma, start, end) flushes a range of pages + * + * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache + * - flush_icache_range(start, end) flushes(invalidates) a range for icache + * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache + * + * Caches are indexed (effectively) by physical address on SH-2, so + * we don't need them. + */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +void flush_icache_range(unsigned long start, unsigned long end); +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_sigtramp(vaddr) do { } while (0) + +#define p3_cache_init() do { } while (0) +#endif /* __ASM_CPU_SH2A_CACHEFLUSH_H */ diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 56d0a7daa34b..9c131cac91a4 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -237,7 +237,6 @@ choice config CACHE_WRITEBACK bool "Write-back" - depends on CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5 config CACHE_WRITETHROUGH bool "Write-through" diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32 index e295db60b91b..70e0906023cc 100644 --- a/arch/sh/mm/Makefile_32 +++ b/arch/sh/mm/Makefile_32 @@ -5,12 +5,15 @@ obj-y := init.o extable_32.o consistent.o ifndef CONFIG_CACHE_OFF -obj-$(CONFIG_CPU_SH2) += cache-sh2.o -obj-$(CONFIG_CPU_SH3) += cache-sh3.o -obj-$(CONFIG_CPU_SH4) += cache-sh4.o -obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o +cache-$(CONFIG_CPU_SH2) := cache-sh2.o +cache-$(CONFIG_CPU_SH2A) := cache-sh2a.o +cache-$(CONFIG_CPU_SH3) := cache-sh3.o +cache-$(CONFIG_CPU_SH4) := cache-sh4.o +cache-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o endif +obj-y += $(cache-y) + mmu-y := tlb-nommu.o pg-nommu.o mmu-$(CONFIG_MMU) := fault_32.o tlbflush_32.o ioremap_32.o diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c index 6614033f6be9..c4e80d2b764b 100644 --- a/arch/sh/mm/cache-sh2.c +++ b/arch/sh/mm/cache-sh2.c @@ -2,6 +2,7 @@ * arch/sh/mm/cache-sh2.c * * Copyright (C) 2002 Paul Mundt + * Copyright (C) 2008 Yoshinori Sato * * Released under the terms of the GNU GPL v2.0. */ @@ -24,8 +25,15 @@ void __flush_wback_region(void *start, int size) end = ((unsigned long)start + size + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1); for (v = begin; v < end; v+=L1_CACHE_BYTES) { - /* FIXME cache purge */ - ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008); + unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0); + int way; + for (way = 0; way < 4; way++) { + unsigned long data = ctrl_inl(addr | (way << 12)); + if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) { + data &= ~SH_CACHE_UPDATED; + ctrl_outl(data, addr | (way << 12)); + } + } } } @@ -37,21 +45,40 @@ void __flush_purge_region(void *start, int size) begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); end = ((unsigned long)start + size + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1); - for (v = begin; v < end; v+=L1_CACHE_BYTES) { - ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008); - } + + for (v = begin; v < end; v+=L1_CACHE_BYTES) + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008); } void __flush_invalidate_region(void *start, int size) { +#ifdef CONFIG_CACHE_WRITEBACK + /* + * SH-2 does not support individual line invalidation, only a + * global invalidate. + */ + unsigned long ccr; + unsigned long flags; + local_irq_save(flags); + jump_to_uncached(); + + ccr = ctrl_inl(CCR); + ccr |= CCR_CACHE_INVALIDATE; + ctrl_outl(ccr, CCR); + + back_to_cached(); + local_irq_restore(flags); +#else unsigned long v; unsigned long begin, end; begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); end = ((unsigned long)start + size + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1); - for (v = begin; v < end; v+=L1_CACHE_BYTES) { - ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008); - } -} + for (v = begin; v < end; v+=L1_CACHE_BYTES) + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008); +#endif +} diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c new file mode 100644 index 000000000000..62c0c5f35120 --- /dev/null +++ b/arch/sh/mm/cache-sh2a.c @@ -0,0 +1,129 @@ +/* + * arch/sh/mm/cache-sh2a.c + * + * Copyright (C) 2008 Yoshinori Sato + * + * Released under the terms of the GNU GPL v2.0. + */ + +#include +#include + +#include +#include +#include +#include +#include + +void __flush_wback_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + unsigned long flags; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + + local_irq_save(flags); + jump_to_uncached(); + + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0); + int way; + for (way = 0; way < 4; way++) { + unsigned long data = ctrl_inl(addr | (way << 11)); + if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) { + data &= ~SH_CACHE_UPDATED; + ctrl_outl(data, addr | (way << 11)); + } + } + } + + back_to_cached(); + local_irq_restore(flags); +} + +void __flush_purge_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + unsigned long flags; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + + local_irq_save(flags); + jump_to_uncached(); + + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + } + back_to_cached(); + local_irq_restore(flags); +} + +void __flush_invalidate_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + unsigned long flags; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + local_irq_save(flags); + jump_to_uncached(); + +#ifdef CONFIG_CACHE_WRITEBACK + ctrl_outl(ctrl_inl(CCR) | CCR_OCACHE_INVALIDATE, CCR); + /* I-cache invalidate */ + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + } +#else + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + } +#endif + back_to_cached(); + local_irq_restore(flags); +} + +/* WBack O-Cache and flush I-Cache */ +void flush_icache_range(unsigned long start, unsigned long end) +{ + unsigned long v; + unsigned long flags; + + start = start & ~(L1_CACHE_BYTES-1); + end = (end + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1); + + local_irq_save(flags); + jump_to_uncached(); + + for (v = start; v < end; v+=L1_CACHE_BYTES) { + unsigned long addr = (v & 0x000007f0); + int way; + /* O-Cache writeback */ + for (way = 0; way < 4; way++) { + unsigned long data = ctrl_inl(CACHE_OC_ADDRESS_ARRAY | addr | (way << 11)); + if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) { + data &= ~SH_CACHE_UPDATED; + ctrl_outl(data, CACHE_OC_ADDRESS_ARRAY | addr | (way << 11)); + } + } + /* I-Cache invalidate */ + ctrl_outl(addr, + CACHE_IC_ADDRESS_ARRAY | addr | 0x00000008); + } + + back_to_cached(); + local_irq_restore(flags); +} -- cgit v1.2.3 From f5663f5bded3364158e2d31904173cb1debc2ecd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 16:52:34 +0900 Subject: sh: enable maple_keyb in dreamcast_defconfig. Signed-off-by: Paul Mundt --- arch/sh/configs/dreamcast_defconfig | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig index d4075283956d..3dc1cbd8a981 100644 --- a/arch/sh/configs/dreamcast_defconfig +++ b/arch/sh/configs/dreamcast_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 01:34:24 2008 +# Linux kernel version: 2.6.27-rc1 +# Mon Aug 4 16:49:13 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,6 +11,7 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y @@ -21,7 +22,6 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -87,6 +87,7 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -284,6 +285,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SECCOMP=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -317,10 +319,6 @@ CONFIG_PCI_LEGACY=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -555,7 +553,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_MAPLE is not set +CONFIG_KEYBOARD_MAPLE=y # CONFIG_KEYBOARD_SH_KEYSC is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set -- cgit v1.2.3 From 1a61c88defcd611bd148d6c960b498e1b8bbbe00 Mon Sep 17 00:00:00 2001 From: zhangxiliang Date: Sat, 2 Aug 2008 10:56:37 +0800 Subject: Re: [PATCH] Fix the kernel panic of audit_filter_task when key field is set Sorry, I miss a blank between if and "(". And I add "unlikely" to check "ctx" in audit_match_perm() and audit_match_filetype(). This is a new patch for it. Signed-off-by: Zhang Xiliang Signed-off-by: Al Viro --- kernel/auditsc.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 496c3dd37276..972f8e61d36a 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -243,6 +243,9 @@ static inline int open_arg(int flags, int mask) static int audit_match_perm(struct audit_context *ctx, int mask) { + if (unlikely(!ctx)) + return 0; + unsigned n = ctx->major; switch (audit_classify_syscall(ctx->arch, n)) { case 0: /* native */ @@ -284,6 +287,10 @@ static int audit_match_filetype(struct audit_context *ctx, int which) { unsigned index = which & ~S_IFMT; mode_t mode = which & S_IFMT; + + if (unlikely(!ctx)) + return 0; + if (index >= ctx->name_count) return 0; if (ctx->names[index].ino == -1) -- cgit v1.2.3 From bf9c8c9ddef7ef761ae9747349175adad0ef16ce Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 1 Aug 2008 14:58:44 -0500 Subject: ALSA: ASoC: fix SNDCTL_DSP_SYNC support in Freescale 8610 sound drivers If an OSS application calls SNDCTL_DSP_SYNC, then ALSA will call the driver's _hw_params and _prepare functions again. On the Freescale MPC8610 DMA ASoC driver, this caused the DMA controller to be unneccessarily re-programmed, and apparently it doesn't like that. The DMA will then not operate when instructed. This patch relocates much of the DMA programming to fsl_dma_open(), which is called only once. Signed-off-by: Timur Tabi Signed-off-by: Takashi Iwai --- sound/soc/fsl/fsl_dma.c | 235 +++++++++++++++++++++++++----------------------- 1 file changed, 124 insertions(+), 111 deletions(-) diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index 7ceea2bba1f5..d2d3da9729f2 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -327,14 +327,75 @@ static int fsl_dma_new(struct snd_card *card, struct snd_soc_dai *dai, * fsl_dma_open: open a new substream. * * Each substream has its own DMA buffer. + * + * ALSA divides the DMA buffer into N periods. We create NUM_DMA_LINKS link + * descriptors that ping-pong from one period to the next. For example, if + * there are six periods and two link descriptors, this is how they look + * before playback starts: + * + * The last link descriptor + * ____________ points back to the first + * | | + * V | + * ___ ___ | + * | |->| |->| + * |___| |___| + * | | + * | | + * V V + * _________________________________________ + * | | | | | | | The DMA buffer is + * | | | | | | | divided into 6 parts + * |______|______|______|______|______|______| + * + * and here's how they look after the first period is finished playing: + * + * ____________ + * | | + * V | + * ___ ___ | + * | |->| |->| + * |___| |___| + * | | + * |______________ + * | | + * V V + * _________________________________________ + * | | | | | | | + * | | | | | | | + * |______|______|______|______|______|______| + * + * The first link descriptor now points to the third period. The DMA + * controller is currently playing the second period. When it finishes, it + * will jump back to the first descriptor and play the third period. + * + * There are four reasons we do this: + * + * 1. The only way to get the DMA controller to automatically restart the + * transfer when it gets to the end of the buffer is to use chaining + * mode. Basic direct mode doesn't offer that feature. + * 2. We need to receive an interrupt at the end of every period. The DMA + * controller can generate an interrupt at the end of every link transfer + * (aka segment). Making each period into a DMA segment will give us the + * interrupts we need. + * 3. By creating only two link descriptors, regardless of the number of + * periods, we do not need to reallocate the link descriptors if the + * number of periods changes. + * 4. All of the audio data is still stored in a single, contiguous DMA + * buffer, which is what ALSA expects. We're just dividing it into + * contiguous parts, and creating a link descriptor for each one. */ static int fsl_dma_open(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; struct fsl_dma_private *dma_private; + struct ccsr_dma_channel __iomem *dma_channel; dma_addr_t ld_buf_phys; + u64 temp_link; /* Pointer to next link descriptor */ + u32 mr; unsigned int channel; int ret = 0; + unsigned int i; /* * Reject any DMA buffer whose size is not a multiple of the period @@ -395,68 +456,74 @@ static int fsl_dma_open(struct snd_pcm_substream *substream) snd_soc_set_runtime_hwparams(substream, &fsl_dma_hardware); runtime->private_data = dma_private; + /* Program the fixed DMA controller parameters */ + + dma_channel = dma_private->dma_channel; + + temp_link = dma_private->ld_buf_phys + + sizeof(struct fsl_dma_link_descriptor); + + for (i = 0; i < NUM_DMA_LINKS; i++) { + struct fsl_dma_link_descriptor *link = &dma_private->link[i]; + + link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); + link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); + link->next = cpu_to_be64(temp_link); + + temp_link += sizeof(struct fsl_dma_link_descriptor); + } + /* The last link descriptor points to the first */ + dma_private->link[i - 1].next = cpu_to_be64(dma_private->ld_buf_phys); + + /* Tell the DMA controller where the first link descriptor is */ + out_be32(&dma_channel->clndar, + CCSR_DMA_CLNDAR_ADDR(dma_private->ld_buf_phys)); + out_be32(&dma_channel->eclndar, + CCSR_DMA_ECLNDAR_ADDR(dma_private->ld_buf_phys)); + + /* The manual says the BCR must be clear before enabling EMP */ + out_be32(&dma_channel->bcr, 0); + + /* + * Program the mode register for interrupts, external master control, + * and source/destination hold. Also clear the Channel Abort bit. + */ + mr = in_be32(&dma_channel->mr) & + ~(CCSR_DMA_MR_CA | CCSR_DMA_MR_DAHE | CCSR_DMA_MR_SAHE); + + /* + * We want External Master Start and External Master Pause enabled, + * because the SSI is controlling the DMA controller. We want the DMA + * controller to be set up in advance, and then we signal only the SSI + * to start transferring. + * + * We want End-Of-Segment Interrupts enabled, because this will generate + * an interrupt at the end of each segment (each link descriptor + * represents one segment). Each DMA segment is the same thing as an + * ALSA period, so this is how we get an interrupt at the end of every + * period. + * + * We want Error Interrupt enabled, so that we can get an error if + * the DMA controller is mis-programmed somehow. + */ + mr |= CCSR_DMA_MR_EOSIE | CCSR_DMA_MR_EIE | CCSR_DMA_MR_EMP_EN | + CCSR_DMA_MR_EMS_EN; + + /* For playback, we want the destination address to be held. For + capture, set the source address to be held. */ + mr |= (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? + CCSR_DMA_MR_DAHE : CCSR_DMA_MR_SAHE; + + out_be32(&dma_channel->mr, mr); + return 0; } /** - * fsl_dma_hw_params: allocate the DMA buffer and the DMA link descriptors. - * - * ALSA divides the DMA buffer into N periods. We create NUM_DMA_LINKS link - * descriptors that ping-pong from one period to the next. For example, if - * there are six periods and two link descriptors, this is how they look - * before playback starts: - * - * The last link descriptor - * ____________ points back to the first - * | | - * V | - * ___ ___ | - * | |->| |->| - * |___| |___| - * | | - * | | - * V V - * _________________________________________ - * | | | | | | | The DMA buffer is - * | | | | | | | divided into 6 parts - * |______|______|______|______|______|______| - * - * and here's how they look after the first period is finished playing: - * - * ____________ - * | | - * V | - * ___ ___ | - * | |->| |->| - * |___| |___| - * | | - * |______________ - * | | - * V V - * _________________________________________ - * | | | | | | | - * | | | | | | | - * |______|______|______|______|______|______| + * fsl_dma_hw_params: continue initializing the DMA links * - * The first link descriptor now points to the third period. The DMA - * controller is currently playing the second period. When it finishes, it - * will jump back to the first descriptor and play the third period. - * - * There are four reasons we do this: - * - * 1. The only way to get the DMA controller to automatically restart the - * transfer when it gets to the end of the buffer is to use chaining - * mode. Basic direct mode doesn't offer that feature. - * 2. We need to receive an interrupt at the end of every period. The DMA - * controller can generate an interrupt at the end of every link transfer - * (aka segment). Making each period into a DMA segment will give us the - * interrupts we need. - * 3. By creating only two link descriptors, regardless of the number of - * periods, we do not need to reallocate the link descriptors if the - * number of periods changes. - * 4. All of the audio data is still stored in a single, contiguous DMA - * buffer, which is what ALSA expects. We're just dividing it into - * contiguous parts, and creating a link descriptor for each one. + * This function obtains hardware parameters about the opened stream and + * programs the DMA controller accordingly. * * Note that due to a quirk of the SSI's STX register, the target address * for the DMA operations depends on the sample size. So we don't program @@ -468,11 +535,8 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, { struct snd_pcm_runtime *runtime = substream->runtime; struct fsl_dma_private *dma_private = runtime->private_data; - struct ccsr_dma_channel __iomem *dma_channel = dma_private->dma_channel; dma_addr_t temp_addr; /* Pointer to next period */ - u64 temp_link; /* Pointer to next link descriptor */ - u32 mr; /* Temporary variable for MR register */ unsigned int i; @@ -490,8 +554,6 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, dma_private->dma_buf_next = dma_private->dma_buf_phys; /* - * Initialize each link descriptor. - * * The actual address in STX0 (destination for playback, source for * capture) is based on the sample size, but we don't know the sample * size in this function, so we'll have to adjust that later. See @@ -507,16 +569,11 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, * buffer itself. */ temp_addr = substream->dma_buffer.addr; - temp_link = dma_private->ld_buf_phys + - sizeof(struct fsl_dma_link_descriptor); for (i = 0; i < NUM_DMA_LINKS; i++) { struct fsl_dma_link_descriptor *link = &dma_private->link[i]; link->count = cpu_to_be32(period_size); - link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); - link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); - link->next = cpu_to_be64(temp_link); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) link->source_addr = cpu_to_be32(temp_addr); @@ -524,51 +581,7 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, link->dest_addr = cpu_to_be32(temp_addr); temp_addr += period_size; - temp_link += sizeof(struct fsl_dma_link_descriptor); } - /* The last link descriptor points to the first */ - dma_private->link[i - 1].next = cpu_to_be64(dma_private->ld_buf_phys); - - /* Tell the DMA controller where the first link descriptor is */ - out_be32(&dma_channel->clndar, - CCSR_DMA_CLNDAR_ADDR(dma_private->ld_buf_phys)); - out_be32(&dma_channel->eclndar, - CCSR_DMA_ECLNDAR_ADDR(dma_private->ld_buf_phys)); - - /* The manual says the BCR must be clear before enabling EMP */ - out_be32(&dma_channel->bcr, 0); - - /* - * Program the mode register for interrupts, external master control, - * and source/destination hold. Also clear the Channel Abort bit. - */ - mr = in_be32(&dma_channel->mr) & - ~(CCSR_DMA_MR_CA | CCSR_DMA_MR_DAHE | CCSR_DMA_MR_SAHE); - - /* - * We want External Master Start and External Master Pause enabled, - * because the SSI is controlling the DMA controller. We want the DMA - * controller to be set up in advance, and then we signal only the SSI - * to start transfering. - * - * We want End-Of-Segment Interrupts enabled, because this will generate - * an interrupt at the end of each segment (each link descriptor - * represents one segment). Each DMA segment is the same thing as an - * ALSA period, so this is how we get an interrupt at the end of every - * period. - * - * We want Error Interrupt enabled, so that we can get an error if - * the DMA controller is mis-programmed somehow. - */ - mr |= CCSR_DMA_MR_EOSIE | CCSR_DMA_MR_EIE | CCSR_DMA_MR_EMP_EN | - CCSR_DMA_MR_EMS_EN; - - /* For playback, we want the destination address to be held. For - capture, set the source address to be held. */ - mr |= (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? - CCSR_DMA_MR_DAHE : CCSR_DMA_MR_SAHE; - - out_be32(&dma_channel->mr, mr); return 0; } -- cgit v1.2.3 From 9b3cbf725fb98733976fd02e2e557f0ae3028df0 Mon Sep 17 00:00:00 2001 From: Isaku Yamahata Date: Mon, 4 Aug 2008 12:02:28 +0900 Subject: [IA64] pv_ops: fix ivt.S paravirtualization Recent kernels are not booting on some HP systems (though it does boot on others). James and Willy reported the problem. James did the bisection to find the commit that caused the problem: 498c5170472ff0c03a29d22dbd33225a0be038f4. [IA64] pvops: paravirtualize ivt.S Two instructions were wrongly paravirtualized such that _FROM_ macro had been used where _TO_ was intended Cc: James Bottomley Cc: "Wilcox, Matthew R" Signed-off-by: Isaku Yamahata Signed-off-by: Tony Luck --- arch/ia64/kernel/ivt.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index c39627df3cde..416a952b19bd 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -1243,11 +1243,11 @@ ENTRY(speculation_vector) add r17=r17,r18 // now add the offset ;; - MOV_FROM_IIP(r17) + MOV_TO_IIP(r17, r19) dep r16=0,r16,41,2 // clear EI ;; - MOV_FROM_IPSR(p0, r16) + MOV_TO_IPSR(p0, r16, r19) ;; RFI -- cgit v1.2.3 From 3f44675439b136d51179d31eb5a498383cb38624 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 4 Aug 2008 11:02:14 -0700 Subject: RDMA/cma: Remove padding arrays by using struct sockaddr_storage There are a few places where the RDMA CM code handles IPv6 by doing struct sockaddr addr; u8 pad[sizeof(struct sockaddr_in6) - sizeof(struct sockaddr)]; This is fragile and ugly; handle this in a better way with just struct sockaddr_storage addr; [ Also roll in patch from Aleksey Senin to switch to struct sockaddr_storage and get rid of padding arrays in struct rdma_addr. ] Signed-off-by: Roland Dreier --- drivers/infiniband/core/cma.c | 37 ++++++++++++++++++------------------- drivers/infiniband/core/ucma.c | 14 ++++++-------- include/rdma/rdma_cm.h | 8 ++------ 3 files changed, 26 insertions(+), 33 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index e980ff3335db..d951896ff7fc 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -155,9 +155,7 @@ struct cma_multicast { } multicast; struct list_head list; void *context; - struct sockaddr addr; - u8 pad[sizeof(struct sockaddr_in6) - - sizeof(struct sockaddr)]; + struct sockaddr_storage addr; }; struct cma_work { @@ -786,8 +784,8 @@ static void cma_cancel_operation(struct rdma_id_private *id_priv, cma_cancel_route(id_priv); break; case CMA_LISTEN: - if (cma_any_addr(&id_priv->id.route.addr.src_addr) && - !id_priv->cma_dev) + if (cma_any_addr((struct sockaddr *) &id_priv->id.route.addr.src_addr) + && !id_priv->cma_dev) cma_cancel_listens(id_priv); break; default: @@ -1026,7 +1024,7 @@ static struct rdma_id_private *cma_new_conn_id(struct rdma_cm_id *listen_id, rt->path_rec[1] = *ib_event->param.req_rcvd.alternate_path; ib_addr_set_dgid(&rt->addr.dev_addr, &rt->path_rec[0].dgid); - ret = rdma_translate_ip(&id->route.addr.src_addr, + ret = rdma_translate_ip((struct sockaddr *) &id->route.addr.src_addr, &id->route.addr.dev_addr); if (ret) goto destroy_id; @@ -1064,7 +1062,7 @@ static struct rdma_id_private *cma_new_udp_id(struct rdma_cm_id *listen_id, cma_save_net_info(&id->route.addr, &listen_id->route.addr, ip_ver, port, src, dst); - ret = rdma_translate_ip(&id->route.addr.src_addr, + ret = rdma_translate_ip((struct sockaddr *) &id->route.addr.src_addr, &id->route.addr.dev_addr); if (ret) goto err; @@ -1377,7 +1375,7 @@ static int cma_ib_listen(struct rdma_id_private *id_priv) if (IS_ERR(id_priv->cm_id.ib)) return PTR_ERR(id_priv->cm_id.ib); - addr = &id_priv->id.route.addr.src_addr; + addr = (struct sockaddr *) &id_priv->id.route.addr.src_addr; svc_id = cma_get_service_id(id_priv->id.ps, addr); if (cma_any_addr(addr)) ret = ib_cm_listen(id_priv->cm_id.ib, svc_id, 0, NULL); @@ -1443,7 +1441,7 @@ static void cma_listen_on_dev(struct rdma_id_private *id_priv, dev_id_priv->state = CMA_ADDR_BOUND; memcpy(&id->route.addr.src_addr, &id_priv->id.route.addr.src_addr, - ip_addr_size(&id_priv->id.route.addr.src_addr)); + ip_addr_size((struct sockaddr *) &id_priv->id.route.addr.src_addr)); cma_attach_to_dev(dev_id_priv, cma_dev); list_add_tail(&dev_id_priv->listen_list, &id_priv->listen_list); @@ -1563,13 +1561,14 @@ static int cma_query_ib_route(struct rdma_id_private *id_priv, int timeout_ms, path_rec.pkey = cpu_to_be16(ib_addr_get_pkey(&addr->dev_addr)); path_rec.numb_path = 1; path_rec.reversible = 1; - path_rec.service_id = cma_get_service_id(id_priv->id.ps, &addr->dst_addr); + path_rec.service_id = cma_get_service_id(id_priv->id.ps, + (struct sockaddr *) &addr->dst_addr); comp_mask = IB_SA_PATH_REC_DGID | IB_SA_PATH_REC_SGID | IB_SA_PATH_REC_PKEY | IB_SA_PATH_REC_NUMB_PATH | IB_SA_PATH_REC_REVERSIBLE | IB_SA_PATH_REC_SERVICE_ID; - if (addr->src_addr.sa_family == AF_INET) { + if (addr->src_addr.ss_family == AF_INET) { path_rec.qos_class = cpu_to_be16((u16) id_priv->tos); comp_mask |= IB_SA_PATH_REC_QOS_CLASS; } else { @@ -1848,7 +1847,7 @@ static int cma_resolve_loopback(struct rdma_id_private *id_priv) ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr, &gid); ib_addr_set_dgid(&id_priv->id.route.addr.dev_addr, &gid); - if (cma_zero_addr(&id_priv->id.route.addr.src_addr)) { + if (cma_zero_addr((struct sockaddr *) &id_priv->id.route.addr.src_addr)) { src_in = (struct sockaddr_in *)&id_priv->id.route.addr.src_addr; dst_in = (struct sockaddr_in *)&id_priv->id.route.addr.dst_addr; src_in->sin_family = dst_in->sin_family; @@ -1897,7 +1896,7 @@ int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr, if (cma_any_addr(dst_addr)) ret = cma_resolve_loopback(id_priv); else - ret = rdma_resolve_ip(&addr_client, &id->route.addr.src_addr, + ret = rdma_resolve_ip(&addr_client, (struct sockaddr *) &id->route.addr.src_addr, dst_addr, &id->route.addr.dev_addr, timeout_ms, addr_handler, id_priv); if (ret) @@ -2021,11 +2020,11 @@ static int cma_use_port(struct idr *ps, struct rdma_id_private *id_priv) * We don't support binding to any address if anyone is bound to * a specific address on the same port. */ - if (cma_any_addr(&id_priv->id.route.addr.src_addr)) + if (cma_any_addr((struct sockaddr *) &id_priv->id.route.addr.src_addr)) return -EADDRNOTAVAIL; hlist_for_each_entry(cur_id, node, &bind_list->owners, node) { - if (cma_any_addr(&cur_id->id.route.addr.src_addr)) + if (cma_any_addr((struct sockaddr *) &cur_id->id.route.addr.src_addr)) return -EADDRNOTAVAIL; cur_sin = (struct sockaddr_in *) &cur_id->id.route.addr.src_addr; @@ -2060,7 +2059,7 @@ static int cma_get_port(struct rdma_id_private *id_priv) } mutex_lock(&lock); - if (cma_any_port(&id_priv->id.route.addr.src_addr)) + if (cma_any_port((struct sockaddr *) &id_priv->id.route.addr.src_addr)) ret = cma_alloc_any_port(ps, id_priv); else ret = cma_use_port(ps, id_priv); @@ -2232,7 +2231,7 @@ static int cma_resolve_ib_udp(struct rdma_id_private *id_priv, req.path = route->path_rec; req.service_id = cma_get_service_id(id_priv->id.ps, - &route->addr.dst_addr); + (struct sockaddr *) &route->addr.dst_addr); req.timeout_ms = 1 << (CMA_CM_RESPONSE_TIMEOUT - 8); req.max_cm_retries = CMA_MAX_CM_RETRIES; @@ -2283,7 +2282,7 @@ static int cma_connect_ib(struct rdma_id_private *id_priv, req.alternate_path = &route->path_rec[1]; req.service_id = cma_get_service_id(id_priv->id.ps, - &route->addr.dst_addr); + (struct sockaddr *) &route->addr.dst_addr); req.qp_num = id_priv->qp_num; req.qp_type = IB_QPT_RC; req.starting_psn = id_priv->seq_num; @@ -2667,7 +2666,7 @@ static int cma_join_ib_multicast(struct rdma_id_private *id_priv, if (ret) return ret; - cma_set_mgid(id_priv, &mc->addr, &rec.mgid); + cma_set_mgid(id_priv, (struct sockaddr *) &mc->addr, &rec.mgid); if (id_priv->id.ps == RDMA_PS_UDP) rec.qkey = cpu_to_be32(RDMA_UDP_QKEY); ib_addr_get_sgid(dev_addr, &rec.port_gid); diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index b41dd26bbfa1..3ddacf39b7ba 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -81,9 +81,7 @@ struct ucma_multicast { u64 uid; struct list_head list; - struct sockaddr addr; - u8 pad[sizeof(struct sockaddr_in6) - - sizeof(struct sockaddr)]; + struct sockaddr_storage addr; }; struct ucma_event { @@ -603,11 +601,11 @@ static ssize_t ucma_query_route(struct ucma_file *file, return PTR_ERR(ctx); memset(&resp, 0, sizeof resp); - addr = &ctx->cm_id->route.addr.src_addr; + addr = (struct sockaddr *) &ctx->cm_id->route.addr.src_addr; memcpy(&resp.src_addr, addr, addr->sa_family == AF_INET ? sizeof(struct sockaddr_in) : sizeof(struct sockaddr_in6)); - addr = &ctx->cm_id->route.addr.dst_addr; + addr = (struct sockaddr *) &ctx->cm_id->route.addr.dst_addr; memcpy(&resp.dst_addr, addr, addr->sa_family == AF_INET ? sizeof(struct sockaddr_in) : sizeof(struct sockaddr_in6)); @@ -913,7 +911,7 @@ static ssize_t ucma_join_multicast(struct ucma_file *file, mc->uid = cmd.uid; memcpy(&mc->addr, &cmd.addr, sizeof cmd.addr); - ret = rdma_join_multicast(ctx->cm_id, &mc->addr, mc); + ret = rdma_join_multicast(ctx->cm_id, (struct sockaddr *) &mc->addr, mc); if (ret) goto err2; @@ -929,7 +927,7 @@ static ssize_t ucma_join_multicast(struct ucma_file *file, return 0; err3: - rdma_leave_multicast(ctx->cm_id, &mc->addr); + rdma_leave_multicast(ctx->cm_id, (struct sockaddr *) &mc->addr); ucma_cleanup_mc_events(mc); err2: mutex_lock(&mut); @@ -975,7 +973,7 @@ static ssize_t ucma_leave_multicast(struct ucma_file *file, goto out; } - rdma_leave_multicast(mc->ctx->cm_id, &mc->addr); + rdma_leave_multicast(mc->ctx->cm_id, (struct sockaddr *) &mc->addr); mutex_lock(&mc->ctx->file->mut); ucma_cleanup_mc_events(mc); list_del(&mc->list); diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h index df7faf09d66f..c6b2962315b3 100644 --- a/include/rdma/rdma_cm.h +++ b/include/rdma/rdma_cm.h @@ -71,12 +71,8 @@ enum rdma_port_space { }; struct rdma_addr { - struct sockaddr src_addr; - u8 src_pad[sizeof(struct sockaddr_in6) - - sizeof(struct sockaddr)]; - struct sockaddr dst_addr; - u8 dst_pad[sizeof(struct sockaddr_in6) - - sizeof(struct sockaddr)]; + struct sockaddr_storage src_addr; + struct sockaddr_storage dst_addr; struct rdma_dev_addr dev_addr; }; -- cgit v1.2.3 From 5f0f66b022ba607db0a083bf5cc13e4a4336e366 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 4 Aug 2008 11:04:42 -0700 Subject: RDMA/cxgb3: Fix QP capabilities - Set the stag0 and fastreg capability bits only for kernel qps. - QP_PRIV flag is no longer used, so don't set it. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/iwch_qp.c | 23 +++++++---------------- 1 file changed, 7 insertions(+), 16 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 9a3be3a9d5dc..893971612eda 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -879,20 +879,13 @@ static int rdma_init(struct iwch_dev *rhp, struct iwch_qp *qhp, (qhp->attr.mpa_attr.xmit_marker_enabled << 1) | (qhp->attr.mpa_attr.crc_enabled << 2); - /* - * XXX - The IWCM doesn't quite handle getting these - * attrs set before going into RTS. For now, just turn - * them on always... - */ -#if 0 - init_attr.qpcaps = qhp->attr.enableRdmaRead | - (qhp->attr.enableRdmaWrite << 1) | - (qhp->attr.enableBind << 2) | - (qhp->attr.enable_stag0_fastreg << 3) | - (qhp->attr.enable_stag0_fastreg << 4); -#else - init_attr.qpcaps = 0x1f; -#endif + init_attr.qpcaps = uP_RI_QP_RDMA_READ_ENABLE | + uP_RI_QP_RDMA_WRITE_ENABLE | + uP_RI_QP_BIND_ENABLE; + if (!qhp->ibqp.uobject) + init_attr.qpcaps |= uP_RI_QP_STAG0_ENABLE | + uP_RI_QP_FAST_REGISTER_ENABLE; + init_attr.tcp_emss = qhp->ep->emss; init_attr.ord = qhp->attr.max_ord; init_attr.ird = qhp->attr.max_ird; @@ -900,8 +893,6 @@ static int rdma_init(struct iwch_dev *rhp, struct iwch_qp *qhp, init_attr.qp_dma_size = (1UL << qhp->wq.size_log2); init_attr.rqe_count = iwch_rqes_posted(qhp); init_attr.flags = qhp->attr.mpa_attr.initiator ? MPA_INITIATOR : 0; - if (!qhp->ibqp.uobject) - init_attr.flags |= PRIV_QP; if (peer2peer) { init_attr.rtr_type = RTR_READ; if (init_attr.ord == 0 && qhp->attr.mpa_attr.initiator) -- cgit v1.2.3 From 1c355a6e80fd08e623416138631e240f431385f2 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 4 Aug 2008 11:05:43 -0700 Subject: RDMA/cxgb3: Fix up MW access rights - MWs don't have local read/write permissions. - Set the MW_BIND enabled bit if a MR has MW_BIND access. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/cxio_hal.c | 6 +++--- drivers/infiniband/hw/cxgb3/iwch_provider.h | 7 +++++++ drivers/infiniband/hw/cxgb3/iwch_qp.c | 2 +- 3 files changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c index f6d5747153a5..4dcf08b3fd83 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.c +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c @@ -725,9 +725,9 @@ static int __cxio_tpt_op(struct cxio_rdev *rdev_p, u32 reset_tpt_entry, V_TPT_STAG_TYPE(type) | V_TPT_PDID(pdid)); BUG_ON(page_size >= 28); tpt.flags_pagesize_qpid = cpu_to_be32(V_TPT_PERM(perm) | - F_TPT_MW_BIND_ENABLE | - V_TPT_ADDR_TYPE((zbva ? TPT_ZBTO : TPT_VATO)) | - V_TPT_PAGE_SIZE(page_size)); + ((perm & TPT_MW_BIND) ? F_TPT_MW_BIND_ENABLE : 0) | + V_TPT_ADDR_TYPE((zbva ? TPT_ZBTO : TPT_VATO)) | + V_TPT_PAGE_SIZE(page_size)); tpt.rsvd_pbl_addr = reset_tpt_entry ? 0 : cpu_to_be32(V_TPT_PBL_ADDR(PBL_OFF(rdev_p, pbl_addr)>>3)); tpt.len = cpu_to_be32(len); diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.h b/drivers/infiniband/hw/cxgb3/iwch_provider.h index f5ceca05c435..a237d49bdcc9 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.h +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.h @@ -293,9 +293,16 @@ static inline u32 iwch_ib_to_tpt_access(int acc) return (acc & IB_ACCESS_REMOTE_WRITE ? TPT_REMOTE_WRITE : 0) | (acc & IB_ACCESS_REMOTE_READ ? TPT_REMOTE_READ : 0) | (acc & IB_ACCESS_LOCAL_WRITE ? TPT_LOCAL_WRITE : 0) | + (acc & IB_ACCESS_MW_BIND ? TPT_MW_BIND : 0) | TPT_LOCAL_READ; } +static inline u32 iwch_ib_to_tpt_bind_access(int acc) +{ + return (acc & IB_ACCESS_REMOTE_WRITE ? TPT_REMOTE_WRITE : 0) | + (acc & IB_ACCESS_REMOTE_READ ? TPT_REMOTE_READ : 0); +} + enum iwch_mmid_state { IWCH_STAG_STATE_VALID, IWCH_STAG_STATE_INVALID diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 893971612eda..3e4585c2318a 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -565,7 +565,7 @@ int iwch_bind_mw(struct ib_qp *qp, wqe->bind.type = TPT_VATO; /* TBD: check perms */ - wqe->bind.perms = iwch_ib_to_tpt_access(mw_bind->mw_access_flags); + wqe->bind.perms = iwch_ib_to_tpt_bind_access(mw_bind->mw_access_flags); wqe->bind.mr_stag = cpu_to_be32(mw_bind->mr->lkey); wqe->bind.mw_stag = cpu_to_be32(mw->rkey); wqe->bind.mw_len = cpu_to_be32(mw_bind->length); -- cgit v1.2.3 From 94567ef16bf38e98a7de214694d327feb3ec42d4 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Mon, 4 Aug 2008 11:06:16 -0700 Subject: [IA64] Cleanup generated file not ignored by .gitignore arch/ia64/kernel/vmlinux.lds is a generated file. Tell git to ignore it. Signed-off-by: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/kernel/.gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/ia64/kernel/.gitignore b/arch/ia64/kernel/.gitignore index 98307759a3b8..21cb0da5ded8 100644 --- a/arch/ia64/kernel/.gitignore +++ b/arch/ia64/kernel/.gitignore @@ -1 +1,2 @@ gate.lds +vmlinux.lds -- cgit v1.2.3 From be43324d8b316fe83a7b4027334f2825f1121c2c Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 4 Aug 2008 11:08:37 -0700 Subject: RDMA/cxgb3: Fix deadlock initializing iw_cxgb3 device Running 'ifconfig up' on the cxgb3 interface with iw_cxgb3 loaded causes a deadlock. The rtnl lock is already held in this path. The function fw_supports_fastreg() was introduced in 2.6.27 to conditionally set the IB_DEVICE_MEM_MGT_EXTENSIONS bit iff the firmware was at 7.0 or greater, and this function also acquires the rtnl lock and which thus causes a deadlock. Further, if iw_cxgb3 is loaded _after_ the nic interface is brought up, then the deadlock does not occur and therefore fw_supports_fastreg() does need to grab the rtnl lock in that path. It turns out this code is all useless anyway. The low level driver will NOT allow the open if the firmware isn't 7.0, so iw_cxgb3 can always set the MEM_MGT_EXTENSIONS bit. Simplify... Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/iwch_provider.c | 28 +++------------------------- 1 file changed, 3 insertions(+), 25 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index b89640aa6e10..eb778bfd6f66 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -1187,28 +1187,6 @@ static ssize_t show_rev(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", iwch_dev->rdev.t3cdev_p->type); } -static int fw_supports_fastreg(struct iwch_dev *iwch_dev) -{ - struct ethtool_drvinfo info; - struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; - char *cp, *next; - unsigned fw_maj, fw_min; - - rtnl_lock(); - lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); - - next = info.fw_version+1; - cp = strsep(&next, "."); - sscanf(cp, "%i", &fw_maj); - cp = strsep(&next, "."); - sscanf(cp, "%i", &fw_min); - - PDBG("%s maj %u min %u\n", __func__, fw_maj, fw_min); - - return fw_maj > 6 || (fw_maj == 6 && fw_min > 0); -} - static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, char *buf) { struct iwch_dev *iwch_dev = container_of(dev, struct iwch_dev, @@ -1325,12 +1303,12 @@ int iwch_register_device(struct iwch_dev *dev) memset(&dev->ibdev.node_guid, 0, sizeof(dev->ibdev.node_guid)); memcpy(&dev->ibdev.node_guid, dev->rdev.t3cdev_p->lldev->dev_addr, 6); dev->ibdev.owner = THIS_MODULE; - dev->device_cap_flags = IB_DEVICE_LOCAL_DMA_LKEY | IB_DEVICE_MEM_WINDOW; + dev->device_cap_flags = IB_DEVICE_LOCAL_DMA_LKEY | + IB_DEVICE_MEM_WINDOW | + IB_DEVICE_MEM_MGT_EXTENSIONS; /* cxgb3 supports STag 0. */ dev->ibdev.local_dma_lkey = 0; - if (fw_supports_fastreg(dev)) - dev->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS; dev->ibdev.uverbs_cmd_mask = (1ull << IB_USER_VERBS_CMD_GET_CONTEXT) | -- cgit v1.2.3 From d1339df1f46d10e0396c1470f371b0d1b23295ba Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Sat, 2 Aug 2008 13:29:24 -0500 Subject: [IA64] Allow ia64 to CONFIG_NR_CPUS up to 4096 ia64 has compiled with NR_CPUS=4096 for a couple releases, just forgot to update Kconfig to allow it. Signed-off-by: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 451f2ffb137b..977895893ed5 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -321,10 +321,10 @@ config SMP If you don't know what to do here, say N. config NR_CPUS - int "Maximum number of CPUs (2-1024)" - range 2 1024 + int "Maximum number of CPUs (2-4096)" + range 2 4096 depends on SMP - default "1024" + default "4096" help You should set this to the number of CPUs in your system, but keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but -- cgit v1.2.3 From ac0af91ebcaedc1a9e1d2987ecbd22837924e6b9 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Sat, 2 Aug 2008 13:32:06 -0500 Subject: [IA64] update generic_defconfig for 2.6.27-rc1 This patch updates the generic_defconfig for 2.6.27-rc1 by simply doing a make oldconfig and holding down the carriage return. Signed-off-by: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/configs/generic_defconfig | 503 +++++++++++++++++++++--------------- 1 file changed, 293 insertions(+), 210 deletions(-) diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 0210545e7f61..3ad1a464fd41 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -1,20 +1,16 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22 -# Thu Jul 19 13:55:32 2007 +# Linux kernel version: 2.6.27-rc1 +# Fri Aug 1 19:33:14 2008 # CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y @@ -23,20 +19,27 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=20 -# CONFIG_CPUSETS is not set +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -44,6 +47,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -53,12 +57,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y @@ -68,6 +90,8 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -81,6 +105,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Processor type and features @@ -91,12 +116,16 @@ CONFIG_ZONE_DMA=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_DMI=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y @@ -107,6 +136,7 @@ CONFIG_IA64_GENERIC=y # CONFIG_IA64_HP_ZX1 is not set # CONFIG_IA64_HP_ZX1_SWIOTLB is not set # CONFIG_IA64_SGI_SN2 is not set +# CONFIG_IA64_SGI_UV is not set # CONFIG_IA64_HP_SIM is not set # CONFIG_ITANIUM is not set CONFIG_MCKINLEY=y @@ -116,22 +146,26 @@ CONFIG_MCKINLEY=y CONFIG_IA64_PAGE_SIZE_64KB=y CONFIG_PGTABLE_3=y # CONFIG_PGTABLE_4 is not set +CONFIG_HZ=250 # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set -CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_IA64_L1_CACHE_SHIFT=7 CONFIG_IA64_CYCLONE=y CONFIG_IOSAPIC=y -# CONFIG_IA64_SGI_SN_XP is not set CONFIG_FORCE_MAX_ZONEORDER=17 +# CONFIG_VIRT_CPU_ACCOUNTING is not set CONFIG_SMP=y CONFIG_NR_CPUS=512 CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_SCHED_SMT is not set # CONFIG_PERMIT_BSP_REMOVE is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set @@ -141,6 +175,8 @@ CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y @@ -148,6 +184,7 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y +CONFIG_MMU_NOTIFIER=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -162,12 +199,14 @@ CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y +CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y # CONFIG_IA64_MC_ERR_INJECT is not set CONFIG_SGI_SN=y # CONFIG_IA64_ESI is not set +# CONFIG_IA64_HP_AML_NFW is not set # # SN Devices @@ -179,6 +218,7 @@ CONFIG_CRASH_DUMP=y # # Firmware Drivers # +# CONFIG_FIRMWARE_MEMMAP is not set CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y CONFIG_DMIID=y @@ -189,14 +229,12 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y -CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set - -# -# ACPI (Advanced Configuration and Power Interface) Support -# CONFIG_ACPI=y CONFIG_ACPI_PROCFS=y +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m # CONFIG_ACPI_DOCK is not set @@ -204,9 +242,11 @@ CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y +# CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y +# CONFIG_ACPI_PCI_SLOT is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -225,6 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_FAKE is not set @@ -233,15 +274,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m # CONFIG_HOTPLUG_PCI_CPCI is not set # CONFIG_HOTPLUG_PCI_SHPC is not set # CONFIG_HOTPLUG_PCI_SGI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set - -# -# Networking -# CONFIG_NET=y # @@ -254,6 +287,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -273,6 +307,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -280,8 +315,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -298,10 +331,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -309,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -330,9 +360,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -360,25 +393,35 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_SGI_IOC4=y # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_SGI_XP is not set +# CONFIG_HP_ILO is not set +CONFIG_SGI_GRU=m +# CONFIG_SGI_GRU_DEBUG is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEFLOPPY=y CONFIG_BLK_DEV_IDESCSI=m @@ -390,25 +433,26 @@ CONFIG_IDE_PROC_FS=y # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEPNP is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -425,10 +469,7 @@ CONFIG_BLK_DEV_SGIIOC4=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -468,10 +509,8 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -481,6 +520,8 @@ CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -491,6 +532,7 @@ CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 @@ -505,6 +547,7 @@ CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m @@ -522,36 +565,52 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -# CONFIG_DM_MULTIPATH_EMC is not set -# CONFIG_DM_MULTIPATH_RDAC is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=m CONFIG_FUSION_SAS=y CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set +# CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set @@ -569,13 +628,16 @@ CONFIG_TULIP=m # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set CONFIG_EEPRO100=m CONFIG_E100=m # CONFIG_FEALNX is not set @@ -583,17 +645,21 @@ CONFIG_E100=m # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -606,14 +672,20 @@ CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -621,6 +693,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -629,7 +702,6 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -637,8 +709,8 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y @@ -660,7 +732,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -709,9 +780,11 @@ CONFIG_GAMEPORT=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set @@ -719,15 +792,16 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set -# CONFIG_MOXA_SMARTIO_NEW is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set # CONFIG_RIO is not set # CONFIG_STALDRV is not set +# CONFIG_NOZOMI is not set CONFIG_SGI_SNSC=y CONFIG_SGI_TIOCX=y CONFIG_SGI_MBCS=m @@ -759,76 +833,100 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set CONFIG_EFI_RTC=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -CONFIG_AGP=m -CONFIG_AGP_I460=m -CONFIG_AGP_HP_ZX1=m -CONFIG_AGP_SGI_TIOCA=m -CONFIG_DRM=m -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -CONFIG_DRM_MGA=m -CONFIG_DRM_SIS=m -# CONFIG_DRM_VIA is not set -# CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y -# CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y # CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_THERMAL=m +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # +CONFIG_AGP=m +CONFIG_AGP_I460=m +CONFIG_AGP_HP_ZX1=m +CONFIG_AGP_SGI_TIOCA=m +CONFIG_DRM=m +CONFIG_DRM_TDFX=m +CONFIG_DRM_R128=m +CONFIG_DRM_RADEON=m +CONFIG_DRM_MGA=m +CONFIG_DRM_SIS=m +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support @@ -836,15 +934,7 @@ CONFIG_DAB=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -862,22 +952,18 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -886,10 +972,12 @@ CONFIG_SND_MPU401=m # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y @@ -912,10 +1000,10 @@ CONFIG_SND_EMU10K1=m # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set CONFIG_SND_FM801=m -# CONFIG_SND_FM801_TEA575X_BOOL is not set # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -933,29 +1021,19 @@ CONFIG_SND_FM801=m # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -976,6 +1054,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -984,17 +1063,17 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1008,6 +1087,7 @@ CONFIG_USB_UHCI_HCD=m # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1027,7 +1107,9 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1040,10 +1122,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1069,65 +1147,30 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# +# CONFIG_ACCESSIBILITY is not set CONFIG_INFINIBAND=m # CONFIG_INFINIBAND_USER_MAD is not set # CONFIG_INFINIBAND_USER_ACCESS is not set CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y +# CONFIG_INFINIBAND_IPATH is not set # CONFIG_INFINIBAND_AMSO1100 is not set # CONFIG_MLX4_INFINIBAND is not set +# CONFIG_INFINIBAND_NES is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_CM is not set CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set # CONFIG_INFINIBAND_SRP is not set # CONFIG_INFINIBAND_ISER is not set - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_MSPEC is not set @@ -1145,7 +1188,6 @@ CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set @@ -1157,17 +1199,15 @@ CONFIG_REISERFS_FS_SECURITY=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1205,7 +1245,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1220,32 +1259,30 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_SUNRPC_XPRT_RDMA=m +CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y @@ -1281,10 +1318,6 @@ CONFIG_SGI_PARTITION=y # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1325,19 +1358,20 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set +CONFIG_HAVE_KVM=y +CONFIG_VIRTUALIZATION=y +# CONFIG_KVM is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set @@ -1357,17 +1391,13 @@ CONFIG_IRQ_PER_CPU=y # CONFIG_HP_SIMSERIAL is not set # CONFIG_HP_SIMSCSI is not set -# -# Instrumentation Support -# -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set - # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1375,10 +1405,14 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1388,10 +1422,15 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set @@ -1405,41 +1444,85 @@ CONFIG_SYSVIPC_COMPAT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set -- cgit v1.2.3 From 70117b9e866b1fdf7e4e84ffb6f38a7b3e9702f8 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Mon, 4 Aug 2008 11:12:18 -0700 Subject: IB/ipath: Fix printk format warnings ipath_driver.c:1260: warning: format '%Lx' expects type 'long long unsigned int', but argument 6 has type 'long unsigned int' ipath_driver.c:1459: warning: format '%Lx' expects type 'long long unsigned int', but argument 4 has type 'u64' ipath_intr.c:358: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_intr.c:358: warning: format '%Lu' expects type 'long long unsigned int', but argument 6 has type 'u64' ipath_intr.c:1119: warning: format '%Lx' expects type 'long long unsigned int', but argument 5 has type 'u64' ipath_intr.c:1119: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_intr.c:1123: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_intr.c:1130: warning: format '%Lx' expects type 'long long unsigned int', but argument 4 has type 'u64' ipath_iba7220.c:1032: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' ipath_iba7220.c:1045: warning: format '%llX' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_iba7220.c:2506: warning: format '%Lu' expects type 'long long unsigned int', but argument 4 has type 'u64' Signed-off-by: Alexander Beregalov Cc: Sean Hefty Cc: Hal Rosenstock Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_driver.c | 5 +++-- drivers/infiniband/hw/ipath/ipath_iba7220.c | 7 ++++--- drivers/infiniband/hw/ipath/ipath_intr.c | 12 ++++++++---- 3 files changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index daad09a45910..ad0aab60b051 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -1259,7 +1259,7 @@ reloop: */ ipath_cdbg(ERRPKT, "Error Pkt, but no eflags! egrbuf" " %x, len %x hdrq+%x rhf: %Lx\n", - etail, tlen, l, + etail, tlen, l, (unsigned long long) le64_to_cpu(*(__le64 *) rhf_addr)); if (ipath_debug & __IPATH_ERRPKTDBG) { u32 j, *d, dw = rsize-2; @@ -1457,7 +1457,8 @@ static void ipath_reset_availshadow(struct ipath_devdata *dd) 0xaaaaaaaaaaaaaaaaULL); /* All BUSY bits in qword */ if (oldval != dd->ipath_pioavailshadow[i]) ipath_dbg("shadow[%d] was %Lx, now %lx\n", - i, oldval, dd->ipath_pioavailshadow[i]); + i, (unsigned long long) oldval, + dd->ipath_pioavailshadow[i]); } spin_unlock_irqrestore(&ipath_pioavail_lock, flags); } diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c index fb70712ac85c..85b2cd03c4e4 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba7220.c +++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c @@ -1032,7 +1032,7 @@ static int ipath_7220_bringup_serdes(struct ipath_devdata *dd) ipath_cdbg(VERBOSE, "done: xgxs=%llx from %llx\n", (unsigned long long) ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig), - prev_val); + (unsigned long long) prev_val); guid = be64_to_cpu(dd->ipath_guid); @@ -1042,7 +1042,8 @@ static int ipath_7220_bringup_serdes(struct ipath_devdata *dd) ipath_dbg("No GUID for heartbeat, faking %llx\n", (unsigned long long)guid); } else - ipath_cdbg(VERBOSE, "Wrote %llX to HRTBT_GUID\n", guid); + ipath_cdbg(VERBOSE, "Wrote %llX to HRTBT_GUID\n", + (unsigned long long) guid); ipath_write_kreg(dd, dd->ipath_kregs->kr_hrtbt_guid, guid); return ret; } @@ -2505,7 +2506,7 @@ done: if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) { ipath_dbg("Did not get to DDR INIT (%x) after %Lu msecs\n", ipath_ib_state(dd, dd->ipath_lastibcstat), - jiffies_to_msecs(jiffies)-startms); + (unsigned long long) jiffies_to_msecs(jiffies)-startms); dd->ipath_flags &= ~IPATH_IB_AUTONEG_INPROG; if (dd->ipath_autoneg_tries == IPATH_AUTONEG_TRIES) { dd->ipath_flags |= IPATH_IB_AUTONEG_FAILED; diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c index 26900b3b7a4e..6c21b4b5ec71 100644 --- a/drivers/infiniband/hw/ipath/ipath_intr.c +++ b/drivers/infiniband/hw/ipath/ipath_intr.c @@ -356,9 +356,10 @@ static void handle_e_ibstatuschanged(struct ipath_devdata *dd, dd->ipath_cregs->cr_iblinkerrrecovcnt); if (linkrecov != dd->ipath_lastlinkrecov) { ipath_dbg("IB linkrecov up %Lx (%s %s) recov %Lu\n", - ibcs, ib_linkstate(dd, ibcs), + (unsigned long long) ibcs, + ib_linkstate(dd, ibcs), ipath_ibcstatus_str[ltstate], - linkrecov); + (unsigned long long) linkrecov); /* and no more until active again */ dd->ipath_lastlinkrecov = 0; ipath_set_linkstate(dd, IPATH_IB_LINKDOWN); @@ -1118,9 +1119,11 @@ irqreturn_t ipath_intr(int irq, void *data) if (unlikely(istat & ~dd->ipath_i_bitsextant)) ipath_dev_err(dd, "interrupt with unknown interrupts %Lx set\n", + (unsigned long long) istat & ~dd->ipath_i_bitsextant); else if (istat & ~INFINIPATH_I_ERROR) /* errors do own printing */ - ipath_cdbg(VERBOSE, "intr stat=0x%Lx\n", istat); + ipath_cdbg(VERBOSE, "intr stat=0x%Lx\n", + (unsigned long long) istat); if (istat & INFINIPATH_I_ERROR) { ipath_stats.sps_errints++; @@ -1128,7 +1131,8 @@ irqreturn_t ipath_intr(int irq, void *data) dd->ipath_kregs->kr_errorstatus); if (!estat) dev_info(&dd->pcidev->dev, "error interrupt (%Lx), " - "but no error bits set!\n", istat); + "but no error bits set!\n", + (unsigned long long) istat); else if (estat == -1LL) /* * should we try clearing all, or hope next read -- cgit v1.2.3 From ceffacc1d6041392d1b47750b14bf6845c2372ab Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Sat, 2 Aug 2008 13:35:27 -0500 Subject: [IA64] update generic_defconfig to support sn2. This patch changes the generic_defconfig so it works on all sn2 platforms I have access to. There is only one support configuration which was not tested and that configuration is only a combination of two tested configurations. With this patchset applied, a generic kernel can be booted on either a RHEL 5.2, RHEL5.3, or SLES10 SP1 root and operate. All features needed by SGI's ProPack are also working. I have not tested all features of RHEL or SLES, but they do at least boot. Signed-off-by: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/configs/generic_defconfig | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 3ad1a464fd41..133089be5f2e 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.27-rc1 -# Fri Aug 1 19:33:14 2008 +# Sat Aug 2 13:24:08 2008 # CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -23,10 +23,17 @@ CONFIG_POSIX_MQUEUE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=20 -# CONFIG_CGROUPS is not set +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_NS is not set +# CONFIG_CGROUP_DEVICE is not set +CONFIG_CPUSETS=y # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUP_CPUACCT is not set +# CONFIG_RESOURCE_COUNTERS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_PROC_PID_CPUSET=y # CONFIG_RELAY is not set CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set @@ -130,6 +137,7 @@ CONFIG_DMI=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_IA64_UNCACHED_ALLOCATOR=y CONFIG_AUDIT_ARCH=y CONFIG_IA64_GENERIC=y # CONFIG_IA64_DIG is not set @@ -158,7 +166,7 @@ CONFIG_IOSAPIC=y CONFIG_FORCE_MAX_ZONEORDER=17 # CONFIG_VIRT_CPU_ACCOUNTING is not set CONFIG_SMP=y -CONFIG_NR_CPUS=512 +CONFIG_NR_CPUS=4096 CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -369,7 +377,8 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y @@ -403,7 +412,7 @@ CONFIG_MISC_DEVICES=y CONFIG_SGI_IOC4=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_SGI_XP is not set +CONFIG_SGI_XP=m # CONFIG_HP_ILO is not set CONFIG_SGI_GRU=m # CONFIG_SGI_GRU_DEBUG is not set @@ -1172,7 +1181,7 @@ CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set -# CONFIG_MSPEC is not set +CONFIG_MSPEC=m # # File systems @@ -1375,6 +1384,7 @@ CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_ALLOCATOR=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -- cgit v1.2.3 From 3351ab9b345ba5c2872acbf718cc631df72d3732 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Thu, 31 Jul 2008 07:52:50 -0500 Subject: [IA64] Eliminate trailing backquote in IA64_SGI_UV Eliminate trailing backquote in IA64_SGI_UV config. Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 977895893ed5..48e496fe1e75 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -171,8 +171,8 @@ config IA64_SGI_SN2 to select this option. If in doubt, select ia64 generic support instead. -config IA64_SGI_UV` - bool "SGI-UV`" +config IA64_SGI_UV + bool "SGI-UV" select NUMA select ACPI_NUMA select SWIOTLB -- cgit v1.2.3 From ca579617d81baf5865498eb5fae58e453ee77c2c Mon Sep 17 00:00:00 2001 From: Mohamed Abbas Date: Fri, 18 Jul 2008 13:52:57 +0800 Subject: iwlwifi: add power save to 5000 HW This patch adds support for power save for 5000 HW. Signed-off-by: Mohamed Abbas Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 13 ------------- drivers/net/wireless/iwlwifi/iwl-5000.c | 1 + drivers/net/wireless/iwlwifi/iwl-commands.h | 4 ++-- drivers/net/wireless/iwlwifi/iwl-core.h | 1 - drivers/net/wireless/iwlwifi/iwl-dev.h | 3 ++- drivers/net/wireless/iwlwifi/iwl-power.c | 18 ++++++++++++------ drivers/net/wireless/iwlwifi/iwl-power.h | 2 +- 7 files changed, 18 insertions(+), 24 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index ba2df1ba32d2..ea23c7629575 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -875,18 +875,6 @@ static int iwl4965_hw_set_hw_params(struct iwl_priv *priv) return 0; } -/* set card power command */ -static int iwl4965_set_power(struct iwl_priv *priv, - void *cmd) -{ - int ret = 0; - - ret = iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD, - sizeof(struct iwl4965_powertable_cmd), - cmd, NULL); - return ret; -} - static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res) { s32 sign = 1; @@ -2440,7 +2428,6 @@ static struct iwl_lib_ops iwl4965_lib = { .check_version = iwl4965_eeprom_check_version, .query_addr = iwlcore_eeprom_query_addr, }, - .set_power = iwl4965_set_power, .send_tx_power = iwl4965_send_tx_power, .update_chain_flags = iwl4965_update_chain_flags, .temperature = iwl4965_temperature_calib, diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 878d6193b232..f91c54b5ff53 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1474,6 +1474,7 @@ static struct iwl_lib_ops iwl5000_lib = { .alive_notify = iwl5000_alive_notify, .send_tx_power = iwl5000_send_tx_power, .temperature = iwl5000_temperature, + .update_chain_flags = iwl4965_update_chain_flags, .apm_ops = { .init = iwl5000_apm_init, .reset = iwl5000_apm_reset, diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index e9bb1de0ce3f..6f3555ffe527 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -1993,7 +1993,7 @@ struct iwl4965_spectrum_notification { *****************************************************************************/ /** - * struct iwl4965_powertable_cmd - Power Table Command + * struct iwl_powertable_cmd - Power Table Command * @flags: See below: * * POWER_TABLE_CMD = 0x77 (command, has simple generic response) @@ -2027,7 +2027,7 @@ struct iwl4965_spectrum_notification { #define IWL_POWER_PCI_PM_MSK __constant_cpu_to_le16(1 << 3) #define IWL_POWER_FAST_PD __constant_cpu_to_le16(1 << 4) -struct iwl4965_powertable_cmd { +struct iwl_powertable_cmd { __le16 flags; u8 keep_alive_seconds; u8 debug_flags; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index db66114f1e56..eaefa42f37c5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -139,7 +139,6 @@ struct iwl_lib_ops { int (*set_pwr_src)(struct iwl_priv *priv, enum iwl_pwr_src src); } apm_ops; /* power */ - int (*set_power)(struct iwl_priv *priv, void *cmd); int (*send_tx_power) (struct iwl_priv *priv); void (*update_chain_flags)(struct iwl_priv *priv); void (*temperature) (struct iwl_priv *priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 4d789e353e3a..010ed69e0e50 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -283,7 +283,7 @@ struct iwl_cmd { u32 val32; struct iwl4965_bt_cmd bt; struct iwl4965_rxon_time_cmd rxon_time; - struct iwl4965_powertable_cmd powertable; + struct iwl_powertable_cmd powertable; struct iwl_qosparam_cmd qosparam; struct iwl_tx_cmd tx; struct iwl4965_tx_beacon_cmd tx_beacon; @@ -590,6 +590,7 @@ extern unsigned int iwl4965_fill_beacon_frame(struct iwl_priv *priv, const u8 *dest, int left); extern void iwl4965_update_chain_flags(struct iwl_priv *priv); int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src); +extern int iwl4965_set_power(struct iwl_priv *priv, void *cmd); extern const u8 iwl_bcast_addr[ETH_ALEN]; diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c index 2e71803e09ba..e3c71beb01ef 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.c +++ b/drivers/net/wireless/iwlwifi/iwl-power.c @@ -112,6 +112,13 @@ static struct iwl_power_vec_entry range_2[IWL_POWER_AC] = { {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0} }; +/* set card power command */ +static int iwl_set_power(struct iwl_priv *priv, void *cmd) +{ + return iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD, + sizeof(struct iwl_powertable_cmd), + cmd, NULL); +} /* decide the right power level according to association status * and battery status */ @@ -162,7 +169,7 @@ static int iwl_power_init_handle(struct iwl_priv *priv) if (ret != 0) return 0; else { - struct iwl4965_powertable_cmd *cmd; + struct iwl_powertable_cmd *cmd; IWL_DEBUG_POWER("adjust power command flags\n"); @@ -180,7 +187,7 @@ static int iwl_power_init_handle(struct iwl_priv *priv) /* adjust power command according to dtim period and power level*/ static int iwl_update_power_command(struct iwl_priv *priv, - struct iwl4965_powertable_cmd *cmd, + struct iwl_powertable_cmd *cmd, u16 mode) { int ret = 0, i; @@ -204,7 +211,7 @@ static int iwl_update_power_command(struct iwl_priv *priv, range = &pow_data->pwr_range_2[0]; period = pow_data->dtim_period; - memcpy(cmd, &range[mode].cmd, sizeof(struct iwl4965_powertable_cmd)); + memcpy(cmd, &range[mode].cmd, sizeof(struct iwl_powertable_cmd)); if (period == 0) { period = 1; @@ -280,7 +287,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh) if (!iwl_is_rfkill(priv) && !setting->power_disabled && ((setting->power_mode != final_mode) || refresh)) { - struct iwl4965_powertable_cmd cmd; + struct iwl_powertable_cmd cmd; if (final_mode != IWL_POWER_MODE_CAM) set_bit(STATUS_POWER_PMI, &priv->status); @@ -291,8 +298,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh) if (final_mode == IWL_POWER_INDEX_5) cmd.flags |= IWL_POWER_FAST_PD; - if (priv->cfg->ops->lib->set_power) - ret = priv->cfg->ops->lib->set_power(priv, &cmd); + ret = iwl_set_power(priv, &cmd); if (final_mode == IWL_POWER_MODE_CAM) clear_bit(STATUS_POWER_PMI, &priv->status); diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h index b066724a1c2b..801f6143a42c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.h +++ b/drivers/net/wireless/iwlwifi/iwl-power.h @@ -46,7 +46,7 @@ struct iwl_priv; /* Power management (not Tx power) structures */ struct iwl_power_vec_entry { - struct iwl4965_powertable_cmd cmd; + struct iwl_powertable_cmd cmd; u8 no_dtim; }; -- cgit v1.2.3 From 298df1f62aa69881528bf0f1c3c14395bc447846 Mon Sep 17 00:00:00 2001 From: Esti Kummer Date: Fri, 18 Jul 2008 13:52:58 +0800 Subject: iwlwifi: corrects power_level in sysfs This patch corrects power_level in sysfs. Signed-off-by: Esti Kummer Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-power.c | 27 ++++++++----- drivers/net/wireless/iwlwifi/iwl-power.h | 31 +++++++++----- drivers/net/wireless/iwlwifi/iwl4965-base.c | 63 +++++++++-------------------- 3 files changed, 58 insertions(+), 63 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c index e3c71beb01ef..028e3053c0ca 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.c +++ b/drivers/net/wireless/iwlwifi/iwl-power.c @@ -82,7 +82,7 @@ /* default power management (not Tx power) table values */ /* for tim 0-10 */ -static struct iwl_power_vec_entry range_0[IWL_POWER_AC] = { +static struct iwl_power_vec_entry range_0[IWL_POWER_MAX] = { {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0}, @@ -93,7 +93,7 @@ static struct iwl_power_vec_entry range_0[IWL_POWER_AC] = { /* for tim = 3-10 */ -static struct iwl_power_vec_entry range_1[IWL_POWER_AC] = { +static struct iwl_power_vec_entry range_1[IWL_POWER_MAX] = { {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0}, @@ -103,7 +103,7 @@ static struct iwl_power_vec_entry range_1[IWL_POWER_AC] = { }; /* for tim > 11 */ -static struct iwl_power_vec_entry range_2[IWL_POWER_AC] = { +static struct iwl_power_vec_entry range_2[IWL_POWER_MAX] = { {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0}, @@ -124,7 +124,7 @@ static int iwl_set_power(struct iwl_priv *priv, void *cmd) */ static u16 iwl_get_auto_power_mode(struct iwl_priv *priv) { - u16 mode = priv->power_data.user_power_setting; + u16 mode; switch (priv->power_data.user_power_setting) { case IWL_POWER_AUTO: @@ -136,12 +136,16 @@ static u16 iwl_get_auto_power_mode(struct iwl_priv *priv) else mode = IWL_POWER_ON_AC_DISASSOC; break; + /* FIXME: remove battery and ac from here */ case IWL_POWER_BATTERY: mode = IWL_POWER_INDEX_3; break; case IWL_POWER_AC: mode = IWL_POWER_MODE_CAM; break; + default: + mode = priv->power_data.user_power_setting; + break; } return mode; } @@ -151,7 +155,7 @@ static int iwl_power_init_handle(struct iwl_priv *priv) { int ret = 0, i; struct iwl_power_mgr *pow_data; - int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_AC; + int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_MAX; u16 pci_pm; IWL_DEBUG_POWER("Initialize power \n"); @@ -173,7 +177,7 @@ static int iwl_power_init_handle(struct iwl_priv *priv) IWL_DEBUG_POWER("adjust power command flags\n"); - for (i = 0; i < IWL_POWER_AC; i++) { + for (i = 0; i < IWL_POWER_MAX; i++) { cmd = &pow_data->pwr_range_0[i].cmd; if (pci_pm & 0x1) @@ -265,17 +269,18 @@ int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh) * else user level */ switch (setting->system_power_setting) { - case IWL_POWER_AUTO: + case IWL_POWER_SYS_AUTO: final_mode = iwl_get_auto_power_mode(priv); break; - case IWL_POWER_BATTERY: + case IWL_POWER_SYS_BATTERY: final_mode = IWL_POWER_INDEX_3; break; - case IWL_POWER_AC: + case IWL_POWER_SYS_AC: final_mode = IWL_POWER_MODE_CAM; break; default: - final_mode = setting->system_power_setting; + final_mode = IWL_POWER_INDEX_3; + WARN_ON(1); } if (setting->critical_power_setting > final_mode) @@ -394,7 +399,7 @@ void iwl_power_initialize(struct iwl_priv *priv) iwl_power_init_handle(priv); priv->power_data.user_power_setting = IWL_POWER_AUTO; priv->power_data.power_disabled = 0; - priv->power_data.system_power_setting = IWL_POWER_AUTO; + priv->power_data.system_power_setting = IWL_POWER_SYS_AUTO; priv->power_data.is_battery_active = 0; priv->power_data.power_disabled = 0; priv->power_data.critical_power_setting = 0; diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h index 801f6143a42c..abcbbf96a84e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.h +++ b/drivers/net/wireless/iwlwifi/iwl-power.h @@ -33,12 +33,25 @@ struct iwl_priv; -#define IWL_POWER_MODE_CAM 0x00 /* Continuously Aware Mode, always on */ -#define IWL_POWER_INDEX_3 0x03 -#define IWL_POWER_INDEX_5 0x05 -#define IWL_POWER_AC 0x06 -#define IWL_POWER_BATTERY 0x07 -#define IWL_POWER_AUTO 0x08 +enum { + IWL_POWER_MODE_CAM, /* Continuously Aware Mode, always on */ + IWL_POWER_INDEX_1, + IWL_POWER_INDEX_2, + IWL_POWER_INDEX_3, + IWL_POWER_INDEX_4, + IWL_POWER_INDEX_5, + IWL_POWER_AUTO, + IWL_POWER_MAX = IWL_POWER_AUTO, + IWL_POWER_AC, + IWL_POWER_BATTERY, +}; + +enum { + IWL_POWER_SYS_AUTO, + IWL_POWER_SYS_AC, + IWL_POWER_SYS_BATTERY, +}; + #define IWL_POWER_LIMIT 0x08 #define IWL_POWER_MASK 0x0F #define IWL_POWER_ENABLED 0x10 @@ -52,9 +65,9 @@ struct iwl_power_vec_entry { struct iwl_power_mgr { spinlock_t lock; - struct iwl_power_vec_entry pwr_range_0[IWL_POWER_AC]; - struct iwl_power_vec_entry pwr_range_1[IWL_POWER_AC]; - struct iwl_power_vec_entry pwr_range_2[IWL_POWER_AC]; + struct iwl_power_vec_entry pwr_range_0[IWL_POWER_MAX]; + struct iwl_power_vec_entry pwr_range_1[IWL_POWER_MAX]; + struct iwl_power_vec_entry pwr_range_2[IWL_POWER_MAX]; u32 dtim_period; /* final power level that used to calculate final power command */ u8 power_mode; diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 71f5da3fe5c4..2001b09738ff 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -3800,76 +3800,53 @@ static ssize_t store_power_level(struct device *d, const char *buf, size_t count) { struct iwl_priv *priv = dev_get_drvdata(d); - int rc; + int ret; int mode; mode = simple_strtoul(buf, NULL, 0); mutex_lock(&priv->mutex); if (!iwl_is_ready(priv)) { - rc = -EAGAIN; + ret = -EAGAIN; goto out; } - rc = iwl_power_set_user_mode(priv, mode); - if (rc) { + ret = iwl_power_set_user_mode(priv, mode); + if (ret) { IWL_DEBUG_MAC80211("failed setting power mode.\n"); goto out; } - rc = count; + ret = count; out: mutex_unlock(&priv->mutex); - return rc; + return ret; } -#define MAX_WX_STRING 80 - -/* Values are in microsecond */ -static const s32 timeout_duration[] = { - 350000, - 250000, - 75000, - 37000, - 25000, -}; -static const s32 period_duration[] = { - 400000, - 700000, - 1000000, - 1000000, - 1000000 -}; - static ssize_t show_power_level(struct device *d, struct device_attribute *attr, char *buf) { struct iwl_priv *priv = dev_get_drvdata(d); + int mode = priv->power_data.user_power_setting; + int system = priv->power_data.system_power_setting; int level = priv->power_data.power_mode; char *p = buf; - p += sprintf(p, "%d ", level); - switch (level) { - case IWL_POWER_MODE_CAM: - case IWL_POWER_AC: - p += sprintf(p, "(AC)"); + switch (system) { + case IWL_POWER_SYS_AUTO: + p += sprintf(p, "SYSTEM:auto"); break; - case IWL_POWER_BATTERY: - p += sprintf(p, "(BATTERY)"); + case IWL_POWER_SYS_AC: + p += sprintf(p, "SYSTEM:ac"); + break; + case IWL_POWER_SYS_BATTERY: + p += sprintf(p, "SYSTEM:battery"); break; - default: - p += sprintf(p, - "(Timeout %dms, Period %dms)", - timeout_duration[level - 1] / 1000, - period_duration[level - 1] / 1000); } -/* - if (!(priv->power_mode & IWL_POWER_ENABLED)) - p += sprintf(p, " OFF\n"); - else - p += sprintf(p, " \n"); -*/ - p += sprintf(p, " \n"); + + p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO)?"fixed":"auto"); + p += sprintf(p, "\tINDEX:%d", level); + p += sprintf(p, "\n"); return (p - buf + 1); } -- cgit v1.2.3 From 98f7dfd86cbbd377e2cbc293529681b914296f68 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Fri, 18 Jul 2008 13:52:59 +0800 Subject: mac80211: pass dtim_period to low level driver This patch adds the dtim_period in ieee80211_bss_conf, this allows the low level driver to know the dtim_period, and to plan power save accordingly. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 13 +++++++++++++ include/net/mac80211.h | 4 +++- net/mac80211/ieee80211_i.h | 1 + net/mac80211/mlme.c | 11 +++++++++++ 4 files changed, 28 insertions(+), 1 deletion(-) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index a1630ba0b87c..7f4df7c7659d 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -506,6 +506,19 @@ struct ieee80211_channel_sw_ie { u8 count; } __attribute__ ((packed)); +/** + * struct ieee80211_tim + * + * This structure refers to "Traffic Indication Map information element" + */ +struct ieee80211_tim_ie { + u8 dtim_count; + u8 dtim_period; + u8 bitmap_ctrl; + /* variable size: 1 - 251 bytes */ + u8 virtual_map[0]; +} __attribute__ ((packed)); + struct ieee80211_mgmt { __le16 frame_control; __le16 duration; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b52721008be8..9d99f2e0a204 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -177,9 +177,10 @@ enum ieee80211_bss_change { * @aid: association ID number, valid only when @assoc is true * @use_cts_prot: use CTS protection * @use_short_preamble: use 802.11b short preamble + * @dtim_period: num of beacons before the next DTIM, for PSM * @timestamp: beacon timestamp * @beacon_int: beacon interval - * @assoc_capability: capabbilities taken from assoc resp + * @assoc_capability: capabilities taken from assoc resp * @assoc_ht: association in HT mode * @ht_conf: ht capabilities * @ht_bss_conf: ht extended capabilities @@ -191,6 +192,7 @@ struct ieee80211_bss_conf { /* erp related data */ bool use_cts_prot; bool use_short_preamble; + u8 dtim_period; u16 beacon_int; u16 assoc_capability; u64 timestamp; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index a2e200f9811e..ec59345af65b 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -82,6 +82,7 @@ struct ieee80211_sta_bss { u8 bssid[ETH_ALEN]; u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 dtim_period; u16 capability; /* host byte order */ enum ieee80211_band band; int freq; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index acb04133a95d..591e6331c427 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -551,6 +551,7 @@ static void ieee80211_set_associated(struct net_device *dev, /* set timing information */ sdata->bss_conf.beacon_int = bss->beacon_int; sdata->bss_conf.timestamp = bss->timestamp; + sdata->bss_conf.dtim_period = bss->dtim_period; changed |= ieee80211_handle_bss_capability(sdata, bss); @@ -2688,6 +2689,16 @@ static void ieee80211_rx_bss_info(struct net_device *dev, bss->beacon_int = le16_to_cpu(mgmt->u.beacon.beacon_int); bss->capability = le16_to_cpu(mgmt->u.beacon.capab_info); + if (elems->tim) { + struct ieee80211_tim_ie *tim_ie = + (struct ieee80211_tim_ie *)elems->tim; + bss->dtim_period = tim_ie->dtim_period; + } + + /* set default value for buggy APs */ + if (!elems->tim || bss->dtim_period == 0) + bss->dtim_period = 1; + bss->supp_rates_len = 0; if (elems->supp_rates) { clen = IEEE80211_MAX_SUPP_RATES - bss->supp_rates_len; -- cgit v1.2.3 From ea95bba41e69c616bb1512cf59d22f33266b8568 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 18 Jul 2008 13:53:00 +0800 Subject: mac80211: make listen_interval be limited by low level driver This patch makes possible for a driver to specify maximal listen interval The possibility for user to configure listen interval is not implemented yet, currently the maximum provided by the driver or 1 is used. Mac80211 uses config handler to set listen interval for to the driver. Signed-off-by: Tomas Winkler Signed-off-by: Emmanuel Grumbach Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- include/net/mac80211.h | 9 ++++++++- net/mac80211/main.c | 5 +++++ net/mac80211/mlme.c | 6 ++++-- 3 files changed, 17 insertions(+), 3 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9d99f2e0a204..b397e4d984c7 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -432,6 +432,7 @@ enum ieee80211_conf_flags { * @radio_enabled: when zero, driver is required to switch off the radio. * TODO make a flag * @beacon_int: beacon interval (TODO make interface config) + * @listen_interval: listen interval in units of beacon interval * @flags: configuration flags defined above * @power_level: requested transmit power (in dBm) * @max_antenna_gain: maximum antenna gain (in dBi) @@ -446,6 +447,7 @@ struct ieee80211_conf { int radio_enabled; int beacon_int; + u16 listen_interval; u32 flags; int power_level; int max_antenna_gain; @@ -787,6 +789,9 @@ enum ieee80211_hw_flags { * @max_signal: Maximum value for signal (rssi) in RX information, used * only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB * + * @max_listen_interval: max listen interval in units of beacon interval + * that HW supports + * * @queues: number of available hardware transmit queues for * data packets. WMM/QoS requires at least four, these * queues need to have configurable access parameters. @@ -814,7 +819,9 @@ struct ieee80211_hw { unsigned int extra_tx_headroom; int channel_change_time; int vif_data_size; - u16 queues, ampdu_queues; + u16 queues; + u16 ampdu_queues; + u16 max_listen_interval; s8 max_signal; }; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index a4c5b90de769..0c02c471bca2 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1689,6 +1689,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) if (local->hw.conf.beacon_int < 10) local->hw.conf.beacon_int = 100; + if (local->hw.max_listen_interval == 0) + local->hw.max_listen_interval = 1; + + local->hw.conf.listen_interval = local->hw.max_listen_interval; + local->wstats_flags |= local->hw.flags & (IEEE80211_HW_SIGNAL_UNSPEC | IEEE80211_HW_SIGNAL_DB | IEEE80211_HW_SIGNAL_DBM) ? diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 591e6331c427..779affd8b8fe 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -774,7 +774,8 @@ static void ieee80211_send_assoc(struct net_device *dev, mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT, IEEE80211_STYPE_REASSOC_REQ); mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab); - mgmt->u.reassoc_req.listen_interval = cpu_to_le16(1); + mgmt->u.reassoc_req.listen_interval = + cpu_to_le16(local->hw.conf.listen_interval); memcpy(mgmt->u.reassoc_req.current_ap, ifsta->prev_bssid, ETH_ALEN); } else { @@ -782,7 +783,8 @@ static void ieee80211_send_assoc(struct net_device *dev, mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT, IEEE80211_STYPE_ASSOC_REQ); mgmt->u.assoc_req.capab_info = cpu_to_le16(capab); - mgmt->u.assoc_req.listen_interval = cpu_to_le16(1); + mgmt->u.reassoc_req.listen_interval = + cpu_to_le16(local->hw.conf.listen_interval); } /* SSID */ -- cgit v1.2.3 From d783b061077f92af55244aef1df8780b0f46b5af Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 18 Jul 2008 13:53:02 +0800 Subject: iwlwifi: move iwl4965_mac_ampdu_action to iwl4965-base.c This patch moves iwl4965_mac_ampdu_action to iwl4965-base.c. Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 33 --------------------------- drivers/net/wireless/iwlwifi/iwl-dev.h | 4 ---- drivers/net/wireless/iwlwifi/iwl4965-base.c | 35 ++++++++++++++++++++++++++++- 3 files changed, 34 insertions(+), 38 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index ea23c7629575..3cc6f00d96cd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2067,39 +2067,6 @@ static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id, return 0; } -int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, - enum ieee80211_ampdu_mlme_action action, - const u8 *addr, u16 tid, u16 *ssn) -{ - struct iwl_priv *priv = hw->priv; - DECLARE_MAC_BUF(mac); - - IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n", - print_mac(mac, addr), tid); - - if (!(priv->cfg->sku & IWL_SKU_N)) - return -EACCES; - - switch (action) { - case IEEE80211_AMPDU_RX_START: - IWL_DEBUG_HT("start Rx\n"); - return iwl_rx_agg_start(priv, addr, tid, *ssn); - case IEEE80211_AMPDU_RX_STOP: - IWL_DEBUG_HT("stop Rx\n"); - return iwl_rx_agg_stop(priv, addr, tid); - case IEEE80211_AMPDU_TX_START: - IWL_DEBUG_HT("start Tx\n"); - return iwl_tx_agg_start(priv, addr, tid, ssn); - case IEEE80211_AMPDU_TX_STOP: - IWL_DEBUG_HT("stop Tx\n"); - return iwl_tx_agg_stop(priv, addr, tid); - default: - IWL_DEBUG_HT("unknown\n"); - return -EINVAL; - break; - } - return 0; -} static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len) { diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 010ed69e0e50..d2d4beab82a0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -643,10 +643,6 @@ struct iwl_priv; * Forward declare iwl-4965.c functions for iwl-base.c */ extern void iwl4965_rf_kill_ct_config(struct iwl_priv *priv); - -int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, - enum ieee80211_ampdu_mlme_action action, - const u8 *addr, u16 tid, u16 *ssn); int iwl4965_check_empty_hw_queue(struct iwl_priv *priv, int sta_id, u8 tid, int txq_id); diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 2001b09738ff..a34280f65c1a 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -65,7 +65,7 @@ * NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk */ -#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link 4965AGN driver for Linux" +#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux" #ifdef CONFIG_IWLWIFI_DEBUG #define VD "d" @@ -3345,6 +3345,39 @@ static int iwl4965_mac_conf_tx(struct ieee80211_hw *hw, u16 queue, return 0; } +static int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, + enum ieee80211_ampdu_mlme_action action, + const u8 *addr, u16 tid, u16 *ssn) +{ + struct iwl_priv *priv = hw->priv; + DECLARE_MAC_BUF(mac); + + IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n", + print_mac(mac, addr), tid); + + if (!(priv->cfg->sku & IWL_SKU_N)) + return -EACCES; + + switch (action) { + case IEEE80211_AMPDU_RX_START: + IWL_DEBUG_HT("start Rx\n"); + return iwl_rx_agg_start(priv, addr, tid, *ssn); + case IEEE80211_AMPDU_RX_STOP: + IWL_DEBUG_HT("stop Rx\n"); + return iwl_rx_agg_stop(priv, addr, tid); + case IEEE80211_AMPDU_TX_START: + IWL_DEBUG_HT("start Tx\n"); + return iwl_tx_agg_start(priv, addr, tid, ssn); + case IEEE80211_AMPDU_TX_STOP: + IWL_DEBUG_HT("stop Tx\n"); + return iwl_tx_agg_stop(priv, addr, tid); + default: + IWL_DEBUG_HT("unknown\n"); + return -EINVAL; + break; + } + return 0; +} static int iwl4965_mac_get_tx_stats(struct ieee80211_hw *hw, struct ieee80211_tx_queue_stats *stats) { -- cgit v1.2.3 From 4bf64efd26f5610cde4fb7846e2f37bd1f62d3a9 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 18 Jul 2008 13:53:03 +0800 Subject: iwlwifi: move beacon handling to iwl4965-base.c This patch concentrates becaon handling in iwl4965-base.c. Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 32 ----------------------- drivers/net/wireless/iwlwifi/iwl-commands.h | 2 +- drivers/net/wireless/iwlwifi/iwl-dev.h | 3 +-- drivers/net/wireless/iwlwifi/iwl4965-base.c | 39 ++++++++++++++++++++++++++--- 4 files changed, 37 insertions(+), 39 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 3cc6f00d96cd..9ae8525b9b60 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -1689,38 +1689,6 @@ static int iwl4965_shared_mem_rx_idx(struct iwl_priv *priv) return le32_to_cpu(s->rb_closed) & 0xFFF; } -unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, - struct iwl_frame *frame, u8 rate) -{ - struct iwl4965_tx_beacon_cmd *tx_beacon_cmd; - unsigned int frame_size; - - tx_beacon_cmd = &frame->u.beacon; - memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); - - tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id; - tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - frame_size = iwl4965_fill_beacon_frame(priv, - tx_beacon_cmd->frame, - iwl_bcast_addr, - sizeof(frame->u) - sizeof(*tx_beacon_cmd)); - - BUG_ON(frame_size > MAX_MPDU_SIZE); - tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); - - if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP)) - tx_beacon_cmd->tx.rate_n_flags = - iwl_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK); - else - tx_beacon_cmd->tx.rate_n_flags = - iwl_hw_set_rate_n_flags(rate, 0); - - tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK | - TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK); - return (sizeof(*tx_beacon_cmd) + frame_size); -} - static int iwl4965_alloc_shared_mem(struct iwl_priv *priv) { priv->shared_virt = pci_alloc_consistent(priv->pci_dev, diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 6f3555ffe527..cd6d668f4e00 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -2324,7 +2324,7 @@ struct iwl4965_beacon_notif { /* * REPLY_TX_BEACON = 0x91 (command, has simple generic response) */ -struct iwl4965_tx_beacon_cmd { +struct iwl_tx_beacon_cmd { struct iwl_tx_cmd tx; __le16 tim_idx; u8 tim_size; diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index d2d4beab82a0..ff16cca2b8c7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -219,7 +219,7 @@ enum iwl_pwr_src { struct iwl_frame { union { struct ieee80211_hdr frame; - struct iwl4965_tx_beacon_cmd beacon; + struct iwl_tx_beacon_cmd beacon; u8 raw[IEEE80211_FRAME_LEN]; u8 cmd[360]; } u; @@ -286,7 +286,6 @@ struct iwl_cmd { struct iwl_powertable_cmd powertable; struct iwl_qosparam_cmd qosparam; struct iwl_tx_cmd tx; - struct iwl4965_tx_beacon_cmd tx_beacon; struct iwl4965_rxon_assoc_cmd rxon_assoc; struct iwl_rem_sta_cmd rm_sta; u8 *indirect; diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index a34280f65c1a..94ce026ba602 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -444,11 +444,10 @@ static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame) list_add(&frame->list, &priv->free_frames); } -unsigned int iwl4965_fill_beacon_frame(struct iwl_priv *priv, - struct ieee80211_hdr *hdr, - const u8 *dest, int left) +static unsigned int iwl_fill_beacon_frame(struct iwl_priv *priv, + struct ieee80211_hdr *hdr, + const u8 *dest, int left) { - if (!iwl_is_associated(priv) || !priv->ibss_beacon || ((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) && (priv->iw_mode != IEEE80211_IF_TYPE_AP))) @@ -487,6 +486,38 @@ static u8 iwl4965_rate_get_lowest_plcp(struct iwl_priv *priv) return IWL_RATE_6M_PLCP; } +unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, + struct iwl_frame *frame, u8 rate) +{ + struct iwl_tx_beacon_cmd *tx_beacon_cmd; + unsigned int frame_size; + + tx_beacon_cmd = &frame->u.beacon; + memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); + + tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id; + tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + + frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame, + iwl_bcast_addr, + sizeof(frame->u) - sizeof(*tx_beacon_cmd)); + + BUG_ON(frame_size > MAX_MPDU_SIZE); + tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); + + if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP)) + tx_beacon_cmd->tx.rate_n_flags = + iwl_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK); + else + tx_beacon_cmd->tx.rate_n_flags = + iwl_hw_set_rate_n_flags(rate, 0); + + tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK | + TX_CMD_FLG_TSF_MSK | + TX_CMD_FLG_STA_RATE_MSK; + + return sizeof(*tx_beacon_cmd) + frame_size; +} static int iwl4965_send_beacon_cmd(struct iwl_priv *priv) { struct iwl_frame *frame; -- cgit v1.2.3 From e2e3c57b271d74ed8fd4d378f1517525ef7e5921 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 18 Jul 2008 13:53:04 +0800 Subject: iwlwifi: move iwl4965_set_pwr_src to iwl4965-base.c This patch moves iwl4965_set_pwr_src to iwl4965-base.c. Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 33 ----------------------------- drivers/net/wireless/iwlwifi/iwl4965-base.c | 31 +++++++++++++++++++++++++++ 2 files changed, 31 insertions(+), 33 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 9ae8525b9b60..c0ba28fa6724 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -341,39 +341,6 @@ err: return -EINVAL; } -int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src) -{ - int ret; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - ret = iwl_grab_nic_access(priv); - if (ret) { - spin_unlock_irqrestore(&priv->lock, flags); - return ret; - } - - if (src == IWL_PWR_SRC_VAUX) { - u32 val; - ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE, - &val); - - if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) { - iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VAUX, - ~APMG_PS_CTRL_MSK_PWR_SRC); - } - } else { - iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, - ~APMG_PS_CTRL_MSK_PWR_SRC); - } - - iwl_release_nic_access(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - return ret; -} /* * Activate/Deactivat Tx DMA/FIFO channels according tx fifos mask diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 94ce026ba602..ac02342d2281 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -1262,6 +1262,37 @@ static void iwl4965_rx_card_state_notif(struct iwl_priv *priv, wake_up_interruptible(&priv->wait_command_queue); } +int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + ret = iwl_grab_nic_access(priv); + if (ret) + goto err; + + if (src == IWL_PWR_SRC_VAUX) { + u32 val; + ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE, + &val); + + if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) + iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VAUX, + ~APMG_PS_CTRL_MSK_PWR_SRC); + } else { + iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, + ~APMG_PS_CTRL_MSK_PWR_SRC); + } + + iwl_release_nic_access(priv); +err: + spin_unlock_irqrestore(&priv->lock, flags); + return ret; +} + /** * iwl4965_setup_rx_handlers - Initialize Rx handler callbacks * -- cgit v1.2.3 From e227ceac8429ecd775c213838f0415700727b7b4 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 18 Jul 2008 13:53:05 +0800 Subject: iwlwifi: rename iwl-4695-rs to iwl-agn-rs This patch renames iwl-4965-rs to iwl-agn-rs as it provides rate scale capability for all AGN capable iwlwifi drivers. Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/Makefile | 2 +- drivers/net/wireless/iwlwifi/iwl-4965-rs.c | 2713 --------------------------- drivers/net/wireless/iwlwifi/iwl-4965-rs.h | 318 ---- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 2704 ++++++++++++++++++++++++++ drivers/net/wireless/iwlwifi/iwl-agn-rs.h | 318 ++++ drivers/net/wireless/iwlwifi/iwl-core.c | 2 +- drivers/net/wireless/iwlwifi/iwl-dev.h | 2 +- drivers/net/wireless/iwlwifi/iwl-sta.c | 2 +- drivers/net/wireless/iwlwifi/iwl4965-base.c | 6 +- 9 files changed, 3029 insertions(+), 3038 deletions(-) delete mode 100644 drivers/net/wireless/iwlwifi/iwl-4965-rs.c delete mode 100644 drivers/net/wireless/iwlwifi/iwl-4965-rs.h create mode 100644 drivers/net/wireless/iwlwifi/iwl-agn-rs.c create mode 100644 drivers/net/wireless/iwlwifi/iwl-agn-rs.h diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index 1f52b92f08b5..f50d2f8fd5c9 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -11,7 +11,7 @@ iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl3945-$(CONFIG_IWL3945_LEDS) += iwl-3945-led.o obj-$(CONFIG_IWL4965) += iwl4965.o -iwl4965-objs := iwl4965-base.o iwl-4965.o iwl-4965-rs.o +iwl4965-objs := iwl4965-base.o iwl-4965.o iwl-agn-rs.o ifeq ($(CONFIG_IWL5000),y) iwl4965-objs += iwl-5000.o diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c deleted file mode 100644 index 3ccb84aa5dbc..000000000000 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c +++ /dev/null @@ -1,2713 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * James P. Ketrenos - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include "../net/mac80211/rate.h" - -#include "iwl-dev.h" -#include "iwl-sta.h" -#include "iwl-core.h" -#include "iwl-helpers.h" - -#define RS_NAME "iwl-4965-rs" - -#define NUM_TRY_BEFORE_ANT_TOGGLE 1 -#define IWL_NUMBER_TRY 1 -#define IWL_HT_NUMBER_TRY 3 - -#define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */ -#define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */ -#define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */ - -/* max time to accum history 2 seconds */ -#define IWL_RATE_SCALE_FLUSH_INTVL (2*HZ) - -static u8 rs_ht_to_legacy[] = { - IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, - IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, - IWL_RATE_6M_INDEX, - IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX, - IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX, - IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX, - IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX -}; - -static const u8 ant_toggle_lookup[] = { - /*ANT_NONE -> */ ANT_NONE, - /*ANT_A -> */ ANT_B, - /*ANT_B -> */ ANT_C, - /*ANT_AB -> */ ANT_BC, - /*ANT_C -> */ ANT_A, - /*ANT_AC -> */ ANT_AB, - /*ANT_BC -> */ ANT_AC, - /*ANT_ABC -> */ ANT_ABC, -}; - -/** - * struct iwl4965_rate_scale_data -- tx success history for one rate - */ -struct iwl4965_rate_scale_data { - u64 data; /* bitmap of successful frames */ - s32 success_counter; /* number of frames successful */ - s32 success_ratio; /* per-cent * 128 */ - s32 counter; /* number of frames attempted */ - s32 average_tpt; /* success ratio * expected throughput */ - unsigned long stamp; -}; - -/** - * struct iwl4965_scale_tbl_info -- tx params and success history for all rates - * - * There are two of these in struct iwl4965_lq_sta, - * one for "active", and one for "search". - */ -struct iwl4965_scale_tbl_info { - enum iwl_table_type lq_type; - u8 ant_type; - u8 is_SGI; /* 1 = short guard interval */ - u8 is_fat; /* 1 = 40 MHz channel width */ - u8 is_dup; /* 1 = duplicated data streams */ - u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */ - s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */ - u32 current_rate; /* rate_n_flags, uCode API format */ - struct iwl4965_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */ -}; - -struct iwl4965_traffic_load { - unsigned long time_stamp; /* age of the oldest statistics */ - u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time - * slice */ - u32 total; /* total num of packets during the - * last TID_MAX_TIME_DIFF */ - u8 queue_count; /* number of queues that has - * been used since the last cleanup */ - u8 head; /* start of the circular buffer */ -}; - -/** - * struct iwl4965_lq_sta -- driver's rate scaling private structure - * - * Pointer to this gets passed back and forth between driver and mac80211. - */ -struct iwl4965_lq_sta { - u8 active_tbl; /* index of active table, range 0-1 */ - u8 enable_counter; /* indicates HT mode */ - u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */ - u8 search_better_tbl; /* 1: currently trying alternate mode */ - s32 last_tpt; - - /* The following determine when to search for a new mode */ - u32 table_count_limit; - u32 max_failure_limit; /* # failed frames before new search */ - u32 max_success_limit; /* # successful frames before new search */ - u32 table_count; - u32 total_failed; /* total failed frames, any/all rates */ - u32 total_success; /* total successful frames, any/all rates */ - u32 flush_timer; /* time staying in mode before new search */ - - u8 action_counter; /* # mode-switch actions tried */ - u8 is_green; - u8 is_dup; - enum ieee80211_band band; - u8 ibss_sta_added; - - /* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */ - u32 supp_rates; - u16 active_legacy_rate; - u16 active_siso_rate; - u16 active_mimo2_rate; - u16 active_mimo3_rate; - u16 active_rate_basic; - - struct iwl_link_quality_cmd lq; - struct iwl4965_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */ - struct iwl4965_traffic_load load[TID_MAX_LOAD_COUNT]; - u8 tx_agg_tid_en; -#ifdef CONFIG_MAC80211_DEBUGFS - struct dentry *rs_sta_dbgfs_scale_table_file; - struct dentry *rs_sta_dbgfs_stats_table_file; - struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file; - u32 dbg_fixed_rate; -#endif - struct iwl_priv *drv; -}; - -static void rs_rate_scale_perform(struct iwl_priv *priv, - struct net_device *dev, - struct ieee80211_hdr *hdr, - struct sta_info *sta); -static void rs_fill_link_cmd(const struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - u32 rate_n_flags); - - -#ifdef CONFIG_MAC80211_DEBUGFS -static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, - u32 *rate_n_flags, int index); -#else -static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, - u32 *rate_n_flags, int index) -{} -#endif - -/* - * Expected throughput metrics for following rates: - * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits - * "G" is the only table that supports CCK (the first 4 rates). - */ -/*FIXME:RS:need to spearate tables for MIMO2/MIMO3*/ -static s32 expected_tpt_A[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186 -}; - -static s32 expected_tpt_G[IWL_RATE_COUNT] = { - 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 186 -}; - -static s32 expected_tpt_siso20MHz[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 42, 42, 76, 102, 124, 159, 183, 193, 202 -}; - -static s32 expected_tpt_siso20MHzSGI[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 46, 46, 82, 110, 132, 168, 192, 202, 211 -}; - -static s32 expected_tpt_mimo20MHz[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 74, 74, 123, 155, 179, 214, 236, 244, 251 -}; - -static s32 expected_tpt_mimo20MHzSGI[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 81, 81, 131, 164, 188, 222, 243, 251, 257 -}; - -static s32 expected_tpt_siso40MHz[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 77, 77, 127, 160, 184, 220, 242, 250, 257 -}; - -static s32 expected_tpt_siso40MHzSGI[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 83, 83, 135, 169, 193, 229, 250, 257, 264 -}; - -static s32 expected_tpt_mimo40MHz[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 123, 123, 182, 214, 235, 264, 279, 285, 289 -}; - -static s32 expected_tpt_mimo40MHzSGI[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 131, 131, 191, 222, 242, 270, 284, 289, 293 -}; - -static inline u8 rs_extract_rate(u32 rate_n_flags) -{ - return (u8)(rate_n_flags & 0xFF); -} - -static void rs_rate_scale_clear_window(struct iwl4965_rate_scale_data *window) -{ - window->data = 0; - window->success_counter = 0; - window->success_ratio = IWL_INVALID_VALUE; - window->counter = 0; - window->average_tpt = IWL_INVALID_VALUE; - window->stamp = 0; -} - -static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) -{ - return ((ant_type & valid_antenna) == ant_type); -} - -/* - * removes the old data from the statistics. All data that is older than - * TID_MAX_TIME_DIFF, will be deleted. - */ -static void rs_tl_rm_old_stats(struct iwl4965_traffic_load *tl, u32 curr_time) -{ - /* The oldest age we want to keep */ - u32 oldest_time = curr_time - TID_MAX_TIME_DIFF; - - while (tl->queue_count && - (tl->time_stamp < oldest_time)) { - tl->total -= tl->packet_count[tl->head]; - tl->packet_count[tl->head] = 0; - tl->time_stamp += TID_QUEUE_CELL_SPACING; - tl->queue_count--; - tl->head++; - if (tl->head >= TID_QUEUE_MAX_SIZE) - tl->head = 0; - } -} - -/* - * increment traffic load value for tid and also remove - * any old values if passed the certain time period - */ -static u8 rs_tl_add_packet(struct iwl4965_lq_sta *lq_data, - struct ieee80211_hdr *hdr) -{ - u32 curr_time = jiffies_to_msecs(jiffies); - u32 time_diff; - s32 index; - struct iwl4965_traffic_load *tl = NULL; - __le16 fc = hdr->frame_control; - u8 tid; - - if (ieee80211_is_data_qos(fc)) { - u8 *qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & 0xf; - } else - return MAX_TID_COUNT; - - tl = &lq_data->load[tid]; - - curr_time -= curr_time % TID_ROUND_VALUE; - - /* Happens only for the first packet. Initialize the data */ - if (!(tl->queue_count)) { - tl->total = 1; - tl->time_stamp = curr_time; - tl->queue_count = 1; - tl->head = 0; - tl->packet_count[0] = 1; - return MAX_TID_COUNT; - } - - time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); - index = time_diff / TID_QUEUE_CELL_SPACING; - - /* The history is too long: remove data that is older than */ - /* TID_MAX_TIME_DIFF */ - if (index >= TID_QUEUE_MAX_SIZE) - rs_tl_rm_old_stats(tl, curr_time); - - index = (tl->head + index) % TID_QUEUE_MAX_SIZE; - tl->packet_count[index] = tl->packet_count[index] + 1; - tl->total = tl->total + 1; - - if ((index + 1) > tl->queue_count) - tl->queue_count = index + 1; - - return tid; -} - -/* - get the traffic load value for tid -*/ -static u32 rs_tl_get_load(struct iwl4965_lq_sta *lq_data, u8 tid) -{ - u32 curr_time = jiffies_to_msecs(jiffies); - u32 time_diff; - s32 index; - struct iwl4965_traffic_load *tl = NULL; - - if (tid >= TID_MAX_LOAD_COUNT) - return 0; - - tl = &(lq_data->load[tid]); - - curr_time -= curr_time % TID_ROUND_VALUE; - - if (!(tl->queue_count)) - return 0; - - time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); - index = time_diff / TID_QUEUE_CELL_SPACING; - - /* The history is too long: remove data that is older than */ - /* TID_MAX_TIME_DIFF */ - if (index >= TID_QUEUE_MAX_SIZE) - rs_tl_rm_old_stats(tl, curr_time); - - return tl->total; -} - -static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_data, u8 tid, - struct sta_info *sta) -{ - unsigned long state; - DECLARE_MAC_BUF(mac); - - spin_lock_bh(&sta->lock); - state = sta->ampdu_mlme.tid_state_tx[tid]; - spin_unlock_bh(&sta->lock); - - if (state == HT_AGG_STATE_IDLE && - rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) { - IWL_DEBUG_HT("Starting Tx agg: STA: %s tid: %d\n", - print_mac(mac, sta->addr), tid); - ieee80211_start_tx_ba_session(priv->hw, sta->addr, tid); - } -} - -static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, - struct iwl4965_lq_sta *lq_data, - struct sta_info *sta) -{ - if ((tid < TID_MAX_LOAD_COUNT)) - rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); - else if (tid == IWL_AGG_ALL_TID) - for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++) - rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); -} - -static inline int get_num_of_ant_from_rate(u32 rate_n_flags) -{ - return (!!(rate_n_flags & RATE_MCS_ANT_A_MSK) + - !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + - !!(rate_n_flags & RATE_MCS_ANT_C_MSK)); -} - -/** - * rs_collect_tx_data - Update the success/failure sliding window - * - * We keep a sliding window of the last 62 packets transmitted - * at this rate. window->data contains the bitmask of successful - * packets. - */ -static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows, - int scale_index, s32 tpt, int retries, - int successes) -{ - struct iwl4965_rate_scale_data *window = NULL; - static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1)); - s32 fail_count; - - if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) - return -EINVAL; - - /* Select data for current tx bit rate */ - window = &(windows[scale_index]); - - /* - * Keep track of only the latest 62 tx frame attempts in this rate's - * history window; anything older isn't really relevant any more. - * If we have filled up the sliding window, drop the oldest attempt; - * if the oldest attempt (highest bit in bitmap) shows "success", - * subtract "1" from the success counter (this is the main reason - * we keep these bitmaps!). - */ - while (retries > 0) { - if (window->counter >= IWL_RATE_MAX_WINDOW) { - - /* remove earliest */ - window->counter = IWL_RATE_MAX_WINDOW - 1; - - if (window->data & mask) { - window->data &= ~mask; - window->success_counter--; - } - } - - /* Increment frames-attempted counter */ - window->counter++; - - /* Shift bitmap by one frame (throw away oldest history), - * OR in "1", and increment "success" if this - * frame was successful. */ - window->data <<= 1;; - if (successes > 0) { - window->success_counter++; - window->data |= 0x1; - successes--; - } - - retries--; - } - - /* Calculate current success ratio, avoid divide-by-0! */ - if (window->counter > 0) - window->success_ratio = 128 * (100 * window->success_counter) - / window->counter; - else - window->success_ratio = IWL_INVALID_VALUE; - - fail_count = window->counter - window->success_counter; - - /* Calculate average throughput, if we have enough history. */ - if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) || - (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH)) - window->average_tpt = (window->success_ratio * tpt + 64) / 128; - else - window->average_tpt = IWL_INVALID_VALUE; - - /* Tag this window as having been updated */ - window->stamp = jiffies; - - return 0; -} - -/* - * Fill uCode API rate_n_flags field, based on "search" or "active" table. - */ -/* FIXME:RS:remove this function and put the flags statically in the table */ -static u32 rate_n_flags_from_tbl(struct iwl4965_scale_tbl_info *tbl, - int index, u8 use_green) -{ - u32 rate_n_flags = 0; - - if (is_legacy(tbl->lq_type)) { - rate_n_flags = iwl_rates[index].plcp; - if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE) - rate_n_flags |= RATE_MCS_CCK_MSK; - - } else if (is_Ht(tbl->lq_type)) { - if (index > IWL_LAST_OFDM_RATE) { - IWL_ERROR("invalid HT rate index %d\n", index); - index = IWL_LAST_OFDM_RATE; - } - rate_n_flags = RATE_MCS_HT_MSK; - - if (is_siso(tbl->lq_type)) - rate_n_flags |= iwl_rates[index].plcp_siso; - else if (is_mimo2(tbl->lq_type)) - rate_n_flags |= iwl_rates[index].plcp_mimo2; - else - rate_n_flags |= iwl_rates[index].plcp_mimo3; - } else { - IWL_ERROR("Invalid tbl->lq_type %d\n", tbl->lq_type); - } - - rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) & - RATE_MCS_ANT_ABC_MSK); - - if (is_Ht(tbl->lq_type)) { - if (tbl->is_fat) { - if (tbl->is_dup) - rate_n_flags |= RATE_MCS_DUP_MSK; - else - rate_n_flags |= RATE_MCS_FAT_MSK; - } - if (tbl->is_SGI) - rate_n_flags |= RATE_MCS_SGI_MSK; - - if (use_green) { - rate_n_flags |= RATE_MCS_GF_MSK; - if (is_siso(tbl->lq_type) && tbl->is_SGI) { - rate_n_flags &= ~RATE_MCS_SGI_MSK; - IWL_ERROR("GF was set with SGI:SISO\n"); - } - } - } - return rate_n_flags; -} - -/* - * Interpret uCode API's rate_n_flags format, - * fill "search" or "active" tx mode table. - */ -static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags, - enum ieee80211_band band, - struct iwl4965_scale_tbl_info *tbl, - int *rate_idx) -{ - u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK); - u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags); - u8 mcs; - - *rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags); - - if (*rate_idx == IWL_RATE_INVALID) { - *rate_idx = -1; - return -EINVAL; - } - tbl->is_SGI = 0; /* default legacy setup */ - tbl->is_fat = 0; - tbl->is_dup = 0; - tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS); - tbl->lq_type = LQ_NONE; - - /* legacy rate format */ - if (!(rate_n_flags & RATE_MCS_HT_MSK)) { - if (num_of_ant == 1) { - if (band == IEEE80211_BAND_5GHZ) - tbl->lq_type = LQ_A; - else - tbl->lq_type = LQ_G; - } - /* HT rate format */ - } else { - if (rate_n_flags & RATE_MCS_SGI_MSK) - tbl->is_SGI = 1; - - if ((rate_n_flags & RATE_MCS_FAT_MSK) || - (rate_n_flags & RATE_MCS_DUP_MSK)) - tbl->is_fat = 1; - - if (rate_n_flags & RATE_MCS_DUP_MSK) - tbl->is_dup = 1; - - mcs = rs_extract_rate(rate_n_flags); - - /* SISO */ - if (mcs <= IWL_RATE_SISO_60M_PLCP) { - if (num_of_ant == 1) - tbl->lq_type = LQ_SISO; /*else NONE*/ - /* MIMO2 */ - } else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) { - if (num_of_ant == 2) - tbl->lq_type = LQ_MIMO2; - /* MIMO3 */ - } else { - if (num_of_ant == 3) - tbl->lq_type = LQ_MIMO3; - } - } - return 0; -} - -/* switch to another antenna/antennas and return 1 */ -/* if no other valid antenna found, return 0 */ -static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, - struct iwl4965_scale_tbl_info *tbl) -{ - u8 new_ant_type; - - if (!tbl->ant_type || tbl->ant_type > ANT_ABC) - return 0; - - if (!rs_is_valid_ant(valid_ant, tbl->ant_type)) - return 0; - - new_ant_type = ant_toggle_lookup[tbl->ant_type]; - - while ((new_ant_type != tbl->ant_type) && - !rs_is_valid_ant(valid_ant, new_ant_type)) - new_ant_type = ant_toggle_lookup[new_ant_type]; - - if (new_ant_type == tbl->ant_type) - return 0; - - tbl->ant_type = new_ant_type; - *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK; - *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS; - return 1; -} - -/* FIXME:RS: in 4965 we don't use greenfield at all */ -/* FIXME:RS: don't use greenfield for now in TX */ -#if 0 -static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf) -{ - return ((conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) && - priv->current_ht_config.is_green_field && - !priv->current_ht_config.non_GF_STA_present); -} -#endif -static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf) -{ - return 0; -} - -/** - * rs_get_supported_rates - get the available rates - * - * if management frame or broadcast frame only return - * basic available rates. - * - */ -static u16 rs_get_supported_rates(struct iwl4965_lq_sta *lq_sta, - struct ieee80211_hdr *hdr, - enum iwl_table_type rate_type) -{ - if (hdr && is_multicast_ether_addr(hdr->addr1) && - lq_sta->active_rate_basic) - return lq_sta->active_rate_basic; - - if (is_legacy(rate_type)) { - return lq_sta->active_legacy_rate; - } else { - if (is_siso(rate_type)) - return lq_sta->active_siso_rate; - else if (is_mimo2(rate_type)) - return lq_sta->active_mimo2_rate; - else - return lq_sta->active_mimo3_rate; - } -} - -static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask, - int rate_type) -{ - u8 high = IWL_RATE_INVALID; - u8 low = IWL_RATE_INVALID; - - /* 802.11A or ht walks to the next literal adjacent rate in - * the rate table */ - if (is_a_band(rate_type) || !is_legacy(rate_type)) { - int i; - u32 mask; - - /* Find the previous rate that is in the rate mask */ - i = index - 1; - for (mask = (1 << i); i >= 0; i--, mask >>= 1) { - if (rate_mask & mask) { - low = i; - break; - } - } - - /* Find the next rate that is in the rate mask */ - i = index + 1; - for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) { - if (rate_mask & mask) { - high = i; - break; - } - } - - return (high << 8) | low; - } - - low = index; - while (low != IWL_RATE_INVALID) { - low = iwl_rates[low].prev_rs; - if (low == IWL_RATE_INVALID) - break; - if (rate_mask & (1 << low)) - break; - IWL_DEBUG_RATE("Skipping masked lower rate: %d\n", low); - } - - high = index; - while (high != IWL_RATE_INVALID) { - high = iwl_rates[high].next_rs; - if (high == IWL_RATE_INVALID) - break; - if (rate_mask & (1 << high)) - break; - IWL_DEBUG_RATE("Skipping masked higher rate: %d\n", high); - } - - return (high << 8) | low; -} - -static u32 rs_get_lower_rate(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_scale_tbl_info *tbl, u8 scale_index, - u8 ht_possible) -{ - s32 low; - u16 rate_mask; - u16 high_low; - u8 switch_to_legacy = 0; - u8 is_green = lq_sta->is_green; - - /* check if we need to switch from HT to legacy rates. - * assumption is that mandatory rates (1Mbps or 6Mbps) - * are always supported (spec demand) */ - if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) { - switch_to_legacy = 1; - scale_index = rs_ht_to_legacy[scale_index]; - if (lq_sta->band == IEEE80211_BAND_5GHZ) - tbl->lq_type = LQ_A; - else - tbl->lq_type = LQ_G; - - if (num_of_ant(tbl->ant_type) > 1) - tbl->ant_type = ANT_A;/*FIXME:RS*/ - - tbl->is_fat = 0; - tbl->is_SGI = 0; - } - - rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type); - - /* Mask with station rate restriction */ - if (is_legacy(tbl->lq_type)) { - /* supp_rates has no CCK bits in A mode */ - if (lq_sta->band == IEEE80211_BAND_5GHZ) - rate_mask = (u16)(rate_mask & - (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); - else - rate_mask = (u16)(rate_mask & lq_sta->supp_rates); - } - - /* If we switched from HT to legacy, check current rate */ - if (switch_to_legacy && (rate_mask & (1 << scale_index))) { - low = scale_index; - goto out; - } - - high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask, - tbl->lq_type); - low = high_low & 0xff; - - if (low == IWL_RATE_INVALID) - low = scale_index; - -out: - return rate_n_flags_from_tbl(tbl, low, is_green); -} - -/* - * mac80211 sends us Tx status - */ -static void rs_tx_status(void *priv_rate, struct net_device *dev, - struct sk_buff *skb) -{ - int status; - u8 retries; - int rs_index, index = 0; - struct iwl4965_lq_sta *lq_sta; - struct iwl_link_quality_cmd *table; - struct sta_info *sta; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct iwl_priv *priv = (struct iwl_priv *)priv_rate; - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_hw *hw = local_to_hw(local); - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct iwl4965_rate_scale_data *window = NULL; - struct iwl4965_rate_scale_data *search_win = NULL; - u32 tx_rate; - struct iwl4965_scale_tbl_info tbl_type; - struct iwl4965_scale_tbl_info *curr_tbl, *search_tbl; - u8 active_index = 0; - __le16 fc = hdr->frame_control; - s32 tpt = 0; - - IWL_DEBUG_RATE_LIMIT("get frame ack response, update rate scale window\n"); - - if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) - return; - - /* This packet was aggregated but doesn't carry rate scale info */ - if ((info->flags & IEEE80211_TX_CTL_AMPDU) && - !(info->flags & IEEE80211_TX_STAT_AMPDU)) - return; - - retries = info->status.retry_count; - - if (retries > 15) - retries = 15; - - rcu_read_lock(); - - sta = sta_info_get(local, hdr->addr1); - - if (!sta || !sta->rate_ctrl_priv) - goto out; - - - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; - - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && - !lq_sta->ibss_sta_added) - goto out; - - table = &lq_sta->lq; - active_index = lq_sta->active_tbl; - - curr_tbl = &(lq_sta->lq_info[active_index]); - search_tbl = &(lq_sta->lq_info[(1 - active_index)]); - window = (struct iwl4965_rate_scale_data *) - &(curr_tbl->win[0]); - search_win = (struct iwl4965_rate_scale_data *) - &(search_tbl->win[0]); - - /* - * Ignore this Tx frame response if its initial rate doesn't match - * that of latest Link Quality command. There may be stragglers - * from a previous Link Quality command, but we're no longer interested - * in those; they're either from the "active" mode while we're trying - * to check "search" mode, or a prior "search" mode after we've moved - * to a new "search" mode (which might become the new "active" mode). - */ - tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags); - rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); - if (priv->band == IEEE80211_BAND_5GHZ) - rs_index -= IWL_FIRST_OFDM_RATE; - - if ((info->tx_rate_idx < 0) || - (tbl_type.is_SGI ^ - !!(info->flags & IEEE80211_TX_CTL_SHORT_GI)) || - (tbl_type.is_fat ^ - !!(info->flags & IEEE80211_TX_CTL_40_MHZ_WIDTH)) || - (tbl_type.is_dup ^ - !!(info->flags & IEEE80211_TX_CTL_DUP_DATA)) || - (tbl_type.ant_type ^ info->antenna_sel_tx) || - (!!(tx_rate & RATE_MCS_HT_MSK) ^ - !!(info->flags & IEEE80211_TX_CTL_OFDM_HT)) || - (!!(tx_rate & RATE_MCS_GF_MSK) ^ - !!(info->flags & IEEE80211_TX_CTL_GREEN_FIELD)) || - (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate != - hw->wiphy->bands[info->band]->bitrates[info->tx_rate_idx].bitrate)) { - IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate); - goto out; - } - - /* Update frame history window with "failure" for each Tx retry. */ - while (retries) { - /* Look up the rate and other info used for each tx attempt. - * Each tx attempt steps one entry deeper in the rate table. */ - tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags); - rs_get_tbl_info_from_mcs(tx_rate, priv->band, - &tbl_type, &rs_index); - - /* If type matches "search" table, - * add failure to "search" history */ - if ((tbl_type.lq_type == search_tbl->lq_type) && - (tbl_type.ant_type == search_tbl->ant_type) && - (tbl_type.is_SGI == search_tbl->is_SGI)) { - if (search_tbl->expected_tpt) - tpt = search_tbl->expected_tpt[rs_index]; - else - tpt = 0; - rs_collect_tx_data(search_win, rs_index, tpt, 1, 0); - - /* Else if type matches "current/active" table, - * add failure to "current/active" history */ - } else if ((tbl_type.lq_type == curr_tbl->lq_type) && - (tbl_type.ant_type == curr_tbl->ant_type) && - (tbl_type.is_SGI == curr_tbl->is_SGI)) { - if (curr_tbl->expected_tpt) - tpt = curr_tbl->expected_tpt[rs_index]; - else - tpt = 0; - rs_collect_tx_data(window, rs_index, tpt, 1, 0); - } - - /* If not searching for a new mode, increment failed counter - * ... this helps determine when to start searching again */ - if (lq_sta->stay_in_tbl) - lq_sta->total_failed++; - --retries; - index++; - - } - - /* - * Find (by rate) the history window to update with final Tx attempt; - * if Tx was successful first try, use original rate, - * else look up the rate that was, finally, successful. - */ - tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags); - rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); - - /* Update frame history window with "success" if Tx got ACKed ... */ - status = !!(info->flags & IEEE80211_TX_STAT_ACK); - - /* If type matches "search" table, - * add final tx status to "search" history */ - if ((tbl_type.lq_type == search_tbl->lq_type) && - (tbl_type.ant_type == search_tbl->ant_type) && - (tbl_type.is_SGI == search_tbl->is_SGI)) { - if (search_tbl->expected_tpt) - tpt = search_tbl->expected_tpt[rs_index]; - else - tpt = 0; - if (info->flags & IEEE80211_TX_CTL_AMPDU) - rs_collect_tx_data(search_win, rs_index, tpt, - info->status.ampdu_ack_len, - info->status.ampdu_ack_map); - else - rs_collect_tx_data(search_win, rs_index, tpt, - 1, status); - /* Else if type matches "current/active" table, - * add final tx status to "current/active" history */ - } else if ((tbl_type.lq_type == curr_tbl->lq_type) && - (tbl_type.ant_type == curr_tbl->ant_type) && - (tbl_type.is_SGI == curr_tbl->is_SGI)) { - if (curr_tbl->expected_tpt) - tpt = curr_tbl->expected_tpt[rs_index]; - else - tpt = 0; - if (info->flags & IEEE80211_TX_CTL_AMPDU) - rs_collect_tx_data(window, rs_index, tpt, - info->status.ampdu_ack_len, - info->status.ampdu_ack_map); - else - rs_collect_tx_data(window, rs_index, tpt, - 1, status); - } - - /* If not searching for new mode, increment success/failed counter - * ... these help determine when to start searching again */ - if (lq_sta->stay_in_tbl) { - if (info->flags & IEEE80211_TX_CTL_AMPDU) { - lq_sta->total_success += info->status.ampdu_ack_map; - lq_sta->total_failed += - (info->status.ampdu_ack_len - info->status.ampdu_ack_map); - } else { - if (status) - lq_sta->total_success++; - else - lq_sta->total_failed++; - } - } - - /* See if there's a better rate or modulation mode to try. */ - rs_rate_scale_perform(priv, dev, hdr, sta); -out: - rcu_read_unlock(); - return; -} - -/* - * Begin a period of staying with a selected modulation mode. - * Set "stay_in_tbl" flag to prevent any mode switches. - * Set frame tx success limits according to legacy vs. high-throughput, - * and reset overall (spanning all rates) tx success history statistics. - * These control how long we stay using same modulation mode before - * searching for a new mode. - */ -static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy, - struct iwl4965_lq_sta *lq_sta) -{ - IWL_DEBUG_RATE("we are staying in the same table\n"); - lq_sta->stay_in_tbl = 1; /* only place this gets set */ - if (is_legacy) { - lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT; - lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT; - lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT; - } else { - lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT; - lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT; - lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT; - } - lq_sta->table_count = 0; - lq_sta->total_failed = 0; - lq_sta->total_success = 0; -} - -/* - * Find correct throughput table for given mode of modulation - */ -static void rs_set_expected_tpt_table(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_scale_tbl_info *tbl) -{ - if (is_legacy(tbl->lq_type)) { - if (!is_a_band(tbl->lq_type)) - tbl->expected_tpt = expected_tpt_G; - else - tbl->expected_tpt = expected_tpt_A; - } else if (is_siso(tbl->lq_type)) { - if (tbl->is_fat && !lq_sta->is_dup) - if (tbl->is_SGI) - tbl->expected_tpt = expected_tpt_siso40MHzSGI; - else - tbl->expected_tpt = expected_tpt_siso40MHz; - else if (tbl->is_SGI) - tbl->expected_tpt = expected_tpt_siso20MHzSGI; - else - tbl->expected_tpt = expected_tpt_siso20MHz; - - } else if (is_mimo(tbl->lq_type)) { /* FIXME:need to separate mimo2/3 */ - if (tbl->is_fat && !lq_sta->is_dup) - if (tbl->is_SGI) - tbl->expected_tpt = expected_tpt_mimo40MHzSGI; - else - tbl->expected_tpt = expected_tpt_mimo40MHz; - else if (tbl->is_SGI) - tbl->expected_tpt = expected_tpt_mimo20MHzSGI; - else - tbl->expected_tpt = expected_tpt_mimo20MHz; - } else - tbl->expected_tpt = expected_tpt_G; -} - -/* - * Find starting rate for new "search" high-throughput mode of modulation. - * Goal is to find lowest expected rate (under perfect conditions) that is - * above the current measured throughput of "active" mode, to give new mode - * a fair chance to prove itself without too many challenges. - * - * This gets called when transitioning to more aggressive modulation - * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive - * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need - * to decrease to match "active" throughput. When moving from MIMO to SISO, - * bit rate will typically need to increase, but not if performance was bad. - */ -static s32 rs_get_best_rate(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct iwl4965_scale_tbl_info *tbl, /* "search" */ - u16 rate_mask, s8 index) -{ - /* "active" values */ - struct iwl4965_scale_tbl_info *active_tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - s32 active_sr = active_tbl->win[index].success_ratio; - s32 active_tpt = active_tbl->expected_tpt[index]; - - /* expected "search" throughput */ - s32 *tpt_tbl = tbl->expected_tpt; - - s32 new_rate, high, low, start_hi; - u16 high_low; - s8 rate = index; - - new_rate = high = low = start_hi = IWL_RATE_INVALID; - - for (; ;) { - high_low = rs_get_adjacent_rate(priv, rate, rate_mask, - tbl->lq_type); - - low = high_low & 0xff; - high = (high_low >> 8) & 0xff; - - /* - * Lower the "search" bit rate, to give new "search" mode - * approximately the same throughput as "active" if: - * - * 1) "Active" mode has been working modestly well (but not - * great), and expected "search" throughput (under perfect - * conditions) at candidate rate is above the actual - * measured "active" throughput (but less than expected - * "active" throughput under perfect conditions). - * OR - * 2) "Active" mode has been working perfectly or very well - * and expected "search" throughput (under perfect - * conditions) at candidate rate is above expected - * "active" throughput (under perfect conditions). - */ - if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) && - ((active_sr > IWL_RATE_DECREASE_TH) && - (active_sr <= IWL_RATE_HIGH_TH) && - (tpt_tbl[rate] <= active_tpt))) || - ((active_sr >= IWL_RATE_SCALE_SWITCH) && - (tpt_tbl[rate] > active_tpt))) { - - /* (2nd or later pass) - * If we've already tried to raise the rate, and are - * now trying to lower it, use the higher rate. */ - if (start_hi != IWL_RATE_INVALID) { - new_rate = start_hi; - break; - } - - new_rate = rate; - - /* Loop again with lower rate */ - if (low != IWL_RATE_INVALID) - rate = low; - - /* Lower rate not available, use the original */ - else - break; - - /* Else try to raise the "search" rate to match "active" */ - } else { - /* (2nd or later pass) - * If we've already tried to lower the rate, and are - * now trying to raise it, use the lower rate. */ - if (new_rate != IWL_RATE_INVALID) - break; - - /* Loop again with higher rate */ - else if (high != IWL_RATE_INVALID) { - start_hi = high; - rate = high; - - /* Higher rate not available, use the original */ - } else { - break; - } - } - } - - return new_rate; -} - -/* - * Set up search table for MIMO - */ -static int rs_switch_to_mimo2(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct sta_info *sta, - struct iwl4965_scale_tbl_info *tbl, int index) -{ - u16 rate_mask; - s32 rate; - s8 is_green = lq_sta->is_green; - - if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) || - !sta->ht_info.ht_supported) - return -1; - - if (priv->current_ht_config.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC) - return -1; - - /* Need both Tx chains/antennas to support MIMO */ - if (priv->hw_params.tx_chains_num < 2) - return -1; - - IWL_DEBUG_RATE("LQ: try to switch to MIMO2\n"); - - tbl->lq_type = LQ_MIMO2; - tbl->is_dup = lq_sta->is_dup; - tbl->action = 0; - rate_mask = lq_sta->active_mimo2_rate; - - if (priv->current_ht_config.supported_chan_width - == IWL_CHANNEL_WIDTH_40MHZ) - tbl->is_fat = 1; - else - tbl->is_fat = 0; - - /* FIXME: - don't toggle SGI here - if (tbl->is_fat) { - if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY) - tbl->is_SGI = 1; - else - tbl->is_SGI = 0; - } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY) - tbl->is_SGI = 1; - else - tbl->is_SGI = 0; - */ - - rs_set_expected_tpt_table(lq_sta, tbl); - - rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); - - IWL_DEBUG_RATE("LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask); - - if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { - IWL_DEBUG_RATE("Can't switch with index %d rate mask %x\n", - rate, rate_mask); - return -1; - } - tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green); - - IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n", - tbl->current_rate, is_green); - return 0; -} - -/* - * Set up search table for SISO - */ -static int rs_switch_to_siso(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct sta_info *sta, - struct iwl4965_scale_tbl_info *tbl, int index) -{ - u16 rate_mask; - u8 is_green = lq_sta->is_green; - s32 rate; - - if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) || - !sta->ht_info.ht_supported) - return -1; - - IWL_DEBUG_RATE("LQ: try to switch to SISO\n"); - - tbl->is_dup = lq_sta->is_dup; - tbl->lq_type = LQ_SISO; - tbl->action = 0; - rate_mask = lq_sta->active_siso_rate; - - if (priv->current_ht_config.supported_chan_width - == IWL_CHANNEL_WIDTH_40MHZ) - tbl->is_fat = 1; - else - tbl->is_fat = 0; - - /* FIXME: - don't toggle SGI here - if (tbl->is_fat) { - if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY) - tbl->is_SGI = 1; - else - tbl->is_SGI = 0; - } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY) - tbl->is_SGI = 1; - else - tbl->is_SGI = 0; - */ - - if (is_green) - tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/ - - rs_set_expected_tpt_table(lq_sta, tbl); - rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); - - IWL_DEBUG_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask); - if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { - IWL_DEBUG_RATE("can not switch with index %d rate mask %x\n", - rate, rate_mask); - return -1; - } - tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green); - IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n", - tbl->current_rate, is_green); - return 0; -} - -/* - * Try to switch to new modulation mode from legacy - */ -static int rs_move_legacy_other(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct sta_info *sta, - int index) -{ - struct iwl4965_scale_tbl_info *tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl4965_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl4965_rate_scale_data *window = &(tbl->win[index]); - u32 sz = (sizeof(struct iwl4965_scale_tbl_info) - - (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action = tbl->action; - u8 valid_tx_ant = priv->hw_params.valid_tx_ant; - int ret = 0; - - for (; ;) { - switch (tbl->action) { - case IWL_LEGACY_SWITCH_ANTENNA: - IWL_DEBUG_RATE("LQ: Legacy toggle Antenna\n"); - - lq_sta->action_counter++; - - /* Don't change antenna if success has been great */ - if (window->success_ratio >= IWL_RS_GOOD_RATIO) - break; - - /* Set up search table to try other antenna */ - memcpy(search_tbl, tbl, sz); - - if (rs_toggle_antenna(valid_tx_ant, - &search_tbl->current_rate, search_tbl)) { - lq_sta->search_better_tbl = 1; - goto out; - } - break; - case IWL_LEGACY_SWITCH_SISO: - IWL_DEBUG_RATE("LQ: Legacy switch to SISO\n"); - - /* Set up search table to try SISO */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - ret = rs_switch_to_siso(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->search_better_tbl = 1; - lq_sta->action_counter = 0; - goto out; - } - - break; - case IWL_LEGACY_SWITCH_MIMO2: - IWL_DEBUG_RATE("LQ: Legacy switch to MIMO2\n"); - - /* Set up search table to try MIMO */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - search_tbl->ant_type = ANT_AB;/*FIXME:RS*/ - /*FIXME:RS:need to check ant validity*/ - ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->search_better_tbl = 1; - lq_sta->action_counter = 0; - goto out; - } - break; - } - tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO2) - tbl->action = IWL_LEGACY_SWITCH_ANTENNA; - - if (tbl->action == start_action) - break; - - } - return 0; - - out: - tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO2) - tbl->action = IWL_LEGACY_SWITCH_ANTENNA; - return 0; - -} - -/* - * Try to switch to new modulation mode from SISO - */ -static int rs_move_siso_to_other(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct sta_info *sta, - int index) -{ - u8 is_green = lq_sta->is_green; - struct iwl4965_scale_tbl_info *tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl4965_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl4965_rate_scale_data *window = &(tbl->win[index]); - u32 sz = (sizeof(struct iwl4965_scale_tbl_info) - - (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action = tbl->action; - u8 valid_tx_ant = priv->hw_params.valid_tx_ant; - int ret; - - for (;;) { - lq_sta->action_counter++; - switch (tbl->action) { - case IWL_SISO_SWITCH_ANTENNA: - IWL_DEBUG_RATE("LQ: SISO toggle Antenna\n"); - if (window->success_ratio >= IWL_RS_GOOD_RATIO) - break; - - memcpy(search_tbl, tbl, sz); - if (rs_toggle_antenna(valid_tx_ant, - &search_tbl->current_rate, search_tbl)) { - lq_sta->search_better_tbl = 1; - goto out; - } - break; - case IWL_SISO_SWITCH_MIMO2: - IWL_DEBUG_RATE("LQ: SISO switch to MIMO2\n"); - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - search_tbl->ant_type = ANT_AB; /*FIXME:RS*/ - ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->search_better_tbl = 1; - goto out; - } - break; - case IWL_SISO_SWITCH_GI: - if (!tbl->is_fat && - !(priv->current_ht_config.sgf & - HT_SHORT_GI_20MHZ)) - break; - if (tbl->is_fat && - !(priv->current_ht_config.sgf & - HT_SHORT_GI_40MHZ)) - break; - - IWL_DEBUG_RATE("LQ: SISO toggle SGI/NGI\n"); - - memcpy(search_tbl, tbl, sz); - if (is_green) { - if (!tbl->is_SGI) - break; - else - IWL_ERROR("SGI was set in GF+SISO\n"); - } - search_tbl->is_SGI = !tbl->is_SGI; - rs_set_expected_tpt_table(lq_sta, search_tbl); - if (tbl->is_SGI) { - s32 tpt = lq_sta->last_tpt / 100; - if (tpt >= search_tbl->expected_tpt[index]) - break; - } - search_tbl->current_rate = rate_n_flags_from_tbl( - search_tbl, index, is_green); - lq_sta->search_better_tbl = 1; - goto out; - } - tbl->action++; - if (tbl->action > IWL_SISO_SWITCH_GI) - tbl->action = IWL_SISO_SWITCH_ANTENNA; - - if (tbl->action == start_action) - break; - } - return 0; - - out: - tbl->action++; - if (tbl->action > IWL_SISO_SWITCH_GI) - tbl->action = IWL_SISO_SWITCH_ANTENNA; - return 0; -} - -/* - * Try to switch to new modulation mode from MIMO - */ -static int rs_move_mimo_to_other(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct sta_info *sta, - int index) -{ - s8 is_green = lq_sta->is_green; - struct iwl4965_scale_tbl_info *tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl4965_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - u32 sz = (sizeof(struct iwl4965_scale_tbl_info) - - (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action = tbl->action; - /*u8 valid_tx_ant = priv->hw_params.valid_tx_ant;*/ - int ret; - - for (;;) { - lq_sta->action_counter++; - switch (tbl->action) { - case IWL_MIMO_SWITCH_ANTENNA_A: - case IWL_MIMO_SWITCH_ANTENNA_B: - IWL_DEBUG_RATE("LQ: MIMO2 switch to SISO\n"); - - /* Set up new search table for SISO */ - memcpy(search_tbl, tbl, sz); - - /*FIXME:RS:need to check ant validity + C*/ - if (tbl->action == IWL_MIMO_SWITCH_ANTENNA_A) - search_tbl->ant_type = ANT_A; - else - search_tbl->ant_type = ANT_B; - - ret = rs_switch_to_siso(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->search_better_tbl = 1; - goto out; - } - break; - - case IWL_MIMO_SWITCH_GI: - if (!tbl->is_fat && - !(priv->current_ht_config.sgf & - HT_SHORT_GI_20MHZ)) - break; - if (tbl->is_fat && - !(priv->current_ht_config.sgf & - HT_SHORT_GI_40MHZ)) - break; - - IWL_DEBUG_RATE("LQ: MIMO toggle SGI/NGI\n"); - - /* Set up new search table for MIMO */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = !tbl->is_SGI; - rs_set_expected_tpt_table(lq_sta, search_tbl); - /* - * If active table already uses the fastest possible - * modulation (dual stream with short guard interval), - * and it's working well, there's no need to look - * for a better type of modulation! - */ - if (tbl->is_SGI) { - s32 tpt = lq_sta->last_tpt / 100; - if (tpt >= search_tbl->expected_tpt[index]) - break; - } - search_tbl->current_rate = rate_n_flags_from_tbl( - search_tbl, index, is_green); - lq_sta->search_better_tbl = 1; - goto out; - - } - tbl->action++; - if (tbl->action > IWL_MIMO_SWITCH_GI) - tbl->action = IWL_MIMO_SWITCH_ANTENNA_A; - - if (tbl->action == start_action) - break; - } - - return 0; - out: - tbl->action++; - if (tbl->action > IWL_MIMO_SWITCH_GI) - tbl->action = IWL_MIMO_SWITCH_ANTENNA_A; - return 0; - -} - -/* - * Check whether we should continue using same modulation mode, or - * begin search for a new mode, based on: - * 1) # tx successes or failures while using this mode - * 2) # times calling this function - * 3) elapsed time in this mode (not used, for now) - */ -static void rs_stay_in_table(struct iwl4965_lq_sta *lq_sta) -{ - struct iwl4965_scale_tbl_info *tbl; - int i; - int active_tbl; - int flush_interval_passed = 0; - struct iwl_priv *priv; - - priv = lq_sta->drv; - active_tbl = lq_sta->active_tbl; - - tbl = &(lq_sta->lq_info[active_tbl]); - - /* If we've been disallowing search, see if we should now allow it */ - if (lq_sta->stay_in_tbl) { - - /* Elapsed time using current modulation mode */ - if (lq_sta->flush_timer) - flush_interval_passed = - time_after(jiffies, - (unsigned long)(lq_sta->flush_timer + - IWL_RATE_SCALE_FLUSH_INTVL)); - - /* - * Check if we should allow search for new modulation mode. - * If many frames have failed or succeeded, or we've used - * this same modulation for a long time, allow search, and - * reset history stats that keep track of whether we should - * allow a new search. Also (below) reset all bitmaps and - * stats in active history. - */ - if ((lq_sta->total_failed > lq_sta->max_failure_limit) || - (lq_sta->total_success > lq_sta->max_success_limit) || - ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer) - && (flush_interval_passed))) { - IWL_DEBUG_RATE("LQ: stay is expired %d %d %d\n:", - lq_sta->total_failed, - lq_sta->total_success, - flush_interval_passed); - - /* Allow search for new mode */ - lq_sta->stay_in_tbl = 0; /* only place reset */ - lq_sta->total_failed = 0; - lq_sta->total_success = 0; - lq_sta->flush_timer = 0; - - /* - * Else if we've used this modulation mode enough repetitions - * (regardless of elapsed time or success/failure), reset - * history bitmaps and rate-specific stats for all rates in - * active table. - */ - } else { - lq_sta->table_count++; - if (lq_sta->table_count >= - lq_sta->table_count_limit) { - lq_sta->table_count = 0; - - IWL_DEBUG_RATE("LQ: stay in table clear win\n"); - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window( - &(tbl->win[i])); - } - } - - /* If transitioning to allow "search", reset all history - * bitmaps and stats in active table (this will become the new - * "search" table). */ - if (!lq_sta->stay_in_tbl) { - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(tbl->win[i])); - } - } -} - -/* - * Do rate scaling and search for new modulation mode. - */ -static void rs_rate_scale_perform(struct iwl_priv *priv, - struct net_device *dev, - struct ieee80211_hdr *hdr, - struct sta_info *sta) -{ - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_hw *hw = local_to_hw(local); - struct ieee80211_conf *conf = &hw->conf; - int low = IWL_RATE_INVALID; - int high = IWL_RATE_INVALID; - int index; - int i; - struct iwl4965_rate_scale_data *window = NULL; - int current_tpt = IWL_INVALID_VALUE; - int low_tpt = IWL_INVALID_VALUE; - int high_tpt = IWL_INVALID_VALUE; - u32 fail_count; - s8 scale_action = 0; - __le16 fc; - u16 rate_mask; - u8 update_lq = 0; - struct iwl4965_lq_sta *lq_sta; - struct iwl4965_scale_tbl_info *tbl, *tbl1; - u16 rate_scale_index_msk = 0; - u32 rate; - u8 is_green = 0; - u8 active_tbl = 0; - u8 done_search = 0; - u16 high_low; - s32 sr; - u8 tid = MAX_TID_COUNT; - - IWL_DEBUG_RATE("rate scale calculate new rate for skb\n"); - - fc = hdr->frame_control; - if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) { - /* Send management frames and broadcast/multicast data using - * lowest rate. */ - /* TODO: this could probably be improved.. */ - return; - } - - if (!sta || !sta->rate_ctrl_priv) - return; - - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; - - tid = rs_tl_add_packet(lq_sta, hdr); - - /* - * Select rate-scale / modulation-mode table to work with in - * the rest of this function: "search" if searching for better - * modulation mode, or "active" if doing rate scaling within a mode. - */ - if (!lq_sta->search_better_tbl) - active_tbl = lq_sta->active_tbl; - else - active_tbl = 1 - lq_sta->active_tbl; - - tbl = &(lq_sta->lq_info[active_tbl]); - is_green = lq_sta->is_green; - - /* current tx rate */ - index = sta->last_txrate_idx; - - IWL_DEBUG_RATE("Rate scale index %d for type %d\n", index, - tbl->lq_type); - - /* rates available for this association, and for modulation mode */ - rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type); - - IWL_DEBUG_RATE("mask 0x%04X \n", rate_mask); - - /* mask with station rate restriction */ - if (is_legacy(tbl->lq_type)) { - if (lq_sta->band == IEEE80211_BAND_5GHZ) - /* supp_rates has no CCK bits in A mode */ - rate_scale_index_msk = (u16) (rate_mask & - (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); - else - rate_scale_index_msk = (u16) (rate_mask & - lq_sta->supp_rates); - - } else - rate_scale_index_msk = rate_mask; - - if (!rate_scale_index_msk) - rate_scale_index_msk = rate_mask; - - if (!((1 << index) & rate_scale_index_msk)) { - IWL_ERROR("Current Rate is not valid\n"); - return; - } - - /* Get expected throughput table and history window for current rate */ - if (!tbl->expected_tpt) { - IWL_ERROR("tbl->expected_tpt is NULL\n"); - return; - } - - window = &(tbl->win[index]); - - /* - * If there is not enough history to calculate actual average - * throughput, keep analyzing results of more tx frames, without - * changing rate or mode (bypass most of the rest of this function). - * Set up new rate table in uCode only if old rate is not supported - * in current association (use new rate found above). - */ - fail_count = window->counter - window->success_counter; - if ((fail_count < IWL_RATE_MIN_FAILURE_TH) && - (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) { - IWL_DEBUG_RATE("LQ: still below TH. succ=%d total=%d " - "for index %d\n", - window->success_counter, window->counter, index); - - /* Can't calculate this yet; not enough history */ - window->average_tpt = IWL_INVALID_VALUE; - - /* Should we stay with this modulation mode, - * or search for a new one? */ - rs_stay_in_table(lq_sta); - - goto out; - - /* Else we have enough samples; calculate estimate of - * actual average throughput */ - } else { - /*FIXME:RS remove this else if we don't get this error*/ - if (window->average_tpt != ((window->success_ratio * - tbl->expected_tpt[index] + 64) / 128)) { - IWL_ERROR("expected_tpt should have been calculated" - " by now\n"); - window->average_tpt = ((window->success_ratio * - tbl->expected_tpt[index] + 64) / 128); - } - } - - /* If we are searching for better modulation mode, check success. */ - if (lq_sta->search_better_tbl) { - - /* If good success, continue using the "search" mode; - * no need to send new link quality command, since we're - * continuing to use the setup that we've been trying. */ - if (window->average_tpt > lq_sta->last_tpt) { - - IWL_DEBUG_RATE("LQ: SWITCHING TO CURRENT TABLE " - "suc=%d cur-tpt=%d old-tpt=%d\n", - window->success_ratio, - window->average_tpt, - lq_sta->last_tpt); - - if (!is_legacy(tbl->lq_type)) - lq_sta->enable_counter = 1; - - /* Swap tables; "search" becomes "active" */ - lq_sta->active_tbl = active_tbl; - current_tpt = window->average_tpt; - - /* Else poor success; go back to mode in "active" table */ - } else { - - IWL_DEBUG_RATE("LQ: GOING BACK TO THE OLD TABLE " - "suc=%d cur-tpt=%d old-tpt=%d\n", - window->success_ratio, - window->average_tpt, - lq_sta->last_tpt); - - /* Nullify "search" table */ - tbl->lq_type = LQ_NONE; - - /* Revert to "active" table */ - active_tbl = lq_sta->active_tbl; - tbl = &(lq_sta->lq_info[active_tbl]); - - /* Revert to "active" rate and throughput info */ - index = iwl_hwrate_to_plcp_idx(tbl->current_rate); - current_tpt = lq_sta->last_tpt; - - /* Need to set up a new rate table in uCode */ - update_lq = 1; - } - - /* Either way, we've made a decision; modulation mode - * search is done, allow rate adjustment next time. */ - lq_sta->search_better_tbl = 0; - done_search = 1; /* Don't switch modes below! */ - goto lq_update; - } - - /* (Else) not in search of better modulation mode, try for better - * starting rate, while staying in this mode. */ - high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk, - tbl->lq_type); - low = high_low & 0xff; - high = (high_low >> 8) & 0xff; - - sr = window->success_ratio; - - /* Collect measured throughputs for current and adjacent rates */ - current_tpt = window->average_tpt; - if (low != IWL_RATE_INVALID) - low_tpt = tbl->win[low].average_tpt; - if (high != IWL_RATE_INVALID) - high_tpt = tbl->win[high].average_tpt; - - scale_action = 0; - - /* Too many failures, decrease rate */ - if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) { - IWL_DEBUG_RATE("decrease rate because of low success_ratio\n"); - scale_action = -1; - - /* No throughput measured yet for adjacent rates; try increase. */ - } else if ((low_tpt == IWL_INVALID_VALUE) && - (high_tpt == IWL_INVALID_VALUE)) { - - if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH) - scale_action = 1; - else if (low != IWL_RATE_INVALID) - scale_action = -1; - } - - /* Both adjacent throughputs are measured, but neither one has better - * throughput; we're using the best rate, don't change it! */ - else if ((low_tpt != IWL_INVALID_VALUE) && - (high_tpt != IWL_INVALID_VALUE) && - (low_tpt < current_tpt) && - (high_tpt < current_tpt)) - scale_action = 0; - - /* At least one adjacent rate's throughput is measured, - * and may have better performance. */ - else { - /* Higher adjacent rate's throughput is measured */ - if (high_tpt != IWL_INVALID_VALUE) { - /* Higher rate has better throughput */ - if (high_tpt > current_tpt && - sr >= IWL_RATE_INCREASE_TH) { - scale_action = 1; - } else { - IWL_DEBUG_RATE - ("decrease rate because of high tpt\n"); - scale_action = -1; - } - - /* Lower adjacent rate's throughput is measured */ - } else if (low_tpt != IWL_INVALID_VALUE) { - /* Lower rate has better throughput */ - if (low_tpt > current_tpt) { - IWL_DEBUG_RATE - ("decrease rate because of low tpt\n"); - scale_action = -1; - } else if (sr >= IWL_RATE_INCREASE_TH) { - scale_action = 1; - } - } - } - - /* Sanity check; asked for decrease, but success rate or throughput - * has been good at old rate. Don't change it. */ - if ((scale_action == -1) && (low != IWL_RATE_INVALID) && - ((sr > IWL_RATE_HIGH_TH) || - (current_tpt > (100 * tbl->expected_tpt[low])))) - scale_action = 0; - - switch (scale_action) { - case -1: - /* Decrease starting rate, update uCode's rate table */ - if (low != IWL_RATE_INVALID) { - update_lq = 1; - index = low; - } - break; - case 1: - /* Increase starting rate, update uCode's rate table */ - if (high != IWL_RATE_INVALID) { - update_lq = 1; - index = high; - } - - break; - case 0: - /* No change */ - default: - break; - } - - IWL_DEBUG_RATE("choose rate scale index %d action %d low %d " - "high %d type %d\n", - index, scale_action, low, high, tbl->lq_type); - -lq_update: - /* Replace uCode's rate table for the destination station. */ - if (update_lq) { - rate = rate_n_flags_from_tbl(tbl, index, is_green); - rs_fill_link_cmd(priv, lq_sta, rate); - iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); - } - - /* Should we stay with this modulation mode, or search for a new one? */ - rs_stay_in_table(lq_sta); - - /* - * Search for new modulation mode if we're: - * 1) Not changing rates right now - * 2) Not just finishing up a search - * 3) Allowing a new search - */ - if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) { - /* Save current throughput to compare with "search" throughput*/ - lq_sta->last_tpt = current_tpt; - - /* Select a new "search" modulation mode to try. - * If one is found, set up the new "search" table. */ - if (is_legacy(tbl->lq_type)) - rs_move_legacy_other(priv, lq_sta, conf, sta, index); - else if (is_siso(tbl->lq_type)) - rs_move_siso_to_other(priv, lq_sta, conf, sta, index); - else - rs_move_mimo_to_other(priv, lq_sta, conf, sta, index); - - /* If new "search" mode was selected, set up in uCode table */ - if (lq_sta->search_better_tbl) { - /* Access the "search" table, clear its history. */ - tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(tbl->win[i])); - - /* Use new "search" start rate */ - index = iwl_hwrate_to_plcp_idx(tbl->current_rate); - - IWL_DEBUG_RATE("Switch current mcs: %X index: %d\n", - tbl->current_rate, index); - rs_fill_link_cmd(priv, lq_sta, tbl->current_rate); - iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); - } - - /* If the "active" (non-search) mode was legacy, - * and we've tried switching antennas, - * but we haven't been able to try HT modes (not available), - * stay with best antenna legacy modulation for a while - * before next round of mode comparisons. */ - tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]); - if (is_legacy(tbl1->lq_type) && - (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) && - (lq_sta->action_counter >= 1)) { - lq_sta->action_counter = 0; - IWL_DEBUG_RATE("LQ: STAY in legacy table\n"); - rs_set_stay_in_table(priv, 1, lq_sta); - } - - /* If we're in an HT mode, and all 3 mode switch actions - * have been tried and compared, stay in this best modulation - * mode for a while before next round of mode comparisons. */ - if (lq_sta->enable_counter && - (lq_sta->action_counter >= IWL_ACTION_LIMIT)) { - if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) && - (lq_sta->tx_agg_tid_en & (1 << tid)) && - (tid != MAX_TID_COUNT)) { - IWL_DEBUG_RATE("try to aggregate tid %d\n", tid); - rs_tl_turn_on_agg(priv, tid, lq_sta, sta); - } - lq_sta->action_counter = 0; - rs_set_stay_in_table(priv, 0, lq_sta); - } - - /* - * Else, don't search for a new modulation mode. - * Put new timestamp in stay-in-modulation-mode flush timer if: - * 1) Not changing rates right now - * 2) Not just finishing up a search - * 3) flush timer is empty - */ - } else { - if ((!update_lq) && (!done_search) && (!lq_sta->flush_timer)) - lq_sta->flush_timer = jiffies; - } - -out: - tbl->current_rate = rate_n_flags_from_tbl(tbl, index, is_green); - i = index; - sta->last_txrate_idx = i; - - /* sta->txrate_idx is an index to A mode rates which start - * at IWL_FIRST_OFDM_RATE - */ - if (lq_sta->band == IEEE80211_BAND_5GHZ) - sta->txrate_idx = i - IWL_FIRST_OFDM_RATE; - else - sta->txrate_idx = i; - - return; -} - - -static void rs_initialize_lq(struct iwl_priv *priv, - struct ieee80211_conf *conf, - struct sta_info *sta) -{ - struct iwl4965_lq_sta *lq_sta; - struct iwl4965_scale_tbl_info *tbl; - int rate_idx; - int i; - u32 rate; - u8 use_green = rs_use_green(priv, conf); - u8 active_tbl = 0; - u8 valid_tx_ant; - - if (!sta || !sta->rate_ctrl_priv) - goto out; - - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; - i = sta->last_txrate_idx; - - if ((lq_sta->lq.sta_id == 0xff) && - (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)) - goto out; - - valid_tx_ant = priv->hw_params.valid_tx_ant; - - if (!lq_sta->search_better_tbl) - active_tbl = lq_sta->active_tbl; - else - active_tbl = 1 - lq_sta->active_tbl; - - tbl = &(lq_sta->lq_info[active_tbl]); - - if ((i < 0) || (i >= IWL_RATE_COUNT)) - i = 0; - - /* FIXME:RS: This is also wrong in 4965 */ - rate = iwl_rates[i].plcp; - rate |= RATE_MCS_ANT_B_MSK; - rate &= ~RATE_MCS_ANT_A_MSK; - - if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE) - rate |= RATE_MCS_CCK_MSK; - - tbl->ant_type = ANT_B; - rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx); - if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type)) - rs_toggle_antenna(valid_tx_ant, &rate, tbl); - - rate = rate_n_flags_from_tbl(tbl, rate_idx, use_green); - tbl->current_rate = rate; - rs_set_expected_tpt_table(lq_sta, tbl); - rs_fill_link_cmd(NULL, lq_sta, rate); - iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); - out: - return; -} - -static void rs_get_rate(void *priv_rate, struct net_device *dev, - struct ieee80211_supported_band *sband, - struct sk_buff *skb, - struct rate_selection *sel) -{ - - int i; - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_conf *conf = &local->hw.conf; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct sta_info *sta; - __le16 fc; - struct iwl_priv *priv = (struct iwl_priv *)priv_rate; - struct iwl4965_lq_sta *lq_sta; - - IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n"); - - rcu_read_lock(); - - sta = sta_info_get(local, hdr->addr1); - - /* Send management frames and broadcast/multicast data using lowest - * rate. */ - fc = hdr->frame_control; - if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) || - !sta || !sta->rate_ctrl_priv) { - sel->rate_idx = rate_lowest_index(local, sband, sta); - goto out; - } - - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; - i = sta->last_txrate_idx; - - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && - !lq_sta->ibss_sta_added) { - u8 sta_id = iwl_find_station(priv, hdr->addr1); - DECLARE_MAC_BUF(mac); - - if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_RATE("LQ: ADD station %s\n", - print_mac(mac, hdr->addr1)); - sta_id = iwl_add_station_flags(priv, hdr->addr1, - 0, CMD_ASYNC, NULL); - } - if ((sta_id != IWL_INVALID_STATION)) { - lq_sta->lq.sta_id = sta_id; - lq_sta->lq.rs_table[0].rate_n_flags = 0; - lq_sta->ibss_sta_added = 1; - rs_initialize_lq(priv, conf, sta); - } - } - - if ((i < 0) || (i > IWL_RATE_COUNT)) { - sel->rate_idx = rate_lowest_index(local, sband, sta); - goto out; - } - - if (sband->band == IEEE80211_BAND_5GHZ) - i -= IWL_FIRST_OFDM_RATE; - sel->rate_idx = i; -out: - rcu_read_unlock(); -} - -static void *rs_alloc_sta(void *priv_rate, gfp_t gfp) -{ - struct iwl4965_lq_sta *lq_sta; - struct iwl_priv *priv; - int i, j; - - priv = (struct iwl_priv *)priv_rate; - IWL_DEBUG_RATE("create station rate scale window\n"); - - lq_sta = kzalloc(sizeof(struct iwl4965_lq_sta), gfp); - - if (lq_sta == NULL) - return NULL; - lq_sta->lq.sta_id = 0xff; - - - for (j = 0; j < LQ_SIZE; j++) - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i])); - - return lq_sta; -} - -static void rs_rate_init(void *priv_rate, void *priv_sta, - struct ieee80211_local *local, - struct sta_info *sta) -{ - int i, j; - struct ieee80211_conf *conf = &local->hw.conf; - struct ieee80211_supported_band *sband; - struct iwl_priv *priv = (struct iwl_priv *)priv_rate; - struct iwl4965_lq_sta *lq_sta = priv_sta; - - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; - - lq_sta->flush_timer = 0; - lq_sta->supp_rates = sta->supp_rates[sband->band]; - sta->txrate_idx = 3; - for (j = 0; j < LQ_SIZE; j++) - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i])); - - IWL_DEBUG_RATE("LQ: *** rate scale global init ***\n"); - /* TODO: what is a good starting rate for STA? About middle? Maybe not - * the lowest or the highest rate.. Could consider using RSSI from - * previous packets? Need to have IEEE 802.1X auth succeed immediately - * after assoc.. */ - - lq_sta->ibss_sta_added = 0; - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - u8 sta_id = iwl_find_station(priv, sta->addr); - DECLARE_MAC_BUF(mac); - - /* for IBSS the call are from tasklet */ - IWL_DEBUG_RATE("LQ: ADD station %s\n", - print_mac(mac, sta->addr)); - - if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_RATE("LQ: ADD station %s\n", - print_mac(mac, sta->addr)); - sta_id = iwl_add_station_flags(priv, sta->addr, - 0, CMD_ASYNC, NULL); - } - if ((sta_id != IWL_INVALID_STATION)) { - lq_sta->lq.sta_id = sta_id; - lq_sta->lq.rs_table[0].rate_n_flags = 0; - } - /* FIXME: this is w/a remove it later */ - priv->assoc_station_added = 1; - } - - /* Find highest tx rate supported by hardware and destination station */ - for (i = 0; i < sband->n_bitrates; i++) - if (sta->supp_rates[sband->band] & BIT(i)) - sta->txrate_idx = i; - - sta->last_txrate_idx = sta->txrate_idx; - /* WTF is with this bogus comment? A doesn't have cck rates */ - /* For MODE_IEEE80211A, cck rates are at end of rate table */ - if (local->hw.conf.channel->band == IEEE80211_BAND_5GHZ) - sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; - - lq_sta->is_dup = 0; - lq_sta->is_green = rs_use_green(priv, conf); - lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000); - lq_sta->active_rate_basic = priv->active_rate_basic; - lq_sta->band = priv->band; - /* - * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3), - * supp_rates[] does not; shift to convert format, force 9 MBits off. - */ - lq_sta->active_siso_rate = conf->ht_conf.supp_mcs_set[0] << 1; - lq_sta->active_siso_rate |= conf->ht_conf.supp_mcs_set[0] & 0x1; - lq_sta->active_siso_rate &= ~((u16)0x2); - lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE; - - /* Same here */ - lq_sta->active_mimo2_rate = conf->ht_conf.supp_mcs_set[1] << 1; - lq_sta->active_mimo2_rate |= conf->ht_conf.supp_mcs_set[1] & 0x1; - lq_sta->active_mimo2_rate &= ~((u16)0x2); - lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE; - - lq_sta->active_mimo3_rate = conf->ht_conf.supp_mcs_set[2] << 1; - lq_sta->active_mimo3_rate |= conf->ht_conf.supp_mcs_set[2] & 0x1; - lq_sta->active_mimo3_rate &= ~((u16)0x2); - lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE; - - IWL_DEBUG_RATE("SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n", - lq_sta->active_siso_rate, - lq_sta->active_mimo2_rate, - lq_sta->active_mimo3_rate); - - /* These values will be overriden later */ - lq_sta->lq.general_params.single_stream_ant_msk = ANT_A; - lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB; - - /* as default allow aggregation for all tids */ - lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID; - lq_sta->drv = priv; - - rs_initialize_lq(priv, conf, sta); -} - -static void rs_fill_link_cmd(const struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - u32 new_rate) -{ - struct iwl4965_scale_tbl_info tbl_type; - int index = 0; - int rate_idx; - int repeat_rate = 0; - u8 ant_toggle_cnt = 0; - u8 use_ht_possible = 1; - u8 valid_tx_ant = 0; - struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq; - - /* Override starting rate (index 0) if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); - - /* Interpret new_rate (rate_n_flags) */ - memset(&tbl_type, 0, sizeof(tbl_type)); - rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, - &tbl_type, &rate_idx); - - /* How many times should we repeat the initial rate? */ - if (is_legacy(tbl_type.lq_type)) { - ant_toggle_cnt = 1; - repeat_rate = IWL_NUMBER_TRY; - } else { - repeat_rate = IWL_HT_NUMBER_TRY; - } - - lq_cmd->general_params.mimo_delimiter = - is_mimo(tbl_type.lq_type) ? 1 : 0; - - /* Fill 1st table entry (index 0) */ - lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); - - if (num_of_ant(tbl_type.ant_type) == 1) { - lq_cmd->general_params.single_stream_ant_msk = - tbl_type.ant_type; - } else if (num_of_ant(tbl_type.ant_type) == 2) { - lq_cmd->general_params.dual_stream_ant_msk = - tbl_type.ant_type; - } /* otherwise we don't modify the existing value */ - - index++; - repeat_rate--; - - if (priv) - valid_tx_ant = priv->hw_params.valid_tx_ant; - - /* Fill rest of rate table */ - while (index < LINK_QUAL_MAX_RETRY_NUM) { - /* Repeat initial/next rate. - * For legacy IWL_NUMBER_TRY == 1, this loop will not execute. - * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */ - while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) { - if (is_legacy(tbl_type.lq_type)) { - if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) - ant_toggle_cnt++; - else if (priv && - rs_toggle_antenna(valid_tx_ant, - &new_rate, &tbl_type)) - ant_toggle_cnt = 1; -} - - /* Override next rate if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); - - /* Fill next table entry */ - lq_cmd->rs_table[index].rate_n_flags = - cpu_to_le32(new_rate); - repeat_rate--; - index++; - } - - rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type, - &rate_idx); - - /* Indicate to uCode which entries might be MIMO. - * If initial rate was MIMO, this will finally end up - * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */ - if (is_mimo(tbl_type.lq_type)) - lq_cmd->general_params.mimo_delimiter = index; - - /* Get next rate */ - new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx, - use_ht_possible); - - /* How many times should we repeat the next rate? */ - if (is_legacy(tbl_type.lq_type)) { - if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) - ant_toggle_cnt++; - else if (priv && - rs_toggle_antenna(valid_tx_ant, - &new_rate, &tbl_type)) - ant_toggle_cnt = 1; - - repeat_rate = IWL_NUMBER_TRY; - } else { - repeat_rate = IWL_HT_NUMBER_TRY; - } - - /* Don't allow HT rates after next pass. - * rs_get_lower_rate() will change type to LQ_A or LQ_G. */ - use_ht_possible = 0; - - /* Override next rate if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); - - /* Fill next table entry */ - lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); - - index++; - repeat_rate--; - } - - lq_cmd->agg_params.agg_frame_cnt_limit = 64; - lq_cmd->agg_params.agg_dis_start_th = 3; - lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000); -} - -static void *rs_alloc(struct ieee80211_local *local) -{ - return local->hw.priv; -} -/* rate scale requires free function to be implemented */ -static void rs_free(void *priv_rate) -{ - return; -} - -static void rs_clear(void *priv_rate) -{ - struct iwl_priv *priv = (struct iwl_priv *) priv_rate; - - IWL_DEBUG_RATE("enter\n"); - - /* TODO - add rate scale state reset */ - - IWL_DEBUG_RATE("leave\n"); -} - -static void rs_free_sta(void *priv_rate, void *priv_sta) -{ - struct iwl4965_lq_sta *lq_sta = priv_sta; - struct iwl_priv *priv; - - priv = (struct iwl_priv *)priv_rate; - IWL_DEBUG_RATE("enter\n"); - kfree(lq_sta); - IWL_DEBUG_RATE("leave\n"); -} - - -#ifdef CONFIG_MAC80211_DEBUGFS -static int open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} -static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, - u32 *rate_n_flags, int index) -{ - struct iwl_priv *priv; - - priv = lq_sta->drv; - if (lq_sta->dbg_fixed_rate) { - if (index < 12) { - *rate_n_flags = lq_sta->dbg_fixed_rate; - } else { - if (lq_sta->band == IEEE80211_BAND_5GHZ) - *rate_n_flags = 0x800D; - else - *rate_n_flags = 0x820A; - } - IWL_DEBUG_RATE("Fixed rate ON\n"); - } else { - IWL_DEBUG_RATE("Fixed rate OFF\n"); - } -} - -static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, - const char __user *user_buf, size_t count, loff_t *ppos) -{ - struct iwl4965_lq_sta *lq_sta = file->private_data; - struct iwl_priv *priv; - char buf[64]; - int buf_size; - u32 parsed_rate; - - priv = lq_sta->drv; - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - - if (sscanf(buf, "%x", &parsed_rate) == 1) - lq_sta->dbg_fixed_rate = parsed_rate; - else - lq_sta->dbg_fixed_rate = 0; - - lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ - lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - lq_sta->active_mimo3_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - - IWL_DEBUG_RATE("sta_id %d rate 0x%X\n", - lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate); - - if (lq_sta->dbg_fixed_rate) { - rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate); - iwl_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC); - } - - return count; -} - -static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos) -{ - char buff[1024]; - int desc = 0; - int i = 0; - - struct iwl4965_lq_sta *lq_sta = file->private_data; - - desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id); - desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n", - lq_sta->total_failed, lq_sta->total_success, - lq_sta->active_legacy_rate); - desc += sprintf(buff+desc, "fixed rate 0x%X\n", - lq_sta->dbg_fixed_rate); - desc += sprintf(buff+desc, "general:" - "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n", - lq_sta->lq.general_params.flags, - lq_sta->lq.general_params.mimo_delimiter, - lq_sta->lq.general_params.single_stream_ant_msk, - lq_sta->lq.general_params.dual_stream_ant_msk); - - desc += sprintf(buff+desc, "agg:" - "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n", - le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit), - lq_sta->lq.agg_params.agg_dis_start_th, - lq_sta->lq.agg_params.agg_frame_cnt_limit); - - desc += sprintf(buff+desc, - "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n", - lq_sta->lq.general_params.start_rate_index[0], - lq_sta->lq.general_params.start_rate_index[1], - lq_sta->lq.general_params.start_rate_index[2], - lq_sta->lq.general_params.start_rate_index[3]); - - - for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) - desc += sprintf(buff+desc, " rate[%d] 0x%X\n", - i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags)); - - return simple_read_from_buffer(user_buf, count, ppos, buff, desc); -} - -static const struct file_operations rs_sta_dbgfs_scale_table_ops = { - .write = rs_sta_dbgfs_scale_table_write, - .read = rs_sta_dbgfs_scale_table_read, - .open = open_file_generic, -}; -static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos) -{ - char buff[1024]; - int desc = 0; - int i, j; - - struct iwl4965_lq_sta *lq_sta = file->private_data; - for (i = 0; i < LQ_SIZE; i++) { - desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d\n" - "rate=0x%X\n", - lq_sta->active_tbl == i?"*":"x", - lq_sta->lq_info[i].lq_type, - lq_sta->lq_info[i].is_SGI, - lq_sta->lq_info[i].is_fat, - lq_sta->lq_info[i].is_dup, - lq_sta->lq_info[i].current_rate); - for (j = 0; j < IWL_RATE_COUNT; j++) { - desc += sprintf(buff+desc, - "counter=%d success=%d %%=%d\n", - lq_sta->lq_info[i].win[j].counter, - lq_sta->lq_info[i].win[j].success_counter, - lq_sta->lq_info[i].win[j].success_ratio); - } - } - return simple_read_from_buffer(user_buf, count, ppos, buff, desc); -} - -static const struct file_operations rs_sta_dbgfs_stats_table_ops = { - .read = rs_sta_dbgfs_stats_table_read, - .open = open_file_generic, -}; - -static void rs_add_debugfs(void *priv, void *priv_sta, - struct dentry *dir) -{ - struct iwl4965_lq_sta *lq_sta = priv_sta; - lq_sta->rs_sta_dbgfs_scale_table_file = - debugfs_create_file("rate_scale_table", 0600, dir, - lq_sta, &rs_sta_dbgfs_scale_table_ops); - lq_sta->rs_sta_dbgfs_stats_table_file = - debugfs_create_file("rate_stats_table", 0600, dir, - lq_sta, &rs_sta_dbgfs_stats_table_ops); - lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file = - debugfs_create_u8("tx_agg_tid_enable", 0600, dir, - &lq_sta->tx_agg_tid_en); - -} - -static void rs_remove_debugfs(void *priv, void *priv_sta) -{ - struct iwl4965_lq_sta *lq_sta = priv_sta; - debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file); - debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); - debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file); -} -#endif - -static struct rate_control_ops rs_ops = { - .module = NULL, - .name = RS_NAME, - .tx_status = rs_tx_status, - .get_rate = rs_get_rate, - .rate_init = rs_rate_init, - .clear = rs_clear, - .alloc = rs_alloc, - .free = rs_free, - .alloc_sta = rs_alloc_sta, - .free_sta = rs_free_sta, -#ifdef CONFIG_MAC80211_DEBUGFS - .add_sta_debugfs = rs_add_debugfs, - .remove_sta_debugfs = rs_remove_debugfs, -#endif -}; - -int iwl4965_fill_rs_info(struct ieee80211_hw *hw, char *buf, u8 sta_id) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct iwl_priv *priv = hw->priv; - struct iwl4965_lq_sta *lq_sta; - struct sta_info *sta; - int cnt = 0, i; - u32 samples = 0, success = 0, good = 0; - unsigned long now = jiffies; - u32 max_time = 0; - u8 lq_type, antenna; - - rcu_read_lock(); - - sta = sta_info_get(local, priv->stations[sta_id].sta.sta.addr); - if (!sta || !sta->rate_ctrl_priv) { - if (sta) - IWL_DEBUG_RATE("leave - no private rate data!\n"); - else - IWL_DEBUG_RATE("leave - no station!\n"); - rcu_read_unlock(); - return sprintf(buf, "station %d not found\n", sta_id); - } - - lq_sta = (void *)sta->rate_ctrl_priv; - - lq_type = lq_sta->lq_info[lq_sta->active_tbl].lq_type; - antenna = lq_sta->lq_info[lq_sta->active_tbl].ant_type; - - if (is_legacy(lq_type)) - i = IWL_RATE_54M_INDEX; - else - i = IWL_RATE_60M_INDEX; - while (1) { - u64 mask; - int j; - int active = lq_sta->active_tbl; - - cnt += - sprintf(&buf[cnt], " %2dMbs: ", iwl_rates[i].ieee / 2); - - mask = (1ULL << (IWL_RATE_MAX_WINDOW - 1)); - for (j = 0; j < IWL_RATE_MAX_WINDOW; j++, mask >>= 1) - buf[cnt++] = - (lq_sta->lq_info[active].win[i].data & mask) - ? '1' : '0'; - - samples += lq_sta->lq_info[active].win[i].counter; - good += lq_sta->lq_info[active].win[i].success_counter; - success += lq_sta->lq_info[active].win[i].success_counter * - iwl_rates[i].ieee; - - if (lq_sta->lq_info[active].win[i].stamp) { - int delta = - jiffies_to_msecs(now - - lq_sta->lq_info[active].win[i].stamp); - - if (delta > max_time) - max_time = delta; - - cnt += sprintf(&buf[cnt], "%5dms\n", delta); - } else - buf[cnt++] = '\n'; - - j = iwl4965_get_prev_ieee_rate(i); - if (j == i) - break; - i = j; - } - - /* - * Display the average rate of all samples taken. - * NOTE: We multiply # of samples by 2 since the IEEE measurement - * added from iwl_rates is actually 2X the rate. - */ - if (samples) - cnt += sprintf(&buf[cnt], - "\nAverage rate is %3d.%02dMbs over last %4dms\n" - "%3d%% success (%d good packets over %d tries)\n", - success / (2 * samples), (success * 5 / samples) % 10, - max_time, good * 100 / samples, good, samples); - else - cnt += sprintf(&buf[cnt], "\nAverage rate: 0Mbs\n"); - - cnt += sprintf(&buf[cnt], "\nrate scale type %d antenna %d " - "active_search %d rate index %d\n", lq_type, antenna, - lq_sta->search_better_tbl, sta->last_txrate_idx); - - rcu_read_unlock(); - return cnt; -} - -int iwl4965_rate_control_register(void) -{ - return ieee80211_rate_control_register(&rs_ops); -} - -void iwl4965_rate_control_unregister(void) -{ - ieee80211_rate_control_unregister(&rs_ops); -} - diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.h b/drivers/net/wireless/iwlwifi/iwl-4965-rs.h deleted file mode 100644 index 9b9972885aa5..000000000000 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.h +++ /dev/null @@ -1,318 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * James P. Ketrenos - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#ifndef __iwl_4965_rs_h__ -#define __iwl_4965_rs_h__ - -#include "iwl-dev.h" - -struct iwl_rate_info { - u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */ - u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */ - u8 plcp_mimo2; /* uCode API: IWL_RATE_MIMO2_6M_PLCP, etc. */ - u8 plcp_mimo3; /* uCode API: IWL_RATE_MIMO3_6M_PLCP, etc. */ - u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */ - u8 prev_ieee; /* previous rate in IEEE speeds */ - u8 next_ieee; /* next rate in IEEE speeds */ - u8 prev_rs; /* previous rate used in rs algo */ - u8 next_rs; /* next rate used in rs algo */ - u8 prev_rs_tgg; /* previous rate used in TGG rs algo */ - u8 next_rs_tgg; /* next rate used in TGG rs algo */ -}; - -/* - * These serve as indexes into - * struct iwl_rate_info iwl_rates[IWL_RATE_COUNT]; - */ -enum { - IWL_RATE_1M_INDEX = 0, - IWL_RATE_2M_INDEX, - IWL_RATE_5M_INDEX, - IWL_RATE_11M_INDEX, - IWL_RATE_6M_INDEX, - IWL_RATE_9M_INDEX, - IWL_RATE_12M_INDEX, - IWL_RATE_18M_INDEX, - IWL_RATE_24M_INDEX, - IWL_RATE_36M_INDEX, - IWL_RATE_48M_INDEX, - IWL_RATE_54M_INDEX, - IWL_RATE_60M_INDEX, - IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/ - IWL_RATE_INVM_INDEX = IWL_RATE_COUNT, - IWL_RATE_INVALID = IWL_RATE_COUNT, -}; - -enum { - IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX, - IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX, - IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX, - IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX, -}; - -/* #define vs. enum to keep from defaulting to 'large integer' */ -#define IWL_RATE_6M_MASK (1 << IWL_RATE_6M_INDEX) -#define IWL_RATE_9M_MASK (1 << IWL_RATE_9M_INDEX) -#define IWL_RATE_12M_MASK (1 << IWL_RATE_12M_INDEX) -#define IWL_RATE_18M_MASK (1 << IWL_RATE_18M_INDEX) -#define IWL_RATE_24M_MASK (1 << IWL_RATE_24M_INDEX) -#define IWL_RATE_36M_MASK (1 << IWL_RATE_36M_INDEX) -#define IWL_RATE_48M_MASK (1 << IWL_RATE_48M_INDEX) -#define IWL_RATE_54M_MASK (1 << IWL_RATE_54M_INDEX) -#define IWL_RATE_60M_MASK (1 << IWL_RATE_60M_INDEX) -#define IWL_RATE_1M_MASK (1 << IWL_RATE_1M_INDEX) -#define IWL_RATE_2M_MASK (1 << IWL_RATE_2M_INDEX) -#define IWL_RATE_5M_MASK (1 << IWL_RATE_5M_INDEX) -#define IWL_RATE_11M_MASK (1 << IWL_RATE_11M_INDEX) - -/* 4965 uCode API values for legacy bit rates, both OFDM and CCK */ -enum { - IWL_RATE_6M_PLCP = 13, - IWL_RATE_9M_PLCP = 15, - IWL_RATE_12M_PLCP = 5, - IWL_RATE_18M_PLCP = 7, - IWL_RATE_24M_PLCP = 9, - IWL_RATE_36M_PLCP = 11, - IWL_RATE_48M_PLCP = 1, - IWL_RATE_54M_PLCP = 3, - IWL_RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/ - IWL_RATE_1M_PLCP = 10, - IWL_RATE_2M_PLCP = 20, - IWL_RATE_5M_PLCP = 55, - IWL_RATE_11M_PLCP = 110, - /*FIXME:RS:change to IWL_RATE_LEGACY_??M_PLCP */ - /*FIXME:RS:add IWL_RATE_LEGACY_INVM_PLCP = 0,*/ -}; - -/* 4965 uCode API values for OFDM high-throughput (HT) bit rates */ -enum { - IWL_RATE_SISO_6M_PLCP = 0, - IWL_RATE_SISO_12M_PLCP = 1, - IWL_RATE_SISO_18M_PLCP = 2, - IWL_RATE_SISO_24M_PLCP = 3, - IWL_RATE_SISO_36M_PLCP = 4, - IWL_RATE_SISO_48M_PLCP = 5, - IWL_RATE_SISO_54M_PLCP = 6, - IWL_RATE_SISO_60M_PLCP = 7, - IWL_RATE_MIMO2_6M_PLCP = 0x8, - IWL_RATE_MIMO2_12M_PLCP = 0x9, - IWL_RATE_MIMO2_18M_PLCP = 0xa, - IWL_RATE_MIMO2_24M_PLCP = 0xb, - IWL_RATE_MIMO2_36M_PLCP = 0xc, - IWL_RATE_MIMO2_48M_PLCP = 0xd, - IWL_RATE_MIMO2_54M_PLCP = 0xe, - IWL_RATE_MIMO2_60M_PLCP = 0xf, - IWL_RATE_MIMO3_6M_PLCP = 0x10, - IWL_RATE_MIMO3_12M_PLCP = 0x11, - IWL_RATE_MIMO3_18M_PLCP = 0x12, - IWL_RATE_MIMO3_24M_PLCP = 0x13, - IWL_RATE_MIMO3_36M_PLCP = 0x14, - IWL_RATE_MIMO3_48M_PLCP = 0x15, - IWL_RATE_MIMO3_54M_PLCP = 0x16, - IWL_RATE_MIMO3_60M_PLCP = 0x17, - IWL_RATE_SISO_INVM_PLCP, - IWL_RATE_MIMO2_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, - IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, -}; - -/* MAC header values for bit rates */ -enum { - IWL_RATE_6M_IEEE = 12, - IWL_RATE_9M_IEEE = 18, - IWL_RATE_12M_IEEE = 24, - IWL_RATE_18M_IEEE = 36, - IWL_RATE_24M_IEEE = 48, - IWL_RATE_36M_IEEE = 72, - IWL_RATE_48M_IEEE = 96, - IWL_RATE_54M_IEEE = 108, - IWL_RATE_60M_IEEE = 120, - IWL_RATE_1M_IEEE = 2, - IWL_RATE_2M_IEEE = 4, - IWL_RATE_5M_IEEE = 11, - IWL_RATE_11M_IEEE = 22, -}; - -#define IWL_CCK_BASIC_RATES_MASK \ - (IWL_RATE_1M_MASK | \ - IWL_RATE_2M_MASK) - -#define IWL_CCK_RATES_MASK \ - (IWL_BASIC_RATES_MASK | \ - IWL_RATE_5M_MASK | \ - IWL_RATE_11M_MASK) - -#define IWL_OFDM_BASIC_RATES_MASK \ - (IWL_RATE_6M_MASK | \ - IWL_RATE_12M_MASK | \ - IWL_RATE_24M_MASK) - -#define IWL_OFDM_RATES_MASK \ - (IWL_OFDM_BASIC_RATES_MASK | \ - IWL_RATE_9M_MASK | \ - IWL_RATE_18M_MASK | \ - IWL_RATE_36M_MASK | \ - IWL_RATE_48M_MASK | \ - IWL_RATE_54M_MASK) - -#define IWL_BASIC_RATES_MASK \ - (IWL_OFDM_BASIC_RATES_MASK | \ - IWL_CCK_BASIC_RATES_MASK) - -#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1) - -#define IWL_INVALID_VALUE -1 - -#define IWL_MIN_RSSI_VAL -100 -#define IWL_MAX_RSSI_VAL 0 - -/* These values specify how many Tx frame attempts before - * searching for a new modulation mode */ -#define IWL_LEGACY_FAILURE_LIMIT 160 -#define IWL_LEGACY_SUCCESS_LIMIT 480 -#define IWL_LEGACY_TABLE_COUNT 160 - -#define IWL_NONE_LEGACY_FAILURE_LIMIT 400 -#define IWL_NONE_LEGACY_SUCCESS_LIMIT 4500 -#define IWL_NONE_LEGACY_TABLE_COUNT 1500 - -/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */ -#define IWL_RS_GOOD_RATIO 12800 /* 100% */ -#define IWL_RATE_SCALE_SWITCH 10880 /* 85% */ -#define IWL_RATE_HIGH_TH 10880 /* 85% */ -#define IWL_RATE_INCREASE_TH 8960 /* 70% */ -#define IWL_RATE_DECREASE_TH 1920 /* 15% */ - -/* possible actions when in legacy mode */ -#define IWL_LEGACY_SWITCH_ANTENNA 0 -#define IWL_LEGACY_SWITCH_SISO 1 -#define IWL_LEGACY_SWITCH_MIMO2 2 - -/* possible actions when in siso mode */ -#define IWL_SISO_SWITCH_ANTENNA 0 -#define IWL_SISO_SWITCH_MIMO2 1 -#define IWL_SISO_SWITCH_GI 2 - -/* possible actions when in mimo mode */ -#define IWL_MIMO_SWITCH_ANTENNA_A 0 -#define IWL_MIMO_SWITCH_ANTENNA_B 1 -#define IWL_MIMO_SWITCH_GI 2 - -/*FIXME:RS:separate MIMO2/3 transitions*/ - -/*FIXME:RS:add posible acctions for MIMO3*/ - -#define IWL_ACTION_LIMIT 3 /* # possible actions */ - -#define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */ - -/* load per tid defines for A-MPDU activation */ -#define IWL_AGG_TPT_THREHOLD 0 -#define IWL_AGG_LOAD_THRESHOLD 10 -#define IWL_AGG_ALL_TID 0xff -#define TID_QUEUE_CELL_SPACING 50 /*mS */ -#define TID_QUEUE_MAX_SIZE 20 -#define TID_ROUND_VALUE 5 /* mS */ -#define TID_MAX_LOAD_COUNT 8 - -#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING) -#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y)) - -extern const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT]; - -enum iwl_table_type { - LQ_NONE, - LQ_G, /* legacy types */ - LQ_A, - LQ_SISO, /* high-throughput types */ - LQ_MIMO2, - LQ_MIMO3, - LQ_MAX, -}; - -#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A)) -#define is_siso(tbl) ((tbl) == LQ_SISO) -#define is_mimo2(tbl) ((tbl) == LQ_MIMO2) -#define is_mimo3(tbl) ((tbl) == LQ_MIMO3) -#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl)) -#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl)) -#define is_a_band(tbl) ((tbl) == LQ_A) -#define is_g_and(tbl) ((tbl) == LQ_G) - -#define ANT_NONE 0x0 -#define ANT_A BIT(0) -#define ANT_B BIT(1) -#define ANT_AB (ANT_A | ANT_B) -#define ANT_C BIT(2) -#define ANT_AC (ANT_A | ANT_C) -#define ANT_BC (ANT_B | ANT_C) -#define ANT_ABC (ANT_AB | ANT_C) - -static inline u8 num_of_ant(u8 mask) -{ - return !!((mask) & ANT_A) + - !!((mask) & ANT_B) + - !!((mask) & ANT_C); -} - -static inline u8 iwl4965_get_prev_ieee_rate(u8 rate_index) -{ - u8 rate = iwl_rates[rate_index].prev_ieee; - - if (rate == IWL_RATE_INVALID) - rate = rate_index; - return rate; -} - -/** - * iwl4965_fill_rs_info - Fill an output text buffer with the rate representation - * - * NOTE: This is provided as a quick mechanism for a user to visualize - * the performance of the rate control algorithm and is not meant to be - * parsed software. - */ -extern int iwl4965_fill_rs_info(struct ieee80211_hw *, char *buf, u8 sta_id); - -/** - * iwl4965_rate_control_register - Register the rate control algorithm callbacks - * - * Since the rate control algorithm is hardware specific, there is no need - * or reason to place it as a stand alone module. The driver can call - * iwl4965_rate_control_register in order to register the rate control callbacks - * with the mac80211 subsystem. This should be performed prior to calling - * ieee80211_register_hw - * - */ -extern int iwl4965_rate_control_register(void); - -/** - * iwl4965_rate_control_unregister - Unregister the rate control callbacks - * - * This should be called after calling ieee80211_unregister_hw, but before - * the driver is unloaded. - */ -extern void iwl4965_rate_control_unregister(void); - -#endif diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c new file mode 100644 index 000000000000..eee22c6dec73 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -0,0 +1,2704 @@ +/****************************************************************************** + * + * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * James P. Ketrenos + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include "../net/mac80211/rate.h" + +#include "iwl-dev.h" +#include "iwl-sta.h" +#include "iwl-core.h" +#include "iwl-helpers.h" + +#define RS_NAME "iwl-agn-rs" + +#define NUM_TRY_BEFORE_ANT_TOGGLE 1 +#define IWL_NUMBER_TRY 1 +#define IWL_HT_NUMBER_TRY 3 + +#define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */ +#define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */ +#define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */ + +/* max time to accum history 2 seconds */ +#define IWL_RATE_SCALE_FLUSH_INTVL (2*HZ) + +static u8 rs_ht_to_legacy[] = { + IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, + IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, + IWL_RATE_6M_INDEX, + IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX, + IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX, + IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX, + IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX +}; + +static const u8 ant_toggle_lookup[] = { + /*ANT_NONE -> */ ANT_NONE, + /*ANT_A -> */ ANT_B, + /*ANT_B -> */ ANT_C, + /*ANT_AB -> */ ANT_BC, + /*ANT_C -> */ ANT_A, + /*ANT_AC -> */ ANT_AB, + /*ANT_BC -> */ ANT_AC, + /*ANT_ABC -> */ ANT_ABC, +}; + +/** + * struct iwl_rate_scale_data -- tx success history for one rate + */ +struct iwl_rate_scale_data { + u64 data; /* bitmap of successful frames */ + s32 success_counter; /* number of frames successful */ + s32 success_ratio; /* per-cent * 128 */ + s32 counter; /* number of frames attempted */ + s32 average_tpt; /* success ratio * expected throughput */ + unsigned long stamp; +}; + +/** + * struct iwl_scale_tbl_info -- tx params and success history for all rates + * + * There are two of these in struct iwl_lq_sta, + * one for "active", and one for "search". + */ +struct iwl_scale_tbl_info { + enum iwl_table_type lq_type; + u8 ant_type; + u8 is_SGI; /* 1 = short guard interval */ + u8 is_fat; /* 1 = 40 MHz channel width */ + u8 is_dup; /* 1 = duplicated data streams */ + u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */ + s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */ + u32 current_rate; /* rate_n_flags, uCode API format */ + struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */ +}; + +struct iwl_traffic_load { + unsigned long time_stamp; /* age of the oldest statistics */ + u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time + * slice */ + u32 total; /* total num of packets during the + * last TID_MAX_TIME_DIFF */ + u8 queue_count; /* number of queues that has + * been used since the last cleanup */ + u8 head; /* start of the circular buffer */ +}; + +/** + * struct iwl_lq_sta -- driver's rate scaling private structure + * + * Pointer to this gets passed back and forth between driver and mac80211. + */ +struct iwl_lq_sta { + u8 active_tbl; /* index of active table, range 0-1 */ + u8 enable_counter; /* indicates HT mode */ + u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */ + u8 search_better_tbl; /* 1: currently trying alternate mode */ + s32 last_tpt; + + /* The following determine when to search for a new mode */ + u32 table_count_limit; + u32 max_failure_limit; /* # failed frames before new search */ + u32 max_success_limit; /* # successful frames before new search */ + u32 table_count; + u32 total_failed; /* total failed frames, any/all rates */ + u32 total_success; /* total successful frames, any/all rates */ + u32 flush_timer; /* time staying in mode before new search */ + + u8 action_counter; /* # mode-switch actions tried */ + u8 is_green; + u8 is_dup; + enum ieee80211_band band; + u8 ibss_sta_added; + + /* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */ + u32 supp_rates; + u16 active_legacy_rate; + u16 active_siso_rate; + u16 active_mimo2_rate; + u16 active_mimo3_rate; + u16 active_rate_basic; + + struct iwl_link_quality_cmd lq; + struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */ + struct iwl_traffic_load load[TID_MAX_LOAD_COUNT]; + u8 tx_agg_tid_en; +#ifdef CONFIG_MAC80211_DEBUGFS + struct dentry *rs_sta_dbgfs_scale_table_file; + struct dentry *rs_sta_dbgfs_stats_table_file; + struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file; + u32 dbg_fixed_rate; +#endif + struct iwl_priv *drv; +}; + +static void rs_rate_scale_perform(struct iwl_priv *priv, + struct net_device *dev, + struct ieee80211_hdr *hdr, + struct sta_info *sta); +static void rs_fill_link_cmd(const struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, u32 rate_n_flags); + + +#ifdef CONFIG_MAC80211_DEBUGFS +static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, + u32 *rate_n_flags, int index); +#else +static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, + u32 *rate_n_flags, int index) +{} +#endif + +/* + * Expected throughput metrics for following rates: + * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits + * "G" is the only table that supports CCK (the first 4 rates). + */ +/*FIXME:RS:need to spearate tables for MIMO2/MIMO3*/ +static s32 expected_tpt_A[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186 +}; + +static s32 expected_tpt_G[IWL_RATE_COUNT] = { + 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 186 +}; + +static s32 expected_tpt_siso20MHz[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 42, 42, 76, 102, 124, 159, 183, 193, 202 +}; + +static s32 expected_tpt_siso20MHzSGI[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 46, 46, 82, 110, 132, 168, 192, 202, 211 +}; + +static s32 expected_tpt_mimo20MHz[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 74, 74, 123, 155, 179, 214, 236, 244, 251 +}; + +static s32 expected_tpt_mimo20MHzSGI[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 81, 81, 131, 164, 188, 222, 243, 251, 257 +}; + +static s32 expected_tpt_siso40MHz[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 77, 77, 127, 160, 184, 220, 242, 250, 257 +}; + +static s32 expected_tpt_siso40MHzSGI[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 83, 83, 135, 169, 193, 229, 250, 257, 264 +}; + +static s32 expected_tpt_mimo40MHz[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 123, 123, 182, 214, 235, 264, 279, 285, 289 +}; + +static s32 expected_tpt_mimo40MHzSGI[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 131, 131, 191, 222, 242, 270, 284, 289, 293 +}; + +static inline u8 rs_extract_rate(u32 rate_n_flags) +{ + return (u8)(rate_n_flags & 0xFF); +} + +static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window) +{ + window->data = 0; + window->success_counter = 0; + window->success_ratio = IWL_INVALID_VALUE; + window->counter = 0; + window->average_tpt = IWL_INVALID_VALUE; + window->stamp = 0; +} + +static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) +{ + return ((ant_type & valid_antenna) == ant_type); +} + +/* + * removes the old data from the statistics. All data that is older than + * TID_MAX_TIME_DIFF, will be deleted. + */ +static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time) +{ + /* The oldest age we want to keep */ + u32 oldest_time = curr_time - TID_MAX_TIME_DIFF; + + while (tl->queue_count && + (tl->time_stamp < oldest_time)) { + tl->total -= tl->packet_count[tl->head]; + tl->packet_count[tl->head] = 0; + tl->time_stamp += TID_QUEUE_CELL_SPACING; + tl->queue_count--; + tl->head++; + if (tl->head >= TID_QUEUE_MAX_SIZE) + tl->head = 0; + } +} + +/* + * increment traffic load value for tid and also remove + * any old values if passed the certain time period + */ +static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data, + struct ieee80211_hdr *hdr) +{ + u32 curr_time = jiffies_to_msecs(jiffies); + u32 time_diff; + s32 index; + struct iwl_traffic_load *tl = NULL; + __le16 fc = hdr->frame_control; + u8 tid; + + if (ieee80211_is_data_qos(fc)) { + u8 *qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & 0xf; + } else + return MAX_TID_COUNT; + + tl = &lq_data->load[tid]; + + curr_time -= curr_time % TID_ROUND_VALUE; + + /* Happens only for the first packet. Initialize the data */ + if (!(tl->queue_count)) { + tl->total = 1; + tl->time_stamp = curr_time; + tl->queue_count = 1; + tl->head = 0; + tl->packet_count[0] = 1; + return MAX_TID_COUNT; + } + + time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); + index = time_diff / TID_QUEUE_CELL_SPACING; + + /* The history is too long: remove data that is older than */ + /* TID_MAX_TIME_DIFF */ + if (index >= TID_QUEUE_MAX_SIZE) + rs_tl_rm_old_stats(tl, curr_time); + + index = (tl->head + index) % TID_QUEUE_MAX_SIZE; + tl->packet_count[index] = tl->packet_count[index] + 1; + tl->total = tl->total + 1; + + if ((index + 1) > tl->queue_count) + tl->queue_count = index + 1; + + return tid; +} + +/* + get the traffic load value for tid +*/ +static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid) +{ + u32 curr_time = jiffies_to_msecs(jiffies); + u32 time_diff; + s32 index; + struct iwl_traffic_load *tl = NULL; + + if (tid >= TID_MAX_LOAD_COUNT) + return 0; + + tl = &(lq_data->load[tid]); + + curr_time -= curr_time % TID_ROUND_VALUE; + + if (!(tl->queue_count)) + return 0; + + time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); + index = time_diff / TID_QUEUE_CELL_SPACING; + + /* The history is too long: remove data that is older than */ + /* TID_MAX_TIME_DIFF */ + if (index >= TID_QUEUE_MAX_SIZE) + rs_tl_rm_old_stats(tl, curr_time); + + return tl->total; +} + +static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, + struct iwl_lq_sta *lq_data, u8 tid, + struct sta_info *sta) +{ + unsigned long state; + DECLARE_MAC_BUF(mac); + + spin_lock_bh(&sta->lock); + state = sta->ampdu_mlme.tid_state_tx[tid]; + spin_unlock_bh(&sta->lock); + + if (state == HT_AGG_STATE_IDLE && + rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) { + IWL_DEBUG_HT("Starting Tx agg: STA: %s tid: %d\n", + print_mac(mac, sta->addr), tid); + ieee80211_start_tx_ba_session(priv->hw, sta->addr, tid); + } +} + +static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, + struct iwl_lq_sta *lq_data, + struct sta_info *sta) +{ + if ((tid < TID_MAX_LOAD_COUNT)) + rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); + else if (tid == IWL_AGG_ALL_TID) + for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++) + rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); +} + +static inline int get_num_of_ant_from_rate(u32 rate_n_flags) +{ + return (!!(rate_n_flags & RATE_MCS_ANT_A_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_C_MSK)); +} + +/** + * rs_collect_tx_data - Update the success/failure sliding window + * + * We keep a sliding window of the last 62 packets transmitted + * at this rate. window->data contains the bitmask of successful + * packets. + */ +static int rs_collect_tx_data(struct iwl_rate_scale_data *windows, + int scale_index, s32 tpt, int retries, + int successes) +{ + struct iwl_rate_scale_data *window = NULL; + static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1)); + s32 fail_count; + + if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) + return -EINVAL; + + /* Select data for current tx bit rate */ + window = &(windows[scale_index]); + + /* + * Keep track of only the latest 62 tx frame attempts in this rate's + * history window; anything older isn't really relevant any more. + * If we have filled up the sliding window, drop the oldest attempt; + * if the oldest attempt (highest bit in bitmap) shows "success", + * subtract "1" from the success counter (this is the main reason + * we keep these bitmaps!). + */ + while (retries > 0) { + if (window->counter >= IWL_RATE_MAX_WINDOW) { + + /* remove earliest */ + window->counter = IWL_RATE_MAX_WINDOW - 1; + + if (window->data & mask) { + window->data &= ~mask; + window->success_counter--; + } + } + + /* Increment frames-attempted counter */ + window->counter++; + + /* Shift bitmap by one frame (throw away oldest history), + * OR in "1", and increment "success" if this + * frame was successful. */ + window->data <<= 1;; + if (successes > 0) { + window->success_counter++; + window->data |= 0x1; + successes--; + } + + retries--; + } + + /* Calculate current success ratio, avoid divide-by-0! */ + if (window->counter > 0) + window->success_ratio = 128 * (100 * window->success_counter) + / window->counter; + else + window->success_ratio = IWL_INVALID_VALUE; + + fail_count = window->counter - window->success_counter; + + /* Calculate average throughput, if we have enough history. */ + if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) || + (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH)) + window->average_tpt = (window->success_ratio * tpt + 64) / 128; + else + window->average_tpt = IWL_INVALID_VALUE; + + /* Tag this window as having been updated */ + window->stamp = jiffies; + + return 0; +} + +/* + * Fill uCode API rate_n_flags field, based on "search" or "active" table. + */ +/* FIXME:RS:remove this function and put the flags statically in the table */ +static u32 rate_n_flags_from_tbl(struct iwl_scale_tbl_info *tbl, + int index, u8 use_green) +{ + u32 rate_n_flags = 0; + + if (is_legacy(tbl->lq_type)) { + rate_n_flags = iwl_rates[index].plcp; + if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE) + rate_n_flags |= RATE_MCS_CCK_MSK; + + } else if (is_Ht(tbl->lq_type)) { + if (index > IWL_LAST_OFDM_RATE) { + IWL_ERROR("invalid HT rate index %d\n", index); + index = IWL_LAST_OFDM_RATE; + } + rate_n_flags = RATE_MCS_HT_MSK; + + if (is_siso(tbl->lq_type)) + rate_n_flags |= iwl_rates[index].plcp_siso; + else if (is_mimo2(tbl->lq_type)) + rate_n_flags |= iwl_rates[index].plcp_mimo2; + else + rate_n_flags |= iwl_rates[index].plcp_mimo3; + } else { + IWL_ERROR("Invalid tbl->lq_type %d\n", tbl->lq_type); + } + + rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) & + RATE_MCS_ANT_ABC_MSK); + + if (is_Ht(tbl->lq_type)) { + if (tbl->is_fat) { + if (tbl->is_dup) + rate_n_flags |= RATE_MCS_DUP_MSK; + else + rate_n_flags |= RATE_MCS_FAT_MSK; + } + if (tbl->is_SGI) + rate_n_flags |= RATE_MCS_SGI_MSK; + + if (use_green) { + rate_n_flags |= RATE_MCS_GF_MSK; + if (is_siso(tbl->lq_type) && tbl->is_SGI) { + rate_n_flags &= ~RATE_MCS_SGI_MSK; + IWL_ERROR("GF was set with SGI:SISO\n"); + } + } + } + return rate_n_flags; +} + +/* + * Interpret uCode API's rate_n_flags format, + * fill "search" or "active" tx mode table. + */ +static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags, + enum ieee80211_band band, + struct iwl_scale_tbl_info *tbl, + int *rate_idx) +{ + u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK); + u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags); + u8 mcs; + + *rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags); + + if (*rate_idx == IWL_RATE_INVALID) { + *rate_idx = -1; + return -EINVAL; + } + tbl->is_SGI = 0; /* default legacy setup */ + tbl->is_fat = 0; + tbl->is_dup = 0; + tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS); + tbl->lq_type = LQ_NONE; + + /* legacy rate format */ + if (!(rate_n_flags & RATE_MCS_HT_MSK)) { + if (num_of_ant == 1) { + if (band == IEEE80211_BAND_5GHZ) + tbl->lq_type = LQ_A; + else + tbl->lq_type = LQ_G; + } + /* HT rate format */ + } else { + if (rate_n_flags & RATE_MCS_SGI_MSK) + tbl->is_SGI = 1; + + if ((rate_n_flags & RATE_MCS_FAT_MSK) || + (rate_n_flags & RATE_MCS_DUP_MSK)) + tbl->is_fat = 1; + + if (rate_n_flags & RATE_MCS_DUP_MSK) + tbl->is_dup = 1; + + mcs = rs_extract_rate(rate_n_flags); + + /* SISO */ + if (mcs <= IWL_RATE_SISO_60M_PLCP) { + if (num_of_ant == 1) + tbl->lq_type = LQ_SISO; /*else NONE*/ + /* MIMO2 */ + } else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) { + if (num_of_ant == 2) + tbl->lq_type = LQ_MIMO2; + /* MIMO3 */ + } else { + if (num_of_ant == 3) + tbl->lq_type = LQ_MIMO3; + } + } + return 0; +} + +/* switch to another antenna/antennas and return 1 */ +/* if no other valid antenna found, return 0 */ +static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, + struct iwl_scale_tbl_info *tbl) +{ + u8 new_ant_type; + + if (!tbl->ant_type || tbl->ant_type > ANT_ABC) + return 0; + + if (!rs_is_valid_ant(valid_ant, tbl->ant_type)) + return 0; + + new_ant_type = ant_toggle_lookup[tbl->ant_type]; + + while ((new_ant_type != tbl->ant_type) && + !rs_is_valid_ant(valid_ant, new_ant_type)) + new_ant_type = ant_toggle_lookup[new_ant_type]; + + if (new_ant_type == tbl->ant_type) + return 0; + + tbl->ant_type = new_ant_type; + *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK; + *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS; + return 1; +} + +/* FIXME:RS: in 4965 we don't use greenfield at all */ +/* FIXME:RS: don't use greenfield for now in TX */ +#if 0 +static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf) +{ + return ((conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) && + priv->current_ht_config.is_green_field && + !priv->current_ht_config.non_GF_STA_present); +} +#endif +static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf) +{ + return 0; +} + +/** + * rs_get_supported_rates - get the available rates + * + * if management frame or broadcast frame only return + * basic available rates. + * + */ +static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta, + struct ieee80211_hdr *hdr, + enum iwl_table_type rate_type) +{ + if (hdr && is_multicast_ether_addr(hdr->addr1) && + lq_sta->active_rate_basic) + return lq_sta->active_rate_basic; + + if (is_legacy(rate_type)) { + return lq_sta->active_legacy_rate; + } else { + if (is_siso(rate_type)) + return lq_sta->active_siso_rate; + else if (is_mimo2(rate_type)) + return lq_sta->active_mimo2_rate; + else + return lq_sta->active_mimo3_rate; + } +} + +static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask, + int rate_type) +{ + u8 high = IWL_RATE_INVALID; + u8 low = IWL_RATE_INVALID; + + /* 802.11A or ht walks to the next literal adjacent rate in + * the rate table */ + if (is_a_band(rate_type) || !is_legacy(rate_type)) { + int i; + u32 mask; + + /* Find the previous rate that is in the rate mask */ + i = index - 1; + for (mask = (1 << i); i >= 0; i--, mask >>= 1) { + if (rate_mask & mask) { + low = i; + break; + } + } + + /* Find the next rate that is in the rate mask */ + i = index + 1; + for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) { + if (rate_mask & mask) { + high = i; + break; + } + } + + return (high << 8) | low; + } + + low = index; + while (low != IWL_RATE_INVALID) { + low = iwl_rates[low].prev_rs; + if (low == IWL_RATE_INVALID) + break; + if (rate_mask & (1 << low)) + break; + IWL_DEBUG_RATE("Skipping masked lower rate: %d\n", low); + } + + high = index; + while (high != IWL_RATE_INVALID) { + high = iwl_rates[high].next_rs; + if (high == IWL_RATE_INVALID) + break; + if (rate_mask & (1 << high)) + break; + IWL_DEBUG_RATE("Skipping masked higher rate: %d\n", high); + } + + return (high << 8) | low; +} + +static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl, + u8 scale_index, u8 ht_possible) +{ + s32 low; + u16 rate_mask; + u16 high_low; + u8 switch_to_legacy = 0; + u8 is_green = lq_sta->is_green; + + /* check if we need to switch from HT to legacy rates. + * assumption is that mandatory rates (1Mbps or 6Mbps) + * are always supported (spec demand) */ + if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) { + switch_to_legacy = 1; + scale_index = rs_ht_to_legacy[scale_index]; + if (lq_sta->band == IEEE80211_BAND_5GHZ) + tbl->lq_type = LQ_A; + else + tbl->lq_type = LQ_G; + + if (num_of_ant(tbl->ant_type) > 1) + tbl->ant_type = ANT_A;/*FIXME:RS*/ + + tbl->is_fat = 0; + tbl->is_SGI = 0; + } + + rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type); + + /* Mask with station rate restriction */ + if (is_legacy(tbl->lq_type)) { + /* supp_rates has no CCK bits in A mode */ + if (lq_sta->band == IEEE80211_BAND_5GHZ) + rate_mask = (u16)(rate_mask & + (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); + else + rate_mask = (u16)(rate_mask & lq_sta->supp_rates); + } + + /* If we switched from HT to legacy, check current rate */ + if (switch_to_legacy && (rate_mask & (1 << scale_index))) { + low = scale_index; + goto out; + } + + high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask, + tbl->lq_type); + low = high_low & 0xff; + + if (low == IWL_RATE_INVALID) + low = scale_index; + +out: + return rate_n_flags_from_tbl(tbl, low, is_green); +} + +/* + * mac80211 sends us Tx status + */ +static void rs_tx_status(void *priv_rate, struct net_device *dev, + struct sk_buff *skb) +{ + int status; + u8 retries; + int rs_index, index = 0; + struct iwl_lq_sta *lq_sta; + struct iwl_link_quality_cmd *table; + struct sta_info *sta; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct iwl_priv *priv = (struct iwl_priv *)priv_rate; + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_hw *hw = local_to_hw(local); + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct iwl_rate_scale_data *window = NULL; + struct iwl_rate_scale_data *search_win = NULL; + u32 tx_rate; + struct iwl_scale_tbl_info tbl_type; + struct iwl_scale_tbl_info *curr_tbl, *search_tbl; + u8 active_index = 0; + __le16 fc = hdr->frame_control; + s32 tpt = 0; + + IWL_DEBUG_RATE_LIMIT("get frame ack response, update rate scale window\n"); + + if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) + return; + + /* This packet was aggregated but doesn't carry rate scale info */ + if ((info->flags & IEEE80211_TX_CTL_AMPDU) && + !(info->flags & IEEE80211_TX_STAT_AMPDU)) + return; + + retries = info->status.retry_count; + + if (retries > 15) + retries = 15; + + rcu_read_lock(); + + sta = sta_info_get(local, hdr->addr1); + + if (!sta || !sta->rate_ctrl_priv) + goto out; + + + lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; + + if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && + !lq_sta->ibss_sta_added) + goto out; + + table = &lq_sta->lq; + active_index = lq_sta->active_tbl; + + curr_tbl = &(lq_sta->lq_info[active_index]); + search_tbl = &(lq_sta->lq_info[(1 - active_index)]); + window = (struct iwl_rate_scale_data *)&(curr_tbl->win[0]); + search_win = (struct iwl_rate_scale_data *)&(search_tbl->win[0]); + + /* + * Ignore this Tx frame response if its initial rate doesn't match + * that of latest Link Quality command. There may be stragglers + * from a previous Link Quality command, but we're no longer interested + * in those; they're either from the "active" mode while we're trying + * to check "search" mode, or a prior "search" mode after we've moved + * to a new "search" mode (which might become the new "active" mode). + */ + tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags); + rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); + if (priv->band == IEEE80211_BAND_5GHZ) + rs_index -= IWL_FIRST_OFDM_RATE; + + if ((info->tx_rate_idx < 0) || + (tbl_type.is_SGI ^ + !!(info->flags & IEEE80211_TX_CTL_SHORT_GI)) || + (tbl_type.is_fat ^ + !!(info->flags & IEEE80211_TX_CTL_40_MHZ_WIDTH)) || + (tbl_type.is_dup ^ + !!(info->flags & IEEE80211_TX_CTL_DUP_DATA)) || + (tbl_type.ant_type ^ info->antenna_sel_tx) || + (!!(tx_rate & RATE_MCS_HT_MSK) ^ + !!(info->flags & IEEE80211_TX_CTL_OFDM_HT)) || + (!!(tx_rate & RATE_MCS_GF_MSK) ^ + !!(info->flags & IEEE80211_TX_CTL_GREEN_FIELD)) || + (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate != + hw->wiphy->bands[info->band]->bitrates[info->tx_rate_idx].bitrate)) { + IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate); + goto out; + } + + /* Update frame history window with "failure" for each Tx retry. */ + while (retries) { + /* Look up the rate and other info used for each tx attempt. + * Each tx attempt steps one entry deeper in the rate table. */ + tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags); + rs_get_tbl_info_from_mcs(tx_rate, priv->band, + &tbl_type, &rs_index); + + /* If type matches "search" table, + * add failure to "search" history */ + if ((tbl_type.lq_type == search_tbl->lq_type) && + (tbl_type.ant_type == search_tbl->ant_type) && + (tbl_type.is_SGI == search_tbl->is_SGI)) { + if (search_tbl->expected_tpt) + tpt = search_tbl->expected_tpt[rs_index]; + else + tpt = 0; + rs_collect_tx_data(search_win, rs_index, tpt, 1, 0); + + /* Else if type matches "current/active" table, + * add failure to "current/active" history */ + } else if ((tbl_type.lq_type == curr_tbl->lq_type) && + (tbl_type.ant_type == curr_tbl->ant_type) && + (tbl_type.is_SGI == curr_tbl->is_SGI)) { + if (curr_tbl->expected_tpt) + tpt = curr_tbl->expected_tpt[rs_index]; + else + tpt = 0; + rs_collect_tx_data(window, rs_index, tpt, 1, 0); + } + + /* If not searching for a new mode, increment failed counter + * ... this helps determine when to start searching again */ + if (lq_sta->stay_in_tbl) + lq_sta->total_failed++; + --retries; + index++; + + } + + /* + * Find (by rate) the history window to update with final Tx attempt; + * if Tx was successful first try, use original rate, + * else look up the rate that was, finally, successful. + */ + tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags); + rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); + + /* Update frame history window with "success" if Tx got ACKed ... */ + status = !!(info->flags & IEEE80211_TX_STAT_ACK); + + /* If type matches "search" table, + * add final tx status to "search" history */ + if ((tbl_type.lq_type == search_tbl->lq_type) && + (tbl_type.ant_type == search_tbl->ant_type) && + (tbl_type.is_SGI == search_tbl->is_SGI)) { + if (search_tbl->expected_tpt) + tpt = search_tbl->expected_tpt[rs_index]; + else + tpt = 0; + if (info->flags & IEEE80211_TX_CTL_AMPDU) + rs_collect_tx_data(search_win, rs_index, tpt, + info->status.ampdu_ack_len, + info->status.ampdu_ack_map); + else + rs_collect_tx_data(search_win, rs_index, tpt, + 1, status); + /* Else if type matches "current/active" table, + * add final tx status to "current/active" history */ + } else if ((tbl_type.lq_type == curr_tbl->lq_type) && + (tbl_type.ant_type == curr_tbl->ant_type) && + (tbl_type.is_SGI == curr_tbl->is_SGI)) { + if (curr_tbl->expected_tpt) + tpt = curr_tbl->expected_tpt[rs_index]; + else + tpt = 0; + if (info->flags & IEEE80211_TX_CTL_AMPDU) + rs_collect_tx_data(window, rs_index, tpt, + info->status.ampdu_ack_len, + info->status.ampdu_ack_map); + else + rs_collect_tx_data(window, rs_index, tpt, + 1, status); + } + + /* If not searching for new mode, increment success/failed counter + * ... these help determine when to start searching again */ + if (lq_sta->stay_in_tbl) { + if (info->flags & IEEE80211_TX_CTL_AMPDU) { + lq_sta->total_success += info->status.ampdu_ack_map; + lq_sta->total_failed += + (info->status.ampdu_ack_len - info->status.ampdu_ack_map); + } else { + if (status) + lq_sta->total_success++; + else + lq_sta->total_failed++; + } + } + + /* See if there's a better rate or modulation mode to try. */ + rs_rate_scale_perform(priv, dev, hdr, sta); +out: + rcu_read_unlock(); + return; +} + +/* + * Begin a period of staying with a selected modulation mode. + * Set "stay_in_tbl" flag to prevent any mode switches. + * Set frame tx success limits according to legacy vs. high-throughput, + * and reset overall (spanning all rates) tx success history statistics. + * These control how long we stay using same modulation mode before + * searching for a new mode. + */ +static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy, + struct iwl_lq_sta *lq_sta) +{ + IWL_DEBUG_RATE("we are staying in the same table\n"); + lq_sta->stay_in_tbl = 1; /* only place this gets set */ + if (is_legacy) { + lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT; + lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT; + lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT; + } else { + lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT; + lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT; + lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT; + } + lq_sta->table_count = 0; + lq_sta->total_failed = 0; + lq_sta->total_success = 0; +} + +/* + * Find correct throughput table for given mode of modulation + */ +static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl) +{ + if (is_legacy(tbl->lq_type)) { + if (!is_a_band(tbl->lq_type)) + tbl->expected_tpt = expected_tpt_G; + else + tbl->expected_tpt = expected_tpt_A; + } else if (is_siso(tbl->lq_type)) { + if (tbl->is_fat && !lq_sta->is_dup) + if (tbl->is_SGI) + tbl->expected_tpt = expected_tpt_siso40MHzSGI; + else + tbl->expected_tpt = expected_tpt_siso40MHz; + else if (tbl->is_SGI) + tbl->expected_tpt = expected_tpt_siso20MHzSGI; + else + tbl->expected_tpt = expected_tpt_siso20MHz; + + } else if (is_mimo(tbl->lq_type)) { /* FIXME:need to separate mimo2/3 */ + if (tbl->is_fat && !lq_sta->is_dup) + if (tbl->is_SGI) + tbl->expected_tpt = expected_tpt_mimo40MHzSGI; + else + tbl->expected_tpt = expected_tpt_mimo40MHz; + else if (tbl->is_SGI) + tbl->expected_tpt = expected_tpt_mimo20MHzSGI; + else + tbl->expected_tpt = expected_tpt_mimo20MHz; + } else + tbl->expected_tpt = expected_tpt_G; +} + +/* + * Find starting rate for new "search" high-throughput mode of modulation. + * Goal is to find lowest expected rate (under perfect conditions) that is + * above the current measured throughput of "active" mode, to give new mode + * a fair chance to prove itself without too many challenges. + * + * This gets called when transitioning to more aggressive modulation + * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive + * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need + * to decrease to match "active" throughput. When moving from MIMO to SISO, + * bit rate will typically need to increase, but not if performance was bad. + */ +static s32 rs_get_best_rate(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl, /* "search" */ + u16 rate_mask, s8 index) +{ + /* "active" values */ + struct iwl_scale_tbl_info *active_tbl = + &(lq_sta->lq_info[lq_sta->active_tbl]); + s32 active_sr = active_tbl->win[index].success_ratio; + s32 active_tpt = active_tbl->expected_tpt[index]; + + /* expected "search" throughput */ + s32 *tpt_tbl = tbl->expected_tpt; + + s32 new_rate, high, low, start_hi; + u16 high_low; + s8 rate = index; + + new_rate = high = low = start_hi = IWL_RATE_INVALID; + + for (; ;) { + high_low = rs_get_adjacent_rate(priv, rate, rate_mask, + tbl->lq_type); + + low = high_low & 0xff; + high = (high_low >> 8) & 0xff; + + /* + * Lower the "search" bit rate, to give new "search" mode + * approximately the same throughput as "active" if: + * + * 1) "Active" mode has been working modestly well (but not + * great), and expected "search" throughput (under perfect + * conditions) at candidate rate is above the actual + * measured "active" throughput (but less than expected + * "active" throughput under perfect conditions). + * OR + * 2) "Active" mode has been working perfectly or very well + * and expected "search" throughput (under perfect + * conditions) at candidate rate is above expected + * "active" throughput (under perfect conditions). + */ + if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) && + ((active_sr > IWL_RATE_DECREASE_TH) && + (active_sr <= IWL_RATE_HIGH_TH) && + (tpt_tbl[rate] <= active_tpt))) || + ((active_sr >= IWL_RATE_SCALE_SWITCH) && + (tpt_tbl[rate] > active_tpt))) { + + /* (2nd or later pass) + * If we've already tried to raise the rate, and are + * now trying to lower it, use the higher rate. */ + if (start_hi != IWL_RATE_INVALID) { + new_rate = start_hi; + break; + } + + new_rate = rate; + + /* Loop again with lower rate */ + if (low != IWL_RATE_INVALID) + rate = low; + + /* Lower rate not available, use the original */ + else + break; + + /* Else try to raise the "search" rate to match "active" */ + } else { + /* (2nd or later pass) + * If we've already tried to lower the rate, and are + * now trying to raise it, use the lower rate. */ + if (new_rate != IWL_RATE_INVALID) + break; + + /* Loop again with higher rate */ + else if (high != IWL_RATE_INVALID) { + start_hi = high; + rate = high; + + /* Higher rate not available, use the original */ + } else { + break; + } + } + } + + return new_rate; +} + +/* + * Set up search table for MIMO + */ +static int rs_switch_to_mimo2(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct sta_info *sta, + struct iwl_scale_tbl_info *tbl, int index) +{ + u16 rate_mask; + s32 rate; + s8 is_green = lq_sta->is_green; + + if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) || + !sta->ht_info.ht_supported) + return -1; + + if (priv->current_ht_config.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC) + return -1; + + /* Need both Tx chains/antennas to support MIMO */ + if (priv->hw_params.tx_chains_num < 2) + return -1; + + IWL_DEBUG_RATE("LQ: try to switch to MIMO2\n"); + + tbl->lq_type = LQ_MIMO2; + tbl->is_dup = lq_sta->is_dup; + tbl->action = 0; + rate_mask = lq_sta->active_mimo2_rate; + + if (priv->current_ht_config.supported_chan_width + == IWL_CHANNEL_WIDTH_40MHZ) + tbl->is_fat = 1; + else + tbl->is_fat = 0; + + /* FIXME: - don't toggle SGI here + if (tbl->is_fat) { + if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY) + tbl->is_SGI = 1; + else + tbl->is_SGI = 0; + } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY) + tbl->is_SGI = 1; + else + tbl->is_SGI = 0; + */ + + rs_set_expected_tpt_table(lq_sta, tbl); + + rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); + + IWL_DEBUG_RATE("LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask); + + if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { + IWL_DEBUG_RATE("Can't switch with index %d rate mask %x\n", + rate, rate_mask); + return -1; + } + tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green); + + IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n", + tbl->current_rate, is_green); + return 0; +} + +/* + * Set up search table for SISO + */ +static int rs_switch_to_siso(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct sta_info *sta, + struct iwl_scale_tbl_info *tbl, int index) +{ + u16 rate_mask; + u8 is_green = lq_sta->is_green; + s32 rate; + + if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) || + !sta->ht_info.ht_supported) + return -1; + + IWL_DEBUG_RATE("LQ: try to switch to SISO\n"); + + tbl->is_dup = lq_sta->is_dup; + tbl->lq_type = LQ_SISO; + tbl->action = 0; + rate_mask = lq_sta->active_siso_rate; + + if (priv->current_ht_config.supported_chan_width + == IWL_CHANNEL_WIDTH_40MHZ) + tbl->is_fat = 1; + else + tbl->is_fat = 0; + + /* FIXME: - don't toggle SGI here + if (tbl->is_fat) { + if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY) + tbl->is_SGI = 1; + else + tbl->is_SGI = 0; + } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY) + tbl->is_SGI = 1; + else + tbl->is_SGI = 0; + */ + + if (is_green) + tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/ + + rs_set_expected_tpt_table(lq_sta, tbl); + rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); + + IWL_DEBUG_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask); + if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { + IWL_DEBUG_RATE("can not switch with index %d rate mask %x\n", + rate, rate_mask); + return -1; + } + tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green); + IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n", + tbl->current_rate, is_green); + return 0; +} + +/* + * Try to switch to new modulation mode from legacy + */ +static int rs_move_legacy_other(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct sta_info *sta, + int index) +{ + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct iwl_rate_scale_data *window = &(tbl->win[index]); + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); + u8 start_action = tbl->action; + u8 valid_tx_ant = priv->hw_params.valid_tx_ant; + int ret = 0; + + for (; ;) { + switch (tbl->action) { + case IWL_LEGACY_SWITCH_ANTENNA: + IWL_DEBUG_RATE("LQ: Legacy toggle Antenna\n"); + + lq_sta->action_counter++; + + /* Don't change antenna if success has been great */ + if (window->success_ratio >= IWL_RS_GOOD_RATIO) + break; + + /* Set up search table to try other antenna */ + memcpy(search_tbl, tbl, sz); + + if (rs_toggle_antenna(valid_tx_ant, + &search_tbl->current_rate, search_tbl)) { + lq_sta->search_better_tbl = 1; + goto out; + } + break; + case IWL_LEGACY_SWITCH_SISO: + IWL_DEBUG_RATE("LQ: Legacy switch to SISO\n"); + + /* Set up search table to try SISO */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + ret = rs_switch_to_siso(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) { + lq_sta->search_better_tbl = 1; + lq_sta->action_counter = 0; + goto out; + } + + break; + case IWL_LEGACY_SWITCH_MIMO2: + IWL_DEBUG_RATE("LQ: Legacy switch to MIMO2\n"); + + /* Set up search table to try MIMO */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + search_tbl->ant_type = ANT_AB;/*FIXME:RS*/ + /*FIXME:RS:need to check ant validity*/ + ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) { + lq_sta->search_better_tbl = 1; + lq_sta->action_counter = 0; + goto out; + } + break; + } + tbl->action++; + if (tbl->action > IWL_LEGACY_SWITCH_MIMO2) + tbl->action = IWL_LEGACY_SWITCH_ANTENNA; + + if (tbl->action == start_action) + break; + + } + return 0; + + out: + tbl->action++; + if (tbl->action > IWL_LEGACY_SWITCH_MIMO2) + tbl->action = IWL_LEGACY_SWITCH_ANTENNA; + return 0; + +} + +/* + * Try to switch to new modulation mode from SISO + */ +static int rs_move_siso_to_other(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct sta_info *sta, int index) +{ + u8 is_green = lq_sta->is_green; + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct iwl_rate_scale_data *window = &(tbl->win[index]); + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); + u8 start_action = tbl->action; + u8 valid_tx_ant = priv->hw_params.valid_tx_ant; + int ret; + + for (;;) { + lq_sta->action_counter++; + switch (tbl->action) { + case IWL_SISO_SWITCH_ANTENNA: + IWL_DEBUG_RATE("LQ: SISO toggle Antenna\n"); + if (window->success_ratio >= IWL_RS_GOOD_RATIO) + break; + + memcpy(search_tbl, tbl, sz); + if (rs_toggle_antenna(valid_tx_ant, + &search_tbl->current_rate, search_tbl)) { + lq_sta->search_better_tbl = 1; + goto out; + } + break; + case IWL_SISO_SWITCH_MIMO2: + IWL_DEBUG_RATE("LQ: SISO switch to MIMO2\n"); + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + search_tbl->ant_type = ANT_AB; /*FIXME:RS*/ + ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) { + lq_sta->search_better_tbl = 1; + goto out; + } + break; + case IWL_SISO_SWITCH_GI: + if (!tbl->is_fat && + !(priv->current_ht_config.sgf & + HT_SHORT_GI_20MHZ)) + break; + if (tbl->is_fat && + !(priv->current_ht_config.sgf & + HT_SHORT_GI_40MHZ)) + break; + + IWL_DEBUG_RATE("LQ: SISO toggle SGI/NGI\n"); + + memcpy(search_tbl, tbl, sz); + if (is_green) { + if (!tbl->is_SGI) + break; + else + IWL_ERROR("SGI was set in GF+SISO\n"); + } + search_tbl->is_SGI = !tbl->is_SGI; + rs_set_expected_tpt_table(lq_sta, search_tbl); + if (tbl->is_SGI) { + s32 tpt = lq_sta->last_tpt / 100; + if (tpt >= search_tbl->expected_tpt[index]) + break; + } + search_tbl->current_rate = rate_n_flags_from_tbl( + search_tbl, index, is_green); + lq_sta->search_better_tbl = 1; + goto out; + } + tbl->action++; + if (tbl->action > IWL_SISO_SWITCH_GI) + tbl->action = IWL_SISO_SWITCH_ANTENNA; + + if (tbl->action == start_action) + break; + } + return 0; + + out: + tbl->action++; + if (tbl->action > IWL_SISO_SWITCH_GI) + tbl->action = IWL_SISO_SWITCH_ANTENNA; + return 0; +} + +/* + * Try to switch to new modulation mode from MIMO + */ +static int rs_move_mimo_to_other(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct sta_info *sta, int index) +{ + s8 is_green = lq_sta->is_green; + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); + u8 start_action = tbl->action; + /*u8 valid_tx_ant = priv->hw_params.valid_tx_ant;*/ + int ret; + + for (;;) { + lq_sta->action_counter++; + switch (tbl->action) { + case IWL_MIMO_SWITCH_ANTENNA_A: + case IWL_MIMO_SWITCH_ANTENNA_B: + IWL_DEBUG_RATE("LQ: MIMO2 switch to SISO\n"); + + /* Set up new search table for SISO */ + memcpy(search_tbl, tbl, sz); + + /*FIXME:RS:need to check ant validity + C*/ + if (tbl->action == IWL_MIMO_SWITCH_ANTENNA_A) + search_tbl->ant_type = ANT_A; + else + search_tbl->ant_type = ANT_B; + + ret = rs_switch_to_siso(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) { + lq_sta->search_better_tbl = 1; + goto out; + } + break; + + case IWL_MIMO_SWITCH_GI: + if (!tbl->is_fat && + !(priv->current_ht_config.sgf & + HT_SHORT_GI_20MHZ)) + break; + if (tbl->is_fat && + !(priv->current_ht_config.sgf & + HT_SHORT_GI_40MHZ)) + break; + + IWL_DEBUG_RATE("LQ: MIMO toggle SGI/NGI\n"); + + /* Set up new search table for MIMO */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = !tbl->is_SGI; + rs_set_expected_tpt_table(lq_sta, search_tbl); + /* + * If active table already uses the fastest possible + * modulation (dual stream with short guard interval), + * and it's working well, there's no need to look + * for a better type of modulation! + */ + if (tbl->is_SGI) { + s32 tpt = lq_sta->last_tpt / 100; + if (tpt >= search_tbl->expected_tpt[index]) + break; + } + search_tbl->current_rate = rate_n_flags_from_tbl( + search_tbl, index, is_green); + lq_sta->search_better_tbl = 1; + goto out; + + } + tbl->action++; + if (tbl->action > IWL_MIMO_SWITCH_GI) + tbl->action = IWL_MIMO_SWITCH_ANTENNA_A; + + if (tbl->action == start_action) + break; + } + + return 0; + out: + tbl->action++; + if (tbl->action > IWL_MIMO_SWITCH_GI) + tbl->action = IWL_MIMO_SWITCH_ANTENNA_A; + return 0; + +} + +/* + * Check whether we should continue using same modulation mode, or + * begin search for a new mode, based on: + * 1) # tx successes or failures while using this mode + * 2) # times calling this function + * 3) elapsed time in this mode (not used, for now) + */ +static void rs_stay_in_table(struct iwl_lq_sta *lq_sta) +{ + struct iwl_scale_tbl_info *tbl; + int i; + int active_tbl; + int flush_interval_passed = 0; + struct iwl_priv *priv; + + priv = lq_sta->drv; + active_tbl = lq_sta->active_tbl; + + tbl = &(lq_sta->lq_info[active_tbl]); + + /* If we've been disallowing search, see if we should now allow it */ + if (lq_sta->stay_in_tbl) { + + /* Elapsed time using current modulation mode */ + if (lq_sta->flush_timer) + flush_interval_passed = + time_after(jiffies, + (unsigned long)(lq_sta->flush_timer + + IWL_RATE_SCALE_FLUSH_INTVL)); + + /* + * Check if we should allow search for new modulation mode. + * If many frames have failed or succeeded, or we've used + * this same modulation for a long time, allow search, and + * reset history stats that keep track of whether we should + * allow a new search. Also (below) reset all bitmaps and + * stats in active history. + */ + if ((lq_sta->total_failed > lq_sta->max_failure_limit) || + (lq_sta->total_success > lq_sta->max_success_limit) || + ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer) + && (flush_interval_passed))) { + IWL_DEBUG_RATE("LQ: stay is expired %d %d %d\n:", + lq_sta->total_failed, + lq_sta->total_success, + flush_interval_passed); + + /* Allow search for new mode */ + lq_sta->stay_in_tbl = 0; /* only place reset */ + lq_sta->total_failed = 0; + lq_sta->total_success = 0; + lq_sta->flush_timer = 0; + + /* + * Else if we've used this modulation mode enough repetitions + * (regardless of elapsed time or success/failure), reset + * history bitmaps and rate-specific stats for all rates in + * active table. + */ + } else { + lq_sta->table_count++; + if (lq_sta->table_count >= + lq_sta->table_count_limit) { + lq_sta->table_count = 0; + + IWL_DEBUG_RATE("LQ: stay in table clear win\n"); + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window( + &(tbl->win[i])); + } + } + + /* If transitioning to allow "search", reset all history + * bitmaps and stats in active table (this will become the new + * "search" table). */ + if (!lq_sta->stay_in_tbl) { + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&(tbl->win[i])); + } + } +} + +/* + * Do rate scaling and search for new modulation mode. + */ +static void rs_rate_scale_perform(struct iwl_priv *priv, + struct net_device *dev, + struct ieee80211_hdr *hdr, + struct sta_info *sta) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_hw *hw = local_to_hw(local); + struct ieee80211_conf *conf = &hw->conf; + int low = IWL_RATE_INVALID; + int high = IWL_RATE_INVALID; + int index; + int i; + struct iwl_rate_scale_data *window = NULL; + int current_tpt = IWL_INVALID_VALUE; + int low_tpt = IWL_INVALID_VALUE; + int high_tpt = IWL_INVALID_VALUE; + u32 fail_count; + s8 scale_action = 0; + __le16 fc; + u16 rate_mask; + u8 update_lq = 0; + struct iwl_lq_sta *lq_sta; + struct iwl_scale_tbl_info *tbl, *tbl1; + u16 rate_scale_index_msk = 0; + u32 rate; + u8 is_green = 0; + u8 active_tbl = 0; + u8 done_search = 0; + u16 high_low; + s32 sr; + u8 tid = MAX_TID_COUNT; + + IWL_DEBUG_RATE("rate scale calculate new rate for skb\n"); + + fc = hdr->frame_control; + if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) { + /* Send management frames and broadcast/multicast data using + * lowest rate. */ + /* TODO: this could probably be improved.. */ + return; + } + + if (!sta || !sta->rate_ctrl_priv) + return; + + lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; + + tid = rs_tl_add_packet(lq_sta, hdr); + + /* + * Select rate-scale / modulation-mode table to work with in + * the rest of this function: "search" if searching for better + * modulation mode, or "active" if doing rate scaling within a mode. + */ + if (!lq_sta->search_better_tbl) + active_tbl = lq_sta->active_tbl; + else + active_tbl = 1 - lq_sta->active_tbl; + + tbl = &(lq_sta->lq_info[active_tbl]); + is_green = lq_sta->is_green; + + /* current tx rate */ + index = sta->last_txrate_idx; + + IWL_DEBUG_RATE("Rate scale index %d for type %d\n", index, + tbl->lq_type); + + /* rates available for this association, and for modulation mode */ + rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type); + + IWL_DEBUG_RATE("mask 0x%04X \n", rate_mask); + + /* mask with station rate restriction */ + if (is_legacy(tbl->lq_type)) { + if (lq_sta->band == IEEE80211_BAND_5GHZ) + /* supp_rates has no CCK bits in A mode */ + rate_scale_index_msk = (u16) (rate_mask & + (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); + else + rate_scale_index_msk = (u16) (rate_mask & + lq_sta->supp_rates); + + } else + rate_scale_index_msk = rate_mask; + + if (!rate_scale_index_msk) + rate_scale_index_msk = rate_mask; + + if (!((1 << index) & rate_scale_index_msk)) { + IWL_ERROR("Current Rate is not valid\n"); + return; + } + + /* Get expected throughput table and history window for current rate */ + if (!tbl->expected_tpt) { + IWL_ERROR("tbl->expected_tpt is NULL\n"); + return; + } + + window = &(tbl->win[index]); + + /* + * If there is not enough history to calculate actual average + * throughput, keep analyzing results of more tx frames, without + * changing rate or mode (bypass most of the rest of this function). + * Set up new rate table in uCode only if old rate is not supported + * in current association (use new rate found above). + */ + fail_count = window->counter - window->success_counter; + if ((fail_count < IWL_RATE_MIN_FAILURE_TH) && + (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) { + IWL_DEBUG_RATE("LQ: still below TH. succ=%d total=%d " + "for index %d\n", + window->success_counter, window->counter, index); + + /* Can't calculate this yet; not enough history */ + window->average_tpt = IWL_INVALID_VALUE; + + /* Should we stay with this modulation mode, + * or search for a new one? */ + rs_stay_in_table(lq_sta); + + goto out; + + /* Else we have enough samples; calculate estimate of + * actual average throughput */ + } else { + /*FIXME:RS remove this else if we don't get this error*/ + if (window->average_tpt != ((window->success_ratio * + tbl->expected_tpt[index] + 64) / 128)) { + IWL_ERROR("expected_tpt should have been calculated" + " by now\n"); + window->average_tpt = ((window->success_ratio * + tbl->expected_tpt[index] + 64) / 128); + } + } + + /* If we are searching for better modulation mode, check success. */ + if (lq_sta->search_better_tbl) { + + /* If good success, continue using the "search" mode; + * no need to send new link quality command, since we're + * continuing to use the setup that we've been trying. */ + if (window->average_tpt > lq_sta->last_tpt) { + + IWL_DEBUG_RATE("LQ: SWITCHING TO CURRENT TABLE " + "suc=%d cur-tpt=%d old-tpt=%d\n", + window->success_ratio, + window->average_tpt, + lq_sta->last_tpt); + + if (!is_legacy(tbl->lq_type)) + lq_sta->enable_counter = 1; + + /* Swap tables; "search" becomes "active" */ + lq_sta->active_tbl = active_tbl; + current_tpt = window->average_tpt; + + /* Else poor success; go back to mode in "active" table */ + } else { + + IWL_DEBUG_RATE("LQ: GOING BACK TO THE OLD TABLE " + "suc=%d cur-tpt=%d old-tpt=%d\n", + window->success_ratio, + window->average_tpt, + lq_sta->last_tpt); + + /* Nullify "search" table */ + tbl->lq_type = LQ_NONE; + + /* Revert to "active" table */ + active_tbl = lq_sta->active_tbl; + tbl = &(lq_sta->lq_info[active_tbl]); + + /* Revert to "active" rate and throughput info */ + index = iwl_hwrate_to_plcp_idx(tbl->current_rate); + current_tpt = lq_sta->last_tpt; + + /* Need to set up a new rate table in uCode */ + update_lq = 1; + } + + /* Either way, we've made a decision; modulation mode + * search is done, allow rate adjustment next time. */ + lq_sta->search_better_tbl = 0; + done_search = 1; /* Don't switch modes below! */ + goto lq_update; + } + + /* (Else) not in search of better modulation mode, try for better + * starting rate, while staying in this mode. */ + high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk, + tbl->lq_type); + low = high_low & 0xff; + high = (high_low >> 8) & 0xff; + + sr = window->success_ratio; + + /* Collect measured throughputs for current and adjacent rates */ + current_tpt = window->average_tpt; + if (low != IWL_RATE_INVALID) + low_tpt = tbl->win[low].average_tpt; + if (high != IWL_RATE_INVALID) + high_tpt = tbl->win[high].average_tpt; + + scale_action = 0; + + /* Too many failures, decrease rate */ + if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) { + IWL_DEBUG_RATE("decrease rate because of low success_ratio\n"); + scale_action = -1; + + /* No throughput measured yet for adjacent rates; try increase. */ + } else if ((low_tpt == IWL_INVALID_VALUE) && + (high_tpt == IWL_INVALID_VALUE)) { + + if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH) + scale_action = 1; + else if (low != IWL_RATE_INVALID) + scale_action = -1; + } + + /* Both adjacent throughputs are measured, but neither one has better + * throughput; we're using the best rate, don't change it! */ + else if ((low_tpt != IWL_INVALID_VALUE) && + (high_tpt != IWL_INVALID_VALUE) && + (low_tpt < current_tpt) && + (high_tpt < current_tpt)) + scale_action = 0; + + /* At least one adjacent rate's throughput is measured, + * and may have better performance. */ + else { + /* Higher adjacent rate's throughput is measured */ + if (high_tpt != IWL_INVALID_VALUE) { + /* Higher rate has better throughput */ + if (high_tpt > current_tpt && + sr >= IWL_RATE_INCREASE_TH) { + scale_action = 1; + } else { + IWL_DEBUG_RATE + ("decrease rate because of high tpt\n"); + scale_action = -1; + } + + /* Lower adjacent rate's throughput is measured */ + } else if (low_tpt != IWL_INVALID_VALUE) { + /* Lower rate has better throughput */ + if (low_tpt > current_tpt) { + IWL_DEBUG_RATE + ("decrease rate because of low tpt\n"); + scale_action = -1; + } else if (sr >= IWL_RATE_INCREASE_TH) { + scale_action = 1; + } + } + } + + /* Sanity check; asked for decrease, but success rate or throughput + * has been good at old rate. Don't change it. */ + if ((scale_action == -1) && (low != IWL_RATE_INVALID) && + ((sr > IWL_RATE_HIGH_TH) || + (current_tpt > (100 * tbl->expected_tpt[low])))) + scale_action = 0; + + switch (scale_action) { + case -1: + /* Decrease starting rate, update uCode's rate table */ + if (low != IWL_RATE_INVALID) { + update_lq = 1; + index = low; + } + break; + case 1: + /* Increase starting rate, update uCode's rate table */ + if (high != IWL_RATE_INVALID) { + update_lq = 1; + index = high; + } + + break; + case 0: + /* No change */ + default: + break; + } + + IWL_DEBUG_RATE("choose rate scale index %d action %d low %d " + "high %d type %d\n", + index, scale_action, low, high, tbl->lq_type); + +lq_update: + /* Replace uCode's rate table for the destination station. */ + if (update_lq) { + rate = rate_n_flags_from_tbl(tbl, index, is_green); + rs_fill_link_cmd(priv, lq_sta, rate); + iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); + } + + /* Should we stay with this modulation mode, or search for a new one? */ + rs_stay_in_table(lq_sta); + + /* + * Search for new modulation mode if we're: + * 1) Not changing rates right now + * 2) Not just finishing up a search + * 3) Allowing a new search + */ + if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) { + /* Save current throughput to compare with "search" throughput*/ + lq_sta->last_tpt = current_tpt; + + /* Select a new "search" modulation mode to try. + * If one is found, set up the new "search" table. */ + if (is_legacy(tbl->lq_type)) + rs_move_legacy_other(priv, lq_sta, conf, sta, index); + else if (is_siso(tbl->lq_type)) + rs_move_siso_to_other(priv, lq_sta, conf, sta, index); + else + rs_move_mimo_to_other(priv, lq_sta, conf, sta, index); + + /* If new "search" mode was selected, set up in uCode table */ + if (lq_sta->search_better_tbl) { + /* Access the "search" table, clear its history. */ + tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&(tbl->win[i])); + + /* Use new "search" start rate */ + index = iwl_hwrate_to_plcp_idx(tbl->current_rate); + + IWL_DEBUG_RATE("Switch current mcs: %X index: %d\n", + tbl->current_rate, index); + rs_fill_link_cmd(priv, lq_sta, tbl->current_rate); + iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); + } + + /* If the "active" (non-search) mode was legacy, + * and we've tried switching antennas, + * but we haven't been able to try HT modes (not available), + * stay with best antenna legacy modulation for a while + * before next round of mode comparisons. */ + tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]); + if (is_legacy(tbl1->lq_type) && + (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) && + (lq_sta->action_counter >= 1)) { + lq_sta->action_counter = 0; + IWL_DEBUG_RATE("LQ: STAY in legacy table\n"); + rs_set_stay_in_table(priv, 1, lq_sta); + } + + /* If we're in an HT mode, and all 3 mode switch actions + * have been tried and compared, stay in this best modulation + * mode for a while before next round of mode comparisons. */ + if (lq_sta->enable_counter && + (lq_sta->action_counter >= IWL_ACTION_LIMIT)) { + if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) && + (lq_sta->tx_agg_tid_en & (1 << tid)) && + (tid != MAX_TID_COUNT)) { + IWL_DEBUG_RATE("try to aggregate tid %d\n", tid); + rs_tl_turn_on_agg(priv, tid, lq_sta, sta); + } + lq_sta->action_counter = 0; + rs_set_stay_in_table(priv, 0, lq_sta); + } + + /* + * Else, don't search for a new modulation mode. + * Put new timestamp in stay-in-modulation-mode flush timer if: + * 1) Not changing rates right now + * 2) Not just finishing up a search + * 3) flush timer is empty + */ + } else { + if ((!update_lq) && (!done_search) && (!lq_sta->flush_timer)) + lq_sta->flush_timer = jiffies; + } + +out: + tbl->current_rate = rate_n_flags_from_tbl(tbl, index, is_green); + i = index; + sta->last_txrate_idx = i; + + /* sta->txrate_idx is an index to A mode rates which start + * at IWL_FIRST_OFDM_RATE + */ + if (lq_sta->band == IEEE80211_BAND_5GHZ) + sta->txrate_idx = i - IWL_FIRST_OFDM_RATE; + else + sta->txrate_idx = i; + + return; +} + + +static void rs_initialize_lq(struct iwl_priv *priv, + struct ieee80211_conf *conf, + struct sta_info *sta) +{ + struct iwl_lq_sta *lq_sta; + struct iwl_scale_tbl_info *tbl; + int rate_idx; + int i; + u32 rate; + u8 use_green = rs_use_green(priv, conf); + u8 active_tbl = 0; + u8 valid_tx_ant; + + if (!sta || !sta->rate_ctrl_priv) + goto out; + + lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; + i = sta->last_txrate_idx; + + if ((lq_sta->lq.sta_id == 0xff) && + (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)) + goto out; + + valid_tx_ant = priv->hw_params.valid_tx_ant; + + if (!lq_sta->search_better_tbl) + active_tbl = lq_sta->active_tbl; + else + active_tbl = 1 - lq_sta->active_tbl; + + tbl = &(lq_sta->lq_info[active_tbl]); + + if ((i < 0) || (i >= IWL_RATE_COUNT)) + i = 0; + + /* FIXME:RS: This is also wrong in 4965 */ + rate = iwl_rates[i].plcp; + rate |= RATE_MCS_ANT_B_MSK; + rate &= ~RATE_MCS_ANT_A_MSK; + + if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE) + rate |= RATE_MCS_CCK_MSK; + + tbl->ant_type = ANT_B; + rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx); + if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type)) + rs_toggle_antenna(valid_tx_ant, &rate, tbl); + + rate = rate_n_flags_from_tbl(tbl, rate_idx, use_green); + tbl->current_rate = rate; + rs_set_expected_tpt_table(lq_sta, tbl); + rs_fill_link_cmd(NULL, lq_sta, rate); + iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); + out: + return; +} + +static void rs_get_rate(void *priv_rate, struct net_device *dev, + struct ieee80211_supported_band *sband, + struct sk_buff *skb, + struct rate_selection *sel) +{ + + int i; + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_conf *conf = &local->hw.conf; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct sta_info *sta; + __le16 fc; + struct iwl_priv *priv = (struct iwl_priv *)priv_rate; + struct iwl_lq_sta *lq_sta; + + IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n"); + + rcu_read_lock(); + + sta = sta_info_get(local, hdr->addr1); + + /* Send management frames and broadcast/multicast data using lowest + * rate. */ + fc = hdr->frame_control; + if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) || + !sta || !sta->rate_ctrl_priv) { + sel->rate_idx = rate_lowest_index(local, sband, sta); + goto out; + } + + lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; + i = sta->last_txrate_idx; + + if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && + !lq_sta->ibss_sta_added) { + u8 sta_id = iwl_find_station(priv, hdr->addr1); + DECLARE_MAC_BUF(mac); + + if (sta_id == IWL_INVALID_STATION) { + IWL_DEBUG_RATE("LQ: ADD station %s\n", + print_mac(mac, hdr->addr1)); + sta_id = iwl_add_station_flags(priv, hdr->addr1, + 0, CMD_ASYNC, NULL); + } + if ((sta_id != IWL_INVALID_STATION)) { + lq_sta->lq.sta_id = sta_id; + lq_sta->lq.rs_table[0].rate_n_flags = 0; + lq_sta->ibss_sta_added = 1; + rs_initialize_lq(priv, conf, sta); + } + } + + if ((i < 0) || (i > IWL_RATE_COUNT)) { + sel->rate_idx = rate_lowest_index(local, sband, sta); + goto out; + } + + if (sband->band == IEEE80211_BAND_5GHZ) + i -= IWL_FIRST_OFDM_RATE; + sel->rate_idx = i; +out: + rcu_read_unlock(); +} + +static void *rs_alloc_sta(void *priv_rate, gfp_t gfp) +{ + struct iwl_lq_sta *lq_sta; + struct iwl_priv *priv; + int i, j; + + priv = (struct iwl_priv *)priv_rate; + IWL_DEBUG_RATE("create station rate scale window\n"); + + lq_sta = kzalloc(sizeof(struct iwl_lq_sta), gfp); + + if (lq_sta == NULL) + return NULL; + lq_sta->lq.sta_id = 0xff; + + + for (j = 0; j < LQ_SIZE; j++) + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i])); + + return lq_sta; +} + +static void rs_rate_init(void *priv_rate, void *priv_sta, + struct ieee80211_local *local, + struct sta_info *sta) +{ + int i, j; + struct ieee80211_conf *conf = &local->hw.conf; + struct ieee80211_supported_band *sband; + struct iwl_priv *priv = (struct iwl_priv *)priv_rate; + struct iwl_lq_sta *lq_sta = priv_sta; + + sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + + lq_sta->flush_timer = 0; + lq_sta->supp_rates = sta->supp_rates[sband->band]; + sta->txrate_idx = 3; + for (j = 0; j < LQ_SIZE; j++) + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i])); + + IWL_DEBUG_RATE("LQ: *** rate scale global init ***\n"); + /* TODO: what is a good starting rate for STA? About middle? Maybe not + * the lowest or the highest rate.. Could consider using RSSI from + * previous packets? Need to have IEEE 802.1X auth succeed immediately + * after assoc.. */ + + lq_sta->ibss_sta_added = 0; + if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + u8 sta_id = iwl_find_station(priv, sta->addr); + DECLARE_MAC_BUF(mac); + + /* for IBSS the call are from tasklet */ + IWL_DEBUG_RATE("LQ: ADD station %s\n", + print_mac(mac, sta->addr)); + + if (sta_id == IWL_INVALID_STATION) { + IWL_DEBUG_RATE("LQ: ADD station %s\n", + print_mac(mac, sta->addr)); + sta_id = iwl_add_station_flags(priv, sta->addr, + 0, CMD_ASYNC, NULL); + } + if ((sta_id != IWL_INVALID_STATION)) { + lq_sta->lq.sta_id = sta_id; + lq_sta->lq.rs_table[0].rate_n_flags = 0; + } + /* FIXME: this is w/a remove it later */ + priv->assoc_station_added = 1; + } + + /* Find highest tx rate supported by hardware and destination station */ + for (i = 0; i < sband->n_bitrates; i++) + if (sta->supp_rates[sband->band] & BIT(i)) + sta->txrate_idx = i; + + sta->last_txrate_idx = sta->txrate_idx; + /* WTF is with this bogus comment? A doesn't have cck rates */ + /* For MODE_IEEE80211A, cck rates are at end of rate table */ + if (local->hw.conf.channel->band == IEEE80211_BAND_5GHZ) + sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; + + lq_sta->is_dup = 0; + lq_sta->is_green = rs_use_green(priv, conf); + lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000); + lq_sta->active_rate_basic = priv->active_rate_basic; + lq_sta->band = priv->band; + /* + * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3), + * supp_rates[] does not; shift to convert format, force 9 MBits off. + */ + lq_sta->active_siso_rate = conf->ht_conf.supp_mcs_set[0] << 1; + lq_sta->active_siso_rate |= conf->ht_conf.supp_mcs_set[0] & 0x1; + lq_sta->active_siso_rate &= ~((u16)0x2); + lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE; + + /* Same here */ + lq_sta->active_mimo2_rate = conf->ht_conf.supp_mcs_set[1] << 1; + lq_sta->active_mimo2_rate |= conf->ht_conf.supp_mcs_set[1] & 0x1; + lq_sta->active_mimo2_rate &= ~((u16)0x2); + lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE; + + lq_sta->active_mimo3_rate = conf->ht_conf.supp_mcs_set[2] << 1; + lq_sta->active_mimo3_rate |= conf->ht_conf.supp_mcs_set[2] & 0x1; + lq_sta->active_mimo3_rate &= ~((u16)0x2); + lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE; + + IWL_DEBUG_RATE("SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n", + lq_sta->active_siso_rate, + lq_sta->active_mimo2_rate, + lq_sta->active_mimo3_rate); + + /* These values will be overriden later */ + lq_sta->lq.general_params.single_stream_ant_msk = ANT_A; + lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB; + + /* as default allow aggregation for all tids */ + lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID; + lq_sta->drv = priv; + + rs_initialize_lq(priv, conf, sta); +} + +static void rs_fill_link_cmd(const struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, u32 new_rate) +{ + struct iwl_scale_tbl_info tbl_type; + int index = 0; + int rate_idx; + int repeat_rate = 0; + u8 ant_toggle_cnt = 0; + u8 use_ht_possible = 1; + u8 valid_tx_ant = 0; + struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq; + + /* Override starting rate (index 0) if needed for debug purposes */ + rs_dbgfs_set_mcs(lq_sta, &new_rate, index); + + /* Interpret new_rate (rate_n_flags) */ + memset(&tbl_type, 0, sizeof(tbl_type)); + rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, + &tbl_type, &rate_idx); + + /* How many times should we repeat the initial rate? */ + if (is_legacy(tbl_type.lq_type)) { + ant_toggle_cnt = 1; + repeat_rate = IWL_NUMBER_TRY; + } else { + repeat_rate = IWL_HT_NUMBER_TRY; + } + + lq_cmd->general_params.mimo_delimiter = + is_mimo(tbl_type.lq_type) ? 1 : 0; + + /* Fill 1st table entry (index 0) */ + lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); + + if (num_of_ant(tbl_type.ant_type) == 1) { + lq_cmd->general_params.single_stream_ant_msk = + tbl_type.ant_type; + } else if (num_of_ant(tbl_type.ant_type) == 2) { + lq_cmd->general_params.dual_stream_ant_msk = + tbl_type.ant_type; + } /* otherwise we don't modify the existing value */ + + index++; + repeat_rate--; + + if (priv) + valid_tx_ant = priv->hw_params.valid_tx_ant; + + /* Fill rest of rate table */ + while (index < LINK_QUAL_MAX_RETRY_NUM) { + /* Repeat initial/next rate. + * For legacy IWL_NUMBER_TRY == 1, this loop will not execute. + * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */ + while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) { + if (is_legacy(tbl_type.lq_type)) { + if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) + ant_toggle_cnt++; + else if (priv && + rs_toggle_antenna(valid_tx_ant, + &new_rate, &tbl_type)) + ant_toggle_cnt = 1; +} + + /* Override next rate if needed for debug purposes */ + rs_dbgfs_set_mcs(lq_sta, &new_rate, index); + + /* Fill next table entry */ + lq_cmd->rs_table[index].rate_n_flags = + cpu_to_le32(new_rate); + repeat_rate--; + index++; + } + + rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type, + &rate_idx); + + /* Indicate to uCode which entries might be MIMO. + * If initial rate was MIMO, this will finally end up + * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */ + if (is_mimo(tbl_type.lq_type)) + lq_cmd->general_params.mimo_delimiter = index; + + /* Get next rate */ + new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx, + use_ht_possible); + + /* How many times should we repeat the next rate? */ + if (is_legacy(tbl_type.lq_type)) { + if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) + ant_toggle_cnt++; + else if (priv && + rs_toggle_antenna(valid_tx_ant, + &new_rate, &tbl_type)) + ant_toggle_cnt = 1; + + repeat_rate = IWL_NUMBER_TRY; + } else { + repeat_rate = IWL_HT_NUMBER_TRY; + } + + /* Don't allow HT rates after next pass. + * rs_get_lower_rate() will change type to LQ_A or LQ_G. */ + use_ht_possible = 0; + + /* Override next rate if needed for debug purposes */ + rs_dbgfs_set_mcs(lq_sta, &new_rate, index); + + /* Fill next table entry */ + lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); + + index++; + repeat_rate--; + } + + lq_cmd->agg_params.agg_frame_cnt_limit = 64; + lq_cmd->agg_params.agg_dis_start_th = 3; + lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000); +} + +static void *rs_alloc(struct ieee80211_local *local) +{ + return local->hw.priv; +} +/* rate scale requires free function to be implemented */ +static void rs_free(void *priv_rate) +{ + return; +} + +static void rs_clear(void *priv_rate) +{ + struct iwl_priv *priv = (struct iwl_priv *) priv_rate; + + IWL_DEBUG_RATE("enter\n"); + + /* TODO - add rate scale state reset */ + + IWL_DEBUG_RATE("leave\n"); +} + +static void rs_free_sta(void *priv_rate, void *priv_sta) +{ + struct iwl_lq_sta *lq_sta = priv_sta; + struct iwl_priv *priv; + + priv = (struct iwl_priv *)priv_rate; + IWL_DEBUG_RATE("enter\n"); + kfree(lq_sta); + IWL_DEBUG_RATE("leave\n"); +} + + +#ifdef CONFIG_MAC80211_DEBUGFS +static int open_file_generic(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} +static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, + u32 *rate_n_flags, int index) +{ + struct iwl_priv *priv; + + priv = lq_sta->drv; + if (lq_sta->dbg_fixed_rate) { + if (index < 12) { + *rate_n_flags = lq_sta->dbg_fixed_rate; + } else { + if (lq_sta->band == IEEE80211_BAND_5GHZ) + *rate_n_flags = 0x800D; + else + *rate_n_flags = 0x820A; + } + IWL_DEBUG_RATE("Fixed rate ON\n"); + } else { + IWL_DEBUG_RATE("Fixed rate OFF\n"); + } +} + +static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, + const char __user *user_buf, size_t count, loff_t *ppos) +{ + struct iwl_lq_sta *lq_sta = file->private_data; + struct iwl_priv *priv; + char buf[64]; + int buf_size; + u32 parsed_rate; + + priv = lq_sta->drv; + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + if (sscanf(buf, "%x", &parsed_rate) == 1) + lq_sta->dbg_fixed_rate = parsed_rate; + else + lq_sta->dbg_fixed_rate = 0; + + lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ + lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + lq_sta->active_mimo3_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + + IWL_DEBUG_RATE("sta_id %d rate 0x%X\n", + lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate); + + if (lq_sta->dbg_fixed_rate) { + rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate); + iwl_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC); + } + + return count; +} + +static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, + char __user *user_buf, size_t count, loff_t *ppos) +{ + char buff[1024]; + int desc = 0; + int i = 0; + + struct iwl_lq_sta *lq_sta = file->private_data; + + desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id); + desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n", + lq_sta->total_failed, lq_sta->total_success, + lq_sta->active_legacy_rate); + desc += sprintf(buff+desc, "fixed rate 0x%X\n", + lq_sta->dbg_fixed_rate); + desc += sprintf(buff+desc, "general:" + "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n", + lq_sta->lq.general_params.flags, + lq_sta->lq.general_params.mimo_delimiter, + lq_sta->lq.general_params.single_stream_ant_msk, + lq_sta->lq.general_params.dual_stream_ant_msk); + + desc += sprintf(buff+desc, "agg:" + "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n", + le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit), + lq_sta->lq.agg_params.agg_dis_start_th, + lq_sta->lq.agg_params.agg_frame_cnt_limit); + + desc += sprintf(buff+desc, + "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n", + lq_sta->lq.general_params.start_rate_index[0], + lq_sta->lq.general_params.start_rate_index[1], + lq_sta->lq.general_params.start_rate_index[2], + lq_sta->lq.general_params.start_rate_index[3]); + + + for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) + desc += sprintf(buff+desc, " rate[%d] 0x%X\n", + i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags)); + + return simple_read_from_buffer(user_buf, count, ppos, buff, desc); +} + +static const struct file_operations rs_sta_dbgfs_scale_table_ops = { + .write = rs_sta_dbgfs_scale_table_write, + .read = rs_sta_dbgfs_scale_table_read, + .open = open_file_generic, +}; +static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, + char __user *user_buf, size_t count, loff_t *ppos) +{ + char buff[1024]; + int desc = 0; + int i, j; + + struct iwl_lq_sta *lq_sta = file->private_data; + for (i = 0; i < LQ_SIZE; i++) { + desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d\n" + "rate=0x%X\n", + lq_sta->active_tbl == i?"*":"x", + lq_sta->lq_info[i].lq_type, + lq_sta->lq_info[i].is_SGI, + lq_sta->lq_info[i].is_fat, + lq_sta->lq_info[i].is_dup, + lq_sta->lq_info[i].current_rate); + for (j = 0; j < IWL_RATE_COUNT; j++) { + desc += sprintf(buff+desc, + "counter=%d success=%d %%=%d\n", + lq_sta->lq_info[i].win[j].counter, + lq_sta->lq_info[i].win[j].success_counter, + lq_sta->lq_info[i].win[j].success_ratio); + } + } + return simple_read_from_buffer(user_buf, count, ppos, buff, desc); +} + +static const struct file_operations rs_sta_dbgfs_stats_table_ops = { + .read = rs_sta_dbgfs_stats_table_read, + .open = open_file_generic, +}; + +static void rs_add_debugfs(void *priv, void *priv_sta, + struct dentry *dir) +{ + struct iwl_lq_sta *lq_sta = priv_sta; + lq_sta->rs_sta_dbgfs_scale_table_file = + debugfs_create_file("rate_scale_table", 0600, dir, + lq_sta, &rs_sta_dbgfs_scale_table_ops); + lq_sta->rs_sta_dbgfs_stats_table_file = + debugfs_create_file("rate_stats_table", 0600, dir, + lq_sta, &rs_sta_dbgfs_stats_table_ops); + lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file = + debugfs_create_u8("tx_agg_tid_enable", 0600, dir, + &lq_sta->tx_agg_tid_en); + +} + +static void rs_remove_debugfs(void *priv, void *priv_sta) +{ + struct iwl_lq_sta *lq_sta = priv_sta; + debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file); + debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); + debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file); +} +#endif + +static struct rate_control_ops rs_ops = { + .module = NULL, + .name = RS_NAME, + .tx_status = rs_tx_status, + .get_rate = rs_get_rate, + .rate_init = rs_rate_init, + .clear = rs_clear, + .alloc = rs_alloc, + .free = rs_free, + .alloc_sta = rs_alloc_sta, + .free_sta = rs_free_sta, +#ifdef CONFIG_MAC80211_DEBUGFS + .add_sta_debugfs = rs_add_debugfs, + .remove_sta_debugfs = rs_remove_debugfs, +#endif +}; + +int iwl4965_fill_rs_info(struct ieee80211_hw *hw, char *buf, u8 sta_id) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct iwl_priv *priv = hw->priv; + struct iwl_lq_sta *lq_sta; + struct sta_info *sta; + int cnt = 0, i; + u32 samples = 0, success = 0, good = 0; + unsigned long now = jiffies; + u32 max_time = 0; + u8 lq_type, antenna; + + rcu_read_lock(); + + sta = sta_info_get(local, priv->stations[sta_id].sta.sta.addr); + if (!sta || !sta->rate_ctrl_priv) { + if (sta) + IWL_DEBUG_RATE("leave - no private rate data!\n"); + else + IWL_DEBUG_RATE("leave - no station!\n"); + rcu_read_unlock(); + return sprintf(buf, "station %d not found\n", sta_id); + } + + lq_sta = (void *)sta->rate_ctrl_priv; + + lq_type = lq_sta->lq_info[lq_sta->active_tbl].lq_type; + antenna = lq_sta->lq_info[lq_sta->active_tbl].ant_type; + + if (is_legacy(lq_type)) + i = IWL_RATE_54M_INDEX; + else + i = IWL_RATE_60M_INDEX; + while (1) { + u64 mask; + int j; + int active = lq_sta->active_tbl; + + cnt += + sprintf(&buf[cnt], " %2dMbs: ", iwl_rates[i].ieee / 2); + + mask = (1ULL << (IWL_RATE_MAX_WINDOW - 1)); + for (j = 0; j < IWL_RATE_MAX_WINDOW; j++, mask >>= 1) + buf[cnt++] = + (lq_sta->lq_info[active].win[i].data & mask) + ? '1' : '0'; + + samples += lq_sta->lq_info[active].win[i].counter; + good += lq_sta->lq_info[active].win[i].success_counter; + success += lq_sta->lq_info[active].win[i].success_counter * + iwl_rates[i].ieee; + + if (lq_sta->lq_info[active].win[i].stamp) { + int delta = + jiffies_to_msecs(now - + lq_sta->lq_info[active].win[i].stamp); + + if (delta > max_time) + max_time = delta; + + cnt += sprintf(&buf[cnt], "%5dms\n", delta); + } else + buf[cnt++] = '\n'; + + j = iwl4965_get_prev_ieee_rate(i); + if (j == i) + break; + i = j; + } + + /* + * Display the average rate of all samples taken. + * NOTE: We multiply # of samples by 2 since the IEEE measurement + * added from iwl_rates is actually 2X the rate. + */ + if (samples) + cnt += sprintf(&buf[cnt], + "\nAverage rate is %3d.%02dMbs over last %4dms\n" + "%3d%% success (%d good packets over %d tries)\n", + success / (2 * samples), (success * 5 / samples) % 10, + max_time, good * 100 / samples, good, samples); + else + cnt += sprintf(&buf[cnt], "\nAverage rate: 0Mbs\n"); + + cnt += sprintf(&buf[cnt], "\nrate scale type %d antenna %d " + "active_search %d rate index %d\n", lq_type, antenna, + lq_sta->search_better_tbl, sta->last_txrate_idx); + + rcu_read_unlock(); + return cnt; +} + +int iwlagn_rate_control_register(void) +{ + return ieee80211_rate_control_register(&rs_ops); +} + +void iwlagn_rate_control_unregister(void) +{ + ieee80211_rate_control_unregister(&rs_ops); +} + diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h new file mode 100644 index 000000000000..3b06c9da77e3 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h @@ -0,0 +1,318 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * James P. Ketrenos + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#ifndef __iwl_agn_rs_h__ +#define __iwl_agn_rs_h__ + +#include "iwl-dev.h" + +struct iwl_rate_info { + u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */ + u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */ + u8 plcp_mimo2; /* uCode API: IWL_RATE_MIMO2_6M_PLCP, etc. */ + u8 plcp_mimo3; /* uCode API: IWL_RATE_MIMO3_6M_PLCP, etc. */ + u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */ + u8 prev_ieee; /* previous rate in IEEE speeds */ + u8 next_ieee; /* next rate in IEEE speeds */ + u8 prev_rs; /* previous rate used in rs algo */ + u8 next_rs; /* next rate used in rs algo */ + u8 prev_rs_tgg; /* previous rate used in TGG rs algo */ + u8 next_rs_tgg; /* next rate used in TGG rs algo */ +}; + +/* + * These serve as indexes into + * struct iwl_rate_info iwl_rates[IWL_RATE_COUNT]; + */ +enum { + IWL_RATE_1M_INDEX = 0, + IWL_RATE_2M_INDEX, + IWL_RATE_5M_INDEX, + IWL_RATE_11M_INDEX, + IWL_RATE_6M_INDEX, + IWL_RATE_9M_INDEX, + IWL_RATE_12M_INDEX, + IWL_RATE_18M_INDEX, + IWL_RATE_24M_INDEX, + IWL_RATE_36M_INDEX, + IWL_RATE_48M_INDEX, + IWL_RATE_54M_INDEX, + IWL_RATE_60M_INDEX, + IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/ + IWL_RATE_INVM_INDEX = IWL_RATE_COUNT, + IWL_RATE_INVALID = IWL_RATE_COUNT, +}; + +enum { + IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX, + IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX, + IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX, + IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX, +}; + +/* #define vs. enum to keep from defaulting to 'large integer' */ +#define IWL_RATE_6M_MASK (1 << IWL_RATE_6M_INDEX) +#define IWL_RATE_9M_MASK (1 << IWL_RATE_9M_INDEX) +#define IWL_RATE_12M_MASK (1 << IWL_RATE_12M_INDEX) +#define IWL_RATE_18M_MASK (1 << IWL_RATE_18M_INDEX) +#define IWL_RATE_24M_MASK (1 << IWL_RATE_24M_INDEX) +#define IWL_RATE_36M_MASK (1 << IWL_RATE_36M_INDEX) +#define IWL_RATE_48M_MASK (1 << IWL_RATE_48M_INDEX) +#define IWL_RATE_54M_MASK (1 << IWL_RATE_54M_INDEX) +#define IWL_RATE_60M_MASK (1 << IWL_RATE_60M_INDEX) +#define IWL_RATE_1M_MASK (1 << IWL_RATE_1M_INDEX) +#define IWL_RATE_2M_MASK (1 << IWL_RATE_2M_INDEX) +#define IWL_RATE_5M_MASK (1 << IWL_RATE_5M_INDEX) +#define IWL_RATE_11M_MASK (1 << IWL_RATE_11M_INDEX) + +/* uCode API values for legacy bit rates, both OFDM and CCK */ +enum { + IWL_RATE_6M_PLCP = 13, + IWL_RATE_9M_PLCP = 15, + IWL_RATE_12M_PLCP = 5, + IWL_RATE_18M_PLCP = 7, + IWL_RATE_24M_PLCP = 9, + IWL_RATE_36M_PLCP = 11, + IWL_RATE_48M_PLCP = 1, + IWL_RATE_54M_PLCP = 3, + IWL_RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/ + IWL_RATE_1M_PLCP = 10, + IWL_RATE_2M_PLCP = 20, + IWL_RATE_5M_PLCP = 55, + IWL_RATE_11M_PLCP = 110, + /*FIXME:RS:change to IWL_RATE_LEGACY_??M_PLCP */ + /*FIXME:RS:add IWL_RATE_LEGACY_INVM_PLCP = 0,*/ +}; + +/* uCode API values for OFDM high-throughput (HT) bit rates */ +enum { + IWL_RATE_SISO_6M_PLCP = 0, + IWL_RATE_SISO_12M_PLCP = 1, + IWL_RATE_SISO_18M_PLCP = 2, + IWL_RATE_SISO_24M_PLCP = 3, + IWL_RATE_SISO_36M_PLCP = 4, + IWL_RATE_SISO_48M_PLCP = 5, + IWL_RATE_SISO_54M_PLCP = 6, + IWL_RATE_SISO_60M_PLCP = 7, + IWL_RATE_MIMO2_6M_PLCP = 0x8, + IWL_RATE_MIMO2_12M_PLCP = 0x9, + IWL_RATE_MIMO2_18M_PLCP = 0xa, + IWL_RATE_MIMO2_24M_PLCP = 0xb, + IWL_RATE_MIMO2_36M_PLCP = 0xc, + IWL_RATE_MIMO2_48M_PLCP = 0xd, + IWL_RATE_MIMO2_54M_PLCP = 0xe, + IWL_RATE_MIMO2_60M_PLCP = 0xf, + IWL_RATE_MIMO3_6M_PLCP = 0x10, + IWL_RATE_MIMO3_12M_PLCP = 0x11, + IWL_RATE_MIMO3_18M_PLCP = 0x12, + IWL_RATE_MIMO3_24M_PLCP = 0x13, + IWL_RATE_MIMO3_36M_PLCP = 0x14, + IWL_RATE_MIMO3_48M_PLCP = 0x15, + IWL_RATE_MIMO3_54M_PLCP = 0x16, + IWL_RATE_MIMO3_60M_PLCP = 0x17, + IWL_RATE_SISO_INVM_PLCP, + IWL_RATE_MIMO2_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, + IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, +}; + +/* MAC header values for bit rates */ +enum { + IWL_RATE_6M_IEEE = 12, + IWL_RATE_9M_IEEE = 18, + IWL_RATE_12M_IEEE = 24, + IWL_RATE_18M_IEEE = 36, + IWL_RATE_24M_IEEE = 48, + IWL_RATE_36M_IEEE = 72, + IWL_RATE_48M_IEEE = 96, + IWL_RATE_54M_IEEE = 108, + IWL_RATE_60M_IEEE = 120, + IWL_RATE_1M_IEEE = 2, + IWL_RATE_2M_IEEE = 4, + IWL_RATE_5M_IEEE = 11, + IWL_RATE_11M_IEEE = 22, +}; + +#define IWL_CCK_BASIC_RATES_MASK \ + (IWL_RATE_1M_MASK | \ + IWL_RATE_2M_MASK) + +#define IWL_CCK_RATES_MASK \ + (IWL_BASIC_RATES_MASK | \ + IWL_RATE_5M_MASK | \ + IWL_RATE_11M_MASK) + +#define IWL_OFDM_BASIC_RATES_MASK \ + (IWL_RATE_6M_MASK | \ + IWL_RATE_12M_MASK | \ + IWL_RATE_24M_MASK) + +#define IWL_OFDM_RATES_MASK \ + (IWL_OFDM_BASIC_RATES_MASK | \ + IWL_RATE_9M_MASK | \ + IWL_RATE_18M_MASK | \ + IWL_RATE_36M_MASK | \ + IWL_RATE_48M_MASK | \ + IWL_RATE_54M_MASK) + +#define IWL_BASIC_RATES_MASK \ + (IWL_OFDM_BASIC_RATES_MASK | \ + IWL_CCK_BASIC_RATES_MASK) + +#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1) + +#define IWL_INVALID_VALUE -1 + +#define IWL_MIN_RSSI_VAL -100 +#define IWL_MAX_RSSI_VAL 0 + +/* These values specify how many Tx frame attempts before + * searching for a new modulation mode */ +#define IWL_LEGACY_FAILURE_LIMIT 160 +#define IWL_LEGACY_SUCCESS_LIMIT 480 +#define IWL_LEGACY_TABLE_COUNT 160 + +#define IWL_NONE_LEGACY_FAILURE_LIMIT 400 +#define IWL_NONE_LEGACY_SUCCESS_LIMIT 4500 +#define IWL_NONE_LEGACY_TABLE_COUNT 1500 + +/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */ +#define IWL_RS_GOOD_RATIO 12800 /* 100% */ +#define IWL_RATE_SCALE_SWITCH 10880 /* 85% */ +#define IWL_RATE_HIGH_TH 10880 /* 85% */ +#define IWL_RATE_INCREASE_TH 8960 /* 70% */ +#define IWL_RATE_DECREASE_TH 1920 /* 15% */ + +/* possible actions when in legacy mode */ +#define IWL_LEGACY_SWITCH_ANTENNA 0 +#define IWL_LEGACY_SWITCH_SISO 1 +#define IWL_LEGACY_SWITCH_MIMO2 2 + +/* possible actions when in siso mode */ +#define IWL_SISO_SWITCH_ANTENNA 0 +#define IWL_SISO_SWITCH_MIMO2 1 +#define IWL_SISO_SWITCH_GI 2 + +/* possible actions when in mimo mode */ +#define IWL_MIMO_SWITCH_ANTENNA_A 0 +#define IWL_MIMO_SWITCH_ANTENNA_B 1 +#define IWL_MIMO_SWITCH_GI 2 + +/*FIXME:RS:separate MIMO2/3 transitions*/ + +/*FIXME:RS:add posible acctions for MIMO3*/ + +#define IWL_ACTION_LIMIT 3 /* # possible actions */ + +#define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */ + +/* load per tid defines for A-MPDU activation */ +#define IWL_AGG_TPT_THREHOLD 0 +#define IWL_AGG_LOAD_THRESHOLD 10 +#define IWL_AGG_ALL_TID 0xff +#define TID_QUEUE_CELL_SPACING 50 /*mS */ +#define TID_QUEUE_MAX_SIZE 20 +#define TID_ROUND_VALUE 5 /* mS */ +#define TID_MAX_LOAD_COUNT 8 + +#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING) +#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y)) + +extern const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT]; + +enum iwl_table_type { + LQ_NONE, + LQ_G, /* legacy types */ + LQ_A, + LQ_SISO, /* high-throughput types */ + LQ_MIMO2, + LQ_MIMO3, + LQ_MAX, +}; + +#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A)) +#define is_siso(tbl) ((tbl) == LQ_SISO) +#define is_mimo2(tbl) ((tbl) == LQ_MIMO2) +#define is_mimo3(tbl) ((tbl) == LQ_MIMO3) +#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl)) +#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl)) +#define is_a_band(tbl) ((tbl) == LQ_A) +#define is_g_and(tbl) ((tbl) == LQ_G) + +#define ANT_NONE 0x0 +#define ANT_A BIT(0) +#define ANT_B BIT(1) +#define ANT_AB (ANT_A | ANT_B) +#define ANT_C BIT(2) +#define ANT_AC (ANT_A | ANT_C) +#define ANT_BC (ANT_B | ANT_C) +#define ANT_ABC (ANT_AB | ANT_C) + +static inline u8 num_of_ant(u8 mask) +{ + return !!((mask) & ANT_A) + + !!((mask) & ANT_B) + + !!((mask) & ANT_C); +} + +static inline u8 iwl4965_get_prev_ieee_rate(u8 rate_index) +{ + u8 rate = iwl_rates[rate_index].prev_ieee; + + if (rate == IWL_RATE_INVALID) + rate = rate_index; + return rate; +} + +/** + * iwl4965_fill_rs_info - Fill an output text buffer with the rate representation + * + * NOTE: This is provided as a quick mechanism for a user to visualize + * the performance of the rate control algorithm and is not meant to be + * parsed software. + */ +extern int iwl4965_fill_rs_info(struct ieee80211_hw *, char *buf, u8 sta_id); + +/** + * iwl4965_rate_control_register - Register the rate control algorithm callbacks + * + * Since the rate control algorithm is hardware specific, there is no need + * or reason to place it as a stand alone module. The driver can call + * iwl4965_rate_control_register in order to register the rate control callbacks + * with the mac80211 subsystem. This should be performed prior to calling + * ieee80211_register_hw + * + */ +extern int iwlagn_rate_control_register(void); + +/** + * iwl4965_rate_control_unregister - Unregister the rate control callbacks + * + * This should be called after calling ieee80211_unregister_hw, but before + * the driver is unloaded. + */ +extern void iwlagn_rate_control_unregister(void); + +#endif /* __iwl_agn__rs__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index e3427c205ccf..60d443e77c38 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -815,7 +815,7 @@ int iwl_setup_mac(struct iwl_priv *priv) { int ret; struct ieee80211_hw *hw = priv->hw; - hw->rate_control_algorithm = "iwl-4965-rs"; + hw->rate_control_algorithm = "iwl-agn-rs"; /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index ff16cca2b8c7..7ac56b1350b7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -45,6 +45,7 @@ #include "iwl-debug.h" #include "iwl-led.h" #include "iwl-power.h" +#include "iwl-agn-rs.h" /* configuration for the iwl4965 */ extern struct iwl_cfg iwl4965_agn_cfg; @@ -191,7 +192,6 @@ struct iwl4965_clip_group { const s8 clip_powers[IWL_MAX_RATES]; }; -#include "iwl-4965-rs.h" #define IWL_TX_FIFO_AC0 0 #define IWL_TX_FIFO_AC1 1 diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 6d1467d0bd9d..10af82170f6b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -839,7 +839,7 @@ EXPORT_SYMBOL(iwl_send_lq_cmd); * for automatic fallback during transmission. * * NOTE: This sets up a default set of values. These will be replaced later - * if the driver's iwl-4965-rs rate scaling algorithm is used, instead of + * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of * rc80211_simple. * * NOTE: Run REPLY_ADD_STA command to set up station table entry, before diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index ac02342d2281..dcd11e9bd86c 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -4503,7 +4503,7 @@ static int __init iwl4965_init(void) printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n"); printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n"); - ret = iwl4965_rate_control_register(); + ret = iwlagn_rate_control_register(); if (ret) { IWL_ERROR("Unable to register rate control algorithm: %d\n", ret); return ret; @@ -4518,14 +4518,14 @@ static int __init iwl4965_init(void) return ret; error_register: - iwl4965_rate_control_unregister(); + iwlagn_rate_control_unregister(); return ret; } static void __exit iwl4965_exit(void) { pci_unregister_driver(&iwl_driver); - iwl4965_rate_control_unregister(); + iwlagn_rate_control_unregister(); } module_exit(iwl4965_exit); -- cgit v1.2.3 From 3ce84b9f2f495f59c4a4e68d814c348eaa497f65 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 18 Jul 2008 13:53:06 +0800 Subject: iwlwifi: kill iwl4965_fill_rs_info iwl4965_fill_rs_info was used in sysfs. This info is already present in iwl-agn-rs debugfs. Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 92 ----------------------------- drivers/net/wireless/iwlwifi/iwl-agn-rs.h | 9 --- drivers/net/wireless/iwlwifi/iwl4965-base.c | 10 ---- 3 files changed, 111 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index eee22c6dec73..0e8100e70620 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -2600,98 +2600,6 @@ static struct rate_control_ops rs_ops = { #endif }; -int iwl4965_fill_rs_info(struct ieee80211_hw *hw, char *buf, u8 sta_id) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct iwl_priv *priv = hw->priv; - struct iwl_lq_sta *lq_sta; - struct sta_info *sta; - int cnt = 0, i; - u32 samples = 0, success = 0, good = 0; - unsigned long now = jiffies; - u32 max_time = 0; - u8 lq_type, antenna; - - rcu_read_lock(); - - sta = sta_info_get(local, priv->stations[sta_id].sta.sta.addr); - if (!sta || !sta->rate_ctrl_priv) { - if (sta) - IWL_DEBUG_RATE("leave - no private rate data!\n"); - else - IWL_DEBUG_RATE("leave - no station!\n"); - rcu_read_unlock(); - return sprintf(buf, "station %d not found\n", sta_id); - } - - lq_sta = (void *)sta->rate_ctrl_priv; - - lq_type = lq_sta->lq_info[lq_sta->active_tbl].lq_type; - antenna = lq_sta->lq_info[lq_sta->active_tbl].ant_type; - - if (is_legacy(lq_type)) - i = IWL_RATE_54M_INDEX; - else - i = IWL_RATE_60M_INDEX; - while (1) { - u64 mask; - int j; - int active = lq_sta->active_tbl; - - cnt += - sprintf(&buf[cnt], " %2dMbs: ", iwl_rates[i].ieee / 2); - - mask = (1ULL << (IWL_RATE_MAX_WINDOW - 1)); - for (j = 0; j < IWL_RATE_MAX_WINDOW; j++, mask >>= 1) - buf[cnt++] = - (lq_sta->lq_info[active].win[i].data & mask) - ? '1' : '0'; - - samples += lq_sta->lq_info[active].win[i].counter; - good += lq_sta->lq_info[active].win[i].success_counter; - success += lq_sta->lq_info[active].win[i].success_counter * - iwl_rates[i].ieee; - - if (lq_sta->lq_info[active].win[i].stamp) { - int delta = - jiffies_to_msecs(now - - lq_sta->lq_info[active].win[i].stamp); - - if (delta > max_time) - max_time = delta; - - cnt += sprintf(&buf[cnt], "%5dms\n", delta); - } else - buf[cnt++] = '\n'; - - j = iwl4965_get_prev_ieee_rate(i); - if (j == i) - break; - i = j; - } - - /* - * Display the average rate of all samples taken. - * NOTE: We multiply # of samples by 2 since the IEEE measurement - * added from iwl_rates is actually 2X the rate. - */ - if (samples) - cnt += sprintf(&buf[cnt], - "\nAverage rate is %3d.%02dMbs over last %4dms\n" - "%3d%% success (%d good packets over %d tries)\n", - success / (2 * samples), (success * 5 / samples) % 10, - max_time, good * 100 / samples, good, samples); - else - cnt += sprintf(&buf[cnt], "\nAverage rate: 0Mbs\n"); - - cnt += sprintf(&buf[cnt], "\nrate scale type %d antenna %d " - "active_search %d rate index %d\n", lq_type, antenna, - lq_sta->search_better_tbl, sta->last_txrate_idx); - - rcu_read_unlock(); - return cnt; -} - int iwlagn_rate_control_register(void) { return ieee80211_rate_control_register(&rs_ops); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h index 3b06c9da77e3..84d4d1e33755 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h @@ -286,15 +286,6 @@ static inline u8 iwl4965_get_prev_ieee_rate(u8 rate_index) return rate; } -/** - * iwl4965_fill_rs_info - Fill an output text buffer with the rate representation - * - * NOTE: This is provided as a quick mechanism for a user to visualize - * the performance of the rate control algorithm and is not meant to be - * parsed software. - */ -extern int iwl4965_fill_rs_info(struct ieee80211_hw *, char *buf, u8 sta_id); - /** * iwl4965_rate_control_register - Register the rate control algorithm callbacks * diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index dcd11e9bd86c..9db6aac02185 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -3687,15 +3687,6 @@ static ssize_t show_temperature(struct device *d, static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); -static ssize_t show_rs_window(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct iwl_priv *priv = d->driver_data; - return iwl4965_fill_rs_info(priv->hw, buf, IWL_AP_ID); -} -static DEVICE_ATTR(rs_window, S_IRUGO, show_rs_window, NULL); - static ssize_t show_tx_power(struct device *d, struct device_attribute *attr, char *buf) { @@ -4118,7 +4109,6 @@ static struct attribute *iwl4965_sysfs_entries[] = { #endif &dev_attr_power_level.attr, &dev_attr_retry_rate.attr, - &dev_attr_rs_window.attr, &dev_attr_statistics.attr, &dev_attr_status.attr, &dev_attr_temperature.attr, -- cgit v1.2.3 From c785d1d5018b93878a9280b0c04df96682cc6eff Mon Sep 17 00:00:00 2001 From: Esti Kummer Date: Fri, 18 Jul 2008 13:53:07 +0800 Subject: iwlwifi: set led register in disassociation This patch sets the led register in disassociation flow according to rf-kill state : off - in case of rf_kill, on - otherwise. Signed-off-by: Esti Kummer Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-led.c | 40 ++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c index 61250e6a7d1b..0a01f091c516 100644 --- a/drivers/net/wireless/iwlwifi/iwl-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-led.c @@ -161,11 +161,31 @@ int iwl4965_led_off(struct iwl_priv *priv, int led_id) /* Set led register off */ static int iwl4965_led_off_reg(struct iwl_priv *priv, int led_id) { - IWL_DEBUG_LED("radio off\n"); + IWL_DEBUG_LED("LED Reg off\n"); iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_OFF); return 0; } +/* + * Set led register in case of disassociation according to rfkill state + */ +static int iwl_led_associate(struct iwl_priv *priv, int led_id) +{ + IWL_DEBUG_LED("Associated\n"); + priv->allow_blinking = 1; + return iwl4965_led_on_reg(priv, led_id); +} +static int iwl_led_disassociate(struct iwl_priv *priv, int led_id) +{ + priv->allow_blinking = 0; + if (iwl_is_rfkill(priv)) + iwl4965_led_off_reg(priv, led_id); + else + iwl4965_led_on_reg(priv, led_id); + + return 0; +} + /* * brightness call back function for Tx/Rx LED */ @@ -199,16 +219,10 @@ static void iwl_led_brightness_set(struct led_classdev *led_cdev, led_type_str[led->type], brightness); switch (brightness) { case LED_FULL: - if (led->type == IWL_LED_TRG_ASSOC) - priv->allow_blinking = 1; - if (led->led_on) led->led_on(priv, IWL_LED_LINK); break; case LED_OFF: - if (led->type == IWL_LED_TRG_ASSOC) - priv->allow_blinking = 0; - if (led->led_off) led->led_off(priv, IWL_LED_LINK); break; @@ -284,12 +298,6 @@ static int iwl_get_blink_rate(struct iwl_priv *priv) return i; } -static inline int is_rf_kill(struct iwl_priv *priv) -{ - return test_bit(STATUS_RF_KILL_HW, &priv->status) || - test_bit(STATUS_RF_KILL_SW, &priv->status); -} - /* * this function called from handler. Since setting Led command can * happen very frequent we postpone led command to be called from @@ -303,7 +311,7 @@ void iwl_leds_background(struct iwl_priv *priv) priv->last_blink_time = 0; return; } - if (is_rf_kill(priv)) { + if (iwl_is_rfkill(priv)) { priv->last_blink_time = 0; return; } @@ -366,8 +374,8 @@ int iwl_leds_register(struct iwl_priv *priv) IWL_LED_TRG_ASSOC, 0, name, trigger); /* for assoc always turn led on */ - priv->led[IWL_LED_TRG_ASSOC].led_on = iwl4965_led_on_reg; - priv->led[IWL_LED_TRG_ASSOC].led_off = iwl4965_led_on_reg; + priv->led[IWL_LED_TRG_ASSOC].led_on = iwl_led_associate; + priv->led[IWL_LED_TRG_ASSOC].led_off = iwl_led_disassociate; priv->led[IWL_LED_TRG_ASSOC].led_pattern = NULL; if (ret) -- cgit v1.2.3 From 4aa41f12aa4f08a10b0b07ed334faa3638ba8e9c Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Fri, 18 Jul 2008 13:53:09 +0800 Subject: iwlwifi: bug fix in AGG flow - cast const to ULL This patch fixes a bug in AGG flow: u64 bitmap = 0; bitmap |= 1 << 32 results to be 0xffffffff80000000. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 6 +++--- drivers/net/wireless/iwlwifi/iwl-5000.c | 6 +++--- drivers/net/wireless/iwlwifi/iwl-tx.c | 2 +- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index c0ba28fa6724..f356f4f0944b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2130,9 +2130,9 @@ static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv, bitmap = bitmap << sh; sh = 0; } - bitmap |= (1 << sh); - IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%x\n", - start, (u32)(bitmap & 0xFFFFFFFF)); + bitmap |= 1ULL << sh; + IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n", + start, (unsigned long long)bitmap); } agg->bitmap = bitmap; diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index f91c54b5ff53..076d3560302b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1228,9 +1228,9 @@ static int iwl5000_tx_status_reply_tx(struct iwl_priv *priv, bitmap = bitmap << sh; sh = 0; } - bitmap |= (1 << sh); - IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%x\n", - start, (u32)(bitmap & 0xFFFFFFFF)); + bitmap |= 1ULL << sh; + IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n", + start, (unsigned long long)bitmap); } agg->bitmap = bitmap; diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 0182e4da8e35..39f19ebee973 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -1391,7 +1391,7 @@ static int iwl_tx_status_reply_compressed_ba(struct iwl_priv *priv, /* For each frame attempted in aggregation, * update driver's record of tx frame's status. */ for (i = 0; i < agg->frame_count ; i++) { - ack = bitmap & (1 << i); + ack = bitmap & (1ULL << i); successes += !!ack; IWL_DEBUG_TX_REPLY("%s ON i=%d idx=%d raw=%d\n", ack? "ACK":"NACK", i, (agg->start_idx + i) & 0xff, -- cgit v1.2.3 From e170402e5459c12ed8f5bfaa11e6550eba09e57a Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Sat, 19 Jul 2008 04:04:18 +0300 Subject: iwlwifi: RS small compile warnings without CONFIG_IWLWIFI_DEBUG iwl-agn-rs.c: In function 'rs_clear': iwl-agn-rs.c:2405: warning: unused variable 'priv Signed-off-by: Denis V. Lunev Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 0e8100e70620..b498b58d81fa 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -2393,6 +2393,7 @@ static void rs_free(void *priv_rate) static void rs_clear(void *priv_rate) { +#ifdef CONFIG_IWLWIFI_DEBUG struct iwl_priv *priv = (struct iwl_priv *) priv_rate; IWL_DEBUG_RATE("enter\n"); @@ -2400,6 +2401,7 @@ static void rs_clear(void *priv_rate) /* TODO - add rate scale state reset */ IWL_DEBUG_RATE("leave\n"); +#endif /* CONFIG_IWLWIFI_DEBUG */ } static void rs_free_sta(void *priv_rate, void *priv_sta) -- cgit v1.2.3 From b5d7be5e665f29274cfe6645b661acb38cb1d19b Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sat, 19 Jul 2008 04:41:24 +0300 Subject: iwlwifi: use dtim_period from association, and set listen_interval This patch uses dtim_period from association, and sets the listen_interval. Signed-off-by: Tomas Winkler Signed-off-by: Emmanuel Grumbach Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-commands.h | 3 +-- drivers/net/wireless/iwlwifi/iwl-core.c | 1 + drivers/net/wireless/iwlwifi/iwl4965-base.c | 5 +++-- 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index cd6d668f4e00..5e57f3ae2ea6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -666,8 +666,7 @@ struct iwl4965_rxon_assoc_cmd { __le16 reserved; } __attribute__ ((packed)); - - +#define IWL_CONN_MAX_LISTEN_INTERVAL 10 /* * REPLY_RXON_TIMING = 0x14 (command, has simple generic response) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 60d443e77c38..96beacf703a6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -827,6 +827,7 @@ int iwl_setup_mac(struct iwl_priv *priv) hw->ampdu_queues = priv->cfg->mod_params->num_of_ampdu_queues; hw->conf.beacon_int = 100; + hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL; if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 9db6aac02185..f71b3f3f81ba 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -639,7 +639,6 @@ static void iwl_activate_qos(struct iwl_priv *priv, u8 force) } #define MAX_UCODE_BEACON_INTERVAL 4096 -#define INTEL_CONN_LISTEN_INTERVAL __constant_cpu_to_le16(0xA) static __le16 iwl4965_adjust_beacon_interval(u16 beacon_val) { @@ -669,7 +668,7 @@ static void iwl4965_setup_rxon_timing(struct iwl_priv *priv) priv->rxon_timing.timestamp.dw[0] = cpu_to_le32(priv->timestamp & 0xFFFFFFFF); - priv->rxon_timing.listen_interval = INTEL_CONN_LISTEN_INTERVAL; + priv->rxon_timing.listen_interval = cpu_to_le16(conf->listen_interval); tsf = priv->timestamp; @@ -2835,6 +2834,7 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co spin_lock_irqsave(&priv->lock, flags); + /* if we are switching from ht to 2.4 clear flags * from any ht related info since 2.4 does not * support ht */ @@ -3164,6 +3164,7 @@ static void iwl4965_bss_info_changed(struct ieee80211_hw *hw, if (bss_conf->assoc) { priv->assoc_id = bss_conf->aid; priv->beacon_int = bss_conf->beacon_int; + priv->power_data.dtim_period = bss_conf->dtim_period; priv->timestamp = bss_conf->timestamp; priv->assoc_capability = bss_conf->assoc_capability; priv->next_scan_jiffies = jiffies + -- cgit v1.2.3 From 80693ceb78b08baa3b66a900d9225b2cf9c6f0ed Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Sat, 19 Jul 2008 23:31:17 +0100 Subject: mac80211: automatic IBSS channel selection When joining an ad-hoc network, the user is currently required to specify the channel. The network will not be joined otherwise, unless it happens to be sitting on the currently active channel. This patch implements automatic channel selection when the user has not locked the interface onto a specific channel. Signed-off-by: Daniel Drake Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 779affd8b8fe..5358420d8796 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3663,11 +3663,21 @@ static int ieee80211_sta_find_ibss(struct net_device *dev, "%s\n", print_mac(mac, bssid), print_mac(mac2, ifsta->bssid)); #endif /* CONFIG_MAC80211_IBSS_DEBUG */ - if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0 && - (bss = ieee80211_rx_bss_get(dev, bssid, - local->hw.conf.channel->center_freq, - ifsta->ssid, ifsta->ssid_len))) { + + if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0) { int ret; + int search_freq; + + if (ifsta->flags & IEEE80211_STA_AUTO_CHANNEL_SEL) + search_freq = bss->freq; + else + search_freq = local->hw.conf.channel->center_freq; + + bss = ieee80211_rx_bss_get(dev, bssid, search_freq, + ifsta->ssid, ifsta->ssid_len); + if (!bss) + goto dont_join; + printk(KERN_DEBUG "%s: Selected IBSS BSSID %s" " based on configured SSID\n", dev->name, print_mac(mac, bssid)); @@ -3675,6 +3685,8 @@ static int ieee80211_sta_find_ibss(struct net_device *dev, ieee80211_rx_bss_put(local, bss); return ret; } + +dont_join: #ifdef CONFIG_MAC80211_IBSS_DEBUG printk(KERN_DEBUG " did not try to join ibss\n"); #endif /* CONFIG_MAC80211_IBSS_DEBUG */ -- cgit v1.2.3 From 25bc2deda9e8a430ed49f507a1120fb2c86abf33 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 21 Jul 2008 02:40:13 +0300 Subject: iwlwifi: rename iwl4965-base.c to iwl-agn.c This patch renames iwl4965-base.c to iwl-agn.c Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/Makefile | 6 +- drivers/net/wireless/iwlwifi/iwl-agn.c | 4523 +++++++++++++++++++++++++++ drivers/net/wireless/iwlwifi/iwl4965-base.c | 4523 --------------------------- 3 files changed, 4525 insertions(+), 4527 deletions(-) create mode 100644 drivers/net/wireless/iwlwifi/iwl-agn.c delete mode 100644 drivers/net/wireless/iwlwifi/iwl4965-base.c diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index f50d2f8fd5c9..6bf3998736b5 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -11,10 +11,8 @@ iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl3945-$(CONFIG_IWL3945_LEDS) += iwl-3945-led.o obj-$(CONFIG_IWL4965) += iwl4965.o -iwl4965-objs := iwl4965-base.o iwl-4965.o iwl-agn-rs.o +iwl4965-objs := iwl-agn.o iwl-4965.o iwl-agn-rs.o -ifeq ($(CONFIG_IWL5000),y) - iwl4965-objs += iwl-5000.o -endif +iwl4965-$(CONFIG_IWL5000) += iwl-5000.o diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c new file mode 100644 index 000000000000..f71b3f3f81ba --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -0,0 +1,4523 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * James P. Ketrenos + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#include "iwl-eeprom.h" +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-io.h" +#include "iwl-helpers.h" +#include "iwl-sta.h" +#include "iwl-calib.h" + + +/****************************************************************************** + * + * module boiler plate + * + ******************************************************************************/ + +/* + * module name, copyright, version, etc. + * NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk + */ + +#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux" + +#ifdef CONFIG_IWLWIFI_DEBUG +#define VD "d" +#else +#define VD +#endif + +#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT +#define VS "s" +#else +#define VS +#endif + +#define DRV_VERSION IWLWIFI_VERSION VD VS + + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR(DRV_COPYRIGHT); +MODULE_LICENSE("GPL"); + +/*************** STATION TABLE MANAGEMENT **** + * mac80211 should be examined to determine if sta_info is duplicating + * the functionality provided here + */ + +/**************************************************************/ + + + +static void iwl4965_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt) +{ + struct iwl_rxon_cmd *rxon = &priv->staging_rxon; + + if (hw_decrypt) + rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK; + else + rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK; + +} + +/** + * iwl4965_check_rxon_cmd - validate RXON structure is valid + * + * NOTE: This is really only useful during development and can eventually + * be #ifdef'd out once the driver is stable and folks aren't actively + * making changes + */ +static int iwl4965_check_rxon_cmd(struct iwl_rxon_cmd *rxon) +{ + int error = 0; + int counter = 1; + + if (rxon->flags & RXON_FLG_BAND_24G_MSK) { + error |= le32_to_cpu(rxon->flags & + (RXON_FLG_TGJ_NARROW_BAND_MSK | + RXON_FLG_RADAR_DETECT_MSK)); + if (error) + IWL_WARNING("check 24G fields %d | %d\n", + counter++, error); + } else { + error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ? + 0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK); + if (error) + IWL_WARNING("check 52 fields %d | %d\n", + counter++, error); + error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK); + if (error) + IWL_WARNING("check 52 CCK %d | %d\n", + counter++, error); + } + error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1; + if (error) + IWL_WARNING("check mac addr %d | %d\n", counter++, error); + + /* make sure basic rates 6Mbps and 1Mbps are supported */ + error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) && + ((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0)); + if (error) + IWL_WARNING("check basic rate %d | %d\n", counter++, error); + + error |= (le16_to_cpu(rxon->assoc_id) > 2007); + if (error) + IWL_WARNING("check assoc id %d | %d\n", counter++, error); + + error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) + == (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)); + if (error) + IWL_WARNING("check CCK and short slot %d | %d\n", + counter++, error); + + error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) + == (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)); + if (error) + IWL_WARNING("check CCK & auto detect %d | %d\n", + counter++, error); + + error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK | + RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK); + if (error) + IWL_WARNING("check TGG and auto detect %d | %d\n", + counter++, error); + + if (error) + IWL_WARNING("Tuning to channel %d\n", + le16_to_cpu(rxon->channel)); + + if (error) { + IWL_ERROR("Not a valid iwl4965_rxon_assoc_cmd field values\n"); + return -1; + } + return 0; +} + +/** + * iwl4965_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed + * @priv: staging_rxon is compared to active_rxon + * + * If the RXON structure is changing enough to require a new tune, + * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that + * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. + */ +static int iwl4965_full_rxon_required(struct iwl_priv *priv) +{ + + /* These items are only settable from the full RXON command */ + if (!(iwl_is_associated(priv)) || + compare_ether_addr(priv->staging_rxon.bssid_addr, + priv->active_rxon.bssid_addr) || + compare_ether_addr(priv->staging_rxon.node_addr, + priv->active_rxon.node_addr) || + compare_ether_addr(priv->staging_rxon.wlap_bssid_addr, + priv->active_rxon.wlap_bssid_addr) || + (priv->staging_rxon.dev_type != priv->active_rxon.dev_type) || + (priv->staging_rxon.channel != priv->active_rxon.channel) || + (priv->staging_rxon.air_propagation != + priv->active_rxon.air_propagation) || + (priv->staging_rxon.ofdm_ht_single_stream_basic_rates != + priv->active_rxon.ofdm_ht_single_stream_basic_rates) || + (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates != + priv->active_rxon.ofdm_ht_dual_stream_basic_rates) || + (priv->staging_rxon.rx_chain != priv->active_rxon.rx_chain) || + (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id)) + return 1; + + /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can + * be updated with the RXON_ASSOC command -- however only some + * flag transitions are allowed using RXON_ASSOC */ + + /* Check if we are not switching bands */ + if ((priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) != + (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)) + return 1; + + /* Check if we are switching association toggle */ + if ((priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) != + (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK)) + return 1; + + return 0; +} + +/** + * iwl4965_commit_rxon - commit staging_rxon to hardware + * + * The RXON command in staging_rxon is committed to the hardware and + * the active_rxon structure is updated with the new data. This + * function correctly transitions out of the RXON_ASSOC_MSK state if + * a HW tune is required based on the RXON structure changes. + */ +static int iwl4965_commit_rxon(struct iwl_priv *priv) +{ + /* cast away the const for active_rxon in this function */ + struct iwl_rxon_cmd *active_rxon = (void *)&priv->active_rxon; + DECLARE_MAC_BUF(mac); + int ret; + bool new_assoc = + !!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK); + + if (!iwl_is_alive(priv)) + return -EBUSY; + + /* always get timestamp with Rx frame */ + priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK; + /* allow CTS-to-self if possible. this is relevant only for + * 5000, but will not damage 4965 */ + priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN; + + ret = iwl4965_check_rxon_cmd(&priv->staging_rxon); + if (ret) { + IWL_ERROR("Invalid RXON configuration. Not committing.\n"); + return -EINVAL; + } + + /* If we don't need to send a full RXON, we can use + * iwl4965_rxon_assoc_cmd which is used to reconfigure filter + * and other flags for the current radio configuration. */ + if (!iwl4965_full_rxon_required(priv)) { + ret = iwl_send_rxon_assoc(priv); + if (ret) { + IWL_ERROR("Error setting RXON_ASSOC (%d)\n", ret); + return ret; + } + + memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); + return 0; + } + + /* station table will be cleared */ + priv->assoc_station_added = 0; + + /* If we are currently associated and the new config requires + * an RXON_ASSOC and the new config wants the associated mask enabled, + * we must clear the associated from the active configuration + * before we apply the new config */ + if (iwl_is_associated(priv) && new_assoc) { + IWL_DEBUG_INFO("Toggling associated bit on current RXON\n"); + active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; + + ret = iwl_send_cmd_pdu(priv, REPLY_RXON, + sizeof(struct iwl_rxon_cmd), + &priv->active_rxon); + + /* If the mask clearing failed then we set + * active_rxon back to what it was previously */ + if (ret) { + active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; + IWL_ERROR("Error clearing ASSOC_MSK (%d)\n", ret); + return ret; + } + } + + IWL_DEBUG_INFO("Sending RXON\n" + "* with%s RXON_FILTER_ASSOC_MSK\n" + "* channel = %d\n" + "* bssid = %s\n", + (new_assoc ? "" : "out"), + le16_to_cpu(priv->staging_rxon.channel), + print_mac(mac, priv->staging_rxon.bssid_addr)); + + iwl4965_set_rxon_hwcrypto(priv, !priv->hw_params.sw_crypto); + + /* Apply the new configuration + * RXON unassoc clears the station table in uCode, send it before + * we add the bcast station. If assoc bit is set, we will send RXON + * after having added the bcast and bssid station. + */ + if (!new_assoc) { + ret = iwl_send_cmd_pdu(priv, REPLY_RXON, + sizeof(struct iwl_rxon_cmd), &priv->staging_rxon); + if (ret) { + IWL_ERROR("Error setting new RXON (%d)\n", ret); + return ret; + } + memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); + } + + iwl_clear_stations_table(priv); + + if (!priv->error_recovering) + priv->start_calib = 0; + + /* Add the broadcast address so we can send broadcast frames */ + if (iwl_rxon_add_station(priv, iwl_bcast_addr, 0) == + IWL_INVALID_STATION) { + IWL_ERROR("Error adding BROADCAST address for transmit.\n"); + return -EIO; + } + + /* If we have set the ASSOC_MSK and we are in BSS mode then + * add the IWL_AP_ID to the station rate table */ + if (new_assoc) { + if (priv->iw_mode == IEEE80211_IF_TYPE_STA) { + ret = iwl_rxon_add_station(priv, + priv->active_rxon.bssid_addr, 1); + if (ret == IWL_INVALID_STATION) { + IWL_ERROR("Error adding AP address for TX.\n"); + return -EIO; + } + priv->assoc_station_added = 1; + if (priv->default_wep_key && + iwl_send_static_wepkey_cmd(priv, 0)) + IWL_ERROR("Could not send WEP static key.\n"); + } + + /* Apply the new configuration + * RXON assoc doesn't clear the station table in uCode, + */ + ret = iwl_send_cmd_pdu(priv, REPLY_RXON, + sizeof(struct iwl_rxon_cmd), &priv->staging_rxon); + if (ret) { + IWL_ERROR("Error setting new RXON (%d)\n", ret); + return ret; + } + memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); + } + + iwl_init_sensitivity(priv); + + /* If we issue a new RXON command which required a tune then we must + * send a new TXPOWER command or we won't be able to Tx any frames */ + ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true); + if (ret) { + IWL_ERROR("Error sending TX power (%d)\n", ret); + return ret; + } + + return 0; +} + +void iwl4965_update_chain_flags(struct iwl_priv *priv) +{ + + iwl_set_rxon_chain(priv); + iwl4965_commit_rxon(priv); +} + +static int iwl4965_send_bt_config(struct iwl_priv *priv) +{ + struct iwl4965_bt_cmd bt_cmd = { + .flags = 3, + .lead_time = 0xAA, + .max_kill = 1, + .kill_ack_mask = 0, + .kill_cts_mask = 0, + }; + + return iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, + sizeof(struct iwl4965_bt_cmd), &bt_cmd); +} + +static void iwl_clear_free_frames(struct iwl_priv *priv) +{ + struct list_head *element; + + IWL_DEBUG_INFO("%d frames on pre-allocated heap on clear.\n", + priv->frames_count); + + while (!list_empty(&priv->free_frames)) { + element = priv->free_frames.next; + list_del(element); + kfree(list_entry(element, struct iwl_frame, list)); + priv->frames_count--; + } + + if (priv->frames_count) { + IWL_WARNING("%d frames still in use. Did we lose one?\n", + priv->frames_count); + priv->frames_count = 0; + } +} + +static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv) +{ + struct iwl_frame *frame; + struct list_head *element; + if (list_empty(&priv->free_frames)) { + frame = kzalloc(sizeof(*frame), GFP_KERNEL); + if (!frame) { + IWL_ERROR("Could not allocate frame!\n"); + return NULL; + } + + priv->frames_count++; + return frame; + } + + element = priv->free_frames.next; + list_del(element); + return list_entry(element, struct iwl_frame, list); +} + +static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame) +{ + memset(frame, 0, sizeof(*frame)); + list_add(&frame->list, &priv->free_frames); +} + +static unsigned int iwl_fill_beacon_frame(struct iwl_priv *priv, + struct ieee80211_hdr *hdr, + const u8 *dest, int left) +{ + if (!iwl_is_associated(priv) || !priv->ibss_beacon || + ((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) && + (priv->iw_mode != IEEE80211_IF_TYPE_AP))) + return 0; + + if (priv->ibss_beacon->len > left) + return 0; + + memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len); + + return priv->ibss_beacon->len; +} + +static u8 iwl4965_rate_get_lowest_plcp(struct iwl_priv *priv) +{ + int i; + int rate_mask; + + /* Set rate mask*/ + if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) + rate_mask = priv->active_rate_basic & 0xF; + else + rate_mask = priv->active_rate_basic & 0xFF0; + + /* Find lowest valid rate */ + for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID; + i = iwl_rates[i].next_ieee) { + if (rate_mask & (1 << i)) + return iwl_rates[i].plcp; + } + + /* No valid rate was found. Assign the lowest one */ + if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) + return IWL_RATE_1M_PLCP; + else + return IWL_RATE_6M_PLCP; +} + +unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, + struct iwl_frame *frame, u8 rate) +{ + struct iwl_tx_beacon_cmd *tx_beacon_cmd; + unsigned int frame_size; + + tx_beacon_cmd = &frame->u.beacon; + memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); + + tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id; + tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + + frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame, + iwl_bcast_addr, + sizeof(frame->u) - sizeof(*tx_beacon_cmd)); + + BUG_ON(frame_size > MAX_MPDU_SIZE); + tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); + + if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP)) + tx_beacon_cmd->tx.rate_n_flags = + iwl_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK); + else + tx_beacon_cmd->tx.rate_n_flags = + iwl_hw_set_rate_n_flags(rate, 0); + + tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK | + TX_CMD_FLG_TSF_MSK | + TX_CMD_FLG_STA_RATE_MSK; + + return sizeof(*tx_beacon_cmd) + frame_size; +} +static int iwl4965_send_beacon_cmd(struct iwl_priv *priv) +{ + struct iwl_frame *frame; + unsigned int frame_size; + int rc; + u8 rate; + + frame = iwl_get_free_frame(priv); + + if (!frame) { + IWL_ERROR("Could not obtain free frame buffer for beacon " + "command.\n"); + return -ENOMEM; + } + + rate = iwl4965_rate_get_lowest_plcp(priv); + + frame_size = iwl4965_hw_get_beacon_cmd(priv, frame, rate); + + rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size, + &frame->u.cmd[0]); + + iwl_free_frame(priv, frame); + + return rc; +} + +/****************************************************************************** + * + * Misc. internal state and helper functions + * + ******************************************************************************/ + +static void iwl4965_ht_conf(struct iwl_priv *priv, + struct ieee80211_bss_conf *bss_conf) +{ + struct ieee80211_ht_info *ht_conf = bss_conf->ht_conf; + struct ieee80211_ht_bss_info *ht_bss_conf = bss_conf->ht_bss_conf; + struct iwl_ht_info *iwl_conf = &priv->current_ht_config; + + IWL_DEBUG_MAC80211("enter: \n"); + + iwl_conf->is_ht = bss_conf->assoc_ht; + + if (!iwl_conf->is_ht) + return; + + priv->ps_mode = (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); + + if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20) + iwl_conf->sgf |= HT_SHORT_GI_20MHZ; + if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40) + iwl_conf->sgf |= HT_SHORT_GI_40MHZ; + + iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD); + iwl_conf->max_amsdu_size = + !!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU); + + iwl_conf->supported_chan_width = + !!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH); + iwl_conf->extension_chan_offset = + ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_SEC_OFFSET; + /* If no above or below channel supplied disable FAT channel */ + if (iwl_conf->extension_chan_offset != IEEE80211_HT_IE_CHA_SEC_ABOVE && + iwl_conf->extension_chan_offset != IEEE80211_HT_IE_CHA_SEC_BELOW) { + iwl_conf->extension_chan_offset = IEEE80211_HT_IE_CHA_SEC_NONE; + iwl_conf->supported_chan_width = 0; + } + + iwl_conf->tx_mimo_ps_mode = + (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); + memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16); + + iwl_conf->control_channel = ht_bss_conf->primary_channel; + iwl_conf->tx_chan_width = + !!(ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_WIDTH); + iwl_conf->ht_protection = + ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_HT_PROTECTION; + iwl_conf->non_GF_STA_present = + !!(ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_NON_GF_STA_PRSNT); + + IWL_DEBUG_MAC80211("control channel %d\n", iwl_conf->control_channel); + IWL_DEBUG_MAC80211("leave\n"); +} + +/* + * QoS support +*/ +static void iwl_activate_qos(struct iwl_priv *priv, u8 force) +{ + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (!priv->qos_data.qos_enable) + return; + + priv->qos_data.def_qos_parm.qos_flags = 0; + + if (priv->qos_data.qos_cap.q_AP.queue_request && + !priv->qos_data.qos_cap.q_AP.txop_request) + priv->qos_data.def_qos_parm.qos_flags |= + QOS_PARAM_FLG_TXOP_TYPE_MSK; + if (priv->qos_data.qos_active) + priv->qos_data.def_qos_parm.qos_flags |= + QOS_PARAM_FLG_UPDATE_EDCA_MSK; + + if (priv->current_ht_config.is_ht) + priv->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK; + + if (force || iwl_is_associated(priv)) { + IWL_DEBUG_QOS("send QoS cmd with Qos active=%d FLAGS=0x%X\n", + priv->qos_data.qos_active, + priv->qos_data.def_qos_parm.qos_flags); + + iwl_send_cmd_pdu_async(priv, REPLY_QOS_PARAM, + sizeof(struct iwl_qosparam_cmd), + &priv->qos_data.def_qos_parm, NULL); + } +} + +#define MAX_UCODE_BEACON_INTERVAL 4096 + +static __le16 iwl4965_adjust_beacon_interval(u16 beacon_val) +{ + u16 new_val = 0; + u16 beacon_factor = 0; + + beacon_factor = + (beacon_val + MAX_UCODE_BEACON_INTERVAL) + / MAX_UCODE_BEACON_INTERVAL; + new_val = beacon_val / beacon_factor; + + return cpu_to_le16(new_val); +} + +static void iwl4965_setup_rxon_timing(struct iwl_priv *priv) +{ + u64 interval_tm_unit; + u64 tsf, result; + unsigned long flags; + struct ieee80211_conf *conf = NULL; + u16 beacon_int = 0; + + conf = ieee80211_get_hw_conf(priv->hw); + + spin_lock_irqsave(&priv->lock, flags); + priv->rxon_timing.timestamp.dw[1] = cpu_to_le32(priv->timestamp >> 32); + priv->rxon_timing.timestamp.dw[0] = + cpu_to_le32(priv->timestamp & 0xFFFFFFFF); + + priv->rxon_timing.listen_interval = cpu_to_le16(conf->listen_interval); + + tsf = priv->timestamp; + + beacon_int = priv->beacon_int; + spin_unlock_irqrestore(&priv->lock, flags); + + if (priv->iw_mode == IEEE80211_IF_TYPE_STA) { + if (beacon_int == 0) { + priv->rxon_timing.beacon_interval = cpu_to_le16(100); + priv->rxon_timing.beacon_init_val = cpu_to_le32(102400); + } else { + priv->rxon_timing.beacon_interval = + cpu_to_le16(beacon_int); + priv->rxon_timing.beacon_interval = + iwl4965_adjust_beacon_interval( + le16_to_cpu(priv->rxon_timing.beacon_interval)); + } + + priv->rxon_timing.atim_window = 0; + } else { + priv->rxon_timing.beacon_interval = + iwl4965_adjust_beacon_interval(conf->beacon_int); + /* TODO: we need to get atim_window from upper stack + * for now we set to 0 */ + priv->rxon_timing.atim_window = 0; + } + + interval_tm_unit = + (le16_to_cpu(priv->rxon_timing.beacon_interval) * 1024); + result = do_div(tsf, interval_tm_unit); + priv->rxon_timing.beacon_init_val = + cpu_to_le32((u32) ((u64) interval_tm_unit - result)); + + IWL_DEBUG_ASSOC + ("beacon interval %d beacon timer %d beacon tim %d\n", + le16_to_cpu(priv->rxon_timing.beacon_interval), + le32_to_cpu(priv->rxon_timing.beacon_init_val), + le16_to_cpu(priv->rxon_timing.atim_window)); +} + +static void iwl_set_flags_for_band(struct iwl_priv *priv, + enum ieee80211_band band) +{ + if (band == IEEE80211_BAND_5GHZ) { + priv->staging_rxon.flags &= + ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK + | RXON_FLG_CCK_MSK); + priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; + } else { + /* Copied from iwl4965_post_associate() */ + if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME) + priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; + else + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; + + if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; + + priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK; + priv->staging_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK; + priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK; + } +} + +/* + * initialize rxon structure with default values from eeprom + */ +static void iwl4965_connection_init_rx_config(struct iwl_priv *priv) +{ + const struct iwl_channel_info *ch_info; + + memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon)); + + switch (priv->iw_mode) { + case IEEE80211_IF_TYPE_AP: + priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP; + break; + + case IEEE80211_IF_TYPE_STA: + priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS; + priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; + break; + + case IEEE80211_IF_TYPE_IBSS: + priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS; + priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK; + priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK | + RXON_FILTER_ACCEPT_GRP_MSK; + break; + + case IEEE80211_IF_TYPE_MNTR: + priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER; + priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK | + RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK; + break; + default: + IWL_ERROR("Unsupported interface type %d\n", priv->iw_mode); + break; + } + +#if 0 + /* TODO: Figure out when short_preamble would be set and cache from + * that */ + if (!hw_to_local(priv->hw)->short_preamble) + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; + else + priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; +#endif + + ch_info = iwl_get_channel_info(priv, priv->band, + le16_to_cpu(priv->active_rxon.channel)); + + if (!ch_info) + ch_info = &priv->channel_info[0]; + + /* + * in some case A channels are all non IBSS + * in this case force B/G channel + */ + if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && + !(is_channel_ibss(ch_info))) + ch_info = &priv->channel_info[0]; + + priv->staging_rxon.channel = cpu_to_le16(ch_info->channel); + priv->band = ch_info->band; + + iwl_set_flags_for_band(priv, priv->band); + + priv->staging_rxon.ofdm_basic_rates = + (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; + priv->staging_rxon.cck_basic_rates = + (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; + + priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK | + RXON_FLG_CHANNEL_MODE_PURE_40_MSK); + memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); + memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN); + priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff; + priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff; + iwl_set_rxon_chain(priv); +} + +static int iwl4965_set_mode(struct iwl_priv *priv, int mode) +{ + priv->iw_mode = mode; + + iwl4965_connection_init_rx_config(priv); + memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); + + iwl_clear_stations_table(priv); + + /* dont commit rxon if rf-kill is on*/ + if (!iwl_is_ready_rf(priv)) + return -EAGAIN; + + cancel_delayed_work(&priv->scan_check); + if (iwl_scan_cancel_timeout(priv, 100)) { + IWL_WARNING("Aborted scan still in progress after 100ms\n"); + IWL_DEBUG_MAC80211("leaving - scan abort failed.\n"); + return -EAGAIN; + } + + iwl4965_commit_rxon(priv); + + return 0; +} + +static void iwl4965_set_rate(struct iwl_priv *priv) +{ + const struct ieee80211_supported_band *hw = NULL; + struct ieee80211_rate *rate; + int i; + + hw = iwl_get_hw_mode(priv, priv->band); + if (!hw) { + IWL_ERROR("Failed to set rate: unable to get hw mode\n"); + return; + } + + priv->active_rate = 0; + priv->active_rate_basic = 0; + + for (i = 0; i < hw->n_bitrates; i++) { + rate = &(hw->bitrates[i]); + if (rate->hw_value < IWL_RATE_COUNT) + priv->active_rate |= (1 << rate->hw_value); + } + + IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n", + priv->active_rate, priv->active_rate_basic); + + /* + * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK) + * otherwise set it to the default of all CCK rates and 6, 12, 24 for + * OFDM + */ + if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK) + priv->staging_rxon.cck_basic_rates = + ((priv->active_rate_basic & + IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF; + else + priv->staging_rxon.cck_basic_rates = + (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; + + if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK) + priv->staging_rxon.ofdm_basic_rates = + ((priv->active_rate_basic & + (IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >> + IWL_FIRST_OFDM_RATE) & 0xFF; + else + priv->staging_rxon.ofdm_basic_rates = + (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; +} + +#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT + +#include "iwl-spectrum.h" + +#define BEACON_TIME_MASK_LOW 0x00FFFFFF +#define BEACON_TIME_MASK_HIGH 0xFF000000 +#define TIME_UNIT 1024 + +/* + * extended beacon time format + * time in usec will be changed into a 32-bit value in 8:24 format + * the high 1 byte is the beacon counts + * the lower 3 bytes is the time in usec within one beacon interval + */ + +static u32 iwl4965_usecs_to_beacons(u32 usec, u32 beacon_interval) +{ + u32 quot; + u32 rem; + u32 interval = beacon_interval * 1024; + + if (!interval || !usec) + return 0; + + quot = (usec / interval) & (BEACON_TIME_MASK_HIGH >> 24); + rem = (usec % interval) & BEACON_TIME_MASK_LOW; + + return (quot << 24) + rem; +} + +/* base is usually what we get from ucode with each received frame, + * the same as HW timer counter counting down + */ + +static __le32 iwl4965_add_beacon_time(u32 base, u32 addon, u32 beacon_interval) +{ + u32 base_low = base & BEACON_TIME_MASK_LOW; + u32 addon_low = addon & BEACON_TIME_MASK_LOW; + u32 interval = beacon_interval * TIME_UNIT; + u32 res = (base & BEACON_TIME_MASK_HIGH) + + (addon & BEACON_TIME_MASK_HIGH); + + if (base_low > addon_low) + res += base_low - addon_low; + else if (base_low < addon_low) { + res += interval + base_low - addon_low; + res += (1 << 24); + } else + res += (1 << 24); + + return cpu_to_le32(res); +} + +static int iwl4965_get_measurement(struct iwl_priv *priv, + struct ieee80211_measurement_params *params, + u8 type) +{ + struct iwl4965_spectrum_cmd spectrum; + struct iwl_rx_packet *res; + struct iwl_host_cmd cmd = { + .id = REPLY_SPECTRUM_MEASUREMENT_CMD, + .data = (void *)&spectrum, + .meta.flags = CMD_WANT_SKB, + }; + u32 add_time = le64_to_cpu(params->start_time); + int rc; + int spectrum_resp_status; + int duration = le16_to_cpu(params->duration); + + if (iwl_is_associated(priv)) + add_time = + iwl4965_usecs_to_beacons( + le64_to_cpu(params->start_time) - priv->last_tsf, + le16_to_cpu(priv->rxon_timing.beacon_interval)); + + memset(&spectrum, 0, sizeof(spectrum)); + + spectrum.channel_count = cpu_to_le16(1); + spectrum.flags = + RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK; + spectrum.filter_flags = MEASUREMENT_FILTER_FLAG; + cmd.len = sizeof(spectrum); + spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len)); + + if (iwl_is_associated(priv)) + spectrum.start_time = + iwl4965_add_beacon_time(priv->last_beacon_time, + add_time, + le16_to_cpu(priv->rxon_timing.beacon_interval)); + else + spectrum.start_time = 0; + + spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT); + spectrum.channels[0].channel = params->channel; + spectrum.channels[0].type = type; + if (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK) + spectrum.flags |= RXON_FLG_BAND_24G_MSK | + RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK; + + rc = iwl_send_cmd_sync(priv, &cmd); + if (rc) + return rc; + + res = (struct iwl_rx_packet *)cmd.meta.u.skb->data; + if (res->hdr.flags & IWL_CMD_FAILED_MSK) { + IWL_ERROR("Bad return from REPLY_RX_ON_ASSOC command\n"); + rc = -EIO; + } + + spectrum_resp_status = le16_to_cpu(res->u.spectrum.status); + switch (spectrum_resp_status) { + case 0: /* Command will be handled */ + if (res->u.spectrum.id != 0xff) { + IWL_DEBUG_INFO + ("Replaced existing measurement: %d\n", + res->u.spectrum.id); + priv->measurement_status &= ~MEASUREMENT_READY; + } + priv->measurement_status |= MEASUREMENT_ACTIVE; + rc = 0; + break; + + case 1: /* Command will not be handled */ + rc = -EAGAIN; + break; + } + + dev_kfree_skb_any(cmd.meta.u.skb); + + return rc; +} +#endif + +/****************************************************************************** + * + * Generic RX handler implementations + * + ******************************************************************************/ +static void iwl_rx_reply_alive(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl_alive_resp *palive; + struct delayed_work *pwork; + + palive = &pkt->u.alive_frame; + + IWL_DEBUG_INFO("Alive ucode status 0x%08X revision " + "0x%01X 0x%01X\n", + palive->is_valid, palive->ver_type, + palive->ver_subtype); + + if (palive->ver_subtype == INITIALIZE_SUBTYPE) { + IWL_DEBUG_INFO("Initialization Alive received.\n"); + memcpy(&priv->card_alive_init, + &pkt->u.alive_frame, + sizeof(struct iwl_init_alive_resp)); + pwork = &priv->init_alive_start; + } else { + IWL_DEBUG_INFO("Runtime Alive received.\n"); + memcpy(&priv->card_alive, &pkt->u.alive_frame, + sizeof(struct iwl_alive_resp)); + pwork = &priv->alive_start; + } + + /* We delay the ALIVE response by 5ms to + * give the HW RF Kill time to activate... */ + if (palive->is_valid == UCODE_VALID_OK) + queue_delayed_work(priv->workqueue, pwork, + msecs_to_jiffies(5)); + else + IWL_WARNING("uCode did not respond OK.\n"); +} + +static void iwl4965_rx_reply_error(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + + IWL_ERROR("Error Reply type 0x%08X cmd %s (0x%02X) " + "seq 0x%04X ser 0x%08X\n", + le32_to_cpu(pkt->u.err_resp.error_type), + get_cmd_string(pkt->u.err_resp.cmd_id), + pkt->u.err_resp.cmd_id, + le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num), + le32_to_cpu(pkt->u.err_resp.error_info)); +} + +#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x + +static void iwl4965_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl_rxon_cmd *rxon = (void *)&priv->active_rxon; + struct iwl4965_csa_notification *csa = &(pkt->u.csa_notif); + IWL_DEBUG_11H("CSA notif: channel %d, status %d\n", + le16_to_cpu(csa->channel), le32_to_cpu(csa->status)); + rxon->channel = csa->channel; + priv->staging_rxon.channel = csa->channel; +} + +static void iwl4965_rx_spectrum_measure_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ +#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl4965_spectrum_notification *report = &(pkt->u.spectrum_notif); + + if (!report->state) { + IWL_DEBUG(IWL_DL_11H, + "Spectrum Measure Notification: Start\n"); + return; + } + + memcpy(&priv->measure_report, report, sizeof(*report)); + priv->measurement_status |= MEASUREMENT_READY; +#endif +} + +static void iwl4965_rx_pm_sleep_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ +#ifdef CONFIG_IWLWIFI_DEBUG + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl4965_sleep_notification *sleep = &(pkt->u.sleep_notif); + IWL_DEBUG_RX("sleep mode: %d, src: %d\n", + sleep->pm_sleep_mode, sleep->pm_wakeup_src); +#endif +} + +static void iwl4965_rx_pm_debug_statistics_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + IWL_DEBUG_RADIO("Dumping %d bytes of unhandled " + "notification for %s:\n", + le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd)); + iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len)); +} + +static void iwl4965_bg_beacon_update(struct work_struct *work) +{ + struct iwl_priv *priv = + container_of(work, struct iwl_priv, beacon_update); + struct sk_buff *beacon; + + /* Pull updated AP beacon from mac80211. will fail if not in AP mode */ + beacon = ieee80211_beacon_get(priv->hw, priv->vif); + + if (!beacon) { + IWL_ERROR("update beacon failed\n"); + return; + } + + mutex_lock(&priv->mutex); + /* new beacon skb is allocated every time; dispose previous.*/ + if (priv->ibss_beacon) + dev_kfree_skb(priv->ibss_beacon); + + priv->ibss_beacon = beacon; + mutex_unlock(&priv->mutex); + + iwl4965_send_beacon_cmd(priv); +} + +/** + * iwl4965_bg_statistics_periodic - Timer callback to queue statistics + * + * This callback is provided in order to send a statistics request. + * + * This timer function is continually reset to execute within + * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION + * was received. We need to ensure we receive the statistics in order + * to update the temperature used for calibrating the TXPOWER. + */ +static void iwl4965_bg_statistics_periodic(unsigned long data) +{ + struct iwl_priv *priv = (struct iwl_priv *)data; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + iwl_send_statistics_request(priv, CMD_ASYNC); +} + +static void iwl4965_rx_beacon_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ +#ifdef CONFIG_IWLWIFI_DEBUG + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl4965_beacon_notif *beacon = &(pkt->u.beacon_status); + u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); + + IWL_DEBUG_RX("beacon status %x retries %d iss %d " + "tsf %d %d rate %d\n", + le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK, + beacon->beacon_notify_hdr.failure_frame, + le32_to_cpu(beacon->ibss_mgr_status), + le32_to_cpu(beacon->high_tsf), + le32_to_cpu(beacon->low_tsf), rate); +#endif + + if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) && + (!test_bit(STATUS_EXIT_PENDING, &priv->status))) + queue_work(priv->workqueue, &priv->beacon_update); +} + +/* Handle notification from uCode that card's power state is changing + * due to software, hardware, or critical temperature RFKILL */ +static void iwl4965_rx_card_state_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); + unsigned long status = priv->status; + + IWL_DEBUG_RF_KILL("Card state received: HW:%s SW:%s\n", + (flags & HW_CARD_DISABLED) ? "Kill" : "On", + (flags & SW_CARD_DISABLED) ? "Kill" : "On"); + + if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | + RF_CARD_DISABLED)) { + + iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, + CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + + if (!iwl_grab_nic_access(priv)) { + iwl_write_direct32( + priv, HBUS_TARG_MBX_C, + HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); + + iwl_release_nic_access(priv); + } + + if (!(flags & RXON_CARD_DISABLED)) { + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + if (!iwl_grab_nic_access(priv)) { + iwl_write_direct32( + priv, HBUS_TARG_MBX_C, + HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); + + iwl_release_nic_access(priv); + } + } + + if (flags & RF_CARD_DISABLED) { + iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, + CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); + iwl_read32(priv, CSR_UCODE_DRV_GP1); + if (!iwl_grab_nic_access(priv)) + iwl_release_nic_access(priv); + } + } + + if (flags & HW_CARD_DISABLED) + set_bit(STATUS_RF_KILL_HW, &priv->status); + else + clear_bit(STATUS_RF_KILL_HW, &priv->status); + + + if (flags & SW_CARD_DISABLED) + set_bit(STATUS_RF_KILL_SW, &priv->status); + else + clear_bit(STATUS_RF_KILL_SW, &priv->status); + + if (!(flags & RXON_CARD_DISABLED)) + iwl_scan_cancel(priv); + + if ((test_bit(STATUS_RF_KILL_HW, &status) != + test_bit(STATUS_RF_KILL_HW, &priv->status)) || + (test_bit(STATUS_RF_KILL_SW, &status) != + test_bit(STATUS_RF_KILL_SW, &priv->status))) + queue_work(priv->workqueue, &priv->rf_kill); + else + wake_up_interruptible(&priv->wait_command_queue); +} + +int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + ret = iwl_grab_nic_access(priv); + if (ret) + goto err; + + if (src == IWL_PWR_SRC_VAUX) { + u32 val; + ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE, + &val); + + if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) + iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VAUX, + ~APMG_PS_CTRL_MSK_PWR_SRC); + } else { + iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, + ~APMG_PS_CTRL_MSK_PWR_SRC); + } + + iwl_release_nic_access(priv); +err: + spin_unlock_irqrestore(&priv->lock, flags); + return ret; +} + +/** + * iwl4965_setup_rx_handlers - Initialize Rx handler callbacks + * + * Setup the RX handlers for each of the reply types sent from the uCode + * to the host. + * + * This function chains into the hardware specific files for them to setup + * any hardware specific handlers as well. + */ +static void iwl_setup_rx_handlers(struct iwl_priv *priv) +{ + priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive; + priv->rx_handlers[REPLY_ERROR] = iwl4965_rx_reply_error; + priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl4965_rx_csa; + priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] = + iwl4965_rx_spectrum_measure_notif; + priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl4965_rx_pm_sleep_notif; + priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] = + iwl4965_rx_pm_debug_statistics_notif; + priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif; + + /* + * The same handler is used for both the REPLY to a discrete + * statistics request from the host as well as for the periodic + * statistics notifications (after received beacons) from the uCode. + */ + priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_rx_statistics; + priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics; + + iwl_setup_rx_scan_handlers(priv); + + /* status change handler */ + priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl4965_rx_card_state_notif; + + priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] = + iwl_rx_missed_beacon_notif; + /* Rx handlers */ + priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl_rx_reply_rx_phy; + priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl_rx_reply_rx; + /* block ack */ + priv->rx_handlers[REPLY_COMPRESSED_BA] = iwl_rx_reply_compressed_ba; + /* Set up hardware specific Rx handlers */ + priv->cfg->ops->lib->rx_handler_setup(priv); +} + +/* + * this should be called while priv->lock is locked +*/ +static void __iwl_rx_replenish(struct iwl_priv *priv) +{ + iwl_rx_allocate(priv); + iwl_rx_queue_restock(priv); +} + + +/** + * iwl_rx_handle - Main entry function for receiving responses from uCode + * + * Uses the priv->rx_handlers callback function array to invoke + * the appropriate handlers, including command responses, + * frame-received notifications, and other notifications. + */ +void iwl_rx_handle(struct iwl_priv *priv) +{ + struct iwl_rx_mem_buffer *rxb; + struct iwl_rx_packet *pkt; + struct iwl_rx_queue *rxq = &priv->rxq; + u32 r, i; + int reclaim; + unsigned long flags; + u8 fill_rx = 0; + u32 count = 8; + + /* uCode's read index (stored in shared DRAM) indicates the last Rx + * buffer that the driver may process (last buffer filled by ucode). */ + r = priv->cfg->ops->lib->shared_mem_rx_idx(priv); + i = rxq->read; + + /* Rx interrupt, but nothing sent from uCode */ + if (i == r) + IWL_DEBUG(IWL_DL_RX, "r = %d, i = %d\n", r, i); + + if (iwl_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2)) + fill_rx = 1; + + while (i != r) { + rxb = rxq->queue[i]; + + /* If an RXB doesn't have a Rx queue slot associated with it, + * then a bug has been introduced in the queue refilling + * routines -- catch it here */ + BUG_ON(rxb == NULL); + + rxq->queue[i] = NULL; + + pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); + pkt = (struct iwl_rx_packet *)rxb->skb->data; + + /* Reclaim a command buffer only if this packet is a response + * to a (driver-originated) command. + * If the packet (e.g. Rx frame) originated from uCode, + * there is no command buffer to reclaim. + * Ucode should set SEQ_RX_FRAME bit if ucode-originated, + * but apparently a few don't get set; catch them here. */ + reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) && + (pkt->hdr.cmd != REPLY_RX_PHY_CMD) && + (pkt->hdr.cmd != REPLY_RX) && + (pkt->hdr.cmd != REPLY_COMPRESSED_BA) && + (pkt->hdr.cmd != STATISTICS_NOTIFICATION) && + (pkt->hdr.cmd != REPLY_TX); + + /* Based on type of command response or notification, + * handle those that need handling via function in + * rx_handlers table. See iwl4965_setup_rx_handlers() */ + if (priv->rx_handlers[pkt->hdr.cmd]) { + IWL_DEBUG(IWL_DL_RX, "r = %d, i = %d, %s, 0x%02x\n", r, + i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); + priv->rx_handlers[pkt->hdr.cmd] (priv, rxb); + } else { + /* No handling needed */ + IWL_DEBUG(IWL_DL_RX, + "r %d i %d No handler needed for %s, 0x%02x\n", + r, i, get_cmd_string(pkt->hdr.cmd), + pkt->hdr.cmd); + } + + if (reclaim) { + /* Invoke any callbacks, transfer the skb to caller, and + * fire off the (possibly) blocking iwl_send_cmd() + * as we reclaim the driver command queue */ + if (rxb && rxb->skb) + iwl_tx_cmd_complete(priv, rxb); + else + IWL_WARNING("Claim null rxb?\n"); + } + + /* For now we just don't re-use anything. We can tweak this + * later to try and re-use notification packets and SKBs that + * fail to Rx correctly */ + if (rxb->skb != NULL) { + priv->alloc_rxb_skb--; + dev_kfree_skb_any(rxb->skb); + rxb->skb = NULL; + } + + pci_unmap_single(priv->pci_dev, rxb->dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); + spin_lock_irqsave(&rxq->lock, flags); + list_add_tail(&rxb->list, &priv->rxq.rx_used); + spin_unlock_irqrestore(&rxq->lock, flags); + i = (i + 1) & RX_QUEUE_MASK; + /* If there are a lot of unused frames, + * restock the Rx queue so ucode wont assert. */ + if (fill_rx) { + count++; + if (count >= 8) { + priv->rxq.read = i; + __iwl_rx_replenish(priv); + count = 0; + } + } + } + + /* Backtrack one entry */ + priv->rxq.read = i; + iwl_rx_queue_restock(priv); +} + +#ifdef CONFIG_IWLWIFI_DEBUG +static void iwl4965_print_rx_config_cmd(struct iwl_priv *priv) +{ + struct iwl_rxon_cmd *rxon = &priv->staging_rxon; + DECLARE_MAC_BUF(mac); + + IWL_DEBUG_RADIO("RX CONFIG:\n"); + iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon)); + IWL_DEBUG_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon->channel)); + IWL_DEBUG_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags)); + IWL_DEBUG_RADIO("u32 filter_flags: 0x%08x\n", + le32_to_cpu(rxon->filter_flags)); + IWL_DEBUG_RADIO("u8 dev_type: 0x%x\n", rxon->dev_type); + IWL_DEBUG_RADIO("u8 ofdm_basic_rates: 0x%02x\n", + rxon->ofdm_basic_rates); + IWL_DEBUG_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates); + IWL_DEBUG_RADIO("u8[6] node_addr: %s\n", + print_mac(mac, rxon->node_addr)); + IWL_DEBUG_RADIO("u8[6] bssid_addr: %s\n", + print_mac(mac, rxon->bssid_addr)); + IWL_DEBUG_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id)); +} +#endif + +static void iwl4965_enable_interrupts(struct iwl_priv *priv) +{ + IWL_DEBUG_ISR("Enabling interrupts\n"); + set_bit(STATUS_INT_ENABLED, &priv->status); + iwl_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK); +} + +/* call this function to flush any scheduled tasklet */ +static inline void iwl_synchronize_irq(struct iwl_priv *priv) +{ + /* wait to make sure we flush pedding tasklet*/ + synchronize_irq(priv->pci_dev->irq); + tasklet_kill(&priv->irq_tasklet); +} + +static inline void iwl4965_disable_interrupts(struct iwl_priv *priv) +{ + clear_bit(STATUS_INT_ENABLED, &priv->status); + + /* disable interrupts from uCode/NIC to host */ + iwl_write32(priv, CSR_INT_MASK, 0x00000000); + + /* acknowledge/clear/reset any interrupts still pending + * from uCode or flow handler (Rx/Tx DMA) */ + iwl_write32(priv, CSR_INT, 0xffffffff); + iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff); + IWL_DEBUG_ISR("Disabled interrupts\n"); +} + + +/** + * iwl4965_irq_handle_error - called for HW or SW error interrupt from card + */ +static void iwl4965_irq_handle_error(struct iwl_priv *priv) +{ + /* Set the FW error flag -- cleared on iwl4965_down */ + set_bit(STATUS_FW_ERROR, &priv->status); + + /* Cancel currently queued command. */ + clear_bit(STATUS_HCMD_ACTIVE, &priv->status); + +#ifdef CONFIG_IWLWIFI_DEBUG + if (priv->debug_level & IWL_DL_FW_ERRORS) { + iwl_dump_nic_error_log(priv); + iwl_dump_nic_event_log(priv); + iwl4965_print_rx_config_cmd(priv); + } +#endif + + wake_up_interruptible(&priv->wait_command_queue); + + /* Keep the restart process from trying to send host + * commands by clearing the INIT status bit */ + clear_bit(STATUS_READY, &priv->status); + + if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) { + IWL_DEBUG(IWL_DL_FW_ERRORS, + "Restarting adapter due to uCode error.\n"); + + if (iwl_is_associated(priv)) { + memcpy(&priv->recovery_rxon, &priv->active_rxon, + sizeof(priv->recovery_rxon)); + priv->error_recovering = 1; + } + if (priv->cfg->mod_params->restart_fw) + queue_work(priv->workqueue, &priv->restart); + } +} + +static void iwl4965_error_recovery(struct iwl_priv *priv) +{ + unsigned long flags; + + memcpy(&priv->staging_rxon, &priv->recovery_rxon, + sizeof(priv->staging_rxon)); + priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl4965_commit_rxon(priv); + + iwl_rxon_add_station(priv, priv->bssid, 1); + + spin_lock_irqsave(&priv->lock, flags); + priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id); + priv->error_recovering = 0; + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void iwl4965_irq_tasklet(struct iwl_priv *priv) +{ + u32 inta, handled = 0; + u32 inta_fh; + unsigned long flags; +#ifdef CONFIG_IWLWIFI_DEBUG + u32 inta_mask; +#endif + + spin_lock_irqsave(&priv->lock, flags); + + /* Ack/clear/reset pending uCode interrupts. + * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, + * and will clear only when CSR_FH_INT_STATUS gets cleared. */ + inta = iwl_read32(priv, CSR_INT); + iwl_write32(priv, CSR_INT, inta); + + /* Ack/clear/reset pending flow-handler (DMA) interrupts. + * Any new interrupts that happen after this, either while we're + * in this tasklet, or later, will show up in next ISR/tasklet. */ + inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); + iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh); + +#ifdef CONFIG_IWLWIFI_DEBUG + if (priv->debug_level & IWL_DL_ISR) { + /* just for debug */ + inta_mask = iwl_read32(priv, CSR_INT_MASK); + IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", + inta, inta_mask, inta_fh); + } +#endif + + /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not + * atomic, make sure that inta covers all the interrupts that + * we've discovered, even if FH interrupt came in just after + * reading CSR_INT. */ + if (inta_fh & CSR49_FH_INT_RX_MASK) + inta |= CSR_INT_BIT_FH_RX; + if (inta_fh & CSR49_FH_INT_TX_MASK) + inta |= CSR_INT_BIT_FH_TX; + + /* Now service all interrupt bits discovered above. */ + if (inta & CSR_INT_BIT_HW_ERR) { + IWL_ERROR("Microcode HW error detected. Restarting.\n"); + + /* Tell the device to stop sending interrupts */ + iwl4965_disable_interrupts(priv); + + iwl4965_irq_handle_error(priv); + + handled |= CSR_INT_BIT_HW_ERR; + + spin_unlock_irqrestore(&priv->lock, flags); + + return; + } + +#ifdef CONFIG_IWLWIFI_DEBUG + if (priv->debug_level & (IWL_DL_ISR)) { + /* NIC fires this, but we don't use it, redundant with WAKEUP */ + if (inta & CSR_INT_BIT_SCD) + IWL_DEBUG_ISR("Scheduler finished to transmit " + "the frame/frames.\n"); + + /* Alive notification via Rx interrupt will do the real work */ + if (inta & CSR_INT_BIT_ALIVE) + IWL_DEBUG_ISR("Alive interrupt\n"); + } +#endif + /* Safely ignore these bits for debug checks below */ + inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); + + /* HW RF KILL switch toggled */ + if (inta & CSR_INT_BIT_RF_KILL) { + int hw_rf_kill = 0; + if (!(iwl_read32(priv, CSR_GP_CNTRL) & + CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) + hw_rf_kill = 1; + + IWL_DEBUG(IWL_DL_RF_KILL, "RF_KILL bit toggled to %s.\n", + hw_rf_kill ? "disable radio":"enable radio"); + + /* driver only loads ucode once setting the interface up. + * the driver as well won't allow loading if RFKILL is set + * therefore no need to restart the driver from this handler + */ + if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) + clear_bit(STATUS_RF_KILL_HW, &priv->status); + + handled |= CSR_INT_BIT_RF_KILL; + } + + /* Chip got too hot and stopped itself */ + if (inta & CSR_INT_BIT_CT_KILL) { + IWL_ERROR("Microcode CT kill error detected.\n"); + handled |= CSR_INT_BIT_CT_KILL; + } + + /* Error detected by uCode */ + if (inta & CSR_INT_BIT_SW_ERR) { + IWL_ERROR("Microcode SW error detected. Restarting 0x%X.\n", + inta); + iwl4965_irq_handle_error(priv); + handled |= CSR_INT_BIT_SW_ERR; + } + + /* uCode wakes up after power-down sleep */ + if (inta & CSR_INT_BIT_WAKEUP) { + IWL_DEBUG_ISR("Wakeup interrupt\n"); + iwl_rx_queue_update_write_ptr(priv, &priv->rxq); + iwl_txq_update_write_ptr(priv, &priv->txq[0]); + iwl_txq_update_write_ptr(priv, &priv->txq[1]); + iwl_txq_update_write_ptr(priv, &priv->txq[2]); + iwl_txq_update_write_ptr(priv, &priv->txq[3]); + iwl_txq_update_write_ptr(priv, &priv->txq[4]); + iwl_txq_update_write_ptr(priv, &priv->txq[5]); + + handled |= CSR_INT_BIT_WAKEUP; + } + + /* All uCode command responses, including Tx command responses, + * Rx "responses" (frame-received notification), and other + * notifications from uCode come through here*/ + if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { + iwl_rx_handle(priv); + handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); + } + + if (inta & CSR_INT_BIT_FH_TX) { + IWL_DEBUG_ISR("Tx interrupt\n"); + handled |= CSR_INT_BIT_FH_TX; + /* FH finished to write, send event */ + priv->ucode_write_complete = 1; + wake_up_interruptible(&priv->wait_command_queue); + } + + if (inta & ~handled) + IWL_ERROR("Unhandled INTA bits 0x%08x\n", inta & ~handled); + + if (inta & ~CSR_INI_SET_MASK) { + IWL_WARNING("Disabled INTA bits 0x%08x were pending\n", + inta & ~CSR_INI_SET_MASK); + IWL_WARNING(" with FH_INT = 0x%08x\n", inta_fh); + } + + /* Re-enable all interrupts */ + /* only Re-enable if diabled by irq */ + if (test_bit(STATUS_INT_ENABLED, &priv->status)) + iwl4965_enable_interrupts(priv); + +#ifdef CONFIG_IWLWIFI_DEBUG + if (priv->debug_level & (IWL_DL_ISR)) { + inta = iwl_read32(priv, CSR_INT); + inta_mask = iwl_read32(priv, CSR_INT_MASK); + inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); + IWL_DEBUG_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " + "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); + } +#endif + spin_unlock_irqrestore(&priv->lock, flags); +} + +static irqreturn_t iwl4965_isr(int irq, void *data) +{ + struct iwl_priv *priv = data; + u32 inta, inta_mask; + u32 inta_fh; + if (!priv) + return IRQ_NONE; + + spin_lock(&priv->lock); + + /* Disable (but don't clear!) interrupts here to avoid + * back-to-back ISRs and sporadic interrupts from our NIC. + * If we have something to service, the tasklet will re-enable ints. + * If we *don't* have something, we'll re-enable before leaving here. */ + inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */ + iwl_write32(priv, CSR_INT_MASK, 0x00000000); + + /* Discover which interrupts are active/pending */ + inta = iwl_read32(priv, CSR_INT); + inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); + + /* Ignore interrupt if there's nothing in NIC to service. + * This may be due to IRQ shared with another device, + * or due to sporadic interrupts thrown from our NIC. */ + if (!inta && !inta_fh) { + IWL_DEBUG_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n"); + goto none; + } + + if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { + /* Hardware disappeared. It might have already raised + * an interrupt */ + IWL_WARNING("HARDWARE GONE?? INTA == 0x%080x\n", inta); + goto unplugged; + } + + IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", + inta, inta_mask, inta_fh); + + inta &= ~CSR_INT_BIT_SCD; + + /* iwl4965_irq_tasklet() will service interrupts and re-enable them */ + if (likely(inta || inta_fh)) + tasklet_schedule(&priv->irq_tasklet); + + unplugged: + spin_unlock(&priv->lock); + return IRQ_HANDLED; + + none: + /* re-enable interrupts here since we don't have anything to service. */ + /* only Re-enable if diabled by irq */ + if (test_bit(STATUS_INT_ENABLED, &priv->status)) + iwl4965_enable_interrupts(priv); + spin_unlock(&priv->lock); + return IRQ_NONE; +} + +/****************************************************************************** + * + * uCode download functions + * + ******************************************************************************/ + +static void iwl4965_dealloc_ucode_pci(struct iwl_priv *priv) +{ + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code); + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data); + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup); + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init); + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data); + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot); +} + +static void iwl4965_nic_start(struct iwl_priv *priv) +{ + /* Remove all resets to allow NIC to operate */ + iwl_write32(priv, CSR_RESET, 0); +} + + +/** + * iwl4965_read_ucode - Read uCode images from disk file. + * + * Copy into buffers for card to fetch via bus-mastering + */ +static int iwl4965_read_ucode(struct iwl_priv *priv) +{ + struct iwl_ucode *ucode; + int ret; + const struct firmware *ucode_raw; + const char *name = priv->cfg->fw_name; + u8 *src; + size_t len; + u32 ver, inst_size, data_size, init_size, init_data_size, boot_size; + + /* Ask kernel firmware_class module to get the boot firmware off disk. + * request_firmware() is synchronous, file is in memory on return. */ + ret = request_firmware(&ucode_raw, name, &priv->pci_dev->dev); + if (ret < 0) { + IWL_ERROR("%s firmware file req failed: Reason %d\n", + name, ret); + goto error; + } + + IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n", + name, ucode_raw->size); + + /* Make sure that we got at least our header! */ + if (ucode_raw->size < sizeof(*ucode)) { + IWL_ERROR("File size way too small!\n"); + ret = -EINVAL; + goto err_release; + } + + /* Data from ucode file: header followed by uCode images */ + ucode = (void *)ucode_raw->data; + + ver = le32_to_cpu(ucode->ver); + inst_size = le32_to_cpu(ucode->inst_size); + data_size = le32_to_cpu(ucode->data_size); + init_size = le32_to_cpu(ucode->init_size); + init_data_size = le32_to_cpu(ucode->init_data_size); + boot_size = le32_to_cpu(ucode->boot_size); + + IWL_DEBUG_INFO("f/w package hdr ucode version = 0x%x\n", ver); + IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n", + inst_size); + IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n", + data_size); + IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n", + init_size); + IWL_DEBUG_INFO("f/w package hdr init data size = %u\n", + init_data_size); + IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n", + boot_size); + + /* Verify size of file vs. image size info in file's header */ + if (ucode_raw->size < sizeof(*ucode) + + inst_size + data_size + init_size + + init_data_size + boot_size) { + + IWL_DEBUG_INFO("uCode file size %d too small\n", + (int)ucode_raw->size); + ret = -EINVAL; + goto err_release; + } + + /* Verify that uCode images will fit in card's SRAM */ + if (inst_size > priv->hw_params.max_inst_size) { + IWL_DEBUG_INFO("uCode instr len %d too large to fit in\n", + inst_size); + ret = -EINVAL; + goto err_release; + } + + if (data_size > priv->hw_params.max_data_size) { + IWL_DEBUG_INFO("uCode data len %d too large to fit in\n", + data_size); + ret = -EINVAL; + goto err_release; + } + if (init_size > priv->hw_params.max_inst_size) { + IWL_DEBUG_INFO + ("uCode init instr len %d too large to fit in\n", + init_size); + ret = -EINVAL; + goto err_release; + } + if (init_data_size > priv->hw_params.max_data_size) { + IWL_DEBUG_INFO + ("uCode init data len %d too large to fit in\n", + init_data_size); + ret = -EINVAL; + goto err_release; + } + if (boot_size > priv->hw_params.max_bsm_size) { + IWL_DEBUG_INFO + ("uCode boot instr len %d too large to fit in\n", + boot_size); + ret = -EINVAL; + goto err_release; + } + + /* Allocate ucode buffers for card's bus-master loading ... */ + + /* Runtime instructions and 2 copies of data: + * 1) unmodified from disk + * 2) backup cache for save/restore during power-downs */ + priv->ucode_code.len = inst_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code); + + priv->ucode_data.len = data_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data); + + priv->ucode_data_backup.len = data_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup); + + /* Initialization instructions and data */ + if (init_size && init_data_size) { + priv->ucode_init.len = init_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init); + + priv->ucode_init_data.len = init_data_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data); + + if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr) + goto err_pci_alloc; + } + + /* Bootstrap (instructions only, no data) */ + if (boot_size) { + priv->ucode_boot.len = boot_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot); + + if (!priv->ucode_boot.v_addr) + goto err_pci_alloc; + } + + /* Copy images into buffers for card's bus-master reads ... */ + + /* Runtime instructions (first block of data in file) */ + src = &ucode->data[0]; + len = priv->ucode_code.len; + IWL_DEBUG_INFO("Copying (but not loading) uCode instr len %Zd\n", len); + memcpy(priv->ucode_code.v_addr, src, len); + IWL_DEBUG_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", + priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr); + + /* Runtime data (2nd block) + * NOTE: Copy into backup buffer will be done in iwl4965_up() */ + src = &ucode->data[inst_size]; + len = priv->ucode_data.len; + IWL_DEBUG_INFO("Copying (but not loading) uCode data len %Zd\n", len); + memcpy(priv->ucode_data.v_addr, src, len); + memcpy(priv->ucode_data_backup.v_addr, src, len); + + /* Initialization instructions (3rd block) */ + if (init_size) { + src = &ucode->data[inst_size + data_size]; + len = priv->ucode_init.len; + IWL_DEBUG_INFO("Copying (but not loading) init instr len %Zd\n", + len); + memcpy(priv->ucode_init.v_addr, src, len); + } + + /* Initialization data (4th block) */ + if (init_data_size) { + src = &ucode->data[inst_size + data_size + init_size]; + len = priv->ucode_init_data.len; + IWL_DEBUG_INFO("Copying (but not loading) init data len %Zd\n", + len); + memcpy(priv->ucode_init_data.v_addr, src, len); + } + + /* Bootstrap instructions (5th block) */ + src = &ucode->data[inst_size + data_size + init_size + init_data_size]; + len = priv->ucode_boot.len; + IWL_DEBUG_INFO("Copying (but not loading) boot instr len %Zd\n", len); + memcpy(priv->ucode_boot.v_addr, src, len); + + /* We have our copies now, allow OS release its copies */ + release_firmware(ucode_raw); + return 0; + + err_pci_alloc: + IWL_ERROR("failed to allocate pci memory\n"); + ret = -ENOMEM; + iwl4965_dealloc_ucode_pci(priv); + + err_release: + release_firmware(ucode_raw); + + error: + return ret; +} + +/** + * iwl_alive_start - called after REPLY_ALIVE notification received + * from protocol/runtime uCode (initialization uCode's + * Alive gets handled by iwl_init_alive_start()). + */ +static void iwl_alive_start(struct iwl_priv *priv) +{ + int ret = 0; + + IWL_DEBUG_INFO("Runtime Alive received.\n"); + + if (priv->card_alive.is_valid != UCODE_VALID_OK) { + /* We had an error bringing up the hardware, so take it + * all the way back down so we can try again */ + IWL_DEBUG_INFO("Alive failed.\n"); + goto restart; + } + + /* Initialize uCode has loaded Runtime uCode ... verify inst image. + * This is a paranoid check, because we would not have gotten the + * "runtime" alive if code weren't properly loaded. */ + if (iwl_verify_ucode(priv)) { + /* Runtime instruction load was bad; + * take it all the way back down so we can try again */ + IWL_DEBUG_INFO("Bad runtime uCode load.\n"); + goto restart; + } + + iwl_clear_stations_table(priv); + ret = priv->cfg->ops->lib->alive_notify(priv); + if (ret) { + IWL_WARNING("Could not complete ALIVE transition [ntf]: %d\n", + ret); + goto restart; + } + + /* After the ALIVE response, we can send host commands to 4965 uCode */ + set_bit(STATUS_ALIVE, &priv->status); + + if (iwl_is_rfkill(priv)) + return; + + ieee80211_wake_queues(priv->hw); + + priv->active_rate = priv->rates_mask; + priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK; + + if (iwl_is_associated(priv)) { + struct iwl_rxon_cmd *active_rxon = + (struct iwl_rxon_cmd *)&priv->active_rxon; + + memcpy(&priv->staging_rxon, &priv->active_rxon, + sizeof(priv->staging_rxon)); + active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; + } else { + /* Initialize our rx_config data */ + iwl4965_connection_init_rx_config(priv); + memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); + } + + /* Configure Bluetooth device coexistence support */ + iwl4965_send_bt_config(priv); + + iwl_reset_run_time_calib(priv); + + /* Configure the adapter for unassociated operation */ + iwl4965_commit_rxon(priv); + + /* At this point, the NIC is initialized and operational */ + iwl_rf_kill_ct_config(priv); + + iwl_leds_register(priv); + + IWL_DEBUG_INFO("ALIVE processing complete.\n"); + set_bit(STATUS_READY, &priv->status); + wake_up_interruptible(&priv->wait_command_queue); + + if (priv->error_recovering) + iwl4965_error_recovery(priv); + + iwl_power_update_mode(priv, 1); + ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); + + if (test_and_clear_bit(STATUS_MODE_PENDING, &priv->status)) + iwl4965_set_mode(priv, priv->iw_mode); + + return; + + restart: + queue_work(priv->workqueue, &priv->restart); +} + +static void iwl_cancel_deferred_work(struct iwl_priv *priv); + +static void __iwl4965_down(struct iwl_priv *priv) +{ + unsigned long flags; + int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status); + + IWL_DEBUG_INFO(DRV_NAME " is going down\n"); + + if (!exit_pending) + set_bit(STATUS_EXIT_PENDING, &priv->status); + + iwl_leds_unregister(priv); + + iwl_clear_stations_table(priv); + + /* Unblock any waiting calls */ + wake_up_interruptible_all(&priv->wait_command_queue); + + /* Wipe out the EXIT_PENDING status bit if we are not actually + * exiting the module */ + if (!exit_pending) + clear_bit(STATUS_EXIT_PENDING, &priv->status); + + /* stop and reset the on-board processor */ + iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); + + /* tell the device to stop sending interrupts */ + spin_lock_irqsave(&priv->lock, flags); + iwl4965_disable_interrupts(priv); + spin_unlock_irqrestore(&priv->lock, flags); + iwl_synchronize_irq(priv); + + if (priv->mac80211_registered) + ieee80211_stop_queues(priv->hw); + + /* If we have not previously called iwl4965_init() then + * clear all bits but the RF Kill and SUSPEND bits and return */ + if (!iwl_is_init(priv)) { + priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) << + STATUS_RF_KILL_HW | + test_bit(STATUS_RF_KILL_SW, &priv->status) << + STATUS_RF_KILL_SW | + test_bit(STATUS_GEO_CONFIGURED, &priv->status) << + STATUS_GEO_CONFIGURED | + test_bit(STATUS_IN_SUSPEND, &priv->status) << + STATUS_IN_SUSPEND | + test_bit(STATUS_EXIT_PENDING, &priv->status) << + STATUS_EXIT_PENDING; + goto exit; + } + + /* ...otherwise clear out all the status bits but the RF Kill and + * SUSPEND bits and continue taking the NIC down. */ + priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) << + STATUS_RF_KILL_HW | + test_bit(STATUS_RF_KILL_SW, &priv->status) << + STATUS_RF_KILL_SW | + test_bit(STATUS_GEO_CONFIGURED, &priv->status) << + STATUS_GEO_CONFIGURED | + test_bit(STATUS_IN_SUSPEND, &priv->status) << + STATUS_IN_SUSPEND | + test_bit(STATUS_FW_ERROR, &priv->status) << + STATUS_FW_ERROR | + test_bit(STATUS_EXIT_PENDING, &priv->status) << + STATUS_EXIT_PENDING; + + spin_lock_irqsave(&priv->lock, flags); + iwl_clear_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + spin_unlock_irqrestore(&priv->lock, flags); + + iwl_txq_ctx_stop(priv); + iwl_rxq_stop(priv); + + spin_lock_irqsave(&priv->lock, flags); + if (!iwl_grab_nic_access(priv)) { + iwl_write_prph(priv, APMG_CLK_DIS_REG, + APMG_CLK_VAL_DMA_CLK_RQT); + iwl_release_nic_access(priv); + } + spin_unlock_irqrestore(&priv->lock, flags); + + udelay(5); + + /* FIXME: apm_ops.suspend(priv) */ + priv->cfg->ops->lib->apm_ops.reset(priv); + priv->cfg->ops->lib->free_shared_mem(priv); + + exit: + memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp)); + + if (priv->ibss_beacon) + dev_kfree_skb(priv->ibss_beacon); + priv->ibss_beacon = NULL; + + /* clear out any free frames */ + iwl_clear_free_frames(priv); +} + +static void iwl4965_down(struct iwl_priv *priv) +{ + mutex_lock(&priv->mutex); + __iwl4965_down(priv); + mutex_unlock(&priv->mutex); + + iwl_cancel_deferred_work(priv); +} + +#define MAX_HW_RESTARTS 5 + +static int __iwl4965_up(struct iwl_priv *priv) +{ + int i; + int ret; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { + IWL_WARNING("Exit pending; will not bring the NIC up\n"); + return -EIO; + } + + if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { + IWL_ERROR("ucode not available for device bringup\n"); + return -EIO; + } + + /* If platform's RF_KILL switch is NOT set to KILL */ + if (iwl_read32(priv, CSR_GP_CNTRL) & + CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) + clear_bit(STATUS_RF_KILL_HW, &priv->status); + else + set_bit(STATUS_RF_KILL_HW, &priv->status); + + if (!test_bit(STATUS_IN_SUSPEND, &priv->status) && + iwl_is_rfkill(priv)) { + IWL_WARNING("Radio disabled by %s RF Kill switch\n", + test_bit(STATUS_RF_KILL_HW, &priv->status) ? "HW" : "SW"); + return -ENODEV; + } + + iwl_write32(priv, CSR_INT, 0xFFFFFFFF); + + ret = priv->cfg->ops->lib->alloc_shared_mem(priv); + if (ret) { + IWL_ERROR("Unable to allocate shared memory\n"); + return ret; + } + + ret = iwl_hw_nic_init(priv); + if (ret) { + IWL_ERROR("Unable to init nic\n"); + return ret; + } + + /* make sure rfkill handshake bits are cleared */ + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + + /* clear (again), then enable host interrupts */ + iwl_write32(priv, CSR_INT, 0xFFFFFFFF); + iwl4965_enable_interrupts(priv); + + /* really make sure rfkill handshake bits are cleared */ + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + + /* Copy original ucode data image from disk into backup cache. + * This will be used to initialize the on-board processor's + * data SRAM for a clean start when the runtime program first loads. */ + memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, + priv->ucode_data.len); + + /* We return success when we resume from suspend and rf_kill is on. */ + if (test_bit(STATUS_RF_KILL_HW, &priv->status) || + test_bit(STATUS_RF_KILL_SW, &priv->status)) + return 0; + + for (i = 0; i < MAX_HW_RESTARTS; i++) { + + iwl_clear_stations_table(priv); + + /* load bootstrap state machine, + * load bootstrap program into processor's memory, + * prepare to load the "initialize" uCode */ + ret = priv->cfg->ops->lib->load_ucode(priv); + + if (ret) { + IWL_ERROR("Unable to set up bootstrap uCode: %d\n", ret); + continue; + } + + /* Clear out the uCode error bit if it is set */ + clear_bit(STATUS_FW_ERROR, &priv->status); + + /* start card; "initialize" will load runtime ucode */ + iwl4965_nic_start(priv); + + IWL_DEBUG_INFO(DRV_NAME " is coming up\n"); + + return 0; + } + + set_bit(STATUS_EXIT_PENDING, &priv->status); + __iwl4965_down(priv); + clear_bit(STATUS_EXIT_PENDING, &priv->status); + + /* tried to restart and config the device for as long as our + * patience could withstand */ + IWL_ERROR("Unable to initialize device after %d attempts.\n", i); + return -EIO; +} + + +/***************************************************************************** + * + * Workqueue callbacks + * + *****************************************************************************/ + +static void iwl_bg_init_alive_start(struct work_struct *data) +{ + struct iwl_priv *priv = + container_of(data, struct iwl_priv, init_alive_start.work); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + priv->cfg->ops->lib->init_alive_start(priv); + mutex_unlock(&priv->mutex); +} + +static void iwl_bg_alive_start(struct work_struct *data) +{ + struct iwl_priv *priv = + container_of(data, struct iwl_priv, alive_start.work); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + iwl_alive_start(priv); + mutex_unlock(&priv->mutex); +} + +static void iwl4965_bg_rf_kill(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, struct iwl_priv, rf_kill); + + wake_up_interruptible(&priv->wait_command_queue); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + + if (!iwl_is_rfkill(priv)) { + IWL_DEBUG(IWL_DL_RF_KILL, + "HW and/or SW RF Kill no longer active, restarting " + "device\n"); + if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) + queue_work(priv->workqueue, &priv->restart); + } else { + /* make sure mac80211 stop sending Tx frame */ + if (priv->mac80211_registered) + ieee80211_stop_queues(priv->hw); + + if (!test_bit(STATUS_RF_KILL_HW, &priv->status)) + IWL_DEBUG_RF_KILL("Can not turn radio back on - " + "disabled by SW switch\n"); + else + IWL_WARNING("Radio Frequency Kill Switch is On:\n" + "Kill switch must be turned off for " + "wireless networking to work.\n"); + } + mutex_unlock(&priv->mutex); + iwl_rfkill_set_hw_state(priv); +} + +static void iwl4965_bg_set_monitor(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, + struct iwl_priv, set_monitor); + int ret; + + IWL_DEBUG(IWL_DL_STATE, "setting monitor mode\n"); + + mutex_lock(&priv->mutex); + + ret = iwl4965_set_mode(priv, IEEE80211_IF_TYPE_MNTR); + + if (ret) { + if (ret == -EAGAIN) + IWL_DEBUG(IWL_DL_STATE, "leave - not ready\n"); + else + IWL_ERROR("iwl4965_set_mode() failed ret = %d\n", ret); + } + + mutex_unlock(&priv->mutex); +} + +static void iwl_bg_run_time_calib_work(struct work_struct *work) +{ + struct iwl_priv *priv = container_of(work, struct iwl_priv, + run_time_calib_work); + + mutex_lock(&priv->mutex); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status) || + test_bit(STATUS_SCANNING, &priv->status)) { + mutex_unlock(&priv->mutex); + return; + } + + if (priv->start_calib) { + iwl_chain_noise_calibration(priv, &priv->statistics); + + iwl_sensitivity_calibration(priv, &priv->statistics); + } + + mutex_unlock(&priv->mutex); + return; +} + +static void iwl4965_bg_up(struct work_struct *data) +{ + struct iwl_priv *priv = container_of(data, struct iwl_priv, up); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + __iwl4965_up(priv); + mutex_unlock(&priv->mutex); + iwl_rfkill_set_hw_state(priv); +} + +static void iwl4965_bg_restart(struct work_struct *data) +{ + struct iwl_priv *priv = container_of(data, struct iwl_priv, restart); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + iwl4965_down(priv); + queue_work(priv->workqueue, &priv->up); +} + +static void iwl4965_bg_rx_replenish(struct work_struct *data) +{ + struct iwl_priv *priv = + container_of(data, struct iwl_priv, rx_replenish); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + iwl_rx_replenish(priv); + mutex_unlock(&priv->mutex); +} + +#define IWL_DELAY_NEXT_SCAN (HZ*2) + +static void iwl4965_post_associate(struct iwl_priv *priv) +{ + struct ieee80211_conf *conf = NULL; + int ret = 0; + DECLARE_MAC_BUF(mac); + unsigned long flags; + + if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__); + return; + } + + IWL_DEBUG_ASSOC("Associated as %d to: %s\n", + priv->assoc_id, + print_mac(mac, priv->active_rxon.bssid_addr)); + + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + + if (!priv->vif || !priv->is_open) + return; + + iwl_scan_cancel_timeout(priv, 200); + + conf = ieee80211_get_hw_conf(priv->hw); + + priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl4965_commit_rxon(priv); + + memset(&priv->rxon_timing, 0, sizeof(struct iwl4965_rxon_time_cmd)); + iwl4965_setup_rxon_timing(priv); + ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING, + sizeof(priv->rxon_timing), &priv->rxon_timing); + if (ret) + IWL_WARNING("REPLY_RXON_TIMING failed - " + "Attempting to continue.\n"); + + priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK; + + if (priv->current_ht_config.is_ht) + iwl_set_rxon_ht(priv, &priv->current_ht_config); + + iwl_set_rxon_chain(priv); + priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id); + + IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n", + priv->assoc_id, priv->beacon_int); + + if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE) + priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; + else + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; + + if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) { + if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME) + priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; + else + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; + + if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; + + } + + iwl4965_commit_rxon(priv); + + switch (priv->iw_mode) { + case IEEE80211_IF_TYPE_STA: + break; + + case IEEE80211_IF_TYPE_IBSS: + + /* assume default assoc id */ + priv->assoc_id = 1; + + iwl_rxon_add_station(priv, priv->bssid, 0); + iwl4965_send_beacon_cmd(priv); + + break; + + default: + IWL_ERROR("%s Should not be called in %d mode\n", + __FUNCTION__, priv->iw_mode); + break; + } + + /* Enable Rx differential gain and sensitivity calibrations */ + iwl_chain_noise_reset(priv); + priv->start_calib = 1; + + if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) + priv->assoc_station_added = 1; + + spin_lock_irqsave(&priv->lock, flags); + iwl_activate_qos(priv, 0); + spin_unlock_irqrestore(&priv->lock, flags); + + iwl_power_update_mode(priv, 0); + /* we have just associated, don't start scan too early */ + priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN; +} + +static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf); + +static void iwl_bg_scan_completed(struct work_struct *work) +{ + struct iwl_priv *priv = + container_of(work, struct iwl_priv, scan_completed); + + IWL_DEBUG_SCAN("SCAN complete scan\n"); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (test_bit(STATUS_CONF_PENDING, &priv->status)) + iwl4965_mac_config(priv->hw, ieee80211_get_hw_conf(priv->hw)); + + ieee80211_scan_completed(priv->hw); + + /* Since setting the TXPOWER may have been deferred while + * performing the scan, fire one off */ + mutex_lock(&priv->mutex); + iwl_set_tx_power(priv, priv->tx_power_user_lmt, true); + mutex_unlock(&priv->mutex); +} + +/***************************************************************************** + * + * mac80211 entry point functions + * + *****************************************************************************/ + +#define UCODE_READY_TIMEOUT (4 * HZ) + +static int iwl4965_mac_start(struct ieee80211_hw *hw) +{ + struct iwl_priv *priv = hw->priv; + int ret; + + IWL_DEBUG_MAC80211("enter\n"); + + if (pci_enable_device(priv->pci_dev)) { + IWL_ERROR("Fail to pci_enable_device\n"); + return -ENODEV; + } + pci_restore_state(priv->pci_dev); + pci_enable_msi(priv->pci_dev); + + ret = request_irq(priv->pci_dev->irq, iwl4965_isr, IRQF_SHARED, + DRV_NAME, priv); + if (ret) { + IWL_ERROR("Error allocating IRQ %d\n", priv->pci_dev->irq); + goto out_disable_msi; + } + + /* we should be verifying the device is ready to be opened */ + mutex_lock(&priv->mutex); + + memset(&priv->staging_rxon, 0, sizeof(struct iwl_rxon_cmd)); + /* fetch ucode file from disk, alloc and copy to bus-master buffers ... + * ucode filename and max sizes are card-specific. */ + + if (!priv->ucode_code.len) { + ret = iwl4965_read_ucode(priv); + if (ret) { + IWL_ERROR("Could not read microcode: %d\n", ret); + mutex_unlock(&priv->mutex); + goto out_release_irq; + } + } + + ret = __iwl4965_up(priv); + + mutex_unlock(&priv->mutex); + + iwl_rfkill_set_hw_state(priv); + + if (ret) + goto out_release_irq; + + IWL_DEBUG_INFO("Start UP work done.\n"); + + if (test_bit(STATUS_IN_SUSPEND, &priv->status)) + return 0; + + /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from + * mac80211 will not be run successfully. */ + ret = wait_event_interruptible_timeout(priv->wait_command_queue, + test_bit(STATUS_READY, &priv->status), + UCODE_READY_TIMEOUT); + if (!ret) { + if (!test_bit(STATUS_READY, &priv->status)) { + IWL_ERROR("START_ALIVE timeout after %dms.\n", + jiffies_to_msecs(UCODE_READY_TIMEOUT)); + ret = -ETIMEDOUT; + goto out_release_irq; + } + } + + priv->is_open = 1; + IWL_DEBUG_MAC80211("leave\n"); + return 0; + +out_release_irq: + free_irq(priv->pci_dev->irq, priv); +out_disable_msi: + pci_disable_msi(priv->pci_dev); + pci_disable_device(priv->pci_dev); + priv->is_open = 0; + IWL_DEBUG_MAC80211("leave - failed\n"); + return ret; +} + +static void iwl4965_mac_stop(struct ieee80211_hw *hw) +{ + struct iwl_priv *priv = hw->priv; + + IWL_DEBUG_MAC80211("enter\n"); + + if (!priv->is_open) { + IWL_DEBUG_MAC80211("leave - skip\n"); + return; + } + + priv->is_open = 0; + + if (iwl_is_ready_rf(priv)) { + /* stop mac, cancel any scan request and clear + * RXON_FILTER_ASSOC_MSK BIT + */ + mutex_lock(&priv->mutex); + iwl_scan_cancel_timeout(priv, 100); + mutex_unlock(&priv->mutex); + } + + iwl4965_down(priv); + + flush_workqueue(priv->workqueue); + free_irq(priv->pci_dev->irq, priv); + pci_disable_msi(priv->pci_dev); + pci_save_state(priv->pci_dev); + pci_disable_device(priv->pci_dev); + + IWL_DEBUG_MAC80211("leave\n"); +} + +static int iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct iwl_priv *priv = hw->priv; + + IWL_DEBUG_MAC80211("enter\n"); + + if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { + IWL_DEBUG_MAC80211("leave - monitor\n"); + dev_kfree_skb_any(skb); + return 0; + } + + IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, + ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); + + if (iwl_tx_skb(priv, skb)) + dev_kfree_skb_any(skb); + + IWL_DEBUG_MAC80211("leave\n"); + return 0; +} + +static int iwl4965_mac_add_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct iwl_priv *priv = hw->priv; + unsigned long flags; + DECLARE_MAC_BUF(mac); + + IWL_DEBUG_MAC80211("enter: type %d\n", conf->type); + + if (priv->vif) { + IWL_DEBUG_MAC80211("leave - vif != NULL\n"); + return -EOPNOTSUPP; + } + + spin_lock_irqsave(&priv->lock, flags); + priv->vif = conf->vif; + + spin_unlock_irqrestore(&priv->lock, flags); + + mutex_lock(&priv->mutex); + + if (conf->mac_addr) { + IWL_DEBUG_MAC80211("Set %s\n", print_mac(mac, conf->mac_addr)); + memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN); + } + + if (iwl4965_set_mode(priv, conf->type) == -EAGAIN) + /* we are not ready, will run again when ready */ + set_bit(STATUS_MODE_PENDING, &priv->status); + + mutex_unlock(&priv->mutex); + + IWL_DEBUG_MAC80211("leave\n"); + return 0; +} + +/** + * iwl4965_mac_config - mac80211 config callback + * + * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to + * be set inappropriately and the driver currently sets the hardware up to + * use it whenever needed. + */ +static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) +{ + struct iwl_priv *priv = hw->priv; + const struct iwl_channel_info *ch_info; + unsigned long flags; + int ret = 0; + u16 channel; + + mutex_lock(&priv->mutex); + IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value); + + priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP); + + if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) { + IWL_DEBUG_MAC80211("leave - RF-KILL - waiting for uCode\n"); + goto out; + } + + if (!conf->radio_enabled) + iwl_radio_kill_sw_disable_radio(priv); + + if (!iwl_is_ready(priv)) { + IWL_DEBUG_MAC80211("leave - not ready\n"); + ret = -EIO; + goto out; + } + + if (unlikely(!priv->cfg->mod_params->disable_hw_scan && + test_bit(STATUS_SCANNING, &priv->status))) { + IWL_DEBUG_MAC80211("leave - scanning\n"); + set_bit(STATUS_CONF_PENDING, &priv->status); + mutex_unlock(&priv->mutex); + return 0; + } + + channel = ieee80211_frequency_to_channel(conf->channel->center_freq); + ch_info = iwl_get_channel_info(priv, conf->channel->band, channel); + if (!is_channel_valid(ch_info)) { + IWL_DEBUG_MAC80211("leave - invalid channel\n"); + ret = -EINVAL; + goto out; + } + + if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS && + !is_channel_ibss(ch_info)) { + IWL_ERROR("channel %d in band %d not IBSS channel\n", + conf->channel->hw_value, conf->channel->band); + ret = -EINVAL; + goto out; + } + + spin_lock_irqsave(&priv->lock, flags); + + + /* if we are switching from ht to 2.4 clear flags + * from any ht related info since 2.4 does not + * support ht */ + if ((le16_to_cpu(priv->staging_rxon.channel) != channel) +#ifdef IEEE80211_CONF_CHANNEL_SWITCH + && !(conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) +#endif + ) + priv->staging_rxon.flags = 0; + + iwl_set_rxon_channel(priv, conf->channel->band, channel); + + iwl_set_flags_for_band(priv, conf->channel->band); + + /* The list of supported rates and rate mask can be different + * for each band; since the band may have changed, reset + * the rate mask to what mac80211 lists */ + iwl4965_set_rate(priv); + + spin_unlock_irqrestore(&priv->lock, flags); + +#ifdef IEEE80211_CONF_CHANNEL_SWITCH + if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) { + iwl4965_hw_channel_switch(priv, conf->channel); + goto out; + } +#endif + + if (!conf->radio_enabled) { + IWL_DEBUG_MAC80211("leave - radio disabled\n"); + goto out; + } + + if (iwl_is_rfkill(priv)) { + IWL_DEBUG_MAC80211("leave - RF kill\n"); + ret = -EIO; + goto out; + } + + IWL_DEBUG_MAC80211("TX Power old=%d new=%d\n", + priv->tx_power_user_lmt, conf->power_level); + + iwl_set_tx_power(priv, conf->power_level, false); + + iwl4965_set_rate(priv); + + if (memcmp(&priv->active_rxon, + &priv->staging_rxon, sizeof(priv->staging_rxon))) + iwl4965_commit_rxon(priv); + else + IWL_DEBUG_INFO("No re-sending same RXON configuration.\n"); + + IWL_DEBUG_MAC80211("leave\n"); + +out: + clear_bit(STATUS_CONF_PENDING, &priv->status); + mutex_unlock(&priv->mutex); + return ret; +} + +static void iwl4965_config_ap(struct iwl_priv *priv) +{ + int ret = 0; + unsigned long flags; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + /* The following should be done only at AP bring up */ + if (!(iwl_is_associated(priv))) { + + /* RXON - unassoc (to set timing command) */ + priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl4965_commit_rxon(priv); + + /* RXON Timing */ + memset(&priv->rxon_timing, 0, sizeof(struct iwl4965_rxon_time_cmd)); + iwl4965_setup_rxon_timing(priv); + ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING, + sizeof(priv->rxon_timing), &priv->rxon_timing); + if (ret) + IWL_WARNING("REPLY_RXON_TIMING failed - " + "Attempting to continue.\n"); + + iwl_set_rxon_chain(priv); + + /* FIXME: what should be the assoc_id for AP? */ + priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id); + if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE) + priv->staging_rxon.flags |= + RXON_FLG_SHORT_PREAMBLE_MSK; + else + priv->staging_rxon.flags &= + ~RXON_FLG_SHORT_PREAMBLE_MSK; + + if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) { + if (priv->assoc_capability & + WLAN_CAPABILITY_SHORT_SLOT_TIME) + priv->staging_rxon.flags |= + RXON_FLG_SHORT_SLOT_MSK; + else + priv->staging_rxon.flags &= + ~RXON_FLG_SHORT_SLOT_MSK; + + if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) + priv->staging_rxon.flags &= + ~RXON_FLG_SHORT_SLOT_MSK; + } + /* restore RXON assoc */ + priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK; + iwl4965_commit_rxon(priv); + spin_lock_irqsave(&priv->lock, flags); + iwl_activate_qos(priv, 1); + spin_unlock_irqrestore(&priv->lock, flags); + iwl_rxon_add_station(priv, iwl_bcast_addr, 0); + } + iwl4965_send_beacon_cmd(priv); + + /* FIXME - we need to add code here to detect a totally new + * configuration, reset the AP, unassoc, rxon timing, assoc, + * clear sta table, add BCAST sta... */ +} + +/* temporary */ +static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb); + +static int iwl4965_mac_config_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_if_conf *conf) +{ + struct iwl_priv *priv = hw->priv; + DECLARE_MAC_BUF(mac); + unsigned long flags; + int rc; + + if (conf == NULL) + return -EIO; + + if (priv->vif != vif) { + IWL_DEBUG_MAC80211("leave - priv->vif != vif\n"); + return 0; + } + + if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS && + conf->changed & IEEE80211_IFCC_BEACON) { + struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); + if (!beacon) + return -ENOMEM; + rc = iwl4965_mac_beacon_update(hw, beacon); + if (rc) + return rc; + } + + if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) && + (!conf->ssid_len)) { + IWL_DEBUG_MAC80211 + ("Leaving in AP mode because HostAPD is not ready.\n"); + return 0; + } + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + mutex_lock(&priv->mutex); + + if (conf->bssid) + IWL_DEBUG_MAC80211("bssid: %s\n", + print_mac(mac, conf->bssid)); + +/* + * very dubious code was here; the probe filtering flag is never set: + * + if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) && + !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) { + */ + + if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + if (!conf->bssid) { + conf->bssid = priv->mac_addr; + memcpy(priv->bssid, priv->mac_addr, ETH_ALEN); + IWL_DEBUG_MAC80211("bssid was set to: %s\n", + print_mac(mac, conf->bssid)); + } + if (priv->ibss_beacon) + dev_kfree_skb(priv->ibss_beacon); + + priv->ibss_beacon = ieee80211_beacon_get(hw, vif); + } + + if (iwl_is_rfkill(priv)) + goto done; + + if (conf->bssid && !is_zero_ether_addr(conf->bssid) && + !is_multicast_ether_addr(conf->bssid)) { + /* If there is currently a HW scan going on in the background + * then we need to cancel it else the RXON below will fail. */ + if (iwl_scan_cancel_timeout(priv, 100)) { + IWL_WARNING("Aborted scan still in progress " + "after 100ms\n"); + IWL_DEBUG_MAC80211("leaving - scan abort failed.\n"); + mutex_unlock(&priv->mutex); + return -EAGAIN; + } + memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN); + + /* TODO: Audit driver for usage of these members and see + * if mac80211 deprecates them (priv->bssid looks like it + * shouldn't be there, but I haven't scanned the IBSS code + * to verify) - jpk */ + memcpy(priv->bssid, conf->bssid, ETH_ALEN); + + if (priv->iw_mode == IEEE80211_IF_TYPE_AP) + iwl4965_config_ap(priv); + else { + rc = iwl4965_commit_rxon(priv); + if ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && rc) + iwl_rxon_add_station( + priv, priv->active_rxon.bssid_addr, 1); + } + + } else { + iwl_scan_cancel_timeout(priv, 100); + priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl4965_commit_rxon(priv); + } + + done: + spin_lock_irqsave(&priv->lock, flags); + if (!conf->ssid_len) + memset(priv->essid, 0, IW_ESSID_MAX_SIZE); + else + memcpy(priv->essid, conf->ssid, conf->ssid_len); + + priv->essid_len = conf->ssid_len; + spin_unlock_irqrestore(&priv->lock, flags); + + IWL_DEBUG_MAC80211("leave\n"); + mutex_unlock(&priv->mutex); + + return 0; +} + +static void iwl4965_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + int mc_count, struct dev_addr_list *mc_list) +{ + struct iwl_priv *priv = hw->priv; + + if (changed_flags & (*total_flags) & FIF_OTHER_BSS) { + IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n", + IEEE80211_IF_TYPE_MNTR, + changed_flags, *total_flags); + /* queue work 'cuz mac80211 is holding a lock which + * prevents us from issuing (synchronous) f/w cmds */ + queue_work(priv->workqueue, &priv->set_monitor); + } + *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | + FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; +} + +static void iwl4965_mac_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct iwl_priv *priv = hw->priv; + + IWL_DEBUG_MAC80211("enter\n"); + + mutex_lock(&priv->mutex); + + if (iwl_is_ready_rf(priv)) { + iwl_scan_cancel_timeout(priv, 100); + priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl4965_commit_rxon(priv); + } + if (priv->vif == conf->vif) { + priv->vif = NULL; + memset(priv->bssid, 0, ETH_ALEN); + memset(priv->essid, 0, IW_ESSID_MAX_SIZE); + priv->essid_len = 0; + } + mutex_unlock(&priv->mutex); + + IWL_DEBUG_MAC80211("leave\n"); + +} + +#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) +static void iwl4965_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct iwl_priv *priv = hw->priv; + + IWL_DEBUG_MAC80211("changes = 0x%X\n", changes); + + if (changes & BSS_CHANGED_ERP_PREAMBLE) { + IWL_DEBUG_MAC80211("ERP_PREAMBLE %d\n", + bss_conf->use_short_preamble); + if (bss_conf->use_short_preamble) + priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; + else + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; + } + + if (changes & BSS_CHANGED_ERP_CTS_PROT) { + IWL_DEBUG_MAC80211("ERP_CTS %d\n", bss_conf->use_cts_prot); + if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ)) + priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK; + else + priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK; + } + + if (changes & BSS_CHANGED_HT) { + IWL_DEBUG_MAC80211("HT %d\n", bss_conf->assoc_ht); + iwl4965_ht_conf(priv, bss_conf); + iwl_set_rxon_chain(priv); + } + + if (changes & BSS_CHANGED_ASSOC) { + IWL_DEBUG_MAC80211("ASSOC %d\n", bss_conf->assoc); + /* This should never happen as this function should + * never be called from interrupt context. */ + if (WARN_ON_ONCE(in_interrupt())) + return; + if (bss_conf->assoc) { + priv->assoc_id = bss_conf->aid; + priv->beacon_int = bss_conf->beacon_int; + priv->power_data.dtim_period = bss_conf->dtim_period; + priv->timestamp = bss_conf->timestamp; + priv->assoc_capability = bss_conf->assoc_capability; + priv->next_scan_jiffies = jiffies + + IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; + mutex_lock(&priv->mutex); + iwl4965_post_associate(priv); + mutex_unlock(&priv->mutex); + } else { + priv->assoc_id = 0; + IWL_DEBUG_MAC80211("DISASSOC %d\n", bss_conf->assoc); + } + } else if (changes && iwl_is_associated(priv) && priv->assoc_id) { + IWL_DEBUG_MAC80211("Associated Changes %d\n", changes); + iwl_send_rxon_assoc(priv); + } + +} + +static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) +{ + int rc = 0; + unsigned long flags; + struct iwl_priv *priv = hw->priv; + + IWL_DEBUG_MAC80211("enter\n"); + + mutex_lock(&priv->mutex); + spin_lock_irqsave(&priv->lock, flags); + + if (!iwl_is_ready_rf(priv)) { + rc = -EIO; + IWL_DEBUG_MAC80211("leave - not ready or exit pending\n"); + goto out_unlock; + } + + if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { /* APs don't scan */ + rc = -EIO; + IWL_ERROR("ERROR: APs don't scan\n"); + goto out_unlock; + } + + /* we don't schedule scan within next_scan_jiffies period */ + if (priv->next_scan_jiffies && + time_after(priv->next_scan_jiffies, jiffies)) { + rc = -EAGAIN; + goto out_unlock; + } + /* if we just finished scan ask for delay */ + if (priv->last_scan_jiffies && time_after(priv->last_scan_jiffies + + IWL_DELAY_NEXT_SCAN, jiffies)) { + rc = -EAGAIN; + goto out_unlock; + } + if (len) { + IWL_DEBUG_SCAN("direct scan for %s [%d]\n ", + iwl_escape_essid(ssid, len), (int)len); + + priv->one_direct_scan = 1; + priv->direct_ssid_len = (u8) + min((u8) len, (u8) IW_ESSID_MAX_SIZE); + memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len); + } else + priv->one_direct_scan = 0; + + rc = iwl_scan_initiate(priv); + + IWL_DEBUG_MAC80211("leave\n"); + +out_unlock: + spin_unlock_irqrestore(&priv->lock, flags); + mutex_unlock(&priv->mutex); + + return rc; +} + +static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw, + struct ieee80211_key_conf *keyconf, const u8 *addr, + u32 iv32, u16 *phase1key) +{ + struct iwl_priv *priv = hw->priv; + u8 sta_id = IWL_INVALID_STATION; + unsigned long flags; + __le16 key_flags = 0; + int i; + DECLARE_MAC_BUF(mac); + + IWL_DEBUG_MAC80211("enter\n"); + + sta_id = iwl_find_station(priv, addr); + if (sta_id == IWL_INVALID_STATION) { + IWL_DEBUG_MAC80211("leave - %s not in station map.\n", + print_mac(mac, addr)); + return; + } + + iwl_scan_cancel_timeout(priv, 100); + + key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); + key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + key_flags &= ~STA_KEY_FLG_INVALID; + + if (sta_id == priv->hw_params.bcast_sta_id) + key_flags |= STA_KEY_MULTICAST_MSK; + + spin_lock_irqsave(&priv->sta_lock, flags); + + priv->stations[sta_id].sta.key.key_flags = key_flags; + priv->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32; + + for (i = 0; i < 5; i++) + priv->stations[sta_id].sta.key.tkip_rx_ttak[i] = + cpu_to_le16(phase1key[i]); + + priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + + iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + + spin_unlock_irqrestore(&priv->sta_lock, flags); + + IWL_DEBUG_MAC80211("leave\n"); +} + +static int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + const u8 *local_addr, const u8 *addr, + struct ieee80211_key_conf *key) +{ + struct iwl_priv *priv = hw->priv; + DECLARE_MAC_BUF(mac); + int ret = 0; + u8 sta_id = IWL_INVALID_STATION; + u8 is_default_wep_key = 0; + + IWL_DEBUG_MAC80211("enter\n"); + + if (priv->hw_params.sw_crypto) { + IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n"); + return -EOPNOTSUPP; + } + + if (is_zero_ether_addr(addr)) + /* only support pairwise keys */ + return -EOPNOTSUPP; + + sta_id = iwl_find_station(priv, addr); + if (sta_id == IWL_INVALID_STATION) { + IWL_DEBUG_MAC80211("leave - %s not in station map.\n", + print_mac(mac, addr)); + return -EINVAL; + + } + + mutex_lock(&priv->mutex); + iwl_scan_cancel_timeout(priv, 100); + mutex_unlock(&priv->mutex); + + /* If we are getting WEP group key and we didn't receive any key mapping + * so far, we are in legacy wep mode (group key only), otherwise we are + * in 1X mode. + * In legacy wep mode, we use another host command to the uCode */ + if (key->alg == ALG_WEP && sta_id == priv->hw_params.bcast_sta_id && + priv->iw_mode != IEEE80211_IF_TYPE_AP) { + if (cmd == SET_KEY) + is_default_wep_key = !priv->key_mapping_key; + else + is_default_wep_key = + (key->hw_key_idx == HW_KEY_DEFAULT); + } + + switch (cmd) { + case SET_KEY: + if (is_default_wep_key) + ret = iwl_set_default_wep_key(priv, key); + else + ret = iwl_set_dynamic_key(priv, key, sta_id); + + IWL_DEBUG_MAC80211("enable hwcrypto key\n"); + break; + case DISABLE_KEY: + if (is_default_wep_key) + ret = iwl_remove_default_wep_key(priv, key); + else + ret = iwl_remove_dynamic_key(priv, key, sta_id); + + IWL_DEBUG_MAC80211("disable hwcrypto key\n"); + break; + default: + ret = -EINVAL; + } + + IWL_DEBUG_MAC80211("leave\n"); + + return ret; +} + +static int iwl4965_mac_conf_tx(struct ieee80211_hw *hw, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct iwl_priv *priv = hw->priv; + unsigned long flags; + int q; + + IWL_DEBUG_MAC80211("enter\n"); + + if (!iwl_is_ready_rf(priv)) { + IWL_DEBUG_MAC80211("leave - RF not ready\n"); + return -EIO; + } + + if (queue >= AC_NUM) { + IWL_DEBUG_MAC80211("leave - queue >= AC_NUM %d\n", queue); + return 0; + } + + if (!priv->qos_data.qos_enable) { + priv->qos_data.qos_active = 0; + IWL_DEBUG_MAC80211("leave - qos not enabled\n"); + return 0; + } + q = AC_NUM - 1 - queue; + + spin_lock_irqsave(&priv->lock, flags); + + priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min); + priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max); + priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs; + priv->qos_data.def_qos_parm.ac[q].edca_txop = + cpu_to_le16((params->txop * 32)); + + priv->qos_data.def_qos_parm.ac[q].reserved1 = 0; + priv->qos_data.qos_active = 1; + + if (priv->iw_mode == IEEE80211_IF_TYPE_AP) + iwl_activate_qos(priv, 1); + else if (priv->assoc_id && iwl_is_associated(priv)) + iwl_activate_qos(priv, 0); + + spin_unlock_irqrestore(&priv->lock, flags); + + IWL_DEBUG_MAC80211("leave\n"); + return 0; +} + +static int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, + enum ieee80211_ampdu_mlme_action action, + const u8 *addr, u16 tid, u16 *ssn) +{ + struct iwl_priv *priv = hw->priv; + DECLARE_MAC_BUF(mac); + + IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n", + print_mac(mac, addr), tid); + + if (!(priv->cfg->sku & IWL_SKU_N)) + return -EACCES; + + switch (action) { + case IEEE80211_AMPDU_RX_START: + IWL_DEBUG_HT("start Rx\n"); + return iwl_rx_agg_start(priv, addr, tid, *ssn); + case IEEE80211_AMPDU_RX_STOP: + IWL_DEBUG_HT("stop Rx\n"); + return iwl_rx_agg_stop(priv, addr, tid); + case IEEE80211_AMPDU_TX_START: + IWL_DEBUG_HT("start Tx\n"); + return iwl_tx_agg_start(priv, addr, tid, ssn); + case IEEE80211_AMPDU_TX_STOP: + IWL_DEBUG_HT("stop Tx\n"); + return iwl_tx_agg_stop(priv, addr, tid); + default: + IWL_DEBUG_HT("unknown\n"); + return -EINVAL; + break; + } + return 0; +} +static int iwl4965_mac_get_tx_stats(struct ieee80211_hw *hw, + struct ieee80211_tx_queue_stats *stats) +{ + struct iwl_priv *priv = hw->priv; + int i, avail; + struct iwl_tx_queue *txq; + struct iwl_queue *q; + unsigned long flags; + + IWL_DEBUG_MAC80211("enter\n"); + + if (!iwl_is_ready_rf(priv)) { + IWL_DEBUG_MAC80211("leave - RF not ready\n"); + return -EIO; + } + + spin_lock_irqsave(&priv->lock, flags); + + for (i = 0; i < AC_NUM; i++) { + txq = &priv->txq[i]; + q = &txq->q; + avail = iwl_queue_space(q); + + stats[i].len = q->n_window - avail; + stats[i].limit = q->n_window - q->high_mark; + stats[i].count = q->n_window; + + } + spin_unlock_irqrestore(&priv->lock, flags); + + IWL_DEBUG_MAC80211("leave\n"); + + return 0; +} + +static int iwl4965_mac_get_stats(struct ieee80211_hw *hw, + struct ieee80211_low_level_stats *stats) +{ + struct iwl_priv *priv = hw->priv; + + priv = hw->priv; + IWL_DEBUG_MAC80211("enter\n"); + IWL_DEBUG_MAC80211("leave\n"); + + return 0; +} + +static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw) +{ + struct iwl_priv *priv = hw->priv; + unsigned long flags; + + mutex_lock(&priv->mutex); + IWL_DEBUG_MAC80211("enter\n"); + + spin_lock_irqsave(&priv->lock, flags); + memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info)); + spin_unlock_irqrestore(&priv->lock, flags); + + iwl_reset_qos(priv); + + spin_lock_irqsave(&priv->lock, flags); + priv->assoc_id = 0; + priv->assoc_capability = 0; + priv->assoc_station_added = 0; + + /* new association get rid of ibss beacon skb */ + if (priv->ibss_beacon) + dev_kfree_skb(priv->ibss_beacon); + + priv->ibss_beacon = NULL; + + priv->beacon_int = priv->hw->conf.beacon_int; + priv->timestamp = 0; + if ((priv->iw_mode == IEEE80211_IF_TYPE_STA)) + priv->beacon_int = 0; + + spin_unlock_irqrestore(&priv->lock, flags); + + if (!iwl_is_ready_rf(priv)) { + IWL_DEBUG_MAC80211("leave - not ready\n"); + mutex_unlock(&priv->mutex); + return; + } + + /* we are restarting association process + * clear RXON_FILTER_ASSOC_MSK bit + */ + if (priv->iw_mode != IEEE80211_IF_TYPE_AP) { + iwl_scan_cancel_timeout(priv, 100); + priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl4965_commit_rxon(priv); + } + + iwl_power_update_mode(priv, 0); + + /* Per mac80211.h: This is only used in IBSS mode... */ + if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { + + IWL_DEBUG_MAC80211("leave - not in IBSS\n"); + mutex_unlock(&priv->mutex); + return; + } + + iwl4965_set_rate(priv); + + mutex_unlock(&priv->mutex); + + IWL_DEBUG_MAC80211("leave\n"); +} + +static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct iwl_priv *priv = hw->priv; + unsigned long flags; + __le64 timestamp; + + mutex_lock(&priv->mutex); + IWL_DEBUG_MAC80211("enter\n"); + + if (!iwl_is_ready_rf(priv)) { + IWL_DEBUG_MAC80211("leave - RF not ready\n"); + mutex_unlock(&priv->mutex); + return -EIO; + } + + if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { + IWL_DEBUG_MAC80211("leave - not IBSS\n"); + mutex_unlock(&priv->mutex); + return -EIO; + } + + spin_lock_irqsave(&priv->lock, flags); + + if (priv->ibss_beacon) + dev_kfree_skb(priv->ibss_beacon); + + priv->ibss_beacon = skb; + + priv->assoc_id = 0; + timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp; + priv->timestamp = le64_to_cpu(timestamp) + (priv->beacon_int * 1000); + + IWL_DEBUG_MAC80211("leave\n"); + spin_unlock_irqrestore(&priv->lock, flags); + + iwl_reset_qos(priv); + + iwl4965_post_associate(priv); + + mutex_unlock(&priv->mutex); + + return 0; +} + +/***************************************************************************** + * + * sysfs attributes + * + *****************************************************************************/ + +#ifdef CONFIG_IWLWIFI_DEBUG + +/* + * The following adds a new attribute to the sysfs representation + * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/) + * used for controlling the debug level. + * + * See the level definitions in iwl for details. + */ + +static ssize_t show_debug_level(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = d->driver_data; + + return sprintf(buf, "0x%08X\n", priv->debug_level); +} +static ssize_t store_debug_level(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = d->driver_data; + char *p = (char *)buf; + u32 val; + + val = simple_strtoul(p, &p, 0); + if (p == buf) + printk(KERN_INFO DRV_NAME + ": %s is not in hex or decimal form.\n", buf); + else + priv->debug_level = val; + + return strnlen(buf, count); +} + +static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, + show_debug_level, store_debug_level); + + +#endif /* CONFIG_IWLWIFI_DEBUG */ + + +static ssize_t show_version(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = d->driver_data; + struct iwl_alive_resp *palive = &priv->card_alive; + ssize_t pos = 0; + u16 eeprom_ver; + + if (palive->is_valid) + pos += sprintf(buf + pos, + "fw version: 0x%01X.0x%01X.0x%01X.0x%01X\n" + "fw type: 0x%01X 0x%01X\n", + palive->ucode_major, palive->ucode_minor, + palive->sw_rev[0], palive->sw_rev[1], + palive->ver_type, palive->ver_subtype); + else + pos += sprintf(buf + pos, "fw not loaded\n"); + + if (priv->eeprom) { + eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION); + pos += sprintf(buf + pos, "EEPROM version: 0x%x\n", + eeprom_ver); + } else { + pos += sprintf(buf + pos, "EEPROM not initialzed\n"); + } + + return pos; +} + +static DEVICE_ATTR(version, S_IWUSR | S_IRUGO, show_version, NULL); + +static ssize_t show_temperature(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + return sprintf(buf, "%d\n", priv->temperature); +} + +static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); + +static ssize_t show_tx_power(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + return sprintf(buf, "%d\n", priv->tx_power_user_lmt); +} + +static ssize_t store_tx_power(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + char *p = (char *)buf; + u32 val; + + val = simple_strtoul(p, &p, 10); + if (p == buf) + printk(KERN_INFO DRV_NAME + ": %s is not in decimal form.\n", buf); + else + iwl_set_tx_power(priv, val, false); + + return count; +} + +static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power); + +static ssize_t show_flags(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + + return sprintf(buf, "0x%04X\n", priv->active_rxon.flags); +} + +static ssize_t store_flags(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + u32 flags = simple_strtoul(buf, NULL, 0); + + mutex_lock(&priv->mutex); + if (le32_to_cpu(priv->staging_rxon.flags) != flags) { + /* Cancel any currently running scans... */ + if (iwl_scan_cancel_timeout(priv, 100)) + IWL_WARNING("Could not cancel scan.\n"); + else { + IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n", + flags); + priv->staging_rxon.flags = cpu_to_le32(flags); + iwl4965_commit_rxon(priv); + } + } + mutex_unlock(&priv->mutex); + + return count; +} + +static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags); + +static ssize_t show_filter_flags(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + + return sprintf(buf, "0x%04X\n", + le32_to_cpu(priv->active_rxon.filter_flags)); +} + +static ssize_t store_filter_flags(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + u32 filter_flags = simple_strtoul(buf, NULL, 0); + + mutex_lock(&priv->mutex); + if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) { + /* Cancel any currently running scans... */ + if (iwl_scan_cancel_timeout(priv, 100)) + IWL_WARNING("Could not cancel scan.\n"); + else { + IWL_DEBUG_INFO("Committing rxon.filter_flags = " + "0x%04X\n", filter_flags); + priv->staging_rxon.filter_flags = + cpu_to_le32(filter_flags); + iwl4965_commit_rxon(priv); + } + } + mutex_unlock(&priv->mutex); + + return count; +} + +static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags, + store_filter_flags); + +#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT + +static ssize_t show_measurement(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + struct iwl4965_spectrum_notification measure_report; + u32 size = sizeof(measure_report), len = 0, ofs = 0; + u8 *data = (u8 *) & measure_report; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (!(priv->measurement_status & MEASUREMENT_READY)) { + spin_unlock_irqrestore(&priv->lock, flags); + return 0; + } + memcpy(&measure_report, &priv->measure_report, size); + priv->measurement_status = 0; + spin_unlock_irqrestore(&priv->lock, flags); + + while (size && (PAGE_SIZE - len)) { + hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len, + PAGE_SIZE - len, 1); + len = strlen(buf); + if (PAGE_SIZE - len) + buf[len++] = '\n'; + + ofs += 16; + size -= min(size, 16U); + } + + return len; +} + +static ssize_t store_measurement(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + struct ieee80211_measurement_params params = { + .channel = le16_to_cpu(priv->active_rxon.channel), + .start_time = cpu_to_le64(priv->last_tsf), + .duration = cpu_to_le16(1), + }; + u8 type = IWL_MEASURE_BASIC; + u8 buffer[32]; + u8 channel; + + if (count) { + char *p = buffer; + strncpy(buffer, buf, min(sizeof(buffer), count)); + channel = simple_strtoul(p, NULL, 0); + if (channel) + params.channel = channel; + + p = buffer; + while (*p && *p != ' ') + p++; + if (*p) + type = simple_strtoul(p + 1, NULL, 0); + } + + IWL_DEBUG_INFO("Invoking measurement of type %d on " + "channel %d (for '%s')\n", type, params.channel, buf); + iwl4965_get_measurement(priv, ¶ms, type); + + return count; +} + +static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR, + show_measurement, store_measurement); +#endif /* CONFIG_IWL4965_SPECTRUM_MEASUREMENT */ + +static ssize_t store_retry_rate(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + + priv->retry_rate = simple_strtoul(buf, NULL, 0); + if (priv->retry_rate <= 0) + priv->retry_rate = 1; + + return count; +} + +static ssize_t show_retry_rate(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + return sprintf(buf, "%d", priv->retry_rate); +} + +static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate, + store_retry_rate); + +static ssize_t store_power_level(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + int ret; + int mode; + + mode = simple_strtoul(buf, NULL, 0); + mutex_lock(&priv->mutex); + + if (!iwl_is_ready(priv)) { + ret = -EAGAIN; + goto out; + } + + ret = iwl_power_set_user_mode(priv, mode); + if (ret) { + IWL_DEBUG_MAC80211("failed setting power mode.\n"); + goto out; + } + ret = count; + + out: + mutex_unlock(&priv->mutex); + return ret; +} + +static ssize_t show_power_level(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + int mode = priv->power_data.user_power_setting; + int system = priv->power_data.system_power_setting; + int level = priv->power_data.power_mode; + char *p = buf; + + switch (system) { + case IWL_POWER_SYS_AUTO: + p += sprintf(p, "SYSTEM:auto"); + break; + case IWL_POWER_SYS_AC: + p += sprintf(p, "SYSTEM:ac"); + break; + case IWL_POWER_SYS_BATTERY: + p += sprintf(p, "SYSTEM:battery"); + break; + } + + p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO)?"fixed":"auto"); + p += sprintf(p, "\tINDEX:%d", level); + p += sprintf(p, "\n"); + return (p - buf + 1); +} + +static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level, + store_power_level); + +static ssize_t show_channels(struct device *d, + struct device_attribute *attr, char *buf) +{ + + struct iwl_priv *priv = dev_get_drvdata(d); + struct ieee80211_channel *channels = NULL; + const struct ieee80211_supported_band *supp_band = NULL; + int len = 0, i; + int count = 0; + + if (!test_bit(STATUS_GEO_CONFIGURED, &priv->status)) + return -EAGAIN; + + supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_2GHZ); + channels = supp_band->channels; + count = supp_band->n_channels; + + len += sprintf(&buf[len], + "Displaying %d channels in 2.4GHz band " + "(802.11bg):\n", count); + + for (i = 0; i < count; i++) + len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n", + ieee80211_frequency_to_channel( + channels[i].center_freq), + channels[i].max_power, + channels[i].flags & IEEE80211_CHAN_RADAR ? + " (IEEE 802.11h required)" : "", + (!(channels[i].flags & IEEE80211_CHAN_NO_IBSS) + || (channels[i].flags & + IEEE80211_CHAN_RADAR)) ? "" : + ", IBSS", + channels[i].flags & + IEEE80211_CHAN_PASSIVE_SCAN ? + "passive only" : "active/passive"); + + supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_5GHZ); + channels = supp_band->channels; + count = supp_band->n_channels; + + len += sprintf(&buf[len], "Displaying %d channels in 5.2GHz band " + "(802.11a):\n", count); + + for (i = 0; i < count; i++) + len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n", + ieee80211_frequency_to_channel( + channels[i].center_freq), + channels[i].max_power, + channels[i].flags & IEEE80211_CHAN_RADAR ? + " (IEEE 802.11h required)" : "", + ((channels[i].flags & IEEE80211_CHAN_NO_IBSS) + || (channels[i].flags & + IEEE80211_CHAN_RADAR)) ? "" : + ", IBSS", + channels[i].flags & + IEEE80211_CHAN_PASSIVE_SCAN ? + "passive only" : "active/passive"); + + return len; +} + +static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL); + +static ssize_t show_statistics(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + u32 size = sizeof(struct iwl_notif_statistics); + u32 len = 0, ofs = 0; + u8 *data = (u8 *) & priv->statistics; + int rc = 0; + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + mutex_lock(&priv->mutex); + rc = iwl_send_statistics_request(priv, 0); + mutex_unlock(&priv->mutex); + + if (rc) { + len = sprintf(buf, + "Error sending statistics request: 0x%08X\n", rc); + return len; + } + + while (size && (PAGE_SIZE - len)) { + hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len, + PAGE_SIZE - len, 1); + len = strlen(buf); + if (PAGE_SIZE - len) + buf[len++] = '\n'; + + ofs += 16; + size -= min(size, 16U); + } + + return len; +} + +static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL); + +static ssize_t show_status(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + if (!iwl_is_alive(priv)) + return -EAGAIN; + return sprintf(buf, "0x%08x\n", (int)priv->status); +} + +static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); + +/***************************************************************************** + * + * driver setup and teardown + * + *****************************************************************************/ + +static void iwl_setup_deferred_work(struct iwl_priv *priv) +{ + priv->workqueue = create_workqueue(DRV_NAME); + + init_waitqueue_head(&priv->wait_command_queue); + + INIT_WORK(&priv->up, iwl4965_bg_up); + INIT_WORK(&priv->restart, iwl4965_bg_restart); + INIT_WORK(&priv->rx_replenish, iwl4965_bg_rx_replenish); + INIT_WORK(&priv->rf_kill, iwl4965_bg_rf_kill); + INIT_WORK(&priv->beacon_update, iwl4965_bg_beacon_update); + INIT_WORK(&priv->set_monitor, iwl4965_bg_set_monitor); + INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work); + INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start); + INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start); + + /* FIXME : remove when resolved PENDING */ + INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); + iwl_setup_scan_deferred_work(priv); + + if (priv->cfg->ops->lib->setup_deferred_work) + priv->cfg->ops->lib->setup_deferred_work(priv); + + init_timer(&priv->statistics_periodic); + priv->statistics_periodic.data = (unsigned long)priv; + priv->statistics_periodic.function = iwl4965_bg_statistics_periodic; + + tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) + iwl4965_irq_tasklet, (unsigned long)priv); +} + +static void iwl_cancel_deferred_work(struct iwl_priv *priv) +{ + if (priv->cfg->ops->lib->cancel_deferred_work) + priv->cfg->ops->lib->cancel_deferred_work(priv); + + cancel_delayed_work_sync(&priv->init_alive_start); + cancel_delayed_work(&priv->scan_check); + cancel_delayed_work(&priv->alive_start); + cancel_work_sync(&priv->beacon_update); + del_timer_sync(&priv->statistics_periodic); +} + +static struct attribute *iwl4965_sysfs_entries[] = { + &dev_attr_channels.attr, + &dev_attr_flags.attr, + &dev_attr_filter_flags.attr, +#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT + &dev_attr_measurement.attr, +#endif + &dev_attr_power_level.attr, + &dev_attr_retry_rate.attr, + &dev_attr_statistics.attr, + &dev_attr_status.attr, + &dev_attr_temperature.attr, + &dev_attr_tx_power.attr, +#ifdef CONFIG_IWLWIFI_DEBUG + &dev_attr_debug_level.attr, +#endif + &dev_attr_version.attr, + + NULL +}; + +static struct attribute_group iwl4965_attribute_group = { + .name = NULL, /* put in device directory */ + .attrs = iwl4965_sysfs_entries, +}; + +static struct ieee80211_ops iwl4965_hw_ops = { + .tx = iwl4965_mac_tx, + .start = iwl4965_mac_start, + .stop = iwl4965_mac_stop, + .add_interface = iwl4965_mac_add_interface, + .remove_interface = iwl4965_mac_remove_interface, + .config = iwl4965_mac_config, + .config_interface = iwl4965_mac_config_interface, + .configure_filter = iwl4965_configure_filter, + .set_key = iwl4965_mac_set_key, + .update_tkip_key = iwl4965_mac_update_tkip_key, + .get_stats = iwl4965_mac_get_stats, + .get_tx_stats = iwl4965_mac_get_tx_stats, + .conf_tx = iwl4965_mac_conf_tx, + .reset_tsf = iwl4965_mac_reset_tsf, + .bss_info_changed = iwl4965_bss_info_changed, + .ampdu_action = iwl4965_mac_ampdu_action, + .hw_scan = iwl4965_mac_hw_scan +}; + +static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int err = 0; + struct iwl_priv *priv; + struct ieee80211_hw *hw; + struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data); + unsigned long flags; + DECLARE_MAC_BUF(mac); + + /************************ + * 1. Allocating HW data + ************************/ + + /* Disabling hardware scan means that mac80211 will perform scans + * "the hard way", rather than using device's scan. */ + if (cfg->mod_params->disable_hw_scan) { + if (cfg->mod_params->debug & IWL_DL_INFO) + dev_printk(KERN_DEBUG, &(pdev->dev), + "Disabling hw_scan\n"); + iwl4965_hw_ops.hw_scan = NULL; + } + + hw = iwl_alloc_all(cfg, &iwl4965_hw_ops); + if (!hw) { + err = -ENOMEM; + goto out; + } + priv = hw->priv; + /* At this point both hw and priv are allocated. */ + + SET_IEEE80211_DEV(hw, &pdev->dev); + + IWL_DEBUG_INFO("*** LOAD DRIVER ***\n"); + priv->cfg = cfg; + priv->pci_dev = pdev; + +#ifdef CONFIG_IWLWIFI_DEBUG + priv->debug_level = priv->cfg->mod_params->debug; + atomic_set(&priv->restrict_refcnt, 0); +#endif + + /************************** + * 2. Initializing PCI bus + **************************/ + if (pci_enable_device(pdev)) { + err = -ENODEV; + goto out_ieee80211_free_hw; + } + + pci_set_master(pdev); + + err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (err) { + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + /* both attempts failed: */ + if (err) { + printk(KERN_WARNING "%s: No suitable DMA available.\n", + DRV_NAME); + goto out_pci_disable_device; + } + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) + goto out_pci_disable_device; + + pci_set_drvdata(pdev, priv); + + /* We disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state */ + pci_write_config_byte(pdev, 0x41, 0x00); + + /*********************** + * 3. Read REV register + ***********************/ + priv->hw_base = pci_iomap(pdev, 0, 0); + if (!priv->hw_base) { + err = -ENODEV; + goto out_pci_release_regions; + } + + IWL_DEBUG_INFO("pci_resource_len = 0x%08llx\n", + (unsigned long long) pci_resource_len(pdev, 0)); + IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base); + + iwl_hw_detect(priv); + printk(KERN_INFO DRV_NAME + ": Detected Intel Wireless WiFi Link %s REV=0x%X\n", + priv->cfg->name, priv->hw_rev); + + /* amp init */ + err = priv->cfg->ops->lib->apm_ops.init(priv); + if (err < 0) { + IWL_DEBUG_INFO("Failed to init APMG\n"); + goto out_iounmap; + } + /***************** + * 4. Read EEPROM + *****************/ + /* Read the EEPROM */ + err = iwl_eeprom_init(priv); + if (err) { + IWL_ERROR("Unable to init EEPROM\n"); + goto out_iounmap; + } + err = iwl_eeprom_check_version(priv); + if (err) + goto out_iounmap; + + /* extract MAC Address */ + iwl_eeprom_get_mac(priv, priv->mac_addr); + IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr)); + SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); + + /************************ + * 5. Setup HW constants + ************************/ + if (iwl_set_hw_params(priv)) { + IWL_ERROR("failed to set hw parameters\n"); + goto out_free_eeprom; + } + + /******************* + * 6. Setup priv + *******************/ + + err = iwl_init_drv(priv); + if (err) + goto out_free_eeprom; + /* At this point both hw and priv are initialized. */ + + /********************************** + * 7. Initialize module parameters + **********************************/ + + /* Disable radio (SW RF KILL) via parameter when loading driver */ + if (priv->cfg->mod_params->disable) { + set_bit(STATUS_RF_KILL_SW, &priv->status); + IWL_DEBUG_INFO("Radio disabled.\n"); + } + + /******************** + * 8. Setup services + ********************/ + spin_lock_irqsave(&priv->lock, flags); + iwl4965_disable_interrupts(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + err = sysfs_create_group(&pdev->dev.kobj, &iwl4965_attribute_group); + if (err) { + IWL_ERROR("failed to create sysfs device attributes\n"); + goto out_uninit_drv; + } + + + iwl_setup_deferred_work(priv); + iwl_setup_rx_handlers(priv); + + /******************** + * 9. Conclude + ********************/ + pci_save_state(pdev); + pci_disable_device(pdev); + + /********************************** + * 10. Setup and register mac80211 + **********************************/ + + err = iwl_setup_mac(priv); + if (err) + goto out_remove_sysfs; + + err = iwl_dbgfs_register(priv, DRV_NAME); + if (err) + IWL_ERROR("failed to create debugfs files\n"); + + err = iwl_rfkill_init(priv); + if (err) + IWL_ERROR("Unable to initialize RFKILL system. " + "Ignoring error: %d\n", err); + iwl_power_initialize(priv); + return 0; + + out_remove_sysfs: + sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group); + out_uninit_drv: + iwl_uninit_drv(priv); + out_free_eeprom: + iwl_eeprom_free(priv); + out_iounmap: + pci_iounmap(pdev, priv->hw_base); + out_pci_release_regions: + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + out_pci_disable_device: + pci_disable_device(pdev); + out_ieee80211_free_hw: + ieee80211_free_hw(priv->hw); + out: + return err; +} + +static void __devexit iwl4965_pci_remove(struct pci_dev *pdev) +{ + struct iwl_priv *priv = pci_get_drvdata(pdev); + unsigned long flags; + + if (!priv) + return; + + IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n"); + + iwl_dbgfs_unregister(priv); + sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group); + + if (priv->mac80211_registered) { + ieee80211_unregister_hw(priv->hw); + priv->mac80211_registered = 0; + } + + set_bit(STATUS_EXIT_PENDING, &priv->status); + + iwl4965_down(priv); + + /* make sure we flush any pending irq or + * tasklet for the driver + */ + spin_lock_irqsave(&priv->lock, flags); + iwl4965_disable_interrupts(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + iwl_synchronize_irq(priv); + + iwl_rfkill_unregister(priv); + iwl4965_dealloc_ucode_pci(priv); + + if (priv->rxq.bd) + iwl_rx_queue_free(priv, &priv->rxq); + iwl_hw_txq_ctx_free(priv); + + iwl_clear_stations_table(priv); + iwl_eeprom_free(priv); + + + /*netif_stop_queue(dev); */ + flush_workqueue(priv->workqueue); + + /* ieee80211_unregister_hw calls iwl4965_mac_stop, which flushes + * priv->workqueue... so we can't take down the workqueue + * until now... */ + destroy_workqueue(priv->workqueue); + priv->workqueue = NULL; + + pci_iounmap(pdev, priv->hw_base); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + + iwl_uninit_drv(priv); + + if (priv->ibss_beacon) + dev_kfree_skb(priv->ibss_beacon); + + ieee80211_free_hw(priv->hw); +} + +#ifdef CONFIG_PM + +static int iwl4965_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct iwl_priv *priv = pci_get_drvdata(pdev); + + if (priv->is_open) { + set_bit(STATUS_IN_SUSPEND, &priv->status); + iwl4965_mac_stop(priv->hw); + priv->is_open = 1; + } + + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +static int iwl4965_pci_resume(struct pci_dev *pdev) +{ + struct iwl_priv *priv = pci_get_drvdata(pdev); + + pci_set_power_state(pdev, PCI_D0); + + if (priv->is_open) + iwl4965_mac_start(priv->hw); + + clear_bit(STATUS_IN_SUSPEND, &priv->status); + return 0; +} + +#endif /* CONFIG_PM */ + +/***************************************************************************** + * + * driver and module entry point + * + *****************************************************************************/ + +/* Hardware specific file defines the PCI IDs table for that hardware module */ +static struct pci_device_id iwl_hw_card_ids[] = { + {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)}, + {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)}, +#ifdef CONFIG_IWL5000 + {IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bg_cfg)}, + {IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bg_cfg)}, + {IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)}, + {IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)}, + {IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)}, + {IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)}, + {IWL_PCI_DEVICE(0x4232, PCI_ANY_ID, iwl5100_agn_cfg)}, + {IWL_PCI_DEVICE(0x4235, PCI_ANY_ID, iwl5300_agn_cfg)}, + {IWL_PCI_DEVICE(0x4236, PCI_ANY_ID, iwl5300_agn_cfg)}, + {IWL_PCI_DEVICE(0x4237, PCI_ANY_ID, iwl5100_agn_cfg)}, + {IWL_PCI_DEVICE(0x423A, PCI_ANY_ID, iwl5350_agn_cfg)}, +#endif /* CONFIG_IWL5000 */ + {0} +}; +MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids); + +static struct pci_driver iwl_driver = { + .name = DRV_NAME, + .id_table = iwl_hw_card_ids, + .probe = iwl4965_pci_probe, + .remove = __devexit_p(iwl4965_pci_remove), +#ifdef CONFIG_PM + .suspend = iwl4965_pci_suspend, + .resume = iwl4965_pci_resume, +#endif +}; + +static int __init iwl4965_init(void) +{ + + int ret; + printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n"); + printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n"); + + ret = iwlagn_rate_control_register(); + if (ret) { + IWL_ERROR("Unable to register rate control algorithm: %d\n", ret); + return ret; + } + + ret = pci_register_driver(&iwl_driver); + if (ret) { + IWL_ERROR("Unable to initialize PCI module\n"); + goto error_register; + } + + return ret; + +error_register: + iwlagn_rate_control_unregister(); + return ret; +} + +static void __exit iwl4965_exit(void) +{ + pci_unregister_driver(&iwl_driver); + iwlagn_rate_control_unregister(); +} + +module_exit(iwl4965_exit); +module_init(iwl4965_init); diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c deleted file mode 100644 index f71b3f3f81ba..000000000000 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ /dev/null @@ -1,4523 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * James P. Ketrenos - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-helpers.h" -#include "iwl-sta.h" -#include "iwl-calib.h" - - -/****************************************************************************** - * - * module boiler plate - * - ******************************************************************************/ - -/* - * module name, copyright, version, etc. - * NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk - */ - -#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux" - -#ifdef CONFIG_IWLWIFI_DEBUG -#define VD "d" -#else -#define VD -#endif - -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT -#define VS "s" -#else -#define VS -#endif - -#define DRV_VERSION IWLWIFI_VERSION VD VS - - -MODULE_DESCRIPTION(DRV_DESCRIPTION); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR(DRV_COPYRIGHT); -MODULE_LICENSE("GPL"); - -/*************** STATION TABLE MANAGEMENT **** - * mac80211 should be examined to determine if sta_info is duplicating - * the functionality provided here - */ - -/**************************************************************/ - - - -static void iwl4965_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt) -{ - struct iwl_rxon_cmd *rxon = &priv->staging_rxon; - - if (hw_decrypt) - rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK; - else - rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK; - -} - -/** - * iwl4965_check_rxon_cmd - validate RXON structure is valid - * - * NOTE: This is really only useful during development and can eventually - * be #ifdef'd out once the driver is stable and folks aren't actively - * making changes - */ -static int iwl4965_check_rxon_cmd(struct iwl_rxon_cmd *rxon) -{ - int error = 0; - int counter = 1; - - if (rxon->flags & RXON_FLG_BAND_24G_MSK) { - error |= le32_to_cpu(rxon->flags & - (RXON_FLG_TGJ_NARROW_BAND_MSK | - RXON_FLG_RADAR_DETECT_MSK)); - if (error) - IWL_WARNING("check 24G fields %d | %d\n", - counter++, error); - } else { - error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ? - 0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK); - if (error) - IWL_WARNING("check 52 fields %d | %d\n", - counter++, error); - error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK); - if (error) - IWL_WARNING("check 52 CCK %d | %d\n", - counter++, error); - } - error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1; - if (error) - IWL_WARNING("check mac addr %d | %d\n", counter++, error); - - /* make sure basic rates 6Mbps and 1Mbps are supported */ - error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) && - ((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0)); - if (error) - IWL_WARNING("check basic rate %d | %d\n", counter++, error); - - error |= (le16_to_cpu(rxon->assoc_id) > 2007); - if (error) - IWL_WARNING("check assoc id %d | %d\n", counter++, error); - - error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) - == (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)); - if (error) - IWL_WARNING("check CCK and short slot %d | %d\n", - counter++, error); - - error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) - == (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)); - if (error) - IWL_WARNING("check CCK & auto detect %d | %d\n", - counter++, error); - - error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK | - RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK); - if (error) - IWL_WARNING("check TGG and auto detect %d | %d\n", - counter++, error); - - if (error) - IWL_WARNING("Tuning to channel %d\n", - le16_to_cpu(rxon->channel)); - - if (error) { - IWL_ERROR("Not a valid iwl4965_rxon_assoc_cmd field values\n"); - return -1; - } - return 0; -} - -/** - * iwl4965_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed - * @priv: staging_rxon is compared to active_rxon - * - * If the RXON structure is changing enough to require a new tune, - * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that - * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. - */ -static int iwl4965_full_rxon_required(struct iwl_priv *priv) -{ - - /* These items are only settable from the full RXON command */ - if (!(iwl_is_associated(priv)) || - compare_ether_addr(priv->staging_rxon.bssid_addr, - priv->active_rxon.bssid_addr) || - compare_ether_addr(priv->staging_rxon.node_addr, - priv->active_rxon.node_addr) || - compare_ether_addr(priv->staging_rxon.wlap_bssid_addr, - priv->active_rxon.wlap_bssid_addr) || - (priv->staging_rxon.dev_type != priv->active_rxon.dev_type) || - (priv->staging_rxon.channel != priv->active_rxon.channel) || - (priv->staging_rxon.air_propagation != - priv->active_rxon.air_propagation) || - (priv->staging_rxon.ofdm_ht_single_stream_basic_rates != - priv->active_rxon.ofdm_ht_single_stream_basic_rates) || - (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates != - priv->active_rxon.ofdm_ht_dual_stream_basic_rates) || - (priv->staging_rxon.rx_chain != priv->active_rxon.rx_chain) || - (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id)) - return 1; - - /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can - * be updated with the RXON_ASSOC command -- however only some - * flag transitions are allowed using RXON_ASSOC */ - - /* Check if we are not switching bands */ - if ((priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) != - (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)) - return 1; - - /* Check if we are switching association toggle */ - if ((priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) != - (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK)) - return 1; - - return 0; -} - -/** - * iwl4965_commit_rxon - commit staging_rxon to hardware - * - * The RXON command in staging_rxon is committed to the hardware and - * the active_rxon structure is updated with the new data. This - * function correctly transitions out of the RXON_ASSOC_MSK state if - * a HW tune is required based on the RXON structure changes. - */ -static int iwl4965_commit_rxon(struct iwl_priv *priv) -{ - /* cast away the const for active_rxon in this function */ - struct iwl_rxon_cmd *active_rxon = (void *)&priv->active_rxon; - DECLARE_MAC_BUF(mac); - int ret; - bool new_assoc = - !!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK); - - if (!iwl_is_alive(priv)) - return -EBUSY; - - /* always get timestamp with Rx frame */ - priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK; - /* allow CTS-to-self if possible. this is relevant only for - * 5000, but will not damage 4965 */ - priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN; - - ret = iwl4965_check_rxon_cmd(&priv->staging_rxon); - if (ret) { - IWL_ERROR("Invalid RXON configuration. Not committing.\n"); - return -EINVAL; - } - - /* If we don't need to send a full RXON, we can use - * iwl4965_rxon_assoc_cmd which is used to reconfigure filter - * and other flags for the current radio configuration. */ - if (!iwl4965_full_rxon_required(priv)) { - ret = iwl_send_rxon_assoc(priv); - if (ret) { - IWL_ERROR("Error setting RXON_ASSOC (%d)\n", ret); - return ret; - } - - memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); - return 0; - } - - /* station table will be cleared */ - priv->assoc_station_added = 0; - - /* If we are currently associated and the new config requires - * an RXON_ASSOC and the new config wants the associated mask enabled, - * we must clear the associated from the active configuration - * before we apply the new config */ - if (iwl_is_associated(priv) && new_assoc) { - IWL_DEBUG_INFO("Toggling associated bit on current RXON\n"); - active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - - ret = iwl_send_cmd_pdu(priv, REPLY_RXON, - sizeof(struct iwl_rxon_cmd), - &priv->active_rxon); - - /* If the mask clearing failed then we set - * active_rxon back to what it was previously */ - if (ret) { - active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; - IWL_ERROR("Error clearing ASSOC_MSK (%d)\n", ret); - return ret; - } - } - - IWL_DEBUG_INFO("Sending RXON\n" - "* with%s RXON_FILTER_ASSOC_MSK\n" - "* channel = %d\n" - "* bssid = %s\n", - (new_assoc ? "" : "out"), - le16_to_cpu(priv->staging_rxon.channel), - print_mac(mac, priv->staging_rxon.bssid_addr)); - - iwl4965_set_rxon_hwcrypto(priv, !priv->hw_params.sw_crypto); - - /* Apply the new configuration - * RXON unassoc clears the station table in uCode, send it before - * we add the bcast station. If assoc bit is set, we will send RXON - * after having added the bcast and bssid station. - */ - if (!new_assoc) { - ret = iwl_send_cmd_pdu(priv, REPLY_RXON, - sizeof(struct iwl_rxon_cmd), &priv->staging_rxon); - if (ret) { - IWL_ERROR("Error setting new RXON (%d)\n", ret); - return ret; - } - memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); - } - - iwl_clear_stations_table(priv); - - if (!priv->error_recovering) - priv->start_calib = 0; - - /* Add the broadcast address so we can send broadcast frames */ - if (iwl_rxon_add_station(priv, iwl_bcast_addr, 0) == - IWL_INVALID_STATION) { - IWL_ERROR("Error adding BROADCAST address for transmit.\n"); - return -EIO; - } - - /* If we have set the ASSOC_MSK and we are in BSS mode then - * add the IWL_AP_ID to the station rate table */ - if (new_assoc) { - if (priv->iw_mode == IEEE80211_IF_TYPE_STA) { - ret = iwl_rxon_add_station(priv, - priv->active_rxon.bssid_addr, 1); - if (ret == IWL_INVALID_STATION) { - IWL_ERROR("Error adding AP address for TX.\n"); - return -EIO; - } - priv->assoc_station_added = 1; - if (priv->default_wep_key && - iwl_send_static_wepkey_cmd(priv, 0)) - IWL_ERROR("Could not send WEP static key.\n"); - } - - /* Apply the new configuration - * RXON assoc doesn't clear the station table in uCode, - */ - ret = iwl_send_cmd_pdu(priv, REPLY_RXON, - sizeof(struct iwl_rxon_cmd), &priv->staging_rxon); - if (ret) { - IWL_ERROR("Error setting new RXON (%d)\n", ret); - return ret; - } - memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); - } - - iwl_init_sensitivity(priv); - - /* If we issue a new RXON command which required a tune then we must - * send a new TXPOWER command or we won't be able to Tx any frames */ - ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true); - if (ret) { - IWL_ERROR("Error sending TX power (%d)\n", ret); - return ret; - } - - return 0; -} - -void iwl4965_update_chain_flags(struct iwl_priv *priv) -{ - - iwl_set_rxon_chain(priv); - iwl4965_commit_rxon(priv); -} - -static int iwl4965_send_bt_config(struct iwl_priv *priv) -{ - struct iwl4965_bt_cmd bt_cmd = { - .flags = 3, - .lead_time = 0xAA, - .max_kill = 1, - .kill_ack_mask = 0, - .kill_cts_mask = 0, - }; - - return iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, - sizeof(struct iwl4965_bt_cmd), &bt_cmd); -} - -static void iwl_clear_free_frames(struct iwl_priv *priv) -{ - struct list_head *element; - - IWL_DEBUG_INFO("%d frames on pre-allocated heap on clear.\n", - priv->frames_count); - - while (!list_empty(&priv->free_frames)) { - element = priv->free_frames.next; - list_del(element); - kfree(list_entry(element, struct iwl_frame, list)); - priv->frames_count--; - } - - if (priv->frames_count) { - IWL_WARNING("%d frames still in use. Did we lose one?\n", - priv->frames_count); - priv->frames_count = 0; - } -} - -static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv) -{ - struct iwl_frame *frame; - struct list_head *element; - if (list_empty(&priv->free_frames)) { - frame = kzalloc(sizeof(*frame), GFP_KERNEL); - if (!frame) { - IWL_ERROR("Could not allocate frame!\n"); - return NULL; - } - - priv->frames_count++; - return frame; - } - - element = priv->free_frames.next; - list_del(element); - return list_entry(element, struct iwl_frame, list); -} - -static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame) -{ - memset(frame, 0, sizeof(*frame)); - list_add(&frame->list, &priv->free_frames); -} - -static unsigned int iwl_fill_beacon_frame(struct iwl_priv *priv, - struct ieee80211_hdr *hdr, - const u8 *dest, int left) -{ - if (!iwl_is_associated(priv) || !priv->ibss_beacon || - ((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) && - (priv->iw_mode != IEEE80211_IF_TYPE_AP))) - return 0; - - if (priv->ibss_beacon->len > left) - return 0; - - memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len); - - return priv->ibss_beacon->len; -} - -static u8 iwl4965_rate_get_lowest_plcp(struct iwl_priv *priv) -{ - int i; - int rate_mask; - - /* Set rate mask*/ - if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) - rate_mask = priv->active_rate_basic & 0xF; - else - rate_mask = priv->active_rate_basic & 0xFF0; - - /* Find lowest valid rate */ - for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID; - i = iwl_rates[i].next_ieee) { - if (rate_mask & (1 << i)) - return iwl_rates[i].plcp; - } - - /* No valid rate was found. Assign the lowest one */ - if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) - return IWL_RATE_1M_PLCP; - else - return IWL_RATE_6M_PLCP; -} - -unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, - struct iwl_frame *frame, u8 rate) -{ - struct iwl_tx_beacon_cmd *tx_beacon_cmd; - unsigned int frame_size; - - tx_beacon_cmd = &frame->u.beacon; - memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); - - tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id; - tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame, - iwl_bcast_addr, - sizeof(frame->u) - sizeof(*tx_beacon_cmd)); - - BUG_ON(frame_size > MAX_MPDU_SIZE); - tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); - - if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP)) - tx_beacon_cmd->tx.rate_n_flags = - iwl_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK); - else - tx_beacon_cmd->tx.rate_n_flags = - iwl_hw_set_rate_n_flags(rate, 0); - - tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK | - TX_CMD_FLG_TSF_MSK | - TX_CMD_FLG_STA_RATE_MSK; - - return sizeof(*tx_beacon_cmd) + frame_size; -} -static int iwl4965_send_beacon_cmd(struct iwl_priv *priv) -{ - struct iwl_frame *frame; - unsigned int frame_size; - int rc; - u8 rate; - - frame = iwl_get_free_frame(priv); - - if (!frame) { - IWL_ERROR("Could not obtain free frame buffer for beacon " - "command.\n"); - return -ENOMEM; - } - - rate = iwl4965_rate_get_lowest_plcp(priv); - - frame_size = iwl4965_hw_get_beacon_cmd(priv, frame, rate); - - rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size, - &frame->u.cmd[0]); - - iwl_free_frame(priv, frame); - - return rc; -} - -/****************************************************************************** - * - * Misc. internal state and helper functions - * - ******************************************************************************/ - -static void iwl4965_ht_conf(struct iwl_priv *priv, - struct ieee80211_bss_conf *bss_conf) -{ - struct ieee80211_ht_info *ht_conf = bss_conf->ht_conf; - struct ieee80211_ht_bss_info *ht_bss_conf = bss_conf->ht_bss_conf; - struct iwl_ht_info *iwl_conf = &priv->current_ht_config; - - IWL_DEBUG_MAC80211("enter: \n"); - - iwl_conf->is_ht = bss_conf->assoc_ht; - - if (!iwl_conf->is_ht) - return; - - priv->ps_mode = (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); - - if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20) - iwl_conf->sgf |= HT_SHORT_GI_20MHZ; - if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40) - iwl_conf->sgf |= HT_SHORT_GI_40MHZ; - - iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD); - iwl_conf->max_amsdu_size = - !!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU); - - iwl_conf->supported_chan_width = - !!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH); - iwl_conf->extension_chan_offset = - ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_SEC_OFFSET; - /* If no above or below channel supplied disable FAT channel */ - if (iwl_conf->extension_chan_offset != IEEE80211_HT_IE_CHA_SEC_ABOVE && - iwl_conf->extension_chan_offset != IEEE80211_HT_IE_CHA_SEC_BELOW) { - iwl_conf->extension_chan_offset = IEEE80211_HT_IE_CHA_SEC_NONE; - iwl_conf->supported_chan_width = 0; - } - - iwl_conf->tx_mimo_ps_mode = - (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); - memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16); - - iwl_conf->control_channel = ht_bss_conf->primary_channel; - iwl_conf->tx_chan_width = - !!(ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_WIDTH); - iwl_conf->ht_protection = - ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_HT_PROTECTION; - iwl_conf->non_GF_STA_present = - !!(ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_NON_GF_STA_PRSNT); - - IWL_DEBUG_MAC80211("control channel %d\n", iwl_conf->control_channel); - IWL_DEBUG_MAC80211("leave\n"); -} - -/* - * QoS support -*/ -static void iwl_activate_qos(struct iwl_priv *priv, u8 force) -{ - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (!priv->qos_data.qos_enable) - return; - - priv->qos_data.def_qos_parm.qos_flags = 0; - - if (priv->qos_data.qos_cap.q_AP.queue_request && - !priv->qos_data.qos_cap.q_AP.txop_request) - priv->qos_data.def_qos_parm.qos_flags |= - QOS_PARAM_FLG_TXOP_TYPE_MSK; - if (priv->qos_data.qos_active) - priv->qos_data.def_qos_parm.qos_flags |= - QOS_PARAM_FLG_UPDATE_EDCA_MSK; - - if (priv->current_ht_config.is_ht) - priv->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK; - - if (force || iwl_is_associated(priv)) { - IWL_DEBUG_QOS("send QoS cmd with Qos active=%d FLAGS=0x%X\n", - priv->qos_data.qos_active, - priv->qos_data.def_qos_parm.qos_flags); - - iwl_send_cmd_pdu_async(priv, REPLY_QOS_PARAM, - sizeof(struct iwl_qosparam_cmd), - &priv->qos_data.def_qos_parm, NULL); - } -} - -#define MAX_UCODE_BEACON_INTERVAL 4096 - -static __le16 iwl4965_adjust_beacon_interval(u16 beacon_val) -{ - u16 new_val = 0; - u16 beacon_factor = 0; - - beacon_factor = - (beacon_val + MAX_UCODE_BEACON_INTERVAL) - / MAX_UCODE_BEACON_INTERVAL; - new_val = beacon_val / beacon_factor; - - return cpu_to_le16(new_val); -} - -static void iwl4965_setup_rxon_timing(struct iwl_priv *priv) -{ - u64 interval_tm_unit; - u64 tsf, result; - unsigned long flags; - struct ieee80211_conf *conf = NULL; - u16 beacon_int = 0; - - conf = ieee80211_get_hw_conf(priv->hw); - - spin_lock_irqsave(&priv->lock, flags); - priv->rxon_timing.timestamp.dw[1] = cpu_to_le32(priv->timestamp >> 32); - priv->rxon_timing.timestamp.dw[0] = - cpu_to_le32(priv->timestamp & 0xFFFFFFFF); - - priv->rxon_timing.listen_interval = cpu_to_le16(conf->listen_interval); - - tsf = priv->timestamp; - - beacon_int = priv->beacon_int; - spin_unlock_irqrestore(&priv->lock, flags); - - if (priv->iw_mode == IEEE80211_IF_TYPE_STA) { - if (beacon_int == 0) { - priv->rxon_timing.beacon_interval = cpu_to_le16(100); - priv->rxon_timing.beacon_init_val = cpu_to_le32(102400); - } else { - priv->rxon_timing.beacon_interval = - cpu_to_le16(beacon_int); - priv->rxon_timing.beacon_interval = - iwl4965_adjust_beacon_interval( - le16_to_cpu(priv->rxon_timing.beacon_interval)); - } - - priv->rxon_timing.atim_window = 0; - } else { - priv->rxon_timing.beacon_interval = - iwl4965_adjust_beacon_interval(conf->beacon_int); - /* TODO: we need to get atim_window from upper stack - * for now we set to 0 */ - priv->rxon_timing.atim_window = 0; - } - - interval_tm_unit = - (le16_to_cpu(priv->rxon_timing.beacon_interval) * 1024); - result = do_div(tsf, interval_tm_unit); - priv->rxon_timing.beacon_init_val = - cpu_to_le32((u32) ((u64) interval_tm_unit - result)); - - IWL_DEBUG_ASSOC - ("beacon interval %d beacon timer %d beacon tim %d\n", - le16_to_cpu(priv->rxon_timing.beacon_interval), - le32_to_cpu(priv->rxon_timing.beacon_init_val), - le16_to_cpu(priv->rxon_timing.atim_window)); -} - -static void iwl_set_flags_for_band(struct iwl_priv *priv, - enum ieee80211_band band) -{ - if (band == IEEE80211_BAND_5GHZ) { - priv->staging_rxon.flags &= - ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK - | RXON_FLG_CCK_MSK); - priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; - } else { - /* Copied from iwl4965_post_associate() */ - if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME) - priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; - else - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - - priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK; - priv->staging_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK; - priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK; - } -} - -/* - * initialize rxon structure with default values from eeprom - */ -static void iwl4965_connection_init_rx_config(struct iwl_priv *priv) -{ - const struct iwl_channel_info *ch_info; - - memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon)); - - switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_AP: - priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP; - break; - - case IEEE80211_IF_TYPE_STA: - priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS; - priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; - break; - - case IEEE80211_IF_TYPE_IBSS: - priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS; - priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK; - priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK | - RXON_FILTER_ACCEPT_GRP_MSK; - break; - - case IEEE80211_IF_TYPE_MNTR: - priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER; - priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK | - RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK; - break; - default: - IWL_ERROR("Unsupported interface type %d\n", priv->iw_mode); - break; - } - -#if 0 - /* TODO: Figure out when short_preamble would be set and cache from - * that */ - if (!hw_to_local(priv->hw)->short_preamble) - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; - else - priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; -#endif - - ch_info = iwl_get_channel_info(priv, priv->band, - le16_to_cpu(priv->active_rxon.channel)); - - if (!ch_info) - ch_info = &priv->channel_info[0]; - - /* - * in some case A channels are all non IBSS - * in this case force B/G channel - */ - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && - !(is_channel_ibss(ch_info))) - ch_info = &priv->channel_info[0]; - - priv->staging_rxon.channel = cpu_to_le16(ch_info->channel); - priv->band = ch_info->band; - - iwl_set_flags_for_band(priv, priv->band); - - priv->staging_rxon.ofdm_basic_rates = - (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; - priv->staging_rxon.cck_basic_rates = - (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; - - priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK | - RXON_FLG_CHANNEL_MODE_PURE_40_MSK); - memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); - memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN); - priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff; - priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff; - iwl_set_rxon_chain(priv); -} - -static int iwl4965_set_mode(struct iwl_priv *priv, int mode) -{ - priv->iw_mode = mode; - - iwl4965_connection_init_rx_config(priv); - memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); - - iwl_clear_stations_table(priv); - - /* dont commit rxon if rf-kill is on*/ - if (!iwl_is_ready_rf(priv)) - return -EAGAIN; - - cancel_delayed_work(&priv->scan_check); - if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARNING("Aborted scan still in progress after 100ms\n"); - IWL_DEBUG_MAC80211("leaving - scan abort failed.\n"); - return -EAGAIN; - } - - iwl4965_commit_rxon(priv); - - return 0; -} - -static void iwl4965_set_rate(struct iwl_priv *priv) -{ - const struct ieee80211_supported_band *hw = NULL; - struct ieee80211_rate *rate; - int i; - - hw = iwl_get_hw_mode(priv, priv->band); - if (!hw) { - IWL_ERROR("Failed to set rate: unable to get hw mode\n"); - return; - } - - priv->active_rate = 0; - priv->active_rate_basic = 0; - - for (i = 0; i < hw->n_bitrates; i++) { - rate = &(hw->bitrates[i]); - if (rate->hw_value < IWL_RATE_COUNT) - priv->active_rate |= (1 << rate->hw_value); - } - - IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n", - priv->active_rate, priv->active_rate_basic); - - /* - * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK) - * otherwise set it to the default of all CCK rates and 6, 12, 24 for - * OFDM - */ - if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK) - priv->staging_rxon.cck_basic_rates = - ((priv->active_rate_basic & - IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF; - else - priv->staging_rxon.cck_basic_rates = - (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; - - if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK) - priv->staging_rxon.ofdm_basic_rates = - ((priv->active_rate_basic & - (IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >> - IWL_FIRST_OFDM_RATE) & 0xFF; - else - priv->staging_rxon.ofdm_basic_rates = - (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; -} - -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT - -#include "iwl-spectrum.h" - -#define BEACON_TIME_MASK_LOW 0x00FFFFFF -#define BEACON_TIME_MASK_HIGH 0xFF000000 -#define TIME_UNIT 1024 - -/* - * extended beacon time format - * time in usec will be changed into a 32-bit value in 8:24 format - * the high 1 byte is the beacon counts - * the lower 3 bytes is the time in usec within one beacon interval - */ - -static u32 iwl4965_usecs_to_beacons(u32 usec, u32 beacon_interval) -{ - u32 quot; - u32 rem; - u32 interval = beacon_interval * 1024; - - if (!interval || !usec) - return 0; - - quot = (usec / interval) & (BEACON_TIME_MASK_HIGH >> 24); - rem = (usec % interval) & BEACON_TIME_MASK_LOW; - - return (quot << 24) + rem; -} - -/* base is usually what we get from ucode with each received frame, - * the same as HW timer counter counting down - */ - -static __le32 iwl4965_add_beacon_time(u32 base, u32 addon, u32 beacon_interval) -{ - u32 base_low = base & BEACON_TIME_MASK_LOW; - u32 addon_low = addon & BEACON_TIME_MASK_LOW; - u32 interval = beacon_interval * TIME_UNIT; - u32 res = (base & BEACON_TIME_MASK_HIGH) + - (addon & BEACON_TIME_MASK_HIGH); - - if (base_low > addon_low) - res += base_low - addon_low; - else if (base_low < addon_low) { - res += interval + base_low - addon_low; - res += (1 << 24); - } else - res += (1 << 24); - - return cpu_to_le32(res); -} - -static int iwl4965_get_measurement(struct iwl_priv *priv, - struct ieee80211_measurement_params *params, - u8 type) -{ - struct iwl4965_spectrum_cmd spectrum; - struct iwl_rx_packet *res; - struct iwl_host_cmd cmd = { - .id = REPLY_SPECTRUM_MEASUREMENT_CMD, - .data = (void *)&spectrum, - .meta.flags = CMD_WANT_SKB, - }; - u32 add_time = le64_to_cpu(params->start_time); - int rc; - int spectrum_resp_status; - int duration = le16_to_cpu(params->duration); - - if (iwl_is_associated(priv)) - add_time = - iwl4965_usecs_to_beacons( - le64_to_cpu(params->start_time) - priv->last_tsf, - le16_to_cpu(priv->rxon_timing.beacon_interval)); - - memset(&spectrum, 0, sizeof(spectrum)); - - spectrum.channel_count = cpu_to_le16(1); - spectrum.flags = - RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK; - spectrum.filter_flags = MEASUREMENT_FILTER_FLAG; - cmd.len = sizeof(spectrum); - spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len)); - - if (iwl_is_associated(priv)) - spectrum.start_time = - iwl4965_add_beacon_time(priv->last_beacon_time, - add_time, - le16_to_cpu(priv->rxon_timing.beacon_interval)); - else - spectrum.start_time = 0; - - spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT); - spectrum.channels[0].channel = params->channel; - spectrum.channels[0].type = type; - if (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK) - spectrum.flags |= RXON_FLG_BAND_24G_MSK | - RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK; - - rc = iwl_send_cmd_sync(priv, &cmd); - if (rc) - return rc; - - res = (struct iwl_rx_packet *)cmd.meta.u.skb->data; - if (res->hdr.flags & IWL_CMD_FAILED_MSK) { - IWL_ERROR("Bad return from REPLY_RX_ON_ASSOC command\n"); - rc = -EIO; - } - - spectrum_resp_status = le16_to_cpu(res->u.spectrum.status); - switch (spectrum_resp_status) { - case 0: /* Command will be handled */ - if (res->u.spectrum.id != 0xff) { - IWL_DEBUG_INFO - ("Replaced existing measurement: %d\n", - res->u.spectrum.id); - priv->measurement_status &= ~MEASUREMENT_READY; - } - priv->measurement_status |= MEASUREMENT_ACTIVE; - rc = 0; - break; - - case 1: /* Command will not be handled */ - rc = -EAGAIN; - break; - } - - dev_kfree_skb_any(cmd.meta.u.skb); - - return rc; -} -#endif - -/****************************************************************************** - * - * Generic RX handler implementations - * - ******************************************************************************/ -static void iwl_rx_reply_alive(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - struct iwl_alive_resp *palive; - struct delayed_work *pwork; - - palive = &pkt->u.alive_frame; - - IWL_DEBUG_INFO("Alive ucode status 0x%08X revision " - "0x%01X 0x%01X\n", - palive->is_valid, palive->ver_type, - palive->ver_subtype); - - if (palive->ver_subtype == INITIALIZE_SUBTYPE) { - IWL_DEBUG_INFO("Initialization Alive received.\n"); - memcpy(&priv->card_alive_init, - &pkt->u.alive_frame, - sizeof(struct iwl_init_alive_resp)); - pwork = &priv->init_alive_start; - } else { - IWL_DEBUG_INFO("Runtime Alive received.\n"); - memcpy(&priv->card_alive, &pkt->u.alive_frame, - sizeof(struct iwl_alive_resp)); - pwork = &priv->alive_start; - } - - /* We delay the ALIVE response by 5ms to - * give the HW RF Kill time to activate... */ - if (palive->is_valid == UCODE_VALID_OK) - queue_delayed_work(priv->workqueue, pwork, - msecs_to_jiffies(5)); - else - IWL_WARNING("uCode did not respond OK.\n"); -} - -static void iwl4965_rx_reply_error(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - - IWL_ERROR("Error Reply type 0x%08X cmd %s (0x%02X) " - "seq 0x%04X ser 0x%08X\n", - le32_to_cpu(pkt->u.err_resp.error_type), - get_cmd_string(pkt->u.err_resp.cmd_id), - pkt->u.err_resp.cmd_id, - le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num), - le32_to_cpu(pkt->u.err_resp.error_info)); -} - -#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x - -static void iwl4965_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - struct iwl_rxon_cmd *rxon = (void *)&priv->active_rxon; - struct iwl4965_csa_notification *csa = &(pkt->u.csa_notif); - IWL_DEBUG_11H("CSA notif: channel %d, status %d\n", - le16_to_cpu(csa->channel), le32_to_cpu(csa->status)); - rxon->channel = csa->channel; - priv->staging_rxon.channel = csa->channel; -} - -static void iwl4965_rx_spectrum_measure_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT - struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - struct iwl4965_spectrum_notification *report = &(pkt->u.spectrum_notif); - - if (!report->state) { - IWL_DEBUG(IWL_DL_11H, - "Spectrum Measure Notification: Start\n"); - return; - } - - memcpy(&priv->measure_report, report, sizeof(*report)); - priv->measurement_status |= MEASUREMENT_READY; -#endif -} - -static void iwl4965_rx_pm_sleep_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - struct iwl4965_sleep_notification *sleep = &(pkt->u.sleep_notif); - IWL_DEBUG_RX("sleep mode: %d, src: %d\n", - sleep->pm_sleep_mode, sleep->pm_wakeup_src); -#endif -} - -static void iwl4965_rx_pm_debug_statistics_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - IWL_DEBUG_RADIO("Dumping %d bytes of unhandled " - "notification for %s:\n", - le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd)); - iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len)); -} - -static void iwl4965_bg_beacon_update(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, beacon_update); - struct sk_buff *beacon; - - /* Pull updated AP beacon from mac80211. will fail if not in AP mode */ - beacon = ieee80211_beacon_get(priv->hw, priv->vif); - - if (!beacon) { - IWL_ERROR("update beacon failed\n"); - return; - } - - mutex_lock(&priv->mutex); - /* new beacon skb is allocated every time; dispose previous.*/ - if (priv->ibss_beacon) - dev_kfree_skb(priv->ibss_beacon); - - priv->ibss_beacon = beacon; - mutex_unlock(&priv->mutex); - - iwl4965_send_beacon_cmd(priv); -} - -/** - * iwl4965_bg_statistics_periodic - Timer callback to queue statistics - * - * This callback is provided in order to send a statistics request. - * - * This timer function is continually reset to execute within - * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION - * was received. We need to ensure we receive the statistics in order - * to update the temperature used for calibrating the TXPOWER. - */ -static void iwl4965_bg_statistics_periodic(unsigned long data) -{ - struct iwl_priv *priv = (struct iwl_priv *)data; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - iwl_send_statistics_request(priv, CMD_ASYNC); -} - -static void iwl4965_rx_beacon_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - struct iwl4965_beacon_notif *beacon = &(pkt->u.beacon_status); - u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); - - IWL_DEBUG_RX("beacon status %x retries %d iss %d " - "tsf %d %d rate %d\n", - le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK, - beacon->beacon_notify_hdr.failure_frame, - le32_to_cpu(beacon->ibss_mgr_status), - le32_to_cpu(beacon->high_tsf), - le32_to_cpu(beacon->low_tsf), rate); -#endif - - if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) && - (!test_bit(STATUS_EXIT_PENDING, &priv->status))) - queue_work(priv->workqueue, &priv->beacon_update); -} - -/* Handle notification from uCode that card's power state is changing - * due to software, hardware, or critical temperature RFKILL */ -static void iwl4965_rx_card_state_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); - unsigned long status = priv->status; - - IWL_DEBUG_RF_KILL("Card state received: HW:%s SW:%s\n", - (flags & HW_CARD_DISABLED) ? "Kill" : "On", - (flags & SW_CARD_DISABLED) ? "Kill" : "On"); - - if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | - RF_CARD_DISABLED)) { - - iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - if (!iwl_grab_nic_access(priv)) { - iwl_write_direct32( - priv, HBUS_TARG_MBX_C, - HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); - - iwl_release_nic_access(priv); - } - - if (!(flags & RXON_CARD_DISABLED)) { - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - if (!iwl_grab_nic_access(priv)) { - iwl_write_direct32( - priv, HBUS_TARG_MBX_C, - HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); - - iwl_release_nic_access(priv); - } - } - - if (flags & RF_CARD_DISABLED) { - iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); - iwl_read32(priv, CSR_UCODE_DRV_GP1); - if (!iwl_grab_nic_access(priv)) - iwl_release_nic_access(priv); - } - } - - if (flags & HW_CARD_DISABLED) - set_bit(STATUS_RF_KILL_HW, &priv->status); - else - clear_bit(STATUS_RF_KILL_HW, &priv->status); - - - if (flags & SW_CARD_DISABLED) - set_bit(STATUS_RF_KILL_SW, &priv->status); - else - clear_bit(STATUS_RF_KILL_SW, &priv->status); - - if (!(flags & RXON_CARD_DISABLED)) - iwl_scan_cancel(priv); - - if ((test_bit(STATUS_RF_KILL_HW, &status) != - test_bit(STATUS_RF_KILL_HW, &priv->status)) || - (test_bit(STATUS_RF_KILL_SW, &status) != - test_bit(STATUS_RF_KILL_SW, &priv->status))) - queue_work(priv->workqueue, &priv->rf_kill); - else - wake_up_interruptible(&priv->wait_command_queue); -} - -int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src) -{ - int ret; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - ret = iwl_grab_nic_access(priv); - if (ret) - goto err; - - if (src == IWL_PWR_SRC_VAUX) { - u32 val; - ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE, - &val); - - if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) - iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VAUX, - ~APMG_PS_CTRL_MSK_PWR_SRC); - } else { - iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, - ~APMG_PS_CTRL_MSK_PWR_SRC); - } - - iwl_release_nic_access(priv); -err: - spin_unlock_irqrestore(&priv->lock, flags); - return ret; -} - -/** - * iwl4965_setup_rx_handlers - Initialize Rx handler callbacks - * - * Setup the RX handlers for each of the reply types sent from the uCode - * to the host. - * - * This function chains into the hardware specific files for them to setup - * any hardware specific handlers as well. - */ -static void iwl_setup_rx_handlers(struct iwl_priv *priv) -{ - priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive; - priv->rx_handlers[REPLY_ERROR] = iwl4965_rx_reply_error; - priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl4965_rx_csa; - priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] = - iwl4965_rx_spectrum_measure_notif; - priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl4965_rx_pm_sleep_notif; - priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] = - iwl4965_rx_pm_debug_statistics_notif; - priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif; - - /* - * The same handler is used for both the REPLY to a discrete - * statistics request from the host as well as for the periodic - * statistics notifications (after received beacons) from the uCode. - */ - priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_rx_statistics; - priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics; - - iwl_setup_rx_scan_handlers(priv); - - /* status change handler */ - priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl4965_rx_card_state_notif; - - priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] = - iwl_rx_missed_beacon_notif; - /* Rx handlers */ - priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl_rx_reply_rx_phy; - priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl_rx_reply_rx; - /* block ack */ - priv->rx_handlers[REPLY_COMPRESSED_BA] = iwl_rx_reply_compressed_ba; - /* Set up hardware specific Rx handlers */ - priv->cfg->ops->lib->rx_handler_setup(priv); -} - -/* - * this should be called while priv->lock is locked -*/ -static void __iwl_rx_replenish(struct iwl_priv *priv) -{ - iwl_rx_allocate(priv); - iwl_rx_queue_restock(priv); -} - - -/** - * iwl_rx_handle - Main entry function for receiving responses from uCode - * - * Uses the priv->rx_handlers callback function array to invoke - * the appropriate handlers, including command responses, - * frame-received notifications, and other notifications. - */ -void iwl_rx_handle(struct iwl_priv *priv) -{ - struct iwl_rx_mem_buffer *rxb; - struct iwl_rx_packet *pkt; - struct iwl_rx_queue *rxq = &priv->rxq; - u32 r, i; - int reclaim; - unsigned long flags; - u8 fill_rx = 0; - u32 count = 8; - - /* uCode's read index (stored in shared DRAM) indicates the last Rx - * buffer that the driver may process (last buffer filled by ucode). */ - r = priv->cfg->ops->lib->shared_mem_rx_idx(priv); - i = rxq->read; - - /* Rx interrupt, but nothing sent from uCode */ - if (i == r) - IWL_DEBUG(IWL_DL_RX, "r = %d, i = %d\n", r, i); - - if (iwl_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2)) - fill_rx = 1; - - while (i != r) { - rxb = rxq->queue[i]; - - /* If an RXB doesn't have a Rx queue slot associated with it, - * then a bug has been introduced in the queue refilling - * routines -- catch it here */ - BUG_ON(rxb == NULL); - - rxq->queue[i] = NULL; - - pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); - pkt = (struct iwl_rx_packet *)rxb->skb->data; - - /* Reclaim a command buffer only if this packet is a response - * to a (driver-originated) command. - * If the packet (e.g. Rx frame) originated from uCode, - * there is no command buffer to reclaim. - * Ucode should set SEQ_RX_FRAME bit if ucode-originated, - * but apparently a few don't get set; catch them here. */ - reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) && - (pkt->hdr.cmd != REPLY_RX_PHY_CMD) && - (pkt->hdr.cmd != REPLY_RX) && - (pkt->hdr.cmd != REPLY_COMPRESSED_BA) && - (pkt->hdr.cmd != STATISTICS_NOTIFICATION) && - (pkt->hdr.cmd != REPLY_TX); - - /* Based on type of command response or notification, - * handle those that need handling via function in - * rx_handlers table. See iwl4965_setup_rx_handlers() */ - if (priv->rx_handlers[pkt->hdr.cmd]) { - IWL_DEBUG(IWL_DL_RX, "r = %d, i = %d, %s, 0x%02x\n", r, - i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); - priv->rx_handlers[pkt->hdr.cmd] (priv, rxb); - } else { - /* No handling needed */ - IWL_DEBUG(IWL_DL_RX, - "r %d i %d No handler needed for %s, 0x%02x\n", - r, i, get_cmd_string(pkt->hdr.cmd), - pkt->hdr.cmd); - } - - if (reclaim) { - /* Invoke any callbacks, transfer the skb to caller, and - * fire off the (possibly) blocking iwl_send_cmd() - * as we reclaim the driver command queue */ - if (rxb && rxb->skb) - iwl_tx_cmd_complete(priv, rxb); - else - IWL_WARNING("Claim null rxb?\n"); - } - - /* For now we just don't re-use anything. We can tweak this - * later to try and re-use notification packets and SKBs that - * fail to Rx correctly */ - if (rxb->skb != NULL) { - priv->alloc_rxb_skb--; - dev_kfree_skb_any(rxb->skb); - rxb->skb = NULL; - } - - pci_unmap_single(priv->pci_dev, rxb->dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); - spin_lock_irqsave(&rxq->lock, flags); - list_add_tail(&rxb->list, &priv->rxq.rx_used); - spin_unlock_irqrestore(&rxq->lock, flags); - i = (i + 1) & RX_QUEUE_MASK; - /* If there are a lot of unused frames, - * restock the Rx queue so ucode wont assert. */ - if (fill_rx) { - count++; - if (count >= 8) { - priv->rxq.read = i; - __iwl_rx_replenish(priv); - count = 0; - } - } - } - - /* Backtrack one entry */ - priv->rxq.read = i; - iwl_rx_queue_restock(priv); -} - -#ifdef CONFIG_IWLWIFI_DEBUG -static void iwl4965_print_rx_config_cmd(struct iwl_priv *priv) -{ - struct iwl_rxon_cmd *rxon = &priv->staging_rxon; - DECLARE_MAC_BUF(mac); - - IWL_DEBUG_RADIO("RX CONFIG:\n"); - iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon)); - IWL_DEBUG_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon->channel)); - IWL_DEBUG_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags)); - IWL_DEBUG_RADIO("u32 filter_flags: 0x%08x\n", - le32_to_cpu(rxon->filter_flags)); - IWL_DEBUG_RADIO("u8 dev_type: 0x%x\n", rxon->dev_type); - IWL_DEBUG_RADIO("u8 ofdm_basic_rates: 0x%02x\n", - rxon->ofdm_basic_rates); - IWL_DEBUG_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates); - IWL_DEBUG_RADIO("u8[6] node_addr: %s\n", - print_mac(mac, rxon->node_addr)); - IWL_DEBUG_RADIO("u8[6] bssid_addr: %s\n", - print_mac(mac, rxon->bssid_addr)); - IWL_DEBUG_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id)); -} -#endif - -static void iwl4965_enable_interrupts(struct iwl_priv *priv) -{ - IWL_DEBUG_ISR("Enabling interrupts\n"); - set_bit(STATUS_INT_ENABLED, &priv->status); - iwl_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK); -} - -/* call this function to flush any scheduled tasklet */ -static inline void iwl_synchronize_irq(struct iwl_priv *priv) -{ - /* wait to make sure we flush pedding tasklet*/ - synchronize_irq(priv->pci_dev->irq); - tasklet_kill(&priv->irq_tasklet); -} - -static inline void iwl4965_disable_interrupts(struct iwl_priv *priv) -{ - clear_bit(STATUS_INT_ENABLED, &priv->status); - - /* disable interrupts from uCode/NIC to host */ - iwl_write32(priv, CSR_INT_MASK, 0x00000000); - - /* acknowledge/clear/reset any interrupts still pending - * from uCode or flow handler (Rx/Tx DMA) */ - iwl_write32(priv, CSR_INT, 0xffffffff); - iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff); - IWL_DEBUG_ISR("Disabled interrupts\n"); -} - - -/** - * iwl4965_irq_handle_error - called for HW or SW error interrupt from card - */ -static void iwl4965_irq_handle_error(struct iwl_priv *priv) -{ - /* Set the FW error flag -- cleared on iwl4965_down */ - set_bit(STATUS_FW_ERROR, &priv->status); - - /* Cancel currently queued command. */ - clear_bit(STATUS_HCMD_ACTIVE, &priv->status); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (priv->debug_level & IWL_DL_FW_ERRORS) { - iwl_dump_nic_error_log(priv); - iwl_dump_nic_event_log(priv); - iwl4965_print_rx_config_cmd(priv); - } -#endif - - wake_up_interruptible(&priv->wait_command_queue); - - /* Keep the restart process from trying to send host - * commands by clearing the INIT status bit */ - clear_bit(STATUS_READY, &priv->status); - - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) { - IWL_DEBUG(IWL_DL_FW_ERRORS, - "Restarting adapter due to uCode error.\n"); - - if (iwl_is_associated(priv)) { - memcpy(&priv->recovery_rxon, &priv->active_rxon, - sizeof(priv->recovery_rxon)); - priv->error_recovering = 1; - } - if (priv->cfg->mod_params->restart_fw) - queue_work(priv->workqueue, &priv->restart); - } -} - -static void iwl4965_error_recovery(struct iwl_priv *priv) -{ - unsigned long flags; - - memcpy(&priv->staging_rxon, &priv->recovery_rxon, - sizeof(priv->staging_rxon)); - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl4965_commit_rxon(priv); - - iwl_rxon_add_station(priv, priv->bssid, 1); - - spin_lock_irqsave(&priv->lock, flags); - priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id); - priv->error_recovering = 0; - spin_unlock_irqrestore(&priv->lock, flags); -} - -static void iwl4965_irq_tasklet(struct iwl_priv *priv) -{ - u32 inta, handled = 0; - u32 inta_fh; - unsigned long flags; -#ifdef CONFIG_IWLWIFI_DEBUG - u32 inta_mask; -#endif - - spin_lock_irqsave(&priv->lock, flags); - - /* Ack/clear/reset pending uCode interrupts. - * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, - * and will clear only when CSR_FH_INT_STATUS gets cleared. */ - inta = iwl_read32(priv, CSR_INT); - iwl_write32(priv, CSR_INT, inta); - - /* Ack/clear/reset pending flow-handler (DMA) interrupts. - * Any new interrupts that happen after this, either while we're - * in this tasklet, or later, will show up in next ISR/tasklet. */ - inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); - iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (priv->debug_level & IWL_DL_ISR) { - /* just for debug */ - inta_mask = iwl_read32(priv, CSR_INT_MASK); - IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", - inta, inta_mask, inta_fh); - } -#endif - - /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not - * atomic, make sure that inta covers all the interrupts that - * we've discovered, even if FH interrupt came in just after - * reading CSR_INT. */ - if (inta_fh & CSR49_FH_INT_RX_MASK) - inta |= CSR_INT_BIT_FH_RX; - if (inta_fh & CSR49_FH_INT_TX_MASK) - inta |= CSR_INT_BIT_FH_TX; - - /* Now service all interrupt bits discovered above. */ - if (inta & CSR_INT_BIT_HW_ERR) { - IWL_ERROR("Microcode HW error detected. Restarting.\n"); - - /* Tell the device to stop sending interrupts */ - iwl4965_disable_interrupts(priv); - - iwl4965_irq_handle_error(priv); - - handled |= CSR_INT_BIT_HW_ERR; - - spin_unlock_irqrestore(&priv->lock, flags); - - return; - } - -#ifdef CONFIG_IWLWIFI_DEBUG - if (priv->debug_level & (IWL_DL_ISR)) { - /* NIC fires this, but we don't use it, redundant with WAKEUP */ - if (inta & CSR_INT_BIT_SCD) - IWL_DEBUG_ISR("Scheduler finished to transmit " - "the frame/frames.\n"); - - /* Alive notification via Rx interrupt will do the real work */ - if (inta & CSR_INT_BIT_ALIVE) - IWL_DEBUG_ISR("Alive interrupt\n"); - } -#endif - /* Safely ignore these bits for debug checks below */ - inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); - - /* HW RF KILL switch toggled */ - if (inta & CSR_INT_BIT_RF_KILL) { - int hw_rf_kill = 0; - if (!(iwl_read32(priv, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) - hw_rf_kill = 1; - - IWL_DEBUG(IWL_DL_RF_KILL, "RF_KILL bit toggled to %s.\n", - hw_rf_kill ? "disable radio":"enable radio"); - - /* driver only loads ucode once setting the interface up. - * the driver as well won't allow loading if RFKILL is set - * therefore no need to restart the driver from this handler - */ - if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) - clear_bit(STATUS_RF_KILL_HW, &priv->status); - - handled |= CSR_INT_BIT_RF_KILL; - } - - /* Chip got too hot and stopped itself */ - if (inta & CSR_INT_BIT_CT_KILL) { - IWL_ERROR("Microcode CT kill error detected.\n"); - handled |= CSR_INT_BIT_CT_KILL; - } - - /* Error detected by uCode */ - if (inta & CSR_INT_BIT_SW_ERR) { - IWL_ERROR("Microcode SW error detected. Restarting 0x%X.\n", - inta); - iwl4965_irq_handle_error(priv); - handled |= CSR_INT_BIT_SW_ERR; - } - - /* uCode wakes up after power-down sleep */ - if (inta & CSR_INT_BIT_WAKEUP) { - IWL_DEBUG_ISR("Wakeup interrupt\n"); - iwl_rx_queue_update_write_ptr(priv, &priv->rxq); - iwl_txq_update_write_ptr(priv, &priv->txq[0]); - iwl_txq_update_write_ptr(priv, &priv->txq[1]); - iwl_txq_update_write_ptr(priv, &priv->txq[2]); - iwl_txq_update_write_ptr(priv, &priv->txq[3]); - iwl_txq_update_write_ptr(priv, &priv->txq[4]); - iwl_txq_update_write_ptr(priv, &priv->txq[5]); - - handled |= CSR_INT_BIT_WAKEUP; - } - - /* All uCode command responses, including Tx command responses, - * Rx "responses" (frame-received notification), and other - * notifications from uCode come through here*/ - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { - iwl_rx_handle(priv); - handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); - } - - if (inta & CSR_INT_BIT_FH_TX) { - IWL_DEBUG_ISR("Tx interrupt\n"); - handled |= CSR_INT_BIT_FH_TX; - /* FH finished to write, send event */ - priv->ucode_write_complete = 1; - wake_up_interruptible(&priv->wait_command_queue); - } - - if (inta & ~handled) - IWL_ERROR("Unhandled INTA bits 0x%08x\n", inta & ~handled); - - if (inta & ~CSR_INI_SET_MASK) { - IWL_WARNING("Disabled INTA bits 0x%08x were pending\n", - inta & ~CSR_INI_SET_MASK); - IWL_WARNING(" with FH_INT = 0x%08x\n", inta_fh); - } - - /* Re-enable all interrupts */ - /* only Re-enable if diabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &priv->status)) - iwl4965_enable_interrupts(priv); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (priv->debug_level & (IWL_DL_ISR)) { - inta = iwl_read32(priv, CSR_INT); - inta_mask = iwl_read32(priv, CSR_INT_MASK); - inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); - IWL_DEBUG_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " - "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); - } -#endif - spin_unlock_irqrestore(&priv->lock, flags); -} - -static irqreturn_t iwl4965_isr(int irq, void *data) -{ - struct iwl_priv *priv = data; - u32 inta, inta_mask; - u32 inta_fh; - if (!priv) - return IRQ_NONE; - - spin_lock(&priv->lock); - - /* Disable (but don't clear!) interrupts here to avoid - * back-to-back ISRs and sporadic interrupts from our NIC. - * If we have something to service, the tasklet will re-enable ints. - * If we *don't* have something, we'll re-enable before leaving here. */ - inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */ - iwl_write32(priv, CSR_INT_MASK, 0x00000000); - - /* Discover which interrupts are active/pending */ - inta = iwl_read32(priv, CSR_INT); - inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); - - /* Ignore interrupt if there's nothing in NIC to service. - * This may be due to IRQ shared with another device, - * or due to sporadic interrupts thrown from our NIC. */ - if (!inta && !inta_fh) { - IWL_DEBUG_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n"); - goto none; - } - - if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { - /* Hardware disappeared. It might have already raised - * an interrupt */ - IWL_WARNING("HARDWARE GONE?? INTA == 0x%080x\n", inta); - goto unplugged; - } - - IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", - inta, inta_mask, inta_fh); - - inta &= ~CSR_INT_BIT_SCD; - - /* iwl4965_irq_tasklet() will service interrupts and re-enable them */ - if (likely(inta || inta_fh)) - tasklet_schedule(&priv->irq_tasklet); - - unplugged: - spin_unlock(&priv->lock); - return IRQ_HANDLED; - - none: - /* re-enable interrupts here since we don't have anything to service. */ - /* only Re-enable if diabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &priv->status)) - iwl4965_enable_interrupts(priv); - spin_unlock(&priv->lock); - return IRQ_NONE; -} - -/****************************************************************************** - * - * uCode download functions - * - ******************************************************************************/ - -static void iwl4965_dealloc_ucode_pci(struct iwl_priv *priv) -{ - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot); -} - -static void iwl4965_nic_start(struct iwl_priv *priv) -{ - /* Remove all resets to allow NIC to operate */ - iwl_write32(priv, CSR_RESET, 0); -} - - -/** - * iwl4965_read_ucode - Read uCode images from disk file. - * - * Copy into buffers for card to fetch via bus-mastering - */ -static int iwl4965_read_ucode(struct iwl_priv *priv) -{ - struct iwl_ucode *ucode; - int ret; - const struct firmware *ucode_raw; - const char *name = priv->cfg->fw_name; - u8 *src; - size_t len; - u32 ver, inst_size, data_size, init_size, init_data_size, boot_size; - - /* Ask kernel firmware_class module to get the boot firmware off disk. - * request_firmware() is synchronous, file is in memory on return. */ - ret = request_firmware(&ucode_raw, name, &priv->pci_dev->dev); - if (ret < 0) { - IWL_ERROR("%s firmware file req failed: Reason %d\n", - name, ret); - goto error; - } - - IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n", - name, ucode_raw->size); - - /* Make sure that we got at least our header! */ - if (ucode_raw->size < sizeof(*ucode)) { - IWL_ERROR("File size way too small!\n"); - ret = -EINVAL; - goto err_release; - } - - /* Data from ucode file: header followed by uCode images */ - ucode = (void *)ucode_raw->data; - - ver = le32_to_cpu(ucode->ver); - inst_size = le32_to_cpu(ucode->inst_size); - data_size = le32_to_cpu(ucode->data_size); - init_size = le32_to_cpu(ucode->init_size); - init_data_size = le32_to_cpu(ucode->init_data_size); - boot_size = le32_to_cpu(ucode->boot_size); - - IWL_DEBUG_INFO("f/w package hdr ucode version = 0x%x\n", ver); - IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n", - inst_size); - IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n", - data_size); - IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n", - init_size); - IWL_DEBUG_INFO("f/w package hdr init data size = %u\n", - init_data_size); - IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n", - boot_size); - - /* Verify size of file vs. image size info in file's header */ - if (ucode_raw->size < sizeof(*ucode) + - inst_size + data_size + init_size + - init_data_size + boot_size) { - - IWL_DEBUG_INFO("uCode file size %d too small\n", - (int)ucode_raw->size); - ret = -EINVAL; - goto err_release; - } - - /* Verify that uCode images will fit in card's SRAM */ - if (inst_size > priv->hw_params.max_inst_size) { - IWL_DEBUG_INFO("uCode instr len %d too large to fit in\n", - inst_size); - ret = -EINVAL; - goto err_release; - } - - if (data_size > priv->hw_params.max_data_size) { - IWL_DEBUG_INFO("uCode data len %d too large to fit in\n", - data_size); - ret = -EINVAL; - goto err_release; - } - if (init_size > priv->hw_params.max_inst_size) { - IWL_DEBUG_INFO - ("uCode init instr len %d too large to fit in\n", - init_size); - ret = -EINVAL; - goto err_release; - } - if (init_data_size > priv->hw_params.max_data_size) { - IWL_DEBUG_INFO - ("uCode init data len %d too large to fit in\n", - init_data_size); - ret = -EINVAL; - goto err_release; - } - if (boot_size > priv->hw_params.max_bsm_size) { - IWL_DEBUG_INFO - ("uCode boot instr len %d too large to fit in\n", - boot_size); - ret = -EINVAL; - goto err_release; - } - - /* Allocate ucode buffers for card's bus-master loading ... */ - - /* Runtime instructions and 2 copies of data: - * 1) unmodified from disk - * 2) backup cache for save/restore during power-downs */ - priv->ucode_code.len = inst_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code); - - priv->ucode_data.len = data_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data); - - priv->ucode_data_backup.len = data_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup); - - /* Initialization instructions and data */ - if (init_size && init_data_size) { - priv->ucode_init.len = init_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init); - - priv->ucode_init_data.len = init_data_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data); - - if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr) - goto err_pci_alloc; - } - - /* Bootstrap (instructions only, no data) */ - if (boot_size) { - priv->ucode_boot.len = boot_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot); - - if (!priv->ucode_boot.v_addr) - goto err_pci_alloc; - } - - /* Copy images into buffers for card's bus-master reads ... */ - - /* Runtime instructions (first block of data in file) */ - src = &ucode->data[0]; - len = priv->ucode_code.len; - IWL_DEBUG_INFO("Copying (but not loading) uCode instr len %Zd\n", len); - memcpy(priv->ucode_code.v_addr, src, len); - IWL_DEBUG_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", - priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr); - - /* Runtime data (2nd block) - * NOTE: Copy into backup buffer will be done in iwl4965_up() */ - src = &ucode->data[inst_size]; - len = priv->ucode_data.len; - IWL_DEBUG_INFO("Copying (but not loading) uCode data len %Zd\n", len); - memcpy(priv->ucode_data.v_addr, src, len); - memcpy(priv->ucode_data_backup.v_addr, src, len); - - /* Initialization instructions (3rd block) */ - if (init_size) { - src = &ucode->data[inst_size + data_size]; - len = priv->ucode_init.len; - IWL_DEBUG_INFO("Copying (but not loading) init instr len %Zd\n", - len); - memcpy(priv->ucode_init.v_addr, src, len); - } - - /* Initialization data (4th block) */ - if (init_data_size) { - src = &ucode->data[inst_size + data_size + init_size]; - len = priv->ucode_init_data.len; - IWL_DEBUG_INFO("Copying (but not loading) init data len %Zd\n", - len); - memcpy(priv->ucode_init_data.v_addr, src, len); - } - - /* Bootstrap instructions (5th block) */ - src = &ucode->data[inst_size + data_size + init_size + init_data_size]; - len = priv->ucode_boot.len; - IWL_DEBUG_INFO("Copying (but not loading) boot instr len %Zd\n", len); - memcpy(priv->ucode_boot.v_addr, src, len); - - /* We have our copies now, allow OS release its copies */ - release_firmware(ucode_raw); - return 0; - - err_pci_alloc: - IWL_ERROR("failed to allocate pci memory\n"); - ret = -ENOMEM; - iwl4965_dealloc_ucode_pci(priv); - - err_release: - release_firmware(ucode_raw); - - error: - return ret; -} - -/** - * iwl_alive_start - called after REPLY_ALIVE notification received - * from protocol/runtime uCode (initialization uCode's - * Alive gets handled by iwl_init_alive_start()). - */ -static void iwl_alive_start(struct iwl_priv *priv) -{ - int ret = 0; - - IWL_DEBUG_INFO("Runtime Alive received.\n"); - - if (priv->card_alive.is_valid != UCODE_VALID_OK) { - /* We had an error bringing up the hardware, so take it - * all the way back down so we can try again */ - IWL_DEBUG_INFO("Alive failed.\n"); - goto restart; - } - - /* Initialize uCode has loaded Runtime uCode ... verify inst image. - * This is a paranoid check, because we would not have gotten the - * "runtime" alive if code weren't properly loaded. */ - if (iwl_verify_ucode(priv)) { - /* Runtime instruction load was bad; - * take it all the way back down so we can try again */ - IWL_DEBUG_INFO("Bad runtime uCode load.\n"); - goto restart; - } - - iwl_clear_stations_table(priv); - ret = priv->cfg->ops->lib->alive_notify(priv); - if (ret) { - IWL_WARNING("Could not complete ALIVE transition [ntf]: %d\n", - ret); - goto restart; - } - - /* After the ALIVE response, we can send host commands to 4965 uCode */ - set_bit(STATUS_ALIVE, &priv->status); - - if (iwl_is_rfkill(priv)) - return; - - ieee80211_wake_queues(priv->hw); - - priv->active_rate = priv->rates_mask; - priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK; - - if (iwl_is_associated(priv)) { - struct iwl_rxon_cmd *active_rxon = - (struct iwl_rxon_cmd *)&priv->active_rxon; - - memcpy(&priv->staging_rxon, &priv->active_rxon, - sizeof(priv->staging_rxon)); - active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - } else { - /* Initialize our rx_config data */ - iwl4965_connection_init_rx_config(priv); - memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); - } - - /* Configure Bluetooth device coexistence support */ - iwl4965_send_bt_config(priv); - - iwl_reset_run_time_calib(priv); - - /* Configure the adapter for unassociated operation */ - iwl4965_commit_rxon(priv); - - /* At this point, the NIC is initialized and operational */ - iwl_rf_kill_ct_config(priv); - - iwl_leds_register(priv); - - IWL_DEBUG_INFO("ALIVE processing complete.\n"); - set_bit(STATUS_READY, &priv->status); - wake_up_interruptible(&priv->wait_command_queue); - - if (priv->error_recovering) - iwl4965_error_recovery(priv); - - iwl_power_update_mode(priv, 1); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); - - if (test_and_clear_bit(STATUS_MODE_PENDING, &priv->status)) - iwl4965_set_mode(priv, priv->iw_mode); - - return; - - restart: - queue_work(priv->workqueue, &priv->restart); -} - -static void iwl_cancel_deferred_work(struct iwl_priv *priv); - -static void __iwl4965_down(struct iwl_priv *priv) -{ - unsigned long flags; - int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status); - - IWL_DEBUG_INFO(DRV_NAME " is going down\n"); - - if (!exit_pending) - set_bit(STATUS_EXIT_PENDING, &priv->status); - - iwl_leds_unregister(priv); - - iwl_clear_stations_table(priv); - - /* Unblock any waiting calls */ - wake_up_interruptible_all(&priv->wait_command_queue); - - /* Wipe out the EXIT_PENDING status bit if we are not actually - * exiting the module */ - if (!exit_pending) - clear_bit(STATUS_EXIT_PENDING, &priv->status); - - /* stop and reset the on-board processor */ - iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); - - /* tell the device to stop sending interrupts */ - spin_lock_irqsave(&priv->lock, flags); - iwl4965_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - iwl_synchronize_irq(priv); - - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); - - /* If we have not previously called iwl4965_init() then - * clear all bits but the RF Kill and SUSPEND bits and return */ - if (!iwl_is_init(priv)) { - priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_RF_KILL_SW, &priv->status) << - STATUS_RF_KILL_SW | - test_bit(STATUS_GEO_CONFIGURED, &priv->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_IN_SUSPEND, &priv->status) << - STATUS_IN_SUSPEND | - test_bit(STATUS_EXIT_PENDING, &priv->status) << - STATUS_EXIT_PENDING; - goto exit; - } - - /* ...otherwise clear out all the status bits but the RF Kill and - * SUSPEND bits and continue taking the NIC down. */ - priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_RF_KILL_SW, &priv->status) << - STATUS_RF_KILL_SW | - test_bit(STATUS_GEO_CONFIGURED, &priv->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_IN_SUSPEND, &priv->status) << - STATUS_IN_SUSPEND | - test_bit(STATUS_FW_ERROR, &priv->status) << - STATUS_FW_ERROR | - test_bit(STATUS_EXIT_PENDING, &priv->status) << - STATUS_EXIT_PENDING; - - spin_lock_irqsave(&priv->lock, flags); - iwl_clear_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - spin_unlock_irqrestore(&priv->lock, flags); - - iwl_txq_ctx_stop(priv); - iwl_rxq_stop(priv); - - spin_lock_irqsave(&priv->lock, flags); - if (!iwl_grab_nic_access(priv)) { - iwl_write_prph(priv, APMG_CLK_DIS_REG, - APMG_CLK_VAL_DMA_CLK_RQT); - iwl_release_nic_access(priv); - } - spin_unlock_irqrestore(&priv->lock, flags); - - udelay(5); - - /* FIXME: apm_ops.suspend(priv) */ - priv->cfg->ops->lib->apm_ops.reset(priv); - priv->cfg->ops->lib->free_shared_mem(priv); - - exit: - memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp)); - - if (priv->ibss_beacon) - dev_kfree_skb(priv->ibss_beacon); - priv->ibss_beacon = NULL; - - /* clear out any free frames */ - iwl_clear_free_frames(priv); -} - -static void iwl4965_down(struct iwl_priv *priv) -{ - mutex_lock(&priv->mutex); - __iwl4965_down(priv); - mutex_unlock(&priv->mutex); - - iwl_cancel_deferred_work(priv); -} - -#define MAX_HW_RESTARTS 5 - -static int __iwl4965_up(struct iwl_priv *priv) -{ - int i; - int ret; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { - IWL_WARNING("Exit pending; will not bring the NIC up\n"); - return -EIO; - } - - if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { - IWL_ERROR("ucode not available for device bringup\n"); - return -EIO; - } - - /* If platform's RF_KILL switch is NOT set to KILL */ - if (iwl_read32(priv, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) - clear_bit(STATUS_RF_KILL_HW, &priv->status); - else - set_bit(STATUS_RF_KILL_HW, &priv->status); - - if (!test_bit(STATUS_IN_SUSPEND, &priv->status) && - iwl_is_rfkill(priv)) { - IWL_WARNING("Radio disabled by %s RF Kill switch\n", - test_bit(STATUS_RF_KILL_HW, &priv->status) ? "HW" : "SW"); - return -ENODEV; - } - - iwl_write32(priv, CSR_INT, 0xFFFFFFFF); - - ret = priv->cfg->ops->lib->alloc_shared_mem(priv); - if (ret) { - IWL_ERROR("Unable to allocate shared memory\n"); - return ret; - } - - ret = iwl_hw_nic_init(priv); - if (ret) { - IWL_ERROR("Unable to init nic\n"); - return ret; - } - - /* make sure rfkill handshake bits are cleared */ - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - /* clear (again), then enable host interrupts */ - iwl_write32(priv, CSR_INT, 0xFFFFFFFF); - iwl4965_enable_interrupts(priv); - - /* really make sure rfkill handshake bits are cleared */ - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - - /* Copy original ucode data image from disk into backup cache. - * This will be used to initialize the on-board processor's - * data SRAM for a clean start when the runtime program first loads. */ - memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, - priv->ucode_data.len); - - /* We return success when we resume from suspend and rf_kill is on. */ - if (test_bit(STATUS_RF_KILL_HW, &priv->status) || - test_bit(STATUS_RF_KILL_SW, &priv->status)) - return 0; - - for (i = 0; i < MAX_HW_RESTARTS; i++) { - - iwl_clear_stations_table(priv); - - /* load bootstrap state machine, - * load bootstrap program into processor's memory, - * prepare to load the "initialize" uCode */ - ret = priv->cfg->ops->lib->load_ucode(priv); - - if (ret) { - IWL_ERROR("Unable to set up bootstrap uCode: %d\n", ret); - continue; - } - - /* Clear out the uCode error bit if it is set */ - clear_bit(STATUS_FW_ERROR, &priv->status); - - /* start card; "initialize" will load runtime ucode */ - iwl4965_nic_start(priv); - - IWL_DEBUG_INFO(DRV_NAME " is coming up\n"); - - return 0; - } - - set_bit(STATUS_EXIT_PENDING, &priv->status); - __iwl4965_down(priv); - clear_bit(STATUS_EXIT_PENDING, &priv->status); - - /* tried to restart and config the device for as long as our - * patience could withstand */ - IWL_ERROR("Unable to initialize device after %d attempts.\n", i); - return -EIO; -} - - -/***************************************************************************** - * - * Workqueue callbacks - * - *****************************************************************************/ - -static void iwl_bg_init_alive_start(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, init_alive_start.work); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - priv->cfg->ops->lib->init_alive_start(priv); - mutex_unlock(&priv->mutex); -} - -static void iwl_bg_alive_start(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, alive_start.work); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - iwl_alive_start(priv); - mutex_unlock(&priv->mutex); -} - -static void iwl4965_bg_rf_kill(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, rf_kill); - - wake_up_interruptible(&priv->wait_command_queue); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - - if (!iwl_is_rfkill(priv)) { - IWL_DEBUG(IWL_DL_RF_KILL, - "HW and/or SW RF Kill no longer active, restarting " - "device\n"); - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) - queue_work(priv->workqueue, &priv->restart); - } else { - /* make sure mac80211 stop sending Tx frame */ - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); - - if (!test_bit(STATUS_RF_KILL_HW, &priv->status)) - IWL_DEBUG_RF_KILL("Can not turn radio back on - " - "disabled by SW switch\n"); - else - IWL_WARNING("Radio Frequency Kill Switch is On:\n" - "Kill switch must be turned off for " - "wireless networking to work.\n"); - } - mutex_unlock(&priv->mutex); - iwl_rfkill_set_hw_state(priv); -} - -static void iwl4965_bg_set_monitor(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, - struct iwl_priv, set_monitor); - int ret; - - IWL_DEBUG(IWL_DL_STATE, "setting monitor mode\n"); - - mutex_lock(&priv->mutex); - - ret = iwl4965_set_mode(priv, IEEE80211_IF_TYPE_MNTR); - - if (ret) { - if (ret == -EAGAIN) - IWL_DEBUG(IWL_DL_STATE, "leave - not ready\n"); - else - IWL_ERROR("iwl4965_set_mode() failed ret = %d\n", ret); - } - - mutex_unlock(&priv->mutex); -} - -static void iwl_bg_run_time_calib_work(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, - run_time_calib_work); - - mutex_lock(&priv->mutex); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status) || - test_bit(STATUS_SCANNING, &priv->status)) { - mutex_unlock(&priv->mutex); - return; - } - - if (priv->start_calib) { - iwl_chain_noise_calibration(priv, &priv->statistics); - - iwl_sensitivity_calibration(priv, &priv->statistics); - } - - mutex_unlock(&priv->mutex); - return; -} - -static void iwl4965_bg_up(struct work_struct *data) -{ - struct iwl_priv *priv = container_of(data, struct iwl_priv, up); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - __iwl4965_up(priv); - mutex_unlock(&priv->mutex); - iwl_rfkill_set_hw_state(priv); -} - -static void iwl4965_bg_restart(struct work_struct *data) -{ - struct iwl_priv *priv = container_of(data, struct iwl_priv, restart); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - iwl4965_down(priv); - queue_work(priv->workqueue, &priv->up); -} - -static void iwl4965_bg_rx_replenish(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, rx_replenish); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - iwl_rx_replenish(priv); - mutex_unlock(&priv->mutex); -} - -#define IWL_DELAY_NEXT_SCAN (HZ*2) - -static void iwl4965_post_associate(struct iwl_priv *priv) -{ - struct ieee80211_conf *conf = NULL; - int ret = 0; - DECLARE_MAC_BUF(mac); - unsigned long flags; - - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__); - return; - } - - IWL_DEBUG_ASSOC("Associated as %d to: %s\n", - priv->assoc_id, - print_mac(mac, priv->active_rxon.bssid_addr)); - - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - - if (!priv->vif || !priv->is_open) - return; - - iwl_scan_cancel_timeout(priv, 200); - - conf = ieee80211_get_hw_conf(priv->hw); - - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl4965_commit_rxon(priv); - - memset(&priv->rxon_timing, 0, sizeof(struct iwl4965_rxon_time_cmd)); - iwl4965_setup_rxon_timing(priv); - ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING, - sizeof(priv->rxon_timing), &priv->rxon_timing); - if (ret) - IWL_WARNING("REPLY_RXON_TIMING failed - " - "Attempting to continue.\n"); - - priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK; - - if (priv->current_ht_config.is_ht) - iwl_set_rxon_ht(priv, &priv->current_ht_config); - - iwl_set_rxon_chain(priv); - priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id); - - IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n", - priv->assoc_id, priv->beacon_int); - - if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE) - priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; - else - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; - - if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) { - if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME) - priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; - else - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - - } - - iwl4965_commit_rxon(priv); - - switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_STA: - break; - - case IEEE80211_IF_TYPE_IBSS: - - /* assume default assoc id */ - priv->assoc_id = 1; - - iwl_rxon_add_station(priv, priv->bssid, 0); - iwl4965_send_beacon_cmd(priv); - - break; - - default: - IWL_ERROR("%s Should not be called in %d mode\n", - __FUNCTION__, priv->iw_mode); - break; - } - - /* Enable Rx differential gain and sensitivity calibrations */ - iwl_chain_noise_reset(priv); - priv->start_calib = 1; - - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) - priv->assoc_station_added = 1; - - spin_lock_irqsave(&priv->lock, flags); - iwl_activate_qos(priv, 0); - spin_unlock_irqrestore(&priv->lock, flags); - - iwl_power_update_mode(priv, 0); - /* we have just associated, don't start scan too early */ - priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN; -} - -static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf); - -static void iwl_bg_scan_completed(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, scan_completed); - - IWL_DEBUG_SCAN("SCAN complete scan\n"); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (test_bit(STATUS_CONF_PENDING, &priv->status)) - iwl4965_mac_config(priv->hw, ieee80211_get_hw_conf(priv->hw)); - - ieee80211_scan_completed(priv->hw); - - /* Since setting the TXPOWER may have been deferred while - * performing the scan, fire one off */ - mutex_lock(&priv->mutex); - iwl_set_tx_power(priv, priv->tx_power_user_lmt, true); - mutex_unlock(&priv->mutex); -} - -/***************************************************************************** - * - * mac80211 entry point functions - * - *****************************************************************************/ - -#define UCODE_READY_TIMEOUT (4 * HZ) - -static int iwl4965_mac_start(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - int ret; - - IWL_DEBUG_MAC80211("enter\n"); - - if (pci_enable_device(priv->pci_dev)) { - IWL_ERROR("Fail to pci_enable_device\n"); - return -ENODEV; - } - pci_restore_state(priv->pci_dev); - pci_enable_msi(priv->pci_dev); - - ret = request_irq(priv->pci_dev->irq, iwl4965_isr, IRQF_SHARED, - DRV_NAME, priv); - if (ret) { - IWL_ERROR("Error allocating IRQ %d\n", priv->pci_dev->irq); - goto out_disable_msi; - } - - /* we should be verifying the device is ready to be opened */ - mutex_lock(&priv->mutex); - - memset(&priv->staging_rxon, 0, sizeof(struct iwl_rxon_cmd)); - /* fetch ucode file from disk, alloc and copy to bus-master buffers ... - * ucode filename and max sizes are card-specific. */ - - if (!priv->ucode_code.len) { - ret = iwl4965_read_ucode(priv); - if (ret) { - IWL_ERROR("Could not read microcode: %d\n", ret); - mutex_unlock(&priv->mutex); - goto out_release_irq; - } - } - - ret = __iwl4965_up(priv); - - mutex_unlock(&priv->mutex); - - iwl_rfkill_set_hw_state(priv); - - if (ret) - goto out_release_irq; - - IWL_DEBUG_INFO("Start UP work done.\n"); - - if (test_bit(STATUS_IN_SUSPEND, &priv->status)) - return 0; - - /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from - * mac80211 will not be run successfully. */ - ret = wait_event_interruptible_timeout(priv->wait_command_queue, - test_bit(STATUS_READY, &priv->status), - UCODE_READY_TIMEOUT); - if (!ret) { - if (!test_bit(STATUS_READY, &priv->status)) { - IWL_ERROR("START_ALIVE timeout after %dms.\n", - jiffies_to_msecs(UCODE_READY_TIMEOUT)); - ret = -ETIMEDOUT; - goto out_release_irq; - } - } - - priv->is_open = 1; - IWL_DEBUG_MAC80211("leave\n"); - return 0; - -out_release_irq: - free_irq(priv->pci_dev->irq, priv); -out_disable_msi: - pci_disable_msi(priv->pci_dev); - pci_disable_device(priv->pci_dev); - priv->is_open = 0; - IWL_DEBUG_MAC80211("leave - failed\n"); - return ret; -} - -static void iwl4965_mac_stop(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211("enter\n"); - - if (!priv->is_open) { - IWL_DEBUG_MAC80211("leave - skip\n"); - return; - } - - priv->is_open = 0; - - if (iwl_is_ready_rf(priv)) { - /* stop mac, cancel any scan request and clear - * RXON_FILTER_ASSOC_MSK BIT - */ - mutex_lock(&priv->mutex); - iwl_scan_cancel_timeout(priv, 100); - mutex_unlock(&priv->mutex); - } - - iwl4965_down(priv); - - flush_workqueue(priv->workqueue); - free_irq(priv->pci_dev->irq, priv); - pci_disable_msi(priv->pci_dev); - pci_save_state(priv->pci_dev); - pci_disable_device(priv->pci_dev); - - IWL_DEBUG_MAC80211("leave\n"); -} - -static int iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211("enter\n"); - - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { - IWL_DEBUG_MAC80211("leave - monitor\n"); - dev_kfree_skb_any(skb); - return 0; - } - - IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, - ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); - - if (iwl_tx_skb(priv, skb)) - dev_kfree_skb_any(skb); - - IWL_DEBUG_MAC80211("leave\n"); - return 0; -} - -static int iwl4965_mac_add_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) -{ - struct iwl_priv *priv = hw->priv; - unsigned long flags; - DECLARE_MAC_BUF(mac); - - IWL_DEBUG_MAC80211("enter: type %d\n", conf->type); - - if (priv->vif) { - IWL_DEBUG_MAC80211("leave - vif != NULL\n"); - return -EOPNOTSUPP; - } - - spin_lock_irqsave(&priv->lock, flags); - priv->vif = conf->vif; - - spin_unlock_irqrestore(&priv->lock, flags); - - mutex_lock(&priv->mutex); - - if (conf->mac_addr) { - IWL_DEBUG_MAC80211("Set %s\n", print_mac(mac, conf->mac_addr)); - memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN); - } - - if (iwl4965_set_mode(priv, conf->type) == -EAGAIN) - /* we are not ready, will run again when ready */ - set_bit(STATUS_MODE_PENDING, &priv->status); - - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211("leave\n"); - return 0; -} - -/** - * iwl4965_mac_config - mac80211 config callback - * - * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to - * be set inappropriately and the driver currently sets the hardware up to - * use it whenever needed. - */ -static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) -{ - struct iwl_priv *priv = hw->priv; - const struct iwl_channel_info *ch_info; - unsigned long flags; - int ret = 0; - u16 channel; - - mutex_lock(&priv->mutex); - IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value); - - priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP); - - if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) { - IWL_DEBUG_MAC80211("leave - RF-KILL - waiting for uCode\n"); - goto out; - } - - if (!conf->radio_enabled) - iwl_radio_kill_sw_disable_radio(priv); - - if (!iwl_is_ready(priv)) { - IWL_DEBUG_MAC80211("leave - not ready\n"); - ret = -EIO; - goto out; - } - - if (unlikely(!priv->cfg->mod_params->disable_hw_scan && - test_bit(STATUS_SCANNING, &priv->status))) { - IWL_DEBUG_MAC80211("leave - scanning\n"); - set_bit(STATUS_CONF_PENDING, &priv->status); - mutex_unlock(&priv->mutex); - return 0; - } - - channel = ieee80211_frequency_to_channel(conf->channel->center_freq); - ch_info = iwl_get_channel_info(priv, conf->channel->band, channel); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_MAC80211("leave - invalid channel\n"); - ret = -EINVAL; - goto out; - } - - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS && - !is_channel_ibss(ch_info)) { - IWL_ERROR("channel %d in band %d not IBSS channel\n", - conf->channel->hw_value, conf->channel->band); - ret = -EINVAL; - goto out; - } - - spin_lock_irqsave(&priv->lock, flags); - - - /* if we are switching from ht to 2.4 clear flags - * from any ht related info since 2.4 does not - * support ht */ - if ((le16_to_cpu(priv->staging_rxon.channel) != channel) -#ifdef IEEE80211_CONF_CHANNEL_SWITCH - && !(conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) -#endif - ) - priv->staging_rxon.flags = 0; - - iwl_set_rxon_channel(priv, conf->channel->band, channel); - - iwl_set_flags_for_band(priv, conf->channel->band); - - /* The list of supported rates and rate mask can be different - * for each band; since the band may have changed, reset - * the rate mask to what mac80211 lists */ - iwl4965_set_rate(priv); - - spin_unlock_irqrestore(&priv->lock, flags); - -#ifdef IEEE80211_CONF_CHANNEL_SWITCH - if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) { - iwl4965_hw_channel_switch(priv, conf->channel); - goto out; - } -#endif - - if (!conf->radio_enabled) { - IWL_DEBUG_MAC80211("leave - radio disabled\n"); - goto out; - } - - if (iwl_is_rfkill(priv)) { - IWL_DEBUG_MAC80211("leave - RF kill\n"); - ret = -EIO; - goto out; - } - - IWL_DEBUG_MAC80211("TX Power old=%d new=%d\n", - priv->tx_power_user_lmt, conf->power_level); - - iwl_set_tx_power(priv, conf->power_level, false); - - iwl4965_set_rate(priv); - - if (memcmp(&priv->active_rxon, - &priv->staging_rxon, sizeof(priv->staging_rxon))) - iwl4965_commit_rxon(priv); - else - IWL_DEBUG_INFO("No re-sending same RXON configuration.\n"); - - IWL_DEBUG_MAC80211("leave\n"); - -out: - clear_bit(STATUS_CONF_PENDING, &priv->status); - mutex_unlock(&priv->mutex); - return ret; -} - -static void iwl4965_config_ap(struct iwl_priv *priv) -{ - int ret = 0; - unsigned long flags; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* The following should be done only at AP bring up */ - if (!(iwl_is_associated(priv))) { - - /* RXON - unassoc (to set timing command) */ - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl4965_commit_rxon(priv); - - /* RXON Timing */ - memset(&priv->rxon_timing, 0, sizeof(struct iwl4965_rxon_time_cmd)); - iwl4965_setup_rxon_timing(priv); - ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING, - sizeof(priv->rxon_timing), &priv->rxon_timing); - if (ret) - IWL_WARNING("REPLY_RXON_TIMING failed - " - "Attempting to continue.\n"); - - iwl_set_rxon_chain(priv); - - /* FIXME: what should be the assoc_id for AP? */ - priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id); - if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE) - priv->staging_rxon.flags |= - RXON_FLG_SHORT_PREAMBLE_MSK; - else - priv->staging_rxon.flags &= - ~RXON_FLG_SHORT_PREAMBLE_MSK; - - if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) { - if (priv->assoc_capability & - WLAN_CAPABILITY_SHORT_SLOT_TIME) - priv->staging_rxon.flags |= - RXON_FLG_SHORT_SLOT_MSK; - else - priv->staging_rxon.flags &= - ~RXON_FLG_SHORT_SLOT_MSK; - - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) - priv->staging_rxon.flags &= - ~RXON_FLG_SHORT_SLOT_MSK; - } - /* restore RXON assoc */ - priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK; - iwl4965_commit_rxon(priv); - spin_lock_irqsave(&priv->lock, flags); - iwl_activate_qos(priv, 1); - spin_unlock_irqrestore(&priv->lock, flags); - iwl_rxon_add_station(priv, iwl_bcast_addr, 0); - } - iwl4965_send_beacon_cmd(priv); - - /* FIXME - we need to add code here to detect a totally new - * configuration, reset the AP, unassoc, rxon timing, assoc, - * clear sta table, add BCAST sta... */ -} - -/* temporary */ -static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb); - -static int iwl4965_mac_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct iwl_priv *priv = hw->priv; - DECLARE_MAC_BUF(mac); - unsigned long flags; - int rc; - - if (conf == NULL) - return -EIO; - - if (priv->vif != vif) { - IWL_DEBUG_MAC80211("leave - priv->vif != vif\n"); - return 0; - } - - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS && - conf->changed & IEEE80211_IFCC_BEACON) { - struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); - if (!beacon) - return -ENOMEM; - rc = iwl4965_mac_beacon_update(hw, beacon); - if (rc) - return rc; - } - - if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) && - (!conf->ssid_len)) { - IWL_DEBUG_MAC80211 - ("Leaving in AP mode because HostAPD is not ready.\n"); - return 0; - } - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - mutex_lock(&priv->mutex); - - if (conf->bssid) - IWL_DEBUG_MAC80211("bssid: %s\n", - print_mac(mac, conf->bssid)); - -/* - * very dubious code was here; the probe filtering flag is never set: - * - if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) && - !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) { - */ - - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - if (!conf->bssid) { - conf->bssid = priv->mac_addr; - memcpy(priv->bssid, priv->mac_addr, ETH_ALEN); - IWL_DEBUG_MAC80211("bssid was set to: %s\n", - print_mac(mac, conf->bssid)); - } - if (priv->ibss_beacon) - dev_kfree_skb(priv->ibss_beacon); - - priv->ibss_beacon = ieee80211_beacon_get(hw, vif); - } - - if (iwl_is_rfkill(priv)) - goto done; - - if (conf->bssid && !is_zero_ether_addr(conf->bssid) && - !is_multicast_ether_addr(conf->bssid)) { - /* If there is currently a HW scan going on in the background - * then we need to cancel it else the RXON below will fail. */ - if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARNING("Aborted scan still in progress " - "after 100ms\n"); - IWL_DEBUG_MAC80211("leaving - scan abort failed.\n"); - mutex_unlock(&priv->mutex); - return -EAGAIN; - } - memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN); - - /* TODO: Audit driver for usage of these members and see - * if mac80211 deprecates them (priv->bssid looks like it - * shouldn't be there, but I haven't scanned the IBSS code - * to verify) - jpk */ - memcpy(priv->bssid, conf->bssid, ETH_ALEN); - - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) - iwl4965_config_ap(priv); - else { - rc = iwl4965_commit_rxon(priv); - if ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && rc) - iwl_rxon_add_station( - priv, priv->active_rxon.bssid_addr, 1); - } - - } else { - iwl_scan_cancel_timeout(priv, 100); - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl4965_commit_rxon(priv); - } - - done: - spin_lock_irqsave(&priv->lock, flags); - if (!conf->ssid_len) - memset(priv->essid, 0, IW_ESSID_MAX_SIZE); - else - memcpy(priv->essid, conf->ssid, conf->ssid_len); - - priv->essid_len = conf->ssid_len; - spin_unlock_irqrestore(&priv->lock, flags); - - IWL_DEBUG_MAC80211("leave\n"); - mutex_unlock(&priv->mutex); - - return 0; -} - -static void iwl4965_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, struct dev_addr_list *mc_list) -{ - struct iwl_priv *priv = hw->priv; - - if (changed_flags & (*total_flags) & FIF_OTHER_BSS) { - IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n", - IEEE80211_IF_TYPE_MNTR, - changed_flags, *total_flags); - /* queue work 'cuz mac80211 is holding a lock which - * prevents us from issuing (synchronous) f/w cmds */ - queue_work(priv->workqueue, &priv->set_monitor); - } - *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | - FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; -} - -static void iwl4965_mac_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211("enter\n"); - - mutex_lock(&priv->mutex); - - if (iwl_is_ready_rf(priv)) { - iwl_scan_cancel_timeout(priv, 100); - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl4965_commit_rxon(priv); - } - if (priv->vif == conf->vif) { - priv->vif = NULL; - memset(priv->bssid, 0, ETH_ALEN); - memset(priv->essid, 0, IW_ESSID_MAX_SIZE); - priv->essid_len = 0; - } - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211("leave\n"); - -} - -#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) -static void iwl4965_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changes) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211("changes = 0x%X\n", changes); - - if (changes & BSS_CHANGED_ERP_PREAMBLE) { - IWL_DEBUG_MAC80211("ERP_PREAMBLE %d\n", - bss_conf->use_short_preamble); - if (bss_conf->use_short_preamble) - priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; - else - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; - } - - if (changes & BSS_CHANGED_ERP_CTS_PROT) { - IWL_DEBUG_MAC80211("ERP_CTS %d\n", bss_conf->use_cts_prot); - if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ)) - priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK; - else - priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK; - } - - if (changes & BSS_CHANGED_HT) { - IWL_DEBUG_MAC80211("HT %d\n", bss_conf->assoc_ht); - iwl4965_ht_conf(priv, bss_conf); - iwl_set_rxon_chain(priv); - } - - if (changes & BSS_CHANGED_ASSOC) { - IWL_DEBUG_MAC80211("ASSOC %d\n", bss_conf->assoc); - /* This should never happen as this function should - * never be called from interrupt context. */ - if (WARN_ON_ONCE(in_interrupt())) - return; - if (bss_conf->assoc) { - priv->assoc_id = bss_conf->aid; - priv->beacon_int = bss_conf->beacon_int; - priv->power_data.dtim_period = bss_conf->dtim_period; - priv->timestamp = bss_conf->timestamp; - priv->assoc_capability = bss_conf->assoc_capability; - priv->next_scan_jiffies = jiffies + - IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; - mutex_lock(&priv->mutex); - iwl4965_post_associate(priv); - mutex_unlock(&priv->mutex); - } else { - priv->assoc_id = 0; - IWL_DEBUG_MAC80211("DISASSOC %d\n", bss_conf->assoc); - } - } else if (changes && iwl_is_associated(priv) && priv->assoc_id) { - IWL_DEBUG_MAC80211("Associated Changes %d\n", changes); - iwl_send_rxon_assoc(priv); - } - -} - -static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) -{ - int rc = 0; - unsigned long flags; - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211("enter\n"); - - mutex_lock(&priv->mutex); - spin_lock_irqsave(&priv->lock, flags); - - if (!iwl_is_ready_rf(priv)) { - rc = -EIO; - IWL_DEBUG_MAC80211("leave - not ready or exit pending\n"); - goto out_unlock; - } - - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { /* APs don't scan */ - rc = -EIO; - IWL_ERROR("ERROR: APs don't scan\n"); - goto out_unlock; - } - - /* we don't schedule scan within next_scan_jiffies period */ - if (priv->next_scan_jiffies && - time_after(priv->next_scan_jiffies, jiffies)) { - rc = -EAGAIN; - goto out_unlock; - } - /* if we just finished scan ask for delay */ - if (priv->last_scan_jiffies && time_after(priv->last_scan_jiffies + - IWL_DELAY_NEXT_SCAN, jiffies)) { - rc = -EAGAIN; - goto out_unlock; - } - if (len) { - IWL_DEBUG_SCAN("direct scan for %s [%d]\n ", - iwl_escape_essid(ssid, len), (int)len); - - priv->one_direct_scan = 1; - priv->direct_ssid_len = (u8) - min((u8) len, (u8) IW_ESSID_MAX_SIZE); - memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len); - } else - priv->one_direct_scan = 0; - - rc = iwl_scan_initiate(priv); - - IWL_DEBUG_MAC80211("leave\n"); - -out_unlock: - spin_unlock_irqrestore(&priv->lock, flags); - mutex_unlock(&priv->mutex); - - return rc; -} - -static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw, - struct ieee80211_key_conf *keyconf, const u8 *addr, - u32 iv32, u16 *phase1key) -{ - struct iwl_priv *priv = hw->priv; - u8 sta_id = IWL_INVALID_STATION; - unsigned long flags; - __le16 key_flags = 0; - int i; - DECLARE_MAC_BUF(mac); - - IWL_DEBUG_MAC80211("enter\n"); - - sta_id = iwl_find_station(priv, addr); - if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_MAC80211("leave - %s not in station map.\n", - print_mac(mac, addr)); - return; - } - - iwl_scan_cancel_timeout(priv, 100); - - key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); - key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); - key_flags &= ~STA_KEY_FLG_INVALID; - - if (sta_id == priv->hw_params.bcast_sta_id) - key_flags |= STA_KEY_MULTICAST_MSK; - - spin_lock_irqsave(&priv->sta_lock, flags); - - priv->stations[sta_id].sta.key.key_flags = key_flags; - priv->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32; - - for (i = 0; i < 5; i++) - priv->stations[sta_id].sta.key.tkip_rx_ttak[i] = - cpu_to_le16(phase1key[i]); - - priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - - iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); - - spin_unlock_irqrestore(&priv->sta_lock, flags); - - IWL_DEBUG_MAC80211("leave\n"); -} - -static int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_addr, const u8 *addr, - struct ieee80211_key_conf *key) -{ - struct iwl_priv *priv = hw->priv; - DECLARE_MAC_BUF(mac); - int ret = 0; - u8 sta_id = IWL_INVALID_STATION; - u8 is_default_wep_key = 0; - - IWL_DEBUG_MAC80211("enter\n"); - - if (priv->hw_params.sw_crypto) { - IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n"); - return -EOPNOTSUPP; - } - - if (is_zero_ether_addr(addr)) - /* only support pairwise keys */ - return -EOPNOTSUPP; - - sta_id = iwl_find_station(priv, addr); - if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_MAC80211("leave - %s not in station map.\n", - print_mac(mac, addr)); - return -EINVAL; - - } - - mutex_lock(&priv->mutex); - iwl_scan_cancel_timeout(priv, 100); - mutex_unlock(&priv->mutex); - - /* If we are getting WEP group key and we didn't receive any key mapping - * so far, we are in legacy wep mode (group key only), otherwise we are - * in 1X mode. - * In legacy wep mode, we use another host command to the uCode */ - if (key->alg == ALG_WEP && sta_id == priv->hw_params.bcast_sta_id && - priv->iw_mode != IEEE80211_IF_TYPE_AP) { - if (cmd == SET_KEY) - is_default_wep_key = !priv->key_mapping_key; - else - is_default_wep_key = - (key->hw_key_idx == HW_KEY_DEFAULT); - } - - switch (cmd) { - case SET_KEY: - if (is_default_wep_key) - ret = iwl_set_default_wep_key(priv, key); - else - ret = iwl_set_dynamic_key(priv, key, sta_id); - - IWL_DEBUG_MAC80211("enable hwcrypto key\n"); - break; - case DISABLE_KEY: - if (is_default_wep_key) - ret = iwl_remove_default_wep_key(priv, key); - else - ret = iwl_remove_dynamic_key(priv, key, sta_id); - - IWL_DEBUG_MAC80211("disable hwcrypto key\n"); - break; - default: - ret = -EINVAL; - } - - IWL_DEBUG_MAC80211("leave\n"); - - return ret; -} - -static int iwl4965_mac_conf_tx(struct ieee80211_hw *hw, u16 queue, - const struct ieee80211_tx_queue_params *params) -{ - struct iwl_priv *priv = hw->priv; - unsigned long flags; - int q; - - IWL_DEBUG_MAC80211("enter\n"); - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211("leave - RF not ready\n"); - return -EIO; - } - - if (queue >= AC_NUM) { - IWL_DEBUG_MAC80211("leave - queue >= AC_NUM %d\n", queue); - return 0; - } - - if (!priv->qos_data.qos_enable) { - priv->qos_data.qos_active = 0; - IWL_DEBUG_MAC80211("leave - qos not enabled\n"); - return 0; - } - q = AC_NUM - 1 - queue; - - spin_lock_irqsave(&priv->lock, flags); - - priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min); - priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max); - priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs; - priv->qos_data.def_qos_parm.ac[q].edca_txop = - cpu_to_le16((params->txop * 32)); - - priv->qos_data.def_qos_parm.ac[q].reserved1 = 0; - priv->qos_data.qos_active = 1; - - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) - iwl_activate_qos(priv, 1); - else if (priv->assoc_id && iwl_is_associated(priv)) - iwl_activate_qos(priv, 0); - - spin_unlock_irqrestore(&priv->lock, flags); - - IWL_DEBUG_MAC80211("leave\n"); - return 0; -} - -static int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, - enum ieee80211_ampdu_mlme_action action, - const u8 *addr, u16 tid, u16 *ssn) -{ - struct iwl_priv *priv = hw->priv; - DECLARE_MAC_BUF(mac); - - IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n", - print_mac(mac, addr), tid); - - if (!(priv->cfg->sku & IWL_SKU_N)) - return -EACCES; - - switch (action) { - case IEEE80211_AMPDU_RX_START: - IWL_DEBUG_HT("start Rx\n"); - return iwl_rx_agg_start(priv, addr, tid, *ssn); - case IEEE80211_AMPDU_RX_STOP: - IWL_DEBUG_HT("stop Rx\n"); - return iwl_rx_agg_stop(priv, addr, tid); - case IEEE80211_AMPDU_TX_START: - IWL_DEBUG_HT("start Tx\n"); - return iwl_tx_agg_start(priv, addr, tid, ssn); - case IEEE80211_AMPDU_TX_STOP: - IWL_DEBUG_HT("stop Tx\n"); - return iwl_tx_agg_stop(priv, addr, tid); - default: - IWL_DEBUG_HT("unknown\n"); - return -EINVAL; - break; - } - return 0; -} -static int iwl4965_mac_get_tx_stats(struct ieee80211_hw *hw, - struct ieee80211_tx_queue_stats *stats) -{ - struct iwl_priv *priv = hw->priv; - int i, avail; - struct iwl_tx_queue *txq; - struct iwl_queue *q; - unsigned long flags; - - IWL_DEBUG_MAC80211("enter\n"); - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211("leave - RF not ready\n"); - return -EIO; - } - - spin_lock_irqsave(&priv->lock, flags); - - for (i = 0; i < AC_NUM; i++) { - txq = &priv->txq[i]; - q = &txq->q; - avail = iwl_queue_space(q); - - stats[i].len = q->n_window - avail; - stats[i].limit = q->n_window - q->high_mark; - stats[i].count = q->n_window; - - } - spin_unlock_irqrestore(&priv->lock, flags); - - IWL_DEBUG_MAC80211("leave\n"); - - return 0; -} - -static int iwl4965_mac_get_stats(struct ieee80211_hw *hw, - struct ieee80211_low_level_stats *stats) -{ - struct iwl_priv *priv = hw->priv; - - priv = hw->priv; - IWL_DEBUG_MAC80211("enter\n"); - IWL_DEBUG_MAC80211("leave\n"); - - return 0; -} - -static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - unsigned long flags; - - mutex_lock(&priv->mutex); - IWL_DEBUG_MAC80211("enter\n"); - - spin_lock_irqsave(&priv->lock, flags); - memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info)); - spin_unlock_irqrestore(&priv->lock, flags); - - iwl_reset_qos(priv); - - spin_lock_irqsave(&priv->lock, flags); - priv->assoc_id = 0; - priv->assoc_capability = 0; - priv->assoc_station_added = 0; - - /* new association get rid of ibss beacon skb */ - if (priv->ibss_beacon) - dev_kfree_skb(priv->ibss_beacon); - - priv->ibss_beacon = NULL; - - priv->beacon_int = priv->hw->conf.beacon_int; - priv->timestamp = 0; - if ((priv->iw_mode == IEEE80211_IF_TYPE_STA)) - priv->beacon_int = 0; - - spin_unlock_irqrestore(&priv->lock, flags); - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211("leave - not ready\n"); - mutex_unlock(&priv->mutex); - return; - } - - /* we are restarting association process - * clear RXON_FILTER_ASSOC_MSK bit - */ - if (priv->iw_mode != IEEE80211_IF_TYPE_AP) { - iwl_scan_cancel_timeout(priv, 100); - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl4965_commit_rxon(priv); - } - - iwl_power_update_mode(priv, 0); - - /* Per mac80211.h: This is only used in IBSS mode... */ - if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { - - IWL_DEBUG_MAC80211("leave - not in IBSS\n"); - mutex_unlock(&priv->mutex); - return; - } - - iwl4965_set_rate(priv); - - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211("leave\n"); -} - -static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct iwl_priv *priv = hw->priv; - unsigned long flags; - __le64 timestamp; - - mutex_lock(&priv->mutex); - IWL_DEBUG_MAC80211("enter\n"); - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211("leave - RF not ready\n"); - mutex_unlock(&priv->mutex); - return -EIO; - } - - if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { - IWL_DEBUG_MAC80211("leave - not IBSS\n"); - mutex_unlock(&priv->mutex); - return -EIO; - } - - spin_lock_irqsave(&priv->lock, flags); - - if (priv->ibss_beacon) - dev_kfree_skb(priv->ibss_beacon); - - priv->ibss_beacon = skb; - - priv->assoc_id = 0; - timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp; - priv->timestamp = le64_to_cpu(timestamp) + (priv->beacon_int * 1000); - - IWL_DEBUG_MAC80211("leave\n"); - spin_unlock_irqrestore(&priv->lock, flags); - - iwl_reset_qos(priv); - - iwl4965_post_associate(priv); - - mutex_unlock(&priv->mutex); - - return 0; -} - -/***************************************************************************** - * - * sysfs attributes - * - *****************************************************************************/ - -#ifdef CONFIG_IWLWIFI_DEBUG - -/* - * The following adds a new attribute to the sysfs representation - * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/) - * used for controlling the debug level. - * - * See the level definitions in iwl for details. - */ - -static ssize_t show_debug_level(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = d->driver_data; - - return sprintf(buf, "0x%08X\n", priv->debug_level); -} -static ssize_t store_debug_level(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = d->driver_data; - char *p = (char *)buf; - u32 val; - - val = simple_strtoul(p, &p, 0); - if (p == buf) - printk(KERN_INFO DRV_NAME - ": %s is not in hex or decimal form.\n", buf); - else - priv->debug_level = val; - - return strnlen(buf, count); -} - -static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, - show_debug_level, store_debug_level); - - -#endif /* CONFIG_IWLWIFI_DEBUG */ - - -static ssize_t show_version(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = d->driver_data; - struct iwl_alive_resp *palive = &priv->card_alive; - ssize_t pos = 0; - u16 eeprom_ver; - - if (palive->is_valid) - pos += sprintf(buf + pos, - "fw version: 0x%01X.0x%01X.0x%01X.0x%01X\n" - "fw type: 0x%01X 0x%01X\n", - palive->ucode_major, palive->ucode_minor, - palive->sw_rev[0], palive->sw_rev[1], - palive->ver_type, palive->ver_subtype); - else - pos += sprintf(buf + pos, "fw not loaded\n"); - - if (priv->eeprom) { - eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION); - pos += sprintf(buf + pos, "EEPROM version: 0x%x\n", - eeprom_ver); - } else { - pos += sprintf(buf + pos, "EEPROM not initialzed\n"); - } - - return pos; -} - -static DEVICE_ATTR(version, S_IWUSR | S_IRUGO, show_version, NULL); - -static ssize_t show_temperature(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - return sprintf(buf, "%d\n", priv->temperature); -} - -static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); - -static ssize_t show_tx_power(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - return sprintf(buf, "%d\n", priv->tx_power_user_lmt); -} - -static ssize_t store_tx_power(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - char *p = (char *)buf; - u32 val; - - val = simple_strtoul(p, &p, 10); - if (p == buf) - printk(KERN_INFO DRV_NAME - ": %s is not in decimal form.\n", buf); - else - iwl_set_tx_power(priv, val, false); - - return count; -} - -static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power); - -static ssize_t show_flags(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - - return sprintf(buf, "0x%04X\n", priv->active_rxon.flags); -} - -static ssize_t store_flags(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - u32 flags = simple_strtoul(buf, NULL, 0); - - mutex_lock(&priv->mutex); - if (le32_to_cpu(priv->staging_rxon.flags) != flags) { - /* Cancel any currently running scans... */ - if (iwl_scan_cancel_timeout(priv, 100)) - IWL_WARNING("Could not cancel scan.\n"); - else { - IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n", - flags); - priv->staging_rxon.flags = cpu_to_le32(flags); - iwl4965_commit_rxon(priv); - } - } - mutex_unlock(&priv->mutex); - - return count; -} - -static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags); - -static ssize_t show_filter_flags(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - - return sprintf(buf, "0x%04X\n", - le32_to_cpu(priv->active_rxon.filter_flags)); -} - -static ssize_t store_filter_flags(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - u32 filter_flags = simple_strtoul(buf, NULL, 0); - - mutex_lock(&priv->mutex); - if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) { - /* Cancel any currently running scans... */ - if (iwl_scan_cancel_timeout(priv, 100)) - IWL_WARNING("Could not cancel scan.\n"); - else { - IWL_DEBUG_INFO("Committing rxon.filter_flags = " - "0x%04X\n", filter_flags); - priv->staging_rxon.filter_flags = - cpu_to_le32(filter_flags); - iwl4965_commit_rxon(priv); - } - } - mutex_unlock(&priv->mutex); - - return count; -} - -static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags, - store_filter_flags); - -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT - -static ssize_t show_measurement(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - struct iwl4965_spectrum_notification measure_report; - u32 size = sizeof(measure_report), len = 0, ofs = 0; - u8 *data = (u8 *) & measure_report; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - if (!(priv->measurement_status & MEASUREMENT_READY)) { - spin_unlock_irqrestore(&priv->lock, flags); - return 0; - } - memcpy(&measure_report, &priv->measure_report, size); - priv->measurement_status = 0; - spin_unlock_irqrestore(&priv->lock, flags); - - while (size && (PAGE_SIZE - len)) { - hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len, - PAGE_SIZE - len, 1); - len = strlen(buf); - if (PAGE_SIZE - len) - buf[len++] = '\n'; - - ofs += 16; - size -= min(size, 16U); - } - - return len; -} - -static ssize_t store_measurement(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - struct ieee80211_measurement_params params = { - .channel = le16_to_cpu(priv->active_rxon.channel), - .start_time = cpu_to_le64(priv->last_tsf), - .duration = cpu_to_le16(1), - }; - u8 type = IWL_MEASURE_BASIC; - u8 buffer[32]; - u8 channel; - - if (count) { - char *p = buffer; - strncpy(buffer, buf, min(sizeof(buffer), count)); - channel = simple_strtoul(p, NULL, 0); - if (channel) - params.channel = channel; - - p = buffer; - while (*p && *p != ' ') - p++; - if (*p) - type = simple_strtoul(p + 1, NULL, 0); - } - - IWL_DEBUG_INFO("Invoking measurement of type %d on " - "channel %d (for '%s')\n", type, params.channel, buf); - iwl4965_get_measurement(priv, ¶ms, type); - - return count; -} - -static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR, - show_measurement, store_measurement); -#endif /* CONFIG_IWL4965_SPECTRUM_MEASUREMENT */ - -static ssize_t store_retry_rate(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - - priv->retry_rate = simple_strtoul(buf, NULL, 0); - if (priv->retry_rate <= 0) - priv->retry_rate = 1; - - return count; -} - -static ssize_t show_retry_rate(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - return sprintf(buf, "%d", priv->retry_rate); -} - -static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate, - store_retry_rate); - -static ssize_t store_power_level(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - int ret; - int mode; - - mode = simple_strtoul(buf, NULL, 0); - mutex_lock(&priv->mutex); - - if (!iwl_is_ready(priv)) { - ret = -EAGAIN; - goto out; - } - - ret = iwl_power_set_user_mode(priv, mode); - if (ret) { - IWL_DEBUG_MAC80211("failed setting power mode.\n"); - goto out; - } - ret = count; - - out: - mutex_unlock(&priv->mutex); - return ret; -} - -static ssize_t show_power_level(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - int mode = priv->power_data.user_power_setting; - int system = priv->power_data.system_power_setting; - int level = priv->power_data.power_mode; - char *p = buf; - - switch (system) { - case IWL_POWER_SYS_AUTO: - p += sprintf(p, "SYSTEM:auto"); - break; - case IWL_POWER_SYS_AC: - p += sprintf(p, "SYSTEM:ac"); - break; - case IWL_POWER_SYS_BATTERY: - p += sprintf(p, "SYSTEM:battery"); - break; - } - - p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO)?"fixed":"auto"); - p += sprintf(p, "\tINDEX:%d", level); - p += sprintf(p, "\n"); - return (p - buf + 1); -} - -static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level, - store_power_level); - -static ssize_t show_channels(struct device *d, - struct device_attribute *attr, char *buf) -{ - - struct iwl_priv *priv = dev_get_drvdata(d); - struct ieee80211_channel *channels = NULL; - const struct ieee80211_supported_band *supp_band = NULL; - int len = 0, i; - int count = 0; - - if (!test_bit(STATUS_GEO_CONFIGURED, &priv->status)) - return -EAGAIN; - - supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_2GHZ); - channels = supp_band->channels; - count = supp_band->n_channels; - - len += sprintf(&buf[len], - "Displaying %d channels in 2.4GHz band " - "(802.11bg):\n", count); - - for (i = 0; i < count; i++) - len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n", - ieee80211_frequency_to_channel( - channels[i].center_freq), - channels[i].max_power, - channels[i].flags & IEEE80211_CHAN_RADAR ? - " (IEEE 802.11h required)" : "", - (!(channels[i].flags & IEEE80211_CHAN_NO_IBSS) - || (channels[i].flags & - IEEE80211_CHAN_RADAR)) ? "" : - ", IBSS", - channels[i].flags & - IEEE80211_CHAN_PASSIVE_SCAN ? - "passive only" : "active/passive"); - - supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_5GHZ); - channels = supp_band->channels; - count = supp_band->n_channels; - - len += sprintf(&buf[len], "Displaying %d channels in 5.2GHz band " - "(802.11a):\n", count); - - for (i = 0; i < count; i++) - len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n", - ieee80211_frequency_to_channel( - channels[i].center_freq), - channels[i].max_power, - channels[i].flags & IEEE80211_CHAN_RADAR ? - " (IEEE 802.11h required)" : "", - ((channels[i].flags & IEEE80211_CHAN_NO_IBSS) - || (channels[i].flags & - IEEE80211_CHAN_RADAR)) ? "" : - ", IBSS", - channels[i].flags & - IEEE80211_CHAN_PASSIVE_SCAN ? - "passive only" : "active/passive"); - - return len; -} - -static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL); - -static ssize_t show_statistics(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - u32 size = sizeof(struct iwl_notif_statistics); - u32 len = 0, ofs = 0; - u8 *data = (u8 *) & priv->statistics; - int rc = 0; - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - mutex_lock(&priv->mutex); - rc = iwl_send_statistics_request(priv, 0); - mutex_unlock(&priv->mutex); - - if (rc) { - len = sprintf(buf, - "Error sending statistics request: 0x%08X\n", rc); - return len; - } - - while (size && (PAGE_SIZE - len)) { - hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len, - PAGE_SIZE - len, 1); - len = strlen(buf); - if (PAGE_SIZE - len) - buf[len++] = '\n'; - - ofs += 16; - size -= min(size, 16U); - } - - return len; -} - -static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL); - -static ssize_t show_status(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - if (!iwl_is_alive(priv)) - return -EAGAIN; - return sprintf(buf, "0x%08x\n", (int)priv->status); -} - -static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); - -/***************************************************************************** - * - * driver setup and teardown - * - *****************************************************************************/ - -static void iwl_setup_deferred_work(struct iwl_priv *priv) -{ - priv->workqueue = create_workqueue(DRV_NAME); - - init_waitqueue_head(&priv->wait_command_queue); - - INIT_WORK(&priv->up, iwl4965_bg_up); - INIT_WORK(&priv->restart, iwl4965_bg_restart); - INIT_WORK(&priv->rx_replenish, iwl4965_bg_rx_replenish); - INIT_WORK(&priv->rf_kill, iwl4965_bg_rf_kill); - INIT_WORK(&priv->beacon_update, iwl4965_bg_beacon_update); - INIT_WORK(&priv->set_monitor, iwl4965_bg_set_monitor); - INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work); - INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start); - INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start); - - /* FIXME : remove when resolved PENDING */ - INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); - iwl_setup_scan_deferred_work(priv); - - if (priv->cfg->ops->lib->setup_deferred_work) - priv->cfg->ops->lib->setup_deferred_work(priv); - - init_timer(&priv->statistics_periodic); - priv->statistics_periodic.data = (unsigned long)priv; - priv->statistics_periodic.function = iwl4965_bg_statistics_periodic; - - tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) - iwl4965_irq_tasklet, (unsigned long)priv); -} - -static void iwl_cancel_deferred_work(struct iwl_priv *priv) -{ - if (priv->cfg->ops->lib->cancel_deferred_work) - priv->cfg->ops->lib->cancel_deferred_work(priv); - - cancel_delayed_work_sync(&priv->init_alive_start); - cancel_delayed_work(&priv->scan_check); - cancel_delayed_work(&priv->alive_start); - cancel_work_sync(&priv->beacon_update); - del_timer_sync(&priv->statistics_periodic); -} - -static struct attribute *iwl4965_sysfs_entries[] = { - &dev_attr_channels.attr, - &dev_attr_flags.attr, - &dev_attr_filter_flags.attr, -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT - &dev_attr_measurement.attr, -#endif - &dev_attr_power_level.attr, - &dev_attr_retry_rate.attr, - &dev_attr_statistics.attr, - &dev_attr_status.attr, - &dev_attr_temperature.attr, - &dev_attr_tx_power.attr, -#ifdef CONFIG_IWLWIFI_DEBUG - &dev_attr_debug_level.attr, -#endif - &dev_attr_version.attr, - - NULL -}; - -static struct attribute_group iwl4965_attribute_group = { - .name = NULL, /* put in device directory */ - .attrs = iwl4965_sysfs_entries, -}; - -static struct ieee80211_ops iwl4965_hw_ops = { - .tx = iwl4965_mac_tx, - .start = iwl4965_mac_start, - .stop = iwl4965_mac_stop, - .add_interface = iwl4965_mac_add_interface, - .remove_interface = iwl4965_mac_remove_interface, - .config = iwl4965_mac_config, - .config_interface = iwl4965_mac_config_interface, - .configure_filter = iwl4965_configure_filter, - .set_key = iwl4965_mac_set_key, - .update_tkip_key = iwl4965_mac_update_tkip_key, - .get_stats = iwl4965_mac_get_stats, - .get_tx_stats = iwl4965_mac_get_tx_stats, - .conf_tx = iwl4965_mac_conf_tx, - .reset_tsf = iwl4965_mac_reset_tsf, - .bss_info_changed = iwl4965_bss_info_changed, - .ampdu_action = iwl4965_mac_ampdu_action, - .hw_scan = iwl4965_mac_hw_scan -}; - -static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - int err = 0; - struct iwl_priv *priv; - struct ieee80211_hw *hw; - struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data); - unsigned long flags; - DECLARE_MAC_BUF(mac); - - /************************ - * 1. Allocating HW data - ************************/ - - /* Disabling hardware scan means that mac80211 will perform scans - * "the hard way", rather than using device's scan. */ - if (cfg->mod_params->disable_hw_scan) { - if (cfg->mod_params->debug & IWL_DL_INFO) - dev_printk(KERN_DEBUG, &(pdev->dev), - "Disabling hw_scan\n"); - iwl4965_hw_ops.hw_scan = NULL; - } - - hw = iwl_alloc_all(cfg, &iwl4965_hw_ops); - if (!hw) { - err = -ENOMEM; - goto out; - } - priv = hw->priv; - /* At this point both hw and priv are allocated. */ - - SET_IEEE80211_DEV(hw, &pdev->dev); - - IWL_DEBUG_INFO("*** LOAD DRIVER ***\n"); - priv->cfg = cfg; - priv->pci_dev = pdev; - -#ifdef CONFIG_IWLWIFI_DEBUG - priv->debug_level = priv->cfg->mod_params->debug; - atomic_set(&priv->restrict_refcnt, 0); -#endif - - /************************** - * 2. Initializing PCI bus - **************************/ - if (pci_enable_device(pdev)) { - err = -ENODEV; - goto out_ieee80211_free_hw; - } - - pci_set_master(pdev); - - err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); - if (!err) - err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); - if (err) { - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (!err) - err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - /* both attempts failed: */ - if (err) { - printk(KERN_WARNING "%s: No suitable DMA available.\n", - DRV_NAME); - goto out_pci_disable_device; - } - } - - err = pci_request_regions(pdev, DRV_NAME); - if (err) - goto out_pci_disable_device; - - pci_set_drvdata(pdev, priv); - - /* We disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state */ - pci_write_config_byte(pdev, 0x41, 0x00); - - /*********************** - * 3. Read REV register - ***********************/ - priv->hw_base = pci_iomap(pdev, 0, 0); - if (!priv->hw_base) { - err = -ENODEV; - goto out_pci_release_regions; - } - - IWL_DEBUG_INFO("pci_resource_len = 0x%08llx\n", - (unsigned long long) pci_resource_len(pdev, 0)); - IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base); - - iwl_hw_detect(priv); - printk(KERN_INFO DRV_NAME - ": Detected Intel Wireless WiFi Link %s REV=0x%X\n", - priv->cfg->name, priv->hw_rev); - - /* amp init */ - err = priv->cfg->ops->lib->apm_ops.init(priv); - if (err < 0) { - IWL_DEBUG_INFO("Failed to init APMG\n"); - goto out_iounmap; - } - /***************** - * 4. Read EEPROM - *****************/ - /* Read the EEPROM */ - err = iwl_eeprom_init(priv); - if (err) { - IWL_ERROR("Unable to init EEPROM\n"); - goto out_iounmap; - } - err = iwl_eeprom_check_version(priv); - if (err) - goto out_iounmap; - - /* extract MAC Address */ - iwl_eeprom_get_mac(priv, priv->mac_addr); - IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr)); - SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); - - /************************ - * 5. Setup HW constants - ************************/ - if (iwl_set_hw_params(priv)) { - IWL_ERROR("failed to set hw parameters\n"); - goto out_free_eeprom; - } - - /******************* - * 6. Setup priv - *******************/ - - err = iwl_init_drv(priv); - if (err) - goto out_free_eeprom; - /* At this point both hw and priv are initialized. */ - - /********************************** - * 7. Initialize module parameters - **********************************/ - - /* Disable radio (SW RF KILL) via parameter when loading driver */ - if (priv->cfg->mod_params->disable) { - set_bit(STATUS_RF_KILL_SW, &priv->status); - IWL_DEBUG_INFO("Radio disabled.\n"); - } - - /******************** - * 8. Setup services - ********************/ - spin_lock_irqsave(&priv->lock, flags); - iwl4965_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - err = sysfs_create_group(&pdev->dev.kobj, &iwl4965_attribute_group); - if (err) { - IWL_ERROR("failed to create sysfs device attributes\n"); - goto out_uninit_drv; - } - - - iwl_setup_deferred_work(priv); - iwl_setup_rx_handlers(priv); - - /******************** - * 9. Conclude - ********************/ - pci_save_state(pdev); - pci_disable_device(pdev); - - /********************************** - * 10. Setup and register mac80211 - **********************************/ - - err = iwl_setup_mac(priv); - if (err) - goto out_remove_sysfs; - - err = iwl_dbgfs_register(priv, DRV_NAME); - if (err) - IWL_ERROR("failed to create debugfs files\n"); - - err = iwl_rfkill_init(priv); - if (err) - IWL_ERROR("Unable to initialize RFKILL system. " - "Ignoring error: %d\n", err); - iwl_power_initialize(priv); - return 0; - - out_remove_sysfs: - sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group); - out_uninit_drv: - iwl_uninit_drv(priv); - out_free_eeprom: - iwl_eeprom_free(priv); - out_iounmap: - pci_iounmap(pdev, priv->hw_base); - out_pci_release_regions: - pci_release_regions(pdev); - pci_set_drvdata(pdev, NULL); - out_pci_disable_device: - pci_disable_device(pdev); - out_ieee80211_free_hw: - ieee80211_free_hw(priv->hw); - out: - return err; -} - -static void __devexit iwl4965_pci_remove(struct pci_dev *pdev) -{ - struct iwl_priv *priv = pci_get_drvdata(pdev); - unsigned long flags; - - if (!priv) - return; - - IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n"); - - iwl_dbgfs_unregister(priv); - sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group); - - if (priv->mac80211_registered) { - ieee80211_unregister_hw(priv->hw); - priv->mac80211_registered = 0; - } - - set_bit(STATUS_EXIT_PENDING, &priv->status); - - iwl4965_down(priv); - - /* make sure we flush any pending irq or - * tasklet for the driver - */ - spin_lock_irqsave(&priv->lock, flags); - iwl4965_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - iwl_synchronize_irq(priv); - - iwl_rfkill_unregister(priv); - iwl4965_dealloc_ucode_pci(priv); - - if (priv->rxq.bd) - iwl_rx_queue_free(priv, &priv->rxq); - iwl_hw_txq_ctx_free(priv); - - iwl_clear_stations_table(priv); - iwl_eeprom_free(priv); - - - /*netif_stop_queue(dev); */ - flush_workqueue(priv->workqueue); - - /* ieee80211_unregister_hw calls iwl4965_mac_stop, which flushes - * priv->workqueue... so we can't take down the workqueue - * until now... */ - destroy_workqueue(priv->workqueue); - priv->workqueue = NULL; - - pci_iounmap(pdev, priv->hw_base); - pci_release_regions(pdev); - pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); - - iwl_uninit_drv(priv); - - if (priv->ibss_beacon) - dev_kfree_skb(priv->ibss_beacon); - - ieee80211_free_hw(priv->hw); -} - -#ifdef CONFIG_PM - -static int iwl4965_pci_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct iwl_priv *priv = pci_get_drvdata(pdev); - - if (priv->is_open) { - set_bit(STATUS_IN_SUSPEND, &priv->status); - iwl4965_mac_stop(priv->hw); - priv->is_open = 1; - } - - pci_set_power_state(pdev, PCI_D3hot); - - return 0; -} - -static int iwl4965_pci_resume(struct pci_dev *pdev) -{ - struct iwl_priv *priv = pci_get_drvdata(pdev); - - pci_set_power_state(pdev, PCI_D0); - - if (priv->is_open) - iwl4965_mac_start(priv->hw); - - clear_bit(STATUS_IN_SUSPEND, &priv->status); - return 0; -} - -#endif /* CONFIG_PM */ - -/***************************************************************************** - * - * driver and module entry point - * - *****************************************************************************/ - -/* Hardware specific file defines the PCI IDs table for that hardware module */ -static struct pci_device_id iwl_hw_card_ids[] = { - {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)}, - {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)}, -#ifdef CONFIG_IWL5000 - {IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bg_cfg)}, - {IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bg_cfg)}, - {IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)}, - {IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)}, - {IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)}, - {IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)}, - {IWL_PCI_DEVICE(0x4232, PCI_ANY_ID, iwl5100_agn_cfg)}, - {IWL_PCI_DEVICE(0x4235, PCI_ANY_ID, iwl5300_agn_cfg)}, - {IWL_PCI_DEVICE(0x4236, PCI_ANY_ID, iwl5300_agn_cfg)}, - {IWL_PCI_DEVICE(0x4237, PCI_ANY_ID, iwl5100_agn_cfg)}, - {IWL_PCI_DEVICE(0x423A, PCI_ANY_ID, iwl5350_agn_cfg)}, -#endif /* CONFIG_IWL5000 */ - {0} -}; -MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids); - -static struct pci_driver iwl_driver = { - .name = DRV_NAME, - .id_table = iwl_hw_card_ids, - .probe = iwl4965_pci_probe, - .remove = __devexit_p(iwl4965_pci_remove), -#ifdef CONFIG_PM - .suspend = iwl4965_pci_suspend, - .resume = iwl4965_pci_resume, -#endif -}; - -static int __init iwl4965_init(void) -{ - - int ret; - printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n"); - printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n"); - - ret = iwlagn_rate_control_register(); - if (ret) { - IWL_ERROR("Unable to register rate control algorithm: %d\n", ret); - return ret; - } - - ret = pci_register_driver(&iwl_driver); - if (ret) { - IWL_ERROR("Unable to initialize PCI module\n"); - goto error_register; - } - - return ret; - -error_register: - iwlagn_rate_control_unregister(); - return ret; -} - -static void __exit iwl4965_exit(void) -{ - pci_unregister_driver(&iwl_driver); - iwlagn_rate_control_unregister(); -} - -module_exit(iwl4965_exit); -module_init(iwl4965_init); -- cgit v1.2.3 From 3ac7f14694dd38273d9d96f1c873233d71190c15 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 21 Jul 2008 02:40:14 +0300 Subject: iwlwifi: fix checkpatch.pl errors This patch fixes errors reported by checkpatch in iwlwifi drivers Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945.c | 7 ++-- drivers/net/wireless/iwlwifi/iwl-4965.c | 4 +-- drivers/net/wireless/iwlwifi/iwl-5000.c | 2 +- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 16 ++++----- drivers/net/wireless/iwlwifi/iwl-agn.c | 10 +++--- drivers/net/wireless/iwlwifi/iwl-core.c | 4 +-- drivers/net/wireless/iwlwifi/iwl-debug.h | 4 +-- drivers/net/wireless/iwlwifi/iwl-debugfs.c | 11 +++--- drivers/net/wireless/iwlwifi/iwl-eeprom.c | 3 +- drivers/net/wireless/iwlwifi/iwl-sta.c | 2 +- drivers/net/wireless/iwlwifi/iwl3945-base.c | 52 +++++++++++++---------------- 11 files changed, 55 insertions(+), 60 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 56a9361a847f..b3931f6135a4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -795,8 +795,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)header; __le32 *pos; - pos = - (__le32 *) & mgmt->u.beacon. + pos = (__le32 *)&mgmt->u.beacon. timestamp; priv->timestamp0 = le32_to_cpu(pos[0]); priv->timestamp1 = le32_to_cpu(pos[1]); @@ -1509,7 +1508,7 @@ static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading) */ static inline int iwl3945_hw_reg_temp_out_of_range(int temperature) { - return (((temperature < -260) || (temperature > 25)) ? 1 : 0); + return ((temperature < -260) || (temperature > 25)) ? 1 : 0; } int iwl3945_hw_get_temperature(struct iwl3945_priv *priv) @@ -2630,7 +2629,7 @@ unsigned int iwl3945_hw_get_beacon_cmd(struct iwl3945_priv *priv, tx_beacon_cmd->tx.supp_rates[1] = (IWL_CCK_BASIC_RATES_MASK & 0xF); - return (sizeof(struct iwl3945_tx_beacon_cmd) + frame_size); + return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size; } void iwl3945_hw_rx_handler_setup(struct iwl3945_priv *priv) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index f356f4f0944b..718f9d9e4947 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -1515,11 +1515,11 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, c, atten_value, power_index, tx_power.s.radio_tx_gain[c], tx_power.s.dsp_predis_atten[c]); - }/* for each chain */ + } /* for each chain */ tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw); - }/* for each rate */ + } /* for each rate */ return 0; } diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 076d3560302b..f7bbd12193f9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1131,7 +1131,7 @@ static void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask) static inline u32 iwl5000_get_scd_ssn(struct iwl5000_tx_resp *tx_resp) { - return le32_to_cpup((__le32*)&tx_resp->status + + return le32_to_cpup((__le32 *)&tx_resp->status + tx_resp->frame_count) & MAX_SN; } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index b498b58d81fa..754fef5b592f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -245,7 +245,7 @@ static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window) static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) { - return ((ant_type & valid_antenna) == ant_type); + return (ant_type & valid_antenna) == ant_type; } /* @@ -384,9 +384,9 @@ static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, static inline int get_num_of_ant_from_rate(u32 rate_n_flags) { - return (!!(rate_n_flags & RATE_MCS_ANT_A_MSK) + - !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + - !!(rate_n_flags & RATE_MCS_ANT_C_MSK)); + return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_C_MSK); } /** @@ -620,9 +620,9 @@ static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, #if 0 static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf) { - return ((conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) && + return (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) && priv->current_ht_config.is_green_field && - !priv->current_ht_config.non_GF_STA_present); + !priv->current_ht_config.non_GF_STA_present; } #endif static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf) @@ -2157,7 +2157,7 @@ static void *rs_alloc_sta(void *priv_rate, gfp_t gfp) for (j = 0; j < LQ_SIZE; j++) for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i])); + rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); return lq_sta; } @@ -2179,7 +2179,7 @@ static void rs_rate_init(void *priv_rate, void *priv_sta, sta->txrate_idx = 3; for (j = 0; j < LQ_SIZE; j++) for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i])); + rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); IWL_DEBUG_RATE("LQ: *** rate scale global init ***\n"); /* TODO: what is a good starting rate for STA? About middle? Maybe not diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index f71b3f3f81ba..4ff0636dbddc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2476,7 +2476,7 @@ static void iwl4965_post_associate(struct iwl_priv *priv) unsigned long flags; if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__); + IWL_ERROR("%s Should not be called in AP mode\n", __func__); return; } @@ -2552,7 +2552,7 @@ static void iwl4965_post_associate(struct iwl_priv *priv) default: IWL_ERROR("%s Should not be called in %d mode\n", - __FUNCTION__, priv->iw_mode); + __func__, priv->iw_mode); break; } @@ -3794,7 +3794,7 @@ static ssize_t show_measurement(struct device *d, struct iwl_priv *priv = dev_get_drvdata(d); struct iwl4965_spectrum_notification measure_report; u32 size = sizeof(measure_report), len = 0, ofs = 0; - u8 *data = (u8 *) & measure_report; + u8 *data = (u8 *)&measure_report; unsigned long flags; spin_lock_irqsave(&priv->lock, flags); @@ -3934,7 +3934,7 @@ static ssize_t show_power_level(struct device *d, p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO)?"fixed":"auto"); p += sprintf(p, "\tINDEX:%d", level); p += sprintf(p, "\n"); - return (p - buf + 1); + return p - buf + 1; } static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level, @@ -4009,7 +4009,7 @@ static ssize_t show_statistics(struct device *d, struct iwl_priv *priv = dev_get_drvdata(d); u32 size = sizeof(struct iwl_notif_statistics); u32 len = 0, ofs = 0; - u8 *data = (u8 *) & priv->statistics; + u8 *data = (u8 *)&priv->statistics; int rc = 0; if (!iwl_is_alive(priv)) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 96beacf703a6..9bd61809129f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -383,8 +383,8 @@ void iwl_reset_qos(struct iwl_priv *priv) } EXPORT_SYMBOL(iwl_reset_qos); -#define MAX_BIT_RATE_40_MHZ 0x96; /* 150 Mbps */ -#define MAX_BIT_RATE_20_MHZ 0x48; /* 72 Mbps */ +#define MAX_BIT_RATE_40_MHZ 0x96 /* 150 Mbps */ +#define MAX_BIT_RATE_20_MHZ 0x48 /* 72 Mbps */ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv, struct ieee80211_ht_info *ht_info, enum ieee80211_band band) diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h index d6d729e86bdb..b4ffd33ef98c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debug.h +++ b/drivers/net/wireless/iwlwifi/iwl-debug.h @@ -33,12 +33,12 @@ #define IWL_DEBUG(level, fmt, args...) \ do { if (priv->debug_level & (level)) \ dev_printk(KERN_ERR, &(priv->hw->wiphy->dev), "%c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) + in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) #define IWL_DEBUG_LIMIT(level, fmt, args...) \ do { if ((priv->debug_level & (level)) && net_ratelimit()) \ dev_printk(KERN_ERR, &(priv->hw->wiphy->dev), "%c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) + in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) #ifdef CONFIG_IWLWIFI_DEBUGFS struct iwl_debugfs { diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c index ed948dc59b3d..20db0eb636a8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c +++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c @@ -231,7 +231,7 @@ static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf, DECLARE_MAC_BUF(mac); buf = kmalloc(bufsz, GFP_KERNEL); - if(!buf) + if (!buf) return -ENOMEM; pos += scnprintf(buf + pos, bufsz - pos, "num of stations: %d\n\n", @@ -364,16 +364,19 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name) { struct iwl_debugfs *dbgfs; struct dentry *phyd = priv->hw->wiphy->debugfsdir; + int ret = 0; dbgfs = kzalloc(sizeof(struct iwl_debugfs), GFP_KERNEL); if (!dbgfs) { + ret = -ENOMEM; goto err; } priv->dbgfs = dbgfs; dbgfs->name = name; dbgfs->dir_drv = debugfs_create_dir(name, phyd); - if (!dbgfs->dir_drv || IS_ERR(dbgfs->dir_drv)){ + if (!dbgfs->dir_drv || IS_ERR(dbgfs->dir_drv)) { + ret = -ENOENT; goto err; } @@ -394,7 +397,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name) err: IWL_ERROR("Can't open the debugfs directory\n"); iwl_dbgfs_unregister(priv); - return -ENOENT; + return ret; } EXPORT_SYMBOL(iwl_dbgfs_register); @@ -404,7 +407,7 @@ EXPORT_SYMBOL(iwl_dbgfs_register); */ void iwl_dbgfs_unregister(struct iwl_priv *priv) { - if (!(priv->dbgfs)) + if (!priv->dbgfs) return; DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_eeprom); diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index 4a08a1b50979..bce53830b301 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -273,8 +273,7 @@ EXPORT_SYMBOL(iwl_eeprom_init); void iwl_eeprom_free(struct iwl_priv *priv) { - if(priv->eeprom) - kfree(priv->eeprom); + kfree(priv->eeprom); priv->eeprom = NULL; } EXPORT_SYMBOL(iwl_eeprom_free); diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 10af82170f6b..60a6e0106036 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -823,7 +823,7 @@ int iwl_send_lq_cmd(struct iwl_priv *priv, if (lq->sta_id == 0xFF) lq->sta_id = IWL_AP_ID; - iwl_dump_lq_cmd(priv,lq); + iwl_dump_lq_cmd(priv, lq); if (iwl_is_associated(priv) && priv->assoc_station_added) return iwl_send_cmd(priv, &cmd); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 7c82ecfa30a4..eb41b02b506d 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -275,10 +275,8 @@ static int iwl3945_tx_queue_alloc(struct iwl3945_priv *priv, return 0; error: - if (txq->txb) { - kfree(txq->txb); - txq->txb = NULL; - } + kfree(txq->txb); + txq->txb = NULL; return -ENOMEM; } @@ -365,10 +363,8 @@ void iwl3945_tx_queue_free(struct iwl3945_priv *priv, struct iwl3945_tx_queue *t txq->q.n_bd, txq->bd, txq->q.dma_addr); /* De-alloc array of per-TFD driver data */ - if (txq->txb) { - kfree(txq->txb); - txq->txb = NULL; - } + kfree(txq->txb); + txq->txb = NULL; /* 0-fill queue descriptor structure */ memset(txq, 0, sizeof(*txq)); @@ -2703,9 +2699,8 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb) if (!ieee80211_has_morefrags(hdr->frame_control)) { txq->need_update = 1; - if (qc) { + if (qc) priv->stations[sta_id].tid[tid].seq_number = seq_number; - } } else { wait_write_ptr = 1; txq->need_update = 0; @@ -3813,7 +3808,7 @@ int iwl3945_calc_db_from_ratio(int sig_ratio) /* 100:1 or higher, divide by 10 and use table, * add 20 dB to make up for divide by 10 */ if (sig_ratio >= 100) - return (20 + (int)ratio2dB[sig_ratio/10]); + return 20 + (int)ratio2dB[sig_ratio/10]; /* We shouldn't see this */ if (sig_ratio < 1) @@ -5088,7 +5083,7 @@ static void iwl3945_dealloc_ucode_pci(struct iwl3945_priv *priv) * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host, * looking at all data. */ -static int iwl3945_verify_inst_full(struct iwl3945_priv *priv, __le32 * image, u32 len) +static int iwl3945_verify_inst_full(struct iwl3945_priv *priv, __le32 *image, u32 len) { u32 val; u32 save_len = len; @@ -5237,7 +5232,7 @@ static int iwl3945_verify_bsm(struct iwl3945_priv *priv) val = iwl3945_read_prph(priv, BSM_WR_DWCOUNT_REG); for (reg = BSM_SRAM_LOWER_BOUND; reg < BSM_SRAM_LOWER_BOUND + len; - reg += sizeof(u32), image ++) { + reg += sizeof(u32), image++) { val = iwl3945_read_prph(priv, reg); if (val != le32_to_cpu(*image)) { IWL_ERROR("BSM uCode verification failed at " @@ -6336,7 +6331,7 @@ static void iwl3945_bg_post_associate(struct work_struct *data) DECLARE_MAC_BUF(mac); if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__); + IWL_ERROR("%s Should not be called in AP mode\n", __func__); return; } @@ -6417,7 +6412,7 @@ static void iwl3945_bg_post_associate(struct work_struct *data) default: IWL_ERROR("%s Should not be called in %d mode\n", - __FUNCTION__, priv->iw_mode); + __func__, priv->iw_mode); break; } @@ -7456,7 +7451,7 @@ static ssize_t show_measurement(struct device *d, struct iwl3945_priv *priv = dev_get_drvdata(d); struct iwl3945_spectrum_notification measure_report; u32 size = sizeof(measure_report), len = 0, ofs = 0; - u8 *data = (u8 *) & measure_report; + u8 *data = (u8 *)&measure_report; unsigned long flags; spin_lock_irqsave(&priv->lock, flags); @@ -7627,7 +7622,7 @@ static ssize_t show_power_level(struct device *d, else p += sprintf(p, " \n"); - return (p - buf + 1); + return p - buf + 1; } @@ -7649,7 +7644,7 @@ static ssize_t show_statistics(struct device *d, struct iwl3945_priv *priv = dev_get_drvdata(d); u32 size = sizeof(struct iwl3945_notif_statistics); u32 len = 0, ofs = 0; - u8 *data = (u8 *) & priv->statistics; + u8 *data = (u8 *)&priv->statistics; int rc = 0; if (!iwl3945_is_alive(priv)) @@ -8003,16 +7998,16 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e /* nic init */ iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); - - iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - err = iwl3945_poll_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); - if (err < 0) { - IWL_DEBUG_INFO("Failed to init the card\n"); + CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); + + iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + err = iwl3945_poll_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); + if (err < 0) { + IWL_DEBUG_INFO("Failed to init the card\n"); goto out_remove_sysfs; - } + } /* Read the EEPROM */ err = iwl3945_eeprom_init(priv); if (err) { @@ -8114,9 +8109,8 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) iwl3945_unset_hw_setting(priv); iwl3945_clear_stations_table(priv); - if (priv->mac80211_registered) { + if (priv->mac80211_registered) ieee80211_unregister_hw(priv->hw); - } /*netif_stop_queue(dev); */ flush_workqueue(priv->workqueue); -- cgit v1.2.3 From 4fc22b21b3fcb3580c32b70605ef114178f8e611 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 21 Jul 2008 18:54:42 +0300 Subject: iwlwifi: rename 4965 to AGN This patch renames driver name from 4965 to AGN The driver supports both 4965AGN and 5000AGN family The driver's original module name iwl4965.ko remains as an alias Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/Kconfig | 98 ++++++++++++++++++---------------- drivers/net/wireless/iwlwifi/Makefile | 11 ++-- drivers/net/wireless/iwlwifi/iwl-agn.c | 15 +++--- drivers/net/wireless/iwlwifi/iwl-dev.h | 7 +-- 4 files changed, 68 insertions(+), 63 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index 82b66a3d3a5d..b0ac0ce3fb9f 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -14,18 +14,49 @@ config IWLWIFI_LEDS default n config IWLWIFI_RFKILL - boolean "IWLWIFI RF kill support" + boolean "Iwlwifi RF kill support" depends on IWLCORE -config IWL4965 - tristate "Intel Wireless WiFi 4965AGN" +config IWLWIFI_DEBUG + bool "Enable full debugging output in iwlagn driver" + depends on IWLCORE + ---help--- + This option will enable debug tracing output for the iwlwifi drivers + + This will result in the kernel module being ~100k larger. You can + control which debug output is sent to the kernel log by setting the + value in + + /sys/class/net/wlan0/device/debug_level + + This entry will only exist if this option is enabled. + + To set a value, simply echo an 8-byte hex value to the same file: + + % echo 0x43fff > /sys/class/net/wlan0/device/debug_level + + You can find the list of debug mask values in: + drivers/net/wireless/iwlwifi/iwl-debug.h + + If this is your first time using this driver, you should say Y here + as the debug information can assist others in helping you resolve + any problems you may encounter. + +config IWLWIFI_DEBUGFS + bool "Iwlwifi debugfs support" + depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS + ---help--- + Enable creation of debugfs files for the iwlwifi drivers. + +config IWLAGN + tristate "Intel Wireless WiFi Next Gen AGN" depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL select FW_LOADER select IWLCORE ---help--- Select to build the driver supporting the: - Intel Wireless WiFi Link 4965AGN + Intel Wireless WiFi Link Next-Gen AGN This driver uses the kernel's mac80211 subsystem. @@ -42,60 +73,33 @@ config IWL4965 If you want to compile the driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read . The - module will be called iwl4965.ko. - -config IWL4965_LEDS - bool "Enable LEDS features in iwl4965 driver" - depends on IWL4965 - select IWLWIFI_LEDS - ---help--- - This option enables LEDS for the iwlwifi drivers + module will be called iwlagn.ko. - -config IWL4965_SPECTRUM_MEASUREMENT - bool "Enable Spectrum Measurement in iwl4965 driver" - depends on IWL4965 +config IWLAGN_SPECTRUM_MEASUREMENT + bool "Enable Spectrum Measurement in iwlagn driver" + depends on IWLAGN ---help--- - This option will enable spectrum measurement for the iwl4965 driver. + This option will enable spectrum measurement for the iwlagn driver. -config IWLWIFI_DEBUG - bool "Enable full debugging output in iwl4965 driver" - depends on IWL4965 +config IWLAGN_LEDS + bool "Enable LEDS features in iwlagn driver" + depends on IWLAGN + select IWLWIFI_LEDS ---help--- - This option will enable debug tracing output for the iwl4965 - driver. - - This will result in the kernel module being ~100k larger. You can - control which debug output is sent to the kernel log by setting the - value in - - /sys/class/net/wlan0/device/debug_level - - This entry will only exist if this option is enabled. - - To set a value, simply echo an 8-byte hex value to the same file: - - % echo 0x43fff > /sys/class/net/wlan0/device/debug_level + This option enables LEDS for the iwlagn drivers - You can find the list of debug mask values in: - drivers/net/wireless/iwlwifi/iwl-4965-debug.h - If this is your first time using this driver, you should say Y here - as the debug information can assist others in helping you resolve - any problems you may encounter. +config IWL4965 + bool "Intel Wireless WiFi 4965AGN" + depends on IWLAGN + ---help--- + This option enables support for Intel Wireless WiFi Link 4965AGN config IWL5000 bool "Intel Wireless WiFi 5000AGN" - depends on IWL4965 + depends on IWLAGN ---help--- This option enables support for Intel Wireless WiFi Link 5000AGN Family - Dependency on 4965 is temporary - -config IWLWIFI_DEBUGFS - bool "Iwlwifi debugfs support" - depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS - ---help--- - Enable creation of debugfs files for the iwlwifi drivers. config IWL3945 tristate "Intel PRO/Wireless 3945ABG/BG Network Connection" diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index 6bf3998736b5..47aa28f6a513 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -6,13 +6,14 @@ iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o iwlcore-$(CONFIG_IWLWIFI_RFKILL) += iwl-rfkill.o +obj-$(CONFIG_IWLAGN) += iwlagn.o +iwlagn-objs := iwl-agn.o iwl-agn-rs.o + +iwlagn-$(CONFIG_IWL4965) += iwl-4965.o +iwlagn-$(CONFIG_IWL5000) += iwl-5000.o + obj-$(CONFIG_IWL3945) += iwl3945.o iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl3945-$(CONFIG_IWL3945_LEDS) += iwl-3945-led.o -obj-$(CONFIG_IWL4965) += iwl4965.o -iwl4965-objs := iwl-agn.o iwl-4965.o iwl-agn-rs.o - -iwl4965-$(CONFIG_IWL5000) += iwl-5000.o - diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 4ff0636dbddc..6503b3ac8d66 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -73,7 +73,7 @@ #define VD #endif -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT #define VS "s" #else #define VS @@ -86,6 +86,7 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION); MODULE_VERSION(DRV_VERSION); MODULE_AUTHOR(DRV_COPYRIGHT); MODULE_LICENSE("GPL"); +MODULE_ALIAS("iwl4965"); /*************** STATION TABLE MANAGEMENT **** * mac80211 should be examined to determine if sta_info is duplicating @@ -883,7 +884,7 @@ static void iwl4965_set_rate(struct iwl_priv *priv) (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; } -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT #include "iwl-spectrum.h" @@ -1087,7 +1088,7 @@ static void iwl4965_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) static void iwl4965_rx_spectrum_measure_notif(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) { -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; struct iwl4965_spectrum_notification *report = &(pkt->u.spectrum_notif); @@ -3786,7 +3787,7 @@ static ssize_t store_filter_flags(struct device *d, static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags, store_filter_flags); -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT static ssize_t show_measurement(struct device *d, struct device_attribute *attr, char *buf) @@ -3857,7 +3858,7 @@ static ssize_t store_measurement(struct device *d, static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR, show_measurement, store_measurement); -#endif /* CONFIG_IWL4965_SPECTRUM_MEASUREMENT */ +#endif /* CONFIG_IWLAGN_SPECTRUM_MEASUREMENT */ static ssize_t store_retry_rate(struct device *d, struct device_attribute *attr, @@ -4105,7 +4106,7 @@ static struct attribute *iwl4965_sysfs_entries[] = { &dev_attr_channels.attr, &dev_attr_flags.attr, &dev_attr_filter_flags.attr, -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT &dev_attr_measurement.attr, #endif &dev_attr_power_level.attr, @@ -4457,8 +4458,10 @@ static int iwl4965_pci_resume(struct pci_dev *pdev) /* Hardware specific file defines the PCI IDs table for that hardware module */ static struct pci_device_id iwl_hw_card_ids[] = { +#ifdef CONFIG_IWL4965 {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)}, {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)}, +#endif /* CONFIG_IWL4965 */ #ifdef CONFIG_IWL5000 {IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bg_cfg)}, {IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bg_cfg)}, diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 7ac56b1350b7..848786ab7916 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -36,7 +36,7 @@ #include #include -#define DRV_NAME "iwl4965" +#define DRV_NAME "iwlagn" #include "iwl-rfkill.h" #include "iwl-eeprom.h" #include "iwl-4965-hw.h" @@ -808,14 +808,11 @@ struct iwl_chain_noise_data { #define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT - enum { MEASUREMENT_READY = (1 << 0), MEASUREMENT_ACTIVE = (1 << 1), }; -#endif #define IWL_MAX_NUM_QUEUES 20 /* FIXME: do dynamic allocation */ @@ -840,7 +837,7 @@ struct iwl_priv { struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT /* spectrum measurement report caching */ struct iwl4965_spectrum_notification measure_report; u8 measurement_status; -- cgit v1.2.3 From 5cbbb376d65ed181ed290cea505ba37a0425ee25 Mon Sep 17 00:00:00 2001 From: Sven Wegener Date: Fri, 1 Aug 2008 21:57:16 +0200 Subject: iwlwifi: Don't use buffer allocated on the stack for led names Having the buffer on the stack and even re-using it for all led devices is bad. Not being able to resolve the name member of the led device structure to a meaningful value leads to confusion during ad-hoc debugging and potential breakage in the future, if we ever decide to access the name member outside of the registration function. Move the buffer to our private per led device structures so that it is accessible after registration. A quick grep didn't yield any occurence of using the led device name parameter outside of the led device registration function, so currently we should already be safe for normal operation. Signed-off-by: Sven Wegener Cc: Richard Purdie Acked-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945-led.c | 33 +++++++++++++++-------------- drivers/net/wireless/iwlwifi/iwl-3945-led.h | 1 + drivers/net/wireless/iwlwifi/iwl-led.c | 29 ++++++++++++++----------- drivers/net/wireless/iwlwifi/iwl-led.h | 1 + 4 files changed, 36 insertions(+), 28 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c index 6be1fe13fa57..d3336966b6b5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c @@ -206,12 +206,12 @@ static void iwl3945_led_brightness_set(struct led_classdev *led_cdev, static int iwl3945_led_register_led(struct iwl3945_priv *priv, struct iwl3945_led *led, enum led_type type, u8 set_led, - const char *name, char *trigger) + char *trigger) { struct device *device = wiphy_dev(priv->hw->wiphy); int ret; - led->led_dev.name = name; + led->led_dev.name = led->name; led->led_dev.brightness_set = iwl3945_led_brightness_set; led->led_dev.default_trigger = trigger; @@ -308,7 +308,6 @@ void iwl3945_led_background(struct iwl3945_priv *priv) int iwl3945_led_register(struct iwl3945_priv *priv) { char *trigger; - char name[32]; int ret; priv->last_blink_rate = 0; @@ -318,7 +317,8 @@ int iwl3945_led_register(struct iwl3945_priv *priv) priv->allow_blinking = 0; trigger = ieee80211_get_radio_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:radio", + snprintf(priv->led[IWL_LED_TRG_RADIO].name, + sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s:radio", wiphy_name(priv->hw->wiphy)); priv->led[IWL_LED_TRG_RADIO].led_on = iwl3945_led_on; @@ -327,19 +327,20 @@ int iwl3945_led_register(struct iwl3945_priv *priv) ret = iwl3945_led_register_led(priv, &priv->led[IWL_LED_TRG_RADIO], - IWL_LED_TRG_RADIO, 1, - name, trigger); + IWL_LED_TRG_RADIO, 1, trigger); + if (ret) goto exit_fail; trigger = ieee80211_get_assoc_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:assoc", + snprintf(priv->led[IWL_LED_TRG_ASSOC].name, + sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s:assoc", wiphy_name(priv->hw->wiphy)); ret = iwl3945_led_register_led(priv, &priv->led[IWL_LED_TRG_ASSOC], - IWL_LED_TRG_ASSOC, 0, - name, trigger); + IWL_LED_TRG_ASSOC, 0, trigger); + /* for assoc always turn led on */ priv->led[IWL_LED_TRG_ASSOC].led_on = iwl3945_led_on; priv->led[IWL_LED_TRG_ASSOC].led_off = iwl3945_led_on; @@ -349,14 +350,13 @@ int iwl3945_led_register(struct iwl3945_priv *priv) goto exit_fail; trigger = ieee80211_get_rx_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:RX", + snprintf(priv->led[IWL_LED_TRG_RX].name, + sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s:RX", wiphy_name(priv->hw->wiphy)); - ret = iwl3945_led_register_led(priv, &priv->led[IWL_LED_TRG_RX], - IWL_LED_TRG_RX, 0, - name, trigger); + IWL_LED_TRG_RX, 0, trigger); priv->led[IWL_LED_TRG_RX].led_on = iwl3945_led_associated; priv->led[IWL_LED_TRG_RX].led_off = iwl3945_led_associated; @@ -366,13 +366,14 @@ int iwl3945_led_register(struct iwl3945_priv *priv) goto exit_fail; trigger = ieee80211_get_tx_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:TX", + snprintf(priv->led[IWL_LED_TRG_TX].name, + sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s:TX", wiphy_name(priv->hw->wiphy)); ret = iwl3945_led_register_led(priv, &priv->led[IWL_LED_TRG_TX], - IWL_LED_TRG_TX, 0, - name, trigger); + IWL_LED_TRG_TX, 0, trigger); + priv->led[IWL_LED_TRG_TX].led_on = iwl3945_led_associated; priv->led[IWL_LED_TRG_TX].led_off = iwl3945_led_associated; priv->led[IWL_LED_TRG_TX].led_pattern = iwl3945_led_pattern; diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.h b/drivers/net/wireless/iwlwifi/iwl-3945-led.h index 47b7e0bac802..2fbd126c1347 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-led.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.h @@ -50,6 +50,7 @@ enum led_type { struct iwl3945_led { struct iwl3945_priv *priv; struct led_classdev led_dev; + char name[32]; int (*led_on) (struct iwl3945_priv *priv, int led_id); int (*led_off) (struct iwl3945_priv *priv, int led_id); diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c index 0a01f091c516..cb11c4a4d691 100644 --- a/drivers/net/wireless/iwlwifi/iwl-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-led.c @@ -242,12 +242,12 @@ static void iwl_led_brightness_set(struct led_classdev *led_cdev, */ static int iwl_leds_register_led(struct iwl_priv *priv, struct iwl_led *led, enum led_type type, u8 set_led, - const char *name, char *trigger) + char *trigger) { struct device *device = wiphy_dev(priv->hw->wiphy); int ret; - led->led_dev.name = name; + led->led_dev.name = led->name; led->led_dev.brightness_set = iwl_led_brightness_set; led->led_dev.default_trigger = trigger; @@ -345,7 +345,6 @@ EXPORT_SYMBOL(iwl_leds_background); int iwl_leds_register(struct iwl_priv *priv) { char *trigger; - char name[32]; int ret; priv->last_blink_rate = 0; @@ -354,7 +353,8 @@ int iwl_leds_register(struct iwl_priv *priv) priv->allow_blinking = 0; trigger = ieee80211_get_radio_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:radio", + snprintf(priv->led[IWL_LED_TRG_RADIO].name, + sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s:radio", wiphy_name(priv->hw->wiphy)); priv->led[IWL_LED_TRG_RADIO].led_on = iwl4965_led_on_reg; @@ -362,16 +362,17 @@ int iwl_leds_register(struct iwl_priv *priv) priv->led[IWL_LED_TRG_RADIO].led_pattern = NULL; ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RADIO], - IWL_LED_TRG_RADIO, 1, name, trigger); + IWL_LED_TRG_RADIO, 1, trigger); if (ret) goto exit_fail; trigger = ieee80211_get_assoc_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:assoc", + snprintf(priv->led[IWL_LED_TRG_ASSOC].name, + sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s:assoc", wiphy_name(priv->hw->wiphy)); ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_ASSOC], - IWL_LED_TRG_ASSOC, 0, name, trigger); + IWL_LED_TRG_ASSOC, 0, trigger); /* for assoc always turn led on */ priv->led[IWL_LED_TRG_ASSOC].led_on = iwl_led_associate; @@ -382,11 +383,12 @@ int iwl_leds_register(struct iwl_priv *priv) goto exit_fail; trigger = ieee80211_get_rx_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:RX", wiphy_name(priv->hw->wiphy)); - + snprintf(priv->led[IWL_LED_TRG_RX].name, + sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s:RX", + wiphy_name(priv->hw->wiphy)); ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RX], - IWL_LED_TRG_RX, 0, name, trigger); + IWL_LED_TRG_RX, 0, trigger); priv->led[IWL_LED_TRG_RX].led_on = iwl_led_associated; priv->led[IWL_LED_TRG_RX].led_off = iwl_led_associated; @@ -396,9 +398,12 @@ int iwl_leds_register(struct iwl_priv *priv) goto exit_fail; trigger = ieee80211_get_tx_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:TX", wiphy_name(priv->hw->wiphy)); + snprintf(priv->led[IWL_LED_TRG_TX].name, + sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s:TX", + wiphy_name(priv->hw->wiphy)); + ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_TX], - IWL_LED_TRG_TX, 0, name, trigger); + IWL_LED_TRG_TX, 0, trigger); priv->led[IWL_LED_TRG_TX].led_on = iwl_led_associated; priv->led[IWL_LED_TRG_TX].led_off = iwl_led_associated; diff --git a/drivers/net/wireless/iwlwifi/iwl-led.h b/drivers/net/wireless/iwlwifi/iwl-led.h index 1980ae5a7e82..588c9ad20e83 100644 --- a/drivers/net/wireless/iwlwifi/iwl-led.h +++ b/drivers/net/wireless/iwlwifi/iwl-led.h @@ -52,6 +52,7 @@ enum led_type { struct iwl_led { struct iwl_priv *priv; struct led_classdev led_dev; + char name[32]; int (*led_on) (struct iwl_priv *priv, int led_id); int (*led_off) (struct iwl_priv *priv, int led_id); -- cgit v1.2.3 From d06193f311102b2c990ec5f66b470ea49ecc73a4 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 3 Aug 2008 23:36:01 +0200 Subject: rt2x00: Disable link tuning in rt2500usb In the legacy rt2570 driver the link tuner was never really called. And now the reason has finally become apparent: It breaks TX capabilities As soon as the device has been associated all following TX frames will be queued in the hardware and never transmitted to the air. Disabling sections of the link tuner did not have the expected result, but completely disabling the link tuner did have the right result (Both of my rt2570 devices came back to life). This should fix Fedora bug: 411481 v2: Fix typos Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2500usb.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index c6f6eb6e17a1..cd5af656932d 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -633,6 +633,16 @@ static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev) rt2x00dev->link.vgc_level = value; } +/* + * NOTE: This function is directly ported from legacy driver, but + * despite it being declared it was never called. Although link tuning + * sounds like a good idea, and usually works well for the other drivers, + * it does _not_ work with rt2500usb. Enabling this function will result + * in TX capabilities only until association kicks in. Immediately + * after the successful association all TX frames will be kept in the + * hardware queue and never transmitted. + */ +#if 0 static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev) { int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); @@ -752,6 +762,9 @@ dynamic_cca_tune: rt2x00dev->link.vgc_level = r17; } } +#else +#define rt2500usb_link_tuner NULL +#endif /* * Initialization functions. @@ -1737,6 +1750,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags); + __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags); /* * Set the rssi offset. -- cgit v1.2.3 From 6041e2a08c50e3fcaf1e56422bfafda62c597cea Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 3 Aug 2008 17:58:36 -0500 Subject: p54: Fix potential concurrent access to private data Experience with the rtl8187 driver has shown that mac80211 can make calls to the config callback routine in rapid succession. This patch creates a mutex that protects the private data in several of the routines called by mac80211. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54.h | 1 + drivers/net/wireless/p54/p54common.c | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h index c6f27b9022f9..cac9a515b82d 100644 --- a/drivers/net/wireless/p54/p54.h +++ b/drivers/net/wireless/p54/p54.h @@ -52,6 +52,7 @@ struct p54_common { int (*open)(struct ieee80211_hw *dev); void (*stop)(struct ieee80211_hw *dev); int mode; + struct mutex conf_mutex; u8 mac_addr[ETH_ALEN]; u8 bssid[ETH_ALEN]; struct pda_iq_autocal_entry *iq_autocal; diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index ffaf7a6b6810..4da89ea9b561 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -886,9 +886,12 @@ static void p54_remove_interface(struct ieee80211_hw *dev, static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) { int ret; + struct p54_common *priv = dev->priv; + mutex_lock(&priv->conf_mutex); ret = p54_set_freq(dev, cpu_to_le16(conf->channel->center_freq)); p54_set_vdcf(dev); + mutex_unlock(&priv->conf_mutex); return ret; } @@ -898,10 +901,12 @@ static int p54_config_interface(struct ieee80211_hw *dev, { struct p54_common *priv = dev->priv; + mutex_lock(&priv->conf_mutex); p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 0, 1, 0, 0xF642); p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 2, 0, 0, 0); p54_set_leds(dev, 1, !is_multicast_ether_addr(conf->bssid), 0); memcpy(priv->bssid, conf->bssid, ETH_ALEN); + mutex_unlock(&priv->conf_mutex); return 0; } @@ -1009,6 +1014,7 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len) } p54_init_vdcf(dev); + mutex_init(&priv->conf_mutex); return dev; } -- cgit v1.2.3 From 4c43e0d0ecd5196ed5c67f64ed2f1860770eed34 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 4 Aug 2008 16:00:39 +0800 Subject: iwlwifi: HW bug fixes This patch adds few HW bug fixes. Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 15 +++++++++++++++ drivers/net/wireless/iwlwifi/iwl-csr.h | 10 +++++++++- drivers/net/wireless/iwlwifi/iwl-prph.h | 12 +++++++----- net/mac80211/mlme.c | 2 +- 4 files changed, 32 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index f7bbd12193f9..1d793c093f1a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -93,6 +93,13 @@ static int iwl5000_apm_init(struct iwl_priv *priv) iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); + /* Set FH wait treshold to maximum (HW error during stress W/A) */ + iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL); + + /* enable HAP INTA to move device L1a -> L0s */ + iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); + iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL); /* set "initialization complete" bit to move adapter @@ -230,6 +237,14 @@ static void iwl5000_nic_config(struct iwl_priv *priv) CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); + /* W/A : NIC is stuck in a reset state after Early PCIe power off + * (PCIe power is lost before PERST# is asserted), + * causing ME FW to lose ownership and not being able to obtain it back. + */ + iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS, + ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS); + spin_unlock_irqrestore(&priv->lock, flags); } diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index 545ed692d889..52629fbd835a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -104,6 +104,7 @@ * 3-2: 0 = A, 1 = B, 2 = C, 3 = D step */ #define CSR_HW_REV_WA_REG (CSR_BASE+0x22C) +#define CSR_DBG_HPET_MEM_REG (CSR_BASE+0x240) /* Bits for CSR_HW_IF_CONFIG_REG */ #define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010) @@ -118,7 +119,12 @@ #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A (0x00000000) #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B (0x00001000) -#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000) +#define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000) +#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000) +#define CSR_HW_IF_CONFIG_REG_BIT_PCI_OWN_SEM (0x00400000) +#define CSR_HW_IF_CONFIG_REG_BIT_ME_OWN (0x02000000) +#define CSR_HW_IF_CONFIG_REG_BIT_WAKE_ME (0x08000000) + /* interrupt flags in INTA, set by uCode or hardware (e.g. dma), * acknowledged (reset) by host writing "1" to flagged bits. */ @@ -236,6 +242,8 @@ #define CSR39_ANA_PLL_CFG_VAL (0x01000000) #define CSR50_ANA_PLL_CFG_VAL (0x00880300) +/* HPET MEM debug */ +#define CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000) /*=== HBUS (Host-side Bus) ===*/ #define HBUS_BASE (0x400) /* diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index 70d9c7568b98..ee5afd48d3af 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -84,14 +84,16 @@ #define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200) #define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800) -#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000) -#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) +#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000) +#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000) +#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000) +#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000) +#define APMG_PS_CTRL_VAL_PWR_SRC_MAX (0x01000000) /* 3945 only */ +#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000) -#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000) -#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000) -#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x01000000) +#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) /** * BSM (Bootstrap State Machine) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 5358420d8796..e1d11c9b6729 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3920,7 +3920,7 @@ done: if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { struct ieee80211_if_sta *ifsta = &sdata->u.sta; if (!(ifsta->flags & IEEE80211_STA_BSSID_SET) || - (!ifsta->state == IEEE80211_IBSS_JOINED && + (!(ifsta->state == IEEE80211_IBSS_JOINED) && !ieee80211_sta_active_ibss(dev))) ieee80211_sta_find_ibss(dev, ifsta); } -- cgit v1.2.3 From da99c4b6c25964b90c79f19beccda208df1a865a Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Mon, 4 Aug 2008 16:00:40 +0800 Subject: iwlwifi: memory allocation optimization This patch optimizes memory allocation. The cmd member of iwl_tx_queue was allocated previously as a continuous block of memory. This patch allocates separate memory chunks for each command and maps/unmaps these chunks in the run time. Signed-off-by: Gregory Greenman Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 6 +-- drivers/net/wireless/iwlwifi/iwl-dev.h | 3 +- drivers/net/wireless/iwlwifi/iwl-hcmd.c | 2 +- drivers/net/wireless/iwlwifi/iwl-tx.c | 76 +++++++++++++++++++++++---------- 4 files changed, 59 insertions(+), 28 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 1d793c093f1a..56dbc8144a34 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -939,8 +939,8 @@ static void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv, len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE; if (txq_id != IWL_CMD_QUEUE_NUM) { - sta = txq->cmd[txq->q.write_ptr].cmd.tx.sta_id; - sec_ctl = txq->cmd[txq->q.write_ptr].cmd.tx.sec_ctl; + sta = txq->cmd[txq->q.write_ptr]->cmd.tx.sta_id; + sec_ctl = txq->cmd[txq->q.write_ptr]->cmd.tx.sec_ctl; switch (sec_ctl & TX_CMD_SEC_MSK) { case TX_CMD_SEC_CCM: @@ -979,7 +979,7 @@ static void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv, u8 sta = 0; if (txq_id != IWL_CMD_QUEUE_NUM) - sta = txq->cmd[txq->q.read_ptr].cmd.tx.sta_id; + sta = txq->cmd[txq->q.read_ptr]->cmd.tx.sta_id; shared_data->queues_byte_cnt_tbls[txq_id].tfd_offset[txq->q.read_ptr]. val = cpu_to_le16(1 | (sta << 12)); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 848786ab7916..c19db438306c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -135,8 +135,7 @@ struct iwl_tx_info { struct iwl_tx_queue { struct iwl_queue q; struct iwl_tfd_frame *bd; - struct iwl_cmd *cmd; - dma_addr_t dma_addr_cmd; + struct iwl_cmd *cmd[TFD_TX_CMD_SLOTS]; struct iwl_tx_info *txb; int need_update; int sched_retry; diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index 8fa991b7202a..6512834bb916 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -228,7 +228,7 @@ cancel: * TX cmd queue. Otherwise in case the cmd comes * in later, it will possibly set an invalid * address (cmd->meta.source). */ - qcmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx]; + qcmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx]; qcmd->meta.flags &= ~CMD_WANT_SKB; } fail: diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 39f19ebee973..aa98c76d8195 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -208,11 +208,12 @@ EXPORT_SYMBOL(iwl_txq_update_write_ptr); * Free all buffers. * 0-fill, but do not free "txq" descriptor structure. */ -static void iwl_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq) +static void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id) { + struct iwl_tx_queue *txq = &priv->txq[txq_id]; struct iwl_queue *q = &txq->q; struct pci_dev *dev = priv->pci_dev; - int len; + int i, slots_num, len; if (q->n_bd == 0) return; @@ -227,7 +228,12 @@ static void iwl_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq) len += IWL_MAX_SCAN_SIZE; /* De-alloc array of command/tx buffers */ - pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd); + slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ? + TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS; + for (i = 0; i < slots_num; i++) + kfree(txq->cmd[i]); + if (txq_id == IWL_CMD_QUEUE_NUM) + kfree(txq->cmd[slots_num]); /* De-alloc circular buffer of TFDs */ if (txq->q.n_bd) @@ -400,8 +406,7 @@ static int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq, int slots_num, u32 txq_id) { - struct pci_dev *dev = priv->pci_dev; - int len; + int i, len; int rc = 0; /* @@ -412,17 +417,25 @@ static int iwl_tx_queue_init(struct iwl_priv *priv, * For normal Tx queues (all other queues), no super-size command * space is needed. */ - len = sizeof(struct iwl_cmd) * slots_num; - if (txq_id == IWL_CMD_QUEUE_NUM) - len += IWL_MAX_SCAN_SIZE; - txq->cmd = pci_alloc_consistent(dev, len, &txq->dma_addr_cmd); - if (!txq->cmd) - return -ENOMEM; + len = sizeof(struct iwl_cmd); + for (i = 0; i <= slots_num; i++) { + if (i == slots_num) { + if (txq_id == IWL_CMD_QUEUE_NUM) + len += IWL_MAX_SCAN_SIZE; + else + continue; + } + + txq->cmd[i] = kmalloc(len, GFP_KERNEL | GFP_DMA); + if (!txq->cmd[i]) + return -ENOMEM; + } /* Alloc driver data array and TFD circular buffer */ rc = iwl_tx_queue_alloc(priv, txq, txq_id); if (rc) { - pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd); + for (i = 0; i < slots_num; i++) + kfree(txq->cmd[i]); return -ENOMEM; } @@ -451,7 +464,7 @@ void iwl_hw_txq_ctx_free(struct iwl_priv *priv) /* Tx queues */ for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) - iwl_tx_queue_free(priv, &priv->txq[txq_id]); + iwl_tx_queue_free(priv, txq_id); /* Keep-warm buffer */ iwl_kw_free(priv); @@ -859,7 +872,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) txq->txb[q->write_ptr].skb[0] = skb; /* Set up first empty entry in queue's array of Tx/cmd buffers */ - out_cmd = &txq->cmd[idx]; + out_cmd = txq->cmd[idx]; tx_cmd = &out_cmd->cmd.tx; memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); memset(tx_cmd, 0, sizeof(struct iwl_tx_cmd)); @@ -899,8 +912,9 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) /* Physical address of this Tx command's header (not MAC header!), * within command buffer array. */ - txcmd_phys = txq->dma_addr_cmd + sizeof(struct iwl_cmd) * idx + - offsetof(struct iwl_cmd, hdr); + txcmd_phys = pci_map_single(priv->pci_dev, out_cmd, + sizeof(struct iwl_cmd), PCI_DMA_TODEVICE); + txcmd_phys += offsetof(struct iwl_cmd, hdr); /* Add buffer containing Tx command and MAC(!) header to TFD's * first entry */ @@ -1004,7 +1018,7 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) u32 idx; u16 fix_size; dma_addr_t phys_addr; - int ret; + int len, ret; unsigned long flags; cmd->len = priv->cfg->ops->utils->get_hcmd_size(cmd->id, cmd->len); @@ -1034,7 +1048,7 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) control_flags = (u32 *) tfd; idx = get_cmd_index(q, q->write_ptr, cmd->meta.flags & CMD_SIZE_HUGE); - out_cmd = &txq->cmd[idx]; + out_cmd = txq->cmd[idx]; out_cmd->hdr.cmd = cmd->id; memcpy(&out_cmd->meta, &cmd->meta, sizeof(cmd->meta)); @@ -1048,9 +1062,11 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) INDEX_TO_SEQ(q->write_ptr)); if (out_cmd->meta.flags & CMD_SIZE_HUGE) out_cmd->hdr.sequence |= cpu_to_le16(SEQ_HUGE_FRAME); - - phys_addr = txq->dma_addr_cmd + sizeof(txq->cmd[0]) * idx + - offsetof(struct iwl_cmd, hdr); + len = (idx == TFD_CMD_SLOTS) ? + IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd); + phys_addr = pci_map_single(priv->pci_dev, out_cmd, len, + PCI_DMA_TODEVICE); + phys_addr += offsetof(struct iwl_cmd, hdr); iwl_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, fix_size); IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, " @@ -1115,6 +1131,9 @@ static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) { struct iwl_tx_queue *txq = &priv->txq[txq_id]; struct iwl_queue *q = &txq->q; + struct iwl_tfd_frame *bd = &txq->bd[index]; + dma_addr_t dma_addr; + int is_odd, buf_len; int nfreed = 0; if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) { @@ -1132,6 +1151,19 @@ static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) q->write_ptr, q->read_ptr); queue_work(priv->workqueue, &priv->restart); } + is_odd = (index/2) & 0x1; + if (is_odd) { + dma_addr = IWL_GET_BITS(bd->pa[index], tb2_addr_lo16) | + (IWL_GET_BITS(bd->pa[index], + tb2_addr_hi20) << 16); + buf_len = IWL_GET_BITS(bd->pa[index], tb2_len); + } else { + dma_addr = le32_to_cpu(bd->pa[index].tb1_addr); + buf_len = IWL_GET_BITS(bd->pa[index], tb1_len); + } + + pci_unmap_single(priv->pci_dev, dma_addr, buf_len, + PCI_DMA_TODEVICE); nfreed++; } } @@ -1163,7 +1195,7 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) BUG_ON(txq_id != IWL_CMD_QUEUE_NUM); cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge); - cmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index]; + cmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index]; /* Input error checking is done when commands are added to queue. */ if (cmd->meta.flags & CMD_WANT_SKB) { -- cgit v1.2.3 From caab8f1a5d0da583b6ffe41afea2774c676444ca Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 4 Aug 2008 16:00:42 +0800 Subject: iwlwifi: implement iwl5000_calc_rssi This patch implements rssi calculation for 5000 HW. Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 35 +++++++++++++++++ drivers/net/wireless/iwlwifi/iwl-5000.c | 39 +++++++++++++++++++ drivers/net/wireless/iwlwifi/iwl-commands.h | 35 +++++++++++++---- drivers/net/wireless/iwlwifi/iwl-core.h | 2 + drivers/net/wireless/iwlwifi/iwl-rx.c | 59 ++++++++--------------------- 5 files changed, 119 insertions(+), 51 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 718f9d9e4947..22bb26985c2e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2258,6 +2258,40 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, IWL_ERROR("TODO: Implement Tx ABORT REQUIRED!!!\n"); } +static int iwl4965_calc_rssi(struct iwl_priv *priv, + struct iwl_rx_phy_res *rx_resp) +{ + /* data from PHY/DSP regarding signal strength, etc., + * contents are always there, not configurable by host. */ + struct iwl4965_rx_non_cfg_phy *ncphy = + (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf; + u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK) + >> IWL49_AGC_DB_POS; + + u32 valid_antennae = + (le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK) + >> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET; + u8 max_rssi = 0; + u32 i; + + /* Find max rssi among 3 possible receivers. + * These values are measured by the digital signal processor (DSP). + * They should stay fairly constant even as the signal strength varies, + * if the radio's automatic gain control (AGC) is working right. + * AGC value (see below) will provide the "interesting" info. */ + for (i = 0; i < 3; i++) + if (valid_antennae & (1 << i)) + max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); + + IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n", + ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], + max_rssi, agc); + + /* dBm = max_rssi dB - agc dB - constant. + * Higher AGC (higher radio gain) means lower signal. */ + return max_rssi - agc - IWL_RSSI_OFFSET; +} + /* Set up 4965-specific Rx frame reply handlers */ static void iwl4965_rx_handler_setup(struct iwl_priv *priv) @@ -2289,6 +2323,7 @@ static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = { .chain_noise_reset = iwl4965_chain_noise_reset, .gain_computation = iwl4965_gain_computation, .rts_tx_cmd_flag = iwl4965_rts_tx_cmd_flag, + .calc_rssi = iwl4965_calc_rssi, }; static struct iwl_lib_ops iwl4965_lib = { diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 56dbc8144a34..c5b104fd149c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1459,6 +1459,44 @@ static void iwl5000_temperature(struct iwl_priv *priv) priv->temperature = le32_to_cpu(priv->statistics.general.temperature); } +/* Calc max signal level (dBm) among 3 possible receivers */ +static int iwl5000_calc_rssi(struct iwl_priv *priv, + struct iwl_rx_phy_res *rx_resp) +{ + /* data from PHY/DSP regarding signal strength, etc., + * contents are always there, not configurable by host + */ + struct iwl5000_non_cfg_phy *ncphy = + (struct iwl5000_non_cfg_phy *)rx_resp->non_cfg_phy_buf; + u32 val, rssi_a, rssi_b, rssi_c, max_rssi; + u8 agc; + + val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_AGC_IDX]); + agc = (val & IWL50_OFDM_AGC_MSK) >> IWL50_OFDM_AGC_BIT_POS; + + /* Find max rssi among 3 possible receivers. + * These values are measured by the digital signal processor (DSP). + * They should stay fairly constant even as the signal strength varies, + * if the radio's automatic gain control (AGC) is working right. + * AGC value (see below) will provide the "interesting" info. + */ + val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_RSSI_AB_IDX]); + rssi_a = (val & IWL50_OFDM_RSSI_A_MSK) >> IWL50_OFDM_RSSI_A_BIT_POS; + rssi_b = (val & IWL50_OFDM_RSSI_B_MSK) >> IWL50_OFDM_RSSI_B_BIT_POS; + val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_RSSI_C_IDX]); + rssi_c = (val & IWL50_OFDM_RSSI_C_MSK) >> IWL50_OFDM_RSSI_C_BIT_POS; + + max_rssi = max_t(u32, rssi_a, rssi_b); + max_rssi = max_t(u32, max_rssi, rssi_c); + + IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n", + rssi_a, rssi_b, rssi_c, max_rssi, agc); + + /* dBm = max_rssi dB - agc dB - constant. + * Higher AGC (higher radio gain) means lower signal. */ + return max_rssi - agc - IWL_RSSI_OFFSET; +} + static struct iwl_hcmd_ops iwl5000_hcmd = { .rxon_assoc = iwl5000_send_rxon_assoc, }; @@ -1469,6 +1507,7 @@ static struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = { .gain_computation = iwl5000_gain_computation, .chain_noise_reset = iwl5000_chain_noise_reset, .rts_tx_cmd_flag = iwl5000_rts_tx_cmd_flag, + .calc_rssi = iwl5000_calc_rssi, }; static struct iwl_lib_ops iwl5000_lib = { diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 5e57f3ae2ea6..28b5b09996ed 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -1075,10 +1075,12 @@ struct iwl4965_rx_frame { } __attribute__ ((packed)); /* Fixed (non-configurable) rx data from phy */ -#define RX_PHY_FLAGS_ANTENNAE_OFFSET (4) -#define RX_PHY_FLAGS_ANTENNAE_MASK (0x70) -#define IWL_AGC_DB_MASK (0x3f80) /* MASK(7,13) */ -#define IWL_AGC_DB_POS (7) + +#define IWL49_RX_RES_PHY_CNT 14 +#define IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET (4) +#define IWL49_RX_PHY_FLAGS_ANTENNAE_MASK (0x70) +#define IWL49_AGC_DB_MASK (0x3f80) /* MASK(7,13) */ +#define IWL49_AGC_DB_POS (7) struct iwl4965_rx_non_cfg_phy { __le16 ant_selection; /* ant A bit 4, ant B bit 5, ant C bit 6 */ __le16 agc_info; /* agc code 0:6, agc dB 7:13, reserved 14:15 */ @@ -1086,12 +1088,30 @@ struct iwl4965_rx_non_cfg_phy { u8 pad[0]; } __attribute__ ((packed)); + +#define IWL50_RX_RES_PHY_CNT 8 +#define IWL50_RX_RES_AGC_IDX 1 +#define IWL50_RX_RES_RSSI_AB_IDX 2 +#define IWL50_RX_RES_RSSI_C_IDX 3 +#define IWL50_OFDM_AGC_MSK 0xfe00 +#define IWL50_OFDM_AGC_BIT_POS 9 +#define IWL50_OFDM_RSSI_A_MSK 0x00ff +#define IWL50_OFDM_RSSI_A_BIT_POS 0 +#define IWL50_OFDM_RSSI_B_MSK 0xff0000 +#define IWL50_OFDM_RSSI_B_BIT_POS 16 +#define IWL50_OFDM_RSSI_C_MSK 0x00ff +#define IWL50_OFDM_RSSI_C_BIT_POS 0 + +struct iwl5000_non_cfg_phy { + __le32 non_cfg_phy[IWL50_RX_RES_PHY_CNT]; /* upto 8 phy entries */ +} __attribute__ ((packed)); + + /* * REPLY_RX = 0xc3 (response only, not a command) * Used only for legacy (non 11n) frames. */ -#define RX_RES_PHY_CNT 14 -struct iwl4965_rx_phy_res { +struct iwl_rx_phy_res { u8 non_cfg_phy_cnt; /* non configurable DSP phy data byte count */ u8 cfg_phy_cnt; /* configurable DSP phy data byte count */ u8 stat_id; /* configurable DSP phy data set ID */ @@ -1100,8 +1120,7 @@ struct iwl4965_rx_phy_res { __le32 beacon_time_stamp; /* beacon at on-air rise */ __le16 phy_flags; /* general phy flags: band, modulation, ... */ __le16 channel; /* channel number */ - __le16 non_cfg_phy[RX_RES_PHY_CNT]; /* upto 14 phy entries */ - __le32 reserved2; + u8 non_cfg_phy_buf[32]; /* for various implementations of non_cfg_phy */ __le32 rate_n_flags; /* RATE_MCS_* */ __le16 byte_count; /* frame's byte-count */ __le16 reserved3; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index eaefa42f37c5..64f139e97444 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -95,6 +95,8 @@ struct iwl_hcmd_utils_ops { void (*chain_noise_reset)(struct iwl_priv *priv); void (*rts_tx_cmd_flag)(struct ieee80211_tx_info *info, __le32 *tx_flags); + int (*calc_rssi)(struct iwl_priv *priv, + struct iwl_rx_phy_res *rx_resp); }; struct iwl_lib_ops { diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index e2d9afba38a5..f3f6ea49fdd2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -791,7 +791,7 @@ static inline void iwl_dbg_report_frame(struct iwl_priv *priv, static void iwl_add_radiotap(struct iwl_priv *priv, struct sk_buff *skb, - struct iwl4965_rx_phy_res *rx_start, + struct iwl_rx_phy_res *rx_start, struct ieee80211_rx_status *stats, u32 ampdu_status) { @@ -1010,8 +1010,8 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, struct ieee80211_rx_status *stats) { struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - struct iwl4965_rx_phy_res *rx_start = (include_phy) ? - (struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) : NULL; + struct iwl_rx_phy_res *rx_start = (include_phy) ? + (struct iwl_rx_phy_res *)&(pkt->u.raw[0]) : NULL; struct ieee80211_hdr *hdr; u16 len; __le32 *rx_end; @@ -1020,7 +1020,7 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, u32 ampdu_status_legacy; if (!include_phy && priv->last_phy_res[0]) - rx_start = (struct iwl4965_rx_phy_res *)&priv->last_phy_res[1]; + rx_start = (struct iwl_rx_phy_res *)&priv->last_phy_res[1]; if (!rx_start) { IWL_ERROR("MPDU frame without a PHY data\n"); @@ -1032,8 +1032,8 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, len = le16_to_cpu(rx_start->byte_count); - rx_end = (__le32 *) ((u8 *) &pkt->u.raw[0] + - sizeof(struct iwl4965_rx_phy_res) + + rx_end = (__le32 *)((u8 *) &pkt->u.raw[0] + + sizeof(struct iwl_rx_phy_res) + rx_start->cfg_phy_cnt + len); } else { @@ -1084,40 +1084,13 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, } /* Calc max signal level (dBm) among 3 possible receivers */ -static int iwl_calc_rssi(struct iwl_priv *priv, - struct iwl4965_rx_phy_res *rx_resp) +static inline int iwl_calc_rssi(struct iwl_priv *priv, + struct iwl_rx_phy_res *rx_resp) { - /* data from PHY/DSP regarding signal strength, etc., - * contents are always there, not configurable by host. */ - struct iwl4965_rx_non_cfg_phy *ncphy = - (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy; - u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL_AGC_DB_MASK) - >> IWL_AGC_DB_POS; - - u32 valid_antennae = - (le16_to_cpu(rx_resp->phy_flags) & RX_PHY_FLAGS_ANTENNAE_MASK) - >> RX_PHY_FLAGS_ANTENNAE_OFFSET; - u8 max_rssi = 0; - u32 i; - - /* Find max rssi among 3 possible receivers. - * These values are measured by the digital signal processor (DSP). - * They should stay fairly constant even as the signal strength varies, - * if the radio's automatic gain control (AGC) is working right. - * AGC value (see below) will provide the "interesting" info. */ - for (i = 0; i < 3; i++) - if (valid_antennae & (1 << i)) - max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); - - IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n", - ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], - max_rssi, agc); - - /* dBm = max_rssi dB - agc dB - constant. - * Higher AGC (higher radio gain) means lower signal. */ - return max_rssi - agc - IWL_RSSI_OFFSET; + return priv->cfg->ops->utils->calc_rssi(priv, rx_resp); } + static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id) { unsigned long flags; @@ -1180,9 +1153,9 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, * this rx packet for legacy frames, * or phy data cached from REPLY_RX_PHY_CMD for HT frames. */ int include_phy = (pkt->hdr.cmd == REPLY_RX); - struct iwl4965_rx_phy_res *rx_start = (include_phy) ? - (struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) : - (struct iwl4965_rx_phy_res *)&priv->last_phy_res[1]; + struct iwl_rx_phy_res *rx_start = (include_phy) ? + (struct iwl_rx_phy_res *)&(pkt->u.raw[0]) : + (struct iwl_rx_phy_res *)&priv->last_phy_res[1]; __le32 *rx_end; unsigned int len = 0; u16 fc; @@ -1210,7 +1183,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, if (!include_phy) { if (priv->last_phy_res[0]) - rx_start = (struct iwl4965_rx_phy_res *) + rx_start = (struct iwl_rx_phy_res *) &priv->last_phy_res[1]; else rx_start = NULL; @@ -1227,7 +1200,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, len = le16_to_cpu(rx_start->byte_count); rx_end = (__le32 *)(pkt->u.raw + rx_start->cfg_phy_cnt + - sizeof(struct iwl4965_rx_phy_res) + len); + sizeof(struct iwl_rx_phy_res) + len); } else { struct iwl4965_rx_mpdu_res_start *amsdu = (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw; @@ -1316,6 +1289,6 @@ void iwl_rx_reply_rx_phy(struct iwl_priv *priv, struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; priv->last_phy_res[0] = 1; memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]), - sizeof(struct iwl4965_rx_phy_res)); + sizeof(struct iwl_rx_phy_res)); } EXPORT_SYMBOL(iwl_rx_reply_rx_phy); -- cgit v1.2.3 From c1842d6150c4efe1d01e7a8cf86c63aec6223486 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 4 Aug 2008 16:00:43 +0800 Subject: iwlwifi: fix unhandled interrupt when HW rfkill is on This patch fixes unhandled interrupt when HW rfkill is on during devices start up. The behavior changes, now open is successful even when rfkill is on. This is to align with the situation when rfkill is set on after opening. Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 6503b3ac8d66..b8407d5704a1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2232,17 +2232,16 @@ static int __iwl4965_up(struct iwl_priv *priv) } /* If platform's RF_KILL switch is NOT set to KILL */ - if (iwl_read32(priv, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) + if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) clear_bit(STATUS_RF_KILL_HW, &priv->status); else set_bit(STATUS_RF_KILL_HW, &priv->status); - if (!test_bit(STATUS_IN_SUSPEND, &priv->status) && - iwl_is_rfkill(priv)) { + if (iwl_is_rfkill(priv)) { + iwl4965_enable_interrupts(priv); IWL_WARNING("Radio disabled by %s RF Kill switch\n", test_bit(STATUS_RF_KILL_HW, &priv->status) ? "HW" : "SW"); - return -ENODEV; + return 0; } iwl_write32(priv, CSR_INT, 0xFFFFFFFF); @@ -2278,11 +2277,6 @@ static int __iwl4965_up(struct iwl_priv *priv) memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, priv->ucode_data.len); - /* We return success when we resume from suspend and rf_kill is on. */ - if (test_bit(STATUS_RF_KILL_HW, &priv->status) || - test_bit(STATUS_RF_KILL_SW, &priv->status)) - return 0; - for (i = 0; i < MAX_HW_RESTARTS; i++) { iwl_clear_stations_table(priv); @@ -2651,6 +2645,9 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw) if (ret) goto out_release_irq; + if (iwl_is_rfkill(priv)) + goto out; + IWL_DEBUG_INFO("Start UP work done.\n"); if (test_bit(STATUS_IN_SUSPEND, &priv->status)) @@ -2670,6 +2667,7 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw) } } +out: priv->is_open = 1; IWL_DEBUG_MAC80211("leave\n"); return 0; -- cgit v1.2.3 From 14652562364dad636ddce2cd11e71702ca21bfbd Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 4 Aug 2008 16:00:46 +0800 Subject: iwlwifi: decrement rx skb counter in scan abort handler This patch decrements rx skb counter in scan abort handler. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-scan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 5a00ac23e2d0..9bb6adb28b73 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -202,6 +202,7 @@ static int iwl_send_scan_abort(struct iwl_priv *priv) clear_bit(STATUS_SCAN_HW, &priv->status); } + priv->alloc_rxb_skb--; dev_kfree_skb_any(cmd.meta.u.skb); return ret; -- cgit v1.2.3 From 2d3db679511be102741cb2d5f8c2b8a1ededdee7 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 4 Aug 2008 16:00:47 +0800 Subject: iwlwifi: grap nic access before accessing periphery registers We need to grap nic access before accessing periphery registers. Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index c5b104fd149c..f3d139b663e6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -241,9 +241,11 @@ static void iwl5000_nic_config(struct iwl_priv *priv) * (PCIe power is lost before PERST# is asserted), * causing ME FW to lose ownership and not being able to obtain it back. */ - iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + iwl_grab_nic_access(priv); + iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS, ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS); + iwl_release_nic_access(priv); spin_unlock_irqrestore(&priv->lock, flags); } -- cgit v1.2.3 From 3e2236c108792c3afbbfbe3f373ee7fdd68eda8e Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Mon, 4 Aug 2008 16:00:48 +0800 Subject: iwl3945: fix merge mistake for packet injection We should allow packets transmission in monitor mode for 3945. The patch fixes a merge error with 2.6.26 kernel. Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index eb41b02b506d..444847ab1b5a 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6589,12 +6589,6 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) IWL_DEBUG_MAC80211("enter\n"); - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { - IWL_DEBUG_MAC80211("leave - monitor\n"); - dev_kfree_skb_any(skb); - return 0; - } - IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); -- cgit v1.2.3 From 22127f246dc37ed5bea0915f7860002ba6d87da7 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 4 Aug 2008 22:18:07 +0200 Subject: kconfig: always write out .config Always write out .config also in the case where config did not change. This fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11230 Signed-off-by: Sam Ravnborg Cc: Josh Boyer Cc: Adrian Bunk --- scripts/kconfig/conf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index 9fba838c7069..36b5eedcdc75 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -596,7 +596,7 @@ int main(int ac, char **av) break; } - if (conf_get_changed() && conf_write(NULL)) { + if (conf_write(NULL)) { fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); exit(1); } -- cgit v1.2.3 From f072181e6403b0fe2e2aa800a005497b748fd284 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 4 Aug 2008 22:29:37 +0200 Subject: kconfig: drop the ""trying to assign nonexistent symbol" warning They really stand out now that make *config is less chatty - and they are generally ignored - so drop them. Signed-off-by: Sam Ravnborg Cc: Roman Zippel Cc: Adrian Bunk --- scripts/kconfig/confdata.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 07597611cc50..df6a188b9930 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -222,10 +222,8 @@ load: continue; if (def == S_DEF_USER) { sym = sym_find(line + 9); - if (!sym) { - conf_warning("trying to assign nonexistent symbol %s", line + 9); + if (!sym) break; - } } else { sym = sym_lookup(line + 9, 0); if (sym->type == S_UNKNOWN) @@ -261,10 +259,8 @@ load: } if (def == S_DEF_USER) { sym = sym_find(line + 7); - if (!sym) { - conf_warning("trying to assign nonexistent symbol %s", line + 7); + if (!sym) break; - } } else { sym = sym_lookup(line + 7, 0); if (sym->type == S_UNKNOWN) -- cgit v1.2.3 From ee694d6b4106ca09dcf23f839b44efd152a1da82 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 4 Aug 2008 13:39:28 -0700 Subject: [IA64] Fix uniprocessor build w.r.t. SGI_XP and SGI_GRU The SGI XP and GRU drivers only work on SMP systems ... the Kconfig file only disallowed them for non-SMP X86. Signed-off-by: Tony Luck --- drivers/misc/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 82af385460e4..a726f3b01a6b 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -427,10 +427,10 @@ config ENCLOSURE_SERVICES config SGI_XP tristate "Support communication between SGI SSIs" depends on NET - depends on IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || (X86_64 && SMP) + depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_64) && SMP select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 - select SGI_GRU if IA64_GENERIC || IA64_SGI_UV || (X86_64 && SMP) + select SGI_GRU if (IA64_GENERIC || IA64_SGI_UV || X86_64) && SMP ---help--- An SGI machine can be divided into multiple Single System Images which act independently of each other and have -- cgit v1.2.3 From a3cf5e6b6f2548b036921da5ab6325dc8a76e207 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 3 Aug 2008 00:01:05 -0700 Subject: sparc64: Need to disable preemption around smp_tsb_sync(). Based upon a bug report by Mariusz Kozlowski It uses smp_call_function_masked() now, which has a preemption-disabled requirement. Signed-off-by: David S. Miller --- arch/sparc64/mm/tsb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 3547937b17a2..587f8efb2e05 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -1,9 +1,10 @@ /* arch/sparc64/mm/tsb.c * - * Copyright (C) 2006 David S. Miller + * Copyright (C) 2006, 2008 David S. Miller */ #include +#include #include #include #include @@ -415,7 +416,9 @@ retry_tsb_alloc: tsb_context_switch(mm); /* Now force other processors to do the same. */ + preempt_disable(); smp_tsb_sync(mm); + preempt_enable(); /* Now it is safe to free the old tsb. */ kmem_cache_free(tsb_caches[old_cache_index], old_tsb); -- cgit v1.2.3 From abd9e6982815ad7bd2c70dbf4cc0c08b48229d6e Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 3 Aug 2008 00:04:13 -0700 Subject: arch/sparc64/kernel/signal.c: removed duplicated #include Removed duplicated #include in arch/sparc64/kernel/signal.c. Signed-off-by: Huang Weiyi Signed-off-by: David S. Miller --- arch/sparc64/kernel/signal.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c index ca5a6ae3a6e2..ec82d76dc6f2 100644 --- a/arch/sparc64/kernel/signal.c +++ b/arch/sparc64/kernel/signal.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3 From 5e0797e5b84408a13260a107e2f7a49ee6342ae4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 3 Aug 2008 22:52:41 -0700 Subject: sparc64: Use function pointer for cross-call sending. Initialize it using the smp_setup_processor_id() hook. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 340842e51ce1..3c6970ad774f 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -756,6 +756,8 @@ dump_cpu_list_and_out: printk("]\n"); } +static void (*xcall_deliver)(u64, u64, u64, cpumask_t); + /* Send cross call to all processors mentioned in MASK * except self. */ @@ -767,12 +769,7 @@ static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 d cpus_and(mask, mask, cpu_online_map); cpu_clear(this_cpu, mask); - if (tlb_type == spitfire) - spitfire_xcall_deliver(data0, data1, data2, mask); - else if (tlb_type == cheetah || tlb_type == cheetah_plus) - cheetah_xcall_deliver(data0, data1, data2, mask); - else - hypervisor_xcall_deliver(data0, data1, data2, mask); + xcall_deliver(data0, data1, data2, mask); /* NOTE: Caller runs local copy on master. */ put_cpu(); @@ -1202,6 +1199,16 @@ void __devinit smp_prepare_boot_cpu(void) { } +void __init smp_setup_processor_id(void) +{ + if (tlb_type == spitfire) + xcall_deliver = spitfire_xcall_deliver; + else if (tlb_type == cheetah || tlb_type == cheetah_plus) + xcall_deliver = cheetah_xcall_deliver; + else + xcall_deliver = hypervisor_xcall_deliver; +} + void __devinit smp_fill_in_sib_core_maps(void) { unsigned int i; -- cgit v1.2.3 From 622824dbb536f7bdc241eefc3e1ae31c463b4eb8 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 3 Aug 2008 23:07:18 -0700 Subject: sparc64: Use xcall_deliver() consistently. There remained some spots still vectoring to the appropriate *_xcall_deliver() function manually. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 40 +++++++++++++++++----------------------- 1 file changed, 17 insertions(+), 23 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 3c6970ad774f..063668feab1e 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -890,29 +890,24 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu) __local_flush_dcache_page(page); } else if (cpu_online(cpu)) { void *pg_addr = page_address(page); - u64 data0; + u64 data0 = 0; if (tlb_type == spitfire) { - data0 = - ((u64)&xcall_flush_dcache_page_spitfire); + data0 = ((u64)&xcall_flush_dcache_page_spitfire); if (page_mapping(page) != NULL) data0 |= ((u64)1 << 32); - spitfire_xcall_deliver(data0, - __pa(pg_addr), - (u64) pg_addr, - mask); } else if (tlb_type == cheetah || tlb_type == cheetah_plus) { #ifdef DCACHE_ALIASING_POSSIBLE - data0 = - ((u64)&xcall_flush_dcache_page_cheetah); - cheetah_xcall_deliver(data0, - __pa(pg_addr), - 0, mask); + data0 = ((u64)&xcall_flush_dcache_page_cheetah); #endif } + if (data0) { + xcall_deliver(data0, __pa(pg_addr), + (u64) pg_addr, mask); #ifdef CONFIG_DEBUG_DCFLUSH - atomic_inc(&dcpage_flushes_xcall); + atomic_inc(&dcpage_flushes_xcall); #endif + } } put_cpu(); @@ -920,10 +915,10 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu) void flush_dcache_page_all(struct mm_struct *mm, struct page *page) { - void *pg_addr = page_address(page); cpumask_t mask = cpu_online_map; - u64 data0; + void *pg_addr; int this_cpu; + u64 data0; if (tlb_type == hypervisor) return; @@ -937,25 +932,24 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page) #endif if (cpus_empty(mask)) goto flush_self; + data0 = 0; + pg_addr = page_address(page); if (tlb_type == spitfire) { data0 = ((u64)&xcall_flush_dcache_page_spitfire); if (page_mapping(page) != NULL) data0 |= ((u64)1 << 32); - spitfire_xcall_deliver(data0, - __pa(pg_addr), - (u64) pg_addr, - mask); } else if (tlb_type == cheetah || tlb_type == cheetah_plus) { #ifdef DCACHE_ALIASING_POSSIBLE data0 = ((u64)&xcall_flush_dcache_page_cheetah); - cheetah_xcall_deliver(data0, - __pa(pg_addr), - 0, mask); #endif } + if (data0) { + xcall_deliver(data0, __pa(pg_addr), + (u64) pg_addr, mask); #ifdef CONFIG_DEBUG_DCFLUSH - atomic_inc(&dcpage_flushes_xcall); + atomic_inc(&dcpage_flushes_xcall); #endif + } flush_self: __local_flush_dcache_page(page); -- cgit v1.2.3 From cd5bc89debb4045d55eeffe325b97f2dfba4ddea Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 3 Aug 2008 23:24:26 -0700 Subject: sparc64: Use cpumask_t pointers and for_each_cpu_mask_nr() in xcall_deliver. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 063668feab1e..868625e3b661 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -459,13 +459,13 @@ again: } } -static inline void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask) +static inline void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) { u64 pstate; int i; __asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate)); - for_each_cpu_mask(i, mask) + for_each_cpu_mask_nr(i, *mask) spitfire_xcall_helper(data0, data1, data2, pstate, i); } @@ -473,14 +473,17 @@ static inline void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, cpuma * packet, but we have no use for that. However we do take advantage of * the new pipelining feature (ie. dispatch to multiple cpus simultaneously). */ -static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask) +static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask_p) { u64 pstate, ver, busy_mask; int nack_busy_id, is_jbus, need_more; + cpumask_t mask; - if (cpus_empty(mask)) + if (cpus_empty(*mask_p)) return; + mask = *mask_p; + /* Unfortunately, someone at Sun had the brilliant idea to make the * busy/nack fields hard-coded by ITID number for this Ultra-III * derivative processor. @@ -511,7 +514,7 @@ retry: { int i; - for_each_cpu_mask(i, mask) { + for_each_cpu_mask_nr(i, mask) { u64 target = (i << 14) | 0x70; if (is_jbus) { @@ -550,7 +553,7 @@ retry: : : "r" (pstate)); if (unlikely(need_more)) { int i, cnt = 0; - for_each_cpu_mask(i, mask) { + for_each_cpu_mask_nr(i, mask) { cpu_clear(i, mask); cnt++; if (cnt == 32) @@ -584,7 +587,7 @@ retry: /* Clear out the mask bits for cpus which did not * NACK us. */ - for_each_cpu_mask(i, mask) { + for_each_cpu_mask_nr(i, mask) { u64 check_mask; if (is_jbus) @@ -605,16 +608,16 @@ retry: } /* Multi-cpu list version. */ -static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask) +static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) { + int cnt, retries, this_cpu, prev_sent, i; + unsigned long flags, status; + cpumask_t error_mask; struct trap_per_cpu *tb; u16 *cpu_list; u64 *mondo; - cpumask_t error_mask; - unsigned long flags, status; - int cnt, retries, this_cpu, prev_sent, i; - if (cpus_empty(mask)) + if (cpus_empty(*mask)) return; /* We have to do this whole thing with interrupts fully disabled. @@ -642,7 +645,7 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t /* Setup the initial cpu list. */ cnt = 0; - for_each_cpu_mask(i, mask) + for_each_cpu_mask_nr(i, *mask) cpu_list[cnt++] = i; cpus_clear(error_mask); @@ -729,7 +732,7 @@ fatal_mondo_cpu_error: "were in error state\n", this_cpu); printk(KERN_CRIT "CPU[%d]: Error mask [ ", this_cpu); - for_each_cpu_mask(i, error_mask) + for_each_cpu_mask_nr(i, error_mask) printk("%d ", i); printk("]\n"); return; @@ -756,7 +759,7 @@ dump_cpu_list_and_out: printk("]\n"); } -static void (*xcall_deliver)(u64, u64, u64, cpumask_t); +static void (*xcall_deliver)(u64, u64, u64, const cpumask_t *); /* Send cross call to all processors mentioned in MASK * except self. @@ -769,7 +772,7 @@ static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 d cpus_and(mask, mask, cpu_online_map); cpu_clear(this_cpu, mask); - xcall_deliver(data0, data1, data2, mask); + xcall_deliver(data0, data1, data2, &mask); /* NOTE: Caller runs local copy on master. */ put_cpu(); @@ -903,7 +906,7 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu) } if (data0) { xcall_deliver(data0, __pa(pg_addr), - (u64) pg_addr, mask); + (u64) pg_addr, &mask); #ifdef CONFIG_DEBUG_DCFLUSH atomic_inc(&dcpage_flushes_xcall); #endif @@ -945,7 +948,7 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page) } if (data0) { xcall_deliver(data0, __pa(pg_addr), - (u64) pg_addr, mask); + (u64) pg_addr, &mask); #ifdef CONFIG_DEBUG_DCFLUSH atomic_inc(&dcpage_flushes_xcall); #endif -- cgit v1.2.3 From 199266305311d060b6e057fa5c7de01f218bb911 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 3 Aug 2008 23:56:28 -0700 Subject: sparc64: Call xcall_deliver() directly in some cases. For these cases the callers make sure: 1) The cpus indicated are online. 2) The current cpu is not in the list of indicated cpus. Therefore we can pass a pointer to the mask directly. One of the motivations in this transformation is to make use of "&cpumask_of_cpu(cpu)" which evaluates to a pointer to constant data in the kernel and thus takes up no stack space. Hopefully someone in the future will change the interface of arch_send_call_function_ipi() such that it passes a const cpumask_t pointer so that this will optimize ever further. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 33 ++++++++++----------------------- 1 file changed, 10 insertions(+), 23 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 868625e3b661..47b0738ea4be 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -792,16 +792,15 @@ extern unsigned long xcall_call_function; void arch_send_call_function_ipi(cpumask_t mask) { - smp_cross_call_masked(&xcall_call_function, 0, 0, 0, mask); + xcall_deliver((u64) &xcall_call_function, 0, 0, &mask); } extern unsigned long xcall_call_function_single; void arch_send_call_function_single_ipi(int cpu) { - cpumask_t mask = cpumask_of_cpu(cpu); - - smp_cross_call_masked(&xcall_call_function_single, 0, 0, 0, mask); + xcall_deliver((u64) &xcall_call_function_single, 0, 0, + &cpumask_of_cpu(cpu)); } /* Send cross call to all processors except self. */ @@ -959,24 +958,6 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page) put_cpu(); } -static void __smp_receive_signal_mask(cpumask_t mask) -{ - smp_cross_call_masked(&xcall_receive_signal, 0, 0, 0, mask); -} - -void smp_receive_signal(int cpu) -{ - cpumask_t mask = cpumask_of_cpu(cpu); - - if (cpu_online(cpu)) - __smp_receive_signal_mask(mask); -} - -void smp_receive_signal_client(int irq, struct pt_regs *regs) -{ - clear_softint(1 << irq); -} - void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs) { struct mm_struct *mm; @@ -1374,7 +1355,13 @@ void __init smp_cpus_done(unsigned int max_cpus) void smp_send_reschedule(int cpu) { - smp_receive_signal(cpu); + xcall_deliver((u64) &xcall_receive_signal, 0, 0, + &cpumask_of_cpu(cpu)); +} + +void smp_receive_signal_client(int irq, struct pt_regs *regs) +{ + clear_softint(1 << irq); } /* This is a nop because we capture all other cpus -- cgit v1.2.3 From 24445a4ac9d3fdd3f96f0ad277cb2ba274470d94 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 00:02:31 -0700 Subject: sparc64: Directly call xcall_deliver() in smp_start_sync_tick_client. We know the cpu is online and not the current cpu here. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 47b0738ea4be..8c9e75dc1e65 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -782,10 +782,8 @@ extern unsigned long xcall_sync_tick; static void smp_start_sync_tick_client(int cpu) { - cpumask_t mask = cpumask_of_cpu(cpu); - - smp_cross_call_masked(&xcall_sync_tick, - 0, 0, 0, mask); + xcall_deliver((u64) &xcall_sync_tick, 0, 0, + &cpumask_of_cpu(cpu)); } extern unsigned long xcall_call_function; -- cgit v1.2.3 From 91a4231cc2efb9134373bb2a93be96a284955607 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 00:51:18 -0700 Subject: sparc64: Make smp_cross_call_masked() take a cpumask_t pointer. Ideally this could be simplified further such that we could pass the pointer down directly into the xcall_deliver() implementation. But if we do that we need to do the "cpu_online(cpu)" and "cpu != self" checks down in those functions. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 8c9e75dc1e65..740259d89552 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -761,15 +761,19 @@ dump_cpu_list_and_out: static void (*xcall_deliver)(u64, u64, u64, const cpumask_t *); -/* Send cross call to all processors mentioned in MASK - * except self. +/* Send cross call to all processors mentioned in MASK_P + * except self. Really, there are only two cases currently, + * "&cpu_online_map" and "&mm->cpu_vm_mask". */ -static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, cpumask_t mask) +static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, const cpumask_t *mask_p) { u64 data0 = (((u64)ctx)<<32 | (((u64)func) & 0xffffffff)); int this_cpu = get_cpu(); + cpumask_t mask; - cpus_and(mask, mask, cpu_online_map); + mask = *mask_p; + if (mask_p != &cpu_online_map) + cpus_and(mask, mask, cpu_online_map); cpu_clear(this_cpu, mask); xcall_deliver(data0, data1, data2, &mask); @@ -803,7 +807,7 @@ void arch_send_call_function_single_ipi(int cpu) /* Send cross call to all processors except self. */ #define smp_cross_call(func, ctx, data1, data2) \ - smp_cross_call_masked(func, ctx, data1, data2, cpu_online_map) + smp_cross_call_masked(func, ctx, data1, data2, &cpu_online_map) void smp_call_function_client(int irq, struct pt_regs *regs) { @@ -1056,7 +1060,7 @@ void smp_flush_tlb_mm(struct mm_struct *mm) smp_cross_call_masked(&xcall_flush_tlb_mm, ctx, 0, 0, - mm->cpu_vm_mask); + &mm->cpu_vm_mask); local_flush_and_out: __flush_tlb_mm(ctx, SECONDARY_CONTEXT); @@ -1074,7 +1078,7 @@ void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long else smp_cross_call_masked(&xcall_flush_tlb_pending, ctx, nr, (unsigned long) vaddrs, - mm->cpu_vm_mask); + &mm->cpu_vm_mask); __flush_tlb_pending(ctx, nr, vaddrs); -- cgit v1.2.3 From bcbd2b65868213c1426654304de3da330cde6b3a Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 4 Aug 2008 15:47:25 -0700 Subject: [IA64] Update generic config Changes to support a new platform in my lab. Signed-off-by: Tony Luck --- arch/ia64/configs/generic_defconfig | 71 ++++++++++++++++++++++++++++++++++--- 1 file changed, 67 insertions(+), 4 deletions(-) diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 133089be5f2e..9f483976228f 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.27-rc1 -# Sat Aug 2 13:24:08 2008 +# Mon Aug 4 15:38:01 2008 # CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -245,7 +245,8 @@ CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m -# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_DOCK=y +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m @@ -548,6 +549,7 @@ CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y +# CONFIG_SCSI_IPR is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set @@ -557,7 +559,67 @@ CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set -# CONFIG_ATA is not set +CONFIG_ATA=y +CONFIG_ATA_NONSTANDARD=y +CONFIG_ATA_ACPI=y +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +CONFIG_ATA_PIIX=y +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ACPI is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -668,7 +730,8 @@ CONFIG_E1000=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set -# CONFIG_IGB is not set +CONFIG_IGB=y +# CONFIG_IGB_LRO is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set -- cgit v1.2.3 From 43f589235e223418d5807ebcddca73ec8a45f52c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 16:13:51 -0700 Subject: sparc64: Always allocate the send mondo blocks, even on non-sun4v. The idea is that we'll use this cpu list array and mondo block even for non-hypervisor platforms. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index c481673d249c..ba43d85e8dde 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -915,12 +915,18 @@ static void __init sun4v_init_mondo_queues(void) alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask); alloc_one_kbuf(&tb->nonresum_kernel_buf_pa, tb->nonresum_qmask); + } +} + +static void __init init_send_mondo_info(void) +{ + int cpu; + + for_each_possible_cpu(cpu) { + struct trap_per_cpu *tb = &trap_block[cpu]; init_cpu_send_mondo_info(tb); } - - /* Load up the boot cpu's entries. */ - sun4v_register_mondo_queues(hard_smp_processor_id()); } static struct irqaction timer_irq_action = { @@ -949,6 +955,13 @@ void __init init_IRQ(void) if (tlb_type == hypervisor) sun4v_init_mondo_queues(); + init_send_mondo_info(); + + if (tlb_type == hypervisor) { + /* Load up the boot cpu's entries. */ + sun4v_register_mondo_queues(hard_smp_processor_id()); + } + /* We need to clear any IRQ's pending in the soft interrupt * registers, a spurious one could be left around from the * PROM timer which we just disabled. -- cgit v1.2.3 From deb16999e452b74011dac5b2fe0d6258df81a2a1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 16:16:20 -0700 Subject: sparc64: Make all xcall_deliver's go through common helper function. This just facilitates the next changeset where we'll be building the cpu list and mondo block in this helper function. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 740259d89552..20f4e291c74a 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -759,7 +759,12 @@ dump_cpu_list_and_out: printk("]\n"); } -static void (*xcall_deliver)(u64, u64, u64, const cpumask_t *); +static void (*xcall_deliver_impl)(u64, u64, u64, const cpumask_t *); + +static void xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) +{ + xcall_deliver_impl(data0, data1, data2, mask); +} /* Send cross call to all processors mentioned in MASK_P * except self. Really, there are only two cases currently, @@ -1182,11 +1187,11 @@ void __devinit smp_prepare_boot_cpu(void) void __init smp_setup_processor_id(void) { if (tlb_type == spitfire) - xcall_deliver = spitfire_xcall_deliver; + xcall_deliver_impl = spitfire_xcall_deliver; else if (tlb_type == cheetah || tlb_type == cheetah_plus) - xcall_deliver = cheetah_xcall_deliver; + xcall_deliver_impl = cheetah_xcall_deliver; else - xcall_deliver = hypervisor_xcall_deliver; + xcall_deliver_impl = hypervisor_xcall_deliver; } void __devinit smp_fill_in_sib_core_maps(void) -- cgit v1.2.3 From c02a5119e862dea9a1361182840d41ae1fe24227 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 16:18:40 -0700 Subject: sparc64: Disable local interrupts around xcall_deliver_impl() invocation. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 20f4e291c74a..6d458b35643c 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -611,7 +611,7 @@ retry: static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) { int cnt, retries, this_cpu, prev_sent, i; - unsigned long flags, status; + unsigned long status; cpumask_t error_mask; struct trap_per_cpu *tb; u16 *cpu_list; @@ -620,18 +620,6 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpum if (cpus_empty(*mask)) return; - /* We have to do this whole thing with interrupts fully disabled. - * Otherwise if we send an xcall from interrupt context it will - * corrupt both our mondo block and cpu list state. - * - * One consequence of this is that we cannot use timeout mechanisms - * that depend upon interrupts being delivered locally. So, for - * example, we cannot sample jiffies and expect it to advance. - * - * Fortunately, udelay() uses %stick/%tick so we can use that. - */ - local_irq_save(flags); - this_cpu = smp_processor_id(); tb = &trap_block[this_cpu]; @@ -720,8 +708,6 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpum } } while (1); - local_irq_restore(flags); - if (unlikely(!cpus_empty(error_mask))) goto fatal_mondo_cpu_error; @@ -738,14 +724,12 @@ fatal_mondo_cpu_error: return; fatal_mondo_timeout: - local_irq_restore(flags); printk(KERN_CRIT "CPU[%d]: SUN4V mondo timeout, no forward " " progress after %d retries.\n", this_cpu, retries); goto dump_cpu_list_and_out; fatal_mondo_error: - local_irq_restore(flags); printk(KERN_CRIT "CPU[%d]: Unexpected SUN4V mondo error %lu\n", this_cpu, status); printk(KERN_CRIT "CPU[%d]: Args were cnt(%d) cpulist_pa(%lx) " @@ -763,7 +747,21 @@ static void (*xcall_deliver_impl)(u64, u64, u64, const cpumask_t *); static void xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) { + unsigned long flags; + + /* We have to do this whole thing with interrupts fully disabled. + * Otherwise if we send an xcall from interrupt context it will + * corrupt both our mondo block and cpu list state. + * + * One consequence of this is that we cannot use timeout mechanisms + * that depend upon interrupts being delivered locally. So, for + * example, we cannot sample jiffies and expect it to advance. + * + * Fortunately, udelay() uses %stick/%tick so we can use that. + */ + local_irq_save(flags); xcall_deliver_impl(data0, data1, data2, mask); + local_irq_restore(flags); } /* Send cross call to all processors mentioned in MASK_P -- cgit v1.2.3 From fca082c9f1e11ec07efa8d2f9f13688521253f36 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 4 Aug 2008 16:36:20 -0700 Subject: Revert "[SCSI] extend the last_sector_bug flag to cover more sectors" This reverts commit 2b142900784c6e38c8d39fa57d5f95ef08e735d8, since it seems to break some other USB storage devices (at least a JMicron USB to ATA bridge). As such, while it apparently fixes some cardreaders, it would need to be made conditional on the exact reader it fixes in order to avoid causing regressions. Cc: Alan Jenkins Cc: James Bottomley Signed-off-by: Linus Torvalds --- drivers/scsi/sd.c | 21 ++++++--------------- drivers/scsi/sd.h | 6 ------ include/scsi/scsi_device.h | 3 +-- 3 files changed, 7 insertions(+), 23 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index e5e7d7856454..8e08d51a0f05 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -375,7 +375,6 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) struct gendisk *disk = rq->rq_disk; struct scsi_disk *sdkp; sector_t block = rq->sector; - sector_t threshold; unsigned int this_count = rq->nr_sectors; unsigned int timeout = sdp->timeout; int ret; @@ -423,21 +422,13 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) } /* - * Some SD card readers can't handle multi-sector accesses which touch - * the last one or two hardware sectors. Split accesses as needed. + * Some devices (some sdcards for one) don't like it if the + * last sector gets read in a larger then 1 sector read. */ - threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS * - (sdp->sector_size / 512); - - if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) { - if (block < threshold) { - /* Access up to the threshold but not beyond */ - this_count = threshold - block; - } else { - /* Access only a single hardware sector */ - this_count = sdp->sector_size / 512; - } - } + if (unlikely(sdp->last_sector_bug && + rq->nr_sectors > sdp->sector_size / 512 && + block + this_count == get_capacity(disk))) + this_count -= sdp->sector_size / 512; SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n", (unsigned long long)block)); diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 95b9f06534d5..550b2f70a1f8 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -31,12 +31,6 @@ */ #define SD_BUF_SIZE 512 -/* - * Number of sectors at the end of the device to avoid multi-sector - * accesses to in the case of last_sector_bug - */ -#define SD_LAST_BUGGY_SECTORS 8 - struct scsi_disk { struct scsi_driver *driver; /* always &sd_template */ struct scsi_device *device; diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 291d56a19167..9cecc409f0f8 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -140,8 +140,7 @@ struct scsi_device { unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */ unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */ unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */ - unsigned last_sector_bug:1; /* do not use multisector accesses on - SD_LAST_BUGGY_SECTORS */ + unsigned last_sector_bug:1; /* Always read last sector in a 1 sector read */ DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */ struct list_head event_list; /* asserted events */ -- cgit v1.2.3 From 90f7ae8a55190f5edfb9fda957e25c994ed39ec4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 16:42:58 -0700 Subject: sparc64: Build cpu list and mondo block at top-level xcall_deliver(). Then modify all of the xcall dispatch implementations get passed and use this information. Now all of the xcall dispatch implementations do not need to be mindful of details such as "is current cpu in the list?" and "is cpu online?" Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 113 ++++++++++++++++++++++++++++------------------ 1 file changed, 69 insertions(+), 44 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 6d458b35643c..2387a9b81be7 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -459,30 +459,35 @@ again: } } -static inline void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) +static void spitfire_xcall_deliver(struct trap_per_cpu *tb, int cnt) { + u64 *mondo, data0, data1, data2; + u16 *cpu_list; u64 pstate; int i; __asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate)); - for_each_cpu_mask_nr(i, *mask) - spitfire_xcall_helper(data0, data1, data2, pstate, i); + cpu_list = __va(tb->cpu_list_pa); + mondo = __va(tb->cpu_mondo_block_pa); + data0 = mondo[0]; + data1 = mondo[1]; + data2 = mondo[2]; + for (i = 0; i < cnt; i++) + spitfire_xcall_helper(data0, data1, data2, pstate, cpu_list[i]); } /* Cheetah now allows to send the whole 64-bytes of data in the interrupt * packet, but we have no use for that. However we do take advantage of * the new pipelining feature (ie. dispatch to multiple cpus simultaneously). */ -static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask_p) +static void cheetah_xcall_deliver(struct trap_per_cpu *tb, int cnt) { - u64 pstate, ver, busy_mask; int nack_busy_id, is_jbus, need_more; - cpumask_t mask; - - if (cpus_empty(*mask_p)) - return; + u64 *mondo, pstate, ver, busy_mask; + u16 *cpu_list; - mask = *mask_p; + cpu_list = __va(tb->cpu_list_pa); + mondo = __va(tb->cpu_mondo_block_pa); /* Unfortunately, someone at Sun had the brilliant idea to make the * busy/nack fields hard-coded by ITID number for this Ultra-III @@ -505,7 +510,7 @@ retry: "stxa %2, [%5] %6\n\t" "membar #Sync\n\t" : /* no outputs */ - : "r" (data0), "r" (data1), "r" (data2), + : "r" (mondo[0]), "r" (mondo[1]), "r" (mondo[2]), "r" (0x40), "r" (0x50), "r" (0x60), "i" (ASI_INTR_W)); @@ -514,11 +519,16 @@ retry: { int i; - for_each_cpu_mask_nr(i, mask) { - u64 target = (i << 14) | 0x70; + for (i = 0; i < cnt; i++) { + u64 target, nr; + + nr = cpu_list[i]; + if (nr == 0xffff) + continue; + target = (nr << 14) | 0x70; if (is_jbus) { - busy_mask |= (0x1UL << (i * 2)); + busy_mask |= (0x1UL << (nr * 2)); } else { target |= (nack_busy_id << 24); busy_mask |= (0x1UL << @@ -552,11 +562,13 @@ retry: __asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate)); if (unlikely(need_more)) { - int i, cnt = 0; - for_each_cpu_mask_nr(i, mask) { - cpu_clear(i, mask); - cnt++; - if (cnt == 32) + int i, this_cnt = 0; + for (i = 0; i < cnt; i++) { + if (cpu_list[i] == 0xffff) + continue; + cpu_list[i] = 0xffff; + this_cnt++; + if (this_cnt == 32) break; } goto retry; @@ -587,16 +599,20 @@ retry: /* Clear out the mask bits for cpus which did not * NACK us. */ - for_each_cpu_mask_nr(i, mask) { - u64 check_mask; + for (i = 0; i < cnt; i++) { + u64 check_mask, nr; + + nr = cpu_list[i]; + if (nr == 0xffff) + continue; if (is_jbus) - check_mask = (0x2UL << (2*i)); + check_mask = (0x2UL << (2*nr)); else check_mask = (0x2UL << this_busy_nack); if ((dispatch_stat & check_mask) == 0) - cpu_clear(i, mask); + cpu_list[i] = 0xffff; this_busy_nack += 2; if (this_busy_nack == 64) break; @@ -608,34 +624,17 @@ retry: } /* Multi-cpu list version. */ -static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) +static void hypervisor_xcall_deliver(struct trap_per_cpu *tb, int cnt) { - int cnt, retries, this_cpu, prev_sent, i; + int retries, this_cpu, prev_sent, i; unsigned long status; cpumask_t error_mask; - struct trap_per_cpu *tb; u16 *cpu_list; - u64 *mondo; - - if (cpus_empty(*mask)) - return; this_cpu = smp_processor_id(); - tb = &trap_block[this_cpu]; - - mondo = __va(tb->cpu_mondo_block_pa); - mondo[0] = data0; - mondo[1] = data1; - mondo[2] = data2; - wmb(); cpu_list = __va(tb->cpu_list_pa); - /* Setup the initial cpu list. */ - cnt = 0; - for_each_cpu_mask_nr(i, *mask) - cpu_list[cnt++] = i; - cpus_clear(error_mask); retries = 0; prev_sent = 0; @@ -743,11 +742,15 @@ dump_cpu_list_and_out: printk("]\n"); } -static void (*xcall_deliver_impl)(u64, u64, u64, const cpumask_t *); +static void (*xcall_deliver_impl)(struct trap_per_cpu *, int); static void xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) { + struct trap_per_cpu *tb; + int this_cpu, i, cnt; unsigned long flags; + u16 *cpu_list; + u64 *mondo; /* We have to do this whole thing with interrupts fully disabled. * Otherwise if we send an xcall from interrupt context it will @@ -760,7 +763,29 @@ static void xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask * Fortunately, udelay() uses %stick/%tick so we can use that. */ local_irq_save(flags); - xcall_deliver_impl(data0, data1, data2, mask); + + this_cpu = smp_processor_id(); + tb = &trap_block[this_cpu]; + + mondo = __va(tb->cpu_mondo_block_pa); + mondo[0] = data0; + mondo[1] = data1; + mondo[2] = data2; + wmb(); + + cpu_list = __va(tb->cpu_list_pa); + + /* Setup the initial cpu list. */ + cnt = 0; + for_each_cpu_mask_nr(i, *mask) { + if (i == this_cpu || !cpu_online(i)) + continue; + cpu_list[cnt++] = i; + } + + if (cnt) + xcall_deliver_impl(tb, cnt); + local_irq_restore(flags); } -- cgit v1.2.3 From ed4d9c66eb941a416c8cb9a0138c69d46d82fc4f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 16:47:57 -0700 Subject: sparc64: Kill error_mask from hypervisor_xcall_deliver(). It can eat up a lot of stack space when NR_CPUS is large. We retain some of it's functionality by reporting at least one of the cpu's which are seen in error state. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 2387a9b81be7..ac8996ec97be 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -626,16 +626,15 @@ retry: /* Multi-cpu list version. */ static void hypervisor_xcall_deliver(struct trap_per_cpu *tb, int cnt) { - int retries, this_cpu, prev_sent, i; + int retries, this_cpu, prev_sent, i, saw_cpu_error; unsigned long status; - cpumask_t error_mask; u16 *cpu_list; this_cpu = smp_processor_id(); cpu_list = __va(tb->cpu_list_pa); - cpus_clear(error_mask); + saw_cpu_error = 0; retries = 0; prev_sent = 0; do { @@ -680,10 +679,9 @@ static void hypervisor_xcall_deliver(struct trap_per_cpu *tb, int cnt) continue; err = sun4v_cpu_state(cpu); - if (err >= 0 && - err == HV_CPU_STATE_ERROR) { + if (err == HV_CPU_STATE_ERROR) { + saw_cpu_error = (cpu + 1); cpu_list[i] = 0xffff; - cpu_set(cpu, error_mask); } } } else if (unlikely(status != HV_EWOULDBLOCK)) @@ -707,19 +705,15 @@ static void hypervisor_xcall_deliver(struct trap_per_cpu *tb, int cnt) } } while (1); - if (unlikely(!cpus_empty(error_mask))) + if (unlikely(saw_cpu_error)) goto fatal_mondo_cpu_error; return; fatal_mondo_cpu_error: printk(KERN_CRIT "CPU[%d]: SUN4V mondo cpu error, some target cpus " - "were in error state\n", - this_cpu); - printk(KERN_CRIT "CPU[%d]: Error mask [ ", this_cpu); - for_each_cpu_mask_nr(i, error_mask) - printk("%d ", i); - printk("]\n"); + "(including %d) were in error state\n", + this_cpu, saw_cpu_error - 1); return; fatal_mondo_timeout: -- cgit v1.2.3 From 1a3f7d98e5f50f21ce6fb1406a35531d9596c5c6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 4 Aug 2008 16:50:38 -0700 Subject: Revert "UFS: add const to parser token table" This reverts commit f9247273cb69ba101877e946d2d83044409cc8c5 (and fb2e405fc1fc8b20d9c78eaa1c7fd5a297efde43 - "fix fs/nfs/nfsroot.c compilation" - that fixed a missed conversion). The changes cause problems for at least the sparc build. Let's re-do them when the exact issues are resolved. Requested-by: Andrew Morton Requested-by: Steven Whitehouse Cc: David Miller Signed-off-by: Linus Torvalds --- fs/nfs/nfsroot.c | 2 +- fs/ufs/super.c | 2 +- include/linux/parser.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c index 8478fc25daee..46763d1cd397 100644 --- a/fs/nfs/nfsroot.c +++ b/fs/nfs/nfsroot.c @@ -127,7 +127,7 @@ enum { Opt_err }; -static match_table_t __initconst tokens = { +static match_table_t __initdata tokens = { {Opt_port, "port=%u"}, {Opt_rsize, "rsize=%u"}, {Opt_wsize, "wsize=%u"}, diff --git a/fs/ufs/super.c b/fs/ufs/super.c index 3e30e40aa24d..3141969b456d 100644 --- a/fs/ufs/super.c +++ b/fs/ufs/super.c @@ -1233,7 +1233,7 @@ static int ufs_show_options(struct seq_file *seq, struct vfsmount *vfs) { struct ufs_sb_info *sbi = UFS_SB(vfs->mnt_sb); unsigned mval = sbi->s_mount_opt & UFS_MOUNT_UFSTYPE; - const struct match_token *tp = tokens; + struct match_token *tp = tokens; while (tp->token != Opt_onerror_panic && tp->token != mval) ++tp; diff --git a/include/linux/parser.h b/include/linux/parser.h index cc554ca8bc78..7dcd05075756 100644 --- a/include/linux/parser.h +++ b/include/linux/parser.h @@ -14,7 +14,7 @@ struct match_token { const char *pattern; }; -typedef const struct match_token match_table_t[]; +typedef struct match_token match_table_t[]; /* Maximum number of arguments that match_token will find in a pattern */ enum {MAX_OPT_ARGS = 3}; -- cgit v1.2.3 From ae583885bfd07474789059cdef399289bd66c8d0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 16:56:15 -0700 Subject: sparc64: Remove all cpumask_t local variables in xcall dispatch. All of the xcall delivery implementation is cpumask agnostic, so we can pass around pointers to const cpumask_t objects everywhere. The sad remaining case is the argument to arch_send_call_function_ipi(). Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 33 +++++++++------------------------ 1 file changed, 9 insertions(+), 24 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index ac8996ec97be..27b81775a4de 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -787,21 +787,17 @@ static void xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask * except self. Really, there are only two cases currently, * "&cpu_online_map" and "&mm->cpu_vm_mask". */ -static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, const cpumask_t *mask_p) +static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, const cpumask_t *mask) { u64 data0 = (((u64)ctx)<<32 | (((u64)func) & 0xffffffff)); - int this_cpu = get_cpu(); - cpumask_t mask; - mask = *mask_p; - if (mask_p != &cpu_online_map) - cpus_and(mask, mask, cpu_online_map); - cpu_clear(this_cpu, mask); - - xcall_deliver(data0, data1, data2, &mask); - /* NOTE: Caller runs local copy on master. */ + xcall_deliver(data0, data1, data2, mask); +} - put_cpu(); +/* Send cross call to all processors except self. */ +static void smp_cross_call(unsigned long *func, u32 ctx, u64 data1, u64 data2) +{ + smp_cross_call_masked(func, ctx, data1, data2, &cpu_online_map); } extern unsigned long xcall_sync_tick; @@ -827,10 +823,6 @@ void arch_send_call_function_single_ipi(int cpu) &cpumask_of_cpu(cpu)); } -/* Send cross call to all processors except self. */ -#define smp_cross_call(func, ctx, data1, data2) \ - smp_cross_call_masked(func, ctx, data1, data2, &cpu_online_map) - void smp_call_function_client(int irq, struct pt_regs *regs) { clear_softint(1 << irq); @@ -900,7 +892,6 @@ static inline void __local_flush_dcache_page(struct page *page) void smp_flush_dcache_page_impl(struct page *page, int cpu) { - cpumask_t mask = cpumask_of_cpu(cpu); int this_cpu; if (tlb_type == hypervisor) @@ -929,7 +920,7 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu) } if (data0) { xcall_deliver(data0, __pa(pg_addr), - (u64) pg_addr, &mask); + (u64) pg_addr, &cpumask_of_cpu(cpu)); #ifdef CONFIG_DEBUG_DCFLUSH atomic_inc(&dcpage_flushes_xcall); #endif @@ -941,7 +932,6 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu) void flush_dcache_page_all(struct mm_struct *mm, struct page *page) { - cpumask_t mask = cpu_online_map; void *pg_addr; int this_cpu; u64 data0; @@ -951,13 +941,9 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page) this_cpu = get_cpu(); - cpu_clear(this_cpu, mask); - #ifdef CONFIG_DEBUG_DCFLUSH atomic_inc(&dcpage_flushes); #endif - if (cpus_empty(mask)) - goto flush_self; data0 = 0; pg_addr = page_address(page); if (tlb_type == spitfire) { @@ -971,12 +957,11 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page) } if (data0) { xcall_deliver(data0, __pa(pg_addr), - (u64) pg_addr, &mask); + (u64) pg_addr, &cpu_online_map); #ifdef CONFIG_DEBUG_DCFLUSH atomic_inc(&dcpage_flushes_xcall); #endif } - flush_self: __local_flush_dcache_page(page); put_cpu(); -- cgit v1.2.3 From 5aa6cf302c2758702348aab7457e516d3a5121b9 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 4 Aug 2008 13:41:10 -0700 Subject: spi: S3C24XX: reset register status on resume. Fix a bug in the spi_s3c24xx driver where it does not reset the registers of the hardware when resuming from suspend (this block has been reset over suspend). Signed-off-by: Ben Dooks Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_s3c24xx.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 1c643c9e1f15..21661c7959c8 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -236,6 +236,19 @@ static irqreturn_t s3c24xx_spi_irq(int irq, void *dev) return IRQ_HANDLED; } +static void s3c24xx_spi_initialsetup(struct s3c24xx_spi *hw) +{ + /* for the moment, permanently enable the clock */ + + clk_enable(hw->clk); + + /* program defaults into the registers */ + + writeb(0xff, hw->regs + S3C2410_SPPRE); + writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN); + writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON); +} + static int __init s3c24xx_spi_probe(struct platform_device *pdev) { struct s3c2410_spi_info *pdata; @@ -327,15 +340,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev) goto err_no_clk; } - /* for the moment, permanently enable the clock */ - - clk_enable(hw->clk); - - /* program defaults into the registers */ - - writeb(0xff, hw->regs + S3C2410_SPPRE); - writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN); - writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON); + s3c24xx_spi_initialsetup(hw); /* setup any gpio we can */ @@ -415,7 +420,7 @@ static int s3c24xx_spi_resume(struct platform_device *pdev) { struct s3c24xx_spi *hw = platform_get_drvdata(pdev); - clk_enable(hw->clk); + s3c24xx_spi_initialsetup(hw); return 0; } -- cgit v1.2.3 From dc329442b9fd365bec95718013586c07ff600c34 Mon Sep 17 00:00:00 2001 From: Gerard Kam Date: Mon, 4 Aug 2008 13:41:12 -0700 Subject: atmel_spi: fix hang due to missed interrupt For some time my at91sam9260 board with JFFS2 on serial flash (m25p80) would hang when accessing the serial flash and SPI bus. Slowing the SPI clock down to 9 MHz reduced the occurrence of the hang from "always" during boot to a nuisance level that allowed other SW development to continue. Finally had to address this issue when an application stresses the I/O to always cause a hang. Hang seems to be caused by a missed SPI interrupt, so that the task ends up waiting forever after calling spi_sync(). The fix has 2 parts. First is to halt the DMA engine before the "current" PDC registers are loaded. This ensures that the "next" registers are loaded before the DMA operation takes off. The second part of the fix is a kludge that adds a "completion" interrupt in case the ENDRX interrupt for the last segment of the DMA chaining operation was missed. The patch allows the SPI clock for the serial flash to be increased from 9 MHz to 15 MHz (or more?). No hangs or SPI overruns were encountered. Haavard: while this patch does indeed improve things, I still see overruns and CRC errors on my NGW100 board when running the DataFlash at 10 MHz. However, I think some improvement is better than nothing, so I'm passing this on for inclusion in 2.6.27. Signed-off-by: Gerard Kam Signed-off-by: Haavard Skinnemoen Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/atmel_spi.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 0c7165660853..95190c619c10 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -184,7 +184,8 @@ static void atmel_spi_next_xfer(struct spi_master *master, { struct atmel_spi *as = spi_master_get_devdata(master); struct spi_transfer *xfer; - u32 len, remaining, total; + u32 len, remaining; + u32 ieval; dma_addr_t tx_dma, rx_dma; if (!as->current_transfer) @@ -197,6 +198,8 @@ static void atmel_spi_next_xfer(struct spi_master *master, xfer = NULL; if (xfer) { + spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); + len = xfer->len; atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); remaining = xfer->len - len; @@ -234,6 +237,8 @@ static void atmel_spi_next_xfer(struct spi_master *master, as->next_transfer = xfer; if (xfer) { + u32 total; + total = len; atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); as->next_remaining_bytes = total - len; @@ -250,9 +255,11 @@ static void atmel_spi_next_xfer(struct spi_master *master, " next xfer %p: len %u tx %p/%08x rx %p/%08x\n", xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, xfer->rx_buf, xfer->rx_dma); + ieval = SPI_BIT(ENDRX) | SPI_BIT(OVRES); } else { spi_writel(as, RNCR, 0); spi_writel(as, TNCR, 0); + ieval = SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES); } /* REVISIT: We're waiting for ENDRX before we start the next @@ -265,7 +272,7 @@ static void atmel_spi_next_xfer(struct spi_master *master, * * It should be doable, though. Just not now... */ - spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES)); + spi_writel(as, IER, ieval); spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN)); } @@ -396,7 +403,7 @@ atmel_spi_interrupt(int irq, void *dev_id) ret = IRQ_HANDLED; - spi_writel(as, IDR, (SPI_BIT(ENDTX) | SPI_BIT(ENDRX) + spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES))); /* @@ -418,7 +425,7 @@ atmel_spi_interrupt(int irq, void *dev_id) if (xfer->delay_usecs) udelay(xfer->delay_usecs); - dev_warn(master->dev.parent, "fifo overrun (%u/%u remaining)\n", + dev_warn(master->dev.parent, "overrun (%u/%u remaining)\n", spi_readl(as, TCR), spi_readl(as, RCR)); /* @@ -442,7 +449,7 @@ atmel_spi_interrupt(int irq, void *dev_id) spi_readl(as, SR); atmel_spi_msg_done(master, as, msg, -EIO, 0); - } else if (pending & SPI_BIT(ENDRX)) { + } else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) { ret = IRQ_HANDLED; spi_writel(as, IDR, pending); -- cgit v1.2.3 From a477097d9c37c1cf289c7f0257dffcfa42d50197 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Mon, 4 Aug 2008 13:41:14 -0700 Subject: mlock() fix return values Halesh says: Please find the below testcase provide to test mlock. Test Case : =========================== #include #include #include #include #include #include #include #include #include int main(void) { int fd,ret, i = 0; char *addr, *addr1 = NULL; unsigned int page_size; struct rlimit rlim; if (0 != geteuid()) { printf("Execute this pgm as root\n"); exit(1); } /* create a file */ if ((fd = open("mmap_test.c",O_RDWR|O_CREAT,0755)) == -1) { printf("cant create test file\n"); exit(1); } page_size = sysconf(_SC_PAGE_SIZE); /* set the MEMLOCK limit */ rlim.rlim_cur = 2000; rlim.rlim_max = 2000; if ((ret = setrlimit(RLIMIT_MEMLOCK,&rlim)) != 0) { printf("Cant change limit values\n"); exit(1); } addr = 0; while (1) { /* map a page into memory each time*/ if ((addr = (char *) mmap(addr,page_size, PROT_READ | PROT_WRITE,MAP_SHARED,fd,0)) == MAP_FAILED) { printf("cant do mmap on file\n"); exit(1); } if (0 == i) addr1 = addr; i++; errno = 0; /* lock the mapped memory pagewise*/ if ((ret = mlock((char *)addr, 1500)) == -1) { printf("errno value is %d\n", errno); printf("cant lock maped region\n"); exit(1); } addr = addr + page_size; } } ====================================================== This testcase results in an mlock() failure with errno 14 that is EFAULT, but it has nowhere been specified that mlock() will return EFAULT. When I tested the same on older kernels like 2.6.18, I got the correct result i.e errno 12 (ENOMEM). I think in source code mlock(2), setting errno ENOMEM has been missed in do_mlock() , on mlock_fixup() failure. SUSv3 requires the following behavior frmo mlock(2). [ENOMEM] Some or all of the address range specified by the addr and len arguments does not correspond to valid mapped pages in the address space of the process. [EAGAIN] Some or all of the memory identified by the operation could not be locked when the call was made. This rule isn't so nice and slighly strange. but many people think POSIX/SUS compliance is important. Reported-by: Halesh Sadashiv Tested-by: Halesh Sadashiv Signed-off-by: KOSAKI Motohiro Cc: [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory.c | 16 +++++++++++++--- mm/mlock.c | 2 -- 2 files changed, 13 insertions(+), 5 deletions(-) diff --git a/mm/memory.c b/mm/memory.c index 6793b9c68107..a472bcd4b061 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -2765,16 +2765,26 @@ int make_pages_present(unsigned long addr, unsigned long end) vma = find_vma(current->mm, addr); if (!vma) - return -1; + return -ENOMEM; write = (vma->vm_flags & VM_WRITE) != 0; BUG_ON(addr >= end); BUG_ON(end > vma->vm_end); len = DIV_ROUND_UP(end, PAGE_SIZE) - addr/PAGE_SIZE; ret = get_user_pages(current, current->mm, addr, len, write, 0, NULL, NULL); - if (ret < 0) + if (ret < 0) { + /* + SUS require strange return value to mlock + - invalid addr generate to ENOMEM. + - out of memory should generate EAGAIN. + */ + if (ret == -EFAULT) + ret = -ENOMEM; + else if (ret == -ENOMEM) + ret = -EAGAIN; return ret; - return ret == len ? 0 : -1; + } + return ret == len ? 0 : -ENOMEM; } #if !defined(__HAVE_ARCH_GATE_AREA) diff --git a/mm/mlock.c b/mm/mlock.c index 7b2656055d6a..01fbe93eff5c 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -78,8 +78,6 @@ success: mm->locked_vm -= pages; out: - if (ret == -ENOMEM) - ret = -EAGAIN; return ret; } -- cgit v1.2.3 From c2d5cedadcd3976cfc1fa5590e3a73a059c6401a Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sat, 2 Aug 2008 21:10:23 +0800 Subject: drivers/char/efirtc.c: removed duplicated #include Removed duplicated include in drivers/char/efirtc.c. Signed-off-by: Huang Weiyi Signed-off-by: Linus Torvalds --- drivers/char/efirtc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c index 67fbd7aab5db..34d15d548236 100644 --- a/drivers/char/efirtc.c +++ b/drivers/char/efirtc.c @@ -37,7 +37,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3 From 82e68f7ffec3800425f2391c8c86277606860442 Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Sat, 2 Aug 2008 18:25:16 +0200 Subject: sound: ensure device number is valid in snd_seq_oss_synth_make_info snd_seq_oss_synth_make_info() incorrectly reports information to userspace without first checking for the validity of the device number, leading to possible information leak (CVE-2008-3272). Reported-By: Tobias Klein Acked-and-tested-by: Takashi Iwai Cc: stable@kernel.org Signed-off-by: Willy Tarreau Signed-off-by: Linus Torvalds --- sound/core/seq/oss/seq_oss_synth.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/core/seq/oss/seq_oss_synth.c b/sound/core/seq/oss/seq_oss_synth.c index 558dadbf45f1..e024e4588b82 100644 --- a/sound/core/seq/oss/seq_oss_synth.c +++ b/sound/core/seq/oss/seq_oss_synth.c @@ -604,6 +604,9 @@ snd_seq_oss_synth_make_info(struct seq_oss_devinfo *dp, int dev, struct synth_in { struct seq_oss_synth *rec; + if (dev < 0 || dev >= dp->max_synthdev) + return -ENXIO; + if (dp->synths[dev].is_midi) { struct midi_info minf; snd_seq_oss_midi_make_info(dp, dp->synths[dev].midi_mapped, &minf); -- cgit v1.2.3 From b1cbefe5d5fc2d4a6109961d914027172ce8e152 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:22:11 +0100 Subject: blackfin: Fix compile failure in tty code Blackfin peers into the ldisc in an odd way for IRDA snooping which therefore got missed. Simple enough fix. Closes bug #11233 Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 9d8543762a30..efcd44344fb1 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -817,7 +817,7 @@ static void bfin_serial_set_ldisc(struct uart_port *port) if (line >= port->info->port.tty->driver->num) return; - switch (port->info->port.tty->ldisc.num) { + switch (port->info->port.tty->termios->c_line) { case N_IRDA: val = UART_GET_GCTL(&bfin_serial_ports[line]); val |= (IREN | RPOLC); -- cgit v1.2.3 From d7283353221e73a793847252d063ff9186885160 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:21:18 +0100 Subject: cris: Fixup compile problems It now compiles with the tty changes but isn't tested (which has to be better than not compiling.. Closes bug #11218 Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/crisv10.c | 79 ++++++++++++++++++++++++------------------------ drivers/serial/crisv10.h | 3 +- 2 files changed, 42 insertions(+), 40 deletions(-) diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 8249ac490559..bf94a770bb44 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -234,7 +234,7 @@ unsigned long r_alt_ser_baudrate_shadow = 0; static struct e100_serial rs_table[] = { { .baud = DEF_BAUD, - .port = (unsigned char *)R_SERIAL0_CTRL, + .ioport = (unsigned char *)R_SERIAL0_CTRL, .irq = 1U << 12, /* uses DMA 6 and 7 */ .oclrintradr = R_DMA_CH6_CLR_INTR, .ofirstadr = R_DMA_CH6_FIRST, @@ -288,7 +288,7 @@ static struct e100_serial rs_table[] = { }, /* ttyS0 */ #ifndef CONFIG_SVINTO_SIM { .baud = DEF_BAUD, - .port = (unsigned char *)R_SERIAL1_CTRL, + .ioport = (unsigned char *)R_SERIAL1_CTRL, .irq = 1U << 16, /* uses DMA 8 and 9 */ .oclrintradr = R_DMA_CH8_CLR_INTR, .ofirstadr = R_DMA_CH8_FIRST, @@ -344,7 +344,7 @@ static struct e100_serial rs_table[] = { }, /* ttyS1 */ { .baud = DEF_BAUD, - .port = (unsigned char *)R_SERIAL2_CTRL, + .ioport = (unsigned char *)R_SERIAL2_CTRL, .irq = 1U << 4, /* uses DMA 2 and 3 */ .oclrintradr = R_DMA_CH2_CLR_INTR, .ofirstadr = R_DMA_CH2_FIRST, @@ -398,7 +398,7 @@ static struct e100_serial rs_table[] = { }, /* ttyS2 */ { .baud = DEF_BAUD, - .port = (unsigned char *)R_SERIAL3_CTRL, + .ioport = (unsigned char *)R_SERIAL3_CTRL, .irq = 1U << 8, /* uses DMA 4 and 5 */ .oclrintradr = R_DMA_CH4_CLR_INTR, .ofirstadr = R_DMA_CH4_FIRST, @@ -939,7 +939,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] = /* Output */ #define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK) /* Input */ -#define E100_CTS_GET(info) ((info)->port[REG_STATUS] & E100_CTS_MASK) +#define E100_CTS_GET(info) ((info)->ioport[REG_STATUS] & E100_CTS_MASK) /* These are typically PA or PB and 0 means 0V, 1 means 3.3V */ /* Is an output */ @@ -1092,7 +1092,7 @@ e100_rts(struct e100_serial *info, int set) local_irq_save(flags); info->rx_ctrl &= ~E100_RTS_MASK; info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */ - info->port[REG_REC_CTRL] = info->rx_ctrl; + info->ioport[REG_REC_CTRL] = info->rx_ctrl; local_irq_restore(flags); #ifdef SERIAL_DEBUG_IO printk("ser%i rts %i\n", info->line, set); @@ -1142,7 +1142,7 @@ e100_disable_rx(struct e100_serial *info) { #ifndef CONFIG_SVINTO_SIM /* disable the receiver */ - info->port[REG_REC_CTRL] = + info->ioport[REG_REC_CTRL] = (info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); #endif } @@ -1152,7 +1152,7 @@ e100_enable_rx(struct e100_serial *info) { #ifndef CONFIG_SVINTO_SIM /* enable the receiver */ - info->port[REG_REC_CTRL] = + info->ioport[REG_REC_CTRL] = (info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); #endif } @@ -1490,7 +1490,7 @@ rs_stop(struct tty_struct *tty) xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); } - *((unsigned long *)&info->port[REG_XOFF]) = xoff; + *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; local_irq_restore(flags); } } @@ -1513,7 +1513,7 @@ rs_start(struct tty_struct *tty) xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); } - *((unsigned long *)&info->port[REG_XOFF]) = xoff; + *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; if (!info->uses_dma_out && info->xmit.head != info->xmit.tail && info->xmit.buf) e100_enable_serial_tx_ready_irq(info); @@ -1888,7 +1888,7 @@ static void receive_chars_dma(struct e100_serial *info) handle_all_descr_data(info); /* Read the status register to detect errors */ - rstat = info->port[REG_STATUS]; + rstat = info->ioport[REG_STATUS]; if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat)); } @@ -1897,7 +1897,7 @@ static void receive_chars_dma(struct e100_serial *info) /* If we got an error, we must reset it by reading the * data_in field */ - unsigned char data = info->port[REG_DATA]; + unsigned char data = info->ioport[REG_DATA]; PROCSTAT(ser_stat[info->line].errors_cnt++); DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n", @@ -2077,7 +2077,7 @@ static int force_eop_if_needed(struct e100_serial *info) /* We check data_avail bit to determine if data has * arrived since last time */ - unsigned char rstat = info->port[REG_STATUS]; + unsigned char rstat = info->ioport[REG_STATUS]; /* error or datavail? */ if (rstat & SER_ERROR_MASK) { @@ -2096,7 +2096,7 @@ static int force_eop_if_needed(struct e100_serial *info) TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n", rstat | (info->line << 8))); /* Read data to clear status flags */ - (void)info->port[REG_DATA]; + (void)info->ioport[REG_DATA]; info->forced_eop = 0; START_FLUSH_FAST_TIMER(info, "magic"); @@ -2296,7 +2296,7 @@ struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info) } /* Read data and status at the same time */ - data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]); + data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); more_data: if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) { DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); @@ -2391,7 +2391,7 @@ more_data: info->icount.rx++; - data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]); + data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { DEBUG_LOG(info->line, "ser_rx %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read)); goto more_data; @@ -2413,7 +2413,7 @@ static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) return handle_ser_rx_interrupt_no_dma(info); } /* DMA is used */ - rstat = info->port[REG_STATUS]; + rstat = info->ioport[REG_STATUS]; if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); } @@ -2426,7 +2426,7 @@ static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) /* If we got an error, we must reset it by reading the * data_in field */ - data = info->port[REG_DATA]; + data = info->ioport[REG_DATA]; DINTR1(DEBUG_LOG(info->line, "ser_rx! %c\n", data)); DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat)); if (!data && (rstat & SER_FRAMING_ERR_MASK)) { @@ -2528,10 +2528,10 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) unsigned char rstat; DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char)); local_irq_save(flags); - rstat = info->port[REG_STATUS]; + rstat = info->ioport[REG_STATUS]; DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); - info->port[REG_TR_DATA] = info->x_char; + info->ioport[REG_TR_DATA] = info->x_char; info->icount.tx++; info->x_char = 0; /* We must enable since it is disabled in ser_interrupt */ @@ -2545,7 +2545,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) /* We only use normal tx interrupt when sending x_char */ DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0)); local_irq_save(flags); - rstat = info->port[REG_STATUS]; + rstat = info->ioport[REG_STATUS]; DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); e100_disable_serial_tx_ready_irq(info); if (info->port.tty->stopped) @@ -2573,7 +2573,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail])); /* Send a byte, rs485 timing is critical so turn of ints */ local_irq_save(flags); - info->port[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; + info->ioport[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1); info->icount.tx++; if (info->xmit.head == info->xmit.tail) { @@ -2848,7 +2848,7 @@ startup(struct e100_serial * info) /* dummy read to reset any serial errors */ - (void)info->port[REG_DATA]; + (void)info->ioport[REG_DATA]; /* enable the interrupts */ if (info->uses_dma_out) @@ -2897,7 +2897,7 @@ shutdown(struct e100_serial * info) /* shut down the transmitter and receiver */ DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line)); e100_disable_rx(info); - info->port[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40); + info->ioport[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40); /* disable interrupts, reset dma channels */ if (info->uses_dma_in) { @@ -2968,7 +2968,7 @@ change_speed(struct e100_serial *info) if (!info->port.tty || !info->port.tty->termios) return; - if (!info->port) + if (!info->ioport) return; cflag = info->port.tty->termios->c_cflag; @@ -3037,7 +3037,7 @@ change_speed(struct e100_serial *info) info->baud = cflag_to_baud(cflag); #ifndef CONFIG_SVINTO_SIM - info->port[REG_BAUD] = cflag_to_etrax_baud(cflag); + info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag); #endif /* CONFIG_SVINTO_SIM */ } @@ -3097,8 +3097,8 @@ change_speed(struct e100_serial *info) /* actually write the control regs to the hardware */ - info->port[REG_TR_CTRL] = info->tx_ctrl; - info->port[REG_REC_CTRL] = info->rx_ctrl; + info->ioport[REG_TR_CTRL] = info->tx_ctrl; + info->ioport[REG_REC_CTRL] = info->rx_ctrl; xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty)); xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); if (info->port.tty->termios->c_iflag & IXON ) { @@ -3107,7 +3107,7 @@ change_speed(struct e100_serial *info) xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); } - *((unsigned long *)&info->port[REG_XOFF]) = xoff; + *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; local_irq_restore(flags); #endif /* !CONFIG_SVINTO_SIM */ @@ -3156,7 +3156,7 @@ static int rs_raw_write(struct tty_struct *tty, #ifdef SERIAL_DEBUG_DATA if (info->line == SERIAL_DEBUG_LINE) printk("rs_raw_write (%d), status %d\n", - count, info->port[REG_STATUS]); + count, info->ioport[REG_STATUS]); #endif #ifdef CONFIG_SVINTO_SIM @@ -3427,7 +3427,7 @@ get_serial_info(struct e100_serial * info, memset(&tmp, 0, sizeof(tmp)); tmp.type = info->type; tmp.line = info->line; - tmp.port = (int)info->port; + tmp.port = (int)info->ioport; tmp.irq = info->irq; tmp.flags = info->flags; tmp.baud_base = info->baud_base; @@ -3557,14 +3557,14 @@ char *get_control_state_str(int MLines, char *s) } #endif -static void +static int rs_break(struct tty_struct *tty, int break_state) { struct e100_serial *info = (struct e100_serial *)tty->driver_data; unsigned long flags; - if (!info->port) - return; + if (!info->ioport) + return -EIO; local_irq_save(flags); if (break_state == -1) { @@ -3575,8 +3575,9 @@ rs_break(struct tty_struct *tty, int break_state) /* Set bit 7 (txd) and 6 (tr_enable) */ info->tx_ctrl |= (0x80 | 0x40); } - info->port[REG_TR_CTRL] = info->tx_ctrl; + info->ioport[REG_TR_CTRL] = info->tx_ctrl; local_irq_restore(flags); + return 0; } static int @@ -4231,9 +4232,9 @@ static int line_info(char *buf, struct e100_serial *info) unsigned long tmp; ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d", - info->line, (unsigned long)info->port, info->irq); + info->line, (unsigned long)info->ioport, info->irq); - if (!info->port || (info->type == PORT_UNKNOWN)) { + if (!info->ioport || (info->type == PORT_UNKNOWN)) { ret += sprintf(buf+ret, "\n"); return ret; } @@ -4281,7 +4282,7 @@ static int line_info(char *buf, struct e100_serial *info) } { - unsigned char rstat = info->port[REG_STATUS]; + unsigned char rstat = info->ioport[REG_STATUS]; if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) ret += sprintf(buf+ret, " xoff_detect:1"); } @@ -4502,7 +4503,7 @@ rs_init(void) if (info->enabled) { printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n", - serial_driver->name, info->line, (unsigned int)info->port); + serial_driver->name, info->line, (unsigned int)info->ioport); } } #ifdef CONFIG_ETRAX_FAST_TIMER diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h index ccd0f32b7372..e3c5c8c3c09b 100644 --- a/drivers/serial/crisv10.h +++ b/drivers/serial/crisv10.h @@ -36,8 +36,9 @@ struct etrax_recv_buffer { }; struct e100_serial { + struct tty_port port; int baud; - volatile u8 *port; /* R_SERIALx_CTRL */ + volatile u8 *ioport; /* R_SERIALx_CTRL */ u32 irq; /* bitnr in R_IRQ_MASK2 for dmaX_descr */ /* Output registers */ -- cgit v1.2.3 From d5cae364148088911bdf007a8aaefb46a92f16f7 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:47:07 +0100 Subject: vt: Deadlock workaround 2.6.26 corrected the mutex locking on tty resizing to fix the case where you could get the tty/vt sizing out of sync. That turns out to have a deadlock. The actual fix is really major and I've got it lined up as part of the ops changes for 2.6.28 so for 2.6.26/2.6.27 it is safer to reintroduce this ages old minor bug. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/vt.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 82a51f38a546..1bc00c9d860d 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -916,7 +916,6 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines) ws.ws_col = vc->vc_cols; ws.ws_ypixel = vc->vc_scan_lines; - mutex_lock(&vc->vc_tty->termios_mutex); spin_lock_irq(&vc->vc_tty->ctrl_lock); if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col)) pgrp = get_pid(vc->vc_tty->pgrp); @@ -926,7 +925,6 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines) put_pid(pgrp); } *cws = ws; - mutex_unlock(&vc->vc_tty->termios_mutex); } if (CON_IS_VISIBLE(vc)) -- cgit v1.2.3 From 670d59c0ae31a872341785b1d93add284c1653ff Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:53:22 +0100 Subject: ar7_wdt watchdog driver: Fix locking Use unlocked_ioctl Remove semaphores Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/watchdog/ar7_wdt.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c index 2eb48c0df32c..ef7b0d67095e 100644 --- a/drivers/watchdog/ar7_wdt.c +++ b/drivers/watchdog/ar7_wdt.c @@ -69,7 +69,8 @@ struct ar7_wdt { u32 prescale; }; -static struct semaphore open_semaphore; +static unsigned long wdt_is_open; +static spinlock_t wdt_lock; static unsigned expect_close; /* XXX currently fixed, allows max margin ~68.72 secs */ @@ -154,8 +155,10 @@ static void ar7_wdt_update_margin(int new_margin) u32 change; change = new_margin * (ar7_vbus_freq() / prescale_value); - if (change < 1) change = 1; - if (change > 0xffff) change = 0xffff; + if (change < 1) + change = 1; + if (change > 0xffff) + change = 0xffff; ar7_wdt_change(change); margin = change * prescale_value / ar7_vbus_freq(); printk(KERN_INFO DRVNAME @@ -179,7 +182,7 @@ static void ar7_wdt_disable_wdt(void) static int ar7_wdt_open(struct inode *inode, struct file *file) { /* only allow one at a time */ - if (down_trylock(&open_semaphore)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; ar7_wdt_enable_wdt(); expect_close = 0; @@ -195,9 +198,7 @@ static int ar7_wdt_release(struct inode *inode, struct file *file) "will not disable the watchdog timer\n"); else if (!nowayout) ar7_wdt_disable_wdt(); - - up(&open_semaphore); - + clear_bit(0, &wdt_is_open); return 0; } @@ -222,7 +223,9 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data, if (len) { size_t i; + spin_lock(&wdt_lock); ar7_wdt_kick(1); + spin_unlock(&wdt_lock); expect_close = 0; for (i = 0; i < len; ++i) { @@ -237,8 +240,8 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data, return len; } -static int ar7_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ar7_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { static struct watchdog_info ident = { .identity = LONGNAME, @@ -269,8 +272,10 @@ static int ar7_wdt_ioctl(struct inode *inode, struct file *file, if (new_margin < 1) return -EINVAL; + spin_lock(&wdt_lock); ar7_wdt_update_margin(new_margin); ar7_wdt_kick(1); + spin_unlock(&wdt_lock); case WDIOC_GETTIMEOUT: if (put_user(margin, (int *)arg)) @@ -282,7 +287,7 @@ static int ar7_wdt_ioctl(struct inode *inode, struct file *file, static const struct file_operations ar7_wdt_fops = { .owner = THIS_MODULE, .write = ar7_wdt_write, - .ioctl = ar7_wdt_ioctl, + .unlocked_ioctl = ar7_wdt_ioctl, .open = ar7_wdt_open, .release = ar7_wdt_release, }; @@ -297,6 +302,8 @@ static int __init ar7_wdt_init(void) { int rc; + spin_lock_init(&wdt_lock); + ar7_wdt_get_regs(); if (!request_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt), @@ -312,8 +319,6 @@ static int __init ar7_wdt_init(void) ar7_wdt_prescale(prescale_value); ar7_wdt_update_margin(margin); - sema_init(&open_semaphore, 1); - rc = register_reboot_notifier(&ar7_wdt_notifier); if (rc) { printk(KERN_ERR DRVNAME -- cgit v1.2.3 From d6547378df1c11bc6790b87abedb3526ded40ef9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:54:01 +0100 Subject: it8712f_wdt: Locking and coding style Signed-off-by: Andrew Morton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/watchdog/it8712f_wdt.c | 77 +++++++++++++++--------------------------- 1 file changed, 27 insertions(+), 50 deletions(-) diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c index 445b7e812112..51bfd5721833 100644 --- a/drivers/watchdog/it8712f_wdt.c +++ b/drivers/watchdog/it8712f_wdt.c @@ -30,9 +30,8 @@ #include #include #include - -#include -#include +#include +#include #define NAME "it8712f_wdt" @@ -50,7 +49,7 @@ static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); -static struct semaphore it8712f_wdt_sem; +static unsigned long wdt_open; static unsigned expect_close; static spinlock_t io_lock; static unsigned char revision; @@ -86,22 +85,19 @@ static unsigned short address; #define WDT_OUT_PWROK 0x10 #define WDT_OUT_KRST 0x40 -static int -superio_inb(int reg) +static int superio_inb(int reg) { outb(reg, REG); return inb(VAL); } -static void -superio_outb(int val, int reg) +static void superio_outb(int val, int reg) { outb(reg, REG); outb(val, VAL); } -static int -superio_inw(int reg) +static int superio_inw(int reg) { int val; outb(reg++, REG); @@ -111,15 +107,13 @@ superio_inw(int reg) return val; } -static inline void -superio_select(int ldn) +static inline void superio_select(int ldn) { outb(LDN, REG); outb(ldn, VAL); } -static inline void -superio_enter(void) +static inline void superio_enter(void) { spin_lock(&io_lock); outb(0x87, REG); @@ -128,22 +122,19 @@ superio_enter(void) outb(0x55, REG); } -static inline void -superio_exit(void) +static inline void superio_exit(void) { outb(0x02, REG); outb(0x02, VAL); spin_unlock(&io_lock); } -static inline void -it8712f_wdt_ping(void) +static inline void it8712f_wdt_ping(void) { inb(address); } -static void -it8712f_wdt_update_margin(void) +static void it8712f_wdt_update_margin(void) { int config = WDT_OUT_KRST | WDT_OUT_PWROK; int units = margin; @@ -165,8 +156,7 @@ it8712f_wdt_update_margin(void) superio_outb(units, WDT_TIMEOUT); } -static int -it8712f_wdt_get_status(void) +static int it8712f_wdt_get_status(void) { if (superio_inb(WDT_CONTROL) & 0x01) return WDIOF_CARDRESET; @@ -174,8 +164,7 @@ it8712f_wdt_get_status(void) return 0; } -static void -it8712f_wdt_enable(void) +static void it8712f_wdt_enable(void) { printk(KERN_DEBUG NAME ": enabling watchdog timer\n"); superio_enter(); @@ -190,8 +179,7 @@ it8712f_wdt_enable(void) it8712f_wdt_ping(); } -static void -it8712f_wdt_disable(void) +static void it8712f_wdt_disable(void) { printk(KERN_DEBUG NAME ": disabling watchdog timer\n"); @@ -207,8 +195,7 @@ it8712f_wdt_disable(void) superio_exit(); } -static int -it8712f_wdt_notify(struct notifier_block *this, +static int it8712f_wdt_notify(struct notifier_block *this, unsigned long code, void *unused) { if (code == SYS_HALT || code == SYS_POWER_OFF) @@ -222,9 +209,8 @@ static struct notifier_block it8712f_wdt_notifier = { .notifier_call = it8712f_wdt_notify, }; -static ssize_t -it8712f_wdt_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) +static ssize_t it8712f_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { /* check for a magic close character */ if (len) { @@ -245,9 +231,8 @@ it8712f_wdt_write(struct file *file, const char __user *data, return len; } -static int -it8712f_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -302,19 +287,16 @@ it8712f_wdt_ioctl(struct inode *inode, struct file *file, } } -static int -it8712f_wdt_open(struct inode *inode, struct file *file) +static int it8712f_wdt_open(struct inode *inode, struct file *file) { /* only allow one at a time */ - if (down_trylock(&it8712f_wdt_sem)) + if (test_and_set_bit(0, &wdt_open)) return -EBUSY; it8712f_wdt_enable(); - return nonseekable_open(inode, file); } -static int -it8712f_wdt_release(struct inode *inode, struct file *file) +static int it8712f_wdt_release(struct inode *inode, struct file *file) { if (expect_close != 42) { printk(KERN_WARNING NAME @@ -324,7 +306,7 @@ it8712f_wdt_release(struct inode *inode, struct file *file) it8712f_wdt_disable(); } expect_close = 0; - up(&it8712f_wdt_sem); + clear_bit(0, &wdt_open); return 0; } @@ -333,7 +315,7 @@ static const struct file_operations it8712f_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = it8712f_wdt_write, - .ioctl = it8712f_wdt_ioctl, + .unlocked_ioctl = it8712f_wdt_ioctl, .open = it8712f_wdt_open, .release = it8712f_wdt_release, }; @@ -344,8 +326,7 @@ static struct miscdevice it8712f_wdt_miscdev = { .fops = &it8712f_wdt_fops, }; -static int __init -it8712f_wdt_find(unsigned short *address) +static int __init it8712f_wdt_find(unsigned short *address) { int err = -ENODEV; int chip_type; @@ -387,8 +368,7 @@ exit: return err; } -static int __init -it8712f_wdt_init(void) +static int __init it8712f_wdt_init(void) { int err = 0; @@ -404,8 +384,6 @@ it8712f_wdt_init(void) it8712f_wdt_disable(); - sema_init(&it8712f_wdt_sem, 1); - err = register_reboot_notifier(&it8712f_wdt_notifier); if (err) { printk(KERN_ERR NAME ": unable to register reboot notifier\n"); @@ -430,8 +408,7 @@ out: return err; } -static void __exit -it8712f_wdt_exit(void) +static void __exit it8712f_wdt_exit(void) { misc_deregister(&it8712f_wdt_miscdev); unregister_reboot_notifier(&it8712f_wdt_notifier); -- cgit v1.2.3 From 41dc8b72e37c514f7332cbc3f3dd864910c2a1fa Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:54:46 +0100 Subject: s3c2410_wdt watchdog driver: Locking and coding style Kill off use of semaphores. Fix ioctl races and locking holes. From: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/watchdog/s3c2410_wdt.c | 148 ++++++++++++++++++++++------------------- 1 file changed, 80 insertions(+), 68 deletions(-) diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 98532c0e0689..97b4a2e8eb09 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -46,9 +46,8 @@ #include #include #include - -#include -#include +#include +#include #include @@ -65,8 +64,8 @@ static int nowayout = WATCHDOG_NOWAYOUT; static int tmr_margin = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME; static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT; -static int soft_noboot = 0; -static int debug = 0; +static int soft_noboot; +static int debug; module_param(tmr_margin, int, 0); module_param(tmr_atboot, int, 0); @@ -74,24 +73,23 @@ module_param(nowayout, int, 0); module_param(soft_noboot, int, 0); module_param(debug, int, 0); -MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")"); - -MODULE_PARM_DESC(tmr_atboot, "Watchdog is started at boot time if set to 1, default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT)); - -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); - +MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default=" + __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")"); +MODULE_PARM_DESC(tmr_atboot, + "Watchdog is started at boot time if set to 1, default=" + __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT)); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default depends on ONLY_TESTING)"); - MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug, (default 0)"); typedef enum close_state { CLOSE_STATE_NOT, - CLOSE_STATE_ALLOW=0x4021 + CLOSE_STATE_ALLOW = 0x4021 } close_state_t; -static DECLARE_MUTEX(open_lock); - +static unsigned long open_lock; static struct device *wdt_dev; /* platform device attached to */ static struct resource *wdt_mem; static struct resource *wdt_irq; @@ -99,38 +97,58 @@ static struct clk *wdt_clock; static void __iomem *wdt_base; static unsigned int wdt_count; static close_state_t allow_close; +static DEFINE_SPINLOCK(wdt_lock); /* watchdog control routines */ #define DBG(msg...) do { \ if (debug) \ printk(KERN_INFO msg); \ - } while(0) + } while (0) /* functions */ -static int s3c2410wdt_keepalive(void) +static void s3c2410wdt_keepalive(void) { + spin_lock(&wdt_lock); writel(wdt_count, wdt_base + S3C2410_WTCNT); - return 0; + spin_unlock(&wdt_lock); } -static int s3c2410wdt_stop(void) +static void __s3c2410wdt_stop(void) { unsigned long wtcon; + spin_lock(&wdt_lock); wtcon = readl(wdt_base + S3C2410_WTCON); wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN); writel(wtcon, wdt_base + S3C2410_WTCON); + spin_unlock(&wdt_lock); +} - return 0; +static void __s3c2410wdt_stop(void) +{ + unsigned long wtcon; + + wtcon = readl(wdt_base + S3C2410_WTCON); + wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN); + writel(wtcon, wdt_base + S3C2410_WTCON); +} + +static void s3c2410wdt_stop(void) +{ + spin_lock(&wdt_lock); + __s3c2410wdt_stop(); + spin_unlock(&wdt_lock); } -static int s3c2410wdt_start(void) +static void s3c2410wdt_start(void) { unsigned long wtcon; - s3c2410wdt_stop(); + spin_lock(&wdt_lock); + + __s3c2410wdt_stop(); wtcon = readl(wdt_base + S3C2410_WTCON); wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128; @@ -149,6 +167,7 @@ static int s3c2410wdt_start(void) writel(wdt_count, wdt_base + S3C2410_WTDAT); writel(wdt_count, wdt_base + S3C2410_WTCNT); writel(wtcon, wdt_base + S3C2410_WTCON); + spin_unlock(&wdt_lock); return 0; } @@ -211,7 +230,7 @@ static int s3c2410wdt_set_heartbeat(int timeout) static int s3c2410wdt_open(struct inode *inode, struct file *file) { - if(down_trylock(&open_lock)) + if (test_and_set_bit(0, &open_lock)) return -EBUSY; if (nowayout) @@ -231,15 +250,14 @@ static int s3c2410wdt_release(struct inode *inode, struct file *file) * Lock it in if it's a module and we set nowayout */ - if (allow_close == CLOSE_STATE_ALLOW) { + if (allow_close == CLOSE_STATE_ALLOW) s3c2410wdt_stop(); - } else { + else { dev_err(wdt_dev, "Unexpected close, not stopping watchdog\n"); s3c2410wdt_keepalive(); } - allow_close = CLOSE_STATE_NOT; - up(&open_lock); + clear_bit(0, &open_lock); return 0; } @@ -249,7 +267,7 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data, /* * Refresh the timer. */ - if(len) { + if (len) { if (!nowayout) { size_t i; @@ -265,7 +283,6 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data, allow_close = CLOSE_STATE_ALLOW; } } - s3c2410wdt_keepalive(); } return len; @@ -273,48 +290,41 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data, #define OPTIONS WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE -static struct watchdog_info s3c2410_wdt_ident = { +static const struct watchdog_info s3c2410_wdt_ident = { .options = OPTIONS, .firmware_version = 0, .identity = "S3C2410 Watchdog", }; -static int s3c2410wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long s3c2410wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; int new_margin; switch (cmd) { - default: - return -ENOTTY; - - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &s3c2410_wdt_ident, - sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_KEEPALIVE: - s3c2410wdt_keepalive(); - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_margin, p)) - return -EFAULT; - - if (s3c2410wdt_set_heartbeat(new_margin)) - return -EINVAL; - - s3c2410wdt_keepalive(); - return put_user(tmr_margin, p); - - case WDIOC_GETTIMEOUT: - return put_user(tmr_margin, p); + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &s3c2410_wdt_ident, + sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + s3c2410wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_margin, p)) + return -EFAULT; + if (s3c2410wdt_set_heartbeat(new_margin)) + return -EINVAL; + s3c2410wdt_keepalive(); + return put_user(tmr_margin, p); + case WDIOC_GETTIMEOUT: + return put_user(tmr_margin, p); } } @@ -324,7 +334,7 @@ static const struct file_operations s3c2410wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = s3c2410wdt_write, - .ioctl = s3c2410wdt_ioctl, + .unlocked_ioctl = s3c2410wdt_ioctl, .open = s3c2410wdt_open, .release = s3c2410wdt_release, }; @@ -411,14 +421,15 @@ static int s3c2410wdt_probe(struct platform_device *pdev) * not, try the default value */ if (s3c2410wdt_set_heartbeat(tmr_margin)) { - started = s3c2410wdt_set_heartbeat(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); + started = s3c2410wdt_set_heartbeat( + CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); - if (started == 0) { - dev_info(dev,"tmr_margin value out of range, default %d used\n", + if (started == 0) + dev_info(dev, + "tmr_margin value out of range, default %d used\n", CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); - } else { + else dev_info(dev, "default timer value is out of range, cannot start\n"); - } } ret = misc_register(&s3c2410wdt_miscdev); @@ -447,7 +458,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) (wtcon & S3C2410_WTCON_ENABLE) ? "" : "in", (wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis", (wtcon & S3C2410_WTCON_INTEN) ? "" : "en"); - + return 0; err_clk: @@ -487,7 +498,7 @@ static int s3c2410wdt_remove(struct platform_device *dev) static void s3c2410wdt_shutdown(struct platform_device *dev) { - s3c2410wdt_stop(); + s3c2410wdt_stop(); } #ifdef CONFIG_PM @@ -540,7 +551,8 @@ static struct platform_driver s3c2410wdt_driver = { }; -static char banner[] __initdata = KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n"; +static char banner[] __initdata = + KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n"; static int __init watchdog_init(void) { -- cgit v1.2.3 From 9f2d1f0da766f84fdb96c9bd79ed0f97036635cb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:55:35 +0100 Subject: wdt: Cleanup and sort out locking and inb_p Signed-off-by: Andrew Morton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/watchdog/wdt.c | 176 +++++++++++++------------- drivers/watchdog/wdt_pci.c | 300 ++++++++++++++++++++++++++------------------- 2 files changed, 265 insertions(+), 211 deletions(-) diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c index 756fb15fdce7..53a6b18bcb9a 100644 --- a/drivers/watchdog/wdt.c +++ b/drivers/watchdog/wdt.c @@ -24,9 +24,10 @@ * Matt Crocker). * Alan Cox : Added wdt= boot option * Alan Cox : Cleaned up copy/user stuff - * Tim Hockin : Added insmod parameters, comment cleanup - * Parameterized timeout - * Tigran Aivazian : Restructured wdt_init() to handle failures + * Tim Hockin : Added insmod parameters, comment + * cleanup, parameterized timeout + * Tigran Aivazian : Restructured wdt_init() to handle + * failures * Joel Becker : Added WDIOC_GET/SETTIMEOUT * Matt Domsch : Added nowayout module option */ @@ -42,9 +43,9 @@ #include #include #include +#include +#include -#include -#include #include #include "wd501p.h" @@ -60,15 +61,19 @@ static char expect_close; static int heartbeat = WD_TIMO; static int wd_heartbeat; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0 65535)) + if (t < 1 || t > 65535) return -EINVAL; heartbeat = t; @@ -200,7 +211,7 @@ static int wdt_get_status(int *status) new_status = inb_p(WDT_SR); spin_unlock_irqrestore(&wdt_lock, flags); - *status=0; + *status = 0; if (new_status & WDC_SR_ISOI0) *status |= WDIOF_EXTERN1; if (new_status & WDC_SR_ISII1) @@ -266,7 +277,7 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id) #ifdef CONFIG_WDT_501 if (!(status & WDC_SR_TGOOD)) - printk(KERN_CRIT "Overheat alarm.(%d)\n",inb_p(WDT_RT)); + printk(KERN_CRIT "Overheat alarm.(%d)\n", inb_p(WDT_RT)); if (!(status & WDC_SR_PSUOVER)) printk(KERN_CRIT "PSU over voltage.\n"); if (!(status & WDC_SR_PSUUNDR)) @@ -304,9 +315,10 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id) * write of data will do, as we we don't define content meaning. */ -static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { - if(count) { + if (count) { if (!nowayout) { size_t i; @@ -328,7 +340,6 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count /** * wdt_ioctl: - * @inode: inode of the device * @file: file handle to the device * @cmd: watchdog command * @arg: argument pointer @@ -338,8 +349,7 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count * querying capabilities and current status. */ -static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -362,32 +372,28 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, ident.options |= WDIOF_FANFAULT; #endif /* CONFIG_WDT_501 */ - switch(cmd) - { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - - case WDIOC_GETSTATUS: - wdt_get_status(&status); - return put_user(status, p); - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_ping(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_heartbeat, p)) - return -EFAULT; - - if (wdt_set_heartbeat(new_heartbeat)) - return -EINVAL; - - wdt_ping(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, p); + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + wdt_get_status(&status); + return put_user(status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdt_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, p)) + return -EFAULT; + if (wdt_set_heartbeat(new_heartbeat)) + return -EINVAL; + wdt_ping(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); } } @@ -405,7 +411,7 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, static int wdt_open(struct inode *inode, struct file *file) { - if(test_and_set_bit(0, &wdt_is_open)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; /* * Activate @@ -432,7 +438,8 @@ static int wdt_release(struct inode *inode, struct file *file) wdt_stop(); clear_bit(0, &wdt_is_open); } else { - printk(KERN_CRIT "wdt: WDT device closed unexpectedly. WDT will not stop!\n"); + printk(KERN_CRIT + "wdt: WDT device closed unexpectedly. WDT will not stop!\n"); wdt_ping(); } expect_close = 0; @@ -451,14 +458,15 @@ static int wdt_release(struct inode *inode, struct file *file) * farenheit. It was designed by an imperial measurement luddite. */ -static ssize_t wdt_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ptr) +static ssize_t wdt_temp_read(struct file *file, char __user *buf, + size_t count, loff_t *ptr) { int temperature; if (wdt_get_temperature(&temperature)) return -EFAULT; - if (copy_to_user (buf, &temperature, 1)) + if (copy_to_user(buf, &temperature, 1)) return -EFAULT; return 1; @@ -506,10 +514,8 @@ static int wdt_temp_release(struct inode *inode, struct file *file) static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if(code==SYS_DOWN || code==SYS_HALT) { - /* Turn the card off */ + if (code == SYS_DOWN || code == SYS_HALT) wdt_stop(); - } return NOTIFY_DONE; } @@ -522,7 +528,7 @@ static const struct file_operations wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdt_write, - .ioctl = wdt_ioctl, + .unlocked_ioctl = wdt_ioctl, .open = wdt_open, .release = wdt_release, }; @@ -576,7 +582,7 @@ static void __exit wdt_exit(void) #endif /* CONFIG_WDT_501 */ unregister_reboot_notifier(&wdt_notifier); free_irq(irq, NULL); - release_region(io,8); + release_region(io, 8); } /** @@ -591,44 +597,49 @@ static int __init wdt_init(void) { int ret; - /* Check that the heartbeat value is within it's range ; if not reset to the default */ + /* Check that the heartbeat value is within it's range; + if not reset to the default */ if (wdt_set_heartbeat(heartbeat)) { wdt_set_heartbeat(WD_TIMO); - printk(KERN_INFO "wdt: heartbeat value must be 0 #include #include +#include +#include -#include -#include #include #define WDT_IS_PCI @@ -73,7 +75,7 @@ /* We can only use 1 card due to the /dev/watchdog restriction */ static int dev_count; -static struct semaphore open_sem; +static unsigned long open_lock; static DEFINE_SPINLOCK(wdtpci_lock); static char expect_close; @@ -86,18 +88,23 @@ static int irq; static int heartbeat = WD_TIMO; static int wd_heartbeat; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0>8, WDT_COUNT0+ctr); + outb(val & 0xFF, WDT_COUNT0 + ctr); + udelay(8); + outb(val >> 8, WDT_COUNT0 + ctr); + udelay(8); } /** @@ -134,23 +144,35 @@ static int wdtpci_start(void) * "pet" the watchdog, as Access says. * This resets the clock outputs. */ - inb_p(WDT_DC); /* Disable watchdog */ - wdtpci_ctr_mode(2,0); /* Program CTR2 for Mode 0: Pulse on Terminal Count */ - outb_p(0, WDT_DC); /* Enable watchdog */ - - inb_p(WDT_DC); /* Disable watchdog */ - outb_p(0, WDT_CLOCK); /* 2.0833MHz clock */ - inb_p(WDT_BUZZER); /* disable */ - inb_p(WDT_OPTONOTRST); /* disable */ - inb_p(WDT_OPTORST); /* disable */ - inb_p(WDT_PROGOUT); /* disable */ - wdtpci_ctr_mode(0,3); /* Program CTR0 for Mode 3: Square Wave Generator */ - wdtpci_ctr_mode(1,2); /* Program CTR1 for Mode 2: Rate Generator */ - wdtpci_ctr_mode(2,1); /* Program CTR2 for Mode 1: Retriggerable One-Shot */ - wdtpci_ctr_load(0,20833); /* count at 100Hz */ - wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_mode(2, 0); /* Program CTR2 for Mode 0: + Pulse on Terminal Count */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + outb(0, WDT_CLOCK); /* 2.0833MHz clock */ + udelay(8); + inb(WDT_BUZZER); /* disable */ + udelay(8); + inb(WDT_OPTONOTRST); /* disable */ + udelay(8); + inb(WDT_OPTORST); /* disable */ + udelay(8); + inb(WDT_PROGOUT); /* disable */ + udelay(8); + wdtpci_ctr_mode(0, 3); /* Program CTR0 for Mode 3: + Square Wave Generator */ + wdtpci_ctr_mode(1, 2); /* Program CTR1 for Mode 2: + Rate Generator */ + wdtpci_ctr_mode(2, 1); /* Program CTR2 for Mode 1: + Retriggerable One-Shot */ + wdtpci_ctr_load(0, 20833); /* count at 100Hz */ + wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */ /* DO NOT LOAD CTR2 on PCI card! -- JPN */ - outb_p(0, WDT_DC); /* Enable watchdog */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); spin_unlock_irqrestore(&wdtpci_lock, flags); return 0; @@ -162,14 +184,15 @@ static int wdtpci_start(void) * Stop the watchdog driver. */ -static int wdtpci_stop (void) +static int wdtpci_stop(void) { unsigned long flags; /* Turn the card off */ spin_lock_irqsave(&wdtpci_lock, flags); - inb_p(WDT_DC); /* Disable watchdog */ - wdtpci_ctr_load(2,0); /* 0 length reset pulses now */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_load(2, 0); /* 0 length reset pulses now */ spin_unlock_irqrestore(&wdtpci_lock, flags); return 0; } @@ -177,20 +200,23 @@ static int wdtpci_stop (void) /** * wdtpci_ping: * - * Reload counter one with the watchdog heartbeat. We don't bother reloading - * the cascade counter. + * Reload counter one with the watchdog heartbeat. We don't bother + * reloading the cascade counter. */ static int wdtpci_ping(void) { unsigned long flags; - /* Write a watchdog value */ spin_lock_irqsave(&wdtpci_lock, flags); - inb_p(WDT_DC); /* Disable watchdog */ - wdtpci_ctr_mode(1,2); /* Re-Program CTR1 for Mode 2: Rate Generator */ - wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */ - outb_p(0, WDT_DC); /* Enable watchdog */ + /* Write a watchdog value */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_mode(1, 2); /* Re-Program CTR1 for Mode 2: + Rate Generator */ + wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); spin_unlock_irqrestore(&wdtpci_lock, flags); return 0; } @@ -199,14 +225,14 @@ static int wdtpci_ping(void) * wdtpci_set_heartbeat: * @t: the new heartbeat value that needs to be set. * - * Set a new heartbeat value for the watchdog device. If the heartbeat value is - * incorrect we keep the old value and return -EINVAL. If successfull we - * return 0. + * Set a new heartbeat value for the watchdog device. If the heartbeat + * value is incorrect we keep the old value and return -EINVAL. + * If successful we return 0. */ static int wdtpci_set_heartbeat(int t) { /* Arbitrary, can't find the card's limits */ - if ((t < 1) || (t > 65535)) + if (t < 1 || t > 65535) return -EINVAL; heartbeat = t; @@ -227,9 +253,14 @@ static int wdtpci_set_heartbeat(int t) static int wdtpci_get_status(int *status) { - unsigned char new_status=inb_p(WDT_SR); + unsigned char new_status; + unsigned long flags; + + spin_lock_irqsave(&wdtpci_lock, flags); + new_status = inb(WDT_SR); + spin_unlock_irqrestore(&wdtpci_lock, flags); - *status=0; + *status = 0; if (new_status & WDC_SR_ISOI0) *status |= WDIOF_EXTERN1; if (new_status & WDC_SR_ISII1) @@ -259,8 +290,12 @@ static int wdtpci_get_status(int *status) static int wdtpci_get_temperature(int *temperature) { - unsigned short c=inb_p(WDT_RT); - + unsigned short c; + unsigned long flags; + spin_lock_irqsave(&wdtpci_lock, flags); + c = inb(WDT_RT); + udelay(8); + spin_unlock_irqrestore(&wdtpci_lock, flags); *temperature = (c * 11 / 15) + 7; return 0; } @@ -282,17 +317,25 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) * Read the status register see what is up and * then printk it. */ - unsigned char status=inb_p(WDT_SR); + unsigned char status; + + spin_lock(&wdtpci_lock); + + status = inb(WDT_SR); + udelay(8); printk(KERN_CRIT PFX "status %d\n", status); #ifdef CONFIG_WDT_501_PCI - if (!(status & WDC_SR_TGOOD)) - printk(KERN_CRIT PFX "Overheat alarm.(%d)\n",inb_p(WDT_RT)); + if (!(status & WDC_SR_TGOOD)) { + u8 alarm = inb(WDT_RT); + printk(KERN_CRIT PFX "Overheat alarm.(%d)\n", alarm); + udelay(8); + } if (!(status & WDC_SR_PSUOVER)) - printk(KERN_CRIT PFX "PSU over voltage.\n"); + printk(KERN_CRIT PFX "PSU over voltage.\n"); if (!(status & WDC_SR_PSUUNDR)) - printk(KERN_CRIT PFX "PSU under voltage.\n"); + printk(KERN_CRIT PFX "PSU under voltage.\n"); if (tachometer) { if (!(status & WDC_SR_FANGOOD)) printk(KERN_CRIT PFX "Possible fan fault.\n"); @@ -310,6 +353,7 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) printk(KERN_CRIT PFX "Reset in 5ms.\n"); #endif } + spin_unlock(&wdtpci_lock); return IRQ_HANDLED; } @@ -325,7 +369,8 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) * write of data will do, as we we don't define content meaning. */ -static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t wdtpci_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { if (count) { if (!nowayout) { @@ -335,7 +380,7 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co for (i = 0; i != count; i++) { char c; - if(get_user(c, buf+i)) + if (get_user(c, buf+i)) return -EFAULT; if (c == 'V') expect_close = 42; @@ -343,13 +388,11 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co } wdtpci_ping(); } - return count; } /** * wdtpci_ioctl: - * @inode: inode of the device * @file: file handle to the device * @cmd: watchdog command * @arg: argument pointer @@ -359,8 +402,8 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co * querying capabilities and current status. */ -static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long wdtpci_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_heartbeat; int status; @@ -383,33 +426,29 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd ident.options |= WDIOF_FANFAULT; #endif /* CONFIG_WDT_501_PCI */ - switch(cmd) - { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - - case WDIOC_GETSTATUS: - wdtpci_get_status(&status); - return put_user(status, p); - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdtpci_ping(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_heartbeat, p)) - return -EFAULT; - - if (wdtpci_set_heartbeat(new_heartbeat)) - return -EINVAL; - - wdtpci_ping(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, p); - } + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + wdtpci_get_status(&status); + return put_user(status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdtpci_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, p)) + return -EFAULT; + if (wdtpci_set_heartbeat(new_heartbeat)) + return -EINVAL; + wdtpci_ping(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); + } } /** @@ -426,12 +465,11 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd static int wdtpci_open(struct inode *inode, struct file *file) { - if (down_trylock(&open_sem)) + if (test_and_set_bit(0, &open_lock)) return -EBUSY; - if (nowayout) { + if (nowayout) __module_get(THIS_MODULE); - } /* * Activate */ @@ -460,7 +498,7 @@ static int wdtpci_release(struct inode *inode, struct file *file) wdtpci_ping(); } expect_close = 0; - up(&open_sem); + clear_bit(0, &open_lock); return 0; } @@ -476,14 +514,15 @@ static int wdtpci_release(struct inode *inode, struct file *file) * fahrenheit. It was designed by an imperial measurement luddite. */ -static ssize_t wdtpci_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ptr) +static ssize_t wdtpci_temp_read(struct file *file, char __user *buf, + size_t count, loff_t *ptr) { int temperature; if (wdtpci_get_temperature(&temperature)) return -EFAULT; - if (copy_to_user (buf, &temperature, 1)) + if (copy_to_user(buf, &temperature, 1)) return -EFAULT; return 1; @@ -529,12 +568,10 @@ static int wdtpci_temp_release(struct inode *inode, struct file *file) */ static int wdtpci_notify_sys(struct notifier_block *this, unsigned long code, - void *unused) + void *unused) { - if (code==SYS_DOWN || code==SYS_HALT) { - /* Turn the card off */ + if (code == SYS_DOWN || code == SYS_HALT) wdtpci_stop(); - } return NOTIFY_DONE; } @@ -547,7 +584,7 @@ static const struct file_operations wdtpci_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdtpci_write, - .ioctl = wdtpci_ioctl, + .unlocked_ioctl = wdtpci_ioctl, .open = wdtpci_open, .release = wdtpci_release, }; @@ -584,80 +621,85 @@ static struct notifier_block wdtpci_notifier = { }; -static int __devinit wdtpci_init_one (struct pci_dev *dev, - const struct pci_device_id *ent) +static int __devinit wdtpci_init_one(struct pci_dev *dev, + const struct pci_device_id *ent) { int ret = -EIO; dev_count++; if (dev_count > 1) { - printk (KERN_ERR PFX "this driver only supports 1 device\n"); + printk(KERN_ERR PFX "This driver only supports one device\n"); return -ENODEV; } - if (pci_enable_device (dev)) { - printk (KERN_ERR PFX "Not possible to enable PCI Device\n"); + if (pci_enable_device(dev)) { + printk(KERN_ERR PFX "Not possible to enable PCI Device\n"); return -ENODEV; } - if (pci_resource_start (dev, 2) == 0x0000) { - printk (KERN_ERR PFX "No I/O-Address for card detected\n"); + if (pci_resource_start(dev, 2) == 0x0000) { + printk(KERN_ERR PFX "No I/O-Address for card detected\n"); ret = -ENODEV; goto out_pci; } - sema_init(&open_sem, 1); - irq = dev->irq; - io = pci_resource_start (dev, 2); + io = pci_resource_start(dev, 2); - if (request_region (io, 16, "wdt_pci") == NULL) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", io); + if (request_region(io, 16, "wdt_pci") == NULL) { + printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", io); goto out_pci; } - if (request_irq (irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED, + if (request_irq(irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED, "wdt_pci", &wdtpci_miscdev)) { - printk (KERN_ERR PFX "IRQ %d is not free\n", irq); + printk(KERN_ERR PFX "IRQ %d is not free\n", irq); goto out_reg; } - printk ("PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n", - io, irq); + printk(KERN_INFO + "PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n", + io, irq); - /* Check that the heartbeat value is within it's range ; if not reset to the default */ + /* Check that the heartbeat value is within its range; + if not reset to the default */ if (wdtpci_set_heartbeat(heartbeat)) { wdtpci_set_heartbeat(WD_TIMO); - printk(KERN_INFO PFX "heartbeat value must be 0 Date: Mon, 4 Aug 2008 17:56:02 +0100 Subject: alpha: Fix breakage in wdt_pci drivers/watchdog/wdt_pci.c: In function 'wdtpci_ctr_mode': drivers/watchdog/wdt_pci.c:120: error: implicit declaration of function 'udelay' {standard input}: Assembler messages: Signed-off-by: Andrew Morton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/watchdog/wdt_pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c index 078f37f80383..5d922fd6eafc 100644 --- a/drivers/watchdog/wdt_pci.c +++ b/drivers/watchdog/wdt_pci.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 103a1d5c57fac3623613b130b104f5b03367b31c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:56:28 +0100 Subject: sc1200 watchdog driver: Fix locking, sems and coding style Signed-off-by: Andrew Morton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/watchdog/sc1200wdt.c | 205 ++++++++++++++++++++++++------------------- 1 file changed, 113 insertions(+), 92 deletions(-) diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index 35cddff7020f..621ebad56d86 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -15,14 +15,18 @@ * * Changelog: * 20020220 Zwane Mwaikambo Code based on datasheet, no hardware. - * 20020221 Zwane Mwaikambo Cleanups as suggested by Jeff Garzik and Alan Cox. + * 20020221 Zwane Mwaikambo Cleanups as suggested by Jeff Garzik + * and Alan Cox. * 20020222 Zwane Mwaikambo Added probing. * 20020225 Zwane Mwaikambo Added ISAPNP support. * 20020412 Rob Radez Broke out start/stop functions - * Return proper status instead of temperature warning - * Add WDIOC_GETBOOTSTATUS and WDIOC_SETOPTIONS ioctls + * Return proper status instead of + * temperature warning + * Add WDIOC_GETBOOTSTATUS and + * WDIOC_SETOPTIONS ioctls * Fix CONFIG_WATCHDOG_NOWAYOUT - * 20020530 Joel Becker Add Matt Domsch's nowayout module option + * 20020530 Joel Becker Add Matt Domsch's nowayout module + * option * 20030116 Adam Belay Updated to the latest pnp code * */ @@ -39,9 +43,8 @@ #include #include #include - -#include -#include +#include +#include #define SC1200_MODULE_VER "build 20020303" #define SC1200_MODULE_NAME "sc1200wdt" @@ -72,7 +75,7 @@ static char banner[] __initdata = KERN_INFO PFX SC1200_MODULE_VER; static int timeout = 1; static int io = -1; static int io_len = 2; /* for non plug and play */ -static struct semaphore open_sem; +static unsigned long open_flag; static char expect_close; static DEFINE_SPINLOCK(sc1200wdt_lock); /* io port access serialisation */ @@ -81,7 +84,8 @@ static int isapnp = 1; static struct pnp_dev *wdt_dev; module_param(isapnp, int, 0); -MODULE_PARM_DESC(isapnp, "When set to 0 driver ISA PnP support will be disabled"); +MODULE_PARM_DESC(isapnp, + "When set to 0 driver ISA PnP support will be disabled"); #endif module_param(io, int, 0); @@ -91,26 +95,40 @@ MODULE_PARM_DESC(timeout, "range is 0-255 minutes, default is 1"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* Read from Data Register */ -static inline void sc1200wdt_read_data(unsigned char index, unsigned char *data) +static inline void __sc1200wdt_read_data(unsigned char index, + unsigned char *data) { - spin_lock(&sc1200wdt_lock); outb_p(index, PMIR); *data = inb(PMDR); - spin_unlock(&sc1200wdt_lock); } +static void sc1200wdt_read_data(unsigned char index, unsigned char *data) +{ + spin_lock(&sc1200wdt_lock); + __sc1200wdt_read_data(index, data); + spin_unlock(&sc1200wdt_lock); +} /* Write to Data Register */ -static inline void sc1200wdt_write_data(unsigned char index, unsigned char data) +static inline void __sc1200wdt_write_data(unsigned char index, + unsigned char data) { - spin_lock(&sc1200wdt_lock); outb_p(index, PMIR); outb(data, PMDR); +} + +static inline void sc1200wdt_write_data(unsigned char index, + unsigned char data) +{ + spin_lock(&sc1200wdt_lock); + __sc1200wdt_write_data(index, data); spin_unlock(&sc1200wdt_lock); } @@ -118,22 +136,23 @@ static inline void sc1200wdt_write_data(unsigned char index, unsigned char data) static void sc1200wdt_start(void) { unsigned char reg; + spin_lock(&sc1200wdt_lock); - sc1200wdt_read_data(WDCF, ®); + __sc1200wdt_read_data(WDCF, ®); /* assert WDO when any of the following interrupts are triggered too */ reg |= (KBC_IRQ | MSE_IRQ | UART1_IRQ | UART2_IRQ); - sc1200wdt_write_data(WDCF, reg); + __sc1200wdt_write_data(WDCF, reg); /* set the timeout and get the ball rolling */ - sc1200wdt_write_data(WDTO, timeout); -} + __sc1200wdt_write_data(WDTO, timeout); + spin_unlock(&sc1200wdt_lock); +} static void sc1200wdt_stop(void) { sc1200wdt_write_data(WDTO, 0); } - /* This returns the status of the WDO signal, inactive high. */ static inline int sc1200wdt_status(void) { @@ -144,14 +163,13 @@ static inline int sc1200wdt_status(void) * KEEPALIVEPING which is a bit of a kludge because there's nothing * else for enabled/disabled status */ - return (ret & 0x01) ? 0 : WDIOF_KEEPALIVEPING; /* bits 1 - 7 are undefined */ + return (ret & 0x01) ? 0 : WDIOF_KEEPALIVEPING; } - static int sc1200wdt_open(struct inode *inode, struct file *file) { /* allow one at a time */ - if (down_trylock(&open_sem)) + if (test_and_set_bit(0, &open_flag)) return -EBUSY; if (timeout > MAX_TIMEOUT) @@ -164,71 +182,71 @@ static int sc1200wdt_open(struct inode *inode, struct file *file) } -static int sc1200wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long sc1200wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_timeout; void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, .firmware_version = 0, .identity = "PC87307/PC97307", }; switch (cmd) { - default: - return -ENOTTY; - - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof ident)) - return -EFAULT; - return 0; - - case WDIOC_GETSTATUS: - return put_user(sc1200wdt_status(), p); - - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_KEEPALIVE: - sc1200wdt_write_data(WDTO, timeout); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof ident)) + return -EFAULT; + return 0; - /* the API states this is given in secs */ - new_timeout /= 60; - if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) - return -EINVAL; + case WDIOC_GETSTATUS: + return put_user(sc1200wdt_status(), p); - timeout = new_timeout; - sc1200wdt_write_data(WDTO, timeout); - /* fall through and return the new timeout */ + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); - case WDIOC_GETTIMEOUT: - return put_user(timeout * 60, p); + case WDIOC_KEEPALIVE: + sc1200wdt_write_data(WDTO, timeout); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + /* the API states this is given in secs */ + new_timeout /= 60; + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + timeout = new_timeout; + sc1200wdt_write_data(WDTO, timeout); + /* fall through and return the new timeout */ - case WDIOC_SETOPTIONS: - { - int options, retval = -EINVAL; + case WDIOC_GETTIMEOUT: + return put_user(timeout * 60, p); - if (get_user(options, p)) - return -EFAULT; + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; - if (options & WDIOS_DISABLECARD) { - sc1200wdt_stop(); - retval = 0; - } + if (get_user(options, p)) + return -EFAULT; - if (options & WDIOS_ENABLECARD) { - sc1200wdt_start(); - retval = 0; - } + if (options & WDIOS_DISABLECARD) { + sc1200wdt_stop(); + retval = 0; + } - return retval; + if (options & WDIOS_ENABLECARD) { + sc1200wdt_start(); + retval = 0; } + + return retval; + } + default: + return -ENOTTY; } } @@ -240,16 +258,18 @@ static int sc1200wdt_release(struct inode *inode, struct file *file) printk(KERN_INFO PFX "Watchdog disabled\n"); } else { sc1200wdt_write_data(WDTO, timeout); - printk(KERN_CRIT PFX "Unexpected close!, timeout = %d min(s)\n", timeout); + printk(KERN_CRIT PFX + "Unexpected close!, timeout = %d min(s)\n", timeout); } - up(&open_sem); + clear_bit(0, &open_flag); expect_close = 0; return 0; } -static ssize_t sc1200wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) +static ssize_t sc1200wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { if (len) { if (!nowayout) { @@ -275,7 +295,8 @@ static ssize_t sc1200wdt_write(struct file *file, const char __user *data, size_ } -static int sc1200wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) +static int sc1200wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) { if (code == SYS_DOWN || code == SYS_HALT) sc1200wdt_stop(); @@ -284,23 +305,20 @@ static int sc1200wdt_notify_sys(struct notifier_block *this, unsigned long code, } -static struct notifier_block sc1200wdt_notifier = -{ +static struct notifier_block sc1200wdt_notifier = { .notifier_call = sc1200wdt_notify_sys, }; -static const struct file_operations sc1200wdt_fops = -{ +static const struct file_operations sc1200wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = sc1200wdt_write, - .ioctl = sc1200wdt_ioctl, + .unlocked_ioctl = sc1200wdt_ioctl, .open = sc1200wdt_open, .release = sc1200wdt_release, }; -static struct miscdevice sc1200wdt_miscdev = -{ +static struct miscdevice sc1200wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &sc1200wdt_fops, @@ -312,14 +330,14 @@ static int __init sc1200wdt_probe(void) /* The probe works by reading the PMC3 register's default value of 0x0e * there is one caveat, if the device disables the parallel port or any * of the UARTs we won't be able to detect it. - * Nb. This could be done with accuracy by reading the SID registers, but - * we don't have access to those io regions. + * NB. This could be done with accuracy by reading the SID registers, + * but we don't have access to those io regions. */ unsigned char reg; sc1200wdt_read_data(PMC3, ®); - reg &= 0x0f; /* we don't want the UART busy bits */ + reg &= 0x0f; /* we don't want the UART busy bits */ return (reg == 0x0e) ? 0 : -ENODEV; } @@ -332,7 +350,8 @@ static struct pnp_device_id scl200wdt_pnp_devices[] = { {.id = ""}, }; -static int scl200wdt_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id) +static int scl200wdt_pnp_probe(struct pnp_dev *dev, + const struct pnp_device_id *dev_id) { /* this driver only supports one card at a time */ if (wdt_dev || !isapnp) @@ -347,13 +366,14 @@ static int scl200wdt_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id return -EBUSY; } - printk(KERN_INFO "scl200wdt: PnP device found at io port %#x/%d\n", io, io_len); + printk(KERN_INFO "scl200wdt: PnP device found at io port %#x/%d\n", + io, io_len); return 0; } -static void scl200wdt_pnp_remove(struct pnp_dev * dev) +static void scl200wdt_pnp_remove(struct pnp_dev *dev) { - if (wdt_dev){ + if (wdt_dev) { release_region(io, io_len); wdt_dev = NULL; } @@ -375,8 +395,6 @@ static int __init sc1200wdt_init(void) printk("%s\n", banner); - sema_init(&open_sem, 1); - #if defined CONFIG_PNP if (isapnp) { ret = pnp_register_driver(&scl200wdt_pnp_driver); @@ -410,13 +428,16 @@ static int __init sc1200wdt_init(void) ret = register_reboot_notifier(&sc1200wdt_notifier); if (ret) { - printk(KERN_ERR PFX "Unable to register reboot notifier err = %d\n", ret); + printk(KERN_ERR PFX + "Unable to register reboot notifier err = %d\n", ret); goto out_io; } ret = misc_register(&sc1200wdt_miscdev); if (ret) { - printk(KERN_ERR PFX "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR); + printk(KERN_ERR PFX + "Unable to register miscdev on minor %d\n", + WATCHDOG_MINOR); goto out_rbt; } @@ -446,7 +467,7 @@ static void __exit sc1200wdt_exit(void) unregister_reboot_notifier(&sc1200wdt_notifier); #if defined CONFIG_PNP - if(isapnp) + if (isapnp) pnp_unregister_driver(&scl200wdt_pnp_driver); else #endif -- cgit v1.2.3 From 725aad24c3ba96a7c06448c14c265a466cdbd663 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sun, 3 Aug 2008 09:33:03 -0700 Subject: __sched_setscheduler: don't do any policy checks when not "user" The "user" parameter to __sched_setscheduler indicates whether the change is being done on behalf of a user process or not. If not, we shouldn't apply any permissions checks, so don't call security_task_setscheduler(). Signed-off-by: Jeremy Fitzhardinge Tested-by: Steve Wise Cc: Rusty Russell Cc: "Rafael J. Wysocki" Signed-off-by: Linus Torvalds --- kernel/sched.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 21f7da94662e..04160d277e7a 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5004,19 +5004,21 @@ recheck: return -EPERM; } + if (user) { #ifdef CONFIG_RT_GROUP_SCHED - /* - * Do not allow realtime tasks into groups that have no runtime - * assigned. - */ - if (user - && rt_policy(policy) && task_group(p)->rt_bandwidth.rt_runtime == 0) - return -EPERM; + /* + * Do not allow realtime tasks into groups that have no runtime + * assigned. + */ + if (rt_policy(policy) && task_group(p)->rt_bandwidth.rt_runtime == 0) + return -EPERM; #endif - retval = security_task_setscheduler(p, policy, param); - if (retval) - return retval; + retval = security_task_setscheduler(p, policy, param); + if (retval) + return retval; + } + /* * make sure no PI-waiters arrive (or leave) while we are * changing the priority of the task: -- cgit v1.2.3 From 7274264f60cc0b71389efed286001ff0860c3141 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Sun, 3 Aug 2008 22:02:10 +0200 Subject: m68k: some asm-sparc include files moved So copy their contents into the asm-m68k files. Signed-off-by: Stephen Rothwell Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- include/asm-m68k/contregs.h | 51 ++++++- include/asm-m68k/fbio.h | 331 +++++++++++++++++++++++++++++++++++++++++++- include/asm-m68k/idprom.h | 21 ++- 3 files changed, 400 insertions(+), 3 deletions(-) diff --git a/include/asm-m68k/contregs.h b/include/asm-m68k/contregs.h index 1e233e7d191e..d1ea750bddfe 100644 --- a/include/asm-m68k/contregs.h +++ b/include/asm-m68k/contregs.h @@ -1,4 +1,53 @@ #ifndef _M68K_CONTREGS_H #define _M68K_CONTREGS_H -#include + +/* contregs.h: Addresses of registers in the ASI_CONTROL alternate address + * space. These are for the mmu's context register, etc. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +/* 3=sun3 + 4=sun4 (as in sun4 sysmaint student book) + c=sun4c (according to davem) */ + +#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */ +#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */ +#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */ +#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */ +#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/ +#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */ +#define AC_BUS_ERROR 0x60000000 /* 34 Not cleared on read, byte. */ +#define AC_SYNC_ERR 0x60000000 /* c fault type */ +#define AC_SYNC_VA 0x60000004 /* c fault virtual address */ +#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */ +#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */ +#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */ +#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */ +#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */ +#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */ +#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */ +#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/ + +/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress */ +#define AC_M_PCR 0x0000 /* shv Processor Control Reg */ +#define AC_M_CTPR 0x0100 /* shv Context Table Pointer Reg */ +#define AC_M_CXR 0x0200 /* shv Context Register */ +#define AC_M_SFSR 0x0300 /* shv Synchronous Fault Status Reg */ +#define AC_M_SFAR 0x0400 /* shv Synchronous Fault Address Reg */ +#define AC_M_AFSR 0x0500 /* hv Asynchronous Fault Status Reg */ +#define AC_M_AFAR 0x0600 /* hv Asynchronous Fault Address Reg */ +#define AC_M_RESET 0x0700 /* hv Reset Reg */ +#define AC_M_RPR 0x1000 /* hv Root Pointer Reg */ +#define AC_M_TSUTRCR 0x1000 /* s TLB Replacement Ctrl Reg */ +#define AC_M_IAPTP 0x1100 /* hv Instruction Access PTP */ +#define AC_M_DAPTP 0x1200 /* hv Data Access PTP */ +#define AC_M_ITR 0x1300 /* hv Index Tag Register */ +#define AC_M_TRCR 0x1400 /* hv TLB Replacement Control Reg */ +#define AC_M_SFSRX 0x1300 /* s Synch Fault Status Reg prim */ +#define AC_M_SFARX 0x1400 /* s Synch Fault Address Reg prim */ +#define AC_M_RPR1 0x1500 /* h Root Pointer Reg (entry 2) */ +#define AC_M_IAPTP1 0x1600 /* h Instruction Access PTP (entry 2) */ +#define AC_M_DAPTP1 0x1700 /* h Data Access PTP (entry 2) */ + #endif /* _M68K_CONTREGS_H */ diff --git a/include/asm-m68k/fbio.h b/include/asm-m68k/fbio.h index c17edf8c7bc4..b9215a0907d3 100644 --- a/include/asm-m68k/fbio.h +++ b/include/asm-m68k/fbio.h @@ -1 +1,330 @@ -#include +#ifndef __LINUX_FBIO_H +#define __LINUX_FBIO_H + +#include +#include + +/* Constants used for fbio SunOS compatibility */ +/* (C) 1996 Miguel de Icaza */ + +/* Frame buffer types */ +#define FBTYPE_NOTYPE -1 +#define FBTYPE_SUN1BW 0 /* mono */ +#define FBTYPE_SUN1COLOR 1 +#define FBTYPE_SUN2BW 2 +#define FBTYPE_SUN2COLOR 3 +#define FBTYPE_SUN2GP 4 +#define FBTYPE_SUN5COLOR 5 +#define FBTYPE_SUN3COLOR 6 +#define FBTYPE_MEMCOLOR 7 +#define FBTYPE_SUN4COLOR 8 + +#define FBTYPE_NOTSUN1 9 +#define FBTYPE_NOTSUN2 10 +#define FBTYPE_NOTSUN3 11 + +#define FBTYPE_SUNFAST_COLOR 12 /* cg6 */ +#define FBTYPE_SUNROP_COLOR 13 +#define FBTYPE_SUNFB_VIDEO 14 +#define FBTYPE_SUNGIFB 15 +#define FBTYPE_SUNGPLAS 16 +#define FBTYPE_SUNGP3 17 +#define FBTYPE_SUNGT 18 +#define FBTYPE_SUNLEO 19 /* zx Leo card */ +#define FBTYPE_MDICOLOR 20 /* cg14 */ +#define FBTYPE_TCXCOLOR 21 /* SUNW,tcx card */ + +#define FBTYPE_LASTPLUSONE 21 /* This is not last + 1 in fact... */ + +/* Does not seem to be listed in the Sun file either */ +#define FBTYPE_CREATOR 22 +#define FBTYPE_PCI_IGA1682 23 +#define FBTYPE_P9100COLOR 24 + +#define FBTYPE_PCI_GENERIC 1000 +#define FBTYPE_PCI_MACH64 1001 + +/* fbio ioctls */ +/* Returned by FBIOGTYPE */ +struct fbtype { + int fb_type; /* fb type, see above */ + int fb_height; /* pixels */ + int fb_width; /* pixels */ + int fb_depth; + int fb_cmsize; /* color map entries */ + int fb_size; /* fb size in bytes */ +}; +#define FBIOGTYPE _IOR('F', 0, struct fbtype) + +struct fbcmap { + int index; /* first element (0 origin) */ + int count; + unsigned char __user *red; + unsigned char __user *green; + unsigned char __user *blue; +}; + +#ifdef __KERNEL__ +#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap) +#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap) +#else +#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap) +#define FBIOGETCMAP _IOW('F', 4, struct fbcmap) +#endif + +/* # of device specific values */ +#define FB_ATTR_NDEVSPECIFIC 8 +/* # of possible emulations */ +#define FB_ATTR_NEMUTYPES 4 + +struct fbsattr { + int flags; + int emu_type; /* -1 if none */ + int dev_specific[FB_ATTR_NDEVSPECIFIC]; +}; + +struct fbgattr { + int real_type; /* real frame buffer type */ + int owner; /* unknown */ + struct fbtype fbtype; /* real frame buffer fbtype */ + struct fbsattr sattr; + int emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */ +}; +#define FBIOSATTR _IOW('F', 5, struct fbgattr) /* Unsupported: */ +#define FBIOGATTR _IOR('F', 6, struct fbgattr) /* supported */ + +#define FBIOSVIDEO _IOW('F', 7, int) +#define FBIOGVIDEO _IOR('F', 8, int) + +struct fbcursor { + short set; /* what to set, choose from the list above */ + short enable; /* cursor on/off */ + struct fbcurpos pos; /* cursor position */ + struct fbcurpos hot; /* cursor hot spot */ + struct fbcmap cmap; /* color map info */ + struct fbcurpos size; /* cursor bit map size */ + char __user *image; /* cursor image bits */ + char __user *mask; /* cursor mask bits */ +}; + +/* set/get cursor attributes/shape */ +#define FBIOSCURSOR _IOW('F', 24, struct fbcursor) +#define FBIOGCURSOR _IOWR('F', 25, struct fbcursor) + +/* set/get cursor position */ +#define FBIOSCURPOS _IOW('F', 26, struct fbcurpos) +#define FBIOGCURPOS _IOW('F', 27, struct fbcurpos) + +/* get max cursor size */ +#define FBIOGCURMAX _IOR('F', 28, struct fbcurpos) + +/* wid manipulation */ +struct fb_wid_alloc { +#define FB_WID_SHARED_8 0 +#define FB_WID_SHARED_24 1 +#define FB_WID_DBL_8 2 +#define FB_WID_DBL_24 3 + __u32 wa_type; + __s32 wa_index; /* Set on return */ + __u32 wa_count; +}; +struct fb_wid_item { + __u32 wi_type; + __s32 wi_index; + __u32 wi_attrs; + __u32 wi_values[32]; +}; +struct fb_wid_list { + __u32 wl_flags; + __u32 wl_count; + struct fb_wid_item *wl_list; +}; + +#define FBIO_WID_ALLOC _IOWR('F', 30, struct fb_wid_alloc) +#define FBIO_WID_FREE _IOW('F', 31, struct fb_wid_alloc) +#define FBIO_WID_PUT _IOW('F', 32, struct fb_wid_list) +#define FBIO_WID_GET _IOWR('F', 33, struct fb_wid_list) + +/* Creator ioctls */ +#define FFB_IOCTL ('F'<<8) +#define FFB_SYS_INFO (FFB_IOCTL|80) +#define FFB_CLUTREAD (FFB_IOCTL|81) +#define FFB_CLUTPOST (FFB_IOCTL|82) +#define FFB_SETDIAGMODE (FFB_IOCTL|83) +#define FFB_GETMONITORID (FFB_IOCTL|84) +#define FFB_GETVIDEOMODE (FFB_IOCTL|85) +#define FFB_SETVIDEOMODE (FFB_IOCTL|86) +#define FFB_SETSERVER (FFB_IOCTL|87) +#define FFB_SETOVCTL (FFB_IOCTL|88) +#define FFB_GETOVCTL (FFB_IOCTL|89) +#define FFB_GETSAXNUM (FFB_IOCTL|90) +#define FFB_FBDEBUG (FFB_IOCTL|91) + +/* Cg14 ioctls */ +#define MDI_IOCTL ('M'<<8) +#define MDI_RESET (MDI_IOCTL|1) +#define MDI_GET_CFGINFO (MDI_IOCTL|2) +#define MDI_SET_PIXELMODE (MDI_IOCTL|3) +# define MDI_32_PIX 32 +# define MDI_16_PIX 16 +# define MDI_8_PIX 8 + +struct mdi_cfginfo { + int mdi_ncluts; /* Number of implemented CLUTs in this MDI */ + int mdi_type; /* FBTYPE name */ + int mdi_height; /* height */ + int mdi_width; /* widht */ + int mdi_size; /* available ram */ + int mdi_mode; /* 8bpp, 16bpp or 32bpp */ + int mdi_pixfreq; /* pixel clock (from PROM) */ +}; + +/* SparcLinux specific ioctl for the MDI, should be replaced for + * the SET_XLUT/SET_CLUTn ioctls instead + */ +#define MDI_CLEAR_XLUT (MDI_IOCTL|9) + +/* leo & ffb ioctls */ +struct fb_clut_alloc { + __u32 clutid; /* Set on return */ + __u32 flag; + __u32 index; +}; + +struct fb_clut { +#define FB_CLUT_WAIT 0x00000001 /* Not yet implemented */ + __u32 flag; + __u32 clutid; + __u32 offset; + __u32 count; + char * red; + char * green; + char * blue; +}; + +struct fb_clut32 { + __u32 flag; + __u32 clutid; + __u32 offset; + __u32 count; + __u32 red; + __u32 green; + __u32 blue; +}; + +#define LEO_CLUTALLOC _IOWR('L', 53, struct fb_clut_alloc) +#define LEO_CLUTFREE _IOW('L', 54, struct fb_clut_alloc) +#define LEO_CLUTREAD _IOW('L', 55, struct fb_clut) +#define LEO_CLUTPOST _IOW('L', 56, struct fb_clut) +#define LEO_SETGAMMA _IOW('L', 68, int) /* Not yet implemented */ +#define LEO_GETGAMMA _IOR('L', 69, int) /* Not yet implemented */ + +#ifdef __KERNEL__ +/* Addresses on the fd of a cgsix that are mappable */ +#define CG6_FBC 0x70000000 +#define CG6_TEC 0x70001000 +#define CG6_BTREGS 0x70002000 +#define CG6_FHC 0x70004000 +#define CG6_THC 0x70005000 +#define CG6_ROM 0x70006000 +#define CG6_RAM 0x70016000 +#define CG6_DHC 0x80000000 + +#define CG3_MMAP_OFFSET 0x4000000 + +/* Addresses on the fd of a tcx that are mappable */ +#define TCX_RAM8BIT 0x00000000 +#define TCX_RAM24BIT 0x01000000 +#define TCX_UNK3 0x10000000 +#define TCX_UNK4 0x20000000 +#define TCX_CONTROLPLANE 0x28000000 +#define TCX_UNK6 0x30000000 +#define TCX_UNK7 0x38000000 +#define TCX_TEC 0x70000000 +#define TCX_BTREGS 0x70002000 +#define TCX_THC 0x70004000 +#define TCX_DHC 0x70008000 +#define TCX_ALT 0x7000a000 +#define TCX_SYNC 0x7000e000 +#define TCX_UNK2 0x70010000 + +/* CG14 definitions */ + +/* Offsets into the OBIO space: */ +#define CG14_REGS 0 /* registers */ +#define CG14_CURSORREGS 0x1000 /* cursor registers */ +#define CG14_DACREGS 0x2000 /* DAC registers */ +#define CG14_XLUT 0x3000 /* X Look Up Table -- ??? */ +#define CG14_CLUT1 0x4000 /* Color Look Up Table */ +#define CG14_CLUT2 0x5000 /* Color Look Up Table */ +#define CG14_CLUT3 0x6000 /* Color Look Up Table */ +#define CG14_AUTO 0xf000 + +#endif /* KERNEL */ + +/* These are exported to userland for applications to use */ +/* Mappable offsets for the cg14: control registers */ +#define MDI_DIRECT_MAP 0x10000000 +#define MDI_CTLREG_MAP 0x20000000 +#define MDI_CURSOR_MAP 0x30000000 +#define MDI_SHDW_VRT_MAP 0x40000000 + +/* Mappable offsets for the cg14: frame buffer resolutions */ +/* 32 bits */ +#define MDI_CHUNKY_XBGR_MAP 0x50000000 +#define MDI_CHUNKY_BGR_MAP 0x60000000 + +/* 16 bits */ +#define MDI_PLANAR_X16_MAP 0x70000000 +#define MDI_PLANAR_C16_MAP 0x80000000 + +/* 8 bit is done as CG3 MMAP offset */ +/* 32 bits, planar */ +#define MDI_PLANAR_X32_MAP 0x90000000 +#define MDI_PLANAR_B32_MAP 0xa0000000 +#define MDI_PLANAR_G32_MAP 0xb0000000 +#define MDI_PLANAR_R32_MAP 0xc0000000 + +/* Mappable offsets on leo */ +#define LEO_SS0_MAP 0x00000000 +#define LEO_LC_SS0_USR_MAP 0x00800000 +#define LEO_LD_SS0_MAP 0x00801000 +#define LEO_LX_CURSOR_MAP 0x00802000 +#define LEO_SS1_MAP 0x00803000 +#define LEO_LC_SS1_USR_MAP 0x01003000 +#define LEO_LD_SS1_MAP 0x01004000 +#define LEO_UNK_MAP 0x01005000 +#define LEO_LX_KRN_MAP 0x01006000 +#define LEO_LC_SS0_KRN_MAP 0x01007000 +#define LEO_LC_SS1_KRN_MAP 0x01008000 +#define LEO_LD_GBL_MAP 0x01009000 +#define LEO_UNK2_MAP 0x0100a000 + +#ifdef __KERNEL__ +struct fbcmap32 { + int index; /* first element (0 origin) */ + int count; + u32 red; + u32 green; + u32 blue; +}; + +#define FBIOPUTCMAP32 _IOW('F', 3, struct fbcmap32) +#define FBIOGETCMAP32 _IOW('F', 4, struct fbcmap32) + +struct fbcursor32 { + short set; /* what to set, choose from the list above */ + short enable; /* cursor on/off */ + struct fbcurpos pos; /* cursor position */ + struct fbcurpos hot; /* cursor hot spot */ + struct fbcmap32 cmap; /* color map info */ + struct fbcurpos size; /* cursor bit map size */ + u32 image; /* cursor image bits */ + u32 mask; /* cursor mask bits */ +}; + +#define FBIOSCURSOR32 _IOW('F', 24, struct fbcursor32) +#define FBIOGCURSOR32 _IOW('F', 25, struct fbcursor32) +#endif + +#endif /* __LINUX_FBIO_H */ diff --git a/include/asm-m68k/idprom.h b/include/asm-m68k/idprom.h index 4349eaf3cfe4..160616a89e05 100644 --- a/include/asm-m68k/idprom.h +++ b/include/asm-m68k/idprom.h @@ -1,6 +1,25 @@ #ifndef _M68K_IDPROM_H #define _M68K_IDPROM_H -#include +/* + * idprom.h: Macros and defines for idprom routines + * + * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu) + */ + +#include + +struct idprom { + u8 id_format; /* Format identifier (always 0x01) */ + u8 id_machtype; /* Machine type */ + u8 id_ethaddr[6]; /* Hardware ethernet address */ + s32 id_date; /* Date of manufacture */ + u32 id_sernum:24; /* Unique serial number */ + u8 id_cksum; /* Checksum - xor of the data bytes */ + u8 reserved[16]; +}; + +extern struct idprom *idprom; +extern void idprom_init(void); /* Sun3: in control space */ #define SUN3_IDPROM_BASE 0x00000000 -- cgit v1.2.3 From 18f6db95dcfa68e93bafe435381299abbffb5c7e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 11:21:23 +0100 Subject: mn10300: Fix up __bug_table handling in module loader. Platforms that are using GENERIC_BUG must call in to module_bug_finalize()/module_bug_cleanup() in order to scan modules with their own __bug_table sections that are otherwise unaccounted. Signed-off-by: Paul Mundt Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/module.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c index 0e4d2f6fa6e8..8fa36893df7a 100644 --- a/arch/mn10300/kernel/module.c +++ b/arch/mn10300/kernel/module.c @@ -24,6 +24,7 @@ #include #include #include +#include #if 0 #define DEBUGP printk @@ -195,7 +196,7 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) { - return 0; + return module_bug_finalize(hdr, sechdrs, me); } /* @@ -203,4 +204,5 @@ int module_finalize(const Elf_Ehdr *hdr, */ void module_arch_cleanup(struct module *mod) { + module_bug_cleanup(mod); } -- cgit v1.2.3 From 115a326c1e5cab457924356123bbfd7d783ecf9d Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Mon, 4 Aug 2008 13:56:01 -0700 Subject: tracehook: kerneldoc fix My last change to tracehook.h made it confuse the kerneldoc parser. Move the #define's before the comment so it's happy again. Signed-off-by: Roland McGrath Acked-by: Randy Dunlap Signed-off-by: Linus Torvalds --- include/linux/tracehook.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index 12532839f508..ab3ef7aefa95 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -487,6 +487,9 @@ static inline int tracehook_notify_jctl(int notify, int why) return notify || (current->ptrace & PT_PTRACED); } +#define DEATH_REAP -1 +#define DEATH_DELAYED_GROUP_LEADER -2 + /** * tracehook_notify_death - task is dead, ready to notify parent * @task: @current task now exiting @@ -501,8 +504,6 @@ static inline int tracehook_notify_jctl(int notify, int why) * * Called with write_lock_irq(&tasklist_lock) held. */ -#define DEATH_REAP -1 -#define DEATH_DELAYED_GROUP_LEADER -2 static inline int tracehook_notify_death(struct task_struct *task, void **death_cookie, int group_dead) { -- cgit v1.2.3 From ab277121426edca2ee0601fc6318c9467350771e Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 29 Jul 2008 14:08:14 +0800 Subject: [ARM] pxa: introduce reset.h for reset specific header information Signed-off-by: Eric Miao --- arch/arm/mach-pxa/reset.c | 1 + arch/arm/mach-pxa/spitz.c | 1 + arch/arm/mach-pxa/tosa.c | 1 + include/asm-arm/arch-pxa/hardware.h | 5 ----- include/asm-arm/arch-pxa/reset.h | 9 +++++++++ 5 files changed, 12 insertions(+), 5 deletions(-) create mode 100644 include/asm-arm/arch-pxa/reset.h diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index 9d39dea57ce2..d610a1244abb 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -12,6 +12,7 @@ #include #include +#include static void do_hw_reset(void); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 762249c03ded..207fe3e6a3d2 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index fea17ce6b55f..4bd7d4f006e2 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index 979a45695d7d..351d0a721769 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -224,11 +224,6 @@ extern void pxa_gpio_set_value(unsigned gpio, int value); */ extern unsigned int get_memclk_frequency_10khz(void); -/* - * register GPIO as reset generator - */ -extern int init_gpio_reset(int gpio); - #endif #if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) diff --git a/include/asm-arm/arch-pxa/reset.h b/include/asm-arm/arch-pxa/reset.h new file mode 100644 index 000000000000..6ca72c5cf7db --- /dev/null +++ b/include/asm-arm/arch-pxa/reset.h @@ -0,0 +1,9 @@ +#ifndef __ASM_ARCH_RESET_H +#define __ASM_ARCH_RESET_H + +/* + * register GPIO as reset generator + */ +extern int init_gpio_reset(int gpio); + +#endif /* __ASM_ARCH_RESET_H */ -- cgit v1.2.3 From 04fef228fb00dd79475a2313f4ba73b4fbfe2faa Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 29 Jul 2008 14:26:00 +0800 Subject: [ARM] pxa: introduce reset_status and clear_reset_status for driver's usage Due to the problem of reset status bits being handled by different registers between pxa2xx and pxa3xx, introduce a global reset_status variable, initialized by SoC-specific code and later being used by other drivers. And also introduce clear_reset_status(), which is used to clear the corresponding status bits. Pass RESET_STATUS_ALL to clear all bits. Signed-off-by: Eric Miao --- arch/arm/mach-pxa/generic.c | 10 ++++++++++ arch/arm/mach-pxa/generic.h | 8 ++++++++ arch/arm/mach-pxa/pxa25x.c | 4 ++++ arch/arm/mach-pxa/pxa27x.c | 4 ++++ arch/arm/mach-pxa/pxa2xx.c | 9 +++++++++ arch/arm/mach-pxa/pxa3xx.c | 10 ++++++++++ arch/arm/mach-pxa/reset.c | 7 ++++--- arch/arm/mach-sa1100/generic.c | 3 +++ include/asm-arm/arch-pxa/reset.h | 9 +++++++++ include/asm-arm/arch-sa1100/reset.h | 18 ++++++++++++++++++ 10 files changed, 79 insertions(+), 3 deletions(-) create mode 100644 include/asm-arm/arch-sa1100/reset.h diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index ca053226fba0..36638926c5ce 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -26,9 +26,19 @@ #include #include +#include #include "generic.h" +void clear_reset_status(unsigned int mask) +{ + if (cpu_is_pxa2xx()) + pxa2xx_clear_reset_status(mask); + + if (cpu_is_pxa3xx()) + pxa3xx_clear_reset_status(mask); +} + /* * Get the clock frequency as reflected by CCCR and the turbo flag. * We assume these values have been applied via a fcs. diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 5bb7ae757831..041c048320e4 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -47,12 +47,20 @@ extern unsigned pxa27x_get_memclk_frequency_10khz(void); #define pxa27x_get_memclk_frequency_10khz() (0) #endif +#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) +extern void pxa2xx_clear_reset_status(unsigned int); +#else +static inline void pxa2xx_clear_reset_status(unsigned int mask) {} +#endif + #ifdef CONFIG_PXA3xx extern unsigned pxa3xx_get_clk_frequency_khz(int); extern unsigned pxa3xx_get_memclk_frequency_10khz(void); +extern void pxa3xx_clear_reset_status(unsigned int); #else #define pxa3xx_get_clk_frequency_khz(x) (0) #define pxa3xx_get_memclk_frequency_10khz() (0) +static inline void pxa3xx_clear_reset_status(unsigned int mask) {} #endif extern struct sysdev_class pxa_irq_sysclass; diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index c5b845b935bb..49a7a296ff31 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -348,6 +349,9 @@ static int __init pxa25x_init(void) clks_register(&pxa25x_hwuart_clk, 1); if (cpu_is_pxa21x() || cpu_is_pxa25x()) { + + reset_status = RCSR; + clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks)); if ((ret = pxa_init_dma(16))) diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index d5d14ea33f27..a8c12347a5a9 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -384,6 +385,9 @@ static int __init pxa27x_init(void) int i, ret = 0; if (cpu_is_pxa27x()) { + + reset_status = RCSR; + clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks)); if ((ret = pxa_init_dma(32))) diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c index d4f6415e8413..d93d3e6a6e27 100644 --- a/arch/arm/mach-pxa/pxa2xx.c +++ b/arch/arm/mach-pxa/pxa2xx.c @@ -14,10 +14,19 @@ #include #include +#include +#include #include #include +#include #include +void pxa2xx_clear_reset_status(unsigned int mask) +{ + /* RESET_STATUS_* has a 1:1 mapping with RCSR */ + RCSR = mask; +} + static unsigned long pxa2xx_mfp_fir[] = { GPIO46_FICP_RXD, GPIO47_FICP_TXD, diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index f491025a0c82..3d36c790f5ce 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -24,6 +24,7 @@ #include #include +#include #include #include #include @@ -109,6 +110,12 @@ unsigned int pxa3xx_get_memclk_frequency_10khz(void) return (clk / 10000); } +void pxa3xx_clear_reset_status(unsigned int mask) +{ + /* RESET_STATUS_* has a 1:1 mapping with ARSR */ + ARSR = mask; +} + /* * Return the current AC97 clock frequency. */ @@ -532,6 +539,9 @@ static int __init pxa3xx_init(void) int i, ret = 0; if (cpu_is_pxa3xx()) { + + reset_status = ARSR; + /* * clear RDH bit every time after reset * diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index d610a1244abb..56f60d923a9d 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -11,9 +11,11 @@ #include #include -#include #include +unsigned int reset_status; +EXPORT_SYMBOL(reset_status); + static void do_hw_reset(void); static int reset_gpio = -1; @@ -78,8 +80,7 @@ static void do_hw_reset(void) void arch_reset(char mode) { - if (cpu_is_pxa2xx()) - RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + clear_reset_status(RESET_STATUS_ALL); switch (mode) { case 's': diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 0c2fa1c4fb4c..3b6fc090c8ef 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -31,6 +31,9 @@ #include "generic.h" +unsigned int reset_status; +EXPORT_SYMBOL(reset_status); + #define NR_FREQS 16 /* diff --git a/include/asm-arm/arch-pxa/reset.h b/include/asm-arm/arch-pxa/reset.h index 6ca72c5cf7db..9489a48871a8 100644 --- a/include/asm-arm/arch-pxa/reset.h +++ b/include/asm-arm/arch-pxa/reset.h @@ -1,6 +1,15 @@ #ifndef __ASM_ARCH_RESET_H #define __ASM_ARCH_RESET_H +#define RESET_STATUS_HARDWARE (1 << 0) /* Hardware Reset */ +#define RESET_STATUS_WATCHDOG (1 << 1) /* Watchdog Reset */ +#define RESET_STATUS_LOWPOWER (1 << 2) /* Low Power/Sleep Exit */ +#define RESET_STATUS_GPIO (1 << 3) /* GPIO Reset */ +#define RESET_STATUS_ALL (0xf) + +extern unsigned int reset_status; +extern void clear_reset_status(unsigned int mask); + /* * register GPIO as reset generator */ diff --git a/include/asm-arm/arch-sa1100/reset.h b/include/asm-arm/arch-sa1100/reset.h new file mode 100644 index 000000000000..f61957e6842a --- /dev/null +++ b/include/asm-arm/arch-sa1100/reset.h @@ -0,0 +1,18 @@ +#ifndef __ASM_ARCH_RESET_H +#define __ASM_ARCH_RESET_H + +#include "hardware.h" + +#define RESET_STATUS_HARDWARE (1 << 0) /* Hardware Reset */ +#define RESET_STATUS_WATCHDOG (1 << 1) /* Watchdog Reset */ +#define RESET_STATUS_LOWPOWER (1 << 2) /* Exit from Low Power/Sleep */ +#define RESET_STATUS_GPIO (1 << 3) /* GPIO Reset */ +#define RESET_STATUS_ALL (0xf) + +extern unsigned int reset_status; +static inline void clear_reset_status(unsigned int mask) +{ + RCSR = mask; +} + +#endif /* __ASM_ARCH_RESET_H */ -- cgit v1.2.3 From 214c6a7ed13e01cab2addeef56124067e4d20147 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 29 Jul 2008 14:39:34 +0800 Subject: [ARM] sa1100_wdt: use reset_status to remember watchdog reset status Signed-off-by: Eric Miao --- drivers/watchdog/sa1100_wdt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index 34a2b3b81800..e42002d2f815 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -31,6 +31,8 @@ #include #endif +#include + #include #include @@ -162,7 +164,8 @@ static int __init sa1100dog_init(void) * we suspend, RCSR will be cleared, and the watchdog * reset reason will be lost. */ - boot_status = (RCSR & RCSR_WDR) ? WDIOF_CARDRESET : 0; + boot_status = (reset_status & RESET_STATUS_WATCHDOG) ? + WDIOF_CARDRESET : 0; pre_margin = OSCR_FREQ * margin; ret = misc_register(&sa1100dog_miscdev); -- cgit v1.2.3 From 1c5402ba55e809f0b685f07728794ea27b197f33 Mon Sep 17 00:00:00 2001 From: Valentine Barshak Date: Thu, 10 Jul 2008 04:02:34 +1000 Subject: powerpc/44x: Adjust warp-nand resource end address Adjust the NDFC resource end value (resource size = end - start + 1). Signed-off-by: Valentine Barshak Signed-off-by: Josh Boyer --- arch/powerpc/platforms/44x/warp-nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c index e55746b824b4..89ecd76127d8 100644 --- a/arch/powerpc/platforms/44x/warp-nand.c +++ b/arch/powerpc/platforms/44x/warp-nand.c @@ -24,7 +24,7 @@ static struct resource warp_ndfc = { .start = WARP_NAND_FLASH_REG_ADDR, - .end = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE, + .end = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE - 1, .flags = IORESOURCE_MEM, }; -- cgit v1.2.3 From 048040a36d46dced846b058bc083c212e0c75615 Mon Sep 17 00:00:00 2001 From: Sean MacLennan Date: Sat, 26 Jul 2008 11:45:10 +1000 Subject: powerpc/4xx: Cleanup Warp for i2c driver changes. This patch removes the i2c code which is now obsolete due to the new ibm iic driver walking the device tree for child nodes. There are two other small cleanups that came indirectly from the ad7414 code review. Make sure Tlow is correct and handle the case where i2c_smbus_read_word_data fails. Signed-off-by: Sean MacLennan Signed-off-by: Josh Boyer --- arch/powerpc/platforms/44x/warp.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index 9565995cba7f..960edf89be51 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -30,18 +30,6 @@ static __initdata struct of_device_id warp_of_bus[] = { {}, }; -static __initdata struct i2c_board_info warp_i2c_info[] = { - { I2C_BOARD_INFO("ad7414", 0x4a) } -}; - -static int __init warp_arch_init(void) -{ - /* This should go away once support is moved to the dts. */ - i2c_register_board_info(0, warp_i2c_info, ARRAY_SIZE(warp_i2c_info)); - return 0; -} -machine_arch_initcall(warp, warp_arch_init); - static int __init warp_device_probe(void) { of_platform_bus_probe(NULL, warp_of_bus, NULL); @@ -223,7 +211,7 @@ static void pika_setup_critical_temp(struct i2c_client *client) /* These registers are in 1 degree increments. */ i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */ - i2c_smbus_write_byte_data(client, 3, 55); /* Tlow */ + i2c_smbus_write_byte_data(client, 3, 0); /* Tlow */ np = of_find_compatible_node(NULL, NULL, "adi,ad7414"); if (np == NULL) { @@ -289,8 +277,15 @@ found_it: printk(KERN_INFO "PIKA DTM thread running.\n"); while (!kthread_should_stop()) { - u16 temp = swab16(i2c_smbus_read_word_data(client, 0)); - out_be32(fpga + 0x20, temp); + int val; + + val = i2c_smbus_read_word_data(client, 0); + if (val < 0) + dev_dbg(&client->dev, "DTM read temp failed.\n"); + else { + s16 temp = swab16(val); + out_be32(fpga + 0x20, temp); + } pika_dtm_check_fan(fpga); -- cgit v1.2.3 From 1d555cf168315ceb5422df9bff348466da2c549d Mon Sep 17 00:00:00 2001 From: Sean MacLennan Date: Sat, 26 Jul 2008 11:50:19 +1000 Subject: powerpc/44x: Warp DTS changes for board updates Added support for the new at24 eeprom driver. Documented a new fpga section, the DMA scatter gather list. Removed index from i2c. No longer needed. Fixed the leds section. Signed-off-by: Sean MacLennan Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/warp.dts | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index 340018cf16b7..730073671bb5 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -139,6 +139,11 @@ interrupt-parent = <&UIC0>; }; + fpga@2,2000 { + compatible = "pika,fpga-sgl"; + reg = <0x00000002 0x00002000 0x00000200>; + }; + fpga@2,4000 { compatible = "pika,fpga-sd"; reg = <0x00000002 0x00004000 0x00000A00>; @@ -181,7 +186,6 @@ reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; - index = <0x0>; #address-cells = <1>; #size-cells = <0>; @@ -191,6 +195,12 @@ interrupts = <0x19 0x8>; interrupt-parent = <&UIC0>; }; + + /* This will create 52 and 53 */ + at24@52 { + compatible = "at,24c04"; + reg = <0x52>; + }; }; GPIO0: gpio@ef600b00 { @@ -209,7 +219,13 @@ led@31 { compatible = "linux,gpio-led"; linux,name = ":green:"; - gpios = <&GPIO1 0x30 0>; + gpios = <&GPIO1 31 0>; + }; + + led@30 { + compatible = "linux,gpio-led"; + linux,name = ":red:"; + gpios = <&GPIO1 30 0>; }; }; -- cgit v1.2.3 From 929badad6296c9682d271c97f39b78cb7007128a Mon Sep 17 00:00:00 2001 From: Sean MacLennan Date: Thu, 31 Jul 2008 13:41:11 +1000 Subject: powerpc/44x: Incorrect NOR offset in Warp DTS FPGA offset in NOR flash was converted incorrectly when switching from 64M to 4M flash. Signed-off-by: Sean MacLennan Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/warp.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index 730073671bb5..f4e4ba69eef7 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -157,7 +157,7 @@ #size-cells = <1>; partition@300000 { label = "fpga"; - reg = <0x0030000 0x00040000>; + reg = <0x0300000 0x00040000>; }; partition@340000 { label = "env"; -- cgit v1.2.3 From 529ae9aaa08378cfe2a4350bded76f32cc8ff0ce Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Sat, 2 Aug 2008 12:01:03 +0200 Subject: mm: rename page trylock Converting page lock to new locking bitops requires a change of page flag operation naming, so we might as well convert it to something nicer (!TestSetPageLocked_Lock => trylock_page, SetPageLocked => set_page_locked). This also facilitates lockdeping of page lock. Signed-off-by: Nick Piggin Acked-by: KOSAKI Motohiro Acked-by: Peter Zijlstra Acked-by: Andrew Morton Acked-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- drivers/scsi/sg.c | 2 +- fs/afs/write.c | 2 +- fs/cifs/file.c | 2 +- fs/jbd/commit.c | 4 +-- fs/jbd2/commit.c | 2 +- fs/reiserfs/journal.c | 2 +- fs/splice.c | 2 +- fs/xfs/linux-2.6/xfs_aops.c | 4 +-- include/linux/page-flags.h | 2 +- include/linux/pagemap.h | 67 +++++++++++++++++++++++++++------------------ mm/filemap.c | 12 ++++---- mm/memory.c | 2 +- mm/migrate.c | 4 +-- mm/rmap.c | 2 +- mm/shmem.c | 4 +-- mm/swap.c | 2 +- mm/swap_state.c | 8 +++--- mm/swapfile.c | 2 +- mm/truncate.c | 4 +-- mm/vmscan.c | 4 +-- 20 files changed, 74 insertions(+), 59 deletions(-) diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index d3b8ebb83776..3d36270a8b4d 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1747,7 +1747,7 @@ st_map_user_pages(struct scatterlist *sgl, const unsigned int max_pages, */ flush_dcache_page(pages[i]); /* ?? Is locking needed? I don't think so */ - /* if (TestSetPageLocked(pages[i])) + /* if (!trylock_page(pages[i])) goto out_unlock; */ } diff --git a/fs/afs/write.c b/fs/afs/write.c index 9a849ad3c489..065b4e10681a 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -404,7 +404,7 @@ static int afs_write_back_from_locked_page(struct afs_writeback *wb, page = pages[loop]; if (page->index > wb->last) break; - if (TestSetPageLocked(page)) + if (!trylock_page(page)) break; if (!PageDirty(page) || page_private(page) != (unsigned long) wb) { diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 0aac824371a5..e692c42f24b5 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1280,7 +1280,7 @@ retry: if (first < 0) lock_page(page); - else if (TestSetPageLocked(page)) + else if (!trylock_page(page)) break; if (unlikely(page->mapping != mapping)) { diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c index 2eccbfaa1d48..81a9ad7177ca 100644 --- a/fs/jbd/commit.c +++ b/fs/jbd/commit.c @@ -63,7 +63,7 @@ static void release_buffer_page(struct buffer_head *bh) goto nope; /* OK, it's a truncated page */ - if (TestSetPageLocked(page)) + if (!trylock_page(page)) goto nope; page_cache_get(page); @@ -446,7 +446,7 @@ void journal_commit_transaction(journal_t *journal) spin_lock(&journal->j_list_lock); } if (unlikely(!buffer_uptodate(bh))) { - if (TestSetPageLocked(bh->b_page)) { + if (!trylock_page(bh->b_page)) { spin_unlock(&journal->j_list_lock); lock_page(bh->b_page); spin_lock(&journal->j_list_lock); diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index adf0395f318e..f2ad061e95ec 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -67,7 +67,7 @@ static void release_buffer_page(struct buffer_head *bh) goto nope; /* OK, it's a truncated page */ - if (TestSetPageLocked(page)) + if (!trylock_page(page)) goto nope; page_cache_get(page); diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index c8f60ee183b5..ce2208b27118 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -627,7 +627,7 @@ static int journal_list_still_alive(struct super_block *s, static void release_buffer_page(struct buffer_head *bh) { struct page *page = bh->b_page; - if (!page->mapping && !TestSetPageLocked(page)) { + if (!page->mapping && trylock_page(page)) { page_cache_get(page); put_bh(bh); if (!page->mapping) diff --git a/fs/splice.c b/fs/splice.c index b30311ba8af6..1bbc6f4bb09c 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -371,7 +371,7 @@ __generic_file_splice_read(struct file *in, loff_t *ppos, * for an in-flight io page */ if (flags & SPLICE_F_NONBLOCK) { - if (TestSetPageLocked(page)) { + if (!trylock_page(page)) { error = -EAGAIN; break; } diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c index 0b211cba1909..fa73179233ad 100644 --- a/fs/xfs/linux-2.6/xfs_aops.c +++ b/fs/xfs/linux-2.6/xfs_aops.c @@ -675,7 +675,7 @@ xfs_probe_cluster( } else pg_offset = PAGE_CACHE_SIZE; - if (page->index == tindex && !TestSetPageLocked(page)) { + if (page->index == tindex && trylock_page(page)) { pg_len = xfs_probe_page(page, pg_offset, mapped); unlock_page(page); } @@ -759,7 +759,7 @@ xfs_convert_page( if (page->index != tindex) goto fail; - if (TestSetPageLocked(page)) + if (!trylock_page(page)) goto fail; if (PageWriteback(page)) goto fail_unlock_page; diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 25aaccdb2f26..c74d3e875314 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -163,7 +163,7 @@ static inline int Page##uname(struct page *page) \ struct page; /* forward declaration */ -PAGEFLAG(Locked, locked) TESTSCFLAG(Locked, locked) +TESTPAGEFLAG(Locked, locked) PAGEFLAG(Error, error) PAGEFLAG(Referenced, referenced) TESTCLEARFLAG(Referenced, referenced) PAGEFLAG(Dirty, dirty) TESTSCFLAG(Dirty, dirty) __CLEARPAGEFLAG(Dirty, dirty) diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index 69ed3cb1197a..5da31c12101c 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -250,29 +250,6 @@ static inline struct page *read_mapping_page(struct address_space *mapping, return read_cache_page(mapping, index, filler, data); } -int add_to_page_cache_locked(struct page *page, struct address_space *mapping, - pgoff_t index, gfp_t gfp_mask); -int add_to_page_cache_lru(struct page *page, struct address_space *mapping, - pgoff_t index, gfp_t gfp_mask); -extern void remove_from_page_cache(struct page *page); -extern void __remove_from_page_cache(struct page *page); - -/* - * Like add_to_page_cache_locked, but used to add newly allocated pages: - * the page is new, so we can just run SetPageLocked() against it. - */ -static inline int add_to_page_cache(struct page *page, - struct address_space *mapping, pgoff_t offset, gfp_t gfp_mask) -{ - int error; - - SetPageLocked(page); - error = add_to_page_cache_locked(page, mapping, offset, gfp_mask); - if (unlikely(error)) - ClearPageLocked(page); - return error; -} - /* * Return byte-offset into filesystem object for page. */ @@ -294,13 +271,28 @@ extern int __lock_page_killable(struct page *page); extern void __lock_page_nosync(struct page *page); extern void unlock_page(struct page *page); +static inline void set_page_locked(struct page *page) +{ + set_bit(PG_locked, &page->flags); +} + +static inline void clear_page_locked(struct page *page) +{ + clear_bit(PG_locked, &page->flags); +} + +static inline int trylock_page(struct page *page) +{ + return !test_and_set_bit(PG_locked, &page->flags); +} + /* * lock_page may only be called if we have the page's inode pinned. */ static inline void lock_page(struct page *page) { might_sleep(); - if (TestSetPageLocked(page)) + if (!trylock_page(page)) __lock_page(page); } @@ -312,7 +304,7 @@ static inline void lock_page(struct page *page) static inline int lock_page_killable(struct page *page) { might_sleep(); - if (TestSetPageLocked(page)) + if (!trylock_page(page)) return __lock_page_killable(page); return 0; } @@ -324,7 +316,7 @@ static inline int lock_page_killable(struct page *page) static inline void lock_page_nosync(struct page *page) { might_sleep(); - if (TestSetPageLocked(page)) + if (!trylock_page(page)) __lock_page_nosync(page); } @@ -409,4 +401,27 @@ static inline int fault_in_pages_readable(const char __user *uaddr, int size) return ret; } +int add_to_page_cache_locked(struct page *page, struct address_space *mapping, + pgoff_t index, gfp_t gfp_mask); +int add_to_page_cache_lru(struct page *page, struct address_space *mapping, + pgoff_t index, gfp_t gfp_mask); +extern void remove_from_page_cache(struct page *page); +extern void __remove_from_page_cache(struct page *page); + +/* + * Like add_to_page_cache_locked, but used to add newly allocated pages: + * the page is new, so we can just run set_page_locked() against it. + */ +static inline int add_to_page_cache(struct page *page, + struct address_space *mapping, pgoff_t offset, gfp_t gfp_mask) +{ + int error; + + set_page_locked(page); + error = add_to_page_cache_locked(page, mapping, offset, gfp_mask); + if (unlikely(error)) + clear_page_locked(page); + return error; +} + #endif /* _LINUX_PAGEMAP_H */ diff --git a/mm/filemap.c b/mm/filemap.c index d97d1ad55473..54e968650855 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -558,14 +558,14 @@ EXPORT_SYMBOL(wait_on_page_bit); * But that's OK - sleepers in wait_on_page_writeback() just go back to sleep. * * The first mb is necessary to safely close the critical section opened by the - * TestSetPageLocked(), the second mb is necessary to enforce ordering between - * the clear_bit and the read of the waitqueue (to avoid SMP races with a - * parallel wait_on_page_locked()). + * test_and_set_bit() to lock the page; the second mb is necessary to enforce + * ordering between the clear_bit and the read of the waitqueue (to avoid SMP + * races with a parallel wait_on_page_locked()). */ void unlock_page(struct page *page) { smp_mb__before_clear_bit(); - if (!TestClearPageLocked(page)) + if (!test_and_clear_bit(PG_locked, &page->flags)) BUG(); smp_mb__after_clear_bit(); wake_up_page(page, PG_locked); @@ -931,7 +931,7 @@ grab_cache_page_nowait(struct address_space *mapping, pgoff_t index) struct page *page = find_get_page(mapping, index); if (page) { - if (!TestSetPageLocked(page)) + if (trylock_page(page)) return page; page_cache_release(page); return NULL; @@ -1027,7 +1027,7 @@ find_page: if (inode->i_blkbits == PAGE_CACHE_SHIFT || !mapping->a_ops->is_partially_uptodate) goto page_not_up_to_date; - if (TestSetPageLocked(page)) + if (!trylock_page(page)) goto page_not_up_to_date; if (!mapping->a_ops->is_partially_uptodate(page, desc, offset)) diff --git a/mm/memory.c b/mm/memory.c index a472bcd4b061..1002f473f497 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1789,7 +1789,7 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, * not dirty accountable. */ if (PageAnon(old_page)) { - if (!TestSetPageLocked(old_page)) { + if (trylock_page(old_page)) { reuse = can_share_swap_page(old_page); unlock_page(old_page); } diff --git a/mm/migrate.c b/mm/migrate.c index 153572fb60b8..2a80136b23bb 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -605,7 +605,7 @@ static int move_to_new_page(struct page *newpage, struct page *page) * establishing additional references. We are the only one * holding a reference to the new page at this point. */ - if (TestSetPageLocked(newpage)) + if (!trylock_page(newpage)) BUG(); /* Prepare mapping for the new page.*/ @@ -667,7 +667,7 @@ static int unmap_and_move(new_page_t get_new_page, unsigned long private, BUG_ON(charge); rc = -EAGAIN; - if (TestSetPageLocked(page)) { + if (!trylock_page(page)) { if (!force) goto move_newpage; lock_page(page); diff --git a/mm/rmap.c b/mm/rmap.c index 94a5246a3f98..1ea4e6fcee77 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -422,7 +422,7 @@ int page_referenced(struct page *page, int is_locked, referenced += page_referenced_anon(page, mem_cont); else if (is_locked) referenced += page_referenced_file(page, mem_cont); - else if (TestSetPageLocked(page)) + else if (!trylock_page(page)) referenced++; else { if (page->mapping) diff --git a/mm/shmem.c b/mm/shmem.c index c1e5a3b4f758..04fb4f1ab88e 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -1265,7 +1265,7 @@ repeat: } /* We have to do this with page locked to prevent races */ - if (TestSetPageLocked(swappage)) { + if (!trylock_page(swappage)) { shmem_swp_unmap(entry); spin_unlock(&info->lock); wait_on_page_locked(swappage); @@ -1329,7 +1329,7 @@ repeat: shmem_swp_unmap(entry); filepage = find_get_page(mapping, idx); if (filepage && - (!PageUptodate(filepage) || TestSetPageLocked(filepage))) { + (!PageUptodate(filepage) || !trylock_page(filepage))) { spin_unlock(&info->lock); wait_on_page_locked(filepage); page_cache_release(filepage); diff --git a/mm/swap.c b/mm/swap.c index 7417a2adbe50..9e0cb3118079 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -444,7 +444,7 @@ void pagevec_strip(struct pagevec *pvec) for (i = 0; i < pagevec_count(pvec); i++) { struct page *page = pvec->pages[i]; - if (PagePrivate(page) && !TestSetPageLocked(page)) { + if (PagePrivate(page) && trylock_page(page)) { if (PagePrivate(page)) try_to_release_page(page, 0); unlock_page(page); diff --git a/mm/swap_state.c b/mm/swap_state.c index b8035b055129..167cf2dc8a03 100644 --- a/mm/swap_state.c +++ b/mm/swap_state.c @@ -201,7 +201,7 @@ void delete_from_swap_cache(struct page *page) */ static inline void free_swap_cache(struct page *page) { - if (PageSwapCache(page) && !TestSetPageLocked(page)) { + if (PageSwapCache(page) && trylock_page(page)) { remove_exclusive_swap_page(page); unlock_page(page); } @@ -302,9 +302,9 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask, * re-using the just freed swap entry for an existing page. * May fail (-ENOMEM) if radix-tree node allocation failed. */ - SetPageLocked(new_page); + set_page_locked(new_page); err = add_to_swap_cache(new_page, entry, gfp_mask & GFP_KERNEL); - if (!err) { + if (likely(!err)) { /* * Initiate read into locked page and return. */ @@ -312,7 +312,7 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask, swap_readpage(NULL, new_page); return new_page; } - ClearPageLocked(new_page); + clear_page_locked(new_page); swap_free(entry); } while (err != -ENOMEM); diff --git a/mm/swapfile.c b/mm/swapfile.c index bb7f79641f9e..1e330f2998fa 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -403,7 +403,7 @@ void free_swap_and_cache(swp_entry_t entry) if (p) { if (swap_entry_free(p, swp_offset(entry)) == 1) { page = find_get_page(&swapper_space, entry.val); - if (page && unlikely(TestSetPageLocked(page))) { + if (page && unlikely(!trylock_page(page))) { page_cache_release(page); page = NULL; } diff --git a/mm/truncate.c b/mm/truncate.c index 894e9a70699f..250505091d37 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -187,7 +187,7 @@ void truncate_inode_pages_range(struct address_space *mapping, if (page_index > next) next = page_index; next++; - if (TestSetPageLocked(page)) + if (!trylock_page(page)) continue; if (PageWriteback(page)) { unlock_page(page); @@ -280,7 +280,7 @@ unsigned long __invalidate_mapping_pages(struct address_space *mapping, pgoff_t index; int lock_failed; - lock_failed = TestSetPageLocked(page); + lock_failed = !trylock_page(page); /* * We really shouldn't be looking at the ->index of an diff --git a/mm/vmscan.c b/mm/vmscan.c index 75be453628bf..1ff1a58e7c10 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -496,7 +496,7 @@ static unsigned long shrink_page_list(struct list_head *page_list, page = lru_to_page(page_list); list_del(&page->lru); - if (TestSetPageLocked(page)) + if (!trylock_page(page)) goto keep; VM_BUG_ON(PageActive(page)); @@ -582,7 +582,7 @@ static unsigned long shrink_page_list(struct list_head *page_list, * A synchronous write - probably a ramdisk. Go * ahead and try to reclaim the page. */ - if (TestSetPageLocked(page)) + if (!trylock_page(page)) goto keep; if (PageDirty(page) || PageWriteback(page)) goto keep_locked; -- cgit v1.2.3 From ca5de404ff036a29b25e9a83f6919c9f606c5841 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Sat, 2 Aug 2008 12:02:13 +0200 Subject: fs: rename buffer trylock Like the page lock change, this also requires name change, so convert the raw test_and_set bitop to a trylock. Signed-off-by: Nick Piggin Signed-off-by: Linus Torvalds --- fs/buffer.c | 4 ++-- fs/jbd/commit.c | 2 +- fs/ntfs/aops.c | 2 +- fs/ntfs/compress.c | 2 +- fs/ntfs/mft.c | 4 ++-- fs/reiserfs/inode.c | 2 +- fs/reiserfs/journal.c | 4 ++-- fs/xfs/linux-2.6/xfs_aops.c | 2 +- include/linux/buffer_head.h | 8 ++++++-- 9 files changed, 17 insertions(+), 13 deletions(-) diff --git a/fs/buffer.c b/fs/buffer.c index 4dbe52948e8f..38653e36e225 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -1720,7 +1720,7 @@ static int __block_write_full_page(struct inode *inode, struct page *page, */ if (wbc->sync_mode != WB_SYNC_NONE || !wbc->nonblocking) { lock_buffer(bh); - } else if (test_set_buffer_locked(bh)) { + } else if (!trylock_buffer(bh)) { redirty_page_for_writepage(wbc, page); continue; } @@ -3000,7 +3000,7 @@ void ll_rw_block(int rw, int nr, struct buffer_head *bhs[]) if (rw == SWRITE || rw == SWRITE_SYNC) lock_buffer(bh); - else if (test_set_buffer_locked(bh)) + else if (!trylock_buffer(bh)) continue; if (rw == WRITE || rw == SWRITE || rw == SWRITE_SYNC) { diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c index 81a9ad7177ca..ae08c057e751 100644 --- a/fs/jbd/commit.c +++ b/fs/jbd/commit.c @@ -221,7 +221,7 @@ write_out_data: * blocking lock_buffer(). */ if (buffer_dirty(bh)) { - if (test_set_buffer_locked(bh)) { + if (!trylock_buffer(bh)) { BUFFER_TRACE(bh, "needs blocking lock"); spin_unlock(&journal->j_list_lock); /* Write out all data to prevent deadlocks */ diff --git a/fs/ntfs/aops.c b/fs/ntfs/aops.c index 00e9ccde8e42..b38f944f0667 100644 --- a/fs/ntfs/aops.c +++ b/fs/ntfs/aops.c @@ -1194,7 +1194,7 @@ lock_retry_remap: tbh = bhs[i]; if (!tbh) continue; - if (unlikely(test_set_buffer_locked(tbh))) + if (!trylock_buffer(tbh)) BUG(); /* The buffer dirty state is now irrelevant, just clean it. */ clear_buffer_dirty(tbh); diff --git a/fs/ntfs/compress.c b/fs/ntfs/compress.c index 33ff314cc507..9669541d0119 100644 --- a/fs/ntfs/compress.c +++ b/fs/ntfs/compress.c @@ -665,7 +665,7 @@ lock_retry_remap: for (i = 0; i < nr_bhs; i++) { struct buffer_head *tbh = bhs[i]; - if (unlikely(test_set_buffer_locked(tbh))) + if (!trylock_buffer(tbh)) continue; if (unlikely(buffer_uptodate(tbh))) { unlock_buffer(tbh); diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c index 790defb847e7..17d32ca6bc35 100644 --- a/fs/ntfs/mft.c +++ b/fs/ntfs/mft.c @@ -586,7 +586,7 @@ int ntfs_sync_mft_mirror(ntfs_volume *vol, const unsigned long mft_no, for (i_bhs = 0; i_bhs < nr_bhs; i_bhs++) { struct buffer_head *tbh = bhs[i_bhs]; - if (unlikely(test_set_buffer_locked(tbh))) + if (!trylock_buffer(tbh)) BUG(); BUG_ON(!buffer_uptodate(tbh)); clear_buffer_dirty(tbh); @@ -779,7 +779,7 @@ int write_mft_record_nolock(ntfs_inode *ni, MFT_RECORD *m, int sync) for (i_bhs = 0; i_bhs < nr_bhs; i_bhs++) { struct buffer_head *tbh = bhs[i_bhs]; - if (unlikely(test_set_buffer_locked(tbh))) + if (!trylock_buffer(tbh)) BUG(); BUG_ON(!buffer_uptodate(tbh)); clear_buffer_dirty(tbh); diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 192269698a8a..5699171212ae 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -2435,7 +2435,7 @@ static int reiserfs_write_full_page(struct page *page, if (wbc->sync_mode != WB_SYNC_NONE || !wbc->nonblocking) { lock_buffer(bh); } else { - if (test_set_buffer_locked(bh)) { + if (!trylock_buffer(bh)) { redirty_page_for_writepage(wbc, page); continue; } diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index ce2208b27118..c21df71943a6 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -855,7 +855,7 @@ static int write_ordered_buffers(spinlock_t * lock, jh = JH_ENTRY(list->next); bh = jh->bh; get_bh(bh); - if (test_set_buffer_locked(bh)) { + if (!trylock_buffer(bh)) { if (!buffer_dirty(bh)) { list_move(&jh->list, &tmp); goto loop_next; @@ -3871,7 +3871,7 @@ int reiserfs_prepare_for_journal(struct super_block *p_s_sb, { PROC_INFO_INC(p_s_sb, journal.prepare); - if (test_set_buffer_locked(bh)) { + if (!trylock_buffer(bh)) { if (!wait) return 0; lock_buffer(bh); diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c index fa73179233ad..fa47e43b8b41 100644 --- a/fs/xfs/linux-2.6/xfs_aops.c +++ b/fs/xfs/linux-2.6/xfs_aops.c @@ -1104,7 +1104,7 @@ xfs_page_state_convert( * that we are writing into for the first time. */ type = IOMAP_NEW; - if (!test_and_set_bit(BH_Lock, &bh->b_state)) { + if (trylock_buffer(bh)) { ASSERT(buffer_mapped(bh)); if (iomap_valid) all_bh = 1; diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index 50cfe8ceb478..eadaab44015f 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -115,7 +115,6 @@ BUFFER_FNS(Uptodate, uptodate) BUFFER_FNS(Dirty, dirty) TAS_BUFFER_FNS(Dirty, dirty) BUFFER_FNS(Lock, locked) -TAS_BUFFER_FNS(Lock, locked) BUFFER_FNS(Req, req) TAS_BUFFER_FNS(Req, req) BUFFER_FNS(Mapped, mapped) @@ -321,10 +320,15 @@ static inline void wait_on_buffer(struct buffer_head *bh) __wait_on_buffer(bh); } +static inline int trylock_buffer(struct buffer_head *bh) +{ + return likely(!test_and_set_bit(BH_Lock, &bh->b_state)); +} + static inline void lock_buffer(struct buffer_head *bh) { might_sleep(); - if (test_set_buffer_locked(bh)) + if (!trylock_buffer(bh)) __lock_buffer(bh); } -- cgit v1.2.3 From 378a2f090f7a478704a372a4869b8a9ac206234e Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Mon, 4 Aug 2008 22:31:03 -0700 Subject: net_sched: Add qdisc __NET_XMIT_STOLEN flag Patrick McHardy noticed: "The other problem that affects all qdiscs supporting actions is TC_ACT_QUEUED/TC_ACT_STOLEN getting mapped to NET_XMIT_SUCCESS even though the packet is not queued, corrupting upper qdiscs' qlen counters." and later explained: "The reason why it translates it at all seems to be to not increase the drops counter. Within a single qdisc this could be avoided by other means easily, upper qdiscs would still increase the counter when we return anything besides NET_XMIT_SUCCESS though. This means we need a new NET_XMIT return value to indicate this to the upper qdiscs. So I'd suggest to introduce NET_XMIT_STOLEN, return that to upper qdiscs and translate it to NET_XMIT_SUCCESS in dev_queue_xmit, similar to NET_XMIT_BYPASS." David Miller noticed: "Maybe these NET_XMIT_* values being passed around should be a set of bits. They could be composed of base meanings, combined with specific attributes. So you could say "NET_XMIT_DROP | __NET_XMIT_NO_DROP_COUNT" The attributes get masked out by the top-level ->enqueue() caller, such that the base meanings are the only thing that make their way up into the stack. If it's only about communication within the qdisc tree, let's simply code it that way." This patch is trying to realize these ideas. Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- include/linux/netdevice.h | 1 + include/net/sch_generic.h | 14 +++++++++++++- net/sched/sch_atm.c | 12 +++++++----- net/sched/sch_cbq.c | 23 +++++++++++++++-------- net/sched/sch_dsmark.c | 8 +++++--- net/sched/sch_hfsc.c | 8 +++++--- net/sched/sch_htb.c | 18 +++++++++++------- net/sched/sch_netem.c | 3 ++- net/sched/sch_prio.c | 8 +++++--- net/sched/sch_red.c | 2 +- net/sched/sch_sfq.c | 2 +- net/sched/sch_tbf.c | 3 ++- 12 files changed, 68 insertions(+), 34 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index ee583f642a9f..abbf5d52ec86 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -64,6 +64,7 @@ struct wireless_dev; #define NET_XMIT_BYPASS 4 /* packet does not leave via dequeue; (TC use only - dev_queue_xmit returns this as NET_XMIT_SUCCESS) */ +#define NET_XMIT_MASK 0xFFFF /* qdisc flags in net/sch_generic.h */ /* Backlog congestion levels */ #define NET_RX_SUCCESS 0 /* keep 'em coming, baby */ diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index c5bb13065051..f15b045a85e9 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -343,6 +343,18 @@ static inline unsigned int qdisc_pkt_len(struct sk_buff *skb) return qdisc_skb_cb(skb)->pkt_len; } +#ifdef CONFIG_NET_CLS_ACT +/* additional qdisc xmit flags */ +enum net_xmit_qdisc_t { + __NET_XMIT_STOLEN = 0x00010000, +}; + +#define net_xmit_drop_count(e) ((e) & __NET_XMIT_STOLEN ? 0 : 1) + +#else +#define net_xmit_drop_count(e) (1) +#endif + static inline int qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch) { #ifdef CONFIG_NET_SCHED @@ -355,7 +367,7 @@ static inline int qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch) static inline int qdisc_enqueue_root(struct sk_buff *skb, struct Qdisc *sch) { qdisc_skb_cb(skb)->pkt_len = skb->len; - return qdisc_enqueue(skb, sch); + return qdisc_enqueue(skb, sch) & NET_XMIT_MASK; } static inline int __qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch, diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c index 6b517b9dac5b..27dd773481bc 100644 --- a/net/sched/sch_atm.c +++ b/net/sched/sch_atm.c @@ -415,7 +415,7 @@ static int atm_tc_enqueue(struct sk_buff *skb, struct Qdisc *sch) case TC_ACT_QUEUED: case TC_ACT_STOLEN: kfree_skb(skb); - return NET_XMIT_SUCCESS; + return NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; case TC_ACT_SHOT: kfree_skb(skb); goto drop; @@ -432,9 +432,11 @@ static int atm_tc_enqueue(struct sk_buff *skb, struct Qdisc *sch) ret = qdisc_enqueue(skb, flow->q); if (ret != 0) { drop: __maybe_unused - sch->qstats.drops++; - if (flow) - flow->qstats.drops++; + if (net_xmit_drop_count(ret)) { + sch->qstats.drops++; + if (flow) + flow->qstats.drops++; + } return ret; } sch->bstats.bytes += qdisc_pkt_len(skb); @@ -530,7 +532,7 @@ static int atm_tc_requeue(struct sk_buff *skb, struct Qdisc *sch) if (!ret) { sch->q.qlen++; sch->qstats.requeues++; - } else { + } else if (net_xmit_drop_count(ret)) { sch->qstats.drops++; p->link.qstats.drops++; } diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index 14954bf4a683..765ae5659000 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -256,7 +256,7 @@ cbq_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr) switch (result) { case TC_ACT_QUEUED: case TC_ACT_STOLEN: - *qerr = NET_XMIT_SUCCESS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; case TC_ACT_SHOT: return NULL; case TC_ACT_RECLASSIFY: @@ -397,9 +397,11 @@ cbq_enqueue(struct sk_buff *skb, struct Qdisc *sch) return ret; } - sch->qstats.drops++; - cbq_mark_toplevel(q, cl); - cl->qstats.drops++; + if (net_xmit_drop_count(ret)) { + sch->qstats.drops++; + cbq_mark_toplevel(q, cl); + cl->qstats.drops++; + } return ret; } @@ -430,8 +432,10 @@ cbq_requeue(struct sk_buff *skb, struct Qdisc *sch) cbq_activate_class(cl); return 0; } - sch->qstats.drops++; - cl->qstats.drops++; + if (net_xmit_drop_count(ret)) { + sch->qstats.drops++; + cl->qstats.drops++; + } return ret; } @@ -664,13 +668,15 @@ static int cbq_reshape_fail(struct sk_buff *skb, struct Qdisc *child) q->rx_class = NULL; if (cl && (cl = cbq_reclassify(skb, cl)) != NULL) { + int ret; cbq_mark_toplevel(q, cl); q->rx_class = cl; cl->q->__parent = sch; - if (qdisc_enqueue(skb, cl->q) == 0) { + ret = qdisc_enqueue(skb, cl->q); + if (ret == NET_XMIT_SUCCESS) { sch->q.qlen++; sch->bstats.packets++; sch->bstats.bytes += qdisc_pkt_len(skb); @@ -678,7 +684,8 @@ static int cbq_reshape_fail(struct sk_buff *skb, struct Qdisc *child) cbq_activate_class(cl); return 0; } - sch->qstats.drops++; + if (net_xmit_drop_count(ret)) + sch->qstats.drops++; return 0; } diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c index a935676987e2..7170275d9f99 100644 --- a/net/sched/sch_dsmark.c +++ b/net/sched/sch_dsmark.c @@ -236,7 +236,7 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch) case TC_ACT_QUEUED: case TC_ACT_STOLEN: kfree_skb(skb); - return NET_XMIT_SUCCESS; + return NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; case TC_ACT_SHOT: goto drop; @@ -254,7 +254,8 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch) err = qdisc_enqueue(skb, p->q); if (err != NET_XMIT_SUCCESS) { - sch->qstats.drops++; + if (net_xmit_drop_count(err)) + sch->qstats.drops++; return err; } @@ -321,7 +322,8 @@ static int dsmark_requeue(struct sk_buff *skb, struct Qdisc *sch) err = p->q->ops->requeue(skb, p->q); if (err != NET_XMIT_SUCCESS) { - sch->qstats.drops++; + if (net_xmit_drop_count(err)) + sch->qstats.drops++; return err; } diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index 0ae7d19dcba8..5cf9ae716118 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1166,7 +1166,7 @@ hfsc_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr) switch (result) { case TC_ACT_QUEUED: case TC_ACT_STOLEN: - *qerr = NET_XMIT_SUCCESS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; case TC_ACT_SHOT: return NULL; } @@ -1586,8 +1586,10 @@ hfsc_enqueue(struct sk_buff *skb, struct Qdisc *sch) err = qdisc_enqueue(skb, cl->qdisc); if (unlikely(err != NET_XMIT_SUCCESS)) { - cl->qstats.drops++; - sch->qstats.drops++; + if (net_xmit_drop_count(err)) { + cl->qstats.drops++; + sch->qstats.drops++; + } return err; } diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 75a40951c4f2..538d79b489ae 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -221,7 +221,7 @@ static struct htb_class *htb_classify(struct sk_buff *skb, struct Qdisc *sch, switch (result) { case TC_ACT_QUEUED: case TC_ACT_STOLEN: - *qerr = NET_XMIT_SUCCESS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; case TC_ACT_SHOT: return NULL; } @@ -572,9 +572,11 @@ static int htb_enqueue(struct sk_buff *skb, struct Qdisc *sch) kfree_skb(skb); return ret; #endif - } else if (qdisc_enqueue(skb, cl->un.leaf.q) != NET_XMIT_SUCCESS) { - sch->qstats.drops++; - cl->qstats.drops++; + } else if ((ret = qdisc_enqueue(skb, cl->un.leaf.q)) != NET_XMIT_SUCCESS) { + if (net_xmit_drop_count(ret)) { + sch->qstats.drops++; + cl->qstats.drops++; + } return NET_XMIT_DROP; } else { cl->bstats.packets += @@ -615,10 +617,12 @@ static int htb_requeue(struct sk_buff *skb, struct Qdisc *sch) kfree_skb(skb); return ret; #endif - } else if (cl->un.leaf.q->ops->requeue(skb, cl->un.leaf.q) != + } else if ((ret = cl->un.leaf.q->ops->requeue(skb, cl->un.leaf.q)) != NET_XMIT_SUCCESS) { - sch->qstats.drops++; - cl->qstats.drops++; + if (net_xmit_drop_count(ret)) { + sch->qstats.drops++; + cl->qstats.drops++; + } return NET_XMIT_DROP; } else htb_activate(q, cl); diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index a59085700678..6cd6f2bc749e 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -240,8 +240,9 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch) sch->q.qlen++; sch->bstats.bytes += qdisc_pkt_len(skb); sch->bstats.packets++; - } else + } else if (net_xmit_drop_count(ret)) { sch->qstats.drops++; + } pr_debug("netem: enqueue ret %d\n", ret); return ret; diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c index f849243eb095..adb1a52b77d3 100644 --- a/net/sched/sch_prio.c +++ b/net/sched/sch_prio.c @@ -45,7 +45,7 @@ prio_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr) switch (err) { case TC_ACT_STOLEN: case TC_ACT_QUEUED: - *qerr = NET_XMIT_SUCCESS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; case TC_ACT_SHOT: return NULL; } @@ -88,7 +88,8 @@ prio_enqueue(struct sk_buff *skb, struct Qdisc *sch) sch->q.qlen++; return NET_XMIT_SUCCESS; } - sch->qstats.drops++; + if (net_xmit_drop_count(ret)) + sch->qstats.drops++; return ret; } @@ -114,7 +115,8 @@ prio_requeue(struct sk_buff *skb, struct Qdisc* sch) sch->qstats.requeues++; return 0; } - sch->qstats.drops++; + if (net_xmit_drop_count(ret)) + sch->qstats.drops++; return NET_XMIT_DROP; } diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c index 3f2d1d7f3bbd..5da05839e225 100644 --- a/net/sched/sch_red.c +++ b/net/sched/sch_red.c @@ -97,7 +97,7 @@ static int red_enqueue(struct sk_buff *skb, struct Qdisc* sch) sch->bstats.bytes += qdisc_pkt_len(skb); sch->bstats.packets++; sch->q.qlen++; - } else { + } else if (net_xmit_drop_count(ret)) { q->stats.pdrop++; sch->qstats.drops++; } diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c index 8589da666568..3a456e1b829a 100644 --- a/net/sched/sch_sfq.c +++ b/net/sched/sch_sfq.c @@ -178,7 +178,7 @@ static unsigned int sfq_classify(struct sk_buff *skb, struct Qdisc *sch, switch (result) { case TC_ACT_STOLEN: case TC_ACT_QUEUED: - *qerr = NET_XMIT_SUCCESS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; case TC_ACT_SHOT: return 0; } diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c index b296672f7632..7d3b7ff3bf07 100644 --- a/net/sched/sch_tbf.c +++ b/net/sched/sch_tbf.c @@ -135,7 +135,8 @@ static int tbf_enqueue(struct sk_buff *skb, struct Qdisc* sch) ret = qdisc_enqueue(skb, q->qdisc); if (ret != 0) { - sch->qstats.drops++; + if (net_xmit_drop_count(ret)) + sch->qstats.drops++; return ret; } -- cgit v1.2.3 From c27f339af90bb874a7a9c680b17abfd32d4a727b Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Mon, 4 Aug 2008 22:39:11 -0700 Subject: net_sched: Add qdisc __NET_XMIT_BYPASS flag Patrick McHardy noticed that it would be nice to handle NET_XMIT_BYPASS by NET_XMIT_SUCCESS with an internal qdisc flag __NET_XMIT_BYPASS and to remove the mapping from dev_queue_xmit(). David Miller spotted a serious bug in the first version of this patch. Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- include/net/sch_generic.h | 6 +++--- net/core/dev.c | 1 - net/sched/sch_atm.c | 2 +- net/sched/sch_cbq.c | 4 ++-- net/sched/sch_dsmark.c | 2 +- net/sched/sch_hfsc.c | 4 ++-- net/sched/sch_htb.c | 6 +++--- net/sched/sch_netem.c | 2 +- net/sched/sch_prio.c | 6 +++--- net/sched/sch_sfq.c | 6 +++--- 10 files changed, 19 insertions(+), 20 deletions(-) diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index f15b045a85e9..a7abfda3e447 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -343,14 +343,14 @@ static inline unsigned int qdisc_pkt_len(struct sk_buff *skb) return qdisc_skb_cb(skb)->pkt_len; } -#ifdef CONFIG_NET_CLS_ACT -/* additional qdisc xmit flags */ +/* additional qdisc xmit flags (NET_XMIT_MASK in linux/netdevice.h) */ enum net_xmit_qdisc_t { __NET_XMIT_STOLEN = 0x00010000, + __NET_XMIT_BYPASS = 0x00020000, }; +#ifdef CONFIG_NET_CLS_ACT #define net_xmit_drop_count(e) ((e) & __NET_XMIT_STOLEN ? 0 : 1) - #else #define net_xmit_drop_count(e) (1) #endif diff --git a/net/core/dev.c b/net/core/dev.c index fc6c9881eca8..01993ad74e76 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1805,7 +1805,6 @@ gso: spin_unlock(root_lock); - rc = rc == NET_XMIT_BYPASS ? NET_XMIT_SUCCESS : rc; goto out; } diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c index 27dd773481bc..43d37256c15e 100644 --- a/net/sched/sch_atm.c +++ b/net/sched/sch_atm.c @@ -457,7 +457,7 @@ drop: __maybe_unused return 0; } tasklet_schedule(&p->task); - return NET_XMIT_BYPASS; + return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; } /* diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index 765ae5659000..4e261ce62f48 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -230,7 +230,7 @@ cbq_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr) (cl = cbq_class_lookup(q, prio)) != NULL) return cl; - *qerr = NET_XMIT_BYPASS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; for (;;) { int result = 0; defmap = head->defaults; @@ -377,7 +377,7 @@ cbq_enqueue(struct sk_buff *skb, struct Qdisc *sch) q->rx_class = cl; #endif if (cl == NULL) { - if (ret == NET_XMIT_BYPASS) + if (ret & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return ret; diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c index 7170275d9f99..edd1298f85f6 100644 --- a/net/sched/sch_dsmark.c +++ b/net/sched/sch_dsmark.c @@ -268,7 +268,7 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch) drop: kfree_skb(skb); sch->qstats.drops++; - return NET_XMIT_BYPASS; + return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; } static struct sk_buff *dsmark_dequeue(struct Qdisc *sch) diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index 5cf9ae716118..c2b8d9cce3d2 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1159,7 +1159,7 @@ hfsc_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr) if (cl->level == 0) return cl; - *qerr = NET_XMIT_BYPASS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; tcf = q->root.filter_list; while (tcf && (result = tc_classify(skb, tcf, &res)) >= 0) { #ifdef CONFIG_NET_CLS_ACT @@ -1578,7 +1578,7 @@ hfsc_enqueue(struct sk_buff *skb, struct Qdisc *sch) cl = hfsc_classify(skb, sch, &err); if (cl == NULL) { - if (err == NET_XMIT_BYPASS) + if (err & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return err; diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 538d79b489ae..be35422711a3 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -214,7 +214,7 @@ static struct htb_class *htb_classify(struct sk_buff *skb, struct Qdisc *sch, if ((cl = htb_find(skb->priority, sch)) != NULL && cl->level == 0) return cl; - *qerr = NET_XMIT_BYPASS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; tcf = q->filter_list; while (tcf && (result = tc_classify(skb, tcf, &res)) >= 0) { #ifdef CONFIG_NET_CLS_ACT @@ -567,7 +567,7 @@ static int htb_enqueue(struct sk_buff *skb, struct Qdisc *sch) } #ifdef CONFIG_NET_CLS_ACT } else if (!cl) { - if (ret == NET_XMIT_BYPASS) + if (ret & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return ret; @@ -612,7 +612,7 @@ static int htb_requeue(struct sk_buff *skb, struct Qdisc *sch) } #ifdef CONFIG_NET_CLS_ACT } else if (!cl) { - if (ret == NET_XMIT_BYPASS) + if (ret & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return ret; diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index 6cd6f2bc749e..fb0294d0b55e 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -176,7 +176,7 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch) if (count == 0) { sch->qstats.drops++; kfree_skb(skb); - return NET_XMIT_BYPASS; + return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; } skb_orphan(skb); diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c index adb1a52b77d3..eac197610edf 100644 --- a/net/sched/sch_prio.c +++ b/net/sched/sch_prio.c @@ -38,7 +38,7 @@ prio_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr) struct tcf_result res; int err; - *qerr = NET_XMIT_BYPASS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; if (TC_H_MAJ(skb->priority) != sch->handle) { err = tc_classify(skb, q->filter_list, &res); #ifdef CONFIG_NET_CLS_ACT @@ -74,7 +74,7 @@ prio_enqueue(struct sk_buff *skb, struct Qdisc *sch) #ifdef CONFIG_NET_CLS_ACT if (qdisc == NULL) { - if (ret == NET_XMIT_BYPASS) + if (ret & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return ret; @@ -103,7 +103,7 @@ prio_requeue(struct sk_buff *skb, struct Qdisc* sch) qdisc = prio_classify(skb, sch, &ret); #ifdef CONFIG_NET_CLS_ACT if (qdisc == NULL) { - if (ret == NET_XMIT_BYPASS) + if (ret & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return ret; diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c index 3a456e1b829a..6e041d10dbdb 100644 --- a/net/sched/sch_sfq.c +++ b/net/sched/sch_sfq.c @@ -171,7 +171,7 @@ static unsigned int sfq_classify(struct sk_buff *skb, struct Qdisc *sch, if (!q->filter_list) return sfq_hash(q, skb) + 1; - *qerr = NET_XMIT_BYPASS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; result = tc_classify(skb, q->filter_list, &res); if (result >= 0) { #ifdef CONFIG_NET_CLS_ACT @@ -285,7 +285,7 @@ sfq_enqueue(struct sk_buff *skb, struct Qdisc *sch) hash = sfq_classify(skb, sch, &ret); if (hash == 0) { - if (ret == NET_XMIT_BYPASS) + if (ret & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return ret; @@ -339,7 +339,7 @@ sfq_requeue(struct sk_buff *skb, struct Qdisc *sch) hash = sfq_classify(skb, sch, &ret); if (hash == 0) { - if (ret == NET_XMIT_BYPASS) + if (ret & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return ret; -- cgit v1.2.3 From 19052c0e85a3e9d3b7d190b29fcdbf0e6c105381 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 5 Aug 2008 15:54:13 +1000 Subject: Make writes to md/safe_mode_delay immediately effective. If we reduce the 'safe_mode_delay', it could still wait for the old delay to completely expire before doing anything about safe_mode. Thus the effect if the change is delayed. To make the effect more immediate, run the timeout function immediately if the delay was reduced. This may cause it to run slightly earlier that required, but that is the safer option. Signed-off-by: NeilBrown --- drivers/md/md.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/md/md.c b/drivers/md/md.c index c7aae66c6f9b..48afe4f7ad4c 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2393,6 +2393,8 @@ static void analyze_sbs(mddev_t * mddev) } +static void md_safemode_timeout(unsigned long data); + static ssize_t safe_delay_show(mddev_t *mddev, char *page) { @@ -2432,9 +2434,12 @@ safe_delay_store(mddev_t *mddev, const char *cbuf, size_t len) if (msec == 0) mddev->safemode_delay = 0; else { + unsigned long old_delay = mddev->safemode_delay; mddev->safemode_delay = (msec*HZ)/1000; if (mddev->safemode_delay == 0) mddev->safemode_delay = 1; + if (mddev->safemode_delay < old_delay) + md_safemode_timeout((unsigned long)mddev); } return len; } -- cgit v1.2.3 From 2b25000bf5157c28d8591f03f0575248a8cbd900 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 5 Aug 2008 15:54:13 +1000 Subject: Restore force switch of md array to readonly at reboot time. A recent patch allowed do_md_stop to know whether it was being called via an ioctl or not, and thus where to allow for an extra open file descriptor when checking if it is in use. This broke then switch to readonly performed by the shutdown notifier, which needs to work even when the array is still (apparently) active (as md doesn't get told when the filesystem becomes readonly). So restore this feature by pretending that there can be lots of file descriptors open, but we still want do_md_stop to switch to readonly. Signed-off-by: NeilBrown --- drivers/md/md.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 48afe4f7ad4c..8d11cd1a0d8b 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6237,7 +6237,11 @@ static int md_notify_reboot(struct notifier_block *this, for_each_mddev(mddev, tmp) if (mddev_trylock(mddev)) { - do_md_stop (mddev, 1, 0); + /* Force a switch to readonly even array + * appears to still be in use. Hence + * the '100'. + */ + do_md_stop (mddev, 1, 100); mddev_unlock(mddev); } /* -- cgit v1.2.3 From dba034eef2456d2a9f9a76806846c97acf6c3ad1 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 5 Aug 2008 15:54:13 +1000 Subject: Fail safely when trying to grow an array with a write-intent bitmap. We cannot currently change the size of a write-intent bitmap. So if we change the size of an array which has such a bitmap, it tries to set bits beyond the end of the bitmap. For now, simply reject any request to change the size of an array which has a bitmap. mdadm can remove the bitmap and add a new one after the array has changed size. Signed-off-by: NeilBrown --- drivers/md/md.c | 5 +++++ drivers/md/raid5.c | 3 +++ 2 files changed, 8 insertions(+) diff --git a/drivers/md/md.c b/drivers/md/md.c index 8d11cd1a0d8b..6eb95451f161 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4639,6 +4639,11 @@ static int update_size(mddev_t *mddev, sector_t num_sectors) */ if (mddev->sync_thread) return -EBUSY; + if (mddev->bitmap) + /* Sorry, cannot grow a bitmap yet, just remove it, + * grow, and re-add. + */ + return -EBUSY; rdev_for_each(rdev, tmp, mddev) { sector_t avail; avail = rdev->size * 2; diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 40e939675657..17e0953c3c06 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4446,6 +4446,9 @@ static int raid5_check_reshape(mddev_t *mddev) return -EINVAL; /* Cannot shrink array or change level yet */ if (mddev->delta_disks == 0) return 0; /* nothing to do */ + if (mddev->bitmap) + /* Cannot grow a bitmap yet */ + return -EBUSY; /* Can only proceed if there are plenty of stripe_heads. * We need a minimum of one full stripe,, and for sensible progress -- cgit v1.2.3 From ac4090d24c6a26211bc4523d920376e054d4f3f8 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 5 Aug 2008 15:54:13 +1000 Subject: Don't let a blocked_rdev interfere with read request in raid5/6 When we have externally managed metadata, we need to mark a failed device as 'Blocked' and not allow any writes until that device have been marked as faulty in the metadata and the Blocked flag has been removed. However it is perfectly OK to allow read requests when there is a Blocked device, and with a readonly array, there may not be any metadata-handler watching for blocked devices. So in raid5/raid6 only allow a Blocked device to interfere with Write request or resync. Read requests go through untouched. raid1 and raid10 already differentiate between read and write properly. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 17e0953c3c06..224de022e7c5 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2568,10 +2568,10 @@ static bool handle_stripe5(struct stripe_head *sh) if (dev->written) s.written++; rdev = rcu_dereference(conf->disks[i].rdev); - if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) { + if (blocked_rdev == NULL && + rdev && unlikely(test_bit(Blocked, &rdev->flags))) { blocked_rdev = rdev; atomic_inc(&rdev->nr_pending); - break; } if (!rdev || !test_bit(In_sync, &rdev->flags)) { /* The ReadError flag will just be confusing now */ @@ -2588,8 +2588,14 @@ static bool handle_stripe5(struct stripe_head *sh) rcu_read_unlock(); if (unlikely(blocked_rdev)) { - set_bit(STRIPE_HANDLE, &sh->state); - goto unlock; + if (s.syncing || s.expanding || s.expanded || + s.to_write || s.written) { + set_bit(STRIPE_HANDLE, &sh->state); + goto unlock; + } + /* There is nothing for the blocked_rdev to block */ + rdev_dec_pending(blocked_rdev, conf->mddev); + blocked_rdev = NULL; } if (s.to_fill && !test_bit(STRIPE_BIOFILL_RUN, &sh->state)) { @@ -2832,10 +2838,10 @@ static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page) if (dev->written) s.written++; rdev = rcu_dereference(conf->disks[i].rdev); - if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) { + if (blocked_rdev == NULL && + rdev && unlikely(test_bit(Blocked, &rdev->flags))) { blocked_rdev = rdev; atomic_inc(&rdev->nr_pending); - break; } if (!rdev || !test_bit(In_sync, &rdev->flags)) { /* The ReadError flag will just be confusing now */ @@ -2853,9 +2859,16 @@ static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page) rcu_read_unlock(); if (unlikely(blocked_rdev)) { - set_bit(STRIPE_HANDLE, &sh->state); - goto unlock; + if (s.syncing || s.expanding || s.expanded || + s.to_write || s.written) { + set_bit(STRIPE_HANDLE, &sh->state); + goto unlock; + } + /* There is nothing for the blocked_rdev to block */ + rdev_dec_pending(blocked_rdev, conf->mddev); + blocked_rdev = NULL; } + pr_debug("locked=%d uptodate=%d to_read=%d" " to_write=%d failed=%d failed_num=%d,%d\n", s.locked, s.uptodate, s.to_read, s.to_write, s.failed, -- cgit v1.2.3 From c89a8eee61540df04fc83f32f51ef0f46ec018b1 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 5 Aug 2008 15:54:13 +1000 Subject: Allow faulty devices to be removed from a readonly array. Removing faulty devices from an array is a two stage process. First the device is moved from being a part of the active array to being similar to a spare device. Then it can be removed by a request from user space. The first step is currently not performed for read-only arrays, so the second step can never succeed. So allow readonly arrays to remove failed devices (which aren't blocked). Signed-off-by: NeilBrown --- drivers/md/md.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 6eb95451f161..25b893ec562e 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6003,7 +6003,7 @@ static int remove_and_add_spares(mddev_t *mddev) } } - if (mddev->degraded) { + if (mddev->degraded && ! mddev->ro) { rdev_for_each(rdev, rtmp, mddev) { if (rdev->raid_disk >= 0 && !test_bit(In_sync, &rdev->flags) && @@ -6077,6 +6077,8 @@ void md_check_recovery(mddev_t *mddev) flush_signals(current); } + if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) + return; if ( ! ( (mddev->flags && !mddev->external) || test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) || @@ -6090,6 +6092,15 @@ void md_check_recovery(mddev_t *mddev) if (mddev_trylock(mddev)) { int spares = 0; + if (mddev->ro) { + /* Only thing we do on a ro array is remove + * failed devices. + */ + remove_and_add_spares(mddev); + clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery); + goto unlock; + } + if (!mddev->external) { int did_change = 0; spin_lock_irq(&mddev->write_lock); -- cgit v1.2.3 From 0310fa216decc3ecfab41f327638fa48a81f3735 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 5 Aug 2008 15:54:14 +1000 Subject: Allow raid10 resync to happening in larger chunks. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The raid10 resync/recovery code currently limits the amount of in-flight resync IO to 2Meg. This was copied from raid1 where it seems quite adequate. However for raid10, some layouts require a bit of seeking to perform a resync, and allowing a larger buffer size means that the seeking can be significantly reduced. There is probably no real need to limit the amount of in-flight IO at all. Any shortage of memory will naturally reduce the amount of buffer space available down to a set minimum, and any concurrent normal IO will quickly cause resync IO to back off. The only problem would be that normal IO has to wait for all resync IO to finish, so a very large amount of resync IO could cause unpleasant latency when normal IO starts up. So: increase RESYNC_DEPTH to allow 32Meg of buffer (if memory is available) which seems to be a good amount. Also reduce the amount of memory reserved as there is no need to keep 2Meg just for resync if memory is tight. Thanks to Keld for the suggestion. Cc: Keld Jørn Simonsen Signed-off-by: NeilBrown --- drivers/md/raid10.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index d41bebb6da0f..e34cd0e62473 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -76,11 +76,13 @@ static void r10bio_pool_free(void *r10_bio, void *data) kfree(r10_bio); } +/* Maximum size of each resync request */ #define RESYNC_BLOCK_SIZE (64*1024) -//#define RESYNC_BLOCK_SIZE PAGE_SIZE -#define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9) #define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE) -#define RESYNC_WINDOW (2048*1024) +/* amount of memory to reserve for resync requests */ +#define RESYNC_WINDOW (1024*1024) +/* maximum number of concurrent requests, memory permitting */ +#define RESYNC_DEPTH (32*1024*1024/RESYNC_BLOCK_SIZE) /* * When performing a resync, we need to read and compare, so @@ -690,7 +692,6 @@ static int flush_pending_writes(conf_t *conf) * there is no normal IO happeing. It must arrange to call * lower_barrier when the particular background IO completes. */ -#define RESYNC_DEPTH 32 static void raise_barrier(conf_t *conf, int force) { -- cgit v1.2.3 From cc6533e98a7f3cb7fce9d740da49195c7aa523a4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 23:04:08 -0700 Subject: net: Kill plain NET_XMIT_BYPASS. dst_input() was doing something completely absurd, looping on skb->dst->input() if NET_XMIT_BYPASS was seen, but these functions never return such an error. And as a result plain ole' NET_XMIT_BYPASS has no more references and can be completely killed off. Signed-off-by: David S. Miller --- include/linux/netdevice.h | 3 --- include/net/dst.h | 12 +----------- 2 files changed, 1 insertion(+), 14 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index abbf5d52ec86..488c56e649b5 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -61,9 +61,6 @@ struct wireless_dev; #define NET_XMIT_DROP 1 /* skb dropped */ #define NET_XMIT_CN 2 /* congestion notification */ #define NET_XMIT_POLICED 3 /* skb is shot by police */ -#define NET_XMIT_BYPASS 4 /* packet does not leave via dequeue; - (TC use only - dev_queue_xmit - returns this as NET_XMIT_SUCCESS) */ #define NET_XMIT_MASK 0xFFFF /* qdisc flags in net/sch_generic.h */ /* Backlog congestion levels */ diff --git a/include/net/dst.h b/include/net/dst.h index c5c318a628f8..8a8b71e5f3f1 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -252,17 +252,7 @@ static inline int dst_output(struct sk_buff *skb) /* Input packet from network to transport. */ static inline int dst_input(struct sk_buff *skb) { - int err; - - for (;;) { - err = skb->dst->input(skb); - - if (likely(err == 0)) - return err; - /* Oh, Jamal... Seems, I will not forgive you this mess. :-) */ - if (unlikely(err != NET_XMIT_BYPASS)) - return err; - } + return skb->dst->input(skb); } static inline struct dst_entry *dst_check(struct dst_entry *dst, u32 cookie) -- cgit v1.2.3 From 2f751b67a8be698cec52f786910ef4f0beffe9a7 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 4 Aug 2008 23:17:34 -0700 Subject: tg3: Fix 'scheduling while atomic' errors This patch fixes the 'scheduling while atomic' errors introduced by commit 12dac0756d357325b107fe6ec24921ec38661839 ("tg3: adapt tg3 to use reworked PCI PM code"). The first hunk of the patch removes an unnecessary tg3_set_power_state() call. The chip will already be in the D0 state either due to a chip reset or through a previous call to tg3_set_power_state(). The second hunk of the patch moves the tg3_set_power_state() call outside the critical section guarded by tg3_full_lock() and tg3_full_unlock() functions. The power state of the device is and should be outside the lock's domain and all other tg3_set_power_state() calls support this. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 26aa37aa531f..d2439b85a790 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7687,21 +7687,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) */ static int tg3_init_hw(struct tg3 *tp, int reset_phy) { - int err; - - /* Force the chip into D0. */ - err = tg3_set_power_state(tp, PCI_D0); - if (err) - goto out; - tg3_switch_clocks(tp); tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0); - err = tg3_reset_hw(tp, reset_phy); - -out: - return err; + return tg3_reset_hw(tp, reset_phy); } #define TG3_STAT_ADD32(PSTAT, REG) \ @@ -8016,13 +8006,11 @@ static int tg3_open(struct net_device *dev) netif_carrier_off(tp->dev); - tg3_full_lock(tp, 0); - err = tg3_set_power_state(tp, PCI_D0); - if (err) { - tg3_full_unlock(tp); + if (err) return err; - } + + tg3_full_lock(tp, 0); tg3_disable_ints(tp); tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE; -- cgit v1.2.3 From 5595cffc8248e4672c5803547445e85e4053c8fc Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Tue, 5 Aug 2008 09:28:47 +0300 Subject: SLUB: dynamic per-cache MIN_PARTIAL This patch changes the static MIN_PARTIAL to a dynamic per-cache ->min_partial value that is calculated from object size. The bigger the object size, the more pages we keep on the partial list. I tested SLAB, SLUB, and SLUB with this patch on Jens Axboe's 'netio' example script of the fio benchmarking tool. The script stresses the networking subsystem which should also give a fairly good beating of kmalloc() et al. To run the test yourself, first clone the fio repository: git clone git://git.kernel.dk/fio.git and then run the following command n times on your machine: time ./fio examples/netio The results on my 2-way 64-bit x86 machine are as follows: [ the minimum, maximum, and average are captured from 50 individual runs ] real time (seconds) min max avg sd SLAB 22.76 23.38 22.98 0.17 SLUB 22.80 25.78 23.46 0.72 SLUB (dynamic) 22.74 23.54 23.00 0.20 sys time (seconds) min max avg sd SLAB 6.90 8.28 7.70 0.28 SLUB 7.42 16.95 8.89 2.28 SLUB (dynamic) 7.17 8.64 7.73 0.29 user time (seconds) min max avg sd SLAB 36.89 38.11 37.50 0.29 SLUB 30.85 37.99 37.06 1.67 SLUB (dynamic) 36.75 38.07 37.59 0.32 As you can see from the above numbers, this patch brings SLUB to the same level as SLAB for this particular workload fixing a ~2% regression. I'd expect this change to help similar workloads that allocate a lot of objects that are close to the size of a page. Cc: Matthew Wilcox Cc: Andrew Morton Acked-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slub_def.h | 1 + mm/slub.c | 26 +++++++++++++++++++------- 2 files changed, 20 insertions(+), 7 deletions(-) diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 5bad61a93f65..2f5c16b1aacd 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -46,6 +46,7 @@ struct kmem_cache_cpu { struct kmem_cache_node { spinlock_t list_lock; /* Protect partial list and nr_partial */ unsigned long nr_partial; + unsigned long min_partial; struct list_head partial; #ifdef CONFIG_SLUB_DEBUG atomic_long_t nr_slabs; diff --git a/mm/slub.c b/mm/slub.c index c26d4c36fba9..4f5b96149458 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1329,7 +1329,7 @@ static struct page *get_any_partial(struct kmem_cache *s, gfp_t flags) n = get_node(s, zone_to_nid(zone)); if (n && cpuset_zone_allowed_hardwall(zone, flags) && - n->nr_partial > MIN_PARTIAL) { + n->nr_partial > n->min_partial) { page = get_partial_node(n); if (page) return page; @@ -1381,7 +1381,7 @@ static void unfreeze_slab(struct kmem_cache *s, struct page *page, int tail) slab_unlock(page); } else { stat(c, DEACTIVATE_EMPTY); - if (n->nr_partial < MIN_PARTIAL) { + if (n->nr_partial < n->min_partial) { /* * Adding an empty slab to the partial slabs in order * to avoid page allocator overhead. This slab needs @@ -1913,9 +1913,21 @@ static void init_kmem_cache_cpu(struct kmem_cache *s, #endif } -static void init_kmem_cache_node(struct kmem_cache_node *n) +static void +init_kmem_cache_node(struct kmem_cache_node *n, struct kmem_cache *s) { n->nr_partial = 0; + + /* + * The larger the object size is, the more pages we want on the partial + * list to avoid pounding the page allocator excessively. + */ + n->min_partial = ilog2(s->size); + if (n->min_partial < MIN_PARTIAL) + n->min_partial = MIN_PARTIAL; + else if (n->min_partial > MAX_PARTIAL) + n->min_partial = MAX_PARTIAL; + spin_lock_init(&n->list_lock); INIT_LIST_HEAD(&n->partial); #ifdef CONFIG_SLUB_DEBUG @@ -2087,7 +2099,7 @@ static struct kmem_cache_node *early_kmem_cache_node_alloc(gfp_t gfpflags, init_object(kmalloc_caches, n, 1); init_tracking(kmalloc_caches, n); #endif - init_kmem_cache_node(n); + init_kmem_cache_node(n, kmalloc_caches); inc_slabs_node(kmalloc_caches, node, page->objects); /* @@ -2144,7 +2156,7 @@ static int init_kmem_cache_nodes(struct kmem_cache *s, gfp_t gfpflags) } s->node[node] = n; - init_kmem_cache_node(n); + init_kmem_cache_node(n, s); } return 1; } @@ -2155,7 +2167,7 @@ static void free_kmem_cache_nodes(struct kmem_cache *s) static int init_kmem_cache_nodes(struct kmem_cache *s, gfp_t gfpflags) { - init_kmem_cache_node(&s->local_node); + init_kmem_cache_node(&s->local_node, s); return 1; } #endif @@ -2889,7 +2901,7 @@ static int slab_mem_going_online_callback(void *arg) ret = -ENOMEM; goto out; } - init_kmem_cache_node(n); + init_kmem_cache_node(n, s); s->node[nid] = n; } out: -- cgit v1.2.3 From 95c3e8bfcdea8676e2d4d61910c379f4502049bf Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Tue, 5 Aug 2008 01:19:50 -0700 Subject: ipv4: remove unused field in struct flowi (include/net/flow.h). This patch removes an unused field (flags) from struct flowi; it seems that this "flags" field was used once in the past for multipath routing with FLOWI_FLAG_MULTIPATHOLDROUTE flag (which does no longer exist); however, the "flags" field of struct flowi is not used anymore. Signed-off-by: Rami Rosen Signed-off-by: David S. Miller --- include/net/flow.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/net/flow.h b/include/net/flow.h index ad16e0076c89..228b2477ceec 100644 --- a/include/net/flow.h +++ b/include/net/flow.h @@ -47,7 +47,6 @@ struct flowi { #define fl4_scope nl_u.ip4_u.scope __u8 proto; - __u8 flags; union { struct { __be16 sport; -- cgit v1.2.3 From ad619800e4e034cad44299b2a22df9eebb043ac3 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Tue, 5 Aug 2008 01:21:22 -0700 Subject: bridge: fix compile warning in net/bridge/br_netfilter.c This patch fixes the following warning due to incompatible pointer assignment: net/bridge/br_netfilter.c: In function 'br_netfilter_rtable_init': net/bridge/br_netfilter.c:116: warning: assignment from incompatible pointer type This warning is due to commit 4adf0af6818f3ea52421dc0bae836cfaf20ef72a from July 30 (send correct MTU value in PMTU (revised)). Signed-off-by: Rami Rosen Signed-off-by: David S. Miller --- net/bridge/br_netfilter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index 6e280a8a31ee..6a9a6cd74b1e 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -113,7 +113,7 @@ void br_netfilter_rtable_init(struct net_bridge *br) struct rtable *rt = &br->fake_rtable; atomic_set(&rt->u.dst.__refcnt, 1); - rt->u.dst.dev = &br->dev; + rt->u.dst.dev = br->dev; rt->u.dst.path = &rt->u.dst; rt->u.dst.metrics[RTAX_MTU - 1] = 1500; rt->u.dst.flags = DST_NOXFRM; -- cgit v1.2.3 From 0f0625d895bc5b3c3d7352486a94e5a75f10fd35 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 5 Aug 2008 17:10:58 +0800 Subject: Blackfin arch: remove useless mtd defines in uClinux dont bother protecting the mtd defines as anything that incorrectly uses it will get an error during link time anyways ... this prevents large pointless rebuilds of most files whenever the uclinux mtd map changes state Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- include/asm-blackfin/bfin-global.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h index 320aa5e167e9..9fbbee61f982 100644 --- a/include/asm-blackfin/bfin-global.h +++ b/include/asm-blackfin/bfin-global.h @@ -122,9 +122,8 @@ extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[], _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[], _ebss_l2[], _l2_lma_start[]; -#ifdef CONFIG_MTD_UCLINUX +/* only used when CONFIG_MTD_UCLINUX */ extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size; -#endif #endif -- cgit v1.2.3 From 5400c5aa2de41501be7529831c9df36c729bf371 Mon Sep 17 00:00:00 2001 From: Jie Zhang Date: Tue, 5 Aug 2008 17:33:38 +0800 Subject: Blackfin arch: Fix bug - This change eliminates impact on application debugging Signed-off-by: Jie Zhang Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/entry.S | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index eceb484d90f9..3db2f4df261b 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -158,6 +158,7 @@ ENTRY(_ex_single_step) cc = r7 == r6; if cc jump _bfin_return_from_exception; +#ifdef CONFIG_KGDB /* Don't do single step in hardware exception handler */ p5.l = lo(IPEND); p5.h = hi(IPEND); @@ -165,7 +166,6 @@ ENTRY(_ex_single_step) cc = bittst(r6, 5); if cc jump _bfin_return_from_exception; -#ifdef CONFIG_KGDB /* skip single step if current interrupt priority is higher than * that of the first instruction, from which gdb starts single step */ r6 >>= 6; @@ -191,12 +191,22 @@ ENTRY(_ex_single_step) #endif /* If we were in user mode, do the single step normally. */ + p5.l = lo(IPEND); + p5.h = hi(IPEND); r6 = [p5]; r7 = 0xffe0 (z); r7 = r7 & r6; cc = r7 == 0; - if cc jump 1f; + if !cc jump 1f; + /* Single stepping only a single instruction, so clear the trace + * bit here. */ + r7 = syscfg; + bitclr (r7, 0); + syscfg = R7; + jump _ex_trap_c; + +1: /* * We were in an interrupt handler. By convention, all of them save * SYSCFG with their first instruction, so by checking whether our @@ -224,15 +234,11 @@ ENTRY(_ex_single_step) cc = R7 == R6; if !cc jump _bfin_return_from_exception; -1: - /* Single stepping only a single instruction, so clear the trace - * bit here. */ r7 = syscfg; bitclr (r7, 0); syscfg = R7; - jump _ex_trap_c; - + /* Fall through to _bfin_return_from_exception. */ ENDPROC(_ex_single_step) ENTRY(_bfin_return_from_exception) -- cgit v1.2.3 From 4a88d0ce494034fbb8dd0076d80e71b38abf5748 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 5 Aug 2008 17:38:41 +0800 Subject: Blackfin arch: Functional power management support Merge VR Regulator Hibernate wakeups into set_irq_wake for internal interrupts. Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 36 ------------------------ arch/blackfin/mach-common/ints-priority.c | 46 +++++++++++++++++++++++++++++-- arch/blackfin/mach-common/pm.c | 18 +----------- include/asm-blackfin/bfin-global.h | 1 + 4 files changed, 45 insertions(+), 56 deletions(-) diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 5a097c46bc46..cc2add7e39e7 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -933,13 +933,6 @@ endchoice comment "Possible Suspend Mem / Hibernate Wake-Up Sources" depends on PM -config PM_BFIN_WAKE_RTC - bool "Allow Wake-Up from RESET and on-chip RTC" - depends on PM - default n - help - Enable RTC Wake-Up (Voltage Regulator Power-Up) - config PM_BFIN_WAKE_PH6 bool "Allow Wake-Up from on-chip PHY or PH6 GP" depends on PM && (BF52x || BF534 || BF536 || BF537) @@ -947,41 +940,12 @@ config PM_BFIN_WAKE_PH6 help Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up) -config PM_BFIN_WAKE_CAN - bool "Allow Wake-Up from on-chip CAN0/1" - depends on PM && (BF54x || BF534 || BF536 || BF537) - default n - help - Enable CAN0/1 Wake-Up (Voltage Regulator Power-Up) - config PM_BFIN_WAKE_GP bool "Allow Wake-Up from GPIOs" depends on PM && BF54x default n help Enable General-Purpose Wake-Up (Voltage Regulator Power-Up) - -config PM_BFIN_WAKE_USB - bool "Allow Wake-Up from on-chip USB" - depends on PM && (BF54x || BF52x) - default n - help - Enable USB Wake-Up (Voltage Regulator Power-Up) - -config PM_BFIN_WAKE_KEYPAD - bool "Allow Wake-Up from on-chip Keypad" - depends on PM && BF54x - default n - help - Enable Keypad Wake-Up (Voltage Regulator Power-Up) - -config PM_BFIN_WAKE_ROTARY - bool "Allow Wake-Up from on-chip Rotary" - depends on PM && BF54x - default n - help - Enable Rotary Wake-Up (Voltage Regulator Power-Up) - endmenu menu "CPU Frequency scaling" diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 64d746114e4b..e713b9db867d 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -71,6 +71,7 @@ atomic_t num_spurious; #ifdef CONFIG_PM unsigned long bfin_sic_iwr[3]; /* Up to 3 SIC_IWRx registers */ +unsigned vr_wakeup; #endif struct ivgx { @@ -184,17 +185,56 @@ static void bfin_internal_unmask_irq(unsigned int irq) #ifdef CONFIG_PM int bfin_internal_set_wake(unsigned int irq, unsigned int state) { - unsigned bank, bit; + unsigned bank, bit, wakeup = 0; unsigned long flags; bank = SIC_SYSIRQ(irq) / 32; bit = SIC_SYSIRQ(irq) % 32; + switch (irq) { +#ifdef IRQ_RTC + case IRQ_RTC: + wakeup |= WAKE; + break; +#endif +#ifdef IRQ_CAN0_RX + case IRQ_CAN0_RX: + wakeup |= CANWE; + break; +#endif +#ifdef IRQ_CAN1_RX + case IRQ_CAN1_RX: + wakeup |= CANWE; + break; +#endif +#ifdef IRQ_USB_INT0 + case IRQ_USB_INT0: + wakeup |= USBWE; + break; +#endif +#ifdef IRQ_KEY + case IRQ_KEY: + wakeup |= KPADWE; + break; +#endif +#ifdef IRQ_CNT + case IRQ_CNT: + wakeup |= ROTWE; + break; +#endif + default: + break; + } + local_irq_save(flags); - if (state) + if (state) { bfin_sic_iwr[bank] |= (1 << bit); - else + vr_wakeup |= wakeup; + + } else { bfin_sic_iwr[bank] &= ~(1 << bit); + vr_wakeup &= ~wakeup; + } local_irq_restore(flags); diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index 4fe6a2366b13..143134b852ea 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -229,28 +229,12 @@ int bfin_pm_suspend_mem_enter(void) wakeup = bfin_read_VR_CTL() & ~FREQ; wakeup |= SCKELOW; - /* FIXME: merge this somehow with set_irq_wake */ -#ifdef CONFIG_PM_BFIN_WAKE_RTC - wakeup |= WAKE; -#endif #ifdef CONFIG_PM_BFIN_WAKE_PH6 wakeup |= PHYWE; #endif -#ifdef CONFIG_PM_BFIN_WAKE_CAN - wakeup |= CANWE; -#endif #ifdef CONFIG_PM_BFIN_WAKE_GP wakeup |= GPWE; #endif -#ifdef CONFIG_PM_BFIN_WAKE_USB - wakeup |= USBWE; -#endif -#ifdef CONFIG_PM_BFIN_WAKE_KEYPAD - wakeup |= KPADWE; -#endif -#ifdef CONFIG_PM_BFIN_WAKE_ROTARY - wakeup |= ROTWE; -#endif local_irq_save(flags); @@ -268,7 +252,7 @@ int bfin_pm_suspend_mem_enter(void) icache_disable(); bf53x_suspend_l1_mem(memptr); - do_hibernate(wakeup); /* Goodbye */ + do_hibernate(wakeup | vr_wakeup); /* Goodbye */ bf53x_resume_l1_mem(memptr); diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h index 9fbbee61f982..93ae5335e8a3 100644 --- a/include/asm-blackfin/bfin-global.h +++ b/include/asm-blackfin/bfin-global.h @@ -113,6 +113,7 @@ extern const char bfin_board_name[]; extern unsigned long wall_jiffies; extern unsigned long bfin_sic_iwr[]; +extern unsigned vr_wakeup; extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */ extern struct file_operations dpmc_fops; extern unsigned long _ramstart, _ramend, _rambase; -- cgit v1.2.3 From aa5829776347dbd9eeb461f650c1d085cf463a83 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Tue, 5 Aug 2008 17:47:29 +0800 Subject: Blackfin arch: be consistant with parition names, and ensure the bus is identified Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf527/boards/cm_bf527.c | 14 +++++++------- arch/blackfin/mach-bf527/boards/ezkit.c | 14 +++++++------- arch/blackfin/mach-bf533/boards/H8606.c | 6 +++--- arch/blackfin/mach-bf533/boards/cm_bf533.c | 6 +++--- arch/blackfin/mach-bf533/boards/ezkit.c | 6 +++--- arch/blackfin/mach-bf533/boards/stamp.c | 12 ++++++------ arch/blackfin/mach-bf537/boards/cm_bf537.c | 6 +++--- arch/blackfin/mach-bf537/boards/generic_board.c | 6 +++--- arch/blackfin/mach-bf537/boards/minotaur.c | 6 +++--- arch/blackfin/mach-bf537/boards/pnav10.c | 6 +++--- arch/blackfin/mach-bf537/boards/stamp.c | 18 +++++++++--------- arch/blackfin/mach-bf548/boards/cm_bf548.c | 8 ++++---- arch/blackfin/mach-bf548/boards/ezkit.c | 14 +++++++------- arch/blackfin/mach-bf561/boards/cm_bf561.c | 6 +++--- arch/blackfin/mach-bf561/boards/ezkit.c | 6 +++--- 15 files changed, 67 insertions(+), 67 deletions(-) diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 0b26ae2de5ee..749f4a806b5f 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -160,15 +160,15 @@ static struct platform_device musb_device = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -200,12 +200,12 @@ static struct platform_device ezkit_flash_device = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { - .name = "Linux Kernel", + .name = "linux kernel(nand)", .offset = 0, .size = 4 * SIZE_1M, }, { - .name = "File System", + .name = "file system(nand)", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, }, @@ -438,12 +438,12 @@ static struct platform_device net2272_bfin_device = { || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "linux kernel", + .name = "linux kernel(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 689b69c98ee4..cbd47bce6893 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -177,15 +177,15 @@ static struct platform_device bf52x_t350mcqb_device = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -217,12 +217,12 @@ static struct platform_device ezkit_flash_device = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { - .name = "Linux Kernel", + .name = "linux kernel(nand)", .offset = 0, .size = 4 * SIZE_1M, }, { - .name = "File System", + .name = "file system(nand)", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, }, @@ -460,12 +460,12 @@ static struct platform_device net2272_bfin_device = { || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "linux kernel", + .name = "linux kernel(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 4103a97c1a70..cecbc624e3df 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -141,16 +141,16 @@ static struct platform_device net2272_bfin_device = { #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00060000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0x100000, .offset = 0x60000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x6a0000, .offset = 0x00160000, } diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index ed2b0b8f5dc9..dfccf826fa33 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -53,16 +53,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF533"; #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 079389cbd859..6a34f1519c07 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -90,16 +90,16 @@ static struct platform_device smc91x_device = { #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "file system", + .name = "file system(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 13ae49515f73..d10b2dc59024 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -114,15 +114,15 @@ static struct platform_device net2272_bfin_device = { #if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) static struct mtd_partition stamp_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0xE0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -164,16 +164,16 @@ static struct platform_device stamp_flash_device = { #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "file system", + .name = "file system(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 73f2142875e2..cb73ed5cc1a4 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -56,16 +56,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF537"; #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 01b63e2ec18f..f5bc9258f83b 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -307,16 +307,16 @@ static struct platform_device net2272_bfin_device = { || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index 18ddf7a52005..48c4cd2d1be6 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -100,16 +100,16 @@ static struct platform_device net2272_bfin_device = { static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "uboot", + .name = "bootloader(spi)", .size = PSIZE_UBOOT, .offset = 0x000000, .mask_flags = MTD_CAP_ROM }, { - .name = "initramfs", + .name = "initramfs(spi)", .size = PSIZE_INITRAMFS, .offset = PSIZE_UBOOT }, { - .name = "opt", + .name = "opt(spi)", .size = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS), .offset = PSIZE_UBOOT + PSIZE_INITRAMFS, } diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 51c3bab14a69..f9174c11cbd4 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -231,16 +231,16 @@ static struct platform_device net2272_bfin_device = { || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 6dbc76fb080b..e93964fdb432 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -364,11 +364,11 @@ const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; static struct mtd_partition bfin_plat_nand_partitions[] = { { - .name = "linux kernel", + .name = "linux kernel(nand)", .size = 0x400000, .offset = 0, }, { - .name = "file system", + .name = "file system(nand)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, }, @@ -439,19 +439,19 @@ static void bfin_plat_nand_init(void) {} #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition stamp_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0xE0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = 0x400000 - 0x40000 - 0xE0000 - 0x10000, .offset = MTDPART_OFS_APPEND, }, { - .name = "MAC Address", + .name = "MAC Address(nor)", .size = MTDPART_SIZ_FULL, .offset = 0x3F0000, .mask_flags = MTD_WRITEABLE, @@ -485,16 +485,16 @@ static struct platform_device stamp_flash_device = { || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "file system", + .name = "file system(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index 4f4ae8787edf..58abbed0a225 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -319,12 +319,12 @@ static struct platform_device bfin_atapi_device = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { - .name = "Linux Kernel", + .name = "linux kernel(nand)", .offset = 0, .size = 4 * SIZE_1M, }, { - .name = "File System", + .name = "file system(nand)", .offset = 4 * SIZE_1M, .size = (256 - 4) * SIZE_1M, }, @@ -377,12 +377,12 @@ static struct platform_device bf54x_sdh_device = { /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "linux kernel", + .name = "linux kernel(spi)", .size = 0x1c0000, .offset = 0x40000 } diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 166fa2201ee7..0d6333ada1d9 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -365,12 +365,12 @@ static struct platform_device bfin_atapi_device = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { - .name = "Linux Kernel", + .name = "linux kernel(nand)", .offset = 0, .size = 4 * SIZE_1M, }, { - .name = "File System", + .name = "file system(nand)", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, }, @@ -419,15 +419,15 @@ static struct platform_device bf54x_sdh_device = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -461,12 +461,12 @@ static struct platform_device ezkit_flash_device = { /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "linux kernel", + .name = "linux kernel(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 466ef5929a25..1309ec15b3cf 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -54,16 +54,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF561"; #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index bc6feded8569..2affbdf2fb4a 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -243,15 +243,15 @@ static struct platform_device bfin_sir_device = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } -- cgit v1.2.3 From 8ea8949733e35597efa45e71c0d3d65cafd7687a Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 5 Aug 2008 18:14:44 +0800 Subject: Blackfin arch: add board resources for parallel flash on cm-bf537 Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf537/boards/cm_bf537.c | 54 ++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index cb73ed5cc1a4..fa6064f6d575 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) @@ -307,6 +308,55 @@ static struct platform_device net2272_bfin_device = { }; #endif +#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +static struct mtd_partition cm_partitions[] = { + { + .name = "bootloader(nor)", + .size = 0x40000, + .offset = 0, + }, { + .name = "linux kernel(nor)", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(nor)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data cm_flash_data = { + .width = 2, + .parts = cm_partitions, + .nr_parts = ARRAY_SIZE(cm_partitions), +}; + +static unsigned cm_flash_gpios[] = { GPIO_PF4 }; + +static struct resource cm_flash_resource[] = { + { + .name = "cfi_probe", + .start = 0x20000000, + .end = 0x201fffff, + .flags = IORESOURCE_MEM, + }, { + .start = (unsigned long)cm_flash_gpios, + .end = ARRAY_SIZE(cm_flash_gpios), + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device cm_flash_device = { + .name = "gpio-addr-flash", + .id = 0, + .dev = { + .platform_data = &cm_flash_data, + }, + .num_resources = ARRAY_SIZE(cm_flash_resource), + .resource = cm_flash_resource, +}; +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { { @@ -510,6 +560,10 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) + &cm_flash_device, +#endif }; static int __init cm_bf537_init(void) -- cgit v1.2.3 From b9da3b9240f175a29274abb8a94d962b67bbabf6 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 13 Aug 2008 15:49:35 +0800 Subject: Blackfin arch: add support for board tcm-bf537 Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/configs/TCM-BF537_defconfig | 693 ++++++++++++++++++++++++++++ arch/blackfin/mach-bf537/boards/Kconfig | 6 + arch/blackfin/mach-bf537/boards/Makefile | 1 + arch/blackfin/mach-bf537/boards/tcm_bf537.c | 590 +++++++++++++++++++++++ 4 files changed, 1290 insertions(+) create mode 100644 arch/blackfin/configs/TCM-BF537_defconfig create mode 100644 arch/blackfin/mach-bf537/boards/tcm_bf537.c diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig new file mode 100644 index 000000000000..c482ee171f9e --- /dev/null +++ b/arch/blackfin/configs/TCM-BF537_defconfig @@ -0,0 +1,693 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24.7 +# Thu Jul 31 00:53:15 2008 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +CONFIG_BF537=y +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +CONFIG_BF_REV_0_2=y +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_TMR0=12 +CONFIG_IRQ_TMR1=12 +CONFIG_IRQ_TMR2=12 +CONFIG_IRQ_TMR3=12 +CONFIG_IRQ_TMR4=12 +CONFIG_IRQ_TMR5=12 +CONFIG_IRQ_TMR6=12 +CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 +# CONFIG_BFIN537_STAMP is not set +# CONFIG_BFIN537_BLUETECHNIX_CM is not set +CONFIG_BFIN537_BLUETECHNIX_TCM=y +# CONFIG_PNAV10 is not set +# CONFIG_CAMSIG_MINOTAUR is not set +# CONFIG_GENERIC_BF537_BOARD is not set + +# +# BF537 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA_ERROR=7 +CONFIG_IRQ_ERROR=7 +CONFIG_IRQ_CAN_RX=11 +CONFIG_IRQ_CAN_TX=11 +CONFIG_IRQ_PROG_INTA=12 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=32 +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# Misc +# +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +CONFIG_IP_CHECKSUM_L1=y +CONFIG_CACHELINE_ALIGNED_L1=y +CONFIG_SYSCALL_TAB_L1=y +CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xFFC2 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_GPIO_ADDR is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_BFIN_UART1=y +# CONFIG_BFIN_UART1_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_INSTRUMENTATION is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_MMRS=y +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig index 7e789dbef036..42a57b0acb29 100644 --- a/arch/blackfin/mach-bf537/boards/Kconfig +++ b/arch/blackfin/mach-bf537/boards/Kconfig @@ -15,6 +15,12 @@ config BFIN537_BLUETECHNIX_CM help CM-BF537 support for EVAL- and DEV-Board. +config BFIN537_BLUETECHNIX_TCM + bool "Bluetechnix TCM-BF537" + depends on (BF537) + help + TCM-BF537 support for EVAL- and DEV-Board. + config PNAV10 bool "PNAV board" depends on (BF537) diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile index c94f7a5b8211..7168cc14afd8 100644 --- a/arch/blackfin/mach-bf537/boards/Makefile +++ b/arch/blackfin/mach-bf537/boards/Makefile @@ -5,5 +5,6 @@ obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o obj-$(CONFIG_BFIN537_STAMP) += stamp.o obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o +obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o obj-$(CONFIG_PNAV10) += pnav10.o obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c new file mode 100644 index 000000000000..196e5775a6ae --- /dev/null +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -0,0 +1,590 @@ +/* + * File: arch/blackfin/mach-bf537/boards/tcm_bf537.c + * Based on: arch/blackfin/mach-bf533/boards/cm_bf537.c + * Author: Aidan Williams + * + * Created: 2005 + * Description: Board description file + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include +#endif +#include +#include +#include +#include +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "Bluetechnix TCM BF537"; + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00020000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = 0xe0000, + .offset = 0x20000 + }, { + .name = "file system(spi)", + .size = 0x700000, + .offset = 0x00100000, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) +static struct bfin5xx_spi_chip ad9960_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) + { + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif + +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) + { + .modalias = "ad9960-spi", + .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &ad9960_spi_chip_info, + }, +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 7, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +static struct platform_device hitachi_fb_device = { + .name = "hitachi-tx09", +}; +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .start = 0x20200300, + .end = 0x20200300 + 16, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF14, + .end = IRQ_PF14, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x20308000, + .end = 0x20308000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20308004, + .end = 0x20308004, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PG15, + .end = IRQ_PG15, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x20200000, + .end = 0x20200000 + 0x100, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PH14, + .end = IRQ_PH14, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif + +#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +static struct mtd_partition cm_partitions[] = { + { + .name = "bootloader(nor)", + .size = 0x40000, + .offset = 0, + }, { + .name = "linux kernel(nor)", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(nor)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data cm_flash_data = { + .width = 2, + .parts = cm_partitions, + .nr_parts = ARRAY_SIZE(cm_partitions), +}; + +static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 }; + +static struct resource cm_flash_resource[] = { + { + .name = "cfi_probe", + .start = 0x20000000, + .end = 0x201fffff, + .flags = IORESOURCE_MEM, + }, { + .start = (unsigned long)cm_flash_gpios, + .end = ARRAY_SIZE(cm_flash_gpios), + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device cm_flash_device = { + .name = "gpio-addr-flash", + .id = 0, + .dev = { + .platform_data = &cm_flash_data, + }, + .num_resources = ARRAY_SIZE(cm_flash_resource), + .resource = cm_flash_resource, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mac_device = { + .name = "bfin_mac", +}; +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 64 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 2, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x2030C000, + .end = 0x2030C01F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2030D018, + .end = 0x2030D01B, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + +static const unsigned int cclk_vlev_datasheet[] = +{ + VRPAIR(VLEV_085, 250000000), + VRPAIR(VLEV_090, 376000000), + VRPAIR(VLEV_095, 426000000), + VRPAIR(VLEV_100, 426000000), + VRPAIR(VLEV_105, 476000000), + VRPAIR(VLEV_110, 476000000), + VRPAIR(VLEV_115, 476000000), + VRPAIR(VLEV_120, 500000000), + VRPAIR(VLEV_125, 533000000), + VRPAIR(VLEV_130, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *cm_bf537_devices[] __initdata = { + + &bfin_dpmc, + +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) + &hitachi_fb_device, +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) + &isp1362_hcd_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mac_device, +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + &net2272_bfin_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif + +#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) + &cm_flash_device, +#endif +}; + +static int __init cm_bf537_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __func__); + platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif + return 0; +} + +arch_initcall(cm_bf537_init); + +void bfin_get_ether_addr(char *addr) +{ + random_ether_addr(addr); + printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); +} +EXPORT_SYMBOL(bfin_get_ether_addr); -- cgit v1.2.3 From 908089118dd5b20c6694e9543fccd9b2490b1c6b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 5 Aug 2008 18:41:20 +0800 Subject: Blackfin arch: remove pata resources from generic board these are highly board specific, so putting into generic doesnt make much sense Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf527/boards/cm_bf527.c | 46 ------------------------- arch/blackfin/mach-bf527/boards/ezkit.c | 46 ------------------------- arch/blackfin/mach-bf533/boards/H8606.c | 1 - arch/blackfin/mach-bf533/boards/cm_bf533.c | 46 ------------------------- arch/blackfin/mach-bf533/boards/ezkit.c | 46 ------------------------- arch/blackfin/mach-bf533/boards/stamp.c | 46 ------------------------- arch/blackfin/mach-bf537/boards/generic_board.c | 45 ------------------------ arch/blackfin/mach-bf561/boards/ezkit.c | 46 ------------------------- 8 files changed, 322 deletions(-) diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 749f4a806b5f..d22bc7773717 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -39,7 +39,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif -#include #include #include #include @@ -799,43 +798,6 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include #include @@ -961,10 +923,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport1_uart_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -987,10 +945,6 @@ static int __init stamp_init(void) platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index cbd47bce6893..762f754c06cc 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -38,7 +38,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif -#include #include #include #include @@ -825,43 +824,6 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include #include @@ -996,10 +958,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport1_uart_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -1022,10 +980,6 @@ static int __init stamp_init(void) platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index cecbc624e3df..c66a68f30239 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -38,7 +38,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif -#include #include #include diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index dfccf826fa33..575843f6d9ef 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -36,7 +36,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif -#include #include #include #include @@ -307,43 +306,6 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 38 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 2, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x2030C000, - .end = 0x2030C01F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2030D018, - .end = 0x2030D01B, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - static const unsigned int cclk_vlev_datasheet[] = { VRPAIR(VLEV_085, 250000000), @@ -403,10 +365,6 @@ static struct platform_device *cm_bf533_devices[] __initdata = { #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, #endif - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif }; static int __init cm_bf533_init(void) @@ -416,10 +374,6 @@ static int __init cm_bf533_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 6a34f1519c07..cc2e7eeb1d5a 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -37,7 +37,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif -#include #include #include #include @@ -255,43 +254,6 @@ static struct platform_device bfin_sir_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include #include @@ -404,10 +366,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_sir_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -424,10 +382,6 @@ static int __init ezkit_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index d10b2dc59024..050ffca53530 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -38,7 +38,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif -#include #include #include #include @@ -404,43 +403,6 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include #include @@ -583,10 +545,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport1_uart_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -625,10 +583,6 @@ static int __init stamp_init(void) #endif spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index f5bc9258f83b..78a13d5bfd55 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -38,7 +38,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif -#include #include #include #include @@ -619,43 +618,6 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) &bfin_pcmcia_cf_device, @@ -717,10 +679,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport0_uart_device, &bfin_sport1_uart_device, #endif - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif }; static int __init stamp_init(void) @@ -732,9 +690,6 @@ static int __init stamp_init(void) ARRAY_SIZE(bfin_spi_board_info)); #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 2affbdf2fb4a..50b4cdceccfe 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include @@ -350,43 +349,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include #include @@ -499,10 +461,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_sir_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -538,10 +496,6 @@ static int __init ezkit_init(void) #endif spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } -- cgit v1.2.3 From fe5aeb93024791a5aa69741015db33093198ff47 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 5 Aug 2008 18:29:56 +0800 Subject: Blackfin arch: use symbolic IRQ_PF define rather than hardcoded Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf537/boards/cm_bf537.c | 2 +- arch/blackfin/mach-bf537/boards/tcm_bf537.c | 2 +- arch/blackfin/mach-bf561/boards/cm_bf561.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index fa6064f6d575..dde14720b0ea 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -445,7 +445,7 @@ static struct platform_device bfin_mac_device = { #endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 64 +#define PATA_INT IRQ_PF14 static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 2, diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 196e5775a6ae..d5ff705a5129 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -445,7 +445,7 @@ static struct platform_device bfin_mac_device = { #endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 64 +#define PATA_INT IRQ_PF14 static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 2, diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 1309ec15b3cf..8f40990eea2f 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -306,7 +306,7 @@ static struct platform_device bfin_sir_device = { #endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 119 +#define PATA_INT IRQ_PF46 static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 2, -- cgit v1.2.3 From d6a29891369827317659b7833170d2f5f0c7b97f Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 5 Aug 2008 18:28:26 +0800 Subject: Blackfin arch: Fix bugs - Make kgdb code apparent to app debugging. - Skip single step if global interrupt disable bit is set. - Extend bernds' patch r4673 to skip single step in any interrupt entry that interrupts the code which is under single stepping. Bernds' patch only allow user space single stepping. Singed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/entry.S | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 3db2f4df261b..4bd971e81f1f 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -163,6 +163,8 @@ ENTRY(_ex_single_step) p5.l = lo(IPEND); p5.h = hi(IPEND); r6 = [p5]; + cc = bittst(r6, 4); + if cc jump _bfin_return_from_exception; cc = bittst(r6, 5); if cc jump _bfin_return_from_exception; @@ -186,10 +188,9 @@ ENTRY(_ex_single_step) if cc jump .Ldo_single_step; r6 += -1; cc = r6 < r7; - if cc jump _bfin_return_from_exception; + if cc jump 1f; .Ldo_single_step: -#endif - +#else /* If we were in user mode, do the single step normally. */ p5.l = lo(IPEND); p5.h = hi(IPEND); @@ -198,6 +199,7 @@ ENTRY(_ex_single_step) r7 = r7 & r6; cc = r7 == 0; if !cc jump 1f; +#endif /* Single stepping only a single instruction, so clear the trace * bit here. */ -- cgit v1.2.3 From 84db8d7cdb072866f5a6c6ac2c9a74c5c48dd22f Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 5 Aug 2008 13:35:07 +0200 Subject: avr32: Move include/asm-avr32 to arch/avr32/include/asm Leaving include/asm/arch alone for now. Signed-off-by: Haavard Skinnemoen --- arch/avr32/include/asm/Kbuild | 3 + arch/avr32/include/asm/a.out.h | 20 ++ arch/avr32/include/asm/addrspace.h | 43 +++ arch/avr32/include/asm/asm.h | 102 ++++++ arch/avr32/include/asm/atmel-mci.h | 9 + arch/avr32/include/asm/atomic.h | 201 +++++++++++ arch/avr32/include/asm/auxvec.h | 4 + arch/avr32/include/asm/bitops.h | 301 ++++++++++++++++ arch/avr32/include/asm/bug.h | 73 ++++ arch/avr32/include/asm/bugs.h | 15 + arch/avr32/include/asm/byteorder.h | 31 ++ arch/avr32/include/asm/cache.h | 38 ++ arch/avr32/include/asm/cachectl.h | 11 + arch/avr32/include/asm/cacheflush.h | 131 +++++++ arch/avr32/include/asm/checksum.h | 152 ++++++++ arch/avr32/include/asm/cputime.h | 6 + arch/avr32/include/asm/current.h | 15 + arch/avr32/include/asm/delay.h | 26 ++ arch/avr32/include/asm/device.h | 7 + arch/avr32/include/asm/div64.h | 6 + arch/avr32/include/asm/dma-mapping.h | 349 ++++++++++++++++++ arch/avr32/include/asm/dma.h | 8 + arch/avr32/include/asm/elf.h | 108 ++++++ arch/avr32/include/asm/emergency-restart.h | 6 + arch/avr32/include/asm/errno.h | 6 + arch/avr32/include/asm/fb.h | 21 ++ arch/avr32/include/asm/fcntl.h | 6 + arch/avr32/include/asm/futex.h | 6 + arch/avr32/include/asm/gpio.h | 6 + arch/avr32/include/asm/hardirq.h | 34 ++ arch/avr32/include/asm/hw_irq.h | 9 + arch/avr32/include/asm/io.h | 312 +++++++++++++++++ arch/avr32/include/asm/ioctl.h | 6 + arch/avr32/include/asm/ioctls.h | 87 +++++ arch/avr32/include/asm/ipcbuf.h | 29 ++ arch/avr32/include/asm/irq.h | 24 ++ arch/avr32/include/asm/irq_regs.h | 1 + arch/avr32/include/asm/irqflags.h | 68 ++++ arch/avr32/include/asm/kdebug.h | 11 + arch/avr32/include/asm/kmap_types.h | 30 ++ arch/avr32/include/asm/kprobes.h | 35 ++ arch/avr32/include/asm/linkage.h | 7 + arch/avr32/include/asm/local.h | 6 + arch/avr32/include/asm/mach/serial_at91.h | 33 ++ arch/avr32/include/asm/mman.h | 17 + arch/avr32/include/asm/mmu.h | 10 + arch/avr32/include/asm/mmu_context.h | 148 ++++++++ arch/avr32/include/asm/module.h | 28 ++ arch/avr32/include/asm/msgbuf.h | 31 ++ arch/avr32/include/asm/mutex.h | 9 + arch/avr32/include/asm/numnodes.h | 7 + arch/avr32/include/asm/ocd.h | 543 +++++++++++++++++++++++++++++ arch/avr32/include/asm/page.h | 104 ++++++ arch/avr32/include/asm/param.h | 23 ++ arch/avr32/include/asm/pci.h | 10 + arch/avr32/include/asm/percpu.h | 6 + arch/avr32/include/asm/pgalloc.h | 98 ++++++ arch/avr32/include/asm/pgtable-2level.h | 47 +++ arch/avr32/include/asm/pgtable.h | 377 ++++++++++++++++++++ arch/avr32/include/asm/poll.h | 1 + arch/avr32/include/asm/posix_types.h | 125 +++++++ arch/avr32/include/asm/processor.h | 178 ++++++++++ arch/avr32/include/asm/ptrace.h | 157 +++++++++ arch/avr32/include/asm/resource.h | 6 + arch/avr32/include/asm/scatterlist.h | 26 ++ arch/avr32/include/asm/sections.h | 6 + arch/avr32/include/asm/sembuf.h | 25 ++ arch/avr32/include/asm/serial.h | 13 + arch/avr32/include/asm/setup.h | 138 ++++++++ arch/avr32/include/asm/shmbuf.h | 42 +++ arch/avr32/include/asm/shmparam.h | 6 + arch/avr32/include/asm/sigcontext.h | 34 ++ arch/avr32/include/asm/siginfo.h | 6 + arch/avr32/include/asm/signal.h | 168 +++++++++ arch/avr32/include/asm/socket.h | 57 +++ arch/avr32/include/asm/sockios.h | 13 + arch/avr32/include/asm/stat.h | 79 +++++ arch/avr32/include/asm/statfs.h | 6 + arch/avr32/include/asm/string.h | 17 + arch/avr32/include/asm/sysreg.h | 291 ++++++++++++++++ arch/avr32/include/asm/system.h | 178 ++++++++++ arch/avr32/include/asm/termbits.h | 195 +++++++++++ arch/avr32/include/asm/termios.h | 62 ++++ arch/avr32/include/asm/thread_info.h | 115 ++++++ arch/avr32/include/asm/timex.h | 39 +++ arch/avr32/include/asm/tlb.h | 32 ++ arch/avr32/include/asm/tlbflush.h | 32 ++ arch/avr32/include/asm/topology.h | 6 + arch/avr32/include/asm/traps.h | 23 ++ arch/avr32/include/asm/types.h | 37 ++ arch/avr32/include/asm/uaccess.h | 324 +++++++++++++++++ arch/avr32/include/asm/ucontext.h | 12 + arch/avr32/include/asm/unaligned.h | 21 ++ arch/avr32/include/asm/unistd.h | 345 ++++++++++++++++++ arch/avr32/include/asm/user.h | 65 ++++ arch/avr32/include/asm/xor.h | 6 + include/asm-avr32/Kbuild | 3 - include/asm-avr32/a.out.h | 20 -- include/asm-avr32/addrspace.h | 43 --- include/asm-avr32/asm.h | 102 ------ include/asm-avr32/atmel-mci.h | 9 - include/asm-avr32/atomic.h | 201 ----------- include/asm-avr32/auxvec.h | 4 - include/asm-avr32/bitops.h | 301 ---------------- include/asm-avr32/bug.h | 73 ---- include/asm-avr32/bugs.h | 15 - include/asm-avr32/byteorder.h | 31 -- include/asm-avr32/cache.h | 38 -- include/asm-avr32/cachectl.h | 11 - include/asm-avr32/cacheflush.h | 131 ------- include/asm-avr32/checksum.h | 152 -------- include/asm-avr32/cputime.h | 6 - include/asm-avr32/current.h | 15 - include/asm-avr32/delay.h | 26 -- include/asm-avr32/device.h | 7 - include/asm-avr32/div64.h | 6 - include/asm-avr32/dma-mapping.h | 349 ------------------ include/asm-avr32/dma.h | 8 - include/asm-avr32/elf.h | 108 ------ include/asm-avr32/emergency-restart.h | 6 - include/asm-avr32/errno.h | 6 - include/asm-avr32/fb.h | 21 -- include/asm-avr32/fcntl.h | 6 - include/asm-avr32/futex.h | 6 - include/asm-avr32/gpio.h | 6 - include/asm-avr32/hardirq.h | 34 -- include/asm-avr32/hw_irq.h | 9 - include/asm-avr32/io.h | 312 ----------------- include/asm-avr32/ioctl.h | 6 - include/asm-avr32/ioctls.h | 87 ----- include/asm-avr32/ipcbuf.h | 29 -- include/asm-avr32/irq.h | 24 -- include/asm-avr32/irq_regs.h | 1 - include/asm-avr32/irqflags.h | 68 ---- include/asm-avr32/kdebug.h | 11 - include/asm-avr32/kmap_types.h | 30 -- include/asm-avr32/kprobes.h | 35 -- include/asm-avr32/linkage.h | 7 - include/asm-avr32/local.h | 6 - include/asm-avr32/mach/serial_at91.h | 33 -- include/asm-avr32/mman.h | 17 - include/asm-avr32/mmu.h | 10 - include/asm-avr32/mmu_context.h | 148 -------- include/asm-avr32/module.h | 28 -- include/asm-avr32/msgbuf.h | 31 -- include/asm-avr32/mutex.h | 9 - include/asm-avr32/numnodes.h | 7 - include/asm-avr32/ocd.h | 543 ----------------------------- include/asm-avr32/page.h | 104 ------ include/asm-avr32/param.h | 23 -- include/asm-avr32/pci.h | 10 - include/asm-avr32/percpu.h | 6 - include/asm-avr32/pgalloc.h | 98 ------ include/asm-avr32/pgtable-2level.h | 47 --- include/asm-avr32/pgtable.h | 377 -------------------- include/asm-avr32/poll.h | 1 - include/asm-avr32/posix_types.h | 125 ------- include/asm-avr32/processor.h | 178 ---------- include/asm-avr32/ptrace.h | 157 --------- include/asm-avr32/resource.h | 6 - include/asm-avr32/scatterlist.h | 26 -- include/asm-avr32/sections.h | 6 - include/asm-avr32/sembuf.h | 25 -- include/asm-avr32/serial.h | 13 - include/asm-avr32/setup.h | 138 -------- include/asm-avr32/shmbuf.h | 42 --- include/asm-avr32/shmparam.h | 6 - include/asm-avr32/sigcontext.h | 34 -- include/asm-avr32/siginfo.h | 6 - include/asm-avr32/signal.h | 168 --------- include/asm-avr32/socket.h | 57 --- include/asm-avr32/sockios.h | 13 - include/asm-avr32/stat.h | 79 ----- include/asm-avr32/statfs.h | 6 - include/asm-avr32/string.h | 17 - include/asm-avr32/sysreg.h | 291 ---------------- include/asm-avr32/system.h | 178 ---------- include/asm-avr32/termbits.h | 195 ----------- include/asm-avr32/termios.h | 62 ---- include/asm-avr32/thread_info.h | 115 ------ include/asm-avr32/timex.h | 39 --- include/asm-avr32/tlb.h | 32 -- include/asm-avr32/tlbflush.h | 32 -- include/asm-avr32/topology.h | 6 - include/asm-avr32/traps.h | 23 -- include/asm-avr32/types.h | 37 -- include/asm-avr32/uaccess.h | 324 ----------------- include/asm-avr32/ucontext.h | 12 - include/asm-avr32/unaligned.h | 21 -- include/asm-avr32/unistd.h | 345 ------------------ include/asm-avr32/user.h | 65 ---- include/asm-avr32/xor.h | 6 - 192 files changed, 6746 insertions(+), 6746 deletions(-) create mode 100644 arch/avr32/include/asm/Kbuild create mode 100644 arch/avr32/include/asm/a.out.h create mode 100644 arch/avr32/include/asm/addrspace.h create mode 100644 arch/avr32/include/asm/asm.h create mode 100644 arch/avr32/include/asm/atmel-mci.h create mode 100644 arch/avr32/include/asm/atomic.h create mode 100644 arch/avr32/include/asm/auxvec.h create mode 100644 arch/avr32/include/asm/bitops.h create mode 100644 arch/avr32/include/asm/bug.h create mode 100644 arch/avr32/include/asm/bugs.h create mode 100644 arch/avr32/include/asm/byteorder.h create mode 100644 arch/avr32/include/asm/cache.h create mode 100644 arch/avr32/include/asm/cachectl.h create mode 100644 arch/avr32/include/asm/cacheflush.h create mode 100644 arch/avr32/include/asm/checksum.h create mode 100644 arch/avr32/include/asm/cputime.h create mode 100644 arch/avr32/include/asm/current.h create mode 100644 arch/avr32/include/asm/delay.h create mode 100644 arch/avr32/include/asm/device.h create mode 100644 arch/avr32/include/asm/div64.h create mode 100644 arch/avr32/include/asm/dma-mapping.h create mode 100644 arch/avr32/include/asm/dma.h create mode 100644 arch/avr32/include/asm/elf.h create mode 100644 arch/avr32/include/asm/emergency-restart.h create mode 100644 arch/avr32/include/asm/errno.h create mode 100644 arch/avr32/include/asm/fb.h create mode 100644 arch/avr32/include/asm/fcntl.h create mode 100644 arch/avr32/include/asm/futex.h create mode 100644 arch/avr32/include/asm/gpio.h create mode 100644 arch/avr32/include/asm/hardirq.h create mode 100644 arch/avr32/include/asm/hw_irq.h create mode 100644 arch/avr32/include/asm/io.h create mode 100644 arch/avr32/include/asm/ioctl.h create mode 100644 arch/avr32/include/asm/ioctls.h create mode 100644 arch/avr32/include/asm/ipcbuf.h create mode 100644 arch/avr32/include/asm/irq.h create mode 100644 arch/avr32/include/asm/irq_regs.h create mode 100644 arch/avr32/include/asm/irqflags.h create mode 100644 arch/avr32/include/asm/kdebug.h create mode 100644 arch/avr32/include/asm/kmap_types.h create mode 100644 arch/avr32/include/asm/kprobes.h create mode 100644 arch/avr32/include/asm/linkage.h create mode 100644 arch/avr32/include/asm/local.h create mode 100644 arch/avr32/include/asm/mach/serial_at91.h create mode 100644 arch/avr32/include/asm/mman.h create mode 100644 arch/avr32/include/asm/mmu.h create mode 100644 arch/avr32/include/asm/mmu_context.h create mode 100644 arch/avr32/include/asm/module.h create mode 100644 arch/avr32/include/asm/msgbuf.h create mode 100644 arch/avr32/include/asm/mutex.h create mode 100644 arch/avr32/include/asm/numnodes.h create mode 100644 arch/avr32/include/asm/ocd.h create mode 100644 arch/avr32/include/asm/page.h create mode 100644 arch/avr32/include/asm/param.h create mode 100644 arch/avr32/include/asm/pci.h create mode 100644 arch/avr32/include/asm/percpu.h create mode 100644 arch/avr32/include/asm/pgalloc.h create mode 100644 arch/avr32/include/asm/pgtable-2level.h create mode 100644 arch/avr32/include/asm/pgtable.h create mode 100644 arch/avr32/include/asm/poll.h create mode 100644 arch/avr32/include/asm/posix_types.h create mode 100644 arch/avr32/include/asm/processor.h create mode 100644 arch/avr32/include/asm/ptrace.h create mode 100644 arch/avr32/include/asm/resource.h create mode 100644 arch/avr32/include/asm/scatterlist.h create mode 100644 arch/avr32/include/asm/sections.h create mode 100644 arch/avr32/include/asm/sembuf.h create mode 100644 arch/avr32/include/asm/serial.h create mode 100644 arch/avr32/include/asm/setup.h create mode 100644 arch/avr32/include/asm/shmbuf.h create mode 100644 arch/avr32/include/asm/shmparam.h create mode 100644 arch/avr32/include/asm/sigcontext.h create mode 100644 arch/avr32/include/asm/siginfo.h create mode 100644 arch/avr32/include/asm/signal.h create mode 100644 arch/avr32/include/asm/socket.h create mode 100644 arch/avr32/include/asm/sockios.h create mode 100644 arch/avr32/include/asm/stat.h create mode 100644 arch/avr32/include/asm/statfs.h create mode 100644 arch/avr32/include/asm/string.h create mode 100644 arch/avr32/include/asm/sysreg.h create mode 100644 arch/avr32/include/asm/system.h create mode 100644 arch/avr32/include/asm/termbits.h create mode 100644 arch/avr32/include/asm/termios.h create mode 100644 arch/avr32/include/asm/thread_info.h create mode 100644 arch/avr32/include/asm/timex.h create mode 100644 arch/avr32/include/asm/tlb.h create mode 100644 arch/avr32/include/asm/tlbflush.h create mode 100644 arch/avr32/include/asm/topology.h create mode 100644 arch/avr32/include/asm/traps.h create mode 100644 arch/avr32/include/asm/types.h create mode 100644 arch/avr32/include/asm/uaccess.h create mode 100644 arch/avr32/include/asm/ucontext.h create mode 100644 arch/avr32/include/asm/unaligned.h create mode 100644 arch/avr32/include/asm/unistd.h create mode 100644 arch/avr32/include/asm/user.h create mode 100644 arch/avr32/include/asm/xor.h delete mode 100644 include/asm-avr32/Kbuild delete mode 100644 include/asm-avr32/a.out.h delete mode 100644 include/asm-avr32/addrspace.h delete mode 100644 include/asm-avr32/asm.h delete mode 100644 include/asm-avr32/atmel-mci.h delete mode 100644 include/asm-avr32/atomic.h delete mode 100644 include/asm-avr32/auxvec.h delete mode 100644 include/asm-avr32/bitops.h delete mode 100644 include/asm-avr32/bug.h delete mode 100644 include/asm-avr32/bugs.h delete mode 100644 include/asm-avr32/byteorder.h delete mode 100644 include/asm-avr32/cache.h delete mode 100644 include/asm-avr32/cachectl.h delete mode 100644 include/asm-avr32/cacheflush.h delete mode 100644 include/asm-avr32/checksum.h delete mode 100644 include/asm-avr32/cputime.h delete mode 100644 include/asm-avr32/current.h delete mode 100644 include/asm-avr32/delay.h delete mode 100644 include/asm-avr32/device.h delete mode 100644 include/asm-avr32/div64.h delete mode 100644 include/asm-avr32/dma-mapping.h delete mode 100644 include/asm-avr32/dma.h delete mode 100644 include/asm-avr32/elf.h delete mode 100644 include/asm-avr32/emergency-restart.h delete mode 100644 include/asm-avr32/errno.h delete mode 100644 include/asm-avr32/fb.h delete mode 100644 include/asm-avr32/fcntl.h delete mode 100644 include/asm-avr32/futex.h delete mode 100644 include/asm-avr32/gpio.h delete mode 100644 include/asm-avr32/hardirq.h delete mode 100644 include/asm-avr32/hw_irq.h delete mode 100644 include/asm-avr32/io.h delete mode 100644 include/asm-avr32/ioctl.h delete mode 100644 include/asm-avr32/ioctls.h delete mode 100644 include/asm-avr32/ipcbuf.h delete mode 100644 include/asm-avr32/irq.h delete mode 100644 include/asm-avr32/irq_regs.h delete mode 100644 include/asm-avr32/irqflags.h delete mode 100644 include/asm-avr32/kdebug.h delete mode 100644 include/asm-avr32/kmap_types.h delete mode 100644 include/asm-avr32/kprobes.h delete mode 100644 include/asm-avr32/linkage.h delete mode 100644 include/asm-avr32/local.h delete mode 100644 include/asm-avr32/mach/serial_at91.h delete mode 100644 include/asm-avr32/mman.h delete mode 100644 include/asm-avr32/mmu.h delete mode 100644 include/asm-avr32/mmu_context.h delete mode 100644 include/asm-avr32/module.h delete mode 100644 include/asm-avr32/msgbuf.h delete mode 100644 include/asm-avr32/mutex.h delete mode 100644 include/asm-avr32/numnodes.h delete mode 100644 include/asm-avr32/ocd.h delete mode 100644 include/asm-avr32/page.h delete mode 100644 include/asm-avr32/param.h delete mode 100644 include/asm-avr32/pci.h delete mode 100644 include/asm-avr32/percpu.h delete mode 100644 include/asm-avr32/pgalloc.h delete mode 100644 include/asm-avr32/pgtable-2level.h delete mode 100644 include/asm-avr32/pgtable.h delete mode 100644 include/asm-avr32/poll.h delete mode 100644 include/asm-avr32/posix_types.h delete mode 100644 include/asm-avr32/processor.h delete mode 100644 include/asm-avr32/ptrace.h delete mode 100644 include/asm-avr32/resource.h delete mode 100644 include/asm-avr32/scatterlist.h delete mode 100644 include/asm-avr32/sections.h delete mode 100644 include/asm-avr32/sembuf.h delete mode 100644 include/asm-avr32/serial.h delete mode 100644 include/asm-avr32/setup.h delete mode 100644 include/asm-avr32/shmbuf.h delete mode 100644 include/asm-avr32/shmparam.h delete mode 100644 include/asm-avr32/sigcontext.h delete mode 100644 include/asm-avr32/siginfo.h delete mode 100644 include/asm-avr32/signal.h delete mode 100644 include/asm-avr32/socket.h delete mode 100644 include/asm-avr32/sockios.h delete mode 100644 include/asm-avr32/stat.h delete mode 100644 include/asm-avr32/statfs.h delete mode 100644 include/asm-avr32/string.h delete mode 100644 include/asm-avr32/sysreg.h delete mode 100644 include/asm-avr32/system.h delete mode 100644 include/asm-avr32/termbits.h delete mode 100644 include/asm-avr32/termios.h delete mode 100644 include/asm-avr32/thread_info.h delete mode 100644 include/asm-avr32/timex.h delete mode 100644 include/asm-avr32/tlb.h delete mode 100644 include/asm-avr32/tlbflush.h delete mode 100644 include/asm-avr32/topology.h delete mode 100644 include/asm-avr32/traps.h delete mode 100644 include/asm-avr32/types.h delete mode 100644 include/asm-avr32/uaccess.h delete mode 100644 include/asm-avr32/ucontext.h delete mode 100644 include/asm-avr32/unaligned.h delete mode 100644 include/asm-avr32/unistd.h delete mode 100644 include/asm-avr32/user.h delete mode 100644 include/asm-avr32/xor.h diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild new file mode 100644 index 000000000000..3136628ba8d2 --- /dev/null +++ b/arch/avr32/include/asm/Kbuild @@ -0,0 +1,3 @@ +include include/asm-generic/Kbuild.asm + +header-y += cachectl.h diff --git a/arch/avr32/include/asm/a.out.h b/arch/avr32/include/asm/a.out.h new file mode 100644 index 000000000000..e46375a34a72 --- /dev/null +++ b/arch/avr32/include/asm/a.out.h @@ -0,0 +1,20 @@ +#ifndef __ASM_AVR32_A_OUT_H +#define __ASM_AVR32_A_OUT_H + +struct exec +{ + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#endif /* __ASM_AVR32_A_OUT_H */ diff --git a/arch/avr32/include/asm/addrspace.h b/arch/avr32/include/asm/addrspace.h new file mode 100644 index 000000000000..366794858ec7 --- /dev/null +++ b/arch/avr32/include/asm/addrspace.h @@ -0,0 +1,43 @@ +/* + * Defitions for the address spaces of the AVR32 CPUs. Heavily based on + * include/asm-sh/addrspace.h + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_ADDRSPACE_H +#define __ASM_AVR32_ADDRSPACE_H + +#ifdef CONFIG_MMU + +/* Memory segments when segmentation is enabled */ +#define P0SEG 0x00000000 +#define P1SEG 0x80000000 +#define P2SEG 0xa0000000 +#define P3SEG 0xc0000000 +#define P4SEG 0xe0000000 + +/* Returns the privileged segment base of a given address */ +#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000) + +/* Returns the physical address of a PnSEG (n=1,2) address */ +#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) + +/* + * Map an address to a certain privileged segment + */ +#define P1SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \ + | P1SEG)) +#define P2SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \ + | P2SEG)) +#define P3SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \ + | P3SEG)) +#define P4SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \ + | P4SEG)) + +#endif /* CONFIG_MMU */ + +#endif /* __ASM_AVR32_ADDRSPACE_H */ diff --git a/arch/avr32/include/asm/asm.h b/arch/avr32/include/asm/asm.h new file mode 100644 index 000000000000..a2c64f404b98 --- /dev/null +++ b/arch/avr32/include/asm/asm.h @@ -0,0 +1,102 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_ASM_H__ +#define __ASM_AVR32_ASM_H__ + +#include +#include +#include + +#define mask_interrupts ssrf SYSREG_GM_OFFSET +#define mask_exceptions ssrf SYSREG_EM_OFFSET +#define unmask_interrupts csrf SYSREG_GM_OFFSET +#define unmask_exceptions csrf SYSREG_EM_OFFSET + +#ifdef CONFIG_FRAME_POINTER + .macro save_fp + st.w --sp, r7 + .endm + .macro restore_fp + ld.w r7, sp++ + .endm + .macro zero_fp + mov r7, 0 + .endm +#else + .macro save_fp + .endm + .macro restore_fp + .endm + .macro zero_fp + .endm +#endif + .macro get_thread_info reg + mov \reg, sp + andl \reg, ~(THREAD_SIZE - 1) & 0xffff + .endm + + /* Save and restore registers */ + .macro save_min sr, tmp=lr + pushm lr + mfsr \tmp, \sr + zero_fp + st.w --sp, \tmp + .endm + + .macro restore_min sr, tmp=lr + ld.w \tmp, sp++ + mtsr \sr, \tmp + popm lr + .endm + + .macro save_half sr, tmp=lr + save_fp + pushm r8-r9,r10,r11,r12,lr + zero_fp + mfsr \tmp, \sr + st.w --sp, \tmp + .endm + + .macro restore_half sr, tmp=lr + ld.w \tmp, sp++ + mtsr \sr, \tmp + popm r8-r9,r10,r11,r12,lr + restore_fp + .endm + + .macro save_full_user sr, tmp=lr + stmts --sp, r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,sp,lr + st.w --sp, lr + zero_fp + mfsr \tmp, \sr + st.w --sp, \tmp + .endm + + .macro restore_full_user sr, tmp=lr + ld.w \tmp, sp++ + mtsr \sr, \tmp + ld.w lr, sp++ + ldmts sp++, r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,sp,lr + .endm + + /* uaccess macros */ + .macro branch_if_kernel scratch, label + get_thread_info \scratch + ld.w \scratch, \scratch[TI_flags] + bld \scratch, TIF_USERSPACE + brcc \label + .endm + + .macro ret_if_privileged scratch, addr, size, ret + sub \scratch, \size, 1 + add \scratch, \addr + retcs \ret + retmi \ret + .endm + +#endif /* __ASM_AVR32_ASM_H__ */ diff --git a/arch/avr32/include/asm/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h new file mode 100644 index 000000000000..c2ea6e1c9aa1 --- /dev/null +++ b/arch/avr32/include/asm/atmel-mci.h @@ -0,0 +1,9 @@ +#ifndef __ASM_AVR32_ATMEL_MCI_H +#define __ASM_AVR32_ATMEL_MCI_H + +struct mci_platform_data { + int detect_pin; + int wp_pin; +}; + +#endif /* __ASM_AVR32_ATMEL_MCI_H */ diff --git a/arch/avr32/include/asm/atomic.h b/arch/avr32/include/asm/atomic.h new file mode 100644 index 000000000000..7ef3862a73d0 --- /dev/null +++ b/arch/avr32/include/asm/atomic.h @@ -0,0 +1,201 @@ +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc. + * + * But use these as seldom as possible since they are slower than + * regular operations. + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_ATOMIC_H +#define __ASM_AVR32_ATOMIC_H + +#include + +typedef struct { volatile int counter; } atomic_t; +#define ATOMIC_INIT(i) { (i) } + +#define atomic_read(v) ((v)->counter) +#define atomic_set(v, i) (((v)->counter) = i) + +/* + * atomic_sub_return - subtract the atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v. Returns the resulting value. + */ +static inline int atomic_sub_return(int i, atomic_t *v) +{ + int result; + + asm volatile( + "/* atomic_sub_return */\n" + "1: ssrf 5\n" + " ld.w %0, %2\n" + " sub %0, %3\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(result), "=o"(v->counter) + : "m"(v->counter), "rKs21"(i) + : "cc"); + + return result; +} + +/* + * atomic_add_return - add integer to atomic variable + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v. Returns the resulting value. + */ +static inline int atomic_add_return(int i, atomic_t *v) +{ + int result; + + if (__builtin_constant_p(i) && (i >= -1048575) && (i <= 1048576)) + result = atomic_sub_return(-i, v); + else + asm volatile( + "/* atomic_add_return */\n" + "1: ssrf 5\n" + " ld.w %0, %1\n" + " add %0, %3\n" + " stcond %2, %0\n" + " brne 1b" + : "=&r"(result), "=o"(v->counter) + : "m"(v->counter), "r"(i) + : "cc", "memory"); + + return result; +} + +/* + * atomic_sub_unless - sub unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * If the atomic value v is not equal to u, this function subtracts a + * from v, and returns non zero. If v is equal to u then it returns + * zero. This is done as an atomic operation. +*/ +static inline int atomic_sub_unless(atomic_t *v, int a, int u) +{ + int tmp, result = 0; + + asm volatile( + "/* atomic_sub_unless */\n" + "1: ssrf 5\n" + " ld.w %0, %3\n" + " cp.w %0, %5\n" + " breq 1f\n" + " sub %0, %4\n" + " stcond %2, %0\n" + " brne 1b\n" + " mov %1, 1\n" + "1:" + : "=&r"(tmp), "=&r"(result), "=o"(v->counter) + : "m"(v->counter), "rKs21"(a), "rKs21"(u), "1"(result) + : "cc", "memory"); + + return result; +} + +/* + * atomic_add_unless - add unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * If the atomic value v is not equal to u, this function adds a to v, + * and returns non zero. If v is equal to u then it returns zero. This + * is done as an atomic operation. +*/ +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int tmp, result; + + if (__builtin_constant_p(a) && (a >= -1048575) && (a <= 1048576)) + result = atomic_sub_unless(v, -a, u); + else { + result = 0; + asm volatile( + "/* atomic_add_unless */\n" + "1: ssrf 5\n" + " ld.w %0, %3\n" + " cp.w %0, %5\n" + " breq 1f\n" + " add %0, %4\n" + " stcond %2, %0\n" + " brne 1b\n" + " mov %1, 1\n" + "1:" + : "=&r"(tmp), "=&r"(result), "=o"(v->counter) + : "m"(v->counter), "r"(a), "ir"(u), "1"(result) + : "cc", "memory"); + } + + return result; +} + +/* + * atomic_sub_if_positive - conditionally subtract integer from atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically test @v and subtract @i if @v is greater or equal than @i. + * The function returns the old value of @v minus @i. + */ +static inline int atomic_sub_if_positive(int i, atomic_t *v) +{ + int result; + + asm volatile( + "/* atomic_sub_if_positive */\n" + "1: ssrf 5\n" + " ld.w %0, %2\n" + " sub %0, %3\n" + " brlt 1f\n" + " stcond %1, %0\n" + " brne 1b\n" + "1:" + : "=&r"(result), "=o"(v->counter) + : "m"(v->counter), "ir"(i) + : "cc", "memory"); + + return result; +} + +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) +#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) + +#define atomic_sub(i, v) (void)atomic_sub_return(i, v) +#define atomic_add(i, v) (void)atomic_add_return(i, v) +#define atomic_dec(v) atomic_sub(1, (v)) +#define atomic_inc(v) atomic_add(1, (v)) + +#define atomic_dec_return(v) atomic_sub_return(1, v) +#define atomic_inc_return(v) atomic_add_return(1, v) + +#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0) +#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0) +#define atomic_add_negative(i, v) (atomic_add_return(i, v) < 0) + +#define atomic_inc_not_zero(v) atomic_add_unless(v, 1, 0) +#define atomic_dec_if_positive(v) atomic_sub_if_positive(1, v) + +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include + +#endif /* __ASM_AVR32_ATOMIC_H */ diff --git a/arch/avr32/include/asm/auxvec.h b/arch/avr32/include/asm/auxvec.h new file mode 100644 index 000000000000..d5dd435bf8f4 --- /dev/null +++ b/arch/avr32/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __ASM_AVR32_AUXVEC_H +#define __ASM_AVR32_AUXVEC_H + +#endif /* __ASM_AVR32_AUXVEC_H */ diff --git a/arch/avr32/include/asm/bitops.h b/arch/avr32/include/asm/bitops.h new file mode 100644 index 000000000000..1a50b69b1a19 --- /dev/null +++ b/arch/avr32/include/asm/bitops.h @@ -0,0 +1,301 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_BITOPS_H +#define __ASM_AVR32_BITOPS_H + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#include +#include + +/* + * clear_bit() doesn't provide any barrier for the compiler + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +/* + * set_bit - Atomically set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * This function is atomic and may not be reordered. See __set_bit() + * if you do not require the atomic guarantees. + * + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static inline void set_bit(int nr, volatile void * addr) +{ + unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; + unsigned long tmp; + + if (__builtin_constant_p(nr)) { + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %2\n" + " sbr %0, %3\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p) + : "m"(*p), "i"(nr) + : "cc"); + } else { + unsigned long mask = 1UL << (nr % BITS_PER_LONG); + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %2\n" + " or %0, %3\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p) + : "m"(*p), "r"(mask) + : "cc"); + } +} + +/* + * clear_bit - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and may not be reordered. However, it does + * not contain a memory barrier, so if it is used for locking purposes, + * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * in order to ensure changes are visible on other processors. + */ +static inline void clear_bit(int nr, volatile void * addr) +{ + unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; + unsigned long tmp; + + if (__builtin_constant_p(nr)) { + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %2\n" + " cbr %0, %3\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p) + : "m"(*p), "i"(nr) + : "cc"); + } else { + unsigned long mask = 1UL << (nr % BITS_PER_LONG); + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %2\n" + " andn %0, %3\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p) + : "m"(*p), "r"(mask) + : "cc"); + } +} + +/* + * change_bit - Toggle a bit in memory + * @nr: Bit to change + * @addr: Address to start counting from + * + * change_bit() is atomic and may not be reordered. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static inline void change_bit(int nr, volatile void * addr) +{ + unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; + unsigned long mask = 1UL << (nr % BITS_PER_LONG); + unsigned long tmp; + + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %2\n" + " eor %0, %3\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p) + : "m"(*p), "r"(mask) + : "cc"); +} + +/* + * test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_set_bit(int nr, volatile void * addr) +{ + unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; + unsigned long mask = 1UL << (nr % BITS_PER_LONG); + unsigned long tmp, old; + + if (__builtin_constant_p(nr)) { + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %3\n" + " mov %2, %0\n" + " sbr %0, %4\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p), "=&r"(old) + : "m"(*p), "i"(nr) + : "memory", "cc"); + } else { + asm volatile( + "1: ssrf 5\n" + " ld.w %2, %3\n" + " or %0, %2, %4\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p), "=&r"(old) + : "m"(*p), "r"(mask) + : "memory", "cc"); + } + + return (old & mask) != 0; +} + +/* + * test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to clear + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_clear_bit(int nr, volatile void * addr) +{ + unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; + unsigned long mask = 1UL << (nr % BITS_PER_LONG); + unsigned long tmp, old; + + if (__builtin_constant_p(nr)) { + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %3\n" + " mov %2, %0\n" + " cbr %0, %4\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p), "=&r"(old) + : "m"(*p), "i"(nr) + : "memory", "cc"); + } else { + asm volatile( + "1: ssrf 5\n" + " ld.w %0, %3\n" + " mov %2, %0\n" + " andn %0, %4\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p), "=&r"(old) + : "m"(*p), "r"(mask) + : "memory", "cc"); + } + + return (old & mask) != 0; +} + +/* + * test_and_change_bit - Change a bit and return its old value + * @nr: Bit to change + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_change_bit(int nr, volatile void * addr) +{ + unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; + unsigned long mask = 1UL << (nr % BITS_PER_LONG); + unsigned long tmp, old; + + asm volatile( + "1: ssrf 5\n" + " ld.w %2, %3\n" + " eor %0, %2, %4\n" + " stcond %1, %0\n" + " brne 1b" + : "=&r"(tmp), "=o"(*p), "=&r"(old) + : "m"(*p), "r"(mask) + : "memory", "cc"); + + return (old & mask) != 0; +} + +#include + +/* Find First bit Set */ +static inline unsigned long __ffs(unsigned long word) +{ + unsigned long result; + + asm("brev %1\n\t" + "clz %0,%1" + : "=r"(result), "=&r"(word) + : "1"(word)); + return result; +} + +/* Find First Zero */ +static inline unsigned long ffz(unsigned long word) +{ + return __ffs(~word); +} + +/* Find Last bit Set */ +static inline int fls(unsigned long word) +{ + unsigned long result; + + asm("clz %0,%1" : "=r"(result) : "r"(word)); + return 32 - result; +} + +unsigned long find_first_zero_bit(const unsigned long *addr, + unsigned long size); +unsigned long find_next_zero_bit(const unsigned long *addr, + unsigned long size, + unsigned long offset); +unsigned long find_first_bit(const unsigned long *addr, + unsigned long size); +unsigned long find_next_bit(const unsigned long *addr, + unsigned long size, + unsigned long offset); + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + * + * The difference is that bit numbering starts at 1, and if no bit is set, + * the function returns 0. + */ +static inline int ffs(unsigned long word) +{ + if(word == 0) + return 0; + return __ffs(word) + 1; +} + +#include +#include +#include +#include + +#include +#include +#include + +#endif /* __ASM_AVR32_BITOPS_H */ diff --git a/arch/avr32/include/asm/bug.h b/arch/avr32/include/asm/bug.h new file mode 100644 index 000000000000..331d45bab18f --- /dev/null +++ b/arch/avr32/include/asm/bug.h @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_BUG_H +#define __ASM_AVR32_BUG_H + +#ifdef CONFIG_BUG + +/* + * According to our Chief Architect, this compact opcode is very + * unlikely to ever be implemented. + */ +#define AVR32_BUG_OPCODE 0x5df0 + +#ifdef CONFIG_DEBUG_BUGVERBOSE + +#define _BUG_OR_WARN(flags) \ + asm volatile( \ + "1: .hword %0\n" \ + " .section __bug_table,\"a\",@progbits\n" \ + "2: .long 1b\n" \ + " .long %1\n" \ + " .short %2\n" \ + " .short %3\n" \ + " .org 2b + %4\n" \ + " .previous" \ + : \ + : "i"(AVR32_BUG_OPCODE), "i"(__FILE__), \ + "i"(__LINE__), "i"(flags), \ + "i"(sizeof(struct bug_entry))) + +#else + +#define _BUG_OR_WARN(flags) \ + asm volatile( \ + "1: .hword %0\n" \ + " .section __bug_table,\"a\",@progbits\n" \ + "2: .long 1b\n" \ + " .short %1\n" \ + " .org 2b + %2\n" \ + " .previous" \ + : \ + : "i"(AVR32_BUG_OPCODE), "i"(flags), \ + "i"(sizeof(struct bug_entry))) + +#endif /* CONFIG_DEBUG_BUGVERBOSE */ + +#define BUG() \ + do { \ + _BUG_OR_WARN(0); \ + for (;;); \ + } while (0) + +#define WARN_ON(condition) \ + ({ \ + int __ret_warn_on = !!(condition); \ + if (unlikely(__ret_warn_on)) \ + _BUG_OR_WARN(BUGFLAG_WARNING); \ + unlikely(__ret_warn_on); \ + }) + +#define HAVE_ARCH_BUG +#define HAVE_ARCH_WARN_ON + +#endif /* CONFIG_BUG */ + +#include + +#endif /* __ASM_AVR32_BUG_H */ diff --git a/arch/avr32/include/asm/bugs.h b/arch/avr32/include/asm/bugs.h new file mode 100644 index 000000000000..7635e770622e --- /dev/null +++ b/arch/avr32/include/asm/bugs.h @@ -0,0 +1,15 @@ +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ +#ifndef __ASM_AVR32_BUGS_H +#define __ASM_AVR32_BUGS_H + +static void __init check_bugs(void) +{ + cpu_data->loops_per_jiffy = loops_per_jiffy; +} + +#endif /* __ASM_AVR32_BUGS_H */ diff --git a/arch/avr32/include/asm/byteorder.h b/arch/avr32/include/asm/byteorder.h new file mode 100644 index 000000000000..d77b48ba7338 --- /dev/null +++ b/arch/avr32/include/asm/byteorder.h @@ -0,0 +1,31 @@ +/* + * AVR32 endian-conversion functions. + */ +#ifndef __ASM_AVR32_BYTEORDER_H +#define __ASM_AVR32_BYTEORDER_H + +#include +#include + +#ifdef __CHECKER__ +extern unsigned long __builtin_bswap_32(unsigned long x); +extern unsigned short __builtin_bswap_16(unsigned short x); +#endif + +/* + * avr32-linux-gcc versions earlier than 4.2 improperly sign-extends + * the result. + */ +#if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2) +#define __arch__swab32(x) __builtin_bswap_32(x) +#define __arch__swab16(x) __builtin_bswap_16(x) +#endif + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#include + +#endif /* __ASM_AVR32_BYTEORDER_H */ diff --git a/arch/avr32/include/asm/cache.h b/arch/avr32/include/asm/cache.h new file mode 100644 index 000000000000..d3cf35ab11ab --- /dev/null +++ b/arch/avr32/include/asm/cache.h @@ -0,0 +1,38 @@ +#ifndef __ASM_AVR32_CACHE_H +#define __ASM_AVR32_CACHE_H + +#define L1_CACHE_SHIFT 5 +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +/* + * Memory returned by kmalloc() may be used for DMA, so we must make + * sure that all such allocations are cache aligned. Otherwise, + * unrelated code may cause parts of the buffer to be read into the + * cache before the transfer is done, causing old data to be seen by + * the CPU. + */ +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES + +#ifndef __ASSEMBLER__ +struct cache_info { + unsigned int ways; + unsigned int sets; + unsigned int linesz; +}; +#endif /* __ASSEMBLER */ + +/* Cache operation constants */ +#define ICACHE_FLUSH 0x00 +#define ICACHE_INVALIDATE 0x01 +#define ICACHE_LOCK 0x02 +#define ICACHE_UNLOCK 0x03 +#define ICACHE_PREFETCH 0x04 + +#define DCACHE_FLUSH 0x08 +#define DCACHE_LOCK 0x09 +#define DCACHE_UNLOCK 0x0a +#define DCACHE_INVALIDATE 0x0b +#define DCACHE_CLEAN 0x0c +#define DCACHE_CLEAN_INVAL 0x0d + +#endif /* __ASM_AVR32_CACHE_H */ diff --git a/arch/avr32/include/asm/cachectl.h b/arch/avr32/include/asm/cachectl.h new file mode 100644 index 000000000000..4faf1ce60061 --- /dev/null +++ b/arch/avr32/include/asm/cachectl.h @@ -0,0 +1,11 @@ +#ifndef __ASM_AVR32_CACHECTL_H +#define __ASM_AVR32_CACHECTL_H + +/* + * Operations that can be performed through the cacheflush system call + */ + +/* Clean the data cache, then invalidate the icache */ +#define CACHE_IFLUSH 0 + +#endif /* __ASM_AVR32_CACHECTL_H */ diff --git a/arch/avr32/include/asm/cacheflush.h b/arch/avr32/include/asm/cacheflush.h new file mode 100644 index 000000000000..670674749b20 --- /dev/null +++ b/arch/avr32/include/asm/cacheflush.h @@ -0,0 +1,131 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_CACHEFLUSH_H +#define __ASM_AVR32_CACHEFLUSH_H + +/* Keep includes the same across arches. */ +#include + +#define CACHE_OP_ICACHE_INVALIDATE 0x01 +#define CACHE_OP_DCACHE_INVALIDATE 0x0b +#define CACHE_OP_DCACHE_CLEAN 0x0c +#define CACHE_OP_DCACHE_CLEAN_INVAL 0x0d + +/* + * Invalidate any cacheline containing virtual address vaddr without + * writing anything back to memory. + * + * Note that this function may corrupt unrelated data structures when + * applied on buffers that are not cacheline aligned in both ends. + */ +static inline void invalidate_dcache_line(void *vaddr) +{ + asm volatile("cache %0[0], %1" + : + : "r"(vaddr), "n"(CACHE_OP_DCACHE_INVALIDATE) + : "memory"); +} + +/* + * Make sure any cacheline containing virtual address vaddr is written + * to memory. + */ +static inline void clean_dcache_line(void *vaddr) +{ + asm volatile("cache %0[0], %1" + : + : "r"(vaddr), "n"(CACHE_OP_DCACHE_CLEAN) + : "memory"); +} + +/* + * Make sure any cacheline containing virtual address vaddr is written + * to memory and then invalidate it. + */ +static inline void flush_dcache_line(void *vaddr) +{ + asm volatile("cache %0[0], %1" + : + : "r"(vaddr), "n"(CACHE_OP_DCACHE_CLEAN_INVAL) + : "memory"); +} + +/* + * Invalidate any instruction cacheline containing virtual address + * vaddr. + */ +static inline void invalidate_icache_line(void *vaddr) +{ + asm volatile("cache %0[0], %1" + : + : "r"(vaddr), "n"(CACHE_OP_ICACHE_INVALIDATE) + : "memory"); +} + +/* + * Applies the above functions on all lines that are touched by the + * specified virtual address range. + */ +void invalidate_dcache_region(void *start, size_t len); +void clean_dcache_region(void *start, size_t len); +void flush_dcache_region(void *start, size_t len); +void invalidate_icache_region(void *start, size_t len); + +/* + * Make sure any pending writes are completed before continuing. + */ +#define flush_write_buffer() asm volatile("sync 0" : : : "memory") + +/* + * The following functions are called when a virtual mapping changes. + * We do not need to flush anything in this case. + */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +/* + * I think we need to implement this one to be able to reliably + * execute pages from RAMDISK. However, if we implement the + * flush_dcache_*() functions, it might not be needed anymore. + * + * #define flush_icache_page(vma, page) do { } while (0) + */ +extern void flush_icache_page(struct vm_area_struct *vma, struct page *page); + +/* + * These are (I think) related to D-cache aliasing. We might need to + * do something here, but only for certain configurations. No such + * configurations exist at this time. + */ +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(page) do { } while (0) +#define flush_dcache_mmap_unlock(page) do { } while (0) + +/* + * These are for I/D cache coherency. In this case, we do need to + * flush with all configurations. + */ +extern void flush_icache_range(unsigned long start, unsigned long end); + +extern void copy_to_user_page(struct vm_area_struct *vma, struct page *page, + unsigned long vaddr, void *dst, const void *src, + unsigned long len); + +static inline void copy_from_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, + const void *src, unsigned long len) +{ + memcpy(dst, src, len); +} + +#endif /* __ASM_AVR32_CACHEFLUSH_H */ diff --git a/arch/avr32/include/asm/checksum.h b/arch/avr32/include/asm/checksum.h new file mode 100644 index 000000000000..4ddbfd2486af --- /dev/null +++ b/arch/avr32/include/asm/checksum.h @@ -0,0 +1,152 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_CHECKSUM_H +#define __ASM_AVR32_CHECKSUM_H + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums, and handles user-space pointer exceptions correctly, when needed. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ +__wsum csum_partial_copy_generic(const void *src, void *dst, int len, + __wsum sum, int *src_err_ptr, + int *dst_err_ptr); + +/* + * Note: when you get a NULL pointer exception here this means someone + * passed in an incorrect kernel address to one of these functions. + * + * If you use these functions directly please don't forget the + * access_ok(). + */ +static inline +__wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum) +{ + return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL); +} + +static inline +__wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *err_ptr) +{ + return csum_partial_copy_generic((const void __force *)src, dst, len, + sum, err_ptr, NULL); +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + unsigned int sum, tmp; + + __asm__ __volatile__( + " ld.w %0, %1++\n" + " ld.w %3, %1++\n" + " sub %2, 4\n" + " add %0, %3\n" + " ld.w %3, %1++\n" + " adc %0, %0, %3\n" + " ld.w %3, %1++\n" + " adc %0, %0, %3\n" + " acr %0\n" + "1: ld.w %3, %1++\n" + " add %0, %3\n" + " acr %0\n" + " sub %2, 1\n" + " brne 1b\n" + " lsl %3, %0, 16\n" + " andl %0, 0\n" + " mov %2, 0xffff\n" + " add %0, %3\n" + " adc %0, %0, %2\n" + " com %0\n" + " lsr %0, 16\n" + : "=r"(sum), "=r"(iph), "=r"(ihl), "=r"(tmp) + : "1"(iph), "2"(ihl) + : "memory", "cc"); + return (__force __sum16)sum; +} + +/* + * Fold a partial checksum + */ + +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int tmp; + + asm(" bfextu %1, %0, 0, 16\n" + " lsr %0, 16\n" + " add %0, %1\n" + " bfextu %1, %0, 16, 16\n" + " add %0, %1" + : "=&r"(sum), "=&r"(tmp) + : "0"(sum)); + + return (__force __sum16)~sum; +} + +static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + asm(" add %0, %1\n" + " adc %0, %0, %2\n" + " adc %0, %0, %3\n" + " acr %0" + : "=r"(sum) + : "r"(daddr), "r"(saddr), "r"(len + proto), + "0"(sum) + : "cc"); + + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#endif /* __ASM_AVR32_CHECKSUM_H */ diff --git a/arch/avr32/include/asm/cputime.h b/arch/avr32/include/asm/cputime.h new file mode 100644 index 000000000000..e87e0f81cbeb --- /dev/null +++ b/arch/avr32/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_CPUTIME_H +#define __ASM_AVR32_CPUTIME_H + +#include + +#endif /* __ASM_AVR32_CPUTIME_H */ diff --git a/arch/avr32/include/asm/current.h b/arch/avr32/include/asm/current.h new file mode 100644 index 000000000000..c7b0549eab8a --- /dev/null +++ b/arch/avr32/include/asm/current.h @@ -0,0 +1,15 @@ +#ifndef __ASM_AVR32_CURRENT_H +#define __ASM_AVR32_CURRENT_H + +#include + +struct task_struct; + +inline static struct task_struct * get_current(void) +{ + return current_thread_info()->task; +} + +#define current get_current() + +#endif /* __ASM_AVR32_CURRENT_H */ diff --git a/arch/avr32/include/asm/delay.h b/arch/avr32/include/asm/delay.h new file mode 100644 index 000000000000..a0ed9a9839a5 --- /dev/null +++ b/arch/avr32/include/asm/delay.h @@ -0,0 +1,26 @@ +#ifndef __ASM_AVR32_DELAY_H +#define __ASM_AVR32_DELAY_H + +/* + * Copyright (C) 1993 Linus Torvalds + * + * Delay routines calling functions in arch/avr32/lib/delay.c + */ + +extern void __bad_udelay(void); +extern void __bad_ndelay(void); + +extern void __udelay(unsigned long usecs); +extern void __ndelay(unsigned long nsecs); +extern void __const_udelay(unsigned long xloops); +extern void __delay(unsigned long loops); + +#define udelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \ + __udelay(n)) + +#define ndelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \ + __ndelay(n)) + +#endif /* __ASM_AVR32_DELAY_H */ diff --git a/arch/avr32/include/asm/device.h b/arch/avr32/include/asm/device.h new file mode 100644 index 000000000000..d8f9872b0e2d --- /dev/null +++ b/arch/avr32/include/asm/device.h @@ -0,0 +1,7 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include + diff --git a/arch/avr32/include/asm/div64.h b/arch/avr32/include/asm/div64.h new file mode 100644 index 000000000000..d7ddd4fdeca6 --- /dev/null +++ b/arch/avr32/include/asm/div64.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_DIV64_H +#define __ASM_AVR32_DIV64_H + +#include + +#endif /* __ASM_AVR32_DIV64_H */ diff --git a/arch/avr32/include/asm/dma-mapping.h b/arch/avr32/include/asm/dma-mapping.h new file mode 100644 index 000000000000..0399359ab5d8 --- /dev/null +++ b/arch/avr32/include/asm/dma-mapping.h @@ -0,0 +1,349 @@ +#ifndef __ASM_AVR32_DMA_MAPPING_H +#define __ASM_AVR32_DMA_MAPPING_H + +#include +#include +#include +#include +#include +#include + +extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + int direction); + +/* + * Return whether the given device DMA address mask can be supported + * properly. For example, if your device can only drive the low 24-bits + * during bus mastering, then you would pass 0x00ffffff as the mask + * to this function. + */ +static inline int dma_supported(struct device *dev, u64 mask) +{ + /* Fix when needed. I really don't know of any limitations */ + return 1; +} + +static inline int dma_set_mask(struct device *dev, u64 dma_mask) +{ + if (!dev->dma_mask || !dma_supported(dev, dma_mask)) + return -EIO; + + *dev->dma_mask = dma_mask; + return 0; +} + +/* + * dma_map_single can't fail as it is implemented now. + */ +static inline int dma_mapping_error(struct device *dev, dma_addr_t addr) +{ + return 0; +} + +/** + * dma_alloc_coherent - allocate consistent memory for DMA + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @size: required memory size + * @handle: bus-specific DMA address + * + * Allocate some uncached, unbuffered memory for a device for + * performing DMA. This function allocates pages, and will + * return the CPU-viewed address, and sets @handle to be the + * device-viewed address. + */ +extern void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t gfp); + +/** + * dma_free_coherent - free memory allocated by dma_alloc_coherent + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @size: size of memory originally requested in dma_alloc_coherent + * @cpu_addr: CPU-view address returned from dma_alloc_coherent + * @handle: device-view address returned from dma_alloc_coherent + * + * Free (and unmap) a DMA buffer previously allocated by + * dma_alloc_coherent(). + * + * References to memory and mappings associated with cpu_addr/handle + * during and after this call executing are illegal. + */ +extern void dma_free_coherent(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t handle); + +/** + * dma_alloc_writecombine - allocate write-combining memory for DMA + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @size: required memory size + * @handle: bus-specific DMA address + * + * Allocate some uncached, buffered memory for a device for + * performing DMA. This function allocates pages, and will + * return the CPU-viewed address, and sets @handle to be the + * device-viewed address. + */ +extern void *dma_alloc_writecombine(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t gfp); + +/** + * dma_free_coherent - free memory allocated by dma_alloc_writecombine + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @size: size of memory originally requested in dma_alloc_writecombine + * @cpu_addr: CPU-view address returned from dma_alloc_writecombine + * @handle: device-view address returned from dma_alloc_writecombine + * + * Free (and unmap) a DMA buffer previously allocated by + * dma_alloc_writecombine(). + * + * References to memory and mappings associated with cpu_addr/handle + * during and after this call executing are illegal. + */ +extern void dma_free_writecombine(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t handle); + +/** + * dma_map_single - map a single buffer for streaming DMA + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @cpu_addr: CPU direct mapped address of buffer + * @size: size of buffer to map + * @dir: DMA transfer direction + * + * Ensure that any data held in the cache is appropriately discarded + * or written back. + * + * The device owns this memory once this call has completed. The CPU + * can regain ownership by calling dma_unmap_single() or dma_sync_single(). + */ +static inline dma_addr_t +dma_map_single(struct device *dev, void *cpu_addr, size_t size, + enum dma_data_direction direction) +{ + dma_cache_sync(dev, cpu_addr, size, direction); + return virt_to_bus(cpu_addr); +} + +/** + * dma_unmap_single - unmap a single buffer previously mapped + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @handle: DMA address of buffer + * @size: size of buffer to map + * @dir: DMA transfer direction + * + * Unmap a single streaming mode DMA translation. The handle and size + * must match what was provided in the previous dma_map_single() call. + * All other usages are undefined. + * + * After this call, reads by the CPU to the buffer are guaranteed to see + * whatever the device wrote there. + */ +static inline void +dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + +} + +/** + * dma_map_page - map a portion of a page for streaming DMA + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @page: page that buffer resides in + * @offset: offset into page for start of buffer + * @size: size of buffer to map + * @dir: DMA transfer direction + * + * Ensure that any data held in the cache is appropriately discarded + * or written back. + * + * The device owns this memory once this call has completed. The CPU + * can regain ownership by calling dma_unmap_page() or dma_sync_single(). + */ +static inline dma_addr_t +dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + return dma_map_single(dev, page_address(page) + offset, + size, direction); +} + +/** + * dma_unmap_page - unmap a buffer previously mapped through dma_map_page() + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @handle: DMA address of buffer + * @size: size of buffer to map + * @dir: DMA transfer direction + * + * Unmap a single streaming mode DMA translation. The handle and size + * must match what was provided in the previous dma_map_single() call. + * All other usages are undefined. + * + * After this call, reads by the CPU to the buffer are guaranteed to see + * whatever the device wrote there. + */ +static inline void +dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + dma_unmap_single(dev, dma_address, size, direction); +} + +/** + * dma_map_sg - map a set of SG buffers for streaming mode DMA + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @sg: list of buffers + * @nents: number of buffers to map + * @dir: DMA transfer direction + * + * Map a set of buffers described by scatterlist in streaming + * mode for DMA. This is the scatter-gather version of the + * above pci_map_single interface. Here the scatter gather list + * elements are each tagged with the appropriate dma address + * and length. They are obtained via sg_dma_{address,length}(SG). + * + * NOTE: An implementation may be able to use a smaller number of + * DMA address/length pairs than there are SG table elements. + * (for example via virtual mapping capabilities) + * The routine returns the number of addr/length pairs actually + * used, at most nents. + * + * Device ownership issues as mentioned above for pci_map_single are + * the same here. + */ +static inline int +dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + int i; + + for (i = 0; i < nents; i++) { + char *virt; + + sg[i].dma_address = page_to_bus(sg_page(&sg[i])) + sg[i].offset; + virt = sg_virt(&sg[i]); + dma_cache_sync(dev, virt, sg[i].length, direction); + } + + return nents; +} + +/** + * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @sg: list of buffers + * @nents: number of buffers to map + * @dir: DMA transfer direction + * + * Unmap a set of streaming mode DMA translations. + * Again, CPU read rules concerning calls here are the same as for + * pci_unmap_single() above. + */ +static inline void +dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + +} + +/** + * dma_sync_single_for_cpu + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @handle: DMA address of buffer + * @size: size of buffer to map + * @dir: DMA transfer direction + * + * Make physical memory consistent for a single streaming mode DMA + * translation after a transfer. + * + * If you perform a dma_map_single() but wish to interrogate the + * buffer using the cpu, yet do not wish to teardown the DMA mapping, + * you must call this function before doing so. At the next point you + * give the DMA address back to the card, you must first perform a + * dma_sync_single_for_device, and then the device again owns the + * buffer. + */ +static inline void +dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ + /* + * No need to do anything since the CPU isn't supposed to + * touch this memory after we flushed it at mapping- or + * sync-for-device time. + */ +} + +static inline void +dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ + dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction); +} + +static inline void +dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + /* just sync everything, that's all the pci API can do */ + dma_sync_single_for_cpu(dev, dma_handle, offset+size, direction); +} + +static inline void +dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + /* just sync everything, that's all the pci API can do */ + dma_sync_single_for_device(dev, dma_handle, offset+size, direction); +} + +/** + * dma_sync_sg_for_cpu + * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices + * @sg: list of buffers + * @nents: number of buffers to map + * @dir: DMA transfer direction + * + * Make physical memory consistent for a set of streaming + * mode DMA translations after a transfer. + * + * The same as dma_sync_single_for_* but for a scatter-gather list, + * same rules and usage. + */ +static inline void +dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + /* + * No need to do anything since the CPU isn't supposed to + * touch this memory after we flushed it at mapping- or + * sync-for-device time. + */ +} + +static inline void +dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + int i; + + for (i = 0; i < nents; i++) { + dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, direction); + } +} + +/* Now for the API extensions over the pci_ one */ + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) + +static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) +{ + return 1; +} + +static inline int dma_get_cache_alignment(void) +{ + return boot_cpu_data.dcache.linesz; +} + +#endif /* __ASM_AVR32_DMA_MAPPING_H */ diff --git a/arch/avr32/include/asm/dma.h b/arch/avr32/include/asm/dma.h new file mode 100644 index 000000000000..9e91205590ac --- /dev/null +++ b/arch/avr32/include/asm/dma.h @@ -0,0 +1,8 @@ +#ifndef __ASM_AVR32_DMA_H +#define __ASM_AVR32_DMA_H + +/* The maximum address that we can perform a DMA transfer to on this platform. + * Not really applicable to AVR32, but some functions need it. */ +#define MAX_DMA_ADDRESS 0xffffffff + +#endif /* __ASM_AVR32_DMA_H */ diff --git a/arch/avr32/include/asm/elf.h b/arch/avr32/include/asm/elf.h new file mode 100644 index 000000000000..64ce40ee1d58 --- /dev/null +++ b/arch/avr32/include/asm/elf.h @@ -0,0 +1,108 @@ +#ifndef __ASM_AVR32_ELF_H +#define __ASM_AVR32_ELF_H + +/* AVR32 relocation numbers */ +#define R_AVR32_NONE 0 +#define R_AVR32_32 1 +#define R_AVR32_16 2 +#define R_AVR32_8 3 +#define R_AVR32_32_PCREL 4 +#define R_AVR32_16_PCREL 5 +#define R_AVR32_8_PCREL 6 +#define R_AVR32_DIFF32 7 +#define R_AVR32_DIFF16 8 +#define R_AVR32_DIFF8 9 +#define R_AVR32_GOT32 10 +#define R_AVR32_GOT16 11 +#define R_AVR32_GOT8 12 +#define R_AVR32_21S 13 +#define R_AVR32_16U 14 +#define R_AVR32_16S 15 +#define R_AVR32_8S 16 +#define R_AVR32_8S_EXT 17 +#define R_AVR32_22H_PCREL 18 +#define R_AVR32_18W_PCREL 19 +#define R_AVR32_16B_PCREL 20 +#define R_AVR32_16N_PCREL 21 +#define R_AVR32_14UW_PCREL 22 +#define R_AVR32_11H_PCREL 23 +#define R_AVR32_10UW_PCREL 24 +#define R_AVR32_9H_PCREL 25 +#define R_AVR32_9UW_PCREL 26 +#define R_AVR32_HI16 27 +#define R_AVR32_LO16 28 +#define R_AVR32_GOTPC 29 +#define R_AVR32_GOTCALL 30 +#define R_AVR32_LDA_GOT 31 +#define R_AVR32_GOT21S 32 +#define R_AVR32_GOT18SW 33 +#define R_AVR32_GOT16S 34 +#define R_AVR32_GOT7UW 35 +#define R_AVR32_32_CPENT 36 +#define R_AVR32_CPCALL 37 +#define R_AVR32_16_CP 38 +#define R_AVR32_9W_CP 39 +#define R_AVR32_RELATIVE 40 +#define R_AVR32_GLOB_DAT 41 +#define R_AVR32_JMP_SLOT 42 +#define R_AVR32_ALIGN 43 + +/* + * ELF register definitions.. + */ + +#include +#include + +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof (struct pt_regs) / sizeof (elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_fpu_struct elf_fpregset_t; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ( (x)->e_machine == EM_AVR32 ) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#ifdef __LITTLE_ENDIAN__ +#define ELF_DATA ELFDATA2LSB +#else +#define ELF_DATA ELFDATA2MSB +#endif +#define ELF_ARCH EM_AVR32 + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE 4096 + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) + + +/* This yields a mask that user programs can use to figure out what + instruction set this CPU supports. This could be done in user space, + but it's not easy, and we've already done it here. */ + +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. + + For the moment, we have only optimizations for the Intel generations, + but that could change... */ + +#define ELF_PLATFORM (NULL) + +#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) + +#endif /* __ASM_AVR32_ELF_H */ diff --git a/arch/avr32/include/asm/emergency-restart.h b/arch/avr32/include/asm/emergency-restart.h new file mode 100644 index 000000000000..3e7e014776ba --- /dev/null +++ b/arch/avr32/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_EMERGENCY_RESTART_H +#define __ASM_AVR32_EMERGENCY_RESTART_H + +#include + +#endif /* __ASM_AVR32_EMERGENCY_RESTART_H */ diff --git a/arch/avr32/include/asm/errno.h b/arch/avr32/include/asm/errno.h new file mode 100644 index 000000000000..558a7249f06d --- /dev/null +++ b/arch/avr32/include/asm/errno.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_ERRNO_H +#define __ASM_AVR32_ERRNO_H + +#include + +#endif /* __ASM_AVR32_ERRNO_H */ diff --git a/arch/avr32/include/asm/fb.h b/arch/avr32/include/asm/fb.h new file mode 100644 index 000000000000..41baf84ad402 --- /dev/null +++ b/arch/avr32/include/asm/fb.h @@ -0,0 +1,21 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include +#include +#include + +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + vma->vm_page_prot = __pgprot((pgprot_val(vma->vm_page_prot) + & ~_PAGE_CACHABLE) + | (_PAGE_BUFFER | _PAGE_DIRTY)); +} + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/avr32/include/asm/fcntl.h b/arch/avr32/include/asm/fcntl.h new file mode 100644 index 000000000000..14c0c4402b11 --- /dev/null +++ b/arch/avr32/include/asm/fcntl.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_FCNTL_H +#define __ASM_AVR32_FCNTL_H + +#include + +#endif /* __ASM_AVR32_FCNTL_H */ diff --git a/arch/avr32/include/asm/futex.h b/arch/avr32/include/asm/futex.h new file mode 100644 index 000000000000..10419f14a68a --- /dev/null +++ b/arch/avr32/include/asm/futex.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_FUTEX_H +#define __ASM_AVR32_FUTEX_H + +#include + +#endif /* __ASM_AVR32_FUTEX_H */ diff --git a/arch/avr32/include/asm/gpio.h b/arch/avr32/include/asm/gpio.h new file mode 100644 index 000000000000..19e8ccc77db3 --- /dev/null +++ b/arch/avr32/include/asm/gpio.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_GPIO_H +#define __ASM_AVR32_GPIO_H + +#include + +#endif /* __ASM_AVR32_GPIO_H */ diff --git a/arch/avr32/include/asm/hardirq.h b/arch/avr32/include/asm/hardirq.h new file mode 100644 index 000000000000..267354356f60 --- /dev/null +++ b/arch/avr32/include/asm/hardirq.h @@ -0,0 +1,34 @@ +#ifndef __ASM_AVR32_HARDIRQ_H +#define __ASM_AVR32_HARDIRQ_H + +#include +#include + +#ifndef __ASSEMBLY__ + +#include + +/* entry.S is sensitive to the offsets of these fields */ +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +void ack_bad_irq(unsigned int irq); + +/* Standard mappings for irq_cpustat_t above */ +#include + +#endif /* __ASSEMBLY__ */ + +#define HARDIRQ_BITS 12 + +/* + * The hardirq mask has to be large enough to have + * space for potentially all IRQ sources in the system + * nesting on a single CPU: + */ +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +#endif /* __ASM_AVR32_HARDIRQ_H */ diff --git a/arch/avr32/include/asm/hw_irq.h b/arch/avr32/include/asm/hw_irq.h new file mode 100644 index 000000000000..218b0a6bfd1b --- /dev/null +++ b/arch/avr32/include/asm/hw_irq.h @@ -0,0 +1,9 @@ +#ifndef __ASM_AVR32_HW_IRQ_H +#define __ASM_AVR32_HW_IRQ_H + +static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) +{ + /* Nothing to do */ +} + +#endif /* __ASM_AVR32_HW_IRQ_H */ diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h new file mode 100644 index 000000000000..8be7ea9c9047 --- /dev/null +++ b/arch/avr32/include/asm/io.h @@ -0,0 +1,312 @@ +#ifndef __ASM_AVR32_IO_H +#define __ASM_AVR32_IO_H + +#include +#include +#include + +#include +#include + +#include + +/* virt_to_phys will only work when address is in P1 or P2 */ +static __inline__ unsigned long virt_to_phys(volatile void *address) +{ + return PHYSADDR(address); +} + +static __inline__ void * phys_to_virt(unsigned long address) +{ + return (void *)P1SEGADDR(address); +} + +#define cached_to_phys(addr) ((unsigned long)PHYSADDR(addr)) +#define uncached_to_phys(addr) ((unsigned long)PHYSADDR(addr)) +#define phys_to_cached(addr) ((void *)P1SEGADDR(addr)) +#define phys_to_uncached(addr) ((void *)P2SEGADDR(addr)) + +/* + * Generic IO read/write. These perform native-endian accesses. Note + * that some architectures will want to re-define __raw_{read,write}w. + */ +extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen); +extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen); +extern void __raw_writesl(void __iomem *addr, const void *data, int longlen); + +extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen); +extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen); +extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); + +static inline void __raw_writeb(u8 v, volatile void __iomem *addr) +{ + *(volatile u8 __force *)addr = v; +} +static inline void __raw_writew(u16 v, volatile void __iomem *addr) +{ + *(volatile u16 __force *)addr = v; +} +static inline void __raw_writel(u32 v, volatile void __iomem *addr) +{ + *(volatile u32 __force *)addr = v; +} + +static inline u8 __raw_readb(const volatile void __iomem *addr) +{ + return *(const volatile u8 __force *)addr; +} +static inline u16 __raw_readw(const volatile void __iomem *addr) +{ + return *(const volatile u16 __force *)addr; +} +static inline u32 __raw_readl(const volatile void __iomem *addr) +{ + return *(const volatile u32 __force *)addr; +} + +/* Convert I/O port address to virtual address */ +#ifndef __io +# define __io(p) ((void *)phys_to_uncached(p)) +#endif + +/* + * Not really sure about the best way to slow down I/O on + * AVR32. Defining it as a no-op until we have an actual test case. + */ +#define SLOW_DOWN_IO do { } while (0) + +#define __BUILD_MEMORY_SINGLE(pfx, bwl, type) \ +static inline void \ +pfx##write##bwl(type val, volatile void __iomem *addr) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \ + __val = pfx##ioswab##bwl(__addr, val); \ + \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + *__addr = __val; \ +} \ + \ +static inline type pfx##read##bwl(const volatile void __iomem *addr) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \ + \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + __val = *__addr; \ + return pfx##ioswab##bwl(__addr, __val); \ +} + +#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow) \ +static inline void pfx##out##bwl##p(type val, unsigned long port) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = __io(__swizzle_addr_##bwl(port)); \ + __val = pfx##ioswab##bwl(__addr, val); \ + \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + *__addr = __val; \ + slow; \ +} \ + \ +static inline type pfx##in##bwl##p(unsigned long port) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = __io(__swizzle_addr_##bwl(port)); \ + \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + __val = *__addr; \ + slow; \ + \ + return pfx##ioswab##bwl(__addr, __val); \ +} + +#define __BUILD_MEMORY_PFX(bus, bwl, type) \ + __BUILD_MEMORY_SINGLE(bus, bwl, type) + +#define BUILDIO_MEM(bwl, type) \ + __BUILD_MEMORY_PFX(, bwl, type) \ + __BUILD_MEMORY_PFX(__mem_, bwl, type) + +#define __BUILD_IOPORT_PFX(bus, bwl, type) \ + __BUILD_IOPORT_SINGLE(bus, bwl, type, ,) \ + __BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO) + +#define BUILDIO_IOPORT(bwl, type) \ + __BUILD_IOPORT_PFX(, bwl, type) \ + __BUILD_IOPORT_PFX(__mem_, bwl, type) + +BUILDIO_MEM(b, u8) +BUILDIO_MEM(w, u16) +BUILDIO_MEM(l, u32) + +BUILDIO_IOPORT(b, u8) +BUILDIO_IOPORT(w, u16) +BUILDIO_IOPORT(l, u32) + +#define readb_relaxed readb +#define readw_relaxed readw +#define readl_relaxed readl + +#define __BUILD_MEMORY_STRING(bwl, type) \ +static inline void writes##bwl(volatile void __iomem *addr, \ + const void *data, unsigned int count) \ +{ \ + const type *__data = data; \ + \ + while (count--) \ + __mem_write##bwl(*__data++, addr); \ +} \ + \ +static inline void reads##bwl(const volatile void __iomem *addr, \ + void *data, unsigned int count) \ +{ \ + type *__data = data; \ + \ + while (count--) \ + *__data++ = __mem_read##bwl(addr); \ +} + +#define __BUILD_IOPORT_STRING(bwl, type) \ +static inline void outs##bwl(unsigned long port, const void *data, \ + unsigned int count) \ +{ \ + const type *__data = data; \ + \ + while (count--) \ + __mem_out##bwl(*__data++, port); \ +} \ + \ +static inline void ins##bwl(unsigned long port, void *data, \ + unsigned int count) \ +{ \ + type *__data = data; \ + \ + while (count--) \ + *__data++ = __mem_in##bwl(port); \ +} + +#define BUILDSTRING(bwl, type) \ + __BUILD_MEMORY_STRING(bwl, type) \ + __BUILD_IOPORT_STRING(bwl, type) + +BUILDSTRING(b, u8) +BUILDSTRING(w, u16) +BUILDSTRING(l, u32) + +/* + * io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be + */ +#ifndef ioread8 + +#define ioread8(p) ((unsigned int)readb(p)) + +#define ioread16(p) ((unsigned int)readw(p)) +#define ioread16be(p) ((unsigned int)__raw_readw(p)) + +#define ioread32(p) ((unsigned int)readl(p)) +#define ioread32be(p) ((unsigned int)__raw_readl(p)) + +#define iowrite8(v,p) writeb(v, p) + +#define iowrite16(v,p) writew(v, p) +#define iowrite16be(v,p) __raw_writew(v, p) + +#define iowrite32(v,p) writel(v, p) +#define iowrite32be(v,p) __raw_writel(v, p) + +#define ioread8_rep(p,d,c) readsb(p,d,c) +#define ioread16_rep(p,d,c) readsw(p,d,c) +#define ioread32_rep(p,d,c) readsl(p,d,c) + +#define iowrite8_rep(p,s,c) writesb(p,s,c) +#define iowrite16_rep(p,s,c) writesw(p,s,c) +#define iowrite32_rep(p,s,c) writesl(p,s,c) + +#endif + +static inline void memcpy_fromio(void * to, const volatile void __iomem *from, + unsigned long count) +{ + memcpy(to, (const void __force *)from, count); +} + +static inline void memcpy_toio(volatile void __iomem *to, const void * from, + unsigned long count) +{ + memcpy((void __force *)to, from, count); +} + +static inline void memset_io(volatile void __iomem *addr, unsigned char val, + unsigned long count) +{ + memset((void __force *)addr, val, count); +} + +#define mmiowb() + +#define IO_SPACE_LIMIT 0xffffffff + +extern void __iomem *__ioremap(unsigned long offset, size_t size, + unsigned long flags); +extern void __iounmap(void __iomem *addr); + +/* + * ioremap - map bus memory into CPU space + * @offset bus address of the memory + * @size size of the resource to map + * + * ioremap performs a platform specific sequence of operations to make + * bus memory CPU accessible via the readb/.../writel functions and + * the other mmio helpers. The returned address is not guaranteed to + * be usable directly as a virtual address. + */ +#define ioremap(offset, size) \ + __ioremap((offset), (size), 0) + +#define ioremap_nocache(offset, size) \ + __ioremap((offset), (size), 0) + +#define iounmap(addr) \ + __iounmap(addr) + +#define cached(addr) P1SEGADDR(addr) +#define uncached(addr) P2SEGADDR(addr) + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt +#define page_to_bus page_to_phys +#define bus_to_page phys_to_page + +/* + * Create a virtual mapping cookie for an IO port range. There exists + * no such thing as port-based I/O on AVR32, so a regular ioremap() + * should do what we need. + */ +#define ioport_map(port, nr) ioremap(port, nr) +#define ioport_unmap(port) iounmap(port) + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __ASM_AVR32_IO_H */ diff --git a/arch/avr32/include/asm/ioctl.h b/arch/avr32/include/asm/ioctl.h new file mode 100644 index 000000000000..c8472c1398ef --- /dev/null +++ b/arch/avr32/include/asm/ioctl.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_IOCTL_H +#define __ASM_AVR32_IOCTL_H + +#include + +#endif /* __ASM_AVR32_IOCTL_H */ diff --git a/arch/avr32/include/asm/ioctls.h b/arch/avr32/include/asm/ioctls.h new file mode 100644 index 000000000000..0cf2c0a4502b --- /dev/null +++ b/arch/avr32/include/asm/ioctls.h @@ -0,0 +1,87 @@ +#ifndef __ASM_AVR32_IOCTLS_H +#define __ASM_AVR32_IOCTLS_H + +#include + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */ +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ +#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ +#define FIOQSIZE 0x5460 + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* __ASM_AVR32_IOCTLS_H */ diff --git a/arch/avr32/include/asm/ipcbuf.h b/arch/avr32/include/asm/ipcbuf.h new file mode 100644 index 000000000000..1552c9698f5e --- /dev/null +++ b/arch/avr32/include/asm/ipcbuf.h @@ -0,0 +1,29 @@ +#ifndef __ASM_AVR32_IPCBUF_H +#define __ASM_AVR32_IPCBUF_H + +/* +* The user_ipc_perm structure for AVR32 architecture. +* Note extra padding because this structure is passed back and forth +* between kernel and user space. +* +* Pad space is left for: +* - 32-bit mode_t and seq +* - 2 miscellaneous 32-bit values +*/ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __ASM_AVR32_IPCBUF_H */ diff --git a/arch/avr32/include/asm/irq.h b/arch/avr32/include/asm/irq.h new file mode 100644 index 000000000000..c563b7720c1a --- /dev/null +++ b/arch/avr32/include/asm/irq.h @@ -0,0 +1,24 @@ +#ifndef __ASM_AVR32_IRQ_H +#define __ASM_AVR32_IRQ_H + +#define NR_INTERNAL_IRQS 64 + +#include + +#ifndef NR_IRQS +#define NR_IRQS (NR_INTERNAL_IRQS) +#endif + +#define irq_canonicalize(i) (i) + +#ifndef __ASSEMBLER__ +int nmi_enable(void); +void nmi_disable(void); + +/* + * Returns a bitmask of pending interrupts in a group. + */ +extern unsigned long intc_get_pending(unsigned int group); +#endif + +#endif /* __ASM_AVR32_IOCTLS_H */ diff --git a/arch/avr32/include/asm/irq_regs.h b/arch/avr32/include/asm/irq_regs.h new file mode 100644 index 000000000000..3dd9c0b70270 --- /dev/null +++ b/arch/avr32/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include diff --git a/arch/avr32/include/asm/irqflags.h b/arch/avr32/include/asm/irqflags.h new file mode 100644 index 000000000000..93570daac38a --- /dev/null +++ b/arch/avr32/include/asm/irqflags.h @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_IRQFLAGS_H +#define __ASM_AVR32_IRQFLAGS_H + +#include + +static inline unsigned long __raw_local_save_flags(void) +{ + return sysreg_read(SR); +} + +#define raw_local_save_flags(x) \ + do { (x) = __raw_local_save_flags(); } while (0) + +/* + * This will restore ALL status register flags, not only the interrupt + * mask flag. + * + * The empty asm statement informs the compiler of this fact while + * also serving as a barrier. + */ +static inline void raw_local_irq_restore(unsigned long flags) +{ + sysreg_write(SR, flags); + asm volatile("" : : : "memory", "cc"); +} + +static inline void raw_local_irq_disable(void) +{ + asm volatile("ssrf %0" : : "n"(SYSREG_GM_OFFSET) : "memory"); +} + +static inline void raw_local_irq_enable(void) +{ + asm volatile("csrf %0" : : "n"(SYSREG_GM_OFFSET) : "memory"); +} + +static inline int raw_irqs_disabled_flags(unsigned long flags) +{ + return (flags & SYSREG_BIT(GM)) != 0; +} + +static inline int raw_irqs_disabled(void) +{ + unsigned long flags = __raw_local_save_flags(); + + return raw_irqs_disabled_flags(flags); +} + +static inline unsigned long __raw_local_irq_save(void) +{ + unsigned long flags = __raw_local_save_flags(); + + raw_local_irq_disable(); + + return flags; +} + +#define raw_local_irq_save(flags) \ + do { (flags) = __raw_local_irq_save(); } while (0) + +#endif /* __ASM_AVR32_IRQFLAGS_H */ diff --git a/arch/avr32/include/asm/kdebug.h b/arch/avr32/include/asm/kdebug.h new file mode 100644 index 000000000000..ca4f9542365a --- /dev/null +++ b/arch/avr32/include/asm/kdebug.h @@ -0,0 +1,11 @@ +#ifndef __ASM_AVR32_KDEBUG_H +#define __ASM_AVR32_KDEBUG_H + +/* Grossly misnamed. */ +enum die_val { + DIE_BREAKPOINT, + DIE_SSTEP, + DIE_NMI, +}; + +#endif /* __ASM_AVR32_KDEBUG_H */ diff --git a/arch/avr32/include/asm/kmap_types.h b/arch/avr32/include/asm/kmap_types.h new file mode 100644 index 000000000000..b7f5c6870107 --- /dev/null +++ b/arch/avr32/include/asm/kmap_types.h @@ -0,0 +1,30 @@ +#ifndef __ASM_AVR32_KMAP_TYPES_H +#define __ASM_AVR32_KMAP_TYPES_H + +#ifdef CONFIG_DEBUG_HIGHMEM +# define D(n) __KM_FENCE_##n , +#else +# define D(n) +#endif + +enum km_type { +D(0) KM_BOUNCE_READ, +D(1) KM_SKB_SUNRPC_DATA, +D(2) KM_SKB_DATA_SOFTIRQ, +D(3) KM_USER0, +D(4) KM_USER1, +D(5) KM_BIO_SRC_IRQ, +D(6) KM_BIO_DST_IRQ, +D(7) KM_PTE0, +D(8) KM_PTE1, +D(9) KM_PTE2, +D(10) KM_IRQ0, +D(11) KM_IRQ1, +D(12) KM_SOFTIRQ0, +D(13) KM_SOFTIRQ1, +D(14) KM_TYPE_NR +}; + +#undef D + +#endif /* __ASM_AVR32_KMAP_TYPES_H */ diff --git a/arch/avr32/include/asm/kprobes.h b/arch/avr32/include/asm/kprobes.h new file mode 100644 index 000000000000..996cb656474e --- /dev/null +++ b/arch/avr32/include/asm/kprobes.h @@ -0,0 +1,35 @@ +/* + * Kernel Probes (KProbes) + * + * Copyright (C) 2005-2006 Atmel Corporation + * Copyright (C) IBM Corporation, 2002, 2004 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_KPROBES_H +#define __ASM_AVR32_KPROBES_H + +#include + +typedef u16 kprobe_opcode_t; +#define BREAKPOINT_INSTRUCTION 0xd673 /* breakpoint */ +#define MAX_INSN_SIZE 2 + +#define kretprobe_blacklist_size 0 + +#define arch_remove_kprobe(p) do { } while (0) + +/* Architecture specific copy of original instruction */ +struct arch_specific_insn { + kprobe_opcode_t insn[MAX_INSN_SIZE]; +}; + +extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr); +extern int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); + +#define flush_insn_slot(p) do { } while (0) + +#endif /* __ASM_AVR32_KPROBES_H */ diff --git a/arch/avr32/include/asm/linkage.h b/arch/avr32/include/asm/linkage.h new file mode 100644 index 000000000000..f7b285e910d4 --- /dev/null +++ b/arch/avr32/include/asm/linkage.h @@ -0,0 +1,7 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define __ALIGN .balign 2 +#define __ALIGN_STR ".balign 2" + +#endif /* __ASM_LINKAGE_H */ diff --git a/arch/avr32/include/asm/local.h b/arch/avr32/include/asm/local.h new file mode 100644 index 000000000000..1c1619694da3 --- /dev/null +++ b/arch/avr32/include/asm/local.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_LOCAL_H +#define __ASM_AVR32_LOCAL_H + +#include + +#endif /* __ASM_AVR32_LOCAL_H */ diff --git a/arch/avr32/include/asm/mach/serial_at91.h b/arch/avr32/include/asm/mach/serial_at91.h new file mode 100644 index 000000000000..55b317a89061 --- /dev/null +++ b/arch/avr32/include/asm/mach/serial_at91.h @@ -0,0 +1,33 @@ +/* + * linux/include/asm-arm/mach/serial_at91.h + * + * Based on serial_sa1100.h by Nicolas Pitre + * + * Copyright (C) 2002 ATMEL Rousset + * + * Low level machine dependent UART functions. + */ + +struct uart_port; + +/* + * This is a temporary structure for registering these + * functions; it is intended to be discarded after boot. + */ +struct atmel_port_fns { + void (*set_mctrl)(struct uart_port *, u_int); + u_int (*get_mctrl)(struct uart_port *); + void (*enable_ms)(struct uart_port *); + void (*pm)(struct uart_port *, u_int, u_int); + int (*set_wake)(struct uart_port *, u_int); + int (*open)(struct uart_port *); + void (*close)(struct uart_port *); +}; + +#if defined(CONFIG_SERIAL_ATMEL) +void atmel_register_uart_fns(struct atmel_port_fns *fns); +#else +#define atmel_register_uart_fns(fns) do { } while (0) +#endif + + diff --git a/arch/avr32/include/asm/mman.h b/arch/avr32/include/asm/mman.h new file mode 100644 index 000000000000..648f91e7187a --- /dev/null +++ b/arch/avr32/include/asm/mman.h @@ -0,0 +1,17 @@ +#ifndef __ASM_AVR32_MMAN_H__ +#define __ASM_AVR32_MMAN_H__ + +#include + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* __ASM_AVR32_MMAN_H__ */ diff --git a/arch/avr32/include/asm/mmu.h b/arch/avr32/include/asm/mmu.h new file mode 100644 index 000000000000..60c2d2650d32 --- /dev/null +++ b/arch/avr32/include/asm/mmu.h @@ -0,0 +1,10 @@ +#ifndef __ASM_AVR32_MMU_H +#define __ASM_AVR32_MMU_H + +/* Default "unsigned long" context */ +typedef unsigned long mm_context_t; + +#define MMU_ITLB_ENTRIES 64 +#define MMU_DTLB_ENTRIES 64 + +#endif /* __ASM_AVR32_MMU_H */ diff --git a/arch/avr32/include/asm/mmu_context.h b/arch/avr32/include/asm/mmu_context.h new file mode 100644 index 000000000000..27ff23407100 --- /dev/null +++ b/arch/avr32/include/asm/mmu_context.h @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * ASID handling taken from SH implementation. + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_MMU_CONTEXT_H +#define __ASM_AVR32_MMU_CONTEXT_H + +#include +#include +#include + +/* + * The MMU "context" consists of two things: + * (a) TLB cache version + * (b) ASID (Address Space IDentifier) + */ +#define MMU_CONTEXT_ASID_MASK 0x000000ff +#define MMU_CONTEXT_VERSION_MASK 0xffffff00 +#define MMU_CONTEXT_FIRST_VERSION 0x00000100 +#define NO_CONTEXT 0 + +#define MMU_NO_ASID 0x100 + +/* Virtual Page Number mask */ +#define MMU_VPN_MASK 0xfffff000 + +/* Cache of MMU context last used */ +extern unsigned long mmu_context_cache; + +/* + * Get MMU context if needed + */ +static inline void +get_mmu_context(struct mm_struct *mm) +{ + unsigned long mc = mmu_context_cache; + + if (((mm->context ^ mc) & MMU_CONTEXT_VERSION_MASK) == 0) + /* It's up to date, do nothing */ + return; + + /* It's old, we need to get new context with new version */ + mc = ++mmu_context_cache; + if (!(mc & MMU_CONTEXT_ASID_MASK)) { + /* + * We have exhausted all ASIDs of this version. + * Flush the TLB and start new cycle. + */ + flush_tlb_all(); + /* + * Fix version. Note that we avoid version #0 + * to distinguish NO_CONTEXT. + */ + if (!mc) + mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION; + } + mm->context = mc; +} + +/* + * Initialize the context related info for a new mm_struct + * instance. + */ +static inline int init_new_context(struct task_struct *tsk, + struct mm_struct *mm) +{ + mm->context = NO_CONTEXT; + return 0; +} + +/* + * Destroy context related info for an mm_struct that is about + * to be put to rest. + */ +static inline void destroy_context(struct mm_struct *mm) +{ + /* Do nothing */ +} + +static inline void set_asid(unsigned long asid) +{ + /* XXX: We're destroying TLBEHI[8:31] */ + sysreg_write(TLBEHI, asid & MMU_CONTEXT_ASID_MASK); + cpu_sync_pipeline(); +} + +static inline unsigned long get_asid(void) +{ + unsigned long asid; + + asid = sysreg_read(TLBEHI); + return asid & MMU_CONTEXT_ASID_MASK; +} + +static inline void activate_context(struct mm_struct *mm) +{ + get_mmu_context(mm); + set_asid(mm->context & MMU_CONTEXT_ASID_MASK); +} + +static inline void switch_mm(struct mm_struct *prev, + struct mm_struct *next, + struct task_struct *tsk) +{ + if (likely(prev != next)) { + unsigned long __pgdir = (unsigned long)next->pgd; + + sysreg_write(PTBR, __pgdir); + activate_context(next); + } +} + +#define deactivate_mm(tsk,mm) do { } while(0) + +#define activate_mm(prev, next) switch_mm((prev), (next), NULL) + +static inline void +enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + + +static inline void enable_mmu(void) +{ + sysreg_write(MMUCR, (SYSREG_BIT(MMUCR_S) + | SYSREG_BIT(E) + | SYSREG_BIT(MMUCR_I))); + nop(); nop(); nop(); nop(); nop(); nop(); nop(); nop(); + + if (mmu_context_cache == NO_CONTEXT) + mmu_context_cache = MMU_CONTEXT_FIRST_VERSION; + + set_asid(mmu_context_cache & MMU_CONTEXT_ASID_MASK); +} + +static inline void disable_mmu(void) +{ + sysreg_write(MMUCR, SYSREG_BIT(MMUCR_S)); +} + +#endif /* __ASM_AVR32_MMU_CONTEXT_H */ diff --git a/arch/avr32/include/asm/module.h b/arch/avr32/include/asm/module.h new file mode 100644 index 000000000000..451444538a1b --- /dev/null +++ b/arch/avr32/include/asm/module.h @@ -0,0 +1,28 @@ +#ifndef __ASM_AVR32_MODULE_H +#define __ASM_AVR32_MODULE_H + +struct mod_arch_syminfo { + unsigned long got_offset; + int got_initialized; +}; + +struct mod_arch_specific { + /* Starting offset of got in the module core memory. */ + unsigned long got_offset; + /* Size of the got. */ + unsigned long got_size; + /* Number of symbols in syminfo. */ + int nsyms; + /* Additional symbol information (got offsets). */ + struct mod_arch_syminfo *syminfo; +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +#define MODULE_PROC_FAMILY "AVR32v1" + +#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY + +#endif /* __ASM_AVR32_MODULE_H */ diff --git a/arch/avr32/include/asm/msgbuf.h b/arch/avr32/include/asm/msgbuf.h new file mode 100644 index 000000000000..ac18bc4da7f7 --- /dev/null +++ b/arch/avr32/include/asm/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef __ASM_AVR32_MSGBUF_H +#define __ASM_AVR32_MSGBUF_H + +/* + * The msqid64_ds structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* __ASM_AVR32_MSGBUF_H */ diff --git a/arch/avr32/include/asm/mutex.h b/arch/avr32/include/asm/mutex.h new file mode 100644 index 000000000000..458c1f7fbc18 --- /dev/null +++ b/arch/avr32/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include diff --git a/arch/avr32/include/asm/numnodes.h b/arch/avr32/include/asm/numnodes.h new file mode 100644 index 000000000000..0b864d7ce330 --- /dev/null +++ b/arch/avr32/include/asm/numnodes.h @@ -0,0 +1,7 @@ +#ifndef __ASM_AVR32_NUMNODES_H +#define __ASM_AVR32_NUMNODES_H + +/* Max 4 nodes */ +#define NODES_SHIFT 2 + +#endif /* __ASM_AVR32_NUMNODES_H */ diff --git a/arch/avr32/include/asm/ocd.h b/arch/avr32/include/asm/ocd.h new file mode 100644 index 000000000000..6bef09490235 --- /dev/null +++ b/arch/avr32/include/asm/ocd.h @@ -0,0 +1,543 @@ +/* + * AVR32 OCD Interface and register definitions + * + * Copyright (C) 2004-2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_OCD_H +#define __ASM_AVR32_OCD_H + +/* OCD Register offsets. Abbreviations used below: + * + * BP Breakpoint + * Comm Communication + * DT Data Trace + * PC Program Counter + * PID Process ID + * R/W Read/Write + * WP Watchpoint + */ +#define OCD_DID 0x0000 /* Device ID */ +#define OCD_DC 0x0008 /* Development Control */ +#define OCD_DS 0x0010 /* Development Status */ +#define OCD_RWCS 0x001c /* R/W Access Control */ +#define OCD_RWA 0x0024 /* R/W Access Address */ +#define OCD_RWD 0x0028 /* R/W Access Data */ +#define OCD_WT 0x002c /* Watchpoint Trigger */ +#define OCD_DTC 0x0034 /* Data Trace Control */ +#define OCD_DTSA0 0x0038 /* DT Start Addr Channel 0 */ +#define OCD_DTSA1 0x003c /* DT Start Addr Channel 1 */ +#define OCD_DTEA0 0x0048 /* DT End Addr Channel 0 */ +#define OCD_DTEA1 0x004c /* DT End Addr Channel 1 */ +#define OCD_BWC0A 0x0058 /* PC BP/WP Control 0A */ +#define OCD_BWC0B 0x005c /* PC BP/WP Control 0B */ +#define OCD_BWC1A 0x0060 /* PC BP/WP Control 1A */ +#define OCD_BWC1B 0x0064 /* PC BP/WP Control 1B */ +#define OCD_BWC2A 0x0068 /* PC BP/WP Control 2A */ +#define OCD_BWC2B 0x006c /* PC BP/WP Control 2B */ +#define OCD_BWC3A 0x0070 /* Data BP/WP Control 3A */ +#define OCD_BWC3B 0x0074 /* Data BP/WP Control 3B */ +#define OCD_BWA0A 0x0078 /* PC BP/WP Address 0A */ +#define OCD_BWA0B 0x007c /* PC BP/WP Address 0B */ +#define OCD_BWA1A 0x0080 /* PC BP/WP Address 1A */ +#define OCD_BWA1B 0x0084 /* PC BP/WP Address 1B */ +#define OCD_BWA2A 0x0088 /* PC BP/WP Address 2A */ +#define OCD_BWA2B 0x008c /* PC BP/WP Address 2B */ +#define OCD_BWA3A 0x0090 /* Data BP/WP Address 3A */ +#define OCD_BWA3B 0x0094 /* Data BP/WP Address 3B */ +#define OCD_NXCFG 0x0100 /* Nexus Configuration */ +#define OCD_DINST 0x0104 /* Debug Instruction */ +#define OCD_DPC 0x0108 /* Debug Program Counter */ +#define OCD_CPUCM 0x010c /* CPU Control Mask */ +#define OCD_DCCPU 0x0110 /* Debug Comm CPU */ +#define OCD_DCEMU 0x0114 /* Debug Comm Emulator */ +#define OCD_DCSR 0x0118 /* Debug Comm Status */ +#define OCD_PID 0x011c /* Ownership Trace PID */ +#define OCD_EPC0 0x0120 /* Event Pair Control 0 */ +#define OCD_EPC1 0x0124 /* Event Pair Control 1 */ +#define OCD_EPC2 0x0128 /* Event Pair Control 2 */ +#define OCD_EPC3 0x012c /* Event Pair Control 3 */ +#define OCD_AXC 0x0130 /* AUX port Control */ + +/* Bits in DID */ +#define OCD_DID_MID_START 1 +#define OCD_DID_MID_SIZE 11 +#define OCD_DID_PN_START 12 +#define OCD_DID_PN_SIZE 16 +#define OCD_DID_RN_START 28 +#define OCD_DID_RN_SIZE 4 + +/* Bits in DC */ +#define OCD_DC_TM_START 0 +#define OCD_DC_TM_SIZE 2 +#define OCD_DC_EIC_START 3 +#define OCD_DC_EIC_SIZE 2 +#define OCD_DC_OVC_START 5 +#define OCD_DC_OVC_SIZE 3 +#define OCD_DC_SS_BIT 8 +#define OCD_DC_DBR_BIT 12 +#define OCD_DC_DBE_BIT 13 +#define OCD_DC_EOS_START 20 +#define OCD_DC_EOS_SIZE 2 +#define OCD_DC_SQA_BIT 22 +#define OCD_DC_IRP_BIT 23 +#define OCD_DC_IFM_BIT 24 +#define OCD_DC_TOZ_BIT 25 +#define OCD_DC_TSR_BIT 26 +#define OCD_DC_RID_BIT 27 +#define OCD_DC_ORP_BIT 28 +#define OCD_DC_MM_BIT 29 +#define OCD_DC_RES_BIT 30 +#define OCD_DC_ABORT_BIT 31 + +/* Bits in DS */ +#define OCD_DS_SSS_BIT 0 +#define OCD_DS_SWB_BIT 1 +#define OCD_DS_HWB_BIT 2 +#define OCD_DS_HWE_BIT 3 +#define OCD_DS_STP_BIT 4 +#define OCD_DS_DBS_BIT 5 +#define OCD_DS_BP_START 8 +#define OCD_DS_BP_SIZE 8 +#define OCD_DS_INC_BIT 24 +#define OCD_DS_BOZ_BIT 25 +#define OCD_DS_DBA_BIT 26 +#define OCD_DS_EXB_BIT 27 +#define OCD_DS_NTBF_BIT 28 + +/* Bits in RWCS */ +#define OCD_RWCS_DV_BIT 0 +#define OCD_RWCS_ERR_BIT 1 +#define OCD_RWCS_CNT_START 2 +#define OCD_RWCS_CNT_SIZE 14 +#define OCD_RWCS_CRC_BIT 19 +#define OCD_RWCS_NTBC_START 20 +#define OCD_RWCS_NTBC_SIZE 2 +#define OCD_RWCS_NTE_BIT 22 +#define OCD_RWCS_NTAP_BIT 23 +#define OCD_RWCS_WRAPPED_BIT 24 +#define OCD_RWCS_CCTRL_START 25 +#define OCD_RWCS_CCTRL_SIZE 2 +#define OCD_RWCS_SZ_START 27 +#define OCD_RWCS_SZ_SIZE 3 +#define OCD_RWCS_RW_BIT 30 +#define OCD_RWCS_AC_BIT 31 + +/* Bits in RWA */ +#define OCD_RWA_RWA_START 0 +#define OCD_RWA_RWA_SIZE 32 + +/* Bits in RWD */ +#define OCD_RWD_RWD_START 0 +#define OCD_RWD_RWD_SIZE 32 + +/* Bits in WT */ +#define OCD_WT_DTE_START 20 +#define OCD_WT_DTE_SIZE 3 +#define OCD_WT_DTS_START 23 +#define OCD_WT_DTS_SIZE 3 +#define OCD_WT_PTE_START 26 +#define OCD_WT_PTE_SIZE 3 +#define OCD_WT_PTS_START 29 +#define OCD_WT_PTS_SIZE 3 + +/* Bits in DTC */ +#define OCD_DTC_T0WP_BIT 0 +#define OCD_DTC_T1WP_BIT 1 +#define OCD_DTC_ASID0EN_BIT 2 +#define OCD_DTC_ASID0_START 3 +#define OCD_DTC_ASID0_SIZE 8 +#define OCD_DTC_ASID1EN_BIT 11 +#define OCD_DTC_ASID1_START 12 +#define OCD_DTC_ASID1_SIZE 8 +#define OCD_DTC_RWT1_START 28 +#define OCD_DTC_RWT1_SIZE 2 +#define OCD_DTC_RWT0_START 30 +#define OCD_DTC_RWT0_SIZE 2 + +/* Bits in DTSA0 */ +#define OCD_DTSA0_DTSA_START 0 +#define OCD_DTSA0_DTSA_SIZE 32 + +/* Bits in DTSA1 */ +#define OCD_DTSA1_DTSA_START 0 +#define OCD_DTSA1_DTSA_SIZE 32 + +/* Bits in DTEA0 */ +#define OCD_DTEA0_DTEA_START 0 +#define OCD_DTEA0_DTEA_SIZE 32 + +/* Bits in DTEA1 */ +#define OCD_DTEA1_DTEA_START 0 +#define OCD_DTEA1_DTEA_SIZE 32 + +/* Bits in BWC0A */ +#define OCD_BWC0A_ASIDEN_BIT 0 +#define OCD_BWC0A_ASID_START 1 +#define OCD_BWC0A_ASID_SIZE 8 +#define OCD_BWC0A_EOC_BIT 14 +#define OCD_BWC0A_AME_BIT 25 +#define OCD_BWC0A_BWE_START 30 +#define OCD_BWC0A_BWE_SIZE 2 + +/* Bits in BWC0B */ +#define OCD_BWC0B_ASIDEN_BIT 0 +#define OCD_BWC0B_ASID_START 1 +#define OCD_BWC0B_ASID_SIZE 8 +#define OCD_BWC0B_EOC_BIT 14 +#define OCD_BWC0B_AME_BIT 25 +#define OCD_BWC0B_BWE_START 30 +#define OCD_BWC0B_BWE_SIZE 2 + +/* Bits in BWC1A */ +#define OCD_BWC1A_ASIDEN_BIT 0 +#define OCD_BWC1A_ASID_START 1 +#define OCD_BWC1A_ASID_SIZE 8 +#define OCD_BWC1A_EOC_BIT 14 +#define OCD_BWC1A_AME_BIT 25 +#define OCD_BWC1A_BWE_START 30 +#define OCD_BWC1A_BWE_SIZE 2 + +/* Bits in BWC1B */ +#define OCD_BWC1B_ASIDEN_BIT 0 +#define OCD_BWC1B_ASID_START 1 +#define OCD_BWC1B_ASID_SIZE 8 +#define OCD_BWC1B_EOC_BIT 14 +#define OCD_BWC1B_AME_BIT 25 +#define OCD_BWC1B_BWE_START 30 +#define OCD_BWC1B_BWE_SIZE 2 + +/* Bits in BWC2A */ +#define OCD_BWC2A_ASIDEN_BIT 0 +#define OCD_BWC2A_ASID_START 1 +#define OCD_BWC2A_ASID_SIZE 8 +#define OCD_BWC2A_EOC_BIT 14 +#define OCD_BWC2A_AMB_START 20 +#define OCD_BWC2A_AMB_SIZE 5 +#define OCD_BWC2A_AME_BIT 25 +#define OCD_BWC2A_BWE_START 30 +#define OCD_BWC2A_BWE_SIZE 2 + +/* Bits in BWC2B */ +#define OCD_BWC2B_ASIDEN_BIT 0 +#define OCD_BWC2B_ASID_START 1 +#define OCD_BWC2B_ASID_SIZE 8 +#define OCD_BWC2B_EOC_BIT 14 +#define OCD_BWC2B_AME_BIT 25 +#define OCD_BWC2B_BWE_START 30 +#define OCD_BWC2B_BWE_SIZE 2 + +/* Bits in BWC3A */ +#define OCD_BWC3A_ASIDEN_BIT 0 +#define OCD_BWC3A_ASID_START 1 +#define OCD_BWC3A_ASID_SIZE 8 +#define OCD_BWC3A_SIZE_START 9 +#define OCD_BWC3A_SIZE_SIZE 3 +#define OCD_BWC3A_EOC_BIT 14 +#define OCD_BWC3A_BWO_START 16 +#define OCD_BWC3A_BWO_SIZE 2 +#define OCD_BWC3A_BME_START 20 +#define OCD_BWC3A_BME_SIZE 4 +#define OCD_BWC3A_BRW_START 28 +#define OCD_BWC3A_BRW_SIZE 2 +#define OCD_BWC3A_BWE_START 30 +#define OCD_BWC3A_BWE_SIZE 2 + +/* Bits in BWC3B */ +#define OCD_BWC3B_ASIDEN_BIT 0 +#define OCD_BWC3B_ASID_START 1 +#define OCD_BWC3B_ASID_SIZE 8 +#define OCD_BWC3B_SIZE_START 9 +#define OCD_BWC3B_SIZE_SIZE 3 +#define OCD_BWC3B_EOC_BIT 14 +#define OCD_BWC3B_BWO_START 16 +#define OCD_BWC3B_BWO_SIZE 2 +#define OCD_BWC3B_BME_START 20 +#define OCD_BWC3B_BME_SIZE 4 +#define OCD_BWC3B_BRW_START 28 +#define OCD_BWC3B_BRW_SIZE 2 +#define OCD_BWC3B_BWE_START 30 +#define OCD_BWC3B_BWE_SIZE 2 + +/* Bits in BWA0A */ +#define OCD_BWA0A_BWA_START 0 +#define OCD_BWA0A_BWA_SIZE 32 + +/* Bits in BWA0B */ +#define OCD_BWA0B_BWA_START 0 +#define OCD_BWA0B_BWA_SIZE 32 + +/* Bits in BWA1A */ +#define OCD_BWA1A_BWA_START 0 +#define OCD_BWA1A_BWA_SIZE 32 + +/* Bits in BWA1B */ +#define OCD_BWA1B_BWA_START 0 +#define OCD_BWA1B_BWA_SIZE 32 + +/* Bits in BWA2A */ +#define OCD_BWA2A_BWA_START 0 +#define OCD_BWA2A_BWA_SIZE 32 + +/* Bits in BWA2B */ +#define OCD_BWA2B_BWA_START 0 +#define OCD_BWA2B_BWA_SIZE 32 + +/* Bits in BWA3A */ +#define OCD_BWA3A_BWA_START 0 +#define OCD_BWA3A_BWA_SIZE 32 + +/* Bits in BWA3B */ +#define OCD_BWA3B_BWA_START 0 +#define OCD_BWA3B_BWA_SIZE 32 + +/* Bits in NXCFG */ +#define OCD_NXCFG_NXARCH_START 0 +#define OCD_NXCFG_NXARCH_SIZE 4 +#define OCD_NXCFG_NXOCD_START 4 +#define OCD_NXCFG_NXOCD_SIZE 4 +#define OCD_NXCFG_NXPCB_START 8 +#define OCD_NXCFG_NXPCB_SIZE 4 +#define OCD_NXCFG_NXDB_START 12 +#define OCD_NXCFG_NXDB_SIZE 4 +#define OCD_NXCFG_MXMSEO_BIT 16 +#define OCD_NXCFG_NXMDO_START 17 +#define OCD_NXCFG_NXMDO_SIZE 4 +#define OCD_NXCFG_NXPT_BIT 21 +#define OCD_NXCFG_NXOT_BIT 22 +#define OCD_NXCFG_NXDWT_BIT 23 +#define OCD_NXCFG_NXDRT_BIT 24 +#define OCD_NXCFG_NXDTC_START 25 +#define OCD_NXCFG_NXDTC_SIZE 3 +#define OCD_NXCFG_NXDMA_BIT 28 + +/* Bits in DINST */ +#define OCD_DINST_DINST_START 0 +#define OCD_DINST_DINST_SIZE 32 + +/* Bits in CPUCM */ +#define OCD_CPUCM_BEM_BIT 1 +#define OCD_CPUCM_FEM_BIT 2 +#define OCD_CPUCM_REM_BIT 3 +#define OCD_CPUCM_IBEM_BIT 4 +#define OCD_CPUCM_IEEM_BIT 5 + +/* Bits in DCCPU */ +#define OCD_DCCPU_DATA_START 0 +#define OCD_DCCPU_DATA_SIZE 32 + +/* Bits in DCEMU */ +#define OCD_DCEMU_DATA_START 0 +#define OCD_DCEMU_DATA_SIZE 32 + +/* Bits in DCSR */ +#define OCD_DCSR_CPUD_BIT 0 +#define OCD_DCSR_EMUD_BIT 1 + +/* Bits in PID */ +#define OCD_PID_PROCESS_START 0 +#define OCD_PID_PROCESS_SIZE 32 + +/* Bits in EPC0 */ +#define OCD_EPC0_RNG_START 0 +#define OCD_EPC0_RNG_SIZE 2 +#define OCD_EPC0_CE_BIT 4 +#define OCD_EPC0_ECNT_START 16 +#define OCD_EPC0_ECNT_SIZE 16 + +/* Bits in EPC1 */ +#define OCD_EPC1_RNG_START 0 +#define OCD_EPC1_RNG_SIZE 2 +#define OCD_EPC1_ATB_BIT 5 +#define OCD_EPC1_AM_BIT 6 + +/* Bits in EPC2 */ +#define OCD_EPC2_RNG_START 0 +#define OCD_EPC2_RNG_SIZE 2 +#define OCD_EPC2_DB_START 2 +#define OCD_EPC2_DB_SIZE 2 + +/* Bits in EPC3 */ +#define OCD_EPC3_RNG_START 0 +#define OCD_EPC3_RNG_SIZE 2 +#define OCD_EPC3_DWE_BIT 2 + +/* Bits in AXC */ +#define OCD_AXC_DIV_START 0 +#define OCD_AXC_DIV_SIZE 4 +#define OCD_AXC_AXE_BIT 8 +#define OCD_AXC_AXS_BIT 9 +#define OCD_AXC_DDR_BIT 10 +#define OCD_AXC_LS_BIT 11 +#define OCD_AXC_REX_BIT 12 +#define OCD_AXC_REXTEN_BIT 13 + +/* Constants for DC:EIC */ +#define OCD_EIC_PROGRAM_AND_DATA_TRACE 0 +#define OCD_EIC_BREAKPOINT 1 +#define OCD_EIC_NOP 2 + +/* Constants for DC:OVC */ +#define OCD_OVC_OVERRUN 0 +#define OCD_OVC_DELAY_CPU_BTM 1 +#define OCD_OVC_DELAY_CPU_DTM 2 +#define OCD_OVC_DELAY_CPU_BTM_DTM 3 + +/* Constants for DC:EOS */ +#define OCD_EOS_NOP 0 +#define OCD_EOS_DEBUG_MODE 1 +#define OCD_EOS_BREAKPOINT_WATCHPOINT 2 +#define OCD_EOS_THQ 3 + +/* Constants for RWCS:NTBC */ +#define OCD_NTBC_OVERWRITE 0 +#define OCD_NTBC_DISABLE 1 +#define OCD_NTBC_BREAKPOINT 2 + +/* Constants for RWCS:CCTRL */ +#define OCD_CCTRL_AUTO 0 +#define OCD_CCTRL_CACHED 1 +#define OCD_CCTRL_UNCACHED 2 + +/* Constants for RWCS:SZ */ +#define OCD_SZ_BYTE 0 +#define OCD_SZ_HALFWORD 1 +#define OCD_SZ_WORD 2 + +/* Constants for WT:PTS */ +#define OCD_PTS_DISABLED 0 +#define OCD_PTS_PROGRAM_0B 1 +#define OCD_PTS_PROGRAM_1A 2 +#define OCD_PTS_PROGRAM_1B 3 +#define OCD_PTS_PROGRAM_2A 4 +#define OCD_PTS_PROGRAM_2B 5 +#define OCD_PTS_DATA_3A 6 +#define OCD_PTS_DATA_3B 7 + +/* Constants for DTC:RWT1 */ +#define OCD_RWT1_NO_TRACE 0 +#define OCD_RWT1_DATA_READ 1 +#define OCD_RWT1_DATA_WRITE 2 +#define OCD_RWT1_DATA_READ_WRITE 3 + +/* Constants for DTC:RWT0 */ +#define OCD_RWT0_NO_TRACE 0 +#define OCD_RWT0_DATA_READ 1 +#define OCD_RWT0_DATA_WRITE 2 +#define OCD_RWT0_DATA_READ_WRITE 3 + +/* Constants for BWC0A:BWE */ +#define OCD_BWE_DISABLED 0 +#define OCD_BWE_BREAKPOINT_ENABLED 1 +#define OCD_BWE_WATCHPOINT_ENABLED 3 + +/* Constants for BWC0B:BWE */ +#define OCD_BWE_DISABLED 0 +#define OCD_BWE_BREAKPOINT_ENABLED 1 +#define OCD_BWE_WATCHPOINT_ENABLED 3 + +/* Constants for BWC1A:BWE */ +#define OCD_BWE_DISABLED 0 +#define OCD_BWE_BREAKPOINT_ENABLED 1 +#define OCD_BWE_WATCHPOINT_ENABLED 3 + +/* Constants for BWC1B:BWE */ +#define OCD_BWE_DISABLED 0 +#define OCD_BWE_BREAKPOINT_ENABLED 1 +#define OCD_BWE_WATCHPOINT_ENABLED 3 + +/* Constants for BWC2A:BWE */ +#define OCD_BWE_DISABLED 0 +#define OCD_BWE_BREAKPOINT_ENABLED 1 +#define OCD_BWE_WATCHPOINT_ENABLED 3 + +/* Constants for BWC2B:BWE */ +#define OCD_BWE_DISABLED 0 +#define OCD_BWE_BREAKPOINT_ENABLED 1 +#define OCD_BWE_WATCHPOINT_ENABLED 3 + +/* Constants for BWC3A:SIZE */ +#define OCD_SIZE_BYTE_ACCESS 4 +#define OCD_SIZE_HALFWORD_ACCESS 5 +#define OCD_SIZE_WORD_ACCESS 6 +#define OCD_SIZE_DOUBLE_WORD_ACCESS 7 + +/* Constants for BWC3A:BRW */ +#define OCD_BRW_READ_BREAK 0 +#define OCD_BRW_WRITE_BREAK 1 +#define OCD_BRW_ANY_ACCES_BREAK 2 + +/* Constants for BWC3A:BWE */ +#define OCD_BWE_DISABLED 0 +#define OCD_BWE_BREAKPOINT_ENABLED 1 +#define OCD_BWE_WATCHPOINT_ENABLED 3 + +/* Constants for BWC3B:SIZE */ +#define OCD_SIZE_BYTE_ACCESS 4 +#define OCD_SIZE_HALFWORD_ACCESS 5 +#define OCD_SIZE_WORD_ACCESS 6 +#define OCD_SIZE_DOUBLE_WORD_ACCESS 7 + +/* Constants for BWC3B:BRW */ +#define OCD_BRW_READ_BREAK 0 +#define OCD_BRW_WRITE_BREAK 1 +#define OCD_BRW_ANY_ACCES_BREAK 2 + +/* Constants for BWC3B:BWE */ +#define OCD_BWE_DISABLED 0 +#define OCD_BWE_BREAKPOINT_ENABLED 1 +#define OCD_BWE_WATCHPOINT_ENABLED 3 + +/* Constants for EPC0:RNG */ +#define OCD_RNG_DISABLED 0 +#define OCD_RNG_EXCLUSIVE 1 +#define OCD_RNG_INCLUSIVE 2 + +/* Constants for EPC1:RNG */ +#define OCD_RNG_DISABLED 0 +#define OCD_RNG_EXCLUSIVE 1 +#define OCD_RNG_INCLUSIVE 2 + +/* Constants for EPC2:RNG */ +#define OCD_RNG_DISABLED 0 +#define OCD_RNG_EXCLUSIVE 1 +#define OCD_RNG_INCLUSIVE 2 + +/* Constants for EPC2:DB */ +#define OCD_DB_DISABLED 0 +#define OCD_DB_CHAINED_B 1 +#define OCD_DB_CHAINED_A 2 +#define OCD_DB_AHAINED_A_AND_B 3 + +/* Constants for EPC3:RNG */ +#define OCD_RNG_DISABLED 0 +#define OCD_RNG_EXCLUSIVE 1 +#define OCD_RNG_INCLUSIVE 2 + +#ifndef __ASSEMBLER__ + +/* Register access macros */ +static inline unsigned long __ocd_read(unsigned int reg) +{ + return __builtin_mfdr(reg); +} + +static inline void __ocd_write(unsigned int reg, unsigned long value) +{ + __builtin_mtdr(reg, value); +} + +#define ocd_read(reg) __ocd_read(OCD_##reg) +#define ocd_write(reg, value) __ocd_write(OCD_##reg, value) + +struct task_struct; + +void ocd_enable(struct task_struct *child); +void ocd_disable(struct task_struct *child); + +#endif /* !__ASSEMBLER__ */ + +#endif /* __ASM_AVR32_OCD_H */ diff --git a/arch/avr32/include/asm/page.h b/arch/avr32/include/asm/page.h new file mode 100644 index 000000000000..f805d1cb11bc --- /dev/null +++ b/arch/avr32/include/asm/page.h @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_PAGE_H +#define __ASM_AVR32_PAGE_H + +#include + +/* PAGE_SHIFT determines the page size */ +#define PAGE_SHIFT 12 +#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) +#define PTE_MASK PAGE_MASK + +#ifndef __ASSEMBLY__ + +#include + +extern void clear_page(void *to); +extern void copy_page(void *to, void *from); + +#define clear_user_page(page, vaddr, pg) clear_page(page) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pgd; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct page *pgtable_t; + +#define pte_val(x) ((x).pte) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) }) +#define __pgd(x) ((pgd_t) { (x) }) +#define __pgprot(x) ((pgprot_t) { (x) }) + +/* FIXME: These should be removed soon */ +extern unsigned long memory_start, memory_end; + +/* Pure 2^n version of get_order */ +static inline int get_order(unsigned long size) +{ + unsigned lz; + + size = (size - 1) >> PAGE_SHIFT; + asm("clz %0, %1" : "=r"(lz) : "r"(size)); + return 32 - lz; +} + +#endif /* !__ASSEMBLY__ */ + +/* + * The hardware maps the virtual addresses 0x80000000 -> 0x9fffffff + * permanently to the physical addresses 0x00000000 -> 0x1fffffff when + * segmentation is enabled. We want to make use of this in order to + * minimize TLB pressure. + */ +#define PAGE_OFFSET (0x80000000UL) + +/* + * ALSA uses virt_to_page() on DMA pages, which I'm not entirely sure + * is a good idea. Anyway, we can't simply subtract PAGE_OFFSET here + * in that case, so we'll have to mask out the three most significant + * bits of the address instead... + * + * What's the difference between __pa() and virt_to_phys() anyway? + */ +#define __pa(x) PHYSADDR(x) +#define __va(x) ((void *)(P1SEGADDR(x))) + +#define MAP_NR(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> PAGE_SHIFT) + +#define phys_to_page(phys) (pfn_to_page(phys >> PAGE_SHIFT)) +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +#ifndef CONFIG_NEED_MULTIPLE_NODES + +#define PHYS_PFN_OFFSET (CONFIG_PHYS_OFFSET >> PAGE_SHIFT) + +#define pfn_to_page(pfn) (mem_map + ((pfn) - PHYS_PFN_OFFSET)) +#define page_to_pfn(page) ((unsigned long)((page) - mem_map) + PHYS_PFN_OFFSET) +#define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr)) +#endif /* CONFIG_NEED_MULTIPLE_NODES */ + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +/* + * Memory above this physical address will be considered highmem. + */ +#define HIGHMEM_START 0x20000000UL + +#endif /* __ASM_AVR32_PAGE_H */ diff --git a/arch/avr32/include/asm/param.h b/arch/avr32/include/asm/param.h new file mode 100644 index 000000000000..34bc8d4c3b29 --- /dev/null +++ b/arch/avr32/include/asm/param.h @@ -0,0 +1,23 @@ +#ifndef __ASM_AVR32_PARAM_H +#define __ASM_AVR32_PARAM_H + +#ifdef __KERNEL__ +# define HZ CONFIG_HZ +# define USER_HZ 100 /* User interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ +#endif + +#ifndef HZ +# define HZ 100 +#endif + +/* TODO: Should be configurable */ +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +# define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 + +#endif /* __ASM_AVR32_PARAM_H */ diff --git a/arch/avr32/include/asm/pci.h b/arch/avr32/include/asm/pci.h new file mode 100644 index 000000000000..a32a02372017 --- /dev/null +++ b/arch/avr32/include/asm/pci.h @@ -0,0 +1,10 @@ +#ifndef __ASM_AVR32_PCI_H__ +#define __ASM_AVR32_PCI_H__ + +/* We don't support PCI yet, but some drivers require this file anyway */ + +#define PCI_DMA_BUS_IS_PHYS (1) + +#include + +#endif /* __ASM_AVR32_PCI_H__ */ diff --git a/arch/avr32/include/asm/percpu.h b/arch/avr32/include/asm/percpu.h new file mode 100644 index 000000000000..69227b4cd0d4 --- /dev/null +++ b/arch/avr32/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_PERCPU_H +#define __ASM_AVR32_PERCPU_H + +#include + +#endif /* __ASM_AVR32_PERCPU_H */ diff --git a/arch/avr32/include/asm/pgalloc.h b/arch/avr32/include/asm/pgalloc.h new file mode 100644 index 000000000000..640821323943 --- /dev/null +++ b/arch/avr32/include/asm/pgalloc.h @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_PGALLOC_H +#define __ASM_AVR32_PGALLOC_H + +#include +#include +#include + +#define QUICK_PGD 0 /* Preserve kernel mappings over free */ +#define QUICK_PT 1 /* Zero on free */ + +static inline void pmd_populate_kernel(struct mm_struct *mm, + pmd_t *pmd, pte_t *pte) +{ + set_pmd(pmd, __pmd((unsigned long)pte)); +} + +static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, + pgtable_t pte) +{ + set_pmd(pmd, __pmd((unsigned long)page_address(pte))); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +static inline void pgd_ctor(void *x) +{ + pgd_t *pgd = x; + + memcpy(pgd + USER_PTRS_PER_PGD, + swapper_pg_dir + USER_PTRS_PER_PGD, + (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); +} + +/* + * Allocate and free page tables + */ +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor); +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + quicklist_free(QUICK_PGD, NULL, pgd); +} + +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); +} + +static inline pgtable_t pte_alloc_one(struct mm_struct *mm, + unsigned long address) +{ + struct page *page; + void *pg; + + pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); + if (!pg) + return NULL; + + page = virt_to_page(pg); + pgtable_page_ctor(page); + + return page; +} + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + quicklist_free(QUICK_PT, NULL, pte); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t pte) +{ + pgtable_page_dtor(pte); + quicklist_free_page(QUICK_PT, NULL, pte); +} + +#define __pte_free_tlb(tlb,pte) \ +do { \ + pgtable_page_dtor(pte); \ + tlb_remove_page((tlb), pte); \ +} while (0) + +static inline void check_pgt_cache(void) +{ + quicklist_trim(QUICK_PGD, NULL, 25, 16); + quicklist_trim(QUICK_PT, NULL, 25, 16); +} + +#endif /* __ASM_AVR32_PGALLOC_H */ diff --git a/arch/avr32/include/asm/pgtable-2level.h b/arch/avr32/include/asm/pgtable-2level.h new file mode 100644 index 000000000000..425dd567b5b9 --- /dev/null +++ b/arch/avr32/include/asm/pgtable-2level.h @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_PGTABLE_2LEVEL_H +#define __ASM_AVR32_PGTABLE_2LEVEL_H + +#include + +/* + * Traditional 2-level paging structure + */ +#define PGDIR_SHIFT 22 +#define PTRS_PER_PGD 1024 + +#define PTRS_PER_PTE 1024 + +#ifndef __ASSEMBLY__ +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#define set_pte(pteptr, pteval) (*(pteptr) = pteval) +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep, pteval) + +/* + * (pmds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) + +#define pte_pfn(x) ((unsigned long)(((x).pte >> PAGE_SHIFT))) +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_AVR32_PGTABLE_2LEVEL_H */ diff --git a/arch/avr32/include/asm/pgtable.h b/arch/avr32/include/asm/pgtable.h new file mode 100644 index 000000000000..fecdda16f444 --- /dev/null +++ b/arch/avr32/include/asm/pgtable.h @@ -0,0 +1,377 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_PGTABLE_H +#define __ASM_AVR32_PGTABLE_H + +#include + +#ifndef __ASSEMBLY__ +#include + +#endif /* !__ASSEMBLY__ */ + +/* + * Use two-level page tables just as the i386 (without PAE) + */ +#include + +/* + * The following code might need some cleanup when the values are + * final... + */ +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +#ifndef __ASSEMBLY__ +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; +extern void paging_init(void); + +/* + * ZERO_PAGE is a global shared page that is always zero: used for + * zero-mapped memory areas etc. + */ +extern struct page *empty_zero_page; +#define ZERO_PAGE(vaddr) (empty_zero_page) + +/* + * Just any arbitrary offset to the start of the vmalloc VM area: the + * current 8 MiB value just means that there will be a 8 MiB "hole" + * after the uncached physical memory (P2 segment) until the vmalloc + * area starts. That means that any out-of-bounds memory accesses will + * hopefully be caught; we don't know if the end of the P1/P2 segments + * are actually used for anything, but it is anyway safer to let the + * MMU catch these kinds of errors than to rely on the memory bus. + * + * A "hole" of the same size is added to the end of the P3 segment as + * well. It might seem wasteful to use 16 MiB of virtual address space + * on this, but we do have 512 MiB of it... + * + * The vmalloc() routines leave a hole of 4 KiB between each vmalloced + * area for the same reason. + */ +#define VMALLOC_OFFSET (8 * 1024 * 1024) +#define VMALLOC_START (P3SEG + VMALLOC_OFFSET) +#define VMALLOC_END (P4SEG - VMALLOC_OFFSET) +#endif /* !__ASSEMBLY__ */ + +/* + * Page flags. Some of these flags are not directly supported by + * hardware, so we have to emulate them. + */ +#define _TLBEHI_BIT_VALID 9 +#define _TLBEHI_VALID (1 << _TLBEHI_BIT_VALID) + +#define _PAGE_BIT_WT 0 /* W-bit : write-through */ +#define _PAGE_BIT_DIRTY 1 /* D-bit : page changed */ +#define _PAGE_BIT_SZ0 2 /* SZ0-bit : Size of page */ +#define _PAGE_BIT_SZ1 3 /* SZ1-bit : Size of page */ +#define _PAGE_BIT_EXECUTE 4 /* X-bit : execute access allowed */ +#define _PAGE_BIT_RW 5 /* AP0-bit : write access allowed */ +#define _PAGE_BIT_USER 6 /* AP1-bit : user space access allowed */ +#define _PAGE_BIT_BUFFER 7 /* B-bit : bufferable */ +#define _PAGE_BIT_GLOBAL 8 /* G-bit : global (ignore ASID) */ +#define _PAGE_BIT_CACHABLE 9 /* C-bit : cachable */ + +/* If we drop support for 1K pages, we get two extra bits */ +#define _PAGE_BIT_PRESENT 10 +#define _PAGE_BIT_ACCESSED 11 /* software: page was accessed */ + +/* The following flags are only valid when !PRESENT */ +#define _PAGE_BIT_FILE 0 /* software: pagecache or swap? */ + +#define _PAGE_WT (1 << _PAGE_BIT_WT) +#define _PAGE_DIRTY (1 << _PAGE_BIT_DIRTY) +#define _PAGE_EXECUTE (1 << _PAGE_BIT_EXECUTE) +#define _PAGE_RW (1 << _PAGE_BIT_RW) +#define _PAGE_USER (1 << _PAGE_BIT_USER) +#define _PAGE_BUFFER (1 << _PAGE_BIT_BUFFER) +#define _PAGE_GLOBAL (1 << _PAGE_BIT_GLOBAL) +#define _PAGE_CACHABLE (1 << _PAGE_BIT_CACHABLE) + +/* Software flags */ +#define _PAGE_ACCESSED (1 << _PAGE_BIT_ACCESSED) +#define _PAGE_PRESENT (1 << _PAGE_BIT_PRESENT) +#define _PAGE_FILE (1 << _PAGE_BIT_FILE) + +/* + * Page types, i.e. sizes. _PAGE_TYPE_NONE corresponds to what is + * usually called _PAGE_PROTNONE on other architectures. + * + * XXX: Find out if _PAGE_PROTNONE is equivalent with !_PAGE_USER. If + * so, we can encode all possible page sizes (although we can't really + * support 1K pages anyway due to the _PAGE_PRESENT and _PAGE_ACCESSED + * bits) + * + */ +#define _PAGE_TYPE_MASK ((1 << _PAGE_BIT_SZ0) | (1 << _PAGE_BIT_SZ1)) +#define _PAGE_TYPE_NONE (0 << _PAGE_BIT_SZ0) +#define _PAGE_TYPE_SMALL (1 << _PAGE_BIT_SZ0) +#define _PAGE_TYPE_MEDIUM (2 << _PAGE_BIT_SZ0) +#define _PAGE_TYPE_LARGE (3 << _PAGE_BIT_SZ0) + +/* + * Mask which drop software flags. We currently can't handle more than + * 512 MiB of physical memory, so we can use bits 29-31 for other + * stuff. With a fixed 4K page size, we can use bits 10-11 as well as + * bits 2-3 (SZ) + */ +#define _PAGE_FLAGS_HARDWARE_MASK 0xfffff3ff + +#define _PAGE_FLAGS_CACHE_MASK (_PAGE_CACHABLE | _PAGE_BUFFER | _PAGE_WT) + +/* Flags that may be modified by software */ +#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY \ + | _PAGE_FLAGS_CACHE_MASK) + +#define _PAGE_FLAGS_READ (_PAGE_CACHABLE | _PAGE_BUFFER) +#define _PAGE_FLAGS_WRITE (_PAGE_FLAGS_READ | _PAGE_RW | _PAGE_DIRTY) + +#define _PAGE_NORMAL(x) __pgprot((x) | _PAGE_PRESENT | _PAGE_TYPE_SMALL \ + | _PAGE_ACCESSED) + +#define PAGE_NONE (_PAGE_ACCESSED | _PAGE_TYPE_NONE) +#define PAGE_READ (_PAGE_FLAGS_READ | _PAGE_USER) +#define PAGE_EXEC (_PAGE_FLAGS_READ | _PAGE_EXECUTE | _PAGE_USER) +#define PAGE_WRITE (_PAGE_FLAGS_WRITE | _PAGE_USER) +#define PAGE_KERNEL _PAGE_NORMAL(_PAGE_FLAGS_WRITE | _PAGE_EXECUTE | _PAGE_GLOBAL) +#define PAGE_KERNEL_RO _PAGE_NORMAL(_PAGE_FLAGS_READ | _PAGE_EXECUTE | _PAGE_GLOBAL) + +#define _PAGE_P(x) _PAGE_NORMAL((x) & ~(_PAGE_RW | _PAGE_DIRTY)) +#define _PAGE_S(x) _PAGE_NORMAL(x) + +#define PAGE_COPY _PAGE_P(PAGE_WRITE | PAGE_READ) +#define PAGE_SHARED _PAGE_S(PAGE_WRITE | PAGE_READ) + +#ifndef __ASSEMBLY__ +/* + * The hardware supports flags for write- and execute access. Read is + * always allowed if the page is loaded into the TLB, so the "-w-", + * "--x" and "-wx" mappings are implemented as "rw-", "r-x" and "rwx", + * respectively. + * + * The "---" case is handled by software; the page will simply not be + * loaded into the TLB if the page type is _PAGE_TYPE_NONE. + */ + +#define __P000 __pgprot(PAGE_NONE) +#define __P001 _PAGE_P(PAGE_READ) +#define __P010 _PAGE_P(PAGE_WRITE) +#define __P011 _PAGE_P(PAGE_WRITE | PAGE_READ) +#define __P100 _PAGE_P(PAGE_EXEC) +#define __P101 _PAGE_P(PAGE_EXEC | PAGE_READ) +#define __P110 _PAGE_P(PAGE_EXEC | PAGE_WRITE) +#define __P111 _PAGE_P(PAGE_EXEC | PAGE_WRITE | PAGE_READ) + +#define __S000 __pgprot(PAGE_NONE) +#define __S001 _PAGE_S(PAGE_READ) +#define __S010 _PAGE_S(PAGE_WRITE) +#define __S011 _PAGE_S(PAGE_WRITE | PAGE_READ) +#define __S100 _PAGE_S(PAGE_EXEC) +#define __S101 _PAGE_S(PAGE_EXEC | PAGE_READ) +#define __S110 _PAGE_S(PAGE_EXEC | PAGE_WRITE) +#define __S111 _PAGE_S(PAGE_EXEC | PAGE_WRITE | PAGE_READ) + +#define pte_none(x) (!pte_val(x)) +#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) + +#define pte_clear(mm,addr,xp) \ + do { \ + set_pte_at(mm, addr, xp, __pte(0)); \ + } while (0) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +static inline int pte_write(pte_t pte) +{ + return pte_val(pte) & _PAGE_RW; +} +static inline int pte_dirty(pte_t pte) +{ + return pte_val(pte) & _PAGE_DIRTY; +} +static inline int pte_young(pte_t pte) +{ + return pte_val(pte) & _PAGE_ACCESSED; +} +static inline int pte_special(pte_t pte) +{ + return 0; +} + +/* + * The following only work if pte_present() is not true. + */ +static inline int pte_file(pte_t pte) +{ + return pte_val(pte) & _PAGE_FILE; +} + +/* Mutator functions for PTE bits */ +static inline pte_t pte_wrprotect(pte_t pte) +{ + set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_RW)); + return pte; +} +static inline pte_t pte_mkclean(pte_t pte) +{ + set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); + return pte; +} +static inline pte_t pte_mkold(pte_t pte) +{ + set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); + return pte; +} +static inline pte_t pte_mkwrite(pte_t pte) +{ + set_pte(&pte, __pte(pte_val(pte) | _PAGE_RW)); + return pte; +} +static inline pte_t pte_mkdirty(pte_t pte) +{ + set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); + return pte; +} +static inline pte_t pte_mkyoung(pte_t pte) +{ + set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); + return pte; +} +static inline pte_t pte_mkspecial(pte_t pte) +{ + return pte; +} + +#define pmd_none(x) (!pmd_val(x)) +#define pmd_present(x) (pmd_val(x)) + +static inline void pmd_clear(pmd_t *pmdp) +{ + set_pmd(pmdp, __pmd(0)); +} + +#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK) + +/* + * Permanent address of a page. We don't support highmem, so this is + * trivial. + */ +#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) +#define pte_page(x) (pfn_to_page(pte_pfn(x))) + +/* + * Mark the prot value as uncacheable and unbufferable + */ +#define pgprot_noncached(prot) \ + __pgprot(pgprot_val(prot) & ~(_PAGE_BUFFER | _PAGE_CACHABLE)) + +/* + * Mark the prot value as uncacheable but bufferable + */ +#define pgprot_writecombine(prot) \ + __pgprot((pgprot_val(prot) & ~_PAGE_CACHABLE) | _PAGE_BUFFER) + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + * + * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) + */ +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) + | pgprot_val(newprot))); + return pte; +} + +#define page_pte(page) page_pte_prot(page, __pgprot(0)) + +#define pmd_page_vaddr(pmd) pmd_val(pmd) +#define pmd_page(pmd) (virt_to_page(pmd_val(pmd))) + +/* to find an entry in a page-table-directory. */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) \ + & (PTRS_PER_PGD - 1)) +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* Find an entry in the third-level page table.. */ +#define pte_index(address) \ + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) +#define pte_offset_map(dir, address) pte_offset_kernel(dir, address) +#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +struct vm_area_struct; +extern void update_mmu_cache(struct vm_area_struct * vma, + unsigned long address, pte_t pte); + +/* + * Encode and decode a swap entry + * + * Constraints: + * _PAGE_FILE at bit 0 + * _PAGE_TYPE_* at bits 2-3 (for emulating _PAGE_PROTNONE) + * _PAGE_PRESENT at bit 10 + * + * We encode the type into bits 4-9 and offset into bits 11-31. This + * gives us a 21 bits offset, or 2**21 * 4K = 8G usable swap space per + * device, and 64 possible types. + * + * NOTE: We should set ZEROs at the position of _PAGE_PRESENT + * and _PAGE_PROTNONE bits + */ +#define __swp_type(x) (((x).val >> 4) & 0x3f) +#define __swp_offset(x) ((x).val >> 11) +#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 4) | ((offset) << 11) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +/* + * Encode and decode a nonlinear file mapping entry. We have to + * preserve _PAGE_FILE and _PAGE_PRESENT here. _PAGE_TYPE_* isn't + * necessary, since _PAGE_FILE implies !_PAGE_PROTNONE (?) + */ +#define PTE_FILE_MAX_BITS 30 +#define pte_to_pgoff(pte) (((pte_val(pte) >> 1) & 0x1ff) \ + | ((pte_val(pte) >> 11) << 9)) +#define pgoff_to_pte(off) ((pte_t) { ((((off) & 0x1ff) << 1) \ + | (((off) >> 9) << 11) \ + | _PAGE_FILE) }) + +typedef pte_t *pte_addr_t; + +#define kern_addr_valid(addr) (1) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +/* No page table caches to initialize (?) */ +#define pgtable_cache_init() do { } while(0) + +#include + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_AVR32_PGTABLE_H */ diff --git a/arch/avr32/include/asm/poll.h b/arch/avr32/include/asm/poll.h new file mode 100644 index 000000000000..c98509d3149e --- /dev/null +++ b/arch/avr32/include/asm/poll.h @@ -0,0 +1 @@ +#include diff --git a/arch/avr32/include/asm/posix_types.h b/arch/avr32/include/asm/posix_types.h new file mode 100644 index 000000000000..fe0c0c014389 --- /dev/null +++ b/arch/avr32/include/asm/posix_types.h @@ -0,0 +1,125 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_POSIX_TYPES_H +#define __ASM_AVR32_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#if defined(__KERNEL__) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) */ + +#endif /* __ASM_AVR32_POSIX_TYPES_H */ diff --git a/arch/avr32/include/asm/processor.h b/arch/avr32/include/asm/processor.h new file mode 100644 index 000000000000..49a88f5a9d2f --- /dev/null +++ b/arch/avr32/include/asm/processor.h @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_PROCESSOR_H +#define __ASM_AVR32_PROCESSOR_H + +#include +#include + +#define TASK_SIZE 0x80000000 + +#ifdef __KERNEL__ +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP +#endif + +#ifndef __ASSEMBLY__ + +static inline void *current_text_addr(void) +{ + register void *pc asm("pc"); + return pc; +} + +enum arch_type { + ARCH_AVR32A, + ARCH_AVR32B, + ARCH_MAX +}; + +enum cpu_type { + CPU_MORGAN, + CPU_AT32AP, + CPU_MAX +}; + +enum tlb_config { + TLB_NONE, + TLB_SPLIT, + TLB_UNIFIED, + TLB_INVALID +}; + +#define AVR32_FEATURE_RMW (1 << 0) +#define AVR32_FEATURE_DSP (1 << 1) +#define AVR32_FEATURE_SIMD (1 << 2) +#define AVR32_FEATURE_OCD (1 << 3) +#define AVR32_FEATURE_PCTR (1 << 4) +#define AVR32_FEATURE_JAVA (1 << 5) +#define AVR32_FEATURE_FPU (1 << 6) + +struct avr32_cpuinfo { + struct clk *clk; + unsigned long loops_per_jiffy; + enum arch_type arch_type; + enum cpu_type cpu_type; + unsigned short arch_revision; + unsigned short cpu_revision; + enum tlb_config tlb_config; + unsigned long features; + u32 device_id; + + struct cache_info icache; + struct cache_info dcache; +}; + +static inline unsigned int avr32_get_manufacturer_id(struct avr32_cpuinfo *cpu) +{ + return (cpu->device_id >> 1) & 0x7f; +} +static inline unsigned int avr32_get_product_number(struct avr32_cpuinfo *cpu) +{ + return (cpu->device_id >> 12) & 0xffff; +} +static inline unsigned int avr32_get_chip_revision(struct avr32_cpuinfo *cpu) +{ + return (cpu->device_id >> 28) & 0x0f; +} + +extern struct avr32_cpuinfo boot_cpu_data; + +#ifdef CONFIG_SMP +extern struct avr32_cpuinfo cpu_data[]; +#define current_cpu_data cpu_data[smp_processor_id()] +#else +#define cpu_data (&boot_cpu_data) +#define current_cpu_data boot_cpu_data +#endif + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's + */ +#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3)) + +#define cpu_relax() barrier() +#define cpu_sync_pipeline() asm volatile("sub pc, -2" : : : "memory") + +struct cpu_context { + unsigned long sr; + unsigned long pc; + unsigned long ksp; /* Kernel stack pointer */ + unsigned long r7; + unsigned long r6; + unsigned long r5; + unsigned long r4; + unsigned long r3; + unsigned long r2; + unsigned long r1; + unsigned long r0; +}; + +/* This struct contains the CPU context as stored by switch_to() */ +struct thread_struct { + struct cpu_context cpu_context; + unsigned long single_step_addr; + u16 single_step_insn; +}; + +#define INIT_THREAD { \ + .cpu_context = { \ + .ksp = sizeof(init_stack) + (long)&init_stack, \ + }, \ +} + +/* + * Do necessary setup to start up a newly executed thread. + */ +#define start_thread(regs, new_pc, new_sp) \ + do { \ + set_fs(USER_DS); \ + memset(regs, 0, sizeof(*regs)); \ + regs->sr = MODE_USER; \ + regs->pc = new_pc & ~1; \ + regs->sp = new_sp; \ + } while(0) + +struct task_struct; + +/* Free all resources held by a thread */ +extern void release_thread(struct task_struct *); + +/* Create a kernel thread without removing it from tasklists */ +extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while(0) + +/* Return saved PC of a blocked thread */ +#define thread_saved_pc(tsk) ((tsk)->thread.cpu_context.pc) + +struct pt_regs; +extern unsigned long get_wchan(struct task_struct *p); +extern void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl); +extern void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp, + struct pt_regs *regs, const char *log_lvl); + +#define task_pt_regs(p) \ + ((struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1) + +#define KSTK_EIP(tsk) ((tsk)->thread.cpu_context.pc) +#define KSTK_ESP(tsk) ((tsk)->thread.cpu_context.ksp) + +#define ARCH_HAS_PREFETCH + +static inline void prefetch(const void *x) +{ + const char *c = x; + asm volatile("pref %0" : : "r"(c)); +} +#define PREFETCH_STRIDE L1_CACHE_BYTES + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_AVR32_PROCESSOR_H */ diff --git a/arch/avr32/include/asm/ptrace.h b/arch/avr32/include/asm/ptrace.h new file mode 100644 index 000000000000..9e2d44f4e0fe --- /dev/null +++ b/arch/avr32/include/asm/ptrace.h @@ -0,0 +1,157 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_PTRACE_H +#define __ASM_AVR32_PTRACE_H + +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 + +/* + * Status Register bits + */ +#define SR_H 0x20000000 +#define SR_J 0x10000000 +#define SR_DM 0x08000000 +#define SR_D 0x04000000 +#define MODE_NMI 0x01c00000 +#define MODE_EXCEPTION 0x01800000 +#define MODE_INT3 0x01400000 +#define MODE_INT2 0x01000000 +#define MODE_INT1 0x00c00000 +#define MODE_INT0 0x00800000 +#define MODE_SUPERVISOR 0x00400000 +#define MODE_USER 0x00000000 +#define MODE_MASK 0x01c00000 +#define SR_EM 0x00200000 +#define SR_I3M 0x00100000 +#define SR_I2M 0x00080000 +#define SR_I1M 0x00040000 +#define SR_I0M 0x00020000 +#define SR_GM 0x00010000 + +#define SR_H_BIT 29 +#define SR_J_BIT 28 +#define SR_DM_BIT 27 +#define SR_D_BIT 26 +#define MODE_SHIFT 22 +#define SR_EM_BIT 21 +#define SR_I3M_BIT 20 +#define SR_I2M_BIT 19 +#define SR_I1M_BIT 18 +#define SR_I0M_BIT 17 +#define SR_GM_BIT 16 + +/* The user-visible part */ +#define SR_L 0x00000020 +#define SR_Q 0x00000010 +#define SR_V 0x00000008 +#define SR_N 0x00000004 +#define SR_Z 0x00000002 +#define SR_C 0x00000001 + +#define SR_L_BIT 5 +#define SR_Q_BIT 4 +#define SR_V_BIT 3 +#define SR_N_BIT 2 +#define SR_Z_BIT 1 +#define SR_C_BIT 0 + +/* + * The order is defined by the stmts instruction. r0 is stored first, + * so it gets the highest address. + * + * Registers 0-12 are general-purpose registers (r12 is normally used for + * the function return value). + * Register 13 is the stack pointer + * Register 14 is the link register + * Register 15 is the program counter (retrieved from the RAR sysreg) + */ +#define FRAME_SIZE_FULL 72 +#define REG_R12_ORIG 68 +#define REG_R0 64 +#define REG_R1 60 +#define REG_R2 56 +#define REG_R3 52 +#define REG_R4 48 +#define REG_R5 44 +#define REG_R6 40 +#define REG_R7 36 +#define REG_R8 32 +#define REG_R9 28 +#define REG_R10 24 +#define REG_R11 20 +#define REG_R12 16 +#define REG_SP 12 +#define REG_LR 8 + +#define FRAME_SIZE_MIN 8 +#define REG_PC 4 +#define REG_SR 0 + +#ifndef __ASSEMBLY__ +struct pt_regs { + /* These are always saved */ + unsigned long sr; + unsigned long pc; + + /* These are sometimes saved */ + unsigned long lr; + unsigned long sp; + unsigned long r12; + unsigned long r11; + unsigned long r10; + unsigned long r9; + unsigned long r8; + unsigned long r7; + unsigned long r6; + unsigned long r5; + unsigned long r4; + unsigned long r3; + unsigned long r2; + unsigned long r1; + unsigned long r0; + + /* Only saved on system call */ + unsigned long r12_orig; +}; + +#ifdef __KERNEL__ + +#include + +#define arch_ptrace_attach(child) ocd_enable(child) + +#define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER) +#define instruction_pointer(regs) ((regs)->pc) +#define profile_pc(regs) instruction_pointer(regs) + +extern void show_regs (struct pt_regs *); + +static __inline__ int valid_user_regs(struct pt_regs *regs) +{ + /* + * Some of the Java bits might be acceptable if/when we + * implement some support for that stuff... + */ + if ((regs->sr & 0xffff0000) == 0) + return 1; + + /* + * Force status register flags to be sane and report this + * illegal behaviour... + */ + regs->sr &= 0x0000ffff; + return 0; +} + + +#endif /* __KERNEL__ */ + +#endif /* ! __ASSEMBLY__ */ + +#endif /* __ASM_AVR32_PTRACE_H */ diff --git a/arch/avr32/include/asm/resource.h b/arch/avr32/include/asm/resource.h new file mode 100644 index 000000000000..c6dd101472b1 --- /dev/null +++ b/arch/avr32/include/asm/resource.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_RESOURCE_H +#define __ASM_AVR32_RESOURCE_H + +#include + +#endif /* __ASM_AVR32_RESOURCE_H */ diff --git a/arch/avr32/include/asm/scatterlist.h b/arch/avr32/include/asm/scatterlist.h new file mode 100644 index 000000000000..377320e3bd17 --- /dev/null +++ b/arch/avr32/include/asm/scatterlist.h @@ -0,0 +1,26 @@ +#ifndef __ASM_AVR32_SCATTERLIST_H +#define __ASM_AVR32_SCATTERLIST_H + +#include + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + dma_addr_t dma_address; + unsigned int length; +}; + +/* These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#define ISA_DMA_THRESHOLD (0xffffffff) + +#endif /* __ASM_AVR32_SCATTERLIST_H */ diff --git a/arch/avr32/include/asm/sections.h b/arch/avr32/include/asm/sections.h new file mode 100644 index 000000000000..aa14252e4181 --- /dev/null +++ b/arch/avr32/include/asm/sections.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_SECTIONS_H +#define __ASM_AVR32_SECTIONS_H + +#include + +#endif /* __ASM_AVR32_SECTIONS_H */ diff --git a/arch/avr32/include/asm/sembuf.h b/arch/avr32/include/asm/sembuf.h new file mode 100644 index 000000000000..e472216e0c97 --- /dev/null +++ b/arch/avr32/include/asm/sembuf.h @@ -0,0 +1,25 @@ +#ifndef __ASM_AVR32_SEMBUF_H +#define __ASM_AVR32_SEMBUF_H + +/* +* The semid64_ds structure for AVR32 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* __ASM_AVR32_SEMBUF_H */ diff --git a/arch/avr32/include/asm/serial.h b/arch/avr32/include/asm/serial.h new file mode 100644 index 000000000000..5ecaebc22b02 --- /dev/null +++ b/arch/avr32/include/asm/serial.h @@ -0,0 +1,13 @@ +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD (1843200 / 16) + +#endif /* _ASM_SERIAL_H */ diff --git a/arch/avr32/include/asm/setup.h b/arch/avr32/include/asm/setup.h new file mode 100644 index 000000000000..ff5b7cf6be4d --- /dev/null +++ b/arch/avr32/include/asm/setup.h @@ -0,0 +1,138 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * Based on linux/include/asm-arm/setup.h + * Copyright (C) 1997-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_SETUP_H__ +#define __ASM_AVR32_SETUP_H__ + +#define COMMAND_LINE_SIZE 256 + +#ifdef __KERNEL__ + +/* Magic number indicating that a tag table is present */ +#define ATAG_MAGIC 0xa2a25441 + +#ifndef __ASSEMBLY__ + +/* + * Generic memory range, used by several tags. + * + * addr is always physical. + * size is measured in bytes. + * next is for use by the OS, e.g. for grouping regions into + * linked lists. + */ +struct tag_mem_range { + u32 addr; + u32 size; + struct tag_mem_range * next; +}; + +/* The list ends with an ATAG_NONE node. */ +#define ATAG_NONE 0x00000000 + +struct tag_header { + u32 size; + u32 tag; +}; + +/* The list must start with an ATAG_CORE node */ +#define ATAG_CORE 0x54410001 + +struct tag_core { + u32 flags; + u32 pagesize; + u32 rootdev; +}; + +/* it is allowed to have multiple ATAG_MEM nodes */ +#define ATAG_MEM 0x54410002 +/* ATAG_MEM uses tag_mem_range */ + +/* command line: \0 terminated string */ +#define ATAG_CMDLINE 0x54410003 + +struct tag_cmdline { + char cmdline[1]; /* this is the minimum size */ +}; + +/* Ramdisk image (may be compressed) */ +#define ATAG_RDIMG 0x54410004 +/* ATAG_RDIMG uses tag_mem_range */ + +/* Information about various clocks present in the system */ +#define ATAG_CLOCK 0x54410005 + +struct tag_clock { + u32 clock_id; /* Which clock are we talking about? */ + u32 clock_flags; /* Special features */ + u64 clock_hz; /* Clock speed in Hz */ +}; + +/* The clock types we know about */ +#define CLOCK_BOOTCPU 0 + +/* Memory reserved for the system (e.g. the bootloader) */ +#define ATAG_RSVD_MEM 0x54410006 +/* ATAG_RSVD_MEM uses tag_mem_range */ + +/* Ethernet information */ + +#define ATAG_ETHERNET 0x54410007 + +struct tag_ethernet { + u8 mac_index; + u8 mii_phy_addr; + u8 hw_address[6]; +}; + +#define ETH_INVALID_PHY 0xff + +struct tag { + struct tag_header hdr; + union { + struct tag_core core; + struct tag_mem_range mem_range; + struct tag_cmdline cmdline; + struct tag_clock clock; + struct tag_ethernet ethernet; + } u; +}; + +struct tagtable { + u32 tag; + int (*parse)(struct tag *); +}; + +#define __tag __used __attribute__((__section__(".taglist.init"))) +#define __tagtable(tag, fn) \ + static struct tagtable __tagtable_##fn __tag = { tag, fn } + +#define tag_member_present(tag,member) \ + ((unsigned long)(&((struct tag *)0L)->member + 1) \ + <= (tag)->hdr.size * 4) + +#define tag_next(t) ((struct tag *)((u32 *)(t) + (t)->hdr.size)) +#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2) + +#define for_each_tag(t,base) \ + for (t = base; t->hdr.size; t = tag_next(t)) + +extern struct tag *bootloader_tags; + +extern resource_size_t fbmem_start; +extern resource_size_t fbmem_size; + +void setup_processor(void); + +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* __ASM_AVR32_SETUP_H__ */ diff --git a/arch/avr32/include/asm/shmbuf.h b/arch/avr32/include/asm/shmbuf.h new file mode 100644 index 000000000000..c62fba41739a --- /dev/null +++ b/arch/avr32/include/asm/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef __ASM_AVR32_SHMBUF_H +#define __ASM_AVR32_SHMBUF_H + +/* + * The shmid64_ds structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* __ASM_AVR32_SHMBUF_H */ diff --git a/arch/avr32/include/asm/shmparam.h b/arch/avr32/include/asm/shmparam.h new file mode 100644 index 000000000000..3681266c77f7 --- /dev/null +++ b/arch/avr32/include/asm/shmparam.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_SHMPARAM_H +#define __ASM_AVR32_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* __ASM_AVR32_SHMPARAM_H */ diff --git a/arch/avr32/include/asm/sigcontext.h b/arch/avr32/include/asm/sigcontext.h new file mode 100644 index 000000000000..e04062b5f39f --- /dev/null +++ b/arch/avr32/include/asm/sigcontext.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_SIGCONTEXT_H +#define __ASM_AVR32_SIGCONTEXT_H + +struct sigcontext { + unsigned long oldmask; + + /* CPU registers */ + unsigned long sr; + unsigned long pc; + unsigned long lr; + unsigned long sp; + unsigned long r12; + unsigned long r11; + unsigned long r10; + unsigned long r9; + unsigned long r8; + unsigned long r7; + unsigned long r6; + unsigned long r5; + unsigned long r4; + unsigned long r3; + unsigned long r2; + unsigned long r1; + unsigned long r0; +}; + +#endif /* __ASM_AVR32_SIGCONTEXT_H */ diff --git a/arch/avr32/include/asm/siginfo.h b/arch/avr32/include/asm/siginfo.h new file mode 100644 index 000000000000..5ee93f40a8a8 --- /dev/null +++ b/arch/avr32/include/asm/siginfo.h @@ -0,0 +1,6 @@ +#ifndef _AVR32_SIGINFO_H +#define _AVR32_SIGINFO_H + +#include + +#endif diff --git a/arch/avr32/include/asm/signal.h b/arch/avr32/include/asm/signal.h new file mode 100644 index 000000000000..caffefeeba1f --- /dev/null +++ b/arch/avr32/include/asm/signal.h @@ -0,0 +1,168 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_SIGNAL_H +#define __ASM_AVR32_SIGNAL_H + +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX (_NSIG-1) + +/* + * SA_FLAGS values: + * + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_SIGINFO deliver the signal with SIGINFO structs + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NODEFER prevents the current signal from being masked in the handler. + * SA_RESETHAND clears the handler when the signal is delivered. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_RESTORER 0x04000000 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + __sigrestore_t sa_restorer; +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + __sigrestore_t sa_restorer; + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ + +#include +#undef __HAVE_ARCH_SIG_BITOPS + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/asm/socket.h new file mode 100644 index 000000000000..35863f260929 --- /dev/null +++ b/arch/avr32/include/asm/socket.h @@ -0,0 +1,57 @@ +#ifndef __ASM_AVR32_SOCKET_H +#define __ASM_AVR32_SOCKET_H + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#endif /* __ASM_AVR32_SOCKET_H */ diff --git a/arch/avr32/include/asm/sockios.h b/arch/avr32/include/asm/sockios.h new file mode 100644 index 000000000000..0802d742f97d --- /dev/null +++ b/arch/avr32/include/asm/sockios.h @@ -0,0 +1,13 @@ +#ifndef __ASM_AVR32_SOCKIOS_H +#define __ASM_AVR32_SOCKIOS_H + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* __ASM_AVR32_SOCKIOS_H */ diff --git a/arch/avr32/include/asm/stat.h b/arch/avr32/include/asm/stat.h new file mode 100644 index 000000000000..e72881e10230 --- /dev/null +++ b/arch/avr32/include/asm/stat.h @@ -0,0 +1,79 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_STAT_H +#define __ASM_AVR32_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned long st_rdev; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +#define STAT_HAVE_NSEC 1 + +struct stat64 { + unsigned long long st_dev; + + unsigned long long st_ino; + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + + long long st_size; + unsigned long __pad1; /* align 64-bit st_blocks */ + unsigned long st_blksize; + + unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __ASM_AVR32_STAT_H */ diff --git a/arch/avr32/include/asm/statfs.h b/arch/avr32/include/asm/statfs.h new file mode 100644 index 000000000000..2961bd18c50e --- /dev/null +++ b/arch/avr32/include/asm/statfs.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_STATFS_H +#define __ASM_AVR32_STATFS_H + +#include + +#endif /* __ASM_AVR32_STATFS_H */ diff --git a/arch/avr32/include/asm/string.h b/arch/avr32/include/asm/string.h new file mode 100644 index 000000000000..c91a623cd585 --- /dev/null +++ b/arch/avr32/include/asm/string.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_STRING_H +#define __ASM_AVR32_STRING_H + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *b, int c, size_t len); + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *to, const void *from, size_t len); + +#endif /* __ASM_AVR32_STRING_H */ diff --git a/arch/avr32/include/asm/sysreg.h b/arch/avr32/include/asm/sysreg.h new file mode 100644 index 000000000000..d4e0950170ca --- /dev/null +++ b/arch/avr32/include/asm/sysreg.h @@ -0,0 +1,291 @@ +/* + * AVR32 System Registers + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_SYSREG_H +#define __ASM_AVR32_SYSREG_H + +/* sysreg register offsets */ +#define SYSREG_SR 0x0000 +#define SYSREG_EVBA 0x0004 +#define SYSREG_ACBA 0x0008 +#define SYSREG_CPUCR 0x000c +#define SYSREG_ECR 0x0010 +#define SYSREG_RSR_SUP 0x0014 +#define SYSREG_RSR_INT0 0x0018 +#define SYSREG_RSR_INT1 0x001c +#define SYSREG_RSR_INT2 0x0020 +#define SYSREG_RSR_INT3 0x0024 +#define SYSREG_RSR_EX 0x0028 +#define SYSREG_RSR_NMI 0x002c +#define SYSREG_RSR_DBG 0x0030 +#define SYSREG_RAR_SUP 0x0034 +#define SYSREG_RAR_INT0 0x0038 +#define SYSREG_RAR_INT1 0x003c +#define SYSREG_RAR_INT2 0x0040 +#define SYSREG_RAR_INT3 0x0044 +#define SYSREG_RAR_EX 0x0048 +#define SYSREG_RAR_NMI 0x004c +#define SYSREG_RAR_DBG 0x0050 +#define SYSREG_JECR 0x0054 +#define SYSREG_JOSP 0x0058 +#define SYSREG_JAVA_LV0 0x005c +#define SYSREG_JAVA_LV1 0x0060 +#define SYSREG_JAVA_LV2 0x0064 +#define SYSREG_JAVA_LV3 0x0068 +#define SYSREG_JAVA_LV4 0x006c +#define SYSREG_JAVA_LV5 0x0070 +#define SYSREG_JAVA_LV6 0x0074 +#define SYSREG_JAVA_LV7 0x0078 +#define SYSREG_JTBA 0x007c +#define SYSREG_JBCR 0x0080 +#define SYSREG_CONFIG0 0x0100 +#define SYSREG_CONFIG1 0x0104 +#define SYSREG_COUNT 0x0108 +#define SYSREG_COMPARE 0x010c +#define SYSREG_TLBEHI 0x0110 +#define SYSREG_TLBELO 0x0114 +#define SYSREG_PTBR 0x0118 +#define SYSREG_TLBEAR 0x011c +#define SYSREG_MMUCR 0x0120 +#define SYSREG_TLBARLO 0x0124 +#define SYSREG_TLBARHI 0x0128 +#define SYSREG_PCCNT 0x012c +#define SYSREG_PCNT0 0x0130 +#define SYSREG_PCNT1 0x0134 +#define SYSREG_PCCR 0x0138 +#define SYSREG_BEAR 0x013c +#define SYSREG_SABAL 0x0300 +#define SYSREG_SABAH 0x0304 +#define SYSREG_SABD 0x0308 + +/* Bitfields in SR */ +#define SYSREG_SR_C_OFFSET 0 +#define SYSREG_SR_C_SIZE 1 +#define SYSREG_Z_OFFSET 1 +#define SYSREG_Z_SIZE 1 +#define SYSREG_SR_N_OFFSET 2 +#define SYSREG_SR_N_SIZE 1 +#define SYSREG_SR_V_OFFSET 3 +#define SYSREG_SR_V_SIZE 1 +#define SYSREG_Q_OFFSET 4 +#define SYSREG_Q_SIZE 1 +#define SYSREG_L_OFFSET 5 +#define SYSREG_L_SIZE 1 +#define SYSREG_T_OFFSET 14 +#define SYSREG_T_SIZE 1 +#define SYSREG_SR_R_OFFSET 15 +#define SYSREG_SR_R_SIZE 1 +#define SYSREG_GM_OFFSET 16 +#define SYSREG_GM_SIZE 1 +#define SYSREG_I0M_OFFSET 17 +#define SYSREG_I0M_SIZE 1 +#define SYSREG_I1M_OFFSET 18 +#define SYSREG_I1M_SIZE 1 +#define SYSREG_I2M_OFFSET 19 +#define SYSREG_I2M_SIZE 1 +#define SYSREG_I3M_OFFSET 20 +#define SYSREG_I3M_SIZE 1 +#define SYSREG_EM_OFFSET 21 +#define SYSREG_EM_SIZE 1 +#define SYSREG_MODE_OFFSET 22 +#define SYSREG_MODE_SIZE 3 +#define SYSREG_M0_OFFSET 22 +#define SYSREG_M0_SIZE 1 +#define SYSREG_M1_OFFSET 23 +#define SYSREG_M1_SIZE 1 +#define SYSREG_M2_OFFSET 24 +#define SYSREG_M2_SIZE 1 +#define SYSREG_SR_D_OFFSET 26 +#define SYSREG_SR_D_SIZE 1 +#define SYSREG_DM_OFFSET 27 +#define SYSREG_DM_SIZE 1 +#define SYSREG_SR_J_OFFSET 28 +#define SYSREG_SR_J_SIZE 1 +#define SYSREG_H_OFFSET 29 +#define SYSREG_H_SIZE 1 + +/* Bitfields in CPUCR */ +#define SYSREG_BI_OFFSET 0 +#define SYSREG_BI_SIZE 1 +#define SYSREG_BE_OFFSET 1 +#define SYSREG_BE_SIZE 1 +#define SYSREG_FE_OFFSET 2 +#define SYSREG_FE_SIZE 1 +#define SYSREG_RE_OFFSET 3 +#define SYSREG_RE_SIZE 1 +#define SYSREG_IBE_OFFSET 4 +#define SYSREG_IBE_SIZE 1 +#define SYSREG_IEE_OFFSET 5 +#define SYSREG_IEE_SIZE 1 + +/* Bitfields in CONFIG0 */ +#define SYSREG_CONFIG0_R_OFFSET 0 +#define SYSREG_CONFIG0_R_SIZE 1 +#define SYSREG_CONFIG0_D_OFFSET 1 +#define SYSREG_CONFIG0_D_SIZE 1 +#define SYSREG_CONFIG0_S_OFFSET 2 +#define SYSREG_CONFIG0_S_SIZE 1 +#define SYSREG_CONFIG0_O_OFFSET 3 +#define SYSREG_CONFIG0_O_SIZE 1 +#define SYSREG_CONFIG0_P_OFFSET 4 +#define SYSREG_CONFIG0_P_SIZE 1 +#define SYSREG_CONFIG0_J_OFFSET 5 +#define SYSREG_CONFIG0_J_SIZE 1 +#define SYSREG_CONFIG0_F_OFFSET 6 +#define SYSREG_CONFIG0_F_SIZE 1 +#define SYSREG_MMUT_OFFSET 7 +#define SYSREG_MMUT_SIZE 3 +#define SYSREG_AR_OFFSET 10 +#define SYSREG_AR_SIZE 3 +#define SYSREG_AT_OFFSET 13 +#define SYSREG_AT_SIZE 3 +#define SYSREG_PROCESSORREVISION_OFFSET 16 +#define SYSREG_PROCESSORREVISION_SIZE 8 +#define SYSREG_PROCESSORID_OFFSET 24 +#define SYSREG_PROCESSORID_SIZE 8 + +/* Bitfields in CONFIG1 */ +#define SYSREG_DASS_OFFSET 0 +#define SYSREG_DASS_SIZE 3 +#define SYSREG_DLSZ_OFFSET 3 +#define SYSREG_DLSZ_SIZE 3 +#define SYSREG_DSET_OFFSET 6 +#define SYSREG_DSET_SIZE 4 +#define SYSREG_IASS_OFFSET 10 +#define SYSREG_IASS_SIZE 3 +#define SYSREG_ILSZ_OFFSET 13 +#define SYSREG_ILSZ_SIZE 3 +#define SYSREG_ISET_OFFSET 16 +#define SYSREG_ISET_SIZE 4 +#define SYSREG_DMMUSZ_OFFSET 20 +#define SYSREG_DMMUSZ_SIZE 6 +#define SYSREG_IMMUSZ_OFFSET 26 +#define SYSREG_IMMUSZ_SIZE 6 + +/* Bitfields in TLBEHI */ +#define SYSREG_ASID_OFFSET 0 +#define SYSREG_ASID_SIZE 8 +#define SYSREG_TLBEHI_I_OFFSET 8 +#define SYSREG_TLBEHI_I_SIZE 1 +#define SYSREG_TLBEHI_V_OFFSET 9 +#define SYSREG_TLBEHI_V_SIZE 1 +#define SYSREG_VPN_OFFSET 10 +#define SYSREG_VPN_SIZE 22 + +/* Bitfields in TLBELO */ +#define SYSREG_W_OFFSET 0 +#define SYSREG_W_SIZE 1 +#define SYSREG_TLBELO_D_OFFSET 1 +#define SYSREG_TLBELO_D_SIZE 1 +#define SYSREG_SZ_OFFSET 2 +#define SYSREG_SZ_SIZE 2 +#define SYSREG_AP_OFFSET 4 +#define SYSREG_AP_SIZE 3 +#define SYSREG_B_OFFSET 7 +#define SYSREG_B_SIZE 1 +#define SYSREG_G_OFFSET 8 +#define SYSREG_G_SIZE 1 +#define SYSREG_TLBELO_C_OFFSET 9 +#define SYSREG_TLBELO_C_SIZE 1 +#define SYSREG_PFN_OFFSET 10 +#define SYSREG_PFN_SIZE 22 + +/* Bitfields in MMUCR */ +#define SYSREG_E_OFFSET 0 +#define SYSREG_E_SIZE 1 +#define SYSREG_M_OFFSET 1 +#define SYSREG_M_SIZE 1 +#define SYSREG_MMUCR_I_OFFSET 2 +#define SYSREG_MMUCR_I_SIZE 1 +#define SYSREG_MMUCR_N_OFFSET 3 +#define SYSREG_MMUCR_N_SIZE 1 +#define SYSREG_MMUCR_S_OFFSET 4 +#define SYSREG_MMUCR_S_SIZE 1 +#define SYSREG_DLA_OFFSET 8 +#define SYSREG_DLA_SIZE 6 +#define SYSREG_DRP_OFFSET 14 +#define SYSREG_DRP_SIZE 6 +#define SYSREG_ILA_OFFSET 20 +#define SYSREG_ILA_SIZE 6 +#define SYSREG_IRP_OFFSET 26 +#define SYSREG_IRP_SIZE 6 + +/* Bitfields in PCCR */ +#define SYSREG_PCCR_E_OFFSET 0 +#define SYSREG_PCCR_E_SIZE 1 +#define SYSREG_PCCR_R_OFFSET 1 +#define SYSREG_PCCR_R_SIZE 1 +#define SYSREG_PCCR_C_OFFSET 2 +#define SYSREG_PCCR_C_SIZE 1 +#define SYSREG_PCCR_S_OFFSET 3 +#define SYSREG_PCCR_S_SIZE 1 +#define SYSREG_IEC_OFFSET 4 +#define SYSREG_IEC_SIZE 1 +#define SYSREG_IE0_OFFSET 5 +#define SYSREG_IE0_SIZE 1 +#define SYSREG_IE1_OFFSET 6 +#define SYSREG_IE1_SIZE 1 +#define SYSREG_FC_OFFSET 8 +#define SYSREG_FC_SIZE 1 +#define SYSREG_F0_OFFSET 9 +#define SYSREG_F0_SIZE 1 +#define SYSREG_F1_OFFSET 10 +#define SYSREG_F1_SIZE 1 +#define SYSREG_CONF0_OFFSET 12 +#define SYSREG_CONF0_SIZE 6 +#define SYSREG_CONF1_OFFSET 18 +#define SYSREG_CONF1_SIZE 6 + +/* Constants for ECR */ +#define ECR_UNRECOVERABLE 0 +#define ECR_TLB_MULTIPLE 1 +#define ECR_BUS_ERROR_WRITE 2 +#define ECR_BUS_ERROR_READ 3 +#define ECR_NMI 4 +#define ECR_ADDR_ALIGN_X 5 +#define ECR_PROTECTION_X 6 +#define ECR_DEBUG 7 +#define ECR_ILLEGAL_OPCODE 8 +#define ECR_UNIMPL_INSTRUCTION 9 +#define ECR_PRIVILEGE_VIOLATION 10 +#define ECR_FPE 11 +#define ECR_COPROC_ABSENT 12 +#define ECR_ADDR_ALIGN_R 13 +#define ECR_ADDR_ALIGN_W 14 +#define ECR_PROTECTION_R 15 +#define ECR_PROTECTION_W 16 +#define ECR_DTLB_MODIFIED 17 +#define ECR_TLB_MISS_X 20 +#define ECR_TLB_MISS_R 24 +#define ECR_TLB_MISS_W 28 + +/* Bit manipulation macros */ +#define SYSREG_BIT(name) \ + (1 << SYSREG_##name##_OFFSET) +#define SYSREG_BF(name,value) \ + (((value) & ((1 << SYSREG_##name##_SIZE) - 1)) \ + << SYSREG_##name##_OFFSET) +#define SYSREG_BFEXT(name,value)\ + (((value) >> SYSREG_##name##_OFFSET) \ + & ((1 << SYSREG_##name##_SIZE) - 1)) +#define SYSREG_BFINS(name,value,old) \ + (((old) & ~(((1 << SYSREG_##name##_SIZE) - 1) \ + << SYSREG_##name##_OFFSET)) \ + | SYSREG_BF(name,value)) + +/* Register access macros */ +#ifdef __CHECKER__ +extern unsigned long __builtin_mfsr(unsigned long reg); +extern void __builtin_mtsr(unsigned long reg, unsigned long value); +#endif + +#define sysreg_read(reg) __builtin_mfsr(SYSREG_##reg) +#define sysreg_write(reg, value) __builtin_mtsr(SYSREG_##reg, value) + +#endif /* __ASM_AVR32_SYSREG_H */ diff --git a/arch/avr32/include/asm/system.h b/arch/avr32/include/asm/system.h new file mode 100644 index 000000000000..9702c2213e1e --- /dev/null +++ b/arch/avr32/include/asm/system.h @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_SYSTEM_H +#define __ASM_AVR32_SYSTEM_H + +#include +#include +#include + +#include +#include + +#define xchg(ptr,x) \ + ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + +#define nop() asm volatile("nop") + +#define mb() asm volatile("" : : : "memory") +#define rmb() mb() +#define wmb() asm volatile("sync 0" : : : "memory") +#define read_barrier_depends() do { } while(0) +#define set_mb(var, value) do { var = value; mb(); } while(0) + +/* + * Help PathFinder and other Nexus-compliant debuggers keep track of + * the current PID by emitting an Ownership Trace Message each time we + * switch task. + */ +#ifdef CONFIG_OWNERSHIP_TRACE +#include +#define finish_arch_switch(prev) \ + do { \ + ocd_write(PID, prev->pid); \ + ocd_write(PID, current->pid); \ + } while(0) +#endif + +/* + * switch_to(prev, next, last) should switch from task `prev' to task + * `next'. `prev' will never be the same as `next'. + * + * We just delegate everything to the __switch_to assembly function, + * which is implemented in arch/avr32/kernel/switch_to.S + * + * mb() tells GCC not to cache `current' across this call. + */ +struct cpu_context; +struct task_struct; +extern struct task_struct *__switch_to(struct task_struct *, + struct cpu_context *, + struct cpu_context *); +#define switch_to(prev, next, last) \ + do { \ + last = __switch_to(prev, &prev->thread.cpu_context + 1, \ + &next->thread.cpu_context); \ + } while (0) + +#ifdef CONFIG_SMP +# error "The AVR32 port does not support SMP" +#else +# define smp_mb() barrier() +# define smp_rmb() barrier() +# define smp_wmb() barrier() +# define smp_read_barrier_depends() do { } while(0) +#endif + +#include + +extern void __xchg_called_with_bad_pointer(void); + +static inline unsigned long xchg_u32(u32 val, volatile u32 *m) +{ + u32 ret; + + asm volatile("xchg %[ret], %[m], %[val]" + : [ret] "=&r"(ret), "=m"(*m) + : "m"(*m), [m] "r"(m), [val] "r"(val) + : "memory"); + return ret; +} + +static inline unsigned long __xchg(unsigned long x, + volatile void *ptr, + int size) +{ + switch(size) { + case 4: + return xchg_u32(x, ptr); + default: + __xchg_called_with_bad_pointer(); + return x; + } +} + +static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old, + unsigned long new) +{ + __u32 ret; + + asm volatile( + "1: ssrf 5\n" + " ld.w %[ret], %[m]\n" + " cp.w %[ret], %[old]\n" + " brne 2f\n" + " stcond %[m], %[new]\n" + " brne 1b\n" + "2:\n" + : [ret] "=&r"(ret), [m] "=m"(*m) + : "m"(m), [old] "ir"(old), [new] "r"(new) + : "memory", "cc"); + return ret; +} + +extern unsigned long __cmpxchg_u64_unsupported_on_32bit_kernels( + volatile int * m, unsigned long old, unsigned long new); +#define __cmpxchg_u64 __cmpxchg_u64_unsupported_on_32bit_kernels + +/* This function doesn't exist, so you'll get a linker error + if something tries to do an invalid cmpxchg(). */ +extern void __cmpxchg_called_with_bad_pointer(void); + +#define __HAVE_ARCH_CMPXCHG 1 + +static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32(ptr, old, new); + case 8: + return __cmpxchg_u64(ptr, old, new); + } + + __cmpxchg_called_with_bad_pointer(); + return old; +} + +#define cmpxchg(ptr, old, new) \ + ((typeof(*(ptr)))__cmpxchg((ptr), (unsigned long)(old), \ + (unsigned long)(new), \ + sizeof(*(ptr)))) + +#include + +static inline unsigned long __cmpxchg_local(volatile void *ptr, + unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32(ptr, old, new); + default: + return __cmpxchg_local_generic(ptr, old, new, size); + } + + return old; +} + +#define cmpxchg_local(ptr, old, new) \ + ((typeof(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(old), \ + (unsigned long)(new), \ + sizeof(*(ptr)))) + +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +struct pt_regs; +void NORET_TYPE die(const char *str, struct pt_regs *regs, long err); +void _exception(long signr, struct pt_regs *regs, int code, + unsigned long addr); + +#define arch_align_stack(x) (x) + +#endif /* __ASM_AVR32_SYSTEM_H */ diff --git a/arch/avr32/include/asm/termbits.h b/arch/avr32/include/asm/termbits.h new file mode 100644 index 000000000000..db2daab31fdb --- /dev/null +++ b/arch/avr32/include/asm/termbits.h @@ -0,0 +1,195 @@ +#ifndef __ASM_AVR32_TERMBITS_H +#define __ASM_AVR32_TERMBITS_H + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate (not used) */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* __ASM_AVR32_TERMBITS_H */ diff --git a/arch/avr32/include/asm/termios.h b/arch/avr32/include/asm/termios.h new file mode 100644 index 000000000000..0152aba35154 --- /dev/null +++ b/arch/avr32/include/asm/termios.h @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_TERMIOS_H +#define __ASM_AVR32_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +#ifdef __KERNEL__ +/* intr=^C quit=^\ erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" + +#include + +#endif /* __KERNEL__ */ + +#endif /* __ASM_AVR32_TERMIOS_H */ diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h new file mode 100644 index 000000000000..294b25f9323d --- /dev/null +++ b/arch/avr32/include/asm/thread_info.h @@ -0,0 +1,115 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_THREAD_INFO_H +#define __ASM_AVR32_THREAD_INFO_H + +#include + +#define THREAD_SIZE_ORDER 1 +#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) + +#ifndef __ASSEMBLY__ +#include + +struct task_struct; +struct exec_domain; + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + __u32 cpu; + __s32 preempt_count; /* 0 => preemptable, <0 => BUG */ + __u32 rar_saved; /* return address... */ + __u32 rsr_saved; /* ...and status register + saved by debug handler + when setting up + trampoline */ + struct restart_block restart_block; + __u8 supervisor_stack[0]; +}; + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .restart_block = { \ + .fn = do_no_restart_syscall \ + } \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* + * Get the thread information struct from C. + * We do the usual trick and use the lower end of the stack for this + */ +static inline struct thread_info *current_thread_info(void) +{ + unsigned long addr = ~(THREAD_SIZE - 1); + + asm("and %0, sp" : "=r"(addr) : "0"(addr)); + return (struct thread_info *)addr; +} + +#define get_thread_info(ti) get_task_struct((ti)->task) +#define put_thread_info(ti) put_task_struct((ti)->task) + +#endif /* !__ASSEMBLY__ */ + +#define PREEMPT_ACTIVE 0x40000000 + +/* + * Thread information flags + * - these are process state flags that various assembly files may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling + TIF_NEED_RESCHED */ +#define TIF_BREAKPOINT 4 /* enter monitor mode on return */ +#define TIF_SINGLE_STEP 5 /* single step in progress */ +#define TIF_MEMDIE 6 +#define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */ +#define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */ +#define TIF_FREEZE 29 +#define TIF_DEBUG 30 /* debugging enabled */ +#define TIF_USERSPACE 31 /* true if FS sets userspace */ + +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) +#define _TIF_SINGLE_STEP (1 << TIF_SINGLE_STEP) +#define _TIF_MEMDIE (1 << TIF_MEMDIE) +#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) +#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP) + +/* Note: The masks below must never span more than 16 bits! */ + +/* work to do on interrupt/exception return */ +#define _TIF_WORK_MASK \ + ((1 << TIF_SIGPENDING) \ + | (1 << TIF_NEED_RESCHED) \ + | (1 << TIF_POLLING_NRFLAG) \ + | (1 << TIF_BREAKPOINT) \ + | (1 << TIF_RESTORE_SIGMASK)) + +/* work to do on any return to userspace */ +#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE)) +/* work to do on return from debug mode */ +#define _TIF_DBGWORK_MASK (_TIF_WORK_MASK & ~(1 << TIF_BREAKPOINT)) + +#endif /* __ASM_AVR32_THREAD_INFO_H */ diff --git a/arch/avr32/include/asm/timex.h b/arch/avr32/include/asm/timex.h new file mode 100644 index 000000000000..187dcf38b210 --- /dev/null +++ b/arch/avr32/include/asm/timex.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_TIMEX_H +#define __ASM_AVR32_TIMEX_H + +/* + * This is the frequency of the timer used for Linux's timer interrupt. + * The value should be defined as accurate as possible or under certain + * circumstances Linux timekeeping might become inaccurate or fail. + * + * For many system the exact clockrate of the timer isn't known but due to + * the way this value is used we can get away with a wrong value as long + * as this value is: + * + * - a multiple of HZ + * - a divisor of the actual rate + * + * 500000 is a good such cheat value. + * + * The obscure number 1193182 is the same as used by the original i8254 + * time in legacy PC hardware; the chip is never found in AVR32 systems. + */ +#define CLOCK_TICK_RATE 500000 /* Underlying HZ */ + +typedef unsigned long cycles_t; + +static inline cycles_t get_cycles (void) +{ + return 0; +} + +#define ARCH_HAS_READ_CURRENT_TIMER + +#endif /* __ASM_AVR32_TIMEX_H */ diff --git a/arch/avr32/include/asm/tlb.h b/arch/avr32/include/asm/tlb.h new file mode 100644 index 000000000000..5c55f9ce7c7d --- /dev/null +++ b/arch/avr32/include/asm/tlb.h @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_TLB_H +#define __ASM_AVR32_TLB_H + +#define tlb_start_vma(tlb, vma) \ + flush_cache_range(vma, vma->vm_start, vma->vm_end) + +#define tlb_end_vma(tlb, vma) \ + flush_tlb_range(vma, vma->vm_start, vma->vm_end) + +#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while(0) + +/* + * Flush whole TLB for MM + */ +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#include + +/* + * For debugging purposes + */ +extern void show_dtlb_entry(unsigned int index); +extern void dump_dtlb(void); + +#endif /* __ASM_AVR32_TLB_H */ diff --git a/arch/avr32/include/asm/tlbflush.h b/arch/avr32/include/asm/tlbflush.h new file mode 100644 index 000000000000..bf90a786f6be --- /dev/null +++ b/arch/avr32/include/asm/tlbflush.h @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_TLBFLUSH_H +#define __ASM_AVR32_TLBFLUSH_H + +#include + +/* + * TLB flushing: + * + * - flush_tlb() flushes the current mm struct TLBs + * - flush_tlb_all() flushes all processes' TLB entries + * - flush_tlb_mm(mm) flushes the specified mm context TLBs + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + */ +extern void flush_tlb(void); +extern void flush_tlb_all(void); +extern void flush_tlb_mm(struct mm_struct *mm); +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page); + +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); + +#endif /* __ASM_AVR32_TLBFLUSH_H */ diff --git a/arch/avr32/include/asm/topology.h b/arch/avr32/include/asm/topology.h new file mode 100644 index 000000000000..5b766cbb4806 --- /dev/null +++ b/arch/avr32/include/asm/topology.h @@ -0,0 +1,6 @@ +#ifndef __ASM_AVR32_TOPOLOGY_H +#define __ASM_AVR32_TOPOLOGY_H + +#include + +#endif /* __ASM_AVR32_TOPOLOGY_H */ diff --git a/arch/avr32/include/asm/traps.h b/arch/avr32/include/asm/traps.h new file mode 100644 index 000000000000..6a8fb944f414 --- /dev/null +++ b/arch/avr32/include/asm/traps.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_TRAPS_H +#define __ASM_AVR32_TRAPS_H + +#include + +struct undef_hook { + struct list_head node; + u32 insn_mask; + u32 insn_val; + int (*fn)(struct pt_regs *regs, u32 insn); +}; + +void register_undef_hook(struct undef_hook *hook); +void unregister_undef_hook(struct undef_hook *hook); + +#endif /* __ASM_AVR32_TRAPS_H */ diff --git a/arch/avr32/include/asm/types.h b/arch/avr32/include/asm/types.h new file mode 100644 index 000000000000..9cefda6f534a --- /dev/null +++ b/arch/avr32/include/asm/types.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_TYPES_H +#define __ASM_AVR32_TYPES_H + +#include + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + + +#endif /* __ASM_AVR32_TYPES_H */ diff --git a/arch/avr32/include/asm/uaccess.h b/arch/avr32/include/asm/uaccess.h new file mode 100644 index 000000000000..ed092395215e --- /dev/null +++ b/arch/avr32/include/asm/uaccess.h @@ -0,0 +1,324 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_UACCESS_H +#define __ASM_AVR32_UACCESS_H + +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +typedef struct { + unsigned int is_user_space; +} mm_segment_t; + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons (Data Segment Register?), these macros are misnamed. + */ +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) +#define segment_eq(a,b) ((a).is_user_space == (b).is_user_space) + +#define USER_ADDR_LIMIT 0x80000000 + +#define KERNEL_DS MAKE_MM_SEG(0) +#define USER_DS MAKE_MM_SEG(1) + +#define get_ds() (KERNEL_DS) + +static inline mm_segment_t get_fs(void) +{ + return MAKE_MM_SEG(test_thread_flag(TIF_USERSPACE)); +} + +static inline void set_fs(mm_segment_t s) +{ + if (s.is_user_space) + set_thread_flag(TIF_USERSPACE); + else + clear_thread_flag(TIF_USERSPACE); +} + +/* + * Test whether a block of memory is a valid user space address. + * Returns 0 if the range is valid, nonzero otherwise. + * + * We do the following checks: + * 1. Is the access from kernel space? + * 2. Does (addr + size) set the carry bit? + * 3. Is (addr + size) a negative number (i.e. >= 0x80000000)? + * + * If yes on the first check, access is granted. + * If no on any of the others, access is denied. + */ +#define __range_ok(addr, size) \ + (test_thread_flag(TIF_USERSPACE) \ + && (((unsigned long)(addr) >= 0x80000000) \ + || ((unsigned long)(size) > 0x80000000) \ + || (((unsigned long)(addr) + (unsigned long)(size)) > 0x80000000))) + +#define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0)) + +/* Generic arbitrary sized copy. Return the number of bytes NOT copied */ +extern __kernel_size_t __copy_user(void *to, const void *from, + __kernel_size_t n); + +extern __kernel_size_t copy_to_user(void __user *to, const void *from, + __kernel_size_t n); +extern __kernel_size_t copy_from_user(void *to, const void __user *from, + __kernel_size_t n); + +static inline __kernel_size_t __copy_to_user(void __user *to, const void *from, + __kernel_size_t n) +{ + return __copy_user((void __force *)to, from, n); +} +static inline __kernel_size_t __copy_from_user(void *to, + const void __user *from, + __kernel_size_t n) +{ + return __copy_user(to, (const void __force *)from, n); +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +/* + * put_user: - Write a simple value into user space. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Returns zero on success, or -EFAULT on error. + */ +#define put_user(x,ptr) \ + __put_user_check((x),(ptr),sizeof(*(ptr))) + +/* + * get_user: - Get a simple variable from user space. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define get_user(x,ptr) \ + __get_user_check((x),(ptr),sizeof(*(ptr))) + +/* + * __put_user: - Write a simple value into user space, with less checking. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + */ +#define __put_user(x,ptr) \ + __put_user_nocheck((x),(ptr),sizeof(*(ptr))) + +/* + * __get_user: - Get a simple variable from user space, with less checking. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define __get_user(x,ptr) \ + __get_user_nocheck((x),(ptr),sizeof(*(ptr))) + +extern int __get_user_bad(void); +extern int __put_user_bad(void); + +#define __get_user_nocheck(x, ptr, size) \ +({ \ + unsigned long __gu_val = 0; \ + int __gu_err = 0; \ + \ + switch (size) { \ + case 1: __get_user_asm("ub", __gu_val, ptr, __gu_err); break; \ + case 2: __get_user_asm("uh", __gu_val, ptr, __gu_err); break; \ + case 4: __get_user_asm("w", __gu_val, ptr, __gu_err); break; \ + default: __gu_err = __get_user_bad(); break; \ + } \ + \ + x = (typeof(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_check(x, ptr, size) \ +({ \ + unsigned long __gu_val = 0; \ + const typeof(*(ptr)) __user * __gu_addr = (ptr); \ + int __gu_err = 0; \ + \ + if (access_ok(VERIFY_READ, __gu_addr, size)) { \ + switch (size) { \ + case 1: \ + __get_user_asm("ub", __gu_val, __gu_addr, \ + __gu_err); \ + break; \ + case 2: \ + __get_user_asm("uh", __gu_val, __gu_addr, \ + __gu_err); \ + break; \ + case 4: \ + __get_user_asm("w", __gu_val, __gu_addr, \ + __gu_err); \ + break; \ + default: \ + __gu_err = __get_user_bad(); \ + break; \ + } \ + } else { \ + __gu_err = -EFAULT; \ + } \ + x = (typeof(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_asm(suffix, __gu_val, ptr, __gu_err) \ + asm volatile( \ + "1: ld." suffix " %1, %3 \n" \ + "2: \n" \ + " .section .fixup, \"ax\" \n" \ + "3: mov %0, %4 \n" \ + " rjmp 2b \n" \ + " .previous \n" \ + " .section __ex_table, \"a\" \n" \ + " .long 1b, 3b \n" \ + " .previous \n" \ + : "=r"(__gu_err), "=r"(__gu_val) \ + : "0"(__gu_err), "m"(*(ptr)), "i"(-EFAULT)) + +#define __put_user_nocheck(x, ptr, size) \ +({ \ + typeof(*(ptr)) __pu_val; \ + int __pu_err = 0; \ + \ + __pu_val = (x); \ + switch (size) { \ + case 1: __put_user_asm("b", ptr, __pu_val, __pu_err); break; \ + case 2: __put_user_asm("h", ptr, __pu_val, __pu_err); break; \ + case 4: __put_user_asm("w", ptr, __pu_val, __pu_err); break; \ + case 8: __put_user_asm("d", ptr, __pu_val, __pu_err); break; \ + default: __pu_err = __put_user_bad(); break; \ + } \ + __pu_err; \ +}) + +#define __put_user_check(x, ptr, size) \ +({ \ + typeof(*(ptr)) __pu_val; \ + typeof(*(ptr)) __user *__pu_addr = (ptr); \ + int __pu_err = 0; \ + \ + __pu_val = (x); \ + if (access_ok(VERIFY_WRITE, __pu_addr, size)) { \ + switch (size) { \ + case 1: \ + __put_user_asm("b", __pu_addr, __pu_val, \ + __pu_err); \ + break; \ + case 2: \ + __put_user_asm("h", __pu_addr, __pu_val, \ + __pu_err); \ + break; \ + case 4: \ + __put_user_asm("w", __pu_addr, __pu_val, \ + __pu_err); \ + break; \ + case 8: \ + __put_user_asm("d", __pu_addr, __pu_val, \ + __pu_err); \ + break; \ + default: \ + __pu_err = __put_user_bad(); \ + break; \ + } \ + } else { \ + __pu_err = -EFAULT; \ + } \ + __pu_err; \ +}) + +#define __put_user_asm(suffix, ptr, __pu_val, __gu_err) \ + asm volatile( \ + "1: st." suffix " %1, %3 \n" \ + "2: \n" \ + " .section .fixup, \"ax\" \n" \ + "3: mov %0, %4 \n" \ + " rjmp 2b \n" \ + " .previous \n" \ + " .section __ex_table, \"a\" \n" \ + " .long 1b, 3b \n" \ + " .previous \n" \ + : "=r"(__gu_err), "=m"(*(ptr)) \ + : "0"(__gu_err), "r"(__pu_val), "i"(-EFAULT)) + +extern __kernel_size_t clear_user(void __user *addr, __kernel_size_t size); +extern __kernel_size_t __clear_user(void __user *addr, __kernel_size_t size); + +extern long strncpy_from_user(char *dst, const char __user *src, long count); +extern long __strncpy_from_user(char *dst, const char __user *src, long count); + +extern long strnlen_user(const char __user *__s, long __n); +extern long __strnlen_user(const char __user *__s, long __n); + +#define strlen_user(s) strnlen_user(s, ~0UL >> 1) + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +#endif /* __ASM_AVR32_UACCESS_H */ diff --git a/arch/avr32/include/asm/ucontext.h b/arch/avr32/include/asm/ucontext.h new file mode 100644 index 000000000000..ac7259c2a799 --- /dev/null +++ b/arch/avr32/include/asm/ucontext.h @@ -0,0 +1,12 @@ +#ifndef __ASM_AVR32_UCONTEXT_H +#define __ASM_AVR32_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext * uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; +}; + +#endif /* __ASM_AVR32_UCONTEXT_H */ diff --git a/arch/avr32/include/asm/unaligned.h b/arch/avr32/include/asm/unaligned.h new file mode 100644 index 000000000000..041877290470 --- /dev/null +++ b/arch/avr32/include/asm/unaligned.h @@ -0,0 +1,21 @@ +#ifndef _ASM_AVR32_UNALIGNED_H +#define _ASM_AVR32_UNALIGNED_H + +/* + * AVR32 can handle some unaligned accesses, depending on the + * implementation. The AVR32 AP implementation can handle unaligned + * words, but halfwords must be halfword-aligned, and doublewords must + * be word-aligned. + * + * However, swapped word loads must be word-aligned so we can't + * optimize word loads in general. + */ + +#include +#include +#include + +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#endif /* _ASM_AVR32_UNALIGNED_H */ diff --git a/arch/avr32/include/asm/unistd.h b/arch/avr32/include/asm/unistd.h new file mode 100644 index 000000000000..89861a27543e --- /dev/null +++ b/arch/avr32/include/asm/unistd.h @@ -0,0 +1,345 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_UNISTD_H +#define __ASM_AVR32_UNISTD_H + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_umask 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_chown 16 +#define __NR_lchown 17 +#define __NR_lseek 18 +#define __NR__llseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount2 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_pause 28 +#define __NR_utime 29 +#define __NR_stat 30 +#define __NR_fstat 31 +#define __NR_lstat 32 +#define __NR_access 33 +#define __NR_chroot 34 +#define __NR_sync 35 +#define __NR_fsync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_clone 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_getcwd 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_setfsuid 52 +#define __NR_setfsgid 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_setpgid 56 +#define __NR_mremap 57 +#define __NR_setresuid 58 +#define __NR_getresuid 59 +#define __NR_setreuid 60 +#define __NR_setregid 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_rt_sigaction 67 +#define __NR_rt_sigreturn 68 +#define __NR_rt_sigprocmask 69 +#define __NR_rt_sigpending 70 +#define __NR_rt_sigtimedwait 71 +#define __NR_rt_sigqueueinfo 72 +#define __NR_rt_sigsuspend 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* SuS compliant getrlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_fchdir 84 +#define __NR_readlink 85 +#define __NR_pread 86 +#define __NR_pwrite 87 +#define __NR_swapon 88 +#define __NR_reboot 89 +#define __NR_mmap2 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_wait4 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_vhangup 101 +#define __NR_sigaltstack 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_swapoff 106 +#define __NR_sysinfo 107 +/* 108 was __NR_ipc for a little while */ +#define __NR_sendfile 109 +#define __NR_setdomainname 110 +#define __NR_uname 111 +#define __NR_adjtimex 112 +#define __NR_mprotect 113 +#define __NR_vfork 114 +#define __NR_init_module 115 +#define __NR_delete_module 116 +#define __NR_quotactl 117 +#define __NR_getpgid 118 +#define __NR_bdflush 119 +#define __NR_sysfs 120 +#define __NR_personality 121 +#define __NR_afs_syscall 122 /* Syscall for Andrew File System */ +#define __NR_getdents 123 +#define __NR_flock 124 +#define __NR_msync 125 +#define __NR_readv 126 +#define __NR_writev 127 +#define __NR_getsid 128 +#define __NR_fdatasync 129 +#define __NR__sysctl 130 +#define __NR_mlock 131 +#define __NR_munlock 132 +#define __NR_mlockall 133 +#define __NR_munlockall 134 +#define __NR_sched_setparam 135 +#define __NR_sched_getparam 136 +#define __NR_sched_setscheduler 137 +#define __NR_sched_getscheduler 138 +#define __NR_sched_yield 139 +#define __NR_sched_get_priority_max 140 +#define __NR_sched_get_priority_min 141 +#define __NR_sched_rr_get_interval 142 +#define __NR_nanosleep 143 +#define __NR_poll 144 +#define __NR_nfsservctl 145 +#define __NR_setresgid 146 +#define __NR_getresgid 147 +#define __NR_prctl 148 +#define __NR_socket 149 +#define __NR_bind 150 +#define __NR_connect 151 +#define __NR_listen 152 +#define __NR_accept 153 +#define __NR_getsockname 154 +#define __NR_getpeername 155 +#define __NR_socketpair 156 +#define __NR_send 157 +#define __NR_recv 158 +#define __NR_sendto 159 +#define __NR_recvfrom 160 +#define __NR_shutdown 161 +#define __NR_setsockopt 162 +#define __NR_getsockopt 163 +#define __NR_sendmsg 164 +#define __NR_recvmsg 165 +#define __NR_truncate64 166 +#define __NR_ftruncate64 167 +#define __NR_stat64 168 +#define __NR_lstat64 169 +#define __NR_fstat64 170 +#define __NR_pivot_root 171 +#define __NR_mincore 172 +#define __NR_madvise 173 +#define __NR_getdents64 174 +#define __NR_fcntl64 175 +#define __NR_gettid 176 +#define __NR_readahead 177 +#define __NR_setxattr 178 +#define __NR_lsetxattr 179 +#define __NR_fsetxattr 180 +#define __NR_getxattr 181 +#define __NR_lgetxattr 182 +#define __NR_fgetxattr 183 +#define __NR_listxattr 184 +#define __NR_llistxattr 185 +#define __NR_flistxattr 186 +#define __NR_removexattr 187 +#define __NR_lremovexattr 188 +#define __NR_fremovexattr 189 +#define __NR_tkill 190 +#define __NR_sendfile64 191 +#define __NR_futex 192 +#define __NR_sched_setaffinity 193 +#define __NR_sched_getaffinity 194 +#define __NR_capget 195 +#define __NR_capset 196 +#define __NR_io_setup 197 +#define __NR_io_destroy 198 +#define __NR_io_getevents 199 +#define __NR_io_submit 200 +#define __NR_io_cancel 201 +#define __NR_fadvise64 202 +#define __NR_exit_group 203 +#define __NR_lookup_dcookie 204 +#define __NR_epoll_create 205 +#define __NR_epoll_ctl 206 +#define __NR_epoll_wait 207 +#define __NR_remap_file_pages 208 +#define __NR_set_tid_address 209 + +#define __NR_timer_create 210 +#define __NR_timer_settime 211 +#define __NR_timer_gettime 212 +#define __NR_timer_getoverrun 213 +#define __NR_timer_delete 214 +#define __NR_clock_settime 215 +#define __NR_clock_gettime 216 +#define __NR_clock_getres 217 +#define __NR_clock_nanosleep 218 +#define __NR_statfs64 219 +#define __NR_fstatfs64 220 +#define __NR_tgkill 221 + /* 222 reserved for tux */ +#define __NR_utimes 223 +#define __NR_fadvise64_64 224 + +#define __NR_cacheflush 225 + +#define __NR_vserver 226 +#define __NR_mq_open 227 +#define __NR_mq_unlink 228 +#define __NR_mq_timedsend 229 +#define __NR_mq_timedreceive 230 +#define __NR_mq_notify 231 +#define __NR_mq_getsetattr 232 +#define __NR_kexec_load 233 +#define __NR_waitid 234 +#define __NR_add_key 235 +#define __NR_request_key 236 +#define __NR_keyctl 237 +#define __NR_ioprio_set 238 +#define __NR_ioprio_get 239 +#define __NR_inotify_init 240 +#define __NR_inotify_add_watch 241 +#define __NR_inotify_rm_watch 242 +#define __NR_openat 243 +#define __NR_mkdirat 244 +#define __NR_mknodat 245 +#define __NR_fchownat 246 +#define __NR_futimesat 247 +#define __NR_fstatat64 248 +#define __NR_unlinkat 249 +#define __NR_renameat 250 +#define __NR_linkat 251 +#define __NR_symlinkat 252 +#define __NR_readlinkat 253 +#define __NR_fchmodat 254 +#define __NR_faccessat 255 +#define __NR_pselect6 256 +#define __NR_ppoll 257 +#define __NR_unshare 258 +#define __NR_set_robust_list 259 +#define __NR_get_robust_list 260 +#define __NR_splice 261 +#define __NR_sync_file_range 262 +#define __NR_tee 263 +#define __NR_vmsplice 264 +#define __NR_epoll_pwait 265 + +#define __NR_msgget 266 +#define __NR_msgsnd 267 +#define __NR_msgrcv 268 +#define __NR_msgctl 269 +#define __NR_semget 270 +#define __NR_semop 271 +#define __NR_semctl 272 +#define __NR_semtimedop 273 +#define __NR_shmat 274 +#define __NR_shmget 275 +#define __NR_shmdt 276 +#define __NR_shmctl 277 + +#define __NR_utimensat 278 +#define __NR_signalfd 279 +/* 280 was __NR_timerfd */ +#define __NR_eventfd 281 + +#ifdef __KERNEL__ +#define NR_syscalls 282 + +/* Old stuff */ +#define __IGNORE_uselib +#define __IGNORE_mmap + +/* NUMA stuff */ +#define __IGNORE_mbind +#define __IGNORE_get_mempolicy +#define __IGNORE_set_mempolicy +#define __IGNORE_migrate_pages +#define __IGNORE_move_pages + +/* SMP stuff */ +#define __IGNORE_getcpu + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall"); + +#endif /* __KERNEL__ */ + +#endif /* __ASM_AVR32_UNISTD_H */ diff --git a/arch/avr32/include/asm/user.h b/arch/avr32/include/asm/user.h new file mode 100644 index 000000000000..7e9152f81f5e --- /dev/null +++ b/arch/avr32/include/asm/user.h @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Note: We may not need these definitions for AVR32, as we don't + * support a.out. + */ +#ifndef __ASM_AVR32_USER_H +#define __ASM_AVR32_USER_H + +#include +#include +#include + +/* + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd). The file contents are as follows: + * + * upage: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page long. + * data: The data segment follows next. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * stack: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these in order to be able + * to write an integer number of pages. + */ + +struct user_fpu_struct { + /* We have no FPU (yet) */ +}; + +struct user { + struct pt_regs regs; /* entire machine state */ + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + unsigned long u_ar0; /* help gdb find registers */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* __ASM_AVR32_USER_H */ diff --git a/arch/avr32/include/asm/xor.h b/arch/avr32/include/asm/xor.h new file mode 100644 index 000000000000..99c87aa0af4f --- /dev/null +++ b/arch/avr32/include/asm/xor.h @@ -0,0 +1,6 @@ +#ifndef _ASM_XOR_H +#define _ASM_XOR_H + +#include + +#endif diff --git a/include/asm-avr32/Kbuild b/include/asm-avr32/Kbuild deleted file mode 100644 index 3136628ba8d2..000000000000 --- a/include/asm-avr32/Kbuild +++ /dev/null @@ -1,3 +0,0 @@ -include include/asm-generic/Kbuild.asm - -header-y += cachectl.h diff --git a/include/asm-avr32/a.out.h b/include/asm-avr32/a.out.h deleted file mode 100644 index e46375a34a72..000000000000 --- a/include/asm-avr32/a.out.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_AVR32_A_OUT_H -#define __ASM_AVR32_A_OUT_H - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#endif /* __ASM_AVR32_A_OUT_H */ diff --git a/include/asm-avr32/addrspace.h b/include/asm-avr32/addrspace.h deleted file mode 100644 index 366794858ec7..000000000000 --- a/include/asm-avr32/addrspace.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Defitions for the address spaces of the AVR32 CPUs. Heavily based on - * include/asm-sh/addrspace.h - * - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_ADDRSPACE_H -#define __ASM_AVR32_ADDRSPACE_H - -#ifdef CONFIG_MMU - -/* Memory segments when segmentation is enabled */ -#define P0SEG 0x00000000 -#define P1SEG 0x80000000 -#define P2SEG 0xa0000000 -#define P3SEG 0xc0000000 -#define P4SEG 0xe0000000 - -/* Returns the privileged segment base of a given address */ -#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000) - -/* Returns the physical address of a PnSEG (n=1,2) address */ -#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) - -/* - * Map an address to a certain privileged segment - */ -#define P1SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \ - | P1SEG)) -#define P2SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \ - | P2SEG)) -#define P3SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \ - | P3SEG)) -#define P4SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \ - | P4SEG)) - -#endif /* CONFIG_MMU */ - -#endif /* __ASM_AVR32_ADDRSPACE_H */ diff --git a/include/asm-avr32/asm.h b/include/asm-avr32/asm.h deleted file mode 100644 index a2c64f404b98..000000000000 --- a/include/asm-avr32/asm.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_ASM_H__ -#define __ASM_AVR32_ASM_H__ - -#include -#include -#include - -#define mask_interrupts ssrf SYSREG_GM_OFFSET -#define mask_exceptions ssrf SYSREG_EM_OFFSET -#define unmask_interrupts csrf SYSREG_GM_OFFSET -#define unmask_exceptions csrf SYSREG_EM_OFFSET - -#ifdef CONFIG_FRAME_POINTER - .macro save_fp - st.w --sp, r7 - .endm - .macro restore_fp - ld.w r7, sp++ - .endm - .macro zero_fp - mov r7, 0 - .endm -#else - .macro save_fp - .endm - .macro restore_fp - .endm - .macro zero_fp - .endm -#endif - .macro get_thread_info reg - mov \reg, sp - andl \reg, ~(THREAD_SIZE - 1) & 0xffff - .endm - - /* Save and restore registers */ - .macro save_min sr, tmp=lr - pushm lr - mfsr \tmp, \sr - zero_fp - st.w --sp, \tmp - .endm - - .macro restore_min sr, tmp=lr - ld.w \tmp, sp++ - mtsr \sr, \tmp - popm lr - .endm - - .macro save_half sr, tmp=lr - save_fp - pushm r8-r9,r10,r11,r12,lr - zero_fp - mfsr \tmp, \sr - st.w --sp, \tmp - .endm - - .macro restore_half sr, tmp=lr - ld.w \tmp, sp++ - mtsr \sr, \tmp - popm r8-r9,r10,r11,r12,lr - restore_fp - .endm - - .macro save_full_user sr, tmp=lr - stmts --sp, r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,sp,lr - st.w --sp, lr - zero_fp - mfsr \tmp, \sr - st.w --sp, \tmp - .endm - - .macro restore_full_user sr, tmp=lr - ld.w \tmp, sp++ - mtsr \sr, \tmp - ld.w lr, sp++ - ldmts sp++, r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,sp,lr - .endm - - /* uaccess macros */ - .macro branch_if_kernel scratch, label - get_thread_info \scratch - ld.w \scratch, \scratch[TI_flags] - bld \scratch, TIF_USERSPACE - brcc \label - .endm - - .macro ret_if_privileged scratch, addr, size, ret - sub \scratch, \size, 1 - add \scratch, \addr - retcs \ret - retmi \ret - .endm - -#endif /* __ASM_AVR32_ASM_H__ */ diff --git a/include/asm-avr32/atmel-mci.h b/include/asm-avr32/atmel-mci.h deleted file mode 100644 index c2ea6e1c9aa1..000000000000 --- a/include/asm-avr32/atmel-mci.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_AVR32_ATMEL_MCI_H -#define __ASM_AVR32_ATMEL_MCI_H - -struct mci_platform_data { - int detect_pin; - int wp_pin; -}; - -#endif /* __ASM_AVR32_ATMEL_MCI_H */ diff --git a/include/asm-avr32/atomic.h b/include/asm-avr32/atomic.h deleted file mode 100644 index 7ef3862a73d0..000000000000 --- a/include/asm-avr32/atomic.h +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc. - * - * But use these as seldom as possible since they are slower than - * regular operations. - * - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_ATOMIC_H -#define __ASM_AVR32_ATOMIC_H - -#include - -typedef struct { volatile int counter; } atomic_t; -#define ATOMIC_INIT(i) { (i) } - -#define atomic_read(v) ((v)->counter) -#define atomic_set(v, i) (((v)->counter) = i) - -/* - * atomic_sub_return - subtract the atomic variable - * @i: integer value to subtract - * @v: pointer of type atomic_t - * - * Atomically subtracts @i from @v. Returns the resulting value. - */ -static inline int atomic_sub_return(int i, atomic_t *v) -{ - int result; - - asm volatile( - "/* atomic_sub_return */\n" - "1: ssrf 5\n" - " ld.w %0, %2\n" - " sub %0, %3\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(result), "=o"(v->counter) - : "m"(v->counter), "rKs21"(i) - : "cc"); - - return result; -} - -/* - * atomic_add_return - add integer to atomic variable - * @i: integer value to add - * @v: pointer of type atomic_t - * - * Atomically adds @i to @v. Returns the resulting value. - */ -static inline int atomic_add_return(int i, atomic_t *v) -{ - int result; - - if (__builtin_constant_p(i) && (i >= -1048575) && (i <= 1048576)) - result = atomic_sub_return(-i, v); - else - asm volatile( - "/* atomic_add_return */\n" - "1: ssrf 5\n" - " ld.w %0, %1\n" - " add %0, %3\n" - " stcond %2, %0\n" - " brne 1b" - : "=&r"(result), "=o"(v->counter) - : "m"(v->counter), "r"(i) - : "cc", "memory"); - - return result; -} - -/* - * atomic_sub_unless - sub unless the number is a given value - * @v: pointer of type atomic_t - * @a: the amount to add to v... - * @u: ...unless v is equal to u. - * - * If the atomic value v is not equal to u, this function subtracts a - * from v, and returns non zero. If v is equal to u then it returns - * zero. This is done as an atomic operation. -*/ -static inline int atomic_sub_unless(atomic_t *v, int a, int u) -{ - int tmp, result = 0; - - asm volatile( - "/* atomic_sub_unless */\n" - "1: ssrf 5\n" - " ld.w %0, %3\n" - " cp.w %0, %5\n" - " breq 1f\n" - " sub %0, %4\n" - " stcond %2, %0\n" - " brne 1b\n" - " mov %1, 1\n" - "1:" - : "=&r"(tmp), "=&r"(result), "=o"(v->counter) - : "m"(v->counter), "rKs21"(a), "rKs21"(u), "1"(result) - : "cc", "memory"); - - return result; -} - -/* - * atomic_add_unless - add unless the number is a given value - * @v: pointer of type atomic_t - * @a: the amount to add to v... - * @u: ...unless v is equal to u. - * - * If the atomic value v is not equal to u, this function adds a to v, - * and returns non zero. If v is equal to u then it returns zero. This - * is done as an atomic operation. -*/ -static inline int atomic_add_unless(atomic_t *v, int a, int u) -{ - int tmp, result; - - if (__builtin_constant_p(a) && (a >= -1048575) && (a <= 1048576)) - result = atomic_sub_unless(v, -a, u); - else { - result = 0; - asm volatile( - "/* atomic_add_unless */\n" - "1: ssrf 5\n" - " ld.w %0, %3\n" - " cp.w %0, %5\n" - " breq 1f\n" - " add %0, %4\n" - " stcond %2, %0\n" - " brne 1b\n" - " mov %1, 1\n" - "1:" - : "=&r"(tmp), "=&r"(result), "=o"(v->counter) - : "m"(v->counter), "r"(a), "ir"(u), "1"(result) - : "cc", "memory"); - } - - return result; -} - -/* - * atomic_sub_if_positive - conditionally subtract integer from atomic variable - * @i: integer value to subtract - * @v: pointer of type atomic_t - * - * Atomically test @v and subtract @i if @v is greater or equal than @i. - * The function returns the old value of @v minus @i. - */ -static inline int atomic_sub_if_positive(int i, atomic_t *v) -{ - int result; - - asm volatile( - "/* atomic_sub_if_positive */\n" - "1: ssrf 5\n" - " ld.w %0, %2\n" - " sub %0, %3\n" - " brlt 1f\n" - " stcond %1, %0\n" - " brne 1b\n" - "1:" - : "=&r"(result), "=o"(v->counter) - : "m"(v->counter), "ir"(i) - : "cc", "memory"); - - return result; -} - -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) -#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) - -#define atomic_sub(i, v) (void)atomic_sub_return(i, v) -#define atomic_add(i, v) (void)atomic_add_return(i, v) -#define atomic_dec(v) atomic_sub(1, (v)) -#define atomic_inc(v) atomic_add(1, (v)) - -#define atomic_dec_return(v) atomic_sub_return(1, v) -#define atomic_inc_return(v) atomic_add_return(1, v) - -#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0) -#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0) -#define atomic_add_negative(i, v) (atomic_add_return(i, v) < 0) - -#define atomic_inc_not_zero(v) atomic_add_unless(v, 1, 0) -#define atomic_dec_if_positive(v) atomic_sub_if_positive(1, v) - -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include - -#endif /* __ASM_AVR32_ATOMIC_H */ diff --git a/include/asm-avr32/auxvec.h b/include/asm-avr32/auxvec.h deleted file mode 100644 index d5dd435bf8f4..000000000000 --- a/include/asm-avr32/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASM_AVR32_AUXVEC_H -#define __ASM_AVR32_AUXVEC_H - -#endif /* __ASM_AVR32_AUXVEC_H */ diff --git a/include/asm-avr32/bitops.h b/include/asm-avr32/bitops.h deleted file mode 100644 index 1a50b69b1a19..000000000000 --- a/include/asm-avr32/bitops.h +++ /dev/null @@ -1,301 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_BITOPS_H -#define __ASM_AVR32_BITOPS_H - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include -#include - -/* - * clear_bit() doesn't provide any barrier for the compiler - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -/* - * set_bit - Atomically set a bit in memory - * @nr: the bit to set - * @addr: the address to start counting from - * - * This function is atomic and may not be reordered. See __set_bit() - * if you do not require the atomic guarantees. - * - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ -static inline void set_bit(int nr, volatile void * addr) -{ - unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; - unsigned long tmp; - - if (__builtin_constant_p(nr)) { - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %2\n" - " sbr %0, %3\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p) - : "m"(*p), "i"(nr) - : "cc"); - } else { - unsigned long mask = 1UL << (nr % BITS_PER_LONG); - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %2\n" - " or %0, %3\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p) - : "m"(*p), "r"(mask) - : "cc"); - } -} - -/* - * clear_bit - Clears a bit in memory - * @nr: Bit to clear - * @addr: Address to start counting from - * - * clear_bit() is atomic and may not be reordered. However, it does - * not contain a memory barrier, so if it is used for locking purposes, - * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() - * in order to ensure changes are visible on other processors. - */ -static inline void clear_bit(int nr, volatile void * addr) -{ - unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; - unsigned long tmp; - - if (__builtin_constant_p(nr)) { - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %2\n" - " cbr %0, %3\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p) - : "m"(*p), "i"(nr) - : "cc"); - } else { - unsigned long mask = 1UL << (nr % BITS_PER_LONG); - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %2\n" - " andn %0, %3\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p) - : "m"(*p), "r"(mask) - : "cc"); - } -} - -/* - * change_bit - Toggle a bit in memory - * @nr: Bit to change - * @addr: Address to start counting from - * - * change_bit() is atomic and may not be reordered. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ -static inline void change_bit(int nr, volatile void * addr) -{ - unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; - unsigned long mask = 1UL << (nr % BITS_PER_LONG); - unsigned long tmp; - - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %2\n" - " eor %0, %3\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p) - : "m"(*p), "r"(mask) - : "cc"); -} - -/* - * test_and_set_bit - Set a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static inline int test_and_set_bit(int nr, volatile void * addr) -{ - unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; - unsigned long mask = 1UL << (nr % BITS_PER_LONG); - unsigned long tmp, old; - - if (__builtin_constant_p(nr)) { - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %3\n" - " mov %2, %0\n" - " sbr %0, %4\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p), "=&r"(old) - : "m"(*p), "i"(nr) - : "memory", "cc"); - } else { - asm volatile( - "1: ssrf 5\n" - " ld.w %2, %3\n" - " or %0, %2, %4\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p), "=&r"(old) - : "m"(*p), "r"(mask) - : "memory", "cc"); - } - - return (old & mask) != 0; -} - -/* - * test_and_clear_bit - Clear a bit and return its old value - * @nr: Bit to clear - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static inline int test_and_clear_bit(int nr, volatile void * addr) -{ - unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; - unsigned long mask = 1UL << (nr % BITS_PER_LONG); - unsigned long tmp, old; - - if (__builtin_constant_p(nr)) { - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %3\n" - " mov %2, %0\n" - " cbr %0, %4\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p), "=&r"(old) - : "m"(*p), "i"(nr) - : "memory", "cc"); - } else { - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %3\n" - " mov %2, %0\n" - " andn %0, %4\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p), "=&r"(old) - : "m"(*p), "r"(mask) - : "memory", "cc"); - } - - return (old & mask) != 0; -} - -/* - * test_and_change_bit - Change a bit and return its old value - * @nr: Bit to change - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static inline int test_and_change_bit(int nr, volatile void * addr) -{ - unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; - unsigned long mask = 1UL << (nr % BITS_PER_LONG); - unsigned long tmp, old; - - asm volatile( - "1: ssrf 5\n" - " ld.w %2, %3\n" - " eor %0, %2, %4\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p), "=&r"(old) - : "m"(*p), "r"(mask) - : "memory", "cc"); - - return (old & mask) != 0; -} - -#include - -/* Find First bit Set */ -static inline unsigned long __ffs(unsigned long word) -{ - unsigned long result; - - asm("brev %1\n\t" - "clz %0,%1" - : "=r"(result), "=&r"(word) - : "1"(word)); - return result; -} - -/* Find First Zero */ -static inline unsigned long ffz(unsigned long word) -{ - return __ffs(~word); -} - -/* Find Last bit Set */ -static inline int fls(unsigned long word) -{ - unsigned long result; - - asm("clz %0,%1" : "=r"(result) : "r"(word)); - return 32 - result; -} - -unsigned long find_first_zero_bit(const unsigned long *addr, - unsigned long size); -unsigned long find_next_zero_bit(const unsigned long *addr, - unsigned long size, - unsigned long offset); -unsigned long find_first_bit(const unsigned long *addr, - unsigned long size); -unsigned long find_next_bit(const unsigned long *addr, - unsigned long size, - unsigned long offset); - -/* - * ffs: find first bit set. This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - * - * The difference is that bit numbering starts at 1, and if no bit is set, - * the function returns 0. - */ -static inline int ffs(unsigned long word) -{ - if(word == 0) - return 0; - return __ffs(word) + 1; -} - -#include -#include -#include -#include - -#include -#include -#include - -#endif /* __ASM_AVR32_BITOPS_H */ diff --git a/include/asm-avr32/bug.h b/include/asm-avr32/bug.h deleted file mode 100644 index 331d45bab18f..000000000000 --- a/include/asm-avr32/bug.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Copyright (C) 2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_BUG_H -#define __ASM_AVR32_BUG_H - -#ifdef CONFIG_BUG - -/* - * According to our Chief Architect, this compact opcode is very - * unlikely to ever be implemented. - */ -#define AVR32_BUG_OPCODE 0x5df0 - -#ifdef CONFIG_DEBUG_BUGVERBOSE - -#define _BUG_OR_WARN(flags) \ - asm volatile( \ - "1: .hword %0\n" \ - " .section __bug_table,\"a\",@progbits\n" \ - "2: .long 1b\n" \ - " .long %1\n" \ - " .short %2\n" \ - " .short %3\n" \ - " .org 2b + %4\n" \ - " .previous" \ - : \ - : "i"(AVR32_BUG_OPCODE), "i"(__FILE__), \ - "i"(__LINE__), "i"(flags), \ - "i"(sizeof(struct bug_entry))) - -#else - -#define _BUG_OR_WARN(flags) \ - asm volatile( \ - "1: .hword %0\n" \ - " .section __bug_table,\"a\",@progbits\n" \ - "2: .long 1b\n" \ - " .short %1\n" \ - " .org 2b + %2\n" \ - " .previous" \ - : \ - : "i"(AVR32_BUG_OPCODE), "i"(flags), \ - "i"(sizeof(struct bug_entry))) - -#endif /* CONFIG_DEBUG_BUGVERBOSE */ - -#define BUG() \ - do { \ - _BUG_OR_WARN(0); \ - for (;;); \ - } while (0) - -#define WARN_ON(condition) \ - ({ \ - int __ret_warn_on = !!(condition); \ - if (unlikely(__ret_warn_on)) \ - _BUG_OR_WARN(BUGFLAG_WARNING); \ - unlikely(__ret_warn_on); \ - }) - -#define HAVE_ARCH_BUG -#define HAVE_ARCH_WARN_ON - -#endif /* CONFIG_BUG */ - -#include - -#endif /* __ASM_AVR32_BUG_H */ diff --git a/include/asm-avr32/bugs.h b/include/asm-avr32/bugs.h deleted file mode 100644 index 7635e770622e..000000000000 --- a/include/asm-avr32/bugs.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - */ -#ifndef __ASM_AVR32_BUGS_H -#define __ASM_AVR32_BUGS_H - -static void __init check_bugs(void) -{ - cpu_data->loops_per_jiffy = loops_per_jiffy; -} - -#endif /* __ASM_AVR32_BUGS_H */ diff --git a/include/asm-avr32/byteorder.h b/include/asm-avr32/byteorder.h deleted file mode 100644 index d77b48ba7338..000000000000 --- a/include/asm-avr32/byteorder.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * AVR32 endian-conversion functions. - */ -#ifndef __ASM_AVR32_BYTEORDER_H -#define __ASM_AVR32_BYTEORDER_H - -#include -#include - -#ifdef __CHECKER__ -extern unsigned long __builtin_bswap_32(unsigned long x); -extern unsigned short __builtin_bswap_16(unsigned short x); -#endif - -/* - * avr32-linux-gcc versions earlier than 4.2 improperly sign-extends - * the result. - */ -#if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2) -#define __arch__swab32(x) __builtin_bswap_32(x) -#define __arch__swab16(x) __builtin_bswap_16(x) -#endif - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#include - -#endif /* __ASM_AVR32_BYTEORDER_H */ diff --git a/include/asm-avr32/cache.h b/include/asm-avr32/cache.h deleted file mode 100644 index d3cf35ab11ab..000000000000 --- a/include/asm-avr32/cache.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef __ASM_AVR32_CACHE_H -#define __ASM_AVR32_CACHE_H - -#define L1_CACHE_SHIFT 5 -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -/* - * Memory returned by kmalloc() may be used for DMA, so we must make - * sure that all such allocations are cache aligned. Otherwise, - * unrelated code may cause parts of the buffer to be read into the - * cache before the transfer is done, causing old data to be seen by - * the CPU. - */ -#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES - -#ifndef __ASSEMBLER__ -struct cache_info { - unsigned int ways; - unsigned int sets; - unsigned int linesz; -}; -#endif /* __ASSEMBLER */ - -/* Cache operation constants */ -#define ICACHE_FLUSH 0x00 -#define ICACHE_INVALIDATE 0x01 -#define ICACHE_LOCK 0x02 -#define ICACHE_UNLOCK 0x03 -#define ICACHE_PREFETCH 0x04 - -#define DCACHE_FLUSH 0x08 -#define DCACHE_LOCK 0x09 -#define DCACHE_UNLOCK 0x0a -#define DCACHE_INVALIDATE 0x0b -#define DCACHE_CLEAN 0x0c -#define DCACHE_CLEAN_INVAL 0x0d - -#endif /* __ASM_AVR32_CACHE_H */ diff --git a/include/asm-avr32/cachectl.h b/include/asm-avr32/cachectl.h deleted file mode 100644 index 4faf1ce60061..000000000000 --- a/include/asm-avr32/cachectl.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_AVR32_CACHECTL_H -#define __ASM_AVR32_CACHECTL_H - -/* - * Operations that can be performed through the cacheflush system call - */ - -/* Clean the data cache, then invalidate the icache */ -#define CACHE_IFLUSH 0 - -#endif /* __ASM_AVR32_CACHECTL_H */ diff --git a/include/asm-avr32/cacheflush.h b/include/asm-avr32/cacheflush.h deleted file mode 100644 index 670674749b20..000000000000 --- a/include/asm-avr32/cacheflush.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_CACHEFLUSH_H -#define __ASM_AVR32_CACHEFLUSH_H - -/* Keep includes the same across arches. */ -#include - -#define CACHE_OP_ICACHE_INVALIDATE 0x01 -#define CACHE_OP_DCACHE_INVALIDATE 0x0b -#define CACHE_OP_DCACHE_CLEAN 0x0c -#define CACHE_OP_DCACHE_CLEAN_INVAL 0x0d - -/* - * Invalidate any cacheline containing virtual address vaddr without - * writing anything back to memory. - * - * Note that this function may corrupt unrelated data structures when - * applied on buffers that are not cacheline aligned in both ends. - */ -static inline void invalidate_dcache_line(void *vaddr) -{ - asm volatile("cache %0[0], %1" - : - : "r"(vaddr), "n"(CACHE_OP_DCACHE_INVALIDATE) - : "memory"); -} - -/* - * Make sure any cacheline containing virtual address vaddr is written - * to memory. - */ -static inline void clean_dcache_line(void *vaddr) -{ - asm volatile("cache %0[0], %1" - : - : "r"(vaddr), "n"(CACHE_OP_DCACHE_CLEAN) - : "memory"); -} - -/* - * Make sure any cacheline containing virtual address vaddr is written - * to memory and then invalidate it. - */ -static inline void flush_dcache_line(void *vaddr) -{ - asm volatile("cache %0[0], %1" - : - : "r"(vaddr), "n"(CACHE_OP_DCACHE_CLEAN_INVAL) - : "memory"); -} - -/* - * Invalidate any instruction cacheline containing virtual address - * vaddr. - */ -static inline void invalidate_icache_line(void *vaddr) -{ - asm volatile("cache %0[0], %1" - : - : "r"(vaddr), "n"(CACHE_OP_ICACHE_INVALIDATE) - : "memory"); -} - -/* - * Applies the above functions on all lines that are touched by the - * specified virtual address range. - */ -void invalidate_dcache_region(void *start, size_t len); -void clean_dcache_region(void *start, size_t len); -void flush_dcache_region(void *start, size_t len); -void invalidate_icache_region(void *start, size_t len); - -/* - * Make sure any pending writes are completed before continuing. - */ -#define flush_write_buffer() asm volatile("sync 0" : : : "memory") - -/* - * The following functions are called when a virtual mapping changes. - * We do not need to flush anything in this case. - */ -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -/* - * I think we need to implement this one to be able to reliably - * execute pages from RAMDISK. However, if we implement the - * flush_dcache_*() functions, it might not be needed anymore. - * - * #define flush_icache_page(vma, page) do { } while (0) - */ -extern void flush_icache_page(struct vm_area_struct *vma, struct page *page); - -/* - * These are (I think) related to D-cache aliasing. We might need to - * do something here, but only for certain configurations. No such - * configurations exist at this time. - */ -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(page) do { } while (0) -#define flush_dcache_mmap_unlock(page) do { } while (0) - -/* - * These are for I/D cache coherency. In this case, we do need to - * flush with all configurations. - */ -extern void flush_icache_range(unsigned long start, unsigned long end); - -extern void copy_to_user_page(struct vm_area_struct *vma, struct page *page, - unsigned long vaddr, void *dst, const void *src, - unsigned long len); - -static inline void copy_from_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, void *dst, - const void *src, unsigned long len) -{ - memcpy(dst, src, len); -} - -#endif /* __ASM_AVR32_CACHEFLUSH_H */ diff --git a/include/asm-avr32/checksum.h b/include/asm-avr32/checksum.h deleted file mode 100644 index 4ddbfd2486af..000000000000 --- a/include/asm-avr32/checksum.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_CHECKSUM_H -#define __ASM_AVR32_CHECKSUM_H - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums, and handles user-space pointer exceptions correctly, when needed. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ -__wsum csum_partial_copy_generic(const void *src, void *dst, int len, - __wsum sum, int *src_err_ptr, - int *dst_err_ptr); - -/* - * Note: when you get a NULL pointer exception here this means someone - * passed in an incorrect kernel address to one of these functions. - * - * If you use these functions directly please don't forget the - * access_ok(). - */ -static inline -__wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum) -{ - return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL); -} - -static inline -__wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *err_ptr) -{ - return csum_partial_copy_generic((const void __force *)src, dst, len, - sum, err_ptr, NULL); -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - */ -static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - unsigned int sum, tmp; - - __asm__ __volatile__( - " ld.w %0, %1++\n" - " ld.w %3, %1++\n" - " sub %2, 4\n" - " add %0, %3\n" - " ld.w %3, %1++\n" - " adc %0, %0, %3\n" - " ld.w %3, %1++\n" - " adc %0, %0, %3\n" - " acr %0\n" - "1: ld.w %3, %1++\n" - " add %0, %3\n" - " acr %0\n" - " sub %2, 1\n" - " brne 1b\n" - " lsl %3, %0, 16\n" - " andl %0, 0\n" - " mov %2, 0xffff\n" - " add %0, %3\n" - " adc %0, %0, %2\n" - " com %0\n" - " lsr %0, 16\n" - : "=r"(sum), "=r"(iph), "=r"(ihl), "=r"(tmp) - : "1"(iph), "2"(ihl) - : "memory", "cc"); - return (__force __sum16)sum; -} - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp; - - asm(" bfextu %1, %0, 0, 16\n" - " lsr %0, 16\n" - " add %0, %1\n" - " bfextu %1, %0, 16, 16\n" - " add %0, %1" - : "=&r"(sum), "=&r"(tmp) - : "0"(sum)); - - return (__force __sum16)~sum; -} - -static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - asm(" add %0, %1\n" - " adc %0, %0, %2\n" - " adc %0, %0, %3\n" - " acr %0" - : "=r"(sum) - : "r"(daddr), "r"(saddr), "r"(len + proto), - "0"(sum) - : "cc"); - - return sum; -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -#endif /* __ASM_AVR32_CHECKSUM_H */ diff --git a/include/asm-avr32/cputime.h b/include/asm-avr32/cputime.h deleted file mode 100644 index e87e0f81cbeb..000000000000 --- a/include/asm-avr32/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_CPUTIME_H -#define __ASM_AVR32_CPUTIME_H - -#include - -#endif /* __ASM_AVR32_CPUTIME_H */ diff --git a/include/asm-avr32/current.h b/include/asm-avr32/current.h deleted file mode 100644 index c7b0549eab8a..000000000000 --- a/include/asm-avr32/current.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef __ASM_AVR32_CURRENT_H -#define __ASM_AVR32_CURRENT_H - -#include - -struct task_struct; - -inline static struct task_struct * get_current(void) -{ - return current_thread_info()->task; -} - -#define current get_current() - -#endif /* __ASM_AVR32_CURRENT_H */ diff --git a/include/asm-avr32/delay.h b/include/asm-avr32/delay.h deleted file mode 100644 index a0ed9a9839a5..000000000000 --- a/include/asm-avr32/delay.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef __ASM_AVR32_DELAY_H -#define __ASM_AVR32_DELAY_H - -/* - * Copyright (C) 1993 Linus Torvalds - * - * Delay routines calling functions in arch/avr32/lib/delay.c - */ - -extern void __bad_udelay(void); -extern void __bad_ndelay(void); - -extern void __udelay(unsigned long usecs); -extern void __ndelay(unsigned long nsecs); -extern void __const_udelay(unsigned long xloops); -extern void __delay(unsigned long loops); - -#define udelay(n) (__builtin_constant_p(n) ? \ - ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \ - __udelay(n)) - -#define ndelay(n) (__builtin_constant_p(n) ? \ - ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \ - __ndelay(n)) - -#endif /* __ASM_AVR32_DELAY_H */ diff --git a/include/asm-avr32/device.h b/include/asm-avr32/device.h deleted file mode 100644 index d8f9872b0e2d..000000000000 --- a/include/asm-avr32/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/include/asm-avr32/div64.h b/include/asm-avr32/div64.h deleted file mode 100644 index d7ddd4fdeca6..000000000000 --- a/include/asm-avr32/div64.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_DIV64_H -#define __ASM_AVR32_DIV64_H - -#include - -#endif /* __ASM_AVR32_DIV64_H */ diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h deleted file mode 100644 index 0399359ab5d8..000000000000 --- a/include/asm-avr32/dma-mapping.h +++ /dev/null @@ -1,349 +0,0 @@ -#ifndef __ASM_AVR32_DMA_MAPPING_H -#define __ASM_AVR32_DMA_MAPPING_H - -#include -#include -#include -#include -#include -#include - -extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - int direction); - -/* - * Return whether the given device DMA address mask can be supported - * properly. For example, if your device can only drive the low 24-bits - * during bus mastering, then you would pass 0x00ffffff as the mask - * to this function. - */ -static inline int dma_supported(struct device *dev, u64 mask) -{ - /* Fix when needed. I really don't know of any limitations */ - return 1; -} - -static inline int dma_set_mask(struct device *dev, u64 dma_mask) -{ - if (!dev->dma_mask || !dma_supported(dev, dma_mask)) - return -EIO; - - *dev->dma_mask = dma_mask; - return 0; -} - -/* - * dma_map_single can't fail as it is implemented now. - */ -static inline int dma_mapping_error(struct device *dev, dma_addr_t addr) -{ - return 0; -} - -/** - * dma_alloc_coherent - allocate consistent memory for DMA - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @size: required memory size - * @handle: bus-specific DMA address - * - * Allocate some uncached, unbuffered memory for a device for - * performing DMA. This function allocates pages, and will - * return the CPU-viewed address, and sets @handle to be the - * device-viewed address. - */ -extern void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *handle, gfp_t gfp); - -/** - * dma_free_coherent - free memory allocated by dma_alloc_coherent - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @size: size of memory originally requested in dma_alloc_coherent - * @cpu_addr: CPU-view address returned from dma_alloc_coherent - * @handle: device-view address returned from dma_alloc_coherent - * - * Free (and unmap) a DMA buffer previously allocated by - * dma_alloc_coherent(). - * - * References to memory and mappings associated with cpu_addr/handle - * during and after this call executing are illegal. - */ -extern void dma_free_coherent(struct device *dev, size_t size, - void *cpu_addr, dma_addr_t handle); - -/** - * dma_alloc_writecombine - allocate write-combining memory for DMA - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @size: required memory size - * @handle: bus-specific DMA address - * - * Allocate some uncached, buffered memory for a device for - * performing DMA. This function allocates pages, and will - * return the CPU-viewed address, and sets @handle to be the - * device-viewed address. - */ -extern void *dma_alloc_writecombine(struct device *dev, size_t size, - dma_addr_t *handle, gfp_t gfp); - -/** - * dma_free_coherent - free memory allocated by dma_alloc_writecombine - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @size: size of memory originally requested in dma_alloc_writecombine - * @cpu_addr: CPU-view address returned from dma_alloc_writecombine - * @handle: device-view address returned from dma_alloc_writecombine - * - * Free (and unmap) a DMA buffer previously allocated by - * dma_alloc_writecombine(). - * - * References to memory and mappings associated with cpu_addr/handle - * during and after this call executing are illegal. - */ -extern void dma_free_writecombine(struct device *dev, size_t size, - void *cpu_addr, dma_addr_t handle); - -/** - * dma_map_single - map a single buffer for streaming DMA - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @cpu_addr: CPU direct mapped address of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction - * - * Ensure that any data held in the cache is appropriately discarded - * or written back. - * - * The device owns this memory once this call has completed. The CPU - * can regain ownership by calling dma_unmap_single() or dma_sync_single(). - */ -static inline dma_addr_t -dma_map_single(struct device *dev, void *cpu_addr, size_t size, - enum dma_data_direction direction) -{ - dma_cache_sync(dev, cpu_addr, size, direction); - return virt_to_bus(cpu_addr); -} - -/** - * dma_unmap_single - unmap a single buffer previously mapped - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @handle: DMA address of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction - * - * Unmap a single streaming mode DMA translation. The handle and size - * must match what was provided in the previous dma_map_single() call. - * All other usages are undefined. - * - * After this call, reads by the CPU to the buffer are guaranteed to see - * whatever the device wrote there. - */ -static inline void -dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - -} - -/** - * dma_map_page - map a portion of a page for streaming DMA - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @page: page that buffer resides in - * @offset: offset into page for start of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction - * - * Ensure that any data held in the cache is appropriately discarded - * or written back. - * - * The device owns this memory once this call has completed. The CPU - * can regain ownership by calling dma_unmap_page() or dma_sync_single(). - */ -static inline dma_addr_t -dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - return dma_map_single(dev, page_address(page) + offset, - size, direction); -} - -/** - * dma_unmap_page - unmap a buffer previously mapped through dma_map_page() - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @handle: DMA address of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction - * - * Unmap a single streaming mode DMA translation. The handle and size - * must match what was provided in the previous dma_map_single() call. - * All other usages are undefined. - * - * After this call, reads by the CPU to the buffer are guaranteed to see - * whatever the device wrote there. - */ -static inline void -dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - dma_unmap_single(dev, dma_address, size, direction); -} - -/** - * dma_map_sg - map a set of SG buffers for streaming mode DMA - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @sg: list of buffers - * @nents: number of buffers to map - * @dir: DMA transfer direction - * - * Map a set of buffers described by scatterlist in streaming - * mode for DMA. This is the scatter-gather version of the - * above pci_map_single interface. Here the scatter gather list - * elements are each tagged with the appropriate dma address - * and length. They are obtained via sg_dma_{address,length}(SG). - * - * NOTE: An implementation may be able to use a smaller number of - * DMA address/length pairs than there are SG table elements. - * (for example via virtual mapping capabilities) - * The routine returns the number of addr/length pairs actually - * used, at most nents. - * - * Device ownership issues as mentioned above for pci_map_single are - * the same here. - */ -static inline int -dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - for (i = 0; i < nents; i++) { - char *virt; - - sg[i].dma_address = page_to_bus(sg_page(&sg[i])) + sg[i].offset; - virt = sg_virt(&sg[i]); - dma_cache_sync(dev, virt, sg[i].length, direction); - } - - return nents; -} - -/** - * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @sg: list of buffers - * @nents: number of buffers to map - * @dir: DMA transfer direction - * - * Unmap a set of streaming mode DMA translations. - * Again, CPU read rules concerning calls here are the same as for - * pci_unmap_single() above. - */ -static inline void -dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - -} - -/** - * dma_sync_single_for_cpu - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @handle: DMA address of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction - * - * Make physical memory consistent for a single streaming mode DMA - * translation after a transfer. - * - * If you perform a dma_map_single() but wish to interrogate the - * buffer using the cpu, yet do not wish to teardown the DMA mapping, - * you must call this function before doing so. At the next point you - * give the DMA address back to the card, you must first perform a - * dma_sync_single_for_device, and then the device again owns the - * buffer. - */ -static inline void -dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - /* - * No need to do anything since the CPU isn't supposed to - * touch this memory after we flushed it at mapping- or - * sync-for-device time. - */ -} - -static inline void -dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction); -} - -static inline void -dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - /* just sync everything, that's all the pci API can do */ - dma_sync_single_for_cpu(dev, dma_handle, offset+size, direction); -} - -static inline void -dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - /* just sync everything, that's all the pci API can do */ - dma_sync_single_for_device(dev, dma_handle, offset+size, direction); -} - -/** - * dma_sync_sg_for_cpu - * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices - * @sg: list of buffers - * @nents: number of buffers to map - * @dir: DMA transfer direction - * - * Make physical memory consistent for a set of streaming - * mode DMA translations after a transfer. - * - * The same as dma_sync_single_for_* but for a scatter-gather list, - * same rules and usage. - */ -static inline void -dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction) -{ - /* - * No need to do anything since the CPU isn't supposed to - * touch this memory after we flushed it at mapping- or - * sync-for-device time. - */ -} - -static inline void -dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction) -{ - int i; - - for (i = 0; i < nents; i++) { - dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, direction); - } -} - -/* Now for the API extensions over the pci_ one */ - -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) - -static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -static inline int dma_get_cache_alignment(void) -{ - return boot_cpu_data.dcache.linesz; -} - -#endif /* __ASM_AVR32_DMA_MAPPING_H */ diff --git a/include/asm-avr32/dma.h b/include/asm-avr32/dma.h deleted file mode 100644 index 9e91205590ac..000000000000 --- a/include/asm-avr32/dma.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_AVR32_DMA_H -#define __ASM_AVR32_DMA_H - -/* The maximum address that we can perform a DMA transfer to on this platform. - * Not really applicable to AVR32, but some functions need it. */ -#define MAX_DMA_ADDRESS 0xffffffff - -#endif /* __ASM_AVR32_DMA_H */ diff --git a/include/asm-avr32/elf.h b/include/asm-avr32/elf.h deleted file mode 100644 index 64ce40ee1d58..000000000000 --- a/include/asm-avr32/elf.h +++ /dev/null @@ -1,108 +0,0 @@ -#ifndef __ASM_AVR32_ELF_H -#define __ASM_AVR32_ELF_H - -/* AVR32 relocation numbers */ -#define R_AVR32_NONE 0 -#define R_AVR32_32 1 -#define R_AVR32_16 2 -#define R_AVR32_8 3 -#define R_AVR32_32_PCREL 4 -#define R_AVR32_16_PCREL 5 -#define R_AVR32_8_PCREL 6 -#define R_AVR32_DIFF32 7 -#define R_AVR32_DIFF16 8 -#define R_AVR32_DIFF8 9 -#define R_AVR32_GOT32 10 -#define R_AVR32_GOT16 11 -#define R_AVR32_GOT8 12 -#define R_AVR32_21S 13 -#define R_AVR32_16U 14 -#define R_AVR32_16S 15 -#define R_AVR32_8S 16 -#define R_AVR32_8S_EXT 17 -#define R_AVR32_22H_PCREL 18 -#define R_AVR32_18W_PCREL 19 -#define R_AVR32_16B_PCREL 20 -#define R_AVR32_16N_PCREL 21 -#define R_AVR32_14UW_PCREL 22 -#define R_AVR32_11H_PCREL 23 -#define R_AVR32_10UW_PCREL 24 -#define R_AVR32_9H_PCREL 25 -#define R_AVR32_9UW_PCREL 26 -#define R_AVR32_HI16 27 -#define R_AVR32_LO16 28 -#define R_AVR32_GOTPC 29 -#define R_AVR32_GOTCALL 30 -#define R_AVR32_LDA_GOT 31 -#define R_AVR32_GOT21S 32 -#define R_AVR32_GOT18SW 33 -#define R_AVR32_GOT16S 34 -#define R_AVR32_GOT7UW 35 -#define R_AVR32_32_CPENT 36 -#define R_AVR32_CPCALL 37 -#define R_AVR32_16_CP 38 -#define R_AVR32_9W_CP 39 -#define R_AVR32_RELATIVE 40 -#define R_AVR32_GLOB_DAT 41 -#define R_AVR32_JMP_SLOT 42 -#define R_AVR32_ALIGN 43 - -/* - * ELF register definitions.. - */ - -#include -#include - -typedef unsigned long elf_greg_t; - -#define ELF_NGREG (sizeof (struct pt_regs) / sizeof (elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct user_fpu_struct elf_fpregset_t; - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ( (x)->e_machine == EM_AVR32 ) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#ifdef __LITTLE_ENDIAN__ -#define ELF_DATA ELFDATA2LSB -#else -#define ELF_DATA ELFDATA2MSB -#endif -#define ELF_ARCH EM_AVR32 - -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE 4096 - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) - - -/* This yields a mask that user programs can use to figure out what - instruction set this CPU supports. This could be done in user space, - but it's not easy, and we've already done it here. */ - -#define ELF_HWCAP (0) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. - - For the moment, we have only optimizations for the Intel generations, - but that could change... */ - -#define ELF_PLATFORM (NULL) - -#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) - -#endif /* __ASM_AVR32_ELF_H */ diff --git a/include/asm-avr32/emergency-restart.h b/include/asm-avr32/emergency-restart.h deleted file mode 100644 index 3e7e014776ba..000000000000 --- a/include/asm-avr32/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_EMERGENCY_RESTART_H -#define __ASM_AVR32_EMERGENCY_RESTART_H - -#include - -#endif /* __ASM_AVR32_EMERGENCY_RESTART_H */ diff --git a/include/asm-avr32/errno.h b/include/asm-avr32/errno.h deleted file mode 100644 index 558a7249f06d..000000000000 --- a/include/asm-avr32/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_ERRNO_H -#define __ASM_AVR32_ERRNO_H - -#include - -#endif /* __ASM_AVR32_ERRNO_H */ diff --git a/include/asm-avr32/fb.h b/include/asm-avr32/fb.h deleted file mode 100644 index 41baf84ad402..000000000000 --- a/include/asm-avr32/fb.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ - -#include -#include -#include - -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - vma->vm_page_prot = __pgprot((pgprot_val(vma->vm_page_prot) - & ~_PAGE_CACHABLE) - | (_PAGE_BUFFER | _PAGE_DIRTY)); -} - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-avr32/fcntl.h b/include/asm-avr32/fcntl.h deleted file mode 100644 index 14c0c4402b11..000000000000 --- a/include/asm-avr32/fcntl.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_FCNTL_H -#define __ASM_AVR32_FCNTL_H - -#include - -#endif /* __ASM_AVR32_FCNTL_H */ diff --git a/include/asm-avr32/futex.h b/include/asm-avr32/futex.h deleted file mode 100644 index 10419f14a68a..000000000000 --- a/include/asm-avr32/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_FUTEX_H -#define __ASM_AVR32_FUTEX_H - -#include - -#endif /* __ASM_AVR32_FUTEX_H */ diff --git a/include/asm-avr32/gpio.h b/include/asm-avr32/gpio.h deleted file mode 100644 index 19e8ccc77db3..000000000000 --- a/include/asm-avr32/gpio.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_GPIO_H -#define __ASM_AVR32_GPIO_H - -#include - -#endif /* __ASM_AVR32_GPIO_H */ diff --git a/include/asm-avr32/hardirq.h b/include/asm-avr32/hardirq.h deleted file mode 100644 index 267354356f60..000000000000 --- a/include/asm-avr32/hardirq.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef __ASM_AVR32_HARDIRQ_H -#define __ASM_AVR32_HARDIRQ_H - -#include -#include - -#ifndef __ASSEMBLY__ - -#include - -/* entry.S is sensitive to the offsets of these fields */ -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -void ack_bad_irq(unsigned int irq); - -/* Standard mappings for irq_cpustat_t above */ -#include - -#endif /* __ASSEMBLY__ */ - -#define HARDIRQ_BITS 12 - -/* - * The hardirq mask has to be large enough to have - * space for potentially all IRQ sources in the system - * nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -#endif /* __ASM_AVR32_HARDIRQ_H */ diff --git a/include/asm-avr32/hw_irq.h b/include/asm-avr32/hw_irq.h deleted file mode 100644 index 218b0a6bfd1b..000000000000 --- a/include/asm-avr32/hw_irq.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_AVR32_HW_IRQ_H -#define __ASM_AVR32_HW_IRQ_H - -static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) -{ - /* Nothing to do */ -} - -#endif /* __ASM_AVR32_HW_IRQ_H */ diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h deleted file mode 100644 index 8be7ea9c9047..000000000000 --- a/include/asm-avr32/io.h +++ /dev/null @@ -1,312 +0,0 @@ -#ifndef __ASM_AVR32_IO_H -#define __ASM_AVR32_IO_H - -#include -#include -#include - -#include -#include - -#include - -/* virt_to_phys will only work when address is in P1 or P2 */ -static __inline__ unsigned long virt_to_phys(volatile void *address) -{ - return PHYSADDR(address); -} - -static __inline__ void * phys_to_virt(unsigned long address) -{ - return (void *)P1SEGADDR(address); -} - -#define cached_to_phys(addr) ((unsigned long)PHYSADDR(addr)) -#define uncached_to_phys(addr) ((unsigned long)PHYSADDR(addr)) -#define phys_to_cached(addr) ((void *)P1SEGADDR(addr)) -#define phys_to_uncached(addr) ((void *)P2SEGADDR(addr)) - -/* - * Generic IO read/write. These perform native-endian accesses. Note - * that some architectures will want to re-define __raw_{read,write}w. - */ -extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen); -extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen); -extern void __raw_writesl(void __iomem *addr, const void *data, int longlen); - -extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen); -extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen); -extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); - -static inline void __raw_writeb(u8 v, volatile void __iomem *addr) -{ - *(volatile u8 __force *)addr = v; -} -static inline void __raw_writew(u16 v, volatile void __iomem *addr) -{ - *(volatile u16 __force *)addr = v; -} -static inline void __raw_writel(u32 v, volatile void __iomem *addr) -{ - *(volatile u32 __force *)addr = v; -} - -static inline u8 __raw_readb(const volatile void __iomem *addr) -{ - return *(const volatile u8 __force *)addr; -} -static inline u16 __raw_readw(const volatile void __iomem *addr) -{ - return *(const volatile u16 __force *)addr; -} -static inline u32 __raw_readl(const volatile void __iomem *addr) -{ - return *(const volatile u32 __force *)addr; -} - -/* Convert I/O port address to virtual address */ -#ifndef __io -# define __io(p) ((void *)phys_to_uncached(p)) -#endif - -/* - * Not really sure about the best way to slow down I/O on - * AVR32. Defining it as a no-op until we have an actual test case. - */ -#define SLOW_DOWN_IO do { } while (0) - -#define __BUILD_MEMORY_SINGLE(pfx, bwl, type) \ -static inline void \ -pfx##write##bwl(type val, volatile void __iomem *addr) \ -{ \ - volatile type *__addr; \ - type __val; \ - \ - __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \ - __val = pfx##ioswab##bwl(__addr, val); \ - \ - BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ - \ - *__addr = __val; \ -} \ - \ -static inline type pfx##read##bwl(const volatile void __iomem *addr) \ -{ \ - volatile type *__addr; \ - type __val; \ - \ - __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \ - \ - BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ - \ - __val = *__addr; \ - return pfx##ioswab##bwl(__addr, __val); \ -} - -#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow) \ -static inline void pfx##out##bwl##p(type val, unsigned long port) \ -{ \ - volatile type *__addr; \ - type __val; \ - \ - __addr = __io(__swizzle_addr_##bwl(port)); \ - __val = pfx##ioswab##bwl(__addr, val); \ - \ - BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ - \ - *__addr = __val; \ - slow; \ -} \ - \ -static inline type pfx##in##bwl##p(unsigned long port) \ -{ \ - volatile type *__addr; \ - type __val; \ - \ - __addr = __io(__swizzle_addr_##bwl(port)); \ - \ - BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ - \ - __val = *__addr; \ - slow; \ - \ - return pfx##ioswab##bwl(__addr, __val); \ -} - -#define __BUILD_MEMORY_PFX(bus, bwl, type) \ - __BUILD_MEMORY_SINGLE(bus, bwl, type) - -#define BUILDIO_MEM(bwl, type) \ - __BUILD_MEMORY_PFX(, bwl, type) \ - __BUILD_MEMORY_PFX(__mem_, bwl, type) - -#define __BUILD_IOPORT_PFX(bus, bwl, type) \ - __BUILD_IOPORT_SINGLE(bus, bwl, type, ,) \ - __BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO) - -#define BUILDIO_IOPORT(bwl, type) \ - __BUILD_IOPORT_PFX(, bwl, type) \ - __BUILD_IOPORT_PFX(__mem_, bwl, type) - -BUILDIO_MEM(b, u8) -BUILDIO_MEM(w, u16) -BUILDIO_MEM(l, u32) - -BUILDIO_IOPORT(b, u8) -BUILDIO_IOPORT(w, u16) -BUILDIO_IOPORT(l, u32) - -#define readb_relaxed readb -#define readw_relaxed readw -#define readl_relaxed readl - -#define __BUILD_MEMORY_STRING(bwl, type) \ -static inline void writes##bwl(volatile void __iomem *addr, \ - const void *data, unsigned int count) \ -{ \ - const type *__data = data; \ - \ - while (count--) \ - __mem_write##bwl(*__data++, addr); \ -} \ - \ -static inline void reads##bwl(const volatile void __iomem *addr, \ - void *data, unsigned int count) \ -{ \ - type *__data = data; \ - \ - while (count--) \ - *__data++ = __mem_read##bwl(addr); \ -} - -#define __BUILD_IOPORT_STRING(bwl, type) \ -static inline void outs##bwl(unsigned long port, const void *data, \ - unsigned int count) \ -{ \ - const type *__data = data; \ - \ - while (count--) \ - __mem_out##bwl(*__data++, port); \ -} \ - \ -static inline void ins##bwl(unsigned long port, void *data, \ - unsigned int count) \ -{ \ - type *__data = data; \ - \ - while (count--) \ - *__data++ = __mem_in##bwl(port); \ -} - -#define BUILDSTRING(bwl, type) \ - __BUILD_MEMORY_STRING(bwl, type) \ - __BUILD_IOPORT_STRING(bwl, type) - -BUILDSTRING(b, u8) -BUILDSTRING(w, u16) -BUILDSTRING(l, u32) - -/* - * io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be - */ -#ifndef ioread8 - -#define ioread8(p) ((unsigned int)readb(p)) - -#define ioread16(p) ((unsigned int)readw(p)) -#define ioread16be(p) ((unsigned int)__raw_readw(p)) - -#define ioread32(p) ((unsigned int)readl(p)) -#define ioread32be(p) ((unsigned int)__raw_readl(p)) - -#define iowrite8(v,p) writeb(v, p) - -#define iowrite16(v,p) writew(v, p) -#define iowrite16be(v,p) __raw_writew(v, p) - -#define iowrite32(v,p) writel(v, p) -#define iowrite32be(v,p) __raw_writel(v, p) - -#define ioread8_rep(p,d,c) readsb(p,d,c) -#define ioread16_rep(p,d,c) readsw(p,d,c) -#define ioread32_rep(p,d,c) readsl(p,d,c) - -#define iowrite8_rep(p,s,c) writesb(p,s,c) -#define iowrite16_rep(p,s,c) writesw(p,s,c) -#define iowrite32_rep(p,s,c) writesl(p,s,c) - -#endif - -static inline void memcpy_fromio(void * to, const volatile void __iomem *from, - unsigned long count) -{ - memcpy(to, (const void __force *)from, count); -} - -static inline void memcpy_toio(volatile void __iomem *to, const void * from, - unsigned long count) -{ - memcpy((void __force *)to, from, count); -} - -static inline void memset_io(volatile void __iomem *addr, unsigned char val, - unsigned long count) -{ - memset((void __force *)addr, val, count); -} - -#define mmiowb() - -#define IO_SPACE_LIMIT 0xffffffff - -extern void __iomem *__ioremap(unsigned long offset, size_t size, - unsigned long flags); -extern void __iounmap(void __iomem *addr); - -/* - * ioremap - map bus memory into CPU space - * @offset bus address of the memory - * @size size of the resource to map - * - * ioremap performs a platform specific sequence of operations to make - * bus memory CPU accessible via the readb/.../writel functions and - * the other mmio helpers. The returned address is not guaranteed to - * be usable directly as a virtual address. - */ -#define ioremap(offset, size) \ - __ioremap((offset), (size), 0) - -#define ioremap_nocache(offset, size) \ - __ioremap((offset), (size), 0) - -#define iounmap(addr) \ - __iounmap(addr) - -#define cached(addr) P1SEGADDR(addr) -#define uncached(addr) P2SEGADDR(addr) - -#define virt_to_bus virt_to_phys -#define bus_to_virt phys_to_virt -#define page_to_bus page_to_phys -#define bus_to_page phys_to_page - -/* - * Create a virtual mapping cookie for an IO port range. There exists - * no such thing as port-based I/O on AVR32, so a regular ioremap() - * should do what we need. - */ -#define ioport_map(port, nr) ioremap(port, nr) -#define ioport_unmap(port) iounmap(port) - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* __ASM_AVR32_IO_H */ diff --git a/include/asm-avr32/ioctl.h b/include/asm-avr32/ioctl.h deleted file mode 100644 index c8472c1398ef..000000000000 --- a/include/asm-avr32/ioctl.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_IOCTL_H -#define __ASM_AVR32_IOCTL_H - -#include - -#endif /* __ASM_AVR32_IOCTL_H */ diff --git a/include/asm-avr32/ioctls.h b/include/asm-avr32/ioctls.h deleted file mode 100644 index 0cf2c0a4502b..000000000000 --- a/include/asm-avr32/ioctls.h +++ /dev/null @@ -1,87 +0,0 @@ -#ifndef __ASM_AVR32_IOCTLS_H -#define __ASM_AVR32_IOCTLS_H - -#include - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */ -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T',0x2A, struct termios2) -#define TCSETS2 _IOW('T',0x2B, struct termios2) -#define TCSETSW2 _IOW('T',0x2C, struct termios2) -#define TCSETSF2 _IOW('T',0x2D, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ -#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ -#define FIOQSIZE 0x5460 - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* __ASM_AVR32_IOCTLS_H */ diff --git a/include/asm-avr32/ipcbuf.h b/include/asm-avr32/ipcbuf.h deleted file mode 100644 index 1552c9698f5e..000000000000 --- a/include/asm-avr32/ipcbuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __ASM_AVR32_IPCBUF_H -#define __ASM_AVR32_IPCBUF_H - -/* -* The user_ipc_perm structure for AVR32 architecture. -* Note extra padding because this structure is passed back and forth -* between kernel and user space. -* -* Pad space is left for: -* - 32-bit mode_t and seq -* - 2 miscellaneous 32-bit values -*/ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __ASM_AVR32_IPCBUF_H */ diff --git a/include/asm-avr32/irq.h b/include/asm-avr32/irq.h deleted file mode 100644 index c563b7720c1a..000000000000 --- a/include/asm-avr32/irq.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef __ASM_AVR32_IRQ_H -#define __ASM_AVR32_IRQ_H - -#define NR_INTERNAL_IRQS 64 - -#include - -#ifndef NR_IRQS -#define NR_IRQS (NR_INTERNAL_IRQS) -#endif - -#define irq_canonicalize(i) (i) - -#ifndef __ASSEMBLER__ -int nmi_enable(void); -void nmi_disable(void); - -/* - * Returns a bitmask of pending interrupts in a group. - */ -extern unsigned long intc_get_pending(unsigned int group); -#endif - -#endif /* __ASM_AVR32_IOCTLS_H */ diff --git a/include/asm-avr32/irq_regs.h b/include/asm-avr32/irq_regs.h deleted file mode 100644 index 3dd9c0b70270..000000000000 --- a/include/asm-avr32/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-avr32/irqflags.h b/include/asm-avr32/irqflags.h deleted file mode 100644 index 93570daac38a..000000000000 --- a/include/asm-avr32/irqflags.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_IRQFLAGS_H -#define __ASM_AVR32_IRQFLAGS_H - -#include - -static inline unsigned long __raw_local_save_flags(void) -{ - return sysreg_read(SR); -} - -#define raw_local_save_flags(x) \ - do { (x) = __raw_local_save_flags(); } while (0) - -/* - * This will restore ALL status register flags, not only the interrupt - * mask flag. - * - * The empty asm statement informs the compiler of this fact while - * also serving as a barrier. - */ -static inline void raw_local_irq_restore(unsigned long flags) -{ - sysreg_write(SR, flags); - asm volatile("" : : : "memory", "cc"); -} - -static inline void raw_local_irq_disable(void) -{ - asm volatile("ssrf %0" : : "n"(SYSREG_GM_OFFSET) : "memory"); -} - -static inline void raw_local_irq_enable(void) -{ - asm volatile("csrf %0" : : "n"(SYSREG_GM_OFFSET) : "memory"); -} - -static inline int raw_irqs_disabled_flags(unsigned long flags) -{ - return (flags & SYSREG_BIT(GM)) != 0; -} - -static inline int raw_irqs_disabled(void) -{ - unsigned long flags = __raw_local_save_flags(); - - return raw_irqs_disabled_flags(flags); -} - -static inline unsigned long __raw_local_irq_save(void) -{ - unsigned long flags = __raw_local_save_flags(); - - raw_local_irq_disable(); - - return flags; -} - -#define raw_local_irq_save(flags) \ - do { (flags) = __raw_local_irq_save(); } while (0) - -#endif /* __ASM_AVR32_IRQFLAGS_H */ diff --git a/include/asm-avr32/kdebug.h b/include/asm-avr32/kdebug.h deleted file mode 100644 index ca4f9542365a..000000000000 --- a/include/asm-avr32/kdebug.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_AVR32_KDEBUG_H -#define __ASM_AVR32_KDEBUG_H - -/* Grossly misnamed. */ -enum die_val { - DIE_BREAKPOINT, - DIE_SSTEP, - DIE_NMI, -}; - -#endif /* __ASM_AVR32_KDEBUG_H */ diff --git a/include/asm-avr32/kmap_types.h b/include/asm-avr32/kmap_types.h deleted file mode 100644 index b7f5c6870107..000000000000 --- a/include/asm-avr32/kmap_types.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef __ASM_AVR32_KMAP_TYPES_H -#define __ASM_AVR32_KMAP_TYPES_H - -#ifdef CONFIG_DEBUG_HIGHMEM -# define D(n) __KM_FENCE_##n , -#else -# define D(n) -#endif - -enum km_type { -D(0) KM_BOUNCE_READ, -D(1) KM_SKB_SUNRPC_DATA, -D(2) KM_SKB_DATA_SOFTIRQ, -D(3) KM_USER0, -D(4) KM_USER1, -D(5) KM_BIO_SRC_IRQ, -D(6) KM_BIO_DST_IRQ, -D(7) KM_PTE0, -D(8) KM_PTE1, -D(9) KM_PTE2, -D(10) KM_IRQ0, -D(11) KM_IRQ1, -D(12) KM_SOFTIRQ0, -D(13) KM_SOFTIRQ1, -D(14) KM_TYPE_NR -}; - -#undef D - -#endif /* __ASM_AVR32_KMAP_TYPES_H */ diff --git a/include/asm-avr32/kprobes.h b/include/asm-avr32/kprobes.h deleted file mode 100644 index 996cb656474e..000000000000 --- a/include/asm-avr32/kprobes.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Kernel Probes (KProbes) - * - * Copyright (C) 2005-2006 Atmel Corporation - * Copyright (C) IBM Corporation, 2002, 2004 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_KPROBES_H -#define __ASM_AVR32_KPROBES_H - -#include - -typedef u16 kprobe_opcode_t; -#define BREAKPOINT_INSTRUCTION 0xd673 /* breakpoint */ -#define MAX_INSN_SIZE 2 - -#define kretprobe_blacklist_size 0 - -#define arch_remove_kprobe(p) do { } while (0) - -/* Architecture specific copy of original instruction */ -struct arch_specific_insn { - kprobe_opcode_t insn[MAX_INSN_SIZE]; -}; - -extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr); -extern int kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data); - -#define flush_insn_slot(p) do { } while (0) - -#endif /* __ASM_AVR32_KPROBES_H */ diff --git a/include/asm-avr32/linkage.h b/include/asm-avr32/linkage.h deleted file mode 100644 index f7b285e910d4..000000000000 --- a/include/asm-avr32/linkage.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -#define __ALIGN .balign 2 -#define __ALIGN_STR ".balign 2" - -#endif /* __ASM_LINKAGE_H */ diff --git a/include/asm-avr32/local.h b/include/asm-avr32/local.h deleted file mode 100644 index 1c1619694da3..000000000000 --- a/include/asm-avr32/local.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_LOCAL_H -#define __ASM_AVR32_LOCAL_H - -#include - -#endif /* __ASM_AVR32_LOCAL_H */ diff --git a/include/asm-avr32/mach/serial_at91.h b/include/asm-avr32/mach/serial_at91.h deleted file mode 100644 index 55b317a89061..000000000000 --- a/include/asm-avr32/mach/serial_at91.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * linux/include/asm-arm/mach/serial_at91.h - * - * Based on serial_sa1100.h by Nicolas Pitre - * - * Copyright (C) 2002 ATMEL Rousset - * - * Low level machine dependent UART functions. - */ - -struct uart_port; - -/* - * This is a temporary structure for registering these - * functions; it is intended to be discarded after boot. - */ -struct atmel_port_fns { - void (*set_mctrl)(struct uart_port *, u_int); - u_int (*get_mctrl)(struct uart_port *); - void (*enable_ms)(struct uart_port *); - void (*pm)(struct uart_port *, u_int, u_int); - int (*set_wake)(struct uart_port *, u_int); - int (*open)(struct uart_port *); - void (*close)(struct uart_port *); -}; - -#if defined(CONFIG_SERIAL_ATMEL) -void atmel_register_uart_fns(struct atmel_port_fns *fns); -#else -#define atmel_register_uart_fns(fns) do { } while (0) -#endif - - diff --git a/include/asm-avr32/mman.h b/include/asm-avr32/mman.h deleted file mode 100644 index 648f91e7187a..000000000000 --- a/include/asm-avr32/mman.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_AVR32_MMAN_H__ -#define __ASM_AVR32_MMAN_H__ - -#include - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* __ASM_AVR32_MMAN_H__ */ diff --git a/include/asm-avr32/mmu.h b/include/asm-avr32/mmu.h deleted file mode 100644 index 60c2d2650d32..000000000000 --- a/include/asm-avr32/mmu.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_AVR32_MMU_H -#define __ASM_AVR32_MMU_H - -/* Default "unsigned long" context */ -typedef unsigned long mm_context_t; - -#define MMU_ITLB_ENTRIES 64 -#define MMU_DTLB_ENTRIES 64 - -#endif /* __ASM_AVR32_MMU_H */ diff --git a/include/asm-avr32/mmu_context.h b/include/asm-avr32/mmu_context.h deleted file mode 100644 index 27ff23407100..000000000000 --- a/include/asm-avr32/mmu_context.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * ASID handling taken from SH implementation. - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_MMU_CONTEXT_H -#define __ASM_AVR32_MMU_CONTEXT_H - -#include -#include -#include - -/* - * The MMU "context" consists of two things: - * (a) TLB cache version - * (b) ASID (Address Space IDentifier) - */ -#define MMU_CONTEXT_ASID_MASK 0x000000ff -#define MMU_CONTEXT_VERSION_MASK 0xffffff00 -#define MMU_CONTEXT_FIRST_VERSION 0x00000100 -#define NO_CONTEXT 0 - -#define MMU_NO_ASID 0x100 - -/* Virtual Page Number mask */ -#define MMU_VPN_MASK 0xfffff000 - -/* Cache of MMU context last used */ -extern unsigned long mmu_context_cache; - -/* - * Get MMU context if needed - */ -static inline void -get_mmu_context(struct mm_struct *mm) -{ - unsigned long mc = mmu_context_cache; - - if (((mm->context ^ mc) & MMU_CONTEXT_VERSION_MASK) == 0) - /* It's up to date, do nothing */ - return; - - /* It's old, we need to get new context with new version */ - mc = ++mmu_context_cache; - if (!(mc & MMU_CONTEXT_ASID_MASK)) { - /* - * We have exhausted all ASIDs of this version. - * Flush the TLB and start new cycle. - */ - flush_tlb_all(); - /* - * Fix version. Note that we avoid version #0 - * to distinguish NO_CONTEXT. - */ - if (!mc) - mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION; - } - mm->context = mc; -} - -/* - * Initialize the context related info for a new mm_struct - * instance. - */ -static inline int init_new_context(struct task_struct *tsk, - struct mm_struct *mm) -{ - mm->context = NO_CONTEXT; - return 0; -} - -/* - * Destroy context related info for an mm_struct that is about - * to be put to rest. - */ -static inline void destroy_context(struct mm_struct *mm) -{ - /* Do nothing */ -} - -static inline void set_asid(unsigned long asid) -{ - /* XXX: We're destroying TLBEHI[8:31] */ - sysreg_write(TLBEHI, asid & MMU_CONTEXT_ASID_MASK); - cpu_sync_pipeline(); -} - -static inline unsigned long get_asid(void) -{ - unsigned long asid; - - asid = sysreg_read(TLBEHI); - return asid & MMU_CONTEXT_ASID_MASK; -} - -static inline void activate_context(struct mm_struct *mm) -{ - get_mmu_context(mm); - set_asid(mm->context & MMU_CONTEXT_ASID_MASK); -} - -static inline void switch_mm(struct mm_struct *prev, - struct mm_struct *next, - struct task_struct *tsk) -{ - if (likely(prev != next)) { - unsigned long __pgdir = (unsigned long)next->pgd; - - sysreg_write(PTBR, __pgdir); - activate_context(next); - } -} - -#define deactivate_mm(tsk,mm) do { } while(0) - -#define activate_mm(prev, next) switch_mm((prev), (next), NULL) - -static inline void -enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - - -static inline void enable_mmu(void) -{ - sysreg_write(MMUCR, (SYSREG_BIT(MMUCR_S) - | SYSREG_BIT(E) - | SYSREG_BIT(MMUCR_I))); - nop(); nop(); nop(); nop(); nop(); nop(); nop(); nop(); - - if (mmu_context_cache == NO_CONTEXT) - mmu_context_cache = MMU_CONTEXT_FIRST_VERSION; - - set_asid(mmu_context_cache & MMU_CONTEXT_ASID_MASK); -} - -static inline void disable_mmu(void) -{ - sysreg_write(MMUCR, SYSREG_BIT(MMUCR_S)); -} - -#endif /* __ASM_AVR32_MMU_CONTEXT_H */ diff --git a/include/asm-avr32/module.h b/include/asm-avr32/module.h deleted file mode 100644 index 451444538a1b..000000000000 --- a/include/asm-avr32/module.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __ASM_AVR32_MODULE_H -#define __ASM_AVR32_MODULE_H - -struct mod_arch_syminfo { - unsigned long got_offset; - int got_initialized; -}; - -struct mod_arch_specific { - /* Starting offset of got in the module core memory. */ - unsigned long got_offset; - /* Size of the got. */ - unsigned long got_size; - /* Number of symbols in syminfo. */ - int nsyms; - /* Additional symbol information (got offsets). */ - struct mod_arch_syminfo *syminfo; -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - -#define MODULE_PROC_FAMILY "AVR32v1" - -#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY - -#endif /* __ASM_AVR32_MODULE_H */ diff --git a/include/asm-avr32/msgbuf.h b/include/asm-avr32/msgbuf.h deleted file mode 100644 index ac18bc4da7f7..000000000000 --- a/include/asm-avr32/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef __ASM_AVR32_MSGBUF_H -#define __ASM_AVR32_MSGBUF_H - -/* - * The msqid64_ds structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* __ASM_AVR32_MSGBUF_H */ diff --git a/include/asm-avr32/mutex.h b/include/asm-avr32/mutex.h deleted file mode 100644 index 458c1f7fbc18..000000000000 --- a/include/asm-avr32/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/include/asm-avr32/numnodes.h b/include/asm-avr32/numnodes.h deleted file mode 100644 index 0b864d7ce330..000000000000 --- a/include/asm-avr32/numnodes.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_AVR32_NUMNODES_H -#define __ASM_AVR32_NUMNODES_H - -/* Max 4 nodes */ -#define NODES_SHIFT 2 - -#endif /* __ASM_AVR32_NUMNODES_H */ diff --git a/include/asm-avr32/ocd.h b/include/asm-avr32/ocd.h deleted file mode 100644 index 6bef09490235..000000000000 --- a/include/asm-avr32/ocd.h +++ /dev/null @@ -1,543 +0,0 @@ -/* - * AVR32 OCD Interface and register definitions - * - * Copyright (C) 2004-2007 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_OCD_H -#define __ASM_AVR32_OCD_H - -/* OCD Register offsets. Abbreviations used below: - * - * BP Breakpoint - * Comm Communication - * DT Data Trace - * PC Program Counter - * PID Process ID - * R/W Read/Write - * WP Watchpoint - */ -#define OCD_DID 0x0000 /* Device ID */ -#define OCD_DC 0x0008 /* Development Control */ -#define OCD_DS 0x0010 /* Development Status */ -#define OCD_RWCS 0x001c /* R/W Access Control */ -#define OCD_RWA 0x0024 /* R/W Access Address */ -#define OCD_RWD 0x0028 /* R/W Access Data */ -#define OCD_WT 0x002c /* Watchpoint Trigger */ -#define OCD_DTC 0x0034 /* Data Trace Control */ -#define OCD_DTSA0 0x0038 /* DT Start Addr Channel 0 */ -#define OCD_DTSA1 0x003c /* DT Start Addr Channel 1 */ -#define OCD_DTEA0 0x0048 /* DT End Addr Channel 0 */ -#define OCD_DTEA1 0x004c /* DT End Addr Channel 1 */ -#define OCD_BWC0A 0x0058 /* PC BP/WP Control 0A */ -#define OCD_BWC0B 0x005c /* PC BP/WP Control 0B */ -#define OCD_BWC1A 0x0060 /* PC BP/WP Control 1A */ -#define OCD_BWC1B 0x0064 /* PC BP/WP Control 1B */ -#define OCD_BWC2A 0x0068 /* PC BP/WP Control 2A */ -#define OCD_BWC2B 0x006c /* PC BP/WP Control 2B */ -#define OCD_BWC3A 0x0070 /* Data BP/WP Control 3A */ -#define OCD_BWC3B 0x0074 /* Data BP/WP Control 3B */ -#define OCD_BWA0A 0x0078 /* PC BP/WP Address 0A */ -#define OCD_BWA0B 0x007c /* PC BP/WP Address 0B */ -#define OCD_BWA1A 0x0080 /* PC BP/WP Address 1A */ -#define OCD_BWA1B 0x0084 /* PC BP/WP Address 1B */ -#define OCD_BWA2A 0x0088 /* PC BP/WP Address 2A */ -#define OCD_BWA2B 0x008c /* PC BP/WP Address 2B */ -#define OCD_BWA3A 0x0090 /* Data BP/WP Address 3A */ -#define OCD_BWA3B 0x0094 /* Data BP/WP Address 3B */ -#define OCD_NXCFG 0x0100 /* Nexus Configuration */ -#define OCD_DINST 0x0104 /* Debug Instruction */ -#define OCD_DPC 0x0108 /* Debug Program Counter */ -#define OCD_CPUCM 0x010c /* CPU Control Mask */ -#define OCD_DCCPU 0x0110 /* Debug Comm CPU */ -#define OCD_DCEMU 0x0114 /* Debug Comm Emulator */ -#define OCD_DCSR 0x0118 /* Debug Comm Status */ -#define OCD_PID 0x011c /* Ownership Trace PID */ -#define OCD_EPC0 0x0120 /* Event Pair Control 0 */ -#define OCD_EPC1 0x0124 /* Event Pair Control 1 */ -#define OCD_EPC2 0x0128 /* Event Pair Control 2 */ -#define OCD_EPC3 0x012c /* Event Pair Control 3 */ -#define OCD_AXC 0x0130 /* AUX port Control */ - -/* Bits in DID */ -#define OCD_DID_MID_START 1 -#define OCD_DID_MID_SIZE 11 -#define OCD_DID_PN_START 12 -#define OCD_DID_PN_SIZE 16 -#define OCD_DID_RN_START 28 -#define OCD_DID_RN_SIZE 4 - -/* Bits in DC */ -#define OCD_DC_TM_START 0 -#define OCD_DC_TM_SIZE 2 -#define OCD_DC_EIC_START 3 -#define OCD_DC_EIC_SIZE 2 -#define OCD_DC_OVC_START 5 -#define OCD_DC_OVC_SIZE 3 -#define OCD_DC_SS_BIT 8 -#define OCD_DC_DBR_BIT 12 -#define OCD_DC_DBE_BIT 13 -#define OCD_DC_EOS_START 20 -#define OCD_DC_EOS_SIZE 2 -#define OCD_DC_SQA_BIT 22 -#define OCD_DC_IRP_BIT 23 -#define OCD_DC_IFM_BIT 24 -#define OCD_DC_TOZ_BIT 25 -#define OCD_DC_TSR_BIT 26 -#define OCD_DC_RID_BIT 27 -#define OCD_DC_ORP_BIT 28 -#define OCD_DC_MM_BIT 29 -#define OCD_DC_RES_BIT 30 -#define OCD_DC_ABORT_BIT 31 - -/* Bits in DS */ -#define OCD_DS_SSS_BIT 0 -#define OCD_DS_SWB_BIT 1 -#define OCD_DS_HWB_BIT 2 -#define OCD_DS_HWE_BIT 3 -#define OCD_DS_STP_BIT 4 -#define OCD_DS_DBS_BIT 5 -#define OCD_DS_BP_START 8 -#define OCD_DS_BP_SIZE 8 -#define OCD_DS_INC_BIT 24 -#define OCD_DS_BOZ_BIT 25 -#define OCD_DS_DBA_BIT 26 -#define OCD_DS_EXB_BIT 27 -#define OCD_DS_NTBF_BIT 28 - -/* Bits in RWCS */ -#define OCD_RWCS_DV_BIT 0 -#define OCD_RWCS_ERR_BIT 1 -#define OCD_RWCS_CNT_START 2 -#define OCD_RWCS_CNT_SIZE 14 -#define OCD_RWCS_CRC_BIT 19 -#define OCD_RWCS_NTBC_START 20 -#define OCD_RWCS_NTBC_SIZE 2 -#define OCD_RWCS_NTE_BIT 22 -#define OCD_RWCS_NTAP_BIT 23 -#define OCD_RWCS_WRAPPED_BIT 24 -#define OCD_RWCS_CCTRL_START 25 -#define OCD_RWCS_CCTRL_SIZE 2 -#define OCD_RWCS_SZ_START 27 -#define OCD_RWCS_SZ_SIZE 3 -#define OCD_RWCS_RW_BIT 30 -#define OCD_RWCS_AC_BIT 31 - -/* Bits in RWA */ -#define OCD_RWA_RWA_START 0 -#define OCD_RWA_RWA_SIZE 32 - -/* Bits in RWD */ -#define OCD_RWD_RWD_START 0 -#define OCD_RWD_RWD_SIZE 32 - -/* Bits in WT */ -#define OCD_WT_DTE_START 20 -#define OCD_WT_DTE_SIZE 3 -#define OCD_WT_DTS_START 23 -#define OCD_WT_DTS_SIZE 3 -#define OCD_WT_PTE_START 26 -#define OCD_WT_PTE_SIZE 3 -#define OCD_WT_PTS_START 29 -#define OCD_WT_PTS_SIZE 3 - -/* Bits in DTC */ -#define OCD_DTC_T0WP_BIT 0 -#define OCD_DTC_T1WP_BIT 1 -#define OCD_DTC_ASID0EN_BIT 2 -#define OCD_DTC_ASID0_START 3 -#define OCD_DTC_ASID0_SIZE 8 -#define OCD_DTC_ASID1EN_BIT 11 -#define OCD_DTC_ASID1_START 12 -#define OCD_DTC_ASID1_SIZE 8 -#define OCD_DTC_RWT1_START 28 -#define OCD_DTC_RWT1_SIZE 2 -#define OCD_DTC_RWT0_START 30 -#define OCD_DTC_RWT0_SIZE 2 - -/* Bits in DTSA0 */ -#define OCD_DTSA0_DTSA_START 0 -#define OCD_DTSA0_DTSA_SIZE 32 - -/* Bits in DTSA1 */ -#define OCD_DTSA1_DTSA_START 0 -#define OCD_DTSA1_DTSA_SIZE 32 - -/* Bits in DTEA0 */ -#define OCD_DTEA0_DTEA_START 0 -#define OCD_DTEA0_DTEA_SIZE 32 - -/* Bits in DTEA1 */ -#define OCD_DTEA1_DTEA_START 0 -#define OCD_DTEA1_DTEA_SIZE 32 - -/* Bits in BWC0A */ -#define OCD_BWC0A_ASIDEN_BIT 0 -#define OCD_BWC0A_ASID_START 1 -#define OCD_BWC0A_ASID_SIZE 8 -#define OCD_BWC0A_EOC_BIT 14 -#define OCD_BWC0A_AME_BIT 25 -#define OCD_BWC0A_BWE_START 30 -#define OCD_BWC0A_BWE_SIZE 2 - -/* Bits in BWC0B */ -#define OCD_BWC0B_ASIDEN_BIT 0 -#define OCD_BWC0B_ASID_START 1 -#define OCD_BWC0B_ASID_SIZE 8 -#define OCD_BWC0B_EOC_BIT 14 -#define OCD_BWC0B_AME_BIT 25 -#define OCD_BWC0B_BWE_START 30 -#define OCD_BWC0B_BWE_SIZE 2 - -/* Bits in BWC1A */ -#define OCD_BWC1A_ASIDEN_BIT 0 -#define OCD_BWC1A_ASID_START 1 -#define OCD_BWC1A_ASID_SIZE 8 -#define OCD_BWC1A_EOC_BIT 14 -#define OCD_BWC1A_AME_BIT 25 -#define OCD_BWC1A_BWE_START 30 -#define OCD_BWC1A_BWE_SIZE 2 - -/* Bits in BWC1B */ -#define OCD_BWC1B_ASIDEN_BIT 0 -#define OCD_BWC1B_ASID_START 1 -#define OCD_BWC1B_ASID_SIZE 8 -#define OCD_BWC1B_EOC_BIT 14 -#define OCD_BWC1B_AME_BIT 25 -#define OCD_BWC1B_BWE_START 30 -#define OCD_BWC1B_BWE_SIZE 2 - -/* Bits in BWC2A */ -#define OCD_BWC2A_ASIDEN_BIT 0 -#define OCD_BWC2A_ASID_START 1 -#define OCD_BWC2A_ASID_SIZE 8 -#define OCD_BWC2A_EOC_BIT 14 -#define OCD_BWC2A_AMB_START 20 -#define OCD_BWC2A_AMB_SIZE 5 -#define OCD_BWC2A_AME_BIT 25 -#define OCD_BWC2A_BWE_START 30 -#define OCD_BWC2A_BWE_SIZE 2 - -/* Bits in BWC2B */ -#define OCD_BWC2B_ASIDEN_BIT 0 -#define OCD_BWC2B_ASID_START 1 -#define OCD_BWC2B_ASID_SIZE 8 -#define OCD_BWC2B_EOC_BIT 14 -#define OCD_BWC2B_AME_BIT 25 -#define OCD_BWC2B_BWE_START 30 -#define OCD_BWC2B_BWE_SIZE 2 - -/* Bits in BWC3A */ -#define OCD_BWC3A_ASIDEN_BIT 0 -#define OCD_BWC3A_ASID_START 1 -#define OCD_BWC3A_ASID_SIZE 8 -#define OCD_BWC3A_SIZE_START 9 -#define OCD_BWC3A_SIZE_SIZE 3 -#define OCD_BWC3A_EOC_BIT 14 -#define OCD_BWC3A_BWO_START 16 -#define OCD_BWC3A_BWO_SIZE 2 -#define OCD_BWC3A_BME_START 20 -#define OCD_BWC3A_BME_SIZE 4 -#define OCD_BWC3A_BRW_START 28 -#define OCD_BWC3A_BRW_SIZE 2 -#define OCD_BWC3A_BWE_START 30 -#define OCD_BWC3A_BWE_SIZE 2 - -/* Bits in BWC3B */ -#define OCD_BWC3B_ASIDEN_BIT 0 -#define OCD_BWC3B_ASID_START 1 -#define OCD_BWC3B_ASID_SIZE 8 -#define OCD_BWC3B_SIZE_START 9 -#define OCD_BWC3B_SIZE_SIZE 3 -#define OCD_BWC3B_EOC_BIT 14 -#define OCD_BWC3B_BWO_START 16 -#define OCD_BWC3B_BWO_SIZE 2 -#define OCD_BWC3B_BME_START 20 -#define OCD_BWC3B_BME_SIZE 4 -#define OCD_BWC3B_BRW_START 28 -#define OCD_BWC3B_BRW_SIZE 2 -#define OCD_BWC3B_BWE_START 30 -#define OCD_BWC3B_BWE_SIZE 2 - -/* Bits in BWA0A */ -#define OCD_BWA0A_BWA_START 0 -#define OCD_BWA0A_BWA_SIZE 32 - -/* Bits in BWA0B */ -#define OCD_BWA0B_BWA_START 0 -#define OCD_BWA0B_BWA_SIZE 32 - -/* Bits in BWA1A */ -#define OCD_BWA1A_BWA_START 0 -#define OCD_BWA1A_BWA_SIZE 32 - -/* Bits in BWA1B */ -#define OCD_BWA1B_BWA_START 0 -#define OCD_BWA1B_BWA_SIZE 32 - -/* Bits in BWA2A */ -#define OCD_BWA2A_BWA_START 0 -#define OCD_BWA2A_BWA_SIZE 32 - -/* Bits in BWA2B */ -#define OCD_BWA2B_BWA_START 0 -#define OCD_BWA2B_BWA_SIZE 32 - -/* Bits in BWA3A */ -#define OCD_BWA3A_BWA_START 0 -#define OCD_BWA3A_BWA_SIZE 32 - -/* Bits in BWA3B */ -#define OCD_BWA3B_BWA_START 0 -#define OCD_BWA3B_BWA_SIZE 32 - -/* Bits in NXCFG */ -#define OCD_NXCFG_NXARCH_START 0 -#define OCD_NXCFG_NXARCH_SIZE 4 -#define OCD_NXCFG_NXOCD_START 4 -#define OCD_NXCFG_NXOCD_SIZE 4 -#define OCD_NXCFG_NXPCB_START 8 -#define OCD_NXCFG_NXPCB_SIZE 4 -#define OCD_NXCFG_NXDB_START 12 -#define OCD_NXCFG_NXDB_SIZE 4 -#define OCD_NXCFG_MXMSEO_BIT 16 -#define OCD_NXCFG_NXMDO_START 17 -#define OCD_NXCFG_NXMDO_SIZE 4 -#define OCD_NXCFG_NXPT_BIT 21 -#define OCD_NXCFG_NXOT_BIT 22 -#define OCD_NXCFG_NXDWT_BIT 23 -#define OCD_NXCFG_NXDRT_BIT 24 -#define OCD_NXCFG_NXDTC_START 25 -#define OCD_NXCFG_NXDTC_SIZE 3 -#define OCD_NXCFG_NXDMA_BIT 28 - -/* Bits in DINST */ -#define OCD_DINST_DINST_START 0 -#define OCD_DINST_DINST_SIZE 32 - -/* Bits in CPUCM */ -#define OCD_CPUCM_BEM_BIT 1 -#define OCD_CPUCM_FEM_BIT 2 -#define OCD_CPUCM_REM_BIT 3 -#define OCD_CPUCM_IBEM_BIT 4 -#define OCD_CPUCM_IEEM_BIT 5 - -/* Bits in DCCPU */ -#define OCD_DCCPU_DATA_START 0 -#define OCD_DCCPU_DATA_SIZE 32 - -/* Bits in DCEMU */ -#define OCD_DCEMU_DATA_START 0 -#define OCD_DCEMU_DATA_SIZE 32 - -/* Bits in DCSR */ -#define OCD_DCSR_CPUD_BIT 0 -#define OCD_DCSR_EMUD_BIT 1 - -/* Bits in PID */ -#define OCD_PID_PROCESS_START 0 -#define OCD_PID_PROCESS_SIZE 32 - -/* Bits in EPC0 */ -#define OCD_EPC0_RNG_START 0 -#define OCD_EPC0_RNG_SIZE 2 -#define OCD_EPC0_CE_BIT 4 -#define OCD_EPC0_ECNT_START 16 -#define OCD_EPC0_ECNT_SIZE 16 - -/* Bits in EPC1 */ -#define OCD_EPC1_RNG_START 0 -#define OCD_EPC1_RNG_SIZE 2 -#define OCD_EPC1_ATB_BIT 5 -#define OCD_EPC1_AM_BIT 6 - -/* Bits in EPC2 */ -#define OCD_EPC2_RNG_START 0 -#define OCD_EPC2_RNG_SIZE 2 -#define OCD_EPC2_DB_START 2 -#define OCD_EPC2_DB_SIZE 2 - -/* Bits in EPC3 */ -#define OCD_EPC3_RNG_START 0 -#define OCD_EPC3_RNG_SIZE 2 -#define OCD_EPC3_DWE_BIT 2 - -/* Bits in AXC */ -#define OCD_AXC_DIV_START 0 -#define OCD_AXC_DIV_SIZE 4 -#define OCD_AXC_AXE_BIT 8 -#define OCD_AXC_AXS_BIT 9 -#define OCD_AXC_DDR_BIT 10 -#define OCD_AXC_LS_BIT 11 -#define OCD_AXC_REX_BIT 12 -#define OCD_AXC_REXTEN_BIT 13 - -/* Constants for DC:EIC */ -#define OCD_EIC_PROGRAM_AND_DATA_TRACE 0 -#define OCD_EIC_BREAKPOINT 1 -#define OCD_EIC_NOP 2 - -/* Constants for DC:OVC */ -#define OCD_OVC_OVERRUN 0 -#define OCD_OVC_DELAY_CPU_BTM 1 -#define OCD_OVC_DELAY_CPU_DTM 2 -#define OCD_OVC_DELAY_CPU_BTM_DTM 3 - -/* Constants for DC:EOS */ -#define OCD_EOS_NOP 0 -#define OCD_EOS_DEBUG_MODE 1 -#define OCD_EOS_BREAKPOINT_WATCHPOINT 2 -#define OCD_EOS_THQ 3 - -/* Constants for RWCS:NTBC */ -#define OCD_NTBC_OVERWRITE 0 -#define OCD_NTBC_DISABLE 1 -#define OCD_NTBC_BREAKPOINT 2 - -/* Constants for RWCS:CCTRL */ -#define OCD_CCTRL_AUTO 0 -#define OCD_CCTRL_CACHED 1 -#define OCD_CCTRL_UNCACHED 2 - -/* Constants for RWCS:SZ */ -#define OCD_SZ_BYTE 0 -#define OCD_SZ_HALFWORD 1 -#define OCD_SZ_WORD 2 - -/* Constants for WT:PTS */ -#define OCD_PTS_DISABLED 0 -#define OCD_PTS_PROGRAM_0B 1 -#define OCD_PTS_PROGRAM_1A 2 -#define OCD_PTS_PROGRAM_1B 3 -#define OCD_PTS_PROGRAM_2A 4 -#define OCD_PTS_PROGRAM_2B 5 -#define OCD_PTS_DATA_3A 6 -#define OCD_PTS_DATA_3B 7 - -/* Constants for DTC:RWT1 */ -#define OCD_RWT1_NO_TRACE 0 -#define OCD_RWT1_DATA_READ 1 -#define OCD_RWT1_DATA_WRITE 2 -#define OCD_RWT1_DATA_READ_WRITE 3 - -/* Constants for DTC:RWT0 */ -#define OCD_RWT0_NO_TRACE 0 -#define OCD_RWT0_DATA_READ 1 -#define OCD_RWT0_DATA_WRITE 2 -#define OCD_RWT0_DATA_READ_WRITE 3 - -/* Constants for BWC0A:BWE */ -#define OCD_BWE_DISABLED 0 -#define OCD_BWE_BREAKPOINT_ENABLED 1 -#define OCD_BWE_WATCHPOINT_ENABLED 3 - -/* Constants for BWC0B:BWE */ -#define OCD_BWE_DISABLED 0 -#define OCD_BWE_BREAKPOINT_ENABLED 1 -#define OCD_BWE_WATCHPOINT_ENABLED 3 - -/* Constants for BWC1A:BWE */ -#define OCD_BWE_DISABLED 0 -#define OCD_BWE_BREAKPOINT_ENABLED 1 -#define OCD_BWE_WATCHPOINT_ENABLED 3 - -/* Constants for BWC1B:BWE */ -#define OCD_BWE_DISABLED 0 -#define OCD_BWE_BREAKPOINT_ENABLED 1 -#define OCD_BWE_WATCHPOINT_ENABLED 3 - -/* Constants for BWC2A:BWE */ -#define OCD_BWE_DISABLED 0 -#define OCD_BWE_BREAKPOINT_ENABLED 1 -#define OCD_BWE_WATCHPOINT_ENABLED 3 - -/* Constants for BWC2B:BWE */ -#define OCD_BWE_DISABLED 0 -#define OCD_BWE_BREAKPOINT_ENABLED 1 -#define OCD_BWE_WATCHPOINT_ENABLED 3 - -/* Constants for BWC3A:SIZE */ -#define OCD_SIZE_BYTE_ACCESS 4 -#define OCD_SIZE_HALFWORD_ACCESS 5 -#define OCD_SIZE_WORD_ACCESS 6 -#define OCD_SIZE_DOUBLE_WORD_ACCESS 7 - -/* Constants for BWC3A:BRW */ -#define OCD_BRW_READ_BREAK 0 -#define OCD_BRW_WRITE_BREAK 1 -#define OCD_BRW_ANY_ACCES_BREAK 2 - -/* Constants for BWC3A:BWE */ -#define OCD_BWE_DISABLED 0 -#define OCD_BWE_BREAKPOINT_ENABLED 1 -#define OCD_BWE_WATCHPOINT_ENABLED 3 - -/* Constants for BWC3B:SIZE */ -#define OCD_SIZE_BYTE_ACCESS 4 -#define OCD_SIZE_HALFWORD_ACCESS 5 -#define OCD_SIZE_WORD_ACCESS 6 -#define OCD_SIZE_DOUBLE_WORD_ACCESS 7 - -/* Constants for BWC3B:BRW */ -#define OCD_BRW_READ_BREAK 0 -#define OCD_BRW_WRITE_BREAK 1 -#define OCD_BRW_ANY_ACCES_BREAK 2 - -/* Constants for BWC3B:BWE */ -#define OCD_BWE_DISABLED 0 -#define OCD_BWE_BREAKPOINT_ENABLED 1 -#define OCD_BWE_WATCHPOINT_ENABLED 3 - -/* Constants for EPC0:RNG */ -#define OCD_RNG_DISABLED 0 -#define OCD_RNG_EXCLUSIVE 1 -#define OCD_RNG_INCLUSIVE 2 - -/* Constants for EPC1:RNG */ -#define OCD_RNG_DISABLED 0 -#define OCD_RNG_EXCLUSIVE 1 -#define OCD_RNG_INCLUSIVE 2 - -/* Constants for EPC2:RNG */ -#define OCD_RNG_DISABLED 0 -#define OCD_RNG_EXCLUSIVE 1 -#define OCD_RNG_INCLUSIVE 2 - -/* Constants for EPC2:DB */ -#define OCD_DB_DISABLED 0 -#define OCD_DB_CHAINED_B 1 -#define OCD_DB_CHAINED_A 2 -#define OCD_DB_AHAINED_A_AND_B 3 - -/* Constants for EPC3:RNG */ -#define OCD_RNG_DISABLED 0 -#define OCD_RNG_EXCLUSIVE 1 -#define OCD_RNG_INCLUSIVE 2 - -#ifndef __ASSEMBLER__ - -/* Register access macros */ -static inline unsigned long __ocd_read(unsigned int reg) -{ - return __builtin_mfdr(reg); -} - -static inline void __ocd_write(unsigned int reg, unsigned long value) -{ - __builtin_mtdr(reg, value); -} - -#define ocd_read(reg) __ocd_read(OCD_##reg) -#define ocd_write(reg, value) __ocd_write(OCD_##reg, value) - -struct task_struct; - -void ocd_enable(struct task_struct *child); -void ocd_disable(struct task_struct *child); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __ASM_AVR32_OCD_H */ diff --git a/include/asm-avr32/page.h b/include/asm-avr32/page.h deleted file mode 100644 index f805d1cb11bc..000000000000 --- a/include/asm-avr32/page.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_PAGE_H -#define __ASM_AVR32_PAGE_H - -#include - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) -#define PTE_MASK PAGE_MASK - -#ifndef __ASSEMBLY__ - -#include - -extern void clear_page(void *to); -extern void copy_page(void *to, void *from); - -#define clear_user_page(page, vaddr, pg) clear_page(page) -#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct page *pgtable_t; - -#define pte_val(x) ((x).pte) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) }) -#define __pgd(x) ((pgd_t) { (x) }) -#define __pgprot(x) ((pgprot_t) { (x) }) - -/* FIXME: These should be removed soon */ -extern unsigned long memory_start, memory_end; - -/* Pure 2^n version of get_order */ -static inline int get_order(unsigned long size) -{ - unsigned lz; - - size = (size - 1) >> PAGE_SHIFT; - asm("clz %0, %1" : "=r"(lz) : "r"(size)); - return 32 - lz; -} - -#endif /* !__ASSEMBLY__ */ - -/* - * The hardware maps the virtual addresses 0x80000000 -> 0x9fffffff - * permanently to the physical addresses 0x00000000 -> 0x1fffffff when - * segmentation is enabled. We want to make use of this in order to - * minimize TLB pressure. - */ -#define PAGE_OFFSET (0x80000000UL) - -/* - * ALSA uses virt_to_page() on DMA pages, which I'm not entirely sure - * is a good idea. Anyway, we can't simply subtract PAGE_OFFSET here - * in that case, so we'll have to mask out the three most significant - * bits of the address instead... - * - * What's the difference between __pa() and virt_to_phys() anyway? - */ -#define __pa(x) PHYSADDR(x) -#define __va(x) ((void *)(P1SEGADDR(x))) - -#define MAP_NR(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> PAGE_SHIFT) - -#define phys_to_page(phys) (pfn_to_page(phys >> PAGE_SHIFT)) -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) - -#ifndef CONFIG_NEED_MULTIPLE_NODES - -#define PHYS_PFN_OFFSET (CONFIG_PHYS_OFFSET >> PAGE_SHIFT) - -#define pfn_to_page(pfn) (mem_map + ((pfn) - PHYS_PFN_OFFSET)) -#define page_to_pfn(page) ((unsigned long)((page) - mem_map) + PHYS_PFN_OFFSET) -#define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr)) -#endif /* CONFIG_NEED_MULTIPLE_NODES */ - -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -/* - * Memory above this physical address will be considered highmem. - */ -#define HIGHMEM_START 0x20000000UL - -#endif /* __ASM_AVR32_PAGE_H */ diff --git a/include/asm-avr32/param.h b/include/asm-avr32/param.h deleted file mode 100644 index 34bc8d4c3b29..000000000000 --- a/include/asm-avr32/param.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef __ASM_AVR32_PARAM_H -#define __ASM_AVR32_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ -# define USER_HZ 100 /* User interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ -#endif - -#ifndef HZ -# define HZ 100 -#endif - -/* TODO: Should be configurable */ -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -# define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 - -#endif /* __ASM_AVR32_PARAM_H */ diff --git a/include/asm-avr32/pci.h b/include/asm-avr32/pci.h deleted file mode 100644 index a32a02372017..000000000000 --- a/include/asm-avr32/pci.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_AVR32_PCI_H__ -#define __ASM_AVR32_PCI_H__ - -/* We don't support PCI yet, but some drivers require this file anyway */ - -#define PCI_DMA_BUS_IS_PHYS (1) - -#include - -#endif /* __ASM_AVR32_PCI_H__ */ diff --git a/include/asm-avr32/percpu.h b/include/asm-avr32/percpu.h deleted file mode 100644 index 69227b4cd0d4..000000000000 --- a/include/asm-avr32/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_PERCPU_H -#define __ASM_AVR32_PERCPU_H - -#include - -#endif /* __ASM_AVR32_PERCPU_H */ diff --git a/include/asm-avr32/pgalloc.h b/include/asm-avr32/pgalloc.h deleted file mode 100644 index 640821323943..000000000000 --- a/include/asm-avr32/pgalloc.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_PGALLOC_H -#define __ASM_AVR32_PGALLOC_H - -#include -#include -#include - -#define QUICK_PGD 0 /* Preserve kernel mappings over free */ -#define QUICK_PT 1 /* Zero on free */ - -static inline void pmd_populate_kernel(struct mm_struct *mm, - pmd_t *pmd, pte_t *pte) -{ - set_pmd(pmd, __pmd((unsigned long)pte)); -} - -static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, - pgtable_t pte) -{ - set_pmd(pmd, __pmd((unsigned long)page_address(pte))); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -static inline void pgd_ctor(void *x) -{ - pgd_t *pgd = x; - - memcpy(pgd + USER_PTRS_PER_PGD, - swapper_pg_dir + USER_PTRS_PER_PGD, - (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); -} - -/* - * Allocate and free page tables - */ -static inline pgd_t *pgd_alloc(struct mm_struct *mm) -{ - return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor); -} - -static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - quicklist_free(QUICK_PGD, NULL, pgd); -} - -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long address) -{ - return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); -} - -static inline pgtable_t pte_alloc_one(struct mm_struct *mm, - unsigned long address) -{ - struct page *page; - void *pg; - - pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); - if (!pg) - return NULL; - - page = virt_to_page(pg); - pgtable_page_ctor(page); - - return page; -} - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - quicklist_free(QUICK_PT, NULL, pte); -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t pte) -{ - pgtable_page_dtor(pte); - quicklist_free_page(QUICK_PT, NULL, pte); -} - -#define __pte_free_tlb(tlb,pte) \ -do { \ - pgtable_page_dtor(pte); \ - tlb_remove_page((tlb), pte); \ -} while (0) - -static inline void check_pgt_cache(void) -{ - quicklist_trim(QUICK_PGD, NULL, 25, 16); - quicklist_trim(QUICK_PT, NULL, 25, 16); -} - -#endif /* __ASM_AVR32_PGALLOC_H */ diff --git a/include/asm-avr32/pgtable-2level.h b/include/asm-avr32/pgtable-2level.h deleted file mode 100644 index 425dd567b5b9..000000000000 --- a/include/asm-avr32/pgtable-2level.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_PGTABLE_2LEVEL_H -#define __ASM_AVR32_PGTABLE_2LEVEL_H - -#include - -/* - * Traditional 2-level paging structure - */ -#define PGDIR_SHIFT 22 -#define PTRS_PER_PGD 1024 - -#define PTRS_PER_PTE 1024 - -#ifndef __ASSEMBLY__ -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - -/* - * Certain architectures need to do special things when PTEs - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -#define set_pte(pteptr, pteval) (*(pteptr) = pteval) -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep, pteval) - -/* - * (pmds are folded into pgds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) - -#define pte_pfn(x) ((unsigned long)(((x).pte >> PAGE_SHIFT))) -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) - -#endif /* !__ASSEMBLY__ */ - -#endif /* __ASM_AVR32_PGTABLE_2LEVEL_H */ diff --git a/include/asm-avr32/pgtable.h b/include/asm-avr32/pgtable.h deleted file mode 100644 index fecdda16f444..000000000000 --- a/include/asm-avr32/pgtable.h +++ /dev/null @@ -1,377 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_PGTABLE_H -#define __ASM_AVR32_PGTABLE_H - -#include - -#ifndef __ASSEMBLY__ -#include - -#endif /* !__ASSEMBLY__ */ - -/* - * Use two-level page tables just as the i386 (without PAE) - */ -#include - -/* - * The following code might need some cleanup when the values are - * final... - */ -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -#ifndef __ASSEMBLY__ -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -extern void paging_init(void); - -/* - * ZERO_PAGE is a global shared page that is always zero: used for - * zero-mapped memory areas etc. - */ -extern struct page *empty_zero_page; -#define ZERO_PAGE(vaddr) (empty_zero_page) - -/* - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8 MiB value just means that there will be a 8 MiB "hole" - * after the uncached physical memory (P2 segment) until the vmalloc - * area starts. That means that any out-of-bounds memory accesses will - * hopefully be caught; we don't know if the end of the P1/P2 segments - * are actually used for anything, but it is anyway safer to let the - * MMU catch these kinds of errors than to rely on the memory bus. - * - * A "hole" of the same size is added to the end of the P3 segment as - * well. It might seem wasteful to use 16 MiB of virtual address space - * on this, but we do have 512 MiB of it... - * - * The vmalloc() routines leave a hole of 4 KiB between each vmalloced - * area for the same reason. - */ -#define VMALLOC_OFFSET (8 * 1024 * 1024) -#define VMALLOC_START (P3SEG + VMALLOC_OFFSET) -#define VMALLOC_END (P4SEG - VMALLOC_OFFSET) -#endif /* !__ASSEMBLY__ */ - -/* - * Page flags. Some of these flags are not directly supported by - * hardware, so we have to emulate them. - */ -#define _TLBEHI_BIT_VALID 9 -#define _TLBEHI_VALID (1 << _TLBEHI_BIT_VALID) - -#define _PAGE_BIT_WT 0 /* W-bit : write-through */ -#define _PAGE_BIT_DIRTY 1 /* D-bit : page changed */ -#define _PAGE_BIT_SZ0 2 /* SZ0-bit : Size of page */ -#define _PAGE_BIT_SZ1 3 /* SZ1-bit : Size of page */ -#define _PAGE_BIT_EXECUTE 4 /* X-bit : execute access allowed */ -#define _PAGE_BIT_RW 5 /* AP0-bit : write access allowed */ -#define _PAGE_BIT_USER 6 /* AP1-bit : user space access allowed */ -#define _PAGE_BIT_BUFFER 7 /* B-bit : bufferable */ -#define _PAGE_BIT_GLOBAL 8 /* G-bit : global (ignore ASID) */ -#define _PAGE_BIT_CACHABLE 9 /* C-bit : cachable */ - -/* If we drop support for 1K pages, we get two extra bits */ -#define _PAGE_BIT_PRESENT 10 -#define _PAGE_BIT_ACCESSED 11 /* software: page was accessed */ - -/* The following flags are only valid when !PRESENT */ -#define _PAGE_BIT_FILE 0 /* software: pagecache or swap? */ - -#define _PAGE_WT (1 << _PAGE_BIT_WT) -#define _PAGE_DIRTY (1 << _PAGE_BIT_DIRTY) -#define _PAGE_EXECUTE (1 << _PAGE_BIT_EXECUTE) -#define _PAGE_RW (1 << _PAGE_BIT_RW) -#define _PAGE_USER (1 << _PAGE_BIT_USER) -#define _PAGE_BUFFER (1 << _PAGE_BIT_BUFFER) -#define _PAGE_GLOBAL (1 << _PAGE_BIT_GLOBAL) -#define _PAGE_CACHABLE (1 << _PAGE_BIT_CACHABLE) - -/* Software flags */ -#define _PAGE_ACCESSED (1 << _PAGE_BIT_ACCESSED) -#define _PAGE_PRESENT (1 << _PAGE_BIT_PRESENT) -#define _PAGE_FILE (1 << _PAGE_BIT_FILE) - -/* - * Page types, i.e. sizes. _PAGE_TYPE_NONE corresponds to what is - * usually called _PAGE_PROTNONE on other architectures. - * - * XXX: Find out if _PAGE_PROTNONE is equivalent with !_PAGE_USER. If - * so, we can encode all possible page sizes (although we can't really - * support 1K pages anyway due to the _PAGE_PRESENT and _PAGE_ACCESSED - * bits) - * - */ -#define _PAGE_TYPE_MASK ((1 << _PAGE_BIT_SZ0) | (1 << _PAGE_BIT_SZ1)) -#define _PAGE_TYPE_NONE (0 << _PAGE_BIT_SZ0) -#define _PAGE_TYPE_SMALL (1 << _PAGE_BIT_SZ0) -#define _PAGE_TYPE_MEDIUM (2 << _PAGE_BIT_SZ0) -#define _PAGE_TYPE_LARGE (3 << _PAGE_BIT_SZ0) - -/* - * Mask which drop software flags. We currently can't handle more than - * 512 MiB of physical memory, so we can use bits 29-31 for other - * stuff. With a fixed 4K page size, we can use bits 10-11 as well as - * bits 2-3 (SZ) - */ -#define _PAGE_FLAGS_HARDWARE_MASK 0xfffff3ff - -#define _PAGE_FLAGS_CACHE_MASK (_PAGE_CACHABLE | _PAGE_BUFFER | _PAGE_WT) - -/* Flags that may be modified by software */ -#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY \ - | _PAGE_FLAGS_CACHE_MASK) - -#define _PAGE_FLAGS_READ (_PAGE_CACHABLE | _PAGE_BUFFER) -#define _PAGE_FLAGS_WRITE (_PAGE_FLAGS_READ | _PAGE_RW | _PAGE_DIRTY) - -#define _PAGE_NORMAL(x) __pgprot((x) | _PAGE_PRESENT | _PAGE_TYPE_SMALL \ - | _PAGE_ACCESSED) - -#define PAGE_NONE (_PAGE_ACCESSED | _PAGE_TYPE_NONE) -#define PAGE_READ (_PAGE_FLAGS_READ | _PAGE_USER) -#define PAGE_EXEC (_PAGE_FLAGS_READ | _PAGE_EXECUTE | _PAGE_USER) -#define PAGE_WRITE (_PAGE_FLAGS_WRITE | _PAGE_USER) -#define PAGE_KERNEL _PAGE_NORMAL(_PAGE_FLAGS_WRITE | _PAGE_EXECUTE | _PAGE_GLOBAL) -#define PAGE_KERNEL_RO _PAGE_NORMAL(_PAGE_FLAGS_READ | _PAGE_EXECUTE | _PAGE_GLOBAL) - -#define _PAGE_P(x) _PAGE_NORMAL((x) & ~(_PAGE_RW | _PAGE_DIRTY)) -#define _PAGE_S(x) _PAGE_NORMAL(x) - -#define PAGE_COPY _PAGE_P(PAGE_WRITE | PAGE_READ) -#define PAGE_SHARED _PAGE_S(PAGE_WRITE | PAGE_READ) - -#ifndef __ASSEMBLY__ -/* - * The hardware supports flags for write- and execute access. Read is - * always allowed if the page is loaded into the TLB, so the "-w-", - * "--x" and "-wx" mappings are implemented as "rw-", "r-x" and "rwx", - * respectively. - * - * The "---" case is handled by software; the page will simply not be - * loaded into the TLB if the page type is _PAGE_TYPE_NONE. - */ - -#define __P000 __pgprot(PAGE_NONE) -#define __P001 _PAGE_P(PAGE_READ) -#define __P010 _PAGE_P(PAGE_WRITE) -#define __P011 _PAGE_P(PAGE_WRITE | PAGE_READ) -#define __P100 _PAGE_P(PAGE_EXEC) -#define __P101 _PAGE_P(PAGE_EXEC | PAGE_READ) -#define __P110 _PAGE_P(PAGE_EXEC | PAGE_WRITE) -#define __P111 _PAGE_P(PAGE_EXEC | PAGE_WRITE | PAGE_READ) - -#define __S000 __pgprot(PAGE_NONE) -#define __S001 _PAGE_S(PAGE_READ) -#define __S010 _PAGE_S(PAGE_WRITE) -#define __S011 _PAGE_S(PAGE_WRITE | PAGE_READ) -#define __S100 _PAGE_S(PAGE_EXEC) -#define __S101 _PAGE_S(PAGE_EXEC | PAGE_READ) -#define __S110 _PAGE_S(PAGE_EXEC | PAGE_WRITE) -#define __S111 _PAGE_S(PAGE_EXEC | PAGE_WRITE | PAGE_READ) - -#define pte_none(x) (!pte_val(x)) -#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) - -#define pte_clear(mm,addr,xp) \ - do { \ - set_pte_at(mm, addr, xp, __pte(0)); \ - } while (0) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -static inline int pte_write(pte_t pte) -{ - return pte_val(pte) & _PAGE_RW; -} -static inline int pte_dirty(pte_t pte) -{ - return pte_val(pte) & _PAGE_DIRTY; -} -static inline int pte_young(pte_t pte) -{ - return pte_val(pte) & _PAGE_ACCESSED; -} -static inline int pte_special(pte_t pte) -{ - return 0; -} - -/* - * The following only work if pte_present() is not true. - */ -static inline int pte_file(pte_t pte) -{ - return pte_val(pte) & _PAGE_FILE; -} - -/* Mutator functions for PTE bits */ -static inline pte_t pte_wrprotect(pte_t pte) -{ - set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_RW)); - return pte; -} -static inline pte_t pte_mkclean(pte_t pte) -{ - set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); - return pte; -} -static inline pte_t pte_mkold(pte_t pte) -{ - set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); - return pte; -} -static inline pte_t pte_mkwrite(pte_t pte) -{ - set_pte(&pte, __pte(pte_val(pte) | _PAGE_RW)); - return pte; -} -static inline pte_t pte_mkdirty(pte_t pte) -{ - set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); - return pte; -} -static inline pte_t pte_mkyoung(pte_t pte) -{ - set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); - return pte; -} -static inline pte_t pte_mkspecial(pte_t pte) -{ - return pte; -} - -#define pmd_none(x) (!pmd_val(x)) -#define pmd_present(x) (pmd_val(x)) - -static inline void pmd_clear(pmd_t *pmdp) -{ - set_pmd(pmdp, __pmd(0)); -} - -#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK) - -/* - * Permanent address of a page. We don't support highmem, so this is - * trivial. - */ -#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) -#define pte_page(x) (pfn_to_page(pte_pfn(x))) - -/* - * Mark the prot value as uncacheable and unbufferable - */ -#define pgprot_noncached(prot) \ - __pgprot(pgprot_val(prot) & ~(_PAGE_BUFFER | _PAGE_CACHABLE)) - -/* - * Mark the prot value as uncacheable but bufferable - */ -#define pgprot_writecombine(prot) \ - __pgprot((pgprot_val(prot) & ~_PAGE_CACHABLE) | _PAGE_BUFFER) - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - * - * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) - */ -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) - | pgprot_val(newprot))); - return pte; -} - -#define page_pte(page) page_pte_prot(page, __pgprot(0)) - -#define pmd_page_vaddr(pmd) pmd_val(pmd) -#define pmd_page(pmd) (virt_to_page(pmd_val(pmd))) - -/* to find an entry in a page-table-directory. */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) \ - & (PTRS_PER_PGD - 1)) -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) - -/* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* Find an entry in the third-level page table.. */ -#define pte_index(address) \ - ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset(dir, address) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) -#define pte_offset_kernel(dir, address) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) -#define pte_offset_map(dir, address) pte_offset_kernel(dir, address) -#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address) -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) - -struct vm_area_struct; -extern void update_mmu_cache(struct vm_area_struct * vma, - unsigned long address, pte_t pte); - -/* - * Encode and decode a swap entry - * - * Constraints: - * _PAGE_FILE at bit 0 - * _PAGE_TYPE_* at bits 2-3 (for emulating _PAGE_PROTNONE) - * _PAGE_PRESENT at bit 10 - * - * We encode the type into bits 4-9 and offset into bits 11-31. This - * gives us a 21 bits offset, or 2**21 * 4K = 8G usable swap space per - * device, and 64 possible types. - * - * NOTE: We should set ZEROs at the position of _PAGE_PRESENT - * and _PAGE_PROTNONE bits - */ -#define __swp_type(x) (((x).val >> 4) & 0x3f) -#define __swp_offset(x) ((x).val >> 11) -#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 4) | ((offset) << 11) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -/* - * Encode and decode a nonlinear file mapping entry. We have to - * preserve _PAGE_FILE and _PAGE_PRESENT here. _PAGE_TYPE_* isn't - * necessary, since _PAGE_FILE implies !_PAGE_PROTNONE (?) - */ -#define PTE_FILE_MAX_BITS 30 -#define pte_to_pgoff(pte) (((pte_val(pte) >> 1) & 0x1ff) \ - | ((pte_val(pte) >> 11) << 9)) -#define pgoff_to_pte(off) ((pte_t) { ((((off) & 0x1ff) << 1) \ - | (((off) >> 9) << 11) \ - | _PAGE_FILE) }) - -typedef pte_t *pte_addr_t; - -#define kern_addr_valid(addr) (1) - -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) - -/* No page table caches to initialize (?) */ -#define pgtable_cache_init() do { } while(0) - -#include - -#endif /* !__ASSEMBLY__ */ - -#endif /* __ASM_AVR32_PGTABLE_H */ diff --git a/include/asm-avr32/poll.h b/include/asm-avr32/poll.h deleted file mode 100644 index c98509d3149e..000000000000 --- a/include/asm-avr32/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-avr32/posix_types.h b/include/asm-avr32/posix_types.h deleted file mode 100644 index fe0c0c014389..000000000000 --- a/include/asm-avr32/posix_types.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_POSIX_TYPES_H -#define __ASM_AVR32_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned int __kernel_uid_t; -typedef unsigned int __kernel_gid_t; -typedef unsigned long __kernel_size_t; -typedef long __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#if defined(__KERNEL__) - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); -} - - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *__p) -{ - unsigned long *__tmp = __p->fds_bits; - int __i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - __tmp[ 8] = 0; __tmp[ 9] = 0; - __tmp[10] = 0; __tmp[11] = 0; - __tmp[12] = 0; __tmp[13] = 0; - __tmp[14] = 0; __tmp[15] = 0; - return; - - case 8: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - return; - - case 4: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - return; - } - } - __i = __FDSET_LONGS; - while (__i) { - __i--; - *__tmp = 0; - __tmp++; - } -} - -#endif /* defined(__KERNEL__) */ - -#endif /* __ASM_AVR32_POSIX_TYPES_H */ diff --git a/include/asm-avr32/processor.h b/include/asm-avr32/processor.h deleted file mode 100644 index 49a88f5a9d2f..000000000000 --- a/include/asm-avr32/processor.h +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_PROCESSOR_H -#define __ASM_AVR32_PROCESSOR_H - -#include -#include - -#define TASK_SIZE 0x80000000 - -#ifdef __KERNEL__ -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP -#endif - -#ifndef __ASSEMBLY__ - -static inline void *current_text_addr(void) -{ - register void *pc asm("pc"); - return pc; -} - -enum arch_type { - ARCH_AVR32A, - ARCH_AVR32B, - ARCH_MAX -}; - -enum cpu_type { - CPU_MORGAN, - CPU_AT32AP, - CPU_MAX -}; - -enum tlb_config { - TLB_NONE, - TLB_SPLIT, - TLB_UNIFIED, - TLB_INVALID -}; - -#define AVR32_FEATURE_RMW (1 << 0) -#define AVR32_FEATURE_DSP (1 << 1) -#define AVR32_FEATURE_SIMD (1 << 2) -#define AVR32_FEATURE_OCD (1 << 3) -#define AVR32_FEATURE_PCTR (1 << 4) -#define AVR32_FEATURE_JAVA (1 << 5) -#define AVR32_FEATURE_FPU (1 << 6) - -struct avr32_cpuinfo { - struct clk *clk; - unsigned long loops_per_jiffy; - enum arch_type arch_type; - enum cpu_type cpu_type; - unsigned short arch_revision; - unsigned short cpu_revision; - enum tlb_config tlb_config; - unsigned long features; - u32 device_id; - - struct cache_info icache; - struct cache_info dcache; -}; - -static inline unsigned int avr32_get_manufacturer_id(struct avr32_cpuinfo *cpu) -{ - return (cpu->device_id >> 1) & 0x7f; -} -static inline unsigned int avr32_get_product_number(struct avr32_cpuinfo *cpu) -{ - return (cpu->device_id >> 12) & 0xffff; -} -static inline unsigned int avr32_get_chip_revision(struct avr32_cpuinfo *cpu) -{ - return (cpu->device_id >> 28) & 0x0f; -} - -extern struct avr32_cpuinfo boot_cpu_data; - -#ifdef CONFIG_SMP -extern struct avr32_cpuinfo cpu_data[]; -#define current_cpu_data cpu_data[smp_processor_id()] -#else -#define cpu_data (&boot_cpu_data) -#define current_cpu_data boot_cpu_data -#endif - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's - */ -#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3)) - -#define cpu_relax() barrier() -#define cpu_sync_pipeline() asm volatile("sub pc, -2" : : : "memory") - -struct cpu_context { - unsigned long sr; - unsigned long pc; - unsigned long ksp; /* Kernel stack pointer */ - unsigned long r7; - unsigned long r6; - unsigned long r5; - unsigned long r4; - unsigned long r3; - unsigned long r2; - unsigned long r1; - unsigned long r0; -}; - -/* This struct contains the CPU context as stored by switch_to() */ -struct thread_struct { - struct cpu_context cpu_context; - unsigned long single_step_addr; - u16 single_step_insn; -}; - -#define INIT_THREAD { \ - .cpu_context = { \ - .ksp = sizeof(init_stack) + (long)&init_stack, \ - }, \ -} - -/* - * Do necessary setup to start up a newly executed thread. - */ -#define start_thread(regs, new_pc, new_sp) \ - do { \ - set_fs(USER_DS); \ - memset(regs, 0, sizeof(*regs)); \ - regs->sr = MODE_USER; \ - regs->pc = new_pc & ~1; \ - regs->sp = new_sp; \ - } while(0) - -struct task_struct; - -/* Free all resources held by a thread */ -extern void release_thread(struct task_struct *); - -/* Create a kernel thread without removing it from tasklists */ -extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while(0) - -/* Return saved PC of a blocked thread */ -#define thread_saved_pc(tsk) ((tsk)->thread.cpu_context.pc) - -struct pt_regs; -extern unsigned long get_wchan(struct task_struct *p); -extern void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl); -extern void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp, - struct pt_regs *regs, const char *log_lvl); - -#define task_pt_regs(p) \ - ((struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1) - -#define KSTK_EIP(tsk) ((tsk)->thread.cpu_context.pc) -#define KSTK_ESP(tsk) ((tsk)->thread.cpu_context.ksp) - -#define ARCH_HAS_PREFETCH - -static inline void prefetch(const void *x) -{ - const char *c = x; - asm volatile("pref %0" : : "r"(c)); -} -#define PREFETCH_STRIDE L1_CACHE_BYTES - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_AVR32_PROCESSOR_H */ diff --git a/include/asm-avr32/ptrace.h b/include/asm-avr32/ptrace.h deleted file mode 100644 index 9e2d44f4e0fe..000000000000 --- a/include/asm-avr32/ptrace.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_PTRACE_H -#define __ASM_AVR32_PTRACE_H - -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 - -/* - * Status Register bits - */ -#define SR_H 0x20000000 -#define SR_J 0x10000000 -#define SR_DM 0x08000000 -#define SR_D 0x04000000 -#define MODE_NMI 0x01c00000 -#define MODE_EXCEPTION 0x01800000 -#define MODE_INT3 0x01400000 -#define MODE_INT2 0x01000000 -#define MODE_INT1 0x00c00000 -#define MODE_INT0 0x00800000 -#define MODE_SUPERVISOR 0x00400000 -#define MODE_USER 0x00000000 -#define MODE_MASK 0x01c00000 -#define SR_EM 0x00200000 -#define SR_I3M 0x00100000 -#define SR_I2M 0x00080000 -#define SR_I1M 0x00040000 -#define SR_I0M 0x00020000 -#define SR_GM 0x00010000 - -#define SR_H_BIT 29 -#define SR_J_BIT 28 -#define SR_DM_BIT 27 -#define SR_D_BIT 26 -#define MODE_SHIFT 22 -#define SR_EM_BIT 21 -#define SR_I3M_BIT 20 -#define SR_I2M_BIT 19 -#define SR_I1M_BIT 18 -#define SR_I0M_BIT 17 -#define SR_GM_BIT 16 - -/* The user-visible part */ -#define SR_L 0x00000020 -#define SR_Q 0x00000010 -#define SR_V 0x00000008 -#define SR_N 0x00000004 -#define SR_Z 0x00000002 -#define SR_C 0x00000001 - -#define SR_L_BIT 5 -#define SR_Q_BIT 4 -#define SR_V_BIT 3 -#define SR_N_BIT 2 -#define SR_Z_BIT 1 -#define SR_C_BIT 0 - -/* - * The order is defined by the stmts instruction. r0 is stored first, - * so it gets the highest address. - * - * Registers 0-12 are general-purpose registers (r12 is normally used for - * the function return value). - * Register 13 is the stack pointer - * Register 14 is the link register - * Register 15 is the program counter (retrieved from the RAR sysreg) - */ -#define FRAME_SIZE_FULL 72 -#define REG_R12_ORIG 68 -#define REG_R0 64 -#define REG_R1 60 -#define REG_R2 56 -#define REG_R3 52 -#define REG_R4 48 -#define REG_R5 44 -#define REG_R6 40 -#define REG_R7 36 -#define REG_R8 32 -#define REG_R9 28 -#define REG_R10 24 -#define REG_R11 20 -#define REG_R12 16 -#define REG_SP 12 -#define REG_LR 8 - -#define FRAME_SIZE_MIN 8 -#define REG_PC 4 -#define REG_SR 0 - -#ifndef __ASSEMBLY__ -struct pt_regs { - /* These are always saved */ - unsigned long sr; - unsigned long pc; - - /* These are sometimes saved */ - unsigned long lr; - unsigned long sp; - unsigned long r12; - unsigned long r11; - unsigned long r10; - unsigned long r9; - unsigned long r8; - unsigned long r7; - unsigned long r6; - unsigned long r5; - unsigned long r4; - unsigned long r3; - unsigned long r2; - unsigned long r1; - unsigned long r0; - - /* Only saved on system call */ - unsigned long r12_orig; -}; - -#ifdef __KERNEL__ - -#include - -#define arch_ptrace_attach(child) ocd_enable(child) - -#define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER) -#define instruction_pointer(regs) ((regs)->pc) -#define profile_pc(regs) instruction_pointer(regs) - -extern void show_regs (struct pt_regs *); - -static __inline__ int valid_user_regs(struct pt_regs *regs) -{ - /* - * Some of the Java bits might be acceptable if/when we - * implement some support for that stuff... - */ - if ((regs->sr & 0xffff0000) == 0) - return 1; - - /* - * Force status register flags to be sane and report this - * illegal behaviour... - */ - regs->sr &= 0x0000ffff; - return 0; -} - - -#endif /* __KERNEL__ */ - -#endif /* ! __ASSEMBLY__ */ - -#endif /* __ASM_AVR32_PTRACE_H */ diff --git a/include/asm-avr32/resource.h b/include/asm-avr32/resource.h deleted file mode 100644 index c6dd101472b1..000000000000 --- a/include/asm-avr32/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_RESOURCE_H -#define __ASM_AVR32_RESOURCE_H - -#include - -#endif /* __ASM_AVR32_RESOURCE_H */ diff --git a/include/asm-avr32/scatterlist.h b/include/asm-avr32/scatterlist.h deleted file mode 100644 index 377320e3bd17..000000000000 --- a/include/asm-avr32/scatterlist.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef __ASM_AVR32_SCATTERLIST_H -#define __ASM_AVR32_SCATTERLIST_H - -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; - -/* These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#define ISA_DMA_THRESHOLD (0xffffffff) - -#endif /* __ASM_AVR32_SCATTERLIST_H */ diff --git a/include/asm-avr32/sections.h b/include/asm-avr32/sections.h deleted file mode 100644 index aa14252e4181..000000000000 --- a/include/asm-avr32/sections.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_SECTIONS_H -#define __ASM_AVR32_SECTIONS_H - -#include - -#endif /* __ASM_AVR32_SECTIONS_H */ diff --git a/include/asm-avr32/sembuf.h b/include/asm-avr32/sembuf.h deleted file mode 100644 index e472216e0c97..000000000000 --- a/include/asm-avr32/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef __ASM_AVR32_SEMBUF_H -#define __ASM_AVR32_SEMBUF_H - -/* -* The semid64_ds structure for AVR32 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* __ASM_AVR32_SEMBUF_H */ diff --git a/include/asm-avr32/serial.h b/include/asm-avr32/serial.h deleted file mode 100644 index 5ecaebc22b02..000000000000 --- a/include/asm-avr32/serial.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_SERIAL_H -#define _ASM_SERIAL_H - -/* - * This assumes you have a 1.8432 MHz clock for your UART. - * - * It'd be nice if someone built a serial card with a 24.576 MHz - * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. - */ -#define BASE_BAUD (1843200 / 16) - -#endif /* _ASM_SERIAL_H */ diff --git a/include/asm-avr32/setup.h b/include/asm-avr32/setup.h deleted file mode 100644 index ff5b7cf6be4d..000000000000 --- a/include/asm-avr32/setup.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * Based on linux/include/asm-arm/setup.h - * Copyright (C) 1997-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_SETUP_H__ -#define __ASM_AVR32_SETUP_H__ - -#define COMMAND_LINE_SIZE 256 - -#ifdef __KERNEL__ - -/* Magic number indicating that a tag table is present */ -#define ATAG_MAGIC 0xa2a25441 - -#ifndef __ASSEMBLY__ - -/* - * Generic memory range, used by several tags. - * - * addr is always physical. - * size is measured in bytes. - * next is for use by the OS, e.g. for grouping regions into - * linked lists. - */ -struct tag_mem_range { - u32 addr; - u32 size; - struct tag_mem_range * next; -}; - -/* The list ends with an ATAG_NONE node. */ -#define ATAG_NONE 0x00000000 - -struct tag_header { - u32 size; - u32 tag; -}; - -/* The list must start with an ATAG_CORE node */ -#define ATAG_CORE 0x54410001 - -struct tag_core { - u32 flags; - u32 pagesize; - u32 rootdev; -}; - -/* it is allowed to have multiple ATAG_MEM nodes */ -#define ATAG_MEM 0x54410002 -/* ATAG_MEM uses tag_mem_range */ - -/* command line: \0 terminated string */ -#define ATAG_CMDLINE 0x54410003 - -struct tag_cmdline { - char cmdline[1]; /* this is the minimum size */ -}; - -/* Ramdisk image (may be compressed) */ -#define ATAG_RDIMG 0x54410004 -/* ATAG_RDIMG uses tag_mem_range */ - -/* Information about various clocks present in the system */ -#define ATAG_CLOCK 0x54410005 - -struct tag_clock { - u32 clock_id; /* Which clock are we talking about? */ - u32 clock_flags; /* Special features */ - u64 clock_hz; /* Clock speed in Hz */ -}; - -/* The clock types we know about */ -#define CLOCK_BOOTCPU 0 - -/* Memory reserved for the system (e.g. the bootloader) */ -#define ATAG_RSVD_MEM 0x54410006 -/* ATAG_RSVD_MEM uses tag_mem_range */ - -/* Ethernet information */ - -#define ATAG_ETHERNET 0x54410007 - -struct tag_ethernet { - u8 mac_index; - u8 mii_phy_addr; - u8 hw_address[6]; -}; - -#define ETH_INVALID_PHY 0xff - -struct tag { - struct tag_header hdr; - union { - struct tag_core core; - struct tag_mem_range mem_range; - struct tag_cmdline cmdline; - struct tag_clock clock; - struct tag_ethernet ethernet; - } u; -}; - -struct tagtable { - u32 tag; - int (*parse)(struct tag *); -}; - -#define __tag __used __attribute__((__section__(".taglist.init"))) -#define __tagtable(tag, fn) \ - static struct tagtable __tagtable_##fn __tag = { tag, fn } - -#define tag_member_present(tag,member) \ - ((unsigned long)(&((struct tag *)0L)->member + 1) \ - <= (tag)->hdr.size * 4) - -#define tag_next(t) ((struct tag *)((u32 *)(t) + (t)->hdr.size)) -#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2) - -#define for_each_tag(t,base) \ - for (t = base; t->hdr.size; t = tag_next(t)) - -extern struct tag *bootloader_tags; - -extern resource_size_t fbmem_start; -extern resource_size_t fbmem_size; - -void setup_processor(void); - -#endif /* !__ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* __ASM_AVR32_SETUP_H__ */ diff --git a/include/asm-avr32/shmbuf.h b/include/asm-avr32/shmbuf.h deleted file mode 100644 index c62fba41739a..000000000000 --- a/include/asm-avr32/shmbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef __ASM_AVR32_SHMBUF_H -#define __ASM_AVR32_SHMBUF_H - -/* - * The shmid64_ds structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* __ASM_AVR32_SHMBUF_H */ diff --git a/include/asm-avr32/shmparam.h b/include/asm-avr32/shmparam.h deleted file mode 100644 index 3681266c77f7..000000000000 --- a/include/asm-avr32/shmparam.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_SHMPARAM_H -#define __ASM_AVR32_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* __ASM_AVR32_SHMPARAM_H */ diff --git a/include/asm-avr32/sigcontext.h b/include/asm-avr32/sigcontext.h deleted file mode 100644 index e04062b5f39f..000000000000 --- a/include/asm-avr32/sigcontext.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_SIGCONTEXT_H -#define __ASM_AVR32_SIGCONTEXT_H - -struct sigcontext { - unsigned long oldmask; - - /* CPU registers */ - unsigned long sr; - unsigned long pc; - unsigned long lr; - unsigned long sp; - unsigned long r12; - unsigned long r11; - unsigned long r10; - unsigned long r9; - unsigned long r8; - unsigned long r7; - unsigned long r6; - unsigned long r5; - unsigned long r4; - unsigned long r3; - unsigned long r2; - unsigned long r1; - unsigned long r0; -}; - -#endif /* __ASM_AVR32_SIGCONTEXT_H */ diff --git a/include/asm-avr32/siginfo.h b/include/asm-avr32/siginfo.h deleted file mode 100644 index 5ee93f40a8a8..000000000000 --- a/include/asm-avr32/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _AVR32_SIGINFO_H -#define _AVR32_SIGINFO_H - -#include - -#endif diff --git a/include/asm-avr32/signal.h b/include/asm-avr32/signal.h deleted file mode 100644 index caffefeeba1f..000000000000 --- a/include/asm-avr32/signal.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_SIGNAL_H -#define __ASM_AVR32_SIGNAL_H - -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX (_NSIG-1) - -/* - * SA_FLAGS values: - * - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_SIGINFO deliver the signal with SIGINFO structs - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NODEFER prevents the current signal from being masked in the handler. - * SA_RESETHAND clears the handler when the signal is delivered. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_RESTORER 0x04000000 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - __sigrestore_t sa_restorer; -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ - -#include -#undef __HAVE_ARCH_SIG_BITOPS - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-avr32/socket.h b/include/asm-avr32/socket.h deleted file mode 100644 index 35863f260929..000000000000 --- a/include/asm-avr32/socket.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef __ASM_AVR32_SOCKET_H -#define __ASM_AVR32_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#endif /* __ASM_AVR32_SOCKET_H */ diff --git a/include/asm-avr32/sockios.h b/include/asm-avr32/sockios.h deleted file mode 100644 index 0802d742f97d..000000000000 --- a/include/asm-avr32/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_AVR32_SOCKIOS_H -#define __ASM_AVR32_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* __ASM_AVR32_SOCKIOS_H */ diff --git a/include/asm-avr32/stat.h b/include/asm-avr32/stat.h deleted file mode 100644 index e72881e10230..000000000000 --- a/include/asm-avr32/stat.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_STAT_H -#define __ASM_AVR32_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned long st_rdev; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -#define STAT_HAVE_NSEC 1 - -struct stat64 { - unsigned long long st_dev; - - unsigned long long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - - long long st_size; - unsigned long __pad1; /* align 64-bit st_blocks */ - unsigned long st_blksize; - - unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __ASM_AVR32_STAT_H */ diff --git a/include/asm-avr32/statfs.h b/include/asm-avr32/statfs.h deleted file mode 100644 index 2961bd18c50e..000000000000 --- a/include/asm-avr32/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_STATFS_H -#define __ASM_AVR32_STATFS_H - -#include - -#endif /* __ASM_AVR32_STATFS_H */ diff --git a/include/asm-avr32/string.h b/include/asm-avr32/string.h deleted file mode 100644 index c91a623cd585..000000000000 --- a/include/asm-avr32/string.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_STRING_H -#define __ASM_AVR32_STRING_H - -#define __HAVE_ARCH_MEMSET -extern void *memset(void *b, int c, size_t len); - -#define __HAVE_ARCH_MEMCPY -extern void *memcpy(void *to, const void *from, size_t len); - -#endif /* __ASM_AVR32_STRING_H */ diff --git a/include/asm-avr32/sysreg.h b/include/asm-avr32/sysreg.h deleted file mode 100644 index d4e0950170ca..000000000000 --- a/include/asm-avr32/sysreg.h +++ /dev/null @@ -1,291 +0,0 @@ -/* - * AVR32 System Registers - * - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_SYSREG_H -#define __ASM_AVR32_SYSREG_H - -/* sysreg register offsets */ -#define SYSREG_SR 0x0000 -#define SYSREG_EVBA 0x0004 -#define SYSREG_ACBA 0x0008 -#define SYSREG_CPUCR 0x000c -#define SYSREG_ECR 0x0010 -#define SYSREG_RSR_SUP 0x0014 -#define SYSREG_RSR_INT0 0x0018 -#define SYSREG_RSR_INT1 0x001c -#define SYSREG_RSR_INT2 0x0020 -#define SYSREG_RSR_INT3 0x0024 -#define SYSREG_RSR_EX 0x0028 -#define SYSREG_RSR_NMI 0x002c -#define SYSREG_RSR_DBG 0x0030 -#define SYSREG_RAR_SUP 0x0034 -#define SYSREG_RAR_INT0 0x0038 -#define SYSREG_RAR_INT1 0x003c -#define SYSREG_RAR_INT2 0x0040 -#define SYSREG_RAR_INT3 0x0044 -#define SYSREG_RAR_EX 0x0048 -#define SYSREG_RAR_NMI 0x004c -#define SYSREG_RAR_DBG 0x0050 -#define SYSREG_JECR 0x0054 -#define SYSREG_JOSP 0x0058 -#define SYSREG_JAVA_LV0 0x005c -#define SYSREG_JAVA_LV1 0x0060 -#define SYSREG_JAVA_LV2 0x0064 -#define SYSREG_JAVA_LV3 0x0068 -#define SYSREG_JAVA_LV4 0x006c -#define SYSREG_JAVA_LV5 0x0070 -#define SYSREG_JAVA_LV6 0x0074 -#define SYSREG_JAVA_LV7 0x0078 -#define SYSREG_JTBA 0x007c -#define SYSREG_JBCR 0x0080 -#define SYSREG_CONFIG0 0x0100 -#define SYSREG_CONFIG1 0x0104 -#define SYSREG_COUNT 0x0108 -#define SYSREG_COMPARE 0x010c -#define SYSREG_TLBEHI 0x0110 -#define SYSREG_TLBELO 0x0114 -#define SYSREG_PTBR 0x0118 -#define SYSREG_TLBEAR 0x011c -#define SYSREG_MMUCR 0x0120 -#define SYSREG_TLBARLO 0x0124 -#define SYSREG_TLBARHI 0x0128 -#define SYSREG_PCCNT 0x012c -#define SYSREG_PCNT0 0x0130 -#define SYSREG_PCNT1 0x0134 -#define SYSREG_PCCR 0x0138 -#define SYSREG_BEAR 0x013c -#define SYSREG_SABAL 0x0300 -#define SYSREG_SABAH 0x0304 -#define SYSREG_SABD 0x0308 - -/* Bitfields in SR */ -#define SYSREG_SR_C_OFFSET 0 -#define SYSREG_SR_C_SIZE 1 -#define SYSREG_Z_OFFSET 1 -#define SYSREG_Z_SIZE 1 -#define SYSREG_SR_N_OFFSET 2 -#define SYSREG_SR_N_SIZE 1 -#define SYSREG_SR_V_OFFSET 3 -#define SYSREG_SR_V_SIZE 1 -#define SYSREG_Q_OFFSET 4 -#define SYSREG_Q_SIZE 1 -#define SYSREG_L_OFFSET 5 -#define SYSREG_L_SIZE 1 -#define SYSREG_T_OFFSET 14 -#define SYSREG_T_SIZE 1 -#define SYSREG_SR_R_OFFSET 15 -#define SYSREG_SR_R_SIZE 1 -#define SYSREG_GM_OFFSET 16 -#define SYSREG_GM_SIZE 1 -#define SYSREG_I0M_OFFSET 17 -#define SYSREG_I0M_SIZE 1 -#define SYSREG_I1M_OFFSET 18 -#define SYSREG_I1M_SIZE 1 -#define SYSREG_I2M_OFFSET 19 -#define SYSREG_I2M_SIZE 1 -#define SYSREG_I3M_OFFSET 20 -#define SYSREG_I3M_SIZE 1 -#define SYSREG_EM_OFFSET 21 -#define SYSREG_EM_SIZE 1 -#define SYSREG_MODE_OFFSET 22 -#define SYSREG_MODE_SIZE 3 -#define SYSREG_M0_OFFSET 22 -#define SYSREG_M0_SIZE 1 -#define SYSREG_M1_OFFSET 23 -#define SYSREG_M1_SIZE 1 -#define SYSREG_M2_OFFSET 24 -#define SYSREG_M2_SIZE 1 -#define SYSREG_SR_D_OFFSET 26 -#define SYSREG_SR_D_SIZE 1 -#define SYSREG_DM_OFFSET 27 -#define SYSREG_DM_SIZE 1 -#define SYSREG_SR_J_OFFSET 28 -#define SYSREG_SR_J_SIZE 1 -#define SYSREG_H_OFFSET 29 -#define SYSREG_H_SIZE 1 - -/* Bitfields in CPUCR */ -#define SYSREG_BI_OFFSET 0 -#define SYSREG_BI_SIZE 1 -#define SYSREG_BE_OFFSET 1 -#define SYSREG_BE_SIZE 1 -#define SYSREG_FE_OFFSET 2 -#define SYSREG_FE_SIZE 1 -#define SYSREG_RE_OFFSET 3 -#define SYSREG_RE_SIZE 1 -#define SYSREG_IBE_OFFSET 4 -#define SYSREG_IBE_SIZE 1 -#define SYSREG_IEE_OFFSET 5 -#define SYSREG_IEE_SIZE 1 - -/* Bitfields in CONFIG0 */ -#define SYSREG_CONFIG0_R_OFFSET 0 -#define SYSREG_CONFIG0_R_SIZE 1 -#define SYSREG_CONFIG0_D_OFFSET 1 -#define SYSREG_CONFIG0_D_SIZE 1 -#define SYSREG_CONFIG0_S_OFFSET 2 -#define SYSREG_CONFIG0_S_SIZE 1 -#define SYSREG_CONFIG0_O_OFFSET 3 -#define SYSREG_CONFIG0_O_SIZE 1 -#define SYSREG_CONFIG0_P_OFFSET 4 -#define SYSREG_CONFIG0_P_SIZE 1 -#define SYSREG_CONFIG0_J_OFFSET 5 -#define SYSREG_CONFIG0_J_SIZE 1 -#define SYSREG_CONFIG0_F_OFFSET 6 -#define SYSREG_CONFIG0_F_SIZE 1 -#define SYSREG_MMUT_OFFSET 7 -#define SYSREG_MMUT_SIZE 3 -#define SYSREG_AR_OFFSET 10 -#define SYSREG_AR_SIZE 3 -#define SYSREG_AT_OFFSET 13 -#define SYSREG_AT_SIZE 3 -#define SYSREG_PROCESSORREVISION_OFFSET 16 -#define SYSREG_PROCESSORREVISION_SIZE 8 -#define SYSREG_PROCESSORID_OFFSET 24 -#define SYSREG_PROCESSORID_SIZE 8 - -/* Bitfields in CONFIG1 */ -#define SYSREG_DASS_OFFSET 0 -#define SYSREG_DASS_SIZE 3 -#define SYSREG_DLSZ_OFFSET 3 -#define SYSREG_DLSZ_SIZE 3 -#define SYSREG_DSET_OFFSET 6 -#define SYSREG_DSET_SIZE 4 -#define SYSREG_IASS_OFFSET 10 -#define SYSREG_IASS_SIZE 3 -#define SYSREG_ILSZ_OFFSET 13 -#define SYSREG_ILSZ_SIZE 3 -#define SYSREG_ISET_OFFSET 16 -#define SYSREG_ISET_SIZE 4 -#define SYSREG_DMMUSZ_OFFSET 20 -#define SYSREG_DMMUSZ_SIZE 6 -#define SYSREG_IMMUSZ_OFFSET 26 -#define SYSREG_IMMUSZ_SIZE 6 - -/* Bitfields in TLBEHI */ -#define SYSREG_ASID_OFFSET 0 -#define SYSREG_ASID_SIZE 8 -#define SYSREG_TLBEHI_I_OFFSET 8 -#define SYSREG_TLBEHI_I_SIZE 1 -#define SYSREG_TLBEHI_V_OFFSET 9 -#define SYSREG_TLBEHI_V_SIZE 1 -#define SYSREG_VPN_OFFSET 10 -#define SYSREG_VPN_SIZE 22 - -/* Bitfields in TLBELO */ -#define SYSREG_W_OFFSET 0 -#define SYSREG_W_SIZE 1 -#define SYSREG_TLBELO_D_OFFSET 1 -#define SYSREG_TLBELO_D_SIZE 1 -#define SYSREG_SZ_OFFSET 2 -#define SYSREG_SZ_SIZE 2 -#define SYSREG_AP_OFFSET 4 -#define SYSREG_AP_SIZE 3 -#define SYSREG_B_OFFSET 7 -#define SYSREG_B_SIZE 1 -#define SYSREG_G_OFFSET 8 -#define SYSREG_G_SIZE 1 -#define SYSREG_TLBELO_C_OFFSET 9 -#define SYSREG_TLBELO_C_SIZE 1 -#define SYSREG_PFN_OFFSET 10 -#define SYSREG_PFN_SIZE 22 - -/* Bitfields in MMUCR */ -#define SYSREG_E_OFFSET 0 -#define SYSREG_E_SIZE 1 -#define SYSREG_M_OFFSET 1 -#define SYSREG_M_SIZE 1 -#define SYSREG_MMUCR_I_OFFSET 2 -#define SYSREG_MMUCR_I_SIZE 1 -#define SYSREG_MMUCR_N_OFFSET 3 -#define SYSREG_MMUCR_N_SIZE 1 -#define SYSREG_MMUCR_S_OFFSET 4 -#define SYSREG_MMUCR_S_SIZE 1 -#define SYSREG_DLA_OFFSET 8 -#define SYSREG_DLA_SIZE 6 -#define SYSREG_DRP_OFFSET 14 -#define SYSREG_DRP_SIZE 6 -#define SYSREG_ILA_OFFSET 20 -#define SYSREG_ILA_SIZE 6 -#define SYSREG_IRP_OFFSET 26 -#define SYSREG_IRP_SIZE 6 - -/* Bitfields in PCCR */ -#define SYSREG_PCCR_E_OFFSET 0 -#define SYSREG_PCCR_E_SIZE 1 -#define SYSREG_PCCR_R_OFFSET 1 -#define SYSREG_PCCR_R_SIZE 1 -#define SYSREG_PCCR_C_OFFSET 2 -#define SYSREG_PCCR_C_SIZE 1 -#define SYSREG_PCCR_S_OFFSET 3 -#define SYSREG_PCCR_S_SIZE 1 -#define SYSREG_IEC_OFFSET 4 -#define SYSREG_IEC_SIZE 1 -#define SYSREG_IE0_OFFSET 5 -#define SYSREG_IE0_SIZE 1 -#define SYSREG_IE1_OFFSET 6 -#define SYSREG_IE1_SIZE 1 -#define SYSREG_FC_OFFSET 8 -#define SYSREG_FC_SIZE 1 -#define SYSREG_F0_OFFSET 9 -#define SYSREG_F0_SIZE 1 -#define SYSREG_F1_OFFSET 10 -#define SYSREG_F1_SIZE 1 -#define SYSREG_CONF0_OFFSET 12 -#define SYSREG_CONF0_SIZE 6 -#define SYSREG_CONF1_OFFSET 18 -#define SYSREG_CONF1_SIZE 6 - -/* Constants for ECR */ -#define ECR_UNRECOVERABLE 0 -#define ECR_TLB_MULTIPLE 1 -#define ECR_BUS_ERROR_WRITE 2 -#define ECR_BUS_ERROR_READ 3 -#define ECR_NMI 4 -#define ECR_ADDR_ALIGN_X 5 -#define ECR_PROTECTION_X 6 -#define ECR_DEBUG 7 -#define ECR_ILLEGAL_OPCODE 8 -#define ECR_UNIMPL_INSTRUCTION 9 -#define ECR_PRIVILEGE_VIOLATION 10 -#define ECR_FPE 11 -#define ECR_COPROC_ABSENT 12 -#define ECR_ADDR_ALIGN_R 13 -#define ECR_ADDR_ALIGN_W 14 -#define ECR_PROTECTION_R 15 -#define ECR_PROTECTION_W 16 -#define ECR_DTLB_MODIFIED 17 -#define ECR_TLB_MISS_X 20 -#define ECR_TLB_MISS_R 24 -#define ECR_TLB_MISS_W 28 - -/* Bit manipulation macros */ -#define SYSREG_BIT(name) \ - (1 << SYSREG_##name##_OFFSET) -#define SYSREG_BF(name,value) \ - (((value) & ((1 << SYSREG_##name##_SIZE) - 1)) \ - << SYSREG_##name##_OFFSET) -#define SYSREG_BFEXT(name,value)\ - (((value) >> SYSREG_##name##_OFFSET) \ - & ((1 << SYSREG_##name##_SIZE) - 1)) -#define SYSREG_BFINS(name,value,old) \ - (((old) & ~(((1 << SYSREG_##name##_SIZE) - 1) \ - << SYSREG_##name##_OFFSET)) \ - | SYSREG_BF(name,value)) - -/* Register access macros */ -#ifdef __CHECKER__ -extern unsigned long __builtin_mfsr(unsigned long reg); -extern void __builtin_mtsr(unsigned long reg, unsigned long value); -#endif - -#define sysreg_read(reg) __builtin_mfsr(SYSREG_##reg) -#define sysreg_write(reg, value) __builtin_mtsr(SYSREG_##reg, value) - -#endif /* __ASM_AVR32_SYSREG_H */ diff --git a/include/asm-avr32/system.h b/include/asm-avr32/system.h deleted file mode 100644 index 9702c2213e1e..000000000000 --- a/include/asm-avr32/system.h +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_SYSTEM_H -#define __ASM_AVR32_SYSTEM_H - -#include -#include -#include - -#include -#include - -#define xchg(ptr,x) \ - ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -#define nop() asm volatile("nop") - -#define mb() asm volatile("" : : : "memory") -#define rmb() mb() -#define wmb() asm volatile("sync 0" : : : "memory") -#define read_barrier_depends() do { } while(0) -#define set_mb(var, value) do { var = value; mb(); } while(0) - -/* - * Help PathFinder and other Nexus-compliant debuggers keep track of - * the current PID by emitting an Ownership Trace Message each time we - * switch task. - */ -#ifdef CONFIG_OWNERSHIP_TRACE -#include -#define finish_arch_switch(prev) \ - do { \ - ocd_write(PID, prev->pid); \ - ocd_write(PID, current->pid); \ - } while(0) -#endif - -/* - * switch_to(prev, next, last) should switch from task `prev' to task - * `next'. `prev' will never be the same as `next'. - * - * We just delegate everything to the __switch_to assembly function, - * which is implemented in arch/avr32/kernel/switch_to.S - * - * mb() tells GCC not to cache `current' across this call. - */ -struct cpu_context; -struct task_struct; -extern struct task_struct *__switch_to(struct task_struct *, - struct cpu_context *, - struct cpu_context *); -#define switch_to(prev, next, last) \ - do { \ - last = __switch_to(prev, &prev->thread.cpu_context + 1, \ - &next->thread.cpu_context); \ - } while (0) - -#ifdef CONFIG_SMP -# error "The AVR32 port does not support SMP" -#else -# define smp_mb() barrier() -# define smp_rmb() barrier() -# define smp_wmb() barrier() -# define smp_read_barrier_depends() do { } while(0) -#endif - -#include - -extern void __xchg_called_with_bad_pointer(void); - -static inline unsigned long xchg_u32(u32 val, volatile u32 *m) -{ - u32 ret; - - asm volatile("xchg %[ret], %[m], %[val]" - : [ret] "=&r"(ret), "=m"(*m) - : "m"(*m), [m] "r"(m), [val] "r"(val) - : "memory"); - return ret; -} - -static inline unsigned long __xchg(unsigned long x, - volatile void *ptr, - int size) -{ - switch(size) { - case 4: - return xchg_u32(x, ptr); - default: - __xchg_called_with_bad_pointer(); - return x; - } -} - -static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old, - unsigned long new) -{ - __u32 ret; - - asm volatile( - "1: ssrf 5\n" - " ld.w %[ret], %[m]\n" - " cp.w %[ret], %[old]\n" - " brne 2f\n" - " stcond %[m], %[new]\n" - " brne 1b\n" - "2:\n" - : [ret] "=&r"(ret), [m] "=m"(*m) - : "m"(m), [old] "ir"(old), [new] "r"(new) - : "memory", "cc"); - return ret; -} - -extern unsigned long __cmpxchg_u64_unsupported_on_32bit_kernels( - volatile int * m, unsigned long old, unsigned long new); -#define __cmpxchg_u64 __cmpxchg_u64_unsupported_on_32bit_kernels - -/* This function doesn't exist, so you'll get a linker error - if something tries to do an invalid cmpxchg(). */ -extern void __cmpxchg_called_with_bad_pointer(void); - -#define __HAVE_ARCH_CMPXCHG 1 - -static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, - unsigned long new, int size) -{ - switch (size) { - case 4: - return __cmpxchg_u32(ptr, old, new); - case 8: - return __cmpxchg_u64(ptr, old, new); - } - - __cmpxchg_called_with_bad_pointer(); - return old; -} - -#define cmpxchg(ptr, old, new) \ - ((typeof(*(ptr)))__cmpxchg((ptr), (unsigned long)(old), \ - (unsigned long)(new), \ - sizeof(*(ptr)))) - -#include - -static inline unsigned long __cmpxchg_local(volatile void *ptr, - unsigned long old, - unsigned long new, int size) -{ - switch (size) { - case 4: - return __cmpxchg_u32(ptr, old, new); - default: - return __cmpxchg_local_generic(ptr, old, new, size); - } - - return old; -} - -#define cmpxchg_local(ptr, old, new) \ - ((typeof(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(old), \ - (unsigned long)(new), \ - sizeof(*(ptr)))) - -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -struct pt_regs; -void NORET_TYPE die(const char *str, struct pt_regs *regs, long err); -void _exception(long signr, struct pt_regs *regs, int code, - unsigned long addr); - -#define arch_align_stack(x) (x) - -#endif /* __ASM_AVR32_SYSTEM_H */ diff --git a/include/asm-avr32/termbits.h b/include/asm-avr32/termbits.h deleted file mode 100644 index db2daab31fdb..000000000000 --- a/include/asm-avr32/termbits.h +++ /dev/null @@ -1,195 +0,0 @@ -#ifndef __ASM_AVR32_TERMBITS_H -#define __ASM_AVR32_TERMBITS_H - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate (not used) */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ASM_AVR32_TERMBITS_H */ diff --git a/include/asm-avr32/termios.h b/include/asm-avr32/termios.h deleted file mode 100644 index 0152aba35154..000000000000 --- a/include/asm-avr32/termios.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_TERMIOS_H -#define __ASM_AVR32_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -#include - -#endif /* __KERNEL__ */ - -#endif /* __ASM_AVR32_TERMIOS_H */ diff --git a/include/asm-avr32/thread_info.h b/include/asm-avr32/thread_info.h deleted file mode 100644 index 294b25f9323d..000000000000 --- a/include/asm-avr32/thread_info.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_THREAD_INFO_H -#define __ASM_AVR32_THREAD_INFO_H - -#include - -#define THREAD_SIZE_ORDER 1 -#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) - -#ifndef __ASSEMBLY__ -#include - -struct task_struct; -struct exec_domain; - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - __u32 cpu; - __s32 preempt_count; /* 0 => preemptable, <0 => BUG */ - __u32 rar_saved; /* return address... */ - __u32 rsr_saved; /* ...and status register - saved by debug handler - when setting up - trampoline */ - struct restart_block restart_block; - __u8 supervisor_stack[0]; -}; - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .restart_block = { \ - .fn = do_no_restart_syscall \ - } \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -/* - * Get the thread information struct from C. - * We do the usual trick and use the lower end of the stack for this - */ -static inline struct thread_info *current_thread_info(void) -{ - unsigned long addr = ~(THREAD_SIZE - 1); - - asm("and %0, sp" : "=r"(addr) : "0"(addr)); - return (struct thread_info *)addr; -} - -#define get_thread_info(ti) get_task_struct((ti)->task) -#define put_thread_info(ti) put_task_struct((ti)->task) - -#endif /* !__ASSEMBLY__ */ - -#define PREEMPT_ACTIVE 0x40000000 - -/* - * Thread information flags - * - these are process state flags that various assembly files may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling - TIF_NEED_RESCHED */ -#define TIF_BREAKPOINT 4 /* enter monitor mode on return */ -#define TIF_SINGLE_STEP 5 /* single step in progress */ -#define TIF_MEMDIE 6 -#define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */ -#define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */ -#define TIF_FREEZE 29 -#define TIF_DEBUG 30 /* debugging enabled */ -#define TIF_USERSPACE 31 /* true if FS sets userspace */ - -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) -#define _TIF_SINGLE_STEP (1 << TIF_SINGLE_STEP) -#define _TIF_MEMDIE (1 << TIF_MEMDIE) -#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) -#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP) - -/* Note: The masks below must never span more than 16 bits! */ - -/* work to do on interrupt/exception return */ -#define _TIF_WORK_MASK \ - ((1 << TIF_SIGPENDING) \ - | (1 << TIF_NEED_RESCHED) \ - | (1 << TIF_POLLING_NRFLAG) \ - | (1 << TIF_BREAKPOINT) \ - | (1 << TIF_RESTORE_SIGMASK)) - -/* work to do on any return to userspace */ -#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE)) -/* work to do on return from debug mode */ -#define _TIF_DBGWORK_MASK (_TIF_WORK_MASK & ~(1 << TIF_BREAKPOINT)) - -#endif /* __ASM_AVR32_THREAD_INFO_H */ diff --git a/include/asm-avr32/timex.h b/include/asm-avr32/timex.h deleted file mode 100644 index 187dcf38b210..000000000000 --- a/include/asm-avr32/timex.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_TIMEX_H -#define __ASM_AVR32_TIMEX_H - -/* - * This is the frequency of the timer used for Linux's timer interrupt. - * The value should be defined as accurate as possible or under certain - * circumstances Linux timekeeping might become inaccurate or fail. - * - * For many system the exact clockrate of the timer isn't known but due to - * the way this value is used we can get away with a wrong value as long - * as this value is: - * - * - a multiple of HZ - * - a divisor of the actual rate - * - * 500000 is a good such cheat value. - * - * The obscure number 1193182 is the same as used by the original i8254 - * time in legacy PC hardware; the chip is never found in AVR32 systems. - */ -#define CLOCK_TICK_RATE 500000 /* Underlying HZ */ - -typedef unsigned long cycles_t; - -static inline cycles_t get_cycles (void) -{ - return 0; -} - -#define ARCH_HAS_READ_CURRENT_TIMER - -#endif /* __ASM_AVR32_TIMEX_H */ diff --git a/include/asm-avr32/tlb.h b/include/asm-avr32/tlb.h deleted file mode 100644 index 5c55f9ce7c7d..000000000000 --- a/include/asm-avr32/tlb.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_TLB_H -#define __ASM_AVR32_TLB_H - -#define tlb_start_vma(tlb, vma) \ - flush_cache_range(vma, vma->vm_start, vma->vm_end) - -#define tlb_end_vma(tlb, vma) \ - flush_tlb_range(vma, vma->vm_start, vma->vm_end) - -#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while(0) - -/* - * Flush whole TLB for MM - */ -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -#include - -/* - * For debugging purposes - */ -extern void show_dtlb_entry(unsigned int index); -extern void dump_dtlb(void); - -#endif /* __ASM_AVR32_TLB_H */ diff --git a/include/asm-avr32/tlbflush.h b/include/asm-avr32/tlbflush.h deleted file mode 100644 index bf90a786f6be..000000000000 --- a/include/asm-avr32/tlbflush.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_TLBFLUSH_H -#define __ASM_AVR32_TLBFLUSH_H - -#include - -/* - * TLB flushing: - * - * - flush_tlb() flushes the current mm struct TLBs - * - flush_tlb_all() flushes all processes' TLB entries - * - flush_tlb_mm(mm) flushes the specified mm context TLBs - * - flush_tlb_page(vma, vmaddr) flushes one page - * - flush_tlb_range(vma, start, end) flushes a range of pages - * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages - */ -extern void flush_tlb(void); -extern void flush_tlb_all(void); -extern void flush_tlb_mm(struct mm_struct *mm); -extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page); - -extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); - -#endif /* __ASM_AVR32_TLBFLUSH_H */ diff --git a/include/asm-avr32/topology.h b/include/asm-avr32/topology.h deleted file mode 100644 index 5b766cbb4806..000000000000 --- a/include/asm-avr32/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_AVR32_TOPOLOGY_H -#define __ASM_AVR32_TOPOLOGY_H - -#include - -#endif /* __ASM_AVR32_TOPOLOGY_H */ diff --git a/include/asm-avr32/traps.h b/include/asm-avr32/traps.h deleted file mode 100644 index 6a8fb944f414..000000000000 --- a/include/asm-avr32/traps.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_TRAPS_H -#define __ASM_AVR32_TRAPS_H - -#include - -struct undef_hook { - struct list_head node; - u32 insn_mask; - u32 insn_val; - int (*fn)(struct pt_regs *regs, u32 insn); -}; - -void register_undef_hook(struct undef_hook *hook); -void unregister_undef_hook(struct undef_hook *hook); - -#endif /* __ASM_AVR32_TRAPS_H */ diff --git a/include/asm-avr32/types.h b/include/asm-avr32/types.h deleted file mode 100644 index 9cefda6f534a..000000000000 --- a/include/asm-avr32/types.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_TYPES_H -#define __ASM_AVR32_TYPES_H - -#include - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - - -#endif /* __ASM_AVR32_TYPES_H */ diff --git a/include/asm-avr32/uaccess.h b/include/asm-avr32/uaccess.h deleted file mode 100644 index ed092395215e..000000000000 --- a/include/asm-avr32/uaccess.h +++ /dev/null @@ -1,324 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_UACCESS_H -#define __ASM_AVR32_UACCESS_H - -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -typedef struct { - unsigned int is_user_space; -} mm_segment_t; - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons (Data Segment Register?), these macros are misnamed. - */ -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) -#define segment_eq(a,b) ((a).is_user_space == (b).is_user_space) - -#define USER_ADDR_LIMIT 0x80000000 - -#define KERNEL_DS MAKE_MM_SEG(0) -#define USER_DS MAKE_MM_SEG(1) - -#define get_ds() (KERNEL_DS) - -static inline mm_segment_t get_fs(void) -{ - return MAKE_MM_SEG(test_thread_flag(TIF_USERSPACE)); -} - -static inline void set_fs(mm_segment_t s) -{ - if (s.is_user_space) - set_thread_flag(TIF_USERSPACE); - else - clear_thread_flag(TIF_USERSPACE); -} - -/* - * Test whether a block of memory is a valid user space address. - * Returns 0 if the range is valid, nonzero otherwise. - * - * We do the following checks: - * 1. Is the access from kernel space? - * 2. Does (addr + size) set the carry bit? - * 3. Is (addr + size) a negative number (i.e. >= 0x80000000)? - * - * If yes on the first check, access is granted. - * If no on any of the others, access is denied. - */ -#define __range_ok(addr, size) \ - (test_thread_flag(TIF_USERSPACE) \ - && (((unsigned long)(addr) >= 0x80000000) \ - || ((unsigned long)(size) > 0x80000000) \ - || (((unsigned long)(addr) + (unsigned long)(size)) > 0x80000000))) - -#define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0)) - -/* Generic arbitrary sized copy. Return the number of bytes NOT copied */ -extern __kernel_size_t __copy_user(void *to, const void *from, - __kernel_size_t n); - -extern __kernel_size_t copy_to_user(void __user *to, const void *from, - __kernel_size_t n); -extern __kernel_size_t copy_from_user(void *to, const void __user *from, - __kernel_size_t n); - -static inline __kernel_size_t __copy_to_user(void __user *to, const void *from, - __kernel_size_t n) -{ - return __copy_user((void __force *)to, from, n); -} -static inline __kernel_size_t __copy_from_user(void *to, - const void __user *from, - __kernel_size_t n) -{ - return __copy_user(to, (const void __force *)from, n); -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -/* - * put_user: - Write a simple value into user space. - * @x: Value to copy to user space. - * @ptr: Destination address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple value from kernel space to user - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and @x must be assignable - * to the result of dereferencing @ptr. - * - * Returns zero on success, or -EFAULT on error. - */ -#define put_user(x,ptr) \ - __put_user_check((x),(ptr),sizeof(*(ptr))) - -/* - * get_user: - Get a simple variable from user space. - * @x: Variable to store result. - * @ptr: Source address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple variable from user space to kernel - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and the result of - * dereferencing @ptr must be assignable to @x without a cast. - * - * Returns zero on success, or -EFAULT on error. - * On error, the variable @x is set to zero. - */ -#define get_user(x,ptr) \ - __get_user_check((x),(ptr),sizeof(*(ptr))) - -/* - * __put_user: - Write a simple value into user space, with less checking. - * @x: Value to copy to user space. - * @ptr: Destination address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple value from kernel space to user - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and @x must be assignable - * to the result of dereferencing @ptr. - * - * Caller must check the pointer with access_ok() before calling this - * function. - * - * Returns zero on success, or -EFAULT on error. - */ -#define __put_user(x,ptr) \ - __put_user_nocheck((x),(ptr),sizeof(*(ptr))) - -/* - * __get_user: - Get a simple variable from user space, with less checking. - * @x: Variable to store result. - * @ptr: Source address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple variable from user space to kernel - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and the result of - * dereferencing @ptr must be assignable to @x without a cast. - * - * Caller must check the pointer with access_ok() before calling this - * function. - * - * Returns zero on success, or -EFAULT on error. - * On error, the variable @x is set to zero. - */ -#define __get_user(x,ptr) \ - __get_user_nocheck((x),(ptr),sizeof(*(ptr))) - -extern int __get_user_bad(void); -extern int __put_user_bad(void); - -#define __get_user_nocheck(x, ptr, size) \ -({ \ - unsigned long __gu_val = 0; \ - int __gu_err = 0; \ - \ - switch (size) { \ - case 1: __get_user_asm("ub", __gu_val, ptr, __gu_err); break; \ - case 2: __get_user_asm("uh", __gu_val, ptr, __gu_err); break; \ - case 4: __get_user_asm("w", __gu_val, ptr, __gu_err); break; \ - default: __gu_err = __get_user_bad(); break; \ - } \ - \ - x = (typeof(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x, ptr, size) \ -({ \ - unsigned long __gu_val = 0; \ - const typeof(*(ptr)) __user * __gu_addr = (ptr); \ - int __gu_err = 0; \ - \ - if (access_ok(VERIFY_READ, __gu_addr, size)) { \ - switch (size) { \ - case 1: \ - __get_user_asm("ub", __gu_val, __gu_addr, \ - __gu_err); \ - break; \ - case 2: \ - __get_user_asm("uh", __gu_val, __gu_addr, \ - __gu_err); \ - break; \ - case 4: \ - __get_user_asm("w", __gu_val, __gu_addr, \ - __gu_err); \ - break; \ - default: \ - __gu_err = __get_user_bad(); \ - break; \ - } \ - } else { \ - __gu_err = -EFAULT; \ - } \ - x = (typeof(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_asm(suffix, __gu_val, ptr, __gu_err) \ - asm volatile( \ - "1: ld." suffix " %1, %3 \n" \ - "2: \n" \ - " .section .fixup, \"ax\" \n" \ - "3: mov %0, %4 \n" \ - " rjmp 2b \n" \ - " .previous \n" \ - " .section __ex_table, \"a\" \n" \ - " .long 1b, 3b \n" \ - " .previous \n" \ - : "=r"(__gu_err), "=r"(__gu_val) \ - : "0"(__gu_err), "m"(*(ptr)), "i"(-EFAULT)) - -#define __put_user_nocheck(x, ptr, size) \ -({ \ - typeof(*(ptr)) __pu_val; \ - int __pu_err = 0; \ - \ - __pu_val = (x); \ - switch (size) { \ - case 1: __put_user_asm("b", ptr, __pu_val, __pu_err); break; \ - case 2: __put_user_asm("h", ptr, __pu_val, __pu_err); break; \ - case 4: __put_user_asm("w", ptr, __pu_val, __pu_err); break; \ - case 8: __put_user_asm("d", ptr, __pu_val, __pu_err); break; \ - default: __pu_err = __put_user_bad(); break; \ - } \ - __pu_err; \ -}) - -#define __put_user_check(x, ptr, size) \ -({ \ - typeof(*(ptr)) __pu_val; \ - typeof(*(ptr)) __user *__pu_addr = (ptr); \ - int __pu_err = 0; \ - \ - __pu_val = (x); \ - if (access_ok(VERIFY_WRITE, __pu_addr, size)) { \ - switch (size) { \ - case 1: \ - __put_user_asm("b", __pu_addr, __pu_val, \ - __pu_err); \ - break; \ - case 2: \ - __put_user_asm("h", __pu_addr, __pu_val, \ - __pu_err); \ - break; \ - case 4: \ - __put_user_asm("w", __pu_addr, __pu_val, \ - __pu_err); \ - break; \ - case 8: \ - __put_user_asm("d", __pu_addr, __pu_val, \ - __pu_err); \ - break; \ - default: \ - __pu_err = __put_user_bad(); \ - break; \ - } \ - } else { \ - __pu_err = -EFAULT; \ - } \ - __pu_err; \ -}) - -#define __put_user_asm(suffix, ptr, __pu_val, __gu_err) \ - asm volatile( \ - "1: st." suffix " %1, %3 \n" \ - "2: \n" \ - " .section .fixup, \"ax\" \n" \ - "3: mov %0, %4 \n" \ - " rjmp 2b \n" \ - " .previous \n" \ - " .section __ex_table, \"a\" \n" \ - " .long 1b, 3b \n" \ - " .previous \n" \ - : "=r"(__gu_err), "=m"(*(ptr)) \ - : "0"(__gu_err), "r"(__pu_val), "i"(-EFAULT)) - -extern __kernel_size_t clear_user(void __user *addr, __kernel_size_t size); -extern __kernel_size_t __clear_user(void __user *addr, __kernel_size_t size); - -extern long strncpy_from_user(char *dst, const char __user *src, long count); -extern long __strncpy_from_user(char *dst, const char __user *src, long count); - -extern long strnlen_user(const char __user *__s, long __n); -extern long __strnlen_user(const char __user *__s, long __n); - -#define strlen_user(s) strnlen_user(s, ~0UL >> 1) - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -#endif /* __ASM_AVR32_UACCESS_H */ diff --git a/include/asm-avr32/ucontext.h b/include/asm-avr32/ucontext.h deleted file mode 100644 index ac7259c2a799..000000000000 --- a/include/asm-avr32/ucontext.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __ASM_AVR32_UCONTEXT_H -#define __ASM_AVR32_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; - struct ucontext * uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; -}; - -#endif /* __ASM_AVR32_UCONTEXT_H */ diff --git a/include/asm-avr32/unaligned.h b/include/asm-avr32/unaligned.h deleted file mode 100644 index 041877290470..000000000000 --- a/include/asm-avr32/unaligned.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _ASM_AVR32_UNALIGNED_H -#define _ASM_AVR32_UNALIGNED_H - -/* - * AVR32 can handle some unaligned accesses, depending on the - * implementation. The AVR32 AP implementation can handle unaligned - * words, but halfwords must be halfword-aligned, and doublewords must - * be word-aligned. - * - * However, swapped word loads must be word-aligned so we can't - * optimize word loads in general. - */ - -#include -#include -#include - -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be - -#endif /* _ASM_AVR32_UNALIGNED_H */ diff --git a/include/asm-avr32/unistd.h b/include/asm-avr32/unistd.h deleted file mode 100644 index 89861a27543e..000000000000 --- a/include/asm-avr32/unistd.h +++ /dev/null @@ -1,345 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_UNISTD_H -#define __ASM_AVR32_UNISTD_H - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_umask 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_chown 16 -#define __NR_lchown 17 -#define __NR_lseek 18 -#define __NR__llseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount2 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_pause 28 -#define __NR_utime 29 -#define __NR_stat 30 -#define __NR_fstat 31 -#define __NR_lstat 32 -#define __NR_access 33 -#define __NR_chroot 34 -#define __NR_sync 35 -#define __NR_fsync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_clone 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_getcwd 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_setfsuid 52 -#define __NR_setfsgid 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_setpgid 56 -#define __NR_mremap 57 -#define __NR_setresuid 58 -#define __NR_getresuid 59 -#define __NR_setreuid 60 -#define __NR_setregid 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_rt_sigaction 67 -#define __NR_rt_sigreturn 68 -#define __NR_rt_sigprocmask 69 -#define __NR_rt_sigpending 70 -#define __NR_rt_sigtimedwait 71 -#define __NR_rt_sigqueueinfo 72 -#define __NR_rt_sigsuspend 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* SuS compliant getrlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_fchdir 84 -#define __NR_readlink 85 -#define __NR_pread 86 -#define __NR_pwrite 87 -#define __NR_swapon 88 -#define __NR_reboot 89 -#define __NR_mmap2 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_wait4 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_vhangup 101 -#define __NR_sigaltstack 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_swapoff 106 -#define __NR_sysinfo 107 -/* 108 was __NR_ipc for a little while */ -#define __NR_sendfile 109 -#define __NR_setdomainname 110 -#define __NR_uname 111 -#define __NR_adjtimex 112 -#define __NR_mprotect 113 -#define __NR_vfork 114 -#define __NR_init_module 115 -#define __NR_delete_module 116 -#define __NR_quotactl 117 -#define __NR_getpgid 118 -#define __NR_bdflush 119 -#define __NR_sysfs 120 -#define __NR_personality 121 -#define __NR_afs_syscall 122 /* Syscall for Andrew File System */ -#define __NR_getdents 123 -#define __NR_flock 124 -#define __NR_msync 125 -#define __NR_readv 126 -#define __NR_writev 127 -#define __NR_getsid 128 -#define __NR_fdatasync 129 -#define __NR__sysctl 130 -#define __NR_mlock 131 -#define __NR_munlock 132 -#define __NR_mlockall 133 -#define __NR_munlockall 134 -#define __NR_sched_setparam 135 -#define __NR_sched_getparam 136 -#define __NR_sched_setscheduler 137 -#define __NR_sched_getscheduler 138 -#define __NR_sched_yield 139 -#define __NR_sched_get_priority_max 140 -#define __NR_sched_get_priority_min 141 -#define __NR_sched_rr_get_interval 142 -#define __NR_nanosleep 143 -#define __NR_poll 144 -#define __NR_nfsservctl 145 -#define __NR_setresgid 146 -#define __NR_getresgid 147 -#define __NR_prctl 148 -#define __NR_socket 149 -#define __NR_bind 150 -#define __NR_connect 151 -#define __NR_listen 152 -#define __NR_accept 153 -#define __NR_getsockname 154 -#define __NR_getpeername 155 -#define __NR_socketpair 156 -#define __NR_send 157 -#define __NR_recv 158 -#define __NR_sendto 159 -#define __NR_recvfrom 160 -#define __NR_shutdown 161 -#define __NR_setsockopt 162 -#define __NR_getsockopt 163 -#define __NR_sendmsg 164 -#define __NR_recvmsg 165 -#define __NR_truncate64 166 -#define __NR_ftruncate64 167 -#define __NR_stat64 168 -#define __NR_lstat64 169 -#define __NR_fstat64 170 -#define __NR_pivot_root 171 -#define __NR_mincore 172 -#define __NR_madvise 173 -#define __NR_getdents64 174 -#define __NR_fcntl64 175 -#define __NR_gettid 176 -#define __NR_readahead 177 -#define __NR_setxattr 178 -#define __NR_lsetxattr 179 -#define __NR_fsetxattr 180 -#define __NR_getxattr 181 -#define __NR_lgetxattr 182 -#define __NR_fgetxattr 183 -#define __NR_listxattr 184 -#define __NR_llistxattr 185 -#define __NR_flistxattr 186 -#define __NR_removexattr 187 -#define __NR_lremovexattr 188 -#define __NR_fremovexattr 189 -#define __NR_tkill 190 -#define __NR_sendfile64 191 -#define __NR_futex 192 -#define __NR_sched_setaffinity 193 -#define __NR_sched_getaffinity 194 -#define __NR_capget 195 -#define __NR_capset 196 -#define __NR_io_setup 197 -#define __NR_io_destroy 198 -#define __NR_io_getevents 199 -#define __NR_io_submit 200 -#define __NR_io_cancel 201 -#define __NR_fadvise64 202 -#define __NR_exit_group 203 -#define __NR_lookup_dcookie 204 -#define __NR_epoll_create 205 -#define __NR_epoll_ctl 206 -#define __NR_epoll_wait 207 -#define __NR_remap_file_pages 208 -#define __NR_set_tid_address 209 - -#define __NR_timer_create 210 -#define __NR_timer_settime 211 -#define __NR_timer_gettime 212 -#define __NR_timer_getoverrun 213 -#define __NR_timer_delete 214 -#define __NR_clock_settime 215 -#define __NR_clock_gettime 216 -#define __NR_clock_getres 217 -#define __NR_clock_nanosleep 218 -#define __NR_statfs64 219 -#define __NR_fstatfs64 220 -#define __NR_tgkill 221 - /* 222 reserved for tux */ -#define __NR_utimes 223 -#define __NR_fadvise64_64 224 - -#define __NR_cacheflush 225 - -#define __NR_vserver 226 -#define __NR_mq_open 227 -#define __NR_mq_unlink 228 -#define __NR_mq_timedsend 229 -#define __NR_mq_timedreceive 230 -#define __NR_mq_notify 231 -#define __NR_mq_getsetattr 232 -#define __NR_kexec_load 233 -#define __NR_waitid 234 -#define __NR_add_key 235 -#define __NR_request_key 236 -#define __NR_keyctl 237 -#define __NR_ioprio_set 238 -#define __NR_ioprio_get 239 -#define __NR_inotify_init 240 -#define __NR_inotify_add_watch 241 -#define __NR_inotify_rm_watch 242 -#define __NR_openat 243 -#define __NR_mkdirat 244 -#define __NR_mknodat 245 -#define __NR_fchownat 246 -#define __NR_futimesat 247 -#define __NR_fstatat64 248 -#define __NR_unlinkat 249 -#define __NR_renameat 250 -#define __NR_linkat 251 -#define __NR_symlinkat 252 -#define __NR_readlinkat 253 -#define __NR_fchmodat 254 -#define __NR_faccessat 255 -#define __NR_pselect6 256 -#define __NR_ppoll 257 -#define __NR_unshare 258 -#define __NR_set_robust_list 259 -#define __NR_get_robust_list 260 -#define __NR_splice 261 -#define __NR_sync_file_range 262 -#define __NR_tee 263 -#define __NR_vmsplice 264 -#define __NR_epoll_pwait 265 - -#define __NR_msgget 266 -#define __NR_msgsnd 267 -#define __NR_msgrcv 268 -#define __NR_msgctl 269 -#define __NR_semget 270 -#define __NR_semop 271 -#define __NR_semctl 272 -#define __NR_semtimedop 273 -#define __NR_shmat 274 -#define __NR_shmget 275 -#define __NR_shmdt 276 -#define __NR_shmctl 277 - -#define __NR_utimensat 278 -#define __NR_signalfd 279 -/* 280 was __NR_timerfd */ -#define __NR_eventfd 281 - -#ifdef __KERNEL__ -#define NR_syscalls 282 - -/* Old stuff */ -#define __IGNORE_uselib -#define __IGNORE_mmap - -/* NUMA stuff */ -#define __IGNORE_mbind -#define __IGNORE_get_mempolicy -#define __IGNORE_set_mempolicy -#define __IGNORE_migrate_pages -#define __IGNORE_move_pages - -/* SMP stuff */ -#define __IGNORE_getcpu - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall"); - -#endif /* __KERNEL__ */ - -#endif /* __ASM_AVR32_UNISTD_H */ diff --git a/include/asm-avr32/user.h b/include/asm-avr32/user.h deleted file mode 100644 index 7e9152f81f5e..000000000000 --- a/include/asm-avr32/user.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note: We may not need these definitions for AVR32, as we don't - * support a.out. - */ -#ifndef __ASM_AVR32_USER_H -#define __ASM_AVR32_USER_H - -#include -#include -#include - -/* - * Core file format: The core file is written in such a way that gdb - * can understand it and provide useful information to the user (under - * linux we use the `trad-core' bfd). The file contents are as follows: - * - * upage: 1 page consisting of a user struct that tells gdb - * what is present in the file. Directly after this is a - * copy of the task_struct, which is currently not used by gdb, - * but it may come in handy at some point. All of the registers - * are stored as part of the upage. The upage should always be - * only one page long. - * data: The data segment follows next. We use current->end_text to - * current->brk to pick up all of the user variables, plus any memory - * that may have been sbrk'ed. No attempt is made to determine if a - * page is demand-zero or if a page is totally unused, we just cover - * the entire range. All of the addresses are rounded in such a way - * that an integral number of pages is written. - * stack: We need the stack information in order to get a meaningful - * backtrace. We need to write the data from usp to - * current->start_stack, so we round each of these in order to be able - * to write an integer number of pages. - */ - -struct user_fpu_struct { - /* We have no FPU (yet) */ -}; - -struct user { - struct pt_regs regs; /* entire machine state */ - size_t u_tsize; /* text size (pages) */ - size_t u_dsize; /* data size (pages) */ - size_t u_ssize; /* stack size (pages) */ - unsigned long start_code; /* text starting address */ - unsigned long start_data; /* data starting address */ - unsigned long start_stack; /* stack starting address */ - long int signal; /* signal causing core dump */ - unsigned long u_ar0; /* help gdb find registers */ - unsigned long magic; /* identifies a core file */ - char u_comm[32]; /* user command name */ -}; - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_DATA_START_ADDR (u.start_data) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif /* __ASM_AVR32_USER_H */ diff --git a/include/asm-avr32/xor.h b/include/asm-avr32/xor.h deleted file mode 100644 index 99c87aa0af4f..000000000000 --- a/include/asm-avr32/xor.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_XOR_H -#define _ASM_XOR_H - -#include - -#endif -- cgit v1.2.3 From 964d219b6a8a79ea4c8d77b6dcdcbbcda403c392 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 5 Aug 2008 13:49:09 +0200 Subject: avr32: Introduce arch/avr32/mach-*/include/mach Add arch/avr32/mach-*/include to include search path and copy all the files from include/asm/arch there. The old files will be removed once ARM does the same change and all common drivers are converted. Signed-off-by: Haavard Skinnemoen --- arch/avr32/Makefile | 7 +- arch/avr32/mach-at32ap/include/mach/at32ap700x.h | 49 +++++++++ arch/avr32/mach-at32ap/include/mach/board.h | 121 +++++++++++++++++++++++ arch/avr32/mach-at32ap/include/mach/cpu.h | 35 +++++++ arch/avr32/mach-at32ap/include/mach/gpio.h | 45 +++++++++ arch/avr32/mach-at32ap/include/mach/init.h | 18 ++++ arch/avr32/mach-at32ap/include/mach/io.h | 39 ++++++++ arch/avr32/mach-at32ap/include/mach/irq.h | 14 +++ arch/avr32/mach-at32ap/include/mach/pm.h | 51 ++++++++++ arch/avr32/mach-at32ap/include/mach/portmux.h | 29 ++++++ arch/avr32/mach-at32ap/include/mach/smc.h | 113 +++++++++++++++++++++ arch/avr32/mach-at32ap/include/mach/sram.h | 30 ++++++ 12 files changed, 550 insertions(+), 1 deletion(-) create mode 100644 arch/avr32/mach-at32ap/include/mach/at32ap700x.h create mode 100644 arch/avr32/mach-at32ap/include/mach/board.h create mode 100644 arch/avr32/mach-at32ap/include/mach/cpu.h create mode 100644 arch/avr32/mach-at32ap/include/mach/gpio.h create mode 100644 arch/avr32/mach-at32ap/include/mach/init.h create mode 100644 arch/avr32/mach-at32ap/include/mach/io.h create mode 100644 arch/avr32/mach-at32ap/include/mach/irq.h create mode 100644 arch/avr32/mach-at32ap/include/mach/pm.h create mode 100644 arch/avr32/mach-at32ap/include/mach/portmux.h create mode 100644 arch/avr32/mach-at32ap/include/mach/smc.h create mode 100644 arch/avr32/mach-at32ap/include/mach/sram.h diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index 17a3529341dd..5b46433d53a5 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -23,9 +23,14 @@ KBUILD_AFLAGS += $(cpuflags-y) CHECKFLAGS += -D__avr32__ -D__BIG_ENDIAN +machine-$(CONFIG_PLATFORM_AT32AP) := at32ap +machdirs := $(patsubst %,arch/avr32/mach-%/, $(machine-y)) + +KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs)) + head-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/head.o head-y += arch/avr32/kernel/head.o -core-$(CONFIG_PLATFORM_AT32AP) += arch/avr32/mach-at32ap/ +core-y += $(machdirs) core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/ core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/ core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/ diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h new file mode 100644 index 000000000000..d18a3053be0d --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h @@ -0,0 +1,49 @@ +/* + * Pin definitions for AT32AP7000. + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_AT32AP700X_H__ +#define __ASM_ARCH_AT32AP700X_H__ + +#define GPIO_PERIPH_A 0 +#define GPIO_PERIPH_B 1 + +/* + * Pin numbers identifying specific GPIO pins on the chip. They can + * also be converted to IRQ numbers by passing them through + * gpio_to_irq(). + */ +#define GPIO_PIOA_BASE (0) +#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32) +#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32) +#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32) +#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32) + +#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N)) +#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N)) +#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N)) +#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N)) +#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N)) + + +/* + * DMAC peripheral hardware handshaking interfaces, used with dw_dmac + */ +#define DMAC_MCI_RX 0 +#define DMAC_MCI_TX 1 +#define DMAC_DAC_TX 2 +#define DMAC_AC97_A_RX 3 +#define DMAC_AC97_A_TX 4 +#define DMAC_AC97_B_RX 5 +#define DMAC_AC97_B_TX 6 +#define DMAC_DMAREQ_0 7 +#define DMAC_DMAREQ_1 8 +#define DMAC_DMAREQ_2 9 +#define DMAC_DMAREQ_3 10 + +#endif /* __ASM_ARCH_AT32AP700X_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h new file mode 100644 index 000000000000..e60e9076544d --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -0,0 +1,121 @@ +/* + * Platform data definitions. + */ +#ifndef __ASM_ARCH_BOARD_H +#define __ASM_ARCH_BOARD_H + +#include + +#define GPIO_PIN_NONE (-1) + +/* + * Clock rates for various on-board oscillators. The number of entries + * in this array is chip-dependent. + */ +extern unsigned long at32_board_osc_rates[]; + +/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */ +void at32_add_system_devices(void); + +#define ATMEL_MAX_UART 4 +extern struct platform_device *atmel_default_console_device; + +struct atmel_uart_data { + short use_dma_tx; /* use transmit DMA? */ + short use_dma_rx; /* use receive DMA? */ + void __iomem *regs; /* virtual base address, if any */ +}; +void at32_map_usart(unsigned int hw_id, unsigned int line); +struct platform_device *at32_add_device_usart(unsigned int id); + +struct eth_platform_data { + u32 phy_mask; + u8 is_rmii; +}; +struct platform_device * +at32_add_device_eth(unsigned int id, struct eth_platform_data *data); + +struct spi_board_info; +struct platform_device * +at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n); + +struct atmel_lcdfb_info; +struct platform_device * +at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, + unsigned long fbmem_start, unsigned long fbmem_len, + unsigned int pin_config); + +struct usba_platform_data; +struct platform_device * +at32_add_device_usba(unsigned int id, struct usba_platform_data *data); + +struct ide_platform_data { + u8 cs; +}; +struct platform_device * +at32_add_device_ide(unsigned int id, unsigned int extint, + struct ide_platform_data *data); + +/* mask says which PWM channels to mux */ +struct platform_device *at32_add_device_pwm(u32 mask); + +/* depending on what's hooked up, not all SSC pins will be used */ +#define ATMEL_SSC_TK 0x01 +#define ATMEL_SSC_TF 0x02 +#define ATMEL_SSC_TD 0x04 +#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD) + +#define ATMEL_SSC_RK 0x10 +#define ATMEL_SSC_RF 0x20 +#define ATMEL_SSC_RD 0x40 +#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD) + +struct platform_device * +at32_add_device_ssc(unsigned int id, unsigned int flags); + +struct i2c_board_info; +struct platform_device *at32_add_device_twi(unsigned int id, + struct i2c_board_info *b, + unsigned int n); + +struct mci_platform_data; +struct platform_device * +at32_add_device_mci(unsigned int id, struct mci_platform_data *data); + +struct ac97c_platform_data { + unsigned short dma_rx_periph_id; + unsigned short dma_tx_periph_id; + unsigned short dma_controller_id; + int reset_pin; +}; +struct platform_device * +at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data); + +struct platform_device *at32_add_device_abdac(unsigned int id); +struct platform_device *at32_add_device_psif(unsigned int id); + +struct cf_platform_data { + int detect_pin; + int reset_pin; + int vcc_pin; + int ready_pin; + u8 cs; +}; +struct platform_device * +at32_add_device_cf(unsigned int id, unsigned int extint, + struct cf_platform_data *data); + +/* NAND / SmartMedia */ +struct atmel_nand_data { + int enable_pin; /* chip enable */ + int det_pin; /* card detect */ + int rdy_pin; /* ready/busy */ + u8 ale; /* address line number connected to ALE */ + u8 cle; /* address line number connected to CLE */ + u8 bus_width_16; /* buswidth is 16 bit */ + struct mtd_partition *(*partition_info)(int size, int *num_partitions); +}; +struct platform_device * +at32_add_device_nand(unsigned int id, struct atmel_nand_data *data); + +#endif /* __ASM_ARCH_BOARD_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h new file mode 100644 index 000000000000..44d0bfa1f409 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/cpu.h @@ -0,0 +1,35 @@ +/* + * AVR32 and (fake) AT91 CPU identification + * + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_CPU_H +#define __ASM_ARCH_CPU_H + +/* + * Only AT32AP7000 is defined for now. We can identify the specific + * chip at runtime, but I'm not sure if it's really worth it. + */ +#ifdef CONFIG_CPU_AT32AP700X +# define cpu_is_at32ap7000() (1) +#else +# define cpu_is_at32ap7000() (0) +#endif + +/* + * Since this is AVR32, we will never run on any AT91 CPU. But these + * definitions may reduce clutter in common drivers. + */ +#define cpu_is_at91rm9200() (0) +#define cpu_is_at91sam9xe() (0) +#define cpu_is_at91sam9260() (0) +#define cpu_is_at91sam9261() (0) +#define cpu_is_at91sam9263() (0) +#define cpu_is_at91sam9rl() (0) +#define cpu_is_at91cap9() (0) + +#endif /* __ASM_ARCH_CPU_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/gpio.h b/arch/avr32/mach-at32ap/include/mach/gpio.h new file mode 100644 index 000000000000..0180f584ef03 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/gpio.h @@ -0,0 +1,45 @@ +#ifndef __ASM_AVR32_ARCH_GPIO_H +#define __ASM_AVR32_ARCH_GPIO_H + +#include +#include + + +/* Some GPIO chips can manage IRQs; some can't. The exact numbers can + * be changed if needed, but for the moment they're not configurable. + */ +#define ARCH_NR_GPIOS (NR_GPIO_IRQS + 2 * 32) + + +/* Arch-neutral GPIO API, supporting both "native" and external GPIOs. */ +#include + +static inline int gpio_get_value(unsigned int gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return __gpio_cansleep(gpio); +} + + +static inline int gpio_to_irq(unsigned int gpio) +{ + if (gpio < NR_GPIO_IRQS) + return gpio + GPIO_IRQ_BASE; + return -EINVAL; +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return irq - GPIO_IRQ_BASE; +} + +#endif /* __ASM_AVR32_ARCH_GPIO_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/init.h b/arch/avr32/mach-at32ap/include/mach/init.h new file mode 100644 index 000000000000..bc40e3d46150 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/init.h @@ -0,0 +1,18 @@ +/* + * AT32AP platform initialization calls. + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_AT32AP_INIT_H__ +#define __ASM_AVR32_AT32AP_INIT_H__ + +void setup_platform(void); +void setup_board(void); + +void at32_setup_serial_console(unsigned int usart_id); + +#endif /* __ASM_AVR32_AT32AP_INIT_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/io.h b/arch/avr32/mach-at32ap/include/mach/io.h new file mode 100644 index 000000000000..4ec6abc68ea3 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/io.h @@ -0,0 +1,39 @@ +#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H +#define __ASM_AVR32_ARCH_AT32AP_IO_H + +/* For "bizarre" halfword swapping */ +#include + +#if defined(CONFIG_AP700X_32_BIT_SMC) +# define __swizzle_addr_b(addr) (addr ^ 3UL) +# define __swizzle_addr_w(addr) (addr ^ 2UL) +# define __swizzle_addr_l(addr) (addr) +# define ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define ioswabl(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define __mem_ioswabw(a, x) swab16(x) +# define __mem_ioswabl(a, x) swab32(x) +#elif defined(CONFIG_AP700X_16_BIT_SMC) +# define __swizzle_addr_b(addr) (addr ^ 1UL) +# define __swizzle_addr_w(addr) (addr) +# define __swizzle_addr_l(addr) (addr) +# define ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define ioswabl(a, x) swahw32(x) +# define __mem_ioswabb(a, x) (x) +# define __mem_ioswabw(a, x) swab16(x) +# define __mem_ioswabl(a, x) swahb32(x) +#else +# define __swizzle_addr_b(addr) (addr) +# define __swizzle_addr_w(addr) (addr) +# define __swizzle_addr_l(addr) (addr) +# define ioswabb(a, x) (x) +# define ioswabw(a, x) swab16(x) +# define ioswabl(a, x) swab32(x) +# define __mem_ioswabb(a, x) (x) +# define __mem_ioswabw(a, x) (x) +# define __mem_ioswabl(a, x) (x) +#endif + +#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/irq.h b/arch/avr32/mach-at32ap/include/mach/irq.h new file mode 100644 index 000000000000..608e350368c7 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/irq.h @@ -0,0 +1,14 @@ +#ifndef __ASM_AVR32_ARCH_IRQ_H +#define __ASM_AVR32_ARCH_IRQ_H + +#define EIM_IRQ_BASE NR_INTERNAL_IRQS +#define NR_EIM_IRQS 32 +#define AT32_EXTINT(n) (EIM_IRQ_BASE + (n)) + +#define GPIO_IRQ_BASE (EIM_IRQ_BASE + NR_EIM_IRQS) +#define NR_GPIO_CTLR (5 /*internal*/ + 1 /*external*/) +#define NR_GPIO_IRQS (NR_GPIO_CTLR * 32) + +#define NR_IRQS (GPIO_IRQ_BASE + NR_GPIO_IRQS) + +#endif /* __ASM_AVR32_ARCH_IRQ_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/pm.h b/arch/avr32/mach-at32ap/include/mach/pm.h new file mode 100644 index 000000000000..979b355b77b6 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/pm.h @@ -0,0 +1,51 @@ +/* + * AVR32 AP Power Management. + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_ARCH_PM_H +#define __ASM_AVR32_ARCH_PM_H + +/* Possible arguments to the "sleep" instruction */ +#define CPU_SLEEP_IDLE 0 +#define CPU_SLEEP_FROZEN 1 +#define CPU_SLEEP_STANDBY 2 +#define CPU_SLEEP_STOP 3 +#define CPU_SLEEP_STATIC 5 + +#ifndef __ASSEMBLY__ +extern void cpu_enter_idle(void); +extern void cpu_enter_standby(unsigned long sdramc_base); + +extern bool disable_idle_sleep; + +static inline void cpu_disable_idle_sleep(void) +{ + disable_idle_sleep = true; +} + +static inline void cpu_enable_idle_sleep(void) +{ + disable_idle_sleep = false; +} + +static inline void cpu_idle_sleep(void) +{ + /* + * If we're using the COUNT and COMPARE registers for + * timekeeping, we can't use the IDLE state. + */ + if (disable_idle_sleep) + cpu_relax(); + else + cpu_enter_idle(); +} + +void intc_set_suspend_handler(unsigned long offset); +#endif + +#endif /* __ASM_AVR32_ARCH_PM_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h new file mode 100644 index 000000000000..b1abe6b4e4ef --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/portmux.h @@ -0,0 +1,29 @@ +/* + * AT32 portmux interface. + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_PORTMUX_H__ +#define __ASM_ARCH_PORTMUX_H__ + +/* + * Set up pin multiplexing, called from board init only. + * + * The following flags determine the initial state of the pin. + */ +#define AT32_GPIOF_PULLUP 0x00000001 /* (not-OUT) Enable pull-up */ +#define AT32_GPIOF_OUTPUT 0x00000002 /* (OUT) Enable output driver */ +#define AT32_GPIOF_HIGH 0x00000004 /* (OUT) Set output high */ +#define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */ +#define AT32_GPIOF_MULTIDRV 0x00000010 /* Enable multidriver option */ + +void at32_select_periph(unsigned int pin, unsigned int periph, + unsigned long flags); +void at32_select_gpio(unsigned int pin, unsigned long flags); +void at32_reserve_pin(unsigned int pin); + +#endif /* __ASM_ARCH_PORTMUX_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/smc.h b/arch/avr32/mach-at32ap/include/mach/smc.h new file mode 100644 index 000000000000..c98eea44a70a --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/smc.h @@ -0,0 +1,113 @@ +/* + * Static Memory Controller for AT32 chips + * + * Copyright (C) 2006 Atmel Corporation + * + * Inspired by the OMAP2 General-Purpose Memory Controller interface + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ARCH_AT32AP_SMC_H +#define __ARCH_AT32AP_SMC_H + +/* + * All timing parameters are in nanoseconds. + */ +struct smc_timing { + /* Delay from address valid to assertion of given strobe */ + int ncs_read_setup; + int nrd_setup; + int ncs_write_setup; + int nwe_setup; + + /* Pulse length of given strobe */ + int ncs_read_pulse; + int nrd_pulse; + int ncs_write_pulse; + int nwe_pulse; + + /* Total cycle length of given operation */ + int read_cycle; + int write_cycle; + + /* Minimal recovery times, will extend cycle if needed */ + int ncs_read_recover; + int nrd_recover; + int ncs_write_recover; + int nwe_recover; +}; + +/* + * All timing parameters are in clock cycles. + */ +struct smc_config { + + /* Delay from address valid to assertion of given strobe */ + u8 ncs_read_setup; + u8 nrd_setup; + u8 ncs_write_setup; + u8 nwe_setup; + + /* Pulse length of given strobe */ + u8 ncs_read_pulse; + u8 nrd_pulse; + u8 ncs_write_pulse; + u8 nwe_pulse; + + /* Total cycle length of given operation */ + u8 read_cycle; + u8 write_cycle; + + /* Bus width in bytes */ + u8 bus_width; + + /* + * 0: Data is sampled on rising edge of NCS + * 1: Data is sampled on rising edge of NRD + */ + unsigned int nrd_controlled:1; + + /* + * 0: Data is driven on falling edge of NCS + * 1: Data is driven on falling edge of NWR + */ + unsigned int nwe_controlled:1; + + /* + * 0: NWAIT is disabled + * 1: Reserved + * 2: NWAIT is frozen mode + * 3: NWAIT in ready mode + */ + unsigned int nwait_mode:2; + + /* + * 0: Byte select access type + * 1: Byte write access type + */ + unsigned int byte_write:1; + + /* + * Number of clock cycles before data is released after + * the rising edge of the read controlling signal + * + * Total cycles from SMC is tdf_cycles + 1 + */ + unsigned int tdf_cycles:4; + + /* + * 0: TDF optimization disabled + * 1: TDF optimization enabled + */ + unsigned int tdf_mode:1; +}; + +extern void smc_set_timing(struct smc_config *config, + const struct smc_timing *timing); + +extern int smc_set_configuration(int cs, const struct smc_config *config); +extern struct smc_config *smc_get_configuration(int cs); + +#endif /* __ARCH_AT32AP_SMC_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/sram.h b/arch/avr32/mach-at32ap/include/mach/sram.h new file mode 100644 index 000000000000..4838dae7601a --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/sram.h @@ -0,0 +1,30 @@ +/* + * Simple SRAM allocator + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_ARCH_SRAM_H +#define __ASM_AVR32_ARCH_SRAM_H + +#include + +extern struct gen_pool *sram_pool; + +static inline unsigned long sram_alloc(size_t len) +{ + if (!sram_pool) + return 0UL; + + return gen_pool_alloc(sram_pool, len); +} + +static inline void sram_free(unsigned long addr, size_t len) +{ + return gen_pool_free(sram_pool, addr, len); +} + +#endif /* __ASM_AVR32_ARCH_SRAM_H */ -- cgit v1.2.3 From 3663b736a5083b3bce74520b637f630f01f66a7f Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 5 Aug 2008 13:57:38 +0200 Subject: avr32: Use instead of Update all avr32-specific files to use the new platform-specific header locations. Drivers shared with ARM are left alone for now. Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atngw100/flash.c | 2 +- arch/avr32/boards/atngw100/setup.c | 8 ++++---- arch/avr32/boards/atstk1000/atstk1002.c | 10 +++++----- arch/avr32/boards/atstk1000/atstk1003.c | 8 ++++---- arch/avr32/boards/atstk1000/atstk1004.c | 8 ++++---- arch/avr32/boards/atstk1000/flash.c | 2 +- arch/avr32/boards/atstk1000/setup.c | 6 +++--- arch/avr32/include/asm/gpio.h | 2 +- arch/avr32/include/asm/io.h | 2 +- arch/avr32/include/asm/irq.h | 2 +- arch/avr32/kernel/process.c | 2 +- arch/avr32/kernel/setup.c | 4 ++-- arch/avr32/kernel/time.c | 2 +- arch/avr32/mach-at32ap/at32ap700x.c | 8 ++++---- arch/avr32/mach-at32ap/hsmc.c | 2 +- arch/avr32/mach-at32ap/pio.c | 2 +- arch/avr32/mach-at32ap/pm-at32ap700x.S | 2 +- arch/avr32/mach-at32ap/pm.c | 4 ++-- drivers/ata/pata_at32.c | 4 ++-- drivers/mmc/host/atmel-mci.c | 2 +- 20 files changed, 41 insertions(+), 41 deletions(-) diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c index b07ae63aa548..55ccc9ce4892 100644 --- a/arch/avr32/boards/atngw100/flash.c +++ b/arch/avr32/boards/atngw100/flash.c @@ -13,7 +13,7 @@ #include #include -#include +#include static struct smc_timing flash_timing __initdata = { .ncs_read_setup = 0, diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index c7fe94d03a1e..670c87b2db12 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -23,10 +23,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include /* Oscillator frequencies. These are board-specific */ unsigned long at32_board_osc_rates[3] = { diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 8538ba75ef92..b33542b97563 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -23,10 +23,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include "atstk1000.h" @@ -49,7 +49,7 @@ unsigned long at32_board_osc_rates[3] = { */ #ifdef CONFIG_BOARD_ATSTK1006 #include -#include +#include static struct smc_timing nand_timing __initdata = { .ncs_read_setup = 0, diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c index 591fc73b554a..0cf664174c17 100644 --- a/arch/avr32/boards/atstk1000/atstk1003.c +++ b/arch/avr32/boards/atstk1000/atstk1003.c @@ -20,10 +20,10 @@ #include -#include -#include -#include -#include +#include +#include +#include +#include #include "atstk1000.h" diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index d9c5e0a21256..50a5273e5916 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -22,10 +22,10 @@ #include -#include -#include -#include -#include +#include +#include +#include +#include #include "atstk1000.h" diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c index 3d0a102ad45e..6e4d561977ff 100644 --- a/arch/avr32/boards/atstk1000/flash.c +++ b/arch/avr32/boards/atstk1000/flash.c @@ -13,7 +13,7 @@ #include #include -#include +#include static struct smc_timing flash_timing __initdata = { .ncs_read_setup = 0, diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c index 8bedf93876a3..2d6b560115d9 100644 --- a/arch/avr32/boards/atstk1000/setup.c +++ b/arch/avr32/boards/atstk1000/setup.c @@ -18,9 +18,9 @@ #include -#include -#include -#include +#include +#include +#include #include "atstk1000.h" diff --git a/arch/avr32/include/asm/gpio.h b/arch/avr32/include/asm/gpio.h index 19e8ccc77db3..b771f7105964 100644 --- a/arch/avr32/include/asm/gpio.h +++ b/arch/avr32/include/asm/gpio.h @@ -1,6 +1,6 @@ #ifndef __ASM_AVR32_GPIO_H #define __ASM_AVR32_GPIO_H -#include +#include #endif /* __ASM_AVR32_GPIO_H */ diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h index 8be7ea9c9047..a520f77ead96 100644 --- a/arch/avr32/include/asm/io.h +++ b/arch/avr32/include/asm/io.h @@ -8,7 +8,7 @@ #include #include -#include +#include /* virt_to_phys will only work when address is in P1 or P2 */ static __inline__ unsigned long virt_to_phys(volatile void *address) diff --git a/arch/avr32/include/asm/irq.h b/arch/avr32/include/asm/irq.h index c563b7720c1a..6fa8913f8548 100644 --- a/arch/avr32/include/asm/irq.h +++ b/arch/avr32/include/asm/irq.h @@ -3,7 +3,7 @@ #define NR_INTERNAL_IRQS 64 -#include +#include #ifndef NR_IRQS #define NR_IRQS (NR_INTERNAL_IRQS) diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c index ff820a9e743a..2c08ac992ac3 100644 --- a/arch/avr32/kernel/process.c +++ b/arch/avr32/kernel/process.c @@ -18,7 +18,7 @@ #include #include -#include +#include void (*pm_power_off)(void) = NULL; EXPORT_SYMBOL(pm_power_off); diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c index ce48c14f4349..d8e623c426c1 100644 --- a/arch/avr32/kernel/setup.c +++ b/arch/avr32/kernel/setup.c @@ -26,8 +26,8 @@ #include #include -#include -#include +#include +#include extern int root_mountflags; diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index 7e7f32771ae1..283481d74a5b 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -15,7 +15,7 @@ #include -#include +#include static cycle_t read_cycle_count(void) diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 1617048c86c5..92bfb4d8ae45 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -20,10 +20,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include -!Iinclude/asm-s390/cio.h +!Iarch/s390/include/asm/cio.h ccw devices @@ -114,7 +114,7 @@ ccw device structure. Device drivers must not bypass those functions or strange side effects may happen. -!Iinclude/asm-s390/ccwdev.h +!Iarch/s390/include/asm/ccwdev.h !Edrivers/s390/cio/device.c !Edrivers/s390/cio/device_ops.c @@ -125,7 +125,7 @@ measurement data which is made available by the channel subsystem for each channel attached device. -!Iinclude/asm-s390/cmb.h +!Iarch/s390/include/asm/cmb.h !Edrivers/s390/cio/cmf.c @@ -142,7 +142,7 @@ ccw group devices -!Iinclude/asm-s390/ccwgroup.h +!Iarch/s390/include/asm/ccwgroup.h !Edrivers/s390/cio/ccwgroup.c -- cgit v1.2.3 From ef647f1300d69adb8223d970554d59d7e244db6d Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 5 Aug 2008 18:42:51 -0700 Subject: bridge: Eliminate unnecessary forward delay From: Stephen Hemminger Based upon original patch by Herbert Xu, which contained the following problem description: -------------------- When the forward delay is set to zero, we still delay the setting of the forwarding state by one or possibly two timers depending on whether STP is enabled. This could either turn out to be instantaneous, or horribly slow depending on the load of the machine. As there is nothing preventing us from enabling forwarding straight away, this patch eliminates this potential delay by executing the code directly if the forward delay is zero. The effect of this problem is that immediately after the carrier comes on a port, the bridge will drop all packets received from that port until it enters forwarding mode, thus causing unnecessary packet loss. Note that this patch doesn't fully remove the delay due to the link watcher. We should also check the carrier state when we are about to drop an incoming packet because the port is disabled. But that's for another patch. -------------------- This version of the fix takes a different approach, in that it just does the state change directly. Signed-off-by: David S. Miller --- net/bridge/br_stp.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c index 921bbe5cb94a..6e63ec3f1fcf 100644 --- a/net/bridge/br_stp.c +++ b/net/bridge/br_stp.c @@ -368,14 +368,25 @@ static void br_make_blocking(struct net_bridge_port *p) /* called under bridge lock */ static void br_make_forwarding(struct net_bridge_port *p) { - if (p->state == BR_STATE_BLOCKING) { - if (p->br->stp_enabled == BR_KERNEL_STP) - p->state = BR_STATE_LISTENING; - else - p->state = BR_STATE_LEARNING; + struct net_bridge *br = p->br; - br_log_state(p); - mod_timer(&p->forward_delay_timer, jiffies + p->br->forward_delay); } + if (p->state != BR_STATE_BLOCKING) + return; + + if (br->forward_delay == 0) { + p->state = BR_STATE_FORWARDING; + br_topology_change_detection(br); + del_timer(&p->forward_delay_timer); + } + else if (p->br->stp_enabled == BR_KERNEL_STP) + p->state = BR_STATE_LISTENING; + else + p->state = BR_STATE_LEARNING; + + br_log_state(p); + + if (br->forward_delay != 0) + mod_timer(&p->forward_delay_timer, jiffies + br->forward_delay); } /* called under bridge lock */ -- cgit v1.2.3 From 1211a64554065316e02b3c62b320088ad4f63260 Mon Sep 17 00:00:00 2001 From: Robert Olsson Date: Tue, 5 Aug 2008 18:44:26 -0700 Subject: pktgen: random flow Random flow generation has not worked. This fixes it. Signed-off-by: Robert Olsson Signed-off-by: David S. Miller --- net/core/pktgen.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 3284605f2ec7..9c87320fdf3f 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -2085,15 +2085,19 @@ static inline int f_pick(struct pktgen_dev *pkt_dev) if (pkt_dev->flows[flow].count >= pkt_dev->lflow) { /* reset time */ pkt_dev->flows[flow].count = 0; + pkt_dev->flows[flow].flags = 0; pkt_dev->curfl += 1; if (pkt_dev->curfl >= pkt_dev->cflows) pkt_dev->curfl = 0; /*reset */ } } else { flow = random32() % pkt_dev->cflows; + pkt_dev->curfl = flow; - if (pkt_dev->flows[flow].count > pkt_dev->lflow) + if (pkt_dev->flows[flow].count > pkt_dev->lflow) { pkt_dev->flows[flow].count = 0; + pkt_dev->flows[flow].flags = 0; + } } return pkt_dev->curfl; -- cgit v1.2.3 From ff2a79a5a934fe0dbb136ffad61f79b5c6385614 Mon Sep 17 00:00:00 2001 From: Robert Olsson Date: Tue, 5 Aug 2008 18:45:05 -0700 Subject: pktgen: mac count dst_mac_count and src_mac_count patch from Eneas Hunguana We have sent one mac address to much. Signed-off-by: Robert Olsson Signed-off-by: David S. Miller --- net/core/pktgen.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 9c87320fdf3f..2498cdaf8cbe 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -2166,7 +2166,7 @@ static void mod_cur_headers(struct pktgen_dev *pkt_dev) mc = random32() % pkt_dev->src_mac_count; else { mc = pkt_dev->cur_src_mac_offset++; - if (pkt_dev->cur_src_mac_offset > + if (pkt_dev->cur_src_mac_offset >= pkt_dev->src_mac_count) pkt_dev->cur_src_mac_offset = 0; } @@ -2193,7 +2193,7 @@ static void mod_cur_headers(struct pktgen_dev *pkt_dev) else { mc = pkt_dev->cur_dst_mac_offset++; - if (pkt_dev->cur_dst_mac_offset > + if (pkt_dev->cur_dst_mac_offset >= pkt_dev->dst_mac_count) { pkt_dev->cur_dst_mac_offset = 0; } -- cgit v1.2.3 From ffb208479bd62ab26c29a242faeb1de1c6d5fcdc Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 5 Aug 2008 18:46:57 -0700 Subject: AX.25: Fix sysctl registration if !CONFIG_AX25_DAMA_SLAVE Since 49ffcf8f99e8d33ec8afb450956804af518fd788 ("sysctl: update sysctl_check_table") setting struct ctl_table.procname = NULL does no longer work as it used to the way the AX.25 code is expecting it to resulting in the AX.25 sysctl registration code to break if CONFIG_AX25_DAMA_SLAVE was not set as in some distribution kernels. Kernel releases from 2.6.24 are affected. Signed-off-by: Ralf Baechle Signed-off-by: David S. Miller --- net/ax25/sysctl_net_ax25.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/net/ax25/sysctl_net_ax25.c b/net/ax25/sysctl_net_ax25.c index f597987b2424..f288fc4aef9b 100644 --- a/net/ax25/sysctl_net_ax25.c +++ b/net/ax25/sysctl_net_ax25.c @@ -36,6 +36,7 @@ static struct ctl_path ax25_path[] = { { .procname = "ax25", .ctl_name = NET_AX25, }, { } }; + static const ctl_table ax25_param_table[] = { { .ctl_name = NET_AX25_IP_DEFAULT_MODE, @@ -167,6 +168,7 @@ static const ctl_table ax25_param_table[] = { .extra1 = &min_proto, .extra2 = &max_proto }, +#ifdef CONFIG_AX25_DAMA_SLAVE { .ctl_name = NET_AX25_DAMA_SLAVE_TIMEOUT, .procname = "dama_slave_timeout", @@ -177,6 +179,8 @@ static const ctl_table ax25_param_table[] = { .extra1 = &min_ds_timeout, .extra2 = &max_ds_timeout }, +#endif + { .ctl_name = 0 } /* that's all, folks! */ }; @@ -210,16 +214,6 @@ void ax25_register_sysctl(void) ax25_table[n].procname = ax25_dev->dev->name; ax25_table[n].mode = 0555; -#ifndef CONFIG_AX25_DAMA_SLAVE - /* - * We do not wish to have a representation of this parameter - * in /proc/sys/ when configured *not* to include the - * AX.25 DAMA slave code, do we? - */ - - child[AX25_VALUES_DS_TIMEOUT].procname = NULL; -#endif - child[AX25_MAX_VALUES].ctl_name = 0; /* just in case... */ for (k = 0; k < AX25_MAX_VALUES; k++) -- cgit v1.2.3 From 4e1e7fb9e879d48011a887715d7966484d9644ea Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 2 Aug 2008 07:26:12 -0400 Subject: bundle up Unix SET_PATH_INFO args into a struct and change name We'd like to be able to use the unix SET_PATH_INFO_BASIC args to set file times as well, but that makes the argument list rather long. Bundle up the args for unix SET_PATH_INFO call into a struct. For now, we don't actually use the times fields anywhere. That will be done in a follow-on patch. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifspdu.h | 2 +- fs/cifs/cifsproto.h | 17 +++++++++++++--- fs/cifs/cifssmb.c | 26 ++++++++++++------------ fs/cifs/dir.c | 58 +++++++++++++++++++++++++++++------------------------ fs/cifs/file.c | 19 +++++++++--------- fs/cifs/inode.c | 54 +++++++++++++++++++++++++++++-------------------- 6 files changed, 102 insertions(+), 74 deletions(-) diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h index 409abce12732..d2a073edd1b8 100644 --- a/fs/cifs/cifspdu.h +++ b/fs/cifs/cifspdu.h @@ -262,7 +262,7 @@ */ #define CIFS_NO_HANDLE 0xFFFF -#define NO_CHANGE_64 cpu_to_le64(0xFFFFFFFFFFFFFFFFULL) +#define NO_CHANGE_64 0xFFFFFFFFFFFFFFFFULL #define NO_CHANGE_32 0xFFFFFFFFUL /* IPC$ in ASCII */ diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index b9f5e935f821..e65ff9849092 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -191,9 +191,20 @@ extern int CIFSSMBSetEOF(const int xid, struct cifsTconInfo *tcon, extern int CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon, __u64 size, __u16 fileHandle, __u32 opener_pid, bool AllocSizeFlag); -extern int CIFSSMBUnixSetPerms(const int xid, struct cifsTconInfo *pTcon, - char *full_path, __u64 mode, __u64 uid, - __u64 gid, dev_t dev, + +struct cifs_unix_set_info_args { + __u64 ctime; + __u64 atime; + __u64 mtime; + __u64 mode; + __u64 uid; + __u64 gid; + dev_t device; +}; + +extern int CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *pTcon, + char *fileName, + const struct cifs_unix_set_info_args *args, const struct nls_table *nls_codepage, int remap_special_chars); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index c621ffa2ca90..ced8eaa9d37d 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -5013,10 +5013,9 @@ SetAttrLgcyRetry: #endif /* temporarily unneeded SetAttr legacy function */ int -CIFSSMBUnixSetPerms(const int xid, struct cifsTconInfo *tcon, - char *fileName, __u64 mode, __u64 uid, __u64 gid, - dev_t device, const struct nls_table *nls_codepage, - int remap) +CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *tcon, char *fileName, + const struct cifs_unix_set_info_args *args, + const struct nls_table *nls_codepage, int remap) { TRANSACTION2_SPI_REQ *pSMB = NULL; TRANSACTION2_SPI_RSP *pSMBr = NULL; @@ -5025,6 +5024,7 @@ CIFSSMBUnixSetPerms(const int xid, struct cifsTconInfo *tcon, int bytes_returned = 0; FILE_UNIX_BASIC_INFO *data_offset; __u16 params, param_offset, offset, count, byte_count; + __u64 mode = args->mode; cFYI(1, ("In SetUID/GID/Mode")); setPermsRetry: @@ -5080,16 +5080,16 @@ setPermsRetry: set file size and do not want to truncate file size to zero accidently as happened on one Samba server beta by putting zero instead of -1 here */ - data_offset->EndOfFile = NO_CHANGE_64; - data_offset->NumOfBytes = NO_CHANGE_64; - data_offset->LastStatusChange = NO_CHANGE_64; - data_offset->LastAccessTime = NO_CHANGE_64; - data_offset->LastModificationTime = NO_CHANGE_64; - data_offset->Uid = cpu_to_le64(uid); - data_offset->Gid = cpu_to_le64(gid); + data_offset->EndOfFile = cpu_to_le64(NO_CHANGE_64); + data_offset->NumOfBytes = cpu_to_le64(NO_CHANGE_64); + data_offset->LastStatusChange = cpu_to_le64(args->ctime); + data_offset->LastAccessTime = cpu_to_le64(args->atime); + data_offset->LastModificationTime = cpu_to_le64(args->mtime); + data_offset->Uid = cpu_to_le64(args->uid); + data_offset->Gid = cpu_to_le64(args->gid); /* better to leave device as zero when it is */ - data_offset->DevMajor = cpu_to_le64(MAJOR(device)); - data_offset->DevMinor = cpu_to_le64(MINOR(device)); + data_offset->DevMajor = cpu_to_le64(MAJOR(args->device)); + data_offset->DevMinor = cpu_to_le64(MINOR(args->device)); data_offset->Permissions = cpu_to_le64(mode); if (S_ISREG(mode)) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index fb69c1fa85c9..634cf330fe04 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -226,23 +226,26 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, /* If Open reported that we actually created a file then we now have to set the mode if possible */ if ((pTcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) { + struct cifs_unix_set_info_args args = { + .mode = mode, + .ctime = NO_CHANGE_64, + .atime = NO_CHANGE_64, + .mtime = NO_CHANGE_64, + .device = 0, + }; + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { - CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode, - (__u64)current->fsuid, - (__u64)current->fsgid, - 0 /* dev */, - cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + args.uid = (__u64) current->fsuid; + args.gid = (__u64) current->fsgid; } else { - CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode, - (__u64)-1, - (__u64)-1, - 0 /* dev */, - cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + args.uid = NO_CHANGE_64; + args.gid = NO_CHANGE_64; } + + CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args, + cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_MAP_SPECIAL_CHR); } else { /* BB implement mode setting via Windows security descriptors e.g. */ @@ -357,21 +360,24 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode, if (full_path == NULL) rc = -ENOMEM; else if (pTcon->unix_ext) { - mode &= ~current->fs->umask; + struct cifs_unix_set_info_args args = { + .mode = mode & ~current->fs->umask, + .ctime = NO_CHANGE_64, + .atime = NO_CHANGE_64, + .mtime = NO_CHANGE_64, + .device = device_number, + }; if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { - rc = CIFSSMBUnixSetPerms(xid, pTcon, full_path, - mode, (__u64)current->fsuid, - (__u64)current->fsgid, - device_number, cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + args.uid = (__u64) current->fsuid; + args.gid = (__u64) current->fsgid; } else { - rc = CIFSSMBUnixSetPerms(xid, pTcon, - full_path, mode, (__u64)-1, (__u64)-1, - device_number, cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + args.uid = NO_CHANGE_64; + args.gid = NO_CHANGE_64; } + rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path, + &args, cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_MAP_SPECIAL_CHR); if (!rc) { rc = cifs_get_inode_info_unix(&newinode, full_path, diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 0aac824371a5..d40738d2ab58 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -310,18 +310,19 @@ int cifs_open(struct inode *inode, struct file *file) /* time to set mode which we can not set earlier due to problems creating new read-only files */ if (pTcon->unix_ext) { - CIFSSMBUnixSetPerms(xid, pTcon, full_path, - inode->i_mode, - (__u64)-1, (__u64)-1, 0 /* dev */, + struct cifs_unix_set_info_args args = { + .mode = inode->i_mode, + .uid = NO_CHANGE_64, + .gid = NO_CHANGE_64, + .ctime = NO_CHANGE_64, + .atime = NO_CHANGE_64, + .mtime = NO_CHANGE_64, + .device = 0, + }; + CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); - } else { - /* BB implement via Windows security descriptors eg - CIFSSMBWinSetPerms(xid, pTcon, full_path, mode, - -1, -1, local_nls); - in the meantime could set r/o dos attribute when - perms are eg: mode & 0222 == 0 */ } } diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 0e5dccc2f79a..024846719f1f 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -986,23 +986,24 @@ mkdir_get_info: direntry->d_inode->i_nlink = 2; mode &= ~current->fs->umask; if (pTcon->unix_ext) { + struct cifs_unix_set_info_args args = { + .mode = mode, + .ctime = NO_CHANGE_64, + .atime = NO_CHANGE_64, + .mtime = NO_CHANGE_64, + .device = 0, + }; if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { - CIFSSMBUnixSetPerms(xid, pTcon, full_path, - mode, - (__u64)current->fsuid, - (__u64)current->fsgid, - 0 /* dev_t */, - cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + args.uid = (__u64)current->fsuid; + args.gid = (__u64)current->fsgid; } else { - CIFSSMBUnixSetPerms(xid, pTcon, full_path, - mode, (__u64)-1, - (__u64)-1, 0 /* dev_t */, - cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + args.uid = NO_CHANGE_64; + args.gid = NO_CHANGE_64; } + CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args, + cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_MAP_SPECIAL_CHR); } else { if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) && (mode & S_IWUGO) == 0) { @@ -1500,9 +1501,9 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) FILE_BASIC_INFO time_buf; bool set_time = false; bool set_dosattr = false; - __u64 mode = 0xFFFFFFFFFFFFFFFFULL; - __u64 uid = 0xFFFFFFFFFFFFFFFFULL; - __u64 gid = 0xFFFFFFFFFFFFFFFFULL; + __u64 mode = NO_CHANGE_64; + __u64 uid = NO_CHANGE_64; + __u64 gid = NO_CHANGE_64; struct cifsInodeInfo *cifsInode; struct inode *inode = direntry->d_inode; @@ -1586,12 +1587,21 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) } if ((pTcon->unix_ext) - && (attrs->ia_valid & (ATTR_MODE | ATTR_GID | ATTR_UID))) - rc = CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode, uid, gid, - 0 /* dev_t */, cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & + && (attrs->ia_valid & (ATTR_MODE | ATTR_GID | ATTR_UID))) { + struct cifs_unix_set_info_args args = { + .mode = mode, + .uid = uid, + .gid = gid, + .ctime = NO_CHANGE_64, + .atime = NO_CHANGE_64, + .mtime = NO_CHANGE_64, + .device = 0, + }; + rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args, + cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); - else if (attrs->ia_valid & ATTR_MODE) { + } else if (attrs->ia_valid & ATTR_MODE) { rc = 0; #ifdef CONFIG_CIFS_EXPERIMENTAL if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) -- cgit v1.2.3 From 063ea27925d70b1d9dd4343d685f722f0274bfd1 Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 6 Aug 2008 04:23:13 +0000 Subject: [CIFS] fix trailing whitespace Jeff left trailing whitespace in previous patch Signed-off-by: Steve French --- fs/cifs/cifssmb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index ced8eaa9d37d..f6e83a78618e 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -5014,7 +5014,7 @@ SetAttrLgcyRetry: int CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *tcon, char *fileName, - const struct cifs_unix_set_info_args *args, + const struct cifs_unix_set_info_args *args, const struct nls_table *nls_codepage, int remap) { TRANSACTION2_SPI_REQ *pSMB = NULL; -- cgit v1.2.3 From 6fc000e5190234c7e5b244d1e2095d50b630d63f Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 2 Aug 2008 07:26:12 -0400 Subject: change CIFSSMBSetTimes to CIFSSMBSetPathInfo CIFSSMBSetTimes is a deceptive name. This function does more that just set file times. Change it to CIFSSMBSetPathInfo, which is closer to its real purpose. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 2 +- fs/cifs/cifssmb.c | 6 +++--- fs/cifs/inode.c | 8 ++++---- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index e65ff9849092..eb2be992608d 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -172,7 +172,7 @@ extern int CIFSSMBQFSUnixInfo(const int xid, struct cifsTconInfo *tcon); extern int CIFSSMBQFSPosixInfo(const int xid, struct cifsTconInfo *tcon, struct kstatfs *FSData); -extern int CIFSSMBSetTimes(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBSetPathInfo(const int xid, struct cifsTconInfo *tcon, const char *fileName, const FILE_BASIC_INFO *data, const struct nls_table *nls_codepage, int remap_special_chars); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index f6e83a78618e..daf010a2ba80 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -4882,9 +4882,9 @@ CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon, int -CIFSSMBSetTimes(const int xid, struct cifsTconInfo *tcon, const char *fileName, - const FILE_BASIC_INFO *data, - const struct nls_table *nls_codepage, int remap) +CIFSSMBSetPathInfo(const int xid, struct cifsTconInfo *tcon, + const char *fileName, const FILE_BASIC_INFO *data, + const struct nls_table *nls_codepage, int remap) { TRANSACTION2_SPI_REQ *pSMB = NULL; TRANSACTION2_SPI_RSP *pSMBr = NULL; diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 024846719f1f..9d94afe9b60e 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -737,7 +737,7 @@ psx_del_no_retry: /* ATTRS set to normal clears r/o bit */ pinfo_buf->Attributes = cpu_to_le32(ATTR_NORMAL); if (!(pTcon->ses->flags & CIFS_SES_NT4)) - rc = CIFSSMBSetTimes(xid, pTcon, full_path, + rc = CIFSSMBSetPathInfo(xid, pTcon, full_path, pinfo_buf, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & @@ -1010,7 +1010,7 @@ mkdir_get_info: FILE_BASIC_INFO pInfo; memset(&pInfo, 0, sizeof(pInfo)); pInfo.Attributes = cpu_to_le32(ATTR_READONLY); - CIFSSMBSetTimes(xid, pTcon, full_path, + CIFSSMBSetPathInfo(xid, pTcon, full_path, &pInfo, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); @@ -1680,8 +1680,8 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) /* In the future we should experiment - try setting timestamps via Handle (SetFileInfo) instead of by path */ if (!(pTcon->ses->flags & CIFS_SES_NT4)) - rc = CIFSSMBSetTimes(xid, pTcon, full_path, &time_buf, - cifs_sb->local_nls, + rc = CIFSSMBSetPathInfo(xid, pTcon, full_path, + &time_buf, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); else -- cgit v1.2.3 From 2dd2dfa060650118661422d4e666ac804c388751 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 2 Aug 2008 07:26:12 -0400 Subject: Rename CIFSSMBSetFileTimes to CIFSSMBSetFileInfo and add PID arg The new name is more clear since this is also used to set file attributes. We'll need the pid_of_opener arg so that we can pass in filehandles of other pids and spare ourselves an open call. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 5 +++-- fs/cifs/cifssmb.c | 11 ++++------- fs/cifs/inode.c | 11 ++++++----- 3 files changed, 13 insertions(+), 14 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index eb2be992608d..a729d083e6f4 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -176,8 +176,9 @@ extern int CIFSSMBSetPathInfo(const int xid, struct cifsTconInfo *tcon, const char *fileName, const FILE_BASIC_INFO *data, const struct nls_table *nls_codepage, int remap_special_chars); -extern int CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon, - const FILE_BASIC_INFO *data, __u16 fid); +extern int CIFSSMBSetFileInfo(const int xid, struct cifsTconInfo *tcon, + const FILE_BASIC_INFO *data, __u16 fid, + __u32 pid_of_opener); #if 0 extern int CIFSSMBSetAttrLegacy(int xid, struct cifsTconInfo *tcon, char *fileName, __u16 dos_attributes, diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index daf010a2ba80..6e8e8fc04c02 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -4816,8 +4816,8 @@ CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon, __u64 size, time and resort to the original setpathinfo level which takes the ancient DOS time format with 2 second granularity */ int -CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon, - const FILE_BASIC_INFO *data, __u16 fid) +CIFSSMBSetFileInfo(const int xid, struct cifsTconInfo *tcon, + const FILE_BASIC_INFO *data, __u16 fid, __u32 pid_of_opener) { struct smb_com_transaction2_sfi_req *pSMB = NULL; char *data_offset; @@ -4830,11 +4830,8 @@ CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon, if (rc) return rc; - /* At this point there is no need to override the current pid - with the pid of the opener, but that could change if we someday - use an existing handle (rather than opening one on the fly) */ - /* pSMB->hdr.Pid = cpu_to_le16((__u16)pid_of_opener); - pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid_of_opener >> 16));*/ + pSMB->hdr.Pid = cpu_to_le16((__u16)pid_of_opener); + pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid_of_opener >> 16)); params = 6; pSMB->MaxSetupCount = 0; diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 9d94afe9b60e..d952914dfc4c 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -767,9 +767,10 @@ psx_del_no_retry: cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); if (rc == 0) { - rc = CIFSSMBSetFileTimes(xid, pTcon, - pinfo_buf, - netfid); + rc = CIFSSMBSetFileInfo(xid, pTcon, + pinfo_buf, + netfid, + current->tgid); CIFSSMBClose(xid, pTcon, netfid); } } @@ -1702,8 +1703,8 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); if (rc == 0) { - rc = CIFSSMBSetFileTimes(xid, pTcon, &time_buf, - netfid); + rc = CIFSSMBSetFileInfo(xid, pTcon, &time_buf, + netfid, current->tgid); CIFSSMBClose(xid, pTcon, netfid); } else { /* BB For even older servers we could convert time_buf -- cgit v1.2.3 From 95089910933e10768cfef1ab0bab0c55b962aacb Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 6 Aug 2008 04:39:02 +0000 Subject: [CIFS] cifs_mkdir and cifs_create should respect the setgid bit on parent dir If a server supports unix extensions but does not support POSIX create routines, then the client will create a new inode with a standard SMB mkdir or create/open call and then will set the mode. When it does this, it does not take the setgid bit on the parent directory into account. This patch has CIFS flip on the setgid bit when the parent directory has it. If the share is mounted with "setuids" then also change the group owner to the gid of the parent. This patch should apply cleanly on top of the setattr cleanup patches that I sent a few weeks ago. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/dir.c | 13 ++++++++++--- fs/cifs/inode.c | 18 +++++++++++++++--- 2 files changed, 25 insertions(+), 6 deletions(-) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 634cf330fe04..e962e75e6f7b 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -236,12 +236,14 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { args.uid = (__u64) current->fsuid; - args.gid = (__u64) current->fsgid; + if (inode->i_mode & S_ISGID) + args.gid = (__u64) inode->i_gid; + else + args.gid = (__u64) current->fsgid; } else { args.uid = NO_CHANGE_64; args.gid = NO_CHANGE_64; } - CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & @@ -270,7 +272,12 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) { newinode->i_uid = current->fsuid; - newinode->i_gid = current->fsgid; + if (inode->i_mode & S_ISGID) + newinode->i_gid = + inode->i_gid; + else + newinode->i_gid = + current->fsgid; } } } diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index d952914dfc4c..6d911896d74c 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -985,7 +985,12 @@ mkdir_get_info: * failed to get it from the server or was set bogus */ if ((direntry->d_inode) && (direntry->d_inode->i_nlink < 2)) direntry->d_inode->i_nlink = 2; + mode &= ~current->fs->umask; + /* must turn on setgid bit if parent dir has it */ + if (inode->i_mode & S_ISGID) + mode |= S_ISGID; + if (pTcon->unix_ext) { struct cifs_unix_set_info_args args = { .mode = mode, @@ -996,7 +1001,10 @@ mkdir_get_info: }; if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { args.uid = (__u64)current->fsuid; - args.gid = (__u64)current->fsgid; + if (inode->i_mode & S_ISGID) + args.gid = (__u64)inode->i_gid; + else + args.gid = (__u64)current->fsgid; } else { args.uid = NO_CHANGE_64; args.gid = NO_CHANGE_64; @@ -1026,8 +1034,12 @@ mkdir_get_info: CIFS_MOUNT_SET_UID) { direntry->d_inode->i_uid = current->fsuid; - direntry->d_inode->i_gid = - current->fsgid; + if (inode->i_mode & S_ISGID) + direntry->d_inode->i_gid = + inode->i_gid; + else + direntry->d_inode->i_gid = + current->fsgid; } } } -- cgit v1.2.3 From 18351070b86d155713cf790b26af4f21b1fd0b29 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 5 Aug 2008 21:42:21 -0700 Subject: Re-introduce "[SCSI] extend the last_sector_bug flag to cover more sectors" This re-introduces commit 2b142900784c6e38c8d39fa57d5f95ef08e735d8, which was reverted due to the regression it caused by commit fca082c9f1e11ec07efa8d2f9f13688521253f36. That regression was not root-caused by the original commit, it was just uncovered by it, and the real fix was done by Alan Stern in commit 580da34847488b404218d1d7f53b156f245f5555 ("Fix USB storage hang on command abort"). We can thus re-introduce the change that was confirmed by Alan Jenkins to be still required by his odd card reader. Cc: Alan Jenkins Cc: Alan Stern Cc: James Bottomley Signed-off-by: Linus Torvalds --- drivers/scsi/sd.c | 21 +++++++++++++++------ drivers/scsi/sd.h | 6 ++++++ include/scsi/scsi_device.h | 3 ++- 3 files changed, 23 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 8e08d51a0f05..e5e7d7856454 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -375,6 +375,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) struct gendisk *disk = rq->rq_disk; struct scsi_disk *sdkp; sector_t block = rq->sector; + sector_t threshold; unsigned int this_count = rq->nr_sectors; unsigned int timeout = sdp->timeout; int ret; @@ -422,13 +423,21 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) } /* - * Some devices (some sdcards for one) don't like it if the - * last sector gets read in a larger then 1 sector read. + * Some SD card readers can't handle multi-sector accesses which touch + * the last one or two hardware sectors. Split accesses as needed. */ - if (unlikely(sdp->last_sector_bug && - rq->nr_sectors > sdp->sector_size / 512 && - block + this_count == get_capacity(disk))) - this_count -= sdp->sector_size / 512; + threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS * + (sdp->sector_size / 512); + + if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) { + if (block < threshold) { + /* Access up to the threshold but not beyond */ + this_count = threshold - block; + } else { + /* Access only a single hardware sector */ + this_count = sdp->sector_size / 512; + } + } SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n", (unsigned long long)block)); diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 550b2f70a1f8..95b9f06534d5 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -31,6 +31,12 @@ */ #define SD_BUF_SIZE 512 +/* + * Number of sectors at the end of the device to avoid multi-sector + * accesses to in the case of last_sector_bug + */ +#define SD_LAST_BUGGY_SECTORS 8 + struct scsi_disk { struct scsi_driver *driver; /* always &sd_template */ struct scsi_device *device; diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 9cecc409f0f8..291d56a19167 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -140,7 +140,8 @@ struct scsi_device { unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */ unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */ unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */ - unsigned last_sector_bug:1; /* Always read last sector in a 1 sector read */ + unsigned last_sector_bug:1; /* do not use multisector accesses on + SD_LAST_BUGGY_SECTORS */ DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */ struct list_head event_list; /* asserted events */ -- cgit v1.2.3 From 0967d61ea0d8e8a7826bd8949cd93dd1e829ac55 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 5 Aug 2008 21:49:54 -0700 Subject: Linux 2.6.27-rc2 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index f156f40d6334..ea413fa03e4e 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 27 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Rotary Wombat # *DOCUMENTATION* -- cgit v1.2.3 From 26b994fad6a062697846a861ecc008447409dfb6 Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 6 Aug 2008 05:11:33 +0000 Subject: [CIFS] Code cleanup in old sessionsetup code Remove some long lines Signed-off-by: Steve French --- fs/cifs/CHANGES | 8 +++ fs/cifs/connect.c | 150 ++++++++++++++++++++++++++---------------------------- 2 files changed, 80 insertions(+), 78 deletions(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 1f3465201fdf..f5d0083e09fa 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -1,3 +1,11 @@ +Version 1.54 +------------ +Fix premature write failure on congested networks (we would give up +on EAGAIN from the socket too quickly on large writes). +Cifs_mkdir and cifs_create now respect the setgid bit on parent dir. +Fix endian problems in acl (mode from/to cifs acl) on bigendian +architectures. + Version 1.53 ------------ DFS support added (Microsoft Distributed File System client support needed diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 34a1fc9dabf5..ff4345db7201 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3620,97 +3620,91 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo, } first_time = 1; } - if (!rc) { - pSesInfo->flags = 0; - pSesInfo->capabilities = pSesInfo->server->capabilities; - if (linuxExtEnabled == 0) - pSesInfo->capabilities &= (~CAP_UNIX); + + if (rc) + goto ss_err_exit; + + pSesInfo->flags = 0; + pSesInfo->capabilities = pSesInfo->server->capabilities; + if (linuxExtEnabled == 0) + pSesInfo->capabilities &= (~CAP_UNIX); /* pSesInfo->sequence_number = 0;*/ - cFYI(1, - ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d", - pSesInfo->server->secMode, - pSesInfo->server->capabilities, - pSesInfo->server->timeAdj)); - if (experimEnabled < 2) - rc = CIFS_SessSetup(xid, pSesInfo, - first_time, nls_info); - else if (extended_security - && (pSesInfo->capabilities - & CAP_EXTENDED_SECURITY) - && (pSesInfo->server->secType == NTLMSSP)) { - rc = -EOPNOTSUPP; - } else if (extended_security - && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY) - && (pSesInfo->server->secType == RawNTLMSSP)) { - cFYI(1, ("NTLMSSP sesssetup")); - rc = CIFSNTLMSSPNegotiateSessSetup(xid, - pSesInfo, - &ntlmv2_flag, - nls_info); - if (!rc) { - if (ntlmv2_flag) { - char *v2_response; - cFYI(1, ("more secure NTLM ver2 hash")); - if (CalcNTLMv2_partial_mac_key(pSesInfo, - nls_info)) { - rc = -ENOMEM; - goto ss_err_exit; - } else - v2_response = kmalloc(16 + 64 /* blob */, GFP_KERNEL); - if (v2_response) { - CalcNTLMv2_response(pSesInfo, - v2_response); - /* if (first_time) - cifs_calculate_ntlmv2_mac_key( - pSesInfo->server->mac_signing_key, - response, ntlm_session_key,*/ - kfree(v2_response); + cFYI(1, ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d", + pSesInfo->server->secMode, + pSesInfo->server->capabilities, + pSesInfo->server->timeAdj)); + if (experimEnabled < 2) + rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info); + else if (extended_security + && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY) + && (pSesInfo->server->secType == NTLMSSP)) { + rc = -EOPNOTSUPP; + } else if (extended_security + && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY) + && (pSesInfo->server->secType == RawNTLMSSP)) { + cFYI(1, ("NTLMSSP sesssetup")); + rc = CIFSNTLMSSPNegotiateSessSetup(xid, pSesInfo, &ntlmv2_flag, + nls_info); + if (!rc) { + if (ntlmv2_flag) { + char *v2_response; + cFYI(1, ("more secure NTLM ver2 hash")); + if (CalcNTLMv2_partial_mac_key(pSesInfo, + nls_info)) { + rc = -ENOMEM; + goto ss_err_exit; + } else + v2_response = kmalloc(16 + 64 /* blob*/, + GFP_KERNEL); + if (v2_response) { + CalcNTLMv2_response(pSesInfo, + v2_response); + /* if (first_time) + cifs_calculate_ntlmv2_mac_key */ + kfree(v2_response); /* BB Put dummy sig in SessSetup PDU? */ - } else { - rc = -ENOMEM; - goto ss_err_exit; - } - } else { - SMBNTencrypt(pSesInfo->password, - pSesInfo->server->cryptKey, - ntlm_session_key); - - if (first_time) - cifs_calculate_mac_key( - &pSesInfo->server->mac_signing_key, - ntlm_session_key, - pSesInfo->password); + rc = -ENOMEM; + goto ss_err_exit; } + + } else { + SMBNTencrypt(pSesInfo->password, + pSesInfo->server->cryptKey, + ntlm_session_key); + + if (first_time) + cifs_calculate_mac_key( + &pSesInfo->server->mac_signing_key, + ntlm_session_key, + pSesInfo->password); + } /* for better security the weaker lanman hash not sent in AuthSessSetup so we no longer calculate it */ - rc = CIFSNTLMSSPAuthSessSetup(xid, - pSesInfo, - ntlm_session_key, - ntlmv2_flag, - nls_info); - } - } else { /* old style NTLM 0.12 session setup */ - SMBNTencrypt(pSesInfo->password, - pSesInfo->server->cryptKey, - ntlm_session_key); + rc = CIFSNTLMSSPAuthSessSetup(xid, pSesInfo, + ntlm_session_key, + ntlmv2_flag, + nls_info); + } + } else { /* old style NTLM 0.12 session setup */ + SMBNTencrypt(pSesInfo->password, pSesInfo->server->cryptKey, + ntlm_session_key); - if (first_time) - cifs_calculate_mac_key( + if (first_time) + cifs_calculate_mac_key( &pSesInfo->server->mac_signing_key, ntlm_session_key, pSesInfo->password); - rc = CIFSSessSetup(xid, pSesInfo, - ntlm_session_key, nls_info); - } - if (rc) { - cERROR(1, ("Send error in SessSetup = %d", rc)); - } else { - cFYI(1, ("CIFS Session Established successfully")); + rc = CIFSSessSetup(xid, pSesInfo, ntlm_session_key, nls_info); + } + if (rc) { + cERROR(1, ("Send error in SessSetup = %d", rc)); + } else { + cFYI(1, ("CIFS Session Established successfully")); pSesInfo->status = CifsGood; - } } + ss_err_exit: return rc; } -- cgit v1.2.3 From 778307d372555f979cf6cef112a6d7fbff056cd9 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 6 Aug 2008 17:05:20 +0800 Subject: Blackfin arch: remove support for Anomaly 05000125 as it doesnt exist on any supported processor/silicon Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf527/head.S | 19 ------ arch/blackfin/mach-bf533/head.S | 18 ----- arch/blackfin/mach-bf537/head.S | 39 +---------- arch/blackfin/mach-bf561/head.S | 17 ----- arch/blackfin/mach-common/Makefile | 2 +- arch/blackfin/mach-common/cacheinit.S | 77 ---------------------- include/asm-blackfin/mach-common/cdef_LPBlackfin.h | 8 --- 7 files changed, 2 insertions(+), 178 deletions(-) delete mode 100644 arch/blackfin/mach-common/cacheinit.S diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S index fe05cc1ef174..a16a26575280 100644 --- a/arch/blackfin/mach-bf527/head.S +++ b/arch/blackfin/mach-bf527/head.S @@ -105,17 +105,8 @@ ENTRY(__start) R1 = [p0]; R0 = ~ENICPLB; R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif [p0] = R0; SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif /* Turn off the dcache */ p0.l = LO(DMEM_CONTROL); @@ -123,18 +114,8 @@ ENTRY(__start) R1 = [p0]; R0 = ~ENDCPLB; R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif [p0] = R0; SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - #if defined(CONFIG_BF527) p0.h = hi(EMAC_SYSTAT); diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index c671e8549b17..fb49169c0e7b 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -116,17 +116,8 @@ ENTRY(__start) R1 = [p0]; R0 = ~ENICPLB; R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif [p0] = R0; SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif /* Turn off the dcache */ p0.l = LO(DMEM_CONTROL); @@ -134,17 +125,8 @@ ENTRY(__start) R1 = [p0]; R0 = ~ENDCPLB; R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif [p0] = R0; SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif /* Initialise UART - when booting from u-boot, the UART is not disabled * so if we dont initalize here, our serial console gets hosed */ diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 6b019eaee0b6..5bc89bbb89d0 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -105,17 +105,8 @@ ENTRY(__start) R1 = [p0]; R0 = ~ENICPLB; R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif [p0] = R0; SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif /* Turn off the dcache */ p0.l = LO(DMEM_CONTROL); @@ -123,48 +114,20 @@ ENTRY(__start) R1 = [p0]; R0 = ~ENDCPLB; R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif [p0] = R0; SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif /* Initialise General-Purpose I/O Modules on BF537 */ - /* Rev 0.0 Anomaly 05000212 - PORTx_FER, - * PORT_MUX Registers Do Not accept "writes" correctly: - */ p0.h = hi(BFIN_PORT_MUX); p0.l = lo(BFIN_PORT_MUX); -#if ANOMALY_05000212 - R0.L = W[P0]; /* Read */ - SSYNC; -#endif R0 = (PGDE_UART | PFTE_UART)(Z); -#if ANOMALY_05000212 - W[P0] = R0.L; /* Write */ - SSYNC; -#endif W[P0] = R0.L; /* Enable both UARTS */ SSYNC; + /* Enable peripheral function of PORTF for UART0 and UART1 */ p0.h = hi(PORTF_FER); p0.l = lo(PORTF_FER); -#if ANOMALY_05000212 - R0.L = W[P0]; /* Read */ - SSYNC; -#endif R0 = 0x000F(Z); -#if ANOMALY_05000212 - W[P0] = R0.L; /* Write */ - SSYNC; -#endif - /* Enable peripheral function of PORTF for UART0 and UART1 */ W[P0] = R0.L; SSYNC; diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index cf1a2dff01e7..0a1443b6b462 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -105,16 +105,8 @@ ENTRY(__start) R1 = [p0]; R0 = ~ENICPLB; R0 = R0 & R1; - -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif [p0] = R0; SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif /* Turn off the dcache */ p0.l = LO(DMEM_CONTROL); @@ -122,17 +114,8 @@ ENTRY(__start) R1 = [p0]; R0 = ~ENDCPLB; R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif [p0] = R0; SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif /* Initialise UART - when booting from u-boot, the UART is not disabled * so if we dont initalize here, our serial console gets hosed */ diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 422bfee34adc..5e6b20e423d6 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -3,7 +3,7 @@ # obj-y := \ - cache.o cacheinit.o entry.o \ + cache.o entry.o \ interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o obj-$(CONFIG_PM) += pm.o dpmc_modes.o diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S deleted file mode 100644 index 22fada0c1cb3..000000000000 --- a/arch/blackfin/mach-common/cacheinit.S +++ /dev/null @@ -1,77 +0,0 @@ -/* - * File: arch/blackfin/mach-common/cacheinit.S - * Based on: - * Author: LG Soft India - * - * Created: ? - * Description: cache initialization - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This function sets up the data and instruction cache. The - * tables like icplb table, dcplb table and Page Descriptor table - * are defined in cplbtab.h. You can configure those tables for - * your suitable requirements - */ - -#include -#include - -.text - -#if ANOMALY_05000125 -#if defined(CONFIG_BFIN_ICACHE) -ENTRY(_bfin_write_IMEM_CONTROL) - - /* Enable Instruction Cache */ - P0.l = LO(IMEM_CONTROL); - P0.h = HI(IMEM_CONTROL); - - /* Anomaly 05000125 */ - CLI R1; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P0] = R0; - SSYNC; - STI R1; - RTS; - -ENDPROC(_bfin_write_IMEM_CONTROL) -#endif - -#if defined(CONFIG_BFIN_DCACHE) -ENTRY(_bfin_write_DMEM_CONTROL) - P0.l = LO(DMEM_CONTROL); - P0.h = HI(DMEM_CONTROL); - - CLI R1; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ - .align 8; - [P0] = R0; - SSYNC; - STI R1; - RTS; - -ENDPROC(_bfin_write_DMEM_CONTROL) -#endif - -#endif diff --git a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h index ede210eca4ec..d39c396f850d 100644 --- a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h +++ b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h @@ -39,11 +39,7 @@ #define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS) #define bfin_write_SRAM_BASE_ADDRESS(val) bfin_write32(SRAM_BASE_ADDRESS,val) #define bfin_read_DMEM_CONTROL() bfin_read32(DMEM_CONTROL) -#if ANOMALY_05000125 -extern void bfin_write_DMEM_CONTROL(unsigned int val); -#else #define bfin_write_DMEM_CONTROL(val) bfin_write32(DMEM_CONTROL,val) -#endif #define bfin_read_DCPLB_STATUS() bfin_read32(DCPLB_STATUS) #define bfin_write_DCPLB_STATUS(val) bfin_write32(DCPLB_STATUS,val) #define bfin_read_DCPLB_FAULT_ADDR() bfin_read32(DCPLB_FAULT_ADDR) @@ -129,11 +125,7 @@ extern void bfin_write_DMEM_CONTROL(unsigned int val); #define DTEST_DATA3 0xFFE0040C */ #define bfin_read_IMEM_CONTROL() bfin_read32(IMEM_CONTROL) -#if ANOMALY_05000125 -extern void bfin_write_IMEM_CONTROL(unsigned int val); -#else #define bfin_write_IMEM_CONTROL(val) bfin_write32(IMEM_CONTROL,val) -#endif #define bfin_read_ICPLB_STATUS() bfin_read32(ICPLB_STATUS) #define bfin_write_ICPLB_STATUS(val) bfin_write32(ICPLB_STATUS,val) #define bfin_read_ICPLB_FAULT_ADDR() bfin_read32(ICPLB_FAULT_ADDR) -- cgit v1.2.3 From 09e1f70e31ed6ca23dd42feb10aa104fc1b04c40 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 6 Aug 2008 17:15:27 +0800 Subject: Blackfin arch: unify the duplicated _real_start functions Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf527/head.S | 70 ----------------------------------- arch/blackfin/mach-bf533/head.S | 70 ----------------------------------- arch/blackfin/mach-bf537/head.S | 70 ----------------------------------- arch/blackfin/mach-bf548/head.S | 73 ------------------------------------ arch/blackfin/mach-bf561/head.S | 70 ----------------------------------- arch/blackfin/mach-common/Makefile | 2 +- arch/blackfin/mach-common/head.S | 76 ++++++++++++++++++++++++++++++++++++++ 7 files changed, 77 insertions(+), 354 deletions(-) create mode 100644 arch/blackfin/mach-common/head.S diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S index a16a26575280..180d3c85a4c1 100644 --- a/arch/blackfin/mach-bf527/head.S +++ b/arch/blackfin/mach-bf527/head.S @@ -226,76 +226,6 @@ ENTRY(__start) jump .LWAIT_HERE; ENDPROC(__start) -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOG_CTL); - p0.h = hi(WDOG_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - jump.l _start_kernel; -ENDPROC(_real_start) - __FINIT .section .l1.text diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index fb49169c0e7b..0ffbe7a205ba 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -228,76 +228,6 @@ ENTRY(__start) jump .LWAIT_HERE; ENDPROC(__start) -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOG_CTL); - p0.h = hi(WDOG_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - jump.l _start_kernel; -ENDPROC(_real_start) - __FINIT .section .l1.text diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 5bc89bbb89d0..c11f0fd82255 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -240,76 +240,6 @@ ENTRY(__start) jump .LWAIT_HERE; ENDPROC(__start) -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOG_CTL); - p0.h = hi(WDOG_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - jump.l _start_kernel; -ENDPROC(_real_start) - __FINIT .section .l1.text diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 06b9178cfcfe..96fbdb790a98 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -212,79 +212,6 @@ ENTRY(__start) jump .LWAIT_HERE; ENDPROC(__start) -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOG_CTL); - p0.h = hi(WDOG_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - call _start_kernel; -.L_exit: - jump.s .L_exit; -ENDPROC(_real_start) - __FINIT .section .l1.text diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 0a1443b6b462..553b2d149d71 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -217,76 +217,6 @@ ENTRY(__start) jump .LWAIT_HERE; ENDPROC(__start) -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOGA_CTL); - p0.h = hi(WDOGA_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - jump.l _start_kernel; -ENDPROC(_real_start) - __FINIT .section .l1.text diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 5e6b20e423d6..862cd73c9504 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -3,7 +3,7 @@ # obj-y := \ - cache.o entry.o \ + cache.o entry.o head.o \ interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o obj-$(CONFIG_PM) += pm.o dpmc_modes.o diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S new file mode 100644 index 000000000000..8514da587557 --- /dev/null +++ b/arch/blackfin/mach-common/head.S @@ -0,0 +1,76 @@ +/* + * Common Blackfin startup code + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include + +/* A little BF561 glue ... */ +#ifndef WDOG_CTL +# define WDOG_CTL WDOGA_CTL +#endif + +__INIT + +ENTRY(_real_start) + /* Enable nested interrupts */ + [--sp] = reti; + + /* watchdog off for now */ + p0.l = lo(WDOG_CTL); + p0.h = hi(WDOG_CTL); + r0 = 0xAD6(z); + w[p0] = r0; + ssync; + + /* Zero out the bss region + * Note: this will fail if bss is 0 bytes ... + */ + r0 = 0 (z); + r1.l = ___bss_start; + r1.h = ___bss_start; + r2.l = ___bss_stop; + r2.h = ___bss_stop; + r2 = r2 - r1; + r2 >>= 2; + p1 = r1; + p2 = r2; + lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; +.L_clear_bss: + [p1++] = r0; + + /* In case there is a NULL pointer reference, + * zero out region before stext + */ + p1 = r0; + r2.l = __stext; + r2.h = __stext; + r2 >>= 2; + p2 = r2; + lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; +.L_clear_zero: + [p1++] = r0; + + /* Pass the u-boot arguments to the global value command line */ + R0 = R7; + call _cmdline_init; + + /* Load the current thread pointer and stack */ + sp.l = _init_thread_union; + sp.h = _init_thread_union; + p1 = THREAD_SIZE (z); + sp = sp + p1; + usp = sp; + fp = sp; + jump.l _start_kernel; +ENDPROC(_real_start) + +__FINIT -- cgit v1.2.3 From 1375204611f417541e55ee09e248acdbbb94356d Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 6 Aug 2008 17:10:57 +0800 Subject: Blackfin arch: make sure the BSS and kernel load address are 4 byte aligned Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/vmlinux.lds.S | 1 + arch/blackfin/mach-common/arch_checks.c | 9 +++++++++ 2 files changed, 10 insertions(+) diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 0896e38d6108..d062597e6217 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -83,6 +83,7 @@ SECTIONS #if !L1_DATA_B_LENGTH *(.l1.bss.B) #endif + . = ALIGN(4); ___bss_stop = .; } diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index f9160d83b91f..5986758b2752 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -27,6 +27,7 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include #include #include @@ -53,3 +54,11 @@ # endif #endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +#if CONFIG_BOOT_LOAD < FIXED_CODE_END +# error "The kernel load address must be after the fixed code section" +#endif + +#if (CONFIG_BOOT_LOAD & 0x3) +# error "The kernel load address must be 4 byte aligned" +#endif -- cgit v1.2.3 From 7e64acabfdb530b1b7d3db2592d75d102827baf3 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 6 Aug 2008 17:17:10 +0800 Subject: Blackfin arch: move async memory programming into common setup_arch() as the banks dont really need to be setup fully as early as head.S Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 10 ++++++++++ arch/blackfin/mach-bf527/head.S | 22 --------------------- arch/blackfin/mach-bf533/head.S | 22 --------------------- arch/blackfin/mach-bf537/head.S | 22 --------------------- arch/blackfin/mach-bf548/head.S | 42 ----------------------------------------- arch/blackfin/mach-bf561/head.S | 22 --------------------- 6 files changed, 10 insertions(+), 130 deletions(-) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 23e637eb78da..15967e7578cd 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -738,6 +738,16 @@ void __init setup_arch(char **cmdline_p) memory_setup(); + /* Initialize Async memory banks */ + bfin_write_EBIU_AMBCTL0(AMBCTL0VAL); + bfin_write_EBIU_AMBCTL1(AMBCTL1VAL); + bfin_write_EBIU_AMGCTL(AMGCTLVAL); +#ifdef CONFIG_EBIU_MBSCTLVAL + bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTLVAL); + bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL); + bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL); +#endif + cclk = get_cclk(); sclk = get_sclk(); diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S index 180d3c85a4c1..9173dcecd158 100644 --- a/arch/blackfin/mach-bf527/head.S +++ b/arch/blackfin/mach-bf527/head.S @@ -170,28 +170,6 @@ ENTRY(__start) call _start_dma_code; #endif - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - /* This section keeps the processor in supervisor mode * during kernel boot. Switches to user mode at end of boot. * See page 3-9 of Hardware Reference manual for documentation. diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 0ffbe7a205ba..7f0a7a0c6fd6 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -172,28 +172,6 @@ ENTRY(__start) call _start_dma_code; #endif - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - /* This section keeps the processor in supervisor mode * during kernel boot. Switches to user mode at end of boot. * See page 3-9 of Hardware Reference manual for documentation. diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index c11f0fd82255..c062acb04836 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -184,28 +184,6 @@ ENTRY(__start) call _start_dma_code; #endif - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - /* This section keeps the processor in supervisor mode * during kernel boot. Switches to user mode at end of boot. * See page 3-9 of Hardware Reference manual for documentation. diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 96fbdb790a98..832a8d7212ac 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -133,48 +133,6 @@ ENTRY(__start) #ifdef CONFIG_BFIN_KERNEL_CLOCK call _start_dma_code; #endif - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - p2.h = hi(EBIU_MBSCTL); - p2.l = lo(EBIU_MBSCTL); - r0.h = hi(CONFIG_EBIU_MBSCTLVAL); - r0.l = lo(CONFIG_EBIU_MBSCTLVAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_MODE); - p2.l = lo(EBIU_MODE); - r0.h = hi(CONFIG_EBIU_MODEVAL); - r0.l = lo(CONFIG_EBIU_MODEVAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_FCTL); - p2.l = lo(EBIU_FCTL); - r0.h = hi(CONFIG_EBIU_FCTLVAL); - r0.l = lo(CONFIG_EBIU_FCTLVAL); - [p2] = r0; - ssync; /* This section keeps the processor in supervisor mode * during kernel boot. Switches to user mode at end of boot. diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 553b2d149d71..c541b312c25d 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -161,28 +161,6 @@ ENTRY(__start) call _start_dma_code; #endif - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - /* This section keeps the processor in supervisor mode * during kernel boot. Switches to user mode at end of boot. * See page 3-9 of Hardware Reference manual for documentation. -- cgit v1.2.3 From 67618fd8748a5d83f6bdcd578c8e748c3f47c4d4 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 6 Aug 2008 17:18:31 +0800 Subject: Blackfin arch: add asm/thread_info.h for THREAD_SIZE define Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/head.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index 8514da587557..6a989a031ed6 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -11,6 +11,7 @@ #include #include #include +#include #include /* A little BF561 glue ... */ -- cgit v1.2.3 From 17e89bcfa12f71b840361da07fe6c2f9c48d0605 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 6 Aug 2008 17:23:50 +0800 Subject: Blackfin arch: unify the duplicated portions of __start and split mach-specific pieces into _mach_early_start where they will be easier to trim over time Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf527/head.S | 132 +------------------------------------ arch/blackfin/mach-bf533/head.S | 131 +------------------------------------ arch/blackfin/mach-bf537/head.S | 132 +------------------------------------ arch/blackfin/mach-bf548/head.S | 133 +------------------------------------- arch/blackfin/mach-bf561/head.S | 136 ++------------------------------------- arch/blackfin/mach-common/head.S | 131 ++++++++++++++++++++++++++++++++++++- 6 files changed, 146 insertions(+), 649 deletions(-) diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S index 9173dcecd158..af20183d0d94 100644 --- a/arch/blackfin/mach-bf527/head.S +++ b/arch/blackfin/mach-bf527/head.S @@ -30,93 +30,16 @@ #include #include #include -#include - #ifdef CONFIG_BFIN_KERNEL_CLOCK #include #include #endif -.extern ___bss_stop -.extern ___bss_start .extern _bf53x_relocate_l1_mem -#define INITIAL_STACK 0xFFB01000 - __INIT -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers */ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers */ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - [p0] = R0; - SSYNC; - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - [p0] = R0; - SSYNC; - +ENTRY(_mach_early_start) #if defined(CONFIG_BF527) p0.h = hi(EMAC_SYSTAT); p0.l = lo(EMAC_SYSTAT); @@ -152,57 +75,8 @@ ENTRY(__start) w[p0] = r0.L; /* To enable UART clock */ ssync; - /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); - fp = sp; - usp = sp; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#ifdef CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; nop; nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) + rts; +ENDPROC(_mach_early_start) __FINIT diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 7f0a7a0c6fd6..6603967367ec 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -30,74 +30,16 @@ #include #include #include -#include #ifdef CONFIG_BFIN_KERNEL_CLOCK #include #include #endif -.extern ___bss_stop -.extern ___bss_start .extern _bf53x_relocate_l1_mem -#define INITIAL_STACK 0xFFB01000 - __INIT -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers */ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers */ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - +ENTRY(_mach_early_start) p0.h = hi(FIO_MASKA_C); p0.l = lo(FIO_MASKA_C); r0 = 0xFFFF(Z); @@ -110,24 +52,6 @@ ENTRY(__start) w[p0] = r0.L; /* Disable all interrupts */ ssync; - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - [p0] = R0; - SSYNC; - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - [p0] = R0; - SSYNC; - /* Initialise UART - when booting from u-boot, the UART is not disabled * so if we dont initalize here, our serial console gets hosed */ p0.h = hi(BFIN_UART_LCR); @@ -154,57 +78,8 @@ ENTRY(__start) w[p0] = r0.L; /* To enable UART clock */ ssync; - /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); - fp = sp; - usp = sp; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#ifdef CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; nop; nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) + rts; +ENDPROC(_mach_early_start) __FINIT diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index c062acb04836..6a02e472587a 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -30,93 +30,16 @@ #include #include #include -#include - #ifdef CONFIG_BFIN_KERNEL_CLOCK #include #include #endif -.extern ___bss_stop -.extern ___bss_start .extern _bf53x_relocate_l1_mem -#define INITIAL_STACK 0xFFB01000 - __INIT -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers */ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers */ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - [p0] = R0; - SSYNC; - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - [p0] = R0; - SSYNC; - +ENTRY(_mach_early_start) /* Initialise General-Purpose I/O Modules on BF537 */ p0.h = hi(BFIN_PORT_MUX); p0.l = lo(BFIN_PORT_MUX); @@ -166,57 +89,8 @@ ENTRY(__start) w[p0] = r0.L; /* To enable UART clock */ ssync; - /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); - fp = sp; - usp = sp; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#ifdef CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; nop; nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) + rts; +ENDPROC(_mach_early_start) __FINIT diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 832a8d7212ac..cf94e1e222b8 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -30,145 +30,18 @@ #include #include #include -#include #ifdef CONFIG_BFIN_KERNEL_CLOCK #include #include #endif -.extern ___bss_stop -.extern ___bss_start .extern _bf53x_relocate_l1_mem -#define INITIAL_STACK 0xFFB01000 - __INIT -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers*/ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers*/ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - [p0] = R0; - SSYNC; - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - [p0] = R0; - SSYNC; - - /* Initialize stack pointer */ - SP.L = LO(INITIAL_STACK); - SP.H = HI(INITIAL_STACK); - FP = SP; - USP = SP; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#ifdef CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; - nop; - nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) +ENTRY(_mach_early_start) + rts; +ENDPROC(_mach_early_start) __FINIT diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index c541b312c25d..fe6f979947c6 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -30,93 +30,16 @@ #include #include #include -#include - -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK #include #include #endif -.extern ___bss_stop -.extern ___bss_start .extern _bf53x_relocate_l1_mem -#define INITIAL_STACK 0xFFB01000 - __INIT -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers */ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers */ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - [p0] = R0; - SSYNC; - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - [p0] = R0; - SSYNC; - +ENTRY(_mach_early_start) /* Initialise UART - when booting from u-boot, the UART is not disabled * so if we dont initalize here, our serial console gets hosed */ p0.h = hi(BFIN_UART_LCR); @@ -143,62 +66,13 @@ ENTRY(__start) w[p0] = r0.L; /* To enable UART clock */ ssync; - /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); - fp = sp; - usp = sp; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#if CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; nop; nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) + rts; +ENDPROC(_mach_early_start) __FINIT .section .l1.text -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) p0.h = hi(SICA_IWR0); p0.l = lo(SICA_IWR0); diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index 6a989a031ed6..2c69ad49894e 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -14,13 +14,140 @@ #include #include +__INIT + +#define INITIAL_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) + +ENTRY(__start) + /* R0: argument of command line string, passed from uboot, save it */ + R7 = R0; + /* Enable Cycle Counter and Nesting Of Interrupts */ +#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES + R0 = SYSCFG_SNEN; +#else + R0 = SYSCFG_SNEN | SYSCFG_CCEN; +#endif + SYSCFG = R0; + R0 = 0; + + /* Clear Out All the data and pointer Registers */ + R1 = R0; + R2 = R0; + R3 = R0; + R4 = R0; + R5 = R0; + R6 = R0; + + P0 = R0; + P1 = R0; + P2 = R0; + P3 = R0; + P4 = R0; + P5 = R0; + + LC0 = r0; + LC1 = r0; + L0 = r0; + L1 = r0; + L2 = r0; + L3 = r0; + + /* Clear Out All the DAG Registers */ + B0 = r0; + B1 = r0; + B2 = r0; + B3 = r0; + + I0 = r0; + I1 = r0; + I2 = r0; + I3 = r0; + + M0 = r0; + M1 = r0; + M2 = r0; + M3 = r0; + + trace_buffer_init(p0,r0); + P0 = R1; + R0 = R1; + + /* Turn off the icache */ + p0.l = LO(IMEM_CONTROL); + p0.h = HI(IMEM_CONTROL); + R1 = [p0]; + R0 = ~ENICPLB; + R0 = R0 & R1; + [p0] = R0; + SSYNC; + + /* Turn off the dcache */ + p0.l = LO(DMEM_CONTROL); + p0.h = HI(DMEM_CONTROL); + R1 = [p0]; + R0 = ~ENDCPLB; + R0 = R0 & R1; + [p0] = R0; + SSYNC; + + /* Let each Blackfin family do its own thing */ + call _mach_early_start; + + /* Initialize stack pointer */ + sp.l = lo(INITIAL_STACK); + sp.h = hi(INITIAL_STACK); + fp = sp; + usp = sp; + +#ifdef CONFIG_EARLY_PRINTK + call _init_early_exception_vectors; +#endif + + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ + call _bf53x_relocate_l1_mem; +#ifdef CONFIG_BFIN_KERNEL_CLOCK + call _start_dma_code; +#endif + + /* This section keeps the processor in supervisor mode + * during kernel boot. Switches to user mode at end of boot. + * See page 3-9 of Hardware Reference manual for documentation. + */ + + /* EVT15 = _real_start */ + + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _real_start; + p1.h = _real_start; + [p0] = p1; + csync; + + p0.l = lo(IMASK); + p0.h = hi(IMASK); + p1.l = IMASK_IVG15; + p1.h = 0x0; + [p0] = p1; + csync; + + raise 15; + p0.l = .LWAIT_HERE; + p0.h = .LWAIT_HERE; + reti = p0; +#if ANOMALY_05000281 + nop; nop; nop; +#endif + rti; + +.LWAIT_HERE: + jump .LWAIT_HERE; +ENDPROC(__start) + /* A little BF561 glue ... */ #ifndef WDOG_CTL # define WDOG_CTL WDOGA_CTL #endif -__INIT - ENTRY(_real_start) /* Enable nested interrupts */ [--sp] = reti; -- cgit v1.2.3 From 6d273f8d011c351c9603c1dbfeae2c7458edd30d Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Wed, 6 Aug 2008 02:33:49 -0700 Subject: ipv4: replace dst_metric() with dst_mtu() in net/ipv4/route.c. This patch replaces dst_metric() with dst_mtu() in net/ipv4/route.c. Signed-off-by: Rami Rosen Signed-off-by: David S. Miller --- net/ipv4/route.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 1bfa078ddbd0..eccb61889dfe 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1509,14 +1509,14 @@ unsigned short ip_rt_frag_needed(struct net *net, struct iphdr *iph, /* BSD 4.2 compatibility hack :-( */ if (mtu == 0 && - old_mtu >= dst_metric(&rth->u.dst, RTAX_MTU) && + old_mtu >= dst_mtu(&rth->u.dst) && old_mtu >= 68 + (iph->ihl << 2)) old_mtu -= iph->ihl << 2; mtu = guess_mtu(old_mtu); } - if (mtu <= dst_metric(&rth->u.dst, RTAX_MTU)) { - if (mtu < dst_metric(&rth->u.dst, RTAX_MTU)) { + if (mtu <= dst_mtu(&rth->u.dst)) { + if (mtu < dst_mtu(&rth->u.dst)) { dst_confirm(&rth->u.dst); if (mtu < ip_rt_min_pmtu) { mtu = ip_rt_min_pmtu; @@ -1538,7 +1538,7 @@ unsigned short ip_rt_frag_needed(struct net *net, struct iphdr *iph, static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu) { - if (dst_metric(dst, RTAX_MTU) > mtu && mtu >= 68 && + if (dst_mtu(dst) > mtu && mtu >= 68 && !(dst_metric_locked(dst, RTAX_MTU))) { if (mtu < ip_rt_min_pmtu) { mtu = ip_rt_min_pmtu; @@ -1667,7 +1667,7 @@ static void rt_set_nexthop(struct rtable *rt, struct fib_result *res, u32 itag) if (dst_metric(&rt->u.dst, RTAX_HOPLIMIT) == 0) rt->u.dst.metrics[RTAX_HOPLIMIT-1] = sysctl_ip_default_ttl; - if (dst_metric(&rt->u.dst, RTAX_MTU) > IP_MAX_MTU) + if (dst_mtu(&rt->u.dst) > IP_MAX_MTU) rt->u.dst.metrics[RTAX_MTU-1] = IP_MAX_MTU; if (dst_metric(&rt->u.dst, RTAX_ADVMSS) == 0) rt->u.dst.metrics[RTAX_ADVMSS-1] = max_t(unsigned int, rt->u.dst.dev->mtu - 40, -- cgit v1.2.3 From 1ca615fb816ba85dc765209a9b58ab82cc99bce0 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Wed, 6 Aug 2008 02:34:21 -0700 Subject: ipv6: replace dst_metric() with dst_mtu() in net/ipv6/route.c. This patch replaces dst_metric() with dst_mtu() in net/ipv6/route.c. Signed-off-by: Rami Rosen Signed-off-by: David S. Miller --- net/ipv6/route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 86540b24b27c..5a3e87e4b18f 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1249,7 +1249,7 @@ install_route: if (dst_metric(&rt->u.dst, RTAX_HOPLIMIT) == 0) rt->u.dst.metrics[RTAX_HOPLIMIT-1] = -1; - if (!dst_metric(&rt->u.dst, RTAX_MTU)) + if (!dst_mtu(&rt->u.dst)) rt->u.dst.metrics[RTAX_MTU-1] = ipv6_get_mtu(dev); if (!dst_metric(&rt->u.dst, RTAX_ADVMSS)) rt->u.dst.metrics[RTAX_ADVMSS-1] = ipv6_advmss(net, dst_mtu(&rt->u.dst)); -- cgit v1.2.3 From 9714be7da8b32f36d2468fe08ff603b6402df8cf Mon Sep 17 00:00:00 2001 From: Krzysztof Piotr Oledzki Date: Wed, 6 Aug 2008 02:35:44 -0700 Subject: netfilter: fix two recent sysctl problems Starting with 9043476f726802f4b00c96d0c4f418dde48d1304 ("[PATCH] sanitize proc_sysctl") we have two netfilter releated problems: - WARNING: at kernel/sysctl.c:1966 unregister_sysctl_table+0xcc/0x103(), caused by wrong order of ini/fini calls - net.netfilter is duplicated and has truncated set of records Thanks to very useful guidelines from Al Viro, this patch fixes both of them. Signed-off-by: Krzysztof Piotr Oledzki Acked-by: Al Viro Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_core.c | 6 +++--- net/netfilter/nf_conntrack_standalone.c | 28 +++++++++++++++++----------- 2 files changed, 20 insertions(+), 14 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index c519d090bdb9..9d1830da8e84 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1032,10 +1032,10 @@ void nf_conntrack_cleanup(void) nf_ct_free_hashtable(nf_conntrack_hash, nf_conntrack_vmalloc, nf_conntrack_htable_size); - nf_conntrack_proto_fini(); - nf_conntrack_helper_fini(); - nf_conntrack_expect_fini(); nf_conntrack_acct_fini(); + nf_conntrack_expect_fini(); + nf_conntrack_helper_fini(); + nf_conntrack_proto_fini(); } struct hlist_head *nf_ct_alloc_hashtable(unsigned int *sizep, int *vmalloced) diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index 869ef9349d0f..8509db14670b 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -324,6 +324,7 @@ static int log_invalid_proto_min = 0; static int log_invalid_proto_max = 255; static struct ctl_table_header *nf_ct_sysctl_header; +static struct ctl_table_header *nf_ct_netfilter_header; static ctl_table nf_ct_sysctl_table[] = { { @@ -383,12 +384,6 @@ static ctl_table nf_ct_sysctl_table[] = { #define NET_NF_CONNTRACK_MAX 2089 static ctl_table nf_ct_netfilter_table[] = { - { - .ctl_name = NET_NETFILTER, - .procname = "netfilter", - .mode = 0555, - .child = nf_ct_sysctl_table, - }, { .ctl_name = NET_NF_CONNTRACK_MAX, .procname = "nf_conntrack_max", @@ -409,18 +404,29 @@ EXPORT_SYMBOL_GPL(nf_ct_log_invalid); static int nf_conntrack_standalone_init_sysctl(void) { - nf_ct_sysctl_header = + nf_ct_netfilter_header = register_sysctl_paths(nf_ct_path, nf_ct_netfilter_table); - if (nf_ct_sysctl_header == NULL) { - printk("nf_conntrack: can't register to sysctl.\n"); - return -ENOMEM; - } + if (!nf_ct_netfilter_header) + goto out; + + nf_ct_sysctl_header = + register_sysctl_paths(nf_net_netfilter_sysctl_path, + nf_ct_sysctl_table); + if (!nf_ct_sysctl_header) + goto out_unregister_netfilter; + return 0; +out_unregister_netfilter: + unregister_sysctl_table(nf_ct_netfilter_header); +out: + printk("nf_conntrack: can't register to sysctl.\n"); + return -ENOMEM; } static void nf_conntrack_standalone_fini_sysctl(void) { + unregister_sysctl_table(nf_ct_netfilter_header); unregister_sysctl_table(nf_ct_sysctl_header); } #else -- cgit v1.2.3 From eb49e63093498cd17382018495b8cfb5b4a679bd Mon Sep 17 00:00:00 2001 From: Joakim Koskela Date: Wed, 6 Aug 2008 02:39:30 -0700 Subject: ipsec: Interfamily IPSec BEET Here's a revised version, based on Herbert's comments, of a fix for the ipv6-inner, ipv4-outer interfamily ipsec beet mode. It fixes the network header adjustment in interfamily, and doesn't reserve space for the pseudo header anymore when we have ipv6 as the inner family. Signed-off-by: Joakim Koskela Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv4/esp4.c | 2 +- net/ipv4/xfrm4_mode_beet.c | 6 ++++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c index 4e73e5708e70..21515d4c49eb 100644 --- a/net/ipv4/esp4.c +++ b/net/ipv4/esp4.c @@ -575,7 +575,7 @@ static int esp_init_state(struct xfrm_state *x) crypto_aead_ivsize(aead); if (x->props.mode == XFRM_MODE_TUNNEL) x->props.header_len += sizeof(struct iphdr); - else if (x->props.mode == XFRM_MODE_BEET) + else if (x->props.mode == XFRM_MODE_BEET && x->sel.family != AF_INET6) x->props.header_len += IPV4_BEET_PHMAXLEN; if (x->encap) { struct xfrm_encap_tmpl *encap = x->encap; diff --git a/net/ipv4/xfrm4_mode_beet.c b/net/ipv4/xfrm4_mode_beet.c index 9c798abce736..63418185f524 100644 --- a/net/ipv4/xfrm4_mode_beet.c +++ b/net/ipv4/xfrm4_mode_beet.c @@ -47,8 +47,10 @@ static int xfrm4_beet_output(struct xfrm_state *x, struct sk_buff *skb) if (unlikely(optlen)) hdrlen += IPV4_BEET_PHMAXLEN - (optlen & 4); - skb_set_network_header(skb, IPV4_BEET_PHMAXLEN - x->props.header_len - - hdrlen); + skb_set_network_header(skb, -x->props.header_len - + hdrlen + (XFRM_MODE_SKB_CB(skb)->ihl - sizeof(*top_iph))); + if (x->sel.family != AF_INET6) + skb->network_header += IPV4_BEET_PHMAXLEN; skb->mac_header = skb->network_header + offsetof(struct iphdr, protocol); skb->transport_header = skb->network_header + sizeof(*top_iph); -- cgit v1.2.3 From abf5cdb89d09ca981db10e1a85fd8531440165f2 Mon Sep 17 00:00:00 2001 From: Joakim Koskela Date: Wed, 6 Aug 2008 02:40:25 -0700 Subject: ipsec: Interfamily IPSec BEET, ipv4-inner ipv6-outer Here's a revised version, based on Herbert's comments, of a fix for the ipv4-inner, ipv6-outer interfamily ipsec beet mode. It fixes the network header adjustment during interfamily, as well as makes sure that we reserve enough room for the new ipv6 header if we might have something else as the inner family. Also, the ipv4 pseudo header construction was added. Signed-off-by: Joakim Koskela Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv6/esp6.c | 4 ++++ net/ipv6/xfrm6_mode_beet.c | 29 ++++++++++++++++++++++++++--- 2 files changed, 30 insertions(+), 3 deletions(-) diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c index c6bb4c6d24b3..b181b08fb761 100644 --- a/net/ipv6/esp6.c +++ b/net/ipv6/esp6.c @@ -521,6 +521,10 @@ static int esp6_init_state(struct xfrm_state *x) crypto_aead_ivsize(aead); switch (x->props.mode) { case XFRM_MODE_BEET: + if (x->sel.family != AF_INET6) + x->props.header_len += IPV4_BEET_PHMAXLEN + + (sizeof(struct ipv6hdr) - sizeof(struct iphdr)); + break; case XFRM_MODE_TRANSPORT: break; case XFRM_MODE_TUNNEL: diff --git a/net/ipv6/xfrm6_mode_beet.c b/net/ipv6/xfrm6_mode_beet.c index d6ce400f585f..bbd48b101bae 100644 --- a/net/ipv6/xfrm6_mode_beet.c +++ b/net/ipv6/xfrm6_mode_beet.c @@ -40,16 +40,39 @@ static void xfrm6_beet_make_header(struct sk_buff *skb) static int xfrm6_beet_output(struct xfrm_state *x, struct sk_buff *skb) { struct ipv6hdr *top_iph; - - skb_set_network_header(skb, -x->props.header_len); + struct ip_beet_phdr *ph; + struct iphdr *iphv4; + int optlen, hdr_len; + + iphv4 = ip_hdr(skb); + hdr_len = 0; + optlen = XFRM_MODE_SKB_CB(skb)->optlen; + if (unlikely(optlen)) + hdr_len += IPV4_BEET_PHMAXLEN - (optlen & 4); + + skb_set_network_header(skb, -x->props.header_len - hdr_len); + if (x->sel.family != AF_INET6) + skb->network_header += IPV4_BEET_PHMAXLEN; skb->mac_header = skb->network_header + offsetof(struct ipv6hdr, nexthdr); skb->transport_header = skb->network_header + sizeof(*top_iph); - __skb_pull(skb, XFRM_MODE_SKB_CB(skb)->ihl); + ph = (struct ip_beet_phdr *)__skb_pull(skb, XFRM_MODE_SKB_CB(skb)->ihl-hdr_len); xfrm6_beet_make_header(skb); top_iph = ipv6_hdr(skb); + if (unlikely(optlen)) { + + BUG_ON(optlen < 0); + + ph->padlen = 4 - (optlen & 4); + ph->hdrlen = optlen / 8; + ph->nexthdr = top_iph->nexthdr; + if (ph->padlen) + memset(ph + 1, IPOPT_NOP, ph->padlen); + + top_iph->nexthdr = IPPROTO_BEETPH; + } ipv6_addr_copy(&top_iph->saddr, (struct in6_addr *)&x->props.saddr); ipv6_addr_copy(&top_iph->daddr, (struct in6_addr *)&x->id.daddr); -- cgit v1.2.3 From 8c6a5cad1eec38c2bf3af94eb2d4350be29fa208 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Wed, 6 Aug 2008 02:43:24 -0700 Subject: sparc: i8042-sparcio.h: fix warning drivers/input/serio/i8042-sparcio.h:95: warning: 'sparc_i8042_driver' defined but not used Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller --- drivers/input/serio/i8042-sparcio.h | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h index d9ca55891cd7..66bafe308b0c 100644 --- a/drivers/input/serio/i8042-sparcio.h +++ b/drivers/input/serio/i8042-sparcio.h @@ -41,6 +41,8 @@ static inline void i8042_write_command(int val) writeb(val, kbd_iobase + 0x64UL); } +#ifdef CONFIG_PCI + #define OBP_PS2KBD_NAME1 "kb_ps2" #define OBP_PS2KBD_NAME2 "keyboard" #define OBP_PS2MS_NAME1 "kdmouse" @@ -101,9 +103,6 @@ static struct of_platform_driver sparc_i8042_driver = { static int __init i8042_platform_init(void) { -#ifndef CONFIG_PCI - return -ENODEV; -#else struct device_node *root = of_find_node_by_path("/"); if (!strcmp(root->name, "SUNW,JavaStation-1")) { @@ -131,17 +130,25 @@ static int __init i8042_platform_init(void) i8042_reset = 1; return 0; -#endif /* CONFIG_PCI */ } static inline void i8042_platform_exit(void) { -#ifdef CONFIG_PCI struct device_node *root = of_find_node_by_path("/"); if (strcmp(root->name, "SUNW,JavaStation-1")) of_unregister_driver(&sparc_i8042_driver); -#endif } +#else /* !CONFIG_PCI */ +static int __init i8042_platform_init(void) +{ + return -ENODEV; +} + +static inline void i8042_platform_exit(void) +{ +} +#endif /* !CONFIG_PCI */ + #endif /* _I8042_SPARCIO_H */ -- cgit v1.2.3 From 07aa7be5708afb3d9afa68f6f853c98e51bc64b3 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 13 Aug 2008 16:16:11 +0800 Subject: Blackfin arch: convert L2 defines to be the same as the L1 defines Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/cplb-nompu/cplbinit.c | 6 +----- arch/blackfin/kernel/setup.c | 14 +++++++------- arch/blackfin/kernel/traps.c | 2 +- arch/blackfin/kernel/vmlinux.lds.S | 10 ++++------ arch/blackfin/mm/blackfin_sram.c | 12 ++++++------ include/asm-blackfin/mach-bf527/mem_map.h | 5 +++++ include/asm-blackfin/mach-bf533/mem_map.h | 5 +++++ include/asm-blackfin/mach-bf537/mem_map.h | 5 +++++ 8 files changed, 34 insertions(+), 25 deletions(-) diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 224e7cc30bc5..728f708d3981 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -164,17 +164,13 @@ static struct cplb_desc cplb_data[] = { .name = "Asynchronous Memory Banks", }, { -#ifdef L2_START .start = L2_START, .end = L2_START + L2_LENGTH, .psize = SIZE_1M, .attr = SWITCH_T | I_CPLB | D_CPLB, .i_conf = L2_MEMORY, .d_conf = L2_MEMORY, - .valid = 1, -#else - .valid = 0, -#endif + .valid = (L2_LENGTH > 0), .name = "L2 Memory", }, { diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 15967e7578cd..936c06d820de 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -131,14 +131,14 @@ void __init bf53x_relocate_l1_mem(void) dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + l1_data_a_length, l1_data_b_length); -#ifdef L2_LENGTH - l2_length = _ebss_l2 - _stext_l2; - if (l2_length > L2_LENGTH) - panic("L2 SRAM Overflow\n"); + if (L2_LENGTH != 0) { + l2_length = _ebss_l2 - _stext_l2; + if (l2_length > L2_LENGTH) + panic("L2 SRAM Overflow\n"); - /* Copy _stext_l2 to _edata_l2 to L2 SRAM */ - dma_memcpy(_stext_l2, _l2_lma_start, l2_length); -#endif + /* Copy _stext_l2 to _edata_l2 to L2 SRAM */ + dma_memcpy(_stext_l2, _l2_lma_start, l2_length); + } } /* add_memory_region to memmap */ diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index ad922ab91543..62a47d67d876 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -567,7 +567,7 @@ bool get_instruction(unsigned short *val, unsigned short *address) * we don't read something in the async space that can hang forever */ if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) || -#ifdef L2_START +#if L2_LENGTH != 0 (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) || #endif (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) || diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index d062597e6217..7d12c6692a65 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -102,7 +102,7 @@ SECTIONS #if !L1_DATA_B_LENGTH *(.l1.data.B) #endif -#ifndef L2_LENGTH +#if !L2_LENGTH . = ALIGN(32); *(.data_l2.cacheline_aligned) *(.l2.data) @@ -212,20 +212,19 @@ SECTIONS __ebss_b_l1 = .; } -#ifdef L2_LENGTH __l2_lma_start = .; .text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1)) { . = ALIGN(4); __stext_l2 = .; - *(.l1.text) + *(.l2.text) . = ALIGN(4); __etext_l2 = .; . = ALIGN(4); __sdata_l2 = .; - *(.l1.data) + *(.l2.data) __edata_l2 = .; . = ALIGN(32); @@ -233,11 +232,10 @@ SECTIONS . = ALIGN(4); __sbss_l2 = .; - *(.l1.bss) + *(.l2.bss) . = ALIGN(4); __ebss_l2 = .; } -#endif /* Force trailing alignment of our init section so that when we * free our init memory, we don't leave behind a partial page. diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index 5af3c31c9365..9d2be43ac3da 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -66,7 +66,7 @@ static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head; static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head; #endif -#ifdef L2_LENGTH +#if L2_LENGTH != 0 static struct sram_piece free_l2_sram_head, used_l2_sram_head; #endif @@ -175,7 +175,7 @@ static void __init l1_inst_sram_init(void) static void __init l2_sram_init(void) { -#ifdef L2_LENGTH +#if L2_LENGTH != 0 free_l2_sram_head.next = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); if (!free_l2_sram_head.next) { @@ -367,7 +367,7 @@ int sram_free(const void *addr) && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH)) return l1_data_B_sram_free(addr); #endif -#ifdef L2_LENGTH +#if L2_LENGTH != 0 else if (addr >= (void *)L2_START && addr < (void *)(L2_START + L2_LENGTH)) return l2_sram_free(addr); @@ -604,7 +604,7 @@ int l1sram_free(const void *addr) void *l2_sram_alloc(size_t size) { -#ifdef L2_LENGTH +#if L2_LENGTH != 0 unsigned flags; void *addr; @@ -640,7 +640,7 @@ EXPORT_SYMBOL(l2_sram_zalloc); int l2_sram_free(const void *addr) { -#ifdef L2_LENGTH +#if L2_LENGTH != 0 unsigned flags; int ret; @@ -779,7 +779,7 @@ static int sram_proc_read(char *buf, char **start, off_t offset, int count, &free_l1_inst_sram_head, &used_l1_inst_sram_head)) goto not_done; #endif -#ifdef L2_LENGTH +#if L2_LENGTH != 0 if (_sram_proc_read(buf, &len, count, "L2", &free_l2_sram_head, &used_l2_sram_head)) goto not_done; diff --git a/include/asm-blackfin/mach-bf527/mem_map.h b/include/asm-blackfin/mach-bf527/mem_map.h index 193082deaa4e..ef46dc991cd4 100644 --- a/include/asm-blackfin/mach-bf527/mem_map.h +++ b/include/asm-blackfin/mach-bf527/mem_map.h @@ -89,6 +89,11 @@ #define BFIN_DSUPBANKS 0 #endif /*CONFIG_BFIN_DCACHE */ +/* Level 2 Memory - none */ + +#define L2_START 0 +#define L2_LENGTH 0 + /* Scratch Pad Memory */ #define L1_SCRATCH_START 0xFFB00000 diff --git a/include/asm-blackfin/mach-bf533/mem_map.h b/include/asm-blackfin/mach-bf533/mem_map.h index bd30b6f3be00..581fc6eea789 100644 --- a/include/asm-blackfin/mach-bf533/mem_map.h +++ b/include/asm-blackfin/mach-bf533/mem_map.h @@ -158,6 +158,11 @@ #endif +/* Level 2 Memory - none */ + +#define L2_START 0 +#define L2_LENGTH 0 + /* Scratch Pad Memory */ #define L1_SCRATCH_START 0xFFB00000 diff --git a/include/asm-blackfin/mach-bf537/mem_map.h b/include/asm-blackfin/mach-bf537/mem_map.h index 5c6726d6f3b1..5078b669431f 100644 --- a/include/asm-blackfin/mach-bf537/mem_map.h +++ b/include/asm-blackfin/mach-bf537/mem_map.h @@ -166,6 +166,11 @@ #endif +/* Level 2 Memory - none */ + +#define L2_START 0 +#define L2_LENGTH 0 + /* Scratch Pad Memory */ #define L1_SCRATCH_START 0xFFB00000 -- cgit v1.2.3 From 15b07536892284449ac5cd9488a8da1054b4295b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 13 Aug 2008 16:19:36 +0800 Subject: Blackfin arch: delete unused cache functions Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/cache.S | 115 -------------------------------------- 1 file changed, 115 deletions(-) diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index 0521b1588204..85f8c79b3c37 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -34,81 +34,6 @@ #include .text -.align 2 -ENTRY(_cache_invalidate) - - /* - * Icache or DcacheA or DcacheB Invalidation - * or any combination thereof - * R0 has bits - * CPLB_ENABLE_ICACHE_P,CPLB_ENABLE_DCACHE_P,CPLB_ENABLE_DCACHE2_P - * set as required - */ - [--SP] = R7; - - R7 = R0; - CC = BITTST(R7,CPLB_ENABLE_ICACHE_P); - IF !CC JUMP .Lno_icache; - [--SP] = RETS; - CALL _icache_invalidate; - RETS = [SP++]; -.Lno_icache: - CC = BITTST(R7,CPLB_ENABLE_DCACHE_P); - IF !CC JUMP .Lno_dcache_a; - R0 = 0; /* specifies bank A */ - [--SP] = RETS; - CALL _dcache_invalidate; - RETS = [SP++]; -.Lno_dcache_a: - CC = BITTST(R7,CPLB_ENABLE_DCACHE2_P); - IF !CC JUMP .Lno_dcache_b; - R0 = 0; - BITSET(R0, 23); /* specifies bank B */ - [--SP] = RETS; - CALL _dcache_invalidate; - RETS = [SP++]; -.Lno_dcache_b: - R7 = [SP++]; - RTS; -ENDPROC(_cache_invalidate) - -/* Invalidate the Entire Instruction cache by - * disabling IMC bit - */ -ENTRY(_icache_invalidate) -ENTRY(_invalidate_entire_icache) - [--SP] = ( R7:5); - - P0.L = LO(IMEM_CONTROL); - P0.H = HI(IMEM_CONTROL); - R7 = [P0]; - - /* Clear the IMC bit , All valid bits in the instruction - * cache are set to the invalid state - */ - BITCLR(R7,IMC_P); - CLI R6; - SSYNC; /* SSYNC required before invalidating cache. */ - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - /* Configures the instruction cache agian */ - R6 = (IMC | ENICPLB); - R7 = R7 | R6; - - CLI R6; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - ( R7:5) = [SP++]; - RTS; -ENDPROC(_invalidate_entire_icache) -ENDPROC(_icache_invalidate) /* * blackfin_cache_flush_range(start, end) @@ -190,46 +115,6 @@ ENTRY(_blackfin_dcache_invalidate_range) RTS; ENDPROC(_blackfin_dcache_invalidate_range) -/* Invalidate the Entire Data cache by - * clearing DMC[1:0] bits - */ -ENTRY(_invalidate_entire_dcache) -ENTRY(_dcache_invalidate) - [--SP] = ( R7:6); - - P0.L = LO(DMEM_CONTROL); - P0.H = HI(DMEM_CONTROL); - R7 = [P0]; - - /* Clear the DMC[1:0] bits, All valid bits in the data - * cache are set to the invalid state - */ - BITCLR(R7,DMC0_P); - BITCLR(R7,DMC1_P); - CLI R6; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - /* Configures the data cache again */ - - R6 = DMEM_CNTR; - R7 = R7 | R6; - - CLI R6; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - ( R7:6) = [SP++]; - RTS; -ENDPROC(_dcache_invalidate) -ENDPROC(_invalidate_entire_dcache) - ENTRY(_blackfin_dcache_flush_range) R2 = -L1_CACHE_BYTES; R2 = R0 & R2; -- cgit v1.2.3 From 56f5f59052bb662a77d5ffd6cbe5861a2ef2407c Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 6 Aug 2008 17:55:32 +0800 Subject: Blackfin arch: Fix Bug - System with EMAC driver enabled - Core not idling - Disable all bits in SIC_IWR unless we are going into a real (DPMC) power saving mode. Any Interrupt can wake the core form it's idle state. - Remove deep sleep mode as it is not going to be used anywhere: We support sleep, sleep deeper and hibernate. Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf527/head.S | 7 ---- arch/blackfin/mach-bf533/head.S | 7 ---- arch/blackfin/mach-bf537/head.S | 7 ---- arch/blackfin/mach-bf548/head.S | 7 ---- arch/blackfin/mach-common/dpmc_modes.S | 56 ------------------------------- arch/blackfin/mach-common/ints-priority.c | 8 ++--- arch/blackfin/mach-common/pm.c | 8 ++--- include/asm-blackfin/dpmc.h | 1 - 8 files changed, 8 insertions(+), 93 deletions(-) diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S index af20183d0d94..2cc46f8fa9a7 100644 --- a/arch/blackfin/mach-bf527/head.S +++ b/arch/blackfin/mach-bf527/head.S @@ -183,13 +183,6 @@ ENTRY(_start_dma_code) [P2] = R1; SSYNC; - p0.h = hi(SIC_IWR0); - p0.l = lo(SIC_IWR0); - r0.l = lo(IWR_ENABLE_ALL); - r0.h = hi(IWR_ENABLE_ALL); - [p0] = r0; - SSYNC; - RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 6603967367ec..184296bee3c9 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -177,13 +177,6 @@ ENTRY(_start_dma_code) [P2] = R1; SSYNC; - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = lo(IWR_ENABLE_ALL); - r0.h = hi(IWR_ENABLE_ALL); - [p0] = r0; - SSYNC; - RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 6a02e472587a..c02c8ce2d96f 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -197,13 +197,6 @@ ENTRY(_start_dma_code) [P2] = R1; SSYNC; - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = lo(IWR_ENABLE_ALL); - r0.h = hi(IWR_ENABLE_ALL); - [p0] = r0; - SSYNC; - RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index cf94e1e222b8..0b18196df869 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -201,13 +201,6 @@ ENTRY(_start_dma_code) SSYNC; #endif - p0.h = hi(SIC_IWR0); - p0.l = lo(SIC_IWR0); - r0.l = lo(IWR_ENABLE_ALL); - r0.h = hi(IWR_ENABLE_ALL); - [p0] = r0; - SSYNC; - RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S index 5e3f1d8a4fb8..838b0b2ce9a5 100644 --- a/arch/blackfin/mach-common/dpmc_modes.S +++ b/arch/blackfin/mach-common/dpmc_modes.S @@ -78,62 +78,6 @@ ENTRY(_hibernate_mode) jump .Lforever; ENDPROC(_hibernate_mode) -ENTRY(_deep_sleep) - [--SP] = ( R7:0, P5:0 ); - [--SP] = RETS; - - CLI R4; - - R0 = IWR_ENABLE(0); - R1 = IWR_DISABLE_ALL; - R2 = IWR_DISABLE_ALL; - - call _set_sic_iwr; - - call _set_dram_srfs; - - /* Clear all the interrupts,bits sticky */ - R0 = 0xFFFF (Z); - call _set_rtc_istat - - P0.H = hi(PLL_CTL); - P0.L = lo(PLL_CTL); - R0 = W[P0](z); - BITSET (R0, 5); - W[P0] = R0.L; - - call _test_pll_locked; - - SSYNC; - IDLE; - - call _unset_dram_srfs; - - call _test_pll_locked; - - R0 = IWR_ENABLE(0); - R1 = IWR_DISABLE_ALL; - R2 = IWR_DISABLE_ALL; - - call _set_sic_iwr; - - P0.H = hi(PLL_CTL); - P0.L = lo(PLL_CTL); - R0 = w[p0](z); - BITCLR (R0, 3); - BITCLR (R0, 5); - BITCLR (R0, 8); - w[p0] = R0; - IDLE; - call _test_pll_locked; - - STI R4; - - RETS = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; -ENDPROC(_deep_sleep) - ENTRY(_sleep_deeper) [--SP] = ( R7:0, P5:0 ); [--SP] = RETS; diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index e713b9db867d..4271ef3f201a 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -1068,13 +1068,13 @@ int __init init_arch_irq(void) IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) - bfin_write_SIC_IWR0(IWR_ENABLE_ALL); - bfin_write_SIC_IWR1(IWR_ENABLE_ALL); + bfin_write_SIC_IWR0(IWR_DISABLE_ALL); + bfin_write_SIC_IWR1(IWR_DISABLE_ALL); # ifdef CONFIG_BF54x - bfin_write_SIC_IWR2(IWR_ENABLE_ALL); + bfin_write_SIC_IWR2(IWR_DISABLE_ALL); # endif #else - bfin_write_SIC_IWR(IWR_ENABLE_ALL); + bfin_write_SIC_IWR(IWR_DISABLE_ALL); #endif return 0; diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index 143134b852ea..a17ace3e0e41 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -83,13 +83,13 @@ void bfin_pm_suspend_standby_enter(void) bfin_pm_standby_restore(); #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) - bfin_write_SIC_IWR0(IWR_ENABLE_ALL); - bfin_write_SIC_IWR1(IWR_ENABLE_ALL); + bfin_write_SIC_IWR0(IWR_DISABLE_ALL); + bfin_write_SIC_IWR1(IWR_DISABLE_ALL); # ifdef CONFIG_BF54x - bfin_write_SIC_IWR2(IWR_ENABLE_ALL); + bfin_write_SIC_IWR2(IWR_DISABLE_ALL); # endif #else - bfin_write_SIC_IWR(IWR_ENABLE_ALL); + bfin_write_SIC_IWR(IWR_DISABLE_ALL); #endif local_irq_restore(flags); diff --git a/include/asm-blackfin/dpmc.h b/include/asm-blackfin/dpmc.h index de28e6e018b3..96e8208f929a 100644 --- a/include/asm-blackfin/dpmc.h +++ b/include/asm-blackfin/dpmc.h @@ -11,7 +11,6 @@ #ifndef __ASSEMBLY__ void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); -void deep_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); void do_hibernate(int wakeup); -- cgit v1.2.3 From d3d0ac23a308f92fc5e5e2846ca40e7bffa5cec3 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Wed, 6 Aug 2008 17:49:27 +0800 Subject: Blackfin arch: Fix bug - when expanding the trace buffer, it does not print out the decoded instruction. as pointed out by Michael McTernan in the forums, when expanding the trace buffer, it does not print out the decoded instruction. Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 88 ++++++++++++++++++++++++++------------------ 1 file changed, 53 insertions(+), 35 deletions(-) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 62a47d67d876..9a9d5083acfd 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -601,12 +601,55 @@ bool get_instruction(unsigned short *val, unsigned short *address) return false; } +/* + * decode the instruction if we are printing out the trace, as it + * makes things easier to follow, without running it through objdump + * These are the normal instructions which cause change of flow, which + * would be at the source of the trace buffer + */ +void decode_instruction(unsigned short *address) +{ + unsigned short opcode; + + if (get_instruction(&opcode, address)) { + if (opcode == 0x0010) + printk("RTS"); + else if (opcode == 0x0011) + printk("RTI"); + else if (opcode == 0x0012) + printk("RTX"); + else if (opcode >= 0x0050 && opcode <= 0x0057) + printk("JUMP (P%i)", opcode & 7); + else if (opcode >= 0x0060 && opcode <= 0x0067) + printk("CALL (P%i)", opcode & 7); + else if (opcode >= 0x0070 && opcode <= 0x0077) + printk("CALL (PC+P%i)", opcode & 7); + else if (opcode >= 0x0080 && opcode <= 0x0087) + printk("JUMP (PC+P%i)", opcode & 7); + else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF)) + printk("IF !CC JUMP"); + else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff)) + printk("IF CC JUMP"); + else if (opcode >= 0x2000 && opcode <= 0x2fff) + printk("JUMP.S"); + else if (opcode >= 0xe080 && opcode <= 0xe0ff) + printk("LSETUP"); + else if (opcode >= 0xe200 && opcode <= 0xe2ff) + printk("JUMP.L"); + else if (opcode >= 0xe300 && opcode <= 0xe3ff) + printk("CALL pcrel"); + else + printk("0x%04x", opcode); + } + +} + void dump_bfin_trace_buffer(void) { #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON int tflags, i = 0; char buf[150]; - unsigned short val = 0, *addr; + unsigned short *addr; #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND int j, index; #endif @@ -615,6 +658,10 @@ void dump_bfin_trace_buffer(void) printk(KERN_NOTICE "Hardware Trace:\n"); +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n"); +#endif + if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) { for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { decode_address(buf, (unsigned long)bfin_read_TBUF()); @@ -622,45 +669,14 @@ void dump_bfin_trace_buffer(void) addr = (unsigned short *)bfin_read_TBUF(); decode_address(buf, (unsigned long)addr); printk(KERN_NOTICE " Source : %s ", buf); - if (get_instruction(&val, addr)) { - if (val == 0x0010) - printk("RTS"); - else if (val == 0x0011) - printk("RTI"); - else if (val == 0x0012) - printk("RTX"); - else if (val >= 0x0050 && val <= 0x0057) - printk("JUMP (P%i)", val & 7); - else if (val >= 0x0060 && val <= 0x0067) - printk("CALL (P%i)", val & 7); - else if (val >= 0x0070 && val <= 0x0077) - printk("CALL (PC+P%i)", val & 7); - else if (val >= 0x0080 && val <= 0x0087) - printk("JUMP (PC+P%i)", val & 7); - else if ((val >= 0x1000 && val <= 0x13FF) || - (val >= 0x1800 && val <= 0x1BFF)) - printk("IF !CC JUMP"); - else if ((val >= 0x1400 && val <= 0x17ff) || - (val >= 0x1c00 && val <= 0x1fff)) - printk("IF CC JUMP"); - else if (val >= 0x2000 && val <= 0x2fff) - printk("JUMP.S"); - else if (val >= 0xe080 && val <= 0xe0ff) - printk("LSETUP"); - else if (val >= 0xe200 && val <= 0xe2ff) - printk("JUMP.L"); - else if (val >= 0xe300 && val <= 0xe3ff) - printk("CALL pcrel"); - else - printk("0x%04x", val); - } + decode_instruction(addr); printk("\n"); } } #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND if (trace_buff_offset) - index = trace_buff_offset/4 - 1; + index = trace_buff_offset / 4; else index = EXPAND_LEN; @@ -672,7 +688,9 @@ void dump_bfin_trace_buffer(void) if (index < 0 ) index = EXPAND_LEN; decode_address(buf, software_trace_buff[index]); - printk(KERN_NOTICE " Source : %s\n", buf); + printk(KERN_NOTICE " Source : %s ", buf); + decode_instruction((unsigned short *)software_trace_buff[index]); + printk("\n"); index -= 1; if (index < 0) index = EXPAND_LEN; -- cgit v1.2.3 From edc9189c879af8cc8f1bf9746e63c5b014801a8a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 28 Jul 2008 15:39:38 -0300 Subject: V4L/DVB (8549a): fix kernel-doc warning, function name, and docbook filename Change function name in kernel-doc and add kernel-doc for parameter @index: Warning(linhead//drivers/media/video/videodev.c:2090): No description found for parameter 'index' Also change source file name in DocBook/videobook.tmpl to match the new source file name. Signed-off-by: Randy Dunlap Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/videobook.tmpl | 2 +- drivers/media/video/v4l2-dev.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/videobook.tmpl b/Documentation/DocBook/videobook.tmpl index 89817795e668..0bc25949b668 100644 --- a/Documentation/DocBook/videobook.tmpl +++ b/Documentation/DocBook/videobook.tmpl @@ -1648,7 +1648,7 @@ static struct video_buffer capture_fb; Public Functions Provided -!Edrivers/media/video/videodev.c +!Edrivers/media/video/v4l2-dev.c diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 556615fe93de..6f36006aecda 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -222,11 +222,13 @@ int video_register_device(struct video_device *vfd, int type, int nr) EXPORT_SYMBOL(video_register_device); /** - * video_register_device - register video4linux devices + * video_register_device_index - register video4linux devices * @vfd: video device structure we want to register * @type: type of device to register * @nr: which device number (0 == /dev/video0, 1 == /dev/video1, ... * -1 == first free) + * @index: stream number based on parent device; + * -1 if auto assign, requested number otherwise * * The registration code assigns minor numbers based on the type * requested. -ENFILE is returned in all the device slots for this -- cgit v1.2.3 From 738608ae08572bf915c3fcd40e9579fbca06464b Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 28 Jul 2008 06:41:51 -0300 Subject: V4L/DVB (8550): gspca: Change a bit the init of ov7660 and Sonix JPEG bridges. Set back some values of gspcav1 in init of sonixj sensor ov7660. Add some comments. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 46 +++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 25 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 33a3df1f6915..65452f3b1945 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -360,17 +360,15 @@ static const __u8 ov7660_sensor_init[][8] = { {0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset SCCB */ /* (delay 20ms) */ {0xa1, 0x21, 0x12, 0x05, 0x00, 0x00, 0x00, 0x10}, - /* Outformat ?? rawRGB */ + /* Outformat = rawRGB */ {0xa1, 0x21, 0x13, 0xb8, 0x00, 0x00, 0x00, 0x10}, /* init COM8 */ - {0xd1, 0x21, 0x00, 0x01, 0x74, 0x92, 0x00, 0x10}, -/* {0xd1, 0x21, 0x00, 0x01, 0x74, 0x74, 0x00, 0x10}, */ + {0xd1, 0x21, 0x00, 0x01, 0x74, 0x74, 0x00, 0x10}, /* GAIN BLUE RED VREF */ {0xd1, 0x21, 0x04, 0x00, 0x7d, 0x62, 0x00, 0x10}, /* COM 1 BAVE GEAVE AECHH */ {0xb1, 0x21, 0x08, 0x83, 0x01, 0x00, 0x00, 0x10}, /* RAVE COM2 */ {0xd1, 0x21, 0x0c, 0x00, 0x08, 0x04, 0x4f, 0x10}, /* COM 3 4 5 6 */ - {0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xf8, 0x10}, -/* {0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xff, 0x10}, */ + {0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xff, 0x10}, /* AECH CLKRC COM7 COM8 */ {0xc1, 0x21, 0x14, 0x2c, 0x00, 0x02, 0x00, 0x10}, /* COM9 COM10 */ {0xd1, 0x21, 0x17, 0x10, 0x60, 0x02, 0x7b, 0x10}, @@ -379,8 +377,8 @@ static const __u8 ov7660_sensor_init[][8] = { {0xb1, 0x21, 0x1e, 0x01, 0x0e, 0x00, 0x00, 0x10}, /* MVFP LAEC */ {0xd1, 0x21, 0x20, 0x07, 0x07, 0x07, 0x07, 0x10}, /* BOS GBOS GROS ROS (BGGR offset) */ - {0xd1, 0x21, 0x24, 0x68, 0x58, 0xd4, 0x80, 0x10}, -/* {0xd1, 0x21, 0x24, 0x78, 0x68, 0xd4, 0x80, 0x10}, */ +/* {0xd1, 0x21, 0x24, 0x68, 0x58, 0xd4, 0x80, 0x10}, */ + {0xd1, 0x21, 0x24, 0x78, 0x68, 0xd4, 0x80, 0x10}, /* AEW AEB VPT BBIAS */ {0xd1, 0x21, 0x28, 0x80, 0x30, 0x00, 0x00, 0x10}, /* GbBIAS RSVD EXHCH EXHCL */ @@ -407,9 +405,9 @@ static const __u8 ov7660_sensor_init[][8] = { {0xd1, 0x21, 0x62, 0x00, 0x00, 0x50, 0x30, 0x10}, /* LCC1 LCC2 LCC3 LCC4 */ {0xa1, 0x21, 0x66, 0x00, 0x00, 0x00, 0x00, 0x10}, /* LCC5 */ - {0xd1, 0x21, 0x67, 0x80, 0x7a, 0x90, 0x80, 0x10}, + {0xd1, 0x21, 0x67, 0x80, 0x7a, 0x90, 0x80, 0x10}, /* MANU */ {0xa1, 0x21, 0x6b, 0x0a, 0x00, 0x00, 0x00, 0x10}, - /* band gap reference [0..3] DBLV */ + /* band gap reference [0:3] DBLV */ {0xd1, 0x21, 0x6c, 0x30, 0x48, 0x80, 0x74, 0x10}, /* gamma curve */ {0xd1, 0x21, 0x70, 0x64, 0x60, 0x5c, 0x58, 0x10}, /* gamma curve */ {0xd1, 0x21, 0x74, 0x54, 0x4c, 0x40, 0x38, 0x10}, /* gamma curve */ @@ -419,37 +417,35 @@ static const __u8 ov7660_sensor_init[][8] = { {0xd1, 0x21, 0x84, 0x6e, 0x77, 0x87, 0x95, 0x10}, /* gamma curve */ {0xc1, 0x21, 0x88, 0xaf, 0xc7, 0xdf, 0x00, 0x10}, /* gamma curve */ {0xc1, 0x21, 0x8b, 0x99, 0x99, 0xcf, 0x00, 0x10}, /* reserved */ - {0xb1, 0x21, 0x92, 0x00, 0x00, 0x00, 0x00, 0x10}, + {0xb1, 0x21, 0x92, 0x00, 0x00, 0x00, 0x00, 0x10}, /* DM_LNL/H */ /****** (some exchanges in the win trace) ******/ - {0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10}, /* MVFP */ /* bits[3..0]reserved */ {0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x21, 0x03, 0x00, 0x00, 0x00, 0x00, 0x10}, /* VREF vertical frame ctrl */ {0xa1, 0x21, 0x03, 0x00, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x21, 0x10, 0x20, 0x00, 0x00, 0x00, 0x10}, /* 0x20 */ - {0xa1, 0x21, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x21, 0x2e, 0x00, 0x00, 0x00, 0x00, 0x10}, -/* {0xa1, 0x21, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x10}, */ - {0xa1, 0x21, 0x00, 0x0a, 0x00, 0x00, 0x00, 0x10}, - {0xb1, 0x21, 0x01, 0x78, 0x78, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x10, 0x20, 0x00, 0x00, 0x00, 0x10}, /* AECH 0x20 */ + {0xa1, 0x21, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x10}, /* ADVFL */ + {0xa1, 0x21, 0x2e, 0x00, 0x00, 0x00, 0x00, 0x10}, /* ADVFH */ + {0xa1, 0x21, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x10}, /* GAIN */ +/* {0xb1, 0x21, 0x01, 0x78, 0x78, 0x00, 0x00, 0x10}, * BLUE */ /****** (some exchanges in the win trace) ******/ {0xa1, 0x21, 0x93, 0x00, 0x00, 0x00, 0x00, 0x10},/* dummy line hight */ - {0xa1, 0x21, 0x92, 0x25, 0x00, 0x00, 0x00, 0x10},/* dummy line low */ - {0xa1, 0x21, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x21, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x21, 0x02, 0x90, 0x00, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x92, 0x25, 0x00, 0x00, 0x00, 0x10}, /* dummy line low */ + {0xa1, 0x21, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x10}, /* EXHCH */ + {0xa1, 0x21, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10}, /* EXHCL */ +/* {0xa1, 0x21, 0x02, 0x90, 0x00, 0x00, 0x00, 0x10}, * RED */ /****** (some exchanges in the win trace) ******/ -/**********startsensor KO if changed !!****/ +/******!! startsensor KO if changed !!****/ {0xa1, 0x21, 0x93, 0x01, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x21, 0x92, 0xff, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x21, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x21, 0x2b, 0xc3, 0x00, 0x00, 0x00, 0x10}, -/* here may start the isoc exchanges */ {} }; -/* reg0x04 reg0x07 reg 0x10 */ -/* expo = (COM1 & 0x02) | (AECHH & 0x2f <<10) [ (AECh << 2) */ +/* reg 0x04 reg 0x07 reg 0x10 */ +/* expo = (COM1 & 0x02) | ((AECHH & 0x2f) << 10) | (AECh << 2) */ static const __u8 ov7648_sensor_init[][8] = { {0xC1, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00}, -- cgit v1.2.3 From b01466e14ce82ff96b74db19ebdaefb34a430a24 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 28 Jul 2008 07:52:27 -0300 Subject: V4L/DVB (8552): gspca: Bad pixel format in the spca508 subdriver. The pixel format should have been changed in changeset 6de914aaad86. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/spca508.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c index b608a27ad115..6e213cf24cb3 100644 --- a/drivers/media/video/gspca/spca508.c +++ b/drivers/media/video/gspca/spca508.c @@ -63,22 +63,22 @@ static struct ctrl sd_ctrls[] = { }; static struct v4l2_pix_format sif_mode[] = { - {160, 120, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE, + {160, 120, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, .bytesperline = 160 * 3, .sizeimage = 160 * 120 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 3}, - {176, 144, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE, + {176, 144, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, .bytesperline = 176 * 3, .sizeimage = 176 * 144 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 2}, - {320, 240, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE, + {320, 240, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, .bytesperline = 320 * 3, .sizeimage = 320 * 240 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, - {352, 288, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE, + {352, 288, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, .bytesperline = 352 * 3, .sizeimage = 352 * 288 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, -- cgit v1.2.3 From 35774f42dc6e765fc1d8a92f36e218f617a17e1a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 28 Jul 2008 18:07:35 -0300 Subject: V4L/DVB (8558): media/video/Kconfig: fix a typo Thanks to Hermann Gausterer for pointing this issue. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index d4a6e56a7135..ecbfa1b39b70 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -630,7 +630,7 @@ config VIDEO_ZORAN_ZR36060 depends on VIDEO_ZORAN help Say Y to support Zoran boards based on 36060 chips. - This includes Iomega Bus, Pinnacle DC10, Linux media Labs 33 + This includes Iomega Buz, Pinnacle DC10, Linux media Labs 33 and 33 R10 and AverMedia 6 boards. config VIDEO_ZORAN_BUZ -- cgit v1.2.3 From 886f8d678a28882c193c2886c7280c0eccd8c9dd Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 28 Jul 2008 16:58:05 -0300 Subject: V4L/DVB (8562): DVB_DRX397XD: remove FW_LOADER select Also for the new DVB_DRX397XD driver the FW_LOADER select and the corresponding dependency on HOTPLUG can be removed. Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 574dffe91b68..7dbb4a223c99 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -135,9 +135,8 @@ config DVB_CX22702 config DVB_DRX397XD tristate "Micronas DRX3975D/DRX3977D based" - depends on DVB_CORE && I2C && HOTPLUG + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE - select FW_LOADER help A DVB-T tuner module. Say Y when you want to support this frontend. -- cgit v1.2.3 From dfb9aff025c4c874f9169e2fd690ce6fee2309fe Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 28 Jul 2008 16:58:19 -0300 Subject: V4L/DVB (8563): fix drivers/media/video/arv.c compilation This patch fixes the following compile errors: <-- snip --> ... CC [M] drivers/media/video/arv.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/media/video/arv.c: In function 'ar_ioctl': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/media/video/arv.c:544: error: implicit declaration of function 'video_usercopy' /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/media/video/arv.c: At top level: /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/media/video/arv.c:758: error: unknown field 'type' specified in initializer make[4]: *** [drivers/media/video/arv.o] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/arv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c index 56ebfd5ef6fa..9e436ad3d34b 100644 --- a/drivers/media/video/arv.c +++ b/drivers/media/video/arv.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -755,7 +756,6 @@ static const struct file_operations ar_fops = { static struct video_device ar_template = { .name = "Colour AR VGA", - .type = VID_TYPE_CAPTURE, .fops = &ar_fops, .release = ar_release, .minor = -1, -- cgit v1.2.3 From c2cfcf701881c9a4ef42d5a956f9f2d006c2af8e Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Tue, 29 Jul 2008 05:30:58 -0300 Subject: V4L/DVB (8564): fix vino driver build error The vino driver needs #include drivers/media/video/vino.c: In function 'vino_ioctl': drivers/media/video/vino.c:4364: error: implicit declaration of function 'video_usercopy' make[3]: *** [drivers/media/video/vino.o] Error 1 Signed-off-by: Yoichi Yuasa Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/vino.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c index ef7572cbc4ab..1edda456fc64 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/video/vino.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From 0cd6759da646aae9d117df278ce3d5f3cab31904 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Tue, 29 Jul 2008 05:25:28 -0300 Subject: V4L/DVB (8567): gspca: hflip and vflip controls added for ov519 - ov7670 plus init cleanup. The hflip and vflip controls work for ov7670 only. This bridge/sensor inverts blue and red - not fixed. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov519.c | 114 ++++++++++++++++++++++++++++++++------ 1 file changed, 98 insertions(+), 16 deletions(-) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 83139efc4629..b825941089b4 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -48,6 +48,8 @@ struct sd { unsigned char brightness; unsigned char contrast; unsigned char colors; + __u8 hflip; + __u8 vflip; char compress; /* Should the next frame be compressed? */ char compress_inited; /* Are compression params uploaded? */ @@ -77,6 +79,10 @@ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val); static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val); static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val); +static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { #define SD_BRIGHTNESS 0 @@ -121,6 +127,35 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcolors, .get = sd_getcolors, }, +/* next controls work with ov7670 only */ + { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Mirror", + .minimum = 0, + .maximum = 1, + .step = 1, +#define HFLIP_DEF 0 + .default_value = HFLIP_DEF, + }, + .set = sd_sethflip, + .get = sd_gethflip, + }, + { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Vflip", + .minimum = 0, + .maximum = 1, + .step = 1, +#define VFLIP_DEF 0 + .default_value = VFLIP_DEF, + }, + .set = sd_setvflip, + .get = sd_getvflip, + }, }; static struct v4l2_pix_format vga_mode[] = { @@ -225,6 +260,7 @@ static struct v4l2_pix_format sif_mode[] = { #define OV7670_REG_VSTART 0x19 /* Vert start high bits */ #define OV7670_REG_VSTOP 0x1a /* Vert stop high bits */ #define OV7670_REG_MVFP 0x1e /* Mirror / vflip */ +#define OV7670_MVFP_VFLIP 0x10 /* vertical flip */ #define OV7670_MVFP_MIRROR 0x20 /* Mirror image */ #define OV7670_REG_AEW 0x24 /* AGC upper limit */ #define OV7670_REG_AEB 0x25 /* AGC lower limit */ @@ -930,7 +966,10 @@ static int ov7xx0_configure(struct sd *sd) { OV7670_REG_EDGE, 0 }, { 0x75, 0x05 }, { 0x76, 0xe1 }, { 0x4c, 0 }, { 0x77, 0x01 }, - { OV7670_REG_COM13, 0xc3 }, { 0x4b, 0x09 }, + { OV7670_REG_COM13, OV7670_COM13_GAMMA + | OV7670_COM13_UVSAT + | 2}, /* was 3 */ + { 0x4b, 0x09 }, { 0xc9, 0x60 }, { OV7670_REG_COM16, 0x38 }, { 0x56, 0x40 }, @@ -957,19 +996,6 @@ static int ov7xx0_configure(struct sd *sd) { 0x79, 0x05 }, { 0xc8, 0x30 }, { 0x79, 0x26 }, - /* Format YUV422 */ - { OV7670_REG_COM7, OV7670_COM7_YUV }, /* Selects YUV mode */ - { OV7670_REG_RGB444, 0 }, /* No RGB444 please */ - { OV7670_REG_COM1, 0 }, - { OV7670_REG_COM15, OV7670_COM15_R00FF }, - { OV7670_REG_COM9, 0x18 }, - /* 4x gain ceiling; 0x8 is reserved bit */ - { 0x4f, 0x80 }, /* "matrix coefficient 1" */ - { 0x50, 0x80 }, /* "matrix coefficient 2" */ - { 0x52, 0x22 }, /* "matrix coefficient 4" */ - { 0x53, 0x5e }, /* "matrix coefficient 5" */ - { 0x54, 0x80 }, /* "matrix coefficient 6" */ - { OV7670_REG_COM13, OV7670_COM13_GAMMA|OV7670_COM13_UVSAT }, }; PDEBUG(D_PROBE, "starting OV7xx0 configuration"); @@ -1375,6 +1401,8 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value; sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value; sd->colors = sd_ctrls[SD_COLOR].qctrl.default_value; + sd->hflip = HFLIP_DEF; + sd->vflip = VFLIP_DEF; return 0; error: PDEBUG(D_ERR, "OV519 Config failed"); @@ -1682,6 +1710,26 @@ static int mode_init_ov_sensor_regs(struct sd *sd, return 0; } +static void sethflip(struct sd *sd) +{ + if (sd->gspca_dev.streaming) + ov51x_stop(sd); + i2c_w_mask(sd, OV7670_REG_MVFP, + OV7670_MVFP_MIRROR * sd->hflip, OV7670_MVFP_MIRROR); + if (sd->gspca_dev.streaming) + ov51x_restart(sd); +} + +static void setvflip(struct sd *sd) +{ + if (sd->gspca_dev.streaming) + ov51x_stop(sd); + i2c_w_mask(sd, OV7670_REG_MVFP, + OV7670_MVFP_VFLIP * sd->vflip, OV7670_MVFP_VFLIP); + if (sd->gspca_dev.streaming) + ov51x_restart(sd); +} + static int set_ov_sensor_window(struct sd *sd, struct ovsensor_window *win) { @@ -1811,7 +1859,8 @@ static int set_ov_sensor_window(struct sd *sd, msleep(10); /* need to sleep between read and write to * same reg! */ i2c_w(sd, OV7670_REG_VREF, v); - + sethflip(sd); + setvflip(sd); } else { i2c_w(sd, 0x17, hwsbase + (win->x >> hwscale)); i2c_w(sd, 0x18, hwebase + ((win->x + win->width) >> hwscale)); @@ -2110,6 +2159,40 @@ static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->hflip = val; + sethflip(sd); + return 0; +} + +static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->hflip; + return 0; +} + +static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->vflip = val; + setvflip(sd); + return 0; +} + +static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->vflip; + return 0; +} + /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, @@ -2178,4 +2261,3 @@ module_exit(sd_mod_exit); module_param(frame_rate, int, 0644); MODULE_PARM_DESC(frame_rate, "Frame rate (5, 10, 15, 20 or 30 fps)"); - -- cgit v1.2.3 From 8f47a3cefbb275893ce26ade7094599e4b129bb3 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Tue, 29 Jul 2008 14:14:04 -0300 Subject: V4L/DVB (8569): gspca: Set back the old values of Sonix sn9c120 and cleanup source. The values from win traces do not seem to work while the webcams did work with gspca v1. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 184 ++++++++++++------------------------- 1 file changed, 59 insertions(+), 125 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 65452f3b1945..b60ff600a757 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -148,55 +148,58 @@ static struct v4l2_pix_format vga_mode[] = { /*Data from sn9c102p+hv71331r */ static const __u8 sn_hv7131[] = { -/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 reg9 */ - 0x00, 0x03, 0x64, 0x00, 0x1A, 0x20, 0x20, 0x20, 0xA1, 0x11, -/* rega regb regc regd rege regf reg10 reg11 */ - 0x02, 0x09, 0x00, 0x00, 0x00, 0x10, 0x03, 0x00, /* 00 */ -/* reg12 reg13 reg14 reg15 reg16 reg17 reg18 reg19 reg1a reg1b */ - 0x00, 0x01, 0x03, 0x28, 0x1e, 0x41, 0x0a, 0x00, 0x00, 0x00, -/* reg1c reg1d reg1e reg1f reg20 reg21 reg22 reg23 */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ + 0x00, 0x03, 0x64, 0x00, 0x1a, 0x20, 0x20, 0x20, +/* reg8 reg9 rega regb regc regd rege regf */ + 0xa1, 0x11, 0x02, 0x09, 0x00, 0x00, 0x00, 0x10, +/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ + 0x03, 0x00, 0x00, 0x01, 0x03, 0x28, 0x1e, 0x41, +/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */ + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; static const __u8 sn_mi0360[] = { -/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 reg9 */ - 0x00, 0x61, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, 0xb1, 0x5d, -/* rega regb regc regd rege regf reg10 reg11 */ - 0x07, 0x00, 0x00, 0x00, 0x00, 0x10, 0x03, 0x00, -/* reg12 reg13 reg14 reg15 reg16 reg17 reg18 reg19 reg1a reg1b */ - 0x00, 0x02, 0x0a, 0x28, 0x1e, 0x61, 0x06, 0x00, 0x00, 0x00, -/* reg1c reg1d reg1e reg1f reg20 reg21 reg22 reg23 */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ + 0x00, 0x61, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, +/* reg8 reg9 rega regb regc regd rege regf */ + 0xb1, 0x5d, 0x07, 0x00, 0x00, 0x00, 0x00, 0x10, +/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ + 0x03, 0x00, 0x00, 0x02, 0x0a, 0x28, 0x1e, 0x61, +/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */ + 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; static const __u8 sn_mo4000[] = { -/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 */ - 0x12, 0x23, 0x60, 0x00, 0x1A, 0x00, 0x20, 0x18, 0x81, -/* reg9 rega regb regc regd rege regf reg10 reg11*/ - 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, -/* reg12 reg13 reg14 reg15 reg16 reg17 reg18 reg19 reg1a*/ - 0x0b, 0x0f, 0x14, 0x28, 0x1e, 0x40, 0x08, 0x00, 0x00, -/* reg1b reg1c reg1d reg1e reg1f reg20 reg21 reg22 reg23*/ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x25, 0x39, 0x4b, - 0x5c, 0x6b, 0x79, 0x87, 0x95, 0xa2, 0xaf, 0xbb, 0xc7, - 0xd3, 0xdf, 0xea, 0xf5 +/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ + 0x12, 0x23, 0x60, 0x00, 0x1a, 0x00, 0x20, 0x18, +/* reg8 reg9 rega regb regc regd rege regf */ + 0x81, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ + 0x03, 0x00, 0x0b, 0x0f, 0x14, 0x28, 0x1e, 0x40, +/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */ + 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; static const __u8 sn_ov7648[] = { - 0x00, 0x21, 0x62, 0x00, 0x1a, 0x20, 0x20, 0x20, 0xA1, 0x6E, 0x18, 0x65, - 0x00, 0x00, 0x00, 0x10, 0x03, 0x00, 0x00, 0x06, 0x06, 0x28, 0x1E, 0x82, - 0x07, 0x00, 0x00, 0x00, 0x00, 0x00 +/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ + 0x00, 0x21, 0x62, 0x00, 0x1a, 0x20, 0x20, 0x20, +/* reg8 reg9 rega regb regc regd rege regf */ + 0xa1, 0x6e, 0x18, 0x65, 0x00, 0x00, 0x00, 0x10, +/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ + 0x03, 0x00, 0x00, 0x06, 0x06, 0x28, 0x1e, 0x82, +/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */ + 0x07, 0x00, 0x00, 0x00, 0x00, 0x00 }; static const __u8 sn_ov7660[] = { -/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 */ - 0x00, 0x61, 0x40, 0x00, 0x1a, 0x00, 0x00, 0x00, 0x81, -/* reg9 rega regb regc regd rege regf reg10 reg11*/ - 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, -/* reg12 reg13 reg14 reg15 reg16 reg17 reg18 reg19 reg1a*/ - 0x01, 0x01, 0x14, 0x28, 0x1e, 0x00, 0x07, 0x00, 0x00, -/* reg1b reg1c reg1d reg1e reg1f reg20 reg21 reg22 reg23*/ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ + 0x00, 0x61, 0x40, 0x00, 0x1a, 0x20, 0x20, 0x20, +/* reg8 reg9 rega regb regc regd rege regf */ + 0x81, 0x21, 0x07, 0x00, 0x00, 0x00, 0x00, 0x10, +/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ + 0x03, 0x00, 0x01, 0x01, 0x08, 0x28, 0x1e, 0x20, +/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */ + 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }; /* sequence specific to the sensors - !! index = SENSOR_xxx */ @@ -212,10 +215,6 @@ static const __u8 regsn20[] = { 0x00, 0x2d, 0x46, 0x5a, 0x6c, 0x7c, 0x8b, 0x99, 0xa6, 0xb2, 0xbf, 0xca, 0xd5, 0xe0, 0xeb, 0xf5, 0xff }; -static const __u8 regsn20_sn9c120[] = { - 0x00, 0x25, 0x3c, 0x50, 0x62, 0x72, 0x81, 0x90, - 0x9e, 0xab, 0xb8, 0xc5, 0xd1, 0xdd, 0xe9, 0xf4, 0xff -}; static const __u8 regsn20_sn9c325[] = { 0x0a, 0x3a, 0x56, 0x6c, 0x7e, 0x8d, 0x9a, 0xa4, 0xaf, 0xbb, 0xc5, 0xcd, 0xd5, 0xde, 0xe8, 0xed, 0xf5 @@ -227,21 +226,6 @@ static const __u8 reg84[] = { /* 0x00, 0x00, 0x00, 0x00, 0x00 */ 0xf7, 0x0f, 0x0a, 0x00, 0x00 }; -static const __u8 reg84_sn9c120_1[] = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x0c, 0x00, 0x00 -}; -static const __u8 reg84_sn9c120_2[] = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x0c, 0x02, 0x3b -}; -static const __u8 reg84_sn9c120_3[] = { - 0x14, 0x00, 0x27, 0x00, 0x08, 0x00, 0xeb, 0x0f, - 0xd5, 0x0f, 0x42, 0x00, 0x41, 0x00, 0xca, 0x0f, - 0xf5, 0x0f, 0x0c, 0x02, 0x3b -}; static const __u8 reg84_sn9c325[] = { 0x14, 0x00, 0x27, 0x00, 0x07, 0x00, 0xe4, 0x0f, 0xd3, 0x0f, 0x4b, 0x00, 0x48, 0x00, 0xc0, 0x0f, @@ -676,13 +660,12 @@ static int configure_gpio(struct gspca_dev *gspca_dev, const __u8 *reg9a; static const __u8 reg9a_def[] = {0x08, 0x40, 0x20, 0x10, 0x00, 0x04}; - static const __u8 reg9a_sn9c120[] = /* from win trace */ - {0x00, 0x40, 0x38, 0x30, 0x00, 0x20}; static const __u8 reg9a_sn9c325[] = {0x0a, 0x40, 0x38, 0x30, 0x00, 0x20}; + static const __u8 regd4[] = {0x60, 0x00, 0x00}; reg_w1(gspca_dev, 0xf1, 0x00); - reg_w1(gspca_dev, 0x01, sn9c1xx[0]); /*fixme:jfm was [1] en v1*/ + reg_w1(gspca_dev, 0x01, 0x00); /*jfm was sn9c1xx[1] in v1*/ /* configure gpio */ reg_w(gspca_dev, 0x01, &sn9c1xx[1], 2); @@ -692,25 +675,17 @@ static int configure_gpio(struct gspca_dev *gspca_dev, case BRIDGE_SN9C325: reg9a = reg9a_sn9c325; break; - case BRIDGE_SN9C120: - reg9a = reg9a_sn9c120; - break; default: reg9a = reg9a_def; break; } reg_w(gspca_dev, 0x9a, reg9a, 6); - reg_w1(gspca_dev, 0xd4, 0x60); /*fixme:jfm 60 00 00 (3) ? */ + reg_w(gspca_dev, 0xd4, regd4, sizeof regd4); /*fixme:jfm was 60 only*/ reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f); switch (sd->bridge) { - case BRIDGE_SN9C120: /* from win trace */ - reg_w1(gspca_dev, 0x01, 0x61); - reg_w1(gspca_dev, 0x17, 0x20); - reg_w1(gspca_dev, 0x01, 0x60); - break; case BRIDGE_SN9C325: reg_w1(gspca_dev, 0x01, 0x43); reg_w1(gspca_dev, 0x17, 0xae); @@ -819,10 +794,11 @@ static int sd_open(struct gspca_dev *gspca_dev) /* setup a selector by bridge */ reg_w1(gspca_dev, 0xf1, 0x01); - reg_r(gspca_dev, 0x00, 1); /* -> regF1 = 0x00 */ - reg_w1(gspca_dev, 0xf1, gspca_dev->usb_buf[0]); reg_r(gspca_dev, 0x00, 1); + reg_w1(gspca_dev, 0xf1, gspca_dev->usb_buf[0]); + reg_r(gspca_dev, 0x00, 1); /* get sonix chip id */ regF1 = gspca_dev->usb_buf[0]; + PDEBUG(D_PROBE, "Sonix chip id: %02x", regF1); switch (sd->bridge) { case BRIDGE_SN9C102P: if (regF1 != 0x11) @@ -933,15 +909,10 @@ static void setbrightness(struct gspca_dev *gspca_dev) sd->exposure = setexposure(gspca_dev, expo); break; case SENSOR_MI0360: - expo = sd->brightness >> 4; - sd->exposure = setexposure(gspca_dev, expo); - break; case SENSOR_MO4000: expo = sd->brightness >> 4; sd->exposure = setexposure(gspca_dev, expo); break; - case SENSOR_OV7660: - return; /*jfm??*/ } k2 = sd->brightness >> 10; @@ -954,8 +925,6 @@ static void setcontrast(struct gspca_dev *gspca_dev) __u8 k2; __u8 contrast[] = { 0x00, 0x00, 0x28, 0x00, 0x07, 0x00 }; - if (sd->sensor == SENSOR_OV7660) - return; /*jfm??*/ k2 = sd->contrast; contrast[2] = k2; contrast[0] = (k2 + 1) >> 1; @@ -982,15 +951,11 @@ static void sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int i; - __u8 data; - __u8 reg1; - __u8 reg17; + __u8 reg1, reg17, reg18; const __u8 *sn9c1xx; int mode; static const __u8 C0[] = { 0x2d, 0x2d, 0x3a, 0x05, 0x04, 0x3f }; static const __u8 CA[] = { 0x28, 0xd8, 0x14, 0xec }; - static const __u8 CA_sn9c120[] = - { 0x14, 0xec, 0x0a, 0xf6 }; /* SN9C120 */ static const __u8 CE[] = { 0x32, 0xdd, 0x2d, 0xdd }; /* MI0360 */ static const __u8 CE_sn9c325[] = { 0x32, 0xdd, 0x32, 0xdd }; /* OV7648 - SN9C325 */ @@ -998,9 +963,7 @@ static void sd_start(struct gspca_dev *gspca_dev) sn9c1xx = sn_tb[(int) sd->sensor]; configure_gpio(gspca_dev, sn9c1xx); -/*fixme:jfm this sequence should appear at end of sd_start */ -/* with - reg_w1(gspca_dev, 0x01, 0x44); */ +/* reg_w1(gspca_dev, 0x01, 0x44); jfm from win trace*/ reg_w1(gspca_dev, 0x15, sn9c1xx[0x15]); reg_w1(gspca_dev, 0x16, sn9c1xx[0x16]); reg_w1(gspca_dev, 0x12, sn9c1xx[0x12]); @@ -1012,20 +975,16 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0xc7, 0x00); reg_w1(gspca_dev, 0xc8, 0x50); reg_w1(gspca_dev, 0xc9, 0x3c); -/*fixme:jfm end of ending sequence */ reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]); switch (sd->bridge) { case BRIDGE_SN9C325: - data = 0xae; - break; - case BRIDGE_SN9C120: - data = 0xa0; + reg17 = 0xae; break; default: - data = 0x60; + reg17 = 0x60; break; } - reg_w1(gspca_dev, 0x17, data); + reg_w1(gspca_dev, 0x17, reg17); reg_w1(gspca_dev, 0x05, sn9c1xx[5]); reg_w1(gspca_dev, 0x07, sn9c1xx[7]); reg_w1(gspca_dev, 0x06, sn9c1xx[6]); @@ -1040,20 +999,6 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x9a, 0x0a); reg_w1(gspca_dev, 0x99, 0x60); break; - case BRIDGE_SN9C120: - reg_w(gspca_dev, 0x20, regsn20_sn9c120, - sizeof regsn20_sn9c120); - for (i = 0; i < 2; i++) - reg_w(gspca_dev, 0x84, reg84_sn9c120_1, - sizeof reg84_sn9c120_1); - for (i = 0; i < 6; i++) - reg_w(gspca_dev, 0x84, reg84_sn9c120_2, - sizeof reg84_sn9c120_2); - reg_w(gspca_dev, 0x84, reg84_sn9c120_3, - sizeof reg84_sn9c120_3); - reg_w1(gspca_dev, 0x9a, 0x05); - reg_w1(gspca_dev, 0x99, 0x5b); - break; default: reg_w(gspca_dev, 0x20, regsn20, sizeof regsn20); for (i = 0; i < 8; i++) @@ -1103,22 +1048,14 @@ static void sd_start(struct gspca_dev *gspca_dev) /* reg1 = 0x44; */ /* reg1 = 0x46; (done) */ } else { - reg17 = 0xa2; /* 640 */ - reg1 = 0x40; + reg17 = 0x22; /* 640 MCKSIZE */ + reg1 = 0x06; } break; } reg_w(gspca_dev, 0xc0, C0, 6); + reg_w(gspca_dev, 0xca, CA, 4); switch (sd->bridge) { - case BRIDGE_SN9C120: /*jfm ?? */ - reg_w(gspca_dev, 0xca, CA_sn9c120, 4); - break; - default: - reg_w(gspca_dev, 0xca, CA, 4); - break; - } - switch (sd->bridge) { - case BRIDGE_SN9C120: /*jfm ?? */ case BRIDGE_SN9C325: reg_w(gspca_dev, 0xce, CE_sn9c325, 4); break; @@ -1129,14 +1066,13 @@ static void sd_start(struct gspca_dev *gspca_dev) } /* here change size mode 0 -> VGA; 1 -> CIF */ - data = 0x40 | sn9c1xx[0x18] | (mode << 4); - reg_w1(gspca_dev, 0x18, data); + reg18 = sn9c1xx[0x18] | (mode << 4); + reg_w1(gspca_dev, 0x18, reg18 | 0x40); reg_w(gspca_dev, 0x100, qtable4, 0x40); reg_w(gspca_dev, 0x140, qtable4 + 0x40, 0x40); - data = sn9c1xx[0x18] | (mode << 4); - reg_w1(gspca_dev, 0x18, data); + reg_w1(gspca_dev, 0x18, reg18); reg_w1(gspca_dev, 0x17, reg17); reg_w1(gspca_dev, 0x01, reg1); @@ -1164,12 +1100,11 @@ static void sd_stopN(struct gspca_dev *gspca_dev) i2c_w8(gspca_dev, stopmi0360); data = 0x29; break; - case SENSOR_MO4000: - break; case SENSOR_OV7648: data = 0x29; break; default: +/* case SENSOR_MO4000: */ /* case SENSOR_OV7660: */ break; } @@ -1296,6 +1231,7 @@ static unsigned int getexposure(struct gspca_dev *gspca_dev) (hexpo << 10) | (mexpo << 2) | lexpo); return (hexpo << 10) | (mexpo << 2) | lexpo; default: +/* case SENSOR_OV7648: * jfm: is it ok for 7648? */ /* case SENSOR_OV7660: */ /* read sensor exposure */ i2c_r5(gspca_dev, 0x04); @@ -1314,14 +1250,12 @@ static void getbrightness(struct gspca_dev *gspca_dev) /* hardcoded registers seem not readable */ switch (sd->sensor) { case SENSOR_HV7131R: -/* sd->brightness = 0x7fff; */ sd->brightness = getexposure(gspca_dev) >> 4; break; case SENSOR_MI0360: sd->brightness = getexposure(gspca_dev) << 4; break; case SENSOR_MO4000: -/* sd->brightness = 0x1fff; */ sd->brightness = getexposure(gspca_dev) << 4; break; } -- cgit v1.2.3 From 335b3f88f2c3cb101059970f57860503b20d210f Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 30 Jul 2008 04:53:02 -0300 Subject: V4L/DVB (8571): gspca: Don't use CONFIG_VIDEO_ADV_DEBUG as a compile option. This option is changed to GSPCA_DEBUG and it is set by default in gspca.h. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/conex.c | 4 ++-- drivers/media/video/gspca/etoms.c | 4 ++-- drivers/media/video/gspca/gspca.c | 10 +++++----- drivers/media/video/gspca/gspca.h | 5 ++++- drivers/media/video/gspca/sonixb.c | 2 +- drivers/media/video/gspca/zc3xx.c | 6 +++--- 6 files changed, 17 insertions(+), 14 deletions(-) diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c index 44b0bffeb20e..cd3a3f5829b2 100644 --- a/drivers/media/video/gspca/conex.c +++ b/drivers/media/video/gspca/conex.c @@ -123,7 +123,7 @@ static void reg_r(struct gspca_dev *gspca_dev, { struct usb_device *dev = gspca_dev->dev; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (len > sizeof gspca_dev->usb_buf) { err("reg_r: buffer overflow"); return; @@ -163,7 +163,7 @@ static void reg_w(struct gspca_dev *gspca_dev, { struct usb_device *dev = gspca_dev->dev; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (len > sizeof gspca_dev->usb_buf) { err("reg_w: buffer overflow"); return; diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c index c8c2f02fcf00..6a4e68286ef4 100644 --- a/drivers/media/video/gspca/etoms.c +++ b/drivers/media/video/gspca/etoms.c @@ -233,7 +233,7 @@ static void reg_r(struct gspca_dev *gspca_dev, { struct usb_device *dev = gspca_dev->dev; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (len > sizeof gspca_dev->usb_buf) { err("reg_r: buffer overflow"); return; @@ -271,7 +271,7 @@ static void reg_w(struct gspca_dev *gspca_dev, { struct usb_device *dev = gspca_dev->dev; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (len > sizeof gspca_dev->usb_buf) { err("reg_w: buffer overflow"); return; diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 3a051c925ff6..7f773e378979 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -47,7 +47,7 @@ MODULE_LICENSE("GPL"); static int video_nr = -1; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG int gspca_debug = D_ERR | D_PROBE; EXPORT_SYMBOL(gspca_debug); @@ -677,7 +677,7 @@ static int try_fmt_vid_cap(struct gspca_dev *gspca_dev, w = fmt->fmt.pix.width; h = fmt->fmt.pix.height; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (gspca_debug & D_CONF) PDEBUG_MODE("try fmt cap", fmt->fmt.pix.pixelformat, w, h); #endif @@ -785,7 +785,7 @@ static int dev_open(struct inode *inode, struct file *file) } gspca_dev->users++; file->private_data = gspca_dev; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG /* activate the v4l2 debug */ if (gspca_debug & D_V4L2) gspca_dev->vdev.debug |= 3; @@ -1080,7 +1080,7 @@ static int vidioc_streamon(struct file *file, void *priv, if (ret < 0) goto out; } -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (gspca_debug & D_STREAM) { PDEBUG_MODE("stream on OK", gspca_dev->pixfmt, @@ -1913,7 +1913,7 @@ static void __exit gspca_exit(void) module_init(gspca_init); module_exit(gspca_exit); -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG module_param_named(debug, gspca_debug, int, 0644); MODULE_PARM_DESC(debug, "Debug (bit) 0x01:error 0x02:probe 0x04:config" diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 3fd2c4eee204..67e448940eaa 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -9,7 +9,10 @@ #include #include -#ifdef CONFIG_VIDEO_ADV_DEBUG +/* compilation option */ +#define GSPCA_DEBUG 1 + +#ifdef GSPCA_DEBUG /* GSPCA our debug messages */ extern int gspca_debug; #define PDEBUG(level, fmt, args...) \ diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index e18748c5a14d..11210c71f66c 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -408,7 +408,7 @@ static void reg_w(struct gspca_dev *gspca_dev, const __u8 *buffer, int len) { -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (len > sizeof gspca_dev->usb_buf) { PDEBUG(D_ERR|D_PACK, "reg_w: buffer overflow"); return; diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index 22a994ccb1d5..bc7d0eedcd81 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -6469,7 +6469,7 @@ static void setcontrast(struct gspca_dev *gspca_dev) NULL, Tgradient_1, Tgradient_2, Tgradient_3, Tgradient_4, Tgradient_5, Tgradient_6 }; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG __u8 v[16]; #endif @@ -6487,7 +6487,7 @@ static void setcontrast(struct gspca_dev *gspca_dev) else if (g <= 0) g = 1; reg_w(dev, g, 0x0120 + i); /* gamma */ -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (gspca_debug & D_CONF) v[i] = g; #endif @@ -6507,7 +6507,7 @@ static void setcontrast(struct gspca_dev *gspca_dev) g = 1; } reg_w(dev, g, 0x0130 + i); /* gradient */ -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (gspca_debug & D_CONF) v[i] = g; #endif -- cgit v1.2.3 From 16fca0449997f1d77cd2d45d6c34b015f3853012 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 30 Jul 2008 05:14:38 -0300 Subject: V4L/DVB (8572): gspca: Webcam 0c45:6143 in documentation. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index bcaf4ab383be..78a863ab8a5a 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -226,6 +226,7 @@ sonixj 0c45:6130 Sonix Pccam sonixj 0c45:6138 Sn9c120 Mo4000 sonixj 0c45:613b Surfer SN-206 sonixj 0c45:613c Sonix Pccam168 +sonixj 0c45:6143 Sonix Pccam168 sunplus 0d64:0303 Sunplus FashionCam DXG etoms 102c:6151 Qcam Sangha CIF etoms 102c:6251 Qcam xxxxxx VGA -- cgit v1.2.3 From 01b988b2abdd60cc58c7916c5f91602d2571e0c5 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 30 Jul 2008 05:33:11 -0300 Subject: V4L/DVB (8573): gspca: Bad scan of frame in spca505/506/508. Bug introduced in changeset 6de914aaad86. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/spca505.c | 2 +- drivers/media/video/gspca/spca506.c | 2 +- drivers/media/video/gspca/spca508.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c index 3c2be80cbd65..9cc178ee203b 100644 --- a/drivers/media/video/gspca/spca505.c +++ b/drivers/media/video/gspca/spca505.c @@ -776,7 +776,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, default: data += 1; len -= 1; - gspca_frame_add(gspca_dev, FIRST_PACKET, frame, + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); break; } diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c index 6fe715c80ad2..b4cf36a80df5 100644 --- a/drivers/media/video/gspca/spca506.c +++ b/drivers/media/video/gspca/spca506.c @@ -588,7 +588,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, default: data += 1; len -= 1; - gspca_frame_add(gspca_dev, FIRST_PACKET, frame, + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); break; } diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c index 6e213cf24cb3..a27686c8b849 100644 --- a/drivers/media/video/gspca/spca508.c +++ b/drivers/media/video/gspca/spca508.c @@ -1583,7 +1583,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, default: data += 1; len -= 1; - gspca_frame_add(gspca_dev, FIRST_PACKET, frame, + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); break; } -- cgit v1.2.3 From 00b27ce6205be8a943ae63d7bcce5208a9802bc3 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 30 Jul 2008 05:47:54 -0300 Subject: V4L/DVB (8574): gspca: Bad bytesperlines of pixelformat in spca505/506/508 and vc023x. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/spca505.c | 10 +++++----- drivers/media/video/gspca/spca506.c | 10 +++++----- drivers/media/video/gspca/spca508.c | 8 ++++---- drivers/media/video/gspca/vc032x.c | 4 ++-- 4 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c index 9cc178ee203b..eda29d609359 100644 --- a/drivers/media/video/gspca/spca505.c +++ b/drivers/media/video/gspca/spca505.c @@ -61,27 +61,27 @@ static struct ctrl sd_ctrls[] = { static struct v4l2_pix_format vga_mode[] = { {160, 120, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 160 * 3, + .bytesperline = 160, .sizeimage = 160 * 120 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 5}, {176, 144, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 176 * 3, + .bytesperline = 176, .sizeimage = 176 * 144 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 4}, {320, 240, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 320 * 3, + .bytesperline = 320, .sizeimage = 320 * 240 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 2}, {352, 288, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 352 * 3, + .bytesperline = 352, .sizeimage = 352 * 288 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, {640, 480, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 640 * 3, + .bytesperline = 640, .sizeimage = 640 * 480 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c index b4cf36a80df5..f622fa75766d 100644 --- a/drivers/media/video/gspca/spca506.c +++ b/drivers/media/video/gspca/spca506.c @@ -112,27 +112,27 @@ static struct ctrl sd_ctrls[] = { static struct v4l2_pix_format vga_mode[] = { {160, 120, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 160 * 3, + .bytesperline = 160, .sizeimage = 160 * 120 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 5}, {176, 144, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 176 * 3, + .bytesperline = 176, .sizeimage = 176 * 144 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 4}, {320, 240, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 320 * 3, + .bytesperline = 320, .sizeimage = 320 * 240 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 2}, {352, 288, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 352 * 3, + .bytesperline = 352, .sizeimage = 352 * 288 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, {640, 480, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 640 * 3, + .bytesperline = 640, .sizeimage = 640 * 480 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c index a27686c8b849..699340c17dea 100644 --- a/drivers/media/video/gspca/spca508.c +++ b/drivers/media/video/gspca/spca508.c @@ -64,22 +64,22 @@ static struct ctrl sd_ctrls[] = { static struct v4l2_pix_format sif_mode[] = { {160, 120, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, - .bytesperline = 160 * 3, + .bytesperline = 160, .sizeimage = 160 * 120 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 3}, {176, 144, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, - .bytesperline = 176 * 3, + .bytesperline = 176, .sizeimage = 176 * 144 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 2}, {320, 240, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, - .bytesperline = 320 * 3, + .bytesperline = 320, .sizeimage = 320 * 240 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, {352, 288, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, - .bytesperline = 352 * 3, + .bytesperline = 352, .sizeimage = 352 * 288 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index a4221753e1bf..f4a52956e0d9 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -88,12 +88,12 @@ static struct ctrl sd_ctrls[] = { static struct v4l2_pix_format vc0321_mode[] = { {320, 240, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE, - .bytesperline = 320 * 2, + .bytesperline = 320, .sizeimage = 320 * 240 * 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, {640, 480, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE, - .bytesperline = 640 * 2, + .bytesperline = 640, .sizeimage = 640 * 480 * 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, -- cgit v1.2.3 From a674a3b492d8085fd02ee49ed11cb42c63f0f71a Mon Sep 17 00:00:00 2001 From: Eugeniy Meshcheryakov Date: Fri, 1 Aug 2008 08:23:41 -0300 Subject: V4L/DVB (8582): set mts_firmware for em2882 based Pinnacle Hybrid Pro Pinnacle Hybrid Pro (2304:0226) requires mts_firmware flag to have any sound. Without this flag it is useful only for watching silent movies. Signed-off-by: Eugeniy Meshcheryakov Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 476ae44a62d2..452da70e719f 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1015,6 +1015,7 @@ struct em28xx_board em28xx_boards[] = { .valid = EM28XX_BOARD_NOT_VALIDATED, .vchannels = 3, .tuner_type = TUNER_XC2028, + .mts_firmware = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, -- cgit v1.2.3 From 594f5b8b3cce6d3137ebf260b7386520b2534385 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Fri, 1 Aug 2008 06:37:51 -0300 Subject: V4L/DVB (8602): gspca: Fix small bugs, simplify and cleanup ov519. The hflip and vflip controls work for ov519 - ov7670 only. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov519.c | 394 ++++++++++++++------------------------ 1 file changed, 143 insertions(+), 251 deletions(-) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index b825941089b4..b4f00ec0885c 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -40,8 +40,7 @@ struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ /* Determined by sensor type */ - short maxwidth; - short maxheight; + char sif; unsigned char primary_i2c_slave; /* I2C write id of sensor */ @@ -85,7 +84,6 @@ static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { -#define SD_BRIGHTNESS 0 { { .id = V4L2_CID_BRIGHTNESS, @@ -94,12 +92,12 @@ static struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 255, .step = 1, - .default_value = 127, +#define BRIGHTNESS_DEF 127 + .default_value = BRIGHTNESS_DEF, }, .set = sd_setbrightness, .get = sd_getbrightness, }, -#define SD_CONTRAST 1 { { .id = V4L2_CID_CONTRAST, @@ -108,21 +106,22 @@ static struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 255, .step = 1, - .default_value = 127, +#define CONTRAST_DEF 127 + .default_value = CONTRAST_DEF, }, .set = sd_setcontrast, .get = sd_getcontrast, }, -#define SD_COLOR 2 { { .id = V4L2_CID_SATURATION, .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Saturation", + .name = "Color", .minimum = 0, .maximum = 255, .step = 1, - .default_value = 127, +#define COLOR_DEF 127 + .default_value = COLOR_DEF, }, .set = sd_setcolors, .get = sd_getcolors, @@ -161,7 +160,7 @@ static struct ctrl sd_ctrls[] = { static struct v4l2_pix_format vga_mode[] = { {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 320, - .sizeimage = 320 * 240 * 3 / 8 + 589, + .sizeimage = 320 * 240 * 3 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 1}, {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, @@ -173,12 +172,12 @@ static struct v4l2_pix_format vga_mode[] = { static struct v4l2_pix_format sif_mode[] = { {176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 176, - .sizeimage = 176 * 144 * 3 / 8 + 589, + .sizeimage = 176 * 144 * 3 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 1}, {352, 288, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 352, - .sizeimage = 352 * 288 * 3 / 8 + 589, + .sizeimage = 352 * 288 * 3 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0}, }; @@ -294,16 +293,6 @@ static struct v4l2_pix_format sif_mode[] = { #define OV7670_REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */ #define OV7670_REG_BD60MAX 0xab /* 60hz banding step limit */ -struct ovsensor_window { - short x; - short y; - short width; - short height; -/* int format; */ - short quarter; /* Scale width and height down 2x */ - short clockdiv; /* Clock divisor setting */ -}; - static unsigned char ov7670_abs_to_sm(unsigned char v) { if (v > 127) @@ -535,19 +524,6 @@ static int init_ov_sensor(struct sd *sd) return 0; } -/* Switch on standard JPEG compression. Returns 0 for success. */ -static int ov519_init_compression(struct sd *sd) -{ - if (!sd->compress_inited) { - if (reg_w_mask(sd, OV519_SYS_EN_CLK1, 1 << 2, 1 << 2) < 0) { - PDEBUG(D_ERR, "Error switching to compressed mode"); - return -EIO; - } - sd->compress_inited = 1; - } - return 0; -} - /* Set the read and write slave IDs. The "slave" argument is the write slave, * and the read slave will be set to (slave + 1). * This should not be called from outside the i2c I/O functions. @@ -717,21 +693,17 @@ static int ov8xx0_configure(struct sd *sd) return -1; } if ((rc & 3) == 1) { - PDEBUG(D_PROBE, "Sensor is an OV8610"); sd->sensor = SEN_OV8610; } else { PDEBUG(D_ERR, "Unknown image sensor version: %d", rc & 3); return -1; } PDEBUG(D_PROBE, "Writing 8610 registers"); - if (write_i2c_regvals(sd, - norm_8610, - sizeof norm_8610 / sizeof norm_8610[0])) + if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610))) return -1; /* Set sensor-specific vars */ - sd->maxwidth = 640; - sd->maxheight = 480; +/* sd->sif = 0; already done */ return 0; } @@ -861,7 +833,7 @@ static int ov7xx0_configure(struct sd *sd) { OV7670_REG_COM7, OV7670_COM7_RESET }, { OV7670_REG_TSLB, 0x04 }, /* OV */ { OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */ - { OV7670_REG_CLKRC, 0x1 }, + { OV7670_REG_CLKRC, 0x01 }, /* * Set the hardware window. These values from OV don't entirely * make sense - hstop is less than hstart. But they work... @@ -875,16 +847,12 @@ static int ov7xx0_configure(struct sd *sd) { 0x70, 0x3a }, { 0x71, 0x35 }, { 0x72, 0x11 }, { 0x73, 0xf0 }, { 0xa2, 0x02 }, -/* jfm */ -/* { OV7670_REG_COM10, 0x0 }, */ +/* { OV7670_REG_COM10, 0x0 }, */ /* Gamma curve values */ { 0x7a, 0x20 }, -/* jfm:win 7b=1c */ { 0x7b, 0x10 }, -/* jfm:win 7c=28 */ { 0x7c, 0x1e }, -/* jfm:win 7d=3c */ { 0x7d, 0x35 }, { 0x7e, 0x5a }, { 0x7f, 0x69 }, { 0x80, 0x76 }, { 0x81, 0x80 }, @@ -900,13 +868,11 @@ static int ov7xx0_configure(struct sd *sd) | OV7670_COM8_BFILT }, { OV7670_REG_GAIN, 0 }, { OV7670_REG_AECH, 0 }, { OV7670_REG_COM4, 0x40 }, /* magic reserved bit */ -/* jfm:win 14=38 */ { OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */ { OV7670_REG_BD50MAX, 0x05 }, { OV7670_REG_BD60MAX, 0x07 }, { OV7670_REG_AEW, 0x95 }, { OV7670_REG_AEB, 0x33 }, { OV7670_REG_VPT, 0xe3 }, { OV7670_REG_HAECC1, 0x78 }, { OV7670_REG_HAECC2, 0x68 }, -/* jfm:win a1=0b */ { 0xa1, 0x03 }, /* magic */ { OV7670_REG_HAECC3, 0xd8 }, { OV7670_REG_HAECC4, 0xd8 }, { OV7670_REG_HAECC5, 0xf0 }, { OV7670_REG_HAECC6, 0x90 }, @@ -920,8 +886,6 @@ static int ov7xx0_configure(struct sd *sd) /* Almost all of these are magic "reserved" values. */ { OV7670_REG_COM5, 0x61 }, { OV7670_REG_COM6, 0x4b }, { 0x16, 0x02 }, -/* jfm */ -/* { OV7670_REG_MVFP, 0x07|OV7670_MVFP_MIRROR }, */ { OV7670_REG_MVFP, 0x07 }, { 0x21, 0x02 }, { 0x22, 0x91 }, { 0x29, 0x07 }, { 0x33, 0x0b }, @@ -995,17 +959,10 @@ static int ov7xx0_configure(struct sd *sd) { 0x79, 0x03 }, { 0xc8, 0x40 }, { 0x79, 0x05 }, { 0xc8, 0x30 }, { 0x79, 0x26 }, - -}; + }; PDEBUG(D_PROBE, "starting OV7xx0 configuration"); -/* jfm:already done? */ - if (init_ov_sensor(sd) < 0) - PDEBUG(D_ERR, "Failed to read sensor ID"); - else - PDEBUG(D_PROBE, "OV7xx0 initialized"); - /* Detect sensor (sub)type */ rc = i2c_r(sd, OV7610_REG_COM_I); @@ -1051,20 +1008,25 @@ static int ov7xx0_configure(struct sd *sd) return low; } if (high == 0x76) { - if (low == 0x30) { + switch (low) { + case 0x30: PDEBUG(D_PROBE, "Sensor is an OV7630/OV7635"); sd->sensor = SEN_OV7630; - } else if (low == 0x40) { + break; + case 0x40: PDEBUG(D_PROBE, "Sensor is an OV7645"); sd->sensor = SEN_OV7640; /* FIXME */ - } else if (low == 0x45) { + break; + case 0x45: PDEBUG(D_PROBE, "Sensor is an OV7645B"); sd->sensor = SEN_OV7640; /* FIXME */ - } else if (low == 0x48) { + break; + case 0x48: PDEBUG(D_PROBE, "Sensor is an OV7648"); sd->sensor = SEN_OV7640; /* FIXME */ - } else { - PDEBUG(D_PROBE, "Unknown sensor: 0x76%X", low); + break; + default: + PDEBUG(D_PROBE, "Unknown sensor: 0x76%x", low); return -1; } } else { @@ -1076,34 +1038,34 @@ static int ov7xx0_configure(struct sd *sd) return -1; } - if (sd->sensor == SEN_OV7620) { + switch (sd->sensor) { + case SEN_OV7620: PDEBUG(D_PROBE, "Writing 7620 registers"); - if (write_i2c_regvals(sd, norm_7620, - sizeof norm_7620 / sizeof norm_7620[0])) + if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620))) return -1; - } else if (sd->sensor == SEN_OV7630) { + break; + case SEN_OV7630: PDEBUG(D_ERR, "7630 is not supported by this driver version"); return -1; - } else if (sd->sensor == SEN_OV7640) { + case SEN_OV7640: PDEBUG(D_PROBE, "Writing 7640 registers"); - if (write_i2c_regvals(sd, norm_7640, - sizeof norm_7640 / sizeof norm_7640[0])) + if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640))) return -1; - } else if (sd->sensor == SEN_OV7670) { + break; + case SEN_OV7670: PDEBUG(D_PROBE, "Writing 7670 registers"); - if (write_i2c_regvals(sd, norm_7670, - sizeof norm_7670 / sizeof norm_7670[0])) + if (write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670))) return -1; - } else { + break; + default: PDEBUG(D_PROBE, "Writing 7610 registers"); - if (write_i2c_regvals(sd, norm_7610, - sizeof norm_7610 / sizeof norm_7610[0])) + if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610))) return -1; + break; } /* Set sensor-specific vars */ - sd->maxwidth = 640; - sd->maxheight = 480; +/* sd->sif = 0; already done */ return 0; } @@ -1257,43 +1219,45 @@ static int ov6xx0_configure(struct sd *sd) /* Ugh. The first two bits are the version bits, but * the entire register value must be used. I guess OVT * underestimated how many variants they would make. */ - if (rc == 0x00) { + switch (rc) { + case 0x00: sd->sensor = SEN_OV6630; PDEBUG(D_ERR, "WARNING: Sensor is an OV66308. Your camera may have"); PDEBUG(D_ERR, "been misdetected in previous driver versions."); - } else if (rc == 0x01) { + break; + case 0x01: sd->sensor = SEN_OV6620; - PDEBUG(D_PROBE, "Sensor is an OV6620"); - } else if (rc == 0x02) { + break; + case 0x02: sd->sensor = SEN_OV6630; PDEBUG(D_PROBE, "Sensor is an OV66308AE"); - } else if (rc == 0x03) { + break; + case 0x03: sd->sensor = SEN_OV6630; PDEBUG(D_PROBE, "Sensor is an OV66308AF"); - } else if (rc == 0x90) { + break; + case 0x90: sd->sensor = SEN_OV6630; PDEBUG(D_ERR, "WARNING: Sensor is an OV66307. Your camera may have"); PDEBUG(D_ERR, "been misdetected in previous driver versions."); - } else { + break; + default: PDEBUG(D_ERR, "FATAL: Unknown sensor version: 0x%02x", rc); return -1; } /* Set sensor-specific vars */ - sd->maxwidth = 352; - sd->maxheight = 288; + sd->sif = 1; if (sd->sensor == SEN_OV6620) { PDEBUG(D_PROBE, "Writing 6x20 registers"); - if (write_i2c_regvals(sd, norm_6x20, - sizeof norm_6x20 / sizeof norm_6x20[0])) + if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20))) return -1; } else { PDEBUG(D_PROBE, "Writing 6x30 registers"); - if (write_i2c_regvals(sd, norm_6x30, - sizeof norm_6x30 / sizeof norm_6x30[0])) + if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30))) return -1; } return 0; @@ -1302,14 +1266,8 @@ static int ov6xx0_configure(struct sd *sd) /* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */ static void ov51x_led_control(struct sd *sd, int on) { - PDEBUG(D_STREAM, "LED (%s)", on ? "on" : "off"); - -/* if (sd->bridge == BRG_OV511PLUS) */ -/* reg_w(sd, R511_SYS_LED_CTL, on ? 1 : 0); */ -/* else if (sd->bridge == BRG_OV519) */ - reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1); /* 0 / 1 */ -/* else if (sd->bclass == BCL_OV518) */ -/* reg_w_mask(sd, R518_GPIO_OUT, on ? 0x02 : 0x00, 0x02); */ +/* PDEBUG(D_STREAM, "LED (%s)", on ? "on" : "off"); */ + reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1); /* 0 / 1 */ } /* this function is called at probe time */ @@ -1319,11 +1277,8 @@ static int sd_config(struct gspca_dev *gspca_dev, struct sd *sd = (struct sd *) gspca_dev; struct cam *cam; -/* (from ov519_configure) */ static const struct ov_regvals init_519[] = { { 0x5a, 0x6d }, /* EnableSystem */ -/* jfm trace usbsnoop3-1.txt */ -/* jfm 53 = fb */ { 0x53, 0x9b }, { 0x54, 0xff }, /* set bit2 to enable jpeg */ { 0x5d, 0x03 }, @@ -1340,9 +1295,6 @@ static int sd_config(struct gspca_dev *gspca_dev, if (write_regvals(sd, init_519, ARRAY_SIZE(init_519))) goto error; -/* jfm: not seen in windows trace */ - if (ov519_init_compression(sd)) - goto error; ov51x_led_control(sd, 0); /* turn LED off */ /* Test for 76xx */ @@ -1391,16 +1343,16 @@ static int sd_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; cam->epaddr = OV511_ENDPOINT_ADDRESS; - if (sd->maxwidth == 640) { + if (!sd->sif) { cam->cam_mode = vga_mode; - cam->nmodes = sizeof vga_mode / sizeof vga_mode[0]; + cam->nmodes = ARRAY_SIZE(vga_mode); } else { cam->cam_mode = sif_mode; - cam->nmodes = sizeof sif_mode / sizeof sif_mode[0]; + cam->nmodes = ARRAY_SIZE(sif_mode); } - sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value; - sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value; - sd->colors = sd_ctrls[SD_COLOR].qctrl.default_value; + sd->brightness = BRIGHTNESS_DEF; + sd->contrast = CONTRAST_DEF; + sd->colors = COLOR_DEF; sd->hflip = HFLIP_DEF; sd->vflip = VFLIP_DEF; return 0; @@ -1422,8 +1374,7 @@ static int sd_open(struct gspca_dev *gspca_dev) * * Do not put any sensor-specific code in here (including I2C I/O functions) */ -static int ov519_mode_init_regs(struct sd *sd, - int width, int height) +static int ov519_mode_init_regs(struct sd *sd) { static const struct ov_regvals mode_init_519_ov7670[] = { { 0x5d, 0x03 }, /* Turn off suspend mode */ @@ -1469,36 +1420,23 @@ static int ov519_mode_init_regs(struct sd *sd, /* windows reads 0x55 at this point, why? */ }; -/* int hi_res; */ - - PDEBUG(D_CONF, "mode init %dx%d", width, height); - -/* if (width >= 800 && height >= 600) - hi_res = 1; - else - hi_res = 0; */ - -/* if (ov51x_stop(sd) < 0) - return -EIO; */ - /******** Set the mode ********/ if (sd->sensor != SEN_OV7670) { if (write_regvals(sd, mode_init_519, ARRAY_SIZE(mode_init_519))) return -EIO; + if (sd->sensor == SEN_OV7640) { + /* Select 8-bit input mode */ + reg_w_mask(sd, OV519_CAM_DFR, 0x10, 0x10); + } } else { if (write_regvals(sd, mode_init_519_ov7670, ARRAY_SIZE(mode_init_519_ov7670))) return -EIO; } - if (sd->sensor == SEN_OV7640) { - /* Select 8-bit input mode */ - reg_w_mask(sd, OV519_CAM_DFR, 0x10, 0x10); - } - - reg_w(sd, OV519_CAM_H_SIZE, width >> 4); - reg_w(sd, OV519_CAM_V_SIZE, height >> 3); + reg_w(sd, OV519_CAM_H_SIZE, sd->gspca_dev.width >> 4); + reg_w(sd, OV519_CAM_V_SIZE, sd->gspca_dev.height >> 3); reg_w(sd, OV519_CAM_X_OFFSETL, 0x00); reg_w(sd, OV519_CAM_X_OFFSETH, 0x00); reg_w(sd, OV519_CAM_Y_OFFSETL, 0x00); @@ -1513,9 +1451,10 @@ static int ov519_mode_init_regs(struct sd *sd, /* FIXME: These are only valid at the max resolution. */ sd->clockdiv = 0; - if (sd->sensor == SEN_OV7640) { + switch (sd->sensor) { + case SEN_OV7640: switch (sd->frame_rate) { -/*jfm: default was 30 fps */ +/*fixme: default was 30 fps */ case 30: reg_w(sd, 0xa4, 0x0c); reg_w(sd, 0x23, 0xff); @@ -1545,7 +1484,8 @@ static int ov519_mode_init_regs(struct sd *sd, sd->clockdiv = 1; break; } - } else if (sd->sensor == SEN_OV8610) { + break; + case SEN_OV8610: switch (sd->frame_rate) { default: /* 15 fps */ /* case 15: */ @@ -1561,41 +1501,37 @@ static int ov519_mode_init_regs(struct sd *sd, reg_w(sd, 0x23, 0x1b); break; } - sd->clockdiv = 0; - } else if (sd->sensor == SEN_OV7670) { /* guesses, based on 7640 */ + break; + case SEN_OV7670: /* guesses, based on 7640 */ PDEBUG(D_STREAM, "Setting framerate to %d fps", (sd->frame_rate == 0) ? 15 : sd->frame_rate); + reg_w(sd, 0xa4, 0x10); switch (sd->frame_rate) { case 30: - reg_w(sd, 0xa4, 0x10); reg_w(sd, 0x23, 0xff); break; case 20: - reg_w(sd, 0xa4, 0x10); reg_w(sd, 0x23, 0x1b); break; - default: /* 15 fps */ -/* case 15: */ - reg_w(sd, 0xa4, 0x10); + default: +/* case 15: */ reg_w(sd, 0x23, 0xff); sd->clockdiv = 1; break; } + break; } -/* if (ov51x_restart(sd) < 0) - return -EIO; */ - - /* Reset it just for good measure */ -/* if (ov51x_reset(sd, OV511_RESET_NOREGS) < 0) - return -EIO; */ return 0; } -static int mode_init_ov_sensor_regs(struct sd *sd, - struct ovsensor_window *win) +static int mode_init_ov_sensor_regs(struct sd *sd) { - int qvga = win->quarter; + struct gspca_dev *gspca_dev; + int qvga; + + gspca_dev = &sd->gspca_dev; + qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; /******** Mode (VGA/QVGA) and sensor specific regs ********/ switch (sd->sensor) { @@ -1639,8 +1575,6 @@ static int mode_init_ov_sensor_regs(struct sd *sd, OV7670_COM7_FMT_MASK); break; case SEN_OV6620: - i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); - break; case SEN_OV6630: i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); break; @@ -1649,24 +1583,21 @@ static int mode_init_ov_sensor_regs(struct sd *sd, } /******** Palette-specific regs ********/ -/* Need to do work here for the OV7670 */ - - if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) { - /* not valid on the OV6620/OV7620/6630? */ - i2c_w_mask(sd, 0x0e, 0x00, 0x40); - } + if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) { + /* not valid on the OV6620/OV7620/6630? */ + i2c_w_mask(sd, 0x0e, 0x00, 0x40); + } - /* The OV518 needs special treatment. Although both the OV518 - * and the OV6630 support a 16-bit video bus, only the 8 bit Y - * bus is actually used. The UV bus is tied to ground. - * Therefore, the OV6630 needs to be in 8-bit multiplexed - * output mode */ + /* The OV518 needs special treatment. Although both the OV518 + * and the OV6630 support a 16-bit video bus, only the 8 bit Y + * bus is actually used. The UV bus is tied to ground. + * Therefore, the OV6630 needs to be in 8-bit multiplexed + * output mode */ - /* OV7640 is 8-bit only */ + /* OV7640 is 8-bit only */ - if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV7640) - i2c_w_mask(sd, 0x13, 0x00, 0x20); -/* } */ + if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV7640) + i2c_w_mask(sd, 0x13, 0x00, 0x20); /******** Clock programming ********/ /* The OV6620 needs special handling. This prevents the @@ -1675,14 +1606,14 @@ static int mode_init_ov_sensor_regs(struct sd *sd, /* Clock down */ i2c_w(sd, 0x2a, 0x04); - i2c_w(sd, 0x11, win->clockdiv); + i2c_w(sd, 0x11, sd->clockdiv); i2c_w(sd, 0x2a, 0x84); /* This next setting is critical. It seems to improve * the gain or the contrast. The "reserved" bits seem * to have some effect in this case. */ i2c_w(sd, 0x2d, 0x85); - } else if (win->clockdiv >= 0) { - i2c_w(sd, 0x11, win->clockdiv); + } else if (sd->clockdiv >= 0) { + i2c_w(sd, 0x11, sd->clockdiv); } /******** Special Features ********/ @@ -1702,7 +1633,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd, /* is fully tested. */ /* 7620/6620/6630? don't have register 0x35, so play it safe */ if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) { - if (win->width == 640 /*&& win->height == 480*/) + if (!qvga) i2c_w(sd, 0x35, 0x9e); else i2c_w(sd, 0x35, 0x1e); @@ -1710,33 +1641,31 @@ static int mode_init_ov_sensor_regs(struct sd *sd, return 0; } -static void sethflip(struct sd *sd) -{ - if (sd->gspca_dev.streaming) - ov51x_stop(sd); - i2c_w_mask(sd, OV7670_REG_MVFP, - OV7670_MVFP_MIRROR * sd->hflip, OV7670_MVFP_MIRROR); - if (sd->gspca_dev.streaming) - ov51x_restart(sd); -} - -static void setvflip(struct sd *sd) +static void sethvflip(struct sd *sd) { + if (sd->sensor != SEN_OV7670) + return; if (sd->gspca_dev.streaming) ov51x_stop(sd); i2c_w_mask(sd, OV7670_REG_MVFP, - OV7670_MVFP_VFLIP * sd->vflip, OV7670_MVFP_VFLIP); + OV7670_MVFP_MIRROR * sd->hflip + | OV7670_MVFP_VFLIP * sd->vflip, + OV7670_MVFP_MIRROR | OV7670_MVFP_VFLIP); if (sd->gspca_dev.streaming) ov51x_restart(sd); } -static int set_ov_sensor_window(struct sd *sd, - struct ovsensor_window *win) +static int set_ov_sensor_window(struct sd *sd) { + struct gspca_dev *gspca_dev; + int qvga; int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale; int ret, hstart, hstop, vstop, vstart; __u8 v; + gspca_dev = &sd->gspca_dev; + qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; + /* The different sensor ICs handle setting up of window differently. * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!! */ switch (sd->sensor) { @@ -1781,7 +1710,7 @@ static int set_ov_sensor_window(struct sd *sd, switch (sd->sensor) { case SEN_OV6620: case SEN_OV6630: - if (win->quarter) { /* QCIF */ + if (qvga) { /* QCIF */ hwscale = 0; vwscale = 0; } else { /* CIF */ @@ -1791,7 +1720,7 @@ static int set_ov_sensor_window(struct sd *sd, } break; case SEN_OV8610: - if (win->quarter) { /* QSVGA */ + if (qvga) { /* QSVGA */ hwscale = 1; vwscale = 1; } else { /* SVGA */ @@ -1800,7 +1729,7 @@ static int set_ov_sensor_window(struct sd *sd, } break; default: /* SEN_OV7xx0 */ - if (win->quarter) { /* QVGA */ + if (qvga) { /* QVGA */ hwscale = 1; vwscale = 0; } else { /* VGA */ @@ -1809,7 +1738,7 @@ static int set_ov_sensor_window(struct sd *sd, } } - ret = mode_init_ov_sensor_regs(sd, win); + ret = mode_init_ov_sensor_regs(sd); if (ret < 0) return ret; @@ -1830,7 +1759,7 @@ static int set_ov_sensor_window(struct sd *sd, /* I can hard code this for OV7670s */ /* Yes, these numbers do look odd, but they're tested and work! */ if (sd->sensor == SEN_OV7670) { - if (win->quarter) { /* QVGA from ov7670.c by + if (qvga) { /* QVGA from ov7670.c by * Jonathan Corbet */ hstart = 164; hstop = 20; @@ -1844,76 +1773,45 @@ static int set_ov_sensor_window(struct sd *sd, } /* OV7670 hardware window registers are split across * multiple locations */ - i2c_w(sd, OV7670_REG_HSTART, (hstart >> 3) & 0xff); - i2c_w(sd, OV7670_REG_HSTOP, (hstop >> 3) & 0xff); + i2c_w(sd, OV7670_REG_HSTART, hstart >> 3); + i2c_w(sd, OV7670_REG_HSTOP, hstop >> 3); v = i2c_r(sd, OV7670_REG_HREF); v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x07); msleep(10); /* need to sleep between read and write to * same reg! */ i2c_w(sd, OV7670_REG_HREF, v); - i2c_w(sd, OV7670_REG_VSTART, (vstart >> 2) & 0xff); - i2c_w(sd, OV7670_REG_VSTOP, (vstop >> 2) & 0xff); + i2c_w(sd, OV7670_REG_VSTART, vstart >> 2); + i2c_w(sd, OV7670_REG_VSTOP, vstop >> 2); v = i2c_r(sd, OV7670_REG_VREF); v = (v & 0xc0) | ((vstop & 0x3) << 2) | (vstart & 0x03); msleep(10); /* need to sleep between read and write to * same reg! */ i2c_w(sd, OV7670_REG_VREF, v); - sethflip(sd); - setvflip(sd); + sethvflip(sd); } else { - i2c_w(sd, 0x17, hwsbase + (win->x >> hwscale)); - i2c_w(sd, 0x18, hwebase + ((win->x + win->width) >> hwscale)); - i2c_w(sd, 0x19, vwsbase + (win->y >> vwscale)); - i2c_w(sd, 0x1a, vwebase + ((win->y + win->height) >> vwscale)); + i2c_w(sd, 0x17, hwsbase); + i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale)); + i2c_w(sd, 0x19, vwsbase); + i2c_w(sd, 0x1a, vwebase + (sd->gspca_dev.height >> vwscale)); } return 0; } -static int ov_sensor_mode_setup(struct sd *sd, - int width, int height) -{ - struct ovsensor_window win; - -/* win.format = mode; */ - - /* Unless subcapture is enabled, - * center the image window and downsample - * if possible to increase the field of view */ - /* NOTE: OV518(+) and OV519 does downsampling on its own */ - win.width = width; - win.height = height; - if (width == sd->maxwidth) - win.quarter = 0; - else - win.quarter = 1; - - /* Center it */ - win.x = (win.width - width) / 2; - win.y = (win.height - height) / 2; - - /* Clock is determined by OV519 frame rate code */ - win.clockdiv = sd->clockdiv; - - PDEBUG(D_CONF, "Setting clock divider to %d", win.clockdiv); - return set_ov_sensor_window(sd, &win); -} - /* -- start the camera -- */ static void sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int ret; - - ret = ov519_mode_init_regs(sd, gspca_dev->width, gspca_dev->height); + ret = ov519_mode_init_regs(sd); if (ret < 0) goto out; - ret = ov_sensor_mode_setup(sd, gspca_dev->width, gspca_dev->height); + ret = set_ov_sensor_window(sd); if (ret < 0) goto out; - ret = ov51x_restart((struct sd *) gspca_dev); + ret = ov51x_restart(sd); if (ret < 0) goto out; PDEBUG(D_STREAM, "camera started alt: 0x%02x", gspca_dev->alt); @@ -1987,12 +1885,10 @@ static void setbrightness(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int val; -/* int was_streaming; */ val = sd->brightness; PDEBUG(D_CONF, "brightness:%d", val); -/* was_streaming = gspca_dev->streaming; - * if (was_streaming) +/* if (gspca_dev->streaming) * ov51x_stop(sd); */ switch (sd->sensor) { case SEN_OV8610: @@ -2010,12 +1906,12 @@ static void setbrightness(struct gspca_dev *gspca_dev) i2c_w(sd, OV7610_REG_BRT, val); break; case SEN_OV7670: -/*jfm - from windblows +/*win trace * i2c_w_mask(sd, OV7670_REG_COM8, 0, OV7670_COM8_AEC); */ i2c_w(sd, OV7670_REG_BRIGHT, ov7670_abs_to_sm(val)); break; } -/* if (was_streaming) +/* if (gspca_dev->streaming) * ov51x_restart(sd); */ } @@ -2023,12 +1919,10 @@ static void setcontrast(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int val; -/* int was_streaming; */ val = sd->contrast; PDEBUG(D_CONF, "contrast:%d", val); -/* was_streaming = gspca_dev->streaming; - if (was_streaming) +/* if (gspca_dev->streaming) ov51x_stop(sd); */ switch (sd->sensor) { case SEN_OV7610: @@ -2065,7 +1959,7 @@ static void setcontrast(struct gspca_dev *gspca_dev) i2c_w(sd, OV7670_REG_CONTRAS, val >> 1); break; } -/* if (was_streaming) +/* if (gspca_dev->streaming) ov51x_restart(sd); */ } @@ -2073,12 +1967,10 @@ static void setcolors(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int val; -/* int was_streaming; */ val = sd->colors; PDEBUG(D_CONF, "saturation:%d", val); -/* was_streaming = gspca_dev->streaming; - if (was_streaming) +/* if (gspca_dev->streaming) ov51x_stop(sd); */ switch (sd->sensor) { case SEN_OV8610: @@ -2104,7 +1996,7 @@ static void setcolors(struct gspca_dev *gspca_dev) /* set REG_COM13 values for UV sat auto mode */ break; } -/* if (was_streaming) +/* if (gspca_dev->streaming) ov51x_restart(sd); */ } @@ -2164,7 +2056,7 @@ static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->hflip = val; - sethflip(sd); + sethvflip(sd); return 0; } @@ -2181,7 +2073,7 @@ static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->vflip = val; - setvflip(sd); + sethvflip(sd); return 0; } -- cgit v1.2.3 From cebf3b67f7f80fd69bd1ff5787fee69ab8fd3c2a Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sun, 3 Aug 2008 07:52:53 -0300 Subject: V4L/DVB (8604): gspca: Fix of "scheduling while atomic" crash. The crash is due to USB exchanges done at interrupt level. These exchanges, tied to autogain, are now done by the application. Also, there is a fix about autogain start. Concerned subdrivers: etoms, pac7311, sonixj and spca561. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/etoms.c | 133 +++++++++++++++++++----------------- drivers/media/video/gspca/pac7311.c | 54 +++++++++------ drivers/media/video/gspca/sonixj.c | 57 +++++++++++----- drivers/media/video/gspca/spca561.c | 42 +++++++----- 4 files changed, 171 insertions(+), 115 deletions(-) diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c index 6a4e68286ef4..1dbe92d01e6a 100644 --- a/drivers/media/video/gspca/etoms.c +++ b/drivers/media/video/gspca/etoms.c @@ -461,6 +461,52 @@ static void Et_init2(struct gspca_dev *gspca_dev) reg_w_val(gspca_dev, 0x80, 0x20); /* 0x20; */ } +static void setbrightness(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + __u8 brightness = sd->brightness; + + for (i = 0; i < 4; i++) + reg_w_val(gspca_dev, ET_O_RED + i, brightness); +} + +static void getbrightness(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + int brightness = 0; + + for (i = 0; i < 4; i++) { + reg_r(gspca_dev, ET_O_RED + i, 1); + brightness += gspca_dev->usb_buf[0]; + } + sd->brightness = brightness >> 3; +} + +static void setcontrast(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + __u8 RGBG[] = { 0x80, 0x80, 0x80, 0x80, 0x00, 0x00 }; + __u8 contrast = sd->contrast; + + memset(RGBG, contrast, sizeof(RGBG) - 2); + reg_w(gspca_dev, ET_G_RED, RGBG, 6); +} + +static void getcontrast(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + int contrast = 0; + + for (i = 0; i < 4; i++) { + reg_r(gspca_dev, ET_G_RED + i, 1); + contrast += gspca_dev->usb_buf[0]; + } + sd->contrast = contrast >> 2; +} + static void setcolors(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -492,6 +538,16 @@ static void getcolors(struct gspca_dev *gspca_dev) } } +static void setautogain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->autogain) + sd->ag_cnt = AG_CNT_START; + else + sd->ag_cnt = -1; +} + static void Et_init1(struct gspca_dev *gspca_dev) { __u8 value; @@ -614,6 +670,7 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->contrast = CONTRAST_DEF; sd->colors = COLOR_DEF; sd->autogain = AUTOGAIN_DEF; + sd->ag_cnt = -1; return 0; } @@ -641,6 +698,8 @@ static void sd_start(struct gspca_dev *gspca_dev) else Et_init2(gspca_dev); + setautogain(gspca_dev); + reg_w_val(gspca_dev, ET_RESET_ALL, 0x08); et_video(gspca_dev, 1); /* video on */ } @@ -658,52 +717,6 @@ static void sd_close(struct gspca_dev *gspca_dev) { } -static void setbrightness(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - int i; - __u8 brightness = sd->brightness; - - for (i = 0; i < 4; i++) - reg_w_val(gspca_dev, ET_O_RED + i, brightness); -} - -static void getbrightness(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - int i; - int brightness = 0; - - for (i = 0; i < 4; i++) { - reg_r(gspca_dev, ET_O_RED + i, 1); - brightness += gspca_dev->usb_buf[0]; - } - sd->brightness = brightness >> 3; -} - -static void setcontrast(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - __u8 RGBG[] = { 0x80, 0x80, 0x80, 0x80, 0x00, 0x00 }; - __u8 contrast = sd->contrast; - - memset(RGBG, contrast, sizeof(RGBG) - 2); - reg_w(gspca_dev, ET_G_RED, RGBG, 6); -} - -static void getcontrast(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - int i; - int contrast = 0; - - for (i = 0; i < 4; i++) { - reg_r(gspca_dev, ET_G_RED + i, 1); - contrast += gspca_dev->usb_buf[0]; - } - sd->contrast = contrast >> 2; -} - static __u8 Et_getgainG(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -733,15 +746,22 @@ static void Et_setgainG(struct gspca_dev *gspca_dev, __u8 gain) #define LIMIT(color) \ (unsigned char)((color > 0xff)?0xff:((color < 0)?0:color)) -static void setautogain(struct gspca_dev *gspca_dev) +static void do_autogain(struct gspca_dev *gspca_dev) { - __u8 luma = 0; + struct sd *sd = (struct sd *) gspca_dev; + __u8 luma; __u8 luma_mean = 128; __u8 luma_delta = 20; __u8 spring = 4; - int Gbright = 0; + int Gbright; __u8 r, g, b; + if (sd->ag_cnt < 0) + return; + if (--sd->ag_cnt >= 0) + return; + sd->ag_cnt = AG_CNT_START; + Gbright = Et_getgainG(gspca_dev); reg_r(gspca_dev, ET_LUMA_CENTER, 4); g = (gspca_dev->usb_buf[0] + gspca_dev->usb_buf[3]) >> 1; @@ -768,7 +788,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, __u8 *data, /* isoc packet */ int len) /* iso packet length */ { - struct sd *sd; int seqframe; seqframe = data[0] & 0x3f; @@ -783,13 +802,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len); - sd = (struct sd *) gspca_dev; - if (sd->ag_cnt >= 0) { - if (--sd->ag_cnt < 0) { - sd->ag_cnt = AG_CNT_START; - setautogain(gspca_dev); - } - } return; } if (len) { @@ -862,10 +874,8 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->autogain = val; - if (val) - sd->ag_cnt = AG_CNT_START; - else - sd->ag_cnt = -1; + if (gspca_dev->streaming) + setautogain(gspca_dev); return 0; } @@ -889,6 +899,7 @@ static struct sd_desc sd_desc = { .stop0 = sd_stop0, .close = sd_close, .pkt_scan = sd_pkt_scan, + .dq_callback = do_autogain, }; /* -- module initialisation -- */ diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index ea3d7021f401..815bea6edc44 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -31,7 +31,9 @@ MODULE_LICENSE("GPL"); struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ - int avg_lum; + int lum_sum; + atomic_t avg_lum; + atomic_t do_gain; unsigned char brightness; unsigned char contrast; @@ -271,6 +273,7 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->contrast = CONTRAST_DEF; sd->colors = COLOR_DEF; sd->autogain = AUTOGAIN_DEF; + sd->ag_cnt = -1; return 0; } @@ -311,6 +314,18 @@ static void setcolors(struct gspca_dev *gspca_dev) PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors); } +static void setautogain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->autogain) { + sd->lum_sum = 0; + sd->ag_cnt = AG_CNT_START; + } else { + sd->ag_cnt = -1; + } +} + /* this function is called at open time */ static int sd_open(struct gspca_dev *gspca_dev) { @@ -320,8 +335,6 @@ static int sd_open(struct gspca_dev *gspca_dev) static void sd_start(struct gspca_dev *gspca_dev) { - struct sd *sd = (struct sd *) gspca_dev; - reg_w(gspca_dev, 0xff, 0x01); reg_w_buf(gspca_dev, 0x0002, "\x48\x0a\x40\x08\x00\x00\x08\x00", 8); reg_w_buf(gspca_dev, 0x000a, "\x06\xff\x11\xff\x5a\x30\x90\x4c", 8); @@ -394,6 +407,7 @@ static void sd_start(struct gspca_dev *gspca_dev) setcontrast(gspca_dev); setbrightness(gspca_dev); setcolors(gspca_dev); + setautogain(gspca_dev); /* set correct resolution */ switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) { @@ -431,13 +445,6 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x78, 0x04); reg_w(gspca_dev, 0x78, 0x05); - - if (sd->autogain) { - sd->ag_cnt = AG_CNT_START; - sd->avg_lum = 0; - } else { - sd->ag_cnt = -1; - } } static void sd_stopN(struct gspca_dev *gspca_dev) @@ -473,13 +480,20 @@ static void sd_close(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */ } -static void setautogain(struct gspca_dev *gspca_dev, int luma) +static void do_autogain(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; + int luma; int luma_mean = 128; int luma_delta = 20; __u8 spring = 5; int Gbright; + if (!atomic_read(&sd->do_gain)) + return; + atomic_set(&sd->do_gain, 0); + + luma = atomic_read(&sd->avg_lum); Gbright = reg_r(gspca_dev, 0x02); PDEBUG(D_FRAM, "luma mean %d", luma); if (luma < luma_mean - luma_delta || @@ -523,12 +537,13 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, /* start of frame */ if (sd->ag_cnt >= 0 && p > 28) { - sd->avg_lum += data[p - 23]; + sd->lum_sum += data[p - 23]; if (--sd->ag_cnt < 0) { sd->ag_cnt = AG_CNT_START; - setautogain(gspca_dev, - sd->avg_lum / AG_CNT_START); - sd->avg_lum = 0; + atomic_set(&sd->avg_lum, + sd->lum_sum / AG_CNT_START); + sd->lum_sum = 0; + atomic_set(&sd->do_gain, 1); } } @@ -677,12 +692,8 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->autogain = val; - if (val) { - sd->ag_cnt = AG_CNT_START; - sd->avg_lum = 0; - } else { - sd->ag_cnt = -1; - } + if (gspca_dev->streaming) + setautogain(gspca_dev); return 0; } @@ -706,6 +717,7 @@ static struct sd_desc sd_desc = { .stop0 = sd_stop0, .close = sd_close, .pkt_scan = sd_pkt_scan, + .dq_callback = do_autogain, }; /* -- module initialisation -- */ diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index b60ff600a757..245a30ec5fb1 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -32,7 +32,7 @@ MODULE_LICENSE("GPL"); struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ - int avg_lum; + atomic_t avg_lum; unsigned int exposure; unsigned short brightness; @@ -781,6 +781,8 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->contrast = CONTRAST_DEF; sd->colors = COLOR_DEF; sd->autogain = AUTOGAIN_DEF; + sd->ag_cnt = -1; + return 0; } @@ -946,6 +948,22 @@ static void setcolors(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x05, data); } +static void setautogain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + switch (sd->sensor) { + case SENSOR_HV7131R: + case SENSOR_MO4000: + case SENSOR_MI0360: + if (sd->autogain) + sd->ag_cnt = AG_CNT_START; + else + sd->ag_cnt = -1; + break; + } +} + /* -- start the camera -- */ static void sd_start(struct gspca_dev *gspca_dev) { @@ -1078,6 +1096,7 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x01, reg1); setbrightness(gspca_dev); setcontrast(gspca_dev); + setautogain(gspca_dev); } static void sd_stopN(struct gspca_dev *gspca_dev) @@ -1124,16 +1143,23 @@ static void sd_close(struct gspca_dev *gspca_dev) { } -static void setautogain(struct gspca_dev *gspca_dev) +static void do_autogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - /* Thanks S., without your advice, autobright should not work :) */ int delta; - int expotimes = 0; + int expotimes; __u8 luma_mean = 130; __u8 luma_delta = 20; - delta = sd->avg_lum; + /* Thanks S., without your advice, autobright should not work :) */ + if (sd->ag_cnt < 0) + return; + if (--sd->ag_cnt >= 0) + return; + sd->ag_cnt = AG_CNT_START; + + delta = atomic_read(&sd->avg_lum); + PDEBUG(D_FRAM, "mean lum %d", delta); if (delta < luma_mean - luma_delta || delta > luma_mean + luma_delta) { switch (sd->sensor) { @@ -1145,8 +1171,9 @@ static void setautogain(struct gspca_dev *gspca_dev) sd->exposure = setexposure(gspca_dev, (unsigned int) (expotimes << 8)); break; - case SENSOR_MO4000: - case SENSOR_MI0360: + default: +/* case SENSOR_MO4000: */ +/* case SENSOR_MI0360: */ expotimes = sd->exposure; expotimes += (luma_mean - delta) >> 6; if (expotimes < 0) @@ -1159,6 +1186,8 @@ static void setautogain(struct gspca_dev *gspca_dev) } } +/* scan the URB packets */ +/* This function is run at interrupt level. */ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ @@ -1175,9 +1204,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, frame, data, sof + 2); if (sd->ag_cnt < 0) return; - if (--sd->ag_cnt >= 0) - return; - sd->ag_cnt = AG_CNT_START; /* w1 w2 w3 */ /* w4 w5 w6 */ /* w7 w8 */ @@ -1192,9 +1218,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, /* w5 */ avg_lum += ((data[sof + 31] << 8) | data[sof + 32]) >> 4; avg_lum >>= 4; - sd->avg_lum = avg_lum; - PDEBUG(D_PACK, "mean lum %d", avg_lum); - setautogain(gspca_dev); + atomic_set(&sd->avg_lum, avg_lum); return; } if (gspca_dev->last_packet_type == LAST_PACKET) { @@ -1321,10 +1345,8 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->autogain = val; - if (val) - sd->ag_cnt = AG_CNT_START; - else - sd->ag_cnt = -1; + if (gspca_dev->streaming) + setautogain(gspca_dev); return 0; } @@ -1348,6 +1370,7 @@ static const struct sd_desc sd_desc = { .stop0 = sd_stop0, .close = sd_close, .pkt_scan = sd_pkt_scan, + .dq_callback = do_autogain, }; /* -- module initialisation -- */ diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index a26174508cb9..1073ac3d2ec6 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -644,6 +644,18 @@ static void setcontrast(struct gspca_dev *gspca_dev) } } +static void setautogain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->chip_revision == Rev072A) { + if (sd->autogain) + sd->ag_cnt = AG_CNT_START; + else + sd->ag_cnt = -1; + } +} + static void sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -671,6 +683,7 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w_val(dev, 0x8500, mode); /* mode */ reg_w_val(dev, 0x8700, Clck); /* 0x27 clock */ reg_w_val(dev, 0x8112, 0x10 | 0x20); + setautogain(gspca_dev); break; default: /* case Rev012A: */ @@ -720,18 +733,24 @@ static void sd_close(struct gspca_dev *gspca_dev) reg_w_val(gspca_dev->dev, 0x8114, 0); } -static void setautogain(struct gspca_dev *gspca_dev) +static void do_autogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int expotimes = 0; - int pixelclk = 0; - int gainG = 0; + int expotimes; + int pixelclk; + int gainG; __u8 R, Gr, Gb, B; int y; __u8 luma_mean = 110; __u8 luma_delta = 20; __u8 spring = 4; + if (sd->ag_cnt < 0) + return; + if (--sd->ag_cnt >= 0) + return; + sd->ag_cnt = AG_CNT_START; + switch (sd->chip_revision) { case Rev072A: reg_r(gspca_dev, 0x8621, 1); @@ -795,18 +814,10 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, __u8 *data, /* isoc packet */ int len) /* iso packet length */ { - struct sd *sd = (struct sd *) gspca_dev; - switch (data[0]) { case 0: /* start of frame */ frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); - if (sd->ag_cnt >= 0) { - if (--sd->ag_cnt < 0) { - sd->ag_cnt = AG_CNT_START; - setautogain(gspca_dev); - } - } data += SPCA561_OFFSET_DATA; len -= SPCA561_OFFSET_DATA; if (data[1] & 0x10) { @@ -944,10 +955,8 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->autogain = val; - if (val) - sd->ag_cnt = AG_CNT_START; - else - sd->ag_cnt = -1; + if (gspca_dev->streaming) + setautogain(gspca_dev); return 0; } @@ -971,6 +980,7 @@ static const struct sd_desc sd_desc = { .stop0 = sd_stop0, .close = sd_close, .pkt_scan = sd_pkt_scan, + .dq_callback = do_autogain, }; /* -- module initialisation -- */ -- cgit v1.2.3 From fcf5cb2406827fc9d3f3fe260ac883ef72b8bac0 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Sun, 3 Aug 2008 07:58:54 -0300 Subject: V4L/DVB (8605): gspca: Fix of gspca_zc3xx oops - 2.6.27-rc1 Bad mini/max check in setting control values (the gamma in zc3xx could be set to null). Signed-off-by: Rabin Vincent Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 7f773e378979..15d302b28b79 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -904,7 +904,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv, if (ctrl->id != ctrls->qctrl.id) continue; if (ctrl->value < ctrls->qctrl.minimum - && ctrl->value > ctrls->qctrl.maximum) + || ctrl->value > ctrls->qctrl.maximum) return -ERANGE; PDEBUG(D_CONF, "set ctrl [%08x] = %d", ctrl->id, ctrl->value); if (mutex_lock_interruptible(&gspca_dev->usb_lock)) -- cgit v1.2.3 From d483b730681fa527f343dcc859185e06d60ae121 Mon Sep 17 00:00:00 2001 From: Robert Lowery Date: Wed, 30 Jul 2008 19:43:11 -0300 Subject: V4L/DVB (8607): cxusb: fix OOPS and broken tuning regression on FusionHDTV Dual Digital 4 quoting Robert Lowery: I think I've found the cause of the oops. [...] BTW it appears I have fixed my tuning problems with the updated patch below. This reverts a change Mauro made a while back. All is good now :) [...] The good news is that I've got a better patch that definitely works this time and even better, makes use of the standard firmware (rather than the Australian specific one). ...based on an earlier patch by Hans-Frieder Vogt: http://www.linuxtv.org/pipermail/linux-dvb/2008-May/026280.html Signed-off-by: Robert Lowery Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/cxusb.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index 578afce6884c..aaa0b6f0b521 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -565,7 +565,8 @@ static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap) static int dvico_bluebird_xc2028_callback(void *ptr, int command, int arg) { - struct dvb_usb_device *d = ptr; + struct dvb_usb_adapter *adap = ptr; + struct dvb_usb_device *d = adap->dev; switch (command) { case XC2028_TUNER_RESET: @@ -593,9 +594,9 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap) .callback = dvico_bluebird_xc2028_callback, }; static struct xc2028_ctrl ctl = { - .fname = "xc3028-dvico-au-01.fw", + .fname = "xc3028-v27.fw", .max_len = 64, - .scode_table = XC3028_FE_ZARLINK456, + .demod = XC3028_FE_ZARLINK456, }; fe = dvb_attach(xc2028_attach, adap->fe, &cfg); -- cgit v1.2.3 From 01c1e4ca8ec39d21be0cd9d1b300d479de97298a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 1 Aug 2008 19:48:51 -0300 Subject: V4L/DVB (8609): media: Clean up platform_driver_unregister() bogosity. So, platform_driver_unregister() doesn't actually have a return value, nor do any of the void __exit routines. It's reassuring to know that people copy and paste blindly. This completely blew up my compiler. Signed-off-by: Paul Mundt Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pxa_camera.c | 2 +- drivers/media/video/sh_mobile_ceu_camera.c | 2 +- drivers/media/video/soc_camera_platform.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index b15f82c49766..28d8fd0679b4 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1198,7 +1198,7 @@ static int __devinit pxa_camera_init(void) static void __exit pxa_camera_exit(void) { - return platform_driver_unregister(&pxa_camera_driver); + platform_driver_unregister(&pxa_camera_driver); } module_init(pxa_camera_init); diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index f7ca3cb9340a..318754e73132 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -647,7 +647,7 @@ static int __init sh_mobile_ceu_init(void) static void __exit sh_mobile_ceu_exit(void) { - return platform_driver_unregister(&sh_mobile_ceu_driver); + platform_driver_unregister(&sh_mobile_ceu_driver); } module_init(sh_mobile_ceu_init); diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c index eefb0327ebb6..1adc257ebdb9 100644 --- a/drivers/media/video/soc_camera_platform.c +++ b/drivers/media/video/soc_camera_platform.c @@ -187,7 +187,7 @@ static int __init soc_camera_platform_module_init(void) static void __exit soc_camera_platform_module_exit(void) { - return platform_driver_unregister(&soc_camera_platform_driver); + platform_driver_unregister(&soc_camera_platform_driver); } module_init(soc_camera_platform_module_init); -- cgit v1.2.3 From 2e521061db61a35dd64ea85a1642f9a9dfde2872 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Fri, 1 Aug 2008 20:14:50 -0300 Subject: V4L/DVB (8610): Add suspend/resume capabilities to soc_camera. Add suspend/resume hooks to call soc operation specific suspend and resume functions. This ensures the camera chip has been previously resumed, as well as the camera bus. These hooks in camera chip drivers should save/restore chip context between suspend and resume time. Signed-off-by: Robert Jarzmik Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/soc_camera.c | 26 ++++++++++++++++++++++++++ include/media/soc_camera.h | 5 +++++ 2 files changed, 31 insertions(+) diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index b6be5ee678b6..66ebe5956a87 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -732,10 +732,36 @@ static int soc_camera_remove(struct device *dev) return 0; } +static int soc_camera_suspend(struct device *dev, pm_message_t state) +{ + struct soc_camera_device *icd = to_soc_camera_dev(dev); + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + int ret = 0; + + if (ici->ops->suspend) + ret = ici->ops->suspend(icd, state); + + return ret; +} + +static int soc_camera_resume(struct device *dev) +{ + struct soc_camera_device *icd = to_soc_camera_dev(dev); + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + int ret = 0; + + if (ici->ops->resume) + ret = ici->ops->resume(icd); + + return ret; +} + static struct bus_type soc_camera_bus_type = { .name = "soc-camera", .probe = soc_camera_probe, .remove = soc_camera_remove, + .suspend = soc_camera_suspend, + .resume = soc_camera_resume, }; static struct device_driver ic_drv = { diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index 1de98f150e99..d548de326722 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -14,6 +14,7 @@ #include #include +#include struct soc_camera_device { struct list_head list; @@ -63,6 +64,8 @@ struct soc_camera_host_ops { struct module *owner; int (*add)(struct soc_camera_device *); void (*remove)(struct soc_camera_device *); + int (*suspend)(struct soc_camera_device *, pm_message_t state); + int (*resume)(struct soc_camera_device *); int (*set_fmt_cap)(struct soc_camera_device *, __u32, struct v4l2_rect *); int (*try_fmt_cap)(struct soc_camera_device *, struct v4l2_format *); @@ -111,6 +114,8 @@ struct soc_camera_ops { struct module *owner; int (*probe)(struct soc_camera_device *); void (*remove)(struct soc_camera_device *); + int (*suspend)(struct soc_camera_device *, pm_message_t state); + int (*resume)(struct soc_camera_device *); int (*init)(struct soc_camera_device *); int (*release)(struct soc_camera_device *); int (*start_capture)(struct soc_camera_device *); -- cgit v1.2.3 From 3f6ac497b036533d1a63ba04fdbe710c55e14cda Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sat, 2 Aug 2008 07:10:04 -0300 Subject: V4L/DVB (8611): Add suspend/resume to pxa_camera driver PXA suspend switches off DMA core, which loses all context of previously assigned descriptors. As pxa_camera driver relies on DMA transfers, setup the lost descriptors on resume and retrigger frame acquisition if needed. Signed-off-by: Robert Jarzmik Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pxa_camera.c | 56 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 28d8fd0679b4..ead87ddaf7fb 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -128,6 +128,8 @@ struct pxa_camera_dev { struct pxa_buffer *active; struct pxa_dma_desc *sg_tail[3]; + + u32 save_cicr[5]; }; static const char *pxa_cam_driver_description = "PXA_Camera"; @@ -997,10 +999,64 @@ static int pxa_camera_querycap(struct soc_camera_host *ici, return 0; } +static int pxa_camera_suspend(struct soc_camera_device *icd, pm_message_t state) +{ + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + struct pxa_camera_dev *pcdev = ici->priv; + int i = 0, ret = 0; + + pcdev->save_cicr[i++] = CICR0; + pcdev->save_cicr[i++] = CICR1; + pcdev->save_cicr[i++] = CICR2; + pcdev->save_cicr[i++] = CICR3; + pcdev->save_cicr[i++] = CICR4; + + if ((pcdev->icd) && (pcdev->icd->ops->suspend)) + ret = pcdev->icd->ops->suspend(pcdev->icd, state); + + return ret; +} + +static int pxa_camera_resume(struct soc_camera_device *icd) +{ + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + struct pxa_camera_dev *pcdev = ici->priv; + int i = 0, ret = 0; + + DRCMR68 = pcdev->dma_chans[0] | DRCMR_MAPVLD; + DRCMR69 = pcdev->dma_chans[1] | DRCMR_MAPVLD; + DRCMR70 = pcdev->dma_chans[2] | DRCMR_MAPVLD; + + CICR0 = pcdev->save_cicr[i++] & ~CICR0_ENB; + CICR1 = pcdev->save_cicr[i++]; + CICR2 = pcdev->save_cicr[i++]; + CICR3 = pcdev->save_cicr[i++]; + CICR4 = pcdev->save_cicr[i++]; + + if ((pcdev->icd) && (pcdev->icd->ops->resume)) + ret = pcdev->icd->ops->resume(pcdev->icd); + + /* Restart frame capture if active buffer exists */ + if (!ret && pcdev->active) { + /* Reset the FIFOs */ + CIFR |= CIFR_RESET_F; + /* Enable End-Of-Frame Interrupt */ + CICR0 &= ~CICR0_EOFM; + /* Restart the Capture Interface */ + CICR0 |= CICR0_ENB; + } + + return ret; +} + static struct soc_camera_host_ops pxa_soc_camera_host_ops = { .owner = THIS_MODULE, .add = pxa_camera_add_device, .remove = pxa_camera_remove_device, + .suspend = pxa_camera_suspend, + .resume = pxa_camera_resume, .set_fmt_cap = pxa_camera_set_fmt_cap, .try_fmt_cap = pxa_camera_try_fmt_cap, .init_videobuf = pxa_camera_init_videobuf, -- cgit v1.2.3 From 835f09c6594aa98cbfae05c5466a81fda3081d2c Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 30 Jul 2008 18:54:48 -0300 Subject: V4L/DVB (8616): uvcvideo: Add support for two Bison Electronics webcams The Bison Electronics 5986:0300 and 5986:0303 webcams require the UVC_QUIRK_PROBE_MINMAX quirk. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_driver.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index b3c4d75e8490..7e102034d38d 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1884,7 +1884,7 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, - /* Packard Bell OEM Webcam */ + /* Packard Bell OEM Webcam - Bison Electronics */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x5986, @@ -1893,7 +1893,7 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, - /* Acer Crystal Eye webcam */ + /* Acer Crystal Eye webcam - Bison Electronics */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x5986, @@ -1902,7 +1902,7 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, - /* Medion Akoya Mini E1210 */ + /* Medion Akoya Mini E1210 - Bison Electronics */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x5986, @@ -1911,7 +1911,7 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, - /* Acer OrbiCam - Unknown vendor */ + /* Acer OrbiCam - Bison Electronics */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x5986, @@ -1920,6 +1920,24 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Bison Electronics */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0300, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Clevo M570TU - Bison Electronics */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0303, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, /* Generic USB Video Class */ { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) }, {} -- cgit v1.2.3 From 04793dd041bbb88a39b768b714c725de2c339b51 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 31 Jul 2008 17:11:12 -0300 Subject: V4L/DVB (8617): uvcvideo: don't use stack-based buffers for USB transfers. Data buffers on the stack are not allowed for USB I/O. Use dynamically allocated buffers instead. Signed-off-by: Bruce Schmid Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_ctrl.c | 33 +++++++++++++++++++++------------ drivers/media/video/uvc/uvc_video.c | 33 ++++++++++++++++++++++----------- 2 files changed, 43 insertions(+), 23 deletions(-) diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index 626f4ad7e876..6ef3e5297de8 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -585,13 +585,17 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video, struct uvc_control_mapping *mapping; struct uvc_menu_info *menu; unsigned int i; - __u8 data[8]; + __u8 *data; int ret; ctrl = uvc_find_control(video, v4l2_ctrl->id, &mapping); if (ctrl == NULL) return -EINVAL; + data = kmalloc(8, GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + memset(v4l2_ctrl, 0, sizeof *v4l2_ctrl); v4l2_ctrl->id = mapping->id; v4l2_ctrl->type = mapping->v4l2_type; @@ -604,8 +608,8 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video, if (ctrl->info->flags & UVC_CONTROL_GET_DEF) { if ((ret = uvc_query_ctrl(video->dev, GET_DEF, ctrl->entity->id, video->dev->intfnum, ctrl->info->selector, - &data, ctrl->info->size)) < 0) - return ret; + data, ctrl->info->size)) < 0) + goto out; v4l2_ctrl->default_value = uvc_get_le_value(data, mapping); } @@ -623,13 +627,15 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video, } } - return 0; + ret = 0; + goto out; case V4L2_CTRL_TYPE_BOOLEAN: v4l2_ctrl->minimum = 0; v4l2_ctrl->maximum = 1; v4l2_ctrl->step = 1; - return 0; + ret = 0; + goto out; default: break; @@ -638,26 +644,29 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video, if (ctrl->info->flags & UVC_CONTROL_GET_MIN) { if ((ret = uvc_query_ctrl(video->dev, GET_MIN, ctrl->entity->id, video->dev->intfnum, ctrl->info->selector, - &data, ctrl->info->size)) < 0) - return ret; + data, ctrl->info->size)) < 0) + goto out; v4l2_ctrl->minimum = uvc_get_le_value(data, mapping); } if (ctrl->info->flags & UVC_CONTROL_GET_MAX) { if ((ret = uvc_query_ctrl(video->dev, GET_MAX, ctrl->entity->id, video->dev->intfnum, ctrl->info->selector, - &data, ctrl->info->size)) < 0) - return ret; + data, ctrl->info->size)) < 0) + goto out; v4l2_ctrl->maximum = uvc_get_le_value(data, mapping); } if (ctrl->info->flags & UVC_CONTROL_GET_RES) { if ((ret = uvc_query_ctrl(video->dev, GET_RES, ctrl->entity->id, video->dev->intfnum, ctrl->info->selector, - &data, ctrl->info->size)) < 0) - return ret; + data, ctrl->info->size)) < 0) + goto out; v4l2_ctrl->step = uvc_get_le_value(data, mapping); } - return 0; + ret = 0; +out: + kfree(data); + return ret; } diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index ad63794fda77..6854ac78a161 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -90,17 +90,20 @@ static void uvc_fixup_buffer_size(struct uvc_video_device *video, static int uvc_get_video_ctrl(struct uvc_video_device *video, struct uvc_streaming_control *ctrl, int probe, __u8 query) { - __u8 data[34]; - __u8 size; + __u8 *data; + __u16 size; int ret; size = video->dev->uvc_version >= 0x0110 ? 34 : 26; + data = kmalloc(size, GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + ret = __uvc_query_ctrl(video->dev, query, 0, video->streaming->intfnum, - probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size, + probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, data, size, UVC_CTRL_STREAMING_TIMEOUT); - if (ret < 0) - return ret; + goto out; ctrl->bmHint = le16_to_cpup((__le16 *)&data[0]); ctrl->bFormatIndex = data[2]; @@ -136,17 +139,22 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video, */ uvc_fixup_buffer_size(video, ctrl); - return 0; +out: + kfree(data); + return ret; } int uvc_set_video_ctrl(struct uvc_video_device *video, struct uvc_streaming_control *ctrl, int probe) { - __u8 data[34]; - __u8 size; + __u8 *data; + __u16 size; + int ret; size = video->dev->uvc_version >= 0x0110 ? 34 : 26; - memset(data, 0, sizeof data); + data = kzalloc(size, GFP_KERNEL); + if (data == NULL) + return -ENOMEM; *(__le16 *)&data[0] = cpu_to_le16(ctrl->bmHint); data[2] = ctrl->bFormatIndex; @@ -174,10 +182,13 @@ int uvc_set_video_ctrl(struct uvc_video_device *video, data[33] = ctrl->bMaxVersion; } - return __uvc_query_ctrl(video->dev, SET_CUR, 0, + ret = __uvc_query_ctrl(video->dev, SET_CUR, 0, video->streaming->intfnum, - probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size, + probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, data, size, UVC_CTRL_STREAMING_TIMEOUT); + + kfree(data); + return ret; } int uvc_probe_video(struct uvc_video_device *video, -- cgit v1.2.3 From f7108f91cdcaca07c6a99777b2724093294f36ee Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Mon, 4 Aug 2008 10:56:07 +0200 Subject: cciss: return -EFAULT if copy_from_user() fails Return -EFAULT instead of -ENOMEM if copy_from_user() fails. Signed-off-by: Nikanth Karthikesan Acked-by: Mike Miller Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 0ce0c279aabf..aeaf465922e5 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1134,7 +1134,7 @@ static int cciss_ioctl(struct inode *inode, struct file *filep, if (ioc->Request.Type.Direction == XFER_WRITE) { if (copy_from_user (buff[sg_used], data_ptr, sz)) { - status = -ENOMEM; + status = -EFAULT; goto cleanup1; } } else { -- cgit v1.2.3 From a72da29b6cbc5cf918567f2a0d76df6871e94b01 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Mon, 4 Aug 2008 11:54:51 +0200 Subject: cciss: make rebuild_lun_table behave better This patch makes the rebuild_lun_table smart enough to not rip a logical volume out from under the OS. Without this fix if a customer is running hpacucli to monitor their storage the driver will blindly remove and re-add the disks whenever the utility calls the CCISS_REGNEWD ioctl. Unfortunately, both hpacucli and ACUXE call the ioctl repeatedly. Customers have reported IO coming to a standstill. Calling the ioctl is the problem, this patch is the fix. Signed-off-by: Stephen M. Cameron Signed-off-by: Mike Miller Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 336 ++++++++++++++++++++++++++++++++------------------ drivers/block/cciss.h | 2 + 2 files changed, 216 insertions(+), 122 deletions(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index aeaf465922e5..f9f10a15d253 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1330,13 +1330,46 @@ static void cciss_softirq_done(struct request *rq) spin_unlock_irqrestore(&h->lock, flags); } +/* This function gets the serial number of a logical drive via + * inquiry page 0x83. Serial no. is 16 bytes. If the serial + * number cannot be had, for whatever reason, 16 bytes of 0xff + * are returned instead. + */ +static void cciss_get_serial_no(int ctlr, int logvol, int withirq, + unsigned char *serial_no, int buflen) +{ +#define PAGE_83_INQ_BYTES 64 + int rc; + unsigned char *buf; + + if (buflen > 16) + buflen = 16; + memset(serial_no, 0xff, buflen); + buf = kzalloc(PAGE_83_INQ_BYTES, GFP_KERNEL); + if (!buf) + return; + memset(serial_no, 0, buflen); + if (withirq) + rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf, + PAGE_83_INQ_BYTES, 1, logvol, 0x83, TYPE_CMD); + else + rc = sendcmd(CISS_INQUIRY, ctlr, buf, + PAGE_83_INQ_BYTES, 1, logvol, 0x83, NULL, TYPE_CMD); + if (rc == IO_OK) + memcpy(serial_no, &buf[8], buflen); + kfree(buf); + return; +} + /* This function will check the usage_count of the drive to be updated/added. - * If the usage_count is zero then the drive information will be updated and - * the disk will be re-registered with the kernel. If not then it will be - * left alone for the next reboot. The exception to this is disk 0 which - * will always be left registered with the kernel since it is also the - * controller node. Any changes to disk 0 will show up on the next - * reboot. + * If the usage_count is zero and it is a heretofore unknown drive, or, + * the drive's capacity, geometry, or serial number has changed, + * then the drive information will be updated and the disk will be + * re-registered with the kernel. If these conditions don't hold, + * then it will be left alone for the next reboot. The exception to this + * is disk 0 which will always be left registered with the kernel since it + * is also the controller node. Any changes to disk 0 will show up on + * the next reboot. */ static void cciss_update_drive_info(int ctlr, int drv_index) { @@ -1347,9 +1380,65 @@ static void cciss_update_drive_info(int ctlr, int drv_index) sector_t total_size; unsigned long flags = 0; int ret = 0; + drive_info_struct *drvinfo; + + /* Get information about the disk and modify the driver structure */ + inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); + drvinfo = kmalloc(sizeof(*drvinfo), GFP_KERNEL); + if (inq_buff == NULL || drvinfo == NULL) + goto mem_msg; + + /* testing to see if 16-byte CDBs are already being used */ + if (h->cciss_read == CCISS_READ_16) { + cciss_read_capacity_16(h->ctlr, drv_index, 1, + &total_size, &block_size); + + } else { + cciss_read_capacity(ctlr, drv_index, 1, + &total_size, &block_size); + + /* if read_capacity returns all F's this volume is >2TB */ + /* in size so we switch to 16-byte CDB's for all */ + /* read/write ops */ + if (total_size == 0xFFFFFFFFULL) { + cciss_read_capacity_16(ctlr, drv_index, 1, + &total_size, &block_size); + h->cciss_read = CCISS_READ_16; + h->cciss_write = CCISS_WRITE_16; + } else { + h->cciss_read = CCISS_READ_10; + h->cciss_write = CCISS_WRITE_10; + } + } + + cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size, + inq_buff, drvinfo); + drvinfo->block_size = block_size; + drvinfo->nr_blocks = total_size + 1; + + cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no, + sizeof(drvinfo->serial_no)); + + /* Is it the same disk we already know, and nothing's changed? */ + if (h->drv[drv_index].raid_level != -1 && + ((memcmp(drvinfo->serial_no, + h->drv[drv_index].serial_no, 16) == 0) && + drvinfo->block_size == h->drv[drv_index].block_size && + drvinfo->nr_blocks == h->drv[drv_index].nr_blocks && + drvinfo->heads == h->drv[drv_index].heads && + drvinfo->sectors == h->drv[drv_index].sectors && + drvinfo->cylinders == h->drv[drv_index].cylinders)) { + /* The disk is unchanged, nothing to update */ + goto freeret; + } + + /* Not the same disk, or something's changed, so we need to */ + /* deregister it, and re-register it, if it's not in use. */ /* if the disk already exists then deregister it before proceeding */ - if (h->drv[drv_index].raid_level != -1) { + /* (unless it's the first disk (for the controller node). */ + if (h->drv[drv_index].raid_level != -1 && drv_index != 0) { + printk(KERN_WARNING "disk %d has changed.\n", drv_index); spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); h->drv[drv_index].busy_configuring = 1; spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); @@ -1364,43 +1453,23 @@ static void cciss_update_drive_info(int ctlr, int drv_index) /* If the disk is in use return */ if (ret) - return; - - /* Get information about the disk and modify the driver structure */ - inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); - if (inq_buff == NULL) - goto mem_msg; - - /* testing to see if 16-byte CDBs are already being used */ - if (h->cciss_read == CCISS_READ_16) { - cciss_read_capacity_16(h->ctlr, drv_index, 1, - &total_size, &block_size); - goto geo_inq; - } - - cciss_read_capacity(ctlr, drv_index, 1, - &total_size, &block_size); - - /* if read_capacity returns all F's this volume is >2TB in size */ - /* so we switch to 16-byte CDB's for all read/write ops */ - if (total_size == 0xFFFFFFFFULL) { - cciss_read_capacity_16(ctlr, drv_index, 1, - &total_size, &block_size); - h->cciss_read = CCISS_READ_16; - h->cciss_write = CCISS_WRITE_16; - } else { - h->cciss_read = CCISS_READ_10; - h->cciss_write = CCISS_WRITE_10; - } -geo_inq: - cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size, - inq_buff, &h->drv[drv_index]); + goto freeret; + + /* Save the new information from cciss_geometry_inquiry */ + /* and serial number inquiry. */ + h->drv[drv_index].block_size = drvinfo->block_size; + h->drv[drv_index].nr_blocks = drvinfo->nr_blocks; + h->drv[drv_index].heads = drvinfo->heads; + h->drv[drv_index].sectors = drvinfo->sectors; + h->drv[drv_index].cylinders = drvinfo->cylinders; + h->drv[drv_index].raid_level = drvinfo->raid_level; + memcpy(h->drv[drv_index].serial_no, drvinfo->serial_no, 16); ++h->num_luns; disk = h->gendisk[drv_index]; set_capacity(disk, h->drv[drv_index].nr_blocks); - /* if it's the controller it's already added */ + /* if it's the controller (if drv_index == 0) it's already added */ if (drv_index) { disk->queue = blk_init_queue(do_cciss_request, &h->lock); sprintf(disk->disk_name, "cciss/c%dd%d", ctlr, drv_index); @@ -1437,6 +1506,7 @@ geo_inq: freeret: kfree(inq_buff); + kfree(drvinfo); return; mem_msg: printk(KERN_ERR "cciss: out of memory\n"); @@ -1478,7 +1548,6 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) int ctlr = h->ctlr; int num_luns; ReportLunData_struct *ld_buff = NULL; - drive_info_struct *drv = NULL; int return_code; int listlength = 0; int i; @@ -1494,98 +1563,117 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) return -EBUSY; } h->busy_configuring = 1; + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - /* if del_disk is NULL then we are being called to add a new disk - * and update the logical drive table. If it is not NULL then - * we will check if the disk is in use or not. - */ - if (del_disk != NULL) { - drv = get_drv(del_disk); - drv->busy_configuring = 1; - spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - return_code = deregister_disk(del_disk, drv, 1); - drv->busy_configuring = 0; - h->busy_configuring = 0; - return return_code; - } else { - spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; - ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL); - if (ld_buff == NULL) - goto mem_msg; - - return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff, - sizeof(ReportLunData_struct), 0, - 0, 0, TYPE_CMD); - - if (return_code == IO_OK) { - listlength = - be32_to_cpu(*(__be32 *) ld_buff->LUNListLength); - } else { /* reading number of logical volumes failed */ - printk(KERN_WARNING "cciss: report logical volume" - " command failed\n"); - listlength = 0; - goto freeret; - } + ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL); + if (ld_buff == NULL) + goto mem_msg; + + return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff, + sizeof(ReportLunData_struct), 0, + 0, 0, TYPE_CMD); - num_luns = listlength / 8; /* 8 bytes per entry */ - if (num_luns > CISS_MAX_LUN) { - num_luns = CISS_MAX_LUN; - printk(KERN_WARNING "cciss: more luns configured" - " on controller than can be handled by" - " this driver.\n"); + if (return_code == IO_OK) + listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength); + else { /* reading number of logical volumes failed */ + printk(KERN_WARNING "cciss: report logical volume" + " command failed\n"); + listlength = 0; + goto freeret; + } + + num_luns = listlength / 8; /* 8 bytes per entry */ + if (num_luns > CISS_MAX_LUN) { + num_luns = CISS_MAX_LUN; + printk(KERN_WARNING "cciss: more luns configured" + " on controller than can be handled by" + " this driver.\n"); + } + + /* Compare controller drive array to driver's drive array */ + /* to see if any drives are missing on the controller due */ + /* to action of Array Config Utility (user deletes drive) */ + /* and deregister logical drives which have disappeared. */ + for (i = 0; i <= h->highest_lun; i++) { + int j; + drv_found = 0; + for (j = 0; j < num_luns; j++) { + memcpy(&lunid, &ld_buff->LUN[j][0], 4); + lunid = le32_to_cpu(lunid); + if (h->drv[i].LunID == lunid) { + drv_found = 1; + break; + } + } + if (!drv_found) { + /* Deregister it from the OS, it's gone. */ + spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); + h->drv[i].busy_configuring = 1; + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + return_code = deregister_disk(h->gendisk[i], + &h->drv[i], 1); + h->drv[i].busy_configuring = 0; } + } - /* Compare controller drive array to drivers drive array. - * Check for updates in the drive information and any new drives - * on the controller. - */ - for (i = 0; i < num_luns; i++) { - int j; + /* Compare controller drive array to driver's drive array. + * Check for updates in the drive information and any new drives + * on the controller due to ACU adding logical drives, or changing + * a logical drive's size, etc. Reregister any new/changed drives + */ + for (i = 0; i < num_luns; i++) { + int j; - drv_found = 0; + drv_found = 0; - lunid = (0xff & - (unsigned int)(ld_buff->LUN[i][3])) << 24; - lunid |= (0xff & - (unsigned int)(ld_buff->LUN[i][2])) << 16; - lunid |= (0xff & - (unsigned int)(ld_buff->LUN[i][1])) << 8; - lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]); + memcpy(&lunid, &ld_buff->LUN[i][0], 4); + lunid = le32_to_cpu(lunid); - /* Find if the LUN is already in the drive array - * of the controller. If so then update its info - * if not is use. If it does not exist then find - * the first free index and add it. - */ - for (j = 0; j <= h->highest_lun; j++) { - if (h->drv[j].LunID == lunid) { - drv_index = j; - drv_found = 1; - } + /* Find if the LUN is already in the drive array + * of the driver. If so then update its info + * if not in use. If it does not exist then find + * the first free index and add it. + */ + for (j = 0; j <= h->highest_lun; j++) { + if (h->drv[j].raid_level != -1 && + h->drv[j].LunID == lunid) { + drv_index = j; + drv_found = 1; + break; } + } - /* check if the drive was found already in the array */ - if (!drv_found) { - drv_index = cciss_find_free_drive_index(ctlr); - if (drv_index == -1) - goto freeret; - - /*Check if the gendisk needs to be allocated */ + /* check if the drive was found already in the array */ + if (!drv_found) { + drv_index = cciss_find_free_drive_index(ctlr); + if (drv_index == -1) + goto freeret; + /*Check if the gendisk needs to be allocated */ + if (!h->gendisk[drv_index]) { + h->gendisk[drv_index] = + alloc_disk(1 << NWD_SHIFT); if (!h->gendisk[drv_index]){ - h->gendisk[drv_index] = alloc_disk(1 << NWD_SHIFT); - if (!h->gendisk[drv_index]){ - printk(KERN_ERR "cciss: could not allocate new disk %d\n", drv_index); - goto mem_msg; - } + printk(KERN_ERR "cciss: could not " + "allocate new disk %d\n", + drv_index); + goto mem_msg; } } h->drv[drv_index].LunID = lunid; - cciss_update_drive_info(ctlr, drv_index); - } /* end for */ - } /* end else */ + + /* Don't need to mark this busy because nobody + * else knows about this disk yet to contend + * for access to it. + */ + h->drv[drv_index].busy_configuring = 0; + wmb(); + + } + cciss_update_drive_info(ctlr, drv_index); + } /* end for */ freeret: kfree(ld_buff); @@ -1597,6 +1685,7 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) return -1; mem_msg: printk(KERN_ERR "cciss: out of memory\n"); + h->busy_configuring = 0; goto freeret; } @@ -1652,15 +1741,15 @@ static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, * other than disk 0 we will call put_disk. We do not * do this for disk 0 as we need it to be able to * configure the controller. - */ + */ if (clear_all){ /* This isn't pretty, but we need to find the * disk in our array and NULL our the pointer. * This is so that we will call alloc_disk if * this index is used again later. - */ + */ for (i=0; i < CISS_MAX_LUN; i++){ - if(h->gendisk[i] == disk){ + if (h->gendisk[i] == disk) { h->gendisk[i] = NULL; break; } @@ -1688,7 +1777,7 @@ static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, if (drv == h->drv + h->highest_lun) { /* if so, find the new hightest lun */ int i, newhighest = -1; - for (i = 0; i < h->highest_lun; i++) { + for (i = 0; i <= h->highest_lun; i++) { /* if the disk has size > 0, it is available */ if (h->drv[i].heads) newhighest = i; @@ -3318,6 +3407,9 @@ geo_inq: cciss_geometry_inquiry(cntl_num, i, 0, total_size, block_size, inq_buff, &hba[cntl_num]->drv[i]); + cciss_get_serial_no(cntl_num, i, 0, + hba[cntl_num]->drv[i].serial_no, + sizeof(hba[cntl_num]->drv[i].serial_no)); } else { /* initialize raid_level to indicate a free space */ hba[cntl_num]->drv[i].raid_level = -1; diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h index b70988dd33ec..24a7efa993ab 100644 --- a/drivers/block/cciss.h +++ b/drivers/block/cciss.h @@ -39,6 +39,8 @@ typedef struct _drive_info_struct *to prevent it from being opened or it's queue *from being started. */ + __u8 serial_no[16]; /* from inquiry page 0x83, */ + /* not necc. null terminated. */ } drive_info_struct; #ifdef CONFIG_CISS_SCSI_TAPE -- cgit v1.2.3 From 6ae5ce8e8d4de666f31286808d2285aa6a50fa40 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Mon, 4 Aug 2008 11:54:52 +0200 Subject: cciss: remove redundant code This patch removes redundant code where ever logical volumes are added or removed. It adds 3 new functions that are called instead of having the same code spread throughout the driver. It also removes the cciss_getgeometry function. The patch is fairly complex but we haven't figured out how to make it any simpler and still do everything that needs to be done. Some of the complexity comes from having to special case booting from cciss. Otherwise the gendisk doesn't get added in time and the switchroot will fail. Signed-off-by: Stephen M. Cameron Signed-off-by: Mike Miller Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 473 ++++++++++++++++++-------------------------------- 1 file changed, 169 insertions(+), 304 deletions(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index f9f10a15d253..08255644e80a 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -159,7 +159,7 @@ static int cciss_ioctl(struct inode *inode, struct file *filep, static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo); static int cciss_revalidate(struct gendisk *disk); -static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk); +static int rebuild_lun_table(ctlr_info_t *h, int first_time); static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, int clear_all); @@ -171,7 +171,6 @@ static void cciss_geometry_inquiry(int ctlr, int logvol, int withirq, sector_t total_size, unsigned int block_size, InquiryData_struct *inq_buff, drive_info_struct *drv); -static void cciss_getgeometry(int cntl_num); static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *, __u32); static void start_io(ctlr_info_t *h); @@ -929,8 +928,10 @@ static int cciss_ioctl(struct inode *inode, struct file *filep, return 0; } + case CCISS_DEREGDISK: + case CCISS_REGNEWD: case CCISS_REVALIDVOLS: - return rebuild_lun_table(host, NULL); + return rebuild_lun_table(host, 0); case CCISS_GETLUNINFO:{ LogvolInfo_struct luninfo; @@ -943,12 +944,6 @@ static int cciss_ioctl(struct inode *inode, struct file *filep, return -EFAULT; return 0; } - case CCISS_DEREGDISK: - return rebuild_lun_table(host, disk); - - case CCISS_REGNEWD: - return rebuild_lun_table(host, NULL); - case CCISS_PASSTHRU: { IOCTL_Command_struct iocommand; @@ -1361,6 +1356,42 @@ static void cciss_get_serial_no(int ctlr, int logvol, int withirq, return; } +static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk, + int drv_index) +{ + disk->queue = blk_init_queue(do_cciss_request, &h->lock); + sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index); + disk->major = h->major; + disk->first_minor = drv_index << NWD_SHIFT; + disk->fops = &cciss_fops; + disk->private_data = &h->drv[drv_index]; + + /* Set up queue information */ + blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask); + + /* This is a hardware imposed limit. */ + blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES); + + /* This is a limit in the driver and could be eliminated. */ + blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES); + + blk_queue_max_sectors(disk->queue, h->cciss_max_sectors); + + blk_queue_softirq_done(disk->queue, cciss_softirq_done); + + disk->queue->queuedata = h; + + blk_queue_hardsect_size(disk->queue, + h->drv[drv_index].block_size); + + /* Make sure all queue data is written out before */ + /* setting h->drv[drv_index].queue, as setting this */ + /* allows the interrupt handler to start the queue */ + wmb(); + h->drv[drv_index].queue = disk->queue; + add_disk(disk); +} + /* This function will check the usage_count of the drive to be updated/added. * If the usage_count is zero and it is a heretofore unknown drive, or, * the drive's capacity, geometry, or serial number has changed, @@ -1371,7 +1402,7 @@ static void cciss_get_serial_no(int ctlr, int logvol, int withirq, * is also the controller node. Any changes to disk 0 will show up on * the next reboot. */ -static void cciss_update_drive_info(int ctlr, int drv_index) +static void cciss_update_drive_info(int ctlr, int drv_index, int first_time) { ctlr_info_t *h = hba[ctlr]; struct gendisk *disk; @@ -1381,6 +1412,7 @@ static void cciss_update_drive_info(int ctlr, int drv_index) unsigned long flags = 0; int ret = 0; drive_info_struct *drvinfo; + int was_only_controller_node; /* Get information about the disk and modify the driver structure */ inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); @@ -1388,6 +1420,13 @@ static void cciss_update_drive_info(int ctlr, int drv_index) if (inq_buff == NULL || drvinfo == NULL) goto mem_msg; + /* See if we're trying to update the "controller node" + * this will happen the when the first logical drive gets + * created by ACU. + */ + was_only_controller_node = (drv_index == 0 && + h->drv[0].raid_level == -1); + /* testing to see if 16-byte CDBs are already being used */ if (h->cciss_read == CCISS_READ_16) { cciss_read_capacity_16(h->ctlr, drv_index, 1, @@ -1427,25 +1466,26 @@ static void cciss_update_drive_info(int ctlr, int drv_index) drvinfo->nr_blocks == h->drv[drv_index].nr_blocks && drvinfo->heads == h->drv[drv_index].heads && drvinfo->sectors == h->drv[drv_index].sectors && - drvinfo->cylinders == h->drv[drv_index].cylinders)) { + drvinfo->cylinders == h->drv[drv_index].cylinders)) /* The disk is unchanged, nothing to update */ goto freeret; - } - /* Not the same disk, or something's changed, so we need to */ - /* deregister it, and re-register it, if it's not in use. */ - - /* if the disk already exists then deregister it before proceeding */ - /* (unless it's the first disk (for the controller node). */ + /* If we get here it's not the same disk, or something's changed, + * so we need to * deregister it, and re-register it, if it's not + * in use. + * If the disk already exists then deregister it before proceeding + * (unless it's the first disk (for the controller node). + */ if (h->drv[drv_index].raid_level != -1 && drv_index != 0) { printk(KERN_WARNING "disk %d has changed.\n", drv_index); spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); h->drv[drv_index].busy_configuring = 1; spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - /* deregister_disk sets h->drv[drv_index].queue = NULL */ - /* which keeps the interrupt handler from starting */ - /* the queue. */ + /* deregister_disk sets h->drv[drv_index].queue = NULL + * which keeps the interrupt handler from starting + * the queue. + */ ret = deregister_disk(h->gendisk[drv_index], &h->drv[drv_index], 0); h->drv[drv_index].busy_configuring = 0; @@ -1455,8 +1495,9 @@ static void cciss_update_drive_info(int ctlr, int drv_index) if (ret) goto freeret; - /* Save the new information from cciss_geometry_inquiry */ - /* and serial number inquiry. */ + /* Save the new information from cciss_geometry_inquiry + * and serial number inquiry. + */ h->drv[drv_index].block_size = drvinfo->block_size; h->drv[drv_index].nr_blocks = drvinfo->nr_blocks; h->drv[drv_index].heads = drvinfo->heads; @@ -1469,46 +1510,20 @@ static void cciss_update_drive_info(int ctlr, int drv_index) disk = h->gendisk[drv_index]; set_capacity(disk, h->drv[drv_index].nr_blocks); - /* if it's the controller (if drv_index == 0) it's already added */ - if (drv_index) { - disk->queue = blk_init_queue(do_cciss_request, &h->lock); - sprintf(disk->disk_name, "cciss/c%dd%d", ctlr, drv_index); - disk->major = h->major; - disk->first_minor = drv_index << NWD_SHIFT; - disk->fops = &cciss_fops; - disk->private_data = &h->drv[drv_index]; - - /* Set up queue information */ - blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask); - - /* This is a hardware imposed limit. */ - blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES); - - /* This is a limit in the driver and could be eliminated. */ - blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES); - - blk_queue_max_sectors(disk->queue, h->cciss_max_sectors); - - blk_queue_softirq_done(disk->queue, cciss_softirq_done); - - disk->queue->queuedata = hba[ctlr]; - - blk_queue_hardsect_size(disk->queue, - hba[ctlr]->drv[drv_index].block_size); - - /* Make sure all queue data is written out before */ - /* setting h->drv[drv_index].queue, as setting this */ - /* allows the interrupt handler to start the queue */ - wmb(); - h->drv[drv_index].queue = disk->queue; - add_disk(disk); - } + /* If it's not disk 0 (drv_index != 0) + * or if it was disk 0, but there was previously + * no actual corresponding configured logical drive + * (raid_leve == -1) then we want to update the + * logical drive's information. + */ + if (drv_index || first_time) + cciss_add_disk(h, disk, drv_index); - freeret: +freeret: kfree(inq_buff); kfree(drvinfo); return; - mem_msg: +mem_msg: printk(KERN_ERR "cciss: out of memory\n"); goto freeret; } @@ -1533,6 +1548,73 @@ static int cciss_find_free_drive_index(int ctlr) return -1; } +/* cciss_add_gendisk finds a free hba[]->drv structure + * and allocates a gendisk if needed, and sets the lunid + * in the drvinfo structure. It returns the index into + * the ->drv[] array, or -1 if none are free. + * is_controller_node indicates whether highest_lun should + * count this disk, or if it's only being added to provide + * a means to talk to the controller in case no logical + * drives have yet been configured. + */ +static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid) +{ + int drv_index; + + drv_index = cciss_find_free_drive_index(h->ctlr); + if (drv_index == -1) + return -1; + /*Check if the gendisk needs to be allocated */ + if (!h->gendisk[drv_index]) { + h->gendisk[drv_index] = + alloc_disk(1 << NWD_SHIFT); + if (!h->gendisk[drv_index]) { + printk(KERN_ERR "cciss%d: could not " + "allocate a new disk %d\n", + h->ctlr, drv_index); + return -1; + } + } + h->drv[drv_index].LunID = lunid; + + /* Don't need to mark this busy because nobody */ + /* else knows about this disk yet to contend */ + /* for access to it. */ + h->drv[drv_index].busy_configuring = 0; + wmb(); + return drv_index; +} + +/* This is for the special case of a controller which + * has no logical drives. In this case, we still need + * to register a disk so the controller can be accessed + * by the Array Config Utility. + */ +static void cciss_add_controller_node(ctlr_info_t *h) +{ + struct gendisk *disk; + int drv_index; + + if (h->gendisk[0] != NULL) /* already did this? Then bail. */ + return; + + drv_index = cciss_add_gendisk(h, 0); + if (drv_index == -1) { + printk(KERN_WARNING "cciss%d: could not " + "add disk 0.\n", h->ctlr); + return; + } + h->drv[drv_index].block_size = 512; + h->drv[drv_index].nr_blocks = 0; + h->drv[drv_index].heads = 0; + h->drv[drv_index].sectors = 0; + h->drv[drv_index].cylinders = 0; + h->drv[drv_index].raid_level = -1; + memset(h->drv[drv_index].serial_no, 0, 16); + disk = h->gendisk[drv_index]; + cciss_add_disk(h, disk, drv_index); +} + /* This function will add and remove logical drives from the Logical * drive array of the controller and maintain persistency of ordering * so that mount points are preserved until the next reboot. This allows @@ -1540,10 +1622,8 @@ static int cciss_find_free_drive_index(int ctlr) * without a re-ordering of those drives. * INPUT * h = The controller to perform the operations on - * del_disk = The disk to remove if specified. If the value given - * is NULL then no disk is removed. */ -static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) +static int rebuild_lun_table(ctlr_info_t *h, int first_time) { int ctlr = h->ctlr; int num_luns; @@ -1556,6 +1636,9 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) __u32 lunid = 0; unsigned long flags; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + /* Set busy_configuring flag for this operation */ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); if (h->busy_configuring) { @@ -1565,9 +1648,6 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) h->busy_configuring = 1; spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL); if (ld_buff == NULL) goto mem_msg; @@ -1593,10 +1673,14 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) " this driver.\n"); } - /* Compare controller drive array to driver's drive array */ - /* to see if any drives are missing on the controller due */ - /* to action of Array Config Utility (user deletes drive) */ - /* and deregister logical drives which have disappeared. */ + if (num_luns == 0) + cciss_add_controller_node(h); + + /* Compare controller drive array to driver's drive array + * to see if any drives are missing on the controller due + * to action of Array Config Utility (user deletes drive) + * and deregister logical drives which have disappeared. + */ for (i = 0; i <= h->highest_lun; i++) { int j; drv_found = 0; @@ -1648,34 +1732,14 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) /* check if the drive was found already in the array */ if (!drv_found) { - drv_index = cciss_find_free_drive_index(ctlr); + drv_index = cciss_add_gendisk(h, lunid); if (drv_index == -1) goto freeret; - /*Check if the gendisk needs to be allocated */ - if (!h->gendisk[drv_index]) { - h->gendisk[drv_index] = - alloc_disk(1 << NWD_SHIFT); - if (!h->gendisk[drv_index]){ - printk(KERN_ERR "cciss: could not " - "allocate new disk %d\n", - drv_index); - goto mem_msg; - } - } - h->drv[drv_index].LunID = lunid; - - /* Don't need to mark this busy because nobody - * else knows about this disk yet to contend - * for access to it. - */ - h->drv[drv_index].busy_configuring = 0; - wmb(); - } - cciss_update_drive_info(ctlr, drv_index); + cciss_update_drive_info(ctlr, drv_index, first_time); } /* end for */ - freeret: +freeret: kfree(ld_buff); h->busy_configuring = 0; /* We return -1 here to tell the ACU that we have registered/updated @@ -1683,7 +1747,7 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) * additional times. */ return -1; - mem_msg: +mem_msg: printk(KERN_ERR "cciss: out of memory\n"); h->busy_configuring = 0; goto freeret; @@ -3288,139 +3352,9 @@ err_out_free_res: return err; } -/* - * Gets information about the local volumes attached to the controller. +/* Function to find the first free pointer into our hba[] array + * Returns -1 if no free entries are left. */ -static void cciss_getgeometry(int cntl_num) -{ - ReportLunData_struct *ld_buff; - InquiryData_struct *inq_buff; - int return_code; - int i; - int listlength = 0; - __u32 lunid = 0; - unsigned block_size; - sector_t total_size; - - ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL); - if (ld_buff == NULL) { - printk(KERN_ERR "cciss: out of memory\n"); - return; - } - inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); - if (inq_buff == NULL) { - printk(KERN_ERR "cciss: out of memory\n"); - kfree(ld_buff); - return; - } - /* Get the firmware version */ - return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff, - sizeof(InquiryData_struct), 0, 0, 0, NULL, - TYPE_CMD); - if (return_code == IO_OK) { - hba[cntl_num]->firm_ver[0] = inq_buff->data_byte[32]; - hba[cntl_num]->firm_ver[1] = inq_buff->data_byte[33]; - hba[cntl_num]->firm_ver[2] = inq_buff->data_byte[34]; - hba[cntl_num]->firm_ver[3] = inq_buff->data_byte[35]; - } else { /* send command failed */ - - printk(KERN_WARNING "cciss: unable to determine firmware" - " version of controller\n"); - } - /* Get the number of logical volumes */ - return_code = sendcmd(CISS_REPORT_LOG, cntl_num, ld_buff, - sizeof(ReportLunData_struct), 0, 0, 0, NULL, - TYPE_CMD); - - if (return_code == IO_OK) { -#ifdef CCISS_DEBUG - printk("LUN Data\n--------------------------\n"); -#endif /* CCISS_DEBUG */ - - listlength |= - (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24; - listlength |= - (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16; - listlength |= - (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8; - listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]); - } else { /* reading number of logical volumes failed */ - - printk(KERN_WARNING "cciss: report logical volume" - " command failed\n"); - listlength = 0; - } - hba[cntl_num]->num_luns = listlength / 8; // 8 bytes pre entry - if (hba[cntl_num]->num_luns > CISS_MAX_LUN) { - printk(KERN_ERR - "ciss: only %d number of logical volumes supported\n", - CISS_MAX_LUN); - hba[cntl_num]->num_luns = CISS_MAX_LUN; - } -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "Length = %x %x %x %x = %d\n", - ld_buff->LUNListLength[0], ld_buff->LUNListLength[1], - ld_buff->LUNListLength[2], ld_buff->LUNListLength[3], - hba[cntl_num]->num_luns); -#endif /* CCISS_DEBUG */ - - hba[cntl_num]->highest_lun = hba[cntl_num]->num_luns - 1; - for (i = 0; i < CISS_MAX_LUN; i++) { - if (i < hba[cntl_num]->num_luns) { - lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3])) - << 24; - lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2])) - << 16; - lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1])) - << 8; - lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]); - - hba[cntl_num]->drv[i].LunID = lunid; - -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "LUN[%d]: %x %x %x %x = %x\n", i, - ld_buff->LUN[i][0], ld_buff->LUN[i][1], - ld_buff->LUN[i][2], ld_buff->LUN[i][3], - hba[cntl_num]->drv[i].LunID); -#endif /* CCISS_DEBUG */ - - /* testing to see if 16-byte CDBs are already being used */ - if(hba[cntl_num]->cciss_read == CCISS_READ_16) { - cciss_read_capacity_16(cntl_num, i, 0, - &total_size, &block_size); - goto geo_inq; - } - cciss_read_capacity(cntl_num, i, 0, &total_size, &block_size); - - /* If read_capacity returns all F's the logical is >2TB */ - /* so we switch to 16-byte CDBs for all read/write ops */ - if(total_size == 0xFFFFFFFFULL) { - cciss_read_capacity_16(cntl_num, i, 0, - &total_size, &block_size); - hba[cntl_num]->cciss_read = CCISS_READ_16; - hba[cntl_num]->cciss_write = CCISS_WRITE_16; - } else { - hba[cntl_num]->cciss_read = CCISS_READ_10; - hba[cntl_num]->cciss_write = CCISS_WRITE_10; - } -geo_inq: - cciss_geometry_inquiry(cntl_num, i, 0, total_size, - block_size, inq_buff, - &hba[cntl_num]->drv[i]); - cciss_get_serial_no(cntl_num, i, 0, - hba[cntl_num]->drv[i].serial_no, - sizeof(hba[cntl_num]->drv[i].serial_no)); - } else { - /* initialize raid_level to indicate a free space */ - hba[cntl_num]->drv[i].raid_level = -1; - } - } - kfree(ld_buff); - kfree(inq_buff); -} - -/* Function to find the first free pointer into our hba[] array */ -/* Returns -1 if no free entries are left. */ static int alloc_cciss_hba(void) { int i; @@ -3432,11 +3366,6 @@ static int alloc_cciss_hba(void) p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL); if (!p) goto Enomem; - p->gendisk[0] = alloc_disk(1 << NWD_SHIFT); - if (!p->gendisk[0]) { - kfree(p); - goto Enomem; - } hba[i] = p; return i; } @@ -3564,11 +3493,13 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, ((hba[i]->nr_cmds + BITS_PER_LONG - 1) / BITS_PER_LONG) * sizeof(unsigned long)); -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "Scanning for drives on controller cciss%d\n", i); -#endif /* CCISS_DEBUG */ - - cciss_getgeometry(i); + hba[i]->num_luns = 0; + hba[i]->highest_lun = -1; + for (j = 0; j < CISS_MAX_LUN; j++) { + hba[i]->drv[j].raid_level = -1; + hba[i]->drv[j].queue = NULL; + hba[i]->gendisk[j] = NULL; + } cciss_scsi_setup(i); @@ -3581,76 +3512,10 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, hba[i]->busy_initializing = 0; - do { - drive_info_struct *drv = &(hba[i]->drv[j]); - struct gendisk *disk = hba[i]->gendisk[j]; - struct request_queue *q; - - /* Check if the disk was allocated already */ - if (!disk){ - hba[i]->gendisk[j] = alloc_disk(1 << NWD_SHIFT); - disk = hba[i]->gendisk[j]; - } - - /* Check that the disk was able to be allocated */ - if (!disk) { - printk(KERN_ERR "cciss: unable to allocate memory for disk %d\n", j); - goto clean4; - } - - q = blk_init_queue(do_cciss_request, &hba[i]->lock); - if (!q) { - printk(KERN_ERR - "cciss: unable to allocate queue for disk %d\n", - j); - goto clean4; - } - drv->queue = q; - - blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask); - - /* This is a hardware imposed limit. */ - blk_queue_max_hw_segments(q, MAXSGENTRIES); - - /* This is a limit in the driver and could be eliminated. */ - blk_queue_max_phys_segments(q, MAXSGENTRIES); - - blk_queue_max_sectors(q, hba[i]->cciss_max_sectors); - - blk_queue_softirq_done(q, cciss_softirq_done); - - q->queuedata = hba[i]; - sprintf(disk->disk_name, "cciss/c%dd%d", i, j); - disk->major = hba[i]->major; - disk->first_minor = j << NWD_SHIFT; - disk->fops = &cciss_fops; - disk->queue = q; - disk->private_data = drv; - disk->driverfs_dev = &pdev->dev; - /* we must register the controller even if no disks exist */ - /* this is for the online array utilities */ - if (!drv->heads && j) - continue; - blk_queue_hardsect_size(q, drv->block_size); - set_capacity(disk, drv->nr_blocks); - j++; - } while (j <= hba[i]->highest_lun); - - /* Make sure all queue data is written out before */ - /* interrupt handler, triggered by add_disk, */ - /* is allowed to start them. */ - wmb(); - - for (j = 0; j <= hba[i]->highest_lun; j++) - add_disk(hba[i]->gendisk[j]); - - /* we must register the controller even if no disks exist */ - if (hba[i]->highest_lun == -1) - add_disk(hba[i]->gendisk[0]); - + rebuild_lun_table(hba[i], 1); return 1; - clean4: +clean4: #ifdef CONFIG_CISS_SCSI_TAPE kfree(hba[i]->scsi_rejects.complete); #endif @@ -3665,9 +3530,9 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle); free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]); - clean2: +clean2: unregister_blkdev(hba[i]->major, hba[i]->devname); - clean1: +clean1: hba[i]->busy_initializing = 0; /* cleanup any queues that may have been initialized */ for (j=0; j <= hba[i]->highest_lun; j++){ -- cgit v1.2.3 From eece695f8bf9d1aacf3a119ab8e21db31948e40b Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Mon, 4 Aug 2008 11:54:53 +0200 Subject: cciss: fix negative logical drive count in procfs This patch fixes a problem where the logical volume count may go negative. In some instances if several logical are configured on a controller and all of them are deleted using the online utilities the volume count in /proc may go negative with no way get it correct again. Signed-off-by: Stephen M. Cameron Signed-off-by: Mike Miller Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 08255644e80a..9ffa821fbfd7 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1533,15 +1533,18 @@ mem_msg: * where new drives will be added. If the index to be returned is greater * than the highest_lun index for the controller then highest_lun is set * to this new index. If there are no available indexes then -1 is returned. + * "controller_node" is used to know if this is a real logical drive, or just + * the controller node, which determines if this counts towards highest_lun. */ -static int cciss_find_free_drive_index(int ctlr) +static int cciss_find_free_drive_index(int ctlr, int controller_node) { int i; for (i = 0; i < CISS_MAX_LUN; i++) { if (hba[ctlr]->drv[i].raid_level == -1) { if (i > hba[ctlr]->highest_lun) - hba[ctlr]->highest_lun = i; + if (!controller_node) + hba[ctlr]->highest_lun = i; return i; } } @@ -1557,11 +1560,11 @@ static int cciss_find_free_drive_index(int ctlr) * a means to talk to the controller in case no logical * drives have yet been configured. */ -static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid) +static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node) { int drv_index; - drv_index = cciss_find_free_drive_index(h->ctlr); + drv_index = cciss_find_free_drive_index(h->ctlr, controller_node); if (drv_index == -1) return -1; /*Check if the gendisk needs to be allocated */ @@ -1598,7 +1601,7 @@ static void cciss_add_controller_node(ctlr_info_t *h) if (h->gendisk[0] != NULL) /* already did this? Then bail. */ return; - drv_index = cciss_add_gendisk(h, 0); + drv_index = cciss_add_gendisk(h, 0, 1); if (drv_index == -1) { printk(KERN_WARNING "cciss%d: could not " "add disk 0.\n", h->ctlr); @@ -1732,7 +1735,7 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time) /* check if the drive was found already in the array */ if (!drv_found) { - drv_index = cciss_add_gendisk(h, lunid); + drv_index = cciss_add_gendisk(h, lunid, 0); if (drv_index == -1) goto freeret; } -- cgit v1.2.3 From f4a93bcda74edfe6977dcf296ed8c86119638871 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Mon, 4 Aug 2008 11:54:53 +0200 Subject: cciss: change the way we notify scsi midlayer of tape drives This patch changes way we notify the scsi layer that something has changed on the SCSI tape side of the driver. The user can now just tell the driver to rescan a particular controller rather than having to know the SCSI nexus to echo into the SCSI mid-layer. Signed-off-by: Stephen M. Cameron Signed-off-by: Mike Miller Signed-off-by: Jens Axboe --- Documentation/cciss.txt | 21 ++---- drivers/block/cciss_scsi.c | 157 ++++++++++++++++++++++++++++++++++----------- 2 files changed, 124 insertions(+), 54 deletions(-) diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt index 63e59b8847c5..8244c6442faa 100644 --- a/Documentation/cciss.txt +++ b/Documentation/cciss.txt @@ -112,27 +112,18 @@ Hot plug support for SCSI tape drives Hot plugging of SCSI tape drives is supported, with some caveats. The cciss driver must be informed that changes to the SCSI bus -have been made, in addition to and prior to informing the SCSI -mid layer. This may be done via the /proc filesystem. For example: +have been made. This may be done via the /proc filesystem. +For example: echo "rescan" > /proc/scsi/cciss0/1 -This causes the adapter to query the adapter about changes to the -physical SCSI buses and/or fibre channel arbitrated loop and the +This causes the driver to query the adapter about changes to the +physical SCSI buses and/or fibre channel arbitrated loop and the driver to make note of any new or removed sequential access devices or medium changers. The driver will output messages indicating what devices have been added or removed and the controller, bus, target and -lun used to address the device. Once this is done, the SCSI mid layer -can be informed of changes to the virtual SCSI bus which the driver -presents to it in the usual way. For example: - - echo scsi add-single-device 3 2 1 0 > /proc/scsi/scsi - -to add a device on controller 3, bus 2, target 1, lun 0. Note that -the driver makes an effort to preserve the devices positions -in the virtual SCSI bus, so if you are only moving tape drives -around on the same adapter and not adding or removing tape drives -from the adapter, informing the SCSI mid layer may not be necessary. +lun used to address the device. It then notifies the SCSI mid layer +of these changes. Note that the naming convention of the /proc filesystem entries contains a number in addition to the driver name. (E.g. "cciss0" diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index e4bf9a11ca0d..c673ff14126a 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -358,10 +358,15 @@ find_bus_target_lun(int ctlr, int *bus, int *target, int *lun) } return (!found); } +struct scsi2map { + char scsi3addr[8]; + int bus, target, lun; +}; static int cciss_scsi_add_entry(int ctlr, int hostno, - unsigned char *scsi3addr, int devtype) + unsigned char *scsi3addr, int devtype, + struct scsi2map *added, int *nadded) { /* assumes hba[ctlr]->scsi_ctlr->lock is held */ int n = ccissscsi[ctlr].ndevices; @@ -375,6 +380,12 @@ cciss_scsi_add_entry(int ctlr, int hostno, sd = &ccissscsi[ctlr].dev[n]; if (find_bus_target_lun(ctlr, &sd->bus, &sd->target, &sd->lun) != 0) return -1; + + added[*nadded].bus = sd->bus; + added[*nadded].target = sd->target; + added[*nadded].lun = sd->lun; + (*nadded)++; + memcpy(&sd->scsi3addr[0], scsi3addr, 8); sd->devtype = devtype; ccissscsi[ctlr].ndevices++; @@ -390,7 +401,8 @@ cciss_scsi_add_entry(int ctlr, int hostno, } static void -cciss_scsi_remove_entry(int ctlr, int hostno, int entry) +cciss_scsi_remove_entry(int ctlr, int hostno, int entry, + struct scsi2map *removed, int *nremoved) { /* assumes hba[ctlr]->scsi_ctlr->lock is held */ int i; @@ -398,6 +410,10 @@ cciss_scsi_remove_entry(int ctlr, int hostno, int entry) if (entry < 0 || entry >= CCISS_MAX_SCSI_DEVS_PER_HBA) return; sd = ccissscsi[ctlr].dev[entry]; + removed[*nremoved].bus = sd.bus; + removed[*nremoved].target = sd.target; + removed[*nremoved].lun = sd.lun; + (*nremoved)++; for (i=entry;iscsi_ctlr)->scsi_host; + /* find any devices in ccissscsi[] that are not in sd[] and remove them from ccissscsi[] */ i = 0; + nremoved = 0; + nadded = 0; while(idevtype), hostno, csd->bus, csd->target, csd->lun); */ - cciss_scsi_remove_entry(ctlr, hostno, i); - /* note, i not incremented */ + cciss_scsi_remove_entry(ctlr, hostno, i, + removed, &nremoved); + /* remove ^^^, hence i not incremented */ } else if (found == 1) { /* device is different kind */ changes++; @@ -464,8 +521,15 @@ adjust_cciss_scsi_table(int ctlr, int hostno, "(device type now %s).\n", ctlr, hostno, csd->bus, csd->target, csd->lun, scsi_device_type(csd->devtype)); + cciss_scsi_remove_entry(ctlr, hostno, i, + removed, &nremoved); + /* remove ^^^, hence i not incremented */ + if (cciss_scsi_add_entry(ctlr, hostno, + &sd[j].scsi3addr[0], sd[j].devtype, + added, &nadded) != 0) + /* we just removed one, so add can't fail. */ + BUG(); csd->devtype = sd[j].devtype; - i++; /* so just move along. */ } else /* device is same as it ever was, */ i++; /* so just move along. */ } @@ -489,7 +553,9 @@ adjust_cciss_scsi_table(int ctlr, int hostno, if (!found) { changes++; if (cciss_scsi_add_entry(ctlr, hostno, - &sd[i].scsi3addr[0], sd[i].devtype) != 0) + + &sd[i].scsi3addr[0], sd[i].devtype, + added, &nadded) != 0) break; } else if (found == 1) { /* should never happen... */ @@ -501,9 +567,50 @@ adjust_cciss_scsi_table(int ctlr, int hostno, } CPQ_TAPE_UNLOCK(ctlr, flags); - if (!changes) - printk("cciss%d: No device changes detected.\n", ctlr); + /* Don't notify scsi mid layer of any changes the first time through */ + /* (or if there are no changes) scsi_scan_host will do it later the */ + /* first time through. */ + if (hostno == -1 || !changes) + goto free_and_out; + + /* Notify scsi mid layer of any removed devices */ + for (i = 0; i < nremoved; i++) { + struct scsi_device *sdev = + scsi_device_lookup(sh, removed[i].bus, + removed[i].target, removed[i].lun); + if (sdev != NULL) { + scsi_remove_device(sdev); + scsi_device_put(sdev); + } else { + /* We don't expect to get here. */ + /* future cmds to this device will get selection */ + /* timeout as if the device was gone. */ + printk(KERN_WARNING "cciss%d: didn't find " + "c%db%dt%dl%d\n for removal.", + ctlr, hostno, removed[i].bus, + removed[i].target, removed[i].lun); + } + } + + /* Notify scsi mid layer of any added devices */ + for (i = 0; i < nadded; i++) { + int rc; + rc = scsi_add_device(sh, added[i].bus, + added[i].target, added[i].lun); + if (rc == 0) + continue; + printk(KERN_WARNING "cciss%d: scsi_add_device " + "c%db%dt%dl%d failed, device not added.\n", + ctlr, hostno, + added[i].bus, added[i].target, added[i].lun); + /* now we have to remove it from ccissscsi, */ + /* since it didn't get added to scsi mid layer */ + fixup_botched_add(ctlr, added[i].scsi3addr); + } +free_and_out: + kfree(added); + kfree(removed); return 0; } @@ -1354,32 +1461,6 @@ cciss_unregister_scsi(int ctlr) kfree(sa); } -static int -cciss_register_scsi(int ctlr) -{ - unsigned long flags; - - CPQ_TAPE_LOCK(ctlr, flags); - - /* Since this is really a block driver, the SCSI core may not be - initialized at init time, in which case, calling scsi_register_host - would hang. Instead, we do it later, via /proc filesystem - and rc scripts, when we know SCSI core is good to go. */ - - /* Only register if SCSI devices are detected. */ - if (ccissscsi[ctlr].ndevices != 0) { - ((struct cciss_scsi_adapter_data_t *) - hba[ctlr]->scsi_ctlr)->registered = 1; - CPQ_TAPE_UNLOCK(ctlr, flags); - return cciss_scsi_detect(ctlr); - } - CPQ_TAPE_UNLOCK(ctlr, flags); - printk(KERN_INFO - "cciss%d: No appropriate SCSI device detected, " - "SCSI subsystem not engaged.\n", ctlr); - return 0; -} - static int cciss_engage_scsi(int ctlr) { @@ -1391,15 +1472,15 @@ cciss_engage_scsi(int ctlr) sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr; stk = &sa->cmd_stack; - if (((struct cciss_scsi_adapter_data_t *) - hba[ctlr]->scsi_ctlr)->registered) { + if (sa->registered) { printk("cciss%d: SCSI subsystem already engaged.\n", ctlr); spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); return ENXIO; } + sa->registered = 1; spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); cciss_update_non_disk_devices(ctlr, -1); - cciss_register_scsi(ctlr); + cciss_scsi_detect(ctlr); return 0; } @@ -1493,7 +1574,5 @@ static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd) /* If no tape support, then these become defined out of existence */ #define cciss_scsi_setup(cntl_num) -#define cciss_unregister_scsi(ctlr) -#define cciss_register_scsi(ctlr) #endif /* CONFIG_CISS_SCSI_TAPE */ -- cgit v1.2.3 From 935dc8d7575e6c1292b057e39045a40f1fbe26e7 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Mon, 4 Aug 2008 11:54:54 +0200 Subject: cciss: add support for multi lun tape devices This patch adds support for multi-lun devices in a SAS environment. It's required for the support of media changers. Signed-off-by: Stephen M. Cameron Signed-off-by: Mike Miller Signed-off-by: Jens Axboe --- drivers/block/cciss_scsi.c | 40 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 37 insertions(+), 3 deletions(-) diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index c673ff14126a..e1233aabda77 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -371,16 +371,50 @@ cciss_scsi_add_entry(int ctlr, int hostno, /* assumes hba[ctlr]->scsi_ctlr->lock is held */ int n = ccissscsi[ctlr].ndevices; struct cciss_scsi_dev_t *sd; + int i, bus, target, lun; + unsigned char addr1[8], addr2[8]; if (n >= CCISS_MAX_SCSI_DEVS_PER_HBA) { printk("cciss%d: Too many devices, " "some will be inaccessible.\n", ctlr); return -1; } - sd = &ccissscsi[ctlr].dev[n]; - if (find_bus_target_lun(ctlr, &sd->bus, &sd->target, &sd->lun) != 0) - return -1; + bus = target = -1; + lun = 0; + /* Is this device a non-zero lun of a multi-lun device */ + /* byte 4 of the 8-byte LUN addr will contain the logical unit no. */ + if (scsi3addr[4] != 0) { + /* Search through our list and find the device which */ + /* has the same 8 byte LUN address, excepting byte 4. */ + /* Assign the same bus and target for this new LUN. */ + /* Use the logical unit number from the firmware. */ + memcpy(addr1, scsi3addr, 8); + addr1[4] = 0; + for (i = 0; i < n; i++) { + sd = &ccissscsi[ctlr].dev[i]; + memcpy(addr2, sd->scsi3addr, 8); + addr2[4] = 0; + /* differ only in byte 4? */ + if (memcmp(addr1, addr2, 8) == 0) { + bus = sd->bus; + target = sd->target; + lun = scsi3addr[4]; + break; + } + } + } + + sd = &ccissscsi[ctlr].dev[n]; + if (lun == 0) { + if (find_bus_target_lun(ctlr, + &sd->bus, &sd->target, &sd->lun) != 0) + return -1; + } else { + sd->bus = bus; + sd->target = target; + sd->lun = lun; + } added[*nadded].bus = sd->bus; added[*nadded].target = sd->target; added[*nadded].lun = sd->lun; -- cgit v1.2.3 From ba198efb5ef4e5f4927a18ff95a58f40c58cbaa9 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Mon, 4 Aug 2008 11:54:55 +0200 Subject: cciss: fix bug if scsi tape support is disabled Bug fix. If SCSI tape support is turned off we get an implicit declaration of cciss_unregister_scsi error in cciss_remove_one. Signed-off-by: Mike Miller Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 9ffa821fbfd7..b73116ef9236 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -3614,7 +3614,9 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev) } } +#ifdef CONFIG_CISS_SCSI_TAPE cciss_unregister_scsi(i); /* unhook from SCSI subsystem */ +#endif cciss_shutdown(pdev); -- cgit v1.2.3 From 1ac0ae062cecd37587f5b951089f90e1d9d91769 Mon Sep 17 00:00:00 2001 From: Denis ChengRq Date: Mon, 4 Aug 2008 11:56:30 +0200 Subject: bio: make use of bvec_nr_vecs Since introduced in 7ba1ba12eee, it should be made use of. Signed-off-by: Denis ChengRq Signed-off-by: Jens Axboe --- fs/bio.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index 25f1af0d81e5..8000e2fa16cb 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -77,11 +77,8 @@ struct bio_vec *bvec_alloc_bs(gfp_t gfp_mask, int nr, unsigned long *idx, struct */ bvl = mempool_alloc(bs->bvec_pools[*idx], gfp_mask); - if (bvl) { - struct biovec_slab *bp = bvec_slabs + *idx; - - memset(bvl, 0, bp->nr_vecs * sizeof(struct bio_vec)); - } + if (bvl) + memset(bvl, 0, bvec_nr_vecs(*idx) * sizeof(struct bio_vec)); return bvl; } @@ -149,7 +146,7 @@ struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs) goto out; } bio->bi_flags |= idx << BIO_POOL_OFFSET; - bio->bi_max_vecs = bvec_slabs[idx].nr_vecs; + bio->bi_max_vecs = bvec_nr_vecs(idx); } bio->bi_io_vec = bvl; } -- cgit v1.2.3 From 62aa0054da220b8bbe6f23c0eb1d97a99005d0b3 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 4 Aug 2008 11:59:05 +0200 Subject: xen-blkfront.c: make blkif_ioctl() static This patch makes the needlessly global blkif_ioctl() static. Signed-off-by: Adrian Bunk Acked-by: Jeremy Fitzhardinge Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 9ae05c584234..3ca643cafccd 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -154,8 +154,8 @@ static int blkif_getgeo(struct block_device *bd, struct hd_geometry *hg) return 0; } -int blkif_ioctl(struct inode *inode, struct file *filep, - unsigned command, unsigned long argument) +static int blkif_ioctl(struct inode *inode, struct file *filep, + unsigned command, unsigned long argument) { struct blkfront_info *info = inode->i_bdev->bd_disk->private_data; -- cgit v1.2.3 From 9ea7d5ad84d61a4e8b892d5ed12ccc26f9d6351b Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 5 Aug 2008 18:50:18 -0400 Subject: powerpc/4xx: Update defconfig files for 2.6.27-rc1 Update the defconfig files for 4xx boards. This also makes the mutli-board defconfigs a bit more useful by enabling some of the more common modules. Signed-off-by: Josh Boyer --- arch/powerpc/configs/40x/ep405_defconfig | 207 ++++++++++---- arch/powerpc/configs/40x/kilauea_defconfig | 196 +++++++++---- arch/powerpc/configs/40x/makalu_defconfig | 196 +++++++++---- arch/powerpc/configs/40x/walnut_defconfig | 203 +++++++++---- arch/powerpc/configs/44x/bamboo_defconfig | 206 +++++++++----- arch/powerpc/configs/44x/canyonlands_defconfig | 116 +++++--- arch/powerpc/configs/44x/ebony_defconfig | 207 ++++++++++---- arch/powerpc/configs/44x/katmai_defconfig | 259 +++++++++++------ arch/powerpc/configs/44x/rainier_defconfig | 207 +++++++++----- arch/powerpc/configs/44x/sam440ep_defconfig | 109 +++++-- arch/powerpc/configs/44x/sequoia_defconfig | 207 +++++++++----- arch/powerpc/configs/44x/taishan_defconfig | 208 +++++++++----- arch/powerpc/configs/44x/virtex5_defconfig | 100 +++++-- arch/powerpc/configs/44x/warp_defconfig | 232 ++++++++++----- arch/powerpc/configs/ppc40x_defconfig | 374 +++++++++++++++++++----- arch/powerpc/configs/ppc44x_defconfig | 375 +++++++++++++++++++++++-- 16 files changed, 2510 insertions(+), 892 deletions(-) diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig index e24240a9a047..2113ae2ab401 100644 --- a/arch/powerpc/configs/40x/ep405_defconfig +++ b/arch/powerpc/configs/40x/ep405_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:50:09 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 19:34:03 2008 # # CONFIG_PPC64 is not set @@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -75,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -108,13 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -125,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -188,7 +201,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -206,13 +218,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -222,6 +238,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -232,6 +250,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -241,17 +260,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# CONFIG_NET=y # @@ -289,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -340,6 +353,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -352,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -443,12 +459,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -466,12 +484,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -506,7 +527,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -516,12 +536,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -534,6 +554,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -541,6 +562,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -576,6 +598,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -614,12 +637,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -635,13 +655,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -658,10 +689,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -678,12 +705,16 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -701,6 +732,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -744,17 +776,16 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -769,7 +800,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -818,6 +848,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -828,14 +859,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -856,8 +885,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -867,6 +898,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -874,6 +906,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -881,9 +914,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -896,17 +932,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -918,51 +967,85 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig index 2f475391f1d1..565ed9666c54 100644 --- a/arch/powerpc/configs/40x/kilauea_defconfig +++ b/arch/powerpc/configs/40x/kilauea_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:51:43 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 19:36:14 2008 # # CONFIG_PPC64 is not set @@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -75,6 +79,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -108,13 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -125,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -186,7 +199,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -204,13 +216,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -220,6 +236,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -230,6 +248,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -239,17 +258,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# CONFIG_NET=y # @@ -287,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -338,6 +351,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -350,6 +365,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -440,6 +456,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -458,12 +475,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -502,6 +522,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -528,6 +549,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -566,12 +588,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -587,13 +606,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -610,22 +640,16 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -640,7 +664,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -689,6 +712,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -699,14 +723,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -727,8 +749,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -738,6 +762,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -745,6 +770,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -752,9 +778,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -767,17 +796,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -789,51 +831,85 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig index 9ef4d8a312c8..987a4481800f 100644 --- a/arch/powerpc/configs/40x/makalu_defconfig +++ b/arch/powerpc/configs/40x/makalu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:52:30 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 19:38:39 2008 # # CONFIG_PPC64 is not set @@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -75,6 +79,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -108,13 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -125,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -186,7 +199,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -204,13 +216,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -220,6 +236,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -230,6 +248,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -239,17 +258,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# CONFIG_NET=y # @@ -287,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -338,6 +351,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -350,6 +365,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -440,6 +456,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -458,12 +475,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -502,6 +522,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -528,6 +549,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -566,12 +588,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -587,13 +606,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -610,22 +640,16 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -640,7 +664,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -689,6 +712,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -699,14 +723,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -727,8 +749,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -738,6 +762,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -745,6 +770,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -752,9 +778,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -767,17 +796,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -789,51 +831,85 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig index 3b2689e5002a..aee79338f41f 100644 --- a/arch/powerpc/configs/40x/walnut_defconfig +++ b/arch/powerpc/configs/40x/walnut_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:54:12 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 19:40:56 2008 # # CONFIG_PPC64 is not set @@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -75,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -108,13 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -125,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -189,7 +202,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -207,13 +219,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -223,6 +239,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -233,6 +251,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -242,17 +261,13 @@ CONFIG_ARCH_SUPPORTS_MSI=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# CONFIG_NET=y # @@ -290,8 +305,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -341,6 +354,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -353,6 +368,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -443,12 +459,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -466,12 +484,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -506,7 +527,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -516,12 +536,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -534,6 +554,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -541,6 +562,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -567,6 +589,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -605,12 +628,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -626,13 +646,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -649,16 +680,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -667,13 +696,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -688,7 +715,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -737,6 +763,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -747,14 +774,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -775,8 +800,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -786,6 +813,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -793,6 +821,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -800,9 +829,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -815,17 +847,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -837,51 +882,85 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig index c44db554cdc6..e920693535af 100644 --- a/arch/powerpc/configs/44x/bamboo_defconfig +++ b/arch/powerpc/configs/44x/bamboo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:36:39 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 08:43:44 2008 # # CONFIG_PPC64 is not set @@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -79,6 +83,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -112,13 +118,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -129,6 +144,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -143,24 +159,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set CONFIG_BAMBOO=y # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set @@ -193,7 +210,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -211,14 +227,18 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -227,6 +247,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -237,6 +259,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,17 +269,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -294,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -345,6 +362,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -370,12 +389,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -393,12 +414,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -433,7 +457,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -443,12 +466,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -461,6 +484,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -468,6 +492,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -494,6 +519,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -532,12 +558,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -553,13 +576,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -576,16 +610,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -594,13 +626,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -615,7 +645,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -663,6 +692,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -673,14 +703,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -701,8 +729,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -712,6 +742,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -719,6 +750,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -726,9 +758,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -741,19 +776,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -765,51 +811,85 @@ CONFIG_DEBUGGER=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig index a3b763c45ec6..74da5c7754a4 100644 --- a/arch/powerpc/configs/44x/canyonlands_defconfig +++ b/arch/powerpc/configs/44x/canyonlands_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc1 -# Thu Feb 21 14:29:28 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 08:46:14 2008 # # CONFIG_PPC64 is not set @@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -73,8 +77,9 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -83,12 +88,12 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y -# CONFIG_LOGBUFFER is not set CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_COMPAT_BRK=y @@ -109,13 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -126,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -140,25 +155,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set CONFIG_CANYONLANDS=y +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_460EX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -190,7 +205,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -208,16 +222,19 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y CONFIG_ISA_DMA_API=y # @@ -225,6 +242,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -235,6 +254,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,17 +264,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -292,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -343,6 +357,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -368,6 +384,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -386,12 +403,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -430,6 +450,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -456,6 +477,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -494,16 +516,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -515,13 +535,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -538,22 +569,16 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -568,7 +593,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -616,6 +640,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -626,14 +651,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -654,8 +677,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -665,6 +690,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -672,6 +698,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -679,9 +706,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -694,19 +724,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -719,3 +760,4 @@ CONFIG_DEBUGGER=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig index 07c8d4ce175a..17615750b494 100644 --- a/arch/powerpc/configs/44x/ebony_defconfig +++ b/arch/powerpc/configs/44x/ebony_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:50:44 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:04:12 2008 # # CONFIG_PPC64 is not set @@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -111,13 +117,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -128,6 +143,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set CONFIG_EBONY=y +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440GP=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -192,7 +209,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y @@ -210,13 +226,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -355,6 +374,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -444,12 +464,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -467,12 +489,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -507,7 +532,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -517,12 +541,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -535,6 +559,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -542,6 +567,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -568,6 +594,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -606,12 +633,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -627,13 +651,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -650,16 +685,14 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -668,13 +701,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -689,7 +720,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -748,6 +778,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -758,14 +789,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -786,8 +815,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -798,6 +829,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -805,6 +837,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -812,9 +845,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -827,17 +863,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -849,50 +898,84 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig index c8804ec01ea4..7bc4082a1c93 100644 --- a/arch/powerpc/configs/44x/katmai_defconfig +++ b/arch/powerpc/configs/44x/katmai_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Mon Dec 24 11:17:43 2007 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:06:51 2008 # # CONFIG_PPC64 is not set @@ -29,7 +29,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -67,23 +72,22 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -91,11 +95,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -103,10 +109,26 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -117,6 +139,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -130,23 +153,28 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set CONFIG_KATMAI=y # CONFIG_RAINIER is not set +# CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440SPe=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -157,7 +185,6 @@ CONFIG_440SPe=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -173,13 +200,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -190,17 +221,19 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="katmai.dts" CONFIG_ISA_DMA_API=y # @@ -208,6 +241,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -218,6 +253,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -227,17 +263,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -275,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -300,6 +330,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -325,6 +356,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -346,15 +379,19 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -371,6 +408,10 @@ CONFIG_MISC_DEVICES=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -378,14 +419,12 @@ CONFIG_MACINTOSH_DRIVERS=y # CONFIG_MAC_EMUMOUSEBTN is not set # CONFIG_WINDFARM is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -414,6 +453,8 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -421,12 +462,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -438,6 +479,8 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -445,12 +488,12 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -472,7 +515,9 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -509,15 +554,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -529,13 +573,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -552,34 +607,27 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -594,14 +642,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -643,8 +688,11 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -652,14 +700,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -675,14 +721,15 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -692,10 +739,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -703,6 +747,7 @@ CONFIG_INSTRUMENTATION=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -710,10 +755,14 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -724,19 +773,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -747,44 +807,85 @@ CONFIG_DEBUGGER=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig index dec18ca73519..0479648a9141 100644 --- a/arch/powerpc/configs/44x/rainier_defconfig +++ b/arch/powerpc/configs/44x/rainier_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:53:10 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:09:35 2008 # # CONFIG_PPC64 is not set @@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -111,13 +117,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -128,6 +143,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set CONFIG_RAINIER=y # CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440GRX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -191,7 +208,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y @@ -209,14 +225,18 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -355,6 +374,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -445,12 +465,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -468,6 +490,10 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -475,7 +501,6 @@ CONFIG_MACINTOSH_DRIVERS=y # CONFIG_MAC_EMUMOUSEBTN is not set # CONFIG_WINDFARM is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -492,7 +517,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -502,12 +526,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -520,6 +544,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -527,6 +552,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -553,6 +579,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -591,12 +618,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -612,13 +636,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -635,16 +670,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -653,13 +686,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -674,7 +705,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -733,6 +763,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -743,14 +774,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -771,8 +800,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -783,6 +814,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -790,6 +822,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -797,9 +830,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -812,19 +848,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=y @@ -849,51 +896,85 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig index 9ce5cbc2a4e7..0ed2de05f4e8 100644 --- a/arch/powerpc/configs/44x/sam440ep_defconfig +++ b/arch/powerpc/configs/44x/sam440ep_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25 -# Mon May 5 13:43:02 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:12:48 2008 # # CONFIG_PPC64 is not set @@ -30,9 +30,11 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -116,15 +118,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -135,6 +144,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -154,8 +164,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -169,6 +177,7 @@ CONFIG_SAM440EP=y # CONFIG_WARP is not set # CONFIG_CANYONLANDS is not set # CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set @@ -220,6 +229,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -228,6 +238,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -237,6 +248,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -263,10 +275,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -353,6 +361,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y @@ -379,6 +389,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -422,6 +433,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_PMP is not set @@ -481,18 +493,22 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -531,7 +547,6 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set # CONFIG_IWLWIFI_LEDS is not set # @@ -607,12 +622,14 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -661,40 +678,60 @@ CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_IBM_IIC=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -703,10 +740,13 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -718,6 +758,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -730,6 +771,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -755,7 +797,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set CONFIG_FB_MACMODES=y CONFIG_FB_BACKLIGHT=y @@ -795,10 +836,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set @@ -821,10 +865,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -859,11 +899,13 @@ CONFIG_USB_DEVICEFS=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -881,6 +923,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -900,6 +943,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -939,6 +983,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -976,6 +1021,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_M41T80_WDT=y # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -996,6 +1042,7 @@ CONFIG_RTC_DRV_M41T80_WDT=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set @@ -1074,6 +1121,7 @@ CONFIG_AFFS_FS=m # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1151,6 +1199,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1177,7 +1226,15 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig index dd5d6303c396..e40b1023265c 100644 --- a/arch/powerpc/configs/44x/sequoia_defconfig +++ b/arch/powerpc/configs/44x/sequoia_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:53:46 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:15:13 2008 # # CONFIG_PPC64 is not set @@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -79,6 +83,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -112,13 +118,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -129,6 +144,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -143,24 +159,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set CONFIG_SEQUOIA=y # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440EPX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -192,7 +209,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -210,14 +226,18 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -226,6 +246,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -236,6 +258,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -245,17 +268,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -293,8 +312,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -344,6 +361,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -356,6 +375,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -446,12 +466,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -469,12 +491,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -509,7 +534,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -519,12 +543,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -537,6 +561,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -544,6 +569,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -570,6 +596,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -608,12 +635,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -629,13 +653,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -652,16 +687,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -670,13 +703,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -691,7 +722,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -750,6 +780,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -760,14 +791,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -788,8 +817,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -800,6 +831,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -807,6 +839,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -814,9 +847,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -829,19 +865,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=y @@ -866,51 +913,85 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig index e53c92655bd6..5075873bdb1b 100644 --- a/arch/powerpc/configs/44x/taishan_defconfig +++ b/arch/powerpc/configs/44x/taishan_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:40:44 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:17:48 2008 # # CONFIG_PPC64 is not set @@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -111,13 +117,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -128,6 +143,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set CONFIG_TAISHAN=y # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440GX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -191,7 +208,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -209,14 +225,18 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -354,6 +373,8 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -444,12 +465,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -467,6 +490,10 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -474,7 +501,6 @@ CONFIG_MACINTOSH_DRIVERS=y # CONFIG_MAC_EMUMOUSEBTN is not set # CONFIG_WINDFARM is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -509,7 +535,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -519,12 +544,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -537,6 +562,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -544,6 +570,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -570,6 +597,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -608,12 +636,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -629,13 +654,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -652,16 +688,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -670,13 +704,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -691,7 +723,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -740,6 +771,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -750,14 +782,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -778,8 +808,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -789,6 +821,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -796,6 +829,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -803,9 +837,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -818,19 +855,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -842,51 +890,85 @@ CONFIG_DEBUGGER=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig index 9c41f66b5a7d..663ec512b33b 100644 --- a/arch/powerpc/configs/44x/virtex5_defconfig +++ b/arch/powerpc/configs/44x/virtex5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc8 -# Wed Jul 2 15:36:41 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:20:16 2008 # # CONFIG_PPC64 is not set @@ -29,9 +29,11 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -115,10 +117,16 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -135,6 +143,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -154,13 +163,12 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set @@ -221,6 +229,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -239,6 +248,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -265,10 +275,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -446,7 +452,9 @@ CONFIG_IP_NF_MANGLE=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set @@ -471,12 +479,14 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -503,7 +513,6 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -532,7 +541,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -547,6 +555,7 @@ CONFIG_NETDEV_1000=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -619,12 +628,14 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -670,39 +681,59 @@ CONFIG_I2C_CHARDEV=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_IBM_IIC is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_IBM_IIC is not set +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -711,10 +742,13 @@ CONFIG_I2C_DEBUG_ALGO=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -726,6 +760,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -799,6 +834,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set CONFIG_FB_XILINX=y # CONFIG_FB_VIRTUAL is not set @@ -831,10 +867,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set @@ -910,6 +942,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y @@ -920,17 +953,16 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=y @@ -994,6 +1026,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1018,7 +1051,16 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1071,6 +1113,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index 2313c3e8ef61..d9375a969c67 100644 --- a/arch/powerpc/configs/44x/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:54:43 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:23:39 2008 # # CONFIG_PPC64 is not set @@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -79,6 +83,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -111,13 +117,22 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -128,6 +143,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,23 +158,24 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set CONFIG_WARP=y +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set @@ -191,7 +208,6 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -209,14 +225,18 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="ip=on" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -224,10 +244,13 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -237,17 +260,13 @@ CONFIG_ZONE_DMA=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -291,8 +310,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -318,6 +335,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_ATM is not set # CONFIG_BRIDGE is not set CONFIG_VLAN_8021Q=y +# CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set @@ -368,6 +386,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -446,6 +465,7 @@ CONFIG_MTD_NAND_IDS=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -460,6 +480,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -504,11 +525,11 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -538,6 +559,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -571,6 +593,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -608,44 +631,49 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_IBM_IIC is not set # CONFIG_I2C_MPC is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -658,6 +686,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -698,6 +727,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -709,13 +739,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -730,10 +771,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -750,11 +787,15 @@ CONFIG_USB=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -770,6 +811,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -790,6 +832,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -825,6 +868,7 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set @@ -836,19 +880,19 @@ CONFIG_MMC=m CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # # MMC/SD Host Controller Drivers # +# CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -863,7 +907,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -924,6 +967,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -934,14 +978,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1001,8 +1043,10 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1013,6 +1057,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1020,6 +1065,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1027,9 +1073,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1041,17 +1090,30 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -1063,48 +1125,82 @@ CONFIG_BDI_SWITCH=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig index 9d0140e3838e..6a5b713a07e0 100644 --- a/arch/powerpc/configs/ppc40x_defconfig +++ b/arch/powerpc/configs/ppc40x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc9 -# Tue Apr 15 08:46:44 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 12:34:33 2008 # # CONFIG_PPC64 is not set @@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -84,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -109,14 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -127,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -146,11 +160,10 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_XILINX_VIRTEX=y CONFIG_EP405=y CONFIG_KILAUEA=y CONFIG_MAKALU=y @@ -158,7 +171,6 @@ CONFIG_WALNUT=y CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y CONFIG_405GP=y CONFIG_405EX=y -CONFIG_XILINX_VIRTEX=y CONFIG_XILINX_VIRTEX_II_PRO=y CONFIG_XILINX_VIRTEX_4_FX=y CONFIG_IBM405_ERR77=y @@ -211,7 +223,9 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -219,6 +233,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -229,6 +244,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -239,6 +255,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -248,17 +265,13 @@ CONFIG_ARCH_SUPPORTS_MSI=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# CONFIG_NET=y # @@ -267,6 +280,11 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -284,7 +302,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -295,9 +313,25 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -347,6 +381,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -359,6 +395,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -429,8 +466,17 @@ CONFIG_MTD_PHYSMAP_OF=y # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=m # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -449,12 +495,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -472,12 +520,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -512,7 +563,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -522,12 +572,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -540,6 +590,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -547,6 +598,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -573,6 +625,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -611,13 +664,76 @@ CONFIG_XILINX_HWICAP=m # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m # -# SPI support +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + # +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=m +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -633,13 +749,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -656,16 +783,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -674,14 +799,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -690,13 +812,18 @@ CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -715,8 +842,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=m # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -741,10 +871,27 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=m +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -755,14 +902,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -776,20 +921,64 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y @@ -802,6 +991,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -809,9 +999,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -824,17 +1017,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -846,51 +1052,85 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index f9d279bb700b..c7825dcbf415 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc8 -# Wed Jul 9 13:50:48 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 10:01:31 2008 # # CONFIG_PPC64 is not set @@ -30,9 +30,11 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -116,10 +118,16 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -136,6 +144,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -155,8 +164,6 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -231,6 +238,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -248,6 +256,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -275,10 +284,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -287,6 +292,11 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -304,7 +314,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -315,7 +325,25 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -365,6 +393,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -447,8 +477,17 @@ CONFIG_MTD_PHYSMAP_OF=y # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=m # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -460,6 +499,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 @@ -467,12 +507,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -480,9 +522,41 @@ CONFIG_HAVE_IDE=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -499,7 +573,6 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -534,7 +607,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -549,6 +621,7 @@ CONFIG_NETDEV_1000=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -570,11 +643,21 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -635,8 +718,77 @@ CONFIG_XILINX_HWICAP=m # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=m +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -653,6 +805,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -686,22 +839,113 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=m +CONFIG_USB_OHCI_HCD_PPC_OF=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +# CONFIG_USB_OHCI_HCD_PCI is not set +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -719,8 +963,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -743,8 +992,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=m # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -780,9 +1032,16 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=m +CONFIG_UBIFS_FS_XATTR=y +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -793,13 +1052,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -813,7 +1071,46 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # @@ -822,13 +1119,16 @@ CONFIG_MSDOS_PARTITION=y CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +CONFIG_CRC_T10DIF=m # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y @@ -849,6 +1149,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -866,19 +1168,28 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -934,6 +1245,10 @@ CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -962,8 +1277,8 @@ CONFIG_CRYPTO_DES=y # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set -- cgit v1.2.3 From 9e74114d96bb5dbaa17b9292139b0c6205e0b971 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Tue, 15 Jul 2008 11:18:04 +0000 Subject: [WATCHDOG] hpwdt.c - fix double includes The last clean-up created 2 times the same include. delete the doubles. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/hpwdt.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index d20f591e3fd7..7ea8f3e844f3 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -39,9 +39,7 @@ #include #include #include -#include #include -#include #define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */ #define CRU_BIOS_SIGNATURE_VALUE 0x55524324 -- cgit v1.2.3 From 089ab0791d127e8ada526c4b4d18b7584be8acf0 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Tue, 15 Jul 2008 11:46:11 +0000 Subject: [WATCHDOG] Clean-up includes Use #include instead of Use #include instead of Clean-up includes. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/acquirewdt.c | 1 - drivers/watchdog/advantechwdt.c | 4 ++-- drivers/watchdog/alim1535_wdt.c | 1 - drivers/watchdog/alim7101_wdt.c | 2 +- drivers/watchdog/bfin_wdt.c | 2 +- drivers/watchdog/geodewdt.c | 2 +- drivers/watchdog/iTCO_vendor_support.c | 1 - drivers/watchdog/ib700wdt.c | 2 +- drivers/watchdog/ixp4xx_wdt.c | 2 +- drivers/watchdog/mv64x60_wdt.c | 1 - drivers/watchdog/omap_wdt.c | 3 +-- drivers/watchdog/pcwd_pci.c | 5 ++--- drivers/watchdog/pcwd_usb.c | 3 +-- drivers/watchdog/pnx4008_wdt.c | 4 ++-- 14 files changed, 13 insertions(+), 20 deletions(-) diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c index 269ada2f1fc3..28d9057c9be6 100644 --- a/drivers/watchdog/acquirewdt.c +++ b/drivers/watchdog/acquirewdt.c @@ -65,7 +65,6 @@ #include /* For io-port access */ #include /* For platform_driver framework */ #include /* For __init/__exit/... */ - #include /* For copy_to_user/put_user/... */ #include /* For inb/outb/... */ diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c index 220d238ee427..e6bf8d2d3d30 100644 --- a/drivers/watchdog/advantechwdt.c +++ b/drivers/watchdog/advantechwdt.c @@ -37,9 +37,9 @@ #include #include #include +#include +#include -#include -#include #include #define DRV_NAME "advantechwdt" diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c index 88760cb5ec13..80e323ddc4ba 100644 --- a/drivers/watchdog/alim1535_wdt.c +++ b/drivers/watchdog/alim1535_wdt.c @@ -18,7 +18,6 @@ #include #include #include - #include #include diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c index c495f36c6aa9..726e75d9db7a 100644 --- a/drivers/watchdog/alim7101_wdt.c +++ b/drivers/watchdog/alim7101_wdt.c @@ -31,9 +31,9 @@ #include #include #include - #include #include + #include #define OUR_NAME "alim7101_wdt" diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index 2b92818cc664..8f6e871b3fe3 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -24,8 +24,8 @@ #include #include #include -#include #include +#include #define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args) #define stampit() stamp("here i am") diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index 30d09cbbad94..a41f57ce581a 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -17,8 +17,8 @@ #include #include #include +#include -#include #include #define GEODEWDT_HZ 500 diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index 09e9534ac2e4..e9e1f7b3fb75 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -31,7 +31,6 @@ #include /* For printk/panic/... */ #include /* For __init/__exit/... */ #include /* For io-port access */ - #include /* For inb/outb/... */ #include "iTCO_vendor.h" diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c index 805a54b02aa1..9eb9537c370e 100644 --- a/drivers/watchdog/ib700wdt.c +++ b/drivers/watchdog/ib700wdt.c @@ -41,9 +41,9 @@ #include #include #include - #include #include + #include static struct platform_device *ibwdt_platform_device; diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c index 24e624c847ae..1bafd7b58ca5 100644 --- a/drivers/watchdog/ixp4xx_wdt.c +++ b/drivers/watchdog/ixp4xx_wdt.c @@ -22,9 +22,9 @@ #include #include #include +#include #include -#include static int nowayout = WATCHDOG_NOWAYOUT; static int heartbeat = 60; /* (secs) Default is 1 minute */ diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c index ac09fe4d9573..acf589dc057c 100644 --- a/drivers/watchdog/mv64x60_wdt.c +++ b/drivers/watchdog/mv64x60_wdt.c @@ -22,7 +22,6 @@ #include #include #include - #include #include #include diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index ccdf069792d9..5aae071cc045 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -40,8 +40,7 @@ #include #include #include - -#include +#include #include #include diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c index 61a89e959642..a1d31d1f750f 100644 --- a/drivers/watchdog/pcwd_pci.c +++ b/drivers/watchdog/pcwd_pci.c @@ -46,9 +46,8 @@ #include /* For pci functions */ #include /* For io-port access */ #include /* For spin_lock/spin_unlock/... */ - -#include /* For copy_to_user/put_user/... */ -#include /* For inb/outb/... */ +#include /* For copy_to_user/put_user/... */ +#include /* For inb/outb/... */ /* Module and version information */ #define WATCHDOG_VERSION "1.03" diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index bf443d077a1e..825102a33910 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -40,8 +40,7 @@ #include /* For kmalloc, ... */ #include /* For mutex locking */ #include /* For HID_REQ_SET_REPORT & HID_DT_REPORT */ - -#include /* For copy_to_user/put_user/... */ +#include /* For copy_to_user/put_user/... */ #ifdef CONFIG_USB_DEBUG diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 8cd0d53941e7..56dee3bfd4aa 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -28,11 +28,11 @@ #include #include #include - -#include #include #include +#include + #define MODULE_NAME "PNX4008-WDT: " /* WatchDog Timer - Chapter 23 Page 207 */ -- cgit v1.2.3 From c9488520512df659ad21df5d100b52fed96bdf07 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 3 Jul 2008 23:51:32 -0700 Subject: [WATCHDOG] pcwd: a couple of watchdogs escaped conversion Fix them up. Once we know the long term plan the watchdogs can all get shrunk massively anyway Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/pcwd_pci.c | 8 +++----- drivers/watchdog/pcwd_usb.c | 6 +++--- 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c index a1d31d1f750f..67d90810c6e9 100644 --- a/drivers/watchdog/pcwd_pci.c +++ b/drivers/watchdog/pcwd_pci.c @@ -454,8 +454,8 @@ static ssize_t pcipcwd_write(struct file *file, const char __user *data, return len; } -static int pcipcwd_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long pcipcwd_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -477,9 +477,7 @@ static int pcipcwd_ioctl(struct inode *inode, struct file *file, case WDIOC_GETSTATUS: { int status; - pcipcwd_get_status(&status); - return put_user(status, p); } @@ -643,7 +641,7 @@ static const struct file_operations pcipcwd_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = pcipcwd_write, - .ioctl = pcipcwd_ioctl, + .unlocked_ioctl = pcipcwd_ioctl, .open = pcipcwd_open, .release = pcipcwd_release, }; diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index 825102a33910..bc399cf65cf7 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -368,8 +368,8 @@ static ssize_t usb_pcwd_write(struct file *file, const char __user *data, return len; } -static int usb_pcwd_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long usb_pcwd_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -534,7 +534,7 @@ static const struct file_operations usb_pcwd_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = usb_pcwd_write, - .ioctl = usb_pcwd_ioctl, + .unlocked_ioctl = usb_pcwd_ioctl, .open = usb_pcwd_open, .release = usb_pcwd_release, }; -- cgit v1.2.3 From ef8ab12ec2d663f9b146c920a4dd589a7e767f2d Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 3 Jul 2008 23:51:32 -0700 Subject: [WATCHDOG] mpc83xx_wdt: convert to the OF platform driver This patch simply converts mpc83xx_wdt to the OF platform driver so we can directly work with the device tree without passing various stuff through platform data. Signed-off-by: Anton Vorontsov Acked-by: Stephen Rothwell Cc: Kumar Gala Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/mpc83xx_wdt.c | 61 +++++++++++++++++++++--------------------- 1 file changed, 30 insertions(+), 31 deletions(-) diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc83xx_wdt.c index 109eea0df2d0..5f1b7bff8f12 100644 --- a/drivers/watchdog/mpc83xx_wdt.c +++ b/drivers/watchdog/mpc83xx_wdt.c @@ -19,11 +19,12 @@ #include #include #include -#include +#include #include #include #include #include +#include struct mpc83xx_wdt { __be32 res0; @@ -149,52 +150,42 @@ static struct miscdevice mpc83xx_wdt_miscdev = { .fops = &mpc83xx_wdt_fops, }; -static int __devinit mpc83xx_wdt_probe(struct platform_device *dev) +static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev, + const struct of_device_id *match) { - struct resource *r; int ret; - unsigned int *freq = dev->dev.platform_data; + u32 freq = fsl_get_sys_freq(); - /* get a pointer to the register memory */ - r = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!freq || freq == -1) + return -EINVAL; - if (!r) { - ret = -ENODEV; - goto err_out; - } - - wd_base = ioremap(r->start, sizeof(struct mpc83xx_wdt)); - if (wd_base == NULL) { - ret = -ENOMEM; - goto err_out; - } + wd_base = of_iomap(ofdev->node, 0); + if (!wd_base) + return -ENOMEM; ret = misc_register(&mpc83xx_wdt_miscdev); if (ret) { - printk(KERN_ERR "cannot register miscdev on minor=%d " - "(err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto err_unmap; } /* Calculate the timeout in seconds */ if (prescale) - timeout_sec = (timeout * 0x10000) / (*freq); + timeout_sec = (timeout * 0x10000) / freq; else - timeout_sec = timeout / (*freq); + timeout_sec = timeout / freq; - printk(KERN_INFO "WDT driver for MPC83xx initialized. " - "mode:%s timeout=%d (%d seconds)\n", - reset ? "reset":"interrupt", timeout, timeout_sec); + pr_info("WDT driver for MPC83xx initialized. mode:%s timeout=%d " + "(%d seconds)\n", reset ? "reset" : "interrupt", timeout, + timeout_sec); return 0; - err_unmap: iounmap(wd_base); -err_out: return ret; } -static int __devexit mpc83xx_wdt_remove(struct platform_device *dev) +static int __devexit mpc83xx_wdt_remove(struct of_device *ofdev) { misc_deregister(&mpc83xx_wdt_miscdev); iounmap(wd_base); @@ -202,7 +193,16 @@ static int __devexit mpc83xx_wdt_remove(struct platform_device *dev) return 0; } -static struct platform_driver mpc83xx_wdt_driver = { +static const struct of_device_id mpc83xx_wdt_match[] = { + { + .compatible = "mpc83xx_wdt", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, mpc83xx_wdt_match); + +static struct of_platform_driver mpc83xx_wdt_driver = { + .match_table = mpc83xx_wdt_match, .probe = mpc83xx_wdt_probe, .remove = __devexit_p(mpc83xx_wdt_remove), .driver = { @@ -213,12 +213,12 @@ static struct platform_driver mpc83xx_wdt_driver = { static int __init mpc83xx_wdt_init(void) { - return platform_driver_register(&mpc83xx_wdt_driver); + return of_register_platform_driver(&mpc83xx_wdt_driver); } static void __exit mpc83xx_wdt_exit(void) { - platform_driver_unregister(&mpc83xx_wdt_driver); + of_unregister_platform_driver(&mpc83xx_wdt_driver); } module_init(mpc83xx_wdt_init); @@ -228,4 +228,3 @@ MODULE_AUTHOR("Dave Updegraff, Kumar Gala"); MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx uProcessor"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -MODULE_ALIAS("platform:mpc83xx_wdt"); -- cgit v1.2.3 From 500c919e3d699644cc9d6c1e93022481baafd8e1 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 3 Jul 2008 23:51:34 -0700 Subject: [WATCHDOG] mpc83xx_wdt: add support for MPC86xx CPUs On MPC86xx the watchdog could be enabled only at power-on-reset, and could not be disabled afterwards. We must ping the watchdog from the kernel until the userspace handles it. MPC83xx CPUs are only differ in a way that watchdog could be disabled once, but after it was enabled via software it becomes just the same as MPC86xx. Thus, to support MPC86xx I added the kernel timer which pings the watchdog until the userspace opens it. Since we implemented the timer, now we're able to implement proper handling for the CONFIG_WATCHDOG_NOWAYOUT case, for MPC83xx and MPC86xx. Also move the probe code into subsys_initcall, because we want start pinging the watchdog ASAP, and misc devices are available in subsys_initcall. Signed-off-by: Anton Vorontsov Cc: Kumar Gala Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/Kconfig | 4 +-- drivers/watchdog/mpc83xx_wdt.c | 80 +++++++++++++++++++++++++++++++++++++----- 2 files changed, 74 insertions(+), 10 deletions(-) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 48399e134c0d..93329620f447 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -696,8 +696,8 @@ config 8xx_WDT depends on 8xx config 83xx_WDT - tristate "MPC83xx Watchdog Timer" - depends on PPC_83xx + tristate "MPC83xx/MPC86xx Watchdog Timer" + depends on PPC_83xx || PPC_86xx config MV64X60_WDT tristate "MV64X60 (Marvell Discovery) Watchdog Timer" diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc83xx_wdt.c index 5f1b7bff8f12..fa82ec99ba81 100644 --- a/drivers/watchdog/mpc83xx_wdt.c +++ b/drivers/watchdog/mpc83xx_wdt.c @@ -1,10 +1,12 @@ /* - * mpc83xx_wdt.c - MPC83xx watchdog userspace interface + * mpc83xx_wdt.c - MPC83xx/MPC86xx watchdog userspace interface * * Authors: Dave Updegraff * Kumar Gala * Attribution: from 83xx_wst: Florian Schirmer * ..and from sc520_wdt + * Copyright (c) 2008 MontaVista Software, Inc. + * Anton Vorontsov * * Note: it appears that you can only actually ENABLE or DISABLE the thing * once after POR. Once enabled, you cannot disable, and vice versa. @@ -18,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -39,6 +42,11 @@ struct mpc83xx_wdt { u8 res2[0xF0]; }; +struct mpc83xx_wdt_type { + int prescaler; + bool hw_enabled; +}; + static struct mpc83xx_wdt __iomem *wd_base; static u16 timeout = 0xffff; @@ -51,6 +59,11 @@ module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset"); +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + /* * We always prescale, but if someone really doesn't want to they can set this * to 0 @@ -70,6 +83,22 @@ static void mpc83xx_wdt_keepalive(void) spin_unlock(&wdt_spinlock); } +static void mpc83xx_wdt_timer_ping(unsigned long arg); +static DEFINE_TIMER(wdt_timer, mpc83xx_wdt_timer_ping, 0, 0); + +static void mpc83xx_wdt_timer_ping(unsigned long arg) +{ + mpc83xx_wdt_keepalive(); + /* We're pinging it twice faster than needed, just to be sure. */ + mod_timer(&wdt_timer, jiffies + HZ * timeout_sec / 2); +} + +static void mpc83xx_wdt_pr_warn(const char *msg) +{ + pr_crit("mpc83xx_wdt: %s, expect the %s soon!\n", msg, + reset ? "reset" : "machine check exception"); +} + static ssize_t mpc83xx_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { @@ -85,7 +114,8 @@ static int mpc83xx_wdt_open(struct inode *inode, struct file *file) return -EBUSY; /* Once we start the watchdog we can't stop it */ - __module_get(THIS_MODULE); + if (nowayout) + __module_get(THIS_MODULE); /* Good, fire up the show */ if (prescale) @@ -97,13 +127,17 @@ static int mpc83xx_wdt_open(struct inode *inode, struct file *file) out_be32(&wd_base->swcrr, tmp); + del_timer_sync(&wdt_timer); + return nonseekable_open(inode, file); } static int mpc83xx_wdt_release(struct inode *inode, struct file *file) { - printk(KERN_CRIT "Unexpected close, not stopping watchdog!\n"); - mpc83xx_wdt_keepalive(); + if (!nowayout) + mpc83xx_wdt_timer_ping(0); + else + mpc83xx_wdt_pr_warn("watchdog closed"); clear_bit(0, &wdt_is_open); return 0; } @@ -154,15 +188,25 @@ static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev, const struct of_device_id *match) { int ret; + struct device_node *np = ofdev->node; + struct mpc83xx_wdt_type *wdt_type = match->data; u32 freq = fsl_get_sys_freq(); + bool enabled; if (!freq || freq == -1) return -EINVAL; - wd_base = of_iomap(ofdev->node, 0); + wd_base = of_iomap(np, 0); if (!wd_base) return -ENOMEM; + enabled = in_be32(&wd_base->swcrr) & SWCRR_SWEN; + if (!enabled && wdt_type->hw_enabled) { + pr_info("mpc83xx_wdt: could not be enabled in software\n"); + ret = -ENOSYS; + goto err_unmap; + } + ret = misc_register(&mpc83xx_wdt_miscdev); if (ret) { pr_err("cannot register miscdev on minor=%d (err=%d)\n", @@ -172,13 +216,21 @@ static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev, /* Calculate the timeout in seconds */ if (prescale) - timeout_sec = (timeout * 0x10000) / freq; + timeout_sec = (timeout * wdt_type->prescaler) / freq; else timeout_sec = timeout / freq; pr_info("WDT driver for MPC83xx initialized. mode:%s timeout=%d " "(%d seconds)\n", reset ? "reset" : "interrupt", timeout, timeout_sec); + + /* + * If the watchdog was previously enabled or we're running on + * MPC86xx, we should ping the wdt from the kernel until the + * userspace handles it. + */ + if (enabled) + mpc83xx_wdt_timer_ping(0); return 0; err_unmap: iounmap(wd_base); @@ -187,6 +239,8 @@ err_unmap: static int __devexit mpc83xx_wdt_remove(struct of_device *ofdev) { + mpc83xx_wdt_pr_warn("watchdog removed"); + del_timer_sync(&wdt_timer); misc_deregister(&mpc83xx_wdt_miscdev); iounmap(wd_base); @@ -196,6 +250,16 @@ static int __devexit mpc83xx_wdt_remove(struct of_device *ofdev) static const struct of_device_id mpc83xx_wdt_match[] = { { .compatible = "mpc83xx_wdt", + .data = &(struct mpc83xx_wdt_type) { + .prescaler = 0x10000, + }, + }, + { + .compatible = "fsl,mpc8610-wdt", + .data = &(struct mpc83xx_wdt_type) { + .prescaler = 0x10000, + .hw_enabled = true, + }, }, {}, }; @@ -221,10 +285,10 @@ static void __exit mpc83xx_wdt_exit(void) of_unregister_platform_driver(&mpc83xx_wdt_driver); } -module_init(mpc83xx_wdt_init); +subsys_initcall(mpc83xx_wdt_init); module_exit(mpc83xx_wdt_exit); MODULE_AUTHOR("Dave Updegraff, Kumar Gala"); -MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx uProcessor"); +MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx/MPC86xx uProcessors"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -- cgit v1.2.3 From 28acd02f9f9efe44718de3bbe8be22d6dfb7e47f Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 3 Jul 2008 23:51:34 -0700 Subject: [WATCHDOG] mpc83xx_wdt: rename to mpc8xxx_wdt Rename the driver because now we support some MPC86xx processors. There are no changes to the mpc83xx_wdt.c file, yet. When possible, we do file renames and changes separately (because Linus once asked so, because it helps git to track the renamed files). Signed-off-by: Anton Vorontsov Cc: Kumar Gala Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/Kconfig | 11 +- drivers/watchdog/Makefile | 2 +- drivers/watchdog/mpc83xx_wdt.c | 294 ----------------------------------------- drivers/watchdog/mpc8xxx_wdt.c | 294 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 304 insertions(+), 297 deletions(-) delete mode 100644 drivers/watchdog/mpc83xx_wdt.c create mode 100644 drivers/watchdog/mpc8xxx_wdt.c diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 93329620f447..01e33e80eac0 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -695,9 +695,16 @@ config 8xx_WDT tristate "MPC8xx Watchdog Timer" depends on 8xx -config 83xx_WDT - tristate "MPC83xx/MPC86xx Watchdog Timer" +config 8xxx_WDT + tristate "MPC8xxx Platform Watchdog Timer" depends on PPC_83xx || PPC_86xx + help + This driver is for a SoC level watchdog that exists on some + Freescale PowerPC processors. So far this driver supports: + - MPC83xx watchdogs + - MPC86xx watchdogs + + For BookE processors (MPC85xx) use the BOOKE_WDT driver instead. config MV64X60_WDT tristate "MV64X60 (Marvell Discovery) Watchdog Timer" diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index edd305a64e63..cdd674ffaa21 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -103,7 +103,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o # POWERPC Architecture obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o obj-$(CONFIG_MPC5200_WDT) += mpc5200_wdt.o -obj-$(CONFIG_83xx_WDT) += mpc83xx_wdt.o +obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc83xx_wdt.c deleted file mode 100644 index fa82ec99ba81..000000000000 --- a/drivers/watchdog/mpc83xx_wdt.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * mpc83xx_wdt.c - MPC83xx/MPC86xx watchdog userspace interface - * - * Authors: Dave Updegraff - * Kumar Gala - * Attribution: from 83xx_wst: Florian Schirmer - * ..and from sc520_wdt - * Copyright (c) 2008 MontaVista Software, Inc. - * Anton Vorontsov - * - * Note: it appears that you can only actually ENABLE or DISABLE the thing - * once after POR. Once enabled, you cannot disable, and vice versa. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct mpc83xx_wdt { - __be32 res0; - __be32 swcrr; /* System watchdog control register */ -#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */ -#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */ -#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit.*/ -#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */ - __be32 swcnr; /* System watchdog count register */ - u8 res1[2]; - __be16 swsrr; /* System watchdog service register */ - u8 res2[0xF0]; -}; - -struct mpc83xx_wdt_type { - int prescaler; - bool hw_enabled; -}; - -static struct mpc83xx_wdt __iomem *wd_base; - -static u16 timeout = 0xffff; -module_param(timeout, ushort, 0); -MODULE_PARM_DESC(timeout, - "Watchdog timeout in ticks. (0swsrr, 0x556c); - out_be16(&wd_base->swsrr, 0xaa39); - spin_unlock(&wdt_spinlock); -} - -static void mpc83xx_wdt_timer_ping(unsigned long arg); -static DEFINE_TIMER(wdt_timer, mpc83xx_wdt_timer_ping, 0, 0); - -static void mpc83xx_wdt_timer_ping(unsigned long arg) -{ - mpc83xx_wdt_keepalive(); - /* We're pinging it twice faster than needed, just to be sure. */ - mod_timer(&wdt_timer, jiffies + HZ * timeout_sec / 2); -} - -static void mpc83xx_wdt_pr_warn(const char *msg) -{ - pr_crit("mpc83xx_wdt: %s, expect the %s soon!\n", msg, - reset ? "reset" : "machine check exception"); -} - -static ssize_t mpc83xx_wdt_write(struct file *file, const char __user *buf, - size_t count, loff_t *ppos) -{ - if (count) - mpc83xx_wdt_keepalive(); - return count; -} - -static int mpc83xx_wdt_open(struct inode *inode, struct file *file) -{ - u32 tmp = SWCRR_SWEN; - if (test_and_set_bit(0, &wdt_is_open)) - return -EBUSY; - - /* Once we start the watchdog we can't stop it */ - if (nowayout) - __module_get(THIS_MODULE); - - /* Good, fire up the show */ - if (prescale) - tmp |= SWCRR_SWPR; - if (reset) - tmp |= SWCRR_SWRI; - - tmp |= timeout << 16; - - out_be32(&wd_base->swcrr, tmp); - - del_timer_sync(&wdt_timer); - - return nonseekable_open(inode, file); -} - -static int mpc83xx_wdt_release(struct inode *inode, struct file *file) -{ - if (!nowayout) - mpc83xx_wdt_timer_ping(0); - else - mpc83xx_wdt_pr_warn("watchdog closed"); - clear_bit(0, &wdt_is_open); - return 0; -} - -static long mpc83xx_wdt_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - void __user *argp = (void __user *)arg; - int __user *p = argp; - static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING, - .firmware_version = 1, - .identity = "MPC83xx", - }; - - switch (cmd) { - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - mpc83xx_wdt_keepalive(); - return 0; - case WDIOC_GETTIMEOUT: - return put_user(timeout_sec, p); - default: - return -ENOTTY; - } -} - -static const struct file_operations mpc83xx_wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = mpc83xx_wdt_write, - .unlocked_ioctl = mpc83xx_wdt_ioctl, - .open = mpc83xx_wdt_open, - .release = mpc83xx_wdt_release, -}; - -static struct miscdevice mpc83xx_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &mpc83xx_wdt_fops, -}; - -static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev, - const struct of_device_id *match) -{ - int ret; - struct device_node *np = ofdev->node; - struct mpc83xx_wdt_type *wdt_type = match->data; - u32 freq = fsl_get_sys_freq(); - bool enabled; - - if (!freq || freq == -1) - return -EINVAL; - - wd_base = of_iomap(np, 0); - if (!wd_base) - return -ENOMEM; - - enabled = in_be32(&wd_base->swcrr) & SWCRR_SWEN; - if (!enabled && wdt_type->hw_enabled) { - pr_info("mpc83xx_wdt: could not be enabled in software\n"); - ret = -ENOSYS; - goto err_unmap; - } - - ret = misc_register(&mpc83xx_wdt_miscdev); - if (ret) { - pr_err("cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); - goto err_unmap; - } - - /* Calculate the timeout in seconds */ - if (prescale) - timeout_sec = (timeout * wdt_type->prescaler) / freq; - else - timeout_sec = timeout / freq; - - pr_info("WDT driver for MPC83xx initialized. mode:%s timeout=%d " - "(%d seconds)\n", reset ? "reset" : "interrupt", timeout, - timeout_sec); - - /* - * If the watchdog was previously enabled or we're running on - * MPC86xx, we should ping the wdt from the kernel until the - * userspace handles it. - */ - if (enabled) - mpc83xx_wdt_timer_ping(0); - return 0; -err_unmap: - iounmap(wd_base); - return ret; -} - -static int __devexit mpc83xx_wdt_remove(struct of_device *ofdev) -{ - mpc83xx_wdt_pr_warn("watchdog removed"); - del_timer_sync(&wdt_timer); - misc_deregister(&mpc83xx_wdt_miscdev); - iounmap(wd_base); - - return 0; -} - -static const struct of_device_id mpc83xx_wdt_match[] = { - { - .compatible = "mpc83xx_wdt", - .data = &(struct mpc83xx_wdt_type) { - .prescaler = 0x10000, - }, - }, - { - .compatible = "fsl,mpc8610-wdt", - .data = &(struct mpc83xx_wdt_type) { - .prescaler = 0x10000, - .hw_enabled = true, - }, - }, - {}, -}; -MODULE_DEVICE_TABLE(of, mpc83xx_wdt_match); - -static struct of_platform_driver mpc83xx_wdt_driver = { - .match_table = mpc83xx_wdt_match, - .probe = mpc83xx_wdt_probe, - .remove = __devexit_p(mpc83xx_wdt_remove), - .driver = { - .name = "mpc83xx_wdt", - .owner = THIS_MODULE, - }, -}; - -static int __init mpc83xx_wdt_init(void) -{ - return of_register_platform_driver(&mpc83xx_wdt_driver); -} - -static void __exit mpc83xx_wdt_exit(void) -{ - of_unregister_platform_driver(&mpc83xx_wdt_driver); -} - -subsys_initcall(mpc83xx_wdt_init); -module_exit(mpc83xx_wdt_exit); - -MODULE_AUTHOR("Dave Updegraff, Kumar Gala"); -MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx/MPC86xx uProcessors"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c new file mode 100644 index 000000000000..fa82ec99ba81 --- /dev/null +++ b/drivers/watchdog/mpc8xxx_wdt.c @@ -0,0 +1,294 @@ +/* + * mpc83xx_wdt.c - MPC83xx/MPC86xx watchdog userspace interface + * + * Authors: Dave Updegraff + * Kumar Gala + * Attribution: from 83xx_wst: Florian Schirmer + * ..and from sc520_wdt + * Copyright (c) 2008 MontaVista Software, Inc. + * Anton Vorontsov + * + * Note: it appears that you can only actually ENABLE or DISABLE the thing + * once after POR. Once enabled, you cannot disable, and vice versa. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct mpc83xx_wdt { + __be32 res0; + __be32 swcrr; /* System watchdog control register */ +#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */ +#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */ +#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit.*/ +#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */ + __be32 swcnr; /* System watchdog count register */ + u8 res1[2]; + __be16 swsrr; /* System watchdog service register */ + u8 res2[0xF0]; +}; + +struct mpc83xx_wdt_type { + int prescaler; + bool hw_enabled; +}; + +static struct mpc83xx_wdt __iomem *wd_base; + +static u16 timeout = 0xffff; +module_param(timeout, ushort, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in ticks. (0swsrr, 0x556c); + out_be16(&wd_base->swsrr, 0xaa39); + spin_unlock(&wdt_spinlock); +} + +static void mpc83xx_wdt_timer_ping(unsigned long arg); +static DEFINE_TIMER(wdt_timer, mpc83xx_wdt_timer_ping, 0, 0); + +static void mpc83xx_wdt_timer_ping(unsigned long arg) +{ + mpc83xx_wdt_keepalive(); + /* We're pinging it twice faster than needed, just to be sure. */ + mod_timer(&wdt_timer, jiffies + HZ * timeout_sec / 2); +} + +static void mpc83xx_wdt_pr_warn(const char *msg) +{ + pr_crit("mpc83xx_wdt: %s, expect the %s soon!\n", msg, + reset ? "reset" : "machine check exception"); +} + +static ssize_t mpc83xx_wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (count) + mpc83xx_wdt_keepalive(); + return count; +} + +static int mpc83xx_wdt_open(struct inode *inode, struct file *file) +{ + u32 tmp = SWCRR_SWEN; + if (test_and_set_bit(0, &wdt_is_open)) + return -EBUSY; + + /* Once we start the watchdog we can't stop it */ + if (nowayout) + __module_get(THIS_MODULE); + + /* Good, fire up the show */ + if (prescale) + tmp |= SWCRR_SWPR; + if (reset) + tmp |= SWCRR_SWRI; + + tmp |= timeout << 16; + + out_be32(&wd_base->swcrr, tmp); + + del_timer_sync(&wdt_timer); + + return nonseekable_open(inode, file); +} + +static int mpc83xx_wdt_release(struct inode *inode, struct file *file) +{ + if (!nowayout) + mpc83xx_wdt_timer_ping(0); + else + mpc83xx_wdt_pr_warn("watchdog closed"); + clear_bit(0, &wdt_is_open); + return 0; +} + +static long mpc83xx_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING, + .firmware_version = 1, + .identity = "MPC83xx", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + mpc83xx_wdt_keepalive(); + return 0; + case WDIOC_GETTIMEOUT: + return put_user(timeout_sec, p); + default: + return -ENOTTY; + } +} + +static const struct file_operations mpc83xx_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = mpc83xx_wdt_write, + .unlocked_ioctl = mpc83xx_wdt_ioctl, + .open = mpc83xx_wdt_open, + .release = mpc83xx_wdt_release, +}; + +static struct miscdevice mpc83xx_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &mpc83xx_wdt_fops, +}; + +static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + int ret; + struct device_node *np = ofdev->node; + struct mpc83xx_wdt_type *wdt_type = match->data; + u32 freq = fsl_get_sys_freq(); + bool enabled; + + if (!freq || freq == -1) + return -EINVAL; + + wd_base = of_iomap(np, 0); + if (!wd_base) + return -ENOMEM; + + enabled = in_be32(&wd_base->swcrr) & SWCRR_SWEN; + if (!enabled && wdt_type->hw_enabled) { + pr_info("mpc83xx_wdt: could not be enabled in software\n"); + ret = -ENOSYS; + goto err_unmap; + } + + ret = misc_register(&mpc83xx_wdt_miscdev); + if (ret) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + goto err_unmap; + } + + /* Calculate the timeout in seconds */ + if (prescale) + timeout_sec = (timeout * wdt_type->prescaler) / freq; + else + timeout_sec = timeout / freq; + + pr_info("WDT driver for MPC83xx initialized. mode:%s timeout=%d " + "(%d seconds)\n", reset ? "reset" : "interrupt", timeout, + timeout_sec); + + /* + * If the watchdog was previously enabled or we're running on + * MPC86xx, we should ping the wdt from the kernel until the + * userspace handles it. + */ + if (enabled) + mpc83xx_wdt_timer_ping(0); + return 0; +err_unmap: + iounmap(wd_base); + return ret; +} + +static int __devexit mpc83xx_wdt_remove(struct of_device *ofdev) +{ + mpc83xx_wdt_pr_warn("watchdog removed"); + del_timer_sync(&wdt_timer); + misc_deregister(&mpc83xx_wdt_miscdev); + iounmap(wd_base); + + return 0; +} + +static const struct of_device_id mpc83xx_wdt_match[] = { + { + .compatible = "mpc83xx_wdt", + .data = &(struct mpc83xx_wdt_type) { + .prescaler = 0x10000, + }, + }, + { + .compatible = "fsl,mpc8610-wdt", + .data = &(struct mpc83xx_wdt_type) { + .prescaler = 0x10000, + .hw_enabled = true, + }, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, mpc83xx_wdt_match); + +static struct of_platform_driver mpc83xx_wdt_driver = { + .match_table = mpc83xx_wdt_match, + .probe = mpc83xx_wdt_probe, + .remove = __devexit_p(mpc83xx_wdt_remove), + .driver = { + .name = "mpc83xx_wdt", + .owner = THIS_MODULE, + }, +}; + +static int __init mpc83xx_wdt_init(void) +{ + return of_register_platform_driver(&mpc83xx_wdt_driver); +} + +static void __exit mpc83xx_wdt_exit(void) +{ + of_unregister_platform_driver(&mpc83xx_wdt_driver); +} + +subsys_initcall(mpc83xx_wdt_init); +module_exit(mpc83xx_wdt_exit); + +MODULE_AUTHOR("Dave Updegraff, Kumar Gala"); +MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx/MPC86xx uProcessors"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -- cgit v1.2.3 From 59ca1b0d14ca71bdefef372ccd5035341e0ca091 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 3 Jul 2008 23:51:35 -0700 Subject: [WATCHDOG] mpc8xxx_wdt: various renames, mostly s/mpc83xx/mpc8xxx/g mpc83xx_wdt.c renamed to mpc8xxx_wdt.c, now we can do various renames in the file itself. Signed-off-by: Anton Vorontsov Cc: Kumar Gala Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/mpc8xxx_wdt.c | 104 ++++++++++++++++++++--------------------- 1 file changed, 52 insertions(+), 52 deletions(-) diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c index fa82ec99ba81..8b82b91caee7 100644 --- a/drivers/watchdog/mpc8xxx_wdt.c +++ b/drivers/watchdog/mpc8xxx_wdt.c @@ -1,5 +1,5 @@ /* - * mpc83xx_wdt.c - MPC83xx/MPC86xx watchdog userspace interface + * mpc8xxx_wdt.c - MPC83xx/MPC86xx watchdog userspace interface * * Authors: Dave Updegraff * Kumar Gala @@ -29,7 +29,7 @@ #include #include -struct mpc83xx_wdt { +struct mpc8xxx_wdt { __be32 res0; __be32 swcrr; /* System watchdog control register */ #define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */ @@ -42,12 +42,12 @@ struct mpc83xx_wdt { u8 res2[0xF0]; }; -struct mpc83xx_wdt_type { +struct mpc8xxx_wdt_type { int prescaler; bool hw_enabled; }; -static struct mpc83xx_wdt __iomem *wd_base; +static struct mpc8xxx_wdt __iomem *wd_base; static u16 timeout = 0xffff; module_param(timeout, ushort, 0); @@ -74,7 +74,7 @@ static unsigned int timeout_sec; static unsigned long wdt_is_open; static DEFINE_SPINLOCK(wdt_spinlock); -static void mpc83xx_wdt_keepalive(void) +static void mpc8xxx_wdt_keepalive(void) { /* Ping the WDT */ spin_lock(&wdt_spinlock); @@ -83,31 +83,31 @@ static void mpc83xx_wdt_keepalive(void) spin_unlock(&wdt_spinlock); } -static void mpc83xx_wdt_timer_ping(unsigned long arg); -static DEFINE_TIMER(wdt_timer, mpc83xx_wdt_timer_ping, 0, 0); +static void mpc8xxx_wdt_timer_ping(unsigned long arg); +static DEFINE_TIMER(wdt_timer, mpc8xxx_wdt_timer_ping, 0, 0); -static void mpc83xx_wdt_timer_ping(unsigned long arg) +static void mpc8xxx_wdt_timer_ping(unsigned long arg) { - mpc83xx_wdt_keepalive(); + mpc8xxx_wdt_keepalive(); /* We're pinging it twice faster than needed, just to be sure. */ mod_timer(&wdt_timer, jiffies + HZ * timeout_sec / 2); } -static void mpc83xx_wdt_pr_warn(const char *msg) +static void mpc8xxx_wdt_pr_warn(const char *msg) { - pr_crit("mpc83xx_wdt: %s, expect the %s soon!\n", msg, + pr_crit("mpc8xxx_wdt: %s, expect the %s soon!\n", msg, reset ? "reset" : "machine check exception"); } -static ssize_t mpc83xx_wdt_write(struct file *file, const char __user *buf, +static ssize_t mpc8xxx_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { if (count) - mpc83xx_wdt_keepalive(); + mpc8xxx_wdt_keepalive(); return count; } -static int mpc83xx_wdt_open(struct inode *inode, struct file *file) +static int mpc8xxx_wdt_open(struct inode *inode, struct file *file) { u32 tmp = SWCRR_SWEN; if (test_and_set_bit(0, &wdt_is_open)) @@ -132,17 +132,17 @@ static int mpc83xx_wdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static int mpc83xx_wdt_release(struct inode *inode, struct file *file) +static int mpc8xxx_wdt_release(struct inode *inode, struct file *file) { if (!nowayout) - mpc83xx_wdt_timer_ping(0); + mpc8xxx_wdt_timer_ping(0); else - mpc83xx_wdt_pr_warn("watchdog closed"); + mpc8xxx_wdt_pr_warn("watchdog closed"); clear_bit(0, &wdt_is_open); return 0; } -static long mpc83xx_wdt_ioctl(struct file *file, unsigned int cmd, +static long mpc8xxx_wdt_ioctl(struct inode *inode, struct file *file, unsigned long arg) { void __user *argp = (void __user *)arg; @@ -150,7 +150,7 @@ static long mpc83xx_wdt_ioctl(struct file *file, unsigned int cmd, static struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING, .firmware_version = 1, - .identity = "MPC83xx", + .identity = "MPC8xxx", }; switch (cmd) { @@ -160,7 +160,7 @@ static long mpc83xx_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETBOOTSTATUS: return put_user(0, p); case WDIOC_KEEPALIVE: - mpc83xx_wdt_keepalive(); + mpc8xxx_wdt_keepalive(); return 0; case WDIOC_GETTIMEOUT: return put_user(timeout_sec, p); @@ -169,27 +169,27 @@ static long mpc83xx_wdt_ioctl(struct file *file, unsigned int cmd, } } -static const struct file_operations mpc83xx_wdt_fops = { +static const struct file_operations mpc8xxx_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .write = mpc83xx_wdt_write, - .unlocked_ioctl = mpc83xx_wdt_ioctl, - .open = mpc83xx_wdt_open, - .release = mpc83xx_wdt_release, + .write = mpc8xxx_wdt_write, + .unlocked_ioctl = mpc8xxx_wdt_ioctl, + .open = mpc8xxx_wdt_open, + .release = mpc8xxx_wdt_release, }; -static struct miscdevice mpc83xx_wdt_miscdev = { +static struct miscdevice mpc8xxx_wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", - .fops = &mpc83xx_wdt_fops, + .fops = &mpc8xxx_wdt_fops, }; -static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev, +static int __devinit mpc8xxx_wdt_probe(struct of_device *ofdev, const struct of_device_id *match) { int ret; struct device_node *np = ofdev->node; - struct mpc83xx_wdt_type *wdt_type = match->data; + struct mpc8xxx_wdt_type *wdt_type = match->data; u32 freq = fsl_get_sys_freq(); bool enabled; @@ -202,12 +202,12 @@ static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev, enabled = in_be32(&wd_base->swcrr) & SWCRR_SWEN; if (!enabled && wdt_type->hw_enabled) { - pr_info("mpc83xx_wdt: could not be enabled in software\n"); + pr_info("mpc8xxx_wdt: could not be enabled in software\n"); ret = -ENOSYS; goto err_unmap; } - ret = misc_register(&mpc83xx_wdt_miscdev); + ret = misc_register(&mpc8xxx_wdt_miscdev); if (ret) { pr_err("cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, ret); @@ -220,73 +220,73 @@ static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev, else timeout_sec = timeout / freq; - pr_info("WDT driver for MPC83xx initialized. mode:%s timeout=%d " + pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d " "(%d seconds)\n", reset ? "reset" : "interrupt", timeout, timeout_sec); /* * If the watchdog was previously enabled or we're running on - * MPC86xx, we should ping the wdt from the kernel until the + * MPC8xxx, we should ping the wdt from the kernel until the * userspace handles it. */ if (enabled) - mpc83xx_wdt_timer_ping(0); + mpc8xxx_wdt_timer_ping(0); return 0; err_unmap: iounmap(wd_base); return ret; } -static int __devexit mpc83xx_wdt_remove(struct of_device *ofdev) +static int __devexit mpc8xxx_wdt_remove(struct of_device *ofdev) { - mpc83xx_wdt_pr_warn("watchdog removed"); + mpc8xxx_wdt_pr_warn("watchdog removed"); del_timer_sync(&wdt_timer); - misc_deregister(&mpc83xx_wdt_miscdev); + misc_deregister(&mpc8xxx_wdt_miscdev); iounmap(wd_base); return 0; } -static const struct of_device_id mpc83xx_wdt_match[] = { +static const struct of_device_id mpc8xxx_wdt_match[] = { { .compatible = "mpc83xx_wdt", - .data = &(struct mpc83xx_wdt_type) { + .data = &(struct mpc8xxx_wdt_type) { .prescaler = 0x10000, }, }, { .compatible = "fsl,mpc8610-wdt", - .data = &(struct mpc83xx_wdt_type) { + .data = &(struct mpc8xxx_wdt_type) { .prescaler = 0x10000, .hw_enabled = true, }, }, {}, }; -MODULE_DEVICE_TABLE(of, mpc83xx_wdt_match); +MODULE_DEVICE_TABLE(of, mpc8xxx_wdt_match); -static struct of_platform_driver mpc83xx_wdt_driver = { - .match_table = mpc83xx_wdt_match, - .probe = mpc83xx_wdt_probe, - .remove = __devexit_p(mpc83xx_wdt_remove), +static struct of_platform_driver mpc8xxx_wdt_driver = { + .match_table = mpc8xxx_wdt_match, + .probe = mpc8xxx_wdt_probe, + .remove = __devexit_p(mpc8xxx_wdt_remove), .driver = { - .name = "mpc83xx_wdt", + .name = "mpc8xxx_wdt", .owner = THIS_MODULE, }, }; -static int __init mpc83xx_wdt_init(void) +static int __init mpc8xxx_wdt_init(void) { - return of_register_platform_driver(&mpc83xx_wdt_driver); + return of_register_platform_driver(&mpc8xxx_wdt_driver); } -static void __exit mpc83xx_wdt_exit(void) +static void __exit mpc8xxx_wdt_exit(void) { - of_unregister_platform_driver(&mpc83xx_wdt_driver); + of_unregister_platform_driver(&mpc8xxx_wdt_driver); } -subsys_initcall(mpc83xx_wdt_init); -module_exit(mpc83xx_wdt_exit); +subsys_initcall(mpc8xxx_wdt_init); +module_exit(mpc8xxx_wdt_exit); MODULE_AUTHOR("Dave Updegraff, Kumar Gala"); MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx/MPC86xx uProcessors"); -- cgit v1.2.3 From cb55d282a0d2156e7d40ee81726ab16b569e96d7 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 3 Jul 2008 23:51:36 -0700 Subject: [WATCHDOG] mpc8xxx_wdt: fix build CC drivers/watchdog/mpc8xxx_wdt.o drivers/watchdog/mpc8xxx_wdt.c: In function 'mpc8xxx_wdt_ioctl': drivers/watchdog/mpc8xxx_wdt.c:156: error: 'cmd' undeclared (first use in this function) drivers/watchdog/mpc8xxx_wdt.c:156: error: (Each undeclared identifier is reported only once drivers/watchdog/mpc8xxx_wdt.c:156: error: for each function it appears in.) drivers/watchdog/mpc8xxx_wdt.c: At top level: drivers/watchdog/mpc8xxx_wdt.c:176: warning: initialization from incompatible pointer type This patch ought to be folded into mpc8xxx_wdt-various-renames-mostly-s-mpc83xx-mpc8xxx-g.patch Signed-off-by: Anton Vorontsov Cc: Kumar Gala Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/mpc8xxx_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c index 8b82b91caee7..3c5ed9e26226 100644 --- a/drivers/watchdog/mpc8xxx_wdt.c +++ b/drivers/watchdog/mpc8xxx_wdt.c @@ -142,7 +142,7 @@ static int mpc8xxx_wdt_release(struct inode *inode, struct file *file) return 0; } -static long mpc8xxx_wdt_ioctl(struct inode *inode, struct file *file, +static long mpc8xxx_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; -- cgit v1.2.3 From 0d7b101404f7bedcf3f448c1667c3744551cd9ee Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 3 Jul 2008 23:51:36 -0700 Subject: [WATCHDOG] mpc8xxx_wdt: add support for MPC8xx watchdogs The mpc8xxx_wdt driver is using two registers: SWSRR to push magic numbers, and SWCRR to control the watchdog. Both registers are available on the MPC8xx, and seem to have the same offsets and semantics as in MPC83xx/MPC86xx watchdogs. The only difference is prescale value. So this driver simply works on the MPC8xx CPUs. One quirk is needed for the MPC8xx, though. It has small prescale value and slow CPU, so the watchdog resets board prior to the driver has time to load. To solve this we should split initialization in two steps: start ping the watchdog early, and register the watchdog userspace interface later. MPC823 seem to be the first CPU in MPC8xx line, so we use fsl,mpc823-wdt compatible matching. Signed-off-by: Anton Vorontsov Tested-by: Jochen Friedrich Cc: Kumar Gala Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/Kconfig | 3 ++- drivers/watchdog/mpc8xxx_wdt.c | 44 +++++++++++++++++++++++++++++++----------- 2 files changed, 35 insertions(+), 12 deletions(-) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 01e33e80eac0..50d44b4b466b 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -697,10 +697,11 @@ config 8xx_WDT config 8xxx_WDT tristate "MPC8xxx Platform Watchdog Timer" - depends on PPC_83xx || PPC_86xx + depends on PPC_8xx || PPC_83xx || PPC_86xx help This driver is for a SoC level watchdog that exists on some Freescale PowerPC processors. So far this driver supports: + - MPC8xx watchdogs - MPC83xx watchdogs - MPC86xx watchdogs diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c index 3c5ed9e26226..f2094960e662 100644 --- a/drivers/watchdog/mpc8xxx_wdt.c +++ b/drivers/watchdog/mpc8xxx_wdt.c @@ -1,5 +1,5 @@ /* - * mpc8xxx_wdt.c - MPC83xx/MPC86xx watchdog userspace interface + * mpc8xxx_wdt.c - MPC8xx/MPC83xx/MPC86xx watchdog userspace interface * * Authors: Dave Updegraff * Kumar Gala @@ -207,13 +207,6 @@ static int __devinit mpc8xxx_wdt_probe(struct of_device *ofdev, goto err_unmap; } - ret = misc_register(&mpc8xxx_wdt_miscdev); - if (ret) { - pr_err("cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); - goto err_unmap; - } - /* Calculate the timeout in seconds */ if (prescale) timeout_sec = (timeout * wdt_type->prescaler) / freq; @@ -234,6 +227,7 @@ static int __devinit mpc8xxx_wdt_probe(struct of_device *ofdev, return 0; err_unmap: iounmap(wd_base); + wd_base = NULL; return ret; } @@ -261,6 +255,12 @@ static const struct of_device_id mpc8xxx_wdt_match[] = { .hw_enabled = true, }, }, + { + .compatible = "fsl,mpc823-wdt", + .data = &(struct mpc8xxx_wdt_type) { + .prescaler = 0x800, + }, + }, {}, }; MODULE_DEVICE_TABLE(of, mpc8xxx_wdt_match); @@ -275,20 +275,42 @@ static struct of_platform_driver mpc8xxx_wdt_driver = { }, }; +/* + * We do wdt initialization in two steps: arch_initcall probes the wdt + * very early to start pinging the watchdog (misc devices are not yet + * available), and later module_init() just registers the misc device. + */ +static int __init mpc8xxx_wdt_init_late(void) +{ + int ret; + + if (!wd_base) + return -ENODEV; + + ret = misc_register(&mpc8xxx_wdt_miscdev); + if (ret) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + return ret; + } + return 0; +} +module_init(mpc8xxx_wdt_init_late); + static int __init mpc8xxx_wdt_init(void) { return of_register_platform_driver(&mpc8xxx_wdt_driver); } +arch_initcall(mpc8xxx_wdt_init); static void __exit mpc8xxx_wdt_exit(void) { of_unregister_platform_driver(&mpc8xxx_wdt_driver); } - -subsys_initcall(mpc8xxx_wdt_init); module_exit(mpc8xxx_wdt_exit); MODULE_AUTHOR("Dave Updegraff, Kumar Gala"); -MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx/MPC86xx uProcessors"); +MODULE_DESCRIPTION("Driver for watchdog timer in MPC8xx/MPC83xx/MPC86xx " + "uProcessors"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -- cgit v1.2.3 From 5eb82498e3a6da8a979c48945e3c1a85c10ccc25 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Thu, 17 Jul 2008 18:08:47 +0000 Subject: [WATCHDOG] Coding style - Indentation - part 1 This brings the watchdog drivers into line with coding style. This patch takes cares of the indentation as described in chapter 1: The preferred way to ease multiple indentation levels in a switch statement is to align the "switch" and its subordinate "case" labels in the same column instead of "double-indenting" the "case" labels. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/acquirewdt.c | 2 +- drivers/watchdog/geodewdt.c | 2 +- drivers/watchdog/pcwd_pci.c | 128 +++++++++++++++++++++--------------------- drivers/watchdog/pcwd_usb.c | 104 +++++++++++++++++----------------- drivers/watchdog/sc1200wdt.c | 1 - drivers/watchdog/sc520_wdt.c | 3 +- 6 files changed, 119 insertions(+), 121 deletions(-) diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c index 28d9057c9be6..340d1eeec16b 100644 --- a/drivers/watchdog/acquirewdt.c +++ b/drivers/watchdog/acquirewdt.c @@ -169,7 +169,7 @@ static long acq_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return 0; case WDIOC_GETTIMEOUT: - return put_user(WATCHDOG_HEARTBEAT, p); + return put_user(WATCHDOG_HEARTBEAT, p); case WDIOC_SETOPTIONS: { diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index a41f57ce581a..74c00698801d 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -149,7 +149,7 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, .identity = WATCHDOG_NAME, }; - switch(cmd) { + switch (cmd) { case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c index 67d90810c6e9..7f500ee4ee8a 100644 --- a/drivers/watchdog/pcwd_pci.c +++ b/drivers/watchdog/pcwd_pci.c @@ -470,90 +470,90 @@ static long pcipcwd_ioctl(struct file *file, unsigned int cmd, }; switch (cmd) { - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, - sizeof (ident)) ? -EFAULT : 0; - - case WDIOC_GETSTATUS: - { - int status; - pcipcwd_get_status(&status); - return put_user(status, p); - } + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, + sizeof (ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + { + int status; + pcipcwd_get_status(&status); + return put_user(status, p); + } - case WDIOC_GETBOOTSTATUS: - return put_user(pcipcwd_private.boot_status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(pcipcwd_private.boot_status, p); - case WDIOC_GETTEMP: - { - int temperature; + case WDIOC_GETTEMP: + { + int temperature; - if (pcipcwd_get_temperature(&temperature)) - return -EFAULT; + if (pcipcwd_get_temperature(&temperature)) + return -EFAULT; - return put_user(temperature, p); - } - - case WDIOC_KEEPALIVE: - pcipcwd_keepalive(); - return 0; + return put_user(temperature, p); + } - case WDIOC_SETOPTIONS: - { - int new_options, retval = -EINVAL; + case WDIOC_KEEPALIVE: + pcipcwd_keepalive(); + return 0; - if (get_user (new_options, p)) - return -EFAULT; + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; - if (new_options & WDIOS_DISABLECARD) { - if (pcipcwd_stop()) - return -EIO; - retval = 0; - } + if (get_user (new_options, p)) + return -EFAULT; - if (new_options & WDIOS_ENABLECARD) { - if (pcipcwd_start()) - return -EIO; - retval = 0; - } + if (new_options & WDIOS_DISABLECARD) { + if (pcipcwd_stop()) + return -EIO; + retval = 0; + } - if (new_options & WDIOS_TEMPPANIC) { - temp_panic = 1; - retval = 0; - } + if (new_options & WDIOS_ENABLECARD) { + if (pcipcwd_start()) + return -EIO; + retval = 0; + } - return retval; + if (new_options & WDIOS_TEMPPANIC) { + temp_panic = 1; + retval = 0; } - case WDIOC_SETTIMEOUT: - { - int new_heartbeat; + return retval; + } - if (get_user(new_heartbeat, p)) - return -EFAULT; + case WDIOC_SETTIMEOUT: + { + int new_heartbeat; - if (pcipcwd_set_heartbeat(new_heartbeat)) - return -EINVAL; + if (get_user(new_heartbeat, p)) + return -EFAULT; - pcipcwd_keepalive(); - /* Fall */ - } + if (pcipcwd_set_heartbeat(new_heartbeat)) + return -EINVAL; - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, p); + pcipcwd_keepalive(); + /* Fall */ + } - case WDIOC_GETTIMELEFT: - { - int time_left; + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); - if (pcipcwd_get_timeleft(&time_left)) - return -EFAULT; + case WDIOC_GETTIMELEFT: + { + int time_left; - return put_user(time_left, p); - } + if (pcipcwd_get_timeleft(&time_left)) + return -EFAULT; + + return put_user(time_left, p); + } - default: - return -ENOTTY; + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index bc399cf65cf7..8194435052c8 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -382,77 +382,77 @@ static long usb_pcwd_ioctl(struct file *file, unsigned int cmd, }; switch (cmd) { - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, - sizeof (ident)) ? -EFAULT : 0; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, + sizeof (ident)) ? -EFAULT : 0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); - case WDIOC_GETTEMP: - { - int temperature; + case WDIOC_GETTEMP: + { + int temperature; - if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature)) - return -EFAULT; + if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature)) + return -EFAULT; - return put_user(temperature, p); - } + return put_user(temperature, p); + } - case WDIOC_KEEPALIVE: - usb_pcwd_keepalive(usb_pcwd_device); - return 0; + case WDIOC_KEEPALIVE: + usb_pcwd_keepalive(usb_pcwd_device); + return 0; - case WDIOC_SETOPTIONS: - { - int new_options, retval = -EINVAL; + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; - if (get_user (new_options, p)) - return -EFAULT; + if (get_user (new_options, p)) + return -EFAULT; - if (new_options & WDIOS_DISABLECARD) { - usb_pcwd_stop(usb_pcwd_device); - retval = 0; - } - - if (new_options & WDIOS_ENABLECARD) { - usb_pcwd_start(usb_pcwd_device); - retval = 0; - } + if (new_options & WDIOS_DISABLECARD) { + usb_pcwd_stop(usb_pcwd_device); + retval = 0; + } - return retval; + if (new_options & WDIOS_ENABLECARD) { + usb_pcwd_start(usb_pcwd_device); + retval = 0; } - case WDIOC_SETTIMEOUT: - { - int new_heartbeat; + return retval; + } - if (get_user(new_heartbeat, p)) - return -EFAULT; + case WDIOC_SETTIMEOUT: + { + int new_heartbeat; - if (usb_pcwd_set_heartbeat(usb_pcwd_device, new_heartbeat)) - return -EINVAL; + if (get_user(new_heartbeat, p)) + return -EFAULT; - usb_pcwd_keepalive(usb_pcwd_device); - /* Fall */ - } + if (usb_pcwd_set_heartbeat(usb_pcwd_device, new_heartbeat)) + return -EINVAL; - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, p); + usb_pcwd_keepalive(usb_pcwd_device); + /* Fall */ + } - case WDIOC_GETTIMELEFT: - { - int time_left; + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); - if (usb_pcwd_get_timeleft(usb_pcwd_device, &time_left)) - return -EFAULT; + case WDIOC_GETTIMELEFT: + { + int time_left; - return put_user(time_left, p); - } + if (usb_pcwd_get_timeleft(usb_pcwd_device, &time_left)) + return -EFAULT; + + return put_user(time_left, p); + } - default: - return -ENOTTY; + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index 621ebad56d86..03e67fa4d689 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -196,7 +196,6 @@ static long sc1200wdt_ioctl(struct file *file, unsigned int cmd, }; switch (cmd) { - case WDIOC_GETSUPPORT: if (copy_to_user(argp, &ident, sizeof ident)) return -EFAULT; diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c index 01de239f49e8..1d5ba15dec63 100644 --- a/drivers/watchdog/sc520_wdt.c +++ b/drivers/watchdog/sc520_wdt.c @@ -290,8 +290,7 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) .identity = "SC520", }; - switch (cmd) - { + switch (cmd) { default: return -ENOTTY; case WDIOC_GETSUPPORT: -- cgit v1.2.3 From 0c06090c9472db0525cb6fe229c3bea33bbbbb3c Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Fri, 18 Jul 2008 11:41:17 +0000 Subject: [WATCHDOG] Coding style - Indentation - part 2 This brings the watchdog drivers into line with coding style. This patch takes cares of the indentation as described in chapter 1. Main changes: * Re-structure the ioctl switch call for all drivers as follows: switch (cmd) { case WDIOC_GETSUPPORT: case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: case WDIOC_GETTEMP: case WDIOC_SETOPTIONS: case WDIOC_KEEPALIVE: case WDIOC_SETTIMEOUT: case WDIOC_GETTIMEOUT: case WDIOC_GETTIMELEFT: default: } This to make the migration from the drivers to the uniform watchdog device driver easier in the future. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/acquirewdt.c | 14 +++++----- drivers/watchdog/advantechwdt.c | 26 +++++++++---------- drivers/watchdog/alim1535_wdt.c | 6 ++--- drivers/watchdog/alim7101_wdt.c | 6 ++--- drivers/watchdog/ar7_wdt.c | 4 +-- drivers/watchdog/at32ap700x_wdt.c | 34 ++++++++++++------------ drivers/watchdog/at91rm9200_wdt.c | 28 ++++++++++---------- drivers/watchdog/bfin_wdt.c | 28 ++++++++++---------- drivers/watchdog/booke_wdt.c | 18 ++++++------- drivers/watchdog/cpu5wdt.c | 12 ++++----- drivers/watchdog/davinci_wdt.c | 8 +++--- drivers/watchdog/ep93xx_wdt.c | 10 ++++---- drivers/watchdog/eurotechwdt.c | 36 +++++++++++++------------- drivers/watchdog/geodewdt.c | 30 ++++++++++------------ drivers/watchdog/i6300esb.c | 8 +++--- drivers/watchdog/iTCO_wdt.c | 8 +++--- drivers/watchdog/ib700wdt.c | 30 +++++++++++----------- drivers/watchdog/ibmasr.c | 20 +++++++-------- drivers/watchdog/indydog.c | 10 ++++---- drivers/watchdog/iop_wdt.c | 18 ++++++------- drivers/watchdog/it8712f_wdt.c | 4 +-- drivers/watchdog/ixp2000_wdt.c | 10 ++++---- drivers/watchdog/ixp4xx_wdt.c | 10 ++++---- drivers/watchdog/ks8695_wdt.c | 28 ++++++++++---------- drivers/watchdog/mixcomwd.c | 8 +++--- drivers/watchdog/mpcore_wdt.c | 12 ++++----- drivers/watchdog/mtx-1_wdt.c | 12 ++++----- drivers/watchdog/omap_wdt.c | 4 +-- drivers/watchdog/pc87413_wdt.c | 30 +++++++++++----------- drivers/watchdog/pcwd.c | 6 ++--- drivers/watchdog/pcwd_pci.c | 8 +++--- drivers/watchdog/pcwd_usb.c | 8 +++--- drivers/watchdog/pnx4008_wdt.c | 10 ++++---- drivers/watchdog/s3c2410_wdt.c | 4 +-- drivers/watchdog/sa1100_wdt.c | 10 ++++---- drivers/watchdog/sb_wdog.c | 10 ++++---- drivers/watchdog/sbc60xxwdt.c | 10 ++++---- drivers/watchdog/sbc7240_wdt.c | 54 ++++++++++++++++++++------------------- drivers/watchdog/sbc_epx_c3.c | 10 ++++---- drivers/watchdog/sc1200wdt.c | 36 +++++++++++++------------- drivers/watchdog/sc520_wdt.c | 10 ++++---- drivers/watchdog/scx200_wdt.c | 4 +-- drivers/watchdog/shwdt.c | 28 ++++++++++---------- drivers/watchdog/smsc37b787_wdt.c | 34 ++++++++++++------------ drivers/watchdog/softdog.c | 4 +-- drivers/watchdog/txx9wdt.c | 4 +-- drivers/watchdog/w83627hf_wdt.c | 24 ++++++++--------- drivers/watchdog/w83697hf_wdt.c | 30 +++++++++++----------- drivers/watchdog/w83877f_wdt.c | 10 ++++---- drivers/watchdog/w83977f_wdt.c | 14 +++++----- drivers/watchdog/wafer5823wdt.c | 32 +++++++++++------------ drivers/watchdog/wdt.c | 4 +-- drivers/watchdog/wdt977.c | 14 +++++----- drivers/watchdog/wdt_pci.c | 6 ++--- 54 files changed, 428 insertions(+), 428 deletions(-) diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c index 340d1eeec16b..7a5c69421f12 100644 --- a/drivers/watchdog/acquirewdt.c +++ b/drivers/watchdog/acquirewdt.c @@ -164,13 +164,6 @@ static long acq_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - acq_keepalive(); - return 0; - - case WDIOC_GETTIMEOUT: - return put_user(WATCHDOG_HEARTBEAT, p); - case WDIOC_SETOPTIONS: { if (get_user(options, p)) @@ -185,6 +178,13 @@ static long acq_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + acq_keepalive(); + return 0; + + case WDIOC_GETTIMEOUT: + return put_user(WATCHDOG_HEARTBEAT, p); + default: return -ENOTTY; } diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c index e6bf8d2d3d30..bfec16600475 100644 --- a/drivers/watchdog/advantechwdt.c +++ b/drivers/watchdog/advantechwdt.c @@ -152,19 +152,6 @@ static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - advwdt_ping(); - break; - - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - if (advwdt_set_heartbeat(new_timeout)) - return -EINVAL; - advwdt_ping(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); case WDIOC_SETOPTIONS: { int options, retval = -EINVAL; @@ -181,6 +168,19 @@ static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + advwdt_ping(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + if (advwdt_set_heartbeat(new_timeout)) + return -EINVAL; + advwdt_ping(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); default: return -ENOTTY; } diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c index 80e323ddc4ba..dfa11d19043a 100644 --- a/drivers/watchdog/alim1535_wdt.c +++ b/drivers/watchdog/alim1535_wdt.c @@ -195,9 +195,6 @@ static long ali_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - ali_keepalive(); - return 0; case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -214,6 +211,9 @@ static long ali_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + ali_keepalive(); + return 0; case WDIOC_SETTIMEOUT: { int new_timeout; diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c index 726e75d9db7a..049c9122e40d 100644 --- a/drivers/watchdog/alim7101_wdt.c +++ b/drivers/watchdog/alim7101_wdt.c @@ -251,9 +251,6 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -270,6 +267,9 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; case WDIOC_SETTIMEOUT: { int new_timeout; diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c index ef7b0d67095e..9a81a205ef74 100644 --- a/drivers/watchdog/ar7_wdt.c +++ b/drivers/watchdog/ar7_wdt.c @@ -251,8 +251,6 @@ static long ar7_wdt_ioctl(struct file *file, int new_margin; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: if (copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident))) @@ -281,6 +279,8 @@ static long ar7_wdt_ioctl(struct file *file, if (put_user(margin, (int *)arg)) return -EFAULT; return 0; + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c index c5dc5e912fb2..4538b57f451a 100644 --- a/drivers/watchdog/at32ap700x_wdt.c +++ b/drivers/watchdog/at32ap700x_wdt.c @@ -221,27 +221,10 @@ static long at32_wdt_ioctl(struct file *file, int __user *p = argp; switch (cmd) { - case WDIOC_KEEPALIVE: - at32_wdt_pat(); - ret = 0; - break; case WDIOC_GETSUPPORT: ret = copy_to_user(argp, &at32_wdt_info, sizeof(at32_wdt_info)) ? -EFAULT : 0; break; - case WDIOC_SETTIMEOUT: - ret = get_user(time, p); - if (ret) - break; - ret = at32_wdt_settimeout(time); - if (ret) - break; - /* Enable new time value */ - at32_wdt_start(); - /* fall through */ - case WDIOC_GETTIMEOUT: - ret = put_user(wdt->timeout, p); - break; case WDIOC_GETSTATUS: ret = put_user(0, p); break; @@ -258,6 +241,23 @@ static long at32_wdt_ioctl(struct file *file, at32_wdt_start(); ret = 0; break; + case WDIOC_KEEPALIVE: + at32_wdt_pat(); + ret = 0; + break; + case WDIOC_SETTIMEOUT: + ret = get_user(time, p); + if (ret) + break; + ret = at32_wdt_settimeout(time); + if (ret) + break; + /* Enable new time value */ + at32_wdt_start(); + /* fall through */ + case WDIOC_GETTIMEOUT: + ret = put_user(wdt->timeout, p); + break; } return ret; diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index bb79f649dc7e..2313f44144f8 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -137,23 +137,9 @@ static long at91_wdt_ioct(struct file *file, int new_value; switch (cmd) { - case WDIOC_KEEPALIVE: - at91_wdt_reload(); /* pat the watchdog */ - return 0; case WDIOC_GETSUPPORT: return copy_to_user(argp, &at91_wdt_info, sizeof(at91_wdt_info)) ? -EFAULT : 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_value, p)) - return -EFAULT; - if (at91_wdt_settimeout(new_value)) - return -EINVAL; - /* Enable new time value */ - at91_wdt_start(); - /* Return current value */ - return put_user(wdt_time, p); - case WDIOC_GETTIMEOUT: - return put_user(wdt_time, p); case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); @@ -165,6 +151,20 @@ static long at91_wdt_ioct(struct file *file, if (new_value & WDIOS_ENABLECARD) at91_wdt_start(); return 0; + case WDIOC_KEEPALIVE: + at91_wdt_reload(); /* pat the watchdog */ + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + if (at91_wdt_settimeout(new_value)) + return -EINVAL; + /* Enable new time value */ + at91_wdt_start(); + /* Return current value */ + return put_user(wdt_time, p); + case WDIOC_GETTIMEOUT: + return put_user(wdt_time, p); default: return -ENOTTY; } diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index 8f6e871b3fe3..31b42253054e 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -265,20 +265,6 @@ static long bfin_wdt_ioctl(struct file *file, case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(!!(_bfin_swrst & SWRST_RESET_WDOG), p); - case WDIOC_KEEPALIVE: - bfin_wdt_keepalive(); - return 0; - case WDIOC_SETTIMEOUT: { - int new_timeout; - - if (get_user(new_timeout, p)) - return -EFAULT; - if (bfin_wdt_set_timeout(new_timeout)) - return -EINVAL; - } - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); case WDIOC_SETOPTIONS: { unsigned long flags; int options, ret = -EINVAL; @@ -298,6 +284,20 @@ static long bfin_wdt_ioctl(struct file *file, spin_unlock_irqrestore(&bfin_wdt_spinlock, flags); return ret; } + case WDIOC_KEEPALIVE: + bfin_wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: { + int new_timeout; + + if (get_user(new_timeout, p)) + return -EFAULT; + if (bfin_wdt_set_timeout(new_timeout)) + return -EINVAL; + } + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); default: return -ENOTTY; } diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index 06b7a17a60e7..c3b78a76f173 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -99,6 +99,15 @@ static long booke_wdt_ioctl(struct file *file, tmp = mfspr(SPRN_TSR) & TSR_WRS(3); /* returns 1 if last reset was caused by the WDT */ return (tmp ? 1 : 0); + case WDIOC_SETOPTIONS: + if (get_user(tmp, p)) + return -EINVAL; + if (tmp == WDIOS_ENABLECARD) { + booke_wdt_ping(); + break; + } else + return -EINVAL; + return 0; case WDIOC_KEEPALIVE: booke_wdt_ping(); return 0; @@ -110,15 +119,6 @@ static long booke_wdt_ioctl(struct file *file, return 0; case WDIOC_GETTIMEOUT: return put_user(booke_wdt_period, p); - case WDIOC_SETOPTIONS: - if (get_user(tmp, p)) - return -EINVAL; - if (tmp == WDIOS_ENABLECARD) { - booke_wdt_ping(); - break; - } else - return -EINVAL; - return 0; default: return -ENOTTY; } diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c index ec324e5e1c99..71f6d7eec9a8 100644 --- a/drivers/watchdog/cpu5wdt.c +++ b/drivers/watchdog/cpu5wdt.c @@ -160,8 +160,9 @@ static long cpu5wdt_ioctl(struct file *file, unsigned int cmd, }; switch (cmd) { - case WDIOC_KEEPALIVE: - cpu5wdt_reset(); + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; break; case WDIOC_GETSTATUS: value = inb(port + CPU5WDT_STATUS_REG); @@ -169,10 +170,6 @@ static long cpu5wdt_ioctl(struct file *file, unsigned int cmd, return put_user(value, p); case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof(ident))) - return -EFAULT; - break; case WDIOC_SETOPTIONS: if (get_user(value, p)) return -EFAULT; @@ -181,6 +178,9 @@ static long cpu5wdt_ioctl(struct file *file, unsigned int cmd, if (value & WDIOS_DISABLECARD) cpu5wdt_stop(); break; + case WDIOC_KEEPALIVE: + cpu5wdt_reset(); + break; default: return -ENOTTY; } diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c index 926b59c41186..802aeba347a0 100644 --- a/drivers/watchdog/davinci_wdt.c +++ b/drivers/watchdog/davinci_wdt.c @@ -159,14 +159,14 @@ static long davinci_wdt_ioctl(struct file *file, ret = put_user(0, (int *)arg); break; - case WDIOC_GETTIMEOUT: - ret = put_user(heartbeat, (int *)arg); - break; - case WDIOC_KEEPALIVE: wdt_service(); ret = 0; break; + + case WDIOC_GETTIMEOUT: + ret = put_user(heartbeat, (int *)arg); + break; } return ret; } diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c index cdcdd11173a7..07b74a768922 100644 --- a/drivers/watchdog/ep93xx_wdt.c +++ b/drivers/watchdog/ep93xx_wdt.c @@ -155,15 +155,15 @@ static long ep93xx_wdt_ioctl(struct file *file, ret = put_user(boot_status, (int __user *)arg); break; - case WDIOC_GETTIMEOUT: - /* actually, it is 0.250 seconds.... */ - ret = put_user(1, (int __user *)arg); - break; - case WDIOC_KEEPALIVE: wdt_keepalive(); ret = 0; break; + + case WDIOC_GETTIMEOUT: + /* actually, it is 0.250 seconds.... */ + ret = put_user(1, (int __user *)arg); + break; } return ret; } diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c index b94e6ef4c7a7..96250118fd7c 100644 --- a/drivers/watchdog/eurotechwdt.c +++ b/drivers/watchdog/eurotechwdt.c @@ -249,9 +249,6 @@ static long eurwdt_ioctl(struct file *file, int options, retval = -EINVAL; switch (cmd) { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; @@ -259,6 +256,22 @@ static long eurwdt_ioctl(struct file *file, case WDIOC_GETBOOTSTATUS: return put_user(0, p); + case WDIOC_SETOPTIONS: + if (get_user(options, p)) + return -EFAULT; + spin_lock(&eurwdt_lock); + if (options & WDIOS_DISABLECARD) { + eurwdt_disable_timer(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + eurwdt_activate_timer(); + eurwdt_ping(); + retval = 0; + } + spin_unlock(&eurwdt_lock); + return retval; + case WDIOC_KEEPALIVE: spin_lock(&eurwdt_lock); eurwdt_ping(); @@ -282,21 +295,8 @@ static long eurwdt_ioctl(struct file *file, case WDIOC_GETTIMEOUT: return put_user(eurwdt_timeout, p); - case WDIOC_SETOPTIONS: - if (get_user(options, p)) - return -EFAULT; - spin_lock(&eurwdt_lock); - if (options & WDIOS_DISABLECARD) { - eurwdt_disable_timer(); - retval = 0; - } - if (options & WDIOS_ENABLECARD) { - eurwdt_activate_timer(); - eurwdt_ping(); - retval = 0; - } - spin_unlock(&eurwdt_lock); - return retval; + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index 74c00698801d..04b861cfdf0c 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -159,22 +159,6 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - geodewdt_ping(); - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(interval, p)) - return -EFAULT; - - if (geodewdt_set_heartbeat(interval)) - return -EINVAL; - -/* Fall through */ - - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); - case WDIOC_SETOPTIONS: { int options, ret = -EINVAL; @@ -194,6 +178,20 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, return ret; } + case WDIOC_KEEPALIVE: + geodewdt_ping(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(interval, p)) + return -EFAULT; + + if (geodewdt_set_heartbeat(interval)) + return -EINVAL; + /* Fall through */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: return -ENOTTY; } diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c index 01a283f7a271..c768cb718904 100644 --- a/drivers/watchdog/i6300esb.c +++ b/drivers/watchdog/i6300esb.c @@ -280,10 +280,6 @@ static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETBOOTSTATUS: return put_user(triggered, p); - case WDIOC_KEEPALIVE: - esb_timer_keepalive(); - return 0; - case WDIOC_SETOPTIONS: { if (get_user(new_options, p)) @@ -301,6 +297,10 @@ static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + esb_timer_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: { if (get_user(new_heartbeat, p)) diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index c9ca8f691d81..b18766436638 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -532,10 +532,6 @@ static long iTCO_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - iTCO_wdt_keepalive(); - return 0; - case WDIOC_SETOPTIONS: { if (get_user(new_options, p)) @@ -552,6 +548,10 @@ static long iTCO_wdt_ioctl(struct file *file, unsigned int cmd, } return retval; } + case WDIOC_KEEPALIVE: + iTCO_wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: { if (get_user(new_heartbeat, p)) diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c index 9eb9537c370e..6aa914e5caf5 100644 --- a/drivers/watchdog/ib700wdt.c +++ b/drivers/watchdog/ib700wdt.c @@ -213,21 +213,6 @@ static long ibwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - ibwdt_ping(); - break; - - case WDIOC_SETTIMEOUT: - if (get_user(new_margin, p)) - return -EFAULT; - if (ibwdt_set_heartbeat(new_margin)) - return -EINVAL; - ibwdt_ping(); - /* Fall */ - - case WDIOC_GETTIMEOUT: - return put_user(wd_times[wd_margin], p); - case WDIOC_SETOPTIONS: { int options, retval = -EINVAL; @@ -245,6 +230,21 @@ static long ibwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + ibwdt_ping(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_margin, p)) + return -EFAULT; + if (ibwdt_set_heartbeat(new_margin)) + return -EINVAL; + ibwdt_ping(); + /* Fall */ + + case WDIOC_GETTIMEOUT: + return put_user(wd_times[wd_margin], p); + default: return -ENOTTY; } diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c index 6824bf80b37e..0b549f3ff915 100644 --- a/drivers/watchdog/ibmasr.c +++ b/drivers/watchdog/ibmasr.c @@ -287,16 +287,6 @@ static long asr_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - asr_toggle(); - return 0; - /* - * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT - * and WDIOC_GETTIMEOUT always returns 256. - */ - case WDIOC_GETTIMEOUT: - heartbeat = 256; - return put_user(heartbeat, p); case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -313,6 +303,16 @@ static long asr_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + asr_toggle(); + return 0; + /* + * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT + * and WDIOC_GETTIMEOUT always returns 256. + */ + case WDIOC_GETTIMEOUT: + heartbeat = 256; + return put_user(heartbeat, p); default: return -ENOTTY; } diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c index 0bffea37404e..73c9e7992feb 100644 --- a/drivers/watchdog/indydog.c +++ b/drivers/watchdog/indydog.c @@ -128,11 +128,6 @@ static long indydog_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, (int *)arg); - case WDIOC_KEEPALIVE: - indydog_ping(); - return 0; - case WDIOC_GETTIMEOUT: - return put_user(WATCHDOG_TIMEOUT, (int *)arg); case WDIOC_SETOPTIONS: { if (get_user(options, (int *)arg)) @@ -147,6 +142,11 @@ static long indydog_ioctl(struct file *file, unsigned int cmd, } return retval; } + case WDIOC_KEEPALIVE: + indydog_ping(); + return 0; + case WDIOC_GETTIMEOUT: + return put_user(WATCHDOG_TIMEOUT, (int *)arg); default: return -ENOTTY; } diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c index e54c888d2afe..e0d0a90ea10c 100644 --- a/drivers/watchdog/iop_wdt.c +++ b/drivers/watchdog/iop_wdt.c @@ -153,15 +153,6 @@ static long iop_wdt_ioctl(struct file *file, ret = put_user(boot_status, argp); break; - case WDIOC_GETTIMEOUT: - ret = put_user(iop_watchdog_timeout(), argp); - break; - - case WDIOC_KEEPALIVE: - wdt_enable(); - ret = 0; - break; - case WDIOC_SETOPTIONS: if (get_user(options, (int *)arg)) return -EFAULT; @@ -181,6 +172,15 @@ static long iop_wdt_ioctl(struct file *file, ret = 0; } break; + + case WDIOC_KEEPALIVE: + wdt_enable(); + ret = 0; + break; + + case WDIOC_GETTIMEOUT: + ret = put_user(iop_watchdog_timeout(), argp); + break; } return ret; } diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c index 51bfd5721833..c1db74f6e310 100644 --- a/drivers/watchdog/it8712f_wdt.c +++ b/drivers/watchdog/it8712f_wdt.c @@ -244,8 +244,6 @@ static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd, int value; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: if (copy_to_user(argp, &ident, sizeof(ident))) return -EFAULT; @@ -284,6 +282,8 @@ static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd, if (put_user(margin, p)) return -EFAULT; return 0; + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/ixp2000_wdt.c b/drivers/watchdog/ixp2000_wdt.c index 943ceffbd683..a77f69d52877 100644 --- a/drivers/watchdog/ixp2000_wdt.c +++ b/drivers/watchdog/ixp2000_wdt.c @@ -126,6 +126,11 @@ static long ixp2000_wdt_ioctl(struct file *file, unsigned int cmd, ret = put_user(0, (int *)arg); break; + case WDIOC_KEEPALIVE: + wdt_enable(); + ret = 0; + break; + case WDIOC_SETTIMEOUT: ret = get_user(time, (int *)arg); if (ret) @@ -143,11 +148,6 @@ static long ixp2000_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETTIMEOUT: ret = put_user(heartbeat, (int *)arg); break; - - case WDIOC_KEEPALIVE: - wdt_enable(); - ret = 0; - break; } return ret; diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c index 1bafd7b58ca5..b94713e4773d 100644 --- a/drivers/watchdog/ixp4xx_wdt.c +++ b/drivers/watchdog/ixp4xx_wdt.c @@ -117,6 +117,11 @@ static long ixp4xx_wdt_ioctl(struct file *file, unsigned int cmd, ret = put_user(boot_status, (int *)arg); break; + case WDIOC_KEEPALIVE: + wdt_enable(); + ret = 0; + break; + case WDIOC_SETTIMEOUT: ret = get_user(time, (int *)arg); if (ret) @@ -134,11 +139,6 @@ static long ixp4xx_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETTIMEOUT: ret = put_user(heartbeat, (int *)arg); break; - - case WDIOC_KEEPALIVE: - wdt_enable(); - ret = 0; - break; } return ret; } diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c index 6d052b80aa20..f8566d5c62fe 100644 --- a/drivers/watchdog/ks8695_wdt.c +++ b/drivers/watchdog/ks8695_wdt.c @@ -161,23 +161,9 @@ static long ks8695_wdt_ioctl(struct file *file, unsigned int cmd, int new_value; switch (cmd) { - case WDIOC_KEEPALIVE: - ks8695_wdt_reload(); /* pat the watchdog */ - return 0; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ks8695_wdt_info, sizeof(ks8695_wdt_info)) ? -EFAULT : 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_value, p)) - return -EFAULT; - if (ks8695_wdt_settimeout(new_value)) - return -EINVAL; - /* Enable new time value */ - ks8695_wdt_start(); - /* Return current value */ - return put_user(wdt_time, p); - case WDIOC_GETTIMEOUT: - return put_user(wdt_time, p); case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); @@ -189,6 +175,20 @@ static long ks8695_wdt_ioctl(struct file *file, unsigned int cmd, if (new_value & WDIOS_ENABLECARD) ks8695_wdt_start(); return 0; + case WDIOC_KEEPALIVE: + ks8695_wdt_reload(); /* pat the watchdog */ + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + if (ks8695_wdt_settimeout(new_value)) + return -EINVAL; + /* Enable new time value */ + ks8695_wdt_start(); + /* Return current value */ + return put_user(wdt_time, p); + case WDIOC_GETTIMEOUT: + return put_user(wdt_time, p); default: return -ENOTTY; } diff --git a/drivers/watchdog/mixcomwd.c b/drivers/watchdog/mixcomwd.c index 2248a8187590..407b025cb104 100644 --- a/drivers/watchdog/mixcomwd.c +++ b/drivers/watchdog/mixcomwd.c @@ -208,6 +208,10 @@ static long mixcomwd_ioctl(struct file *file, }; switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; case WDIOC_GETSTATUS: status = mixcomwd_opened; if (!nowayout) @@ -215,10 +219,6 @@ static long mixcomwd_ioctl(struct file *file, return put_user(status, p); case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof(ident))) - return -EFAULT; - break; case WDIOC_KEEPALIVE: mixcomwd_ping(); break; diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c index 5e58f8b73d00..3c4f95599c65 100644 --- a/drivers/watchdog/mpcore_wdt.c +++ b/drivers/watchdog/mpcore_wdt.c @@ -243,6 +243,12 @@ static long mpcore_wdt_ioctl(struct file *file, unsigned int cmd, ret = 0; break; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + uarg.i = 0; + ret = 0; + break; + case WDIOC_SETOPTIONS: ret = -EINVAL; if (uarg.i & WDIOS_DISABLECARD) { @@ -255,12 +261,6 @@ static long mpcore_wdt_ioctl(struct file *file, unsigned int cmd, } break; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - uarg.i = 0; - ret = 0; - break; - case WDIOC_KEEPALIVE: mpcore_wdt_keepalive(wdt); ret = 0; diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index e0b8cdfa5e70..f820b82da7c3 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -148,17 +148,14 @@ static long mtx1_wdt_ioctl(struct file *file, unsigned int cmd, }; switch (cmd) { - case WDIOC_KEEPALIVE: - mtx1_wdt_reset(); + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; break; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: put_user(0, p); break; - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof(ident))) - return -EFAULT; - break; case WDIOC_SETOPTIONS: if (get_user(value, p)) return -EFAULT; @@ -169,6 +166,9 @@ static long mtx1_wdt_ioctl(struct file *file, unsigned int cmd, else return -EINVAL; return 0; + case WDIOC_KEEPALIVE: + mtx1_wdt_reset(); + break; default: return -ENOTTY; } diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 5aae071cc045..7beb21ce1de9 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -197,8 +197,6 @@ static long omap_wdt_ioctl(struct file *file, unsigned int cmd, }; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)); @@ -231,6 +229,8 @@ static long omap_wdt_ioctl(struct file *file, unsigned int cmd, /* Fall */ case WDIOC_GETTIMEOUT: return put_user(timer_margin, (int __user *)arg); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c index 326f2d2ded3b..5fc7f1349950 100644 --- a/drivers/watchdog/pc87413_wdt.c +++ b/drivers/watchdog/pc87413_wdt.c @@ -426,6 +426,21 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd, return put_user(pc87413_status(), uarg.i); case WDIOC_GETBOOTSTATUS: return put_user(0, uarg.i); + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + if (get_user(options, uarg.i)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + pc87413_disable(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + pc87413_enable(); + retval = 0; + } + return retval; + } case WDIOC_KEEPALIVE: pc87413_refresh(); #ifdef DEBUG @@ -445,21 +460,6 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETTIMEOUT: new_timeout = timeout * 60; return put_user(new_timeout, uarg.i); - case WDIOC_SETOPTIONS: - { - int options, retval = -EINVAL; - if (get_user(options, uarg.i)) - return -EFAULT; - if (options & WDIOS_DISABLECARD) { - pc87413_disable(); - retval = 0; - } - if (options & WDIOS_ENABLECARD) { - pc87413_enable(); - retval = 0; - } - return retval; - } default: return -ENOTTY; } diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c index e1259adf09f9..134386a88852 100644 --- a/drivers/watchdog/pcwd.c +++ b/drivers/watchdog/pcwd.c @@ -612,9 +612,6 @@ static long pcwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) }; switch (cmd) { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: if (copy_to_user(argp, &ident, sizeof(ident))) return -EFAULT; @@ -669,6 +666,9 @@ static long pcwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETTIMEOUT: return put_user(heartbeat, argp); + + default: + return -ENOTTY; } return 0; diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c index 7f500ee4ee8a..2617129a7ccc 100644 --- a/drivers/watchdog/pcwd_pci.c +++ b/drivers/watchdog/pcwd_pci.c @@ -494,10 +494,6 @@ static long pcipcwd_ioctl(struct file *file, unsigned int cmd, return put_user(temperature, p); } - case WDIOC_KEEPALIVE: - pcipcwd_keepalive(); - return 0; - case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -525,6 +521,10 @@ static long pcipcwd_ioctl(struct file *file, unsigned int cmd, return retval; } + case WDIOC_KEEPALIVE: + pcipcwd_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: { int new_heartbeat; diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index 8194435052c8..8c582bc0588e 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -400,10 +400,6 @@ static long usb_pcwd_ioctl(struct file *file, unsigned int cmd, return put_user(temperature, p); } - case WDIOC_KEEPALIVE: - usb_pcwd_keepalive(usb_pcwd_device); - return 0; - case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -424,6 +420,10 @@ static long usb_pcwd_ioctl(struct file *file, unsigned int cmd, return retval; } + case WDIOC_KEEPALIVE: + usb_pcwd_keepalive(usb_pcwd_device); + return 0; + case WDIOC_SETTIMEOUT: { int new_heartbeat; diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 56dee3bfd4aa..6eadf5ebb9b3 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -194,6 +194,11 @@ static long pnx4008_wdt_ioctl(struct inode *inode, struct file *file, ret = put_user(boot_status, (int *)arg); break; + case WDIOC_KEEPALIVE: + wdt_enable(); + ret = 0; + break; + case WDIOC_SETTIMEOUT: ret = get_user(time, (int *)arg); if (ret) @@ -211,11 +216,6 @@ static long pnx4008_wdt_ioctl(struct inode *inode, struct file *file, case WDIOC_GETTIMEOUT: ret = put_user(heartbeat, (int *)arg); break; - - case WDIOC_KEEPALIVE: - wdt_enable(); - ret = 0; - break; } return ret; } diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 97b4a2e8eb09..44bf5e4282e1 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -305,8 +305,6 @@ static long s3c2410wdt_ioctl(struct file *file, unsigned int cmd, int new_margin; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &s3c2410_wdt_ident, sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0; @@ -325,6 +323,8 @@ static long s3c2410wdt_ioctl(struct file *file, unsigned int cmd, return put_user(tmr_margin, p); case WDIOC_GETTIMEOUT: return put_user(tmr_margin, p); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index 869d538c02f9..27d6898a7c98 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -107,6 +107,11 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd, ret = put_user(boot_status, p); break; + case WDIOC_KEEPALIVE: + OSMR3 = OSCR + pre_margin; + ret = 0; + break; + case WDIOC_SETTIMEOUT: ret = get_user(time, p); if (ret) @@ -124,11 +129,6 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETTIMEOUT: ret = put_user(pre_margin / OSCR_FREQ, p); break; - - case WDIOC_KEEPALIVE: - OSMR3 = OSCR + pre_margin; - ret = 0; - break; } return ret; } diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c index c8b544ce77fb..528097651f7f 100644 --- a/drivers/watchdog/sb_wdog.c +++ b/drivers/watchdog/sb_wdog.c @@ -182,6 +182,11 @@ static long sbwdog_ioctl(struct file *file, unsigned int cmd, ret = put_user(0, p); break; + case WDIOC_KEEPALIVE: + sbwdog_pet(user_dog); + ret = 0; + break; + case WDIOC_SETTIMEOUT: ret = get_user(time, p); if (ret) @@ -203,11 +208,6 @@ static long sbwdog_ioctl(struct file *file, unsigned int cmd, */ ret = put_user(__raw_readq(user_dog - 8) / 1000000, p); break; - - case WDIOC_KEEPALIVE: - sbwdog_pet(user_dog); - ret = 0; - break; } return ret; } diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c index e284a5d4fb1b..e801cd46c647 100644 --- a/drivers/watchdog/sbc60xxwdt.c +++ b/drivers/watchdog/sbc60xxwdt.c @@ -237,16 +237,11 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) }; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident))? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -262,6 +257,9 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; case WDIOC_SETTIMEOUT: { int new_timeout; @@ -277,6 +275,8 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } case WDIOC_GETTIMEOUT: return put_user(timeout, p); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/sbc7240_wdt.c b/drivers/watchdog/sbc7240_wdt.c index abccbe265249..67ddeb1c830a 100644 --- a/drivers/watchdog/sbc7240_wdt.c +++ b/drivers/watchdog/sbc7240_wdt.c @@ -177,39 +177,41 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, (int __user *)arg); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; - case WDIOC_SETOPTIONS:{ - int options; - int retval = -EINVAL; + case WDIOC_SETOPTIONS: + { + int options; + int retval = -EINVAL; - if (get_user(options, (int __user *)arg)) - return -EFAULT; + if (get_user(options, (int __user *)arg)) + return -EFAULT; - if (options & WDIOS_DISABLECARD) { - wdt_disable(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) { - wdt_enable(); - retval = 0; - } + if (options & WDIOS_DISABLECARD) { + wdt_disable(); + retval = 0; + } - return retval; + if (options & WDIOS_ENABLECARD) { + wdt_enable(); + retval = 0; } - case WDIOC_SETTIMEOUT:{ - int new_timeout; - if (get_user(new_timeout, (int __user *)arg)) - return -EFAULT; + return retval; + } + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + { + int new_timeout; - if (wdt_set_timeout(new_timeout)) - return -EINVAL; + if (get_user(new_timeout, (int __user *)arg)) + return -EFAULT; - /* Fall through */ - } + if (wdt_set_timeout(new_timeout)) + return -EINVAL; + + /* Fall through */ + } case WDIOC_GETTIMEOUT: return put_user(timeout, (int __user *)arg); default: diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c index 70ff9cbc8e9b..e5e470ca7759 100644 --- a/drivers/watchdog/sbc_epx_c3.c +++ b/drivers/watchdog/sbc_epx_c3.c @@ -120,11 +120,6 @@ static long epx_c3_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, argp); - case WDIOC_KEEPALIVE: - epx_c3_pet(); - return 0; - case WDIOC_GETTIMEOUT: - return put_user(WATCHDOG_TIMEOUT, argp); case WDIOC_SETOPTIONS: if (get_user(options, argp)) return -EFAULT; @@ -140,6 +135,11 @@ static long epx_c3_ioctl(struct file *file, unsigned int cmd, } return retval; + case WDIOC_KEEPALIVE: + epx_c3_pet(); + return 0; + case WDIOC_GETTIMEOUT: + return put_user(WATCHDOG_TIMEOUT, argp); default: return -ENOTTY; } diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index 03e67fa4d689..f3bdc8227cc4 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -207,24 +207,6 @@ static long sc1200wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - sc1200wdt_write_data(WDTO, timeout); - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - /* the API states this is given in secs */ - new_timeout /= 60; - if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) - return -EINVAL; - timeout = new_timeout; - sc1200wdt_write_data(WDTO, timeout); - /* fall through and return the new timeout */ - - case WDIOC_GETTIMEOUT: - return put_user(timeout * 60, p); - case WDIOC_SETOPTIONS: { int options, retval = -EINVAL; @@ -244,6 +226,24 @@ static long sc1200wdt_ioctl(struct file *file, unsigned int cmd, return retval; } + case WDIOC_KEEPALIVE: + sc1200wdt_write_data(WDTO, timeout); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + /* the API states this is given in secs */ + new_timeout /= 60; + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + timeout = new_timeout; + sc1200wdt_write_data(WDTO, timeout); + /* fall through and return the new timeout */ + + case WDIOC_GETTIMEOUT: + return put_user(timeout * 60, p); + default: return -ENOTTY; } diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c index 1d5ba15dec63..a2b6c1067ec5 100644 --- a/drivers/watchdog/sc520_wdt.c +++ b/drivers/watchdog/sc520_wdt.c @@ -291,16 +291,11 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) }; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -320,6 +315,9 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return retval; } + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; case WDIOC_SETTIMEOUT: { int new_timeout; @@ -335,6 +333,8 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } case WDIOC_GETTIMEOUT: return put_user(timeout, p); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/scx200_wdt.c b/drivers/watchdog/scx200_wdt.c index 7c1de94704f3..fd5c09446bce 100644 --- a/drivers/watchdog/scx200_wdt.c +++ b/drivers/watchdog/scx200_wdt.c @@ -168,8 +168,6 @@ static long scx200_wdt_ioctl(struct file *file, unsigned int cmd, int new_margin; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: if (copy_to_user(argp, &ident, sizeof(ident))) return -EFAULT; @@ -194,6 +192,8 @@ static long scx200_wdt_ioctl(struct file *file, unsigned int cmd, if (put_user(margin, p)) return -EFAULT; return 0; + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c index 60f0036aaca6..824125adf90a 100644 --- a/drivers/watchdog/shwdt.c +++ b/drivers/watchdog/shwdt.c @@ -351,20 +351,6 @@ static long sh_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, (int *)arg); - case WDIOC_KEEPALIVE: - sh_wdt_keepalive(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_heartbeat, (int *)arg)) - return -EFAULT; - - if (sh_wdt_set_heartbeat(new_heartbeat)) - return -EINVAL; - - sh_wdt_keepalive(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, (int *)arg); case WDIOC_SETOPTIONS: if (get_user(options, (int *)arg)) return -EFAULT; @@ -380,6 +366,20 @@ static long sh_wdt_ioctl(struct file *file, unsigned int cmd, } return retval; + case WDIOC_KEEPALIVE: + sh_wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, (int *)arg)) + return -EFAULT; + + if (sh_wdt_set_heartbeat(new_heartbeat)) + return -EINVAL; + + sh_wdt_keepalive(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, (int *)arg); default: return -ENOTTY; } diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c index b7c6394b7d70..239383da6d87 100644 --- a/drivers/watchdog/smsc37b787_wdt.c +++ b/drivers/watchdog/smsc37b787_wdt.c @@ -451,6 +451,23 @@ static long wb_smsc_wdt_ioctl(struct file *file, return put_user(wb_smsc_wdt_status(), uarg.i); case WDIOC_GETBOOTSTATUS: return put_user(0, uarg.i); + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, uarg.i)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + wb_smsc_wdt_disable(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + wb_smsc_wdt_enable(); + retval = 0; + } + return retval; + } case WDIOC_KEEPALIVE: wb_smsc_wdt_reset_timer(); return 0; @@ -470,23 +487,6 @@ static long wb_smsc_wdt_ioctl(struct file *file, if (unit == UNIT_MINUTE) new_timeout *= 60; return put_user(new_timeout, uarg.i); - case WDIOC_SETOPTIONS: - { - int options, retval = -EINVAL; - - if (get_user(options, uarg.i)) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) { - wb_smsc_wdt_disable(); - retval = 0; - } - if (options & WDIOS_ENABLECARD) { - wb_smsc_wdt_enable(); - retval = 0; - } - return retval; - } default: return -ENOTTY; } diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c index bb3c75eed9df..c650464c5c63 100644 --- a/drivers/watchdog/softdog.c +++ b/drivers/watchdog/softdog.c @@ -206,8 +206,6 @@ static long softdog_ioctl(struct file *file, unsigned int cmd, .identity = "Software Watchdog", }; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: @@ -225,6 +223,8 @@ static long softdog_ioctl(struct file *file, unsigned int cmd, /* Fall */ case WDIOC_GETTIMEOUT: return put_user(soft_margin, p); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c index b729cc447df3..8382f9a9534b 100644 --- a/drivers/watchdog/txx9wdt.c +++ b/drivers/watchdog/txx9wdt.c @@ -142,8 +142,6 @@ static long txx9wdt_ioctl(struct file *file, unsigned int cmd, }; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: @@ -163,6 +161,8 @@ static long txx9wdt_ioctl(struct file *file, unsigned int cmd, /* Fall */ case WDIOC_GETTIMEOUT: return put_user(timeout, p); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c index 70c843f4201a..59507f609996 100644 --- a/drivers/watchdog/w83627hf_wdt.c +++ b/drivers/watchdog/w83627hf_wdt.c @@ -211,18 +211,6 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_ping(); - break; - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - if (wdt_set_heartbeat(new_timeout)) - return -EINVAL; - wdt_ping(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); case WDIOC_SETOPTIONS: { int options, retval = -EINVAL; @@ -239,6 +227,18 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + wdt_ping(); + break; + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + if (wdt_set_heartbeat(new_timeout)) + return -EINVAL; + wdt_ping(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); default: return -ENOTTY; } diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index 06ddd38675bd..12bd6618ed5e 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -251,21 +251,6 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_ping(); - break; - - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - if (wdt_set_heartbeat(new_timeout)) - return -EINVAL; - wdt_ping(); - /* Fall */ - - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); - case WDIOC_SETOPTIONS: { int options, retval = -EINVAL; @@ -286,6 +271,21 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return retval; } + case WDIOC_KEEPALIVE: + wdt_ping(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + if (wdt_set_heartbeat(new_timeout)) + return -EINVAL; + wdt_ping(); + /* Fall */ + + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: return -ENOTTY; } diff --git a/drivers/watchdog/w83877f_wdt.c b/drivers/watchdog/w83877f_wdt.c index 75b546d7d8c2..24587d2060c4 100644 --- a/drivers/watchdog/w83877f_wdt.c +++ b/drivers/watchdog/w83877f_wdt.c @@ -254,16 +254,11 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) }; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -283,6 +278,9 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return retval; } + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; case WDIOC_SETTIMEOUT: { int new_timeout; @@ -300,6 +298,8 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } case WDIOC_GETTIMEOUT: return put_user(timeout, p); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c index 6860a13f5bb9..2525da5080ca 100644 --- a/drivers/watchdog/w83977f_wdt.c +++ b/drivers/watchdog/w83977f_wdt.c @@ -390,9 +390,6 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) uarg.i = (int __user *)arg; switch (cmd) { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: return copy_to_user(uarg.ident, &ident, sizeof(ident)) ? -EFAULT : 0; @@ -404,10 +401,6 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETBOOTSTATUS: return put_user(0, uarg.i); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; - case WDIOC_SETOPTIONS: if (get_user(new_options, uarg.i)) return -EFAULT; @@ -424,6 +417,10 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return retval; + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: if (get_user(new_timeout, uarg.i)) return -EFAULT; @@ -437,6 +434,9 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETTIMEOUT: return put_user(timeout, uarg.i); + default: + return -ENOTTY; + } } diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c index 886cbbcf3eed..44e81f7d4322 100644 --- a/drivers/watchdog/wafer5823wdt.c +++ b/drivers/watchdog/wafer5823wdt.c @@ -145,22 +145,6 @@ static long wafwdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - wafwdt_ping(); - break; - - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - if ((new_timeout < 1) || (new_timeout > 255)) - return -EINVAL; - timeout = new_timeout; - wafwdt_stop(); - wafwdt_start(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); - case WDIOC_SETOPTIONS: { int options, retval = -EINVAL; @@ -181,6 +165,22 @@ static long wafwdt_ioctl(struct file *file, unsigned int cmd, return retval; } + case WDIOC_KEEPALIVE: + wafwdt_ping(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + if ((new_timeout < 1) || (new_timeout > 255)) + return -EINVAL; + timeout = new_timeout; + wafwdt_stop(); + wafwdt_start(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: return -ENOTTY; } diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c index 53a6b18bcb9a..deeebb2b13ea 100644 --- a/drivers/watchdog/wdt.c +++ b/drivers/watchdog/wdt.c @@ -373,8 +373,6 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) #endif /* CONFIG_WDT_501 */ switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: @@ -394,6 +392,8 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) /* Fall */ case WDIOC_GETTIMEOUT: return put_user(heartbeat, p); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c index bdc28e522f03..60e28d49ff52 100644 --- a/drivers/watchdog/wdt977.c +++ b/drivers/watchdog/wdt977.c @@ -365,9 +365,6 @@ static long wdt977_ioctl(struct file *file, unsigned int cmd, uarg.i = (int __user *)arg; switch (cmd) { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: return copy_to_user(uarg.ident, &ident, sizeof(ident)) ? -EFAULT : 0; @@ -379,10 +376,6 @@ static long wdt977_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETBOOTSTATUS: return put_user(0, uarg.i); - case WDIOC_KEEPALIVE: - wdt977_keepalive(); - return 0; - case WDIOC_SETOPTIONS: if (get_user(new_options, uarg.i)) return -EFAULT; @@ -399,6 +392,10 @@ static long wdt977_ioctl(struct file *file, unsigned int cmd, return retval; + case WDIOC_KEEPALIVE: + wdt977_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: if (get_user(new_timeout, uarg.i)) return -EFAULT; @@ -412,6 +409,9 @@ static long wdt977_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETTIMEOUT: return put_user(timeout, uarg.i); + default: + return -ENOTTY; + } } diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c index 5d922fd6eafc..fb8fc0144852 100644 --- a/drivers/watchdog/wdt_pci.c +++ b/drivers/watchdog/wdt_pci.c @@ -428,8 +428,6 @@ static long wdtpci_ioctl(struct file *file, unsigned int cmd, #endif /* CONFIG_WDT_501_PCI */ switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: @@ -449,7 +447,9 @@ static long wdtpci_ioctl(struct file *file, unsigned int cmd, /* Fall */ case WDIOC_GETTIMEOUT: return put_user(heartbeat, p); - } + default: + return -ENOTTY; + } } /** -- cgit v1.2.3 From 12b7a1523eda9cd72362fdda928ddb995ecdc06d Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Fri, 18 Jul 2008 19:59:48 +0000 Subject: [WATCHDOG] sbc8360.c - move stop code into a function Move the sbc8360.c watchdog stop code into a seperate function. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sbc8360.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c index c66fa6694fc3..fd83dd052d8c 100644 --- a/drivers/watchdog/sbc8360.c +++ b/drivers/watchdog/sbc8360.c @@ -231,6 +231,13 @@ static void sbc8360_ping(void) outb(wd_margin, SBC8360_BASETIME); } +/* stop watchdog */ +static void sbc8360_stop(void) +{ + /* De-activate the watchdog */ + outb(0, SBC8360_ENABLE); +} + /* Userspace pings kernel driver, or requests clean close */ static ssize_t sbc8360_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) @@ -271,7 +278,7 @@ static int sbc8360_open(struct inode *inode, struct file *file) static int sbc8360_close(struct inode *inode, struct file *file) { if (expect_close == 42) - outb(0, SBC8360_ENABLE); + sbc8360_stop(); else printk(KERN_CRIT PFX "SBC8360 device closed unexpectedly. SBC8360 will not stop!\n"); @@ -288,10 +295,9 @@ static int sbc8360_close(struct inode *inode, struct file *file) static int sbc8360_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code == SYS_DOWN || code == SYS_HALT) { - /* Disable the SBC8360 Watchdog */ - outb(0, SBC8360_ENABLE); - } + if (code == SYS_DOWN || code == SYS_HALT) + sbc8360_stop(); /* Disable the SBC8360 Watchdog */ + return NOTIFY_DONE; } -- cgit v1.2.3 From 3a35c27ac68cea19c252e127ec61099648eb4870 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 6 Aug 2008 10:08:56 -0700 Subject: docbook: fix v4l fatal filename error docproc: /var/linsrc/lin2627-rc2/drivers/media/video/videodev.c: No such file or directory make[1]: *** [Documentation/DocBook/videobook.xml] Error 1 Signed-off-by: Randy Dunlap cc: mchehab@infradead.org Signed-off-by: Linus Torvalds --- Documentation/DocBook/videobook.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/videobook.tmpl b/Documentation/DocBook/videobook.tmpl index 89817795e668..0bc25949b668 100644 --- a/Documentation/DocBook/videobook.tmpl +++ b/Documentation/DocBook/videobook.tmpl @@ -1648,7 +1648,7 @@ static struct video_buffer capture_fb; Public Functions Provided -!Edrivers/media/video/videodev.c +!Edrivers/media/video/v4l2-dev.c -- cgit v1.2.3 From 8bc5fb6abb670fa9079cd1994f016a39f99698fe Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 6 Aug 2008 14:06:29 +0100 Subject: Remove bogons from the iSeries console The iSeries driver calls into the n_tty ldisc code directly for some bizarre reason. I previously tagged this with a query but this actually does need fixing as n_tty methods when you have a different ldisc set are not a good thing to call. In n_tty mode this change should have no effect, the core tty layer has always called the ldisc ioctl method *anyway* and will call the one for the right ldisc. Signed-off-by: Alan Cox Acked-by: Stephen Rothwell Signed-off-by: Linus Torvalds --- drivers/char/viocons.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/char/viocons.c b/drivers/char/viocons.c index 65fb848e1cce..f48892ba12f5 100644 --- a/drivers/char/viocons.c +++ b/drivers/char/viocons.c @@ -705,10 +705,6 @@ static int viotty_ioctl(struct tty_struct *tty, struct file *file, case KDSKBLED: return 0; } - /* FIXME: WTF is this being called for ??? */ - lock_kernel(); - ret = n_tty_ioctl(tty, file, cmd, arg); - unlock_kernel(); return ret; } -- cgit v1.2.3 From 8e4ae1017a555662d698ea4616dcfe71b17d3732 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Wed, 6 Aug 2008 14:28:43 -0400 Subject: Input: i8042 - Add Dritek quirk for Acer TravelMate 4280 Reported-by: Mattias Jernberg Signed-off-by: Carlos Corbacho Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index fe732a574ec2..3282b741e246 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -394,6 +394,13 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"), }, }, + { + .ident = "Acer TravelMate 4280", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4280"), + }, + }, { } }; -- cgit v1.2.3 From d6606683a5e3dac35cb979c7195f54ed827567bd Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 6 Aug 2008 12:04:54 -0700 Subject: Revert duplicate "mm/hugetlb.c must #include " This reverts commit 7cb93181629c613ee2b8f4ffe3446f8003074842, since we did that patch twice, and the problem was already fixed earlier by 78a34ae29bf1c9df62a5bd0f0798b6c62a54d520. Reported-by: Andi Kleen Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 28a2980ee435..757ca983fd99 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -17,7 +17,7 @@ #include #include #include -#include + #include #include #include -- cgit v1.2.3 From 7a48bdd01b5cab9c043b4d42a3f377624d6259f2 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Wed, 6 Aug 2008 21:56:53 +0200 Subject: kbuild: fix O=.. build with arm With a make O=... build kbuild would only create the include2/asm symlink for archs that not yet had moved headers to include/$ARCH/include There is no longer any reason to avoid the symlink for archs that has moved their headers so create it unconditionally. This fixes arm because kbuild checked for include/asm-$ARCH/errno.h and that file was not present for arm but the platform files are not yet moved. Signed-off-by: Sam Ravnborg Cc: Russell King --- Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Makefile b/Makefile index ea413fa03e4e..343ec4774b55 100644 --- a/Makefile +++ b/Makefile @@ -929,10 +929,10 @@ ifneq ($(KBUILD_SRC),) echo " in the '$(srctree)' directory.";\ /bin/false; \ fi; - $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi; - $(Q)if [ -e $(srctree)/include/asm-$(SRCARCH)/errno.h ]; then \ + $(Q)if [ ! -d include2 ]; then \ + mkdir -p include2; \ ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \ - fi + fi endif # prepare2 creates a makefile if using a separate output directory -- cgit v1.2.3 From 0758416325dc75e203ab974aa5e937bef7d2afef Mon Sep 17 00:00:00 2001 From: Erkki Lintunen Date: Wed, 6 Aug 2008 22:11:33 +0200 Subject: bugfix for scripts/patch-kernel in 2.6 sublevel stepping scripts/patch-kernel script can't patch a tree, say, from 2.6.25 to 2.6.26.1, because of a wrong comparison in context of patching 2.6.x base. Fix it. Acked-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg --- scripts/patch-kernel | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/scripts/patch-kernel b/scripts/patch-kernel index ece46ef0ba54..46a59cae3a0a 100755 --- a/scripts/patch-kernel +++ b/scripts/patch-kernel @@ -213,6 +213,7 @@ fi if [ $stopvers != "default" ]; then STOPSUBLEVEL=`echo $stopvers | cut -d. -f3` STOPEXTRA=`echo $stopvers | cut -d. -f4` + STOPFULLVERSION=${stopvers%%.$STOPEXTRA} #echo "#___STOPSUBLEVEL=/$STOPSUBLEVEL/, STOPEXTRA=/$STOPEXTRA/" else STOPSUBLEVEL=9999 @@ -249,7 +250,7 @@ while : # incrementing SUBLEVEL (s in v.p.s) do CURRENTFULLVERSION="$VERSION.$PATCHLEVEL.$SUBLEVEL" EXTRAVER= - if [ $stopvers = $CURRENTFULLVERSION ]; then + if [ $STOPFULLVERSION = $CURRENTFULLVERSION ]; then echo "Stopping at $CURRENTFULLVERSION base as requested." break fi -- cgit v1.2.3 From 0b0de144333fca335a0111a6f9c59176ad43ba0a Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Mon, 4 Aug 2008 13:31:32 -0400 Subject: Kconfig: Extend "menuconfig" for modules to simplify Kconfig file Given that the init/Kconfig file uses a "menuconfig" directive for modules already, might as well wrap all the submenu entries in an "if" to toss all those dependencies. Signed-off-by: Robert P. J. Day Acked-by: Randy Dunlap Signed-off-by: Sam Ravnborg --- init/Kconfig | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/init/Kconfig b/init/Kconfig index 7e6dae1ae727..b678803deccf 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -845,9 +845,10 @@ menuconfig MODULES If unsure, say Y. +if MODULES + config MODULE_FORCE_LOAD bool "Forced module loading" - depends on MODULES default n help Allow loading of modules without version information (ie. modprobe @@ -856,7 +857,6 @@ config MODULE_FORCE_LOAD config MODULE_UNLOAD bool "Module unloading" - depends on MODULES help Without this option you will not be able to unload any modules (note that some modules may not be unloadable @@ -875,7 +875,6 @@ config MODULE_FORCE_UNLOAD config MODVERSIONS bool "Module versioning support" - depends on MODULES help Usually, you have to use modules compiled with your kernel. Saying Y here makes it sometimes possible to use modules @@ -886,7 +885,6 @@ config MODVERSIONS config MODULE_SRCVERSION_ALL bool "Source checksum for all modules" - depends on MODULES help Modules which contain a MODULE_VERSION get an extra "srcversion" field inserted into their modinfo section, which contains a @@ -898,11 +896,12 @@ config MODULE_SRCVERSION_ALL config KMOD def_bool y - depends on MODULES help This is being removed soon. These days, CONFIG_MODULES implies CONFIG_KMOD, so use that instead. +endif # MODULES + config STOP_MACHINE bool default y -- cgit v1.2.3 From 64a99d2a8c3ed5c4e39f3ae1cc682aa8fd3977fc Mon Sep 17 00:00:00 2001 From: Denis ChengRq Date: Mon, 4 Aug 2008 09:51:40 +0800 Subject: kbuild: a better way to generate cscope database change It's a problem about cscope target of kernel Makefile, and the cscope plugin of emacs: 1. `make cscope` will generate cscope.files cscope.{in,po,}.out; 2. the cscope plugin expect a cscope.out.{in,po,}; 3. the default `cscope -b` would generate cscope.{in,po,}.out; There are three approach to solve it: 1. modify the cscope C code; 2. modify the cscope emacs plugin lisp code; 3. modify the Makefile; I have tried to communicate with the cscope upstream, but later I realize the third approach is most meaningful. Signed-off-by: Sam Ravnborg --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 343ec4774b55..f3e206509ee1 100644 --- a/Makefile +++ b/Makefile @@ -1492,7 +1492,7 @@ quiet_cmd_cscope-file = FILELST cscope.files cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files quiet_cmd_cscope = MAKE cscope.out - cmd_cscope = cscope -b + cmd_cscope = cscope -b -f cscope.out cscope: FORCE $(call cmd,cscope-file) -- cgit v1.2.3 From 7944d3a5a70ee5c1904ed1e8b1d71ff0af2854d9 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 6 Aug 2008 20:19:41 +0000 Subject: [WATCHDOG] more coding style clean-up's More coding style clean-up's. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/Kconfig | 2 +- drivers/watchdog/Makefile | 2 +- drivers/watchdog/acquirewdt.c | 2 +- drivers/watchdog/advantechwdt.c | 17 +++++----- drivers/watchdog/alim1535_wdt.c | 2 +- drivers/watchdog/alim7101_wdt.c | 4 +-- drivers/watchdog/ar7_wdt.c | 4 +-- drivers/watchdog/at32ap700x_wdt.c | 2 +- drivers/watchdog/eurotechwdt.c | 8 ++--- drivers/watchdog/geodewdt.c | 62 ++++++++++++++-------------------- drivers/watchdog/hpwdt.c | 4 +-- drivers/watchdog/i6300esb.c | 34 +++++++++---------- drivers/watchdog/iTCO_vendor_support.c | 10 +++--- drivers/watchdog/iTCO_wdt.c | 10 +++--- drivers/watchdog/ib700wdt.c | 12 +++---- drivers/watchdog/ibmasr.c | 4 +-- drivers/watchdog/iop_wdt.c | 2 +- drivers/watchdog/it8712f_wdt.c | 2 +- drivers/watchdog/ixp4xx_wdt.c | 13 ++++--- drivers/watchdog/mpc5200_wdt.c | 6 ++-- drivers/watchdog/mpcore_wdt.c | 8 ++--- drivers/watchdog/mtx-1_wdt.c | 4 +-- drivers/watchdog/omap_wdt.c | 2 +- drivers/watchdog/pc87413_wdt.c | 38 ++++++++++----------- drivers/watchdog/pcwd.c | 6 ++-- drivers/watchdog/pcwd_pci.c | 28 +++++++-------- drivers/watchdog/pcwd_usb.c | 61 ++++++++++++++++----------------- drivers/watchdog/rm9k_wdt.c | 13 ++++--- drivers/watchdog/sb_wdog.c | 4 +-- drivers/watchdog/sbc60xxwdt.c | 4 +-- drivers/watchdog/sc1200wdt.c | 2 +- drivers/watchdog/scx200_wdt.c | 2 +- drivers/watchdog/smsc37b787_wdt.c | 4 +-- drivers/watchdog/txx9wdt.c | 2 +- drivers/watchdog/w83627hf_wdt.c | 9 +++-- drivers/watchdog/w83697hf_wdt.c | 11 +++--- drivers/watchdog/wafer5823wdt.c | 20 +++++------ drivers/watchdog/wd501p.h | 2 +- drivers/watchdog/wdrtas.c | 2 +- drivers/watchdog/wdt_pci.c | 2 +- 40 files changed, 199 insertions(+), 227 deletions(-) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 50d44b4b466b..32b9fe153641 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -463,7 +463,7 @@ config PC87413_WDT module will be called pc87413_wdt. Most people will say N. - + config 60XX_WDT tristate "SBC-60XX Watchdog Timer" depends on X86 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index cdd674ffaa21..049c91895699 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -92,7 +92,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o # MIPS Architecture obj-$(CONFIG_INDYDOG) += indydog.o -obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o +obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o obj-$(CONFIG_AR7_WDT) += ar7_wdt.o diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c index 7a5c69421f12..6e46a551395c 100644 --- a/drivers/watchdog/acquirewdt.c +++ b/drivers/watchdog/acquirewdt.c @@ -126,7 +126,7 @@ static ssize_t acq_write(struct file *file, const char __user *buf, if (!nowayout) { size_t i; /* note: just in case someone wrote the magic character - * five months ago... */ + five months ago... */ expect_close = 0; /* scan to see whether or not we got the magic character */ diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c index bfec16600475..a5110f93a755 100644 --- a/drivers/watchdog/advantechwdt.c +++ b/drivers/watchdog/advantechwdt.c @@ -47,7 +47,8 @@ #define WATCHDOG_NAME "Advantech WDT" #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ -static struct platform_device *advwdt_platform_device; /* the watchdog platform device */ +/* the watchdog platform device */ +static struct platform_device *advwdt_platform_device; static unsigned long advwdt_is_open; static char adv_expect_close; @@ -120,7 +121,7 @@ static ssize_t advwdt_write(struct file *file, const char __user *buf, for (i = 0; i != count; i++) { char c; - if (get_user(c, buf+i)) + if (get_user(c, buf + i)) return -EFAULT; if (c == 'V') adv_expect_close = 42; @@ -199,8 +200,7 @@ static int advwdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static int -advwdt_close(struct inode *inode, struct file *file) +static int advwdt_close(struct inode *inode, struct file *file) { if (adv_expect_close == 42) { advwdt_disable(); @@ -288,9 +288,9 @@ unreg_stop: static int __devexit advwdt_remove(struct platform_device *dev) { misc_deregister(&advwdt_miscdev); - release_region(wdt_start,1); - if(wdt_stop != wdt_start) - release_region(wdt_stop,1); + release_region(wdt_start, 1); + if (wdt_stop != wdt_start) + release_region(wdt_stop, 1); return 0; } @@ -315,7 +315,8 @@ static int __init advwdt_init(void) { int err; - printk(KERN_INFO "WDT driver for Advantech single board computer initialising.\n"); + printk(KERN_INFO + "WDT driver for Advantech single board computer initialising.\n"); err = platform_driver_register(&advwdt_driver); if (err) diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c index dfa11d19043a..2a7690ecf97d 100644 --- a/drivers/watchdog/alim1535_wdt.c +++ b/drivers/watchdog/alim1535_wdt.c @@ -153,7 +153,7 @@ static ssize_t ali_write(struct file *file, const char __user *data, the magic character */ for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') ali_expect_release = 42; diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c index 049c9122e40d..a045ef869439 100644 --- a/drivers/watchdog/alim7101_wdt.c +++ b/drivers/watchdog/alim7101_wdt.c @@ -125,7 +125,7 @@ static void wdt_timer_ping(unsigned long data) static void wdt_change(int writeval) { - char tmp; + char tmp; pci_read_config_byte(alim7101_pmu, ALI_7101_WDT, &tmp); if (writeval == WDT_ENABLE) { @@ -198,7 +198,7 @@ static ssize_t fop_write(struct file *file, const char __user *buf, /* now scan */ for (ofs = 0; ofs != count; ofs++) { char c; - if (get_user(c, buf+ofs)) + if (get_user(c, buf + ofs)) return -EFAULT; if (c == 'V') wdt_expect_close = 42; diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c index 9a81a205ef74..55dcbfe2bb72 100644 --- a/drivers/watchdog/ar7_wdt.c +++ b/drivers/watchdog/ar7_wdt.c @@ -213,7 +213,7 @@ static int ar7_wdt_notify_sys(struct notifier_block *this, } static struct notifier_block ar7_wdt_notifier = { - .notifier_call = ar7_wdt_notify_sys + .notifier_call = ar7_wdt_notify_sys, }; static ssize_t ar7_wdt_write(struct file *file, const char *data, @@ -230,7 +230,7 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data, expect_close = 0; for (i = 0; i < len; ++i) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_close = 1; diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c index 4538b57f451a..e8ae638e5804 100644 --- a/drivers/watchdog/at32ap700x_wdt.c +++ b/drivers/watchdog/at32ap700x_wdt.c @@ -283,7 +283,7 @@ static ssize_t at32_wdt_write(struct file *file, const char __user *data, */ for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_release = 42; diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c index 96250118fd7c..bbd14e34319f 100644 --- a/drivers/watchdog/eurotechwdt.c +++ b/drivers/watchdog/eurotechwdt.c @@ -210,7 +210,7 @@ size_t count, loff_t *ppos) for (i = 0; i != count; i++) { char c; - if (get_user(c, buf+i)) + if (get_user(c, buf + i)) return -EFAULT; if (c == 'V') eur_expect_close = 42; @@ -360,10 +360,8 @@ static int eurwdt_release(struct inode *inode, struct file *file) static int eurwdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code == SYS_DOWN || code == SYS_HALT) { - /* Turn the card off */ - eurwdt_disable_timer(); - } + if (code == SYS_DOWN || code == SYS_HALT) + eurwdt_disable_timer(); /* Turn the card off */ return NOTIFY_DONE; } diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index 04b861cfdf0c..614a5c7017b6 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -77,27 +77,24 @@ static int geodewdt_set_heartbeat(int val) return 0; } -static int -geodewdt_open(struct inode *inode, struct file *file) +static int geodewdt_open(struct inode *inode, struct file *file) { - if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags)) - return -EBUSY; + if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags)) + return -EBUSY; - if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags)) - __module_get(THIS_MODULE); + if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags)) + __module_get(THIS_MODULE); geodewdt_ping(); - return nonseekable_open(inode, file); + return nonseekable_open(inode, file); } -static int -geodewdt_release(struct inode *inode, struct file *file) +static int geodewdt_release(struct inode *inode, struct file *file) { if (safe_close) { geodewdt_disable(); module_put(THIS_MODULE); - } - else { + } else { printk(KERN_CRIT "Unexpected close - watchdog is not stopping.\n"); geodewdt_ping(); @@ -109,11 +106,10 @@ geodewdt_release(struct inode *inode, struct file *file) return 0; } -static ssize_t -geodewdt_write(struct file *file, const char __user *data, size_t len, - loff_t *ppos) +static ssize_t geodewdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { - if(len) { + if (len) { if (!nowayout) { size_t i; safe_close = 0; @@ -134,9 +130,8 @@ geodewdt_write(struct file *file, const char __user *data, size_t len, return len; } -static int -geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static int geodewdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -147,7 +142,7 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = WATCHDOG_NAME, - }; + }; switch (cmd) { case WDIOC_GETSUPPORT: @@ -200,22 +195,21 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, } static const struct file_operations geodewdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = geodewdt_write, - .ioctl = geodewdt_ioctl, - .open = geodewdt_open, - .release = geodewdt_release, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = geodewdt_write, + .ioctl = geodewdt_ioctl, + .open = geodewdt_open, + .release = geodewdt_release, }; static struct miscdevice geodewdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", - .fops = &geodewdt_fops + .fops = &geodewdt_fops, }; -static int __devinit -geodewdt_probe(struct platform_device *dev) +static int __devinit geodewdt_probe(struct platform_device *dev) { int ret, timer; @@ -246,15 +240,13 @@ geodewdt_probe(struct platform_device *dev) return ret; } -static int __devexit -geodewdt_remove(struct platform_device *dev) +static int __devexit geodewdt_remove(struct platform_device *dev) { misc_deregister(&geodewdt_miscdev); return 0; } -static void -geodewdt_shutdown(struct platform_device *dev) +static void geodewdt_shutdown(struct platform_device *dev) { geodewdt_disable(); } @@ -269,8 +261,7 @@ static struct platform_driver geodewdt_driver = { }, }; -static int __init -geodewdt_init(void) +static int __init geodewdt_init(void) { int ret; @@ -290,8 +281,7 @@ err: return ret; } -static void __exit -geodewdt_exit(void) +static void __exit geodewdt_exit(void) { platform_device_unregister(geodewdt_platform_device); platform_driver_unregister(&geodewdt_driver); diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 7ea8f3e844f3..d039d5f2fd1c 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -405,7 +405,7 @@ static int __devinit detect_cru_service(void) dmi_walk(dmi_find_cru); /* if cru_rom_addr has been set then we found a CRU service */ - return ((cru_rom_addr != NULL)? 0: -ENODEV); + return ((cru_rom_addr != NULL) ? 0: -ENODEV); } /* ------------------------------------------------------------------------- */ @@ -533,7 +533,7 @@ static ssize_t hpwdt_write(struct file *file, const char __user *data, /* scan to see whether or not we got the magic char. */ for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_release = 42; diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c index c768cb718904..c13383f7fcb9 100644 --- a/drivers/watchdog/i6300esb.c +++ b/drivers/watchdog/i6300esb.c @@ -9,18 +9,18 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * based on i810-tco.c which is in turn based on softdog.c + * based on i810-tco.c which is in turn based on softdog.c * - * The timer is implemented in the following I/O controller hubs: - * (See the intel documentation on http://developer.intel.com.) - * 6300ESB chip : document number 300641-003 + * The timer is implemented in the following I/O controller hubs: + * (See the intel documentation on http://developer.intel.com.) + * 6300ESB chip : document number 300641-003 * * 2004YYZZ Ross Biro * Initial version 0.01 * 2004YYZZ Ross Biro - * Version 0.02 + * Version 0.02 * 20050210 David Härdeman - * Ported driver to kernel 2.6 + * Ported driver to kernel 2.6 */ /* @@ -108,7 +108,8 @@ MODULE_PARM_DESC(nowayout, * reload register. After this the appropriate registers can be written * to once before they need to be unlocked again. */ -static inline void esb_unlock_registers(void) { +static inline void esb_unlock_registers(void) +{ writeb(ESB_UNLOCK1, ESB_RELOAD_REG); writeb(ESB_UNLOCK2, ESB_RELOAD_REG); } @@ -169,7 +170,7 @@ static int esb_timer_set_heartbeat(int time) /* Write timer 2 */ esb_unlock_registers(); - writel(val, ESB_TIMER2_REG); + writel(val, ESB_TIMER2_REG); /* Reload */ esb_unlock_registers(); @@ -196,7 +197,7 @@ static int esb_timer_read(void) } /* - * /dev/watchdog handling + * /dev/watchdog handling */ static int esb_open(struct inode *inode, struct file *file) @@ -242,7 +243,7 @@ static ssize_t esb_write(struct file *file, const char __user *data, /* scan to see whether or not we got the magic character */ for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') esb_expect_close = 42; @@ -262,11 +263,11 @@ static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) void __user *argp = (void __user *)arg; int __user *p = argp; static struct watchdog_info ident = { - .options = WDIOF_SETTIMEOUT | + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, - .firmware_version = 0, - .identity = ESB_MODULE_NAME, + .firmware_version = 0, + .identity = ESB_MODULE_NAME, }; switch (cmd) { @@ -324,10 +325,9 @@ static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) static int esb_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code == SYS_DOWN || code == SYS_HALT) { - /* Turn the WDT off */ - esb_timer_stop(); - } + if (code == SYS_DOWN || code == SYS_HALT) + esb_timer_stop(); /* Turn the WDT off */ + return NOTIFY_DONE; } diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index e9e1f7b3fb75..ca344a85eb95 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -18,9 +18,9 @@ */ /* Module and version information */ -#define DRV_NAME "iTCO_vendor_support" -#define DRV_VERSION "1.01" -#define DRV_RELDATE "11-Nov-2006" +#define DRV_NAME "iTCO_vendor_support" +#define DRV_VERSION "1.01" +#define DRV_RELDATE "11-Nov-2006" #define PFX DRV_NAME ": " /* Includes */ @@ -37,8 +37,8 @@ /* iTCO defines */ #define SMI_EN acpibase + 0x30 /* SMI Control and Enable Register */ -#define TCOBASE acpibase + 0x60 /* TCO base address */ -#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ +#define TCOBASE acpibase + 0x60 /* TCO base address */ +#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ /* List of vendor support modes */ /* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */ diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index b18766436638..bfb93bc2ca9f 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -55,9 +55,9 @@ */ /* Module and version information */ -#define DRV_NAME "iTCO_wdt" -#define DRV_VERSION "1.03" -#define DRV_RELDATE "30-Apr-2008" +#define DRV_NAME "iTCO_wdt" +#define DRV_VERSION "1.03" +#define DRV_RELDATE "30-Apr-2008" #define PFX DRV_NAME ": " /* Includes */ @@ -107,7 +107,7 @@ enum iTCO_chipsets { TCO_ICH9, /* ICH9 */ TCO_ICH9R, /* ICH9R */ TCO_ICH9DH, /* ICH9DH */ - TCO_ICH9DO, /* ICH9DO */ + TCO_ICH9DO, /* ICH9DO */ TCO_631XESB, /* 631xESB/632xESB */ }; @@ -497,7 +497,7 @@ static ssize_t iTCO_wdt_write(struct file *file, const char __user *data, magic character */ for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_release = 42; diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c index 6aa914e5caf5..05a28106e8eb 100644 --- a/drivers/watchdog/ib700wdt.c +++ b/drivers/watchdog/ib700wdt.c @@ -129,8 +129,7 @@ MODULE_PARM_DESC(nowayout, * Watchdog Operations */ -static void -ibwdt_ping(void) +static void ibwdt_ping(void) { spin_lock(&ibwdt_lock); @@ -140,16 +139,14 @@ ibwdt_ping(void) spin_unlock(&ibwdt_lock); } -static void -ibwdt_disable(void) +static void ibwdt_disable(void) { spin_lock(&ibwdt_lock); outb_p(0, WDT_STOP); spin_unlock(&ibwdt_lock); } -static int -ibwdt_set_heartbeat(int t) +static int ibwdt_set_heartbeat(int t) { int i; @@ -263,8 +260,7 @@ static int ibwdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static int -ibwdt_close(struct inode *inode, struct file *file) +static int ibwdt_close(struct inode *inode, struct file *file) { if (expect_close == 42) { ibwdt_disable(); diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c index 0b549f3ff915..b82405cfb4cd 100644 --- a/drivers/watchdog/ibmasr.c +++ b/drivers/watchdog/ibmasr.c @@ -275,7 +275,7 @@ static long asr_ioctl(struct file *file, unsigned int cmd, unsigned long arg) static const struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, - .identity = "IBM ASR" + .identity = "IBM ASR", }; void __user *argp = (void __user *)arg; int __user *p = argp; @@ -345,7 +345,7 @@ static int asr_release(struct inode *inode, struct file *file) static const struct file_operations asr_fops = { .owner = THIS_MODULE, - .llseek = no_llseek, + .llseek = no_llseek, .write = asr_write, .unlocked_ioctl = asr_ioctl, .open = asr_open, diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c index e0d0a90ea10c..8278b13f77c7 100644 --- a/drivers/watchdog/iop_wdt.c +++ b/drivers/watchdog/iop_wdt.c @@ -241,7 +241,7 @@ static int __init iop_wdt_init(void) with an open */ ret = misc_register(&iop_wdt_miscdev); if (ret == 0) - printk("iop watchdog timer: timeout %lu sec\n", + printk(KERN_INFO "iop watchdog timer: timeout %lu sec\n", iop_watchdog_timeout()); return ret; diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c index c1db74f6e310..2270ee07c01b 100644 --- a/drivers/watchdog/it8712f_wdt.c +++ b/drivers/watchdog/it8712f_wdt.c @@ -221,7 +221,7 @@ static ssize_t it8712f_wdt_write(struct file *file, const char __user *data, expect_close = 0; for (i = 0; i < len; ++i) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_close = 42; diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c index b94713e4773d..ef3157dc9ac1 100644 --- a/drivers/watchdog/ixp4xx_wdt.c +++ b/drivers/watchdog/ixp4xx_wdt.c @@ -157,8 +157,7 @@ static int ixp4xx_wdt_release(struct inode *inode, struct file *file) } -static const struct file_operations ixp4xx_wdt_fops = -{ +static const struct file_operations ixp4xx_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = ixp4xx_wdt_write, @@ -167,8 +166,7 @@ static const struct file_operations ixp4xx_wdt_fops = .release = ixp4xx_wdt_release, }; -static struct miscdevice ixp4xx_wdt_miscdev = -{ +static struct miscdevice ixp4xx_wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &ixp4xx_wdt_fops, @@ -181,8 +179,8 @@ static int __init ixp4xx_wdt_init(void) asm("mrc p15, 0, %0, cr0, cr0, 0;" : "=r"(processor_id) :); if (!(processor_id & 0xf) && !cpu_is_ixp46x()) { - printk("IXP4XXX Watchdog: Rev. A0 IXP42x CPU detected - " - "watchdog disabled\n"); + printk(KERN_ERR "IXP4XXX Watchdog: Rev. A0 IXP42x CPU detected" + " - watchdog disabled\n"); return -ENODEV; } @@ -191,7 +189,8 @@ static int __init ixp4xx_wdt_init(void) WDIOF_CARDRESET : 0; ret = misc_register(&ixp4xx_wdt_miscdev); if (ret == 0) - printk("IXP4xx Watchdog Timer: heartbeat %d sec\n", heartbeat); + printk(KERN_INFO "IXP4xx Watchdog Timer: heartbeat %d sec\n", + heartbeat); return ret; } diff --git a/drivers/watchdog/mpc5200_wdt.c b/drivers/watchdog/mpc5200_wdt.c index ce1811d5d6b1..db91892558f2 100644 --- a/drivers/watchdog/mpc5200_wdt.c +++ b/drivers/watchdog/mpc5200_wdt.c @@ -164,7 +164,7 @@ static int mpc5200_wdt_release(struct inode *inode, struct file *file) static const struct file_operations mpc5200_wdt_fops = { .owner = THIS_MODULE, .write = mpc5200_wdt_write, - .ioctl = mpc5200_wdt_ioctl, + .unlocked_ioctl = mpc5200_wdt_ioctl, .open = mpc5200_wdt_open, .release = mpc5200_wdt_release, }; @@ -219,9 +219,9 @@ static int mpc5200_wdt_probe(struct of_device *op, return 0; iounmap(wdt->regs); - out_release: +out_release: release_mem_region(wdt->mem.start, size); - out_free: +out_free: kfree(wdt); return err; } diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c index 3c4f95599c65..2a9bfa81f9d6 100644 --- a/drivers/watchdog/mpcore_wdt.c +++ b/drivers/watchdog/mpcore_wdt.c @@ -377,13 +377,13 @@ static int __devinit mpcore_wdt_probe(struct platform_device *dev) return 0; - err_irq: +err_irq: misc_deregister(&mpcore_wdt_miscdev); - err_misc: +err_misc: iounmap(wdt->base); - err_free: +err_free: kfree(wdt); - err_out: +err_out: return ret; } diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index f820b82da7c3..b4b7b0a4c119 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -191,14 +191,14 @@ static const struct file_operations mtx1_wdt_fops = { .unlocked_ioctl = mtx1_wdt_ioctl, .open = mtx1_wdt_open, .write = mtx1_wdt_write, - .release = mtx1_wdt_release + .release = mtx1_wdt_release, }; static struct miscdevice mtx1_wdt_misc = { .minor = WATCHDOG_MINOR, .name = "watchdog", - .fops = &mtx1_wdt_fops + .fops = &mtx1_wdt_fops, }; diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 7beb21ce1de9..6f5420f478a9 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -245,7 +245,7 @@ static const struct file_operations omap_wdt_fops = { static struct miscdevice omap_wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", - .fops = &omap_wdt_fops + .fops = &omap_wdt_fops, }; static int __init omap_wdt_probe(struct platform_device *pdev) diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c index 5fc7f1349950..e91ada72da1d 100644 --- a/drivers/watchdog/pc87413_wdt.c +++ b/drivers/watchdog/pc87413_wdt.c @@ -38,7 +38,7 @@ /* #define DEBUG 1 */ -#define DEFAULT_TIMEOUT 1 /* 1 minute */ +#define DEFAULT_TIMEOUT 1 /* 1 minute */ #define MAX_TIMEOUT 255 #define VERSION "1.1" @@ -46,17 +46,17 @@ #define PFX MODNAME ": " #define DPFX MODNAME " - DEBUG: " -#define WDT_INDEX_IO_PORT (io+0) /* I/O port base (index register) */ +#define WDT_INDEX_IO_PORT (io+0) /* I/O port base (index register) */ #define WDT_DATA_IO_PORT (WDT_INDEX_IO_PORT+1) #define SWC_LDN 0x04 -#define SIOCFG2 0x22 /* Serial IO register */ -#define WDCTL 0x10 /* Watchdog-Timer-Controll-Register */ -#define WDTO 0x11 /* Watchdog timeout register */ -#define WDCFG 0x12 /* Watchdog config register */ +#define SIOCFG2 0x22 /* Serial IO register */ +#define WDCTL 0x10 /* Watchdog-Timer-Controll-Register */ +#define WDTO 0x11 /* Watchdog timeout register */ +#define WDCFG 0x12 /* Watchdog config register */ -static int io = 0x2E; /* Address used on Portwell Boards */ +static int io = 0x2E; /* Address used on Portwell Boards */ -static int timeout = DEFAULT_TIMEOUT; /* timeout value */ +static int timeout = DEFAULT_TIMEOUT; /* timeout value */ static unsigned long timer_enabled; /* is the timer enabled? */ static char expect_close; /* is the close expected? */ @@ -99,14 +99,14 @@ static inline void pc87413_enable_swc(void) /* Step 2: Enable SWC functions */ - outb_p(0x07, WDT_INDEX_IO_PORT); /* Point SWC_LDN (LDN=4) */ + outb_p(0x07, WDT_INDEX_IO_PORT); /* Point SWC_LDN (LDN=4) */ outb_p(SWC_LDN, WDT_DATA_IO_PORT); - outb_p(0x30, WDT_INDEX_IO_PORT); /* Read Index 0x30 First */ + outb_p(0x30, WDT_INDEX_IO_PORT); /* Read Index 0x30 First */ cr_data = inb(WDT_DATA_IO_PORT); - cr_data |= 0x01; /* Set Bit0 to 1 */ + cr_data |= 0x01; /* Set Bit0 to 1 */ outb_p(0x30, WDT_INDEX_IO_PORT); - outb_p(cr_data, WDT_DATA_IO_PORT); /* Index0x30_bit0P1 */ + outb_p(cr_data, WDT_DATA_IO_PORT); /* Index0x30_bit0P1 */ #ifdef DEBUG printk(KERN_INFO DPFX "pc87413 - Enable SWC functions\n"); @@ -122,10 +122,10 @@ static inline unsigned int pc87413_get_swc_base(void) /* Step 3: Read SWC I/O Base Address */ - outb_p(0x60, WDT_INDEX_IO_PORT); /* Read Index 0x60 */ + outb_p(0x60, WDT_INDEX_IO_PORT); /* Read Index 0x60 */ addr_h = inb(WDT_DATA_IO_PORT); - outb_p(0x61, WDT_INDEX_IO_PORT); /* Read Index 0x61 */ + outb_p(0x61, WDT_INDEX_IO_PORT); /* Read Index 0x61 */ addr_l = inb(WDT_DATA_IO_PORT); @@ -374,7 +374,7 @@ static ssize_t pc87413_write(struct file *file, const char __user *data, magic character */ for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_close = 42; @@ -413,7 +413,7 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd, WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, .firmware_version = 1, - .identity = "PC87413(HF/F) watchdog" + .identity = "PC87413(HF/F) watchdog", }; uarg.i = (int __user *)arg; @@ -507,7 +507,7 @@ static struct notifier_block pc87413_notifier = { static struct miscdevice pc87413_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", - .fops = &pc87413_fops + .fops = &pc87413_fops, }; /* -- Module init functions -------------------------------------*/ @@ -567,9 +567,9 @@ static void __exit pc87413_exit(void) misc_deregister(&pc87413_miscdev); unregister_reboot_notifier(&pc87413_notifier); - /* release_region(io,2); */ + /* release_region(io, 2); */ - printk(MODNAME " watchdog component driver removed.\n"); + printk(KERN_INFO MODNAME " watchdog component driver removed.\n"); } module_init(pc87413_init); diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c index 134386a88852..3b0ddc7fcf3f 100644 --- a/drivers/watchdog/pcwd.c +++ b/drivers/watchdog/pcwd.c @@ -145,7 +145,7 @@ static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 }; #define CMD_ISA_RESET_RELAYS 0x0D /* Watchdog's Dip Switch heartbeat values */ -static const int heartbeat_tbl [] = { +static const int heartbeat_tbl[] = { 20, /* OFF-OFF-OFF = 20 Sec */ 40, /* OFF-OFF-ON = 40 Sec */ 60, /* OFF-ON-OFF = 1 Min */ @@ -272,7 +272,7 @@ static int set_command_mode(void) printk(KERN_DEBUG PFX "command_mode=%d\n", pcwd_private.command_mode); - return(found); + return found; } static void unset_command_mode(void) @@ -325,7 +325,7 @@ static inline int pcwd_get_option_switches(void) } unset_command_mode(); - return(option_switches); + return option_switches; } static void pcwd_show_card_info(void) diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c index 2617129a7ccc..90eb1d4271d7 100644 --- a/drivers/watchdog/pcwd_pci.c +++ b/drivers/watchdog/pcwd_pci.c @@ -96,7 +96,7 @@ #define CMD_GET_CLEAR_RESET_COUNT 0x84 /* Watchdog's Dip Switch heartbeat values */ -static const int heartbeat_tbl [] = { +static const int heartbeat_tbl[] = { 5, /* OFF-OFF-OFF = 5 Sec */ 10, /* OFF-OFF-ON = 10 Sec */ 30, /* OFF-ON-OFF = 30 Sec */ @@ -219,11 +219,10 @@ static void pcipcwd_show_card_info(void) int option_switches; got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor); - if (got_fw_rev) { + if (got_fw_rev) sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor); - } else { + else sprintf(fw_ver_str, ""); - } /* Get switch settings */ option_switches = pcipcwd_get_option_switches(); @@ -330,7 +329,7 @@ static int pcipcwd_get_status(int *status) { int control_status; - *status=0; + *status = 0; control_status = inb_p(pcipcwd_private.io_addr + 1); if (control_status & WD_PCI_WTRP) *status |= WDIOF_CARDRESET; @@ -368,8 +367,8 @@ static int pcipcwd_clear_status(void) outb_p((control_status & WD_PCI_R2DS) | WD_PCI_WTRP, pcipcwd_private.io_addr + 1); /* clear reset counter */ - msb=0; - reset_counter=0xff; + msb = 0; + reset_counter = 0xff; send_command(CMD_GET_CLEAR_RESET_COUNT, &msb, &reset_counter); if (debug >= DEBUG) { @@ -441,7 +440,7 @@ static ssize_t pcipcwd_write(struct file *file, const char __user *data, /* scan to see whether or not we got the magic character */ for (i = 0; i != len; i++) { char c; - if(get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_release = 42; @@ -471,8 +470,7 @@ static long pcipcwd_ioctl(struct file *file, unsigned int cmd, switch (cmd) { case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, - sizeof (ident)) ? -EFAULT : 0; + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: { @@ -498,7 +496,7 @@ static long pcipcwd_ioctl(struct file *file, unsigned int cmd, { int new_options, retval = -EINVAL; - if (get_user (new_options, p)) + if (get_user(new_options, p)) return -EFAULT; if (new_options & WDIOS_DISABLECARD) { @@ -600,7 +598,7 @@ static ssize_t pcipcwd_temp_read(struct file *file, char __user *data, if (pcipcwd_get_temperature(&temperature)) return -EFAULT; - if (copy_to_user (data, &temperature, 1)) + if (copy_to_user(data, &temperature, 1)) return -EFAULT; return 1; @@ -625,10 +623,8 @@ static int pcipcwd_temp_release(struct inode *inode, struct file *file) static int pcipcwd_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code==SYS_DOWN || code==SYS_HALT) { - /* Turn the WDT off */ - pcipcwd_stop(); - } + if (code == SYS_DOWN || code == SYS_HALT) + pcipcwd_stop(); /* Turn the WDT off */ return NOTIFY_DONE; } diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index 8c582bc0588e..c1685c942de6 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -87,7 +87,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" _ #define USB_PCWD_PRODUCT_ID 0x1140 /* table of devices that work with this driver */ -static struct usb_device_id usb_pcwd_table [] = { +static struct usb_device_id usb_pcwd_table[] = { { USB_DEVICE(USB_PCWD_VENDOR_ID, USB_PCWD_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -109,7 +109,7 @@ MODULE_DEVICE_TABLE (usb, usb_pcwd_table); #define CMD_DISABLE_WATCHDOG CMD_ENABLE_WATCHDOG /* Watchdog's Dip Switch heartbeat values */ -static const int heartbeat_tbl [] = { +static const int heartbeat_tbl[] = { 5, /* OFF-OFF-OFF = 5 Sec */ 10, /* OFF-OFF-ON = 10 Sec */ 30, /* OFF-ON-OFF = 30 Sec */ @@ -129,15 +129,15 @@ static char expect_release; /* Structure to hold all of our device specific stuff */ struct usb_pcwd_private { - struct usb_device * udev; /* save off the usb device pointer */ - struct usb_interface * interface; /* the interface for this device */ + struct usb_device *udev; /* save off the usb device pointer */ + struct usb_interface *interface; /* the interface for this device */ unsigned int interface_number; /* the interface number used for cmd's */ - unsigned char * intr_buffer; /* the buffer to intr data */ + unsigned char *intr_buffer; /* the buffer to intr data */ dma_addr_t intr_dma; /* the dma address for the intr buffer */ size_t intr_size; /* the size of the intr buffer */ - struct urb * intr_urb; /* the urb used for the intr pipe */ + struct urb *intr_urb; /* the urb used for the intr pipe */ unsigned char cmd_command; /* The command that is reported back */ unsigned char cmd_data_msb; /* The data MSB that is reported back */ @@ -153,8 +153,8 @@ static struct usb_pcwd_private *usb_pcwd_device; static DEFINE_MUTEX(disconnect_mutex); /* local function prototypes */ -static int usb_pcwd_probe (struct usb_interface *interface, const struct usb_device_id *id); -static void usb_pcwd_disconnect (struct usb_interface *interface); +static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_device_id *id); +static void usb_pcwd_disconnect(struct usb_interface *interface); /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver usb_pcwd_driver = { @@ -194,10 +194,10 @@ static void usb_pcwd_intr_done(struct urb *urb) usb_pcwd->cmd_data_lsb = data[2]; /* notify anyone waiting that the cmd has finished */ - atomic_set (&usb_pcwd->cmd_received, 1); + atomic_set(&usb_pcwd->cmd_received, 1); resubmit: - retval = usb_submit_urb (urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) printk(KERN_ERR PFX "can't resubmit intr, usb_submit_urb failed with result %d\n", retval); @@ -223,7 +223,7 @@ static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd, unsigned cha dbg("sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x", buf[0], buf[1], buf[2]); - atomic_set (&usb_pcwd->cmd_received, 0); + atomic_set(&usb_pcwd->cmd_received, 0); if (usb_control_msg(usb_pcwd->udev, usb_sndctrlpipe(usb_pcwd->udev, 0), HID_REQ_SET_REPORT, HID_DT_REPORT, @@ -236,7 +236,7 @@ static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd, unsigned cha got_response = 0; for (count = 0; (count < USB_COMMAND_TIMEOUT) && (!got_response); count++) { mdelay(1); - if (atomic_read (&usb_pcwd->cmd_received)) + if (atomic_read(&usb_pcwd->cmd_received)) got_response = 1; } @@ -355,7 +355,7 @@ static ssize_t usb_pcwd_write(struct file *file, const char __user *data, /* scan to see whether or not we got the magic character */ for (i = 0; i != len; i++) { char c; - if(get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_release = 42; @@ -383,8 +383,7 @@ static long usb_pcwd_ioctl(struct file *file, unsigned int cmd, switch (cmd) { case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, - sizeof (ident)) ? -EFAULT : 0; + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: @@ -404,7 +403,7 @@ static long usb_pcwd_ioctl(struct file *file, unsigned int cmd, { int new_options, retval = -EINVAL; - if (get_user (new_options, p)) + if (get_user(new_options, p)) return -EFAULT; if (new_options & WDIOS_DISABLECARD) { @@ -518,10 +517,8 @@ static int usb_pcwd_temperature_release(struct inode *inode, struct file *file) static int usb_pcwd_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code==SYS_DOWN || code==SYS_HALT) { - /* Turn the WDT off */ - usb_pcwd_stop(usb_pcwd_device); - } + if (code == SYS_DOWN || code == SYS_HALT) + usb_pcwd_stop(usb_pcwd_device); /* Turn the WDT off */ return NOTIFY_DONE; } @@ -566,13 +563,13 @@ static struct notifier_block usb_pcwd_notifier = { /** * usb_pcwd_delete */ -static inline void usb_pcwd_delete (struct usb_pcwd_private *usb_pcwd) +static inline void usb_pcwd_delete(struct usb_pcwd_private *usb_pcwd) { usb_free_urb(usb_pcwd->intr_urb); if (usb_pcwd->intr_buffer != NULL) usb_buffer_free(usb_pcwd->udev, usb_pcwd->intr_size, usb_pcwd->intr_buffer, usb_pcwd->intr_dma); - kfree (usb_pcwd); + kfree(usb_pcwd); } /** @@ -625,7 +622,7 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); /* allocate memory for our device and initialize it */ - usb_pcwd = kzalloc (sizeof(struct usb_pcwd_private), GFP_KERNEL); + usb_pcwd = kzalloc(sizeof(struct usb_pcwd_private), GFP_KERNEL); if (usb_pcwd == NULL) { printk(KERN_ERR PFX "Out of memory\n"); goto error; @@ -640,7 +637,8 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi usb_pcwd->intr_size = (le16_to_cpu(endpoint->wMaxPacketSize) > 8 ? le16_to_cpu(endpoint->wMaxPacketSize) : 8); /* set up the memory buffer's */ - if (!(usb_pcwd->intr_buffer = usb_buffer_alloc(udev, usb_pcwd->intr_size, GFP_ATOMIC, &usb_pcwd->intr_dma))) { + usb_pcwd->intr_buffer = usb_buffer_alloc(udev, usb_pcwd->intr_size, GFP_ATOMIC, &usb_pcwd->intr_dma); + if (!usb_pcwd->intr_buffer) { printk(KERN_ERR PFX "Out of memory\n"); goto error; } @@ -674,11 +672,10 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi /* Get the Firmware Version */ got_fw_rev = usb_pcwd_send_command(usb_pcwd, CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor); - if (got_fw_rev) { + if (got_fw_rev) sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor); - } else { + else sprintf(fw_ver_str, ""); - } printk(KERN_INFO PFX "Found card (Firmware: %s) with temp option\n", fw_ver_str); @@ -724,7 +721,7 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi } /* we can register the device now, as it is ready */ - usb_set_intfdata (interface, usb_pcwd); + usb_set_intfdata(interface, usb_pcwd); printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n", heartbeat, nowayout); @@ -758,8 +755,8 @@ static void usb_pcwd_disconnect(struct usb_interface *interface) /* prevent races with open() */ mutex_lock(&disconnect_mutex); - usb_pcwd = usb_get_intfdata (interface); - usb_set_intfdata (interface, NULL); + usb_pcwd = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); mutex_lock(&usb_pcwd->mtx); @@ -819,5 +816,5 @@ static void __exit usb_pcwd_exit(void) } -module_init (usb_pcwd_init); -module_exit (usb_pcwd_exit); +module_init(usb_pcwd_init); +module_exit(usb_pcwd_exit); diff --git a/drivers/watchdog/rm9k_wdt.c b/drivers/watchdog/rm9k_wdt.c index c172906b553c..f1ae3729a19e 100644 --- a/drivers/watchdog/rm9k_wdt.c +++ b/drivers/watchdog/rm9k_wdt.c @@ -234,8 +234,8 @@ static int wdt_gpi_release(struct inode *inode, struct file *file) return 0; } -static ssize_t -wdt_gpi_write(struct file *f, const char __user *d, size_t s, loff_t *o) +static ssize_t wdt_gpi_write(struct file *f, const char __user *d, size_t s, + loff_t *o) { char val; @@ -325,8 +325,8 @@ static long wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg) /* Shutdown notifier */ -static int -wdt_gpi_notify(struct notifier_block *this, unsigned long code, void *unused) +static int wdt_gpi_notify(struct notifier_block *this, unsigned long code, + void *unused) { if (code == SYS_DOWN || code == SYS_HALT) wdt_gpi_stop(); @@ -336,9 +336,8 @@ wdt_gpi_notify(struct notifier_block *this, unsigned long code, void *unused) /* Init & exit procedures */ -static const struct resource * -wdt_gpi_get_resource(struct platform_device *pdv, const char *name, - unsigned int type) +static const struct resource *wdt_gpi_get_resource(struct platform_device *pdv, + const char *name, unsigned int type) { char buf[80]; if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf) diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c index 528097651f7f..27e526a07c9a 100644 --- a/drivers/watchdog/sb_wdog.c +++ b/drivers/watchdog/sb_wdog.c @@ -215,8 +215,8 @@ static long sbwdog_ioctl(struct file *file, unsigned int cmd, /* * Notifier for system down */ -static int -sbwdog_notify_sys(struct notifier_block *this, unsigned long code, void *erf) +static int sbwdog_notify_sys(struct notifier_block *this, unsigned long code, + void *erf) { if (code == SYS_DOWN || code == SYS_HALT) { /* diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c index e801cd46c647..3266daaaecf8 100644 --- a/drivers/watchdog/sbc60xxwdt.c +++ b/drivers/watchdog/sbc60xxwdt.c @@ -183,7 +183,7 @@ static ssize_t fop_write(struct file *file, const char __user *buf, magic character */ for (ofs = 0; ofs != count; ofs++) { char c; - if (get_user(c, buf+ofs)) + if (get_user(c, buf + ofs)) return -EFAULT; if (c == 'V') wdt_expect_close = 42; @@ -238,7 +238,7 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) switch (cmd) { case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))? -EFAULT : 0; + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index f3bdc8227cc4..23da3ccd832a 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -279,7 +279,7 @@ static ssize_t sc1200wdt_write(struct file *file, const char __user *data, for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_close = 42; diff --git a/drivers/watchdog/scx200_wdt.c b/drivers/watchdog/scx200_wdt.c index fd5c09446bce..9e19a10a5bb9 100644 --- a/drivers/watchdog/scx200_wdt.c +++ b/drivers/watchdog/scx200_wdt.c @@ -143,7 +143,7 @@ static ssize_t scx200_wdt_write(struct file *file, const char __user *data, expect_close = 0; for (i = 0; i < len; ++i) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_close = 42; diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c index 239383da6d87..988ff1d5b4be 100644 --- a/drivers/watchdog/smsc37b787_wdt.c +++ b/drivers/watchdog/smsc37b787_wdt.c @@ -408,7 +408,7 @@ static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data, magic character */ for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_close = 42; @@ -438,7 +438,7 @@ static long wb_smsc_wdt_ioctl(struct file *file, WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, .firmware_version = 0, - .identity = "SMsC 37B787 Watchdog" + .identity = "SMsC 37B787 Watchdog", }; uarg.i = (int __user *)arg; diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c index 8382f9a9534b..dbbc018a5f46 100644 --- a/drivers/watchdog/txx9wdt.c +++ b/drivers/watchdog/txx9wdt.c @@ -190,7 +190,7 @@ static struct miscdevice txx9wdt_miscdev = { }; static struct notifier_block txx9wdt_notifier = { - .notifier_call = txx9wdt_notify_sys + .notifier_call = txx9wdt_notify_sys, }; static int __init txx9wdt_probe(struct platform_device *dev) diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c index 59507f609996..69396adaa5c3 100644 --- a/drivers/watchdog/w83627hf_wdt.c +++ b/drivers/watchdog/w83627hf_wdt.c @@ -180,7 +180,7 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, for (i = 0; i != count; i++) { char c; - if (get_user(c, buf+i)) + if (get_user(c, buf + i)) return -EFAULT; if (c == 'V') expect_close = 42; @@ -278,10 +278,9 @@ static int wdt_close(struct inode *inode, struct file *file) static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code == SYS_DOWN || code == SYS_HALT) { - /* Turn the WDT off */ - wdt_disable(); - } + if (code == SYS_DOWN || code == SYS_HALT) + wdt_disable(); /* Turn the WDT off */ + return NOTIFY_DONE; } diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index 12bd6618ed5e..445d30a01ed3 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -218,7 +218,7 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, for (i = 0; i != count; i++) { char c; - if (get_user(c, buf+i)) + if (get_user(c, buf + i)) return -EFAULT; if (c == 'V') expect_close = 42; @@ -325,10 +325,9 @@ static int wdt_close(struct inode *inode, struct file *file) static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code == SYS_DOWN || code == SYS_HALT) { - /* Turn the WDT off */ - wdt_disable(); - } + if (code == SYS_DOWN || code == SYS_HALT) + wdt_disable(); /* Turn the WDT off */ + return NOTIFY_DONE; } @@ -414,7 +413,7 @@ static int __init wdt_init(void) w83697hf_init(); if (early_disable) { if (wdt_running()) - printk (KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n"); + printk(KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n"); wdt_disable(); } diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c index 44e81f7d4322..68377ae171ff 100644 --- a/drivers/watchdog/wafer5823wdt.c +++ b/drivers/watchdog/wafer5823wdt.c @@ -1,11 +1,11 @@ /* * ICP Wafer 5823 Single Board Computer WDT driver - * http://www.icpamerica.com/wafer_5823.php - * May also work on other similar models + * http://www.icpamerica.com/wafer_5823.php + * May also work on other similar models * * (c) Copyright 2002 Justin Cormack * - * Release 0.02 + * Release 0.02 * * Based on advantechwdt.c which is based on wdt.c. * Original copyright messages: @@ -50,10 +50,10 @@ static DEFINE_SPINLOCK(wafwdt_lock); /* * You must set these - there is no sane way to probe for this board. * - * To enable, write the timeout value in seconds (1 to 255) to I/O - * port WDT_START, then read the port to start the watchdog. To pat - * the dog, read port WDT_STOP to stop the timer, then read WDT_START - * to restart it again. + * To enable, write the timeout value in seconds (1 to 255) to I/O + * port WDT_START, then read the port to start the watchdog. To pat + * the dog, read port WDT_STOP to stop the timer, then read WDT_START + * to restart it again. */ static int wdt_stop = 0x843; @@ -87,8 +87,7 @@ static void wafwdt_start(void) inb_p(wdt_start); } -static void -wafwdt_stop(void) +static void wafwdt_stop(void) { /* stop watchdog */ inb_p(wdt_stop); @@ -199,8 +198,7 @@ static int wafwdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static int -wafwdt_close(struct inode *inode, struct file *file) +static int wafwdt_close(struct inode *inode, struct file *file) { if (expect_close == 42) wafwdt_stop(); diff --git a/drivers/watchdog/wd501p.h b/drivers/watchdog/wd501p.h index a4504f40394d..db34853c28ae 100644 --- a/drivers/watchdog/wd501p.h +++ b/drivers/watchdog/wd501p.h @@ -12,7 +12,7 @@ * http://www.cymru.net * * This driver is provided under the GNU General Public License, incorporated - * herein by reference. The driver is provided without warranty or + * herein by reference. The driver is provided without warranty or * support. * * Release 0.04. diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c index 20fd6715f25f..5d3b1a8e28b0 100644 --- a/drivers/watchdog/wdrtas.c +++ b/drivers/watchdog/wdrtas.c @@ -313,7 +313,7 @@ static long wdrtas_ioctl(struct file *file, unsigned int cmd, static struct watchdog_info wdinfo = { .options = WDRTAS_SUPPORTED_MASK, .firmware_version = 0, - .identity = "wdrtas" + .identity = "wdrtas", }; switch (cmd) { diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c index fb8fc0144852..ed02bdb38c09 100644 --- a/drivers/watchdog/wdt_pci.c +++ b/drivers/watchdog/wdt_pci.c @@ -381,7 +381,7 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, for (i = 0; i != count; i++) { char c; - if (get_user(c, buf+i)) + if (get_user(c, buf + i)) return -EFAULT; if (c == 'V') expect_close = 42; -- cgit v1.2.3 From 970a8a513c30a1c3e8995609a153658a34bc02bf Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Aug 2008 22:19:39 +0200 Subject: m68k/amiserial: fix fallout of tty break handling rework commit 9e98966c7bb94355689478bc84cc3e0c190f977e (tty: rework break handling) forgot to update one exit point of rs_break() in the Amiga serial driver. Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- drivers/char/amiserial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index 3530ff417a51..6e763e3f5a81 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -1254,7 +1254,7 @@ static int rs_break(struct tty_struct *tty, int break_state) unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_break")) - return; + return -EINVAL; local_irq_save(flags); if (break_state == -1) -- cgit v1.2.3 From 73ce48f6c6b9d9dcf6a2bba0bcde39ede76809f0 Mon Sep 17 00:00:00 2001 From: Juerg Haefliger Date: Wed, 6 Aug 2008 22:41:03 +0200 Subject: hwmon: (dme1737) Cleanups Fix names of attribute structs to make them more consistent with the rest of the code. Minor comment changes. Signed-off-by: Juerg Haefliger Signed-off-by: Jean Delvare --- drivers/hwmon/dme1737.c | 94 ++++++++++++++++++++++++------------------------- 1 file changed, 47 insertions(+), 47 deletions(-) diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 5e2cf0aef480..9635fa6014fc 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -1166,7 +1166,7 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", res); } -static struct attribute *dme1737_attr_pwm[]; +static struct attribute *dme1737_pwm_chmod_attr[]; static void dme1737_chmod_file(struct device*, struct attribute*, mode_t); static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, @@ -1230,7 +1230,7 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, switch (val) { case 0: /* Change permissions of pwm[ix] to read-only */ - dme1737_chmod_file(dev, dme1737_attr_pwm[ix], + dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], S_IRUGO); /* Turn fan fully on */ data->pwm_config[ix] = PWM_EN_TO_REG(0, @@ -1245,12 +1245,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, dme1737_write(client, DME1737_REG_PWM_CONFIG(ix), data->pwm_config[ix]); /* Change permissions of pwm[ix] to read-writeable */ - dme1737_chmod_file(dev, dme1737_attr_pwm[ix], + dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], S_IRUGO | S_IWUSR); break; case 2: /* Change permissions of pwm[ix] to read-only */ - dme1737_chmod_file(dev, dme1737_attr_pwm[ix], + dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], S_IRUGO); /* Turn on auto mode using the saved zone channel * assignment */ @@ -1612,7 +1612,7 @@ static const struct attribute_group dme1737_group = { /* The following structs hold the PWM attributes, some of which are optional. * Their creation depends on the chip configuration which is determined during * module load. */ -static struct attribute *dme1737_attr_pwm1[] = { +static struct attribute *dme1737_pwm1_attr[] = { &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_pwm1_freq.dev_attr.attr, &sensor_dev_attr_pwm1_enable.dev_attr.attr, @@ -1623,7 +1623,7 @@ static struct attribute *dme1737_attr_pwm1[] = { &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm2[] = { +static struct attribute *dme1737_pwm2_attr[] = { &sensor_dev_attr_pwm2.dev_attr.attr, &sensor_dev_attr_pwm2_freq.dev_attr.attr, &sensor_dev_attr_pwm2_enable.dev_attr.attr, @@ -1634,7 +1634,7 @@ static struct attribute *dme1737_attr_pwm2[] = { &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm3[] = { +static struct attribute *dme1737_pwm3_attr[] = { &sensor_dev_attr_pwm3.dev_attr.attr, &sensor_dev_attr_pwm3_freq.dev_attr.attr, &sensor_dev_attr_pwm3_enable.dev_attr.attr, @@ -1645,13 +1645,13 @@ static struct attribute *dme1737_attr_pwm3[] = { &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm5[] = { +static struct attribute *dme1737_pwm5_attr[] = { &sensor_dev_attr_pwm5.dev_attr.attr, &sensor_dev_attr_pwm5_freq.dev_attr.attr, &sensor_dev_attr_pwm5_enable.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm6[] = { +static struct attribute *dme1737_pwm6_attr[] = { &sensor_dev_attr_pwm6.dev_attr.attr, &sensor_dev_attr_pwm6_freq.dev_attr.attr, &sensor_dev_attr_pwm6_enable.dev_attr.attr, @@ -1659,53 +1659,53 @@ static struct attribute *dme1737_attr_pwm6[] = { }; static const struct attribute_group dme1737_pwm_group[] = { - { .attrs = dme1737_attr_pwm1 }, - { .attrs = dme1737_attr_pwm2 }, - { .attrs = dme1737_attr_pwm3 }, + { .attrs = dme1737_pwm1_attr }, + { .attrs = dme1737_pwm2_attr }, + { .attrs = dme1737_pwm3_attr }, { .attrs = NULL }, - { .attrs = dme1737_attr_pwm5 }, - { .attrs = dme1737_attr_pwm6 }, + { .attrs = dme1737_pwm5_attr }, + { .attrs = dme1737_pwm6_attr }, }; /* The following structs hold the fan attributes, some of which are optional. * Their creation depends on the chip configuration which is determined during * module load. */ -static struct attribute *dme1737_attr_fan1[] = { +static struct attribute *dme1737_fan1_attr[] = { &sensor_dev_attr_fan1_input.dev_attr.attr, &sensor_dev_attr_fan1_min.dev_attr.attr, &sensor_dev_attr_fan1_alarm.dev_attr.attr, &sensor_dev_attr_fan1_type.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_fan2[] = { +static struct attribute *dme1737_fan2_attr[] = { &sensor_dev_attr_fan2_input.dev_attr.attr, &sensor_dev_attr_fan2_min.dev_attr.attr, &sensor_dev_attr_fan2_alarm.dev_attr.attr, &sensor_dev_attr_fan2_type.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_fan3[] = { +static struct attribute *dme1737_fan3_attr[] = { &sensor_dev_attr_fan3_input.dev_attr.attr, &sensor_dev_attr_fan3_min.dev_attr.attr, &sensor_dev_attr_fan3_alarm.dev_attr.attr, &sensor_dev_attr_fan3_type.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_fan4[] = { +static struct attribute *dme1737_fan4_attr[] = { &sensor_dev_attr_fan4_input.dev_attr.attr, &sensor_dev_attr_fan4_min.dev_attr.attr, &sensor_dev_attr_fan4_alarm.dev_attr.attr, &sensor_dev_attr_fan4_type.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_fan5[] = { +static struct attribute *dme1737_fan5_attr[] = { &sensor_dev_attr_fan5_input.dev_attr.attr, &sensor_dev_attr_fan5_min.dev_attr.attr, &sensor_dev_attr_fan5_alarm.dev_attr.attr, &sensor_dev_attr_fan5_max.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_fan6[] = { +static struct attribute *dme1737_fan6_attr[] = { &sensor_dev_attr_fan6_input.dev_attr.attr, &sensor_dev_attr_fan6_min.dev_attr.attr, &sensor_dev_attr_fan6_alarm.dev_attr.attr, @@ -1714,17 +1714,17 @@ static struct attribute *dme1737_attr_fan6[] = { }; static const struct attribute_group dme1737_fan_group[] = { - { .attrs = dme1737_attr_fan1 }, - { .attrs = dme1737_attr_fan2 }, - { .attrs = dme1737_attr_fan3 }, - { .attrs = dme1737_attr_fan4 }, - { .attrs = dme1737_attr_fan5 }, - { .attrs = dme1737_attr_fan6 }, + { .attrs = dme1737_fan1_attr }, + { .attrs = dme1737_fan2_attr }, + { .attrs = dme1737_fan3_attr }, + { .attrs = dme1737_fan4_attr }, + { .attrs = dme1737_fan5_attr }, + { .attrs = dme1737_fan6_attr }, }; /* The permissions of all of the following attributes are changed to read- * writeable if the chip is *not* locked. Otherwise they stay read-only. */ -static struct attribute *dme1737_attr_lock[] = { +static struct attribute *dme1737_misc_chmod_attr[] = { /* Temperatures */ &sensor_dev_attr_temp1_offset.dev_attr.attr, &sensor_dev_attr_temp2_offset.dev_attr.attr, @@ -1745,14 +1745,14 @@ static struct attribute *dme1737_attr_lock[] = { NULL }; -static const struct attribute_group dme1737_lock_group = { - .attrs = dme1737_attr_lock, +static const struct attribute_group dme1737_misc_chmod_group = { + .attrs = dme1737_misc_chmod_attr, }; /* The permissions of the following PWM attributes are changed to read- * writeable if the chip is *not* locked and the respective PWM is available. * Otherwise they stay read-only. */ -static struct attribute *dme1737_attr_pwm1_lock[] = { +static struct attribute *dme1737_pwm1_chmod_attr[] = { &sensor_dev_attr_pwm1_freq.dev_attr.attr, &sensor_dev_attr_pwm1_enable.dev_attr.attr, &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, @@ -1761,7 +1761,7 @@ static struct attribute *dme1737_attr_pwm1_lock[] = { &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm2_lock[] = { +static struct attribute *dme1737_pwm2_chmod_attr[] = { &sensor_dev_attr_pwm2_freq.dev_attr.attr, &sensor_dev_attr_pwm2_enable.dev_attr.attr, &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, @@ -1770,7 +1770,7 @@ static struct attribute *dme1737_attr_pwm2_lock[] = { &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm3_lock[] = { +static struct attribute *dme1737_pwm3_chmod_attr[] = { &sensor_dev_attr_pwm3_freq.dev_attr.attr, &sensor_dev_attr_pwm3_enable.dev_attr.attr, &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, @@ -1779,29 +1779,29 @@ static struct attribute *dme1737_attr_pwm3_lock[] = { &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm5_lock[] = { +static struct attribute *dme1737_pwm5_chmod_attr[] = { &sensor_dev_attr_pwm5.dev_attr.attr, &sensor_dev_attr_pwm5_freq.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm6_lock[] = { +static struct attribute *dme1737_pwm6_chmod_attr[] = { &sensor_dev_attr_pwm6.dev_attr.attr, &sensor_dev_attr_pwm6_freq.dev_attr.attr, NULL }; -static const struct attribute_group dme1737_pwm_lock_group[] = { - { .attrs = dme1737_attr_pwm1_lock }, - { .attrs = dme1737_attr_pwm2_lock }, - { .attrs = dme1737_attr_pwm3_lock }, +static const struct attribute_group dme1737_pwm_chmod_group[] = { + { .attrs = dme1737_pwm1_chmod_attr }, + { .attrs = dme1737_pwm2_chmod_attr }, + { .attrs = dme1737_pwm3_chmod_attr }, { .attrs = NULL }, - { .attrs = dme1737_attr_pwm5_lock }, - { .attrs = dme1737_attr_pwm6_lock }, + { .attrs = dme1737_pwm5_chmod_attr }, + { .attrs = dme1737_pwm6_chmod_attr }, }; /* Pwm[1-3] are read-writeable if the associated pwm is in manual mode and the * chip is not locked. Otherwise they are read-only. */ -static struct attribute *dme1737_attr_pwm[] = { +static struct attribute *dme1737_pwm_chmod_attr[] = { &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_pwm2.dev_attr.attr, &sensor_dev_attr_pwm3.dev_attr.attr, @@ -1927,15 +1927,15 @@ static int dme1737_create_files(struct device *dev) dev_info(dev, "Device is locked. Some attributes " "will be read-only.\n"); } else { - /* Change permissions of standard attributes */ - dme1737_chmod_group(dev, &dme1737_lock_group, + /* Change permissions of standard sysfs attributes */ + dme1737_chmod_group(dev, &dme1737_misc_chmod_group, S_IRUGO | S_IWUSR); - /* Change permissions of PWM attributes */ - for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_lock_group); ix++) { + /* Change permissions of PWM sysfs attributes */ + for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_chmod_group); ix++) { if (data->has_pwm & (1 << ix)) { dme1737_chmod_group(dev, - &dme1737_pwm_lock_group[ix], + &dme1737_pwm_chmod_group[ix], S_IRUGO | S_IWUSR); } } @@ -1945,7 +1945,7 @@ static int dme1737_create_files(struct device *dev) if ((data->has_pwm & (1 << ix)) && (PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) { dme1737_chmod_file(dev, - dme1737_attr_pwm[ix], + dme1737_pwm_chmod_attr[ix], S_IRUGO | S_IWUSR); } } -- cgit v1.2.3 From 55d68d75ab00e60953f8784af5927b60967a297f Mon Sep 17 00:00:00 2001 From: Juerg Haefliger Date: Wed, 6 Aug 2008 22:41:03 +0200 Subject: hwmon: (dme1737) Skip detection if forced Skip the checking of the device ID register in the hwmon register block if the force_id option is used. Signed-off-by: Juerg Haefliger Signed-off-by: Jean Delvare --- drivers/hwmon/dme1737.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 9635fa6014fc..b36290048b98 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -2360,13 +2360,16 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev) client->addr = res->start; platform_set_drvdata(pdev, data); - company = dme1737_read(client, DME1737_REG_COMPANY); - device = dme1737_read(client, DME1737_REG_DEVICE); + /* Skip chip detection if module is loaded with force_id parameter */ + if (!force_id) { + company = dme1737_read(client, DME1737_REG_COMPANY); + device = dme1737_read(client, DME1737_REG_DEVICE); - if (!((company == DME1737_COMPANY_SMSC) && - (device == SCH311X_DEVICE))) { - err = -ENODEV; - goto exit_kfree; + if (!((company == DME1737_COMPANY_SMSC) && + (device == SCH311X_DEVICE))) { + err = -ENODEV; + goto exit_kfree; + } } data->type = -1; -- cgit v1.2.3 From 549edb83327f2a5027a22d65b10603b01dc40175 Mon Sep 17 00:00:00 2001 From: Juerg Haefliger Date: Wed, 6 Aug 2008 22:41:03 +0200 Subject: hwmon: (dme1737) Add support for the SMSC SCH5027 Add support for the SCH5027. The differences to the DME1737 are: - No support for programmable temp offsets - In auto mode, PWM outputs stay on min value if temp goes below low threshold and can't be programmed to fully turn off - Different voltage scaling - No VID input Signed-off-by: Juerg Haefliger Signed-off-by: Jean Delvare --- Documentation/hwmon/dme1737 | 53 ++++++++---- drivers/hwmon/Kconfig | 4 +- drivers/hwmon/dme1737.c | 193 +++++++++++++++++++++++++++++--------------- 3 files changed, 169 insertions(+), 81 deletions(-) diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737 index b1fe00999439..001d2e70bc11 100644 --- a/Documentation/hwmon/dme1737 +++ b/Documentation/hwmon/dme1737 @@ -10,6 +10,10 @@ Supported chips: Prefix: 'sch311x' Addresses scanned: none, address read from Super-I/O config space Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf + * SMSC SCH5027 + Prefix: 'sch5027' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: Provided by SMSC upon request and under NDA Authors: Juerg Haefliger @@ -27,33 +31,31 @@ Module Parameters following boards: - VIA EPIA SN18000 -Note that there is no need to use this parameter if the driver loads without -complaining. The driver will say so if it is necessary. - Description ----------- This driver implements support for the hardware monitoring capabilities of the -SMSC DME1737 and Asus A8000 (which are the same) and SMSC SCH311x Super-I/O -chips. These chips feature monitoring of 3 temp sensors temp[1-3] (2 remote -diodes and 1 internal), 7 voltages in[0-6] (6 external and 1 internal) and up -to 6 fan speeds fan[1-6]. Additionally, the chips implement up to 5 PWM -outputs pwm[1-3,5-6] for controlling fan speeds both manually and +SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, and SMSC +SCH311x Super-I/O chips. These chips feature monitoring of 3 temp sensors +temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and +1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement +up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and automatically. -For the DME1737 and A8000, fan[1-2] and pwm[1-2] are always present. Fan[3-6] -and pwm[3,5-6] are optional features and their availability depends on the -configuration of the chip. The driver will detect which features are present -during initialization and create the sysfs attributes accordingly. +For the DME1737, A8000 and SCH5027, fan[1-2] and pwm[1-2] are always present. +Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on +the configuration of the chip. The driver will detect which features are +present during initialization and create the sysfs attributes accordingly. For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and pwm[5-6] don't exist. -The hardware monitoring features of the DME1737 and A8000 are only accessible -via SMBus, while the SCH311x only provides access via the ISA bus. The driver -will therefore register itself as an I2C client driver if it detects a DME1737 -or A8000 and as a platform driver if it detects a SCH311x chip. +The hardware monitoring features of the DME1737, A8000, and SCH5027 are only +accessible via SMBus, while the SCH311x only provides access via the ISA bus. +The driver will therefore register itself as an I2C client driver if it detects +a DME1737, A8000, or SCH5027 and as a platform driver if it detects a SCH311x +chip. Voltage Monitoring @@ -64,6 +66,7 @@ scaling resistors. The values returned by the driver therefore reflect true millivolts and don't need scaling. The voltage inputs are mapped as follows (the last column indicates the input ranges): +DME1737, A8000: in0: +5VTR (+5V standby) 0V - 6.64V in1: Vccp (processor core) 0V - 3V in2: VCC (internal +3.3V) 0V - 4.38V @@ -72,6 +75,24 @@ millivolts and don't need scaling. The voltage inputs are mapped as follows in5: VTR (+3.3V standby) 0V - 4.38V in6: Vbat (+3.0V) 0V - 4.38V +SCH311x: + in0: +2.5V 0V - 6.64V + in1: Vccp (processor core) 0V - 2V + in2: VCC (internal +3.3V) 0V - 4.38V + in3: +5V 0V - 6.64V + in4: +12V 0V - 16V + in5: VTR (+3.3V standby) 0V - 4.38V + in6: Vbat (+3.0V) 0V - 4.38V + +SCH5027: + in0: +5VTR (+5V standby) 0V - 6.64V + in1: Vccp (processor core) 0V - 3V + in2: VCC (internal +3.3V) 0V - 4.38V + in3: V2_IN 0V - 1.5V + in4: V1_IN 0V - 1.5V + in5: VTR (+3.3V standby) 0V - 4.38V + in6: Vbat (+3.0V) 0V - 4.38V + Each voltage input has associated min and max limits which trigger an alarm when crossed. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index c882fd05cf29..1de240a26fc5 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -575,8 +575,8 @@ config SENSORS_DME1737 select HWMON_VID help If you say yes here you get support for the hardware monitoring - and fan control features of the SMSC DME1737 (and compatibles - like the Asus A8000) and SCH311x Super-I/O chips. + and fan control features of the SMSC DME1737, SCH311x, SCH5027, and + Asus A8000 Super-I/O chips. This driver can also be built as a module. If so, the module will be called dme1737. diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index b36290048b98..cdb8311e4ef7 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -1,11 +1,11 @@ /* - * dme1737.c - Driver for the SMSC DME1737, Asus A8000, and SMSC SCH311x - * Super-I/O chips integrated hardware monitoring features. - * Copyright (c) 2007 Juerg Haefliger + * dme1737.c - Driver for the SMSC DME1737, Asus A8000, SMSC SCH311x and + * SCH5027 Super-I/O chips integrated hardware monitoring features. + * Copyright (c) 2007, 2008 Juerg Haefliger * * This driver is an I2C/ISA hybrid, meaning that it uses the I2C bus to access - * the chip registers if a DME1737 (or A8000) is found and the ISA bus if a - * SCH311x chip is found. Both types of chips have very similar hardware + * the chip registers if a DME1737, A8000, or SCH5027 is found and the ISA bus + * if a SCH311x chip is found. Both types of chips have very similar hardware * monitoring capabilities but differ in the way they can be accessed. * * This program is free software; you can redistribute it and/or modify @@ -57,7 +57,10 @@ MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC " static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END}; /* Insmod parameters */ -I2C_CLIENT_INSMOD_1(dme1737); +I2C_CLIENT_INSMOD_2(dme1737, sch5027); + +/* ISA chip types */ +enum isa_chips { sch311x = sch5027 + 1 }; /* --------------------------------------------------------------------- * Registers @@ -163,6 +166,7 @@ static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23}; #define DME1737_VERSTEP 0x88 #define DME1737_VERSTEP_MASK 0xf8 #define SCH311X_DEVICE 0x8c +#define SCH5027_VERSTEP 0x69 /* Length of ISA address segment */ #define DME1737_EXTENT 2 @@ -182,6 +186,7 @@ struct dme1737_data { unsigned long last_update; /* in jiffies */ unsigned long last_vbat; /* in jiffies */ enum chips type; + const int *in_nominal; /* pointer to IN_NOMINAL array */ u8 vid; u8 pwm_rr_en; @@ -220,23 +225,23 @@ static const int IN_NOMINAL_DME1737[] = {5000, 2250, 3300, 5000, 12000, 3300, 3300}; static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300, 3300}; -#define IN_NOMINAL(ix, type) (((type) == dme1737) ? \ - IN_NOMINAL_DME1737[(ix)] : \ - IN_NOMINAL_SCH311x[(ix)]) +static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300, + 3300}; +#define IN_NOMINAL(type) ((type) == sch311x ? IN_NOMINAL_SCH311x : \ + (type) == sch5027 ? IN_NOMINAL_SCH5027 : \ + IN_NOMINAL_DME1737) /* Voltage input * Voltage inputs have 16 bits resolution, limit values have 8 bits * resolution. */ -static inline int IN_FROM_REG(int reg, int ix, int res, int type) +static inline int IN_FROM_REG(int reg, int nominal, int res) { - return (reg * IN_NOMINAL(ix, type) + (3 << (res - 3))) / - (3 << (res - 2)); + return (reg * nominal + (3 << (res - 3))) / (3 << (res - 2)); } -static inline int IN_TO_REG(int val, int ix, int type) +static inline int IN_TO_REG(int val, int nominal) { - return SENSORS_LIMIT((val * 192 + IN_NOMINAL(ix, type) / 2) / - IN_NOMINAL(ix, type), 0, 255); + return SENSORS_LIMIT((val * 192 + nominal / 2) / nominal, 0, 255); } /* Temperature input @@ -565,7 +570,10 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) /* Sample register contents every 1 sec */ if (time_after(jiffies, data->last_update + HZ) || !data->valid) { - data->vid = dme1737_read(client, DME1737_REG_VID) & 0x3f; + if (data->type != sch5027) { + data->vid = dme1737_read(client, DME1737_REG_VID) & + 0x3f; + } /* In (voltage) registers */ for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) { @@ -593,8 +601,10 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) DME1737_REG_TEMP_MIN(ix)); data->temp_max[ix] = dme1737_read(client, DME1737_REG_TEMP_MAX(ix)); - data->temp_offset[ix] = dme1737_read(client, - DME1737_REG_TEMP_OFFSET(ix)); + if (data->type != sch5027) { + data->temp_offset[ix] = dme1737_read(client, + DME1737_REG_TEMP_OFFSET(ix)); + } } /* In and temp LSB registers @@ -669,9 +679,11 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) data->zone_abs[ix] = dme1737_read(client, DME1737_REG_ZONE_ABS(ix)); } - for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) { - data->zone_hyst[ix] = dme1737_read(client, + if (data->type != sch5027) { + for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) { + data->zone_hyst[ix] = dme1737_read(client, DME1737_REG_ZONE_HYST(ix)); + } } /* Alarm registers */ @@ -735,13 +747,13 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr, switch (fn) { case SYS_IN_INPUT: - res = IN_FROM_REG(data->in[ix], ix, 16, data->type); + res = IN_FROM_REG(data->in[ix], data->in_nominal[ix], 16); break; case SYS_IN_MIN: - res = IN_FROM_REG(data->in_min[ix], ix, 8, data->type); + res = IN_FROM_REG(data->in_min[ix], data->in_nominal[ix], 8); break; case SYS_IN_MAX: - res = IN_FROM_REG(data->in_max[ix], ix, 8, data->type); + res = IN_FROM_REG(data->in_max[ix], data->in_nominal[ix], 8); break; case SYS_IN_ALARM: res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01; @@ -768,12 +780,12 @@ static ssize_t set_in(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); switch (fn) { case SYS_IN_MIN: - data->in_min[ix] = IN_TO_REG(val, ix, data->type); + data->in_min[ix] = IN_TO_REG(val, data->in_nominal[ix]); dme1737_write(client, DME1737_REG_IN_MIN(ix), data->in_min[ix]); break; case SYS_IN_MAX: - data->in_max[ix] = IN_TO_REG(val, ix, data->type); + data->in_max[ix] = IN_TO_REG(val, data->in_nominal[ix]); dme1737_write(client, DME1737_REG_IN_MAX(ix), data->in_max[ix]); break; @@ -1570,43 +1582,56 @@ static struct attribute *dme1737_attr[] ={ &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp1_alarm.dev_attr.attr, &sensor_dev_attr_temp1_fault.dev_attr.attr, - &sensor_dev_attr_temp1_offset.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp2_min.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr, &sensor_dev_attr_temp2_alarm.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, - &sensor_dev_attr_temp2_offset.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, &sensor_dev_attr_temp3_min.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr, &sensor_dev_attr_temp3_alarm.dev_attr.attr, &sensor_dev_attr_temp3_fault.dev_attr.attr, - &sensor_dev_attr_temp3_offset.dev_attr.attr, /* Zones */ - &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr, &sensor_dev_attr_zone1_auto_channels_temp.dev_attr.attr, - &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr, - &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_group = { + .attrs = dme1737_attr, +}; + +/* The following struct holds misc attributes, which are not available in all + * chips. Their creation depends on the chip type which is determined during + * module load. */ +static struct attribute *dme1737_misc_attr[] = { + /* Temperatures */ + &sensor_dev_attr_temp1_offset.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, + /* Zones */ + &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, /* Misc */ &dev_attr_vrm.attr, &dev_attr_cpu0_vid.attr, NULL }; -static const struct attribute_group dme1737_group = { - .attrs = dme1737_attr, +static const struct attribute_group dme1737_misc_group = { + .attrs = dme1737_misc_attr, }; /* The following structs hold the PWM attributes, some of which are optional. @@ -1618,7 +1643,6 @@ static struct attribute *dme1737_pwm1_attr[] = { &sensor_dev_attr_pwm1_enable.dev_attr.attr, &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, NULL @@ -1629,7 +1653,6 @@ static struct attribute *dme1737_pwm2_attr[] = { &sensor_dev_attr_pwm2_enable.dev_attr.attr, &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, NULL @@ -1640,7 +1663,6 @@ static struct attribute *dme1737_pwm3_attr[] = { &sensor_dev_attr_pwm3_enable.dev_attr.attr, &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, NULL @@ -1667,6 +1689,15 @@ static const struct attribute_group dme1737_pwm_group[] = { { .attrs = dme1737_pwm6_attr }, }; +/* The following struct holds misc PWM attributes, which are not available in + * all chips. Their creation depends on the chip type which is determined + * during module load. */ +static struct attribute *dme1737_pwm_misc_attr[] = { + &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, +}; + /* The following structs hold the fan attributes, some of which are optional. * Their creation depends on the chip configuration which is determined during * module load. */ @@ -1722,31 +1753,23 @@ static const struct attribute_group dme1737_fan_group[] = { { .attrs = dme1737_fan6_attr }, }; -/* The permissions of all of the following attributes are changed to read- +/* The permissions of the following zone attributes are changed to read- * writeable if the chip is *not* locked. Otherwise they stay read-only. */ -static struct attribute *dme1737_misc_chmod_attr[] = { - /* Temperatures */ - &sensor_dev_attr_temp1_offset.dev_attr.attr, - &sensor_dev_attr_temp2_offset.dev_attr.attr, - &sensor_dev_attr_temp3_offset.dev_attr.attr, - /* Zones */ - &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, +static struct attribute *dme1737_zone_chmod_attr[] = { &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr, - &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, - &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, NULL }; -static const struct attribute_group dme1737_misc_chmod_group = { - .attrs = dme1737_misc_chmod_attr, +static const struct attribute_group dme1737_zone_chmod_group = { + .attrs = dme1737_zone_chmod_attr, }; /* The permissions of the following PWM attributes are changed to read- @@ -1757,7 +1780,6 @@ static struct attribute *dme1737_pwm1_chmod_attr[] = { &sensor_dev_attr_pwm1_enable.dev_attr.attr, &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, NULL }; @@ -1766,7 +1788,6 @@ static struct attribute *dme1737_pwm2_chmod_attr[] = { &sensor_dev_attr_pwm2_enable.dev_attr.attr, &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, NULL }; @@ -1775,7 +1796,6 @@ static struct attribute *dme1737_pwm3_chmod_attr[] = { &sensor_dev_attr_pwm3_enable.dev_attr.attr, &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, NULL }; @@ -1875,9 +1895,17 @@ static void dme1737_remove_files(struct device *dev) if (data->has_pwm & (1 << ix)) { sysfs_remove_group(&dev->kobj, &dme1737_pwm_group[ix]); + if (data->type != sch5027 && ix < 3) { + sysfs_remove_file(&dev->kobj, + dme1737_pwm_misc_attr[ix]); + } } } + if (data->type != sch5027) { + sysfs_remove_group(&dev->kobj, &dme1737_misc_group); + } + sysfs_remove_group(&dev->kobj, &dme1737_group); if (!data->client.driver) { @@ -1901,6 +1929,13 @@ static int dme1737_create_files(struct device *dev) goto exit_remove; } + /* Create misc sysfs attributes */ + if ((data->type != sch5027) && + (err = sysfs_create_group(&dev->kobj, + &dme1737_misc_group))) { + goto exit_remove; + } + /* Create fan sysfs attributes */ for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) { if (data->has_fan & (1 << ix)) { @@ -1918,6 +1953,11 @@ static int dme1737_create_files(struct device *dev) &dme1737_pwm_group[ix]))) { goto exit_remove; } + if (data->type != sch5027 && ix < 3 && + (err = sysfs_create_file(&dev->kobj, + dme1737_pwm_misc_attr[ix]))) { + goto exit_remove; + } } } @@ -1927,16 +1967,27 @@ static int dme1737_create_files(struct device *dev) dev_info(dev, "Device is locked. Some attributes " "will be read-only.\n"); } else { - /* Change permissions of standard sysfs attributes */ - dme1737_chmod_group(dev, &dme1737_misc_chmod_group, + /* Change permissions of zone sysfs attributes */ + dme1737_chmod_group(dev, &dme1737_zone_chmod_group, S_IRUGO | S_IWUSR); + /* Change permissions of misc sysfs attributes */ + if (data->type != sch5027) { + dme1737_chmod_group(dev, &dme1737_misc_group, + S_IRUGO | S_IWUSR); + } + /* Change permissions of PWM sysfs attributes */ for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_chmod_group); ix++) { if (data->has_pwm & (1 << ix)) { dme1737_chmod_group(dev, &dme1737_pwm_chmod_group[ix], S_IRUGO | S_IWUSR); + if (data->type != sch5027 && ix < 3) { + dme1737_chmod_file(dev, + dme1737_pwm_misc_attr[ix], + S_IRUGO | S_IWUSR); + } } } @@ -1966,6 +2017,9 @@ static int dme1737_init_device(struct device *dev) int ix; u8 reg; + /* Point to the right nominal voltages array */ + data->in_nominal = IN_NOMINAL(data->type); + data->config = dme1737_read(client, DME1737_REG_CONFIG); /* Inform if part is not monitoring/started */ if (!(data->config & 0x01)) { @@ -2076,7 +2130,9 @@ static int dme1737_init_device(struct device *dev) data->pwm_acz[2] = 4; /* pwm3 -> zone3 */ /* Set VRM */ - data->vrm = vid_which_vrm(); + if (data->type != sch5027) { + data->vrm = vid_which_vrm(); + } return 0; } @@ -2095,9 +2151,10 @@ static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data) dme1737_sio_enter(sio_cip); /* Check device ID - * The DME1737 can return either 0x78 or 0x77 as its device ID. */ + * The DME1737 can return either 0x78 or 0x77 as its device ID. + * The SCH5027 returns 0x89 as its device ID. */ reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20); - if (!(reg == 0x77 || reg == 0x78)) { + if (!(reg == 0x77 || reg == 0x78 || reg == 0x89)) { err = -ENODEV; goto exit; } @@ -2166,15 +2223,24 @@ static int dme1737_i2c_detect(struct i2c_adapter *adapter, int address, company = dme1737_read(client, DME1737_REG_COMPANY); verstep = dme1737_read(client, DME1737_REG_VERSTEP); - if (!((company == DME1737_COMPANY_SMSC) && - ((verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP))) { + if (company == DME1737_COMPANY_SMSC && + (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) { + kind = dme1737; + } else if (company == DME1737_COMPANY_SMSC && + verstep == SCH5027_VERSTEP) { + kind = sch5027; + } else { err = -ENODEV; goto exit_kfree; } } - kind = dme1737; - name = "dme1737"; + if (kind == sch5027) { + name = "sch5027"; + } else { + kind = dme1737; + name = "dme1737"; + } data->type = kind; /* Fill in the remaining client fields and put it into the global @@ -2187,8 +2253,9 @@ static int dme1737_i2c_detect(struct i2c_adapter *adapter, int address, goto exit_kfree; } - dev_info(dev, "Found a DME1737 chip at 0x%02x (rev 0x%02x).\n", - client->addr, verstep); + dev_info(dev, "Found a %s chip at 0x%02x (rev 0x%02x).\n", + kind == sch5027 ? "SCH5027" : "DME1737", client->addr, + verstep); /* Initialize the DME1737 chip */ if ((err = dme1737_init_device(dev))) { @@ -2371,7 +2438,7 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev) goto exit_kfree; } } - data->type = -1; + data->type = sch311x; /* Fill in the remaining client fields and initialize the mutex */ strlcpy(client->name, "sch311x", I2C_NAME_SIZE); -- cgit v1.2.3 From 05a5e477687ac7a22c0791b3e899ed7d539f7b95 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 6 Aug 2008 22:41:04 +0200 Subject: hwmon: (f71882fg) Delete needless forward declarations These functions aren't used before being defined, so there's no point in forward-declaring them. Signed-off-by: Jean Delvare Acked-by: Hans de Goede --- drivers/hwmon/f71882fg.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index cbeb4984b5c7..67067e9a323e 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -87,8 +87,6 @@ static inline void superio_enter(int base); static inline void superio_select(int base, int ld); static inline void superio_exit(int base); -static inline u16 fan_from_reg ( u16 reg ); - struct f71882fg_data { unsigned short addr; struct device *hwmon_dev; @@ -116,10 +114,6 @@ struct f71882fg_data { u8 temp_diode_open; }; -static u8 f71882fg_read8(struct f71882fg_data *data, u8 reg); -static u16 f71882fg_read16(struct f71882fg_data *data, u8 reg); -static void f71882fg_write8(struct f71882fg_data *data, u8 reg, u8 val); - /* Sysfs in*/ static ssize_t show_in(struct device *dev, struct device_attribute *devattr, char *buf); -- cgit v1.2.3 From ad02ad85cf221c9a0574b48516762e37cceca0da Mon Sep 17 00:00:00 2001 From: Marc Hulsman Date: Wed, 6 Aug 2008 22:41:04 +0200 Subject: hwmon: (w83791d) Use fan divisor bits from vbat register Update w83791d with fan bits in vbat mon register (7.48 of the datasheet). This change allows all fans to have a divisor of 128, and fixes a problem with incorrectly reported fan speeds. Signed-off-by: Marc Hulsman Signed-off-by: Jean Delvare --- Documentation/hwmon/w83791d | 6 +++--- drivers/hwmon/w83791d.c | 24 ++++++++++++++++++++---- 2 files changed, 23 insertions(+), 7 deletions(-) diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d index f153b2f6d62c..a67d3b7a7098 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d @@ -22,6 +22,7 @@ Credits: Additional contributors: Sven Anders + Marc Hulsman Module Parameters ----------------- @@ -67,9 +68,8 @@ on until the temperature falls below the Hysteresis value. Fan rotation speeds are reported in RPM (rotations per minute). An alarm is triggered if the rotation speed has dropped below a programmable limit. Fan -readings can be divided by a programmable divider (1, 2, 4, 8 for fan 1/2/3 -and 1, 2, 4, 8, 16, 32, 64 or 128 for fan 4/5) to give the readings more -range or accuracy. +readings can be divided by a programmable divider (1, 2, 4, 8, 16, +32, 64 or 128 for all fans) to give the readings more range or accuracy. Voltage sensors (also known as IN sensors) report their values in millivolts. An alarm is triggered if the voltage has crossed a programmable minimum diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index e4e91c9d480a..daa7d121483b 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -233,11 +233,9 @@ static u8 fan_to_reg(long rpm, int div) static u8 div_to_reg(int nr, long val) { int i; - int max; - /* first three fan's divisor max out at 8, rest max out at 128 */ - max = (nr < 3) ? 8 : 128; - val = SENSORS_LIMIT(val, 1, max) >> 1; + /* fan divisors max out at 128 */ + val = SENSORS_LIMIT(val, 1, 128) >> 1; for (i = 0; i < 7; i++) { if (val == 0) break; @@ -530,6 +528,7 @@ static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr, unsigned long min; u8 tmp_fan_div; u8 fan_div_reg; + u8 vbat_reg; int indx = 0; u8 keep_mask = 0; u8 new_shift = 0; @@ -581,6 +580,16 @@ static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr, w83791d_write(client, W83791D_REG_FAN_DIV[indx], fan_div_reg | tmp_fan_div); + /* Bit 2 of fans 0-2 is stored in the vbat register (bits 5-7) */ + if (nr < 3) { + keep_mask = ~(1 << (nr + 5)); + vbat_reg = w83791d_read(client, W83791D_REG_VBAT) + & keep_mask; + tmp_fan_div = (data->fan_div[nr] << (3 + nr)) & ~keep_mask; + w83791d_write(client, W83791D_REG_VBAT, + vbat_reg | tmp_fan_div); + } + /* Restore fan_min */ data->fan_min[nr] = fan_to_reg(min, DIV_FROM_REG(data->fan_div[nr])); w83791d_write(client, W83791D_REG_FAN_MIN[nr], data->fan_min[nr]); @@ -1182,6 +1191,7 @@ static struct w83791d_data *w83791d_update_device(struct device *dev) struct w83791d_data *data = i2c_get_clientdata(client); int i, j; u8 reg_array_tmp[3]; + u8 vbat_reg; mutex_lock(&data->update_lock); @@ -1219,6 +1229,12 @@ static struct w83791d_data *w83791d_update_device(struct device *dev) data->fan_div[3] = reg_array_tmp[2] & 0x07; data->fan_div[4] = (reg_array_tmp[2] >> 4) & 0x07; + /* The fan divisor for fans 0-2 get bit 2 from + bits 5-7 respectively of vbat register */ + vbat_reg = w83791d_read(client, W83791D_REG_VBAT); + for (i = 0; i < 3; i++) + data->fan_div[i] |= (vbat_reg >> (3 + i)) & 0x04; + /* Update the first temperature sensor */ for (i = 0; i < 3; i++) { data->temp1[i] = w83791d_read(client, -- cgit v1.2.3 From a95a5ed856e902e513119d4cc5b745faa202f761 Mon Sep 17 00:00:00 2001 From: Dominik Geyer Date: Wed, 6 Aug 2008 22:41:04 +0200 Subject: hwmon: (w83627hf) Add pwm_enable sysfs interface Adds support for pwm_enable sysfs interface for the w83627hf driver. Signed-off-by: Dominik Geyer Signed-off-by: Jean Delvare --- drivers/hwmon/w83627hf.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 9564fb069957..ba8b069b1082 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -209,6 +209,13 @@ static const u16 w83627hf_reg_temp_over[] = { 0x39, 0x155, 0x255 }; #define W83627HF_REG_PWM1 0x5A #define W83627HF_REG_PWM2 0x5B +static const u8 W83627THF_REG_PWM_ENABLE[] = { + 0x04, /* FAN 1 mode */ + 0x04, /* FAN 2 mode */ + 0x12, /* FAN AUX mode */ +}; +static const u8 W83627THF_PWM_ENABLE_SHIFT[] = { 2, 4, 1 }; + #define W83627THF_REG_PWM1 0x01 /* 697HF/637HF/687THF too */ #define W83627THF_REG_PWM2 0x03 /* 697HF/637HF/687THF too */ #define W83627THF_REG_PWM3 0x11 /* 637HF/687THF too */ @@ -366,6 +373,9 @@ struct w83627hf_data { u32 alarms; /* Register encoding, combined */ u32 beep_mask; /* Register encoding, combined */ u8 pwm[3]; /* Register value */ + u8 pwm_enable[3]; /* 1 = manual + 2 = thermal cruise (also called SmartFan I) + 3 = fan speed cruise */ u8 pwm_freq[3]; /* Register value */ u16 sens[3]; /* 1 = pentium diode; 2 = 3904 diode; 4 = thermistor */ @@ -956,6 +966,42 @@ static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0); static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1); static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 2); +static ssize_t +show_pwm_enable(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_enable[nr]); +} + +static ssize_t +store_pwm_enable(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = dev_get_drvdata(dev); + unsigned long val = simple_strtoul(buf, NULL, 10); + u8 reg; + + if (!val || (val > 3)) /* modes 1, 2 and 3 are supported */ + return -EINVAL; + mutex_lock(&data->update_lock); + data->pwm_enable[nr] = val; + reg = w83627hf_read_value(data, W83627THF_REG_PWM_ENABLE[nr]); + reg &= ~(0x03 << W83627THF_PWM_ENABLE_SHIFT[nr]); + reg |= (val - 1) << W83627THF_PWM_ENABLE_SHIFT[nr]; + w83627hf_write_value(data, W83627THF_REG_PWM_ENABLE[nr], reg); + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 0); +static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 1); +static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 2); + static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -1223,6 +1269,11 @@ static struct attribute *w83627hf_attributes_opt[] = { &sensor_dev_attr_pwm1_freq.dev_attr.attr, &sensor_dev_attr_pwm2_freq.dev_attr.attr, &sensor_dev_attr_pwm3_freq.dev_attr.attr, + + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + NULL }; @@ -1366,6 +1417,19 @@ static int __devinit w83627hf_probe(struct platform_device *pdev) &sensor_dev_attr_pwm3_freq.dev_attr))) goto ERROR4; + if (data->type != w83627hf) + if ((err = device_create_file(dev, + &sensor_dev_attr_pwm1_enable.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_pwm2_enable.dev_attr))) + goto ERROR4; + + if (data->type == w83627thf || data->type == w83637hf + || data->type == w83687thf) + if ((err = device_create_file(dev, + &sensor_dev_attr_pwm3_enable.dev_attr))) + goto ERROR4; + data->hwmon_dev = hwmon_device_register(dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); @@ -1655,6 +1719,7 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev) { struct w83627hf_data *data = dev_get_drvdata(dev); int i, num_temps = (data->type == w83697hf) ? 2 : 3; + int num_pwms = (data->type == w83697hf) ? 2 : 3; mutex_lock(&data->update_lock); @@ -1707,6 +1772,15 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev) break; } } + if (data->type != w83627hf) { + for (i = 0; i < num_pwms; i++) { + u8 tmp = w83627hf_read_value(data, + W83627THF_REG_PWM_ENABLE[i]); + data->pwm_enable[i] = + ((tmp >> W83627THF_PWM_ENABLE_SHIFT[i]) + & 0x03) + 1; + } + } for (i = 0; i < num_temps; i++) { data->temp[i] = w83627hf_read_value( data, w83627hf_reg_temp[i]); -- cgit v1.2.3 From 2f8ea97a45e9db382787dd7afa7f500ee661aa7b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 6 Aug 2008 22:41:04 +0200 Subject: hwmon: (w83627hf) Drop reset module parameter Drop the reset parameter of the w83627hf driver. It seems it wasn't that useful. It was dropped from the Linux 2.4 version of this driver back in July 2004. The only users who have reported that they were still using this parameter, needed it to switch the chip from automatic fan speed control back to manual mode. Now that the driver creates pwmN_enable sysfs files, users will be able to use these files instead, which is way less agressive. Signed-off-by: Jean Delvare Acked-by: Dominik Geyer --- Documentation/hwmon/w83627hf | 4 ---- drivers/hwmon/w83627hf.c | 27 --------------------------- 2 files changed, 31 deletions(-) diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf index 880a59f53da9..6ee36dbafd64 100644 --- a/Documentation/hwmon/w83627hf +++ b/Documentation/hwmon/w83627hf @@ -40,10 +40,6 @@ Module Parameters (default is 1) Use 'init=0' to bypass initializing the chip. Try this if your computer crashes when you load the module. -* reset: int - (default is 0) - The driver used to reset the chip on load, but does no more. Use - 'reset=1' to restore the old behavior. Report if you need to do this. Description ----------- diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index ba8b069b1082..b30e5796cb26 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -67,10 +67,6 @@ module_param(force_i2c, byte, 0); MODULE_PARM_DESC(force_i2c, "Initialize the i2c address of the sensors"); -static int reset; -module_param(reset, bool, 0); -MODULE_PARM_DESC(reset, "Set to one to reset chip on load"); - static int init = 1; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); @@ -1600,29 +1596,6 @@ static void __devinit w83627hf_init_device(struct platform_device *pdev) enum chips type = data->type; u8 tmp; - if (reset) { - /* Resetting the chip has been the default for a long time, - but repeatedly caused problems (fans going to full - speed...) so it is now optional. It might even go away if - nobody reports it as being useful, as I see very little - reason why this would be needed at all. */ - dev_info(&pdev->dev, "If reset=1 solved a problem you were " - "having, please report!\n"); - - /* save this register */ - i = w83627hf_read_value(data, W83781D_REG_BEEP_CONFIG); - /* Reset all except Watchdog values and last conversion values - This sets fan-divs to 2, among others */ - w83627hf_write_value(data, W83781D_REG_CONFIG, 0x80); - /* Restore the register and disable power-on abnormal beep. - This saves FAN 1/2/3 input/output values set by BIOS. */ - w83627hf_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80); - /* Disable master beep-enable (reset turns it on). - Individual beeps should be reset to off but for some reason - disabling this bit helps some people not get beeped */ - w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, 0); - } - /* Minimize conflicts with other winbond i2c-only clients... */ /* disable i2c subclients... how to disable main i2c client?? */ /* force i2c address to relatively uncommon address */ -- cgit v1.2.3 From 68f823de3f1916cc0694376330c08377706b877d Mon Sep 17 00:00:00 2001 From: Grant Coady Date: Wed, 6 Aug 2008 22:41:05 +0200 Subject: hwmon: (adm9240) Remove EXPERIMENTAL dependency The adm9240 driver is in the kernel for three years now, time to remove the EXPERIMENTAL dependency. Signed-off-by: Grant Coady Signed-off-by: Jean Delvare --- drivers/hwmon/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 1de240a26fc5..7fe392899908 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -124,7 +124,7 @@ config SENSORS_ADM1031 config SENSORS_ADM9240 tristate "Analog Devices ADM9240 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for Analog Devices ADM9240, -- cgit v1.2.3 From 84f768c1633cfc547d82b9dc671ffea2f3785542 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 6 Aug 2008 22:41:05 +0200 Subject: hwmon: (thmc50) Add support for critical temperature limits Add critical temperature limits to the driver. These limits are read only. Signed-off-by: Krzysztof Helt Signed-off-by: Jean Delvare --- drivers/hwmon/thmc50.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c index 3b01001108c1..7d97431e132f 100644 --- a/drivers/hwmon/thmc50.c +++ b/drivers/hwmon/thmc50.c @@ -55,8 +55,11 @@ I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs " static const u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 }; static const u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C }; static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B }; +static const u8 THMC50_REG_TEMP_CRITICAL[] = { 0x13, 0x14, 0x14 }; +static const u8 THMC50_REG_TEMP_DEFAULT[] = { 0x17, 0x18, 0x18 }; #define THMC50_REG_CONF_nFANOFF 0x20 +#define THMC50_REG_CONF_PROGRAMMED 0x08 /* Each client has this additional data */ struct thmc50_data { @@ -72,6 +75,7 @@ struct thmc50_data { s8 temp_input[3]; s8 temp_max[3]; s8 temp_min[3]; + s8 temp_critical[3]; u8 analog_out; u8 alarms; }; @@ -199,6 +203,15 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, return count; } +static ssize_t show_temp_critical(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct thmc50_data *data = thmc50_update_device(dev); + return sprintf(buf, "%d\n", data->temp_critical[nr] * 1000); +} + static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, char *buf) { @@ -214,7 +227,9 @@ static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp, \ static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ show_temp_min, set_temp_min, offset - 1); \ static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_max, set_temp_max, offset - 1); + show_temp_max, set_temp_max, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IRUGO, \ + show_temp_critical, NULL, offset - 1); temp_reg(1); temp_reg(2); @@ -234,10 +249,12 @@ static struct attribute *thmc50_attributes[] = { &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp1_min.dev_attr.attr, &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_alarm.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr, &sensor_dev_attr_temp2_min.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, &sensor_dev_attr_temp2_alarm.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, &sensor_dev_attr_pwm1.dev_attr.attr, @@ -254,6 +271,7 @@ static struct attribute *temp3_attributes[] = { &sensor_dev_attr_temp3_max.dev_attr.attr, &sensor_dev_attr_temp3_min.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_crit.dev_attr.attr, &sensor_dev_attr_temp3_alarm.dev_attr.attr, &sensor_dev_attr_temp3_fault.dev_attr.attr, NULL @@ -429,6 +447,10 @@ static struct thmc50_data *thmc50_update_device(struct device *dev) int temps = data->has_temp3 ? 3 : 2; int i; + int prog = i2c_smbus_read_byte_data(client, THMC50_REG_CONF); + + prog &= THMC50_REG_CONF_PROGRAMMED; + for (i = 0; i < temps; i++) { data->temp_input[i] = i2c_smbus_read_byte_data(client, THMC50_REG_TEMP[i]); @@ -436,6 +458,10 @@ static struct thmc50_data *thmc50_update_device(struct device *dev) THMC50_REG_TEMP_MAX[i]); data->temp_min[i] = i2c_smbus_read_byte_data(client, THMC50_REG_TEMP_MIN[i]); + data->temp_critical[i] = + i2c_smbus_read_byte_data(client, + prog ? THMC50_REG_TEMP_CRITICAL[i] + : THMC50_REG_TEMP_DEFAULT[i]); } data->analog_out = i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT); -- cgit v1.2.3 From 6c633c3025c75f5fcf3a76d375faff34e3be021b Mon Sep 17 00:00:00 2001 From: Sean MacLennan Date: Wed, 6 Aug 2008 22:41:05 +0200 Subject: hwmon: ad7414 driver Driver for the Analog Devices AD7414 temperature monitoring chip. Signed-off-by: Sean MacLennan Signed-off-by: Jean Delvare --- drivers/hwmon/Kconfig | 10 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/ad7414.c | 268 +++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 279 insertions(+) create mode 100644 drivers/hwmon/ad7414.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 7fe392899908..bf4ebfb86fa5 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -57,6 +57,16 @@ config SENSORS_ABITUGURU3 This driver can also be built as a module. If so, the module will be called abituguru3. +config SENSORS_AD7414 + tristate "Analog Devices AD7414" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + AD7414 temperature monitoring chip. + + This driver can also be built as a module. If so, the module + will be called ad7414. + config SENSORS_AD7418 tristate "Analog Devices AD7416, AD7417 and AD7418" depends on I2C && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index d098677e08de..7943e5cefb06 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_SENSORS_W83791D) += w83791d.o obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o +obj-$(CONFIG_SENSORS_AD7414) += ad7414.o obj-$(CONFIG_SENSORS_AD7418) += ad7418.o obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c new file mode 100644 index 000000000000..ce8d94fbfd7e --- /dev/null +++ b/drivers/hwmon/ad7414.c @@ -0,0 +1,268 @@ +/* + * An hwmon driver for the Analog Devices AD7414 + * + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * Copyright (c) 2008 PIKA Technologies + * Sean MacLennan + * + * Copyright (c) 2008 Spansion Inc. + * Frank Edelhaeuser + * (converted to "new style" I2C driver model, removed checkpatch.pl warnings) + * + * Based on ad7418.c + * Copyright 2006 Tower Technologies, Alessandro Zummo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + + +/* AD7414 registers */ +#define AD7414_REG_TEMP 0x00 +#define AD7414_REG_CONF 0x01 +#define AD7414_REG_T_HIGH 0x02 +#define AD7414_REG_T_LOW 0x03 + +static u8 AD7414_REG_LIMIT[] = { AD7414_REG_T_HIGH, AD7414_REG_T_LOW }; + +struct ad7414_data { + struct device *hwmon_dev; + struct mutex lock; /* atomic read data updates */ + char valid; /* !=0 if following fields are valid */ + unsigned long next_update; /* In jiffies */ + s16 temp_input; /* Register values */ + s8 temps[ARRAY_SIZE(AD7414_REG_LIMIT)]; +}; + +/* REG: (0.25C/bit, two's complement) << 6 */ +static inline int ad7414_temp_from_reg(s16 reg) +{ + /* use integer division instead of equivalent right shift to + * guarantee arithmetic shift and preserve the sign + */ + return ((int)reg / 64) * 250; +} + +static inline int ad7414_read(struct i2c_client *client, u8 reg) +{ + if (reg == AD7414_REG_TEMP) { + int value = i2c_smbus_read_word_data(client, reg); + return (value < 0) ? value : swab16(value); + } else + return i2c_smbus_read_byte_data(client, reg); +} + +static inline int ad7414_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +struct ad7414_data *ad7414_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ad7414_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->lock); + + if (time_after(jiffies, data->next_update) || !data->valid) { + int value, i; + + dev_dbg(&client->dev, "starting ad7414 update\n"); + + value = ad7414_read(client, AD7414_REG_TEMP); + if (value < 0) + dev_dbg(&client->dev, "AD7414_REG_TEMP err %d\n", + value); + else + data->temp_input = value; + + for (i = 0; i < ARRAY_SIZE(AD7414_REG_LIMIT); ++i) { + value = ad7414_read(client, AD7414_REG_LIMIT[i]); + if (value < 0) + dev_dbg(&client->dev, "AD7414 reg %d err %d\n", + AD7414_REG_LIMIT[i], value); + else + data->temps[i] = value; + } + + data->next_update = jiffies + HZ + HZ / 2; + data->valid = 1; + } + + mutex_unlock(&data->lock); + + return data; +} + +static ssize_t show_temp_input(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7414_data *data = ad7414_update_device(dev); + return sprintf(buf, "%d\n", ad7414_temp_from_reg(data->temp_input)); +} +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0); + +static ssize_t show_max_min(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int index = to_sensor_dev_attr(attr)->index; + struct ad7414_data *data = ad7414_update_device(dev); + return sprintf(buf, "%d\n", data->temps[index] * 1000); +} + +static ssize_t set_max_min(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ad7414_data *data = i2c_get_clientdata(client); + int index = to_sensor_dev_attr(attr)->index; + u8 reg = AD7414_REG_LIMIT[index]; + long temp = simple_strtol(buf, NULL, 10); + + temp = SENSORS_LIMIT(temp, -40000, 85000); + temp = (temp + (temp < 0 ? -500 : 500)) / 1000; + + mutex_lock(&data->lock); + data->temps[index] = temp; + ad7414_write(client, reg, temp); + mutex_unlock(&data->lock); + return count; +} + +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, + show_max_min, set_max_min, 0); +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, + show_max_min, set_max_min, 1); + +static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int bitnr = to_sensor_dev_attr(attr)->index; + struct ad7414_data *data = ad7414_update_device(dev); + int value = (data->temp_input >> bitnr) & 1; + return sprintf(buf, "%d\n", value); +} + +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 4); + +static struct attribute *ad7414_attributes[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group ad7414_group = { + .attrs = ad7414_attributes, +}; + +static int ad7414_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct ad7414_data *data; + int conf; + int err = 0; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_READ_WORD_DATA)) + goto exit; + + data = kzalloc(sizeof(struct ad7414_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "chip found\n"); + + /* Make sure the chip is powered up. */ + conf = i2c_smbus_read_byte_data(client, AD7414_REG_CONF); + if (conf < 0) + dev_warn(&client->dev, + "ad7414_probe unable to read config register.\n"); + else { + conf &= ~(1 << 7); + i2c_smbus_write_byte_data(client, AD7414_REG_CONF, conf); + } + + /* Register sysfs hooks */ + err = sysfs_create_group(&client->dev.kobj, &ad7414_group); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &ad7414_group); +exit_free: + kfree(data); +exit: + return err; +} + +static int __devexit ad7414_remove(struct i2c_client *client) +{ + struct ad7414_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &ad7414_group); + kfree(data); + return 0; +} + +static const struct i2c_device_id ad7414_id[] = { + { "ad7414", 0 }, + {} +}; + +static struct i2c_driver ad7414_driver = { + .driver = { + .name = "ad7414", + }, + .probe = ad7414_probe, + .remove = __devexit_p(ad7414_remove), + .id_table = ad7414_id, +}; + +static int __init ad7414_init(void) +{ + return i2c_add_driver(&ad7414_driver); +} +module_init(ad7414_init); + +static void __exit ad7414_exit(void) +{ + i2c_del_driver(&ad7414_driver); +} +module_exit(ad7414_exit); + +MODULE_AUTHOR("Stefan Roese , " + "Frank Edelhaeuser "); + +MODULE_DESCRIPTION("AD7414 driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 15872212e876de9ae404108e4ad231a645b55b54 Mon Sep 17 00:00:00 2001 From: Frank Myhr Date: Wed, 6 Aug 2008 22:41:06 +0200 Subject: hwmon: (hwmon-vid) Trivial format multi-line comments per CodingStyle Signed-off-by: Frank Myhr Signed-off-by: Jean Delvare --- drivers/hwmon/hwmon-vid.c | 140 +++++++++++++++++++++++----------------------- 1 file changed, 71 insertions(+), 69 deletions(-) diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index 3330667280b9..ed78a72e7261 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -1,76 +1,78 @@ /* - hwmon-vid.c - VID/VRM/VRD voltage conversions - - Copyright (c) 2004 Rudolf Marek - - Partly imported from i2c-vid.h of the lm_sensors project - Copyright (c) 2002 Mark D. Studebaker - With assistance from Trent Piepho - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ + * hwmon-vid.c - VID/VRM/VRD voltage conversions + * + * Copyright (c) 2004 Rudolf Marek + * + * Partly imported from i2c-vid.h of the lm_sensors project + * Copyright (c) 2002 Mark D. Studebaker + * With assistance from Trent Piepho + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ #include #include #include /* - Common code for decoding VID pins. - - References: - - For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines", - available at http://developer.intel.com/. - - For VRD 10.0 and up, "VRD x.y Design Guide", - available at http://developer.intel.com/. - - AMD Opteron processors don't follow the Intel specifications. - I'm going to "make up" 2.4 as the spec number for the Opterons. - No good reason just a mnemonic for the 24x Opteron processor - series. - - Opteron VID encoding is: - 00000 = 1.550 V - 00001 = 1.525 V - . . . . - 11110 = 0.800 V - 11111 = 0.000 V (off) - - The 17 specification is in fact Intel Mobile Voltage Positioning - - (IMVP-II). You can find more information in the datasheet of Max1718 - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452 - - The 13 specification corresponds to the Intel Pentium M series. There - doesn't seem to be any named specification for these. The conversion - tables are detailed directly in the various Pentium M datasheets: - http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm - - The 14 specification corresponds to Intel Core series. There - doesn't seem to be any named specification for these. The conversion - tables are detailed directly in the various Pentium Core datasheets: - http://www.intel.com/design/mobile/datashts/309221.htm - - The 110 (VRM 11) specification corresponds to Intel Conroe based series. - http://www.intel.com/design/processor/applnots/313214.htm -*/ - -/* vrm is the VRM/VRD document version multiplied by 10. - val is the 4-bit or more VID code. - Returned value is in mV to avoid floating point in the kernel. - Some VID have some bits in uV scale, this is rounded to mV */ + * Common code for decoding VID pins. + * + * References: + * + * For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines", + * available at http://developer.intel.com/. + * + * For VRD 10.0 and up, "VRD x.y Design Guide", + * available at http://developer.intel.com/. + * + * AMD Opteron processors don't follow the Intel specifications. + * I'm going to "make up" 2.4 as the spec number for the Opterons. + * No good reason just a mnemonic for the 24x Opteron processor + * series. + * + * Opteron VID encoding is: + * 00000 = 1.550 V + * 00001 = 1.525 V + * . . . . + * 11110 = 0.800 V + * 11111 = 0.000 V (off) + * + * The 17 specification is in fact Intel Mobile Voltage Positioning - + * (IMVP-II). You can find more information in the datasheet of Max1718 + * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452 + * + * The 13 specification corresponds to the Intel Pentium M series. There + * doesn't seem to be any named specification for these. The conversion + * tables are detailed directly in the various Pentium M datasheets: + * http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm + * + * The 14 specification corresponds to Intel Core series. There + * doesn't seem to be any named specification for these. The conversion + * tables are detailed directly in the various Pentium Core datasheets: + * http://www.intel.com/design/mobile/datashts/309221.htm + * + * The 110 (VRM 11) specification corresponds to Intel Conroe based series. + * http://www.intel.com/design/processor/applnots/313214.htm + */ + +/* + * vrm is the VRM/VRD document version multiplied by 10. + * val is the 4-bit or more VID code. + * Returned value is in mV to avoid floating point in the kernel. + * Some VID have some bits in uV scale, this is rounded to mV. + */ int vid_from_reg(int val, u8 vrm) { int vid; @@ -141,9 +143,9 @@ int vid_from_reg(int val, u8 vrm) /* - After this point is the code to automatically determine which - VRM/VRD specification should be used depending on the CPU. -*/ + * After this point is the code to automatically determine which + * VRM/VRD specification should be used depending on the CPU. + */ struct vrm_model { u8 vendor; -- cgit v1.2.3 From 116d0486bdefc11f71e567cadf0c47f788b4dd06 Mon Sep 17 00:00:00 2001 From: Frank Myhr Date: Wed, 6 Aug 2008 22:41:06 +0200 Subject: hwmon: (hwmon-vid) Add 6-bit vid codes for AMD NPT 0Fh cpus AMD NPT 0Fh cpus use 6 bit VID codes. Successive codes with msb 0 describe 25mV decrements, while those with msb 1 describe 12.5mV decrements. Existing hwmon-vid.c is correct only for codes with msb 0; add support for the codes with msb 1. Ref: p 309, Table 71 AMD Publication 32559, BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh Processors http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf Signed-off-by: Frank Myhr Signed-off-by: Jean Delvare --- drivers/hwmon/hwmon-vid.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index ed78a72e7261..7b0a32c4dcfb 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -37,18 +37,14 @@ * For VRD 10.0 and up, "VRD x.y Design Guide", * available at http://developer.intel.com/. * + * AMD NPT 0Fh (Athlon64 & Opteron), AMD Publication 32559, + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf + * Table 71. VID Code Voltages * AMD Opteron processors don't follow the Intel specifications. * I'm going to "make up" 2.4 as the spec number for the Opterons. * No good reason just a mnemonic for the 24x Opteron processor * series. * - * Opteron VID encoding is: - * 00000 = 1.550 V - * 00001 = 1.525 V - * . . . . - * 11110 = 0.800 V - * 11111 = 0.000 V (off) - * * The 17 specification is in fact Intel Mobile Voltage Positioning - * (IMVP-II). You can find more information in the datasheet of Max1718 * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452 @@ -98,9 +94,11 @@ int vid_from_reg(int val, u8 vrm) if (val < 0x02 || val > 0xb2) return 0; return((1600000 - (val - 2) * 6250 + 500) / 1000); - case 24: /* Opteron processor */ - val &= 0x1f; - return(val == 0x1f ? 0 : 1550 - val * 25); + + case 24: /* AMD NPT 0Fh (Athlon64 & Opteron) */ + val &= 0x3f; + return (val < 32) ? 1550 - 25 * val + : 775 - (25 * (val - 31)) / 2; case 91: /* VRM 9.1 */ case 90: /* VRM 9.0 */ -- cgit v1.2.3 From 0475169c13e177e1af5a02f5e9f30fda13dc0b86 Mon Sep 17 00:00:00 2001 From: Andrew Paprocki Date: Wed, 6 Aug 2008 22:41:06 +0200 Subject: hwmon: (it87) Support for 16-bit fan reading in it8712 >= rev 0x07 The it8712 chip supports 16-bit fan tachometers in revisions >= 0x07. Revisions >= 0x08 dropped support for 8-bit fan divisor registers. The patch enables 16-bit fan readings on all revisions >= 0x07 just like the it8716 and it8718 chips. Signed-off-by: Andrew Paprocki Signed-off-by: Jean Delvare --- Documentation/hwmon/it87 | 9 +++++---- drivers/hwmon/it87.c | 32 ++++++++++++++++++++++---------- 2 files changed, 27 insertions(+), 14 deletions(-) diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index f4ce1fdbeff6..d931525f3f37 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -11,7 +11,9 @@ Supported chips: Prefix: 'it8712' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website - http://www.ite.com.tw/ + http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.1.pdf + http://www.ite.com.tw/product_info/file/pc/Errata%20V0.1%20for%20IT8712F%20V0.9.1.pdf + http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.3.pdf * IT8716F/IT8726F Prefix: 'it8716' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -90,14 +92,13 @@ upper VID bits share their pins with voltage inputs (in5 and in6) so you can't have both on a given board. The IT8716F, IT8718F and later IT8712F revisions have support for -2 additional fans. They are supported by the driver for the IT8716F and -IT8718F but not for the IT8712F +2 additional fans. The additional fans are supported by the driver. The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This is better (no more fan clock divider mess) but not compatible with the older chips and revisions. For now, the driver only uses the 16-bit mode on the -IT8716F and IT8718F. +late IT8712F, IT8716F and IT8718F. The IT8726F is just bit enhanced IT8716F with additional hardware for AMD power sequencing. Therefore the chip will appear as IT8716F diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index e12c132ff83a..2a365681f969 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -151,9 +151,9 @@ static int fix_pwm_polarity; /* The IT8718F has the VID value in a different register, in Super-I/O configuration space. */ #define IT87_REG_VID 0x0a -/* Warning: register 0x0b is used for something completely different in - new chips/revisions. I suspect only 16-bit tachometer mode will work - for these. */ +/* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b + for fan divisors. Later IT8712F revisions must use 16-bit tachometer + mode. */ #define IT87_REG_FAN_DIV 0x0b #define IT87_REG_FAN_16BIT 0x0c @@ -234,6 +234,7 @@ static const unsigned int pwm_freq[8] = { struct it87_sio_data { enum chips type; /* Values read from Super-I/O config space */ + u8 revision; u8 vid_value; }; @@ -242,6 +243,7 @@ struct it87_sio_data { struct it87_data { struct device *hwmon_dev; enum chips type; + u8 revision; unsigned short addr; const char *name; @@ -268,6 +270,14 @@ struct it87_data { u8 manual_pwm_ctl[3]; /* manual PWM value set by user */ }; +static inline int has_16bit_fans(const struct it87_data *data) +{ + /* IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I. + This is the first revision with 16bit tachometer support. */ + return (data->type == it8712 && data->revision >= 0x07) + || data->type == it8716 + || data->type == it8718; +} static int it87_probe(struct platform_device *pdev); static int __devexit it87_remove(struct platform_device *pdev); @@ -991,8 +1001,9 @@ static int __init it87_find(unsigned short *address, } err = 0; + sio_data->revision = superio_inb(DEVREV) & 0x0f; pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n", - chip_type, *address, superio_inb(DEVREV) & 0x0f); + chip_type, *address, sio_data->revision); /* Read GPIO config and VID value from LDN 7 (GPIO) */ if (chip_type != IT8705F_DEVID) { @@ -1045,6 +1056,7 @@ static int __devinit it87_probe(struct platform_device *pdev) data->addr = res->start; data->type = sio_data->type; + data->revision = sio_data->revision; data->name = names[sio_data->type]; /* Now, we do the remaining detection. */ @@ -1069,7 +1081,7 @@ static int __devinit it87_probe(struct platform_device *pdev) goto ERROR2; /* Do not create fan files for disabled fans */ - if (data->type == it8716 || data->type == it8718) { + if (has_16bit_fans(data)) { /* 16-bit tachometers */ if (data->has_fan & (1 << 0)) { if ((err = device_create_file(dev, @@ -1350,7 +1362,7 @@ static void __devinit it87_init_device(struct platform_device *pdev) data->has_fan = (data->fan_main_ctrl >> 4) & 0x07; /* Set tachometers to 16-bit mode if needed */ - if (data->type == it8716 || data->type == it8718) { + if (has_16bit_fans(data)) { tmp = it87_read_value(data, IT87_REG_FAN_16BIT); if (~tmp & 0x07 & data->has_fan) { dev_dbg(&pdev->dev, @@ -1426,7 +1438,7 @@ static struct it87_data *it87_update_device(struct device *dev) data->fan[i] = it87_read_value(data, IT87_REG_FAN[i]); /* Add high byte if in 16-bit mode */ - if (data->type == it8716 || data->type == it8718) { + if (has_16bit_fans(data)) { data->fan[i] |= it87_read_value(data, IT87_REG_FANX[i]) << 8; data->fan_min[i] |= it87_read_value(data, @@ -1443,8 +1455,7 @@ static struct it87_data *it87_update_device(struct device *dev) } /* Newer chips don't have clock dividers */ - if ((data->has_fan & 0x07) && data->type != it8716 - && data->type != it8718) { + if ((data->has_fan & 0x07) && !has_16bit_fans(data)) { i = it87_read_value(data, IT87_REG_FAN_DIV); data->fan_div[0] = i & 0x07; data->fan_div[1] = (i >> 3) & 0x07; @@ -1460,7 +1471,8 @@ static struct it87_data *it87_update_device(struct device *dev) data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL); data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE); - /* The 8705 does not have VID capability */ + /* The 8705 does not have VID capability. + The 8718 does not use IT87_REG_VID for the same purpose. */ if (data->type == it8712 || data->type == it8716) { data->vid = it87_read_value(data, IT87_REG_VID); /* The older IT8712F revisions had only 5 VID pins, -- cgit v1.2.3 From 816d8c6a2580562698cf0fa0b9e5b4dd570e636e Mon Sep 17 00:00:00 2001 From: Andrew Paprocki Date: Wed, 6 Aug 2008 22:41:06 +0200 Subject: hwmon: (it87) Support for 16-bit fan reading in it8705 >= rev 0x03 The it8705 chip supports 16-bit fan tachometers in revisions at least >= 0x03 (Version G). This patch enables 16-bit fan readings on all revisions >= 0x03 just like the it8712, it8716, and it8718 chips. Signed-off-by: Andrew Paprocki Signed-off-by: Jean Delvare --- Documentation/hwmon/it87 | 6 +++--- drivers/hwmon/it87.c | 19 ++++++++++++------- 2 files changed, 15 insertions(+), 10 deletions(-) diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index d931525f3f37..3496b7020e7c 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -6,7 +6,7 @@ Supported chips: Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website - http://www.ite.com.tw/ + http://www.ite.com.tw/product_info/file/pc/IT8705F_V.0.4.1.pdf * IT8712F Prefix: 'it8712' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -97,8 +97,8 @@ The IT8716F, IT8718F and later IT8712F revisions have support for The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This is better (no more fan clock divider mess) but not compatible with the older chips and -revisions. For now, the driver only uses the 16-bit mode on the -late IT8712F, IT8716F and IT8718F. +revisions. The 16-bit tachometer mode is enabled by the driver when one +of the above chips is detected. The IT8726F is just bit enhanced IT8716F with additional hardware for AMD power sequencing. Therefore the chip will appear as IT8716F diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 2a365681f969..30cdb0956779 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -272,9 +272,11 @@ struct it87_data { static inline int has_16bit_fans(const struct it87_data *data) { - /* IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I. - This is the first revision with 16bit tachometer support. */ - return (data->type == it8712 && data->revision >= 0x07) + /* IT8705F Datasheet 0.4.1, 3h == Version G. + IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I. + These are the first revisions with 16bit tachometer support. */ + return (data->type == it87 && data->revision >= 0x03) + || (data->type == it8712 && data->revision >= 0x07) || data->type == it8716 || data->type == it8718; } @@ -1370,10 +1372,13 @@ static void __devinit it87_init_device(struct platform_device *pdev) it87_write_value(data, IT87_REG_FAN_16BIT, tmp | 0x07); } - if (tmp & (1 << 4)) - data->has_fan |= (1 << 3); /* fan4 enabled */ - if (tmp & (1 << 5)) - data->has_fan |= (1 << 4); /* fan5 enabled */ + /* IT8705F only supports three fans. */ + if (data->type != it87) { + if (tmp & (1 << 4)) + data->has_fan |= (1 << 3); /* fan4 enabled */ + if (tmp & (1 << 5)) + data->has_fan |= (1 << 4); /* fan5 enabled */ + } } /* Set current fan mode registers and the default settings for the -- cgit v1.2.3 From 680db0136e0778a0d7e025af7572c6a8d82279e2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 6 Aug 2008 15:14:13 -0700 Subject: pcm_native.c: remove unused label This fixes the warning sound/core/pcm_native.c: In function 'snd_pcm_fasync': sound/core/pcm_native.c:3262: warning: label 'out' defined but not used Signed-off-by: Linus Torvalds --- sound/core/pcm_native.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index c49b9d9e303c..333cff68c150 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -3259,7 +3259,6 @@ static int snd_pcm_fasync(int fd, struct file * file, int on) runtime = substream->runtime; err = fasync_helper(fd, file, on, &runtime->fasync); -out: unlock_kernel(); if (err < 0) return err; -- cgit v1.2.3 From 3fe5c1dd0a8bf3756c447a28a578593176949d1d Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 2 Aug 2008 07:26:12 -0400 Subject: spin off cifs_setattr with unix extensions to its own function Create a new cifs_setattr_unix function to handle a setattr when unix extensions are enabled and have cifs_setattr call it. Also, clean up variable declarations in cifs_setattr. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/inode.c | 157 ++++++++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 119 insertions(+), 38 deletions(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 6d911896d74c..f68d1abe13e6 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1504,30 +1504,138 @@ cifs_set_file_size(struct inode *inode, struct iattr *attrs, return rc; } +static int +cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs) +{ + int rc; + int xid; + char *full_path = NULL; + struct inode *inode = direntry->d_inode; + struct cifsInodeInfo *cifsInode = CIFS_I(inode); + struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); + struct cifsTconInfo *pTcon = cifs_sb->tcon; + struct cifs_unix_set_info_args *args = NULL; + + cFYI(1, ("setattr_unix on file %s attrs->ia_valid=0x%x", + direntry->d_name.name, attrs->ia_valid)); + + xid = GetXid(); + + if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) == 0) { + /* check if we have permission to change attrs */ + rc = inode_change_ok(inode, attrs); + if (rc < 0) + goto out; + else + rc = 0; + } + + full_path = build_path_from_dentry(direntry); + if (full_path == NULL) { + rc = -ENOMEM; + goto out; + } + + if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) { + /* + Flush data before changing file size or changing the last + write time of the file on the server. If the + flush returns error, store it to report later and continue. + BB: This should be smarter. Why bother flushing pages that + will be truncated anyway? Also, should we error out here if + the flush returns error? + */ + rc = filemap_write_and_wait(inode->i_mapping); + if (rc != 0) { + cifsInode->write_behind_rc = rc; + rc = 0; + } + } + + if (attrs->ia_valid & ATTR_SIZE) { + rc = cifs_set_file_size(inode, attrs, xid, full_path); + if (rc != 0) + goto out; + } + + /* skip mode change if it's just for clearing setuid/setgid */ + if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) + attrs->ia_valid &= ~ATTR_MODE; + + args = kmalloc(sizeof(*args), GFP_KERNEL); + if (args == NULL) { + rc = -ENOMEM; + goto out; + } + + /* set up the struct */ + if (attrs->ia_valid & ATTR_MODE) + args->mode = attrs->ia_mode; + else + args->mode = NO_CHANGE_64; + + if (attrs->ia_valid & ATTR_UID) + args->uid = attrs->ia_uid; + else + args->uid = NO_CHANGE_64; + + if (attrs->ia_valid & ATTR_GID) + args->gid = attrs->ia_gid; + else + args->gid = NO_CHANGE_64; + + if (attrs->ia_valid & ATTR_ATIME) + args->atime = cifs_UnixTimeToNT(attrs->ia_atime); + else + args->atime = NO_CHANGE_64; + + if (attrs->ia_valid & ATTR_MTIME) + args->mtime = cifs_UnixTimeToNT(attrs->ia_mtime); + else + args->mtime = NO_CHANGE_64; + + if (attrs->ia_valid & ATTR_CTIME) + args->ctime = cifs_UnixTimeToNT(attrs->ia_ctime); + else + args->ctime = NO_CHANGE_64; + + args->device = 0; + rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path, args, + cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_MAP_SPECIAL_CHR); + + if (!rc) + rc = inode_setattr(inode, attrs); +out: + kfree(args); + kfree(full_path); + FreeXid(xid); + return rc; +} + int cifs_setattr(struct dentry *direntry, struct iattr *attrs) { int xid; - struct cifs_sb_info *cifs_sb; - struct cifsTconInfo *pTcon; + struct inode *inode = direntry->d_inode; + struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); + struct cifsTconInfo *pTcon = cifs_sb->tcon; + struct cifsInodeInfo *cifsInode = CIFS_I(inode); char *full_path = NULL; int rc = -EACCES; FILE_BASIC_INFO time_buf; bool set_time = false; bool set_dosattr = false; __u64 mode = NO_CHANGE_64; - __u64 uid = NO_CHANGE_64; - __u64 gid = NO_CHANGE_64; - struct cifsInodeInfo *cifsInode; - struct inode *inode = direntry->d_inode; + + if (pTcon->unix_ext) + return cifs_setattr_unix(direntry, attrs); xid = GetXid(); cFYI(1, ("setattr on file %s attrs->iavalid 0x%x", direntry->d_name.name, attrs->ia_valid)); - cifs_sb = CIFS_SB(inode->i_sb); - pTcon = cifs_sb->tcon; - if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) == 0) { /* check if we have permission to change attrs */ rc = inode_change_ok(inode, attrs); @@ -1543,7 +1651,6 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) FreeXid(xid); return -ENOMEM; } - cifsInode = CIFS_I(inode); if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) { /* @@ -1574,19 +1681,8 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) * CIFSACL support + proper Windows to Unix idmapping, we may be * able to support this in the future. */ - if (!pTcon->unix_ext && - !(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) { + if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) attrs->ia_valid &= ~(ATTR_UID | ATTR_GID); - } else { - if (attrs->ia_valid & ATTR_UID) { - cFYI(1, ("UID changed to %d", attrs->ia_uid)); - uid = attrs->ia_uid; - } - if (attrs->ia_valid & ATTR_GID) { - cFYI(1, ("GID changed to %d", attrs->ia_gid)); - gid = attrs->ia_gid; - } - } time_buf.Attributes = 0; @@ -1599,22 +1695,7 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) mode = attrs->ia_mode; } - if ((pTcon->unix_ext) - && (attrs->ia_valid & (ATTR_MODE | ATTR_GID | ATTR_UID))) { - struct cifs_unix_set_info_args args = { - .mode = mode, - .uid = uid, - .gid = gid, - .ctime = NO_CHANGE_64, - .atime = NO_CHANGE_64, - .mtime = NO_CHANGE_64, - .device = 0, - }; - rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args, - cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); - } else if (attrs->ia_valid & ATTR_MODE) { + if (attrs->ia_valid & ATTR_MODE) { rc = 0; #ifdef CONFIG_CIFS_EXPERIMENTAL if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) -- cgit v1.2.3 From feb3e20cee25729447e1abdcb40c040b691d457a Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 2 Aug 2008 07:26:12 -0400 Subject: move file time and dos attribute setting logic into new function Break up cifs_setattr further by moving the logic that sets file times and dos attributes into a separate function. This patch also refactors the logic a bit so that when the file is already open then we go ahead and do a SetFileInfo call. SetPathInfo seems to be unreliable when setting times on open files. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/inode.c | 196 +++++++++++++++++++++++++++++++------------------------- 1 file changed, 109 insertions(+), 87 deletions(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index f68d1abe13e6..5c722ea21133 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1504,6 +1504,101 @@ cifs_set_file_size(struct inode *inode, struct iattr *attrs, return rc; } +static int +cifs_set_file_info(struct inode *inode, struct iattr *attrs, int xid, + char *full_path, __u32 dosattr) +{ + int rc; + int oplock = 0; + __u16 netfid; + __u32 netpid; + bool set_time = false; + struct cifsFileInfo *open_file; + struct cifsInodeInfo *cifsInode = CIFS_I(inode); + struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); + struct cifsTconInfo *pTcon = cifs_sb->tcon; + FILE_BASIC_INFO info_buf; + + if (attrs->ia_valid & ATTR_ATIME) { + set_time = true; + info_buf.LastAccessTime = + cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_atime)); + } else + info_buf.LastAccessTime = 0; + + if (attrs->ia_valid & ATTR_MTIME) { + set_time = true; + info_buf.LastWriteTime = + cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_mtime)); + } else + info_buf.LastWriteTime = 0; + + /* + * Samba throws this field away, but windows may actually use it. + * Do not set ctime unless other time stamps are changed explicitly + * (i.e. by utimes()) since we would then have a mix of client and + * server times. + */ + if (set_time && (attrs->ia_valid & ATTR_CTIME)) { + cFYI(1, ("CIFS - CTIME changed")); + info_buf.ChangeTime = + cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_ctime)); + } else + info_buf.ChangeTime = 0; + + info_buf.CreationTime = 0; /* don't change */ + info_buf.Attributes = cpu_to_le32(dosattr); + + /* + * If the file is already open for write, just use that fileid + */ + open_file = find_writable_file(cifsInode); + if (open_file) { + netfid = open_file->netfid; + netpid = open_file->pid; + goto set_via_filehandle; + } + + /* + * NT4 apparently returns success on this call, but it doesn't + * really work. + */ + if (!(pTcon->ses->flags & CIFS_SES_NT4)) { + rc = CIFSSMBSetPathInfo(xid, pTcon, full_path, + &info_buf, cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_MAP_SPECIAL_CHR); + if (rc != -EOPNOTSUPP && rc != -EINVAL) + goto out; + } + + cFYI(1, ("calling SetFileInfo since SetPathInfo for " + "times not supported by this server")); + rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN, + SYNCHRONIZE | FILE_WRITE_ATTRIBUTES, + CREATE_NOT_DIR, &netfid, &oplock, + NULL, cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_MAP_SPECIAL_CHR); + + if (rc != 0) { + if (rc == -EIO) + rc = -EINVAL; + goto out; + } + + netpid = current->tgid; + +set_via_filehandle: + rc = CIFSSMBSetFileInfo(xid, pTcon, &info_buf, netfid, netpid); + if (open_file == NULL) + CIFSSMBClose(xid, pTcon, netfid); + else + atomic_dec(&open_file->wrtPending); +out: + return rc; +} + static int cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs) { @@ -1623,9 +1718,7 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) struct cifsInodeInfo *cifsInode = CIFS_I(inode); char *full_path = NULL; int rc = -EACCES; - FILE_BASIC_INFO time_buf; - bool set_time = false; - bool set_dosattr = false; + __u32 dosattr = 0; __u64 mode = NO_CHANGE_64; if (pTcon->unix_ext) @@ -1684,8 +1777,6 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) attrs->ia_valid &= ~(ATTR_UID | ATTR_GID); - time_buf.Attributes = 0; - /* skip mode change if it's just for clearing setuid/setgid */ if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) attrs->ia_valid &= ~ATTR_MODE; @@ -1704,24 +1795,19 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) #endif if (((mode & S_IWUGO) == 0) && (cifsInode->cifsAttrs & ATTR_READONLY) == 0) { - set_dosattr = true; - time_buf.Attributes = cpu_to_le32(cifsInode->cifsAttrs | - ATTR_READONLY); + + dosattr = cifsInode->cifsAttrs | ATTR_READONLY; + /* fix up mode if we're not using dynperm */ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0) attrs->ia_mode = inode->i_mode & ~S_IWUGO; } else if ((mode & S_IWUGO) && (cifsInode->cifsAttrs & ATTR_READONLY)) { - /* If file is readonly on server, we would - not be able to write to it - so if any write - bit is enabled for user or group or other we - need to at least try to remove r/o dos attr */ - set_dosattr = true; - time_buf.Attributes = cpu_to_le32(cifsInode->cifsAttrs & - (~ATTR_READONLY)); - /* Windows ignores set to zero */ - if (time_buf.Attributes == 0) - time_buf.Attributes |= cpu_to_le32(ATTR_NORMAL); + + dosattr = cifsInode->cifsAttrs & ~ATTR_READONLY; + /* Attributes of 0 are ignored */ + if (dosattr == 0) + dosattr |= ATTR_NORMAL; /* reset local inode permissions to normal */ if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)) { @@ -1739,82 +1825,18 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) } } - if (attrs->ia_valid & ATTR_ATIME) { - set_time = true; - time_buf.LastAccessTime = - cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_atime)); - } else - time_buf.LastAccessTime = 0; - - if (attrs->ia_valid & ATTR_MTIME) { - set_time = true; - time_buf.LastWriteTime = - cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_mtime)); - } else - time_buf.LastWriteTime = 0; - /* Do not set ctime explicitly unless other time - stamps are changed explicitly (i.e. by utime() - since we would then have a mix of client and - server times */ - - if (set_time && (attrs->ia_valid & ATTR_CTIME)) { - set_time = true; - /* Although Samba throws this field away - it may be useful to Windows - but we do - not want to set ctime unless some other - timestamp is changing */ - cFYI(1, ("CIFS - CTIME changed")); - time_buf.ChangeTime = - cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_ctime)); - } else - time_buf.ChangeTime = 0; - - if (set_time || set_dosattr) { - time_buf.CreationTime = 0; /* do not change */ - /* In the future we should experiment - try setting timestamps - via Handle (SetFileInfo) instead of by path */ - if (!(pTcon->ses->flags & CIFS_SES_NT4)) - rc = CIFSSMBSetPathInfo(xid, pTcon, full_path, - &time_buf, cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); - else - rc = -EOPNOTSUPP; - - if (rc == -EOPNOTSUPP) { - int oplock = 0; - __u16 netfid; + if (attrs->ia_valid & (ATTR_MTIME|ATTR_ATIME|ATTR_CTIME) || + ((attrs->ia_valid & ATTR_MODE) && dosattr)) { + rc = cifs_set_file_info(inode, attrs, xid, full_path, dosattr); + /* BB: check for rc = -EOPNOTSUPP and switch to legacy mode */ - cFYI(1, ("calling SetFileInfo since SetPathInfo for " - "times not supported by this server")); - /* BB we could scan to see if we already have it open - and pass in pid of opener to function */ - rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN, - SYNCHRONIZE | FILE_WRITE_ATTRIBUTES, - CREATE_NOT_DIR, &netfid, &oplock, - NULL, cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); - if (rc == 0) { - rc = CIFSSMBSetFileInfo(xid, pTcon, &time_buf, - netfid, current->tgid); - CIFSSMBClose(xid, pTcon, netfid); - } else { - /* BB For even older servers we could convert time_buf - into old DOS style which uses two second - granularity */ - - /* rc = CIFSSMBSetTimesLegacy(xid, pTcon, full_path, - &time_buf, cifs_sb->local_nls); */ - } - } /* Even if error on time set, no sense failing the call if the server would set the time to a reasonable value anyway, and this check ensures that we are not being called from sys_utimes in which case we ought to fail the call back to the user when the server rejects the call */ if ((rc) && (attrs->ia_valid & - (ATTR_MODE | ATTR_GID | ATTR_UID | ATTR_SIZE))) + (ATTR_MODE | ATTR_GID | ATTR_UID | ATTR_SIZE))) rc = 0; } -- cgit v1.2.3 From 0510eeb7367aca017c6320d04cfd9cbc3b5dd992 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 2 Aug 2008 07:26:12 -0400 Subject: turn cifs_setattr into a multiplexor that calls the correct function Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/inode.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 5c722ea21133..28a22092d450 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1709,21 +1709,18 @@ out: return rc; } -int cifs_setattr(struct dentry *direntry, struct iattr *attrs) +static int +cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs) { int xid; struct inode *inode = direntry->d_inode; struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); - struct cifsTconInfo *pTcon = cifs_sb->tcon; struct cifsInodeInfo *cifsInode = CIFS_I(inode); char *full_path = NULL; int rc = -EACCES; __u32 dosattr = 0; __u64 mode = NO_CHANGE_64; - if (pTcon->unix_ext) - return cifs_setattr_unix(direntry, attrs); - xid = GetXid(); cFYI(1, ("setattr on file %s attrs->iavalid 0x%x", @@ -1850,6 +1847,21 @@ cifs_setattr_exit: return rc; } +int +cifs_setattr(struct dentry *direntry, struct iattr *attrs) +{ + struct inode *inode = direntry->d_inode; + struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); + struct cifsTconInfo *pTcon = cifs_sb->tcon; + + if (pTcon->unix_ext) + return cifs_setattr_unix(direntry, attrs); + + return cifs_setattr_nounix(direntry, attrs); + + /* BB: add cifs_setattr_legacy for really old servers */ +} + #if 0 void cifs_delete_inode(struct inode *inode) { -- cgit v1.2.3 From f99e8f277f1172c49ac7b0585aed5b094fe235d4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 6 Aug 2008 17:36:23 -0700 Subject: iSeries: Fix up viotty_ioctl BKL locking fallout The bogus code to call into the n_tty layer got removed in commit 8bc5fb6abb670fa9079cd1994f016a39f99698fe ("Remove bogons from the iSeries console"), but it left a now uninitialized "return ret;" around. Not that this code has ever even compiled since the BKL pushdown, since not only is "ret" no longer initialized, it was never actually declared even originally. Replace it with a "return -ENOIOCTLCMD" Pointed-out-by: Paul Mackerras Acked-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/viocons.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/viocons.c b/drivers/char/viocons.c index f48892ba12f5..7feeb774a101 100644 --- a/drivers/char/viocons.c +++ b/drivers/char/viocons.c @@ -705,7 +705,7 @@ static int viotty_ioctl(struct tty_struct *tty, struct file *file, case KDSKBLED: return 0; } - return ret; + return -ENOIOCTLCMD; } /* -- cgit v1.2.3 From f8d91faff3bb82c7026d6a2a5c97ee7d88bc0229 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 6 Aug 2008 18:14:28 -0700 Subject: of/sparc: remove include of linux/of_platform.h from asm/of_platform.h Now that we have removed all inclusions of asm/of_platform.h, this compatability include can be removed. Signed-off-by: Stephen Rothwell Signed-off-by: David S. Miller --- arch/sparc/include/asm/of_platform.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/sparc/include/asm/of_platform.h b/arch/sparc/include/asm/of_platform.h index 93a262c44022..2348ab90a57c 100644 --- a/arch/sparc/include/asm/of_platform.h +++ b/arch/sparc/include/asm/of_platform.h @@ -13,9 +13,6 @@ * */ -/* This is just here during the transition */ -#include - extern struct bus_type ebus_bus_type; extern struct bus_type sbus_bus_type; -- cgit v1.2.3 From 11d46123bfea068a48483f00518d301f452647fb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 6 Aug 2008 18:30:43 -0700 Subject: ipv4: Fix over-ifdeffing of ip_static_sysctl_init. Noticed by Paulius Zaleckas. Signed-off-by: David S. Miller --- net/ipv4/route.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index eccb61889dfe..16fc6f454a31 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -3223,9 +3223,7 @@ int __init ip_rt_init(void) */ void __init ip_static_sysctl_init(void) { -#ifdef CONFIG_SYSCTL register_sysctl_paths(ipv4_route_path, ipv4_route_table); -#endif } #endif -- cgit v1.2.3 From 685d87f7ccc649ab92b55e18e507a65d0e694eb9 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 6 Aug 2008 19:24:47 -0700 Subject: Revert "pcm_native.c: remove unused label" This reverts commit 680db0136e0778a0d7e025af7572c6a8d82279e2. The label is actually used, but hidden behind CONFIG_SND_DEBUG and the horrible snd_assert() macro. That macro could probably be improved to be along the lines of #define snd_assert(expr, args...) do { if ((void)(expr),0) { args; } } while (0) or similar to make sure that we always both evaluate 'expr' and parse 'args', but while gcc should optimize it all away, I'm too lazy to really verify that. So I'll just admit defeat and will continue to live with the annoying warning. Noted-by: Robert P. J. Day Signed-off-by: Linus "Grr.." Torvalds --- sound/core/pcm_native.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 333cff68c150..c49b9d9e303c 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -3259,6 +3259,7 @@ static int snd_pcm_fasync(int fd, struct file * file, int on) runtime = substream->runtime; err = fasync_helper(fd, file, on, &runtime->fasync); +out: unlock_kernel(); if (err < 0) return err; -- cgit v1.2.3 From f780a9f119caa48088b230836a7fa73d1096de7c Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Wed, 6 Aug 2008 20:14:06 -0700 Subject: mlx4_core: Add ethernet fields to CQE struct Add ethernet-related fields to struct mlx4_cqe so that the mlx4_en ethernet NIC driver can share the same definition. Signed-off-by: Yevgeny Petrilin Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/cq.c | 33 ++++++++++++++++----------------- include/linux/mlx4/cq.h | 36 ++++++++++++++++++++++++------------ 2 files changed, 40 insertions(+), 29 deletions(-) diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c index a1464574bfdd..d0866a3636e2 100644 --- a/drivers/infiniband/hw/mlx4/cq.c +++ b/drivers/infiniband/hw/mlx4/cq.c @@ -515,17 +515,17 @@ static void mlx4_ib_handle_error_cqe(struct mlx4_err_cqe *cqe, wc->vendor_err = cqe->vendor_err_syndrome; } -static int mlx4_ib_ipoib_csum_ok(__be32 status, __be16 checksum) +static int mlx4_ib_ipoib_csum_ok(__be16 status, __be16 checksum) { - return ((status & cpu_to_be32(MLX4_CQE_IPOIB_STATUS_IPV4 | - MLX4_CQE_IPOIB_STATUS_IPV4F | - MLX4_CQE_IPOIB_STATUS_IPV4OPT | - MLX4_CQE_IPOIB_STATUS_IPV6 | - MLX4_CQE_IPOIB_STATUS_IPOK)) == - cpu_to_be32(MLX4_CQE_IPOIB_STATUS_IPV4 | - MLX4_CQE_IPOIB_STATUS_IPOK)) && - (status & cpu_to_be32(MLX4_CQE_IPOIB_STATUS_UDP | - MLX4_CQE_IPOIB_STATUS_TCP)) && + return ((status & cpu_to_be16(MLX4_CQE_STATUS_IPV4 | + MLX4_CQE_STATUS_IPV4F | + MLX4_CQE_STATUS_IPV4OPT | + MLX4_CQE_STATUS_IPV6 | + MLX4_CQE_STATUS_IPOK)) == + cpu_to_be16(MLX4_CQE_STATUS_IPV4 | + MLX4_CQE_STATUS_IPOK)) && + (status & cpu_to_be16(MLX4_CQE_STATUS_UDP | + MLX4_CQE_STATUS_TCP)) && checksum == cpu_to_be16(0xffff); } @@ -582,17 +582,17 @@ repoll: } if (!*cur_qp || - (be32_to_cpu(cqe->my_qpn) & 0xffffff) != (*cur_qp)->mqp.qpn) { + (be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK) != (*cur_qp)->mqp.qpn) { /* * We do not have to take the QP table lock here, * because CQs will be locked while QPs are removed * from the table. */ mqp = __mlx4_qp_lookup(to_mdev(cq->ibcq.device)->dev, - be32_to_cpu(cqe->my_qpn)); + be32_to_cpu(cqe->vlan_my_qpn)); if (unlikely(!mqp)) { printk(KERN_WARNING "CQ %06x with entry for unknown QPN %06x\n", - cq->mcq.cqn, be32_to_cpu(cqe->my_qpn) & 0xffffff); + cq->mcq.cqn, be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK); return -EINVAL; } @@ -692,14 +692,13 @@ repoll: } wc->slid = be16_to_cpu(cqe->rlid); - wc->sl = cqe->sl >> 4; + wc->sl = be16_to_cpu(cqe->sl_vid >> 12); g_mlpath_rqpn = be32_to_cpu(cqe->g_mlpath_rqpn); wc->src_qp = g_mlpath_rqpn & 0xffffff; wc->dlid_path_bits = (g_mlpath_rqpn >> 24) & 0x7f; wc->wc_flags |= g_mlpath_rqpn & 0x80000000 ? IB_WC_GRH : 0; wc->pkey_index = be32_to_cpu(cqe->immed_rss_invalid) & 0x7f; - wc->csum_ok = mlx4_ib_ipoib_csum_ok(cqe->ipoib_status, - cqe->checksum); + wc->csum_ok = mlx4_ib_ipoib_csum_ok(cqe->status, cqe->checksum); } return 0; @@ -767,7 +766,7 @@ void __mlx4_ib_cq_clean(struct mlx4_ib_cq *cq, u32 qpn, struct mlx4_ib_srq *srq) */ while ((int) --prod_index - (int) cq->mcq.cons_index >= 0) { cqe = get_cqe(cq, prod_index & cq->ibcq.cqe); - if ((be32_to_cpu(cqe->my_qpn) & 0xffffff) == qpn) { + if ((be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK) == qpn) { if (srq && !(cqe->owner_sr_opcode & MLX4_CQE_IS_SEND_MASK)) mlx4_ib_free_srq_wqe(srq, be16_to_cpu(cqe->wqe_index)); ++nfreed; diff --git a/include/linux/mlx4/cq.h b/include/linux/mlx4/cq.h index 071cf96cf01f..6f65b2c8bb89 100644 --- a/include/linux/mlx4/cq.h +++ b/include/linux/mlx4/cq.h @@ -39,17 +39,18 @@ #include struct mlx4_cqe { - __be32 my_qpn; + __be32 vlan_my_qpn; __be32 immed_rss_invalid; __be32 g_mlpath_rqpn; - u8 sl; - u8 reserved1; + __be16 sl_vid; __be16 rlid; - __be32 ipoib_status; + __be16 status; + u8 ipv6_ext_mask; + u8 badfcs_enc; __be32 byte_cnt; __be16 wqe_index; __be16 checksum; - u8 reserved2[3]; + u8 reserved[3]; u8 owner_sr_opcode; }; @@ -63,6 +64,11 @@ struct mlx4_err_cqe { u8 owner_sr_opcode; }; +enum { + MLX4_CQE_VLAN_PRESENT_MASK = 1 << 29, + MLX4_CQE_QPN_MASK = 0xffffff, +}; + enum { MLX4_CQE_OWNER_MASK = 0x80, MLX4_CQE_IS_SEND_MASK = 0x40, @@ -86,13 +92,19 @@ enum { }; enum { - MLX4_CQE_IPOIB_STATUS_IPV4 = 1 << 22, - MLX4_CQE_IPOIB_STATUS_IPV4F = 1 << 23, - MLX4_CQE_IPOIB_STATUS_IPV6 = 1 << 24, - MLX4_CQE_IPOIB_STATUS_IPV4OPT = 1 << 25, - MLX4_CQE_IPOIB_STATUS_TCP = 1 << 26, - MLX4_CQE_IPOIB_STATUS_UDP = 1 << 27, - MLX4_CQE_IPOIB_STATUS_IPOK = 1 << 28, + MLX4_CQE_STATUS_IPV4 = 1 << 6, + MLX4_CQE_STATUS_IPV4F = 1 << 7, + MLX4_CQE_STATUS_IPV6 = 1 << 8, + MLX4_CQE_STATUS_IPV4OPT = 1 << 9, + MLX4_CQE_STATUS_TCP = 1 << 10, + MLX4_CQE_STATUS_UDP = 1 << 11, + MLX4_CQE_STATUS_IPOK = 1 << 12, +}; + +enum { + MLX4_CQE_LLC = 1, + MLX4_CQE_SNAP = 1 << 1, + MLX4_CQE_BAD_FCS = 1 << 4, }; static inline void mlx4_cq_arm(struct mlx4_cq *cq, u32 cmd, -- cgit v1.2.3 From 58750139001bae11a1f9b074f3a9c774fecf5ba8 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 31 Jul 2008 14:38:07 +1000 Subject: Move all of include/asm-m68knommu to arch/m68knommu/include/asm. With the current kbuild infrastructure in place no other changes are required for this to work. Signed-off-by: Greg Ungerer --- arch/m68knommu/include/asm/Kbuild | 1 + arch/m68knommu/include/asm/MC68328.h | 1266 ++++++++++++++ arch/m68knommu/include/asm/MC68332.h | 152 ++ arch/m68knommu/include/asm/MC68EZ328.h | 1253 +++++++++++++ arch/m68knommu/include/asm/MC68VZ328.h | 1349 ++++++++++++++ arch/m68knommu/include/asm/a.out.h | 1 + arch/m68knommu/include/asm/anchor.h | 112 ++ arch/m68knommu/include/asm/atomic.h | 155 ++ arch/m68knommu/include/asm/auxvec.h | 4 + arch/m68knommu/include/asm/bitops.h | 336 ++++ arch/m68knommu/include/asm/bootinfo.h | 2 + arch/m68knommu/include/asm/bootstd.h | 132 ++ arch/m68knommu/include/asm/bug.h | 4 + arch/m68knommu/include/asm/bugs.h | 16 + arch/m68knommu/include/asm/byteorder.h | 27 + arch/m68knommu/include/asm/cache.h | 12 + arch/m68knommu/include/asm/cachectl.h | 1 + arch/m68knommu/include/asm/cacheflush.h | 84 + arch/m68knommu/include/asm/checksum.h | 132 ++ arch/m68knommu/include/asm/coldfire.h | 51 + arch/m68knommu/include/asm/commproc.h | 703 ++++++++ arch/m68knommu/include/asm/cputime.h | 6 + arch/m68knommu/include/asm/current.h | 24 + arch/m68knommu/include/asm/dbg.h | 6 + arch/m68knommu/include/asm/delay.h | 76 + arch/m68knommu/include/asm/device.h | 7 + arch/m68knommu/include/asm/div64.h | 1 + arch/m68knommu/include/asm/dma-mapping.h | 10 + arch/m68knommu/include/asm/dma.h | 494 ++++++ arch/m68knommu/include/asm/elf.h | 110 ++ arch/m68knommu/include/asm/elia.h | 41 + arch/m68knommu/include/asm/emergency-restart.h | 6 + arch/m68knommu/include/asm/entry.h | 182 ++ arch/m68knommu/include/asm/errno.h | 1 + arch/m68knommu/include/asm/fb.h | 12 + arch/m68knommu/include/asm/fcntl.h | 1 + arch/m68knommu/include/asm/flat.h | 17 + arch/m68knommu/include/asm/fpu.h | 21 + arch/m68knommu/include/asm/futex.h | 6 + arch/m68knommu/include/asm/hardirq.h | 27 + arch/m68knommu/include/asm/hw_irq.h | 4 + arch/m68knommu/include/asm/hwtest.h | 1 + arch/m68knommu/include/asm/io.h | 194 ++ arch/m68knommu/include/asm/ioctl.h | 1 + arch/m68knommu/include/asm/ioctls.h | 1 + arch/m68knommu/include/asm/ipcbuf.h | 1 + arch/m68knommu/include/asm/irq.h | 26 + arch/m68knommu/include/asm/irq_regs.h | 1 + arch/m68knommu/include/asm/kdebug.h | 1 + arch/m68knommu/include/asm/kmap_types.h | 21 + arch/m68knommu/include/asm/linkage.h | 1 + arch/m68knommu/include/asm/local.h | 6 + arch/m68knommu/include/asm/m5206sim.h | 131 ++ arch/m68knommu/include/asm/m520xsim.h | 63 + arch/m68knommu/include/asm/m523xsim.h | 45 + arch/m68knommu/include/asm/m5249sim.h | 209 +++ arch/m68knommu/include/asm/m5272sim.h | 78 + arch/m68knommu/include/asm/m527xsim.h | 74 + arch/m68knommu/include/asm/m528xsim.h | 159 ++ arch/m68knommu/include/asm/m5307sim.h | 181 ++ arch/m68knommu/include/asm/m532xsim.h | 2238 ++++++++++++++++++++++++ arch/m68knommu/include/asm/m5407sim.h | 157 ++ arch/m68knommu/include/asm/m68360.h | 13 + arch/m68knommu/include/asm/m68360_enet.h | 177 ++ arch/m68knommu/include/asm/m68360_pram.h | 431 +++++ arch/m68knommu/include/asm/m68360_quicc.h | 362 ++++ arch/m68knommu/include/asm/m68360_regs.h | 408 +++++ arch/m68knommu/include/asm/machdep.h | 26 + arch/m68knommu/include/asm/math-emu.h | 1 + arch/m68knommu/include/asm/mc146818rtc.h | 9 + arch/m68knommu/include/asm/mcfcache.h | 150 ++ arch/m68knommu/include/asm/mcfdma.h | 144 ++ arch/m68knommu/include/asm/mcfmbus.h | 77 + arch/m68knommu/include/asm/mcfne.h | 325 ++++ arch/m68knommu/include/asm/mcfpci.h | 119 ++ arch/m68knommu/include/asm/mcfpit.h | 64 + arch/m68knommu/include/asm/mcfsim.h | 126 ++ arch/m68knommu/include/asm/mcfsmc.h | 187 ++ arch/m68knommu/include/asm/mcftimer.h | 80 + arch/m68knommu/include/asm/mcfuart.h | 216 +++ arch/m68knommu/include/asm/mcfwdebug.h | 118 ++ arch/m68knommu/include/asm/md.h | 1 + arch/m68knommu/include/asm/mman.h | 1 + arch/m68knommu/include/asm/mmu.h | 11 + arch/m68knommu/include/asm/mmu_context.h | 33 + arch/m68knommu/include/asm/module.h | 11 + arch/m68knommu/include/asm/movs.h | 1 + arch/m68knommu/include/asm/msgbuf.h | 1 + arch/m68knommu/include/asm/mutex.h | 9 + arch/m68knommu/include/asm/nettel.h | 108 ++ arch/m68knommu/include/asm/openprom.h | 1 + arch/m68knommu/include/asm/oplib.h | 1 + arch/m68knommu/include/asm/page.h | 77 + arch/m68knommu/include/asm/page_offset.h | 5 + arch/m68knommu/include/asm/param.h | 22 + arch/m68knommu/include/asm/pci.h | 29 + arch/m68knommu/include/asm/percpu.h | 6 + arch/m68knommu/include/asm/pgalloc.h | 8 + arch/m68knommu/include/asm/pgtable.h | 70 + arch/m68knommu/include/asm/poll.h | 1 + arch/m68knommu/include/asm/posix_types.h | 1 + arch/m68knommu/include/asm/processor.h | 143 ++ arch/m68knommu/include/asm/ptrace.h | 87 + arch/m68knommu/include/asm/quicc_simple.h | 52 + arch/m68knommu/include/asm/resource.h | 1 + arch/m68knommu/include/asm/rtc.h | 1 + arch/m68knommu/include/asm/scatterlist.h | 22 + arch/m68knommu/include/asm/sections.h | 7 + arch/m68knommu/include/asm/segment.h | 51 + arch/m68knommu/include/asm/sembuf.h | 1 + arch/m68knommu/include/asm/setup.h | 10 + arch/m68knommu/include/asm/shm.h | 1 + arch/m68knommu/include/asm/shmbuf.h | 1 + arch/m68knommu/include/asm/shmparam.h | 1 + arch/m68knommu/include/asm/sigcontext.h | 17 + arch/m68knommu/include/asm/siginfo.h | 6 + arch/m68knommu/include/asm/signal.h | 159 ++ arch/m68knommu/include/asm/smp.h | 1 + arch/m68knommu/include/asm/socket.h | 1 + arch/m68knommu/include/asm/sockios.h | 1 + arch/m68knommu/include/asm/spinlock.h | 1 + arch/m68knommu/include/asm/stat.h | 1 + arch/m68knommu/include/asm/statfs.h | 1 + arch/m68knommu/include/asm/string.h | 126 ++ arch/m68knommu/include/asm/system.h | 324 ++++ arch/m68knommu/include/asm/termbits.h | 1 + arch/m68knommu/include/asm/termios.h | 1 + arch/m68knommu/include/asm/thread_info.h | 98 ++ arch/m68knommu/include/asm/timex.h | 23 + arch/m68knommu/include/asm/tlb.h | 1 + arch/m68knommu/include/asm/tlbflush.h | 55 + arch/m68knommu/include/asm/topology.h | 6 + arch/m68knommu/include/asm/traps.h | 154 ++ arch/m68knommu/include/asm/types.h | 1 + arch/m68knommu/include/asm/uaccess.h | 181 ++ arch/m68knommu/include/asm/ucontext.h | 32 + arch/m68knommu/include/asm/unaligned.h | 25 + arch/m68knommu/include/asm/unistd.h | 366 ++++ arch/m68knommu/include/asm/user.h | 1 + include/asm-m68knommu/Kbuild | 1 - include/asm-m68knommu/MC68328.h | 1266 -------------- include/asm-m68knommu/MC68332.h | 152 -- include/asm-m68knommu/MC68EZ328.h | 1253 ------------- include/asm-m68knommu/MC68VZ328.h | 1349 -------------- include/asm-m68knommu/a.out.h | 1 - include/asm-m68knommu/anchor.h | 112 -- include/asm-m68knommu/atomic.h | 155 -- include/asm-m68knommu/auxvec.h | 4 - include/asm-m68knommu/bitops.h | 336 ---- include/asm-m68knommu/bootinfo.h | 2 - include/asm-m68knommu/bootstd.h | 132 -- include/asm-m68knommu/bug.h | 4 - include/asm-m68knommu/bugs.h | 16 - include/asm-m68knommu/byteorder.h | 27 - include/asm-m68knommu/cache.h | 12 - include/asm-m68knommu/cachectl.h | 1 - include/asm-m68knommu/cacheflush.h | 84 - include/asm-m68knommu/checksum.h | 132 -- include/asm-m68knommu/coldfire.h | 51 - include/asm-m68knommu/commproc.h | 703 -------- include/asm-m68knommu/cputime.h | 6 - include/asm-m68knommu/current.h | 24 - include/asm-m68knommu/dbg.h | 6 - include/asm-m68knommu/delay.h | 76 - include/asm-m68knommu/device.h | 7 - include/asm-m68knommu/div64.h | 1 - include/asm-m68knommu/dma-mapping.h | 10 - include/asm-m68knommu/dma.h | 494 ------ include/asm-m68knommu/elf.h | 110 -- include/asm-m68knommu/elia.h | 41 - include/asm-m68knommu/emergency-restart.h | 6 - include/asm-m68knommu/entry.h | 182 -- include/asm-m68knommu/errno.h | 1 - include/asm-m68knommu/fb.h | 12 - include/asm-m68knommu/fcntl.h | 1 - include/asm-m68knommu/flat.h | 17 - include/asm-m68knommu/fpu.h | 21 - include/asm-m68knommu/futex.h | 6 - include/asm-m68knommu/hardirq.h | 27 - include/asm-m68knommu/hw_irq.h | 4 - include/asm-m68knommu/hwtest.h | 1 - include/asm-m68knommu/io.h | 194 -- include/asm-m68knommu/ioctl.h | 1 - include/asm-m68knommu/ioctls.h | 1 - include/asm-m68knommu/ipcbuf.h | 1 - include/asm-m68knommu/irq.h | 26 - include/asm-m68knommu/irq_regs.h | 1 - include/asm-m68knommu/kdebug.h | 1 - include/asm-m68knommu/kmap_types.h | 21 - include/asm-m68knommu/linkage.h | 1 - include/asm-m68knommu/local.h | 6 - include/asm-m68knommu/m5206sim.h | 131 -- include/asm-m68knommu/m520xsim.h | 63 - include/asm-m68knommu/m523xsim.h | 45 - include/asm-m68knommu/m5249sim.h | 209 --- include/asm-m68knommu/m5272sim.h | 78 - include/asm-m68knommu/m527xsim.h | 74 - include/asm-m68knommu/m528xsim.h | 159 -- include/asm-m68knommu/m5307sim.h | 181 -- include/asm-m68knommu/m532xsim.h | 2238 ------------------------ include/asm-m68knommu/m5407sim.h | 157 -- include/asm-m68knommu/m68360.h | 13 - include/asm-m68knommu/m68360_enet.h | 177 -- include/asm-m68knommu/m68360_pram.h | 431 ----- include/asm-m68knommu/m68360_quicc.h | 362 ---- include/asm-m68knommu/m68360_regs.h | 408 ----- include/asm-m68knommu/machdep.h | 26 - include/asm-m68knommu/math-emu.h | 1 - include/asm-m68knommu/mc146818rtc.h | 9 - include/asm-m68knommu/mcfcache.h | 150 -- include/asm-m68knommu/mcfdma.h | 144 -- include/asm-m68knommu/mcfmbus.h | 77 - include/asm-m68knommu/mcfne.h | 325 ---- include/asm-m68knommu/mcfpci.h | 119 -- include/asm-m68knommu/mcfpit.h | 64 - include/asm-m68knommu/mcfsim.h | 126 -- include/asm-m68knommu/mcfsmc.h | 187 -- include/asm-m68knommu/mcftimer.h | 80 - include/asm-m68knommu/mcfuart.h | 216 --- include/asm-m68knommu/mcfwdebug.h | 118 -- include/asm-m68knommu/md.h | 1 - include/asm-m68knommu/mman.h | 1 - include/asm-m68knommu/mmu.h | 11 - include/asm-m68knommu/mmu_context.h | 33 - include/asm-m68knommu/module.h | 11 - include/asm-m68knommu/movs.h | 1 - include/asm-m68knommu/msgbuf.h | 1 - include/asm-m68knommu/mutex.h | 9 - include/asm-m68knommu/nettel.h | 108 -- include/asm-m68knommu/openprom.h | 1 - include/asm-m68knommu/oplib.h | 1 - include/asm-m68knommu/page.h | 77 - include/asm-m68knommu/page_offset.h | 5 - include/asm-m68knommu/param.h | 22 - include/asm-m68knommu/pci.h | 29 - include/asm-m68knommu/percpu.h | 6 - include/asm-m68knommu/pgalloc.h | 8 - include/asm-m68knommu/pgtable.h | 70 - include/asm-m68knommu/poll.h | 1 - include/asm-m68knommu/posix_types.h | 1 - include/asm-m68knommu/processor.h | 143 -- include/asm-m68knommu/ptrace.h | 87 - include/asm-m68knommu/quicc_simple.h | 52 - include/asm-m68knommu/resource.h | 1 - include/asm-m68knommu/rtc.h | 1 - include/asm-m68knommu/scatterlist.h | 22 - include/asm-m68knommu/sections.h | 7 - include/asm-m68knommu/segment.h | 51 - include/asm-m68knommu/sembuf.h | 1 - include/asm-m68knommu/setup.h | 10 - include/asm-m68knommu/shm.h | 1 - include/asm-m68knommu/shmbuf.h | 1 - include/asm-m68knommu/shmparam.h | 1 - include/asm-m68knommu/sigcontext.h | 17 - include/asm-m68knommu/siginfo.h | 6 - include/asm-m68knommu/signal.h | 159 -- include/asm-m68knommu/smp.h | 1 - include/asm-m68knommu/socket.h | 1 - include/asm-m68knommu/sockios.h | 1 - include/asm-m68knommu/spinlock.h | 1 - include/asm-m68knommu/stat.h | 1 - include/asm-m68knommu/statfs.h | 1 - include/asm-m68knommu/string.h | 126 -- include/asm-m68knommu/system.h | 324 ---- include/asm-m68knommu/termbits.h | 1 - include/asm-m68knommu/termios.h | 1 - include/asm-m68knommu/thread_info.h | 98 -- include/asm-m68knommu/timex.h | 23 - include/asm-m68knommu/tlb.h | 1 - include/asm-m68knommu/tlbflush.h | 55 - include/asm-m68knommu/topology.h | 6 - include/asm-m68knommu/traps.h | 154 -- include/asm-m68knommu/types.h | 1 - include/asm-m68knommu/uaccess.h | 181 -- include/asm-m68knommu/ucontext.h | 32 - include/asm-m68knommu/unaligned.h | 25 - include/asm-m68knommu/unistd.h | 366 ---- include/asm-m68knommu/user.h | 1 - 278 files changed, 15825 insertions(+), 15825 deletions(-) create mode 100644 arch/m68knommu/include/asm/Kbuild create mode 100644 arch/m68knommu/include/asm/MC68328.h create mode 100644 arch/m68knommu/include/asm/MC68332.h create mode 100644 arch/m68knommu/include/asm/MC68EZ328.h create mode 100644 arch/m68knommu/include/asm/MC68VZ328.h create mode 100644 arch/m68knommu/include/asm/a.out.h create mode 100644 arch/m68knommu/include/asm/anchor.h create mode 100644 arch/m68knommu/include/asm/atomic.h create mode 100644 arch/m68knommu/include/asm/auxvec.h create mode 100644 arch/m68knommu/include/asm/bitops.h create mode 100644 arch/m68knommu/include/asm/bootinfo.h create mode 100644 arch/m68knommu/include/asm/bootstd.h create mode 100644 arch/m68knommu/include/asm/bug.h create mode 100644 arch/m68knommu/include/asm/bugs.h create mode 100644 arch/m68knommu/include/asm/byteorder.h create mode 100644 arch/m68knommu/include/asm/cache.h create mode 100644 arch/m68knommu/include/asm/cachectl.h create mode 100644 arch/m68knommu/include/asm/cacheflush.h create mode 100644 arch/m68knommu/include/asm/checksum.h create mode 100644 arch/m68knommu/include/asm/coldfire.h create mode 100644 arch/m68knommu/include/asm/commproc.h create mode 100644 arch/m68knommu/include/asm/cputime.h create mode 100644 arch/m68knommu/include/asm/current.h create mode 100644 arch/m68knommu/include/asm/dbg.h create mode 100644 arch/m68knommu/include/asm/delay.h create mode 100644 arch/m68knommu/include/asm/device.h create mode 100644 arch/m68knommu/include/asm/div64.h create mode 100644 arch/m68knommu/include/asm/dma-mapping.h create mode 100644 arch/m68knommu/include/asm/dma.h create mode 100644 arch/m68knommu/include/asm/elf.h create mode 100644 arch/m68knommu/include/asm/elia.h create mode 100644 arch/m68knommu/include/asm/emergency-restart.h create mode 100644 arch/m68knommu/include/asm/entry.h create mode 100644 arch/m68knommu/include/asm/errno.h create mode 100644 arch/m68knommu/include/asm/fb.h create mode 100644 arch/m68knommu/include/asm/fcntl.h create mode 100644 arch/m68knommu/include/asm/flat.h create mode 100644 arch/m68knommu/include/asm/fpu.h create mode 100644 arch/m68knommu/include/asm/futex.h create mode 100644 arch/m68knommu/include/asm/hardirq.h create mode 100644 arch/m68knommu/include/asm/hw_irq.h create mode 100644 arch/m68knommu/include/asm/hwtest.h create mode 100644 arch/m68knommu/include/asm/io.h create mode 100644 arch/m68knommu/include/asm/ioctl.h create mode 100644 arch/m68knommu/include/asm/ioctls.h create mode 100644 arch/m68knommu/include/asm/ipcbuf.h create mode 100644 arch/m68knommu/include/asm/irq.h create mode 100644 arch/m68knommu/include/asm/irq_regs.h create mode 100644 arch/m68knommu/include/asm/kdebug.h create mode 100644 arch/m68knommu/include/asm/kmap_types.h create mode 100644 arch/m68knommu/include/asm/linkage.h create mode 100644 arch/m68knommu/include/asm/local.h create mode 100644 arch/m68knommu/include/asm/m5206sim.h create mode 100644 arch/m68knommu/include/asm/m520xsim.h create mode 100644 arch/m68knommu/include/asm/m523xsim.h create mode 100644 arch/m68knommu/include/asm/m5249sim.h create mode 100644 arch/m68knommu/include/asm/m5272sim.h create mode 100644 arch/m68knommu/include/asm/m527xsim.h create mode 100644 arch/m68knommu/include/asm/m528xsim.h create mode 100644 arch/m68knommu/include/asm/m5307sim.h create mode 100644 arch/m68knommu/include/asm/m532xsim.h create mode 100644 arch/m68knommu/include/asm/m5407sim.h create mode 100644 arch/m68knommu/include/asm/m68360.h create mode 100644 arch/m68knommu/include/asm/m68360_enet.h create mode 100644 arch/m68knommu/include/asm/m68360_pram.h create mode 100644 arch/m68knommu/include/asm/m68360_quicc.h create mode 100644 arch/m68knommu/include/asm/m68360_regs.h create mode 100644 arch/m68knommu/include/asm/machdep.h create mode 100644 arch/m68knommu/include/asm/math-emu.h create mode 100644 arch/m68knommu/include/asm/mc146818rtc.h create mode 100644 arch/m68knommu/include/asm/mcfcache.h create mode 100644 arch/m68knommu/include/asm/mcfdma.h create mode 100644 arch/m68knommu/include/asm/mcfmbus.h create mode 100644 arch/m68knommu/include/asm/mcfne.h create mode 100644 arch/m68knommu/include/asm/mcfpci.h create mode 100644 arch/m68knommu/include/asm/mcfpit.h create mode 100644 arch/m68knommu/include/asm/mcfsim.h create mode 100644 arch/m68knommu/include/asm/mcfsmc.h create mode 100644 arch/m68knommu/include/asm/mcftimer.h create mode 100644 arch/m68knommu/include/asm/mcfuart.h create mode 100644 arch/m68knommu/include/asm/mcfwdebug.h create mode 100644 arch/m68knommu/include/asm/md.h create mode 100644 arch/m68knommu/include/asm/mman.h create mode 100644 arch/m68knommu/include/asm/mmu.h create mode 100644 arch/m68knommu/include/asm/mmu_context.h create mode 100644 arch/m68knommu/include/asm/module.h create mode 100644 arch/m68knommu/include/asm/movs.h create mode 100644 arch/m68knommu/include/asm/msgbuf.h create mode 100644 arch/m68knommu/include/asm/mutex.h create mode 100644 arch/m68knommu/include/asm/nettel.h create mode 100644 arch/m68knommu/include/asm/openprom.h create mode 100644 arch/m68knommu/include/asm/oplib.h create mode 100644 arch/m68knommu/include/asm/page.h create mode 100644 arch/m68knommu/include/asm/page_offset.h create mode 100644 arch/m68knommu/include/asm/param.h create mode 100644 arch/m68knommu/include/asm/pci.h create mode 100644 arch/m68knommu/include/asm/percpu.h create mode 100644 arch/m68knommu/include/asm/pgalloc.h create mode 100644 arch/m68knommu/include/asm/pgtable.h create mode 100644 arch/m68knommu/include/asm/poll.h create mode 100644 arch/m68knommu/include/asm/posix_types.h create mode 100644 arch/m68knommu/include/asm/processor.h create mode 100644 arch/m68knommu/include/asm/ptrace.h create mode 100644 arch/m68knommu/include/asm/quicc_simple.h create mode 100644 arch/m68knommu/include/asm/resource.h create mode 100644 arch/m68knommu/include/asm/rtc.h create mode 100644 arch/m68knommu/include/asm/scatterlist.h create mode 100644 arch/m68knommu/include/asm/sections.h create mode 100644 arch/m68knommu/include/asm/segment.h create mode 100644 arch/m68knommu/include/asm/sembuf.h create mode 100644 arch/m68knommu/include/asm/setup.h create mode 100644 arch/m68knommu/include/asm/shm.h create mode 100644 arch/m68knommu/include/asm/shmbuf.h create mode 100644 arch/m68knommu/include/asm/shmparam.h create mode 100644 arch/m68knommu/include/asm/sigcontext.h create mode 100644 arch/m68knommu/include/asm/siginfo.h create mode 100644 arch/m68knommu/include/asm/signal.h create mode 100644 arch/m68knommu/include/asm/smp.h create mode 100644 arch/m68knommu/include/asm/socket.h create mode 100644 arch/m68knommu/include/asm/sockios.h create mode 100644 arch/m68knommu/include/asm/spinlock.h create mode 100644 arch/m68knommu/include/asm/stat.h create mode 100644 arch/m68knommu/include/asm/statfs.h create mode 100644 arch/m68knommu/include/asm/string.h create mode 100644 arch/m68knommu/include/asm/system.h create mode 100644 arch/m68knommu/include/asm/termbits.h create mode 100644 arch/m68knommu/include/asm/termios.h create mode 100644 arch/m68knommu/include/asm/thread_info.h create mode 100644 arch/m68knommu/include/asm/timex.h create mode 100644 arch/m68knommu/include/asm/tlb.h create mode 100644 arch/m68knommu/include/asm/tlbflush.h create mode 100644 arch/m68knommu/include/asm/topology.h create mode 100644 arch/m68knommu/include/asm/traps.h create mode 100644 arch/m68knommu/include/asm/types.h create mode 100644 arch/m68knommu/include/asm/uaccess.h create mode 100644 arch/m68knommu/include/asm/ucontext.h create mode 100644 arch/m68knommu/include/asm/unaligned.h create mode 100644 arch/m68knommu/include/asm/unistd.h create mode 100644 arch/m68knommu/include/asm/user.h delete mode 100644 include/asm-m68knommu/Kbuild delete mode 100644 include/asm-m68knommu/MC68328.h delete mode 100644 include/asm-m68knommu/MC68332.h delete mode 100644 include/asm-m68knommu/MC68EZ328.h delete mode 100644 include/asm-m68knommu/MC68VZ328.h delete mode 100644 include/asm-m68knommu/a.out.h delete mode 100644 include/asm-m68knommu/anchor.h delete mode 100644 include/asm-m68knommu/atomic.h delete mode 100644 include/asm-m68knommu/auxvec.h delete mode 100644 include/asm-m68knommu/bitops.h delete mode 100644 include/asm-m68knommu/bootinfo.h delete mode 100644 include/asm-m68knommu/bootstd.h delete mode 100644 include/asm-m68knommu/bug.h delete mode 100644 include/asm-m68knommu/bugs.h delete mode 100644 include/asm-m68knommu/byteorder.h delete mode 100644 include/asm-m68knommu/cache.h delete mode 100644 include/asm-m68knommu/cachectl.h delete mode 100644 include/asm-m68knommu/cacheflush.h delete mode 100644 include/asm-m68knommu/checksum.h delete mode 100644 include/asm-m68knommu/coldfire.h delete mode 100644 include/asm-m68knommu/commproc.h delete mode 100644 include/asm-m68knommu/cputime.h delete mode 100644 include/asm-m68knommu/current.h delete mode 100644 include/asm-m68knommu/dbg.h delete mode 100644 include/asm-m68knommu/delay.h delete mode 100644 include/asm-m68knommu/device.h delete mode 100644 include/asm-m68knommu/div64.h delete mode 100644 include/asm-m68knommu/dma-mapping.h delete mode 100644 include/asm-m68knommu/dma.h delete mode 100644 include/asm-m68knommu/elf.h delete mode 100644 include/asm-m68knommu/elia.h delete mode 100644 include/asm-m68knommu/emergency-restart.h delete mode 100644 include/asm-m68knommu/entry.h delete mode 100644 include/asm-m68knommu/errno.h delete mode 100644 include/asm-m68knommu/fb.h delete mode 100644 include/asm-m68knommu/fcntl.h delete mode 100644 include/asm-m68knommu/flat.h delete mode 100644 include/asm-m68knommu/fpu.h delete mode 100644 include/asm-m68knommu/futex.h delete mode 100644 include/asm-m68knommu/hardirq.h delete mode 100644 include/asm-m68knommu/hw_irq.h delete mode 100644 include/asm-m68knommu/hwtest.h delete mode 100644 include/asm-m68knommu/io.h delete mode 100644 include/asm-m68knommu/ioctl.h delete mode 100644 include/asm-m68knommu/ioctls.h delete mode 100644 include/asm-m68knommu/ipcbuf.h delete mode 100644 include/asm-m68knommu/irq.h delete mode 100644 include/asm-m68knommu/irq_regs.h delete mode 100644 include/asm-m68knommu/kdebug.h delete mode 100644 include/asm-m68knommu/kmap_types.h delete mode 100644 include/asm-m68knommu/linkage.h delete mode 100644 include/asm-m68knommu/local.h delete mode 100644 include/asm-m68knommu/m5206sim.h delete mode 100644 include/asm-m68knommu/m520xsim.h delete mode 100644 include/asm-m68knommu/m523xsim.h delete mode 100644 include/asm-m68knommu/m5249sim.h delete mode 100644 include/asm-m68knommu/m5272sim.h delete mode 100644 include/asm-m68knommu/m527xsim.h delete mode 100644 include/asm-m68knommu/m528xsim.h delete mode 100644 include/asm-m68knommu/m5307sim.h delete mode 100644 include/asm-m68knommu/m532xsim.h delete mode 100644 include/asm-m68knommu/m5407sim.h delete mode 100644 include/asm-m68knommu/m68360.h delete mode 100644 include/asm-m68knommu/m68360_enet.h delete mode 100644 include/asm-m68knommu/m68360_pram.h delete mode 100644 include/asm-m68knommu/m68360_quicc.h delete mode 100644 include/asm-m68knommu/m68360_regs.h delete mode 100644 include/asm-m68knommu/machdep.h delete mode 100644 include/asm-m68knommu/math-emu.h delete mode 100644 include/asm-m68knommu/mc146818rtc.h delete mode 100644 include/asm-m68knommu/mcfcache.h delete mode 100644 include/asm-m68knommu/mcfdma.h delete mode 100644 include/asm-m68knommu/mcfmbus.h delete mode 100644 include/asm-m68knommu/mcfne.h delete mode 100644 include/asm-m68knommu/mcfpci.h delete mode 100644 include/asm-m68knommu/mcfpit.h delete mode 100644 include/asm-m68knommu/mcfsim.h delete mode 100644 include/asm-m68knommu/mcfsmc.h delete mode 100644 include/asm-m68knommu/mcftimer.h delete mode 100644 include/asm-m68knommu/mcfuart.h delete mode 100644 include/asm-m68knommu/mcfwdebug.h delete mode 100644 include/asm-m68knommu/md.h delete mode 100644 include/asm-m68knommu/mman.h delete mode 100644 include/asm-m68knommu/mmu.h delete mode 100644 include/asm-m68knommu/mmu_context.h delete mode 100644 include/asm-m68knommu/module.h delete mode 100644 include/asm-m68knommu/movs.h delete mode 100644 include/asm-m68knommu/msgbuf.h delete mode 100644 include/asm-m68knommu/mutex.h delete mode 100644 include/asm-m68knommu/nettel.h delete mode 100644 include/asm-m68knommu/openprom.h delete mode 100644 include/asm-m68knommu/oplib.h delete mode 100644 include/asm-m68knommu/page.h delete mode 100644 include/asm-m68knommu/page_offset.h delete mode 100644 include/asm-m68knommu/param.h delete mode 100644 include/asm-m68knommu/pci.h delete mode 100644 include/asm-m68knommu/percpu.h delete mode 100644 include/asm-m68knommu/pgalloc.h delete mode 100644 include/asm-m68knommu/pgtable.h delete mode 100644 include/asm-m68knommu/poll.h delete mode 100644 include/asm-m68knommu/posix_types.h delete mode 100644 include/asm-m68knommu/processor.h delete mode 100644 include/asm-m68knommu/ptrace.h delete mode 100644 include/asm-m68knommu/quicc_simple.h delete mode 100644 include/asm-m68knommu/resource.h delete mode 100644 include/asm-m68knommu/rtc.h delete mode 100644 include/asm-m68knommu/scatterlist.h delete mode 100644 include/asm-m68knommu/sections.h delete mode 100644 include/asm-m68knommu/segment.h delete mode 100644 include/asm-m68knommu/sembuf.h delete mode 100644 include/asm-m68knommu/setup.h delete mode 100644 include/asm-m68knommu/shm.h delete mode 100644 include/asm-m68knommu/shmbuf.h delete mode 100644 include/asm-m68knommu/shmparam.h delete mode 100644 include/asm-m68knommu/sigcontext.h delete mode 100644 include/asm-m68knommu/siginfo.h delete mode 100644 include/asm-m68knommu/signal.h delete mode 100644 include/asm-m68knommu/smp.h delete mode 100644 include/asm-m68knommu/socket.h delete mode 100644 include/asm-m68knommu/sockios.h delete mode 100644 include/asm-m68knommu/spinlock.h delete mode 100644 include/asm-m68knommu/stat.h delete mode 100644 include/asm-m68knommu/statfs.h delete mode 100644 include/asm-m68knommu/string.h delete mode 100644 include/asm-m68knommu/system.h delete mode 100644 include/asm-m68knommu/termbits.h delete mode 100644 include/asm-m68knommu/termios.h delete mode 100644 include/asm-m68knommu/thread_info.h delete mode 100644 include/asm-m68knommu/timex.h delete mode 100644 include/asm-m68knommu/tlb.h delete mode 100644 include/asm-m68knommu/tlbflush.h delete mode 100644 include/asm-m68knommu/topology.h delete mode 100644 include/asm-m68knommu/traps.h delete mode 100644 include/asm-m68knommu/types.h delete mode 100644 include/asm-m68knommu/uaccess.h delete mode 100644 include/asm-m68knommu/ucontext.h delete mode 100644 include/asm-m68knommu/unaligned.h delete mode 100644 include/asm-m68knommu/unistd.h delete mode 100644 include/asm-m68knommu/user.h diff --git a/arch/m68knommu/include/asm/Kbuild b/arch/m68knommu/include/asm/Kbuild new file mode 100644 index 000000000000..c68e1680da01 --- /dev/null +++ b/arch/m68knommu/include/asm/Kbuild @@ -0,0 +1 @@ +include include/asm-generic/Kbuild.asm diff --git a/arch/m68knommu/include/asm/MC68328.h b/arch/m68knommu/include/asm/MC68328.h new file mode 100644 index 000000000000..a337e56d09bf --- /dev/null +++ b/arch/m68knommu/include/asm/MC68328.h @@ -0,0 +1,1266 @@ + +/* include/asm-m68knommu/MC68328.h: '328 control registers + * + * Copyright (C) 1999 Vladimir Gurevich + * Bear & Hare Software, Inc. + * + * Based on include/asm-m68knommu/MC68332.h + * Copyright (C) 1998 Kenneth Albanowski , + * + */ + +#ifndef _MC68328_H_ +#define _MC68328_H_ + +#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) +#define WORD_REF(addr) (*((volatile unsigned short*)addr)) +#define LONG_REF(addr) (*((volatile unsigned long*)addr)) + +#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) +#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) + +/********** + * + * 0xFFFFF0xx -- System Control + * + **********/ + +/* + * System Control Register (SCR) + */ +#define SCR_ADDR 0xfffff000 +#define SCR BYTE_REF(SCR_ADDR) + +#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ +#define SCR_DMAP 0x04 /* Double Map */ +#define SCR_SO 0x08 /* Supervisor Only */ +#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ +#define SCR_PRV 0x20 /* Privilege Violation */ +#define SCR_WPV 0x40 /* Write Protect Violation */ +#define SCR_BETO 0x80 /* Bus-Error TimeOut */ + +/* + * Mask Revision Register + */ +#define MRR_ADDR 0xfffff004 +#define MRR LONG_REF(MRR_ADDR) + +/********** + * + * 0xFFFFF1xx -- Chip-Select logic + * + **********/ + +/********** + * + * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control + * + **********/ + +/* + * Group Base Address Registers + */ +#define GRPBASEA_ADDR 0xfffff100 +#define GRPBASEB_ADDR 0xfffff102 +#define GRPBASEC_ADDR 0xfffff104 +#define GRPBASED_ADDR 0xfffff106 + +#define GRPBASEA WORD_REF(GRPBASEA_ADDR) +#define GRPBASEB WORD_REF(GRPBASEB_ADDR) +#define GRPBASEC WORD_REF(GRPBASEC_ADDR) +#define GRPBASED WORD_REF(GRPBASED_ADDR) + +#define GRPBASE_V 0x0001 /* Valid */ +#define GRPBASE_GBA_MASK 0xfff0 /* Group Base Address (bits 31-20) */ + +/* + * Group Base Address Mask Registers + */ +#define GRPMASKA_ADDR 0xfffff108 +#define GRPMASKB_ADDR 0xfffff10a +#define GRPMASKC_ADDR 0xfffff10c +#define GRPMASKD_ADDR 0xfffff10e + +#define GRPMASKA WORD_REF(GRPMASKA_ADDR) +#define GRPMASKB WORD_REF(GRPMASKB_ADDR) +#define GRPMASKC WORD_REF(GRPMASKC_ADDR) +#define GRPMASKD WORD_REF(GRPMASKD_ADDR) + +#define GRMMASK_GMA_MASK 0xfffff0 /* Group Base Mask (bits 31-20) */ + +/* + * Chip-Select Option Registers (group A) + */ +#define CSA0_ADDR 0xfffff110 +#define CSA1_ADDR 0xfffff114 +#define CSA2_ADDR 0xfffff118 +#define CSA3_ADDR 0xfffff11c + +#define CSA0 LONG_REF(CSA0_ADDR) +#define CSA1 LONG_REF(CSA1_ADDR) +#define CSA2 LONG_REF(CSA2_ADDR) +#define CSA3 LONG_REF(CSA3_ADDR) + +#define CSA_WAIT_MASK 0x00000007 /* Wait State Selection */ +#define CSA_WAIT_SHIFT 0 +#define CSA_RO 0x00000008 /* Read-Only */ +#define CSA_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ +#define CSA_AM_SHIFT 8 +#define CSA_BUSW 0x00010000 /* Bus Width Select */ +#define CSA_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ +#define CSA_AC_SHIFT 24 + +/* + * Chip-Select Option Registers (group B) + */ +#define CSB0_ADDR 0xfffff120 +#define CSB1_ADDR 0xfffff124 +#define CSB2_ADDR 0xfffff128 +#define CSB3_ADDR 0xfffff12c + +#define CSB0 LONG_REF(CSB0_ADDR) +#define CSB1 LONG_REF(CSB1_ADDR) +#define CSB2 LONG_REF(CSB2_ADDR) +#define CSB3 LONG_REF(CSB3_ADDR) + +#define CSB_WAIT_MASK 0x00000007 /* Wait State Selection */ +#define CSB_WAIT_SHIFT 0 +#define CSB_RO 0x00000008 /* Read-Only */ +#define CSB_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ +#define CSB_AM_SHIFT 8 +#define CSB_BUSW 0x00010000 /* Bus Width Select */ +#define CSB_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ +#define CSB_AC_SHIFT 24 + +/* + * Chip-Select Option Registers (group C) + */ +#define CSC0_ADDR 0xfffff130 +#define CSC1_ADDR 0xfffff134 +#define CSC2_ADDR 0xfffff138 +#define CSC3_ADDR 0xfffff13c + +#define CSC0 LONG_REF(CSC0_ADDR) +#define CSC1 LONG_REF(CSC1_ADDR) +#define CSC2 LONG_REF(CSC2_ADDR) +#define CSC3 LONG_REF(CSC3_ADDR) + +#define CSC_WAIT_MASK 0x00000007 /* Wait State Selection */ +#define CSC_WAIT_SHIFT 0 +#define CSC_RO 0x00000008 /* Read-Only */ +#define CSC_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ +#define CSC_AM_SHIFT 4 +#define CSC_BUSW 0x00010000 /* Bus Width Select */ +#define CSC_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ +#define CSC_AC_SHIFT 20 + +/* + * Chip-Select Option Registers (group D) + */ +#define CSD0_ADDR 0xfffff140 +#define CSD1_ADDR 0xfffff144 +#define CSD2_ADDR 0xfffff148 +#define CSD3_ADDR 0xfffff14c + +#define CSD0 LONG_REF(CSD0_ADDR) +#define CSD1 LONG_REF(CSD1_ADDR) +#define CSD2 LONG_REF(CSD2_ADDR) +#define CSD3 LONG_REF(CSD3_ADDR) + +#define CSD_WAIT_MASK 0x00000007 /* Wait State Selection */ +#define CSD_WAIT_SHIFT 0 +#define CSD_RO 0x00000008 /* Read-Only */ +#define CSD_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ +#define CSD_AM_SHIFT 4 +#define CSD_BUSW 0x00010000 /* Bus Width Select */ +#define CSD_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ +#define CSD_AC_SHIFT 20 + +/********** + * + * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control + * + **********/ + +/* + * PLL Control Register + */ +#define PLLCR_ADDR 0xfffff200 +#define PLLCR WORD_REF(PLLCR_ADDR) + +#define PLLCR_DISPLL 0x0008 /* Disable PLL */ +#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ +#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ +#define PLLCR_SYSCLK_SEL_SHIFT 8 +#define PLLCR_PIXCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ +#define PLLCR_PIXCLK_SEL_SHIFT 11 + +/* 'EZ328-compatible definitions */ +#define PLLCR_LCDCLK_SEL_MASK PLLCR_PIXCLK_SEL_MASK +#define PLLCR_LCDCLK_SEL_SHIFT PLLCR_PIXCLK_SEL_SHIFT + +/* + * PLL Frequency Select Register + */ +#define PLLFSR_ADDR 0xfffff202 +#define PLLFSR WORD_REF(PLLFSR_ADDR) + +#define PLLFSR_PC_MASK 0x00ff /* P Count */ +#define PLLFSR_PC_SHIFT 0 +#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ +#define PLLFSR_QC_SHIFT 8 +#define PLLFSR_PROT 0x4000 /* Protect P & Q */ +#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ + +/* + * Power Control Register + */ +#define PCTRL_ADDR 0xfffff207 +#define PCTRL BYTE_REF(PCTRL_ADDR) + +#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ +#define PCTRL_WIDTH_SHIFT 0 +#define PCTRL_STOP 0x40 /* Enter power-save mode immediately */ +#define PCTRL_PCEN 0x80 /* Power Control Enable */ + +/********** + * + * 0xFFFFF3xx -- Interrupt Controller + * + **********/ + +/* + * Interrupt Vector Register + */ +#define IVR_ADDR 0xfffff300 +#define IVR BYTE_REF(IVR_ADDR) + +#define IVR_VECTOR_MASK 0xF8 + +/* + * Interrupt control Register + */ +#define ICR_ADRR 0xfffff302 +#define ICR WORD_REF(ICR_ADDR) + +#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ +#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ +#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ +#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ +#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ +#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ +#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ +#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ + +/* + * Interrupt Mask Register + */ +#define IMR_ADDR 0xfffff304 +#define IMR LONG_REF(IMR_ADDR) + +/* + * Define the names for bit positions first. This is useful for + * request_irq + */ +#define SPIM_IRQ_NUM 0 /* SPI Master interrupt */ +#define TMR2_IRQ_NUM 1 /* Timer 2 interrupt */ +#define UART_IRQ_NUM 2 /* UART interrupt */ +#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ +#define RTC_IRQ_NUM 4 /* RTC interrupt */ +#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ +#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */ +#define INT0_IRQ_NUM 8 /* External INT0 */ +#define INT1_IRQ_NUM 9 /* External INT1 */ +#define INT2_IRQ_NUM 10 /* External INT2 */ +#define INT3_IRQ_NUM 11 /* External INT3 */ +#define INT4_IRQ_NUM 12 /* External INT4 */ +#define INT5_IRQ_NUM 13 /* External INT5 */ +#define INT6_IRQ_NUM 14 /* External INT6 */ +#define INT7_IRQ_NUM 15 /* External INT7 */ +#define IRQ1_IRQ_NUM 16 /* IRQ1 */ +#define IRQ2_IRQ_NUM 17 /* IRQ2 */ +#define IRQ3_IRQ_NUM 18 /* IRQ3 */ +#define IRQ6_IRQ_NUM 19 /* IRQ6 */ +#define PEN_IRQ_NUM 20 /* Pen Interrupt */ +#define SPIS_IRQ_NUM 21 /* SPI Slave Interrupt */ +#define TMR1_IRQ_NUM 22 /* Timer 1 interrupt */ +#define IRQ7_IRQ_NUM 23 /* IRQ7 */ + +/* '328-compatible definitions */ +#define SPI_IRQ_NUM SPIM_IRQ_NUM +#define TMR_IRQ_NUM TMR1_IRQ_NUM + +/* + * Here go the bitmasks themselves + */ +#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */ +#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */ +#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ +#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ +#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ +#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ +#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ +#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ +#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ +#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ +#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ +#define IMR_MINT4 (1 << INT4_IRQ_NUM) /* Mask External INT4 */ +#define IMR_MINT5 (1 << INT5_IRQ_NUM) /* Mask External INT5 */ +#define IMR_MINT6 (1 << INT6_IRQ_NUM) /* Mask External INT6 */ +#define IMR_MINT7 (1 << INT7_IRQ_NUM) /* Mask External INT7 */ +#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ +#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ +#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ +#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ +#define IMR_MPEN (1 << PEN_IRQ_NUM) /* Mask Pen Interrupt */ +#define IMR_MSPIS (1 << SPIS_IRQ_NUM) /* Mask SPI Slave Interrupt */ +#define IMR_MTMR1 (1 << TMR1_IRQ_NUM) /* Mask Timer 1 interrupt */ +#define IMR_MIRQ7 (1 << IRQ7_IRQ_NUM) /* Mask IRQ7 */ + +/* 'EZ328-compatible definitions */ +#define IMR_MSPI IMR_MSPIM +#define IMR_MTMR IMR_MTMR1 + +/* + * Interrupt Wake-Up Enable Register + */ +#define IWR_ADDR 0xfffff308 +#define IWR LONG_REF(IWR_ADDR) + +#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ +#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ +#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ +#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ +#define IWR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ +#define IWR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ +#define IWR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ +#define IWR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ +#define IWR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ +#define IWR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ +#define IWR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ +#define IWR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ +#define IWR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ +#define IWR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ +#define IWR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ +#define IWR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ +#define IWR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ +#define IWR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ +#define IWR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ +#define IWR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ +#define IWR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ +#define IWR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ +#define IWR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ + +/* + * Interrupt Status Register + */ +#define ISR_ADDR 0xfffff30c +#define ISR LONG_REF(ISR_ADDR) + +#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ +#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ +#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ +#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ +#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ +#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ +#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ +#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ +#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ +#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ +#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ +#define ISR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ +#define ISR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ +#define ISR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ +#define ISR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ +#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ +#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ +#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ +#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ +#define ISR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ +#define ISR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ +#define ISR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ +#define ISR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ + +/* 'EZ328-compatible definitions */ +#define ISR_SPI ISR_SPIM +#define ISR_TMR ISR_TMR1 + +/* + * Interrupt Pending Register + */ +#define IPR_ADDR 0xfffff310 +#define IPR LONG_REF(IPR_ADDR) + +#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ +#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ +#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ +#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ +#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ +#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ +#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ +#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ +#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ +#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ +#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ +#define IPR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ +#define IPR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ +#define IPR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ +#define IPR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ +#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ +#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ +#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ +#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ +#define IPR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ +#define IPR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ +#define IPR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ +#define IPR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ + +/* 'EZ328-compatible definitions */ +#define IPR_SPI IPR_SPIM +#define IPR_TMR IPR_TMR1 + +/********** + * + * 0xFFFFF4xx -- Parallel Ports + * + **********/ + +/* + * Port A + */ +#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ +#define PADATA_ADDR 0xfffff401 /* Port A data register */ +#define PASEL_ADDR 0xfffff403 /* Port A Select register */ + +#define PADIR BYTE_REF(PADIR_ADDR) +#define PADATA BYTE_REF(PADATA_ADDR) +#define PASEL BYTE_REF(PASEL_ADDR) + +#define PA(x) (1 << (x)) +#define PA_A(x) PA((x) - 16) /* This is specific to PA only! */ + +#define PA_A16 PA(0) /* Use A16 as PA(0) */ +#define PA_A17 PA(1) /* Use A17 as PA(1) */ +#define PA_A18 PA(2) /* Use A18 as PA(2) */ +#define PA_A19 PA(3) /* Use A19 as PA(3) */ +#define PA_A20 PA(4) /* Use A20 as PA(4) */ +#define PA_A21 PA(5) /* Use A21 as PA(5) */ +#define PA_A22 PA(6) /* Use A22 as PA(6) */ +#define PA_A23 PA(7) /* Use A23 as PA(7) */ + +/* + * Port B + */ +#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ +#define PBDATA_ADDR 0xfffff409 /* Port B data register */ +#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ + +#define PBDIR BYTE_REF(PBDIR_ADDR) +#define PBDATA BYTE_REF(PBDATA_ADDR) +#define PBSEL BYTE_REF(PBSEL_ADDR) + +#define PB(x) (1 << (x)) +#define PB_D(x) PB(x) /* This is specific to port B only */ + +#define PB_D0 PB(0) /* Use D0 as PB(0) */ +#define PB_D1 PB(1) /* Use D1 as PB(1) */ +#define PB_D2 PB(2) /* Use D2 as PB(2) */ +#define PB_D3 PB(3) /* Use D3 as PB(3) */ +#define PB_D4 PB(4) /* Use D4 as PB(4) */ +#define PB_D5 PB(5) /* Use D5 as PB(5) */ +#define PB_D6 PB(6) /* Use D6 as PB(6) */ +#define PB_D7 PB(7) /* Use D7 as PB(7) */ + +/* + * Port C + */ +#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ +#define PCDATA_ADDR 0xfffff411 /* Port C data register */ +#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ + +#define PCDIR BYTE_REF(PCDIR_ADDR) +#define PCDATA BYTE_REF(PCDATA_ADDR) +#define PCSEL BYTE_REF(PCSEL_ADDR) + +#define PC(x) (1 << (x)) + +#define PC_WE PC(6) /* Use WE as PC(6) */ +#define PC_DTACK PC(5) /* Use DTACK as PC(5) */ +#define PC_IRQ7 PC(4) /* Use IRQ7 as PC(4) */ +#define PC_LDS PC(2) /* Use LDS as PC(2) */ +#define PC_UDS PC(1) /* Use UDS as PC(1) */ +#define PC_MOCLK PC(0) /* Use MOCLK as PC(0) */ + +/* + * Port D + */ +#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ +#define PDDATA_ADDR 0xfffff419 /* Port D data register */ +#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ +#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ +#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ +#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ + +#define PDDIR BYTE_REF(PDDIR_ADDR) +#define PDDATA BYTE_REF(PDDATA_ADDR) +#define PDPUEN BYTE_REF(PDPUEN_ADDR) +#define PDPOL BYTE_REF(PDPOL_ADDR) +#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) +#define PDIQEG BYTE_REF(PDIQEG_ADDR) + +#define PD(x) (1 << (x)) +#define PD_KB(x) PD(x) /* This is specific for Port D only */ + +#define PD_KB0 PD(0) /* Use KB0 as PD(0) */ +#define PD_KB1 PD(1) /* Use KB1 as PD(1) */ +#define PD_KB2 PD(2) /* Use KB2 as PD(2) */ +#define PD_KB3 PD(3) /* Use KB3 as PD(3) */ +#define PD_KB4 PD(4) /* Use KB4 as PD(4) */ +#define PD_KB5 PD(5) /* Use KB5 as PD(5) */ +#define PD_KB6 PD(6) /* Use KB6 as PD(6) */ +#define PD_KB7 PD(7) /* Use KB7 as PD(7) */ + +/* + * Port E + */ +#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ +#define PEDATA_ADDR 0xfffff421 /* Port E data register */ +#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ +#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ + +#define PEDIR BYTE_REF(PEDIR_ADDR) +#define PEDATA BYTE_REF(PEDATA_ADDR) +#define PEPUEN BYTE_REF(PEPUEN_ADDR) +#define PESEL BYTE_REF(PESEL_ADDR) + +#define PE(x) (1 << (x)) + +#define PE_CSA1 PE(1) /* Use CSA1 as PE(1) */ +#define PE_CSA2 PE(2) /* Use CSA2 as PE(2) */ +#define PE_CSA3 PE(3) /* Use CSA3 as PE(3) */ +#define PE_CSB0 PE(4) /* Use CSB0 as PE(4) */ +#define PE_CSB1 PE(5) /* Use CSB1 as PE(5) */ +#define PE_CSB2 PE(6) /* Use CSB2 as PE(6) */ +#define PE_CSB3 PE(7) /* Use CSB3 as PE(7) */ + +/* + * Port F + */ +#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ +#define PFDATA_ADDR 0xfffff429 /* Port F data register */ +#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ +#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ + +#define PFDIR BYTE_REF(PFDIR_ADDR) +#define PFDATA BYTE_REF(PFDATA_ADDR) +#define PFPUEN BYTE_REF(PFPUEN_ADDR) +#define PFSEL BYTE_REF(PFSEL_ADDR) + +#define PF(x) (1 << (x)) +#define PF_A(x) PF((x) - 24) /* This is Port F specific only */ + +#define PF_A24 PF(0) /* Use A24 as PF(0) */ +#define PF_A25 PF(1) /* Use A25 as PF(1) */ +#define PF_A26 PF(2) /* Use A26 as PF(2) */ +#define PF_A27 PF(3) /* Use A27 as PF(3) */ +#define PF_A28 PF(4) /* Use A28 as PF(4) */ +#define PF_A29 PF(5) /* Use A29 as PF(5) */ +#define PF_A30 PF(6) /* Use A30 as PF(6) */ +#define PF_A31 PF(7) /* Use A31 as PF(7) */ + +/* + * Port G + */ +#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ +#define PGDATA_ADDR 0xfffff431 /* Port G data register */ +#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ +#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ + +#define PGDIR BYTE_REF(PGDIR_ADDR) +#define PGDATA BYTE_REF(PGDATA_ADDR) +#define PGPUEN BYTE_REF(PGPUEN_ADDR) +#define PGSEL BYTE_REF(PGSEL_ADDR) + +#define PG(x) (1 << (x)) + +#define PG_UART_TXD PG(0) /* Use UART_TXD as PG(0) */ +#define PG_UART_RXD PG(1) /* Use UART_RXD as PG(1) */ +#define PG_PWMOUT PG(2) /* Use PWMOUT as PG(2) */ +#define PG_TOUT2 PG(3) /* Use TOUT2 as PG(3) */ +#define PG_TIN2 PG(4) /* Use TIN2 as PG(4) */ +#define PG_TOUT1 PG(5) /* Use TOUT1 as PG(5) */ +#define PG_TIN1 PG(6) /* Use TIN1 as PG(6) */ +#define PG_RTCOUT PG(7) /* Use RTCOUT as PG(7) */ + +/* + * Port J + */ +#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ +#define PJDATA_ADDR 0xfffff439 /* Port J data register */ +#define PJSEL_ADDR 0xfffff43b /* Port J Select Register */ + +#define PJDIR BYTE_REF(PJDIR_ADDR) +#define PJDATA BYTE_REF(PJDATA_ADDR) +#define PJSEL BYTE_REF(PJSEL_ADDR) + +#define PJ(x) (1 << (x)) + +#define PJ_CSD3 PJ(7) /* Use CSD3 as PJ(7) */ + +/* + * Port K + */ +#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */ +#define PKDATA_ADDR 0xfffff441 /* Port K data register */ +#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enable reg */ +#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */ + +#define PKDIR BYTE_REF(PKDIR_ADDR) +#define PKDATA BYTE_REF(PKDATA_ADDR) +#define PKPUEN BYTE_REF(PKPUEN_ADDR) +#define PKSEL BYTE_REF(PKSEL_ADDR) + +#define PK(x) (1 << (x)) + +/* + * Port M + */ +#define PMDIR_ADDR 0xfffff438 /* Port M direction reg */ +#define PMDATA_ADDR 0xfffff439 /* Port M data register */ +#define PMPUEN_ADDR 0xfffff43a /* Port M Pull-Up enable reg */ +#define PMSEL_ADDR 0xfffff43b /* Port M Select Register */ + +#define PMDIR BYTE_REF(PMDIR_ADDR) +#define PMDATA BYTE_REF(PMDATA_ADDR) +#define PMPUEN BYTE_REF(PMPUEN_ADDR) +#define PMSEL BYTE_REF(PMSEL_ADDR) + +#define PM(x) (1 << (x)) + +/********** + * + * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) + * + **********/ + +/* + * PWM Control Register + */ +#define PWMC_ADDR 0xfffff500 +#define PWMC WORD_REF(PWMC_ADDR) + +#define PWMC_CLKSEL_MASK 0x0007 /* Clock Selection */ +#define PWMC_CLKSEL_SHIFT 0 +#define PWMC_PWMEN 0x0010 /* Enable PWM */ +#define PMNC_POL 0x0020 /* PWM Output Bit Polarity */ +#define PWMC_PIN 0x0080 /* Current PWM output pin status */ +#define PWMC_LOAD 0x0100 /* Force a new period */ +#define PWMC_IRQEN 0x4000 /* Interrupt Request Enable */ +#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ + +/* 'EZ328-compatible definitions */ +#define PWMC_EN PWMC_PWMEN + +/* + * PWM Period Register + */ +#define PWMP_ADDR 0xfffff502 +#define PWMP WORD_REF(PWMP_ADDR) + +/* + * PWM Width Register + */ +#define PWMW_ADDR 0xfffff504 +#define PWMW WORD_REF(PWMW_ADDR) + +/* + * PWM Counter Register + */ +#define PWMCNT_ADDR 0xfffff506 +#define PWMCNT WORD_REF(PWMCNT_ADDR) + +/********** + * + * 0xFFFFF6xx -- General-Purpose Timers + * + **********/ + +/* + * Timer Unit 1 and 2 Control Registers + */ +#define TCTL1_ADDR 0xfffff600 +#define TCTL1 WORD_REF(TCTL1_ADDR) +#define TCTL2_ADDR 0xfffff60c +#define TCTL2 WORD_REF(TCTL2_ADDR) + +#define TCTL_TEN 0x0001 /* Timer Enable */ +#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ +#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ +#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ +#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ +#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ +#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ +#define TCTL_IRQEN 0x0010 /* IRQ Enable */ +#define TCTL_OM 0x0020 /* Output Mode */ +#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ +#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ +#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ +#define TCTL_FRR 0x0010 /* Free-Run Mode */ + +/* 'EZ328-compatible definitions */ +#define TCTL_ADDR TCTL1_ADDR +#define TCTL TCTL1 + +/* + * Timer Unit 1 and 2 Prescaler Registers + */ +#define TPRER1_ADDR 0xfffff602 +#define TPRER1 WORD_REF(TPRER1_ADDR) +#define TPRER2_ADDR 0xfffff60e +#define TPRER2 WORD_REF(TPRER2_ADDR) + +/* 'EZ328-compatible definitions */ +#define TPRER_ADDR TPRER1_ADDR +#define TPRER TPRER1 + +/* + * Timer Unit 1 and 2 Compare Registers + */ +#define TCMP1_ADDR 0xfffff604 +#define TCMP1 WORD_REF(TCMP1_ADDR) +#define TCMP2_ADDR 0xfffff610 +#define TCMP2 WORD_REF(TCMP2_ADDR) + +/* 'EZ328-compatible definitions */ +#define TCMP_ADDR TCMP1_ADDR +#define TCMP TCMP1 + +/* + * Timer Unit 1 and 2 Capture Registers + */ +#define TCR1_ADDR 0xfffff606 +#define TCR1 WORD_REF(TCR1_ADDR) +#define TCR2_ADDR 0xfffff612 +#define TCR2 WORD_REF(TCR2_ADDR) + +/* 'EZ328-compatible definitions */ +#define TCR_ADDR TCR1_ADDR +#define TCR TCR1 + +/* + * Timer Unit 1 and 2 Counter Registers + */ +#define TCN1_ADDR 0xfffff608 +#define TCN1 WORD_REF(TCN1_ADDR) +#define TCN2_ADDR 0xfffff614 +#define TCN2 WORD_REF(TCN2_ADDR) + +/* 'EZ328-compatible definitions */ +#define TCN_ADDR TCN1_ADDR +#define TCN TCN + +/* + * Timer Unit 1 and 2 Status Registers + */ +#define TSTAT1_ADDR 0xfffff60a +#define TSTAT1 WORD_REF(TSTAT1_ADDR) +#define TSTAT2_ADDR 0xfffff616 +#define TSTAT2 WORD_REF(TSTAT2_ADDR) + +#define TSTAT_COMP 0x0001 /* Compare Event occurred */ +#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ + +/* 'EZ328-compatible definitions */ +#define TSTAT_ADDR TSTAT1_ADDR +#define TSTAT TSTAT1 + +/* + * Watchdog Compare Register + */ +#define WRR_ADDR 0xfffff61a +#define WRR WORD_REF(WRR_ADDR) + +/* + * Watchdog Counter Register + */ +#define WCN_ADDR 0xfffff61c +#define WCN WORD_REF(WCN_ADDR) + +/* + * Watchdog Control and Status Register + */ +#define WCSR_ADDR 0xfffff618 +#define WCSR WORD_REF(WCSR_ADDR) + +#define WCSR_WDEN 0x0001 /* Watchdog Enable */ +#define WCSR_FI 0x0002 /* Forced Interrupt (instead of SW reset)*/ +#define WCSR_WRST 0x0004 /* Watchdog Reset */ + +/********** + * + * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS) + * + **********/ + +/* + * SPI Slave Register + */ +#define SPISR_ADDR 0xfffff700 +#define SPISR WORD_REF(SPISR_ADDR) + +#define SPISR_DATA_ADDR 0xfffff701 +#define SPISR_DATA BYTE_REF(SPISR_DATA_ADDR) + +#define SPISR_DATA_MASK 0x00ff /* Shifted data from the external device */ +#define SPISR_DATA_SHIFT 0 +#define SPISR_SPISEN 0x0100 /* SPIS module enable */ +#define SPISR_POL 0x0200 /* SPSCLK polarity control */ +#define SPISR_PHA 0x0400 /* Phase relationship between SPSCLK & SPSRxD */ +#define SPISR_OVWR 0x0800 /* Data buffer has been overwritten */ +#define SPISR_DATARDY 0x1000 /* Data ready */ +#define SPISR_ENPOL 0x2000 /* Enable Polarity */ +#define SPISR_IRQEN 0x4000 /* SPIS IRQ Enable */ +#define SPISR_SPISIRQ 0x8000 /* SPIS IRQ posted */ + +/********** + * + * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) + * + **********/ + +/* + * SPIM Data Register + */ +#define SPIMDATA_ADDR 0xfffff800 +#define SPIMDATA WORD_REF(SPIMDATA_ADDR) + +/* + * SPIM Control/Status Register + */ +#define SPIMCONT_ADDR 0xfffff802 +#define SPIMCONT WORD_REF(SPIMCONT_ADDR) + +#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ +#define SPIMCONT_BIT_COUNT_SHIFT 0 +#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ +#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ +#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ +#define SPIMCONT_SPIMIRQ 0x0080 /* Interrupt Request */ +#define SPIMCONT_XCH 0x0100 /* Exchange */ +#define SPIMCONT_RSPIMEN 0x0200 /* Enable SPIM */ +#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ +#define SPIMCONT_DATA_RATE_SHIFT 13 + +/* 'EZ328-compatible definitions */ +#define SPIMCONT_IRQ SPIMCONT_SPIMIRQ +#define SPIMCONT_ENABLE SPIMCONT_SPIMEN +/********** + * + * 0xFFFFF9xx -- UART + * + **********/ + +/* + * UART Status/Control Register + */ +#define USTCNT_ADDR 0xfffff900 +#define USTCNT WORD_REF(USTCNT_ADDR) + +#define USTCNT_TXAVAILEN 0x0001 /* Transmitter Available Int Enable */ +#define USTCNT_TXHALFEN 0x0002 /* Transmitter Half Empty Int Enable */ +#define USTCNT_TXEMPTYEN 0x0004 /* Transmitter Empty Int Enable */ +#define USTCNT_RXREADYEN 0x0008 /* Receiver Ready Interrupt Enable */ +#define USTCNT_RXHALFEN 0x0010 /* Receiver Half-Full Int Enable */ +#define USTCNT_RXFULLEN 0x0020 /* Receiver Full Interrupt Enable */ +#define USTCNT_CTSDELTAEN 0x0040 /* CTS Delta Interrupt Enable */ +#define USTCNT_GPIODELTAEN 0x0080 /* Old Data Interrupt Enable */ +#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ +#define USTCNT_STOP 0x0200 /* Stop bit transmission */ +#define USTCNT_ODD_EVEN 0x0400 /* Odd Parity */ +#define USTCNT_PARITYEN 0x0800 /* Parity Enable */ +#define USTCNT_CLKMODE 0x1000 /* Clock Mode Select */ +#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ +#define USTCNT_RXEN 0x4000 /* Receiver Enable */ +#define USTCNT_UARTEN 0x8000 /* UART Enable */ + +/* 'EZ328-compatible definitions */ +#define USTCNT_TXAE USTCNT_TXAVAILEN +#define USTCNT_TXHE USTCNT_TXHALFEN +#define USTCNT_TXEE USTCNT_TXEMPTYEN +#define USTCNT_RXRE USTCNT_RXREADYEN +#define USTCNT_RXHE USTCNT_RXHALFEN +#define USTCNT_RXFE USTCNT_RXFULLEN +#define USTCNT_CTSD USTCNT_CTSDELTAEN +#define USTCNT_ODD USTCNT_ODD_EVEN +#define USTCNT_PEN USTCNT_PARITYEN +#define USTCNT_CLKM USTCNT_CLKMODE +#define USTCNT_UEN USTCNT_UARTEN + +/* + * UART Baud Control Register + */ +#define UBAUD_ADDR 0xfffff902 +#define UBAUD WORD_REF(UBAUD_ADDR) + +#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ +#define UBAUD_PRESCALER_SHIFT 0 +#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ +#define UBAUD_DIVIDE_SHIFT 8 +#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ +#define UBAUD_GPIOSRC 0x1000 /* GPIO source */ +#define UBAUD_GPIODIR 0x2000 /* GPIO Direction */ +#define UBAUD_GPIO 0x4000 /* Current GPIO pin status */ +#define UBAUD_GPIODELTA 0x8000 /* GPIO pin value changed */ + +/* + * UART Receiver Register + */ +#define URX_ADDR 0xfffff904 +#define URX WORD_REF(URX_ADDR) + +#define URX_RXDATA_ADDR 0xfffff905 +#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) + +#define URX_RXDATA_MASK 0x00ff /* Received data */ +#define URX_RXDATA_SHIFT 0 +#define URX_PARITY_ERROR 0x0100 /* Parity Error */ +#define URX_BREAK 0x0200 /* Break Detected */ +#define URX_FRAME_ERROR 0x0400 /* Framing Error */ +#define URX_OVRUN 0x0800 /* Serial Overrun */ +#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ +#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ +#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ + +/* + * UART Transmitter Register + */ +#define UTX_ADDR 0xfffff906 +#define UTX WORD_REF(UTX_ADDR) + +#define UTX_TXDATA_ADDR 0xfffff907 +#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) + +#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ +#define UTX_TXDATA_SHIFT 0 +#define UTX_CTS_DELTA 0x0100 /* CTS changed */ +#define UTX_CTS_STATUS 0x0200 /* CTS State */ +#define UTX_IGNORE_CTS 0x0800 /* Ignore CTS */ +#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ +#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ +#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ +#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ + +/* 'EZ328-compatible definitions */ +#define UTX_CTS_STAT UTX_CTS_STATUS +#define UTX_NOCTS UTX_IGNORE_CTS + +/* + * UART Miscellaneous Register + */ +#define UMISC_ADDR 0xfffff908 +#define UMISC WORD_REF(UMISC_ADDR) + +#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ +#define UMISC_RX_POL 0x0008 /* Receive Polarity */ +#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ +#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ +#define UMISC_RTS 0x0040 /* Set RTS status */ +#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ +#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ +#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ +#define UMISC_CLKSRC 0x4000 /* Clock Source */ + + +/* generalization of uart control registers to support multiple ports: */ +typedef volatile struct { + volatile unsigned short int ustcnt; + volatile unsigned short int ubaud; + union { + volatile unsigned short int w; + struct { + volatile unsigned char status; + volatile unsigned char rxdata; + } b; + } urx; + union { + volatile unsigned short int w; + struct { + volatile unsigned char status; + volatile unsigned char txdata; + } b; + } utx; + volatile unsigned short int umisc; + volatile unsigned short int pad1; + volatile unsigned short int pad2; + volatile unsigned short int pad3; +} __attribute__((packed)) m68328_uart; + + +/********** + * + * 0xFFFFFAxx -- LCD Controller + * + **********/ + +/* + * LCD Screen Starting Address Register + */ +#define LSSA_ADDR 0xfffffa00 +#define LSSA LONG_REF(LSSA_ADDR) + +#define LSSA_SSA_MASK 0xfffffffe /* Bit 0 is reserved */ + +/* + * LCD Virtual Page Width Register + */ +#define LVPW_ADDR 0xfffffa05 +#define LVPW BYTE_REF(LVPW_ADDR) + +/* + * LCD Screen Width Register (not compatible with 'EZ328 !!!) + */ +#define LXMAX_ADDR 0xfffffa08 +#define LXMAX WORD_REF(LXMAX_ADDR) + +#define LXMAX_XM_MASK 0x02ff /* Bits 0-3 are reserved */ + +/* + * LCD Screen Height Register + */ +#define LYMAX_ADDR 0xfffffa0a +#define LYMAX WORD_REF(LYMAX_ADDR) + +#define LYMAX_YM_MASK 0x02ff /* Bits 10-15 are reserved */ + +/* + * LCD Cursor X Position Register + */ +#define LCXP_ADDR 0xfffffa18 +#define LCXP WORD_REF(LCXP_ADDR) + +#define LCXP_CC_MASK 0xc000 /* Cursor Control */ +#define LCXP_CC_TRAMSPARENT 0x0000 +#define LCXP_CC_BLACK 0x4000 +#define LCXP_CC_REVERSED 0x8000 +#define LCXP_CC_WHITE 0xc000 +#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ + +/* + * LCD Cursor Y Position Register + */ +#define LCYP_ADDR 0xfffffa1a +#define LCYP WORD_REF(LCYP_ADDR) + +#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ + +/* + * LCD Cursor Width and Heigth Register + */ +#define LCWCH_ADDR 0xfffffa1c +#define LCWCH WORD_REF(LCWCH_ADDR) + +#define LCWCH_CH_MASK 0x001f /* Cursor Height */ +#define LCWCH_CH_SHIFT 0 +#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ +#define LCWCH_CW_SHIFT 8 + +/* + * LCD Blink Control Register + */ +#define LBLKC_ADDR 0xfffffa1f +#define LBLKC BYTE_REF(LBLKC_ADDR) + +#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ +#define LBLKC_BD_SHIFT 0 +#define LBLKC_BKEN 0x80 /* Blink Enabled */ + +/* + * LCD Panel Interface Configuration Register + */ +#define LPICF_ADDR 0xfffffa20 +#define LPICF BYTE_REF(LPICF_ADDR) + +#define LPICF_GS_MASK 0x01 /* Gray-Scale Mode */ +#define LPICF_GS_BW 0x00 +#define LPICF_GS_GRAY_4 0x01 +#define LPICF_PBSIZ_MASK 0x06 /* Panel Bus Width */ +#define LPICF_PBSIZ_1 0x00 +#define LPICF_PBSIZ_2 0x02 +#define LPICF_PBSIZ_4 0x04 + +/* + * LCD Polarity Configuration Register + */ +#define LPOLCF_ADDR 0xfffffa21 +#define LPOLCF BYTE_REF(LPOLCF_ADDR) + +#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ +#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ +#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ +#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ + +/* + * LACD (LCD Alternate Crystal Direction) Rate Control Register + */ +#define LACDRC_ADDR 0xfffffa23 +#define LACDRC BYTE_REF(LACDRC_ADDR) + +#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ +#define LACDRC_ACD_SHIFT 0 + +/* + * LCD Pixel Clock Divider Register + */ +#define LPXCD_ADDR 0xfffffa25 +#define LPXCD BYTE_REF(LPXCD_ADDR) + +#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ +#define LPXCD_PCD_SHIFT 0 + +/* + * LCD Clocking Control Register + */ +#define LCKCON_ADDR 0xfffffa27 +#define LCKCON BYTE_REF(LCKCON_ADDR) + +#define LCKCON_PCDS 0x01 /* Pixel Clock Divider Source Select */ +#define LCKCON_DWIDTH 0x02 /* Display Memory Width */ +#define LCKCON_DWS_MASK 0x3c /* Display Wait-State */ +#define LCKCON_DWS_SHIFT 2 +#define LCKCON_DMA16 0x40 /* DMA burst length */ +#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ + +/* 'EZ328-compatible definitions */ +#define LCKCON_DW_MASK LCKCON_DWS_MASK +#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT + +/* + * LCD Last Buffer Address Register + */ +#define LLBAR_ADDR 0xfffffa29 +#define LLBAR BYTE_REF(LLBAR_ADDR) + +#define LLBAR_LBAR_MASK 0x7f /* Number of memory words to fill 1 line */ +#define LLBAR_LBAR_SHIFT 0 + +/* + * LCD Octet Terminal Count Register + */ +#define LOTCR_ADDR 0xfffffa2b +#define LOTCR BYTE_REF(LOTCR_ADDR) + +/* + * LCD Panning Offset Register + */ +#define LPOSR_ADDR 0xfffffa2d +#define LPOSR BYTE_REF(LPOSR_ADDR) + +#define LPOSR_BOS 0x08 /* Byte offset (for B/W mode only */ +#define LPOSR_POS_MASK 0x07 /* Pixel Offset Code */ +#define LPOSR_POS_SHIFT 0 + +/* + * LCD Frame Rate Control Modulation Register + */ +#define LFRCM_ADDR 0xfffffa31 +#define LFRCM BYTE_REF(LFRCM_ADDR) + +#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ +#define LFRCM_YMOD_SHIFT 0 +#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ +#define LFRCM_XMOD_SHIFT 4 + +/* + * LCD Gray Palette Mapping Register + */ +#define LGPMR_ADDR 0xfffffa32 +#define LGPMR WORD_REF(LGPMR_ADDR) + +#define LGPMR_GLEVEL3_MASK 0x000f +#define LGPMR_GLEVEL3_SHIFT 0 +#define LGPMR_GLEVEL2_MASK 0x00f0 +#define LGPMR_GLEVEL2_SHIFT 4 +#define LGPMR_GLEVEL0_MASK 0x0f00 +#define LGPMR_GLEVEL0_SHIFT 8 +#define LGPMR_GLEVEL1_MASK 0xf000 +#define LGPMR_GLEVEL1_SHIFT 12 + +/********** + * + * 0xFFFFFBxx -- Real-Time Clock (RTC) + * + **********/ + +/* + * RTC Hours Minutes and Seconds Register + */ +#define RTCTIME_ADDR 0xfffffb00 +#define RTCTIME LONG_REF(RTCTIME_ADDR) + +#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ +#define RTCTIME_SECONDS_SHIFT 0 +#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ +#define RTCTIME_MINUTES_SHIFT 16 +#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ +#define RTCTIME_HOURS_SHIFT 24 + +/* + * RTC Alarm Register + */ +#define RTCALRM_ADDR 0xfffffb04 +#define RTCALRM LONG_REF(RTCALRM_ADDR) + +#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ +#define RTCALRM_SECONDS_SHIFT 0 +#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ +#define RTCALRM_MINUTES_SHIFT 16 +#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ +#define RTCALRM_HOURS_SHIFT 24 + +/* + * RTC Control Register + */ +#define RTCCTL_ADDR 0xfffffb0c +#define RTCCTL WORD_REF(RTCCTL_ADDR) + +#define RTCCTL_384 0x0020 /* Crystal Selection */ +#define RTCCTL_ENABLE 0x0080 /* RTC Enable */ + +/* 'EZ328-compatible definitions */ +#define RTCCTL_XTL RTCCTL_384 +#define RTCCTL_EN RTCCTL_ENABLE + +/* + * RTC Interrupt Status Register + */ +#define RTCISR_ADDR 0xfffffb0e +#define RTCISR WORD_REF(RTCISR_ADDR) + +#define RTCISR_SW 0x0001 /* Stopwatch timed out */ +#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ +#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ +#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ +#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ + +/* + * RTC Interrupt Enable Register + */ +#define RTCIENR_ADDR 0xfffffb10 +#define RTCIENR WORD_REF(RTCIENR_ADDR) + +#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ +#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ +#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ +#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ +#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ + +/* + * Stopwatch Minutes Register + */ +#define STPWCH_ADDR 0xfffffb12 +#define STPWCH WORD_REF(STPWCH) + +#define STPWCH_CNT_MASK 0x00ff /* Stopwatch countdown value */ +#define SPTWCH_CNT_SHIFT 0 + +#endif /* _MC68328_H_ */ diff --git a/arch/m68knommu/include/asm/MC68332.h b/arch/m68knommu/include/asm/MC68332.h new file mode 100644 index 000000000000..6bb8f02685a2 --- /dev/null +++ b/arch/m68knommu/include/asm/MC68332.h @@ -0,0 +1,152 @@ + +/* include/asm-m68knommu/MC68332.h: '332 control registers + * + * Copyright (C) 1998 Kenneth Albanowski , + * + */ + +#ifndef _MC68332_H_ +#define _MC68332_H_ + +#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) +#define WORD_REF(addr) (*((volatile unsigned short*)addr)) + +#define PORTE_ADDR 0xfffa11 +#define PORTE BYTE_REF(PORTE_ADDR) +#define DDRE_ADDR 0xfffa15 +#define DDRE BYTE_REF(DDRE_ADDR) +#define PEPAR_ADDR 0xfffa17 +#define PEPAR BYTE_REF(PEPAR_ADDR) + +#define PORTF_ADDR 0xfffa19 +#define PORTF BYTE_REF(PORTF_ADDR) +#define DDRF_ADDR 0xfffa1d +#define DDRF BYTE_REF(DDRF_ADDR) +#define PFPAR_ADDR 0xfffa1f +#define PFPAR BYTE_REF(PFPAR_ADDR) + +#define PORTQS_ADDR 0xfffc15 +#define PORTQS BYTE_REF(PORTQS_ADDR) +#define DDRQS_ADDR 0xfffc17 +#define DDRQS BYTE_REF(DDRQS_ADDR) +#define PQSPAR_ADDR 0xfffc16 +#define PQSPAR BYTE_REF(PQSPAR_ADDR) + +#define CSPAR0_ADDR 0xFFFA44 +#define CSPAR0 WORD_REF(CSPAR0_ADDR) +#define CSPAR1_ADDR 0xFFFA46 +#define CSPAR1 WORD_REF(CSPAR1_ADDR) +#define CSARBT_ADDR 0xFFFA48 +#define CSARBT WORD_REF(CSARBT_ADDR) +#define CSOPBT_ADDR 0xFFFA4A +#define CSOPBT WORD_REF(CSOPBT_ADDR) +#define CSBAR0_ADDR 0xFFFA4C +#define CSBAR0 WORD_REF(CSBAR0_ADDR) +#define CSOR0_ADDR 0xFFFA4E +#define CSOR0 WORD_REF(CSOR0_ADDR) +#define CSBAR1_ADDR 0xFFFA50 +#define CSBAR1 WORD_REF(CSBAR1_ADDR) +#define CSOR1_ADDR 0xFFFA52 +#define CSOR1 WORD_REF(CSOR1_ADDR) +#define CSBAR2_ADDR 0xFFFA54 +#define CSBAR2 WORD_REF(CSBAR2_ADDR) +#define CSOR2_ADDR 0xFFFA56 +#define CSOR2 WORD_REF(CSOR2_ADDR) +#define CSBAR3_ADDR 0xFFFA58 +#define CSBAR3 WORD_REF(CSBAR3_ADDR) +#define CSOR3_ADDR 0xFFFA5A +#define CSOR3 WORD_REF(CSOR3_ADDR) +#define CSBAR4_ADDR 0xFFFA5C +#define CSBAR4 WORD_REF(CSBAR4_ADDR) +#define CSOR4_ADDR 0xFFFA5E +#define CSOR4 WORD_REF(CSOR4_ADDR) +#define CSBAR5_ADDR 0xFFFA60 +#define CSBAR5 WORD_REF(CSBAR5_ADDR) +#define CSOR5_ADDR 0xFFFA62 +#define CSOR5 WORD_REF(CSOR5_ADDR) +#define CSBAR6_ADDR 0xFFFA64 +#define CSBAR6 WORD_REF(CSBAR6_ADDR) +#define CSOR6_ADDR 0xFFFA66 +#define CSOR6 WORD_REF(CSOR6_ADDR) +#define CSBAR7_ADDR 0xFFFA68 +#define CSBAR7 WORD_REF(CSBAR7_ADDR) +#define CSOR7_ADDR 0xFFFA6A +#define CSOR7 WORD_REF(CSOR7_ADDR) +#define CSBAR8_ADDR 0xFFFA6C +#define CSBAR8 WORD_REF(CSBAR8_ADDR) +#define CSOR8_ADDR 0xFFFA6E +#define CSOR8 WORD_REF(CSOR8_ADDR) +#define CSBAR9_ADDR 0xFFFA70 +#define CSBAR9 WORD_REF(CSBAR9_ADDR) +#define CSOR9_ADDR 0xFFFA72 +#define CSOR9 WORD_REF(CSOR9_ADDR) +#define CSBAR10_ADDR 0xFFFA74 +#define CSBAR10 WORD_REF(CSBAR10_ADDR) +#define CSOR10_ADDR 0xFFFA76 +#define CSOR10 WORD_REF(CSOR10_ADDR) + +#define CSOR_MODE_ASYNC 0x0000 +#define CSOR_MODE_SYNC 0x8000 +#define CSOR_MODE_MASK 0x8000 +#define CSOR_BYTE_DISABLE 0x0000 +#define CSOR_BYTE_UPPER 0x4000 +#define CSOR_BYTE_LOWER 0x2000 +#define CSOR_BYTE_BOTH 0x6000 +#define CSOR_BYTE_MASK 0x6000 +#define CSOR_RW_RSVD 0x0000 +#define CSOR_RW_READ 0x0800 +#define CSOR_RW_WRITE 0x1000 +#define CSOR_RW_BOTH 0x1800 +#define CSOR_RW_MASK 0x1800 +#define CSOR_STROBE_DS 0x0400 +#define CSOR_STROBE_AS 0x0000 +#define CSOR_STROBE_MASK 0x0400 +#define CSOR_DSACK_WAIT(x) (wait << 6) +#define CSOR_DSACK_FTERM (14 << 6) +#define CSOR_DSACK_EXTERNAL (15 << 6) +#define CSOR_DSACK_MASK 0x03c0 +#define CSOR_SPACE_CPU 0x0000 +#define CSOR_SPACE_USER 0x0010 +#define CSOR_SPACE_SU 0x0020 +#define CSOR_SPACE_BOTH 0x0030 +#define CSOR_SPACE_MASK 0x0030 +#define CSOR_IPL_ALL 0x0000 +#define CSOR_IPL_PRIORITY(x) (x << 1) +#define CSOR_IPL_MASK 0x000e +#define CSOR_AVEC_ON 0x0001 +#define CSOR_AVEC_OFF 0x0000 +#define CSOR_AVEC_MASK 0x0001 + +#define CSBAR_ADDR(x) ((addr >> 11) << 3) +#define CSBAR_ADDR_MASK 0xfff8 +#define CSBAR_BLKSIZE_2K 0x0000 +#define CSBAR_BLKSIZE_8K 0x0001 +#define CSBAR_BLKSIZE_16K 0x0002 +#define CSBAR_BLKSIZE_64K 0x0003 +#define CSBAR_BLKSIZE_128K 0x0004 +#define CSBAR_BLKSIZE_256K 0x0005 +#define CSBAR_BLKSIZE_512K 0x0006 +#define CSBAR_BLKSIZE_1M 0x0007 +#define CSBAR_BLKSIZE_MASK 0x0007 + +#define CSPAR_DISC 0 +#define CSPAR_ALT 1 +#define CSPAR_CS8 2 +#define CSPAR_CS16 3 +#define CSPAR_MASK 3 + +#define CSPAR0_CSBOOT(x) (x << 0) +#define CSPAR0_CS0(x) (x << 2) +#define CSPAR0_CS1(x) (x << 4) +#define CSPAR0_CS2(x) (x << 6) +#define CSPAR0_CS3(x) (x << 8) +#define CSPAR0_CS4(x) (x << 10) +#define CSPAR0_CS5(x) (x << 12) + +#define CSPAR1_CS6(x) (x << 0) +#define CSPAR1_CS7(x) (x << 2) +#define CSPAR1_CS8(x) (x << 4) +#define CSPAR1_CS9(x) (x << 6) +#define CSPAR1_CS10(x) (x << 8) + +#endif diff --git a/arch/m68knommu/include/asm/MC68EZ328.h b/arch/m68knommu/include/asm/MC68EZ328.h new file mode 100644 index 000000000000..69b7f9139e5e --- /dev/null +++ b/arch/m68knommu/include/asm/MC68EZ328.h @@ -0,0 +1,1253 @@ + +/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers + * + * Copyright (C) 1999 Vladimir Gurevich + * Bear & Hare Software, Inc. + * + * Based on include/asm-m68knommu/MC68332.h + * Copyright (C) 1998 Kenneth Albanowski , + * The Silver Hammer Group, Ltd. + * + */ + +#ifndef _MC68EZ328_H_ +#define _MC68EZ328_H_ + +#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) +#define WORD_REF(addr) (*((volatile unsigned short*)addr)) +#define LONG_REF(addr) (*((volatile unsigned long*)addr)) + +#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) +#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) + +/********** + * + * 0xFFFFF0xx -- System Control + * + **********/ + +/* + * System Control Register (SCR) + */ +#define SCR_ADDR 0xfffff000 +#define SCR BYTE_REF(SCR_ADDR) + +#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ +#define SCR_DMAP 0x04 /* Double Map */ +#define SCR_SO 0x08 /* Supervisor Only */ +#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ +#define SCR_PRV 0x20 /* Privilege Violation */ +#define SCR_WPV 0x40 /* Write Protect Violation */ +#define SCR_BETO 0x80 /* Bus-Error TimeOut */ + +/* + * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility) + */ +#define MRR_ADDR 0xfffff004 +#define MRR LONG_REF(MRR_ADDR) + +/********** + * + * 0xFFFFF1xx -- Chip-Select logic + * + **********/ + +/* + * Chip Select Group Base Registers + */ +#define CSGBA_ADDR 0xfffff100 +#define CSGBB_ADDR 0xfffff102 + +#define CSGBC_ADDR 0xfffff104 +#define CSGBD_ADDR 0xfffff106 + +#define CSGBA WORD_REF(CSGBA_ADDR) +#define CSGBB WORD_REF(CSGBB_ADDR) +#define CSGBC WORD_REF(CSGBC_ADDR) +#define CSGBD WORD_REF(CSGBD_ADDR) + +/* + * Chip Select Registers + */ +#define CSA_ADDR 0xfffff110 +#define CSB_ADDR 0xfffff112 +#define CSC_ADDR 0xfffff114 +#define CSD_ADDR 0xfffff116 + +#define CSA WORD_REF(CSA_ADDR) +#define CSB WORD_REF(CSB_ADDR) +#define CSC WORD_REF(CSC_ADDR) +#define CSD WORD_REF(CSD_ADDR) + +#define CSA_EN 0x0001 /* Chip-Select Enable */ +#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSA_SIZ_SHIFT 1 +#define CSA_WS_MASK 0x0070 /* Wait State */ +#define CSA_WS_SHIFT 4 +#define CSA_BSW 0x0080 /* Data Bus Width */ +#define CSA_FLASH 0x0100 /* FLASH Memory Support */ +#define CSA_RO 0x8000 /* Read-Only */ + +#define CSB_EN 0x0001 /* Chip-Select Enable */ +#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSB_SIZ_SHIFT 1 +#define CSB_WS_MASK 0x0070 /* Wait State */ +#define CSB_WS_SHIFT 4 +#define CSB_BSW 0x0080 /* Data Bus Width */ +#define CSB_FLASH 0x0100 /* FLASH Memory Support */ +#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ +#define CSB_UPSIZ_SHIFT 11 +#define CSB_ROP 0x2000 /* Readonly if protected */ +#define CSB_SOP 0x4000 /* Supervisor only if protected */ +#define CSB_RO 0x8000 /* Read-Only */ + +#define CSC_EN 0x0001 /* Chip-Select Enable */ +#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSC_SIZ_SHIFT 1 +#define CSC_WS_MASK 0x0070 /* Wait State */ +#define CSC_WS_SHIFT 4 +#define CSC_BSW 0x0080 /* Data Bus Width */ +#define CSC_FLASH 0x0100 /* FLASH Memory Support */ +#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ +#define CSC_UPSIZ_SHIFT 11 +#define CSC_ROP 0x2000 /* Readonly if protected */ +#define CSC_SOP 0x4000 /* Supervisor only if protected */ +#define CSC_RO 0x8000 /* Read-Only */ + +#define CSD_EN 0x0001 /* Chip-Select Enable */ +#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSD_SIZ_SHIFT 1 +#define CSD_WS_MASK 0x0070 /* Wait State */ +#define CSD_WS_SHIFT 4 +#define CSD_BSW 0x0080 /* Data Bus Width */ +#define CSD_FLASH 0x0100 /* FLASH Memory Support */ +#define CSD_DRAM 0x0200 /* Dram Selection */ +#define CSD_COMB 0x0400 /* Combining */ +#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ +#define CSD_UPSIZ_SHIFT 11 +#define CSD_ROP 0x2000 /* Readonly if protected */ +#define CSD_SOP 0x4000 /* Supervisor only if protected */ +#define CSD_RO 0x8000 /* Read-Only */ + +/* + * Emulation Chip-Select Register + */ +#define EMUCS_ADDR 0xfffff118 +#define EMUCS WORD_REF(EMUCS_ADDR) + +#define EMUCS_WS_MASK 0x0070 +#define EMUCS_WS_SHIFT 4 + +/********** + * + * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control + * + **********/ + +/* + * PLL Control Register + */ +#define PLLCR_ADDR 0xfffff200 +#define PLLCR WORD_REF(PLLCR_ADDR) + +#define PLLCR_DISPLL 0x0008 /* Disable PLL */ +#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ +#define PLLCR_PRESC 0x0020 /* VCO prescaler */ +#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ +#define PLLCR_SYSCLK_SEL_SHIFT 8 +#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ +#define PLLCR_LCDCLK_SEL_SHIFT 11 + +/* '328-compatible definitions */ +#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK +#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT + +/* + * PLL Frequency Select Register + */ +#define PLLFSR_ADDR 0xfffff202 +#define PLLFSR WORD_REF(PLLFSR_ADDR) + +#define PLLFSR_PC_MASK 0x00ff /* P Count */ +#define PLLFSR_PC_SHIFT 0 +#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ +#define PLLFSR_QC_SHIFT 8 +#define PLLFSR_PROT 0x4000 /* Protect P & Q */ +#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ + +/* + * Power Control Register + */ +#define PCTRL_ADDR 0xfffff207 +#define PCTRL BYTE_REF(PCTRL_ADDR) + +#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ +#define PCTRL_WIDTH_SHIFT 0 +#define PCTRL_PCEN 0x80 /* Power Control Enable */ + +/********** + * + * 0xFFFFF3xx -- Interrupt Controller + * + **********/ + +/* + * Interrupt Vector Register + */ +#define IVR_ADDR 0xfffff300 +#define IVR BYTE_REF(IVR_ADDR) + +#define IVR_VECTOR_MASK 0xF8 + +/* + * Interrupt control Register + */ +#define ICR_ADDR 0xfffff302 +#define ICR WORD_REF(ICR_ADDR) + +#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */ +#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ +#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ +#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ +#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ +#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ +#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ +#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ +#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ + +/* + * Interrupt Mask Register + */ +#define IMR_ADDR 0xfffff304 +#define IMR LONG_REF(IMR_ADDR) + +/* + * Define the names for bit positions first. This is useful for + * request_irq + */ +#define SPI_IRQ_NUM 0 /* SPI interrupt */ +#define TMR_IRQ_NUM 1 /* Timer interrupt */ +#define UART_IRQ_NUM 2 /* UART interrupt */ +#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ +#define RTC_IRQ_NUM 4 /* RTC interrupt */ +#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ +#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */ +#define INT0_IRQ_NUM 8 /* External INT0 */ +#define INT1_IRQ_NUM 9 /* External INT1 */ +#define INT2_IRQ_NUM 10 /* External INT2 */ +#define INT3_IRQ_NUM 11 /* External INT3 */ +#define IRQ1_IRQ_NUM 16 /* IRQ1 */ +#define IRQ2_IRQ_NUM 17 /* IRQ2 */ +#define IRQ3_IRQ_NUM 18 /* IRQ3 */ +#define IRQ6_IRQ_NUM 19 /* IRQ6 */ +#define IRQ5_IRQ_NUM 20 /* IRQ5 */ +#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */ +#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */ + +/* '328-compatible definitions */ +#define SPIM_IRQ_NUM SPI_IRQ_NUM +#define TMR1_IRQ_NUM TMR_IRQ_NUM + +/* + * Here go the bitmasks themselves + */ +#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */ +#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */ +#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ +#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ +#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ +#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ +#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ +#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ +#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ +#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ +#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ +#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ +#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ +#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ +#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ +#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */ +#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */ +#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */ + +/* '328-compatible definitions */ +#define IMR_MSPIM IMR_MSPI +#define IMR_MTMR1 IMR_MTMR + +/* + * Interrupt Status Register + */ +#define ISR_ADDR 0xfffff30c +#define ISR LONG_REF(ISR_ADDR) + +#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ +#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ +#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ +#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ +#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ +#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ +#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ +#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ +#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ +#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ +#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ +#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ +#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ +#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ +#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ +#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ +#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ +#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ + +/* '328-compatible definitions */ +#define ISR_SPIM ISR_SPI +#define ISR_TMR1 ISR_TMR + +/* + * Interrupt Pending Register + */ +#define IPR_ADDR 0xfffff30c +#define IPR LONG_REF(IPR_ADDR) + +#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ +#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ +#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ +#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ +#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ +#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ +#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ +#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ +#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ +#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ +#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ +#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ +#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ +#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ +#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ +#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ +#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ +#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ + +/* '328-compatible definitions */ +#define IPR_SPIM IPR_SPI +#define IPR_TMR1 IPR_TMR + +/********** + * + * 0xFFFFF4xx -- Parallel Ports + * + **********/ + +/* + * Port A + */ +#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ +#define PADATA_ADDR 0xfffff401 /* Port A data register */ +#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */ + +#define PADIR BYTE_REF(PADIR_ADDR) +#define PADATA BYTE_REF(PADATA_ADDR) +#define PAPUEN BYTE_REF(PAPUEN_ADDR) + +#define PA(x) (1 << (x)) + +/* + * Port B + */ +#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ +#define PBDATA_ADDR 0xfffff409 /* Port B data register */ +#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */ +#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ + +#define PBDIR BYTE_REF(PBDIR_ADDR) +#define PBDATA BYTE_REF(PBDATA_ADDR) +#define PBPUEN BYTE_REF(PBPUEN_ADDR) +#define PBSEL BYTE_REF(PBSEL_ADDR) + +#define PB(x) (1 << (x)) + +#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */ +#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */ +#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */ +#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */ +#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */ +#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */ +#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */ +#define PB_PWMO 0x80 /* Use PWMO as PB[7] */ + +/* + * Port C + */ +#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ +#define PCDATA_ADDR 0xfffff411 /* Port C data register */ +#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */ +#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ + +#define PCDIR BYTE_REF(PCDIR_ADDR) +#define PCDATA BYTE_REF(PCDATA_ADDR) +#define PCPDEN BYTE_REF(PCPDEN_ADDR) +#define PCSEL BYTE_REF(PCSEL_ADDR) + +#define PC(x) (1 << (x)) + +#define PC_LD0 0x01 /* Use LD0 as PC[0] */ +#define PC_LD1 0x02 /* Use LD1 as PC[1] */ +#define PC_LD2 0x04 /* Use LD2 as PC[2] */ +#define PC_LD3 0x08 /* Use LD3 as PC[3] */ +#define PC_LFLM 0x10 /* Use LFLM as PC[4] */ +#define PC_LLP 0x20 /* Use LLP as PC[5] */ +#define PC_LCLK 0x40 /* Use LCLK as PC[6] */ +#define PC_LACD 0x80 /* Use LACD as PC[7] */ + +/* + * Port D + */ +#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ +#define PDDATA_ADDR 0xfffff419 /* Port D data register */ +#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ +#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */ +#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ +#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ +#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */ +#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ + +#define PDDIR BYTE_REF(PDDIR_ADDR) +#define PDDATA BYTE_REF(PDDATA_ADDR) +#define PDPUEN BYTE_REF(PDPUEN_ADDR) +#define PDSEL BYTE_REF(PDSEL_ADDR) +#define PDPOL BYTE_REF(PDPOL_ADDR) +#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) +#define PDKBEN BYTE_REF(PDKBEN_ADDR) +#define PDIQEG BYTE_REF(PDIQEG_ADDR) + +#define PD(x) (1 << (x)) + +#define PD_INT0 0x01 /* Use INT0 as PD[0] */ +#define PD_INT1 0x02 /* Use INT1 as PD[1] */ +#define PD_INT2 0x04 /* Use INT2 as PD[2] */ +#define PD_INT3 0x08 /* Use INT3 as PD[3] */ +#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */ +#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */ +#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */ +#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */ + +/* + * Port E + */ +#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ +#define PEDATA_ADDR 0xfffff421 /* Port E data register */ +#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ +#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ + +#define PEDIR BYTE_REF(PEDIR_ADDR) +#define PEDATA BYTE_REF(PEDATA_ADDR) +#define PEPUEN BYTE_REF(PEPUEN_ADDR) +#define PESEL BYTE_REF(PESEL_ADDR) + +#define PE(x) (1 << (x)) + +#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */ +#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */ +#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */ +#define PE_DWE 0x08 /* Use DWE as PE[3] */ +#define PE_RXD 0x10 /* Use RXD as PE[4] */ +#define PE_TXD 0x20 /* Use TXD as PE[5] */ +#define PE_RTS 0x40 /* Use RTS as PE[6] */ +#define PE_CTS 0x80 /* Use CTS as PE[7] */ + +/* + * Port F + */ +#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ +#define PFDATA_ADDR 0xfffff429 /* Port F data register */ +#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ +#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ + +#define PFDIR BYTE_REF(PFDIR_ADDR) +#define PFDATA BYTE_REF(PFDATA_ADDR) +#define PFPUEN BYTE_REF(PFPUEN_ADDR) +#define PFSEL BYTE_REF(PFSEL_ADDR) + +#define PF(x) (1 << (x)) + +#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */ +#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */ +#define PF_CLKO 0x04 /* Use CLKO as PF[2] */ +#define PF_A20 0x08 /* Use A20 as PF[3] */ +#define PF_A21 0x10 /* Use A21 as PF[4] */ +#define PF_A22 0x20 /* Use A22 as PF[5] */ +#define PF_A23 0x40 /* Use A23 as PF[6] */ +#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */ + +/* + * Port G + */ +#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ +#define PGDATA_ADDR 0xfffff431 /* Port G data register */ +#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ +#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ + +#define PGDIR BYTE_REF(PGDIR_ADDR) +#define PGDATA BYTE_REF(PGDATA_ADDR) +#define PGPUEN BYTE_REF(PGPUEN_ADDR) +#define PGSEL BYTE_REF(PGSEL_ADDR) + +#define PG(x) (1 << (x)) + +#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */ +#define PG_A0 0x02 /* Use A0 as PG[1] */ +#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */ +#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */ +#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */ +#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */ + +/********** + * + * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) + * + **********/ + +/* + * PWM Control Register + */ +#define PWMC_ADDR 0xfffff500 +#define PWMC WORD_REF(PWMC_ADDR) + +#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */ +#define PWMC_CLKSEL_SHIFT 0 +#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */ +#define PWMC_REPEAT_SHIFT 2 +#define PWMC_EN 0x0010 /* Enable PWM */ +#define PMNC_FIFOAV 0x0020 /* FIFO Available */ +#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */ +#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */ +#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */ +#define PWMC_PRESCALER_SHIFT 8 +#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ + +/* '328-compatible definitions */ +#define PWMC_PWMEN PWMC_EN + +/* + * PWM Sample Register + */ +#define PWMS_ADDR 0xfffff502 +#define PWMS WORD_REF(PWMS_ADDR) + +/* + * PWM Period Register + */ +#define PWMP_ADDR 0xfffff504 +#define PWMP BYTE_REF(PWMP_ADDR) + +/* + * PWM Counter Register + */ +#define PWMCNT_ADDR 0xfffff505 +#define PWMCNT BYTE_REF(PWMCNT_ADDR) + +/********** + * + * 0xFFFFF6xx -- General-Purpose Timer + * + **********/ + +/* + * Timer Control register + */ +#define TCTL_ADDR 0xfffff600 +#define TCTL WORD_REF(TCTL_ADDR) + +#define TCTL_TEN 0x0001 /* Timer Enable */ +#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ +#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ +#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ +#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ +#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ +#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ +#define TCTL_IRQEN 0x0010 /* IRQ Enable */ +#define TCTL_OM 0x0020 /* Output Mode */ +#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ +#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ +#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ +#define TCTL_FRR 0x0010 /* Free-Run Mode */ + +/* '328-compatible definitions */ +#define TCTL1_ADDR TCTL_ADDR +#define TCTL1 TCTL + +/* + * Timer Prescaler Register + */ +#define TPRER_ADDR 0xfffff602 +#define TPRER WORD_REF(TPRER_ADDR) + +/* '328-compatible definitions */ +#define TPRER1_ADDR TPRER_ADDR +#define TPRER1 TPRER + +/* + * Timer Compare Register + */ +#define TCMP_ADDR 0xfffff604 +#define TCMP WORD_REF(TCMP_ADDR) + +/* '328-compatible definitions */ +#define TCMP1_ADDR TCMP_ADDR +#define TCMP1 TCMP + +/* + * Timer Capture register + */ +#define TCR_ADDR 0xfffff606 +#define TCR WORD_REF(TCR_ADDR) + +/* '328-compatible definitions */ +#define TCR1_ADDR TCR_ADDR +#define TCR1 TCR + +/* + * Timer Counter Register + */ +#define TCN_ADDR 0xfffff608 +#define TCN WORD_REF(TCN_ADDR) + +/* '328-compatible definitions */ +#define TCN1_ADDR TCN_ADDR +#define TCN1 TCN + +/* + * Timer Status Register + */ +#define TSTAT_ADDR 0xfffff60a +#define TSTAT WORD_REF(TSTAT_ADDR) + +#define TSTAT_COMP 0x0001 /* Compare Event occurred */ +#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ + +/* '328-compatible definitions */ +#define TSTAT1_ADDR TSTAT_ADDR +#define TSTAT1 TSTAT + +/********** + * + * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) + * + **********/ + +/* + * SPIM Data Register + */ +#define SPIMDATA_ADDR 0xfffff800 +#define SPIMDATA WORD_REF(SPIMDATA_ADDR) + +/* + * SPIM Control/Status Register + */ +#define SPIMCONT_ADDR 0xfffff802 +#define SPIMCONT WORD_REF(SPIMCONT_ADDR) + +#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ +#define SPIMCONT_BIT_COUNT_SHIFT 0 +#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ +#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ +#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ +#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */ +#define SPIMCONT_XCH 0x0100 /* Exchange */ +#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */ +#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ +#define SPIMCONT_DATA_RATE_SHIFT 13 + +/* '328-compatible definitions */ +#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ +#define SPIMCONT_SPIMEN SPIMCONT_ENABLE + +/********** + * + * 0xFFFFF9xx -- UART + * + **********/ + +/* + * UART Status/Control Register + */ +#define USTCNT_ADDR 0xfffff900 +#define USTCNT WORD_REF(USTCNT_ADDR) + +#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */ +#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */ +#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */ +#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */ +#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */ +#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */ +#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */ +#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */ +#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ +#define USTCNT_STOP 0x0200 /* Stop bit transmission */ +#define USTCNT_ODD 0x0400 /* Odd Parity */ +#define USTCNT_PEN 0x0800 /* Parity Enable */ +#define USTCNT_CLKM 0x1000 /* Clock Mode Select */ +#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ +#define USTCNT_RXEN 0x4000 /* Receiver Enable */ +#define USTCNT_UEN 0x8000 /* UART Enable */ + +/* '328-compatible definitions */ +#define USTCNT_TXAVAILEN USTCNT_TXAE +#define USTCNT_TXHALFEN USTCNT_TXHE +#define USTCNT_TXEMPTYEN USTCNT_TXEE +#define USTCNT_RXREADYEN USTCNT_RXRE +#define USTCNT_RXHALFEN USTCNT_RXHE +#define USTCNT_RXFULLEN USTCNT_RXFE +#define USTCNT_CTSDELTAEN USTCNT_CTSD +#define USTCNT_ODD_EVEN USTCNT_ODD +#define USTCNT_PARITYEN USTCNT_PEN +#define USTCNT_CLKMODE USTCNT_CLKM +#define USTCNT_UARTEN USTCNT_UEN + +/* + * UART Baud Control Register + */ +#define UBAUD_ADDR 0xfffff902 +#define UBAUD WORD_REF(UBAUD_ADDR) + +#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ +#define UBAUD_PRESCALER_SHIFT 0 +#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ +#define UBAUD_DIVIDE_SHIFT 8 +#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ +#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */ + +/* + * UART Receiver Register + */ +#define URX_ADDR 0xfffff904 +#define URX WORD_REF(URX_ADDR) + +#define URX_RXDATA_ADDR 0xfffff905 +#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) + +#define URX_RXDATA_MASK 0x00ff /* Received data */ +#define URX_RXDATA_SHIFT 0 +#define URX_PARITY_ERROR 0x0100 /* Parity Error */ +#define URX_BREAK 0x0200 /* Break Detected */ +#define URX_FRAME_ERROR 0x0400 /* Framing Error */ +#define URX_OVRUN 0x0800 /* Serial Overrun */ +#define URX_OLD_DATA 0x1000 /* Old data in FIFO */ +#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ +#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ +#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ + +/* + * UART Transmitter Register + */ +#define UTX_ADDR 0xfffff906 +#define UTX WORD_REF(UTX_ADDR) + +#define UTX_TXDATA_ADDR 0xfffff907 +#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) + +#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ +#define UTX_TXDATA_SHIFT 0 +#define UTX_CTS_DELTA 0x0100 /* CTS changed */ +#define UTX_CTS_STAT 0x0200 /* CTS State */ +#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */ +#define UTX_NOCTS 0x0800 /* Ignore CTS */ +#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ +#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ +#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ +#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ + +/* '328-compatible definitions */ +#define UTX_CTS_STATUS UTX_CTS_STAT +#define UTX_IGNORE_CTS UTX_NOCTS + +/* + * UART Miscellaneous Register + */ +#define UMISC_ADDR 0xfffff908 +#define UMISC WORD_REF(UMISC_ADDR) + +#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ +#define UMISC_RX_POL 0x0008 /* Receive Polarity */ +#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ +#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ +#define UMISC_RTS 0x0040 /* Set RTS status */ +#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ +#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */ +#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */ +#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ +#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ +#define UMISC_CLKSRC 0x4000 /* Clock Source */ +#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */ + +/* + * UART Non-integer Prescaler Register + */ +#define NIPR_ADDR 0xfffff90a +#define NIPR WORD_REF(NIPR_ADDR) + +#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */ +#define NIPR_STEP_VALUE_SHIFT 0 +#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */ +#define NIPR_SELECT_SHIFT 8 +#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */ + + +/* generalization of uart control registers to support multiple ports: */ +typedef volatile struct { + volatile unsigned short int ustcnt; + volatile unsigned short int ubaud; + union { + volatile unsigned short int w; + struct { + volatile unsigned char status; + volatile unsigned char rxdata; + } b; + } urx; + union { + volatile unsigned short int w; + struct { + volatile unsigned char status; + volatile unsigned char txdata; + } b; + } utx; + volatile unsigned short int umisc; + volatile unsigned short int nipr; + volatile unsigned short int pad1; + volatile unsigned short int pad2; +} __attribute__((packed)) m68328_uart; + + +/********** + * + * 0xFFFFFAxx -- LCD Controller + * + **********/ + +/* + * LCD Screen Starting Address Register + */ +#define LSSA_ADDR 0xfffffa00 +#define LSSA LONG_REF(LSSA_ADDR) + +#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */ + +/* + * LCD Virtual Page Width Register + */ +#define LVPW_ADDR 0xfffffa05 +#define LVPW BYTE_REF(LVPW_ADDR) + +/* + * LCD Screen Width Register (not compatible with '328 !!!) + */ +#define LXMAX_ADDR 0xfffffa08 +#define LXMAX WORD_REF(LXMAX_ADDR) + +#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */ + +/* + * LCD Screen Height Register + */ +#define LYMAX_ADDR 0xfffffa0a +#define LYMAX WORD_REF(LYMAX_ADDR) + +#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */ + +/* + * LCD Cursor X Position Register + */ +#define LCXP_ADDR 0xfffffa18 +#define LCXP WORD_REF(LCXP_ADDR) + +#define LCXP_CC_MASK 0xc000 /* Cursor Control */ +#define LCXP_CC_TRAMSPARENT 0x0000 +#define LCXP_CC_BLACK 0x4000 +#define LCXP_CC_REVERSED 0x8000 +#define LCXP_CC_WHITE 0xc000 +#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ + +/* + * LCD Cursor Y Position Register + */ +#define LCYP_ADDR 0xfffffa1a +#define LCYP WORD_REF(LCYP_ADDR) + +#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ + +/* + * LCD Cursor Width and Heigth Register + */ +#define LCWCH_ADDR 0xfffffa1c +#define LCWCH WORD_REF(LCWCH_ADDR) + +#define LCWCH_CH_MASK 0x001f /* Cursor Height */ +#define LCWCH_CH_SHIFT 0 +#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ +#define LCWCH_CW_SHIFT 8 + +/* + * LCD Blink Control Register + */ +#define LBLKC_ADDR 0xfffffa1f +#define LBLKC BYTE_REF(LBLKC_ADDR) + +#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ +#define LBLKC_BD_SHIFT 0 +#define LBLKC_BKEN 0x80 /* Blink Enabled */ + +/* + * LCD Panel Interface Configuration Register + */ +#define LPICF_ADDR 0xfffffa20 +#define LPICF BYTE_REF(LPICF_ADDR) + +#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */ +#define LPICF_GS_BW 0x00 +#define LPICF_GS_GRAY_4 0x01 +#define LPICF_GS_GRAY_16 0x02 +#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */ +#define LPICF_PBSIZ_1 0x00 +#define LPICF_PBSIZ_2 0x04 +#define LPICF_PBSIZ_4 0x08 + +/* + * LCD Polarity Configuration Register + */ +#define LPOLCF_ADDR 0xfffffa21 +#define LPOLCF BYTE_REF(LPOLCF_ADDR) + +#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ +#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ +#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ +#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ + +/* + * LACD (LCD Alternate Crystal Direction) Rate Control Register + */ +#define LACDRC_ADDR 0xfffffa23 +#define LACDRC BYTE_REF(LACDRC_ADDR) + +#define LACDRC_ACDSLT 0x80 /* Signal Source Select */ +#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ +#define LACDRC_ACD_SHIFT 0 + +/* + * LCD Pixel Clock Divider Register + */ +#define LPXCD_ADDR 0xfffffa25 +#define LPXCD BYTE_REF(LPXCD_ADDR) + +#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ +#define LPXCD_PCD_SHIFT 0 + +/* + * LCD Clocking Control Register + */ +#define LCKCON_ADDR 0xfffffa27 +#define LCKCON BYTE_REF(LCKCON_ADDR) + +#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */ +#define LCKCON_DWS_SHIFT 0 +#define LCKCON_DWIDTH 0x40 /* Display Memory Width */ +#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ + +/* '328-compatible definitions */ +#define LCKCON_DW_MASK LCKCON_DWS_MASK +#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT + +/* + * LCD Refresh Rate Adjustment Register + */ +#define LRRA_ADDR 0xfffffa29 +#define LRRA BYTE_REF(LRRA_ADDR) + +/* + * LCD Panning Offset Register + */ +#define LPOSR_ADDR 0xfffffa2d +#define LPOSR BYTE_REF(LPOSR_ADDR) + +#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */ +#define LPOSR_POS_SHIFT 0 + +/* + * LCD Frame Rate Control Modulation Register + */ +#define LFRCM_ADDR 0xfffffa31 +#define LFRCM BYTE_REF(LFRCM_ADDR) + +#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ +#define LFRCM_YMOD_SHIFT 0 +#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ +#define LFRCM_XMOD_SHIFT 4 + +/* + * LCD Gray Palette Mapping Register + */ +#define LGPMR_ADDR 0xfffffa33 +#define LGPMR BYTE_REF(LGPMR_ADDR) + +#define LGPMR_G1_MASK 0x0f +#define LGPMR_G1_SHIFT 0 +#define LGPMR_G2_MASK 0xf0 +#define LGPMR_G2_SHIFT 4 + +/* + * PWM Contrast Control Register + */ +#define PWMR_ADDR 0xfffffa36 +#define PWMR WORD_REF(PWMR_ADDR) + +#define PWMR_PW_MASK 0x00ff /* Pulse Width */ +#define PWMR_PW_SHIFT 0 +#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */ +#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */ +#define PWMR_SRC_LINE 0x0000 /* Line Pulse */ +#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */ +#define PWMR_SRC_LCD 0x4000 /* LCD clock */ + +/********** + * + * 0xFFFFFBxx -- Real-Time Clock (RTC) + * + **********/ + +/* + * RTC Hours Minutes and Seconds Register + */ +#define RTCTIME_ADDR 0xfffffb00 +#define RTCTIME LONG_REF(RTCTIME_ADDR) + +#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ +#define RTCTIME_SECONDS_SHIFT 0 +#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ +#define RTCTIME_MINUTES_SHIFT 16 +#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ +#define RTCTIME_HOURS_SHIFT 24 + +/* + * RTC Alarm Register + */ +#define RTCALRM_ADDR 0xfffffb04 +#define RTCALRM LONG_REF(RTCALRM_ADDR) + +#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ +#define RTCALRM_SECONDS_SHIFT 0 +#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ +#define RTCALRM_MINUTES_SHIFT 16 +#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ +#define RTCALRM_HOURS_SHIFT 24 + +/* + * Watchdog Timer Register + */ +#define WATCHDOG_ADDR 0xfffffb0a +#define WATCHDOG WORD_REF(WATCHDOG_ADDR) + +#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */ +#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */ +#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */ +#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */ +#define WATCHDOG_CNT_SHIFT 8 + +/* + * RTC Control Register + */ +#define RTCCTL_ADDR 0xfffffb0c +#define RTCCTL WORD_REF(RTCCTL_ADDR) + +#define RTCCTL_XTL 0x0020 /* Crystal Selection */ +#define RTCCTL_EN 0x0080 /* RTC Enable */ + +/* '328-compatible definitions */ +#define RTCCTL_384 RTCCTL_XTL +#define RTCCTL_ENABLE RTCCTL_EN + +/* + * RTC Interrupt Status Register + */ +#define RTCISR_ADDR 0xfffffb0e +#define RTCISR WORD_REF(RTCISR_ADDR) + +#define RTCISR_SW 0x0001 /* Stopwatch timed out */ +#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ +#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ +#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ +#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ +#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */ +#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */ +#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */ +#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */ +#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */ +#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */ +#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */ +#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */ +#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */ + +/* + * RTC Interrupt Enable Register + */ +#define RTCIENR_ADDR 0xfffffb10 +#define RTCIENR WORD_REF(RTCIENR_ADDR) + +#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ +#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ +#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ +#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ +#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ +#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */ +#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */ +#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */ +#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */ +#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */ +#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */ +#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */ +#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */ +#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */ + +/* + * Stopwatch Minutes Register + */ +#define STPWCH_ADDR 0xfffffb12 +#define STPWCH WORD_REF(STPWCH) + +#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */ +#define SPTWCH_CNT_SHIFT 0 + +/* + * RTC Day Count Register + */ +#define DAYR_ADDR 0xfffffb1a +#define DAYR WORD_REF(DAYR_ADDR) + +#define DAYR_DAYS_MASK 0x1ff /* Day Setting */ +#define DAYR_DAYS_SHIFT 0 + +/* + * RTC Day Alarm Register + */ +#define DAYALARM_ADDR 0xfffffb1c +#define DAYALARM WORD_REF(DAYALARM_ADDR) + +#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */ +#define DAYALARM_DAYSAL_SHIFT 0 + +/********** + * + * 0xFFFFFCxx -- DRAM Controller + * + **********/ + +/* + * DRAM Memory Configuration Register + */ +#define DRAMMC_ADDR 0xfffffc00 +#define DRAMMC WORD_REF(DRAMMC_ADDR) + +#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */ +#define DRAMMC_ROW12_PA10 0x0000 +#define DRAMMC_ROW12_PA21 0x4000 +#define DRAMMC_ROW12_PA23 0x8000 +#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */ +#define DRAMMC_ROW0_PA11 0x0000 +#define DRAMMC_ROW0_PA22 0x1000 +#define DRAMMC_ROW0_PA23 0x2000 +#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */ +#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */ +#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */ +#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */ +#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */ +#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */ +#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */ +#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */ +#define DRAMMC_REF_SHIFT 0 + +/* + * DRAM Control Register + */ +#define DRAMC_ADDR 0xfffffc02 +#define DRAMC WORD_REF(DRAMC_ADDR) + +#define DRAMC_DWE 0x0001 /* DRAM Write Enable */ +#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */ +#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */ +#define DRAMC_SLW 0x0008 /* Slow RAM */ +#define DRAMC_LSP 0x0010 /* Light Sleep */ +#define DRAMC_MSW 0x0020 /* Slow Multiplexing */ +#define DRAMC_WS_MASK 0x00c0 /* Wait-states */ +#define DRAMC_WS_SHIFT 6 +#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */ +#define DRAMC_PGSZ_SHIFT 8 +#define DRAMC_PGSZ_256K 0x0000 +#define DRAMC_PGSZ_512K 0x0100 +#define DRAMC_PGSZ_1024K 0x0200 +#define DRAMC_PGSZ_2048K 0x0300 +#define DRAMC_EDO 0x0400 /* EDO DRAM */ +#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */ +#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */ +#define DRAMC_BC_SHIFT 12 +#define DRAMC_RM 0x4000 /* Refresh Mode */ +#define DRAMC_EN 0x8000 /* DRAM Controller enable */ + + +/********** + * + * 0xFFFFFDxx -- In-Circuit Emulation (ICE) + * + **********/ + +/* + * ICE Module Address Compare Register + */ +#define ICEMACR_ADDR 0xfffffd00 +#define ICEMACR LONG_REF(ICEMACR_ADDR) + +/* + * ICE Module Address Mask Register + */ +#define ICEMAMR_ADDR 0xfffffd04 +#define ICEMAMR LONG_REF(ICEMAMR_ADDR) + +/* + * ICE Module Control Compare Register + */ +#define ICEMCCR_ADDR 0xfffffd08 +#define ICEMCCR WORD_REF(ICEMCCR_ADDR) + +#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */ +#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */ + +/* + * ICE Module Control Mask Register + */ +#define ICEMCMR_ADDR 0xfffffd0a +#define ICEMCMR WORD_REF(ICEMCMR_ADDR) + +#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */ +#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */ + +/* + * ICE Module Control Register + */ +#define ICEMCR_ADDR 0xfffffd0c +#define ICEMCR WORD_REF(ICEMCR_ADDR) + +#define ICEMCR_CEN 0x0001 /* Compare Enable */ +#define ICEMCR_PBEN 0x0002 /* Program Break Enable */ +#define ICEMCR_SB 0x0004 /* Single Breakpoint */ +#define ICEMCR_HMDIS 0x0008 /* HardMap disable */ +#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */ + +/* + * ICE Module Status Register + */ +#define ICEMSR_ADDR 0xfffffd0e +#define ICEMSR WORD_REF(ICEMSR_ADDR) + +#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */ +#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */ +#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */ +#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */ + +#endif /* _MC68EZ328_H_ */ diff --git a/arch/m68knommu/include/asm/MC68VZ328.h b/arch/m68knommu/include/asm/MC68VZ328.h new file mode 100644 index 000000000000..2b9bf626a0a5 --- /dev/null +++ b/arch/m68knommu/include/asm/MC68VZ328.h @@ -0,0 +1,1349 @@ + +/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers + * + * Copyright (c) 2000-2001 Lineo Inc. + * Copyright (c) 2000-2001 Lineo Canada Corp. + * Copyright (C) 1999 Vladimir Gurevich + * Bare & Hare Software, Inc. + * Based on include/asm-m68knommu/MC68332.h + * Copyright (C) 1998 Kenneth Albanowski , + * The Silver Hammer Group, Ltd. + * + * M68VZ328 fixes by Evan Stawnyczy + * vz multiport fixes by Michael Leslie + */ + +#ifndef _MC68VZ328_H_ +#define _MC68VZ328_H_ + +#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) +#define WORD_REF(addr) (*((volatile unsigned short*)addr)) +#define LONG_REF(addr) (*((volatile unsigned long*)addr)) + +#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) +#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) + +/********** + * + * 0xFFFFF0xx -- System Control + * + **********/ + +/* + * System Control Register (SCR) + */ +#define SCR_ADDR 0xfffff000 +#define SCR BYTE_REF(SCR_ADDR) + +#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ +#define SCR_DMAP 0x04 /* Double Map */ +#define SCR_SO 0x08 /* Supervisor Only */ +#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ +#define SCR_PRV 0x20 /* Privilege Violation */ +#define SCR_WPV 0x40 /* Write Protect Violation */ +#define SCR_BETO 0x80 /* Bus-Error TimeOut */ + +/* + * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility) + */ +#define MRR_ADDR 0xfffff004 +#define MRR LONG_REF(MRR_ADDR) + +/********** + * + * 0xFFFFF1xx -- Chip-Select logic + * + **********/ + +/* + * Chip Select Group Base Registers + */ +#define CSGBA_ADDR 0xfffff100 +#define CSGBB_ADDR 0xfffff102 + +#define CSGBC_ADDR 0xfffff104 +#define CSGBD_ADDR 0xfffff106 + +#define CSGBA WORD_REF(CSGBA_ADDR) +#define CSGBB WORD_REF(CSGBB_ADDR) +#define CSGBC WORD_REF(CSGBC_ADDR) +#define CSGBD WORD_REF(CSGBD_ADDR) + +/* + * Chip Select Registers + */ +#define CSA_ADDR 0xfffff110 +#define CSB_ADDR 0xfffff112 +#define CSC_ADDR 0xfffff114 +#define CSD_ADDR 0xfffff116 + +#define CSA WORD_REF(CSA_ADDR) +#define CSB WORD_REF(CSB_ADDR) +#define CSC WORD_REF(CSC_ADDR) +#define CSD WORD_REF(CSD_ADDR) + +#define CSA_EN 0x0001 /* Chip-Select Enable */ +#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSA_SIZ_SHIFT 1 +#define CSA_WS_MASK 0x0070 /* Wait State */ +#define CSA_WS_SHIFT 4 +#define CSA_BSW 0x0080 /* Data Bus Width */ +#define CSA_FLASH 0x0100 /* FLASH Memory Support */ +#define CSA_RO 0x8000 /* Read-Only */ + +#define CSB_EN 0x0001 /* Chip-Select Enable */ +#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSB_SIZ_SHIFT 1 +#define CSB_WS_MASK 0x0070 /* Wait State */ +#define CSB_WS_SHIFT 4 +#define CSB_BSW 0x0080 /* Data Bus Width */ +#define CSB_FLASH 0x0100 /* FLASH Memory Support */ +#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ +#define CSB_UPSIZ_SHIFT 11 +#define CSB_ROP 0x2000 /* Readonly if protected */ +#define CSB_SOP 0x4000 /* Supervisor only if protected */ +#define CSB_RO 0x8000 /* Read-Only */ + +#define CSC_EN 0x0001 /* Chip-Select Enable */ +#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSC_SIZ_SHIFT 1 +#define CSC_WS_MASK 0x0070 /* Wait State */ +#define CSC_WS_SHIFT 4 +#define CSC_BSW 0x0080 /* Data Bus Width */ +#define CSC_FLASH 0x0100 /* FLASH Memory Support */ +#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ +#define CSC_UPSIZ_SHIFT 11 +#define CSC_ROP 0x2000 /* Readonly if protected */ +#define CSC_SOP 0x4000 /* Supervisor only if protected */ +#define CSC_RO 0x8000 /* Read-Only */ + +#define CSD_EN 0x0001 /* Chip-Select Enable */ +#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSD_SIZ_SHIFT 1 +#define CSD_WS_MASK 0x0070 /* Wait State */ +#define CSD_WS_SHIFT 4 +#define CSD_BSW 0x0080 /* Data Bus Width */ +#define CSD_FLASH 0x0100 /* FLASH Memory Support */ +#define CSD_DRAM 0x0200 /* Dram Selection */ +#define CSD_COMB 0x0400 /* Combining */ +#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ +#define CSD_UPSIZ_SHIFT 11 +#define CSD_ROP 0x2000 /* Readonly if protected */ +#define CSD_SOP 0x4000 /* Supervisor only if protected */ +#define CSD_RO 0x8000 /* Read-Only */ + +/* + * Emulation Chip-Select Register + */ +#define EMUCS_ADDR 0xfffff118 +#define EMUCS WORD_REF(EMUCS_ADDR) + +#define EMUCS_WS_MASK 0x0070 +#define EMUCS_WS_SHIFT 4 + +/********** + * + * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control + * + **********/ + +/* + * PLL Control Register + */ +#define PLLCR_ADDR 0xfffff200 +#define PLLCR WORD_REF(PLLCR_ADDR) + +#define PLLCR_DISPLL 0x0008 /* Disable PLL */ +#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ +#define PLLCR_PRESC 0x0020 /* VCO prescaler */ +#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ +#define PLLCR_SYSCLK_SEL_SHIFT 8 +#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ +#define PLLCR_LCDCLK_SEL_SHIFT 11 + +/* '328-compatible definitions */ +#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK +#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT + +/* + * PLL Frequency Select Register + */ +#define PLLFSR_ADDR 0xfffff202 +#define PLLFSR WORD_REF(PLLFSR_ADDR) + +#define PLLFSR_PC_MASK 0x00ff /* P Count */ +#define PLLFSR_PC_SHIFT 0 +#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ +#define PLLFSR_QC_SHIFT 8 +#define PLLFSR_PROT 0x4000 /* Protect P & Q */ +#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ + +/* + * Power Control Register + */ +#define PCTRL_ADDR 0xfffff207 +#define PCTRL BYTE_REF(PCTRL_ADDR) + +#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ +#define PCTRL_WIDTH_SHIFT 0 +#define PCTRL_PCEN 0x80 /* Power Control Enable */ + +/********** + * + * 0xFFFFF3xx -- Interrupt Controller + * + **********/ + +/* + * Interrupt Vector Register + */ +#define IVR_ADDR 0xfffff300 +#define IVR BYTE_REF(IVR_ADDR) + +#define IVR_VECTOR_MASK 0xF8 + +/* + * Interrupt control Register + */ +#define ICR_ADDR 0xfffff302 +#define ICR WORD_REF(ICR_ADDR) + +#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */ +#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ +#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ +#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ +#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ +#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ +#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ +#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ +#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ + +/* + * Interrupt Mask Register + */ +#define IMR_ADDR 0xfffff304 +#define IMR LONG_REF(IMR_ADDR) + +/* + * Define the names for bit positions first. This is useful for + * request_irq + */ +#define SPI2_IRQ_NUM 0 /* SPI 2 interrupt */ +#define TMR_IRQ_NUM 1 /* Timer 1 interrupt */ +#define UART1_IRQ_NUM 2 /* UART 1 interrupt */ +#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ +#define RTC_IRQ_NUM 4 /* RTC interrupt */ +#define TMR2_IRQ_NUM 5 /* Timer 2 interrupt */ +#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ +#define PWM1_IRQ_NUM 7 /* Pulse-Width Modulator 1 int. */ +#define INT0_IRQ_NUM 8 /* External INT0 */ +#define INT1_IRQ_NUM 9 /* External INT1 */ +#define INT2_IRQ_NUM 10 /* External INT2 */ +#define INT3_IRQ_NUM 11 /* External INT3 */ +#define UART2_IRQ_NUM 12 /* UART 2 interrupt */ +#define PWM2_IRQ_NUM 13 /* Pulse-Width Modulator 1 int. */ +#define IRQ1_IRQ_NUM 16 /* IRQ1 */ +#define IRQ2_IRQ_NUM 17 /* IRQ2 */ +#define IRQ3_IRQ_NUM 18 /* IRQ3 */ +#define IRQ6_IRQ_NUM 19 /* IRQ6 */ +#define IRQ5_IRQ_NUM 20 /* IRQ5 */ +#define SPI1_IRQ_NUM 21 /* SPI 1 interrupt */ +#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */ +#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */ + +#define SPI_IRQ_NUM SPI2_IRQ_NUM + +/* '328-compatible definitions */ +#define SPIM_IRQ_NUM SPI_IRQ_NUM +#define TMR1_IRQ_NUM TMR_IRQ_NUM +#define UART_IRQ_NUM UART1_IRQ_NUM + +/* + * Here go the bitmasks themselves + */ +#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */ +#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */ +#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ +#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ +#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ +#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ +#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ +#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ +#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ +#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ +#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ +#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ +#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ +#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ +#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ +#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */ +#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */ +#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */ + +/* '328-compatible definitions */ +#define IMR_MSPIM IMR_MSPI +#define IMR_MTMR1 IMR_MTMR + +/* + * Interrupt Status Register + */ +#define ISR_ADDR 0xfffff30c +#define ISR LONG_REF(ISR_ADDR) + +#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ +#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ +#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ +#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ +#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ +#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ +#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ +#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ +#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ +#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ +#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ +#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ +#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ +#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ +#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ +#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ +#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ +#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ + +/* '328-compatible definitions */ +#define ISR_SPIM ISR_SPI +#define ISR_TMR1 ISR_TMR + +/* + * Interrupt Pending Register + */ +#define IPR_ADDR 0xfffff30c +#define IPR LONG_REF(IPR_ADDR) + +#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ +#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ +#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ +#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ +#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ +#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ +#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ +#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ +#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ +#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ +#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ +#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ +#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ +#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ +#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ +#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ +#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ +#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ + +/* '328-compatible definitions */ +#define IPR_SPIM IPR_SPI +#define IPR_TMR1 IPR_TMR + +/********** + * + * 0xFFFFF4xx -- Parallel Ports + * + **********/ + +/* + * Port A + */ +#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ +#define PADATA_ADDR 0xfffff401 /* Port A data register */ +#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */ + +#define PADIR BYTE_REF(PADIR_ADDR) +#define PADATA BYTE_REF(PADATA_ADDR) +#define PAPUEN BYTE_REF(PAPUEN_ADDR) + +#define PA(x) (1 << (x)) + +/* + * Port B + */ +#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ +#define PBDATA_ADDR 0xfffff409 /* Port B data register */ +#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */ +#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ + +#define PBDIR BYTE_REF(PBDIR_ADDR) +#define PBDATA BYTE_REF(PBDATA_ADDR) +#define PBPUEN BYTE_REF(PBPUEN_ADDR) +#define PBSEL BYTE_REF(PBSEL_ADDR) + +#define PB(x) (1 << (x)) + +#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */ +#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */ +#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */ +#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */ +#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */ +#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */ +#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */ +#define PB_PWMO 0x80 /* Use PWMO as PB[7] */ + +/* + * Port C + */ +#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ +#define PCDATA_ADDR 0xfffff411 /* Port C data register */ +#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */ +#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ + +#define PCDIR BYTE_REF(PCDIR_ADDR) +#define PCDATA BYTE_REF(PCDATA_ADDR) +#define PCPDEN BYTE_REF(PCPDEN_ADDR) +#define PCSEL BYTE_REF(PCSEL_ADDR) + +#define PC(x) (1 << (x)) + +#define PC_LD0 0x01 /* Use LD0 as PC[0] */ +#define PC_LD1 0x02 /* Use LD1 as PC[1] */ +#define PC_LD2 0x04 /* Use LD2 as PC[2] */ +#define PC_LD3 0x08 /* Use LD3 as PC[3] */ +#define PC_LFLM 0x10 /* Use LFLM as PC[4] */ +#define PC_LLP 0x20 /* Use LLP as PC[5] */ +#define PC_LCLK 0x40 /* Use LCLK as PC[6] */ +#define PC_LACD 0x80 /* Use LACD as PC[7] */ + +/* + * Port D + */ +#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ +#define PDDATA_ADDR 0xfffff419 /* Port D data register */ +#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ +#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */ +#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ +#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ +#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */ +#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ + +#define PDDIR BYTE_REF(PDDIR_ADDR) +#define PDDATA BYTE_REF(PDDATA_ADDR) +#define PDPUEN BYTE_REF(PDPUEN_ADDR) +#define PDSEL BYTE_REF(PDSEL_ADDR) +#define PDPOL BYTE_REF(PDPOL_ADDR) +#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) +#define PDKBEN BYTE_REF(PDKBEN_ADDR) +#define PDIQEG BYTE_REF(PDIQEG_ADDR) + +#define PD(x) (1 << (x)) + +#define PD_INT0 0x01 /* Use INT0 as PD[0] */ +#define PD_INT1 0x02 /* Use INT1 as PD[1] */ +#define PD_INT2 0x04 /* Use INT2 as PD[2] */ +#define PD_INT3 0x08 /* Use INT3 as PD[3] */ +#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */ +#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */ +#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */ +#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */ + +/* + * Port E + */ +#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ +#define PEDATA_ADDR 0xfffff421 /* Port E data register */ +#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ +#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ + +#define PEDIR BYTE_REF(PEDIR_ADDR) +#define PEDATA BYTE_REF(PEDATA_ADDR) +#define PEPUEN BYTE_REF(PEPUEN_ADDR) +#define PESEL BYTE_REF(PESEL_ADDR) + +#define PE(x) (1 << (x)) + +#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */ +#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */ +#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */ +#define PE_DWE 0x08 /* Use DWE as PE[3] */ +#define PE_RXD 0x10 /* Use RXD as PE[4] */ +#define PE_TXD 0x20 /* Use TXD as PE[5] */ +#define PE_RTS 0x40 /* Use RTS as PE[6] */ +#define PE_CTS 0x80 /* Use CTS as PE[7] */ + +/* + * Port F + */ +#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ +#define PFDATA_ADDR 0xfffff429 /* Port F data register */ +#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ +#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ + +#define PFDIR BYTE_REF(PFDIR_ADDR) +#define PFDATA BYTE_REF(PFDATA_ADDR) +#define PFPUEN BYTE_REF(PFPUEN_ADDR) +#define PFSEL BYTE_REF(PFSEL_ADDR) + +#define PF(x) (1 << (x)) + +#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */ +#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */ +#define PF_CLKO 0x04 /* Use CLKO as PF[2] */ +#define PF_A20 0x08 /* Use A20 as PF[3] */ +#define PF_A21 0x10 /* Use A21 as PF[4] */ +#define PF_A22 0x20 /* Use A22 as PF[5] */ +#define PF_A23 0x40 /* Use A23 as PF[6] */ +#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */ + +/* + * Port G + */ +#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ +#define PGDATA_ADDR 0xfffff431 /* Port G data register */ +#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ +#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ + +#define PGDIR BYTE_REF(PGDIR_ADDR) +#define PGDATA BYTE_REF(PGDATA_ADDR) +#define PGPUEN BYTE_REF(PGPUEN_ADDR) +#define PGSEL BYTE_REF(PGSEL_ADDR) + +#define PG(x) (1 << (x)) + +#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */ +#define PG_A0 0x02 /* Use A0 as PG[1] */ +#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */ +#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */ +#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */ +#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */ + +/* + * Port J + */ +#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ +#define PJDATA_ADDR 0xfffff439 /* Port J data register */ +#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enb. reg */ +#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */ + +#define PJDIR BYTE_REF(PJDIR_ADDR) +#define PJDATA BYTE_REF(PJDATA_ADDR) +#define PJPUEN BYTE_REF(PJPUEN_ADDR) +#define PJSEL BYTE_REF(PJSEL_ADDR) + +#define PJ(x) (1 << (x)) + +/* + * Port K + */ +#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */ +#define PKDATA_ADDR 0xfffff441 /* Port K data register */ +#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enb. reg */ +#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */ + +#define PKDIR BYTE_REF(PKDIR_ADDR) +#define PKDATA BYTE_REF(PKDATA_ADDR) +#define PKPUEN BYTE_REF(PKPUEN_ADDR) +#define PKSEL BYTE_REF(PKSEL_ADDR) + +#define PK(x) (1 << (x)) + +#define PK_DATAREADY 0x01 /* Use ~DATA_READY as PK[0] */ +#define PK_PWM2 0x01 /* Use PWM2 as PK[0] */ +#define PK_R_W 0x02 /* Use R/W as PK[1] */ +#define PK_LDS 0x04 /* Use /LDS as PK[2] */ +#define PK_UDS 0x08 /* Use /UDS as PK[3] */ +#define PK_LD4 0x10 /* Use LD4 as PK[4] */ +#define PK_LD5 0x20 /* Use LD5 as PK[5] */ +#define PK_LD6 0x40 /* Use LD6 as PK[6] */ +#define PK_LD7 0x80 /* Use LD7 as PK[7] */ + +#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ +#define PJDATA_ADDR 0xfffff439 /* Port J data register */ +#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enable reg */ +#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */ + +#define PJDIR BYTE_REF(PJDIR_ADDR) +#define PJDATA BYTE_REF(PJDATA_ADDR) +#define PJPUEN BYTE_REF(PJPUEN_ADDR) +#define PJSEL BYTE_REF(PJSEL_ADDR) + +#define PJ(x) (1 << (x)) + +#define PJ_MOSI 0x01 /* Use MOSI as PJ[0] */ +#define PJ_MISO 0x02 /* Use MISO as PJ[1] */ +#define PJ_SPICLK1 0x04 /* Use SPICLK1 as PJ[2] */ +#define PJ_SS 0x08 /* Use SS as PJ[3] */ +#define PJ_RXD2 0x10 /* Use RXD2 as PJ[4] */ +#define PJ_TXD2 0x20 /* Use TXD2 as PJ[5] */ +#define PJ_RTS2 0x40 /* Use RTS2 as PJ[5] */ +#define PJ_CTS2 0x80 /* Use CTS2 as PJ[5] */ + +/* + * Port M + */ +#define PMDIR_ADDR 0xfffff448 /* Port M direction reg */ +#define PMDATA_ADDR 0xfffff449 /* Port M data register */ +#define PMPUEN_ADDR 0xfffff44a /* Port M Pull-Up enable reg */ +#define PMSEL_ADDR 0xfffff44b /* Port M Select Register */ + +#define PMDIR BYTE_REF(PMDIR_ADDR) +#define PMDATA BYTE_REF(PMDATA_ADDR) +#define PMPUEN BYTE_REF(PMPUEN_ADDR) +#define PMSEL BYTE_REF(PMSEL_ADDR) + +#define PM(x) (1 << (x)) + +#define PM_SDCLK 0x01 /* Use SDCLK as PM[0] */ +#define PM_SDCE 0x02 /* Use SDCE as PM[1] */ +#define PM_DQMH 0x04 /* Use DQMH as PM[2] */ +#define PM_DQML 0x08 /* Use DQML as PM[3] */ +#define PM_SDA10 0x10 /* Use SDA10 as PM[4] */ +#define PM_DMOE 0x20 /* Use DMOE as PM[5] */ + +/********** + * + * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) + * + **********/ + +/* + * PWM Control Register + */ +#define PWMC_ADDR 0xfffff500 +#define PWMC WORD_REF(PWMC_ADDR) + +#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */ +#define PWMC_CLKSEL_SHIFT 0 +#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */ +#define PWMC_REPEAT_SHIFT 2 +#define PWMC_EN 0x0010 /* Enable PWM */ +#define PMNC_FIFOAV 0x0020 /* FIFO Available */ +#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */ +#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */ +#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */ +#define PWMC_PRESCALER_SHIFT 8 +#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ + +/* '328-compatible definitions */ +#define PWMC_PWMEN PWMC_EN + +/* + * PWM Sample Register + */ +#define PWMS_ADDR 0xfffff502 +#define PWMS WORD_REF(PWMS_ADDR) + +/* + * PWM Period Register + */ +#define PWMP_ADDR 0xfffff504 +#define PWMP BYTE_REF(PWMP_ADDR) + +/* + * PWM Counter Register + */ +#define PWMCNT_ADDR 0xfffff505 +#define PWMCNT BYTE_REF(PWMCNT_ADDR) + +/********** + * + * 0xFFFFF6xx -- General-Purpose Timer + * + **********/ + +/* + * Timer Control register + */ +#define TCTL_ADDR 0xfffff600 +#define TCTL WORD_REF(TCTL_ADDR) + +#define TCTL_TEN 0x0001 /* Timer Enable */ +#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ +#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ +#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ +#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ +#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ +#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ +#define TCTL_IRQEN 0x0010 /* IRQ Enable */ +#define TCTL_OM 0x0020 /* Output Mode */ +#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ +#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ +#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ +#define TCTL_FRR 0x0010 /* Free-Run Mode */ + +/* '328-compatible definitions */ +#define TCTL1_ADDR TCTL_ADDR +#define TCTL1 TCTL + +/* + * Timer Prescaler Register + */ +#define TPRER_ADDR 0xfffff602 +#define TPRER WORD_REF(TPRER_ADDR) + +/* '328-compatible definitions */ +#define TPRER1_ADDR TPRER_ADDR +#define TPRER1 TPRER + +/* + * Timer Compare Register + */ +#define TCMP_ADDR 0xfffff604 +#define TCMP WORD_REF(TCMP_ADDR) + +/* '328-compatible definitions */ +#define TCMP1_ADDR TCMP_ADDR +#define TCMP1 TCMP + +/* + * Timer Capture register + */ +#define TCR_ADDR 0xfffff606 +#define TCR WORD_REF(TCR_ADDR) + +/* '328-compatible definitions */ +#define TCR1_ADDR TCR_ADDR +#define TCR1 TCR + +/* + * Timer Counter Register + */ +#define TCN_ADDR 0xfffff608 +#define TCN WORD_REF(TCN_ADDR) + +/* '328-compatible definitions */ +#define TCN1_ADDR TCN_ADDR +#define TCN1 TCN + +/* + * Timer Status Register + */ +#define TSTAT_ADDR 0xfffff60a +#define TSTAT WORD_REF(TSTAT_ADDR) + +#define TSTAT_COMP 0x0001 /* Compare Event occurred */ +#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ + +/* '328-compatible definitions */ +#define TSTAT1_ADDR TSTAT_ADDR +#define TSTAT1 TSTAT + +/********** + * + * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) + * + **********/ + +/* + * SPIM Data Register + */ +#define SPIMDATA_ADDR 0xfffff800 +#define SPIMDATA WORD_REF(SPIMDATA_ADDR) + +/* + * SPIM Control/Status Register + */ +#define SPIMCONT_ADDR 0xfffff802 +#define SPIMCONT WORD_REF(SPIMCONT_ADDR) + +#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ +#define SPIMCONT_BIT_COUNT_SHIFT 0 +#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ +#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ +#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ +#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */ +#define SPIMCONT_XCH 0x0100 /* Exchange */ +#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */ +#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ +#define SPIMCONT_DATA_RATE_SHIFT 13 + +/* '328-compatible definitions */ +#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ +#define SPIMCONT_SPIMEN SPIMCONT_ENABLE + +/********** + * + * 0xFFFFF9xx -- UART + * + **********/ + +/* + * UART Status/Control Register + */ + +#define USTCNT_ADDR 0xfffff900 +#define USTCNT WORD_REF(USTCNT_ADDR) + +#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */ +#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */ +#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */ +#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */ +#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */ +#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */ +#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */ +#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */ +#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ +#define USTCNT_STOP 0x0200 /* Stop bit transmission */ +#define USTCNT_ODD 0x0400 /* Odd Parity */ +#define USTCNT_PEN 0x0800 /* Parity Enable */ +#define USTCNT_CLKM 0x1000 /* Clock Mode Select */ +#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ +#define USTCNT_RXEN 0x4000 /* Receiver Enable */ +#define USTCNT_UEN 0x8000 /* UART Enable */ + +/* '328-compatible definitions */ +#define USTCNT_TXAVAILEN USTCNT_TXAE +#define USTCNT_TXHALFEN USTCNT_TXHE +#define USTCNT_TXEMPTYEN USTCNT_TXEE +#define USTCNT_RXREADYEN USTCNT_RXRE +#define USTCNT_RXHALFEN USTCNT_RXHE +#define USTCNT_RXFULLEN USTCNT_RXFE +#define USTCNT_CTSDELTAEN USTCNT_CTSD +#define USTCNT_ODD_EVEN USTCNT_ODD +#define USTCNT_PARITYEN USTCNT_PEN +#define USTCNT_CLKMODE USTCNT_CLKM +#define USTCNT_UARTEN USTCNT_UEN + +/* + * UART Baud Control Register + */ +#define UBAUD_ADDR 0xfffff902 +#define UBAUD WORD_REF(UBAUD_ADDR) + +#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ +#define UBAUD_PRESCALER_SHIFT 0 +#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ +#define UBAUD_DIVIDE_SHIFT 8 +#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ +#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */ + +/* + * UART Receiver Register + */ +#define URX_ADDR 0xfffff904 +#define URX WORD_REF(URX_ADDR) + +#define URX_RXDATA_ADDR 0xfffff905 +#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) + +#define URX_RXDATA_MASK 0x00ff /* Received data */ +#define URX_RXDATA_SHIFT 0 +#define URX_PARITY_ERROR 0x0100 /* Parity Error */ +#define URX_BREAK 0x0200 /* Break Detected */ +#define URX_FRAME_ERROR 0x0400 /* Framing Error */ +#define URX_OVRUN 0x0800 /* Serial Overrun */ +#define URX_OLD_DATA 0x1000 /* Old data in FIFO */ +#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ +#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ +#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ + +/* + * UART Transmitter Register + */ +#define UTX_ADDR 0xfffff906 +#define UTX WORD_REF(UTX_ADDR) + +#define UTX_TXDATA_ADDR 0xfffff907 +#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) + +#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ +#define UTX_TXDATA_SHIFT 0 +#define UTX_CTS_DELTA 0x0100 /* CTS changed */ +#define UTX_CTS_STAT 0x0200 /* CTS State */ +#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */ +#define UTX_NOCTS 0x0800 /* Ignore CTS */ +#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ +#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ +#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ +#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ + +/* '328-compatible definitions */ +#define UTX_CTS_STATUS UTX_CTS_STAT +#define UTX_IGNORE_CTS UTX_NOCTS + +/* + * UART Miscellaneous Register + */ +#define UMISC_ADDR 0xfffff908 +#define UMISC WORD_REF(UMISC_ADDR) + +#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ +#define UMISC_RX_POL 0x0008 /* Receive Polarity */ +#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ +#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ +#define UMISC_RTS 0x0040 /* Set RTS status */ +#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ +#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */ +#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */ +#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ +#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ +#define UMISC_CLKSRC 0x4000 /* Clock Source */ +#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */ + +/* + * UART Non-integer Prescaler Register + */ +#define NIPR_ADDR 0xfffff90a +#define NIPR WORD_REF(NIPR_ADDR) + +#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */ +#define NIPR_STEP_VALUE_SHIFT 0 +#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */ +#define NIPR_SELECT_SHIFT 8 +#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */ + + +/* generalization of uart control registers to support multiple ports: */ +typedef struct { + volatile unsigned short int ustcnt; + volatile unsigned short int ubaud; + union { + volatile unsigned short int w; + struct { + volatile unsigned char status; + volatile unsigned char rxdata; + } b; + } urx; + union { + volatile unsigned short int w; + struct { + volatile unsigned char status; + volatile unsigned char txdata; + } b; + } utx; + volatile unsigned short int umisc; + volatile unsigned short int nipr; + volatile unsigned short int hmark; + volatile unsigned short int unused; +} __attribute__((packed)) m68328_uart; + + + + +/********** + * + * 0xFFFFFAxx -- LCD Controller + * + **********/ + +/* + * LCD Screen Starting Address Register + */ +#define LSSA_ADDR 0xfffffa00 +#define LSSA LONG_REF(LSSA_ADDR) + +#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */ + +/* + * LCD Virtual Page Width Register + */ +#define LVPW_ADDR 0xfffffa05 +#define LVPW BYTE_REF(LVPW_ADDR) + +/* + * LCD Screen Width Register (not compatible with '328 !!!) + */ +#define LXMAX_ADDR 0xfffffa08 +#define LXMAX WORD_REF(LXMAX_ADDR) + +#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */ + +/* + * LCD Screen Height Register + */ +#define LYMAX_ADDR 0xfffffa0a +#define LYMAX WORD_REF(LYMAX_ADDR) + +#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */ + +/* + * LCD Cursor X Position Register + */ +#define LCXP_ADDR 0xfffffa18 +#define LCXP WORD_REF(LCXP_ADDR) + +#define LCXP_CC_MASK 0xc000 /* Cursor Control */ +#define LCXP_CC_TRAMSPARENT 0x0000 +#define LCXP_CC_BLACK 0x4000 +#define LCXP_CC_REVERSED 0x8000 +#define LCXP_CC_WHITE 0xc000 +#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ + +/* + * LCD Cursor Y Position Register + */ +#define LCYP_ADDR 0xfffffa1a +#define LCYP WORD_REF(LCYP_ADDR) + +#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ + +/* + * LCD Cursor Width and Heigth Register + */ +#define LCWCH_ADDR 0xfffffa1c +#define LCWCH WORD_REF(LCWCH_ADDR) + +#define LCWCH_CH_MASK 0x001f /* Cursor Height */ +#define LCWCH_CH_SHIFT 0 +#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ +#define LCWCH_CW_SHIFT 8 + +/* + * LCD Blink Control Register + */ +#define LBLKC_ADDR 0xfffffa1f +#define LBLKC BYTE_REF(LBLKC_ADDR) + +#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ +#define LBLKC_BD_SHIFT 0 +#define LBLKC_BKEN 0x80 /* Blink Enabled */ + +/* + * LCD Panel Interface Configuration Register + */ +#define LPICF_ADDR 0xfffffa20 +#define LPICF BYTE_REF(LPICF_ADDR) + +#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */ +#define LPICF_GS_BW 0x00 +#define LPICF_GS_GRAY_4 0x01 +#define LPICF_GS_GRAY_16 0x02 +#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */ +#define LPICF_PBSIZ_1 0x00 +#define LPICF_PBSIZ_2 0x04 +#define LPICF_PBSIZ_4 0x08 + +/* + * LCD Polarity Configuration Register + */ +#define LPOLCF_ADDR 0xfffffa21 +#define LPOLCF BYTE_REF(LPOLCF_ADDR) + +#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ +#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ +#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ +#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ + +/* + * LACD (LCD Alternate Crystal Direction) Rate Control Register + */ +#define LACDRC_ADDR 0xfffffa23 +#define LACDRC BYTE_REF(LACDRC_ADDR) + +#define LACDRC_ACDSLT 0x80 /* Signal Source Select */ +#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ +#define LACDRC_ACD_SHIFT 0 + +/* + * LCD Pixel Clock Divider Register + */ +#define LPXCD_ADDR 0xfffffa25 +#define LPXCD BYTE_REF(LPXCD_ADDR) + +#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ +#define LPXCD_PCD_SHIFT 0 + +/* + * LCD Clocking Control Register + */ +#define LCKCON_ADDR 0xfffffa27 +#define LCKCON BYTE_REF(LCKCON_ADDR) + +#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */ +#define LCKCON_DWS_SHIFT 0 +#define LCKCON_DWIDTH 0x40 /* Display Memory Width */ +#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ + +/* '328-compatible definitions */ +#define LCKCON_DW_MASK LCKCON_DWS_MASK +#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT + +/* + * LCD Refresh Rate Adjustment Register + */ +#define LRRA_ADDR 0xfffffa29 +#define LRRA BYTE_REF(LRRA_ADDR) + +/* + * LCD Panning Offset Register + */ +#define LPOSR_ADDR 0xfffffa2d +#define LPOSR BYTE_REF(LPOSR_ADDR) + +#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */ +#define LPOSR_POS_SHIFT 0 + +/* + * LCD Frame Rate Control Modulation Register + */ +#define LFRCM_ADDR 0xfffffa31 +#define LFRCM BYTE_REF(LFRCM_ADDR) + +#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ +#define LFRCM_YMOD_SHIFT 0 +#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ +#define LFRCM_XMOD_SHIFT 4 + +/* + * LCD Gray Palette Mapping Register + */ +#define LGPMR_ADDR 0xfffffa33 +#define LGPMR BYTE_REF(LGPMR_ADDR) + +#define LGPMR_G1_MASK 0x0f +#define LGPMR_G1_SHIFT 0 +#define LGPMR_G2_MASK 0xf0 +#define LGPMR_G2_SHIFT 4 + +/* + * PWM Contrast Control Register + */ +#define PWMR_ADDR 0xfffffa36 +#define PWMR WORD_REF(PWMR_ADDR) + +#define PWMR_PW_MASK 0x00ff /* Pulse Width */ +#define PWMR_PW_SHIFT 0 +#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */ +#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */ +#define PWMR_SRC_LINE 0x0000 /* Line Pulse */ +#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */ +#define PWMR_SRC_LCD 0x4000 /* LCD clock */ + +/********** + * + * 0xFFFFFBxx -- Real-Time Clock (RTC) + * + **********/ + +/* + * RTC Hours Minutes and Seconds Register + */ +#define RTCTIME_ADDR 0xfffffb00 +#define RTCTIME LONG_REF(RTCTIME_ADDR) + +#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ +#define RTCTIME_SECONDS_SHIFT 0 +#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ +#define RTCTIME_MINUTES_SHIFT 16 +#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ +#define RTCTIME_HOURS_SHIFT 24 + +/* + * RTC Alarm Register + */ +#define RTCALRM_ADDR 0xfffffb04 +#define RTCALRM LONG_REF(RTCALRM_ADDR) + +#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ +#define RTCALRM_SECONDS_SHIFT 0 +#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ +#define RTCALRM_MINUTES_SHIFT 16 +#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ +#define RTCALRM_HOURS_SHIFT 24 + +/* + * Watchdog Timer Register + */ +#define WATCHDOG_ADDR 0xfffffb0a +#define WATCHDOG WORD_REF(WATCHDOG_ADDR) + +#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */ +#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */ +#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */ +#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */ +#define WATCHDOG_CNT_SHIFT 8 + +/* + * RTC Control Register + */ +#define RTCCTL_ADDR 0xfffffb0c +#define RTCCTL WORD_REF(RTCCTL_ADDR) + +#define RTCCTL_XTL 0x0020 /* Crystal Selection */ +#define RTCCTL_EN 0x0080 /* RTC Enable */ + +/* '328-compatible definitions */ +#define RTCCTL_384 RTCCTL_XTL +#define RTCCTL_ENABLE RTCCTL_EN + +/* + * RTC Interrupt Status Register + */ +#define RTCISR_ADDR 0xfffffb0e +#define RTCISR WORD_REF(RTCISR_ADDR) + +#define RTCISR_SW 0x0001 /* Stopwatch timed out */ +#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ +#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ +#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ +#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ +#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */ +#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */ +#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */ +#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */ +#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */ +#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */ +#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */ +#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */ +#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */ + +/* + * RTC Interrupt Enable Register + */ +#define RTCIENR_ADDR 0xfffffb10 +#define RTCIENR WORD_REF(RTCIENR_ADDR) + +#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ +#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ +#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ +#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ +#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ +#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */ +#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */ +#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */ +#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */ +#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */ +#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */ +#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */ +#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */ +#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */ + +/* + * Stopwatch Minutes Register + */ +#define STPWCH_ADDR 0xfffffb12 +#define STPWCH WORD_REF(STPWCH_ADDR) + +#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */ +#define SPTWCH_CNT_SHIFT 0 + +/* + * RTC Day Count Register + */ +#define DAYR_ADDR 0xfffffb1a +#define DAYR WORD_REF(DAYR_ADDR) + +#define DAYR_DAYS_MASK 0x1ff /* Day Setting */ +#define DAYR_DAYS_SHIFT 0 + +/* + * RTC Day Alarm Register + */ +#define DAYALARM_ADDR 0xfffffb1c +#define DAYALARM WORD_REF(DAYALARM_ADDR) + +#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */ +#define DAYALARM_DAYSAL_SHIFT 0 + +/********** + * + * 0xFFFFFCxx -- DRAM Controller + * + **********/ + +/* + * DRAM Memory Configuration Register + */ +#define DRAMMC_ADDR 0xfffffc00 +#define DRAMMC WORD_REF(DRAMMC_ADDR) + +#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */ +#define DRAMMC_ROW12_PA10 0x0000 +#define DRAMMC_ROW12_PA21 0x4000 +#define DRAMMC_ROW12_PA23 0x8000 +#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */ +#define DRAMMC_ROW0_PA11 0x0000 +#define DRAMMC_ROW0_PA22 0x1000 +#define DRAMMC_ROW0_PA23 0x2000 +#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */ +#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */ +#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */ +#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */ +#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */ +#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */ +#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */ +#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */ +#define DRAMMC_REF_SHIFT 0 + +/* + * DRAM Control Register + */ +#define DRAMC_ADDR 0xfffffc02 +#define DRAMC WORD_REF(DRAMC_ADDR) + +#define DRAMC_DWE 0x0001 /* DRAM Write Enable */ +#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */ +#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */ +#define DRAMC_SLW 0x0008 /* Slow RAM */ +#define DRAMC_LSP 0x0010 /* Light Sleep */ +#define DRAMC_MSW 0x0020 /* Slow Multiplexing */ +#define DRAMC_WS_MASK 0x00c0 /* Wait-states */ +#define DRAMC_WS_SHIFT 6 +#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */ +#define DRAMC_PGSZ_SHIFT 8 +#define DRAMC_PGSZ_256K 0x0000 +#define DRAMC_PGSZ_512K 0x0100 +#define DRAMC_PGSZ_1024K 0x0200 +#define DRAMC_PGSZ_2048K 0x0300 +#define DRAMC_EDO 0x0400 /* EDO DRAM */ +#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */ +#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */ +#define DRAMC_BC_SHIFT 12 +#define DRAMC_RM 0x4000 /* Refresh Mode */ +#define DRAMC_EN 0x8000 /* DRAM Controller enable */ + + +/********** + * + * 0xFFFFFDxx -- In-Circuit Emulation (ICE) + * + **********/ + +/* + * ICE Module Address Compare Register + */ +#define ICEMACR_ADDR 0xfffffd00 +#define ICEMACR LONG_REF(ICEMACR_ADDR) + +/* + * ICE Module Address Mask Register + */ +#define ICEMAMR_ADDR 0xfffffd04 +#define ICEMAMR LONG_REF(ICEMAMR_ADDR) + +/* + * ICE Module Control Compare Register + */ +#define ICEMCCR_ADDR 0xfffffd08 +#define ICEMCCR WORD_REF(ICEMCCR_ADDR) + +#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */ +#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */ + +/* + * ICE Module Control Mask Register + */ +#define ICEMCMR_ADDR 0xfffffd0a +#define ICEMCMR WORD_REF(ICEMCMR_ADDR) + +#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */ +#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */ + +/* + * ICE Module Control Register + */ +#define ICEMCR_ADDR 0xfffffd0c +#define ICEMCR WORD_REF(ICEMCR_ADDR) + +#define ICEMCR_CEN 0x0001 /* Compare Enable */ +#define ICEMCR_PBEN 0x0002 /* Program Break Enable */ +#define ICEMCR_SB 0x0004 /* Single Breakpoint */ +#define ICEMCR_HMDIS 0x0008 /* HardMap disable */ +#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */ + +/* + * ICE Module Status Register + */ +#define ICEMSR_ADDR 0xfffffd0e +#define ICEMSR WORD_REF(ICEMSR_ADDR) + +#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */ +#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */ +#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */ +#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */ + +#endif /* _MC68VZ328_H_ */ diff --git a/arch/m68knommu/include/asm/a.out.h b/arch/m68knommu/include/asm/a.out.h new file mode 100644 index 000000000000..ce18ef99de04 --- /dev/null +++ b/arch/m68knommu/include/asm/a.out.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/anchor.h b/arch/m68knommu/include/asm/anchor.h new file mode 100644 index 000000000000..871c0d5cfc3d --- /dev/null +++ b/arch/m68knommu/include/asm/anchor.h @@ -0,0 +1,112 @@ +/****************************************************************************/ + +/* + * anchor.h -- Anchor CO-MEM Lite PCI host bridge part. + * + * (C) Copyright 2000, Moreton Bay (www.moreton.com.au) + */ + +/****************************************************************************/ +#ifndef anchor_h +#define anchor_h +/****************************************************************************/ + +/* + * Define basic addressing info. + */ +#if defined(CONFIG_M5407C3) +#define COMEM_BASE 0xFFFF0000 /* Base of CO-MEM address space */ +#define COMEM_IRQ 25 /* IRQ of anchor part */ +#else +#define COMEM_BASE 0x80000000 /* Base of CO-MEM address space */ +#define COMEM_IRQ 25 /* IRQ of anchor part */ +#endif + +/****************************************************************************/ + +/* + * 4-byte registers of CO-MEM, so adjust register addresses for + * easy access. Handy macro for word access too. + */ +#define LREG(a) ((a) >> 2) +#define WREG(a) ((a) >> 1) + + +/* + * Define base addresses within CO-MEM Lite register address space. + */ +#define COMEM_I2O 0x0000 /* I2O registers */ +#define COMEM_OPREGS 0x0400 /* Operation registers */ +#define COMEM_PCIBUS 0x2000 /* Direct access to PCI bus */ +#define COMEM_SHMEM 0x4000 /* Shared memory region */ + +#define COMEM_SHMEMSIZE 0x4000 /* Size of shared memory */ + + +/* + * Define CO-MEM Registers. + */ +#define COMEM_I2OHISR 0x0030 /* I2O host interrupt status */ +#define COMEM_I2OHIMR 0x0034 /* I2O host interrupt mask */ +#define COMEM_I2OLISR 0x0038 /* I2O local interrupt status */ +#define COMEM_I2OLIMR 0x003c /* I2O local interrupt mask */ +#define COMEM_IBFPFIFO 0x0040 /* I2O inbound free/post FIFO */ +#define COMEM_OBPFFIFO 0x0044 /* I2O outbound post/free FIFO */ +#define COMEM_IBPFFIFO 0x0048 /* I2O inbound post/free FIFO */ +#define COMEM_OBFPFIFO 0x004c /* I2O outbound free/post FIFO */ + +#define COMEM_DAHBASE 0x0460 /* Direct access base address */ + +#define COMEM_NVCMD 0x04a0 /* I2C serial command */ +#define COMEM_NVREAD 0x04a4 /* I2C serial read */ +#define COMEM_NVSTAT 0x04a8 /* I2C status */ + +#define COMEM_DMALBASE 0x04b0 /* DMA local base address */ +#define COMEM_DMAHBASE 0x04b4 /* DMA host base address */ +#define COMEM_DMASIZE 0x04b8 /* DMA size */ +#define COMEM_DMACTL 0x04bc /* DMA control */ + +#define COMEM_HCTL 0x04e0 /* Host control */ +#define COMEM_HINT 0x04e4 /* Host interrupt control/status */ +#define COMEM_HLDATA 0x04e8 /* Host to local data mailbox */ +#define COMEM_LINT 0x04f4 /* Local interrupt contole status */ +#define COMEM_LHDATA 0x04f8 /* Local to host data mailbox */ + +#define COMEM_LBUSCFG 0x04fc /* Local bus configuration */ + + +/* + * Commands and flags for use with Direct Access Register. + */ +#define COMEM_DA_IACK 0x00000000 /* Interrupt acknowledge (read) */ +#define COMEM_DA_SPCL 0x00000010 /* Special cycle (write) */ +#define COMEM_DA_MEMRD 0x00000004 /* Memory read cycle */ +#define COMEM_DA_MEMWR 0x00000004 /* Memory write cycle */ +#define COMEM_DA_IORD 0x00000002 /* I/O read cycle */ +#define COMEM_DA_IOWR 0x00000002 /* I/O write cycle */ +#define COMEM_DA_CFGRD 0x00000006 /* Configuration read cycle */ +#define COMEM_DA_CFGWR 0x00000006 /* Configuration write cycle */ + +#define COMEM_DA_ADDR(a) ((a) & 0xffffe000) + +#define COMEM_DA_OFFSET(a) ((a) & 0x00001fff) + + +/* + * The PCI bus will be limited in what slots will actually be used. + * Define valid device numbers for different boards. + */ +#if defined(CONFIG_M5407C3) +#define COMEM_MINDEV 14 /* Minimum valid DEVICE */ +#define COMEM_MAXDEV 14 /* Maximum valid DEVICE */ +#define COMEM_BRIDGEDEV 15 /* Slot bridge is in */ +#else +#define COMEM_MINDEV 0 /* Minimum valid DEVICE */ +#define COMEM_MAXDEV 3 /* Maximum valid DEVICE */ +#endif + +#define COMEM_MAXPCI (COMEM_MAXDEV+1) /* Maximum PCI devices */ + + +/****************************************************************************/ +#endif /* anchor_h */ diff --git a/arch/m68knommu/include/asm/atomic.h b/arch/m68knommu/include/asm/atomic.h new file mode 100644 index 000000000000..d5632a305dae --- /dev/null +++ b/arch/m68knommu/include/asm/atomic.h @@ -0,0 +1,155 @@ +#ifndef __ARCH_M68KNOMMU_ATOMIC__ +#define __ARCH_M68KNOMMU_ATOMIC__ + +#include + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + */ + +/* + * We do not have SMP m68k systems, so we don't have to deal with that. + */ + +typedef struct { int counter; } atomic_t; +#define ATOMIC_INIT(i) { (i) } + +#define atomic_read(v) ((v)->counter) +#define atomic_set(v, i) (((v)->counter) = i) + +static __inline__ void atomic_add(int i, atomic_t *v) +{ +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i)); +#else + __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i)); +#endif +} + +static __inline__ void atomic_sub(int i, atomic_t *v) +{ +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i)); +#else + __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i)); +#endif +} + +static __inline__ int atomic_sub_and_test(int i, atomic_t * v) +{ + char c; +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__("subl %2,%1; seq %0" + : "=d" (c), "+m" (*v) + : "d" (i)); +#else + __asm__ __volatile__("subl %2,%1; seq %0" + : "=d" (c), "+m" (*v) + : "di" (i)); +#endif + return c != 0; +} + +static __inline__ void atomic_inc(volatile atomic_t *v) +{ + __asm__ __volatile__("addql #1,%0" : "+m" (*v)); +} + +/* + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ + +static __inline__ int atomic_inc_and_test(volatile atomic_t *v) +{ + char c; + __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v)); + return c != 0; +} + +static __inline__ void atomic_dec(volatile atomic_t *v) +{ + __asm__ __volatile__("subql #1,%0" : "+m" (*v)); +} + +static __inline__ int atomic_dec_and_test(volatile atomic_t *v) +{ + char c; + __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v)); + return c != 0; +} + +static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v) +{ + __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask))); +} + +static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v) +{ + __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask)); +} + +/* Atomic operations are already serializing */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +static inline int atomic_add_return(int i, atomic_t * v) +{ + unsigned long temp, flags; + + local_irq_save(flags); + temp = *(long *)v; + temp += i; + *(long *)v = temp; + local_irq_restore(flags); + + return temp; +} + +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) + +static inline int atomic_sub_return(int i, atomic_t * v) +{ + unsigned long temp, flags; + + local_irq_save(flags); + temp = *(long *)v; + temp -= i; + *(long *)v = temp; + local_irq_restore(flags); + + return temp; +} + +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + c = atomic_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +#define atomic_dec_return(v) atomic_sub_return(1,(v)) +#define atomic_inc_return(v) atomic_add_return(1,(v)) + +#include +#endif /* __ARCH_M68KNOMMU_ATOMIC __ */ diff --git a/arch/m68knommu/include/asm/auxvec.h b/arch/m68knommu/include/asm/auxvec.h new file mode 100644 index 000000000000..844d6d52204b --- /dev/null +++ b/arch/m68knommu/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __ASMm68k_AUXVEC_H +#define __ASMm68k_AUXVEC_H + +#endif diff --git a/arch/m68knommu/include/asm/bitops.h b/arch/m68knommu/include/asm/bitops.h new file mode 100644 index 000000000000..6f3685eab44c --- /dev/null +++ b/arch/m68knommu/include/asm/bitops.h @@ -0,0 +1,336 @@ +#ifndef _M68KNOMMU_BITOPS_H +#define _M68KNOMMU_BITOPS_H + +/* + * Copyright 1992, Linus Torvalds. + */ + +#include +#include /* swab32 */ + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#if defined (__mcfisaaplus__) || defined (__mcfisac__) +static inline int ffs(unsigned int val) +{ + if (!val) + return 0; + + asm volatile( + "bitrev %0\n\t" + "ff1 %0\n\t" + : "=d" (val) + : "0" (val) + ); + val++; + return val; +} + +static inline int __ffs(unsigned int val) +{ + asm volatile( + "bitrev %0\n\t" + "ff1 %0\n\t" + : "=d" (val) + : "0" (val) + ); + return val; +} + +#else +#include +#include +#endif + +#include +#include + +static __inline__ void set_bit(int nr, volatile unsigned long * addr) +{ +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)" + : "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "d" (nr) + : "%a0", "cc"); +#else + __asm__ __volatile__ ("bset %1,%0" + : "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "di" (nr) + : "cc"); +#endif +} + +#define __set_bit(nr, addr) set_bit(nr, addr) + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +static __inline__ void clear_bit(int nr, volatile unsigned long * addr) +{ +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)" + : "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "d" (nr) + : "%a0", "cc"); +#else + __asm__ __volatile__ ("bclr %1,%0" + : "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "di" (nr) + : "cc"); +#endif +} + +#define __clear_bit(nr, addr) clear_bit(nr, addr) + +static __inline__ void change_bit(int nr, volatile unsigned long * addr) +{ +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)" + : "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "d" (nr) + : "%a0", "cc"); +#else + __asm__ __volatile__ ("bchg %1,%0" + : "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "di" (nr) + : "cc"); +#endif +} + +#define __change_bit(nr, addr) change_bit(nr, addr) + +static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr) +{ + char retval; + +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "d" (nr) + : "%a0"); +#else + __asm__ __volatile__ ("bset %2,%1; sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "di" (nr) + /* No clobber */); +#endif + + return retval; +} + +#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr) + +static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr) +{ + char retval; + +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "d" (nr) + : "%a0"); +#else + __asm__ __volatile__ ("bclr %2,%1; sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "di" (nr) + /* No clobber */); +#endif + + return retval; +} + +#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr) + +static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr) +{ + char retval; + +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "d" (nr) + : "%a0"); +#else + __asm__ __volatile__ ("bchg %2,%1; sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "di" (nr) + /* No clobber */); +#endif + + return retval; +} + +#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr) + +/* + * This routine doesn't need to be atomic. + */ +static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr) +{ + return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0; +} + +static __inline__ int __test_bit(int nr, const volatile unsigned long * addr) +{ + int * a = (int *) addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + return ((mask & *a) != 0); +} + +#define test_bit(nr,addr) \ +(__builtin_constant_p(nr) ? \ + __constant_test_bit((nr),(addr)) : \ + __test_bit((nr),(addr))) + +#include +#include +#include + +static __inline__ int ext2_set_bit(int nr, volatile void * addr) +{ + char retval; + +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) + : "d" (nr) + : "%a0"); +#else + __asm__ __volatile__ ("bset %2,%1; sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) + : "di" (nr) + /* No clobber */); +#endif + + return retval; +} + +static __inline__ int ext2_clear_bit(int nr, volatile void * addr) +{ + char retval; + +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) + : "d" (nr) + : "%a0"); +#else + __asm__ __volatile__ ("bclr %2,%1; sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) + : "di" (nr) + /* No clobber */); +#endif + + return retval; +} + +#define ext2_set_bit_atomic(lock, nr, addr) \ + ({ \ + int ret; \ + spin_lock(lock); \ + ret = ext2_set_bit((nr), (addr)); \ + spin_unlock(lock); \ + ret; \ + }) + +#define ext2_clear_bit_atomic(lock, nr, addr) \ + ({ \ + int ret; \ + spin_lock(lock); \ + ret = ext2_clear_bit((nr), (addr)); \ + spin_unlock(lock); \ + ret; \ + }) + +static __inline__ int ext2_test_bit(int nr, const volatile void * addr) +{ + char retval; + +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0" + : "=d" (retval) + : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr) + : "%a0"); +#else + __asm__ __volatile__ ("btst %2,%1; sne %0" + : "=d" (retval) + : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr) + /* No clobber */); +#endif + + return retval; +} + +#define ext2_find_first_zero_bit(addr, size) \ + ext2_find_next_zero_bit((addr), (size), 0) + +static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset) +{ + unsigned long *p = ((unsigned long *) addr) + (offset >> 5); + unsigned long result = offset & ~31UL; + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset &= 31UL; + if(offset) { + /* We hold the little endian value in tmp, but then the + * shift is illegal. So we could keep a big endian value + * in tmp, like this: + * + * tmp = __swab32(*(p++)); + * tmp |= ~0UL >> (32-offset); + * + * but this would decrease performance, so we change the + * shift: + */ + tmp = *(p++); + tmp |= __swab32(~0UL >> (32-offset)); + if(size < 32) + goto found_first; + if(~tmp) + goto found_middle; + size -= 32; + result += 32; + } + while(size & ~31UL) { + if(~(tmp = *(p++))) + goto found_middle; + result += 32; + size -= 32; + } + if(!size) + return result; + tmp = *p; + +found_first: + /* tmp is little endian, so we would have to swab the shift, + * see above. But then we have to swab tmp below for ffz, so + * we might as well do this here. + */ + return result + ffz(__swab32(tmp) | (~0UL << size)); +found_middle: + return result + ffz(__swab32(tmp)); +} + +#define ext2_find_next_bit(addr, size, off) \ + generic_find_next_le_bit((unsigned long *)(addr), (size), (off)) +#include + +#endif /* __KERNEL__ */ + +#include +#include + +#endif /* _M68KNOMMU_BITOPS_H */ diff --git a/arch/m68knommu/include/asm/bootinfo.h b/arch/m68knommu/include/asm/bootinfo.h new file mode 100644 index 000000000000..c12e526f5189 --- /dev/null +++ b/arch/m68knommu/include/asm/bootinfo.h @@ -0,0 +1,2 @@ + +/* Nothing for m68knommu */ diff --git a/arch/m68knommu/include/asm/bootstd.h b/arch/m68knommu/include/asm/bootstd.h new file mode 100644 index 000000000000..bdc1a4ac4fe9 --- /dev/null +++ b/arch/m68knommu/include/asm/bootstd.h @@ -0,0 +1,132 @@ +/* bootstd.h: Bootloader system call interface + * + * (c) 1999, Rt-Control, Inc. + */ + +#ifndef __BOOTSTD_H__ +#define __BOOTSTD_H__ + +#define NR_BSC 21 /* last used bootloader system call */ + +#define __BN_reset 0 /* reset and start the bootloader */ +#define __BN_test 1 /* tests the system call interface */ +#define __BN_exec 2 /* executes a bootloader image */ +#define __BN_exit 3 /* terminates a bootloader image */ +#define __BN_program 4 /* program FLASH from a chain */ +#define __BN_erase 5 /* erase sector(s) of FLASH */ +#define __BN_open 6 +#define __BN_write 7 +#define __BN_read 8 +#define __BN_close 9 +#define __BN_mmap 10 /* map a file descriptor into memory */ +#define __BN_munmap 11 /* remove a file to memory mapping */ +#define __BN_gethwaddr 12 /* get the hardware address of my interfaces */ +#define __BN_getserialnum 13 /* get the serial number of this board */ +#define __BN_getbenv 14 /* get a bootloader envvar */ +#define __BN_setbenv 15 /* get a bootloader envvar */ +#define __BN_setpmask 16 /* set the protection mask */ +#define __BN_readenv 17 /* read environment variables */ +#define __BN_flash_chattr_range 18 +#define __BN_flash_erase_range 19 +#define __BN_flash_write_range 20 + +/* Calling conventions compatible to (uC)linux/68k + * We use simmilar macros to call into the bootloader as for uClinux + */ + +#define __bsc_return(type, res) \ +do { \ + if ((unsigned long)(res) >= (unsigned long)(-64)) { \ + /* let errno be a function, preserve res in %d0 */ \ + int __err = -(res); \ + errno = __err; \ + res = -1; \ + } \ + return (type)(res); \ +} while (0) + +#define _bsc0(type,name) \ +type name(void) \ +{ \ + register long __res __asm__ ("%d0") = __BN_##name; \ + __asm__ __volatile__ ("trap #2" \ + : "=g" (__res) \ + : "0" (__res) \ + ); \ + __bsc_return(type,__res); \ +} + +#define _bsc1(type,name,atype,a) \ +type name(atype a) \ +{ \ + register long __res __asm__ ("%d0") = __BN_##name; \ + register long __a __asm__ ("%d1") = (long)a; \ + __asm__ __volatile__ ("trap #2" \ + : "=g" (__res) \ + : "0" (__res), "d" (__a) \ + ); \ + __bsc_return(type,__res); \ +} + +#define _bsc2(type,name,atype,a,btype,b) \ +type name(atype a, btype b) \ +{ \ + register long __res __asm__ ("%d0") = __BN_##name; \ + register long __a __asm__ ("%d1") = (long)a; \ + register long __b __asm__ ("%d2") = (long)b; \ + __asm__ __volatile__ ("trap #2" \ + : "=g" (__res) \ + : "0" (__res), "d" (__a), "d" (__b) \ + ); \ + __bsc_return(type,__res); \ +} + +#define _bsc3(type,name,atype,a,btype,b,ctype,c) \ +type name(atype a, btype b, ctype c) \ +{ \ + register long __res __asm__ ("%d0") = __BN_##name; \ + register long __a __asm__ ("%d1") = (long)a; \ + register long __b __asm__ ("%d2") = (long)b; \ + register long __c __asm__ ("%d3") = (long)c; \ + __asm__ __volatile__ ("trap #2" \ + : "=g" (__res) \ + : "0" (__res), "d" (__a), "d" (__b), \ + "d" (__c) \ + ); \ + __bsc_return(type,__res); \ +} + +#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \ +type name(atype a, btype b, ctype c, dtype d) \ +{ \ + register long __res __asm__ ("%d0") = __BN_##name; \ + register long __a __asm__ ("%d1") = (long)a; \ + register long __b __asm__ ("%d2") = (long)b; \ + register long __c __asm__ ("%d3") = (long)c; \ + register long __d __asm__ ("%d4") = (long)d; \ + __asm__ __volatile__ ("trap #2" \ + : "=g" (__res) \ + : "0" (__res), "d" (__a), "d" (__b), \ + "d" (__c), "d" (__d) \ + ); \ + __bsc_return(type,__res); \ +} + +#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \ +type name(atype a, btype b, ctype c, dtype d, etype e) \ +{ \ + register long __res __asm__ ("%d0") = __BN_##name; \ + register long __a __asm__ ("%d1") = (long)a; \ + register long __b __asm__ ("%d2") = (long)b; \ + register long __c __asm__ ("%d3") = (long)c; \ + register long __d __asm__ ("%d4") = (long)d; \ + register long __e __asm__ ("%d5") = (long)e; \ + __asm__ __volatile__ ("trap #2" \ + : "=g" (__res) \ + : "0" (__res), "d" (__a), "d" (__b), \ + "d" (__c), "d" (__d), "d" (__e) \ + ); \ + __bsc_return(type,__res); \ +} + +#endif /* __BOOTSTD_H__ */ diff --git a/arch/m68knommu/include/asm/bug.h b/arch/m68knommu/include/asm/bug.h new file mode 100644 index 000000000000..70e7dc0af21a --- /dev/null +++ b/arch/m68knommu/include/asm/bug.h @@ -0,0 +1,4 @@ +#ifndef _M68KNOMMU_BUG_H +#define _M68KNOMMU_BUG_H +#include +#endif diff --git a/arch/m68knommu/include/asm/bugs.h b/arch/m68knommu/include/asm/bugs.h new file mode 100644 index 000000000000..5f382dac3a60 --- /dev/null +++ b/arch/m68knommu/include/asm/bugs.h @@ -0,0 +1,16 @@ +/* + * include/asm-m68k/bugs.h + * + * Copyright (C) 1994 Linus Torvalds + */ + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ + +static void check_bugs(void) +{ +} diff --git a/arch/m68knommu/include/asm/byteorder.h b/arch/m68knommu/include/asm/byteorder.h new file mode 100644 index 000000000000..20bb4426b610 --- /dev/null +++ b/arch/m68knommu/include/asm/byteorder.h @@ -0,0 +1,27 @@ +#ifndef _M68KNOMMU_BYTEORDER_H +#define _M68KNOMMU_BYTEORDER_H + +#include + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#if defined (__mcfisaaplus__) || defined (__mcfisac__) +static inline __attribute_const__ __u32 ___arch__swab32(__u32 val) +{ + asm( + "byterev %0" + : "=d" (val) + : "0" (val) + ); + return val; +} + +#define __arch__swab32(x) ___arch__swab32(x) +#endif + +#include + +#endif /* _M68KNOMMU_BYTEORDER_H */ diff --git a/arch/m68knommu/include/asm/cache.h b/arch/m68knommu/include/asm/cache.h new file mode 100644 index 000000000000..24e9eace5f8c --- /dev/null +++ b/arch/m68knommu/include/asm/cache.h @@ -0,0 +1,12 @@ +#ifndef __ARCH_M68KNOMMU_CACHE_H +#define __ARCH_M68KNOMMU_CACHE_H + +/* bytes per L1 cache line */ +#define L1_CACHE_BYTES 16 /* this need to be at least 1 */ + +/* m68k-elf-gcc 2.95.2 doesn't like these */ + +#define __cacheline_aligned +#define ____cacheline_aligned + +#endif diff --git a/arch/m68knommu/include/asm/cachectl.h b/arch/m68knommu/include/asm/cachectl.h new file mode 100644 index 000000000000..bcf5a6a9dd52 --- /dev/null +++ b/arch/m68knommu/include/asm/cachectl.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/cacheflush.h b/arch/m68knommu/include/asm/cacheflush.h new file mode 100644 index 000000000000..87e5dc0413b4 --- /dev/null +++ b/arch/m68knommu/include/asm/cacheflush.h @@ -0,0 +1,84 @@ +#ifndef _M68KNOMMU_CACHEFLUSH_H +#define _M68KNOMMU_CACHEFLUSH_H + +/* + * (C) Copyright 2000-2004, Greg Ungerer + */ +#include + +#define flush_cache_all() __flush_cache_all() +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) __flush_cache_all() +#define flush_cache_page(vma, vmaddr) do { } while (0) +#define flush_dcache_range(start,len) __flush_cache_all() +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_range(start,len) __flush_cache_all() +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +static inline void __flush_cache_all(void) +{ +#ifdef CONFIG_M5407 + /* + * Use cpushl to push and invalidate all cache lines. + * Gas doesn't seem to know how to generate the ColdFire + * cpushl instruction... Oh well, bit stuff it for now. + */ + __asm__ __volatile__ ( + "nop\n\t" + "clrl %%d0\n\t" + "1:\n\t" + "movel %%d0,%%a0\n\t" + "2:\n\t" + ".word 0xf468\n\t" + "addl #0x10,%%a0\n\t" + "cmpl #0x00000800,%%a0\n\t" + "blt 2b\n\t" + "addql #1,%%d0\n\t" + "cmpil #4,%%d0\n\t" + "bne 1b\n\t" + "movel #0xb6088500,%%d0\n\t" + "movec %%d0,%%CACR\n\t" + : : : "d0", "a0" ); +#endif /* CONFIG_M5407 */ +#if defined(CONFIG_M527x) || defined(CONFIG_M528x) + __asm__ __volatile__ ( + "movel #0x81000200, %%d0\n\t" + "movec %%d0, %%CACR\n\t" + "nop\n\t" + : : : "d0" ); +#endif /* CONFIG_M527x || CONFIG_M528x */ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272) + __asm__ __volatile__ ( + "movel #0x81000100, %%d0\n\t" + "movec %%d0, %%CACR\n\t" + "nop\n\t" + : : : "d0" ); +#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */ +#ifdef CONFIG_M5249 + __asm__ __volatile__ ( + "movel #0xa1000200, %%d0\n\t" + "movec %%d0, %%CACR\n\t" + "nop\n\t" + : : : "d0" ); +#endif /* CONFIG_M5249 */ +#ifdef CONFIG_M532x + __asm__ __volatile__ ( + "movel #0x81000200, %%d0\n\t" + "movec %%d0, %%CACR\n\t" + "nop\n\t" + : : : "d0" ); +#endif /* CONFIG_M532x */ +} + +#endif /* _M68KNOMMU_CACHEFLUSH_H */ diff --git a/arch/m68knommu/include/asm/checksum.h b/arch/m68knommu/include/asm/checksum.h new file mode 100644 index 000000000000..81883482ffb1 --- /dev/null +++ b/arch/m68knommu/include/asm/checksum.h @@ -0,0 +1,132 @@ +#ifndef _M68K_CHECKSUM_H +#define _M68K_CHECKSUM_H + +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +__wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum); + + +/* + * the same as csum_partial_copy, but copies from user space. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +extern __wsum csum_partial_copy_from_user(const void __user *src, + void *dst, int len, __wsum sum, int *csum_err); + +__sum16 ip_fast_csum(const void *iph, unsigned int ihl); + +/* + * Fold a partial checksum + */ + +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int tmp = (__force u32)sum; +#ifdef CONFIG_COLDFIRE + tmp = (tmp & 0xffff) + (tmp >> 16); + tmp = (tmp & 0xffff) + (tmp >> 16); + return (__force __sum16)~tmp; +#else + __asm__("swap %1\n\t" + "addw %1, %0\n\t" + "clrw %1\n\t" + "addxw %1, %0" + : "=&d" (sum), "=&d" (tmp) + : "0" (sum), "1" (sum)); + return (__force __sum16)~sum; +#endif +} + + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ + +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + __asm__ ("addl %1,%0\n\t" + "addxl %4,%0\n\t" + "addxl %5,%0\n\t" + "clrl %1\n\t" + "addxl %1,%0" + : "=&d" (sum), "=&d" (saddr) + : "0" (daddr), "1" (saddr), "d" (len + proto), + "d"(sum)); + return sum; +} + +static inline __sum16 +csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +extern __sum16 ip_compute_csum(const void *buff, int len); + +#define _HAVE_ARCH_IPV6_CSUM +static __inline__ __sum16 +csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, + __u32 len, unsigned short proto, __wsum sum) +{ + register unsigned long tmp; + __asm__("addl %2@,%0\n\t" + "movel %2@(4),%1\n\t" + "addxl %1,%0\n\t" + "movel %2@(8),%1\n\t" + "addxl %1,%0\n\t" + "movel %2@(12),%1\n\t" + "addxl %1,%0\n\t" + "movel %3@,%1\n\t" + "addxl %1,%0\n\t" + "movel %3@(4),%1\n\t" + "addxl %1,%0\n\t" + "movel %3@(8),%1\n\t" + "addxl %1,%0\n\t" + "movel %3@(12),%1\n\t" + "addxl %1,%0\n\t" + "addxl %4,%0\n\t" + "clrl %1\n\t" + "addxl %1,%0" + : "=&d" (sum), "=&d" (tmp) + : "a" (saddr), "a" (daddr), "d" (len + proto), + "0" (sum)); + + return csum_fold(sum); +} + +#endif /* _M68K_CHECKSUM_H */ diff --git a/arch/m68knommu/include/asm/coldfire.h b/arch/m68knommu/include/asm/coldfire.h new file mode 100644 index 000000000000..83a9fa4e618a --- /dev/null +++ b/arch/m68knommu/include/asm/coldfire.h @@ -0,0 +1,51 @@ +/****************************************************************************/ + +/* + * coldfire.h -- Motorola ColdFire CPU sepecific defines + * + * (C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef coldfire_h +#define coldfire_h +/****************************************************************************/ + + +/* + * Define master clock frequency. This is essentially done at config + * time now. No point enumerating dozens of possible clock options + * here. Also the peripheral clock (bus clock) divide ratio is set + * at config time too. + */ +#ifdef CONFIG_CLOCK_SET +#define MCF_CLK CONFIG_CLOCK_FREQ +#define MCF_BUSCLK (CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV) +#else +#error "Don't know what your ColdFire CPU clock frequency is??" +#endif + +/* + * Define the processor support peripherals base address. + * This is generally setup by the boards start up code. + */ +#define MCF_MBAR 0x10000000 +#define MCF_MBAR2 0x80000000 +#if defined(CONFIG_M520x) +#define MCF_IPSBAR 0xFC000000 +#else +#define MCF_IPSBAR 0x40000000 +#endif + +#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ + defined(CONFIG_M520x) +#undef MCF_MBAR +#define MCF_MBAR MCF_IPSBAR +#elif defined(CONFIG_M532x) +#undef MCF_MBAR +#define MCF_MBAR 0x00000000 +#endif + +/****************************************************************************/ +#endif /* coldfire_h */ diff --git a/arch/m68knommu/include/asm/commproc.h b/arch/m68knommu/include/asm/commproc.h new file mode 100644 index 000000000000..edf5eb6c08d2 --- /dev/null +++ b/arch/m68knommu/include/asm/commproc.h @@ -0,0 +1,703 @@ + +/* + * 68360 Communication Processor Module. + * Copyright (c) 2000 Michael Leslie (mc68360) after: + * Copyright (c) 1997 Dan Malek (mpc8xx) + * + * This file contains structures and information for the communication + * processor channels. Some CPM control and status is available + * through the 68360 internal memory map. See include/asm/360_immap.h for details. + * This file is not a complete map of all of the 360 QUICC's capabilities + * + * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 + * bytes of the DP RAM and relocates the I2C parameter area to the + * IDMA1 space. The remaining DP RAM is available for buffer descriptors + * or other use. + */ +#ifndef __CPM_360__ +#define __CPM_360__ + + +/* CPM Command register masks: */ +#define CPM_CR_RST ((ushort)0x8000) +#define CPM_CR_OPCODE ((ushort)0x0f00) +#define CPM_CR_CHAN ((ushort)0x00f0) +#define CPM_CR_FLG ((ushort)0x0001) + +/* CPM Command set (opcodes): */ +#define CPM_CR_INIT_TRX ((ushort)0x0000) +#define CPM_CR_INIT_RX ((ushort)0x0001) +#define CPM_CR_INIT_TX ((ushort)0x0002) +#define CPM_CR_HUNT_MODE ((ushort)0x0003) +#define CPM_CR_STOP_TX ((ushort)0x0004) +#define CPM_CR_GRSTOP_TX ((ushort)0x0005) +#define CPM_CR_RESTART_TX ((ushort)0x0006) +#define CPM_CR_CLOSE_RXBD ((ushort)0x0007) +#define CPM_CR_SET_GADDR ((ushort)0x0008) +#define CPM_CR_GCI_TIMEOUT ((ushort)0x0009) +#define CPM_CR_GCI_ABORT ((ushort)0x000a) +#define CPM_CR_RESET_BCS ((ushort)0x000a) + +/* CPM Channel numbers. */ +#define CPM_CR_CH_SCC1 ((ushort)0x0000) +#define CPM_CR_CH_SCC2 ((ushort)0x0004) +#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / Timers */ +#define CPM_CR_CH_TMR ((ushort)0x0005) +#define CPM_CR_CH_SCC3 ((ushort)0x0008) +#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / IDMA1 */ +#define CPM_CR_CH_IDMA1 ((ushort)0x0009) +#define CPM_CR_CH_SCC4 ((ushort)0x000c) +#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / IDMA2 */ +#define CPM_CR_CH_IDMA2 ((ushort)0x000d) + + +#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) + +#if 1 /* mleslie: I dinna think we have any such restrictions on + * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */ + +/* The dual ported RAM is multi-functional. Some areas can be (and are + * being) used for microcode. There is an area that can only be used + * as data ram for buffer descriptors, which is all we use right now. + * Currently the first 512 and last 256 bytes are used for microcode. + */ +/* mleslie: The uCquicc board is using no extra microcode in DPRAM */ +#define CPM_DATAONLY_BASE ((uint)0x0000) +#define CPM_DATAONLY_SIZE ((uint)0x0800) +#define CPM_DP_NOSPACE ((uint)0x7fffffff) + +#endif + + +/* Export the base address of the communication processor registers + * and dual port ram. */ +/* extern cpm360_t *cpmp; */ /* Pointer to comm processor */ +extern QUICC *pquicc; +uint m360_cpm_dpalloc(uint size); +/* void *m360_cpm_hostalloc(uint size); */ +void m360_cpm_setbrg(uint brg, uint rate); + +#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h */ +/* Buffer descriptors used by many of the CPM protocols. */ +typedef struct cpm_buf_desc { + ushort cbd_sc; /* Status and Control */ + ushort cbd_datlen; /* Data length in buffer */ + uint cbd_bufaddr; /* Buffer address in host memory */ +} cbd_t; +#endif + + +/* rx bd status/control bits */ +#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ +#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */ +#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ +#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */ + +#define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */ +#define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */ + +#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ +#define BD_SC_ID ((ushort)0x0100) /* Received too many idles */ + +#define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */ +#define BD_SC_DE ((ushort)0x0080) /* DPLL Error (HDLC) */ + +#define BD_SC_BR ((ushort)0x0020) /* Break received */ +#define BD_SC_LG ((ushort)0x0020) /* Frame length violation (HDLC) */ + +#define BD_SC_FR ((ushort)0x0010) /* Framing error */ +#define BD_SC_NO ((ushort)0x0010) /* Nonoctet aligned frame (HDLC) */ + +#define BD_SC_PR ((ushort)0x0008) /* Parity error */ +#define BD_SC_AB ((ushort)0x0008) /* Received abort Sequence (HDLC) */ + +#define BD_SC_OV ((ushort)0x0002) /* Overrun */ +#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */ + +/* tx bd status/control bits (as differ from rx bd) */ +#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ +#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */ +#define BD_SC_P ((ushort)0x0100) /* xmt preamble */ +#define BD_SC_UN ((ushort)0x0002) /* Underrun */ + + + + +/* Parameter RAM offsets. */ + + + +/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM. + * In 2.0, we use a more structured C struct map of DPRAM, and so + * instead, we need only a parameter ram `slot' */ + +#define PRSLOT_SCC1 0 +#define PRSLOT_SCC2 1 +#define PRSLOT_SCC3 2 +#define PRSLOT_SMC1 2 +#define PRSLOT_SCC4 3 +#define PRSLOT_SMC2 3 + + +/* #define PROFF_SCC1 ((uint)0x0000) */ +/* #define PROFF_SCC2 ((uint)0x0100) */ +/* #define PROFF_SCC3 ((uint)0x0200) */ +/* #define PROFF_SMC1 ((uint)0x0280) */ +/* #define PROFF_SCC4 ((uint)0x0300) */ +/* #define PROFF_SMC2 ((uint)0x0380) */ + + +/* Define enough so I can at least use the serial port as a UART. + * The MBX uses SMC1 as the host serial port. + */ +typedef struct smc_uart { + ushort smc_rbase; /* Rx Buffer descriptor base address */ + ushort smc_tbase; /* Tx Buffer descriptor base address */ + u_char smc_rfcr; /* Rx function code */ + u_char smc_tfcr; /* Tx function code */ + ushort smc_mrblr; /* Max receive buffer length */ + uint smc_rstate; /* Internal */ + uint smc_idp; /* Internal */ + ushort smc_rbptr; /* Internal */ + ushort smc_ibc; /* Internal */ + uint smc_rxtmp; /* Internal */ + uint smc_tstate; /* Internal */ + uint smc_tdp; /* Internal */ + ushort smc_tbptr; /* Internal */ + ushort smc_tbc; /* Internal */ + uint smc_txtmp; /* Internal */ + ushort smc_maxidl; /* Maximum idle characters */ + ushort smc_tmpidl; /* Temporary idle counter */ + ushort smc_brklen; /* Last received break length */ + ushort smc_brkec; /* rcv'd break condition counter */ + ushort smc_brkcr; /* xmt break count register */ + ushort smc_rmask; /* Temporary bit mask */ +} smc_uart_t; + +/* Function code bits. +*/ +#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ + +/* SMC uart mode register. +*/ +#define SMCMR_REN ((ushort)0x0001) +#define SMCMR_TEN ((ushort)0x0002) +#define SMCMR_DM ((ushort)0x000c) +#define SMCMR_SM_GCI ((ushort)0x0000) +#define SMCMR_SM_UART ((ushort)0x0020) +#define SMCMR_SM_TRANS ((ushort)0x0030) +#define SMCMR_SM_MASK ((ushort)0x0030) +#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ +#define SMCMR_REVD SMCMR_PM_EVEN +#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ +#define SMCMR_BS SMCMR_PEN +#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ +#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ +#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) + +/* SMC2 as Centronics parallel printer. It is half duplex, in that + * it can only receive or transmit. The parameter ram values for + * each direction are either unique or properly overlap, so we can + * include them in one structure. + */ +typedef struct smc_centronics { + ushort scent_rbase; + ushort scent_tbase; + u_char scent_cfcr; + u_char scent_smask; + ushort scent_mrblr; + uint scent_rstate; + uint scent_r_ptr; + ushort scent_rbptr; + ushort scent_r_cnt; + uint scent_rtemp; + uint scent_tstate; + uint scent_t_ptr; + ushort scent_tbptr; + ushort scent_t_cnt; + uint scent_ttemp; + ushort scent_max_sl; + ushort scent_sl_cnt; + ushort scent_character1; + ushort scent_character2; + ushort scent_character3; + ushort scent_character4; + ushort scent_character5; + ushort scent_character6; + ushort scent_character7; + ushort scent_character8; + ushort scent_rccm; + ushort scent_rccr; +} smc_cent_t; + +/* Centronics Status Mask Register. +*/ +#define SMC_CENT_F ((u_char)0x08) +#define SMC_CENT_PE ((u_char)0x04) +#define SMC_CENT_S ((u_char)0x02) + +/* SMC Event and Mask register. +*/ +#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ +#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ +#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ +#define SMCM_BSY ((unsigned char)0x04) +#define SMCM_TX ((unsigned char)0x02) +#define SMCM_RX ((unsigned char)0x01) + +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +/* SCCs. +*/ +#define SCC_GSMRH_IRP ((uint)0x00040000) +#define SCC_GSMRH_GDE ((uint)0x00010000) +#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) +#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) +#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) +#define SCC_GSMRH_REVD ((uint)0x00002000) +#define SCC_GSMRH_TRX ((uint)0x00001000) +#define SCC_GSMRH_TTX ((uint)0x00000800) +#define SCC_GSMRH_CDP ((uint)0x00000400) +#define SCC_GSMRH_CTSP ((uint)0x00000200) +#define SCC_GSMRH_CDS ((uint)0x00000100) +#define SCC_GSMRH_CTSS ((uint)0x00000080) +#define SCC_GSMRH_TFL ((uint)0x00000040) +#define SCC_GSMRH_RFW ((uint)0x00000020) +#define SCC_GSMRH_TXSY ((uint)0x00000010) +#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) +#define SCC_GSMRH_SYNL8 ((uint)0x00000008) +#define SCC_GSMRH_SYNL4 ((uint)0x00000004) +#define SCC_GSMRH_RTSM ((uint)0x00000002) +#define SCC_GSMRH_RSYN ((uint)0x00000001) + +#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ +#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) +#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) +#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) +#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) +#define SCC_GSMRL_TCI ((uint)0x10000000) +#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) +#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) +#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) +#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) +#define SCC_GSMRL_RINV ((uint)0x02000000) +#define SCC_GSMRL_TINV ((uint)0x01000000) +#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) +#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) +#define SCC_GSMRL_TPL_48 ((uint)0x00800000) +#define SCC_GSMRL_TPL_32 ((uint)0x00600000) +#define SCC_GSMRL_TPL_16 ((uint)0x00400000) +#define SCC_GSMRL_TPL_8 ((uint)0x00200000) +#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) +#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) +#define SCC_GSMRL_TPP_01 ((uint)0x00100000) +#define SCC_GSMRL_TPP_10 ((uint)0x00080000) +#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) +#define SCC_GSMRL_TEND ((uint)0x00040000) +#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) +#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) +#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) +#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) +#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) +#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) +#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) +#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) +#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) +#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) +#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) +#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) +#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) +#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) +#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ +#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) +#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) +#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) +#define SCC_GSMRL_ENR ((uint)0x00000020) +#define SCC_GSMRL_ENT ((uint)0x00000010) +#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) +#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) +#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) +#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) +#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) +#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) +#define SCC_GSMRL_MODE_UART ((uint)0x00000004) +#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) +#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) +#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) + +#define SCC_TODR_TOD ((ushort)0x8000) + +/* SCC Event and Mask register. +*/ +#define SCCM_TXE ((unsigned char)0x10) +#define SCCM_BSY ((unsigned char)0x04) +#define SCCM_TX ((unsigned char)0x02) +#define SCCM_RX ((unsigned char)0x01) + +typedef struct scc_param { + ushort scc_rbase; /* Rx Buffer descriptor base address */ + ushort scc_tbase; /* Tx Buffer descriptor base address */ + u_char scc_rfcr; /* Rx function code */ + u_char scc_tfcr; /* Tx function code */ + ushort scc_mrblr; /* Max receive buffer length */ + uint scc_rstate; /* Internal */ + uint scc_idp; /* Internal */ + ushort scc_rbptr; /* Internal */ + ushort scc_ibc; /* Internal */ + uint scc_rxtmp; /* Internal */ + uint scc_tstate; /* Internal */ + uint scc_tdp; /* Internal */ + ushort scc_tbptr; /* Internal */ + ushort scc_tbc; /* Internal */ + uint scc_txtmp; /* Internal */ + uint scc_rcrc; /* Internal */ + uint scc_tcrc; /* Internal */ +} sccp_t; + + +/* Function code bits. + */ +#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ +#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */ + +/* CPM Ethernet through SCC1. + */ +typedef struct scc_enet { + sccp_t sen_genscc; + uint sen_cpres; /* Preset CRC */ + uint sen_cmask; /* Constant mask for CRC */ + uint sen_crcec; /* CRC Error counter */ + uint sen_alec; /* alignment error counter */ + uint sen_disfc; /* discard frame counter */ + ushort sen_pads; /* Tx short frame pad character */ + ushort sen_retlim; /* Retry limit threshold */ + ushort sen_retcnt; /* Retry limit counter */ + ushort sen_maxflr; /* maximum frame length register */ + ushort sen_minflr; /* minimum frame length register */ + ushort sen_maxd1; /* maximum DMA1 length */ + ushort sen_maxd2; /* maximum DMA2 length */ + ushort sen_maxd; /* Rx max DMA */ + ushort sen_dmacnt; /* Rx DMA counter */ + ushort sen_maxb; /* Max BD byte count */ + ushort sen_gaddr1; /* Group address filter */ + ushort sen_gaddr2; + ushort sen_gaddr3; + ushort sen_gaddr4; + uint sen_tbuf0data0; /* Save area 0 - current frame */ + uint sen_tbuf0data1; /* Save area 1 - current frame */ + uint sen_tbuf0rba; /* Internal */ + uint sen_tbuf0crc; /* Internal */ + ushort sen_tbuf0bcnt; /* Internal */ + ushort sen_paddrh; /* physical address (MSB) */ + ushort sen_paddrm; + ushort sen_paddrl; /* physical address (LSB) */ + ushort sen_pper; /* persistence */ + ushort sen_rfbdptr; /* Rx first BD pointer */ + ushort sen_tfbdptr; /* Tx first BD pointer */ + ushort sen_tlbdptr; /* Tx last BD pointer */ + uint sen_tbuf1data0; /* Save area 0 - current frame */ + uint sen_tbuf1data1; /* Save area 1 - current frame */ + uint sen_tbuf1rba; /* Internal */ + uint sen_tbuf1crc; /* Internal */ + ushort sen_tbuf1bcnt; /* Internal */ + ushort sen_txlen; /* Tx Frame length counter */ + ushort sen_iaddr1; /* Individual address filter */ + ushort sen_iaddr2; + ushort sen_iaddr3; + ushort sen_iaddr4; + ushort sen_boffcnt; /* Backoff counter */ + + /* NOTE: Some versions of the manual have the following items + * incorrectly documented. Below is the proper order. + */ + ushort sen_taddrh; /* temp address (MSB) */ + ushort sen_taddrm; + ushort sen_taddrl; /* temp address (LSB) */ +} scc_enet_t; + + + +#if defined (CONFIG_UCQUICC) +/* uCquicc has the following signals connected to Ethernet: + * 68360 - lxt905 + * PA0/RXD1 - rxd + * PA1/TXD1 - txd + * PA8/CLK1 - tclk + * PA9/CLK2 - rclk + * PC0/!RTS1 - t_en + * PC1/!CTS1 - col + * PC5/!CD1 - cd + */ +#define PA_ENET_RXD PA_RXD1 +#define PA_ENET_TXD PA_TXD1 +#define PA_ENET_TCLK PA_CLK1 +#define PA_ENET_RCLK PA_CLK2 +#define PC_ENET_TENA PC_RTS1 +#define PC_ENET_CLSN PC_CTS1 +#define PC_ENET_RENA PC_CD1 + +/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to + * SCC1. + */ +#define SICR_ENET_MASK ((uint)0x000000ff) +#define SICR_ENET_CLKRT ((uint)0x0000002c) + +#endif /* config_ucquicc */ + + +#ifdef MBX +/* Bits in parallel I/O port registers that have to be set/cleared + * to configure the pins for SCC1 use. The TCLK and RCLK seem unique + * to the MBX860 board. Any two of the four available clocks could be + * used, and the MPC860 cookbook manual has an example using different + * clock pins. + */ +#define PA_ENET_RXD ((ushort)0x0001) +#define PA_ENET_TXD ((ushort)0x0002) +#define PA_ENET_TCLK ((ushort)0x0200) +#define PA_ENET_RCLK ((ushort)0x0800) +#define PC_ENET_TENA ((ushort)0x0001) +#define PC_ENET_CLSN ((ushort)0x0010) +#define PC_ENET_RENA ((ushort)0x0020) + +/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to + * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. + */ +#define SICR_ENET_MASK ((uint)0x000000ff) +#define SICR_ENET_CLKRT ((uint)0x0000003d) +#endif + +#ifdef CONFIG_RPXLITE +/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of + * this may be unique to the RPX-Lite configuration. + * Note TENA is on Port B. + */ +#define PA_ENET_RXD ((ushort)0x0004) +#define PA_ENET_TXD ((ushort)0x0008) +#define PA_ENET_TCLK ((ushort)0x0200) +#define PA_ENET_RCLK ((ushort)0x0800) +#define PB_ENET_TENA ((uint)0x00002000) +#define PC_ENET_CLSN ((ushort)0x0040) +#define PC_ENET_RENA ((ushort)0x0080) + +#define SICR_ENET_MASK ((uint)0x0000ff00) +#define SICR_ENET_CLKRT ((uint)0x00003d00) +#endif + +#ifdef CONFIG_BSEIP +/* This ENET stuff is for the MPC823 with ethernet on SCC2. + * This is unique to the BSE ip-Engine board. + */ +#define PA_ENET_RXD ((ushort)0x0004) +#define PA_ENET_TXD ((ushort)0x0008) +#define PA_ENET_TCLK ((ushort)0x0100) +#define PA_ENET_RCLK ((ushort)0x0200) +#define PB_ENET_TENA ((uint)0x00002000) +#define PC_ENET_CLSN ((ushort)0x0040) +#define PC_ENET_RENA ((ushort)0x0080) + +/* BSE uses port B and C bits for PHY control also. +*/ +#define PB_BSE_POWERUP ((uint)0x00000004) +#define PB_BSE_FDXDIS ((uint)0x00008000) +#define PC_BSE_LOOPBACK ((ushort)0x0800) + +#define SICR_ENET_MASK ((uint)0x0000ff00) +#define SICR_ENET_CLKRT ((uint)0x00002c00) +#endif + +/* SCC Event register as used by Ethernet. +*/ +#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ +#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* SCC Mode Register (PMSR) as used by Ethernet. +*/ +#define SCC_PMSR_HBC ((ushort)0x8000) /* Enable heartbeat */ +#define SCC_PMSR_FC ((ushort)0x4000) /* Force collision */ +#define SCC_PMSR_RSH ((ushort)0x2000) /* Receive short frames */ +#define SCC_PMSR_IAM ((ushort)0x1000) /* Check individual hash */ +#define SCC_PMSR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ +#define SCC_PMSR_PRO ((ushort)0x0200) /* Promiscuous mode */ +#define SCC_PMSR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ +#define SCC_PMSR_SBT ((ushort)0x0080) /* Special backoff timer */ +#define SCC_PMSR_LPB ((ushort)0x0040) /* Set Loopback mode */ +#define SCC_PMSR_SIP ((ushort)0x0020) /* Sample Input Pins */ +#define SCC_PMSR_LCW ((ushort)0x0010) /* Late collision window */ +#define SCC_PMSR_NIB22 ((ushort)0x000a) /* Start frame search */ +#define SCC_PMSR_FDE ((ushort)0x0001) /* Full duplex enable */ + +/* Buffer descriptor control/status used by Ethernet receive. +*/ +#define BD_ENET_RX_EMPTY ((ushort)0x8000) +#define BD_ENET_RX_WRAP ((ushort)0x2000) +#define BD_ENET_RX_INTR ((ushort)0x1000) +#define BD_ENET_RX_LAST ((ushort)0x0800) +#define BD_ENET_RX_FIRST ((ushort)0x0400) +#define BD_ENET_RX_MISS ((ushort)0x0100) +#define BD_ENET_RX_LG ((ushort)0x0020) +#define BD_ENET_RX_NO ((ushort)0x0010) +#define BD_ENET_RX_SH ((ushort)0x0008) +#define BD_ENET_RX_CR ((ushort)0x0004) +#define BD_ENET_RX_OV ((ushort)0x0002) +#define BD_ENET_RX_CL ((ushort)0x0001) +#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ + +/* Buffer descriptor control/status used by Ethernet transmit. +*/ +#define BD_ENET_TX_READY ((ushort)0x8000) +#define BD_ENET_TX_PAD ((ushort)0x4000) +#define BD_ENET_TX_WRAP ((ushort)0x2000) +#define BD_ENET_TX_INTR ((ushort)0x1000) +#define BD_ENET_TX_LAST ((ushort)0x0800) +#define BD_ENET_TX_TC ((ushort)0x0400) +#define BD_ENET_TX_DEF ((ushort)0x0200) +#define BD_ENET_TX_HB ((ushort)0x0100) +#define BD_ENET_TX_LC ((ushort)0x0080) +#define BD_ENET_TX_RL ((ushort)0x0040) +#define BD_ENET_TX_RCMASK ((ushort)0x003c) +#define BD_ENET_TX_UN ((ushort)0x0002) +#define BD_ENET_TX_CSL ((ushort)0x0001) +#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ + +/* SCC as UART +*/ +typedef struct scc_uart { + sccp_t scc_genscc; + uint scc_res1; /* Reserved */ + uint scc_res2; /* Reserved */ + ushort scc_maxidl; /* Maximum idle chars */ + ushort scc_idlc; /* temp idle counter */ + ushort scc_brkcr; /* Break count register */ + ushort scc_parec; /* receive parity error counter */ + ushort scc_frmec; /* receive framing error counter */ + ushort scc_nosec; /* receive noise counter */ + ushort scc_brkec; /* receive break condition counter */ + ushort scc_brkln; /* last received break length */ + ushort scc_uaddr1; /* UART address character 1 */ + ushort scc_uaddr2; /* UART address character 2 */ + ushort scc_rtemp; /* Temp storage */ + ushort scc_toseq; /* Transmit out of sequence char */ + ushort scc_char1; /* control character 1 */ + ushort scc_char2; /* control character 2 */ + ushort scc_char3; /* control character 3 */ + ushort scc_char4; /* control character 4 */ + ushort scc_char5; /* control character 5 */ + ushort scc_char6; /* control character 6 */ + ushort scc_char7; /* control character 7 */ + ushort scc_char8; /* control character 8 */ + ushort scc_rccm; /* receive control character mask */ + ushort scc_rccr; /* receive control character register */ + ushort scc_rlbc; /* receive last break character */ +} scc_uart_t; + +/* SCC Event and Mask registers when it is used as a UART. +*/ +#define UART_SCCM_GLR ((ushort)0x1000) +#define UART_SCCM_GLT ((ushort)0x0800) +#define UART_SCCM_AB ((ushort)0x0200) +#define UART_SCCM_IDL ((ushort)0x0100) +#define UART_SCCM_GRA ((ushort)0x0080) +#define UART_SCCM_BRKE ((ushort)0x0040) +#define UART_SCCM_BRKS ((ushort)0x0020) +#define UART_SCCM_CCR ((ushort)0x0008) +#define UART_SCCM_BSY ((ushort)0x0004) +#define UART_SCCM_TX ((ushort)0x0002) +#define UART_SCCM_RX ((ushort)0x0001) + +/* The SCC PMSR when used as a UART. +*/ +#define SCU_PMSR_FLC ((ushort)0x8000) +#define SCU_PMSR_SL ((ushort)0x4000) +#define SCU_PMSR_CL ((ushort)0x3000) +#define SCU_PMSR_UM ((ushort)0x0c00) +#define SCU_PMSR_FRZ ((ushort)0x0200) +#define SCU_PMSR_RZS ((ushort)0x0100) +#define SCU_PMSR_SYN ((ushort)0x0080) +#define SCU_PMSR_DRT ((ushort)0x0040) +#define SCU_PMSR_PEN ((ushort)0x0010) +#define SCU_PMSR_RPM ((ushort)0x000c) +#define SCU_PMSR_REVP ((ushort)0x0008) +#define SCU_PMSR_TPM ((ushort)0x0003) +#define SCU_PMSR_TEVP ((ushort)0x0003) + +/* CPM Transparent mode SCC. + */ +typedef struct scc_trans { + sccp_t st_genscc; + uint st_cpres; /* Preset CRC */ + uint st_cmask; /* Constant mask for CRC */ +} scc_trans_t; + +#define BD_SCC_TX_LAST ((ushort)0x0800) + + + +/* CPM interrupts. There are nearly 32 interrupts generated by CPM + * channels or devices. All of these are presented to the PPC core + * as a single interrupt. The CPM interrupt handler dispatches its + * own handlers, in a similar fashion to the PPC core handler. We + * use the table as defined in the manuals (i.e. no special high + * priority and SCC1 == SCCa, etc...). + */ +/* #define CPMVEC_NR 32 */ +/* #define CPMVEC_PIO_PC15 ((ushort)0x1f) */ +/* #define CPMVEC_SCC1 ((ushort)0x1e) */ +/* #define CPMVEC_SCC2 ((ushort)0x1d) */ +/* #define CPMVEC_SCC3 ((ushort)0x1c) */ +/* #define CPMVEC_SCC4 ((ushort)0x1b) */ +/* #define CPMVEC_PIO_PC14 ((ushort)0x1a) */ +/* #define CPMVEC_TIMER1 ((ushort)0x19) */ +/* #define CPMVEC_PIO_PC13 ((ushort)0x18) */ +/* #define CPMVEC_PIO_PC12 ((ushort)0x17) */ +/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */ +/* #define CPMVEC_IDMA1 ((ushort)0x15) */ +/* #define CPMVEC_IDMA2 ((ushort)0x14) */ +/* #define CPMVEC_TIMER2 ((ushort)0x12) */ +/* #define CPMVEC_RISCTIMER ((ushort)0x11) */ +/* #define CPMVEC_I2C ((ushort)0x10) */ +/* #define CPMVEC_PIO_PC11 ((ushort)0x0f) */ +/* #define CPMVEC_PIO_PC10 ((ushort)0x0e) */ +/* #define CPMVEC_TIMER3 ((ushort)0x0c) */ +/* #define CPMVEC_PIO_PC9 ((ushort)0x0b) */ +/* #define CPMVEC_PIO_PC8 ((ushort)0x0a) */ +/* #define CPMVEC_PIO_PC7 ((ushort)0x09) */ +/* #define CPMVEC_TIMER4 ((ushort)0x07) */ +/* #define CPMVEC_PIO_PC6 ((ushort)0x06) */ +/* #define CPMVEC_SPI ((ushort)0x05) */ +/* #define CPMVEC_SMC1 ((ushort)0x04) */ +/* #define CPMVEC_SMC2 ((ushort)0x03) */ +/* #define CPMVEC_PIO_PC5 ((ushort)0x02) */ +/* #define CPMVEC_PIO_PC4 ((ushort)0x01) */ +/* #define CPMVEC_ERROR ((ushort)0x00) */ + +extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id); + +/* CPM interrupt configuration vector. +*/ +#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ +#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ +#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ +#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ +#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ +#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ +#define CICR_IEN ((uint)0x00000080) /* Int. enable */ +#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ +#endif /* __CPM_360__ */ diff --git a/arch/m68knommu/include/asm/cputime.h b/arch/m68knommu/include/asm/cputime.h new file mode 100644 index 000000000000..a0c4a660878d --- /dev/null +++ b/arch/m68knommu/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __M68KNOMMU_CPUTIME_H +#define __M68KNOMMU_CPUTIME_H + +#include + +#endif /* __M68KNOMMU_CPUTIME_H */ diff --git a/arch/m68knommu/include/asm/current.h b/arch/m68knommu/include/asm/current.h new file mode 100644 index 000000000000..53ee0f9f7cef --- /dev/null +++ b/arch/m68knommu/include/asm/current.h @@ -0,0 +1,24 @@ +#ifndef _M68KNOMMU_CURRENT_H +#define _M68KNOMMU_CURRENT_H +/* + * current.h + * (C) Copyright 2000, Lineo, David McCullough + * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) + * + * rather than dedicate a register (as the m68k source does), we + * just keep a global, we should probably just change it all to be + * current and lose _current_task. + */ + +#include + +struct task_struct; + +static inline struct task_struct *get_current(void) +{ + return(current_thread_info()->task); +} + +#define current get_current() + +#endif /* _M68KNOMMU_CURRENT_H */ diff --git a/arch/m68knommu/include/asm/dbg.h b/arch/m68knommu/include/asm/dbg.h new file mode 100644 index 000000000000..27af3270f671 --- /dev/null +++ b/arch/m68knommu/include/asm/dbg.h @@ -0,0 +1,6 @@ +#define DEBUG 1 +#ifdef CONFIG_COLDFIRE +#define BREAK asm volatile ("halt") +#else +#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0 +#endif diff --git a/arch/m68knommu/include/asm/delay.h b/arch/m68knommu/include/asm/delay.h new file mode 100644 index 000000000000..55cbd6294ab6 --- /dev/null +++ b/arch/m68knommu/include/asm/delay.h @@ -0,0 +1,76 @@ +#ifndef _M68KNOMMU_DELAY_H +#define _M68KNOMMU_DELAY_H + +/* + * Copyright (C) 1994 Hamish Macdonald + * Copyright (C) 2004 Greg Ungerer + */ + +#include + +static inline void __delay(unsigned long loops) +{ +#if defined(CONFIG_COLDFIRE) + /* The coldfire runs this loop at significantly different speeds + * depending upon long word alignment or not. We'll pad it to + * long word alignment which is the faster version. + * The 0x4a8e is of course a 'tstl %fp' instruction. This is better + * than using a NOP (0x4e71) instruction because it executes in one + * cycle not three and doesn't allow for an arbitary delay waiting + * for bus cycles to finish. Also fp/a6 isn't likely to cause a + * stall waiting for the register to become valid if such is added + * to the coldfire at some stage. + */ + __asm__ __volatile__ ( ".balignw 4, 0x4a8e\n\t" + "1: subql #1, %0\n\t" + "jcc 1b" + : "=d" (loops) : "0" (loops)); +#else + __asm__ __volatile__ ( "1: subql #1, %0\n\t" + "jcc 1b" + : "=d" (loops) : "0" (loops)); +#endif +} + +/* + * Ideally we use a 32*32->64 multiply to calculate the number of + * loop iterations, but the older standard 68k and ColdFire do not + * have this instruction. So for them we have a clsoe approximation + * loop using 32*32->32 multiplies only. This calculation based on + * the ARM version of delay. + * + * We want to implement: + * + * loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32 + */ + +#define HZSCALE (268435456 / (1000000/HZ)) + +extern unsigned long loops_per_jiffy; + +static inline void _udelay(unsigned long usecs) +{ +#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \ + defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \ + defined(CONFIG_COLDFIRE) + __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6); +#else + unsigned long tmp; + + usecs *= 4295; /* 2**32 / 1000000 */ + __asm__ ("mulul %2,%0:%1" + : "=d" (usecs), "=d" (tmp) + : "d" (usecs), "1" (loops_per_jiffy*HZ)); + __delay(usecs); +#endif +} + +/* + * Moved the udelay() function into library code, no longer inlined. + * I had to change the algorithm because we are overflowing now on + * the faster ColdFire parts. The code is a little bigger, so it makes + * sense to library it. + */ +extern void udelay(unsigned long usecs); + +#endif /* defined(_M68KNOMMU_DELAY_H) */ diff --git a/arch/m68knommu/include/asm/device.h b/arch/m68knommu/include/asm/device.h new file mode 100644 index 000000000000..d8f9872b0e2d --- /dev/null +++ b/arch/m68knommu/include/asm/device.h @@ -0,0 +1,7 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include + diff --git a/arch/m68knommu/include/asm/div64.h b/arch/m68knommu/include/asm/div64.h new file mode 100644 index 000000000000..6cd978cefb28 --- /dev/null +++ b/arch/m68knommu/include/asm/div64.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/dma-mapping.h b/arch/m68knommu/include/asm/dma-mapping.h new file mode 100644 index 000000000000..6aeab18e58bd --- /dev/null +++ b/arch/m68knommu/include/asm/dma-mapping.h @@ -0,0 +1,10 @@ +#ifndef _M68KNOMMU_DMA_MAPPING_H +#define _M68KNOMMU_DMA_MAPPING_H + +#ifdef CONFIG_PCI +#include +#else +#include +#endif + +#endif /* _M68KNOMMU_DMA_MAPPING_H */ diff --git a/arch/m68knommu/include/asm/dma.h b/arch/m68knommu/include/asm/dma.h new file mode 100644 index 000000000000..939a02056217 --- /dev/null +++ b/arch/m68knommu/include/asm/dma.h @@ -0,0 +1,494 @@ +#ifndef _M68K_DMA_H +#define _M68K_DMA_H 1 + +//#define DMA_DEBUG 1 + + +#ifdef CONFIG_COLDFIRE +/* + * ColdFire DMA Model: + * ColdFire DMA supports two forms of DMA: Single and Dual address. Single + * address mode emits a source address, and expects that the device will either + * pick up the data (DMA READ) or source data (DMA WRITE). This implies that + * the device will place data on the correct byte(s) of the data bus, as the + * memory transactions are always 32 bits. This implies that only 32 bit + * devices will find single mode transfers useful. Dual address DMA mode + * performs two cycles: source read and destination write. ColdFire will + * align the data so that the device will always get the correct bytes, thus + * is useful for 8 and 16 bit devices. This is the mode that is supported + * below. + * + * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 + * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) + * + * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000 + * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) + * + * APR/18/2002 : added proper support for MCF5272 DMA controller. + * Arthur Shipkowski (art@videon-central.com) + */ + +#include +#include +#include + +/* + * Set number of channels of DMA on ColdFire for different implementations. + */ +#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \ + defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) +#define MAX_M68K_DMA_CHANNELS 4 +#elif defined(CONFIG_M5272) +#define MAX_M68K_DMA_CHANNELS 1 +#elif defined(CONFIG_M532x) +#define MAX_M68K_DMA_CHANNELS 0 +#else +#define MAX_M68K_DMA_CHANNELS 2 +#endif + +extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; +extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; + +#if !defined(CONFIG_M5272) +#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */ +#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */ +#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */ +#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */ + +/* I/O to memory, 8 bits, mode */ +#define DMA_MODE_READ 0 +/* memory to I/O, 8 bits, mode */ +#define DMA_MODE_WRITE 1 +/* I/O to memory, 16 bits, mode */ +#define DMA_MODE_READ_WORD 2 +/* memory to I/O, 16 bits, mode */ +#define DMA_MODE_WRITE_WORD 3 +/* I/O to memory, 32 bits, mode */ +#define DMA_MODE_READ_LONG 4 +/* memory to I/O, 32 bits, mode */ +#define DMA_MODE_WRITE_LONG 5 +/* I/O to memory, 8 bits, single-address-mode */ +#define DMA_MODE_READ_SINGLE 8 +/* memory to I/O, 8 bits, single-address-mode */ +#define DMA_MODE_WRITE_SINGLE 9 +/* I/O to memory, 16 bits, single-address-mode */ +#define DMA_MODE_READ_WORD_SINGLE 10 +/* memory to I/O, 16 bits, single-address-mode */ +#define DMA_MODE_WRITE_WORD_SINGLE 11 +/* I/O to memory, 32 bits, single-address-mode */ +#define DMA_MODE_READ_LONG_SINGLE 12 +/* memory to I/O, 32 bits, single-address-mode */ +#define DMA_MODE_WRITE_LONG_SINGLE 13 + +#else /* CONFIG_M5272 is defined */ + +/* Source static-address mode */ +#define DMA_MODE_SRC_SA_BIT 0x01 +/* Two bits to select between all four modes */ +#define DMA_MODE_SSIZE_MASK 0x06 +/* Offset to shift bits in */ +#define DMA_MODE_SSIZE_OFF 0x01 +/* Destination static-address mode */ +#define DMA_MODE_DES_SA_BIT 0x10 +/* Two bits to select between all four modes */ +#define DMA_MODE_DSIZE_MASK 0x60 +/* Offset to shift bits in */ +#define DMA_MODE_DSIZE_OFF 0x05 +/* Size modifiers */ +#define DMA_MODE_SIZE_LONG 0x00 +#define DMA_MODE_SIZE_BYTE 0x01 +#define DMA_MODE_SIZE_WORD 0x02 +#define DMA_MODE_SIZE_LINE 0x03 + +/* + * Aliases to help speed quick ports; these may be suboptimal, however. They + * do not include the SINGLE mode modifiers since the MCF5272 does not have a + * mode where the device is in control of its addressing. + */ + +/* I/O to memory, 8 bits, mode */ +#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) +/* memory to I/O, 8 bits, mode */ +#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) +/* I/O to memory, 16 bits, mode */ +#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) +/* memory to I/O, 16 bits, mode */ +#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) +/* I/O to memory, 32 bits, mode */ +#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) +/* memory to I/O, 32 bits, mode */ +#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) + +#endif /* !defined(CONFIG_M5272) */ + +#if !defined(CONFIG_M5272) +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("enable_dma(dmanr=%d)\n", dmanr); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT; +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + volatile unsigned short *dmawp; + volatile unsigned char *dmapb; + +#ifdef DMA_DEBUG + printk("disable_dma(dmanr=%d)\n", dmanr); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmapb = (unsigned char *) dma_base_addr[dmanr]; + + /* Turn off external requests, and stop any DMA in progress */ + dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT; + dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE; +} + +/* + * Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while interrupts are disabled! --- + * + * This is a NOP for ColdFire. Provide a stub for compatibility. + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + + volatile unsigned char *dmabp; + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); +#endif + + dmabp = (unsigned char *) dma_base_addr[dmanr]; + dmawp = (unsigned short *) dma_base_addr[dmanr]; + + // Clear config errors + dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; + + // Set command register + dmawp[MCFDMA_DCR] = + MCFDMA_DCR_INT | // Enable completion irq + MCFDMA_DCR_CS | // Force one xfer per request + MCFDMA_DCR_AA | // Enable auto alignment + // single-address-mode + ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) | + // sets s_rw (-> r/w) high if Memory to I/0 + ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) | + // Memory to I/O or I/O to Memory + ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) | + // 32 bit, 16 bit or 8 bit transfers + ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD : + ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG : + MCFDMA_DCR_SSIZE_BYTE)) | + ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD : + ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG : + MCFDMA_DCR_DSIZE_BYTE)); + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__, + dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR], + (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]); +#endif +} + +/* Set transfer address for specific DMA channel */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) +{ + volatile unsigned short *dmawp; + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmalp = (unsigned int *) dma_base_addr[dmanr]; + + // Determine which address registers are used for memory/device accesses + if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) { + // Source incrementing, must be memory + dmalp[MCFDMA_SAR] = a; + // Set dest address, must be device + dmalp[MCFDMA_DAR] = dma_device_address[dmanr]; + } else { + // Destination incrementing, must be memory + dmalp[MCFDMA_DAR] = a; + // Set source address, must be device + dmalp[MCFDMA_SAR] = dma_device_address[dmanr]; + } + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", + __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR], + (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR], + (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]); +#endif +} + +/* + * Specific for Coldfire - sets device address. + * Should be called after the mode set call, and before set DMA address. + */ +static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) +{ +#ifdef DMA_DEBUG + printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dma_device_address[dmanr] = a; +} + +/* + * NOTE 2: "count" represents _bytes_. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmawp[MCFDMA_BCR] = (unsigned short)count; +} + +/* + * Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * Otherwise, it returns the number of _bytes_ left to transfer. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + volatile unsigned short *dmawp; + unsigned short count; + +#ifdef DMA_DEBUG + printk("get_dma_residue(dmanr=%d)\n", dmanr); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + count = dmawp[MCFDMA_BCR]; + return((int) count); +} +#else /* CONFIG_M5272 is defined */ + +/* + * The MCF5272 DMA controller is very different than the controller defined above + * in terms of register mapping. For instance, with the exception of the 16-bit + * interrupt register (IRQ#85, for reference), all of the registers are 32-bit. + * + * The big difference, however, is the lack of device-requested DMA. All modes + * are dual address transfer, and there is no 'device' setup or direction bit. + * You can DMA between a device and memory, between memory and memory, or even between + * two devices directly, with any combination of incrementing and non-incrementing + * addresses you choose. This puts a crimp in distinguishing between the 'device + * address' set up by set_dma_device_addr. + * + * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr, + * which will act exactly as above in -- it will look to see if the source is set to + * autoincrement, and if so it will make the source use the set_dma_addr value and the + * destination the set_dma_device_addr value. Otherwise the source will be set to the + * set_dma_device_addr value and the destination will get the set_dma_addr value. + * + * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions + * and make it explicit. Depending on what you're doing, one of these two should work + * for you, but don't mix them in the same transfer setup. + */ + +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("enable_dma(dmanr=%d)\n", dmanr); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN; +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("disable_dma(dmanr=%d)\n", dmanr); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + + /* Turn off external requests, and stop any DMA in progress */ + dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN; + dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; +} + +/* + * Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while interrupts are disabled! --- + * + * This is a NOP for ColdFire. Provide a stub for compatibility. + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + + volatile unsigned int *dmalp; + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); +#endif + dmalp = (unsigned int *) dma_base_addr[dmanr]; + dmawp = (unsigned short *) dma_base_addr[dmanr]; + + // Clear config errors + dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; + + // Set command register + dmalp[MCFDMA_DMR] = + MCFDMA_DMR_RQM_DUAL | // Mandatory Request Mode setting + MCFDMA_DMR_DSTT_SD | // Set up addressing types; set to supervisor-data. + MCFDMA_DMR_SRCT_SD | // Set up addressing types; set to supervisor-data. + // source static-address-mode + ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) | + // dest static-address-mode + ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) | + // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 + (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) | + (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF); + + dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */ + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__, + dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR], + (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]); +#endif +} + +/* Set transfer address for specific DMA channel */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + + // Determine which address registers are used for memory/device accesses + if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) { + // Source incrementing, must be memory + dmalp[MCFDMA_DSAR] = a; + // Set dest address, must be device + dmalp[MCFDMA_DDAR] = dma_device_address[dmanr]; + } else { + // Destination incrementing, must be memory + dmalp[MCFDMA_DDAR] = a; + // Set source address, must be device + dmalp[MCFDMA_DSAR] = dma_device_address[dmanr]; + } + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", + __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR], + (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR], + (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]); +#endif +} + +/* + * Specific for Coldfire - sets device address. + * Should be called after the mode set call, and before set DMA address. + */ +static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) +{ +#ifdef DMA_DEBUG + printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dma_device_address[dmanr] = a; +} + +/* + * NOTE 2: "count" represents _bytes_. + * + * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + dmalp[MCFDMA_DBCR] = count; +} + +/* + * Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * Otherwise, it returns the number of _bytes_ left to transfer. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + volatile unsigned int *dmalp; + unsigned int count; + +#ifdef DMA_DEBUG + printk("get_dma_residue(dmanr=%d)\n", dmanr); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + count = dmalp[MCFDMA_DBCR]; + return(count); +} + +#endif /* !defined(CONFIG_M5272) */ +#endif /* CONFIG_COLDFIRE */ + +#define MAX_DMA_CHANNELS 8 + +/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any + occurrence should be flagged as an error. */ +/* under 2.4 it is actually needed by the new bootmem allocator */ +#define MAX_DMA_ADDRESS PAGE_OFFSET + +/* These are in kernel/dma.c: */ +extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */ +extern void free_dma(unsigned int dmanr); /* release it again */ + +#endif /* _M68K_DMA_H */ diff --git a/arch/m68knommu/include/asm/elf.h b/arch/m68knommu/include/asm/elf.h new file mode 100644 index 000000000000..27f0ec70fba8 --- /dev/null +++ b/arch/m68knommu/include/asm/elf.h @@ -0,0 +1,110 @@ +#ifndef __ASMm68k_ELF_H +#define __ASMm68k_ELF_H + +/* + * ELF register definitions.. + */ + +#include +#include + +/* + * 68k ELF relocation types + */ +#define R_68K_NONE 0 +#define R_68K_32 1 +#define R_68K_16 2 +#define R_68K_8 3 +#define R_68K_PC32 4 +#define R_68K_PC16 5 +#define R_68K_PC8 6 +#define R_68K_GOT32 7 +#define R_68K_GOT16 8 +#define R_68K_GOT8 9 +#define R_68K_GOT32O 10 +#define R_68K_GOT16O 11 +#define R_68K_GOT8O 12 +#define R_68K_PLT32 13 +#define R_68K_PLT16 14 +#define R_68K_PLT8 15 +#define R_68K_PLT32O 16 +#define R_68K_PLT16O 17 +#define R_68K_PLT8O 18 +#define R_68K_COPY 19 +#define R_68K_GLOB_DAT 20 +#define R_68K_JMP_SLOT 21 +#define R_68K_RELATIVE 22 + +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_m68kfp_struct elf_fpregset_t; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_68K) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2MSB +#define ELF_ARCH EM_68K + +/* For SVR4/m68k the function pointer to be registered with `atexit' is + passed in %a1. Although my copy of the ABI has no such statement, it + is actually used on ASV. */ +#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0 + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE 4096 + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE 0xD0000000UL + +#define ELF_CORE_COPY_REGS(pr_reg, regs) \ + /* Bleech. */ \ + pr_reg[0] = regs->d1; \ + pr_reg[1] = regs->d2; \ + pr_reg[2] = regs->d3; \ + pr_reg[3] = regs->d4; \ + pr_reg[4] = regs->d5; \ + pr_reg[7] = regs->a0; \ + pr_reg[8] = regs->a1; \ + pr_reg[14] = regs->d0; \ + pr_reg[15] = rdusp(); \ + pr_reg[16] = 0 /* regs->orig_d0 */; \ + pr_reg[17] = regs->sr; \ + pr_reg[18] = regs->pc; \ + /* pr_reg[19] = (regs->format << 12) | regs->vector; */ \ + { \ + struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \ + pr_reg[5] = sw->d6; \ + pr_reg[6] = sw->d7; \ + pr_reg[10] = sw->a3; \ + pr_reg[11] = sw->a4; \ + pr_reg[12] = sw->a5; \ + pr_reg[13] = sw->a6; \ + } + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. */ + +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (NULL) + +#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) + +#endif diff --git a/arch/m68knommu/include/asm/elia.h b/arch/m68knommu/include/asm/elia.h new file mode 100644 index 000000000000..e037d4e2de33 --- /dev/null +++ b/arch/m68knommu/include/asm/elia.h @@ -0,0 +1,41 @@ +/****************************************************************************/ + +/* + * elia.h -- Lineo (formerly Moreton Bay) eLIA platform support. + * + * (C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au) + * (C) Copyright 1999-2000, Lineo (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef elia_h +#define elia_h +/****************************************************************************/ + +#include + +#ifdef CONFIG_eLIA + +/* + * The serial port DTR and DCD lines are also on the Parallel I/O + * as well, so define those too. + */ + +#define eLIA_DCD1 0x0001 +#define eLIA_DCD0 0x0002 +#define eLIA_DTR1 0x0004 +#define eLIA_DTR0 0x0008 + +#define eLIA_PCIRESET 0x0020 + +/* + * Kernel macros to set and unset the LEDs. + */ +#ifndef __ASSEMBLY__ +extern unsigned short ppdata; +#endif /* __ASSEMBLY__ */ + +#endif /* CONFIG_eLIA */ + +/****************************************************************************/ +#endif /* elia_h */ diff --git a/arch/m68knommu/include/asm/emergency-restart.h b/arch/m68knommu/include/asm/emergency-restart.h new file mode 100644 index 000000000000..108d8c48e42e --- /dev/null +++ b/arch/m68knommu/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/m68knommu/include/asm/entry.h b/arch/m68knommu/include/asm/entry.h new file mode 100644 index 000000000000..c2553d26273d --- /dev/null +++ b/arch/m68knommu/include/asm/entry.h @@ -0,0 +1,182 @@ +#ifndef __M68KNOMMU_ENTRY_H +#define __M68KNOMMU_ENTRY_H + +#include +#include + +/* + * Stack layout in 'ret_from_exception': + * + * This allows access to the syscall arguments in registers d1-d5 + * + * 0(sp) - d1 + * 4(sp) - d2 + * 8(sp) - d3 + * C(sp) - d4 + * 10(sp) - d5 + * 14(sp) - a0 + * 18(sp) - a1 + * 1C(sp) - a2 + * 20(sp) - d0 + * 24(sp) - orig_d0 + * 28(sp) - stack adjustment + * 2C(sp) - [ sr ] [ format & vector ] + * 2E(sp) - [ pc-hiword ] [ sr ] + * 30(sp) - [ pc-loword ] [ pc-hiword ] + * 32(sp) - [ format & vector ] [ pc-loword ] + * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^ + * M68K COLDFIRE + */ + +#define ALLOWINT 0xf8ff + +#ifdef __ASSEMBLY__ + +/* process bits for task_struct.flags */ +PF_TRACESYS_OFF = 3 +PF_TRACESYS_BIT = 5 +PF_PTRACED_OFF = 3 +PF_PTRACED_BIT = 4 +PF_DTRACE_OFF = 1 +PF_DTRACE_BIT = 5 + +LENOSYS = 38 + +#define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */ + +/* + * This defines the normal kernel pt-regs layout. + * + * regs are a2-a6 and d6-d7 preserved by C code + * the kernel doesn't mess with usp unless it needs to + */ + +#ifdef CONFIG_COLDFIRE +/* + * This is made a little more tricky on the ColdFire. There is no + * separate kernel and user stack pointers. Need to artificially + * construct a usp in software... When doing this we need to disable + * interrupts, otherwise bad things could happen. + */ +.macro SAVE_ALL + move #0x2700,%sr /* disable intrs */ + btst #5,%sp@(2) /* from user? */ + bnes 6f /* no, skip */ + movel %sp,sw_usp /* save user sp */ + addql #8,sw_usp /* remove exception */ + movel sw_ksp,%sp /* kernel sp */ + subql #8,%sp /* room for exception */ + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ + movel sw_usp,%a0 /* get usp */ + movel %a0@-,%sp@(PT_PC) /* copy exception program counter */ + movel %a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */ + bra 7f + 6: + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ + 7: +.endm + +.macro RESTORE_ALL + btst #5,%sp@(PT_SR) /* going user? */ + bnes 8f /* no, skip */ + move #0x2700,%sr /* disable intrs */ + movel sw_usp,%a0 /* get usp */ + movel %sp@(PT_PC),%a0@- /* copy exception program counter */ + movel %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */ + moveml %sp@,%d1-%d5/%a0-%a2 + lea %sp@(32),%sp /* space for 8 regs */ + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stkadj */ + addql #8,%sp /* remove exception */ + movel %sp,sw_ksp /* save ksp */ + subql #8,sw_usp /* set exception */ + movel sw_usp,%sp /* restore usp */ + rte + 8: + moveml %sp@,%d1-%d5/%a0-%a2 + lea %sp@(32),%sp /* space for 8 regs */ + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stkadj */ + rte +.endm + +/* + * Quick exception save, use current stack only. + */ +.macro SAVE_LOCAL + move #0x2700,%sr /* disable intrs */ + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ +.endm + +.macro RESTORE_LOCAL + moveml %sp@,%d1-%d5/%a0-%a2 + lea %sp@(32),%sp /* space for 8 regs */ + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stkadj */ + rte +.endm + +.macro SAVE_SWITCH_STACK + lea %sp@(-24),%sp /* 6 regs */ + moveml %a3-%a6/%d6-%d7,%sp@ +.endm + +.macro RESTORE_SWITCH_STACK + moveml %sp@,%a3-%a6/%d6-%d7 + lea %sp@(24),%sp /* 6 regs */ +.endm + +/* + * Software copy of the user and kernel stack pointers... Ugh... + * Need these to get around ColdFire not having separate kernel + * and user stack pointers. + */ +.globl sw_usp +.globl sw_ksp + +#else /* !CONFIG_COLDFIRE */ + +/* + * Standard 68k interrupt entry and exit macros. + */ +.macro SAVE_ALL + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + moveml %d1-%d5/%a0-%a2,%sp@- +.endm + +.macro RESTORE_ALL + moveml %sp@+,%a0-%a2/%d1-%d5 + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stkadj */ + rte +.endm + +.macro SAVE_SWITCH_STACK + moveml %a3-%a6/%d6-%d7,%sp@- +.endm + +.macro RESTORE_SWITCH_STACK + moveml %sp@+,%a3-%a6/%d6-%d7 +.endm + +#endif /* !CONFIG_COLDFIRE */ +#endif /* __ASSEMBLY__ */ +#endif /* __M68KNOMMU_ENTRY_H */ diff --git a/arch/m68knommu/include/asm/errno.h b/arch/m68knommu/include/asm/errno.h new file mode 100644 index 000000000000..7e8c22b9a5e6 --- /dev/null +++ b/arch/m68knommu/include/asm/errno.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/fb.h b/arch/m68knommu/include/asm/fb.h new file mode 100644 index 000000000000..c7df38030992 --- /dev/null +++ b/arch/m68knommu/include/asm/fb.h @@ -0,0 +1,12 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ +#include + +#define fb_pgprotect(...) do {} while (0) + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/m68knommu/include/asm/fcntl.h b/arch/m68knommu/include/asm/fcntl.h new file mode 100644 index 000000000000..f6a552cda4cd --- /dev/null +++ b/arch/m68knommu/include/asm/fcntl.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/flat.h b/arch/m68knommu/include/asm/flat.h new file mode 100644 index 000000000000..814b5174a8e0 --- /dev/null +++ b/arch/m68knommu/include/asm/flat.h @@ -0,0 +1,17 @@ +/* + * include/asm-m68knommu/flat.h -- uClinux flat-format executables + */ + +#ifndef __M68KNOMMU_FLAT_H__ +#define __M68KNOMMU_FLAT_H__ + +#define flat_stack_align(sp) /* nothing needed */ +#define flat_argvp_envp_on_stack() 1 +#define flat_old_ram_flag(flags) (flags) +#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) +#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp) +#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) +#define flat_get_relocate_addr(rel) (rel) +#define flat_set_persistent(relval, p) 0 + +#endif /* __M68KNOMMU_FLAT_H__ */ diff --git a/arch/m68knommu/include/asm/fpu.h b/arch/m68knommu/include/asm/fpu.h new file mode 100644 index 000000000000..b16b2e4fca2a --- /dev/null +++ b/arch/m68knommu/include/asm/fpu.h @@ -0,0 +1,21 @@ +#ifndef __M68KNOMMU_FPU_H +#define __M68KNOMMU_FPU_H + + +/* + * MAX floating point unit state size (FSAVE/FRESTORE) + */ +#if defined(CONFIG_M68020) || defined(CONFIG_M68030) +#define FPSTATESIZE (216/sizeof(unsigned char)) +#elif defined(CONFIG_M68040) +#define FPSTATESIZE (96/sizeof(unsigned char)) +#elif defined(CONFIG_M68KFPU_EMU) +#define FPSTATESIZE (28/sizeof(unsigned char)) +#elif defined(CONFIG_M68060) +#define FPSTATESIZE (12/sizeof(unsigned char)) +#else +/* Assume no FP unit present then... */ +#define FPSTATESIZE (2) /* dummy size */ +#endif + +#endif /* __M68K_FPU_H */ diff --git a/arch/m68knommu/include/asm/futex.h b/arch/m68knommu/include/asm/futex.h new file mode 100644 index 000000000000..6a332a9f099c --- /dev/null +++ b/arch/m68knommu/include/asm/futex.h @@ -0,0 +1,6 @@ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#include + +#endif diff --git a/arch/m68knommu/include/asm/hardirq.h b/arch/m68knommu/include/asm/hardirq.h new file mode 100644 index 000000000000..bfad28149a49 --- /dev/null +++ b/arch/m68knommu/include/asm/hardirq.h @@ -0,0 +1,27 @@ +#ifndef __M68K_HARDIRQ_H +#define __M68K_HARDIRQ_H + +#include +#include +#include + +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +#define HARDIRQ_BITS 8 + +/* + * The hardirq mask has to be large enough to have + * space for potentially all IRQ sources in the system + * nesting on a single CPU: + */ +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +void ack_bad_irq(unsigned int irq); + +#endif /* __M68K_HARDIRQ_H */ diff --git a/arch/m68knommu/include/asm/hw_irq.h b/arch/m68knommu/include/asm/hw_irq.h new file mode 100644 index 000000000000..f3ec9e5ae049 --- /dev/null +++ b/arch/m68knommu/include/asm/hw_irq.h @@ -0,0 +1,4 @@ +#ifndef __M68KNOMMU_HW_IRQ_H__ +#define __M68KNOMMU_HW_IRQ_H__ + +#endif /* __M68KNOMMU_HW_IRQ_H__ */ diff --git a/arch/m68knommu/include/asm/hwtest.h b/arch/m68knommu/include/asm/hwtest.h new file mode 100644 index 000000000000..700626a1b1bf --- /dev/null +++ b/arch/m68knommu/include/asm/hwtest.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/io.h b/arch/m68knommu/include/asm/io.h new file mode 100644 index 000000000000..6adef1ee2082 --- /dev/null +++ b/arch/m68knommu/include/asm/io.h @@ -0,0 +1,194 @@ +#ifndef _M68KNOMMU_IO_H +#define _M68KNOMMU_IO_H + +#ifdef __KERNEL__ + + +/* + * These are for ISA/PCI shared memory _only_ and should never be used + * on any other type of memory, including Zorro memory. They are meant to + * access the bus in the bus byte order which is little-endian!. + * + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the m68k architecture, we just read/write the + * memory location directly. + */ +/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates + * two accesses to memory, which may be undesireable for some devices. + */ + +/* + * swap functions are sometimes needed to interface little-endian hardware + */ +static inline unsigned short _swapw(volatile unsigned short v) +{ + return ((v << 8) | (v >> 8)); +} + +static inline unsigned int _swapl(volatile unsigned long v) +{ + return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24)); +} + +#define readb(addr) \ + ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; }) +#define readw(addr) \ + ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; }) +#define readl(addr) \ + ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; }) + +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) + +#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) +#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) +#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) + +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel + +static inline void io_outsb(unsigned int addr, void *buf, int len) +{ + volatile unsigned char *ap = (volatile unsigned char *) addr; + unsigned char *bp = (unsigned char *) buf; + while (len--) + *ap = *bp++; +} + +static inline void io_outsw(unsigned int addr, void *buf, int len) +{ + volatile unsigned short *ap = (volatile unsigned short *) addr; + unsigned short *bp = (unsigned short *) buf; + while (len--) + *ap = _swapw(*bp++); +} + +static inline void io_outsl(unsigned int addr, void *buf, int len) +{ + volatile unsigned int *ap = (volatile unsigned int *) addr; + unsigned int *bp = (unsigned int *) buf; + while (len--) + *ap = _swapl(*bp++); +} + +static inline void io_insb(unsigned int addr, void *buf, int len) +{ + volatile unsigned char *ap = (volatile unsigned char *) addr; + unsigned char *bp = (unsigned char *) buf; + while (len--) + *bp++ = *ap; +} + +static inline void io_insw(unsigned int addr, void *buf, int len) +{ + volatile unsigned short *ap = (volatile unsigned short *) addr; + unsigned short *bp = (unsigned short *) buf; + while (len--) + *bp++ = _swapw(*ap); +} + +static inline void io_insl(unsigned int addr, void *buf, int len) +{ + volatile unsigned int *ap = (volatile unsigned int *) addr; + unsigned int *bp = (unsigned int *) buf; + while (len--) + *bp++ = _swapl(*ap); +} + +#define mmiowb() + +/* + * make the short names macros so specific devices + * can override them as required + */ + +#define memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) + +#define inb(addr) readb(addr) +#define inw(addr) readw(addr) +#define inl(addr) readl(addr) +#define outb(x,addr) ((void) writeb(x,addr)) +#define outw(x,addr) ((void) writew(x,addr)) +#define outl(x,addr) ((void) writel(x,addr)) + +#define inb_p(addr) inb(addr) +#define inw_p(addr) inw(addr) +#define inl_p(addr) inl(addr) +#define outb_p(x,addr) outb(x,addr) +#define outw_p(x,addr) outw(x,addr) +#define outl_p(x,addr) outl(x,addr) + +#define outsb(a,b,l) io_outsb(a,b,l) +#define outsw(a,b,l) io_outsw(a,b,l) +#define outsl(a,b,l) io_outsl(a,b,l) + +#define insb(a,b,l) io_insb(a,b,l) +#define insw(a,b,l) io_insw(a,b,l) +#define insl(a,b,l) io_insl(a,b,l) + +#define IO_SPACE_LIMIT 0xffff + + +/* Values for nocacheflag and cmode */ +#define IOMAP_FULL_CACHING 0 +#define IOMAP_NOCACHE_SER 1 +#define IOMAP_NOCACHE_NONSER 2 +#define IOMAP_WRITETHROUGH 3 + +extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); +extern void __iounmap(void *addr, unsigned long size); + +static inline void *ioremap(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); +} +static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_FULL_CACHING); +} + +extern void iounmap(void *addr); + +/* Pages to physical address... */ +#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) +#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) + +/* + * Macros used for converting between virtual and physical mappings. + */ +#define phys_to_virt(vaddr) ((void *) (vaddr)) +#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* _M68KNOMMU_IO_H */ diff --git a/arch/m68knommu/include/asm/ioctl.h b/arch/m68knommu/include/asm/ioctl.h new file mode 100644 index 000000000000..b279fe06dfe5 --- /dev/null +++ b/arch/m68knommu/include/asm/ioctl.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/ioctls.h b/arch/m68knommu/include/asm/ioctls.h new file mode 100644 index 000000000000..0b1eb4d85059 --- /dev/null +++ b/arch/m68knommu/include/asm/ioctls.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/ipcbuf.h b/arch/m68knommu/include/asm/ipcbuf.h new file mode 100644 index 000000000000..e4a7be6dd706 --- /dev/null +++ b/arch/m68knommu/include/asm/ipcbuf.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/irq.h b/arch/m68knommu/include/asm/irq.h new file mode 100644 index 000000000000..9373c31ac87d --- /dev/null +++ b/arch/m68knommu/include/asm/irq.h @@ -0,0 +1,26 @@ +#ifndef _M68KNOMMU_IRQ_H_ +#define _M68KNOMMU_IRQ_H_ + +#ifdef CONFIG_COLDFIRE +/* + * On the ColdFire we keep track of all vectors. That way drivers + * can register whatever vector number they wish, and we can deal + * with it. + */ +#define SYS_IRQS 256 +#define NR_IRQS SYS_IRQS + +#else + +/* + * # of m68k interrupts + */ +#define SYS_IRQS 8 +#define NR_IRQS (24 + SYS_IRQS) + +#endif /* CONFIG_COLDFIRE */ + + +#define irq_canonicalize(irq) (irq) + +#endif /* _M68KNOMMU_IRQ_H_ */ diff --git a/arch/m68knommu/include/asm/irq_regs.h b/arch/m68knommu/include/asm/irq_regs.h new file mode 100644 index 000000000000..3dd9c0b70270 --- /dev/null +++ b/arch/m68knommu/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/kdebug.h b/arch/m68knommu/include/asm/kdebug.h new file mode 100644 index 000000000000..6ece1b037665 --- /dev/null +++ b/arch/m68knommu/include/asm/kdebug.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/kmap_types.h b/arch/m68knommu/include/asm/kmap_types.h new file mode 100644 index 000000000000..bfb6707575d1 --- /dev/null +++ b/arch/m68knommu/include/asm/kmap_types.h @@ -0,0 +1,21 @@ +#ifndef __ASM_M68K_KMAP_TYPES_H +#define __ASM_M68K_KMAP_TYPES_H + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif diff --git a/arch/m68knommu/include/asm/linkage.h b/arch/m68knommu/include/asm/linkage.h new file mode 100644 index 000000000000..c288a19ff489 --- /dev/null +++ b/arch/m68knommu/include/asm/linkage.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/local.h b/arch/m68knommu/include/asm/local.h new file mode 100644 index 000000000000..84a39c1b86f8 --- /dev/null +++ b/arch/m68knommu/include/asm/local.h @@ -0,0 +1,6 @@ +#ifndef __M68KNOMMU_LOCAL_H +#define __M68KNOMMU_LOCAL_H + +#include + +#endif /* __M68KNOMMU_LOCAL_H */ diff --git a/arch/m68knommu/include/asm/m5206sim.h b/arch/m68knommu/include/asm/m5206sim.h new file mode 100644 index 000000000000..7e3594dea88b --- /dev/null +++ b/arch/m68knommu/include/asm/m5206sim.h @@ -0,0 +1,131 @@ +/****************************************************************************/ + +/* + * m5206sim.h -- ColdFire 5206 System Integration Module support. + * + * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef m5206sim_h +#define m5206sim_h +/****************************************************************************/ + + +/* + * Define the 5206 SIM register set addresses. + */ +#define MCFSIM_SIMR 0x03 /* SIM Config reg (r/w) */ +#define MCFSIM_ICR1 0x14 /* Intr Ctrl reg 1 (r/w) */ +#define MCFSIM_ICR2 0x15 /* Intr Ctrl reg 2 (r/w) */ +#define MCFSIM_ICR3 0x16 /* Intr Ctrl reg 3 (r/w) */ +#define MCFSIM_ICR4 0x17 /* Intr Ctrl reg 4 (r/w) */ +#define MCFSIM_ICR5 0x18 /* Intr Ctrl reg 5 (r/w) */ +#define MCFSIM_ICR6 0x19 /* Intr Ctrl reg 6 (r/w) */ +#define MCFSIM_ICR7 0x1a /* Intr Ctrl reg 7 (r/w) */ +#define MCFSIM_ICR8 0x1b /* Intr Ctrl reg 8 (r/w) */ +#define MCFSIM_ICR9 0x1c /* Intr Ctrl reg 9 (r/w) */ +#define MCFSIM_ICR10 0x1d /* Intr Ctrl reg 10 (r/w) */ +#define MCFSIM_ICR11 0x1e /* Intr Ctrl reg 11 (r/w) */ +#define MCFSIM_ICR12 0x1f /* Intr Ctrl reg 12 (r/w) */ +#define MCFSIM_ICR13 0x20 /* Intr Ctrl reg 13 (r/w) */ +#ifdef CONFIG_M5206e +#define MCFSIM_ICR14 0x21 /* Intr Ctrl reg 14 (r/w) */ +#define MCFSIM_ICR15 0x22 /* Intr Ctrl reg 15 (r/w) */ +#endif + +#define MCFSIM_IMR 0x36 /* Interrupt Mask reg (r/w) */ +#define MCFSIM_IPR 0x3a /* Interrupt Pend reg (r/w) */ + +#define MCFSIM_RSR 0x40 /* Reset Status reg (r/w) */ +#define MCFSIM_SYPCR 0x41 /* System Protection reg (r/w)*/ + +#define MCFSIM_SWIVR 0x42 /* SW Watchdog intr reg (r/w) */ +#define MCFSIM_SWSR 0x43 /* SW Watchdog service (r/w) */ + +#define MCFSIM_DCRR 0x46 /* DRAM Refresh reg (r/w) */ +#define MCFSIM_DCTR 0x4a /* DRAM Timing reg (r/w) */ +#define MCFSIM_DAR0 0x4c /* DRAM 0 Address reg(r/w) */ +#define MCFSIM_DMR0 0x50 /* DRAM 0 Mask reg (r/w) */ +#define MCFSIM_DCR0 0x57 /* DRAM 0 Control reg (r/w) */ +#define MCFSIM_DAR1 0x58 /* DRAM 1 Address reg (r/w) */ +#define MCFSIM_DMR1 0x5c /* DRAM 1 Mask reg (r/w) */ +#define MCFSIM_DCR1 0x63 /* DRAM 1 Control reg (r/w) */ + +#define MCFSIM_CSAR0 0x64 /* CS 0 Address 0 reg (r/w) */ +#define MCFSIM_CSMR0 0x68 /* CS 0 Mask 0 reg (r/w) */ +#define MCFSIM_CSCR0 0x6e /* CS 0 Control reg (r/w) */ +#define MCFSIM_CSAR1 0x70 /* CS 1 Address reg (r/w) */ +#define MCFSIM_CSMR1 0x74 /* CS 1 Mask reg (r/w) */ +#define MCFSIM_CSCR1 0x7a /* CS 1 Control reg (r/w) */ +#define MCFSIM_CSAR2 0x7c /* CS 2 Address reg (r/w) */ +#define MCFSIM_CSMR2 0x80 /* CS 2 Mask reg (r/w) */ +#define MCFSIM_CSCR2 0x86 /* CS 2 Control reg (r/w) */ +#define MCFSIM_CSAR3 0x88 /* CS 3 Address reg (r/w) */ +#define MCFSIM_CSMR3 0x8c /* CS 3 Mask reg (r/w) */ +#define MCFSIM_CSCR3 0x92 /* CS 3 Control reg (r/w) */ +#define MCFSIM_CSAR4 0x94 /* CS 4 Address reg (r/w) */ +#define MCFSIM_CSMR4 0x98 /* CS 4 Mask reg (r/w) */ +#define MCFSIM_CSCR4 0x9e /* CS 4 Control reg (r/w) */ +#define MCFSIM_CSAR5 0xa0 /* CS 5 Address reg (r/w) */ +#define MCFSIM_CSMR5 0xa4 /* CS 5 Mask reg (r/w) */ +#define MCFSIM_CSCR5 0xaa /* CS 5 Control reg (r/w) */ +#define MCFSIM_CSAR6 0xac /* CS 6 Address reg (r/w) */ +#define MCFSIM_CSMR6 0xb0 /* CS 6 Mask reg (r/w) */ +#define MCFSIM_CSCR6 0xb6 /* CS 6 Control reg (r/w) */ +#define MCFSIM_CSAR7 0xb8 /* CS 7 Address reg (r/w) */ +#define MCFSIM_CSMR7 0xbc /* CS 7 Mask reg (r/w) */ +#define MCFSIM_CSCR7 0xc2 /* CS 7 Control reg (r/w) */ +#define MCFSIM_DMCR 0xc6 /* Default control */ + +#ifdef CONFIG_M5206e +#define MCFSIM_PAR 0xca /* Pin Assignment reg (r/w) */ +#else +#define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */ +#endif + +#define MCFSIM_PADDR 0x1c5 /* Parallel Direction (r/w) */ +#define MCFSIM_PADAT 0x1c9 /* Parallel Port Value (r/w) */ + +/* + * Some symbol defines for the Parallel Port Pin Assignment Register + */ +#ifdef CONFIG_M5206e +#define MCFSIM_PAR_DREQ0 0x100 /* Set to select DREQ0 input */ + /* Clear to select T0 input */ +#define MCFSIM_PAR_DREQ1 0x200 /* Select DREQ1 input */ + /* Clear to select T0 output */ +#endif + +/* + * Some symbol defines for the Interrupt Control Register + */ +#define MCFSIM_SWDICR MCFSIM_ICR8 /* Watchdog timer ICR */ +#define MCFSIM_TIMER1ICR MCFSIM_ICR9 /* Timer 1 ICR */ +#define MCFSIM_TIMER2ICR MCFSIM_ICR10 /* Timer 2 ICR */ +#define MCFSIM_UART1ICR MCFSIM_ICR12 /* UART 1 ICR */ +#define MCFSIM_UART2ICR MCFSIM_ICR13 /* UART 2 ICR */ +#ifdef CONFIG_M5206e +#define MCFSIM_DMA1ICR MCFSIM_ICR14 /* DMA 1 ICR */ +#define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */ +#endif + +#if defined(CONFIG_M5206e) +#define MCFSIM_IMR_MASKALL 0xfffe /* All SIM intr sources */ +#endif + +/* + * Macro to get and set IMR register. It is 16 bits on the 5206. + */ +#define mcf_getimr() \ + *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) + +#define mcf_setimr(imr) \ + *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr) + +#define mcf_getipr() \ + *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR)) + +/****************************************************************************/ +#endif /* m5206sim_h */ diff --git a/arch/m68knommu/include/asm/m520xsim.h b/arch/m68knommu/include/asm/m520xsim.h new file mode 100644 index 000000000000..49d016e6391a --- /dev/null +++ b/arch/m68knommu/include/asm/m520xsim.h @@ -0,0 +1,63 @@ +/****************************************************************************/ + +/* + * m520xsim.h -- ColdFire 5207/5208 System Integration Module support. + * + * (C) Copyright 2005, Intec Automation (mike@steroidmicros.com) + */ + +/****************************************************************************/ +#ifndef m520xsim_h +#define m520xsim_h +/****************************************************************************/ + + +/* + * Define the 5282 SIM register set addresses. + */ +#define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */ +#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ +#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ +#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ +#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ +#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ +#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ +#define MCFINTC_ICR0 0x40 /* Base ICR register */ + +#define MCFINT_VECBASE 64 +#define MCFINT_UART0 26 /* Interrupt number for UART0 */ +#define MCFINT_UART1 27 /* Interrupt number for UART1 */ +#define MCFINT_UART2 28 /* Interrupt number for UART2 */ +#define MCFINT_QSPI 31 /* Interrupt number for QSPI */ +#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */ + +/* + * SDRAM configuration registers. + */ +#define MCFSIM_SDMR 0x000a8000 /* SDRAM Mode/Extended Mode Register */ +#define MCFSIM_SDCR 0x000a8004 /* SDRAM Control Register */ +#define MCFSIM_SDCFG1 0x000a8008 /* SDRAM Configuration Register 1 */ +#define MCFSIM_SDCFG2 0x000a800c /* SDRAM Configuration Register 2 */ +#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */ +#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */ + + +#define MCF_GPIO_PAR_UART (0xA4036) +#define MCF_GPIO_PAR_FECI2C (0xA4033) +#define MCF_GPIO_PAR_FEC (0xA4038) + +#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001) +#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0002) + +#define MCF_GPIO_PAR_UART_PAR_URXD1 (0x0040) +#define MCF_GPIO_PAR_UART_PAR_UTXD1 (0x0080) + +#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) +#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) + +#define ICR_INTRCONF 0x05 +#define MCFPIT_IMR MCFINTC_IMRL +#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1) + +/****************************************************************************/ +#endif /* m520xsim_h */ diff --git a/arch/m68knommu/include/asm/m523xsim.h b/arch/m68knommu/include/asm/m523xsim.h new file mode 100644 index 000000000000..bf397313e93f --- /dev/null +++ b/arch/m68knommu/include/asm/m523xsim.h @@ -0,0 +1,45 @@ +/****************************************************************************/ + +/* + * m523xsim.h -- ColdFire 523x System Integration Module support. + * + * (C) Copyright 2003-2005, Greg Ungerer + */ + +/****************************************************************************/ +#ifndef m523xsim_h +#define m523xsim_h +/****************************************************************************/ + + +/* + * Define the 523x SIM register set addresses. + */ +#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ +#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */ +#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ +#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ +#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ +#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ +#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ +#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ +#define MCFINTC_IRLR 0x18 /* */ +#define MCFINTC_IACKL 0x19 /* */ +#define MCFINTC_ICR0 0x40 /* Base ICR register */ + +#define MCFINT_VECBASE 64 /* Vector base number */ +#define MCFINT_UART0 13 /* Interrupt number for UART0 */ +#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ +#define MCFINT_QSPI 18 /* Interrupt number for QSPI */ + +/* + * SDRAM configuration registers. + */ +#define MCFSIM_DCR 0x44 /* SDRAM control */ +#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ +#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ +#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ +#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ + +/****************************************************************************/ +#endif /* m523xsim_h */ diff --git a/arch/m68knommu/include/asm/m5249sim.h b/arch/m68knommu/include/asm/m5249sim.h new file mode 100644 index 000000000000..366eb8602d2f --- /dev/null +++ b/arch/m68knommu/include/asm/m5249sim.h @@ -0,0 +1,209 @@ +/****************************************************************************/ + +/* + * m5249sim.h -- ColdFire 5249 System Integration Module support. + * + * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) + */ + +/****************************************************************************/ +#ifndef m5249sim_h +#define m5249sim_h +/****************************************************************************/ + +/* + * Define the 5249 SIM register set addresses. + */ +#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ +#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ +#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ +#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ +#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ +#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ +#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ +#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ +#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ +#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ +#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ +#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ +#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ +#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ +#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ +#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ +#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ +#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ +#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ +#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ +#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ +#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ + +#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ +#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ +#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ +#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ +#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ +#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ +#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ +#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ +#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ +#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ +#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ +#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ + +#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ +#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ +#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ +#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ +#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ + + +/* + * Some symbol defines for the above... + */ +#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ +#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ +#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ +#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ +#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ +#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ +#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ +#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ +#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ + +/* + * General purpose IO registers (in MBAR2). + */ +#define MCFSIM2_GPIOREAD 0x0 /* GPIO read values */ +#define MCFSIM2_GPIOWRITE 0x4 /* GPIO write values */ +#define MCFSIM2_GPIOENABLE 0x8 /* GPIO enabled */ +#define MCFSIM2_GPIOFUNC 0xc /* GPIO function */ +#define MCFSIM2_GPIO1READ 0xb0 /* GPIO1 read values */ +#define MCFSIM2_GPIO1WRITE 0xb4 /* GPIO1 write values */ +#define MCFSIM2_GPIO1ENABLE 0xb8 /* GPIO1 enabled */ +#define MCFSIM2_GPIO1FUNC 0xbc /* GPIO1 function */ + +#define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */ +#define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */ +#define MCFSIM2_GPIOINTENABLE 0xc4 /* GPIO interrupt enable */ + +#define MCFSIM2_INTLEVEL1 0x140 /* Interrupt level reg 1 */ +#define MCFSIM2_INTLEVEL2 0x144 /* Interrupt level reg 2 */ +#define MCFSIM2_INTLEVEL3 0x148 /* Interrupt level reg 3 */ +#define MCFSIM2_INTLEVEL4 0x14c /* Interrupt level reg 4 */ +#define MCFSIM2_INTLEVEL5 0x150 /* Interrupt level reg 5 */ +#define MCFSIM2_INTLEVEL6 0x154 /* Interrupt level reg 6 */ +#define MCFSIM2_INTLEVEL7 0x158 /* Interrupt level reg 7 */ +#define MCFSIM2_INTLEVEL8 0x15c /* Interrupt level reg 8 */ + +#define MCFSIM2_DMAROUTE 0x188 /* DMA routing */ + +#define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */ +#define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */ + + +/* + * Macro to set IMR register. It is 32 bits on the 5249. + */ +#define MCFSIM_IMR_MASKALL 0x7fffe /* All SIM intr sources */ + +#define mcf_getimr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) + +#define mcf_setimr(imr) \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); + +#define mcf_getipr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) + +/****************************************************************************/ + +#ifdef __ASSEMBLER__ + +/* + * The M5249C3 board needs a little help getting all its SIM devices + * initialized at kernel start time. dBUG doesn't set much up, so + * we need to do it manually. + */ +.macro m5249c3_setup + /* + * Set MBAR1 and MBAR2, just incase they are not set. + */ + movel #0x10000001,%a0 + movec %a0,%MBAR /* map MBAR region */ + subql #1,%a0 /* get MBAR address in a0 */ + + movel #0x80000001,%a1 + movec %a1,#3086 /* map MBAR2 region */ + subql #1,%a1 /* get MBAR2 address in a1 */ + + /* + * Move secondary interrupts to base at 128. + */ + moveb #0x80,%d0 + moveb %d0,0x16b(%a1) /* interrupt base register */ + + /* + * Work around broken CSMR0/DRAM vector problem. + */ + movel #0x001F0021,%d0 /* disable C/I bit */ + movel %d0,0x84(%a0) /* set CSMR0 */ + + /* + * Disable the PLL firstly. (Who knows what state it is + * in here!). + */ + movel 0x180(%a1),%d0 /* get current PLL value */ + andl #0xfffffffe,%d0 /* PLL bypass first */ + movel %d0,0x180(%a1) /* set PLL register */ + nop + +#if CONFIG_CLOCK_FREQ == 140000000 + /* + * Set initial clock frequency. This assumes M5249C3 board + * is fitted with 11.2896MHz crystal. It will program the + * PLL for 140MHz. Lets go fast :-) + */ + movel #0x125a40f0,%d0 /* set for 140MHz */ + movel %d0,0x180(%a1) /* set PLL register */ + orl #0x1,%d0 + movel %d0,0x180(%a1) /* set PLL register */ +#endif + + /* + * Setup CS1 for ethernet controller. + * (Setup as per M5249C3 doco). + */ + movel #0xe0000000,%d0 /* CS1 mapped at 0xe0000000 */ + movel %d0,0x8c(%a0) + movel #0x001f0021,%d0 /* CS1 size of 1Mb */ + movel %d0,0x90(%a0) + movew #0x0080,%d0 /* CS1 = 16bit port, AA */ + movew %d0,0x96(%a0) + + /* + * Setup CS2 for IDE interface. + */ + movel #0x50000000,%d0 /* CS2 mapped at 0x50000000 */ + movel %d0,0x98(%a0) + movel #0x001f0001,%d0 /* CS2 size of 1MB */ + movel %d0,0x9c(%a0) + movew #0x0080,%d0 /* CS2 = 16bit, TA */ + movew %d0,0xa2(%a0) + + movel #0x00107000,%d0 /* IDEconfig1 */ + movel %d0,0x18c(%a1) + movel #0x000c0400,%d0 /* IDEconfig2 */ + movel %d0,0x190(%a1) + + movel #0x00080000,%d0 /* GPIO19, IDE reset bit */ + orl %d0,0xc(%a1) /* function GPIO19 */ + orl %d0,0x8(%a1) /* enable GPIO19 as output */ + orl %d0,0x4(%a1) /* de-assert IDE reset */ +.endm + +#define PLATFORM_SETUP m5249c3_setup + +#endif /* __ASSEMBLER__ */ + +/****************************************************************************/ +#endif /* m5249sim_h */ diff --git a/arch/m68knommu/include/asm/m5272sim.h b/arch/m68knommu/include/asm/m5272sim.h new file mode 100644 index 000000000000..6217edc21139 --- /dev/null +++ b/arch/m68knommu/include/asm/m5272sim.h @@ -0,0 +1,78 @@ +/****************************************************************************/ + +/* + * m5272sim.h -- ColdFire 5272 System Integration Module support. + * + * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef m5272sim_h +#define m5272sim_h +/****************************************************************************/ + + +/* + * Define the 5272 SIM register set addresses. + */ +#define MCFSIM_SCR 0x04 /* SIM Config reg (r/w) */ +#define MCFSIM_SPR 0x06 /* System Protection reg (r/w)*/ +#define MCFSIM_PMR 0x08 /* Power Management reg (r/w) */ +#define MCFSIM_APMR 0x0e /* Active Low Power reg (r/w) */ +#define MCFSIM_DIR 0x10 /* Device Identity reg (r/w) */ + +#define MCFSIM_ICR1 0x20 /* Intr Ctrl reg 1 (r/w) */ +#define MCFSIM_ICR2 0x24 /* Intr Ctrl reg 2 (r/w) */ +#define MCFSIM_ICR3 0x28 /* Intr Ctrl reg 3 (r/w) */ +#define MCFSIM_ICR4 0x2c /* Intr Ctrl reg 4 (r/w) */ + +#define MCFSIM_ISR 0x30 /* Interrupt Source reg (r/w) */ +#define MCFSIM_PITR 0x34 /* Interrupt Transition (r/w) */ +#define MCFSIM_PIWR 0x38 /* Interrupt Wakeup reg (r/w) */ +#define MCFSIM_PIVR 0x3f /* Interrupt Vector reg (r/w( */ + +#define MCFSIM_WRRR 0x280 /* Watchdog reference (r/w) */ +#define MCFSIM_WIRR 0x284 /* Watchdog interrupt (r/w) */ +#define MCFSIM_WCR 0x288 /* Watchdog counter (r/w) */ +#define MCFSIM_WER 0x28c /* Watchdog event (r/w) */ + +#define MCFSIM_CSBR0 0x40 /* CS0 Base Address (r/w) */ +#define MCFSIM_CSOR0 0x44 /* CS0 Option (r/w) */ +#define MCFSIM_CSBR1 0x48 /* CS1 Base Address (r/w) */ +#define MCFSIM_CSOR1 0x4c /* CS1 Option (r/w) */ +#define MCFSIM_CSBR2 0x50 /* CS2 Base Address (r/w) */ +#define MCFSIM_CSOR2 0x54 /* CS2 Option (r/w) */ +#define MCFSIM_CSBR3 0x58 /* CS3 Base Address (r/w) */ +#define MCFSIM_CSOR3 0x5c /* CS3 Option (r/w) */ +#define MCFSIM_CSBR4 0x60 /* CS4 Base Address (r/w) */ +#define MCFSIM_CSOR4 0x64 /* CS4 Option (r/w) */ +#define MCFSIM_CSBR5 0x68 /* CS5 Base Address (r/w) */ +#define MCFSIM_CSOR5 0x6c /* CS5 Option (r/w) */ +#define MCFSIM_CSBR6 0x70 /* CS6 Base Address (r/w) */ +#define MCFSIM_CSOR6 0x74 /* CS6 Option (r/w) */ +#define MCFSIM_CSBR7 0x78 /* CS7 Base Address (r/w) */ +#define MCFSIM_CSOR7 0x7c /* CS7 Option (r/w) */ + +#define MCFSIM_SDCR 0x180 /* SDRAM Configuration (r/w) */ +#define MCFSIM_SDTR 0x184 /* SDRAM Timing (r/w) */ +#define MCFSIM_DCAR0 0x4c /* DRAM 0 Address reg(r/w) */ +#define MCFSIM_DCMR0 0x50 /* DRAM 0 Mask reg (r/w) */ +#define MCFSIM_DCCR0 0x57 /* DRAM 0 Control reg (r/w) */ +#define MCFSIM_DCAR1 0x58 /* DRAM 1 Address reg (r/w) */ +#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ +#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ + +#define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */ +#define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */ +#define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */ +#define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */ +#define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */ +#define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */ +#define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */ +#define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */ +#define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */ + + +/****************************************************************************/ +#endif /* m5272sim_h */ diff --git a/arch/m68knommu/include/asm/m527xsim.h b/arch/m68knommu/include/asm/m527xsim.h new file mode 100644 index 000000000000..1f63ab3fb3e6 --- /dev/null +++ b/arch/m68knommu/include/asm/m527xsim.h @@ -0,0 +1,74 @@ +/****************************************************************************/ + +/* + * m527xsim.h -- ColdFire 5270/5271 System Integration Module support. + * + * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com) + */ + +/****************************************************************************/ +#ifndef m527xsim_h +#define m527xsim_h +/****************************************************************************/ + + +/* + * Define the 5270/5271 SIM register set addresses. + */ +#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ +#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */ +#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ +#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ +#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ +#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ +#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ +#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ +#define MCFINTC_IRLR 0x18 /* */ +#define MCFINTC_IACKL 0x19 /* */ +#define MCFINTC_ICR0 0x40 /* Base ICR register */ + +#define MCFINT_VECBASE 64 /* Vector base number */ +#define MCFINT_UART0 13 /* Interrupt number for UART0 */ +#define MCFINT_UART1 14 /* Interrupt number for UART1 */ +#define MCFINT_UART2 15 /* Interrupt number for UART2 */ +#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ + +/* + * SDRAM configuration registers. + */ +#ifdef CONFIG_M5271 +#define MCFSIM_DCR 0x40 /* SDRAM control */ +#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ +#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ +#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ +#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ +#endif +#ifdef CONFIG_M5275 +#define MCFSIM_DMR 0x40 /* SDRAM mode */ +#define MCFSIM_DCR 0x44 /* SDRAM control */ +#define MCFSIM_DCFG1 0x48 /* SDRAM configuration 1 */ +#define MCFSIM_DCFG2 0x4c /* SDRAM configuration 2 */ +#define MCFSIM_DBAR0 0x50 /* SDRAM base address 0 */ +#define MCFSIM_DMR0 0x54 /* SDRAM address mask 0 */ +#define MCFSIM_DBAR1 0x58 /* SDRAM base address 1 */ +#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */ +#endif + +/* + * GPIO pins setups to enable the UARTs. + */ +#ifdef CONFIG_M5271 +#define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */ +#define UART0_ENABLE_MASK 0x000f +#define UART1_ENABLE_MASK 0x0ff0 +#define UART2_ENABLE_MASK 0x3000 +#endif +#ifdef CONFIG_M5275 +#define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */ +#define UART0_ENABLE_MASK 0x000f +#define UART1_ENABLE_MASK 0x00f0 +#define UART2_ENABLE_MASK 0x3f00 +#endif + +/****************************************************************************/ +#endif /* m527xsim_h */ diff --git a/arch/m68knommu/include/asm/m528xsim.h b/arch/m68knommu/include/asm/m528xsim.h new file mode 100644 index 000000000000..28bf783a5d6d --- /dev/null +++ b/arch/m68knommu/include/asm/m528xsim.h @@ -0,0 +1,159 @@ +/****************************************************************************/ + +/* + * m528xsim.h -- ColdFire 5280/5282 System Integration Module support. + * + * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com) + */ + +/****************************************************************************/ +#ifndef m528xsim_h +#define m528xsim_h +/****************************************************************************/ + + +/* + * Define the 5280/5282 SIM register set addresses. + */ +#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ +#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */ +#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ +#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ +#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ +#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ +#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ +#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ +#define MCFINTC_IRLR 0x18 /* */ +#define MCFINTC_IACKL 0x19 /* */ +#define MCFINTC_ICR0 0x40 /* Base ICR register */ + +#define MCFINT_VECBASE 64 /* Vector base number */ +#define MCFINT_UART0 13 /* Interrupt number for UART0 */ +#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */ + +/* + * SDRAM configuration registers. + */ +#define MCFSIM_DCR 0x44 /* SDRAM control */ +#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ +#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ +#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ +#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ + +/* + * Derek Cheung - 6 Feb 2005 + * add I2C and QSPI register definition using Freescale's MCF5282 + */ +/* set Port AS pin for I2C or UART */ +#define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056) + +/* Port UA Pin Assignment Register (8 Bit) */ +#define MCF5282_GPIO_PUAPAR 0x10005C + +/* Interrupt Mask Register Register Low */ +#define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C) +/* Interrupt Control Register 7 */ +#define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51) + + + +/********************************************************************* +* +* Inter-IC (I2C) Module +* +*********************************************************************/ +/* Read/Write access macros for general use */ +#define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address +#define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider +#define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control +#define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status +#define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O + +/* Bit level definitions and macros */ +#define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) + +#define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F)) + +#define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable +#define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable +#define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode +#define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode +#define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable +#define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start + +#define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit +#define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave +#define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy +#define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost +#define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write +#define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt +#define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge + + + +/********************************************************************* +* +* Queued Serial Peripheral Interface (QSPI) Module +* +*********************************************************************/ +/* Derek - 21 Feb 2005 */ +/* change to the format used in I2C */ +/* Read/Write access macros for general use */ +#define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340 +#define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344 +#define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348 +#define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C +#define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350 +#define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354 +#define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354 + +/* Bit level definitions and macros */ +#define MCF5282_QSPI_QMR_MSTR (0x8000) +#define MCF5282_QSPI_QMR_DOHIE (0x4000) +#define MCF5282_QSPI_QMR_BITS_16 (0x0000) +#define MCF5282_QSPI_QMR_BITS_8 (0x2000) +#define MCF5282_QSPI_QMR_BITS_9 (0x2400) +#define MCF5282_QSPI_QMR_BITS_10 (0x2800) +#define MCF5282_QSPI_QMR_BITS_11 (0x2C00) +#define MCF5282_QSPI_QMR_BITS_12 (0x3000) +#define MCF5282_QSPI_QMR_BITS_13 (0x3400) +#define MCF5282_QSPI_QMR_BITS_14 (0x3800) +#define MCF5282_QSPI_QMR_BITS_15 (0x3C00) +#define MCF5282_QSPI_QMR_CPOL (0x0200) +#define MCF5282_QSPI_QMR_CPHA (0x0100) +#define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF)) + +#define MCF5282_QSPI_QDLYR_SPE (0x80) +#define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) +#define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF)) + +#define MCF5282_QSPI_QWR_HALT (0x8000) +#define MCF5282_QSPI_QWR_WREN (0x4000) +#define MCF5282_QSPI_QWR_WRTO (0x2000) +#define MCF5282_QSPI_QWR_CSIV (0x1000) +#define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) +#define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4) +#define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F)) + +#define MCF5282_QSPI_QIR_WCEFB (0x8000) +#define MCF5282_QSPI_QIR_ABRTB (0x4000) +#define MCF5282_QSPI_QIR_ABRTL (0x1000) +#define MCF5282_QSPI_QIR_WCEFE (0x0800) +#define MCF5282_QSPI_QIR_ABRTE (0x0400) +#define MCF5282_QSPI_QIR_SPIFE (0x0100) +#define MCF5282_QSPI_QIR_WCEF (0x0008) +#define MCF5282_QSPI_QIR_ABRT (0x0004) +#define MCF5282_QSPI_QIR_SPIF (0x0001) + +#define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F)) + +#define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00)) +#define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8) +#define MCF5282_QSPI_QCR_CONT (0x8000) +#define MCF5282_QSPI_QCR_BITSE (0x4000) +#define MCF5282_QSPI_QCR_DT (0x2000) +#define MCF5282_QSPI_QCR_DSCK (0x1000) +#define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8) + +/****************************************************************************/ +#endif /* m528xsim_h */ diff --git a/arch/m68knommu/include/asm/m5307sim.h b/arch/m68knommu/include/asm/m5307sim.h new file mode 100644 index 000000000000..5886728409c0 --- /dev/null +++ b/arch/m68knommu/include/asm/m5307sim.h @@ -0,0 +1,181 @@ +/****************************************************************************/ + +/* + * m5307sim.h -- ColdFire 5307 System Integration Module support. + * + * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd. + * (C) Copyright 1999, Lineo (www.lineo.com) + * + * Modified by David W. Miller for the MCF5307 Eval Board. + */ + +/****************************************************************************/ +#ifndef m5307sim_h +#define m5307sim_h +/****************************************************************************/ + +/* + * Define the 5307 SIM register set addresses. + */ +#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ +#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ +#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ +#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ +#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ +#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ +#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ +#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ +#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ +#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ +#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ +#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ +#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ +#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ +#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ +#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ +#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ +#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ +#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ +#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ +#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ +#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ +#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ + +#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ +#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ +#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ +#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ +#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ +#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ + +#ifdef CONFIG_OLDMASK +#define MCFSIM_CSBAR 0x98 /* CS Base Address reg (r/w) */ +#define MCFSIM_CSBAMR 0x9c /* CS Base Mask reg (r/w) */ +#define MCFSIM_CSMR2 0x9e /* CS 2 Mask reg (r/w) */ +#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ +#define MCFSIM_CSMR3 0xaa /* CS 3 Mask reg (r/w) */ +#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ +#define MCFSIM_CSMR4 0xb6 /* CS 4 Mask reg (r/w) */ +#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ +#define MCFSIM_CSMR5 0xc2 /* CS 5 Mask reg (r/w) */ +#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ +#define MCFSIM_CSMR6 0xce /* CS 6 Mask reg (r/w) */ +#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ +#define MCFSIM_CSMR7 0xda /* CS 7 Mask reg (r/w) */ +#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ +#else +#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ +#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ +#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ +#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ +#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ +#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ +#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ +#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ +#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ +#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */ +#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */ +#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ +#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */ +#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */ +#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ +#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */ +#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */ +#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ +#endif /* CONFIG_OLDMASK */ + +#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ +#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ +#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ +#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ +#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ + +#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ +#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ + + +/* Definition offset address for CS2-7 -- old mask 5307 */ + +#define MCF5307_CS2 (0x400000) +#define MCF5307_CS3 (0x600000) +#define MCF5307_CS4 (0x800000) +#define MCF5307_CS5 (0xA00000) +#define MCF5307_CS6 (0xC00000) +#define MCF5307_CS7 (0xE00000) + + +/* + * Some symbol defines for the above... + */ +#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ +#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ +#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ +#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ +#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ +#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ +#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ +#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ +#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ + +#if defined(CONFIG_M5307) +#define MCFSIM_IMR_MASKALL 0x3fffe /* All SIM intr sources */ +#endif + +/* + * Macro to set IMR register. It is 32 bits on the 5307. + */ +#define mcf_getimr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) + +#define mcf_setimr(imr) \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); + +#define mcf_getipr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) + + +/* + * Some symbol defines for the Parallel Port Pin Assignment Register + */ +#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */ + /* Clear to select par I/O */ +#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */ + /* Clear to select par I/O */ + +/* + * Defines for the IRQPAR Register + */ +#define IRQ5_LEVEL4 0x80 +#define IRQ3_LEVEL6 0x40 +#define IRQ1_LEVEL2 0x20 + + +/* + * Define the Cache register flags. + */ +#define CACR_EC (1<<31) +#define CACR_ESB (1<<29) +#define CACR_DPI (1<<28) +#define CACR_HLCK (1<<27) +#define CACR_CINVA (1<<24) +#define CACR_DNFB (1<<10) +#define CACR_DCM_WTHRU (0<<8) +#define CACR_DCM_WBACK (1<<8) +#define CACR_DCM_OFF_PRE (2<<8) +#define CACR_DCM_OFF_IMP (3<<8) +#define CACR_DW (1<<5) + +#define ACR_BASE_POS 24 +#define ACR_MASK_POS 16 +#define ACR_ENABLE (1<<15) +#define ACR_USER (0<<13) +#define ACR_SUPER (1<<13) +#define ACR_ANY (2<<13) +#define ACR_CM_WTHRU (0<<5) +#define ACR_CM_WBACK (1<<5) +#define ACR_CM_OFF_PRE (2<<5) +#define ACR_CM_OFF_IMP (3<<5) +#define ACR_WPROTECT (1<<2) + +/****************************************************************************/ +#endif /* m5307sim_h */ diff --git a/arch/m68knommu/include/asm/m532xsim.h b/arch/m68knommu/include/asm/m532xsim.h new file mode 100644 index 000000000000..1835fd20a82c --- /dev/null +++ b/arch/m68knommu/include/asm/m532xsim.h @@ -0,0 +1,2238 @@ +/****************************************************************************/ + +/* + * m532xsim.h -- ColdFire 5329 registers + */ + +/****************************************************************************/ +#ifndef m532xsim_h +#define m532xsim_h +/****************************************************************************/ + +#define MCF_REG32(x) (*(volatile unsigned long *)(x)) +#define MCF_REG16(x) (*(volatile unsigned short *)(x)) +#define MCF_REG08(x) (*(volatile unsigned char *)(x)) + +#define MCFINT_VECBASE 64 +#define MCFINT_UART0 26 /* Interrupt number for UART0 */ +#define MCFINT_UART1 27 /* Interrupt number for UART1 */ + +#define MCF_WTM_WCR MCF_REG16(0xFC098000) + +/* + * Define the 532x SIM register set addresses. + */ +#define MCFSIM_IPRL 0xFC048004 +#define MCFSIM_IPRH 0xFC048000 +#define MCFSIM_IPR MCFSIM_IPRL +#define MCFSIM_IMRL 0xFC04800C +#define MCFSIM_IMRH 0xFC048008 +#define MCFSIM_IMR MCFSIM_IMRL +#define MCFSIM_ICR0 0xFC048040 +#define MCFSIM_ICR1 0xFC048041 +#define MCFSIM_ICR2 0xFC048042 +#define MCFSIM_ICR3 0xFC048043 +#define MCFSIM_ICR4 0xFC048044 +#define MCFSIM_ICR5 0xFC048045 +#define MCFSIM_ICR6 0xFC048046 +#define MCFSIM_ICR7 0xFC048047 +#define MCFSIM_ICR8 0xFC048048 +#define MCFSIM_ICR9 0xFC048049 +#define MCFSIM_ICR10 0xFC04804A +#define MCFSIM_ICR11 0xFC04804B + +/* + * Some symbol defines for the above... + */ +#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ +#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ +#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ +#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ +#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ +#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ +#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ +#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ +#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ + + +#define MCFSIM_IMR_MASKALL 0xFFFFFFFF /* All SIM intr sources */ + +#define MCFSIM_IMR_SIMR0 0xFC04801C +#define MCFSIM_IMR_SIMR1 0xFC04C01C +#define MCFSIM_IMR_CIMR0 0xFC04801D +#define MCFSIM_IMR_CIMR1 0xFC04C01D + +#define MCFSIM_ICR_TIMER1 (0xFC048040+32) +#define MCFSIM_ICR_TIMER2 (0xFC048040+33) + + +/* + * Macro to set IMR register. It is 32 bits on the 5307. + */ +#define mcf_getimr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) + +#define mcf_setimr(imr) \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); + +#define mcf_getipr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) + +#define mcf_getiprl() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL)) + +#define mcf_getiprh() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH)) + + +#define mcf_enable_irq0(irq) \ + *((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq); + +#define mcf_enable_irq1(irq) \ + *((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq); + +#define mcf_disable_irq0(irq) \ + *((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq); + +#define mcf_disable_irq1(irq) \ + *((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq); + +/* + * Define the Cache register flags. + */ +#define CACR_EC (1<<31) +#define CACR_ESB (1<<29) +#define CACR_DPI (1<<28) +#define CACR_HLCK (1<<27) +#define CACR_CINVA (1<<24) +#define CACR_DNFB (1<<10) +#define CACR_DCM_WTHRU (0<<8) +#define CACR_DCM_WBACK (1<<8) +#define CACR_DCM_OFF_PRE (2<<8) +#define CACR_DCM_OFF_IMP (3<<8) +#define CACR_DW (1<<5) + +#define ACR_BASE_POS 24 +#define ACR_MASK_POS 16 +#define ACR_ENABLE (1<<15) +#define ACR_USER (0<<13) +#define ACR_SUPER (1<<13) +#define ACR_ANY (2<<13) +#define ACR_CM_WTHRU (0<<5) +#define ACR_CM_WBACK (1<<5) +#define ACR_CM_OFF_PRE (2<<5) +#define ACR_CM_OFF_IMP (3<<5) +#define ACR_WPROTECT (1<<2) + +/********************************************************************* + * + * Inter-IC (I2C) Module + * + *********************************************************************/ + +/* Read/Write access macros for general use */ +#define MCF532x_I2C_I2ADR (volatile u8 *) (0xFC058000) // Address +#define MCF532x_I2C_I2FDR (volatile u8 *) (0xFC058004) // Freq Divider +#define MCF532x_I2C_I2CR (volatile u8 *) (0xFC058008) // Control +#define MCF532x_I2C_I2SR (volatile u8 *) (0xFC05800C) // Status +#define MCF532x_I2C_I2DR (volatile u8 *) (0xFC058010) // Data I/O + +/* Bit level definitions and macros */ +#define MCF532x_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) + +#define MCF532x_I2C_I2FDR_IC(x) (((x)&0x3F)) + +#define MCF532x_I2C_I2CR_IEN (0x80) // I2C enable +#define MCF532x_I2C_I2CR_IIEN (0x40) // interrupt enable +#define MCF532x_I2C_I2CR_MSTA (0x20) // master/slave mode +#define MCF532x_I2C_I2CR_MTX (0x10) // transmit/receive mode +#define MCF532x_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable +#define MCF532x_I2C_I2CR_RSTA (0x04) // repeat start + +#define MCF532x_I2C_I2SR_ICF (0x80) // data transfer bit +#define MCF532x_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave +#define MCF532x_I2C_I2SR_IBB (0x20) // I2C bus busy +#define MCF532x_I2C_I2SR_IAL (0x10) // aribitration lost +#define MCF532x_I2C_I2SR_SRW (0x04) // slave read/write +#define MCF532x_I2C_I2SR_IIF (0x02) // I2C interrupt +#define MCF532x_I2C_I2SR_RXAK (0x01) // received acknowledge + +#define MCF532x_PAR_FECI2C (volatile u8 *) (0xFC0A4053) + + +/* + * The M5329EVB board needs a help getting its devices initialized + * at kernel start time if dBUG doesn't set it up (for example + * it is not used), so we need to do it manually. + */ +#ifdef __ASSEMBLER__ +.macro m5329EVB_setup + movel #0xFC098000, %a7 + movel #0x0, (%a7) +#define CORE_SRAM 0x80000000 +#define CORE_SRAM_SIZE 0x8000 + movel #CORE_SRAM, %d0 + addl #0x221, %d0 + movec %d0,%RAMBAR1 + movel #CORE_SRAM, %sp + addl #CORE_SRAM_SIZE, %sp + jsr sysinit +.endm +#define PLATFORM_SETUP m5329EVB_setup + +#endif /* __ASSEMBLER__ */ + +/********************************************************************* + * + * Chip Configuration Module (CCM) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_CCM_CCR MCF_REG16(0xFC0A0004) +#define MCF_CCM_RCON MCF_REG16(0xFC0A0008) +#define MCF_CCM_CIR MCF_REG16(0xFC0A000A) +#define MCF_CCM_MISCCR MCF_REG16(0xFC0A0010) +#define MCF_CCM_CDR MCF_REG16(0xFC0A0012) +#define MCF_CCM_UHCSR MCF_REG16(0xFC0A0014) +#define MCF_CCM_UOCSR MCF_REG16(0xFC0A0016) + +/* Bit definitions and macros for MCF_CCM_CCR */ +#define MCF_CCM_CCR_RESERVED (0x0001) +#define MCF_CCM_CCR_PLL_MODE (0x0003) +#define MCF_CCM_CCR_OSC_MODE (0x0005) +#define MCF_CCM_CCR_BOOTPS(x) (((x)&0x0003)<<3|0x0001) +#define MCF_CCM_CCR_LOAD (0x0021) +#define MCF_CCM_CCR_LIMP (0x0041) +#define MCF_CCM_CCR_CSC(x) (((x)&0x0003)<<8|0x0001) + +/* Bit definitions and macros for MCF_CCM_RCON */ +#define MCF_CCM_RCON_RESERVED (0x0001) +#define MCF_CCM_RCON_PLL_MODE (0x0003) +#define MCF_CCM_RCON_OSC_MODE (0x0005) +#define MCF_CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3|0x0001) +#define MCF_CCM_RCON_LOAD (0x0021) +#define MCF_CCM_RCON_LIMP (0x0041) +#define MCF_CCM_RCON_CSC(x) (((x)&0x0003)<<8|0x0001) + +/* Bit definitions and macros for MCF_CCM_CIR */ +#define MCF_CCM_CIR_PRN(x) (((x)&0x003F)<<0) +#define MCF_CCM_CIR_PIN(x) (((x)&0x03FF)<<6) + +/* Bit definitions and macros for MCF_CCM_MISCCR */ +#define MCF_CCM_MISCCR_USBSRC (0x0001) +#define MCF_CCM_MISCCR_USBDIV (0x0002) +#define MCF_CCM_MISCCR_SSI_SRC (0x0010) +#define MCF_CCM_MISCCR_TIM_DMA (0x0020) +#define MCF_CCM_MISCCR_SSI_PUS (0x0040) +#define MCF_CCM_MISCCR_SSI_PUE (0x0080) +#define MCF_CCM_MISCCR_LCD_CHEN (0x0100) +#define MCF_CCM_MISCCR_LIMP (0x1000) +#define MCF_CCM_MISCCR_PLL_LOCK (0x2000) + +/* Bit definitions and macros for MCF_CCM_CDR */ +#define MCF_CCM_CDR_SSIDIV(x) (((x)&0x000F)<<0) +#define MCF_CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) + +/* Bit definitions and macros for MCF_CCM_UHCSR */ +#define MCF_CCM_UHCSR_XPDE (0x0001) +#define MCF_CCM_UHCSR_UHMIE (0x0002) +#define MCF_CCM_UHCSR_WKUP (0x0004) +#define MCF_CCM_UHCSR_PORTIND(x) (((x)&0x0003)<<14) + +/* Bit definitions and macros for MCF_CCM_UOCSR */ +#define MCF_CCM_UOCSR_XPDE (0x0001) +#define MCF_CCM_UOCSR_UOMIE (0x0002) +#define MCF_CCM_UOCSR_WKUP (0x0004) +#define MCF_CCM_UOCSR_PWRFLT (0x0008) +#define MCF_CCM_UOCSR_SEND (0x0010) +#define MCF_CCM_UOCSR_VVLD (0x0020) +#define MCF_CCM_UOCSR_BVLD (0x0040) +#define MCF_CCM_UOCSR_AVLD (0x0080) +#define MCF_CCM_UOCSR_DPPU (0x0100) +#define MCF_CCM_UOCSR_DCR_VBUS (0x0200) +#define MCF_CCM_UOCSR_CRG_VBUS (0x0400) +#define MCF_CCM_UOCSR_DRV_VBUS (0x0800) +#define MCF_CCM_UOCSR_DMPD (0x1000) +#define MCF_CCM_UOCSR_DPPD (0x2000) +#define MCF_CCM_UOCSR_PORTIND(x) (((x)&0x0003)<<14) + +/********************************************************************* + * + * DMA Timers (DTIM) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_DTIM0_DTMR MCF_REG16(0xFC070000) +#define MCF_DTIM0_DTXMR MCF_REG08(0xFC070002) +#define MCF_DTIM0_DTER MCF_REG08(0xFC070003) +#define MCF_DTIM0_DTRR MCF_REG32(0xFC070004) +#define MCF_DTIM0_DTCR MCF_REG32(0xFC070008) +#define MCF_DTIM0_DTCN MCF_REG32(0xFC07000C) +#define MCF_DTIM1_DTMR MCF_REG16(0xFC074000) +#define MCF_DTIM1_DTXMR MCF_REG08(0xFC074002) +#define MCF_DTIM1_DTER MCF_REG08(0xFC074003) +#define MCF_DTIM1_DTRR MCF_REG32(0xFC074004) +#define MCF_DTIM1_DTCR MCF_REG32(0xFC074008) +#define MCF_DTIM1_DTCN MCF_REG32(0xFC07400C) +#define MCF_DTIM2_DTMR MCF_REG16(0xFC078000) +#define MCF_DTIM2_DTXMR MCF_REG08(0xFC078002) +#define MCF_DTIM2_DTER MCF_REG08(0xFC078003) +#define MCF_DTIM2_DTRR MCF_REG32(0xFC078004) +#define MCF_DTIM2_DTCR MCF_REG32(0xFC078008) +#define MCF_DTIM2_DTCN MCF_REG32(0xFC07800C) +#define MCF_DTIM3_DTMR MCF_REG16(0xFC07C000) +#define MCF_DTIM3_DTXMR MCF_REG08(0xFC07C002) +#define MCF_DTIM3_DTER MCF_REG08(0xFC07C003) +#define MCF_DTIM3_DTRR MCF_REG32(0xFC07C004) +#define MCF_DTIM3_DTCR MCF_REG32(0xFC07C008) +#define MCF_DTIM3_DTCN MCF_REG32(0xFC07C00C) +#define MCF_DTIM_DTMR(x) MCF_REG16(0xFC070000+((x)*0x4000)) +#define MCF_DTIM_DTXMR(x) MCF_REG08(0xFC070002+((x)*0x4000)) +#define MCF_DTIM_DTER(x) MCF_REG08(0xFC070003+((x)*0x4000)) +#define MCF_DTIM_DTRR(x) MCF_REG32(0xFC070004+((x)*0x4000)) +#define MCF_DTIM_DTCR(x) MCF_REG32(0xFC070008+((x)*0x4000)) +#define MCF_DTIM_DTCN(x) MCF_REG32(0xFC07000C+((x)*0x4000)) + +/* Bit definitions and macros for MCF_DTIM_DTMR */ +#define MCF_DTIM_DTMR_RST (0x0001) +#define MCF_DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) +#define MCF_DTIM_DTMR_FRR (0x0008) +#define MCF_DTIM_DTMR_ORRI (0x0010) +#define MCF_DTIM_DTMR_OM (0x0020) +#define MCF_DTIM_DTMR_CE(x) (((x)&0x0003)<<6) +#define MCF_DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) +#define MCF_DTIM_DTMR_CE_ANY (0x00C0) +#define MCF_DTIM_DTMR_CE_FALL (0x0080) +#define MCF_DTIM_DTMR_CE_RISE (0x0040) +#define MCF_DTIM_DTMR_CE_NONE (0x0000) +#define MCF_DTIM_DTMR_CLK_DTIN (0x0006) +#define MCF_DTIM_DTMR_CLK_DIV16 (0x0004) +#define MCF_DTIM_DTMR_CLK_DIV1 (0x0002) +#define MCF_DTIM_DTMR_CLK_STOP (0x0000) + +/* Bit definitions and macros for MCF_DTIM_DTXMR */ +#define MCF_DTIM_DTXMR_MODE16 (0x01) +#define MCF_DTIM_DTXMR_DMAEN (0x80) + +/* Bit definitions and macros for MCF_DTIM_DTER */ +#define MCF_DTIM_DTER_CAP (0x01) +#define MCF_DTIM_DTER_REF (0x02) + +/* Bit definitions and macros for MCF_DTIM_DTRR */ +#define MCF_DTIM_DTRR_REF(x) (((x)&0xFFFFFFFF)<<0) + +/* Bit definitions and macros for MCF_DTIM_DTCR */ +#define MCF_DTIM_DTCR_CAP(x) (((x)&0xFFFFFFFF)<<0) + +/* Bit definitions and macros for MCF_DTIM_DTCN */ +#define MCF_DTIM_DTCN_CNT(x) (((x)&0xFFFFFFFF)<<0) + +/********************************************************************* + * + * FlexBus Chip Selects (FBCS) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_FBCS0_CSAR MCF_REG32(0xFC008000) +#define MCF_FBCS0_CSMR MCF_REG32(0xFC008004) +#define MCF_FBCS0_CSCR MCF_REG32(0xFC008008) +#define MCF_FBCS1_CSAR MCF_REG32(0xFC00800C) +#define MCF_FBCS1_CSMR MCF_REG32(0xFC008010) +#define MCF_FBCS1_CSCR MCF_REG32(0xFC008014) +#define MCF_FBCS2_CSAR MCF_REG32(0xFC008018) +#define MCF_FBCS2_CSMR MCF_REG32(0xFC00801C) +#define MCF_FBCS2_CSCR MCF_REG32(0xFC008020) +#define MCF_FBCS3_CSAR MCF_REG32(0xFC008024) +#define MCF_FBCS3_CSMR MCF_REG32(0xFC008028) +#define MCF_FBCS3_CSCR MCF_REG32(0xFC00802C) +#define MCF_FBCS4_CSAR MCF_REG32(0xFC008030) +#define MCF_FBCS4_CSMR MCF_REG32(0xFC008034) +#define MCF_FBCS4_CSCR MCF_REG32(0xFC008038) +#define MCF_FBCS5_CSAR MCF_REG32(0xFC00803C) +#define MCF_FBCS5_CSMR MCF_REG32(0xFC008040) +#define MCF_FBCS5_CSCR MCF_REG32(0xFC008044) +#define MCF_FBCS_CSAR(x) MCF_REG32(0xFC008000+((x)*0x00C)) +#define MCF_FBCS_CSMR(x) MCF_REG32(0xFC008004+((x)*0x00C)) +#define MCF_FBCS_CSCR(x) MCF_REG32(0xFC008008+((x)*0x00C)) + +/* Bit definitions and macros for MCF_FBCS_CSAR */ +#define MCF_FBCS_CSAR_BA(x) ((x)&0xFFFF0000) + +/* Bit definitions and macros for MCF_FBCS_CSMR */ +#define MCF_FBCS_CSMR_V (0x00000001) +#define MCF_FBCS_CSMR_WP (0x00000100) +#define MCF_FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) +#define MCF_FBCS_CSMR_BAM_4G (0xFFFF0000) +#define MCF_FBCS_CSMR_BAM_2G (0x7FFF0000) +#define MCF_FBCS_CSMR_BAM_1G (0x3FFF0000) +#define MCF_FBCS_CSMR_BAM_1024M (0x3FFF0000) +#define MCF_FBCS_CSMR_BAM_512M (0x1FFF0000) +#define MCF_FBCS_CSMR_BAM_256M (0x0FFF0000) +#define MCF_FBCS_CSMR_BAM_128M (0x07FF0000) +#define MCF_FBCS_CSMR_BAM_64M (0x03FF0000) +#define MCF_FBCS_CSMR_BAM_32M (0x01FF0000) +#define MCF_FBCS_CSMR_BAM_16M (0x00FF0000) +#define MCF_FBCS_CSMR_BAM_8M (0x007F0000) +#define MCF_FBCS_CSMR_BAM_4M (0x003F0000) +#define MCF_FBCS_CSMR_BAM_2M (0x001F0000) +#define MCF_FBCS_CSMR_BAM_1M (0x000F0000) +#define MCF_FBCS_CSMR_BAM_1024K (0x000F0000) +#define MCF_FBCS_CSMR_BAM_512K (0x00070000) +#define MCF_FBCS_CSMR_BAM_256K (0x00030000) +#define MCF_FBCS_CSMR_BAM_128K (0x00010000) +#define MCF_FBCS_CSMR_BAM_64K (0x00000000) + +/* Bit definitions and macros for MCF_FBCS_CSCR */ +#define MCF_FBCS_CSCR_BSTW (0x00000008) +#define MCF_FBCS_CSCR_BSTR (0x00000010) +#define MCF_FBCS_CSCR_BEM (0x00000020) +#define MCF_FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) +#define MCF_FBCS_CSCR_AA (0x00000100) +#define MCF_FBCS_CSCR_SBM (0x00000200) +#define MCF_FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) +#define MCF_FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16) +#define MCF_FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18) +#define MCF_FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) +#define MCF_FBCS_CSCR_SWSEN (0x00800000) +#define MCF_FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26) +#define MCF_FBCS_CSCR_PS_8 (0x0040) +#define MCF_FBCS_CSCR_PS_16 (0x0080) +#define MCF_FBCS_CSCR_PS_32 (0x0000) + +/********************************************************************* + * + * General Purpose I/O (GPIO) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_GPIO_PODR_FECH MCF_REG08(0xFC0A4000) +#define MCF_GPIO_PODR_FECL MCF_REG08(0xFC0A4001) +#define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002) +#define MCF_GPIO_PODR_BUSCTL MCF_REG08(0xFC0A4003) +#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004) +#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005) +#define MCF_GPIO_PODR_PWM MCF_REG08(0xFC0A4006) +#define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007) +#define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009) +#define MCF_GPIO_PODR_QSPI MCF_REG08(0xFC0A400A) +#define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B) +#define MCF_GPIO_PODR_LCDDATAH MCF_REG08(0xFC0A400D) +#define MCF_GPIO_PODR_LCDDATAM MCF_REG08(0xFC0A400E) +#define MCF_GPIO_PODR_LCDDATAL MCF_REG08(0xFC0A400F) +#define MCF_GPIO_PODR_LCDCTLH MCF_REG08(0xFC0A4010) +#define MCF_GPIO_PODR_LCDCTLL MCF_REG08(0xFC0A4011) +#define MCF_GPIO_PDDR_FECH MCF_REG08(0xFC0A4014) +#define MCF_GPIO_PDDR_FECL MCF_REG08(0xFC0A4015) +#define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A4016) +#define MCF_GPIO_PDDR_BUSCTL MCF_REG08(0xFC0A4017) +#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A4018) +#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A4019) +#define MCF_GPIO_PDDR_PWM MCF_REG08(0xFC0A401A) +#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401B) +#define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A401C) +#define MCF_GPIO_PDDR_QSPI MCF_REG08(0xFC0A401E) +#define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A401F) +#define MCF_GPIO_PDDR_LCDDATAH MCF_REG08(0xFC0A4021) +#define MCF_GPIO_PDDR_LCDDATAM MCF_REG08(0xFC0A4022) +#define MCF_GPIO_PDDR_LCDDATAL MCF_REG08(0xFC0A4023) +#define MCF_GPIO_PDDR_LCDCTLH MCF_REG08(0xFC0A4024) +#define MCF_GPIO_PDDR_LCDCTLL MCF_REG08(0xFC0A4025) +#define MCF_GPIO_PPDSDR_FECH MCF_REG08(0xFC0A4028) +#define MCF_GPIO_PPDSDR_FECL MCF_REG08(0xFC0A4029) +#define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A402A) +#define MCF_GPIO_PPDSDR_BUSCTL MCF_REG08(0xFC0A402B) +#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A402C) +#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A402D) +#define MCF_GPIO_PPDSDR_PWM MCF_REG08(0xFC0A402E) +#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A402F) +#define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4031) +#define MCF_GPIO_PPDSDR_QSPI MCF_REG08(0xFC0A4032) +#define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A4033) +#define MCF_GPIO_PPDSDR_LCDDATAH MCF_REG08(0xFC0A4035) +#define MCF_GPIO_PPDSDR_LCDDATAM MCF_REG08(0xFC0A4036) +#define MCF_GPIO_PPDSDR_LCDDATAL MCF_REG08(0xFC0A4037) +#define MCF_GPIO_PPDSDR_LCDCTLH MCF_REG08(0xFC0A4038) +#define MCF_GPIO_PPDSDR_LCDCTLL MCF_REG08(0xFC0A4039) +#define MCF_GPIO_PCLRR_FECH MCF_REG08(0xFC0A403C) +#define MCF_GPIO_PCLRR_FECL MCF_REG08(0xFC0A403D) +#define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A403E) +#define MCF_GPIO_PCLRR_BUSCTL MCF_REG08(0xFC0A403F) +#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A4040) +#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A4041) +#define MCF_GPIO_PCLRR_PWM MCF_REG08(0xFC0A4042) +#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A4043) +#define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4045) +#define MCF_GPIO_PCLRR_QSPI MCF_REG08(0xFC0A4046) +#define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4047) +#define MCF_GPIO_PCLRR_LCDDATAH MCF_REG08(0xFC0A4049) +#define MCF_GPIO_PCLRR_LCDDATAM MCF_REG08(0xFC0A404A) +#define MCF_GPIO_PCLRR_LCDDATAL MCF_REG08(0xFC0A404B) +#define MCF_GPIO_PCLRR_LCDCTLH MCF_REG08(0xFC0A404C) +#define MCF_GPIO_PCLRR_LCDCTLL MCF_REG08(0xFC0A404D) +#define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050) +#define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051) +#define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052) +#define MCF_GPIO_PAR_FECI2C MCF_REG08(0xFC0A4053) +#define MCF_GPIO_PAR_BE MCF_REG08(0xFC0A4054) +#define MCF_GPIO_PAR_CS MCF_REG08(0xFC0A4055) +#define MCF_GPIO_PAR_SSI MCF_REG16(0xFC0A4056) +#define MCF_GPIO_PAR_UART MCF_REG16(0xFC0A4058) +#define MCF_GPIO_PAR_QSPI MCF_REG16(0xFC0A405A) +#define MCF_GPIO_PAR_TIMER MCF_REG08(0xFC0A405C) +#define MCF_GPIO_PAR_LCDDATA MCF_REG08(0xFC0A405D) +#define MCF_GPIO_PAR_LCDCTL MCF_REG16(0xFC0A405E) +#define MCF_GPIO_PAR_IRQ MCF_REG16(0xFC0A4060) +#define MCF_GPIO_MSCR_FLEXBUS MCF_REG08(0xFC0A4064) +#define MCF_GPIO_MSCR_SDRAM MCF_REG08(0xFC0A4065) +#define MCF_GPIO_DSCR_I2C MCF_REG08(0xFC0A4068) +#define MCF_GPIO_DSCR_PWM MCF_REG08(0xFC0A4069) +#define MCF_GPIO_DSCR_FEC MCF_REG08(0xFC0A406A) +#define MCF_GPIO_DSCR_UART MCF_REG08(0xFC0A406B) +#define MCF_GPIO_DSCR_QSPI MCF_REG08(0xFC0A406C) +#define MCF_GPIO_DSCR_TIMER MCF_REG08(0xFC0A406D) +#define MCF_GPIO_DSCR_SSI MCF_REG08(0xFC0A406E) +#define MCF_GPIO_DSCR_LCD MCF_REG08(0xFC0A406F) +#define MCF_GPIO_DSCR_DEBUG MCF_REG08(0xFC0A4070) +#define MCF_GPIO_DSCR_CLKRST MCF_REG08(0xFC0A4071) +#define MCF_GPIO_DSCR_IRQ MCF_REG08(0xFC0A4072) + +/* Bit definitions and macros for MCF_GPIO_PODR_FECH */ +#define MCF_GPIO_PODR_FECH_PODR_FECH0 (0x01) +#define MCF_GPIO_PODR_FECH_PODR_FECH1 (0x02) +#define MCF_GPIO_PODR_FECH_PODR_FECH2 (0x04) +#define MCF_GPIO_PODR_FECH_PODR_FECH3 (0x08) +#define MCF_GPIO_PODR_FECH_PODR_FECH4 (0x10) +#define MCF_GPIO_PODR_FECH_PODR_FECH5 (0x20) +#define MCF_GPIO_PODR_FECH_PODR_FECH6 (0x40) +#define MCF_GPIO_PODR_FECH_PODR_FECH7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PODR_FECL */ +#define MCF_GPIO_PODR_FECL_PODR_FECL0 (0x01) +#define MCF_GPIO_PODR_FECL_PODR_FECL1 (0x02) +#define MCF_GPIO_PODR_FECL_PODR_FECL2 (0x04) +#define MCF_GPIO_PODR_FECL_PODR_FECL3 (0x08) +#define MCF_GPIO_PODR_FECL_PODR_FECL4 (0x10) +#define MCF_GPIO_PODR_FECL_PODR_FECL5 (0x20) +#define MCF_GPIO_PODR_FECL_PODR_FECL6 (0x40) +#define MCF_GPIO_PODR_FECL_PODR_FECL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PODR_SSI */ +#define MCF_GPIO_PODR_SSI_PODR_SSI0 (0x01) +#define MCF_GPIO_PODR_SSI_PODR_SSI1 (0x02) +#define MCF_GPIO_PODR_SSI_PODR_SSI2 (0x04) +#define MCF_GPIO_PODR_SSI_PODR_SSI3 (0x08) +#define MCF_GPIO_PODR_SSI_PODR_SSI4 (0x10) + +/* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */ +#define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0 (0x01) +#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1 (0x02) +#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2 (0x04) +#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PODR_BE */ +#define MCF_GPIO_PODR_BE_PODR_BE0 (0x01) +#define MCF_GPIO_PODR_BE_PODR_BE1 (0x02) +#define MCF_GPIO_PODR_BE_PODR_BE2 (0x04) +#define MCF_GPIO_PODR_BE_PODR_BE3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PODR_CS */ +#define MCF_GPIO_PODR_CS_PODR_CS1 (0x02) +#define MCF_GPIO_PODR_CS_PODR_CS2 (0x04) +#define MCF_GPIO_PODR_CS_PODR_CS3 (0x08) +#define MCF_GPIO_PODR_CS_PODR_CS4 (0x10) +#define MCF_GPIO_PODR_CS_PODR_CS5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PODR_PWM */ +#define MCF_GPIO_PODR_PWM_PODR_PWM2 (0x04) +#define MCF_GPIO_PODR_PWM_PODR_PWM3 (0x08) +#define MCF_GPIO_PODR_PWM_PODR_PWM4 (0x10) +#define MCF_GPIO_PODR_PWM_PODR_PWM5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */ +#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0 (0x01) +#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1 (0x02) +#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2 (0x04) +#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PODR_UART */ +#define MCF_GPIO_PODR_UART_PODR_UART0 (0x01) +#define MCF_GPIO_PODR_UART_PODR_UART1 (0x02) +#define MCF_GPIO_PODR_UART_PODR_UART2 (0x04) +#define MCF_GPIO_PODR_UART_PODR_UART3 (0x08) +#define MCF_GPIO_PODR_UART_PODR_UART4 (0x10) +#define MCF_GPIO_PODR_UART_PODR_UART5 (0x20) +#define MCF_GPIO_PODR_UART_PODR_UART6 (0x40) +#define MCF_GPIO_PODR_UART_PODR_UART7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PODR_QSPI */ +#define MCF_GPIO_PODR_QSPI_PODR_QSPI0 (0x01) +#define MCF_GPIO_PODR_QSPI_PODR_QSPI1 (0x02) +#define MCF_GPIO_PODR_QSPI_PODR_QSPI2 (0x04) +#define MCF_GPIO_PODR_QSPI_PODR_QSPI3 (0x08) +#define MCF_GPIO_PODR_QSPI_PODR_QSPI4 (0x10) +#define MCF_GPIO_PODR_QSPI_PODR_QSPI5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PODR_TIMER */ +#define MCF_GPIO_PODR_TIMER_PODR_TIMER0 (0x01) +#define MCF_GPIO_PODR_TIMER_PODR_TIMER1 (0x02) +#define MCF_GPIO_PODR_TIMER_PODR_TIMER2 (0x04) +#define MCF_GPIO_PODR_TIMER_PODR_TIMER3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */ +#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0 (0x01) +#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1 (0x02) + +/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */ +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0 (0x01) +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1 (0x02) +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2 (0x04) +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3 (0x08) +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4 (0x10) +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5 (0x20) +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6 (0x40) +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */ +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0 (0x01) +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1 (0x02) +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2 (0x04) +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3 (0x08) +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4 (0x10) +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5 (0x20) +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6 (0x40) +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */ +#define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0 (0x01) + +/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */ +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0 (0x01) +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1 (0x02) +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2 (0x04) +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3 (0x08) +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4 (0x10) +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5 (0x20) +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6 (0x40) +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PDDR_FECH */ +#define MCF_GPIO_PDDR_FECH_PDDR_FECH0 (0x01) +#define MCF_GPIO_PDDR_FECH_PDDR_FECH1 (0x02) +#define MCF_GPIO_PDDR_FECH_PDDR_FECH2 (0x04) +#define MCF_GPIO_PDDR_FECH_PDDR_FECH3 (0x08) +#define MCF_GPIO_PDDR_FECH_PDDR_FECH4 (0x10) +#define MCF_GPIO_PDDR_FECH_PDDR_FECH5 (0x20) +#define MCF_GPIO_PDDR_FECH_PDDR_FECH6 (0x40) +#define MCF_GPIO_PDDR_FECH_PDDR_FECH7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PDDR_FECL */ +#define MCF_GPIO_PDDR_FECL_PDDR_FECL0 (0x01) +#define MCF_GPIO_PDDR_FECL_PDDR_FECL1 (0x02) +#define MCF_GPIO_PDDR_FECL_PDDR_FECL2 (0x04) +#define MCF_GPIO_PDDR_FECL_PDDR_FECL3 (0x08) +#define MCF_GPIO_PDDR_FECL_PDDR_FECL4 (0x10) +#define MCF_GPIO_PDDR_FECL_PDDR_FECL5 (0x20) +#define MCF_GPIO_PDDR_FECL_PDDR_FECL6 (0x40) +#define MCF_GPIO_PDDR_FECL_PDDR_FECL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PDDR_SSI */ +#define MCF_GPIO_PDDR_SSI_PDDR_SSI0 (0x01) +#define MCF_GPIO_PDDR_SSI_PDDR_SSI1 (0x02) +#define MCF_GPIO_PDDR_SSI_PDDR_SSI2 (0x04) +#define MCF_GPIO_PDDR_SSI_PDDR_SSI3 (0x08) +#define MCF_GPIO_PDDR_SSI_PDDR_SSI4 (0x10) + +/* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */ +#define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0 (0x01) +#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1 (0x02) +#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2 (0x04) +#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PDDR_BE */ +#define MCF_GPIO_PDDR_BE_PDDR_BE0 (0x01) +#define MCF_GPIO_PDDR_BE_PDDR_BE1 (0x02) +#define MCF_GPIO_PDDR_BE_PDDR_BE2 (0x04) +#define MCF_GPIO_PDDR_BE_PDDR_BE3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PDDR_CS */ +#define MCF_GPIO_PDDR_CS_PDDR_CS1 (0x02) +#define MCF_GPIO_PDDR_CS_PDDR_CS2 (0x04) +#define MCF_GPIO_PDDR_CS_PDDR_CS3 (0x08) +#define MCF_GPIO_PDDR_CS_PDDR_CS4 (0x10) +#define MCF_GPIO_PDDR_CS_PDDR_CS5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PDDR_PWM */ +#define MCF_GPIO_PDDR_PWM_PDDR_PWM2 (0x04) +#define MCF_GPIO_PDDR_PWM_PDDR_PWM3 (0x08) +#define MCF_GPIO_PDDR_PWM_PDDR_PWM4 (0x10) +#define MCF_GPIO_PDDR_PWM_PDDR_PWM5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */ +#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0 (0x01) +#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1 (0x02) +#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2 (0x04) +#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PDDR_UART */ +#define MCF_GPIO_PDDR_UART_PDDR_UART0 (0x01) +#define MCF_GPIO_PDDR_UART_PDDR_UART1 (0x02) +#define MCF_GPIO_PDDR_UART_PDDR_UART2 (0x04) +#define MCF_GPIO_PDDR_UART_PDDR_UART3 (0x08) +#define MCF_GPIO_PDDR_UART_PDDR_UART4 (0x10) +#define MCF_GPIO_PDDR_UART_PDDR_UART5 (0x20) +#define MCF_GPIO_PDDR_UART_PDDR_UART6 (0x40) +#define MCF_GPIO_PDDR_UART_PDDR_UART7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */ +#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0 (0x01) +#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1 (0x02) +#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2 (0x04) +#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3 (0x08) +#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4 (0x10) +#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */ +#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0 (0x01) +#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1 (0x02) +#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2 (0x04) +#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */ +#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0 (0x01) +#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1 (0x02) + +/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */ +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0 (0x01) +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1 (0x02) +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2 (0x04) +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3 (0x08) +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4 (0x10) +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5 (0x20) +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6 (0x40) +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */ +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0 (0x01) +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1 (0x02) +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2 (0x04) +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3 (0x08) +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4 (0x10) +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5 (0x20) +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6 (0x40) +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */ +#define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0 (0x01) + +/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */ +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0 (0x01) +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1 (0x02) +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2 (0x04) +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3 (0x08) +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4 (0x10) +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5 (0x20) +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6 (0x40) +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */ +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0 (0x01) +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1 (0x02) +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2 (0x04) +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3 (0x08) +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4 (0x10) +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5 (0x20) +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6 (0x40) +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */ +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0 (0x01) +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1 (0x02) +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2 (0x04) +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3 (0x08) +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4 (0x10) +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5 (0x20) +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6 (0x40) +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */ +#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0 (0x01) +#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1 (0x02) +#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2 (0x04) +#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3 (0x08) +#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4 (0x10) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */ +#define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0 (0x01) +#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1 (0x02) +#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2 (0x04) +#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */ +#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0 (0x01) +#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1 (0x02) +#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2 (0x04) +#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */ +#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1 (0x02) +#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2 (0x04) +#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3 (0x08) +#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4 (0x10) +#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */ +#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2 (0x04) +#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3 (0x08) +#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4 (0x10) +#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */ +#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0 (0x01) +#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1 (0x02) +#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2 (0x04) +#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */ +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0 (0x01) +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1 (0x02) +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2 (0x04) +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3 (0x08) +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4 (0x10) +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5 (0x20) +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6 (0x40) +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */ +#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0 (0x01) +#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1 (0x02) +#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2 (0x04) +#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3 (0x08) +#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4 (0x10) +#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */ +#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0 (0x01) +#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1 (0x02) +#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2 (0x04) +#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */ +#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0 (0x01) +#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1 (0x02) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */ +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0 (0x01) +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1 (0x02) +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2 (0x04) +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3 (0x08) +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4 (0x10) +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5 (0x20) +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6 (0x40) +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */ +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0 (0x01) +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1 (0x02) +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2 (0x04) +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3 (0x08) +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4 (0x10) +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5 (0x20) +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6 (0x40) +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */ +#define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0 (0x01) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */ +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0 (0x01) +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1 (0x02) +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2 (0x04) +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3 (0x08) +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4 (0x10) +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5 (0x20) +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6 (0x40) +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */ +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0 (0x01) +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1 (0x02) +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2 (0x04) +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3 (0x08) +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4 (0x10) +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5 (0x20) +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6 (0x40) +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */ +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0 (0x01) +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1 (0x02) +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2 (0x04) +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3 (0x08) +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4 (0x10) +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5 (0x20) +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6 (0x40) +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */ +#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0 (0x01) +#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1 (0x02) +#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2 (0x04) +#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3 (0x08) +#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4 (0x10) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */ +#define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0 (0x01) +#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1 (0x02) +#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2 (0x04) +#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_BE */ +#define MCF_GPIO_PCLRR_BE_PCLRR_BE0 (0x01) +#define MCF_GPIO_PCLRR_BE_PCLRR_BE1 (0x02) +#define MCF_GPIO_PCLRR_BE_PCLRR_BE2 (0x04) +#define MCF_GPIO_PCLRR_BE_PCLRR_BE3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_CS */ +#define MCF_GPIO_PCLRR_CS_PCLRR_CS1 (0x02) +#define MCF_GPIO_PCLRR_CS_PCLRR_CS2 (0x04) +#define MCF_GPIO_PCLRR_CS_PCLRR_CS3 (0x08) +#define MCF_GPIO_PCLRR_CS_PCLRR_CS4 (0x10) +#define MCF_GPIO_PCLRR_CS_PCLRR_CS5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */ +#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2 (0x04) +#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3 (0x08) +#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4 (0x10) +#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */ +#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0 (0x01) +#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1 (0x02) +#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2 (0x04) +#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_UART */ +#define MCF_GPIO_PCLRR_UART_PCLRR_UART0 (0x01) +#define MCF_GPIO_PCLRR_UART_PCLRR_UART1 (0x02) +#define MCF_GPIO_PCLRR_UART_PCLRR_UART2 (0x04) +#define MCF_GPIO_PCLRR_UART_PCLRR_UART3 (0x08) +#define MCF_GPIO_PCLRR_UART_PCLRR_UART4 (0x10) +#define MCF_GPIO_PCLRR_UART_PCLRR_UART5 (0x20) +#define MCF_GPIO_PCLRR_UART_PCLRR_UART6 (0x40) +#define MCF_GPIO_PCLRR_UART_PCLRR_UART7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */ +#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0 (0x01) +#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1 (0x02) +#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2 (0x04) +#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3 (0x08) +#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4 (0x10) +#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */ +#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0 (0x01) +#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1 (0x02) +#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2 (0x04) +#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */ +#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0 (0x01) +#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1 (0x02) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */ +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0 (0x01) +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1 (0x02) +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2 (0x04) +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3 (0x08) +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4 (0x10) +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5 (0x20) +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6 (0x40) +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */ +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0 (0x01) +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1 (0x02) +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2 (0x04) +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3 (0x08) +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4 (0x10) +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5 (0x20) +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6 (0x40) +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */ +#define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0 (0x01) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */ +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0 (0x01) +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1 (0x02) +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2 (0x04) +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3 (0x08) +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4 (0x10) +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5 (0x20) +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6 (0x40) +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PAR_FEC */ +#define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x) (((x)&0x03)<<0) +#define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x) (((x)&0x03)<<2) +#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO (0x00) +#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1 (0x04) +#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC (0x0C) +#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO (0x00) +#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART (0x01) +#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC (0x03) + +/* Bit definitions and macros for MCF_GPIO_PAR_PWM */ +#define MCF_GPIO_PAR_PWM_PAR_PWM1(x) (((x)&0x03)<<0) +#define MCF_GPIO_PAR_PWM_PAR_PWM3(x) (((x)&0x03)<<2) +#define MCF_GPIO_PAR_PWM_PAR_PWM5 (0x10) +#define MCF_GPIO_PAR_PWM_PAR_PWM7 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */ +#define MCF_GPIO_PAR_BUSCTL_PAR_TS(x) (((x)&0x03)<<3) +#define MCF_GPIO_PAR_BUSCTL_PAR_RWB (0x20) +#define MCF_GPIO_PAR_BUSCTL_PAR_TA (0x40) +#define MCF_GPIO_PAR_BUSCTL_PAR_OE (0x80) +#define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO (0x00) +#define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE (0x80) +#define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO (0x00) +#define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA (0x40) +#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO (0x00) +#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB (0x20) +#define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO (0x00) +#define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0 (0x10) +#define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS (0x18) + +/* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */ +#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x) (((x)&0x03)<<0) +#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x) (((x)&0x03)<<2) +#define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x) (((x)&0x03)<<4) +#define MCF_GPIO_PAR_FECI2C_PAR_MDC(x) (((x)&0x03)<<6) +#define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO (0x00) +#define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2 (0x40) +#define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL (0x80) +#define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC (0xC0) +#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO (0x00) +#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2 (0x10) +#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA (0x20) +#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO (0x30) +#define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO (0x00) +#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) +#define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL (0x0C) +#define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO (0x00) +#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) +#define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA (0x03) + +/* Bit definitions and macros for MCF_GPIO_PAR_BE */ +#define MCF_GPIO_PAR_BE_PAR_BE0 (0x01) +#define MCF_GPIO_PAR_BE_PAR_BE1 (0x02) +#define MCF_GPIO_PAR_BE_PAR_BE2 (0x04) +#define MCF_GPIO_PAR_BE_PAR_BE3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PAR_CS */ +#define MCF_GPIO_PAR_CS_PAR_CS1 (0x02) +#define MCF_GPIO_PAR_CS_PAR_CS2 (0x04) +#define MCF_GPIO_PAR_CS_PAR_CS3 (0x08) +#define MCF_GPIO_PAR_CS_PAR_CS4 (0x10) +#define MCF_GPIO_PAR_CS_PAR_CS5 (0x20) +#define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO (0x00) +#define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1 (0x01) +#define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1 (0x03) + +/* Bit definitions and macros for MCF_GPIO_PAR_SSI */ +#define MCF_GPIO_PAR_SSI_PAR_MCLK (0x0080) +#define MCF_GPIO_PAR_SSI_PAR_TXD(x) (((x)&0x0003)<<8) +#define MCF_GPIO_PAR_SSI_PAR_RXD(x) (((x)&0x0003)<<10) +#define MCF_GPIO_PAR_SSI_PAR_FS(x) (((x)&0x0003)<<12) +#define MCF_GPIO_PAR_SSI_PAR_BCLK(x) (((x)&0x0003)<<14) + +/* Bit definitions and macros for MCF_GPIO_PAR_UART */ +#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0001) +#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0002) +#define MCF_GPIO_PAR_UART_PAR_URTS0 (0x0004) +#define MCF_GPIO_PAR_UART_PAR_UCTS0 (0x0008) +#define MCF_GPIO_PAR_UART_PAR_UTXD1(x) (((x)&0x0003)<<4) +#define MCF_GPIO_PAR_UART_PAR_URXD1(x) (((x)&0x0003)<<6) +#define MCF_GPIO_PAR_UART_PAR_URTS1(x) (((x)&0x0003)<<8) +#define MCF_GPIO_PAR_UART_PAR_UCTS1(x) (((x)&0x0003)<<10) +#define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO (0x0000) +#define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK (0x0800) +#define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7 (0x0400) +#define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1 (0x0C00) +#define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO (0x0000) +#define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS (0x0200) +#define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6 (0x0100) +#define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1 (0x0300) +#define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO (0x0000) +#define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD (0x0080) +#define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5 (0x0040) +#define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1 (0x00C0) +#define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO (0x0000) +#define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD (0x0020) +#define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4 (0x0010) +#define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1 (0x0030) + +/* Bit definitions and macros for MCF_GPIO_PAR_QSPI */ +#define MCF_GPIO_PAR_QSPI_PAR_SCK(x) (((x)&0x0003)<<4) +#define MCF_GPIO_PAR_QSPI_PAR_DOUT(x) (((x)&0x0003)<<6) +#define MCF_GPIO_PAR_QSPI_PAR_DIN(x) (((x)&0x0003)<<8) +#define MCF_GPIO_PAR_QSPI_PAR_PCS0(x) (((x)&0x0003)<<10) +#define MCF_GPIO_PAR_QSPI_PAR_PCS1(x) (((x)&0x0003)<<12) +#define MCF_GPIO_PAR_QSPI_PAR_PCS2(x) (((x)&0x0003)<<14) + +/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */ +#define MCF_GPIO_PAR_TIMER_PAR_TIN0(x) (((x)&0x03)<<0) +#define MCF_GPIO_PAR_TIMER_PAR_TIN1(x) (((x)&0x03)<<2) +#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x) (((x)&0x03)<<4) +#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x) (((x)&0x03)<<6) +#define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO (0x00) +#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3 (0x80) +#define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2 (0x40) +#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3 (0xC0) +#define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO (0x00) +#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2 (0x20) +#define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2 (0x10) +#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2 (0x30) +#define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO (0x00) +#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1 (0x08) +#define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1 (0x04) +#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1 (0x0C) +#define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO (0x00) +#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0 (0x02) +#define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0 (0x01) +#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0 (0x03) + +/* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */ +#define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x) (((x)&0x03)<<0) +#define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x) (((x)&0x03)<<2) +#define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x) (((x)&0x03)<<4) +#define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x) (((x)&0x03)<<6) + +/* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */ +#define MCF_GPIO_PAR_LCDCTL_PAR_CLS (0x0001) +#define MCF_GPIO_PAR_LCDCTL_PAR_PS (0x0002) +#define MCF_GPIO_PAR_LCDCTL_PAR_REV (0x0004) +#define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR (0x0008) +#define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST (0x0010) +#define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK (0x0020) +#define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC (0x0040) +#define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC (0x0080) +#define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE (0x0100) + +/* Bit definitions and macros for MCF_GPIO_PAR_IRQ */ +#define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x) (((x)&0x0003)<<4) +#define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x) (((x)&0x0003)<<6) +#define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x) (((x)&0x0003)<<8) +#define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x) (((x)&0x0003)<<10) +#define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x) (((x)&0x0003)<<12) + +/* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */ +#define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x) (((x)&0x03)<<0) +#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x) (((x)&0x03)<<2) +#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x) (((x)&0x03)<<4) + +/* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */ +#define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x) (((x)&0x03)<<0) +#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x) (((x)&0x03)<<2) +#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x) (((x)&0x03)<<4) + +/* Bit definitions and macros for MCF_GPIO_DSCR_I2C */ +#define MCF_GPIO_DSCR_I2C_I2C_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_PWM */ +#define MCF_GPIO_DSCR_PWM_PWM_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_FEC */ +#define MCF_GPIO_DSCR_FEC_FEC_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_UART */ +#define MCF_GPIO_DSCR_UART_UART0_DSE(x) (((x)&0x03)<<0) +#define MCF_GPIO_DSCR_UART_UART1_DSE(x) (((x)&0x03)<<2) + +/* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */ +#define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */ +#define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_SSI */ +#define MCF_GPIO_DSCR_SSI_SSI_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_LCD */ +#define MCF_GPIO_DSCR_LCD_LCD_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */ +#define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */ +#define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */ +#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x) (((x)&0x03)<<0) + +/********************************************************************* + * + * Interrupt Controller (INTC) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_INTC0_IPRH MCF_REG32(0xFC048000) +#define MCF_INTC0_IPRL MCF_REG32(0xFC048004) +#define MCF_INTC0_IMRH MCF_REG32(0xFC048008) +#define MCF_INTC0_IMRL MCF_REG32(0xFC04800C) +#define MCF_INTC0_INTFRCH MCF_REG32(0xFC048010) +#define MCF_INTC0_INTFRCL MCF_REG32(0xFC048014) +#define MCF_INTC0_ICONFIG MCF_REG16(0xFC04801A) +#define MCF_INTC0_SIMR MCF_REG08(0xFC04801C) +#define MCF_INTC0_CIMR MCF_REG08(0xFC04801D) +#define MCF_INTC0_CLMASK MCF_REG08(0xFC04801E) +#define MCF_INTC0_SLMASK MCF_REG08(0xFC04801F) +#define MCF_INTC0_ICR0 MCF_REG08(0xFC048040) +#define MCF_INTC0_ICR1 MCF_REG08(0xFC048041) +#define MCF_INTC0_ICR2 MCF_REG08(0xFC048042) +#define MCF_INTC0_ICR3 MCF_REG08(0xFC048043) +#define MCF_INTC0_ICR4 MCF_REG08(0xFC048044) +#define MCF_INTC0_ICR5 MCF_REG08(0xFC048045) +#define MCF_INTC0_ICR6 MCF_REG08(0xFC048046) +#define MCF_INTC0_ICR7 MCF_REG08(0xFC048047) +#define MCF_INTC0_ICR8 MCF_REG08(0xFC048048) +#define MCF_INTC0_ICR9 MCF_REG08(0xFC048049) +#define MCF_INTC0_ICR10 MCF_REG08(0xFC04804A) +#define MCF_INTC0_ICR11 MCF_REG08(0xFC04804B) +#define MCF_INTC0_ICR12 MCF_REG08(0xFC04804C) +#define MCF_INTC0_ICR13 MCF_REG08(0xFC04804D) +#define MCF_INTC0_ICR14 MCF_REG08(0xFC04804E) +#define MCF_INTC0_ICR15 MCF_REG08(0xFC04804F) +#define MCF_INTC0_ICR16 MCF_REG08(0xFC048050) +#define MCF_INTC0_ICR17 MCF_REG08(0xFC048051) +#define MCF_INTC0_ICR18 MCF_REG08(0xFC048052) +#define MCF_INTC0_ICR19 MCF_REG08(0xFC048053) +#define MCF_INTC0_ICR20 MCF_REG08(0xFC048054) +#define MCF_INTC0_ICR21 MCF_REG08(0xFC048055) +#define MCF_INTC0_ICR22 MCF_REG08(0xFC048056) +#define MCF_INTC0_ICR23 MCF_REG08(0xFC048057) +#define MCF_INTC0_ICR24 MCF_REG08(0xFC048058) +#define MCF_INTC0_ICR25 MCF_REG08(0xFC048059) +#define MCF_INTC0_ICR26 MCF_REG08(0xFC04805A) +#define MCF_INTC0_ICR27 MCF_REG08(0xFC04805B) +#define MCF_INTC0_ICR28 MCF_REG08(0xFC04805C) +#define MCF_INTC0_ICR29 MCF_REG08(0xFC04805D) +#define MCF_INTC0_ICR30 MCF_REG08(0xFC04805E) +#define MCF_INTC0_ICR31 MCF_REG08(0xFC04805F) +#define MCF_INTC0_ICR32 MCF_REG08(0xFC048060) +#define MCF_INTC0_ICR33 MCF_REG08(0xFC048061) +#define MCF_INTC0_ICR34 MCF_REG08(0xFC048062) +#define MCF_INTC0_ICR35 MCF_REG08(0xFC048063) +#define MCF_INTC0_ICR36 MCF_REG08(0xFC048064) +#define MCF_INTC0_ICR37 MCF_REG08(0xFC048065) +#define MCF_INTC0_ICR38 MCF_REG08(0xFC048066) +#define MCF_INTC0_ICR39 MCF_REG08(0xFC048067) +#define MCF_INTC0_ICR40 MCF_REG08(0xFC048068) +#define MCF_INTC0_ICR41 MCF_REG08(0xFC048069) +#define MCF_INTC0_ICR42 MCF_REG08(0xFC04806A) +#define MCF_INTC0_ICR43 MCF_REG08(0xFC04806B) +#define MCF_INTC0_ICR44 MCF_REG08(0xFC04806C) +#define MCF_INTC0_ICR45 MCF_REG08(0xFC04806D) +#define MCF_INTC0_ICR46 MCF_REG08(0xFC04806E) +#define MCF_INTC0_ICR47 MCF_REG08(0xFC04806F) +#define MCF_INTC0_ICR48 MCF_REG08(0xFC048070) +#define MCF_INTC0_ICR49 MCF_REG08(0xFC048071) +#define MCF_INTC0_ICR50 MCF_REG08(0xFC048072) +#define MCF_INTC0_ICR51 MCF_REG08(0xFC048073) +#define MCF_INTC0_ICR52 MCF_REG08(0xFC048074) +#define MCF_INTC0_ICR53 MCF_REG08(0xFC048075) +#define MCF_INTC0_ICR54 MCF_REG08(0xFC048076) +#define MCF_INTC0_ICR55 MCF_REG08(0xFC048077) +#define MCF_INTC0_ICR56 MCF_REG08(0xFC048078) +#define MCF_INTC0_ICR57 MCF_REG08(0xFC048079) +#define MCF_INTC0_ICR58 MCF_REG08(0xFC04807A) +#define MCF_INTC0_ICR59 MCF_REG08(0xFC04807B) +#define MCF_INTC0_ICR60 MCF_REG08(0xFC04807C) +#define MCF_INTC0_ICR61 MCF_REG08(0xFC04807D) +#define MCF_INTC0_ICR62 MCF_REG08(0xFC04807E) +#define MCF_INTC0_ICR63 MCF_REG08(0xFC04807F) +#define MCF_INTC0_ICR(x) MCF_REG08(0xFC048040+((x)*0x001)) +#define MCF_INTC0_SWIACK MCF_REG08(0xFC0480E0) +#define MCF_INTC0_L1IACK MCF_REG08(0xFC0480E4) +#define MCF_INTC0_L2IACK MCF_REG08(0xFC0480E8) +#define MCF_INTC0_L3IACK MCF_REG08(0xFC0480EC) +#define MCF_INTC0_L4IACK MCF_REG08(0xFC0480F0) +#define MCF_INTC0_L5IACK MCF_REG08(0xFC0480F4) +#define MCF_INTC0_L6IACK MCF_REG08(0xFC0480F8) +#define MCF_INTC0_L7IACK MCF_REG08(0xFC0480FC) +#define MCF_INTC0_LIACK(x) MCF_REG08(0xFC0480E4+((x)*0x004)) +#define MCF_INTC1_IPRH MCF_REG32(0xFC04C000) +#define MCF_INTC1_IPRL MCF_REG32(0xFC04C004) +#define MCF_INTC1_IMRH MCF_REG32(0xFC04C008) +#define MCF_INTC1_IMRL MCF_REG32(0xFC04C00C) +#define MCF_INTC1_INTFRCH MCF_REG32(0xFC04C010) +#define MCF_INTC1_INTFRCL MCF_REG32(0xFC04C014) +#define MCF_INTC1_ICONFIG MCF_REG16(0xFC04C01A) +#define MCF_INTC1_SIMR MCF_REG08(0xFC04C01C) +#define MCF_INTC1_CIMR MCF_REG08(0xFC04C01D) +#define MCF_INTC1_CLMASK MCF_REG08(0xFC04C01E) +#define MCF_INTC1_SLMASK MCF_REG08(0xFC04C01F) +#define MCF_INTC1_ICR0 MCF_REG08(0xFC04C040) +#define MCF_INTC1_ICR1 MCF_REG08(0xFC04C041) +#define MCF_INTC1_ICR2 MCF_REG08(0xFC04C042) +#define MCF_INTC1_ICR3 MCF_REG08(0xFC04C043) +#define MCF_INTC1_ICR4 MCF_REG08(0xFC04C044) +#define MCF_INTC1_ICR5 MCF_REG08(0xFC04C045) +#define MCF_INTC1_ICR6 MCF_REG08(0xFC04C046) +#define MCF_INTC1_ICR7 MCF_REG08(0xFC04C047) +#define MCF_INTC1_ICR8 MCF_REG08(0xFC04C048) +#define MCF_INTC1_ICR9 MCF_REG08(0xFC04C049) +#define MCF_INTC1_ICR10 MCF_REG08(0xFC04C04A) +#define MCF_INTC1_ICR11 MCF_REG08(0xFC04C04B) +#define MCF_INTC1_ICR12 MCF_REG08(0xFC04C04C) +#define MCF_INTC1_ICR13 MCF_REG08(0xFC04C04D) +#define MCF_INTC1_ICR14 MCF_REG08(0xFC04C04E) +#define MCF_INTC1_ICR15 MCF_REG08(0xFC04C04F) +#define MCF_INTC1_ICR16 MCF_REG08(0xFC04C050) +#define MCF_INTC1_ICR17 MCF_REG08(0xFC04C051) +#define MCF_INTC1_ICR18 MCF_REG08(0xFC04C052) +#define MCF_INTC1_ICR19 MCF_REG08(0xFC04C053) +#define MCF_INTC1_ICR20 MCF_REG08(0xFC04C054) +#define MCF_INTC1_ICR21 MCF_REG08(0xFC04C055) +#define MCF_INTC1_ICR22 MCF_REG08(0xFC04C056) +#define MCF_INTC1_ICR23 MCF_REG08(0xFC04C057) +#define MCF_INTC1_ICR24 MCF_REG08(0xFC04C058) +#define MCF_INTC1_ICR25 MCF_REG08(0xFC04C059) +#define MCF_INTC1_ICR26 MCF_REG08(0xFC04C05A) +#define MCF_INTC1_ICR27 MCF_REG08(0xFC04C05B) +#define MCF_INTC1_ICR28 MCF_REG08(0xFC04C05C) +#define MCF_INTC1_ICR29 MCF_REG08(0xFC04C05D) +#define MCF_INTC1_ICR30 MCF_REG08(0xFC04C05E) +#define MCF_INTC1_ICR31 MCF_REG08(0xFC04C05F) +#define MCF_INTC1_ICR32 MCF_REG08(0xFC04C060) +#define MCF_INTC1_ICR33 MCF_REG08(0xFC04C061) +#define MCF_INTC1_ICR34 MCF_REG08(0xFC04C062) +#define MCF_INTC1_ICR35 MCF_REG08(0xFC04C063) +#define MCF_INTC1_ICR36 MCF_REG08(0xFC04C064) +#define MCF_INTC1_ICR37 MCF_REG08(0xFC04C065) +#define MCF_INTC1_ICR38 MCF_REG08(0xFC04C066) +#define MCF_INTC1_ICR39 MCF_REG08(0xFC04C067) +#define MCF_INTC1_ICR40 MCF_REG08(0xFC04C068) +#define MCF_INTC1_ICR41 MCF_REG08(0xFC04C069) +#define MCF_INTC1_ICR42 MCF_REG08(0xFC04C06A) +#define MCF_INTC1_ICR43 MCF_REG08(0xFC04C06B) +#define MCF_INTC1_ICR44 MCF_REG08(0xFC04C06C) +#define MCF_INTC1_ICR45 MCF_REG08(0xFC04C06D) +#define MCF_INTC1_ICR46 MCF_REG08(0xFC04C06E) +#define MCF_INTC1_ICR47 MCF_REG08(0xFC04C06F) +#define MCF_INTC1_ICR48 MCF_REG08(0xFC04C070) +#define MCF_INTC1_ICR49 MCF_REG08(0xFC04C071) +#define MCF_INTC1_ICR50 MCF_REG08(0xFC04C072) +#define MCF_INTC1_ICR51 MCF_REG08(0xFC04C073) +#define MCF_INTC1_ICR52 MCF_REG08(0xFC04C074) +#define MCF_INTC1_ICR53 MCF_REG08(0xFC04C075) +#define MCF_INTC1_ICR54 MCF_REG08(0xFC04C076) +#define MCF_INTC1_ICR55 MCF_REG08(0xFC04C077) +#define MCF_INTC1_ICR56 MCF_REG08(0xFC04C078) +#define MCF_INTC1_ICR57 MCF_REG08(0xFC04C079) +#define MCF_INTC1_ICR58 MCF_REG08(0xFC04C07A) +#define MCF_INTC1_ICR59 MCF_REG08(0xFC04C07B) +#define MCF_INTC1_ICR60 MCF_REG08(0xFC04C07C) +#define MCF_INTC1_ICR61 MCF_REG08(0xFC04C07D) +#define MCF_INTC1_ICR62 MCF_REG08(0xFC04C07E) +#define MCF_INTC1_ICR63 MCF_REG08(0xFC04C07F) +#define MCF_INTC1_ICR(x) MCF_REG08(0xFC04C040+((x)*0x001)) +#define MCF_INTC1_SWIACK MCF_REG08(0xFC04C0E0) +#define MCF_INTC1_L1IACK MCF_REG08(0xFC04C0E4) +#define MCF_INTC1_L2IACK MCF_REG08(0xFC04C0E8) +#define MCF_INTC1_L3IACK MCF_REG08(0xFC04C0EC) +#define MCF_INTC1_L4IACK MCF_REG08(0xFC04C0F0) +#define MCF_INTC1_L5IACK MCF_REG08(0xFC04C0F4) +#define MCF_INTC1_L6IACK MCF_REG08(0xFC04C0F8) +#define MCF_INTC1_L7IACK MCF_REG08(0xFC04C0FC) +#define MCF_INTC1_LIACK(x) MCF_REG08(0xFC04C0E4+((x)*0x004)) +#define MCF_INTC_IPRH(x) MCF_REG32(0xFC048000+((x)*0x4000)) +#define MCF_INTC_IPRL(x) MCF_REG32(0xFC048004+((x)*0x4000)) +#define MCF_INTC_IMRH(x) MCF_REG32(0xFC048008+((x)*0x4000)) +#define MCF_INTC_IMRL(x) MCF_REG32(0xFC04800C+((x)*0x4000)) +#define MCF_INTC_INTFRCH(x) MCF_REG32(0xFC048010+((x)*0x4000)) +#define MCF_INTC_INTFRCL(x) MCF_REG32(0xFC048014+((x)*0x4000)) +#define MCF_INTC_ICONFIG(x) MCF_REG16(0xFC04801A+((x)*0x4000)) +#define MCF_INTC_SIMR(x) MCF_REG08(0xFC04801C+((x)*0x4000)) +#define MCF_INTC_CIMR(x) MCF_REG08(0xFC04801D+((x)*0x4000)) +#define MCF_INTC_CLMASK(x) MCF_REG08(0xFC04801E+((x)*0x4000)) +#define MCF_INTC_SLMASK(x) MCF_REG08(0xFC04801F+((x)*0x4000)) +#define MCF_INTC_ICR0(x) MCF_REG08(0xFC048040+((x)*0x4000)) +#define MCF_INTC_ICR1(x) MCF_REG08(0xFC048041+((x)*0x4000)) +#define MCF_INTC_ICR2(x) MCF_REG08(0xFC048042+((x)*0x4000)) +#define MCF_INTC_ICR3(x) MCF_REG08(0xFC048043+((x)*0x4000)) +#define MCF_INTC_ICR4(x) MCF_REG08(0xFC048044+((x)*0x4000)) +#define MCF_INTC_ICR5(x) MCF_REG08(0xFC048045+((x)*0x4000)) +#define MCF_INTC_ICR6(x) MCF_REG08(0xFC048046+((x)*0x4000)) +#define MCF_INTC_ICR7(x) MCF_REG08(0xFC048047+((x)*0x4000)) +#define MCF_INTC_ICR8(x) MCF_REG08(0xFC048048+((x)*0x4000)) +#define MCF_INTC_ICR9(x) MCF_REG08(0xFC048049+((x)*0x4000)) +#define MCF_INTC_ICR10(x) MCF_REG08(0xFC04804A+((x)*0x4000)) +#define MCF_INTC_ICR11(x) MCF_REG08(0xFC04804B+((x)*0x4000)) +#define MCF_INTC_ICR12(x) MCF_REG08(0xFC04804C+((x)*0x4000)) +#define MCF_INTC_ICR13(x) MCF_REG08(0xFC04804D+((x)*0x4000)) +#define MCF_INTC_ICR14(x) MCF_REG08(0xFC04804E+((x)*0x4000)) +#define MCF_INTC_ICR15(x) MCF_REG08(0xFC04804F+((x)*0x4000)) +#define MCF_INTC_ICR16(x) MCF_REG08(0xFC048050+((x)*0x4000)) +#define MCF_INTC_ICR17(x) MCF_REG08(0xFC048051+((x)*0x4000)) +#define MCF_INTC_ICR18(x) MCF_REG08(0xFC048052+((x)*0x4000)) +#define MCF_INTC_ICR19(x) MCF_REG08(0xFC048053+((x)*0x4000)) +#define MCF_INTC_ICR20(x) MCF_REG08(0xFC048054+((x)*0x4000)) +#define MCF_INTC_ICR21(x) MCF_REG08(0xFC048055+((x)*0x4000)) +#define MCF_INTC_ICR22(x) MCF_REG08(0xFC048056+((x)*0x4000)) +#define MCF_INTC_ICR23(x) MCF_REG08(0xFC048057+((x)*0x4000)) +#define MCF_INTC_ICR24(x) MCF_REG08(0xFC048058+((x)*0x4000)) +#define MCF_INTC_ICR25(x) MCF_REG08(0xFC048059+((x)*0x4000)) +#define MCF_INTC_ICR26(x) MCF_REG08(0xFC04805A+((x)*0x4000)) +#define MCF_INTC_ICR27(x) MCF_REG08(0xFC04805B+((x)*0x4000)) +#define MCF_INTC_ICR28(x) MCF_REG08(0xFC04805C+((x)*0x4000)) +#define MCF_INTC_ICR29(x) MCF_REG08(0xFC04805D+((x)*0x4000)) +#define MCF_INTC_ICR30(x) MCF_REG08(0xFC04805E+((x)*0x4000)) +#define MCF_INTC_ICR31(x) MCF_REG08(0xFC04805F+((x)*0x4000)) +#define MCF_INTC_ICR32(x) MCF_REG08(0xFC048060+((x)*0x4000)) +#define MCF_INTC_ICR33(x) MCF_REG08(0xFC048061+((x)*0x4000)) +#define MCF_INTC_ICR34(x) MCF_REG08(0xFC048062+((x)*0x4000)) +#define MCF_INTC_ICR35(x) MCF_REG08(0xFC048063+((x)*0x4000)) +#define MCF_INTC_ICR36(x) MCF_REG08(0xFC048064+((x)*0x4000)) +#define MCF_INTC_ICR37(x) MCF_REG08(0xFC048065+((x)*0x4000)) +#define MCF_INTC_ICR38(x) MCF_REG08(0xFC048066+((x)*0x4000)) +#define MCF_INTC_ICR39(x) MCF_REG08(0xFC048067+((x)*0x4000)) +#define MCF_INTC_ICR40(x) MCF_REG08(0xFC048068+((x)*0x4000)) +#define MCF_INTC_ICR41(x) MCF_REG08(0xFC048069+((x)*0x4000)) +#define MCF_INTC_ICR42(x) MCF_REG08(0xFC04806A+((x)*0x4000)) +#define MCF_INTC_ICR43(x) MCF_REG08(0xFC04806B+((x)*0x4000)) +#define MCF_INTC_ICR44(x) MCF_REG08(0xFC04806C+((x)*0x4000)) +#define MCF_INTC_ICR45(x) MCF_REG08(0xFC04806D+((x)*0x4000)) +#define MCF_INTC_ICR46(x) MCF_REG08(0xFC04806E+((x)*0x4000)) +#define MCF_INTC_ICR47(x) MCF_REG08(0xFC04806F+((x)*0x4000)) +#define MCF_INTC_ICR48(x) MCF_REG08(0xFC048070+((x)*0x4000)) +#define MCF_INTC_ICR49(x) MCF_REG08(0xFC048071+((x)*0x4000)) +#define MCF_INTC_ICR50(x) MCF_REG08(0xFC048072+((x)*0x4000)) +#define MCF_INTC_ICR51(x) MCF_REG08(0xFC048073+((x)*0x4000)) +#define MCF_INTC_ICR52(x) MCF_REG08(0xFC048074+((x)*0x4000)) +#define MCF_INTC_ICR53(x) MCF_REG08(0xFC048075+((x)*0x4000)) +#define MCF_INTC_ICR54(x) MCF_REG08(0xFC048076+((x)*0x4000)) +#define MCF_INTC_ICR55(x) MCF_REG08(0xFC048077+((x)*0x4000)) +#define MCF_INTC_ICR56(x) MCF_REG08(0xFC048078+((x)*0x4000)) +#define MCF_INTC_ICR57(x) MCF_REG08(0xFC048079+((x)*0x4000)) +#define MCF_INTC_ICR58(x) MCF_REG08(0xFC04807A+((x)*0x4000)) +#define MCF_INTC_ICR59(x) MCF_REG08(0xFC04807B+((x)*0x4000)) +#define MCF_INTC_ICR60(x) MCF_REG08(0xFC04807C+((x)*0x4000)) +#define MCF_INTC_ICR61(x) MCF_REG08(0xFC04807D+((x)*0x4000)) +#define MCF_INTC_ICR62(x) MCF_REG08(0xFC04807E+((x)*0x4000)) +#define MCF_INTC_ICR63(x) MCF_REG08(0xFC04807F+((x)*0x4000)) +#define MCF_INTC_SWIACK(x) MCF_REG08(0xFC0480E0+((x)*0x4000)) +#define MCF_INTC_L1IACK(x) MCF_REG08(0xFC0480E4+((x)*0x4000)) +#define MCF_INTC_L2IACK(x) MCF_REG08(0xFC0480E8+((x)*0x4000)) +#define MCF_INTC_L3IACK(x) MCF_REG08(0xFC0480EC+((x)*0x4000)) +#define MCF_INTC_L4IACK(x) MCF_REG08(0xFC0480F0+((x)*0x4000)) +#define MCF_INTC_L5IACK(x) MCF_REG08(0xFC0480F4+((x)*0x4000)) +#define MCF_INTC_L6IACK(x) MCF_REG08(0xFC0480F8+((x)*0x4000)) +#define MCF_INTC_L7IACK(x) MCF_REG08(0xFC0480FC+((x)*0x4000)) + +/* Bit definitions and macros for MCF_INTC_IPRH */ +#define MCF_INTC_IPRH_INT32 (0x00000001) +#define MCF_INTC_IPRH_INT33 (0x00000002) +#define MCF_INTC_IPRH_INT34 (0x00000004) +#define MCF_INTC_IPRH_INT35 (0x00000008) +#define MCF_INTC_IPRH_INT36 (0x00000010) +#define MCF_INTC_IPRH_INT37 (0x00000020) +#define MCF_INTC_IPRH_INT38 (0x00000040) +#define MCF_INTC_IPRH_INT39 (0x00000080) +#define MCF_INTC_IPRH_INT40 (0x00000100) +#define MCF_INTC_IPRH_INT41 (0x00000200) +#define MCF_INTC_IPRH_INT42 (0x00000400) +#define MCF_INTC_IPRH_INT43 (0x00000800) +#define MCF_INTC_IPRH_INT44 (0x00001000) +#define MCF_INTC_IPRH_INT45 (0x00002000) +#define MCF_INTC_IPRH_INT46 (0x00004000) +#define MCF_INTC_IPRH_INT47 (0x00008000) +#define MCF_INTC_IPRH_INT48 (0x00010000) +#define MCF_INTC_IPRH_INT49 (0x00020000) +#define MCF_INTC_IPRH_INT50 (0x00040000) +#define MCF_INTC_IPRH_INT51 (0x00080000) +#define MCF_INTC_IPRH_INT52 (0x00100000) +#define MCF_INTC_IPRH_INT53 (0x00200000) +#define MCF_INTC_IPRH_INT54 (0x00400000) +#define MCF_INTC_IPRH_INT55 (0x00800000) +#define MCF_INTC_IPRH_INT56 (0x01000000) +#define MCF_INTC_IPRH_INT57 (0x02000000) +#define MCF_INTC_IPRH_INT58 (0x04000000) +#define MCF_INTC_IPRH_INT59 (0x08000000) +#define MCF_INTC_IPRH_INT60 (0x10000000) +#define MCF_INTC_IPRH_INT61 (0x20000000) +#define MCF_INTC_IPRH_INT62 (0x40000000) +#define MCF_INTC_IPRH_INT63 (0x80000000) + +/* Bit definitions and macros for MCF_INTC_IPRL */ +#define MCF_INTC_IPRL_INT0 (0x00000001) +#define MCF_INTC_IPRL_INT1 (0x00000002) +#define MCF_INTC_IPRL_INT2 (0x00000004) +#define MCF_INTC_IPRL_INT3 (0x00000008) +#define MCF_INTC_IPRL_INT4 (0x00000010) +#define MCF_INTC_IPRL_INT5 (0x00000020) +#define MCF_INTC_IPRL_INT6 (0x00000040) +#define MCF_INTC_IPRL_INT7 (0x00000080) +#define MCF_INTC_IPRL_INT8 (0x00000100) +#define MCF_INTC_IPRL_INT9 (0x00000200) +#define MCF_INTC_IPRL_INT10 (0x00000400) +#define MCF_INTC_IPRL_INT11 (0x00000800) +#define MCF_INTC_IPRL_INT12 (0x00001000) +#define MCF_INTC_IPRL_INT13 (0x00002000) +#define MCF_INTC_IPRL_INT14 (0x00004000) +#define MCF_INTC_IPRL_INT15 (0x00008000) +#define MCF_INTC_IPRL_INT16 (0x00010000) +#define MCF_INTC_IPRL_INT17 (0x00020000) +#define MCF_INTC_IPRL_INT18 (0x00040000) +#define MCF_INTC_IPRL_INT19 (0x00080000) +#define MCF_INTC_IPRL_INT20 (0x00100000) +#define MCF_INTC_IPRL_INT21 (0x00200000) +#define MCF_INTC_IPRL_INT22 (0x00400000) +#define MCF_INTC_IPRL_INT23 (0x00800000) +#define MCF_INTC_IPRL_INT24 (0x01000000) +#define MCF_INTC_IPRL_INT25 (0x02000000) +#define MCF_INTC_IPRL_INT26 (0x04000000) +#define MCF_INTC_IPRL_INT27 (0x08000000) +#define MCF_INTC_IPRL_INT28 (0x10000000) +#define MCF_INTC_IPRL_INT29 (0x20000000) +#define MCF_INTC_IPRL_INT30 (0x40000000) +#define MCF_INTC_IPRL_INT31 (0x80000000) + +/* Bit definitions and macros for MCF_INTC_IMRH */ +#define MCF_INTC_IMRH_INT_MASK32 (0x00000001) +#define MCF_INTC_IMRH_INT_MASK33 (0x00000002) +#define MCF_INTC_IMRH_INT_MASK34 (0x00000004) +#define MCF_INTC_IMRH_INT_MASK35 (0x00000008) +#define MCF_INTC_IMRH_INT_MASK36 (0x00000010) +#define MCF_INTC_IMRH_INT_MASK37 (0x00000020) +#define MCF_INTC_IMRH_INT_MASK38 (0x00000040) +#define MCF_INTC_IMRH_INT_MASK39 (0x00000080) +#define MCF_INTC_IMRH_INT_MASK40 (0x00000100) +#define MCF_INTC_IMRH_INT_MASK41 (0x00000200) +#define MCF_INTC_IMRH_INT_MASK42 (0x00000400) +#define MCF_INTC_IMRH_INT_MASK43 (0x00000800) +#define MCF_INTC_IMRH_INT_MASK44 (0x00001000) +#define MCF_INTC_IMRH_INT_MASK45 (0x00002000) +#define MCF_INTC_IMRH_INT_MASK46 (0x00004000) +#define MCF_INTC_IMRH_INT_MASK47 (0x00008000) +#define MCF_INTC_IMRH_INT_MASK48 (0x00010000) +#define MCF_INTC_IMRH_INT_MASK49 (0x00020000) +#define MCF_INTC_IMRH_INT_MASK50 (0x00040000) +#define MCF_INTC_IMRH_INT_MASK51 (0x00080000) +#define MCF_INTC_IMRH_INT_MASK52 (0x00100000) +#define MCF_INTC_IMRH_INT_MASK53 (0x00200000) +#define MCF_INTC_IMRH_INT_MASK54 (0x00400000) +#define MCF_INTC_IMRH_INT_MASK55 (0x00800000) +#define MCF_INTC_IMRH_INT_MASK56 (0x01000000) +#define MCF_INTC_IMRH_INT_MASK57 (0x02000000) +#define MCF_INTC_IMRH_INT_MASK58 (0x04000000) +#define MCF_INTC_IMRH_INT_MASK59 (0x08000000) +#define MCF_INTC_IMRH_INT_MASK60 (0x10000000) +#define MCF_INTC_IMRH_INT_MASK61 (0x20000000) +#define MCF_INTC_IMRH_INT_MASK62 (0x40000000) +#define MCF_INTC_IMRH_INT_MASK63 (0x80000000) + +/* Bit definitions and macros for MCF_INTC_IMRL */ +#define MCF_INTC_IMRL_INT_MASK0 (0x00000001) +#define MCF_INTC_IMRL_INT_MASK1 (0x00000002) +#define MCF_INTC_IMRL_INT_MASK2 (0x00000004) +#define MCF_INTC_IMRL_INT_MASK3 (0x00000008) +#define MCF_INTC_IMRL_INT_MASK4 (0x00000010) +#define MCF_INTC_IMRL_INT_MASK5 (0x00000020) +#define MCF_INTC_IMRL_INT_MASK6 (0x00000040) +#define MCF_INTC_IMRL_INT_MASK7 (0x00000080) +#define MCF_INTC_IMRL_INT_MASK8 (0x00000100) +#define MCF_INTC_IMRL_INT_MASK9 (0x00000200) +#define MCF_INTC_IMRL_INT_MASK10 (0x00000400) +#define MCF_INTC_IMRL_INT_MASK11 (0x00000800) +#define MCF_INTC_IMRL_INT_MASK12 (0x00001000) +#define MCF_INTC_IMRL_INT_MASK13 (0x00002000) +#define MCF_INTC_IMRL_INT_MASK14 (0x00004000) +#define MCF_INTC_IMRL_INT_MASK15 (0x00008000) +#define MCF_INTC_IMRL_INT_MASK16 (0x00010000) +#define MCF_INTC_IMRL_INT_MASK17 (0x00020000) +#define MCF_INTC_IMRL_INT_MASK18 (0x00040000) +#define MCF_INTC_IMRL_INT_MASK19 (0x00080000) +#define MCF_INTC_IMRL_INT_MASK20 (0x00100000) +#define MCF_INTC_IMRL_INT_MASK21 (0x00200000) +#define MCF_INTC_IMRL_INT_MASK22 (0x00400000) +#define MCF_INTC_IMRL_INT_MASK23 (0x00800000) +#define MCF_INTC_IMRL_INT_MASK24 (0x01000000) +#define MCF_INTC_IMRL_INT_MASK25 (0x02000000) +#define MCF_INTC_IMRL_INT_MASK26 (0x04000000) +#define MCF_INTC_IMRL_INT_MASK27 (0x08000000) +#define MCF_INTC_IMRL_INT_MASK28 (0x10000000) +#define MCF_INTC_IMRL_INT_MASK29 (0x20000000) +#define MCF_INTC_IMRL_INT_MASK30 (0x40000000) +#define MCF_INTC_IMRL_INT_MASK31 (0x80000000) + +/* Bit definitions and macros for MCF_INTC_INTFRCH */ +#define MCF_INTC_INTFRCH_INTFRC32 (0x00000001) +#define MCF_INTC_INTFRCH_INTFRC33 (0x00000002) +#define MCF_INTC_INTFRCH_INTFRC34 (0x00000004) +#define MCF_INTC_INTFRCH_INTFRC35 (0x00000008) +#define MCF_INTC_INTFRCH_INTFRC36 (0x00000010) +#define MCF_INTC_INTFRCH_INTFRC37 (0x00000020) +#define MCF_INTC_INTFRCH_INTFRC38 (0x00000040) +#define MCF_INTC_INTFRCH_INTFRC39 (0x00000080) +#define MCF_INTC_INTFRCH_INTFRC40 (0x00000100) +#define MCF_INTC_INTFRCH_INTFRC41 (0x00000200) +#define MCF_INTC_INTFRCH_INTFRC42 (0x00000400) +#define MCF_INTC_INTFRCH_INTFRC43 (0x00000800) +#define MCF_INTC_INTFRCH_INTFRC44 (0x00001000) +#define MCF_INTC_INTFRCH_INTFRC45 (0x00002000) +#define MCF_INTC_INTFRCH_INTFRC46 (0x00004000) +#define MCF_INTC_INTFRCH_INTFRC47 (0x00008000) +#define MCF_INTC_INTFRCH_INTFRC48 (0x00010000) +#define MCF_INTC_INTFRCH_INTFRC49 (0x00020000) +#define MCF_INTC_INTFRCH_INTFRC50 (0x00040000) +#define MCF_INTC_INTFRCH_INTFRC51 (0x00080000) +#define MCF_INTC_INTFRCH_INTFRC52 (0x00100000) +#define MCF_INTC_INTFRCH_INTFRC53 (0x00200000) +#define MCF_INTC_INTFRCH_INTFRC54 (0x00400000) +#define MCF_INTC_INTFRCH_INTFRC55 (0x00800000) +#define MCF_INTC_INTFRCH_INTFRC56 (0x01000000) +#define MCF_INTC_INTFRCH_INTFRC57 (0x02000000) +#define MCF_INTC_INTFRCH_INTFRC58 (0x04000000) +#define MCF_INTC_INTFRCH_INTFRC59 (0x08000000) +#define MCF_INTC_INTFRCH_INTFRC60 (0x10000000) +#define MCF_INTC_INTFRCH_INTFRC61 (0x20000000) +#define MCF_INTC_INTFRCH_INTFRC62 (0x40000000) +#define MCF_INTC_INTFRCH_INTFRC63 (0x80000000) + +/* Bit definitions and macros for MCF_INTC_INTFRCL */ +#define MCF_INTC_INTFRCL_INTFRC0 (0x00000001) +#define MCF_INTC_INTFRCL_INTFRC1 (0x00000002) +#define MCF_INTC_INTFRCL_INTFRC2 (0x00000004) +#define MCF_INTC_INTFRCL_INTFRC3 (0x00000008) +#define MCF_INTC_INTFRCL_INTFRC4 (0x00000010) +#define MCF_INTC_INTFRCL_INTFRC5 (0x00000020) +#define MCF_INTC_INTFRCL_INTFRC6 (0x00000040) +#define MCF_INTC_INTFRCL_INTFRC7 (0x00000080) +#define MCF_INTC_INTFRCL_INTFRC8 (0x00000100) +#define MCF_INTC_INTFRCL_INTFRC9 (0x00000200) +#define MCF_INTC_INTFRCL_INTFRC10 (0x00000400) +#define MCF_INTC_INTFRCL_INTFRC11 (0x00000800) +#define MCF_INTC_INTFRCL_INTFRC12 (0x00001000) +#define MCF_INTC_INTFRCL_INTFRC13 (0x00002000) +#define MCF_INTC_INTFRCL_INTFRC14 (0x00004000) +#define MCF_INTC_INTFRCL_INTFRC15 (0x00008000) +#define MCF_INTC_INTFRCL_INTFRC16 (0x00010000) +#define MCF_INTC_INTFRCL_INTFRC17 (0x00020000) +#define MCF_INTC_INTFRCL_INTFRC18 (0x00040000) +#define MCF_INTC_INTFRCL_INTFRC19 (0x00080000) +#define MCF_INTC_INTFRCL_INTFRC20 (0x00100000) +#define MCF_INTC_INTFRCL_INTFRC21 (0x00200000) +#define MCF_INTC_INTFRCL_INTFRC22 (0x00400000) +#define MCF_INTC_INTFRCL_INTFRC23 (0x00800000) +#define MCF_INTC_INTFRCL_INTFRC24 (0x01000000) +#define MCF_INTC_INTFRCL_INTFRC25 (0x02000000) +#define MCF_INTC_INTFRCL_INTFRC26 (0x04000000) +#define MCF_INTC_INTFRCL_INTFRC27 (0x08000000) +#define MCF_INTC_INTFRCL_INTFRC28 (0x10000000) +#define MCF_INTC_INTFRCL_INTFRC29 (0x20000000) +#define MCF_INTC_INTFRCL_INTFRC30 (0x40000000) +#define MCF_INTC_INTFRCL_INTFRC31 (0x80000000) + +/* Bit definitions and macros for MCF_INTC_ICONFIG */ +#define MCF_INTC_ICONFIG_EMASK (0x0020) +#define MCF_INTC_ICONFIG_ELVLPRI1 (0x0200) +#define MCF_INTC_ICONFIG_ELVLPRI2 (0x0400) +#define MCF_INTC_ICONFIG_ELVLPRI3 (0x0800) +#define MCF_INTC_ICONFIG_ELVLPRI4 (0x1000) +#define MCF_INTC_ICONFIG_ELVLPRI5 (0x2000) +#define MCF_INTC_ICONFIG_ELVLPRI6 (0x4000) +#define MCF_INTC_ICONFIG_ELVLPRI7 (0x8000) + +/* Bit definitions and macros for MCF_INTC_SIMR */ +#define MCF_INTC_SIMR_SIMR(x) (((x)&0x7F)<<0) + +/* Bit definitions and macros for MCF_INTC_CIMR */ +#define MCF_INTC_CIMR_CIMR(x) (((x)&0x7F)<<0) + +/* Bit definitions and macros for MCF_INTC_CLMASK */ +#define MCF_INTC_CLMASK_CLMASK(x) (((x)&0x0F)<<0) + +/* Bit definitions and macros for MCF_INTC_SLMASK */ +#define MCF_INTC_SLMASK_SLMASK(x) (((x)&0x0F)<<0) + +/* Bit definitions and macros for MCF_INTC_ICR */ +#define MCF_INTC_ICR_IL(x) (((x)&0x07)<<0) + +/* Bit definitions and macros for MCF_INTC_SWIACK */ +#define MCF_INTC_SWIACK_VECTOR(x) (((x)&0xFF)<<0) + +/* Bit definitions and macros for MCF_INTC_LIACK */ +#define MCF_INTC_LIACK_VECTOR(x) (((x)&0xFF)<<0) + +/********************************************************************/ +/********************************************************************* +* +* LCD Controller (LCDC) +* +*********************************************************************/ + +/* Register read/write macros */ +#define MCF_LCDC_LSSAR MCF_REG32(0xFC0AC000) +#define MCF_LCDC_LSR MCF_REG32(0xFC0AC004) +#define MCF_LCDC_LVPWR MCF_REG32(0xFC0AC008) +#define MCF_LCDC_LCPR MCF_REG32(0xFC0AC00C) +#define MCF_LCDC_LCWHBR MCF_REG32(0xFC0AC010) +#define MCF_LCDC_LCCMR MCF_REG32(0xFC0AC014) +#define MCF_LCDC_LPCR MCF_REG32(0xFC0AC018) +#define MCF_LCDC_LHCR MCF_REG32(0xFC0AC01C) +#define MCF_LCDC_LVCR MCF_REG32(0xFC0AC020) +#define MCF_LCDC_LPOR MCF_REG32(0xFC0AC024) +#define MCF_LCDC_LSCR MCF_REG32(0xFC0AC028) +#define MCF_LCDC_LPCCR MCF_REG32(0xFC0AC02C) +#define MCF_LCDC_LDCR MCF_REG32(0xFC0AC030) +#define MCF_LCDC_LRMCR MCF_REG32(0xFC0AC034) +#define MCF_LCDC_LICR MCF_REG32(0xFC0AC038) +#define MCF_LCDC_LIER MCF_REG32(0xFC0AC03C) +#define MCF_LCDC_LISR MCF_REG32(0xFC0AC040) +#define MCF_LCDC_LGWSAR MCF_REG32(0xFC0AC050) +#define MCF_LCDC_LGWSR MCF_REG32(0xFC0AC054) +#define MCF_LCDC_LGWVPWR MCF_REG32(0xFC0AC058) +#define MCF_LCDC_LGWPOR MCF_REG32(0xFC0AC05C) +#define MCF_LCDC_LGWPR MCF_REG32(0xFC0AC060) +#define MCF_LCDC_LGWCR MCF_REG32(0xFC0AC064) +#define MCF_LCDC_LGWDCR MCF_REG32(0xFC0AC068) +#define MCF_LCDC_BPLUT_BASE MCF_REG32(0xFC0AC800) +#define MCF_LCDC_GWLUT_BASE MCF_REG32(0xFC0ACC00) + +/* Bit definitions and macros for MCF_LCDC_LSSAR */ +#define MCF_LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2) + +/* Bit definitions and macros for MCF_LCDC_LSR */ +#define MCF_LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0) +#define MCF_LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20) + +/* Bit definitions and macros for MCF_LCDC_LVPWR */ +#define MCF_LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0) + +/* Bit definitions and macros for MCF_LCDC_LCPR */ +#define MCF_LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0) +#define MCF_LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16) +#define MCF_LCDC_LCPR_OP (0x10000000) +#define MCF_LCDC_LCPR_CC(x) (((x)&0x00000003)<<30) +#define MCF_LCDC_LCPR_CC_TRANSPARENT (0x00000000) +#define MCF_LCDC_LCPR_CC_OR (0x40000000) +#define MCF_LCDC_LCPR_CC_XOR (0x80000000) +#define MCF_LCDC_LCPR_CC_AND (0xC0000000) +#define MCF_LCDC_LCPR_OP_ON (0x10000000) +#define MCF_LCDC_LCPR_OP_OFF (0x00000000) + +/* Bit definitions and macros for MCF_LCDC_LCWHBR */ +#define MCF_LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0) +#define MCF_LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16) +#define MCF_LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24) +#define MCF_LCDC_LCWHBR_BK_EN (0x80000000) +#define MCF_LCDC_LCWHBR_BK_EN_ON (0x80000000) +#define MCF_LCDC_LCWHBR_BK_EN_OFF (0x00000000) + +/* Bit definitions and macros for MCF_LCDC_LCCMR */ +#define MCF_LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0) +#define MCF_LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6) +#define MCF_LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12) + +/* Bit definitions and macros for MCF_LCDC_LPCR */ +#define MCF_LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0) +#define MCF_LCDC_LPCR_SHARP (0x00000040) +#define MCF_LCDC_LPCR_SCLKSEL (0x00000080) +#define MCF_LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8) +#define MCF_LCDC_LPCR_ACDSEL (0x00008000) +#define MCF_LCDC_LPCR_REV_VS (0x00010000) +#define MCF_LCDC_LPCR_SWAP_SEL (0x00020000) +#define MCF_LCDC_LPCR_ENDSEL (0x00040000) +#define MCF_LCDC_LPCR_SCLKIDLE (0x00080000) +#define MCF_LCDC_LPCR_OEPOL (0x00100000) +#define MCF_LCDC_LPCR_CLKPOL (0x00200000) +#define MCF_LCDC_LPCR_LPPOL (0x00400000) +#define MCF_LCDC_LPCR_FLM (0x00800000) +#define MCF_LCDC_LPCR_PIXPOL (0x01000000) +#define MCF_LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25) +#define MCF_LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28) +#define MCF_LCDC_LPCR_COLOR (0x40000000) +#define MCF_LCDC_LPCR_TFT (0x80000000) +#define MCF_LCDC_LPCR_MODE_MONOCGROME (0x00000000) +#define MCF_LCDC_LPCR_MODE_CSTN (0x40000000) +#define MCF_LCDC_LPCR_MODE_TFT (0xC0000000) +#define MCF_LCDC_LPCR_PBSIZ_1 (0x00000000) +#define MCF_LCDC_LPCR_PBSIZ_2 (0x10000000) +#define MCF_LCDC_LPCR_PBSIZ_4 (0x20000000) +#define MCF_LCDC_LPCR_PBSIZ_8 (0x30000000) +#define MCF_LCDC_LPCR_BPIX_1bpp (0x00000000) +#define MCF_LCDC_LPCR_BPIX_2bpp (0x02000000) +#define MCF_LCDC_LPCR_BPIX_4bpp (0x04000000) +#define MCF_LCDC_LPCR_BPIX_8bpp (0x06000000) +#define MCF_LCDC_LPCR_BPIX_12bpp (0x08000000) +#define MCF_LCDC_LPCR_BPIX_16bpp (0x0A000000) +#define MCF_LCDC_LPCR_BPIX_18bpp (0x0C000000) + +#define MCF_LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30) + +/* Bit definitions and macros for MCF_LCDC_LHCR */ +#define MCF_LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0) +#define MCF_LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8) +#define MCF_LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26) + +/* Bit definitions and macros for MCF_LCDC_LVCR */ +#define MCF_LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0) +#define MCF_LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8) +#define MCF_LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26) + +/* Bit definitions and macros for MCF_LCDC_LPOR */ +#define MCF_LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0) + +/* Bit definitions and macros for MCF_LCDC_LPCCR */ +#define MCF_LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0) +#define MCF_LCDC_LPCCR_CC_EN (0x00000100) +#define MCF_LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9) +#define MCF_LCDC_LPCCR_LDMSK (0x00008000) +#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16) +#define MCF_LCDC_LPCCR_SCR_LINEPULSE (0x00000000) +#define MCF_LCDC_LPCCR_SCR_PIXELCLK (0x00002000) +#define MCF_LCDC_LPCCR_SCR_LCDCLOCK (0x00004000) + +/* Bit definitions and macros for MCF_LCDC_LDCR */ +#define MCF_LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0) +#define MCF_LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16) +#define MCF_LCDC_LDCR_BURST (0x80000000) + +/* Bit definitions and macros for MCF_LCDC_LRMCR */ +#define MCF_LCDC_LRMCR_SEL_REF (0x00000001) + +/* Bit definitions and macros for MCF_LCDC_LICR */ +#define MCF_LCDC_LICR_INTCON (0x00000001) +#define MCF_LCDC_LICR_INTSYN (0x00000004) +#define MCF_LCDC_LICR_GW_INT_CON (0x00000010) + +/* Bit definitions and macros for MCF_LCDC_LIER */ +#define MCF_LCDC_LIER_BOF_EN (0x00000001) +#define MCF_LCDC_LIER_EOF_EN (0x00000002) +#define MCF_LCDC_LIER_ERR_RES_EN (0x00000004) +#define MCF_LCDC_LIER_UDR_ERR_EN (0x00000008) +#define MCF_LCDC_LIER_GW_BOF_EN (0x00000010) +#define MCF_LCDC_LIER_GW_EOF_EN (0x00000020) +#define MCF_LCDC_LIER_GW_ERR_RES_EN (0x00000040) +#define MCF_LCDC_LIER_GW_UDR_ERR_EN (0x00000080) + +/* Bit definitions and macros for MCF_LCDC_LISR */ +#define MCF_LCDC_LISR_BOF (0x00000001) +#define MCF_LCDC_LISR_EOF (0x00000002) +#define MCF_LCDC_LISR_ERR_RES (0x00000004) +#define MCF_LCDC_LISR_UDR_ERR (0x00000008) +#define MCF_LCDC_LISR_GW_BOF (0x00000010) +#define MCF_LCDC_LISR_GW_EOF (0x00000020) +#define MCF_LCDC_LISR_GW_ERR_RES (0x00000040) +#define MCF_LCDC_LISR_GW_UDR_ERR (0x00000080) + +/* Bit definitions and macros for MCF_LCDC_LGWSAR */ +#define MCF_LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2) + +/* Bit definitions and macros for MCF_LCDC_LGWSR */ +#define MCF_LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0) +#define MCF_LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20) + +/* Bit definitions and macros for MCF_LCDC_LGWVPWR */ +#define MCF_LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0) + +/* Bit definitions and macros for MCF_LCDC_LGWPOR */ +#define MCF_LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0) + +/* Bit definitions and macros for MCF_LCDC_LGWPR */ +#define MCF_LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0) +#define MCF_LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16) + +/* Bit definitions and macros for MCF_LCDC_LGWCR */ +#define MCF_LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0) +#define MCF_LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6) +#define MCF_LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12) +#define MCF_LCDC_LGWCR_GW_RVS (0x00200000) +#define MCF_LCDC_LGWCR_GWE (0x00400000) +#define MCF_LCDC_LGWCR_GWCKE (0x00800000) +#define MCF_LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24) + +/* Bit definitions and macros for MCF_LCDC_LGWDCR */ +#define MCF_LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0) +#define MCF_LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16) +#define MCF_LCDC_LGWDCR_GWBT (0x80000000) + +/* Bit definitions and macros for MCF_LCDC_LSCR */ +#define MCF_LCDC_LSCR_PS_RISE_DELAY(x) (((x)&0x0000003F)<<26) +#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x) (((x)&0x000000FF)<<16) +#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8) +#define MCF_LCDC_LSCR_GRAY_2(x) (((x)&0x0000000F)<<4) +#define MCF_LCDC_LSCR_GRAY_1(x) (((x)&0x0000000F)<<0) + +/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */ +#define MCF_LCDC_BPLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) + +/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */ +#define MCF_LCDC_GWLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) + +/********************************************************************* + * + * Phase Locked Loop (PLL) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_PLL_PODR MCF_REG08(0xFC0C0000) +#define MCF_PLL_PLLCR MCF_REG08(0xFC0C0004) +#define MCF_PLL_PMDR MCF_REG08(0xFC0C0008) +#define MCF_PLL_PFDR MCF_REG08(0xFC0C000C) + +/* Bit definitions and macros for MCF_PLL_PODR */ +#define MCF_PLL_PODR_BUSDIV(x) (((x)&0x0F)<<0) +#define MCF_PLL_PODR_CPUDIV(x) (((x)&0x0F)<<4) + +/* Bit definitions and macros for MCF_PLL_PLLCR */ +#define MCF_PLL_PLLCR_DITHDEV(x) (((x)&0x07)<<0) +#define MCF_PLL_PLLCR_DITHEN (0x80) + +/* Bit definitions and macros for MCF_PLL_PMDR */ +#define MCF_PLL_PMDR_MODDIV(x) (((x)&0xFF)<<0) + +/* Bit definitions and macros for MCF_PLL_PFDR */ +#define MCF_PLL_PFDR_MFD(x) (((x)&0xFF)<<0) + +/********************************************************************* + * + * System Control Module Registers (SCM) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_SCM_MPR MCF_REG32(0xFC000000) +#define MCF_SCM_PACRA MCF_REG32(0xFC000020) +#define MCF_SCM_PACRB MCF_REG32(0xFC000024) +#define MCF_SCM_PACRC MCF_REG32(0xFC000028) +#define MCF_SCM_PACRD MCF_REG32(0xFC00002C) +#define MCF_SCM_PACRE MCF_REG32(0xFC000040) +#define MCF_SCM_PACRF MCF_REG32(0xFC000044) + +#define MCF_SCM_BCR MCF_REG32(0xFC040024) + +/********************************************************************* + * + * SDRAM Controller (SDRAMC) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_SDRAMC_SDMR MCF_REG32(0xFC0B8000) +#define MCF_SDRAMC_SDCR MCF_REG32(0xFC0B8004) +#define MCF_SDRAMC_SDCFG1 MCF_REG32(0xFC0B8008) +#define MCF_SDRAMC_SDCFG2 MCF_REG32(0xFC0B800C) +#define MCF_SDRAMC_LIMP_FIX MCF_REG32(0xFC0B8080) +#define MCF_SDRAMC_SDDS MCF_REG32(0xFC0B8100) +#define MCF_SDRAMC_SDCS0 MCF_REG32(0xFC0B8110) +#define MCF_SDRAMC_SDCS1 MCF_REG32(0xFC0B8114) +#define MCF_SDRAMC_SDCS2 MCF_REG32(0xFC0B8118) +#define MCF_SDRAMC_SDCS3 MCF_REG32(0xFC0B811C) +#define MCF_SDRAMC_SDCS(x) MCF_REG32(0xFC0B8110+((x)*0x004)) + +/* Bit definitions and macros for MCF_SDRAMC_SDMR */ +#define MCF_SDRAMC_SDMR_CMD (0x00010000) +#define MCF_SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) +#define MCF_SDRAMC_SDMR_BNKAD(x) (((x)&0x00000003)<<30) +#define MCF_SDRAMC_SDMR_BNKAD_LMR (0x00000000) +#define MCF_SDRAMC_SDMR_BNKAD_LEMR (0x40000000) + +/* Bit definitions and macros for MCF_SDRAMC_SDCR */ +#define MCF_SDRAMC_SDCR_IPALL (0x00000002) +#define MCF_SDRAMC_SDCR_IREF (0x00000004) +#define MCF_SDRAMC_SDCR_DQS_OE(x) (((x)&0x0000000F)<<8) +#define MCF_SDRAMC_SDCR_PS(x) (((x)&0x00000003)<<12) +#define MCF_SDRAMC_SDCR_RCNT(x) (((x)&0x0000003F)<<16) +#define MCF_SDRAMC_SDCR_OE_RULE (0x00400000) +#define MCF_SDRAMC_SDCR_MUX(x) (((x)&0x00000003)<<24) +#define MCF_SDRAMC_SDCR_REF (0x10000000) +#define MCF_SDRAMC_SDCR_DDR (0x20000000) +#define MCF_SDRAMC_SDCR_CKE (0x40000000) +#define MCF_SDRAMC_SDCR_MODE_EN (0x80000000) +#define MCF_SDRAMC_SDCR_PS_16 (0x00002000) +#define MCF_SDRAMC_SDCR_PS_32 (0x00000000) + +/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */ +#define MCF_SDRAMC_SDCFG1_WTLAT(x) (((x)&0x00000007)<<4) +#define MCF_SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) +#define MCF_SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) +#define MCF_SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) +#define MCF_SDRAMC_SDCFG1_RDLAT(x) (((x)&0x0000000F)<<20) +#define MCF_SDRAMC_SDCFG1_SWT2RD(x) (((x)&0x00000007)<<24) +#define MCF_SDRAMC_SDCFG1_SRD2RW(x) (((x)&0x0000000F)<<28) + +/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */ +#define MCF_SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) +#define MCF_SDRAMC_SDCFG2_BRD2WT(x) (((x)&0x0000000F)<<20) +#define MCF_SDRAMC_SDCFG2_BWT2RW(x) (((x)&0x0000000F)<<24) +#define MCF_SDRAMC_SDCFG2_BRD2PRE(x) (((x)&0x0000000F)<<28) + +/* Device Errata - LIMP mode work around */ +#define MCF_SDRAMC_REFRESH (0x40000000) + +/* Bit definitions and macros for MCF_SDRAMC_SDDS */ +#define MCF_SDRAMC_SDDS_SB_D(x) (((x)&0x00000003)<<0) +#define MCF_SDRAMC_SDDS_SB_S(x) (((x)&0x00000003)<<2) +#define MCF_SDRAMC_SDDS_SB_A(x) (((x)&0x00000003)<<4) +#define MCF_SDRAMC_SDDS_SB_C(x) (((x)&0x00000003)<<6) +#define MCF_SDRAMC_SDDS_SB_E(x) (((x)&0x00000003)<<8) + +/* Bit definitions and macros for MCF_SDRAMC_SDCS */ +#define MCF_SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)<<0) +#define MCF_SDRAMC_SDCS_BASE(x) (((x)&0x00000FFF)<<20) +#define MCF_SDRAMC_SDCS_BA(x) ((x)&0xFFF00000) +#define MCF_SDRAMC_SDCS_CSSZ_DIABLE (0x00000000) +#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) +#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) +#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) +#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) +#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) +#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) +#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) +#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) +#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) +#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) +#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) +#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) +#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) + +/********************************************************************* + * + * FlexCAN module registers + * + *********************************************************************/ +#define MCF_FLEXCAN_BASEADDR(x) (0xFC020000+(x)*0x0800) +#define MCF_FLEXCAN_CANMCR(x) MCF_REG32(0xFC020000+(x)*0x0800+0x00) +#define MCF_FLEXCAN_CANCTRL(x) MCF_REG32(0xFC020000+(x)*0x0800+0x04) +#define MCF_FLEXCAN_TIMER(x) MCF_REG32(0xFC020000+(x)*0x0800+0x08) +#define MCF_FLEXCAN_RXGMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x10) +#define MCF_FLEXCAN_RX14MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x14) +#define MCF_FLEXCAN_RX15MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x18) +#define MCF_FLEXCAN_ERRCNT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x1C) +#define MCF_FLEXCAN_ERRSTAT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x20) +#define MCF_FLEXCAN_IMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x28) +#define MCF_FLEXCAN_IFLAG(x) MCF_REG32(0xFC020000+(x)*0x0800+0x30) + +#define MCF_FLEXCAN_MB_CNT(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0) +#define MCF_FLEXCAN_MB_ID(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4) +#define MCF_FLEXCAN_MB_DB(x,y,z) MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1) + +/* + * FlexCAN Module Configuration Register + */ +#define CANMCR_MDIS (0x80000000) +#define CANMCR_FRZ (0x40000000) +#define CANMCR_HALT (0x10000000) +#define CANMCR_SOFTRST (0x02000000) +#define CANMCR_FRZACK (0x01000000) +#define CANMCR_SUPV (0x00800000) +#define CANMCR_MAXMB(x) ((x)&0x0F) + +/* + * FlexCAN Control Register + */ +#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) +#define CANCTRL_RJW(x) (((x)&0x03)<<22) +#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) +#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) +#define CANCTRL_BOFFMSK (0x00008000) +#define CANCTRL_ERRMSK (0x00004000) +#define CANCTRL_CLKSRC (0x00002000) +#define CANCTRL_LPB (0x00001000) +#define CANCTRL_SAMP (0x00000080) +#define CANCTRL_BOFFREC (0x00000040) +#define CANCTRL_TSYNC (0x00000020) +#define CANCTRL_LBUF (0x00000010) +#define CANCTRL_LOM (0x00000008) +#define CANCTRL_PROPSEG(x) ((x)&0x07) + +/* + * FlexCAN Error Counter Register + */ +#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) +#define ERRCNT_TXECTR(x) ((x)&0xFF) + +/* + * FlexCAN Error and Status Register + */ +#define ERRSTAT_BITERR(x) (((x)&0x03)<<14) +#define ERRSTAT_ACKERR (0x00002000) +#define ERRSTAT_CRCERR (0x00001000) +#define ERRSTAT_FRMERR (0x00000800) +#define ERRSTAT_STFERR (0x00000400) +#define ERRSTAT_TXWRN (0x00000200) +#define ERRSTAT_RXWRN (0x00000100) +#define ERRSTAT_IDLE (0x00000080) +#define ERRSTAT_TXRX (0x00000040) +#define ERRSTAT_FLTCONF(x) (((x)&0x03)<<4) +#define ERRSTAT_BOFFINT (0x00000004) +#define ERRSTAT_ERRINT (0x00000002) + +/* + * Interrupt Mask Register + */ +#define IMASK_BUF15M (0x8000) +#define IMASK_BUF14M (0x4000) +#define IMASK_BUF13M (0x2000) +#define IMASK_BUF12M (0x1000) +#define IMASK_BUF11M (0x0800) +#define IMASK_BUF10M (0x0400) +#define IMASK_BUF9M (0x0200) +#define IMASK_BUF8M (0x0100) +#define IMASK_BUF7M (0x0080) +#define IMASK_BUF6M (0x0040) +#define IMASK_BUF5M (0x0020) +#define IMASK_BUF4M (0x0010) +#define IMASK_BUF3M (0x0008) +#define IMASK_BUF2M (0x0004) +#define IMASK_BUF1M (0x0002) +#define IMASK_BUF0M (0x0001) +#define IMASK_BUFnM(x) (0x1<<(x)) +#define IMASK_BUFF_ENABLE_ALL (0x1111) +#define IMASK_BUFF_DISABLE_ALL (0x0000) + +/* + * Interrupt Flag Register + */ +#define IFLAG_BUF15M (0x8000) +#define IFLAG_BUF14M (0x4000) +#define IFLAG_BUF13M (0x2000) +#define IFLAG_BUF12M (0x1000) +#define IFLAG_BUF11M (0x0800) +#define IFLAG_BUF10M (0x0400) +#define IFLAG_BUF9M (0x0200) +#define IFLAG_BUF8M (0x0100) +#define IFLAG_BUF7M (0x0080) +#define IFLAG_BUF6M (0x0040) +#define IFLAG_BUF5M (0x0020) +#define IFLAG_BUF4M (0x0010) +#define IFLAG_BUF3M (0x0008) +#define IFLAG_BUF2M (0x0004) +#define IFLAG_BUF1M (0x0002) +#define IFLAG_BUF0M (0x0001) +#define IFLAG_BUFF_SET_ALL (0xFFFF) +#define IFLAG_BUFF_CLEAR_ALL (0x0000) +#define IFLAG_BUFnM(x) (0x1<<(x)) + +/* + * Message Buffers + */ +#define MB_CNT_CODE(x) (((x)&0x0F)<<24) +#define MB_CNT_SRR (0x00400000) +#define MB_CNT_IDE (0x00200000) +#define MB_CNT_RTR (0x00100000) +#define MB_CNT_LENGTH(x) (((x)&0x0F)<<16) +#define MB_CNT_TIMESTAMP(x) ((x)&0xFFFF) +#define MB_ID_STD(x) (((x)&0x07FF)<<18) +#define MB_ID_EXT(x) ((x)&0x3FFFF) + +/********************************************************************* + * + * Edge Port Module (EPORT) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000) +#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002) +#define MCF_EPORT_EPIER MCF_REG08(0xFC094003) +#define MCF_EPORT_EPDR MCF_REG08(0xFC094004) +#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005) +#define MCF_EPORT_EPFR MCF_REG08(0xFC094006) + +/* Bit definitions and macros for MCF_EPORT_EPPAR */ +#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) +#define MCF_EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4) +#define MCF_EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6) +#define MCF_EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8) +#define MCF_EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10) +#define MCF_EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12) +#define MCF_EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14) +#define MCF_EPORT_EPPAR_LEVEL (0) +#define MCF_EPORT_EPPAR_RISING (1) +#define MCF_EPORT_EPPAR_FALLING (2) +#define MCF_EPORT_EPPAR_BOTH (3) +#define MCF_EPORT_EPPAR_EPPA7_LEVEL (0x0000) +#define MCF_EPORT_EPPAR_EPPA7_RISING (0x4000) +#define MCF_EPORT_EPPAR_EPPA7_FALLING (0x8000) +#define MCF_EPORT_EPPAR_EPPA7_BOTH (0xC000) +#define MCF_EPORT_EPPAR_EPPA6_LEVEL (0x0000) +#define MCF_EPORT_EPPAR_EPPA6_RISING (0x1000) +#define MCF_EPORT_EPPAR_EPPA6_FALLING (0x2000) +#define MCF_EPORT_EPPAR_EPPA6_BOTH (0x3000) +#define MCF_EPORT_EPPAR_EPPA5_LEVEL (0x0000) +#define MCF_EPORT_EPPAR_EPPA5_RISING (0x0400) +#define MCF_EPORT_EPPAR_EPPA5_FALLING (0x0800) +#define MCF_EPORT_EPPAR_EPPA5_BOTH (0x0C00) +#define MCF_EPORT_EPPAR_EPPA4_LEVEL (0x0000) +#define MCF_EPORT_EPPAR_EPPA4_RISING (0x0100) +#define MCF_EPORT_EPPAR_EPPA4_FALLING (0x0200) +#define MCF_EPORT_EPPAR_EPPA4_BOTH (0x0300) +#define MCF_EPORT_EPPAR_EPPA3_LEVEL (0x0000) +#define MCF_EPORT_EPPAR_EPPA3_RISING (0x0040) +#define MCF_EPORT_EPPAR_EPPA3_FALLING (0x0080) +#define MCF_EPORT_EPPAR_EPPA3_BOTH (0x00C0) +#define MCF_EPORT_EPPAR_EPPA2_LEVEL (0x0000) +#define MCF_EPORT_EPPAR_EPPA2_RISING (0x0010) +#define MCF_EPORT_EPPAR_EPPA2_FALLING (0x0020) +#define MCF_EPORT_EPPAR_EPPA2_BOTH (0x0030) +#define MCF_EPORT_EPPAR_EPPA1_LEVEL (0x0000) +#define MCF_EPORT_EPPAR_EPPA1_RISING (0x0004) +#define MCF_EPORT_EPPAR_EPPA1_FALLING (0x0008) +#define MCF_EPORT_EPPAR_EPPA1_BOTH (0x000C) + +/* Bit definitions and macros for MCF_EPORT_EPDDR */ +#define MCF_EPORT_EPDDR_EPDD1 (0x02) +#define MCF_EPORT_EPDDR_EPDD2 (0x04) +#define MCF_EPORT_EPDDR_EPDD3 (0x08) +#define MCF_EPORT_EPDDR_EPDD4 (0x10) +#define MCF_EPORT_EPDDR_EPDD5 (0x20) +#define MCF_EPORT_EPDDR_EPDD6 (0x40) +#define MCF_EPORT_EPDDR_EPDD7 (0x80) + +/* Bit definitions and macros for MCF_EPORT_EPIER */ +#define MCF_EPORT_EPIER_EPIE1 (0x02) +#define MCF_EPORT_EPIER_EPIE2 (0x04) +#define MCF_EPORT_EPIER_EPIE3 (0x08) +#define MCF_EPORT_EPIER_EPIE4 (0x10) +#define MCF_EPORT_EPIER_EPIE5 (0x20) +#define MCF_EPORT_EPIER_EPIE6 (0x40) +#define MCF_EPORT_EPIER_EPIE7 (0x80) + +/* Bit definitions and macros for MCF_EPORT_EPDR */ +#define MCF_EPORT_EPDR_EPD1 (0x02) +#define MCF_EPORT_EPDR_EPD2 (0x04) +#define MCF_EPORT_EPDR_EPD3 (0x08) +#define MCF_EPORT_EPDR_EPD4 (0x10) +#define MCF_EPORT_EPDR_EPD5 (0x20) +#define MCF_EPORT_EPDR_EPD6 (0x40) +#define MCF_EPORT_EPDR_EPD7 (0x80) + +/* Bit definitions and macros for MCF_EPORT_EPPDR */ +#define MCF_EPORT_EPPDR_EPPD1 (0x02) +#define MCF_EPORT_EPPDR_EPPD2 (0x04) +#define MCF_EPORT_EPPDR_EPPD3 (0x08) +#define MCF_EPORT_EPPDR_EPPD4 (0x10) +#define MCF_EPORT_EPPDR_EPPD5 (0x20) +#define MCF_EPORT_EPPDR_EPPD6 (0x40) +#define MCF_EPORT_EPPDR_EPPD7 (0x80) + +/* Bit definitions and macros for MCF_EPORT_EPFR */ +#define MCF_EPORT_EPFR_EPF1 (0x02) +#define MCF_EPORT_EPFR_EPF2 (0x04) +#define MCF_EPORT_EPFR_EPF3 (0x08) +#define MCF_EPORT_EPFR_EPF4 (0x10) +#define MCF_EPORT_EPFR_EPF5 (0x20) +#define MCF_EPORT_EPFR_EPF6 (0x40) +#define MCF_EPORT_EPFR_EPF7 (0x80) + +/********************************************************************/ +#endif /* m532xsim_h */ diff --git a/arch/m68knommu/include/asm/m5407sim.h b/arch/m68knommu/include/asm/m5407sim.h new file mode 100644 index 000000000000..cc22c4a53005 --- /dev/null +++ b/arch/m68knommu/include/asm/m5407sim.h @@ -0,0 +1,157 @@ +/****************************************************************************/ + +/* + * m5407sim.h -- ColdFire 5407 System Integration Module support. + * + * (C) Copyright 2000, Lineo (www.lineo.com) + * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd. + * + * Modified by David W. Miller for the MCF5307 Eval Board. + */ + +/****************************************************************************/ +#ifndef m5407sim_h +#define m5407sim_h +/****************************************************************************/ + +/* + * Define the 5407 SIM register set addresses. + */ +#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ +#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ +#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ +#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ +#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ +#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ +#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ +#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ +#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ +#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ +#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ +#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ +#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ +#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ +#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ +#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ +#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ +#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ +#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ +#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ +#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ +#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ +#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ + +#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ +#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ +#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ +#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ +#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ +#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ + +#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ +#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ +#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ +#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ +#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ +#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ +#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ +#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ +#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ +#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */ +#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */ +#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ +#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */ +#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */ +#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ +#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */ +#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */ +#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ + +#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ +#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ +#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ +#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ +#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ + +#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ +#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ + + +/* + * Some symbol defines for the above... + */ +#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ +#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ +#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ +#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ +#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ +#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ +#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ +#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ +#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ + +/* + * Macro to set IMR register. It is 32 bits on the 5407. + */ +#define mcf_getimr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) + +#define mcf_setimr(imr) \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); + +#define mcf_getipr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) + + +/* + * Some symbol defines for the Parallel Port Pin Assignment Register + */ +#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */ + /* Clear to select par I/O */ +#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */ + /* Clear to select par I/O */ + +/* + * Defines for the IRQPAR Register + */ +#define IRQ5_LEVEL4 0x80 +#define IRQ3_LEVEL6 0x40 +#define IRQ1_LEVEL2 0x20 + + +/* + * Define the Cache register flags. + */ +#define CACR_DEC 0x80000000 /* Enable data cache */ +#define CACR_DWP 0x40000000 /* Data write protection */ +#define CACR_DESB 0x20000000 /* Enable data store buffer */ +#define CACR_DDPI 0x10000000 /* Disable CPUSHL */ +#define CACR_DHCLK 0x08000000 /* Half data cache lock mode */ +#define CACR_DDCM_WT 0x00000000 /* Write through cache*/ +#define CACR_DDCM_CP 0x02000000 /* Copyback cache */ +#define CACR_DDCM_P 0x04000000 /* No cache, precise */ +#define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */ +#define CACR_DCINVA 0x01000000 /* Invalidate data cache */ +#define CACR_BEC 0x00080000 /* Enable branch cache */ +#define CACR_BCINVA 0x00040000 /* Invalidate branch cache */ +#define CACR_IEC 0x00008000 /* Enable instruction cache */ +#define CACR_DNFB 0x00002000 /* Inhibited fill buffer */ +#define CACR_IDPI 0x00001000 /* Disable CPUSHL */ +#define CACR_IHLCK 0x00000800 /* Intruction cache half lock */ +#define CACR_IDCM 0x00000400 /* Intruction cache inhibit */ +#define CACR_ICINVA 0x00000100 /* Invalidate instr cache */ + +#define ACR_BASE_POS 24 /* Address Base */ +#define ACR_MASK_POS 16 /* Address Mask */ +#define ACR_ENABLE 0x00008000 /* Enable address */ +#define ACR_USER 0x00000000 /* User mode access only */ +#define ACR_SUPER 0x00002000 /* Supervisor mode only */ +#define ACR_ANY 0x00004000 /* Match any access mode */ +#define ACR_CM_WT 0x00000000 /* Write through mode */ +#define ACR_CM_CP 0x00000020 /* Copyback mode */ +#define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */ +#define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */ +#define ACR_WPROTECT 0x00000004 /* Write protect */ + +/****************************************************************************/ +#endif /* m5407sim_h */ diff --git a/arch/m68knommu/include/asm/m68360.h b/arch/m68knommu/include/asm/m68360.h new file mode 100644 index 000000000000..eb7d39ef2855 --- /dev/null +++ b/arch/m68knommu/include/asm/m68360.h @@ -0,0 +1,13 @@ +#include "m68360_regs.h" +#include "m68360_pram.h" +#include "m68360_quicc.h" +#include "m68360_enet.h" + +#ifdef CONFIG_M68360 + +#define CPM_INTERRUPT 4 + +/* see MC68360 User's Manual, p. 7-377 */ +#define CPM_VECTOR_BASE 0x04 /* 3 MSbits of CPM vector */ + +#endif /* CONFIG_M68360 */ diff --git a/arch/m68knommu/include/asm/m68360_enet.h b/arch/m68knommu/include/asm/m68360_enet.h new file mode 100644 index 000000000000..c36f4d059203 --- /dev/null +++ b/arch/m68knommu/include/asm/m68360_enet.h @@ -0,0 +1,177 @@ +/*********************************** + * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ + *********************************** + * + *************************************** + * Definitions for the ETHERNET controllers + *************************************** + */ + +#ifndef __ETHER_H +#define __ETHER_H + +#include "quicc_simple.h" + +/* + * transmit BD's + */ +#define T_R 0x8000 /* ready bit */ +#define E_T_PAD 0x4000 /* short frame padding */ +#define T_W 0x2000 /* wrap bit */ +#define T_I 0x1000 /* interrupt on completion */ +#define T_L 0x0800 /* last in frame */ +#define T_TC 0x0400 /* transmit CRC (when last) */ + +#define T_DEF 0x0200 /* defer indication */ +#define T_HB 0x0100 /* heartbeat */ +#define T_LC 0x0080 /* error: late collision */ +#define T_RL 0x0040 /* error: retransmission limit */ +#define T_RC 0x003c /* retry count */ +#define T_UN 0x0002 /* error: underrun */ +#define T_CSL 0x0001 /* carier sense lost */ +#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL) + +/* + * receive BD's + */ +#define R_E 0x8000 /* buffer empty */ +#define R_W 0x2000 /* wrap bit */ +#define R_I 0x1000 /* interrupt on reception */ +#define R_L 0x0800 /* last BD in frame */ +#define R_F 0x0400 /* first BD in frame */ +#define R_M 0x0100 /* received because of promisc. mode */ + +#define R_LG 0x0020 /* frame too long */ +#define R_NO 0x0010 /* non-octet aligned */ +#define R_SH 0x0008 /* short frame */ +#define R_CR 0x0004 /* receive CRC error */ +#define R_OV 0x0002 /* receive overrun */ +#define R_CL 0x0001 /* collision */ +#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL) + + +/* + * ethernet interrupts + */ +#define ETHERNET_GRA 0x0080 /* graceful stop complete */ +#define ETHERNET_TXE 0x0010 /* transmit error */ +#define ETHERNET_RXF 0x0008 /* receive frame */ +#define ETHERNET_BSY 0x0004 /* busy condition */ +#define ETHERNET_TXB 0x0002 /* transmit buffer */ +#define ETHERNET_RXB 0x0001 /* receive buffer */ + +/* + * ethernet protocol specific mode register (PSMR) + */ +#define ETHER_HBC 0x8000 /* heartbeat checking */ +#define ETHER_FC 0x4000 /* force collision */ +#define ETHER_RSH 0x2000 /* receive short frames */ +#define ETHER_IAM 0x1000 /* individual address mode */ +#define ETHER_CRC_32 (0x2<<10) /* Enable CRC */ +#define ETHER_PRO 0x0200 /* promiscuous */ +#define ETHER_BRO 0x0100 /* broadcast address */ +#define ETHER_SBT 0x0080 /* stop backoff timer */ +#define ETHER_LPB 0x0040 /* Loop Back Mode */ +#define ETHER_SIP 0x0020 /* sample input pins */ +#define ETHER_LCW 0x0010 /* late collision window */ +#define ETHER_NIB_13 (0x0<<1) /* # of ignored bits 13 */ +#define ETHER_NIB_14 (0x1<<1) /* # of ignored bits 14 */ +#define ETHER_NIB_15 (0x2<<1) /* # of ignored bits 15 */ +#define ETHER_NIB_16 (0x3<<1) /* # of ignored bits 16 */ +#define ETHER_NIB_21 (0x4<<1) /* # of ignored bits 21 */ +#define ETHER_NIB_22 (0x5<<1) /* # of ignored bits 22 */ +#define ETHER_NIB_23 (0x6<<1) /* # of ignored bits 23 */ +#define ETHER_NIB_24 (0x7<<1) /* # of ignored bits 24 */ + +/* + * ethernet specific parameters + */ +#define CRC_WORD 4 /* Length in bytes of CRC */ +#define C_PRES 0xffffffff /* preform 32 bit CRC */ +#define C_MASK 0xdebb20e3 /* comply with 32 bit CRC */ +#define CRCEC 0x00000000 +#define ALEC 0x00000000 +#define DISFC 0x00000000 +#define PADS 0x00000000 +#define RET_LIM 0x000f /* retry 15 times to send a frame before interrupt */ +#define ETH_MFLR 0x05ee /* 1518 max frame size */ +#define MINFLR 0x0040 /* Minimum frame size 64 */ +#define MAXD1 0x05ee /* Max dma count 1518 */ +#define MAXD2 0x05ee +#define GADDR1 0x00000000 /* Clear group address */ +#define GADDR2 0x00000000 +#define GADDR3 0x00000000 +#define GADDR4 0x00000000 +#define P_PER 0x00000000 /*not used */ +#define IADDR1 0x00000000 /* Individual hash table not used */ +#define IADDR2 0x00000000 +#define IADDR3 0x00000000 +#define IADDR4 0x00000000 +#define TADDR_H 0x00000000 /* clear this regs */ +#define TADDR_M 0x00000000 +#define TADDR_L 0x00000000 + +/* SCC Parameter Ram */ +#define RFCR 0x18 /* normal operation */ +#define TFCR 0x18 /* normal operation */ +#define E_MRBLR 1518 /* Max ethernet frame length */ + +/* + * ethernet specific structure + */ +typedef union { + unsigned char b[6]; + struct { + unsigned short high; + unsigned short middl; + unsigned short low; + } w; +} ETHER_ADDR; + +typedef struct { + int max_frame_length; + int promisc_mode; + int reject_broadcast; + ETHER_ADDR phys_adr; +} ETHER_SPECIFIC; + +typedef struct { + ETHER_ADDR dst_addr; + ETHER_ADDR src_addr; + unsigned short type_or_len; + unsigned char data[1]; +} ETHER_FRAME; + +#define MAX_DATALEN 1500 +typedef struct { + ETHER_ADDR dst_addr; + ETHER_ADDR src_addr; + unsigned short type_or_len; + unsigned char data[MAX_DATALEN]; + unsigned char fcs[CRC_WORD]; +} ETHER_MAX_FRAME; + + +/* + * Internal ethernet function prototypes + */ +void ether_interrupt(int scc_num); +/* mleslie: debug */ +/* static void ethernet_rx_internal(int scc_num); */ +/* static void ethernet_tx_internal(int scc_num); */ + +/* + * User callable routines prototypes (ethernet specific) + */ +void ethernet_init(int scc_number, + alloc_routine *alloc_buffer, + free_routine *free_buffer, + store_rx_buffer_routine *store_rx_buffer, + handle_tx_error_routine *handle_tx_error, + handle_rx_error_routine *handle_rx_error, + handle_lost_error_routine *handle_lost_error, + ETHER_SPECIFIC *ether_spec); +int ethernet_tx(int scc_number, void *buf, int length); + +#endif + diff --git a/arch/m68knommu/include/asm/m68360_pram.h b/arch/m68knommu/include/asm/m68360_pram.h new file mode 100644 index 000000000000..e6088bbce93d --- /dev/null +++ b/arch/m68knommu/include/asm/m68360_pram.h @@ -0,0 +1,431 @@ +/*********************************** + * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ + *********************************** + * + *************************************** + * Definitions of the parameter area RAM. + * Note that different structures are overlaid + * at the same offsets for the different modes + * of operation. + *************************************** + */ + +#ifndef __PRAM_H +#define __PRAM_H + +/* Time slot assignment table */ +#define VALID_SLOT 0x8000 +#define WRAP_SLOT 0x4000 + +/***************************************************************** + Global Multichannel parameter RAM +*****************************************************************/ +struct global_multi_pram { + /* + * Global Multichannel parameter RAM + */ + unsigned long mcbase; /* Multichannel Base pointer */ + unsigned short qmcstate; /* Multichannel Controller state */ + unsigned short mrblr; /* Maximum Receive Buffer Length */ + unsigned short tx_s_ptr; /* TSTATx Pointer */ + unsigned short rxptr; /* Current Time slot entry in TSATRx */ + unsigned short grfthr; /* Global Receive frame threshold */ + unsigned short grfcnt; /* Global Receive Frame Count */ + unsigned long intbase; /* Multichannel Base address */ + unsigned long iintptr; /* Pointer to interrupt queue */ + unsigned short rx_s_ptr; /* TSTARx Pointer */ + + unsigned short txptr; /* Current Time slot entry in TSATTx */ + unsigned long c_mask32; /* CRC Constant (debb20e3) */ + unsigned short tsatrx[32]; /* Time Slot Assignment Table Rx */ + unsigned short tsattx[32]; /* Time Slot Assignment Table Tx */ + unsigned short c_mask16; /* CRC Constant (f0b8) */ +}; + +/***************************************************************** + Quicc32 HDLC parameter RAM +*****************************************************************/ +struct quicc32_pram { + + unsigned short tbase; /* Tx Buffer Descriptors Base Address */ + unsigned short chamr; /* Channel Mode Register */ + unsigned long tstate; /* Tx Internal State */ + unsigned long txintr; /* Tx Internal Data Pointer */ + unsigned short tbptr; /* Tx Buffer Descriptor Pointer */ + unsigned short txcntr; /* Tx Internal Byte Count */ + unsigned long tupack; /* (Tx Temp) */ + unsigned long zistate; /* Zero Insertion machine state */ + unsigned long tcrc; /* Temp Transmit CRC */ + unsigned short intmask; /* Channel's interrupt mask flags */ + unsigned short bdflags; + unsigned short rbase; /* Rx Buffer Descriptors Base Address */ + unsigned short mflr; /* Max Frame Length Register */ + unsigned long rstate; /* Rx Internal State */ + unsigned long rxintr; /* Rx Internal Data Pointer */ + unsigned short rbptr; /* Rx Buffer Descriptor Pointer */ + unsigned short rxbyc; /* Rx Internal Byte Count */ + unsigned long rpack; /* (Rx Temp) */ + unsigned long zdstate; /* Zero Deletion machine state */ + unsigned long rcrc; /* Temp Transmit CRC */ + unsigned short maxc; /* Max_length counter */ + unsigned short tmp_mb; /* Temp */ +}; + + +/***************************************************************** + HDLC parameter RAM +*****************************************************************/ + +struct hdlc_pram { + /* + * SCC parameter RAM + */ + unsigned short rbase; /* RX BD base address */ + unsigned short tbase; /* TX BD base address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rtemp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ + unsigned long rcrc; /* temp receive CRC */ + unsigned long tcrc; /* temp transmit CRC */ + + /* + * HDLC specific parameter RAM + */ + unsigned char RESERVED1[4]; /* Reserved area */ + unsigned long c_mask; /* CRC constant */ + unsigned long c_pres; /* CRC preset */ + unsigned short disfc; /* discarded frame counter */ + unsigned short crcec; /* CRC error counter */ + unsigned short abtsc; /* abort sequence counter */ + unsigned short nmarc; /* nonmatching address rx cnt */ + unsigned short retrc; /* frame retransmission cnt */ + unsigned short mflr; /* maximum frame length reg */ + unsigned short max_cnt; /* maximum length counter */ + unsigned short rfthr; /* received frames threshold */ + unsigned short rfcnt; /* received frames count */ + unsigned short hmask; /* user defined frm addr mask */ + unsigned short haddr1; /* user defined frm address 1 */ + unsigned short haddr2; /* user defined frm address 2 */ + unsigned short haddr3; /* user defined frm address 3 */ + unsigned short haddr4; /* user defined frm address 4 */ + unsigned short tmp; /* temp */ + unsigned short tmp_mb; /* temp */ +}; + + + +/***************************************************************** + UART parameter RAM +*****************************************************************/ + +/* + * bits in uart control characters table + */ +#define CC_INVALID 0x8000 /* control character is valid */ +#define CC_REJ 0x4000 /* don't store char in buffer */ +#define CC_CHAR 0x00ff /* control character */ + +/* UART */ +struct uart_pram { + /* + * SCC parameter RAM + */ + unsigned short rbase; /* RX BD base address */ + unsigned short tbase; /* TX BD base address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rx_temp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ + unsigned long rcrc; /* temp receive CRC */ + unsigned long tcrc; /* temp transmit CRC */ + + /* + * UART specific parameter RAM + */ + unsigned char RESERVED1[8]; /* Reserved area */ + unsigned short max_idl; /* maximum idle characters */ + unsigned short idlc; /* rx idle counter (internal) */ + unsigned short brkcr; /* break count register */ + + unsigned short parec; /* Rx parity error counter */ + unsigned short frmer; /* Rx framing error counter */ + unsigned short nosec; /* Rx noise counter */ + unsigned short brkec; /* Rx break character counter */ + unsigned short brkln; /* Reaceive break length */ + + unsigned short uaddr1; /* address character 1 */ + unsigned short uaddr2; /* address character 2 */ + unsigned short rtemp; /* temp storage */ + unsigned short toseq; /* Tx out of sequence char */ + unsigned short cc[8]; /* Rx control characters */ + unsigned short rccm; /* Rx control char mask */ + unsigned short rccr; /* Rx control char register */ + unsigned short rlbc; /* Receive last break char */ +}; + + + +/***************************************************************** + BISYNC parameter RAM +*****************************************************************/ + +struct bisync_pram { + /* + * SCC parameter RAM + */ + unsigned short rbase; /* RX BD base address */ + unsigned short tbase; /* TX BD base address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rtemp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ + unsigned long rcrc; /* temp receive CRC */ + unsigned long tcrc; /* temp transmit CRC */ + + /* + * BISYNC specific parameter RAM + */ + unsigned char RESERVED1[4]; /* Reserved area */ + unsigned long crcc; /* CRC Constant Temp Value */ + unsigned short prcrc; /* Preset Receiver CRC-16/LRC */ + unsigned short ptcrc; /* Preset Transmitter CRC-16/LRC */ + unsigned short parec; /* Receive Parity Error Counter */ + unsigned short bsync; /* BISYNC SYNC Character */ + unsigned short bdle; /* BISYNC DLE Character */ + unsigned short cc[8]; /* Rx control characters */ + unsigned short rccm; /* Receive Control Character Mask */ +}; + +/***************************************************************** + IOM2 parameter RAM + (overlaid on tx bd[5] of SCC channel[2]) +*****************************************************************/ +struct iom2_pram { + unsigned short ci_data; /* ci data */ + unsigned short monitor_data; /* monitor data */ + unsigned short tstate; /* transmitter state */ + unsigned short rstate; /* receiver state */ +}; + +/***************************************************************** + SPI/SMC parameter RAM + (overlaid on tx bd[6,7] of SCC channel[2]) +*****************************************************************/ + +#define SPI_R 0x8000 /* Ready bit in BD */ + +struct spi_pram { + unsigned short rbase; /* Rx BD Base Address */ + unsigned short tbase; /* Tx BD Base Address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rtemp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ +}; + +struct smc_uart_pram { + unsigned short rbase; /* Rx BD Base Address */ + unsigned short tbase; /* Tx BD Base Address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rtemp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ + unsigned short max_idl; /* Maximum IDLE Characters */ + unsigned short idlc; /* Temporary IDLE Counter */ + unsigned short brkln; /* Last Rx Break Length */ + unsigned short brkec; /* Rx Break Condition Counter */ + unsigned short brkcr; /* Break Count Register (Tx) */ + unsigned short r_mask; /* Temporary bit mask */ +}; + +struct smc_trnsp_pram { + unsigned short rbase; /* rx BD Base Address */ + unsigned short tbase; /* Tx BD Base Address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rtemp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ + unsigned short reserved[5]; /* Reserved */ +}; + +struct idma_pram { + unsigned short ibase; /* IDMA BD Base Address */ + unsigned short ibptr; /* IDMA buffer descriptor pointer */ + unsigned long istate; /* IDMA internal state */ + unsigned long itemp; /* IDMA temp */ +}; + +struct ethernet_pram { + /* + * SCC parameter RAM + */ + unsigned short rbase; /* RX BD base address */ + unsigned short tbase; /* TX BD base address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rtemp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ + unsigned long rcrc; /* temp receive CRC */ + unsigned long tcrc; /* temp transmit CRC */ + + /* + * ETHERNET specific parameter RAM + */ + unsigned long c_pres; /* preset CRC */ + unsigned long c_mask; /* constant mask for CRC */ + unsigned long crcec; /* CRC error counter */ + unsigned long alec; /* alighnment error counter */ + unsigned long disfc; /* discard frame counter */ + unsigned short pads; /* short frame PAD characters */ + unsigned short ret_lim; /* retry limit threshold */ + unsigned short ret_cnt; /* retry limit counter */ + unsigned short mflr; /* maximum frame length reg */ + unsigned short minflr; /* minimum frame length reg */ + unsigned short maxd1; /* maximum DMA1 length reg */ + unsigned short maxd2; /* maximum DMA2 length reg */ + unsigned short maxd; /* rx max DMA */ + unsigned short dma_cnt; /* rx dma counter */ + unsigned short max_b; /* max bd byte count */ + unsigned short gaddr1; /* group address filter 1 */ + unsigned short gaddr2; /* group address filter 2 */ + unsigned short gaddr3; /* group address filter 3 */ + unsigned short gaddr4; /* group address filter 4 */ + unsigned long tbuf0_data0; /* save area 0 - current frm */ + unsigned long tbuf0_data1; /* save area 1 - current frm */ + unsigned long tbuf0_rba0; + unsigned long tbuf0_crc; + unsigned short tbuf0_bcnt; + union { + unsigned char b[6]; + struct { + unsigned short high; + unsigned short middl; + unsigned short low; + } w; + } paddr; + unsigned short p_per; /* persistence */ + unsigned short rfbd_ptr; /* rx first bd pointer */ + unsigned short tfbd_ptr; /* tx first bd pointer */ + unsigned short tlbd_ptr; /* tx last bd pointer */ + unsigned long tbuf1_data0; /* save area 0 - next frame */ + unsigned long tbuf1_data1; /* save area 1 - next frame */ + unsigned long tbuf1_rba0; + unsigned long tbuf1_crc; + unsigned short tbuf1_bcnt; + unsigned short tx_len; /* tx frame length counter */ + unsigned short iaddr1; /* individual address filter 1*/ + unsigned short iaddr2; /* individual address filter 2*/ + unsigned short iaddr3; /* individual address filter 3*/ + unsigned short iaddr4; /* individual address filter 4*/ + unsigned short boff_cnt; /* back-off counter */ + unsigned short taddr_h; /* temp address (MSB) */ + unsigned short taddr_m; /* temp address */ + unsigned short taddr_l; /* temp address (LSB) */ +}; + +struct transparent_pram { + /* + * SCC parameter RAM + */ + unsigned short rbase; /* RX BD base address */ + unsigned short tbase; /* TX BD base address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rtemp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ + unsigned long rcrc; /* temp receive CRC */ + unsigned long tcrc; /* temp transmit CRC */ + + /* + * TRANSPARENT specific parameter RAM + */ + unsigned long crc_p; /* CRC Preset */ + unsigned long crc_c; /* CRC constant */ +}; + +struct timer_pram { + /* + * RISC timers parameter RAM + */ + unsigned short tm_base; /* RISC timer table base adr */ + unsigned short tm_ptr; /* RISC timer table pointer */ + unsigned short r_tmr; /* RISC timer mode register */ + unsigned short r_tmv; /* RISC timer valid register */ + unsigned long tm_cmd; /* RISC timer cmd register */ + unsigned long tm_cnt; /* RISC timer internal cnt */ +}; + +#endif diff --git a/arch/m68knommu/include/asm/m68360_quicc.h b/arch/m68knommu/include/asm/m68360_quicc.h new file mode 100644 index 000000000000..6d40f4d18e10 --- /dev/null +++ b/arch/m68knommu/include/asm/m68360_quicc.h @@ -0,0 +1,362 @@ +/*********************************** + * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ + *********************************** + * + *************************************** + * Definitions of QUICC memory structures + *************************************** + */ + +#ifndef __M68360_QUICC_H +#define __M68360_QUICC_H + +/* + * include registers and + * parameter ram definitions files + */ +#include +#include + + + +/* Buffer Descriptors */ +typedef struct quicc_bd { + volatile unsigned short status; + volatile unsigned short length; + volatile unsigned char *buf; /* WARNING: This is only true if *char is 32 bits */ +} QUICC_BD; + + +#ifdef MOTOROLA_ORIGINAL +struct user_data { + /* BASE + 0x000: user data memory */ + volatile unsigned char udata_bd_ucode[0x400]; /*user data bd's Ucode*/ + volatile unsigned char udata_bd[0x200]; /*user data Ucode */ + volatile unsigned char ucode_ext[0x100]; /*Ucode Extention ram */ + volatile unsigned char RESERVED1[0x500]; /* Reserved area */ +}; +#else +struct user_data { + /* BASE + 0x000: user data memory */ + volatile unsigned char udata_bd_ucode[0x400]; /* user data, bds, Ucode*/ + volatile unsigned char udata_bd1[0x200]; /* user, bds */ + volatile unsigned char ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */ + volatile unsigned char udata_bd2[0x100]; /* user, bds */ + volatile unsigned char RESERVED1[0x400]; /* Reserved area */ +}; +#endif + + +/* + * internal ram + */ +typedef struct quicc { + union { + struct quicc32_pram ch_pram_tbl[32]; /* 32*64(bytes) per channel */ + struct user_data u; + }ch_or_u; /* multipul or user space */ + + /* BASE + 0xc00: PARAMETER RAM */ + union { + struct scc_pram { + union { + struct hdlc_pram h; + struct uart_pram u; + struct bisync_pram b; + struct transparent_pram t; + unsigned char RESERVED66[0x70]; + } pscc; /* scc parameter area (protocol dependent) */ + union { + struct { + unsigned char RESERVED70[0x10]; + struct spi_pram spi; + unsigned char RESERVED72[0x8]; + struct timer_pram timer; + } timer_spi; + struct { + struct idma_pram idma; + unsigned char RESERVED67[0x4]; + union { + struct smc_uart_pram u; + struct smc_trnsp_pram t; + } psmc; + } idma_smc; + } pothers; + } scc; + struct ethernet_pram enet_scc; + struct global_multi_pram m; + unsigned char pr[0x100]; + } pram[4]; + + /* reserved */ + + /* BASE + 0x1000: INTERNAL REGISTERS */ + /* SIM */ + volatile unsigned long sim_mcr; /* module configuration reg */ + volatile unsigned short sim_simtr; /* module test register */ + volatile unsigned char RESERVED2[0x2]; /* Reserved area */ + volatile unsigned char sim_avr; /* auto vector reg */ + volatile unsigned char sim_rsr; /* reset status reg */ + volatile unsigned char RESERVED3[0x2]; /* Reserved area */ + volatile unsigned char sim_clkocr; /* CLCO control register */ + volatile unsigned char RESERVED62[0x3]; /* Reserved area */ + volatile unsigned short sim_pllcr; /* PLL control register */ + volatile unsigned char RESERVED63[0x2]; /* Reserved area */ + volatile unsigned short sim_cdvcr; /* Clock devider control register */ + volatile unsigned short sim_pepar; /* Port E pin assignment register */ + volatile unsigned char RESERVED64[0xa]; /* Reserved area */ + volatile unsigned char sim_sypcr; /* system protection control*/ + volatile unsigned char sim_swiv; /* software interrupt vector*/ + volatile unsigned char RESERVED6[0x2]; /* Reserved area */ + volatile unsigned short sim_picr; /* periodic interrupt control reg */ + volatile unsigned char RESERVED7[0x2]; /* Reserved area */ + volatile unsigned short sim_pitr; /* periodic interrupt timing reg */ + volatile unsigned char RESERVED8[0x3]; /* Reserved area */ + volatile unsigned char sim_swsr; /* software service */ + volatile unsigned long sim_bkar; /* breakpoint address register*/ + volatile unsigned long sim_bkcr; /* breakpoint control register*/ + volatile unsigned char RESERVED10[0x8]; /* Reserved area */ + /* MEMC */ + volatile unsigned long memc_gmr; /* Global memory register */ + volatile unsigned short memc_mstat; /* MEMC status register */ + volatile unsigned char RESERVED11[0xa]; /* Reserved area */ + volatile unsigned long memc_br0; /* base register 0 */ + volatile unsigned long memc_or0; /* option register 0 */ + volatile unsigned char RESERVED12[0x8]; /* Reserved area */ + volatile unsigned long memc_br1; /* base register 1 */ + volatile unsigned long memc_or1; /* option register 1 */ + volatile unsigned char RESERVED13[0x8]; /* Reserved area */ + volatile unsigned long memc_br2; /* base register 2 */ + volatile unsigned long memc_or2; /* option register 2 */ + volatile unsigned char RESERVED14[0x8]; /* Reserved area */ + volatile unsigned long memc_br3; /* base register 3 */ + volatile unsigned long memc_or3; /* option register 3 */ + volatile unsigned char RESERVED15[0x8]; /* Reserved area */ + volatile unsigned long memc_br4; /* base register 3 */ + volatile unsigned long memc_or4; /* option register 3 */ + volatile unsigned char RESERVED16[0x8]; /* Reserved area */ + volatile unsigned long memc_br5; /* base register 3 */ + volatile unsigned long memc_or5; /* option register 3 */ + volatile unsigned char RESERVED17[0x8]; /* Reserved area */ + volatile unsigned long memc_br6; /* base register 3 */ + volatile unsigned long memc_or6; /* option register 3 */ + volatile unsigned char RESERVED18[0x8]; /* Reserved area */ + volatile unsigned long memc_br7; /* base register 3 */ + volatile unsigned long memc_or7; /* option register 3 */ + volatile unsigned char RESERVED9[0x28]; /* Reserved area */ + /* TEST */ + volatile unsigned short test_tstmra; /* master shift a */ + volatile unsigned short test_tstmrb; /* master shift b */ + volatile unsigned short test_tstsc; /* shift count */ + volatile unsigned short test_tstrc; /* repetition counter */ + volatile unsigned short test_creg; /* control */ + volatile unsigned short test_dreg; /* destributed register */ + volatile unsigned char RESERVED58[0x404]; /* Reserved area */ + /* IDMA1 */ + volatile unsigned short idma_iccr; /* channel configuration reg*/ + volatile unsigned char RESERVED19[0x2]; /* Reserved area */ + volatile unsigned short idma1_cmr; /* dma mode reg */ + volatile unsigned char RESERVED68[0x2]; /* Reserved area */ + volatile unsigned long idma1_sapr; /* dma source addr ptr */ + volatile unsigned long idma1_dapr; /* dma destination addr ptr */ + volatile unsigned long idma1_bcr; /* dma byte count reg */ + volatile unsigned char idma1_fcr; /* function code reg */ + volatile unsigned char RESERVED20; /* Reserved area */ + volatile unsigned char idma1_cmar; /* channel mask reg */ + volatile unsigned char RESERVED21; /* Reserved area */ + volatile unsigned char idma1_csr; /* channel status reg */ + volatile unsigned char RESERVED22[0x3]; /* Reserved area */ + /* SDMA */ + volatile unsigned char sdma_sdsr; /* status reg */ + volatile unsigned char RESERVED23; /* Reserved area */ + volatile unsigned short sdma_sdcr; /* configuration reg */ + volatile unsigned long sdma_sdar; /* address reg */ + /* IDMA2 */ + volatile unsigned char RESERVED69[0x2]; /* Reserved area */ + volatile unsigned short idma2_cmr; /* dma mode reg */ + volatile unsigned long idma2_sapr; /* dma source addr ptr */ + volatile unsigned long idma2_dapr; /* dma destination addr ptr */ + volatile unsigned long idma2_bcr; /* dma byte count reg */ + volatile unsigned char idma2_fcr; /* function code reg */ + volatile unsigned char RESERVED24; /* Reserved area */ + volatile unsigned char idma2_cmar; /* channel mask reg */ + volatile unsigned char RESERVED25; /* Reserved area */ + volatile unsigned char idma2_csr; /* channel status reg */ + volatile unsigned char RESERVED26[0x7]; /* Reserved area */ + /* Interrupt Controller */ + volatile unsigned long intr_cicr; /* CP interrupt configuration reg*/ + volatile unsigned long intr_cipr; /* CP interrupt pending reg */ + volatile unsigned long intr_cimr; /* CP interrupt mask reg */ + volatile unsigned long intr_cisr; /* CP interrupt in service reg*/ + /* Parallel I/O */ + volatile unsigned short pio_padir; /* port A data direction reg */ + volatile unsigned short pio_papar; /* port A pin assignment reg */ + volatile unsigned short pio_paodr; /* port A open drain reg */ + volatile unsigned short pio_padat; /* port A data register */ + volatile unsigned char RESERVED28[0x8]; /* Reserved area */ + volatile unsigned short pio_pcdir; /* port C data direction reg*/ + volatile unsigned short pio_pcpar; /* port C pin assignment reg*/ + volatile unsigned short pio_pcso; /* port C special options */ + volatile unsigned short pio_pcdat; /* port C data register */ + volatile unsigned short pio_pcint; /* port C interrupt cntrl reg */ + volatile unsigned char RESERVED29[0x16]; /* Reserved area */ + /* Timer */ + volatile unsigned short timer_tgcr; /* timer global configuration reg */ + volatile unsigned char RESERVED30[0xe]; /* Reserved area */ + volatile unsigned short timer_tmr1; /* timer 1 mode reg */ + volatile unsigned short timer_tmr2; /* timer 2 mode reg */ + volatile unsigned short timer_trr1; /* timer 1 referance reg */ + volatile unsigned short timer_trr2; /* timer 2 referance reg */ + volatile unsigned short timer_tcr1; /* timer 1 capture reg */ + volatile unsigned short timer_tcr2; /* timer 2 capture reg */ + volatile unsigned short timer_tcn1; /* timer 1 counter reg */ + volatile unsigned short timer_tcn2; /* timer 2 counter reg */ + volatile unsigned short timer_tmr3; /* timer 3 mode reg */ + volatile unsigned short timer_tmr4; /* timer 4 mode reg */ + volatile unsigned short timer_trr3; /* timer 3 referance reg */ + volatile unsigned short timer_trr4; /* timer 4 referance reg */ + volatile unsigned short timer_tcr3; /* timer 3 capture reg */ + volatile unsigned short timer_tcr4; /* timer 4 capture reg */ + volatile unsigned short timer_tcn3; /* timer 3 counter reg */ + volatile unsigned short timer_tcn4; /* timer 4 counter reg */ + volatile unsigned short timer_ter1; /* timer 1 event reg */ + volatile unsigned short timer_ter2; /* timer 2 event reg */ + volatile unsigned short timer_ter3; /* timer 3 event reg */ + volatile unsigned short timer_ter4; /* timer 4 event reg */ + volatile unsigned char RESERVED34[0x8]; /* Reserved area */ + /* CP */ + volatile unsigned short cp_cr; /* command register */ + volatile unsigned char RESERVED35[0x2]; /* Reserved area */ + volatile unsigned short cp_rccr; /* main configuration reg */ + volatile unsigned char RESERVED37; /* Reserved area */ + volatile unsigned char cp_rmds; /* development support status reg */ + volatile unsigned long cp_rmdr; /* development support control reg */ + volatile unsigned short cp_rctr1; /* ram break register 1 */ + volatile unsigned short cp_rctr2; /* ram break register 2 */ + volatile unsigned short cp_rctr3; /* ram break register 3 */ + volatile unsigned short cp_rctr4; /* ram break register 4 */ + volatile unsigned char RESERVED59[0x2]; /* Reserved area */ + volatile unsigned short cp_rter; /* RISC timers event reg */ + volatile unsigned char RESERVED38[0x2]; /* Reserved area */ + volatile unsigned short cp_rtmr; /* RISC timers mask reg */ + volatile unsigned char RESERVED39[0x14]; /* Reserved area */ + /* BRG */ + union { + volatile unsigned long l; + struct { + volatile unsigned short BRGC_RESERV:14; + volatile unsigned short rst:1; + volatile unsigned short en:1; + volatile unsigned short extc:2; + volatile unsigned short atb:1; + volatile unsigned short cd:12; + volatile unsigned short div16:1; + } b; + } brgc[4]; /* BRG1-BRG4 configuration regs*/ + /* SCC registers */ + struct scc_regs { + union { + struct { + /* Low word. */ + volatile unsigned short GSMR_RESERV2:1; + volatile unsigned short edge:2; + volatile unsigned short tci:1; + volatile unsigned short tsnc:2; + volatile unsigned short rinv:1; + volatile unsigned short tinv:1; + volatile unsigned short tpl:3; + volatile unsigned short tpp:2; + volatile unsigned short tend:1; + volatile unsigned short tdcr:2; + volatile unsigned short rdcr:2; + volatile unsigned short renc:3; + volatile unsigned short tenc:3; + volatile unsigned short diag:2; + volatile unsigned short enr:1; + volatile unsigned short ent:1; + volatile unsigned short mode:4; + /* High word. */ + volatile unsigned short GSMR_RESERV1:14; + volatile unsigned short pri:1; + volatile unsigned short gde:1; + volatile unsigned short tcrc:2; + volatile unsigned short revd:1; + volatile unsigned short trx:1; + volatile unsigned short ttx:1; + volatile unsigned short cdp:1; + volatile unsigned short ctsp:1; + volatile unsigned short cds:1; + volatile unsigned short ctss:1; + volatile unsigned short tfl:1; + volatile unsigned short rfw:1; + volatile unsigned short txsy:1; + volatile unsigned short synl:2; + volatile unsigned short rtsm:1; + volatile unsigned short rsyn:1; + } b; + struct { + volatile unsigned long low; + volatile unsigned long high; + } w; + } scc_gsmr; /* SCC general mode reg */ + volatile unsigned short scc_psmr; /* protocol specific mode reg */ + volatile unsigned char RESERVED42[0x2]; /* Reserved area */ + volatile unsigned short scc_todr; /* SCC transmit on demand */ + volatile unsigned short scc_dsr; /* SCC data sync reg */ + volatile unsigned short scc_scce; /* SCC event reg */ + volatile unsigned char RESERVED43[0x2];/* Reserved area */ + volatile unsigned short scc_sccm; /* SCC mask reg */ + volatile unsigned char RESERVED44[0x1];/* Reserved area */ + volatile unsigned char scc_sccs; /* SCC status reg */ + volatile unsigned char RESERVED45[0x8]; /* Reserved area */ + } scc_regs[4]; + /* SMC */ + struct smc_regs { + volatile unsigned char RESERVED46[0x2]; /* Reserved area */ + volatile unsigned short smc_smcmr; /* SMC mode reg */ + volatile unsigned char RESERVED60[0x2]; /* Reserved area */ + volatile unsigned char smc_smce; /* SMC event reg */ + volatile unsigned char RESERVED47[0x3]; /* Reserved area */ + volatile unsigned char smc_smcm; /* SMC mask reg */ + volatile unsigned char RESERVED48[0x5]; /* Reserved area */ + } smc_regs[2]; + /* SPI */ + volatile unsigned short spi_spmode; /* SPI mode reg */ + volatile unsigned char RESERVED51[0x4]; /* Reserved area */ + volatile unsigned char spi_spie; /* SPI event reg */ + volatile unsigned char RESERVED52[0x3]; /* Reserved area */ + volatile unsigned char spi_spim; /* SPI mask reg */ + volatile unsigned char RESERVED53[0x2]; /* Reserved area */ + volatile unsigned char spi_spcom; /* SPI command reg */ + volatile unsigned char RESERVED54[0x4]; /* Reserved area */ + /* PIP */ + volatile unsigned short pip_pipc; /* pip configuration reg */ + volatile unsigned char RESERVED65[0x2]; /* Reserved area */ + volatile unsigned short pip_ptpr; /* pip timing parameters reg */ + volatile unsigned long pip_pbdir; /* port b data direction reg */ + volatile unsigned long pip_pbpar; /* port b pin assignment reg */ + volatile unsigned long pip_pbodr; /* port b open drain reg */ + volatile unsigned long pip_pbdat; /* port b data reg */ + volatile unsigned char RESERVED71[0x18]; /* Reserved area */ + /* Serial Interface */ + volatile unsigned long si_simode; /* SI mode register */ + volatile unsigned char si_sigmr; /* SI global mode register */ + volatile unsigned char RESERVED55; /* Reserved area */ + volatile unsigned char si_sistr; /* SI status register */ + volatile unsigned char si_sicmr; /* SI command register */ + volatile unsigned char RESERVED56[0x4]; /* Reserved area */ + volatile unsigned long si_sicr; /* SI clock routing */ + volatile unsigned long si_sirp; /* SI ram pointers */ + volatile unsigned char RESERVED57[0xc]; /* Reserved area */ + volatile unsigned short si_siram[0x80]; /* SI routing ram */ +} QUICC; + +#endif + +/* + * Local variables: + * c-indent-level: 4 + * c-basic-offset: 4 + * tab-width: 4 + * End: + */ diff --git a/arch/m68knommu/include/asm/m68360_regs.h b/arch/m68knommu/include/asm/m68360_regs.h new file mode 100644 index 000000000000..d57217ca4f27 --- /dev/null +++ b/arch/m68knommu/include/asm/m68360_regs.h @@ -0,0 +1,408 @@ +/*********************************** + * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $ + *********************************** + * + *************************************** + * Definitions of the QUICC registers + *************************************** + */ + +#ifndef __REGISTERS_H +#define __REGISTERS_H + +#define CLEAR_BIT(x, bit) x =bit + +/***************************************************************** + Command Register +*****************************************************************/ + +/* bit fields within command register */ +#define SOFTWARE_RESET 0x8000 +#define CMD_OPCODE 0x0f00 +#define CMD_CHANNEL 0x00f0 +#define CMD_FLAG 0x0001 + +/* general command opcodes */ +#define INIT_RXTX_PARAMS 0x0000 +#define INIT_RX_PARAMS 0x0100 +#define INIT_TX_PARAMS 0x0200 +#define ENTER_HUNT_MODE 0x0300 +#define STOP_TX 0x0400 +#define GR_STOP_TX 0x0500 +#define RESTART_TX 0x0600 +#define CLOSE_RX_BD 0x0700 +#define SET_ENET_GROUP 0x0800 +#define RESET_ENET_GROUP 0x0900 + +/* quicc32 CP commands */ +#define STOP_TX_32 0x0e00 /*add chan# bits 2-6 */ +#define ENTER_HUNT_MODE_32 0x1e00 + +/* quicc32 mask/event SCC register */ +#define GOV 0x01 +#define GUN 0x02 +#define GINT 0x04 +#define IQOV 0x08 + + +/* Timer commands */ +#define SET_TIMER 0x0800 + +/* Multi channel Interrupt structure */ +#define INTR_VALID 0x8000 /* Valid interrupt entry */ +#define INTR_WRAP 0x4000 /* Wrap bit in the interrupt entry table */ +#define INTR_CH_NU 0x07c0 /* Channel Num in interrupt table */ +#define INTR_MASK_BITS 0x383f + +/* + * General SCC mode register (GSMR) + */ + +#define MODE_HDLC 0x0 +#define MODE_APPLE_TALK 0x2 +#define MODE_SS7 0x3 +#define MODE_UART 0x4 +#define MODE_PROFIBUS 0x5 +#define MODE_ASYNC_HDLC 0x6 +#define MODE_V14 0x7 +#define MODE_BISYNC 0x8 +#define MODE_DDCMP 0x9 +#define MODE_MULTI_CHANNEL 0xa +#define MODE_ETHERNET 0xc + +#define DIAG_NORMAL 0x0 +#define DIAG_LOCAL_LPB 0x1 +#define DIAG_AUTO_ECHO 0x2 +#define DIAG_LBP_ECHO 0x3 + +/* For RENC and TENC fields in GSMR */ +#define ENC_NRZ 0x0 +#define ENC_NRZI 0x1 +#define ENC_FM0 0x2 +#define ENC_MANCH 0x4 +#define ENC_DIFF_MANC 0x6 + +/* For TDCR and RDCR fields in GSMR */ +#define CLOCK_RATE_1 0x0 +#define CLOCK_RATE_8 0x1 +#define CLOCK_RATE_16 0x2 +#define CLOCK_RATE_32 0x3 + +#define TPP_00 0x0 +#define TPP_10 0x1 +#define TPP_01 0x2 +#define TPP_11 0x3 + +#define TPL_NO 0x0 +#define TPL_8 0x1 +#define TPL_16 0x2 +#define TPL_32 0x3 +#define TPL_48 0x4 +#define TPL_64 0x5 +#define TPL_128 0x6 + +#define TSNC_INFINITE 0x0 +#define TSNC_14_65 0x1 +#define TSNC_4_15 0x2 +#define TSNC_3_1 0x3 + +#define EDGE_BOTH 0x0 +#define EDGE_POS 0x1 +#define EDGE_NEG 0x2 +#define EDGE_NO 0x3 + +#define SYNL_NO 0x0 +#define SYNL_4 0x1 +#define SYNL_8 0x2 +#define SYNL_16 0x3 + +#define TCRC_CCITT16 0x0 +#define TCRC_CRC16 0x1 +#define TCRC_CCITT32 0x2 + + +/***************************************************************** + TODR (Transmit on demand) Register +*****************************************************************/ +#define TODR_TOD 0x8000 /* Transmit on demand */ + + +/***************************************************************** + CICR register settings +*****************************************************************/ + +/* note that relative irq priorities of the SCCs can be reordered + * if desired - see p. 7-377 of the MC68360UM */ +#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ +#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ +#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ +#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ + +#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ +#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ +#define CICR_VBA_MASK ((uint)0x000000e0) /* Vector Base Address */ +#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ + + +/***************************************************************** + Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379) +*****************************************************************/ + +#define INTR_PIO_PC0 0x80000000 /* parallel I/O C bit 0 */ +#define INTR_SCC1 0x40000000 /* SCC port 1 */ +#define INTR_SCC2 0x20000000 /* SCC port 2 */ +#define INTR_SCC3 0x10000000 /* SCC port 3 */ +#define INTR_SCC4 0x08000000 /* SCC port 4 */ +#define INTR_PIO_PC1 0x04000000 /* parallel i/o C bit 1 */ +#define INTR_TIMER1 0x02000000 /* timer 1 */ +#define INTR_PIO_PC2 0x01000000 /* parallel i/o C bit 2 */ +#define INTR_PIO_PC3 0x00800000 /* parallel i/o C bit 3 */ +#define INTR_SDMA_BERR 0x00400000 /* SDMA channel bus error */ +#define INTR_DMA1 0x00200000 /* idma 1 */ +#define INTR_DMA2 0x00100000 /* idma 2 */ +#define INTR_TIMER2 0x00040000 /* timer 2 */ +#define INTR_CP_TIMER 0x00020000 /* CP timer */ +#define INTR_PIP_STATUS 0x00010000 /* PIP status */ +#define INTR_PIO_PC4 0x00008000 /* parallel i/o C bit 4 */ +#define INTR_PIO_PC5 0x00004000 /* parallel i/o C bit 5 */ +#define INTR_TIMER3 0x00001000 /* timer 3 */ +#define INTR_PIO_PC6 0x00000800 /* parallel i/o C bit 6 */ +#define INTR_PIO_PC7 0x00000400 /* parallel i/o C bit 7 */ +#define INTR_PIO_PC8 0x00000200 /* parallel i/o C bit 8 */ +#define INTR_TIMER4 0x00000080 /* timer 4 */ +#define INTR_PIO_PC9 0x00000040 /* parallel i/o C bit 9 */ +#define INTR_SCP 0x00000020 /* SCP */ +#define INTR_SMC1 0x00000010 /* SMC 1 */ +#define INTR_SMC2 0x00000008 /* SMC 2 */ +#define INTR_PIO_PC10 0x00000004 /* parallel i/o C bit 10 */ +#define INTR_PIO_PC11 0x00000002 /* parallel i/o C bit 11 */ +#define INTR_ERR 0x00000001 /* error */ + + +/***************************************************************** + CPM Interrupt vector encodings (MC68360UM p. 7-376) +*****************************************************************/ + +#define CPMVEC_NR 32 +#define CPMVEC_PIO_PC0 0x1f +#define CPMVEC_SCC1 0x1e +#define CPMVEC_SCC2 0x1d +#define CPMVEC_SCC3 0x1c +#define CPMVEC_SCC4 0x1b +#define CPMVEC_PIO_PC1 0x1a +#define CPMVEC_TIMER1 0x19 +#define CPMVEC_PIO_PC2 0x18 +#define CPMVEC_PIO_PC3 0x17 +#define CPMVEC_SDMA_CB_ERR 0x16 +#define CPMVEC_IDMA1 0x15 +#define CPMVEC_IDMA2 0x14 +#define CPMVEC_RESERVED3 0x13 +#define CPMVEC_TIMER2 0x12 +#define CPMVEC_RISCTIMER 0x11 +#define CPMVEC_RESERVED2 0x10 +#define CPMVEC_PIO_PC4 0x0f +#define CPMVEC_PIO_PC5 0x0e +#define CPMVEC_TIMER3 0x0c +#define CPMVEC_PIO_PC6 0x0b +#define CPMVEC_PIO_PC7 0x0a +#define CPMVEC_PIO_PC8 0x09 +#define CPMVEC_RESERVED1 0x08 +#define CPMVEC_TIMER4 0x07 +#define CPMVEC_PIO_PC9 0x06 +#define CPMVEC_SPI 0x05 +#define CPMVEC_SMC1 0x04 +#define CPMVEC_SMC2 0x03 +#define CPMVEC_PIO_PC10 0x02 +#define CPMVEC_PIO_PC11 0x01 +#define CPMVEC_ERROR 0x00 + +/* #define CPMVEC_PIO_PC0 ((ushort)0x1f) */ +/* #define CPMVEC_SCC1 ((ushort)0x1e) */ +/* #define CPMVEC_SCC2 ((ushort)0x1d) */ +/* #define CPMVEC_SCC3 ((ushort)0x1c) */ +/* #define CPMVEC_SCC4 ((ushort)0x1b) */ +/* #define CPMVEC_PIO_PC1 ((ushort)0x1a) */ +/* #define CPMVEC_TIMER1 ((ushort)0x19) */ +/* #define CPMVEC_PIO_PC2 ((ushort)0x18) */ +/* #define CPMVEC_PIO_PC3 ((ushort)0x17) */ +/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */ +/* #define CPMVEC_IDMA1 ((ushort)0x15) */ +/* #define CPMVEC_IDMA2 ((ushort)0x14) */ +/* #define CPMVEC_RESERVED3 ((ushort)0x13) */ +/* #define CPMVEC_TIMER2 ((ushort)0x12) */ +/* #define CPMVEC_RISCTIMER ((ushort)0x11) */ +/* #define CPMVEC_RESERVED2 ((ushort)0x10) */ +/* #define CPMVEC_PIO_PC4 ((ushort)0x0f) */ +/* #define CPMVEC_PIO_PC5 ((ushort)0x0e) */ +/* #define CPMVEC_TIMER3 ((ushort)0x0c) */ +/* #define CPMVEC_PIO_PC6 ((ushort)0x0b) */ +/* #define CPMVEC_PIO_PC7 ((ushort)0x0a) */ +/* #define CPMVEC_PIO_PC8 ((ushort)0x09) */ +/* #define CPMVEC_RESERVED1 ((ushort)0x08) */ +/* #define CPMVEC_TIMER4 ((ushort)0x07) */ +/* #define CPMVEC_PIO_PC9 ((ushort)0x06) */ +/* #define CPMVEC_SPI ((ushort)0x05) */ +/* #define CPMVEC_SMC1 ((ushort)0x04) */ +/* #define CPMVEC_SMC2 ((ushort)0x03) */ +/* #define CPMVEC_PIO_PC10 ((ushort)0x02) */ +/* #define CPMVEC_PIO_PC11 ((ushort)0x01) */ +/* #define CPMVEC_ERROR ((ushort)0x00) */ + + +/***************************************************************** + * PIO control registers + *****************************************************************/ + +/* Port A - See 360UM p. 7-358 + * + * Note that most of these pins have alternate functions + */ + + +/* The macros are nice, but there are all sorts of references to 1-indexed + * facilities on the 68360... */ +/* #define PA_RXD(n) ((ushort)(0x01<<(2*n))) */ +/* #define PA_TXD(n) ((ushort)(0x02<<(2*n))) */ + +#define PA_RXD1 ((ushort)0x0001) +#define PA_TXD1 ((ushort)0x0002) +#define PA_RXD2 ((ushort)0x0004) +#define PA_TXD2 ((ushort)0x0008) +#define PA_RXD3 ((ushort)0x0010) +#define PA_TXD3 ((ushort)0x0020) +#define PA_RXD4 ((ushort)0x0040) +#define PA_TXD4 ((ushort)0x0080) + +#define PA_CLK1 ((ushort)0x0100) +#define PA_CLK2 ((ushort)0x0200) +#define PA_CLK3 ((ushort)0x0400) +#define PA_CLK4 ((ushort)0x0800) +#define PA_CLK5 ((ushort)0x1000) +#define PA_CLK6 ((ushort)0x2000) +#define PA_CLK7 ((ushort)0x4000) +#define PA_CLK8 ((ushort)0x8000) + + +/* Port B - See 360UM p. 7-362 + */ + + +/* Port C - See 360UM p. 7-365 + */ + +#define PC_RTS1 ((ushort)0x0001) +#define PC_RTS2 ((ushort)0x0002) +#define PC__RTS3 ((ushort)0x0004) /* !RTS3 */ +#define PC__RTS4 ((ushort)0x0008) /* !RTS4 */ + +#define PC_CTS1 ((ushort)0x0010) +#define PC_CD1 ((ushort)0x0020) +#define PC_CTS2 ((ushort)0x0040) +#define PC_CD2 ((ushort)0x0080) +#define PC_CTS3 ((ushort)0x0100) +#define PC_CD3 ((ushort)0x0200) +#define PC_CTS4 ((ushort)0x0400) +#define PC_CD4 ((ushort)0x0800) + + + +/***************************************************************** + chip select option register +*****************************************************************/ +#define DTACK 0xe000 +#define ADR_MASK 0x1ffc +#define RDWR_MASK 0x0002 +#define FC_MASK 0x0001 + +/***************************************************************** + tbase and rbase registers +*****************************************************************/ +#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \ + (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase)) +#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \ + (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase)) +#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \ + (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr)) +#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \ + (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr)) +#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \ + ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode))) +#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \ + ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode))) +#define INCREASE_TBD(bd,quicc,pram) { \ + if((bd)->status & T_W) \ + (bd) = TBD_ADDR(quicc,pram); \ + else \ + (bd)++; \ +} +#define DECREASE_TBD(bd,quicc,pram) { \ + if ((bd) == TBD_ADDR(quicc, pram)) \ + while (!((bd)->status & T_W)) \ + (bd)++; \ + else \ + (bd)--; \ +} +#define INCREASE_RBD(bd,quicc,pram) { \ + if((bd)->status & R_W) \ + (bd) = RBD_ADDR(quicc,pram); \ + else \ + (bd)++; \ +} +#define DECREASE_RBD(bd,quicc,pram) { \ + if ((bd) == RBD_ADDR(quicc, pram)) \ + while (!((bd)->status & T_W)) \ + (bd)++; \ + else \ + (bd)--; \ +} + +/***************************************************************** + Macros for Multi channel +*****************************************************************/ +#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page]) +#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase) +#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \ + (&(quicc->ch_or_u.ch_pram_tbl[channel]))) +#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \ + (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase))) +#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \ + (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase))) +#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \ + (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr))) +#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \ + (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr))) +#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \ + CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \ + ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page)))) +#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \ + CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \ + ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page)))) + +#define INCREASE_TBD_32(bd,quicc,page,channel) { \ + if((bd)->status & T_W) \ + (bd) = TBD_32_ADDR(quicc,page,channel); \ + else \ + (bd)++; \ +} +#define DECREASE_TBD_32(bd,quicc,page,channel) { \ + if ((bd) == TBD_32_ADDR(quicc, page,channel)) \ + while (!((bd)->status & T_W)) \ + (bd)++; \ + else \ + (bd)--; \ +} +#define INCREASE_RBD_32(bd,quicc,page,channel) { \ + if((bd)->status & R_W) \ + (bd) = RBD_32_ADDR(quicc,page,channel); \ + else \ + (bd)++; \ +} +#define DECREASE_RBD_32(bd,quicc,page,channel) { \ + if ((bd) == RBD_32_ADDR(quicc, page,channel)) \ + while (!((bd)->status & T_W)) \ + (bd)++; \ + else \ + (bd)--; \ +} + +#endif diff --git a/arch/m68knommu/include/asm/machdep.h b/arch/m68knommu/include/asm/machdep.h new file mode 100644 index 000000000000..de9f47a51cc2 --- /dev/null +++ b/arch/m68knommu/include/asm/machdep.h @@ -0,0 +1,26 @@ +#ifndef _M68KNOMMU_MACHDEP_H +#define _M68KNOMMU_MACHDEP_H + +#include + +/* Hardware clock functions */ +extern void hw_timer_init(void); +extern unsigned long hw_timer_offset(void); + +extern irqreturn_t arch_timer_interrupt(int irq, void *dummy); + +/* Machine dependent time handling */ +extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour, + int *min, int *sec); +extern int (*mach_set_clock_mmss)(unsigned long); + +/* machine dependent power off functions */ +extern void (*mach_reset)( void ); +extern void (*mach_halt)( void ); +extern void (*mach_power_off)( void ); + +extern void config_BSP(char *command, int len); + +extern void do_IRQ(int irq, struct pt_regs *fp); + +#endif /* _M68KNOMMU_MACHDEP_H */ diff --git a/arch/m68knommu/include/asm/math-emu.h b/arch/m68knommu/include/asm/math-emu.h new file mode 100644 index 000000000000..7e7090517b72 --- /dev/null +++ b/arch/m68knommu/include/asm/math-emu.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/mc146818rtc.h b/arch/m68knommu/include/asm/mc146818rtc.h new file mode 100644 index 000000000000..907a0481a140 --- /dev/null +++ b/arch/m68knommu/include/asm/mc146818rtc.h @@ -0,0 +1,9 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef _M68KNOMMU_MC146818RTC_H +#define _M68KNOMMU_MC146818RTC_H + +/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */ + +#endif /* _M68KNOMMU_MC146818RTC_H */ diff --git a/arch/m68knommu/include/asm/mcfcache.h b/arch/m68knommu/include/asm/mcfcache.h new file mode 100644 index 000000000000..c042634fadaa --- /dev/null +++ b/arch/m68knommu/include/asm/mcfcache.h @@ -0,0 +1,150 @@ +/****************************************************************************/ + +/* + * mcfcache.h -- ColdFire CPU cache support code + * + * (C) Copyright 2004, Greg Ungerer + */ + +/****************************************************************************/ +#ifndef __M68KNOMMU_MCFCACHE_H +#define __M68KNOMMU_MCFCACHE_H +/****************************************************************************/ + + +/* + * The different ColdFire families have different cache arrangments. + * Everything from a small instruction only cache, to configurable + * data and/or instruction cache, to unified instruction/data, to + * harvard style separate instruction and data caches. + */ + +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272) +/* + * Simple version 2 core cache. These have instruction cache only, + * we just need to invalidate it and enable it. + */ +.macro CACHE_ENABLE + movel #0x01000000,%d0 /* invalidate cache cmd */ + movec %d0,%CACR /* do invalidate cache */ + movel #0x80000100,%d0 /* setup cache mask */ + movec %d0,%CACR /* enable cache */ +.endm +#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */ + +#if defined(CONFIG_M523x) || defined(CONFIG_M527x) +/* + * New version 2 cores have a configurable split cache arrangement. + * For now I am just enabling instruction cache - but ultimately I + * think a split instruction/data cache would be better. + */ +.macro CACHE_ENABLE + movel #0x01400000,%d0 + movec %d0,%CACR /* invalidate cache */ + nop + movel #0x0000c000,%d0 /* set SDRAM cached only */ + movec %d0,%ACR0 + movel #0x00000000,%d0 /* no other regions cached */ + movec %d0,%ACR1 + movel #0x80400100,%d0 /* configure cache */ + movec %d0,%CACR /* enable cache */ + nop +.endm +#endif /* CONFIG_M523x || CONFIG_M527x */ + +#if defined(CONFIG_M528x) +.macro CACHE_ENABLE + nop + movel #0x01000000, %d0 + movec %d0, %CACR /* Invalidate cache */ + nop + movel #0x0000c020, %d0 /* Set SDRAM cached only */ + movec %d0, %ACR0 + movel #0x00000000, %d0 /* No other regions cached */ + movec %d0, %ACR1 + movel #0x80000200, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + nop +.endm +#endif /* CONFIG_M528x */ + +#if defined(CONFIG_M5249) || defined(CONFIG_M5307) +/* + * The version 3 core cache. Oddly enough the version 2 core 5249 + * has the same SDRAM and cache setup as the version 3 cores. + * This is a single unified instruction/data cache. + */ +.macro CACHE_ENABLE + movel #0x01000000,%d0 /* invalidate whole cache */ + movec %d0,%CACR + nop +#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3) + movel #0x0000c000,%d0 /* set SDRAM cached (write-thru) */ +#else + movel #0x0000c020,%d0 /* set SDRAM cached (copyback) */ +#endif + movec %d0,%ACR0 + movel #0x00000000,%d0 /* no other regions cached */ + movec %d0,%ACR1 + movel #0xa0000200,%d0 /* enable cache */ + movec %d0,%CACR + nop +.endm +#endif /* CONFIG_M5249 || CONFIG_M5307 */ + +#if defined(CONFIG_M532x) +.macro CACHE_ENABLE + movel #0x01000000,%d0 /* invalidate cache cmd */ + movec %d0,%CACR /* do invalidate cache */ + nop + movel #0x4001C000,%d0 /* set SDRAM cached (write-thru) */ + movec %d0,%ACR0 + movel #0x00000000,%d0 /* no other regions cached */ + movec %d0,%ACR1 + movel #0x80000200,%d0 /* setup cache mask */ + movec %d0,%CACR /* enable cache */ + nop +.endm +#endif /* CONFIG_M532x */ + +#if defined(CONFIG_M5407) +/* + * Version 4 cores have a true harvard style separate instruction + * and data cache. Invalidate and enable cache, also enable write + * buffers and branch accelerator. + */ +.macro CACHE_ENABLE + movel #0x01040100,%d0 /* invalidate whole cache */ + movec %d0,%CACR + nop + movel #0x000fc000,%d0 /* set SDRAM cached only */ + movec %d0, %ACR0 + movel #0x00000000,%d0 /* no other regions cached */ + movec %d0, %ACR1 + movel #0x000fc000,%d0 /* set SDRAM cached only */ + movec %d0, %ACR2 + movel #0x00000000,%d0 /* no other regions cached */ + movec %d0, %ACR3 + movel #0xb6088400,%d0 /* enable caches */ + movec %d0,%CACR + nop +.endm +#endif /* CONFIG_M5407 */ + +#if defined(CONFIG_M520x) +.macro CACHE_ENABLE + move.l #0x01000000,%d0 /* invalidate whole cache */ + movec %d0,%CACR + nop + move.l #0x0000c000,%d0 /* set SDRAM cached (write-thru) */ + movec %d0,%ACR0 + move.l #0x00000000,%d0 /* no other regions cached */ + movec %d0,%ACR1 + move.l #0x80400000,%d0 /* enable 8K instruction cache */ + movec %d0,%CACR + nop +.endm +#endif /* CONFIG_M520x */ + +/****************************************************************************/ +#endif /* __M68KNOMMU_MCFCACHE_H */ diff --git a/arch/m68knommu/include/asm/mcfdma.h b/arch/m68knommu/include/asm/mcfdma.h new file mode 100644 index 000000000000..705c52c79cd8 --- /dev/null +++ b/arch/m68knommu/include/asm/mcfdma.h @@ -0,0 +1,144 @@ +/****************************************************************************/ + +/* + * mcfdma.h -- Coldfire internal DMA support defines. + * + * (C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org) + */ + +/****************************************************************************/ +#ifndef mcfdma_h +#define mcfdma_h +/****************************************************************************/ + + +/* + * Get address specific defines for this Coldfire member. + */ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) +#define MCFDMA_BASE0 0x200 /* Base address of DMA 0 */ +#define MCFDMA_BASE1 0x240 /* Base address of DMA 1 */ +#elif defined(CONFIG_M5272) +#define MCFDMA_BASE0 0x0e0 /* Base address of DMA 0 */ +#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) +/* These are relative to the IPSBAR, not MBAR */ +#define MCFDMA_BASE0 0x100 /* Base address of DMA 0 */ +#define MCFDMA_BASE1 0x140 /* Base address of DMA 1 */ +#define MCFDMA_BASE2 0x180 /* Base address of DMA 2 */ +#define MCFDMA_BASE3 0x1C0 /* Base address of DMA 3 */ +#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) +#define MCFDMA_BASE0 0x300 /* Base address of DMA 0 */ +#define MCFDMA_BASE1 0x340 /* Base address of DMA 1 */ +#define MCFDMA_BASE2 0x380 /* Base address of DMA 2 */ +#define MCFDMA_BASE3 0x3C0 /* Base address of DMA 3 */ +#endif + + +#if !defined(CONFIG_M5272) + +/* + * Define the DMA register set addresses. + * Note: these are longword registers, use unsigned long as data type + */ +#define MCFDMA_SAR 0x00 /* DMA source address (r/w) */ +#define MCFDMA_DAR 0x01 /* DMA destination adr (r/w) */ +/* these are word registers, use unsigned short data type */ +#define MCFDMA_DCR 0x04 /* DMA control reg (r/w) */ +#define MCFDMA_BCR 0x06 /* DMA byte count reg (r/w) */ +/* these are byte registers, use unsiged char data type */ +#define MCFDMA_DSR 0x10 /* DMA status reg (r/w) */ +#define MCFDMA_DIVR 0x14 /* DMA interrupt vec (r/w) */ + +/* + * Bit definitions for the DMA Control Register (DCR). + */ +#define MCFDMA_DCR_INT 0x8000 /* Enable completion irq */ +#define MCFDMA_DCR_EEXT 0x4000 /* Enable external DMA req */ +#define MCFDMA_DCR_CS 0x2000 /* Enable cycle steal */ +#define MCFDMA_DCR_AA 0x1000 /* Enable auto alignment */ +#define MCFDMA_DCR_BWC_MASK 0x0E00 /* Bandwidth ctl mask */ +#define MCFDMA_DCR_BWC_512 0x0200 /* Bandwidth: 512 Bytes */ +#define MCFDMA_DCR_BWC_1024 0x0400 /* Bandwidth: 1024 Bytes */ +#define MCFDMA_DCR_BWC_2048 0x0600 /* Bandwidth: 2048 Bytes */ +#define MCFDMA_DCR_BWC_4096 0x0800 /* Bandwidth: 4096 Bytes */ +#define MCFDMA_DCR_BWC_8192 0x0a00 /* Bandwidth: 8192 Bytes */ +#define MCFDMA_DCR_BWC_16384 0x0c00 /* Bandwidth: 16384 Bytes */ +#define MCFDMA_DCR_BWC_32768 0x0e00 /* Bandwidth: 32768 Bytes */ +#define MCFDMA_DCR_SAA 0x0100 /* Single Address Access */ +#define MCFDMA_DCR_S_RW 0x0080 /* SAA read/write value */ +#define MCFDMA_DCR_SINC 0x0040 /* Source addr inc enable */ +#define MCFDMA_DCR_SSIZE_MASK 0x0030 /* Src xfer size */ +#define MCFDMA_DCR_SSIZE_LONG 0x0000 /* Src xfer size, 00 = longw */ +#define MCFDMA_DCR_SSIZE_BYTE 0x0010 /* Src xfer size, 01 = byte */ +#define MCFDMA_DCR_SSIZE_WORD 0x0020 /* Src xfer size, 10 = word */ +#define MCFDMA_DCR_SSIZE_LINE 0x0030 /* Src xfer size, 11 = line */ +#define MCFDMA_DCR_DINC 0x0008 /* Dest addr inc enable */ +#define MCFDMA_DCR_DSIZE_MASK 0x0006 /* Dest xfer size */ +#define MCFDMA_DCR_DSIZE_LONG 0x0000 /* Dest xfer size, 00 = long */ +#define MCFDMA_DCR_DSIZE_BYTE 0x0002 /* Dest xfer size, 01 = byte */ +#define MCFDMA_DCR_DSIZE_WORD 0x0004 /* Dest xfer size, 10 = word */ +#define MCFDMA_DCR_DSIZE_LINE 0x0006 /* Dest xfer size, 11 = line */ +#define MCFDMA_DCR_START 0x0001 /* Start transfer */ + +/* + * Bit definitions for the DMA Status Register (DSR). + */ +#define MCFDMA_DSR_CE 0x40 /* Config error */ +#define MCFDMA_DSR_BES 0x20 /* Bus Error on source */ +#define MCFDMA_DSR_BED 0x10 /* Bus Error on dest */ +#define MCFDMA_DSR_REQ 0x04 /* Requests remaining */ +#define MCFDMA_DSR_BSY 0x02 /* Busy */ +#define MCFDMA_DSR_DONE 0x01 /* DMA transfer complete */ + +#else /* This is an MCF5272 */ + +#define MCFDMA_DMR 0x00 /* Mode Register (r/w) */ +#define MCFDMA_DIR 0x03 /* Interrupt trigger register (r/w) */ +#define MCFDMA_DSAR 0x03 /* Source Address register (r/w) */ +#define MCFDMA_DDAR 0x04 /* Destination Address register (r/w) */ +#define MCFDMA_DBCR 0x02 /* Byte Count Register (r/w) */ + +/* Bit definitions for the DMA Mode Register (DMR) */ +#define MCFDMA_DMR_RESET 0x80000000L /* Reset bit */ +#define MCFDMA_DMR_EN 0x40000000L /* DMA enable */ +#define MCFDMA_DMR_RQM 0x000C0000L /* Request Mode Mask */ +#define MCFDMA_DMR_RQM_DUAL 0x000C0000L /* Dual address mode, the only valid mode */ +#define MCFDMA_DMR_DSTM 0x00002000L /* Destination addressing mask */ +#define MCFDMA_DMR_DSTM_SA 0x00000000L /* Destination uses static addressing */ +#define MCFDMA_DMR_DSTM_IA 0x00002000L /* Destination uses incremental addressing */ +#define MCFDMA_DMR_DSTT_UD 0x00000400L /* Destination is user data */ +#define MCFDMA_DMR_DSTT_UC 0x00000800L /* Destination is user code */ +#define MCFDMA_DMR_DSTT_SD 0x00001400L /* Destination is supervisor data */ +#define MCFDMA_DMR_DSTT_SC 0x00001800L /* Destination is supervisor code */ +#define MCFDMA_DMR_DSTS_OFF 0x8 /* offset to the destination size bits */ +#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */ +#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */ +#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */ +#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */ +#define MCFDMA_DMR_SRCM 0x00000020L /* Source addressing mask */ +#define MCFDMA_DMR_SRCM_SA 0x00000000L /* Source uses static addressing */ +#define MCFDMA_DMR_SRCM_IA 0x00000020L /* Source uses incremental addressing */ +#define MCFDMA_DMR_SRCT_UD 0x00000004L /* Source is user data */ +#define MCFDMA_DMR_SRCT_UC 0x00000008L /* Source is user code */ +#define MCFDMA_DMR_SRCT_SD 0x00000014L /* Source is supervisor data */ +#define MCFDMA_DMR_SRCT_SC 0x00000018L /* Source is supervisor code */ +#define MCFDMA_DMR_SRCS_OFF 0x0 /* Offset to the source size bits */ +#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */ +#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */ +#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */ +#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */ + +/* Bit definitions for the DMA interrupt register (DIR) */ +#define MCFDMA_DIR_INVEN 0x1000 /* Invalid Combination interrupt enable */ +#define MCFDMA_DIR_ASCEN 0x0800 /* Address Sequence Complete (Completion) interrupt enable */ +#define MCFDMA_DIR_TEEN 0x0200 /* Transfer Error interrupt enable */ +#define MCFDMA_DIR_TCEN 0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */ +#define MCFDMA_DIR_INV 0x0010 /* Invalid Combination */ +#define MCFDMA_DIR_ASC 0x0008 /* Address Sequence Complete (DMA Completion) */ +#define MCFDMA_DIR_TE 0x0002 /* Transfer Error */ +#define MCFDMA_DIR_TC 0x0001 /* Transfer Complete */ + +#endif /* !defined(CONFIG_M5272) */ + +/****************************************************************************/ +#endif /* mcfdma_h */ diff --git a/arch/m68knommu/include/asm/mcfmbus.h b/arch/m68knommu/include/asm/mcfmbus.h new file mode 100644 index 000000000000..319899c47a2c --- /dev/null +++ b/arch/m68knommu/include/asm/mcfmbus.h @@ -0,0 +1,77 @@ +/****************************************************************************/ + +/* + * mcfmbus.h -- Coldfire MBUS support defines. + * + * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) + */ + +/****************************************************************************/ + + +#ifndef mcfmbus_h +#define mcfmbus_h + + +#define MCFMBUS_BASE 0x280 +#define MCFMBUS_IRQ_VECTOR 0x19 +#define MCFMBUS_IRQ 0x1 +#define MCFMBUS_CLK 0x3f +#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/ +#define MCFMBUS_ADDRESS 0x01 + + +/* +* Define the 5307 MBUS register set addresses +*/ + +#define MCFMBUS_MADR 0x00 +#define MCFMBUS_MFDR 0x04 +#define MCFMBUS_MBCR 0x08 +#define MCFMBUS_MBSR 0x0C +#define MCFMBUS_MBDR 0x10 + + +#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/ + +#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/ + +/* +* Define bit flags in Control Register +*/ + +#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */ +#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */ +#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */ +#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */ +#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */ +#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */ + +/* +* Define bit flags in Status Register +*/ + +#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */ +#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */ +#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */ +#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */ +#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */ +#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */ +#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */ + +/* +* Define bit flags in DATA I/O Register +*/ + +#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */ + +#define MBUSIOCSCLOCK 1 +#define MBUSIOCGCLOCK 2 +#define MBUSIOCSADDR 3 +#define MBUSIOCGADDR 4 +#define MBUSIOCSSLADDR 5 +#define MBUSIOCGSLADDR 6 +#define MBUSIOCSSUBADDR 7 +#define MBUSIOCGSUBADDR 8 + +#endif diff --git a/arch/m68knommu/include/asm/mcfne.h b/arch/m68knommu/include/asm/mcfne.h new file mode 100644 index 000000000000..431f63aadd0e --- /dev/null +++ b/arch/m68knommu/include/asm/mcfne.h @@ -0,0 +1,325 @@ +/****************************************************************************/ + +/* + * mcfne.h -- NE2000 in ColdFire eval boards. + * + * (C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo (www.lineo.com) + * (C) Copyright 2001, SnapGear (www.snapgear.com) + * + * 19990409 David W. Miller Converted from m5206ne.h for 5307 eval board + * + * Hacked support for m5206e Cadre III evaluation board + * Fred Stevens (fred.stevens@pemstar.com) 13 April 1999 + */ + +/****************************************************************************/ +#ifndef mcfne_h +#define mcfne_h +/****************************************************************************/ + + +/* + * Support for NE2000 clones devices in ColdFire based boards. + * Not all boards address these parts the same way, some use a + * direct addressing method, others use a side-band address space + * to access odd address registers, some require byte swapping + * others do not. + */ +#define BSWAP(w) (((w) << 8) | ((w) >> 8)) +#define RSWAP(w) (w) + + +/* + * Define the basic hardware resources of NE2000 boards. + */ + +#if defined(CONFIG_ARN5206) +#define NE2000_ADDR 0x40000300 +#define NE2000_ODDOFFSET 0x00010000 +#define NE2000_IRQ_VECTOR 0xf0 +#define NE2000_IRQ_PRIORITY 2 +#define NE2000_IRQ_LEVEL 4 +#define NE2000_BYTE volatile unsigned short +#endif + +#if defined(CONFIG_M5206eC3) +#define NE2000_ADDR 0x40000300 +#define NE2000_ODDOFFSET 0x00010000 +#define NE2000_IRQ_VECTOR 0x1c +#define NE2000_IRQ_PRIORITY 2 +#define NE2000_IRQ_LEVEL 4 +#define NE2000_BYTE volatile unsigned short +#endif + +#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel) +#define NE2000_ADDR 0x30000300 +#define NE2000_IRQ_VECTOR 25 +#define NE2000_IRQ_PRIORITY 1 +#define NE2000_IRQ_LEVEL 3 +#define NE2000_BYTE volatile unsigned char +#endif + +#if defined(CONFIG_M5307C3) +#define NE2000_ADDR 0x40000300 +#define NE2000_ODDOFFSET 0x00010000 +#define NE2000_IRQ_VECTOR 0x1b +#define NE2000_BYTE volatile unsigned short +#endif + +#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) +#define NE2000_ADDR 0x30600300 +#define NE2000_ODDOFFSET 0x00008000 +#define NE2000_IRQ_VECTOR 67 +#undef BSWAP +#define BSWAP(w) (w) +#define NE2000_BYTE volatile unsigned short +#undef RSWAP +#define RSWAP(w) (((w) << 8) | ((w) >> 8)) +#endif + +#if defined(CONFIG_M5307) && defined(CONFIG_NETtel) +#define NE2000_ADDR0 0x30600300 +#define NE2000_ADDR1 0x30800300 +#define NE2000_ODDOFFSET 0x00008000 +#define NE2000_IRQ_VECTOR0 27 +#define NE2000_IRQ_VECTOR1 29 +#undef BSWAP +#define BSWAP(w) (w) +#define NE2000_BYTE volatile unsigned short +#undef RSWAP +#define RSWAP(w) (((w) << 8) | ((w) >> 8)) +#endif + +#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3) +#define NE2000_ADDR 0x30600300 +#define NE2000_ODDOFFSET 0x00008000 +#define NE2000_IRQ_VECTOR 27 +#undef BSWAP +#define BSWAP(w) (w) +#define NE2000_BYTE volatile unsigned short +#undef RSWAP +#define RSWAP(w) (((w) << 8) | ((w) >> 8)) +#endif + +#if defined(CONFIG_ARN5307) +#define NE2000_ADDR 0xfe600300 +#define NE2000_ODDOFFSET 0x00010000 +#define NE2000_IRQ_VECTOR 0x1b +#define NE2000_IRQ_PRIORITY 2 +#define NE2000_IRQ_LEVEL 3 +#define NE2000_BYTE volatile unsigned short +#endif + +#if defined(CONFIG_M5407C3) +#define NE2000_ADDR 0x40000300 +#define NE2000_ODDOFFSET 0x00010000 +#define NE2000_IRQ_VECTOR 0x1b +#define NE2000_BYTE volatile unsigned short +#endif + +/****************************************************************************/ + +/* + * Side-band address space for odd address requires re-mapping + * many of the standard ISA access functions. + */ +#ifdef NE2000_ODDOFFSET + +#undef outb +#undef outb_p +#undef inb +#undef inb_p +#undef outsb +#undef outsw +#undef insb +#undef insw + +#define outb ne2000_outb +#define inb ne2000_inb +#define outb_p ne2000_outb +#define inb_p ne2000_inb +#define outsb ne2000_outsb +#define outsw ne2000_outsw +#define insb ne2000_insb +#define insw ne2000_insw + + +#ifndef COLDFIRE_NE2000_FUNCS + +void ne2000_outb(unsigned int val, unsigned int addr); +int ne2000_inb(unsigned int addr); +void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len); +void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len); +void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len); +void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len); + +#else + +/* + * This macro converts a conventional register address into the + * real memory pointer of the mapped NE2000 device. + * On most NE2000 implementations on ColdFire boards the chip is + * mapped in kinda funny, due to its ISA heritage. + */ +#define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr)) +#define NE2000_DATA_PTR(addr) (addr) + + +void ne2000_outb(unsigned int val, unsigned int addr) +{ + NE2000_BYTE *rp; + + rp = (NE2000_BYTE *) NE2000_PTR(addr); + *rp = RSWAP(val); +} + +int ne2000_inb(unsigned int addr) +{ + NE2000_BYTE *rp, val; + + rp = (NE2000_BYTE *) NE2000_PTR(addr); + val = *rp; + return((int) ((NE2000_BYTE) RSWAP(val))); +} + +void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len) +{ + NE2000_BYTE *rp, val; + unsigned char *buf; + + buf = (unsigned char *) vbuf; + rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr); + for (; (len > 0); len--) { + val = *rp; + *buf++ = RSWAP(val); + } +} + +void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len) +{ + volatile unsigned short *rp; + unsigned short w, *buf; + + buf = (unsigned short *) vbuf; + rp = (volatile unsigned short *) NE2000_DATA_PTR(addr); + for (; (len > 0); len--) { + w = *rp; + *buf++ = BSWAP(w); + } +} + +void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len) +{ + NE2000_BYTE *rp, val; + unsigned char *buf; + + buf = (unsigned char *) vbuf; + rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr); + for (; (len > 0); len--) { + val = *buf++; + *rp = RSWAP(val); + } +} + +void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len) +{ + volatile unsigned short *rp; + unsigned short w, *buf; + + buf = (unsigned short *) vbuf; + rp = (volatile unsigned short *) NE2000_DATA_PTR(addr); + for (; (len > 0); len--) { + w = *buf++; + *rp = BSWAP(w); + } +} + +#endif /* COLDFIRE_NE2000_FUNCS */ +#endif /* NE2000_OFFOFFSET */ + +/****************************************************************************/ + +#ifdef COLDFIRE_NE2000_FUNCS + +/* + * Lastly the interrupt set up code... + * Minor differences between the different board types. + */ + +#if defined(CONFIG_ARN5206) +void ne2000_irqsetup(int irq) +{ + volatile unsigned char *icrp; + + icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); + *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2; + mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); +} +#endif + +#if defined(CONFIG_M5206eC3) +void ne2000_irqsetup(int irq) +{ + volatile unsigned char *icrp; + + icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); + *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC; + mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); +} +#endif + +#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel) +void ne2000_irqsetup(int irq) +{ + mcf_autovector(irq); +} +#endif + +#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) +void ne2000_irqsetup(int irq) +{ + volatile unsigned long *icrp; + volatile unsigned long *pitr; + + /* The NE2000 device uses external IRQ3 */ + icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); + *icrp = (*icrp & 0x77077777) | 0x00d00000; + + pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR); + *pitr = *pitr | 0x20000000; +} + +void ne2000_irqack(int irq) +{ + volatile unsigned long *icrp; + + /* The NE2000 device uses external IRQ3 */ + icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); + *icrp = (*icrp & 0x77777777) | 0x00800000; +} +#endif + +#if defined(CONFIG_M5307) || defined(CONFIG_M5407) +#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) + +void ne2000_irqsetup(int irq) +{ + mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); + mcf_autovector(irq); +} + +#else + +void ne2000_irqsetup(int irq) +{ + mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); +} + +#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */ +#endif /* CONFIG_M5307 || CONFIG_M5407 */ + +#endif /* COLDFIRE_NE2000_FUNCS */ + +/****************************************************************************/ +#endif /* mcfne_h */ diff --git a/arch/m68knommu/include/asm/mcfpci.h b/arch/m68knommu/include/asm/mcfpci.h new file mode 100644 index 000000000000..f1507dd06ec6 --- /dev/null +++ b/arch/m68knommu/include/asm/mcfpci.h @@ -0,0 +1,119 @@ +/****************************************************************************/ + +/* + * mcfpci.h -- PCI bridge on ColdFire eval boards. + * + * (C) Copyright 2000, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef mcfpci_h +#define mcfpci_h +/****************************************************************************/ + + +#ifdef CONFIG_PCI + +/* + * Address regions in the PCI address space are not mapped into the + * normal memory space of the ColdFire. They must be accessed via + * handler routines. This is easy for I/O space (inb/outb/etc) but + * needs some code changes to support ordinary memory. Interrupts + * also need to be vectored through the PCI handler first, then it + * will call the actual driver sub-handlers. + */ + +/* + * Un-define all the standard I/O access routines. + */ +#undef inb +#undef inw +#undef inl +#undef inb_p +#undef inw_p +#undef insb +#undef insw +#undef insl +#undef outb +#undef outw +#undef outl +#undef outb_p +#undef outw_p +#undef outsb +#undef outsw +#undef outsl + +#undef request_irq +#undef free_irq + +#undef bus_to_virt +#undef virt_to_bus + + +/* + * Re-direct all I/O memory accesses functions to PCI specific ones. + */ +#define inb pci_inb +#define inw pci_inw +#define inl pci_inl +#define inb_p pci_inb +#define inw_p pci_inw +#define insb pci_insb +#define insw pci_insw +#define insl pci_insl + +#define outb pci_outb +#define outw pci_outw +#define outl pci_outl +#define outb_p pci_outb +#define outw_p pci_outw +#define outsb pci_outsb +#define outsw pci_outsw +#define outsl pci_outsl + +#define request_irq pci_request_irq +#define free_irq pci_free_irq + +#define virt_to_bus pci_virt_to_bus +#define bus_to_virt pci_bus_to_virt + +#define CONFIG_COMEMPCI 1 + + +/* + * Prototypes of the real PCI functions (defined in bios32.c). + */ +unsigned char pci_inb(unsigned int addr); +unsigned short pci_inw(unsigned int addr); +unsigned int pci_inl(unsigned int addr); +void pci_insb(void *addr, void *buf, int len); +void pci_insw(void *addr, void *buf, int len); +void pci_insl(void *addr, void *buf, int len); + +void pci_outb(unsigned char val, unsigned int addr); +void pci_outw(unsigned short val, unsigned int addr); +void pci_outl(unsigned int val, unsigned int addr); +void pci_outsb(void *addr, void *buf, int len); +void pci_outsw(void *addr, void *buf, int len); +void pci_outsl(void *addr, void *buf, int len); + +int pci_request_irq(unsigned int irq, + void (*handler)(int, void *, struct pt_regs *), + unsigned long flags, + const char *device, + void *dev_id); +void pci_free_irq(unsigned int irq, void *dev_id); + +void *pci_bmalloc(int size); +void pci_bmfree(void *bmp, int len); +void pci_copytoshmem(unsigned long bmp, void *src, int size); +void pci_copyfromshmem(void *dst, unsigned long bmp, int size); +unsigned long pci_virt_to_bus(volatile void *address); +void *pci_bus_to_virt(unsigned long address); +void pci_bmcpyto(void *dst, void *src, int len); +void pci_bmcpyfrom(void *dst, void *src, int len); + +#endif /* CONFIG_PCI */ +/****************************************************************************/ +#endif /* mcfpci_h */ diff --git a/arch/m68knommu/include/asm/mcfpit.h b/arch/m68knommu/include/asm/mcfpit.h new file mode 100644 index 000000000000..f570cf64fd29 --- /dev/null +++ b/arch/m68knommu/include/asm/mcfpit.h @@ -0,0 +1,64 @@ +/****************************************************************************/ + +/* + * mcfpit.h -- ColdFire internal PIT timer support defines. + * + * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com) + */ + +/****************************************************************************/ +#ifndef mcfpit_h +#define mcfpit_h +/****************************************************************************/ + + +/* + * Get address specific defines for the 5270/5271, 5280/5282, and 5208. + */ +#if defined(CONFIG_M520x) +#define MCFPIT_BASE1 0x00080000 /* Base address of TIMER1 */ +#define MCFPIT_BASE2 0x00084000 /* Base address of TIMER2 */ +#else +#define MCFPIT_BASE1 0x00150000 /* Base address of TIMER1 */ +#define MCFPIT_BASE2 0x00160000 /* Base address of TIMER2 */ +#define MCFPIT_BASE3 0x00170000 /* Base address of TIMER3 */ +#define MCFPIT_BASE4 0x00180000 /* Base address of TIMER4 */ +#endif + +/* + * Define the PIT timer register set addresses. + */ +#define MCFPIT_PCSR 0x0 /* PIT control register */ +#define MCFPIT_PMR 0x2 /* PIT modulus register */ +#define MCFPIT_PCNTR 0x4 /* PIT count register */ + +/* + * Bit definitions for the PIT Control and Status register. + */ +#define MCFPIT_PCSR_CLK1 0x0000 /* System clock divisor */ +#define MCFPIT_PCSR_CLK2 0x0100 /* System clock divisor */ +#define MCFPIT_PCSR_CLK4 0x0200 /* System clock divisor */ +#define MCFPIT_PCSR_CLK8 0x0300 /* System clock divisor */ +#define MCFPIT_PCSR_CLK16 0x0400 /* System clock divisor */ +#define MCFPIT_PCSR_CLK32 0x0500 /* System clock divisor */ +#define MCFPIT_PCSR_CLK64 0x0600 /* System clock divisor */ +#define MCFPIT_PCSR_CLK128 0x0700 /* System clock divisor */ +#define MCFPIT_PCSR_CLK256 0x0800 /* System clock divisor */ +#define MCFPIT_PCSR_CLK512 0x0900 /* System clock divisor */ +#define MCFPIT_PCSR_CLK1024 0x0a00 /* System clock divisor */ +#define MCFPIT_PCSR_CLK2048 0x0b00 /* System clock divisor */ +#define MCFPIT_PCSR_CLK4096 0x0c00 /* System clock divisor */ +#define MCFPIT_PCSR_CLK8192 0x0d00 /* System clock divisor */ +#define MCFPIT_PCSR_CLK16384 0x0e00 /* System clock divisor */ +#define MCFPIT_PCSR_CLK32768 0x0f00 /* System clock divisor */ +#define MCFPIT_PCSR_DOZE 0x0040 /* Clock run in doze mode */ +#define MCFPIT_PCSR_HALTED 0x0020 /* Clock run in halt mode */ +#define MCFPIT_PCSR_OVW 0x0010 /* Overwrite PIT counter now */ +#define MCFPIT_PCSR_PIE 0x0008 /* Enable PIT interrupt */ +#define MCFPIT_PCSR_PIF 0x0004 /* PIT interrupt flag */ +#define MCFPIT_PCSR_RLD 0x0002 /* Reload counter */ +#define MCFPIT_PCSR_EN 0x0001 /* Enable PIT */ +#define MCFPIT_PCSR_DISABLE 0x0000 /* Disable PIT */ + +/****************************************************************************/ +#endif /* mcfpit_h */ diff --git a/arch/m68knommu/include/asm/mcfsim.h b/arch/m68knommu/include/asm/mcfsim.h new file mode 100644 index 000000000000..da3f2ceff3a4 --- /dev/null +++ b/arch/m68knommu/include/asm/mcfsim.h @@ -0,0 +1,126 @@ +/****************************************************************************/ + +/* + * mcfsim.h -- ColdFire System Integration Module support. + * + * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef mcfsim_h +#define mcfsim_h +/****************************************************************************/ + + +/* + * Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282, + * 5307 or 5407 specific addresses. + */ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) +#include +#elif defined(CONFIG_M520x) +#include +#elif defined(CONFIG_M523x) +#include +#elif defined(CONFIG_M5249) +#include +#elif defined(CONFIG_M527x) +#include +#elif defined(CONFIG_M5272) +#include +#elif defined(CONFIG_M528x) +#include +#elif defined(CONFIG_M5307) +#include +#elif defined(CONFIG_M532x) +#include +#elif defined(CONFIG_M5407) +#include +#endif + + +/* + * Define the base address of the SIM within the MBAR address space. + */ +#define MCFSIM_BASE 0x0 /* Base address of SIM */ + + +/* + * Bit definitions for the ICR family of registers. + */ +#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ +#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ +#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ +#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ +#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ +#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ +#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ +#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ +#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ + +#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ +#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ +#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ +#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ + +/* + * Bit definitions for the Interrupt Mask register (IMR). + */ +#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */ +#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */ +#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */ +#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */ +#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */ +#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */ +#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */ + +#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */ +#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */ +#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */ +#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */ +#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */ +#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */ + +#if defined(CONFIG_M5206e) +#define MCFSIM_IMR_DMA1 0x4000 /* DMA 1 intr */ +#define MCFSIM_IMR_DMA2 0x8000 /* DMA 2 intr */ +#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) +#define MCFSIM_IMR_DMA0 0x4000 /* DMA 0 intr */ +#define MCFSIM_IMR_DMA1 0x8000 /* DMA 1 intr */ +#define MCFSIM_IMR_DMA2 0x10000 /* DMA 2 intr */ +#define MCFSIM_IMR_DMA3 0x20000 /* DMA 3 intr */ +#endif + +/* + * Mask for all of the SIM devices. Some parts have more or less + * SIM devices. This is a catchall for the sandard set. + */ +#ifndef MCFSIM_IMR_MASKALL +#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */ +#endif + + +/* + * PIT interrupt settings, if not found in mXXXXsim.h file. + */ +#ifndef ICR_INTRCONF +#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */ +#endif +#ifndef MCFPIT_IMR +#define MCFPIT_IMR MCFINTC_IMRH +#endif +#ifndef MCFPIT_IMR_IBIT +#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32)) +#endif + + +#ifndef __ASSEMBLY__ +/* + * Definition for the interrupt auto-vectoring support. + */ +extern void mcf_autovector(unsigned int vec); +#endif /* __ASSEMBLY__ */ + +/****************************************************************************/ +#endif /* mcfsim_h */ diff --git a/arch/m68knommu/include/asm/mcfsmc.h b/arch/m68knommu/include/asm/mcfsmc.h new file mode 100644 index 000000000000..2d7a4dbd9683 --- /dev/null +++ b/arch/m68knommu/include/asm/mcfsmc.h @@ -0,0 +1,187 @@ +/****************************************************************************/ + +/* + * mcfsmc.h -- SMC ethernet support for ColdFire environments. + * + * (C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef mcfsmc_h +#define mcfsmc_h +/****************************************************************************/ + +/* + * None of the current ColdFire targets that use the SMC91x111 + * allow 8 bit accesses. So this code is 16bit access only. + */ + + +#undef outb +#undef inb +#undef outw +#undef outwd +#undef inw +#undef outl +#undef inl + +#undef outsb +#undef outsw +#undef outsl +#undef insb +#undef insw +#undef insl + +/* + * Re-defines for ColdFire environment... The SMC part is + * mapped into memory space, so remap the PC-style in/out + * routines to handle that. + */ +#define outb smc_outb +#define inb smc_inb +#define outw smc_outw +#define outwd smc_outwd +#define inw smc_inw +#define outl smc_outl +#define inl smc_inl + +#define outsb smc_outsb +#define outsw smc_outsw +#define outsl smc_outsl +#define insb smc_insb +#define insw smc_insw +#define insl smc_insl + + +static inline int smc_inb(unsigned int addr) +{ + register unsigned short w; + w = *((volatile unsigned short *) (addr & ~0x1)); + return(((addr & 0x1) ? w : (w >> 8)) & 0xff); +} + +static inline void smc_outw(unsigned int val, unsigned int addr) +{ + *((volatile unsigned short *) addr) = (val << 8) | (val >> 8); +} + +static inline int smc_inw(unsigned int addr) +{ + register unsigned short w; + w = *((volatile unsigned short *) addr); + return(((w << 8) | (w >> 8)) & 0xffff); +} + +static inline void smc_outl(unsigned long val, unsigned int addr) +{ + *((volatile unsigned long *) addr) = + ((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) | + ((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff); +} + +static inline void smc_outwd(unsigned int val, unsigned int addr) +{ + *((volatile unsigned short *) addr) = val; +} + + +/* + * The rep* functions are used to feed the data port with + * raw data. So we do not byte swap them when copying. + */ + +static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len) +{ + volatile unsigned short *rp; + unsigned short *buf, *ebuf; + + buf = (unsigned short *) vbuf; + rp = (volatile unsigned short *) addr; + + /* Copy as words for as long as possible */ + for (ebuf = buf + (len >> 1); (buf < ebuf); ) + *buf++ = *rp; + + /* Lastly, handle left over byte */ + if (len & 0x1) + *((unsigned char *) buf) = (*rp >> 8) & 0xff; +} + +static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len) +{ + volatile unsigned short *rp; + unsigned short *buf, *ebuf; + + buf = (unsigned short *) vbuf; + rp = (volatile unsigned short *) addr; + for (ebuf = buf + len; (buf < ebuf); ) + *buf++ = *rp; +} + +static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len) +{ + volatile unsigned long *rp; + unsigned long *buf, *ebuf; + + buf = (unsigned long *) vbuf; + rp = (volatile unsigned long *) addr; + for (ebuf = buf + len; (buf < ebuf); ) + *buf++ = *rp; +} + +static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len) +{ + volatile unsigned short *rp; + unsigned short *buf, *ebuf; + + buf = (unsigned short *) vbuf; + rp = (volatile unsigned short *) addr; + for (ebuf = buf + len; (buf < ebuf); ) + *rp = *buf++; +} + +static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len) +{ + volatile unsigned long *rp; + unsigned long *buf, *ebuf; + + buf = (unsigned long *) vbuf; + rp = (volatile unsigned long *) addr; + for (ebuf = buf + len; (buf < ebuf); ) + *rp = *buf++; +} + + +#ifdef CONFIG_NETtel +/* + * Re-map the address space of at least one of the SMC ethernet + * parts. Both parts power up decoding the same address, so we + * need to move one of them first, before doing enything else. + * + * We also increase the number of wait states for this part by one. + */ + +void smc_remap(unsigned int ioaddr) +{ + static int once = 0; + extern unsigned short ppdata; + if (once++ == 0) { + *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec; + ppdata |= 0x0080; + *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; + outw(0x0001, ioaddr + BANK_SELECT); + outw(0x0001, ioaddr + BANK_SELECT); + outw(0x0067, ioaddr + BASE); + + ppdata &= ~0x0080; + *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; + } + + *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180; +} + +#endif + +/****************************************************************************/ +#endif /* mcfsmc_h */ diff --git a/arch/m68knommu/include/asm/mcftimer.h b/arch/m68knommu/include/asm/mcftimer.h new file mode 100644 index 000000000000..0f90f6d2227a --- /dev/null +++ b/arch/m68knommu/include/asm/mcftimer.h @@ -0,0 +1,80 @@ +/****************************************************************************/ + +/* + * mcftimer.h -- ColdFire internal TIMER support defines. + * + * (C) Copyright 1999-2006, Greg Ungerer + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef mcftimer_h +#define mcftimer_h +/****************************************************************************/ + + +/* + * Get address specific defines for this ColdFire member. + */ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) +#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */ +#elif defined(CONFIG_M5272) +#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */ +#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */ +#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */ +#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) +#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */ +#elif defined(CONFIG_M532x) +#define MCFTIMER_BASE1 0xfc070000 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0xfc074000 /* Base address of TIMER2 */ +#define MCFTIMER_BASE3 0xfc078000 /* Base address of TIMER3 */ +#define MCFTIMER_BASE4 0xfc07c000 /* Base address of TIMER4 */ +#endif + + +/* + * Define the TIMER register set addresses. + */ +#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */ +#define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */ +#define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */ +#define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */ +#if defined(CONFIG_M532x) +#define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */ +#else +#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */ +#endif + +/* + * Bit definitions for the Timer Mode Register (TMR). + * Register bit flags are common accross ColdFires. + */ +#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */ +#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */ +#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */ +#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */ +#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */ +#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */ +#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */ +#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */ +#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */ +#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */ +#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */ +#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */ +#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */ +#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */ +#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */ +#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */ +#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */ + +/* + * Bit definitions for the Timer Event Registers (TER). + */ +#define MCFTIMER_TER_CAP 0x01 /* Capture event */ +#define MCFTIMER_TER_REF 0x02 /* Refernece event */ + +/****************************************************************************/ +#endif /* mcftimer_h */ diff --git a/arch/m68knommu/include/asm/mcfuart.h b/arch/m68knommu/include/asm/mcfuart.h new file mode 100644 index 000000000000..ef2293873612 --- /dev/null +++ b/arch/m68knommu/include/asm/mcfuart.h @@ -0,0 +1,216 @@ +/****************************************************************************/ + +/* + * mcfuart.h -- ColdFire internal UART support defines. + * + * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef mcfuart_h +#define mcfuart_h +/****************************************************************************/ + +/* + * Define the base address of the UARTS within the MBAR address + * space. + */ +#if defined(CONFIG_M5272) +#define MCFUART_BASE1 0x100 /* Base address of UART1 */ +#define MCFUART_BASE2 0x140 /* Base address of UART2 */ +#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) +#if defined(CONFIG_NETtel) +#define MCFUART_BASE1 0x180 /* Base address of UART1 */ +#define MCFUART_BASE2 0x140 /* Base address of UART2 */ +#else +#define MCFUART_BASE1 0x140 /* Base address of UART1 */ +#define MCFUART_BASE2 0x180 /* Base address of UART2 */ +#endif +#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) +#define MCFUART_BASE1 0x200 /* Base address of UART1 */ +#define MCFUART_BASE2 0x240 /* Base address of UART2 */ +#define MCFUART_BASE3 0x280 /* Base address of UART3 */ +#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) +#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) +#define MCFUART_BASE1 0x200 /* Base address of UART1 */ +#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ +#else +#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ +#define MCFUART_BASE2 0x200 /* Base address of UART2 */ +#endif +#elif defined(CONFIG_M520x) +#define MCFUART_BASE1 0x60000 /* Base address of UART1 */ +#define MCFUART_BASE2 0x64000 /* Base address of UART2 */ +#define MCFUART_BASE3 0x68000 /* Base address of UART2 */ +#elif defined(CONFIG_M532x) +#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */ +#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */ +#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */ +#endif + + +#include +#include + +struct mcf_platform_uart { + unsigned long mapbase; /* Physical address base */ + void __iomem *membase; /* Virtual address if mapped */ + unsigned int irq; /* Interrupt vector */ + unsigned int uartclk; /* UART clock rate */ +}; + +/* + * Define the ColdFire UART register set addresses. + */ +#define MCFUART_UMR 0x00 /* Mode register (r/w) */ +#define MCFUART_USR 0x04 /* Status register (r) */ +#define MCFUART_UCSR 0x04 /* Clock Select (w) */ +#define MCFUART_UCR 0x08 /* Command register (w) */ +#define MCFUART_URB 0x0c /* Receiver Buffer (r) */ +#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ +#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ +#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ +#define MCFUART_UISR 0x14 /* Interrupt Status (r) */ +#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ +#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ +#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ +#ifdef CONFIG_M5272 +#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ +#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ +#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ +#else +#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ +#endif +#define MCFUART_UIPR 0x34 /* Input Port (r) */ +#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ +#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ + + +/* + * Define bit flags in Mode Register 1 (MR1). + */ +#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ +#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ +#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ +#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ +#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ + +#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ +#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ +#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ +#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ +#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ + +#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ +#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ +#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ +#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ + +/* + * Define bit flags in Mode Register 2 (MR2). + */ +#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ +#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ +#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ +#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ +#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ + +#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ +#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ +#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ + +/* + * Define bit flags in Status Register (USR). + */ +#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ +#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ +#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ +#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ +#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ +#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ +#define MCFUART_USR_RXFULL 0x02 /* Receiver full */ +#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ + +#define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \ + MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN) + +/* + * Define bit flags in Clock Select Register (UCSR). + */ +#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ +#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ +#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ + +#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ +#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ +#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ + +/* + * Define bit flags in Command Register (UCR). + */ +#define MCFUART_UCR_CMDNULL 0x00 /* No command */ +#define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */ +#define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */ +#define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */ +#define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */ +#define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */ +#define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */ +#define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */ + +#define MCFUART_UCR_TXNULL 0x00 /* No TX command */ +#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ +#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ +#define MCFUART_UCR_RXNULL 0x00 /* No RX command */ +#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ +#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ + +/* + * Define bit flags in Input Port Change Register (UIPCR). + */ +#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ +#define MCFUART_UIPCR_CTS 0x01 /* CTS value */ + +/* + * Define bit flags in Input Port Register (UIP). + */ +#define MCFUART_UIPR_CTS 0x01 /* CTS value */ + +/* + * Define bit flags in Output Port Registers (UOP). + * Clear bit by writing to UOP0, set by writing to UOP1. + */ +#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ + +/* + * Define bit flags in the Auxiliary Control Register (UACR). + */ +#define MCFUART_UACR_IEC 0x01 /* Input enable control */ + +/* + * Define bit flags in Interrupt Status Register (UISR). + * These same bits are used for the Interrupt Mask Register (UIMR). + */ +#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ +#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ +#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ +#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ + +#ifdef CONFIG_M5272 +/* + * Define bit flags in the Transmitter FIFO Register (UTF). + */ +#define MCFUART_UTF_TXB 0x1f /* Transmitter data level */ +#define MCFUART_UTF_FULL 0x20 /* Transmitter fifo full */ +#define MCFUART_UTF_TXS 0xc0 /* Transmitter status */ + +/* + * Define bit flags in the Receiver FIFO Register (URF). + */ +#define MCFUART_URF_RXB 0x1f /* Receiver data level */ +#define MCFUART_URF_FULL 0x20 /* Receiver fifo full */ +#define MCFUART_URF_RXS 0xc0 /* Receiver status */ +#endif + +/****************************************************************************/ +#endif /* mcfuart_h */ diff --git a/arch/m68knommu/include/asm/mcfwdebug.h b/arch/m68knommu/include/asm/mcfwdebug.h new file mode 100644 index 000000000000..27f70e45d700 --- /dev/null +++ b/arch/m68knommu/include/asm/mcfwdebug.h @@ -0,0 +1,118 @@ +/****************************************************************************/ + +/* + * mcfdebug.h -- ColdFire Debug Module support. + * + * (C) Copyright 2001, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef mcfdebug_h +#define mcfdebug_h +/****************************************************************************/ + +/* Define the debug module registers */ +#define MCFDEBUG_CSR 0x0 /* Configuration status */ +#define MCFDEBUG_BAAR 0x5 /* BDM address attribute */ +#define MCFDEBUG_AATR 0x6 /* Address attribute trigger */ +#define MCFDEBUG_TDR 0x7 /* Trigger definition */ +#define MCFDEBUG_PBR 0x8 /* PC breakpoint */ +#define MCFDEBUG_PBMR 0x9 /* PC breakpoint mask */ +#define MCFDEBUG_ABHR 0xc /* High address breakpoint */ +#define MCFDEBUG_ABLR 0xd /* Low address breakpoint */ +#define MCFDEBUG_DBR 0xe /* Data breakpoint */ +#define MCFDEBUG_DBMR 0xf /* Data breakpoint mask */ + +/* Define some handy constants for the trigger definition register */ +#define MCFDEBUG_TDR_TRC_DISP 0x00000000 /* display on DDATA only */ +#define MCFDEBUG_TDR_TRC_HALT 0x40000000 /* Processor halt on BP */ +#define MCFDEBUG_TDR_TRC_INTR 0x80000000 /* Debug intr on BP */ +#define MCFDEBUG_TDR_LXT1 0x00004000 /* TDR level 1 */ +#define MCFDEBUG_TDR_LXT2 0x00008000 /* TDR level 2 */ +#define MCFDEBUG_TDR_EBL1 0x00002000 /* Enable breakpoint level 1 */ +#define MCFDEBUG_TDR_EBL2 0x20000000 /* Enable breakpoint level 2 */ +#define MCFDEBUG_TDR_EDLW1 0x00001000 /* Enable data BP longword */ +#define MCFDEBUG_TDR_EDLW2 0x10000000 +#define MCFDEBUG_TDR_EDWL1 0x00000800 /* Enable data BP lower word */ +#define MCFDEBUG_TDR_EDWL2 0x08000000 +#define MCFDEBUG_TDR_EDWU1 0x00000400 /* Enable data BP upper word */ +#define MCFDEBUG_TDR_EDWU2 0x04000000 +#define MCFDEBUG_TDR_EDLL1 0x00000200 /* Enable data BP low low byte */ +#define MCFDEBUG_TDR_EDLL2 0x02000000 +#define MCFDEBUG_TDR_EDLM1 0x00000100 /* Enable data BP low mid byte */ +#define MCFDEBUG_TDR_EDLM2 0x01000000 +#define MCFDEBUG_TDR_EDUM1 0x00000080 /* Enable data BP up mid byte */ +#define MCFDEBUG_TDR_EDUM2 0x00800000 +#define MCFDEBUG_TDR_EDUU1 0x00000040 /* Enable data BP up up byte */ +#define MCFDEBUG_TDR_EDUU2 0x00400000 +#define MCFDEBUG_TDR_DI1 0x00000020 /* Data BP invert */ +#define MCFDEBUG_TDR_DI2 0x00200000 +#define MCFDEBUG_TDR_EAI1 0x00000010 /* Enable address BP inverted */ +#define MCFDEBUG_TDR_EAI2 0x00100000 +#define MCFDEBUG_TDR_EAR1 0x00000008 /* Enable address BP range */ +#define MCFDEBUG_TDR_EAR2 0x00080000 +#define MCFDEBUG_TDR_EAL1 0x00000004 /* Enable address BP low */ +#define MCFDEBUG_TDR_EAL2 0x00040000 +#define MCFDEBUG_TDR_EPC1 0x00000002 /* Enable PC BP */ +#define MCFDEBUG_TDR_EPC2 0x00020000 +#define MCFDEBUG_TDR_PCI1 0x00000001 /* PC BP invert */ +#define MCFDEBUG_TDR_PCI2 0x00010000 + +/* Constants for the address attribute trigger register */ +#define MCFDEBUG_AAR_RESET 0x00000005 +/* Fields not yet implemented */ + +/* And some definitions for the writable sections of the CSR */ +#define MCFDEBUG_CSR_RESET 0x00100000 +#define MCFDEBUG_CSR_PSTCLK 0x00020000 /* PSTCLK disable */ +#define MCFDEBUG_CSR_IPW 0x00010000 /* Inhibit processor writes */ +#define MCFDEBUG_CSR_MAP 0x00008000 /* Processor refs in emul mode */ +#define MCFDEBUG_CSR_TRC 0x00004000 /* Emul mode on trace exception */ +#define MCFDEBUG_CSR_EMU 0x00002000 /* Force emulation mode */ +#define MCFDEBUG_CSR_DDC_READ 0x00000800 /* Debug data control */ +#define MCFDEBUG_CSR_DDC_WRITE 0x00001000 +#define MCFDEBUG_CSR_UHE 0x00000400 /* User mode halt enable */ +#define MCFDEBUG_CSR_BTB0 0x00000000 /* Branch target 0 bytes */ +#define MCFDEBUG_CSR_BTB2 0x00000100 /* Branch target 2 bytes */ +#define MCFDEBUG_CSR_BTB3 0x00000200 /* Branch target 3 bytes */ +#define MCFDEBUG_CSR_BTB4 0x00000300 /* Branch target 4 bytes */ +#define MCFDEBUG_CSR_NPL 0x00000040 /* Non-pipelined mode */ +#define MCFDEBUG_CSR_SSM 0x00000010 /* Single step mode */ + +/* Constants for the BDM address attribute register */ +#define MCFDEBUG_BAAR_RESET 0x00000005 +/* Fields not yet implemented */ + + +/* This routine wrappers up the wdebug asm instruction so that the register + * and value can be relatively easily specified. The biggest hassle here is + * that the debug module instructions (2 longs) must be long word aligned and + * some pointer fiddling is performed to ensure this. + */ +static inline void wdebug(int reg, unsigned long data) { + unsigned short dbg_spc[6]; + unsigned short *dbg; + + // Force alignment to long word boundary + dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc); + + // Build up the debug instruction + dbg[0] = 0x2c80 | (reg & 0xf); + dbg[1] = (data >> 16) & 0xffff; + dbg[2] = data & 0xffff; + dbg[3] = 0; + + // Perform the wdebug instruction +#if 0 + // This strain is for gas which doesn't have the wdebug instructions defined + asm( "move.l %0, %%a0\n\t" + ".word 0xfbd0\n\t" + ".word 0x0003\n\t" + :: "g" (dbg) : "a0"); +#else + // And this is for when it does + asm( "wdebug (%0)" :: "a" (dbg)); +#endif +} + +#endif diff --git a/arch/m68knommu/include/asm/md.h b/arch/m68knommu/include/asm/md.h new file mode 100644 index 000000000000..d810c78de5ff --- /dev/null +++ b/arch/m68knommu/include/asm/md.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/mman.h b/arch/m68knommu/include/asm/mman.h new file mode 100644 index 000000000000..4846c682efed --- /dev/null +++ b/arch/m68knommu/include/asm/mman.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/mmu.h b/arch/m68knommu/include/asm/mmu.h new file mode 100644 index 000000000000..5fa6b68353ba --- /dev/null +++ b/arch/m68knommu/include/asm/mmu.h @@ -0,0 +1,11 @@ +#ifndef __M68KNOMMU_MMU_H +#define __M68KNOMMU_MMU_H + +/* Copyright (C) 2002, David McCullough */ + +typedef struct { + struct vm_list_struct *vmlist; + unsigned long end_brk; +} mm_context_t; + +#endif /* __M68KNOMMU_MMU_H */ diff --git a/arch/m68knommu/include/asm/mmu_context.h b/arch/m68knommu/include/asm/mmu_context.h new file mode 100644 index 000000000000..9ccee4278c97 --- /dev/null +++ b/arch/m68knommu/include/asm/mmu_context.h @@ -0,0 +1,33 @@ +#ifndef __M68KNOMMU_MMU_CONTEXT_H +#define __M68KNOMMU_MMU_CONTEXT_H + +#include +#include +#include +#include + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +static inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + // mm->context = virt_to_phys(mm->pgd); + return(0); +} + +#define destroy_context(mm) do { } while(0) + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) +{ +} + +#define deactivate_mm(tsk,mm) do { } while (0) + +static inline void activate_mm(struct mm_struct *prev_mm, + struct mm_struct *next_mm) +{ +} + +#endif diff --git a/arch/m68knommu/include/asm/module.h b/arch/m68knommu/include/asm/module.h new file mode 100644 index 000000000000..2e45ab50b232 --- /dev/null +++ b/arch/m68knommu/include/asm/module.h @@ -0,0 +1,11 @@ +#ifndef ASM_M68KNOMMU_MODULE_H +#define ASM_M68KNOMMU_MODULE_H + +struct mod_arch_specific { +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +#endif /* ASM_M68KNOMMU_MODULE_H */ diff --git a/arch/m68knommu/include/asm/movs.h b/arch/m68knommu/include/asm/movs.h new file mode 100644 index 000000000000..81a16779e833 --- /dev/null +++ b/arch/m68knommu/include/asm/movs.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/msgbuf.h b/arch/m68knommu/include/asm/msgbuf.h new file mode 100644 index 000000000000..bdfadec4d52d --- /dev/null +++ b/arch/m68knommu/include/asm/msgbuf.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/mutex.h b/arch/m68knommu/include/asm/mutex.h new file mode 100644 index 000000000000..458c1f7fbc18 --- /dev/null +++ b/arch/m68knommu/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include diff --git a/arch/m68knommu/include/asm/nettel.h b/arch/m68knommu/include/asm/nettel.h new file mode 100644 index 000000000000..0299f6a2deeb --- /dev/null +++ b/arch/m68knommu/include/asm/nettel.h @@ -0,0 +1,108 @@ +/****************************************************************************/ + +/* + * nettel.h -- Lineo (formerly Moreton Bay) NETtel support. + * + * (C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com) + * (C) Copyright 2000-2001, Lineo Inc. (www.lineo.com) + * (C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com) + */ + +/****************************************************************************/ +#ifndef nettel_h +#define nettel_h +/****************************************************************************/ + + +/****************************************************************************/ +#ifdef CONFIG_NETtel +/****************************************************************************/ + +#ifdef CONFIG_COLDFIRE +#include +#include +#endif + +/*---------------------------------------------------------------------------*/ +#if defined(CONFIG_M5307) +/* + * NETtel/5307 based hardware first. DTR/DCD lines are wired to + * GPIO lines. Most of the LED's are driver through a latch + * connected to CS2. + */ +#define MCFPP_DCD1 0x0001 +#define MCFPP_DCD0 0x0002 +#define MCFPP_DTR1 0x0004 +#define MCFPP_DTR0 0x0008 + +#define NETtel_LEDADDR 0x30400000 + +#ifndef __ASSEMBLY__ + +extern volatile unsigned short ppdata; + +/* + * These functions defined to give quasi generic access to the + * PPIO bits used for DTR/DCD. + */ +static __inline__ unsigned int mcf_getppdata(void) +{ + volatile unsigned short *pp; + pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); + return((unsigned int) *pp); +} + +static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) +{ + volatile unsigned short *pp; + pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); + ppdata = (ppdata & ~mask) | bits; + *pp = ppdata; +} +#endif + +/*---------------------------------------------------------------------------*/ +#elif defined(CONFIG_M5206e) +/* + * NETtel/5206e based hardware has leds on latch on CS3. + * No support modem for lines?? + */ +#define NETtel_LEDADDR 0x50000000 + +/*---------------------------------------------------------------------------*/ +#elif defined(CONFIG_M5272) +/* + * NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines. + */ +#define MCFPP_DCD0 0x0080 +#define MCFPP_DCD1 0x0000 /* Port 1 no DCD support */ +#define MCFPP_DTR0 0x0040 +#define MCFPP_DTR1 0x0000 /* Port 1 no DTR support */ + +#ifndef __ASSEMBLY__ +/* + * These functions defined to give quasi generic access to the + * PPIO bits used for DTR/DCD. + */ +static __inline__ unsigned int mcf_getppdata(void) +{ + volatile unsigned short *pp; + pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT); + return((unsigned int) *pp); +} + +static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) +{ + volatile unsigned short *pp; + pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT); + *pp = (*pp & ~mask) | bits; +} +#endif + +#endif +/*---------------------------------------------------------------------------*/ + +/****************************************************************************/ +#endif /* CONFIG_NETtel */ +/****************************************************************************/ +#endif /* nettel_h */ diff --git a/arch/m68knommu/include/asm/openprom.h b/arch/m68knommu/include/asm/openprom.h new file mode 100644 index 000000000000..fdba7953ff9f --- /dev/null +++ b/arch/m68knommu/include/asm/openprom.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/oplib.h b/arch/m68knommu/include/asm/oplib.h new file mode 100644 index 000000000000..ce079dc332d9 --- /dev/null +++ b/arch/m68knommu/include/asm/oplib.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/page.h b/arch/m68knommu/include/asm/page.h new file mode 100644 index 000000000000..3a1ede4544cb --- /dev/null +++ b/arch/m68knommu/include/asm/page.h @@ -0,0 +1,77 @@ +#ifndef _M68KNOMMU_PAGE_H +#define _M68KNOMMU_PAGE_H + +/* PAGE_SHIFT determines the page size */ + +#define PAGE_SHIFT (12) +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#include + +#ifndef __ASSEMBLY__ + +#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) +#define free_user_page(page, addr) free_page(addr) + +#define clear_page(page) memset((page), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) + +#define clear_user_page(page, vaddr, pg) clear_page(page) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) + +#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ + alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) +#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pmd[16]; } pmd_t; +typedef struct { unsigned long pgd; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct page *pgtable_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((&x)->pmd[0]) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +extern unsigned long memory_start; +extern unsigned long memory_end; + +#endif /* !__ASSEMBLY__ */ + +#include + +#define PAGE_OFFSET (PAGE_OFFSET_RAW) + +#ifndef __ASSEMBLY__ + +#define __pa(vaddr) virt_to_phys((void *)(vaddr)) +#define __va(paddr) phys_to_virt((unsigned long)(paddr)) + +#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) +#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) + +#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) +#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) + +#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn)) +#define page_to_pfn(page) virt_to_pfn(page_to_virt(page)) +#define pfn_valid(pfn) ((pfn) < max_mapnr) + +#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \ + ((void *)(kaddr) < (void *)memory_end)) + +#endif /* __ASSEMBLY__ */ + +#include + +#endif /* _M68KNOMMU_PAGE_H */ diff --git a/arch/m68knommu/include/asm/page_offset.h b/arch/m68knommu/include/asm/page_offset.h new file mode 100644 index 000000000000..d4e73e0ba646 --- /dev/null +++ b/arch/m68knommu/include/asm/page_offset.h @@ -0,0 +1,5 @@ + + +/* This handles the memory map.. */ +#define PAGE_OFFSET_RAW CONFIG_RAMBASE + diff --git a/arch/m68knommu/include/asm/param.h b/arch/m68knommu/include/asm/param.h new file mode 100644 index 000000000000..6044397adb64 --- /dev/null +++ b/arch/m68knommu/include/asm/param.h @@ -0,0 +1,22 @@ +#ifndef _M68KNOMMU_PARAM_H +#define _M68KNOMMU_PARAM_H + +#ifdef __KERNEL__ +#define HZ CONFIG_HZ +#define USER_HZ HZ +#define CLOCKS_PER_SEC (USER_HZ) +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _M68KNOMMU_PARAM_H */ diff --git a/arch/m68knommu/include/asm/pci.h b/arch/m68knommu/include/asm/pci.h new file mode 100644 index 000000000000..a13f3cc87451 --- /dev/null +++ b/arch/m68knommu/include/asm/pci.h @@ -0,0 +1,29 @@ +#ifndef M68KNOMMU_PCI_H +#define M68KNOMMU_PCI_H + +#include + +#ifdef CONFIG_COMEMPCI +/* + * These are pretty much arbitary with the CoMEM implementation. + * We have the whole address space to ourselves. + */ +#define PCIBIOS_MIN_IO 0x100 +#define PCIBIOS_MIN_MEM 0x00010000 + +#define pcibios_scan_all_fns(a, b) 0 + +/* + * Return whether the given PCI device DMA address mask can + * be supported properly. For example, if your device can + * only drive the low 24-bits during PCI bus mastering, then + * you would pass 0x00ffffff as the mask to this function. + */ +static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask) +{ + return 1; +} + +#endif /* CONFIG_COMEMPCI */ + +#endif /* M68KNOMMU_PCI_H */ diff --git a/arch/m68knommu/include/asm/percpu.h b/arch/m68knommu/include/asm/percpu.h new file mode 100644 index 000000000000..5de72c327efd --- /dev/null +++ b/arch/m68knommu/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ARCH_M68KNOMMU_PERCPU__ +#define __ARCH_M68KNOMMU_PERCPU__ + +#include + +#endif /* __ARCH_M68KNOMMU_PERCPU__ */ diff --git a/arch/m68knommu/include/asm/pgalloc.h b/arch/m68knommu/include/asm/pgalloc.h new file mode 100644 index 000000000000..d6352f671ec0 --- /dev/null +++ b/arch/m68knommu/include/asm/pgalloc.h @@ -0,0 +1,8 @@ +#ifndef _M68KNOMMU_PGALLOC_H +#define _M68KNOMMU_PGALLOC_H + +#include + +#define check_pgt_cache() do { } while (0) + +#endif /* _M68KNOMMU_PGALLOC_H */ diff --git a/arch/m68knommu/include/asm/pgtable.h b/arch/m68knommu/include/asm/pgtable.h new file mode 100644 index 000000000000..46251016e821 --- /dev/null +++ b/arch/m68knommu/include/asm/pgtable.h @@ -0,0 +1,70 @@ +#ifndef _M68KNOMMU_PGTABLE_H +#define _M68KNOMMU_PGTABLE_H + +#include + +/* + * (C) Copyright 2000-2002, Greg Ungerer + */ + +#include +#include +#include +#include + +/* + * Trivial page table functions. + */ +#define pgd_present(pgd) (1) +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_clear(pgdp) +#define kern_addr_valid(addr) (1) +#define pmd_offset(a, b) ((void *)0) + +#define PAGE_NONE __pgprot(0) +#define PAGE_SHARED __pgprot(0) +#define PAGE_COPY __pgprot(0) +#define PAGE_READONLY __pgprot(0) +#define PAGE_KERNEL __pgprot(0) + +extern void paging_init(void); +#define swapper_pg_dir ((pgd_t *) 0) + +#define __swp_type(x) (0) +#define __swp_offset(x) (0) +#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +static inline int pte_file(pte_t pte) { return 0; } + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +#define ZERO_PAGE(vaddr) (virt_to_page(0)) + +/* + * These would be in other places but having them here reduces the diffs. + */ +extern unsigned int kobjsize(const void *objp); + +/* + * No page table caches to initialise. + */ +#define pgtable_cache_init() do { } while (0) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +/* + * All 32bit addresses are effectively valid for vmalloc... + * Sort of meaningless for non-VM targets. + */ +#define VMALLOC_START 0 +#define VMALLOC_END 0xffffffff + +#include + +#endif /* _M68KNOMMU_PGTABLE_H */ diff --git a/arch/m68knommu/include/asm/poll.h b/arch/m68knommu/include/asm/poll.h new file mode 100644 index 000000000000..ee1b6cb549ca --- /dev/null +++ b/arch/m68knommu/include/asm/poll.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/posix_types.h b/arch/m68knommu/include/asm/posix_types.h new file mode 100644 index 000000000000..6205fb9392a3 --- /dev/null +++ b/arch/m68knommu/include/asm/posix_types.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/processor.h b/arch/m68knommu/include/asm/processor.h new file mode 100644 index 000000000000..91cba18acdd3 --- /dev/null +++ b/arch/m68knommu/include/asm/processor.h @@ -0,0 +1,143 @@ +/* + * include/asm-m68knommu/processor.h + * + * Copyright (C) 1995 Hamish Macdonald + */ + +#ifndef __ASM_M68K_PROCESSOR_H +#define __ASM_M68K_PROCESSOR_H + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#include +#include +#include +#include +#include +#include +#include + +static inline unsigned long rdusp(void) +{ +#ifdef CONFIG_COLDFIRE + extern unsigned int sw_usp; + return(sw_usp); +#else + unsigned long usp; + __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); + return usp; +#endif +} + +static inline void wrusp(unsigned long usp) +{ +#ifdef CONFIG_COLDFIRE + extern unsigned int sw_usp; + sw_usp = usp; +#else + __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); +#endif +} + +/* + * User space process size: 3.75GB. This is hardcoded into a few places, + * so don't change it unless you know what you are doing. + */ +#define TASK_SIZE (0xF0000000UL) + +/* + * This decides where the kernel will search for a free chunk of vm + * space during mmap's. We won't be using it + */ +#define TASK_UNMAPPED_BASE 0 + +/* + * if you change this structure, you must change the code and offsets + * in m68k/machasm.S + */ + +struct thread_struct { + unsigned long ksp; /* kernel stack pointer */ + unsigned long usp; /* user stack pointer */ + unsigned short sr; /* saved status register */ + unsigned short fs; /* saved fs (sfc, dfc) */ + unsigned long crp[2]; /* cpu root pointer */ + unsigned long esp0; /* points to SR of stack frame */ + unsigned long fp[8*3]; + unsigned long fpcntl[3]; /* fp control regs */ + unsigned char fpstate[FPSTATESIZE]; /* floating point state */ +}; + +#define INIT_THREAD { \ + sizeof(init_stack) + (unsigned long) init_stack, 0, \ + PS_S, __KERNEL_DS, \ + {0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \ +} + +/* + * Coldfire stacks need to be re-aligned on trap exit, conventional + * 68k can handle this case cleanly. + */ +#if defined(CONFIG_COLDFIRE) +#define reformat(_regs) do { (_regs)->format = 0x4; } while(0) +#else +#define reformat(_regs) do { } while (0) +#endif + +/* + * Do necessary setup to start up a newly executed thread. + * + * pass the data segment into user programs if it exists, + * it can't hurt anything as far as I can tell + */ +#define start_thread(_regs, _pc, _usp) \ +do { \ + set_fs(USER_DS); /* reads from user space */ \ + (_regs)->pc = (_pc); \ + ((struct switch_stack *)(_regs))[-1].a6 = 0; \ + reformat(_regs); \ + if (current->mm) \ + (_regs)->d5 = current->mm->start_data; \ + (_regs)->sr &= ~0x2000; \ + wrusp(_usp); \ +} while(0) + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ +} + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* + * Free current thread data structures etc.. + */ +static inline void exit_thread(void) +{ +} + +unsigned long thread_saved_pc(struct task_struct *tsk); +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) \ + ({ \ + unsigned long eip = 0; \ + if ((tsk)->thread.esp0 > PAGE_SIZE && \ + (virt_addr_valid((tsk)->thread.esp0))) \ + eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ + eip; }) +#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) + +#define cpu_relax() barrier() + +#endif diff --git a/arch/m68knommu/include/asm/ptrace.h b/arch/m68knommu/include/asm/ptrace.h new file mode 100644 index 000000000000..8c9194b98548 --- /dev/null +++ b/arch/m68knommu/include/asm/ptrace.h @@ -0,0 +1,87 @@ +#ifndef _M68K_PTRACE_H +#define _M68K_PTRACE_H + +#define PT_D1 0 +#define PT_D2 1 +#define PT_D3 2 +#define PT_D4 3 +#define PT_D5 4 +#define PT_D6 5 +#define PT_D7 6 +#define PT_A0 7 +#define PT_A1 8 +#define PT_A2 9 +#define PT_A3 10 +#define PT_A4 11 +#define PT_A5 12 +#define PT_A6 13 +#define PT_D0 14 +#define PT_USP 15 +#define PT_ORIG_D0 16 +#define PT_SR 17 +#define PT_PC 18 + +#ifndef __ASSEMBLY__ + +/* this struct defines the way the registers are stored on the + stack during a system call. */ + +struct pt_regs { + long d1; + long d2; + long d3; + long d4; + long d5; + long a0; + long a1; + long a2; + long d0; + long orig_d0; + long stkadj; +#ifdef CONFIG_COLDFIRE + unsigned format : 4; /* frame format specifier */ + unsigned vector : 12; /* vector offset */ + unsigned short sr; + unsigned long pc; +#else + unsigned short sr; + unsigned long pc; + unsigned format : 4; /* frame format specifier */ + unsigned vector : 12; /* vector offset */ +#endif +}; + +/* + * This is the extended stack used by signal handlers and the context + * switcher: it's pushed after the normal "struct pt_regs". + */ +struct switch_stack { + unsigned long d6; + unsigned long d7; + unsigned long a3; + unsigned long a4; + unsigned long a5; + unsigned long a6; + unsigned long retpc; +}; + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 + +#ifdef __KERNEL__ + +#ifndef PS_S +#define PS_S (0x2000) +#define PS_M (0x1000) +#endif + +#define user_mode(regs) (!((regs)->sr & PS_S)) +#define instruction_pointer(regs) ((regs)->pc) +#define profile_pc(regs) instruction_pointer(regs) +extern void show_regs(struct pt_regs *); +#endif /* __KERNEL__ */ +#endif /* __ASSEMBLY__ */ +#endif /* _M68K_PTRACE_H */ diff --git a/arch/m68knommu/include/asm/quicc_simple.h b/arch/m68knommu/include/asm/quicc_simple.h new file mode 100644 index 000000000000..c3636932d4bc --- /dev/null +++ b/arch/m68knommu/include/asm/quicc_simple.h @@ -0,0 +1,52 @@ +/*********************************** + * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $ + *********************************** + * + *************************************** + * Simple drivers common header + *************************************** + */ + +#ifndef __SIMPLE_H +#define __SIMPLE_H + +/* #include "quicc.h" */ + +#define GLB_SCC_0 0 +#define GLB_SCC_1 1 +#define GLB_SCC_2 2 +#define GLB_SCC_3 3 + +typedef void (int_routine)(unsigned short interrupt_event); +typedef int_routine *int_routine_ptr; +typedef void *(alloc_routine)(int length); +typedef void (free_routine)(int scc_num, int channel_num, void *buf); +typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length); +typedef int (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd); +typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd); +typedef void (handle_lost_error_routine)(int scc_num, int channel_num); + +/* user defined functions for global errors */ +typedef void (handle_glob_overrun_routine)(int scc_number); +typedef void (handle_glob_underrun_routine)(int scc_number); +typedef void (glob_intr_q_overflow_routine)(int scc_number); + +/* + * General initialization and command routines + */ +void quicc_issue_cmd (unsigned short cmd, int scc_num); +void quicc_init(void); +void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf); +void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf); +void quicc_scc_start(int scc_num); +void quicc_scc_loopback(int scc_num); + +/* Interrupt enable/disable routines for critical pieces of code*/ +unsigned short IntrDis(void); +void IntrEna(unsigned short old_sr); + +/* For debugging */ +void print_rbd(int scc_num); +void print_tbd(int scc_num); + +#endif diff --git a/arch/m68knommu/include/asm/resource.h b/arch/m68knommu/include/asm/resource.h new file mode 100644 index 000000000000..7fa63d5ea576 --- /dev/null +++ b/arch/m68knommu/include/asm/resource.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/rtc.h b/arch/m68knommu/include/asm/rtc.h new file mode 100644 index 000000000000..eaf18ec83c8e --- /dev/null +++ b/arch/m68knommu/include/asm/rtc.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/scatterlist.h b/arch/m68knommu/include/asm/scatterlist.h new file mode 100644 index 000000000000..afc4788b0d2c --- /dev/null +++ b/arch/m68knommu/include/asm/scatterlist.h @@ -0,0 +1,22 @@ +#ifndef _M68KNOMMU_SCATTERLIST_H +#define _M68KNOMMU_SCATTERLIST_H + +#include +#include + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + dma_addr_t dma_address; + unsigned int length; +}; + +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#define ISA_DMA_THRESHOLD (0xffffffff) + +#endif /* !(_M68KNOMMU_SCATTERLIST_H) */ diff --git a/arch/m68knommu/include/asm/sections.h b/arch/m68knommu/include/asm/sections.h new file mode 100644 index 000000000000..dd0ecb98ec08 --- /dev/null +++ b/arch/m68knommu/include/asm/sections.h @@ -0,0 +1,7 @@ +#ifndef _M68KNOMMU_SECTIONS_H +#define _M68KNOMMU_SECTIONS_H + +/* nothing to see, move along */ +#include + +#endif diff --git a/arch/m68knommu/include/asm/segment.h b/arch/m68knommu/include/asm/segment.h new file mode 100644 index 000000000000..42318ebec7ec --- /dev/null +++ b/arch/m68knommu/include/asm/segment.h @@ -0,0 +1,51 @@ +#ifndef _M68K_SEGMENT_H +#define _M68K_SEGMENT_H + +/* define constants */ +/* Address spaces (FC0-FC2) */ +#define USER_DATA (1) +#ifndef __USER_DS +#define __USER_DS (USER_DATA) +#endif +#define USER_PROGRAM (2) +#define SUPER_DATA (5) +#ifndef __KERNEL_DS +#define __KERNEL_DS (SUPER_DATA) +#endif +#define SUPER_PROGRAM (6) +#define CPU_SPACE (7) + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) +#define USER_DS MAKE_MM_SEG(__USER_DS) +#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS) + +/* + * Get/set the SFC/DFC registers for MOVES instructions + */ + +static inline mm_segment_t get_fs(void) +{ + return USER_DS; +} + +static inline mm_segment_t get_ds(void) +{ + /* return the supervisor data space code */ + return KERNEL_DS; +} + +static inline void set_fs(mm_segment_t val) +{ +} + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#endif /* __ASSEMBLY__ */ + +#endif /* _M68K_SEGMENT_H */ diff --git a/arch/m68knommu/include/asm/sembuf.h b/arch/m68knommu/include/asm/sembuf.h new file mode 100644 index 000000000000..3a634f9ecf50 --- /dev/null +++ b/arch/m68knommu/include/asm/sembuf.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/setup.h b/arch/m68knommu/include/asm/setup.h new file mode 100644 index 000000000000..fb86bb2a6078 --- /dev/null +++ b/arch/m68knommu/include/asm/setup.h @@ -0,0 +1,10 @@ +#ifdef __KERNEL__ + +#include + +/* We have a bigger command line buffer. */ +#undef COMMAND_LINE_SIZE + +#endif /* __KERNEL__ */ + +#define COMMAND_LINE_SIZE 512 diff --git a/arch/m68knommu/include/asm/shm.h b/arch/m68knommu/include/asm/shm.h new file mode 100644 index 000000000000..cc8e522d9050 --- /dev/null +++ b/arch/m68knommu/include/asm/shm.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/shmbuf.h b/arch/m68knommu/include/asm/shmbuf.h new file mode 100644 index 000000000000..bc34cf8eefce --- /dev/null +++ b/arch/m68knommu/include/asm/shmbuf.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/shmparam.h b/arch/m68knommu/include/asm/shmparam.h new file mode 100644 index 000000000000..d7ee69648ebf --- /dev/null +++ b/arch/m68knommu/include/asm/shmparam.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/sigcontext.h b/arch/m68knommu/include/asm/sigcontext.h new file mode 100644 index 000000000000..36c293fc133d --- /dev/null +++ b/arch/m68knommu/include/asm/sigcontext.h @@ -0,0 +1,17 @@ +#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H +#define _ASM_M68KNOMMU_SIGCONTEXT_H + +struct sigcontext { + unsigned long sc_mask; /* old sigmask */ + unsigned long sc_usp; /* old user stack pointer */ + unsigned long sc_d0; + unsigned long sc_d1; + unsigned long sc_a0; + unsigned long sc_a1; + unsigned long sc_a5; + unsigned short sc_sr; + unsigned long sc_pc; + unsigned short sc_formatvec; +}; + +#endif diff --git a/arch/m68knommu/include/asm/siginfo.h b/arch/m68knommu/include/asm/siginfo.h new file mode 100644 index 000000000000..b18e5f4064ae --- /dev/null +++ b/arch/m68knommu/include/asm/siginfo.h @@ -0,0 +1,6 @@ +#ifndef _M68KNOMMU_SIGINFO_H +#define _M68KNOMMU_SIGINFO_H + +#include + +#endif diff --git a/arch/m68knommu/include/asm/signal.h b/arch/m68knommu/include/asm/signal.h new file mode 100644 index 000000000000..216c08be54a0 --- /dev/null +++ b/arch/m68knommu/include/asm/signal.h @@ -0,0 +1,159 @@ +#ifndef _M68KNOMMU_SIGNAL_H +#define _M68KNOMMU_SIGNAL_H + +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ + +#include +#undef __HAVE_ARCH_SIG_BITOPS + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _M68KNOMMU_SIGNAL_H */ diff --git a/arch/m68knommu/include/asm/smp.h b/arch/m68knommu/include/asm/smp.h new file mode 100644 index 000000000000..9e9bd7e58922 --- /dev/null +++ b/arch/m68knommu/include/asm/smp.h @@ -0,0 +1 @@ +/* nothing required here yet */ diff --git a/arch/m68knommu/include/asm/socket.h b/arch/m68knommu/include/asm/socket.h new file mode 100644 index 000000000000..ac5478bf6371 --- /dev/null +++ b/arch/m68knommu/include/asm/socket.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/sockios.h b/arch/m68knommu/include/asm/sockios.h new file mode 100644 index 000000000000..dcc6a8900ce2 --- /dev/null +++ b/arch/m68knommu/include/asm/sockios.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/spinlock.h b/arch/m68knommu/include/asm/spinlock.h new file mode 100644 index 000000000000..6bb1f06c4781 --- /dev/null +++ b/arch/m68knommu/include/asm/spinlock.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/stat.h b/arch/m68knommu/include/asm/stat.h new file mode 100644 index 000000000000..3d4b260e7c03 --- /dev/null +++ b/arch/m68knommu/include/asm/stat.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/statfs.h b/arch/m68knommu/include/asm/statfs.h new file mode 100644 index 000000000000..2ce99eaf0970 --- /dev/null +++ b/arch/m68knommu/include/asm/statfs.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/string.h b/arch/m68knommu/include/asm/string.h new file mode 100644 index 000000000000..af09e17000fc --- /dev/null +++ b/arch/m68knommu/include/asm/string.h @@ -0,0 +1,126 @@ +#ifndef _M68KNOMMU_STRING_H_ +#define _M68KNOMMU_STRING_H_ + +#ifdef __KERNEL__ /* only set these up for kernel code */ + +#include +#include + +#define __HAVE_ARCH_STRCPY +static inline char * strcpy(char * dest,const char *src) +{ + char *xdest = dest; + + __asm__ __volatile__ + ("1:\tmoveb %1@+,%0@+\n\t" + "jne 1b" + : "=a" (dest), "=a" (src) + : "0" (dest), "1" (src) : "memory"); + return xdest; +} + +#define __HAVE_ARCH_STRNCPY +static inline char * strncpy(char *dest, const char *src, size_t n) +{ + char *xdest = dest; + + if (n == 0) + return xdest; + + __asm__ __volatile__ + ("1:\tmoveb %1@+,%0@+\n\t" + "jeq 2f\n\t" + "subql #1,%2\n\t" + "jne 1b\n\t" + "2:" + : "=a" (dest), "=a" (src), "=d" (n) + : "0" (dest), "1" (src), "2" (n) + : "memory"); + return xdest; +} + + +#ifndef CONFIG_COLDFIRE + +#define __HAVE_ARCH_STRCMP +static inline int strcmp(const char * cs,const char * ct) +{ + char __res; + + __asm__ + ("1:\tmoveb %0@+,%2\n\t" /* get *cs */ + "cmpb %1@+,%2\n\t" /* compare a byte */ + "jne 2f\n\t" /* not equal, break out */ + "tstb %2\n\t" /* at end of cs? */ + "jne 1b\n\t" /* no, keep going */ + "jra 3f\n\t" /* strings are equal */ + "2:\tsubb %1@-,%2\n\t" /* *cs - *ct */ + "3:" + : "=a" (cs), "=a" (ct), "=d" (__res) + : "0" (cs), "1" (ct)); + + return __res; +} + +#define __HAVE_ARCH_STRNCMP +static inline int strncmp(const char * cs,const char * ct,size_t count) +{ + char __res; + + if (!count) + return 0; + __asm__ + ("1:\tmovb %0@+,%3\n\t" /* get *cs */ + "cmpb %1@+,%3\n\t" /* compare a byte */ + "jne 3f\n\t" /* not equal, break out */ + "tstb %3\n\t" /* at end of cs? */ + "jeq 4f\n\t" /* yes, all done */ + "subql #1,%2\n\t" /* no, adjust count */ + "jne 1b\n\t" /* more to do, keep going */ + "2:\tmoveq #0,%3\n\t" /* strings are equal */ + "jra 4f\n\t" + "3:\tsubb %1@-,%3\n\t" /* *cs - *ct */ + "4:" + : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res) + : "0" (cs), "1" (ct), "2" (count)); + return __res; +} + +#endif /* CONFIG_COLDFIRE */ + +#define __HAVE_ARCH_MEMSET +extern void * memset(void * s, int c, size_t count); + +#define __HAVE_ARCH_MEMCPY +extern void * memcpy(void *d, const void *s, size_t count); + +#else /* KERNEL */ + +/* + * let user libraries deal with these, + * IMHO the kernel has no place defining these functions for user apps + */ + +#define __HAVE_ARCH_STRCPY 1 +#define __HAVE_ARCH_STRNCPY 1 +#define __HAVE_ARCH_STRCAT 1 +#define __HAVE_ARCH_STRNCAT 1 +#define __HAVE_ARCH_STRCMP 1 +#define __HAVE_ARCH_STRNCMP 1 +#define __HAVE_ARCH_STRNICMP 1 +#define __HAVE_ARCH_STRCHR 1 +#define __HAVE_ARCH_STRRCHR 1 +#define __HAVE_ARCH_STRSTR 1 +#define __HAVE_ARCH_STRLEN 1 +#define __HAVE_ARCH_STRNLEN 1 +#define __HAVE_ARCH_MEMSET 1 +#define __HAVE_ARCH_MEMCPY 1 +#define __HAVE_ARCH_MEMMOVE 1 +#define __HAVE_ARCH_MEMSCAN 1 +#define __HAVE_ARCH_MEMCMP 1 +#define __HAVE_ARCH_MEMCHR 1 +#define __HAVE_ARCH_STRTOK 1 + +#endif /* KERNEL */ + +#endif /* _M68K_STRING_H_ */ diff --git a/arch/m68knommu/include/asm/system.h b/arch/m68knommu/include/asm/system.h new file mode 100644 index 000000000000..40f49de69821 --- /dev/null +++ b/arch/m68knommu/include/asm/system.h @@ -0,0 +1,324 @@ +#ifndef _M68KNOMMU_SYSTEM_H +#define _M68KNOMMU_SYSTEM_H + +#include +#include +#include + +/* + * switch_to(n) should switch tasks to task ptr, first checking that + * ptr isn't the current task, in which case it does nothing. This + * also clears the TS-flag if the task we switched to has used the + * math co-processor latest. + */ +/* + * switch_to() saves the extra registers, that are not saved + * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and + * a0-a1. Some of these are used by schedule() and its predecessors + * and so we might get see unexpected behaviors when a task returns + * with unexpected register values. + * + * syscall stores these registers itself and none of them are used + * by syscall after the function in the syscall has been called. + * + * Beware that resume now expects *next to be in d1 and the offset of + * tss to be in a1. This saves a few instructions as we no longer have + * to push them onto the stack and read them back right after. + * + * 02/17/96 - Jes Sorensen (jds@kom.auc.dk) + * + * Changed 96/09/19 by Andreas Schwab + * pass prev in a0, next in a1, offset of tss in d1, and whether + * the mm structures are shared in d2 (to avoid atc flushing). + */ +asmlinkage void resume(void); +#define switch_to(prev,next,last) \ +{ \ + void *_last; \ + __asm__ __volatile__( \ + "movel %1, %%a0\n\t" \ + "movel %2, %%a1\n\t" \ + "jbsr resume\n\t" \ + "movel %%d1, %0\n\t" \ + : "=d" (_last) \ + : "d" (prev), "d" (next) \ + : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1"); \ + (last) = _last; \ +} + +#ifdef CONFIG_COLDFIRE +#define local_irq_enable() __asm__ __volatile__ ( \ + "move %/sr,%%d0\n\t" \ + "andi.l #0xf8ff,%%d0\n\t" \ + "move %%d0,%/sr\n" \ + : /* no outputs */ \ + : \ + : "cc", "%d0", "memory") +#define local_irq_disable() __asm__ __volatile__ ( \ + "move %/sr,%%d0\n\t" \ + "ori.l #0x0700,%%d0\n\t" \ + "move %%d0,%/sr\n" \ + : /* no outputs */ \ + : \ + : "cc", "%d0", "memory") +/* For spinlocks etc */ +#define local_irq_save(x) __asm__ __volatile__ ( \ + "movew %%sr,%0\n\t" \ + "movew #0x0700,%%d0\n\t" \ + "or.l %0,%%d0\n\t" \ + "movew %%d0,%/sr" \ + : "=d" (x) \ + : \ + : "cc", "%d0", "memory") +#else + +/* portable version */ /* FIXME - see entry.h*/ +#define ALLOWINT 0xf8ff + +#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory") +#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory") +#endif + +#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory") +#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory") + +/* For spinlocks etc */ +#ifndef local_irq_save +#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0) +#endif + +#define irqs_disabled() \ +({ \ + unsigned long flags; \ + local_save_flags(flags); \ + ((flags & 0x0700) == 0x0700); \ +}) + +#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc") + +/* + * Force strict CPU ordering. + * Not really required on m68k... + */ +#define nop() asm volatile ("nop"::) +#define mb() asm volatile ("" : : :"memory") +#define rmb() asm volatile ("" : : :"memory") +#define wmb() asm volatile ("" : : :"memory") +#define set_mb(var, value) ({ (var) = (value); wmb(); }) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while(0) +#endif + +#define read_barrier_depends() ((void)0) + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + +struct __xchg_dummy { unsigned long a[100]; }; +#define __xg(x) ((volatile struct __xchg_dummy *)(x)) + +#ifndef CONFIG_RMW_INSNS +static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) +{ + unsigned long tmp, flags; + + local_irq_save(flags); + + switch (size) { + case 1: + __asm__ __volatile__ + ("moveb %2,%0\n\t" + "moveb %1,%2" + : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 2: + __asm__ __volatile__ + ("movew %2,%0\n\t" + "movew %1,%2" + : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 4: + __asm__ __volatile__ + ("movel %2,%0\n\t" + "movel %1,%2" + : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + } + local_irq_restore(flags); + return tmp; +} +#else +static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) +{ + switch (size) { + case 1: + __asm__ __volatile__ + ("moveb %2,%0\n\t" + "1:\n\t" + "casb %0,%1,%2\n\t" + "jne 1b" + : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 2: + __asm__ __volatile__ + ("movew %2,%0\n\t" + "1:\n\t" + "casw %0,%1,%2\n\t" + "jne 1b" + : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 4: + __asm__ __volatile__ + ("movel %2,%0\n\t" + "1:\n\t" + "casl %0,%1,%2\n\t" + "jne 1b" + : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + } + return x; +} +#endif + +#include + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#ifndef CONFIG_SMP +#include +#endif + +#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \ + defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 ) +#define HARD_RESET_NOW() ({ \ + local_irq_disable(); \ + asm(" \ + moveal #0x10c00000, %a0; \ + moveb #0, 0xFFFFF300; \ + moveal 0(%a0), %sp; \ + moveal 4(%a0), %a0; \ + jmp (%a0); \ + "); \ +}) +#endif + +#ifdef CONFIG_COLDFIRE +#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) +/* + * Need to account for broken early mask of 5272 silicon. So don't + * jump through the original start address. Jump strait into the + * known start of the FLASH code. + */ +#define HARD_RESET_NOW() ({ \ + asm(" \ + movew #0x2700, %sr; \ + jmp 0xf0000400; \ + "); \ +}) +#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \ + defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA) +#define HARD_RESET_NOW() ({ \ + asm(" \ + movew #0x2700, %sr; \ + moveal #0x10000044, %a0; \ + movel #0xffffffff, (%a0); \ + moveal #0x10000001, %a0; \ + moveb #0x00, (%a0); \ + moveal #0xf0000004, %a0; \ + moveal (%a0), %a0; \ + jmp (%a0); \ + "); \ +}) +#elif defined(CONFIG_M5272) +/* + * Retrieve the boot address in flash using CSBR0 and CSOR0 + * find the reset vector at flash_address + 4 (e.g. 0x400) + * remap it in the flash's current location (e.g. 0xf0000400) + * and jump there. + */ +#define HARD_RESET_NOW() ({ \ + asm(" \ + movew #0x2700, %%sr; \ + move.l %0+0x40,%%d0; \ + and.l %0+0x44,%%d0; \ + andi.l #0xfffff000,%%d0; \ + mov.l %%d0,%%a0; \ + or.l 4(%%a0),%%d0; \ + mov.l %%d0,%%a0; \ + jmp (%%a0);" \ + : /* No output */ \ + : "o" (*(char *)MCF_MBAR) ); \ +}) +#elif defined(CONFIG_M528x) +/* + * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR), + * that when set, resets the MCF528x. + */ +#define HARD_RESET_NOW() \ +({ \ + unsigned char volatile *reset; \ + asm("move.w #0x2700, %sr"); \ + reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000)); \ + while(1) \ + *reset |= (0x01 << 7);\ +}) +#elif defined(CONFIG_M523x) +#define HARD_RESET_NOW() ({ \ + asm(" \ + movew #0x2700, %sr; \ + movel #0x01000000, %sp; \ + moveal #0x40110000, %a0; \ + moveb #0x80, (%a0); \ + "); \ +}) +#elif defined(CONFIG_M520x) + /* + * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register + * RCR), that when set, resets the MCF5208. + */ +#define HARD_RESET_NOW() \ +({ \ + unsigned char volatile *reset; \ + asm("move.w #0x2700, %sr"); \ + reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000)); \ + while(1) \ + *reset |= 0x80; \ +}) +#else +#define HARD_RESET_NOW() ({ \ + asm(" \ + movew #0x2700, %sr; \ + moveal #0x4, %a0; \ + moveal (%a0), %a0; \ + jmp (%a0); \ + "); \ +}) +#endif +#endif +#define arch_align_stack(x) (x) + + +static inline int irqs_disabled_flags(unsigned long flags) +{ + if (flags & 0x0700) + return 0; + else + return 1; +} + +#endif /* _M68KNOMMU_SYSTEM_H */ diff --git a/arch/m68knommu/include/asm/termbits.h b/arch/m68knommu/include/asm/termbits.h new file mode 100644 index 000000000000..05dd6bc27285 --- /dev/null +++ b/arch/m68knommu/include/asm/termbits.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/termios.h b/arch/m68knommu/include/asm/termios.h new file mode 100644 index 000000000000..e7337881a985 --- /dev/null +++ b/arch/m68knommu/include/asm/termios.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/thread_info.h b/arch/m68knommu/include/asm/thread_info.h new file mode 100644 index 000000000000..0c9bc095f3f0 --- /dev/null +++ b/arch/m68knommu/include/asm/thread_info.h @@ -0,0 +1,98 @@ +/* thread_info.h: m68knommu low-level thread information + * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com) + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#include + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +/* + * Size of kernel stack for each process. This must be a power of 2... + */ +#ifdef CONFIG_4KSTACKS +#define THREAD_SIZE_ORDER (0) +#else +#define THREAD_SIZE_ORDER (1) +#endif + +/* + * for asm files, THREAD_SIZE is now generated by asm-offsets.c + */ +#define THREAD_SIZE (PAGE_SIZE< preemptable, <0 => BUG */ + struct restart_block restart_block; +}; + +/* + * macros/functions for gaining access to the thread information structure + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + __asm__( + "move.l %%sp, %0 \n\t" + "and.l %1, %0" + : "=&d"(ti) + : "di" (~(THREAD_SIZE-1)) + ); + return ti; +} + +#endif /* __ASSEMBLY__ */ + +#define PREEMPT_ACTIVE 0x4000000 + +/* + * thread information flag bit numbers + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling + TIF_NEED_RESCHED */ +#define TIF_MEMDIE 4 + +/* as above, but as bit values */ +#define _TIF_SYSCALL_TRACE (1< +#define CLOCK_TICK_RATE MCF_CLK +#else +#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ +#endif + +typedef unsigned long cycles_t; + +static inline cycles_t get_cycles(void) +{ + return 0; +} + +#endif diff --git a/arch/m68knommu/include/asm/tlb.h b/arch/m68knommu/include/asm/tlb.h new file mode 100644 index 000000000000..77a7c51ca299 --- /dev/null +++ b/arch/m68knommu/include/asm/tlb.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/tlbflush.h b/arch/m68knommu/include/asm/tlbflush.h new file mode 100644 index 000000000000..a470cfb803eb --- /dev/null +++ b/arch/m68knommu/include/asm/tlbflush.h @@ -0,0 +1,55 @@ +#ifndef _M68KNOMMU_TLBFLUSH_H +#define _M68KNOMMU_TLBFLUSH_H + +/* + * Copyright (C) 2000 Lineo, David McCullough + * Copyright (C) 2000-2002, Greg Ungerer + */ + +#include + +/* + * flush all user-space atc entries. + */ +static inline void __flush_tlb(void) +{ + BUG(); +} + +static inline void __flush_tlb_one(unsigned long addr) +{ + BUG(); +} + +#define flush_tlb() __flush_tlb() + +/* + * flush all atc entries (both kernel and user-space entries). + */ +static inline void flush_tlb_all(void) +{ + BUG(); +} + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + BUG(); +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) +{ + BUG(); +} + +static inline void flush_tlb_range(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + BUG(); +} + +static inline void flush_tlb_kernel_page(unsigned long addr) +{ + BUG(); +} + +#endif /* _M68KNOMMU_TLBFLUSH_H */ diff --git a/arch/m68knommu/include/asm/topology.h b/arch/m68knommu/include/asm/topology.h new file mode 100644 index 000000000000..ca173e9f26ff --- /dev/null +++ b/arch/m68knommu/include/asm/topology.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M68K_TOPOLOGY_H +#define _ASM_M68K_TOPOLOGY_H + +#include + +#endif /* _ASM_M68K_TOPOLOGY_H */ diff --git a/arch/m68knommu/include/asm/traps.h b/arch/m68knommu/include/asm/traps.h new file mode 100644 index 000000000000..d0671e5f8e29 --- /dev/null +++ b/arch/m68knommu/include/asm/traps.h @@ -0,0 +1,154 @@ +/* + * linux/include/asm/traps.h + * + * Copyright (C) 1993 Hamish Macdonald + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _M68KNOMMU_TRAPS_H +#define _M68KNOMMU_TRAPS_H + +#ifndef __ASSEMBLY__ + +typedef void (*e_vector)(void); + +extern e_vector vectors[]; +extern void init_vectors(void); +extern void enable_vector(unsigned int irq); +extern void disable_vector(unsigned int irq); +extern void ack_vector(unsigned int irq); + +#endif + +#define VEC_BUSERR (2) +#define VEC_ADDRERR (3) +#define VEC_ILLEGAL (4) +#define VEC_ZERODIV (5) +#define VEC_CHK (6) +#define VEC_TRAP (7) +#define VEC_PRIV (8) +#define VEC_TRACE (9) +#define VEC_LINE10 (10) +#define VEC_LINE11 (11) +#define VEC_RESV1 (12) +#define VEC_COPROC (13) +#define VEC_FORMAT (14) +#define VEC_UNINT (15) +#define VEC_SPUR (24) +#define VEC_INT1 (25) +#define VEC_INT2 (26) +#define VEC_INT3 (27) +#define VEC_INT4 (28) +#define VEC_INT5 (29) +#define VEC_INT6 (30) +#define VEC_INT7 (31) +#define VEC_SYS (32) +#define VEC_TRAP1 (33) +#define VEC_TRAP2 (34) +#define VEC_TRAP3 (35) +#define VEC_TRAP4 (36) +#define VEC_TRAP5 (37) +#define VEC_TRAP6 (38) +#define VEC_TRAP7 (39) +#define VEC_TRAP8 (40) +#define VEC_TRAP9 (41) +#define VEC_TRAP10 (42) +#define VEC_TRAP11 (43) +#define VEC_TRAP12 (44) +#define VEC_TRAP13 (45) +#define VEC_TRAP14 (46) +#define VEC_TRAP15 (47) +#define VEC_FPBRUC (48) +#define VEC_FPIR (49) +#define VEC_FPDIVZ (50) +#define VEC_FPUNDER (51) +#define VEC_FPOE (52) +#define VEC_FPOVER (53) +#define VEC_FPNAN (54) +#define VEC_FPUNSUP (55) +#define VEC_UNIMPEA (60) +#define VEC_UNIMPII (61) +#define VEC_USER (64) + +#define VECOFF(vec) ((vec)<<2) + +#ifndef __ASSEMBLY__ + +/* Status register bits */ +#define PS_T (0x8000) +#define PS_S (0x2000) +#define PS_M (0x1000) +#define PS_C (0x0001) + +/* structure for stack frames */ + +struct frame { + struct pt_regs ptregs; + union { + struct { + unsigned long iaddr; /* instruction address */ + } fmt2; + struct { + unsigned long effaddr; /* effective address */ + } fmt3; + struct { + unsigned long effaddr; /* effective address */ + unsigned long pc; /* pc of faulted instr */ + } fmt4; + struct { + unsigned long effaddr; /* effective address */ + unsigned short ssw; /* special status word */ + unsigned short wb3s; /* write back 3 status */ + unsigned short wb2s; /* write back 2 status */ + unsigned short wb1s; /* write back 1 status */ + unsigned long faddr; /* fault address */ + unsigned long wb3a; /* write back 3 address */ + unsigned long wb3d; /* write back 3 data */ + unsigned long wb2a; /* write back 2 address */ + unsigned long wb2d; /* write back 2 data */ + unsigned long wb1a; /* write back 1 address */ + unsigned long wb1dpd0; /* write back 1 data/push data 0*/ + unsigned long pd1; /* push data 1*/ + unsigned long pd2; /* push data 2*/ + unsigned long pd3; /* push data 3*/ + } fmt7; + struct { + unsigned long iaddr; /* instruction address */ + unsigned short int1[4]; /* internal registers */ + } fmt9; + struct { + unsigned short int1; + unsigned short ssw; /* special status word */ + unsigned short isc; /* instruction stage c */ + unsigned short isb; /* instruction stage b */ + unsigned long daddr; /* data cycle fault address */ + unsigned short int2[2]; + unsigned long dobuf; /* data cycle output buffer */ + unsigned short int3[2]; + } fmta; + struct { + unsigned short int1; + unsigned short ssw; /* special status word */ + unsigned short isc; /* instruction stage c */ + unsigned short isb; /* instruction stage b */ + unsigned long daddr; /* data cycle fault address */ + unsigned short int2[2]; + unsigned long dobuf; /* data cycle output buffer */ + unsigned short int3[4]; + unsigned long baddr; /* stage B address */ + unsigned short int4[2]; + unsigned long dibuf; /* data cycle input buffer */ + unsigned short int5[3]; + unsigned ver : 4; /* stack frame version # */ + unsigned int6:12; + unsigned short int7[18]; + } fmtb; + } un; +}; + +#endif /* __ASSEMBLY__ */ + +#endif /* _M68KNOMMU_TRAPS_H */ diff --git a/arch/m68knommu/include/asm/types.h b/arch/m68knommu/include/asm/types.h new file mode 100644 index 000000000000..031238c2d180 --- /dev/null +++ b/arch/m68knommu/include/asm/types.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68knommu/include/asm/uaccess.h b/arch/m68knommu/include/asm/uaccess.h new file mode 100644 index 000000000000..68bbe9b312f1 --- /dev/null +++ b/arch/m68knommu/include/asm/uaccess.h @@ -0,0 +1,181 @@ +#ifndef __M68KNOMMU_UACCESS_H +#define __M68KNOMMU_UACCESS_H + +/* + * User space memory access functions + */ +#include +#include +#include + +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size)) + +/* + * It is not enough to just have access_ok check for a real RAM address. + * This would disallow the case of code/ro-data running XIP in flash/rom. + * Ideally we would check the possible flash ranges too, but that is + * currently not so easy. + */ +static inline int _access_ok(unsigned long addr, unsigned long size) +{ + return 1; +} + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); + + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + */ + +#define put_user(x, ptr) \ +({ \ + int __pu_err = 0; \ + typeof(*(ptr)) __pu_val = (x); \ + switch (sizeof (*(ptr))) { \ + case 1: \ + __put_user_asm(__pu_err, __pu_val, ptr, b); \ + break; \ + case 2: \ + __put_user_asm(__pu_err, __pu_val, ptr, w); \ + break; \ + case 4: \ + __put_user_asm(__pu_err, __pu_val, ptr, l); \ + break; \ + case 8: \ + memcpy(ptr, &__pu_val, sizeof (*(ptr))); \ + break; \ + default: \ + __pu_err = __put_user_bad(); \ + break; \ + } \ + __pu_err; \ +}) +#define __put_user(x, ptr) put_user(x, ptr) + +extern int __put_user_bad(void); + +/* + * Tell gcc we read from memory instead of writing: this is because + * we do not write to any memory gcc knows about, so there are no + * aliasing issues. + */ + +#define __ptr(x) ((unsigned long *)(x)) + +#define __put_user_asm(err,x,ptr,bwl) \ + __asm__ ("move" #bwl " %0,%1" \ + : /* no outputs */ \ + :"d" (x),"m" (*__ptr(ptr)) : "memory") + +#define get_user(x, ptr) \ +({ \ + int __gu_err = 0; \ + typeof(x) __gu_val = 0; \ + switch (sizeof(*(ptr))) { \ + case 1: \ + __get_user_asm(__gu_err, __gu_val, ptr, b, "=d"); \ + break; \ + case 2: \ + __get_user_asm(__gu_err, __gu_val, ptr, w, "=r"); \ + break; \ + case 4: \ + __get_user_asm(__gu_err, __gu_val, ptr, l, "=r"); \ + break; \ + case 8: \ + memcpy((void *) &__gu_val, ptr, sizeof (*(ptr))); \ + break; \ + default: \ + __gu_val = 0; \ + __gu_err = __get_user_bad(); \ + break; \ + } \ + (x) = (typeof(*(ptr))) __gu_val; \ + __gu_err; \ +}) +#define __get_user(x, ptr) get_user(x, ptr) + +extern int __get_user_bad(void); + +#define __get_user_asm(err,x,ptr,bwl,reg) \ + __asm__ ("move" #bwl " %1,%0" \ + : "=d" (x) \ + : "m" (*__ptr(ptr))) + +#define copy_from_user(to, from, n) (memcpy(to, from, n), 0) +#define copy_to_user(to, from, n) (memcpy(to, from, n), 0) + +#define __copy_from_user(to, from, n) copy_from_user(to, from, n) +#define __copy_to_user(to, from, n) copy_to_user(to, from, n) +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; }) + +#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; }) + +/* + * Copy a null terminated string from userspace. + */ + +static inline long +strncpy_from_user(char *dst, const char *src, long count) +{ + char *tmp; + strncpy(dst, src, count); + for (tmp = dst; *tmp && count > 0; tmp++, count--) + ; + return(tmp - dst); /* DAVIDM should we count a NUL ? check getname */ +} + +/* + * Return the size of a string (including the ending 0) + * + * Return 0 on exception, a value greater than N if too long + */ +static inline long strnlen_user(const char *src, long n) +{ + return(strlen(src) + 1); /* DAVIDM make safer */ +} + +#define strlen_user(str) strnlen_user(str, 32767) + +/* + * Zero Userspace + */ + +static inline unsigned long +__clear_user(void *to, unsigned long n) +{ + memset(to, 0, n); + return 0; +} + +#define clear_user(to,n) __clear_user(to,n) + +#endif /* _M68KNOMMU_UACCESS_H */ diff --git a/arch/m68knommu/include/asm/ucontext.h b/arch/m68knommu/include/asm/ucontext.h new file mode 100644 index 000000000000..713a27f901cd --- /dev/null +++ b/arch/m68knommu/include/asm/ucontext.h @@ -0,0 +1,32 @@ +#ifndef _M68KNOMMU_UCONTEXT_H +#define _M68KNOMMU_UCONTEXT_H + +typedef int greg_t; +#define NGREG 18 +typedef greg_t gregset_t[NGREG]; + +typedef struct fpregset { + int f_pcr; + int f_psr; + int f_fpiaddr; + int f_fpregs[8][3]; +} fpregset_t; + +struct mcontext { + int version; + gregset_t gregs; + fpregset_t fpregs; +}; + +#define MCONTEXT_VERSION 2 + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct mcontext uc_mcontext; + unsigned long uc_filler[80]; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif diff --git a/arch/m68knommu/include/asm/unaligned.h b/arch/m68knommu/include/asm/unaligned.h new file mode 100644 index 000000000000..eb1ea4cb9a59 --- /dev/null +++ b/arch/m68knommu/include/asm/unaligned.h @@ -0,0 +1,25 @@ +#ifndef _ASM_M68KNOMMU_UNALIGNED_H +#define _ASM_M68KNOMMU_UNALIGNED_H + + +#ifdef CONFIG_COLDFIRE +#include +#include +#include + +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#else +/* + * The m68k can do unaligned accesses itself. + */ +#include +#include + +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#endif + +#endif /* _ASM_M68KNOMMU_UNALIGNED_H */ diff --git a/arch/m68knommu/include/asm/unistd.h b/arch/m68knommu/include/asm/unistd.h new file mode 100644 index 000000000000..4ba98b9c5d79 --- /dev/null +++ b/arch/m68knommu/include/asm/unistd.h @@ -0,0 +1,366 @@ +#ifndef _ASM_M68K_UNISTD_H_ +#define _ASM_M68K_UNISTD_H_ + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_chown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl /* 110 */ not supported +#define __NR_vhangup 111 +#define __NR_idle /* 112 */ Obsolete +#define __NR_vm86 /* 113 */ not supported +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_cacheflush 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_getpagesize 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_lchown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_chown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_lchown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_getdents64 220 +#define __NR_gettid 221 +#define __NR_tkill 222 +#define __NR_setxattr 223 +#define __NR_lsetxattr 224 +#define __NR_fsetxattr 225 +#define __NR_getxattr 226 +#define __NR_lgetxattr 227 +#define __NR_fgetxattr 228 +#define __NR_listxattr 229 +#define __NR_llistxattr 230 +#define __NR_flistxattr 231 +#define __NR_removexattr 232 +#define __NR_lremovexattr 233 +#define __NR_fremovexattr 234 +#define __NR_futex 235 +#define __NR_sendfile64 236 +#define __NR_mincore 237 +#define __NR_madvise 238 +#define __NR_fcntl64 239 +#define __NR_readahead 240 +#define __NR_io_setup 241 +#define __NR_io_destroy 242 +#define __NR_io_getevents 243 +#define __NR_io_submit 244 +#define __NR_io_cancel 245 +#define __NR_fadvise64 246 +#define __NR_exit_group 247 +#define __NR_lookup_dcookie 248 +#define __NR_epoll_create 249 +#define __NR_epoll_ctl 250 +#define __NR_epoll_wait 251 +#define __NR_remap_file_pages 252 +#define __NR_set_tid_address 253 +#define __NR_timer_create 254 +#define __NR_timer_settime 255 +#define __NR_timer_gettime 256 +#define __NR_timer_getoverrun 257 +#define __NR_timer_delete 258 +#define __NR_clock_settime 259 +#define __NR_clock_gettime 260 +#define __NR_clock_getres 261 +#define __NR_clock_nanosleep 262 +#define __NR_statfs64 263 +#define __NR_fstatfs64 264 +#define __NR_tgkill 265 +#define __NR_utimes 266 +#define __NR_fadvise64_64 267 +#define __NR_mbind 268 +#define __NR_get_mempolicy 269 +#define __NR_set_mempolicy 270 +#define __NR_mq_open 271 +#define __NR_mq_unlink 272 +#define __NR_mq_timedsend 273 +#define __NR_mq_timedreceive 274 +#define __NR_mq_notify 275 +#define __NR_mq_getsetattr 276 +#define __NR_waitid 277 +#define __NR_vserver 278 +#define __NR_add_key 279 +#define __NR_request_key 280 +#define __NR_keyctl 281 +#define __NR_ioprio_set 282 +#define __NR_ioprio_get 283 +#define __NR_inotify_init 284 +#define __NR_inotify_add_watch 285 +#define __NR_inotify_rm_watch 286 +#define __NR_migrate_pages 287 +#define __NR_openat 288 +#define __NR_mkdirat 289 +#define __NR_mknodat 290 +#define __NR_fchownat 291 +#define __NR_futimesat 292 +#define __NR_fstatat64 293 +#define __NR_unlinkat 294 +#define __NR_renameat 295 +#define __NR_linkat 296 +#define __NR_symlinkat 297 +#define __NR_readlinkat 298 +#define __NR_fchmodat 299 +#define __NR_faccessat 300 +#define __NR_pselect6 301 +#define __NR_ppoll 302 +#define __NR_unshare 303 +#define __NR_set_robust_list 304 +#define __NR_get_robust_list 305 +#define __NR_splice 306 +#define __NR_sync_file_range 307 +#define __NR_tee 308 +#define __NR_vmsplice 309 +#define __NR_move_pages 310 +#define __NR_sched_setaffinity 311 +#define __NR_sched_getaffinity 312 +#define __NR_kexec_load 313 +#define __NR_getcpu 314 +#define __NR_epoll_pwait 315 +#define __NR_utimensat 316 +#define __NR_signalfd 317 +#define __NR_timerfd_create 318 +#define __NR_eventfd 319 +#define __NR_fallocate 320 +#define __NR_timerfd_settime 321 +#define __NR_timerfd_gettime 322 + +#ifdef __KERNEL__ + +#define NR_syscalls 323 + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") + +#endif /* __KERNEL__ */ +#endif /* _ASM_M68K_UNISTD_H_ */ diff --git a/arch/m68knommu/include/asm/user.h b/arch/m68knommu/include/asm/user.h new file mode 100644 index 000000000000..a5a555b761c4 --- /dev/null +++ b/arch/m68knommu/include/asm/user.h @@ -0,0 +1 @@ +#include diff --git a/include/asm-m68knommu/Kbuild b/include/asm-m68knommu/Kbuild deleted file mode 100644 index c68e1680da01..000000000000 --- a/include/asm-m68knommu/Kbuild +++ /dev/null @@ -1 +0,0 @@ -include include/asm-generic/Kbuild.asm diff --git a/include/asm-m68knommu/MC68328.h b/include/asm-m68knommu/MC68328.h deleted file mode 100644 index a337e56d09bf..000000000000 --- a/include/asm-m68knommu/MC68328.h +++ /dev/null @@ -1,1266 +0,0 @@ - -/* include/asm-m68knommu/MC68328.h: '328 control registers - * - * Copyright (C) 1999 Vladimir Gurevich - * Bear & Hare Software, Inc. - * - * Based on include/asm-m68knommu/MC68332.h - * Copyright (C) 1998 Kenneth Albanowski , - * - */ - -#ifndef _MC68328_H_ -#define _MC68328_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) -#define LONG_REF(addr) (*((volatile unsigned long*)addr)) - -#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) -#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) - -/********** - * - * 0xFFFFF0xx -- System Control - * - **********/ - -/* - * System Control Register (SCR) - */ -#define SCR_ADDR 0xfffff000 -#define SCR BYTE_REF(SCR_ADDR) - -#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ -#define SCR_DMAP 0x04 /* Double Map */ -#define SCR_SO 0x08 /* Supervisor Only */ -#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ -#define SCR_PRV 0x20 /* Privilege Violation */ -#define SCR_WPV 0x40 /* Write Protect Violation */ -#define SCR_BETO 0x80 /* Bus-Error TimeOut */ - -/* - * Mask Revision Register - */ -#define MRR_ADDR 0xfffff004 -#define MRR LONG_REF(MRR_ADDR) - -/********** - * - * 0xFFFFF1xx -- Chip-Select logic - * - **********/ - -/********** - * - * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control - * - **********/ - -/* - * Group Base Address Registers - */ -#define GRPBASEA_ADDR 0xfffff100 -#define GRPBASEB_ADDR 0xfffff102 -#define GRPBASEC_ADDR 0xfffff104 -#define GRPBASED_ADDR 0xfffff106 - -#define GRPBASEA WORD_REF(GRPBASEA_ADDR) -#define GRPBASEB WORD_REF(GRPBASEB_ADDR) -#define GRPBASEC WORD_REF(GRPBASEC_ADDR) -#define GRPBASED WORD_REF(GRPBASED_ADDR) - -#define GRPBASE_V 0x0001 /* Valid */ -#define GRPBASE_GBA_MASK 0xfff0 /* Group Base Address (bits 31-20) */ - -/* - * Group Base Address Mask Registers - */ -#define GRPMASKA_ADDR 0xfffff108 -#define GRPMASKB_ADDR 0xfffff10a -#define GRPMASKC_ADDR 0xfffff10c -#define GRPMASKD_ADDR 0xfffff10e - -#define GRPMASKA WORD_REF(GRPMASKA_ADDR) -#define GRPMASKB WORD_REF(GRPMASKB_ADDR) -#define GRPMASKC WORD_REF(GRPMASKC_ADDR) -#define GRPMASKD WORD_REF(GRPMASKD_ADDR) - -#define GRMMASK_GMA_MASK 0xfffff0 /* Group Base Mask (bits 31-20) */ - -/* - * Chip-Select Option Registers (group A) - */ -#define CSA0_ADDR 0xfffff110 -#define CSA1_ADDR 0xfffff114 -#define CSA2_ADDR 0xfffff118 -#define CSA3_ADDR 0xfffff11c - -#define CSA0 LONG_REF(CSA0_ADDR) -#define CSA1 LONG_REF(CSA1_ADDR) -#define CSA2 LONG_REF(CSA2_ADDR) -#define CSA3 LONG_REF(CSA3_ADDR) - -#define CSA_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSA_WAIT_SHIFT 0 -#define CSA_RO 0x00000008 /* Read-Only */ -#define CSA_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ -#define CSA_AM_SHIFT 8 -#define CSA_BUSW 0x00010000 /* Bus Width Select */ -#define CSA_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ -#define CSA_AC_SHIFT 24 - -/* - * Chip-Select Option Registers (group B) - */ -#define CSB0_ADDR 0xfffff120 -#define CSB1_ADDR 0xfffff124 -#define CSB2_ADDR 0xfffff128 -#define CSB3_ADDR 0xfffff12c - -#define CSB0 LONG_REF(CSB0_ADDR) -#define CSB1 LONG_REF(CSB1_ADDR) -#define CSB2 LONG_REF(CSB2_ADDR) -#define CSB3 LONG_REF(CSB3_ADDR) - -#define CSB_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSB_WAIT_SHIFT 0 -#define CSB_RO 0x00000008 /* Read-Only */ -#define CSB_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ -#define CSB_AM_SHIFT 8 -#define CSB_BUSW 0x00010000 /* Bus Width Select */ -#define CSB_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ -#define CSB_AC_SHIFT 24 - -/* - * Chip-Select Option Registers (group C) - */ -#define CSC0_ADDR 0xfffff130 -#define CSC1_ADDR 0xfffff134 -#define CSC2_ADDR 0xfffff138 -#define CSC3_ADDR 0xfffff13c - -#define CSC0 LONG_REF(CSC0_ADDR) -#define CSC1 LONG_REF(CSC1_ADDR) -#define CSC2 LONG_REF(CSC2_ADDR) -#define CSC3 LONG_REF(CSC3_ADDR) - -#define CSC_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSC_WAIT_SHIFT 0 -#define CSC_RO 0x00000008 /* Read-Only */ -#define CSC_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ -#define CSC_AM_SHIFT 4 -#define CSC_BUSW 0x00010000 /* Bus Width Select */ -#define CSC_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ -#define CSC_AC_SHIFT 20 - -/* - * Chip-Select Option Registers (group D) - */ -#define CSD0_ADDR 0xfffff140 -#define CSD1_ADDR 0xfffff144 -#define CSD2_ADDR 0xfffff148 -#define CSD3_ADDR 0xfffff14c - -#define CSD0 LONG_REF(CSD0_ADDR) -#define CSD1 LONG_REF(CSD1_ADDR) -#define CSD2 LONG_REF(CSD2_ADDR) -#define CSD3 LONG_REF(CSD3_ADDR) - -#define CSD_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSD_WAIT_SHIFT 0 -#define CSD_RO 0x00000008 /* Read-Only */ -#define CSD_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ -#define CSD_AM_SHIFT 4 -#define CSD_BUSW 0x00010000 /* Bus Width Select */ -#define CSD_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ -#define CSD_AC_SHIFT 20 - -/********** - * - * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control - * - **********/ - -/* - * PLL Control Register - */ -#define PLLCR_ADDR 0xfffff200 -#define PLLCR WORD_REF(PLLCR_ADDR) - -#define PLLCR_DISPLL 0x0008 /* Disable PLL */ -#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ -#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ -#define PLLCR_SYSCLK_SEL_SHIFT 8 -#define PLLCR_PIXCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ -#define PLLCR_PIXCLK_SEL_SHIFT 11 - -/* 'EZ328-compatible definitions */ -#define PLLCR_LCDCLK_SEL_MASK PLLCR_PIXCLK_SEL_MASK -#define PLLCR_LCDCLK_SEL_SHIFT PLLCR_PIXCLK_SEL_SHIFT - -/* - * PLL Frequency Select Register - */ -#define PLLFSR_ADDR 0xfffff202 -#define PLLFSR WORD_REF(PLLFSR_ADDR) - -#define PLLFSR_PC_MASK 0x00ff /* P Count */ -#define PLLFSR_PC_SHIFT 0 -#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ -#define PLLFSR_QC_SHIFT 8 -#define PLLFSR_PROT 0x4000 /* Protect P & Q */ -#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ - -/* - * Power Control Register - */ -#define PCTRL_ADDR 0xfffff207 -#define PCTRL BYTE_REF(PCTRL_ADDR) - -#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ -#define PCTRL_WIDTH_SHIFT 0 -#define PCTRL_STOP 0x40 /* Enter power-save mode immediately */ -#define PCTRL_PCEN 0x80 /* Power Control Enable */ - -/********** - * - * 0xFFFFF3xx -- Interrupt Controller - * - **********/ - -/* - * Interrupt Vector Register - */ -#define IVR_ADDR 0xfffff300 -#define IVR BYTE_REF(IVR_ADDR) - -#define IVR_VECTOR_MASK 0xF8 - -/* - * Interrupt control Register - */ -#define ICR_ADRR 0xfffff302 -#define ICR WORD_REF(ICR_ADDR) - -#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ -#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ -#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ -#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ -#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ -#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ -#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ -#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ - -/* - * Interrupt Mask Register - */ -#define IMR_ADDR 0xfffff304 -#define IMR LONG_REF(IMR_ADDR) - -/* - * Define the names for bit positions first. This is useful for - * request_irq - */ -#define SPIM_IRQ_NUM 0 /* SPI Master interrupt */ -#define TMR2_IRQ_NUM 1 /* Timer 2 interrupt */ -#define UART_IRQ_NUM 2 /* UART interrupt */ -#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ -#define RTC_IRQ_NUM 4 /* RTC interrupt */ -#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ -#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */ -#define INT0_IRQ_NUM 8 /* External INT0 */ -#define INT1_IRQ_NUM 9 /* External INT1 */ -#define INT2_IRQ_NUM 10 /* External INT2 */ -#define INT3_IRQ_NUM 11 /* External INT3 */ -#define INT4_IRQ_NUM 12 /* External INT4 */ -#define INT5_IRQ_NUM 13 /* External INT5 */ -#define INT6_IRQ_NUM 14 /* External INT6 */ -#define INT7_IRQ_NUM 15 /* External INT7 */ -#define IRQ1_IRQ_NUM 16 /* IRQ1 */ -#define IRQ2_IRQ_NUM 17 /* IRQ2 */ -#define IRQ3_IRQ_NUM 18 /* IRQ3 */ -#define IRQ6_IRQ_NUM 19 /* IRQ6 */ -#define PEN_IRQ_NUM 20 /* Pen Interrupt */ -#define SPIS_IRQ_NUM 21 /* SPI Slave Interrupt */ -#define TMR1_IRQ_NUM 22 /* Timer 1 interrupt */ -#define IRQ7_IRQ_NUM 23 /* IRQ7 */ - -/* '328-compatible definitions */ -#define SPI_IRQ_NUM SPIM_IRQ_NUM -#define TMR_IRQ_NUM TMR1_IRQ_NUM - -/* - * Here go the bitmasks themselves - */ -#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */ -#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */ -#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ -#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ -#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ -#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ -#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ -#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ -#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ -#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ -#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ -#define IMR_MINT4 (1 << INT4_IRQ_NUM) /* Mask External INT4 */ -#define IMR_MINT5 (1 << INT5_IRQ_NUM) /* Mask External INT5 */ -#define IMR_MINT6 (1 << INT6_IRQ_NUM) /* Mask External INT6 */ -#define IMR_MINT7 (1 << INT7_IRQ_NUM) /* Mask External INT7 */ -#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ -#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ -#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ -#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ -#define IMR_MPEN (1 << PEN_IRQ_NUM) /* Mask Pen Interrupt */ -#define IMR_MSPIS (1 << SPIS_IRQ_NUM) /* Mask SPI Slave Interrupt */ -#define IMR_MTMR1 (1 << TMR1_IRQ_NUM) /* Mask Timer 1 interrupt */ -#define IMR_MIRQ7 (1 << IRQ7_IRQ_NUM) /* Mask IRQ7 */ - -/* 'EZ328-compatible definitions */ -#define IMR_MSPI IMR_MSPIM -#define IMR_MTMR IMR_MTMR1 - -/* - * Interrupt Wake-Up Enable Register - */ -#define IWR_ADDR 0xfffff308 -#define IWR LONG_REF(IWR_ADDR) - -#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ -#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ -#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define IWR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define IWR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define IWR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ -#define IWR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define IWR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define IWR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define IWR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define IWR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ -#define IWR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ -#define IWR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ -#define IWR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ -#define IWR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define IWR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define IWR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define IWR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define IWR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ -#define IWR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ -#define IWR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ -#define IWR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ - -/* - * Interrupt Status Register - */ -#define ISR_ADDR 0xfffff30c -#define ISR LONG_REF(ISR_ADDR) - -#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ -#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ -#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ -#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define ISR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ -#define ISR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ -#define ISR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ -#define ISR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ -#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define ISR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ -#define ISR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ -#define ISR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ -#define ISR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ - -/* 'EZ328-compatible definitions */ -#define ISR_SPI ISR_SPIM -#define ISR_TMR ISR_TMR1 - -/* - * Interrupt Pending Register - */ -#define IPR_ADDR 0xfffff310 -#define IPR LONG_REF(IPR_ADDR) - -#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ -#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ -#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ -#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define IPR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ -#define IPR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ -#define IPR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ -#define IPR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ -#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define IPR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ -#define IPR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ -#define IPR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ -#define IPR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ - -/* 'EZ328-compatible definitions */ -#define IPR_SPI IPR_SPIM -#define IPR_TMR IPR_TMR1 - -/********** - * - * 0xFFFFF4xx -- Parallel Ports - * - **********/ - -/* - * Port A - */ -#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ -#define PADATA_ADDR 0xfffff401 /* Port A data register */ -#define PASEL_ADDR 0xfffff403 /* Port A Select register */ - -#define PADIR BYTE_REF(PADIR_ADDR) -#define PADATA BYTE_REF(PADATA_ADDR) -#define PASEL BYTE_REF(PASEL_ADDR) - -#define PA(x) (1 << (x)) -#define PA_A(x) PA((x) - 16) /* This is specific to PA only! */ - -#define PA_A16 PA(0) /* Use A16 as PA(0) */ -#define PA_A17 PA(1) /* Use A17 as PA(1) */ -#define PA_A18 PA(2) /* Use A18 as PA(2) */ -#define PA_A19 PA(3) /* Use A19 as PA(3) */ -#define PA_A20 PA(4) /* Use A20 as PA(4) */ -#define PA_A21 PA(5) /* Use A21 as PA(5) */ -#define PA_A22 PA(6) /* Use A22 as PA(6) */ -#define PA_A23 PA(7) /* Use A23 as PA(7) */ - -/* - * Port B - */ -#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ -#define PBDATA_ADDR 0xfffff409 /* Port B data register */ -#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ - -#define PBDIR BYTE_REF(PBDIR_ADDR) -#define PBDATA BYTE_REF(PBDATA_ADDR) -#define PBSEL BYTE_REF(PBSEL_ADDR) - -#define PB(x) (1 << (x)) -#define PB_D(x) PB(x) /* This is specific to port B only */ - -#define PB_D0 PB(0) /* Use D0 as PB(0) */ -#define PB_D1 PB(1) /* Use D1 as PB(1) */ -#define PB_D2 PB(2) /* Use D2 as PB(2) */ -#define PB_D3 PB(3) /* Use D3 as PB(3) */ -#define PB_D4 PB(4) /* Use D4 as PB(4) */ -#define PB_D5 PB(5) /* Use D5 as PB(5) */ -#define PB_D6 PB(6) /* Use D6 as PB(6) */ -#define PB_D7 PB(7) /* Use D7 as PB(7) */ - -/* - * Port C - */ -#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ -#define PCDATA_ADDR 0xfffff411 /* Port C data register */ -#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ - -#define PCDIR BYTE_REF(PCDIR_ADDR) -#define PCDATA BYTE_REF(PCDATA_ADDR) -#define PCSEL BYTE_REF(PCSEL_ADDR) - -#define PC(x) (1 << (x)) - -#define PC_WE PC(6) /* Use WE as PC(6) */ -#define PC_DTACK PC(5) /* Use DTACK as PC(5) */ -#define PC_IRQ7 PC(4) /* Use IRQ7 as PC(4) */ -#define PC_LDS PC(2) /* Use LDS as PC(2) */ -#define PC_UDS PC(1) /* Use UDS as PC(1) */ -#define PC_MOCLK PC(0) /* Use MOCLK as PC(0) */ - -/* - * Port D - */ -#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ -#define PDDATA_ADDR 0xfffff419 /* Port D data register */ -#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ -#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ -#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ -#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ - -#define PDDIR BYTE_REF(PDDIR_ADDR) -#define PDDATA BYTE_REF(PDDATA_ADDR) -#define PDPUEN BYTE_REF(PDPUEN_ADDR) -#define PDPOL BYTE_REF(PDPOL_ADDR) -#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) -#define PDIQEG BYTE_REF(PDIQEG_ADDR) - -#define PD(x) (1 << (x)) -#define PD_KB(x) PD(x) /* This is specific for Port D only */ - -#define PD_KB0 PD(0) /* Use KB0 as PD(0) */ -#define PD_KB1 PD(1) /* Use KB1 as PD(1) */ -#define PD_KB2 PD(2) /* Use KB2 as PD(2) */ -#define PD_KB3 PD(3) /* Use KB3 as PD(3) */ -#define PD_KB4 PD(4) /* Use KB4 as PD(4) */ -#define PD_KB5 PD(5) /* Use KB5 as PD(5) */ -#define PD_KB6 PD(6) /* Use KB6 as PD(6) */ -#define PD_KB7 PD(7) /* Use KB7 as PD(7) */ - -/* - * Port E - */ -#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ -#define PEDATA_ADDR 0xfffff421 /* Port E data register */ -#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ -#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ - -#define PEDIR BYTE_REF(PEDIR_ADDR) -#define PEDATA BYTE_REF(PEDATA_ADDR) -#define PEPUEN BYTE_REF(PEPUEN_ADDR) -#define PESEL BYTE_REF(PESEL_ADDR) - -#define PE(x) (1 << (x)) - -#define PE_CSA1 PE(1) /* Use CSA1 as PE(1) */ -#define PE_CSA2 PE(2) /* Use CSA2 as PE(2) */ -#define PE_CSA3 PE(3) /* Use CSA3 as PE(3) */ -#define PE_CSB0 PE(4) /* Use CSB0 as PE(4) */ -#define PE_CSB1 PE(5) /* Use CSB1 as PE(5) */ -#define PE_CSB2 PE(6) /* Use CSB2 as PE(6) */ -#define PE_CSB3 PE(7) /* Use CSB3 as PE(7) */ - -/* - * Port F - */ -#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ -#define PFDATA_ADDR 0xfffff429 /* Port F data register */ -#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ -#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ - -#define PFDIR BYTE_REF(PFDIR_ADDR) -#define PFDATA BYTE_REF(PFDATA_ADDR) -#define PFPUEN BYTE_REF(PFPUEN_ADDR) -#define PFSEL BYTE_REF(PFSEL_ADDR) - -#define PF(x) (1 << (x)) -#define PF_A(x) PF((x) - 24) /* This is Port F specific only */ - -#define PF_A24 PF(0) /* Use A24 as PF(0) */ -#define PF_A25 PF(1) /* Use A25 as PF(1) */ -#define PF_A26 PF(2) /* Use A26 as PF(2) */ -#define PF_A27 PF(3) /* Use A27 as PF(3) */ -#define PF_A28 PF(4) /* Use A28 as PF(4) */ -#define PF_A29 PF(5) /* Use A29 as PF(5) */ -#define PF_A30 PF(6) /* Use A30 as PF(6) */ -#define PF_A31 PF(7) /* Use A31 as PF(7) */ - -/* - * Port G - */ -#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ -#define PGDATA_ADDR 0xfffff431 /* Port G data register */ -#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ -#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ - -#define PGDIR BYTE_REF(PGDIR_ADDR) -#define PGDATA BYTE_REF(PGDATA_ADDR) -#define PGPUEN BYTE_REF(PGPUEN_ADDR) -#define PGSEL BYTE_REF(PGSEL_ADDR) - -#define PG(x) (1 << (x)) - -#define PG_UART_TXD PG(0) /* Use UART_TXD as PG(0) */ -#define PG_UART_RXD PG(1) /* Use UART_RXD as PG(1) */ -#define PG_PWMOUT PG(2) /* Use PWMOUT as PG(2) */ -#define PG_TOUT2 PG(3) /* Use TOUT2 as PG(3) */ -#define PG_TIN2 PG(4) /* Use TIN2 as PG(4) */ -#define PG_TOUT1 PG(5) /* Use TOUT1 as PG(5) */ -#define PG_TIN1 PG(6) /* Use TIN1 as PG(6) */ -#define PG_RTCOUT PG(7) /* Use RTCOUT as PG(7) */ - -/* - * Port J - */ -#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ -#define PJDATA_ADDR 0xfffff439 /* Port J data register */ -#define PJSEL_ADDR 0xfffff43b /* Port J Select Register */ - -#define PJDIR BYTE_REF(PJDIR_ADDR) -#define PJDATA BYTE_REF(PJDATA_ADDR) -#define PJSEL BYTE_REF(PJSEL_ADDR) - -#define PJ(x) (1 << (x)) - -#define PJ_CSD3 PJ(7) /* Use CSD3 as PJ(7) */ - -/* - * Port K - */ -#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */ -#define PKDATA_ADDR 0xfffff441 /* Port K data register */ -#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enable reg */ -#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */ - -#define PKDIR BYTE_REF(PKDIR_ADDR) -#define PKDATA BYTE_REF(PKDATA_ADDR) -#define PKPUEN BYTE_REF(PKPUEN_ADDR) -#define PKSEL BYTE_REF(PKSEL_ADDR) - -#define PK(x) (1 << (x)) - -/* - * Port M - */ -#define PMDIR_ADDR 0xfffff438 /* Port M direction reg */ -#define PMDATA_ADDR 0xfffff439 /* Port M data register */ -#define PMPUEN_ADDR 0xfffff43a /* Port M Pull-Up enable reg */ -#define PMSEL_ADDR 0xfffff43b /* Port M Select Register */ - -#define PMDIR BYTE_REF(PMDIR_ADDR) -#define PMDATA BYTE_REF(PMDATA_ADDR) -#define PMPUEN BYTE_REF(PMPUEN_ADDR) -#define PMSEL BYTE_REF(PMSEL_ADDR) - -#define PM(x) (1 << (x)) - -/********** - * - * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) - * - **********/ - -/* - * PWM Control Register - */ -#define PWMC_ADDR 0xfffff500 -#define PWMC WORD_REF(PWMC_ADDR) - -#define PWMC_CLKSEL_MASK 0x0007 /* Clock Selection */ -#define PWMC_CLKSEL_SHIFT 0 -#define PWMC_PWMEN 0x0010 /* Enable PWM */ -#define PMNC_POL 0x0020 /* PWM Output Bit Polarity */ -#define PWMC_PIN 0x0080 /* Current PWM output pin status */ -#define PWMC_LOAD 0x0100 /* Force a new period */ -#define PWMC_IRQEN 0x4000 /* Interrupt Request Enable */ -#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ - -/* 'EZ328-compatible definitions */ -#define PWMC_EN PWMC_PWMEN - -/* - * PWM Period Register - */ -#define PWMP_ADDR 0xfffff502 -#define PWMP WORD_REF(PWMP_ADDR) - -/* - * PWM Width Register - */ -#define PWMW_ADDR 0xfffff504 -#define PWMW WORD_REF(PWMW_ADDR) - -/* - * PWM Counter Register - */ -#define PWMCNT_ADDR 0xfffff506 -#define PWMCNT WORD_REF(PWMCNT_ADDR) - -/********** - * - * 0xFFFFF6xx -- General-Purpose Timers - * - **********/ - -/* - * Timer Unit 1 and 2 Control Registers - */ -#define TCTL1_ADDR 0xfffff600 -#define TCTL1 WORD_REF(TCTL1_ADDR) -#define TCTL2_ADDR 0xfffff60c -#define TCTL2 WORD_REF(TCTL2_ADDR) - -#define TCTL_TEN 0x0001 /* Timer Enable */ -#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ -#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ -#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ -#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ -#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ -#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ -#define TCTL_IRQEN 0x0010 /* IRQ Enable */ -#define TCTL_OM 0x0020 /* Output Mode */ -#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ -#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ -#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ -#define TCTL_FRR 0x0010 /* Free-Run Mode */ - -/* 'EZ328-compatible definitions */ -#define TCTL_ADDR TCTL1_ADDR -#define TCTL TCTL1 - -/* - * Timer Unit 1 and 2 Prescaler Registers - */ -#define TPRER1_ADDR 0xfffff602 -#define TPRER1 WORD_REF(TPRER1_ADDR) -#define TPRER2_ADDR 0xfffff60e -#define TPRER2 WORD_REF(TPRER2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TPRER_ADDR TPRER1_ADDR -#define TPRER TPRER1 - -/* - * Timer Unit 1 and 2 Compare Registers - */ -#define TCMP1_ADDR 0xfffff604 -#define TCMP1 WORD_REF(TCMP1_ADDR) -#define TCMP2_ADDR 0xfffff610 -#define TCMP2 WORD_REF(TCMP2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TCMP_ADDR TCMP1_ADDR -#define TCMP TCMP1 - -/* - * Timer Unit 1 and 2 Capture Registers - */ -#define TCR1_ADDR 0xfffff606 -#define TCR1 WORD_REF(TCR1_ADDR) -#define TCR2_ADDR 0xfffff612 -#define TCR2 WORD_REF(TCR2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TCR_ADDR TCR1_ADDR -#define TCR TCR1 - -/* - * Timer Unit 1 and 2 Counter Registers - */ -#define TCN1_ADDR 0xfffff608 -#define TCN1 WORD_REF(TCN1_ADDR) -#define TCN2_ADDR 0xfffff614 -#define TCN2 WORD_REF(TCN2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TCN_ADDR TCN1_ADDR -#define TCN TCN - -/* - * Timer Unit 1 and 2 Status Registers - */ -#define TSTAT1_ADDR 0xfffff60a -#define TSTAT1 WORD_REF(TSTAT1_ADDR) -#define TSTAT2_ADDR 0xfffff616 -#define TSTAT2 WORD_REF(TSTAT2_ADDR) - -#define TSTAT_COMP 0x0001 /* Compare Event occurred */ -#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ - -/* 'EZ328-compatible definitions */ -#define TSTAT_ADDR TSTAT1_ADDR -#define TSTAT TSTAT1 - -/* - * Watchdog Compare Register - */ -#define WRR_ADDR 0xfffff61a -#define WRR WORD_REF(WRR_ADDR) - -/* - * Watchdog Counter Register - */ -#define WCN_ADDR 0xfffff61c -#define WCN WORD_REF(WCN_ADDR) - -/* - * Watchdog Control and Status Register - */ -#define WCSR_ADDR 0xfffff618 -#define WCSR WORD_REF(WCSR_ADDR) - -#define WCSR_WDEN 0x0001 /* Watchdog Enable */ -#define WCSR_FI 0x0002 /* Forced Interrupt (instead of SW reset)*/ -#define WCSR_WRST 0x0004 /* Watchdog Reset */ - -/********** - * - * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS) - * - **********/ - -/* - * SPI Slave Register - */ -#define SPISR_ADDR 0xfffff700 -#define SPISR WORD_REF(SPISR_ADDR) - -#define SPISR_DATA_ADDR 0xfffff701 -#define SPISR_DATA BYTE_REF(SPISR_DATA_ADDR) - -#define SPISR_DATA_MASK 0x00ff /* Shifted data from the external device */ -#define SPISR_DATA_SHIFT 0 -#define SPISR_SPISEN 0x0100 /* SPIS module enable */ -#define SPISR_POL 0x0200 /* SPSCLK polarity control */ -#define SPISR_PHA 0x0400 /* Phase relationship between SPSCLK & SPSRxD */ -#define SPISR_OVWR 0x0800 /* Data buffer has been overwritten */ -#define SPISR_DATARDY 0x1000 /* Data ready */ -#define SPISR_ENPOL 0x2000 /* Enable Polarity */ -#define SPISR_IRQEN 0x4000 /* SPIS IRQ Enable */ -#define SPISR_SPISIRQ 0x8000 /* SPIS IRQ posted */ - -/********** - * - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) - * - **********/ - -/* - * SPIM Data Register - */ -#define SPIMDATA_ADDR 0xfffff800 -#define SPIMDATA WORD_REF(SPIMDATA_ADDR) - -/* - * SPIM Control/Status Register - */ -#define SPIMCONT_ADDR 0xfffff802 -#define SPIMCONT WORD_REF(SPIMCONT_ADDR) - -#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ -#define SPIMCONT_BIT_COUNT_SHIFT 0 -#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ -#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ -#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ -#define SPIMCONT_SPIMIRQ 0x0080 /* Interrupt Request */ -#define SPIMCONT_XCH 0x0100 /* Exchange */ -#define SPIMCONT_RSPIMEN 0x0200 /* Enable SPIM */ -#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ -#define SPIMCONT_DATA_RATE_SHIFT 13 - -/* 'EZ328-compatible definitions */ -#define SPIMCONT_IRQ SPIMCONT_SPIMIRQ -#define SPIMCONT_ENABLE SPIMCONT_SPIMEN -/********** - * - * 0xFFFFF9xx -- UART - * - **********/ - -/* - * UART Status/Control Register - */ -#define USTCNT_ADDR 0xfffff900 -#define USTCNT WORD_REF(USTCNT_ADDR) - -#define USTCNT_TXAVAILEN 0x0001 /* Transmitter Available Int Enable */ -#define USTCNT_TXHALFEN 0x0002 /* Transmitter Half Empty Int Enable */ -#define USTCNT_TXEMPTYEN 0x0004 /* Transmitter Empty Int Enable */ -#define USTCNT_RXREADYEN 0x0008 /* Receiver Ready Interrupt Enable */ -#define USTCNT_RXHALFEN 0x0010 /* Receiver Half-Full Int Enable */ -#define USTCNT_RXFULLEN 0x0020 /* Receiver Full Interrupt Enable */ -#define USTCNT_CTSDELTAEN 0x0040 /* CTS Delta Interrupt Enable */ -#define USTCNT_GPIODELTAEN 0x0080 /* Old Data Interrupt Enable */ -#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ -#define USTCNT_STOP 0x0200 /* Stop bit transmission */ -#define USTCNT_ODD_EVEN 0x0400 /* Odd Parity */ -#define USTCNT_PARITYEN 0x0800 /* Parity Enable */ -#define USTCNT_CLKMODE 0x1000 /* Clock Mode Select */ -#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ -#define USTCNT_RXEN 0x4000 /* Receiver Enable */ -#define USTCNT_UARTEN 0x8000 /* UART Enable */ - -/* 'EZ328-compatible definitions */ -#define USTCNT_TXAE USTCNT_TXAVAILEN -#define USTCNT_TXHE USTCNT_TXHALFEN -#define USTCNT_TXEE USTCNT_TXEMPTYEN -#define USTCNT_RXRE USTCNT_RXREADYEN -#define USTCNT_RXHE USTCNT_RXHALFEN -#define USTCNT_RXFE USTCNT_RXFULLEN -#define USTCNT_CTSD USTCNT_CTSDELTAEN -#define USTCNT_ODD USTCNT_ODD_EVEN -#define USTCNT_PEN USTCNT_PARITYEN -#define USTCNT_CLKM USTCNT_CLKMODE -#define USTCNT_UEN USTCNT_UARTEN - -/* - * UART Baud Control Register - */ -#define UBAUD_ADDR 0xfffff902 -#define UBAUD WORD_REF(UBAUD_ADDR) - -#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ -#define UBAUD_PRESCALER_SHIFT 0 -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ -#define UBAUD_DIVIDE_SHIFT 8 -#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ -#define UBAUD_GPIOSRC 0x1000 /* GPIO source */ -#define UBAUD_GPIODIR 0x2000 /* GPIO Direction */ -#define UBAUD_GPIO 0x4000 /* Current GPIO pin status */ -#define UBAUD_GPIODELTA 0x8000 /* GPIO pin value changed */ - -/* - * UART Receiver Register - */ -#define URX_ADDR 0xfffff904 -#define URX WORD_REF(URX_ADDR) - -#define URX_RXDATA_ADDR 0xfffff905 -#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) - -#define URX_RXDATA_MASK 0x00ff /* Received data */ -#define URX_RXDATA_SHIFT 0 -#define URX_PARITY_ERROR 0x0100 /* Parity Error */ -#define URX_BREAK 0x0200 /* Break Detected */ -#define URX_FRAME_ERROR 0x0400 /* Framing Error */ -#define URX_OVRUN 0x0800 /* Serial Overrun */ -#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ -#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ -#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ - -/* - * UART Transmitter Register - */ -#define UTX_ADDR 0xfffff906 -#define UTX WORD_REF(UTX_ADDR) - -#define UTX_TXDATA_ADDR 0xfffff907 -#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) - -#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ -#define UTX_TXDATA_SHIFT 0 -#define UTX_CTS_DELTA 0x0100 /* CTS changed */ -#define UTX_CTS_STATUS 0x0200 /* CTS State */ -#define UTX_IGNORE_CTS 0x0800 /* Ignore CTS */ -#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ -#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ -#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ -#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ - -/* 'EZ328-compatible definitions */ -#define UTX_CTS_STAT UTX_CTS_STATUS -#define UTX_NOCTS UTX_IGNORE_CTS - -/* - * UART Miscellaneous Register - */ -#define UMISC_ADDR 0xfffff908 -#define UMISC WORD_REF(UMISC_ADDR) - -#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ -#define UMISC_RX_POL 0x0008 /* Receive Polarity */ -#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ -#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ -#define UMISC_RTS 0x0040 /* Set RTS status */ -#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ -#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ -#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ -#define UMISC_CLKSRC 0x4000 /* Clock Source */ - - -/* generalization of uart control registers to support multiple ports: */ -typedef volatile struct { - volatile unsigned short int ustcnt; - volatile unsigned short int ubaud; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char rxdata; - } b; - } urx; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char txdata; - } b; - } utx; - volatile unsigned short int umisc; - volatile unsigned short int pad1; - volatile unsigned short int pad2; - volatile unsigned short int pad3; -} __attribute__((packed)) m68328_uart; - - -/********** - * - * 0xFFFFFAxx -- LCD Controller - * - **********/ - -/* - * LCD Screen Starting Address Register - */ -#define LSSA_ADDR 0xfffffa00 -#define LSSA LONG_REF(LSSA_ADDR) - -#define LSSA_SSA_MASK 0xfffffffe /* Bit 0 is reserved */ - -/* - * LCD Virtual Page Width Register - */ -#define LVPW_ADDR 0xfffffa05 -#define LVPW BYTE_REF(LVPW_ADDR) - -/* - * LCD Screen Width Register (not compatible with 'EZ328 !!!) - */ -#define LXMAX_ADDR 0xfffffa08 -#define LXMAX WORD_REF(LXMAX_ADDR) - -#define LXMAX_XM_MASK 0x02ff /* Bits 0-3 are reserved */ - -/* - * LCD Screen Height Register - */ -#define LYMAX_ADDR 0xfffffa0a -#define LYMAX WORD_REF(LYMAX_ADDR) - -#define LYMAX_YM_MASK 0x02ff /* Bits 10-15 are reserved */ - -/* - * LCD Cursor X Position Register - */ -#define LCXP_ADDR 0xfffffa18 -#define LCXP WORD_REF(LCXP_ADDR) - -#define LCXP_CC_MASK 0xc000 /* Cursor Control */ -#define LCXP_CC_TRAMSPARENT 0x0000 -#define LCXP_CC_BLACK 0x4000 -#define LCXP_CC_REVERSED 0x8000 -#define LCXP_CC_WHITE 0xc000 -#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ - -/* - * LCD Cursor Y Position Register - */ -#define LCYP_ADDR 0xfffffa1a -#define LCYP WORD_REF(LCYP_ADDR) - -#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ - -/* - * LCD Cursor Width and Heigth Register - */ -#define LCWCH_ADDR 0xfffffa1c -#define LCWCH WORD_REF(LCWCH_ADDR) - -#define LCWCH_CH_MASK 0x001f /* Cursor Height */ -#define LCWCH_CH_SHIFT 0 -#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ -#define LCWCH_CW_SHIFT 8 - -/* - * LCD Blink Control Register - */ -#define LBLKC_ADDR 0xfffffa1f -#define LBLKC BYTE_REF(LBLKC_ADDR) - -#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ -#define LBLKC_BD_SHIFT 0 -#define LBLKC_BKEN 0x80 /* Blink Enabled */ - -/* - * LCD Panel Interface Configuration Register - */ -#define LPICF_ADDR 0xfffffa20 -#define LPICF BYTE_REF(LPICF_ADDR) - -#define LPICF_GS_MASK 0x01 /* Gray-Scale Mode */ -#define LPICF_GS_BW 0x00 -#define LPICF_GS_GRAY_4 0x01 -#define LPICF_PBSIZ_MASK 0x06 /* Panel Bus Width */ -#define LPICF_PBSIZ_1 0x00 -#define LPICF_PBSIZ_2 0x02 -#define LPICF_PBSIZ_4 0x04 - -/* - * LCD Polarity Configuration Register - */ -#define LPOLCF_ADDR 0xfffffa21 -#define LPOLCF BYTE_REF(LPOLCF_ADDR) - -#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ -#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ -#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ -#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ - -/* - * LACD (LCD Alternate Crystal Direction) Rate Control Register - */ -#define LACDRC_ADDR 0xfffffa23 -#define LACDRC BYTE_REF(LACDRC_ADDR) - -#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ -#define LACDRC_ACD_SHIFT 0 - -/* - * LCD Pixel Clock Divider Register - */ -#define LPXCD_ADDR 0xfffffa25 -#define LPXCD BYTE_REF(LPXCD_ADDR) - -#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ -#define LPXCD_PCD_SHIFT 0 - -/* - * LCD Clocking Control Register - */ -#define LCKCON_ADDR 0xfffffa27 -#define LCKCON BYTE_REF(LCKCON_ADDR) - -#define LCKCON_PCDS 0x01 /* Pixel Clock Divider Source Select */ -#define LCKCON_DWIDTH 0x02 /* Display Memory Width */ -#define LCKCON_DWS_MASK 0x3c /* Display Wait-State */ -#define LCKCON_DWS_SHIFT 2 -#define LCKCON_DMA16 0x40 /* DMA burst length */ -#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ - -/* 'EZ328-compatible definitions */ -#define LCKCON_DW_MASK LCKCON_DWS_MASK -#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT - -/* - * LCD Last Buffer Address Register - */ -#define LLBAR_ADDR 0xfffffa29 -#define LLBAR BYTE_REF(LLBAR_ADDR) - -#define LLBAR_LBAR_MASK 0x7f /* Number of memory words to fill 1 line */ -#define LLBAR_LBAR_SHIFT 0 - -/* - * LCD Octet Terminal Count Register - */ -#define LOTCR_ADDR 0xfffffa2b -#define LOTCR BYTE_REF(LOTCR_ADDR) - -/* - * LCD Panning Offset Register - */ -#define LPOSR_ADDR 0xfffffa2d -#define LPOSR BYTE_REF(LPOSR_ADDR) - -#define LPOSR_BOS 0x08 /* Byte offset (for B/W mode only */ -#define LPOSR_POS_MASK 0x07 /* Pixel Offset Code */ -#define LPOSR_POS_SHIFT 0 - -/* - * LCD Frame Rate Control Modulation Register - */ -#define LFRCM_ADDR 0xfffffa31 -#define LFRCM BYTE_REF(LFRCM_ADDR) - -#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ -#define LFRCM_YMOD_SHIFT 0 -#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ -#define LFRCM_XMOD_SHIFT 4 - -/* - * LCD Gray Palette Mapping Register - */ -#define LGPMR_ADDR 0xfffffa32 -#define LGPMR WORD_REF(LGPMR_ADDR) - -#define LGPMR_GLEVEL3_MASK 0x000f -#define LGPMR_GLEVEL3_SHIFT 0 -#define LGPMR_GLEVEL2_MASK 0x00f0 -#define LGPMR_GLEVEL2_SHIFT 4 -#define LGPMR_GLEVEL0_MASK 0x0f00 -#define LGPMR_GLEVEL0_SHIFT 8 -#define LGPMR_GLEVEL1_MASK 0xf000 -#define LGPMR_GLEVEL1_SHIFT 12 - -/********** - * - * 0xFFFFFBxx -- Real-Time Clock (RTC) - * - **********/ - -/* - * RTC Hours Minutes and Seconds Register - */ -#define RTCTIME_ADDR 0xfffffb00 -#define RTCTIME LONG_REF(RTCTIME_ADDR) - -#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCTIME_SECONDS_SHIFT 0 -#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCTIME_MINUTES_SHIFT 16 -#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCTIME_HOURS_SHIFT 24 - -/* - * RTC Alarm Register - */ -#define RTCALRM_ADDR 0xfffffb04 -#define RTCALRM LONG_REF(RTCALRM_ADDR) - -#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCALRM_SECONDS_SHIFT 0 -#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCALRM_MINUTES_SHIFT 16 -#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCALRM_HOURS_SHIFT 24 - -/* - * RTC Control Register - */ -#define RTCCTL_ADDR 0xfffffb0c -#define RTCCTL WORD_REF(RTCCTL_ADDR) - -#define RTCCTL_384 0x0020 /* Crystal Selection */ -#define RTCCTL_ENABLE 0x0080 /* RTC Enable */ - -/* 'EZ328-compatible definitions */ -#define RTCCTL_XTL RTCCTL_384 -#define RTCCTL_EN RTCCTL_ENABLE - -/* - * RTC Interrupt Status Register - */ -#define RTCISR_ADDR 0xfffffb0e -#define RTCISR WORD_REF(RTCISR_ADDR) - -#define RTCISR_SW 0x0001 /* Stopwatch timed out */ -#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ -#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ -#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ -#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ - -/* - * RTC Interrupt Enable Register - */ -#define RTCIENR_ADDR 0xfffffb10 -#define RTCIENR WORD_REF(RTCIENR_ADDR) - -#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ -#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ -#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ -#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ -#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ - -/* - * Stopwatch Minutes Register - */ -#define STPWCH_ADDR 0xfffffb12 -#define STPWCH WORD_REF(STPWCH) - -#define STPWCH_CNT_MASK 0x00ff /* Stopwatch countdown value */ -#define SPTWCH_CNT_SHIFT 0 - -#endif /* _MC68328_H_ */ diff --git a/include/asm-m68knommu/MC68332.h b/include/asm-m68knommu/MC68332.h deleted file mode 100644 index 6bb8f02685a2..000000000000 --- a/include/asm-m68knommu/MC68332.h +++ /dev/null @@ -1,152 +0,0 @@ - -/* include/asm-m68knommu/MC68332.h: '332 control registers - * - * Copyright (C) 1998 Kenneth Albanowski , - * - */ - -#ifndef _MC68332_H_ -#define _MC68332_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) - -#define PORTE_ADDR 0xfffa11 -#define PORTE BYTE_REF(PORTE_ADDR) -#define DDRE_ADDR 0xfffa15 -#define DDRE BYTE_REF(DDRE_ADDR) -#define PEPAR_ADDR 0xfffa17 -#define PEPAR BYTE_REF(PEPAR_ADDR) - -#define PORTF_ADDR 0xfffa19 -#define PORTF BYTE_REF(PORTF_ADDR) -#define DDRF_ADDR 0xfffa1d -#define DDRF BYTE_REF(DDRF_ADDR) -#define PFPAR_ADDR 0xfffa1f -#define PFPAR BYTE_REF(PFPAR_ADDR) - -#define PORTQS_ADDR 0xfffc15 -#define PORTQS BYTE_REF(PORTQS_ADDR) -#define DDRQS_ADDR 0xfffc17 -#define DDRQS BYTE_REF(DDRQS_ADDR) -#define PQSPAR_ADDR 0xfffc16 -#define PQSPAR BYTE_REF(PQSPAR_ADDR) - -#define CSPAR0_ADDR 0xFFFA44 -#define CSPAR0 WORD_REF(CSPAR0_ADDR) -#define CSPAR1_ADDR 0xFFFA46 -#define CSPAR1 WORD_REF(CSPAR1_ADDR) -#define CSARBT_ADDR 0xFFFA48 -#define CSARBT WORD_REF(CSARBT_ADDR) -#define CSOPBT_ADDR 0xFFFA4A -#define CSOPBT WORD_REF(CSOPBT_ADDR) -#define CSBAR0_ADDR 0xFFFA4C -#define CSBAR0 WORD_REF(CSBAR0_ADDR) -#define CSOR0_ADDR 0xFFFA4E -#define CSOR0 WORD_REF(CSOR0_ADDR) -#define CSBAR1_ADDR 0xFFFA50 -#define CSBAR1 WORD_REF(CSBAR1_ADDR) -#define CSOR1_ADDR 0xFFFA52 -#define CSOR1 WORD_REF(CSOR1_ADDR) -#define CSBAR2_ADDR 0xFFFA54 -#define CSBAR2 WORD_REF(CSBAR2_ADDR) -#define CSOR2_ADDR 0xFFFA56 -#define CSOR2 WORD_REF(CSOR2_ADDR) -#define CSBAR3_ADDR 0xFFFA58 -#define CSBAR3 WORD_REF(CSBAR3_ADDR) -#define CSOR3_ADDR 0xFFFA5A -#define CSOR3 WORD_REF(CSOR3_ADDR) -#define CSBAR4_ADDR 0xFFFA5C -#define CSBAR4 WORD_REF(CSBAR4_ADDR) -#define CSOR4_ADDR 0xFFFA5E -#define CSOR4 WORD_REF(CSOR4_ADDR) -#define CSBAR5_ADDR 0xFFFA60 -#define CSBAR5 WORD_REF(CSBAR5_ADDR) -#define CSOR5_ADDR 0xFFFA62 -#define CSOR5 WORD_REF(CSOR5_ADDR) -#define CSBAR6_ADDR 0xFFFA64 -#define CSBAR6 WORD_REF(CSBAR6_ADDR) -#define CSOR6_ADDR 0xFFFA66 -#define CSOR6 WORD_REF(CSOR6_ADDR) -#define CSBAR7_ADDR 0xFFFA68 -#define CSBAR7 WORD_REF(CSBAR7_ADDR) -#define CSOR7_ADDR 0xFFFA6A -#define CSOR7 WORD_REF(CSOR7_ADDR) -#define CSBAR8_ADDR 0xFFFA6C -#define CSBAR8 WORD_REF(CSBAR8_ADDR) -#define CSOR8_ADDR 0xFFFA6E -#define CSOR8 WORD_REF(CSOR8_ADDR) -#define CSBAR9_ADDR 0xFFFA70 -#define CSBAR9 WORD_REF(CSBAR9_ADDR) -#define CSOR9_ADDR 0xFFFA72 -#define CSOR9 WORD_REF(CSOR9_ADDR) -#define CSBAR10_ADDR 0xFFFA74 -#define CSBAR10 WORD_REF(CSBAR10_ADDR) -#define CSOR10_ADDR 0xFFFA76 -#define CSOR10 WORD_REF(CSOR10_ADDR) - -#define CSOR_MODE_ASYNC 0x0000 -#define CSOR_MODE_SYNC 0x8000 -#define CSOR_MODE_MASK 0x8000 -#define CSOR_BYTE_DISABLE 0x0000 -#define CSOR_BYTE_UPPER 0x4000 -#define CSOR_BYTE_LOWER 0x2000 -#define CSOR_BYTE_BOTH 0x6000 -#define CSOR_BYTE_MASK 0x6000 -#define CSOR_RW_RSVD 0x0000 -#define CSOR_RW_READ 0x0800 -#define CSOR_RW_WRITE 0x1000 -#define CSOR_RW_BOTH 0x1800 -#define CSOR_RW_MASK 0x1800 -#define CSOR_STROBE_DS 0x0400 -#define CSOR_STROBE_AS 0x0000 -#define CSOR_STROBE_MASK 0x0400 -#define CSOR_DSACK_WAIT(x) (wait << 6) -#define CSOR_DSACK_FTERM (14 << 6) -#define CSOR_DSACK_EXTERNAL (15 << 6) -#define CSOR_DSACK_MASK 0x03c0 -#define CSOR_SPACE_CPU 0x0000 -#define CSOR_SPACE_USER 0x0010 -#define CSOR_SPACE_SU 0x0020 -#define CSOR_SPACE_BOTH 0x0030 -#define CSOR_SPACE_MASK 0x0030 -#define CSOR_IPL_ALL 0x0000 -#define CSOR_IPL_PRIORITY(x) (x << 1) -#define CSOR_IPL_MASK 0x000e -#define CSOR_AVEC_ON 0x0001 -#define CSOR_AVEC_OFF 0x0000 -#define CSOR_AVEC_MASK 0x0001 - -#define CSBAR_ADDR(x) ((addr >> 11) << 3) -#define CSBAR_ADDR_MASK 0xfff8 -#define CSBAR_BLKSIZE_2K 0x0000 -#define CSBAR_BLKSIZE_8K 0x0001 -#define CSBAR_BLKSIZE_16K 0x0002 -#define CSBAR_BLKSIZE_64K 0x0003 -#define CSBAR_BLKSIZE_128K 0x0004 -#define CSBAR_BLKSIZE_256K 0x0005 -#define CSBAR_BLKSIZE_512K 0x0006 -#define CSBAR_BLKSIZE_1M 0x0007 -#define CSBAR_BLKSIZE_MASK 0x0007 - -#define CSPAR_DISC 0 -#define CSPAR_ALT 1 -#define CSPAR_CS8 2 -#define CSPAR_CS16 3 -#define CSPAR_MASK 3 - -#define CSPAR0_CSBOOT(x) (x << 0) -#define CSPAR0_CS0(x) (x << 2) -#define CSPAR0_CS1(x) (x << 4) -#define CSPAR0_CS2(x) (x << 6) -#define CSPAR0_CS3(x) (x << 8) -#define CSPAR0_CS4(x) (x << 10) -#define CSPAR0_CS5(x) (x << 12) - -#define CSPAR1_CS6(x) (x << 0) -#define CSPAR1_CS7(x) (x << 2) -#define CSPAR1_CS8(x) (x << 4) -#define CSPAR1_CS9(x) (x << 6) -#define CSPAR1_CS10(x) (x << 8) - -#endif diff --git a/include/asm-m68knommu/MC68EZ328.h b/include/asm-m68knommu/MC68EZ328.h deleted file mode 100644 index 69b7f9139e5e..000000000000 --- a/include/asm-m68knommu/MC68EZ328.h +++ /dev/null @@ -1,1253 +0,0 @@ - -/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers - * - * Copyright (C) 1999 Vladimir Gurevich - * Bear & Hare Software, Inc. - * - * Based on include/asm-m68knommu/MC68332.h - * Copyright (C) 1998 Kenneth Albanowski , - * The Silver Hammer Group, Ltd. - * - */ - -#ifndef _MC68EZ328_H_ -#define _MC68EZ328_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) -#define LONG_REF(addr) (*((volatile unsigned long*)addr)) - -#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) -#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) - -/********** - * - * 0xFFFFF0xx -- System Control - * - **********/ - -/* - * System Control Register (SCR) - */ -#define SCR_ADDR 0xfffff000 -#define SCR BYTE_REF(SCR_ADDR) - -#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ -#define SCR_DMAP 0x04 /* Double Map */ -#define SCR_SO 0x08 /* Supervisor Only */ -#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ -#define SCR_PRV 0x20 /* Privilege Violation */ -#define SCR_WPV 0x40 /* Write Protect Violation */ -#define SCR_BETO 0x80 /* Bus-Error TimeOut */ - -/* - * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility) - */ -#define MRR_ADDR 0xfffff004 -#define MRR LONG_REF(MRR_ADDR) - -/********** - * - * 0xFFFFF1xx -- Chip-Select logic - * - **********/ - -/* - * Chip Select Group Base Registers - */ -#define CSGBA_ADDR 0xfffff100 -#define CSGBB_ADDR 0xfffff102 - -#define CSGBC_ADDR 0xfffff104 -#define CSGBD_ADDR 0xfffff106 - -#define CSGBA WORD_REF(CSGBA_ADDR) -#define CSGBB WORD_REF(CSGBB_ADDR) -#define CSGBC WORD_REF(CSGBC_ADDR) -#define CSGBD WORD_REF(CSGBD_ADDR) - -/* - * Chip Select Registers - */ -#define CSA_ADDR 0xfffff110 -#define CSB_ADDR 0xfffff112 -#define CSC_ADDR 0xfffff114 -#define CSD_ADDR 0xfffff116 - -#define CSA WORD_REF(CSA_ADDR) -#define CSB WORD_REF(CSB_ADDR) -#define CSC WORD_REF(CSC_ADDR) -#define CSD WORD_REF(CSD_ADDR) - -#define CSA_EN 0x0001 /* Chip-Select Enable */ -#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSA_SIZ_SHIFT 1 -#define CSA_WS_MASK 0x0070 /* Wait State */ -#define CSA_WS_SHIFT 4 -#define CSA_BSW 0x0080 /* Data Bus Width */ -#define CSA_FLASH 0x0100 /* FLASH Memory Support */ -#define CSA_RO 0x8000 /* Read-Only */ - -#define CSB_EN 0x0001 /* Chip-Select Enable */ -#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSB_SIZ_SHIFT 1 -#define CSB_WS_MASK 0x0070 /* Wait State */ -#define CSB_WS_SHIFT 4 -#define CSB_BSW 0x0080 /* Data Bus Width */ -#define CSB_FLASH 0x0100 /* FLASH Memory Support */ -#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSB_UPSIZ_SHIFT 11 -#define CSB_ROP 0x2000 /* Readonly if protected */ -#define CSB_SOP 0x4000 /* Supervisor only if protected */ -#define CSB_RO 0x8000 /* Read-Only */ - -#define CSC_EN 0x0001 /* Chip-Select Enable */ -#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSC_SIZ_SHIFT 1 -#define CSC_WS_MASK 0x0070 /* Wait State */ -#define CSC_WS_SHIFT 4 -#define CSC_BSW 0x0080 /* Data Bus Width */ -#define CSC_FLASH 0x0100 /* FLASH Memory Support */ -#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSC_UPSIZ_SHIFT 11 -#define CSC_ROP 0x2000 /* Readonly if protected */ -#define CSC_SOP 0x4000 /* Supervisor only if protected */ -#define CSC_RO 0x8000 /* Read-Only */ - -#define CSD_EN 0x0001 /* Chip-Select Enable */ -#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSD_SIZ_SHIFT 1 -#define CSD_WS_MASK 0x0070 /* Wait State */ -#define CSD_WS_SHIFT 4 -#define CSD_BSW 0x0080 /* Data Bus Width */ -#define CSD_FLASH 0x0100 /* FLASH Memory Support */ -#define CSD_DRAM 0x0200 /* Dram Selection */ -#define CSD_COMB 0x0400 /* Combining */ -#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSD_UPSIZ_SHIFT 11 -#define CSD_ROP 0x2000 /* Readonly if protected */ -#define CSD_SOP 0x4000 /* Supervisor only if protected */ -#define CSD_RO 0x8000 /* Read-Only */ - -/* - * Emulation Chip-Select Register - */ -#define EMUCS_ADDR 0xfffff118 -#define EMUCS WORD_REF(EMUCS_ADDR) - -#define EMUCS_WS_MASK 0x0070 -#define EMUCS_WS_SHIFT 4 - -/********** - * - * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control - * - **********/ - -/* - * PLL Control Register - */ -#define PLLCR_ADDR 0xfffff200 -#define PLLCR WORD_REF(PLLCR_ADDR) - -#define PLLCR_DISPLL 0x0008 /* Disable PLL */ -#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ -#define PLLCR_PRESC 0x0020 /* VCO prescaler */ -#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ -#define PLLCR_SYSCLK_SEL_SHIFT 8 -#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ -#define PLLCR_LCDCLK_SEL_SHIFT 11 - -/* '328-compatible definitions */ -#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK -#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT - -/* - * PLL Frequency Select Register - */ -#define PLLFSR_ADDR 0xfffff202 -#define PLLFSR WORD_REF(PLLFSR_ADDR) - -#define PLLFSR_PC_MASK 0x00ff /* P Count */ -#define PLLFSR_PC_SHIFT 0 -#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ -#define PLLFSR_QC_SHIFT 8 -#define PLLFSR_PROT 0x4000 /* Protect P & Q */ -#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ - -/* - * Power Control Register - */ -#define PCTRL_ADDR 0xfffff207 -#define PCTRL BYTE_REF(PCTRL_ADDR) - -#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ -#define PCTRL_WIDTH_SHIFT 0 -#define PCTRL_PCEN 0x80 /* Power Control Enable */ - -/********** - * - * 0xFFFFF3xx -- Interrupt Controller - * - **********/ - -/* - * Interrupt Vector Register - */ -#define IVR_ADDR 0xfffff300 -#define IVR BYTE_REF(IVR_ADDR) - -#define IVR_VECTOR_MASK 0xF8 - -/* - * Interrupt control Register - */ -#define ICR_ADDR 0xfffff302 -#define ICR WORD_REF(ICR_ADDR) - -#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */ -#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ -#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ -#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ -#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ -#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ -#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ -#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ -#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ - -/* - * Interrupt Mask Register - */ -#define IMR_ADDR 0xfffff304 -#define IMR LONG_REF(IMR_ADDR) - -/* - * Define the names for bit positions first. This is useful for - * request_irq - */ -#define SPI_IRQ_NUM 0 /* SPI interrupt */ -#define TMR_IRQ_NUM 1 /* Timer interrupt */ -#define UART_IRQ_NUM 2 /* UART interrupt */ -#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ -#define RTC_IRQ_NUM 4 /* RTC interrupt */ -#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ -#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */ -#define INT0_IRQ_NUM 8 /* External INT0 */ -#define INT1_IRQ_NUM 9 /* External INT1 */ -#define INT2_IRQ_NUM 10 /* External INT2 */ -#define INT3_IRQ_NUM 11 /* External INT3 */ -#define IRQ1_IRQ_NUM 16 /* IRQ1 */ -#define IRQ2_IRQ_NUM 17 /* IRQ2 */ -#define IRQ3_IRQ_NUM 18 /* IRQ3 */ -#define IRQ6_IRQ_NUM 19 /* IRQ6 */ -#define IRQ5_IRQ_NUM 20 /* IRQ5 */ -#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */ -#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */ - -/* '328-compatible definitions */ -#define SPIM_IRQ_NUM SPI_IRQ_NUM -#define TMR1_IRQ_NUM TMR_IRQ_NUM - -/* - * Here go the bitmasks themselves - */ -#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */ -#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */ -#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ -#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ -#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ -#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ -#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ -#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ -#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ -#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ -#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ -#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ -#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ -#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ -#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ -#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */ -#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */ -#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */ - -/* '328-compatible definitions */ -#define IMR_MSPIM IMR_MSPI -#define IMR_MTMR1 IMR_MTMR - -/* - * Interrupt Status Register - */ -#define ISR_ADDR 0xfffff30c -#define ISR LONG_REF(ISR_ADDR) - -#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ -#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ -#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ -#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ -#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ -#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ - -/* '328-compatible definitions */ -#define ISR_SPIM ISR_SPI -#define ISR_TMR1 ISR_TMR - -/* - * Interrupt Pending Register - */ -#define IPR_ADDR 0xfffff30c -#define IPR LONG_REF(IPR_ADDR) - -#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ -#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ -#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ -#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ -#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ -#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ - -/* '328-compatible definitions */ -#define IPR_SPIM IPR_SPI -#define IPR_TMR1 IPR_TMR - -/********** - * - * 0xFFFFF4xx -- Parallel Ports - * - **********/ - -/* - * Port A - */ -#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ -#define PADATA_ADDR 0xfffff401 /* Port A data register */ -#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */ - -#define PADIR BYTE_REF(PADIR_ADDR) -#define PADATA BYTE_REF(PADATA_ADDR) -#define PAPUEN BYTE_REF(PAPUEN_ADDR) - -#define PA(x) (1 << (x)) - -/* - * Port B - */ -#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ -#define PBDATA_ADDR 0xfffff409 /* Port B data register */ -#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */ -#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ - -#define PBDIR BYTE_REF(PBDIR_ADDR) -#define PBDATA BYTE_REF(PBDATA_ADDR) -#define PBPUEN BYTE_REF(PBPUEN_ADDR) -#define PBSEL BYTE_REF(PBSEL_ADDR) - -#define PB(x) (1 << (x)) - -#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */ -#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */ -#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */ -#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */ -#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */ -#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */ -#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */ -#define PB_PWMO 0x80 /* Use PWMO as PB[7] */ - -/* - * Port C - */ -#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ -#define PCDATA_ADDR 0xfffff411 /* Port C data register */ -#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */ -#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ - -#define PCDIR BYTE_REF(PCDIR_ADDR) -#define PCDATA BYTE_REF(PCDATA_ADDR) -#define PCPDEN BYTE_REF(PCPDEN_ADDR) -#define PCSEL BYTE_REF(PCSEL_ADDR) - -#define PC(x) (1 << (x)) - -#define PC_LD0 0x01 /* Use LD0 as PC[0] */ -#define PC_LD1 0x02 /* Use LD1 as PC[1] */ -#define PC_LD2 0x04 /* Use LD2 as PC[2] */ -#define PC_LD3 0x08 /* Use LD3 as PC[3] */ -#define PC_LFLM 0x10 /* Use LFLM as PC[4] */ -#define PC_LLP 0x20 /* Use LLP as PC[5] */ -#define PC_LCLK 0x40 /* Use LCLK as PC[6] */ -#define PC_LACD 0x80 /* Use LACD as PC[7] */ - -/* - * Port D - */ -#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ -#define PDDATA_ADDR 0xfffff419 /* Port D data register */ -#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ -#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */ -#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ -#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ -#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */ -#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ - -#define PDDIR BYTE_REF(PDDIR_ADDR) -#define PDDATA BYTE_REF(PDDATA_ADDR) -#define PDPUEN BYTE_REF(PDPUEN_ADDR) -#define PDSEL BYTE_REF(PDSEL_ADDR) -#define PDPOL BYTE_REF(PDPOL_ADDR) -#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) -#define PDKBEN BYTE_REF(PDKBEN_ADDR) -#define PDIQEG BYTE_REF(PDIQEG_ADDR) - -#define PD(x) (1 << (x)) - -#define PD_INT0 0x01 /* Use INT0 as PD[0] */ -#define PD_INT1 0x02 /* Use INT1 as PD[1] */ -#define PD_INT2 0x04 /* Use INT2 as PD[2] */ -#define PD_INT3 0x08 /* Use INT3 as PD[3] */ -#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */ -#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */ -#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */ -#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */ - -/* - * Port E - */ -#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ -#define PEDATA_ADDR 0xfffff421 /* Port E data register */ -#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ -#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ - -#define PEDIR BYTE_REF(PEDIR_ADDR) -#define PEDATA BYTE_REF(PEDATA_ADDR) -#define PEPUEN BYTE_REF(PEPUEN_ADDR) -#define PESEL BYTE_REF(PESEL_ADDR) - -#define PE(x) (1 << (x)) - -#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */ -#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */ -#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */ -#define PE_DWE 0x08 /* Use DWE as PE[3] */ -#define PE_RXD 0x10 /* Use RXD as PE[4] */ -#define PE_TXD 0x20 /* Use TXD as PE[5] */ -#define PE_RTS 0x40 /* Use RTS as PE[6] */ -#define PE_CTS 0x80 /* Use CTS as PE[7] */ - -/* - * Port F - */ -#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ -#define PFDATA_ADDR 0xfffff429 /* Port F data register */ -#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ -#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ - -#define PFDIR BYTE_REF(PFDIR_ADDR) -#define PFDATA BYTE_REF(PFDATA_ADDR) -#define PFPUEN BYTE_REF(PFPUEN_ADDR) -#define PFSEL BYTE_REF(PFSEL_ADDR) - -#define PF(x) (1 << (x)) - -#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */ -#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */ -#define PF_CLKO 0x04 /* Use CLKO as PF[2] */ -#define PF_A20 0x08 /* Use A20 as PF[3] */ -#define PF_A21 0x10 /* Use A21 as PF[4] */ -#define PF_A22 0x20 /* Use A22 as PF[5] */ -#define PF_A23 0x40 /* Use A23 as PF[6] */ -#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */ - -/* - * Port G - */ -#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ -#define PGDATA_ADDR 0xfffff431 /* Port G data register */ -#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ -#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ - -#define PGDIR BYTE_REF(PGDIR_ADDR) -#define PGDATA BYTE_REF(PGDATA_ADDR) -#define PGPUEN BYTE_REF(PGPUEN_ADDR) -#define PGSEL BYTE_REF(PGSEL_ADDR) - -#define PG(x) (1 << (x)) - -#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */ -#define PG_A0 0x02 /* Use A0 as PG[1] */ -#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */ -#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */ -#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */ -#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */ - -/********** - * - * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) - * - **********/ - -/* - * PWM Control Register - */ -#define PWMC_ADDR 0xfffff500 -#define PWMC WORD_REF(PWMC_ADDR) - -#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */ -#define PWMC_CLKSEL_SHIFT 0 -#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */ -#define PWMC_REPEAT_SHIFT 2 -#define PWMC_EN 0x0010 /* Enable PWM */ -#define PMNC_FIFOAV 0x0020 /* FIFO Available */ -#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */ -#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */ -#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */ -#define PWMC_PRESCALER_SHIFT 8 -#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ - -/* '328-compatible definitions */ -#define PWMC_PWMEN PWMC_EN - -/* - * PWM Sample Register - */ -#define PWMS_ADDR 0xfffff502 -#define PWMS WORD_REF(PWMS_ADDR) - -/* - * PWM Period Register - */ -#define PWMP_ADDR 0xfffff504 -#define PWMP BYTE_REF(PWMP_ADDR) - -/* - * PWM Counter Register - */ -#define PWMCNT_ADDR 0xfffff505 -#define PWMCNT BYTE_REF(PWMCNT_ADDR) - -/********** - * - * 0xFFFFF6xx -- General-Purpose Timer - * - **********/ - -/* - * Timer Control register - */ -#define TCTL_ADDR 0xfffff600 -#define TCTL WORD_REF(TCTL_ADDR) - -#define TCTL_TEN 0x0001 /* Timer Enable */ -#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ -#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ -#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ -#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ -#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ -#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ -#define TCTL_IRQEN 0x0010 /* IRQ Enable */ -#define TCTL_OM 0x0020 /* Output Mode */ -#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ -#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ -#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ -#define TCTL_FRR 0x0010 /* Free-Run Mode */ - -/* '328-compatible definitions */ -#define TCTL1_ADDR TCTL_ADDR -#define TCTL1 TCTL - -/* - * Timer Prescaler Register - */ -#define TPRER_ADDR 0xfffff602 -#define TPRER WORD_REF(TPRER_ADDR) - -/* '328-compatible definitions */ -#define TPRER1_ADDR TPRER_ADDR -#define TPRER1 TPRER - -/* - * Timer Compare Register - */ -#define TCMP_ADDR 0xfffff604 -#define TCMP WORD_REF(TCMP_ADDR) - -/* '328-compatible definitions */ -#define TCMP1_ADDR TCMP_ADDR -#define TCMP1 TCMP - -/* - * Timer Capture register - */ -#define TCR_ADDR 0xfffff606 -#define TCR WORD_REF(TCR_ADDR) - -/* '328-compatible definitions */ -#define TCR1_ADDR TCR_ADDR -#define TCR1 TCR - -/* - * Timer Counter Register - */ -#define TCN_ADDR 0xfffff608 -#define TCN WORD_REF(TCN_ADDR) - -/* '328-compatible definitions */ -#define TCN1_ADDR TCN_ADDR -#define TCN1 TCN - -/* - * Timer Status Register - */ -#define TSTAT_ADDR 0xfffff60a -#define TSTAT WORD_REF(TSTAT_ADDR) - -#define TSTAT_COMP 0x0001 /* Compare Event occurred */ -#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ - -/* '328-compatible definitions */ -#define TSTAT1_ADDR TSTAT_ADDR -#define TSTAT1 TSTAT - -/********** - * - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) - * - **********/ - -/* - * SPIM Data Register - */ -#define SPIMDATA_ADDR 0xfffff800 -#define SPIMDATA WORD_REF(SPIMDATA_ADDR) - -/* - * SPIM Control/Status Register - */ -#define SPIMCONT_ADDR 0xfffff802 -#define SPIMCONT WORD_REF(SPIMCONT_ADDR) - -#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ -#define SPIMCONT_BIT_COUNT_SHIFT 0 -#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ -#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ -#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ -#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */ -#define SPIMCONT_XCH 0x0100 /* Exchange */ -#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */ -#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ -#define SPIMCONT_DATA_RATE_SHIFT 13 - -/* '328-compatible definitions */ -#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ -#define SPIMCONT_SPIMEN SPIMCONT_ENABLE - -/********** - * - * 0xFFFFF9xx -- UART - * - **********/ - -/* - * UART Status/Control Register - */ -#define USTCNT_ADDR 0xfffff900 -#define USTCNT WORD_REF(USTCNT_ADDR) - -#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */ -#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */ -#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */ -#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */ -#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */ -#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */ -#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */ -#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */ -#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ -#define USTCNT_STOP 0x0200 /* Stop bit transmission */ -#define USTCNT_ODD 0x0400 /* Odd Parity */ -#define USTCNT_PEN 0x0800 /* Parity Enable */ -#define USTCNT_CLKM 0x1000 /* Clock Mode Select */ -#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ -#define USTCNT_RXEN 0x4000 /* Receiver Enable */ -#define USTCNT_UEN 0x8000 /* UART Enable */ - -/* '328-compatible definitions */ -#define USTCNT_TXAVAILEN USTCNT_TXAE -#define USTCNT_TXHALFEN USTCNT_TXHE -#define USTCNT_TXEMPTYEN USTCNT_TXEE -#define USTCNT_RXREADYEN USTCNT_RXRE -#define USTCNT_RXHALFEN USTCNT_RXHE -#define USTCNT_RXFULLEN USTCNT_RXFE -#define USTCNT_CTSDELTAEN USTCNT_CTSD -#define USTCNT_ODD_EVEN USTCNT_ODD -#define USTCNT_PARITYEN USTCNT_PEN -#define USTCNT_CLKMODE USTCNT_CLKM -#define USTCNT_UARTEN USTCNT_UEN - -/* - * UART Baud Control Register - */ -#define UBAUD_ADDR 0xfffff902 -#define UBAUD WORD_REF(UBAUD_ADDR) - -#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ -#define UBAUD_PRESCALER_SHIFT 0 -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ -#define UBAUD_DIVIDE_SHIFT 8 -#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ -#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */ - -/* - * UART Receiver Register - */ -#define URX_ADDR 0xfffff904 -#define URX WORD_REF(URX_ADDR) - -#define URX_RXDATA_ADDR 0xfffff905 -#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) - -#define URX_RXDATA_MASK 0x00ff /* Received data */ -#define URX_RXDATA_SHIFT 0 -#define URX_PARITY_ERROR 0x0100 /* Parity Error */ -#define URX_BREAK 0x0200 /* Break Detected */ -#define URX_FRAME_ERROR 0x0400 /* Framing Error */ -#define URX_OVRUN 0x0800 /* Serial Overrun */ -#define URX_OLD_DATA 0x1000 /* Old data in FIFO */ -#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ -#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ -#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ - -/* - * UART Transmitter Register - */ -#define UTX_ADDR 0xfffff906 -#define UTX WORD_REF(UTX_ADDR) - -#define UTX_TXDATA_ADDR 0xfffff907 -#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) - -#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ -#define UTX_TXDATA_SHIFT 0 -#define UTX_CTS_DELTA 0x0100 /* CTS changed */ -#define UTX_CTS_STAT 0x0200 /* CTS State */ -#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */ -#define UTX_NOCTS 0x0800 /* Ignore CTS */ -#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ -#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ -#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ -#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ - -/* '328-compatible definitions */ -#define UTX_CTS_STATUS UTX_CTS_STAT -#define UTX_IGNORE_CTS UTX_NOCTS - -/* - * UART Miscellaneous Register - */ -#define UMISC_ADDR 0xfffff908 -#define UMISC WORD_REF(UMISC_ADDR) - -#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ -#define UMISC_RX_POL 0x0008 /* Receive Polarity */ -#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ -#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ -#define UMISC_RTS 0x0040 /* Set RTS status */ -#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ -#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */ -#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */ -#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ -#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ -#define UMISC_CLKSRC 0x4000 /* Clock Source */ -#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */ - -/* - * UART Non-integer Prescaler Register - */ -#define NIPR_ADDR 0xfffff90a -#define NIPR WORD_REF(NIPR_ADDR) - -#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */ -#define NIPR_STEP_VALUE_SHIFT 0 -#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */ -#define NIPR_SELECT_SHIFT 8 -#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */ - - -/* generalization of uart control registers to support multiple ports: */ -typedef volatile struct { - volatile unsigned short int ustcnt; - volatile unsigned short int ubaud; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char rxdata; - } b; - } urx; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char txdata; - } b; - } utx; - volatile unsigned short int umisc; - volatile unsigned short int nipr; - volatile unsigned short int pad1; - volatile unsigned short int pad2; -} __attribute__((packed)) m68328_uart; - - -/********** - * - * 0xFFFFFAxx -- LCD Controller - * - **********/ - -/* - * LCD Screen Starting Address Register - */ -#define LSSA_ADDR 0xfffffa00 -#define LSSA LONG_REF(LSSA_ADDR) - -#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */ - -/* - * LCD Virtual Page Width Register - */ -#define LVPW_ADDR 0xfffffa05 -#define LVPW BYTE_REF(LVPW_ADDR) - -/* - * LCD Screen Width Register (not compatible with '328 !!!) - */ -#define LXMAX_ADDR 0xfffffa08 -#define LXMAX WORD_REF(LXMAX_ADDR) - -#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */ - -/* - * LCD Screen Height Register - */ -#define LYMAX_ADDR 0xfffffa0a -#define LYMAX WORD_REF(LYMAX_ADDR) - -#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */ - -/* - * LCD Cursor X Position Register - */ -#define LCXP_ADDR 0xfffffa18 -#define LCXP WORD_REF(LCXP_ADDR) - -#define LCXP_CC_MASK 0xc000 /* Cursor Control */ -#define LCXP_CC_TRAMSPARENT 0x0000 -#define LCXP_CC_BLACK 0x4000 -#define LCXP_CC_REVERSED 0x8000 -#define LCXP_CC_WHITE 0xc000 -#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ - -/* - * LCD Cursor Y Position Register - */ -#define LCYP_ADDR 0xfffffa1a -#define LCYP WORD_REF(LCYP_ADDR) - -#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ - -/* - * LCD Cursor Width and Heigth Register - */ -#define LCWCH_ADDR 0xfffffa1c -#define LCWCH WORD_REF(LCWCH_ADDR) - -#define LCWCH_CH_MASK 0x001f /* Cursor Height */ -#define LCWCH_CH_SHIFT 0 -#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ -#define LCWCH_CW_SHIFT 8 - -/* - * LCD Blink Control Register - */ -#define LBLKC_ADDR 0xfffffa1f -#define LBLKC BYTE_REF(LBLKC_ADDR) - -#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ -#define LBLKC_BD_SHIFT 0 -#define LBLKC_BKEN 0x80 /* Blink Enabled */ - -/* - * LCD Panel Interface Configuration Register - */ -#define LPICF_ADDR 0xfffffa20 -#define LPICF BYTE_REF(LPICF_ADDR) - -#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */ -#define LPICF_GS_BW 0x00 -#define LPICF_GS_GRAY_4 0x01 -#define LPICF_GS_GRAY_16 0x02 -#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */ -#define LPICF_PBSIZ_1 0x00 -#define LPICF_PBSIZ_2 0x04 -#define LPICF_PBSIZ_4 0x08 - -/* - * LCD Polarity Configuration Register - */ -#define LPOLCF_ADDR 0xfffffa21 -#define LPOLCF BYTE_REF(LPOLCF_ADDR) - -#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ -#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ -#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ -#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ - -/* - * LACD (LCD Alternate Crystal Direction) Rate Control Register - */ -#define LACDRC_ADDR 0xfffffa23 -#define LACDRC BYTE_REF(LACDRC_ADDR) - -#define LACDRC_ACDSLT 0x80 /* Signal Source Select */ -#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ -#define LACDRC_ACD_SHIFT 0 - -/* - * LCD Pixel Clock Divider Register - */ -#define LPXCD_ADDR 0xfffffa25 -#define LPXCD BYTE_REF(LPXCD_ADDR) - -#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ -#define LPXCD_PCD_SHIFT 0 - -/* - * LCD Clocking Control Register - */ -#define LCKCON_ADDR 0xfffffa27 -#define LCKCON BYTE_REF(LCKCON_ADDR) - -#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */ -#define LCKCON_DWS_SHIFT 0 -#define LCKCON_DWIDTH 0x40 /* Display Memory Width */ -#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ - -/* '328-compatible definitions */ -#define LCKCON_DW_MASK LCKCON_DWS_MASK -#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT - -/* - * LCD Refresh Rate Adjustment Register - */ -#define LRRA_ADDR 0xfffffa29 -#define LRRA BYTE_REF(LRRA_ADDR) - -/* - * LCD Panning Offset Register - */ -#define LPOSR_ADDR 0xfffffa2d -#define LPOSR BYTE_REF(LPOSR_ADDR) - -#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */ -#define LPOSR_POS_SHIFT 0 - -/* - * LCD Frame Rate Control Modulation Register - */ -#define LFRCM_ADDR 0xfffffa31 -#define LFRCM BYTE_REF(LFRCM_ADDR) - -#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ -#define LFRCM_YMOD_SHIFT 0 -#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ -#define LFRCM_XMOD_SHIFT 4 - -/* - * LCD Gray Palette Mapping Register - */ -#define LGPMR_ADDR 0xfffffa33 -#define LGPMR BYTE_REF(LGPMR_ADDR) - -#define LGPMR_G1_MASK 0x0f -#define LGPMR_G1_SHIFT 0 -#define LGPMR_G2_MASK 0xf0 -#define LGPMR_G2_SHIFT 4 - -/* - * PWM Contrast Control Register - */ -#define PWMR_ADDR 0xfffffa36 -#define PWMR WORD_REF(PWMR_ADDR) - -#define PWMR_PW_MASK 0x00ff /* Pulse Width */ -#define PWMR_PW_SHIFT 0 -#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */ -#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */ -#define PWMR_SRC_LINE 0x0000 /* Line Pulse */ -#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */ -#define PWMR_SRC_LCD 0x4000 /* LCD clock */ - -/********** - * - * 0xFFFFFBxx -- Real-Time Clock (RTC) - * - **********/ - -/* - * RTC Hours Minutes and Seconds Register - */ -#define RTCTIME_ADDR 0xfffffb00 -#define RTCTIME LONG_REF(RTCTIME_ADDR) - -#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCTIME_SECONDS_SHIFT 0 -#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCTIME_MINUTES_SHIFT 16 -#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCTIME_HOURS_SHIFT 24 - -/* - * RTC Alarm Register - */ -#define RTCALRM_ADDR 0xfffffb04 -#define RTCALRM LONG_REF(RTCALRM_ADDR) - -#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCALRM_SECONDS_SHIFT 0 -#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCALRM_MINUTES_SHIFT 16 -#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCALRM_HOURS_SHIFT 24 - -/* - * Watchdog Timer Register - */ -#define WATCHDOG_ADDR 0xfffffb0a -#define WATCHDOG WORD_REF(WATCHDOG_ADDR) - -#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */ -#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */ -#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */ -#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */ -#define WATCHDOG_CNT_SHIFT 8 - -/* - * RTC Control Register - */ -#define RTCCTL_ADDR 0xfffffb0c -#define RTCCTL WORD_REF(RTCCTL_ADDR) - -#define RTCCTL_XTL 0x0020 /* Crystal Selection */ -#define RTCCTL_EN 0x0080 /* RTC Enable */ - -/* '328-compatible definitions */ -#define RTCCTL_384 RTCCTL_XTL -#define RTCCTL_ENABLE RTCCTL_EN - -/* - * RTC Interrupt Status Register - */ -#define RTCISR_ADDR 0xfffffb0e -#define RTCISR WORD_REF(RTCISR_ADDR) - -#define RTCISR_SW 0x0001 /* Stopwatch timed out */ -#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ -#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ -#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ -#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ -#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */ -#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */ -#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */ -#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */ -#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */ -#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */ -#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */ -#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */ -#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */ - -/* - * RTC Interrupt Enable Register - */ -#define RTCIENR_ADDR 0xfffffb10 -#define RTCIENR WORD_REF(RTCIENR_ADDR) - -#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ -#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ -#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ -#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ -#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ -#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */ -#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */ -#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */ -#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */ -#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */ -#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */ -#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */ -#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */ -#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */ - -/* - * Stopwatch Minutes Register - */ -#define STPWCH_ADDR 0xfffffb12 -#define STPWCH WORD_REF(STPWCH) - -#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */ -#define SPTWCH_CNT_SHIFT 0 - -/* - * RTC Day Count Register - */ -#define DAYR_ADDR 0xfffffb1a -#define DAYR WORD_REF(DAYR_ADDR) - -#define DAYR_DAYS_MASK 0x1ff /* Day Setting */ -#define DAYR_DAYS_SHIFT 0 - -/* - * RTC Day Alarm Register - */ -#define DAYALARM_ADDR 0xfffffb1c -#define DAYALARM WORD_REF(DAYALARM_ADDR) - -#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */ -#define DAYALARM_DAYSAL_SHIFT 0 - -/********** - * - * 0xFFFFFCxx -- DRAM Controller - * - **********/ - -/* - * DRAM Memory Configuration Register - */ -#define DRAMMC_ADDR 0xfffffc00 -#define DRAMMC WORD_REF(DRAMMC_ADDR) - -#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */ -#define DRAMMC_ROW12_PA10 0x0000 -#define DRAMMC_ROW12_PA21 0x4000 -#define DRAMMC_ROW12_PA23 0x8000 -#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */ -#define DRAMMC_ROW0_PA11 0x0000 -#define DRAMMC_ROW0_PA22 0x1000 -#define DRAMMC_ROW0_PA23 0x2000 -#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */ -#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */ -#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */ -#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */ -#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */ -#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */ -#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */ -#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */ -#define DRAMMC_REF_SHIFT 0 - -/* - * DRAM Control Register - */ -#define DRAMC_ADDR 0xfffffc02 -#define DRAMC WORD_REF(DRAMC_ADDR) - -#define DRAMC_DWE 0x0001 /* DRAM Write Enable */ -#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */ -#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */ -#define DRAMC_SLW 0x0008 /* Slow RAM */ -#define DRAMC_LSP 0x0010 /* Light Sleep */ -#define DRAMC_MSW 0x0020 /* Slow Multiplexing */ -#define DRAMC_WS_MASK 0x00c0 /* Wait-states */ -#define DRAMC_WS_SHIFT 6 -#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */ -#define DRAMC_PGSZ_SHIFT 8 -#define DRAMC_PGSZ_256K 0x0000 -#define DRAMC_PGSZ_512K 0x0100 -#define DRAMC_PGSZ_1024K 0x0200 -#define DRAMC_PGSZ_2048K 0x0300 -#define DRAMC_EDO 0x0400 /* EDO DRAM */ -#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */ -#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */ -#define DRAMC_BC_SHIFT 12 -#define DRAMC_RM 0x4000 /* Refresh Mode */ -#define DRAMC_EN 0x8000 /* DRAM Controller enable */ - - -/********** - * - * 0xFFFFFDxx -- In-Circuit Emulation (ICE) - * - **********/ - -/* - * ICE Module Address Compare Register - */ -#define ICEMACR_ADDR 0xfffffd00 -#define ICEMACR LONG_REF(ICEMACR_ADDR) - -/* - * ICE Module Address Mask Register - */ -#define ICEMAMR_ADDR 0xfffffd04 -#define ICEMAMR LONG_REF(ICEMAMR_ADDR) - -/* - * ICE Module Control Compare Register - */ -#define ICEMCCR_ADDR 0xfffffd08 -#define ICEMCCR WORD_REF(ICEMCCR_ADDR) - -#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */ -#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */ - -/* - * ICE Module Control Mask Register - */ -#define ICEMCMR_ADDR 0xfffffd0a -#define ICEMCMR WORD_REF(ICEMCMR_ADDR) - -#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */ -#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */ - -/* - * ICE Module Control Register - */ -#define ICEMCR_ADDR 0xfffffd0c -#define ICEMCR WORD_REF(ICEMCR_ADDR) - -#define ICEMCR_CEN 0x0001 /* Compare Enable */ -#define ICEMCR_PBEN 0x0002 /* Program Break Enable */ -#define ICEMCR_SB 0x0004 /* Single Breakpoint */ -#define ICEMCR_HMDIS 0x0008 /* HardMap disable */ -#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */ - -/* - * ICE Module Status Register - */ -#define ICEMSR_ADDR 0xfffffd0e -#define ICEMSR WORD_REF(ICEMSR_ADDR) - -#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */ -#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */ -#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */ -#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */ - -#endif /* _MC68EZ328_H_ */ diff --git a/include/asm-m68knommu/MC68VZ328.h b/include/asm-m68knommu/MC68VZ328.h deleted file mode 100644 index 2b9bf626a0a5..000000000000 --- a/include/asm-m68knommu/MC68VZ328.h +++ /dev/null @@ -1,1349 +0,0 @@ - -/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers - * - * Copyright (c) 2000-2001 Lineo Inc. - * Copyright (c) 2000-2001 Lineo Canada Corp. - * Copyright (C) 1999 Vladimir Gurevich - * Bare & Hare Software, Inc. - * Based on include/asm-m68knommu/MC68332.h - * Copyright (C) 1998 Kenneth Albanowski , - * The Silver Hammer Group, Ltd. - * - * M68VZ328 fixes by Evan Stawnyczy - * vz multiport fixes by Michael Leslie - */ - -#ifndef _MC68VZ328_H_ -#define _MC68VZ328_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) -#define LONG_REF(addr) (*((volatile unsigned long*)addr)) - -#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) -#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) - -/********** - * - * 0xFFFFF0xx -- System Control - * - **********/ - -/* - * System Control Register (SCR) - */ -#define SCR_ADDR 0xfffff000 -#define SCR BYTE_REF(SCR_ADDR) - -#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ -#define SCR_DMAP 0x04 /* Double Map */ -#define SCR_SO 0x08 /* Supervisor Only */ -#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ -#define SCR_PRV 0x20 /* Privilege Violation */ -#define SCR_WPV 0x40 /* Write Protect Violation */ -#define SCR_BETO 0x80 /* Bus-Error TimeOut */ - -/* - * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility) - */ -#define MRR_ADDR 0xfffff004 -#define MRR LONG_REF(MRR_ADDR) - -/********** - * - * 0xFFFFF1xx -- Chip-Select logic - * - **********/ - -/* - * Chip Select Group Base Registers - */ -#define CSGBA_ADDR 0xfffff100 -#define CSGBB_ADDR 0xfffff102 - -#define CSGBC_ADDR 0xfffff104 -#define CSGBD_ADDR 0xfffff106 - -#define CSGBA WORD_REF(CSGBA_ADDR) -#define CSGBB WORD_REF(CSGBB_ADDR) -#define CSGBC WORD_REF(CSGBC_ADDR) -#define CSGBD WORD_REF(CSGBD_ADDR) - -/* - * Chip Select Registers - */ -#define CSA_ADDR 0xfffff110 -#define CSB_ADDR 0xfffff112 -#define CSC_ADDR 0xfffff114 -#define CSD_ADDR 0xfffff116 - -#define CSA WORD_REF(CSA_ADDR) -#define CSB WORD_REF(CSB_ADDR) -#define CSC WORD_REF(CSC_ADDR) -#define CSD WORD_REF(CSD_ADDR) - -#define CSA_EN 0x0001 /* Chip-Select Enable */ -#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSA_SIZ_SHIFT 1 -#define CSA_WS_MASK 0x0070 /* Wait State */ -#define CSA_WS_SHIFT 4 -#define CSA_BSW 0x0080 /* Data Bus Width */ -#define CSA_FLASH 0x0100 /* FLASH Memory Support */ -#define CSA_RO 0x8000 /* Read-Only */ - -#define CSB_EN 0x0001 /* Chip-Select Enable */ -#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSB_SIZ_SHIFT 1 -#define CSB_WS_MASK 0x0070 /* Wait State */ -#define CSB_WS_SHIFT 4 -#define CSB_BSW 0x0080 /* Data Bus Width */ -#define CSB_FLASH 0x0100 /* FLASH Memory Support */ -#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSB_UPSIZ_SHIFT 11 -#define CSB_ROP 0x2000 /* Readonly if protected */ -#define CSB_SOP 0x4000 /* Supervisor only if protected */ -#define CSB_RO 0x8000 /* Read-Only */ - -#define CSC_EN 0x0001 /* Chip-Select Enable */ -#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSC_SIZ_SHIFT 1 -#define CSC_WS_MASK 0x0070 /* Wait State */ -#define CSC_WS_SHIFT 4 -#define CSC_BSW 0x0080 /* Data Bus Width */ -#define CSC_FLASH 0x0100 /* FLASH Memory Support */ -#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSC_UPSIZ_SHIFT 11 -#define CSC_ROP 0x2000 /* Readonly if protected */ -#define CSC_SOP 0x4000 /* Supervisor only if protected */ -#define CSC_RO 0x8000 /* Read-Only */ - -#define CSD_EN 0x0001 /* Chip-Select Enable */ -#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSD_SIZ_SHIFT 1 -#define CSD_WS_MASK 0x0070 /* Wait State */ -#define CSD_WS_SHIFT 4 -#define CSD_BSW 0x0080 /* Data Bus Width */ -#define CSD_FLASH 0x0100 /* FLASH Memory Support */ -#define CSD_DRAM 0x0200 /* Dram Selection */ -#define CSD_COMB 0x0400 /* Combining */ -#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSD_UPSIZ_SHIFT 11 -#define CSD_ROP 0x2000 /* Readonly if protected */ -#define CSD_SOP 0x4000 /* Supervisor only if protected */ -#define CSD_RO 0x8000 /* Read-Only */ - -/* - * Emulation Chip-Select Register - */ -#define EMUCS_ADDR 0xfffff118 -#define EMUCS WORD_REF(EMUCS_ADDR) - -#define EMUCS_WS_MASK 0x0070 -#define EMUCS_WS_SHIFT 4 - -/********** - * - * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control - * - **********/ - -/* - * PLL Control Register - */ -#define PLLCR_ADDR 0xfffff200 -#define PLLCR WORD_REF(PLLCR_ADDR) - -#define PLLCR_DISPLL 0x0008 /* Disable PLL */ -#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ -#define PLLCR_PRESC 0x0020 /* VCO prescaler */ -#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ -#define PLLCR_SYSCLK_SEL_SHIFT 8 -#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ -#define PLLCR_LCDCLK_SEL_SHIFT 11 - -/* '328-compatible definitions */ -#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK -#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT - -/* - * PLL Frequency Select Register - */ -#define PLLFSR_ADDR 0xfffff202 -#define PLLFSR WORD_REF(PLLFSR_ADDR) - -#define PLLFSR_PC_MASK 0x00ff /* P Count */ -#define PLLFSR_PC_SHIFT 0 -#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ -#define PLLFSR_QC_SHIFT 8 -#define PLLFSR_PROT 0x4000 /* Protect P & Q */ -#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ - -/* - * Power Control Register - */ -#define PCTRL_ADDR 0xfffff207 -#define PCTRL BYTE_REF(PCTRL_ADDR) - -#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ -#define PCTRL_WIDTH_SHIFT 0 -#define PCTRL_PCEN 0x80 /* Power Control Enable */ - -/********** - * - * 0xFFFFF3xx -- Interrupt Controller - * - **********/ - -/* - * Interrupt Vector Register - */ -#define IVR_ADDR 0xfffff300 -#define IVR BYTE_REF(IVR_ADDR) - -#define IVR_VECTOR_MASK 0xF8 - -/* - * Interrupt control Register - */ -#define ICR_ADDR 0xfffff302 -#define ICR WORD_REF(ICR_ADDR) - -#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */ -#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ -#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ -#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ -#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ -#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ -#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ -#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ -#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ - -/* - * Interrupt Mask Register - */ -#define IMR_ADDR 0xfffff304 -#define IMR LONG_REF(IMR_ADDR) - -/* - * Define the names for bit positions first. This is useful for - * request_irq - */ -#define SPI2_IRQ_NUM 0 /* SPI 2 interrupt */ -#define TMR_IRQ_NUM 1 /* Timer 1 interrupt */ -#define UART1_IRQ_NUM 2 /* UART 1 interrupt */ -#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ -#define RTC_IRQ_NUM 4 /* RTC interrupt */ -#define TMR2_IRQ_NUM 5 /* Timer 2 interrupt */ -#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ -#define PWM1_IRQ_NUM 7 /* Pulse-Width Modulator 1 int. */ -#define INT0_IRQ_NUM 8 /* External INT0 */ -#define INT1_IRQ_NUM 9 /* External INT1 */ -#define INT2_IRQ_NUM 10 /* External INT2 */ -#define INT3_IRQ_NUM 11 /* External INT3 */ -#define UART2_IRQ_NUM 12 /* UART 2 interrupt */ -#define PWM2_IRQ_NUM 13 /* Pulse-Width Modulator 1 int. */ -#define IRQ1_IRQ_NUM 16 /* IRQ1 */ -#define IRQ2_IRQ_NUM 17 /* IRQ2 */ -#define IRQ3_IRQ_NUM 18 /* IRQ3 */ -#define IRQ6_IRQ_NUM 19 /* IRQ6 */ -#define IRQ5_IRQ_NUM 20 /* IRQ5 */ -#define SPI1_IRQ_NUM 21 /* SPI 1 interrupt */ -#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */ -#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */ - -#define SPI_IRQ_NUM SPI2_IRQ_NUM - -/* '328-compatible definitions */ -#define SPIM_IRQ_NUM SPI_IRQ_NUM -#define TMR1_IRQ_NUM TMR_IRQ_NUM -#define UART_IRQ_NUM UART1_IRQ_NUM - -/* - * Here go the bitmasks themselves - */ -#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */ -#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */ -#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ -#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ -#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ -#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ -#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ -#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ -#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ -#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ -#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ -#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ -#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ -#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ -#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ -#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */ -#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */ -#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */ - -/* '328-compatible definitions */ -#define IMR_MSPIM IMR_MSPI -#define IMR_MTMR1 IMR_MTMR - -/* - * Interrupt Status Register - */ -#define ISR_ADDR 0xfffff30c -#define ISR LONG_REF(ISR_ADDR) - -#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ -#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ -#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ -#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ -#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ -#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ - -/* '328-compatible definitions */ -#define ISR_SPIM ISR_SPI -#define ISR_TMR1 ISR_TMR - -/* - * Interrupt Pending Register - */ -#define IPR_ADDR 0xfffff30c -#define IPR LONG_REF(IPR_ADDR) - -#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ -#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ -#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ -#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ -#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ -#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ - -/* '328-compatible definitions */ -#define IPR_SPIM IPR_SPI -#define IPR_TMR1 IPR_TMR - -/********** - * - * 0xFFFFF4xx -- Parallel Ports - * - **********/ - -/* - * Port A - */ -#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ -#define PADATA_ADDR 0xfffff401 /* Port A data register */ -#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */ - -#define PADIR BYTE_REF(PADIR_ADDR) -#define PADATA BYTE_REF(PADATA_ADDR) -#define PAPUEN BYTE_REF(PAPUEN_ADDR) - -#define PA(x) (1 << (x)) - -/* - * Port B - */ -#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ -#define PBDATA_ADDR 0xfffff409 /* Port B data register */ -#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */ -#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ - -#define PBDIR BYTE_REF(PBDIR_ADDR) -#define PBDATA BYTE_REF(PBDATA_ADDR) -#define PBPUEN BYTE_REF(PBPUEN_ADDR) -#define PBSEL BYTE_REF(PBSEL_ADDR) - -#define PB(x) (1 << (x)) - -#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */ -#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */ -#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */ -#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */ -#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */ -#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */ -#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */ -#define PB_PWMO 0x80 /* Use PWMO as PB[7] */ - -/* - * Port C - */ -#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ -#define PCDATA_ADDR 0xfffff411 /* Port C data register */ -#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */ -#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ - -#define PCDIR BYTE_REF(PCDIR_ADDR) -#define PCDATA BYTE_REF(PCDATA_ADDR) -#define PCPDEN BYTE_REF(PCPDEN_ADDR) -#define PCSEL BYTE_REF(PCSEL_ADDR) - -#define PC(x) (1 << (x)) - -#define PC_LD0 0x01 /* Use LD0 as PC[0] */ -#define PC_LD1 0x02 /* Use LD1 as PC[1] */ -#define PC_LD2 0x04 /* Use LD2 as PC[2] */ -#define PC_LD3 0x08 /* Use LD3 as PC[3] */ -#define PC_LFLM 0x10 /* Use LFLM as PC[4] */ -#define PC_LLP 0x20 /* Use LLP as PC[5] */ -#define PC_LCLK 0x40 /* Use LCLK as PC[6] */ -#define PC_LACD 0x80 /* Use LACD as PC[7] */ - -/* - * Port D - */ -#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ -#define PDDATA_ADDR 0xfffff419 /* Port D data register */ -#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ -#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */ -#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ -#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ -#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */ -#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ - -#define PDDIR BYTE_REF(PDDIR_ADDR) -#define PDDATA BYTE_REF(PDDATA_ADDR) -#define PDPUEN BYTE_REF(PDPUEN_ADDR) -#define PDSEL BYTE_REF(PDSEL_ADDR) -#define PDPOL BYTE_REF(PDPOL_ADDR) -#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) -#define PDKBEN BYTE_REF(PDKBEN_ADDR) -#define PDIQEG BYTE_REF(PDIQEG_ADDR) - -#define PD(x) (1 << (x)) - -#define PD_INT0 0x01 /* Use INT0 as PD[0] */ -#define PD_INT1 0x02 /* Use INT1 as PD[1] */ -#define PD_INT2 0x04 /* Use INT2 as PD[2] */ -#define PD_INT3 0x08 /* Use INT3 as PD[3] */ -#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */ -#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */ -#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */ -#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */ - -/* - * Port E - */ -#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ -#define PEDATA_ADDR 0xfffff421 /* Port E data register */ -#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ -#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ - -#define PEDIR BYTE_REF(PEDIR_ADDR) -#define PEDATA BYTE_REF(PEDATA_ADDR) -#define PEPUEN BYTE_REF(PEPUEN_ADDR) -#define PESEL BYTE_REF(PESEL_ADDR) - -#define PE(x) (1 << (x)) - -#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */ -#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */ -#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */ -#define PE_DWE 0x08 /* Use DWE as PE[3] */ -#define PE_RXD 0x10 /* Use RXD as PE[4] */ -#define PE_TXD 0x20 /* Use TXD as PE[5] */ -#define PE_RTS 0x40 /* Use RTS as PE[6] */ -#define PE_CTS 0x80 /* Use CTS as PE[7] */ - -/* - * Port F - */ -#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ -#define PFDATA_ADDR 0xfffff429 /* Port F data register */ -#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ -#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ - -#define PFDIR BYTE_REF(PFDIR_ADDR) -#define PFDATA BYTE_REF(PFDATA_ADDR) -#define PFPUEN BYTE_REF(PFPUEN_ADDR) -#define PFSEL BYTE_REF(PFSEL_ADDR) - -#define PF(x) (1 << (x)) - -#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */ -#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */ -#define PF_CLKO 0x04 /* Use CLKO as PF[2] */ -#define PF_A20 0x08 /* Use A20 as PF[3] */ -#define PF_A21 0x10 /* Use A21 as PF[4] */ -#define PF_A22 0x20 /* Use A22 as PF[5] */ -#define PF_A23 0x40 /* Use A23 as PF[6] */ -#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */ - -/* - * Port G - */ -#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ -#define PGDATA_ADDR 0xfffff431 /* Port G data register */ -#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ -#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ - -#define PGDIR BYTE_REF(PGDIR_ADDR) -#define PGDATA BYTE_REF(PGDATA_ADDR) -#define PGPUEN BYTE_REF(PGPUEN_ADDR) -#define PGSEL BYTE_REF(PGSEL_ADDR) - -#define PG(x) (1 << (x)) - -#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */ -#define PG_A0 0x02 /* Use A0 as PG[1] */ -#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */ -#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */ -#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */ -#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */ - -/* - * Port J - */ -#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ -#define PJDATA_ADDR 0xfffff439 /* Port J data register */ -#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enb. reg */ -#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */ - -#define PJDIR BYTE_REF(PJDIR_ADDR) -#define PJDATA BYTE_REF(PJDATA_ADDR) -#define PJPUEN BYTE_REF(PJPUEN_ADDR) -#define PJSEL BYTE_REF(PJSEL_ADDR) - -#define PJ(x) (1 << (x)) - -/* - * Port K - */ -#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */ -#define PKDATA_ADDR 0xfffff441 /* Port K data register */ -#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enb. reg */ -#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */ - -#define PKDIR BYTE_REF(PKDIR_ADDR) -#define PKDATA BYTE_REF(PKDATA_ADDR) -#define PKPUEN BYTE_REF(PKPUEN_ADDR) -#define PKSEL BYTE_REF(PKSEL_ADDR) - -#define PK(x) (1 << (x)) - -#define PK_DATAREADY 0x01 /* Use ~DATA_READY as PK[0] */ -#define PK_PWM2 0x01 /* Use PWM2 as PK[0] */ -#define PK_R_W 0x02 /* Use R/W as PK[1] */ -#define PK_LDS 0x04 /* Use /LDS as PK[2] */ -#define PK_UDS 0x08 /* Use /UDS as PK[3] */ -#define PK_LD4 0x10 /* Use LD4 as PK[4] */ -#define PK_LD5 0x20 /* Use LD5 as PK[5] */ -#define PK_LD6 0x40 /* Use LD6 as PK[6] */ -#define PK_LD7 0x80 /* Use LD7 as PK[7] */ - -#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ -#define PJDATA_ADDR 0xfffff439 /* Port J data register */ -#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enable reg */ -#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */ - -#define PJDIR BYTE_REF(PJDIR_ADDR) -#define PJDATA BYTE_REF(PJDATA_ADDR) -#define PJPUEN BYTE_REF(PJPUEN_ADDR) -#define PJSEL BYTE_REF(PJSEL_ADDR) - -#define PJ(x) (1 << (x)) - -#define PJ_MOSI 0x01 /* Use MOSI as PJ[0] */ -#define PJ_MISO 0x02 /* Use MISO as PJ[1] */ -#define PJ_SPICLK1 0x04 /* Use SPICLK1 as PJ[2] */ -#define PJ_SS 0x08 /* Use SS as PJ[3] */ -#define PJ_RXD2 0x10 /* Use RXD2 as PJ[4] */ -#define PJ_TXD2 0x20 /* Use TXD2 as PJ[5] */ -#define PJ_RTS2 0x40 /* Use RTS2 as PJ[5] */ -#define PJ_CTS2 0x80 /* Use CTS2 as PJ[5] */ - -/* - * Port M - */ -#define PMDIR_ADDR 0xfffff448 /* Port M direction reg */ -#define PMDATA_ADDR 0xfffff449 /* Port M data register */ -#define PMPUEN_ADDR 0xfffff44a /* Port M Pull-Up enable reg */ -#define PMSEL_ADDR 0xfffff44b /* Port M Select Register */ - -#define PMDIR BYTE_REF(PMDIR_ADDR) -#define PMDATA BYTE_REF(PMDATA_ADDR) -#define PMPUEN BYTE_REF(PMPUEN_ADDR) -#define PMSEL BYTE_REF(PMSEL_ADDR) - -#define PM(x) (1 << (x)) - -#define PM_SDCLK 0x01 /* Use SDCLK as PM[0] */ -#define PM_SDCE 0x02 /* Use SDCE as PM[1] */ -#define PM_DQMH 0x04 /* Use DQMH as PM[2] */ -#define PM_DQML 0x08 /* Use DQML as PM[3] */ -#define PM_SDA10 0x10 /* Use SDA10 as PM[4] */ -#define PM_DMOE 0x20 /* Use DMOE as PM[5] */ - -/********** - * - * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) - * - **********/ - -/* - * PWM Control Register - */ -#define PWMC_ADDR 0xfffff500 -#define PWMC WORD_REF(PWMC_ADDR) - -#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */ -#define PWMC_CLKSEL_SHIFT 0 -#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */ -#define PWMC_REPEAT_SHIFT 2 -#define PWMC_EN 0x0010 /* Enable PWM */ -#define PMNC_FIFOAV 0x0020 /* FIFO Available */ -#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */ -#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */ -#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */ -#define PWMC_PRESCALER_SHIFT 8 -#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ - -/* '328-compatible definitions */ -#define PWMC_PWMEN PWMC_EN - -/* - * PWM Sample Register - */ -#define PWMS_ADDR 0xfffff502 -#define PWMS WORD_REF(PWMS_ADDR) - -/* - * PWM Period Register - */ -#define PWMP_ADDR 0xfffff504 -#define PWMP BYTE_REF(PWMP_ADDR) - -/* - * PWM Counter Register - */ -#define PWMCNT_ADDR 0xfffff505 -#define PWMCNT BYTE_REF(PWMCNT_ADDR) - -/********** - * - * 0xFFFFF6xx -- General-Purpose Timer - * - **********/ - -/* - * Timer Control register - */ -#define TCTL_ADDR 0xfffff600 -#define TCTL WORD_REF(TCTL_ADDR) - -#define TCTL_TEN 0x0001 /* Timer Enable */ -#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ -#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ -#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ -#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ -#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ -#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ -#define TCTL_IRQEN 0x0010 /* IRQ Enable */ -#define TCTL_OM 0x0020 /* Output Mode */ -#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ -#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ -#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ -#define TCTL_FRR 0x0010 /* Free-Run Mode */ - -/* '328-compatible definitions */ -#define TCTL1_ADDR TCTL_ADDR -#define TCTL1 TCTL - -/* - * Timer Prescaler Register - */ -#define TPRER_ADDR 0xfffff602 -#define TPRER WORD_REF(TPRER_ADDR) - -/* '328-compatible definitions */ -#define TPRER1_ADDR TPRER_ADDR -#define TPRER1 TPRER - -/* - * Timer Compare Register - */ -#define TCMP_ADDR 0xfffff604 -#define TCMP WORD_REF(TCMP_ADDR) - -/* '328-compatible definitions */ -#define TCMP1_ADDR TCMP_ADDR -#define TCMP1 TCMP - -/* - * Timer Capture register - */ -#define TCR_ADDR 0xfffff606 -#define TCR WORD_REF(TCR_ADDR) - -/* '328-compatible definitions */ -#define TCR1_ADDR TCR_ADDR -#define TCR1 TCR - -/* - * Timer Counter Register - */ -#define TCN_ADDR 0xfffff608 -#define TCN WORD_REF(TCN_ADDR) - -/* '328-compatible definitions */ -#define TCN1_ADDR TCN_ADDR -#define TCN1 TCN - -/* - * Timer Status Register - */ -#define TSTAT_ADDR 0xfffff60a -#define TSTAT WORD_REF(TSTAT_ADDR) - -#define TSTAT_COMP 0x0001 /* Compare Event occurred */ -#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ - -/* '328-compatible definitions */ -#define TSTAT1_ADDR TSTAT_ADDR -#define TSTAT1 TSTAT - -/********** - * - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) - * - **********/ - -/* - * SPIM Data Register - */ -#define SPIMDATA_ADDR 0xfffff800 -#define SPIMDATA WORD_REF(SPIMDATA_ADDR) - -/* - * SPIM Control/Status Register - */ -#define SPIMCONT_ADDR 0xfffff802 -#define SPIMCONT WORD_REF(SPIMCONT_ADDR) - -#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ -#define SPIMCONT_BIT_COUNT_SHIFT 0 -#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ -#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ -#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ -#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */ -#define SPIMCONT_XCH 0x0100 /* Exchange */ -#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */ -#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ -#define SPIMCONT_DATA_RATE_SHIFT 13 - -/* '328-compatible definitions */ -#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ -#define SPIMCONT_SPIMEN SPIMCONT_ENABLE - -/********** - * - * 0xFFFFF9xx -- UART - * - **********/ - -/* - * UART Status/Control Register - */ - -#define USTCNT_ADDR 0xfffff900 -#define USTCNT WORD_REF(USTCNT_ADDR) - -#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */ -#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */ -#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */ -#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */ -#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */ -#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */ -#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */ -#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */ -#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ -#define USTCNT_STOP 0x0200 /* Stop bit transmission */ -#define USTCNT_ODD 0x0400 /* Odd Parity */ -#define USTCNT_PEN 0x0800 /* Parity Enable */ -#define USTCNT_CLKM 0x1000 /* Clock Mode Select */ -#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ -#define USTCNT_RXEN 0x4000 /* Receiver Enable */ -#define USTCNT_UEN 0x8000 /* UART Enable */ - -/* '328-compatible definitions */ -#define USTCNT_TXAVAILEN USTCNT_TXAE -#define USTCNT_TXHALFEN USTCNT_TXHE -#define USTCNT_TXEMPTYEN USTCNT_TXEE -#define USTCNT_RXREADYEN USTCNT_RXRE -#define USTCNT_RXHALFEN USTCNT_RXHE -#define USTCNT_RXFULLEN USTCNT_RXFE -#define USTCNT_CTSDELTAEN USTCNT_CTSD -#define USTCNT_ODD_EVEN USTCNT_ODD -#define USTCNT_PARITYEN USTCNT_PEN -#define USTCNT_CLKMODE USTCNT_CLKM -#define USTCNT_UARTEN USTCNT_UEN - -/* - * UART Baud Control Register - */ -#define UBAUD_ADDR 0xfffff902 -#define UBAUD WORD_REF(UBAUD_ADDR) - -#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ -#define UBAUD_PRESCALER_SHIFT 0 -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ -#define UBAUD_DIVIDE_SHIFT 8 -#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ -#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */ - -/* - * UART Receiver Register - */ -#define URX_ADDR 0xfffff904 -#define URX WORD_REF(URX_ADDR) - -#define URX_RXDATA_ADDR 0xfffff905 -#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) - -#define URX_RXDATA_MASK 0x00ff /* Received data */ -#define URX_RXDATA_SHIFT 0 -#define URX_PARITY_ERROR 0x0100 /* Parity Error */ -#define URX_BREAK 0x0200 /* Break Detected */ -#define URX_FRAME_ERROR 0x0400 /* Framing Error */ -#define URX_OVRUN 0x0800 /* Serial Overrun */ -#define URX_OLD_DATA 0x1000 /* Old data in FIFO */ -#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ -#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ -#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ - -/* - * UART Transmitter Register - */ -#define UTX_ADDR 0xfffff906 -#define UTX WORD_REF(UTX_ADDR) - -#define UTX_TXDATA_ADDR 0xfffff907 -#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) - -#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ -#define UTX_TXDATA_SHIFT 0 -#define UTX_CTS_DELTA 0x0100 /* CTS changed */ -#define UTX_CTS_STAT 0x0200 /* CTS State */ -#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */ -#define UTX_NOCTS 0x0800 /* Ignore CTS */ -#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ -#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ -#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ -#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ - -/* '328-compatible definitions */ -#define UTX_CTS_STATUS UTX_CTS_STAT -#define UTX_IGNORE_CTS UTX_NOCTS - -/* - * UART Miscellaneous Register - */ -#define UMISC_ADDR 0xfffff908 -#define UMISC WORD_REF(UMISC_ADDR) - -#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ -#define UMISC_RX_POL 0x0008 /* Receive Polarity */ -#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ -#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ -#define UMISC_RTS 0x0040 /* Set RTS status */ -#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ -#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */ -#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */ -#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ -#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ -#define UMISC_CLKSRC 0x4000 /* Clock Source */ -#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */ - -/* - * UART Non-integer Prescaler Register - */ -#define NIPR_ADDR 0xfffff90a -#define NIPR WORD_REF(NIPR_ADDR) - -#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */ -#define NIPR_STEP_VALUE_SHIFT 0 -#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */ -#define NIPR_SELECT_SHIFT 8 -#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */ - - -/* generalization of uart control registers to support multiple ports: */ -typedef struct { - volatile unsigned short int ustcnt; - volatile unsigned short int ubaud; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char rxdata; - } b; - } urx; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char txdata; - } b; - } utx; - volatile unsigned short int umisc; - volatile unsigned short int nipr; - volatile unsigned short int hmark; - volatile unsigned short int unused; -} __attribute__((packed)) m68328_uart; - - - - -/********** - * - * 0xFFFFFAxx -- LCD Controller - * - **********/ - -/* - * LCD Screen Starting Address Register - */ -#define LSSA_ADDR 0xfffffa00 -#define LSSA LONG_REF(LSSA_ADDR) - -#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */ - -/* - * LCD Virtual Page Width Register - */ -#define LVPW_ADDR 0xfffffa05 -#define LVPW BYTE_REF(LVPW_ADDR) - -/* - * LCD Screen Width Register (not compatible with '328 !!!) - */ -#define LXMAX_ADDR 0xfffffa08 -#define LXMAX WORD_REF(LXMAX_ADDR) - -#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */ - -/* - * LCD Screen Height Register - */ -#define LYMAX_ADDR 0xfffffa0a -#define LYMAX WORD_REF(LYMAX_ADDR) - -#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */ - -/* - * LCD Cursor X Position Register - */ -#define LCXP_ADDR 0xfffffa18 -#define LCXP WORD_REF(LCXP_ADDR) - -#define LCXP_CC_MASK 0xc000 /* Cursor Control */ -#define LCXP_CC_TRAMSPARENT 0x0000 -#define LCXP_CC_BLACK 0x4000 -#define LCXP_CC_REVERSED 0x8000 -#define LCXP_CC_WHITE 0xc000 -#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ - -/* - * LCD Cursor Y Position Register - */ -#define LCYP_ADDR 0xfffffa1a -#define LCYP WORD_REF(LCYP_ADDR) - -#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ - -/* - * LCD Cursor Width and Heigth Register - */ -#define LCWCH_ADDR 0xfffffa1c -#define LCWCH WORD_REF(LCWCH_ADDR) - -#define LCWCH_CH_MASK 0x001f /* Cursor Height */ -#define LCWCH_CH_SHIFT 0 -#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ -#define LCWCH_CW_SHIFT 8 - -/* - * LCD Blink Control Register - */ -#define LBLKC_ADDR 0xfffffa1f -#define LBLKC BYTE_REF(LBLKC_ADDR) - -#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ -#define LBLKC_BD_SHIFT 0 -#define LBLKC_BKEN 0x80 /* Blink Enabled */ - -/* - * LCD Panel Interface Configuration Register - */ -#define LPICF_ADDR 0xfffffa20 -#define LPICF BYTE_REF(LPICF_ADDR) - -#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */ -#define LPICF_GS_BW 0x00 -#define LPICF_GS_GRAY_4 0x01 -#define LPICF_GS_GRAY_16 0x02 -#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */ -#define LPICF_PBSIZ_1 0x00 -#define LPICF_PBSIZ_2 0x04 -#define LPICF_PBSIZ_4 0x08 - -/* - * LCD Polarity Configuration Register - */ -#define LPOLCF_ADDR 0xfffffa21 -#define LPOLCF BYTE_REF(LPOLCF_ADDR) - -#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ -#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ -#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ -#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ - -/* - * LACD (LCD Alternate Crystal Direction) Rate Control Register - */ -#define LACDRC_ADDR 0xfffffa23 -#define LACDRC BYTE_REF(LACDRC_ADDR) - -#define LACDRC_ACDSLT 0x80 /* Signal Source Select */ -#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ -#define LACDRC_ACD_SHIFT 0 - -/* - * LCD Pixel Clock Divider Register - */ -#define LPXCD_ADDR 0xfffffa25 -#define LPXCD BYTE_REF(LPXCD_ADDR) - -#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ -#define LPXCD_PCD_SHIFT 0 - -/* - * LCD Clocking Control Register - */ -#define LCKCON_ADDR 0xfffffa27 -#define LCKCON BYTE_REF(LCKCON_ADDR) - -#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */ -#define LCKCON_DWS_SHIFT 0 -#define LCKCON_DWIDTH 0x40 /* Display Memory Width */ -#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ - -/* '328-compatible definitions */ -#define LCKCON_DW_MASK LCKCON_DWS_MASK -#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT - -/* - * LCD Refresh Rate Adjustment Register - */ -#define LRRA_ADDR 0xfffffa29 -#define LRRA BYTE_REF(LRRA_ADDR) - -/* - * LCD Panning Offset Register - */ -#define LPOSR_ADDR 0xfffffa2d -#define LPOSR BYTE_REF(LPOSR_ADDR) - -#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */ -#define LPOSR_POS_SHIFT 0 - -/* - * LCD Frame Rate Control Modulation Register - */ -#define LFRCM_ADDR 0xfffffa31 -#define LFRCM BYTE_REF(LFRCM_ADDR) - -#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ -#define LFRCM_YMOD_SHIFT 0 -#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ -#define LFRCM_XMOD_SHIFT 4 - -/* - * LCD Gray Palette Mapping Register - */ -#define LGPMR_ADDR 0xfffffa33 -#define LGPMR BYTE_REF(LGPMR_ADDR) - -#define LGPMR_G1_MASK 0x0f -#define LGPMR_G1_SHIFT 0 -#define LGPMR_G2_MASK 0xf0 -#define LGPMR_G2_SHIFT 4 - -/* - * PWM Contrast Control Register - */ -#define PWMR_ADDR 0xfffffa36 -#define PWMR WORD_REF(PWMR_ADDR) - -#define PWMR_PW_MASK 0x00ff /* Pulse Width */ -#define PWMR_PW_SHIFT 0 -#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */ -#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */ -#define PWMR_SRC_LINE 0x0000 /* Line Pulse */ -#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */ -#define PWMR_SRC_LCD 0x4000 /* LCD clock */ - -/********** - * - * 0xFFFFFBxx -- Real-Time Clock (RTC) - * - **********/ - -/* - * RTC Hours Minutes and Seconds Register - */ -#define RTCTIME_ADDR 0xfffffb00 -#define RTCTIME LONG_REF(RTCTIME_ADDR) - -#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCTIME_SECONDS_SHIFT 0 -#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCTIME_MINUTES_SHIFT 16 -#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCTIME_HOURS_SHIFT 24 - -/* - * RTC Alarm Register - */ -#define RTCALRM_ADDR 0xfffffb04 -#define RTCALRM LONG_REF(RTCALRM_ADDR) - -#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCALRM_SECONDS_SHIFT 0 -#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCALRM_MINUTES_SHIFT 16 -#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCALRM_HOURS_SHIFT 24 - -/* - * Watchdog Timer Register - */ -#define WATCHDOG_ADDR 0xfffffb0a -#define WATCHDOG WORD_REF(WATCHDOG_ADDR) - -#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */ -#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */ -#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */ -#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */ -#define WATCHDOG_CNT_SHIFT 8 - -/* - * RTC Control Register - */ -#define RTCCTL_ADDR 0xfffffb0c -#define RTCCTL WORD_REF(RTCCTL_ADDR) - -#define RTCCTL_XTL 0x0020 /* Crystal Selection */ -#define RTCCTL_EN 0x0080 /* RTC Enable */ - -/* '328-compatible definitions */ -#define RTCCTL_384 RTCCTL_XTL -#define RTCCTL_ENABLE RTCCTL_EN - -/* - * RTC Interrupt Status Register - */ -#define RTCISR_ADDR 0xfffffb0e -#define RTCISR WORD_REF(RTCISR_ADDR) - -#define RTCISR_SW 0x0001 /* Stopwatch timed out */ -#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ -#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ -#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ -#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ -#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */ -#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */ -#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */ -#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */ -#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */ -#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */ -#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */ -#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */ -#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */ - -/* - * RTC Interrupt Enable Register - */ -#define RTCIENR_ADDR 0xfffffb10 -#define RTCIENR WORD_REF(RTCIENR_ADDR) - -#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ -#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ -#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ -#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ -#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ -#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */ -#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */ -#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */ -#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */ -#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */ -#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */ -#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */ -#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */ -#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */ - -/* - * Stopwatch Minutes Register - */ -#define STPWCH_ADDR 0xfffffb12 -#define STPWCH WORD_REF(STPWCH_ADDR) - -#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */ -#define SPTWCH_CNT_SHIFT 0 - -/* - * RTC Day Count Register - */ -#define DAYR_ADDR 0xfffffb1a -#define DAYR WORD_REF(DAYR_ADDR) - -#define DAYR_DAYS_MASK 0x1ff /* Day Setting */ -#define DAYR_DAYS_SHIFT 0 - -/* - * RTC Day Alarm Register - */ -#define DAYALARM_ADDR 0xfffffb1c -#define DAYALARM WORD_REF(DAYALARM_ADDR) - -#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */ -#define DAYALARM_DAYSAL_SHIFT 0 - -/********** - * - * 0xFFFFFCxx -- DRAM Controller - * - **********/ - -/* - * DRAM Memory Configuration Register - */ -#define DRAMMC_ADDR 0xfffffc00 -#define DRAMMC WORD_REF(DRAMMC_ADDR) - -#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */ -#define DRAMMC_ROW12_PA10 0x0000 -#define DRAMMC_ROW12_PA21 0x4000 -#define DRAMMC_ROW12_PA23 0x8000 -#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */ -#define DRAMMC_ROW0_PA11 0x0000 -#define DRAMMC_ROW0_PA22 0x1000 -#define DRAMMC_ROW0_PA23 0x2000 -#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */ -#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */ -#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */ -#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */ -#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */ -#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */ -#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */ -#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */ -#define DRAMMC_REF_SHIFT 0 - -/* - * DRAM Control Register - */ -#define DRAMC_ADDR 0xfffffc02 -#define DRAMC WORD_REF(DRAMC_ADDR) - -#define DRAMC_DWE 0x0001 /* DRAM Write Enable */ -#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */ -#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */ -#define DRAMC_SLW 0x0008 /* Slow RAM */ -#define DRAMC_LSP 0x0010 /* Light Sleep */ -#define DRAMC_MSW 0x0020 /* Slow Multiplexing */ -#define DRAMC_WS_MASK 0x00c0 /* Wait-states */ -#define DRAMC_WS_SHIFT 6 -#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */ -#define DRAMC_PGSZ_SHIFT 8 -#define DRAMC_PGSZ_256K 0x0000 -#define DRAMC_PGSZ_512K 0x0100 -#define DRAMC_PGSZ_1024K 0x0200 -#define DRAMC_PGSZ_2048K 0x0300 -#define DRAMC_EDO 0x0400 /* EDO DRAM */ -#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */ -#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */ -#define DRAMC_BC_SHIFT 12 -#define DRAMC_RM 0x4000 /* Refresh Mode */ -#define DRAMC_EN 0x8000 /* DRAM Controller enable */ - - -/********** - * - * 0xFFFFFDxx -- In-Circuit Emulation (ICE) - * - **********/ - -/* - * ICE Module Address Compare Register - */ -#define ICEMACR_ADDR 0xfffffd00 -#define ICEMACR LONG_REF(ICEMACR_ADDR) - -/* - * ICE Module Address Mask Register - */ -#define ICEMAMR_ADDR 0xfffffd04 -#define ICEMAMR LONG_REF(ICEMAMR_ADDR) - -/* - * ICE Module Control Compare Register - */ -#define ICEMCCR_ADDR 0xfffffd08 -#define ICEMCCR WORD_REF(ICEMCCR_ADDR) - -#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */ -#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */ - -/* - * ICE Module Control Mask Register - */ -#define ICEMCMR_ADDR 0xfffffd0a -#define ICEMCMR WORD_REF(ICEMCMR_ADDR) - -#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */ -#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */ - -/* - * ICE Module Control Register - */ -#define ICEMCR_ADDR 0xfffffd0c -#define ICEMCR WORD_REF(ICEMCR_ADDR) - -#define ICEMCR_CEN 0x0001 /* Compare Enable */ -#define ICEMCR_PBEN 0x0002 /* Program Break Enable */ -#define ICEMCR_SB 0x0004 /* Single Breakpoint */ -#define ICEMCR_HMDIS 0x0008 /* HardMap disable */ -#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */ - -/* - * ICE Module Status Register - */ -#define ICEMSR_ADDR 0xfffffd0e -#define ICEMSR WORD_REF(ICEMSR_ADDR) - -#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */ -#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */ -#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */ -#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */ - -#endif /* _MC68VZ328_H_ */ diff --git a/include/asm-m68knommu/a.out.h b/include/asm-m68knommu/a.out.h deleted file mode 100644 index ce18ef99de04..000000000000 --- a/include/asm-m68knommu/a.out.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/anchor.h b/include/asm-m68knommu/anchor.h deleted file mode 100644 index 871c0d5cfc3d..000000000000 --- a/include/asm-m68knommu/anchor.h +++ /dev/null @@ -1,112 +0,0 @@ -/****************************************************************************/ - -/* - * anchor.h -- Anchor CO-MEM Lite PCI host bridge part. - * - * (C) Copyright 2000, Moreton Bay (www.moreton.com.au) - */ - -/****************************************************************************/ -#ifndef anchor_h -#define anchor_h -/****************************************************************************/ - -/* - * Define basic addressing info. - */ -#if defined(CONFIG_M5407C3) -#define COMEM_BASE 0xFFFF0000 /* Base of CO-MEM address space */ -#define COMEM_IRQ 25 /* IRQ of anchor part */ -#else -#define COMEM_BASE 0x80000000 /* Base of CO-MEM address space */ -#define COMEM_IRQ 25 /* IRQ of anchor part */ -#endif - -/****************************************************************************/ - -/* - * 4-byte registers of CO-MEM, so adjust register addresses for - * easy access. Handy macro for word access too. - */ -#define LREG(a) ((a) >> 2) -#define WREG(a) ((a) >> 1) - - -/* - * Define base addresses within CO-MEM Lite register address space. - */ -#define COMEM_I2O 0x0000 /* I2O registers */ -#define COMEM_OPREGS 0x0400 /* Operation registers */ -#define COMEM_PCIBUS 0x2000 /* Direct access to PCI bus */ -#define COMEM_SHMEM 0x4000 /* Shared memory region */ - -#define COMEM_SHMEMSIZE 0x4000 /* Size of shared memory */ - - -/* - * Define CO-MEM Registers. - */ -#define COMEM_I2OHISR 0x0030 /* I2O host interrupt status */ -#define COMEM_I2OHIMR 0x0034 /* I2O host interrupt mask */ -#define COMEM_I2OLISR 0x0038 /* I2O local interrupt status */ -#define COMEM_I2OLIMR 0x003c /* I2O local interrupt mask */ -#define COMEM_IBFPFIFO 0x0040 /* I2O inbound free/post FIFO */ -#define COMEM_OBPFFIFO 0x0044 /* I2O outbound post/free FIFO */ -#define COMEM_IBPFFIFO 0x0048 /* I2O inbound post/free FIFO */ -#define COMEM_OBFPFIFO 0x004c /* I2O outbound free/post FIFO */ - -#define COMEM_DAHBASE 0x0460 /* Direct access base address */ - -#define COMEM_NVCMD 0x04a0 /* I2C serial command */ -#define COMEM_NVREAD 0x04a4 /* I2C serial read */ -#define COMEM_NVSTAT 0x04a8 /* I2C status */ - -#define COMEM_DMALBASE 0x04b0 /* DMA local base address */ -#define COMEM_DMAHBASE 0x04b4 /* DMA host base address */ -#define COMEM_DMASIZE 0x04b8 /* DMA size */ -#define COMEM_DMACTL 0x04bc /* DMA control */ - -#define COMEM_HCTL 0x04e0 /* Host control */ -#define COMEM_HINT 0x04e4 /* Host interrupt control/status */ -#define COMEM_HLDATA 0x04e8 /* Host to local data mailbox */ -#define COMEM_LINT 0x04f4 /* Local interrupt contole status */ -#define COMEM_LHDATA 0x04f8 /* Local to host data mailbox */ - -#define COMEM_LBUSCFG 0x04fc /* Local bus configuration */ - - -/* - * Commands and flags for use with Direct Access Register. - */ -#define COMEM_DA_IACK 0x00000000 /* Interrupt acknowledge (read) */ -#define COMEM_DA_SPCL 0x00000010 /* Special cycle (write) */ -#define COMEM_DA_MEMRD 0x00000004 /* Memory read cycle */ -#define COMEM_DA_MEMWR 0x00000004 /* Memory write cycle */ -#define COMEM_DA_IORD 0x00000002 /* I/O read cycle */ -#define COMEM_DA_IOWR 0x00000002 /* I/O write cycle */ -#define COMEM_DA_CFGRD 0x00000006 /* Configuration read cycle */ -#define COMEM_DA_CFGWR 0x00000006 /* Configuration write cycle */ - -#define COMEM_DA_ADDR(a) ((a) & 0xffffe000) - -#define COMEM_DA_OFFSET(a) ((a) & 0x00001fff) - - -/* - * The PCI bus will be limited in what slots will actually be used. - * Define valid device numbers for different boards. - */ -#if defined(CONFIG_M5407C3) -#define COMEM_MINDEV 14 /* Minimum valid DEVICE */ -#define COMEM_MAXDEV 14 /* Maximum valid DEVICE */ -#define COMEM_BRIDGEDEV 15 /* Slot bridge is in */ -#else -#define COMEM_MINDEV 0 /* Minimum valid DEVICE */ -#define COMEM_MAXDEV 3 /* Maximum valid DEVICE */ -#endif - -#define COMEM_MAXPCI (COMEM_MAXDEV+1) /* Maximum PCI devices */ - - -/****************************************************************************/ -#endif /* anchor_h */ diff --git a/include/asm-m68knommu/atomic.h b/include/asm-m68knommu/atomic.h deleted file mode 100644 index d5632a305dae..000000000000 --- a/include/asm-m68knommu/atomic.h +++ /dev/null @@ -1,155 +0,0 @@ -#ifndef __ARCH_M68KNOMMU_ATOMIC__ -#define __ARCH_M68KNOMMU_ATOMIC__ - -#include - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - */ - -/* - * We do not have SMP m68k systems, so we don't have to deal with that. - */ - -typedef struct { int counter; } atomic_t; -#define ATOMIC_INIT(i) { (i) } - -#define atomic_read(v) ((v)->counter) -#define atomic_set(v, i) (((v)->counter) = i) - -static __inline__ void atomic_add(int i, atomic_t *v) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i)); -#else - __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i)); -#endif -} - -static __inline__ void atomic_sub(int i, atomic_t *v) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i)); -#else - __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i)); -#endif -} - -static __inline__ int atomic_sub_and_test(int i, atomic_t * v) -{ - char c; -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__("subl %2,%1; seq %0" - : "=d" (c), "+m" (*v) - : "d" (i)); -#else - __asm__ __volatile__("subl %2,%1; seq %0" - : "=d" (c), "+m" (*v) - : "di" (i)); -#endif - return c != 0; -} - -static __inline__ void atomic_inc(volatile atomic_t *v) -{ - __asm__ __volatile__("addql #1,%0" : "+m" (*v)); -} - -/* - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ - -static __inline__ int atomic_inc_and_test(volatile atomic_t *v) -{ - char c; - __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v)); - return c != 0; -} - -static __inline__ void atomic_dec(volatile atomic_t *v) -{ - __asm__ __volatile__("subql #1,%0" : "+m" (*v)); -} - -static __inline__ int atomic_dec_and_test(volatile atomic_t *v) -{ - char c; - __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v)); - return c != 0; -} - -static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v) -{ - __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask))); -} - -static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v) -{ - __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask)); -} - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -static inline int atomic_add_return(int i, atomic_t * v) -{ - unsigned long temp, flags; - - local_irq_save(flags); - temp = *(long *)v; - temp += i; - *(long *)v = temp; - local_irq_restore(flags); - - return temp; -} - -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) - -static inline int atomic_sub_return(int i, atomic_t * v) -{ - unsigned long temp, flags; - - local_irq_save(flags); - temp = *(long *)v; - temp -= i; - *(long *)v = temp; - local_irq_restore(flags); - - return temp; -} - -#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - c = atomic_read(v); - for (;;) { - if (unlikely(c == (u))) - break; - old = atomic_cmpxchg((v), c, c + (a)); - if (likely(old == c)) - break; - c = old; - } - return c != (u); -} - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -#define atomic_dec_return(v) atomic_sub_return(1,(v)) -#define atomic_inc_return(v) atomic_add_return(1,(v)) - -#include -#endif /* __ARCH_M68KNOMMU_ATOMIC __ */ diff --git a/include/asm-m68knommu/auxvec.h b/include/asm-m68knommu/auxvec.h deleted file mode 100644 index 844d6d52204b..000000000000 --- a/include/asm-m68knommu/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMm68k_AUXVEC_H -#define __ASMm68k_AUXVEC_H - -#endif diff --git a/include/asm-m68knommu/bitops.h b/include/asm-m68knommu/bitops.h deleted file mode 100644 index 6f3685eab44c..000000000000 --- a/include/asm-m68knommu/bitops.h +++ /dev/null @@ -1,336 +0,0 @@ -#ifndef _M68KNOMMU_BITOPS_H -#define _M68KNOMMU_BITOPS_H - -/* - * Copyright 1992, Linus Torvalds. - */ - -#include -#include /* swab32 */ - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#if defined (__mcfisaaplus__) || defined (__mcfisac__) -static inline int ffs(unsigned int val) -{ - if (!val) - return 0; - - asm volatile( - "bitrev %0\n\t" - "ff1 %0\n\t" - : "=d" (val) - : "0" (val) - ); - val++; - return val; -} - -static inline int __ffs(unsigned int val) -{ - asm volatile( - "bitrev %0\n\t" - "ff1 %0\n\t" - : "=d" (val) - : "0" (val) - ); - return val; -} - -#else -#include -#include -#endif - -#include -#include - -static __inline__ void set_bit(int nr, volatile unsigned long * addr) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0", "cc"); -#else - __asm__ __volatile__ ("bset %1,%0" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - : "cc"); -#endif -} - -#define __set_bit(nr, addr) set_bit(nr, addr) - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -static __inline__ void clear_bit(int nr, volatile unsigned long * addr) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0", "cc"); -#else - __asm__ __volatile__ ("bclr %1,%0" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - : "cc"); -#endif -} - -#define __clear_bit(nr, addr) clear_bit(nr, addr) - -static __inline__ void change_bit(int nr, volatile unsigned long * addr) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0", "cc"); -#else - __asm__ __volatile__ ("bchg %1,%0" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - : "cc"); -#endif -} - -#define __change_bit(nr, addr) change_bit(nr, addr) - -static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bset %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr) - -static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bclr %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr) - -static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bchg %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr) - -/* - * This routine doesn't need to be atomic. - */ -static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr) -{ - return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0; -} - -static __inline__ int __test_bit(int nr, const volatile unsigned long * addr) -{ - int * a = (int *) addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - return ((mask & *a) != 0); -} - -#define test_bit(nr,addr) \ -(__builtin_constant_p(nr) ? \ - __constant_test_bit((nr),(addr)) : \ - __test_bit((nr),(addr))) - -#include -#include -#include - -static __inline__ int ext2_set_bit(int nr, volatile void * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bset %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -static __inline__ int ext2_clear_bit(int nr, volatile void * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bclr %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define ext2_set_bit_atomic(lock, nr, addr) \ - ({ \ - int ret; \ - spin_lock(lock); \ - ret = ext2_set_bit((nr), (addr)); \ - spin_unlock(lock); \ - ret; \ - }) - -#define ext2_clear_bit_atomic(lock, nr, addr) \ - ({ \ - int ret; \ - spin_lock(lock); \ - ret = ext2_clear_bit((nr), (addr)); \ - spin_unlock(lock); \ - ret; \ - }) - -static __inline__ int ext2_test_bit(int nr, const volatile void * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0" - : "=d" (retval) - : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("btst %2,%1; sne %0" - : "=d" (retval) - : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define ext2_find_first_zero_bit(addr, size) \ - ext2_find_next_zero_bit((addr), (size), 0) - -static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset) -{ - unsigned long *p = ((unsigned long *) addr) + (offset >> 5); - unsigned long result = offset & ~31UL; - unsigned long tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 31UL; - if(offset) { - /* We hold the little endian value in tmp, but then the - * shift is illegal. So we could keep a big endian value - * in tmp, like this: - * - * tmp = __swab32(*(p++)); - * tmp |= ~0UL >> (32-offset); - * - * but this would decrease performance, so we change the - * shift: - */ - tmp = *(p++); - tmp |= __swab32(~0UL >> (32-offset)); - if(size < 32) - goto found_first; - if(~tmp) - goto found_middle; - size -= 32; - result += 32; - } - while(size & ~31UL) { - if(~(tmp = *(p++))) - goto found_middle; - result += 32; - size -= 32; - } - if(!size) - return result; - tmp = *p; - -found_first: - /* tmp is little endian, so we would have to swab the shift, - * see above. But then we have to swab tmp below for ffz, so - * we might as well do this here. - */ - return result + ffz(__swab32(tmp) | (~0UL << size)); -found_middle: - return result + ffz(__swab32(tmp)); -} - -#define ext2_find_next_bit(addr, size, off) \ - generic_find_next_le_bit((unsigned long *)(addr), (size), (off)) -#include - -#endif /* __KERNEL__ */ - -#include -#include - -#endif /* _M68KNOMMU_BITOPS_H */ diff --git a/include/asm-m68knommu/bootinfo.h b/include/asm-m68knommu/bootinfo.h deleted file mode 100644 index c12e526f5189..000000000000 --- a/include/asm-m68knommu/bootinfo.h +++ /dev/null @@ -1,2 +0,0 @@ - -/* Nothing for m68knommu */ diff --git a/include/asm-m68knommu/bootstd.h b/include/asm-m68knommu/bootstd.h deleted file mode 100644 index bdc1a4ac4fe9..000000000000 --- a/include/asm-m68knommu/bootstd.h +++ /dev/null @@ -1,132 +0,0 @@ -/* bootstd.h: Bootloader system call interface - * - * (c) 1999, Rt-Control, Inc. - */ - -#ifndef __BOOTSTD_H__ -#define __BOOTSTD_H__ - -#define NR_BSC 21 /* last used bootloader system call */ - -#define __BN_reset 0 /* reset and start the bootloader */ -#define __BN_test 1 /* tests the system call interface */ -#define __BN_exec 2 /* executes a bootloader image */ -#define __BN_exit 3 /* terminates a bootloader image */ -#define __BN_program 4 /* program FLASH from a chain */ -#define __BN_erase 5 /* erase sector(s) of FLASH */ -#define __BN_open 6 -#define __BN_write 7 -#define __BN_read 8 -#define __BN_close 9 -#define __BN_mmap 10 /* map a file descriptor into memory */ -#define __BN_munmap 11 /* remove a file to memory mapping */ -#define __BN_gethwaddr 12 /* get the hardware address of my interfaces */ -#define __BN_getserialnum 13 /* get the serial number of this board */ -#define __BN_getbenv 14 /* get a bootloader envvar */ -#define __BN_setbenv 15 /* get a bootloader envvar */ -#define __BN_setpmask 16 /* set the protection mask */ -#define __BN_readenv 17 /* read environment variables */ -#define __BN_flash_chattr_range 18 -#define __BN_flash_erase_range 19 -#define __BN_flash_write_range 20 - -/* Calling conventions compatible to (uC)linux/68k - * We use simmilar macros to call into the bootloader as for uClinux - */ - -#define __bsc_return(type, res) \ -do { \ - if ((unsigned long)(res) >= (unsigned long)(-64)) { \ - /* let errno be a function, preserve res in %d0 */ \ - int __err = -(res); \ - errno = __err; \ - res = -1; \ - } \ - return (type)(res); \ -} while (0) - -#define _bsc0(type,name) \ -type name(void) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res) \ - ); \ - __bsc_return(type,__res); \ -} - -#define _bsc1(type,name,atype,a) \ -type name(atype a) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - register long __a __asm__ ("%d1") = (long)a; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res), "d" (__a) \ - ); \ - __bsc_return(type,__res); \ -} - -#define _bsc2(type,name,atype,a,btype,b) \ -type name(atype a, btype b) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - register long __a __asm__ ("%d1") = (long)a; \ - register long __b __asm__ ("%d2") = (long)b; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res), "d" (__a), "d" (__b) \ - ); \ - __bsc_return(type,__res); \ -} - -#define _bsc3(type,name,atype,a,btype,b,ctype,c) \ -type name(atype a, btype b, ctype c) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - register long __a __asm__ ("%d1") = (long)a; \ - register long __b __asm__ ("%d2") = (long)b; \ - register long __c __asm__ ("%d3") = (long)c; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res), "d" (__a), "d" (__b), \ - "d" (__c) \ - ); \ - __bsc_return(type,__res); \ -} - -#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \ -type name(atype a, btype b, ctype c, dtype d) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - register long __a __asm__ ("%d1") = (long)a; \ - register long __b __asm__ ("%d2") = (long)b; \ - register long __c __asm__ ("%d3") = (long)c; \ - register long __d __asm__ ("%d4") = (long)d; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res), "d" (__a), "d" (__b), \ - "d" (__c), "d" (__d) \ - ); \ - __bsc_return(type,__res); \ -} - -#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \ -type name(atype a, btype b, ctype c, dtype d, etype e) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - register long __a __asm__ ("%d1") = (long)a; \ - register long __b __asm__ ("%d2") = (long)b; \ - register long __c __asm__ ("%d3") = (long)c; \ - register long __d __asm__ ("%d4") = (long)d; \ - register long __e __asm__ ("%d5") = (long)e; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res), "d" (__a), "d" (__b), \ - "d" (__c), "d" (__d), "d" (__e) \ - ); \ - __bsc_return(type,__res); \ -} - -#endif /* __BOOTSTD_H__ */ diff --git a/include/asm-m68knommu/bug.h b/include/asm-m68knommu/bug.h deleted file mode 100644 index 70e7dc0af21a..000000000000 --- a/include/asm-m68knommu/bug.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _M68KNOMMU_BUG_H -#define _M68KNOMMU_BUG_H -#include -#endif diff --git a/include/asm-m68knommu/bugs.h b/include/asm-m68knommu/bugs.h deleted file mode 100644 index 5f382dac3a60..000000000000 --- a/include/asm-m68knommu/bugs.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-m68k/bugs.h - * - * Copyright (C) 1994 Linus Torvalds - */ - -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - */ - -static void check_bugs(void) -{ -} diff --git a/include/asm-m68knommu/byteorder.h b/include/asm-m68knommu/byteorder.h deleted file mode 100644 index 20bb4426b610..000000000000 --- a/include/asm-m68knommu/byteorder.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _M68KNOMMU_BYTEORDER_H -#define _M68KNOMMU_BYTEORDER_H - -#include - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#if defined (__mcfisaaplus__) || defined (__mcfisac__) -static inline __attribute_const__ __u32 ___arch__swab32(__u32 val) -{ - asm( - "byterev %0" - : "=d" (val) - : "0" (val) - ); - return val; -} - -#define __arch__swab32(x) ___arch__swab32(x) -#endif - -#include - -#endif /* _M68KNOMMU_BYTEORDER_H */ diff --git a/include/asm-m68knommu/cache.h b/include/asm-m68knommu/cache.h deleted file mode 100644 index 24e9eace5f8c..000000000000 --- a/include/asm-m68knommu/cache.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __ARCH_M68KNOMMU_CACHE_H -#define __ARCH_M68KNOMMU_CACHE_H - -/* bytes per L1 cache line */ -#define L1_CACHE_BYTES 16 /* this need to be at least 1 */ - -/* m68k-elf-gcc 2.95.2 doesn't like these */ - -#define __cacheline_aligned -#define ____cacheline_aligned - -#endif diff --git a/include/asm-m68knommu/cachectl.h b/include/asm-m68knommu/cachectl.h deleted file mode 100644 index bcf5a6a9dd52..000000000000 --- a/include/asm-m68knommu/cachectl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/cacheflush.h b/include/asm-m68knommu/cacheflush.h deleted file mode 100644 index 87e5dc0413b4..000000000000 --- a/include/asm-m68knommu/cacheflush.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef _M68KNOMMU_CACHEFLUSH_H -#define _M68KNOMMU_CACHEFLUSH_H - -/* - * (C) Copyright 2000-2004, Greg Ungerer - */ -#include - -#define flush_cache_all() __flush_cache_all() -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) __flush_cache_all() -#define flush_cache_page(vma, vmaddr) do { } while (0) -#define flush_dcache_range(start,len) __flush_cache_all() -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_range(start,len) __flush_cache_all() -#define flush_icache_page(vma,pg) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -static inline void __flush_cache_all(void) -{ -#ifdef CONFIG_M5407 - /* - * Use cpushl to push and invalidate all cache lines. - * Gas doesn't seem to know how to generate the ColdFire - * cpushl instruction... Oh well, bit stuff it for now. - */ - __asm__ __volatile__ ( - "nop\n\t" - "clrl %%d0\n\t" - "1:\n\t" - "movel %%d0,%%a0\n\t" - "2:\n\t" - ".word 0xf468\n\t" - "addl #0x10,%%a0\n\t" - "cmpl #0x00000800,%%a0\n\t" - "blt 2b\n\t" - "addql #1,%%d0\n\t" - "cmpil #4,%%d0\n\t" - "bne 1b\n\t" - "movel #0xb6088500,%%d0\n\t" - "movec %%d0,%%CACR\n\t" - : : : "d0", "a0" ); -#endif /* CONFIG_M5407 */ -#if defined(CONFIG_M527x) || defined(CONFIG_M528x) - __asm__ __volatile__ ( - "movel #0x81000200, %%d0\n\t" - "movec %%d0, %%CACR\n\t" - "nop\n\t" - : : : "d0" ); -#endif /* CONFIG_M527x || CONFIG_M528x */ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272) - __asm__ __volatile__ ( - "movel #0x81000100, %%d0\n\t" - "movec %%d0, %%CACR\n\t" - "nop\n\t" - : : : "d0" ); -#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */ -#ifdef CONFIG_M5249 - __asm__ __volatile__ ( - "movel #0xa1000200, %%d0\n\t" - "movec %%d0, %%CACR\n\t" - "nop\n\t" - : : : "d0" ); -#endif /* CONFIG_M5249 */ -#ifdef CONFIG_M532x - __asm__ __volatile__ ( - "movel #0x81000200, %%d0\n\t" - "movec %%d0, %%CACR\n\t" - "nop\n\t" - : : : "d0" ); -#endif /* CONFIG_M532x */ -} - -#endif /* _M68KNOMMU_CACHEFLUSH_H */ diff --git a/include/asm-m68knommu/checksum.h b/include/asm-m68knommu/checksum.h deleted file mode 100644 index 81883482ffb1..000000000000 --- a/include/asm-m68knommu/checksum.h +++ /dev/null @@ -1,132 +0,0 @@ -#ifndef _M68K_CHECKSUM_H -#define _M68K_CHECKSUM_H - -#include - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -__wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum); - - -/* - * the same as csum_partial_copy, but copies from user space. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -extern __wsum csum_partial_copy_from_user(const void __user *src, - void *dst, int len, __wsum sum, int *csum_err); - -__sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp = (__force u32)sum; -#ifdef CONFIG_COLDFIRE - tmp = (tmp & 0xffff) + (tmp >> 16); - tmp = (tmp & 0xffff) + (tmp >> 16); - return (__force __sum16)~tmp; -#else - __asm__("swap %1\n\t" - "addw %1, %0\n\t" - "clrw %1\n\t" - "addxw %1, %0" - : "=&d" (sum), "=&d" (tmp) - : "0" (sum), "1" (sum)); - return (__force __sum16)~sum; -#endif -} - - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ - -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - __asm__ ("addl %1,%0\n\t" - "addxl %4,%0\n\t" - "addxl %5,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=&d" (saddr) - : "0" (daddr), "1" (saddr), "d" (len + proto), - "d"(sum)); - return sum; -} - -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -extern __sum16 ip_compute_csum(const void *buff, int len); - -#define _HAVE_ARCH_IPV6_CSUM -static __inline__ __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, - __u32 len, unsigned short proto, __wsum sum) -{ - register unsigned long tmp; - __asm__("addl %2@,%0\n\t" - "movel %2@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(12),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@,%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(12),%1\n\t" - "addxl %1,%0\n\t" - "addxl %4,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=&d" (tmp) - : "a" (saddr), "a" (daddr), "d" (len + proto), - "0" (sum)); - - return csum_fold(sum); -} - -#endif /* _M68K_CHECKSUM_H */ diff --git a/include/asm-m68knommu/coldfire.h b/include/asm-m68knommu/coldfire.h deleted file mode 100644 index 83a9fa4e618a..000000000000 --- a/include/asm-m68knommu/coldfire.h +++ /dev/null @@ -1,51 +0,0 @@ -/****************************************************************************/ - -/* - * coldfire.h -- Motorola ColdFire CPU sepecific defines - * - * (C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef coldfire_h -#define coldfire_h -/****************************************************************************/ - - -/* - * Define master clock frequency. This is essentially done at config - * time now. No point enumerating dozens of possible clock options - * here. Also the peripheral clock (bus clock) divide ratio is set - * at config time too. - */ -#ifdef CONFIG_CLOCK_SET -#define MCF_CLK CONFIG_CLOCK_FREQ -#define MCF_BUSCLK (CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV) -#else -#error "Don't know what your ColdFire CPU clock frequency is??" -#endif - -/* - * Define the processor support peripherals base address. - * This is generally setup by the boards start up code. - */ -#define MCF_MBAR 0x10000000 -#define MCF_MBAR2 0x80000000 -#if defined(CONFIG_M520x) -#define MCF_IPSBAR 0xFC000000 -#else -#define MCF_IPSBAR 0x40000000 -#endif - -#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M520x) -#undef MCF_MBAR -#define MCF_MBAR MCF_IPSBAR -#elif defined(CONFIG_M532x) -#undef MCF_MBAR -#define MCF_MBAR 0x00000000 -#endif - -/****************************************************************************/ -#endif /* coldfire_h */ diff --git a/include/asm-m68knommu/commproc.h b/include/asm-m68knommu/commproc.h deleted file mode 100644 index edf5eb6c08d2..000000000000 --- a/include/asm-m68knommu/commproc.h +++ /dev/null @@ -1,703 +0,0 @@ - -/* - * 68360 Communication Processor Module. - * Copyright (c) 2000 Michael Leslie (mc68360) after: - * Copyright (c) 1997 Dan Malek (mpc8xx) - * - * This file contains structures and information for the communication - * processor channels. Some CPM control and status is available - * through the 68360 internal memory map. See include/asm/360_immap.h for details. - * This file is not a complete map of all of the 360 QUICC's capabilities - * - * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 - * bytes of the DP RAM and relocates the I2C parameter area to the - * IDMA1 space. The remaining DP RAM is available for buffer descriptors - * or other use. - */ -#ifndef __CPM_360__ -#define __CPM_360__ - - -/* CPM Command register masks: */ -#define CPM_CR_RST ((ushort)0x8000) -#define CPM_CR_OPCODE ((ushort)0x0f00) -#define CPM_CR_CHAN ((ushort)0x00f0) -#define CPM_CR_FLG ((ushort)0x0001) - -/* CPM Command set (opcodes): */ -#define CPM_CR_INIT_TRX ((ushort)0x0000) -#define CPM_CR_INIT_RX ((ushort)0x0001) -#define CPM_CR_INIT_TX ((ushort)0x0002) -#define CPM_CR_HUNT_MODE ((ushort)0x0003) -#define CPM_CR_STOP_TX ((ushort)0x0004) -#define CPM_CR_GRSTOP_TX ((ushort)0x0005) -#define CPM_CR_RESTART_TX ((ushort)0x0006) -#define CPM_CR_CLOSE_RXBD ((ushort)0x0007) -#define CPM_CR_SET_GADDR ((ushort)0x0008) -#define CPM_CR_GCI_TIMEOUT ((ushort)0x0009) -#define CPM_CR_GCI_ABORT ((ushort)0x000a) -#define CPM_CR_RESET_BCS ((ushort)0x000a) - -/* CPM Channel numbers. */ -#define CPM_CR_CH_SCC1 ((ushort)0x0000) -#define CPM_CR_CH_SCC2 ((ushort)0x0004) -#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / Timers */ -#define CPM_CR_CH_TMR ((ushort)0x0005) -#define CPM_CR_CH_SCC3 ((ushort)0x0008) -#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / IDMA1 */ -#define CPM_CR_CH_IDMA1 ((ushort)0x0009) -#define CPM_CR_CH_SCC4 ((ushort)0x000c) -#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / IDMA2 */ -#define CPM_CR_CH_IDMA2 ((ushort)0x000d) - - -#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) - -#if 1 /* mleslie: I dinna think we have any such restrictions on - * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */ - -/* The dual ported RAM is multi-functional. Some areas can be (and are - * being) used for microcode. There is an area that can only be used - * as data ram for buffer descriptors, which is all we use right now. - * Currently the first 512 and last 256 bytes are used for microcode. - */ -/* mleslie: The uCquicc board is using no extra microcode in DPRAM */ -#define CPM_DATAONLY_BASE ((uint)0x0000) -#define CPM_DATAONLY_SIZE ((uint)0x0800) -#define CPM_DP_NOSPACE ((uint)0x7fffffff) - -#endif - - -/* Export the base address of the communication processor registers - * and dual port ram. */ -/* extern cpm360_t *cpmp; */ /* Pointer to comm processor */ -extern QUICC *pquicc; -uint m360_cpm_dpalloc(uint size); -/* void *m360_cpm_hostalloc(uint size); */ -void m360_cpm_setbrg(uint brg, uint rate); - -#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h */ -/* Buffer descriptors used by many of the CPM protocols. */ -typedef struct cpm_buf_desc { - ushort cbd_sc; /* Status and Control */ - ushort cbd_datlen; /* Data length in buffer */ - uint cbd_bufaddr; /* Buffer address in host memory */ -} cbd_t; -#endif - - -/* rx bd status/control bits */ -#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ -#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */ -#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ -#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */ - -#define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */ -#define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */ - -#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ -#define BD_SC_ID ((ushort)0x0100) /* Received too many idles */ - -#define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */ -#define BD_SC_DE ((ushort)0x0080) /* DPLL Error (HDLC) */ - -#define BD_SC_BR ((ushort)0x0020) /* Break received */ -#define BD_SC_LG ((ushort)0x0020) /* Frame length violation (HDLC) */ - -#define BD_SC_FR ((ushort)0x0010) /* Framing error */ -#define BD_SC_NO ((ushort)0x0010) /* Nonoctet aligned frame (HDLC) */ - -#define BD_SC_PR ((ushort)0x0008) /* Parity error */ -#define BD_SC_AB ((ushort)0x0008) /* Received abort Sequence (HDLC) */ - -#define BD_SC_OV ((ushort)0x0002) /* Overrun */ -#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */ - -/* tx bd status/control bits (as differ from rx bd) */ -#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ -#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */ -#define BD_SC_P ((ushort)0x0100) /* xmt preamble */ -#define BD_SC_UN ((ushort)0x0002) /* Underrun */ - - - - -/* Parameter RAM offsets. */ - - - -/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM. - * In 2.0, we use a more structured C struct map of DPRAM, and so - * instead, we need only a parameter ram `slot' */ - -#define PRSLOT_SCC1 0 -#define PRSLOT_SCC2 1 -#define PRSLOT_SCC3 2 -#define PRSLOT_SMC1 2 -#define PRSLOT_SCC4 3 -#define PRSLOT_SMC2 3 - - -/* #define PROFF_SCC1 ((uint)0x0000) */ -/* #define PROFF_SCC2 ((uint)0x0100) */ -/* #define PROFF_SCC3 ((uint)0x0200) */ -/* #define PROFF_SMC1 ((uint)0x0280) */ -/* #define PROFF_SCC4 ((uint)0x0300) */ -/* #define PROFF_SMC2 ((uint)0x0380) */ - - -/* Define enough so I can at least use the serial port as a UART. - * The MBX uses SMC1 as the host serial port. - */ -typedef struct smc_uart { - ushort smc_rbase; /* Rx Buffer descriptor base address */ - ushort smc_tbase; /* Tx Buffer descriptor base address */ - u_char smc_rfcr; /* Rx function code */ - u_char smc_tfcr; /* Tx function code */ - ushort smc_mrblr; /* Max receive buffer length */ - uint smc_rstate; /* Internal */ - uint smc_idp; /* Internal */ - ushort smc_rbptr; /* Internal */ - ushort smc_ibc; /* Internal */ - uint smc_rxtmp; /* Internal */ - uint smc_tstate; /* Internal */ - uint smc_tdp; /* Internal */ - ushort smc_tbptr; /* Internal */ - ushort smc_tbc; /* Internal */ - uint smc_txtmp; /* Internal */ - ushort smc_maxidl; /* Maximum idle characters */ - ushort smc_tmpidl; /* Temporary idle counter */ - ushort smc_brklen; /* Last received break length */ - ushort smc_brkec; /* rcv'd break condition counter */ - ushort smc_brkcr; /* xmt break count register */ - ushort smc_rmask; /* Temporary bit mask */ -} smc_uart_t; - -/* Function code bits. -*/ -#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ - -/* SMC uart mode register. -*/ -#define SMCMR_REN ((ushort)0x0001) -#define SMCMR_TEN ((ushort)0x0002) -#define SMCMR_DM ((ushort)0x000c) -#define SMCMR_SM_GCI ((ushort)0x0000) -#define SMCMR_SM_UART ((ushort)0x0020) -#define SMCMR_SM_TRANS ((ushort)0x0030) -#define SMCMR_SM_MASK ((ushort)0x0030) -#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ -#define SMCMR_REVD SMCMR_PM_EVEN -#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ -#define SMCMR_BS SMCMR_PEN -#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ -#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ -#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) - -/* SMC2 as Centronics parallel printer. It is half duplex, in that - * it can only receive or transmit. The parameter ram values for - * each direction are either unique or properly overlap, so we can - * include them in one structure. - */ -typedef struct smc_centronics { - ushort scent_rbase; - ushort scent_tbase; - u_char scent_cfcr; - u_char scent_smask; - ushort scent_mrblr; - uint scent_rstate; - uint scent_r_ptr; - ushort scent_rbptr; - ushort scent_r_cnt; - uint scent_rtemp; - uint scent_tstate; - uint scent_t_ptr; - ushort scent_tbptr; - ushort scent_t_cnt; - uint scent_ttemp; - ushort scent_max_sl; - ushort scent_sl_cnt; - ushort scent_character1; - ushort scent_character2; - ushort scent_character3; - ushort scent_character4; - ushort scent_character5; - ushort scent_character6; - ushort scent_character7; - ushort scent_character8; - ushort scent_rccm; - ushort scent_rccr; -} smc_cent_t; - -/* Centronics Status Mask Register. -*/ -#define SMC_CENT_F ((u_char)0x08) -#define SMC_CENT_PE ((u_char)0x04) -#define SMC_CENT_S ((u_char)0x02) - -/* SMC Event and Mask register. -*/ -#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ -#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ -#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ -#define SMCM_BSY ((unsigned char)0x04) -#define SMCM_TX ((unsigned char)0x02) -#define SMCM_RX ((unsigned char)0x01) - -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - -/* SCCs. -*/ -#define SCC_GSMRH_IRP ((uint)0x00040000) -#define SCC_GSMRH_GDE ((uint)0x00010000) -#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) -#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) -#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) -#define SCC_GSMRH_REVD ((uint)0x00002000) -#define SCC_GSMRH_TRX ((uint)0x00001000) -#define SCC_GSMRH_TTX ((uint)0x00000800) -#define SCC_GSMRH_CDP ((uint)0x00000400) -#define SCC_GSMRH_CTSP ((uint)0x00000200) -#define SCC_GSMRH_CDS ((uint)0x00000100) -#define SCC_GSMRH_CTSS ((uint)0x00000080) -#define SCC_GSMRH_TFL ((uint)0x00000040) -#define SCC_GSMRH_RFW ((uint)0x00000020) -#define SCC_GSMRH_TXSY ((uint)0x00000010) -#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) -#define SCC_GSMRH_SYNL8 ((uint)0x00000008) -#define SCC_GSMRH_SYNL4 ((uint)0x00000004) -#define SCC_GSMRH_RTSM ((uint)0x00000002) -#define SCC_GSMRH_RSYN ((uint)0x00000001) - -#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ -#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) -#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) -#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) -#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) -#define SCC_GSMRL_TCI ((uint)0x10000000) -#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) -#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) -#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) -#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) -#define SCC_GSMRL_RINV ((uint)0x02000000) -#define SCC_GSMRL_TINV ((uint)0x01000000) -#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) -#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) -#define SCC_GSMRL_TPL_48 ((uint)0x00800000) -#define SCC_GSMRL_TPL_32 ((uint)0x00600000) -#define SCC_GSMRL_TPL_16 ((uint)0x00400000) -#define SCC_GSMRL_TPL_8 ((uint)0x00200000) -#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) -#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) -#define SCC_GSMRL_TPP_01 ((uint)0x00100000) -#define SCC_GSMRL_TPP_10 ((uint)0x00080000) -#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) -#define SCC_GSMRL_TEND ((uint)0x00040000) -#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) -#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) -#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) -#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) -#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) -#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) -#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) -#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) -#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) -#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) -#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) -#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) -#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) -#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) -#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ -#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) -#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) -#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) -#define SCC_GSMRL_ENR ((uint)0x00000020) -#define SCC_GSMRL_ENT ((uint)0x00000010) -#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) -#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) -#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) -#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) -#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) -#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) -#define SCC_GSMRL_MODE_UART ((uint)0x00000004) -#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) -#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) -#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) - -#define SCC_TODR_TOD ((ushort)0x8000) - -/* SCC Event and Mask register. -*/ -#define SCCM_TXE ((unsigned char)0x10) -#define SCCM_BSY ((unsigned char)0x04) -#define SCCM_TX ((unsigned char)0x02) -#define SCCM_RX ((unsigned char)0x01) - -typedef struct scc_param { - ushort scc_rbase; /* Rx Buffer descriptor base address */ - ushort scc_tbase; /* Tx Buffer descriptor base address */ - u_char scc_rfcr; /* Rx function code */ - u_char scc_tfcr; /* Tx function code */ - ushort scc_mrblr; /* Max receive buffer length */ - uint scc_rstate; /* Internal */ - uint scc_idp; /* Internal */ - ushort scc_rbptr; /* Internal */ - ushort scc_ibc; /* Internal */ - uint scc_rxtmp; /* Internal */ - uint scc_tstate; /* Internal */ - uint scc_tdp; /* Internal */ - ushort scc_tbptr; /* Internal */ - ushort scc_tbc; /* Internal */ - uint scc_txtmp; /* Internal */ - uint scc_rcrc; /* Internal */ - uint scc_tcrc; /* Internal */ -} sccp_t; - - -/* Function code bits. - */ -#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ -#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */ - -/* CPM Ethernet through SCC1. - */ -typedef struct scc_enet { - sccp_t sen_genscc; - uint sen_cpres; /* Preset CRC */ - uint sen_cmask; /* Constant mask for CRC */ - uint sen_crcec; /* CRC Error counter */ - uint sen_alec; /* alignment error counter */ - uint sen_disfc; /* discard frame counter */ - ushort sen_pads; /* Tx short frame pad character */ - ushort sen_retlim; /* Retry limit threshold */ - ushort sen_retcnt; /* Retry limit counter */ - ushort sen_maxflr; /* maximum frame length register */ - ushort sen_minflr; /* minimum frame length register */ - ushort sen_maxd1; /* maximum DMA1 length */ - ushort sen_maxd2; /* maximum DMA2 length */ - ushort sen_maxd; /* Rx max DMA */ - ushort sen_dmacnt; /* Rx DMA counter */ - ushort sen_maxb; /* Max BD byte count */ - ushort sen_gaddr1; /* Group address filter */ - ushort sen_gaddr2; - ushort sen_gaddr3; - ushort sen_gaddr4; - uint sen_tbuf0data0; /* Save area 0 - current frame */ - uint sen_tbuf0data1; /* Save area 1 - current frame */ - uint sen_tbuf0rba; /* Internal */ - uint sen_tbuf0crc; /* Internal */ - ushort sen_tbuf0bcnt; /* Internal */ - ushort sen_paddrh; /* physical address (MSB) */ - ushort sen_paddrm; - ushort sen_paddrl; /* physical address (LSB) */ - ushort sen_pper; /* persistence */ - ushort sen_rfbdptr; /* Rx first BD pointer */ - ushort sen_tfbdptr; /* Tx first BD pointer */ - ushort sen_tlbdptr; /* Tx last BD pointer */ - uint sen_tbuf1data0; /* Save area 0 - current frame */ - uint sen_tbuf1data1; /* Save area 1 - current frame */ - uint sen_tbuf1rba; /* Internal */ - uint sen_tbuf1crc; /* Internal */ - ushort sen_tbuf1bcnt; /* Internal */ - ushort sen_txlen; /* Tx Frame length counter */ - ushort sen_iaddr1; /* Individual address filter */ - ushort sen_iaddr2; - ushort sen_iaddr3; - ushort sen_iaddr4; - ushort sen_boffcnt; /* Backoff counter */ - - /* NOTE: Some versions of the manual have the following items - * incorrectly documented. Below is the proper order. - */ - ushort sen_taddrh; /* temp address (MSB) */ - ushort sen_taddrm; - ushort sen_taddrl; /* temp address (LSB) */ -} scc_enet_t; - - - -#if defined (CONFIG_UCQUICC) -/* uCquicc has the following signals connected to Ethernet: - * 68360 - lxt905 - * PA0/RXD1 - rxd - * PA1/TXD1 - txd - * PA8/CLK1 - tclk - * PA9/CLK2 - rclk - * PC0/!RTS1 - t_en - * PC1/!CTS1 - col - * PC5/!CD1 - cd - */ -#define PA_ENET_RXD PA_RXD1 -#define PA_ENET_TXD PA_TXD1 -#define PA_ENET_TCLK PA_CLK1 -#define PA_ENET_RCLK PA_CLK2 -#define PC_ENET_TENA PC_RTS1 -#define PC_ENET_CLSN PC_CTS1 -#define PC_ENET_RENA PC_CD1 - -/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to - * SCC1. - */ -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000002c) - -#endif /* config_ucquicc */ - - -#ifdef MBX -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC1 use. The TCLK and RCLK seem unique - * to the MBX860 board. Any two of the four available clocks could be - * used, and the MPC860 cookbook manual has an example using different - * clock pins. - */ -#define PA_ENET_RXD ((ushort)0x0001) -#define PA_ENET_TXD ((ushort)0x0002) -#define PA_ENET_TCLK ((ushort)0x0200) -#define PA_ENET_RCLK ((ushort)0x0800) -#define PC_ENET_TENA ((ushort)0x0001) -#define PC_ENET_CLSN ((ushort)0x0010) -#define PC_ENET_RENA ((ushort)0x0020) - -/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to - * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. - */ -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000003d) -#endif - -#ifdef CONFIG_RPXLITE -/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of - * this may be unique to the RPX-Lite configuration. - * Note TENA is on Port B. - */ -#define PA_ENET_RXD ((ushort)0x0004) -#define PA_ENET_TXD ((ushort)0x0008) -#define PA_ENET_TCLK ((ushort)0x0200) -#define PA_ENET_RCLK ((ushort)0x0800) -#define PB_ENET_TENA ((uint)0x00002000) -#define PC_ENET_CLSN ((ushort)0x0040) -#define PC_ENET_RENA ((ushort)0x0080) - -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00003d00) -#endif - -#ifdef CONFIG_BSEIP -/* This ENET stuff is for the MPC823 with ethernet on SCC2. - * This is unique to the BSE ip-Engine board. - */ -#define PA_ENET_RXD ((ushort)0x0004) -#define PA_ENET_TXD ((ushort)0x0008) -#define PA_ENET_TCLK ((ushort)0x0100) -#define PA_ENET_RCLK ((ushort)0x0200) -#define PB_ENET_TENA ((uint)0x00002000) -#define PC_ENET_CLSN ((ushort)0x0040) -#define PC_ENET_RENA ((ushort)0x0080) - -/* BSE uses port B and C bits for PHY control also. -*/ -#define PB_BSE_POWERUP ((uint)0x00000004) -#define PB_BSE_FDXDIS ((uint)0x00008000) -#define PC_BSE_LOOPBACK ((ushort)0x0800) - -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00002c00) -#endif - -/* SCC Event register as used by Ethernet. -*/ -#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ -#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* SCC Mode Register (PMSR) as used by Ethernet. -*/ -#define SCC_PMSR_HBC ((ushort)0x8000) /* Enable heartbeat */ -#define SCC_PMSR_FC ((ushort)0x4000) /* Force collision */ -#define SCC_PMSR_RSH ((ushort)0x2000) /* Receive short frames */ -#define SCC_PMSR_IAM ((ushort)0x1000) /* Check individual hash */ -#define SCC_PMSR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ -#define SCC_PMSR_PRO ((ushort)0x0200) /* Promiscuous mode */ -#define SCC_PMSR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ -#define SCC_PMSR_SBT ((ushort)0x0080) /* Special backoff timer */ -#define SCC_PMSR_LPB ((ushort)0x0040) /* Set Loopback mode */ -#define SCC_PMSR_SIP ((ushort)0x0020) /* Sample Input Pins */ -#define SCC_PMSR_LCW ((ushort)0x0010) /* Late collision window */ -#define SCC_PMSR_NIB22 ((ushort)0x000a) /* Start frame search */ -#define SCC_PMSR_FDE ((ushort)0x0001) /* Full duplex enable */ - -/* Buffer descriptor control/status used by Ethernet receive. -*/ -#define BD_ENET_RX_EMPTY ((ushort)0x8000) -#define BD_ENET_RX_WRAP ((ushort)0x2000) -#define BD_ENET_RX_INTR ((ushort)0x1000) -#define BD_ENET_RX_LAST ((ushort)0x0800) -#define BD_ENET_RX_FIRST ((ushort)0x0400) -#define BD_ENET_RX_MISS ((ushort)0x0100) -#define BD_ENET_RX_LG ((ushort)0x0020) -#define BD_ENET_RX_NO ((ushort)0x0010) -#define BD_ENET_RX_SH ((ushort)0x0008) -#define BD_ENET_RX_CR ((ushort)0x0004) -#define BD_ENET_RX_OV ((ushort)0x0002) -#define BD_ENET_RX_CL ((ushort)0x0001) -#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ - -/* Buffer descriptor control/status used by Ethernet transmit. -*/ -#define BD_ENET_TX_READY ((ushort)0x8000) -#define BD_ENET_TX_PAD ((ushort)0x4000) -#define BD_ENET_TX_WRAP ((ushort)0x2000) -#define BD_ENET_TX_INTR ((ushort)0x1000) -#define BD_ENET_TX_LAST ((ushort)0x0800) -#define BD_ENET_TX_TC ((ushort)0x0400) -#define BD_ENET_TX_DEF ((ushort)0x0200) -#define BD_ENET_TX_HB ((ushort)0x0100) -#define BD_ENET_TX_LC ((ushort)0x0080) -#define BD_ENET_TX_RL ((ushort)0x0040) -#define BD_ENET_TX_RCMASK ((ushort)0x003c) -#define BD_ENET_TX_UN ((ushort)0x0002) -#define BD_ENET_TX_CSL ((ushort)0x0001) -#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ - -/* SCC as UART -*/ -typedef struct scc_uart { - sccp_t scc_genscc; - uint scc_res1; /* Reserved */ - uint scc_res2; /* Reserved */ - ushort scc_maxidl; /* Maximum idle chars */ - ushort scc_idlc; /* temp idle counter */ - ushort scc_brkcr; /* Break count register */ - ushort scc_parec; /* receive parity error counter */ - ushort scc_frmec; /* receive framing error counter */ - ushort scc_nosec; /* receive noise counter */ - ushort scc_brkec; /* receive break condition counter */ - ushort scc_brkln; /* last received break length */ - ushort scc_uaddr1; /* UART address character 1 */ - ushort scc_uaddr2; /* UART address character 2 */ - ushort scc_rtemp; /* Temp storage */ - ushort scc_toseq; /* Transmit out of sequence char */ - ushort scc_char1; /* control character 1 */ - ushort scc_char2; /* control character 2 */ - ushort scc_char3; /* control character 3 */ - ushort scc_char4; /* control character 4 */ - ushort scc_char5; /* control character 5 */ - ushort scc_char6; /* control character 6 */ - ushort scc_char7; /* control character 7 */ - ushort scc_char8; /* control character 8 */ - ushort scc_rccm; /* receive control character mask */ - ushort scc_rccr; /* receive control character register */ - ushort scc_rlbc; /* receive last break character */ -} scc_uart_t; - -/* SCC Event and Mask registers when it is used as a UART. -*/ -#define UART_SCCM_GLR ((ushort)0x1000) -#define UART_SCCM_GLT ((ushort)0x0800) -#define UART_SCCM_AB ((ushort)0x0200) -#define UART_SCCM_IDL ((ushort)0x0100) -#define UART_SCCM_GRA ((ushort)0x0080) -#define UART_SCCM_BRKE ((ushort)0x0040) -#define UART_SCCM_BRKS ((ushort)0x0020) -#define UART_SCCM_CCR ((ushort)0x0008) -#define UART_SCCM_BSY ((ushort)0x0004) -#define UART_SCCM_TX ((ushort)0x0002) -#define UART_SCCM_RX ((ushort)0x0001) - -/* The SCC PMSR when used as a UART. -*/ -#define SCU_PMSR_FLC ((ushort)0x8000) -#define SCU_PMSR_SL ((ushort)0x4000) -#define SCU_PMSR_CL ((ushort)0x3000) -#define SCU_PMSR_UM ((ushort)0x0c00) -#define SCU_PMSR_FRZ ((ushort)0x0200) -#define SCU_PMSR_RZS ((ushort)0x0100) -#define SCU_PMSR_SYN ((ushort)0x0080) -#define SCU_PMSR_DRT ((ushort)0x0040) -#define SCU_PMSR_PEN ((ushort)0x0010) -#define SCU_PMSR_RPM ((ushort)0x000c) -#define SCU_PMSR_REVP ((ushort)0x0008) -#define SCU_PMSR_TPM ((ushort)0x0003) -#define SCU_PMSR_TEVP ((ushort)0x0003) - -/* CPM Transparent mode SCC. - */ -typedef struct scc_trans { - sccp_t st_genscc; - uint st_cpres; /* Preset CRC */ - uint st_cmask; /* Constant mask for CRC */ -} scc_trans_t; - -#define BD_SCC_TX_LAST ((ushort)0x0800) - - - -/* CPM interrupts. There are nearly 32 interrupts generated by CPM - * channels or devices. All of these are presented to the PPC core - * as a single interrupt. The CPM interrupt handler dispatches its - * own handlers, in a similar fashion to the PPC core handler. We - * use the table as defined in the manuals (i.e. no special high - * priority and SCC1 == SCCa, etc...). - */ -/* #define CPMVEC_NR 32 */ -/* #define CPMVEC_PIO_PC15 ((ushort)0x1f) */ -/* #define CPMVEC_SCC1 ((ushort)0x1e) */ -/* #define CPMVEC_SCC2 ((ushort)0x1d) */ -/* #define CPMVEC_SCC3 ((ushort)0x1c) */ -/* #define CPMVEC_SCC4 ((ushort)0x1b) */ -/* #define CPMVEC_PIO_PC14 ((ushort)0x1a) */ -/* #define CPMVEC_TIMER1 ((ushort)0x19) */ -/* #define CPMVEC_PIO_PC13 ((ushort)0x18) */ -/* #define CPMVEC_PIO_PC12 ((ushort)0x17) */ -/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */ -/* #define CPMVEC_IDMA1 ((ushort)0x15) */ -/* #define CPMVEC_IDMA2 ((ushort)0x14) */ -/* #define CPMVEC_TIMER2 ((ushort)0x12) */ -/* #define CPMVEC_RISCTIMER ((ushort)0x11) */ -/* #define CPMVEC_I2C ((ushort)0x10) */ -/* #define CPMVEC_PIO_PC11 ((ushort)0x0f) */ -/* #define CPMVEC_PIO_PC10 ((ushort)0x0e) */ -/* #define CPMVEC_TIMER3 ((ushort)0x0c) */ -/* #define CPMVEC_PIO_PC9 ((ushort)0x0b) */ -/* #define CPMVEC_PIO_PC8 ((ushort)0x0a) */ -/* #define CPMVEC_PIO_PC7 ((ushort)0x09) */ -/* #define CPMVEC_TIMER4 ((ushort)0x07) */ -/* #define CPMVEC_PIO_PC6 ((ushort)0x06) */ -/* #define CPMVEC_SPI ((ushort)0x05) */ -/* #define CPMVEC_SMC1 ((ushort)0x04) */ -/* #define CPMVEC_SMC2 ((ushort)0x03) */ -/* #define CPMVEC_PIO_PC5 ((ushort)0x02) */ -/* #define CPMVEC_PIO_PC4 ((ushort)0x01) */ -/* #define CPMVEC_ERROR ((ushort)0x00) */ - -extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id); - -/* CPM interrupt configuration vector. -*/ -#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ -#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ -#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ -#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ -#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ -#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ -#define CICR_IEN ((uint)0x00000080) /* Int. enable */ -#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ -#endif /* __CPM_360__ */ diff --git a/include/asm-m68knommu/cputime.h b/include/asm-m68knommu/cputime.h deleted file mode 100644 index a0c4a660878d..000000000000 --- a/include/asm-m68knommu/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68KNOMMU_CPUTIME_H -#define __M68KNOMMU_CPUTIME_H - -#include - -#endif /* __M68KNOMMU_CPUTIME_H */ diff --git a/include/asm-m68knommu/current.h b/include/asm-m68knommu/current.h deleted file mode 100644 index 53ee0f9f7cef..000000000000 --- a/include/asm-m68knommu/current.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _M68KNOMMU_CURRENT_H -#define _M68KNOMMU_CURRENT_H -/* - * current.h - * (C) Copyright 2000, Lineo, David McCullough - * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) - * - * rather than dedicate a register (as the m68k source does), we - * just keep a global, we should probably just change it all to be - * current and lose _current_task. - */ - -#include - -struct task_struct; - -static inline struct task_struct *get_current(void) -{ - return(current_thread_info()->task); -} - -#define current get_current() - -#endif /* _M68KNOMMU_CURRENT_H */ diff --git a/include/asm-m68knommu/dbg.h b/include/asm-m68knommu/dbg.h deleted file mode 100644 index 27af3270f671..000000000000 --- a/include/asm-m68knommu/dbg.h +++ /dev/null @@ -1,6 +0,0 @@ -#define DEBUG 1 -#ifdef CONFIG_COLDFIRE -#define BREAK asm volatile ("halt") -#else -#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0 -#endif diff --git a/include/asm-m68knommu/delay.h b/include/asm-m68knommu/delay.h deleted file mode 100644 index 55cbd6294ab6..000000000000 --- a/include/asm-m68knommu/delay.h +++ /dev/null @@ -1,76 +0,0 @@ -#ifndef _M68KNOMMU_DELAY_H -#define _M68KNOMMU_DELAY_H - -/* - * Copyright (C) 1994 Hamish Macdonald - * Copyright (C) 2004 Greg Ungerer - */ - -#include - -static inline void __delay(unsigned long loops) -{ -#if defined(CONFIG_COLDFIRE) - /* The coldfire runs this loop at significantly different speeds - * depending upon long word alignment or not. We'll pad it to - * long word alignment which is the faster version. - * The 0x4a8e is of course a 'tstl %fp' instruction. This is better - * than using a NOP (0x4e71) instruction because it executes in one - * cycle not three and doesn't allow for an arbitary delay waiting - * for bus cycles to finish. Also fp/a6 isn't likely to cause a - * stall waiting for the register to become valid if such is added - * to the coldfire at some stage. - */ - __asm__ __volatile__ ( ".balignw 4, 0x4a8e\n\t" - "1: subql #1, %0\n\t" - "jcc 1b" - : "=d" (loops) : "0" (loops)); -#else - __asm__ __volatile__ ( "1: subql #1, %0\n\t" - "jcc 1b" - : "=d" (loops) : "0" (loops)); -#endif -} - -/* - * Ideally we use a 32*32->64 multiply to calculate the number of - * loop iterations, but the older standard 68k and ColdFire do not - * have this instruction. So for them we have a clsoe approximation - * loop using 32*32->32 multiplies only. This calculation based on - * the ARM version of delay. - * - * We want to implement: - * - * loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32 - */ - -#define HZSCALE (268435456 / (1000000/HZ)) - -extern unsigned long loops_per_jiffy; - -static inline void _udelay(unsigned long usecs) -{ -#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \ - defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \ - defined(CONFIG_COLDFIRE) - __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6); -#else - unsigned long tmp; - - usecs *= 4295; /* 2**32 / 1000000 */ - __asm__ ("mulul %2,%0:%1" - : "=d" (usecs), "=d" (tmp) - : "d" (usecs), "1" (loops_per_jiffy*HZ)); - __delay(usecs); -#endif -} - -/* - * Moved the udelay() function into library code, no longer inlined. - * I had to change the algorithm because we are overflowing now on - * the faster ColdFire parts. The code is a little bigger, so it makes - * sense to library it. - */ -extern void udelay(unsigned long usecs); - -#endif /* defined(_M68KNOMMU_DELAY_H) */ diff --git a/include/asm-m68knommu/device.h b/include/asm-m68knommu/device.h deleted file mode 100644 index d8f9872b0e2d..000000000000 --- a/include/asm-m68knommu/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/include/asm-m68knommu/div64.h b/include/asm-m68knommu/div64.h deleted file mode 100644 index 6cd978cefb28..000000000000 --- a/include/asm-m68knommu/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/dma-mapping.h b/include/asm-m68knommu/dma-mapping.h deleted file mode 100644 index 6aeab18e58bd..000000000000 --- a/include/asm-m68knommu/dma-mapping.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _M68KNOMMU_DMA_MAPPING_H -#define _M68KNOMMU_DMA_MAPPING_H - -#ifdef CONFIG_PCI -#include -#else -#include -#endif - -#endif /* _M68KNOMMU_DMA_MAPPING_H */ diff --git a/include/asm-m68knommu/dma.h b/include/asm-m68knommu/dma.h deleted file mode 100644 index 939a02056217..000000000000 --- a/include/asm-m68knommu/dma.h +++ /dev/null @@ -1,494 +0,0 @@ -#ifndef _M68K_DMA_H -#define _M68K_DMA_H 1 - -//#define DMA_DEBUG 1 - - -#ifdef CONFIG_COLDFIRE -/* - * ColdFire DMA Model: - * ColdFire DMA supports two forms of DMA: Single and Dual address. Single - * address mode emits a source address, and expects that the device will either - * pick up the data (DMA READ) or source data (DMA WRITE). This implies that - * the device will place data on the correct byte(s) of the data bus, as the - * memory transactions are always 32 bits. This implies that only 32 bit - * devices will find single mode transfers useful. Dual address DMA mode - * performs two cycles: source read and destination write. ColdFire will - * align the data so that the device will always get the correct bytes, thus - * is useful for 8 and 16 bit devices. This is the mode that is supported - * below. - * - * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 - * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) - * - * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000 - * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) - * - * APR/18/2002 : added proper support for MCF5272 DMA controller. - * Arthur Shipkowski (art@videon-central.com) - */ - -#include -#include -#include - -/* - * Set number of channels of DMA on ColdFire for different implementations. - */ -#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \ - defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) -#define MAX_M68K_DMA_CHANNELS 4 -#elif defined(CONFIG_M5272) -#define MAX_M68K_DMA_CHANNELS 1 -#elif defined(CONFIG_M532x) -#define MAX_M68K_DMA_CHANNELS 0 -#else -#define MAX_M68K_DMA_CHANNELS 2 -#endif - -extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; -extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; - -#if !defined(CONFIG_M5272) -#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */ -#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */ -#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */ -#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */ - -/* I/O to memory, 8 bits, mode */ -#define DMA_MODE_READ 0 -/* memory to I/O, 8 bits, mode */ -#define DMA_MODE_WRITE 1 -/* I/O to memory, 16 bits, mode */ -#define DMA_MODE_READ_WORD 2 -/* memory to I/O, 16 bits, mode */ -#define DMA_MODE_WRITE_WORD 3 -/* I/O to memory, 32 bits, mode */ -#define DMA_MODE_READ_LONG 4 -/* memory to I/O, 32 bits, mode */ -#define DMA_MODE_WRITE_LONG 5 -/* I/O to memory, 8 bits, single-address-mode */ -#define DMA_MODE_READ_SINGLE 8 -/* memory to I/O, 8 bits, single-address-mode */ -#define DMA_MODE_WRITE_SINGLE 9 -/* I/O to memory, 16 bits, single-address-mode */ -#define DMA_MODE_READ_WORD_SINGLE 10 -/* memory to I/O, 16 bits, single-address-mode */ -#define DMA_MODE_WRITE_WORD_SINGLE 11 -/* I/O to memory, 32 bits, single-address-mode */ -#define DMA_MODE_READ_LONG_SINGLE 12 -/* memory to I/O, 32 bits, single-address-mode */ -#define DMA_MODE_WRITE_LONG_SINGLE 13 - -#else /* CONFIG_M5272 is defined */ - -/* Source static-address mode */ -#define DMA_MODE_SRC_SA_BIT 0x01 -/* Two bits to select between all four modes */ -#define DMA_MODE_SSIZE_MASK 0x06 -/* Offset to shift bits in */ -#define DMA_MODE_SSIZE_OFF 0x01 -/* Destination static-address mode */ -#define DMA_MODE_DES_SA_BIT 0x10 -/* Two bits to select between all four modes */ -#define DMA_MODE_DSIZE_MASK 0x60 -/* Offset to shift bits in */ -#define DMA_MODE_DSIZE_OFF 0x05 -/* Size modifiers */ -#define DMA_MODE_SIZE_LONG 0x00 -#define DMA_MODE_SIZE_BYTE 0x01 -#define DMA_MODE_SIZE_WORD 0x02 -#define DMA_MODE_SIZE_LINE 0x03 - -/* - * Aliases to help speed quick ports; these may be suboptimal, however. They - * do not include the SINGLE mode modifiers since the MCF5272 does not have a - * mode where the device is in control of its addressing. - */ - -/* I/O to memory, 8 bits, mode */ -#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 8 bits, mode */ -#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) -/* I/O to memory, 16 bits, mode */ -#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 16 bits, mode */ -#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) -/* I/O to memory, 32 bits, mode */ -#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 32 bits, mode */ -#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) - -#endif /* !defined(CONFIG_M5272) */ - -#if !defined(CONFIG_M5272) -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("enable_dma(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT; -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - volatile unsigned char *dmapb; - -#ifdef DMA_DEBUG - printk("disable_dma(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmapb = (unsigned char *) dma_base_addr[dmanr]; - - /* Turn off external requests, and stop any DMA in progress */ - dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT; - dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE; -} - -/* - * Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while interrupts are disabled! --- - * - * This is a NOP for ColdFire. Provide a stub for compatibility. - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - - volatile unsigned char *dmabp; - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); -#endif - - dmabp = (unsigned char *) dma_base_addr[dmanr]; - dmawp = (unsigned short *) dma_base_addr[dmanr]; - - // Clear config errors - dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; - - // Set command register - dmawp[MCFDMA_DCR] = - MCFDMA_DCR_INT | // Enable completion irq - MCFDMA_DCR_CS | // Force one xfer per request - MCFDMA_DCR_AA | // Enable auto alignment - // single-address-mode - ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) | - // sets s_rw (-> r/w) high if Memory to I/0 - ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) | - // Memory to I/O or I/O to Memory - ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) | - // 32 bit, 16 bit or 8 bit transfers - ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD : - ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG : - MCFDMA_DCR_SSIZE_BYTE)) | - ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD : - ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG : - MCFDMA_DCR_DSIZE_BYTE)); - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__, - dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR], - (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]); -#endif -} - -/* Set transfer address for specific DMA channel */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - volatile unsigned short *dmawp; - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - // Determine which address registers are used for memory/device accesses - if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) { - // Source incrementing, must be memory - dmalp[MCFDMA_SAR] = a; - // Set dest address, must be device - dmalp[MCFDMA_DAR] = dma_device_address[dmanr]; - } else { - // Destination incrementing, must be memory - dmalp[MCFDMA_DAR] = a; - // Set source address, must be device - dmalp[MCFDMA_SAR] = dma_device_address[dmanr]; - } - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", - __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR], - (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR], - (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]); -#endif -} - -/* - * Specific for Coldfire - sets device address. - * Should be called after the mode set call, and before set DMA address. - */ -static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) -{ -#ifdef DMA_DEBUG - printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dma_device_address[dmanr] = a; -} - -/* - * NOTE 2: "count" represents _bytes_. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmawp[MCFDMA_BCR] = (unsigned short)count; -} - -/* - * Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * Otherwise, it returns the number of _bytes_ left to transfer. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - unsigned short count; - -#ifdef DMA_DEBUG - printk("get_dma_residue(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - count = dmawp[MCFDMA_BCR]; - return((int) count); -} -#else /* CONFIG_M5272 is defined */ - -/* - * The MCF5272 DMA controller is very different than the controller defined above - * in terms of register mapping. For instance, with the exception of the 16-bit - * interrupt register (IRQ#85, for reference), all of the registers are 32-bit. - * - * The big difference, however, is the lack of device-requested DMA. All modes - * are dual address transfer, and there is no 'device' setup or direction bit. - * You can DMA between a device and memory, between memory and memory, or even between - * two devices directly, with any combination of incrementing and non-incrementing - * addresses you choose. This puts a crimp in distinguishing between the 'device - * address' set up by set_dma_device_addr. - * - * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr, - * which will act exactly as above in -- it will look to see if the source is set to - * autoincrement, and if so it will make the source use the set_dma_addr value and the - * destination the set_dma_device_addr value. Otherwise the source will be set to the - * set_dma_device_addr value and the destination will get the set_dma_addr value. - * - * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions - * and make it explicit. Depending on what you're doing, one of these two should work - * for you, but don't mix them in the same transfer setup. - */ - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("enable_dma(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN; -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("disable_dma(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - /* Turn off external requests, and stop any DMA in progress */ - dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN; - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; -} - -/* - * Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while interrupts are disabled! --- - * - * This is a NOP for ColdFire. Provide a stub for compatibility. - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - - volatile unsigned int *dmalp; - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); -#endif - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmawp = (unsigned short *) dma_base_addr[dmanr]; - - // Clear config errors - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; - - // Set command register - dmalp[MCFDMA_DMR] = - MCFDMA_DMR_RQM_DUAL | // Mandatory Request Mode setting - MCFDMA_DMR_DSTT_SD | // Set up addressing types; set to supervisor-data. - MCFDMA_DMR_SRCT_SD | // Set up addressing types; set to supervisor-data. - // source static-address-mode - ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) | - // dest static-address-mode - ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) | - // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 - (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) | - (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF); - - dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */ - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__, - dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR], - (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]); -#endif -} - -/* Set transfer address for specific DMA channel */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - // Determine which address registers are used for memory/device accesses - if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) { - // Source incrementing, must be memory - dmalp[MCFDMA_DSAR] = a; - // Set dest address, must be device - dmalp[MCFDMA_DDAR] = dma_device_address[dmanr]; - } else { - // Destination incrementing, must be memory - dmalp[MCFDMA_DDAR] = a; - // Set source address, must be device - dmalp[MCFDMA_DSAR] = dma_device_address[dmanr]; - } - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", - __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR], - (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR], - (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]); -#endif -} - -/* - * Specific for Coldfire - sets device address. - * Should be called after the mode set call, and before set DMA address. - */ -static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) -{ -#ifdef DMA_DEBUG - printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dma_device_address[dmanr] = a; -} - -/* - * NOTE 2: "count" represents _bytes_. - * - * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmalp[MCFDMA_DBCR] = count; -} - -/* - * Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * Otherwise, it returns the number of _bytes_ left to transfer. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - unsigned int count; - -#ifdef DMA_DEBUG - printk("get_dma_residue(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - count = dmalp[MCFDMA_DBCR]; - return(count); -} - -#endif /* !defined(CONFIG_M5272) */ -#endif /* CONFIG_COLDFIRE */ - -#define MAX_DMA_CHANNELS 8 - -/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any - occurrence should be flagged as an error. */ -/* under 2.4 it is actually needed by the new bootmem allocator */ -#define MAX_DMA_ADDRESS PAGE_OFFSET - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -#endif /* _M68K_DMA_H */ diff --git a/include/asm-m68knommu/elf.h b/include/asm-m68knommu/elf.h deleted file mode 100644 index 27f0ec70fba8..000000000000 --- a/include/asm-m68knommu/elf.h +++ /dev/null @@ -1,110 +0,0 @@ -#ifndef __ASMm68k_ELF_H -#define __ASMm68k_ELF_H - -/* - * ELF register definitions.. - */ - -#include -#include - -/* - * 68k ELF relocation types - */ -#define R_68K_NONE 0 -#define R_68K_32 1 -#define R_68K_16 2 -#define R_68K_8 3 -#define R_68K_PC32 4 -#define R_68K_PC16 5 -#define R_68K_PC8 6 -#define R_68K_GOT32 7 -#define R_68K_GOT16 8 -#define R_68K_GOT8 9 -#define R_68K_GOT32O 10 -#define R_68K_GOT16O 11 -#define R_68K_GOT8O 12 -#define R_68K_PLT32 13 -#define R_68K_PLT16 14 -#define R_68K_PLT8 15 -#define R_68K_PLT32O 16 -#define R_68K_PLT16O 17 -#define R_68K_PLT8O 18 -#define R_68K_COPY 19 -#define R_68K_GLOB_DAT 20 -#define R_68K_JMP_SLOT 21 -#define R_68K_RELATIVE 22 - -typedef unsigned long elf_greg_t; - -#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct user_m68kfp_struct elf_fpregset_t; - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ((x)->e_machine == EM_68K) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#define ELF_DATA ELFDATA2MSB -#define ELF_ARCH EM_68K - -/* For SVR4/m68k the function pointer to be registered with `atexit' is - passed in %a1. Although my copy of the ABI has no such statement, it - is actually used on ASV. */ -#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0 - -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE 4096 - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE 0xD0000000UL - -#define ELF_CORE_COPY_REGS(pr_reg, regs) \ - /* Bleech. */ \ - pr_reg[0] = regs->d1; \ - pr_reg[1] = regs->d2; \ - pr_reg[2] = regs->d3; \ - pr_reg[3] = regs->d4; \ - pr_reg[4] = regs->d5; \ - pr_reg[7] = regs->a0; \ - pr_reg[8] = regs->a1; \ - pr_reg[14] = regs->d0; \ - pr_reg[15] = rdusp(); \ - pr_reg[16] = 0 /* regs->orig_d0 */; \ - pr_reg[17] = regs->sr; \ - pr_reg[18] = regs->pc; \ - /* pr_reg[19] = (regs->format << 12) | regs->vector; */ \ - { \ - struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \ - pr_reg[5] = sw->d6; \ - pr_reg[6] = sw->d7; \ - pr_reg[10] = sw->a3; \ - pr_reg[11] = sw->a4; \ - pr_reg[12] = sw->a5; \ - pr_reg[13] = sw->a6; \ - } - -/* This yields a mask that user programs can use to figure out what - instruction set this cpu supports. */ - -#define ELF_HWCAP (0) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. */ - -#define ELF_PLATFORM (NULL) - -#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) - -#endif diff --git a/include/asm-m68knommu/elia.h b/include/asm-m68knommu/elia.h deleted file mode 100644 index e037d4e2de33..000000000000 --- a/include/asm-m68knommu/elia.h +++ /dev/null @@ -1,41 +0,0 @@ -/****************************************************************************/ - -/* - * elia.h -- Lineo (formerly Moreton Bay) eLIA platform support. - * - * (C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au) - * (C) Copyright 1999-2000, Lineo (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef elia_h -#define elia_h -/****************************************************************************/ - -#include - -#ifdef CONFIG_eLIA - -/* - * The serial port DTR and DCD lines are also on the Parallel I/O - * as well, so define those too. - */ - -#define eLIA_DCD1 0x0001 -#define eLIA_DCD0 0x0002 -#define eLIA_DTR1 0x0004 -#define eLIA_DTR0 0x0008 - -#define eLIA_PCIRESET 0x0020 - -/* - * Kernel macros to set and unset the LEDs. - */ -#ifndef __ASSEMBLY__ -extern unsigned short ppdata; -#endif /* __ASSEMBLY__ */ - -#endif /* CONFIG_eLIA */ - -/****************************************************************************/ -#endif /* elia_h */ diff --git a/include/asm-m68knommu/emergency-restart.h b/include/asm-m68knommu/emergency-restart.h deleted file mode 100644 index 108d8c48e42e..000000000000 --- a/include/asm-m68knommu/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-m68knommu/entry.h b/include/asm-m68knommu/entry.h deleted file mode 100644 index c2553d26273d..000000000000 --- a/include/asm-m68knommu/entry.h +++ /dev/null @@ -1,182 +0,0 @@ -#ifndef __M68KNOMMU_ENTRY_H -#define __M68KNOMMU_ENTRY_H - -#include -#include - -/* - * Stack layout in 'ret_from_exception': - * - * This allows access to the syscall arguments in registers d1-d5 - * - * 0(sp) - d1 - * 4(sp) - d2 - * 8(sp) - d3 - * C(sp) - d4 - * 10(sp) - d5 - * 14(sp) - a0 - * 18(sp) - a1 - * 1C(sp) - a2 - * 20(sp) - d0 - * 24(sp) - orig_d0 - * 28(sp) - stack adjustment - * 2C(sp) - [ sr ] [ format & vector ] - * 2E(sp) - [ pc-hiword ] [ sr ] - * 30(sp) - [ pc-loword ] [ pc-hiword ] - * 32(sp) - [ format & vector ] [ pc-loword ] - * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^ - * M68K COLDFIRE - */ - -#define ALLOWINT 0xf8ff - -#ifdef __ASSEMBLY__ - -/* process bits for task_struct.flags */ -PF_TRACESYS_OFF = 3 -PF_TRACESYS_BIT = 5 -PF_PTRACED_OFF = 3 -PF_PTRACED_BIT = 4 -PF_DTRACE_OFF = 1 -PF_DTRACE_BIT = 5 - -LENOSYS = 38 - -#define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */ - -/* - * This defines the normal kernel pt-regs layout. - * - * regs are a2-a6 and d6-d7 preserved by C code - * the kernel doesn't mess with usp unless it needs to - */ - -#ifdef CONFIG_COLDFIRE -/* - * This is made a little more tricky on the ColdFire. There is no - * separate kernel and user stack pointers. Need to artificially - * construct a usp in software... When doing this we need to disable - * interrupts, otherwise bad things could happen. - */ -.macro SAVE_ALL - move #0x2700,%sr /* disable intrs */ - btst #5,%sp@(2) /* from user? */ - bnes 6f /* no, skip */ - movel %sp,sw_usp /* save user sp */ - addql #8,sw_usp /* remove exception */ - movel sw_ksp,%sp /* kernel sp */ - subql #8,%sp /* room for exception */ - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ - movel sw_usp,%a0 /* get usp */ - movel %a0@-,%sp@(PT_PC) /* copy exception program counter */ - movel %a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */ - bra 7f - 6: - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ - 7: -.endm - -.macro RESTORE_ALL - btst #5,%sp@(PT_SR) /* going user? */ - bnes 8f /* no, skip */ - move #0x2700,%sr /* disable intrs */ - movel sw_usp,%a0 /* get usp */ - movel %sp@(PT_PC),%a0@- /* copy exception program counter */ - movel %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */ - moveml %sp@,%d1-%d5/%a0-%a2 - lea %sp@(32),%sp /* space for 8 regs */ - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - addql #8,%sp /* remove exception */ - movel %sp,sw_ksp /* save ksp */ - subql #8,sw_usp /* set exception */ - movel sw_usp,%sp /* restore usp */ - rte - 8: - moveml %sp@,%d1-%d5/%a0-%a2 - lea %sp@(32),%sp /* space for 8 regs */ - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - rte -.endm - -/* - * Quick exception save, use current stack only. - */ -.macro SAVE_LOCAL - move #0x2700,%sr /* disable intrs */ - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ -.endm - -.macro RESTORE_LOCAL - moveml %sp@,%d1-%d5/%a0-%a2 - lea %sp@(32),%sp /* space for 8 regs */ - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - rte -.endm - -.macro SAVE_SWITCH_STACK - lea %sp@(-24),%sp /* 6 regs */ - moveml %a3-%a6/%d6-%d7,%sp@ -.endm - -.macro RESTORE_SWITCH_STACK - moveml %sp@,%a3-%a6/%d6-%d7 - lea %sp@(24),%sp /* 6 regs */ -.endm - -/* - * Software copy of the user and kernel stack pointers... Ugh... - * Need these to get around ColdFire not having separate kernel - * and user stack pointers. - */ -.globl sw_usp -.globl sw_ksp - -#else /* !CONFIG_COLDFIRE */ - -/* - * Standard 68k interrupt entry and exit macros. - */ -.macro SAVE_ALL - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - moveml %d1-%d5/%a0-%a2,%sp@- -.endm - -.macro RESTORE_ALL - moveml %sp@+,%a0-%a2/%d1-%d5 - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - rte -.endm - -.macro SAVE_SWITCH_STACK - moveml %a3-%a6/%d6-%d7,%sp@- -.endm - -.macro RESTORE_SWITCH_STACK - moveml %sp@+,%a3-%a6/%d6-%d7 -.endm - -#endif /* !CONFIG_COLDFIRE */ -#endif /* __ASSEMBLY__ */ -#endif /* __M68KNOMMU_ENTRY_H */ diff --git a/include/asm-m68knommu/errno.h b/include/asm-m68knommu/errno.h deleted file mode 100644 index 7e8c22b9a5e6..000000000000 --- a/include/asm-m68knommu/errno.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/fb.h b/include/asm-m68knommu/fb.h deleted file mode 100644 index c7df38030992..000000000000 --- a/include/asm-m68knommu/fb.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ -#include - -#define fb_pgprotect(...) do {} while (0) - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-m68knommu/fcntl.h b/include/asm-m68knommu/fcntl.h deleted file mode 100644 index f6a552cda4cd..000000000000 --- a/include/asm-m68knommu/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/flat.h b/include/asm-m68knommu/flat.h deleted file mode 100644 index 814b5174a8e0..000000000000 --- a/include/asm-m68knommu/flat.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-m68knommu/flat.h -- uClinux flat-format executables - */ - -#ifndef __M68KNOMMU_FLAT_H__ -#define __M68KNOMMU_FLAT_H__ - -#define flat_stack_align(sp) /* nothing needed */ -#define flat_argvp_envp_on_stack() 1 -#define flat_old_ram_flag(flags) (flags) -#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp) -#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) -#define flat_get_relocate_addr(rel) (rel) -#define flat_set_persistent(relval, p) 0 - -#endif /* __M68KNOMMU_FLAT_H__ */ diff --git a/include/asm-m68knommu/fpu.h b/include/asm-m68knommu/fpu.h deleted file mode 100644 index b16b2e4fca2a..000000000000 --- a/include/asm-m68knommu/fpu.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __M68KNOMMU_FPU_H -#define __M68KNOMMU_FPU_H - - -/* - * MAX floating point unit state size (FSAVE/FRESTORE) - */ -#if defined(CONFIG_M68020) || defined(CONFIG_M68030) -#define FPSTATESIZE (216/sizeof(unsigned char)) -#elif defined(CONFIG_M68040) -#define FPSTATESIZE (96/sizeof(unsigned char)) -#elif defined(CONFIG_M68KFPU_EMU) -#define FPSTATESIZE (28/sizeof(unsigned char)) -#elif defined(CONFIG_M68060) -#define FPSTATESIZE (12/sizeof(unsigned char)) -#else -/* Assume no FP unit present then... */ -#define FPSTATESIZE (2) /* dummy size */ -#endif - -#endif /* __M68K_FPU_H */ diff --git a/include/asm-m68knommu/futex.h b/include/asm-m68knommu/futex.h deleted file mode 100644 index 6a332a9f099c..000000000000 --- a/include/asm-m68knommu/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include - -#endif diff --git a/include/asm-m68knommu/hardirq.h b/include/asm-m68knommu/hardirq.h deleted file mode 100644 index bfad28149a49..000000000000 --- a/include/asm-m68knommu/hardirq.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __M68K_HARDIRQ_H -#define __M68K_HARDIRQ_H - -#include -#include -#include - -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -#define HARDIRQ_BITS 8 - -/* - * The hardirq mask has to be large enough to have - * space for potentially all IRQ sources in the system - * nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -void ack_bad_irq(unsigned int irq); - -#endif /* __M68K_HARDIRQ_H */ diff --git a/include/asm-m68knommu/hw_irq.h b/include/asm-m68knommu/hw_irq.h deleted file mode 100644 index f3ec9e5ae049..000000000000 --- a/include/asm-m68knommu/hw_irq.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __M68KNOMMU_HW_IRQ_H__ -#define __M68KNOMMU_HW_IRQ_H__ - -#endif /* __M68KNOMMU_HW_IRQ_H__ */ diff --git a/include/asm-m68knommu/hwtest.h b/include/asm-m68knommu/hwtest.h deleted file mode 100644 index 700626a1b1bf..000000000000 --- a/include/asm-m68knommu/hwtest.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/io.h b/include/asm-m68knommu/io.h deleted file mode 100644 index 6adef1ee2082..000000000000 --- a/include/asm-m68knommu/io.h +++ /dev/null @@ -1,194 +0,0 @@ -#ifndef _M68KNOMMU_IO_H -#define _M68KNOMMU_IO_H - -#ifdef __KERNEL__ - - -/* - * These are for ISA/PCI shared memory _only_ and should never be used - * on any other type of memory, including Zorro memory. They are meant to - * access the bus in the bus byte order which is little-endian!. - * - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the m68k architecture, we just read/write the - * memory location directly. - */ -/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates - * two accesses to memory, which may be undesireable for some devices. - */ - -/* - * swap functions are sometimes needed to interface little-endian hardware - */ -static inline unsigned short _swapw(volatile unsigned short v) -{ - return ((v << 8) | (v >> 8)); -} - -static inline unsigned int _swapl(volatile unsigned long v) -{ - return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24)); -} - -#define readb(addr) \ - ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; }) -#define readw(addr) \ - ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; }) -#define readl(addr) \ - ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; }) - -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) - -#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) -#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) -#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) - -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel - -static inline void io_outsb(unsigned int addr, void *buf, int len) -{ - volatile unsigned char *ap = (volatile unsigned char *) addr; - unsigned char *bp = (unsigned char *) buf; - while (len--) - *ap = *bp++; -} - -static inline void io_outsw(unsigned int addr, void *buf, int len) -{ - volatile unsigned short *ap = (volatile unsigned short *) addr; - unsigned short *bp = (unsigned short *) buf; - while (len--) - *ap = _swapw(*bp++); -} - -static inline void io_outsl(unsigned int addr, void *buf, int len) -{ - volatile unsigned int *ap = (volatile unsigned int *) addr; - unsigned int *bp = (unsigned int *) buf; - while (len--) - *ap = _swapl(*bp++); -} - -static inline void io_insb(unsigned int addr, void *buf, int len) -{ - volatile unsigned char *ap = (volatile unsigned char *) addr; - unsigned char *bp = (unsigned char *) buf; - while (len--) - *bp++ = *ap; -} - -static inline void io_insw(unsigned int addr, void *buf, int len) -{ - volatile unsigned short *ap = (volatile unsigned short *) addr; - unsigned short *bp = (unsigned short *) buf; - while (len--) - *bp++ = _swapw(*ap); -} - -static inline void io_insl(unsigned int addr, void *buf, int len) -{ - volatile unsigned int *ap = (volatile unsigned int *) addr; - unsigned int *bp = (unsigned int *) buf; - while (len--) - *bp++ = _swapl(*ap); -} - -#define mmiowb() - -/* - * make the short names macros so specific devices - * can override them as required - */ - -#define memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) - -#define inb(addr) readb(addr) -#define inw(addr) readw(addr) -#define inl(addr) readl(addr) -#define outb(x,addr) ((void) writeb(x,addr)) -#define outw(x,addr) ((void) writew(x,addr)) -#define outl(x,addr) ((void) writel(x,addr)) - -#define inb_p(addr) inb(addr) -#define inw_p(addr) inw(addr) -#define inl_p(addr) inl(addr) -#define outb_p(x,addr) outb(x,addr) -#define outw_p(x,addr) outw(x,addr) -#define outl_p(x,addr) outl(x,addr) - -#define outsb(a,b,l) io_outsb(a,b,l) -#define outsw(a,b,l) io_outsw(a,b,l) -#define outsl(a,b,l) io_outsl(a,b,l) - -#define insb(a,b,l) io_insb(a,b,l) -#define insw(a,b,l) io_insw(a,b,l) -#define insl(a,b,l) io_insl(a,b,l) - -#define IO_SPACE_LIMIT 0xffff - - -/* Values for nocacheflag and cmode */ -#define IOMAP_FULL_CACHING 0 -#define IOMAP_NOCACHE_SER 1 -#define IOMAP_NOCACHE_NONSER 2 -#define IOMAP_WRITETHROUGH 3 - -extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); -extern void __iounmap(void *addr, unsigned long size); - -static inline void *ioremap(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} -static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} -static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); -} -static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_FULL_CACHING); -} - -extern void iounmap(void *addr); - -/* Pages to physical address... */ -#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) -#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) - -/* - * Macros used for converting between virtual and physical mappings. - */ -#define phys_to_virt(vaddr) ((void *) (vaddr)) -#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) - -#define virt_to_bus virt_to_phys -#define bus_to_virt phys_to_virt - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* __KERNEL__ */ - -#endif /* _M68KNOMMU_IO_H */ diff --git a/include/asm-m68knommu/ioctl.h b/include/asm-m68knommu/ioctl.h deleted file mode 100644 index b279fe06dfe5..000000000000 --- a/include/asm-m68knommu/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/ioctls.h b/include/asm-m68knommu/ioctls.h deleted file mode 100644 index 0b1eb4d85059..000000000000 --- a/include/asm-m68knommu/ioctls.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/ipcbuf.h b/include/asm-m68knommu/ipcbuf.h deleted file mode 100644 index e4a7be6dd706..000000000000 --- a/include/asm-m68knommu/ipcbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/irq.h b/include/asm-m68knommu/irq.h deleted file mode 100644 index 9373c31ac87d..000000000000 --- a/include/asm-m68knommu/irq.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _M68KNOMMU_IRQ_H_ -#define _M68KNOMMU_IRQ_H_ - -#ifdef CONFIG_COLDFIRE -/* - * On the ColdFire we keep track of all vectors. That way drivers - * can register whatever vector number they wish, and we can deal - * with it. - */ -#define SYS_IRQS 256 -#define NR_IRQS SYS_IRQS - -#else - -/* - * # of m68k interrupts - */ -#define SYS_IRQS 8 -#define NR_IRQS (24 + SYS_IRQS) - -#endif /* CONFIG_COLDFIRE */ - - -#define irq_canonicalize(irq) (irq) - -#endif /* _M68KNOMMU_IRQ_H_ */ diff --git a/include/asm-m68knommu/irq_regs.h b/include/asm-m68knommu/irq_regs.h deleted file mode 100644 index 3dd9c0b70270..000000000000 --- a/include/asm-m68knommu/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/kdebug.h b/include/asm-m68knommu/kdebug.h deleted file mode 100644 index 6ece1b037665..000000000000 --- a/include/asm-m68knommu/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/kmap_types.h b/include/asm-m68knommu/kmap_types.h deleted file mode 100644 index bfb6707575d1..000000000000 --- a/include/asm-m68knommu/kmap_types.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_M68K_KMAP_TYPES_H -#define __ASM_M68K_KMAP_TYPES_H - -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_TYPE_NR -}; - -#endif diff --git a/include/asm-m68knommu/linkage.h b/include/asm-m68knommu/linkage.h deleted file mode 100644 index c288a19ff489..000000000000 --- a/include/asm-m68knommu/linkage.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/local.h b/include/asm-m68knommu/local.h deleted file mode 100644 index 84a39c1b86f8..000000000000 --- a/include/asm-m68knommu/local.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68KNOMMU_LOCAL_H -#define __M68KNOMMU_LOCAL_H - -#include - -#endif /* __M68KNOMMU_LOCAL_H */ diff --git a/include/asm-m68knommu/m5206sim.h b/include/asm-m68knommu/m5206sim.h deleted file mode 100644 index 7e3594dea88b..000000000000 --- a/include/asm-m68knommu/m5206sim.h +++ /dev/null @@ -1,131 +0,0 @@ -/****************************************************************************/ - -/* - * m5206sim.h -- ColdFire 5206 System Integration Module support. - * - * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef m5206sim_h -#define m5206sim_h -/****************************************************************************/ - - -/* - * Define the 5206 SIM register set addresses. - */ -#define MCFSIM_SIMR 0x03 /* SIM Config reg (r/w) */ -#define MCFSIM_ICR1 0x14 /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x15 /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x16 /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x17 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x18 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x19 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x1a /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x1b /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x1c /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x1d /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x1e /* Intr Ctrl reg 11 (r/w) */ -#define MCFSIM_ICR12 0x1f /* Intr Ctrl reg 12 (r/w) */ -#define MCFSIM_ICR13 0x20 /* Intr Ctrl reg 13 (r/w) */ -#ifdef CONFIG_M5206e -#define MCFSIM_ICR14 0x21 /* Intr Ctrl reg 14 (r/w) */ -#define MCFSIM_ICR15 0x22 /* Intr Ctrl reg 15 (r/w) */ -#endif - -#define MCFSIM_IMR 0x36 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_IPR 0x3a /* Interrupt Pend reg (r/w) */ - -#define MCFSIM_RSR 0x40 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x41 /* System Protection reg (r/w)*/ - -#define MCFSIM_SWIVR 0x42 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x43 /* SW Watchdog service (r/w) */ - -#define MCFSIM_DCRR 0x46 /* DRAM Refresh reg (r/w) */ -#define MCFSIM_DCTR 0x4a /* DRAM Timing reg (r/w) */ -#define MCFSIM_DAR0 0x4c /* DRAM 0 Address reg(r/w) */ -#define MCFSIM_DMR0 0x50 /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DCR0 0x57 /* DRAM 0 Control reg (r/w) */ -#define MCFSIM_DAR1 0x58 /* DRAM 1 Address reg (r/w) */ -#define MCFSIM_DMR1 0x5c /* DRAM 1 Mask reg (r/w) */ -#define MCFSIM_DCR1 0x63 /* DRAM 1 Control reg (r/w) */ - -#define MCFSIM_CSAR0 0x64 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x68 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x6e /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x70 /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x74 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x7a /* CS 1 Control reg (r/w) */ -#define MCFSIM_CSAR2 0x7c /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x80 /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0x86 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0x88 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0x8c /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0x92 /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSAR4 0x94 /* CS 4 Address reg (r/w) */ -#define MCFSIM_CSMR4 0x98 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0x9e /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSAR5 0xa0 /* CS 5 Address reg (r/w) */ -#define MCFSIM_CSMR5 0xa4 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xaa /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSAR6 0xac /* CS 6 Address reg (r/w) */ -#define MCFSIM_CSMR6 0xb0 /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xb6 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSAR7 0xb8 /* CS 7 Address reg (r/w) */ -#define MCFSIM_CSMR7 0xbc /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xc2 /* CS 7 Control reg (r/w) */ -#define MCFSIM_DMCR 0xc6 /* Default control */ - -#ifdef CONFIG_M5206e -#define MCFSIM_PAR 0xca /* Pin Assignment reg (r/w) */ -#else -#define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */ -#endif - -#define MCFSIM_PADDR 0x1c5 /* Parallel Direction (r/w) */ -#define MCFSIM_PADAT 0x1c9 /* Parallel Port Value (r/w) */ - -/* - * Some symbol defines for the Parallel Port Pin Assignment Register - */ -#ifdef CONFIG_M5206e -#define MCFSIM_PAR_DREQ0 0x100 /* Set to select DREQ0 input */ - /* Clear to select T0 input */ -#define MCFSIM_PAR_DREQ1 0x200 /* Select DREQ1 input */ - /* Clear to select T0 output */ -#endif - -/* - * Some symbol defines for the Interrupt Control Register - */ -#define MCFSIM_SWDICR MCFSIM_ICR8 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR9 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR10 /* Timer 2 ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR12 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR13 /* UART 2 ICR */ -#ifdef CONFIG_M5206e -#define MCFSIM_DMA1ICR MCFSIM_ICR14 /* DMA 1 ICR */ -#define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */ -#endif - -#if defined(CONFIG_M5206e) -#define MCFSIM_IMR_MASKALL 0xfffe /* All SIM intr sources */ -#endif - -/* - * Macro to get and set IMR register. It is 16 bits on the 5206. - */ -#define mcf_getimr() \ - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr) - -#define mcf_getipr() \ - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR)) - -/****************************************************************************/ -#endif /* m5206sim_h */ diff --git a/include/asm-m68knommu/m520xsim.h b/include/asm-m68knommu/m520xsim.h deleted file mode 100644 index 49d016e6391a..000000000000 --- a/include/asm-m68knommu/m520xsim.h +++ /dev/null @@ -1,63 +0,0 @@ -/****************************************************************************/ - -/* - * m520xsim.h -- ColdFire 5207/5208 System Integration Module support. - * - * (C) Copyright 2005, Intec Automation (mike@steroidmicros.com) - */ - -/****************************************************************************/ -#ifndef m520xsim_h -#define m520xsim_h -/****************************************************************************/ - - -/* - * Define the 5282 SIM register set addresses. - */ -#define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */ -#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ -#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ -#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ -#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ -#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ -#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ -#define MCFINTC_ICR0 0x40 /* Base ICR register */ - -#define MCFINT_VECBASE 64 -#define MCFINT_UART0 26 /* Interrupt number for UART0 */ -#define MCFINT_UART1 27 /* Interrupt number for UART1 */ -#define MCFINT_UART2 28 /* Interrupt number for UART2 */ -#define MCFINT_QSPI 31 /* Interrupt number for QSPI */ -#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */ - -/* - * SDRAM configuration registers. - */ -#define MCFSIM_SDMR 0x000a8000 /* SDRAM Mode/Extended Mode Register */ -#define MCFSIM_SDCR 0x000a8004 /* SDRAM Control Register */ -#define MCFSIM_SDCFG1 0x000a8008 /* SDRAM Configuration Register 1 */ -#define MCFSIM_SDCFG2 0x000a800c /* SDRAM Configuration Register 2 */ -#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */ -#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */ - - -#define MCF_GPIO_PAR_UART (0xA4036) -#define MCF_GPIO_PAR_FECI2C (0xA4033) -#define MCF_GPIO_PAR_FEC (0xA4038) - -#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001) -#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0002) - -#define MCF_GPIO_PAR_UART_PAR_URXD1 (0x0040) -#define MCF_GPIO_PAR_UART_PAR_UTXD1 (0x0080) - -#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) -#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) - -#define ICR_INTRCONF 0x05 -#define MCFPIT_IMR MCFINTC_IMRL -#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1) - -/****************************************************************************/ -#endif /* m520xsim_h */ diff --git a/include/asm-m68knommu/m523xsim.h b/include/asm-m68knommu/m523xsim.h deleted file mode 100644 index bf397313e93f..000000000000 --- a/include/asm-m68knommu/m523xsim.h +++ /dev/null @@ -1,45 +0,0 @@ -/****************************************************************************/ - -/* - * m523xsim.h -- ColdFire 523x System Integration Module support. - * - * (C) Copyright 2003-2005, Greg Ungerer - */ - -/****************************************************************************/ -#ifndef m523xsim_h -#define m523xsim_h -/****************************************************************************/ - - -/* - * Define the 523x SIM register set addresses. - */ -#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ -#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */ -#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ -#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ -#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ -#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ -#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ -#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ -#define MCFINTC_IRLR 0x18 /* */ -#define MCFINTC_IACKL 0x19 /* */ -#define MCFINTC_ICR0 0x40 /* Base ICR register */ - -#define MCFINT_VECBASE 64 /* Vector base number */ -#define MCFINT_UART0 13 /* Interrupt number for UART0 */ -#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ -#define MCFINT_QSPI 18 /* Interrupt number for QSPI */ - -/* - * SDRAM configuration registers. - */ -#define MCFSIM_DCR 0x44 /* SDRAM control */ -#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ -#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ -#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ -#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ - -/****************************************************************************/ -#endif /* m523xsim_h */ diff --git a/include/asm-m68knommu/m5249sim.h b/include/asm-m68knommu/m5249sim.h deleted file mode 100644 index 366eb8602d2f..000000000000 --- a/include/asm-m68knommu/m5249sim.h +++ /dev/null @@ -1,209 +0,0 @@ -/****************************************************************************/ - -/* - * m5249sim.h -- ColdFire 5249 System Integration Module support. - * - * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) - */ - -/****************************************************************************/ -#ifndef m5249sim_h -#define m5249sim_h -/****************************************************************************/ - -/* - * Define the 5249 SIM register set addresses. - */ -#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ -#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ -#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ -#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ -#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ -#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ -#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ -#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ - -#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ -#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ - -#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ -#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ - - -/* - * Some symbol defines for the above... - */ -#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ -#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ -#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ -#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ -#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ - -/* - * General purpose IO registers (in MBAR2). - */ -#define MCFSIM2_GPIOREAD 0x0 /* GPIO read values */ -#define MCFSIM2_GPIOWRITE 0x4 /* GPIO write values */ -#define MCFSIM2_GPIOENABLE 0x8 /* GPIO enabled */ -#define MCFSIM2_GPIOFUNC 0xc /* GPIO function */ -#define MCFSIM2_GPIO1READ 0xb0 /* GPIO1 read values */ -#define MCFSIM2_GPIO1WRITE 0xb4 /* GPIO1 write values */ -#define MCFSIM2_GPIO1ENABLE 0xb8 /* GPIO1 enabled */ -#define MCFSIM2_GPIO1FUNC 0xbc /* GPIO1 function */ - -#define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */ -#define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */ -#define MCFSIM2_GPIOINTENABLE 0xc4 /* GPIO interrupt enable */ - -#define MCFSIM2_INTLEVEL1 0x140 /* Interrupt level reg 1 */ -#define MCFSIM2_INTLEVEL2 0x144 /* Interrupt level reg 2 */ -#define MCFSIM2_INTLEVEL3 0x148 /* Interrupt level reg 3 */ -#define MCFSIM2_INTLEVEL4 0x14c /* Interrupt level reg 4 */ -#define MCFSIM2_INTLEVEL5 0x150 /* Interrupt level reg 5 */ -#define MCFSIM2_INTLEVEL6 0x154 /* Interrupt level reg 6 */ -#define MCFSIM2_INTLEVEL7 0x158 /* Interrupt level reg 7 */ -#define MCFSIM2_INTLEVEL8 0x15c /* Interrupt level reg 8 */ - -#define MCFSIM2_DMAROUTE 0x188 /* DMA routing */ - -#define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */ -#define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */ - - -/* - * Macro to set IMR register. It is 32 bits on the 5249. - */ -#define MCFSIM_IMR_MASKALL 0x7fffe /* All SIM intr sources */ - -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - -/****************************************************************************/ - -#ifdef __ASSEMBLER__ - -/* - * The M5249C3 board needs a little help getting all its SIM devices - * initialized at kernel start time. dBUG doesn't set much up, so - * we need to do it manually. - */ -.macro m5249c3_setup - /* - * Set MBAR1 and MBAR2, just incase they are not set. - */ - movel #0x10000001,%a0 - movec %a0,%MBAR /* map MBAR region */ - subql #1,%a0 /* get MBAR address in a0 */ - - movel #0x80000001,%a1 - movec %a1,#3086 /* map MBAR2 region */ - subql #1,%a1 /* get MBAR2 address in a1 */ - - /* - * Move secondary interrupts to base at 128. - */ - moveb #0x80,%d0 - moveb %d0,0x16b(%a1) /* interrupt base register */ - - /* - * Work around broken CSMR0/DRAM vector problem. - */ - movel #0x001F0021,%d0 /* disable C/I bit */ - movel %d0,0x84(%a0) /* set CSMR0 */ - - /* - * Disable the PLL firstly. (Who knows what state it is - * in here!). - */ - movel 0x180(%a1),%d0 /* get current PLL value */ - andl #0xfffffffe,%d0 /* PLL bypass first */ - movel %d0,0x180(%a1) /* set PLL register */ - nop - -#if CONFIG_CLOCK_FREQ == 140000000 - /* - * Set initial clock frequency. This assumes M5249C3 board - * is fitted with 11.2896MHz crystal. It will program the - * PLL for 140MHz. Lets go fast :-) - */ - movel #0x125a40f0,%d0 /* set for 140MHz */ - movel %d0,0x180(%a1) /* set PLL register */ - orl #0x1,%d0 - movel %d0,0x180(%a1) /* set PLL register */ -#endif - - /* - * Setup CS1 for ethernet controller. - * (Setup as per M5249C3 doco). - */ - movel #0xe0000000,%d0 /* CS1 mapped at 0xe0000000 */ - movel %d0,0x8c(%a0) - movel #0x001f0021,%d0 /* CS1 size of 1Mb */ - movel %d0,0x90(%a0) - movew #0x0080,%d0 /* CS1 = 16bit port, AA */ - movew %d0,0x96(%a0) - - /* - * Setup CS2 for IDE interface. - */ - movel #0x50000000,%d0 /* CS2 mapped at 0x50000000 */ - movel %d0,0x98(%a0) - movel #0x001f0001,%d0 /* CS2 size of 1MB */ - movel %d0,0x9c(%a0) - movew #0x0080,%d0 /* CS2 = 16bit, TA */ - movew %d0,0xa2(%a0) - - movel #0x00107000,%d0 /* IDEconfig1 */ - movel %d0,0x18c(%a1) - movel #0x000c0400,%d0 /* IDEconfig2 */ - movel %d0,0x190(%a1) - - movel #0x00080000,%d0 /* GPIO19, IDE reset bit */ - orl %d0,0xc(%a1) /* function GPIO19 */ - orl %d0,0x8(%a1) /* enable GPIO19 as output */ - orl %d0,0x4(%a1) /* de-assert IDE reset */ -.endm - -#define PLATFORM_SETUP m5249c3_setup - -#endif /* __ASSEMBLER__ */ - -/****************************************************************************/ -#endif /* m5249sim_h */ diff --git a/include/asm-m68knommu/m5272sim.h b/include/asm-m68knommu/m5272sim.h deleted file mode 100644 index 6217edc21139..000000000000 --- a/include/asm-m68knommu/m5272sim.h +++ /dev/null @@ -1,78 +0,0 @@ -/****************************************************************************/ - -/* - * m5272sim.h -- ColdFire 5272 System Integration Module support. - * - * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef m5272sim_h -#define m5272sim_h -/****************************************************************************/ - - -/* - * Define the 5272 SIM register set addresses. - */ -#define MCFSIM_SCR 0x04 /* SIM Config reg (r/w) */ -#define MCFSIM_SPR 0x06 /* System Protection reg (r/w)*/ -#define MCFSIM_PMR 0x08 /* Power Management reg (r/w) */ -#define MCFSIM_APMR 0x0e /* Active Low Power reg (r/w) */ -#define MCFSIM_DIR 0x10 /* Device Identity reg (r/w) */ - -#define MCFSIM_ICR1 0x20 /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x24 /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x28 /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x2c /* Intr Ctrl reg 4 (r/w) */ - -#define MCFSIM_ISR 0x30 /* Interrupt Source reg (r/w) */ -#define MCFSIM_PITR 0x34 /* Interrupt Transition (r/w) */ -#define MCFSIM_PIWR 0x38 /* Interrupt Wakeup reg (r/w) */ -#define MCFSIM_PIVR 0x3f /* Interrupt Vector reg (r/w( */ - -#define MCFSIM_WRRR 0x280 /* Watchdog reference (r/w) */ -#define MCFSIM_WIRR 0x284 /* Watchdog interrupt (r/w) */ -#define MCFSIM_WCR 0x288 /* Watchdog counter (r/w) */ -#define MCFSIM_WER 0x28c /* Watchdog event (r/w) */ - -#define MCFSIM_CSBR0 0x40 /* CS0 Base Address (r/w) */ -#define MCFSIM_CSOR0 0x44 /* CS0 Option (r/w) */ -#define MCFSIM_CSBR1 0x48 /* CS1 Base Address (r/w) */ -#define MCFSIM_CSOR1 0x4c /* CS1 Option (r/w) */ -#define MCFSIM_CSBR2 0x50 /* CS2 Base Address (r/w) */ -#define MCFSIM_CSOR2 0x54 /* CS2 Option (r/w) */ -#define MCFSIM_CSBR3 0x58 /* CS3 Base Address (r/w) */ -#define MCFSIM_CSOR3 0x5c /* CS3 Option (r/w) */ -#define MCFSIM_CSBR4 0x60 /* CS4 Base Address (r/w) */ -#define MCFSIM_CSOR4 0x64 /* CS4 Option (r/w) */ -#define MCFSIM_CSBR5 0x68 /* CS5 Base Address (r/w) */ -#define MCFSIM_CSOR5 0x6c /* CS5 Option (r/w) */ -#define MCFSIM_CSBR6 0x70 /* CS6 Base Address (r/w) */ -#define MCFSIM_CSOR6 0x74 /* CS6 Option (r/w) */ -#define MCFSIM_CSBR7 0x78 /* CS7 Base Address (r/w) */ -#define MCFSIM_CSOR7 0x7c /* CS7 Option (r/w) */ - -#define MCFSIM_SDCR 0x180 /* SDRAM Configuration (r/w) */ -#define MCFSIM_SDTR 0x184 /* SDRAM Timing (r/w) */ -#define MCFSIM_DCAR0 0x4c /* DRAM 0 Address reg(r/w) */ -#define MCFSIM_DCMR0 0x50 /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DCCR0 0x57 /* DRAM 0 Control reg (r/w) */ -#define MCFSIM_DCAR1 0x58 /* DRAM 1 Address reg (r/w) */ -#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ -#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ - -#define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */ -#define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */ -#define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */ -#define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */ -#define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */ -#define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */ -#define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */ -#define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */ -#define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */ - - -/****************************************************************************/ -#endif /* m5272sim_h */ diff --git a/include/asm-m68knommu/m527xsim.h b/include/asm-m68knommu/m527xsim.h deleted file mode 100644 index 1f63ab3fb3e6..000000000000 --- a/include/asm-m68knommu/m527xsim.h +++ /dev/null @@ -1,74 +0,0 @@ -/****************************************************************************/ - -/* - * m527xsim.h -- ColdFire 5270/5271 System Integration Module support. - * - * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com) - */ - -/****************************************************************************/ -#ifndef m527xsim_h -#define m527xsim_h -/****************************************************************************/ - - -/* - * Define the 5270/5271 SIM register set addresses. - */ -#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ -#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */ -#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ -#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ -#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ -#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ -#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ -#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ -#define MCFINTC_IRLR 0x18 /* */ -#define MCFINTC_IACKL 0x19 /* */ -#define MCFINTC_ICR0 0x40 /* Base ICR register */ - -#define MCFINT_VECBASE 64 /* Vector base number */ -#define MCFINT_UART0 13 /* Interrupt number for UART0 */ -#define MCFINT_UART1 14 /* Interrupt number for UART1 */ -#define MCFINT_UART2 15 /* Interrupt number for UART2 */ -#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ - -/* - * SDRAM configuration registers. - */ -#ifdef CONFIG_M5271 -#define MCFSIM_DCR 0x40 /* SDRAM control */ -#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ -#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ -#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ -#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ -#endif -#ifdef CONFIG_M5275 -#define MCFSIM_DMR 0x40 /* SDRAM mode */ -#define MCFSIM_DCR 0x44 /* SDRAM control */ -#define MCFSIM_DCFG1 0x48 /* SDRAM configuration 1 */ -#define MCFSIM_DCFG2 0x4c /* SDRAM configuration 2 */ -#define MCFSIM_DBAR0 0x50 /* SDRAM base address 0 */ -#define MCFSIM_DMR0 0x54 /* SDRAM address mask 0 */ -#define MCFSIM_DBAR1 0x58 /* SDRAM base address 1 */ -#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */ -#endif - -/* - * GPIO pins setups to enable the UARTs. - */ -#ifdef CONFIG_M5271 -#define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */ -#define UART0_ENABLE_MASK 0x000f -#define UART1_ENABLE_MASK 0x0ff0 -#define UART2_ENABLE_MASK 0x3000 -#endif -#ifdef CONFIG_M5275 -#define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */ -#define UART0_ENABLE_MASK 0x000f -#define UART1_ENABLE_MASK 0x00f0 -#define UART2_ENABLE_MASK 0x3f00 -#endif - -/****************************************************************************/ -#endif /* m527xsim_h */ diff --git a/include/asm-m68knommu/m528xsim.h b/include/asm-m68knommu/m528xsim.h deleted file mode 100644 index 28bf783a5d6d..000000000000 --- a/include/asm-m68knommu/m528xsim.h +++ /dev/null @@ -1,159 +0,0 @@ -/****************************************************************************/ - -/* - * m528xsim.h -- ColdFire 5280/5282 System Integration Module support. - * - * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com) - */ - -/****************************************************************************/ -#ifndef m528xsim_h -#define m528xsim_h -/****************************************************************************/ - - -/* - * Define the 5280/5282 SIM register set addresses. - */ -#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ -#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */ -#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ -#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ -#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ -#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ -#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ -#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ -#define MCFINTC_IRLR 0x18 /* */ -#define MCFINTC_IACKL 0x19 /* */ -#define MCFINTC_ICR0 0x40 /* Base ICR register */ - -#define MCFINT_VECBASE 64 /* Vector base number */ -#define MCFINT_UART0 13 /* Interrupt number for UART0 */ -#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */ - -/* - * SDRAM configuration registers. - */ -#define MCFSIM_DCR 0x44 /* SDRAM control */ -#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ -#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ -#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ -#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ - -/* - * Derek Cheung - 6 Feb 2005 - * add I2C and QSPI register definition using Freescale's MCF5282 - */ -/* set Port AS pin for I2C or UART */ -#define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056) - -/* Port UA Pin Assignment Register (8 Bit) */ -#define MCF5282_GPIO_PUAPAR 0x10005C - -/* Interrupt Mask Register Register Low */ -#define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C) -/* Interrupt Control Register 7 */ -#define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51) - - - -/********************************************************************* -* -* Inter-IC (I2C) Module -* -*********************************************************************/ -/* Read/Write access macros for general use */ -#define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address -#define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider -#define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control -#define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status -#define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O - -/* Bit level definitions and macros */ -#define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) - -#define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F)) - -#define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable -#define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable -#define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode -#define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode -#define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable -#define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start - -#define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit -#define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave -#define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy -#define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost -#define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write -#define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt -#define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge - - - -/********************************************************************* -* -* Queued Serial Peripheral Interface (QSPI) Module -* -*********************************************************************/ -/* Derek - 21 Feb 2005 */ -/* change to the format used in I2C */ -/* Read/Write access macros for general use */ -#define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340 -#define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344 -#define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348 -#define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C -#define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350 -#define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354 -#define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354 - -/* Bit level definitions and macros */ -#define MCF5282_QSPI_QMR_MSTR (0x8000) -#define MCF5282_QSPI_QMR_DOHIE (0x4000) -#define MCF5282_QSPI_QMR_BITS_16 (0x0000) -#define MCF5282_QSPI_QMR_BITS_8 (0x2000) -#define MCF5282_QSPI_QMR_BITS_9 (0x2400) -#define MCF5282_QSPI_QMR_BITS_10 (0x2800) -#define MCF5282_QSPI_QMR_BITS_11 (0x2C00) -#define MCF5282_QSPI_QMR_BITS_12 (0x3000) -#define MCF5282_QSPI_QMR_BITS_13 (0x3400) -#define MCF5282_QSPI_QMR_BITS_14 (0x3800) -#define MCF5282_QSPI_QMR_BITS_15 (0x3C00) -#define MCF5282_QSPI_QMR_CPOL (0x0200) -#define MCF5282_QSPI_QMR_CPHA (0x0100) -#define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF)) - -#define MCF5282_QSPI_QDLYR_SPE (0x80) -#define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) -#define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF)) - -#define MCF5282_QSPI_QWR_HALT (0x8000) -#define MCF5282_QSPI_QWR_WREN (0x4000) -#define MCF5282_QSPI_QWR_WRTO (0x2000) -#define MCF5282_QSPI_QWR_CSIV (0x1000) -#define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) -#define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4) -#define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F)) - -#define MCF5282_QSPI_QIR_WCEFB (0x8000) -#define MCF5282_QSPI_QIR_ABRTB (0x4000) -#define MCF5282_QSPI_QIR_ABRTL (0x1000) -#define MCF5282_QSPI_QIR_WCEFE (0x0800) -#define MCF5282_QSPI_QIR_ABRTE (0x0400) -#define MCF5282_QSPI_QIR_SPIFE (0x0100) -#define MCF5282_QSPI_QIR_WCEF (0x0008) -#define MCF5282_QSPI_QIR_ABRT (0x0004) -#define MCF5282_QSPI_QIR_SPIF (0x0001) - -#define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F)) - -#define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00)) -#define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8) -#define MCF5282_QSPI_QCR_CONT (0x8000) -#define MCF5282_QSPI_QCR_BITSE (0x4000) -#define MCF5282_QSPI_QCR_DT (0x2000) -#define MCF5282_QSPI_QCR_DSCK (0x1000) -#define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8) - -/****************************************************************************/ -#endif /* m528xsim_h */ diff --git a/include/asm-m68knommu/m5307sim.h b/include/asm-m68knommu/m5307sim.h deleted file mode 100644 index 5886728409c0..000000000000 --- a/include/asm-m68knommu/m5307sim.h +++ /dev/null @@ -1,181 +0,0 @@ -/****************************************************************************/ - -/* - * m5307sim.h -- ColdFire 5307 System Integration Module support. - * - * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd. - * (C) Copyright 1999, Lineo (www.lineo.com) - * - * Modified by David W. Miller for the MCF5307 Eval Board. - */ - -/****************************************************************************/ -#ifndef m5307sim_h -#define m5307sim_h -/****************************************************************************/ - -/* - * Define the 5307 SIM register set addresses. - */ -#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ -#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ -#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ -#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ -#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ -#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ -#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ -#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ -#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ - -#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ - -#ifdef CONFIG_OLDMASK -#define MCFSIM_CSBAR 0x98 /* CS Base Address reg (r/w) */ -#define MCFSIM_CSBAMR 0x9c /* CS Base Mask reg (r/w) */ -#define MCFSIM_CSMR2 0x9e /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSMR3 0xaa /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSMR4 0xb6 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSMR5 0xc2 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSMR6 0xce /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSMR7 0xda /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ -#else -#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ -#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */ -#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */ -#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */ -#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ -#endif /* CONFIG_OLDMASK */ - -#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ -#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ - -#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ -#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ - - -/* Definition offset address for CS2-7 -- old mask 5307 */ - -#define MCF5307_CS2 (0x400000) -#define MCF5307_CS3 (0x600000) -#define MCF5307_CS4 (0x800000) -#define MCF5307_CS5 (0xA00000) -#define MCF5307_CS6 (0xC00000) -#define MCF5307_CS7 (0xE00000) - - -/* - * Some symbol defines for the above... - */ -#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ -#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ -#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ -#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ -#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ - -#if defined(CONFIG_M5307) -#define MCFSIM_IMR_MASKALL 0x3fffe /* All SIM intr sources */ -#endif - -/* - * Macro to set IMR register. It is 32 bits on the 5307. - */ -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - - -/* - * Some symbol defines for the Parallel Port Pin Assignment Register - */ -#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */ - /* Clear to select par I/O */ -#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */ - /* Clear to select par I/O */ - -/* - * Defines for the IRQPAR Register - */ -#define IRQ5_LEVEL4 0x80 -#define IRQ3_LEVEL6 0x40 -#define IRQ1_LEVEL2 0x20 - - -/* - * Define the Cache register flags. - */ -#define CACR_EC (1<<31) -#define CACR_ESB (1<<29) -#define CACR_DPI (1<<28) -#define CACR_HLCK (1<<27) -#define CACR_CINVA (1<<24) -#define CACR_DNFB (1<<10) -#define CACR_DCM_WTHRU (0<<8) -#define CACR_DCM_WBACK (1<<8) -#define CACR_DCM_OFF_PRE (2<<8) -#define CACR_DCM_OFF_IMP (3<<8) -#define CACR_DW (1<<5) - -#define ACR_BASE_POS 24 -#define ACR_MASK_POS 16 -#define ACR_ENABLE (1<<15) -#define ACR_USER (0<<13) -#define ACR_SUPER (1<<13) -#define ACR_ANY (2<<13) -#define ACR_CM_WTHRU (0<<5) -#define ACR_CM_WBACK (1<<5) -#define ACR_CM_OFF_PRE (2<<5) -#define ACR_CM_OFF_IMP (3<<5) -#define ACR_WPROTECT (1<<2) - -/****************************************************************************/ -#endif /* m5307sim_h */ diff --git a/include/asm-m68knommu/m532xsim.h b/include/asm-m68knommu/m532xsim.h deleted file mode 100644 index 1835fd20a82c..000000000000 --- a/include/asm-m68knommu/m532xsim.h +++ /dev/null @@ -1,2238 +0,0 @@ -/****************************************************************************/ - -/* - * m532xsim.h -- ColdFire 5329 registers - */ - -/****************************************************************************/ -#ifndef m532xsim_h -#define m532xsim_h -/****************************************************************************/ - -#define MCF_REG32(x) (*(volatile unsigned long *)(x)) -#define MCF_REG16(x) (*(volatile unsigned short *)(x)) -#define MCF_REG08(x) (*(volatile unsigned char *)(x)) - -#define MCFINT_VECBASE 64 -#define MCFINT_UART0 26 /* Interrupt number for UART0 */ -#define MCFINT_UART1 27 /* Interrupt number for UART1 */ - -#define MCF_WTM_WCR MCF_REG16(0xFC098000) - -/* - * Define the 532x SIM register set addresses. - */ -#define MCFSIM_IPRL 0xFC048004 -#define MCFSIM_IPRH 0xFC048000 -#define MCFSIM_IPR MCFSIM_IPRL -#define MCFSIM_IMRL 0xFC04800C -#define MCFSIM_IMRH 0xFC048008 -#define MCFSIM_IMR MCFSIM_IMRL -#define MCFSIM_ICR0 0xFC048040 -#define MCFSIM_ICR1 0xFC048041 -#define MCFSIM_ICR2 0xFC048042 -#define MCFSIM_ICR3 0xFC048043 -#define MCFSIM_ICR4 0xFC048044 -#define MCFSIM_ICR5 0xFC048045 -#define MCFSIM_ICR6 0xFC048046 -#define MCFSIM_ICR7 0xFC048047 -#define MCFSIM_ICR8 0xFC048048 -#define MCFSIM_ICR9 0xFC048049 -#define MCFSIM_ICR10 0xFC04804A -#define MCFSIM_ICR11 0xFC04804B - -/* - * Some symbol defines for the above... - */ -#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ -#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ -#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ -#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ -#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ - - -#define MCFSIM_IMR_MASKALL 0xFFFFFFFF /* All SIM intr sources */ - -#define MCFSIM_IMR_SIMR0 0xFC04801C -#define MCFSIM_IMR_SIMR1 0xFC04C01C -#define MCFSIM_IMR_CIMR0 0xFC04801D -#define MCFSIM_IMR_CIMR1 0xFC04C01D - -#define MCFSIM_ICR_TIMER1 (0xFC048040+32) -#define MCFSIM_ICR_TIMER2 (0xFC048040+33) - - -/* - * Macro to set IMR register. It is 32 bits on the 5307. - */ -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - -#define mcf_getiprl() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL)) - -#define mcf_getiprh() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH)) - - -#define mcf_enable_irq0(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq); - -#define mcf_enable_irq1(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq); - -#define mcf_disable_irq0(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq); - -#define mcf_disable_irq1(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq); - -/* - * Define the Cache register flags. - */ -#define CACR_EC (1<<31) -#define CACR_ESB (1<<29) -#define CACR_DPI (1<<28) -#define CACR_HLCK (1<<27) -#define CACR_CINVA (1<<24) -#define CACR_DNFB (1<<10) -#define CACR_DCM_WTHRU (0<<8) -#define CACR_DCM_WBACK (1<<8) -#define CACR_DCM_OFF_PRE (2<<8) -#define CACR_DCM_OFF_IMP (3<<8) -#define CACR_DW (1<<5) - -#define ACR_BASE_POS 24 -#define ACR_MASK_POS 16 -#define ACR_ENABLE (1<<15) -#define ACR_USER (0<<13) -#define ACR_SUPER (1<<13) -#define ACR_ANY (2<<13) -#define ACR_CM_WTHRU (0<<5) -#define ACR_CM_WBACK (1<<5) -#define ACR_CM_OFF_PRE (2<<5) -#define ACR_CM_OFF_IMP (3<<5) -#define ACR_WPROTECT (1<<2) - -/********************************************************************* - * - * Inter-IC (I2C) Module - * - *********************************************************************/ - -/* Read/Write access macros for general use */ -#define MCF532x_I2C_I2ADR (volatile u8 *) (0xFC058000) // Address -#define MCF532x_I2C_I2FDR (volatile u8 *) (0xFC058004) // Freq Divider -#define MCF532x_I2C_I2CR (volatile u8 *) (0xFC058008) // Control -#define MCF532x_I2C_I2SR (volatile u8 *) (0xFC05800C) // Status -#define MCF532x_I2C_I2DR (volatile u8 *) (0xFC058010) // Data I/O - -/* Bit level definitions and macros */ -#define MCF532x_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) - -#define MCF532x_I2C_I2FDR_IC(x) (((x)&0x3F)) - -#define MCF532x_I2C_I2CR_IEN (0x80) // I2C enable -#define MCF532x_I2C_I2CR_IIEN (0x40) // interrupt enable -#define MCF532x_I2C_I2CR_MSTA (0x20) // master/slave mode -#define MCF532x_I2C_I2CR_MTX (0x10) // transmit/receive mode -#define MCF532x_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable -#define MCF532x_I2C_I2CR_RSTA (0x04) // repeat start - -#define MCF532x_I2C_I2SR_ICF (0x80) // data transfer bit -#define MCF532x_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave -#define MCF532x_I2C_I2SR_IBB (0x20) // I2C bus busy -#define MCF532x_I2C_I2SR_IAL (0x10) // aribitration lost -#define MCF532x_I2C_I2SR_SRW (0x04) // slave read/write -#define MCF532x_I2C_I2SR_IIF (0x02) // I2C interrupt -#define MCF532x_I2C_I2SR_RXAK (0x01) // received acknowledge - -#define MCF532x_PAR_FECI2C (volatile u8 *) (0xFC0A4053) - - -/* - * The M5329EVB board needs a help getting its devices initialized - * at kernel start time if dBUG doesn't set it up (for example - * it is not used), so we need to do it manually. - */ -#ifdef __ASSEMBLER__ -.macro m5329EVB_setup - movel #0xFC098000, %a7 - movel #0x0, (%a7) -#define CORE_SRAM 0x80000000 -#define CORE_SRAM_SIZE 0x8000 - movel #CORE_SRAM, %d0 - addl #0x221, %d0 - movec %d0,%RAMBAR1 - movel #CORE_SRAM, %sp - addl #CORE_SRAM_SIZE, %sp - jsr sysinit -.endm -#define PLATFORM_SETUP m5329EVB_setup - -#endif /* __ASSEMBLER__ */ - -/********************************************************************* - * - * Chip Configuration Module (CCM) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_CCM_CCR MCF_REG16(0xFC0A0004) -#define MCF_CCM_RCON MCF_REG16(0xFC0A0008) -#define MCF_CCM_CIR MCF_REG16(0xFC0A000A) -#define MCF_CCM_MISCCR MCF_REG16(0xFC0A0010) -#define MCF_CCM_CDR MCF_REG16(0xFC0A0012) -#define MCF_CCM_UHCSR MCF_REG16(0xFC0A0014) -#define MCF_CCM_UOCSR MCF_REG16(0xFC0A0016) - -/* Bit definitions and macros for MCF_CCM_CCR */ -#define MCF_CCM_CCR_RESERVED (0x0001) -#define MCF_CCM_CCR_PLL_MODE (0x0003) -#define MCF_CCM_CCR_OSC_MODE (0x0005) -#define MCF_CCM_CCR_BOOTPS(x) (((x)&0x0003)<<3|0x0001) -#define MCF_CCM_CCR_LOAD (0x0021) -#define MCF_CCM_CCR_LIMP (0x0041) -#define MCF_CCM_CCR_CSC(x) (((x)&0x0003)<<8|0x0001) - -/* Bit definitions and macros for MCF_CCM_RCON */ -#define MCF_CCM_RCON_RESERVED (0x0001) -#define MCF_CCM_RCON_PLL_MODE (0x0003) -#define MCF_CCM_RCON_OSC_MODE (0x0005) -#define MCF_CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3|0x0001) -#define MCF_CCM_RCON_LOAD (0x0021) -#define MCF_CCM_RCON_LIMP (0x0041) -#define MCF_CCM_RCON_CSC(x) (((x)&0x0003)<<8|0x0001) - -/* Bit definitions and macros for MCF_CCM_CIR */ -#define MCF_CCM_CIR_PRN(x) (((x)&0x003F)<<0) -#define MCF_CCM_CIR_PIN(x) (((x)&0x03FF)<<6) - -/* Bit definitions and macros for MCF_CCM_MISCCR */ -#define MCF_CCM_MISCCR_USBSRC (0x0001) -#define MCF_CCM_MISCCR_USBDIV (0x0002) -#define MCF_CCM_MISCCR_SSI_SRC (0x0010) -#define MCF_CCM_MISCCR_TIM_DMA (0x0020) -#define MCF_CCM_MISCCR_SSI_PUS (0x0040) -#define MCF_CCM_MISCCR_SSI_PUE (0x0080) -#define MCF_CCM_MISCCR_LCD_CHEN (0x0100) -#define MCF_CCM_MISCCR_LIMP (0x1000) -#define MCF_CCM_MISCCR_PLL_LOCK (0x2000) - -/* Bit definitions and macros for MCF_CCM_CDR */ -#define MCF_CCM_CDR_SSIDIV(x) (((x)&0x000F)<<0) -#define MCF_CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) - -/* Bit definitions and macros for MCF_CCM_UHCSR */ -#define MCF_CCM_UHCSR_XPDE (0x0001) -#define MCF_CCM_UHCSR_UHMIE (0x0002) -#define MCF_CCM_UHCSR_WKUP (0x0004) -#define MCF_CCM_UHCSR_PORTIND(x) (((x)&0x0003)<<14) - -/* Bit definitions and macros for MCF_CCM_UOCSR */ -#define MCF_CCM_UOCSR_XPDE (0x0001) -#define MCF_CCM_UOCSR_UOMIE (0x0002) -#define MCF_CCM_UOCSR_WKUP (0x0004) -#define MCF_CCM_UOCSR_PWRFLT (0x0008) -#define MCF_CCM_UOCSR_SEND (0x0010) -#define MCF_CCM_UOCSR_VVLD (0x0020) -#define MCF_CCM_UOCSR_BVLD (0x0040) -#define MCF_CCM_UOCSR_AVLD (0x0080) -#define MCF_CCM_UOCSR_DPPU (0x0100) -#define MCF_CCM_UOCSR_DCR_VBUS (0x0200) -#define MCF_CCM_UOCSR_CRG_VBUS (0x0400) -#define MCF_CCM_UOCSR_DRV_VBUS (0x0800) -#define MCF_CCM_UOCSR_DMPD (0x1000) -#define MCF_CCM_UOCSR_DPPD (0x2000) -#define MCF_CCM_UOCSR_PORTIND(x) (((x)&0x0003)<<14) - -/********************************************************************* - * - * DMA Timers (DTIM) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_DTIM0_DTMR MCF_REG16(0xFC070000) -#define MCF_DTIM0_DTXMR MCF_REG08(0xFC070002) -#define MCF_DTIM0_DTER MCF_REG08(0xFC070003) -#define MCF_DTIM0_DTRR MCF_REG32(0xFC070004) -#define MCF_DTIM0_DTCR MCF_REG32(0xFC070008) -#define MCF_DTIM0_DTCN MCF_REG32(0xFC07000C) -#define MCF_DTIM1_DTMR MCF_REG16(0xFC074000) -#define MCF_DTIM1_DTXMR MCF_REG08(0xFC074002) -#define MCF_DTIM1_DTER MCF_REG08(0xFC074003) -#define MCF_DTIM1_DTRR MCF_REG32(0xFC074004) -#define MCF_DTIM1_DTCR MCF_REG32(0xFC074008) -#define MCF_DTIM1_DTCN MCF_REG32(0xFC07400C) -#define MCF_DTIM2_DTMR MCF_REG16(0xFC078000) -#define MCF_DTIM2_DTXMR MCF_REG08(0xFC078002) -#define MCF_DTIM2_DTER MCF_REG08(0xFC078003) -#define MCF_DTIM2_DTRR MCF_REG32(0xFC078004) -#define MCF_DTIM2_DTCR MCF_REG32(0xFC078008) -#define MCF_DTIM2_DTCN MCF_REG32(0xFC07800C) -#define MCF_DTIM3_DTMR MCF_REG16(0xFC07C000) -#define MCF_DTIM3_DTXMR MCF_REG08(0xFC07C002) -#define MCF_DTIM3_DTER MCF_REG08(0xFC07C003) -#define MCF_DTIM3_DTRR MCF_REG32(0xFC07C004) -#define MCF_DTIM3_DTCR MCF_REG32(0xFC07C008) -#define MCF_DTIM3_DTCN MCF_REG32(0xFC07C00C) -#define MCF_DTIM_DTMR(x) MCF_REG16(0xFC070000+((x)*0x4000)) -#define MCF_DTIM_DTXMR(x) MCF_REG08(0xFC070002+((x)*0x4000)) -#define MCF_DTIM_DTER(x) MCF_REG08(0xFC070003+((x)*0x4000)) -#define MCF_DTIM_DTRR(x) MCF_REG32(0xFC070004+((x)*0x4000)) -#define MCF_DTIM_DTCR(x) MCF_REG32(0xFC070008+((x)*0x4000)) -#define MCF_DTIM_DTCN(x) MCF_REG32(0xFC07000C+((x)*0x4000)) - -/* Bit definitions and macros for MCF_DTIM_DTMR */ -#define MCF_DTIM_DTMR_RST (0x0001) -#define MCF_DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) -#define MCF_DTIM_DTMR_FRR (0x0008) -#define MCF_DTIM_DTMR_ORRI (0x0010) -#define MCF_DTIM_DTMR_OM (0x0020) -#define MCF_DTIM_DTMR_CE(x) (((x)&0x0003)<<6) -#define MCF_DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) -#define MCF_DTIM_DTMR_CE_ANY (0x00C0) -#define MCF_DTIM_DTMR_CE_FALL (0x0080) -#define MCF_DTIM_DTMR_CE_RISE (0x0040) -#define MCF_DTIM_DTMR_CE_NONE (0x0000) -#define MCF_DTIM_DTMR_CLK_DTIN (0x0006) -#define MCF_DTIM_DTMR_CLK_DIV16 (0x0004) -#define MCF_DTIM_DTMR_CLK_DIV1 (0x0002) -#define MCF_DTIM_DTMR_CLK_STOP (0x0000) - -/* Bit definitions and macros for MCF_DTIM_DTXMR */ -#define MCF_DTIM_DTXMR_MODE16 (0x01) -#define MCF_DTIM_DTXMR_DMAEN (0x80) - -/* Bit definitions and macros for MCF_DTIM_DTER */ -#define MCF_DTIM_DTER_CAP (0x01) -#define MCF_DTIM_DTER_REF (0x02) - -/* Bit definitions and macros for MCF_DTIM_DTRR */ -#define MCF_DTIM_DTRR_REF(x) (((x)&0xFFFFFFFF)<<0) - -/* Bit definitions and macros for MCF_DTIM_DTCR */ -#define MCF_DTIM_DTCR_CAP(x) (((x)&0xFFFFFFFF)<<0) - -/* Bit definitions and macros for MCF_DTIM_DTCN */ -#define MCF_DTIM_DTCN_CNT(x) (((x)&0xFFFFFFFF)<<0) - -/********************************************************************* - * - * FlexBus Chip Selects (FBCS) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_FBCS0_CSAR MCF_REG32(0xFC008000) -#define MCF_FBCS0_CSMR MCF_REG32(0xFC008004) -#define MCF_FBCS0_CSCR MCF_REG32(0xFC008008) -#define MCF_FBCS1_CSAR MCF_REG32(0xFC00800C) -#define MCF_FBCS1_CSMR MCF_REG32(0xFC008010) -#define MCF_FBCS1_CSCR MCF_REG32(0xFC008014) -#define MCF_FBCS2_CSAR MCF_REG32(0xFC008018) -#define MCF_FBCS2_CSMR MCF_REG32(0xFC00801C) -#define MCF_FBCS2_CSCR MCF_REG32(0xFC008020) -#define MCF_FBCS3_CSAR MCF_REG32(0xFC008024) -#define MCF_FBCS3_CSMR MCF_REG32(0xFC008028) -#define MCF_FBCS3_CSCR MCF_REG32(0xFC00802C) -#define MCF_FBCS4_CSAR MCF_REG32(0xFC008030) -#define MCF_FBCS4_CSMR MCF_REG32(0xFC008034) -#define MCF_FBCS4_CSCR MCF_REG32(0xFC008038) -#define MCF_FBCS5_CSAR MCF_REG32(0xFC00803C) -#define MCF_FBCS5_CSMR MCF_REG32(0xFC008040) -#define MCF_FBCS5_CSCR MCF_REG32(0xFC008044) -#define MCF_FBCS_CSAR(x) MCF_REG32(0xFC008000+((x)*0x00C)) -#define MCF_FBCS_CSMR(x) MCF_REG32(0xFC008004+((x)*0x00C)) -#define MCF_FBCS_CSCR(x) MCF_REG32(0xFC008008+((x)*0x00C)) - -/* Bit definitions and macros for MCF_FBCS_CSAR */ -#define MCF_FBCS_CSAR_BA(x) ((x)&0xFFFF0000) - -/* Bit definitions and macros for MCF_FBCS_CSMR */ -#define MCF_FBCS_CSMR_V (0x00000001) -#define MCF_FBCS_CSMR_WP (0x00000100) -#define MCF_FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) -#define MCF_FBCS_CSMR_BAM_4G (0xFFFF0000) -#define MCF_FBCS_CSMR_BAM_2G (0x7FFF0000) -#define MCF_FBCS_CSMR_BAM_1G (0x3FFF0000) -#define MCF_FBCS_CSMR_BAM_1024M (0x3FFF0000) -#define MCF_FBCS_CSMR_BAM_512M (0x1FFF0000) -#define MCF_FBCS_CSMR_BAM_256M (0x0FFF0000) -#define MCF_FBCS_CSMR_BAM_128M (0x07FF0000) -#define MCF_FBCS_CSMR_BAM_64M (0x03FF0000) -#define MCF_FBCS_CSMR_BAM_32M (0x01FF0000) -#define MCF_FBCS_CSMR_BAM_16M (0x00FF0000) -#define MCF_FBCS_CSMR_BAM_8M (0x007F0000) -#define MCF_FBCS_CSMR_BAM_4M (0x003F0000) -#define MCF_FBCS_CSMR_BAM_2M (0x001F0000) -#define MCF_FBCS_CSMR_BAM_1M (0x000F0000) -#define MCF_FBCS_CSMR_BAM_1024K (0x000F0000) -#define MCF_FBCS_CSMR_BAM_512K (0x00070000) -#define MCF_FBCS_CSMR_BAM_256K (0x00030000) -#define MCF_FBCS_CSMR_BAM_128K (0x00010000) -#define MCF_FBCS_CSMR_BAM_64K (0x00000000) - -/* Bit definitions and macros for MCF_FBCS_CSCR */ -#define MCF_FBCS_CSCR_BSTW (0x00000008) -#define MCF_FBCS_CSCR_BSTR (0x00000010) -#define MCF_FBCS_CSCR_BEM (0x00000020) -#define MCF_FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) -#define MCF_FBCS_CSCR_AA (0x00000100) -#define MCF_FBCS_CSCR_SBM (0x00000200) -#define MCF_FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) -#define MCF_FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16) -#define MCF_FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18) -#define MCF_FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) -#define MCF_FBCS_CSCR_SWSEN (0x00800000) -#define MCF_FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26) -#define MCF_FBCS_CSCR_PS_8 (0x0040) -#define MCF_FBCS_CSCR_PS_16 (0x0080) -#define MCF_FBCS_CSCR_PS_32 (0x0000) - -/********************************************************************* - * - * General Purpose I/O (GPIO) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_GPIO_PODR_FECH MCF_REG08(0xFC0A4000) -#define MCF_GPIO_PODR_FECL MCF_REG08(0xFC0A4001) -#define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002) -#define MCF_GPIO_PODR_BUSCTL MCF_REG08(0xFC0A4003) -#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004) -#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005) -#define MCF_GPIO_PODR_PWM MCF_REG08(0xFC0A4006) -#define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007) -#define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009) -#define MCF_GPIO_PODR_QSPI MCF_REG08(0xFC0A400A) -#define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B) -#define MCF_GPIO_PODR_LCDDATAH MCF_REG08(0xFC0A400D) -#define MCF_GPIO_PODR_LCDDATAM MCF_REG08(0xFC0A400E) -#define MCF_GPIO_PODR_LCDDATAL MCF_REG08(0xFC0A400F) -#define MCF_GPIO_PODR_LCDCTLH MCF_REG08(0xFC0A4010) -#define MCF_GPIO_PODR_LCDCTLL MCF_REG08(0xFC0A4011) -#define MCF_GPIO_PDDR_FECH MCF_REG08(0xFC0A4014) -#define MCF_GPIO_PDDR_FECL MCF_REG08(0xFC0A4015) -#define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A4016) -#define MCF_GPIO_PDDR_BUSCTL MCF_REG08(0xFC0A4017) -#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A4018) -#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A4019) -#define MCF_GPIO_PDDR_PWM MCF_REG08(0xFC0A401A) -#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401B) -#define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A401C) -#define MCF_GPIO_PDDR_QSPI MCF_REG08(0xFC0A401E) -#define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A401F) -#define MCF_GPIO_PDDR_LCDDATAH MCF_REG08(0xFC0A4021) -#define MCF_GPIO_PDDR_LCDDATAM MCF_REG08(0xFC0A4022) -#define MCF_GPIO_PDDR_LCDDATAL MCF_REG08(0xFC0A4023) -#define MCF_GPIO_PDDR_LCDCTLH MCF_REG08(0xFC0A4024) -#define MCF_GPIO_PDDR_LCDCTLL MCF_REG08(0xFC0A4025) -#define MCF_GPIO_PPDSDR_FECH MCF_REG08(0xFC0A4028) -#define MCF_GPIO_PPDSDR_FECL MCF_REG08(0xFC0A4029) -#define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A402A) -#define MCF_GPIO_PPDSDR_BUSCTL MCF_REG08(0xFC0A402B) -#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A402C) -#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A402D) -#define MCF_GPIO_PPDSDR_PWM MCF_REG08(0xFC0A402E) -#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A402F) -#define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4031) -#define MCF_GPIO_PPDSDR_QSPI MCF_REG08(0xFC0A4032) -#define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A4033) -#define MCF_GPIO_PPDSDR_LCDDATAH MCF_REG08(0xFC0A4035) -#define MCF_GPIO_PPDSDR_LCDDATAM MCF_REG08(0xFC0A4036) -#define MCF_GPIO_PPDSDR_LCDDATAL MCF_REG08(0xFC0A4037) -#define MCF_GPIO_PPDSDR_LCDCTLH MCF_REG08(0xFC0A4038) -#define MCF_GPIO_PPDSDR_LCDCTLL MCF_REG08(0xFC0A4039) -#define MCF_GPIO_PCLRR_FECH MCF_REG08(0xFC0A403C) -#define MCF_GPIO_PCLRR_FECL MCF_REG08(0xFC0A403D) -#define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A403E) -#define MCF_GPIO_PCLRR_BUSCTL MCF_REG08(0xFC0A403F) -#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A4040) -#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A4041) -#define MCF_GPIO_PCLRR_PWM MCF_REG08(0xFC0A4042) -#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A4043) -#define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4045) -#define MCF_GPIO_PCLRR_QSPI MCF_REG08(0xFC0A4046) -#define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4047) -#define MCF_GPIO_PCLRR_LCDDATAH MCF_REG08(0xFC0A4049) -#define MCF_GPIO_PCLRR_LCDDATAM MCF_REG08(0xFC0A404A) -#define MCF_GPIO_PCLRR_LCDDATAL MCF_REG08(0xFC0A404B) -#define MCF_GPIO_PCLRR_LCDCTLH MCF_REG08(0xFC0A404C) -#define MCF_GPIO_PCLRR_LCDCTLL MCF_REG08(0xFC0A404D) -#define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050) -#define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051) -#define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052) -#define MCF_GPIO_PAR_FECI2C MCF_REG08(0xFC0A4053) -#define MCF_GPIO_PAR_BE MCF_REG08(0xFC0A4054) -#define MCF_GPIO_PAR_CS MCF_REG08(0xFC0A4055) -#define MCF_GPIO_PAR_SSI MCF_REG16(0xFC0A4056) -#define MCF_GPIO_PAR_UART MCF_REG16(0xFC0A4058) -#define MCF_GPIO_PAR_QSPI MCF_REG16(0xFC0A405A) -#define MCF_GPIO_PAR_TIMER MCF_REG08(0xFC0A405C) -#define MCF_GPIO_PAR_LCDDATA MCF_REG08(0xFC0A405D) -#define MCF_GPIO_PAR_LCDCTL MCF_REG16(0xFC0A405E) -#define MCF_GPIO_PAR_IRQ MCF_REG16(0xFC0A4060) -#define MCF_GPIO_MSCR_FLEXBUS MCF_REG08(0xFC0A4064) -#define MCF_GPIO_MSCR_SDRAM MCF_REG08(0xFC0A4065) -#define MCF_GPIO_DSCR_I2C MCF_REG08(0xFC0A4068) -#define MCF_GPIO_DSCR_PWM MCF_REG08(0xFC0A4069) -#define MCF_GPIO_DSCR_FEC MCF_REG08(0xFC0A406A) -#define MCF_GPIO_DSCR_UART MCF_REG08(0xFC0A406B) -#define MCF_GPIO_DSCR_QSPI MCF_REG08(0xFC0A406C) -#define MCF_GPIO_DSCR_TIMER MCF_REG08(0xFC0A406D) -#define MCF_GPIO_DSCR_SSI MCF_REG08(0xFC0A406E) -#define MCF_GPIO_DSCR_LCD MCF_REG08(0xFC0A406F) -#define MCF_GPIO_DSCR_DEBUG MCF_REG08(0xFC0A4070) -#define MCF_GPIO_DSCR_CLKRST MCF_REG08(0xFC0A4071) -#define MCF_GPIO_DSCR_IRQ MCF_REG08(0xFC0A4072) - -/* Bit definitions and macros for MCF_GPIO_PODR_FECH */ -#define MCF_GPIO_PODR_FECH_PODR_FECH0 (0x01) -#define MCF_GPIO_PODR_FECH_PODR_FECH1 (0x02) -#define MCF_GPIO_PODR_FECH_PODR_FECH2 (0x04) -#define MCF_GPIO_PODR_FECH_PODR_FECH3 (0x08) -#define MCF_GPIO_PODR_FECH_PODR_FECH4 (0x10) -#define MCF_GPIO_PODR_FECH_PODR_FECH5 (0x20) -#define MCF_GPIO_PODR_FECH_PODR_FECH6 (0x40) -#define MCF_GPIO_PODR_FECH_PODR_FECH7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PODR_FECL */ -#define MCF_GPIO_PODR_FECL_PODR_FECL0 (0x01) -#define MCF_GPIO_PODR_FECL_PODR_FECL1 (0x02) -#define MCF_GPIO_PODR_FECL_PODR_FECL2 (0x04) -#define MCF_GPIO_PODR_FECL_PODR_FECL3 (0x08) -#define MCF_GPIO_PODR_FECL_PODR_FECL4 (0x10) -#define MCF_GPIO_PODR_FECL_PODR_FECL5 (0x20) -#define MCF_GPIO_PODR_FECL_PODR_FECL6 (0x40) -#define MCF_GPIO_PODR_FECL_PODR_FECL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PODR_SSI */ -#define MCF_GPIO_PODR_SSI_PODR_SSI0 (0x01) -#define MCF_GPIO_PODR_SSI_PODR_SSI1 (0x02) -#define MCF_GPIO_PODR_SSI_PODR_SSI2 (0x04) -#define MCF_GPIO_PODR_SSI_PODR_SSI3 (0x08) -#define MCF_GPIO_PODR_SSI_PODR_SSI4 (0x10) - -/* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */ -#define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0 (0x01) -#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1 (0x02) -#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2 (0x04) -#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PODR_BE */ -#define MCF_GPIO_PODR_BE_PODR_BE0 (0x01) -#define MCF_GPIO_PODR_BE_PODR_BE1 (0x02) -#define MCF_GPIO_PODR_BE_PODR_BE2 (0x04) -#define MCF_GPIO_PODR_BE_PODR_BE3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PODR_CS */ -#define MCF_GPIO_PODR_CS_PODR_CS1 (0x02) -#define MCF_GPIO_PODR_CS_PODR_CS2 (0x04) -#define MCF_GPIO_PODR_CS_PODR_CS3 (0x08) -#define MCF_GPIO_PODR_CS_PODR_CS4 (0x10) -#define MCF_GPIO_PODR_CS_PODR_CS5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PODR_PWM */ -#define MCF_GPIO_PODR_PWM_PODR_PWM2 (0x04) -#define MCF_GPIO_PODR_PWM_PODR_PWM3 (0x08) -#define MCF_GPIO_PODR_PWM_PODR_PWM4 (0x10) -#define MCF_GPIO_PODR_PWM_PODR_PWM5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */ -#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0 (0x01) -#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1 (0x02) -#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2 (0x04) -#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PODR_UART */ -#define MCF_GPIO_PODR_UART_PODR_UART0 (0x01) -#define MCF_GPIO_PODR_UART_PODR_UART1 (0x02) -#define MCF_GPIO_PODR_UART_PODR_UART2 (0x04) -#define MCF_GPIO_PODR_UART_PODR_UART3 (0x08) -#define MCF_GPIO_PODR_UART_PODR_UART4 (0x10) -#define MCF_GPIO_PODR_UART_PODR_UART5 (0x20) -#define MCF_GPIO_PODR_UART_PODR_UART6 (0x40) -#define MCF_GPIO_PODR_UART_PODR_UART7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PODR_QSPI */ -#define MCF_GPIO_PODR_QSPI_PODR_QSPI0 (0x01) -#define MCF_GPIO_PODR_QSPI_PODR_QSPI1 (0x02) -#define MCF_GPIO_PODR_QSPI_PODR_QSPI2 (0x04) -#define MCF_GPIO_PODR_QSPI_PODR_QSPI3 (0x08) -#define MCF_GPIO_PODR_QSPI_PODR_QSPI4 (0x10) -#define MCF_GPIO_PODR_QSPI_PODR_QSPI5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PODR_TIMER */ -#define MCF_GPIO_PODR_TIMER_PODR_TIMER0 (0x01) -#define MCF_GPIO_PODR_TIMER_PODR_TIMER1 (0x02) -#define MCF_GPIO_PODR_TIMER_PODR_TIMER2 (0x04) -#define MCF_GPIO_PODR_TIMER_PODR_TIMER3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */ -#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0 (0x01) -#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1 (0x02) - -/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */ -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0 (0x01) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1 (0x02) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2 (0x04) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3 (0x08) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4 (0x10) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5 (0x20) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6 (0x40) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */ -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0 (0x01) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1 (0x02) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2 (0x04) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3 (0x08) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4 (0x10) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5 (0x20) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6 (0x40) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */ -#define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0 (0x01) - -/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */ -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0 (0x01) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1 (0x02) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2 (0x04) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3 (0x08) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4 (0x10) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5 (0x20) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6 (0x40) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_FECH */ -#define MCF_GPIO_PDDR_FECH_PDDR_FECH0 (0x01) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH1 (0x02) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH2 (0x04) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH3 (0x08) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH4 (0x10) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH5 (0x20) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH6 (0x40) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_FECL */ -#define MCF_GPIO_PDDR_FECL_PDDR_FECL0 (0x01) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL1 (0x02) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL2 (0x04) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL3 (0x08) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL4 (0x10) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL5 (0x20) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL6 (0x40) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_SSI */ -#define MCF_GPIO_PDDR_SSI_PDDR_SSI0 (0x01) -#define MCF_GPIO_PDDR_SSI_PDDR_SSI1 (0x02) -#define MCF_GPIO_PDDR_SSI_PDDR_SSI2 (0x04) -#define MCF_GPIO_PDDR_SSI_PDDR_SSI3 (0x08) -#define MCF_GPIO_PDDR_SSI_PDDR_SSI4 (0x10) - -/* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */ -#define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0 (0x01) -#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1 (0x02) -#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2 (0x04) -#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PDDR_BE */ -#define MCF_GPIO_PDDR_BE_PDDR_BE0 (0x01) -#define MCF_GPIO_PDDR_BE_PDDR_BE1 (0x02) -#define MCF_GPIO_PDDR_BE_PDDR_BE2 (0x04) -#define MCF_GPIO_PDDR_BE_PDDR_BE3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PDDR_CS */ -#define MCF_GPIO_PDDR_CS_PDDR_CS1 (0x02) -#define MCF_GPIO_PDDR_CS_PDDR_CS2 (0x04) -#define MCF_GPIO_PDDR_CS_PDDR_CS3 (0x08) -#define MCF_GPIO_PDDR_CS_PDDR_CS4 (0x10) -#define MCF_GPIO_PDDR_CS_PDDR_CS5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PDDR_PWM */ -#define MCF_GPIO_PDDR_PWM_PDDR_PWM2 (0x04) -#define MCF_GPIO_PDDR_PWM_PDDR_PWM3 (0x08) -#define MCF_GPIO_PDDR_PWM_PDDR_PWM4 (0x10) -#define MCF_GPIO_PDDR_PWM_PDDR_PWM5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */ -#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0 (0x01) -#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1 (0x02) -#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2 (0x04) -#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PDDR_UART */ -#define MCF_GPIO_PDDR_UART_PDDR_UART0 (0x01) -#define MCF_GPIO_PDDR_UART_PDDR_UART1 (0x02) -#define MCF_GPIO_PDDR_UART_PDDR_UART2 (0x04) -#define MCF_GPIO_PDDR_UART_PDDR_UART3 (0x08) -#define MCF_GPIO_PDDR_UART_PDDR_UART4 (0x10) -#define MCF_GPIO_PDDR_UART_PDDR_UART5 (0x20) -#define MCF_GPIO_PDDR_UART_PDDR_UART6 (0x40) -#define MCF_GPIO_PDDR_UART_PDDR_UART7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */ -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0 (0x01) -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1 (0x02) -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2 (0x04) -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3 (0x08) -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4 (0x10) -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */ -#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0 (0x01) -#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1 (0x02) -#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2 (0x04) -#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */ -#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0 (0x01) -#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1 (0x02) - -/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */ -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0 (0x01) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1 (0x02) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2 (0x04) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3 (0x08) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4 (0x10) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5 (0x20) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6 (0x40) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */ -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0 (0x01) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1 (0x02) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2 (0x04) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3 (0x08) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4 (0x10) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5 (0x20) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6 (0x40) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */ -#define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0 (0x01) - -/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */ -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0 (0x01) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1 (0x02) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2 (0x04) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3 (0x08) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4 (0x10) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5 (0x20) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6 (0x40) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */ -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0 (0x01) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1 (0x02) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2 (0x04) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3 (0x08) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4 (0x10) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5 (0x20) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6 (0x40) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */ -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0 (0x01) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1 (0x02) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2 (0x04) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3 (0x08) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4 (0x10) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5 (0x20) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6 (0x40) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */ -#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0 (0x01) -#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1 (0x02) -#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2 (0x04) -#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3 (0x08) -#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4 (0x10) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */ -#define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0 (0x01) -#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1 (0x02) -#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2 (0x04) -#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */ -#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0 (0x01) -#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1 (0x02) -#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2 (0x04) -#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */ -#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1 (0x02) -#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2 (0x04) -#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3 (0x08) -#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4 (0x10) -#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */ -#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2 (0x04) -#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3 (0x08) -#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4 (0x10) -#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */ -#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0 (0x01) -#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1 (0x02) -#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2 (0x04) -#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */ -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0 (0x01) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1 (0x02) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2 (0x04) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3 (0x08) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4 (0x10) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5 (0x20) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6 (0x40) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */ -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0 (0x01) -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1 (0x02) -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2 (0x04) -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3 (0x08) -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4 (0x10) -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */ -#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0 (0x01) -#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1 (0x02) -#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2 (0x04) -#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */ -#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0 (0x01) -#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1 (0x02) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */ -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0 (0x01) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1 (0x02) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2 (0x04) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3 (0x08) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4 (0x10) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5 (0x20) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6 (0x40) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */ -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0 (0x01) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1 (0x02) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2 (0x04) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3 (0x08) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4 (0x10) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5 (0x20) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6 (0x40) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */ -#define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0 (0x01) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */ -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0 (0x01) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1 (0x02) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2 (0x04) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3 (0x08) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4 (0x10) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5 (0x20) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6 (0x40) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */ -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0 (0x01) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1 (0x02) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2 (0x04) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3 (0x08) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4 (0x10) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5 (0x20) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6 (0x40) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */ -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0 (0x01) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1 (0x02) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2 (0x04) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3 (0x08) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4 (0x10) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5 (0x20) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6 (0x40) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */ -#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0 (0x01) -#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1 (0x02) -#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2 (0x04) -#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3 (0x08) -#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4 (0x10) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */ -#define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0 (0x01) -#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1 (0x02) -#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2 (0x04) -#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_BE */ -#define MCF_GPIO_PCLRR_BE_PCLRR_BE0 (0x01) -#define MCF_GPIO_PCLRR_BE_PCLRR_BE1 (0x02) -#define MCF_GPIO_PCLRR_BE_PCLRR_BE2 (0x04) -#define MCF_GPIO_PCLRR_BE_PCLRR_BE3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_CS */ -#define MCF_GPIO_PCLRR_CS_PCLRR_CS1 (0x02) -#define MCF_GPIO_PCLRR_CS_PCLRR_CS2 (0x04) -#define MCF_GPIO_PCLRR_CS_PCLRR_CS3 (0x08) -#define MCF_GPIO_PCLRR_CS_PCLRR_CS4 (0x10) -#define MCF_GPIO_PCLRR_CS_PCLRR_CS5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */ -#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2 (0x04) -#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3 (0x08) -#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4 (0x10) -#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */ -#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0 (0x01) -#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1 (0x02) -#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2 (0x04) -#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_UART */ -#define MCF_GPIO_PCLRR_UART_PCLRR_UART0 (0x01) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART1 (0x02) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART2 (0x04) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART3 (0x08) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART4 (0x10) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART5 (0x20) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART6 (0x40) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */ -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0 (0x01) -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1 (0x02) -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2 (0x04) -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3 (0x08) -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4 (0x10) -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */ -#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0 (0x01) -#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1 (0x02) -#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2 (0x04) -#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */ -#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0 (0x01) -#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1 (0x02) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */ -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0 (0x01) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1 (0x02) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2 (0x04) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3 (0x08) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4 (0x10) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5 (0x20) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6 (0x40) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */ -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0 (0x01) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1 (0x02) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2 (0x04) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3 (0x08) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4 (0x10) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5 (0x20) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6 (0x40) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */ -#define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0 (0x01) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */ -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0 (0x01) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1 (0x02) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2 (0x04) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3 (0x08) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4 (0x10) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5 (0x20) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6 (0x40) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PAR_FEC */ -#define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x) (((x)&0x03)<<0) -#define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x) (((x)&0x03)<<2) -#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO (0x00) -#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1 (0x04) -#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC (0x0C) -#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO (0x00) -#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART (0x01) -#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC (0x03) - -/* Bit definitions and macros for MCF_GPIO_PAR_PWM */ -#define MCF_GPIO_PAR_PWM_PAR_PWM1(x) (((x)&0x03)<<0) -#define MCF_GPIO_PAR_PWM_PAR_PWM3(x) (((x)&0x03)<<2) -#define MCF_GPIO_PAR_PWM_PAR_PWM5 (0x10) -#define MCF_GPIO_PAR_PWM_PAR_PWM7 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */ -#define MCF_GPIO_PAR_BUSCTL_PAR_TS(x) (((x)&0x03)<<3) -#define MCF_GPIO_PAR_BUSCTL_PAR_RWB (0x20) -#define MCF_GPIO_PAR_BUSCTL_PAR_TA (0x40) -#define MCF_GPIO_PAR_BUSCTL_PAR_OE (0x80) -#define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO (0x00) -#define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE (0x80) -#define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO (0x00) -#define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA (0x40) -#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO (0x00) -#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB (0x20) -#define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO (0x00) -#define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0 (0x10) -#define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS (0x18) - -/* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */ -#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x) (((x)&0x03)<<0) -#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x) (((x)&0x03)<<2) -#define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x) (((x)&0x03)<<4) -#define MCF_GPIO_PAR_FECI2C_PAR_MDC(x) (((x)&0x03)<<6) -#define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO (0x00) -#define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2 (0x40) -#define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL (0x80) -#define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC (0xC0) -#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO (0x00) -#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2 (0x10) -#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA (0x20) -#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO (0x30) -#define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO (0x00) -#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) -#define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL (0x0C) -#define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO (0x00) -#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) -#define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA (0x03) - -/* Bit definitions and macros for MCF_GPIO_PAR_BE */ -#define MCF_GPIO_PAR_BE_PAR_BE0 (0x01) -#define MCF_GPIO_PAR_BE_PAR_BE1 (0x02) -#define MCF_GPIO_PAR_BE_PAR_BE2 (0x04) -#define MCF_GPIO_PAR_BE_PAR_BE3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PAR_CS */ -#define MCF_GPIO_PAR_CS_PAR_CS1 (0x02) -#define MCF_GPIO_PAR_CS_PAR_CS2 (0x04) -#define MCF_GPIO_PAR_CS_PAR_CS3 (0x08) -#define MCF_GPIO_PAR_CS_PAR_CS4 (0x10) -#define MCF_GPIO_PAR_CS_PAR_CS5 (0x20) -#define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO (0x00) -#define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1 (0x01) -#define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1 (0x03) - -/* Bit definitions and macros for MCF_GPIO_PAR_SSI */ -#define MCF_GPIO_PAR_SSI_PAR_MCLK (0x0080) -#define MCF_GPIO_PAR_SSI_PAR_TXD(x) (((x)&0x0003)<<8) -#define MCF_GPIO_PAR_SSI_PAR_RXD(x) (((x)&0x0003)<<10) -#define MCF_GPIO_PAR_SSI_PAR_FS(x) (((x)&0x0003)<<12) -#define MCF_GPIO_PAR_SSI_PAR_BCLK(x) (((x)&0x0003)<<14) - -/* Bit definitions and macros for MCF_GPIO_PAR_UART */ -#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0001) -#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0002) -#define MCF_GPIO_PAR_UART_PAR_URTS0 (0x0004) -#define MCF_GPIO_PAR_UART_PAR_UCTS0 (0x0008) -#define MCF_GPIO_PAR_UART_PAR_UTXD1(x) (((x)&0x0003)<<4) -#define MCF_GPIO_PAR_UART_PAR_URXD1(x) (((x)&0x0003)<<6) -#define MCF_GPIO_PAR_UART_PAR_URTS1(x) (((x)&0x0003)<<8) -#define MCF_GPIO_PAR_UART_PAR_UCTS1(x) (((x)&0x0003)<<10) -#define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO (0x0000) -#define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK (0x0800) -#define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7 (0x0400) -#define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1 (0x0C00) -#define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO (0x0000) -#define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS (0x0200) -#define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6 (0x0100) -#define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1 (0x0300) -#define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO (0x0000) -#define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD (0x0080) -#define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5 (0x0040) -#define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1 (0x00C0) -#define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO (0x0000) -#define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD (0x0020) -#define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4 (0x0010) -#define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1 (0x0030) - -/* Bit definitions and macros for MCF_GPIO_PAR_QSPI */ -#define MCF_GPIO_PAR_QSPI_PAR_SCK(x) (((x)&0x0003)<<4) -#define MCF_GPIO_PAR_QSPI_PAR_DOUT(x) (((x)&0x0003)<<6) -#define MCF_GPIO_PAR_QSPI_PAR_DIN(x) (((x)&0x0003)<<8) -#define MCF_GPIO_PAR_QSPI_PAR_PCS0(x) (((x)&0x0003)<<10) -#define MCF_GPIO_PAR_QSPI_PAR_PCS1(x) (((x)&0x0003)<<12) -#define MCF_GPIO_PAR_QSPI_PAR_PCS2(x) (((x)&0x0003)<<14) - -/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */ -#define MCF_GPIO_PAR_TIMER_PAR_TIN0(x) (((x)&0x03)<<0) -#define MCF_GPIO_PAR_TIMER_PAR_TIN1(x) (((x)&0x03)<<2) -#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x) (((x)&0x03)<<4) -#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x) (((x)&0x03)<<6) -#define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO (0x00) -#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3 (0x80) -#define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2 (0x40) -#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3 (0xC0) -#define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO (0x00) -#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2 (0x20) -#define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2 (0x10) -#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2 (0x30) -#define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO (0x00) -#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1 (0x08) -#define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1 (0x04) -#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1 (0x0C) -#define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO (0x00) -#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0 (0x02) -#define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0 (0x01) -#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0 (0x03) - -/* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */ -#define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x) (((x)&0x03)<<0) -#define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x) (((x)&0x03)<<2) -#define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x) (((x)&0x03)<<4) -#define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x) (((x)&0x03)<<6) - -/* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */ -#define MCF_GPIO_PAR_LCDCTL_PAR_CLS (0x0001) -#define MCF_GPIO_PAR_LCDCTL_PAR_PS (0x0002) -#define MCF_GPIO_PAR_LCDCTL_PAR_REV (0x0004) -#define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR (0x0008) -#define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST (0x0010) -#define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK (0x0020) -#define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC (0x0040) -#define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC (0x0080) -#define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE (0x0100) - -/* Bit definitions and macros for MCF_GPIO_PAR_IRQ */ -#define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x) (((x)&0x0003)<<4) -#define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x) (((x)&0x0003)<<6) -#define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x) (((x)&0x0003)<<8) -#define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x) (((x)&0x0003)<<10) -#define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x) (((x)&0x0003)<<12) - -/* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */ -#define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x) (((x)&0x03)<<0) -#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x) (((x)&0x03)<<2) -#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x) (((x)&0x03)<<4) - -/* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */ -#define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x) (((x)&0x03)<<0) -#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x) (((x)&0x03)<<2) -#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x) (((x)&0x03)<<4) - -/* Bit definitions and macros for MCF_GPIO_DSCR_I2C */ -#define MCF_GPIO_DSCR_I2C_I2C_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_PWM */ -#define MCF_GPIO_DSCR_PWM_PWM_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_FEC */ -#define MCF_GPIO_DSCR_FEC_FEC_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_UART */ -#define MCF_GPIO_DSCR_UART_UART0_DSE(x) (((x)&0x03)<<0) -#define MCF_GPIO_DSCR_UART_UART1_DSE(x) (((x)&0x03)<<2) - -/* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */ -#define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */ -#define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_SSI */ -#define MCF_GPIO_DSCR_SSI_SSI_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_LCD */ -#define MCF_GPIO_DSCR_LCD_LCD_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */ -#define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */ -#define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */ -#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x) (((x)&0x03)<<0) - -/********************************************************************* - * - * Interrupt Controller (INTC) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_INTC0_IPRH MCF_REG32(0xFC048000) -#define MCF_INTC0_IPRL MCF_REG32(0xFC048004) -#define MCF_INTC0_IMRH MCF_REG32(0xFC048008) -#define MCF_INTC0_IMRL MCF_REG32(0xFC04800C) -#define MCF_INTC0_INTFRCH MCF_REG32(0xFC048010) -#define MCF_INTC0_INTFRCL MCF_REG32(0xFC048014) -#define MCF_INTC0_ICONFIG MCF_REG16(0xFC04801A) -#define MCF_INTC0_SIMR MCF_REG08(0xFC04801C) -#define MCF_INTC0_CIMR MCF_REG08(0xFC04801D) -#define MCF_INTC0_CLMASK MCF_REG08(0xFC04801E) -#define MCF_INTC0_SLMASK MCF_REG08(0xFC04801F) -#define MCF_INTC0_ICR0 MCF_REG08(0xFC048040) -#define MCF_INTC0_ICR1 MCF_REG08(0xFC048041) -#define MCF_INTC0_ICR2 MCF_REG08(0xFC048042) -#define MCF_INTC0_ICR3 MCF_REG08(0xFC048043) -#define MCF_INTC0_ICR4 MCF_REG08(0xFC048044) -#define MCF_INTC0_ICR5 MCF_REG08(0xFC048045) -#define MCF_INTC0_ICR6 MCF_REG08(0xFC048046) -#define MCF_INTC0_ICR7 MCF_REG08(0xFC048047) -#define MCF_INTC0_ICR8 MCF_REG08(0xFC048048) -#define MCF_INTC0_ICR9 MCF_REG08(0xFC048049) -#define MCF_INTC0_ICR10 MCF_REG08(0xFC04804A) -#define MCF_INTC0_ICR11 MCF_REG08(0xFC04804B) -#define MCF_INTC0_ICR12 MCF_REG08(0xFC04804C) -#define MCF_INTC0_ICR13 MCF_REG08(0xFC04804D) -#define MCF_INTC0_ICR14 MCF_REG08(0xFC04804E) -#define MCF_INTC0_ICR15 MCF_REG08(0xFC04804F) -#define MCF_INTC0_ICR16 MCF_REG08(0xFC048050) -#define MCF_INTC0_ICR17 MCF_REG08(0xFC048051) -#define MCF_INTC0_ICR18 MCF_REG08(0xFC048052) -#define MCF_INTC0_ICR19 MCF_REG08(0xFC048053) -#define MCF_INTC0_ICR20 MCF_REG08(0xFC048054) -#define MCF_INTC0_ICR21 MCF_REG08(0xFC048055) -#define MCF_INTC0_ICR22 MCF_REG08(0xFC048056) -#define MCF_INTC0_ICR23 MCF_REG08(0xFC048057) -#define MCF_INTC0_ICR24 MCF_REG08(0xFC048058) -#define MCF_INTC0_ICR25 MCF_REG08(0xFC048059) -#define MCF_INTC0_ICR26 MCF_REG08(0xFC04805A) -#define MCF_INTC0_ICR27 MCF_REG08(0xFC04805B) -#define MCF_INTC0_ICR28 MCF_REG08(0xFC04805C) -#define MCF_INTC0_ICR29 MCF_REG08(0xFC04805D) -#define MCF_INTC0_ICR30 MCF_REG08(0xFC04805E) -#define MCF_INTC0_ICR31 MCF_REG08(0xFC04805F) -#define MCF_INTC0_ICR32 MCF_REG08(0xFC048060) -#define MCF_INTC0_ICR33 MCF_REG08(0xFC048061) -#define MCF_INTC0_ICR34 MCF_REG08(0xFC048062) -#define MCF_INTC0_ICR35 MCF_REG08(0xFC048063) -#define MCF_INTC0_ICR36 MCF_REG08(0xFC048064) -#define MCF_INTC0_ICR37 MCF_REG08(0xFC048065) -#define MCF_INTC0_ICR38 MCF_REG08(0xFC048066) -#define MCF_INTC0_ICR39 MCF_REG08(0xFC048067) -#define MCF_INTC0_ICR40 MCF_REG08(0xFC048068) -#define MCF_INTC0_ICR41 MCF_REG08(0xFC048069) -#define MCF_INTC0_ICR42 MCF_REG08(0xFC04806A) -#define MCF_INTC0_ICR43 MCF_REG08(0xFC04806B) -#define MCF_INTC0_ICR44 MCF_REG08(0xFC04806C) -#define MCF_INTC0_ICR45 MCF_REG08(0xFC04806D) -#define MCF_INTC0_ICR46 MCF_REG08(0xFC04806E) -#define MCF_INTC0_ICR47 MCF_REG08(0xFC04806F) -#define MCF_INTC0_ICR48 MCF_REG08(0xFC048070) -#define MCF_INTC0_ICR49 MCF_REG08(0xFC048071) -#define MCF_INTC0_ICR50 MCF_REG08(0xFC048072) -#define MCF_INTC0_ICR51 MCF_REG08(0xFC048073) -#define MCF_INTC0_ICR52 MCF_REG08(0xFC048074) -#define MCF_INTC0_ICR53 MCF_REG08(0xFC048075) -#define MCF_INTC0_ICR54 MCF_REG08(0xFC048076) -#define MCF_INTC0_ICR55 MCF_REG08(0xFC048077) -#define MCF_INTC0_ICR56 MCF_REG08(0xFC048078) -#define MCF_INTC0_ICR57 MCF_REG08(0xFC048079) -#define MCF_INTC0_ICR58 MCF_REG08(0xFC04807A) -#define MCF_INTC0_ICR59 MCF_REG08(0xFC04807B) -#define MCF_INTC0_ICR60 MCF_REG08(0xFC04807C) -#define MCF_INTC0_ICR61 MCF_REG08(0xFC04807D) -#define MCF_INTC0_ICR62 MCF_REG08(0xFC04807E) -#define MCF_INTC0_ICR63 MCF_REG08(0xFC04807F) -#define MCF_INTC0_ICR(x) MCF_REG08(0xFC048040+((x)*0x001)) -#define MCF_INTC0_SWIACK MCF_REG08(0xFC0480E0) -#define MCF_INTC0_L1IACK MCF_REG08(0xFC0480E4) -#define MCF_INTC0_L2IACK MCF_REG08(0xFC0480E8) -#define MCF_INTC0_L3IACK MCF_REG08(0xFC0480EC) -#define MCF_INTC0_L4IACK MCF_REG08(0xFC0480F0) -#define MCF_INTC0_L5IACK MCF_REG08(0xFC0480F4) -#define MCF_INTC0_L6IACK MCF_REG08(0xFC0480F8) -#define MCF_INTC0_L7IACK MCF_REG08(0xFC0480FC) -#define MCF_INTC0_LIACK(x) MCF_REG08(0xFC0480E4+((x)*0x004)) -#define MCF_INTC1_IPRH MCF_REG32(0xFC04C000) -#define MCF_INTC1_IPRL MCF_REG32(0xFC04C004) -#define MCF_INTC1_IMRH MCF_REG32(0xFC04C008) -#define MCF_INTC1_IMRL MCF_REG32(0xFC04C00C) -#define MCF_INTC1_INTFRCH MCF_REG32(0xFC04C010) -#define MCF_INTC1_INTFRCL MCF_REG32(0xFC04C014) -#define MCF_INTC1_ICONFIG MCF_REG16(0xFC04C01A) -#define MCF_INTC1_SIMR MCF_REG08(0xFC04C01C) -#define MCF_INTC1_CIMR MCF_REG08(0xFC04C01D) -#define MCF_INTC1_CLMASK MCF_REG08(0xFC04C01E) -#define MCF_INTC1_SLMASK MCF_REG08(0xFC04C01F) -#define MCF_INTC1_ICR0 MCF_REG08(0xFC04C040) -#define MCF_INTC1_ICR1 MCF_REG08(0xFC04C041) -#define MCF_INTC1_ICR2 MCF_REG08(0xFC04C042) -#define MCF_INTC1_ICR3 MCF_REG08(0xFC04C043) -#define MCF_INTC1_ICR4 MCF_REG08(0xFC04C044) -#define MCF_INTC1_ICR5 MCF_REG08(0xFC04C045) -#define MCF_INTC1_ICR6 MCF_REG08(0xFC04C046) -#define MCF_INTC1_ICR7 MCF_REG08(0xFC04C047) -#define MCF_INTC1_ICR8 MCF_REG08(0xFC04C048) -#define MCF_INTC1_ICR9 MCF_REG08(0xFC04C049) -#define MCF_INTC1_ICR10 MCF_REG08(0xFC04C04A) -#define MCF_INTC1_ICR11 MCF_REG08(0xFC04C04B) -#define MCF_INTC1_ICR12 MCF_REG08(0xFC04C04C) -#define MCF_INTC1_ICR13 MCF_REG08(0xFC04C04D) -#define MCF_INTC1_ICR14 MCF_REG08(0xFC04C04E) -#define MCF_INTC1_ICR15 MCF_REG08(0xFC04C04F) -#define MCF_INTC1_ICR16 MCF_REG08(0xFC04C050) -#define MCF_INTC1_ICR17 MCF_REG08(0xFC04C051) -#define MCF_INTC1_ICR18 MCF_REG08(0xFC04C052) -#define MCF_INTC1_ICR19 MCF_REG08(0xFC04C053) -#define MCF_INTC1_ICR20 MCF_REG08(0xFC04C054) -#define MCF_INTC1_ICR21 MCF_REG08(0xFC04C055) -#define MCF_INTC1_ICR22 MCF_REG08(0xFC04C056) -#define MCF_INTC1_ICR23 MCF_REG08(0xFC04C057) -#define MCF_INTC1_ICR24 MCF_REG08(0xFC04C058) -#define MCF_INTC1_ICR25 MCF_REG08(0xFC04C059) -#define MCF_INTC1_ICR26 MCF_REG08(0xFC04C05A) -#define MCF_INTC1_ICR27 MCF_REG08(0xFC04C05B) -#define MCF_INTC1_ICR28 MCF_REG08(0xFC04C05C) -#define MCF_INTC1_ICR29 MCF_REG08(0xFC04C05D) -#define MCF_INTC1_ICR30 MCF_REG08(0xFC04C05E) -#define MCF_INTC1_ICR31 MCF_REG08(0xFC04C05F) -#define MCF_INTC1_ICR32 MCF_REG08(0xFC04C060) -#define MCF_INTC1_ICR33 MCF_REG08(0xFC04C061) -#define MCF_INTC1_ICR34 MCF_REG08(0xFC04C062) -#define MCF_INTC1_ICR35 MCF_REG08(0xFC04C063) -#define MCF_INTC1_ICR36 MCF_REG08(0xFC04C064) -#define MCF_INTC1_ICR37 MCF_REG08(0xFC04C065) -#define MCF_INTC1_ICR38 MCF_REG08(0xFC04C066) -#define MCF_INTC1_ICR39 MCF_REG08(0xFC04C067) -#define MCF_INTC1_ICR40 MCF_REG08(0xFC04C068) -#define MCF_INTC1_ICR41 MCF_REG08(0xFC04C069) -#define MCF_INTC1_ICR42 MCF_REG08(0xFC04C06A) -#define MCF_INTC1_ICR43 MCF_REG08(0xFC04C06B) -#define MCF_INTC1_ICR44 MCF_REG08(0xFC04C06C) -#define MCF_INTC1_ICR45 MCF_REG08(0xFC04C06D) -#define MCF_INTC1_ICR46 MCF_REG08(0xFC04C06E) -#define MCF_INTC1_ICR47 MCF_REG08(0xFC04C06F) -#define MCF_INTC1_ICR48 MCF_REG08(0xFC04C070) -#define MCF_INTC1_ICR49 MCF_REG08(0xFC04C071) -#define MCF_INTC1_ICR50 MCF_REG08(0xFC04C072) -#define MCF_INTC1_ICR51 MCF_REG08(0xFC04C073) -#define MCF_INTC1_ICR52 MCF_REG08(0xFC04C074) -#define MCF_INTC1_ICR53 MCF_REG08(0xFC04C075) -#define MCF_INTC1_ICR54 MCF_REG08(0xFC04C076) -#define MCF_INTC1_ICR55 MCF_REG08(0xFC04C077) -#define MCF_INTC1_ICR56 MCF_REG08(0xFC04C078) -#define MCF_INTC1_ICR57 MCF_REG08(0xFC04C079) -#define MCF_INTC1_ICR58 MCF_REG08(0xFC04C07A) -#define MCF_INTC1_ICR59 MCF_REG08(0xFC04C07B) -#define MCF_INTC1_ICR60 MCF_REG08(0xFC04C07C) -#define MCF_INTC1_ICR61 MCF_REG08(0xFC04C07D) -#define MCF_INTC1_ICR62 MCF_REG08(0xFC04C07E) -#define MCF_INTC1_ICR63 MCF_REG08(0xFC04C07F) -#define MCF_INTC1_ICR(x) MCF_REG08(0xFC04C040+((x)*0x001)) -#define MCF_INTC1_SWIACK MCF_REG08(0xFC04C0E0) -#define MCF_INTC1_L1IACK MCF_REG08(0xFC04C0E4) -#define MCF_INTC1_L2IACK MCF_REG08(0xFC04C0E8) -#define MCF_INTC1_L3IACK MCF_REG08(0xFC04C0EC) -#define MCF_INTC1_L4IACK MCF_REG08(0xFC04C0F0) -#define MCF_INTC1_L5IACK MCF_REG08(0xFC04C0F4) -#define MCF_INTC1_L6IACK MCF_REG08(0xFC04C0F8) -#define MCF_INTC1_L7IACK MCF_REG08(0xFC04C0FC) -#define MCF_INTC1_LIACK(x) MCF_REG08(0xFC04C0E4+((x)*0x004)) -#define MCF_INTC_IPRH(x) MCF_REG32(0xFC048000+((x)*0x4000)) -#define MCF_INTC_IPRL(x) MCF_REG32(0xFC048004+((x)*0x4000)) -#define MCF_INTC_IMRH(x) MCF_REG32(0xFC048008+((x)*0x4000)) -#define MCF_INTC_IMRL(x) MCF_REG32(0xFC04800C+((x)*0x4000)) -#define MCF_INTC_INTFRCH(x) MCF_REG32(0xFC048010+((x)*0x4000)) -#define MCF_INTC_INTFRCL(x) MCF_REG32(0xFC048014+((x)*0x4000)) -#define MCF_INTC_ICONFIG(x) MCF_REG16(0xFC04801A+((x)*0x4000)) -#define MCF_INTC_SIMR(x) MCF_REG08(0xFC04801C+((x)*0x4000)) -#define MCF_INTC_CIMR(x) MCF_REG08(0xFC04801D+((x)*0x4000)) -#define MCF_INTC_CLMASK(x) MCF_REG08(0xFC04801E+((x)*0x4000)) -#define MCF_INTC_SLMASK(x) MCF_REG08(0xFC04801F+((x)*0x4000)) -#define MCF_INTC_ICR0(x) MCF_REG08(0xFC048040+((x)*0x4000)) -#define MCF_INTC_ICR1(x) MCF_REG08(0xFC048041+((x)*0x4000)) -#define MCF_INTC_ICR2(x) MCF_REG08(0xFC048042+((x)*0x4000)) -#define MCF_INTC_ICR3(x) MCF_REG08(0xFC048043+((x)*0x4000)) -#define MCF_INTC_ICR4(x) MCF_REG08(0xFC048044+((x)*0x4000)) -#define MCF_INTC_ICR5(x) MCF_REG08(0xFC048045+((x)*0x4000)) -#define MCF_INTC_ICR6(x) MCF_REG08(0xFC048046+((x)*0x4000)) -#define MCF_INTC_ICR7(x) MCF_REG08(0xFC048047+((x)*0x4000)) -#define MCF_INTC_ICR8(x) MCF_REG08(0xFC048048+((x)*0x4000)) -#define MCF_INTC_ICR9(x) MCF_REG08(0xFC048049+((x)*0x4000)) -#define MCF_INTC_ICR10(x) MCF_REG08(0xFC04804A+((x)*0x4000)) -#define MCF_INTC_ICR11(x) MCF_REG08(0xFC04804B+((x)*0x4000)) -#define MCF_INTC_ICR12(x) MCF_REG08(0xFC04804C+((x)*0x4000)) -#define MCF_INTC_ICR13(x) MCF_REG08(0xFC04804D+((x)*0x4000)) -#define MCF_INTC_ICR14(x) MCF_REG08(0xFC04804E+((x)*0x4000)) -#define MCF_INTC_ICR15(x) MCF_REG08(0xFC04804F+((x)*0x4000)) -#define MCF_INTC_ICR16(x) MCF_REG08(0xFC048050+((x)*0x4000)) -#define MCF_INTC_ICR17(x) MCF_REG08(0xFC048051+((x)*0x4000)) -#define MCF_INTC_ICR18(x) MCF_REG08(0xFC048052+((x)*0x4000)) -#define MCF_INTC_ICR19(x) MCF_REG08(0xFC048053+((x)*0x4000)) -#define MCF_INTC_ICR20(x) MCF_REG08(0xFC048054+((x)*0x4000)) -#define MCF_INTC_ICR21(x) MCF_REG08(0xFC048055+((x)*0x4000)) -#define MCF_INTC_ICR22(x) MCF_REG08(0xFC048056+((x)*0x4000)) -#define MCF_INTC_ICR23(x) MCF_REG08(0xFC048057+((x)*0x4000)) -#define MCF_INTC_ICR24(x) MCF_REG08(0xFC048058+((x)*0x4000)) -#define MCF_INTC_ICR25(x) MCF_REG08(0xFC048059+((x)*0x4000)) -#define MCF_INTC_ICR26(x) MCF_REG08(0xFC04805A+((x)*0x4000)) -#define MCF_INTC_ICR27(x) MCF_REG08(0xFC04805B+((x)*0x4000)) -#define MCF_INTC_ICR28(x) MCF_REG08(0xFC04805C+((x)*0x4000)) -#define MCF_INTC_ICR29(x) MCF_REG08(0xFC04805D+((x)*0x4000)) -#define MCF_INTC_ICR30(x) MCF_REG08(0xFC04805E+((x)*0x4000)) -#define MCF_INTC_ICR31(x) MCF_REG08(0xFC04805F+((x)*0x4000)) -#define MCF_INTC_ICR32(x) MCF_REG08(0xFC048060+((x)*0x4000)) -#define MCF_INTC_ICR33(x) MCF_REG08(0xFC048061+((x)*0x4000)) -#define MCF_INTC_ICR34(x) MCF_REG08(0xFC048062+((x)*0x4000)) -#define MCF_INTC_ICR35(x) MCF_REG08(0xFC048063+((x)*0x4000)) -#define MCF_INTC_ICR36(x) MCF_REG08(0xFC048064+((x)*0x4000)) -#define MCF_INTC_ICR37(x) MCF_REG08(0xFC048065+((x)*0x4000)) -#define MCF_INTC_ICR38(x) MCF_REG08(0xFC048066+((x)*0x4000)) -#define MCF_INTC_ICR39(x) MCF_REG08(0xFC048067+((x)*0x4000)) -#define MCF_INTC_ICR40(x) MCF_REG08(0xFC048068+((x)*0x4000)) -#define MCF_INTC_ICR41(x) MCF_REG08(0xFC048069+((x)*0x4000)) -#define MCF_INTC_ICR42(x) MCF_REG08(0xFC04806A+((x)*0x4000)) -#define MCF_INTC_ICR43(x) MCF_REG08(0xFC04806B+((x)*0x4000)) -#define MCF_INTC_ICR44(x) MCF_REG08(0xFC04806C+((x)*0x4000)) -#define MCF_INTC_ICR45(x) MCF_REG08(0xFC04806D+((x)*0x4000)) -#define MCF_INTC_ICR46(x) MCF_REG08(0xFC04806E+((x)*0x4000)) -#define MCF_INTC_ICR47(x) MCF_REG08(0xFC04806F+((x)*0x4000)) -#define MCF_INTC_ICR48(x) MCF_REG08(0xFC048070+((x)*0x4000)) -#define MCF_INTC_ICR49(x) MCF_REG08(0xFC048071+((x)*0x4000)) -#define MCF_INTC_ICR50(x) MCF_REG08(0xFC048072+((x)*0x4000)) -#define MCF_INTC_ICR51(x) MCF_REG08(0xFC048073+((x)*0x4000)) -#define MCF_INTC_ICR52(x) MCF_REG08(0xFC048074+((x)*0x4000)) -#define MCF_INTC_ICR53(x) MCF_REG08(0xFC048075+((x)*0x4000)) -#define MCF_INTC_ICR54(x) MCF_REG08(0xFC048076+((x)*0x4000)) -#define MCF_INTC_ICR55(x) MCF_REG08(0xFC048077+((x)*0x4000)) -#define MCF_INTC_ICR56(x) MCF_REG08(0xFC048078+((x)*0x4000)) -#define MCF_INTC_ICR57(x) MCF_REG08(0xFC048079+((x)*0x4000)) -#define MCF_INTC_ICR58(x) MCF_REG08(0xFC04807A+((x)*0x4000)) -#define MCF_INTC_ICR59(x) MCF_REG08(0xFC04807B+((x)*0x4000)) -#define MCF_INTC_ICR60(x) MCF_REG08(0xFC04807C+((x)*0x4000)) -#define MCF_INTC_ICR61(x) MCF_REG08(0xFC04807D+((x)*0x4000)) -#define MCF_INTC_ICR62(x) MCF_REG08(0xFC04807E+((x)*0x4000)) -#define MCF_INTC_ICR63(x) MCF_REG08(0xFC04807F+((x)*0x4000)) -#define MCF_INTC_SWIACK(x) MCF_REG08(0xFC0480E0+((x)*0x4000)) -#define MCF_INTC_L1IACK(x) MCF_REG08(0xFC0480E4+((x)*0x4000)) -#define MCF_INTC_L2IACK(x) MCF_REG08(0xFC0480E8+((x)*0x4000)) -#define MCF_INTC_L3IACK(x) MCF_REG08(0xFC0480EC+((x)*0x4000)) -#define MCF_INTC_L4IACK(x) MCF_REG08(0xFC0480F0+((x)*0x4000)) -#define MCF_INTC_L5IACK(x) MCF_REG08(0xFC0480F4+((x)*0x4000)) -#define MCF_INTC_L6IACK(x) MCF_REG08(0xFC0480F8+((x)*0x4000)) -#define MCF_INTC_L7IACK(x) MCF_REG08(0xFC0480FC+((x)*0x4000)) - -/* Bit definitions and macros for MCF_INTC_IPRH */ -#define MCF_INTC_IPRH_INT32 (0x00000001) -#define MCF_INTC_IPRH_INT33 (0x00000002) -#define MCF_INTC_IPRH_INT34 (0x00000004) -#define MCF_INTC_IPRH_INT35 (0x00000008) -#define MCF_INTC_IPRH_INT36 (0x00000010) -#define MCF_INTC_IPRH_INT37 (0x00000020) -#define MCF_INTC_IPRH_INT38 (0x00000040) -#define MCF_INTC_IPRH_INT39 (0x00000080) -#define MCF_INTC_IPRH_INT40 (0x00000100) -#define MCF_INTC_IPRH_INT41 (0x00000200) -#define MCF_INTC_IPRH_INT42 (0x00000400) -#define MCF_INTC_IPRH_INT43 (0x00000800) -#define MCF_INTC_IPRH_INT44 (0x00001000) -#define MCF_INTC_IPRH_INT45 (0x00002000) -#define MCF_INTC_IPRH_INT46 (0x00004000) -#define MCF_INTC_IPRH_INT47 (0x00008000) -#define MCF_INTC_IPRH_INT48 (0x00010000) -#define MCF_INTC_IPRH_INT49 (0x00020000) -#define MCF_INTC_IPRH_INT50 (0x00040000) -#define MCF_INTC_IPRH_INT51 (0x00080000) -#define MCF_INTC_IPRH_INT52 (0x00100000) -#define MCF_INTC_IPRH_INT53 (0x00200000) -#define MCF_INTC_IPRH_INT54 (0x00400000) -#define MCF_INTC_IPRH_INT55 (0x00800000) -#define MCF_INTC_IPRH_INT56 (0x01000000) -#define MCF_INTC_IPRH_INT57 (0x02000000) -#define MCF_INTC_IPRH_INT58 (0x04000000) -#define MCF_INTC_IPRH_INT59 (0x08000000) -#define MCF_INTC_IPRH_INT60 (0x10000000) -#define MCF_INTC_IPRH_INT61 (0x20000000) -#define MCF_INTC_IPRH_INT62 (0x40000000) -#define MCF_INTC_IPRH_INT63 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_IPRL */ -#define MCF_INTC_IPRL_INT0 (0x00000001) -#define MCF_INTC_IPRL_INT1 (0x00000002) -#define MCF_INTC_IPRL_INT2 (0x00000004) -#define MCF_INTC_IPRL_INT3 (0x00000008) -#define MCF_INTC_IPRL_INT4 (0x00000010) -#define MCF_INTC_IPRL_INT5 (0x00000020) -#define MCF_INTC_IPRL_INT6 (0x00000040) -#define MCF_INTC_IPRL_INT7 (0x00000080) -#define MCF_INTC_IPRL_INT8 (0x00000100) -#define MCF_INTC_IPRL_INT9 (0x00000200) -#define MCF_INTC_IPRL_INT10 (0x00000400) -#define MCF_INTC_IPRL_INT11 (0x00000800) -#define MCF_INTC_IPRL_INT12 (0x00001000) -#define MCF_INTC_IPRL_INT13 (0x00002000) -#define MCF_INTC_IPRL_INT14 (0x00004000) -#define MCF_INTC_IPRL_INT15 (0x00008000) -#define MCF_INTC_IPRL_INT16 (0x00010000) -#define MCF_INTC_IPRL_INT17 (0x00020000) -#define MCF_INTC_IPRL_INT18 (0x00040000) -#define MCF_INTC_IPRL_INT19 (0x00080000) -#define MCF_INTC_IPRL_INT20 (0x00100000) -#define MCF_INTC_IPRL_INT21 (0x00200000) -#define MCF_INTC_IPRL_INT22 (0x00400000) -#define MCF_INTC_IPRL_INT23 (0x00800000) -#define MCF_INTC_IPRL_INT24 (0x01000000) -#define MCF_INTC_IPRL_INT25 (0x02000000) -#define MCF_INTC_IPRL_INT26 (0x04000000) -#define MCF_INTC_IPRL_INT27 (0x08000000) -#define MCF_INTC_IPRL_INT28 (0x10000000) -#define MCF_INTC_IPRL_INT29 (0x20000000) -#define MCF_INTC_IPRL_INT30 (0x40000000) -#define MCF_INTC_IPRL_INT31 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_IMRH */ -#define MCF_INTC_IMRH_INT_MASK32 (0x00000001) -#define MCF_INTC_IMRH_INT_MASK33 (0x00000002) -#define MCF_INTC_IMRH_INT_MASK34 (0x00000004) -#define MCF_INTC_IMRH_INT_MASK35 (0x00000008) -#define MCF_INTC_IMRH_INT_MASK36 (0x00000010) -#define MCF_INTC_IMRH_INT_MASK37 (0x00000020) -#define MCF_INTC_IMRH_INT_MASK38 (0x00000040) -#define MCF_INTC_IMRH_INT_MASK39 (0x00000080) -#define MCF_INTC_IMRH_INT_MASK40 (0x00000100) -#define MCF_INTC_IMRH_INT_MASK41 (0x00000200) -#define MCF_INTC_IMRH_INT_MASK42 (0x00000400) -#define MCF_INTC_IMRH_INT_MASK43 (0x00000800) -#define MCF_INTC_IMRH_INT_MASK44 (0x00001000) -#define MCF_INTC_IMRH_INT_MASK45 (0x00002000) -#define MCF_INTC_IMRH_INT_MASK46 (0x00004000) -#define MCF_INTC_IMRH_INT_MASK47 (0x00008000) -#define MCF_INTC_IMRH_INT_MASK48 (0x00010000) -#define MCF_INTC_IMRH_INT_MASK49 (0x00020000) -#define MCF_INTC_IMRH_INT_MASK50 (0x00040000) -#define MCF_INTC_IMRH_INT_MASK51 (0x00080000) -#define MCF_INTC_IMRH_INT_MASK52 (0x00100000) -#define MCF_INTC_IMRH_INT_MASK53 (0x00200000) -#define MCF_INTC_IMRH_INT_MASK54 (0x00400000) -#define MCF_INTC_IMRH_INT_MASK55 (0x00800000) -#define MCF_INTC_IMRH_INT_MASK56 (0x01000000) -#define MCF_INTC_IMRH_INT_MASK57 (0x02000000) -#define MCF_INTC_IMRH_INT_MASK58 (0x04000000) -#define MCF_INTC_IMRH_INT_MASK59 (0x08000000) -#define MCF_INTC_IMRH_INT_MASK60 (0x10000000) -#define MCF_INTC_IMRH_INT_MASK61 (0x20000000) -#define MCF_INTC_IMRH_INT_MASK62 (0x40000000) -#define MCF_INTC_IMRH_INT_MASK63 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_IMRL */ -#define MCF_INTC_IMRL_INT_MASK0 (0x00000001) -#define MCF_INTC_IMRL_INT_MASK1 (0x00000002) -#define MCF_INTC_IMRL_INT_MASK2 (0x00000004) -#define MCF_INTC_IMRL_INT_MASK3 (0x00000008) -#define MCF_INTC_IMRL_INT_MASK4 (0x00000010) -#define MCF_INTC_IMRL_INT_MASK5 (0x00000020) -#define MCF_INTC_IMRL_INT_MASK6 (0x00000040) -#define MCF_INTC_IMRL_INT_MASK7 (0x00000080) -#define MCF_INTC_IMRL_INT_MASK8 (0x00000100) -#define MCF_INTC_IMRL_INT_MASK9 (0x00000200) -#define MCF_INTC_IMRL_INT_MASK10 (0x00000400) -#define MCF_INTC_IMRL_INT_MASK11 (0x00000800) -#define MCF_INTC_IMRL_INT_MASK12 (0x00001000) -#define MCF_INTC_IMRL_INT_MASK13 (0x00002000) -#define MCF_INTC_IMRL_INT_MASK14 (0x00004000) -#define MCF_INTC_IMRL_INT_MASK15 (0x00008000) -#define MCF_INTC_IMRL_INT_MASK16 (0x00010000) -#define MCF_INTC_IMRL_INT_MASK17 (0x00020000) -#define MCF_INTC_IMRL_INT_MASK18 (0x00040000) -#define MCF_INTC_IMRL_INT_MASK19 (0x00080000) -#define MCF_INTC_IMRL_INT_MASK20 (0x00100000) -#define MCF_INTC_IMRL_INT_MASK21 (0x00200000) -#define MCF_INTC_IMRL_INT_MASK22 (0x00400000) -#define MCF_INTC_IMRL_INT_MASK23 (0x00800000) -#define MCF_INTC_IMRL_INT_MASK24 (0x01000000) -#define MCF_INTC_IMRL_INT_MASK25 (0x02000000) -#define MCF_INTC_IMRL_INT_MASK26 (0x04000000) -#define MCF_INTC_IMRL_INT_MASK27 (0x08000000) -#define MCF_INTC_IMRL_INT_MASK28 (0x10000000) -#define MCF_INTC_IMRL_INT_MASK29 (0x20000000) -#define MCF_INTC_IMRL_INT_MASK30 (0x40000000) -#define MCF_INTC_IMRL_INT_MASK31 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_INTFRCH */ -#define MCF_INTC_INTFRCH_INTFRC32 (0x00000001) -#define MCF_INTC_INTFRCH_INTFRC33 (0x00000002) -#define MCF_INTC_INTFRCH_INTFRC34 (0x00000004) -#define MCF_INTC_INTFRCH_INTFRC35 (0x00000008) -#define MCF_INTC_INTFRCH_INTFRC36 (0x00000010) -#define MCF_INTC_INTFRCH_INTFRC37 (0x00000020) -#define MCF_INTC_INTFRCH_INTFRC38 (0x00000040) -#define MCF_INTC_INTFRCH_INTFRC39 (0x00000080) -#define MCF_INTC_INTFRCH_INTFRC40 (0x00000100) -#define MCF_INTC_INTFRCH_INTFRC41 (0x00000200) -#define MCF_INTC_INTFRCH_INTFRC42 (0x00000400) -#define MCF_INTC_INTFRCH_INTFRC43 (0x00000800) -#define MCF_INTC_INTFRCH_INTFRC44 (0x00001000) -#define MCF_INTC_INTFRCH_INTFRC45 (0x00002000) -#define MCF_INTC_INTFRCH_INTFRC46 (0x00004000) -#define MCF_INTC_INTFRCH_INTFRC47 (0x00008000) -#define MCF_INTC_INTFRCH_INTFRC48 (0x00010000) -#define MCF_INTC_INTFRCH_INTFRC49 (0x00020000) -#define MCF_INTC_INTFRCH_INTFRC50 (0x00040000) -#define MCF_INTC_INTFRCH_INTFRC51 (0x00080000) -#define MCF_INTC_INTFRCH_INTFRC52 (0x00100000) -#define MCF_INTC_INTFRCH_INTFRC53 (0x00200000) -#define MCF_INTC_INTFRCH_INTFRC54 (0x00400000) -#define MCF_INTC_INTFRCH_INTFRC55 (0x00800000) -#define MCF_INTC_INTFRCH_INTFRC56 (0x01000000) -#define MCF_INTC_INTFRCH_INTFRC57 (0x02000000) -#define MCF_INTC_INTFRCH_INTFRC58 (0x04000000) -#define MCF_INTC_INTFRCH_INTFRC59 (0x08000000) -#define MCF_INTC_INTFRCH_INTFRC60 (0x10000000) -#define MCF_INTC_INTFRCH_INTFRC61 (0x20000000) -#define MCF_INTC_INTFRCH_INTFRC62 (0x40000000) -#define MCF_INTC_INTFRCH_INTFRC63 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_INTFRCL */ -#define MCF_INTC_INTFRCL_INTFRC0 (0x00000001) -#define MCF_INTC_INTFRCL_INTFRC1 (0x00000002) -#define MCF_INTC_INTFRCL_INTFRC2 (0x00000004) -#define MCF_INTC_INTFRCL_INTFRC3 (0x00000008) -#define MCF_INTC_INTFRCL_INTFRC4 (0x00000010) -#define MCF_INTC_INTFRCL_INTFRC5 (0x00000020) -#define MCF_INTC_INTFRCL_INTFRC6 (0x00000040) -#define MCF_INTC_INTFRCL_INTFRC7 (0x00000080) -#define MCF_INTC_INTFRCL_INTFRC8 (0x00000100) -#define MCF_INTC_INTFRCL_INTFRC9 (0x00000200) -#define MCF_INTC_INTFRCL_INTFRC10 (0x00000400) -#define MCF_INTC_INTFRCL_INTFRC11 (0x00000800) -#define MCF_INTC_INTFRCL_INTFRC12 (0x00001000) -#define MCF_INTC_INTFRCL_INTFRC13 (0x00002000) -#define MCF_INTC_INTFRCL_INTFRC14 (0x00004000) -#define MCF_INTC_INTFRCL_INTFRC15 (0x00008000) -#define MCF_INTC_INTFRCL_INTFRC16 (0x00010000) -#define MCF_INTC_INTFRCL_INTFRC17 (0x00020000) -#define MCF_INTC_INTFRCL_INTFRC18 (0x00040000) -#define MCF_INTC_INTFRCL_INTFRC19 (0x00080000) -#define MCF_INTC_INTFRCL_INTFRC20 (0x00100000) -#define MCF_INTC_INTFRCL_INTFRC21 (0x00200000) -#define MCF_INTC_INTFRCL_INTFRC22 (0x00400000) -#define MCF_INTC_INTFRCL_INTFRC23 (0x00800000) -#define MCF_INTC_INTFRCL_INTFRC24 (0x01000000) -#define MCF_INTC_INTFRCL_INTFRC25 (0x02000000) -#define MCF_INTC_INTFRCL_INTFRC26 (0x04000000) -#define MCF_INTC_INTFRCL_INTFRC27 (0x08000000) -#define MCF_INTC_INTFRCL_INTFRC28 (0x10000000) -#define MCF_INTC_INTFRCL_INTFRC29 (0x20000000) -#define MCF_INTC_INTFRCL_INTFRC30 (0x40000000) -#define MCF_INTC_INTFRCL_INTFRC31 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_ICONFIG */ -#define MCF_INTC_ICONFIG_EMASK (0x0020) -#define MCF_INTC_ICONFIG_ELVLPRI1 (0x0200) -#define MCF_INTC_ICONFIG_ELVLPRI2 (0x0400) -#define MCF_INTC_ICONFIG_ELVLPRI3 (0x0800) -#define MCF_INTC_ICONFIG_ELVLPRI4 (0x1000) -#define MCF_INTC_ICONFIG_ELVLPRI5 (0x2000) -#define MCF_INTC_ICONFIG_ELVLPRI6 (0x4000) -#define MCF_INTC_ICONFIG_ELVLPRI7 (0x8000) - -/* Bit definitions and macros for MCF_INTC_SIMR */ -#define MCF_INTC_SIMR_SIMR(x) (((x)&0x7F)<<0) - -/* Bit definitions and macros for MCF_INTC_CIMR */ -#define MCF_INTC_CIMR_CIMR(x) (((x)&0x7F)<<0) - -/* Bit definitions and macros for MCF_INTC_CLMASK */ -#define MCF_INTC_CLMASK_CLMASK(x) (((x)&0x0F)<<0) - -/* Bit definitions and macros for MCF_INTC_SLMASK */ -#define MCF_INTC_SLMASK_SLMASK(x) (((x)&0x0F)<<0) - -/* Bit definitions and macros for MCF_INTC_ICR */ -#define MCF_INTC_ICR_IL(x) (((x)&0x07)<<0) - -/* Bit definitions and macros for MCF_INTC_SWIACK */ -#define MCF_INTC_SWIACK_VECTOR(x) (((x)&0xFF)<<0) - -/* Bit definitions and macros for MCF_INTC_LIACK */ -#define MCF_INTC_LIACK_VECTOR(x) (((x)&0xFF)<<0) - -/********************************************************************/ -/********************************************************************* -* -* LCD Controller (LCDC) -* -*********************************************************************/ - -/* Register read/write macros */ -#define MCF_LCDC_LSSAR MCF_REG32(0xFC0AC000) -#define MCF_LCDC_LSR MCF_REG32(0xFC0AC004) -#define MCF_LCDC_LVPWR MCF_REG32(0xFC0AC008) -#define MCF_LCDC_LCPR MCF_REG32(0xFC0AC00C) -#define MCF_LCDC_LCWHBR MCF_REG32(0xFC0AC010) -#define MCF_LCDC_LCCMR MCF_REG32(0xFC0AC014) -#define MCF_LCDC_LPCR MCF_REG32(0xFC0AC018) -#define MCF_LCDC_LHCR MCF_REG32(0xFC0AC01C) -#define MCF_LCDC_LVCR MCF_REG32(0xFC0AC020) -#define MCF_LCDC_LPOR MCF_REG32(0xFC0AC024) -#define MCF_LCDC_LSCR MCF_REG32(0xFC0AC028) -#define MCF_LCDC_LPCCR MCF_REG32(0xFC0AC02C) -#define MCF_LCDC_LDCR MCF_REG32(0xFC0AC030) -#define MCF_LCDC_LRMCR MCF_REG32(0xFC0AC034) -#define MCF_LCDC_LICR MCF_REG32(0xFC0AC038) -#define MCF_LCDC_LIER MCF_REG32(0xFC0AC03C) -#define MCF_LCDC_LISR MCF_REG32(0xFC0AC040) -#define MCF_LCDC_LGWSAR MCF_REG32(0xFC0AC050) -#define MCF_LCDC_LGWSR MCF_REG32(0xFC0AC054) -#define MCF_LCDC_LGWVPWR MCF_REG32(0xFC0AC058) -#define MCF_LCDC_LGWPOR MCF_REG32(0xFC0AC05C) -#define MCF_LCDC_LGWPR MCF_REG32(0xFC0AC060) -#define MCF_LCDC_LGWCR MCF_REG32(0xFC0AC064) -#define MCF_LCDC_LGWDCR MCF_REG32(0xFC0AC068) -#define MCF_LCDC_BPLUT_BASE MCF_REG32(0xFC0AC800) -#define MCF_LCDC_GWLUT_BASE MCF_REG32(0xFC0ACC00) - -/* Bit definitions and macros for MCF_LCDC_LSSAR */ -#define MCF_LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2) - -/* Bit definitions and macros for MCF_LCDC_LSR */ -#define MCF_LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20) - -/* Bit definitions and macros for MCF_LCDC_LVPWR */ -#define MCF_LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0) - -/* Bit definitions and macros for MCF_LCDC_LCPR */ -#define MCF_LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16) -#define MCF_LCDC_LCPR_OP (0x10000000) -#define MCF_LCDC_LCPR_CC(x) (((x)&0x00000003)<<30) -#define MCF_LCDC_LCPR_CC_TRANSPARENT (0x00000000) -#define MCF_LCDC_LCPR_CC_OR (0x40000000) -#define MCF_LCDC_LCPR_CC_XOR (0x80000000) -#define MCF_LCDC_LCPR_CC_AND (0xC0000000) -#define MCF_LCDC_LCPR_OP_ON (0x10000000) -#define MCF_LCDC_LCPR_OP_OFF (0x00000000) - -/* Bit definitions and macros for MCF_LCDC_LCWHBR */ -#define MCF_LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16) -#define MCF_LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24) -#define MCF_LCDC_LCWHBR_BK_EN (0x80000000) -#define MCF_LCDC_LCWHBR_BK_EN_ON (0x80000000) -#define MCF_LCDC_LCWHBR_BK_EN_OFF (0x00000000) - -/* Bit definitions and macros for MCF_LCDC_LCCMR */ -#define MCF_LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0) -#define MCF_LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6) -#define MCF_LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12) - -/* Bit definitions and macros for MCF_LCDC_LPCR */ -#define MCF_LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0) -#define MCF_LCDC_LPCR_SHARP (0x00000040) -#define MCF_LCDC_LPCR_SCLKSEL (0x00000080) -#define MCF_LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8) -#define MCF_LCDC_LPCR_ACDSEL (0x00008000) -#define MCF_LCDC_LPCR_REV_VS (0x00010000) -#define MCF_LCDC_LPCR_SWAP_SEL (0x00020000) -#define MCF_LCDC_LPCR_ENDSEL (0x00040000) -#define MCF_LCDC_LPCR_SCLKIDLE (0x00080000) -#define MCF_LCDC_LPCR_OEPOL (0x00100000) -#define MCF_LCDC_LPCR_CLKPOL (0x00200000) -#define MCF_LCDC_LPCR_LPPOL (0x00400000) -#define MCF_LCDC_LPCR_FLM (0x00800000) -#define MCF_LCDC_LPCR_PIXPOL (0x01000000) -#define MCF_LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25) -#define MCF_LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28) -#define MCF_LCDC_LPCR_COLOR (0x40000000) -#define MCF_LCDC_LPCR_TFT (0x80000000) -#define MCF_LCDC_LPCR_MODE_MONOCGROME (0x00000000) -#define MCF_LCDC_LPCR_MODE_CSTN (0x40000000) -#define MCF_LCDC_LPCR_MODE_TFT (0xC0000000) -#define MCF_LCDC_LPCR_PBSIZ_1 (0x00000000) -#define MCF_LCDC_LPCR_PBSIZ_2 (0x10000000) -#define MCF_LCDC_LPCR_PBSIZ_4 (0x20000000) -#define MCF_LCDC_LPCR_PBSIZ_8 (0x30000000) -#define MCF_LCDC_LPCR_BPIX_1bpp (0x00000000) -#define MCF_LCDC_LPCR_BPIX_2bpp (0x02000000) -#define MCF_LCDC_LPCR_BPIX_4bpp (0x04000000) -#define MCF_LCDC_LPCR_BPIX_8bpp (0x06000000) -#define MCF_LCDC_LPCR_BPIX_12bpp (0x08000000) -#define MCF_LCDC_LPCR_BPIX_16bpp (0x0A000000) -#define MCF_LCDC_LPCR_BPIX_18bpp (0x0C000000) - -#define MCF_LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30) - -/* Bit definitions and macros for MCF_LCDC_LHCR */ -#define MCF_LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8) -#define MCF_LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26) - -/* Bit definitions and macros for MCF_LCDC_LVCR */ -#define MCF_LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8) -#define MCF_LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26) - -/* Bit definitions and macros for MCF_LCDC_LPOR */ -#define MCF_LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0) - -/* Bit definitions and macros for MCF_LCDC_LPCCR */ -#define MCF_LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LPCCR_CC_EN (0x00000100) -#define MCF_LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9) -#define MCF_LCDC_LPCCR_LDMSK (0x00008000) -#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16) -#define MCF_LCDC_LPCCR_SCR_LINEPULSE (0x00000000) -#define MCF_LCDC_LPCCR_SCR_PIXELCLK (0x00002000) -#define MCF_LCDC_LPCCR_SCR_LCDCLOCK (0x00004000) - -/* Bit definitions and macros for MCF_LCDC_LDCR */ -#define MCF_LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0) -#define MCF_LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16) -#define MCF_LCDC_LDCR_BURST (0x80000000) - -/* Bit definitions and macros for MCF_LCDC_LRMCR */ -#define MCF_LCDC_LRMCR_SEL_REF (0x00000001) - -/* Bit definitions and macros for MCF_LCDC_LICR */ -#define MCF_LCDC_LICR_INTCON (0x00000001) -#define MCF_LCDC_LICR_INTSYN (0x00000004) -#define MCF_LCDC_LICR_GW_INT_CON (0x00000010) - -/* Bit definitions and macros for MCF_LCDC_LIER */ -#define MCF_LCDC_LIER_BOF_EN (0x00000001) -#define MCF_LCDC_LIER_EOF_EN (0x00000002) -#define MCF_LCDC_LIER_ERR_RES_EN (0x00000004) -#define MCF_LCDC_LIER_UDR_ERR_EN (0x00000008) -#define MCF_LCDC_LIER_GW_BOF_EN (0x00000010) -#define MCF_LCDC_LIER_GW_EOF_EN (0x00000020) -#define MCF_LCDC_LIER_GW_ERR_RES_EN (0x00000040) -#define MCF_LCDC_LIER_GW_UDR_ERR_EN (0x00000080) - -/* Bit definitions and macros for MCF_LCDC_LISR */ -#define MCF_LCDC_LISR_BOF (0x00000001) -#define MCF_LCDC_LISR_EOF (0x00000002) -#define MCF_LCDC_LISR_ERR_RES (0x00000004) -#define MCF_LCDC_LISR_UDR_ERR (0x00000008) -#define MCF_LCDC_LISR_GW_BOF (0x00000010) -#define MCF_LCDC_LISR_GW_EOF (0x00000020) -#define MCF_LCDC_LISR_GW_ERR_RES (0x00000040) -#define MCF_LCDC_LISR_GW_UDR_ERR (0x00000080) - -/* Bit definitions and macros for MCF_LCDC_LGWSAR */ -#define MCF_LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2) - -/* Bit definitions and macros for MCF_LCDC_LGWSR */ -#define MCF_LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20) - -/* Bit definitions and macros for MCF_LCDC_LGWVPWR */ -#define MCF_LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0) - -/* Bit definitions and macros for MCF_LCDC_LGWPOR */ -#define MCF_LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0) - -/* Bit definitions and macros for MCF_LCDC_LGWPR */ -#define MCF_LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16) - -/* Bit definitions and macros for MCF_LCDC_LGWCR */ -#define MCF_LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0) -#define MCF_LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6) -#define MCF_LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12) -#define MCF_LCDC_LGWCR_GW_RVS (0x00200000) -#define MCF_LCDC_LGWCR_GWE (0x00400000) -#define MCF_LCDC_LGWCR_GWCKE (0x00800000) -#define MCF_LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24) - -/* Bit definitions and macros for MCF_LCDC_LGWDCR */ -#define MCF_LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0) -#define MCF_LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16) -#define MCF_LCDC_LGWDCR_GWBT (0x80000000) - -/* Bit definitions and macros for MCF_LCDC_LSCR */ -#define MCF_LCDC_LSCR_PS_RISE_DELAY(x) (((x)&0x0000003F)<<26) -#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x) (((x)&0x000000FF)<<16) -#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8) -#define MCF_LCDC_LSCR_GRAY_2(x) (((x)&0x0000000F)<<4) -#define MCF_LCDC_LSCR_GRAY_1(x) (((x)&0x0000000F)<<0) - -/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */ -#define MCF_LCDC_BPLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) - -/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */ -#define MCF_LCDC_GWLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) - -/********************************************************************* - * - * Phase Locked Loop (PLL) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_PLL_PODR MCF_REG08(0xFC0C0000) -#define MCF_PLL_PLLCR MCF_REG08(0xFC0C0004) -#define MCF_PLL_PMDR MCF_REG08(0xFC0C0008) -#define MCF_PLL_PFDR MCF_REG08(0xFC0C000C) - -/* Bit definitions and macros for MCF_PLL_PODR */ -#define MCF_PLL_PODR_BUSDIV(x) (((x)&0x0F)<<0) -#define MCF_PLL_PODR_CPUDIV(x) (((x)&0x0F)<<4) - -/* Bit definitions and macros for MCF_PLL_PLLCR */ -#define MCF_PLL_PLLCR_DITHDEV(x) (((x)&0x07)<<0) -#define MCF_PLL_PLLCR_DITHEN (0x80) - -/* Bit definitions and macros for MCF_PLL_PMDR */ -#define MCF_PLL_PMDR_MODDIV(x) (((x)&0xFF)<<0) - -/* Bit definitions and macros for MCF_PLL_PFDR */ -#define MCF_PLL_PFDR_MFD(x) (((x)&0xFF)<<0) - -/********************************************************************* - * - * System Control Module Registers (SCM) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_SCM_MPR MCF_REG32(0xFC000000) -#define MCF_SCM_PACRA MCF_REG32(0xFC000020) -#define MCF_SCM_PACRB MCF_REG32(0xFC000024) -#define MCF_SCM_PACRC MCF_REG32(0xFC000028) -#define MCF_SCM_PACRD MCF_REG32(0xFC00002C) -#define MCF_SCM_PACRE MCF_REG32(0xFC000040) -#define MCF_SCM_PACRF MCF_REG32(0xFC000044) - -#define MCF_SCM_BCR MCF_REG32(0xFC040024) - -/********************************************************************* - * - * SDRAM Controller (SDRAMC) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_SDRAMC_SDMR MCF_REG32(0xFC0B8000) -#define MCF_SDRAMC_SDCR MCF_REG32(0xFC0B8004) -#define MCF_SDRAMC_SDCFG1 MCF_REG32(0xFC0B8008) -#define MCF_SDRAMC_SDCFG2 MCF_REG32(0xFC0B800C) -#define MCF_SDRAMC_LIMP_FIX MCF_REG32(0xFC0B8080) -#define MCF_SDRAMC_SDDS MCF_REG32(0xFC0B8100) -#define MCF_SDRAMC_SDCS0 MCF_REG32(0xFC0B8110) -#define MCF_SDRAMC_SDCS1 MCF_REG32(0xFC0B8114) -#define MCF_SDRAMC_SDCS2 MCF_REG32(0xFC0B8118) -#define MCF_SDRAMC_SDCS3 MCF_REG32(0xFC0B811C) -#define MCF_SDRAMC_SDCS(x) MCF_REG32(0xFC0B8110+((x)*0x004)) - -/* Bit definitions and macros for MCF_SDRAMC_SDMR */ -#define MCF_SDRAMC_SDMR_CMD (0x00010000) -#define MCF_SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) -#define MCF_SDRAMC_SDMR_BNKAD(x) (((x)&0x00000003)<<30) -#define MCF_SDRAMC_SDMR_BNKAD_LMR (0x00000000) -#define MCF_SDRAMC_SDMR_BNKAD_LEMR (0x40000000) - -/* Bit definitions and macros for MCF_SDRAMC_SDCR */ -#define MCF_SDRAMC_SDCR_IPALL (0x00000002) -#define MCF_SDRAMC_SDCR_IREF (0x00000004) -#define MCF_SDRAMC_SDCR_DQS_OE(x) (((x)&0x0000000F)<<8) -#define MCF_SDRAMC_SDCR_PS(x) (((x)&0x00000003)<<12) -#define MCF_SDRAMC_SDCR_RCNT(x) (((x)&0x0000003F)<<16) -#define MCF_SDRAMC_SDCR_OE_RULE (0x00400000) -#define MCF_SDRAMC_SDCR_MUX(x) (((x)&0x00000003)<<24) -#define MCF_SDRAMC_SDCR_REF (0x10000000) -#define MCF_SDRAMC_SDCR_DDR (0x20000000) -#define MCF_SDRAMC_SDCR_CKE (0x40000000) -#define MCF_SDRAMC_SDCR_MODE_EN (0x80000000) -#define MCF_SDRAMC_SDCR_PS_16 (0x00002000) -#define MCF_SDRAMC_SDCR_PS_32 (0x00000000) - -/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */ -#define MCF_SDRAMC_SDCFG1_WTLAT(x) (((x)&0x00000007)<<4) -#define MCF_SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) -#define MCF_SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) -#define MCF_SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) -#define MCF_SDRAMC_SDCFG1_RDLAT(x) (((x)&0x0000000F)<<20) -#define MCF_SDRAMC_SDCFG1_SWT2RD(x) (((x)&0x00000007)<<24) -#define MCF_SDRAMC_SDCFG1_SRD2RW(x) (((x)&0x0000000F)<<28) - -/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */ -#define MCF_SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) -#define MCF_SDRAMC_SDCFG2_BRD2WT(x) (((x)&0x0000000F)<<20) -#define MCF_SDRAMC_SDCFG2_BWT2RW(x) (((x)&0x0000000F)<<24) -#define MCF_SDRAMC_SDCFG2_BRD2PRE(x) (((x)&0x0000000F)<<28) - -/* Device Errata - LIMP mode work around */ -#define MCF_SDRAMC_REFRESH (0x40000000) - -/* Bit definitions and macros for MCF_SDRAMC_SDDS */ -#define MCF_SDRAMC_SDDS_SB_D(x) (((x)&0x00000003)<<0) -#define MCF_SDRAMC_SDDS_SB_S(x) (((x)&0x00000003)<<2) -#define MCF_SDRAMC_SDDS_SB_A(x) (((x)&0x00000003)<<4) -#define MCF_SDRAMC_SDDS_SB_C(x) (((x)&0x00000003)<<6) -#define MCF_SDRAMC_SDDS_SB_E(x) (((x)&0x00000003)<<8) - -/* Bit definitions and macros for MCF_SDRAMC_SDCS */ -#define MCF_SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)<<0) -#define MCF_SDRAMC_SDCS_BASE(x) (((x)&0x00000FFF)<<20) -#define MCF_SDRAMC_SDCS_BA(x) ((x)&0xFFF00000) -#define MCF_SDRAMC_SDCS_CSSZ_DIABLE (0x00000000) -#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) -#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) -#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) -#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) -#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) -#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) -#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) -#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) -#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) -#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) -#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) -#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) -#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) - -/********************************************************************* - * - * FlexCAN module registers - * - *********************************************************************/ -#define MCF_FLEXCAN_BASEADDR(x) (0xFC020000+(x)*0x0800) -#define MCF_FLEXCAN_CANMCR(x) MCF_REG32(0xFC020000+(x)*0x0800+0x00) -#define MCF_FLEXCAN_CANCTRL(x) MCF_REG32(0xFC020000+(x)*0x0800+0x04) -#define MCF_FLEXCAN_TIMER(x) MCF_REG32(0xFC020000+(x)*0x0800+0x08) -#define MCF_FLEXCAN_RXGMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x10) -#define MCF_FLEXCAN_RX14MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x14) -#define MCF_FLEXCAN_RX15MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x18) -#define MCF_FLEXCAN_ERRCNT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x1C) -#define MCF_FLEXCAN_ERRSTAT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x20) -#define MCF_FLEXCAN_IMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x28) -#define MCF_FLEXCAN_IFLAG(x) MCF_REG32(0xFC020000+(x)*0x0800+0x30) - -#define MCF_FLEXCAN_MB_CNT(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0) -#define MCF_FLEXCAN_MB_ID(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4) -#define MCF_FLEXCAN_MB_DB(x,y,z) MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1) - -/* - * FlexCAN Module Configuration Register - */ -#define CANMCR_MDIS (0x80000000) -#define CANMCR_FRZ (0x40000000) -#define CANMCR_HALT (0x10000000) -#define CANMCR_SOFTRST (0x02000000) -#define CANMCR_FRZACK (0x01000000) -#define CANMCR_SUPV (0x00800000) -#define CANMCR_MAXMB(x) ((x)&0x0F) - -/* - * FlexCAN Control Register - */ -#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) -#define CANCTRL_RJW(x) (((x)&0x03)<<22) -#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) -#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) -#define CANCTRL_BOFFMSK (0x00008000) -#define CANCTRL_ERRMSK (0x00004000) -#define CANCTRL_CLKSRC (0x00002000) -#define CANCTRL_LPB (0x00001000) -#define CANCTRL_SAMP (0x00000080) -#define CANCTRL_BOFFREC (0x00000040) -#define CANCTRL_TSYNC (0x00000020) -#define CANCTRL_LBUF (0x00000010) -#define CANCTRL_LOM (0x00000008) -#define CANCTRL_PROPSEG(x) ((x)&0x07) - -/* - * FlexCAN Error Counter Register - */ -#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) -#define ERRCNT_TXECTR(x) ((x)&0xFF) - -/* - * FlexCAN Error and Status Register - */ -#define ERRSTAT_BITERR(x) (((x)&0x03)<<14) -#define ERRSTAT_ACKERR (0x00002000) -#define ERRSTAT_CRCERR (0x00001000) -#define ERRSTAT_FRMERR (0x00000800) -#define ERRSTAT_STFERR (0x00000400) -#define ERRSTAT_TXWRN (0x00000200) -#define ERRSTAT_RXWRN (0x00000100) -#define ERRSTAT_IDLE (0x00000080) -#define ERRSTAT_TXRX (0x00000040) -#define ERRSTAT_FLTCONF(x) (((x)&0x03)<<4) -#define ERRSTAT_BOFFINT (0x00000004) -#define ERRSTAT_ERRINT (0x00000002) - -/* - * Interrupt Mask Register - */ -#define IMASK_BUF15M (0x8000) -#define IMASK_BUF14M (0x4000) -#define IMASK_BUF13M (0x2000) -#define IMASK_BUF12M (0x1000) -#define IMASK_BUF11M (0x0800) -#define IMASK_BUF10M (0x0400) -#define IMASK_BUF9M (0x0200) -#define IMASK_BUF8M (0x0100) -#define IMASK_BUF7M (0x0080) -#define IMASK_BUF6M (0x0040) -#define IMASK_BUF5M (0x0020) -#define IMASK_BUF4M (0x0010) -#define IMASK_BUF3M (0x0008) -#define IMASK_BUF2M (0x0004) -#define IMASK_BUF1M (0x0002) -#define IMASK_BUF0M (0x0001) -#define IMASK_BUFnM(x) (0x1<<(x)) -#define IMASK_BUFF_ENABLE_ALL (0x1111) -#define IMASK_BUFF_DISABLE_ALL (0x0000) - -/* - * Interrupt Flag Register - */ -#define IFLAG_BUF15M (0x8000) -#define IFLAG_BUF14M (0x4000) -#define IFLAG_BUF13M (0x2000) -#define IFLAG_BUF12M (0x1000) -#define IFLAG_BUF11M (0x0800) -#define IFLAG_BUF10M (0x0400) -#define IFLAG_BUF9M (0x0200) -#define IFLAG_BUF8M (0x0100) -#define IFLAG_BUF7M (0x0080) -#define IFLAG_BUF6M (0x0040) -#define IFLAG_BUF5M (0x0020) -#define IFLAG_BUF4M (0x0010) -#define IFLAG_BUF3M (0x0008) -#define IFLAG_BUF2M (0x0004) -#define IFLAG_BUF1M (0x0002) -#define IFLAG_BUF0M (0x0001) -#define IFLAG_BUFF_SET_ALL (0xFFFF) -#define IFLAG_BUFF_CLEAR_ALL (0x0000) -#define IFLAG_BUFnM(x) (0x1<<(x)) - -/* - * Message Buffers - */ -#define MB_CNT_CODE(x) (((x)&0x0F)<<24) -#define MB_CNT_SRR (0x00400000) -#define MB_CNT_IDE (0x00200000) -#define MB_CNT_RTR (0x00100000) -#define MB_CNT_LENGTH(x) (((x)&0x0F)<<16) -#define MB_CNT_TIMESTAMP(x) ((x)&0xFFFF) -#define MB_ID_STD(x) (((x)&0x07FF)<<18) -#define MB_ID_EXT(x) ((x)&0x3FFFF) - -/********************************************************************* - * - * Edge Port Module (EPORT) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000) -#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002) -#define MCF_EPORT_EPIER MCF_REG08(0xFC094003) -#define MCF_EPORT_EPDR MCF_REG08(0xFC094004) -#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005) -#define MCF_EPORT_EPFR MCF_REG08(0xFC094006) - -/* Bit definitions and macros for MCF_EPORT_EPPAR */ -#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) -#define MCF_EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4) -#define MCF_EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6) -#define MCF_EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8) -#define MCF_EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10) -#define MCF_EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12) -#define MCF_EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14) -#define MCF_EPORT_EPPAR_LEVEL (0) -#define MCF_EPORT_EPPAR_RISING (1) -#define MCF_EPORT_EPPAR_FALLING (2) -#define MCF_EPORT_EPPAR_BOTH (3) -#define MCF_EPORT_EPPAR_EPPA7_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA7_RISING (0x4000) -#define MCF_EPORT_EPPAR_EPPA7_FALLING (0x8000) -#define MCF_EPORT_EPPAR_EPPA7_BOTH (0xC000) -#define MCF_EPORT_EPPAR_EPPA6_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA6_RISING (0x1000) -#define MCF_EPORT_EPPAR_EPPA6_FALLING (0x2000) -#define MCF_EPORT_EPPAR_EPPA6_BOTH (0x3000) -#define MCF_EPORT_EPPAR_EPPA5_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA5_RISING (0x0400) -#define MCF_EPORT_EPPAR_EPPA5_FALLING (0x0800) -#define MCF_EPORT_EPPAR_EPPA5_BOTH (0x0C00) -#define MCF_EPORT_EPPAR_EPPA4_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA4_RISING (0x0100) -#define MCF_EPORT_EPPAR_EPPA4_FALLING (0x0200) -#define MCF_EPORT_EPPAR_EPPA4_BOTH (0x0300) -#define MCF_EPORT_EPPAR_EPPA3_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA3_RISING (0x0040) -#define MCF_EPORT_EPPAR_EPPA3_FALLING (0x0080) -#define MCF_EPORT_EPPAR_EPPA3_BOTH (0x00C0) -#define MCF_EPORT_EPPAR_EPPA2_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA2_RISING (0x0010) -#define MCF_EPORT_EPPAR_EPPA2_FALLING (0x0020) -#define MCF_EPORT_EPPAR_EPPA2_BOTH (0x0030) -#define MCF_EPORT_EPPAR_EPPA1_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA1_RISING (0x0004) -#define MCF_EPORT_EPPAR_EPPA1_FALLING (0x0008) -#define MCF_EPORT_EPPAR_EPPA1_BOTH (0x000C) - -/* Bit definitions and macros for MCF_EPORT_EPDDR */ -#define MCF_EPORT_EPDDR_EPDD1 (0x02) -#define MCF_EPORT_EPDDR_EPDD2 (0x04) -#define MCF_EPORT_EPDDR_EPDD3 (0x08) -#define MCF_EPORT_EPDDR_EPDD4 (0x10) -#define MCF_EPORT_EPDDR_EPDD5 (0x20) -#define MCF_EPORT_EPDDR_EPDD6 (0x40) -#define MCF_EPORT_EPDDR_EPDD7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPIER */ -#define MCF_EPORT_EPIER_EPIE1 (0x02) -#define MCF_EPORT_EPIER_EPIE2 (0x04) -#define MCF_EPORT_EPIER_EPIE3 (0x08) -#define MCF_EPORT_EPIER_EPIE4 (0x10) -#define MCF_EPORT_EPIER_EPIE5 (0x20) -#define MCF_EPORT_EPIER_EPIE6 (0x40) -#define MCF_EPORT_EPIER_EPIE7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPDR */ -#define MCF_EPORT_EPDR_EPD1 (0x02) -#define MCF_EPORT_EPDR_EPD2 (0x04) -#define MCF_EPORT_EPDR_EPD3 (0x08) -#define MCF_EPORT_EPDR_EPD4 (0x10) -#define MCF_EPORT_EPDR_EPD5 (0x20) -#define MCF_EPORT_EPDR_EPD6 (0x40) -#define MCF_EPORT_EPDR_EPD7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPPDR */ -#define MCF_EPORT_EPPDR_EPPD1 (0x02) -#define MCF_EPORT_EPPDR_EPPD2 (0x04) -#define MCF_EPORT_EPPDR_EPPD3 (0x08) -#define MCF_EPORT_EPPDR_EPPD4 (0x10) -#define MCF_EPORT_EPPDR_EPPD5 (0x20) -#define MCF_EPORT_EPPDR_EPPD6 (0x40) -#define MCF_EPORT_EPPDR_EPPD7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPFR */ -#define MCF_EPORT_EPFR_EPF1 (0x02) -#define MCF_EPORT_EPFR_EPF2 (0x04) -#define MCF_EPORT_EPFR_EPF3 (0x08) -#define MCF_EPORT_EPFR_EPF4 (0x10) -#define MCF_EPORT_EPFR_EPF5 (0x20) -#define MCF_EPORT_EPFR_EPF6 (0x40) -#define MCF_EPORT_EPFR_EPF7 (0x80) - -/********************************************************************/ -#endif /* m532xsim_h */ diff --git a/include/asm-m68knommu/m5407sim.h b/include/asm-m68knommu/m5407sim.h deleted file mode 100644 index cc22c4a53005..000000000000 --- a/include/asm-m68knommu/m5407sim.h +++ /dev/null @@ -1,157 +0,0 @@ -/****************************************************************************/ - -/* - * m5407sim.h -- ColdFire 5407 System Integration Module support. - * - * (C) Copyright 2000, Lineo (www.lineo.com) - * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd. - * - * Modified by David W. Miller for the MCF5307 Eval Board. - */ - -/****************************************************************************/ -#ifndef m5407sim_h -#define m5407sim_h -/****************************************************************************/ - -/* - * Define the 5407 SIM register set addresses. - */ -#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ -#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ -#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ -#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ -#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ -#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ -#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ -#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ -#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ - -#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ - -#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ -#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */ -#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */ -#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */ -#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ - -#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ -#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ - -#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ -#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ - - -/* - * Some symbol defines for the above... - */ -#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ -#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ -#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ -#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ -#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ - -/* - * Macro to set IMR register. It is 32 bits on the 5407. - */ -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - - -/* - * Some symbol defines for the Parallel Port Pin Assignment Register - */ -#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */ - /* Clear to select par I/O */ -#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */ - /* Clear to select par I/O */ - -/* - * Defines for the IRQPAR Register - */ -#define IRQ5_LEVEL4 0x80 -#define IRQ3_LEVEL6 0x40 -#define IRQ1_LEVEL2 0x20 - - -/* - * Define the Cache register flags. - */ -#define CACR_DEC 0x80000000 /* Enable data cache */ -#define CACR_DWP 0x40000000 /* Data write protection */ -#define CACR_DESB 0x20000000 /* Enable data store buffer */ -#define CACR_DDPI 0x10000000 /* Disable CPUSHL */ -#define CACR_DHCLK 0x08000000 /* Half data cache lock mode */ -#define CACR_DDCM_WT 0x00000000 /* Write through cache*/ -#define CACR_DDCM_CP 0x02000000 /* Copyback cache */ -#define CACR_DDCM_P 0x04000000 /* No cache, precise */ -#define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */ -#define CACR_DCINVA 0x01000000 /* Invalidate data cache */ -#define CACR_BEC 0x00080000 /* Enable branch cache */ -#define CACR_BCINVA 0x00040000 /* Invalidate branch cache */ -#define CACR_IEC 0x00008000 /* Enable instruction cache */ -#define CACR_DNFB 0x00002000 /* Inhibited fill buffer */ -#define CACR_IDPI 0x00001000 /* Disable CPUSHL */ -#define CACR_IHLCK 0x00000800 /* Intruction cache half lock */ -#define CACR_IDCM 0x00000400 /* Intruction cache inhibit */ -#define CACR_ICINVA 0x00000100 /* Invalidate instr cache */ - -#define ACR_BASE_POS 24 /* Address Base */ -#define ACR_MASK_POS 16 /* Address Mask */ -#define ACR_ENABLE 0x00008000 /* Enable address */ -#define ACR_USER 0x00000000 /* User mode access only */ -#define ACR_SUPER 0x00002000 /* Supervisor mode only */ -#define ACR_ANY 0x00004000 /* Match any access mode */ -#define ACR_CM_WT 0x00000000 /* Write through mode */ -#define ACR_CM_CP 0x00000020 /* Copyback mode */ -#define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */ -#define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */ -#define ACR_WPROTECT 0x00000004 /* Write protect */ - -/****************************************************************************/ -#endif /* m5407sim_h */ diff --git a/include/asm-m68knommu/m68360.h b/include/asm-m68knommu/m68360.h deleted file mode 100644 index eb7d39ef2855..000000000000 --- a/include/asm-m68knommu/m68360.h +++ /dev/null @@ -1,13 +0,0 @@ -#include "m68360_regs.h" -#include "m68360_pram.h" -#include "m68360_quicc.h" -#include "m68360_enet.h" - -#ifdef CONFIG_M68360 - -#define CPM_INTERRUPT 4 - -/* see MC68360 User's Manual, p. 7-377 */ -#define CPM_VECTOR_BASE 0x04 /* 3 MSbits of CPM vector */ - -#endif /* CONFIG_M68360 */ diff --git a/include/asm-m68knommu/m68360_enet.h b/include/asm-m68knommu/m68360_enet.h deleted file mode 100644 index c36f4d059203..000000000000 --- a/include/asm-m68knommu/m68360_enet.h +++ /dev/null @@ -1,177 +0,0 @@ -/*********************************** - * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ - *********************************** - * - *************************************** - * Definitions for the ETHERNET controllers - *************************************** - */ - -#ifndef __ETHER_H -#define __ETHER_H - -#include "quicc_simple.h" - -/* - * transmit BD's - */ -#define T_R 0x8000 /* ready bit */ -#define E_T_PAD 0x4000 /* short frame padding */ -#define T_W 0x2000 /* wrap bit */ -#define T_I 0x1000 /* interrupt on completion */ -#define T_L 0x0800 /* last in frame */ -#define T_TC 0x0400 /* transmit CRC (when last) */ - -#define T_DEF 0x0200 /* defer indication */ -#define T_HB 0x0100 /* heartbeat */ -#define T_LC 0x0080 /* error: late collision */ -#define T_RL 0x0040 /* error: retransmission limit */ -#define T_RC 0x003c /* retry count */ -#define T_UN 0x0002 /* error: underrun */ -#define T_CSL 0x0001 /* carier sense lost */ -#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL) - -/* - * receive BD's - */ -#define R_E 0x8000 /* buffer empty */ -#define R_W 0x2000 /* wrap bit */ -#define R_I 0x1000 /* interrupt on reception */ -#define R_L 0x0800 /* last BD in frame */ -#define R_F 0x0400 /* first BD in frame */ -#define R_M 0x0100 /* received because of promisc. mode */ - -#define R_LG 0x0020 /* frame too long */ -#define R_NO 0x0010 /* non-octet aligned */ -#define R_SH 0x0008 /* short frame */ -#define R_CR 0x0004 /* receive CRC error */ -#define R_OV 0x0002 /* receive overrun */ -#define R_CL 0x0001 /* collision */ -#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL) - - -/* - * ethernet interrupts - */ -#define ETHERNET_GRA 0x0080 /* graceful stop complete */ -#define ETHERNET_TXE 0x0010 /* transmit error */ -#define ETHERNET_RXF 0x0008 /* receive frame */ -#define ETHERNET_BSY 0x0004 /* busy condition */ -#define ETHERNET_TXB 0x0002 /* transmit buffer */ -#define ETHERNET_RXB 0x0001 /* receive buffer */ - -/* - * ethernet protocol specific mode register (PSMR) - */ -#define ETHER_HBC 0x8000 /* heartbeat checking */ -#define ETHER_FC 0x4000 /* force collision */ -#define ETHER_RSH 0x2000 /* receive short frames */ -#define ETHER_IAM 0x1000 /* individual address mode */ -#define ETHER_CRC_32 (0x2<<10) /* Enable CRC */ -#define ETHER_PRO 0x0200 /* promiscuous */ -#define ETHER_BRO 0x0100 /* broadcast address */ -#define ETHER_SBT 0x0080 /* stop backoff timer */ -#define ETHER_LPB 0x0040 /* Loop Back Mode */ -#define ETHER_SIP 0x0020 /* sample input pins */ -#define ETHER_LCW 0x0010 /* late collision window */ -#define ETHER_NIB_13 (0x0<<1) /* # of ignored bits 13 */ -#define ETHER_NIB_14 (0x1<<1) /* # of ignored bits 14 */ -#define ETHER_NIB_15 (0x2<<1) /* # of ignored bits 15 */ -#define ETHER_NIB_16 (0x3<<1) /* # of ignored bits 16 */ -#define ETHER_NIB_21 (0x4<<1) /* # of ignored bits 21 */ -#define ETHER_NIB_22 (0x5<<1) /* # of ignored bits 22 */ -#define ETHER_NIB_23 (0x6<<1) /* # of ignored bits 23 */ -#define ETHER_NIB_24 (0x7<<1) /* # of ignored bits 24 */ - -/* - * ethernet specific parameters - */ -#define CRC_WORD 4 /* Length in bytes of CRC */ -#define C_PRES 0xffffffff /* preform 32 bit CRC */ -#define C_MASK 0xdebb20e3 /* comply with 32 bit CRC */ -#define CRCEC 0x00000000 -#define ALEC 0x00000000 -#define DISFC 0x00000000 -#define PADS 0x00000000 -#define RET_LIM 0x000f /* retry 15 times to send a frame before interrupt */ -#define ETH_MFLR 0x05ee /* 1518 max frame size */ -#define MINFLR 0x0040 /* Minimum frame size 64 */ -#define MAXD1 0x05ee /* Max dma count 1518 */ -#define MAXD2 0x05ee -#define GADDR1 0x00000000 /* Clear group address */ -#define GADDR2 0x00000000 -#define GADDR3 0x00000000 -#define GADDR4 0x00000000 -#define P_PER 0x00000000 /*not used */ -#define IADDR1 0x00000000 /* Individual hash table not used */ -#define IADDR2 0x00000000 -#define IADDR3 0x00000000 -#define IADDR4 0x00000000 -#define TADDR_H 0x00000000 /* clear this regs */ -#define TADDR_M 0x00000000 -#define TADDR_L 0x00000000 - -/* SCC Parameter Ram */ -#define RFCR 0x18 /* normal operation */ -#define TFCR 0x18 /* normal operation */ -#define E_MRBLR 1518 /* Max ethernet frame length */ - -/* - * ethernet specific structure - */ -typedef union { - unsigned char b[6]; - struct { - unsigned short high; - unsigned short middl; - unsigned short low; - } w; -} ETHER_ADDR; - -typedef struct { - int max_frame_length; - int promisc_mode; - int reject_broadcast; - ETHER_ADDR phys_adr; -} ETHER_SPECIFIC; - -typedef struct { - ETHER_ADDR dst_addr; - ETHER_ADDR src_addr; - unsigned short type_or_len; - unsigned char data[1]; -} ETHER_FRAME; - -#define MAX_DATALEN 1500 -typedef struct { - ETHER_ADDR dst_addr; - ETHER_ADDR src_addr; - unsigned short type_or_len; - unsigned char data[MAX_DATALEN]; - unsigned char fcs[CRC_WORD]; -} ETHER_MAX_FRAME; - - -/* - * Internal ethernet function prototypes - */ -void ether_interrupt(int scc_num); -/* mleslie: debug */ -/* static void ethernet_rx_internal(int scc_num); */ -/* static void ethernet_tx_internal(int scc_num); */ - -/* - * User callable routines prototypes (ethernet specific) - */ -void ethernet_init(int scc_number, - alloc_routine *alloc_buffer, - free_routine *free_buffer, - store_rx_buffer_routine *store_rx_buffer, - handle_tx_error_routine *handle_tx_error, - handle_rx_error_routine *handle_rx_error, - handle_lost_error_routine *handle_lost_error, - ETHER_SPECIFIC *ether_spec); -int ethernet_tx(int scc_number, void *buf, int length); - -#endif - diff --git a/include/asm-m68knommu/m68360_pram.h b/include/asm-m68knommu/m68360_pram.h deleted file mode 100644 index e6088bbce93d..000000000000 --- a/include/asm-m68knommu/m68360_pram.h +++ /dev/null @@ -1,431 +0,0 @@ -/*********************************** - * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ - *********************************** - * - *************************************** - * Definitions of the parameter area RAM. - * Note that different structures are overlaid - * at the same offsets for the different modes - * of operation. - *************************************** - */ - -#ifndef __PRAM_H -#define __PRAM_H - -/* Time slot assignment table */ -#define VALID_SLOT 0x8000 -#define WRAP_SLOT 0x4000 - -/***************************************************************** - Global Multichannel parameter RAM -*****************************************************************/ -struct global_multi_pram { - /* - * Global Multichannel parameter RAM - */ - unsigned long mcbase; /* Multichannel Base pointer */ - unsigned short qmcstate; /* Multichannel Controller state */ - unsigned short mrblr; /* Maximum Receive Buffer Length */ - unsigned short tx_s_ptr; /* TSTATx Pointer */ - unsigned short rxptr; /* Current Time slot entry in TSATRx */ - unsigned short grfthr; /* Global Receive frame threshold */ - unsigned short grfcnt; /* Global Receive Frame Count */ - unsigned long intbase; /* Multichannel Base address */ - unsigned long iintptr; /* Pointer to interrupt queue */ - unsigned short rx_s_ptr; /* TSTARx Pointer */ - - unsigned short txptr; /* Current Time slot entry in TSATTx */ - unsigned long c_mask32; /* CRC Constant (debb20e3) */ - unsigned short tsatrx[32]; /* Time Slot Assignment Table Rx */ - unsigned short tsattx[32]; /* Time Slot Assignment Table Tx */ - unsigned short c_mask16; /* CRC Constant (f0b8) */ -}; - -/***************************************************************** - Quicc32 HDLC parameter RAM -*****************************************************************/ -struct quicc32_pram { - - unsigned short tbase; /* Tx Buffer Descriptors Base Address */ - unsigned short chamr; /* Channel Mode Register */ - unsigned long tstate; /* Tx Internal State */ - unsigned long txintr; /* Tx Internal Data Pointer */ - unsigned short tbptr; /* Tx Buffer Descriptor Pointer */ - unsigned short txcntr; /* Tx Internal Byte Count */ - unsigned long tupack; /* (Tx Temp) */ - unsigned long zistate; /* Zero Insertion machine state */ - unsigned long tcrc; /* Temp Transmit CRC */ - unsigned short intmask; /* Channel's interrupt mask flags */ - unsigned short bdflags; - unsigned short rbase; /* Rx Buffer Descriptors Base Address */ - unsigned short mflr; /* Max Frame Length Register */ - unsigned long rstate; /* Rx Internal State */ - unsigned long rxintr; /* Rx Internal Data Pointer */ - unsigned short rbptr; /* Rx Buffer Descriptor Pointer */ - unsigned short rxbyc; /* Rx Internal Byte Count */ - unsigned long rpack; /* (Rx Temp) */ - unsigned long zdstate; /* Zero Deletion machine state */ - unsigned long rcrc; /* Temp Transmit CRC */ - unsigned short maxc; /* Max_length counter */ - unsigned short tmp_mb; /* Temp */ -}; - - -/***************************************************************** - HDLC parameter RAM -*****************************************************************/ - -struct hdlc_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * HDLC specific parameter RAM - */ - unsigned char RESERVED1[4]; /* Reserved area */ - unsigned long c_mask; /* CRC constant */ - unsigned long c_pres; /* CRC preset */ - unsigned short disfc; /* discarded frame counter */ - unsigned short crcec; /* CRC error counter */ - unsigned short abtsc; /* abort sequence counter */ - unsigned short nmarc; /* nonmatching address rx cnt */ - unsigned short retrc; /* frame retransmission cnt */ - unsigned short mflr; /* maximum frame length reg */ - unsigned short max_cnt; /* maximum length counter */ - unsigned short rfthr; /* received frames threshold */ - unsigned short rfcnt; /* received frames count */ - unsigned short hmask; /* user defined frm addr mask */ - unsigned short haddr1; /* user defined frm address 1 */ - unsigned short haddr2; /* user defined frm address 2 */ - unsigned short haddr3; /* user defined frm address 3 */ - unsigned short haddr4; /* user defined frm address 4 */ - unsigned short tmp; /* temp */ - unsigned short tmp_mb; /* temp */ -}; - - - -/***************************************************************** - UART parameter RAM -*****************************************************************/ - -/* - * bits in uart control characters table - */ -#define CC_INVALID 0x8000 /* control character is valid */ -#define CC_REJ 0x4000 /* don't store char in buffer */ -#define CC_CHAR 0x00ff /* control character */ - -/* UART */ -struct uart_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rx_temp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * UART specific parameter RAM - */ - unsigned char RESERVED1[8]; /* Reserved area */ - unsigned short max_idl; /* maximum idle characters */ - unsigned short idlc; /* rx idle counter (internal) */ - unsigned short brkcr; /* break count register */ - - unsigned short parec; /* Rx parity error counter */ - unsigned short frmer; /* Rx framing error counter */ - unsigned short nosec; /* Rx noise counter */ - unsigned short brkec; /* Rx break character counter */ - unsigned short brkln; /* Reaceive break length */ - - unsigned short uaddr1; /* address character 1 */ - unsigned short uaddr2; /* address character 2 */ - unsigned short rtemp; /* temp storage */ - unsigned short toseq; /* Tx out of sequence char */ - unsigned short cc[8]; /* Rx control characters */ - unsigned short rccm; /* Rx control char mask */ - unsigned short rccr; /* Rx control char register */ - unsigned short rlbc; /* Receive last break char */ -}; - - - -/***************************************************************** - BISYNC parameter RAM -*****************************************************************/ - -struct bisync_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * BISYNC specific parameter RAM - */ - unsigned char RESERVED1[4]; /* Reserved area */ - unsigned long crcc; /* CRC Constant Temp Value */ - unsigned short prcrc; /* Preset Receiver CRC-16/LRC */ - unsigned short ptcrc; /* Preset Transmitter CRC-16/LRC */ - unsigned short parec; /* Receive Parity Error Counter */ - unsigned short bsync; /* BISYNC SYNC Character */ - unsigned short bdle; /* BISYNC DLE Character */ - unsigned short cc[8]; /* Rx control characters */ - unsigned short rccm; /* Receive Control Character Mask */ -}; - -/***************************************************************** - IOM2 parameter RAM - (overlaid on tx bd[5] of SCC channel[2]) -*****************************************************************/ -struct iom2_pram { - unsigned short ci_data; /* ci data */ - unsigned short monitor_data; /* monitor data */ - unsigned short tstate; /* transmitter state */ - unsigned short rstate; /* receiver state */ -}; - -/***************************************************************** - SPI/SMC parameter RAM - (overlaid on tx bd[6,7] of SCC channel[2]) -*****************************************************************/ - -#define SPI_R 0x8000 /* Ready bit in BD */ - -struct spi_pram { - unsigned short rbase; /* Rx BD Base Address */ - unsigned short tbase; /* Tx BD Base Address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ -}; - -struct smc_uart_pram { - unsigned short rbase; /* Rx BD Base Address */ - unsigned short tbase; /* Tx BD Base Address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned short max_idl; /* Maximum IDLE Characters */ - unsigned short idlc; /* Temporary IDLE Counter */ - unsigned short brkln; /* Last Rx Break Length */ - unsigned short brkec; /* Rx Break Condition Counter */ - unsigned short brkcr; /* Break Count Register (Tx) */ - unsigned short r_mask; /* Temporary bit mask */ -}; - -struct smc_trnsp_pram { - unsigned short rbase; /* rx BD Base Address */ - unsigned short tbase; /* Tx BD Base Address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned short reserved[5]; /* Reserved */ -}; - -struct idma_pram { - unsigned short ibase; /* IDMA BD Base Address */ - unsigned short ibptr; /* IDMA buffer descriptor pointer */ - unsigned long istate; /* IDMA internal state */ - unsigned long itemp; /* IDMA temp */ -}; - -struct ethernet_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * ETHERNET specific parameter RAM - */ - unsigned long c_pres; /* preset CRC */ - unsigned long c_mask; /* constant mask for CRC */ - unsigned long crcec; /* CRC error counter */ - unsigned long alec; /* alighnment error counter */ - unsigned long disfc; /* discard frame counter */ - unsigned short pads; /* short frame PAD characters */ - unsigned short ret_lim; /* retry limit threshold */ - unsigned short ret_cnt; /* retry limit counter */ - unsigned short mflr; /* maximum frame length reg */ - unsigned short minflr; /* minimum frame length reg */ - unsigned short maxd1; /* maximum DMA1 length reg */ - unsigned short maxd2; /* maximum DMA2 length reg */ - unsigned short maxd; /* rx max DMA */ - unsigned short dma_cnt; /* rx dma counter */ - unsigned short max_b; /* max bd byte count */ - unsigned short gaddr1; /* group address filter 1 */ - unsigned short gaddr2; /* group address filter 2 */ - unsigned short gaddr3; /* group address filter 3 */ - unsigned short gaddr4; /* group address filter 4 */ - unsigned long tbuf0_data0; /* save area 0 - current frm */ - unsigned long tbuf0_data1; /* save area 1 - current frm */ - unsigned long tbuf0_rba0; - unsigned long tbuf0_crc; - unsigned short tbuf0_bcnt; - union { - unsigned char b[6]; - struct { - unsigned short high; - unsigned short middl; - unsigned short low; - } w; - } paddr; - unsigned short p_per; /* persistence */ - unsigned short rfbd_ptr; /* rx first bd pointer */ - unsigned short tfbd_ptr; /* tx first bd pointer */ - unsigned short tlbd_ptr; /* tx last bd pointer */ - unsigned long tbuf1_data0; /* save area 0 - next frame */ - unsigned long tbuf1_data1; /* save area 1 - next frame */ - unsigned long tbuf1_rba0; - unsigned long tbuf1_crc; - unsigned short tbuf1_bcnt; - unsigned short tx_len; /* tx frame length counter */ - unsigned short iaddr1; /* individual address filter 1*/ - unsigned short iaddr2; /* individual address filter 2*/ - unsigned short iaddr3; /* individual address filter 3*/ - unsigned short iaddr4; /* individual address filter 4*/ - unsigned short boff_cnt; /* back-off counter */ - unsigned short taddr_h; /* temp address (MSB) */ - unsigned short taddr_m; /* temp address */ - unsigned short taddr_l; /* temp address (LSB) */ -}; - -struct transparent_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * TRANSPARENT specific parameter RAM - */ - unsigned long crc_p; /* CRC Preset */ - unsigned long crc_c; /* CRC constant */ -}; - -struct timer_pram { - /* - * RISC timers parameter RAM - */ - unsigned short tm_base; /* RISC timer table base adr */ - unsigned short tm_ptr; /* RISC timer table pointer */ - unsigned short r_tmr; /* RISC timer mode register */ - unsigned short r_tmv; /* RISC timer valid register */ - unsigned long tm_cmd; /* RISC timer cmd register */ - unsigned long tm_cnt; /* RISC timer internal cnt */ -}; - -#endif diff --git a/include/asm-m68knommu/m68360_quicc.h b/include/asm-m68knommu/m68360_quicc.h deleted file mode 100644 index 6d40f4d18e10..000000000000 --- a/include/asm-m68knommu/m68360_quicc.h +++ /dev/null @@ -1,362 +0,0 @@ -/*********************************** - * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ - *********************************** - * - *************************************** - * Definitions of QUICC memory structures - *************************************** - */ - -#ifndef __M68360_QUICC_H -#define __M68360_QUICC_H - -/* - * include registers and - * parameter ram definitions files - */ -#include -#include - - - -/* Buffer Descriptors */ -typedef struct quicc_bd { - volatile unsigned short status; - volatile unsigned short length; - volatile unsigned char *buf; /* WARNING: This is only true if *char is 32 bits */ -} QUICC_BD; - - -#ifdef MOTOROLA_ORIGINAL -struct user_data { - /* BASE + 0x000: user data memory */ - volatile unsigned char udata_bd_ucode[0x400]; /*user data bd's Ucode*/ - volatile unsigned char udata_bd[0x200]; /*user data Ucode */ - volatile unsigned char ucode_ext[0x100]; /*Ucode Extention ram */ - volatile unsigned char RESERVED1[0x500]; /* Reserved area */ -}; -#else -struct user_data { - /* BASE + 0x000: user data memory */ - volatile unsigned char udata_bd_ucode[0x400]; /* user data, bds, Ucode*/ - volatile unsigned char udata_bd1[0x200]; /* user, bds */ - volatile unsigned char ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */ - volatile unsigned char udata_bd2[0x100]; /* user, bds */ - volatile unsigned char RESERVED1[0x400]; /* Reserved area */ -}; -#endif - - -/* - * internal ram - */ -typedef struct quicc { - union { - struct quicc32_pram ch_pram_tbl[32]; /* 32*64(bytes) per channel */ - struct user_data u; - }ch_or_u; /* multipul or user space */ - - /* BASE + 0xc00: PARAMETER RAM */ - union { - struct scc_pram { - union { - struct hdlc_pram h; - struct uart_pram u; - struct bisync_pram b; - struct transparent_pram t; - unsigned char RESERVED66[0x70]; - } pscc; /* scc parameter area (protocol dependent) */ - union { - struct { - unsigned char RESERVED70[0x10]; - struct spi_pram spi; - unsigned char RESERVED72[0x8]; - struct timer_pram timer; - } timer_spi; - struct { - struct idma_pram idma; - unsigned char RESERVED67[0x4]; - union { - struct smc_uart_pram u; - struct smc_trnsp_pram t; - } psmc; - } idma_smc; - } pothers; - } scc; - struct ethernet_pram enet_scc; - struct global_multi_pram m; - unsigned char pr[0x100]; - } pram[4]; - - /* reserved */ - - /* BASE + 0x1000: INTERNAL REGISTERS */ - /* SIM */ - volatile unsigned long sim_mcr; /* module configuration reg */ - volatile unsigned short sim_simtr; /* module test register */ - volatile unsigned char RESERVED2[0x2]; /* Reserved area */ - volatile unsigned char sim_avr; /* auto vector reg */ - volatile unsigned char sim_rsr; /* reset status reg */ - volatile unsigned char RESERVED3[0x2]; /* Reserved area */ - volatile unsigned char sim_clkocr; /* CLCO control register */ - volatile unsigned char RESERVED62[0x3]; /* Reserved area */ - volatile unsigned short sim_pllcr; /* PLL control register */ - volatile unsigned char RESERVED63[0x2]; /* Reserved area */ - volatile unsigned short sim_cdvcr; /* Clock devider control register */ - volatile unsigned short sim_pepar; /* Port E pin assignment register */ - volatile unsigned char RESERVED64[0xa]; /* Reserved area */ - volatile unsigned char sim_sypcr; /* system protection control*/ - volatile unsigned char sim_swiv; /* software interrupt vector*/ - volatile unsigned char RESERVED6[0x2]; /* Reserved area */ - volatile unsigned short sim_picr; /* periodic interrupt control reg */ - volatile unsigned char RESERVED7[0x2]; /* Reserved area */ - volatile unsigned short sim_pitr; /* periodic interrupt timing reg */ - volatile unsigned char RESERVED8[0x3]; /* Reserved area */ - volatile unsigned char sim_swsr; /* software service */ - volatile unsigned long sim_bkar; /* breakpoint address register*/ - volatile unsigned long sim_bkcr; /* breakpoint control register*/ - volatile unsigned char RESERVED10[0x8]; /* Reserved area */ - /* MEMC */ - volatile unsigned long memc_gmr; /* Global memory register */ - volatile unsigned short memc_mstat; /* MEMC status register */ - volatile unsigned char RESERVED11[0xa]; /* Reserved area */ - volatile unsigned long memc_br0; /* base register 0 */ - volatile unsigned long memc_or0; /* option register 0 */ - volatile unsigned char RESERVED12[0x8]; /* Reserved area */ - volatile unsigned long memc_br1; /* base register 1 */ - volatile unsigned long memc_or1; /* option register 1 */ - volatile unsigned char RESERVED13[0x8]; /* Reserved area */ - volatile unsigned long memc_br2; /* base register 2 */ - volatile unsigned long memc_or2; /* option register 2 */ - volatile unsigned char RESERVED14[0x8]; /* Reserved area */ - volatile unsigned long memc_br3; /* base register 3 */ - volatile unsigned long memc_or3; /* option register 3 */ - volatile unsigned char RESERVED15[0x8]; /* Reserved area */ - volatile unsigned long memc_br4; /* base register 3 */ - volatile unsigned long memc_or4; /* option register 3 */ - volatile unsigned char RESERVED16[0x8]; /* Reserved area */ - volatile unsigned long memc_br5; /* base register 3 */ - volatile unsigned long memc_or5; /* option register 3 */ - volatile unsigned char RESERVED17[0x8]; /* Reserved area */ - volatile unsigned long memc_br6; /* base register 3 */ - volatile unsigned long memc_or6; /* option register 3 */ - volatile unsigned char RESERVED18[0x8]; /* Reserved area */ - volatile unsigned long memc_br7; /* base register 3 */ - volatile unsigned long memc_or7; /* option register 3 */ - volatile unsigned char RESERVED9[0x28]; /* Reserved area */ - /* TEST */ - volatile unsigned short test_tstmra; /* master shift a */ - volatile unsigned short test_tstmrb; /* master shift b */ - volatile unsigned short test_tstsc; /* shift count */ - volatile unsigned short test_tstrc; /* repetition counter */ - volatile unsigned short test_creg; /* control */ - volatile unsigned short test_dreg; /* destributed register */ - volatile unsigned char RESERVED58[0x404]; /* Reserved area */ - /* IDMA1 */ - volatile unsigned short idma_iccr; /* channel configuration reg*/ - volatile unsigned char RESERVED19[0x2]; /* Reserved area */ - volatile unsigned short idma1_cmr; /* dma mode reg */ - volatile unsigned char RESERVED68[0x2]; /* Reserved area */ - volatile unsigned long idma1_sapr; /* dma source addr ptr */ - volatile unsigned long idma1_dapr; /* dma destination addr ptr */ - volatile unsigned long idma1_bcr; /* dma byte count reg */ - volatile unsigned char idma1_fcr; /* function code reg */ - volatile unsigned char RESERVED20; /* Reserved area */ - volatile unsigned char idma1_cmar; /* channel mask reg */ - volatile unsigned char RESERVED21; /* Reserved area */ - volatile unsigned char idma1_csr; /* channel status reg */ - volatile unsigned char RESERVED22[0x3]; /* Reserved area */ - /* SDMA */ - volatile unsigned char sdma_sdsr; /* status reg */ - volatile unsigned char RESERVED23; /* Reserved area */ - volatile unsigned short sdma_sdcr; /* configuration reg */ - volatile unsigned long sdma_sdar; /* address reg */ - /* IDMA2 */ - volatile unsigned char RESERVED69[0x2]; /* Reserved area */ - volatile unsigned short idma2_cmr; /* dma mode reg */ - volatile unsigned long idma2_sapr; /* dma source addr ptr */ - volatile unsigned long idma2_dapr; /* dma destination addr ptr */ - volatile unsigned long idma2_bcr; /* dma byte count reg */ - volatile unsigned char idma2_fcr; /* function code reg */ - volatile unsigned char RESERVED24; /* Reserved area */ - volatile unsigned char idma2_cmar; /* channel mask reg */ - volatile unsigned char RESERVED25; /* Reserved area */ - volatile unsigned char idma2_csr; /* channel status reg */ - volatile unsigned char RESERVED26[0x7]; /* Reserved area */ - /* Interrupt Controller */ - volatile unsigned long intr_cicr; /* CP interrupt configuration reg*/ - volatile unsigned long intr_cipr; /* CP interrupt pending reg */ - volatile unsigned long intr_cimr; /* CP interrupt mask reg */ - volatile unsigned long intr_cisr; /* CP interrupt in service reg*/ - /* Parallel I/O */ - volatile unsigned short pio_padir; /* port A data direction reg */ - volatile unsigned short pio_papar; /* port A pin assignment reg */ - volatile unsigned short pio_paodr; /* port A open drain reg */ - volatile unsigned short pio_padat; /* port A data register */ - volatile unsigned char RESERVED28[0x8]; /* Reserved area */ - volatile unsigned short pio_pcdir; /* port C data direction reg*/ - volatile unsigned short pio_pcpar; /* port C pin assignment reg*/ - volatile unsigned short pio_pcso; /* port C special options */ - volatile unsigned short pio_pcdat; /* port C data register */ - volatile unsigned short pio_pcint; /* port C interrupt cntrl reg */ - volatile unsigned char RESERVED29[0x16]; /* Reserved area */ - /* Timer */ - volatile unsigned short timer_tgcr; /* timer global configuration reg */ - volatile unsigned char RESERVED30[0xe]; /* Reserved area */ - volatile unsigned short timer_tmr1; /* timer 1 mode reg */ - volatile unsigned short timer_tmr2; /* timer 2 mode reg */ - volatile unsigned short timer_trr1; /* timer 1 referance reg */ - volatile unsigned short timer_trr2; /* timer 2 referance reg */ - volatile unsigned short timer_tcr1; /* timer 1 capture reg */ - volatile unsigned short timer_tcr2; /* timer 2 capture reg */ - volatile unsigned short timer_tcn1; /* timer 1 counter reg */ - volatile unsigned short timer_tcn2; /* timer 2 counter reg */ - volatile unsigned short timer_tmr3; /* timer 3 mode reg */ - volatile unsigned short timer_tmr4; /* timer 4 mode reg */ - volatile unsigned short timer_trr3; /* timer 3 referance reg */ - volatile unsigned short timer_trr4; /* timer 4 referance reg */ - volatile unsigned short timer_tcr3; /* timer 3 capture reg */ - volatile unsigned short timer_tcr4; /* timer 4 capture reg */ - volatile unsigned short timer_tcn3; /* timer 3 counter reg */ - volatile unsigned short timer_tcn4; /* timer 4 counter reg */ - volatile unsigned short timer_ter1; /* timer 1 event reg */ - volatile unsigned short timer_ter2; /* timer 2 event reg */ - volatile unsigned short timer_ter3; /* timer 3 event reg */ - volatile unsigned short timer_ter4; /* timer 4 event reg */ - volatile unsigned char RESERVED34[0x8]; /* Reserved area */ - /* CP */ - volatile unsigned short cp_cr; /* command register */ - volatile unsigned char RESERVED35[0x2]; /* Reserved area */ - volatile unsigned short cp_rccr; /* main configuration reg */ - volatile unsigned char RESERVED37; /* Reserved area */ - volatile unsigned char cp_rmds; /* development support status reg */ - volatile unsigned long cp_rmdr; /* development support control reg */ - volatile unsigned short cp_rctr1; /* ram break register 1 */ - volatile unsigned short cp_rctr2; /* ram break register 2 */ - volatile unsigned short cp_rctr3; /* ram break register 3 */ - volatile unsigned short cp_rctr4; /* ram break register 4 */ - volatile unsigned char RESERVED59[0x2]; /* Reserved area */ - volatile unsigned short cp_rter; /* RISC timers event reg */ - volatile unsigned char RESERVED38[0x2]; /* Reserved area */ - volatile unsigned short cp_rtmr; /* RISC timers mask reg */ - volatile unsigned char RESERVED39[0x14]; /* Reserved area */ - /* BRG */ - union { - volatile unsigned long l; - struct { - volatile unsigned short BRGC_RESERV:14; - volatile unsigned short rst:1; - volatile unsigned short en:1; - volatile unsigned short extc:2; - volatile unsigned short atb:1; - volatile unsigned short cd:12; - volatile unsigned short div16:1; - } b; - } brgc[4]; /* BRG1-BRG4 configuration regs*/ - /* SCC registers */ - struct scc_regs { - union { - struct { - /* Low word. */ - volatile unsigned short GSMR_RESERV2:1; - volatile unsigned short edge:2; - volatile unsigned short tci:1; - volatile unsigned short tsnc:2; - volatile unsigned short rinv:1; - volatile unsigned short tinv:1; - volatile unsigned short tpl:3; - volatile unsigned short tpp:2; - volatile unsigned short tend:1; - volatile unsigned short tdcr:2; - volatile unsigned short rdcr:2; - volatile unsigned short renc:3; - volatile unsigned short tenc:3; - volatile unsigned short diag:2; - volatile unsigned short enr:1; - volatile unsigned short ent:1; - volatile unsigned short mode:4; - /* High word. */ - volatile unsigned short GSMR_RESERV1:14; - volatile unsigned short pri:1; - volatile unsigned short gde:1; - volatile unsigned short tcrc:2; - volatile unsigned short revd:1; - volatile unsigned short trx:1; - volatile unsigned short ttx:1; - volatile unsigned short cdp:1; - volatile unsigned short ctsp:1; - volatile unsigned short cds:1; - volatile unsigned short ctss:1; - volatile unsigned short tfl:1; - volatile unsigned short rfw:1; - volatile unsigned short txsy:1; - volatile unsigned short synl:2; - volatile unsigned short rtsm:1; - volatile unsigned short rsyn:1; - } b; - struct { - volatile unsigned long low; - volatile unsigned long high; - } w; - } scc_gsmr; /* SCC general mode reg */ - volatile unsigned short scc_psmr; /* protocol specific mode reg */ - volatile unsigned char RESERVED42[0x2]; /* Reserved area */ - volatile unsigned short scc_todr; /* SCC transmit on demand */ - volatile unsigned short scc_dsr; /* SCC data sync reg */ - volatile unsigned short scc_scce; /* SCC event reg */ - volatile unsigned char RESERVED43[0x2];/* Reserved area */ - volatile unsigned short scc_sccm; /* SCC mask reg */ - volatile unsigned char RESERVED44[0x1];/* Reserved area */ - volatile unsigned char scc_sccs; /* SCC status reg */ - volatile unsigned char RESERVED45[0x8]; /* Reserved area */ - } scc_regs[4]; - /* SMC */ - struct smc_regs { - volatile unsigned char RESERVED46[0x2]; /* Reserved area */ - volatile unsigned short smc_smcmr; /* SMC mode reg */ - volatile unsigned char RESERVED60[0x2]; /* Reserved area */ - volatile unsigned char smc_smce; /* SMC event reg */ - volatile unsigned char RESERVED47[0x3]; /* Reserved area */ - volatile unsigned char smc_smcm; /* SMC mask reg */ - volatile unsigned char RESERVED48[0x5]; /* Reserved area */ - } smc_regs[2]; - /* SPI */ - volatile unsigned short spi_spmode; /* SPI mode reg */ - volatile unsigned char RESERVED51[0x4]; /* Reserved area */ - volatile unsigned char spi_spie; /* SPI event reg */ - volatile unsigned char RESERVED52[0x3]; /* Reserved area */ - volatile unsigned char spi_spim; /* SPI mask reg */ - volatile unsigned char RESERVED53[0x2]; /* Reserved area */ - volatile unsigned char spi_spcom; /* SPI command reg */ - volatile unsigned char RESERVED54[0x4]; /* Reserved area */ - /* PIP */ - volatile unsigned short pip_pipc; /* pip configuration reg */ - volatile unsigned char RESERVED65[0x2]; /* Reserved area */ - volatile unsigned short pip_ptpr; /* pip timing parameters reg */ - volatile unsigned long pip_pbdir; /* port b data direction reg */ - volatile unsigned long pip_pbpar; /* port b pin assignment reg */ - volatile unsigned long pip_pbodr; /* port b open drain reg */ - volatile unsigned long pip_pbdat; /* port b data reg */ - volatile unsigned char RESERVED71[0x18]; /* Reserved area */ - /* Serial Interface */ - volatile unsigned long si_simode; /* SI mode register */ - volatile unsigned char si_sigmr; /* SI global mode register */ - volatile unsigned char RESERVED55; /* Reserved area */ - volatile unsigned char si_sistr; /* SI status register */ - volatile unsigned char si_sicmr; /* SI command register */ - volatile unsigned char RESERVED56[0x4]; /* Reserved area */ - volatile unsigned long si_sicr; /* SI clock routing */ - volatile unsigned long si_sirp; /* SI ram pointers */ - volatile unsigned char RESERVED57[0xc]; /* Reserved area */ - volatile unsigned short si_siram[0x80]; /* SI routing ram */ -} QUICC; - -#endif - -/* - * Local variables: - * c-indent-level: 4 - * c-basic-offset: 4 - * tab-width: 4 - * End: - */ diff --git a/include/asm-m68knommu/m68360_regs.h b/include/asm-m68knommu/m68360_regs.h deleted file mode 100644 index d57217ca4f27..000000000000 --- a/include/asm-m68knommu/m68360_regs.h +++ /dev/null @@ -1,408 +0,0 @@ -/*********************************** - * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $ - *********************************** - * - *************************************** - * Definitions of the QUICC registers - *************************************** - */ - -#ifndef __REGISTERS_H -#define __REGISTERS_H - -#define CLEAR_BIT(x, bit) x =bit - -/***************************************************************** - Command Register -*****************************************************************/ - -/* bit fields within command register */ -#define SOFTWARE_RESET 0x8000 -#define CMD_OPCODE 0x0f00 -#define CMD_CHANNEL 0x00f0 -#define CMD_FLAG 0x0001 - -/* general command opcodes */ -#define INIT_RXTX_PARAMS 0x0000 -#define INIT_RX_PARAMS 0x0100 -#define INIT_TX_PARAMS 0x0200 -#define ENTER_HUNT_MODE 0x0300 -#define STOP_TX 0x0400 -#define GR_STOP_TX 0x0500 -#define RESTART_TX 0x0600 -#define CLOSE_RX_BD 0x0700 -#define SET_ENET_GROUP 0x0800 -#define RESET_ENET_GROUP 0x0900 - -/* quicc32 CP commands */ -#define STOP_TX_32 0x0e00 /*add chan# bits 2-6 */ -#define ENTER_HUNT_MODE_32 0x1e00 - -/* quicc32 mask/event SCC register */ -#define GOV 0x01 -#define GUN 0x02 -#define GINT 0x04 -#define IQOV 0x08 - - -/* Timer commands */ -#define SET_TIMER 0x0800 - -/* Multi channel Interrupt structure */ -#define INTR_VALID 0x8000 /* Valid interrupt entry */ -#define INTR_WRAP 0x4000 /* Wrap bit in the interrupt entry table */ -#define INTR_CH_NU 0x07c0 /* Channel Num in interrupt table */ -#define INTR_MASK_BITS 0x383f - -/* - * General SCC mode register (GSMR) - */ - -#define MODE_HDLC 0x0 -#define MODE_APPLE_TALK 0x2 -#define MODE_SS7 0x3 -#define MODE_UART 0x4 -#define MODE_PROFIBUS 0x5 -#define MODE_ASYNC_HDLC 0x6 -#define MODE_V14 0x7 -#define MODE_BISYNC 0x8 -#define MODE_DDCMP 0x9 -#define MODE_MULTI_CHANNEL 0xa -#define MODE_ETHERNET 0xc - -#define DIAG_NORMAL 0x0 -#define DIAG_LOCAL_LPB 0x1 -#define DIAG_AUTO_ECHO 0x2 -#define DIAG_LBP_ECHO 0x3 - -/* For RENC and TENC fields in GSMR */ -#define ENC_NRZ 0x0 -#define ENC_NRZI 0x1 -#define ENC_FM0 0x2 -#define ENC_MANCH 0x4 -#define ENC_DIFF_MANC 0x6 - -/* For TDCR and RDCR fields in GSMR */ -#define CLOCK_RATE_1 0x0 -#define CLOCK_RATE_8 0x1 -#define CLOCK_RATE_16 0x2 -#define CLOCK_RATE_32 0x3 - -#define TPP_00 0x0 -#define TPP_10 0x1 -#define TPP_01 0x2 -#define TPP_11 0x3 - -#define TPL_NO 0x0 -#define TPL_8 0x1 -#define TPL_16 0x2 -#define TPL_32 0x3 -#define TPL_48 0x4 -#define TPL_64 0x5 -#define TPL_128 0x6 - -#define TSNC_INFINITE 0x0 -#define TSNC_14_65 0x1 -#define TSNC_4_15 0x2 -#define TSNC_3_1 0x3 - -#define EDGE_BOTH 0x0 -#define EDGE_POS 0x1 -#define EDGE_NEG 0x2 -#define EDGE_NO 0x3 - -#define SYNL_NO 0x0 -#define SYNL_4 0x1 -#define SYNL_8 0x2 -#define SYNL_16 0x3 - -#define TCRC_CCITT16 0x0 -#define TCRC_CRC16 0x1 -#define TCRC_CCITT32 0x2 - - -/***************************************************************** - TODR (Transmit on demand) Register -*****************************************************************/ -#define TODR_TOD 0x8000 /* Transmit on demand */ - - -/***************************************************************** - CICR register settings -*****************************************************************/ - -/* note that relative irq priorities of the SCCs can be reordered - * if desired - see p. 7-377 of the MC68360UM */ -#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ -#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ -#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ -#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ - -#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ -#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ -#define CICR_VBA_MASK ((uint)0x000000e0) /* Vector Base Address */ -#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ - - -/***************************************************************** - Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379) -*****************************************************************/ - -#define INTR_PIO_PC0 0x80000000 /* parallel I/O C bit 0 */ -#define INTR_SCC1 0x40000000 /* SCC port 1 */ -#define INTR_SCC2 0x20000000 /* SCC port 2 */ -#define INTR_SCC3 0x10000000 /* SCC port 3 */ -#define INTR_SCC4 0x08000000 /* SCC port 4 */ -#define INTR_PIO_PC1 0x04000000 /* parallel i/o C bit 1 */ -#define INTR_TIMER1 0x02000000 /* timer 1 */ -#define INTR_PIO_PC2 0x01000000 /* parallel i/o C bit 2 */ -#define INTR_PIO_PC3 0x00800000 /* parallel i/o C bit 3 */ -#define INTR_SDMA_BERR 0x00400000 /* SDMA channel bus error */ -#define INTR_DMA1 0x00200000 /* idma 1 */ -#define INTR_DMA2 0x00100000 /* idma 2 */ -#define INTR_TIMER2 0x00040000 /* timer 2 */ -#define INTR_CP_TIMER 0x00020000 /* CP timer */ -#define INTR_PIP_STATUS 0x00010000 /* PIP status */ -#define INTR_PIO_PC4 0x00008000 /* parallel i/o C bit 4 */ -#define INTR_PIO_PC5 0x00004000 /* parallel i/o C bit 5 */ -#define INTR_TIMER3 0x00001000 /* timer 3 */ -#define INTR_PIO_PC6 0x00000800 /* parallel i/o C bit 6 */ -#define INTR_PIO_PC7 0x00000400 /* parallel i/o C bit 7 */ -#define INTR_PIO_PC8 0x00000200 /* parallel i/o C bit 8 */ -#define INTR_TIMER4 0x00000080 /* timer 4 */ -#define INTR_PIO_PC9 0x00000040 /* parallel i/o C bit 9 */ -#define INTR_SCP 0x00000020 /* SCP */ -#define INTR_SMC1 0x00000010 /* SMC 1 */ -#define INTR_SMC2 0x00000008 /* SMC 2 */ -#define INTR_PIO_PC10 0x00000004 /* parallel i/o C bit 10 */ -#define INTR_PIO_PC11 0x00000002 /* parallel i/o C bit 11 */ -#define INTR_ERR 0x00000001 /* error */ - - -/***************************************************************** - CPM Interrupt vector encodings (MC68360UM p. 7-376) -*****************************************************************/ - -#define CPMVEC_NR 32 -#define CPMVEC_PIO_PC0 0x1f -#define CPMVEC_SCC1 0x1e -#define CPMVEC_SCC2 0x1d -#define CPMVEC_SCC3 0x1c -#define CPMVEC_SCC4 0x1b -#define CPMVEC_PIO_PC1 0x1a -#define CPMVEC_TIMER1 0x19 -#define CPMVEC_PIO_PC2 0x18 -#define CPMVEC_PIO_PC3 0x17 -#define CPMVEC_SDMA_CB_ERR 0x16 -#define CPMVEC_IDMA1 0x15 -#define CPMVEC_IDMA2 0x14 -#define CPMVEC_RESERVED3 0x13 -#define CPMVEC_TIMER2 0x12 -#define CPMVEC_RISCTIMER 0x11 -#define CPMVEC_RESERVED2 0x10 -#define CPMVEC_PIO_PC4 0x0f -#define CPMVEC_PIO_PC5 0x0e -#define CPMVEC_TIMER3 0x0c -#define CPMVEC_PIO_PC6 0x0b -#define CPMVEC_PIO_PC7 0x0a -#define CPMVEC_PIO_PC8 0x09 -#define CPMVEC_RESERVED1 0x08 -#define CPMVEC_TIMER4 0x07 -#define CPMVEC_PIO_PC9 0x06 -#define CPMVEC_SPI 0x05 -#define CPMVEC_SMC1 0x04 -#define CPMVEC_SMC2 0x03 -#define CPMVEC_PIO_PC10 0x02 -#define CPMVEC_PIO_PC11 0x01 -#define CPMVEC_ERROR 0x00 - -/* #define CPMVEC_PIO_PC0 ((ushort)0x1f) */ -/* #define CPMVEC_SCC1 ((ushort)0x1e) */ -/* #define CPMVEC_SCC2 ((ushort)0x1d) */ -/* #define CPMVEC_SCC3 ((ushort)0x1c) */ -/* #define CPMVEC_SCC4 ((ushort)0x1b) */ -/* #define CPMVEC_PIO_PC1 ((ushort)0x1a) */ -/* #define CPMVEC_TIMER1 ((ushort)0x19) */ -/* #define CPMVEC_PIO_PC2 ((ushort)0x18) */ -/* #define CPMVEC_PIO_PC3 ((ushort)0x17) */ -/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */ -/* #define CPMVEC_IDMA1 ((ushort)0x15) */ -/* #define CPMVEC_IDMA2 ((ushort)0x14) */ -/* #define CPMVEC_RESERVED3 ((ushort)0x13) */ -/* #define CPMVEC_TIMER2 ((ushort)0x12) */ -/* #define CPMVEC_RISCTIMER ((ushort)0x11) */ -/* #define CPMVEC_RESERVED2 ((ushort)0x10) */ -/* #define CPMVEC_PIO_PC4 ((ushort)0x0f) */ -/* #define CPMVEC_PIO_PC5 ((ushort)0x0e) */ -/* #define CPMVEC_TIMER3 ((ushort)0x0c) */ -/* #define CPMVEC_PIO_PC6 ((ushort)0x0b) */ -/* #define CPMVEC_PIO_PC7 ((ushort)0x0a) */ -/* #define CPMVEC_PIO_PC8 ((ushort)0x09) */ -/* #define CPMVEC_RESERVED1 ((ushort)0x08) */ -/* #define CPMVEC_TIMER4 ((ushort)0x07) */ -/* #define CPMVEC_PIO_PC9 ((ushort)0x06) */ -/* #define CPMVEC_SPI ((ushort)0x05) */ -/* #define CPMVEC_SMC1 ((ushort)0x04) */ -/* #define CPMVEC_SMC2 ((ushort)0x03) */ -/* #define CPMVEC_PIO_PC10 ((ushort)0x02) */ -/* #define CPMVEC_PIO_PC11 ((ushort)0x01) */ -/* #define CPMVEC_ERROR ((ushort)0x00) */ - - -/***************************************************************** - * PIO control registers - *****************************************************************/ - -/* Port A - See 360UM p. 7-358 - * - * Note that most of these pins have alternate functions - */ - - -/* The macros are nice, but there are all sorts of references to 1-indexed - * facilities on the 68360... */ -/* #define PA_RXD(n) ((ushort)(0x01<<(2*n))) */ -/* #define PA_TXD(n) ((ushort)(0x02<<(2*n))) */ - -#define PA_RXD1 ((ushort)0x0001) -#define PA_TXD1 ((ushort)0x0002) -#define PA_RXD2 ((ushort)0x0004) -#define PA_TXD2 ((ushort)0x0008) -#define PA_RXD3 ((ushort)0x0010) -#define PA_TXD3 ((ushort)0x0020) -#define PA_RXD4 ((ushort)0x0040) -#define PA_TXD4 ((ushort)0x0080) - -#define PA_CLK1 ((ushort)0x0100) -#define PA_CLK2 ((ushort)0x0200) -#define PA_CLK3 ((ushort)0x0400) -#define PA_CLK4 ((ushort)0x0800) -#define PA_CLK5 ((ushort)0x1000) -#define PA_CLK6 ((ushort)0x2000) -#define PA_CLK7 ((ushort)0x4000) -#define PA_CLK8 ((ushort)0x8000) - - -/* Port B - See 360UM p. 7-362 - */ - - -/* Port C - See 360UM p. 7-365 - */ - -#define PC_RTS1 ((ushort)0x0001) -#define PC_RTS2 ((ushort)0x0002) -#define PC__RTS3 ((ushort)0x0004) /* !RTS3 */ -#define PC__RTS4 ((ushort)0x0008) /* !RTS4 */ - -#define PC_CTS1 ((ushort)0x0010) -#define PC_CD1 ((ushort)0x0020) -#define PC_CTS2 ((ushort)0x0040) -#define PC_CD2 ((ushort)0x0080) -#define PC_CTS3 ((ushort)0x0100) -#define PC_CD3 ((ushort)0x0200) -#define PC_CTS4 ((ushort)0x0400) -#define PC_CD4 ((ushort)0x0800) - - - -/***************************************************************** - chip select option register -*****************************************************************/ -#define DTACK 0xe000 -#define ADR_MASK 0x1ffc -#define RDWR_MASK 0x0002 -#define FC_MASK 0x0001 - -/***************************************************************** - tbase and rbase registers -*****************************************************************/ -#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase)) -#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase)) -#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr)) -#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr)) -#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \ - ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode))) -#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \ - ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode))) -#define INCREASE_TBD(bd,quicc,pram) { \ - if((bd)->status & T_W) \ - (bd) = TBD_ADDR(quicc,pram); \ - else \ - (bd)++; \ -} -#define DECREASE_TBD(bd,quicc,pram) { \ - if ((bd) == TBD_ADDR(quicc, pram)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} -#define INCREASE_RBD(bd,quicc,pram) { \ - if((bd)->status & R_W) \ - (bd) = RBD_ADDR(quicc,pram); \ - else \ - (bd)++; \ -} -#define DECREASE_RBD(bd,quicc,pram) { \ - if ((bd) == RBD_ADDR(quicc, pram)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} - -/***************************************************************** - Macros for Multi channel -*****************************************************************/ -#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page]) -#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase) -#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \ - (&(quicc->ch_or_u.ch_pram_tbl[channel]))) -#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase))) -#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase))) -#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr))) -#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr))) -#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \ - CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \ - ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page)))) -#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \ - CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \ - ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page)))) - -#define INCREASE_TBD_32(bd,quicc,page,channel) { \ - if((bd)->status & T_W) \ - (bd) = TBD_32_ADDR(quicc,page,channel); \ - else \ - (bd)++; \ -} -#define DECREASE_TBD_32(bd,quicc,page,channel) { \ - if ((bd) == TBD_32_ADDR(quicc, page,channel)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} -#define INCREASE_RBD_32(bd,quicc,page,channel) { \ - if((bd)->status & R_W) \ - (bd) = RBD_32_ADDR(quicc,page,channel); \ - else \ - (bd)++; \ -} -#define DECREASE_RBD_32(bd,quicc,page,channel) { \ - if ((bd) == RBD_32_ADDR(quicc, page,channel)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} - -#endif diff --git a/include/asm-m68knommu/machdep.h b/include/asm-m68knommu/machdep.h deleted file mode 100644 index de9f47a51cc2..000000000000 --- a/include/asm-m68knommu/machdep.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _M68KNOMMU_MACHDEP_H -#define _M68KNOMMU_MACHDEP_H - -#include - -/* Hardware clock functions */ -extern void hw_timer_init(void); -extern unsigned long hw_timer_offset(void); - -extern irqreturn_t arch_timer_interrupt(int irq, void *dummy); - -/* Machine dependent time handling */ -extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour, - int *min, int *sec); -extern int (*mach_set_clock_mmss)(unsigned long); - -/* machine dependent power off functions */ -extern void (*mach_reset)( void ); -extern void (*mach_halt)( void ); -extern void (*mach_power_off)( void ); - -extern void config_BSP(char *command, int len); - -extern void do_IRQ(int irq, struct pt_regs *fp); - -#endif /* _M68KNOMMU_MACHDEP_H */ diff --git a/include/asm-m68knommu/math-emu.h b/include/asm-m68knommu/math-emu.h deleted file mode 100644 index 7e7090517b72..000000000000 --- a/include/asm-m68knommu/math-emu.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/mc146818rtc.h b/include/asm-m68knommu/mc146818rtc.h deleted file mode 100644 index 907a0481a140..000000000000 --- a/include/asm-m68knommu/mc146818rtc.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Machine dependent access functions for RTC registers. - */ -#ifndef _M68KNOMMU_MC146818RTC_H -#define _M68KNOMMU_MC146818RTC_H - -/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */ - -#endif /* _M68KNOMMU_MC146818RTC_H */ diff --git a/include/asm-m68knommu/mcfcache.h b/include/asm-m68knommu/mcfcache.h deleted file mode 100644 index c042634fadaa..000000000000 --- a/include/asm-m68knommu/mcfcache.h +++ /dev/null @@ -1,150 +0,0 @@ -/****************************************************************************/ - -/* - * mcfcache.h -- ColdFire CPU cache support code - * - * (C) Copyright 2004, Greg Ungerer - */ - -/****************************************************************************/ -#ifndef __M68KNOMMU_MCFCACHE_H -#define __M68KNOMMU_MCFCACHE_H -/****************************************************************************/ - - -/* - * The different ColdFire families have different cache arrangments. - * Everything from a small instruction only cache, to configurable - * data and/or instruction cache, to unified instruction/data, to - * harvard style separate instruction and data caches. - */ - -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272) -/* - * Simple version 2 core cache. These have instruction cache only, - * we just need to invalidate it and enable it. - */ -.macro CACHE_ENABLE - movel #0x01000000,%d0 /* invalidate cache cmd */ - movec %d0,%CACR /* do invalidate cache */ - movel #0x80000100,%d0 /* setup cache mask */ - movec %d0,%CACR /* enable cache */ -.endm -#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */ - -#if defined(CONFIG_M523x) || defined(CONFIG_M527x) -/* - * New version 2 cores have a configurable split cache arrangement. - * For now I am just enabling instruction cache - but ultimately I - * think a split instruction/data cache would be better. - */ -.macro CACHE_ENABLE - movel #0x01400000,%d0 - movec %d0,%CACR /* invalidate cache */ - nop - movel #0x0000c000,%d0 /* set SDRAM cached only */ - movec %d0,%ACR0 - movel #0x00000000,%d0 /* no other regions cached */ - movec %d0,%ACR1 - movel #0x80400100,%d0 /* configure cache */ - movec %d0,%CACR /* enable cache */ - nop -.endm -#endif /* CONFIG_M523x || CONFIG_M527x */ - -#if defined(CONFIG_M528x) -.macro CACHE_ENABLE - nop - movel #0x01000000, %d0 - movec %d0, %CACR /* Invalidate cache */ - nop - movel #0x0000c020, %d0 /* Set SDRAM cached only */ - movec %d0, %ACR0 - movel #0x00000000, %d0 /* No other regions cached */ - movec %d0, %ACR1 - movel #0x80000200, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop -.endm -#endif /* CONFIG_M528x */ - -#if defined(CONFIG_M5249) || defined(CONFIG_M5307) -/* - * The version 3 core cache. Oddly enough the version 2 core 5249 - * has the same SDRAM and cache setup as the version 3 cores. - * This is a single unified instruction/data cache. - */ -.macro CACHE_ENABLE - movel #0x01000000,%d0 /* invalidate whole cache */ - movec %d0,%CACR - nop -#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3) - movel #0x0000c000,%d0 /* set SDRAM cached (write-thru) */ -#else - movel #0x0000c020,%d0 /* set SDRAM cached (copyback) */ -#endif - movec %d0,%ACR0 - movel #0x00000000,%d0 /* no other regions cached */ - movec %d0,%ACR1 - movel #0xa0000200,%d0 /* enable cache */ - movec %d0,%CACR - nop -.endm -#endif /* CONFIG_M5249 || CONFIG_M5307 */ - -#if defined(CONFIG_M532x) -.macro CACHE_ENABLE - movel #0x01000000,%d0 /* invalidate cache cmd */ - movec %d0,%CACR /* do invalidate cache */ - nop - movel #0x4001C000,%d0 /* set SDRAM cached (write-thru) */ - movec %d0,%ACR0 - movel #0x00000000,%d0 /* no other regions cached */ - movec %d0,%ACR1 - movel #0x80000200,%d0 /* setup cache mask */ - movec %d0,%CACR /* enable cache */ - nop -.endm -#endif /* CONFIG_M532x */ - -#if defined(CONFIG_M5407) -/* - * Version 4 cores have a true harvard style separate instruction - * and data cache. Invalidate and enable cache, also enable write - * buffers and branch accelerator. - */ -.macro CACHE_ENABLE - movel #0x01040100,%d0 /* invalidate whole cache */ - movec %d0,%CACR - nop - movel #0x000fc000,%d0 /* set SDRAM cached only */ - movec %d0, %ACR0 - movel #0x00000000,%d0 /* no other regions cached */ - movec %d0, %ACR1 - movel #0x000fc000,%d0 /* set SDRAM cached only */ - movec %d0, %ACR2 - movel #0x00000000,%d0 /* no other regions cached */ - movec %d0, %ACR3 - movel #0xb6088400,%d0 /* enable caches */ - movec %d0,%CACR - nop -.endm -#endif /* CONFIG_M5407 */ - -#if defined(CONFIG_M520x) -.macro CACHE_ENABLE - move.l #0x01000000,%d0 /* invalidate whole cache */ - movec %d0,%CACR - nop - move.l #0x0000c000,%d0 /* set SDRAM cached (write-thru) */ - movec %d0,%ACR0 - move.l #0x00000000,%d0 /* no other regions cached */ - movec %d0,%ACR1 - move.l #0x80400000,%d0 /* enable 8K instruction cache */ - movec %d0,%CACR - nop -.endm -#endif /* CONFIG_M520x */ - -/****************************************************************************/ -#endif /* __M68KNOMMU_MCFCACHE_H */ diff --git a/include/asm-m68knommu/mcfdma.h b/include/asm-m68knommu/mcfdma.h deleted file mode 100644 index 705c52c79cd8..000000000000 --- a/include/asm-m68knommu/mcfdma.h +++ /dev/null @@ -1,144 +0,0 @@ -/****************************************************************************/ - -/* - * mcfdma.h -- Coldfire internal DMA support defines. - * - * (C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org) - */ - -/****************************************************************************/ -#ifndef mcfdma_h -#define mcfdma_h -/****************************************************************************/ - - -/* - * Get address specific defines for this Coldfire member. - */ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#define MCFDMA_BASE0 0x200 /* Base address of DMA 0 */ -#define MCFDMA_BASE1 0x240 /* Base address of DMA 1 */ -#elif defined(CONFIG_M5272) -#define MCFDMA_BASE0 0x0e0 /* Base address of DMA 0 */ -#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) -/* These are relative to the IPSBAR, not MBAR */ -#define MCFDMA_BASE0 0x100 /* Base address of DMA 0 */ -#define MCFDMA_BASE1 0x140 /* Base address of DMA 1 */ -#define MCFDMA_BASE2 0x180 /* Base address of DMA 2 */ -#define MCFDMA_BASE3 0x1C0 /* Base address of DMA 3 */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) -#define MCFDMA_BASE0 0x300 /* Base address of DMA 0 */ -#define MCFDMA_BASE1 0x340 /* Base address of DMA 1 */ -#define MCFDMA_BASE2 0x380 /* Base address of DMA 2 */ -#define MCFDMA_BASE3 0x3C0 /* Base address of DMA 3 */ -#endif - - -#if !defined(CONFIG_M5272) - -/* - * Define the DMA register set addresses. - * Note: these are longword registers, use unsigned long as data type - */ -#define MCFDMA_SAR 0x00 /* DMA source address (r/w) */ -#define MCFDMA_DAR 0x01 /* DMA destination adr (r/w) */ -/* these are word registers, use unsigned short data type */ -#define MCFDMA_DCR 0x04 /* DMA control reg (r/w) */ -#define MCFDMA_BCR 0x06 /* DMA byte count reg (r/w) */ -/* these are byte registers, use unsiged char data type */ -#define MCFDMA_DSR 0x10 /* DMA status reg (r/w) */ -#define MCFDMA_DIVR 0x14 /* DMA interrupt vec (r/w) */ - -/* - * Bit definitions for the DMA Control Register (DCR). - */ -#define MCFDMA_DCR_INT 0x8000 /* Enable completion irq */ -#define MCFDMA_DCR_EEXT 0x4000 /* Enable external DMA req */ -#define MCFDMA_DCR_CS 0x2000 /* Enable cycle steal */ -#define MCFDMA_DCR_AA 0x1000 /* Enable auto alignment */ -#define MCFDMA_DCR_BWC_MASK 0x0E00 /* Bandwidth ctl mask */ -#define MCFDMA_DCR_BWC_512 0x0200 /* Bandwidth: 512 Bytes */ -#define MCFDMA_DCR_BWC_1024 0x0400 /* Bandwidth: 1024 Bytes */ -#define MCFDMA_DCR_BWC_2048 0x0600 /* Bandwidth: 2048 Bytes */ -#define MCFDMA_DCR_BWC_4096 0x0800 /* Bandwidth: 4096 Bytes */ -#define MCFDMA_DCR_BWC_8192 0x0a00 /* Bandwidth: 8192 Bytes */ -#define MCFDMA_DCR_BWC_16384 0x0c00 /* Bandwidth: 16384 Bytes */ -#define MCFDMA_DCR_BWC_32768 0x0e00 /* Bandwidth: 32768 Bytes */ -#define MCFDMA_DCR_SAA 0x0100 /* Single Address Access */ -#define MCFDMA_DCR_S_RW 0x0080 /* SAA read/write value */ -#define MCFDMA_DCR_SINC 0x0040 /* Source addr inc enable */ -#define MCFDMA_DCR_SSIZE_MASK 0x0030 /* Src xfer size */ -#define MCFDMA_DCR_SSIZE_LONG 0x0000 /* Src xfer size, 00 = longw */ -#define MCFDMA_DCR_SSIZE_BYTE 0x0010 /* Src xfer size, 01 = byte */ -#define MCFDMA_DCR_SSIZE_WORD 0x0020 /* Src xfer size, 10 = word */ -#define MCFDMA_DCR_SSIZE_LINE 0x0030 /* Src xfer size, 11 = line */ -#define MCFDMA_DCR_DINC 0x0008 /* Dest addr inc enable */ -#define MCFDMA_DCR_DSIZE_MASK 0x0006 /* Dest xfer size */ -#define MCFDMA_DCR_DSIZE_LONG 0x0000 /* Dest xfer size, 00 = long */ -#define MCFDMA_DCR_DSIZE_BYTE 0x0002 /* Dest xfer size, 01 = byte */ -#define MCFDMA_DCR_DSIZE_WORD 0x0004 /* Dest xfer size, 10 = word */ -#define MCFDMA_DCR_DSIZE_LINE 0x0006 /* Dest xfer size, 11 = line */ -#define MCFDMA_DCR_START 0x0001 /* Start transfer */ - -/* - * Bit definitions for the DMA Status Register (DSR). - */ -#define MCFDMA_DSR_CE 0x40 /* Config error */ -#define MCFDMA_DSR_BES 0x20 /* Bus Error on source */ -#define MCFDMA_DSR_BED 0x10 /* Bus Error on dest */ -#define MCFDMA_DSR_REQ 0x04 /* Requests remaining */ -#define MCFDMA_DSR_BSY 0x02 /* Busy */ -#define MCFDMA_DSR_DONE 0x01 /* DMA transfer complete */ - -#else /* This is an MCF5272 */ - -#define MCFDMA_DMR 0x00 /* Mode Register (r/w) */ -#define MCFDMA_DIR 0x03 /* Interrupt trigger register (r/w) */ -#define MCFDMA_DSAR 0x03 /* Source Address register (r/w) */ -#define MCFDMA_DDAR 0x04 /* Destination Address register (r/w) */ -#define MCFDMA_DBCR 0x02 /* Byte Count Register (r/w) */ - -/* Bit definitions for the DMA Mode Register (DMR) */ -#define MCFDMA_DMR_RESET 0x80000000L /* Reset bit */ -#define MCFDMA_DMR_EN 0x40000000L /* DMA enable */ -#define MCFDMA_DMR_RQM 0x000C0000L /* Request Mode Mask */ -#define MCFDMA_DMR_RQM_DUAL 0x000C0000L /* Dual address mode, the only valid mode */ -#define MCFDMA_DMR_DSTM 0x00002000L /* Destination addressing mask */ -#define MCFDMA_DMR_DSTM_SA 0x00000000L /* Destination uses static addressing */ -#define MCFDMA_DMR_DSTM_IA 0x00002000L /* Destination uses incremental addressing */ -#define MCFDMA_DMR_DSTT_UD 0x00000400L /* Destination is user data */ -#define MCFDMA_DMR_DSTT_UC 0x00000800L /* Destination is user code */ -#define MCFDMA_DMR_DSTT_SD 0x00001400L /* Destination is supervisor data */ -#define MCFDMA_DMR_DSTT_SC 0x00001800L /* Destination is supervisor code */ -#define MCFDMA_DMR_DSTS_OFF 0x8 /* offset to the destination size bits */ -#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */ -#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */ -#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */ -#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */ -#define MCFDMA_DMR_SRCM 0x00000020L /* Source addressing mask */ -#define MCFDMA_DMR_SRCM_SA 0x00000000L /* Source uses static addressing */ -#define MCFDMA_DMR_SRCM_IA 0x00000020L /* Source uses incremental addressing */ -#define MCFDMA_DMR_SRCT_UD 0x00000004L /* Source is user data */ -#define MCFDMA_DMR_SRCT_UC 0x00000008L /* Source is user code */ -#define MCFDMA_DMR_SRCT_SD 0x00000014L /* Source is supervisor data */ -#define MCFDMA_DMR_SRCT_SC 0x00000018L /* Source is supervisor code */ -#define MCFDMA_DMR_SRCS_OFF 0x0 /* Offset to the source size bits */ -#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */ -#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */ -#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */ -#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */ - -/* Bit definitions for the DMA interrupt register (DIR) */ -#define MCFDMA_DIR_INVEN 0x1000 /* Invalid Combination interrupt enable */ -#define MCFDMA_DIR_ASCEN 0x0800 /* Address Sequence Complete (Completion) interrupt enable */ -#define MCFDMA_DIR_TEEN 0x0200 /* Transfer Error interrupt enable */ -#define MCFDMA_DIR_TCEN 0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */ -#define MCFDMA_DIR_INV 0x0010 /* Invalid Combination */ -#define MCFDMA_DIR_ASC 0x0008 /* Address Sequence Complete (DMA Completion) */ -#define MCFDMA_DIR_TE 0x0002 /* Transfer Error */ -#define MCFDMA_DIR_TC 0x0001 /* Transfer Complete */ - -#endif /* !defined(CONFIG_M5272) */ - -/****************************************************************************/ -#endif /* mcfdma_h */ diff --git a/include/asm-m68knommu/mcfmbus.h b/include/asm-m68knommu/mcfmbus.h deleted file mode 100644 index 319899c47a2c..000000000000 --- a/include/asm-m68knommu/mcfmbus.h +++ /dev/null @@ -1,77 +0,0 @@ -/****************************************************************************/ - -/* - * mcfmbus.h -- Coldfire MBUS support defines. - * - * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) - */ - -/****************************************************************************/ - - -#ifndef mcfmbus_h -#define mcfmbus_h - - -#define MCFMBUS_BASE 0x280 -#define MCFMBUS_IRQ_VECTOR 0x19 -#define MCFMBUS_IRQ 0x1 -#define MCFMBUS_CLK 0x3f -#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/ -#define MCFMBUS_ADDRESS 0x01 - - -/* -* Define the 5307 MBUS register set addresses -*/ - -#define MCFMBUS_MADR 0x00 -#define MCFMBUS_MFDR 0x04 -#define MCFMBUS_MBCR 0x08 -#define MCFMBUS_MBSR 0x0C -#define MCFMBUS_MBDR 0x10 - - -#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/ - -#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/ - -/* -* Define bit flags in Control Register -*/ - -#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */ -#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */ -#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */ -#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */ -#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */ -#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */ - -/* -* Define bit flags in Status Register -*/ - -#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */ -#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */ -#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */ -#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */ -#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */ -#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */ -#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */ - -/* -* Define bit flags in DATA I/O Register -*/ - -#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */ - -#define MBUSIOCSCLOCK 1 -#define MBUSIOCGCLOCK 2 -#define MBUSIOCSADDR 3 -#define MBUSIOCGADDR 4 -#define MBUSIOCSSLADDR 5 -#define MBUSIOCGSLADDR 6 -#define MBUSIOCSSUBADDR 7 -#define MBUSIOCGSUBADDR 8 - -#endif diff --git a/include/asm-m68knommu/mcfne.h b/include/asm-m68knommu/mcfne.h deleted file mode 100644 index 431f63aadd0e..000000000000 --- a/include/asm-m68knommu/mcfne.h +++ /dev/null @@ -1,325 +0,0 @@ -/****************************************************************************/ - -/* - * mcfne.h -- NE2000 in ColdFire eval boards. - * - * (C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo (www.lineo.com) - * (C) Copyright 2001, SnapGear (www.snapgear.com) - * - * 19990409 David W. Miller Converted from m5206ne.h for 5307 eval board - * - * Hacked support for m5206e Cadre III evaluation board - * Fred Stevens (fred.stevens@pemstar.com) 13 April 1999 - */ - -/****************************************************************************/ -#ifndef mcfne_h -#define mcfne_h -/****************************************************************************/ - - -/* - * Support for NE2000 clones devices in ColdFire based boards. - * Not all boards address these parts the same way, some use a - * direct addressing method, others use a side-band address space - * to access odd address registers, some require byte swapping - * others do not. - */ -#define BSWAP(w) (((w) << 8) | ((w) >> 8)) -#define RSWAP(w) (w) - - -/* - * Define the basic hardware resources of NE2000 boards. - */ - -#if defined(CONFIG_ARN5206) -#define NE2000_ADDR 0x40000300 -#define NE2000_ODDOFFSET 0x00010000 -#define NE2000_IRQ_VECTOR 0xf0 -#define NE2000_IRQ_PRIORITY 2 -#define NE2000_IRQ_LEVEL 4 -#define NE2000_BYTE volatile unsigned short -#endif - -#if defined(CONFIG_M5206eC3) -#define NE2000_ADDR 0x40000300 -#define NE2000_ODDOFFSET 0x00010000 -#define NE2000_IRQ_VECTOR 0x1c -#define NE2000_IRQ_PRIORITY 2 -#define NE2000_IRQ_LEVEL 4 -#define NE2000_BYTE volatile unsigned short -#endif - -#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel) -#define NE2000_ADDR 0x30000300 -#define NE2000_IRQ_VECTOR 25 -#define NE2000_IRQ_PRIORITY 1 -#define NE2000_IRQ_LEVEL 3 -#define NE2000_BYTE volatile unsigned char -#endif - -#if defined(CONFIG_M5307C3) -#define NE2000_ADDR 0x40000300 -#define NE2000_ODDOFFSET 0x00010000 -#define NE2000_IRQ_VECTOR 0x1b -#define NE2000_BYTE volatile unsigned short -#endif - -#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) -#define NE2000_ADDR 0x30600300 -#define NE2000_ODDOFFSET 0x00008000 -#define NE2000_IRQ_VECTOR 67 -#undef BSWAP -#define BSWAP(w) (w) -#define NE2000_BYTE volatile unsigned short -#undef RSWAP -#define RSWAP(w) (((w) << 8) | ((w) >> 8)) -#endif - -#if defined(CONFIG_M5307) && defined(CONFIG_NETtel) -#define NE2000_ADDR0 0x30600300 -#define NE2000_ADDR1 0x30800300 -#define NE2000_ODDOFFSET 0x00008000 -#define NE2000_IRQ_VECTOR0 27 -#define NE2000_IRQ_VECTOR1 29 -#undef BSWAP -#define BSWAP(w) (w) -#define NE2000_BYTE volatile unsigned short -#undef RSWAP -#define RSWAP(w) (((w) << 8) | ((w) >> 8)) -#endif - -#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3) -#define NE2000_ADDR 0x30600300 -#define NE2000_ODDOFFSET 0x00008000 -#define NE2000_IRQ_VECTOR 27 -#undef BSWAP -#define BSWAP(w) (w) -#define NE2000_BYTE volatile unsigned short -#undef RSWAP -#define RSWAP(w) (((w) << 8) | ((w) >> 8)) -#endif - -#if defined(CONFIG_ARN5307) -#define NE2000_ADDR 0xfe600300 -#define NE2000_ODDOFFSET 0x00010000 -#define NE2000_IRQ_VECTOR 0x1b -#define NE2000_IRQ_PRIORITY 2 -#define NE2000_IRQ_LEVEL 3 -#define NE2000_BYTE volatile unsigned short -#endif - -#if defined(CONFIG_M5407C3) -#define NE2000_ADDR 0x40000300 -#define NE2000_ODDOFFSET 0x00010000 -#define NE2000_IRQ_VECTOR 0x1b -#define NE2000_BYTE volatile unsigned short -#endif - -/****************************************************************************/ - -/* - * Side-band address space for odd address requires re-mapping - * many of the standard ISA access functions. - */ -#ifdef NE2000_ODDOFFSET - -#undef outb -#undef outb_p -#undef inb -#undef inb_p -#undef outsb -#undef outsw -#undef insb -#undef insw - -#define outb ne2000_outb -#define inb ne2000_inb -#define outb_p ne2000_outb -#define inb_p ne2000_inb -#define outsb ne2000_outsb -#define outsw ne2000_outsw -#define insb ne2000_insb -#define insw ne2000_insw - - -#ifndef COLDFIRE_NE2000_FUNCS - -void ne2000_outb(unsigned int val, unsigned int addr); -int ne2000_inb(unsigned int addr); -void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len); -void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len); -void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len); -void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len); - -#else - -/* - * This macro converts a conventional register address into the - * real memory pointer of the mapped NE2000 device. - * On most NE2000 implementations on ColdFire boards the chip is - * mapped in kinda funny, due to its ISA heritage. - */ -#define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr)) -#define NE2000_DATA_PTR(addr) (addr) - - -void ne2000_outb(unsigned int val, unsigned int addr) -{ - NE2000_BYTE *rp; - - rp = (NE2000_BYTE *) NE2000_PTR(addr); - *rp = RSWAP(val); -} - -int ne2000_inb(unsigned int addr) -{ - NE2000_BYTE *rp, val; - - rp = (NE2000_BYTE *) NE2000_PTR(addr); - val = *rp; - return((int) ((NE2000_BYTE) RSWAP(val))); -} - -void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len) -{ - NE2000_BYTE *rp, val; - unsigned char *buf; - - buf = (unsigned char *) vbuf; - rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - val = *rp; - *buf++ = RSWAP(val); - } -} - -void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short w, *buf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - w = *rp; - *buf++ = BSWAP(w); - } -} - -void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len) -{ - NE2000_BYTE *rp, val; - unsigned char *buf; - - buf = (unsigned char *) vbuf; - rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - val = *buf++; - *rp = RSWAP(val); - } -} - -void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short w, *buf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - w = *buf++; - *rp = BSWAP(w); - } -} - -#endif /* COLDFIRE_NE2000_FUNCS */ -#endif /* NE2000_OFFOFFSET */ - -/****************************************************************************/ - -#ifdef COLDFIRE_NE2000_FUNCS - -/* - * Lastly the interrupt set up code... - * Minor differences between the different board types. - */ - -#if defined(CONFIG_ARN5206) -void ne2000_irqsetup(int irq) -{ - volatile unsigned char *icrp; - - icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); - *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2; - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); -} -#endif - -#if defined(CONFIG_M5206eC3) -void ne2000_irqsetup(int irq) -{ - volatile unsigned char *icrp; - - icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); - *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC; - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); -} -#endif - -#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel) -void ne2000_irqsetup(int irq) -{ - mcf_autovector(irq); -} -#endif - -#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) -void ne2000_irqsetup(int irq) -{ - volatile unsigned long *icrp; - volatile unsigned long *pitr; - - /* The NE2000 device uses external IRQ3 */ - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = (*icrp & 0x77077777) | 0x00d00000; - - pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR); - *pitr = *pitr | 0x20000000; -} - -void ne2000_irqack(int irq) -{ - volatile unsigned long *icrp; - - /* The NE2000 device uses external IRQ3 */ - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = (*icrp & 0x77777777) | 0x00800000; -} -#endif - -#if defined(CONFIG_M5307) || defined(CONFIG_M5407) -#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) - -void ne2000_irqsetup(int irq) -{ - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); - mcf_autovector(irq); -} - -#else - -void ne2000_irqsetup(int irq) -{ - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); -} - -#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */ -#endif /* CONFIG_M5307 || CONFIG_M5407 */ - -#endif /* COLDFIRE_NE2000_FUNCS */ - -/****************************************************************************/ -#endif /* mcfne_h */ diff --git a/include/asm-m68knommu/mcfpci.h b/include/asm-m68knommu/mcfpci.h deleted file mode 100644 index f1507dd06ec6..000000000000 --- a/include/asm-m68knommu/mcfpci.h +++ /dev/null @@ -1,119 +0,0 @@ -/****************************************************************************/ - -/* - * mcfpci.h -- PCI bridge on ColdFire eval boards. - * - * (C) Copyright 2000, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfpci_h -#define mcfpci_h -/****************************************************************************/ - - -#ifdef CONFIG_PCI - -/* - * Address regions in the PCI address space are not mapped into the - * normal memory space of the ColdFire. They must be accessed via - * handler routines. This is easy for I/O space (inb/outb/etc) but - * needs some code changes to support ordinary memory. Interrupts - * also need to be vectored through the PCI handler first, then it - * will call the actual driver sub-handlers. - */ - -/* - * Un-define all the standard I/O access routines. - */ -#undef inb -#undef inw -#undef inl -#undef inb_p -#undef inw_p -#undef insb -#undef insw -#undef insl -#undef outb -#undef outw -#undef outl -#undef outb_p -#undef outw_p -#undef outsb -#undef outsw -#undef outsl - -#undef request_irq -#undef free_irq - -#undef bus_to_virt -#undef virt_to_bus - - -/* - * Re-direct all I/O memory accesses functions to PCI specific ones. - */ -#define inb pci_inb -#define inw pci_inw -#define inl pci_inl -#define inb_p pci_inb -#define inw_p pci_inw -#define insb pci_insb -#define insw pci_insw -#define insl pci_insl - -#define outb pci_outb -#define outw pci_outw -#define outl pci_outl -#define outb_p pci_outb -#define outw_p pci_outw -#define outsb pci_outsb -#define outsw pci_outsw -#define outsl pci_outsl - -#define request_irq pci_request_irq -#define free_irq pci_free_irq - -#define virt_to_bus pci_virt_to_bus -#define bus_to_virt pci_bus_to_virt - -#define CONFIG_COMEMPCI 1 - - -/* - * Prototypes of the real PCI functions (defined in bios32.c). - */ -unsigned char pci_inb(unsigned int addr); -unsigned short pci_inw(unsigned int addr); -unsigned int pci_inl(unsigned int addr); -void pci_insb(void *addr, void *buf, int len); -void pci_insw(void *addr, void *buf, int len); -void pci_insl(void *addr, void *buf, int len); - -void pci_outb(unsigned char val, unsigned int addr); -void pci_outw(unsigned short val, unsigned int addr); -void pci_outl(unsigned int val, unsigned int addr); -void pci_outsb(void *addr, void *buf, int len); -void pci_outsw(void *addr, void *buf, int len); -void pci_outsl(void *addr, void *buf, int len); - -int pci_request_irq(unsigned int irq, - void (*handler)(int, void *, struct pt_regs *), - unsigned long flags, - const char *device, - void *dev_id); -void pci_free_irq(unsigned int irq, void *dev_id); - -void *pci_bmalloc(int size); -void pci_bmfree(void *bmp, int len); -void pci_copytoshmem(unsigned long bmp, void *src, int size); -void pci_copyfromshmem(void *dst, unsigned long bmp, int size); -unsigned long pci_virt_to_bus(volatile void *address); -void *pci_bus_to_virt(unsigned long address); -void pci_bmcpyto(void *dst, void *src, int len); -void pci_bmcpyfrom(void *dst, void *src, int len); - -#endif /* CONFIG_PCI */ -/****************************************************************************/ -#endif /* mcfpci_h */ diff --git a/include/asm-m68knommu/mcfpit.h b/include/asm-m68knommu/mcfpit.h deleted file mode 100644 index f570cf64fd29..000000000000 --- a/include/asm-m68knommu/mcfpit.h +++ /dev/null @@ -1,64 +0,0 @@ -/****************************************************************************/ - -/* - * mcfpit.h -- ColdFire internal PIT timer support defines. - * - * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com) - */ - -/****************************************************************************/ -#ifndef mcfpit_h -#define mcfpit_h -/****************************************************************************/ - - -/* - * Get address specific defines for the 5270/5271, 5280/5282, and 5208. - */ -#if defined(CONFIG_M520x) -#define MCFPIT_BASE1 0x00080000 /* Base address of TIMER1 */ -#define MCFPIT_BASE2 0x00084000 /* Base address of TIMER2 */ -#else -#define MCFPIT_BASE1 0x00150000 /* Base address of TIMER1 */ -#define MCFPIT_BASE2 0x00160000 /* Base address of TIMER2 */ -#define MCFPIT_BASE3 0x00170000 /* Base address of TIMER3 */ -#define MCFPIT_BASE4 0x00180000 /* Base address of TIMER4 */ -#endif - -/* - * Define the PIT timer register set addresses. - */ -#define MCFPIT_PCSR 0x0 /* PIT control register */ -#define MCFPIT_PMR 0x2 /* PIT modulus register */ -#define MCFPIT_PCNTR 0x4 /* PIT count register */ - -/* - * Bit definitions for the PIT Control and Status register. - */ -#define MCFPIT_PCSR_CLK1 0x0000 /* System clock divisor */ -#define MCFPIT_PCSR_CLK2 0x0100 /* System clock divisor */ -#define MCFPIT_PCSR_CLK4 0x0200 /* System clock divisor */ -#define MCFPIT_PCSR_CLK8 0x0300 /* System clock divisor */ -#define MCFPIT_PCSR_CLK16 0x0400 /* System clock divisor */ -#define MCFPIT_PCSR_CLK32 0x0500 /* System clock divisor */ -#define MCFPIT_PCSR_CLK64 0x0600 /* System clock divisor */ -#define MCFPIT_PCSR_CLK128 0x0700 /* System clock divisor */ -#define MCFPIT_PCSR_CLK256 0x0800 /* System clock divisor */ -#define MCFPIT_PCSR_CLK512 0x0900 /* System clock divisor */ -#define MCFPIT_PCSR_CLK1024 0x0a00 /* System clock divisor */ -#define MCFPIT_PCSR_CLK2048 0x0b00 /* System clock divisor */ -#define MCFPIT_PCSR_CLK4096 0x0c00 /* System clock divisor */ -#define MCFPIT_PCSR_CLK8192 0x0d00 /* System clock divisor */ -#define MCFPIT_PCSR_CLK16384 0x0e00 /* System clock divisor */ -#define MCFPIT_PCSR_CLK32768 0x0f00 /* System clock divisor */ -#define MCFPIT_PCSR_DOZE 0x0040 /* Clock run in doze mode */ -#define MCFPIT_PCSR_HALTED 0x0020 /* Clock run in halt mode */ -#define MCFPIT_PCSR_OVW 0x0010 /* Overwrite PIT counter now */ -#define MCFPIT_PCSR_PIE 0x0008 /* Enable PIT interrupt */ -#define MCFPIT_PCSR_PIF 0x0004 /* PIT interrupt flag */ -#define MCFPIT_PCSR_RLD 0x0002 /* Reload counter */ -#define MCFPIT_PCSR_EN 0x0001 /* Enable PIT */ -#define MCFPIT_PCSR_DISABLE 0x0000 /* Disable PIT */ - -/****************************************************************************/ -#endif /* mcfpit_h */ diff --git a/include/asm-m68knommu/mcfsim.h b/include/asm-m68knommu/mcfsim.h deleted file mode 100644 index da3f2ceff3a4..000000000000 --- a/include/asm-m68knommu/mcfsim.h +++ /dev/null @@ -1,126 +0,0 @@ -/****************************************************************************/ - -/* - * mcfsim.h -- ColdFire System Integration Module support. - * - * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfsim_h -#define mcfsim_h -/****************************************************************************/ - - -/* - * Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282, - * 5307 or 5407 specific addresses. - */ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#include -#elif defined(CONFIG_M520x) -#include -#elif defined(CONFIG_M523x) -#include -#elif defined(CONFIG_M5249) -#include -#elif defined(CONFIG_M527x) -#include -#elif defined(CONFIG_M5272) -#include -#elif defined(CONFIG_M528x) -#include -#elif defined(CONFIG_M5307) -#include -#elif defined(CONFIG_M532x) -#include -#elif defined(CONFIG_M5407) -#include -#endif - - -/* - * Define the base address of the SIM within the MBAR address space. - */ -#define MCFSIM_BASE 0x0 /* Base address of SIM */ - - -/* - * Bit definitions for the ICR family of registers. - */ -#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ -#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ -#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ -#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ -#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ -#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ -#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ -#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ -#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ - -#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ -#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ -#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ -#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ - -/* - * Bit definitions for the Interrupt Mask register (IMR). - */ -#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */ -#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */ -#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */ -#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */ -#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */ -#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */ -#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */ - -#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */ -#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */ -#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */ -#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */ -#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */ -#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */ - -#if defined(CONFIG_M5206e) -#define MCFSIM_IMR_DMA1 0x4000 /* DMA 1 intr */ -#define MCFSIM_IMR_DMA2 0x8000 /* DMA 2 intr */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) -#define MCFSIM_IMR_DMA0 0x4000 /* DMA 0 intr */ -#define MCFSIM_IMR_DMA1 0x8000 /* DMA 1 intr */ -#define MCFSIM_IMR_DMA2 0x10000 /* DMA 2 intr */ -#define MCFSIM_IMR_DMA3 0x20000 /* DMA 3 intr */ -#endif - -/* - * Mask for all of the SIM devices. Some parts have more or less - * SIM devices. This is a catchall for the sandard set. - */ -#ifndef MCFSIM_IMR_MASKALL -#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */ -#endif - - -/* - * PIT interrupt settings, if not found in mXXXXsim.h file. - */ -#ifndef ICR_INTRCONF -#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */ -#endif -#ifndef MCFPIT_IMR -#define MCFPIT_IMR MCFINTC_IMRH -#endif -#ifndef MCFPIT_IMR_IBIT -#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32)) -#endif - - -#ifndef __ASSEMBLY__ -/* - * Definition for the interrupt auto-vectoring support. - */ -extern void mcf_autovector(unsigned int vec); -#endif /* __ASSEMBLY__ */ - -/****************************************************************************/ -#endif /* mcfsim_h */ diff --git a/include/asm-m68knommu/mcfsmc.h b/include/asm-m68knommu/mcfsmc.h deleted file mode 100644 index 2d7a4dbd9683..000000000000 --- a/include/asm-m68knommu/mcfsmc.h +++ /dev/null @@ -1,187 +0,0 @@ -/****************************************************************************/ - -/* - * mcfsmc.h -- SMC ethernet support for ColdFire environments. - * - * (C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfsmc_h -#define mcfsmc_h -/****************************************************************************/ - -/* - * None of the current ColdFire targets that use the SMC91x111 - * allow 8 bit accesses. So this code is 16bit access only. - */ - - -#undef outb -#undef inb -#undef outw -#undef outwd -#undef inw -#undef outl -#undef inl - -#undef outsb -#undef outsw -#undef outsl -#undef insb -#undef insw -#undef insl - -/* - * Re-defines for ColdFire environment... The SMC part is - * mapped into memory space, so remap the PC-style in/out - * routines to handle that. - */ -#define outb smc_outb -#define inb smc_inb -#define outw smc_outw -#define outwd smc_outwd -#define inw smc_inw -#define outl smc_outl -#define inl smc_inl - -#define outsb smc_outsb -#define outsw smc_outsw -#define outsl smc_outsl -#define insb smc_insb -#define insw smc_insw -#define insl smc_insl - - -static inline int smc_inb(unsigned int addr) -{ - register unsigned short w; - w = *((volatile unsigned short *) (addr & ~0x1)); - return(((addr & 0x1) ? w : (w >> 8)) & 0xff); -} - -static inline void smc_outw(unsigned int val, unsigned int addr) -{ - *((volatile unsigned short *) addr) = (val << 8) | (val >> 8); -} - -static inline int smc_inw(unsigned int addr) -{ - register unsigned short w; - w = *((volatile unsigned short *) addr); - return(((w << 8) | (w >> 8)) & 0xffff); -} - -static inline void smc_outl(unsigned long val, unsigned int addr) -{ - *((volatile unsigned long *) addr) = - ((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) | - ((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff); -} - -static inline void smc_outwd(unsigned int val, unsigned int addr) -{ - *((volatile unsigned short *) addr) = val; -} - - -/* - * The rep* functions are used to feed the data port with - * raw data. So we do not byte swap them when copying. - */ - -static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len) -{ - volatile unsigned short *rp; - unsigned short *buf, *ebuf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) addr; - - /* Copy as words for as long as possible */ - for (ebuf = buf + (len >> 1); (buf < ebuf); ) - *buf++ = *rp; - - /* Lastly, handle left over byte */ - if (len & 0x1) - *((unsigned char *) buf) = (*rp >> 8) & 0xff; -} - -static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short *buf, *ebuf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *buf++ = *rp; -} - -static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned long *rp; - unsigned long *buf, *ebuf; - - buf = (unsigned long *) vbuf; - rp = (volatile unsigned long *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *buf++ = *rp; -} - -static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short *buf, *ebuf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *rp = *buf++; -} - -static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned long *rp; - unsigned long *buf, *ebuf; - - buf = (unsigned long *) vbuf; - rp = (volatile unsigned long *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *rp = *buf++; -} - - -#ifdef CONFIG_NETtel -/* - * Re-map the address space of at least one of the SMC ethernet - * parts. Both parts power up decoding the same address, so we - * need to move one of them first, before doing enything else. - * - * We also increase the number of wait states for this part by one. - */ - -void smc_remap(unsigned int ioaddr) -{ - static int once = 0; - extern unsigned short ppdata; - if (once++ == 0) { - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec; - ppdata |= 0x0080; - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; - outw(0x0001, ioaddr + BANK_SELECT); - outw(0x0001, ioaddr + BANK_SELECT); - outw(0x0067, ioaddr + BASE); - - ppdata &= ~0x0080; - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; - } - - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180; -} - -#endif - -/****************************************************************************/ -#endif /* mcfsmc_h */ diff --git a/include/asm-m68knommu/mcftimer.h b/include/asm-m68knommu/mcftimer.h deleted file mode 100644 index 0f90f6d2227a..000000000000 --- a/include/asm-m68knommu/mcftimer.h +++ /dev/null @@ -1,80 +0,0 @@ -/****************************************************************************/ - -/* - * mcftimer.h -- ColdFire internal TIMER support defines. - * - * (C) Copyright 1999-2006, Greg Ungerer - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcftimer_h -#define mcftimer_h -/****************************************************************************/ - - -/* - * Get address specific defines for this ColdFire member. - */ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */ -#elif defined(CONFIG_M5272) -#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */ -#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */ -#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) -#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */ -#elif defined(CONFIG_M532x) -#define MCFTIMER_BASE1 0xfc070000 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0xfc074000 /* Base address of TIMER2 */ -#define MCFTIMER_BASE3 0xfc078000 /* Base address of TIMER3 */ -#define MCFTIMER_BASE4 0xfc07c000 /* Base address of TIMER4 */ -#endif - - -/* - * Define the TIMER register set addresses. - */ -#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */ -#define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */ -#define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */ -#define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */ -#if defined(CONFIG_M532x) -#define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */ -#else -#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */ -#endif - -/* - * Bit definitions for the Timer Mode Register (TMR). - * Register bit flags are common accross ColdFires. - */ -#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */ -#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */ -#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */ -#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */ -#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */ -#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */ -#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */ -#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */ -#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */ -#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */ -#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */ -#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */ -#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */ -#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */ -#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */ -#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */ -#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */ - -/* - * Bit definitions for the Timer Event Registers (TER). - */ -#define MCFTIMER_TER_CAP 0x01 /* Capture event */ -#define MCFTIMER_TER_REF 0x02 /* Refernece event */ - -/****************************************************************************/ -#endif /* mcftimer_h */ diff --git a/include/asm-m68knommu/mcfuart.h b/include/asm-m68knommu/mcfuart.h deleted file mode 100644 index ef2293873612..000000000000 --- a/include/asm-m68knommu/mcfuart.h +++ /dev/null @@ -1,216 +0,0 @@ -/****************************************************************************/ - -/* - * mcfuart.h -- ColdFire internal UART support defines. - * - * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfuart_h -#define mcfuart_h -/****************************************************************************/ - -/* - * Define the base address of the UARTS within the MBAR address - * space. - */ -#if defined(CONFIG_M5272) -#define MCFUART_BASE1 0x100 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ -#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#if defined(CONFIG_NETtel) -#define MCFUART_BASE1 0x180 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ -#else -#define MCFUART_BASE1 0x140 /* Base address of UART1 */ -#define MCFUART_BASE2 0x180 /* Base address of UART2 */ -#endif -#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x240 /* Base address of UART2 */ -#define MCFUART_BASE3 0x280 /* Base address of UART3 */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) -#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ -#else -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ -#endif -#elif defined(CONFIG_M520x) -#define MCFUART_BASE1 0x60000 /* Base address of UART1 */ -#define MCFUART_BASE2 0x64000 /* Base address of UART2 */ -#define MCFUART_BASE3 0x68000 /* Base address of UART2 */ -#elif defined(CONFIG_M532x) -#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */ -#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */ -#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */ -#endif - - -#include -#include - -struct mcf_platform_uart { - unsigned long mapbase; /* Physical address base */ - void __iomem *membase; /* Virtual address if mapped */ - unsigned int irq; /* Interrupt vector */ - unsigned int uartclk; /* UART clock rate */ -}; - -/* - * Define the ColdFire UART register set addresses. - */ -#define MCFUART_UMR 0x00 /* Mode register (r/w) */ -#define MCFUART_USR 0x04 /* Status register (r) */ -#define MCFUART_UCSR 0x04 /* Clock Select (w) */ -#define MCFUART_UCR 0x08 /* Command register (w) */ -#define MCFUART_URB 0x0c /* Receiver Buffer (r) */ -#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ -#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ -#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ -#define MCFUART_UISR 0x14 /* Interrupt Status (r) */ -#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ -#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ -#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ -#ifdef CONFIG_M5272 -#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ -#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ -#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ -#else -#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ -#endif -#define MCFUART_UIPR 0x34 /* Input Port (r) */ -#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ -#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ - - -/* - * Define bit flags in Mode Register 1 (MR1). - */ -#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ -#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ -#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ -#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ -#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ - -#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ -#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ -#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ -#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ -#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ - -#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ -#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ -#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ -#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ - -/* - * Define bit flags in Mode Register 2 (MR2). - */ -#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ -#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ -#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ -#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ -#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ - -#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ -#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ -#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ - -/* - * Define bit flags in Status Register (USR). - */ -#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ -#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ -#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ -#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ -#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ -#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ -#define MCFUART_USR_RXFULL 0x02 /* Receiver full */ -#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ - -#define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \ - MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN) - -/* - * Define bit flags in Clock Select Register (UCSR). - */ -#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ -#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ -#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ - -#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ -#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ -#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ - -/* - * Define bit flags in Command Register (UCR). - */ -#define MCFUART_UCR_CMDNULL 0x00 /* No command */ -#define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */ -#define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */ -#define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */ -#define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */ -#define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */ -#define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */ -#define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */ - -#define MCFUART_UCR_TXNULL 0x00 /* No TX command */ -#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ -#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ -#define MCFUART_UCR_RXNULL 0x00 /* No RX command */ -#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ -#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ - -/* - * Define bit flags in Input Port Change Register (UIPCR). - */ -#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ -#define MCFUART_UIPCR_CTS 0x01 /* CTS value */ - -/* - * Define bit flags in Input Port Register (UIP). - */ -#define MCFUART_UIPR_CTS 0x01 /* CTS value */ - -/* - * Define bit flags in Output Port Registers (UOP). - * Clear bit by writing to UOP0, set by writing to UOP1. - */ -#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ - -/* - * Define bit flags in the Auxiliary Control Register (UACR). - */ -#define MCFUART_UACR_IEC 0x01 /* Input enable control */ - -/* - * Define bit flags in Interrupt Status Register (UISR). - * These same bits are used for the Interrupt Mask Register (UIMR). - */ -#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ -#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ -#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ -#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ - -#ifdef CONFIG_M5272 -/* - * Define bit flags in the Transmitter FIFO Register (UTF). - */ -#define MCFUART_UTF_TXB 0x1f /* Transmitter data level */ -#define MCFUART_UTF_FULL 0x20 /* Transmitter fifo full */ -#define MCFUART_UTF_TXS 0xc0 /* Transmitter status */ - -/* - * Define bit flags in the Receiver FIFO Register (URF). - */ -#define MCFUART_URF_RXB 0x1f /* Receiver data level */ -#define MCFUART_URF_FULL 0x20 /* Receiver fifo full */ -#define MCFUART_URF_RXS 0xc0 /* Receiver status */ -#endif - -/****************************************************************************/ -#endif /* mcfuart_h */ diff --git a/include/asm-m68knommu/mcfwdebug.h b/include/asm-m68knommu/mcfwdebug.h deleted file mode 100644 index 27f70e45d700..000000000000 --- a/include/asm-m68knommu/mcfwdebug.h +++ /dev/null @@ -1,118 +0,0 @@ -/****************************************************************************/ - -/* - * mcfdebug.h -- ColdFire Debug Module support. - * - * (C) Copyright 2001, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfdebug_h -#define mcfdebug_h -/****************************************************************************/ - -/* Define the debug module registers */ -#define MCFDEBUG_CSR 0x0 /* Configuration status */ -#define MCFDEBUG_BAAR 0x5 /* BDM address attribute */ -#define MCFDEBUG_AATR 0x6 /* Address attribute trigger */ -#define MCFDEBUG_TDR 0x7 /* Trigger definition */ -#define MCFDEBUG_PBR 0x8 /* PC breakpoint */ -#define MCFDEBUG_PBMR 0x9 /* PC breakpoint mask */ -#define MCFDEBUG_ABHR 0xc /* High address breakpoint */ -#define MCFDEBUG_ABLR 0xd /* Low address breakpoint */ -#define MCFDEBUG_DBR 0xe /* Data breakpoint */ -#define MCFDEBUG_DBMR 0xf /* Data breakpoint mask */ - -/* Define some handy constants for the trigger definition register */ -#define MCFDEBUG_TDR_TRC_DISP 0x00000000 /* display on DDATA only */ -#define MCFDEBUG_TDR_TRC_HALT 0x40000000 /* Processor halt on BP */ -#define MCFDEBUG_TDR_TRC_INTR 0x80000000 /* Debug intr on BP */ -#define MCFDEBUG_TDR_LXT1 0x00004000 /* TDR level 1 */ -#define MCFDEBUG_TDR_LXT2 0x00008000 /* TDR level 2 */ -#define MCFDEBUG_TDR_EBL1 0x00002000 /* Enable breakpoint level 1 */ -#define MCFDEBUG_TDR_EBL2 0x20000000 /* Enable breakpoint level 2 */ -#define MCFDEBUG_TDR_EDLW1 0x00001000 /* Enable data BP longword */ -#define MCFDEBUG_TDR_EDLW2 0x10000000 -#define MCFDEBUG_TDR_EDWL1 0x00000800 /* Enable data BP lower word */ -#define MCFDEBUG_TDR_EDWL2 0x08000000 -#define MCFDEBUG_TDR_EDWU1 0x00000400 /* Enable data BP upper word */ -#define MCFDEBUG_TDR_EDWU2 0x04000000 -#define MCFDEBUG_TDR_EDLL1 0x00000200 /* Enable data BP low low byte */ -#define MCFDEBUG_TDR_EDLL2 0x02000000 -#define MCFDEBUG_TDR_EDLM1 0x00000100 /* Enable data BP low mid byte */ -#define MCFDEBUG_TDR_EDLM2 0x01000000 -#define MCFDEBUG_TDR_EDUM1 0x00000080 /* Enable data BP up mid byte */ -#define MCFDEBUG_TDR_EDUM2 0x00800000 -#define MCFDEBUG_TDR_EDUU1 0x00000040 /* Enable data BP up up byte */ -#define MCFDEBUG_TDR_EDUU2 0x00400000 -#define MCFDEBUG_TDR_DI1 0x00000020 /* Data BP invert */ -#define MCFDEBUG_TDR_DI2 0x00200000 -#define MCFDEBUG_TDR_EAI1 0x00000010 /* Enable address BP inverted */ -#define MCFDEBUG_TDR_EAI2 0x00100000 -#define MCFDEBUG_TDR_EAR1 0x00000008 /* Enable address BP range */ -#define MCFDEBUG_TDR_EAR2 0x00080000 -#define MCFDEBUG_TDR_EAL1 0x00000004 /* Enable address BP low */ -#define MCFDEBUG_TDR_EAL2 0x00040000 -#define MCFDEBUG_TDR_EPC1 0x00000002 /* Enable PC BP */ -#define MCFDEBUG_TDR_EPC2 0x00020000 -#define MCFDEBUG_TDR_PCI1 0x00000001 /* PC BP invert */ -#define MCFDEBUG_TDR_PCI2 0x00010000 - -/* Constants for the address attribute trigger register */ -#define MCFDEBUG_AAR_RESET 0x00000005 -/* Fields not yet implemented */ - -/* And some definitions for the writable sections of the CSR */ -#define MCFDEBUG_CSR_RESET 0x00100000 -#define MCFDEBUG_CSR_PSTCLK 0x00020000 /* PSTCLK disable */ -#define MCFDEBUG_CSR_IPW 0x00010000 /* Inhibit processor writes */ -#define MCFDEBUG_CSR_MAP 0x00008000 /* Processor refs in emul mode */ -#define MCFDEBUG_CSR_TRC 0x00004000 /* Emul mode on trace exception */ -#define MCFDEBUG_CSR_EMU 0x00002000 /* Force emulation mode */ -#define MCFDEBUG_CSR_DDC_READ 0x00000800 /* Debug data control */ -#define MCFDEBUG_CSR_DDC_WRITE 0x00001000 -#define MCFDEBUG_CSR_UHE 0x00000400 /* User mode halt enable */ -#define MCFDEBUG_CSR_BTB0 0x00000000 /* Branch target 0 bytes */ -#define MCFDEBUG_CSR_BTB2 0x00000100 /* Branch target 2 bytes */ -#define MCFDEBUG_CSR_BTB3 0x00000200 /* Branch target 3 bytes */ -#define MCFDEBUG_CSR_BTB4 0x00000300 /* Branch target 4 bytes */ -#define MCFDEBUG_CSR_NPL 0x00000040 /* Non-pipelined mode */ -#define MCFDEBUG_CSR_SSM 0x00000010 /* Single step mode */ - -/* Constants for the BDM address attribute register */ -#define MCFDEBUG_BAAR_RESET 0x00000005 -/* Fields not yet implemented */ - - -/* This routine wrappers up the wdebug asm instruction so that the register - * and value can be relatively easily specified. The biggest hassle here is - * that the debug module instructions (2 longs) must be long word aligned and - * some pointer fiddling is performed to ensure this. - */ -static inline void wdebug(int reg, unsigned long data) { - unsigned short dbg_spc[6]; - unsigned short *dbg; - - // Force alignment to long word boundary - dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc); - - // Build up the debug instruction - dbg[0] = 0x2c80 | (reg & 0xf); - dbg[1] = (data >> 16) & 0xffff; - dbg[2] = data & 0xffff; - dbg[3] = 0; - - // Perform the wdebug instruction -#if 0 - // This strain is for gas which doesn't have the wdebug instructions defined - asm( "move.l %0, %%a0\n\t" - ".word 0xfbd0\n\t" - ".word 0x0003\n\t" - :: "g" (dbg) : "a0"); -#else - // And this is for when it does - asm( "wdebug (%0)" :: "a" (dbg)); -#endif -} - -#endif diff --git a/include/asm-m68knommu/md.h b/include/asm-m68knommu/md.h deleted file mode 100644 index d810c78de5ff..000000000000 --- a/include/asm-m68knommu/md.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/mman.h b/include/asm-m68knommu/mman.h deleted file mode 100644 index 4846c682efed..000000000000 --- a/include/asm-m68knommu/mman.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/mmu.h b/include/asm-m68knommu/mmu.h deleted file mode 100644 index 5fa6b68353ba..000000000000 --- a/include/asm-m68knommu/mmu.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __M68KNOMMU_MMU_H -#define __M68KNOMMU_MMU_H - -/* Copyright (C) 2002, David McCullough */ - -typedef struct { - struct vm_list_struct *vmlist; - unsigned long end_brk; -} mm_context_t; - -#endif /* __M68KNOMMU_MMU_H */ diff --git a/include/asm-m68knommu/mmu_context.h b/include/asm-m68knommu/mmu_context.h deleted file mode 100644 index 9ccee4278c97..000000000000 --- a/include/asm-m68knommu/mmu_context.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef __M68KNOMMU_MMU_CONTEXT_H -#define __M68KNOMMU_MMU_CONTEXT_H - -#include -#include -#include -#include - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -static inline int -init_new_context(struct task_struct *tsk, struct mm_struct *mm) -{ - // mm->context = virt_to_phys(mm->pgd); - return(0); -} - -#define destroy_context(mm) do { } while(0) - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) -{ -} - -#define deactivate_mm(tsk,mm) do { } while (0) - -static inline void activate_mm(struct mm_struct *prev_mm, - struct mm_struct *next_mm) -{ -} - -#endif diff --git a/include/asm-m68knommu/module.h b/include/asm-m68knommu/module.h deleted file mode 100644 index 2e45ab50b232..000000000000 --- a/include/asm-m68knommu/module.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef ASM_M68KNOMMU_MODULE_H -#define ASM_M68KNOMMU_MODULE_H - -struct mod_arch_specific { -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - -#endif /* ASM_M68KNOMMU_MODULE_H */ diff --git a/include/asm-m68knommu/movs.h b/include/asm-m68knommu/movs.h deleted file mode 100644 index 81a16779e833..000000000000 --- a/include/asm-m68knommu/movs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/msgbuf.h b/include/asm-m68knommu/msgbuf.h deleted file mode 100644 index bdfadec4d52d..000000000000 --- a/include/asm-m68knommu/msgbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/mutex.h b/include/asm-m68knommu/mutex.h deleted file mode 100644 index 458c1f7fbc18..000000000000 --- a/include/asm-m68knommu/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/include/asm-m68knommu/nettel.h b/include/asm-m68knommu/nettel.h deleted file mode 100644 index 0299f6a2deeb..000000000000 --- a/include/asm-m68knommu/nettel.h +++ /dev/null @@ -1,108 +0,0 @@ -/****************************************************************************/ - -/* - * nettel.h -- Lineo (formerly Moreton Bay) NETtel support. - * - * (C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com) - * (C) Copyright 2000-2001, Lineo Inc. (www.lineo.com) - * (C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com) - */ - -/****************************************************************************/ -#ifndef nettel_h -#define nettel_h -/****************************************************************************/ - - -/****************************************************************************/ -#ifdef CONFIG_NETtel -/****************************************************************************/ - -#ifdef CONFIG_COLDFIRE -#include -#include -#endif - -/*---------------------------------------------------------------------------*/ -#if defined(CONFIG_M5307) -/* - * NETtel/5307 based hardware first. DTR/DCD lines are wired to - * GPIO lines. Most of the LED's are driver through a latch - * connected to CS2. - */ -#define MCFPP_DCD1 0x0001 -#define MCFPP_DCD0 0x0002 -#define MCFPP_DTR1 0x0004 -#define MCFPP_DTR0 0x0008 - -#define NETtel_LEDADDR 0x30400000 - -#ifndef __ASSEMBLY__ - -extern volatile unsigned short ppdata; - -/* - * These functions defined to give quasi generic access to the - * PPIO bits used for DTR/DCD. - */ -static __inline__ unsigned int mcf_getppdata(void) -{ - volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); - return((unsigned int) *pp); -} - -static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) -{ - volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); - ppdata = (ppdata & ~mask) | bits; - *pp = ppdata; -} -#endif - -/*---------------------------------------------------------------------------*/ -#elif defined(CONFIG_M5206e) -/* - * NETtel/5206e based hardware has leds on latch on CS3. - * No support modem for lines?? - */ -#define NETtel_LEDADDR 0x50000000 - -/*---------------------------------------------------------------------------*/ -#elif defined(CONFIG_M5272) -/* - * NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines. - */ -#define MCFPP_DCD0 0x0080 -#define MCFPP_DCD1 0x0000 /* Port 1 no DCD support */ -#define MCFPP_DTR0 0x0040 -#define MCFPP_DTR1 0x0000 /* Port 1 no DTR support */ - -#ifndef __ASSEMBLY__ -/* - * These functions defined to give quasi generic access to the - * PPIO bits used for DTR/DCD. - */ -static __inline__ unsigned int mcf_getppdata(void) -{ - volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT); - return((unsigned int) *pp); -} - -static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) -{ - volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT); - *pp = (*pp & ~mask) | bits; -} -#endif - -#endif -/*---------------------------------------------------------------------------*/ - -/****************************************************************************/ -#endif /* CONFIG_NETtel */ -/****************************************************************************/ -#endif /* nettel_h */ diff --git a/include/asm-m68knommu/openprom.h b/include/asm-m68knommu/openprom.h deleted file mode 100644 index fdba7953ff9f..000000000000 --- a/include/asm-m68knommu/openprom.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/oplib.h b/include/asm-m68knommu/oplib.h deleted file mode 100644 index ce079dc332d9..000000000000 --- a/include/asm-m68knommu/oplib.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/page.h b/include/asm-m68knommu/page.h deleted file mode 100644 index 3a1ede4544cb..000000000000 --- a/include/asm-m68knommu/page.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _M68KNOMMU_PAGE_H -#define _M68KNOMMU_PAGE_H - -/* PAGE_SHIFT determines the page size */ - -#define PAGE_SHIFT (12) -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#include - -#ifndef __ASSEMBLY__ - -#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -#define free_user_page(page, addr) free_page(addr) - -#define clear_page(page) memset((page), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) - -#define clear_user_page(page, vaddr, pg) clear_page(page) -#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) - -#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ - alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) -#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pmd[16]; } pmd_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct page *pgtable_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((&x)->pmd[0]) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -extern unsigned long memory_start; -extern unsigned long memory_end; - -#endif /* !__ASSEMBLY__ */ - -#include - -#define PAGE_OFFSET (PAGE_OFFSET_RAW) - -#ifndef __ASSEMBLY__ - -#define __pa(vaddr) virt_to_phys((void *)(vaddr)) -#define __va(paddr) phys_to_virt((unsigned long)(paddr)) - -#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) -#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) - -#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) -#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) - -#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn)) -#define page_to_pfn(page) virt_to_pfn(page_to_virt(page)) -#define pfn_valid(pfn) ((pfn) < max_mapnr) - -#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \ - ((void *)(kaddr) < (void *)memory_end)) - -#endif /* __ASSEMBLY__ */ - -#include - -#endif /* _M68KNOMMU_PAGE_H */ diff --git a/include/asm-m68knommu/page_offset.h b/include/asm-m68knommu/page_offset.h deleted file mode 100644 index d4e73e0ba646..000000000000 --- a/include/asm-m68knommu/page_offset.h +++ /dev/null @@ -1,5 +0,0 @@ - - -/* This handles the memory map.. */ -#define PAGE_OFFSET_RAW CONFIG_RAMBASE - diff --git a/include/asm-m68knommu/param.h b/include/asm-m68knommu/param.h deleted file mode 100644 index 6044397adb64..000000000000 --- a/include/asm-m68knommu/param.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _M68KNOMMU_PARAM_H -#define _M68KNOMMU_PARAM_H - -#ifdef __KERNEL__ -#define HZ CONFIG_HZ -#define USER_HZ HZ -#define CLOCKS_PER_SEC (USER_HZ) -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _M68KNOMMU_PARAM_H */ diff --git a/include/asm-m68knommu/pci.h b/include/asm-m68knommu/pci.h deleted file mode 100644 index a13f3cc87451..000000000000 --- a/include/asm-m68knommu/pci.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef M68KNOMMU_PCI_H -#define M68KNOMMU_PCI_H - -#include - -#ifdef CONFIG_COMEMPCI -/* - * These are pretty much arbitary with the CoMEM implementation. - * We have the whole address space to ourselves. - */ -#define PCIBIOS_MIN_IO 0x100 -#define PCIBIOS_MIN_MEM 0x00010000 - -#define pcibios_scan_all_fns(a, b) 0 - -/* - * Return whether the given PCI device DMA address mask can - * be supported properly. For example, if your device can - * only drive the low 24-bits during PCI bus mastering, then - * you would pass 0x00ffffff as the mask to this function. - */ -static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask) -{ - return 1; -} - -#endif /* CONFIG_COMEMPCI */ - -#endif /* M68KNOMMU_PCI_H */ diff --git a/include/asm-m68knommu/percpu.h b/include/asm-m68knommu/percpu.h deleted file mode 100644 index 5de72c327efd..000000000000 --- a/include/asm-m68knommu/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARCH_M68KNOMMU_PERCPU__ -#define __ARCH_M68KNOMMU_PERCPU__ - -#include - -#endif /* __ARCH_M68KNOMMU_PERCPU__ */ diff --git a/include/asm-m68knommu/pgalloc.h b/include/asm-m68knommu/pgalloc.h deleted file mode 100644 index d6352f671ec0..000000000000 --- a/include/asm-m68knommu/pgalloc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _M68KNOMMU_PGALLOC_H -#define _M68KNOMMU_PGALLOC_H - -#include - -#define check_pgt_cache() do { } while (0) - -#endif /* _M68KNOMMU_PGALLOC_H */ diff --git a/include/asm-m68knommu/pgtable.h b/include/asm-m68knommu/pgtable.h deleted file mode 100644 index 46251016e821..000000000000 --- a/include/asm-m68knommu/pgtable.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef _M68KNOMMU_PGTABLE_H -#define _M68KNOMMU_PGTABLE_H - -#include - -/* - * (C) Copyright 2000-2002, Greg Ungerer - */ - -#include -#include -#include -#include - -/* - * Trivial page table functions. - */ -#define pgd_present(pgd) (1) -#define pgd_none(pgd) (0) -#define pgd_bad(pgd) (0) -#define pgd_clear(pgdp) -#define kern_addr_valid(addr) (1) -#define pmd_offset(a, b) ((void *)0) - -#define PAGE_NONE __pgprot(0) -#define PAGE_SHARED __pgprot(0) -#define PAGE_COPY __pgprot(0) -#define PAGE_READONLY __pgprot(0) -#define PAGE_KERNEL __pgprot(0) - -extern void paging_init(void); -#define swapper_pg_dir ((pgd_t *) 0) - -#define __swp_type(x) (0) -#define __swp_offset(x) (0) -#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -static inline int pte_file(pte_t pte) { return 0; } - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -#define ZERO_PAGE(vaddr) (virt_to_page(0)) - -/* - * These would be in other places but having them here reduces the diffs. - */ -extern unsigned int kobjsize(const void *objp); - -/* - * No page table caches to initialise. - */ -#define pgtable_cache_init() do { } while (0) - -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) - -/* - * All 32bit addresses are effectively valid for vmalloc... - * Sort of meaningless for non-VM targets. - */ -#define VMALLOC_START 0 -#define VMALLOC_END 0xffffffff - -#include - -#endif /* _M68KNOMMU_PGTABLE_H */ diff --git a/include/asm-m68knommu/poll.h b/include/asm-m68knommu/poll.h deleted file mode 100644 index ee1b6cb549ca..000000000000 --- a/include/asm-m68knommu/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/posix_types.h b/include/asm-m68knommu/posix_types.h deleted file mode 100644 index 6205fb9392a3..000000000000 --- a/include/asm-m68knommu/posix_types.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/processor.h b/include/asm-m68knommu/processor.h deleted file mode 100644 index 91cba18acdd3..000000000000 --- a/include/asm-m68knommu/processor.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * include/asm-m68knommu/processor.h - * - * Copyright (C) 1995 Hamish Macdonald - */ - -#ifndef __ASM_M68K_PROCESSOR_H -#define __ASM_M68K_PROCESSOR_H - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -#include -#include -#include -#include -#include -#include -#include - -static inline unsigned long rdusp(void) -{ -#ifdef CONFIG_COLDFIRE - extern unsigned int sw_usp; - return(sw_usp); -#else - unsigned long usp; - __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); - return usp; -#endif -} - -static inline void wrusp(unsigned long usp) -{ -#ifdef CONFIG_COLDFIRE - extern unsigned int sw_usp; - sw_usp = usp; -#else - __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); -#endif -} - -/* - * User space process size: 3.75GB. This is hardcoded into a few places, - * so don't change it unless you know what you are doing. - */ -#define TASK_SIZE (0xF0000000UL) - -/* - * This decides where the kernel will search for a free chunk of vm - * space during mmap's. We won't be using it - */ -#define TASK_UNMAPPED_BASE 0 - -/* - * if you change this structure, you must change the code and offsets - * in m68k/machasm.S - */ - -struct thread_struct { - unsigned long ksp; /* kernel stack pointer */ - unsigned long usp; /* user stack pointer */ - unsigned short sr; /* saved status register */ - unsigned short fs; /* saved fs (sfc, dfc) */ - unsigned long crp[2]; /* cpu root pointer */ - unsigned long esp0; /* points to SR of stack frame */ - unsigned long fp[8*3]; - unsigned long fpcntl[3]; /* fp control regs */ - unsigned char fpstate[FPSTATESIZE]; /* floating point state */ -}; - -#define INIT_THREAD { \ - sizeof(init_stack) + (unsigned long) init_stack, 0, \ - PS_S, __KERNEL_DS, \ - {0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \ -} - -/* - * Coldfire stacks need to be re-aligned on trap exit, conventional - * 68k can handle this case cleanly. - */ -#if defined(CONFIG_COLDFIRE) -#define reformat(_regs) do { (_regs)->format = 0x4; } while(0) -#else -#define reformat(_regs) do { } while (0) -#endif - -/* - * Do necessary setup to start up a newly executed thread. - * - * pass the data segment into user programs if it exists, - * it can't hurt anything as far as I can tell - */ -#define start_thread(_regs, _pc, _usp) \ -do { \ - set_fs(USER_DS); /* reads from user space */ \ - (_regs)->pc = (_pc); \ - ((struct switch_stack *)(_regs))[-1].a6 = 0; \ - reformat(_regs); \ - if (current->mm) \ - (_regs)->d5 = current->mm->start_data; \ - (_regs)->sr &= ~0x2000; \ - wrusp(_usp); \ -} while(0) - -/* Forward declaration, a strange C thing */ -struct task_struct; - -/* Free all resources held by a thread. */ -static inline void release_thread(struct task_struct *dead_task) -{ -} - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* - * Free current thread data structures etc.. - */ -static inline void exit_thread(void) -{ -} - -unsigned long thread_saved_pc(struct task_struct *tsk); -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) \ - ({ \ - unsigned long eip = 0; \ - if ((tsk)->thread.esp0 > PAGE_SIZE && \ - (virt_addr_valid((tsk)->thread.esp0))) \ - eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ - eip; }) -#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) - -#define cpu_relax() barrier() - -#endif diff --git a/include/asm-m68knommu/ptrace.h b/include/asm-m68knommu/ptrace.h deleted file mode 100644 index 8c9194b98548..000000000000 --- a/include/asm-m68knommu/ptrace.h +++ /dev/null @@ -1,87 +0,0 @@ -#ifndef _M68K_PTRACE_H -#define _M68K_PTRACE_H - -#define PT_D1 0 -#define PT_D2 1 -#define PT_D3 2 -#define PT_D4 3 -#define PT_D5 4 -#define PT_D6 5 -#define PT_D7 6 -#define PT_A0 7 -#define PT_A1 8 -#define PT_A2 9 -#define PT_A3 10 -#define PT_A4 11 -#define PT_A5 12 -#define PT_A6 13 -#define PT_D0 14 -#define PT_USP 15 -#define PT_ORIG_D0 16 -#define PT_SR 17 -#define PT_PC 18 - -#ifndef __ASSEMBLY__ - -/* this struct defines the way the registers are stored on the - stack during a system call. */ - -struct pt_regs { - long d1; - long d2; - long d3; - long d4; - long d5; - long a0; - long a1; - long a2; - long d0; - long orig_d0; - long stkadj; -#ifdef CONFIG_COLDFIRE - unsigned format : 4; /* frame format specifier */ - unsigned vector : 12; /* vector offset */ - unsigned short sr; - unsigned long pc; -#else - unsigned short sr; - unsigned long pc; - unsigned format : 4; /* frame format specifier */ - unsigned vector : 12; /* vector offset */ -#endif -}; - -/* - * This is the extended stack used by signal handlers and the context - * switcher: it's pushed after the normal "struct pt_regs". - */ -struct switch_stack { - unsigned long d6; - unsigned long d7; - unsigned long a3; - unsigned long a4; - unsigned long a5; - unsigned long a6; - unsigned long retpc; -}; - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 - -#ifdef __KERNEL__ - -#ifndef PS_S -#define PS_S (0x2000) -#define PS_M (0x1000) -#endif - -#define user_mode(regs) (!((regs)->sr & PS_S)) -#define instruction_pointer(regs) ((regs)->pc) -#define profile_pc(regs) instruction_pointer(regs) -extern void show_regs(struct pt_regs *); -#endif /* __KERNEL__ */ -#endif /* __ASSEMBLY__ */ -#endif /* _M68K_PTRACE_H */ diff --git a/include/asm-m68knommu/quicc_simple.h b/include/asm-m68knommu/quicc_simple.h deleted file mode 100644 index c3636932d4bc..000000000000 --- a/include/asm-m68knommu/quicc_simple.h +++ /dev/null @@ -1,52 +0,0 @@ -/*********************************** - * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $ - *********************************** - * - *************************************** - * Simple drivers common header - *************************************** - */ - -#ifndef __SIMPLE_H -#define __SIMPLE_H - -/* #include "quicc.h" */ - -#define GLB_SCC_0 0 -#define GLB_SCC_1 1 -#define GLB_SCC_2 2 -#define GLB_SCC_3 3 - -typedef void (int_routine)(unsigned short interrupt_event); -typedef int_routine *int_routine_ptr; -typedef void *(alloc_routine)(int length); -typedef void (free_routine)(int scc_num, int channel_num, void *buf); -typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length); -typedef int (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd); -typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd); -typedef void (handle_lost_error_routine)(int scc_num, int channel_num); - -/* user defined functions for global errors */ -typedef void (handle_glob_overrun_routine)(int scc_number); -typedef void (handle_glob_underrun_routine)(int scc_number); -typedef void (glob_intr_q_overflow_routine)(int scc_number); - -/* - * General initialization and command routines - */ -void quicc_issue_cmd (unsigned short cmd, int scc_num); -void quicc_init(void); -void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf); -void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf); -void quicc_scc_start(int scc_num); -void quicc_scc_loopback(int scc_num); - -/* Interrupt enable/disable routines for critical pieces of code*/ -unsigned short IntrDis(void); -void IntrEna(unsigned short old_sr); - -/* For debugging */ -void print_rbd(int scc_num); -void print_tbd(int scc_num); - -#endif diff --git a/include/asm-m68knommu/resource.h b/include/asm-m68knommu/resource.h deleted file mode 100644 index 7fa63d5ea576..000000000000 --- a/include/asm-m68knommu/resource.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/rtc.h b/include/asm-m68knommu/rtc.h deleted file mode 100644 index eaf18ec83c8e..000000000000 --- a/include/asm-m68knommu/rtc.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/scatterlist.h b/include/asm-m68knommu/scatterlist.h deleted file mode 100644 index afc4788b0d2c..000000000000 --- a/include/asm-m68knommu/scatterlist.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _M68KNOMMU_SCATTERLIST_H -#define _M68KNOMMU_SCATTERLIST_H - -#include -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; - -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#define ISA_DMA_THRESHOLD (0xffffffff) - -#endif /* !(_M68KNOMMU_SCATTERLIST_H) */ diff --git a/include/asm-m68knommu/sections.h b/include/asm-m68knommu/sections.h deleted file mode 100644 index dd0ecb98ec08..000000000000 --- a/include/asm-m68knommu/sections.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _M68KNOMMU_SECTIONS_H -#define _M68KNOMMU_SECTIONS_H - -/* nothing to see, move along */ -#include - -#endif diff --git a/include/asm-m68knommu/segment.h b/include/asm-m68knommu/segment.h deleted file mode 100644 index 42318ebec7ec..000000000000 --- a/include/asm-m68knommu/segment.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef _M68K_SEGMENT_H -#define _M68K_SEGMENT_H - -/* define constants */ -/* Address spaces (FC0-FC2) */ -#define USER_DATA (1) -#ifndef __USER_DS -#define __USER_DS (USER_DATA) -#endif -#define USER_PROGRAM (2) -#define SUPER_DATA (5) -#ifndef __KERNEL_DS -#define __KERNEL_DS (SUPER_DATA) -#endif -#define SUPER_PROGRAM (6) -#define CPU_SPACE (7) - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) -#define USER_DS MAKE_MM_SEG(__USER_DS) -#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS) - -/* - * Get/set the SFC/DFC registers for MOVES instructions - */ - -static inline mm_segment_t get_fs(void) -{ - return USER_DS; -} - -static inline mm_segment_t get_ds(void) -{ - /* return the supervisor data space code */ - return KERNEL_DS; -} - -static inline void set_fs(mm_segment_t val) -{ -} - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#endif /* __ASSEMBLY__ */ - -#endif /* _M68K_SEGMENT_H */ diff --git a/include/asm-m68knommu/sembuf.h b/include/asm-m68knommu/sembuf.h deleted file mode 100644 index 3a634f9ecf50..000000000000 --- a/include/asm-m68knommu/sembuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/setup.h b/include/asm-m68knommu/setup.h deleted file mode 100644 index fb86bb2a6078..000000000000 --- a/include/asm-m68knommu/setup.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifdef __KERNEL__ - -#include - -/* We have a bigger command line buffer. */ -#undef COMMAND_LINE_SIZE - -#endif /* __KERNEL__ */ - -#define COMMAND_LINE_SIZE 512 diff --git a/include/asm-m68knommu/shm.h b/include/asm-m68knommu/shm.h deleted file mode 100644 index cc8e522d9050..000000000000 --- a/include/asm-m68knommu/shm.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/shmbuf.h b/include/asm-m68knommu/shmbuf.h deleted file mode 100644 index bc34cf8eefce..000000000000 --- a/include/asm-m68knommu/shmbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/shmparam.h b/include/asm-m68knommu/shmparam.h deleted file mode 100644 index d7ee69648ebf..000000000000 --- a/include/asm-m68knommu/shmparam.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/sigcontext.h b/include/asm-m68knommu/sigcontext.h deleted file mode 100644 index 36c293fc133d..000000000000 --- a/include/asm-m68knommu/sigcontext.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H -#define _ASM_M68KNOMMU_SIGCONTEXT_H - -struct sigcontext { - unsigned long sc_mask; /* old sigmask */ - unsigned long sc_usp; /* old user stack pointer */ - unsigned long sc_d0; - unsigned long sc_d1; - unsigned long sc_a0; - unsigned long sc_a1; - unsigned long sc_a5; - unsigned short sc_sr; - unsigned long sc_pc; - unsigned short sc_formatvec; -}; - -#endif diff --git a/include/asm-m68knommu/siginfo.h b/include/asm-m68knommu/siginfo.h deleted file mode 100644 index b18e5f4064ae..000000000000 --- a/include/asm-m68knommu/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68KNOMMU_SIGINFO_H -#define _M68KNOMMU_SIGINFO_H - -#include - -#endif diff --git a/include/asm-m68knommu/signal.h b/include/asm-m68knommu/signal.h deleted file mode 100644 index 216c08be54a0..000000000000 --- a/include/asm-m68knommu/signal.h +++ /dev/null @@ -1,159 +0,0 @@ -#ifndef _M68KNOMMU_SIGNAL_H -#define _M68KNOMMU_SIGNAL_H - -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ - -#include -#undef __HAVE_ARCH_SIG_BITOPS - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -#endif /* _M68KNOMMU_SIGNAL_H */ diff --git a/include/asm-m68knommu/smp.h b/include/asm-m68knommu/smp.h deleted file mode 100644 index 9e9bd7e58922..000000000000 --- a/include/asm-m68knommu/smp.h +++ /dev/null @@ -1 +0,0 @@ -/* nothing required here yet */ diff --git a/include/asm-m68knommu/socket.h b/include/asm-m68knommu/socket.h deleted file mode 100644 index ac5478bf6371..000000000000 --- a/include/asm-m68knommu/socket.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/sockios.h b/include/asm-m68knommu/sockios.h deleted file mode 100644 index dcc6a8900ce2..000000000000 --- a/include/asm-m68knommu/sockios.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/spinlock.h b/include/asm-m68knommu/spinlock.h deleted file mode 100644 index 6bb1f06c4781..000000000000 --- a/include/asm-m68knommu/spinlock.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/stat.h b/include/asm-m68knommu/stat.h deleted file mode 100644 index 3d4b260e7c03..000000000000 --- a/include/asm-m68knommu/stat.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/statfs.h b/include/asm-m68knommu/statfs.h deleted file mode 100644 index 2ce99eaf0970..000000000000 --- a/include/asm-m68knommu/statfs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/string.h b/include/asm-m68knommu/string.h deleted file mode 100644 index af09e17000fc..000000000000 --- a/include/asm-m68knommu/string.h +++ /dev/null @@ -1,126 +0,0 @@ -#ifndef _M68KNOMMU_STRING_H_ -#define _M68KNOMMU_STRING_H_ - -#ifdef __KERNEL__ /* only set these up for kernel code */ - -#include -#include - -#define __HAVE_ARCH_STRCPY -static inline char * strcpy(char * dest,const char *src) -{ - char *xdest = dest; - - __asm__ __volatile__ - ("1:\tmoveb %1@+,%0@+\n\t" - "jne 1b" - : "=a" (dest), "=a" (src) - : "0" (dest), "1" (src) : "memory"); - return xdest; -} - -#define __HAVE_ARCH_STRNCPY -static inline char * strncpy(char *dest, const char *src, size_t n) -{ - char *xdest = dest; - - if (n == 0) - return xdest; - - __asm__ __volatile__ - ("1:\tmoveb %1@+,%0@+\n\t" - "jeq 2f\n\t" - "subql #1,%2\n\t" - "jne 1b\n\t" - "2:" - : "=a" (dest), "=a" (src), "=d" (n) - : "0" (dest), "1" (src), "2" (n) - : "memory"); - return xdest; -} - - -#ifndef CONFIG_COLDFIRE - -#define __HAVE_ARCH_STRCMP -static inline int strcmp(const char * cs,const char * ct) -{ - char __res; - - __asm__ - ("1:\tmoveb %0@+,%2\n\t" /* get *cs */ - "cmpb %1@+,%2\n\t" /* compare a byte */ - "jne 2f\n\t" /* not equal, break out */ - "tstb %2\n\t" /* at end of cs? */ - "jne 1b\n\t" /* no, keep going */ - "jra 3f\n\t" /* strings are equal */ - "2:\tsubb %1@-,%2\n\t" /* *cs - *ct */ - "3:" - : "=a" (cs), "=a" (ct), "=d" (__res) - : "0" (cs), "1" (ct)); - - return __res; -} - -#define __HAVE_ARCH_STRNCMP -static inline int strncmp(const char * cs,const char * ct,size_t count) -{ - char __res; - - if (!count) - return 0; - __asm__ - ("1:\tmovb %0@+,%3\n\t" /* get *cs */ - "cmpb %1@+,%3\n\t" /* compare a byte */ - "jne 3f\n\t" /* not equal, break out */ - "tstb %3\n\t" /* at end of cs? */ - "jeq 4f\n\t" /* yes, all done */ - "subql #1,%2\n\t" /* no, adjust count */ - "jne 1b\n\t" /* more to do, keep going */ - "2:\tmoveq #0,%3\n\t" /* strings are equal */ - "jra 4f\n\t" - "3:\tsubb %1@-,%3\n\t" /* *cs - *ct */ - "4:" - : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res) - : "0" (cs), "1" (ct), "2" (count)); - return __res; -} - -#endif /* CONFIG_COLDFIRE */ - -#define __HAVE_ARCH_MEMSET -extern void * memset(void * s, int c, size_t count); - -#define __HAVE_ARCH_MEMCPY -extern void * memcpy(void *d, const void *s, size_t count); - -#else /* KERNEL */ - -/* - * let user libraries deal with these, - * IMHO the kernel has no place defining these functions for user apps - */ - -#define __HAVE_ARCH_STRCPY 1 -#define __HAVE_ARCH_STRNCPY 1 -#define __HAVE_ARCH_STRCAT 1 -#define __HAVE_ARCH_STRNCAT 1 -#define __HAVE_ARCH_STRCMP 1 -#define __HAVE_ARCH_STRNCMP 1 -#define __HAVE_ARCH_STRNICMP 1 -#define __HAVE_ARCH_STRCHR 1 -#define __HAVE_ARCH_STRRCHR 1 -#define __HAVE_ARCH_STRSTR 1 -#define __HAVE_ARCH_STRLEN 1 -#define __HAVE_ARCH_STRNLEN 1 -#define __HAVE_ARCH_MEMSET 1 -#define __HAVE_ARCH_MEMCPY 1 -#define __HAVE_ARCH_MEMMOVE 1 -#define __HAVE_ARCH_MEMSCAN 1 -#define __HAVE_ARCH_MEMCMP 1 -#define __HAVE_ARCH_MEMCHR 1 -#define __HAVE_ARCH_STRTOK 1 - -#endif /* KERNEL */ - -#endif /* _M68K_STRING_H_ */ diff --git a/include/asm-m68knommu/system.h b/include/asm-m68knommu/system.h deleted file mode 100644 index 40f49de69821..000000000000 --- a/include/asm-m68knommu/system.h +++ /dev/null @@ -1,324 +0,0 @@ -#ifndef _M68KNOMMU_SYSTEM_H -#define _M68KNOMMU_SYSTEM_H - -#include -#include -#include - -/* - * switch_to(n) should switch tasks to task ptr, first checking that - * ptr isn't the current task, in which case it does nothing. This - * also clears the TS-flag if the task we switched to has used the - * math co-processor latest. - */ -/* - * switch_to() saves the extra registers, that are not saved - * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and - * a0-a1. Some of these are used by schedule() and its predecessors - * and so we might get see unexpected behaviors when a task returns - * with unexpected register values. - * - * syscall stores these registers itself and none of them are used - * by syscall after the function in the syscall has been called. - * - * Beware that resume now expects *next to be in d1 and the offset of - * tss to be in a1. This saves a few instructions as we no longer have - * to push them onto the stack and read them back right after. - * - * 02/17/96 - Jes Sorensen (jds@kom.auc.dk) - * - * Changed 96/09/19 by Andreas Schwab - * pass prev in a0, next in a1, offset of tss in d1, and whether - * the mm structures are shared in d2 (to avoid atc flushing). - */ -asmlinkage void resume(void); -#define switch_to(prev,next,last) \ -{ \ - void *_last; \ - __asm__ __volatile__( \ - "movel %1, %%a0\n\t" \ - "movel %2, %%a1\n\t" \ - "jbsr resume\n\t" \ - "movel %%d1, %0\n\t" \ - : "=d" (_last) \ - : "d" (prev), "d" (next) \ - : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1"); \ - (last) = _last; \ -} - -#ifdef CONFIG_COLDFIRE -#define local_irq_enable() __asm__ __volatile__ ( \ - "move %/sr,%%d0\n\t" \ - "andi.l #0xf8ff,%%d0\n\t" \ - "move %%d0,%/sr\n" \ - : /* no outputs */ \ - : \ - : "cc", "%d0", "memory") -#define local_irq_disable() __asm__ __volatile__ ( \ - "move %/sr,%%d0\n\t" \ - "ori.l #0x0700,%%d0\n\t" \ - "move %%d0,%/sr\n" \ - : /* no outputs */ \ - : \ - : "cc", "%d0", "memory") -/* For spinlocks etc */ -#define local_irq_save(x) __asm__ __volatile__ ( \ - "movew %%sr,%0\n\t" \ - "movew #0x0700,%%d0\n\t" \ - "or.l %0,%%d0\n\t" \ - "movew %%d0,%/sr" \ - : "=d" (x) \ - : \ - : "cc", "%d0", "memory") -#else - -/* portable version */ /* FIXME - see entry.h*/ -#define ALLOWINT 0xf8ff - -#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory") -#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory") -#endif - -#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory") -#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory") - -/* For spinlocks etc */ -#ifndef local_irq_save -#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0) -#endif - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - ((flags & 0x0700) == 0x0700); \ -}) - -#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc") - -/* - * Force strict CPU ordering. - * Not really required on m68k... - */ -#define nop() asm volatile ("nop"::) -#define mb() asm volatile ("" : : :"memory") -#define rmb() asm volatile ("" : : :"memory") -#define wmb() asm volatile ("" : : :"memory") -#define set_mb(var, value) ({ (var) = (value); wmb(); }) - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) -#endif - -#define read_barrier_depends() ((void)0) - -#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((volatile struct __xchg_dummy *)(x)) - -#ifndef CONFIG_RMW_INSNS -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - unsigned long tmp, flags; - - local_irq_save(flags); - - switch (size) { - case 1: - __asm__ __volatile__ - ("moveb %2,%0\n\t" - "moveb %1,%2" - : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 2: - __asm__ __volatile__ - ("movew %2,%0\n\t" - "movew %1,%2" - : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 4: - __asm__ __volatile__ - ("movel %2,%0\n\t" - "movel %1,%2" - : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - } - local_irq_restore(flags); - return tmp; -} -#else -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - switch (size) { - case 1: - __asm__ __volatile__ - ("moveb %2,%0\n\t" - "1:\n\t" - "casb %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 2: - __asm__ __volatile__ - ("movew %2,%0\n\t" - "1:\n\t" - "casw %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 4: - __asm__ __volatile__ - ("movel %2,%0\n\t" - "1:\n\t" - "casl %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - } - return x; -} -#endif - -#include - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#ifndef CONFIG_SMP -#include -#endif - -#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \ - defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 ) -#define HARD_RESET_NOW() ({ \ - local_irq_disable(); \ - asm(" \ - moveal #0x10c00000, %a0; \ - moveb #0, 0xFFFFF300; \ - moveal 0(%a0), %sp; \ - moveal 4(%a0), %a0; \ - jmp (%a0); \ - "); \ -}) -#endif - -#ifdef CONFIG_COLDFIRE -#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) -/* - * Need to account for broken early mask of 5272 silicon. So don't - * jump through the original start address. Jump strait into the - * known start of the FLASH code. - */ -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - jmp 0xf0000400; \ - "); \ -}) -#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \ - defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA) -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - moveal #0x10000044, %a0; \ - movel #0xffffffff, (%a0); \ - moveal #0x10000001, %a0; \ - moveb #0x00, (%a0); \ - moveal #0xf0000004, %a0; \ - moveal (%a0), %a0; \ - jmp (%a0); \ - "); \ -}) -#elif defined(CONFIG_M5272) -/* - * Retrieve the boot address in flash using CSBR0 and CSOR0 - * find the reset vector at flash_address + 4 (e.g. 0x400) - * remap it in the flash's current location (e.g. 0xf0000400) - * and jump there. - */ -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %%sr; \ - move.l %0+0x40,%%d0; \ - and.l %0+0x44,%%d0; \ - andi.l #0xfffff000,%%d0; \ - mov.l %%d0,%%a0; \ - or.l 4(%%a0),%%d0; \ - mov.l %%d0,%%a0; \ - jmp (%%a0);" \ - : /* No output */ \ - : "o" (*(char *)MCF_MBAR) ); \ -}) -#elif defined(CONFIG_M528x) -/* - * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR), - * that when set, resets the MCF528x. - */ -#define HARD_RESET_NOW() \ -({ \ - unsigned char volatile *reset; \ - asm("move.w #0x2700, %sr"); \ - reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000)); \ - while(1) \ - *reset |= (0x01 << 7);\ -}) -#elif defined(CONFIG_M523x) -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - movel #0x01000000, %sp; \ - moveal #0x40110000, %a0; \ - moveb #0x80, (%a0); \ - "); \ -}) -#elif defined(CONFIG_M520x) - /* - * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register - * RCR), that when set, resets the MCF5208. - */ -#define HARD_RESET_NOW() \ -({ \ - unsigned char volatile *reset; \ - asm("move.w #0x2700, %sr"); \ - reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000)); \ - while(1) \ - *reset |= 0x80; \ -}) -#else -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - moveal #0x4, %a0; \ - moveal (%a0), %a0; \ - jmp (%a0); \ - "); \ -}) -#endif -#endif -#define arch_align_stack(x) (x) - - -static inline int irqs_disabled_flags(unsigned long flags) -{ - if (flags & 0x0700) - return 0; - else - return 1; -} - -#endif /* _M68KNOMMU_SYSTEM_H */ diff --git a/include/asm-m68knommu/termbits.h b/include/asm-m68knommu/termbits.h deleted file mode 100644 index 05dd6bc27285..000000000000 --- a/include/asm-m68knommu/termbits.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/termios.h b/include/asm-m68knommu/termios.h deleted file mode 100644 index e7337881a985..000000000000 --- a/include/asm-m68knommu/termios.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/thread_info.h b/include/asm-m68knommu/thread_info.h deleted file mode 100644 index 0c9bc095f3f0..000000000000 --- a/include/asm-m68knommu/thread_info.h +++ /dev/null @@ -1,98 +0,0 @@ -/* thread_info.h: m68knommu low-level thread information - * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com) - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#include - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ - -/* - * Size of kernel stack for each process. This must be a power of 2... - */ -#ifdef CONFIG_4KSTACKS -#define THREAD_SIZE_ORDER (0) -#else -#define THREAD_SIZE_ORDER (1) -#endif - -/* - * for asm files, THREAD_SIZE is now generated by asm-offsets.c - */ -#define THREAD_SIZE (PAGE_SIZE< preemptable, <0 => BUG */ - struct restart_block restart_block; -}; - -/* - * macros/functions for gaining access to the thread information structure - */ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - __asm__( - "move.l %%sp, %0 \n\t" - "and.l %1, %0" - : "=&d"(ti) - : "di" (~(THREAD_SIZE-1)) - ); - return ti; -} - -#endif /* __ASSEMBLY__ */ - -#define PREEMPT_ACTIVE 0x4000000 - -/* - * thread information flag bit numbers - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling - TIF_NEED_RESCHED */ -#define TIF_MEMDIE 4 - -/* as above, but as bit values */ -#define _TIF_SYSCALL_TRACE (1< -#define CLOCK_TICK_RATE MCF_CLK -#else -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ -#endif - -typedef unsigned long cycles_t; - -static inline cycles_t get_cycles(void) -{ - return 0; -} - -#endif diff --git a/include/asm-m68knommu/tlb.h b/include/asm-m68knommu/tlb.h deleted file mode 100644 index 77a7c51ca299..000000000000 --- a/include/asm-m68knommu/tlb.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/tlbflush.h b/include/asm-m68knommu/tlbflush.h deleted file mode 100644 index a470cfb803eb..000000000000 --- a/include/asm-m68knommu/tlbflush.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef _M68KNOMMU_TLBFLUSH_H -#define _M68KNOMMU_TLBFLUSH_H - -/* - * Copyright (C) 2000 Lineo, David McCullough - * Copyright (C) 2000-2002, Greg Ungerer - */ - -#include - -/* - * flush all user-space atc entries. - */ -static inline void __flush_tlb(void) -{ - BUG(); -} - -static inline void __flush_tlb_one(unsigned long addr) -{ - BUG(); -} - -#define flush_tlb() __flush_tlb() - -/* - * flush all atc entries (both kernel and user-space entries). - */ -static inline void flush_tlb_all(void) -{ - BUG(); -} - -static inline void flush_tlb_mm(struct mm_struct *mm) -{ - BUG(); -} - -static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) -{ - BUG(); -} - -static inline void flush_tlb_range(struct mm_struct *mm, - unsigned long start, unsigned long end) -{ - BUG(); -} - -static inline void flush_tlb_kernel_page(unsigned long addr) -{ - BUG(); -} - -#endif /* _M68KNOMMU_TLBFLUSH_H */ diff --git a/include/asm-m68knommu/topology.h b/include/asm-m68knommu/topology.h deleted file mode 100644 index ca173e9f26ff..000000000000 --- a/include/asm-m68knommu/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_TOPOLOGY_H -#define _ASM_M68K_TOPOLOGY_H - -#include - -#endif /* _ASM_M68K_TOPOLOGY_H */ diff --git a/include/asm-m68knommu/traps.h b/include/asm-m68knommu/traps.h deleted file mode 100644 index d0671e5f8e29..000000000000 --- a/include/asm-m68knommu/traps.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - * linux/include/asm/traps.h - * - * Copyright (C) 1993 Hamish Macdonald - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#ifndef _M68KNOMMU_TRAPS_H -#define _M68KNOMMU_TRAPS_H - -#ifndef __ASSEMBLY__ - -typedef void (*e_vector)(void); - -extern e_vector vectors[]; -extern void init_vectors(void); -extern void enable_vector(unsigned int irq); -extern void disable_vector(unsigned int irq); -extern void ack_vector(unsigned int irq); - -#endif - -#define VEC_BUSERR (2) -#define VEC_ADDRERR (3) -#define VEC_ILLEGAL (4) -#define VEC_ZERODIV (5) -#define VEC_CHK (6) -#define VEC_TRAP (7) -#define VEC_PRIV (8) -#define VEC_TRACE (9) -#define VEC_LINE10 (10) -#define VEC_LINE11 (11) -#define VEC_RESV1 (12) -#define VEC_COPROC (13) -#define VEC_FORMAT (14) -#define VEC_UNINT (15) -#define VEC_SPUR (24) -#define VEC_INT1 (25) -#define VEC_INT2 (26) -#define VEC_INT3 (27) -#define VEC_INT4 (28) -#define VEC_INT5 (29) -#define VEC_INT6 (30) -#define VEC_INT7 (31) -#define VEC_SYS (32) -#define VEC_TRAP1 (33) -#define VEC_TRAP2 (34) -#define VEC_TRAP3 (35) -#define VEC_TRAP4 (36) -#define VEC_TRAP5 (37) -#define VEC_TRAP6 (38) -#define VEC_TRAP7 (39) -#define VEC_TRAP8 (40) -#define VEC_TRAP9 (41) -#define VEC_TRAP10 (42) -#define VEC_TRAP11 (43) -#define VEC_TRAP12 (44) -#define VEC_TRAP13 (45) -#define VEC_TRAP14 (46) -#define VEC_TRAP15 (47) -#define VEC_FPBRUC (48) -#define VEC_FPIR (49) -#define VEC_FPDIVZ (50) -#define VEC_FPUNDER (51) -#define VEC_FPOE (52) -#define VEC_FPOVER (53) -#define VEC_FPNAN (54) -#define VEC_FPUNSUP (55) -#define VEC_UNIMPEA (60) -#define VEC_UNIMPII (61) -#define VEC_USER (64) - -#define VECOFF(vec) ((vec)<<2) - -#ifndef __ASSEMBLY__ - -/* Status register bits */ -#define PS_T (0x8000) -#define PS_S (0x2000) -#define PS_M (0x1000) -#define PS_C (0x0001) - -/* structure for stack frames */ - -struct frame { - struct pt_regs ptregs; - union { - struct { - unsigned long iaddr; /* instruction address */ - } fmt2; - struct { - unsigned long effaddr; /* effective address */ - } fmt3; - struct { - unsigned long effaddr; /* effective address */ - unsigned long pc; /* pc of faulted instr */ - } fmt4; - struct { - unsigned long effaddr; /* effective address */ - unsigned short ssw; /* special status word */ - unsigned short wb3s; /* write back 3 status */ - unsigned short wb2s; /* write back 2 status */ - unsigned short wb1s; /* write back 1 status */ - unsigned long faddr; /* fault address */ - unsigned long wb3a; /* write back 3 address */ - unsigned long wb3d; /* write back 3 data */ - unsigned long wb2a; /* write back 2 address */ - unsigned long wb2d; /* write back 2 data */ - unsigned long wb1a; /* write back 1 address */ - unsigned long wb1dpd0; /* write back 1 data/push data 0*/ - unsigned long pd1; /* push data 1*/ - unsigned long pd2; /* push data 2*/ - unsigned long pd3; /* push data 3*/ - } fmt7; - struct { - unsigned long iaddr; /* instruction address */ - unsigned short int1[4]; /* internal registers */ - } fmt9; - struct { - unsigned short int1; - unsigned short ssw; /* special status word */ - unsigned short isc; /* instruction stage c */ - unsigned short isb; /* instruction stage b */ - unsigned long daddr; /* data cycle fault address */ - unsigned short int2[2]; - unsigned long dobuf; /* data cycle output buffer */ - unsigned short int3[2]; - } fmta; - struct { - unsigned short int1; - unsigned short ssw; /* special status word */ - unsigned short isc; /* instruction stage c */ - unsigned short isb; /* instruction stage b */ - unsigned long daddr; /* data cycle fault address */ - unsigned short int2[2]; - unsigned long dobuf; /* data cycle output buffer */ - unsigned short int3[4]; - unsigned long baddr; /* stage B address */ - unsigned short int4[2]; - unsigned long dibuf; /* data cycle input buffer */ - unsigned short int5[3]; - unsigned ver : 4; /* stack frame version # */ - unsigned int6:12; - unsigned short int7[18]; - } fmtb; - } un; -}; - -#endif /* __ASSEMBLY__ */ - -#endif /* _M68KNOMMU_TRAPS_H */ diff --git a/include/asm-m68knommu/types.h b/include/asm-m68knommu/types.h deleted file mode 100644 index 031238c2d180..000000000000 --- a/include/asm-m68knommu/types.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68knommu/uaccess.h b/include/asm-m68knommu/uaccess.h deleted file mode 100644 index 68bbe9b312f1..000000000000 --- a/include/asm-m68knommu/uaccess.h +++ /dev/null @@ -1,181 +0,0 @@ -#ifndef __M68KNOMMU_UACCESS_H -#define __M68KNOMMU_UACCESS_H - -/* - * User space memory access functions - */ -#include -#include -#include - -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -#define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size)) - -/* - * It is not enough to just have access_ok check for a real RAM address. - * This would disallow the case of code/ro-data running XIP in flash/rom. - * Ideally we would check the possible flash ranges too, but that is - * currently not so easy. - */ -static inline int _access_ok(unsigned long addr, unsigned long size) -{ - return 1; -} - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); - - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - */ - -#define put_user(x, ptr) \ -({ \ - int __pu_err = 0; \ - typeof(*(ptr)) __pu_val = (x); \ - switch (sizeof (*(ptr))) { \ - case 1: \ - __put_user_asm(__pu_err, __pu_val, ptr, b); \ - break; \ - case 2: \ - __put_user_asm(__pu_err, __pu_val, ptr, w); \ - break; \ - case 4: \ - __put_user_asm(__pu_err, __pu_val, ptr, l); \ - break; \ - case 8: \ - memcpy(ptr, &__pu_val, sizeof (*(ptr))); \ - break; \ - default: \ - __pu_err = __put_user_bad(); \ - break; \ - } \ - __pu_err; \ -}) -#define __put_user(x, ptr) put_user(x, ptr) - -extern int __put_user_bad(void); - -/* - * Tell gcc we read from memory instead of writing: this is because - * we do not write to any memory gcc knows about, so there are no - * aliasing issues. - */ - -#define __ptr(x) ((unsigned long *)(x)) - -#define __put_user_asm(err,x,ptr,bwl) \ - __asm__ ("move" #bwl " %0,%1" \ - : /* no outputs */ \ - :"d" (x),"m" (*__ptr(ptr)) : "memory") - -#define get_user(x, ptr) \ -({ \ - int __gu_err = 0; \ - typeof(x) __gu_val = 0; \ - switch (sizeof(*(ptr))) { \ - case 1: \ - __get_user_asm(__gu_err, __gu_val, ptr, b, "=d"); \ - break; \ - case 2: \ - __get_user_asm(__gu_err, __gu_val, ptr, w, "=r"); \ - break; \ - case 4: \ - __get_user_asm(__gu_err, __gu_val, ptr, l, "=r"); \ - break; \ - case 8: \ - memcpy((void *) &__gu_val, ptr, sizeof (*(ptr))); \ - break; \ - default: \ - __gu_val = 0; \ - __gu_err = __get_user_bad(); \ - break; \ - } \ - (x) = (typeof(*(ptr))) __gu_val; \ - __gu_err; \ -}) -#define __get_user(x, ptr) get_user(x, ptr) - -extern int __get_user_bad(void); - -#define __get_user_asm(err,x,ptr,bwl,reg) \ - __asm__ ("move" #bwl " %1,%0" \ - : "=d" (x) \ - : "m" (*__ptr(ptr))) - -#define copy_from_user(to, from, n) (memcpy(to, from, n), 0) -#define copy_to_user(to, from, n) (memcpy(to, from, n), 0) - -#define __copy_from_user(to, from, n) copy_from_user(to, from, n) -#define __copy_to_user(to, from, n) copy_to_user(to, from, n) -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; }) - -#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; }) - -/* - * Copy a null terminated string from userspace. - */ - -static inline long -strncpy_from_user(char *dst, const char *src, long count) -{ - char *tmp; - strncpy(dst, src, count); - for (tmp = dst; *tmp && count > 0; tmp++, count--) - ; - return(tmp - dst); /* DAVIDM should we count a NUL ? check getname */ -} - -/* - * Return the size of a string (including the ending 0) - * - * Return 0 on exception, a value greater than N if too long - */ -static inline long strnlen_user(const char *src, long n) -{ - return(strlen(src) + 1); /* DAVIDM make safer */ -} - -#define strlen_user(str) strnlen_user(str, 32767) - -/* - * Zero Userspace - */ - -static inline unsigned long -__clear_user(void *to, unsigned long n) -{ - memset(to, 0, n); - return 0; -} - -#define clear_user(to,n) __clear_user(to,n) - -#endif /* _M68KNOMMU_UACCESS_H */ diff --git a/include/asm-m68knommu/ucontext.h b/include/asm-m68knommu/ucontext.h deleted file mode 100644 index 713a27f901cd..000000000000 --- a/include/asm-m68knommu/ucontext.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef _M68KNOMMU_UCONTEXT_H -#define _M68KNOMMU_UCONTEXT_H - -typedef int greg_t; -#define NGREG 18 -typedef greg_t gregset_t[NGREG]; - -typedef struct fpregset { - int f_pcr; - int f_psr; - int f_fpiaddr; - int f_fpregs[8][3]; -} fpregset_t; - -struct mcontext { - int version; - gregset_t gregs; - fpregset_t fpregs; -}; - -#define MCONTEXT_VERSION 2 - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct mcontext uc_mcontext; - unsigned long uc_filler[80]; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif diff --git a/include/asm-m68knommu/unaligned.h b/include/asm-m68knommu/unaligned.h deleted file mode 100644 index eb1ea4cb9a59..000000000000 --- a/include/asm-m68knommu/unaligned.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASM_M68KNOMMU_UNALIGNED_H -#define _ASM_M68KNOMMU_UNALIGNED_H - - -#ifdef CONFIG_COLDFIRE -#include -#include -#include - -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be - -#else -/* - * The m68k can do unaligned accesses itself. - */ -#include -#include - -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be - -#endif - -#endif /* _ASM_M68KNOMMU_UNALIGNED_H */ diff --git a/include/asm-m68knommu/unistd.h b/include/asm-m68knommu/unistd.h deleted file mode 100644 index 4ba98b9c5d79..000000000000 --- a/include/asm-m68knommu/unistd.h +++ /dev/null @@ -1,366 +0,0 @@ -#ifndef _ASM_M68K_UNISTD_H_ -#define _ASM_M68K_UNISTD_H_ - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_chown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl /* 110 */ not supported -#define __NR_vhangup 111 -#define __NR_idle /* 112 */ Obsolete -#define __NR_vm86 /* 113 */ not supported -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_cacheflush 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_getpagesize 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_lchown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_getpmsg 188 /* some people actually want streams */ -#define __NR_putpmsg 189 /* some people actually want streams */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_chown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_lchown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_getdents64 220 -#define __NR_gettid 221 -#define __NR_tkill 222 -#define __NR_setxattr 223 -#define __NR_lsetxattr 224 -#define __NR_fsetxattr 225 -#define __NR_getxattr 226 -#define __NR_lgetxattr 227 -#define __NR_fgetxattr 228 -#define __NR_listxattr 229 -#define __NR_llistxattr 230 -#define __NR_flistxattr 231 -#define __NR_removexattr 232 -#define __NR_lremovexattr 233 -#define __NR_fremovexattr 234 -#define __NR_futex 235 -#define __NR_sendfile64 236 -#define __NR_mincore 237 -#define __NR_madvise 238 -#define __NR_fcntl64 239 -#define __NR_readahead 240 -#define __NR_io_setup 241 -#define __NR_io_destroy 242 -#define __NR_io_getevents 243 -#define __NR_io_submit 244 -#define __NR_io_cancel 245 -#define __NR_fadvise64 246 -#define __NR_exit_group 247 -#define __NR_lookup_dcookie 248 -#define __NR_epoll_create 249 -#define __NR_epoll_ctl 250 -#define __NR_epoll_wait 251 -#define __NR_remap_file_pages 252 -#define __NR_set_tid_address 253 -#define __NR_timer_create 254 -#define __NR_timer_settime 255 -#define __NR_timer_gettime 256 -#define __NR_timer_getoverrun 257 -#define __NR_timer_delete 258 -#define __NR_clock_settime 259 -#define __NR_clock_gettime 260 -#define __NR_clock_getres 261 -#define __NR_clock_nanosleep 262 -#define __NR_statfs64 263 -#define __NR_fstatfs64 264 -#define __NR_tgkill 265 -#define __NR_utimes 266 -#define __NR_fadvise64_64 267 -#define __NR_mbind 268 -#define __NR_get_mempolicy 269 -#define __NR_set_mempolicy 270 -#define __NR_mq_open 271 -#define __NR_mq_unlink 272 -#define __NR_mq_timedsend 273 -#define __NR_mq_timedreceive 274 -#define __NR_mq_notify 275 -#define __NR_mq_getsetattr 276 -#define __NR_waitid 277 -#define __NR_vserver 278 -#define __NR_add_key 279 -#define __NR_request_key 280 -#define __NR_keyctl 281 -#define __NR_ioprio_set 282 -#define __NR_ioprio_get 283 -#define __NR_inotify_init 284 -#define __NR_inotify_add_watch 285 -#define __NR_inotify_rm_watch 286 -#define __NR_migrate_pages 287 -#define __NR_openat 288 -#define __NR_mkdirat 289 -#define __NR_mknodat 290 -#define __NR_fchownat 291 -#define __NR_futimesat 292 -#define __NR_fstatat64 293 -#define __NR_unlinkat 294 -#define __NR_renameat 295 -#define __NR_linkat 296 -#define __NR_symlinkat 297 -#define __NR_readlinkat 298 -#define __NR_fchmodat 299 -#define __NR_faccessat 300 -#define __NR_pselect6 301 -#define __NR_ppoll 302 -#define __NR_unshare 303 -#define __NR_set_robust_list 304 -#define __NR_get_robust_list 305 -#define __NR_splice 306 -#define __NR_sync_file_range 307 -#define __NR_tee 308 -#define __NR_vmsplice 309 -#define __NR_move_pages 310 -#define __NR_sched_setaffinity 311 -#define __NR_sched_getaffinity 312 -#define __NR_kexec_load 313 -#define __NR_getcpu 314 -#define __NR_epoll_pwait 315 -#define __NR_utimensat 316 -#define __NR_signalfd 317 -#define __NR_timerfd_create 318 -#define __NR_eventfd 319 -#define __NR_fallocate 320 -#define __NR_timerfd_settime 321 -#define __NR_timerfd_gettime 322 - -#ifdef __KERNEL__ - -#define NR_syscalls 323 - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") - -#endif /* __KERNEL__ */ -#endif /* _ASM_M68K_UNISTD_H_ */ diff --git a/include/asm-m68knommu/user.h b/include/asm-m68knommu/user.h deleted file mode 100644 index a5a555b761c4..000000000000 --- a/include/asm-m68knommu/user.h +++ /dev/null @@ -1 +0,0 @@ -#include -- cgit v1.2.3 From 6a4c4ad2f0aa331324649579649c5d9064893079 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Wed, 6 Aug 2008 16:14:43 +0200 Subject: myri10ge: update firmware headers Update myri10ge firmware headers. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge_mcp.h | 52 +++++++++++++++++++++++--- drivers/net/myri10ge/myri10ge_mcp_gen_header.h | 2 +- 2 files changed, 48 insertions(+), 6 deletions(-) diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h index fdbeeee07372..993721090777 100644 --- a/drivers/net/myri10ge/myri10ge_mcp.h +++ b/drivers/net/myri10ge/myri10ge_mcp.h @@ -101,6 +101,8 @@ struct mcp_kreq_ether_recv { #define MXGEFW_ETH_SEND_3 0x2c0000 #define MXGEFW_ETH_RECV_SMALL 0x300000 #define MXGEFW_ETH_RECV_BIG 0x340000 +#define MXGEFW_ETH_SEND_GO 0x380000 +#define MXGEFW_ETH_SEND_STOP 0x3C0000 #define MXGEFW_ETH_SEND(n) (0x200000 + (((n) & 0x03) * 0x40000)) #define MXGEFW_ETH_SEND_OFFSET(n) (MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4) @@ -120,6 +122,11 @@ enum myri10ge_mcp_cmd_type { * MXGEFW_CMD_RESET is issued */ MXGEFW_CMD_SET_INTRQ_DMA, + /* data0 = LSW of the host address + * data1 = MSW of the host address + * data2 = slice number if multiple slices are used + */ + MXGEFW_CMD_SET_BIG_BUFFER_SIZE, /* in bytes, power of 2 */ MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, /* in bytes */ @@ -129,6 +136,8 @@ enum myri10ge_mcp_cmd_type { MXGEFW_CMD_GET_SEND_OFFSET, MXGEFW_CMD_GET_SMALL_RX_OFFSET, MXGEFW_CMD_GET_BIG_RX_OFFSET, + /* data0 = slice number if multiple slices are used */ + MXGEFW_CMD_GET_IRQ_ACK_OFFSET, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET, @@ -200,7 +209,12 @@ enum myri10ge_mcp_cmd_type { MXGEFW_CMD_SET_STATS_DMA_V2, /* data0, data1 = bus addr, * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows - * adding new stuff to mcp_irq_data without changing the ABI */ + * adding new stuff to mcp_irq_data without changing the ABI + * + * If multiple slices are used, data2 contains both the size of the + * structure (in the lower 16 bits) and the slice number + * (in the upper 16 bits). + */ MXGEFW_CMD_UNALIGNED_TEST, /* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned @@ -222,13 +236,18 @@ enum myri10ge_mcp_cmd_type { MXGEFW_CMD_GET_MAX_RSS_QUEUES, MXGEFW_CMD_ENABLE_RSS_QUEUES, /* data0 = number of slices n (0, 1, ..., n-1) to enable - * data1 = interrupt mode. - * 0=share one INTx/MSI, 1=use one MSI-X per queue. + * data1 = interrupt mode | use of multiple transmit queues. + * 0=share one INTx/MSI. + * 1=use one MSI-X per queue. * If all queues share one interrupt, the driver must have set * RSS_SHARED_INTERRUPT_DMA before enabling queues. + * 2=enable both receive and send queues. + * Without this bit set, only one send queue (slice 0's send queue) + * is enabled. The receive queues are always enabled. */ -#define MXGEFW_SLICE_INTR_MODE_SHARED 0 -#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 1 +#define MXGEFW_SLICE_INTR_MODE_SHARED 0x0 +#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 0x1 +#define MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES 0x2 MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET, MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA, @@ -250,10 +269,13 @@ enum myri10ge_mcp_cmd_type { * 2: TCP_IPV4 (required by RSS) * 3: IPV4 | TCP_IPV4 (required by RSS) * 4: source port + * 5: source port + destination port */ #define MXGEFW_RSS_HASH_TYPE_IPV4 0x1 #define MXGEFW_RSS_HASH_TYPE_TCP_IPV4 0x2 #define MXGEFW_RSS_HASH_TYPE_SRC_PORT 0x4 +#define MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT 0x5 +#define MXGEFW_RSS_HASH_TYPE_MAX 0x5 MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE, /* Return data = the max. size of the entire headers of a IPv6 TSO packet. @@ -329,6 +351,20 @@ enum myri10ge_mcp_cmd_type { MXGEFW_CMD_GET_DCA_OFFSET, /* offset of dca control for WDMAs */ + + /* VMWare NetQueue commands */ + MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE, + MXGEFW_CMD_NETQ_ADD_FILTER, + /* data0 = filter_id << 16 | queue << 8 | type */ + /* data1 = MS4 of MAC Addr */ + /* data2 = LS2_MAC << 16 | VLAN_tag */ + MXGEFW_CMD_NETQ_DEL_FILTER, + /* data0 = filter_id */ + MXGEFW_CMD_NETQ_QUERY1, + MXGEFW_CMD_NETQ_QUERY2, + MXGEFW_CMD_NETQ_QUERY3, + MXGEFW_CMD_NETQ_QUERY4, + }; enum myri10ge_mcp_cmd_status { @@ -381,4 +417,10 @@ struct mcp_irq_data { u8 valid; }; +/* definitions for NETQ filter type */ +#define MXGEFW_NETQ_FILTERTYPE_NONE 0 +#define MXGEFW_NETQ_FILTERTYPE_MACADDR 1 +#define MXGEFW_NETQ_FILTERTYPE_VLAN 2 +#define MXGEFW_NETQ_FILTERTYPE_VLANMACADDR 3 + #endif /* __MYRI10GE_MCP_H__ */ diff --git a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h index 07d65c2cbb24..a8662ea8079a 100644 --- a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h +++ b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h @@ -35,7 +35,7 @@ struct mcp_gen_header { unsigned char mcp_index; unsigned char disable_rabbit; unsigned char unaligned_tlp; - unsigned char pad1; + unsigned char pcie_link_algo; unsigned counters_addr; unsigned copy_block_info; /* for small mcps loaded with "lload -d" */ unsigned short handoff_id_major; /* must be equal */ -- cgit v1.2.3 From 77970ea50b8e7ee9733a6589bf61ed9c02f20ee9 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Wed, 6 Aug 2008 16:15:23 +0200 Subject: myri10ge: set 64bits consistent DMA mask Set 64bits consistent DMA mask since it improves performance in some cases. No need to check the return value since it is not required for the driver to work. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 3ab0e5289f7a..f1de38f8b742 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -3699,6 +3699,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev_err(&pdev->dev, "Error %d setting DMA mask\n", status); goto abort_with_netdev; } + (void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd), &mgp->cmd_bus, GFP_KERNEL); if (mgp->cmd == NULL) -- cgit v1.2.3 From 44defeb3f6f98ea9bb48a2fe6eb9004e9e1a49a1 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Mon, 4 Aug 2008 17:20:41 -0700 Subject: e1000e: convert ndev_ printks to something smaller The ndev_* printk's are too lenghty and we don't need to specify the adapter/netdev struct at all, making this a lot more readable. Signed-off-by: Jeff Kirsher Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/e1000.h | 27 ++++---- drivers/net/e1000e/ethtool.c | 44 +++++-------- drivers/net/e1000e/netdev.c | 154 +++++++++++++++++++------------------------ drivers/net/e1000e/param.c | 31 ++++----- 4 files changed, 112 insertions(+), 144 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 4a4f62e002b2..d3ed1ed63292 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -41,24 +41,25 @@ struct e1000_info; -#define ndev_printk(level, netdev, format, arg...) \ - printk(level "%s: " format, (netdev)->name, ## arg) +#define e_printk(level, adapter, format, arg...) \ + printk(level "%s: %s: " format, pci_name(adapter->pdev), \ + adapter->netdev->name, ## arg) #ifdef DEBUG -#define ndev_dbg(netdev, format, arg...) \ - ndev_printk(KERN_DEBUG , netdev, format, ## arg) +#define e_dbg(format, arg...) \ + e_printk(KERN_DEBUG , adapter, format, ## arg) #else -#define ndev_dbg(netdev, format, arg...) do { (void)(netdev); } while (0) +#define e_dbg(format, arg...) do { (void)(adapter); } while (0) #endif -#define ndev_err(netdev, format, arg...) \ - ndev_printk(KERN_ERR , netdev, format, ## arg) -#define ndev_info(netdev, format, arg...) \ - ndev_printk(KERN_INFO , netdev, format, ## arg) -#define ndev_warn(netdev, format, arg...) \ - ndev_printk(KERN_WARNING , netdev, format, ## arg) -#define ndev_notice(netdev, format, arg...) \ - ndev_printk(KERN_NOTICE , netdev, format, ## arg) +#define e_err(format, arg...) \ + e_printk(KERN_ERR, adapter, format, ## arg) +#define e_info(format, arg...) \ + e_printk(KERN_INFO, adapter, format, ## arg) +#define e_warn(format, arg...) \ + e_printk(KERN_WARNING, adapter, format, ## arg) +#define e_notice(format, arg...) \ + e_printk(KERN_NOTICE, adapter, format, ## arg) /* Tx/Rx descriptor defines */ diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 9350564065e7..cf9679f2b7c4 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -189,8 +189,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) /* Fiber NICs only allow 1000 gbps Full duplex */ if ((adapter->hw.phy.media_type == e1000_media_type_fiber) && spddplx != (SPEED_1000 + DUPLEX_FULL)) { - ndev_err(adapter->netdev, "Unsupported Speed/Duplex " - "configuration\n"); + e_err("Unsupported Speed/Duplex configuration\n"); return -EINVAL; } @@ -213,8 +212,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) break; case SPEED_1000 + DUPLEX_HALF: /* not supported */ default: - ndev_err(adapter->netdev, "Unsupported Speed/Duplex " - "configuration\n"); + e_err("Unsupported Speed/Duplex configuration\n"); return -EINVAL; } return 0; @@ -231,8 +229,8 @@ static int e1000_set_settings(struct net_device *netdev, * cannot be changed */ if (e1000_check_reset_block(hw)) { - ndev_err(netdev, "Cannot change link " - "characteristics when SoL/IDER is active.\n"); + e_err("Cannot change link characteristics when SoL/IDER is " + "active.\n"); return -EINVAL; } @@ -380,8 +378,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data) netdev->features &= ~NETIF_F_TSO6; } - ndev_info(netdev, "TSO is %s\n", - data ? "Enabled" : "Disabled"); + e_info("TSO is %s\n", data ? "Enabled" : "Disabled"); adapter->flags |= FLAG_TSO_FORCE; return 0; } @@ -722,10 +719,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, (test[pat] & write)); val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset); if (val != (test[pat] & write & mask)) { - ndev_err(adapter->netdev, "pattern test reg %04X " - "failed: got 0x%08X expected 0x%08X\n", - reg + offset, - val, (test[pat] & write & mask)); + e_err("pattern test reg %04X failed: got 0x%08X " + "expected 0x%08X\n", reg + offset, val, + (test[pat] & write & mask)); *data = reg; return 1; } @@ -740,9 +736,8 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, __ew32(&adapter->hw, reg, write & mask); val = __er32(&adapter->hw, reg); if ((write & mask) != (val & mask)) { - ndev_err(adapter->netdev, "set/check reg %04X test failed: " - "got 0x%08X expected 0x%08X\n", reg, (val & mask), - (write & mask)); + e_err("set/check reg %04X test failed: got 0x%08X " + "expected 0x%08X\n", reg, (val & mask), (write & mask)); *data = reg; return 1; } @@ -766,7 +761,6 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) { struct e1000_hw *hw = &adapter->hw; struct e1000_mac_info *mac = &adapter->hw.mac; - struct net_device *netdev = adapter->netdev; u32 value; u32 before; u32 after; @@ -799,8 +793,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) ew32(STATUS, toggle); after = er32(STATUS) & toggle; if (value != after) { - ndev_err(netdev, "failed STATUS register test got: " - "0x%08X expected: 0x%08X\n", after, value); + e_err("failed STATUS register test got: 0x%08X expected: " + "0x%08X\n", after, value); *data = 1; return 1; } @@ -903,8 +897,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) *data = 1; return -1; } - ndev_info(netdev, "testing %s interrupt\n", - (shared_int ? "shared" : "unshared")); + e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared")); /* Disable all the interrupts */ ew32(IMC, 0xFFFFFFFF); @@ -1526,8 +1519,7 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data) * sessions are active */ if (e1000_check_reset_block(&adapter->hw)) { - ndev_err(adapter->netdev, "Cannot do PHY loopback test " - "when SoL/IDER is active.\n"); + e_err("Cannot do PHY loopback test when SoL/IDER is active.\n"); *data = 0; goto out; } @@ -1612,7 +1604,7 @@ static void e1000_diag_test(struct net_device *netdev, forced_speed_duplex = adapter->hw.mac.forced_speed_duplex; autoneg = adapter->hw.mac.autoneg; - ndev_info(netdev, "offline testing starting\n"); + e_info("offline testing starting\n"); /* * Link test performed before hardware reset so autoneg doesn't @@ -1658,7 +1650,7 @@ static void e1000_diag_test(struct net_device *netdev, if (if_running) dev_open(netdev); } else { - ndev_info(netdev, "online testing starting\n"); + e_info("online testing starting\n"); /* Online tests */ if (e1000_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -1694,8 +1686,8 @@ static void e1000_get_wol(struct net_device *netdev, wol->supported &= ~WAKE_UCAST; if (adapter->wol & E1000_WUFC_EX) - ndev_err(netdev, "Interface does not support " - "directed (unicast) frame wake-up packets\n"); + e_err("Interface does not support directed (unicast) " + "frame wake-up packets\n"); } if (adapter->wol & E1000_WUFC_EX) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index d13677899767..378335f2b237 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -484,8 +484,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, * packet, also make sure the frame isn't just CRC only */ if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) { /* All receives must fit into a single buffer */ - ndev_dbg(netdev, "%s: Receive packet consumed " - "multiple buffers\n", netdev->name); + e_dbg("%s: Receive packet consumed multiple buffers\n", + netdev->name); /* recycle */ buffer_info->skb = skb; goto next_desc; @@ -576,28 +576,26 @@ static void e1000_print_tx_hang(struct e1000_adapter *adapter) unsigned int i = tx_ring->next_to_clean; unsigned int eop = tx_ring->buffer_info[i].next_to_watch; struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop); - struct net_device *netdev = adapter->netdev; /* detected Tx unit hang */ - ndev_err(netdev, - "Detected Tx Unit Hang:\n" - " TDH <%x>\n" - " TDT <%x>\n" - " next_to_use <%x>\n" - " next_to_clean <%x>\n" - "buffer_info[next_to_clean]:\n" - " time_stamp <%lx>\n" - " next_to_watch <%x>\n" - " jiffies <%lx>\n" - " next_to_watch.status <%x>\n", - readl(adapter->hw.hw_addr + tx_ring->head), - readl(adapter->hw.hw_addr + tx_ring->tail), - tx_ring->next_to_use, - tx_ring->next_to_clean, - tx_ring->buffer_info[eop].time_stamp, - eop, - jiffies, - eop_desc->upper.fields.status); + e_err("Detected Tx Unit Hang:\n" + " TDH <%x>\n" + " TDT <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + "buffer_info[next_to_clean]:\n" + " time_stamp <%lx>\n" + " next_to_watch <%x>\n" + " jiffies <%lx>\n" + " next_to_watch.status <%x>\n", + readl(adapter->hw.hw_addr + tx_ring->head), + readl(adapter->hw.hw_addr + tx_ring->tail), + tx_ring->next_to_use, + tx_ring->next_to_clean, + tx_ring->buffer_info[eop].time_stamp, + eop, + jiffies, + eop_desc->upper.fields.status); } /** @@ -747,8 +745,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, buffer_info->dma = 0; if (!(staterr & E1000_RXD_STAT_EOP)) { - ndev_dbg(netdev, "%s: Packet Split buffers didn't pick " - "up the full packet\n", netdev->name); + e_dbg("%s: Packet Split buffers didn't pick up the " + "full packet\n", netdev->name); dev_kfree_skb_irq(skb); goto next_desc; } @@ -761,8 +759,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, length = le16_to_cpu(rx_desc->wb.middle.length0); if (!length) { - ndev_dbg(netdev, "%s: Last part of the packet spanning" - " multiple descriptors\n", netdev->name); + e_dbg("%s: Last part of the packet spanning multiple " + "descriptors\n", netdev->name); dev_kfree_skb_irq(skb); goto next_desc; } @@ -1011,7 +1009,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, /* eth type trans needs skb->data to point to something */ if (!pskb_may_pull(skb, ETH_HLEN)) { - ndev_err(netdev, "pskb_may_pull failed.\n"); + e_err("pskb_may_pull failed.\n"); dev_kfree_skb(skb); goto next_desc; } @@ -1251,10 +1249,8 @@ static int e1000_request_irq(struct e1000_adapter *adapter) err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name, netdev); if (err) { - ndev_err(netdev, - "Unable to allocate %s interrupt (return: %d)\n", - adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx", - err); + e_err("Unable to allocate %s interrupt (return: %d)\n", + adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx", err); if (adapter->flags & FLAG_MSI_ENABLED) pci_disable_msi(adapter->pdev); } @@ -1395,8 +1391,7 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter) return 0; err: vfree(tx_ring->buffer_info); - ndev_err(adapter->netdev, - "Unable to allocate memory for the transmit descriptor ring\n"); + e_err("Unable to allocate memory for the transmit descriptor ring\n"); return err; } @@ -1450,8 +1445,7 @@ err_pages: } err: vfree(rx_ring->buffer_info); - ndev_err(adapter->netdev, - "Unable to allocate memory for the transmit descriptor ring\n"); + e_err("Unable to allocate memory for the transmit descriptor ring\n"); return err; } @@ -2456,7 +2450,7 @@ void e1000e_reset(struct e1000_adapter *adapter) ew32(WUC, 0); if (mac->ops.init_hw(hw)) - ndev_err(adapter->netdev, "Hardware Error\n"); + e_err("Hardware Error\n"); e1000_update_mng_vlan(adapter); @@ -2591,7 +2585,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) return 0; err: - ndev_err(netdev, "Unable to allocate memory for queues\n"); + e_err("Unable to allocate memory for queues\n"); kfree(adapter->rx_ring); kfree(adapter->tx_ring); return -ENOMEM; @@ -2917,8 +2911,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000); ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus); if (ret_val) - ndev_warn(adapter->netdev, - "Error reading PHY register\n"); + e_warn("Error reading PHY register\n"); } else { /* * Do not read PHY registers if link is not up @@ -2943,18 +2936,16 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) static void e1000_print_link_info(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; u32 ctrl = er32(CTRL); - ndev_info(netdev, - "Link is Up %d Mbps %s, Flow Control: %s\n", - adapter->link_speed, - (adapter->link_duplex == FULL_DUPLEX) ? - "Full Duplex" : "Half Duplex", - ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ? - "RX/TX" : - ((ctrl & E1000_CTRL_RFCE) ? "RX" : - ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" ))); + e_info("Link is Up %d Mbps %s, Flow Control: %s\n", + adapter->link_speed, + (adapter->link_duplex == FULL_DUPLEX) ? + "Full Duplex" : "Half Duplex", + ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ? + "RX/TX" : + ((ctrl & E1000_CTRL_RFCE) ? "RX" : + ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" ))); } static bool e1000_has_link(struct e1000_adapter *adapter) @@ -2994,8 +2985,7 @@ static bool e1000_has_link(struct e1000_adapter *adapter) if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) && (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { /* See e1000_kmrn_lock_loss_workaround_ich8lan() */ - ndev_info(adapter->netdev, - "Gigabit has been disabled, downgrading speed\n"); + e_info("Gigabit has been disabled, downgrading speed\n"); } return link_active; @@ -3096,8 +3086,7 @@ static void e1000_watchdog_task(struct work_struct *work) switch (adapter->link_speed) { case SPEED_10: case SPEED_100: - ndev_info(netdev, - "10/100 speed: disabling TSO\n"); + e_info("10/100 speed: disabling TSO\n"); netdev->features &= ~NETIF_F_TSO; netdev->features &= ~NETIF_F_TSO6; break; @@ -3130,7 +3119,7 @@ static void e1000_watchdog_task(struct work_struct *work) if (netif_carrier_ok(netdev)) { adapter->link_speed = 0; adapter->link_duplex = 0; - ndev_info(netdev, "Link is Down\n"); + e_info("Link is Down\n"); netif_carrier_off(netdev); netif_tx_stop_all_queues(netdev); if (!test_bit(__E1000_DOWN, &adapter->state)) @@ -3604,8 +3593,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) pull_size = min((unsigned int)4, skb->data_len); if (!__pskb_pull_tail(skb, pull_size)) { - ndev_err(netdev, - "__pskb_pull_tail failed.\n"); + e_err("__pskb_pull_tail failed.\n"); dev_kfree_skb_any(skb); return NETDEV_TX_OK; } @@ -3737,25 +3725,25 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { - ndev_err(netdev, "Invalid MTU setting\n"); + e_err("Invalid MTU setting\n"); return -EINVAL; } /* Jumbo frame size limits */ if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) { if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { - ndev_err(netdev, "Jumbo Frames not supported.\n"); + e_err("Jumbo Frames not supported.\n"); return -EINVAL; } if (adapter->hw.phy.type == e1000_phy_ife) { - ndev_err(netdev, "Jumbo Frames not supported.\n"); + e_err("Jumbo Frames not supported.\n"); return -EINVAL; } } #define MAX_STD_JUMBO_FRAME_SIZE 9234 if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { - ndev_err(netdev, "MTU > 9216 not supported.\n"); + e_err("MTU > 9216 not supported.\n"); return -EINVAL; } @@ -3792,8 +3780,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; - ndev_info(netdev, "changing MTU from %d to %d\n", - netdev->mtu, new_mtu); + e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); netdev->mtu = new_mtu; if (netif_running(netdev)) @@ -4175,22 +4162,19 @@ static void e1000_print_device_info(struct e1000_adapter *adapter) u32 pba_num; /* print bus type/speed/width info */ - ndev_info(netdev, "(PCI Express:2.5GB/s:%s) " - "%02x:%02x:%02x:%02x:%02x:%02x\n", - /* bus width */ - ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : - "Width x1"), - /* MAC address */ - netdev->dev_addr[0], netdev->dev_addr[1], - netdev->dev_addr[2], netdev->dev_addr[3], - netdev->dev_addr[4], netdev->dev_addr[5]); - ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n", - (hw->phy.type == e1000_phy_ife) - ? "10/100" : "1000"); + e_info("(PCI Express:2.5GB/s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n", + /* bus width */ + ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : + "Width x1"), + /* MAC address */ + netdev->dev_addr[0], netdev->dev_addr[1], + netdev->dev_addr[2], netdev->dev_addr[3], + netdev->dev_addr[4], netdev->dev_addr[5]); + e_info("Intel(R) PRO/%s Network Connection\n", + (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000"); e1000e_read_pba_num(hw, &pba_num); - ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n", - hw->mac.type, hw->phy.type, - (pba_num >> 8), (pba_num & 0xff)); + e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n", + hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff)); } /** @@ -4366,8 +4350,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, } if (e1000_check_reset_block(&adapter->hw)) - ndev_info(netdev, - "PHY reset is blocked due to SOL/IDER session.\n"); + e_info("PHY reset is blocked due to SOL/IDER session.\n"); netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM | @@ -4411,7 +4394,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (e1000_validate_nvm_checksum(&adapter->hw) >= 0) break; if (i == 2) { - ndev_err(netdev, "The NVM Checksum Is Not Valid\n"); + e_err("The NVM Checksum Is Not Valid\n"); err = -EIO; goto err_eeprom; } @@ -4419,17 +4402,16 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* copy the MAC address out of the NVM */ if (e1000e_read_mac_addr(&adapter->hw)) - ndev_err(netdev, "NVM Read Error while reading MAC address\n"); + e_err("NVM Read Error while reading MAC address\n"); memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); if (!is_valid_ether_addr(netdev->perm_addr)) { - ndev_err(netdev, "Invalid MAC Address: " - "%02x:%02x:%02x:%02x:%02x:%02x\n", - netdev->perm_addr[0], netdev->perm_addr[1], - netdev->perm_addr[2], netdev->perm_addr[3], - netdev->perm_addr[4], netdev->perm_addr[5]); + e_err("Invalid MAC Address: %02x:%02x:%02x:%02x:%02x:%02x\n", + netdev->perm_addr[0], netdev->perm_addr[1], + netdev->perm_addr[2], netdev->perm_addr[3], + netdev->perm_addr[4], netdev->perm_addr[5]); err = -EIO; goto err_eeprom; } diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index a66b92efcf80..8effc3107f9a 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -27,6 +27,7 @@ *******************************************************************************/ #include +#include #include "e1000.h" @@ -162,17 +163,16 @@ static int __devinit e1000_validate_option(unsigned int *value, case enable_option: switch (*value) { case OPTION_ENABLED: - ndev_info(adapter->netdev, "%s Enabled\n", opt->name); + e_info("%s Enabled\n", opt->name); return 0; case OPTION_DISABLED: - ndev_info(adapter->netdev, "%s Disabled\n", opt->name); + e_info("%s Disabled\n", opt->name); return 0; } break; case range_option: if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { - ndev_info(adapter->netdev, - "%s set to %i\n", opt->name, *value); + e_info("%s set to %i\n", opt->name, *value); return 0; } break; @@ -184,8 +184,7 @@ static int __devinit e1000_validate_option(unsigned int *value, ent = &opt->arg.l.p[i]; if (*value == ent->i) { if (ent->str[0] != '\0') - ndev_info(adapter->netdev, "%s\n", - ent->str); + e_info("%s\n", ent->str); return 0; } } @@ -195,8 +194,8 @@ static int __devinit e1000_validate_option(unsigned int *value, BUG(); } - ndev_info(adapter->netdev, "Invalid %s value specified (%i) %s\n", - opt->name, *value, opt->err); + e_info("Invalid %s value specified (%i) %s\n", opt->name, *value, + opt->err); *value = opt->def; return -1; } @@ -213,13 +212,11 @@ static int __devinit e1000_validate_option(unsigned int *value, void __devinit e1000e_check_options(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; int bd = adapter->bd_number; if (bd >= E1000_MAX_NIC) { - ndev_notice(netdev, - "Warning: no configuration for board #%i\n", bd); - ndev_notice(netdev, "Using defaults for all values\n"); + e_notice("Warning: no configuration for board #%i\n", bd); + e_notice("Using defaults for all values\n"); } { /* Transmit Interrupt Delay */ @@ -313,19 +310,15 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) adapter->itr = InterruptThrottleRate[bd]; switch (adapter->itr) { case 0: - ndev_info(netdev, "%s turned off\n", - opt.name); + e_info("%s turned off\n", opt.name); break; case 1: - ndev_info(netdev, - "%s set to dynamic mode\n", - opt.name); + e_info("%s set to dynamic mode\n", opt.name); adapter->itr_setting = adapter->itr; adapter->itr = 20000; break; case 3: - ndev_info(netdev, - "%s set to dynamic conservative mode\n", + e_info("%s set to dynamic conservative mode\n", opt.name); adapter->itr_setting = adapter->itr; adapter->itr = 20000; -- cgit v1.2.3 From 10aa4c0447c308738dade244e23036f2fcbfb140 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Mon, 4 Aug 2008 17:21:20 -0700 Subject: e1000e: perform basic 82573 EEPROM checks for known issues 82573 EEPROMs have been shipped out with known issues. While most people will never see the issues some people do and we know how to address them. Warn the user if we find one of these EEPROM issues. Signed-off-by: Auke Kok Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/e1000e/netdev.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 378335f2b237..589e54246ad2 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4177,6 +4177,28 @@ static void e1000_print_device_info(struct e1000_adapter *adapter) hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff)); } +static void e1000_eeprom_checks(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int ret_val; + u16 buf = 0; + + if (hw->mac.type != e1000_82573) + return; + + ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf); + if (!(le16_to_cpu(buf) & (1 << 0))) { + /* Deep Smart Power Down (DSPD) */ + e_warn("Warning: detected DSPD enabled in EEPROM\n"); + } + + ret_val = e1000_read_nvm(hw, NVM_INIT_3GIO_3, 1, &buf); + if (le16_to_cpu(buf) & (3 << 2)) { + /* ASPM enable */ + e_warn("Warning: detected ASPM enabled in EEPROM\n"); + } +} + /** * e1000e_is_need_ioport - determine if an adapter needs ioport resources or not * @pdev: PCI device information struct @@ -4400,6 +4422,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, } } + e1000_eeprom_checks(adapter); + /* copy the MAC address out of the NVM */ if (e1000e_read_mac_addr(&adapter->hw)) e_err("NVM Read Error while reading MAC address\n"); -- cgit v1.2.3 From c43bc57e5d72932b5e64bc5e4e7741bedbcaaf5f Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Mon, 4 Aug 2008 17:21:40 -0700 Subject: e1000e: fix drv load issues a few people seem to have problems maintaining gigabit link and it was root caused to an interaction between the managability firmware on the host and the driver, not communicating. The form of communication they use is the drv_load bit. Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/e1000e/netdev.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 589e54246ad2..18f076c01eea 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2444,7 +2444,7 @@ void e1000e_reset(struct e1000_adapter *adapter) * For parts with AMT enabled, let the firmware know * that the network interface is in control */ - if ((adapter->flags & FLAG_HAS_AMT) && e1000e_check_mng_mode(hw)) + if (adapter->flags & FLAG_HAS_AMT) e1000_get_hw_control(adapter); ew32(WUC, 0); @@ -2634,8 +2634,7 @@ static int e1000_open(struct net_device *netdev) * If AMT is enabled, let the firmware know that the network * interface is now open */ - if ((adapter->flags & FLAG_HAS_AMT) && - e1000e_check_mng_mode(&adapter->hw)) + if (adapter->flags & FLAG_HAS_AMT) e1000_get_hw_control(adapter); /* @@ -2713,8 +2712,7 @@ static int e1000_close(struct net_device *netdev) * If AMT is enabled, let the firmware know that the network * interface is now closed */ - if ((adapter->flags & FLAG_HAS_AMT) && - e1000e_check_mng_mode(&adapter->hw)) + if (adapter->flags & FLAG_HAS_AMT) e1000_release_hw_control(adapter); return 0; @@ -4030,7 +4028,7 @@ static int e1000_resume(struct pci_dev *pdev) * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ - if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw)) + if (!(adapter->flags & FLAG_HAS_AMT)) e1000_get_hw_control(adapter); return 0; @@ -4149,8 +4147,7 @@ static void e1000_io_resume(struct pci_dev *pdev) * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ - if (!(adapter->flags & FLAG_HAS_AMT) || - !e1000e_check_mng_mode(&adapter->hw)) + if (!(adapter->flags & FLAG_HAS_AMT)) e1000_get_hw_control(adapter); } @@ -4505,8 +4502,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ - if (!(adapter->flags & FLAG_HAS_AMT) || - !e1000e_check_mng_mode(&adapter->hw)) + if (!(adapter->flags & FLAG_HAS_AMT)) e1000_get_hw_control(adapter); /* tell the stack to leave us alone until e1000_open() is called */ @@ -4523,19 +4519,19 @@ static int __devinit e1000_probe(struct pci_dev *pdev, return 0; err_register: -err_hw_init: - e1000_release_hw_control(adapter); + if (!(adapter->flags & FLAG_HAS_AMT)) + e1000_release_hw_control(adapter); err_eeprom: if (!e1000_check_reset_block(&adapter->hw)) e1000_phy_hw_reset(&adapter->hw); +err_hw_init: - if (adapter->hw.flash_address) - iounmap(adapter->hw.flash_address); - -err_flashmap: kfree(adapter->tx_ring); kfree(adapter->rx_ring); err_sw_init: + if (adapter->hw.flash_address) + iounmap(adapter->hw.flash_address); +err_flashmap: iounmap(adapter->hw.hw_addr); err_ioremap: free_netdev(netdev); -- cgit v1.2.3 From f0f422e5735ba9f48039aa7dd4c9daa16b996c2c Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Mon, 4 Aug 2008 17:21:53 -0700 Subject: e1000e: remove inapplicable test for ioport There are currently no devices supported by the e1000e driver which need ioport resources, remove the test for it and all unnecessary code associated with it (struct e1000_adapter elements, local variables, etc.) Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/e1000e/e1000.h | 4 ---- drivers/net/e1000e/netdev.c | 48 ++++++++++----------------------------------- 2 files changed, 10 insertions(+), 42 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index d3ed1ed63292..cf57050d99d8 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -284,10 +284,6 @@ struct e1000_adapter { unsigned long led_status; unsigned int flags; - - /* for ioport free */ - int bars; - int need_ioport; }; struct e1000_info { diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 18f076c01eea..05b0b2f9c54b 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -3991,10 +3991,7 @@ static int e1000_resume(struct pci_dev *pdev) pci_restore_state(pdev); e1000e_disable_l1aspm(pdev); - if (adapter->need_ioport) - err = pci_enable_device(pdev); - else - err = pci_enable_device_mem(pdev); + err = pci_enable_device_mem(pdev); if (err) { dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n"); @@ -4096,10 +4093,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) int err; e1000e_disable_l1aspm(pdev); - if (adapter->need_ioport) - err = pci_enable_device(pdev); - else - err = pci_enable_device_mem(pdev); + err = pci_enable_device_mem(pdev); if (err) { dev_err(&pdev->dev, "Cannot re-enable PCI device after reset.\n"); @@ -4196,21 +4190,6 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter) } } -/** - * e1000e_is_need_ioport - determine if an adapter needs ioport resources or not - * @pdev: PCI device information struct - * - * Returns true if an adapters needs ioport resources - **/ -static int e1000e_is_need_ioport(struct pci_dev *pdev) -{ - switch (pdev->device) { - /* Currently there are no adapters that need ioport resources */ - default: - return false; - } -} - /** * e1000_probe - Device Initialization Routine * @pdev: PCI device information struct @@ -4236,19 +4215,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev, int i, err, pci_using_dac; u16 eeprom_data = 0; u16 eeprom_apme_mask = E1000_EEPROM_APME; - int bars, need_ioport; e1000e_disable_l1aspm(pdev); - /* do not allocate ioport bars when not needed */ - need_ioport = e1000e_is_need_ioport(pdev); - if (need_ioport) { - bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO); - err = pci_enable_device(pdev); - } else { - bars = pci_select_bars(pdev, IORESOURCE_MEM); - err = pci_enable_device_mem(pdev); - } + err = pci_enable_device_mem(pdev); if (err) return err; @@ -4271,7 +4241,9 @@ static int __devinit e1000_probe(struct pci_dev *pdev, } } - err = pci_request_selected_regions(pdev, bars, e1000e_driver_name); + err = pci_request_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM), + e1000e_driver_name); if (err) goto err_pci_reg; @@ -4296,8 +4268,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->hw.adapter = adapter; adapter->hw.mac.type = ei->mac; adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; - adapter->bars = bars; - adapter->need_ioport = need_ioport; mmio_start = pci_resource_start(pdev, 0); mmio_len = pci_resource_len(pdev, 0); @@ -4536,7 +4506,8 @@ err_flashmap: err_ioremap: free_netdev(netdev); err_alloc_etherdev: - pci_release_selected_regions(pdev, bars); + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); err_pci_reg: err_dma: pci_disable_device(pdev); @@ -4584,7 +4555,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev) iounmap(adapter->hw.hw_addr); if (adapter->hw.flash_address) iounmap(adapter->hw.flash_address); - pci_release_selected_regions(pdev, adapter->bars); + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); free_netdev(netdev); -- cgit v1.2.3 From c2ac3ef35c44195ca2b9c29275c7c6830eb2d9aa Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Mon, 4 Aug 2008 19:05:10 -0500 Subject: atl1: deal with hardware rx checksum bug The L1 hardware contains a bug that flags a fragmented IP packet as having an incorrect TCP/UDP checksum, even though the packet is perfectly valid and its checksum is correct. There's no way to distinguish between one of these good packets and a packet that actually contains a TCP/UDP checksum error, so all we can do is allow the packet to be handed up to the higher layers and let it be sorted out there. Add a comment describing this condition and remove the code that currently fails to handle what may or may not be a checksum error. Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index f12e3d12474b..e6a7bb79d4df 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -1790,6 +1790,17 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter, { struct pci_dev *pdev = adapter->pdev; + /* + * The L1 hardware contains a bug that erroneously sets the + * PACKET_FLAG_ERR and ERR_FLAG_L4_CHKSUM bits whenever a + * fragmented IP packet is received, even though the packet + * is perfectly valid and its checksum is correct. There's + * no way to distinguish between one of these good packets + * and a packet that actually contains a TCP/UDP checksum + * error, so all we can do is allow it to be handed up to + * the higher layers and let it be sorted out there. + */ + skb->ip_summed = CHECKSUM_NONE; if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { @@ -1816,14 +1827,6 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter, return; } - /* IPv4, but hardware thinks its checksum is wrong */ - if (netif_msg_rx_err(adapter)) - dev_printk(KERN_DEBUG, &pdev->dev, - "hw csum wrong, pkt_flag:%x, err_flag:%x\n", - rrd->pkt_flg, rrd->err_flg); - skb->ip_summed = CHECKSUM_COMPLETE; - skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum); - adapter->hw_csum_err++; return; } -- cgit v1.2.3 From 106ef2fef3778f4af2e0f796a108cc19c6114264 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 4 Aug 2008 14:59:37 -0700 Subject: igb: fix comments The internal name was used in comments, replaced with silicon part number. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/e1000_82575.c | 2 +- drivers/net/igb/igb_main.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index e098f234770f..f3d7be0427fe 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -1243,7 +1243,7 @@ out: u32 igb_translate_register_82576(u32 reg) { /* - * Some of the Kawela registers are located at different + * Some of the 82576 registers are located at different * offsets than they are in older adapters. * Despite the difference in location, the registers * function in the same manner. diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index b602c4dd0d14..f23a0487bf13 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -311,7 +311,7 @@ static void igb_assign_vector(struct igb_adapter *adapter, int rx_queue, array_wr32(E1000_MSIXBM(0), msix_vector, msixbm); break; case e1000_82576: - /* Kawela uses a table-based method for assigning vectors. + /* The 82576 uses a table-based method for assigning vectors. Each queue has a single entry in the table to which we write a vector number along with a "valid" bit. Sadly, the layout of the table is somewhat counterintuitive. */ -- cgit v1.2.3 From c743a87eabc50110ba5e473e707079c9b429779a Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 4 Aug 2008 14:59:46 -0700 Subject: igb: fix null pointer dereference seen with fiber NICs With a fiber or serdes NIC installed the driver was causing a null pointer dereference on driver unload. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/igb_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index f23a0487bf13..cfed2b07f3a4 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1372,7 +1372,8 @@ static void __devexit igb_remove(struct pci_dev *pdev) unregister_netdev(netdev); - if (!igb_check_reset_block(&adapter->hw)) + if (adapter->hw.phy.ops.reset_phy && + !igb_check_reset_block(&adapter->hw)) adapter->hw.phy.ops.reset_phy(&adapter->hw); igb_remove_device(&adapter->hw); -- cgit v1.2.3 From 726c09e7b6b7b9f9015ae7ce803ba4cd67121d67 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 4 Aug 2008 14:59:56 -0700 Subject: igb: fixes 82576 serdes init to correctly support manual flow control changes This patch changes the PCS configuration for serdes so that the flow control options change be set via the ethtool -A option. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/e1000_82575.c | 6 ++++++ drivers/net/igb/e1000_defines.h | 1 + 2 files changed, 7 insertions(+) diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index f3d7be0427fe..cd75a2bc24a0 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -1136,6 +1136,12 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw) E1000_PCS_LCTL_FORCE_LINK; /* Force Link */ hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg); } + + if (hw->mac.type == e1000_82576) { + reg |= E1000_PCS_LCTL_FORCE_FCTRL; + igb_force_mac_fc(hw); + } + wr32(E1000_PCS_LCTL, reg); return 0; diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h index afdba3c9073c..ce700689fb57 100644 --- a/drivers/net/igb/e1000_defines.h +++ b/drivers/net/igb/e1000_defines.h @@ -257,6 +257,7 @@ #define E1000_PCS_LCTL_FDV_FULL 8 #define E1000_PCS_LCTL_FSD 0x10 #define E1000_PCS_LCTL_FORCE_LINK 0x20 +#define E1000_PCS_LCTL_FORCE_FCTRL 0x80 #define E1000_PCS_LCTL_AN_ENABLE 0x10000 #define E1000_PCS_LCTL_AN_RESTART 0x20000 #define E1000_PCS_LCTL_AN_TIMEOUT 0x40000 -- cgit v1.2.3 From 549bdd84dce242e15a9d7b42787ae481ba29f458 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 4 Aug 2008 15:00:06 -0700 Subject: igb: correct issue of set_mta member of mac.ops not being populated The igb_mta_set function was not being correctly used Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/e1000_82575.c | 2 +- drivers/net/igb/e1000_hw.h | 1 - drivers/net/igb/e1000_mac.c | 2 +- drivers/net/igb/e1000_mac.h | 1 + 4 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index cd75a2bc24a0..76f9f866f8c7 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -850,7 +850,7 @@ void igb_update_mc_addr_list_82575(struct e1000_hw *hw, for (; mc_addr_count > 0; mc_addr_count--) { hash_value = igb_hash_mc_addr(hw, mc_addr_list); hw_dbg("Hash value = 0x%03X\n", hash_value); - hw->mac.ops.mta_set(hw, hash_value); + igb_mta_set(hw, hash_value); mc_addr_list += ETH_ALEN; } } diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h index 19fa4ee96f2e..a65ccc3095c3 100644 --- a/drivers/net/igb/e1000_hw.h +++ b/drivers/net/igb/e1000_hw.h @@ -420,7 +420,6 @@ struct e1000_mac_operations { void (*rar_set)(struct e1000_hw *, u8 *, u32); s32 (*read_mac_addr)(struct e1000_hw *); s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *); - void (*mta_set)(struct e1000_hw *, u32); }; struct e1000_phy_operations { diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index 20408aa1f916..9b0f0afdaeb8 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -271,7 +271,7 @@ void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) * current value is read, the new bit is OR'd in and the new value is * written back into the register. **/ -static void igb_mta_set(struct e1000_hw *hw, u32 hash_value) +void igb_mta_set(struct e1000_hw *hw, u32 hash_value) { u32 hash_bit, hash_reg, mta; diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h index dc2f8cce15e7..c2a9365ee040 100644 --- a/drivers/net/igb/e1000_mac.h +++ b/drivers/net/igb/e1000_mac.h @@ -63,6 +63,7 @@ void igb_clear_hw_cntrs_base(struct e1000_hw *hw); void igb_clear_vfta(struct e1000_hw *hw); void igb_config_collision_dist(struct e1000_hw *hw); void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count); +void igb_mta_set(struct e1000_hw *hw, u32 hash_value); void igb_put_hw_semaphore(struct e1000_hw *hw); void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index); s32 igb_check_alt_mac_addr(struct e1000_hw *hw); -- cgit v1.2.3 From ec796b4ffc947f74e9e85198d1648e9556300c55 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 4 Aug 2008 15:00:18 -0700 Subject: igb: remove three redundant functions left in the code Three functions were left in the code that are no longer used. I am removing these functions just to keep the code clean. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/e1000_82575.c | 64 --------------------------------- drivers/net/igb/e1000_82575.h | 1 - drivers/net/igb/e1000_mac.c | 82 ------------------------------------------- drivers/net/igb/e1000_mac.h | 4 --- drivers/net/igb/e1000_regs.h | 3 -- 5 files changed, 154 deletions(-) diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index 76f9f866f8c7..bb823acc7443 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -1237,70 +1237,6 @@ out: return ret_val; } -/** - * igb_translate_register_82576 - Translate the proper register offset - * @reg: e1000 register to be read - * - * Registers in 82576 are located in different offsets than other adapters - * even though they function in the same manner. This function takes in - * the name of the register to read and returns the correct offset for - * 82576 silicon. - **/ -u32 igb_translate_register_82576(u32 reg) -{ - /* - * Some of the 82576 registers are located at different - * offsets than they are in older adapters. - * Despite the difference in location, the registers - * function in the same manner. - */ - switch (reg) { - case E1000_TDBAL(0): - reg = 0x0E000; - break; - case E1000_TDBAH(0): - reg = 0x0E004; - break; - case E1000_TDLEN(0): - reg = 0x0E008; - break; - case E1000_TDH(0): - reg = 0x0E010; - break; - case E1000_TDT(0): - reg = 0x0E018; - break; - case E1000_TXDCTL(0): - reg = 0x0E028; - break; - case E1000_RDBAL(0): - reg = 0x0C000; - break; - case E1000_RDBAH(0): - reg = 0x0C004; - break; - case E1000_RDLEN(0): - reg = 0x0C008; - break; - case E1000_RDH(0): - reg = 0x0C010; - break; - case E1000_RDT(0): - reg = 0x0C018; - break; - case E1000_RXDCTL(0): - reg = 0x0C028; - break; - case E1000_SRRCTL(0): - reg = 0x0C00C; - break; - default: - break; - } - - return reg; -} - /** * igb_reset_init_script_82575 - Inits HW defaults after reset * @hw: pointer to the HW structure diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h index 2f848e578a24..c1928b5efe1f 100644 --- a/drivers/net/igb/e1000_82575.h +++ b/drivers/net/igb/e1000_82575.h @@ -28,7 +28,6 @@ #ifndef _E1000_82575_H_ #define _E1000_82575_H_ -u32 igb_translate_register_82576(u32 reg); void igb_update_mc_addr_list_82575(struct e1000_hw*, u8*, u32, u32, u32); extern void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw); extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw); diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index 9b0f0afdaeb8..e18747c70bec 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -143,34 +143,6 @@ void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) wrfl(); } -/** - * igb_init_rx_addrs - Initialize receive address's - * @hw: pointer to the HW structure - * @rar_count: receive address registers - * - * Setups the receive address registers by setting the base receive address - * register to the devices MAC address and clearing all the other receive - * address registers to 0. - **/ -void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) -{ - u32 i; - - /* Setup the receive address */ - hw_dbg("Programming MAC Address into RAR[0]\n"); - - hw->mac.ops.rar_set(hw, hw->mac.addr, 0); - - /* Zero out the other (rar_entry_count - 1) receive addresses */ - hw_dbg("Clearing RAR[1-%u]\n", rar_count-1); - for (i = 1; i < rar_count; i++) { - array_wr32(E1000_RA, (i << 1), 0); - wrfl(); - array_wr32(E1000_RA, ((i << 1) + 1), 0); - wrfl(); - } -} - /** * igb_check_alt_mac_addr - Check for alternate MAC addr * @hw: pointer to the HW structure @@ -296,60 +268,6 @@ void igb_mta_set(struct e1000_hw *hw, u32 hash_value) wrfl(); } -/** - * igb_update_mc_addr_list - Update Multicast addresses - * @hw: pointer to the HW structure - * @mc_addr_list: array of multicast addresses to program - * @mc_addr_count: number of multicast addresses to program - * @rar_used_count: the first RAR register free to program - * @rar_count: total number of supported Receive Address Registers - * - * Updates the Receive Address Registers and Multicast Table Array. - * The caller must have a packed mc_addr_list of multicast addresses. - * The parameter rar_count will usually be hw->mac.rar_entry_count - * unless there are workarounds that change this. - **/ -void igb_update_mc_addr_list(struct e1000_hw *hw, - u8 *mc_addr_list, u32 mc_addr_count, - u32 rar_used_count, u32 rar_count) -{ - u32 hash_value; - u32 i; - - /* - * Load the first set of multicast addresses into the exact - * filters (RAR). If there are not enough to fill the RAR - * array, clear the filters. - */ - for (i = rar_used_count; i < rar_count; i++) { - if (mc_addr_count) { - hw->mac.ops.rar_set(hw, mc_addr_list, i); - mc_addr_count--; - mc_addr_list += ETH_ALEN; - } else { - array_wr32(E1000_RA, i << 1, 0); - wrfl(); - array_wr32(E1000_RA, (i << 1) + 1, 0); - wrfl(); - } - } - - /* Clear the old settings from the MTA */ - hw_dbg("Clearing MTA\n"); - for (i = 0; i < hw->mac.mta_reg_count; i++) { - array_wr32(E1000_MTA, i, 0); - wrfl(); - } - - /* Load any remaining multicast addresses into the hash table. */ - for (; mc_addr_count > 0; mc_addr_count--) { - hash_value = igb_hash_mc_addr(hw, mc_addr_list); - hw_dbg("Hash value = 0x%03X\n", hash_value); - igb_mta_set(hw, hash_value); - mc_addr_list += ETH_ALEN; - } -} - /** * igb_hash_mc_addr - Generate a multicast hash value * @hw: pointer to the HW structure diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h index c2a9365ee040..cbee6af7d912 100644 --- a/drivers/net/igb/e1000_mac.h +++ b/drivers/net/igb/e1000_mac.h @@ -51,9 +51,6 @@ s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex); s32 igb_id_led_init(struct e1000_hw *hw); s32 igb_led_off(struct e1000_hw *hw); -void igb_update_mc_addr_list(struct e1000_hw *hw, - u8 *mc_addr_list, u32 mc_addr_count, - u32 rar_used_count, u32 rar_count); s32 igb_setup_link(struct e1000_hw *hw); s32 igb_validate_mdi_setting(struct e1000_hw *hw); s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, @@ -62,7 +59,6 @@ s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, void igb_clear_hw_cntrs_base(struct e1000_hw *hw); void igb_clear_vfta(struct e1000_hw *hw); void igb_config_collision_dist(struct e1000_hw *hw); -void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count); void igb_mta_set(struct e1000_hw *hw, u32 hash_value); void igb_put_hw_semaphore(struct e1000_hw *hw); void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index); diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h index b95093d24c09..95523af26056 100644 --- a/drivers/net/igb/e1000_regs.h +++ b/drivers/net/igb/e1000_regs.h @@ -262,9 +262,6 @@ #define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) #define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */ -#define E1000_REGISTER(a, reg) (((a)->mac.type < e1000_82576) \ - ? reg : e1000_translate_register_82576(reg)) - #define wr32(reg, value) (writel(value, hw->hw_addr + reg)) #define rd32(reg) (readl(hw->hw_addr + reg)) #define wrfl() ((void)rd32(E1000_STATUS)) -- cgit v1.2.3 From a6ef5e9d7dd6f3de4f88b68c390f0f0d7072944c Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 4 Aug 2008 15:00:27 -0700 Subject: igb: remove igb_init_managability as it is deprecated igb_init_managability does not actually perform any function as the two registers it attempts to write are both read only on the host. This patch removes the function and all references to it from the driver. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/igb_main.c | 25 ------------------------- 1 file changed, 25 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index cfed2b07f3a4..8f66e15ec8d6 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -720,28 +720,6 @@ static void igb_get_hw_control(struct igb_adapter *adapter) ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); } -static void igb_init_manageability(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - - if (adapter->en_mng_pt) { - u32 manc2h = rd32(E1000_MANC2H); - u32 manc = rd32(E1000_MANC); - - /* enable receiving management packets to the host */ - /* this will probably generate destination unreachable messages - * from the host OS, but the packets will be handled on SMBUS */ - manc |= E1000_MANC_EN_MNG2HOST; -#define E1000_MNG2HOST_PORT_623 (1 << 5) -#define E1000_MNG2HOST_PORT_664 (1 << 6) - manc2h |= E1000_MNG2HOST_PORT_623; - manc2h |= E1000_MNG2HOST_PORT_664; - wr32(E1000_MANC2H, manc2h); - - wr32(E1000_MANC, manc); - } -} - /** * igb_configure - configure the hardware for RX and TX * @adapter: private board structure @@ -755,7 +733,6 @@ static void igb_configure(struct igb_adapter *adapter) igb_set_multi(netdev); igb_restore_vlan(adapter); - igb_init_manageability(adapter); igb_configure_tx(adapter); igb_setup_rctl(adapter); @@ -4524,8 +4501,6 @@ static void igb_io_resume(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct igb_adapter *adapter = netdev_priv(netdev); - igb_init_manageability(adapter); - if (netif_running(netdev)) { if (igb_up(adapter)) { dev_err(&pdev->dev, "igb_up failed after reset\n"); -- cgit v1.2.3 From f71eb1a24a8cdde8d388c8f93e935aa7ac491047 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 4 Aug 2008 13:33:37 -0700 Subject: sky2: fix PM related regressions Fix the problems reported for 2.6.27-rc1 caused by over aggressive power management. Turning clock off on PCI Express is problematic for WOL, and when doing multi-booting. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 103 ++++++----------------------------------------------- drivers/net/sky2.h | 2 -- 2 files changed, 10 insertions(+), 95 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 5257cf464f1a..7d29edcd40b4 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -275,86 +275,6 @@ static void sky2_power_aux(struct sky2_hw *hw) PC_VAUX_ON | PC_VCC_OFF)); } -static void sky2_power_state(struct sky2_hw *hw, pci_power_t state) -{ - u16 power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL); - int pex = pci_find_capability(hw->pdev, PCI_CAP_ID_EXP); - u32 reg; - - sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - - switch (state) { - case PCI_D0: - break; - - case PCI_D1: - power_control |= 1; - break; - - case PCI_D2: - power_control |= 2; - break; - - case PCI_D3hot: - case PCI_D3cold: - power_control |= 3; - if (hw->flags & SKY2_HW_ADV_POWER_CTL) { - /* additional power saving measurements */ - reg = sky2_pci_read32(hw, PCI_DEV_REG4); - - /* set gating core clock for LTSSM in L1 state */ - reg |= P_PEX_LTSSM_STAT(P_PEX_LTSSM_L1_STAT) | - /* auto clock gated scheme controlled by CLKREQ */ - P_ASPM_A1_MODE_SELECT | - /* enable Gate Root Core Clock */ - P_CLK_GATE_ROOT_COR_ENA; - - if (pex && (hw->flags & SKY2_HW_CLK_POWER)) { - /* enable Clock Power Management (CLKREQ) */ - u16 ctrl = sky2_pci_read16(hw, pex + PCI_EXP_DEVCTL); - - ctrl |= PCI_EXP_DEVCTL_AUX_PME; - sky2_pci_write16(hw, pex + PCI_EXP_DEVCTL, ctrl); - } else - /* force CLKREQ Enable in Our4 (A1b only) */ - reg |= P_ASPM_FORCE_CLKREQ_ENA; - - /* set Mask Register for Release/Gate Clock */ - sky2_pci_write32(hw, PCI_DEV_REG5, - P_REL_PCIE_EXIT_L1_ST | P_GAT_PCIE_ENTER_L1_ST | - P_REL_PCIE_RX_EX_IDLE | P_GAT_PCIE_RX_EL_IDLE | - P_REL_GPHY_LINK_UP | P_GAT_GPHY_LINK_DOWN); - } else - sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_CLK_HALT); - - /* put CPU into reset state */ - sky2_write8(hw, B28_Y2_ASF_STAT_CMD, HCU_CCSR_ASF_RESET); - if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev == CHIP_REV_YU_SU_A0) - /* put CPU into halt state */ - sky2_write8(hw, B28_Y2_ASF_STAT_CMD, HCU_CCSR_ASF_HALTED); - - if (pex && !(hw->flags & SKY2_HW_RAM_BUFFER)) { - reg = sky2_pci_read32(hw, PCI_DEV_REG1); - /* force to PCIe L1 */ - reg |= PCI_FORCE_PEX_L1; - sky2_pci_write32(hw, PCI_DEV_REG1, reg); - } - break; - - default: - dev_warn(&hw->pdev->dev, PFX "Invalid power state (%d) ", - state); - return; - } - - power_control |= PCI_PM_CTRL_PME_ENABLE; - /* Finally, set the new power state. */ - sky2_pci_write32(hw, hw->pm_cap + PCI_PM_CTRL, power_control); - - sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); - sky2_pci_read32(hw, B0_CTST); -} - static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port) { u16 reg; @@ -709,6 +629,11 @@ static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port) sky2_pci_write32(hw, PCI_DEV_REG1, reg1); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); sky2_pci_read32(hw, PCI_DEV_REG1); + + if (hw->chip_id == CHIP_ID_YUKON_FE) + gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE); + else if (hw->flags & SKY2_HW_ADV_POWER_CTL) + sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); } static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port) @@ -2855,10 +2780,6 @@ static int __devinit sky2_init(struct sky2_hw *hw) hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY | SKY2_HW_ADV_POWER_CTL; - - /* check for Rev. A1 dev 4200 */ - if (sky2_read16(hw, Q_ADDR(Q_XA1, Q_WM)) == 0) - hw->flags |= SKY2_HW_CLK_POWER; break; case CHIP_ID_YUKON_EX: @@ -2914,12 +2835,6 @@ static int __devinit sky2_init(struct sky2_hw *hw) if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P') hw->flags |= SKY2_HW_FIBRE_PHY; - hw->pm_cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PM); - if (hw->pm_cap == 0) { - dev_err(&hw->pdev->dev, "cannot find PowerManagement capability\n"); - return -EIO; - } - hw->ports = 1; t8 = sky2_read8(hw, B2_Y2_HW_RES); if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) { @@ -4512,7 +4427,7 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state) pci_save_state(pdev); pci_enable_wake(pdev, pci_choose_state(pdev, state), wol); - sky2_power_state(hw, pci_choose_state(pdev, state)); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); return 0; } @@ -4525,7 +4440,9 @@ static int sky2_resume(struct pci_dev *pdev) if (!hw) return 0; - sky2_power_state(hw, PCI_D0); + err = pci_set_power_state(pdev, PCI_D0); + if (err) + goto out; err = pci_restore_state(pdev); if (err) @@ -4595,7 +4512,7 @@ static void sky2_shutdown(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D3cold, wol); pci_disable_device(pdev); - sky2_power_state(hw, PCI_D3hot); + pci_set_power_state(pdev, PCI_D3hot); } static struct pci_driver sky2_driver = { diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 4d9c4a19bb85..92fb24b27d45 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -2072,9 +2072,7 @@ struct sky2_hw { #define SKY2_HW_NEW_LE 0x00000020 /* new LSOv2 format */ #define SKY2_HW_AUTO_TX_SUM 0x00000040 /* new IP decode for Tx */ #define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */ -#define SKY2_HW_CLK_POWER 0x00000100 /* clock power management */ - int pm_cap; u8 chip_id; u8 chip_rev; u8 pmd_type; -- cgit v1.2.3 From 1ef6841b4c4d9cc26e53271016c1d432ea65ed24 Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Wed, 6 Aug 2008 12:11:03 -0400 Subject: forcedeth: fix rx error policy This patch enforces a stricter policy on rx errors. The driver needs to verify whether there are multiple rx errors versus a single error. Signed-off-by: Ayaz Abdulla Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 01b38b092c76..a39ed1365d61 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -402,6 +402,7 @@ union ring_type { #define NV_RX_FRAMINGERR (1<<29) #define NV_RX_ERROR (1<<30) #define NV_RX_AVAIL (1<<31) +#define NV_RX_ERROR_MASK (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3|NV_RX_ERROR4|NV_RX_CRCERR|NV_RX_OVERFLOW|NV_RX_FRAMINGERR) #define NV_RX2_CHECKSUMMASK (0x1C000000) #define NV_RX2_CHECKSUM_IP (0x10000000) @@ -419,6 +420,7 @@ union ring_type { /* error and avail are the same for both */ #define NV_RX2_ERROR (1<<30) #define NV_RX2_AVAIL (1<<31) +#define NV_RX2_ERROR_MASK (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3|NV_RX2_ERROR4|NV_RX2_CRCERR|NV_RX2_OVERFLOW|NV_RX2_FRAMINGERR) #define NV_RX3_VLAN_TAG_PRESENT (1<<16) #define NV_RX3_VLAN_TAG_MASK (0x0000FFFF) @@ -2632,7 +2634,7 @@ static int nv_rx_process(struct net_device *dev, int limit) if (likely(flags & NV_RX_DESCRIPTORVALID)) { len = flags & LEN_MASK_V1; if (unlikely(flags & NV_RX_ERROR)) { - if (flags & NV_RX_ERROR4) { + if ((flags & NV_RX_ERROR_MASK) == NV_RX_ERROR4) { len = nv_getlen(dev, skb->data, len); if (len < 0) { dev->stats.rx_errors++; @@ -2641,7 +2643,7 @@ static int nv_rx_process(struct net_device *dev, int limit) } } /* framing errors are soft errors */ - else if (flags & NV_RX_FRAMINGERR) { + else if ((flags & NV_RX_ERROR_MASK) == NV_RX_FRAMINGERR) { if (flags & NV_RX_SUBSTRACT1) { len--; } @@ -2667,7 +2669,7 @@ static int nv_rx_process(struct net_device *dev, int limit) if (likely(flags & NV_RX2_DESCRIPTORVALID)) { len = flags & LEN_MASK_V2; if (unlikely(flags & NV_RX2_ERROR)) { - if (flags & NV_RX2_ERROR4) { + if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_ERROR4) { len = nv_getlen(dev, skb->data, len); if (len < 0) { dev->stats.rx_errors++; @@ -2676,7 +2678,7 @@ static int nv_rx_process(struct net_device *dev, int limit) } } /* framing errors are soft errors */ - else if (flags & NV_RX2_FRAMINGERR) { + else if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_FRAMINGERR) { if (flags & NV_RX2_SUBSTRACT1) { len--; } @@ -2766,7 +2768,7 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit) if (likely(flags & NV_RX2_DESCRIPTORVALID)) { len = flags & LEN_MASK_V2; if (unlikely(flags & NV_RX2_ERROR)) { - if (flags & NV_RX2_ERROR4) { + if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_ERROR4) { len = nv_getlen(dev, skb->data, len); if (len < 0) { dev_kfree_skb(skb); @@ -2774,7 +2776,7 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit) } } /* framing errors are soft errors */ - else if (flags & NV_RX2_FRAMINGERR) { + else if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_FRAMINGERR) { if (flags & NV_RX2_SUBSTRACT1) { len--; } -- cgit v1.2.3 From 9c6624352cdba7ef4859dae44eb48d538ac78d1b Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Wed, 6 Aug 2008 12:11:42 -0400 Subject: forcedeth: add new tx stat counters This patch adds support for new tx statistic counters in the hardware - unicast, multicast, and broadcast Signed-off-by: Ayaz Abdulla Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 89 +++++++++++++++++++++++++++++++------------------ 1 file changed, 56 insertions(+), 33 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index a39ed1365d61..3749a9970896 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -77,26 +77,27 @@ * Hardware access: */ -#define DEV_NEED_TIMERIRQ 0x00001 /* set the timer irq flag in the irq mask */ -#define DEV_NEED_LINKTIMER 0x00002 /* poll link settings. Relies on the timer irq */ -#define DEV_HAS_LARGEDESC 0x00004 /* device supports jumbo frames and needs packet format 2 */ -#define DEV_HAS_HIGH_DMA 0x00008 /* device supports 64bit dma */ -#define DEV_HAS_CHECKSUM 0x00010 /* device supports tx and rx checksum offloads */ -#define DEV_HAS_VLAN 0x00020 /* device supports vlan tagging and striping */ -#define DEV_HAS_MSI 0x00040 /* device supports MSI */ -#define DEV_HAS_MSI_X 0x00080 /* device supports MSI-X */ -#define DEV_HAS_POWER_CNTRL 0x00100 /* device supports power savings */ -#define DEV_HAS_STATISTICS_V1 0x00200 /* device supports hw statistics version 1 */ -#define DEV_HAS_STATISTICS_V2 0x00400 /* device supports hw statistics version 2 */ -#define DEV_HAS_TEST_EXTENDED 0x00800 /* device supports extended diagnostic test */ -#define DEV_HAS_MGMT_UNIT 0x01000 /* device supports management unit */ -#define DEV_HAS_CORRECT_MACADDR 0x02000 /* device supports correct mac address order */ -#define DEV_HAS_COLLISION_FIX 0x04000 /* device supports tx collision fix */ -#define DEV_HAS_PAUSEFRAME_TX_V1 0x08000 /* device supports tx pause frames version 1 */ -#define DEV_HAS_PAUSEFRAME_TX_V2 0x10000 /* device supports tx pause frames version 2 */ -#define DEV_HAS_PAUSEFRAME_TX_V3 0x20000 /* device supports tx pause frames version 3 */ -#define DEV_NEED_TX_LIMIT 0x40000 /* device needs to limit tx */ -#define DEV_HAS_GEAR_MODE 0x80000 /* device supports gear mode */ +#define DEV_NEED_TIMERIRQ 0x000001 /* set the timer irq flag in the irq mask */ +#define DEV_NEED_LINKTIMER 0x000002 /* poll link settings. Relies on the timer irq */ +#define DEV_HAS_LARGEDESC 0x000004 /* device supports jumbo frames and needs packet format 2 */ +#define DEV_HAS_HIGH_DMA 0x000008 /* device supports 64bit dma */ +#define DEV_HAS_CHECKSUM 0x000010 /* device supports tx and rx checksum offloads */ +#define DEV_HAS_VLAN 0x000020 /* device supports vlan tagging and striping */ +#define DEV_HAS_MSI 0x000040 /* device supports MSI */ +#define DEV_HAS_MSI_X 0x000080 /* device supports MSI-X */ +#define DEV_HAS_POWER_CNTRL 0x000100 /* device supports power savings */ +#define DEV_HAS_STATISTICS_V1 0x000200 /* device supports hw statistics version 1 */ +#define DEV_HAS_STATISTICS_V2 0x000400 /* device supports hw statistics version 2 */ +#define DEV_HAS_STATISTICS_V3 0x000800 /* device supports hw statistics version 3 */ +#define DEV_HAS_TEST_EXTENDED 0x001000 /* device supports extended diagnostic test */ +#define DEV_HAS_MGMT_UNIT 0x002000 /* device supports management unit */ +#define DEV_HAS_CORRECT_MACADDR 0x004000 /* device supports correct mac address order */ +#define DEV_HAS_COLLISION_FIX 0x008000 /* device supports tx collision fix */ +#define DEV_HAS_PAUSEFRAME_TX_V1 0x010000 /* device supports tx pause frames version 1 */ +#define DEV_HAS_PAUSEFRAME_TX_V2 0x020000 /* device supports tx pause frames version 2 */ +#define DEV_HAS_PAUSEFRAME_TX_V3 0x040000 /* device supports tx pause frames version 3 */ +#define DEV_NEED_TX_LIMIT 0x080000 /* device needs to limit tx */ +#define DEV_HAS_GEAR_MODE 0x100000 /* device supports gear mode */ enum { NvRegIrqStatus = 0x000, @@ -270,6 +271,9 @@ enum { #define NVREG_MIICTL_WRITE 0x00400 #define NVREG_MIICTL_ADDRSHIFT 5 NvRegMIIData = 0x194, + NvRegTxUnicast = 0x1a0, + NvRegTxMulticast = 0x1a4, + NvRegTxBroadcast = 0x1a8, NvRegWakeUpFlags = 0x200, #define NVREG_WAKEUPFLAGS_VAL 0x7770 #define NVREG_WAKEUPFLAGS_BUSYSHIFT 24 @@ -618,7 +622,12 @@ static const struct nv_ethtool_str nv_estats_str[] = { { "rx_bytes" }, { "tx_pause" }, { "rx_pause" }, - { "rx_drop_frame" } + { "rx_drop_frame" }, + + /* version 3 stats */ + { "tx_unicast" }, + { "tx_multicast" }, + { "tx_broadcast" } }; struct nv_ethtool_stats { @@ -654,9 +663,15 @@ struct nv_ethtool_stats { u64 tx_pause; u64 rx_pause; u64 rx_drop_frame; + + /* version 3 stats */ + u64 tx_unicast; + u64 tx_multicast; + u64 tx_broadcast; }; -#define NV_DEV_STATISTICS_V2_COUNT (sizeof(struct nv_ethtool_stats)/sizeof(u64)) +#define NV_DEV_STATISTICS_V3_COUNT (sizeof(struct nv_ethtool_stats)/sizeof(u64)) +#define NV_DEV_STATISTICS_V2_COUNT (NV_DEV_STATISTICS_V3_COUNT - 3) #define NV_DEV_STATISTICS_V1_COUNT (NV_DEV_STATISTICS_V2_COUNT - 6) /* diagnostics */ @@ -1630,6 +1645,12 @@ static void nv_get_hw_stats(struct net_device *dev) np->estats.rx_pause += readl(base + NvRegRxPause); np->estats.rx_drop_frame += readl(base + NvRegRxDropFrame); } + + if (np->driver_data & DEV_HAS_STATISTICS_V3) { + np->estats.tx_unicast += readl(base + NvRegTxUnicast); + np->estats.tx_multicast += readl(base + NvRegTxMulticast); + np->estats.tx_broadcast += readl(base + NvRegTxBroadcast); + } } /* @@ -1643,7 +1664,7 @@ static struct net_device_stats *nv_get_stats(struct net_device *dev) struct fe_priv *np = netdev_priv(dev); /* If the nic supports hw counters then retrieve latest values */ - if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2)) { + if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3)) { nv_get_hw_stats(dev); /* copy to net_device stats */ @@ -4742,6 +4763,8 @@ static int nv_get_sset_count(struct net_device *dev, int sset) return NV_DEV_STATISTICS_V1_COUNT; else if (np->driver_data & DEV_HAS_STATISTICS_V2) return NV_DEV_STATISTICS_V2_COUNT; + else if (np->driver_data & DEV_HAS_STATISTICS_V3) + return NV_DEV_STATISTICS_V3_COUNT; else return 0; default: @@ -5326,7 +5349,7 @@ static int nv_open(struct net_device *dev) mod_timer(&np->oom_kick, jiffies + OOM_REFILL); /* start statistics timer */ - if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2)) + if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3)) mod_timer(&np->stats_poll, round_jiffies(jiffies + STATS_INTERVAL)); @@ -5430,7 +5453,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i if (err < 0) goto out_disable; - if (id->driver_data & (DEV_HAS_VLAN|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V2)) + if (id->driver_data & (DEV_HAS_VLAN|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3)) np->register_size = NV_PCI_REGSZ_VER3; else if (id->driver_data & DEV_HAS_STATISTICS_V1) np->register_size = NV_PCI_REGSZ_VER2; @@ -6085,35 +6108,35 @@ static struct pci_device_id pci_tbl[] = { }, { /* MCP77 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_32), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP77 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_33), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP77 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_34), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP77 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_35), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_36), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_37), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_38), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_39), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, {0,}, }; -- cgit v1.2.3 From 06941931d8697dd939d7cac379565b1b2de1415f Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Wed, 6 Aug 2008 12:12:18 -0400 Subject: forcedeth: add jumbo frame support for mcp79 This patch adds jumbo frame support for MCP79 chipsets. Signed-off-by: Ayaz Abdulla Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 3749a9970896..d9495d2fd808 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -6124,19 +6124,19 @@ static struct pci_device_id pci_tbl[] = { }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_36), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_37), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_38), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_39), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, {0,}, }; -- cgit v1.2.3 From 9a33e883564c2db8e1b3b645de4579a98ac084d2 Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Wed, 6 Aug 2008 12:12:34 -0400 Subject: forcedeth: add tx pause limit This patch adds support for limiting the number of tx pause frames to a default of 8. Previously, hardware would send out continuous stream of pause frames. Signed-off-by: Ayaz Abdulla Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index d9495d2fd808..053971e5fc94 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -249,6 +249,8 @@ enum { #define NVREG_TX_PAUSEFRAME_ENABLE_V1 0x01800010 #define NVREG_TX_PAUSEFRAME_ENABLE_V2 0x056003f0 #define NVREG_TX_PAUSEFRAME_ENABLE_V3 0x09f00880 + NvRegTxPauseFrameLimit = 0x174, +#define NVREG_TX_PAUSEFRAMELIMIT_ENABLE 0x00010000 NvRegMIIStatus = 0x180, #define NVREG_MIISTAT_ERROR 0x0001 #define NVREG_MIISTAT_LINKCHANGE 0x0008 @@ -3076,8 +3078,11 @@ static void nv_update_pause(struct net_device *dev, u32 pause_flags) u32 pause_enable = NVREG_TX_PAUSEFRAME_ENABLE_V1; if (np->driver_data & DEV_HAS_PAUSEFRAME_TX_V2) pause_enable = NVREG_TX_PAUSEFRAME_ENABLE_V2; - if (np->driver_data & DEV_HAS_PAUSEFRAME_TX_V3) + if (np->driver_data & DEV_HAS_PAUSEFRAME_TX_V3) { pause_enable = NVREG_TX_PAUSEFRAME_ENABLE_V3; + /* limit the number of tx pause frames to a default of 8 */ + writel(readl(base + NvRegTxPauseFrameLimit)|NVREG_TX_PAUSEFRAMELIMIT_ENABLE, base + NvRegTxPauseFrameLimit); + } writel(pause_enable, base + NvRegTxPauseFrame); writel(regmisc|NVREG_MISC1_PAUSE_TX, base + NvRegMisc1); np->pause_flags |= NV_PAUSEFRAME_TX_ENABLE; -- cgit v1.2.3 From 5b1c29b4365d2eaf05eb81899cb1ca847dfe026e Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 6 Aug 2008 15:08:50 +0800 Subject: net/fs_enet: remove redundant messages for performance Currently when we do a packet flood to the Ethernet port, the console reports error every time when a packet is dropped. This is too redundant and cost performance. Remove message for this type of event. Signed-off-by: Li Yang Signed-off-by: Jeff Garzik --- drivers/net/fs_enet/mac-fcc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c index 0a97fc2d97ec..1c7ef812a8e3 100644 --- a/drivers/net/fs_enet/mac-fcc.c +++ b/drivers/net/fs_enet/mac-fcc.c @@ -126,7 +126,7 @@ out: #define FCC_NAPI_RX_EVENT_MSK (FCC_ENET_RXF | FCC_ENET_RXB) #define FCC_RX_EVENT (FCC_ENET_RXF) #define FCC_TX_EVENT (FCC_ENET_TXB) -#define FCC_ERR_EVENT_MSK (FCC_ENET_TXE | FCC_ENET_BSY) +#define FCC_ERR_EVENT_MSK (FCC_ENET_TXE) static int setup_data(struct net_device *dev) { -- cgit v1.2.3 From 4ad7a018cf4ac3cbad661c28c0f783ee0a6e3bf6 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 4 Aug 2008 11:59:36 +0300 Subject: remove bogus CONFIG_GFAR_NAPI's The commit that made the CONFIG_GFAR_NAPI code unconditional was included at the same time as a new CONFIG_GFAR_NAPI user, resulting in these bugus #ifdef's. Reported-by: Robert P. J. Day Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/net/gianfar.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index b8394cf134e8..ca6cf6ecb37b 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -414,9 +414,7 @@ static int gfar_suspend(struct platform_device *pdev, pm_message_t state) spin_unlock(&priv->rxlock); spin_unlock_irqrestore(&priv->txlock, flags); -#ifdef CONFIG_GFAR_NAPI napi_disable(&priv->napi); -#endif if (magic_packet) { /* Enable interrupt on Magic Packet */ @@ -469,9 +467,7 @@ static int gfar_resume(struct platform_device *pdev) netif_device_attach(dev); -#ifdef CONFIG_GFAR_NAPI napi_enable(&priv->napi); -#endif return 0; } -- cgit v1.2.3 From 24a7a45511f89959b4f1dc60a66260d09777901a Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Fri, 1 Aug 2008 03:14:55 -0700 Subject: netxen: fix link status, link speed For NX3031, the phy is managed by firmware, so driver should avoid setting any phy registers. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic_ethtool.c | 33 +++++++++++++++++++++++--------- drivers/net/netxen/netxen_nic_hdr.h | 7 +++++++ drivers/net/netxen/netxen_nic_hw.c | 17 ++++++++++++---- drivers/net/netxen/netxen_nic_main.c | 19 ++++++++---------- drivers/net/netxen/netxen_nic_niu.c | 12 ++++++++++++ drivers/net/netxen/netxen_nic_phan_reg.h | 4 ++-- 6 files changed, 66 insertions(+), 26 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c index 48ee06b6f4e9..f9b933efa362 100644 --- a/drivers/net/netxen/netxen_nic_ethtool.c +++ b/drivers/net/netxen/netxen_nic_ethtool.c @@ -140,18 +140,33 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) if (netif_running(dev)) { ecmd->speed = adapter->link_speed; ecmd->duplex = adapter->link_duplex; - } else - return -EIO; /* link absent */ + ecmd->autoneg = adapter->link_autoneg; + } + } else if (adapter->ahw.board_type == NETXEN_NIC_XGBE) { - ecmd->supported = (SUPPORTED_TP | - SUPPORTED_1000baseT_Full | - SUPPORTED_10000baseT_Full); - ecmd->advertising = (ADVERTISED_TP | - ADVERTISED_1000baseT_Full | - ADVERTISED_10000baseT_Full); + u32 val; + + adapter->hw_read_wx(adapter, NETXEN_PORT_MODE_ADDR, &val, 4); + if (val == NETXEN_PORT_MODE_802_3_AP) { + ecmd->supported = SUPPORTED_1000baseT_Full; + ecmd->advertising = ADVERTISED_1000baseT_Full; + } else { + ecmd->supported = SUPPORTED_10000baseT_Full; + ecmd->advertising = ADVERTISED_10000baseT_Full; + } + ecmd->port = PORT_TP; - ecmd->speed = SPEED_10000; + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) { + u16 pcifn = adapter->ahw.pci_func; + + adapter->hw_read_wx(adapter, + P3_LINK_SPEED_REG(pcifn), &val, 4); + ecmd->speed = P3_LINK_SPEED_MHZ * + P3_LINK_SPEED_VAL(pcifn, val); + } else + ecmd->speed = SPEED_10000; + ecmd->duplex = DUPLEX_FULL; ecmd->autoneg = AUTONEG_DISABLE; } else diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h index 3ce13e451aac..ccf6d70064bc 100644 --- a/drivers/net/netxen/netxen_nic_hdr.h +++ b/drivers/net/netxen/netxen_nic_hdr.h @@ -724,6 +724,13 @@ enum { #define XG_LINK_STATE_P3(pcifn,val) \ (((val) >> ((pcifn) * 4)) & XG_LINK_STATE_P3_MASK) +#define P3_LINK_SPEED_MHZ 100 +#define P3_LINK_SPEED_MASK 0xff +#define P3_LINK_SPEED_REG(pcifn) \ + (CRB_PF_LINK_SPEED_1 + (((pcifn) / 4) * 4)) +#define P3_LINK_SPEED_VAL(pcifn, reg) \ + (((reg) >> (8 * ((pcifn) & 0x3))) & P3_LINK_SPEED_MASK) + #define NETXEN_CAM_RAM_BASE (NETXEN_CRB_CAM + 0x02000) #define NETXEN_CAM_RAM(reg) (NETXEN_CAM_RAM_BASE + (reg)) #define NETXEN_FW_VERSION_MAJOR (NETXEN_CAM_RAM(0x150)) diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 96a3bc6426e2..008a6e7ffa00 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -2074,12 +2074,22 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter) __u32 status; __u32 autoneg; __u32 mode; + __u32 port_mode; netxen_nic_read_w0(adapter, NETXEN_NIU_MODE, &mode); if (netxen_get_niu_enable_ge(mode)) { /* Gb 10/100/1000 Mbps mode */ + + adapter->hw_read_wx(adapter, + NETXEN_PORT_MODE_ADDR, &port_mode, 4); + if (port_mode == NETXEN_PORT_MODE_802_3_AP) { + adapter->link_speed = SPEED_1000; + adapter->link_duplex = DUPLEX_FULL; + adapter->link_autoneg = AUTONEG_DISABLE; + return; + } + if (adapter->phy_read - && adapter-> - phy_read(adapter, + && adapter->phy_read(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, &status) == 0) { if (netxen_get_phy_link(status)) { @@ -2109,8 +2119,7 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter) break; } if (adapter->phy_read - && adapter-> - phy_read(adapter, + && adapter->phy_read(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG, &autoneg) != 0) adapter->link_autoneg = autoneg; diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 91d209a8f6cb..7b8688e7bfa3 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1410,20 +1410,17 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter) port = adapter->physical_port; - if (adapter->ahw.board_type == NETXEN_NIC_GBE) { - val = adapter->pci_read_normalize(adapter, CRB_XG_STATE); - linkup = (val >> port) & 1; + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) { + val = adapter->pci_read_normalize(adapter, CRB_XG_STATE_P3); + val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val); + linkup = (val == XG_LINK_UP_P3); } else { - if (adapter->fw_major < 4) { - val = adapter->pci_read_normalize(adapter, - CRB_XG_STATE); + val = adapter->pci_read_normalize(adapter, CRB_XG_STATE); + if (adapter->ahw.board_type == NETXEN_NIC_GBE) + linkup = (val >> port) & 1; + else { val = (val >> port*8) & 0xff; linkup = (val == XG_LINK_UP); - } else { - val = adapter->pci_read_normalize(adapter, - CRB_XG_STATE_P3); - val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val); - linkup = (val == XG_LINK_UP_P3); } } diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c index 4cb8f4a1cf4b..c9493e2df200 100644 --- a/drivers/net/netxen/netxen_nic_niu.c +++ b/drivers/net/netxen/netxen_nic_niu.c @@ -610,6 +610,9 @@ int netxen_niu_macaddr_set(struct netxen_adapter *adapter, int i; DECLARE_MAC_BUF(mac); + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) + return 0; + for (i = 0; i < 10; i++) { temp[0] = temp[1] = 0; memcpy(temp + 2, addr, 2); @@ -727,6 +730,9 @@ int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter) __u32 mac_cfg0; u32 port = adapter->physical_port; + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) + return 0; + if (port > NETXEN_NIU_MAX_GBE_PORTS) return -EINVAL; mac_cfg0 = 0; @@ -743,6 +749,9 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter) __u32 mac_cfg; u32 port = adapter->physical_port; + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) + return 0; + if (port > NETXEN_NIU_MAX_XG_PORTS) return -EINVAL; @@ -819,6 +828,9 @@ int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter, u8 temp[4]; u32 val; + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) + return 0; + if ((phy < 0) || (phy > NETXEN_NIU_MAX_XG_PORTS)) return -EIO; diff --git a/drivers/net/netxen/netxen_nic_phan_reg.h b/drivers/net/netxen/netxen_nic_phan_reg.h index 3bfa51b62a4f..83e5ee57bfef 100644 --- a/drivers/net/netxen/netxen_nic_phan_reg.h +++ b/drivers/net/netxen/netxen_nic_phan_reg.h @@ -95,8 +95,8 @@ #define CRB_HOST_STS_PROD NETXEN_NIC_REG(0xdc) #define CRB_HOST_STS_CONS NETXEN_NIC_REG(0xe0) #define CRB_PEG_CMD_PROD NETXEN_NIC_REG(0xe4) -#define CRB_PEG_CMD_CONS NETXEN_NIC_REG(0xe8) -#define CRB_HOST_BUFFER_PROD NETXEN_NIC_REG(0xec) +#define CRB_PF_LINK_SPEED_1 NETXEN_NIC_REG(0xe8) +#define CRB_PF_LINK_SPEED_2 NETXEN_NIC_REG(0xec) #define CRB_HOST_BUFFER_CONS NETXEN_NIC_REG(0xf0) #define CRB_JUMBO_BUFFER_PROD NETXEN_NIC_REG(0xf4) #define CRB_JUMBO_BUFFER_CONS NETXEN_NIC_REG(0xf8) -- cgit v1.2.3 From a70f939338cae650f177ae79562ec44659788bb4 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Fri, 1 Aug 2008 03:14:56 -0700 Subject: netxen: add new board types Add couple of new board configurations based on NX3031 chip. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic.h | 6 +++++- drivers/net/netxen/netxen_nic_ethtool.c | 2 ++ drivers/net/netxen/netxen_nic_hw.c | 3 +++ drivers/net/netxen/netxen_nic_main.c | 6 ++++++ 4 files changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index 8e736614407d..07a59dc83dba 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -508,6 +508,8 @@ typedef enum { NETXEN_BRDTYPE_P3_10000_BASE_T = 0x0027, NETXEN_BRDTYPE_P3_XG_LOM = 0x0028, NETXEN_BRDTYPE_P3_4_GB_MM = 0x0029, + NETXEN_BRDTYPE_P3_10G_SFP_CT = 0x002a, + NETXEN_BRDTYPE_P3_10G_SFP_QT = 0x002b, NETXEN_BRDTYPE_P3_10G_CX4 = 0x0031, NETXEN_BRDTYPE_P3_10G_XFP = 0x0032 @@ -1502,7 +1504,9 @@ static const struct netxen_brdinfo netxen_boards[] = { {NETXEN_BRDTYPE_P3_10G_SFP_PLUS, 2, "Dual XGb SFP+ LP"}, {NETXEN_BRDTYPE_P3_10000_BASE_T, 1, "XGB 10G BaseT LP"}, {NETXEN_BRDTYPE_P3_XG_LOM, 2, "Dual XGb LOM"}, - {NETXEN_BRDTYPE_P3_4_GB_MM, 4, "Quad GB - March Madness"}, + {NETXEN_BRDTYPE_P3_4_GB_MM, 4, "NX3031 Gigabit Ethernet"}, + {NETXEN_BRDTYPE_P3_10G_SFP_CT, 2, "NX3031 10 Gigabit Ethernet"}, + {NETXEN_BRDTYPE_P3_10G_SFP_QT, 2, "Quanta Dual XGb SFP+"}, {NETXEN_BRDTYPE_P3_10G_CX4, 2, "Reference Dual CX4 Option"}, {NETXEN_BRDTYPE_P3_10G_XFP, 1, "Reference Single XFP Option"} }; diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c index f9b933efa362..4ad3e0844b99 100644 --- a/drivers/net/netxen/netxen_nic_ethtool.c +++ b/drivers/net/netxen/netxen_nic_ethtool.c @@ -207,6 +207,8 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) break; case NETXEN_BRDTYPE_P2_SB31_10G: case NETXEN_BRDTYPE_P3_10G_SFP_PLUS: + case NETXEN_BRDTYPE_P3_10G_SFP_CT: + case NETXEN_BRDTYPE_P3_10G_SFP_QT: case NETXEN_BRDTYPE_P3_10G_XFP: ecmd->supported |= SUPPORTED_FIBRE; ecmd->advertising |= ADVERTISED_FIBRE; diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 008a6e7ffa00..d0c6935881e7 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -2016,6 +2016,8 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter) case NETXEN_BRDTYPE_P3_10G_CX4_LP: case NETXEN_BRDTYPE_P3_IMEZ: case NETXEN_BRDTYPE_P3_10G_SFP_PLUS: + case NETXEN_BRDTYPE_P3_10G_SFP_CT: + case NETXEN_BRDTYPE_P3_10G_SFP_QT: case NETXEN_BRDTYPE_P3_10G_XFP: case NETXEN_BRDTYPE_P3_10000_BASE_T: @@ -2034,6 +2036,7 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter) default: printk("%s: Unknown(%x)\n", netxen_nic_driver_name, boardinfo->board_type); + rv = -ENODEV; break; } diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 7b8688e7bfa3..153b391917e4 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -284,6 +284,8 @@ static void netxen_check_options(struct netxen_adapter *adapter) case NETXEN_BRDTYPE_P3_10G_CX4_LP: case NETXEN_BRDTYPE_P3_IMEZ: case NETXEN_BRDTYPE_P3_10G_SFP_PLUS: + case NETXEN_BRDTYPE_P3_10G_SFP_QT: + case NETXEN_BRDTYPE_P3_10G_SFP_CT: case NETXEN_BRDTYPE_P3_10G_XFP: case NETXEN_BRDTYPE_P3_10000_BASE_T: adapter->msix_supported = !!use_msi_x; @@ -301,6 +303,10 @@ static void netxen_check_options(struct netxen_adapter *adapter) case NETXEN_BRDTYPE_P3_REF_QG: case NETXEN_BRDTYPE_P3_4_GB: case NETXEN_BRDTYPE_P3_4_GB_MM: + adapter->msix_supported = 0; + adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G; + break; + case NETXEN_BRDTYPE_P2_SB35_4G: case NETXEN_BRDTYPE_P2_SB31_2G: adapter->msix_supported = 0; -- cgit v1.2.3 From ea771bd51c3b9b9683860515d93e6155a345fa2f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 6 Aug 2008 23:11:08 -0700 Subject: sparc64: Use kernel/uid16.c helpers instead of own copy. Noticed by Adrian Bunk. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sys_sparc32.c | 176 -------------------------------------- arch/sparc64/kernel/systbls.S | 20 ++--- 2 files changed, 10 insertions(+), 186 deletions(-) diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c index 97b77fb5c50e..3d118531baff 100644 --- a/arch/sparc64/kernel/sys_sparc32.c +++ b/arch/sparc64/kernel/sys_sparc32.c @@ -58,182 +58,6 @@ #include #include -asmlinkage long sys32_chown16(const char __user * filename, u16 user, u16 group) -{ - return sys_chown(filename, low2highuid(user), low2highgid(group)); -} - -asmlinkage long sys32_lchown16(const char __user * filename, u16 user, u16 group) -{ - return sys_lchown(filename, low2highuid(user), low2highgid(group)); -} - -asmlinkage long sys32_fchown16(unsigned int fd, u16 user, u16 group) -{ - return sys_fchown(fd, low2highuid(user), low2highgid(group)); -} - -asmlinkage long sys32_setregid16(u16 rgid, u16 egid) -{ - return sys_setregid(low2highgid(rgid), low2highgid(egid)); -} - -asmlinkage long sys32_setgid16(u16 gid) -{ - return sys_setgid((gid_t)gid); -} - -asmlinkage long sys32_setreuid16(u16 ruid, u16 euid) -{ - return sys_setreuid(low2highuid(ruid), low2highuid(euid)); -} - -asmlinkage long sys32_setuid16(u16 uid) -{ - return sys_setuid((uid_t)uid); -} - -asmlinkage long sys32_setresuid16(u16 ruid, u16 euid, u16 suid) -{ - return sys_setresuid(low2highuid(ruid), low2highuid(euid), - low2highuid(suid)); -} - -asmlinkage long sys32_getresuid16(u16 __user *ruid, u16 __user *euid, u16 __user *suid) -{ - int retval; - - if (!(retval = put_user(high2lowuid(current->uid), ruid)) && - !(retval = put_user(high2lowuid(current->euid), euid))) - retval = put_user(high2lowuid(current->suid), suid); - - return retval; -} - -asmlinkage long sys32_setresgid16(u16 rgid, u16 egid, u16 sgid) -{ - return sys_setresgid(low2highgid(rgid), low2highgid(egid), - low2highgid(sgid)); -} - -asmlinkage long sys32_getresgid16(u16 __user *rgid, u16 __user *egid, u16 __user *sgid) -{ - int retval; - - if (!(retval = put_user(high2lowgid(current->gid), rgid)) && - !(retval = put_user(high2lowgid(current->egid), egid))) - retval = put_user(high2lowgid(current->sgid), sgid); - - return retval; -} - -asmlinkage long sys32_setfsuid16(u16 uid) -{ - return sys_setfsuid((uid_t)uid); -} - -asmlinkage long sys32_setfsgid16(u16 gid) -{ - return sys_setfsgid((gid_t)gid); -} - -static int groups16_to_user(u16 __user *grouplist, struct group_info *group_info) -{ - int i; - u16 group; - - for (i = 0; i < group_info->ngroups; i++) { - group = (u16)GROUP_AT(group_info, i); - if (put_user(group, grouplist+i)) - return -EFAULT; - } - - return 0; -} - -static int groups16_from_user(struct group_info *group_info, u16 __user *grouplist) -{ - int i; - u16 group; - - for (i = 0; i < group_info->ngroups; i++) { - if (get_user(group, grouplist+i)) - return -EFAULT; - GROUP_AT(group_info, i) = (gid_t)group; - } - - return 0; -} - -asmlinkage long sys32_getgroups16(int gidsetsize, u16 __user *grouplist) -{ - int i; - - if (gidsetsize < 0) - return -EINVAL; - - get_group_info(current->group_info); - i = current->group_info->ngroups; - if (gidsetsize) { - if (i > gidsetsize) { - i = -EINVAL; - goto out; - } - if (groups16_to_user(grouplist, current->group_info)) { - i = -EFAULT; - goto out; - } - } -out: - put_group_info(current->group_info); - return i; -} - -asmlinkage long sys32_setgroups16(int gidsetsize, u16 __user *grouplist) -{ - struct group_info *group_info; - int retval; - - if (!capable(CAP_SETGID)) - return -EPERM; - if ((unsigned)gidsetsize > NGROUPS_MAX) - return -EINVAL; - - group_info = groups_alloc(gidsetsize); - if (!group_info) - return -ENOMEM; - retval = groups16_from_user(group_info, grouplist); - if (retval) { - put_group_info(group_info); - return retval; - } - - retval = set_current_groups(group_info); - put_group_info(group_info); - - return retval; -} - -asmlinkage long sys32_getuid16(void) -{ - return high2lowuid(current->uid); -} - -asmlinkage long sys32_geteuid16(void) -{ - return high2lowuid(current->euid); -} - -asmlinkage long sys32_getgid16(void) -{ - return high2lowgid(current->gid); -} - -asmlinkage long sys32_getegid16(void) -{ - return high2lowgid(current->egid); -} - /* 32-bit timeval and related flotsam. */ static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i) diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S index 1095bf4c5100..0fdbf3ba956e 100644 --- a/arch/sparc64/kernel/systbls.S +++ b/arch/sparc64/kernel/systbls.S @@ -20,21 +20,21 @@ sys_call_table32: /*0*/ .word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write /*5*/ .word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link -/*10*/ .word sys_unlink, sunos_execv, sys_chdir, sys32_chown16, sys32_mknod -/*15*/ .word sys_chmod, sys32_lchown16, sparc_brk, sys32_perfctr, sys32_lseek -/*20*/ .word sys_getpid, sys_capget, sys_capset, sys32_setuid16, sys32_getuid16 +/*10*/ .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod +/*15*/ .word sys_chmod, sys_lchown16, sparc_brk, sys32_perfctr, sys32_lseek +/*20*/ .word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16 /*25*/ .word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys32_pause /*30*/ .word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice .word sys_chown, sys_sync, sys32_kill, compat_sys_newstat, sys32_sendfile /*40*/ .word compat_sys_newlstat, sys_dup, sys_pipe, compat_sys_times, sys_getuid - .word sys32_umount, sys32_setgid16, sys32_getgid16, sys32_signal, sys32_geteuid16 -/*50*/ .word sys32_getegid16, sys_acct, sys_nis_syscall, sys_getgid, compat_sys_ioctl + .word sys32_umount, sys_setgid16, sys_getgid16, sys32_signal, sys_geteuid16 +/*50*/ .word sys_getegid16, sys_acct, sys_nis_syscall, sys_getgid, compat_sys_ioctl .word sys32_reboot, sys32_mmap2, sys_symlink, sys32_readlink, sys32_execve /*60*/ .word sys32_umask, sys_chroot, compat_sys_newfstat, compat_sys_fstat64, sys_getpagesize .word sys32_msync, sys_vfork, sys32_pread64, sys32_pwrite64, sys_geteuid /*70*/ .word sys_getegid, sys_mmap, sys_setreuid, sys_munmap, sys_mprotect - .word sys_madvise, sys_vhangup, sys32_truncate64, sys_mincore, sys32_getgroups16 -/*80*/ .word sys32_setgroups16, sys_getpgrp, sys32_setgroups, sys32_setitimer, sys32_ftruncate64 + .word sys_madvise, sys_vhangup, sys32_truncate64, sys_mincore, sys_getgroups16 +/*80*/ .word sys_setgroups16, sys_getpgrp, sys32_setgroups, sys32_setitimer, sys32_ftruncate64 .word sys32_swapon, sys32_getitimer, sys_setuid, sys32_sethostname, sys_setgid /*90*/ .word sys_dup2, sys_setfsuid, compat_sys_fcntl, sys32_select, sys_setfsgid .word sys_fsync, sys32_setpriority, sys_nis_syscall, sys_nis_syscall, sys_nis_syscall @@ -42,8 +42,8 @@ sys_call_table32: .word compat_sys_rt_sigtimedwait, sys32_rt_sigqueueinfo, compat_sys_rt_sigsuspend, sys_setresuid, sys_getresuid /*110*/ .word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall .word sys32_getgroups, sys32_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd -/*120*/ .word compat_sys_readv, compat_sys_writev, sys32_settimeofday, sys32_fchown16, sys_fchmod - .word sys_nis_syscall, sys32_setreuid16, sys32_setregid16, sys_rename, sys_truncate +/*120*/ .word compat_sys_readv, compat_sys_writev, sys32_settimeofday, sys_fchown16, sys_fchmod + .word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate /*130*/ .word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall .word sys_nis_syscall, sys32_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64 /*140*/ .word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit @@ -63,7 +63,7 @@ sys_call_table32: /*210*/ .word sys32_fadvise64_64, sys32_tgkill, sys32_waitpid, sys_swapoff, compat_sys_sysinfo .word compat_sys_ipc, sys32_sigreturn, sys_clone, sys32_ioprio_get, compat_sys_adjtimex /*220*/ .word sys32_sigprocmask, sys_ni_syscall, sys32_delete_module, sys_ni_syscall, sys32_getpgid - .word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys32_setfsuid16, sys32_setfsgid16 + .word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys_setfsuid16, sys_setfsgid16 /*230*/ .word sys32_select, compat_sys_time, sys32_splice, compat_sys_stime, compat_sys_statfs64 .word compat_sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys32_mlockall /*240*/ .word sys_munlockall, sys32_sched_setparam, sys32_sched_getparam, sys32_sched_setscheduler, sys32_sched_getscheduler -- cgit v1.2.3 From d71e1be8edd355668a12a18660da03ae993dd9df Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Fri, 1 Aug 2008 03:14:57 -0700 Subject: netxen: fix legacy interrupts Fix legacy interrupt mode for NX3031 chips, read pci interrupt state in hardware to guard against spurious interrupt. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic_hdr.h | 3 +++ drivers/net/netxen/netxen_nic_main.c | 48 +++++++++++++++++++++++------------- 2 files changed, 34 insertions(+), 17 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h index ccf6d70064bc..e8e8d73f6ed7 100644 --- a/drivers/net/netxen/netxen_nic_hdr.h +++ b/drivers/net/netxen/netxen_nic_hdr.h @@ -843,9 +843,11 @@ enum { #define PCIE_SETUP_FUNCTION (0x12040) #define PCIE_SETUP_FUNCTION2 (0x12048) +#define PCIE_MISCCFG_RC (0x1206c) #define PCIE_TGT_SPLIT_CHICKEN (0x12080) #define PCIE_CHICKEN3 (0x120c8) +#define ISR_INT_STATE_REG (NETXEN_PCIX_PS_REG(PCIE_MISCCFG_RC)) #define PCIE_MAX_MASTER_SPLIT (0x14048) #define NETXEN_PORT_MODE_NONE 0 @@ -861,6 +863,7 @@ enum { #define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL (0x14) #define ISR_MSI_INT_TRIGGER(FUNC) (NETXEN_PCIX_PS_REG(PCIX_MSI_F(FUNC))) +#define ISR_LEGACY_INT_TRIGGERED(VAL) (((VAL) & 0x300) == 0x200) /* * PCI Interrupt Vector Values. diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 153b391917e4..320d010678cd 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -166,7 +166,8 @@ static void netxen_nic_disable_int(struct netxen_adapter *adapter) if (!NETXEN_IS_MSI_FAMILY(adapter)) { do { adapter->pci_write_immediate(adapter, - ISR_INT_TARGET_STATUS, 0xffffffff); + adapter->legacy_intr.tgt_status_reg, + 0xffffffff); mask = adapter->pci_read_immediate(adapter, ISR_INT_VECTOR); if (!(mask & 0x80)) @@ -175,7 +176,7 @@ static void netxen_nic_disable_int(struct netxen_adapter *adapter) } while (--retries); if (!retries) { - printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n", + printk(KERN_NOTICE "%s: Failed to disable interrupt\n", netxen_nic_driver_name); } } else { @@ -190,8 +191,6 @@ static void netxen_nic_enable_int(struct netxen_adapter *adapter) { u32 mask; - DPRINTK(1, INFO, "Entered ISR Enable \n"); - if (adapter->intr_scheme != -1 && adapter->intr_scheme != INTR_SCHEME_PERPORT) { switch (adapter->ahw.board_type) { @@ -213,16 +212,13 @@ static void netxen_nic_enable_int(struct netxen_adapter *adapter) if (!NETXEN_IS_MSI_FAMILY(adapter)) { mask = 0xbff; - if (adapter->intr_scheme != -1 && - adapter->intr_scheme != INTR_SCHEME_PERPORT) { + if (adapter->intr_scheme == INTR_SCHEME_PERPORT) + adapter->pci_write_immediate(adapter, + adapter->legacy_intr.tgt_mask_reg, mask); + else adapter->pci_write_normalize(adapter, CRB_INT_VECTOR, 0); - } - adapter->pci_write_immediate(adapter, - ISR_INT_TARGET_MASK, mask); } - - DPRINTK(1, INFO, "Done with enable Int\n"); } static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id) @@ -1538,15 +1534,33 @@ static irqreturn_t netxen_intr(int irq, void *data) struct netxen_adapter *adapter = data; u32 our_int = 0; - our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR); - /* not our interrupt */ - if ((our_int & (0x80 << adapter->portnum)) == 0) + u32 status = 0; + + status = adapter->pci_read_immediate(adapter, ISR_INT_VECTOR); + + if (!(status & adapter->legacy_intr.int_vec_bit)) return IRQ_NONE; - if (adapter->intr_scheme == INTR_SCHEME_PERPORT) { - /* claim interrupt */ - adapter->pci_write_normalize(adapter, CRB_INT_VECTOR, + if (adapter->ahw.revision_id >= NX_P3_B1) { + /* check interrupt state machine, to be sure */ + status = adapter->pci_read_immediate(adapter, + ISR_INT_STATE_REG); + if (!ISR_LEGACY_INT_TRIGGERED(status)) + return IRQ_NONE; + + } else if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) { + + our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR); + /* not our interrupt */ + if ((our_int & (0x80 << adapter->portnum)) == 0) + return IRQ_NONE; + + if (adapter->intr_scheme == INTR_SCHEME_PERPORT) { + /* claim interrupt */ + adapter->pci_write_normalize(adapter, + CRB_INT_VECTOR, our_int & ~((u32)(0x80 << adapter->portnum))); + } } netxen_handle_int(adapter); -- cgit v1.2.3 From 83821a078a1617e120d76954f455204cec78fe9d Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Fri, 1 Aug 2008 03:14:58 -0700 Subject: netxen: fix cmd ring init Initialize producer and consumer indices during netdev open(), only for old firmware/chip. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic_main.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 320d010678cd..311a4bdfa855 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -702,13 +702,10 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->status &= ~NETXEN_NETDEV_STATUS; adapter->rx_csum = 1; adapter->mc_enabled = 0; - if (NX_IS_REVISION_P3(revision_id)) { + if (NX_IS_REVISION_P3(revision_id)) adapter->max_mc_count = 38; - adapter->max_rds_rings = 2; - } else { + else adapter->max_mc_count = 16; - adapter->max_rds_rings = 3; - } netdev->open = netxen_nic_open; netdev->stop = netxen_nic_close; @@ -781,10 +778,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (adapter->portnum == 0) first_driver = 1; } - adapter->crb_addr_cmd_producer = crb_cmd_producer[adapter->portnum]; - adapter->crb_addr_cmd_consumer = crb_cmd_consumer[adapter->portnum]; - netxen_nic_update_cmd_producer(adapter, 0); - netxen_nic_update_cmd_consumer(adapter, 0); if (first_driver) { first_boot = adapter->pci_read_normalize(adapter, @@ -1055,6 +1048,11 @@ static int netxen_nic_open(struct net_device *netdev) return -EIO; } + if (adapter->fw_major < 4) + adapter->max_rds_rings = 3; + else + adapter->max_rds_rings = 2; + err = netxen_alloc_sw_resources(adapter); if (err) { printk(KERN_ERR "%s: Error in setting sw resources\n", @@ -1076,10 +1074,10 @@ static int netxen_nic_open(struct net_device *netdev) crb_cmd_producer[adapter->portnum]; adapter->crb_addr_cmd_consumer = crb_cmd_consumer[adapter->portnum]; - } - netxen_nic_update_cmd_producer(adapter, 0); - netxen_nic_update_cmd_consumer(adapter, 0); + netxen_nic_update_cmd_producer(adapter, 0); + netxen_nic_update_cmd_consumer(adapter, 0); + } for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) { for (ring = 0; ring < adapter->max_rds_rings; ring++) -- cgit v1.2.3 From 9ad27643f3a054dff9211bb9938f2323907c2ffe Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Fri, 1 Aug 2008 03:14:59 -0700 Subject: netxen: fix promisc mode, mtu setting For NX3031, multicast filtering, promisc mode, and max frame size setting is handled by firmware, driver needs to send request to enable/disable it. For old chip revisions / firmware, driver still sets it directly. Added function pointer to set mtu according to chip revision. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic.h | 35 +++++++++++++++- drivers/net/netxen/netxen_nic_ctx.c | 9 +++-- drivers/net/netxen/netxen_nic_hw.c | 77 ++++++++++++++++++++---------------- drivers/net/netxen/netxen_nic_hw.h | 13 +++--- drivers/net/netxen/netxen_nic_init.c | 5 +++ drivers/net/netxen/netxen_nic_main.c | 4 +- drivers/net/netxen/netxen_nic_niu.c | 4 +- 7 files changed, 94 insertions(+), 53 deletions(-) diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index 07a59dc83dba..93a7b9b668d5 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -1172,6 +1172,36 @@ typedef struct { nx_nic_intr_coalesce_data_t irq; } nx_nic_intr_coalesce_t; +#define NX_HOST_REQUEST 0x13 +#define NX_NIC_REQUEST 0x14 + +#define NX_MAC_EVENT 0x1 + +enum { + NX_NIC_H2C_OPCODE_START = 0, + NX_NIC_H2C_OPCODE_CONFIG_RSS, + NX_NIC_H2C_OPCODE_CONFIG_RSS_TBL, + NX_NIC_H2C_OPCODE_CONFIG_INTR_COALESCE, + NX_NIC_H2C_OPCODE_CONFIG_LED, + NX_NIC_H2C_OPCODE_CONFIG_PROMISCUOUS, + NX_NIC_H2C_OPCODE_CONFIG_L2_MAC, + NX_NIC_H2C_OPCODE_LRO_REQUEST, + NX_NIC_H2C_OPCODE_GET_SNMP_STATS, + NX_NIC_H2C_OPCODE_PROXY_START_REQUEST, + NX_NIC_H2C_OPCODE_PROXY_STOP_REQUEST, + NX_NIC_H2C_OPCODE_PROXY_SET_MTU, + NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE, + NX_H2P_OPCODE_GET_FINGER_PRINT_REQUEST, + NX_H2P_OPCODE_INSTALL_LICENSE_REQUEST, + NX_H2P_OPCODE_GET_LICENSE_CAPABILITY_REQUEST, + NX_NIC_H2C_OPCODE_GET_NET_STATS, + NX_NIC_H2C_OPCODE_LAST +}; + +#define VPORT_MISS_MODE_DROP 0 /* drop all unmatched */ +#define VPORT_MISS_MODE_ACCEPT_ALL 1 /* accept all packets */ +#define VPORT_MISS_MODE_ACCEPT_MULTI 2 /* accept unmatched multicast */ + typedef struct { u64 qhdr; u64 req_hdr; @@ -1290,7 +1320,7 @@ struct netxen_adapter { int (*disable_phy_interrupts) (struct netxen_adapter *); int (*macaddr_set) (struct netxen_adapter *, netxen_ethernet_macaddr_t); int (*set_mtu) (struct netxen_adapter *, int); - int (*set_promisc) (struct netxen_adapter *, netxen_niu_prom_mode_t); + int (*set_promisc) (struct netxen_adapter *, u32); int (*phy_read) (struct netxen_adapter *, long reg, u32 *); int (*phy_write) (struct netxen_adapter *, long reg, u32 val); int (*init_port) (struct netxen_adapter *, int); @@ -1467,9 +1497,10 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter); u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max); void netxen_p2_nic_set_multi(struct net_device *netdev); void netxen_p3_nic_set_multi(struct net_device *netdev); +int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32); int netxen_config_intr_coalesce(struct netxen_adapter *adapter); -u32 nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu); +int nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu); int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu); int netxen_nic_set_mac(struct net_device *netdev, void *p); diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c index 64babc59e699..64b51643c626 100644 --- a/drivers/net/netxen/netxen_nic_ctx.c +++ b/drivers/net/netxen/netxen_nic_ctx.c @@ -145,8 +145,8 @@ netxen_issue_cmd(struct netxen_adapter *adapter, return rcode; } -u32 -nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu) +int +nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu) { u32 rcode = NX_RCODE_SUCCESS; struct netxen_recv_context *recv_ctx = &adapter->recv_ctx[0]; @@ -160,7 +160,10 @@ nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu) 0, NX_CDRP_CMD_SET_MTU); - return rcode; + if (rcode != NX_RCODE_SUCCESS) + return -EIO; + + return 0; } static int diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index d0c6935881e7..4259f3fb899d 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -285,14 +285,7 @@ static unsigned crb_hub_agt[64] = #define ADDR_IN_RANGE(addr, low, high) \ (((addr) <= (high)) && ((addr) >= (low))) -#define NETXEN_MAX_MTU 8000 + NETXEN_ENET_HEADER_SIZE + NETXEN_ETH_FCS_SIZE -#define NETXEN_MIN_MTU 64 -#define NETXEN_ETH_FCS_SIZE 4 -#define NETXEN_ENET_HEADER_SIZE 14 #define NETXEN_WINDOW_ONE 0x2000000 /*CRB Window: bit 25 of CRB address */ -#define NETXEN_FIRMWARE_LEN ((16 * 1024) / 4) -#define NETXEN_NIU_HDRSIZE (0x1 << 6) -#define NETXEN_NIU_TLRSIZE (0x1 << 5) #define NETXEN_NIC_ZERO_PAUSE_ADDR 0ULL #define NETXEN_NIC_UNIT_PAUSE_ADDR 0x200ULL @@ -541,9 +534,6 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter, return 0; } -#define NIC_REQUEST 0x14 -#define NETXEN_MAC_EVENT 0x1 - static int nx_p3_sre_macaddr_change(struct net_device *dev, u8 *addr, unsigned op) { @@ -553,8 +543,8 @@ static int nx_p3_sre_macaddr_change(struct net_device *dev, int rv; memset(&req, 0, sizeof(nx_nic_req_t)); - req.qhdr |= (NIC_REQUEST << 23); - req.req_hdr |= NETXEN_MAC_EVENT; + req.qhdr |= (NX_NIC_REQUEST << 23); + req.req_hdr |= NX_MAC_EVENT; req.req_hdr |= ((u64)adapter->portnum << 16); mac_req.op = op; memcpy(&mac_req.mac_addr, addr, 6); @@ -575,31 +565,35 @@ void netxen_p3_nic_set_multi(struct net_device *netdev) nx_mac_list_t *cur, *next, *del_list, *add_list = NULL; struct dev_mc_list *mc_ptr; u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - - adapter->set_promisc(adapter, NETXEN_NIU_PROMISC_MODE); - - /* - * Programming mac addresses will automaticly enabling L2 filtering. - * HW will replace timestamp with L2 conid when L2 filtering is - * enabled. This causes problem for LSA. Do not enabling L2 filtering - * until that problem is fixed. - */ - if ((netdev->flags & IFF_PROMISC) || - (netdev->mc_count > adapter->max_mc_count)) - return; + u32 mode = VPORT_MISS_MODE_DROP; del_list = adapter->mac_list; adapter->mac_list = NULL; nx_p3_nic_add_mac(adapter, netdev->dev_addr, &add_list, &del_list); + nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list); + + if (netdev->flags & IFF_PROMISC) { + mode = VPORT_MISS_MODE_ACCEPT_ALL; + goto send_fw_cmd; + } + + if ((netdev->flags & IFF_ALLMULTI) || + (netdev->mc_count > adapter->max_mc_count)) { + mode = VPORT_MISS_MODE_ACCEPT_MULTI; + goto send_fw_cmd; + } + if (netdev->mc_count > 0) { - nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list); for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) { nx_p3_nic_add_mac(adapter, mc_ptr->dmi_addr, &add_list, &del_list); } } + +send_fw_cmd: + adapter->set_promisc(adapter, mode); for (cur = del_list; cur;) { nx_p3_sre_macaddr_change(netdev, cur->mac_addr, NETXEN_MAC_DEL); next = cur->next; @@ -615,6 +609,21 @@ void netxen_p3_nic_set_multi(struct net_device *netdev) } } +int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode) +{ + nx_nic_req_t req; + + memset(&req, 0, sizeof(nx_nic_req_t)); + + req.qhdr |= (NX_HOST_REQUEST << 23); + req.req_hdr |= NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE; + req.req_hdr |= ((u64)adapter->portnum << 16); + req.words[0] = cpu_to_le64(mode); + + return netxen_send_cmd_descs(adapter, + (struct cmd_desc_type0 *)&req, 1); +} + #define NETXEN_CONFIG_INTR_COALESCE 3 /* @@ -627,7 +636,7 @@ int netxen_config_intr_coalesce(struct netxen_adapter *adapter) memset(&req, 0, sizeof(nx_nic_req_t)); - req.qhdr |= (NIC_REQUEST << 23); + req.qhdr |= (NX_NIC_REQUEST << 23); req.req_hdr |= NETXEN_CONFIG_INTR_COALESCE; req.req_hdr |= ((u64)adapter->portnum << 16); @@ -653,6 +662,7 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu) { struct netxen_adapter *adapter = netdev_priv(netdev); int max_mtu; + int rc = 0; if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) max_mtu = P3_MAX_MTU; @@ -666,16 +676,12 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu) } if (adapter->set_mtu) - adapter->set_mtu(adapter, mtu); - netdev->mtu = mtu; + rc = adapter->set_mtu(adapter, mtu); - mtu += MTU_FUDGE_FACTOR; - if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) - nx_fw_cmd_set_mtu(adapter, mtu); - else if (adapter->set_mtu) - adapter->set_mtu(adapter, mtu); + if (!rc) + netdev->mtu = mtu; - return 0; + return rc; } int netxen_is_flash_supported(struct netxen_adapter *adapter) @@ -2047,6 +2053,7 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter) int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu) { + new_mtu += MTU_FUDGE_FACTOR; netxen_nic_write_w0(adapter, NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port), new_mtu); @@ -2055,7 +2062,7 @@ int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu) int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu) { - new_mtu += NETXEN_NIU_HDRSIZE + NETXEN_NIU_TLRSIZE; + new_mtu += MTU_FUDGE_FACTOR; if (adapter->physical_port == 0) netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE, new_mtu); diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h index b8e0030f03d7..aae737dc77a8 100644 --- a/drivers/net/netxen/netxen_nic_hw.h +++ b/drivers/net/netxen/netxen_nic_hw.h @@ -419,12 +419,9 @@ typedef enum { #define netxen_get_niu_enable_ge(config_word) \ _netxen_crb_get_bit(config_word, 1) -/* Promiscous mode options (GbE mode only) */ -typedef enum { - NETXEN_NIU_PROMISC_MODE = 0, - NETXEN_NIU_NON_PROMISC_MODE, - NETXEN_NIU_ALLMULTI_MODE -} netxen_niu_prom_mode_t; +#define NETXEN_NIU_NON_PROMISC_MODE 0 +#define NETXEN_NIU_PROMISC_MODE 1 +#define NETXEN_NIU_ALLMULTI_MODE 2 /* * NIU GB Drop CRC Register @@ -471,9 +468,9 @@ typedef enum { /* Set promiscuous mode for a GbE interface */ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, - netxen_niu_prom_mode_t mode); + u32 mode); int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter, - netxen_niu_prom_mode_t mode); + u32 mode); /* set the MAC address for a given MAC */ int netxen_niu_macaddr_set(struct netxen_adapter *adapter, diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 01ab31b34a85..519fc860e17e 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -364,6 +364,11 @@ void netxen_initialize_adapter_ops(struct netxen_adapter *adapter) default: break; } + + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) { + adapter->set_mtu = nx_fw_cmd_set_mtu; + adapter->set_promisc = netxen_p3_nic_set_promisc; + } } /* diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 311a4bdfa855..7615c715e66e 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1113,9 +1113,7 @@ static int netxen_nic_open(struct net_device *netdev) netxen_nic_set_link_parameters(adapter); netdev->set_multicast_list(netdev); - if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) - nx_fw_cmd_set_mtu(adapter, netdev->mtu); - else + if (adapter->set_mtu) adapter->set_mtu(adapter, netdev->mtu); mod_timer(&adapter->watchdog_timer, jiffies); diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c index c9493e2df200..27f07f6a45b1 100644 --- a/drivers/net/netxen/netxen_nic_niu.c +++ b/drivers/net/netxen/netxen_nic_niu.c @@ -764,7 +764,7 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter) /* Set promiscuous mode for a GbE interface */ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, - netxen_niu_prom_mode_t mode) + u32 mode) { __u32 reg; u32 port = adapter->physical_port; @@ -906,7 +906,7 @@ int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter, #endif /* 0 */ int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter, - netxen_niu_prom_mode_t mode) + u32 mode) { __u32 reg; u32 port = adapter->physical_port; -- cgit v1.2.3 From 49ef26eb8dc76531b197b591072c403f0e6ec598 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Thu, 31 Jul 2008 13:46:04 -0700 Subject: qla3xxx: fix: Remove unused set_multicast function. This device is one side of a two-function adapter (NIC and iSCSI). Promiscuous mode setting/clearing is not allowed from the NIC side. Signed-off-by: Ron Mercer Signed-off-by: Jeff Garzik --- drivers/net/qla3xxx.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index e82b37bbd6c3..763169f9299f 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -3730,14 +3730,6 @@ static int ql3xxx_open(struct net_device *ndev) return (ql_adapter_up(qdev)); } -static void ql3xxx_set_multicast_list(struct net_device *ndev) -{ - /* - * We are manually parsing the list in the net_device structure. - */ - return; -} - static int ql3xxx_set_mac_address(struct net_device *ndev, void *p) { struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev); @@ -4007,7 +3999,11 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev, ndev->open = ql3xxx_open; ndev->hard_start_xmit = ql3xxx_send; ndev->stop = ql3xxx_close; - ndev->set_multicast_list = ql3xxx_set_multicast_list; + /* ndev->set_multicast_list + * This device is one side of a two-function adapter + * (NIC and iSCSI). Promiscuous mode setting/clearing is + * not allowed from the NIC side. + */ SET_ETHTOOL_OPS(ndev, &ql3xxx_ethtool_ops); ndev->set_mac_address = ql3xxx_set_mac_address; ndev->tx_timeout = ql3xxx_tx_timeout; -- cgit v1.2.3 From eb115b00992ed21fb8734cbee45d46d37f4010ce Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Thu, 31 Jul 2008 13:46:05 -0700 Subject: qla3xxx: fix: Fix IFF_MULTICAST setting. The driver was erroneously clearing this bit though the hardware supports multicast. Signed-off-by: Ron Mercer Signed-off-by: Jeff Garzik --- drivers/net/qla3xxx.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 763169f9299f..51aa027a5099 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -4036,9 +4036,6 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev, ndev->tx_queue_len = NUM_REQ_Q_ENTRIES; - /* Turn off support for multicasting */ - ndev->flags &= ~IFF_MULTICAST; - /* Record PCI bus information. */ ql_get_board_info(qdev); -- cgit v1.2.3 From 6bc0ed97d5ddb49248cfb76827d72557f4bd0aae Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Thu, 31 Jul 2008 13:46:06 -0700 Subject: qla3xxx: cleanup: Remove some unused defined constants in the header file. Signed-off-by: Ron Mercer Signed-off-by: Jeff Garzik --- drivers/net/qla3xxx.h | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h index 58a086fddec6..e0655f996610 100644 --- a/drivers/net/qla3xxx.h +++ b/drivers/net/qla3xxx.h @@ -14,19 +14,11 @@ #define OPCODE_OB_MAC_IOCB_FN0 0x01 #define OPCODE_OB_MAC_IOCB_FN2 0x21 -#define OPCODE_OB_TCP_IOCB_FN0 0x03 -#define OPCODE_OB_TCP_IOCB_FN2 0x23 -#define OPCODE_UPDATE_NCB_IOCB_FN0 0x00 -#define OPCODE_UPDATE_NCB_IOCB_FN2 0x20 -#define OPCODE_UPDATE_NCB_IOCB 0xF0 #define OPCODE_IB_MAC_IOCB 0xF9 #define OPCODE_IB_3032_MAC_IOCB 0x09 #define OPCODE_IB_IP_IOCB 0xFA #define OPCODE_IB_3032_IP_IOCB 0x0A -#define OPCODE_IB_TCP_IOCB 0xFB -#define OPCODE_DUMP_PROTO_IOCB 0xFE -#define OPCODE_BUFFER_ALERT_IOCB 0xFB #define OPCODE_FUNC_ID_MASK 0x30 #define OUTBOUND_MAC_IOCB 0x01 /* plus function bits */ -- cgit v1.2.3 From 4ea0d6e5b8dc6c46c1a981e971fa0b78bfe6e5d3 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Thu, 31 Jul 2008 13:46:07 -0700 Subject: qla3xxx: cleanup: Remove some unused structure definitions and structure elements. Signed-off-by: Ron Mercer Signed-off-by: Jeff Garzik --- drivers/net/qla3xxx.c | 4 --- drivers/net/qla3xxx.h | 97 --------------------------------------------------- 2 files changed, 101 deletions(-) diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 51aa027a5099..7d0e83f42154 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -3495,8 +3495,6 @@ static void ql_set_mac_info(struct ql3_adapter *qdev) case ISP_CONTROL_FN0_NET: qdev->mac_index = 0; qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number; - qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number; - qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number; qdev->mb_bit_mask = FN0_MA_BITS_MASK; qdev->PHYAddr = PORT0_PHY_ADDRESS; if (port_status & PORT_STATUS_SM0) @@ -3508,8 +3506,6 @@ static void ql_set_mac_info(struct ql3_adapter *qdev) case ISP_CONTROL_FN1_NET: qdev->mac_index = 1; qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number; - qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number; - qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number; qdev->mb_bit_mask = FN1_MA_BITS_MASK; qdev->PHYAddr = PORT1_PHY_ADDRESS; if (port_status & PORT_STATUS_SM1) diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h index e0655f996610..7113e71b15a1 100644 --- a/drivers/net/qla3xxx.h +++ b/drivers/net/qla3xxx.h @@ -22,8 +22,6 @@ #define OPCODE_FUNC_ID_MASK 0x30 #define OUTBOUND_MAC_IOCB 0x01 /* plus function bits */ -#define OUTBOUND_TCP_IOCB 0x03 /* plus function bits */ -#define UPDATE_NCB_IOCB 0x00 /* plus function bits */ #define FN0_MA_BITS_MASK 0x00 #define FN1_MA_BITS_MASK 0x80 @@ -151,75 +149,6 @@ struct ob_ip_iocb_rsp { __le32 reserved2; }; -struct ob_tcp_iocb_req { - u8 opcode; - - u8 flags0; -#define OB_TCP_IOCB_REQ_P 0x80 -#define OB_TCP_IOCB_REQ_CI 0x20 -#define OB_TCP_IOCB_REQ_H 0x10 -#define OB_TCP_IOCB_REQ_LN 0x08 -#define OB_TCP_IOCB_REQ_K 0x04 -#define OB_TCP_IOCB_REQ_D 0x02 -#define OB_TCP_IOCB_REQ_I 0x01 - - u8 flags1; -#define OB_TCP_IOCB_REQ_OSM 0x40 -#define OB_TCP_IOCB_REQ_URG 0x20 -#define OB_TCP_IOCB_REQ_ACK 0x10 -#define OB_TCP_IOCB_REQ_PSH 0x08 -#define OB_TCP_IOCB_REQ_RST 0x04 -#define OB_TCP_IOCB_REQ_SYN 0x02 -#define OB_TCP_IOCB_REQ_FIN 0x01 - - u8 options_len; -#define OB_TCP_IOCB_REQ_OMASK 0xF0 -#define OB_TCP_IOCB_REQ_SHIFT 4 - - __le32 transaction_id; - __le32 data_len; - __le32 hncb_ptr_low; - __le32 hncb_ptr_high; - __le32 buf_addr0_low; - __le32 buf_addr0_high; - __le32 buf_0_len; - __le32 buf_addr1_low; - __le32 buf_addr1_high; - __le32 buf_1_len; - __le32 buf_addr2_low; - __le32 buf_addr2_high; - __le32 buf_2_len; - __le32 time_stamp; - __le32 reserved1; -}; - -struct ob_tcp_iocb_rsp { - u8 opcode; - - u8 flags0; -#define OB_TCP_IOCB_RSP_C 0x20 -#define OB_TCP_IOCB_RSP_H 0x10 -#define OB_TCP_IOCB_RSP_LN 0x08 -#define OB_TCP_IOCB_RSP_K 0x04 -#define OB_TCP_IOCB_RSP_D 0x02 -#define OB_TCP_IOCB_RSP_I 0x01 - - u8 flags1; -#define OB_TCP_IOCB_RSP_E 0x10 -#define OB_TCP_IOCB_RSP_W 0x08 -#define OB_TCP_IOCB_RSP_P 0x04 -#define OB_TCP_IOCB_RSP_T 0x02 -#define OB_TCP_IOCB_RSP_F 0x01 - - u8 state; -#define OB_TCP_IOCB_RSP_SMASK 0xF0 -#define OB_TCP_IOCB_RSP_SHIFT 4 - - __le32 transaction_id; - __le32 local_ncb_ptr; - __le32 reserved0; -}; - struct ib_ip_iocb_rsp { u8 opcode; #define IB_IP_IOCB_RSP_3032_V 0x80 @@ -248,25 +177,6 @@ struct ib_ip_iocb_rsp { __le32 ial_high; }; -struct ib_tcp_iocb_rsp { - u8 opcode; - u8 flags; -#define IB_TCP_IOCB_RSP_P 0x80 -#define IB_TCP_IOCB_RSP_T 0x40 -#define IB_TCP_IOCB_RSP_D 0x20 -#define IB_TCP_IOCB_RSP_N 0x10 -#define IB_TCP_IOCB_RSP_IP 0x03 -#define IB_TCP_FLAG_MASK 0xf0 -#define IB_TCP_FLAG_IOCB_SYN 0x00 - -#define TCP_IB_RSP_FLAGS(x) (x->flags & ~IB_TCP_FLAG_MASK) - - __le16 length; - __le32 hncb_ref_num; - __le32 ial_low; - __le32 ial_high; -}; - struct net_rsp_iocb { u8 opcode; u8 flags; @@ -1258,20 +1168,13 @@ struct ql3_adapter { u32 small_buf_release_cnt; u32 small_buf_total_size; - /* ISR related, saves status for DPC. */ - u32 control_status; - struct eeprom_data nvram_data; - struct timer_list ioctl_timer; u32 port_link_state; - u32 last_rsp_offset; /* 4022 specific */ u32 mac_index; /* Driver's MAC number can be 0 or 1 for first and second networking functions respectively */ u32 PHYAddr; /* Address of PHY 0x1e00 Port 0 and 0x1f00 Port 1 */ u32 mac_ob_opcode; /* Opcode to use on mac transmission */ - u32 tcp_ob_opcode; /* Opcode to use on tcp transmission */ - u32 update_ob_opcode; /* Opcode to use for updating NCB */ u32 mb_bit_mask; /* MA Bits mask to use on transmission */ u32 numPorts; struct workqueue_struct *workqueue; -- cgit v1.2.3 From b08c42b283141d1a79fb748d258dcd1da8baa32e Mon Sep 17 00:00:00 2001 From: root Date: Thu, 31 Jul 2008 13:46:08 -0700 Subject: qla3xxx: driver version change. Signed-off-by: Ron Mercer Signed-off-by: Jeff Garzik --- drivers/net/qla3xxx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 7d0e83f42154..3cdd07c45b6d 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -38,7 +38,7 @@ #define DRV_NAME "qla3xxx" #define DRV_STRING "QLogic ISP3XXX Network Driver" -#define DRV_VERSION "v2.03.00-k4" +#define DRV_VERSION "v2.03.00-k5" #define PFX DRV_NAME " " static const char ql3xxx_driver_name[] = DRV_NAME; -- cgit v1.2.3 From 0b1ab1b8a4f663a34c23f31d796fd08283b6077a Mon Sep 17 00:00:00 2001 From: Eduardo Habkost Date: Thu, 31 Jul 2008 17:36:55 -0300 Subject: xen-netfront: use netif_start_queue() on xennet_open() xen-netfront never called netif_start_queue() and was was waking the queue on xennet_open(), triggering the BUG_ON() on __netif_schedule(). Signed-off-by: Eduardo Habkost Signed-off-by: Jeff Garzik --- drivers/net/xen-netfront.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 902bbe788215..c749bdba214c 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -329,7 +329,7 @@ static int xennet_open(struct net_device *dev) } spin_unlock_bh(&np->rx_lock); - xennet_maybe_wake_tx(dev); + netif_start_queue(dev); return 0; } -- cgit v1.2.3 From d91d4bb9db4a7b2a78accff3560bfd42988c56e4 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 31 Jul 2008 01:14:24 +0200 Subject: METH: fix MAC address setup Setup of the mac filter lost the upper 16bit of the mac address. This bug got unconvered by a patch, which fixed the promiscous handling. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Jeff Garzik --- drivers/net/meth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/meth.c b/drivers/net/meth.c index 4cb364e67dc6..0a97c26df6ab 100644 --- a/drivers/net/meth.c +++ b/drivers/net/meth.c @@ -100,7 +100,7 @@ static inline void load_eaddr(struct net_device *dev) DPRINTK("Loading MAC Address: %s\n", print_mac(mac, dev->dev_addr)); macaddr = 0; for (i = 0; i < 6; i++) - macaddr |= dev->dev_addr[i] << ((5 - i) * 8); + macaddr |= (u64)dev->dev_addr[i] << ((5 - i) * 8); mace->eth.mac_addr = macaddr; } -- cgit v1.2.3 From 71557a37adb5df17631c493b3b7d912938c720b2 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Wed, 6 Aug 2008 19:49:00 -0400 Subject: [netdrvr] sh_eth: Add SH7619 support Add support SH7619 Internal ethernet controler. Signed-off-by: Yoshinori Sato Signed-off-by: Jeff Garzik --- arch/sh/include/asm/sh_eth.h | 11 +++++++ drivers/net/Kconfig | 5 ++-- drivers/net/sh_eth.c | 69 ++++++++++++++++++++++++++++++++------------ drivers/net/sh_eth.h | 22 +++++++++++--- 4 files changed, 82 insertions(+), 25 deletions(-) create mode 100644 arch/sh/include/asm/sh_eth.h diff --git a/arch/sh/include/asm/sh_eth.h b/arch/sh/include/asm/sh_eth.h new file mode 100644 index 000000000000..bb832584f3c1 --- /dev/null +++ b/arch/sh/include/asm/sh_eth.h @@ -0,0 +1,11 @@ +#ifndef __ASM_SH_ETH_H__ +#define __ASM_SH_ETH_H__ + +enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN}; + +struct sh_eth_plat_data { + int phy; + int edmac_endian; +}; + +#endif diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8a03875ec877..4b4cb2bf4f11 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -510,14 +510,15 @@ config STNIC config SH_ETH tristate "Renesas SuperH Ethernet support" depends on SUPERH && \ - (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763) + (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763 || \ + CPU_SUBTYPE_SH7619) select CRC32 select MII select MDIO_BITBANG select PHYLIB help Renesas SuperH Ethernet device driver. - This driver support SH7710, SH7712 and SH7763. + This driver support SH7710, SH7712, SH7763 and SH7619. config SUNLANCE tristate "Sun LANCE support" diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 6a06b9503e4f..25e62cf58d3a 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -34,6 +34,29 @@ #include "sh_eth.h" +/* CPU <-> EDMAC endian convert */ +static inline __u32 cpu_to_edmac(struct sh_eth_private *mdp, u32 x) +{ + switch (mdp->edmac_endian) { + case EDMAC_LITTLE_ENDIAN: + return cpu_to_le32(x); + case EDMAC_BIG_ENDIAN: + return cpu_to_be32(x); + } + return x; +} + +static inline __u32 edmac_to_cpu(struct sh_eth_private *mdp, u32 x) +{ + switch (mdp->edmac_endian) { + case EDMAC_LITTLE_ENDIAN: + return le32_to_cpu(x); + case EDMAC_BIG_ENDIAN: + return be32_to_cpu(x); + } + return x; +} + /* * Program the hardware MAC address from dev->dev_addr. */ @@ -240,7 +263,7 @@ static void sh_eth_ring_format(struct net_device *ndev) /* RX descriptor */ rxdesc = &mdp->rx_ring[i]; rxdesc->addr = (u32)skb->data & ~0x3UL; - rxdesc->status = cpu_to_le32(RD_RACT | RD_RFP); + rxdesc->status = cpu_to_edmac(mdp, RD_RACT | RD_RFP); /* The size of the buffer is 16 byte boundary. */ rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F; @@ -262,7 +285,7 @@ static void sh_eth_ring_format(struct net_device *ndev) mdp->dirty_rx = (u32) (i - RX_RING_SIZE); /* Mark the last entry as wrapping the ring. */ - rxdesc->status |= cpu_to_le32(RD_RDEL); + rxdesc->status |= cpu_to_edmac(mdp, RD_RDEL); memset(mdp->tx_ring, 0, tx_ringsize); @@ -270,10 +293,10 @@ static void sh_eth_ring_format(struct net_device *ndev) for (i = 0; i < TX_RING_SIZE; i++) { mdp->tx_skbuff[i] = NULL; txdesc = &mdp->tx_ring[i]; - txdesc->status = cpu_to_le32(TD_TFP); + txdesc->status = cpu_to_edmac(mdp, TD_TFP); txdesc->buffer_length = 0; if (i == 0) { - /* Rx descriptor address set */ + /* Tx descriptor address set */ ctrl_outl((u32)txdesc, ioaddr + TDLAR); #if defined(CONFIG_CPU_SUBTYPE_SH7763) ctrl_outl((u32)txdesc, ioaddr + TDFAR); @@ -281,13 +304,13 @@ static void sh_eth_ring_format(struct net_device *ndev) } } - /* Rx descriptor address set */ + /* Tx descriptor address set */ #if defined(CONFIG_CPU_SUBTYPE_SH7763) ctrl_outl((u32)txdesc, ioaddr + TDFXR); ctrl_outl(0x1, ioaddr + TDFFR); #endif - txdesc->status |= cpu_to_le32(TD_TDLE); + txdesc->status |= cpu_to_edmac(mdp, TD_TDLE); } /* Get skb and descriptor buffer */ @@ -455,7 +478,7 @@ static int sh_eth_txfree(struct net_device *ndev) for (; mdp->cur_tx - mdp->dirty_tx > 0; mdp->dirty_tx++) { entry = mdp->dirty_tx % TX_RING_SIZE; txdesc = &mdp->tx_ring[entry]; - if (txdesc->status & cpu_to_le32(TD_TACT)) + if (txdesc->status & cpu_to_edmac(mdp, TD_TACT)) break; /* Free the original skb. */ if (mdp->tx_skbuff[entry]) { @@ -463,9 +486,9 @@ static int sh_eth_txfree(struct net_device *ndev) mdp->tx_skbuff[entry] = NULL; freeNum++; } - txdesc->status = cpu_to_le32(TD_TFP); + txdesc->status = cpu_to_edmac(mdp, TD_TFP); if (entry >= TX_RING_SIZE - 1) - txdesc->status |= cpu_to_le32(TD_TDLE); + txdesc->status |= cpu_to_edmac(mdp, TD_TDLE); mdp->stats.tx_packets++; mdp->stats.tx_bytes += txdesc->buffer_length; @@ -486,8 +509,8 @@ static int sh_eth_rx(struct net_device *ndev) u32 desc_status, reserve = 0; rxdesc = &mdp->rx_ring[entry]; - while (!(rxdesc->status & cpu_to_le32(RD_RACT))) { - desc_status = le32_to_cpu(rxdesc->status); + while (!(rxdesc->status & cpu_to_edmac(mdp, RD_RACT))) { + desc_status = edmac_to_cpu(mdp, rxdesc->status); pkt_len = rxdesc->frame_length; if (--boguscnt < 0) @@ -522,7 +545,7 @@ static int sh_eth_rx(struct net_device *ndev) mdp->stats.rx_packets++; mdp->stats.rx_bytes += pkt_len; } - rxdesc->status |= cpu_to_le32(RD_RACT); + rxdesc->status |= cpu_to_edmac(mdp, RD_RACT); entry = (++mdp->cur_rx) % RX_RING_SIZE; } @@ -552,10 +575,10 @@ static int sh_eth_rx(struct net_device *ndev) } if (entry >= RX_RING_SIZE - 1) rxdesc->status |= - cpu_to_le32(RD_RACT | RD_RFP | RD_RDEL); + cpu_to_edmac(mdp, RD_RACT | RD_RFP | RD_RDEL); else rxdesc->status |= - cpu_to_le32(RD_RACT | RD_RFP); + cpu_to_edmac(mdp, RD_RACT | RD_RFP); } /* Restart Rx engine if stopped. */ @@ -931,9 +954,9 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev) txdesc->buffer_length = skb->len; if (entry >= TX_RING_SIZE - 1) - txdesc->status |= cpu_to_le32(TD_TACT | TD_TDLE); + txdesc->status |= cpu_to_edmac(mdp, TD_TACT | TD_TDLE); else - txdesc->status |= cpu_to_le32(TD_TACT); + txdesc->status |= cpu_to_edmac(mdp, TD_TACT); mdp->cur_tx++; @@ -1159,6 +1182,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev) struct resource *res; struct net_device *ndev = NULL; struct sh_eth_private *mdp; + struct sh_eth_plat_data *pd; /* get base addr */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1196,8 +1220,11 @@ static int sh_eth_drv_probe(struct platform_device *pdev) mdp = netdev_priv(ndev); spin_lock_init(&mdp->lock); + pd = (struct sh_eth_plat_data *)(pdev->dev.platform_data); /* get PHY ID */ - mdp->phy_id = (int)pdev->dev.platform_data; + mdp->phy_id = pd->phy; + /* EDMAC endian */ + mdp->edmac_endian = pd->edmac_endian; /* set function */ ndev->open = sh_eth_open; @@ -1217,12 +1244,16 @@ static int sh_eth_drv_probe(struct platform_device *pdev) /* First device only init */ if (!devno) { +#if defined(ARSTR) /* reset device */ ctrl_outl(ARSTR_ARSTR, ARSTR); mdelay(1); +#endif +#if defined(SH_TSU_ADDR) /* TSU init (Init only)*/ sh_eth_tsu_init(SH_TSU_ADDR); +#endif } /* network device register */ @@ -1240,8 +1271,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev) ndev->name, CARDNAME, (u32) ndev->base_addr); for (i = 0; i < 5; i++) - printk(KERN_INFO "%02X:", ndev->dev_addr[i]); - printk(KERN_INFO "%02X, IRQ %d.\n", ndev->dev_addr[i], ndev->irq); + printk("%02X:", ndev->dev_addr[i]); + printk("%02X, IRQ %d.\n", ndev->dev_addr[i], ndev->irq); platform_set_drvdata(pdev, ndev); diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h index 45ad1b09ca5a..73bc7181cc18 100644 --- a/drivers/net/sh_eth.h +++ b/drivers/net/sh_eth.h @@ -30,6 +30,8 @@ #include #include +#include + #define CARDNAME "sh-eth" #define TX_TIMEOUT (5*HZ) #define TX_RING_SIZE 64 /* Tx ring size */ @@ -143,10 +145,11 @@ #else /* CONFIG_CPU_SUBTYPE_SH7763 */ # define RX_OFFSET 2 /* skb offset */ +#ifndef CONFIG_CPU_SUBTYPE_SH7619 /* Chip base address */ # define SH_TSU_ADDR 0xA7000804 # define ARSTR 0xA7000800 - +#endif /* Chip Registers */ /* E-DMAC */ # define EDMR 0x0000 @@ -384,7 +387,11 @@ enum FCFTR_BIT { FCFTR_RFD1 = 0x00000002, FCFTR_RFD0 = 0x00000001, }; #define FIFO_F_D_RFF (FCFTR_RFF2|FCFTR_RFF1|FCFTR_RFF0) +#ifndef CONFIG_CPU_SUBTYPE_SH7619 #define FIFO_F_D_RFD (FCFTR_RFD2|FCFTR_RFD1|FCFTR_RFD0) +#else +#define FIFO_F_D_RFD (FCFTR_RFD0) +#endif /* Transfer descriptor bit */ enum TD_STS_BIT { @@ -414,8 +421,10 @@ enum FELIC_MODE_BIT { #ifdef CONFIG_CPU_SUBTYPE_SH7763 #define ECMR_CHG_DM (ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF |\ ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT) +#elif CONFIG_CPU_SUBTYPE_SH7619 +#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF) #else -#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR ECMR_RXF | ECMR_TXF | ECMR_MCT) +#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT) #endif /* ECSR */ @@ -485,7 +494,11 @@ enum RPADIR_BIT { /* FDR */ enum FIFO_SIZE_BIT { +#ifndef CONFIG_CPU_SUBTYPE_SH7619 FIFO_SIZE_T = 0x00000700, FIFO_SIZE_R = 0x00000007, +#else + FIFO_SIZE_T = 0x00000100, FIFO_SIZE_R = 0x00000001, +#endif }; enum phy_offsets { PHY_CTRL = 0, PHY_STAT = 1, PHY_IDT1 = 2, PHY_IDT2 = 3, @@ -601,7 +614,7 @@ struct sh_eth_txdesc { #endif u32 addr; /* TD2 */ u32 pad1; /* padding data */ -}; +} __attribute__((aligned(2), packed)); /* * The sh ether Rx buffer descriptors. @@ -618,7 +631,7 @@ struct sh_eth_rxdesc { #endif u32 addr; /* RD2 */ u32 pad0; /* padding data */ -}; +} __attribute__((aligned(2), packed)); struct sh_eth_private { dma_addr_t rx_desc_dma; @@ -633,6 +646,7 @@ struct sh_eth_private { u32 cur_rx, dirty_rx; /* Producer/consumer ring indices */ u32 cur_tx, dirty_tx; u32 rx_buf_sz; /* Based on MTU+slack. */ + int edmac_endian; /* MII transceiver section. */ u32 phy_id; /* PHY ID */ struct mii_bus *mii_bus; /* MDIO bus control */ -- cgit v1.2.3 From 057b61afca098d3ad3d9e8d15914bc9f9315e425 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Sat, 2 Aug 2008 15:55:11 -0300 Subject: drivers/net: Remove 'return' of void function NS8390p_init() We don't need this into a void function. Signed-off-by: Gustavo F. Padovan Signed-off-by: Jeff Garzik --- drivers/net/8390p.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/8390p.c b/drivers/net/8390p.c index 71f19884c4b1..fd46f6cd4311 100644 --- a/drivers/net/8390p.c +++ b/drivers/net/8390p.c @@ -39,7 +39,7 @@ struct net_device *__alloc_eip_netdev(int size) void NS8390p_init(struct net_device *dev, int startp) { - return __NS8390_init(dev, startp); + __NS8390_init(dev, startp); } EXPORT_SYMBOL(eip_open); -- cgit v1.2.3 From caa1687c0123705182dc0388304a4c9b78fcf41c Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Sat, 2 Aug 2008 15:55:12 -0300 Subject: drivers/net: coding styles fixes to drivers/net/8390p.c Fix all errors and warnings reported by checkpatch.pl Signed-off-by: Gustavo F. Padovan Signed-off-by: Jeff Garzik --- drivers/net/8390p.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/net/8390p.c b/drivers/net/8390p.c index fd46f6cd4311..4c6eea4611a2 100644 --- a/drivers/net/8390p.c +++ b/drivers/net/8390p.c @@ -4,9 +4,9 @@ static const char version[] = "8390p.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; #define ei_inb(_p) inb(_p) -#define ei_outb(_v,_p) outb(_v,_p) +#define ei_outb(_v, _p) outb(_v, _p) #define ei_inb_p(_p) inb_p(_p) -#define ei_outb_p(_v,_p) outb_p(_v,_p) +#define ei_outb_p(_v, _p) outb_p(_v, _p) #include "lib8390.c" @@ -14,42 +14,39 @@ int eip_open(struct net_device *dev) { return __ei_open(dev); } +EXPORT_SYMBOL(eip_open); int eip_close(struct net_device *dev) { return __ei_close(dev); } +EXPORT_SYMBOL(eip_close); irqreturn_t eip_interrupt(int irq, void *dev_id) { return __ei_interrupt(irq, dev_id); } +EXPORT_SYMBOL(eip_interrupt); #ifdef CONFIG_NET_POLL_CONTROLLER void eip_poll(struct net_device *dev) { __ei_poll(dev); } +EXPORT_SYMBOL(eip_poll); #endif struct net_device *__alloc_eip_netdev(int size) { return ____alloc_ei_netdev(size); } +EXPORT_SYMBOL(__alloc_eip_netdev); void NS8390p_init(struct net_device *dev, int startp) { __NS8390_init(dev, startp); } - -EXPORT_SYMBOL(eip_open); -EXPORT_SYMBOL(eip_close); -EXPORT_SYMBOL(eip_interrupt); -#ifdef CONFIG_NET_POLL_CONTROLLER -EXPORT_SYMBOL(eip_poll); -#endif EXPORT_SYMBOL(NS8390p_init); -EXPORT_SYMBOL(__alloc_eip_netdev); #if defined(MODULE) -- cgit v1.2.3 From 11795aa4f89cf68e7aafc8a606feee14c97a12e5 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Sat, 2 Aug 2008 15:55:13 -0300 Subject: drivers/net: coding styles fixes to drivers/net/8390.c Fix all errors and warnings reported by checkpatch.pl Signed-off-by: Gustavo F. Padovan Signed-off-by: Jeff Garzik --- drivers/net/8390.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/net/8390.c b/drivers/net/8390.c index dc5d2584bd0c..f72a2e87d569 100644 --- a/drivers/net/8390.c +++ b/drivers/net/8390.c @@ -9,42 +9,39 @@ int ei_open(struct net_device *dev) { return __ei_open(dev); } +EXPORT_SYMBOL(ei_open); int ei_close(struct net_device *dev) { return __ei_close(dev); } +EXPORT_SYMBOL(ei_close); irqreturn_t ei_interrupt(int irq, void *dev_id) { return __ei_interrupt(irq, dev_id); } +EXPORT_SYMBOL(ei_interrupt); #ifdef CONFIG_NET_POLL_CONTROLLER void ei_poll(struct net_device *dev) { __ei_poll(dev); } +EXPORT_SYMBOL(ei_poll); #endif struct net_device *__alloc_ei_netdev(int size) { return ____alloc_ei_netdev(size); } +EXPORT_SYMBOL(__alloc_ei_netdev); void NS8390_init(struct net_device *dev, int startp) { __NS8390_init(dev, startp); } - -EXPORT_SYMBOL(ei_open); -EXPORT_SYMBOL(ei_close); -EXPORT_SYMBOL(ei_interrupt); -#ifdef CONFIG_NET_POLL_CONTROLLER -EXPORT_SYMBOL(ei_poll); -#endif EXPORT_SYMBOL(NS8390_init); -EXPORT_SYMBOL(__alloc_ei_netdev); #if defined(MODULE) -- cgit v1.2.3 From 5608784fdf417467cbb2ccfb1129500464416f79 Mon Sep 17 00:00:00 2001 From: Eugene Teo Date: Wed, 30 Jul 2008 12:38:59 -0700 Subject: hamradio: add missing sanity check to tty operation Add missing sanity check to tty operation. Acked-by: Alan Cox Signed-off-by: Eugene Teo Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/hamradio/mkiss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 3249df5e0f17..b8e25c4624d2 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -548,7 +548,7 @@ static int ax_xmit(struct sk_buff *skb, struct net_device *dev) } printk(KERN_ERR "mkiss: %s: transmit timed out, %s?\n", dev->name, - (ax->tty->ops->chars_in_buffer(ax->tty) || ax->xleft) ? + (tty_chars_in_buffer(ax->tty) || ax->xleft) ? "bad line quality" : "driver error"); ax->xleft = 0; -- cgit v1.2.3 From 11a859e591befae7413505c68dd241ad8e14748c Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 30 Jul 2008 12:50:12 -0700 Subject: drivers/net/netxen/netxen_nic_hw.c: fix printk warnings drivers/net/netxen/netxen_nic_hw.c: In function 'netxen_nic_pci_mem_read_direct': drivers/net/netxen/netxen_nic_hw.c:1414: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'u64' drivers/net/netxen/netxen_nic_hw.c: In function 'netxen_nic_pci_mem_write_direct': drivers/net/netxen/netxen_nic_hw.c:1487: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'u64' You don't know what type was used for u64 hence they cannot be printed without casting. Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic_hw.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 4259f3fb899d..9aa20f961618 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -1417,7 +1417,8 @@ static int netxen_nic_pci_mem_read_direct(struct netxen_adapter *adapter, (netxen_nic_pci_is_same_window(adapter, off+size-1) == 0)) { write_unlock_irqrestore(&adapter->adapter_lock, flags); printk(KERN_ERR "%s out of bound pci memory access. " - "offset is 0x%llx\n", netxen_nic_driver_name, off); + "offset is 0x%llx\n", netxen_nic_driver_name, + (unsigned long long)off); return -1; } @@ -1490,7 +1491,8 @@ netxen_nic_pci_mem_write_direct(struct netxen_adapter *adapter, u64 off, (netxen_nic_pci_is_same_window(adapter, off+size-1) == 0)) { write_unlock_irqrestore(&adapter->adapter_lock, flags); printk(KERN_ERR "%s out of bound pci memory access. " - "offset is 0x%llx\n", netxen_nic_driver_name, off); + "offset is 0x%llx\n", netxen_nic_driver_name, + (unsigned long long)off); return -1; } -- cgit v1.2.3 From 4f63135eb23015a17eaf4f7478deedf63e98ff5c Mon Sep 17 00:00:00 2001 From: Ben Collins Date: Wed, 30 Jul 2008 12:39:02 -0700 Subject: pegasus: add blacklist support to fix Belkin bluetooth dongle. Reference: https://launchpad.net/bugs/140511 The Belkin bluetooth dongle unfortunately shares the vendor and device id with the network adapter which causes lockups whenever the bluetooth dongle is inserted. Signed-off-by: Stefan Bader Signed-off-by: Ben Collins Cc: Greg Kroah-Hartman Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/usb/pegasus.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index b588c890ea70..a84ba487c713 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -1285,6 +1285,21 @@ static void check_carrier(struct work_struct *work) } } +static int pegasus_blacklisted(struct usb_device *udev) +{ + struct usb_device_descriptor *udd = &udev->descriptor; + + /* Special quirk to keep the driver from handling the Belkin Bluetooth + * dongle which happens to have the same ID. + */ + if ((udd->idVendor == VENDOR_BELKIN && udd->idProduct == 0x0121) && + (udd->bDeviceClass == USB_CLASS_WIRELESS_CONTROLLER) && + (udd->bDeviceProtocol == 1)) + return 1; + + return 0; +} + static int pegasus_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -1296,6 +1311,12 @@ static int pegasus_probe(struct usb_interface *intf, DECLARE_MAC_BUF(mac); usb_get_dev(dev); + + if (pegasus_blacklisted(dev)) { + res = -ENODEV; + goto out; + } + net = alloc_etherdev(sizeof(struct pegasus)); if (!net) { dev_err(&intf->dev, "can't allocate %s\n", "device"); -- cgit v1.2.3 From b11f8d8cc3bb2fa6fa55286babc1a5ebb2e932c4 Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Tue, 15 Jul 2008 02:18:41 -0700 Subject: ethtool: Expand ethtool_cmd.speed to 32 bits Introduce the speed_hi field to ethtool_cmd, using the reserved space, to expand the speed field to 2^32 Megabits/second. Making this field expansion now gives us plenty of time to fix up the user-space pieces that use SIOCETHTOOL before hardware faster than 64 Gb/s is available. Signed-off-by: Brandon Philips Signed-off-by: Jeff Garzik --- include/linux/ethtool.h | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 8bb5e87df365..b4b038b89ee6 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -27,9 +27,24 @@ struct ethtool_cmd { __u8 autoneg; /* Enable or disable autonegotiation */ __u32 maxtxpkt; /* Tx pkts before generating tx int */ __u32 maxrxpkt; /* Rx pkts before generating rx int */ - __u32 reserved[4]; + __u16 speed_hi; + __u16 reserved2; + __u32 reserved[3]; }; +static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep, + __u32 speed) +{ + + ep->speed = (__u16)speed; + ep->speed_hi = (__u16)(speed >> 16); +} + +static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep) +{ + return (ep->speed_hi << 16) | ep->speed; +} + #define ETHTOOL_BUSINFO_LEN 32 /* these strings are set to whatever the driver author decides... */ struct ethtool_drvinfo { -- cgit v1.2.3 From 9a5d3414202a21ed4b053657345ea0fd492d513a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 25 Jul 2008 12:07:22 -0700 Subject: 3c59x: use netdev_alloc_skb Fix possible bug where end of receive buffer could be overwritten. The allocation needs to allow for the reserved space. This would only happen if device received packet greater than Ethernet standard MTU. Change this driver to use netdev_alloc_skb rather than setting skb->dev directly. For the initial allocation it doesn't need to be GFP_ATOMIC. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/3c59x.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index 8db4e6b89482..491ee16da5c1 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -1692,12 +1692,14 @@ vortex_open(struct net_device *dev) vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1)); vp->rx_ring[i].status = 0; /* Clear complete bit. */ vp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ | LAST_FRAG); - skb = dev_alloc_skb(PKT_BUF_SZ); + + skb = __netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN, + GFP_KERNEL); vp->rx_skbuff[i] = skb; if (skb == NULL) break; /* Bad news! */ - skb->dev = dev; /* Mark as being used by this device. */ - skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ + + skb_reserve(skb, NET_IP_ALIGN); /* Align IP on 16 byte boundaries */ vp->rx_ring[i].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE)); } if (i != RX_RING_SIZE) { @@ -2538,7 +2540,7 @@ boomerang_rx(struct net_device *dev) struct sk_buff *skb; entry = vp->dirty_rx % RX_RING_SIZE; if (vp->rx_skbuff[entry] == NULL) { - skb = dev_alloc_skb(PKT_BUF_SZ); + skb = netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN); if (skb == NULL) { static unsigned long last_jif; if (time_after(jiffies, last_jif + 10 * HZ)) { @@ -2549,8 +2551,8 @@ boomerang_rx(struct net_device *dev) mod_timer(&vp->rx_oom_timer, RUN_AT(HZ * 1)); break; /* Bad news! */ } - skb->dev = dev; /* Mark as being used by this device. */ - skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ + + skb_reserve(skb, NET_IP_ALIGN); vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE)); vp->rx_skbuff[entry] = skb; } -- cgit v1.2.3 From fe414248551e2880fe8913577699003ff145ab9d Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 23 Jul 2008 17:41:52 +0200 Subject: dm9000: Support MAC address setting through platform data. The dm9000 driver reads the chip's MAC address from the attached EEPROM. When no EEPROM is present, or when the MAC address is invalid, it falls back to reading the address from the chip. This patch lets platform code set the desired MAC address through platform data. Signed-off-by: Laurent Pinchart Signed-off-by: Jeff Garzik --- drivers/net/dm9000.c | 5 +++++ include/linux/dm9000.h | 1 + 2 files changed, 6 insertions(+) diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 0b0f1c407a7e..f42c23f42652 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -1374,6 +1374,11 @@ dm9000_probe(struct platform_device *pdev) for (i = 0; i < 6; i += 2) dm9000_read_eeprom(db, i / 2, ndev->dev_addr+i); + if (!is_valid_ether_addr(ndev->dev_addr) && pdata != NULL) { + mac_src = "platform data"; + memcpy(ndev->dev_addr, pdata->dev_addr, 6); + } + if (!is_valid_ether_addr(ndev->dev_addr)) { /* try reading from mac */ diff --git a/include/linux/dm9000.h b/include/linux/dm9000.h index fc82446b6425..c30879cf93bc 100644 --- a/include/linux/dm9000.h +++ b/include/linux/dm9000.h @@ -27,6 +27,7 @@ struct dm9000_plat_data { unsigned int flags; + unsigned char dev_addr[6]; /* allow replacement IO routines */ -- cgit v1.2.3 From c16d118537cadb21d186e35aebad90a13cd78846 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Tue, 22 Jul 2008 13:13:12 +0800 Subject: [netdrvr] Drivers should not set IFF_* flag themselves Some hardware set promisc when they are requested to set IFF_ALLMULTI flag. It's ok, but if drivers set IFF_PROMISC flag when they set promisc, it will broken upper layer handle for promisc and allmulti. In addition, drivers can use their own hardware programming to make it. So do not allow drivers to set IFF_* flags. This is a general driver fix, so I didn't split it to pieces and send to specific driver maintainers. Signed-off-by: Wang Chen Signed-off-by: Jeff Garzik --- drivers/net/3c523.c | 4 +--- drivers/net/3c527.c | 9 +++------ drivers/net/atp.c | 9 ++------- drivers/net/de620.c | 7 ------- drivers/net/eepro.c | 8 -------- drivers/net/eth16i.c | 1 - drivers/net/lp486e.c | 2 -- drivers/net/ni5010.c | 1 - drivers/net/ni52.c | 2 +- drivers/net/sun3_82586.c | 7 ++----- drivers/net/wireless/orinoco.c | 7 ------- drivers/net/wireless/wavelan.c | 3 --- drivers/net/wireless/wavelan_cs.c | 6 ------ 13 files changed, 9 insertions(+), 57 deletions(-) diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c index dc6e474229b1..e2ce41d3828e 100644 --- a/drivers/net/3c523.c +++ b/drivers/net/3c523.c @@ -640,10 +640,8 @@ static int init586(struct net_device *dev) cfg_cmd->time_low = 0x00; cfg_cmd->time_high = 0xf2; cfg_cmd->promisc = 0; - if (dev->flags & (IFF_ALLMULTI | IFF_PROMISC)) { + if (dev->flags & (IFF_ALLMULTI | IFF_PROMISC)) cfg_cmd->promisc = 1; - dev->flags |= IFF_PROMISC; - } cfg_cmd->carr_coll = 0x00; p->scb->cbl_offset = make16(cfg_cmd); diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c index 6aca0c640f13..abc84f765973 100644 --- a/drivers/net/3c527.c +++ b/drivers/net/3c527.c @@ -1521,14 +1521,11 @@ static void do_mc32_set_multicast_list(struct net_device *dev, int retry) struct mc32_local *lp = netdev_priv(dev); u16 filt = (1<<2); /* Save Bad Packets, for stats purposes */ - if (dev->flags&IFF_PROMISC) + if ((dev->flags&IFF_PROMISC) || + (dev->flags&IFF_ALLMULTI) || + dev->mc_count > 10) /* Enable promiscuous mode */ filt |= 1; - else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > 10) - { - dev->flags|=IFF_PROMISC; - filt |= 1; - } else if(dev->mc_count) { unsigned char block[62]; diff --git a/drivers/net/atp.c b/drivers/net/atp.c index 3d4433358a36..c10cd8058e23 100644 --- a/drivers/net/atp.c +++ b/drivers/net/atp.c @@ -854,14 +854,9 @@ static void set_rx_mode_8002(struct net_device *dev) struct net_local *lp = netdev_priv(dev); long ioaddr = dev->base_addr; - if ( dev->mc_count > 0 || (dev->flags & (IFF_ALLMULTI|IFF_PROMISC))) { - /* We must make the kernel realise we had to move - * into promisc mode or we start all out war on - * the cable. - AC - */ - dev->flags|=IFF_PROMISC; + if (dev->mc_count > 0 || (dev->flags & (IFF_ALLMULTI|IFF_PROMISC))) lp->addr_mode = CMR2h_PROMISC; - } else + else lp->addr_mode = CMR2h_Normal; write_reg_high(ioaddr, CMR2, lp->addr_mode); } diff --git a/drivers/net/de620.c b/drivers/net/de620.c index 3f5190c654cf..d454e143483e 100644 --- a/drivers/net/de620.c +++ b/drivers/net/de620.c @@ -488,13 +488,6 @@ static void de620_set_multicast_list(struct net_device *dev) { if (dev->mc_count || dev->flags&(IFF_ALLMULTI|IFF_PROMISC)) { /* Enable promiscuous mode */ - /* - * We must make the kernel realise we had to move - * into promisc mode or we start all out war on - * the cable. - AC - */ - dev->flags|=IFF_PROMISC; - de620_set_register(dev, W_TCR, (TCR_DEF & ~RXPBM) | RXALL); } else diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c index 56f50491a453..1f11350e16cf 100644 --- a/drivers/net/eepro.c +++ b/drivers/net/eepro.c @@ -1283,14 +1283,6 @@ set_multicast_list(struct net_device *dev) if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC) || dev->mc_count > 63) { - /* - * We must make the kernel realise we had to move - * into promisc mode or we start all out war on - * the cable. If it was a promisc request the - * flag is already set. If not we assert it. - */ - dev->flags|=IFF_PROMISC; - eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */ mode = inb(ioaddr + REG2); outb(mode | PRMSC_Mode, ioaddr + REG2); diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c index e3dd8b136908..bee8b3fbc565 100644 --- a/drivers/net/eth16i.c +++ b/drivers/net/eth16i.c @@ -1356,7 +1356,6 @@ static void eth16i_multicast(struct net_device *dev) if(dev->mc_count || dev->flags&(IFF_ALLMULTI|IFF_PROMISC)) { - dev->flags|=IFF_PROMISC; /* Must do this */ outb(3, ioaddr + RECEIVE_MODE_REG); } else { outb(2, ioaddr + RECEIVE_MODE_REG); diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c index 591a7e4220c7..83fa9d82a004 100644 --- a/drivers/net/lp486e.c +++ b/drivers/net/lp486e.c @@ -1272,8 +1272,6 @@ static void set_multicast_list(struct net_device *dev) { return; } if (dev->mc_count == 0 && !(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) { - if (dev->flags & IFF_ALLMULTI) - dev->flags |= IFF_PROMISC; lp->i596_config[8] &= ~0x01; } else { lp->i596_config[8] |= 0x01; diff --git a/drivers/net/ni5010.c b/drivers/net/ni5010.c index a20005c09e07..8e0ca9f4e404 100644 --- a/drivers/net/ni5010.c +++ b/drivers/net/ni5010.c @@ -648,7 +648,6 @@ static void ni5010_set_multicast_list(struct net_device *dev) PRINTK2((KERN_DEBUG "%s: entering set_multicast_list\n", dev->name)); if (dev->flags&IFF_PROMISC || dev->flags&IFF_ALLMULTI || dev->mc_list) { - dev->flags |= IFF_PROMISC; outb(RMD_PROMISC, EDLC_RMODE); /* Enable promiscuous mode */ PRINTK((KERN_DEBUG "%s: Entering promiscuous mode\n", dev->name)); } else { diff --git a/drivers/net/ni52.c b/drivers/net/ni52.c index a316dcc8a06d..b9a882d362da 100644 --- a/drivers/net/ni52.c +++ b/drivers/net/ni52.c @@ -621,7 +621,7 @@ static int init586(struct net_device *dev) if (num_addrs > len) { printk(KERN_ERR "%s: switching to promisc. mode\n", dev->name); - dev->flags |= IFF_PROMISC; + writeb(0x01, &cfg_cmd->promisc); } } if (dev->flags & IFF_PROMISC) diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c index 9b2a7f7bb258..e531302d95f5 100644 --- a/drivers/net/sun3_82586.c +++ b/drivers/net/sun3_82586.c @@ -425,14 +425,11 @@ static int init586(struct net_device *dev) int len = ((char *) p->iscp - (char *) ptr - 8) / 6; if(num_addrs > len) { printk("%s: switching to promisc. mode\n",dev->name); - dev->flags|=IFF_PROMISC; + cfg_cmd->promisc = 1; } } if(dev->flags&IFF_PROMISC) - { - cfg_cmd->promisc=1; - dev->flags|=IFF_PROMISC; - } + cfg_cmd->promisc = 1; cfg_cmd->carr_coll = 0x00; p->scb->cbl_offset = make16(cfg_cmd); diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index b047306bf386..1ebcafe7ca5f 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -1998,13 +1998,6 @@ __orinoco_set_multicast_list(struct net_device *dev) else priv->mc_count = mc_count; } - - /* Since we can set the promiscuous flag when it wasn't asked - for, make sure the net_device knows about it. */ - if (priv->promiscuous) - dev->flags |= IFF_PROMISC; - else - dev->flags &= ~IFF_PROMISC; } /* This must be called from user context, without locks held - use diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c index 49ae97003952..136220b5ca81 100644 --- a/drivers/net/wireless/wavelan.c +++ b/drivers/net/wireless/wavelan.c @@ -1409,9 +1409,6 @@ static void wavelan_set_multicast_list(struct net_device * dev) lp->mc_count = 0; wv_82586_reconfig(dev); - - /* Tell the kernel that we are doing a really bad job. */ - dev->flags |= IFF_PROMISC; } } else /* Are there multicast addresses to send? */ diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index b584c0ecc62d..00a3559e5aa4 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -1412,9 +1412,6 @@ wavelan_set_multicast_list(struct net_device * dev) lp->mc_count = 0; wv_82593_reconfig(dev); - - /* Tell the kernel that we are doing a really bad job... */ - dev->flags |= IFF_PROMISC; } } else @@ -1433,9 +1430,6 @@ wavelan_set_multicast_list(struct net_device * dev) lp->mc_count = 0; wv_82593_reconfig(dev); - - /* Tell the kernel that we are doing a really bad job... */ - dev->flags |= IFF_ALLMULTI; } } else -- cgit v1.2.3 From ee7af8264dafa0c8c76a8dc596803966c2e29ebc Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 6 Aug 2008 23:35:59 -0700 Subject: pkt_sched: Fix "parent is root" test in qdisc_create(). As noticed by Stephen Hemminger, the root qdisc is denoted by TC_H_ROOT, not zero. Signed-off-by: David S. Miller --- net/sched/sch_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index 4840aff47256..83b23b55ce36 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -792,7 +792,7 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue, goto err_out3; } } - if (parent && !(sch->flags & TCQ_F_INGRESS)) + if ((parent != TC_H_ROOT) && !(sch->flags & TCQ_F_INGRESS)) list_add_tail(&sch->list, &dev_queue->qdisc->list); return sch; -- cgit v1.2.3 From 6edafaaf6f5e70ef1e620ff01bd6bacebe1e0718 Mon Sep 17 00:00:00 2001 From: Gui Jianfeng Date: Wed, 6 Aug 2008 23:50:04 -0700 Subject: tcp: Fix kernel panic when calling tcp_v(4/6)_md5_do_lookup If the following packet flow happen, kernel will panic. MathineA MathineB SYN ----------------------> SYN+ACK <---------------------- ACK(bad seq) ----------------------> When a bad seq ACK is received, tcp_v4_md5_do_lookup(skb->sk, ip_hdr(skb)->daddr)) is finally called by tcp_v4_reqsk_send_ack(), but the first parameter(skb->sk) is NULL at that moment, so kernel panic happens. This patch fixes this bug. OOPS output is as following: [ 302.812793] IP: [] tcp_v4_md5_do_lookup+0x12/0x42 [ 302.817075] Oops: 0000 [#1] SMP [ 302.819815] Modules linked in: ipv6 loop dm_multipath rtc_cmos rtc_core rtc_lib pcspkr pcnet32 mii i2c_piix4 parport_pc i2c_core parport ac button ata_piix libata dm_mod mptspi mptscsih mptbase scsi_transport_spi sd_mod scsi_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan] [ 302.849946] [ 302.851198] Pid: 0, comm: swapper Not tainted (2.6.27-rc1-guijf #5) [ 302.855184] EIP: 0060:[] EFLAGS: 00010296 CPU: 0 [ 302.858296] EIP is at tcp_v4_md5_do_lookup+0x12/0x42 [ 302.861027] EAX: 0000001e EBX: 00000000 ECX: 00000046 EDX: 00000046 [ 302.864867] ESI: ceb69e00 EDI: 1467a8c0 EBP: cf75f180 ESP: c0792e54 [ 302.868333] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 302.871287] Process swapper (pid: 0, ti=c0792000 task=c0712340 task.ti=c0746000) [ 302.875592] Stack: c06f413a 00000000 cf75f180 ceb69e00 00000000 c05d0d86 000016d0 ceac5400 [ 302.883275] c05d28f8 000016d0 ceb69e00 ceb69e20 681bf6e3 00001000 00000000 0a67a8c0 [ 302.890971] ceac5400 c04250a3 c06f413a c0792eb0 c0792edc cf59a620 cf59a620 cf59a634 [ 302.900140] Call Trace: [ 302.902392] [] tcp_v4_reqsk_send_ack+0x17/0x35 [ 302.907060] [] tcp_check_req+0x156/0x372 [ 302.910082] [] printk+0x14/0x18 [ 302.912868] [] tcp_v4_do_rcv+0x1d3/0x2bf [ 302.917423] [] tcp_v4_rcv+0x563/0x5b9 [ 302.920453] [] ip_local_deliver_finish+0xe8/0x183 [ 302.923865] [] ip_rcv_finish+0x286/0x2a3 [ 302.928569] [] dev_alloc_skb+0x11/0x25 [ 302.931563] [] netif_receive_skb+0x2d6/0x33a [ 302.934914] [] pcnet32_poll+0x333/0x680 [pcnet32] [ 302.938735] [] net_rx_action+0x5c/0xfe [ 302.941792] [] __do_softirq+0x5d/0xc1 [ 302.944788] [] __do_softirq+0x0/0xc1 [ 302.948999] [] do_softirq+0x55/0x88 [ 302.951870] [] handle_fasteoi_irq+0x0/0xa4 [ 302.954986] [] irq_exit+0x35/0x69 [ 302.959081] [] do_IRQ+0x99/0xae [ 302.961896] [] common_interrupt+0x23/0x28 [ 302.966279] [] default_idle+0x2a/0x3d [ 302.969212] [] cpu_idle+0xb2/0xd2 [ 302.972169] ======================= [ 302.974274] Code: fc ff 84 d2 0f 84 df fd ff ff e9 34 fe ff ff 83 c4 0c 5b 5e 5f 5d c3 90 90 57 89 d7 56 53 89 c3 50 68 3a 41 6f c0 e8 e9 55 e5 ff <8b> 93 9c 04 00 00 58 85 d2 59 74 1e 8b 72 10 31 db 31 c9 85 f6 [ 303.011610] EIP: [] tcp_v4_md5_do_lookup+0x12/0x42 SS:ESP 0068:c0792e54 [ 303.018360] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Gui Jianfeng Signed-off-by: David S. Miller --- include/net/request_sock.h | 2 +- net/dccp/dccp.h | 3 ++- net/dccp/minisocks.c | 3 ++- net/ipv4/tcp_ipv4.c | 4 ++-- net/ipv4/tcp_minisocks.c | 2 +- net/ipv6/tcp_ipv6.c | 8 +++++--- 6 files changed, 13 insertions(+), 9 deletions(-) diff --git a/include/net/request_sock.h b/include/net/request_sock.h index 8d6e991ef4df..cac811e51f6d 100644 --- a/include/net/request_sock.h +++ b/include/net/request_sock.h @@ -33,7 +33,7 @@ struct request_sock_ops { struct kmem_cache *slab; int (*rtx_syn_ack)(struct sock *sk, struct request_sock *req); - void (*send_ack)(struct sk_buff *skb, + void (*send_ack)(struct sock *sk, struct sk_buff *skb, struct request_sock *req); void (*send_reset)(struct sock *sk, struct sk_buff *skb); diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index 1c2e3ec2eb57..b4bc6e095a0e 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -229,7 +229,8 @@ extern void dccp_v4_send_check(struct sock *sk, int len, struct sk_buff *skb); extern int dccp_retransmit_skb(struct sock *sk); extern void dccp_send_ack(struct sock *sk); -extern void dccp_reqsk_send_ack(struct sk_buff *sk, struct request_sock *rsk); +extern void dccp_reqsk_send_ack(struct sock *sk, struct sk_buff *skb, + struct request_sock *rsk); extern void dccp_send_sync(struct sock *sk, const u64 seq, const enum dccp_pkt_type pkt_type); diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c index 66dca5bba858..b2804e2d1b8c 100644 --- a/net/dccp/minisocks.c +++ b/net/dccp/minisocks.c @@ -296,7 +296,8 @@ int dccp_child_process(struct sock *parent, struct sock *child, EXPORT_SYMBOL_GPL(dccp_child_process); -void dccp_reqsk_send_ack(struct sk_buff *skb, struct request_sock *rsk) +void dccp_reqsk_send_ack(struct sock *sk, struct sk_buff *skb, + struct request_sock *rsk) { DCCP_BUG("DCCP-ACK packets are never sent in LISTEN/RESPOND state"); } diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 91a8cfddf1c4..44c1e934824b 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -687,14 +687,14 @@ static void tcp_v4_timewait_ack(struct sock *sk, struct sk_buff *skb) inet_twsk_put(tw); } -static void tcp_v4_reqsk_send_ack(struct sk_buff *skb, +static void tcp_v4_reqsk_send_ack(struct sock *sk, struct sk_buff *skb, struct request_sock *req) { tcp_v4_send_ack(skb, tcp_rsk(req)->snt_isn + 1, tcp_rsk(req)->rcv_isn + 1, req->rcv_wnd, req->ts_recent, 0, - tcp_v4_md5_do_lookup(skb->sk, ip_hdr(skb)->daddr)); + tcp_v4_md5_do_lookup(sk, ip_hdr(skb)->daddr)); } /* diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index 204c42162660..6d286f58c00d 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -609,7 +609,7 @@ struct sock *tcp_check_req(struct sock *sk,struct sk_buff *skb, tcp_rsk(req)->rcv_isn + 1, tcp_rsk(req)->rcv_isn + 1 + req->rcv_wnd)) { /* Out of window: send ACK and drop. */ if (!(flg & TCP_FLAG_RST)) - req->rsk_ops->send_ack(skb, req); + req->rsk_ops->send_ack(sk, skb, req); if (paws_reject) NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_PAWSESTABREJECTED); return NULL; diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 78185a409212..5b90b369ccb2 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -69,7 +69,8 @@ #include static void tcp_v6_send_reset(struct sock *sk, struct sk_buff *skb); -static void tcp_v6_reqsk_send_ack(struct sk_buff *skb, struct request_sock *req); +static void tcp_v6_reqsk_send_ack(struct sock *sk, struct sk_buff *skb, + struct request_sock *req); static int tcp_v6_do_rcv(struct sock *sk, struct sk_buff *skb); @@ -1138,10 +1139,11 @@ static void tcp_v6_timewait_ack(struct sock *sk, struct sk_buff *skb) inet_twsk_put(tw); } -static void tcp_v6_reqsk_send_ack(struct sk_buff *skb, struct request_sock *req) +static void tcp_v6_reqsk_send_ack(struct sock *sk, struct sk_buff *skb, + struct request_sock *req) { tcp_v6_send_ack(skb, tcp_rsk(req)->snt_isn + 1, tcp_rsk(req)->rcv_isn + 1, req->rcv_wnd, req->ts_recent, - tcp_v6_md5_do_lookup(skb->sk, &ipv6_hdr(skb)->daddr)); + tcp_v6_md5_do_lookup(sk, &ipv6_hdr(skb)->daddr)); } -- cgit v1.2.3 From f0c76d61779b153dbfb955db3f144c62d02173c2 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Wed, 2 Jul 2008 18:21:58 -0700 Subject: bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- drivers/net/bonding/bond_3ad.c | 1 + drivers/net/bonding/bond_main.c | 394 ++++++++++++++++++---------------------- 2 files changed, 173 insertions(+), 222 deletions(-) diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index ebb539e090c3..6106660a4a44 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -2107,6 +2107,7 @@ void bond_3ad_state_machine_handler(struct work_struct *work) aggregator = __get_first_agg(port); ad_agg_selection_logic(aggregator); } + bond_3ad_set_carrier(bond); } // for each port run the state machines diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index a641eeaa2a2f..c792138511e6 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2223,272 +2223,217 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in /*-------------------------------- Monitoring -------------------------------*/ -/* - * if !have_locks, return nonzero if a failover is necessary. if - * have_locks, do whatever failover activities are needed. - * - * This is to separate the inspection and failover steps for locking - * purposes; failover requires rtnl, but acquiring it for every - * inspection is undesirable, so a wrapper first does inspection, and - * the acquires the necessary locks and calls again to perform - * failover if needed. Since all locks are dropped, a complete - * restart is needed between calls. - */ -static int __bond_mii_monitor(struct bonding *bond, int have_locks) -{ - struct slave *slave, *oldcurrent; - int do_failover = 0; - int i; - - if (bond->slave_cnt == 0) - goto out; - /* we will try to read the link status of each of our slaves, and - * set their IFF_RUNNING flag appropriately. For each slave not - * supporting MII status, we won't do anything so that a user-space - * program could monitor the link itself if needed. - */ - - read_lock(&bond->curr_slave_lock); - oldcurrent = bond->curr_active_slave; - read_unlock(&bond->curr_slave_lock); +static int bond_miimon_inspect(struct bonding *bond) +{ + struct slave *slave; + int i, link_state, commit = 0; bond_for_each_slave(bond, slave, i) { - struct net_device *slave_dev = slave->dev; - int link_state; - u16 old_speed = slave->speed; - u8 old_duplex = slave->duplex; + slave->new_link = BOND_LINK_NOCHANGE; - link_state = bond_check_dev_link(bond, slave_dev, 0); + link_state = bond_check_dev_link(bond, slave->dev, 0); switch (slave->link) { - case BOND_LINK_UP: /* the link was up */ - if (link_state == BMSR_LSTATUS) { - if (!oldcurrent) { - if (!have_locks) - return 1; - do_failover = 1; - } - break; - } else { /* link going down */ - slave->link = BOND_LINK_FAIL; - slave->delay = bond->params.downdelay; - - if (slave->link_failure_count < UINT_MAX) { - slave->link_failure_count++; - } + case BOND_LINK_UP: + if (link_state) + continue; - if (bond->params.downdelay) { - printk(KERN_INFO DRV_NAME - ": %s: link status down for %s " - "interface %s, disabling it in " - "%d ms.\n", - bond->dev->name, - IS_UP(slave_dev) - ? ((bond->params.mode == BOND_MODE_ACTIVEBACKUP) - ? ((slave == oldcurrent) - ? "active " : "backup ") - : "") - : "idle ", - slave_dev->name, - bond->params.downdelay * bond->params.miimon); - } + slave->link = BOND_LINK_FAIL; + slave->delay = bond->params.downdelay; + if (slave->delay) { + printk(KERN_INFO DRV_NAME + ": %s: link status down for %s" + "interface %s, disabling it in %d ms.\n", + bond->dev->name, + (bond->params.mode == + BOND_MODE_ACTIVEBACKUP) ? + ((slave->state == BOND_STATE_ACTIVE) ? + "active " : "backup ") : "", + slave->dev->name, + bond->params.downdelay * bond->params.miimon); } - /* no break ! fall through the BOND_LINK_FAIL test to - ensure proper action to be taken - */ - case BOND_LINK_FAIL: /* the link has just gone down */ - if (link_state != BMSR_LSTATUS) { - /* link stays down */ - if (slave->delay <= 0) { - if (!have_locks) - return 1; - - /* link down for too long time */ - slave->link = BOND_LINK_DOWN; - - /* in active/backup mode, we must - * completely disable this interface - */ - if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP) || - (bond->params.mode == BOND_MODE_8023AD)) { - bond_set_slave_inactive_flags(slave); - } - - printk(KERN_INFO DRV_NAME - ": %s: link status definitely " - "down for interface %s, " - "disabling it\n", - bond->dev->name, - slave_dev->name); - - /* notify ad that the link status has changed */ - if (bond->params.mode == BOND_MODE_8023AD) { - bond_3ad_handle_link_change(slave, BOND_LINK_DOWN); - } - - if ((bond->params.mode == BOND_MODE_TLB) || - (bond->params.mode == BOND_MODE_ALB)) { - bond_alb_handle_link_change(bond, slave, BOND_LINK_DOWN); - } - - if (slave == oldcurrent) { - do_failover = 1; - } - } else { - slave->delay--; - } - } else { - /* link up again */ - slave->link = BOND_LINK_UP; + /*FALLTHRU*/ + case BOND_LINK_FAIL: + if (link_state) { + /* + * recovered before downdelay expired + */ + slave->link = BOND_LINK_UP; slave->jiffies = jiffies; printk(KERN_INFO DRV_NAME ": %s: link status up again after %d " "ms for interface %s.\n", bond->dev->name, - (bond->params.downdelay - slave->delay) * bond->params.miimon, - slave_dev->name); + (bond->params.downdelay - slave->delay) * + bond->params.miimon, + slave->dev->name); + continue; } - break; - case BOND_LINK_DOWN: /* the link was down */ - if (link_state != BMSR_LSTATUS) { - /* the link stays down, nothing more to do */ - break; - } else { /* link going up */ - slave->link = BOND_LINK_BACK; - slave->delay = bond->params.updelay; - if (bond->params.updelay) { - /* if updelay == 0, no need to - advertise about a 0 ms delay */ - printk(KERN_INFO DRV_NAME - ": %s: link status up for " - "interface %s, enabling it " - "in %d ms.\n", - bond->dev->name, - slave_dev->name, - bond->params.updelay * bond->params.miimon); - } + if (slave->delay <= 0) { + slave->new_link = BOND_LINK_DOWN; + commit++; + continue; } - /* no break ! fall through the BOND_LINK_BACK state in - case there's something to do. - */ - case BOND_LINK_BACK: /* the link has just come back */ - if (link_state != BMSR_LSTATUS) { - /* link down again */ - slave->link = BOND_LINK_DOWN; + slave->delay--; + break; + + case BOND_LINK_DOWN: + if (!link_state) + continue; + + slave->link = BOND_LINK_BACK; + slave->delay = bond->params.updelay; + + if (slave->delay) { + printk(KERN_INFO DRV_NAME + ": %s: link status up for " + "interface %s, enabling it in %d ms.\n", + bond->dev->name, slave->dev->name, + bond->params.updelay * + bond->params.miimon); + } + /*FALLTHRU*/ + case BOND_LINK_BACK: + if (!link_state) { + slave->link = BOND_LINK_DOWN; printk(KERN_INFO DRV_NAME ": %s: link status down again after %d " "ms for interface %s.\n", bond->dev->name, - (bond->params.updelay - slave->delay) * bond->params.miimon, - slave_dev->name); - } else { - /* link stays up */ - if (slave->delay == 0) { - if (!have_locks) - return 1; - - /* now the link has been up for long time enough */ - slave->link = BOND_LINK_UP; - slave->jiffies = jiffies; - - if (bond->params.mode == BOND_MODE_8023AD) { - /* prevent it from being the active one */ - slave->state = BOND_STATE_BACKUP; - } else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) { - /* make it immediately active */ - slave->state = BOND_STATE_ACTIVE; - } else if (slave != bond->primary_slave) { - /* prevent it from being the active one */ - slave->state = BOND_STATE_BACKUP; - } + (bond->params.updelay - slave->delay) * + bond->params.miimon, + slave->dev->name); - printk(KERN_INFO DRV_NAME - ": %s: link status definitely " - "up for interface %s.\n", - bond->dev->name, - slave_dev->name); - - /* notify ad that the link status has changed */ - if (bond->params.mode == BOND_MODE_8023AD) { - bond_3ad_handle_link_change(slave, BOND_LINK_UP); - } - - if ((bond->params.mode == BOND_MODE_TLB) || - (bond->params.mode == BOND_MODE_ALB)) { - bond_alb_handle_link_change(bond, slave, BOND_LINK_UP); - } - - if ((!oldcurrent) || - (slave == bond->primary_slave)) { - do_failover = 1; - } - } else { - slave->delay--; - } + continue; } + + if (slave->delay <= 0) { + slave->new_link = BOND_LINK_UP; + commit++; + continue; + } + + slave->delay--; break; - default: - /* Should not happen */ - printk(KERN_ERR DRV_NAME - ": %s: Error: %s Illegal value (link=%d)\n", - bond->dev->name, - slave->dev->name, - slave->link); - goto out; - } /* end of switch (slave->link) */ + } + } - bond_update_speed_duplex(slave); + return commit; +} - if (bond->params.mode == BOND_MODE_8023AD) { - if (old_speed != slave->speed) { - bond_3ad_adapter_speed_changed(slave); - } +static void bond_miimon_commit(struct bonding *bond) +{ + struct slave *slave; + int i; + + bond_for_each_slave(bond, slave, i) { + switch (slave->new_link) { + case BOND_LINK_NOCHANGE: + continue; + + case BOND_LINK_UP: + slave->link = BOND_LINK_UP; + slave->jiffies = jiffies; - if (old_duplex != slave->duplex) { - bond_3ad_adapter_duplex_changed(slave); + if (bond->params.mode == BOND_MODE_8023AD) { + /* prevent it from being the active one */ + slave->state = BOND_STATE_BACKUP; + } else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) { + /* make it immediately active */ + slave->state = BOND_STATE_ACTIVE; + } else if (slave != bond->primary_slave) { + /* prevent it from being the active one */ + slave->state = BOND_STATE_BACKUP; } - } - } /* end of for */ + printk(KERN_INFO DRV_NAME + ": %s: link status definitely " + "up for interface %s.\n", + bond->dev->name, slave->dev->name); - if (do_failover) { - ASSERT_RTNL(); + /* notify ad that the link status has changed */ + if (bond->params.mode == BOND_MODE_8023AD) + bond_3ad_handle_link_change(slave, BOND_LINK_UP); - write_lock_bh(&bond->curr_slave_lock); + if ((bond->params.mode == BOND_MODE_TLB) || + (bond->params.mode == BOND_MODE_ALB)) + bond_alb_handle_link_change(bond, slave, + BOND_LINK_UP); - bond_select_active_slave(bond); + if (!bond->curr_active_slave || + (slave == bond->primary_slave)) + goto do_failover; - write_unlock_bh(&bond->curr_slave_lock); + continue; - } else - bond_set_carrier(bond); + case BOND_LINK_DOWN: + slave->link = BOND_LINK_DOWN; -out: - return 0; + if (bond->params.mode == BOND_MODE_ACTIVEBACKUP || + bond->params.mode == BOND_MODE_8023AD) + bond_set_slave_inactive_flags(slave); + + printk(KERN_INFO DRV_NAME + ": %s: link status definitely down for " + "interface %s, disabling it\n", + bond->dev->name, slave->dev->name); + + if (bond->params.mode == BOND_MODE_8023AD) + bond_3ad_handle_link_change(slave, + BOND_LINK_DOWN); + + if (bond->params.mode == BOND_MODE_TLB || + bond->params.mode == BOND_MODE_ALB) + bond_alb_handle_link_change(bond, slave, + BOND_LINK_DOWN); + + if (slave == bond->curr_active_slave) + goto do_failover; + + continue; + + default: + printk(KERN_ERR DRV_NAME + ": %s: invalid new link %d on slave %s\n", + bond->dev->name, slave->new_link, + slave->dev->name); + slave->new_link = BOND_LINK_NOCHANGE; + + continue; + } + +do_failover: + ASSERT_RTNL(); + write_lock_bh(&bond->curr_slave_lock); + bond_select_active_slave(bond); + write_unlock_bh(&bond->curr_slave_lock); + } + + bond_set_carrier(bond); } /* * bond_mii_monitor * * Really a wrapper that splits the mii monitor into two phases: an - * inspection, then (if inspection indicates something needs to be - * done) an acquisition of appropriate locks followed by another pass - * to implement whatever link state changes are indicated. + * inspection, then (if inspection indicates something needs to be done) + * an acquisition of appropriate locks followed by a commit phase to + * implement whatever link state changes are indicated. */ void bond_mii_monitor(struct work_struct *work) { struct bonding *bond = container_of(work, struct bonding, mii_work.work); - unsigned long delay; read_lock(&bond->lock); - if (bond->kill_timers) { - read_unlock(&bond->lock); - return; - } + if (bond->kill_timers) + goto out; + + if (bond->slave_cnt == 0) + goto re_arm; if (bond->send_grat_arp) { read_lock(&bond->curr_slave_lock); @@ -2496,19 +2441,24 @@ void bond_mii_monitor(struct work_struct *work) read_unlock(&bond->curr_slave_lock); } - if (__bond_mii_monitor(bond, 0)) { + if (bond_miimon_inspect(bond)) { read_unlock(&bond->lock); rtnl_lock(); read_lock(&bond->lock); - __bond_mii_monitor(bond, 1); + + bond_miimon_commit(bond); + read_unlock(&bond->lock); rtnl_unlock(); /* might sleep, hold no other locks */ read_lock(&bond->lock); } - delay = msecs_to_jiffies(bond->params.miimon); +re_arm: + if (bond->params.miimon) + queue_delayed_work(bond->wq, &bond->mii_work, + msecs_to_jiffies(bond->params.miimon)); +out: read_unlock(&bond->lock); - queue_delayed_work(bond->wq, &bond->mii_work, delay); } static __be32 bond_glean_dev_ip(struct net_device *dev) -- cgit v1.2.3 From db018a5f49e1768891221a580e59f6825c52ab7a Mon Sep 17 00:00:00 2001 From: Moni Shoua Date: Wed, 2 Jul 2008 18:21:59 -0700 Subject: bonding: Don't destroy bonding master when removing slave via sysfs It is wrong to destroy a bonding master from a context that uses the sysfs of that bond. When last IPoIB slave is unenslaved from by writing to a sysfs file (for bond0 this would be /sys/class/net/bond0/bonding/slaves) the driver tries to destroy the bond. This is wrong and can lead to a lockup or a crash. This fix lets the bonding master stay and relies on the user to destroy the bonding master if necessary (i.e. before module ib_ipoib is unloaded) This patch affects only bonds of IPoIB slaves. Ethernet slaves stay unaffected. Signed-off-by: Moni Shoua Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- drivers/net/bonding/bond_sysfs.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 6caac0ffb2f2..3bdb47382521 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -350,9 +350,6 @@ static ssize_t bonding_store_slaves(struct device *d, if (dev) { printk(KERN_INFO DRV_NAME ": %s: Removing slave %s\n", bond->dev->name, dev->name); - if (bond->setup_by_slave) - res = bond_release_and_destroy(bond->dev, dev); - else res = bond_release(bond->dev, dev); if (res) { ret = res; -- cgit v1.2.3 From cc9bd5cebc0825e0fabc0186ab85806a0891104f Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Wed, 2 Jul 2008 18:22:00 -0700 Subject: net/core: Uninline skb_bond(). Otherwise subsequent changes need multiple return values. Signed-off-by: Joe Eykholt Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- net/core/dev.c | 28 ++++++++-------------------- 1 file changed, 8 insertions(+), 20 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 01993ad74e76..4a09833331f1 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1939,22 +1939,6 @@ int netif_rx_ni(struct sk_buff *skb) EXPORT_SYMBOL(netif_rx_ni); -static inline struct net_device *skb_bond(struct sk_buff *skb) -{ - struct net_device *dev = skb->dev; - - if (dev->master) { - if (skb_bond_should_drop(skb)) { - kfree_skb(skb); - return NULL; - } - skb->dev = dev->master; - } - - return dev; -} - - static void net_tx_action(struct softirq_action *h) { struct softnet_data *sd = &__get_cpu_var(softnet_data); @@ -2194,10 +2178,14 @@ int netif_receive_skb(struct sk_buff *skb) if (!skb->iif) skb->iif = skb->dev->ifindex; - orig_dev = skb_bond(skb); - - if (!orig_dev) - return NET_RX_DROP; + orig_dev = skb->dev; + if (orig_dev->master) { + if (skb_bond_should_drop(skb)) { + kfree_skb(skb); + return NET_RX_DROP; + } + skb->dev = orig_dev->master; + } __get_cpu_var(netdev_rx_stat).total++; -- cgit v1.2.3 From 0d7a3681232f545c6a59f77e60f7667673ef0e93 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Wed, 2 Jul 2008 18:22:01 -0700 Subject: net/core: Allow certain receives on inactive slave. Allow a packet_type that specifies the exact device to receive even on an inactive bonding slave devices. This is important for some L2 protocols such as LLDP and FCoE. This can eventually be used for the bonding special cases as well. Signed-off-by: Joe Eykholt Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- net/core/dev.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 4a09833331f1..dab97c7cf275 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2165,6 +2165,7 @@ int netif_receive_skb(struct sk_buff *skb) { struct packet_type *ptype, *pt_prev; struct net_device *orig_dev; + struct net_device *null_or_orig; int ret = NET_RX_DROP; __be16 type; @@ -2178,13 +2179,13 @@ int netif_receive_skb(struct sk_buff *skb) if (!skb->iif) skb->iif = skb->dev->ifindex; + null_or_orig = NULL; orig_dev = skb->dev; if (orig_dev->master) { - if (skb_bond_should_drop(skb)) { - kfree_skb(skb); - return NET_RX_DROP; - } - skb->dev = orig_dev->master; + if (skb_bond_should_drop(skb)) + null_or_orig = orig_dev; /* deliver only exact match */ + else + skb->dev = orig_dev->master; } __get_cpu_var(netdev_rx_stat).total++; @@ -2209,7 +2210,7 @@ int netif_receive_skb(struct sk_buff *skb) #endif list_for_each_entry_rcu(ptype, &ptype_all, list) { - if (!ptype->dev || ptype->dev == skb->dev) { + if (ptype->dev == null_or_orig || ptype->dev == skb->dev) { if (pt_prev) ret = deliver_skb(skb, pt_prev, orig_dev); pt_prev = ptype; @@ -2234,7 +2235,7 @@ ncls: list_for_each_entry_rcu(ptype, &ptype_base[ntohs(type) & PTYPE_HASH_MASK], list) { if (ptype->type == type && - (!ptype->dev || ptype->dev == skb->dev)) { + (ptype->dev == null_or_orig || ptype->dev == skb->dev)) { if (pt_prev) ret = deliver_skb(skb, pt_prev, orig_dev); pt_prev = ptype; -- cgit v1.2.3 From f982307f22db96201e41540295f24e8dcc10c78f Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Wed, 2 Jul 2008 18:22:02 -0700 Subject: net/core: Allow receive on active slaves. If a packet_type specifies an active slave to bonding and not just any interface, allow it to receive frames that came in on that interface. Signed-off-by: Joe Eykholt Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- net/core/dev.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index dab97c7cf275..600bb23c4c2e 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2210,7 +2210,8 @@ int netif_receive_skb(struct sk_buff *skb) #endif list_for_each_entry_rcu(ptype, &ptype_all, list) { - if (ptype->dev == null_or_orig || ptype->dev == skb->dev) { + if (ptype->dev == null_or_orig || ptype->dev == skb->dev || + ptype->dev == orig_dev) { if (pt_prev) ret = deliver_skb(skb, pt_prev, orig_dev); pt_prev = ptype; @@ -2235,7 +2236,8 @@ ncls: list_for_each_entry_rcu(ptype, &ptype_base[ntohs(type) & PTYPE_HASH_MASK], list) { if (ptype->type == type && - (ptype->dev == null_or_orig || ptype->dev == skb->dev)) { + (ptype->dev == null_or_orig || ptype->dev == skb->dev || + ptype->dev == orig_dev)) { if (pt_prev) ret = deliver_skb(skb, pt_prev, orig_dev); pt_prev = ptype; -- cgit v1.2.3 From e2c709b0ba2886b5438b666222b4b3faf82d65a9 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Mon, 30 Jun 2008 22:09:15 +0200 Subject: WAN: remove extra help text from HDLC_PPP config option MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove extra help text from HDLC_PPP config option. Signed-off-by: Krzysztof Hałasa Signed-off-by: Jeff Garzik --- drivers/net/wan/Kconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 846be60e7821..91fb395a94fa 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -154,8 +154,6 @@ config HDLC_PPP help Generic HDLC driver supporting PPP over WAN connections. - It will be replaced by new PPP implementation in Linux 2.6.26. - If unsure, say N. config HDLC_X25 -- cgit v1.2.3 From 897d85275d7f061ff0ec838bd5224a9e76ad07d6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 Aug 2008 15:04:04 +0100 Subject: [ARM] Fix circular include dependency with IRQ headers Signed-off-by: Russell King --- arch/arm/include/asm/hw_irq.h | 20 +++++++++++++++++++- arch/arm/include/asm/mach/irq.h | 20 -------------------- arch/arm/kernel/irq.c | 1 + 3 files changed, 20 insertions(+), 21 deletions(-) diff --git a/arch/arm/include/asm/hw_irq.h b/arch/arm/include/asm/hw_irq.h index f1a08a500604..90831f6f5f5c 100644 --- a/arch/arm/include/asm/hw_irq.h +++ b/arch/arm/include/asm/hw_irq.h @@ -4,6 +4,24 @@ #ifndef _ARCH_ARM_HW_IRQ_H #define _ARCH_ARM_HW_IRQ_H -#include +static inline void ack_bad_irq(int irq) +{ + extern unsigned long irq_err_count; + irq_err_count++; +} + +/* + * Obsolete inline function for calling irq descriptor handlers. + */ +static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc) +{ + desc->handle_irq(irq, desc); +} + +void set_irq_flags(unsigned int irq, unsigned int flags); + +#define IRQF_VALID (1 << 0) +#define IRQF_PROBE (1 << 1) +#define IRQF_NOAUTOEN (1 << 2) #endif diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h index c57b52ce574a..acac5302e4ea 100644 --- a/arch/arm/include/asm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -21,20 +21,6 @@ extern void (*init_arch_irq)(void); extern void init_FIQ(void); extern int show_fiq_list(struct seq_file *, void *); -/* - * Obsolete inline function for calling irq descriptor handlers. - */ -static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc) -{ - desc->handle_irq(irq, desc); -} - -void set_irq_flags(unsigned int irq, unsigned int flags); - -#define IRQF_VALID (1 << 0) -#define IRQF_PROBE (1 << 1) -#define IRQF_NOAUTOEN (1 << 2) - /* * This is for easy migration, but should be changed in the source */ @@ -45,10 +31,4 @@ do { \ spin_unlock(&desc->lock); \ } while(0) -extern unsigned long irq_err_count; -static inline void ack_bad_irq(int irq) -{ - irq_err_count++; -} - #endif diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 11dcd52e51be..f88efb135b70 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -38,6 +38,7 @@ #include #include +#include #include /* -- cgit v1.2.3 From 0f8469a54f7bd65f2c740a5480c56260dc8a7ae0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 Aug 2008 15:06:16 +0100 Subject: [ARM] Eliminate useless includes of asm/mach-types.h There are 43 includes of asm/mach-types.h by files that don't reference anything from that file. Remove these unnecessary includes. Signed-off-by: Russell King --- arch/arm/boot/compressed/head-xscale.S | 1 - arch/arm/common/sharpsl_pm.c | 1 - arch/arm/kernel/head-nommu.S | 1 - arch/arm/mach-at91/clock.c | 1 - arch/arm/mach-at91/irq.c | 1 - arch/arm/mach-at91/leds.c | 1 - arch/arm/mach-at91/pm.c | 1 - arch/arm/mach-iop13xx/irq.c | 1 - arch/arm/mach-iop33x/uart.c | 1 - arch/arm/mach-ixp23xx/core.c | 1 - arch/arm/mach-ixp23xx/pci.c | 1 - arch/arm/mach-ks8695/leds.c | 1 - arch/arm/mach-mx2/clock_imx27.c | 1 - arch/arm/mach-mx2/pcm970-baseboard.c | 1 - arch/arm/mach-ns9xxx/irq.c | 1 - arch/arm/mach-omap1/devices.c | 1 - arch/arm/mach-omap1/pm.c | 1 - arch/arm/mach-omap2/pm.c | 1 - arch/arm/mach-pnx4008/irq.c | 1 - arch/arm/mach-pnx4008/pm.c | 1 - arch/arm/mach-sa1100/collie_pm.c | 1 - arch/arm/plat-iop/i2c.c | 1 - arch/arm/plat-iop/pci.c | 1 - arch/arm/plat-omap/fb.c | 1 - arch/arm/plat-omap/i2c.c | 1 - drivers/i2c/busses/i2c-davinci.c | 1 - drivers/i2c/chips/menelaus.c | 1 - drivers/ide/arm/ide_arm.c | 1 - drivers/input/keyboard/omap-keypad.c | 1 - drivers/input/keyboard/pxa27x_keypad.c | 1 - drivers/leds/leds-corgi.c | 1 - drivers/mmc/host/omap.c | 1 - drivers/net/ixp2000/ixpdev.c | 1 - drivers/usb/gadget/at91_udc.c | 1 - drivers/usb/gadget/s3c2410_udc.c | 1 - drivers/usb/host/ohci-at91.c | 1 - drivers/usb/host/ohci-ep93xx.c | 1 - drivers/usb/host/ohci-pnx4008.c | 1 - drivers/usb/host/ohci-pxa27x.c | 1 - drivers/video/omap/omapfb_main.c | 1 - include/asm-arm/arch-ixp23xx/memory.h | 1 - sound/soc/davinci/davinci-evm.c | 1 - sound/soc/s3c24xx/neo1973_wm8753.c | 1 - 43 files changed, 43 deletions(-) diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index dd3fbd6766e1..aa5ee49c5c5a 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -6,7 +6,6 @@ */ #include -#include .section ".start", "ax" diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 8822b684d474..7a1f9e3581fd 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -27,7 +27,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 5d78ffb8a9a7..27329bd32037 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -15,7 +15,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 464bdbbf74df..3ce0012928c4 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -24,7 +24,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index ca87587b2b4b..fc059ec4b021 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -27,7 +27,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 9cdcda500fe8..f064b7acb011 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -13,7 +13,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 8ab4feb1ec5b..a5cfe866c9dd 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c index 69f07b25b3c9..cffd06530781 100644 --- a/arch/arm/mach-iop13xx/irq.c +++ b/arch/arm/mach-iop13xx/irq.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c index ac297cd0276c..46318665f0dc 100644 --- a/arch/arm/mach-iop33x/uart.c +++ b/arch/arm/mach-iop33x/uart.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #define IOP33X_UART_XTAL 33334000 diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index df16a4eac490..9a1f18ddd3eb 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c index 227f808dc0ec..db24c43449d7 100644 --- a/arch/arm/mach-ixp23xx/pci.c +++ b/arch/arm/mach-ixp23xx/pci.c @@ -31,7 +31,6 @@ #include #include #include -#include #include extern int (*external_fault) (unsigned long, struct pt_regs *); diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c index d61762ae50d8..17c5ef13b0d1 100644 --- a/arch/arm/mach-ks8695/leds.c +++ b/arch/arm/mach-ks8695/leds.c @@ -12,7 +12,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index 0a29ef29c73a..4af6f4f06e82 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -25,7 +25,6 @@ #include #include #include -#include #include "crm_regs.h" diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c index 028ac4d33684..ede77f7e6c15 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -18,7 +18,6 @@ #include #include -#include #include /* diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c index d2964257797e..96de8ebed41d 100644 --- a/arch/arm/mach-ns9xxx/irq.c +++ b/arch/arm/mach-ns9xxx/irq.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index da8a3ac47e13..88b4b979a8bc 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -16,7 +16,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 742f79e73bd7..bb06de92daee 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -47,7 +47,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index d6c9de82ca0c..5e6e595d8eff 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c index 5ed67e1947a8..a3e20058e271 100644 --- a/arch/arm/mach-pnx4008/irq.c +++ b/arch/arm/mach-pnx4008/irq.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c index 40116d254349..52c51f91ed8a 100644 --- a/arch/arm/mach-pnx4008/pm.c +++ b/arch/arm/mach-pnx4008/pm.c @@ -20,7 +20,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c index 94620be7bfac..26ddb8ad4685 100644 --- a/arch/arm/mach-sa1100/collie_pm.c +++ b/arch/arm/mach-sa1100/collie_pm.c @@ -24,7 +24,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c index e99909bdba71..dad474c1516b 100644 --- a/arch/arm/plat-iop/i2c.c +++ b/arch/arm/plat-iop/i2c.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #ifdef CONFIG_ARCH_IOP32X diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index d9bc15a69e5d..06f114a25684 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -24,7 +24,6 @@ #include #include #include -#include // #define DEBUG diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index 5d107520e6b9..52002ac58bad 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -30,7 +30,6 @@ #include #include -#include #include #include diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 7990ab185bb1..647ed5971c60 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #define OMAP_I2C_SIZE 0x3f diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index af3846eda985..4f427a51243b 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -37,7 +37,6 @@ #include #include -#include #include diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c index b36db1797c11..e3c12e365c49 100644 --- a/drivers/i2c/chips/menelaus.c +++ b/drivers/i2c/chips/menelaus.c @@ -41,7 +41,6 @@ #include #include -#include #include #include diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c index 176532ffae0e..8a3bb23f8ae7 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/arm/ide_arm.c @@ -11,7 +11,6 @@ #include #include -#include #include #define DRV_NAME "ide_arm" diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 10afd2068068..435ac071aab3 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #undef NEW_BOARD_LEARNING_MODE diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 6f1516f50750..8a925359d82e 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -26,7 +26,6 @@ #include #include -#include #include #include diff --git a/drivers/leds/leds-corgi.c b/drivers/leds/leds-corgi.c index a709704b9f93..e9d419ff784e 100644 --- a/drivers/leds/leds-corgi.c +++ b/drivers/leds/leds-corgi.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index dbc26eb6a89e..1f587a239b02 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -29,7 +29,6 @@ #include #include -#include #include #include diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c index 7111c65f0b30..7b70c66504a0 100644 --- a/drivers/net/ixp2000/ixpdev.c +++ b/drivers/net/ixp2000/ixpdev.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include "ixp2400_rx.ucode" #include "ixp2400_tx.ucode" diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index e2d8a5d86c40..895fb6b96aed 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -44,7 +44,6 @@ #include #include #include -#include #include #include diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 6b1ef488043b..021955a57722 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -57,7 +57,6 @@ #include #include -#include #include "s3c2410_udc.h" diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index a5d8e550d897..3eae40f8743f 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -15,7 +15,6 @@ #include #include -#include #include #include diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index 5adaf36e47d0..e19b07d35ea8 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -28,7 +28,6 @@ #include #include -#include #include static struct clk *usb_host_clock; diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c index 6ad8f2fc57b9..037956a60bfa 100644 --- a/drivers/usb/host/ohci-pnx4008.c +++ b/drivers/usb/host/ohci-pnx4008.c @@ -23,7 +23,6 @@ #include #include -#include #include #include diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 127b15799024..1f516d6cf514 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -24,7 +24,6 @@ #include #include -#include #include #include #include /* FIXME: for PSSR */ diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index f85af5c4fa68..d9abc48a210b 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -28,7 +28,6 @@ #include #include -#include #include #include diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h index 6d859d742d7f..6940a14f32a0 100644 --- a/include/asm-arm/arch-ixp23xx/memory.h +++ b/include/asm-arm/arch-ixp23xx/memory.h @@ -28,7 +28,6 @@ * to an address that the kernel can use. */ #ifndef __ASSEMBLY__ -#include #define __virt_to_bus(v) \ ({ unsigned int ret; \ diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c index 5e2c306399ed..0722eebe3d6a 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/davinci/davinci-evm.c @@ -19,7 +19,6 @@ #include #include -#include #include #include diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c index 4d7a9aa15f1a..22e281ef639e 100644 --- a/sound/soc/s3c24xx/neo1973_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_wm8753.c @@ -24,7 +24,6 @@ #include #include -#include #include #include #include -- cgit v1.2.3 From be509729356b7433f73df2b9a966674a437fbbc1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 4 Aug 2008 10:41:28 +0100 Subject: [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King --- arch/arm/common/locomo.c | 2 +- arch/arm/common/sa1111.c | 2 +- arch/arm/common/sharpsl_pm.c | 2 +- arch/arm/common/time-acorn.c | 2 +- arch/arm/common/uengine.c | 1 - arch/arm/include/asm/hardware.h | 18 ------------------ arch/arm/include/asm/hardware/dec21285.h | 2 +- arch/arm/include/asm/hardware/iop3xx-adma.h | 2 +- arch/arm/include/asm/hardware/iop3xx-gpio.h | 2 +- arch/arm/include/asm/mtd-xip.h | 2 +- arch/arm/include/asm/pci.h | 2 +- arch/arm/include/asm/vga.h | 2 +- arch/arm/kernel/ecard.c | 2 +- arch/arm/lib/ecard.S | 2 +- arch/arm/lib/io-readsw-armv3.S | 2 +- arch/arm/lib/io-writesw-armv3.S | 2 +- arch/arm/mach-aaec2000/aaed2000.c | 2 +- arch/arm/mach-aaec2000/core.c | 2 +- arch/arm/mach-at91/at91x40_time.c | 2 +- arch/arm/mach-at91/board-1arm.c | 2 +- arch/arm/mach-at91/board-cam60.c | 2 +- arch/arm/mach-at91/board-cap9adk.c | 2 +- arch/arm/mach-at91/board-carmeva.c | 2 +- arch/arm/mach-at91/board-csb337.c | 2 +- arch/arm/mach-at91/board-csb637.c | 2 +- arch/arm/mach-at91/board-dk.c | 2 +- arch/arm/mach-at91/board-eb01.c | 2 +- arch/arm/mach-at91/board-eb9200.c | 2 +- arch/arm/mach-at91/board-ecbat91.c | 2 +- arch/arm/mach-at91/board-ek.c | 2 +- arch/arm/mach-at91/board-kafa.c | 2 +- arch/arm/mach-at91/board-kb9202.c | 2 +- arch/arm/mach-at91/board-picotux200.c | 2 +- arch/arm/mach-at91/board-qil-a9260.c | 2 +- arch/arm/mach-at91/board-sam9-l9260.c | 2 +- arch/arm/mach-at91/board-sam9260ek.c | 2 +- arch/arm/mach-at91/board-sam9261ek.c | 2 +- arch/arm/mach-at91/board-sam9263ek.c | 2 +- arch/arm/mach-at91/board-sam9g20ek.c | 2 +- arch/arm/mach-at91/board-sam9rlek.c | 2 +- arch/arm/mach-at91/board-usb-a9260.c | 2 +- arch/arm/mach-at91/board-usb-a9263.c | 2 +- arch/arm/mach-at91/board-yl-9200.c | 2 +- arch/arm/mach-at91/clock.c | 2 +- arch/arm/mach-at91/gpio.c | 2 +- arch/arm/mach-at91/irq.c | 2 +- arch/arm/mach-clps711x/autcpu12.c | 2 +- arch/arm/mach-clps711x/cdb89712.c | 2 +- arch/arm/mach-clps711x/ceiva.c | 2 +- arch/arm/mach-clps711x/edb7211-mm.c | 2 +- arch/arm/mach-clps711x/fortunet.c | 2 +- arch/arm/mach-clps711x/irq.c | 2 +- arch/arm/mach-clps711x/mm.c | 2 +- arch/arm/mach-clps711x/p720t-leds.c | 2 +- arch/arm/mach-clps711x/p720t.c | 2 +- arch/arm/mach-clps711x/time.c | 2 +- arch/arm/mach-clps7500/core.c | 2 +- arch/arm/mach-davinci/board-evm.c | 2 +- arch/arm/mach-davinci/clock.c | 2 +- arch/arm/mach-davinci/irq.c | 2 +- arch/arm/mach-davinci/mux.c | 2 +- arch/arm/mach-davinci/psc.c | 2 +- arch/arm/mach-davinci/serial.c | 2 +- arch/arm/mach-davinci/time.c | 2 +- arch/arm/mach-ebsa110/core.c | 2 +- arch/arm/mach-ebsa110/io.c | 2 +- arch/arm/mach-ebsa110/leds.c | 2 +- arch/arm/mach-ep93xx/adssphere.c | 2 +- arch/arm/mach-ep93xx/clock.c | 2 +- arch/arm/mach-ep93xx/core.c | 2 +- arch/arm/mach-ep93xx/edb9302.c | 2 +- arch/arm/mach-ep93xx/edb9302a.c | 2 +- arch/arm/mach-ep93xx/edb9307.c | 2 +- arch/arm/mach-ep93xx/edb9312.c | 2 +- arch/arm/mach-ep93xx/edb9315.c | 2 +- arch/arm/mach-ep93xx/edb9315a.c | 2 +- arch/arm/mach-ep93xx/gesbc9312.c | 2 +- arch/arm/mach-ep93xx/micro9.c | 2 +- arch/arm/mach-ep93xx/ts72xx.c | 2 +- arch/arm/mach-footbridge/ebsa285-leds.c | 2 +- arch/arm/mach-footbridge/isa-irq.c | 2 +- arch/arm/mach-footbridge/netwinder-leds.c | 2 +- arch/arm/mach-footbridge/time.c | 2 +- arch/arm/mach-h720x/common.c | 2 +- arch/arm/mach-h720x/cpu-h7201.c | 2 +- arch/arm/mach-h720x/cpu-h7202.c | 2 +- arch/arm/mach-h720x/h7201-eval.c | 2 +- arch/arm/mach-h720x/h7202-eval.c | 2 +- arch/arm/mach-imx/cpufreq.c | 2 +- arch/arm/mach-imx/dma.c | 2 +- arch/arm/mach-imx/generic.c | 2 +- arch/arm/mach-imx/irq.c | 2 +- arch/arm/mach-imx/leds-mx1ads.c | 2 +- arch/arm/mach-imx/mx1ads.c | 2 +- arch/arm/mach-imx/time.c | 2 +- arch/arm/mach-integrator/core.c | 2 +- arch/arm/mach-integrator/cpu.c | 2 +- arch/arm/mach-integrator/integrator_ap.c | 2 +- arch/arm/mach-integrator/integrator_cp.c | 2 +- arch/arm/mach-integrator/leds.c | 2 +- arch/arm/mach-integrator/pci_v3.c | 2 +- arch/arm/mach-iop13xx/io.c | 2 +- arch/arm/mach-iop13xx/iq81340mc.c | 2 +- arch/arm/mach-iop13xx/iq81340sc.c | 2 +- arch/arm/mach-iop13xx/irq.c | 2 +- arch/arm/mach-iop13xx/pci.c | 2 +- arch/arm/mach-iop13xx/setup.c | 2 +- arch/arm/mach-iop32x/em7210.c | 2 +- arch/arm/mach-iop32x/glantank.c | 2 +- arch/arm/mach-iop32x/iq31244.c | 2 +- arch/arm/mach-iop32x/iq80321.c | 2 +- arch/arm/mach-iop32x/irq.c | 2 +- arch/arm/mach-iop32x/n2100.c | 2 +- arch/arm/mach-iop33x/iq80331.c | 2 +- arch/arm/mach-iop33x/iq80332.c | 2 +- arch/arm/mach-iop33x/irq.c | 2 +- arch/arm/mach-iop33x/uart.c | 2 +- arch/arm/mach-ixp2000/core.c | 2 +- arch/arm/mach-ixp2000/enp2611.c | 2 +- arch/arm/mach-ixp2000/ixdp2400.c | 2 +- arch/arm/mach-ixp2000/ixdp2800.c | 2 +- arch/arm/mach-ixp2000/ixdp2x00.c | 2 +- arch/arm/mach-ixp2000/ixdp2x01.c | 2 +- arch/arm/mach-ixp2000/pci.c | 2 +- arch/arm/mach-ixp23xx/core.c | 2 +- arch/arm/mach-ixp23xx/espresso.c | 2 +- arch/arm/mach-ixp23xx/ixdp2351.c | 2 +- arch/arm/mach-ixp23xx/pci.c | 2 +- arch/arm/mach-ixp23xx/roadrunner.c | 2 +- arch/arm/mach-ixp4xx/avila-pci.c | 2 +- arch/arm/mach-ixp4xx/avila-setup.c | 2 +- arch/arm/mach-ixp4xx/common-pci.c | 2 +- arch/arm/mach-ixp4xx/common.c | 2 +- arch/arm/mach-ixp4xx/coyote-pci.c | 2 +- arch/arm/mach-ixp4xx/coyote-setup.c | 2 +- arch/arm/mach-ixp4xx/gateway7001-pci.c | 2 +- arch/arm/mach-ixp4xx/gateway7001-setup.c | 2 +- arch/arm/mach-ixp4xx/gtwx5715-pci.c | 2 +- arch/arm/mach-ixp4xx/gtwx5715-setup.c | 2 +- arch/arm/mach-ixp4xx/ixdp425-pci.c | 2 +- arch/arm/mach-ixp4xx/ixdp425-setup.c | 2 +- arch/arm/mach-ixp4xx/ixdpg425-pci.c | 2 +- arch/arm/mach-ixp4xx/wg302v2-pci.c | 2 +- arch/arm/mach-ixp4xx/wg302v2-setup.c | 2 +- arch/arm/mach-kirkwood/addr-map.c | 2 +- arch/arm/mach-ks8695/cpu.c | 2 +- arch/arm/mach-ks8695/gpio.c | 2 +- arch/arm/mach-ks8695/irq.c | 2 +- arch/arm/mach-ks8695/pci.c | 2 +- arch/arm/mach-l7200/core.c | 2 +- arch/arm/mach-lh7a40x/arch-kev7a400.c | 2 +- arch/arm/mach-lh7a40x/arch-lpd7a40x.c | 2 +- arch/arm/mach-lh7a40x/clcd.c | 3 +-- arch/arm/mach-lh7a40x/clocks.c | 2 +- arch/arm/mach-lh7a40x/irq-lh7a400.c | 2 +- arch/arm/mach-lh7a40x/irq-lh7a404.c | 2 +- arch/arm/mach-lh7a40x/irq-lpd7a40x.c | 2 +- arch/arm/mach-lh7a40x/ssp-cpld.c | 2 +- arch/arm/mach-lh7a40x/time.c | 2 +- arch/arm/mach-loki/addr-map.c | 2 +- arch/arm/mach-msm/board-halibut.c | 2 +- arch/arm/mach-msm/io.c | 2 +- arch/arm/mach-msm/irq.c | 2 +- arch/arm/mach-mx2/cpu_imx27.c | 2 +- arch/arm/mach-mx2/devices.c | 2 +- arch/arm/mach-mx2/generic.c | 2 +- arch/arm/mach-mx2/mx27ads.c | 2 +- arch/arm/mach-mx2/pcm038.c | 2 +- arch/arm/mach-mx2/pcm970-baseboard.c | 2 +- arch/arm/mach-mx2/serial.c | 2 +- arch/arm/mach-mx3/devices.c | 2 +- arch/arm/mach-mx3/iomux.c | 2 +- arch/arm/mach-mx3/mm.c | 2 +- arch/arm/mach-mx3/mx31ads.c | 2 +- arch/arm/mach-mx3/mx31lite.c | 2 +- arch/arm/mach-mx3/pcm037.c | 2 +- arch/arm/mach-netx/fb.c | 2 +- arch/arm/mach-netx/generic.c | 2 +- arch/arm/mach-netx/nxdb500.c | 2 +- arch/arm/mach-netx/nxdkn.c | 2 +- arch/arm/mach-netx/nxeb500hmi.c | 2 +- arch/arm/mach-netx/pfifo.c | 2 +- arch/arm/mach-netx/time.c | 2 +- arch/arm/mach-netx/xc.c | 2 +- arch/arm/mach-omap1/board-ams-delta.c | 2 +- arch/arm/mach-omap1/board-fsample.c | 2 +- arch/arm/mach-omap1/board-generic.c | 2 +- arch/arm/mach-omap1/board-h2.c | 2 +- arch/arm/mach-omap1/board-h3.c | 2 +- arch/arm/mach-omap1/board-innovator.c | 2 +- arch/arm/mach-omap1/board-nokia770.c | 2 +- arch/arm/mach-omap1/board-osk.c | 2 +- arch/arm/mach-omap1/board-palmte.c | 2 +- arch/arm/mach-omap1/board-palmtt.c | 2 +- arch/arm/mach-omap1/board-palmz71.c | 2 +- arch/arm/mach-omap1/board-perseus2.c | 2 +- arch/arm/mach-omap1/board-sx1.c | 2 +- arch/arm/mach-omap1/board-voiceblue.c | 2 +- arch/arm/mach-omap1/devices.c | 2 +- arch/arm/mach-omap1/fpga.c | 2 +- arch/arm/mach-omap1/irq.c | 2 +- arch/arm/mach-omap1/leds-h2p2-debug.c | 2 +- arch/arm/mach-omap1/leds-innovator.c | 2 +- arch/arm/mach-omap1/leds-osk.c | 2 +- arch/arm/mach-omap1/sram.S | 2 +- arch/arm/mach-omap1/time.c | 2 +- arch/arm/mach-omap1/timer32k.c | 2 +- arch/arm/mach-omap2/board-2430sdp.c | 2 +- arch/arm/mach-omap2/board-apollon.c | 2 +- arch/arm/mach-omap2/board-generic.c | 2 +- arch/arm/mach-omap2/board-h4.c | 2 +- arch/arm/mach-omap2/devices.c | 2 +- arch/arm/mach-omap2/irq.c | 2 +- arch/arm/mach-omap2/sram242x.S | 2 +- arch/arm/mach-omap2/sram243x.S | 2 +- arch/arm/mach-orion5x/addr-map.c | 2 +- arch/arm/mach-orion5x/mpp.c | 2 +- arch/arm/mach-pnx4008/clock.c | 2 +- arch/arm/mach-pnx4008/core.c | 2 +- arch/arm/mach-pnx4008/dma.c | 2 +- arch/arm/mach-pnx4008/irq.c | 2 +- arch/arm/mach-pnx4008/serial.c | 2 +- arch/arm/mach-pnx4008/sleep.S | 2 +- arch/arm/mach-pnx4008/time.c | 2 +- arch/arm/mach-pxa/clock.c | 2 +- arch/arm/mach-pxa/colibri.c | 2 +- arch/arm/mach-pxa/corgi.c | 2 +- arch/arm/mach-pxa/corgi_lcd.c | 2 +- arch/arm/mach-pxa/corgi_pm.c | 2 +- arch/arm/mach-pxa/corgi_ssp.c | 2 +- arch/arm/mach-pxa/cpu-pxa.c | 2 +- arch/arm/mach-pxa/dma.c | 2 +- arch/arm/mach-pxa/generic.c | 2 +- arch/arm/mach-pxa/gpio.c | 2 +- arch/arm/mach-pxa/gumstix.c | 2 +- arch/arm/mach-pxa/idp.c | 2 +- arch/arm/mach-pxa/irq.c | 2 +- arch/arm/mach-pxa/leds-idp.c | 2 +- arch/arm/mach-pxa/leds-lubbock.c | 2 +- arch/arm/mach-pxa/leds-mainstone.c | 2 +- arch/arm/mach-pxa/leds-trizeps4.c | 2 +- arch/arm/mach-pxa/littleton.c | 2 +- arch/arm/mach-pxa/lpd270.c | 2 +- arch/arm/mach-pxa/lubbock.c | 2 +- arch/arm/mach-pxa/magician.c | 2 +- arch/arm/mach-pxa/mainstone.c | 2 +- arch/arm/mach-pxa/mfp-pxa3xx.c | 2 +- arch/arm/mach-pxa/pm.c | 2 +- arch/arm/mach-pxa/poodle.c | 2 +- arch/arm/mach-pxa/pxa25x.c | 2 +- arch/arm/mach-pxa/pxa27x.c | 2 +- arch/arm/mach-pxa/pxa300.c | 2 +- arch/arm/mach-pxa/pxa320.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 2 +- arch/arm/mach-pxa/pxa930.c | 2 +- arch/arm/mach-pxa/saar.c | 2 +- arch/arm/mach-pxa/sharpsl_pm.c | 2 +- arch/arm/mach-pxa/sleep.S | 2 +- arch/arm/mach-pxa/spitz.c | 2 +- arch/arm/mach-pxa/spitz_pm.c | 2 +- arch/arm/mach-pxa/ssp.c | 2 +- arch/arm/mach-pxa/standby.S | 2 +- arch/arm/mach-pxa/tavorevb.c | 2 +- arch/arm/mach-pxa/trizeps4.c | 2 +- arch/arm/mach-pxa/zylonite.c | 2 +- arch/arm/mach-realview/core.c | 2 +- arch/arm/mach-realview/localtimer.c | 2 +- arch/arm/mach-realview/platsmp.c | 2 +- arch/arm/mach-realview/realview_eb.c | 2 +- arch/arm/mach-realview/realview_pb1176.c | 2 +- arch/arm/mach-realview/realview_pb11mp.c | 2 +- arch/arm/mach-rpc/dma.c | 2 +- arch/arm/mach-rpc/riscpc.c | 2 +- arch/arm/mach-s3c2400/gpio.c | 2 +- arch/arm/mach-s3c2410/bast-irq.c | 2 +- arch/arm/mach-s3c2410/clock.c | 2 +- arch/arm/mach-s3c2410/gpio.c | 2 +- arch/arm/mach-s3c2410/h1940-bluetooth.c | 2 +- arch/arm/mach-s3c2410/mach-amlm5900.c | 2 +- arch/arm/mach-s3c2410/mach-bast.c | 2 +- arch/arm/mach-s3c2410/mach-h1940.c | 2 +- arch/arm/mach-s3c2410/mach-n30.c | 2 +- arch/arm/mach-s3c2410/mach-otom.c | 2 +- arch/arm/mach-s3c2410/mach-qt2410.c | 2 +- arch/arm/mach-s3c2410/mach-smdk2410.c | 2 +- arch/arm/mach-s3c2410/mach-tct_hammer.c | 2 +- arch/arm/mach-s3c2410/mach-vr1000.c | 2 +- arch/arm/mach-s3c2410/pm-h1940.S | 2 +- arch/arm/mach-s3c2410/pm.c | 2 +- arch/arm/mach-s3c2410/s3c2410.c | 2 +- arch/arm/mach-s3c2410/sleep.S | 2 +- arch/arm/mach-s3c2410/usb-simtec.c | 2 +- arch/arm/mach-s3c2412/clock.c | 2 +- arch/arm/mach-s3c2412/gpio.c | 2 +- arch/arm/mach-s3c2412/irq.c | 2 +- arch/arm/mach-s3c2412/mach-smdk2413.c | 2 +- arch/arm/mach-s3c2412/mach-vstms.c | 2 +- arch/arm/mach-s3c2412/pm.c | 2 +- arch/arm/mach-s3c2412/s3c2412.c | 2 +- arch/arm/mach-s3c2412/sleep.S | 2 +- arch/arm/mach-s3c2440/clock.c | 2 +- arch/arm/mach-s3c2440/dsc.c | 2 +- arch/arm/mach-s3c2440/irq.c | 2 +- arch/arm/mach-s3c2440/mach-anubis.c | 2 +- arch/arm/mach-s3c2440/mach-at2440evb.c | 2 +- arch/arm/mach-s3c2440/mach-nexcoder.c | 2 +- arch/arm/mach-s3c2440/mach-osiris.c | 2 +- arch/arm/mach-s3c2440/mach-rx3715.c | 2 +- arch/arm/mach-s3c2440/mach-smdk2440.c | 2 +- arch/arm/mach-s3c2440/s3c2440.c | 2 +- arch/arm/mach-s3c2442/clock.c | 2 +- arch/arm/mach-s3c2443/clock.c | 2 +- arch/arm/mach-s3c2443/irq.c | 2 +- arch/arm/mach-s3c2443/mach-smdk2443.c | 2 +- arch/arm/mach-s3c2443/s3c2443.c | 2 +- arch/arm/mach-sa1100/assabet.c | 2 +- arch/arm/mach-sa1100/badge4.c | 2 +- arch/arm/mach-sa1100/cerf.c | 2 +- arch/arm/mach-sa1100/clock.c | 2 +- arch/arm/mach-sa1100/collie.c | 2 +- arch/arm/mach-sa1100/collie_pm.c | 2 +- arch/arm/mach-sa1100/cpu-sa1100.c | 2 +- arch/arm/mach-sa1100/cpu-sa1110.c | 2 +- arch/arm/mach-sa1100/dma.c | 2 +- arch/arm/mach-sa1100/generic.c | 2 +- arch/arm/mach-sa1100/gpio.c | 2 +- arch/arm/mach-sa1100/h3600.c | 2 +- arch/arm/mach-sa1100/hackkit.c | 2 +- arch/arm/mach-sa1100/irq.c | 2 +- arch/arm/mach-sa1100/jornada720.c | 2 +- arch/arm/mach-sa1100/jornada720_ssp.c | 2 +- arch/arm/mach-sa1100/lart.c | 2 +- arch/arm/mach-sa1100/leds-assabet.c | 2 +- arch/arm/mach-sa1100/leds-badge4.c | 2 +- arch/arm/mach-sa1100/leds-cerf.c | 2 +- arch/arm/mach-sa1100/leds-hackkit.c | 2 +- arch/arm/mach-sa1100/leds-lart.c | 2 +- arch/arm/mach-sa1100/leds-simpad.c | 2 +- arch/arm/mach-sa1100/neponset.c | 2 +- arch/arm/mach-sa1100/pleb.c | 2 +- arch/arm/mach-sa1100/pm.c | 2 +- arch/arm/mach-sa1100/shannon.c | 2 +- arch/arm/mach-sa1100/simpad.c | 2 +- arch/arm/mach-sa1100/sleep.S | 2 +- arch/arm/mach-sa1100/ssp.c | 2 +- arch/arm/mach-sa1100/time.c | 2 +- arch/arm/mach-shark/leds.c | 2 +- arch/arm/mach-versatile/core.c | 2 +- arch/arm/mach-versatile/pci.c | 2 +- arch/arm/mach-versatile/versatile_ab.c | 2 +- arch/arm/mach-versatile/versatile_pb.c | 2 +- arch/arm/mm/cache-v3.S | 2 +- arch/arm/mm/cache-v4.S | 2 +- arch/arm/mm/cache-v4wt.S | 2 +- arch/arm/mm/proc-sa110.S | 2 +- arch/arm/mm/proc-sa1100.S | 2 +- arch/arm/mm/proc-xsc3.S | 2 +- arch/arm/oprofile/op_model_mpcore.c | 2 +- arch/arm/plat-iop/i2c.c | 2 +- arch/arm/plat-iop/io.c | 2 +- arch/arm/plat-iop/pci.c | 2 +- arch/arm/plat-iop/time.c | 2 +- arch/arm/plat-mxc/gpio.c | 2 +- arch/arm/plat-mxc/iomux-mx1-mx2.c | 2 +- arch/arm/plat-mxc/time.c | 2 +- arch/arm/plat-omap/common.c | 2 +- arch/arm/plat-omap/cpu-omap.c | 2 +- arch/arm/plat-omap/debug-devices.c | 2 +- arch/arm/plat-omap/debug-leds.c | 2 +- arch/arm/plat-omap/devices.c | 2 +- arch/arm/plat-omap/dma.c | 2 +- arch/arm/plat-omap/dmtimer.c | 2 +- arch/arm/plat-omap/fb.c | 2 +- arch/arm/plat-omap/gpio.c | 2 +- arch/arm/plat-omap/ocpi.c | 2 +- arch/arm/plat-omap/usb.c | 2 +- arch/arm/plat-s3c24xx/clock.c | 2 +- arch/arm/plat-s3c24xx/common-smdk.c | 2 +- arch/arm/plat-s3c24xx/cpu.c | 2 +- arch/arm/plat-s3c24xx/devs.c | 2 +- arch/arm/plat-s3c24xx/dma.c | 2 +- arch/arm/plat-s3c24xx/gpio.c | 2 +- arch/arm/plat-s3c24xx/gpiolib.c | 2 +- arch/arm/plat-s3c24xx/irq.c | 2 +- arch/arm/plat-s3c24xx/pm-simtec.c | 2 +- arch/arm/plat-s3c24xx/pm.c | 2 +- arch/arm/plat-s3c24xx/pwm-clock.c | 2 +- arch/arm/plat-s3c24xx/s3c244x-clock.c | 2 +- arch/arm/plat-s3c24xx/s3c244x-irq.c | 2 +- arch/arm/plat-s3c24xx/s3c244x.c | 2 +- arch/arm/plat-s3c24xx/sleep.S | 2 +- drivers/char/ds1620.c | 2 +- drivers/char/hw_random/ixp4xx-rng.c | 2 +- drivers/i2c/busses/i2c-acorn.c | 2 +- drivers/i2c/busses/i2c-davinci.c | 2 +- drivers/i2c/busses/i2c-ixp2000.c | 2 +- drivers/i2c/busses/i2c-pnx.c | 2 +- drivers/i2c/busses/i2c-pxa.c | 2 +- drivers/i2c/busses/i2c-s3c2410.c | 2 +- drivers/input/keyboard/jornada720_kbd.c | 2 +- drivers/input/keyboard/omap-keypad.c | 2 +- drivers/input/misc/ixp4xx-beeper.c | 2 +- drivers/input/mouse/rpcmouse.c | 2 +- drivers/input/serio/rpckbd.c | 2 +- drivers/input/touchscreen/jornada720_ts.c | 2 +- drivers/leds/leds-h1940.c | 2 +- drivers/leds/leds-locomo.c | 2 +- drivers/leds/leds-s3c24xx.c | 2 +- drivers/mfd/mcp-sa11x0.c | 2 +- drivers/mfd/ucb1x00-core.c | 2 +- drivers/mtd/maps/autcpu12-nvram.c | 2 +- drivers/mtd/maps/ceiva.c | 2 +- drivers/mtd/maps/h720x-flash.c | 2 +- drivers/mtd/maps/integrator-flash.c | 2 +- drivers/mtd/maps/ipaq-flash.c | 2 +- drivers/mtd/maps/ixp2000.c | 2 +- drivers/mtd/maps/omap_nor.c | 2 +- drivers/mtd/maps/pxa2xx-flash.c | 2 +- drivers/mtd/maps/sa1100-flash.c | 2 +- drivers/mtd/nand/sharpsl.c | 2 +- drivers/net/arm/am79c961a.c | 2 +- drivers/net/irda/ep7211-sir.c | 2 +- drivers/net/irda/sa1100_ir.c | 2 +- drivers/net/ixp2000/ixp2400-msf.c | 2 +- drivers/net/netx-eth.c | 1 - drivers/pcmcia/at91_cf.c | 2 +- drivers/pcmcia/omap_cf.c | 2 +- drivers/pcmcia/pxa2xx_base.c | 2 +- drivers/pcmcia/pxa2xx_lubbock.c | 2 +- drivers/pcmcia/pxa2xx_mainstone.c | 2 +- drivers/pcmcia/pxa2xx_sharpsl.c | 2 +- drivers/pcmcia/sa1100_assabet.c | 2 +- drivers/pcmcia/sa1100_badge4.c | 2 +- drivers/pcmcia/sa1100_cerf.c | 2 +- drivers/pcmcia/sa1100_h3600.c | 2 +- drivers/pcmcia/sa1100_jornada720.c | 2 +- drivers/pcmcia/sa1100_neponset.c | 2 +- drivers/pcmcia/sa1100_shannon.c | 2 +- drivers/pcmcia/sa1100_simpad.c | 2 +- drivers/pcmcia/sa1111_generic.c | 2 +- drivers/pcmcia/sa11xx_base.c | 2 +- drivers/pcmcia/soc_common.c | 2 +- drivers/rtc/rtc-ep93xx.c | 2 +- drivers/rtc/rtc-s3c.c | 2 +- drivers/rtc/rtc-sa1100.c | 2 +- drivers/scsi/arm/acornscsi-io.S | 2 +- drivers/serial/21285.c | 2 +- drivers/serial/clps711x.c | 2 +- drivers/serial/imx.c | 2 +- drivers/serial/netx-serial.c | 2 +- drivers/serial/pxa.c | 2 +- drivers/serial/s3c2400.c | 2 +- drivers/serial/s3c2410.c | 2 +- drivers/serial/s3c2412.c | 2 +- drivers/serial/s3c2440.c | 2 +- drivers/serial/sa1100.c | 2 +- drivers/serial/samsung.c | 2 +- drivers/spi/omap_uwire.c | 2 +- drivers/spi/pxa2xx_spi.c | 1 - drivers/spi/spi_imx.c | 1 - drivers/spi/spi_s3c24xx.c | 2 +- drivers/spi/spi_s3c24xx_gpio.c | 2 +- drivers/usb/gadget/at91_udc.c | 2 +- drivers/usb/gadget/lh7a40x_udc.h | 2 +- drivers/usb/gadget/pxa27x_udc.c | 2 +- drivers/usb/host/ohci-at91.c | 2 +- drivers/usb/host/ohci-ep93xx.c | 2 +- drivers/usb/host/ohci-lh7a404.c | 2 +- drivers/usb/host/ohci-omap.c | 2 +- drivers/usb/host/ohci-pnx4008.c | 2 +- drivers/usb/host/ohci-pxa27x.c | 2 +- drivers/usb/host/ohci-s3c2410.c | 2 +- drivers/usb/host/ohci-sa1111.c | 2 +- drivers/video/acornfb.c | 2 +- drivers/video/clps711xfb.c | 2 +- drivers/video/imxfb.c | 2 +- drivers/video/pxafb.c | 2 +- drivers/video/sa1100fb.c | 2 +- drivers/watchdog/davinci_wdt.c | 2 +- drivers/watchdog/ep93xx_wdt.c | 2 +- drivers/watchdog/iop_wdt.c | 2 +- drivers/watchdog/ixp2000_wdt.c | 2 +- drivers/watchdog/ixp4xx_wdt.c | 2 +- drivers/watchdog/omap_wdt.c | 2 +- drivers/watchdog/pnx4008_wdt.c | 2 +- drivers/watchdog/sa1100_wdt.c | 2 +- drivers/watchdog/wdt285.c | 2 +- include/asm-arm/arch-aaec2000/io.h | 2 +- include/asm-arm/arch-at91/cpu.h | 2 +- include/asm-arm/arch-at91/debug-macro.S | 2 +- include/asm-arm/arch-at91/entry-macro.S | 2 +- include/asm-arm/arch-at91/memory.h | 2 +- include/asm-arm/arch-at91/system.h | 2 +- include/asm-arm/arch-at91/timex.h | 2 +- include/asm-arm/arch-cl7500/entry-macro.S | 2 +- include/asm-arm/arch-cl7500/io.h | 2 +- include/asm-arm/arch-clps711x/entry-macro.S | 2 +- include/asm-arm/arch-clps711x/io.h | 2 +- include/asm-arm/arch-clps711x/system.h | 2 +- include/asm-arm/arch-clps711x/uncompress.h | 2 +- include/asm-arm/arch-davinci/gpio.h | 2 +- include/asm-arm/arch-davinci/system.h | 2 +- include/asm-arm/arch-ebsa285/entry-macro.S | 2 +- include/asm-arm/arch-ebsa285/io.h | 2 +- include/asm-arm/arch-ebsa285/system.h | 2 +- include/asm-arm/arch-ep93xx/hardware.h | 4 ++++ include/asm-arm/arch-ep93xx/system.h | 2 +- include/asm-arm/arch-h720x/io.h | 2 +- include/asm-arm/arch-h720x/system.h | 2 +- include/asm-arm/arch-h720x/uncompress.h | 2 +- include/asm-arm/arch-imx/entry-macro.S | 2 +- include/asm-arm/arch-imx/io.h | 2 +- include/asm-arm/arch-imx/irqs.h | 2 +- include/asm-arm/arch-integrator/entry-macro.S | 2 +- include/asm-arm/arch-iop13xx/adma.h | 2 +- include/asm-arm/arch-iop13xx/timex.h | 2 +- include/asm-arm/arch-iop13xx/uncompress.h | 2 +- include/asm-arm/arch-iop32x/io.h | 2 +- include/asm-arm/arch-iop32x/memory.h | 2 +- include/asm-arm/arch-iop32x/timex.h | 2 +- include/asm-arm/arch-iop32x/uncompress.h | 2 +- include/asm-arm/arch-iop33x/io.h | 2 +- include/asm-arm/arch-iop33x/memory.h | 2 +- include/asm-arm/arch-iop33x/timex.h | 2 +- include/asm-arm/arch-iop33x/uncompress.h | 2 +- include/asm-arm/arch-ixp2000/io.h | 2 +- include/asm-arm/arch-ixp2000/system.h | 2 +- include/asm-arm/arch-ixp23xx/memory.h | 2 +- include/asm-arm/arch-ixp23xx/system.h | 2 +- include/asm-arm/arch-ixp4xx/avila.h | 2 +- include/asm-arm/arch-ixp4xx/coyote.h | 2 +- include/asm-arm/arch-ixp4xx/dma.h | 2 +- include/asm-arm/arch-ixp4xx/dsmg600.h | 2 +- include/asm-arm/arch-ixp4xx/entry-macro.S | 2 +- include/asm-arm/arch-ixp4xx/fsg.h | 2 +- include/asm-arm/arch-ixp4xx/gpio.h | 2 +- include/asm-arm/arch-ixp4xx/gtwx5715.h | 2 +- include/asm-arm/arch-ixp4xx/io.h | 2 +- include/asm-arm/arch-ixp4xx/ixdp425.h | 2 +- include/asm-arm/arch-ixp4xx/nas100d.h | 2 +- include/asm-arm/arch-ixp4xx/nslu2.h | 2 +- include/asm-arm/arch-ixp4xx/platform.h | 2 +- include/asm-arm/arch-ixp4xx/prpmc1100.h | 2 +- include/asm-arm/arch-ixp4xx/system.h | 2 +- include/asm-arm/arch-ixp4xx/timex.h | 2 +- include/asm-arm/arch-ks8695/debug-macro.S | 2 +- include/asm-arm/arch-ks8695/entry-macro.S | 2 +- include/asm-arm/arch-ks8695/memory.h | 2 +- include/asm-arm/arch-l7200/aux_reg.h | 2 +- include/asm-arm/arch-l7200/entry-macro.S | 2 +- include/asm-arm/arch-l7200/gp_timers.h | 2 +- include/asm-arm/arch-l7200/io.h | 2 +- include/asm-arm/arch-l7200/system.h | 2 +- include/asm-arm/arch-l7200/uncompress.h | 2 +- include/asm-arm/arch-lh7a40x/entry-macro.S | 2 +- include/asm-arm/arch-lh7a40x/io.h | 2 +- include/asm-arm/arch-msm/debug-macro.S | 2 +- include/asm-arm/arch-msm/system.h | 2 +- include/asm-arm/arch-mxc/gpio.h | 2 +- include/asm-arm/arch-mxc/irqs.h | 2 +- include/asm-arm/arch-mxc/memory.h | 2 +- include/asm-arm/arch-mxc/mxc_timer.h | 2 +- include/asm-arm/arch-mxc/timex.h | 2 +- include/asm-arm/arch-mxc/uncompress.h | 2 +- include/asm-arm/arch-netx/entry-macro.S | 2 +- include/asm-arm/arch-netx/system.h | 2 +- include/asm-arm/arch-ns9xxx/debug-macro.S | 2 +- include/asm-arm/arch-ns9xxx/entry-macro.S | 2 +- include/asm-arm/arch-ns9xxx/regs-bbu.h | 2 +- include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h | 2 +- include/asm-arm/arch-ns9xxx/regs-mem.h | 2 +- include/asm-arm/arch-ns9xxx/regs-sys-common.h | 2 +- include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h | 2 +- include/asm-arm/arch-omap/entry-macro.S | 2 +- include/asm-arm/arch-omap/io.h | 2 +- include/asm-arm/arch-omap/irqs.h | 2 +- include/asm-arm/arch-omap/mcbsp.h | 2 +- include/asm-arm/arch-omap/mtd-xip.h | 2 +- include/asm-arm/arch-omap/system.h | 2 +- include/asm-arm/arch-pnx4008/system.h | 2 +- include/asm-arm/arch-pnx4008/timex.h | 2 +- include/asm-arm/arch-pxa/entry-macro.S | 2 +- include/asm-arm/arch-pxa/gpio.h | 2 +- include/asm-arm/arch-pxa/io.h | 2 +- include/asm-arm/arch-realview/entry-macro.S | 2 +- include/asm-arm/arch-realview/system.h | 2 +- include/asm-arm/arch-realview/uncompress.h | 2 +- include/asm-arm/arch-rpc/entry-macro.S | 2 +- include/asm-arm/arch-rpc/io.h | 2 +- include/asm-arm/arch-rpc/system.h | 2 +- include/asm-arm/arch-rpc/uncompress.h | 2 +- include/asm-arm/arch-s3c2410/dma.h | 2 +- include/asm-arm/arch-s3c2410/entry-macro.S | 2 +- include/asm-arm/arch-s3c2410/hardware.h | 4 ---- include/asm-arm/arch-s3c2410/io.h | 2 +- include/asm-arm/arch-s3c2410/system-reset.h | 2 +- include/asm-arm/arch-s3c2410/system.h | 2 +- include/asm-arm/arch-sa1100/badge4.h | 2 +- include/asm-arm/arch-sa1100/debug-macro.S | 2 +- include/asm-arm/arch-sa1100/gpio.h | 2 +- include/asm-arm/arch-sa1100/ide.h | 2 +- include/asm-arm/arch-sa1100/system.h | 2 +- include/asm-arm/arch-shark/io.h | 2 +- include/asm-arm/arch-versatile/entry-macro.S | 2 +- include/asm-arm/arch-versatile/system.h | 2 +- sound/arm/pxa2xx-ac97.c | 2 +- sound/arm/pxa2xx-pcm.c | 2 +- sound/arm/sa11xx-uda1341.c | 2 +- sound/oss/vidc.c | 2 +- sound/oss/vidc_fill.S | 2 +- sound/oss/waveartist.c | 2 +- sound/soc/at91/eti_b1_wm8731.c | 2 +- sound/soc/pxa/pxa2xx-ac97.c | 2 +- sound/soc/pxa/pxa2xx-i2s.c | 2 +- sound/soc/pxa/pxa2xx-pcm.c | 2 +- sound/soc/s3c24xx/neo1973_wm8753.c | 2 +- sound/soc/s3c24xx/s3c2412-i2s.c | 2 +- sound/soc/s3c24xx/s3c2443-ac97.c | 2 +- sound/soc/s3c24xx/s3c24xx-i2s.c | 2 +- sound/soc/s3c24xx/s3c24xx-pcm.c | 2 +- 620 files changed, 617 insertions(+), 640 deletions(-) delete mode 100644 arch/arm/include/asm/hardware.h diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 85579654d3b7..1f0f0adeafb3 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -25,7 +25,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index f6d3fdda7067..64c328d1627f 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -26,7 +26,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 7a1f9e3581fd..a0d154006889 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -26,7 +26,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/common/time-acorn.c b/arch/arm/common/time-acorn.c index d544da414731..af37bfd74f9c 100644 --- a/arch/arm/common/time-acorn.c +++ b/arch/arm/common/time-acorn.c @@ -18,7 +18,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c index 117cab30bd36..3e19985ddecb 100644 --- a/arch/arm/common/uengine.c +++ b/arch/arm/common/uengine.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/include/asm/hardware.h b/arch/arm/include/asm/hardware.h deleted file mode 100644 index eb3b3abb7db7..000000000000 --- a/arch/arm/include/asm/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/include/asm/hardware.h - * - * Copyright (C) 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Common hardware definitions - */ - -#ifndef __ASM_HARDWARE_H -#define __ASM_HARDWARE_H - -#include - -#endif diff --git a/arch/arm/include/asm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h index 7068a1c1e4e4..cf2578ffd54d 100644 --- a/arch/arm/include/asm/hardware/dec21285.h +++ b/arch/arm/include/asm/hardware/dec21285.h @@ -19,7 +19,7 @@ #define DC21285_PCI_MEM 0x80000000 #ifndef __ASSEMBLY__ -#include +#include #define DC21285_IO(x) ((volatile unsigned long *)(ARMCSR_BASE+(x))) #else #define DC21285_IO(x) (x) diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h index af64676650a2..df31b15cf6e0 100644 --- a/arch/arm/include/asm/hardware/iop3xx-adma.h +++ b/arch/arm/include/asm/hardware/iop3xx-adma.h @@ -19,7 +19,7 @@ #define _ADMA_H #include #include -#include +#include #include /* Memory copy units */ diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h index 222e74b7c463..0ebc91cb42f9 100644 --- a/arch/arm/include/asm/hardware/iop3xx-gpio.h +++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h @@ -25,7 +25,7 @@ #ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H #define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H -#include +#include #include #define IOP3XX_N_GPIOS 8 diff --git a/arch/arm/include/asm/mtd-xip.h b/arch/arm/include/asm/mtd-xip.h index 9eb127cc7db2..4bc50f9abe38 100644 --- a/arch/arm/include/asm/mtd-xip.h +++ b/arch/arm/include/asm/mtd-xip.h @@ -17,7 +17,7 @@ #ifndef __ARM_MTD_XIP_H__ #define __ARM_MTD_XIP_H__ -#include +#include #include /* fill instruction prefetch */ diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 2d84792f2e12..968b833f3bb7 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -4,7 +4,7 @@ #ifdef __KERNEL__ #include -#include /* for PCIBIOS_MIN_* */ +#include /* for PCIBIOS_MIN_* */ #define pcibios_scan_all_fns(a, b) 0 diff --git a/arch/arm/include/asm/vga.h b/arch/arm/include/asm/vga.h index 1e0b913c3d71..4f767ad3a0bb 100644 --- a/arch/arm/include/asm/vga.h +++ b/arch/arm/include/asm/vga.h @@ -1,7 +1,7 @@ #ifndef ASMARM_VGA_H #define ASMARM_VGA_H -#include +#include #include #define VGA_MAP_MEM(x,s) (PCIMEM_BASE + (x)) diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index f5cfdabcb87d..8192fe8409d3 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -46,7 +46,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S index c55aaa2a2088..79cf247ad525 100644 --- a/arch/arm/lib/ecard.S +++ b/arch/arm/lib/ecard.S @@ -12,7 +12,7 @@ */ #include #include -#include +#include #define CPSR2SPSR(rt) \ mrs rt, cpsr; \ diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S index 4ef904185142..4cc4411595f5 100644 --- a/arch/arm/lib/io-readsw-armv3.S +++ b/arch/arm/lib/io-readsw-armv3.S @@ -9,7 +9,7 @@ */ #include #include -#include +#include .Linsw_bad_alignment: adr r0, .Linsw_bad_align_msg diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S index 1607a29f49b7..0a34752bc448 100644 --- a/arch/arm/lib/io-writesw-armv3.S +++ b/arch/arm/lib/io-writesw-armv3.S @@ -9,7 +9,7 @@ */ #include #include -#include +#include .Loutsw_bad_alignment: adr r0, .Loutsw_bad_align_msg diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c index 83f57da3184c..08f030d506b8 100644 --- a/arch/arm/mach-aaec2000/aaed2000.c +++ b/arch/arm/mach-aaec2000/aaed2000.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index b016be2b0e35..2e0cec2dc997 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -20,7 +20,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index eddc882f1b4a..44690440e846 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 2d3d4b6f7b02..fc0f293174cb 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -24,7 +24,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index af2c33aff1a8..17faf3cea12f 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -28,7 +28,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 117cf6c9afce..83a4494adc9e 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -33,7 +33,7 @@ #include